ML21292A331: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot change)
(StriderTol Bot change)
Line 19: Line 19:


=Text=
=Text=
{{#Wiki_filter:}}
{{#Wiki_filter:UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 November 3, 2021 Mr. Prakash Narayanan Chief Technical Officer TN Americas LLC 7135 Minstrel Way, Suite 300 Columbia, MD 21045
 
==SUBJECT:==
PROPOSED ALTERNATIVE TO THE ASME CODE, NG-4230 TACK WELDS FOR RENEWED CERTIFICATE OF COMPLANCE NO. 1004, AMENDMENT NOS. 13, 14, 15, 16 AND 17 (DOCKET NO. 72-1004, CAC NO. 001028, EPID:
L-2021-LLR-0069) - REQUEST FOR ADDITIONAL INFORMATION
 
==Dear Mr. Narayanan:==
 
By {{letter dated|date=September 10, 2021|text=letter dated September 10, 2021}}, TN Americas LLC (TN) submitted to the U.S. Nuclear Regulatory Commission (NRC) a request for NRC to approve an alternative to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code Section III, Division 1, Article NG, Subsection NG-4000 for Visual Examination (VT) requirements of tack welds of the NUHOMS 61BTH Type 2 Dry Shielded Canister (DSC), R45 transition rails, for each of the following amendments for Renewed Certificate of Compliance No. 1004: Renewed Amendment 13, Revision 1, as corrected; Renewed Amendment 14; Renewed Amendment 15; Renewed Amendment 16; and Renewed Amendment 17.
The staff has determined that further information is needed to complete its technical review.
The request for additional information (RAI) is attached in Enclosure 1. Your response should be provided by November 19, 2021. If you are unable to meet this deadline, please notify us in writing, at least one week in advance, of your new submittal date and the reasons for the delay.
The NRC staff will then assess the impact on the current schedule to finalize the safety evaluation report and notify you of a revised schedule.
 
P. Narayanan                                Please reference Docket No. 72-1004, CAC No. 001028 and EPID: L-2021-LLR-0069 in future correspondence related to the acceptance review for this licensing action. If you have any questions, please contact me at (301) 415-6825.
Sincerely, Signed by Jacobs, Christian on 11/03/21 Christian Jacobs, Senior Project Manager Storage and Transportation Licensing Branch Division of Fuel Management Office of Nuclear Material Safety and Safeguards Docket No.: 72-1004 CAC No.: 001028 EPID: L-2021-LLR-0069
 
==Enclosure:==
 
RAI (non-proprietary)
 
ML21292A330 (pkg), ML21292A331 (ltr),
ML21292A333 (encl)
OFFICE    NMSS/DFM        NMSS/DFM        NMSS/DFM      NMSS/DFM NAME      OKhan            DDunn          ELove          TBoyce DATE      10/20/2021      10/25/2021      10/20/2021    10/25/2021 OFFICE    NMSS/DFM        NMSS/DFM        NMSS/DFM      NMSS/DFM NAME      FPeduzzi        WWheatley      CJacobs        JMcKirgan DATE      10/25/2021      10/26/2021      11/03/2021    11/03/2021}}

Revision as of 14:16, 18 January 2022

CoC 1004 - Proposed ASME Code Alternative RAI #1 - Letter
ML21292A331
Person / Time
Site: 07201004
Issue date: 11/03/2021
From: Christian Jacobs
Storage and Transportation Licensing Branch
To: Narayanan P
TN Americas LLC
Chris Jacobs NMSS/DFM/STLB 301-415-6825
Shared Package
ML21292A330 List:
References
CAC 001028, EPID: L-2021-LLR-0069
Download: ML21292A331 (3)


Text

UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 November 3, 2021 Mr. Prakash Narayanan Chief Technical Officer TN Americas LLC 7135 Minstrel Way, Suite 300 Columbia, MD 21045

SUBJECT:

PROPOSED ALTERNATIVE TO THE ASME CODE, NG-4230 TACK WELDS FOR RENEWED CERTIFICATE OF COMPLANCE NO. 1004, AMENDMENT NOS. 13, 14, 15, 16 AND 17 (DOCKET NO. 72-1004, CAC NO. 001028, EPID:

L-2021-LLR-0069) - REQUEST FOR ADDITIONAL INFORMATION

Dear Mr. Narayanan:

By letter dated September 10, 2021, TN Americas LLC (TN) submitted to the U.S. Nuclear Regulatory Commission (NRC) a request for NRC to approve an alternative to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code Section III, Division 1, Article NG, Subsection NG-4000 for Visual Examination (VT) requirements of tack welds of the NUHOMS 61BTH Type 2 Dry Shielded Canister (DSC), R45 transition rails, for each of the following amendments for Renewed Certificate of Compliance No. 1004: Renewed Amendment 13, Revision 1, as corrected; Renewed Amendment 14; Renewed Amendment 15; Renewed Amendment 16; and Renewed Amendment 17.

The staff has determined that further information is needed to complete its technical review.

The request for additional information (RAI) is attached in Enclosure 1. Your response should be provided by November 19, 2021. If you are unable to meet this deadline, please notify us in writing, at least one week in advance, of your new submittal date and the reasons for the delay.

The NRC staff will then assess the impact on the current schedule to finalize the safety evaluation report and notify you of a revised schedule.

P. Narayanan Please reference Docket No. 72-1004, CAC No. 001028 and EPID: L-2021-LLR-0069 in future correspondence related to the acceptance review for this licensing action. If you have any questions, please contact me at (301) 415-6825.

Sincerely, Signed by Jacobs, Christian on 11/03/21 Christian Jacobs, Senior Project Manager Storage and Transportation Licensing Branch Division of Fuel Management Office of Nuclear Material Safety and Safeguards Docket No.: 72-1004 CAC No.: 001028 EPID: L-2021-LLR-0069

Enclosure:

RAI (non-proprietary)

ML21292A330 (pkg), ML21292A331 (ltr),

ML21292A333 (encl)

OFFICE NMSS/DFM NMSS/DFM NMSS/DFM NMSS/DFM NAME OKhan DDunn ELove TBoyce DATE 10/20/2021 10/25/2021 10/20/2021 10/25/2021 OFFICE NMSS/DFM NMSS/DFM NMSS/DFM NMSS/DFM NAME FPeduzzi WWheatley CJacobs JMcKirgan DATE 10/25/2021 10/26/2021 11/03/2021 11/03/2021