ML17347B344
ML17347B344 | |
Person / Time | |
---|---|
Site: | Turkey Point ![]() |
Issue date: | 09/15/1989 |
From: | WOODY C O FLORIDA POWER & LIGHT CO. |
To: | |
Shared Package | |
ML17347B343 | List: |
References | |
NUDOCS 8909220152 | |
Download: ML17347B344 (709) | |
Text
ATTACHMENT 1 e FORM NIS 1 OWNER S DATA REPORT FOR INSERVICE INSPECTIONS g 1987 UNSCHEDULED OUTAGE=-8909220152 05000251 890915 PDR ADO PDC 9 E
FORM NIS-1 OWNERS'ATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules Page 1 of 15 1.Owner: Florida Power and Light Company 700 Universe Blvd.Juno Beach, Florida (Name and Address of Owner)2.Plant: TURKEY POINT NUCLEAR POWER PLANT P.O.BOX 3088, FLORIDA CITY~FLORIDA 33034 (Name and address of Plant)3.Plant Unit: 4 4.Owner Certificate of Authorization (if required)5.Commercial Service Date: 7 September 1973 6.National Board Number for Unit: N/A 7.Components Inspected:
N/A COMPONENT MANUFACTURER OR OR INSTALLER APPURTENANCE MANUFACTURER OR INSTALLER SERIAL NUMBER STATE OR NATIONAL PROVINCE BOARD NUMBER NUMBER REACTOR PRESSURE VESSEL BABCOCK&WILCOX 610-0116 4PSRV1 N/A N-161 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used provided (1)size is 8 1/2 in.x 11 in., (2)information in items 1 through 6 on this data report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
NIS-1 REPORT CONTINUED PAGE 2 OF 15 8.EXAMINATION DATES: 10 MARCH 1987'I TO 21 SEPTEMBER 1987 9.INSPECTION INTERVAL: 22 FEBRUARY 1984 TO 22 FEBRUARY 1994 a)INSPECTION PERIOD: 22 FEBRUARY 1984 TO 22 FEBRUARY 1987 10.ABSTRACT OF EXAMINATIONS:
The Inservice Examinations (ISI)of selected Class I, components of Florida Power and Light Company's (FPL)Turkey Point Plant (PTN), Unit No.4, was performed during the unscheduled outage which began on 10 March 1987.These examinations constitute the SECOND OUTAGE of the SECOND INSPECTION Period of Commercial Operation, of the SECOND TEN YEAR INSERVICE INSPECTION INTERVAL.The components were selected in accordance with the Turkey Point Long-Term Inspection Plan which was prepared to meet the requirements of Section XI of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code,"Rules for Inservice Inspection of Nuclear Power Plant Components," 1980 Edition with Addenda through Winter 1981., Manual Ultrasonic, Liquid Penetrant, Magnetic Particle and~Visual techniques were used in the performance of the~Inservice Inspection Examinations.'epresentative samples of the following components and areas were examined with nondestructive examinations (NDE)techniques.
CLASS I REACTOR PRESSURE VESSEL 4PSRV1 CLOSURE HEAD 4PSRV1 Following cleaning a detailed Visual examination (VT-1 and VT-3)was conducted in accordance with NDE Procedure No.NDE 4.1 and NDE 4.3.Additional Magnetic Particle and Ultrasonic examinations were conducted as required to supplement the visual examination results as applicable.
Magnetic Particle examinations were conducted in accordance with NDE 2.2 and the Ultrasonic examinations were conducted inaccordance with NDE 5.7, 5.10 and 5.14.
NIS-1 REPORT CONTINUED PAGE 3 OF 15 The VT-1 Visual examination was conducted to determine the condition of the part, component, or surface examined including such conditions as cracks, wear, erosion, or physical damage on the surfaces of the parts or components.
The VT-3 Visual examination was conducted to determine the general mechanical and structural conditions of the components and their supports, such as the presence of loose parts, debris, or abnormal corrosion products, wear, erosion, corrosion, and the loss of integrity at bolted or welded connections.
Additional Magnetic Particle Examinations were conducted to the extent practical to verify the presence of indications as noted during the visual examinations.
These examinations were conducted in accordance with IWB-3130 and IWB-3200 as applicable.
Ultrasonic Examinations were conducted to supplement the visual and magnetic particle examinations.
These examinations were conducted in accordance with IWB-3130 and IWB-3200 as applicable.
Prior to Unit startup, Preservice exams were performed as required by the ASME Boiler and Pressure Vessel Code,Section XI, IWA-2200.
NIS-1 REPORT CONTINUED PAGE 4 OF 15 11.ABSTRACT OF CONDITIONS NOTED: Described below by item is a summary of conditions noted during the Unit No.4 examination activity: RPV CLOSURE HEAD STUDS AS FOUND CONDITION IN PLACE UNDER TENSION Thirty three (33)studs were examined in place by the visual examination method.Of the 33 studs examined Three (3)studs were identified as having wastage of the threaded area above the nuts.These studs were number 24, 25, and 26.Five (5)RPV Studs no.23, 24, 25, 26 and 27 were ultrasonically examined from the heater hole.Stud nos 23, 24 and 27 revealed indications at the bottom of the nut, believed to be wastage.Stud nos 25 and 26 had NO RECORDABLE INDICATIONS.
ADDITIONAL SAMPLES Because of the three (3)studs with indications the sample was expanded to include five more studs no 46, 54, 2, 22 and 28.Of the five studs examined, 28 and 22 revealed the same type of indication as previous recorded in the first sample.Studs 46, 2 and 54 had no indications.
AFTER REMOVAL Seven (7)studs were Ultrasonically examined after being removed from the RPV.Stud nos 22, 23, 27, and 28 revealed NO RECORDABLE INDICATIONS Stud nos 24, 25 and 26 was examined after removal from the RPV by the Ultrasonic method.NO INDICATIONS RECORDED OTHER than the areas identified by the Visual method as having wastage.SUBSTITUTE STUDS Prior to detension of the closure head three (3)unit no.3 closure head studs no.23, 24 and 25 was visually examined prior to installation into the unit 4 RPV.NO INDICATIONS NOTED.A Magnetic Particle examination was conducted on stud no.23, 25 and 24.NO REPORTABLE INDICATION NOTED.A Ultrasonic examination of studs no 24, 25 and 26 was conducted.
Stud no.24 revealed a indication, determined to be planar indication.
Evaluated in accordance with Section XI, IWB-3515.2 and determined to be acceptable.
NIS-1 REPORT CONTINUED PAGE 5 OF 15 Following removal of stud no.24, 25 and 23 from the unit 4 RPV a Ultrasonic examination was conducted.
NO REPORTABLE INDICATIONS WERE NOTED.BASELINE EXAMINATIONS Prior to replacing the Closure Head on the vessel a 100 4 Ultrasonic and Magnetic Particle Examination was conducted on stud nos 5 through stud no.37.NO REPORTABLE INDICATIONS WERE NOTED, with the exception of Studs 24, 25 and 26, as previously discussed above.RPV CLOSURE HEAD NUTS AS FOUND CONDITION IN PLACE UNDER TENSION Thirty three (33)nuts were examined in place by the visual examination method.Of the 33 nuts examined Six (6)nuts were identified as having wastage.These nuts were number 23, 24, 25, 26, 27 and 28.AFTER REMOVAL Except for minor rust deposits, no further damage was noted on nut no.24, 25 and 26 since the last as found visual.SUBSTITUTE NUTS Prior to detension of the closure head three (3)unit no.3 closure head nuts no.23, 24 and 25 was visually examined prior to installation into the unit 4 RPV.NO INDICATIONS NOTED.A Magnetic Particle examination was conducted.
on nut no.23 24 and 25.NO REPORTABLE INDICATIONS WERE NOTED.Nut nos 24, 25 and 26 was ultrasonically examined prior to going into unit no.4.NO INDICATIONS NOTED.BASELINE EXAMINATIONS Prior to replacement of the Closure Head on the Vessel a 100 4 Magnetic Particle examination was conducted on Nuts no.5 through Nut'o.37.NO REPORTABLE INDICATIONS WERE NOTED.RPV CLOSURE HEAD WASHERS (LARGE&SMALL)AS FOUND CONDITION IN PLACE UNDER TENSION Sixty six (66)washers, 33 small and 33 large were examined in place by the visual examination method.Of the 66 washers examined 8 were identified as having erosion, (4 small and 4 large).These washers were 24, 25, 26 and 27.
NIS-1 REPORT CONTINUED PAGE 6 OF 15 AFTER REMOVAL Except for minor rust deposits, no further damage to the large and small washers was noted since the as found visual on washers no.25, 26,27 and 24.SUBSTITUTE WASHERS Prior to detension of the closure head, six (6)unit no.3 closure head large and small washers, (3)each, nos.23, 24 and 25 were visually examined prior to installation into the unit 4 RPV.NO INDICATIONS NOTED.BASELINE EXAMINATIONS Prior to replacing the Closure Head back on the Vessel a 100 4 Visual VT-1 examination was conducted on both the small and large washers from no.5 through no.37.RPV CLOSURE HEAD BASE MATERIAL AS FOUND CONDITION Two areas were identified during the visual examination as having some wastage.(1)The base metal around the LEAKING.CONOSEAL PENETRATION (4-CS-53)was noted as having an area approximately 8 1/2" long by 1 1/4" at the widest part, with depth of wastage to be 1/4", 1/8", 1/16".There was also some wastage noted in the gap between the closure head and the conoseal.MCI-NCR-87-01 was submitted to engineering for surface preparation requirements prior to follow-up magnetic particle and ultrasonic thickness examinations.
(2)The Closure Head Flange surface showed evidence of wastage between stud hole 25 and 24,and 24 and 23.Each area had an approximate depth of 1/16" at the deepest point.MCI-NCR-87-02 was submitted to engineering for surface preparation requirements prior to performing magnetic particle examinations.
After insulation removal a Visual (VT-1)examination was conducted on the closure head base metal to determine if any wastage exists other than those already noted.Two additional areas were noted: 1.A 2 inch by 1/2" and approximately
.1" depth right below the leaking conoseal.This area was included within the initial visual examination data.0 NIS-1 REPORT CONTINUED PAGE 7 OF 15 2.Two (2)areas were noted near the support lug: a.A 1" by 7" area b.A 1" round area.3.In addition to the above areas, A suspect area was identified as being, an 18" area running from the Conoseal penetration to the closure head flange surface.BASELINE EXAMINATIONS Prior to return to service a magnetic particle examination of the damaged area and a continuous ultrasonic thickness measurement was performed.
CONOSEAL (MALE CONNECTIONS)
REMOVED FROM CONOSEAL Following removal of the conoseal parts from the RPV Head, a visual examination of the following parts was conducted.
All parts had evidence of boric acid accumulation and or residue Identified below by item are the results of the exams.SPLIT RING-Boric acid residue CLAMP-The O.D.surface have corrosion and pitting.The inside surface has major wastage.JACK SCREWS-All bolts have pits and corrosion One (1)stud has wastage on the shank.FLANGE CONNECTION
-boric acid residue on parts.LOWER GASKET-scratch, crimped area and nicks on edge.UPPER GASKET-severely bent and deformed.SEAL WELD RING-broken in half, minor dents and nicks, and edges are bent in several locations.
HEAD PORT ADAPTER-Two dents on female end, Two (2)linear indications, gouges and nicks.
NIS-1 REPORT CONTINUED PAGE 8 OF 15 SHROUD SUPPORT LUG AS FOUND CONDITION During the Visual (VT-3)examination of the shroud support lug Heavy wastage of the support bracket was noted.The as left configuration of the shroud support lug was documented by sketches.CLOSURE HEAD LIFTING LUG AS FOUND CONDITION No recordable indications were noted, other than boric acid build-up around lug.FOLLOWING CLEANING Prior to head lift and after cleaning of the lifting lug a Magnetic Particle examination was conducted of the welded lug attachment to the closure head and the surrounding base metal.NO RECORDABLE INDICATIONS WERE NOTED.
NIS-1 REPORT CONTINUED PAGE 9 OF 15 12.ABSTRACT OF CORRECTIVE MEASURES RECOMMENDED AND TAKEN: All indications noted were evaluated in accordance with the requirements of the'ASME Boiler and Pressure Vessel Code,Section XI (were acceptance criteria exists).All indications exceeding the acceptance criteria were included in a nonconformance report and submitted to engineering for evaluation.
12 F 1 RPV CLOSURE HEAD STUDS 12.1.1 REPLACEMENT Studs nos 22, 23, 24, 25, 26, 27 and 28 were replaced in accordance with IWB-7000 prior to the units return to service.12.1.2 UNIQUE IDENTIFICATION Prior to placement of the new studs in the closure head, each stud was stamped to conform with the stud hole location as follows: MFG.S/N NEW ID NO-NOTE THE"R" AFTER THE ID NO, STANDS FOR D12 22R REPLACEMENT B7 23R D14 24R C10 25R A3 26R B8 27R Al 28R 12.1.3 PRESERVICE EXAMINATIONS Each stud received a preservice examination that included a Visual VT-1, Magnetic Particle and Manual Ultrasonic examination from the ID surface of the Heater Hole.No Indications Were Noted.12.2 RPV CLOSURE HEAD NUTS 12.2.1 REPLACEMENT Nuts no.22 through 28 were replaced in accordance with IWB-7000 prior to the units return to service.
NIS-1 REPORT CONTINUED PAGE 10 OF 15 12.2.2 UNIQUE IDENTIFICATION Prior to placement of the new nuts in the closure head, each nut was stamped with the hole number as follows: NEW MFG E13 El E14 E10 E8 E15 E7 NEW NUT 22R 23R 24R 25R 26R 27R 28R NOTE'N>>R" WAS ADDED TO IDENTIFY A REPLACEMENT 12'.3 PRESERVICE EXAMINATION Each nut received a preservice examination that consisted of a Visual VT-1, a Magnetic Particle and Ultrasonic examination.
The UT exam was conducted from the outside surface.No Indications Noted.12.3 RPV CLOSURE HEAD WASHERS (LARGE&SMALL)12.3.1 REPLACEMENT Washers (Large and Small)numbers 22 through 28 were replaced in accordance with IWB-7000 prior to the units return to service.12.3.2 UNIQUE IDENTIFICATION Prior to placement of the washers in to the closure head, each washer was stamped with a number to conform with the stud hole location as follows: NEW MFG LW H3H H2F H4K H50 H4L H1B H5P SW K2H K2F K3K K40 K3L K1B K4P NEW WASHER 22R 23R 24R 25R 26R 27R 28R 22R 23R 24R 25R 26R 27R 28R NOTE: THE" R" WAS INCLUDED TO SIGNIFY A REPLACEMENT 10 NIS-1 REPORT CONTINUED 12.3.3 PRESERVICE EXAMINATION PAGE 11 OF 15 Prior to placement of the new washers in the closure head a preservice examination consisting of a Visual VT-1 examination was conducted.
No Indications Noted.12 4 RPV CLOSURE HEAD BASE METAL 12.4.1 CONOSEAL PENETRATION The area with wastage was magnetic particle examined no indications noted.A ultrasonic thickness measurement of the area was performed.
All areas of wastage did not exceed the acceptance criteria for min.wall.12.4.2 CLOSURE HEAD FLANGE SURFACE The areas noted were magnetic particle examined and no indications noted.The depth of the wastage did not exceed the min.wall acceptance criteria.12'.3 BASELINE EXAMINATIONS The above areas were acceptable by examination, no further action required.12.5 CONOSEAL 12~5~1 REPLACEMENT The Instrument port column female flange was replaced by Westinghouse on the leaking Conoseal penetration number 53.t 12.5.2 IDENTIFICATION The upper female flange to head adapter seal weld identified as 4-CS-02 was cut out and replaced.12.5.3'RESERVICE EXAMINATION Prior to return to service, The upper female flange to head adapter seal weld was visual and liquid penetrant examined after replacement.
No Indications Noted.12.6 SHROUD SUPPORT LUG Prior to return to service, The Shroud Support Lug was repaired.The repair was in accordance with IWB-4000.11 NIS-1 REPORT CONTINUED PAGE 12 OF 15 12.6.1 REPAIR The repair consisted of cutting the remaining lug off at the top of the weld and rewelding a new segment to the existing remnant piece.12.6.2 PRESERVICE EXAMINATION Prior to the units return to service a magnetic particle examination was conducted.
No Indications noted.12~7 CLOSURE HEAD LIFTING LUG A Visual VT-3 examination was conducted of the lug in the as found condition.
After cleaning a magnetic Particle examination was conducted.
No Indications Noted.12.7.1 USE AS IS In accordance with IWB-3122.1 the examination performed are acceptable for continued service.12.7.2 BASELINE EXAMINATIONS The magnetic Particle examinations serves as a baseline examination.
12.8 PREVIOUS EXAMINATIONS All recorded indications were verified against previous examination documentation.
Attached within the Final Report are the examination documentation for the studs, nuts, and washers, from the PSI and subsequent ISIs.OUTAGES PRESERVICE EXAMINATIONS FIRST ISI SECOND ISI THIRD ISI FORTH ISI FIFTH ISI YEAR 1972 1976 1979 1982 1984 1986 12 NIS-1 REPORT CONTINUED PAGE 13 OF 15 Components whose visual examination reveals surface flaw indications are deemed unacceptable for service unless the results of a supplemental surface or volumetric examination satisfy the requirements as stated above.All Visual examinations during the as found activity was compared against the corrective measures identified in IWA-5250 (b), which states the following:
The detection of boric acid residues on ferritic steel components shall require the location of the leakage source and the areas of a general corrosion that reduce the wall thickness by more than 104 shall be evaluated to determine whether the component may be acceptable for continued service or repair or replacement is required.13 NIS-1 REPORT CONTINUED PAGE 14 OF 15 We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Code,Section XI.OWNER: FLORIDA 0 R and LIGHT COMPANY DATE: 8 3<>Pl SIGNED BY: CERTIFICATE OF AUTHORIZATION NO.(IF APPLICABLE)
EXPIRATION DATE: N/A N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of Dade County, Florida and employed by ARKWRIGHT MUTUAL INSURANCE COMPANY of NORWOOD, MASSACHUSETTS have inspected the components de cribed in th's OWNERS'ata Report during the period to g/P , and state that to the best.of my k ow edge and belief, the Owner has performed examinations and taken corrective measures described in the Owners'ata Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of'ny kind arising from or connected with this inspection.
Da:$0 198 7 FACTORY MUTUAL SYSTEM COMMISSION NO.4956 (N)(I)Inspector's S'ature National Board, State, Province and NO 14 1.OWNER 2.PLANT: NIS-1 REPORT CONTINUED SUPPLEMENTAL SHEET NIS-1 FLORIDA POWER and LIGHT COMPANY 700 UNIVERSE BLVD.ZUNO BEACH, FLORIDA TURKEY POINT NUCLEAR POWER PLANT P.O.BOX 029100 MIAMI, FLORIDA page 15 of 15 3.PLANT UNIT: 4 4.OWNERS CERTIFICATE OF AUTHORIZATION:
N/A 5.COMMERCIAL SERVICE DATE: 7 September 1973 6~NATIONAL BOARD NUMBER FOR UNIT: N/A 10.REPORT NUMBER ORGANIZATION DESCRIPTION OF SERVICE L-87-186 FP&L REPORT ON INSTRUMENTATION PORT COLUMN ASSEMBLY LEAKAGE MP 2.7.1/FLA-4 WESTINGHOUSE CHANGEOUT OF INSTRUMENT PORT COLUMN FEMALE FLANGE AT TURKEY POINT UNIT 4 SLA-033187-1 WESTINGHOUSE 51-1168371-00 BABCOCK&WILCOX EVALUATION OF MINIMUM PENETRATION REINFORCEMENT SHROUD SUPPORT SEGMENT&SUPPORT LUG INSTALLATION GUIDELINES RB870320 WESTINGHOUSE RV STUD FAILURE SEQUENCE EVALUATION 51-1168363-01 BABCOCK&WILCOX TURKEY POINT REACTOR VESSEL STUD REPLACEMENT 15 FORM NIS-2 OWNERS'EPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.OWNER: Florida Power&Light Co.ADDRESS: 700 Universe Blvd.JUno Beach, Florida 33408 2.PLANT: Turkey Point Plant ADDRESS: P.O.Box 3088 Florida City, Florida 33034 DATE: 15 MARCH 1989 SHEET 1 OF 4 UNIT: 4 WESTINGHOUSE ELECTRIC (REPAIR ORGANIZATION)
P.O.93099-76897 (P.O.NO.JOB NO., etc.)TYPE CODE SYMBOL STAMP:N/A AUTHORIZATION NO.: N/A N/A 4.IDENTIFICATION OF SYSTEM: Reactor Coolant System 3.WORK Florida Power&Light PERFORMED BY: EXPIRATION DATE: 5.(a)APPLICABLE CONSTRUCTION CODE: Section III, 1983 Edition through Summer'984 Addenda Regulatory Guide 1.65 October 1973 (b)APPLICABLE EDITION OF SECTION XI UTILIZED FOR REPAIR OR REPLACEMENT 1980 Edition through Winter 1981 Addenda 6.IDENTIFICATION OF COMPONENTS REPAIRED OR REPLACED AND REPLACEMENT COMPONENTS NAME OF COMP NAME OF MANFG MFG.SERIAL NUMBER NAT'L BOARD OTHER NO.IDENT YEAR BUILT REPAIRED, ASME REPLACED, CODE REPLACEMENT STAMPED YES/NO REACTOR BABCOCK PRESSURE AND VESSEL WILCOX 610-0110 N-161 4PSRV1 1970 REPLACEMENT YES 7.DESCRIPTION OF WORK: Replace existing Reactor Pressure Vessel Closure Head studs, nuts, large and small washers numbers 22 through 28.Replaced original material SA-320 L43 with SA-540 Grade B24 class 3.16 NIS-2 OWNERSI DATA REPORT CONTINUED PAGE 2 OF 4 8.TEST CONDUCTED:
[X]PNEUMATIC[]NORMAL OPERATING PRESSURE[]OTHER[]PRESSURE: 2335 PSIG TEST TEMPERATURE:
547 DEGREES F NOTE: Test conducted during RCS overpressure test 9.REMARKS: B&W performed suitability of replacement evaluation document no.51-1168363-01.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the (Repair/Replacement)
ASME Code Section XI.Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expirat'on Date: N/A Signed Date g.~,19'~OWNE~O OWNERS'ESIGNEE, TITLE CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of DADE COUNTY, FLORIDA and employed by ARKWRIGHT MUTUAL INSURANCE COMPANY of NORWOOD, MASSACHUSETTS have inspected the components described in thisOwners'eport during period.O P7 to J'nd state that to the best of my knowledge and be ief, he Owner has performed examinations and taken corrective measures described in this Owners'eport in accordance with the requirements of the ASME Code,Section XI.By signing this certification neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners'eport.
Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this in ction I SPECTOR'S SIGN RE COMMISSION NUMBER: 4956 (N)(I)(NATIONAL BOARD, STATE, PROVINCE and ENDORSEMENTS)
DATE: 0 19 FORM NIS-2 OWNERS'EPORT FOR REPAIRS OR REPLACEMENTS 17 As Required by the Provisions of the ASME Code Section XI CONTINUATION SHEET l.OWNER: Florida Power&Light Co.ADDRESS: 700 Universe Blvd.Juno Beach, Florida 33408 2.PLANT: Turkey Point Plant ADDRESS: P.O.Box 3088 Florida City, Florida 33034 DATE: 16 MARCH 1989 SHEET 3 OF 4 UNIT: 4 P.O.93099-76897 WESTINGHOUSE ELECTRIC (REPAIR ORGANIZATION P.O.NO JOB NO., etc.)3.WORK Florida Power&Light TYPE CODE SYMBOL STAMP:N/A PERFORMED AUTHORIZATION NO.: N/A BY: EXPIRATION DATE: N/A 4.IDENTIFICATION OF SYSTEM: Reactor Coolant System 5.(a)APPLICABLE CONSTRUCTION CODE: Section III, 1983 Edition through Summer 1984 Addenda Regulatory Guide 1.65 October 1973 (b).APPLICABLE EDITION OF SECTION XI UTILIZED FOR REPAIR OR REPLACEMENT 1980 Edition through Winter 1981 Addenda 6.IDENTIFICATION OF PARTS OR ITEMS REPAIRED OR REPLACED AND REPLACEMENT COMPONENTS SUPPLEMENTAL INFORMATION NAME NAME OF OF AFFECTED MANUFACTURER PART MANUFACTURER SERIAL NUMBER ISI PROGRAM IDENT.NUMBER REPAIRED, REPLACED, REPLACEMENT RPV STUDS RPV NUTS PMC INDUSTRIES PMC INDUSTRIES 117894E ITEM 62 117894E ITEM 63 4-CH-S22R THRU 4-CH-S28R 4-CH-N22R THRU 4-CH-N28R REPLACEMENT REPLACEMENT RPV LARGE WASHER RPV SMALL WASHER PMC INDUSTRIES PMC INDUSTRIES 117894E ITEM 64 117894E ITEM 65 4-CH-LW22R THRU 4-CH-LW28R 4-CH-SW22R THRU 4-CH-SW28R REPLACEMENT REPLACEMENT FORM NIS-2 OWNERS'EPORT FOR REPAIRS OR REPLACEMENTS 18 As Required by the Provisions of the ASME Code Section XI CONTINUATION SHEET 1.OWNER: Florida Power&Light Co.DATE: 16 MARCH 1989 ADDRESS: 700 Universe Blvd.Juno Beach, Florida SHEET 4 OF 4 33408 2.PLANT: Turkey Point Plant UNIT: 4 ADDRESS: P.o.Box 3088 Florida City, FloridaWESTINGHOUSE ELECTRIC (REPAIR ORGANIZATION P.OS NO~, JOB NO., etc.)3.WORK Westinghouse Electric Corp TYPE CODE SYMBOL STAMP: N/A PERFORMED Pittsburgh, Penn.AUTHORIZATION NO.: N/A BY: 15230 EXPIRATION DATE: N/A 4.IDENTIFICATION OF SYSTEM: Reactor Coolant System 5.(a)APPLICABLE CONSTRUCTION CODE:SECTION III 1977 EDITION THROUGH SUMMER 1978 ADDENDA (b)APPLICABLE EDITION OF SECTION XI UTILIZED FOR REPAIR OR REPLACEMENT 1980 EDITION THROUGH WINTER 1981 ADDENDA 6.IDENTIFICATION OF PARTS OR ITEMS REPAIRED OR REPLACED AND REPLACEMENT PARTS OR ITEMS SUPPLEMENTAL INFORMATION NAME NAME OF OF AFFECTED MANUFACTURER PART MANUFACTURER SERIAL NUMBER ISI PROGRAM IDENT.NUMBER REPAIRED, REPLACED, REPLACEMENT INST.PORT COLUMN FEMALE FLANGE WESTINGHOUSE ELECTRIC CORPORATION P87-3210 S/N C42304 4-CS-53 REPLACEMENT 7.DESCRIPTION OF WORK: Westinghouse performed replacement of Instrument Port Column Female Flange under document MP 2.7.1/FLA-4.
Y-INSERT QR-7949 HEAT NUMBER S468433 FEMALE FLANGE HEAT NUMBER 646876, DRAWING NUMBER 6121E91 CUSTOMER ORDER: C 93099-37284 19 DATE: 07/07/89 REVISION: 3 REACTOR PR SSURE VESSE TURKET POIHT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIM, SECOND IN'IERVAL CLASS 1 COHPOHEHTS PAGE: 'ZONE NUHBER: 001 SUHHARY EXAHINAI'ION AREA HUHBER IDENT IF ICAT ION ASNE SEC.XI CATGY EXAH ITEH HO HETHOO PROCEDURE T N I ONG RSE E I 0 CGH E REHARKS R<<<<CALI BRAT IOH BLOCK<<4PSRV1 R F.DIIG HO.004.V1 007500 4.LIG.24 FLAHGE LIGAHEHT AREA 58'EVEL 8G1 VT-3 86.40 VT-3 PRECLEAN 4.3 6 C AFTER 4.3.6 C C 4-27.87 PIT Q EDGE OF COUHTERBORE,BORON DEPOSITS, SLIGHT'NASTAGE, SEE VIDEO TAPE H-9:*Ul'-14*<<007600 4.LIG.25 FLANGE LIGAHENT AREA 58'EVEL 8 G 1 VT.3 86.40 VT-3 PRECLEAN 4.3 6 C AFTER 4.3 6 C C 4-27-87 TOP TEN THREADS EXIBIT CORROSION DEPOSITS, SLIGHT PITTING, SEE VIDEO TAPE M-7: AFTER CLEANING SEE VIDEO TAPE Q.B:<<UT-14*<<007700 4 LIG 26 FLANGE LIGAIIENT AREA 58'EVEL 8.0.1 VT-3 86.40 VT-3 PRECLEAH 4.3 6 C AFTER 4.3 6 C 4-27.87 RUST(BORON DEPOSITS, HINOR C HASTAGE Q EDGE OF CCUNTERBORE AND FIRST THREAD,FOR AFTER CLEANING SEE VIDEO TAPE M.10:~<<UT 14<<*
DATE: 07/07/89 REVISION: 3 RPV CLOSUR HEAD TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIX), SECOND INTERVAL CLASS 1 CCHPOHEHTS PAGE: 2 ZONE NUHBER: 002 SUHHARY EXAHINATIOH AREA KUKSER IDENT IF ICATION ASHE SEC.XI CAlGY EXAH ITEN NO HElHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REHARXS T C 0 H R 1*CALIBRATIOH BLOCK R F D HO 004-011800 4 HH-12 FLANGE TO DOKE MELD 58'EVEL 8-A 81.40 Hl NDE 2.2-5 UT 0 HT'L HDE 5.14-1 UT 0 QRV HOE 5.14 2 UT 45 AX NDE 5.14 3 Ul'5 CIRC KDE 5.14-3 Ul 60 AX HOE 5.14-4 Ul 60 CIRC NDE 5.1C-4 Vl-1 NOE 4.1-9 C C C C C C C C C-10.87 Hl COHPLETE EXAH FRQI STIXI HOLE 5 TO STUD HOLE 37: 0 Hl'L 18" AREA FRCH COHOSEAL lO FLANGE T17.0": 4-10 87 Ul COMPLETE t>>U T 21*012200 4 FS-4 OUTSIDE FLANGE SURFACE 58'EVEL S.A VT-1 81.CO HT NOE 4.1 9 C C 87 CCHPLETE MPH/APP 012300 C-FS.5 OUTSIDE FLANGE SURFACE 58'EVEL B.A Vl 1 81.40 HT KOE 4.1-9 C C 87-COHPLETE*PH/AP>>012400 4-FS 6 OUTSIDE FLANGE SURFACE 58'EVEL B.A VT.1 NOE 4.1.9 C C 87-COHPLETE 81.40 HT**H/A**012500 4.FS.'7 OUTSIDE FLANGE SURFACE 58'EVEL 8 A 81.40 VT-1 NOE C.1-9 C C 87-COHPLETE Hl t*N/A11 012600 C.f S.8 OUTSIDE fLANGE SURFACE 58'EVEL 8 A VT-1 HDE 4.4.9 C C 87 COHPLETE 81.40 Hl ttN/A11 DATE: 07/07/89 REVISION: 3 RPV CLOSUR M AD TURKEY POINt NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERICO, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 3 ZONE NUHBER: 002
SUMMARY
EXAHI HAT TOM AREA NUMBER IDENT I F I CAT ION ASNE SEC.XI CATGY EXAH ITEH NO METHOD N I 0 S ON 0T T RSEH A E I 0 E REMARKS PROCEDURE T C G H R~CALIBRATION BLOCK~*R F DUG NO.004-012700 4.FS.9 OUTSIDE FLANGE SURFACE 58'EVEL B A VT-1 81.40 Ht NDE 4.1-9 C C 87-CCHPLETE*AN/A11 012800 4.FS-10 IXITSIDE FLANGE SURFACE 58'EVEL 8-A VT-1 NDE 4.1.9 C C 81.40 HT 87-COMPLETE**N/A~~012900 4 FS 11 OUTSIDE FLANGE SURFACE 58'EVEL 8-A VT-1 81.40 HT NDE 4~1-9 C C 87-COMPLETE~*N/A~~013000 4 FS-12 OUTSIDE FLANGE SURFACE 58'EVEL B.A VT-1 NDE 4.1-9 C C 87-COMPLETE 81.40 Ht 4tH/A1*013100 4.F S.13 OUTSIDE FLANGE SURFACE 58'EVEL 8 A 81.40 Vt-1 MDE 4.1-9 C C 87-COMPLETE Ht~~N/A~~013200 4 FS-14 OUtSIDE FLANGE SURFACE 58'EVEL 8-A VT-1 81.40 HT NDE 4.1-9 C C 87-COMPLETE~~N/A*>>013300 4 FS 15 OUTSIDE FLANGE SURFACE 58'EVEL B.A VT-1 NDE 4.1.9 C C 87.COHPLEtE 81.40 HT*~N/A~*
DATE$07/07/89 REVISION$3 RPV CLOSUR HE TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE$4 ZONE NUHBER$002 SUWQRY EXAMINATION AREA NUMBER IDENT IF ICATION ASNE SEC.XI CATGY EXAM ITEN MO HETHOD PROCEDURE N I 0 8 ONGT T RSEH A E I 0 E REHARVS T C 0 H R>>>>CALIBRATIOH BLOCK*R F.DIJG MO.004-V 013400 4-FS-16 OUTSIDE FLANGE SURFACE 58'EVEL 8 A Vt-1 KDE 4.1-9 C C 87-CQIPLETE 81.40 HT>>>>N/A>>*013500 4 FS-17 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 81.40 HT HDE 4.1.9 C C 87-COMPLETE**N/A>>>>013600 4-FS-18 OUTSIDE FLANGE SURFACE 58'EVEL 8-A VT-1 NDE 4.1.9 C C 87-COMPLETE 81.40 MT>>>>H/A>>>>013700 4-FS-19 OUTSIDE FLANGE SURFACE 58'EVEL 8-A Vt-1 81.40 HT NDE 4.1-9.C C 87-COMPLETE*>>H/A>>>>013800 4.FS-20 IXJTSIDE FLANGE SURFACE 58'EVEL B.A VT.1 NDE 4.1 9 C C 87-COMPLETE 81 40 HT>>>>H/A>>>>013900 4-FS.21'XJTSIDE FLANGE SURFACE 58'EVEL 8-A 81.40 VT-1 NDE 4.'I 9 C C 87 COMPLETE HT N/A 014000 4.FS.22 IXJTSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 HDE 4.1 9 C C 87-COMPLETE 81.40 NT*>>N/A>>*
DATE: 07/07/89 REV I SION: 3 RP LOSURE HEAD TURKEY POINT NUCLEAR PLANT UHIT 4 IHSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIXI, SECOND IHTERVAL CLASS 1 COHPONEHTS N I 0 PAGE: 5 ZONE NUHBER: 002 SUHHARY EXAHINA'TION AREA NINISER IDENT IF ICATIOH ASHE SEC.XI CATGY EXAH I TEH NO HETHCO PROCEDURE S OHGT RSEN A E I 0 E REHARKS T C G H R>>>>CALIBRATICH BLOCK>>R F OMG NO.004 V 014100 4.F S-?3 OUTSIDE FLANGE SURFACE 58'EVEL B.A VT-1 81.40 HT NDE4~19 C C 3 27-87-AN APPROX.2" S'Y 2" AREAS HAS MASTAGE BETMEEH 23 AND 24.>>>>N/A>>>>014200 4-FS-24 OUtSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 81.40 HT NOE 4.1-9 C 3 27 S7.A 2" BY 2" AREA OF MAStAGE BETMEEH NOLE 23 ANO 24.4-10 87 HT CONDUCTED.
>>*N/A>>>>OIC300 4.FS-25 OUTSIDE FLANGE SURFACE 58'EVEL BA V1'1 81.40 Ht NDE 4.1-9 C C 3-27-87-A 2" BY 2" AREA NAS MASTAGE.4-10-87 HT CONDUCTED FOR SURFACE IRREGULARITIES.
- H/A>>*014400 4.FS-26 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT-T NDE 4.1-9 C C 87-CCHPLETE 81.40 Ht>>*N/A>>>>014500 4~FS 27 OUTSIDE FLANGE SURFACE 58'EVEL 8 A Vt-1 81.CO Ht NDE 4.1-9 C C 87 COHPLETE>>>>N/A*>>01C600 C-FS-28 OUTSIDE FLANGE SURFACE 58'EVEL 8-A VT-1 NOE C.1-9 C C 87-CCHPLETE 81.40 HT>>>>H/A>>>>014700 4.FS.29 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 NOE C.1.9 C C 87-COHPLETE 81.40 Ht>>>>N/A>>>>
DATE: 07/07/89 REVISION: 3 RPV OSURE H AO TURKEY POINT NUCLEAR PLAHT UMIT 4 INSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), F!RST PERIJXJ, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 6 ZONE NUHSER: 002 SUHHART EXAHIHATIOH AREA KUHSER I DENT IF I CAT I OH ASHE SEC.Xl CAT GT EXAH ITEH NO HETNCO PROCEDURE H I 0 8 ONGT T RSEH A E I 0 E REHARXS T C 0 H R*tCALIBRA'IIOH BLOCX t R F DUG.HO 004-014800 4-FS 30 IXJTSIDE FLANGE SURFACE 58'EVEL 8 A VT-I HDE 4.1.9 C C 87~COMPLETE 81.40 HT ttM/At*01C900 4 FS-31 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 MDE 4.1-9 C C 87-COMPLETE 81;40 HT ttH/Att 015000 C-FS 32 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 NOE C.1-9 C C 87-CCHPLETE 81.40 HT ttM/Att 015100 4-FS-33 OUTSIDE FLANGE SURFACE 58'EVEL 8 A 81.40 VT 1 NOE 4.1-9 C C 87-COMPLETE HT**H/At*015200 C.FS-34 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT-1 81.40 HT NDE C.1-9 C C 87-CCHPLETE ttH/At*015300 4-FS.35 QJTSIOE FLANGE SURFACE 58'EVEL S.A VT-1 NOE 4.1.9 C C 87-CCHPLETE 81.40 HT*tM/Att 015COO 4-FS-36 JXJTSIOE FLANGE SURFACE 58'EVEL 8 A 81.CO VT-1 HT NDE 4.1.9 C C 87-CCHPLETE**M/A**
DATE: 07/07/89 REVISION: 3 RPV CLOSUR HEAD TURKET POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTIOH FINAL REPORT TABLES IXITAGE 2 (1987), FIRS'I PERIOD, SECOND INTERVAL CLASS 1 CCHPONENTS PAGE: 7 ZONE NUHBER: 002 SUHHARY EXAHIHAT I OH AREA NUHBER IDENT IF ICATION ASHE SEC.XI CATGT EXAH ITEN HO HETHOO PROCEDURE N I 0 8 OHGT T RSEH A E I 0 E REHARKS T C 0 H R~*CALIBRATIOH BLOCK~R F NO 004-V2 015500 4-FS-37 OUTSIDE FLANGE SURFACE 58'EVEL 8 A VT.1 8'I 40 HT NDE 4.1-9 C C 87 COHPLETE*+N/A'++018000 4 FF H4 B.A VT-1 NDE 4.1-11 C C 3.19.87 CCHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL fON/A10 018100 4-FF-HS B.A VT-.1 NDE 4.1-11 C C 3-19.87 COHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL 44N/A%0 018200 4 FF H6 FLANGE FACE SURFACE ON HEAD 58'EVEL 8 A VT-1 NDE 4.1-11 C C 3 19 87 COHPLETE 81.40%*N/JPO 018300 4 FF-H7 B.A VT 1 HDE 4.1-11 C C 3 19 87 CCHPLETE FLANGE FACE SURFACE OH HEAD 81 40 58'EVEL 4*N/A**018400 4-FF-HB 8-A VT-1 NDE 4.1-11 C C 3-19.87 CCHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL*1H/A%4 018500 4.FF-H9 B A VT-1 NDE 4.1-11 C C 3-19-87 COHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL~tN/Atf DATES 07/07/89 REV IS ION: 3 RPV C OSUR HEAD TURKET POIHT NUCLEAR PLAHT UNIT 4 IHSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987>, FIRST PERIIXI, SECOND INTERVAL CLASS 1 COHPOHEH'IS PAGE: 8 ZONE NUMBER: 002 SQBIART EXANINATIOH AREA NUMBER IDEN'TIFICATION ASHE SEC.XI CATGY EXAM ITEN NO METHOD PROCEDURE H I 0 S ONGT RSEH A E I 0 E REHARKS T C G H R*~CALIBRATION BLOCK~R F IJG NO 004-018600 4-F F.H10 FLANGE FACE SURFACE OM HEAD 58'EVEL 8-A VT-1 81.40 HDE 4.1-11 C C 3-19.87 COMPLETE~aH/Aa*018700 4-FF H11 8-A VT-1 MDE 4.1-11, C C FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL 3 19-87 COMPLETE**H/A~*018800 4-FF H12 8 A VT-1 NDE 4.1-11 C C FLANGE FACE SURFACE OH HEAD 81.40 58'LEVEL 3 19 87 COMPLETE 018900 4-FF H13 8-A VT-1 HDE 4.1-11 C C FLANGE FACE SURFACE OM HEAD 81.40 58'EVEL 3-19 87 COMPLETE~~H/A~~019000 4.FF-H14 8 A VT-1 NDE 4.1-11 C C FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL 3 19-87 COMPLETE 41H/AOO O'19100 4.FF H15 8 A VT-1 MDE 4.1 11 C C FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL 3 19 87 COMPLETE*1H/AIN 019200 4-FF.H16 B.A VT 1 NDE 4.1-11 C C FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL 3.19-87 COHPLETE**H/A~~
DATE: 07/07/89 REVISION: 3 RPV OSUR H TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987)~FIRST PERIIe, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 9 ZONE NUMBER: 002 SUHHARY EXAIIIHATIOH AREA NUHBER IDENT IF ICATION ASHE SEC~XI CATGY EXAH I TEH MO HETHCO PROCEDURE N I 0 8 ONGT T RS EH A E I 0 E REHARKS T C 0 H R t*CALIBRATION BLOCK*R F NG MO 004-V2 019300 4.FF-H17 FLANGE FACE SURFACE OH HEAD 58'EVEL B A VT-1 81.40 NDE 4.1-11 C C 3-19-87 COMPLETE**H/Att 019400 4 FF-H18 B.A VT-1 NDE 4.1.11 C C 3.'19-87 COHPLETE FLANGE FACE SURFACE ON HEAD$1.40 58'EVEL**H/Att 019500-4~FF.H19 FLANGE FACE SURFACE OH HEAD 58'EVEL 8-A VT-1 81.40 NDE 4.1.11 C C 3-19.87 COMPLETE ttH/Att 0'19600 4 FF-H20 BA VT1 NDE4~111 C C 3-19-87 COMPLETE FLANGE FACE SURFACE OH NEAD 81.40 58'EVEL ttH/Att 019700 4 FF-H21 8 A VT-1 MDE 4.1-11 C C 3-19 87 COMPLETE FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL*tH/At*019800 4-FF-H22 8-A VT 1 NDE 4.1-11 C C 3-19 87 COHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL ttH/Att 019900 4-FF-H23 B A VT-1 e NDE 4.1-11 C C 3-19-87 COMPLETE FLAMBE FACE SURFACE OM NEAO B1.40 58'EVEL**H/A*t DATE: 07/07/89 REV IS ION: 3 RPV CLOSUR HEAD TURKET POIHT NUCLEAR PLAHT UHIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIXI, SECOND INTERVAL CLASS 1 COHPOHEHTS PAGE: 10 ZONE NUHBER: 002 SUHNARY EXAHINATIOH AREA NUHBER IDENT IF I CATION ASHE SEC.XI CATGY EXAH ITEN HO HETNOD PROCEDURE N I 0 8 ONGT T RSEH A E I 0 E RENARKS T C G H R~~CALIBRATIOH BLOCX~N 004-020000 4-FF-H24 B.A VT-1 NDE 4.1 11 C C 3-19.87 COHPLETE FLANGE FACE SURFACE OH HEAD 81 40 58'EVEL*1H/AN*020100 4-FF-H25 8 A VT-1 HDE 4.1-11 C C 3-19 87 COHPLETE FLANGE FACE SURFACE ON HEAD 81 40 58'EVEL**H/A~*020200 4 FF-H26 B.A VT-I HDE 4.1-11 C C 3.19.87 CCHPLETE FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL*0H/At1 020300 4-FF-H27 8 A VT-1 NDE 4.1-11 C C 3-19 87 CCHPLETE FLANGE FACE SURFACE ON HEAD 81.40 58'EVEl.*1H/AA0 020400 4.FF H28 8-A VT-1 NDE 4.1-11 C C 3-19 87 CCHPLETE FLANGE FACE SURFACE ON HEAD 8'l.40 58'EVEL%AH/A%0 020500 4-FF-H29 8 A VT-I HDE 4.1-11 C C 3-19 87 CNPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL*~H/A*~020600 4 FF-H30 8 A VT-I HDE 4.1-11 C C 3-19 87 COHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL*~H/A**
DATE: 07/07/89 REVI SIGH: 3 RP CO HAD TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIOD, SECOND INTERVAL CLASS 1 COHPOHEHTS PAGE: 11 ZONE HUHBER: 002 SUHHARY EXAIII NAY I OH AREA NQHIER IDEHT IF I CATION ASHE SEC.XI CATGY EXAH ITEN NO KEY HCO PROCEDURE N I 0 8 ONGT T RSEH A E I 0 E REHARKS T C G H R>>>>CALIBRATIOH BLOCK>>REF MG.0 004-020700 4 FF H31 B.A VT-I HDE 4.1-11 C C 3-19.8?COHPLETE FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL>>>>N/A*>>020800 4.FF.H32 8-A VT-1 HDE 4.1-11 C C 3-19.87 COHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL>>>>N/A**020900 4 FF-H33 B.A VT-1 HDE 4.1-11 C C 3-19 87 COHPLETE FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL>>>>H/A>>>>021000 4 FF.H34 BA VT1 HDE4111 C C 3.19.87 COHPLETE FLANGE FACE SURFACE ON HEAD 81.40 58'EVEL*>>H/A*>>021100 4.FF-H35 B.A VT-1 NDE 4.1-11 C C 3.19.87 CCHPLETE FLANGE FACE SURFACE OH HEAD 81.40 58'EVEL*>>H/A*>>021200 4 FF-H36 8-A VT-1 NDE 4.1-11 C C 3-19.87 COHPLETE FLANGE FACE SURFACE ON HEAD 81 40 58'EVEL*>>N/A**021300 4 FF H37 B.A VT.1 HDE 4.1-11 C C 3-19 87 COHPLETE FLANGE FACE SURFACE ON HEAD~81.40 58'EVEL>>>>N/A>>>>
DATE: 07/07/89 REVISION: 3 RPV CLO E MEAD TURKEY POIHX NUCLEAR PLAH1'NIT 4 INSERVI CE INSPECTION F INAL"REPORT TABLES (XJTAGE 2 (1987),.FIRST PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS H I 0 PAGE: 12 ZONE NUHBER: 002
SUMMARY
EXAHINATIOH AREA NUMBER IDENT IF ICATION ASHE SEC.XI CATGY EXAH ITEH NO HETNCO PROCEDURE S OMG'T T RSEH A E I 0 E REMARKS T C 0 H R i*CALIBRATIOM BLOCK 62-116-14 R F DUG MO.004-V 023900 4.CH.S 5 RPV STUDS 58'EVEL B.G-1 86.30 VT-1 NDE 4~1-1 VT-1 NDE 4.1-41 HT NDE 2.2.6 UT'60 DEG NDE 5.7-6 C C 87-PERFORMED AS FOUND ANO PRIOR TO PRE C CLEAN VISUALS, NCR KCI 87 04 (87 0100), C 100K UT ANO HT PERFORNEO AFTER REMOVALS C*UT-11~*62-16-16 R F.DlJG.NO.004-V2 024000 4.CH.S.6 RPV STUDS 58'EVEL 8 0 1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1 41 HT NDE 2.2-6 UT 60 DEG MDE 5.7 6 C C 87-AS FOUND ANO PRIOR TO PRE CLEAN C VISUALS PERFORMED, 100X UT AND HT C PERFORHED AFTER REMOVAL.C i UT-11'*62.116-17 REF.DUG.NO.004.V 024100 4.CH-S 7 RPV STUDS 58'EVEL B 0-1 86.30 VT-1 NDE 4.1-1 Vr-1 NDE 4.1-41 WT HDE 2.2 6 UT 60 OEG MDE 5.7-6 C C C C C 87-AS FOUND AND PRIOR TO CL VISUAL PERFORMED.
100K HT AND U PERFORMED AFTER REHOVAL*UT 11**62-116.19 REF.DUG MO.004.024200 4.CH-S.8 RPV STUDS 58'EVEL 8 0-1 86.30 VT-1 HDE 4.1-1 VT-1 NDE 4.1.41 HT NOE 2.2 6 UT 60 OEG MDE 5.7.6 C C C C C 87 AS FOUND AND PRIOR TO CLEANING VISUAL PERFORMED, 100K UT AND HT PERFORHEO AFTER REMOVAL.*UT-11**6 16-3 SCRAPPED S-2 REF DUG NO 004-V 024300 4-CH S 9 RPV STUDS 58'EVEL B.G.1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-36 HT NDE 2.2-13 UT 60 DEG HDE 5.7-9 C C 87.AS FOUND VISUAL PERFORHED, VISUAL C PRIOR TO CLEAN (LIGHT SURFACE RU7ST), 100X UT ANO HT PERFORMED AFTER REHOVAL.*UT-11**
t DATE: 07/07/89 REVISION: 3 RPV CLOSURE HEAD.TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERI(e, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 13 I ZONE HUMBER: 002
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC XI CATGY EXAH ITEM NO METHIXI PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK 62 116-25 REF DVG.NO.004-V2 024400 4-CH-S-10 RPV STUDS 58'EVEL B.G-1 VT-1 NDE 4.1-1 B6.30 VT-1 NDE 4.1-36 MT NDE 2.2-9 UT 60 DEG NDE 5.7.9'C 87-VISUAL EXAHS IN THE AS FOND AND C PRIOR TO GLEANING (LIGHT SURFACE RUST).100K UT 8 MT AFTER REMOVAL 62-116 26 REF.DNG.NO.004-V2 024500 4-CH-S-11 RPV STUDS 58'EVEL 0 B-G-1 86.30 VT-1 HDE 4.1.1 VT-'1 NDE 4.1-36 MT HDE 2.2-9 UT 60 DEG NDE 5.7.9 C C 87-AS FOUND AHD PRIOR TO CLEANIHG C VISUAL PERFORHED (LIGHT SURFACE RUST).10(C UT AND MT PERFORHED AFTER REHOVAL*UT-11~*62-116.28 REF.DNG.NO.004.V2 024600 4-CH.S-12 RPV STUDS 58'EVEL 8-G-1 B6.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-42 MT NDE 2.2-13 UT 60 DEG HDE 5.7-9 C C 87-AS FOUND AHD PRIOR TO GLEANING C VISUAL PERFORMED (LIGHT OXIDATION).
100'T AND MT PERFORMED AFTER REMOVAL.*~-11+*62-116-29 REF.DUG.NO.004-V2 024700 4.CH-S-13 RPV STUDS 58'EVEL 8-G-1 B6.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-42 MT NDE 2.2-13 UT 60 DEG HDE 5.7-9 C C C C C 87-AS FOUND AHD PRIOR TO CLEAHING VISUALS PERFORHED (LIGHT OXIDATIOH).
100K UT AND MT PERFORMED AFTER REMOVAL.*UT-11~*'I 62-116-31 REF.DWG.NO.004-V2 024800 4-CH-S-14 RPV STUDS 58'EVEL 8 G-1 86.30 VT-1 HDE 4.1-1 VT-1 HDE 4.1-36 MT NDE 2.2-13 UT 60 DEG HDE 5.7-9 C C 87-AS FOUND AND PRIOR TO CLEANING C VISUALS PERFORHED (LIGHT SURFACE RUST).100K UT AND MT PERFORHED AFTER REMOVAL.**UT-1'I~~
DATE: 07/07/89 REVISION: 3 RPV CLOSURE HEAD TURKEY POINT NUCLEAR PLANT UNI'T 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS H I 0 20NE NUHBER: 002
SUMMARY
EXAMIHATION AREA HUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G H R"<<CALIBRATION BLOCK<<62 116-32 REF.DWG.NO.004-V2 024900 4-CH-S-15 RPV STUDS 58'EVEL B-G.1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1.36 MT NDE 2.2-13 UT 60 DEG NDE 5.7-9 C C 87-AS FOUND AND PRIOR TO CLEANING C VISUALS PERFORHED (LIGHT SURFACE RUST).100K UT AND HT PERFORMED AFTER REMOVAL<<UT-1'I*>>62-116-34 REF.DNG.NO.004-V2 025000 4 CH-S-16 RPV STUDS 58'EVEL 8 G-1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-36 HT NDE 2.2-13 UT 60 DEG MDE 5.7-9 C C 87-AS FOUND AND PRIOR TO CLEANING C VISUAL PERFORMED (LIGHT SURFACE RUST)~100K UT AND MT PERFORMED AFTER REMOVALS*<<UT 1 1**62-116-38 REF.DUG.NO.004-V2 02510D 4.CH-S-17 RPV STUDS 58'EVEL 8 G-1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-36 HT NDE 2.2-13 UT 60 DEG NDE 5.7-9 C C 87-AS FOUND AND PRIOR TO CLEANING C VISUAL PERFORMED (LIGHT SURFACE RUST).100K UT AND MT PERFORMED AFTER REMOVAL.<<*UT-11*>>62-116.43 REF.DMG.MO.004-V2 0252DD 4.CH-S-18 RPV STUDS 58'EVEL B.G.1 86.30 VT.1 NDE 4.1-1 VT-1 NDE 4.1-29 HT NDE 2.2.11 UT 60 DEG NDE 5.7-10 C C C C C 87-AS FOUND AND PRIOR TO CLEANING VISUALS PERFORMED.
100K UT AND MT PERFORMED AFTER REMOVAL.*UT-11*>>62-116-44 REF.DIIG.MO.004.V2 025300 4-CH-S-19 RPV STUDS 58'EVEL 8-0-1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-32 MT~NDE 2.2-12 UT.60 DEG NDE 5.7-11 C C 87-AS FOUND AND PRIOR TO CLEANING C VISUALS PERFORMED (BORIC ACID RESIDUE).100K UT AND MT PERFORMED AFTER REHOVAL.*<<UT 1 1*>>
DATE: 07/07/89 REVISION: 3 RPV C OSURE H TURKET POINT NUCLEAR PLAHI'MI't 4 IMSERVICE IHSPECTIOI FINAL REPORt TABLES OUTAGE 2 (1987), FIRST PERI(O, SECOND IH'IERVAL CLASS 1 CONPDHEHTS PAGE: 15 ZONE NUMBER: 002 SIKOIART EXAH I HAT ION AREA NIKIBER IDENT IF I CAT ION ASHE SEC.XI CATGY EXAN ITEN NO HETHCO PROCEDURE N I 0 S OHGT T RSEH A E I'0 E RENARKS C 0 H R~iCALIBRATI(XI BLOCK-11.46 R F.UG NO OOC-025CDD 4 CH S-20 RPV STUDS 58'EVEL B-G-1 86.30 VT-1 NDE 4.1-1 Vt-1 NDE 4.1-32 Ht NDE 2.2-12 UT 60 OEG NDE 5.7-11 C C 87-AS FIXlND AMO PRE CLEANING VISUALS C PERFORHED (BORIC ACID RESIDUE).C 100K Ut AND Ht PERFORMED AFTER REHOVAL.C*UT-11**-116 49 R.KG NO OOC-V 025500 4 CH.S 21 RPV STUDS 58'EVEL 8 G-1 B6.30 VT-1 NDE 4.1-1 VT-1-NDE C.1-32 HT NDE 2.2-12 Ut 60 DEG NDE 5.7 11 C C C C C 87-AS FOUHD AMD PRIOR TO CLEANING VISUALS PERFDRNED (BORIC ACID RESIDUE)IOOX Ut AKO Ht PERFORHED AFTER REHOVAL.*Ut-11*~6-116-50 R F.D NO OOC-025600 4 CH S 22 RPV STUDS 58'EVEL B.G.1 86.30 VT-1 MDE 4.1-1 VT-1 MDE 4.1-32 Ht NDE 2.2-12 UT 60 OEG NDE 5.7-2 UT 60 DEG NDE 5.7 4 UT 60 DEG HDE 5.7-11 C C C C 3-21-87 ONE CRACK LIKE INO.IH BACK OF STUD 9 BOTTOH OF HUT.RUNS APPROX 45 DEG CIRC.IH PLACE EXAM.4-2-87 SCAHNED UPPER C THREADED AREA OHLT~INDICATIOI DETERMINED TO BE CAUSED BT THE SORIC ACID.~Ut-11'~025601 4.CH S.22R RPV STUDS 58'EVEL B-G 1 86.30 VT-1 HDE 4.1-48 C C 87-BASELINE HT NDE 2.2-14 C UT 60 HDE 5.7-12 C*Ut-11**6-116.61 REF.DIIG KO 004-025700 4 CH.S 23 RPV STUDS 58'EVEL 8G1 86.30 VT-1 KDE 4~1 1 HT NDE 2.2-12 Ut 60 DEG KDE 5.7-1 Ut 60 DEG NDE 5.7-4 VT-1 NDE 4.1-32 UT 60 DEG HDE 5.7 2 UT 60 DEG HDE 5.7-11 HT MDE 2.2.1 VT-1 HDE 4.1 12 C C C C C C C C C C 3-20.87 100K DAC IHD.8 BOTTOI OF NUT.IN PUCE EXAH.3-21-87 REEXAH UPPER HALF ONL'Y, CRACK LIKE 360 DEG~LOCA'tED BOTTOH OF NUt 8 At JOINT BETNEEN KASHERS 8 FLANGE'-2-87 SCANHED UPPER THREADED AREA OHLY.DETERMINED TO BE CAUSED BY THE BORIC ACID.*UT-'l1**
DATE: 07/07/89 REV I SION t 3 RPV C OSUR MEAD TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIm, SECOND INTERVAL CLASS 1 COHPONEHTS PAGE: 16 ZONE NUMBERS 002 SQWARY EXAMINATION AREA NUMBER 10ENTIF ICATIOH ASHE SEC.XI CATGY EXAH ITEN MO METHOD PROCEDURE H I 0 8 ONGT T RSEH A E I 0 E REHARKS T C G H R*~CALIBRATIOH BLOCK~6-16-0 R F.QG.NO.004-025701 4 CH S 23R RPV STISS 58'EVEL 8 G.1 VT-I 86.30 HT UT 60 NDE 4.1 48 NDE 2.2-14 HDE 5.7-12 C C C C 87-BASELINE 6-~R F IS NO 004.V 025800 4.CH-S-24 RPV STISS 58'EVEL B 0-1 86.30 VT-I VT-1 UT 60 OEG UT 60 OEG VT 1 HT NDE 4.1-1 NDE 4.1 22 MDE 5.7-1 NDE 5.7-5 NDE 4.1-12 HDE 2.2-3 C 3-19-87-360 DEG.NASTAGE ABOVE THE NUT C OH THE THREADS(IH PLACE)~4 4 87 REHOVED C SANE AS IH PLACE.3-20-87 IN PLACE OH C HEAD NASTAGE 1/3 OF AREA COVERED BY NUT, 180 DEG.4 4-87 100K OF STIR)HASTAGE.SENT TO THE NRC IH BROOKMAVEN.
UT-11'-16.0 F DQG MO.004.025801 4-CH S 24R RPV STUDS 58'EVEL 8G1 VT-1 86'0 HT UT 60 HDE 4.1-48 NDE 2.2-14 NDE 5.7-12 C C 87-BASELINE C C*UT-11 62.116-63 REF.DUG NO.004-V2 025900 4.CH.S 25 RPV STISS 58'EVEL 8 G-1 86.30 VT-1 UT 60 DEG UT 60 DEG VT-1 VT 1 UT 60 DEG HT NDE 4.1-1 NDE 5.7-1 NDE 5.7-2 MDE 4.1-12 NDE 4.1-20 NDE 5.7-5 NDE 2.2.1 C 3-19 87 AS FIXIND IN PLACE,IIASTAGE THREADS ABOVE HUT.4.4.87 REHOVED, SAME C AS AS FOUND.3.20.87 IN PLACE ON HEAD.3-21-87 REEXAH, INO BOTTOM OF NUT.C 4 4.87 REMOVED FROH HEAD.a UT-11*+6 116 50 REF.DUG MO.004-V2 025901 4 CH*S-25R RPV STUDS 58'EVEL 8-0-1 VT-1 86.30 HT UT 60 MDE 4.1-48 C C MDE 2.2-14 C NDE 5.7-12 C 87 BASELIHE~UT-I'f*~
DATE: 07/07/89 REV IS I OH: 3 RPV OSUR H AO TURKET'PO!HT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIOH FINAL"REPORT TABLES OUTAGE 2 (1987), FIRST PERIM, SECOND INTERVAL CLASS 1 COHPOHEHTS PAGE: 17 I ZONE MUHBER: 002 SIWHARY EXAIIIMATIOH AREA NUMBER IDENTIF ICATIOH ASHE SEC.XI CATGY EXAH ITEN NO METHOD S 0 T R A E PROCEDURE T C I 0 NOT SEH I OE GHR REIIARKS~~CALIBRATIOM BLOCK*6 16 REF DllG.NO.004-026000 4 CH-S-26 RPV STUDS 58'EVEL 8 0-1 86.30 VT-1 NDE 4.1-1 VT-1 NDE 4.1-21 UT 60 DEG NDE 5.7 1 UT 60 OEG MOE 5.7-5 C 3-19 87, 360 OEG.THREAD MASTAGE ABOVE C NUT.4.4.87 SAHE AS ASFDUMD REHOVED.C 3-20.87 IH I LACE OH MEA04-4-87 REMOVED FROI HEAD.*aUT 11**6 116 50 R F ONG NO 004-V2 026001 4-CH.S.26R RPV STUDS 58'EVEL B.G-1 VT-1 B6.30 HT UT 60 MDE 4.1 48 C C NDE 2.2-14 C NDE 5.7-12 C 87-BASELINE~UT-11m 6 116.68 R.DIIG NO.004.V2 026100 4-CH S 27 RPV STUDS 58'EVEL BG1 86.30 VT 1 UT 60 DEG UT 60 DEG HT VT-1 UT 60 OEG UT 60 DEG NDE 4.1 1 NOE 5.7-1 NDE 5.7-4 HDE 2.2-10 HDE 4.1.27 MDE 5.7-2 NDE 5.7-8 C C 3-19.87 AS FOJMO IN PLACE.3-20.87 CRACK C LIKE IH BACK OF STUD QTHE BOTTDH el NUT C RUNNING 45 DEG.CIR 4 2.87 SCANNED UPPER C HALF THREADED AREA OHLT.REHOVED AMD C EXAHINED 100K HT 8 UT.C*UT 11~~6.116-50 R OMG MO.004-V2 026101 4-CH S-27R RPV STUDS 58'EVEL 801 VT-1 86.30 H'I UT 60 MDE 4.1.48 C C 87-BASELINE NDE 2.2-14 C NDE 5.7-12 C~UT.11e~6-16-70 R F DIJG NO.004-V 026200 4.CH-S-28 RPV STUDS 58'EVEL 8G1 86.30 VT-1 UT 60 DEG UT 60 OEG VT 1 HT UT 60 DEG MDE 4.1-1 MDE 5.7-2 MDE 5.7 4 NDE 4.1-27 NDE 2.2-7 NDE 5.7 7 C C 3-19.87 IHPLACE.3-2'I 87 CRACK LIKE INO C IN BACK OF THE STIS Q BOTTDH OF THE NUT.RUNS APPROXIHATELT 45 DEGREES C CIRCUHFEREHTIALLT IH PLACE.4-2-87 STUD REHOVED.100K HT AMO UT.~UT-11~~
DATE: 07/07/89 REVISION: 3 RPV CLOSU'RE MEAD TURKET POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIXI, SECOND INTERVAL CLASS 1 CDNPONENTS PAGE: 18 ZONE MQIBER: 002 SUHNART EXAMINATION AREA NQIBER IDENT I F I CAI'ION ASNE SEC.XI CATGT EXAH ITEN NO HETHDO PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G H R*<<CALIBRATIOM BLOCK 2 16 0 R OVG 0 004 V2 026201 4.CH.S-28R RPV STISS-58'EVEL 8 0-1 86.30 VT-1 NDE 4.1-48 C C 87-BASELINE HT NDE 2.2-14 C UT 60 MDE 5.7-12 C<<UT-II<<<<6.116-71 R F llG MO 004-026300 4-CH-S-29 RPV STUDS 58'EVEL B.G-1 B6.30 VT-1 NDE 4.1.1 VT-1 NOE 4~1-27 HT NDE 2.2-7 UT 60 DEG NDE 5.7 7 C X 3 19.87 VT IN PLACE UNDER TENSION, VT X PRIOR TO CLEANING, 100X NT AND UT X REMOVED~X*UT-II 6 16-R F.DllG NO 004.V 026400 4-CH.S.30 RPV STUDS 58'EVEL 8 0 1 86.30 VT-1 HDE 4.1 1 VT-1 NDE 4.1-27 NT NDE 2.2.7 UT 60 DEG MDE 5.7-7.C C 3-19.87 VT IH PLACE UNDER TEHSI C PRIOR TO CLEANING, 100X IIT AND C REHOVEO.<<UT-11*<<116 74 REF DVG.NO 004-026500 4.CH.S.31 RPV STUDS 58'EVEL 8 0-1 86.30 VT-1 NDE 4.1-1 VT-1 HOE 4.1-27 H'I NDE 2.2-7 UT 60 OEG HOE 5.7.8 C C 3-19.87 VT IN PLACE UNDER TENSION, VT C PRIOR TO CLEANING, 100X HT AND UT C REHOVEO~C<<UT-11<<<<6 116-76 REF DUG.NO.004.V2 026600 4 CH-S-32 RPV STUDS 58'EVEL 801 86.30 VT-1 NDE 4.1-1 V'I-1 NOE 4.1.27 HT NDE 2.2-7 UT 60 DEG NDE 5.7 8 C C 3-19 87 VT IN PLACE UNDER~TENSION.C REMOVED VT PRIOR TO CLEANING AMO 100K C UI'/HT.C*UT-11**
DATE: 07/07/89 REVISION: 3 RPV CLOSURE MEAD TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987)<FIRST PERIIXI<SECOND INTERVAL CLASS 1 QHIPOHENTS PAGE: 19 ZONE HUNGER: 002
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CAT GY EXAH ITEM NO HETNOO PROCEDURE N I 0 S OMGT RSEH A E I 0 E REMARKS T C 0 H R>><<CALIBRATION BLOCK<<NO 004 026700 4-CH-S-33 RPV STISS 58'EVEL 8 G-1 86.30 Vr-1 XDE 4.1-1 VT 1 NDE 4.1 27 NT HDE 2.2-7 UT 60 DEG NDE 5.7-8 C C 3-19.87 VT IH PLACE UHDER TENSION~C REMOVED VT PRIOR TO CLEANING AND 100X C UT/MT'<<UT-11<<>>6-116 8 RE O'N NO 004.026800 4-CH S-34 RPV STUDS 58'EVEL 801 86.30 VT-1 HDE 4.1-1 VT 1 HDE 4.1-27 HT HDE 2.2-7 UT 60 DEG HDE 5.7-8 C C 3.19.87 VT IH PLACE UNDER TENSION.C REMOVED VT PRIOR TO CLEANING AND 100K C UT/HT.C<<"UT.11<<<<6-116 83 REF DUG MO 004 V2 026900 4 CH S-35 RPV STUDS 58'EVEL 8 G-1 86.30 VT 1 NDE 4.1-1 VT.1 NDE 4.1-27 HT HDE 2.2-7 UT 60 DEG NDE 5.7-7 C C 3-19.87 VT IH PLACE UHDER TEHSIOH.C REMOVED VT PRIOR TO CLEANING AMO ID'UT/HT.C>>UT-11*>>62 116 84 REF DUG.NO.004-V2 027000 4.CH S 36 RPV STUDS 58'EVEL 8.0-1 86.30 VT-1 NDE 4.1-1 VT 1 HDE 4.1.34 HT NDE 2.2-11 UT'60 DEG NDE 5.7-10 C C 3-19.87 VT IH PLACE UNDER TENSION.C REMOVED VT PRIOR TO CLEAHIHG AHO 100K C UT/HT.C*<<UT-11<<>>62-116 85 REF.DllG.NO.004 V2 027100 4 CH.S-37 RPV STUDS 58'EVEL 8 G-1 86.30 VT-1 VT-1 Hl'T HDE 4<1-1 NDE 4.1-34 HDE 2.2-11 NDE 5.7-10 C C 3-19 87 VT IH PLACE UNDER TENSION.C REMOVED VT PRIOR TO CLEANING AND 100K C UT/HT.C<<UT-11<<>>
OATEs 07/07/89 REV I SIN s 3 RPV C OSUR H AD TURKEY POiNT NUCLEAR PLANT UNIT 4 IMSERVICE IHSPECTIOI FINAY REPORT TABLES OUTAGE 2 (1987), FIRSt PERIIXS, SECOND INTERVAL CLASS 1 COMPONENTS PAGEs 1NE MIKIBERs 002
SUMMARY
EXAHIKA'tlON AREA NNSER IDEHT IF ICATION ASHE SEC.XI CATGY EXAH ITEN KO HETHOD PROCEDURE M I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R~*CALISRATIN BLOCK REF D HO 004-029700 4-CH-N-5 RPV NUTS 58'EVEL BG1 86.10 VT-1 NDE 4.1-2 VT-1 HDE 4.1-41 Ht HDE 2.2-6 Ut 45 DEG KDE 5.10-2 C C C C C 87-Vt IN PLACE AND PRIOR TO CLEANII REMOVED HT AMO UT.e Ut-25~*029800 4.CH.N.6 RPV KUTS 58'EVEL 8.0-1 S6.10 VT-1 MDE 4.1 2 VT.1 HDE 4.1.41 HT NDE 2.2 6 Ut 45 DEG MDE 5.10.3 C C C C C 029900 4-CH-M.7 RPV NUTS 58'EVEL 8 G-1 86.10 VT 1 NDE 4.1 2 VT-1 NDE 4~1 41 HT NDE 2.2-6 UT 45 DEG NDE 5.10-3 C C C C C 0 030000 4.CH.N.S RPV KUTS 58'EVEL 8-G-1 86.10 VT-1 NDE 4.1-2 VT-1 HDE 4.1-41 HT HDE 2.2 6 Ut 45 DEG HOE 5.10-3 C C C C C~Ut 25~~030100 4.CK.N.9 RPV KUTS 58'EVEL 8 0-1 86.10 VT-1 NDE 4.1-2 VT-1 NDE 4.1-37 HT NDE 2.2 9 UT 45 DEG HDE 5.10 6 C C C C C*UT-25**030200 4.CH.N-10 RPV NUTS 58'EVEL 8-G-1 86.10 VT-1 HDE 4.1-2 VT 1 HDE 4.1-37 HT'DE 2.2.9 UT 45 DEG NDE 5.10.6 C C~UT-25~~
DATE!07/07/89 REVISION: 3 RPV C OSUR M AD TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL" REPORT TABLES CJTAGE 2 (1987), FIRST PERIIO, SECOND INTERVAL CLASS 1 CCHPONENTS PAGE: 21 ZONE NUMBER: 002 SINHARY EXAHINA'TIDH AREA MNIBER IDENTIFICATION ASHE SEC.XI CAT GT EXAM I TEH MO HETHDO N I 8 ONG T RSE A E I 0 PROCEDURE T C G H E REHARKS R*<<CALIBRATIOM BLOCK 1 REF UG.MO 004-V2 030300 4.CH H-11 RPV NUTS 58'EVEL 801 86.10 VT-1 NDE 4.1.2 VT-1 NDE 4~1 37 HT HOE 2.2.9 UT 45 DEG NDE 5.10.6 C C 11UT 25<<<<030400 4 CN H-12 RPV NUTS 58'EVEL 8-G-1 86.10 VT-1 NDE 4.1-2 VT-1 NDE 4.1.42 HT NDE 2.2.9 UT 45 DEG NDE 5.10.6 C C 1 UT 2511 030500 4.CH.N-13 RPV NUTS 58'EVEL 8G1 86.10 VT-1 NDE 4.1-2 VT 1 NDE 4.1 42 HT NDE 2.2.9 UT 45 DEG NDE 5.10.6 C C 1<<UT-251*030600 4.CH.M.14 RPV HUTS SS'EVEL BG1 86.10 VT-1 NDE 4.1-2 VT.1 NDE 4.1-37 HT NDE 2.2 9 UT 45 OEG NDE 5.10 6 C C 1 UT-25*1 030700 4 Ck N 15 RPV NUTS 58'EVEL BG1 86.10 VT-1 NDE 4.1-2 VT-1 NDE 4.1 37 HT NDE 2.2-9 UT 45 DEG HDE 5.10 6 C C C C C<<UT-25<<<<030800 C.CH H-16 RPV NUTS 5S'EVEL B.G.1 86.10 VT-1 NDE 4.1-2 VT-1 NDE C.1-37 HT MOE 2.2.9 UT 45 DEG MDE 5.10 6 C C C C C*UT-251*
DATE: 07/07/89 REVISION: 3 RPV C OSUR N AD TURKEY POIHT NUCLEAR PLANT UMIT 4 IMSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERICO, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 22 ZONE HQIBERT 002 SINNIARY EXAMINATION AREA NINIBER IDENTIFICATION ASHE SEC.XI CATGT EXAH ITEN NO HETHOO PROCEDURE H I 0 8 OHGT T RSEH A E I 0 E REMARKS T C 0 H R>>>>CALIBRATIOM BLOCK*NO 004.V2 030900 4 CH N-17 RPV NUTS 58'EVEL 8 G-1 86.10 VT-1 HDE 4.1-2 VT-1 NDE 4~1-37 HT NDE 2.2.9 UT 45 DEG NDE 5.10.6 C C C C C*UT-25>>>>031000 4-CH-N-18 RPV NUTS 58'EVEL 8 0-1 86.10 VT-1 HDE 4.1-2 VT-1 NDE 4.1-29 H'I NDE 2.2.11 UT 45 DEG HDE 5.10 3 C C C C C>>>>UT 25>>>>031100 4 CN.N.19 RPV NUTS 58'EVEL 8G1 86.10 VT-1 NDE 4.1-2 VT-1 NDE 4 1 40 HT NDE 2.2'12 UT 45 DEG HDE 5.10 4 C C C C C>>UT-25**031200 4.CH.N-20 RPV NUTS 58'EVEL B.G-1 86.10 VT-1 HDE 4.1-2 VT-1 NDE 4~1.40 HT HDE 2.2-12 UT 45 DEG NDE 5~10.4 C C C C C*UT-25>>*031300 4.CH.N 21 RPV NUTS 58'EVEL 8-G 1 86.10 V'I-1 NDE 4.1-2 VT-1 NDE 4 1 40 HT HDE 2.2-12 UT 45 DEG NDE 5.10.4 C C C C C*>>H/A*>>031400 4.CH.N.22 RPV NUTS 58'EVEL BG1 86.10 VT-1 HDE 4.1 2 VT-T NDE 4.1 40 HT NDE 2.2-12 UT 45 DEG MDE 5.10-4 C C C C C>>>>H/A>>>>
DATE: 07/07/89 REVI SION s 3 RP R H AD TURKEY POINT HUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERI(e, SECOND IHTERVAL CLASS 1 CQtPOHEHTS PAGEs 23 ZONE NUMBERs 002 SSMBIARY EXAMINATION AREA NUMBER I DENT IF ICATION ASHE SEC XI CATGT EXAM I TEH NO NETH(X)PROCEDURE N I 0 8 OHGT T RSEH A E I 0 E REMARKS T C 0 H R~~CALIBRATION BLOCK~R N 04 031401 4 CH H-22R RPV NUTS 58'EVEL B.G-1 VT-1 86.10 HT UT 45 MDE 4.1-46 C C 87-REPLACEHENT NUT HDE 2.2-14 C MDE 5.10-7 C~UT-25'*031500 4.CH.N.23 RPV HUTS 58'EVEL 8 G-1 86.10 VT 1 Vl'Hl'T 45 DEG HT VT-1 NDE 4.1-2 NDE 4.1 40 NDE 2.2 12 HDE 5.10.4 NDE 2.2 1 HDE 4.1-12 C C 3-19.87 (2)CASTLES ARE ERCOED AT APPROX C 210 DEGREES.C C C 1tN/A14 C 031501 4.CH-N-23R RPV NUTS 58'EVEL 8 0 1 VT-1 86.10 Hr UT 45 NDE 4.1-46 NDE 2.2.14 HDE 5~10.7 C 0 87 BABEL IHE C C~UT-25~4 031600 4 CH H-24 RPV NUTS 58'EVEL BG1 86.10 VT.1 VT.1 HT VT-1 HDE 4.1 2 HDE 4.1-12 HDE 2.2-3 HOE 4.1-22 C C C C 3-19 87 APPROX.360 DEGREES DEGRADATIOH OF HUT, APPROX 180 DEGREES OF THE NUT FROM 160 TO 250 DEGREES AROUND IS ERODED C AWAY.4 4-87 AFTER OETEHSIONIHG SANE AS AS FOUND.eaH/Ai*031601 4 CH N 24R RPV NUTS 58'EVEL 8 G-1 86.10 VT-1 NDE 4.1.46 C C 87-BASELINE HT HDE 2.2-14 C UT 45 NDE 5.10 7 C~tgT 254P 031700 4 CH.N 25 RPV NUTS 58'EVEL 8 G-1 86.10 VT-1 VT-1 HT VT-1 NOE 4.1-2 NDE 4.1-20 NDE 2.2-2 HDE 4+1-12 C 3 19-87 AS FOUND, ENTIRE TOP OF MUT IS C DEGRADED.2 CASTLE HEADS ARE ERCOED AWAY.4 4-87 AFTER OETEHSIONINGI NO C CHAHGE FROM AS F(XJMO.**H/A*~
DATE: 07/07/89 REV I SION: 3 RPV SUR H TURKET POINT NUCLEAR PLAHl'NIT 4 IHSERVICE IHSPECTIOH.FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIX), SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 24 ZONE NUMBER: 002 SINIIARY EXAHINATIOH AREA NQIBER IDENT IF I CAT I OH ASHE SEC.XI CATGT EXAH I TEII MO METHOD PROCEDURE N I 0 8 ONGT T RSEH A E I 0 E REHARKS T C G H R*+CALIBRATION BLOCK e REF.DlJG MO.004-031701 4 CH N-25R RPV HUTS 58'EVEL 8 G-1 86.10 VT-1 HDE 4.1-46 C C 87-BASELINE HT HDE 2.2-14 C UT 45 HDE 5.10-7 C*UT-25~~031800 4 CN H-26 RPV NUTS 58'EVEL 8 0-1 86.10 VT-1 VT 1 NDE 4.1-2 NDE 4.1-21 C 3-19.87 AS FOUND OVERALL SURFACE OF NUT C DEGRADED TOP AND BOTTOH, CASTLES ARE ERODED AUAY.4.4.87 AFTER DETENSIONING SANE AS AS FOUND.k*H/A1 0 031801 4-CH.M.26R RPV NUTS 58'EVEL BG1 VT1 86.10 HT UT 45 NDE 4.1-46 HOE 2.2-14 HDE 5.10.7 C C 87 BASELINE C C 031900 4.CH.N.27 RPV NUTS 58'EVEL 8.0-1 86.10 VT-1 MDE 4.1-2 VT-1 NDE 4.1.30 UT 45 DEG HDE 5.10.3 WT NDE 2.2-11 C C 3-19-87 AS FOUND ALHOST TOTAL C OEGRADATIOH OF NUT CASTLES FROM 190 TO C 290 DEGREES.C*aN/A*I 031901 4.CH.N.27R RPV HUTS 58'EVEL B.G-1 86.10 VT 1 MDE 4.1-46 C C 87-BASELINE HT NDE 2.2-14 C UT 45 NDE 5.10-7 C 032000 4 CH.N 28 RPV NUTS 58'EVEL B 0-1 86.10 VT 1 NDE 4.1-2 H'I NDE 2.2.7 Vl'MDE 4.1-30 UT 45 OEG MDE 5~10.5 C C 3.19 87 AS FOUND IN PLACE, DEGRADATIOH C OF CASTLE HEADS FROH 190 TO 280 DEGREES.C C*~H/A~*
DATE: 07/07/89 REVISION: 3 RPV C OSUR HE TURKEY POINT NUCLEAR PLAHt UNlt 4 IHSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRSt PERIIX), SECOND INTERVAL CLASS 1 CDHPONENTS PAGE: 25 ZONE NUMBER: 002 SUHHART EXAHINATIOH AREA NUMBER I DENT IF I CAT I OH ASHE SEC.XI CATGT EXAM ITEN NO HETHOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R~~CALIBRATION BLOCK~R F DUG NO 004-032001 4-CH.N 28R RPV HUTS 58'EVEL 8 0 1 VT-1 HDE 4.1.46 C C 87-BASELIHE 86.10 HT NDE 2.2-14 C Ut 45 HDE 5.10 7 C tfgt 25*4 032'100 4-CH.M.29 RPV HUTS 58'EVEL 8 G-l 86.10 VT-1 MDE 4.1-3 VT-1 HDE 4.1-30 HT NDE 2.2.7 UT 45 DEG NDE 5.10 5 C C 87 SURFASE PITTING C C C~~N/A*~032200 4-CH.N 3D RPV NUTS 58'EVEL B.G 1 86.10 VT-1 MDE 4.1-3 VT-1 MDE 4.1-30 HT HDE 2.2.7 UT 45 DEG NDE 5'0 5 C C C C C 10N/Ala 032300 4.CM.N-31 RPV HUTS 58'EVEL 8-0-1 86.10 VT-1 NDE 4~1-3 VT-1 NDE 4.1 30 HT HDE 2.2-7 Ut 45 DEG NDE 5.10 5 C C C C C~*H/A~*032400 4.CH.N 32 RPV NUTS 58'EVEL 8 0-1 86.10 VT-I HDE 4.1.3 VT-1 HDE 4.1-30 Ht HDE 2.2-7 UT 45 DEG NDE 5.10 5 C C C C C%OH/A%4 032500 4.CH-M 33 RPV HUTS 58'EVEL B-G-'I 86.10 VT.1 NDE 4.1-3 VT-I NDE 4.1-30 HT NDE 2.2-7 UT 45 DEG NDE 5.10 5 C C C C C%OH/A%0 DATE: 07/07/89 REVI SIGH: 3 TURKEY POINT NUCLEAR PLAHT UNIT 4 IHSERVICE INSPECTION FINAL 4EPORT TABLES OUTAGE 2 (1987), FIRST PERIM, SECOND INTERVAL CLASS 1 UKIPOHEHTS PAGET 26 ZOKE HUNGER: 002 SUHMARY EXAHINAT I OH AREA NINBER IDENT IF ICATION ASHE SEC.XI CATGT EXAH ITEH KO IIETKOO PROCEDURE N I 0 8 OHGT T RS EH A E I 0 E REHARKS T C G H R<<<<CALIBRATIOH BLOCK<<<<R F.DNG NO 004 032600 4.CH.N 34 RPV NUTS 58'EVEL BG1 86.10 VT-1 KDE 4.1-3 VT-1 NOE F 1-30 HI'DE 2.2-7 UT 45 OEG NDE 5.10.5 C C C C C*<<N/A<<<<032700 4.CH N 35 RPV NUTS 58'EVEL 8.0-1 86.10 VT-1 NDE 4.1-3 VT-1 KDE 4.1-30 HT NDE 2.2 7 UT 45 OEG NDE 5.10 5 C C C C C<<<<H/A<<<<032800 C.CH.N-36 RPV NUTS 58'EVEL 8 0-1 86.10 VT-1 KDE C.1-3 VT 1.NDE 4.1-34 HT NDE 2.2-11 UT 45 DEG KDE 5.10.3 C C C C C<<<<H/A<<<<032900 4-CH H-37 RPV KU'TS 58'EVEL 8.0-1 86.10 VT-1 HDE 4.1-3 HT HDE 2.2.11 VT-I NDE C.1-34 UT 45 OEG NDE 5.10.3 C C 87-COHPLETE C C C*<<N/A**035400 4-CH.LII.S RPV LARGE MASKERS 58'EVEL 8-0-1 VT-1 86.50 VT-1 NDE 4.1-4 C C HDE 4.1 35 C<<<<K/A<<<<035500 4 CH LU.6 RPV LARGE MASKERS 58'EVEL B.G-1 VT-1 86.50 VT-1 NDE 4.1-4 C C KDE 4.1-35 C**H/A<<*
DATE: 07/07/89 REVISION: 3 RPV C E K AD TURXET POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIXI, SECOND IHTERVAL CLASS 1 COKPONENTS PAGE: 27 ZONE KISSER: 002 SUKHART EXAHINAT I ON AREA NUKBER IDENT IF I CAT I OH ASKE SEC.XI CATGT EXAH I TEH HO KETHOO H I 0 S ONGT T RSEH A E I 0 E REHARXS PROCEDURE T C 0 H R<<*CALIBRATIOK BLOK'K V 035600 4 CH LM-7 RPV LARGE MASHERS 58'EVEL BG1 VT-1 B6.50 VT.1 HDE 4.1-4 C C NDE 4.1.35 C<<>>H/A>>>>035700 4 CH LM 8 RPV LARGE MASKERS 58'EVEL B.G-1 VT.1 86.50 VT.1 KDE 4.1 4 C C NDE 4.1-35 C<<<<H/A>>>>035800 4.CH-LM 9 RPV LARGE MASKERS 58'EVEL 8.0.1 VT-1 B6.50 VT-1 NDE 4.1-4 C C NDE 4~1-38 C**N/A*>>035900 4 CH LM 10 RPV LARGE MASHERS 58'EVEL B-G.1 VT-1 86.50 VT-1 NOE 4.1 4 C C NDE 4.1-38 C*<<K/A>>>>036000 4.CH-LM.11 RPV LARGE MASKERS 58'EVEL 8.0-1 VT-1 86.50 VT-1 HDE 4.1.4 C C NDE 4.1 38 C*<<N/A>>>>036100 4.CH-L'M.12 RPV LARGE MASHERS 58'EVEL B0 1 VI-1 86.50 VT-1 KDE4.14 C C NDE 4.1 42 C<<>>H/A<<*036200 4 CH LM-13 RPV LARGE MASKERS 58'EVEL 8.0.1 VT-1 86.50 VT-1 NDE 4.1-4 C C NOE 4.1.42 C**H/A>>>>
DATE: 07/07/89 REVISION: 3 RPV C 0 N TURKET POIHT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTION FINAL-REPORT TABLES OUTAGE 2 (1987), FIRST PERIOD, SECOND IHTERVAL CLASS 1 COHPOHENTS PAGE: 28 ZONE NUHBER: 002 SWHARY EXAHI NATION AREA NUHBER I DENT IF ICATION ASHE S C.XI CAT GY EXAH I TEH NO HETHOO PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REHARKS T C G H R~~CALIBRATION BLOCK~R F OMG NO 004-036300 4-CH LM-14 RPV LARGE MASHERS 58'EVEL 8-0-1 VT-I 86.50 VT-1 NDE 4.1-4 C C NDE 4.1-38 C aeN/Ate 036400 4 CH LM-15 RPV LARGE MASHERS 58'EVEL B.G-1 VT-1 86.50 VT-1 NDE 4.1-4 C C HDE 4.1-38 C 4tH/A%0 036500 4.CH LM.16 RPV LARGE MASHERS 58'EVEL 8.0.1 VT-1 86.50 VI'-1 NDE 4.1.4 C C NDE 4.1-38 C*~N/A~~036600 4 CH LM 17 RPV LARGE MASHERS 58'EVEL B G-1 VT-1 86.50 VT-1 NDE 4.1 4 C C NDE 4.1-38 C*ON/Aa*036700 4.CH LM 18 RPV LARGE MASNERS 58'EVEL 8.0.1 VT-1 86.50 VT-I VI'-1 NDE 4.1 4 C C NDE 4.1.29 C NDE 4.1-33 C%AH/AOO 036800 4.CH LM 19 RPV LARGE MASHERS'58'EVEL 801 VT-1 86.50 VT 1 NDE41 4 C C NDE 4.1-33 C**N/A~~036900 4-CH-LM 20 RPV LARGE MASHERS 58'EVEL B.G-1 VT-1 86.50 VT-1 HDE 4.1-4 C C NDE 4.1.33 C~~H/A~*
DATE: 07/07/89 REVISION: 3 RPVC E K AD'TURKET POINI'UCLEAR PLAN'I UNIT 4 INSERVICE INSPECTION FIHAL REPORt TABLES OUtAGE 2 (1987), FIRST PERIM, SECOND INTERVAL CLASS 1 COHPOKENTS PAGE: 29 ZONE KUHBER: 002 SUHHARY EXAHINA'tION AREA HISSER IDENT IF I CAt I OH ASHE SEC.XI CATGY EXAH ITEll KO NETHOO PROCEDURE N I 0 S OHGT T RSEH A E I OE T CGHR REHARXS**CALIBRATIOK BLOCX~R KO.004-037000 4-CH-LII-21 RPV LARGE NASHERS 58'EVEL B G-1 VT-1 86.50 Vl'-1 NDE 4.1-4 C C NDE 4.1-33 C~~H/A~*037100 4 CH-LII 22 RPV LARGE WASHERS 58'EVEL BG1 VT-1 86.50 VT.1 NDE 4.1-4 C C NDE F 1-33 C*1N/At*037101 4.CH.LQ-22R RPV LARGE KASHERS 58'EVEL 8 G-1 VT-1 NDE 4~1-45 C C 87-BASELINE 86.50 SIN/AOO 037200 4-CH-LII.23 RPV LARGE'MASHERS 58'EVEL 80-1 VT1 86.50 VT.1 VT-1 NDE 4.1-4 C C NDE 4.1-33 NDE 4.1-12 C<<~H/A~>>037201 4.CH.LM.23R RPV LARGE KASHERS 58'EVEL B.G.1 VT 1 NDE 4.1-45 C C 87-BASELINE 86.50'1N/AI*037300 4.CH-LM.24 RPV LARGE MASHERS 58'EVEL 8G1 Vt-1 86.50 VT-1 Vt 1 NDE 4.1-4 HDE 4.1 22 NDE 4.1-12 C 3-19.87-IN PLACE, APPROXIHATELY 360 C DEGREES AROUND NASTAGE.4-4-87-REHOVED SAKE AS IH PLACE 11N/A%1 037301 4.CH LII 24R RPV LARGE MASHERS 58'EVEL B 0 1 VT 1 NDE 4 1 45 C C 87-BASELINE 86.50~~H/A~~
DATE: 07/07/89 REVISION: 3 RP C OSUR HEAD TURKEY POINT NUCLEAR PLAN'f UNIT 4 INSERVICE IHSPECTIOI FINAL REPOR'f TABLES OUTAGE 2 (1987), FIRST PERIIN, SECOND INTERVAL CLASS 1 CONPOHEHTS PACE: 30 ZONE NUHBER: 002 SQDIARY EXAHINA'f ION AREA NNIBER I DENT I F ICATION ASHE SEC.XI CATGY EXAH I TEll NO KEY HCO PROCEDURE N I 0 S OHGT T RSEH A E I 0 E RENARKS T C C N R**CALIBRA'TION BLOCK~i NO 004-037400 4.CH-LM-25 RPV LARGE'MASHERS 58'EVEL 8 G-1 VT-1 86.50 Vf-1 VT-1 NDE 4~1-4 NDE 4.1-20 HDE 4.1-12 C C 3-19 87 IN PLACE, SLIGNT PITTING Q A C APPROX~DEPTH OF 1/16"~4-4 87 REHOVED C SAHE AS IH PLACE.*PN/Ai1 037401 4.CH-LM.25R RPV LARGE'MASHERS 58'EVEL S.G-1 VT 1 HDE 4.1 45 C C 86.50 87-BASELINE*1N/A**037500 4.CH-LM-26 RPV LARGE MASHERS 58'EVEL 801 VT1 86.50 Vf 1 NDE 4.1-4 C HDE 4.1-21 C 3-19 87-IN PLACE, SLIGHT MASTAGE.C 4 4-87-RENOVED SANE AS IN PLACE/APPROX 9" OF DECRADATION ON THE EDGE AND APPROX 6" IHMARD ON THE TOP FACE OF MASHER, 1/32" DEEP.*N/A 037501 4.CH LM-26R RPV LARCE MASHERS 58'EVEL 8 G 1 Vf 1 NDE 4 1 45 C C 86.50 87-BASELINE**N/Ai*037600 4.CH LM 27 RPV LARGE MASHERS 58'EVEL 8.0-1 VT-1 86.50 Vf-1 NDE 4.1 4 C HDE 4.1-26 C 3-19.87-SLICHT EROSION C ieN/A10 037601 4.CH.LM-27R RPV LARGE MASHERS 58'EVEL B.G 1 VT-1 HDE 4.1-45 C C 87-BASELINE S6.50+AH/Aee 037700 4.CH.LM-28 RPV LARCE MASHERS 58'EVEL S.G.1 VT-1 86.50 Vr-I HDE 4.1-5 C C HDE 4.1-26 C 1PN/A%A DA'TE: 07/07/89 REVISION: 3 RPV C OSURE HEAD TURKEY POINT NUCLEAR PLAHT UMIT 4 INSERVICE INSPEC'TION FINAC REPORT TABLES OUTAGE 2 (1987), FIRST PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS H I 0 PAGE: 31 ZONE NUMBER: 002 SQDIARY EXAMINATION AREA NQIBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE 8 OHGT T RSEH A E I 0 E REMARKS T C 0 H R~*CALIBRATIOH BLOCK~R NG MO 04-037701 4.CH.LII.28R RPV LARGE NASHERS 58'EVEL 8 G-1 VT-1 NDE 4.1 45 C C 87-BASELINE 86.50 SON/A10 037800 4-CH LQ.29 RPV LARGE UASHERS 58'EVEL B.G.1 VT-1 NDE 4.1-5 C C 87 COMPLETE 86.50 VT.1 NDE 4.1-26 C*~H/A~~037900 4 CH Lil 30 RPV LARGE IIASHERS 58'EVEL 8-0-1 VT-1 86.50 VT-1 NDE 4.1-5 C C 87-COMPLETE HDE 4.1 26 C 10N/Ato 038000 4-CH LII-31 RPV LARGE UASHERS 58'EVEL 8 G-1 VT-1 86.50 VT-1 NDE 4.1-5 C C 87 COMPLETE NDE 4.1-26 C*~M/A~*038100 4.CH.LII.32 RPV LARGE NASHERS 58'EVEL 8.0-1 VT-1 86.50 VT~1 NDE 4.1.5 NDE 4.1-26 C C 87-CCHPLETE C seH/Aae 038200 4.CH-LN.33 RPV LARGE NASHERS 58'EVEL 8-G 1 VT-1 86.50 VT 1 NDE 4.1-5 C C 87 COMPLETE NDE 4'-26 C*~H/A~~038300 4.CH-LM.34 RPV LARGE llASHERS 58'EVEL 8 G-1 VT-1 86.50 VT-1 NDE 4.1-5 NDE 4.1 26 C C 87-COMPLETE C%ON/A0k DATE: 07/07/89 REVI SION: 3 R C R N TURKEY POIHT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIN, SECOHD INTERVAL CLASS 1 COHPONEHTS ZONE HUHSER: 002 SUHHARY EXAHIHATIOH AREA HUNSER IDENT IF ICATI OH ASHE SEC.XI CATGY EXAH ITEH NO HETHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REHARKS T C G H R**CALISRATIOH BLOCK~R F DMG NO 004.038400 4.CH-LM-35 RPV LARGE MASHERS 58'EVEL 8.0-1 VT-1 86.50 VT-1 NDE 4ol-5 C C 87-CDHPLETE HDE 4.1-26 C N*H/A%0 038500 4 CH LM-36 RPV LARGE MASHERS 58'EVEL S.G.1 VT-1 86.50 VT-1 HDE 4.1-5 C C HDE 4~1-34 C 87-COHPLETE~*N/A~~038600 4 CH LM-37 RPV LARGE MASHERS 58'EVEL 8 0-1 VT-1 86.50 VT-1 HDE 4.1-5 C C NDE 4.1-34 C 87 COHPLETE~*H/A~~041200 4-CH Ql 5 RPV SHALL MASHERS 58'EVEL 8-G-1 VT-1 86.50 VT.1 NDE 4.1-6 C C NDE 4.1-35 C**H/A 0*041300 4-CH.QI.6 RPV QIALL MASHERS 5S'EVEL B.G 1 VT 1 86.50 VT 1 NDE 4.1-6 C C NDE 4.1-35 C f 1H/A11 041400 4-CH Ql-7 RPV SHALL MASNERS 58'EVEL 8-G-1 VT-1 86.50 VT 1 NDE 4~1-6 C C NDE 4.1-35 C*~H/A*~041500 4.CH-Ql-8 RPV QlALL MASHERS 58'EVEL B.G 1 VT 1 86.50 VT 1 NDE 4.1-6 C C NDE 4.1-35 C~~N/A~~
DATE: 07/07/89 REVI S ION: 3 RPV C H TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIOH FINAL REPORT TABLES OUTACE 2 (1987), FIRST PERICO, SECOND INTERVAL CLASS 1 CIHIPONENTS PACE: 33 ZONE HINR: 002 SWHARY EXANINATION AREA NINR IDENT IF ICATION ASHE SEC.XI CATGY EXAH ITBI NO HETHCO N I 0 S ONGT T RSEH A E I 0 E REHARKS PROCEDURE T C G H R ttCALIBRATIOH BLOCK*'004 041600 4 CH.SM.9 RPV QIALL MASHERS 5$'EVEL 8 0-1 VT-1 86.50 VT-1 HDE 4.1-6 C C NOE 4.1-39 C'ttH/A11 041700 4 CH-SM 10 RPV SHALL MASHERS 58'EVEL 8 0-1 VT-1 86.50 VT-1 ROE 416 C C NOE 4.1-39 C ttH/A 11 041800 4 CH SM 11 RPV SHALL MASHERS 58'EVEL 8 0 1 Vl'-1 86.50 VT.1 HDE 4.1-6 C C NOE 4.1-39 C**N/A11 041900 4.CH QI 12 RPV SHALL MASHERS 5S'EVEL 8G1 VT-1$6.50 VT-1 NOE416 C C NOE 4.1.42 C t1H/Att 042000 4.CH.QI.13 RPV QIALL MASHERS 5S'EVEL 8-G-1 VT 1 86.50 VT-1 HDE 4.1.6 C C HOE 4.1 42 C**H/Att 042100 4-CH-QI.14 RPV QIALL MASHERS 58'EVEL BG1 VT1 86.50 VT-I HOE 4~1.6 C C HOE 4.1-39 C 1*H/Att 042200 4.CH.QI.15 RPV SHALL MASHERS 58'EVEL 8.0-1 VT.1 86.50 VT-1 HDE 4.1 6 NDE 4.1-39 C C C**H/A 11 DATE: 07/07/89 REVISION: 3 RP CL H TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIO, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 34 ZONE NUMBER: 002 SUHHART EXAM INAT IDH AREA HUHBER IDEHT IF ICATION AQlE SEC.XI CAT GY EXAM I TEll HO HETHDO PROCEDURE N I 0 S ON 0 7 T RSEH A E I 0 E REMARKS T C 0 H R 1>>CALIBRATIOH BLOCX>>>>R F DllG MO 004-042300 C-CH-Ql-16 RPV SHALL MASHERS 58'EVEL 8 G-1 VT-1 86.50 VT-1 HDE 4.1.6 C C HDE 4.1-39 C*>>N/A>>1 042COO 4-CH.SM-I7 RPV SHALL llASHERS 58'EVEL 8G1 VT-1 86.50 VT-1 NDE 4 1 6 C C NDE 4.1-39 C>>>>H/A>>1 042500 4 CH-Sll 18 RPV SHALL MASHERS 58'EVEL 8-G 1 VT-1 86.50 VT-1 NDE4~16 C C HDE 4.1-29 C 1>>N/A11 042600 4.CH SM 19 RPV SHALL MASHERS 58'EVEL 8-0-1 VT-1 86.50 VT-1 HDE 4.1.6 C C NDE 4.1-33 C t>>N/A*1 042700 4.CH.QI 20 RPV SMALL MASHERS 58'EVEL 8 G-1 VT-1 86.50 VT-1 HDE 4.1-6 C C MDE 4.1-33 C>>>>H/A>>>>042800 C.CH.QI-2'I RPV SHALL llASHERS 58'EVEL 8 G-1 VT-1 86.50 VT-1 KDE 4.1-6 HDE 4.1-33 C C 87 COMPLETE C*>>N/A*1 042900 4.CH.QI-22 RPV SHALL MASHERS 58'EVEL 8G1 VT-1~86.50 VT 1 NOE 4.1 6 C C NDE 4.1-33 C*>>N/A>>*
DATE: 07/07/89 REVIS ION I 3 RPV CLOSUR H TURKET POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIDH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIIX), SECOND INTERVAL CLASS 1 COHPONEHTS PAGE: 35 ZONE NUMBERS 002 SNNIARY EXAHI HAT I ON AREA NNIBER IDENTIFICATION AQIE SEC.XI CATGY EXAH ITEN NO HETHCO PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R 11CALIBRATION BL~R F DUG NO 004 04290'I 4.CH.QI-22R RPV SHALL NASHERS 58'EVEL 8 G 1 Vl'-1 HOE 4~1-47 C C 87-BASELINE 86.50 11H/Att 043000 4 CH QI-23 RPV SHALL IIASHERS 58'EVEL BG-1 VT1 HDE4.16 C C 86.50 Vr-1 MDE 4.1-12 C*1M/At t 043001 C.CH.QI 23R RPV QIALL NASHERS 58'EVEL 8 G-1 VT-1 NDE 4.1-47 C C 87-BASELINE 86.50 1*M/At 1 043100 4-CH-Ql-2C RPV QIALL NASHERS 58'EVEL 8 G-1 86.50 VT-1 VT-1 VT-3 MDE4~16 MDE 4.1-22 MDE 4.3.6 C C 3-19-87-IN PLACE, SLIGHT OEGRADATIDN.
C 4-4 87-REHOVED 8" AREA llASTAGE~1/321 C TO 1/16" IH DEPTH.~1N/A*t 043101 4.CH.QI-24R RPV SHALL llASHERS 58'EVEL 8 G 1 VT-I MDE 4.1-47 C C 87-BASELINE 86.50*1H/A*t 043200 4.CH.QI 25 RPV SHALL llASHERS 58'EVEL 8-0-1 86.50 VT-1 VT.1 VT-1 NDE 4.1-6 NDE 4.1-20 NOE 4.1-12 C 3-19 87-IN PLACE SLIGHT DEGRADATION.
C 4 4-87-REHOVED, SAHE AS IN PLACE~360 DEGREES 1/321 DEPTH.ttH/Att 043201 4 CH QI.25R RPV SHALL NASHERS 58'EVEL B 0-1 VT-1 NDE 4.1-47 C C 87-BASELINE B6.50 11N/Att DATE: 07/07/89 REVIS IOI: 3 P C OSUR H TURKET POINt NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTION FINAL REPORt TABLES OUTAGE 2 (1987), FIRST PERIIXI, SECOND INTERVAL CLASS 1 COHPONEHTS N I 0 PAGE: 36 ZONE KUHBER: 002 SUHHARY EXAHIKATIOH AREA NUHBER IDENTIFICATION AQlE SEC.XI CATGT EXAK ITEN NO KETHOD PROCEDURE S OHGT T RSEH A E I 0 E REHARKS T C G K R 1*CALIBRATION BLOCK 1 REF DMG.NO 004-043300 4 CH-QI.26 RPV SHALL MASHERS 58'EVEL 8 G-1 VT-1 86.50 VT-1 NDE 4~1-6 NDE 4.1-21 C C 3-19-87-IK PLACE, SLIGHT DEGRADATIOI, C 4-4 87 REHOVEO, 10" OF MASTAGEe 11K/A11 043301 4-CH.QI-26R RPV SHALL MASHERS 58'EVEL B.G-1 VT-1 86.50 HDE 4.1 47C C 87~BASELINE 1*N/A1 1 043400 4 CH-QI 27 RPV SHALL MASNERS 58'EVEL 801 86.50 VT-1 Vt.1 VT-1 NDE 4.1 6 NDE 4.1 28 HDE 4.1-31 C C 3-19 87 IN PUCE SLIGHt DEGRADATIOH.
C 5/8" LONG X 1/4" HIDE X 1/16" DEEP MITH C SEVERAL PITS APPROX.1/16" X 1/321 DEEP.11H/A1*043401 4.CH.SM.27R RPV SHALL MASHERS 58'EVEL BG'I VT1 86.50 NDE 4.1 47 C C 87-BASELINE 11H/A11 043500 4 CH-QI 28 RPV SHALL MASHERS 58'EVEL B.G 1 VT-1 86.50 VT-1 NDE 4.1-7 HDE 4.1-28 C C C 1*H/A1*043501 4.CH SM 28R RPV QIALL MASHERS 58'EVEL 8.0.1 VT-1 NDE 4.1-47 C C 86.50 87.BASELINE**N/A1 1 043600 4-CH.QI 29 RPV SHALL MASHERS 58'EVEL 8G1 VT-1 86.50 VT.1 NDE 4.1-7 C C NDE 4.1-28 C 87-COKPLETE**H/A**
DATE: 07/07/89 REVISION: 3 RP CLOSURE H AD TURKET POINT KUCLEAR PLANt UMIT 4 IHSERVICE IHSPECTION F IHAL REPORT TABLES OUTAGE 2 (1987), FIRSl'ERIIN, SECOKO INTERVAL CLASS 1 CDHPONEHTS PAGE: 37 ZONE MUHBER: 002
SUMMARY
EXAHIMAT ION AREA MIRIBER IDEMl'IF ICATION ASHE SEC.XI CANT EXAH ITEN MO METHOD PROCEDURE N I.0 S OMGT T RSEH A E I 0 E REHARKS T C G H R t*CALIBRATION BLOCK R M 004.043700 4.CH.SM.30 RPV SHALL NASHERS 5S'EVEL 8G1 Vt-l 86.50 VT-'I KDE 4.1-7 C C NDE 4.1-28 C 87-COMPLETE ttN/Att 043800 4 CH SM-31 RPV SHALL MASHERS 58'EVEL 8G1 86.50 Vt-1 KDE 4.'l-7 C C 87-COMPLETE MDE 4.1-28 C ttH/At*043900 4 CM SN-32 RPV SHALL MASHERS 58'EVEL BG-1 Vt 1 86.50 VT-1 KDE 4.1-7 C C 87-COIPLETE KDE 4.1-28 C ttH/Att 044000 4 CH.NI 33 RPV SHALL MASMERS 5S'EVEL 8 G-1 VT-1'DE 4.1-7 C C 87-COHPLETE 86.50 VT-1 MDE F 1-28 C t*N/A**044100 4.CH.SM 34 RPV QNLL MASHERS 58'EVEL 8 G.l VT-1 86.50 VT-1 MDE 4.1-7 HDE 4.1.28 C C 87-COMPLETE C ttM/A'tt 044200 4 CH-Ql 35 RPV QIALL MASHERS 58'EVEL 8G1 VT-1 86.50, VT.1 NDE 4.1-7 XDE 4.1-28 C C 87 CIWPLETE C**K/Att 044300 4.CH-SN-36 RPV SHALL MASHERS 58'EVEL 8 0-1 VT-1 86.50 Vt-1 MDE 4~1-7 HDE 4.1-34 C C 87 CIMIPLETE C t*H/Att DATE: 07/07/89 REV I SION: 3 RPV CI.OSUR N AD TURKET POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTION FIHAL REPORT TABLES OUTAGE 2 (1987), FIRST PERIOD, SECOND INTERVAL CLASS 1 CQIPOHEHTS PAGE: 38 ZONE HUHBER: 002 SUHHAR'T EXAHIHATION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEII NO HETHOO PROCEDURE H I 0 S ON 0T T RS EH A E I 0 E RCHARKS C 0 II R>>>>CALIBRATIOH BLOCX>>R F DWG NO.004-044400 4.CH.SM-37 RPV SHALL MASHERS 58'EVEL 801 VT1 86.50 VT-1 HDE 4.1-7 NDE 4.1-34 C C C 87 COHPLETE>>>>N/A>>*046600 4 CRD 47 Bl-HATTALIC MELD-CRD 58'EVEL 80 PT 814.10 HDE 3.3.9 C C 4-10.87 VT OF CRO HOUSING.4-10.87-PT OF Bl HATTALIC MELD*>>H/A>>>>046700 4-CRD-53 Bl-HATTALIC MELO-CRD PENETRATION 58'EVEL 8 0 VT-1 814.10 PT HDE 4~1-24 C C 4-10.87-VT OF CONOSEAL BIHATTALIC NDE 3.3-10 C MELD.4-10 87~PT OF BIHATTALIC MELO.*>>H/A>>>>046800 4-CRD-65 Bl HATTALIC MELO CRD PENETRATION 58'EVEL 8-0 814.10 VT-1 PT NDE 4.1-24 HDE 3.3.11 C C 4-10 87-VT ON BINATTALIC MELD.C.PT OF BIHATTALIC IIELD~>>*H/A>>*046900 4.CRD-53 UPPER SEAL MELD-CRD PENETRATION 58'EVEL 8 0 VT-1 KDE 4.1-25 C C 814.10 4 10 87-VT ON SEAL MELD.4-10 87 PT OH SEAL IIELD PRIOR TO CUT FOR REPLACEHENT.
>>>>H/A>>>>047100 4-CRD 47 PENETRATION AREA-CRO 58'EVEL B.E VT 1 HDE 4.1-24 C C 84~11 4-10.87-HO DEGRADATION OF PEHETRATIOH AREA.>>>>N/A>>>>
DATE: 07/07/89 REVI SION: 3 PV C OSUR HEAD'URKEY'POINt NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTIOH FIKAL REPORT TABLES IXITAGE 2 (1987), FIRST PERICO, SECOND INTERVAL CLASS 1 CQIPONEHTS N I 0 PAGE: 39 ZONE KUMBERc 002 SUHHART EXAMINATION AREA NUMBER IDENT IF I CATION ASHE SEC.XI CATGY EXAH ITEN NO HETHOD PROCEDURE S ONGT T RSEH A E I OE T CGHR REHARXS ttCALISRATIOH BLOCX 1 R 0.NO.004-047300 4-CRD-65 CRD HOUSINGS 58'EVEL BE VT1 NDE4.124 C C 84.11 4-10.87 CCHPLETE ttM/Att 047500 4-CRO-27 CRD HOUSINGS 58'EVEL B.E Vt 1 NDE 4.1-24 C C 84.11 4-10-87 CCHPLETE 1*N/Att 047600 4.CRD 33 CRO HOUSINGS 58'EVEL 8 E Vt~1 NDE 4~1-24 C C 4-10-87 COMPLETE 84.11*1M/A1*047700 4.CRD.41 CRD HOUSIKGS 58'EVEL B.E VT-1 NDE 4.1-24 C C 4-10-87 COHPLETE 84.11*1H/Att 048100 4 HS H-1 THRU 4-HS-H.58 RPV HEAD HATING SURFACE 58'EVEL B.N-1 813.10 VT-3 VT-3 VT-1 MDE 4.3-3 NDE 4.3-6 MDE 4.1-44 C 4-6-87-Ol VESSEL SIDE DURIHG HEAD C LIFt, 1 OUTER RING OF VESSEL HAS C OXIDATION 8 RUST, 2 DEB ISTIMG OF A)RAG, 8)PLASTIC CAP C)CAKED BORON DEPOSITS.THE SEALING ANO HATING SURFACES llERE CLEAR*1M/Att 048600 4 HS 04 TO 4.HS 037 FLANGE HATING SURFACE GAP 58'EVEL 8 A 81.40 VT.1 VT 3 VT-3 VT.I NDE 4.1-10 NDE 4.3-6 NDE 4.3-3 KDE 4.1 44 C C 3-19 87 CCHPLETE 4.1-10: 4 27 87 PRIOR C TO CLEAHIMG:4 4 87 REVIEM OF VIDEO TAPE: 4-18.87 FLANGE HAtlMG SURFACE A THIN LIME 1/16" OF BORIC ACID RESIDUE ttH/Att DATE: 07/07/89 REV IS ION: 3 RPVC R MAD'IURKEY POINT NUCLEAR PLAHt UHIT 4 INSERVICE IHSPECTIOH FINAL REPORt TABLES OUTAGE 2 (1987), FIRST PERIIXI, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 40 0 ZONE NUMBER: 002 SUHHARY EXAHI MA't I ON AREA NUMBER IDENTIF ICATIOH ASHE SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REHARKS T C G II R++CALIBRATION BLOCK N PTN40 049000 4-CPS.02 COHO SEAL HEAD PENETRATIOH BASE HETAL 58'EVEL 8 E 84.11 VT-1 VT-1 VT-1 HT Ut-T NDE 4.1 8 HDE 4.1-24 MDE 4.1-43 MDE 2.2.8 MDE 5.14-1 C C 87-1 1/4XB 1/2" ERRODEO AREA 1/4" C DEPTH: SLIGHT EROSION OF PENETRATION C AREA GAP ROUNDED:NCR 87-01,HCI-87.01R AND NCR 87-0072: 18" AREA AMD HASTAGE HT: UT THICKNESS*NH/A*0 R F ONG NO.004 V 049200 B.E VT-1 NDE 4~1-13 C C 3.27-87 LEAKING CONOSEAL SPLIT RING-CONOSEAL HALE 84~11 58'EVEL~~H/A~~049300 CLAMP-CONOSEAL HALE 58'EVEL B.E 84.11 VT-1 NDE 4.1-14 C 3-27 87 ALL BOLTS HAVE PITS AND CORROS I OM~ONE BOLT HAS EROS I NCR-87.0078:
4*H/A*0 049400 BOLTS CONOSEAL HALE 58'EVEL 8 E 84.11 VT-1 HDE 4.1-14 C C 3-27.87 BORIC ACID RESIDUE, SEVERE EROSION AND PITTING:**M/AOO 049500 NUTS-COMOSEAL HALE 58'EVEL 8 E VT-1 NDE 4.1-14 C C 3.27 87 BORIC ACID RESIDUE PRESENT.84.11*~H/A~~049600 FLANGE CONNECTION
-COMOSEAL HALE 58'EVEL B.E 84.11 VT.1 VT-1 VT-1 HDE 4.1-19 HDE 4.1-13 NDE 4.1-15 C C 3-27-87-BORIC ACID RESIDUE PRESENT.C SPLIT RING C BORIC ACID HCR 87 0078 N/A DATE: 07/07/89 REVI SION: 3 RPV CLOSUR M AO TURKEY POINT NUCLEAR PLNIT UNIT 4 IHSERVICE IMSPEC'TIOH FINAC REPORT TABLES OUTAGE 2 (1987), FIRST PERI(X), SECOND INTERVAL CLASS 1 COHPONEHTS PAGE T C1 ZONE NISIBER: 002 SINHARY EXAHI MAT I OH AREA MNISER IDEN'(IF ICATION ASHE SEC.XI CANT EXAN I TEN NO HETHOO PROCEDURE N I 0 S ON 0T T RSEH A E I 0 E REMARKS T C 0 H R<<<<CALIBRA'TION BLOCK 049601 FEMALE FLANGE 58'EVEL 8 E 84.11 VISUAL VISUAL VISUAL VISUAL VISUAL PT PT PT PT NDE-110 001 NDE-110.002 HDE-110 003 NDE-110.004 MDE-110 005 NDE-210.001 MDE-210.002 MDE-210 003 NDE 210 004 C C C C C C C C C C 4-3 87 IIESTINGHDUSE PERFORMED THE REPAIR UNDER PROCEDURE HP 2.7.1/FLA 4: INSTRUMENT PORT FEHALE P87-3210: II DUG¹6121E91 GO1 REV 5: 1<<N/A<<<<049700 B.E VT-1 MDE 4.1-15 C C 3-27.87-BORIC ACID RESIDUE)SCRATCH, JACK.SCRENS (6)-COHOSEAL B4.11 CRIHPEO AREA, HICKS, T<<.054" HALE 58'EVEL~<<N/A**04980D 8 E VT 1 MDE 4~1-16 LONER GASKET-CONOSEAL HALE BC.1'I 58'EVEL C C 3-27-87-SEVERLY OEFORHED AND SENT, T.035", OO<<2.630", lllDTH~**N/A<<1 049900 B E VT 1 NDE 4 1 17 C C 3-2T 87-RING BROKEN, HIMOR DENTS AND UPPER GASKET COMOSEAL HALE 84+11 NICKS/EDGES SENT, ID OIA.<<4.93" 58'EVEL I<<H/A1*050000 8 E SEAL MELD RIHG-CONOSEAL HALE 84.11 58'EVEL VT-1 NDE 4.1 18 C 3-2T-87-DENTS (1.1",.68"), 2 LINEARS C (1.0",.5"), DENTS OH ADAPTOR LENGTH~.43", NICKS OM ALL EDGES'<<H/A<<1 050100 S E VT-1 NDE 4.1-18 C C 3 27-87 COHPLETE SEAL MELD RING-CONOSEAL HALE B4.11 58'EVEL~<<H/A*1 DATE: 07/07/89 REVISION: 3 RPV CL R M AD TURKEY POINT NUCLEAR PLANT UHIT 4 INSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 2 (1987), FIRST PERI(X), SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 42 ZONE NUMBER: 002 SUHHARY EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEN NO HETMOO PROCEDURE H I 0 S ONGT T RS EH A E I 0 E REMARKS T C G H R n*CALIBRATION BLOCK n RP R D N PTN403 050300 4-LL 02 LIFTING LUG 58'EVEL B.H VT-3 88.10 HT VT-1 MDE 4.3 2 C C NDE 2.2-1A C NDE 4.1-23 C 3-19 87 VT-3 ACCEPTABLE PER SECTION XI 3 20.87 HT ACCEPTABLE 4-6-87 VT-'1 COHPLETE eeN/Ann 050400 4.SL-02 SUPPORT LUG 58'EVEL<<8 H 88.10 VT-3 VT-1 HT VT-3 NDE 4.3 1 MDE 4.1.23 MDE 2.2 8 NDE 4.3 6 C 3-19 87-AS FOUND, NUT 8 BOLT ERCOEO C AUAY, BORIC ACID, EROSION, INCLUDES AS FOUND DIMENSIONAL SKETCHES.4.6.87.C VISUAL AFTER INSULATION REMOVAL, (2)AREAS 1n BY.7", AND A 1n ROND AREA ON BASE HETAL.4-10 87 HT OF BASE METAL AROUND LUG.(87 0107)*M/A 050401 4.SL 02A SUPPORT LUG 58'EVEL 8 H 88.10 HT PT PT HT IHSP RPI'T PT VISUAL HT INSP RPT INSP RPT INSP RPT 9.4 C0318.87P 9.5 H10073 9.5 H10056 9.4 H10174 10.1 H10112 9.5 H10173 9.5 H10175 9.1 H10125 9.4 H10126 10.1 H10072 10.1 H10176 10.1 H10110 C C 87 BASELINE FOR REPAIR AND REPLACEMENT C OF LUG: H10126 4-16 87 PSI C C C n 1N/An*C C C C C C C 050500 4 CH BH DAMAGED AREA-BASE HETAL 58'EVEL 8 E VT-1 NDE 4.1 9 C 84.11 HT NDE 2.2-8 C UT THICK NDE 5.14-1 C C 3 19 87-AS FOUND, SANE AREAS AS CONOSEAL PENETRA'TIOM.4 10 87-HT OF AN 18n AREA FROH THE COMOSEALOOUM TO TNE FLANGE.4-10-87-O'I THICKNESS, CONTIHIOUS SCAN OF 18n AREA, NO AREAS BELCH 6.8", AVERAGE THICKNESS OM HEAD TO BE 7.0n.~nM/An*
DATE: 07/07/89'REVISION:
3 RPV CLOSUR HEAD TURKEY POIHT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 2 (1987), FIRST'ERIIe, SECOND INTERVAL CLASS 1 CCKPOHEHTS PAGE: 43 ZONE NUMBER: 002
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASNE SECa XI CATGY EXAM I TEH MO METHOD N I 0 S ONGT T RS EH A E I 0 E REMARKS PROCEDURE T C G N R**CALIBRA'TION BLOCK~R DUG MO 004 050600 4 DA.01 8-E DAMAGED AREA ON C.H.FLANGE-84.11 BASE METAL 58'EVEL VT-1 NT VT-1 MDE 4.1-9 HDE 2.2 8 NDE 4.1 23 C C 87-COMPLETE C~~H/A~~
0 ATTACHMENT 2 FORM NIS-BB OWNER~S DATA REPORT FOR EDDY CURRENT EXAMINATION RESULTS'NIT 4 CYCLE 12 REFUELING OUTAGE 0
FORM NIS-BB'WNERS~
DATA REPORT FOR EDDY CURRENT EXAMINATION RESULTS As recpxired by the provisions of the ASME Code Rules Page 1 Of 5
SUMMARY
OF EDDY CURRENT EXAMINATION RESULTS P LANT TURKEY POINT NUCLEAR POWER PLANT UNIT NO.4 EXAMINATION DATES: October 27, 1988 THRU November 15, 1988 STEAM GEN NUMBER TOTAL TUBES INSP TOTAL IND FROM 204 TO 394 TOTAL IND.THAN OR=40%TOTAL TUBES PLUGGED AS PREVENTIVE MAINT TOTAL TUBES PLUGGED 4E210A 4E210B 4E210C 3q 199 3g207 3i205 LOCATZON OF INDICATZONS STEAM GENERATOR AVB BARS SUPPORTS 1 THROUGH 6 TOP OF TUBE SHEET TO FIRST SUPPORT HOT LEG COLD LEG HOT LEG COLD LEG 4E210A 4E210B 4E210C CERTIFICATION OF RECORD We certi.fp.-
that the statements in this record are correct and the tubes inspected were tested full length in accordance with the requirement's:
of Section XI of the ASME Code.FLORIDA POWER and LIGHT COMPANY 0 Date: By: 97 (Organisation)
E SUPERVISOR P 1 Wv STEAM GENERATOR TUBES PLUGGED page 2 of 5 STEAM GENERATOR 4E210A STEAM GENERATOR 4E210B STEAM GENERATOR 482 10C RON COLUMN REMARKS ROW COLUMN REMARKS ROW COLUMN HOT LEG 98 1" R.~
FORM NIS-BB OWNERS~DATA REPORT POR EDDY CURRENT EXAMINATION RESULTS As required hy the prove.sions af the ASME Cade Rules page 3 of 5 EDDY CURRENT EXAMINATION RESULTS PLANT: TURKEY POINT NUCLEAR POWER PLANT UNIT NO.4 STEAM GENERATOR:
4E210A EXAMINATION DATES 11-07-88 THRU 1 1-15 88 ROW 28 COLUMN 14 TUBE WALL PENETRATION 37 34 ORIGIN 01H 42~1 02C 2'LOCATION HOT LEG COLD LEG 33 19 05H 42'HOT LEG 26 24 25 03H~0 HOT LEG 29 25 35 36 04H 5'01C~0 HOT LEG COLD LEG 14 82 27 04C 9~2 COLD LEG 99 Ept 0 FORM NIS-BB OWNERS'ATA REPORT FOR EDDY CURRENT EXAMINATION RESULTS As required hy the provisions of the ASME Cade Rules page 4 af 5 EDDY CURRENT EXAMINATION RESULTS PLANT TURKEY POINT NUCLEAR POWER PLANT UNIT NO.4 STEAM GENERATOR.
4E2 10B EXAMINATION DATES 10-27-88 THRU 11-05-88 ROW COLUMN TUBE WALL PENETRATION ORIGIN LOCATION 21 03C 25~5 COLD LEG 37 69 37 02H 19'HOT LEG 75 82 34 22 29 01H 48'02H 15~0 02H 15 7 HOT LEG HOT LEG 4 100 wA>>tg c4>
FORM NIS-BB OWNERS DATA REPORT FOR EDDY CURRENT EXAMINATION RESULTS As recpxired hy the provisions of the ASME Cade Rules page 5 of 5 EDDY CURRENT EXAMINATION RESULTS PLANT: TURKEY POINT NUCLEAR POWER PLANT UNIT NO.4 STEAM GENERATOR!
4E210C EXAMINATION DATES: 10-29-88 THRU 11-05-88 ROW 17 COLUMN 16 TUBE WALL PENETRATZON 35 ORIGIN 05H 47'LOCATION HOT LEG 38 22 27 05C 38'COLD LEG 26 37 24 05C 31~2 COLD LEG 43 48 30 06C-~6 COLD LEG 17 73 AV2 2~1 HOT LEG 101 y~4~,K J Ir COMPONENT:
S/G A KJMMULATIVE DISTRIBUTION
SUMMARY
TURKEY POINT 4 10/88 Page: 1 of 1 Date: 04/17/89 Time: 1:58 PM Examination Dates: 10/27/88 thru 11/15/88 Total Number of Tubes Inspected.....: 3199 Total Indications Between 204 and 394 Greater than or equal to 40%Total Tubes Plugged as Preventive Maint Total Tubes Plugged Location Of Indications 204 to 1004 7 0 Hot TSH-.5 01H-2.0 06H+2.1 AV1-3.0 Leg to 01H-2.1 to 06H+2.0 to AV1-3.1 to AV4-3.0 0 0 0 Cold Leg TSC-.5 to 01C-2.1 01C-2.0 to 06C+2.0 06C+2.1 to AV4-3.1~0 0 3 0 A4)gal~II'
PLUGGABLE TUBES LIST TURKEY POINT 4 10/88 Page: 1 of 1 Date: 04/18/89 Time: 8:05 AM+++++++++++++)2)5)3]06C[H]++++++l045AH+/REQ//TESTED/ROM/LINE/ZONE(EXT(LEG/
EXTENT/REEL+++++++I I I'I j I I J CH/PROBE/LOCATION/X/Volts/Deg/
Dataset++++++++I 1680 SF/RM I 0 ITRSI I OIBALAHCE I+++++++Humber of Pluggable Tubes: Number of Indications Selection Criteria: PerCent TA....: 40 Includes ADI,HOI,DSI,DTI,DRI,LPI,TBP,TRS,PTP Codes CUHHULAT I VE EXAHI HAT lOll REPORT TURKEY POINT 4 OUTAGE: 10/88 COHPONENT: S/G A DESCRIPTION:
20X TO 100X page: 1 of 1 Date: 4/'l7/89 Time: 3:05 PH I (Extent/Roe/CoIJLeg/Req(Tst/Note/
Reel J Probe I I I I I I"-I-----------
I 28I 14I H ITECITEC PSI004AH I720-SF/RH I I I H ITECITEC SSIOO"AH l720 SF/RH I 33I 191 H ITECITEC PSI006AH 1720-SF/RH I 26I 24I H ITECITEC PSI008AH (720-SF/RH I 29I 251 H ITECITEC PSI009AH 1720-SF/RH I I I H ITECITEC PSI009AH I720-SF/RH I 14I 82I H ITECITEC PSI039AH 1720-SF/RH I---I---I-I I I-I-I 10/88 I I Location/Volts/Deg/Ch
/X/Diff/I--------------I-----I-I-I"-I----I-
/01H 42.1 J 1.1/145/1(37//02C 2.6/.5/149/1(34/IOSH 42.8 I 1.7I 159I 1I 24I I/03H.0/.5/142(H 1/25/I04H 5.8 I 1.2I147I 1I 351 I/01C.0/.6(132/H 1/36//04C 9.2/.8(155/1/27(I---------I----I---I---I-I I N/A I Location (Volts(geg/Ch
/X (-----------I
---I---I--I--I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I--I-----I--I--I---I Number of INDICATIONS Selected from Current Outage: 7 Number of TUBES Selected from Current Outage: 5 CUHMULATIVE EXAMINATION REPORT TURKEY POINT 4 OUTAGE: 10/88 COMPONENT: S/G A DESCRIPTION:
20X TO 3&', Page: 1 of 1 Date: 4/17/89 Time: 3:05 PM I f Extent (Row(Col/Leg)Req/Tst/Note(Reel/Probe I--I--I---I-I-"" I-"--I----------
J 28'4'iTECJTEC PSi004AH i720-SF/RM I I I H ITECITEC SSI004AH I720.SF/RM I 33I 191 H ITECITEC PSI006AH 1720-SF/RM I 26I 24I H ITECITEC PSI008AH I720-SF/RM
/29/25/H/TEC/TEC PS/009AM/720-SF/RM I I I H ITECITEC PSI009AH I720.SF/RM I 14I 82I H ITECITEC PSI039AH l720.SF/RM I--I---I-I I" I-I-I 10/88 I I Location/Volts/Deg)Ch
/I/Diff/-I---------"--I-----I-I I I I I01H 42.1 I 1.11145I 1I 37I I l02C 2.6 I.5l149I 1I 34I I I05H 42.8 I 1.7I159I 1I 24I I/03H.0 f.5(142iM 1/25(I04H 5.8 I 1.2I147I 1I 35I I I01C.0 I ,.6I132IM 11 36I I (04C 9.2/.8)155/1(27/I-"-----I---I---I--I-I I N/A I Location (Volts(Deg)Ch J X,/-I----I--I---I-" I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I-I---I--I Number of INDICATIONS Selected from Current Outage: 7 Hmher of TUBES Selected from Current Outage: 5 COMPONENT: S/G B CUMMULATIVE DISTRIBUTION
SUMMARY
&JET Y POINT 4 10/88 Page: 1 of 1 Date: 04/17/89 Time: 1:59 PM Examination Dates: 10/27/88 thru 11/15/88 Total Number of Tubes Inspected 320 7 Total Indications Between 204 and 39%Greater than or equal to 404 Total Tubes Plugged as Preventive Maint Total Tubes Plugged Location Of Indications 204 to 1004 5 0 0 0 Hot Leg TSH-.5 to 01H-2.1 01H-2.0 to 06H+2.0 06H+2.1 to AV1-3.1 AV1-3.0 to AV4-3.0 0 4 0, 0 Cold Leg TSC-.5 to 01C-2.1 01C-2.0 to 06C+2.0 06C+2.1 to AV4-3.1 0 1 0 b'(
CUMMULAT I VE EXAMI HAT ION REPORT TURKEY POINT 4 OUTACE: 10/88 OMPOHEHT: S/G B t DESCRIPTIOH:
20X TO 100X-'.Page: 1 of 1 Date: 4/17/89 Time: 3:06 PM I (Extent (Row(Col(Leg(Req(Tst/Note(Reel I---I---I-I I I I 31 24(H ITECITEC PC(009BH (37(69(H (TEC(TEC PS(034BH I 13(75(H ITECITEC PC(036BH H (TEC(TEC PS(036BH I 141 82(H ITECITEC PS(0398M I"-I"I--I-I-I Probe I (720-SF/RM (720 SF/RM (720-SF/RM (720-SF/RM (720-SF/RM I (03C 25.5 (02H 19.3 (01H 48.8 (02H 15.0 (02H 15'I.6(155(1(.6(142((.6(141(1(I 1.6(158(11 I 1.11149(1 I I I I I 21((37(34(I 22(29(I-I-I I I I I I I I I I I I I I I I I I I I I" I---I---I I 10/88 I I N/A I Location (Volts(Deg(Ch (I (Diff(Location (Volts(Deg(Ch (X (I-------I----(-"I
-((---(-----I---I" I---I---I Nunber of INDICATIONS Selected from Current Outage: 5 Number of TUBES Selected from Current Outage: 4 CUMMULAT I VE EXAMINATION REPORT TURKEY POINT 4 OUTAGE: 10/88 PONENT: S/G B DESCRIPTION:
20X TO 39K Page: 1 of 1 Date: 4/17/89 Time: 3:06 PM+I (Extent (Row(Col/Leg/Req/Tst/Note/
Reel I---I" I--I I I I 3I 24I H ITECITEC PCI009BH i 37'9/H/TEC/TEC PSi034BH I 13I 751 H ITECITEC PCI036BH I I I H ITECITEC PSI036BH I 14I 82I H ITECITEC PSI039BH I I I I I I Probe-I------------
(720-SF/RM i720-SF/RM i720.SF/RM i720.SF/RM I720 SF/RM I 10/88 Location iVoltsiDegi I-------------
I---I-I I03C 25.5 I.6I155I/02H 19.3 I.611421 i01H 48.8/.6)141/102H 15.0 I 1.6 I 158 I I02H 15.7 I 1.1I149I I-------------
I--" I-I 1I 21I I 1I 37I I 1f 34(1I 22I I 1>29'I I I I I I I I I I I I I I I I f I I I I I I I I---I--I" I---I+I I H/A I Ch i X (Diff'ocation iVoltsiDegiCh (X i-I--I--I-------------
I-----I--I---I---I Number of INDICATIONS Selected from Current Outage: 5 Huber of TUBES Selected from Current Outage: 4
COMPONENT: S/G C CUMMULATIVE DISTRIBUTION
SUMMARY
TURKEY POINT 4 10/88 Page: 1 of 1 Date: 04/17/89 Time: 1:58 PM Examination Dates: 10/27/8&thru 11/15/88 Total Number of Tubes Inspected.....: Zgpg Total Indications Between 204 and 394 Greater than or equal to 40%Total Tubes Plugged as Preventive Maint Total Tubes Plugged Location Of Indications 204 to 100%5 0 0 0 Hot Leg TSH-.5 to 01H-2 01H-2.0 to 06H+2 06H+2.1 to AV1-3 AV1-3.0 to AV4-3~1~.0~1~~0 0 0 Cold Leg TSC-.5 to 01C-2.1 01C-2.0 to 06C+2.0 06C+2.1 to AV4-3.1 0 3 0 Y?
CUMMULAT I VE EXAMINATION REPORT TURKEY POINT 4 OUTAGE: 10/88 CONPOHEHT: S/G C OESCRIPTIOH:
20K TO 100K" Page: 1 of 1 Date: 4/17/89 Time: 3:06 PM I I Extent IRovIColILegIReqITst/HoteI Reel I---I---I---I---I-I I 171 161 H ITECITEC PSIOOSCH I 381 221 H ITECITEC SSIOOBCH I 261 371 H ITECITEC PSI016CH 431 481 H ITECITEC PS1023CH I 171 731 H ITECITEC PSI036CH I-" I---I---I---I-I Probe I 1720.SF/RM 1720-SF/RM 1720-SF/RM 1720.SF/RM 1720 SF/RM I 105H 47.3 IOSC 38.5 105C 31.2 106C-.6 IAV2 2.1 I I.711471 11 351 I I.611571 11 271 I I.511591 11 241 I I.811301M 11 301 I.91125 1M 11 241 I----I----I--I---I---I---I I I I I I I I I I I I I I I I I I I I I I I I I I I 10/88 I I H/A I I.ocation IvoltsIDegIch I X IDiff I I.ocation IvoltsIDegIch I X, I I I I I I I I-I I I I.I Huaber of IHDICATIOHS Selected from Current Outage: 5 Hwher of TUBES Selected from Current Outage: 5 CUHHULAT I VE EXAHI NATION REPORT TURKEY POINT 4 OUTAGE: 10/88 COHPONENT: S/G C DESCRIPTION:
20X TO 39X-Page: 1 of 1 Date: 4/17/89 Time: 3:07 PH I I Extent IRowlCollLeglReqlTst/Hotel Reel I-I--I--I"-I I I 171 161 H ITECITEC PSIOOSCH I 381 221 H ITECITEC SSIOOBCH I 261 371 H ITECITEC PS1016CH I 431 481 H ITECITEC PSI023CH I 171 731 H ITECITEC PSI036CH I--I--I" I---I I Probe I 1720-SF/RH 1720 SF/RH 1720-SF/RH 1720.SF/RH 1720 SF/RH I I Location I IOSH 47.3 IDSC 38'IOSC 31.2 106C-.6 IAV2 2.1 I+10/88 I I N/A I IVoltslDeglCh I X IDiffl Location IVoltslgeglch I X I I I I I-I--I----------.I----I---I---I-.-I I.711471 11 351 I I I I I I I 611571 11 271 I I I I I I I.511591 11 241 I I I I I I I.81130IH 11 301 I I I I I I I.91125 IH 11 241 I I I I I I I---I"-I---I---I----I--------------
I---" I---I---I--I Nunber'of INDICATIONS Selected from Current Outage: 5 Number of TUBES Selected from Current Outage: 5 ATTACHMENT 3 FORM NIS-1 OWNER<S DATA REPORT FOR INSERVICE INSPECTIONS/
UNIT 4 CYCLE 12 REFUELING OUTAGE
'I kg t4 FORM NIS-1 OWNERS'ATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules Page 1 of 21 l.Owner: Florida Power and Light Company, 700 Universe Blvd.Juno Beach Florida 33408 (Name and Address of Owner)2.Plant: TURKEY POINT NUCLEAR POWER PLANT, P.O.BOX 3088, FLORIDA CITY FLORIDA 33034 (Name and address of Plant)3~4~5.6.7.Plant Unit: 4 Owner Certificate of Authorization (if required)Commercial Service Date: Se tember 7 1973 National Board Number for Unit:~N A Components Inspected:
~NA COMPONENT OR APPURTENANCE MANUFACTURER MANUFACTURER OR INSTALLER OR INSTALLER SERIAL NO.STATE OR PROVINCE NUMBER NATIONAL BOARD NUMBER Reactor Pressure Vessel Babcock and Wilcox 610-0116 4PSRV1 N/A N-161 Pressurizer Westinghouse HTPT-0021 N/A N-68-1 Steam Generator Westinghouse 16A-6341-1 FSGT-2991 4E210A N/A N-772 Steam Generator Westinghouse 16A-6341-2 FSGT-2991 4E210B N/A N-774 Steam Generator Westinghouse 16A-6341-3 FSGT-2993 4E210C N/A N-776 Pressurizer Westinghouse HTPT-0021 N/A N-68-1 RCS Piping PRZ, Piping Bechtel Bechtel N/A N/A N/A N/A N/A N/A Aux Spray Piping Bechtel N/A N/A N/A RHR Piping SIS Piping Bechtel Bechtel N/A N/A N/A N/A N/A N/A Boron Inj.Pipe Bechtel N/A N/A N/A
NIS-1 REPORT CONTINUED PAGE 2 OF 21 8.EXAMINATION DATES: SEPTEMBER 17 1988 TO JUNE 11 1989 9.INSPECTION INTERVAL: FROM A ril 15 1984 TO A ril 14 1994 INSPECTION PERIOD: FROM A ril 15 1987 TO A ril 14 1991 10.ABSTRACT OF EXAMINATIONS AND STATEMENT CONCERNING STATUS OF WORK REQUIRED FOR CURRENT INTERVAL: The Inservice Examinations (ISI)of selected Class 1 and 2 components of Florida Power and Light Company's (FPL)Turkey Point Plant, Unit No.4 (PTN-4), was performed during the refueling outage which began on September 17, 1988.These examinations constitute the FIRST OUTAGE of the SECOND INSPECTION Period, of the SECOND TEN YEAR INSERVICE INSPECTION INTERVAL of commercial operation.
Components were selected and examined in accordance with the Turkey Point Long-Term Inspection Plan.This plan meets the requirements of Section XI of the American Society of Mechanical Engineers (ASME)Boiler and Pressure Vessel Code,"Rules for Inservice Inspection of Nuclear Power Plant Components," 1980 Edition with Addenda through Winter 1981.The number of examinations required by the Code to date have been met for the current interval.Manual Ultrasonic, Liquid Penetrant., Magnetic Particle and Visual techniques were used in the performance of the ISI examinations.
Remote Visual examination techniques were employed by Westinghouse Electric during this outage.10.1 EDDY CURRENT EXAMINATIONS Eddy Current examination techniques were used in the examination of tubes on Steam Generators 4A, 4B, and 4C.The extent and frequency meets or exceeds the requirements of Plant Technical Specifications.
The examination activity can be found on Form NIS-BB,"OWNERS'EPORT FOR EDDY CURRENT EXAMINATION RESULTS".10.2 COMPONENT EXAMINATIONS PERFORMED Representative samples of the following components and areas were examined with nondestructive examination (NDE)techniques.
'ft)Ir)
NIS-1 REPORT 10.2.1 CONTINUED VESSELS PAGE 3 OF 21 REACTOR PRESSURE VESSEL STEAM GENERATOR<<A STEAM GENERATOR trB STEAM GENERATOR tt Crr PRESSURIZER REACTOR COOLANT PUMP REACTOR COOLANT PUMP ttB REACTOR COOLANT PUMP<<C<<REGENERATIVE HEAT EXCHANGER RESIDUAL HEAT EXCHANGER EXCESS LETDOWN HEAT EXCHANGER 4 PSRV1 4E210A 4E210B 4E210C 4T200 4P200A 4P200B 4P200C 4E200 4E206 4E202 10.2.2 CLASS 1 SYSTEMS REACTOR COOLANT 3 1 t'-RCS-14 0 1 29>>-RCS-1404 31<<-RCS-1402 29<<-RCS-1405 27.5>>-RCS-1406 27 5<<-RCS-1409 14>>-RC-1401 12>>-RC-1401 4<<-RC-1401 4>>-RC-1402 4<<-RC-1403 4<<-RC-1404 4<<-RC-1405
'4<<-RC-1406 2rr RC 1403 2>>-RC-1410 CHEMICAL 6 VOLUME CONTROL 3<<-CH-1401 3>>-CH-1402 3<<-CH-1403 2<<-CH-1401 2>>-CH-1403 2>>-CH-1404 2<<-CH-1405 2>>-CH-1402 2<<-CH-1406 2<<-CH-1407 2>>-CH-1408 SAFETY INJECTION 10>>-SI-1401 10<<-SI-1402 10>>-SI-1403 2>>-SI-1401 2<<-SI-1402 2tt-SI-1403 2>>-SI-1405 2>>-SI-1406 RESIDUAL HEAT REMOVAL 14rt RHR 1401 8"-RHR-14 04 8>>-RHR-1404 NIS-1 REPORT CONTINUED PAGE 4 OF 21 10.2.3 CLASS 2 SYSTEMS MAIN STEAM 26r'-MSA-2401 31n-MSB-2402 26n-MSB-2402 26n-MSC-2403 26<<-MSA-2404 26n-MSB-2405 26n-MSC-2406 12n-MSA-2402 12n-MSA-2401 12n-MSB-2403 6n-MSA-2401 6n-MSB-2402 FEEDWATER 18n-FWA-2401 14n-FWA-2401 18n-FWB-2402 14n-FWB-2402 14n-FWC-2403 6't-FWC-2403 SAFETY INJECTION 16n-SI-2401 lpn-SI-2401 lpn-SI-2403 10n-SI-2407 lpn-SI-2406 8'r-SI-2402 8n-SI-2404 8rt SI 2405 8't-SI-2406 8n-SI-2'407 8 n-SI-2409 6n-SI-2401 6n-SI-2403 RESIDUAL HEAT REMOVAL 14n-RHR-2401 14n-RHR-2403 14n-RHR-2404 14n-RHR-2406 12n-RHR-2401 12n-RHR-2402 10n-RHR-2401 10n-RHR-2402 10n-RHR-2403 8n-RHR-2403 8tr RHR 2404 CTMT SPRAY BLOWDOWN 6n-CS-2401 6't CS 2403 6n-BDB-2402 6rr BDA 2404 6n-BDB-2405 C'gr 1 6 V NIS-1 REPORT CONTINUED 10.3 Reports from other organizations.
REPORT NUMBER ORGANIZATION MCI-PTN-004-88-08 FPL MCI PAGE 5 OF 21 DESCRIPTION OF SERVICE FINAL REPORT OF ISI, NDE EXAMINATIONS OF UNISOLABLE PIPING SYSTEM AND COMPONENTS FOR POTENTIAL THERMAL STRESS EFFECTS.NRC BULLETIN NO.88-08 0857b/90688:50-1 WESTINGHOUSE 4 0-MONTH IS I EXAMINATION REPORT FOR REACTOR VESSEL INTERNALS MCI-ECT-88-2 FPL MCI FINAL REPORT FOR EDDY CURRENT EXAMINATIONS OF STEAM GENERATOR TUBES P.O.B88950-90232 QUALTEC TESTING" SNUBBER INSPECTION AND SERVICES, INC.FUNCTIONAL TESTING FPL-89-796 WESTINGHOUSE FLORIDA POWER AND LXGHT COMPANY TURKEY POINT UNIT 4 RCP FLYWHEEL ISI REPORT 11.0 ABSTRACT OF CONDITIONS NOTED ll.1 CLASS 1 ZONE 1 REACTOR PRESSURE VESSEL 4PSRV1 The RPV Interior and 33-1/3~of the vessel ligaments was examined.Remote Visual Examination of the Reactor Vessel Interior was performed by Westinghouse Electric Corporation.
The examinations were limited to the code category B-N-1 areas accessible during the refueling, and selected areas classified as B-N-3.These examinations showed no recordable indications.
Further details of the examination activity can be found in the Westinghouse Final Report, Document No.0857b/90688:50-1 i l I'I ,l NIS-1 REPORT CONTINUED ZONE 2 CLOSURE HEAD 4PSRV1 PAGE 6 OF 21 The RPV Closure Head Studs, Nuts, and Large and Small Washers were rescheduled for the next refueling outage.One (1)Closure Head Stud, Nut, and Small and Large Washer was replaced during this outage.Stud No.50 was replaced under NCR-C-0578-88.
During stud detensioning by Westinghouse, Stud no.4-CH-S50 turned out with the tensioner device.The stud tensioner was disassembled and it was found the tensioner engaging nut was still threaded on the stud and could not be turned off.FPL replaced stud no.50 with stud no.50R.MCI performed a baseline examination on the new stud, nut, and washers.ZONE 4 STEAM GENERATOR"B" 4E210B The Head to Tube Sheet weld, and the inlet and outlet nozzle inside radius sections were examined with Ultrasonics.
The inlet and outlet manway bolting were Visually examined.Nicked and damaged threads were found.The affected bolting was subsequently replaced.ZONE 6 PRESSURIZER 4E200 The Upper Shell to Head and Upper Shell longitudinal seam welds, and the surge nozzle, spray nozzle, and 2 safety nozzle inner radius sections were volumetrically examined.There were no recordable indications.
BALANCE OF PLANT PIPING SYSTEMS The areas listed below were examined with one or more of the following NDE methods: Visual, Ultrasonic, Magnetic Particle, and Liquid Penetrant methods.ZONE NO.SYSTEM RESULTS 7 8 10 11 12 15 16 17 18 19 20 21 22 RCS LOOP A RCS LOOP A RCS LOOP B RCS LOOP B RCS LOOP B RCS LOOP C PRZ.SURGE PRZ.SAFETY PRZ.SAFETY PRZ.SAFETY PRZ.SPRAY PRZ.SPRAY PRZ.RELIEF NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS ROOT GEOMETRY NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS ROOT GEOMETRY I D g ROOT g AND BEAM REDIRECTION NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS SUPPORT HAD INCORRECT PARTS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS hu NIS-1 REPORT CONTINUED PAGE 7 OF 21 28 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 LOOP C DRAIN AUX.SPRAY RHR LOOP A RHR/SI LOOP A RHR/S IS RHR/S I LOOP C BORON INZ.A BORON INZ.B BORON INJ.C HPSI LOOP A HPSI LOOP B CH LOOP C CH LOOP A CH LOOP C LETDOWN LINE CVCS CVCS CVCS CVCS SEAL LEAKOFF A SEAL LEAKOFF B SEAL LEAKOFF C RC PUMP A RC PUMP B RC PUMP C REGEN HT EXCH NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS DAMAGED THREAD ON VALVEg ID~ROOT SURFACE RUST ON BOLTING, COUNTERBORE AND ROOT GEOMETRY I NADEQUATE THREAD ENGAGEMENT
~BEAM REDIRECTION
~SPOT INDI CATION g XD GEOMETRY THREAD DAMAGE ON BOLTING'EAM REDIRECTION'OUNTERBORE AND ROOT GEOMETRY NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATXONS LINEAR INDICATION NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS BORXC ACID RESIDUE NO RECORDABLE INDICATIONS NO RECORDABLE XNDICATIONS NO RECORDABLE INDICATIONS CHIPPED CONCRETED FLAKING PAINT CHIPPED CONCRETE, FLAKING PAINT CHIPPED CONCRETE, FLAKING PAINT BORIC ACID RESIDUE 11.2 CLASS 2 ZONE 61 STEAM GENERATOR B The Tube Sheet to Ring, Ring to Lower Shell, Transition to Upper Shell, Feedwater Nozzle to Shell, and the steam nozzle to head welds, and the feedwater nozzle inner radius were examined.One (1)recordable indication was noted, and was determined to be slag.This indication was verified against the baseline exam.Two (2)geometric indications were noted and determined-to be caused by inside surface noise.
s k4'ii)C il, NIS-1 REPORT CONTINUED PAGE 8 OF 2 1 BALANCE OF PLANT PIPING SYSTEMS ZONE NO., 63 64 65 67 68 69 70 71 72 75 76 77 78 80 81 82 84 86 87 88 89 91 92 94 95 97 99 100 101 102 103 105 106 108 109 111 113 115 117 119 SYSTEM RHR LOOP A RHR LOOP B RHR RHR RHR RHR RHR RHR RHR RHR RHR SIS LPSI LPSI LPSI LPSI LPSI LPSI LPSI LPSI LPSI LPSI SI LOOP C SI CTMT SPRAY SI MS LOOP A MS LOOP B MS LOOP C MS LOOP A MS LOOP B BLOWDOWN A BLOWDOWN B BLOWDOWN A BLOWDOWN B MFW LOOP A MFW LOOP B MFW LOOP C FW BYPASS B RESID HT EXCH'X LET HT EXCH RESULTS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS NO RECORDABLE INDXCATIONS NO RECORDABLE INDICATIONS BORIC ACID RESIDUE CORROSION CORROSION NO RECORDABLE INDICATIONS NO RECORDABLE INDICATXONS NO RECORDABLE INDICATIONS GRINDING MARKS COUNTERBORE GEOMETRY NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS COUNTERBORE AND ROOT GEOMETRY BEAM REDIRECTION NO RECORDABLE INDICATIONS NO RECORDABLE INDICATXONS COUNTERBORE AND ROOT GEOMETRY, AND A SPOT INDICATXON NO RECORDABLE INDICATIONS NO RECORDABLE XNDICATIONS CORROSION NO RECORDABLE INDICATIONS NO RECORDABLE INDXCATIONS LOOSE HARDWARE LINEAR'ORGING ANOMALIE i I D GEOMETRY NO RECORDABLE XNDICATIONS LINEARSI FORGING ANOMALIES'POT I ND I CAT I ON i SLAG INDX CATXON i ROOT AND COUNTERBORE GEOMETRY ROOT AND I D GEOMETRY i SLAG I BASE METAL STRINGERI LINEAR XNDICATION CH I PPED CONCRETE I ACCEPTABLE ROOT AND ID GEOMETRY ROOT GEOMETRY LINEAR AND ROOT GEOMETRY COUNTERBOREi ROOTI AND CHILL RING GEOMETRYi LINEAR'ND SLAG ROOT AND CHILL RING GEOMETRY, LINEARS, AND GOUGE ROOTS COUNTERBOREi AND ID GEOMETRYI LINEARS NO RECORDABLE INDICATIONS NO RECORDABLE INDICATIONS COUNTERBORE AND ROOT GEOMETRY g~V I NIS-1 REPORT CONTINUED PAGE 9 OF 21 11.3 USNRC REGULATORY BULLETIN 88-08 EXAMINATIONS AUXILIARY SPRAY LINE ZONE 035~2 RC 1410 33 J VALVE 4 3 13 PIPE A liquid penetrant and ultrasonic examination using 45'nd 70'earch units.One (1)indication recorded with an amplitude less than 20%DAC, determined to be beam redirection.
2~ZONE 035, 2>>-RC-1410-34, PIPE-REDUCING TEE A liquid penetrant and ultrasonic examination using 45'nd 70'earch units.NO RECORDABLE INDICATIONS NOTED CHARGING LINE LOOP C ZONE 045~3 CH 1401 32 g PIPE ELBOW A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED 2~ZONE 045, ELBOW BASE METAL: A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED 3.4.ZONE 045 3 CH 1401 33 g ELBOW PIPE A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.Two (2)GEOMETRIC INDICATIONS were noted and determined to be root geometry.ZONE 045, PIPE BASE METAL: A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED 5.6.ZONE 045 3'H 1401 34i PIPE ELBOW-A liquid penetrant and ultrasonic examination using a 45 and 60'earch units.Two (2)GEOMETRIC INDICATIONS were noted and determined to be root geometry.ZONE 045 g ELBOW BASE METAL A liquid penetrant and ultrasonic examination using a 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED I QP k NIS-1 REPORT CONTINUED PAGE 10 OF 21 7.ZONE 045 J 3 CH 140 1 35 g ELBOW PIPE A liquid penetrant and ultrasonic examination using 45 and 60'earch units.NO RECORDABLE INDICATIONS NOTED 8., ZONE 045, PIPE BASE METAL: A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED 9.ZONE 045/3 CH 1401 36'IPE ELBOW A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED 1 0~ZONE 045 g ELBOW BASE METAL A liquid penetrant and ultrasonic examination using 45 and 60 search units.NO RECORDABLE INDICATIONS NOTED 1 1 ZONE 045 g 3 CH 1401 37~ELBOW PIPE A liquid penetrant and ultrasonic examination using 45'nd 60'earch units.NO RECORDABLE INDICATIONS NOTED 11.4 SNUBBER EXAMINATIONS AND TESTS Visual (VT-3)examinations were conducted over the entire population of the subject mechanical snubbers.FPL opted to exercise each mechanical snubber through its full range of travel to detect'binding, lockup, or total absence of restraining action.In accordance with plant technical specifications and ASME Section XI, a minimum of 10%of the snubber population was functionally tested.Additional details are documented in the QualTec Testing Services Final Report,"SNUBBER INSPECTION AND FUNCTIONAL TESTING", WO 47030.11.5 CLASS 1 SYSTEM LEAKAGE TESTS The system leakage tests and visual (VT-2)examinations of Class 1 systems was performed by FPL Backf it Construction during the RCS over pressure test.NO LEAKAGE WAS NOTED.
I\I t 4 0~f t NIS-1 REPORT CONTINUED PAGE 11 OF 2 1 12.0 ABSTRACT OF CORRECTIVE MEASURES RECOMMENDED AND TAKEN Described below are those examinations that identified conditions determined by the Codes and Programs Group to require Plant evaluation, disposition, and possible corrective action.12.1 Indications were evaluated in accordance with the requirements of the ASME Boiler and Pressure Vessel Code,Section XI (where acceptance criteria exists).Indications exceeding the acceptance criteria were included in a Customer Notification Report and submitted to the Plant for processing through engineering for evaluation, disposition, and corrective action in accordance with plant procedures.
CNF 88-017R 88-019 88-020 ISSUED/CLOSED 9/14/88 11/8/88 9/21/88 4/4/89 9/2 1/884 6/14/89 9/2 8/88 4/4/89 DATA SHEET/COMPONENT ID/ACTION TAKEN 4~3 66 g SUPPORT SR 667/VERI FY SETTINGS Plant determined that the recorded setting was within+5%of Design Load.Condition is acceptable.
4.3-70, SUPPORT 4-SR-616, VERIFY SETTINGS NCR-89-0123 issued for Nuclear Engineering Evaluation, noted condition would not result in a failure;Corrective action, readjust spring to design criteria;Plant Work Order (PWO)4 WA890320164616 issued for performance of corrective action.Readjusted spring to cold load of 10245;Reexamined 3/22/89, data sheet NDE 4.3-89-637 acceptable.
~3 69'UPPORT SR 643i VERIFY SETTINGS PWO issued.Will be reset during next outage.Acceptable until that time.Examination will be rescheduled for examination during the next outage.4~3 73~SUPPORT SR 635 i VERIFY SETTINGS NCR 89-0129 issued for Engineering evaluation:
condition would not result in a failure, maintenance item;readjust cold load to design criteria.PWO WA890320165445 issued for corrective action.Readjusted spring to cold load of 1695;Reexamined on 3/22/89.Acceptable.
I W~.
NIS-1 REPORT CONTINUED PAGE 12 OF 21 88-022 88-023 88-024 9/2 6/88 6/14/89 9/28/88 6/14/89 9/28/88 4/26/89 9/28/88 4/18/89 4~3 3 6 g SUPPORT WR 1 8 B g LOOSE BOLTS g CE I LING ATTACHMENT PULLED AWAY.NCR-1247-86 issued.Acceptable as-is but will be restored to original design specification at next refuel outage.Examination will be rescheduled for next outage.4~3 74 g SUPPORT'4 ACH 1 88 g LOOSE LOCK NUT g VERIFY SETTXNGS.PWO issued to tighten lock nuts and restamp cold setting on load plate.Acceptable.
4~3 75~SUPPORT 4 ACH 1 93 g VERI FY SETTINGS NCR-89-0127 issued for Nuclear Engineering evaluation.
Noted condition would not result in a failure.Corrective action: clean load scales, check hot and cold load markings, restamp if necessary.
PWO WA890314140805 issued for corrective action.Cleaned load scale, restamped settings.Acceptable.
4~3 76 g SUPPORT 4 ACH 205 g VERIFY SETTXNGS Plant issued NCR-88-0210, Transferred to NCR-N-89-0031, Corrective action: reset spring can to its cold load of 4400 pounds.RESCHEDULE EXAM FOR NEXT OUTAGE 88-025 88-026 9/28/88 4/18/89 9/28/88 3/28/89 4~3 77 g SUPPORT 4 ACH 1 90 f VERI FY SETTINGS Engineering review states that the settings are within the acceptable range.Accept as-is.4.3-86, SUPPORT H-341-17, XNADEQUATE THREAD ENGAGEMENT.
Process sheet 87-064 issued to adjust bolts to meet complete thread engagement criteria.88-027 88-028 9/28/88 4/18/89 9/28/88 6/5/89 4 3 82 g SUPPORT H 3 24 1 8 g INADEQUATE THREAD ENGAGEMENT AND VERIFY SETTINGS NCR-88-0160 issued, transferred to NCR-N-89-0323, corrective action;correct cold setting indication on load plate.Adjust spring can to cold load of 229 pounds.Reexamined on 3/10/89.Acceptable.
4~3 89 g SUPPORT 4 CSTH 1 4/BENT RODS NCR-N-89-0037 issued.Rod replaced.Acceptable.88-029 9/2 8/88 3/28/89 4.3-91, SUPPORT 4-CSTH-37, ENGAGEMENT.
P.S.89-064 bolts to meet complete criteria.INADEQUATE THREAD issued to readjust thread engagement
'g'\I 1 f t!41'4~r I$0 Ae' t NIS-1 REPORT 88-030 10/8/88 6/14/89 CONTINUED PAGE 13 OF 2 1 4~3 95 g SUPPORT SR 927 i VERI FY SETTINGS NCR-N-89-0125 issued.Work will be performed during future outage.Examination will be rescheduled for next outage.88-031 88-032 88-033 10/8/88 6/13/89 10/21/88 1/24/89 10/2 0/88 3/10/89 Not a Section XI CNF.4~3 1 04 i SUPPORT PS 3 g BORI C AC I D ON BOLTS AND NUTS, GAP BETWEEN BASE PLATE AND WALL Plant issued NCR-C-0593-88.
Boric acid was cleaned off of support.Per engineering evaluation, the gap between the base plate and wall is acceptable as-is.3~3 272 i WELD g 2 CH 1402 2 1 i LINEAR INDICATION.
Plant issued NCR-88-0161, Transferred to Construction under NCR-N-89-0062.
Indication removed by light grinding.Removal of indication verified by PT examination.88-034 10/24/88 3/29/89 88-035 10/21/88 6/14/89 4~3 1 1 0 g SUPPORT SR 942/PIPE CLAMP SLI PPING NCR-N-89-0146 issued for corrective action.Support repaired.Examination will be rescheduled for exam next outage.4~3 1 1 2 i SUPPORT 4 RCH 3 6X i VERI FY SETTINGS NCR-N-89-0124 issued.Spring can will be reset during future outage.Examination will be rescheduled next outage.88-036 1 0/2 1/884~1 58 g VALVE 4 750 i DAMAGED THREAD 3/9/89 Engineering corrective action was maintenance is to replace the affected stud during the next convenient maintenance opportunity.
Examination will be rescheduled for the next outage.88-037 10/27/88 3/29/89 2~2 44 i WELD g 3 1 MSB 2402 1Ai FORGING ANOMALY NCR-N-89-0040 issued to repair numerous indications by light grinding.Indication removal verified by MT examination.
0 pit g'1 g 0 NIS-1 REPORT CONTINUED PAGE 14 OF 2 1 88-038 88-039 88-040 88-041 88-042 88-043 88-044 88-045 88-046 10/28/88 3/28/89 11/2/88 5/2/89 11/8/88 1/11/89 11/8/88 7/28/89 11/8/88 5/2/89 11/8/88 5/2/89 11/8/88, 3/9/89 11/8/88 3/9/89 11/8/88 3/10/89 4.3-114 g SUPPORT 4 SR 400 g EVIDENCE OF MOVEMENT NCR-N-89-0083 was issued for corrective action;The cracked tack welds were repaired, the spring can was readjusted to its cold load setting, a missing washer was installed.
This exam activity was a direct result of IE Notice 88-80.This support will be rescheduled for the next outage.Reexamination performed 1/27/89.M-89-469.Acceptable.
4~3 1 1 6~SUPPORT 4 FWH 4 g I NCOMPLETE THREAD ENGAGEMENT i VERI FY SETTINGS NCR-89-0039 issued to replace spring can and pipe clamp bolts.Replaced under PS89-301.4~1 63 g VALVE 4 875B~INCOMPLETE THREAD ENGAGEMENT.
Torqued bolts to 1650 ft.lbs.This corrected the thread engagement.
4~3 1 3 0 g SUPPORT SR 4 9 1/S PALLED CONCRETE NCR 89-0133 issued for corrective action.Concrete repaired.Acceptable.
2 2 59'ELD g 26 MSC 2406 3 g LINEAR INDICATION.
NCR-89-0029, removed by light grinding.Reexamined 1/10/89.Acceptable.
2~2 60 g WELD g 26 MSA 2404 1 g 5 LINEAR INDICATIONS.
NCR-N-89-0032 issued.Indication removed by light grinding.Reexamined 1/10/89.Acceptable.
2~2 61 i WELD g 14 FWA 2401 4 g 1 LINEAR INDICATION.
Plant issued NCR-N-89-0027.
Removed indication by light surface grinding, verify removal by MT examination.
Reexamined 1/11/89.Acceptable.
2~2 62 g WELD g 14 FWB 2402 5~1 LINEAR INDICATION.
Plant issued NCR-N-89-0028, removed indication by light surface'rinding and verified removal by MT examination.
Reexamined 1/11/89.Acceptable.
2~2 63 g WELD g 6 BDB 2405 FW 36Bg 1 LINEAR INDICATION.
Plant issued NCR-88-0186, removed indication by light surface grinding and verify removal by MT examination.
Reexamined 1/10/89.Acceptable.
4'll pl h I 4t NIS-1 REPORT 88-047 11/8/88 3/28/89 CONTINUED PAGE 15 OF 21 4~3 134 g SUPPORT SR 934 i BORIC ACID RESIDUE ON BASE PLATE, VERIFY SETTINGS.NCR-89-0134 issued for engineering evaluation and corrective action.These conditions determined to be acceptable as-is.88-048 88-049 88-050 88-051 88-052 88-053 88-054 88-055 11/5/88 3/9/89 11/8/88 4/4/89 11/8/88 3/2/89 11/8/88 3/28/89 11/8/88 1/11/89 11/8/88 3/2/89 11/8/88 3/30/89 11/9/88 3/2/89 4~1 71 i 70'9 i 68 i 66'ALVES 757Ci 757A 754 B i 7 57 B g AND 754A/CORRODED STUDS Plant issued various PWO's for the replacement of bolting and repacking valves.VT-2 performed after repair.Acceptable.
4~3 1 4 0 g SUPPORT 4 MSH 2 1/LOOSE NUTS i 2 CRACKED WELDS, VERIFY SETTINGS Plant issued NCR-0187, cracked welds are acceptable, settings are acceptable, NCR did not cover the loose nuts.PWO WA890315160148 issued for loose nuts, tightened, partial reexamination on 3/23/89 (only on tightened nuts).Examination will be rescheduled for the next outage.4.3-145, SUPPORT 4-CCH-7, INCOMPLETE THREAD ENGAGEMENT.
Plant issued PWO, replaced bolt with longer bolt, reexamine VT-3 on 1/6/89.Acceptable.
4'144'UPPORT 4 ACH 94/HEAVY RUST NCR-89-0130 issued for corrective action.Prior to performing the corrective action, it was noted that the support had already been cleaned.No further action was required.4.1-72 STEAM GENERATOR B INLET AND OUTLET MANWAY BOLTSi NICKED AND DAMAGED THREADS Replaced damaged studs.Acceptable.
4~1 65 g SUPPORT 4 FL 1 3 g BORIC ACI D Plant issued PWO, cleaned off boric acid, and was reexamined.
Boric Acid removal verified by VT-1 examination.
4~3 1 2 8 i SUPPORT 4 RCH 3 OA/S PALLED CONCRETE NCR-N-89-0192 issued, accepted as-is.4~3 1 62 g SUPPORT 4 SR 627 i I NCOMPLETE NUT THREAD ENGAGEMENT.
Plant issued NCR-1182-453 on 11/28/80, which accepted this condition as-is.
P, 1 J C kg Jp NIS-1 REPORT 88-056 11/11/88 3/10/89 88-057 11/11/88 3/29/89 CONTINUED PAGE 16 OF 21 2.2-75/WELD 0 14"-FWB-2402-8/
LINEAR INDICATION.
Plant issued NCR-88-0242, and NCR-N-89-0030.
Removed indication by light grinding.Verified removal by MT examination.
4 1 8 1 g VALVE CV 8 7 6A i FROZEN STUDS AND NUTS PWO WA880609073237 issued for corrective action.Cleaned valve internals, new retaining block stud and nuts were installed.
Replaced 14 valve bonnet bolts with new bolts.88-058 11/11/88 1/24/89 88-059 11/11/88 5/3/89 88-060 11/11/88 1 5/2/89 88-061 11/11/88 5/2/89 4 1 82/4~1 83~VALVE RV 4 55 1 A&B~INADEQUATE THREAD ENGAGEMENT Not Section XI, bolting is for lifting attachment.
Acceptable.
4~3 1 54/SUPPORT 4 RCH 6~INCORRECT PIN g VERI FY SETT I NGS g I NADEQUATE NUT ENGAGEMENT NCR-88-0252 and N-89-0160,'nstalled proper pin, replaced two bolts, verified settings.Acceptable.
4~3 1 63 i SUPPORT 4 ACH 53 i LOOSE U BOLT AND MISSING NUT.Support is class"D", Not Section XI, will be corrected under DEEP 89-173.4~3 1 66~REACTOR COOLANT PUMP LUG RCP A L1 L3 i LOOSE HARDWARE AND SPALLED CONCRETE NCR 88-0190 and NCR-N-89-0049 issued.Loose hardware was designed in this manner and is acceptable as-is.Spalled concrete acceptable as-is per engineering evaluation.
0 88-062 88-063 88-064 88-065 11/11/88 5/2/89 11/11/88 1/3 0/89 11/11/88 3/14/89 11/11/88 3/9/89 4~3 1 67 J REACTOR COOLANT PUMP LUG RCP B L 1 L3 LOOSE HARDWARE AND SPALLED CONCRETE NCR-N-89-0048 issued.Loose hardware was designed in this manner and is acceptable as-is.Plant performed concrete repair.Acceptable.
5~4 20 i WELD 1 0 S I 2403 4/COUNTERBORE TAPER Plant issued NCR-88-0200, determined by engineering to be acceptable as-is.4~3 1 69 i SUPPORT 4 ACH 28 i INCOMPLETE THREAD ENGAGEMENT.
NCR-N-89-0135 issued.Nuts will be tightened during future outage.Examination will be rescheduled for next outage.4~3 170 i SUPPORT B g SPALLED CONCRETE Plant performed concrete repair.Acceptable.
g~C f NIS-1 REPORT CONTINUED 88-066 PAGE 17 OF 21 11/17/88 4/18/89 VARIOUS CORROSION ON CCW Plant performed disposition and corrective action on the following supports per PS89-142, in accordance with plant procedures.
SUPPORT 4-CCH-26 4-CCH-26 4-CCH-26 4-CCH-26 4-CCH-26 4-CCH-27 4-CCH-27 4-CCH-27 4-CCH-28 4-CCH-28 4-CCH-28 4-CCH-29 4-CCH-30 4-CCH-30 4-CCH-31 4-CCH-32 4-CCH-33 4-CCH-33 4-CCH-34 4-CCH-35 4-CCH-36 4-CCH-37 4-CCH-45 4-CCH-47 4-CCH-51 4-CCH-52 4-CCH-57 4-CCH-58 4-CCH-58 4-CCH-58 4-CCH-59 4-CCH-59 4-CCH-59 4-CCH-60 4-CCH-60 4-CCH-63 4-CCH-64 4-CCH-65 4-CCH-66 4-CCH-67 IC-281-1 IC-478-1 IC-279-1 DATA SHEET 4.3-124 4.3-120 4.3-180 4.3-195 4.3-197 4.3-181 4.3-192 4.3-198 4.3-182 4.3-193 4.3-199 4.3-183 4.3-121 4.3-184 4.3-185 4.3-186 4.3-122 4.3-187 4.3-200 4.3-194 4.3-178 4.3-177 4.3-208 4.3-190 4.3-126 4.3-201 4.3-123 4.3-188 4.3-202 4.3-191 4.3-203 4.3-207 4.3-179 4.3-204 4.3-206 4.3-205 4.3-176 4'-189 4.3-196 ZONE 144 130 130 144 149 141 144 149 141 144 149 141 141 141 141 141 141 149 144 130 130 142 144 149 149 144 144 149 144 149 142 130 142 142 142 130 144 149 CONDITION CORROSION CORROSION CORROSION NEW BOLTS/PAINT NEW BOLTS/PAINT CORROSION CORROSXON CORROSION NRI NRI NRI NRI CORROSION CORROSION CORROSION CORROSION CORROSION CORROSION RUST ON PIPE RUST ON PIPE CORROSION CORROSION CORROSION CORROSION CORROSION CORROSION CORROSION CORROSION NEW PAINT CORROSION NRI NO LOCK NUT CORROSION LIGHT RUST LIGHT RUST LXGHT RUST CORROSION NRI NRI CORRECTED 2/2 1/89 2/2 1/89 2/2 1/89 2/21/89 2/21/89 N/R N/R DELETED 2/23/89 2/23/89 2/21/89 DELETED DELETED DELETED DELETED DELETED DELETED DELETED 2/21/89 2/2 1/89 2/21/89 2/21/89 2/21/89 2/21/89 2/21/89 N/R DELETED DELETED DELETED DELETED DELETED DELETED DELETED DELETED
'P%>~%VII pl 0 ge~I t NIS-1 REPORT 88-067 12/1/88 6/14/89 CONTINUED PAGE 18 OF 2 1 4~1 89 f WELD ff 14 FWB 2402 1 1 g GOUGE NCR-N-88-248 issued.Gouge was blended with base metal.Indication removal verified by MT examination.
Acceptable.88-068 88-069 12/2/88 3/2/89 12/9/88 3/28/89 CNF IS FOR UNIT 3 4~3 173&4~1 9 1 VALVE 4 875F~SURFACE PITTING AND THREAD DAMAGE.PWO WA880607112020 was issued for corrective action.Cleaned valve internals, installed new retaining block bolts, and tightened.
Replaced valve bonnet bolting.88-070 12/9/88 4/4/89 88-071 12/10/88 3/9/89 t 88-072 12/12/88 4/18/89 4~1 92 g BOLTING 2 CH 1408 FB/BORIC ACID Construction saw no evidence of boric acid, it was concluded that the flange had been cleaned off.Acceptable.
4 3 2 09 i SUPPORT SR 7 08 g I NADEQUATE THREAD ENGAGEMENT.
Initial condition identified in 1986 under MCI-NCR-86-15, NCR-254-86 issued, determined to be acceptable as-is.4~3 2 1 0 g SUPPORT 4 ACH 50~LOOSE NUT Initial condition identified in 1986 under MCI-NCR-86-18, NCR-89-0136 issued, tightened loose nuts under PWO WA890322151909:
Partial VT-3 exam performed following repair on 3-28-89, NDE 4.3-89-0678.
Examination will be rescheduled for the next outage.88-073 88-074 88-075 12/12/88 3/27/89 12/13/88 4/18/89 12/13/88 3/27/89 4~3 227~SUPPORT 4 FWH 1 6 g VERI FY SETTING Plant issued NCR-88-0250, crossed out old C&H marks and restamped to applicable locations.
Position indicator was at cold load.Reexamined on 12/9/88, NDE 4.3-227R1.
Acceptable.
4~3 228~REACTOR COOLANT PUMP LUG RCP C Ll L3 LOOSE HARDWARE.Plant issued NCR-88-0276, transferred to NCR-N-89-0047, work performed under P.S.89-017, corrective action, tighten all nuts and remove all corrosion, additional items acceptable as-is.4~3 225~SUPPORT H 420 0 1 i SPALLED CONCRETE Plant issued NCR-89-0132, determined by engineering to be acceptable as-is.
lt 0 f>
NIS-1 REPORT CONTINUED PAGE 19 OF 21 5/26/89 2~2 67 g WELD g 26 MSC 2406 4 g LINEAR 5/28/89 INDICATION.
Blended out by grinding.Indication removal verified by MT.Acceptable.
12.2 EXAMINATION AFTER REPAIRS Following repair and/or replacement, a nondestructive examination was performed, utilizing the same method of examination that.found the indication, prior to the unit return to service.12.3 ZONE 3-STEAM GENERATOR 4E210A One tube, Row 2, Column 5, was plugged for preventive maintenance reasons due to possible wear from a piece of a clamp caught in the tube.
NIS-1 REPORT CONTINUED PAGE 20 OF 21 We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Code,Section XI.OWNER: FLO ID POWER AND LIGHT COMPANY By: Date: Au ust 30 1989 CERTIF CATE OF AUTHORIZATION NO.(IF APPLICABLE):
N/A EXPIRATION DATE: N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of DADE COUNTY and employed by ARKWRIGHT MUTUAL INSURANCE COMPANY of NORWOOD, MASSACHUSETTS have inspected the components des ribed in this WNERS'ata Data Report during the period 5 to y>e///9P'nd state that to the best of m kno ledge and belief, the Owner has performed examinations and taken corrective measures described in the Owners'ata Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, and neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Date: P+<FACTORY MUTUAL SYSTEM Inspector's Sig ture COMMISSION NO.4956 (N)(I)National Board, State, Province and'NO.
't4~t (,f@p0 4 o y4 es4 NIS-1 REPORT CONTINUED PAGE 21 OF 21 SUPPLEMENTAL SHEET NIS-1 l.Owner: Florida Power and Light Company, 700 Universe Blvd.Juno Beach Florida 33408 (Name and Address of Owner)2.Plant: TURKEY POINT NUCLEAR POWER PLANT, P.O.BOX 3088, FLORIDA CITY FLORIDA 33034 (Name and address of Plant)3.4~5.6.7~Plant Unit: 4 Owner Certificate of Authorization (if required)Commercial Service Date: Se tember 7 1973 National Board Number for Unit:~N A Components Inspected:
~NA COMPONENT OR APPURTENANCE MANUFACTURER OR INSTALLER MANUFACTURER OR INSTALLER SERIAL NO.STATE OR NATIONAL PROVINCE BOARD NUMBER NUMBER HPSI Piping CH Piping Letdown Piping CVCS Piping RC Pump A RC Pump B RC Pump C Seal Leakoff Regen Ht Exch LPSI Piping CS Piping MS Piping FW Piping Blowdown Pipe Resid.Ht Exch Ex Let Ht Exch Bechtel Bechtel Bechtel Bechtel'estinghouse Westinghouse Westinghouse Bechtel Sentry Equip.Bechtel Bechtel Bechtel Bechtel Bechtel Bechtel Bechtel N/A N/A N/A N/A 5-618J713 6-618J713 4-618J713 N/A 4E200 N/A N/A N/A N/A N/A 4E206A 4E202 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4
ATTACHMENT 4 INSERVICE INSPECTION FINAL REPORT TABLES'UTAGE 1 (1988)i SECOND PERIODi SECOND INTERVAL FOR CLASS 1i 2i 3 AND 4 COMPONENTS
,l DATE: 08/31/89 VISION: 3 REACTOR PRESSURE VESSEL N TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 1 ZONE NUMBER: 001
SUMMARY
EXAMINATION AREA NUMBER IDEHT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**UPPER INTERNALS REF.DWG.NO.685J566 011703 1 THERMOCOUPLE, CONNECTIONS'UPPORT INST.58'EVEL B.H-3 VT-3 813.32 l SI-88 C C---1-23-89 AT LOCATIONS 149 AND 239 DEGREES TAPE LOCATION 41 UPPER INTERNALS REF.OWG.NO.685J760 011706 2 INSTRUMENTATION COLUMNS 58'EVEL B-N.3 VT-3 813.32 I Sl-88 C C---1 23-89 AT LOCATIONS 149 AND 239 DEGREES TAPE LOCATION 71 8-N-3 VT-3 B13.32 UPPER SUPPORT PLATE KEYWAYS HEAD 58'EVEL t UPPER INTERNALS REF.DWG.HO.685J150 i 709 3 IS I-88 1-23-89 AT LOCATIONS 165 AND 255 DEGREES: NOT ACCESSIBLE DUE TO INTERFERNCE WITH" UPPER INTERNALS STORAGE STAND: TAPE LOCATION 106 UPPER INTERNALS REF.DWG.NO.685J326'11712 4 B-N-3 VT-3 FLOW MIXER DEVICES 8 FASTHERS 813.32 58'EVEL IS l-88 C C---1-23-89 AT LOCATIONS90-180, 180-270 AHD 270-360 DEGREES AT TAPE LOCATION 115 0117'I5 5 B-H-3 Vl'-3 SUPPORT COLUMHS 8 FASTNERS 813.32 58'EVEL IS I-88 C C---1-23-89 AT LOCATIONS90-180 AND 180-270 DEGREES AT TAPE LOCATION 115 011718 6 , 8-H-3 VT-3 GUIDE TUBES (EXTERIOR ONLY)8 B13.32 FASTHERS 58'EVEL IS I-88 C C---1-23-89 AT LOCATIONS 90.180, 180.270 AND 270-360 DEGREES AT TAPE LOCATOPN 115
DATE: 08/31/89 REVISIOH: 3 REACTOR PRESSURE VESSEL TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUI'AGE I (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 2 ZONE NUHBER: 001 SUNNARY EXANIHAT ION AREA HUHBER IDENT I F ICATION ASNE SEC.XI CATGY EXAN ITEN NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G N R**CALIBRATIOH BLOCK**UPPER IHI'ERNALS REF.DWG.NO.541F639 011721 7 UPPER CORE PLATE FUEL ASSN.GUIDE PINS 58'EVEL B-N-3 VI'-3 B13.32 IS I-BB C C---1.23-89 AT LOCATIONS90-180 AND 180.270 DEGREES AT TAPE LOCATION 258 011724 8 UPPER CORE PLATE ALIGN~KEYWAYS&FASTNE 58'EVEL 8-N-3 VT-3 ISI-88 B13.32 C C---1-23-89 AT LOCATIOH 180 DEGREES AT TAPE LOCATION 299 UPPER INTERNALS REF.DMG.NO.684J865 t 011727 9 UPPER CORE PLATE 58'EVEL B-N-3 VT-3 B13.32 ISI 88 C-C--1-23-89 AT LOCATION 0-90 DEGREES (APPROX 10 DEG.362 ON TAPE MEAR NARKS OH UPPER CORE PLATE PERIPHERY)
AT 90-180, 180.270 AND 270-360 DEGREES HRI LOWER INTERNALS REF.DWG.HO.685J102 011730 10 CORE BARREL FLANGE FLOW NOZZLES 58'EVEL B.N-3 VT-3 ISI-88 B13.32 C C-..1-24-89 AT LOCATION 90;180/180-270 AND 270-360 DEGREE AT TAPE 448 LOWER INTERHALS REF.DWG.HO.8830989 011733 11 CORE BARREL 8 VESSEL HEAD ALIGN.PINS 58'EVEL B-N-3 VT-3 813.32 IS I-88 C-C--1 24.89 AT LOCATION 75 DEGREES TAPE LOCATION 431 LIGHT WEAR HARKS: AT LOCATIONS 165, 255 AND 345 DEGRESS TAPE LOCATIOH 466, 494, AND 535 HRI LOWER INTERNALS REF.DMG.HO.684J951 011736 12 FLANGE TO UPPER BARREL WELD B-N-3 VT-3 IS I-88 813.32 C C---1-24.89 AT LOCATIOHS180.270 AND 270-360 TAPE LOCATION 572 I st e<~O'I ft h DATE: 08/31/89 VISION: 3 REACTOR PRESSURE VESSEL 2ONE NUHBER: 001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATIOH TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPOHENTS N I 0 S ONGT T RSEH A E I 0 E REMARKS ASHE SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE T C G M R**CALIBRATION BLOCK"*PAGE: 3 LOWER IHTERNALS REF.DWG.NO.684J951 0'11739 13 UP BARREL-LOW BARREL MID PLANE GIRTH 58'EVEL 8-N-3 VT-3 B13.32 I S I-88 C C---1-24-89 AT LOCATION 180-270 AND 270-360 DEGREES AT TAPE 643 LOWER INTERNALS REF.DWG.NO.685J063 O'I1745 15 B.N-3 VT-3 BAFFLE BOLTS&LOCKIHG DEVICES 813.32 TOP 2 ROW 58'EVEL I S I-88 C C---1-24-89 100K EXAMINED TAPE LOCATION 749 011748 16 8-N-3 VT-3 ISI-88 LOWER CORE PLATE FOR DEBRIS 813.32 58'EVEL C C---1-23-89 AT LOCATIONS 90.180, 180-270 AND 270-360 DEGREES AT TAPE LOCATION 749 011751 17 LOWER CORE PLATE SUP CLM, BOLTIHG 58'EVEL 8-N-3 VT-3 813.32 IS l-88 C C---1-23.89 AT LOCATIONS 0.90, 90.180, 180.270 AHD 270-360 DEGREES AT TAPE LOCATION 749 011754 18 LOWER CORE PLATE INST GUIDE TUBE NUTS 58'EVEL B.N-3 VT-3 813.32 IS I-88 C C---1-23-89 AT LOCATIONS 0-90,90-180, 180-270 AND 270-360 DEGREES AT TAPE 749 LOCATION 01'1757 19 8-H-3 VT-3 LOWER CORE PLATE ACCESS COVER 813.32 BOLTIHG 58'EVEL I S I-88 C C--1.23-89 100K EXAMINED AT TAPE LOCATION 749 4~cQ 4 DATE: 08/31/89 EVISION: 3 REACTOR PRESSURE VESSEL TURKEY POINT NUCLEAR PLAN1'HIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 4 ZONE NUMBER: 001 SUHMARY EXAMINATION AREA NUMBER IDENTIFICATION ASME'EC~XI CATGY EXAH ITEM HO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REHARKS T C G M R*~CALIBRATION BLOCK**LOWER INTERNALS REF.DWG.NO.684J866 011760 20 LOWER CORE PLATE FUEL ASS GUIDE PINS 58'EVEL 8-H-3 VT-3 813.32 IS l-88 C C---1-23-89 AT LOCATIONS 0-90,90-180, 180-270 AND 270-360 AT TAPE 749 LOCATION VESSEL INTERIOR REF.DWG.NO.004-V1 011793 31 RV TO HEAD HATING SURFACE ON VESSEL 58'EVEL 8-N-1 VT-3 813.10 ISI.8 C C---1-23-89 100K EXAMINED AT TAPE LOCATION 448 796 32 RV TO HEAD MATING SURFACE ON HEAD 58'EVEL 8-H-1 VT.3 ISI-8 813.10 C C---1-24-89 EXAM PERFORHED OH REACTOR VESSEL HEAD WITH 0 RINGS IN PLACE DATE: 08/31/89 VISION: 3 RPV CLOSURE HEAD TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS N I 0 PAGE: 5 20NE NUMBER: 002
SUMMARY
EXAMINATIOH AREA NUMBER IDENT IF I CAT IOH ASHE SEC.XI CATGY EXAM I TEM'NO METHOD PROCEDURE ONGT RSEH E I 0 E REMARKS C G M R**CALIBRATIOH BLOCK**610-0116 REF.DWG.NO.004-V2 028402 4.CH-S-50R RPV STUDS 58'EVEL 8 G-1 B6.30 MT VT-1 UT 2-28.89 NDE 2.2-85 NDE 4.1-9 NDE 5.7-2 NIS-2 C C---1-11-89 BASELINE EXAMIHATION PERFORMED C--ON NE'W STUD C-C-**UT 11**REF.DWG.NO.004-V2 034152 4-CH-H-50R RPV HUTS 58'EVEL B G-1 B6.10 MT VT-1 UT 2-28.89 NDE 2.2-85 NDE 4~1-9 NDE 5.10-2 NIS-2 C C---1-11-89 BASELINE EXAHINATION COMPLE'IED C---OH NEW NUT C-C-02 4-CH-LW-50R RPV LARGE WASHERS 58'EVEL B-G-1 VT-1 86.50 2-28-89 NDE 4.1-9 NIS-2 C C---1-11-89 BASELINE EXAMINATION COMPLETED C---ON NEW WASHER 045702 4.CH-SW-50R RPV SMALL WASHERS 58'EVEL 8-G-1 VT-1 NDE 4.1-9 C C---1-11-89 BASELINE EXAMINATION COMPLETED 86.50 2-28.89 NIS-2 C---ON HEW WASHER DATE: 08/31/89 VISION: 3 STEAM GENERATOR B PRIMARY SIDE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS N I 0 PAGE: 6 ZONE NUHBER: 004
SUMMARY
EXAMINATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S 0 N G T T R S E H A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**4E210B REF.D'WG.NO.004-V9B 051700 4-SGB-Z HEAD-TO-TUBESNEET WELD B-B 82.40 UI'WRV NDE 5.1-16 UT O.MT'L NDE 5.1-16 UT 45 AX NDE 5.1-16 UI'5 CIRC NDE 5.1-16 UT 60 AX NDE 5.1-16 UT 60 CIRC NDE 5.1-16 C C---11-29 88 UT COMPLETE 2 INDICATIONS NOTED C---DETERMINED TO BE CAUSED BY ID GEOMETRY-C-FROM THE TUBE SHEET C--C-**UT-8**C-051800 4-SGB I-IRS INLET NOZZLE IR 8-D UT 45 AX NDE 5.13-4 B3.140 C C---11-30-88 UT COMPLETE: LIMITED EXAM DUE TO INSULATION SUPPORT BRACKETS AND STEAM GEHERATOR SUPPORT.**ST.GEN.MOCKUP**00 4-SGB-0 IRS OUTLET NOZZLE IR 8 D 83.140 UT 45 AX NDE 5.13-4 C---C 11-30-88 UT COMPLETE 2 INDICATIONS DETERMINED TO BE A SPOT: LIMITED EXAM DUE TO INSULATION SUPPORT BRACKETS AND STEAM GENERATOR SUPPORT.**ST.GEH~MOCKUP*>>052000 4.SGB-I (1-16)INLET MANWAY BOLTING 8-G-2 VT-1 NDE 4.1-72 B7.30 11-8-88 CNF-88-4-052 VT TS 10.1 M.88-1785 C---C 11-3-88 VT COMPLETE, BOLTS II6, 15, AND 1---C HAVE NICKED THREADS, BOLTS REPLACED C-052100 4-SGB-0 (1.16)OUTLET MANWAY BOLTING 8-G-2 VT-1 NDE 4.1-72 C---C 11-3-88 VT COMPLETE 87.30 11-8-88 CHF-88-4-052
---C VT TS 10.1 M-88-1785 C-052511 CHANNEL HEAD N/A UT 45 AX NDE 5.17-1 A---C 12-8-88 AUGMENTED EXAHINATION, ONLY CHANHEL HEAD CLAD CRACKING H/A INDICATION NO.8 NAS APPEARED TO CHANGE*lUT 9**
DATE: 08/31/89 REVISION: 3 STEAM GEHERATOR C PRIMARY SIDE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 7 ZONE WUHBER: 005 SUMHARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO HETHOO PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**4E210C REF.DWG.NO.004-V9C 053411 CHANNEL HEAD H/A CHANNEL HEAD CLAD CRACKING N/A UT 45 AX NDE 5.17-1 A--C 12-8-88 AUGMENTED EXAM, HO CHANGE IN INDICATIONS:
DOCUMEHTATIOH OF THIS EXAMINATION IS CONTROLLED BY THE NDE/INSPECI'ION GROUP AND IS NOT PART OF THIS REPORT.**U[9*4
DATE: 08/31/89 t VISION: 3 PRESSURIZER TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 8 ZONE NUHBER: 006
SUMMARY
EXAMINATION AREA NUMBER IDEHTI F ICATION ASME SEC.Xl CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**4T200 REF.DWG.NO.004-V5 053600 04-SRGN IR SURGE NOZZLE I.R.B-D UT 30 AX NDE 5.13-3 83.120 UT 60 NDE 5.13-3 C C---11-30-88 UT COMPLETE ZONE 3 AND ZONE 1: C---LIMITED EXAM DUE TO HEATER PEHETRATIONS.
- UT 8**053700 04-PCW.B SUPPORT SKIRT-TO-HEAD WELD IS OUT OF THE CODE REQUIRED EXAMINATION VOLUME, HEAD T=5'IWB-2500-14 STATES THE IWB BOUNDARY IS T (5")DOWN FROM THE ARCH OF THE SUPPORT, THE SKIRT WELD IS 10" DOWN FROM THE ARCH (NO EXAMINATION REQUIRED)00 04.PLW-2 UPPER SHELL LONG SEAM B-B 82.12 UT 0 DEG NDE 5.1-27 UT 45 AX'DE 5.1-27 UT 60 AX HDE 5.1-27 C C---1-31-89 UT COMPLETE 12" OF LONG SEAM AT C---INTERSECTION OF 04-PCW 7 C-*aUT 6m*054400 04-PCW-7 UPPER SHELL-TO-HEAD B-B 82.11 UT 0 HDE 5.1-17 UT 45 AX HDE 5.1-17 UT 45 CIRC HDE 5.1-17 UT 60 AX NDE 5.1-17 UT 60 CIRC HDE 5.1-17 C C---12-1-88 UT COMPLETE: LIMITED EXAM DUE TO C WELDED PADS'RAHCH COHHECTI ONg AND C---INACCESSABLE AREA.C-C---**UT-8*>>054600 RV-04-551A-IR SAFETY NOZZLE I.R.B.D UT 30 AX NDE 5.13-5 B3.'I20 UT 60 AX HDE 5.13-5 C C---12-6-88 UT COMPLETE C-*"UT-8**055000 RV.04-551C-IR SAFETY NOZZLE I.RE B.D UT 30 AX NDE 5.13-5 83.120 UT 60 AX HDE 5.13-5 C C---12-6-88 UT COMPLETE C-**UT-8~*
ATE: 08/31/89 VISION: 3 PRESSURIZER TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 9 ZONE NUMBER: 006
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*" 4T200 REF.DUG.HO.004 V5 055400 SP-04-1-IR SPRAY NOZZLE I.R.B.D UT 30 83.120 UT 60 HDE 5.13-6 NDE 5.13-6 C C---1-28-89 ZONE 1 AND ZONE 3 COMPLETE: C---LIMITED EXAM DUE TO RAISED LETTERS%*UT 8**
P kg K ATE: 08/31/89 VISION: 3 TURKEY POIHT HUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPOHEHTS PAGE: 10 MAIN REACTOR COOLANT PIPING LOOP A COLD LEG N I 0 ZONE NUMBER: 007 SUHMARY EXAMINATION AREA NUMBER IDENT!FICATION ASME SEC.XI CATGY EXAM ITEM HO HETHOO PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATIOH BLOCK**REF.DWG.NO.004-A1 056100 31".RCS-1401-8 ELBOW-TO-PIPE B-J 89.11 PT NDE 3.3-176 UT 45 AX HDE 5.5-5 UT 45 CIRC HDE 5.5-6 UT 45 AX HDE 5.5-7 UT 45 CIRC HDE 5.5-8 C C---10.4-88 PT COMPLETE: 10.17-88 UT 45 AX C---AND CIRC WITH UT-26 ELBOW SIDE: 10-17-88 C---UT 45 AX WITH UT-46: 10-17-88 UT 45 CIRC C---WITH UT-12 PIPE SIDE C--.<<*UT-12, UT-26, UT-46**
ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 11 MAIN REACTOR COOLANT PIPING LOOP A NOT LEG ZONE NUMBER: 008
SUMMARY
EXAMINATION AREA HUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEM A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK*" HOT LEG REF.DIJG.NO.004-A2 056900 29"-RCS-1404-4 B-F PT HDE 3.3-181 ELBN-TO-S.G.NOZZLE e5.30 Ur 45 AX HOE 5.5-1 UT 45 CIRC NDE 5.5-2 C C---"10-6-88 PT COMPLETE: 10.17-88 UT C---COMPLETE: HO EXAM UPSTREAM DUE TO THE C---NOZZLE CONFIGURATIOH
- UT 26*+
DATE: 08/31/89 VI SIGH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)i SECOND PERIODS SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 12 MAIN REACTOR COOLAHT PIPING LOOP B COLD LEG ZOHE HUMBER: 010
SUMMARY
EXAMINATION AREA NUMBER IDEN'T IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R*~CALIBRATIOH BLOCK~>>COLD LEG REF.DWG.NO.004-A4 057900 31"-RCS-1402-5 S.G.NOZZLE-TO-ELBN B-F 85.10 PT HDE 3.3-174 UT 45 CIRC HDE 5.5-11 UT 45 AX NDE 5.5-14 C C---10.4-88 PT COMPLETE: 10-15-88 UT C---COMPLETE: NO EXAM UPSTREAM DUE TO THE C---NOZZLE CONFIGURATION
- UT-26*~058000 31"-RCS-1402-6 ELBSI-TO-PIPE 8-J 89.11 Pr HDE 3.3-173 UT 45 CIRC NDE 5.5-12 UT 45 CIRC NDE 5.5-13 UT 45 AX NDE 5'-14 UI'5 AX NDE 5.5-15 C C---10-4-88 PT COMPLETE: 10-15.88 UT C---COMPLETE, ROOT GEOMETRY C-C--C-**UT-26, UT-12, UT-46~*00 31"-RCS-1402-BC-19 BRANCH CONN.(2"-RC-1402) 8-J PT 89.32 NDE 3.3-175 C C---10-4-88 PT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS'I COMPONENTS PAGE: 13 MAIN REACTOR COOLANT PIPING LOOP 8 HOT LEG ZONE NUMBER: 011
SUMMARY
EXAMIHATIOH AREA NUHBER IDEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**HOT LEG REF.DUG.HO.004-A5 059200 29"-RCS-1405-4 ELBSI-TO-S.G.NOZZLE B-J PT NDE 3.3-186 85.30 UT 45 AX NDE 5.5-3 UT 45 CIRC HDE 5.5-4 C C---10-7-88 PT COMPLETE: 10-15-88 UT C---COMPLETE: NO EXAM DOWNSTREAM DUE TO C---NOZZLE CONFIGURATION
- UT 26**
ATE: 08/31/89 ISIOH: 3 TURKEY POINI'UCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 14 MAIN REACTOR COOLANT PIPING LOOP 8 COLD LEG ZONE NUMBER: 012
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE T N I 0 ONGT RSEH E I OE CGMR REMARKS**CALIBRATION BLOCK**COLD LEG REF.DWG.NO.004-A6 059800 27.5"-RCS-1406-BC-18 8-J BRANCH CONN.(10".SI-1402) 89.31 PT NDE 3.3-247 C UT 45 CIRC HDE 5.5-9 UT 45 AX NDE 5.5-10 C-C-C-10-14-88 PT COMPLETE: 10.15-88 UT COMPLETE:HO EXAM FROM BRANCH CONNECTION SIDE DUE TO ITS CONFIGURATION
- UT-12(Ul'-46**
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IN'IERVAL CLASS 1 COMPOHEHTS PAGE: 15 MAIN REACTOR COOLANT PIPING LOOP C COLO LEG ZONE NUMBER: 015
SUMMARY
EXAMIHAT ION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*" COLO LEG REF.DWG.NO.004-A9 06'l900 V.5"-RCS-1409-12 PIPE-TO-PIPE B-J 89.11 PT NDE 3.3.336 UT 45 AX NDE 5.5-16 UT 45 CIRC NDE 5.5-16 C C---11-21-88 UT COMPLETE, ROOT GEOMETRY:-C-LIMITED EXAM UPS'TREAH DUE TO BRANCH C---CONNECTION CONFIGURATION
- UT-12)UT-46**
I e(('P gt ATE: 08/31/89 VISION: 3 PRESSURIZER SURGE LINE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 16 ZONE NUMBER: 016
SUMMARY
EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY ITEH NO EXAM METHOD N I 0 S ONGT T RSEH A E I 0 E REMARKS PROCEDURE T C G M R**CALIBRATION BLOCK**REF.DMG.NO.004-A10 062350 14"-RC-1401 NRC VI'-1 GENERAL VISUAL FOR EVIDEHCE OF 88.80 11-4-88 MOVEMEHT NDE 4.1-62 CNR-88-4-038 C---C 10-20-88 EXAMINED ENTIRE SURGE LINE(DAMAGED INSULATION IN TNO AREAS: CNF-88-4-038 ISSUED TO PLANT FOR PROCESSING IAW PLANT PROCEDURES:
062400 12"-RC-1401-1 REDUCER-TO ELBOU 8-J 89.11 PT NDE 3.3-274 UT 45 AX NDE 5.4-24 UT 45 CIRC NDE 5.4-24 UT 60 AX NDE 5.4-24 C C---10-21-88 PT COMPLETE: 10-25-88 UI'C-COMPLETE)ID GEOMETRY C-C-**UT-34**700 12"-RC-1401-4 ELBON-TO-PIPE 8-J 89.11 PT NDE 3.3-271 UT 45 AX NDE 5.4-28 UT 45 CIRC NDE 5.4-28 UT 60 AX NDE 5.4-28 C C---10.19-88 PT COMPLETE: 11-1-88 Uf-C-COMPLETE, ROOT GEOMETRY: LIMITED C---EXAMINATION DUE TO PIPE SUPPORT-C-IN'IERFERENCE
- UT 34k*062710 4-SR-400 LINEAR TYPE SUPPORT 25'.71/2" F-B F2.10 VT-3 11-4-88 11-4-88 1-24-89 VT-3 3.6-89 NDE 4.3-114 CNR-88-4-038 NCR-88.0173 HCR-N-89-0083 TS9.9.M89.469 NIS-2 C---C 10.26-88 VT-3 COMPLETE, ATTACHMENT TO--C STRUCTURE HAS INADEQUATE THREAD-C ENGAGEMENTI ALL THREE TACK IIELDS ON-C UPSTREAM END ON SADDLE ARE CRACKEDI EXAH C---SUBJECT TO NRC IN 88-80 C-062720 4-SR.400 COMPOHENT STANDARD SUPPORT 25'-71/2" F-C F3.50 VT-4 11-4-88 11-4-88 1-12-89 VT.4 NDE 4.3-114 CHR-88-4-038 NCR-88-0173 NCR-H-89-0083 TS9.9.M89-469 C---C 10 26-88 VT-4 COMPLETE RECORDED SETTING---C 1379 (EXCEEDS ACCEPTANCE CRITERIA FOR-C THESE SPRING CANS, HOT LOAD-"1916, COLO--C LOAD 1454;CNF-88-4-038 ISSUED;SUBJECT C---EXAM HRC IN 88.80, READJUSTED TO COLD LOAD ATE: 08/31/89 VISIOH: 3 PRESSURIZER SAFETY LINE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUI'AGE 1 (1 988)t SECOND PER I OO i SECOND INTERVAL CLASS 1 COMPONENI'S N I 0 PAGE: 17 ZONE NUMBER: 017
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*~REF.DWG.NO.004-A11 063300 4"-RC-1401-1A NOZZLE-TO-SAFE-EHD 8-F 85.40 PT HDE 3.3-320 UT 45 AX HDE 5.4-37 UT 45 CIRC NDE 5.4.37 UT 60 AX HDE 5.4-37 C C---11-4-88 PT COMPLETE C---12-2-88 UT COMPLETE C-C-**UT-45**063800 4"-RC-1401-5 PIPE-TO-ELBN 8-J 89.11 PT HDE 3.3-333 UT 45 AX HDE 5.4-37 UT 45 CIRC NDE 5.4-37'T 60 AX HDE 5.4-37 C C.--11-10-88 PT COMPLETE C---12-2-88 UI'OMPLETE C-C-%*UT 454*200 4"-RC-1401-9 PIPE-TO-FLANGE 8-J 89.'11 PT HDE 3.3-338 UT 45 AX NDE 5.4-37 UT 45 CIRC HDE 5.4-37 UI'0 AX HDE 5.4-37 C C---12-2-88 PT COMPLETE: 12-2-88 UT C-COMPLETE: HO EXAM DONNSTREAM OUE TO C---FLANGE CONFIGURATIOH C-**UT-45**064300 RV-4-551A VALVE BOLTING 72'0" B-G-2 87.70 VT-1 11-1'1-88 NDE 4.1-82 CHR-88-4-058 C---C 11-7-88 COMPLETE IHCCMPLETE THREAD-C ENGAGEMENT 2 NUTS OH LIFTING ATTACHMENT CNF-88-4-058 ISSUED TO PLANT FOR ACTION: DETERMINED BY PLANT MAINTENANCE NOT A OESCREPAHT COHDITIOH:
CNF CLOSED 1-24-89
'$'J B DATE: 08/31/89 VISION: 3 PRESSURIZER SAFETY LINE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 18 ZONE NUMBER: 018
SUMMARY
EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE T H I 0 ONGT RSEH E I 0 E REMARKS C G M R**CALIBRATIOH BLOCK**REF.DUG.HO.004-A12 064400 4"-RC-1402-1A NOZZLE-TO-SAFE-EHD 8-F 85.40 PT NDE 3.3-324 UT 45 AX HDE 5.4-40 UT 45 CIRC NDE 5.4-40 UT 60 AX HDE 5.4-40 C C---11-4-88 PT COMPLETE C--.12-2-88 UT COMPLETE C-C-**UT-45**064900 4"-RC-1402-5 PIPE-TO~ELBOH 8-J 89.11 PT HDE 3.3.323 UT 45 AX NDE 5.4-40 UT 45 CIRC NDE 5.4-40 UT 60 AX HDE 5.4-40 C'C---11-4-88 PT COMPLETE C---12-2-88 UT COMPLETE C-C-**UT-45*'0 RV-4-5518 VALVE BOLTIHG B-G.2 87.70 VT-1 11-11-88 HDE 4.1-83 CHR.88.4-058 C---C 11-7-88 VT COMPLETE, INADEQUATE THREAD-C EHGAGEMENT ON LIFTING ATTACHMENT, 8 STUDS&8 HUTS: DETERMINED BY PLANT MAINTENANCE TO BE AN ACCEPTABLE COND I 7 ION 4
DATE: 08/31/89 VISION: 3 PRESSURIZER SAFETY LINE TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECI'ION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPOHEHTS PAGE: 19 ZONE NUMBER: 019
SUMMARY
EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.HO.004-A13 065500 4"-RC-1403-1A NOZZLE-TO-SAFE-END 8-F 85.40 PT NDE 3.3-322 UT 45 AX HDE 5.4.38 UT 45 CIRC NDE 5.4-38 UT 60 AX NDE 5.4-38 C C---11-4-88 PT COMPLETE C---12-2-88 UT COMPLETE C-C-**UT.45*066000 4"-RC-1403-5 PIPE-TO-ELBN B J 89.11 PT HDE 3.3.321 UT 45 AX HDE 5.4-38 UT 45 CIRC HDE 5.4-38 UT 60 AX NDE 5.4-38 C C---11-4-88 PT COMPLE'IE C---12-2-88 UT COMPLETE C-C-**UT 45**
0 DATE: 08/31/89 VISION: 3 PRESSURIZER SPRAY LINE TURKEY POINT HUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUl'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 20 ZONE NUMBER: 020
SUMMARY
EXAMINATION AREA HUMBER IDENT IF I CATION ASME SEC.Xl CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHGT T RSEM A E I 0 E REMARKS T C G M R""CALIBRATION BLOCK**REF.DWG.NO.004-A14 066900 4"-RC-1404-4 PIPE-TO-ELBOW 8-J 89.11 PT NDE 3.3-332 UT 45 AX HDE 5.4-35 U1'5 CIRC NDE 5.4-35 UT 60 AX HDE 5.4-35 C C---11-5-88 PT COMPLETE C---12-1-88 UT COMPLETE SCAN LIMITATION C--C-**UT 45**068700 4"-RC-1404-22 ELBOW-TO-PIPE B-J 89.11 PT NDE 3.3-343 UT 45 AX HDE 5.4-41 UT 45 CIRC HDE 5.4-41 UT 60 AX HDE 5.4-41, C C---1-29-89 COMPLETE C-C-C-**UT 45**
I I(
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 21 PRESSURIZER SPRAY LINE FROM LOOP B SUPP.&HANGERS ZONE NUMBER: 020
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATION BLOCK**REF.DWG.NO.004-A14 069700 WR-38 BOX RESTRAINT F-C VT-3 NDE 4.3-131 C C---11-2-88 VT-3 COMPLETE F3~10 071000 4-RCH-6 SPRING SUPPORT F-C F3.10 VT-3 11-11-88 12-22-88 1.24-89 VT-3 NDE 4.3-154 CNR.88-4-059 NCR.88-0252 HCR.H-89.0160 M89.472 C---C 11-7-88 COMPLETE INCORRECT PIN C INSTALLED, SAFETY WIRE VISIBLE SIDE HO C---LOCKIHG DEVICE, RUST ON CLAMP, C---INCOMPLETE HUT ENGAGEMENT ON PIPE CLAMP C 071100 4-RCH-6 F-C F3.50 VT-3 11-11-88 12-22-88 1-24-89 VT-3 NDE 4.3-154 CHR-88-4.059 HCR-88-0252 NCR N-89 0160 M89-472 C---C 11-7-88 COMPLETE, ACCEPTANCE CRITERIA-C HL=2728 CL"-2728I RECORDED SETTING=0: C---EXCEEDS THE ACCEPTANCE CRITERIA C---CNF-88-4-059 C-DATE: 08/31/89.VISION: 3 PRESSURIZER SPRAY LINE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS N I 0 PAGE: 22 ZONE NUMBER: 021
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S 0 N G T T R S E H A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DUG.NO.004-A15 071400 4"-RC 1405-3 PIPE-TO-ELBOM 8-J 89.11 PT HDE 3.3.309 UT 45 AX HDE 5.4-36 UT 45 CIRC HDE 5.4-36 UT 60 AX NDE 5.4-36 C C---10.29.88 PT COMPLETE C---12-1-88 UT COMPLETE C-C-*AUT 45*I 072600 4"-RC-1405-FM-15 PIPE-TO-ELBSI 8-J 89.11 Pr NDE 3.3-206 UT 45 AX HDE 5.4-36 UT 45 CIRC HDE 5.4-36 UT 60 AX NDE 5.4-36 C C---10-10-88 PT COMPLETE C---12-1-88 UT COMPLETE C-C-**UT-45**200 4".RC-1405-21 PIPE TO-ELBSl 8-J B9.11 PT NDE 3.3-210 UT 45 AX NDE 5.4-36 UT 45 CIRC HDE 5.4-36 UT 60 AX NDE 5.4.36 C C---10-10.88 PT COMPLETE C--12-1-88 UT COMPLETE C-C-**UT 45**
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD~SECOHO INTERVAL CLASS 1 COMPONENTS PAGE: 23 PRESSURIZER SPRAY LINE FROM LOOP C SUPP.8 HANGERS ZONE NUMBER: 021
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSE~H A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*" REF.DWG.NO.004-A15 075700 4 RCH-36X SPRING CAN HANGER F.C VT.3 F3.10 NDE 4.3-112 C C---10-18-88 COMPLETE 075800 4-RCH-36X SPRING CAN HANGER F-C F3.50 VT-4 NDE 4.3-112 10-21-88 CNR-88.4-035 C---C 10-18-88 VT COMPLETE: CNF-88-4-035
-C ISSUED FOR SETTING OUT OF RANGE, WILL BE CORRECTED DURING FUTURE OUTAGE, ACCEPTABLE AS IS, WILL BE RESCHEDULED FOR NEXT OUTAGE DATE: 08/31/89 EVISION: 3 PRESSURIZER RELIEF LINE TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 24 ZONE NUMBER: 022
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATIOH ASHE SEC.XI CATGY ITEM NO EXAM METHOD PROCEDURE.T N I 0 ONG7 RSEH E I OE CGMR REMARKS~*CALIBRATIOH BLOCK**REF.DWG.NO.004-A16 076800 4"-RC-1406-1 SAFE-EHD-TO-ELBSI B-J 89.11 PT NDE 3.3 334 UT 45 AX NDE 5.4-39 UT 45 CIRC NDE 5.4-39 UT 60 AX NDE 5.4-39 C C.--11-11-88 PT COMPLETE C---12-2-88 UT COMPLETE C-C-**UT-45**
DATE: 08/31/89~VISION: 3 COLD LEG DRAIN LIHE LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 25 ZONE NUMBER: 028
SUMMARY
EXAMINATION AREA NUMBER IDEN'TIFICATION ASME SEC.XI CATGY ITEM HO EXAM METHOD PROCEDURE H I 0 S ON 0T T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*>>REF.DWG.NO.004-A22 084300 2".RC-1403-3 ELBSI-TO-PIPE B-J PT 89.40 NDE 3.3-298 C C---10-28-88 PT COMPLETE 084400 2"-RC;1403-4 PIPE-TO-VALVE (VSOSA)8-J PT 89.40 NDE 3.3-299 C C---10-28-88 PT COMPLETE
DATE: 08/31/89 VISION: 3 AUXILIARY SPRAY LINE TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE'I (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 26 ZONE NUMBER: 035
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-A29 110600 2"-RC-1410-24 PIPE-TO-ELBSI 8-J PT 89.40 HDE 3.3.179 C C---10-6-88 PT COMPLETE 110700 24-RC-1410-25 ELBOM-TO-PIPE 8-J PT 89.40 NDE 3.3-180 C C---10-6-88 PT COMPLETE 111500 2"-RC-1410.33 VALVE (4-313).TO.PIPE 75 I 0 II 8-J PT HDE 3.3-342 B9.2'I UT 45 AX HDE 5.19-1 UT 70 AX NDE 5.19-1 A C---1-28-89 UT COMPLETE: EXAMINED FOR NRC C---BULLETIN NO.88.08 C-%*UT 44**111600 2".RC-1410-34 PIPE-TO-RED.TEE 75'-0" 8-J PT NDE 3.3-341 e9.21 Ur 45 AX HDE 5.19-1 UI'0 AX NDE 5.19-1 A C---1-28-89 UT COMPLETE: EXAMINED FOR NRC C---BULLETIN NO.88-08 C-**UT 44%*
A DATE: 08/31/89 VISION: 3 TURKEY POINT HUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OU'TAGE 1 (1988), SECOND PERIOD, SECOND IHTERVAL CLASS 1 COMPONENTS PAGE: 27 AUXILIARY SPRAY LINE SUPPORTS AHD HANGERS ZONE NUMBER: 035
SUMMARY
EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DUG.NO.004-A29 113000 SR-927 SPRING HANGER F-C VT-3 F3.10 NDE 4.3 95 C C---10-6-88 VT COMPLETE 113100 SR-927 SPRING HANGER F-C F3.50 VT-4 10.8.88 3-8-89 HDE 4.3-95 CHR-88-4-030 NCR.89-0125 C---C 10.6-88 VT COMPLETE, CHF-88-4-030 ISSUED FOR SETTING OUT OF RANGE, IJILL BE CORRECTED DURING FUTURE OUTAGE, ACCEPTABLE AS-IS, lllLL BE RESCHEDULED FOR NEXT OUTAGE 113600 779D F-C VT-3 F3.10 HDE 4.3-96 C C---10-6-88 VT COMPLETE DATE: 08/31/89 VISION: 3 HOT LEG RHR LOOP A TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS N I 0 PAGE: 28 ZONE NUMBER: 036
SUMMARY
EXAMIHAT ION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*>>REF.DUG.NO.004-A30 115200 14"-RHR-1401-5 PIPE-TO-VALVE 4-750 B-J B9.11 PT HDE 3.3-184 UT 45 AX HDE 5.4-26 UT 45 CIRC HDE 5.4-26 UT 60 AX NDE 5.4-26 C C---10-7-88 PT COMPLETE: 10-21-88 UT-C-COMPLETE, ROOT GEOMETRY: NO EXAM C---DONNSTREAM DUE TO VALVE CONFIGURATION.
-C-**UT 30+*115500 VALVE 4-750 BOLTIHG B-G-2 87.70 VI'-1 10.21-88 NDE 4.1-58 CNR-88-4-036 C---C 10-7-88 VT COMPLETE, STUD STAMPED¹11-C HAS THREAD DAMAGE BETWEEN VALVE BODY AHD BONHET.CNF-88-4-036 ISSUED: JPNS EVALUATION MAINTENANCE TO REPLACE THE AFFECTED STUD DURING THE NEXT CONVENIENT MAINTENANCE OPPORTUNITY, M!LL BE RESCHEDULED FOR NEXT OU'IAGE 115600 14"-RHR-1401-7 PIPE-TO-PIPE 8-J 89.11 PT, NDE 3.3-185 UT 45 AX HDE 5.4-26 , UI'5 CIRC NDE 5.4-26 UT 60 AX NDE 5.4-26 C C---10-7-88 PT COMPLETE: 10.21-88 UT-C-COMPLETE, ROOT GEOMETRY C-C-*CUT 3044 DATE: 08/31/89 VISION: 3 RHR HOT LEG LOOP A SUPPORTS 8 HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988)g SECOND PERIOD~SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 29 ZONE NUMBER: 036
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 ONGT RS EH E I OE CGMR REMARKS**CALIBRATION BLOCK*~REF.DWG.NO.004-A30 116800 4-ACH-180 STRUT SUPPORT F-C VT-3 F3.10 HDE 4.3-97 C C---10.7 88 VT COMPLETE 116900 4-ACH-179 BOX RESTRAINT F-C VT-3 HDE 4.3.222 E C---12-9-88 VT COMPLETE: ADDITIONAL EXAM F3.10 117000 PS-3 BOX RESTRAINT F-C F3.10 VT.3 10.21-88 12-4-88 10-25-88 VT-3 VISUAL HDE 4.3-104 CHF-88-4-032 HCR-C.0593-88 HCR-88 0162 M88-2261 M88-2262 C---C 10-7-88 VT COMPLETE, CHF-88-4-032 ISSUED-C FOR BASE PLATE HUTS AHD BOLTS HAVING-C BORIC ACID RESIDUE (LIGHT)AHD A GAP-C BETWEEN BASE PLATE AND WALL: EHGINEERIHG
-C EVALUATION RETORQUE BOLTS: ACCEPT PER-C TELEDYNE EVALUATION LETTER 70480-2 1/7/89 C';
DATE: 08/31/89 VISION: 3 Sl&RHR LOOP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 30 ZONE NUMBER: 037
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION.ASME SEC.Xi CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHG'T T RSEM A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.HO.004-A31 117100 VALVE CV.876A VALVE INTERIOR SURFACES 8-M-2 VT-3 812.40 12-22-88 NDE 4.3.152 C C---11-7-88 COMPLETE;REPLACED RETAIHIHG MA880609073237 C---BLOCK STUDS&NUTS;NRC INFORMATION NOTICE 88.85~117200 VALVE CV-876A VALVE BOLTIHG 8-G-2 87.70 VT-1 VT-1 MT VT-1'I 1-11-88 10-24-88 NDE 4.1.60 C HDE 4.1-81 HDE 2.2-68 NDE 4.1-95 CNR-88-4-057 WA880609073237 C-C-C C-10-18-88 VT COMPLETE, EXAMINED 16 STUDS-C'AHD NUTS: 11-4-88 2 STUDS EXAMINED AUGMENTED EXAMINATIOH:
11-7-88 COMPLETELY REMOVED AHD REPLACED-C 7800 VALVE CV876E VALVE INTERIOR SURFACES 8-M-2 VT-3 812.40 MT NDE 4.3-172 NDE 2.2.80 C C---11-10-88 VT COMPLETE: 11-21-88 MT C---COMPLETE, IE NOTICE 88.85 OF RETAIHIHG BLOCK STUDS (2)117900 VALVE CV876E VALVE BOLTIHG 8-G-2 VT-1 HDE 4.1-86 C C---11-10-88 VT COMPLETE 16 STUDS&16 NUTS 87.70 118000 8"-RHR-1401-6 VALVE 4-876E-TO-PIPE 8-J 89.11 PT HDE 3.3-267 UT 45 AX NDE 5.4-21 UT 45 CIRC HDE 5.4-21 UI'0 AX HDE 5.4-21 C C---10-18-88 PT COMPLETE: 10-21-88 UT-C-COMPLETE, COUHTERBORE GEOMETRY C-C-"*UT-41*~120200 VALVE CV875A VALVE BOLTIHG B-G-2 VT-1 B7.70 NDE 4.1-59 C C--10-18-88 VT COMPLETE, EXAMINED IN PLACE 16 STUDS AND HUI'S 120500 10"-SI-1401-16 PIPE-TO-ELBN 8-J 89.11 PT HDE 3.3-245 UT 45 AX HDE 5.4-22 UT 45 CIRC NDE 5.4-22 UT 60 AX NDE 5.4-22 A C---10-13-88 PT COMPLETE: 10-22-88 UT-C-COMPLETE(ROOT GEOMETRY: EXAMINED PER C---HRC INFORMATIONAL NOTICE HO.88-01-C-**UT-27*>>
DATE: 08/31/89 cVI SIOH-Sf 8 RHR LOOP"A TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS
'AGE: 31 ZONE HUNBER: 037 SUNNARY EXAHIHATION AREA NUHBER IDENT IF ICATION ASNE SEC.XI CATGY EXAN ITEN NO HETIIOO PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REHARKS T C G II R"*CALIBRATIOH BLOCK**REF.DUG.NO.004-A31 120650 10"-SI-1401-17A ELBOM-TO-PIPE 8-J 89.11 PT NDE 3.3-246 UT 45 AX HDE 5.4-22 UT 45 CIRC NDE 5.4-22 UT 60 AX HDE 5.4.22 C C---10-13-88 PT COHPLETE: 10-22.88 Ul'C-COMPLETE, ROOT GEONETRY C-C-**UT 27ll*
e DA1'E: 08/31/89 VISIOH: 3 TURKEY POINT NUCLEAR PLANT UHIT 4 INSERVICE IHSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 32 SAFETY INJECTION LOOP A SUPPORTS S HANGERS ZONE HUMBER: 037
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**5614-H-509 REF.DWG.NO.004-A31 120800 SR-450-0 RESTRAINT (BOLTED)21'-0" F.B VT-3 F2.10 HDE 4.3-109 C C.--10.18.88 VT COMPLETE: REEXAMINATION PER IWF-2430(B) f~'~
A'TE: 08/31/89 VISION: 3 SI&RHR LOOP B TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND IH'IERVAL CLASS 1 COMPONENTS PAGE: 33 ZONE NUMBER: 038
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 ONGT RSEH E I 0 E REMARKS C G M R**CALIBRATION BLOCK**REF.OWG.NO.004-A32 121500 10"-Sl-1402-1 VALVE 4-875E-TO-ELBSl B-J 89.11 PT NDE 3.3-303 UT 45 AX NDE 5.4-30 UT 45 CIRC HDE 5.4-30 UT 60 AX HDE 5.4-30 C C---10.24-88 PT COMPLETE: 11-1-88 UT-C-COMPLETE, BEAM REDIRECTIOH TO INSIDE C---SURFACE: HO EXAM UPSTREAM DUE TO VALVE-C-CONFIGURATION
- UT-27*+122900 VALVE 4-8758 VALVE BOLTING B-G.2 87.70 VT-1 NDE 4.1-63 11-8.88 CNF-88-4.040 TS 9.9.3.2 M88-2288 C---C 11-1-88 16 NUTS AND 16 STUDS EXAMIHEDi-C INCOMPLETE THREAD ENGAGEMENT (11 EACH)C---CNF-88-4-040 ISSUED: RETORQUE BOLTS PER PC/M 88-454 100 10"-SI-1402-15 ELBSI-TO-ELBSI 8-J B9.11 PT HDE 3.3-293 UT 45 AX HDE 5.4-30 UT 45 CIRC HDE 5.4-30 UT 60 AX HDE 5.4-30 A C---10-22-88 PT COMPLETE: 11-1-88 UT-C-COMPLETE, BEAM REDIRECTIOH TO INSIDE C---SURFACE: EXAMIHEO PER HRC INFORMATIONAL
--C-NOTICE HO.88-01**UT-27"~123200 10".Sl-1402-16 ELBOM-TO-ELBSI 8-J B9.'l1 PT NDE 3.3.294 UT 45 AX HDE 5.4-30 UT 45 CIRC NDE 5.4 30 UT 60 AX NDE 5.4-30 A C---10.22.88 PT COMPLETE: 11-1-88 UT--C-COMPLETE, ID GEOMETRY: EXAMINED PER NRC C---BULLETIN 88-01-C-**UT-27~123410 VALVE 4-876B RETAINING BLOCK STUDS MT HDE 2.2-79 C C-.-11-28-88 M'I COMPLETE: 2 RETAINING BLOCK STUDS EXAMINED PER NRC IHFORMATIONAL-HOTICE NO.88-85 123500 VALVE 4-8768 BOLTING B.G-2 VT-1 87.70 HDE 4.1-94 C C---12-5.88 VT COMPLETE 9 REPLACEMENT STUDS BASELINE 124010 VALVE 4-876D RETAIHING BLOCK STUDS MT NDE 2.2-81 C C---11-21-88 MT COMPLETE: 2 RETAINIHG BLOCKS EXAMINED PER NRC INFORMATIONAL NOTICE HO.88-85 DATE: 08/31/89 VI SION: 3 Si&RHR LOOP B TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECI'ION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 34 ZONE NUMBER: 038
SUMMARY
EXAMINATION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATION BLOCK"*REF.OHG.NO.004-A32 124100 VALVE 4.876D VALVE BOLTIHG B-G-2 VT-1 B7.70 HDE 4.1-93 C C---12-5-88 VT-1 OH 15 REPLACEMENT STUDS BASELINE 124400 8"-RHR-1402-7 TEE-TO-RED.TEE 8-J B9.11 Pr NDE 3.3-297 UT 45 AX HDE 5.4.27 UT 45 CIRC NDE 5.4-27 UI'0 AX NDE 5.4-27 C C..-10-24-88 PT COMPLETE: 10-25-88 UT C.-COMPLETE, ROOT GEOMETRY: LIMITED EXAM C---DUE TO TEE CONFIGURATION
-C-**ur-41**
4f ATE: 08/31/89 VISION: 3 SI Ir RNR LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 35 20NE NUMBER: 039
SUMMARY
EXAMINATION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATION BLOCK**REF.DWG.NO.004-A33 124710 VALVE 4-876C RETAINING BLOCK STUDS MT HDE 2.2-82 C C---11-28-88 MT COMPLETE: 2 RETAINIHG BLOCK STUDS EXAMINED PER HRC INFORMATIOHAL NOTICE HO.88-85 125000 8"-RNR-1404-2 ELBOW-TO-PIPE 8 J 89.11 PT HDE 3.3-260 UT 45 AX HDE 5.4-19 UT 45 CIRC NDE 5.4-19 UT 60 AX NDE 5.4-19 C C---10-17-88 PT COMPLETE;10-21-88 UT-C-COMPLETE, COUHTERBORE, BEAM REDIRECTION, C---AND ROOT GEOMETRY-C-**UT 41*4 125300 VALVE 4-875F IHTERIOR SURFACE B.M-2 B12.40 VT-3 HDE 4.3-173 12-9.88 CNR-88-4-069 12-23-88 WA880607112020 VLA REPAIR O-CMM-062.3 C--C 11-29-88 VT-3 COMPLE'IE, SURFACE PITTING C NOTED OH SEALING SURFACE OF VALVE BODY C---AHD OH FLAPPER;CNF-88-4-069 ISSUED, PWO C---ISSUED FOR REPAIR, REPLACED RETAINIHG BLOCK STUDS 8 HUTS, EXAMINED PER NRC INFORMATIONAL NOTICE NO.88-85 125400 VALVE 4-875F VALVE BOLTING B.G-2 87.70 VT-1 12-9.88 12-23-88 VT-1 TS HDE 4.1-91 CNR-88-4-069 WA880607112020 10.1.M88-2205 C---C 11-29-88 VT COMPLETE: 2 STUDS HAD THREAD-C DAMAGE, 4 STUDS WERE STILL IN VALVE: C---VALVE STAINLESS STEELI BOLTIHG CARBON C---STEEL CNF-88.4-069 ISSUED;REPLACED STUDS AND HUTS VT-1 COMPLETE 12-17-88 BY CONSTRUCTIOH QC 125800 10".Sl-1403-4 ELBOW-TO-PIPE 8-J 89.11 PT NDE 3.3-261 UT 45 AX NDE 5.4-34 UT 45 CIRC HDE 5.4-34 UT 60 AX NDE 5.4-34" C C---10-17-88 PT COMPLETE C---11-6-88 UT COMPLETE C--C-**UT.27**126900 VALVE 4-875C VALVE BOLTING B-G-2 VT-1 87.70 NDE 4.1-64 C C---11-1-88 VT-1 COMPLETE (4
DATE: 08/31/89 VISION: 3 Sl&RNR LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPOHEHI'S PAGE: 36 ZONE HUMBER: 039
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM NO ME'THDD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATION BLOCK~*REF.DWG.NO.004-A33 127000 10"-Sl-1403-14 VALVE 4-875C TO-ELBOW 8-J 89.1'I PT NDE 3.3-262 UT 45 AX NDE 5.4-32 UT 45 CIRC NDE 5.4-32 UT 60 AX HDE 5.4-33 C C---10-17-88 PT COMPLETE: 10-24-88 UT 45 C---COMPLETE;11-2-88 UT 60 COMPLETE: HO C---EXAM UPSTREAM DUE TO VALVE CONFIGURATION
-C-**UT-27*127100 10"-Sl-1403-15 ELBOW-TO-ELBOW B-J 89.11 PT HDE 3.3-263 UT 45 AX HDE 5.4-32 UT 45 CIRC NDE 5.4-32 UT 60 AX HDE 5.4-33 C C--.10-17-88 PT COMPLETE: 10.24-88 UT 45-C-COMPLETE, COUNTERBORE AND ROOT GEOMETRYI C---11-1-88 UT 60 COMPLETE-C-~*UT-27~*00 10"-Sl-1403-16 ELBOW-TO-ELBOW 8-J 89.11 PT , NDE 3.3-264 UT 45 AX HDE 5.4-32 UT 45 CIRC HDE 5.4-32 Ul'0 AX NDE 5.4-33 A C---10-17 88 PT COMPLETE: 10-24-88 UT 45-C-COMPLETE, COUHTERBORE GEOMETRYI 11-02-88 C---UT 60 COMPLETE: EXAMINED PER NRC-C-INFORMATIONAL NOTICE HO.88-01**UT-27*
/~
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 37 SAFETY INJECTION LOOP C SUPPORTS&HANGERS N I 0 ZONE NUMBER: 039
SUMMARY
EXAMINATION AREA NUMBER IDEHT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE 0 H G T R S E H E I 0 E REMARKS C G M R**CALIBRATION BLOCK*>>5614-H-509 REF.DWG.NO.004-A33 127800 8073-H.810.01 LINEAR SUPPORT 18>.Pu F-B VT-3 F2.10 NDE 4.3.108 C C---10-18-88 VT COMPLETE 127810 8073-H-810-01 RIGID TELESCOPING STRUT 18 1 0ll F-C VT-3 F3.10 HDE 4.3-108 C C---10-18-88 VT COMPLETE 127910 8073-H.810-02 RIGID TELESCOPING STRUT pu F-C VT.3 HDE 4.3-224 C C---12-9-88 VT COMPLETE, REEXAMIHATIOH PER F3.10 IWF-2430(B)
K' TE: 08/31/89 I SION: 3 BORON INJECTION LOOP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS N I 0 PAGE: 38 ZONE NUMBER: 040
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DUG.NO.004-A34 128500 2"-Sl-1401-6 TEE-TO-PIPE B-J PT 89.40 NDE 3.3-204 C C.--10-10.88 PT COMPLETE 130400 2"-SI-1401-25 PIPE-TO COUPLIHG 8-J PT B9.40 HDE 3.3-203 C C---10.10-88 PT COMPLETE 130500 2"-Sl-1401-26 COUPLING-TO-PIPE BJ PT 89.40 NDE 3.3-209 C C---10-10-88 PT COMPLETE 0 DATE: 08/31/89 VISION: 3 BOROH INJECTION LOOP B TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONEHTS H I 0 PAGE: 39 ZONE NUMBER: 041
SUMMARY
EXAMIHATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*" REF.DWG.HO.004-A35 134100 2u-SI 1402 17 PIPE-TO-ELBOW B-J PT B9.40 HDE 3.3.335 C C;--11-22-88 PT COMPLETE OF 45 DEG BEND AREA, SOCKET ELBOW DOES NOT EXIST 134700 2"-SI-1402-23 PIPE-TO-COUPLIHG B-J PT 89.40 HDE 3.3-325 C C---, 11-2-88 PT COMPLETE 134800 2"-SI-1402-24 COUPLIHG-TO-PIPE t 8-J PT B9.40 NDE 3.3-328 C C---11-2-88 PT COMPLETE 5600 2"-Sl-1402-32 ELBOW-TO-PIPE 8-J PT 89.40 HDE 3.3-316 C C---10-22-88 PT COMPLETE ATE: 08/31/89 VISION: 3 TURKET POINT NUCLEAR PLAHT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 40 BORON INJECTION LOOP B SUPPORTS&HANGERS N I 0 ZONE NUMBER: 041
SUMMARY
EXAMIHAT ION AREA NUHBER IDENT I F ICATION ASME SEC.XI CATGY EXAH ITEM NO HETHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK*>>REF.DMG.NO.004-A35 137500 M-712A-1 STANCHION F-C VT-3 F3.10 NDE 4.3-153 C C---11-7-88 VT COMPLETE ATE: 08/31/89 VISION: 3 BORON INJECTION LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS ZONE NUMBER: 042
SUMMARY
EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY ITEM NO EXAM METHOD PROCEDURE T N I 0 ONGT RSEN E I OE CGMR REMARKS**CALIBRATION BLOCK**REF.DWG.NO.004-A36 138300 2"-Sl-1403-9 PIPE-TO-ELBN B-J PT 89.40 HDE 3.3-205 C C--10-10-88 PT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UHIT 4 IHSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 42 BORON INJECTION LOOP C SUPPORTS 8 HAHGERS ZONE NUMBER: 042
SUMMARY
EXAMIHAT ION AREA NUMBER IDEHT I F I CAT ION ASME SEC.Xi CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATION BLOCK**REF.DWG.HO.004-A36 140500 WR-18 8 BOX RESTRAINT 14'-C F3.10 VT-3 3-14-86 3-15-86 7-30.86 12-2-86 VT-3 5-15.89 HDE 4.3-36 HCR-MCI-86-23 NCR-364-86 9.1-5.1 M8114 HCR-1247-86 NDE 4.3-220 NIS.2 A---C 3-14-86 NCR-MCI-86-23 NOTED LOOSE NUTS)CONST ISSUED HCR 364 86 WAS CLOSED AHD REISSUED UNDER 1073-810+1247-86 HEED CLOSE OUT: 12.9-88 REEXAMINATION PERFORMED PER IWF-2430(B)
IN NEXT PERIOD C---COMPLETE;THIS EXAM VERIFIES CORRECTIVE ACTION WAS PERFORMED.
1'g!
DATE: 08/31/89 VISION: 3 HIGH PRESS.Sl LOOP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 43 ZONE NUHBER: 043 SUHHARY EXAHINATI ON AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM-ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-A37 141500 2"-Sl-1405-4 PIPE-TO-TEE BJ PT 89.40 NDE 3.3-273 C C---10-19-88 PT COMPLETE 143310 2"-S I-1405-22A PIPE-TO-VALVE 4-874A 8-J PT 89.40 W-88-1874 A C---BASELINE EXAM PERFORMED DUE TO REPLACEMENT OF VALVE 4-874A.143410 2"-Sl-1404-1A VALVE 4-874A-TO-PIPE t 8-J PT 89.40 W-88-1872 A C--;BASELINE EXAM DUE TO REPLACEMENT OF VALVE 4-874A.500 2"-Sl-1404-2 PIPE-TO-ELBOW BJ PT 89.40.'W.88-1875 A C---EXAM PERFORMED DUE TO REPLACEMENT OF VALVE 4-874A.
ni, ATE: 08/31/89 VISION: , 3 HPSI LOOP A SUPPORTS&HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 44 ZONE HUHBER: 043 SUHMARY EXAHINAT ION AREA NUMBER IDENT IF ICATION ASHE SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-A37 144500 MR-1 BOX RESTRAINT F-C VT-3.NDE 4.3-101 C C---10-10-88 VT COMPLETE F3.10 145100 SR-901 HANGER (SPRING CAH)F-C VT-3 M88-2474 F3.10 VT-3 M89.108 A C---EXAM PERFORMED DUE TO REPLACEHEHT OF C---VALVE 4-874A.145200 SR-901 SPRIHG CAH HANGER F-C VI'-3 F3.50 VT-3 M88-2474 M89-108 A C---EXAM PERFORMED DUE TO REPLACEMENT OF C---VALVE 4.874A.5300 SR-900 SPRING CAN HANGER F-C VT-3 F3.10 VT-3 M88-2473 M89.107 A C---EXAM PERFORMED DUE TO REPLACEMENT OF C---VALVE 4-874A.145400 SR-900 SPRING CAN HAHGER F-C VT.3 F3.50 VT.3 M88-2473 M89-107 A C---EXAM PERFORMED DUE TO REPLACEHENT OF C---VALVE 4-874A.
DATE: 08/31/89 VISION: 3 HIGH PRESS.Sl LOOP B TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 45 ZONE NUMBER: 044 SUMHARY EXAHINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEH NO HETNOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R"*CALIBRATION BLOCK**REF.DWG.NO.004-A38'l47100 2"-SI-1406-17 COUPLING-TO-PIPE 8-J PT 89.40 NDE 3.3.213 C C---10-11-88 PT COMPLETE 149400 2"-SI-1406-40 PIPE-TO-ELBOW 8-J PT 89.40 NDE 3.3-276 C C---10.20-88 PT COHPLETE DATE: 08/31/89 VISION: 3 NPSI LOOP B SUPPORTS&HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 46 ZONE NUMBER: 044
SUMMARY
EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-A38 150200 MR-5 BOX RESTRAINT F.C VT-3 NDE 4.3-102 C C---10-11-88 VT COMPLETE F3.10 i l F~5 ATE: 08/31/89 VISION: 3 CHARGE LINE RNX TO COLD LEG LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 47 ZONE NUMBER: 045
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC~XI CATGY EXAM ITEM NO HETHOD PROCEDURE N I 0 S ONGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-A39 151900 3"-CH-1401-4 PIPE-TO-TEE 8-J PT 89.21 NDE 3.3-292 C C---10-20-88 PT COMPLETE 154800 3"-CH-1401-32 PIPE-TO-ELBOW 23'-9" B-J B9.21 PT NDE 3.3-288 UT 45 AX NDE 5.4-25 UT 45 CIRC NDE 5.4-25 UT 60 AX NDE 5.4-25 A C---10-19-88 PT COMPLETE: 10-24-88 UT C-'--COMPLETE: EXAMINED PER NRC BULLETIN NO.C.--88.08 C-**UT 44**154850 ELBOW (32-33)ELBOW BASE METAL 23'-9" NRC 88.08 PT NDE 3.3.304 UT 45 AX NDE 5.4-25 UT 45 CIRC NDE 5.4.25 UT 60 AX NDE 5.4-25 A C---10-19-88 PT COMPLETE: 10-24-88 UT C---COMPLETE: EXAMINED PER NRC BULLETIN NO.C---88-08 C---**UT-44*>>154900 3"-CH-1401-33 ELBOW-TO-PIPE 23 I 9 I 1 8-J 89.21 PT NDE 3.3-287 UT 45 AX NDE 5.4-25 UT 45 CIRC NDE 5.4-25 UT 60 AX NDE 5.4-25 A C--10-19-88 PT COMPLETE: 10 24 88 Ul'C-COMPLETE(ROOT GEOMETRY: EXAMIHED PER C---HRC BULLETIN NO.88-08 C-**UT.44~*154950 PIPE (33-34)PIPE BASE METAL 23 I 9 I I NRC , PT NDE 3.3.281 88-08 UT 45 AX NDE 5.4-25 UT 45 CIRC NDE 5.4-25 UT 60 AX NDE 5.4 25 A C-.-10-19-88 PT COMPLETE: 10-24-88 UT C---COMPLETE: EXAMINED PER NRC BULLETIN NO.C---88.08 C-**UT-44**155000 3"-CH-1401-34 PIPE-TO ELBOW 23 I 9 II B-J 89.21 PT NDE 3.3-286 UT 45 AX NDE 5.4-25 UT 45 CIRC NDE 5.4.25 UT 60 AX HDE 5.4 25 A C---10.19-88 PT COMPLETE: 10 24-88 UT-C-COMPLETE, ROOT GEOMETRY: EXAHINED PER C---NRC BULI.ETIN NO.88-08-C-**UT-44**
0 TE: 08/31/89 I SION: 3 CHARGE LINE RHX TO COLD LEG LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 48 ZONE NUMBER: 045
SUMMARY
EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 OHGT RSEH E I 0 E REMARKS C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-A39 155050 ELBOW (34-35)BASE MATERIAL 23 I 9ll NRC 88-08 PT NDE 3.3-290 UT 45 AX NDE 5.4-25 UT 45 CIRC HDE 5.4-25 UT 60 AX HDE 5.4.25 A C---10-19-88 PT COMPLETE: 10.24-88 Ul'---COMPLETE: EXAMINED PER NRC BULLETIH HO.C---88-08 C-**UT-44**155100 3"-CH-1401-35 ELBOW-TO PIPE 23 I 9 II 8-J 89.21 PT NDE 3.3-285 UT 45 AX HDE 5.4-25 UT 45 CIRC NDE 5.4-25 UT 60 AX HDE 5.4-25 A C---10.19-88 PT COMPLETE: 10-24-88 UT C---COMPLETE: EXAMINED PER HRC BULLETIN NO.C---88.08 C-**UT-44**150 PIPE (35-36)PIPE BASE METAL 23 I 9 II NRC 88-08 PT NDE 3.3.291 UT 45 AX HDE 5.4.25 UT 45 CIRC HDE 5.4-25 UT 60 AX HDE 5.4-25 A C---10-19-88 PT COMPLETE: 10-24-88 UT C---COMPLETE: EXAMINED PER HRC BULLETIN HO.C---88.08 C-**UT-44**155200 3"-CH-1401-36 PIPE-TO-ELBOW 25'-J 89.21 PT NDE 3.3-284 UT 45 AX NDE 5.4-25 UT 45 CIRC NDE 5.4-25 UT 60 AX NDE 5.4-25 A C---10-19-88 PT COMPLETE: 10.24-88 UT C---COMPLETE: EXAMINED PER NRC BULLETIN NO.C---88-08 C-*iU T 44**155250 ELBOW (36-37)BASE MATERIAL 25'RC 88-08 PT NDE 3.3-289 UI'5 AX HDE 5.4-25 UT 45 CIRC NDE 5.4-25 UT 60 AX NDE 5.4-25 A C---10-19-88 PT COMPLETE: 10-24-88 UT C---COMPLETE: EXAMINED PER HRC BULLETIN NO.C---88-08 C---**UT 44%4 155300 3"-CH-1401-37 ELBOW-TO-PIPE 8-J 89.21 PT NDE 3.3-283 UT 45 AX NDE 5.4.25 UT 45 CIRC NDE 5.4 25 UT 60 AX NDE 5.4-25 A C---10-19-88 PT COMPLETE: 10-24-88 UT C---COMPLETE: EXAMINED PER HRC BULLETIN HO.C---88-08 C-**ur-44**
ATE: 08/31/89 VISION: 3 CHARGE LINE RHX TO COLO LEG LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 49 ZONE NUMBER: 045
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 ,S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-A39 155400 3"-CH-1401-38 PIPE-TO-BRANCH CONNECTION NDE 3.3 NDE 5.4 12-13-88 THIS WELD DOES NOT EXISTI VERIFIED DURING THE 1988 OUTAGE**UT 44**
DATE: 08/31/89 VISION: 3 CHARGING LINE LOOP C SUPPORTS 8 HANGERS TURKEY POINI'UCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 50 ZONE NUMBER: 045 SUMHARY EXAMINATION AREA NUHBER IDENT IF I CAT IOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATIOH BLOCK**REF.DWG.NO.004-A39 155600 SR-934 (4-VCH-3)PIPE SUPPORT WITH SPRING CAN 14'" F-C VT-3 F3.10 11.8-88 3.8-89 NDE 4.3-134 CNF-88-4-047 NCR-89.0134 C---C 10-22-88 COMPLETE BORIC ACID RESIDUE ON-C BASE PLATE;CNF-88-4-047 ISSUED FOR C--'BORIC ACID RESIDUE 8I VERIFY SPRING SETT INGS;ENGINEERING EVALUATION DETERMINED THAT THIS CONDITION IS ACCEPTABLE AS.IS 155700 SR.934 (4-VCH-3)SPRING CAN SUPPORT pw F-C F3.50 VT-4 11-8-88 3.8-89 NDE 4.3.134 CNR-88-4 047 NCR-89-0134 C C---10-22-88 COMPLETE NO LOAD PLATE-C SUBMITTED TO ENGINEERING FOR C---VERIFICATIOH OF SETTINGS JPN ENGINEERING DETERMINED THAT THE SETTIHGS ARE CORRECT ACCEPTABLE AS.IS I t,*'%It 0 TE: 08/31/89 VISION: 3 CHARGE LINE RHX TO HOT LEG LOOP A TURKEY POINT HUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COHPONEHTS N I 0 ZONE NUHBER: 046 SUHMARY EXANI HAT ION AREA HUHBER IDENT I F ICATION ASHE SEC.XI CATGY EXAN ITEN HO NETHOO PROCEDURE S ONGT T RSEH A E I 0 E RENARKS T C G N R**CALIBRATIOH BLOCK**REF.OWG.HO.004-A40 161000 3"-CH-1402-39 ELBOW-TO-PIPE 8-J PT 89.21 NDE 3.3-231 C C---10.12-88 PT COHPLETE 161100 3"-CH-1402.40-PIPE-TO-ELBOW 8-J PT 89.21 HDE 3.3 230 C C---10-12-88 PT COHPLETE 161200 3".CH.1402-41 ELBOW-TO-PIPE 8-J PT 89.21 NDE 3.3-229 C C---10-12.88 PT CONPLETE 161300 3"-CH.1402-42 PIPE.TO-ELBOW 8-J PT 89.21 HDE 3.3-228 C C---10-12-88 PT COHPLETE II l ATE: 08/31/89 VISION: 3 CHARGING LINE LOOP A SUPPORTS 8 HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPOHENTS N I 0 PAGE: 52 ZONE NUMBER: 046
SUMMARY
EXAMIHAT IOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO HETHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATIOH BLOCK~*REF.DWG.NO.004-A40 162400 WR-39 BOX RESTRAINT F-C VT-3 NDE 4.3 230 C C---12-12 88 REEXAMINED PER IWF-2430(B)
F3.10 5614-H-566 REF.DWG.NO.004-A40 162620 WR-36 BOX RESTRAINT 14'.C F3.10 1-25-89 1-25-89 1-26-89 VT-3 3-13-89 10.62-AB89.073 A NCR.89.0054 NCR.N-89.0173 9.9.M89-528 HIS-2-C-C-C-C C-1-25-89 DURIHG AS.BUILT VERIF ICATIOH SEVERAL DISCREPANCIES
'WERE IDENTIFIED (WELD IHG): THE FOLLOWIHG CONDITIONS ARE ACCEPTABLE:
'I" INCREASE IH LEHGTH THE ADDITIONAL WELDS;SPALLED CONCRETE;EXISTING GAPS FOR PIPE CLEARANCE 162650 4.VCH.10 STRUT HAHGER F.C VT-3 , NDE 4.3-223 E C--12 9-88 VT COMPLETE ADDITIONAL EXAH F3.10 162660 SR 942 BOX RESTRAINT F-C F3.10 VT-3 10-21-88 10-25-88 1.21-89 VT-3 NDE 4.3-110 CNR-88-4-034 NCR-88-0158 HCR-N-89.0146 TS9.9.M89-487 C.--C 10.18-88 COMPLETE PIPE CLAMP SLIPPING ON--C PIPE: CNF-88-4-034 ISSUED: REPAIRED IN--C ACCORDANCE WITH NCR REEXAMIHED 1-28-89-C FOLLOWING REPAIR C-
ATE: 08/31/89 VISION: 3 CKARGE LINE RHX TO VALVE CV312C TURKEY POINT NUCLEAR PLAN1'NIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONEHTS N I 0 PAGE: 53 ZONE HUMBER: 047 SUHMARY EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE S ONGT T RS EH A E I 0 E REMARKS T C G M R"*CALIBRATION BLOCK~*REF.DWG.NO.004-A41 162700 3"-CH-1403.1 VALVE (4-312C)-TO-PIPE BJ PT 89.21 NDE 3.3-310 C C---10-29-88 PT COMPLETE 163100 3"-CH-1403.5 PIPE-TO-ELBOW 8 J PT 89.21 NDE 3.3-296 C C---10-24-88 PT COMPLETE 163500 3"-CH-1403-9 PIPE-TO-ELBOW B-J PT 89.21 NDE 3.3-314 C C---11-1-88 PT COMPLETE 163600 3"-CH-1403-10 ELBOW-TO PIPE B-J PT 89.21 NDE 3.3-315'C---11-1-88 PT COMPLETE h 0 a+j ATE: 08/31/89/I SION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (198S)I SECOND PERIOD, SECOND INTERVAL CLASS 1 COHPOHENTS PAGE: 54 CHARGING LINE RHX TO CV31 C SUPPORTS 8 HANGERS N I 0 ZONE NUMBER: 047 SUHHARY EXAHINAT ION AREA NUMBER IDENT I F I CAT ION ASHE SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**5614-H-551 REF.DWG.NO.004-A41 165100 4-VCH-60 LINEAR U-BOLT RESTRAIHT 25'-3" F-8 VT-3 NDE 4.3.142 C C.--11-3-88 COMPLETE F2~10 165150 4-VCH.60 LINEAR U BOLT RESTRAINT 25 I 3 II F-C Vl'-3'DE 4.3-142 C C---11-3-88 VT COHPLETE F3.10 165400 4-VCH-63 LINEAR U.BOLT RESTRAINT 25 I 3 II F.B VT.3 F2.10 HDE 4.3-171 C C--11-10-88 VT COHPLETE 5450 4-VCH-63 LINEAR U-BOLT RESTRAINT 25 I 3ll F-C VT-3 F3.10 NDE 4.3-171 C C---11-10 88 VT COHPLETE 165800 SR-489 LINEAR BOX RESTRAINT 16'-10" F-B VT-3 F2.10 NDE 4.3-132 C C---'ll-2-88 VT COHPLETE 166000 SR-491 LIHEAR BOX RESTRAINT 16'-'10" F-8 F2.10 VI'-3 11-8-88 HDE 4.3.130 CHR-88-4-041 C---C 11-2-88 VT COMPLETE(CONCRETE AT BASE-C GROUND FLOOR CRACKED AND MISSING 166050 SR.491 LINEAR BOX RESTRAINT 16'-10" F-C VT-3 NDE 4.3-130 C---C 11-2-88 VT COMPLETE F3.10 166200 4-VCH-17 F-8 LINEAR WELDED EYE ROD SI CLAMP F2.10 22'11" 1.10.89 1-21-89 1-21-89 1-31-89 VT-3 3-13.89 10.62-AB89.020 NCR-89.0041 HCR-H-89 0147 10.23.M89.514 9.9-H89-523 HIS-2 A---C 1-21-89 THIS SUPPORT WAS HOT IHSTALLEDI
-C IDENTIFIED DURING WALKDOWHI SUPPORT WAS-C SUBSEQUENTLY INSTALLED C-C-C-DATE: 08/31/89 VISION: 3 TURKEY POINI'UCLEAR PLANI'HIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 55 CHARGING LINE RHX TO CV312C SUPPORTS 8 HANGERS ZONE HUMBER: 047
SUMMARY
EXAMIHAl'IOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OH 0T T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**5614-H-551 REF.DWG.NO.004-A41 166250 4-VCH-17 PIPE CLAMP 22'-11" F-C VT.3 F3.10 3-13-89 9.9-M89-513 NIS-2 A C---1-31-89 THIS SUPPORT WAS REIHSTALLED C---UNDER NCR-N 89 0147
~~
ATE: 08/31/89 VISION: 3 LETDOWN LINE TO RHX TURKEY POINT NUCLEAR PLANT UNIT.4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1<1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS N I 0 PAGE: 56 ZONE NUHBER: 048
SUMMARY
EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATIOH BLOCK**REF.DWG.NO.004-A42 166800 2"-CH-1401-4 PIPE-TO-ELBOW B-J PT 89.40 NDE 3.3-278 C C---10-20-88 PT COMPLETE 166900 2"-CH-1401-5 ELBOW-TO-PIPE B-J PT 89.40 NDE 3.3-277 C C---10-20-88 PT COMPLETE ATE: 08/31/89.VISION: 3 CHEM.8 VOL.CONTROL FROM RHX TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 57 ZONE NUMBER: 049
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD N I 0 S ONGT T RSEH A E I 0 E REMARKS PROCEDURE T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-A43 170000 2"-CH-1402-15 TEE-TO-PIPE B-J PI'9.40 NDE 3.3-330 C C---11-9 88 PT COMPLETE 170500 2"-CH-1402-20 PIPE-TO-TEE 8-J PT 89.40 NDE 3.3-302 C C---10-27-88 PT COMPLETE 170600 2"-CH-1402-21 TEE-TO-PIPE 8 J 89.40 PT 10.20-88 10-25-88 1-10-89 1-11-89 PT Ul'HICK 2-28-89 NDE 3.3-272 CNR-88.4-033 NCR-88.0161 NCR-N.89.0062 PS 89.052 9.4 M.89.102 M-89-210 NIS-2 C C-C-C-C--C-C C-C 10-18-88 ONE (1)LINEAR L=2.850 M=.150 UPSTREAM.400 LEHGTH, REJECT: CNF-88 4-033 ISSUED: REPAIR PERFORMED BY REMOVAL OF INDICATION BY LIGHT'RINDING:
CLOSED OUT 3-10-89 171000 2"-CH-1402-25 TEE-TO.PIPE 8-J PT 89.40 NDE 3.3-331 C C---11-9-88 PT COMPLETE 171200 2"-CH-1402.27 ELBOll-TO-PIPE B.J PI'9.40 NDE 3.3-265 C C--~-10-18.88 PT COMPLETE 171300 2"~CH-1402-28 8-J PT PIPE-TO-ORIFICE (F205C)89.40 HDE 3.3-301 C C---10-27-88 PT COMPLETE
DATE: 08/31/89 VISION: 3 CHEM.&VOL.CONTROL TO RCP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 58 ZONE NUMBER: 050 SUMHARY EXAMI HAT I OH AREA NUMBER IDENT I F I CATION ASME SEC.Xl CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R*>>CALIBRATIOH BLOCK>>>>REF.DWG.NO.004-A44 172700 2"-CH-1403-6 PIPE-TO-ELBOW 8-J PT 89.40 NDE 3.3-269 C C---10-18-88 PT COMPLETE 173500 2"-CH-1403-14 PIPE-TO-ELBOW B-J PT 89.40 NDE 3.3-268 C C---10-18-88 PT COMPLETE 175000 2"-CH-1403-29 ELBOW-TO-PIPE 8-J PT 89.40 NDE 3.3-270 C C---10-18-88 PT COMPLETE DATE: 08/31/89 EVI SION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 1 COMPONENTS PAGE: 59 CHEM.&VOL.CONTROL TO RCP-A SUPPORTS&HANGERS N I 0 ZONE NUMBER: 050 SUMHARY EXAMI HAT I ON AREA NUMBER I DENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATIOH BLOCK*~REF.DUG.NO.004-A44 175800 PS-1 TYPE A U-BOLT RESTRAINT F-C VT-3 F3.10 HDE 4.3-107 C C---10-18-88 COMPLETE DATE: 08/31/89 EVISION: 3 CHEM.8 VOL.COHTROL TO RCP B TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 60 20NE NUMBER: 051
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-A45 178000 2"-CH-1404-18 PIPE-TO-ELBOM B-J PT B9.40 HDE 3.3-256 C C---10-15-88 PT COMPLETE 179200 2"-CH-1404-28 PIPE-TO-VALVE (4-298E)8-J PT B9.40 HDE 3.3-257 C C---10-15-88 PT COMPLETE 179800 2"-CH-1404-33 FLANGE-TO-PIPE 8-J PT 89.40 NDE 3.3-259 C C.--10-15-88 PT COMPLETE PIPE-TO-ELBSJ 8-J PT 89.40 NDE 3.3.258 C C---10-15-88 PT COMPLETE DATE: 08/31/89 EVISIOH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 61 CHEM.&VOL.CONTROL TO RCP-B SUPPORTS 8 HANGERS ZONE NUMBER: 051
SUMMARY
EXAMINATION AREA NUMBER IDENTI F ICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~*REF.DWG.NO.004-A45 180800 27-773-002 U.BOLT RESTRAINT F-C VI'-3 HDE 4.3-113 C C---10-18-88 VT COMPLETE F3.10 181100 27-773.006 PEDESTAL F-C VT-3 F3.10 NDE 4.3 125 C C---11-1-88 VT COMPLETE
DATE: 08/31/89 EVISION: 3 CHEM.8, VOL.CONTROL TO RCPC TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COHPONENTS PAGE: 62 ZONE NUMBER: 052 SUHHARY EXAHINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE S 0 T R A E T C I 0 NGT SEH I 0 E REHARKS G H R**CALIBRATION BLOCK**REF.DWG.NO.004-A46 184710 2"-CN-1405-28 PIPE-TO-FLANGE 8-J PT 89.40 NDE 3.3-308 C C---10-28-88 PT COHPLETE 185900 2"-CH-1405-40 PIPE-TO-FLANGE 8-J PT 89.40 NDE 3.3-307 C C---10-28-88 PT COMPLETE 186000 4-FL-13 FLANGE BOLTING B-G-2 87.50 VT-1 11-8-88 PWO VT-1 NDE 4.1-65 CNR-88-4-053 WA881217110531 NDE 4.1-65A C---C 11-1-88 VT-1 COMPLETE: BORIC ACID-C BUILDUP BETWEEN FLANGES 8 SURFACE RUST-C ON ALL HARDWARE: CNF-88-4-053 ISSUED: C---PWO WA881217110531 ISSUED FOR CLEANING SURFACES;REEXAMINE 4.1.65A, NRI DATE: 08/31/89 E VISION: 3 2" SEAL LEAK OFF RCP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 63 ZONE NUHBER: 053
SUMMARY
EXAMI HAT I ON AREA NUHBER IDENT I F I CAT IOH ASHE SEC.XI CATGY EXAH ITEH NO HETMDO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK~>>REF.DNG.NO.004-A47 187400 2-CH-1406-1 PIPE-TO-FLANGE 8-J PT 89.40 NDE 3.3-248 C C---10-15-88 PT COMPLETE 187500 2"-CH-1406-FB FLANGE BOLTING B.G-2 VT-1 B7.50 NDE 4.1-61 C C---10-18-88 VT COMPLETE: EXAMINED 8 STUDS AND NUTS IN PLACE 187900 2-CH-1406-5 PIPE-TO-ELBON 8-J PT B9.40 NDE 3.3-249 C C---10-15-88 PT COMPLETE 189200 2-CH-1406-17 PIPE-TO-TEE B-J PT 89.40 NDE 3.3-253 C C---10-17-88 PT COMPLETE 189400 2.CH.1406-19 PIPE-TO-TEE 8-J PT B9.40 NDE 3.3-254 C C--.10-17-88 PT COMPLETE 189700 2-CH-1406-22 8-J PT VALVE (4-303A)-TO-PIPE 89.40 NDE 3.3-255 C C---10-17-88 PT COHPLETE DATE: 08/31/89 EVISIOH: 3 2" SEAL LEAk OFF RCP B TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 64 ZONE NUMBER: 054
SUMMARY
EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ON 6T T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~~REF.DWG.NO.004-A48 191000 2-CH-1407-4 ELBN-TO-PIPE B-J PT 89.40 NDE 3.3-251 R1 C C---10-15-88 PT COMPLETE 191600 2-CH-1407-9 PIPE-TO-ELBON B J PT 89.40 NDE 3.3-250 R1 C C---10-15-88 PT COMPLETE 192000 2-CH.1407-13 PIPE-TO-TEE B-J PT B9.40 NDE 3.3-252 C C---10-17-88 PT COMPLETE DATE: 08/31/89 VISION: 3 SEAL LEAK OFF LOOP C TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 65 ZONE NUMBER: 055
SUMMARY
EXAMIHATION AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ON 0T T RSEM A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-A49 193500 2-CH-1408-1 PIPE-TO-FLANGE 8-J PT 89.40 HDE 3.3-306 C C---10-28-88 PT COMPLETE 193600 2"-CM-1408-FB FLANGE BOLTIHG B-G-2 B7.50 VT-1 12-9-88 HDE 4.1-92 CNR-88-4-070 C---C 12-3-88 VT COMPLETE, EVIDENCE OF BORIC.C ACID IN FLANGE SEAL AREA (BORIC ACID RESIDUE): PLANT CONSTRUCTION PERFORMED FIELD INSPECTION AND REPORTED THAT FLANGE SEAL AREA HAS CLEAN NITM NO EVIDENCE OF BORIC ACID 4100 2-CM-1408-6 ELBN-TO-PIPE 8-J PT B9.40 HDE 3.3-305 C C---10.28-88 PT COMPLETE 195300 2-CH-1408-17 PIPE-TO-TEE B-J PT B9.40 HDE 3.3-266 C C---10-18.88 PT COMPLETE DATE: 08/31/89 t~EVIS ION: 3 SEAL LEAKOFF-RCP-C SUPPORTS&HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 66 ZONE HUHBER: 055
SUMMARY
EXAMINATION AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-A49 196400 H-3 U-BOLT RESTRAINT F-C VT-3 NDE 4.3-111 C C---10-18-88 VT COMPLETE F3.10 DATE: 08/31/89 EVISIOH: 3 REACTOR COOLANT PUMP A TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 67 ZONE NUMBER: 056
SUMMARY
EXAMIHATIOH AREA HUHBER IDEHT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-V13A 196900 FSA-1 thru 24 MAIN FLANGE STUDS 8-G-1 UT 60 B6.180 NDE 5.7-4 C C---1-25-89 STUDS 1 THROUGH 24 COMPLETE**UT-18**197100 FNA-1 thru 24 B-G-1 V'I-1 MAIN FLANGE HUTS, WASHERS 8 86.200 BUSHINGS HDE 4.1-84 C C---11-8.88 VT COMPLETE(24 NU'IS IH-PLACE 197400 RCP-(A)-L1 thru L3 t PUMP SUPPORTS CTMT 8-K-1 810.20 VT-3 11-11-88 12-2-89 4-11-89 NDE 4.3-'166 CHR-88-4-061 HCR-88-0190 HCR-H89-0049 C---C 11-7-88 VT COMPLETE: SUPPORT LUG BOLTING-C LOOSE (ALL THREE), CHIPPED CONCRETE AT-C WALL(RUST 8 PAINT FLAKING: RETIGHTEHED C---NUTS)ALL OTHER CONDITIONS ACCEPTABLE.
0 DATE: 08/31/89 REACTOR COOLANT PUMP B TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COHPONEHTS PAGE: 68 ZONE NUMBER: 057
SUMMARY
EXAMIHATION AREA NUMBER IDEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATION BLOCK>>" REF.DWG.NO.004-V13B 197900 FSB-1 thru 24 MAIN FLAHGE STUDS 8-G-1 UT 60 86.180 NDE 5.7-3 C C---1-25-89 UT COMPLETE: STUDS 1 THROUGH 24**UT-18**198000 FNB-1 thru 24 MAIN FLANGE NU'IS, WASHERS 8 BUSHINGS 8-G-1 VT-1 86.200 NDE 4.1-85 C C---11-8-88 VT COMPLETE 198300 RCP(B)-L1 thru L3 PUMP SUPPORTS CTMT B.K-1 VT.3 NDE 4.3.167 810.20 11-11-88 CNR-88 4-062 12-2-88 NCR-88.0191 C---C 11-7-88 VT COMPLETE: SUPPORT LUG BOLTIHG-C LOOSE(ALL THREE): RUST 8 PAINT FLAKING:-C LOOSE HARDWARE ON WALL SUPPORT PLATE: CHIPPED CONCRETE, ACCEPTABLE AS IS.
DATE: 08/31/89 EVISION: 3 REACTOR COOLANT PUMP C TURKEY POIHT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 69 ZONE NUMBER: 058
SUMMARY
EXAMIHATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATIOH BLOCK>>>>REF.DWG.NO.004-V13C 199200 RCP-C-L1 thru L3 PUMP SUPPORTS B-K-1 810.20 VT-3 12-13-88 1-4-89 3-18-89 3-27-89 HDE 4.3-228 CHR-88-4-074 HCR-88.0276 PS 89.017 NCR-N-89-0047 E---C 12-9-88 ADDITIONAL EXAM: SUPPORT LUG---C BOLTING LOOSE(RUST ON HARDWARE, GOUGE,--C CHIPPED CONCRETE:RETIGHTEHED BOLTING, C---CLEANED OFF CORROSION:
GAPS ARE C---ACCEPTABLE AS IS: NO EVIDENCE OF BASELINE FOLLOWIHG CORRECTIVE ACTION: RESCHEDULE NEXT OUTAGE ATE: 08/31/89 VISION: 3 REGENERATIVE NEAT EXCHAHGER TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COMPONENTS PAGE: 70 ZONE NUMBER: 059 SUMHARY EXAMINATIOH AREA NUMBER IDENT IF ICATION ASME SEC.Xi CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DUG.NO.004-V11 204300 RGX 4E200 N/A VT-3 NDE 4.3-117 C--.-C 10-28-88 BORIC ACID RESIDUE NOTED OH VISUAL FOR LEAKAGE 9 START 5 N/A VT-2 NDE 4.2 M892436 C---INSULATION:
THIS EXAMINATION REQUIRED BY DURING RCS RELIEF REQUEST NO.3 J dy'4(og ATE: 08/31/89 VISION: 3 STEAM GENERATOR B SECONDARY SIDE TURKEY POINT NUCLEAR PLANT UNI'I 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 2 COMPOHENTS H I 0 PAGE: 71 ZONE NUMBER: 061
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.HO.004-V9B 205900 4-SG(B)-G C-A LOWER SHELL-TO-TRANSITION C1~10 UT 0 WRV UT 45 AX UT 45 CIRC UT 60 AX UT 60 CIRC HDE 5.1-10 HDE 5.1-14 NDE 5.1-14 NDE 5.1 18 NDE 5.1-18 C C---11-10-88 UT COMPLETE, LUG GEOMETRY:-C-LIMITED EXAM DUE TO STEAM GEHERATOR HAND C---HOLE-C-**UT 7**206000 4-SG(B)-CL C-A TRAN.-TO-UPPER SHELL WELD C1.10 UT 0 WRV UT 45 AX UT 45 CIRC MT UT 60 AX UT 60 CIRC UT 60 AX UT 60 A&C UT 50 AX UT 0 UT 70 AX UT 60 AX EVALUATIOH NDE 5.1-10 HDE 5.1-14 NDE 5.1-14 NDE 2.2-83 NDE 5.1-18 NDE 5.1.18 NDE 5.1-19 HDE 5.1-20 HDE 5.1-21 NDE 5'22 HDE 5.1-23 HDE 5.1-24 HDE 5.1 C C--C--C-C--C C--C-C-C C---C-C-C 11-10-88 UT COMPLETE, SLAG IHDICATIOHS FOUHDi DETERMINED TO BE COHSTRUCT ION FLAWS, ACCEPTABLE.
THIS INDICATION WILL BE REEXAMINED NEXT OUTAGE PER THE UT RESOLUTION AND CTRAC 89-0555.**UT.7~*206100 4-SG(B)-FW C-B FEEDWATER NOZZLE-TO-SHELL C2.21 MT UT 0 WRV UT 45 AX UT 45 CIRC UT 60 AX UT 60 CIRC HDE 2~2-84 HDE 5.1-15 HDE 5.1-15 HDE 5.1-15 HDE 5.1-15 NDE 5.1-15 C C---11-22-88 UT COMPLETE C---C-C c---"*ur-7"" C-206200 4-SG(B)-FW-IRS FEEDWATER NOZZLE I.R.C-B UT 45 CIRC HDE 5.13-2 C2.22 C--C-11-21-88 UT COMPLETE ZONE 2 (CAL AXIAL SCAH CIRC), SUPPORT ASSEMBLY GEOMETRY**UT-3**206400 4-SG(B)-ST STEAM NOZZLE-TO-HEAD C-B C2.21 MT HDE 2.2-76 UT 45 AX HDE 5.1-11 UT 45 CIRC NDE 5.1-11 UT 60 AX HDE 5.1-12 UT 60 CIRC HDE 5.1-12 UT 0 WRV HDE 5.1-13 C C---11-11-88 MT COMPLETE: 11-15 88 UT 45 AX C---&CIRC COMPLETE ONE SIDE EXAM SCAN C---LIMITATION C-**UT-3*+C-DATE: 08/31/89 VISION: 3 STEAM GENERATOR B SECONDARY SIDE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 72 ZONE NUMBER: 061
SUMMARY
EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-V9B 206500 4-SG(B)-ST-IRS STEAH NOZZLE I.R.C.B UT 45 AX NDE 5.13-1 C C---11-14-88 UT COMPLETE ZONE 2 NOZZLE BLEND C2.22 AREA**UT-3**206700 4-SG(B)-IS-2 INTEGRAL SUPPORT II2 NDE 2.2 12-13-88 THIS SUPPORI'OES NOT EXIST, VERIFIED 1988 OUTAGE
!1~
DATE: 08/31/89 VISION: 3 RHR TO PUMP A TURKEY POINT NUCLEAR PLANT'HIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 73 ZONE NUMBER: 063
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK"" REF.DWG.NO.004-B1 208500 14"-RHR-2401-1 VALVE 4-751-TO-PIPE C-F PT C5.11 NDE 3.3-227 C C---10-12-88 PT COMPLETE 208550 14"-RHR-2401-1LS PIPE LONG SEAM C.F PT C5.12 PT NDE 3.3-218 NDE 3.3-233 C C--10-12-88 PT COMPLETE, 2.5T DOWHSTREAM OF C---WELD 1: 10-13-88 PT COMPLETE 2.5T UPSTREAM OF WELD 2 208600 14"-RHR-2401-2 PIPE TO ELBOW C-F PT C5.11 HDE 3.3-232 CC---10-13-88 PT COMPLETE 08700 14"-RHR-2401-3 ELBOW TO PIPE C-F PT C5.11 NDE 3.3.219 C C---10-12-88 PT COMPLETE 208750 14"-RHR-2401-3LS1 C-F PT ELBOW LONG SEAM OUTSIDE RADiUS C5.12'PT NDE 3.3-220 C C---10-12-88 PT COMPLETE, 2.5T DOWNSTREAM OF NDE 3.3-222 C---WELD 3 AND 2.5T UPSTREAM OF WELD 4 208775 14"-RHR-2401-3LS2 C-F PT ELBOW LONG SEAM INSIDE RADIUS C5.12 PT NDE 3.3-221 C C---10.12-88 PT COMPLETE, 2.5T DOWNSTREAM OF NDE 3.3-223 C-WELD 3 AND 2.5T UPSTREAM OF WELD 4 208800 14"-RHR-2401-4 ELBOW-TO-PIPE C-F PT C5.11 NDE 3.3.224 C C---10-12-88 PT COMPLETE 208850 14"-RHR-2401-4LS PIPE LOHG SEAM C-F Pi'5.12 Pj'DE 3.3-225 NDE 3.3-234 C C---10.12-88 PT COMPLETE, 2.5T DOWNSTREAM OF C---MELO 4: 10-13-88 PT COMPLETE, 2.5T UPSTREAM OF WELD 5 DATE: 08/31/89 VISIOH: 3 RHR TO PUMP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS N I 0 PAGE: 74 ZONE NUMBER: 063
SUMMARY
EXAMINATION AREA NUMBER IDEHT I F I CAT I OH ASME SEC.XI CATGY.EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B1 208900 14"-RHR-2401-5 PIPE-TO-PUP C-F PT C5.11 HDE 3.3-235 C C---10-13-88 PT COMPLEl'E 208950 14"-RHR.2401.5LS PUP LONG SEAM C.F PT C5.12 PT HDE 3.3-236 C C---10-13-88 PT COMPLETE, 2.5T DOWNSTREAM OF NDE 3.3-237 C---WELD 5 AND 2.5T UPSTREAM OF WELD SA 209000 14"-RHR-2401 5A PUP TO ELBOW C-F PT C5.11 NDE 3.3.238 C C---10-13-88 PT COMPLETE J 9100 14".RHR-2401-5B ELBOW TO PUP C-F PT C5.11 NDE 3.3.239 C C...10-13-88 PT COMPLETE 209150 14"-RHR-2401-5BLS PUP LONG SEAM C-F PT C5.12 PT NDE 3.3-240 C C---10.13-88 PT COMPLETE(2.5T DOWNSTREAM OF NDE 3.3-241 C---WELD 58 AND 2.5T UPSTREAM OF'WELD 6 209200 14"-RHR-2401-6 PUP TO PIPE C-F PT C5.11 NDE 3.3.242 C C---10.13-88 PT COMPLETE 209250 14"-RHR-2401-6LS PIPE LONG SEAM C-F PT C5.12 NDE 3.3-243 C C---10.13-88 PT COMPLETE 2.5T DOWNSTREAM OF WELD 6 209260 14"-RHR-2401-7 PIPE TO ELBOW C-F PT C5.11 NDE 3.3-141 C C---9-15-88 PT COMPLETE DATE: 08/31/89 VISION: 3 RHR TO PUMP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT'TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 75 ZONE NUMBER: 063
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004.81 209270 14"-RHR-2401-8 ELBOW TO PIPE CF PT C5.1'I NDE 3.3-142 C C---9-15-88 PT COMPLETE 209300 14"-RHR-2401-9 PIPE-TO-ELBOW C-F PT C5.11 NDE 3.3-170 C C---9-29-88 PT COMPLETE 209400 14"-RHR.2401-10 ELBOW-TO-PIPE C-F PT C5.11'DE 3.3-171 C C---9-29-88 PT COMPLETE 09500 14"-RHR-2401-11 PIPE-TO-ELBOW C-F PT C5.11 NDE 3.3-172 C C---9-29.88 PT COMPLETE 209600 14".RHR-2401-12 ELBOW-TO-PIPE C-F PT C5.11 NDE 3.3-313 C C---11-1-88 PT COMPLETE 209700 14"-RHR-2401-13 PIPE-TO-TEE C.F PT C5.11 NDE 3.3-312 C C---11-1-88 PT COMPLETE 209800 14"-RHR-2401-14 TEE-TO-PIPE CF PT C5.11 NDE 3.3-311 C C---11-1-88 PT COMPLETE
ATE: 08/31/89 VISION: 3 RHR TO PUMP A-SUPPORTS 8 HANGERS ZONE NUMBER: 063
SUMMARY
EXAMINATION AREA NUMBER IDEN1'IFICATIOH TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD IN'IERVAL CLASS 2 COMPONENTS ASME SEC.XI CATGY EXAM H I 0 S 0 H G T T R S E H A E I 0 E REMARKS ITEM HO METHOD PROCEDURE T C 0 M R**CALIBRATION BLOCK*" PAGE: 76 REF.DUG.HO.004-B1 210800 4-ACH-178 BOX RESTRAINT F-C VT-3 F3.10 HDE 4.3-159 C C---11-5-88 VT COMPLETE 211200 4-SR-627 SPRIHG HANGER F-C F3.10 VT-3 11-9-88 11.28-80 NDE 4.3-162 CNR-88.4-055 HCR-1182-453 C---C 11-4-88 COMPLETE, INCOMPLETE HUT-C ENGAGEMENT AT FLOOR: PLANT SUBMITTED NCR C---'WHICH STATES THIS CONDITION IS ACCEPTABLE BY CALCULATION AHD MEETS FUNCTIONAL REQUIREMENTS 211300 4-SR-627 F-C VT-4 F3.50 NDE 4.3-162 C C---11-4-88 VT COMPLETE 0
A TE: 08/31/89 VISION: 3 RNR TO PUMP B TURKEY POIHT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)i SECOND PERIODS SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 77 ZONE NUMBER: 064
SUMMARY
EXAHINATION AREA NUMBER IDEHI'IFICATION ASME SEC.XI CATGY ITEH NO EXAM METHOD PROCEDURE N I 0 ONGT RSEH E I 0 E REMARKS C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-82 212150 VALVE 4-752-B VALVE BOLTING VT-1 NDE 4.1-98 C C---1-6-89 REEXAM 212700 14"-RHR-2403-10 ELBN-TO-PIPE C-F PT C5.11 NDE 3.3-138 C C---9-14-88 PT COMPLETE DATE: 08/31/89 EVISIOH: 3 RESIDUAL HEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS N I 0 PAGE: 78 ZONE NUMBER: 065
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK~*REF.DWG.NO.004-B3 213100 14"-RHR-2404-1 REDUCER-TO-TEE C-F PT C5.11 NDE 3.3-317 C C---'11-3-88 PT COMPLETE 214500 14"-RHR-2404-15 VALVE (MV8628)-TO-ELBOW C-F PT C5.11 NDE 3.3-318 C C---11-3-88 PT COMPLETE 214600 14"-RHR-2404-16 PIPE-TO-PIPE C-F PT C5.11 NDE 3.3-319 C C---1'1-3-88 PT COMPLETE 14700 14"-RHR-2404-17 PIPE-TO-TEE I C-F PT C5.11 NDE 3.3-327 C C---11-3-88 PT COMPLETE DATE: 08/31/89 EVI SION: 3 TURKEY POINT NUCLEAR PLANT UNIT'INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE 79 14" RESIDUAL HEAT REMOVAL SUPPORTS 8 HAHGERS N I 0 ZONE NUMBER: 065
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD S 0 H G T T R S E N A E I 0 E REMARKS PROCEDURE T C G M R**CALIBRATION BLOCK**REF.DUG.HO.004-B3 214800 SR-615 STRUT HANGER F-C VT-3 HDE 4.3-164 C C---11-9-88 VT COMPLETE F3.10 0
DATE: 08/31/89 EVISION: 3 RESIDUAL HEAT REHOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPOHENTS PAGE: 80 ZONE NUMBER: 066
SUMMARY
EXAMINATION AREA NUMBER IDEHT IF ICATION ASME SEC.Xl CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B4 215850 VALVE 4-861A VALVE BOLTING VT-1 NDE 4.1-100 C C---1-12-89 VT COMPLETE: EXAMINED AT THE REQUEST OF THE STATION.
DATE: 08/31/89 EVISIOH: 3 RESIDUAL HEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORI'ABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 2 COMPONENTS PAGE: 81 ZONE NUMBER:
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DHG.NO.215852 VALVE 4-756A VALVE BOLTING I VT-1 HDE 4.1-97 C C---1-6-89 REEXAM: EXAMINED AT THE REQUEST OF THE STATION.215854 VALVE 4-761A VALVE BOLTING VT-1 NDE 4.1.99 C C---1-6-89 REEXAM: EXAMIHED AT THE REQUEST OF THE STATION.
DATE: 08/31/89 VISION: 3 RESIDUAL HEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS N I 0 PAGE: 82 ZONE NUMBER: 067
SUMMARY
EXAMINATIOH AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S 0 H G T T R S E H A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*" REF.DWG.NO.004-85 216500 14"-RHR-2406-4 ELBOM-TO-PIPE C-F PT C5.11 NDE 3.3-3CO C C---12-12-88 PT COMPLETE 217100 14"-RHR-2406-FW10 ELBN-TO-PIPE C-F PT C5.11 NDE 3.3-339 C C.--12-12-88 PT COMPLETE 217650 VALVE C-8618 VALVE BOLTING VT-1 HDE 4.1-101 C C---1-12-89 VT COMPLETE
DATE: 08/31/89'VISION: 3 RESIDUAL HEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COHPONENI'S PAGE: 83 ZONE NUHBER: 068 SUHMARY EXAHINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-86 218500 12"-RHR-2401-2 REDUCER-TO-TEE C-F PT C5.11 NDE 3.3-165 C C---9-26-88 PT COHPLETE 219400 12"-RHR-2401-11 PIPE TO-VALVE 4 605 C-F PT C5.11 NDE 3.3-162 C C---9-26 88 PT COMPLETE 219500 12"-RHR-2401-12 VALVE 4-605-TO-PIPE C-F PT C5.11 NDE 3.3-164 C C---9-26-88 PT COHPLETE 600 12"-RNR-2401-13 PIPE-TO-ELBN C-F C5.11 NDE 3.3 INACCESSIBLE DUE TO SUPPORT SR-635, VERIFIEO DURING THE 1988 OUTAGE.
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECT ION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 84 12" RESIDUAL HEAT REMOVAL SUPPORTS&HANGERS N I 0 ZONE NUMBER: 068
SUMMARY
EXAMINATION AREA HUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-86 219900 SR-635 DUAL SPRING HANGER 18'UX BD F-C VT-3 F3.10 VT.3 HDE 4.3-73 C C---9-26-88 VT COMPLETE NDE 4.3-89.638 C-220000 SR-635 DUAL SPRING HANGER (3100)18'UX BD F C F3.50 Vr-4 9.28.88 3-8-89 3-21-89 VT-4 HDE 4.3.73 CHR 88-4 020 HCR-89-0129 WA890320165445 NDE 4.3-89-638 C C---9-26-88 VI'OMPLETE:
CHF ISSUED FOR-C VERIFICATION OF SETTINGS;HCR-89-0129
-C ISSUED FOR ENGINEERING EVALUATION:
PWO C---WA898328165445 ISSUED FOR CORRECTIVE C---ACTIOH 1'
DATE: 08/31/89 VISIOH: 3 RESIDUAL NEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COHPONENTS PAGE: 85 ZONE NUMBER: 069 SUMHARY EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R~*CALIBRATION BLOCK**REF.DWG.NO.004-B7 222600 12".RNR-2402-FW26 ELBOW-TO-PIPE C-F PT CS.'11 NDE 3.3-329 C C--11-9-88 PT COHPLETE: PAR'TIAL EXAH DUE TO ADJOINING WELD OH PIPE SUPPORT 222650 12"-RHR-2402-26LS PIPE LONG SEAM CF PT C5.12 NDE 3.3-201 C C---10-8.88 PT COMPLETE(2'T UPSTREAH OF'WELD 27 222700 12"-RNR-2402-27 PIPE-TO-TEE C-F PT C5.11 NDE 3.3-200 C C--10-8-88 PT COMPLETE 800 12"-RHR-2402-28 TEE-TO-PIPE C-F PT C5.11 NDE 3.3-190 C C---10-8-88 PT COMPLETE 222850 12"-RHR-2402-28LS PIPE-LONG SEAH C-F PT C5.12 PT NDE 3.3-191 NDE 3.3-193 C C---10.8-88 PT COHPLETE, 2.5T DOWNSTREAH OF C--.WELD 28 AND 2.5T UPSTREAM OF WELD 29 222900 12".RHR.2402-29 PIPE-TO-ELBOW C-F PT C5.11 NDE 3.3-192 C C---10-8 88 PT COHPLETE 223000 12".RHR-2402-30 ELBOW-TO-PIPE C-F PT C5.11 NDE 3.3.194 C C-..10.8.88 PT COMPLETE 223090 12"-RHR-2402.30BLS PIPE-LONG SEAH C-F PT C5.12 NDE 3.3.244 C C---10-8-88 PT COMPLETE 2.5T EXAHINED UPSTREAM OF WELD 31 gi' DA'IE: 08/31/89 VISION: 3 RESIDUAL HEAT REMOVAL'URKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IN'NERVAL CLASS 2 COMPONENTS PAGE: 86 LONE NUMBER: 069 ASME H I 0 S OH 0T
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC.XI CATGY EXAM RSEH E I 0 E REMARKS ITEM HO METHOD PROCEDURE T, C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B7 223100 12"-RHR-2402-31 PIPE-TO-ELBOW C-F PT C5.11 NDE 3.3-196 C C-.-10-8-88 PT COMPLETE 223200 12"-RHR-2402-32 ELBOW-TO-PIPE C-F PT C5.11 HDE 3.3-195 C C-.-10.8.88 PT COMPLETE 223250 12"-RHR-2402-32LS PIPE-LONG SEAM C-F PT C5.12 PT NDE 3.3-197 C C---10.8-88 PT COMPLETE, 2.5T DOWNSTREAM OF HDE 3.3-199 C---WELD 32 AHD 2'T UPSTREAM OF WELD 33 300 12"-RHR-2402-33 PIPE-TO-TEE C-F PT C5.11 HDE 3.3-198 C C---10.8-88 PT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 87 12" RESIDUAL MEAT REMOVAL SUPPORTS AND HANGERS ZONE NUMBER: 069
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~>>REF.DWG.NO.004-B7 224700 4.69-A1 ANCHOR F.C VT-3 F3.10 HDE 4.3-160 C C---11 5-88 VT COMPLETE
DATE: 08/31/89 VISION: 3 RHR PUMP 4-P-210A TO RHEA 4-E-206A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 2 COMPOHENTS N I 0 PAGE: 88 ZONE NUMBER: 070
SUMMARY
EXAMINATION AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C 0 M R**CALIBRATION BLOCK**REF.DWG.NO.004-BB 224899 8"-RHR-2403-1 PUMP CASING-TO-PIPE C-F PT C5.11 NDE 3.3-149 C C---9-20-88 PT COMPLETE 224900 8"-RHR-2403-2 PIPE-TO-REDUCER C-F PT C5.11 NDE 3.3-148 C C---9-20-88 PT COMPLETE 225150 VALVE 4-757E VALVE BOLTING'VT.1 HDE 4.1.67 C C-.-10-31-88 VT COMPLETE 5450 VALVE 4-7548 VALVE BOLTING VT-1 11-5-88 1-4-89'I-2-89 NDE 4.1-69 C---C 10-31-88 VT COMPLETE: BORIC ACID RESIDUE CHR-88.4-048
---C 1-4-89 WO¹WA881209134206 DISASSEMBLE, WA881209134206 C---CLEAN, INSPECT AHD REPLACE STUDS 0190.28 C-225902 VALVE 4.7570 VALVE BOLTING 4-757D VT-1 HDE 4.1.96 C C---1-6-89 REEXAMINATION OF BOLTING: EXAMINED AT THE REQUEST OF THE STATION.226000 10"-RHR-2401-13 VALVE 4-757D-TO-REDUCER C-F PT C5.11 NDE 3.3-166 C C---9-26.88 COMPLETE 226250 VALVE 4-7578 VALVE BOLTIHG VT-1 11-5-88 12-16-88 12.15-88 NDE 4~1-68 C---C 10-31-88 VT COMPLETE, SEVERE CORROSION CNR-88-4-048 C---AHD BORIC ACID BUILDUP, DISASSEMBLED, PWOWA880111437 C.--CLEANED, INSPECTED(AND REPLACED STUDS 0190.28 C.226400 10"-RHR-2401-17 PIPE-TO HX NOZZLE NDE 3.3 12-13-88 THIS WELD DOES NOT EXISI', VERIFIED DURING 1988 OUTAGE f'I 0 DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 89 RNR 4-P210A TO RHEA4-E206A SUPPORTS&HANGERS ZOHE NUMBER: 070
SUMMARY
EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-BB 226500 SR-643 DOUBLE ACTIHG RESTRAINT F-C VT-3 NDE 4.3-68 C C---9-20 88 COMPLETE F3.10 226502 SR-643 VARIABLE SPRING SUPPORT F-C VT-4 NDE 4.3 69 F3.50 9-21.88 CHR-88-4-019 C---C 9-20-88 VT COMPLETE, SETTING IS OUTSIDE OF ACCEPTANCE CRITERIA.ACCEPTED AS-IS BY HUCLEAR ENGINEERING, WILL BE RESCHEDULED FOR THE NEXT OUTAGE
~n pt ATE: 08/31/89 VISION: 3 RHR PUMP 4-P-210B TO RHEA 4-E-206B TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988)~SECOND PERIODS SECOND INTERVAL CLASS 2 COMPONENTS H I 0 PAGE: 90 ZONE NUMBER: 071
SUMMARY
EXAMIHAT ION AREA NUMBER IDEHT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.HO.004-B9 226799 8"-RHR-2404-1 PUMP CASING-TO-PIPE C-F PT C5.11 HDE 3.3-150 C C---9-20.88 PT COMPLETE 227000 10"-RHR-2402-4 VALVE 4-753A.TO-ELBSI C.F PT C5.11 NDE 3.3-151 C C---9-20-88 PT COMPLETE 227450 VALVE 4-754A VALVE BOLTIHG VT-1 HDE 4.1-66 C-..C 10.31-88 VT COMPLETE, SEVERE CORROSION 11-5.88 CHR-88-4.048
--.C AHD BORIC ACID BUILD UP(OISASSEMBLEDi 1-4.89 NA880628100224 C---CLEANED, INSPECTED)
AHD REPLACED STUDS 7600 10"-RHR-2402-10 TEE-TO-PIPE C-F PT C5.11 NDE 3.3-163 C C---9.26-88 PT COMPLETE 227750 VALVE 4-757C VALVE BOLTIHG VT-1 HDE 4.1-71 C---C 10.31-88 VT COMPLETE, CORRODED STUDS AND 11-5.88 CHR-88-4-048
--.C BORIC ACID RESIDUE, DISASSEMBLED, 12-22-88 PWOWA880111448 C---CLEANED, INSPECTED, AHD REPLACED BOLTS'l2-14-88 0190.28 C-228950 VALVE 4-757A VALVE BOLTING VT-1 NDE 4.1-70 C---C 10 31-88 VT COMPLETE(SEVERE CORROSION 11-5-88 CHR-88.4-048
---C AHD BORIC ACID RESIDUE(DISASSEMBLED(12-16-88 PHOHA880111452 C---CLEANED(INSPECTED, AHD REPLACED STUDS 12-18.88 0190.28 C-0 a DATE: 08/31/89 VISION: 3 RHR DISCHARGE LOOP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 91 ZOHE NUMBER: 072
SUMMARY
EXAMINATION AREA NUMBER IDENTIF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*>>REF.DWG.NO.004-810 229400 10"-RHR-2403-1 HX NOZZLE-TO-PIPE C-F PI'5.11 NDE 3.3.145 C C---9-8-88 PT COMPLETE 229800 10"-RHR-2403-5 ELBOW.TO.PIPE C-F PT C5.11 NDE 3.3-133 C C---9.8-88 PTCOMPLETE 230250 VALVE 4-759A VALVE BOLTING VT-1 NDE 4.1-88 A--C 11-14-88 VALVE BOLTING EXAMINED IN PLACE, HEAVY CORROSION:
AUGMEHTEO EXAMINATION IMPOSEO BY RELIEF REQUEST NO.8 230300 10"-RHR-2403-10 VALVE 4-759A-TO-REDUCER C-F PT C5.11 NDE 3.3.146 C C---9-20-88 PT COMPLETE DATE: 08/31/89 VISION: 3 RESIDUAL HEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 92 ZONE NUMBER: 075
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.OWG.NO.004-813 231650 8"-RHR-2403-FW1 TEE-TO-PIPE C-F PT C5.11 NDE 3.3.161 C C---9-26 88 PT COMPLETE 231653 8".RHR-2403.4 PIPE (SWEEP-0 LET)TO CAP C-F PT C5.11 HDE 3.3.167 C C---9-26-88 PT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 93 8" RESIDUAL NEAT REMOVAL SUPPORTS AND HANGERS N I 0 ZONE NUHBER: 075 SUMHARY EXAHINAT ION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH NO HETNCO PROCEDURE S ONGT T RSEN A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK*~REF.DUG.NO.004-B13 231700 SR-645 ANCHOR F-C VT.3 NDE 4.3-72 C C---9 26-88 VT COMPLETE F3.10 TE: 08/31/89 ISIOH: 3 RESIDUAL HEAT REMOVAL TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORI'ABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 2 COMPONENTS PAGE: 94 ZONE NUMBER: 076
SUMMARY
EXAMIHATIOH AREA NUMBER IDENT'I F I CAT I OH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.HO.004.B14 231855 8"-RHR-2404-6 ELBOW-TO-PIPE C-F PT C5.11 HDE 3.3-144 C C---9-15-88 PT COMPLETE 231856 8"-RHR-2404-7 PIPE (SWEEP-0-LET)
TO CAP C-F PT C5~11 NDE 3.3-168 C C---9-26-88 PT COMPLETE
ATE: 08/31/89 VISION: 3 I RWST TO SAFETY INJECTION SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IHI'ERVAL CLASS 2 COMPONENTS N I 0 PAGE: 95 ZONE NUMBER: 077
SUMMARY
EXAMIHAI'ION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM.ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~*REF.DWG.NO.004-B15 231950 16"-SI-2401-1 FLAHGE-TO-PIPE C-F PT C5.11 NDE 3.3 152 C C---9 20 88 PT COMPLETE 231954 16"-SI-2401-5 PIPE-TO-VALVE (MOV-864B)
C-F PT C5.11 HDE 3.3-153 C C..-9-20.88 PT COMPLETE 231969 16".SI-2401-20 ELB(N-TO-PIPE C-F PT C5.11 NDE 3.3-137 C C---9-8-88 PT COMPLETE 1970 16"-SI-2401-FW21 PIPE-TO-TEE C-F PT C5.11 NDE 3.3-136 C C---9-8.88 PT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 96 RUST TO SAFETY INJECTION SYSTEM-16"-SUPPORTS
&HAN ZONE NUMBER: 077
SUMMARY
EXAMINATION AREA NUMBER IDENI'IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B15 232800 4-SIN.48 U BOLT RESTRAINT F-C V'I-3 F3.10 NDE 4.3.64 C C---9-8-88 V'I COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 97 LPSI FROM ACCUMULATOR A ZONE NUMBER: 078
SUMMARY
EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B16 232850 10"-SI-2401-1A NOZZLE-TO-PIPE C-F C5.21 PT.NDE 3.3.177 UT 45 AX NDE 5.4-12 UT 45 CIRC NDE 5.4-12 UT 60 AX NDE 5.4-13 C C---10-3-88 PT COMPLETE 10-5-88 UT C---COMPLETE: NO EXAM UPSTREAM DUE TO HOZZLE C---CONFIGURATION C-**UT-27**232856 10"-SI.2401.6 PIPE-TO-VALVE 4-8750 C.F C5.21 PT HDE 3.3.178 UT 45 AX HDE 5.4.12 UT 45 CIRC HDE 5.4-12 UT 60 AX NDE 5.4-13 C-C.-10-3-88 PT COMPLETE, LIGHT PINK C--.INDICATIONS NOTED 360 DEGREE'S DUE TO C---GRINDING MARKS: 10-5-88 UT COMPLETE, NO C---EXAM DOWHSTREAM DUE TO VALVE COHFIGURATIOH
- UT-27**
r ATE: 08/31/89 VISION: LPSI FROM ACCUMULATOR C TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 98 ZONE HUMBER: 080
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I.0 E REMARKS T C G M R**CALIBRATIOH BLOCK*>>REF.DWG.HO.004-818 233250 10"-Sl-2403-1A NOZZLE TO PIPE C-F C5.21 PT NDE 3.3-208 UT 45 AX HDE 5.4.20 UT 45 CIRC NDE 5.4 20 UT 60 AX NDE 5.4-20 C C---10-10-88 PT COMPLETE: 10-21-88 UT C---COMPLETE C-C-**UT 27k%233254 10"-Sl-2403-4 PIPE-TO-VALVE 4-865C C-F C5.21 PT UT 45 AX UT 45 CIRC UT 60 AX 11-11-88 11-28.88 HDE 3.3-207 HDE 5.4-20 NDE 5.4-20 NDE 5.4-20 CNR-88.4.063 HCR-88.0200 C C--10-10-88 PT COMPLETE: 10-21-88 UT C-COMPLETE, COUHTERBORE GEOMETRY: UT C---SHONED IMPROPER COUHTERBORE AND-C-THICKNESS, ACCEPTABLE AS-IS-C**UT-27**C-ATE: 08/31/89 VISION: 3 LOU PRESSURE SAFETY INJECTION TURKEY POINT NUCLEAR PLAHT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OU'IAGE 1 (1988), SECOND PERIOD, SECOND INI'ERVAL CLASS 2 COMPONENTS PAGE: 99 ZONE NUMBER: 081 ASME N I 0 S ONGT
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC.XI T RSEH CATGY EXAM A E I 0 E REMARKS ITEM NO METHOD PROCEDURE T C G M R**CALIBRATIOH'BLOCK**
REF.DUG.NO.004-B19 233458 10"-Sl-2407-4 PIPE-TO-VALVE 4-885 C F C5.21 PT NDE 3.3-211 UT 45 AX NDE 5.4-10 UT 45 CiRC NDE 5.4.10 UT 60 AX NDE 5.4 11 C C-C-C-C-10.6-88 P'I COMPLETE: DCR-88-4-031 ISSUED FOR VERIFICATION OF MATERIAL, DIAMETER AND SCHEDULE: 10-6-88 UT COMPLETE: NO EXAM UPSTREAM DUE TO VALVE CONFIGURATION
- UT-27*233466 10"-Sl-2407-5 VALVE 4-885-TO-ELBOM C-F C5.21 PT NDE 3.3-212 UT 45 AX NDE 5.4.10 UT 45 CIRC NDE 5.4-10 O'I 60 AX NDE 5.4-11 C C---10.6-88 Pl'OMPLETE:
DCR-88-4-031 ISSUED C--.FOR VERIFICATION OF MATERIAL, DIAMETER C---AHD SCHEDULE: 10-6-88 UT COMPLETE: NO C--EXAM UPSTREAM DUE TO VALVE CONFIGURATION
- UT-27**
DATE: 08/31/89 VISION: 3 LOW PRESSURE SAFETY INJECTION'IURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 100 ZONE NUHBER: 082 SUHHARY EXAHINATION AREA NUMBER IDEN1'IFICATIOH ASHE SEC.XI CATGY EXAM ITEH NO HETNOD PROCEDURE H I 0 S OHGT T RSEN A E I 0 E REHARKS T C G H R**CALIBRATIOH BLOCK*~REF.DWG.NO.004-820 233652 10"-Sl-2406-3 TEE-TO-REDUCER C-F PT C5.11 NDE 3.3-147 C C-9-20-88 PT COMPLETE
ATE: 08/31/89 VISION: 3 LPSI 10" SUPPORTS AND HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORI'ABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 101 ZONE NUMBER: 082
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B20 233700 4-SR-616 PIPE SUPPORT 12'UX BD F C F3.10 VT-3 VT-3 NDE 4.3-70 C C.--9.20-88 VT COMPLETE HDE 4.3.89-637 C---233800-4-SR-616 SPRING HANGER (VSIF-10)12'UX BD F-C F3.50 Vr-4 9-21-88 3.14-89 3-21-89 VT-4 NDE 4.3-70 CNR-88-4-018 HCR-89-0123 WA890320164616 NDE 4.3-89-637 C C---9-20-88 VT COMPLETE: SETTIHG OUT OF-C RANGE: SPRING READJUSTED TO WITHIN-C DESIGN REOUIREMEHTS C-C-ATE: 08/31/89/ISION: 3 LOW PRESSURE SAFETY INJECTION TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 102 ZONE NUMBER: 084
SUMMARY
EXAMINATION AREA NUMBER IDEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.HO.004-822 234276 8"-Sl.2402-14 PIPE-TO-ELBOW C-F C5.21 PT NDE 3.3-188 UT 45 AX NDE 5.4 23 UT 45 CIRC HDE 5.4-23 UT 60 AX NDE 5.4-23 C C---10-8-88 PT COMPLETE: 10-14-88 UT-C-COMPLETE: COUNTERBORE, ROOT, AHD ID C..-GEOMETRY-C-**UT-41**234282 8"-SI-2402-17 ELBOW.TO-PIPE C-F C5.21 PT HDE 3.3-187 UT 45 AX NDE 5.4-29 UT 45 CIRC NDE 5.4-29 UT 60 AX NDE 5.4-29 C C---10-8.88 PT COMPLETE: 10-31-88 UT-C-COMPLETE: COUNTERBORE AHD ROOT GEOMETRY C--C-**UT-41*" 84 8"-SI-2402-18 PIPE-TO-VALVE 4-876C C-F C5.21 PT NDE 3.3-189 UT 45 AX NDE 5.4.29 UT 45 CIRC HDE 5.4-29 UT 60 AX HOE 5.4-29 C C-.-10.8.88 PT COMPLETE C-..10-31-88 UT COMPLETE C-C-**UT-41**
A'IE: 08/31/89 VISION: 3 8" SAFETY INJECTION SUPPORTS AND HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS N I 0 PAGE: 103 ZONE HUMBER: 084
SUMMARY
EXAMINATION AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C 0 M R**CALIBRATION BLOCK~*5614-M-509 REF.DWG.NO.004-822 234300 8073.H.809-05 LINEAR BOX RESTRAINT 17'-0" F-B VT-3 NDE 4.3-100 C C.--10-8-88 Vl'OMPLETE F2.10 234400 SR-445 BOX RESTRAINT CI EL 19-3 F.C F3.10 10.12-88 1-19-89 1.6-89 VT-3 3-6-89 10.62-AB88-018 A HCR-N-89-0130 NCR.89.0007 9.9-M89-480 HIS-2-C 1-28-89 DURING ISI DRAWING WALKDOWH ON-C SUPPORT VERIFICATION UNACCEPTABLE WELDS C WERE IDEHTIFIEDI THIS CONDITION WAS C---CORRECTED C-235000 8073-H-809-04 LINEAR BOX RESTRAIHI' 7 I OII F-B VT-3 F2.10 NDE 4.3-105 R1 C C---10-10.88 VT COMPLETE 235500 8073-H.809-02 LINEAR BOX RESTRAINT 1 7 I Dll F-B VT-3 F2.10 HDE 4.3-99 C C---10.8-88 VT COMPLETE
ATE: 08/31/89 VISION: 3 LOU PRESSURE SAFETY INJECTION TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 104 ZONE NUMBER: 086
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-B24 236400 8"-SI-2404.2 PIPE-TO-VALVE 4-876A C-F C5.21 PT NDE 3.3-202 UT 45 AX HDE 5.4-18 , UT 45 CIRC HDE 5.4-18 UT 60 AX NDE 5.4-18 C C-'-10.8.88 PT COMPLETE: 10-18-88 UT-C-COMPLETE, BEAM REDIRECTIOH TO INSIDE C---SURFACE-C-<<*ur-41**
DATE: 08/31/89 VISIOH: 3 LPSI TO CS PUMP B TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND IN'IERVAL CLASS 2 COMPONENTS PAGE: 105 ZONE NUMBER: 087
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.HO.004-B25 236600 8"-Sl-2405-1 TEE-I'0-ELBSI C-F PT C5.11 HDE 3.3-135 C C---9-9-88 PT COMPLETE 237000 84-SI-2405-6 PIPE-TO-VALVE 4-844B C-F PT C5.11 HDE 3'-143 C C.--9.15.88 PT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECI'IOH FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 106 SUCTION TO CONT.SPRAY PUMP 4P-214B SUPP.8 MANGER ZONE NUMBER: 087
SUMMARY
EXAMINATION AREA HUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.D'NG.NO.004-B25 237400 4-218-A ANCHOR F-C VT-3 F3.10 VT-3 NDE 4.3-65 NDE 4.3.98 C C---9.9-88 VT COMPLETE C.--10.8-88 RE EXAM ATE: 08/31/89 VISION: 3 LPSI TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 ('l988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS ZONE NUMBER: 088
SUMMARY
EXAMINATION AREA HUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO MEI'HOO PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-026 237500 8"-Sl-2406-FlJ1 REDUCER-TO-PIPE C-F PT C5.11 NDE 3.3-154 C C---9.21-88 PT COMPLETE 237900 8"-Sl-2406-5 C-F PT VALVE 4 396C.TO-ELBON C5.11 NDE 3.3-155 C C.--9-21-88 PT COMPLETE 238400 8"-Sl-2406-11 TEE-TO-REDUCER C-F PT C5.11 HDE 3.3-159 C C---9-23-88 PT COMPLETE ATE: 08/31/89 VI SION: 3 8" SAFETY INJECTION SUPPORTS 8 HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 108 ZOHE NUMBER: 088
SUMMARY
EXAMINATION AREA NUMBER IDENT IF I CAT ION ASME SEC.XI CATGY EXAM ITEM NO MEI'HOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.HO.004-B26 238600 4-PRWH-4 U BOLT RESTRAINT AHD HORIZ.STRUI'.C F3.10 VT-3 2-4-89 1-17-89 4-18-89 HDE 4.3.71 H89.593 HCR-88.0253 NCR.H-89.0113 M-89-2122 C C---9-21-88 PT COMPLETE-C C-gt!v~'
ATE: 08/31/89 VISIOH: 3 LOW PRESSURE SAFETY INJECTION TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES, OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS H I 0 PAGE: 109 ZONE NUMBER: 089
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATION BLOCK**REF.DWG.NO.004-B27 239000 8".Sl-2407-1A PEHETRATIOH
¹11-TO PIPE C-F C5.21 PT HDE 3.3-326 UT 45 AX HDE 5'-31 UT 45 CIRC NDE 5.4-31 UT 60 AX HDE 5.4-31 C C---11-2-88 PT COMPLETE C---11-3-88 UT COMPLETE C-C.**UT-41**239200 8".Sl-2407-1 PIPE-TO-ELBOW C-F C5.21 PT HDE 3.3-217 UT 60 AX HDE 5.4-14 Ul'5 AX NDE 5.4-15 UT 45 CIRC NDE 5.4-15 C C---10-11-88 PT COMPLETE: 10 17-88 Ul'C-COMPLETE, ROOT AND COUNTERBORE GEOMETRY-C-C-**U'f-41**400 8"-SI-2407.2 ELBOW-TO-PIPE C-F C5.21 PI'DE 3.3-216 UT 60 AX NDE 5.4-14 UT 45 AX NDE 5.4-15 UT 45 CIRC NDE 5.4-15 C C---10-11-88 PT COMPLETE: 10-17-88 UT-C-COMPLETE(ROOT GEOMETRY C-C-**O'I/1**240600 8"-SI-2407-8 TEE-TO-PIPE C-F C5.21 Pi'DE 3.3-215 UT 45 AX NDE 5.4.15 UT 45 CIRC HDE 5.4.15 UT 60 AX NDE 5.4-15 C C---10-11-88 PT COMPLETE: 10-14-88 UT C---COMPLETE: NO EXAM UPSTREAM DUE TO TEE C---CONFIGURATION C.*~UT 41**241000 8"-SI-2407-10A PIPE-TO-VALVE 4-876E C-F C5.21 PT NDE 3.3-226 UT 45 AX NDE 5.4.15 UT 45 CIRC NDE 5.4-15 UT 60 AX NDE 5.4-15 C C..-10-12-88 PT COMPLETE: 10.14-88 UT-C.COMPLETE, ID GEOMETRY: NO EXAM C~-DOWNSTREAM DUE TO VALVE CONFIGURATION
-C-**UT 41**242800 8"-Sl-2407-19 PIPE-TO-ELBOW C-F C5.21 PT HDE 3.3-214 UT 45 AX HDE 5.4-16 UT 45 CIRC NDE 5.4-16 UT 60 AX HDE 5.4-16 C C---10-11-88 PT COMPLETE: 'I0-19-88 UT-C-COMPLETE, COUNTERBORE AND ROOT GEOMETRY C--C-**UT 4 1**
I 4L ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 110 8" SAFETY INJECTION SUPPORTS AND HANGERS H I 0 ZOHE NUMBER: 089
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**5614-H-509 REF.DUG.HO.004.B27 243600 SR-450E F-8 VT-3 LINEAR MECHAHICAL CONNECTION F2.10 19'-3" NDE 4.3.106 C C---10-11-88 VT COMPLETE 244100 4.SIH.97 LINEAR BOX RESTRAINT EL.24'.6" F.B VT.3 F2.10 NDE 4.3.103 C C.--10-11-88 VT COMPLETE DATE: 08/31/89 VISION: 3 LOU PRESSURE SAFETY INJECTION TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IN'IERVAL CLASS 2 COMPONENTS N I 0 PAGE: 111 ZONE NUMBER: 091
SUMMARY
EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.HO.004-829 247300 8"-Sl-2409-1 VALVE 4-863A-TO-ELBSJ C-F PT C5.11 NDE 3.3 139 C C--9 14-88 PT COMPLETE 247500 8"-Sl-2409.3 PIPE-TO-TEE C-F PT C5.11 NDE 3.3 140 C C---9-14-88 PT COMPLETE 248200 8".SI-2409-10 C-F PT VALVE 4.887-TO-REDUCER C5.11 HDE 3.3-169 C C---9 29 88 PT COMPLETE DATE: 08/31/89.VISION: 3 SAFETY INJECTION SUCTION TO PUMP"C TURKEY POINT NUCLEAR PLAN'I UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 2 COMPONENTS PAGE: 112 ZONE NUMBER: 092
SUMMARY
EXAMIHATIOH AREA NUMBER IDENT IF I CATION ASME SEC~XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*" REF.DWG.NO.004-030 248500 6"-SI-2401-1 TEE-TO-PIPE C-F PT C5.11 HDE 3.3-157 C C---9-21-88 PT COMPLETE 248550 6"-SI.2401-1A PIPE-TO.PUP r C.F PT C5.11 HDE 3.3.158 C C---9-21-88 PT COMPLETE 249000 6"-SI-2401-6 ELBOW-TO-REDUCER C-F PT C5.11 NDE 3.3.156 C C---9-21.88 PT COMPLETE 0 0 ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PlANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 113 S.I.TO REFUEL CANAL SUPPORTS AND HANGERS ZONE NUMBER: 094
SUMMARY
EXAMINATIOH AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DMG.NO.004-832 252100 4-ACH-94 U-BOLT RESTRAINT F-C F3.10 VT-3'11.8-88 3.8.89 NDE 4.3 144 CNR-88.4-051 NCR-89.0130 C--C 11-3-88 VT COMPLETE, HEAVILY RUSTED-C STUDS)WASMERS, AND NUTS AT BASE PLATE: C--AREA CLEANED PRIOR TO COHDUCTING THE CORRECTIVE ACTION DEFINED IN NCR: THIS CNF IS CLOSED 252700 4-ACH-88 ANCHOR F-C VT.3 F3.10 NDE 4.3-127 C C-..11-2.88 VT COMPLETE
DATE: 08/31/89 VISION: 3 CONTAINMENT SPRAY PUMP DISCHARGE TURKEY POIHT NUCLEAR PLANT UHIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPOHEN1'S N I 0 PAGE: 114 ZONE NUMBER: 095
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-B33 253100 6"-CS-2401-1 PUMP-TO-ELBSI CF PT CS~11 NDE 3.3.160 C C.--9-23 88 PT COMPLETE e
DATE: 08/31/89 VISION: 3 BORON TANK INLET TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 115 ZONE HUMBER: 097
SUMMARY
EXAMINATION AREA NUHBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DUG.NO.004-B35 257700 6"-CS-2403-2 ELBSl-TO-TANK CF PT C5.11 NDE 3.3.337 C C.--11-22-88 PT COMPLETE DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COHPONENTS PAGE: 116 MAIN STEAH SYSTEM INSIDE CONTAINMENT LOOP A ZONE NUMBER: 099 SUMHARY EXAMINATION AREA NUHBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEH NO HETHOO PROCEDURE N I 0 S ONGT I'SEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.OWG.NO.004-B37 259100 26"-HSA-2401-9LS C-F LONG SEAH-DOWNSTREAM OF WELD C5~22 MT NDE 2.2-51 UT 45 AX NDE 5.2-40 UT 45 CIRC NDE 5.2-40 UT 60 AX NDE 5.2-40 C C---10-26-88 MT COHPLETE: 11-15-88 UT C---COHPLETE: 2.5T EXAHINED AT MELD C-.-26"-HSA-2404-1 C-**UT 21*>>
F$P;0 ATE: 08/31/89 VI SION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 117 MAIH STEAM INSIDE CONT.LOOP A SUPPORTS&HANGERS N I 0 ZONE NUMBER: 099 SUHMARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.HO.004-B37 259300 4.MSH-21 DUAL SPRING HANGER WITH PIPE SUPPORT 54<10n F C F3.10 VT-3 11-8-88 2.28.89 3-18-89 VT-3 NDE 4.3-140 CNR-88-4-049 NCR-88.0187 WA89031 51601 48 NOE 4.3-89-643 C C-C-C 11-3-88 VT COMPLETE, LOOSE NUT, LOWER C PIPE SUPPORT HAS 2 CRACKED WELDS ON C SMALL SPRING CAN SIDE;HCR-88-0187 ISSUED FOR CRACKED WELDS, ENGINEERING ACCEPI'ED AS-IS, PWO WA890315160148 I SSUED FOR LOOSE HUT t REEXAM OF TIGHTENED NUT ONLY 259400 4-MSH-21 F-C VT-4 NDE 4.3-140 DUAL VARIABLE SPRING HANGER F3.50 11-8-88 CNR 88-4-049 54'0" 11-11-88 HCR-88 0187 C C---11-3-88 VT COMPLETE ENGIHEERING
-C EVALUATION THE SETTINGS ARE C---APPROXIMATELY ALIGNED WITH COLD LOAD ACCEPT AS-IS DATE: 08/31/89 VISION: 3 TURKEY POINI'UCLEAR PLANI'NIT 4 IHSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)~SECOND PERIOD~SECOHD INTERVAL CLASS 2 COMPONENTS PAGE: 118 MAIN STEAM SYSTEM INSIDE CONTAINMENT LOOP B ZONE NUMBER: 100
SUMMARY
EXAMIHAT ION AREA NUMBER IOEHT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONG7 T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATION BLOCK**REF.O'WG.NO.004-B38.259600 31"-MSB.2402-1A NOZZLE-TO-REDUCER C-F C5.21 MT UT 45 AX UT 45 CIRC UT 60 AX 10-27.88 10-31-88 1-6-89 1.10-89 MT 9.5 3-13-89 HDE 2.2-44 NDE 5.2-15 HDE 5.2-15 NDE 5.2-15 CNR.88.4.037 NCR.88-0166 NCR.N.89.0040 PS89-029 H89.261 HIS-2 C-C C-C-C--C-C-C 10-24-88 MT COMPLETE, 15 LINEAR INDICATIOHS, BELIEVED TO BE FORGING AHOMOLIES, INDICATIONS REMOVED, VERIFIED BY MT: 10-27-88 UT COMPLETE**UT-17~*260300 26"-MSB-2402-7 C-F MT HDE 2.2.55 UT 45 AX NDE 5.2-16 UT 45 CIRC HDE 5.2-16 UT 60 AX NDE 5.2-16 C C...10-29.88 MT COMPLETE:10.27-88 UT-C COMPLFTE, ID GEOMETRY C--C-**UT-21**260350 26"-MSB-2402-7LS LONG SEAM C-F C5.22 MT HDE 2.2-52 UT 45 AX HDE 5.2-42 UT 45 CIRC NDE 5.2.42 UT 60 AX HDE 5.2-42 C C---10.19.88 MT COMPLETE C---11-15-88 UT COMPLETE C C-**UT 21**
0 DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OU'IAGE 1<1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 119 MAIN STEAM INSIDE CONT.B SUPPORTS 8 HANGERS ZONE NUHBER: 100
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RS EH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~*REF.DUG.NO.004-B38 260400 4-MSH-20 SPRING SUPPORT F-C VT-3 F3.10 HDE 4.3 221.E C---12-9-88 VT COMPLETE: ADDITIONAL EXAM 260500 4-MSH-20 SPRING SUPPORT F-C VT-4 NDE 4.3 221 E C--.12-9.88 VT COMPLETE ADDITIONAL EXAM: F3.50 REQUIRES VERIFICATION OF SETTINGS ATE: 08/31/89 VI SION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECI'ION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 120 MAIN STEAM SYSTEM INSIDE CONTAINMENT LOOP C H I 0 ZONE HUMBER: 101
SUMMARY
EXAMIHATIOH AREA NUMBER IDENTIFICATIOH ASME SEC~XI CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R"~CALIBRATION BLOCK**REF.DWG.NO.004-839 261650 26"-MSC-2403-9LS LONG SEAM C-F C5.22 MT HDE 2.2-49 UT 45 AX NDE 5.2 41 UT 45 CIRC NDE 5.2 41 UT 60 AX NDE 5.2-41 C C-.-10-25-88 MT COMPLETE C---11-15-88 UT COMPLETE C-C-**UT-21**
DATE: 08/31/89 VISION: 3 TURKEY POIHI'UCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS MAIN STEAM INSIDE CONT.LOOP C SUPP.B HANGERS ZONE NUMBER: 101
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-839 261900 4-MSH-22A SPRING SUPPORT 54 i 10ii F-C VT-3 HDE 4.3-231 C C---12-12-88 VT-3 COMPLETE F3.10 262000 4-MSH-22A SPRING SUPPORT F-C Vr-4 F3.50 NDE 4.3-231 C C---12.12.88 VT-4 COMPLETE l!cK A%I 0 TE: 08/31/89 I SION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORI'ABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 122 HAIN STEAM SYSTEM OUTSIDE CONTAINMENT LOOP A ZONE NUMBER: 102 SUMHARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO HETHOO PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK">>REF.DWG.NO.004.040 262200 26".HSA-2404.1 PENETRATION(26A)
-TO-PIPE PLATFORM C.F C5.21 HT UT 45 AX UT 45 CIRC UT 60 AX UT 0 DEG 11-8-88 11-11-88 1-6.89 1-10.89 Hl'.5 4-12-89 NDE 2.2-60 NDE 5.2-17 NDE 5.2-17 NDE 5.2 17 NDE 5.18-1 CNR-88-4-043 NCR-88-0183 NCR.N-89.0032 PS89-027 W-89-074 NIS 2 C C.C-C-C-C-C-C-C-C C C-C 10-26-88 MT COMPLETE, 7 LINEAR INDICATIONS, 5 REJECTABLE, REMOVED BY GRINDING: 10-28-88 UT COHPLETE, SLAG (ACCEPTABLE)
AND ROOT GEOMETRY**UT-21**250 26-MSA-2404-1LS C.F PIPE-LONG SEAH BET'WEEN WELD C5.22 9 AND 1 HT NDE 2.2.51 UT 45 AX NDE 5.2-40 UT 45 CIRC NDE 5.2 40 UT 60 AX NDE 5.2-40 UT 0 DEG NDE 5.18 1 MT NDE 2.2.77 C C...10.26-88 HT COHPLETE, 2.5T EXAMINED AT C--WELD 26"-HSA-2404-1:
11-3-88 MT C---COMPLETE, 2.5T EXAHINED AT WELD C---26"-HSA-2404-5:
11-15-88 UT COHPLETE C---**UT-2'I**
C-262300 26".HSA-2404-2 PIPE-TO-W.O.L.C-F MT NDE 2.2.50 C5.31 UT 0 DEG NDE 5.18.1 C C---10.26-88 HT COHPLETE C-262400 26"-HSA.2404.3 PIPE-TO-W.O.L.CF'T NDE 2.2.50 C5.31 UT-T 0 DEG"NDE 5.18.1 C C---10.26-88 HT COHPLETE C 262500 26"-HSA-2404-4 PIPE-TO-'W.O.L.C-F HT NDE 2.2-50 C5.31 UT-T 0 DEG NDE 5'8.1 C C---10-26-88 MT COMPLETE C-262600 26"-HSA-2404-5 PIPE-TO.VALVE 4-2604 C-F C5.21 HT NDE 2.2.74 UT 45 AX NDE 5.2-36 UT 45 CIRC NDE 5.2.36 UT 60 AX NDE 5.2.36 UT-T 0 DEG NDE 5.18-1 C C--.11-3-88 HT COHPLETE: 11-7-88 UT-C-COMPLETE, COUNTERBORE AND ROOT GEOHETRY: C---LIHITED SCAN DOWNSTREAM DUE TO VALVE-C-CONFIGURATION C.--**UT.21**
DATE: 08/31/89 VISION: 3 TURKEY POINI'UCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INI'ERVAL CLASS 2 COHPONENI'S PAGE: 123 HAIN STEAM SYSTEM OUTSIDE CONTAINMENT LOOP A ZONE NUHBER: 102 SUHHARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO HETNOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**REF.DWG.NO.004-B40 262800 12"-HSA-2401-2 TEE-TO-FLANGE C-F MT C5.21 Ur NDE 2.2.64 NDE 5.2 C C-10 26-88 MT COHPLETE: LIHITED EXAM DUE TO BOLTING INTERFERENCE REF.DWG.NO.004-843 263200 12"-HSA.2402-1 W.O.L.-TO-TEE CF MT C5.31 NDE 2.2-74 C C---11-3-88 HT COMPLETE 263600 12".HSA-2402.6 t TEE-TO-CAP C-F HT C5.21 UT NDE 2.2.50 P C---10.26-88 HT COHPLETE NDE 5.2 REF.OWG.NO.004-B46 263800 6".HSA-2401-2 PIPE.TO-VALVE 4-10-001 CF HT C5.11 NDE 2.2-50 C C-.-10-26.88 MT COMPLETE Js J/
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 124 MAIN STEAM SYSTEM OUTSIDE CONTAINMENT LOOP B ZONE NUMBER: 103
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEM A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK~*REF.DWG.NO.004-841 264300 26"-MSB-2405-1 PENETRATION(26B)
-TO-PIPE C F C5.21 MT NDE 2.2-52 Ul'5 AX NDE 5.2-30 UT 45 CIRC NDE 5.2.30 UT 60 AX NDE 5.2-30 UT.T 0 DEG NDE 5.18-1 C C-C-C--C C-10-19-88 HT COMPLETE: 10-28-88 UT COMPLETE, ROOT GEOMETRY AND ACCEPTABLE SLAG C""UT-21*" 264350 26".MSB-2405-1LS C-F PIPE-LONG SEAM BETWEEN WELD C5.22 1 AND 5 HT NDE 2.2-48 MT NDE 2.2-52 UT-T 0 DEG NDE 5.18-1 UT 45 AX NDE 5.2-42 Ul'5 CIRC NDE 5.2.42 UT 60 AX NDE 5.2.42 C C---10-25-88 MT COMPLETE, 2.5T OF LONG SEAH C--EXAMINED AT WELD 5: 10.19-88 HT C---COMPLETE, 2.5T AT WELD 26"-MSB-2405-1:
C---11-15-88 UT COMPLETE**U T.21**C-400 26"-MSB.2405.2 PIPE-TO-W.O.L.C-F C5.21 MT NDE 2.2-71 UT-T 0 DEG NDE 5.18-1 UT 45 AX NDE 5.2-37 UT 45 CIRC NDE 5.2-37 UT 60 AX NDE 5.2.37 C C..-11-7-88 MT COMPLETE: 11-8.88 UT C---COMPLETE, ID GEOMETRY NO EXAH ON C-..WELDOLET DUE TO ITS CONFIGURATION C--C-**UT-21**264500 26"-HSB-2405-3 PIPE-TO-W.O.L.C-F C5.21 MT NDE 2.2.72 UT-T 0 DEG NDE 5.18.1 UT 45 AX NDE 5.2-37 UT 45 CIRC NDE 5.2-37 UT 60 AX NDE 5.2 37 C C-.-11-3-88 MT COMPLETE: 11-8.88 UT C-..COHPLETE, IO GEOMETRY: NO EXAH ON C---WELDOLET DUE TO ITS CONFIGURATION C-C-<<*UT-21**264600 26".MSB-2405-4 PIPE-TO-W.O.L.C-F C5.21 MT NDE 2.2.66 UT-T 0 DEG NDE 5.18.1 UT 45 AX NDE 5.2-37 UT 45 CIRC NDE 5.2-37 UT 60 AX NDE 5.2-37 C.--C 11-3.88 MT COMPLETE (2)LINEAR IND C--LOCATEO ON HEADER SIDEI ACCEPTABLE:
C---11-8-88 UT COMPLETE, ID GEOMETRY: NO C---EXAM FROH WELDOLET DUE TO ITS-C CONFIGURATION
- 0 T-21*i 264700 26".MSB-2405-5 C.F C5.21 MT NDE 2.2.48 UT 45 AX NDE 5.2-24 UT 45 CIRC NDE 5.2.24 UT 60 AX NDE 5.2.24 UT-T 0 DEG NDE 5.18.1 C C.10.25.88 MT COMPLETE: 10 29-88 UT-C COMPLETE, IO GEOHETRY: LIHITEO SCAN C---DOWNSTREAM DUE TO VALVE CONFIGURATION(-C-LIMITED EXAM ON MELO DUE TO PRESENCE OF C-.-TACK WELDS**UT 21*>>
D ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1 988)i SECOND PER I 00 i SECOND I N'TERVAL CLASS 2 COMPONENTS PAGE: 125 MAIN STEAM SYSTEM OUTSIDE CONTAINHENT LOOP B ZONE NUMBER: 103 SUHMARY EXAHINATION AREA NUHBER IDENI'IFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**REF.DWG.NO.004-841 265200 12"-MSB-2403-4 TEE-TO-FLANGE C-F HT C5.21 UT NDE 2.2-65 P C---10-19-88 MT COMPLETE: LIMITED EXAH DUE NDE 5.2 TO FLANGE BOLTING INTERFERENCE 265300 12"-HSB-2403.5 TEE-TO CAP C-F HT C5.21 UT NDE 2.2-42 P C---10-19 88 HT COHPLETE NDE 5.2 265900 6".HSB-2402-1 N.O.L.-TO-PIPE C-F MT C5.11 NDE 2.2-70 C C---11-7-88 MT COHPLETE 0 e ATE: 08/31/89 VISIOH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPEC'TION FINAL REPORI'ABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENI'S PAGE: 126 MAIN STEAM OUI'SIDE COHTMT.LOOP B SUPP.8 HANGERS ZONE NUMBER: 103
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R<<~CALIBRATION BLOCK**REF.ONG.HO.004-841 266400 B SINGLE ACTING RESTRAIHT F-C F3.10 VT-3 11-11-88 1-31-89 VT-3 HDE 4.3-170 CNR.88-4-065 PS89-149 9.9-3.1 M89-721 C---C 11-9-88 VT COMPLETE(ALL MATING SURFACES-C FROM SUPPORT TO PIPE ARE RUSTY, CONCRETE C---BROKEN AND MISSING;REPAIRED CONCRETE, C---REPAIHI'ED AND REEXAMINED ON 2-13.89 BY CONSTRUCTIOH BACKFIT
DATE: 08/31/89 VISION: 3 TURKEY POINI'UCLEAR PLANT'NIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COHPOHEHTS PAGE: 127 MAIN STEAH SYSTEM OUTSIDE COHTAINHEHT LOOP C ZOHE NUHBER: 104 SUHMARY EXAHIHATION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH NO HETHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK>>>>REF.DWG.NO.OOC-BC2 266500 26>>-HSC-2406.1 C-F PENETRATION (26C>-TO-PIPE C5.21 HT NDE 2.2-49 UT 45 AX NDE 5.2-18 UT 45 CIRC NDE 5.2 18 UT 60 AX NDE 5.2-18 UT-T 0 DEG HDE 5.18-1 C C---10-25-88 HT COHPLETE: 10 29-88 UT-C COMPLETE, ACCEPTABLE SLAG C C C-.-*>>UT-21**266550 26".MSC~2406-1LS C-F PIPE-LONG SEAH BETWEEN WELD 1 C5.22 AHD 9 MT NDE 2.2.49 UT 45 AX HDE 5.2-41 UT 45 CIRC NDE 5.2-41 UT 60 AX NDE 5.2.41 UT-T 0 DEG HDE 5.18-1 Hi'DE 2.2-78 C C---10-25-88 MT COHPLETE, 2.5T AT'WELD NO.C---1: 11-3-88 HT COHPLETE, 2.5T AT WELD C---5:11-15-88 UT COHPLETE C->>>>UT-2]>>>>C-6600 26".HSC.2406.2 PIPE-TO-W.O.L~C-F C5.21 MT NDE 2.2.49 UT-T 0 DEG HDE 5.18 1 C C---10-25-88 HT COMPLETE C-266700 26"-HSC.2406-3 PIPE.TO.W.O.L.PLATFORM C.F C5.21 HT UT.T 0 DEG 11-8-88 11-11-88 1-16.89 1-7-89 UI'-T HT 9.5 4-12-89 HDE 2.2-59 NDE 5.18.1 CNR-88.4-042 NCR.88.0182 NCR.H.89.0029 PS89-025 M89-182 W.89.073 NIS-2 C C C-C-C-C-C-C-C 10-25-88 MT COMPLETE(LINEAR)S!ZE=.7" REJECTED, REPAIRED BY LIGHT GRINDING C 266800 26".HSC-2406.4 PIPE-TO-W.O.L.C-F C5.21 HT UT T 0 DEG 5.26.89 5-26.89 5-27-89 5-27.89 HDE 2.2.67 HDE 5.18.3 CNR-88.4-076 NCR-89-0227
'WA890527165108 W89-1331 C---C 11-3-88 MT COHPLETE, 1 LINEAR, SIZE=.7", C---REJECT;REPAIRED BY LIGHT GRINDING.C-0 ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 128 HAIN STEAM SYSTEH OUTSIDE CONTAINMENT LOOP C ZONE NUMBER: 104 SUHHARY EXAMINATION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE T N I 0 ONGT RSEN E I 0 E REHARKS C G H R**CALIBRATION BLOCK**REF.DWG.NO.004-042 266900 26"-HSC.2406.5 C-F PIPE-TO-VALVE (POV-2606)
C5.21 HT NDE 2.2.73 UT 45 AX NDE 5.2-35 UT 45 CIRC NDE 5'-35 UT 60 AX NDE 5.2-35 UT-T 0 OEG NDE 5.18-1 C C---11-3-88 Hl'OHPLETE:
11-7-88 UT-C-COHPLETE, COUNTERBORE AND ROOT GEOHETRY:-C-LIHITED EXAH DmINSTREAH DUE TO VALVE C-CONFIGURATION C-.**UT-21~>>
I TE: 08/31/89 ISION: 3 TURKEY POINT HUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 2 COMPONENI'S PAGE: 129 S'TEAM GEN.BLOWDOWN FROM GEN.4E210A SUPP.&MANGE ZONE NUMBER: 105
SUMMARY
EXAMINATIOH AREA NUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R*~CALIBRATION BLOCK>>" REF.DWG.NO.004-849 271900 H-420.09 RESTRAINT (BOX W/WELDED LUGS)RIGID F-C Vl'-3'3.10 HDE 4.3-226 C C--12-9-88 REEXAMINATION PER IWF-2430(B)
COMPLETE 272700 H-420-01 F-C VT-3 NDE 4.3-225 RESTRAINT (BOX W/WELDED LUGS)F3.10 12-13-88 CNR-88 4 075 RIGID 3-17-89 NCR-89.0132 C---C 12-9.88 VT COMPLETE)REEXAMINATION PER-C IWF-2430(B)g ALL COHDITIOHS
'WERE C---CORRECTEO BUT CHIPPED CONCRETE;3-18-89 ENGINEERIHG OISPOSITIOH ACCEPTABLE AS-IS ATE: 08/31/89 VISION: 3 STEAM GENERATOR BLOWDOWN LOOP B IN CONT.TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COHPONENTS PAGE: 130 ZONE NUHBER: 106 SUHHARY EXAMINATION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~~REF.DWG.NO.004-BSO 272800 6-BOB-2402-1 REDUCER-TO.VALVE (SGB-4-003)
C F C5.21 HT NDE 2.2.43 UT 45 AX NDE 5.2-38 UT 45 CIRC NDE 5.2-38 UT 60 AX NDE 5.2.38 C C---10-21.88 HT COHPLETE: 11-1-88 UT-C-COMPLETE, ROOT AND ID GEOMETRY: LIHITED C---SCAN OOWNSTREAH DUE TO VALVE C-CONFIGURATION
- OUT 22**273200 6".BDB-2402-5 VALVE 4-004-TO-PIPE C-F C5.21 MT NDE 2.2-43 UT 45 AX NDE 5.2-38 UT 45 CIRC NDE 5.2-38 UT 60 AX NDE 5.2-38 C C...10-21-88 HT COMPLETE: 11-1-88 UT C---COMPLETE(ROOT GEOHETRY: LIHITED SCAN C---UPSTREAH DUE TO VALVE CONFIGURATION C-**UT 400 6"-BDB-2402.7 TEE-TO-PIPE C-F C5.21 HT NDE 2.2.43 UT 45 AX NDE 5.2.38 UT 45 CIRC NDE 5.2-38 UI'0 AX NDE 5.2.38 C C-..10-21-88 MT COHPLETE: 11-1-88 UT-C.COHPLETE, ROOT GEOHETRY C--C-**UT-22**273800 6"-BDB-2402-11 ELBOW-TO-PIPE C F C5.21 HT NDE 2.2-69 UT 45 AX NDE 5.2.34 UT 45 CIRC NDE 5.2-34 UT 60 AX NDE 5.2.34 C C.--11.8.88 HT COHPLETE: 11-1-88 UT-C-COHPLETE, ROOT GEOHETRY C---C-**UT.22**274300 6".BDB.2402-16 PIPE-TO-ELBOW C.F C5.21 H'I NDE 2.2-45 UT 45 AX NDE 5.2-39 UT 45 CIRC NDE 5.2-39 UT 60 AX NDE 5.2-39 C C---10.24-88 HT COHPLETE: 10-31-88 UT-.C-COHPLETE, ID GEOHETRY C--C-""UT-22**274500 6"-BDB-2402-18 PIPE-TO.REDUCER C-F C5.21 HT NDE 2.2-45 UT 45 AX NDE 5.2.39 UT 45 CIRC NDE 5.2-39 UT 60 AX NDE 5.2-39 C C---10-24-88 HT COHPLETE: 10-31.88 UT-C-COMPLETE, ROOT GEOHETRY C--C-**UT-22*+
DATE: 08/31/89 VISION: 3 STEAM GENERATOR BL(%DOWN LOOP 8 IN CONT.'TURKEY POINT NUCLEAR PLAHI'NIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 131 ZONE NUMBER: 106
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-B50 274600 6u BDB 2402 19 REDUCER TO-PEH.288 C-F C5.21 MT HDE 2.2-45 UT 45 AX NDE 5.2-39 UT 45 CIRC HDE 5.2.39 UT 60 AX NDE 5.2.39 C C---10-24-88 MT COMPLETE: 10-31-88 UT.C-COMPLETE, ID AND ROOT GEOMETRY C--C-"*UT-22"*
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 132 STEAM GEH.BLOuDOUN FROM GEH.4E210B SUPP.5 HANGE ZONE NUMBER: 106
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R<<*CALIBRATION BLOCK**REF.DWG.NO.004-850 274700 H.421-06 BOX RESTRAINT F-C VT-3 HDE 4.3.161 C C--.11-5-88 VT COMPLETE F3.10 e
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT'TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 133 STEAM GENERATOR BLOWDOWN LOOP A OUTSIDE CONT.ZONE NUHBER: 108
SUMMARY
EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**REF.DWG.NO.004-852 278800 6"-BDA-2404-FW-50 REDUCER-TO-PIPE C-F C5.21 MT NDE 2.2-56 UT 45 AX NDE 5.2-19 UI'5 CIRC NDE 5.2-19 UT 60 AX NDE 5.2-19 C C---10-31-88 HT COHPLETE: 11-3-88 UT-C-COMPLETE, ROOT GEOHETRY C C-%*UT 22**279200 6"-BDA-2404-FW 45 VALVE SGB-4-007-TO-PIPE C-F C5.21 HT NDE 2.2-56 UT 45 AX NDE 5.2-19 UT 45 CIRC NDE 5.2-19 UT 60 AX NDE 5.2-19 C C-..10-31-88 HT COHPLETE: 11-3-88 UT-C.COHPLETE, ROOT GEOHETRY: NO SCAN C---UPSTREAH DUE TO VALVE CONFIGURATION
-C-**UT-22~*
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLAHT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 134 STEAM GEN.BL(ND(RN OUTSIDE CONTMT.4E210A SUPP.&ZONE NUMBER: 108
SUMMARY
EXAMI HAT I ON AREA HUMBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM HO HETHOO PROCEDURE H I 0 S ONGT T RSEH A E I 0 E, REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-852 279500 H-423.16 RIGID RESTRAINT F-C V'I-3 F3.10 NDE 4.3-168 C C---11-9-88 VT COMPLETE DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 135 STEAM GENERATOR BLOWDOWH LOOP B OUTSIDE CONT.ZONE NUMBER: 109
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-853 279600 6"-BDB-2405-FW-36B REDUCER-TO-'IPE C F C5.21 MT UT 45 AX UT 45 CIRC ur 60 AX 11-8.88 11-11-88 1.16.89 1.10-89 Mf UT THICK 2-28.89 NDE 2.2-63 HDE 5.2-20 NDE 5.2-20 NDE 5.2-20 CHR.88.4-046 HCR.88.0186 HCR.N.89.0033 PS-89-028 9.5 W89.075 M89-184 HIS-2 C---C C-C--C--C-C.C C-C C-C-10.31-88 MT COMPLETE 1 LINEAR IHDICATIOH, SIZE"-.8", REJECTED'NF-88-4-046 ISSUEDI REMOVED BY GRINDING ON 3-10-89: 11-3-88 UT COMPLETE, ROOT GEOMETRY**UT.22**0000 6"-808-2405.FW-42B PIPE-TO-VALVE<SGB-4-62758)
C-F C5.21 MT NDE 2.2.57 UT 45 AX NDE 5.2.20 UT 45 CIRC HDE 5.2-20 UT 60 AX NDE 5.2-20 C C---10-31-88 MT COMPLETE: 11-3 88 UT-C-COMPLETE, ROOT AHD OD GEOMETRY: HO SCAN C--DOWHSTREAM DUE TO VALVE CONFIGURATION
-C*+UT 22**
DATE:, 08/31/89 VISION: 3 MAIN FEEDWATER LOOP A TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IHTERVAI.CLASS 2 COMPONENTS PAGE: 136 ZONE NUMBER: 111
SUMMARY
EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD N I 0 S ONGT T RSEH A E I 0 E REMARKS PROCEDURE T C G M R""CALIBRATION BLOCK*" REF.DWG.NO.004-855 280700 14"-F'WA-2401-1 VALVE (CV-2900)-TO ELBOW C-F C5.21 Ht NDE 2.2.58 UT 45 AX NDE 5.2-33 UT 45 CIRC NDE 5.2-33, UT 60 AX NDE 5.2-33 C C---11-1-88 MT COHPLETE: 11-3-88 UT-C-COMPLETE, COUNTERBORE(CHILL RING, AND C---ROOT GEOMETRY: HO EXAM UPSTREAM DUE TO-C VALVE CONFIGURATION
- UT-20**281000 14"-FWA-2401 4 PIPE-TO-ELBOW C.F C5.21 MT UT 45 CIRC Ut 60 AX UT 45 AX 11-8-88 11-11-88 1.6-89 1-10.89 MT UT THICK 2-28-89 NDE 2.2-61 NDE 5.2.28 NDE 5.2-28 NDE 5.2-28 CHR-88 4-044 NCR.88-0184 NCR.N-89.0027 PS.89.023 9.5-W89-099 M89-207 NIS 2 C C--C-C C-C C-C 10-27-88 Mt COMPLETE, LINEAR, SIZE=2.1", REJECT, REPAIR BY GRINDING, CLOSED ON 3-9-89: 11-4.88 UT COMPLETE, ROOT, CHILL RING, AND COUNTERBORE GEOMETRY C**UT-20*>>C C C 283100 18"-FWA-2401-FW-1A REDUCER-TO-NOZ.EXT~C-F C5.21 MT NDE 2.2.47 Ut 45 AX NDE 5.2-22 UT 45 CIRC NDE 5.2-22 UT 60 AX NDE 5.2.22 C C-..10.26-88 MT COMPLETE: 10.27-88 UT 60 C--.COMPLETE, ID GEOMETRY: 11-2-88 UT 45 C~--COMPLETE-C-*>>Ut 29>>*283200 18"-FWA-2401-A-1 NOZ.EXT.-TO-NOZZLE C.F C5.21 MT NDE 2.2-47 UT 45 AX NDE 5.2-26 UT 45 CIRC NDE 5.2.26 UT 60 AX NDE 5.2-26 C C.--10.26-88 MT COMPLETE: 10.28.88 UT-C-COMPLETE, 1 SINGLE INDICATION DETEC'TED C BY TWO ANGLE FROM TWO DIRECTIONS,-C-DETERMINED TO BE ACCEPTABLE SLAG>>>>Ut-10>>>>283300 AUGMENTED EXAM FROM NOZ.RAMP TO 1 DIA.ON ELBOW UT 45 AX Ut 60 AX Ut 45 AX UT 60 AX NDE 5.16-9 NDE 5.16-9 NDE 5.16.13 NDE 5.16-13 A C---11-2-88 Ut COMPLETE, 18" SIDE: 10-27-88 C---UT COMPLETE(14" SIDE C-C->>>>UT-20(Ul'-29**
DATE: 08/31/89 VISIOH: 3 MAIN FEEDWATER LOOP A SUPPORTS&HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLESOUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 137 ZONE NUMBER: 111
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004.855 283600 4-FWH-15 SPRING CAN HANGER F-C F3~10 , VT-3 12-12-88 NDE 4.3-219 CNR-88.4-073 C C---12-9-88 REEXAMINATION PER IWF.2420(B)
IH-C NEXT PERIOD COMPLETE)THIS EXAMINATION ALSO VERIFIES CORRECTIVE ACTION WAS PERFORHED 283700 4-F WH-15 SPRING CAN HANGER F-C VT-4 NDE 4.3-219 C C---12-9-88 RECORDED SETTINGS FALL WITHIN F3.50 12.12.88 CNR.88.4.073
---C THE MARKED SETTINGS ON THE PLATE.283800 4.FWH.16 SPRING CAN HANGER F-C VT-3 NDE 4.3-227 F3.10 12-12-88 CNR-88.4.073 C C---12.9.88 REEXAMINATION PER IWF-2430(B)
-C 283900 4-FWH-16 SPRIHG CAH HANGER F-C F3.50 VI'-4 12-12-88 12-21-88 3.10.89 VT.3/4 NDE 4.3-227 CNR.88-4-073 NCR-88-0250 WA890310105452 4.3.227R C---C 12-9-88 REEXAMINATION PER IWF-2430(B)
-C SETTING UNACCEPTABLE, 2-28-89-C ENGINEERING OISPOSITIOH WAS TO CROSS OUT C---OLD H 8 C'WITH A X AND RESTAMP C 9 2625, C H 9 3016, ADJUSTMENT OF SPRING NOT REQUIRED V'
DATE: 08/31/89.VISION: 3 MAIN FEEDWATER LOOP B TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECI'ION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS H I 0 PAGE: 138 ZONE NUMBER: 112
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.Xl CATGY EXAM ITEM HO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-856 285500 14"-FWB-2402-5 ELBOW-TO-PIPE C F C5.21 MT UT 45 CIRC UT 45 AX UT 60 AX 11-8.89 11-11-89 1-16-89 MT TS 9.5 UT THICK 2.28.89 NDE 2.2-62 HDE 5.2-27 HDE 5.2-27 NDE 5.2-27 CHR.BB 4 045 NCR 88 0185 NCR-N-89-0028 W-89-100 M89-208 HIS.2 C-C-C-C--C-C-C C-C-C-C.10-27-88 M'I COMPLETE: 1 LINEAR IND, SIZE 1 0 g REJECTED'EMOVED BY GRINDING: 11-4-88 UT COMPLETE, CHILL RING AND ROOT GEOMETRY**UT-20**285800 14".FWB-2402.8 C-F C5.21 MT UT 45 AX UT 45 CIRC UT 60 AX 11-11.88 12.15.88 1-23.89 1-10.89 MT UT THICK 2-28-89 NDE 2.2-75 NDE 5.2-31 NDE 5.2-31 HDE 5.2-31 CHR-88-4.056 NCR-88-0242 NCR.H-89.0030 PS89-026 9.5 W89-132 M89-245 NIS-2 C C C--C C-C-C-C-C-C 10-27-88 MT COMPLETE, 11 LINEAR INDICATIOHS, REJECT, REPAIRED BY GRINDING, CLOSED 1-23-89: 11-3-88 UT COMPLETE, BACKING BAR GEOMETRY C**UT-20**C 286100 14"-FWB.2402-11 ELBOW-TO-PIPE C-F C5.21 MT UT 45 AX UT 45 CIRC UT 60 AX VT.1 12.1-88 HDE 2.2-46 NDE 5.2-31 HDE 5.2-31 NDE 5.2-31 NDE 4.1.89 CHR 88 4-067 C C---10.26.88 MT COMPLETE(GOUGE,--C-CHF-88-4-067 ISSUED: 11-3-88 UT C-.-COMPLETE, BACKING BAR GEOMETRY-C---C**UT-20**-C 286700 18"-FWB-2402-FW-19 REDUCER-TO-NOZ~EXT.C-F UT 45 AX HDE 5.2-21 A C--.10.27-88 UT COMPLETE, ID GEOMETRY C5.21 UT 45 CIRC NDE 5.2.21 C-UT60AX NDE5221'-C-*IUT 204*
DATE: 08/31/89 VISION: 3 MAIN FEEDWATER LOOP 8 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IN'IERVAL CLASS 2 COMPONENTS PAGE: 139 ZONE NUMBER: 112
SUMMARY
EXAMINATION AREA NUMBER IDEHT I F I CAT I OH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004.856.286900 AUGMENTED EXAM FROM NOZZLE RAMP TO 1 DIA.ON ELB(N UT 45 AX HDE 5.16-10 UT 60 AX NDE 5.16.10 UT 45 AX HDE 5.16.12 UT 60 AX HDE 5.16-12 A C---11-2.88 UT COMPLETE, 18" SIDE: 10-26-88 C---UT COMPLETE, 14" SIDE C C**UT-20**
,
ATE: 08/31/89 VISION: 3 HAIN FEEDLIATER LOOP B SUPPORTS 8 NANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPOR1'ABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 140 ZONE NUHBER: 112 SUHHARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO HETHOD PROCEDURE N I 0 S ONGT T RSEM A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK~*REF.DUG.NO.004-056 287000 4-F'NN-42 STRU'I HANGER F-C VT-3 F3.10 NDE 4.3.115 C C---10-31-88 VT COHPLETE, SURFACE RUST AND PAINT FLAKING OFF rt I ATE: 08/31/89 VISION: 3 MAIN FEEDWATER LOOP C TURKEY POINI'UCLEAR PLANT UNIT 4 INSERVICE IHSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 141 ZONE NUMBER: 113
SUMMARY
EXAMINATION AREA NUHBER IDENT I F I CAI'ON ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R<<*CALIBRATION BLOCK**REF.DWG.NO.004-B57 289000 14"-FWC.2403-FW-3C ELBOW-TO PIPE C-F C5.21 MT NDE 2.2 40 UT 45 AX NDE 5.2-32 UT 45 CIRC NDE 5.2-32 Uj 60 AX NDE 5.2-32 C C--, 10-3-88 MT COMPLETE: 10-27.88 U'I-C-COMPLETE(COUHTERBORE AND ROOT GEOMETRY C--C-**UT.20*+289100 14"-FWC-2403-FW-2C PIPE TO-REDUCER C.F C5.21 MT NDE 2.2.40 UI'5 AX NDE 5.2.32 UT 45 CIRC NDE 5.2.32 UT 60 AX NDE 5.2-32 C C.--10-3-88 MT COMPLETE C.--'I0.27-88 UT COMPLETE C-C-**U'I-20**
00 18"-FWC-2403-FW-1C REDUCER-'TO-NOZ.EXT.C-F C5.21 MT NDE 2.2.40 Uj 45 AX NDE 5.2-23 U'I 45 CIRC NDE 5.2.23 UT 60 AX NDE 5.2.23 C C.--10.3-88 MT COMPLETE: 11-2-88 UT-C-COMPLETE, ROOT AND ID GEOMETRY C--C-**UT-29**289300 18"-FWC-2403-C-1 NOZ.EXT.-TO-NOZZLE C-F C5.21 MT NDE 2.2.41 UT 45 AX NDE 5.2.25 UT 45 CIRC NDE 5.2-25 UT 60 AX NDE 5.2.25 C---C 10-3-88 MT COMPLETE)(3)LINEAR IND.C---(.15"), (.10"), (.15")ALL ACCEPTABLE:
C---10-28.88 UT COMPLETE C-**UT 29**289400 AUGMEN'TED EXAM FROM NOZ.RAHP TO 1 DIA ON ELBOW Uj 45 AX NDE 5.16.8 Uj 60 AX NDE 5.16.8 UT 45 AX NDE 5.16.11 UT 60 AX NDE 5.16-11 C C---11-2.88 UT COMPLETE, 18" SIDE: 10-27.88 C---UT COMPLETE, 14" SIDE C-C-**UT-20(UT-29~*
ATE: 08/31/89 VI SION: 3 FEEDWATER BYPASS LINE LOOP B TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IN'IERVAL CLASS 2 COMPONENTS PAGE: 142 ZONE NUMBER: 115
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATION BLOCK~*REF.DNG.NO.004-859 291400 6"-FM-2402-5 PIPE.TO-W.O.L.I C-F MT C5.11 NDE 2.2-53 R1 C C---10.27-88 MT COMPLETE ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONEN'IS PAGE: 143 AUXILIARY FEEDWATER LOOP B SUPPORTS&HANGERS H I 0 ZONE NUMBER: 115
SUMMARY
EXAMINATION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-B59 291500 4-FWH-4 VARIABLE SPRIHG SUPPORT PLATFORM F C F3.10 VT-3 11.8-88 1-6-89 3.8.89 VT 10.23 VT-3 4-7.89 NDE 4.3-116 CNR-88.4.039 NCR-H.89.0039 PS89-301 M89-1425 M89.1656 HIS.2 C---C 10-31-88 VT-3 COMPLETE: INCOMPLETE
~-C THREAD ENGAGEMENT:
CNF-88-4 039 ISSUED C---TO PLANT FOR PROCESSING IN ACCORDANCE C---WITH PLANT PROCEDURES; REPLACED PIPE-C CLAMP BOLTS C C-291600 4-FWH-4 VARIABLE SPRING SUPPORT F-C F3.50 VT-4 11-8.88 1-6.89 3-8-89 3-21-89 4-7-89 HDE 4.3-116 CNR.88-4-039 HCR.89.0039 PS89-301 M89-1656 HIS.2-C 10-31-88 VT-4 COMPLETE: LOAD PLATE IS-C MISSING: REPLACED SPRING CAN C C-C-C-
ATE: 08/31/89 VISION: 3 RESIDUAL HEAT EXCHANGER A TURKEY POINI'UCLEAR PLAHT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 144 ZONE NUMBER: 1'17
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*>>REF.DUG.NO.004-V14A 292610 4-RHE-A-7 PAD TO SHELL C-B PT C2.31 HDE 3.3.280 C C..--10-21-88 PT COMPLETE 292620 4.RME-A-8 PAD'TO NOZZLE C-B P'I C2.31 NDE 3.3.279 C C---10.21-88 PI'OMPLETE
DATE: 08/31/89 VISION: 3 EXCESS LETDONN HEAT EXCHANGER TURKEY POIHT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 2 COMPONENTS PAGE: 145 ZONE NUMBER: 119~
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATIOH BLOCK~>>REF.DWG.NO.004-V15 293600 4-LDHX-1, CAP-TO-TUBE SHEET C-A UT 45 AX NDE 5.4.17 C1.30 UT 45 CIRC HDE 5.4.17 UT 60 AX HDE 5.4-17 C-C-10-20-88 UT COMPLETE, COUNTERBORE AND C---ROOT GEOMETRY-C-"*UT 41~"
ATE: 08/31/89 VISIOH: 3 TURKEY POIH'I NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)g SECOND PER IDOL SECOND INTERVAL CLASS 3 COMPONEN'IS PAGE: 146 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 122
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT I OH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C3 294800 4-ACH-193 SPRING HANGER W/LUGS F-C VT-3 F3.10 NDE 4.3-75 C C---9-27-88 VT COMPLETE 294900 4.ACH.193 SPRING HANGER W/LUGS F-C F3.50 VT-4 9-28.88 3-14-89 3-14-89 NDE 4.3-75 CHR.88.4-023 HCR-89.0127 WA890314140805 C-C 9-27-88 VT COMPLETE(RECORDED SETTINGS C H=1.25", C=2", ACCEPTABLE AS-IS C-C-ATE: 08/31/89 VISION: 3 TURKFY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IN'IERVAL CLASS 3 COMPONENTS PAGE: 147 COMPONEHT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 123
SUMMARY
EXAMINATION AREA HUMBER IDENT IF I CAT I OH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATIOH BLOCK**REF.DUG.NO.004-C4 296100 4.ACH-190 SPRING HANGER F-C VT-3 F3.10 NDE 4.3-77 C C---9-27-88 VT COMPLETE 296200 4-ACH.190 SPRING HANGER F-C F3.50 VT-4 9-28-88 3.14-89 4-6-89 NDE 4.3-77 C---C 9-27-88 VT COMPLETE, RECORDED SETTINGS CHR-88.4.025 C OF 1.3" AND 1.375", ACCEPTABLE AS-IS NCR-89 0126 WA 890314 14 1338 0
ATE: 08/31/89 VISION: 3 TURKEY POIN'T NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)i SECOHD PER I OD i SECOND I HTERVAL CLASS 3 COMPONENTS PAGE: 148 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS 2ONE NUHBER: 126
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT'RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C7 297900 4-ACH-19 STANCHION F-C VT-3 F3.10 HDE 4.3-138 C C-..11.4-88 VT COMPLETE 298000 SR-688 ANCHOR F.C VT.3 F3.10 NDE 4.3-139 C C-..11.4.88 VT COMPLETE
DA'IE: 08/31/89 VI SIGH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND IH'IERVAL CLASS 3 COMPONENTS PAGE: 149.COMPONENT COOLING WATER SUPPORTS&HANGERS ZONE NUMBER: 127
SUMMARY
EXAHINAT ION AREA HUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-CB 298200 4-ACH.63 ROD HAHGER F-C VT.3 F3'0 NDE 4.3-135 C C---11-4-88 VT COMPLETE 298700 4-ACH-53 SLIDING STANCHIOH F-C F3.10 VT-3 11-11.88 3-16-89 1-6-89 NDE 4.3.163 CNR 88 4-060 NCR.89.0131 NCR.N-89.0038 C-.-C 11-4.88 VT COMPLETE, LOOSE U-BOLT AND C MISSING NUTS, CORRECTIVE ACTION WILL BE-C ACCOMPLISHED UNDER DEEP 89-173, NO-C FURTHER ACTION REQUIRED DATE: 08/31/89 VISIOH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 150 COMPONENT COOLING SYSTEM SUPPORTS&HANGERS ZONE NUMBER: 129
SUMMARY
EXAMINA'TION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATION BLOCK**REF.DWG.NO.004-C10 299200 4-ACH-49 F-C VI'.3 NDE 4.3-212 E C-..12-9-88 VT COMPLETE, EXPANDED SCOPE EXAM 3 SIDED BOX RESTRAINT W/STEM F3.10 SUPPORT 299300 4-ACH-50 ROO HANGER F-C F3.10 VT-3 2-25-86 VT.3'I2-12-88 3-8.89 3-28-89 VT-3 NDE 4.3-48 NCR-86-18 HDE 4.3-210 CNR-88-4-072 NCR-89-0136 WA890322151909 NDE 4.3.89.0678 C---C-C-C-C C C-C-12-9-88 PERFORMED A REEXAMINATION TO CLOSE OUT MCI-86-18:
LOOSE NUT STILL EXISTS;CLOSED MCI-86-18 AND ISSUED CNF-88-4-072; RETIGH'IENED AND REPLACED NUTS PER NCR-89-0136:
MILL BE REEXAMINED NEXT OUTAGE 400 4.ACH-51 SLIDING STANCHION F-C VT-3 NDE 4.3-211 E C---12-9-88 VT COMPLETE ADDITIONAL EXAM F3.10 0
DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 'I51 COMPONENT COOLING SYSTEM SUPPORTS&HANGERS N I 0 ZONE NUMBER: 130
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R""CALIBRATION BLOCK**REF.DUG.NO.004-C12 299600 4-CCH-27 DOUBLE ACTING RESTRAINT F-C VT-3 HDE 4.3-119 C C---11-1-88 VT-3 COMPLETE F3.10 299700 4-CCH-51 SLIDING STAHCHIOH F.C VT-3 HDE 4.3-178 F3~10 VT-3 HDE 4.3.246 E---C 12-7-88 ADDITIONAL EXAM TO DETERMINE C--EXTENT OF CORROSION:
HO EVIDENCE OF REDUCTION IN THE LOAD BEARING CAPACITY OF THE SUPPORT 299800 4-CCH-52 SLIDING STANCHION F-C F3.10 VT 3 VT-3 HDE 4.3 177 HDE 4.3-247 C--C 12-7-88 REEXAMINATION TO DETERMINE C---EXTENT OF CORROSION(HEAVY BUT HO EVIDENCE OF REDUCIHG THE LOAD BEARING CAPACITY OF THE SUPPORT: CNF-88.4-066 ISSUED TO PLANT FOR ACTION 299900 4-CCH.26 DOUBLE ACTING RESTRAINT F.C F3.10 VT.3 NDE 4.3-120 VT-3 NDE 4.3-180 11-17-88 CNR-88.4-066 VT-3 HDE 4.3-236 C C.--11-1-88 VT.3 COMPLETE, CORROSION:
-C 12-7-88 REEXAMIHATION TO DETERMINE-C EXTENT OF CONDITION C-300000 10-281-1 BOX RESTRAINT F-C F3.10 VT-3 VT-3 NDE 4.3-176 E---C 12-7-88 VT COMPLETE: EXPANDED SCOPE NDE 4.3-234 C--EXAMINATION TO DETERMINE EXTENT OF CORROSION 300100 4-CCH-64'LIDING STANCHION F-C VT-3 NDE 4.3-179 E---C 12-7-88 VT COMPLETE: EXPANDED SCOPE F3.10 VT-3 HDE 4.3-250 C--EXAMINATION TO DETERMIHE EXTENT OF CORROSION DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 152 COMPONENT COOLING SYSTEM SUPPORTS B HANGERS ZONE NUMBER: 131
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-C13 300300 4-ACH-203 U-BOLT RESTRAINT W/CRUSH SADDLE/HELOED F-C VT-3 F3.10 HDE 4.3-93 C C---9.30-88 VT COMPLETE ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UHIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 153 COMPOHENT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 133
SUMMARY
EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.HO.004-C15 301800 4-ACH-205 SPRING HANGER/WELDED F-C VT-3 F3.10 HDE 4.3-76 C C--9-27-88 VT COMPLETE 30'I900 4-ACH-205 SPRING HANGER/NELDED F C F3.50 VT-4 9-28-88 12-18-88 3-15-89 3-19.89 VISUAL VT.3/VT4 NDE 4.3-76 CNR-88.4-024 HCR 88 0210 NCR-N-89-0031 PS89-015 10.23 M89.358 M-89-1481 C-.-C 9.27-88 VT COMPLETE: CHF ISSUED FOR-C VERIFICATION OF SETTINGS: RECORDED-C SETTING 3880, READJUSTED SPRING TO COLO C---LOAD OF 4360 C C.C DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLAN'T UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 154 COMPONENT COOLING SYS'IEM SUPPORTS 8 HANGERS N I 0 ZONE NUMBER: 134
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DMG.HO.004-C16 303000 SR-703 ANCHOR F.C VT-3 F3.10 HDE 4.3-148 C C..-11-3.88 COMPLETE
ATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONEN'IS PAGE: 155 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 135
SUMMARY
EXAMINATION AREA HUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK>>5614-H-533 REF.DWG.HO.004-C17 303500 4.CCH-30 F-8 LINEAR DOUBLE ACTING RES'IRAIHT F2.10 73'-10 3/8 VT.3 1-14-89 2-8-89 1.23-89 NDE 4.3-121 NCR.89.0026 NCR-N-89-0240 M89-402 C---C 11.1-88 VT-3 COMPLETE: CORROSION WITH PAINT FLAKING OFF AT VERTICAL SUPPORT WELDS: ADDITIONAL REPAIRS MADE DUE TO C---JNE WALKDOWN.BOLTING TIGHTENED.
303700 SR.437 F-8 VT-3 HDE 4.3-141 C C---11-3-88 COMPLETE LINEAR 4 SIDED BOX RESTRAINT F2.10 73'10 3/8 DATE: 08/31/89 VI S IOH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988>, SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 156 COMPONENT COOLING SYSTEM SUPPORTS&HANGERS N I 0 20NE NUMBER: 137
SUMMARY
EXAMINATION AREA HUMBER IDENT I F I CAT IOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C19 304200 4.CCH-25 ANCHOR F-C , VT-3 NDE 4.3-165 C C---11-8-88 VT COMPLETE F3.10 304500 4-ACH-28 ROO HANGER F-C F3.10 VT-3 11.11.88 HDE 4.3 169 CNR-88-4-064 C--C 11 8-88 VT COMPLETE)LOCKNUT BACKED OFF,-C INCOMPLETE NUT ENGAGEMEHT ON BOTTOM OF CLAMP, CHF ISSUED, HUTS WILL BE TIGHTENED DURING FUTURE OUTAGE, WILL BE RESCHEDULED FOR NEXI'UTAGE 0 J la DATE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 157 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS 20NE NUMBER: 139
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK~*REF.DUG.NO.004-C21 305400 4-CCH-13 DOUBLE ACTING RESTRAINT F-C VT-3 F3.10 HDE 4.3.149 C C---11.3-88 VT COMPLETE 305500 SR-708 DOUBLE ACI'IHG RESTRAINT F-C F3.10 VT-3 2-25-86 VT-3 12.10.88 2-27.86 NDE 4.3.47 HCR.MCI-86-15 HDE 4.3-209 CHF.88.4.071 HCR 254 86 C-..C 12-9-88 PERFORMED A REEXAMIHATION TO C CLOSE OUT MCI-86-15:
CONDITIONS HAVE NOT-C BEEN CORRECTED:
RESEARCH OF RECORDS-C IDENTIFIED NCR 254-86 ISSUED FOR C---CORRECTIVE ACTIONI'HGIHEERIHG DISPOSITION
-ACCEPTABLE AS-IS 700 4-CCH-15 DOUBLE ACTING RESTRAINT F-C VT-3 HDE 4.3-150 C C---11-3-88 VT COMPLETE F3.10 306200 4-CCH-17 DOUBLE ACTING RESTRAINT F-C VT-3 NDE 4.3-151 C C.-.11-3-88 VT COMPLETE F3.10
DATE: 08/31/89 EVISION: 3 TURKEY POINI'UCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE'I (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 158 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 141
SUMMARY
EXAMINATION AREA NUMBER IDEH1'IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R""CALIBRATION BLOCK**REF.DWG.NO.004-C23 307100 4-CCH-28 GANG HANGER RESTRAINT F-C F3.10 VT-3 VT-3 HDE 4.3-182 E C.--12-7-88 VT COMPLETE: EXPANDED SCOPE NDE 4.3-239 C---EXAMINATION TO DETERMINE EXTENT OF CORROSION 307200 4-CCH-27 HANGER (GANG RESTRAINT)
F-C VT-3 F3.10 VT-3 NDE 4.3-181 E---C 12-7-88 VT COMPLETE: EXPANDED SCOPE NDE 4.3-238 C---EXAMINATION TO DETERMINE THE EXTENT OF CORROSION:
307300 4-CCH-29 RESTRAIHI'BOX)
F-C VT-3 F3.10 Vr-3 NDE 4.3-183 HDE 4.3-240 E C-.-12-7-88 VT COMPLETE: EXPANDED SCOPE C--.EXAMINATION TO DETERMINE EXTENT OF CORROSIOH 400 4-CCH-30 GAHG HANGER RESTRAINT F C F3.10 VT-3 VT-3 11-17-88 VT.3 NDE 4.3-121 NDE 4.3-184 CNR.88-4-066 NDE 4.3.241 C'--C 11-1-88 VT-3 COMPLETE, CORRISON NITH-C PAINT FLAKING OFF AT VERTICAL SUPPORT C NELDS: 12 7 88 VT COMPLETE, ADDITIONAL C--EXAM TO DETERMINE EXTENT OF CORROSION 307500 4-CCH-31 GANG HANGER RESTRAINT F-C F3.10 VI'-3 VT-3 NDE 4.3-185 E-.-,C 12.7-88 VT COMPLETE, EXPANDED SCOPE NDE 4.3.242 C-EXAMIHATION TO DETERMINE EXI'EHT OF CORROSION 307600 4.CCH-32 GAHG HANGER RESTRAINT F-C VT-3 F3.10 VT.3 NDE 4.3-186 NDE 4.3.243 E---C 12-7-88 VT COMPLETE: EXPANDED SCOPE C---EXAMINATION TO DE'IERMIHE EXTEHT OF CORROSIOH 307700 4.CCH-33 GANG HANGER RESTRAINT F-C F3.10 Vl'.3 NDE 4.3.122 VT-3 NDE 4.3-187 11-17-88 CNR-88 4 066 VT-3 NDE 4.3.244 C.--C 11-1-88 Vl'-3 COMPLETE, CORROSION IJITH.C PAINT FLAKING OFF AT VERTICAL SUPPORT-C TELOS: 12-7-88 EXPANDED SCOPE C---EXAMINATION TO DETERMINE EXTENT OF CORROSION gl DATE: 08/31/89 VI SIGH: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONEH'IS PAGE: 159 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS N I 0 ZONE NUMBER: 142
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM HO ME'IHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATION BLOCK**REF.DWG.HO.004-C24 307900 4-CCH-57 DOUBLE ACTING RESTRAINT F-C F3'0 VT-3 VT-3 NDE 4.3-208 E--C 12-7-88 VT COMPLETE: EXPANDED SCOPE NDE 4.3-258 C---EXAMINATION TO DETERMINE EXTENT OF CORROSION, LIGHT RUST 308000 4-CCH-67 SUPPORT (SLIDIHG BASE SI'ANCHION)
F C F3.10 VT-3 VT-3 NDE 4.3.205 E.--C 12 7-88 VT COMPLETE: EXPANDED SCOPE NDE 4.3-253 C---EXAMINATION TO DETERMINE EXTENT OF CORROSION, LIGHT RUST 308100 4-CCH-63 ROD HANGER F-C F3.10 VT-3 NDE 4.3-207 E C--12-7-88 VT COMPLETE: EXPANDED SCOPE EXAMINATIOH TO DETERMINE EXTEHT OF CORROSION 308200 4-CCH.66 BOX RESTRAINT F-C F3.10 VT-3 VT-3 HDE 4.3-206 E---C 12-7-88 VT COMPLETE: EXPAHDED SCOPE HDE 4.3 252 C-..EXAMINATION TO DETERMINE EXTEHI'F CORROSIOH, LIGHT RUST 308300 4-CCH.65 SLIDIHG STANCHION F C F3.10 VT-3 VT-3 NDE 4.3-204 E--C 12-7 88 VT COMPLETE: EXPANDED SCOPE HDE 4.3-251 C--EXAMIHATION TO DETERMINE EXTENT OF CORROSION, LIGHT RUST 0 Ov F.
TE: 08/31/89 VISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 160 COMPONENT COOLING SYSTEM SUPPORTS&HANGERS ZONE NUHBER: 144 SUHHARY EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE Nl O~S OHGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**IN SUPPORT OF ECCS CHR AC RHR REF.DWG.NO.004 C26 308800 4-CCH-39 U BOLT RESTRAINT GAEL 34'8" F-8 VT-3 F2.10 NDE 4.3.143 C C---11-3-88 VT COMPLETE 308810 4-CCH-39 U BOLT RESTRAINT C]EL 34 8 F.C VT-3 NDE 4.3.143 C C.--11-3-88 VI'OMPLETE F3.10 308820 4-CCH-39 INTEGRAL ATTACHHEN'I (3"X1 1/2")5/8" T CIEL 34'Bn D-C VT.3 D3.20 NDE 4.3-143 C C.-.11-3-88 VT COHPLETE 308900 4-CCH-,47 4 SIDED BOX RESTRAINT CIEL 57~0~~F-8 F2.10 VT-3 NDE 4.3-194 E---C 12-8-88 VT COMPLETE: EXPANDED SCOPE EXAMINATION 309000 4.CCH.28 4 SIDED BOX RESTRAINT CJEL73'0 F 8 VT-3 NDE 4.3 193 E C--12-8-88 VT COMPLETE: EXPANDED SCOPE F2.10 EXAMIHATION TO DETERMINE EXTENT OF CORROSION 309100 4-CCH-27 DOUBLE ACTIHG RESTRAINT C i E L73'0" F-8 VT-3 NDE 4.3-192 E---C 12-8-88 VT COMPLETE: EXPANDED SCOPE F2.10 VT-3 HDE 4.3.254 C---EXAHINATION TO DETERMINE EXTENT OF CORROSION 309200 4-CCH-26 DOUBLE ACTING RESTRAINT CIEL73i10 F-8 VT-3 NDE 4.3.124 C...C 11-1.88 VT-3 COHPLETE: 12-8-88 F2.10 VT-3 NDE 4.3 195 C--REEXAMINATION TO DETERMINE EXTENT OF 11-17-88 CNR-88-4.066 C CORROSION 309300 4-CCH-60 DOUBLE ACTING RESTRAINT F-8 VT-3 NDE 4.3 191 E-C 12-8-88 VT COMPLETE: EXPANDED SCOPE F2.10 VT-3 NDE 4.3.255 C-.-EXAHINATIOH TO OETERHIHE EXTENT OF CORROS ION DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UHIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)~SECOND PERIODS SECOND INTERVAL CLASS 3 COMPOHENTS PAGE: 161 COMPONENT COOLING SYSTEM SUPPORTS&HANGERS ZONE NUMBER: 144
SUMMARY
EXAMINATION AREA NUHBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**IN SUPPORT OF ECCS CHR AC RHR REFT DWG.NO.004-C26 309400 4.CCH.59 DOUBLE ACTING RESTRAINI'IEL73'10 F-B F2~10 VT-3 NDE 4'.123 VT-3 NDE 4'-188 11-17-88 CNR-88.4.066 C---C 1'1-1-88 VT-3 COMPLETE, CORROSION MITH-C PAINT FLAKING OFF AT VERTICAL SUPPORT-C'MELDS AND PAD: 12-8-88 REEXAMINATION TO DETERHINE EXTENT OF CORROSION 309500 4.CCN-58 RESTRAINT (DOUBLE ACTING)C I EL73'0" F-B F2.10 VI'-3 VT-3 NDE 4'190 E--C 12-8-88 VT COMPLETE: EXPANDED SCOPE NDE 4'257 C---EXAMIHATION TO DETERMINE EXTENT OF CORROSION 309600 478-1 RESTRAINT (RIGID STRUT)F-8 F2.10 VT-3 NDE 4.3-189 E C-..12-8-88 VT COMPLETE, EXPANDED SCOPE EXAMINATION TO DETERMINE EXTENT OF CORROSION, DESIGN CONFIGURATION PROBLEM, DEEP 89-138 ISSUED TO HQOIFY SUPPORT MOVING TO A NEll LOCATION DATE: 08/31/89 EVI SION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUI'AGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 162 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 147
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004.C29 311200 4-CCH-50 SLIDING STANCHION F-C VT.3 F3.10 NDE 4.3-118 C C---11-1-88 VT-3 COMPLETE DATE: 08/31/89 EVISIOH: 3 TURKEY POIHT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 163 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS ZONE NUMBER: 149
SUMMARY
EXAMINATION AREA NUHBER IDENT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-C31 312100 279-1 3 SIDED BOX RESTRAINT F-C F3.10 VI'-3 VT-3 NDE 4.3-196.E C--12-8 88 VT COMPLETE EXPANDED SCOPE NDE 4.3.233 C---EXAMINATION TO DETERMINE EXTENT OF CORROSION 312200 4-CCH-58 DOUBLE ACTING RESTRAINT F-C F3.10 VT-3 VT-3 11-17-88 VT-3 VT-3 HDE 4.3-126 NDE 4.3-201 CHR-88 4 066 NDE 4.3 256 NOE 4.3-259 C---C 11-1-88 VT-3 COMPLETE: 12-8-88-C REEXAMINATION TO DETERMINE EXTENT OF-C CORROSION C-C-312300 4-CCH-59 DOUBLE ACTING RESTRAINT F-C F3.10 VT-3 VT.3 NDE 4.3.202 E C---12-8.88 VT COMPLETE: EXPANDED SCOPE NDE 4.3.248 C---EXAMINATION TO DETERMINE EXTENT OF CORROSION 312400 4.CCH-60 DOUBLE ACTING RESTAINT F-C F3.10 VT-3 VT-3 HDE 4.3.203 E C.--12.8-88 VT COMPLETE: EXPANDED SCOPE HDE 4.3-249 C-.-EXAMINATION TO DETERHINE EXTENT OF CORROSION 312500 4-CCH-26 RESTRAINT (DOUBLE ACTIHG)F-C F3.10 VT.3 VT-3 HDE 4.3-197 E C---12-8-88 VT COMPLETE: EXPANDED SCOPE HDE 4.3-235 C---EXAMIHATIOH TO DETERMINE EXTENT OF CORROSION 312600 4-CCH.27 DOUBLE ACTING RESTRAINT F-C F3.10 VT-3 VT-3 VT-3 NDE 4.3.119 C C---11-1-88 VT COMPLETE: 12-8-88 NDE 4.3-198-C REEXAMINATION TO DETERMINE EXTENT OF HDE 4.3.237 C---CORROSIOH 312700 4-CCH-28 RESTRAINT F-C F3.10 VT-3 HDE 4.3-199 E C---12-8-88 VT COMPLETE: EXPANDED SCOPE EXAMINATION TO DETERMINE EXTENT OF CORROSION 312800 4.CCH.45 4 SIDED BOX RESTRAINT F-C VT-3 NDE 4.3.200 E---C 12-8-88 VT COMPLETE: EXPANDED SCOPE F3.10 VT-3 NDE 4.3-245 C---EXAMIHATION TO DETERMINE EXTENT OF CORROSION
DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1 988)~SECOND PER I 00~SECOND I NTERVAL CLASS 3 COMPONENTS PAGE: 164 COMPONENT COOLING SYSTEM SUPPORTS&HANGERS ZONE NUMBER: 150
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO MEl'HOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK"*IN SUPPORT OF ECCS CHR AC RHR REF.DNG.NO.004-C32 313200 4.CCH-55 ROO HANGER C[EL 75'4" F-8 VT-3 F2.10 NDE 4.3.157 C C---11-5-88 VT COMPLETE 313210 4.CCH-55 ROD HANGER CiEL 75'4" F.C VT-3 F3.10 NDE 4.3.157 C C---11-5-88 VT COMPLETE 313300 4-CCH-32 4 SIDED BOX RESTRAINT CIEL 75'4" F-B VT-3 F2.10 NDE 4.3-158 C C---11-5-88 VT COMPLETE DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTIOH FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 165 COHPONEHT COOLING SYSTEH SUPPORTS&HANGERS ZONE NUHBER: 152
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RS EH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*>>REF.DWG.NO.004-C34 314800 4-ACH-187 SLIDING STANCHION F-C VI'-3 F3~10 NDE 4.3-213 E C---12-9-88 VT COHPLETE: EXPANDED SCOPE EXAMINATION 314900 4-ACH-188 SPRING HANGER F C F3.10 VT-3 9.28-88 3.6-89 3-20-89 VT-3/4 NDE 4.3-74 CHR-88 4 022 NCR-89.0128 WA890320165852 89.702 C---C 9-27.88 VT COMPLETE, LOOSE LOCK HUTS(-C TIGHTENED PER NCR C.315000 4-ACH-188 SPRING HANGER F-C F3.50 VT.4 9-28.88 3-6-89 3-20-89 VT-3/4 NDE 4.3-74 CHR-88-4.022 NCR-89.0128 WA89032165852 89-702 C---C 9 27-88 VT COMPLE'IE:
CNF ISSUED FOR-C VERIFICATION OF SETTINGS: RECORDED SET'TINGS.8" AND.9", ACCEPTABLE AS-IS C-315100 SR.692 BOX RESTRAINT F-C F3.10 VT-3 NDE 4.3-214 E C--12-9-88 VT COHPLETE: EXPANDED SCOPE EXAMINATIOH DATE: 08/31/89 EVISIOH: 3 TURKEY POINT HUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988>, SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 166 COMPONENT COOLING SYSTEM SUPPORTS 8 HANGERS N I 0 ZONE NUMBER: 153
SUMMARY
EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C35 315900 SR-675 SLIDING STANCHION F-C VT-3 F3.10 HDE 4.3-147 C C---11-3-88 VT COMPLETE 316100 4-CCH-7 ROO HANGER F.C F3.10 VT-3 11-8-88 PWO VT-3 HDE 4.3-145 CNR 88.4-050 WA881207092740 NDE 4.3-232 C---C 11-3.88 VT COMPLETE(INCOMPLETE THREAD-C ENGAGEMENT ON LOCK NUT: PWO WA8812070927
.C ISSUED FOR REPLACEMEHT OF BOLT 8 NUT C---WITH LONGER BOLT: BASELINE PERFORMED 1-6-89 HRI 316800 SR-679 RESTRAINT F-C VT.3 F3.10 NDE 4.3-146 C C---11-3-88 VT COMPLETE
DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOHD INTERVAL CLASS 3 COMPONENTS PAGE: 167 COMPONENT COOLING SYSTEM SUPPORTS S HANGERS ZONE NUMBER: 156
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C38 318300 SR-667 SPRING HANGER F-C VT-3 NDE 4.3-66 C C---9-14-88 VT COMPLETE F3.'IO 318400 SR-667 SPRING HANGER F-C VT-4 NDE 4.3.66 F3.50 9-14-88 CNR.88.4-017R 9-15.88 WA880915123529 C C---9 14-88 VT COMPLETE: RECORDED SPRING-C SETTINGS POUNDS 3880, INCHES 1 1/4" CHF ISSUDED TO PLANT FOR VERIFICATIOH OF SETTINGS: DETERMINED TO BE ACCEPTABLE PER DESIGN SPEC+OR-SX
DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNI'T 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COHPONEN'IS PAGE: 168 AUX.FEEDNATER SYSTEH DISCH.SUPPORTS 8 HANGERS ZONE HUHBER: 158
SUMMARY
EXAMINATION AREA NUHBER IDEN'I I F I CAT IOH ASME SEC.XI CATGY EXAH ITEM NO HETHOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C40.320900 H-323-12 DUAL STRUT HANGER F-C VT-3 NDE 4.3-136 C C---11-4-88 VT COMPLETE F3.10 321000 H-323-11 4 SIDED BOX RESTRAINT F-C VT.3 F3.10 NDE 4.3-13/C C.--11 4-88 VT COMPLETE DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUI'AGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 3 COMPONENTS PAGE: 169 AUX.FEEDWATER SYSTEM DISCH.SUPPORTS 8 HANGERS ZONE NUMBER: 159
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DWG.NO.004-C41 321800 H-323-03 F-C VT-3 RESTRAINT (4 SIDED BOX)DOUBLE F3.10 ACTING NDE 4.3-81 C C---9-27-88 VT COMPLETE DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLAHT UNIT 4 INSERVICE INSPECTION FIHAL REPORT TABLES OUTAGE 1 (1988), SECOHD PERIOD, SECOND INTERVAL CLASS 3 COHPONENTS PAGE: 170 AUX.FEEDWATER SYSTEM DISCH.SUPPORTS 8 HANGERS N I 0 ZONE NUMBER: 161
SUMMARY
EXAMINATIOH AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO HETHOO PROCEDURE S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.004-C43 323200 SR-525 F-C VT-3 NDE 4.3-90 C C---9-27-88 VT COMPLETE: REVIEW OF DWG.4 SIDED BOX RESTRAINT W/LUGS F3.10 5610-P-154 REV.2 IDENTIFIES THIS SUPPORT AS H-324-11 323500 SR-527 4 SIDED BOX REST.W/U-BOLT/CRUSH SADDLE F-C VT-3 F3.10 NDE 4.3-216 E C---12 9-88 VT COMPLETE: EXPANDED SCOPE EXAMINATION 323600 4-CSTH-14 ROD HANGER F-C F3,10 VT-3 9.28.88 10-24-88 1.6-89 2-4-89 VT-3 3.27.89 NDE 4.3.89 CNR-88.4.028 NCR-88-0159 NCR-N-89-0037 PS89-165 M89.943 NIS.2 C---C 9-27.88 VT COMPLETE: REVIEW OF DWG..--C 5610-P-154 REV.2 IDENTIFIES THIS HANGER AS H-324-13: CNF ISSUED BENT OR DEFORMED RODS: RODS REPLACED C-323700 4.CSTH-17 RESTRAINT F-C F3.10 VT-3 NDE 4.3-215 E C---12 9-88 VT COMPLETE: EXPANDED SCOPE EXAMINATION 323900 4.CSTH-37 STRUT RESTRAINI'-C F3.10 VT-3 9-28-88 1-13-89 VT-3 NDE 4.3-91 CNR-88.4-029 PS89-064 9.9-H89.402 C---C 9-27-88 VT COMPLETE: REVIEW OF DWG.C 5610-P-154 REV.2 IDEHTIFIES THIS STRUT C---AS H-324-19: CNF ISSUED FOR INCOMPLETE C---THREAD ENGAGEHENT:
READJUSTED PIPE CLAMP THREAD ENGAGEMENT DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INI'ERVAL CLASS 3 COHPONEHTS PAGE: 171 AUX.FEEDWATER SYSTEH DISCH.SUPPORTS 8 HANGERS N I 0 ZONE NUHBER: 162 SUHHARY EXAHINAT ION AREA HUHBER IDENT I F ICATION ASHE SEC.XI CATGY EXAH ITEH NO HETHOD S ONGT T RSEH A E I 0 E REHARKS PROCEDURE T C G M R"*CALIBRATION BLOCK**REF.DUG.NO.004-C44 324200 H-324-18 SPRING HANGER F-C F3.10 VT-3 9-28-88 10-25-88 3-14-89 3-5.89 VISUAL VT-3 9.9 NDE 4.3-82 CNR-88-4-027 NCR-88-0160 NCR-N-89-0323 PS89-311 10.23 H89-1387 3.1 M-89-1388 C---C 9-27-88 VT COHPLETE: CNF ISSUED FOR-C INCOHPLETE THREAD ENGAGEHEHT:
REEAHINED-C C-C-C-C-324300 H-324-18 SPRING HANGER F-C F3.50 VT-4 9-28-88 10.25-88 3-14.89 3-5-89 VT-3/4 NDE 4.3-82 CNR-88.4-027 NCR-88.0160 NCR-N.89.0323 PS89-311 H.89-1388 C---C 9.27-88 VT COHPLETE: CNF ISSUED FOR-C VERIFICATION OF SETTINGS, READJUSTED
-C SETTING TO 229 LBS C.C-C-324600 4-CSTH.124 ROO HANGER F-C VT.3 F3.10 NDE 4.3.83 C C---9.27-88 VT COHPLETE DATE: 08/31/89 EVI SION: 3 TURKEY POINT NUCLEAR PLANT UNI'T 4 INSERVICE INSPECTION FINAL REPORT TABLES OU'IAGE 1 (1988)i SECOND PER I OD~SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 172 AUX.FEEDWATER SYSTEM DISCH.SUPPORTS 8 HANGERS N I 0 ZONE NUMBER: 163
SUMMARY
EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S 0 N G T T R S E H A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK*" REF.DUG.NO.004-C48 325300 H-323-23 STRUT HANGER F-C VT-3 NDE 4.3-217 E C-.-12-9-88 VT COMPLETE: EXPANDED SCOPE F3.10 EXAH I HAT I ON 325400 H-323-22 STRUT HANGER F-C VT-3 NOE 4.3-84 C C---9-27-88 VT COHPLETE F3.10 325500 H-323-01 STRUT HANGER F-C VI'-3 NDE 4.3-218 E C---12-9.88 VT COMPLETE: EXPANDED SCOPE F3.10 EXAMINATION DATE: 08/31/89 EVI SION: 3 TURKEY POINt NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 l1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPOHENTS PAGE: 173 AUX.FEEDWATER SYSTEM SUCTION SUPPORTS&HANGERS ZONE NUMBER: 164
SUMMARY
'XAM I HAT I OH AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*>>REF.DWG.NO.004-C45 326100 H-341-21 ROO HANGER F-C VI'-3 F3.10 NDE 4.3-87 C C--.9.27-88 VT COMPLETE 326300 H-341-19 BOX RESTRAINT F-C VT-3 F3.10 NDE 4.3.88 C C--.9-27-88 VT COMPLETE 326500 H-341-17 ROD HANGER F C F3.10 VT-3 9.28.88 1.19.89 VT.3 NDE 4.3-86 CNR-88 4 026 PS 89.064 9.9.M89-402 C---C 9.27-88 VT COMPLETE CNF ISSUED FOR-C INCOMPLETE THREAD ENGAGEMENT, ADJUSTED C--PIPE CLAMP THREAD ENGAGEMENT C 328000 H-341-03 SLIDING STANCHION/WELDED F-C Vt-3 F3.10 NDE 4.3 85 C C---9-27-88 VT COMPLETE DATE: 08/31/89 REVISION: 3 CIRC.'WATER INTAKE SUPPORTS 8 HANGERS TURKEY POINT NUCLEAR PLANT UN4 IHSERVICE INSPECTION FIHAL REPORT TABLES OU'IAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 CONPONENTS PAGE: 174 ZONE NUNBER 165 SUNHARY EXANINATI OH AREA HUHBER IDENT IF I CATION ASME SEC.XI CATGY EXAN ITEN HO HETHOD PROCEDURE N I 0 S ON 6T T RSEH A E I 0 E RENARKS T C G N R**CALIBRATION BLOCK**REF.DWG.NO.004-C49 328500 2 RESTRAINT F.C VT-3 NDE 4.3-156 C C---11-5-88 VT CONPLETE F3.10 328800 H.197-9 PEDESTAL SUPPORT F.C VT-3 F3.10 NDE 4.3-155 C C-.-11-5-88 VT COHPLE'IE 328825 VALVE 4-50-331 SYSTEN IHSERVICE TEST 18'.6" 0 D-B VT-2 HDE 4.2-1 D2.10 C C-.-11-21-88 VT-2 OF VALVE ONLY DATE: 08/31/89 EVI SION: 3 CIRC.MATER SYSTEH SUPPORTS 8 HANGERS TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 175 ZONE NUHBER: 166
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO HETNOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**REF.DUG.NO.004-CSO 328899 J PEDESTAL SUPPORT F-C VT-3 F3.10 NDE 4.3.92 C C---9-27.88 VT COMPLETE DATE: 08/31/89 EVISION: 3 TURKEY POINT NUCLEAR PLANT UNIT'INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 3 COMPONENTS PAGE: 176 SUPPORT PEDESTALCIRC.
MATER SYSTEM SUPPORTS 8 HANG ZONE NUMBER: 167
SUMMARY
EXAMINATION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DUG.NO.004-C51 330100 N-190.10 PEDESTAL SUPPORT F-C VT-3 F3.10 NDE 4.3-79 C C---9-27-88 VT COMPLETE DATE: 08/31/89 REVISION: 3 CIRC.WATER SYSTEM SUPPORTS B HANGERS TURKEY POINT NUCLEAR PLANT UNI'T 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOHD INTERVAL CLASS 3 COMPONENTS PAGE: 177 ZONE NUMBER: 167
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGI'RSEH A E I 0 E REMARKS T C G M R*~CALIBRATION BLOCK**REF.DWG.NO.004-C51 330400 H-190-09 PEDESTAL SUPPORT F-C VT-3 F3.10 NDE 4.3.80 C C---9 27-88 VT COMPLETE 330800 H-190.01 BOX RESTRAINT F.C VT.3 F3.10 NDE 4.3.78 C C.--9.27-88 VT COMPLETE 330825 4E207A CCW HEAT EXCHANGER UT-0 THICK NDE 5.18.1 C C---12-1-88 THICKNESS OH CHANNEL HEAD RANGES FROH 0.66" TO 0.72"**COPPER NICKEL STEPWEDGP*
330850 4E207B CCW HEAT EXCHANGER UT-D THICK NDE 5.18.1 C C 12 1-88 THICKNESS ON CHANNEL HEAD COHPLETE RANGES FROM 0.68" TO 0.70"**COPPER NICKEL STEPWEDGE~*
330875 4E207C CCW HEAT EXCHANGER UT.O THICK NDE 5.18-1 C C--12-1-88 UI'HICKNESS COMPLETE THICKNESS RANGES FROM 0.64" TO 0.72"**COPPER NICKEL STEPWEDGE*>>
DATE: 08/31/89 EVI SION: 3 CONDENSER NORTH SIDE TURKEY POINl'UCLEAR PLAHl'NIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COMPONENTS PAGE: 178 ZONE NUMBER: 200
SUMMARY
EXAMINATION AREA HUNGER IDEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATIOH BLOCK~*REF.DUG.NO.A LATER 400000 E7A (4ANO)INLET WATERBOX ET NDE 1.1 C---C 10-25-88-11,200 TUBES EXAMINED 100K, 10 TUBES PLUGGABLE"*LATER~*
DATE: 08/31/89 EVISION: 3 CONDENSER NORTH SIDE TURKEY POINI'UCLEAR PLANT UNI'T 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COHPONENTS PAGE: 179 ZONE NUHBER: 201 SUHHARY EXAHINATION AREA NUHBER IDENT'IFICATION ASME SEC.XI CATGY EXAH ITEM NO HETHOD PROCEDURE N I 0 ONGT RSEH E I 0 E REMARKS C G H R**CALIBRATION BLOCK~*REF.DUG.NO.B LA'TER 400010 E7A (4ANO)OUTLET WATERBOXES ET NDE 1~1 C.--C 10-26 88-11,200 TUBES EXAHINED 100K, 280 TUBES PLUGGABLE"*LATER**
DATE: 08/31/89 EVISIOH: 3 CONDENSER SOUTH SIDE TURKEY POINT NUCLEAR PLANT UNH 4 IHSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COMPONENTS N I 0 PAGE: 180 ZONE NUMBER: 201
SUMMARY
EXAMI HAT IOH AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**REF.DUG.NO.B LATER 400020 E7A (4ASO)INLET WATERBOXES ET NDE 1.1 C---C 10-31-88 11,200 TUBES EXAMINED 100K, 33 TUBES PLUGGABLE**LATER**400030 E7A (4ASO)OUTLET lJATERBOXES ET HDE 1.1 C---C 10.31-88 11,200 TUBES EXAMINED 100/, 13 TUBES PLUGGABLE**LATER**
1~
DATE: 08/31/89 EVISION: 3 CONDENSER NORTH SIDE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OU'TAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COMPOHENTS PAGE: 181 ZONE NUMBER: 201
SUMMARY
EXAMIHATION AREA NUMBER IDENT IF I CAT IOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*" REF.DWG.NO.B LATER 400040 E7B (4BNO)INLET WATERBOXES ET NDE 1.1 C--.C 11-1-88 11,200 TUBES EXAMINED 100K, 14 TUBES PLUGGABLE**LATER**400050 E78 (4BNO)OUTLET WATERBOXES ET NDE 1.1 C---C 10 31-88 11,200 TUBES EXAMINED 100)l, 9 TUBES PLUGGABLE**LATER**
DATE: 08/31/89 EVISION: 3 CONDENSER SOUTH SIDE TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COMPONENTS PAGE: 182 ZONE NUMBER: 20'I
SUMMARY
EXAMINATIOH AREA HUMBER IDENT I F I CATION ASHE SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I, 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.B LATER 400060 E78 (4BSO)IHLET WATERBOXES ET NDE 1.1 C-C.-11-4-88-11,200 TUBES EXAMINED 100X)NO TUBES PLUGGABLE**LATER**400070 E78 (4BSO)OUTLET WATERBOXES ET NDE 1.1 C.--C 11.3-88-11,200 TUBES EXAMINED 100K, 3 TUBES PLUGGABLE**LATER**
DATE:.08/31/89 EVISION: 3 REACTOR VESSEL HEAD LIFT RIG TURKEY POINT NUCLEAR PLANT UNI'I 4" INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988)i SECOND PER I OD i SECOND I NTERVAL CLASS 4 COMPONENTS N I 0 PAGE: 183 ZONE NUMBER: 300
SUMMARY
EXAHINAT ION AREA NUMBER IDENTIFICATION ASME SEC~XI CATGY EXAH ITEH NO HETKOD S ONGT T RSEN A E I 0 E REMARKS PROCEDURE T C G H R**CALIBRATION BLOCK~*REF.DWG.NO.A-1 403500 2/3-A MT CLEVIS PLATE TO LEG (FILLET)CTHT 9.4 W 88-503 C C---9-28-88 HT COMPLETE 403600 2/3.8 HT CLEVIS PLATE TO LEG (FILLET)CTH'I 9.4 W 88-503 C C---9-28-88 HT COMPLETE 403650 2/3-C HT CLEVIS PLATE TO LEG (FILLET)CTHT 9.4 W 88.503 C C---9-28-88 HT COHPLETE RING GIRDER TO SUPPORT LUG (F ILLET)CTHT Ml 9.4 W 88-503 C C---9-28-88 HT COMPLETE 403800 4/5-8 RING GIRDER TO SUPPORT LUG (FILLET)O'IHT HT 9.4 W 88 503 C C---9-28-88 Hl'OHPLETE 403850 4/5-C RING GIRDER TO SUPPORT LUG (FILLET)CTHT HT 9.4 W 88.503 C C---9-28-88 MT COHPLETE 403900 11/12-A LINK LUGS TO LINK (FULL PENETRATION)
CTHT HT 9.4 W 88 435 C C-~-9.24-88 MT COMPLETE DATE: 08/31/89 EVISION: 3 REACTOR VESSEL MEAD LIFT RIG TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COMPONENTS PAGE: 184 ZONE NUMBER: 300 SUMHARY EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO HETNDO PROCEDURE N I 0 S ONGT T RSEM A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK*~REF.DWG.NO.A-1 404000 11/12-8 LINK LUGS TO LINK (FULL PENETRATION)
CTHT HT 9.4 W 88.435 C C-.-9-24-88 HT COHPLETE 404050 11/12-C LINK LUGS TO LINK (FULL PENETRATION)
CTHT HT 9.5 W 88-435 C C---9 24-88 HT COMPLETE DATE: 08/31/89 EVI SION: 3 REACTOR VESSEL INTERNALS LIFT RIG TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COHPONEHTS PAGE: 185 ZONE NUMBER: 400
SUMMARY
EXAMINATION AREA HUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G H R*"CALIBRATIOH BLOCK">>REF.DWG.HO.A-10 407600 8/9.A TOP LUGS To SLING BLOCK (FULL PEN.)CTHT 9.4 W-88-461 C C---9-27-88 HT COMPLETE 407700 8/9.B TOP LUGS TO SLING BLOCK (FULL PEH.)CTHT HT 9.4 W 88-461 C C.-.9.27-88 HT COHPLETE 407800 9/10-A t SIDE LUGS TO SLING BLOCK (FULL PEH.)CTMT HT 9.4 W 88-461 C C---9-27-88 MT COMPLETE 407900 9/10-8 SIDE LUGS TO SLING BLOCK (FULL PEH.)CTHT MT 9.4'W 88-461 C C--.9-27-88 HT COMPLETE 407910 9/10-C SIDE LUGS TO SLING BLOCK (FULL PEN.)CTHT HT 9.4 W 88.461 C C---9.27-88 HT COMPLETE 408000 14.A SPREADER ASSEMBLY (FILLET)CTHT HT 9.4'W 88-461 C C---9-27-88 HT COHPLETE 408010 14-8 SPREADER ASSEHBLY (FILLET)CTHT 9.4 W 88-461 C C---9-27-88 HT COHPLETE DATE: 08/31/89 EVISION: 3*REACTOR VESSEL INTERNALS LIFT RIG TURKEY POINT NUCLEAR PLANT UNIT 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 4 COMPONENTS PAGE: 186 ZONE NUMBER: 400 SUHMARY EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**REF.DWG.NO.A-10 408020 14-C SPREADER ASSEHBLY (FILLET)CTHT MT 9.4 W 88-461 C C---9-27-88 HT COHPLETE 408100 16/17-A LEG OUTER TUBE TO LEG ADAPTER (FULL PEN)CTHT PT 9.5 W 88 460 C C---9-27-88 HT COMPLETE 408200 16/17-B LEG OUTER TUBE TO LEG ADAPTER (FULL PEN)CTHI'T 9.5 W 88-460 C C.--9.27-88 Hl'OHPLETE 408210 16/17-C LEG OUTER TUBE TO LEG ADAPTER (FULL PEN)CTHT PT 9.5 W 88-460 C C---9-27-88 HT COMPLETE 408300 17/18.A LEG OUTER TUBE TO LEVELING SLV(FULL PEN)CTHT PT 9.5 W 88-493 C C..-9.27-88 PT COHPLETE 408400 17/18-8 LEG OUTER TUBE TO LEVELING SLV(FULL PEN)CTHT PT 9.5 W 88-493 C C--9-27-88 PT COMPLETE 408410 17/18.C LEG OUTER TUBE TO LEVELING PT 9.5 W 88.493 C C---9-27-88 PT COMPLETE
DATE: 08/31/89 EVISION: 3 REACTOR COOLANT PRESSURE BOUNDARY TURKEY POINT NUCLEAR PLANT UNI.T 4 INSERVICE INSPECTION FINAL REPORT TABLES OUTAGE 1 (1988), SECOND PERIOD, SECOND INTERVAL CLASS 1 COHPONENTS PAGE: 187 ZONE NUMBER: 001 SUHMARY EXAMINATION AREA NUHBER IDENT IF ICATION ASME SEC.XI CATGY EXAH ITEM NO HETHOD PROCEDURE T N I 0 ON 0T RSEH E I 0 E REHARKS C G M R**CALIBRATION BLOCK**RCPB REF.DUG.NO.004-V1 408700 SYSTEM LEAKAGE TEST B-P TEST OP 1004.1 C C.--5-3-89 VT-2 COMPLETE DURING RCS OVERPRESSURE TEST 815.10 VT-2 NDE 4.2.M892436 C-ATTACHMENT 5 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS r
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI, 1 Ow FLORIDA POWER a UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKS POINT P.O.BOX 3088 FLORIDA CllY FL 33034 U Tl INC 3.Work Performed by P.O.BOX 3218 FLORIDA CllY FL 33034 Addreee 4.Identification of System Saf Date~y i.9 1989 Sheet of un~I>4 Repair Organhatlan P.O.No..Job Ho etc.Type Code Symbol Stamp Authorization No Expiration Date N A 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Safety In).Suet.Line Nome of Manufacturer N A Manufacturer Serial No.N A National Board No.Other fdentificathn Repolred, Reploced, or Replacement ASME Code Stamped (Yee or No 7.Description of Work 8.Tests Conducted:
Htrdrostogc Pneumotte Nominal Operottng Pressure Other N/A Pressure psl Test Temp.egree's F OTE: Supplemental sheets ln form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 ln.X 11 in(2)Information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets ls recorded at the top of this form.
FORM Nls-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel, Ppplhobb MarNrrochrw's Data Reports to bs ottoche4 All welding was performed in accordance with FP6L Welding Control Manual and Sit ual G CERlfRCATE OF COMPLIANCE We certify that the statements made In the report are correct and this to the rules of the ASME Code, Section Xi.S repa r or rep acemen'onforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Sfgned/dr~<i~F4w, Owner o wner's Designee, Title CERTIRCATE OF INSERVIC,E INSPECffON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and employed by Arkw ht Mutual Insurance Com n of Norwood MA.have Inspected tho components described ln thfs Owner's Report during tho poriod to and state that to the best of my knowledge and belfef, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI, By signing this certificate neither tho Inspector nor his employer makes any warranty, expressed or implied, concerning the examinatfons and corrective measures described ln this Owners Report Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this fnspoctlon.
Factory Mutual System Commissions 4956 I Na5cnal Board, Sbrte.~and Endonemente Date 19' Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS.OR REPLACEMENTS As Required by the Provisions of the ASME Code Soction XI Owner FLORIDA POWER 4 UGHT P.O.BOX 529100, MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 30SS FLORIDA CITY FL 33034 5-22-89 Sheet of Unit 4 CWO:D1-3347 Repolr Orgonhathn P.O.Ho..Job No., etc.Type Code Symbol Stamp Authorization No Expiration Date 3.Work Performed by C N U P.O.BOX 3218 FLORIDA CITY FL 33034 N A 4.Identification of System 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 19S1 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Nome of Manufacturer Manufacturer Sorfcl No.NatIonal Board No.Other ldonOicatlon Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yoe or No CVCS Piping S stem N A N A N A N A NA e la 7 Descnption of'Work Modif ied suPPort H-552-H-2 by add ing 2x2 an 1 e brace and base 1 ate.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp.egree's F: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.1 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Pyp5coble Monufoctrrrer's Data Reports to be attache Weldin performed in accordance with the FP&L Weld Control Manual Quality Group B.CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this Re lacement conforms to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed Own or Owner's Designee, Title , 19@.CERTIFICATE OF INSERVICE INSPECiION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors ond the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual insurance Com n of Norwood MA.have inspected the components described in this OwnaVs Report during the period gr'PP'o and state that to tha best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Coda,Section XI.By signing this certificate neither the Inspector nor his employor makes any warranty, oxpressed or implied, concerning the examinations and corrective measures described in this Ownors Report.Futhermore, neither the inspector nor his employer shall be liable ln any manner for any personal injury or property'amage or a toss of any kind arising from or connected with this Inspection.
Factory Mutual System Commissions'956 Htatknol Board, State, Prcwbce.ond Endoreernents Date 8 19 Page 1 of 2 FORM NlS-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Dato Sheet of Unit 4 CWO: D1-3088 PC N-89-0107 Ropoir Organhotfon p.a.No., Job No..oto.Type Code Symbol Stamp Authorization No Expiration Date 3.Work Performed by P.O.BOX 3218 FLORIDA CllY FL 33034 N A g.Identification of System Feedwater S stem'(A>>l*" 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufachror Manufacturer Serial No.Repaired, or Replocomont Snubber Pacific Scientific 104.N/A Tag no.4-1034 N/A Replaced No nubber Support Pacific Scientific N/A 10174 N/A N/A N/A Tag no.4-1034 1976 Replacement 4-FWA-19A N/A Replacement No No 7 Description of Work Re laced frozen snubber at location ta no.4-1034 and re laced transition tube at snubb r o correct'L'imension.
-10 s or 4--1 a Tests Conducted:
Hydrostottc Q Pneumctto Momtnol gperottng Pressure Other N/A Pressure psl Test Temp.egree's F OTE: Supplemental sheets In form of Iles, sketches, or drawings may be used, provided (1)size is 8 1/2 In.X 11 in(2)information In items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets Is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Rema~Examinations performed by FPL Construction Quality Control personnel.
hpp5cobto ManufoctLrror'o Doto Reports to bo attached All weldin erformed in accordan w sire procedures.
Quality Group'B'.CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.Re lacement repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Signed/r N A Expiration Date ACrr S.r-e~~Owner r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components descnbed in this Owner's Report during the period PEAL.xg 6'Pg and state that to the best of my knowledge and belief.the Owner has performed examinations and taken corrective measures described in this Owner's Report ln accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4958 N I Nosonal Board.Stote, ProVtnoa, and Endoraannonto Date 8 19~~
Pape'I of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Dote ghent~al Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CWO:Dl-2492 PCM N/A Rthpolr Orgcnhatbn P.O.Ho Job Ho etc.3.Work Performed by N Type Code Symbol Stamp Authorization No P.O.BOX 3218 ORIDA CITY FL 33034 Expiration Date N A 4, Identification of System Intake Coolin Water (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Intake Coolin er S stem Name of Manufacturer N/A Manufacturer Serlol No.N A National Board No.N A N A N A Repaired, Replaced, or Replacement Re lacemen ASME Code Stomped (Yee or No 7.Description of Work ins Su ort//A-8886 modified to meet design drawing clearance requirements.
S.Tests Oanduated:
Hydrostalle Pneumatle Namlnal Operating Pressure X Other Systems leakage test to verify integrity of bolted connections after opening and reclosing system.OTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 in.X 11 in(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Pago 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
hppkobre MaorrfochnCe Data Reports to be athxrred Welding performed in accordance with FPL Weld Control Manual and site procedures.
Quality Group C.CERTIFICATE OF COMPUANCE Wo certify that the statements made ln the report are correct and this Re lacement to the rules of the ASME Code, SocUon XI.ropa r or rop acemen conforms Type Code Symbol Stamp N/A Certificate of AuthorizaUon No.Expiration Date pW~F)77~44M.Owner Owner's Designoe, TIUe Z J4,19 CERTIFICATE OF (NSERVICE INSPECTION I, the undersigned, holding a vaffd commission issued by the NaUonal Board of Boiler and Pressure Vossel Inspectors and the Stato or Province of Dodo Coun Florida and omployed by Arkw ht Mutual Insurance Com of Norwood MA.have inspected tho components described ln this Ownor's Report during the period O~I'nd state that to the beet of my knowledge and belief.the Owner has performed examlnaUons and taken corrocUve measures described in this Owner's Report ln accordance with the requirements of ASME Code, Soction XI.By signing this cerUflcate neithor the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this InspocUon.
Factory Mutual System Commissions 4958 Nasonal Soord, Stats, Prwhce, orx}Fndonenents Date~+0 19 cP
~~QO~Q~%%QO Q~&a eNO~~~~~~~~~I~I~~~~~~I I~~I~~~I~~~~~~~~~~~~~~~~I.~e~~~~~~~~~~~~~~~~~~~~~~~~~~~~~e~~~~'~~~~~~~~'I~~~~~~~~~~~~~~~~~~~~~~'~~~~~~e d@., graf H~~I.e~~~~~e II~~~~'~.~~~~.~~~~~.~~~~II~~~~~~~~~~~~~~~~~~~~~~~~~~~e~~~~~~~~~~~'~~~'~~~~~~~~
FORM NIS-2 (Bock)Page 2 of 2 Examinations performed by FPL ConstrucVon QuafIty Control personnel.
AppScobto Mawfoctww'o Data Reports to bo attached Quality Group"C".*The designated construction code used only for material, design and fabrication requirements.
CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code, SecVon XL fepa r of fep acemefl Type Code Symbol Stamp N/A Certificate of Authorization No.N A ExpiratIon Date N A Signed/C4J'g ia Ow or Owner's Designee, TIVe CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described In this Owner's Report during the period rJ~to and state that to the beet of my knowledge and belief, the Owner has performed examinaVons and taken corrective measures described ln this Owner's Report in accordance with the requirements of ASME Code, Section N.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or cannected with this InspecUon.
Factoty Mutual System Commissions 4958 Na5onal~State,~oncl Gxlorsenento
~9~$
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMEN7S As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 4 UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT f Horne P.O.BOX 3088 FLORIDA CllY FL 33034 May 24, 1989 Sheet of 1 1 una II4 CWO: A-398 PCM: 88-3 2 PS:-4 1 Repair Orgonixoeon ls.a Ho A4 Ho etc.3.Work Performed by P.O.BOX 3218 FLORIDA CIIY 33034 Type Code Symbol Stamp Authorization No Expiration Date N A 4.Identification of System Intake Coolin Water.('(~(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.IdenNication of Components Repaired or Replaced and Replacement Components Nome of Component Name of Manufacturer Manufacturer Serk I No.Repaired, Reploced, or Replacement Basket Strainer N/A N A N A BS-4-1400 N A Re laced No Basket Strainer Hayward Ind.Produc 38 5 N A BS-4-1400 1 87 Re lac ment No*Basket Strainer N A N A N A BS-4-1401 N A Re la ed Basket Strainer Hayward Ind.Products Inc 28225-3 N/A BS-4-1401 1987 Replacement No*7.Description of Work construction code used for material, desi n and fabrication re uirements, onl 8.Toata Canduntad:
Nt(drostatto Pnsumatta NomInal Oparatlng Prsssura XX Olhsr..,~/*ree's F A System Leakage Test was performed on mechanical joints, no welded)oints were involved in scope of work.Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size Is 8 1/2 in.11 ln(2)Information ln items 1 through 6 on this report Is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form.
FORM Nls-2 (Back)Page 2 of 2 Examinations porformed by FPL ConstrucUon QuaHty Control personnel.
hppllcoble Maoutochrer'e Data Reparte to be attached Quality Group nC CERllRCAlE OF COMPUANCE We cortify that the statements made ln the report are correct and this to the rules of the ASME Code,Section XI.conforms rapa r or rep acaman Typo Code Symbol Stamp N/A Certificate of AuthorfzaUon No.N A Expiration Date f:?m-Er~=me~ner or r's Designee, Title.197 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a vaHd commission issued by the National Board of BoHar and Pressure Vessel Inspectors and the Stato or Province of Dade Coun Florfda and omployed by Arkwrf ht Mutual Insurance Com n of Norwood MA have inspocted the components descnbed In this Owner's Report durfng the perfod A 5 i'P to and state that to the best of my knowledge and be0ef, the Owner has performed examfnaUons and token corrective measures described in this Owner's Report ln accordance with the requirements of ASME Code, SacUon XI.By signing this cartiflcato neither the Inspector nor his employer makes any warranty, expressed or lmpHad, concerning the examinations and corroctlve measures descrlbod ln this Owners Roport.Futhermore, neither the fnspactor nor his employer shall be Habfe in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with thfs inspocUon.
Factoiy Mutual System Commissions 956 Nattcaol Board, State,~and Eodo~erite FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 6c LIGHT Name P.O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT 2.Plant Name P.O.BOX 3088, FLORIDA CITY, FL 33034 dress 3 Work performed by FLORIDA POWER 4 LIGHT Nome P.O.BOX 3088 FLORIDA CITY FL 33034 Address Date 5 31'9 Sheet 1 ol 1 Unit PWO 1019 NCR 88-0248 Repair Organization ip.a.No.~Job No.etc.Type Code Symbol Stamp N/A Authorization No.Expiration Date 4.Identification of System wtr 5.(a)Applicable Construction Code 5 31.1 tp 55 Edition~MA Addenda,~NA Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built ASM'epaired, Code Replaced StamPed Or Replarement (Yes<<MainFeedwat r LOO"B" N/A N/A N/A N/A N/A.Repaired No 7.Description of Work 8.Tests Conduc ted: Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks ual i t GrOu"8" Applicable Manufacturer's Data Reports to be attached All weldin erformed in accordance with FP8L weld control manual and site rocedures.
CKRTFICAlE OF COI4%IANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.r pai or replacement conforms Type Code Symbol Stamp N A Certificate of Authoriza'N Signed Owner or Owner's Designee, litle Date CGlTI'ICATE OF NSERVICE l4SPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com an Dade Coun Florida and employed by of Norwood, MA.have inspected the components described in this Owner's Report during the period to JUAN A , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
tnspec Signature Dat~+19 Commissions Factory Mutual System 4956 N I Page I of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT Name P.O.BOX 529100, MIAMI~FL 33152 Address TURKEY POINT 2.Plant Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Date 6/1/89 Sheet 1 of Unit 4 Repair Organization P.o.No..Job No.etc.Type Code Symbol Stamp N/A Authorization No.Expiration Date Worl<Performed by FLORIDA POWER 8c LIGHT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Address 4.Identification of System Residual Heat Removal 5.(a)Applicable Consicacdon Code B31.1 ip 555didon~NA Addenda, B/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired ar Replaced and Replacement Components Name of Component Check Valve Check Valve Check Valve Name of Manufacturer Anchor Darling Anchor Darling Anchor Darling Manufacturer Serial No.N/A N/A N/A National Board No.N/A N/A N/A Other Identification Tag 8 4-876A Tag 4-8768 ag 4-876C Year Built N/A N/A N/A Repaired, Replaced, or Replacement Replacement Replacement Replacement AS ME Code Stamped (Yes or No No No 7.Description of work Re laced bonnet studs and nuts on the above valves.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure.Other Pressure 2335 psi Test Temp.547 Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (BCICk)Page 2 of 2 9.Remarks ual it Grou A Applicable Manufacturer's Data Reports to be attached CERTFICATE OF COLNtUANCE We certify that the statements made in the report are correct and this I"e 18CemeAt conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp Certificate of Authorization No.N/A Expiration Date N/A Signed ar.Owner or Owner's Designee, Tit!e Date CERTlRCATE OF NSERVICE NSPECTION I, the undersigned, holding a valid commissioft issued by the National Board of Boi!Br and Pressure Vessel Inspectors and the State or Province of Dade Count Florida and employed by Arkwri ht Mutual Insurance Com an of'corwood, MA.have inspected the components described in this Owner's Report during the period to P , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in occordance with the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective rneosures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be lioble in any manner for any personol Irljury or property damage or a toss of any kind arising from or connected with the inspection.
inspec Signature Dat~~19 cp Commissions Factory Mutual System 4956 N I National Board, Stote, Province, ond Kndorseme Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACFMENTS As Required by the Provisions of.the ASME Code Section XI FLORIDA POWER 8c LIGHT Nome P.O.BOX 529100, MIAMI, FL 33152 Ad dree e TURKEY POINT 2.Plant Nanle P.O.BOX 3088, FLORIDA CITY, FL 33034 dress Work Performed by R ORIDA POWER 4 LIGHT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Addreee 4.Identification of System h1ain Steam Date 6 5/89 Sheet 1 of 1 Unit 4 NCR 89-0227 PWO 9950 Repair Organization P.a.No.~Job No.etc.Type Code Symbol Stamp N/A Authorization No.N/A Expirotion Date/A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Camponent Hain Steam Header""" Name of Manufacturer Unknown Manu fac turer Serial No.Unknown National Board No.Unknown Other Identification, N/A Year Built 1968 ASM'epaired, Code Replaced, Stamped or Replacement (Yes or Repaired Yes 7.Description of work Re aired base metal linear indications b removal with li ht grinding.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure ps i Test Temp.Degree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X llin., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recarded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks Pipin iS equality GrOup"8" Applkable Manulacturer's Data Reports to be attached CERTFICATE OF CCAPUANCE We certify that the statements made in the report are correct and this I epaiI repair or replacement to the rules of the ASME Code,Section XI.conforms Type Code Symbol Stamp N/A Certificate of Authorization N/A Expiration Date N/A Signed Owner or owner's assignee, Title Date CERTFICATE OF%SERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count Florida I e Arkwri ht Mutual Insurance Com an of and employed by Norwood, MA.hove inspected the components described in this Owner's Report during the period to~ai 8'F , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in'this Owners Report.Furthermore, neither the inspector nor his employer shall be lioble in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
pector's Signature Commissions Factory Mutual System 4956 N I National Board, State, Province.and Endorsements Dat e FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 529100, MIAMI, FL 33152 lsddress TURKEY POINT 2.Plant Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 dress Performed by R ORIDA POWER gtc LIGHT Nome P.O.BOX 3088 FLORIDA CITY FL 33034 Address 4.Identification of System Dote 6 5 89 Sheet 1 oi.1 Unit 4 PWO 1456 Repoir orsonizotioTT p.o.No..Joo No.etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date s.(a)Applicable Construction Code 8 31.1 ig 55 Edison~it A Addenda,~pt A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufac turer Manufacturer Serial No.National Boord No.Other Identification Year Built Repaired, Replaced, or Replacement ASM'ode Stamped (Yes or Control Valve Copes Vulcan N/A N/A Taq C V-" 4-311 N/A Replacement No 7.Description of w"%e laced one 1 1/8"X 5 5/8" Bonnet to bod stud on CY-4-311 8.Tests Conduc ted: Hydrostatic Pneumatic Nominal Operating Pressure X Other Pressure ps i Test Temp~Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, ond'(3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks u811 t Grpu"A".ppplicoble Manufacturer's Data Reports to be attached No we1din erformed CBPHCATF.OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repa'r or replacement conforms Type Code Symbol Starn'p Certificate of Authorization
~A Expiration Oate Signed owner or owner's Designee, 1itle Oate gp-, 19~CKRTlRCATE OF NSKRVCK 0%$%CTIOH I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com an Oade Coun Florida and employed by of Norwood, MA.have inspected the components described in this Owner's Report during the peri P'o d'and state that to the best af my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance wtth the requirements of ASME Code,Section XI.By signing+@cerificate neither the inspector nor his employer makes any warrany.expressed or implied, cancerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
In tor's Signature Oat~~19 Commissions Factory Mutual System 4956 N I National Boord, State, Province, and Bndorsements
~3 5~0'~~~~~~~~I~~~~~~~~~~~~~~I~I I a I~II III'~I~~~~gp go g-og~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~4~~~~o I~t R: IS: r m L 58 RR t RR t IS RR~~~~~~~~~~~~~~~~~~~~'~o~~~.~~~~~I I.~II~~I~I~~~~~~~~~~~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~
FORM NIS-2 (Back)Poge 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
ppp4cobb Qanur~Data Reports%be etbxhe4 All Melding performed in accordance with FP&L Weld Control Manual and Site Procedures.
QUALITY GROUP"A".CERTIFICATE OF COMPLIANCE Vfe certify that the statements made ln the report are correct and this ta the rules of the ASME Code, SecUon XL fepa r or re Type Code Symbol Stamp N/A Certificate of Authorization No.Signed]4~=s'~m~~Expiration Date Date~7,$9 Ow or Owner's Designee, JltJe CERTIFICATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission Issued by the NatJonai Board of Boiler and Pressure Yessel Inspectors and the State or Province of Dade Coun Fiotida and employed by Arkw ht Mutual Insurance Com n of Norwood MA.have inspected the components described ln this Owner's Report durfng the period and state that to the beet of my knowledge and belief, the Owner has performed examinations and taken corrective
'measures described ln this Owner's Report ln occordance with the requirements of ASME Code, Section JQ.By signing this certificat neither the inspector nor his employer makes ony warranty, expressed or Implied, concerning the examinations and conectJve measures described ln this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any persona1 JnJuty or property damage or a Joss of any kind.arising from or connected with this inspection.
Facbwy Ltutual System Commissions 958 Ha5onaI~SteSs,~and figl~te Date i9~P Poge 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPL'ACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER tie LIGHT Name P.O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT 2.Plant Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Work Performed by FLORIDA POWER 6c LIGHT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Address Date 6-7-8 Sheet I of Unit Repair Orgaftiratioa P.a.No.~Joa No.etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date 4.Identification of System REACTOR COOLANT SYSTEM (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component delief Valve Name of Manufacturer Crosby Valve 8i GAGE CO.Manufacturer Serial No.1580 National Board No.N/A Other Identification ag RV-4-551B Year Built N/A Repaired, Replaced, or Replacement Replaced ASM'ode Stamped (Yes or No Relief Valve Crosby Valve 8i GAGE CO.69877-00-00 4 N/A ag RV-4-551B N/A eplacement No 7.Description of work Re laced ressurizer Relief Valve and one stud on inlet flan e.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure X Other Pressure psl Test Temp ftnZ Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
9.Remarks gua1ity GrOuP A FORM NIS-2 (Back)AppliCable Manufacturer's Data Reports to be attached CERTFICATE OF COL%%JANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No Signed wner or Owner'esignee, Title Date PP, 19 CEITfl'ICATE OF NSERVICE NSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com an Dade Caunt Florida and employed by of Norwood, MA.have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
pector's Signoture Commissions Factory Mutual System 4956 N I Notional Board, Stote.Province, ond Endorsements Dat 2 19 Page 1 of 2 FORM NIS-2 ONNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0FLORIDA POWER dc tjGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 30SS FLORIDA CITY FL 33034 Date 6-13-89 Shoot of Unit 4 CWO:Dl-2946 Repolr Organhothn P.L HoJob No etc.3.Work Performed by I Type Code Symbol Stamp Authorization No P.O.BOX 321S FLORIDA CITY FL 33034 Expiration Date.Identification of System Intake Coolin Water S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Repiacemont Components Name of Component Name of Manufacturer Manufacturer Serfai No.National Board No.Year Built Repaired.Replaced, or Replacement Turbine Plant C/W"A" rbine Plant W B N/A N/N/A N/A N/A N/A N/A N/A N/A N/A Replacement No Replacement No Description of Work Added racks to corn onent su orts H-704-02 and H-704-06, for the purpose of storing valve handwheels when not in use.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure psl Test Temp.agree's F: Supplemontal sheots in form of lists, skotches, or drawings may be usod, provided (1)size is 8 1/2 in.11 in(2)Information in items 1 through 6 on this report is Included on oach shoot, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form, FORM Nls-2 (Back)Poge 2 of 2 Exominations performed by FPL Construction Quality Control personnel, Ppp5coble Manufacturer's Dabs Reports to be attached All welding performed in accordance with the FPL Weld control manual, and site procedures.
Quality Group<<C<<CERllRCA1E OF COMPUANCE We certify that tho statements made in the report are correct and this Re lacement to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Typo Code Symbol Stamp N/A Certiflcato of Authorization No.Expiration Data Sig nod 5-ivy r or Owner's Designee, TiUo Date 5-f b, 19 f Bo CERllRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by tho National Board of Boilor and Pressure Vessel Inspectors ond the State or Province of Dade Coun Rorida and employed by Arkwrl ht Mutual insurance Com n of have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the nor has performed oxaminotions and taken corrocUve measures described in this Owner's Report in accordanco with tha requirements of ASME Code, SacUon N.By signing this carUIIcato neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correcUva measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable ln any manner for any personal injury or property damage or a toss of any Idnd arising from or connected with this inspection.
Factory Mutual System Commissions 4956 I Nathnal Boanf, Stets,~ond Endorsernente 19 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOIE REPAIRS OR REPLACEMENTS As Required by the Provisions of toe ASME Code Section XI FLORIDA POWER dc UGHT Nam>>P.O.BOX 529100, MIAMI.FL 33152 Addrgao Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Date Sheet of Unit 4 P.S.89-273 PCM: N/A Rttpalr Organhatlon P.o.No., Job No., ota.3.Work Performed by C CO U TION N~Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA CllY FL 33034 Expiration Date N A Address Com onent Coolin Water S stem.o)~>>-~"--*'" 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component CCW piping om 4P200C Name of Llcnufccturer N/A Manufacturer Serial No.N/A National Board No.N/A Other identification N/A Year Built N/A Repaired, Replaced, or Replacement Replacement ASME Code Stamped (Yoe or No No Replaced base plate on existing pipe support 4-ACH-158." 8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/tt Pressure psi Test Temp.egree's F TE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Bock)Page 2 of 2 0 Examinations performed by FPL Construction Quality Control personnel.
PppRoble Manufacturer's Data Reports to be attached All welding performed in accordance with the FP&L Weld Control Manual and site rocedures.
ualit Grou'C'.CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.Re lacement confarms repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed gpJ Z>rc A&c.pgm Owner Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period 8 S/9e to r J=5'P and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this ce tificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and correcUve measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecUon.
Signature Date Zd 19 et'~Factory Mutual System Commissions 4956 N I Haeonol Board, Stats,~and Endoreanents
~~~a 0 W~~~~'~~~~~~~~~II~)III~~I~~~~~~~I U~~~I U~~~~~~~~~~~I~~~~~~I~~~~~I~~~~U~'~~~~~~~~~'~~~~~'~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I E t~I E~R I~'~~II~~~~~~~~~~~~0~~~t~~~'~~~~~~.~~~~I~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Pyp5coble Manrrfoctrrrer's Dato Reports to be attached r o m d n a orda e wi h the FP&L Weld Control Manual and si,te procedures.
uali.t Grou'C'.CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.RePlacement conforms repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date Signed/mw pi~-/K~Owner r wner's Designee, Title~-r~,~9~~CERllFICATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period'I to/and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.Dy signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor, his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 N I Natbnol Boord, State,~and Endcrsemente
~s nabrie 80 19~7
~~l~~4~~~~I I~I~~4~~~~I~~~~-~~~aH~IMki~~~~~~~~~~~I~~~~~~~~~~~~~~~~~4~~~~~~~~~~~~~'~~~~'~~'~~~~'~~~~~~~0~~~~~~~~~~~~~~~~~~~~~~~~ll~~~R i i 5 R~..~~~~~~~~~~~'~'I~~~~~~I.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FORM NIS-2 (Back)Page 2 of 2 9 Rema~Examinations Performed by FPL Construction Quality Control Personnel.
Ppplkab4 Manufacture Data Reports to be tttocheci ualit rou'A'.CERTIFICATE OF COMPUANCE We cerUfy that the stateinents made In the report are correct and this<<~B<<<<<<conforms to the rules of the ASME Code, SecUon XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A ExplfaUon Date N A Signed g~Srr<&a~.ner or wner's Designee, TrUe 0 CERTIFICATE OF INSERVICE INSPECIlON I, the undersigned, holding.a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Florida and employed by Arkw ht Mutual Insurance Com n have Inspected the components described fn this Owner's Report during the period.N 8'o Wr'f 4 Pc5 and state that to the best of my knowledge and belief, the Owner has performed examinaUons and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerUficate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
Factory Mutual System Commissions 4956 Nat4nal Soon5.Stats,~ans End~s Date 4 Z.)9~/
Page 1 of 2 FORM NIS-2 OWNER'SREPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 529100, MIAMI, FL 33152 Date 6-19-89 Sheet 1 of Address TURKEY POINT 2.Plant Nafne P.O.BOX 3088, FLORIDA CITY.FL 33034 dress Unit PWO 2319 2313 NCR 88-107 Repair Organization p,a.No., dob No.etc, Work Performed by FLORIDA POWER if'IGHT Name P.O.BOX 3088.FLORIDA CITY.FL 33034 Address 4.Identification.
of System Reactor Coolant Type Code Symbol Stamp Authorization No.Expiration Date S stem N/A.~N,./(b)Applicoble Edition of Section XI Utilized for Repairs or Replocements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Name of Manu fac turer Manufac turer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement AS ME Code Stamped (Yes or Globe Valve N/A N/A N/A Tag¹455B abandoned v v)N/A Replacemen No 7.Description of work Replaced studs and nuts on abandoned Valve 455B, pressurizer spray line.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure X Other Pressure 2335 psi Test Temp.557 Degree's F OTE: Supplemental sheets in form of lists, sketches, or drawings moy be used, provided (1)size is 8 1/2 in.11in'2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is rnbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks Com onent is (}ua'tity-Group"A" Applicable Manufacturer's Data Reports to be ottached CERTFlCATE OF CXSFUANCE We certify that the statements made in the report-are correct and this rep taCement conforms to the rules of the ASM'ode,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Owner or Owner's Designee, TiUe CERTI'ICATE OF NSERVICE SSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count Florida and employed by Arkwri ht Mutual Insurance Compan of Norwood, MA.have inspected the components described in this Owner's Report during the period to J'and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASM'ode,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property-damage or a loss of any kind arising from or connected with the inspection.
ins ctor's Signature Dat~19+Commissions Factory Mutual System 4956 N I National Boord, State, Province, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT Name P,O.BOX 529100, MIAMI, FL 33152 Addrc55 TURKEY POINT 2.Plant Name P.O.BOX 3088, FLORIDA CITY, FL 33034 rAddre55 Date 6 20 89 Sheet i of Unit 4 Repair Organization P.O, No., Job No.ctc.Work Performed by FLORIDA POWER tIc LIGHT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Address 4.Identification of System Residual Heat Removal Type Code Symbol Stamp Authorization No.Expiration Date N/A 5.(a)Appiicaote Construction Code 55t~t tp tEZEdidon~NA Addenda,~NA Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Name of Manufac turer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASM'ode Stamped (Yes or Pump Westinghouse 67F68604 N/A 4P210A N/A Repaired No 7.Description of work Weld re aired base metal linear indications on 4A RHR pump stuffing box extension.
8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is~umbered and the number of sheets is recorded at the top of this form.
~.FORM NIS-2 (Back)Page 2 of 2 9.Remarks Col onent is Quality Group"B" AppliCable Manufacturer's Data Reports'o be attached CERTFICATE OF COltNlUANCE We certify that the statements made in the report are correct and this repa>r'onforms repas'r replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Owner or Owner's Designee, Title Expiration Date Date , 19~i CERTFlCATE OF NSERWCE WSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count Florida and employed by Arkwri ht Mutual Insurance Compan of Norwood, MA.have inspected the components described in this Owner's Report during the period t.J s-, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASM'ode,Section XI.By signing this cerificate neither the inspector nor his employer makes any worrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
lns tor's Signature Dot z 19~4P Commissions F".c tory Mutual System T56 N I Notional eo d, stote, province.ond Endarsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER ssc LIGHT Name P,O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT Naillc P.O.BOX 3088, FLORIDA CITY, FL 33034 dress Work Performed by FLORIDA POWER gk LIGHT Na ale P.O.BOX 3088 FLORIDA CITY FL 33034 rttddrCSS Date 62089 Sheet 1 of Unit PWO 1410 Itcpair Organization P.O.No., Job No.ctc.Type Code Symbol Stamp N A Authorization No.N/A Expiration Date 4.Identification of System Intake Cool i'n Water (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built ASM'epaired Code Replaced, StamPed or Repla.ement (Ycs or Check Valve Check Valve N/A N/A: N/A N/A hlission Val e W6732 Tag Ih'-50-331 Tag III 4-50-331 N/A N/A Replaced No eplacement No 7.Description of work Re laced valve at ta location 4-50-331 8.Tests Conduc ted: Hydrostotic Pneumatic Nominal Operating Pressure X Other psl Test Temp~Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (BCICk).Page 2 of 2 9 Remarks Component i s qua 1 i ty Group C Applicable Manufacturer's Onto Reports to be attached CERTFICATK OF COI4%3ANCK to the rules of the ASME Code,Section XI.conforms Type Code Symbol Stamp N A Certificate of Authorization No N/A Expiration Date Signed wner or owner's assignee.Title Date CERTPICATE OF NSERVICE NSPECTION ,,Ithe undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Cornpan of" Norwood, MA.,have inspected the components described in this Owner's Report during the period to z>9p , and state that to the best of my knowledge and belief, the Owner has performed examinations and token corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this<<erificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
Dat~~19 actor's Signature Commissions Factory Mutual System 4956 N I Notional Board, State, Province, and Endorsernents
~~0~a~0 W R W~%%0~~0~~I~I~~~~~~'I~~~I~~~~II~~~~0~~~~~~~~~~~~~~~)~~~~~II~~'~~~~~~~~~'~~~~~~~~~~~~~~~~~'~~'~~~~~'~~~~~~~~~~~~~~~~~~'~~~~~~~0~.I~II II RR~~~~~~~~II~~~~~'I~~~.~~~~5 I~I.~~~~~~~~~4~~'~~~~~~~~~t~~~~'~~~~~~'~~~~
FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
Pypllcobie Manufoctorer'e Data Reports to be attached All weldin was erformed in accordance with FP&L Weld Control Manual and Site Procedures.
Quality Group"A".CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this'o the rules of the ASME Code,Section XI.Re lacement repair or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed~7 P~~5-ir~Owner Owner's Designee, Trtle 7 28]9/CERTIFICATE OF INSERVICE INSPECTiON I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period c./FFP to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
to e StgoatMre Date+~19~Ps'actory Mutual System Commissions 49S6 N I Nattonat Board, State.Provhoe.and Endcrsements 0 0 0~p~%&QO 0~R 0 SgO~'~~~'~~~I~~~~~~~I a~~~'~I~~~~~0~~~~~~~~~~~~~I~~~~~II~~~~~'~~~~~~~~~~~~~I~~~~'~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I~~~~~~~~~~~~~~~IR 85 I5 H~II~~~~~~~~~~~~~~~~~~~~I R~~~~~~~~~~.~.E~.~~~~'I~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~'~~~~'~~'~~t~
Page 2 of 3 FORM NIS-2 (Back)Examinations performed by FPL Construction Quality Control personnel.
Applicable Monufocturer's Doto Reports to be ottochert All Weldin was erfo m d procedures.
QUALITY GROUP"C".*Process Sheets89-042, 89-043,89-044 89-045 and 89-046.CERTlRCATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACBfENT to the rules of the ASME Code,Section XI.repair or rep ocemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date Signed~~r~~PZ~~cr C'cAr.~<~F~~i~~Date~,/D ner or Owner's Designee.TIUe I-Z, 19~1 CERTIFlCATE OF iNSERVICE INSPECTION I, the undersigned, holding a valid commission, issued by the National Board of Boiler and Pressure Vessel Inspectors ond the State ar Province of Arkwri ht Mutual Insurance Com n Dade Coun Rorido of and employed by have inspected the components described in this Owner's Report during the period to e.7 and state that to the best of my knowledge and belief, the Owner has performed exominations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the lnspectar nor his employer shall be liable ln any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Foctoiy Mutual System Commissions 4956 N I bspector's Nosooot score State.Pmvbce ond fidorsernrrrrts Date Z 19 P y QO P~Q P Q 0 0 t~P~~~~~~~~0'I~~~~~~'I~~~~~~~~'~~I~~~~~~~~~~4~~4~II~~~~~~~~~~0~~'~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~II~~gg.l X L X t l i R l~'~~~~II~I~~~
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 529100, MIAMI, FL 33152 Addrc55 TURKEY POINT 2.Plant N ante P.O.BOX 3088, FLORIDA CITY, FL 33034 drc55 Date Sheet~of Unit 4 PWO 2014 Repair Organization P.a.No., Job No.ctc.3 Work Performed by FLORIDA POWER 4 LIGHT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Addrces 4.Identification of System Type Code Symbol Stamp Authorization No.Expiration Date e Co trol N/A 5.(a)Applicable Construction Code 8 31.1 ta 55 Sdition~NA Addenda,~NA Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repoired or Replaced and Replacement Components Name of Component Control Valve Name of Manufac turer Copes Vulcan Manufacturer Serial No.N/A National Board No.N/A Other Identification Tag 5'V-4-310A Year Built N/A AS ME RePaired, Cade Replaced, Stamped or Replacement (Yds or Replacement No 7.Description of work Re laced one 1 1/8" X 5 1/8" bonnet to body stud on CV-4-310A 8.Tests Conduc ted: Hydrostatic Pneumatic Nominal Operating Pressure X Other Pressure 2335 psi Test Temp.547 Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks Applicable ManufactureCs Data Reports to be attached No we1dln erform d CERTFICATK OF COLPUAHCE We certify that the statements made in the report are correct and thisl 18Cemeflt to the rules of the ASME Code,Section XI.conforms Type Code Symbol Stamp Certificate of Authorization o.Expiration Date Signed Owner OwneCs Designee.Title Date CERTHCATE OF ItSERVICE NSIsECllON
'I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun vu Arkwri ht Mutual Insurance Com an Florida of and employed by Norwood, MA have inspected the components described in this Owner's Report during the period HP'o Fd'and state that to the best of my knowledge and belief, the Owner has perfarmed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and carrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
ln ctor's Signoture Dot+~19~8 Commissions Factory Mutual System 4956 N I National Board, State.Province, and Endorsements
~~~~~~~'~~~~~~~I~o~~~~I~"~I~~~~o~~~o I o~~o~IE~~~~~~~~~~I~~~I~~~~~I~~~~o~~~I'~~~~~'~~~'~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~I~~lo o lo m m~~L l'l I I W 1 m M~~~~~~~~~~o~~~II~~~II~~~~'~~~~.~~m~~~~~.~~~~I~I~~I~~~'~~~~~~'~~~~'~~~~~~~~~~'~~~~'~~~~'~~'~~~~
FORM Nls-2 (Back)Page 2 of 3 Page 2 of 2.Examinations performed by FPL Construction Quality Control personnel.
Ppprcoble Ilonufocturei'e Doto Repxts to be attached All weldin rform and Site Procedures.
Quality Group'C'.*Relief valves manufactured and stam ed in ac ord nce to ASME VIII, 1986 Edition.Piping installation was in accordance to ANSI B31.1, 1986 Edition, 1988 Addenda.CERTIFICATE OF COMPUANCE We certify that the statements mode in the report are correct and this conforms to the rules of the ASME Code, SecUon XI.repa r or repacemen I Type Code Symbol Stamp N/A Certificate of Authorization No, N A Expiration Date Signed 1,J p~c CoNsr.sued u's'o/Z Date Owner or Owner's Designee, TrUe CERTTRCATE OF INSERVICE INSPECllON I, the undersigned, holdingaa valid commission issued by the National Board of-Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period to c a 9 J=and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective meosures described in this Owner's Report in accordance with the requirements of ASME Code, Section N, By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures described In this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Date 1 9~1F Factory Mutual System Commissions 4956 N I NoS+4 Boont State, piovtnce, ond Endaieemente
~I30 e I~0~+P I~5~~~~~~~~~~)~~'~~I~~l~~~~~~~~~4~~~~~~~~~~~~~~~~~~~~~4 I~~~~~~~~~~~~I~~~~~~'t~~~~~~~~~~'~0~~~~~~~~~~~~~~~'~~~~~mm RS L L RR RS m g5-m H~I t~~~~L I~II II II 55 W RR 55)i i i~~~~~~~~~~~t~~\
- ~*
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER std LIGHT Nome P.O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT 2.Plant NOme P,O.BOX 3088, FLORIDA CITY, FL 33034 dress Date 8 4 89 Sheet 1, of Unit 4 P 2209 NCR 89-0288 P S89-582 Repoir Orgonizotion p.a.No.~Job No.etc Work Performed by FLORIDA POWER Jc LIGHT Nome P.O.BOX 3088 FLORIDA CITY FL 33034 Address 4.Identificotion of System'n Water Type Code Symbol Stamp Authorization No.Expiration Date N A 5.(a)Applicable Construction Code 831~1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name af Manufacturer Manu fac turer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement AS ME Code Stamped (Yes or Isolation Valve'solation Valve Unknown N/A Henry Pratt N/A N/A N/A Tag 8 4-50-308 ag 4-50-308 N/A Replaced N/A Replacement No No 7.Description of work Re laced valve at ta location 4-50-308.8.Tests Conduc ted: Hydrostatic Pneumatic Nominal Operating Pressure*Other Pressure 17~5 psi Test Temp.ambient Degree's F System Leakage~est NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet,'and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks ual i t Grou"C" Ppplicobie Manufacturer's Data Reports to be attacned Mechanical connections, no weldin erformed.Note*system leaka e test performed b FPL Construction PSTR 4-89-422-003 CHGlFICATE OF COLS'UAIAX We certify that the statements made in th'e report are correct and this re 1aCement conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Own or owner's Designee, TiUe Date CKATTI~TE OF 54SERVCK H$%CZIOM I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com an Dade Coun Florida and employed by of Norwood, MA.have inspected the components described in this Owner's Report during the period to/, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
In ctor's Signature Dat~~19'ommissions Factory Mutual System 4956 N I ItoUonol Boord, State, Province, and Endorsements FLORIDA POWER dc LIGHT Date 8/23/89 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Name P.O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT 2.Plant Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 dress 3 Woi'k Performed by FLORIDA POWER 4 LIGHT Name P.O.BOX 3088 FLORIDA CllY FL 33034 Address 2 4.Identification of System Safet In eCtiOn Sheet 1 of Unit 4 PWO 2765, NCR 89-0113, DEEP 89-0177 Repair Organization P.O.No..Job No.etc Type Code Symbol Stamp N/A Authorization No.Expiration Date 5.(a)Applicable Construction Code N/A 19 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition af Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addendo 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASM'ode Stamped (Yes or Pump Worthington 1613239 N/A Tag¹4P215A Est.1970 Repaired No 7.Description of Work Re aired baSe metal CraCk b re 1aCin defeCtiye SeCtipn Of i e.Re laced weld connection with a threaded connection added mechanical connection to facilitate o'ring replacement.
8.Tests Conduc ted: Hydrostatic Pneumatic Nominal Operating Pressure" Other Pressure 200 psi Test Temp~NA Degree's P NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X llin,~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recarded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks ualit Grou"B".Weldin erformed in accordance with FP&L applicable Manufacture s Data Reports to be attached Control Manual and Site Procedures.
CKRTHCATE OF COWUANCE We certify that the statements made in the report are correct and this re air conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N A Certificate of Authorizati No.N/A Expiration Date tj/A'igned ner or Owners Oeiign, Titl Date I A~, 19~CERTICATE OF%SERVICE k4SPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood, MA.hove inspected the components described in this Owner's Report during the period to~e 2/'r, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By.signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
Inspe cs Signature Commissions Factory Mutual System 4956 N I Notional Board, State, Province, and Endorsements Dat FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl FLORIDA POWER 8c LIGHT Name P.O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT 2.Plant Name P.O.BOX 3088, FLORIDA CITY, FL 33034 dress Date 8 23/89 Sheet 1 of 1 Unit 4 Repair Organization ih.a.No.~Job No.~tc.3 Work Performed by FLORIDA POWER 4 LIGHT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Address 4.Identification of System Instrument Air Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A A 5.(a)Applicable Construction Code ANSI 831.I 19 55 Fdition, N/A Addenda, N/A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced ond Replacement Components Name of Component Name of Manufacturer Manufac turer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stomped (Yes or Check Valve Unknown Check Valve Unknown N/A N/A A/A.4-M-)40A NlA Replaced N/A 44a-340A N/A Replacement No 7, Description of Work ed give at-ta location 40-40-340A and associated i in.=r 8.Tests Conducted:
Hydrostatic Pneumatic X Nominal Operating Pressure Other Pressure 190 psi" Test Temp.N A Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks ualit GrOu"B" applicable Manufacturer's Data Reports to be attached All welding performed in accordance with FPL Weld Control Manual and Site Procedures.
CERTFICATK OF COMPUANCE repo's'r replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorizatio o.Expiration Date Signed Owner or ner's Designee.Titie Dote 8 dj, 19~CKRTFlCATE OF INSERVICE HSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood, MA.have inspected the components described in this Owner's Report during the period~~'r , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements af ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations ond corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
Insp s Signotvre Da~>i9~J'ommissions Factory Mutual System 4956 N I National Board, State, Province, and Endorsements Page 1 of 2 p FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 Chner Flciida POtprer Ig Light Name P.O.Box 529100, Miami, FL 33152 Address plant Turkey Point Nefne P.O.Box 3088, Florida City, FL 33034 Address 3.yyork performed by BeChtel COnetruCti On, Ino.Name P.O.Box 3218 Florida Ci t, FL 33034 Address 12/3/87 Sheet 1 of Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N A Unit 4 P.S.87-227 CWO: D1-1967 PCMr 86-211 Repair Organization Ip.O.No., Job No., etc.4.Identification of System-Intake COOlin Water SyStem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 r Editi on, Wi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired,.Replaced, or Replacement ASME Code Stamped I Yes or No)ICV Vafer Check Valve N A tag no.4-50-311 N/A Re laced No ICW Vafer Val TRV V6725 N A tag no.4-50-311 Replace-ment No 7.Description of work Removal and replacement of'he ICW Pump A di scharge check valve and adjoining piping.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure D.Other Qx pressure 21 ps ppsppfpp N~A p SVSCSI!l ZCSSSVSCS r SSS NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided il)size Is SA in.x 11 in., I2)informa-tion in items 1 through 6 on this report is included on each sheet, and I3)each sheet is numbered and the number of sheets is recorded at the top o'.th)s form.f12/82)This Form (E00030)may be obtained from the Order Dept.,ASME,345 E.47th St., New York, N.Y.10017 Page 2 oS 2 FORM NIS-2{Back)9.Remarks Examinations erf'ormed b FPL, Const ru Applicable Manufacturer's Oats Aaports to be attached M~CERTIFICATE OF COMPLIANCE ASME Code,Section XI.rape>r or replacement Type Code Symbol Stamp N/A Certiticate of Authorization No.N/A Expiration Oats N/A Signed-/'I~'ate wnar 0 nar's Oas'a, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board ot Boiler and Pressure Vessel Inspectors and the State of have inspected the components described in this Owner's Report during the period to~~+, and state that to the best of my knowledge and belief, the Owner hss pertormed examinations snd taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner tor sny personal injury or property damage or a loss of any kind arising trorn or connected with this inspection.
lnspac's Signature Factor Mutual 4956 N I National Board, State, Province, and Bndorsamants Date 19'12/82)**Arkvright Mutual Insurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl O ner FlOrida POTPEPer h Light Name P.O.Box 529100, Miami, FL 33152 Oate 12 3 87 Sheet~of 2.Plant Address Turkey Point Unit Name P.O.Box 3088, Florida City, FL 33034 Address 3 work performed by Bechte1 Construction, Inc.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of System I P.S.87-229 86-211, Repair Organization P.O.No., Job No., atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oate N A ft l Aopeeehte EOElon of SeoSon Xt tfhllted tor Reps're or Reoleoemenm 19 88, ddi Eitsn, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)ICW Wafer Check Valve N/A N/A N/A tag no.4-50-331 N/A Replaced No ICW Wafer Check Valve TRW W6730 N/A tag no.4-50-331 N A Replace-ment No 7.Descriptionof work Removal and re lacement of CW P and adjoining piping.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q.Other's Pressers~pet Test Temo.2gB'9 System Znservice Test NOTE: Supplemental sheets in form of Ilats, sketches, or drawings may be used, provided (1)size is B)(in.x 11 in., (2)informa-tion in Items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top e'h(s form.(12/62)This Form (E00030)may be obtained from the Order Oept., ASME,345 E.47th St., New York, N,Y.10017 Page 2 of'FORM NIS.2 (Back)9.Remarks Zxami nati ons erformed b FPL Construe Applicsbls Manufacturer's Dsts ftsports ta be attached Quality Group C.CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this conforms to the rules of the ASME Code,Section XI.reps r or replacement Type Code Symbol Stamp N/A Signed ner or wn r's Desi Certificate of Authorization No N/A Expiration Date/goj.g/T~e, Title N/A g7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler snd Pressure Vessel Inspectors and the State or Province of and employed by*of ave inspected the componenlS described in this Owner's Report during the period ta P.<zS'snd state that to the best of my knowiedge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss af any kind arising fram or connected with this inspection lnsps r's Signature Commissions Pactor Mutual 4956 N I National Board, State, Province, snd Endorssmsnts Date i'd"{12/82I*~Arkvright Mutual Insurance Company Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power 8 Light Name P.O.Box 529100, Miami, FZ 33152 Address Pate Sheet 1 of plant Turkey Poi nt Name P.O.Box 3088, Florida City, FL 33034 Address 3'cwork performed by BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address Unit 4 NCR-C-582-87
~-2081 PCMr N A Repair Organization P.O.No., Job No., atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oats N A 4.Identification of system a tor vessel Gas Vent Pi in S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, fti nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other Identilication Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)RV ea Piping N/A N/A N/A Repair 7.Qescrlptlon of'cwork Returned weld for the R V Head Vent Zine slip on flange to i ts required configuration.
B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q.Other Q Pressure psi Test Temp.oF NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS In.x 11 tn(2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top e'his form.(12/62)This Form (E00030)may be obtained from the Order Oept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2FORM NIS.2 (Back)g Remk, Examinations erformed b FPL Construe'ua Appllcabla Manufacturer's Data Aeports to be attached Welding performed in accordance with FPL Weld Control Manual and site procedures.
guali ty Group A.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate ot Authorization No N/A Expiration Oate N/A Signed wnar or wnar's e gnaa, Title r CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*at have inspected Pte components described in this Owner's Report during the period to , and state that to the best of my knowledge and beliet, the Own has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury orproperty damage ore loss of any kind arising from orconnected with this inspection.
Date Inspac's Signature IBM~Commissions Factor Mutual 4 56 N I'ational Board, State, Province, and Endorsamants (12/82)<<<<Arkvri ght Mutual Insurance Company Page 1 of 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI oFlorida Power 8 Light Name P.O.Box 529100, Miami, FL 33152 Address 12/14/87 Sheet of 1 I pja<<Turkey Poi nt Unit 4 Name NCR-C-906-87 P.O.Box 3088, Florida City, FL 33034 CVOz Dl-2338 PCM: N/A Address 3.Vyork performed by BeChtel COnStruotiOn ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Oate N/A N/A N A Repair Organization P.o.No., Job No., etc.4.Identification of System Com onent Coolin Pater S stem lhl nppliaaole Eoipo of session xf Uofi eo for Repairs or Repleeements ls 88 Add tips, fpinter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)N A N/A N/A N/A N/A N/A Rep ace-ment No C1 CI Cl ptherZZ pressers~ps'est Temp~NA F 89stsm znssrvics Test"See Remarks NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BN in.x 11 In., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'his form.7.Oescriptionof Work Re laced section of'98 piping between Header A and B to the CC(sr surge tank, due to heavy corrosion.
8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure (12/82)This Form (E00030)may be obtained from the Order Oept., ASME,345 E.47th StNew York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)9.Remarks Examinations erformed b FPL Construction AOPliCabla Manufacturer's Data Reports to be attached Veldin erformed in accordance with FPL Veld Control Hanual and site rocedures.
- Hydrostatic pressure test not performed because of technical specification limitations.
guali t Group C.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of A thorization No.N/A Expiration Oate N/A Signed wnar r 0 nar's Design Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State orProvinceof and employedby
- of have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the reouirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspect's Signature Commissions FaCtOr Hutual 4956 N National Board, State, Province, and Bndorsamants Oate is~>(12/82)"*ArJmright Hutual Insurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power h Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida Ci ty, FL 33034 Oats 12 14 87 Sheet of 1 Unit 4 NCR-C-537-87 CVOr D1-2087 CPWOz 87-113 Address 3'Work Performed by BeCh tel COnS truCti On, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of System Repair Organization P.O.No., Job No., atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 r Edi ti on~Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)N A N A N/A N/A, N/A N/A Replace-ment No 7.Oescriptionof Work*Re laced section of Reactor Head Vent piping, for proper alignrtent.
8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q*Other Q pressure~23 5 pst Test Temp.><7'p*RCS Overpressure Test NOTE: Supplemental sheets in form of lists, sketches, or drawings msy be used, provided (1)size is Bya in.x 11 in., (2)Inforne-tion in items I through 6 on this report is included on each sheet,and (3)each sheet is numbered and the number of sheets is recorded at the top oe this form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)g Remarks Examinations erformed b FPL Constr cti Applicable Manufacturer's Data Reports to be attached Weldin erformed in accordance with FPI Weld Control Manual and site rocedures.
uali t Grou A.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Apthorization No..,W/7: PAg 0 ner Ow Vs Oe ig ee, Title N/A Expiration Date N/A , 19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspected the components described in this Owner's Report during the perio to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal Injury or property damage or a loss of any kind arising from or connected with this inspectio Inspect'ignature Commlssjons Factor Mutual 4956 N National Board, State, Province, and Endorsements Date{12I82)"*Arkvright Mutual Insurance Company Page 1 of 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner Iori da Power E Li ght Name P.O.Box 529100, Miami, FL 33152 Address Oate 1 Sheei~ot P.S.86-245 Repair Organization P.O.No., Joo No., etc.=Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oate N A Address 3.Work Performed by BeChtel COnStruCti On, Ino~Name P.O.Box 3218 Florida City, FL 33034 Address pi>>t Turkey Point Unit Name P.O.Box 3088, Florida Ci ty, FL 33034 4.Identification of system.~Com nent Coolin Water System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 I Edition, Wi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National-Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or Nol N/A N/A N/A N/A N/A N/A ep ace-ment No 7.Description of work Deleted the CCW su l and return piping segments associated with the Primary Shield Coolers.B.Tests Conducted:
Hydrostatic gf Pneumatic Q Nominal Operating Pressure Q Other Q Pressure 165 psi Test Temp.~70'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in., (2)Informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'.this form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)g Remarks Examinations erformed b FPL Constructio
, Applicable Mslhufacturer's Data sseports tb be attached Welding performed in accordance with FPL Weld Control Manual and site procedures.
guality Group c.CERTIFICATE OF COMPLIANCE r ASME Code.Section XI.repair ar replacement Type Code Symbol Stamp N/A Certilicate of Authorizat(on No.N/A Expiration Date N/A ,J.Signed own r or 0 er's esignee,'e CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province ol and employed by**of ave inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, t Own r has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
tnspe r's Signature Commissions Factor Mutual 4956 N 2 National Board, State, Province, and Endorsaments Date IB~V (I2/82I<<*Ark@right Mutual Znsurance Company Page 1 oZ 2 FORM N(se2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 ner Florida Power zfi Light Name P.O.Box 529100, Miami, FL 33152 Address Date Sheet~et 2.Plant Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Unit 4 P.S.86-170 CWO: Dl-1622 PCMz 85-196 Address 3 work performed by Bechtel COnstruction, Inc.Name P.O.Box 3218 Florida City, FL 33034 Address Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 I Edition r Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)N/A N/A N/A N/A N/A N/A Replace-ment No 7.Description of Work l ass line around SV-4-3522.
8.Tests Conducted:
Hydrostatic P Pneumatic Q Nominal Operating Pressure Q Qthet Q p esse e~pp Test Te p,~'p NOTE: Supplemental sheets in form of Ihts, sketches, or drawings may be used, provided (1)size is 8'A in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top oe this form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FQRNj NIS 2,{Back)g Rema<e lacement to the rules of the ASME Code,Section XI.repar or repacemen conforms Type Code Symbol Stomp N/A Certificate of Authorfmtfon No.Expiration Oats Signed.7: t si7o: nag~Ow or Owner's Designee, Title~A&,)gled CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a volld commission Issued by the National Board of Boiler and Pressure Yessel Inspectors and the State or Province of de Coun and employed by Arkwri ht M ual lnsu of 0 C hove inspected the componenets described In this Owner's Report during the period to and state that to the beet of my knowledge and belief, the Owner has performed examinations and taken corrective measures descrfbed In this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descrfbed in thfs Owners Report.Futhermore, neither the Inspector nor hfs employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arfsing from or connected with this Inspection.
tn o stgnoture Dat~19~&Factory Mutual Commissions 4956 I Ha5onol Socet, Stoto, prevhee, ood fnsoreomento Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Pravisions of the ASME Code Section XI FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Date I 25 88 Sh act~of 2 Plant TURKEY POINT P.O.BOX 3 FLORIDA CITY FL 33034 Unit NCR-9I5-86 8~C-4I 8 PCM: 86-024 P~S.86-206 Repoh oryahoeon pAL Ho hk Ho eto.3.Work Performed by Type Code Symbol Stamp Authorization No P 3 8 3 Expiration Date 4.IdentWcatlon of System'lant Coolin Pater S stem ()4>>'""'/I (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Manufacturer Serial No.Repaired, Roplocod.or Roploosrnont I'sol ati on Valve N/A N/A N/A tag no.50-4-3I4 N/A Replaced Automati c I'sol.Va1 ve N/A N/A N/A ag no.50-4-3l4 N/A Rep ace-ment No I'solati on Valve N/A N/A N/A tag no.50-4-334 N/A Replaced No Automatic Zsol.Valve N/A N/A N/A tag no.50-4-334 N/A Replace-ment No 7, Description of Work Re laced existing isolation valves 50-4-3I4 and 50-4-334 with automatic i solation valves.8.Tests Conducted:
-Hydrostatic Pneumatic Nominal Operating Pressure Other x ree's F l System Leakage Test NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 in, X 11 ln(2)information in items 1 through 6 on this report Is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM Nls-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control persannei,~lboble LtonufootureA Data Reports to be attached uali t Grou C.~Note All mechanical joints, no welding involved.CERTIRCATE OF COMPLIANCE We certify that the statements made in the report are correct and this Re lacement to the rules of the ASME Code,Section XI.repa r or rsp aceman conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed ner o wneCs Designee, Title)9CERTIRCATE OF INSERVICE INSPECTION I, the undersIgned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Cou and employed by the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described ln this Owners Report.Futharmore, neither the Inspector nor his emplayer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Factoty Mutual Commissions 4 56 I$9tlobPo Noaonol leant, State, prov}nos, and Endonernente
>g~P'at Afkwrl ht M Ua Insu'n m of 0 have in ected the componenets descrfbed in this Owner's Report during the period//P6'o I and state that to the best of my knowledge and belief, Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY 33034 Date~-25 88 Sheet I of Unit 4 CV: DI-1629 PCM: 85-37 P.S.86-182 Repoh orgcnheeoe pA.No Job Hoego.Type Code Symbol Stamp Authorization No Expiration Date Containment Spray System 3.Work Performed by P 3 8 4.Identification of System'((u'b)Applicable Edition of Section XI UtNzed for Repairs or Replacements 1980, Edition, WInter 1881 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Globe Valve N/A N/A N/A tag no.4-896T Repoitwt.Replaced, or Replacement N/A Replaced ASLIE Code Stamped (Yee or No No 2" l500g Throttling Globe Valve Anchor Darling N/A N/A tag no.4-896T N/A Replace-ment No 7.Description of Work Installed valve 4-896T in a short piping spool from the existing Unit 4 recirculation line to the Suction"A" Containment Spray Pump.8.Tests Conduatsd:
Hydrostatla P Pnsumatta Nemtnal Operatlrnt Pressum Other Pressure psi Test Temp.ree's F ,"" Suction Side=260 PSIG"*Discharge Side=2250 PSIG NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is Included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)page 2 of 2 9 Remarks Examinations perfor med by FPL Construction Quality Control personnel.
Applboble uanutocturw'e Data Iteporte to be attoobed Velding performed in accordance with FPL Veld Control Manual and site procedures.
Quality Group B.CERllRCATE OF COMPUANCE We certify that the statements made In the report are correct and this conforms to the rules of the ASME Code,Section XI.repa r or rep acemen Type Code Symbol Stamp N/A CerUficate of AuthorizaUon No.ExpiraUon Date N A Signed Pgda 5/Fa-.wner or ner's Designee, Tie ,~9>>CERllFlCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of deCo n and employed by Arkwri ht Mutual Insu of orwood MA.have ins ted the componenets described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code, SecUon XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinatIons and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any personal Injury ar property damage or a loss of any kind arising from or connected with this InspecUon.
e StlnatLue DatP~19+~Factory Mutual Commissions 4956 I No@eat Soant, State, ptevhce, ans Endoreemente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl FLORIDA POWER dc UGHT 1 a Owner P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY 33034 Date 1-27-88 dhaat of Unit 4 1-1812 PCM: N A NCR-261-86 Repdr Orgcithaeodt pAL No Job Ho ego.3.Work Performed by Type Code Symbol Stamp Authorization No P 8 Expiration Date h$4nea 4, Identification of System Auxilliary Feedvater S stem'.((a (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identificatio of Components Repaired or Replaced and Replacement Components t Hori zontal Support N/A N/A N/A tag no.4-FVH-1 9A N/A Repair 7.DescriptJon of Work e aired veld discontinuities on su rt 4-Zh'H-19A.
8.Tanto Conduota(h Hydmatotto pnoumotto ttomtnot Opamttnd pmaaum Pressure"(" NOTE;Supplemental sheets ln form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 ln.X 11 in(2)Information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
e FORM NIS-2 (Back)Pago 2 of 2 Examinatione performed by FPL Construction Quality Control personnel.
~llocble ucnufoctttrer'e Octa Reports to be c ttacbett Vending performed in accordance with FPL Veld Control Manual and site procedures.
Quality Group B.CERTIRCATE OF COMPLIANCE We certify that the etatemente made in the report are correct and thte to the rules of the ASME Code,Section XI., repar or repaceme conforms Type Code Symbal Stamp N/A Certificate of Authorization Na.N A Expiration Date Signed Ow~iZO~Zi<~~de p~el'l'w r'e Deeignee Title/a7'19 CERllRCATE OF INSERVICE INSPECTION I, the undereigned, holding a valid commleeion leaved by the National Board of Boiler and Preeeure Veeeel inspectors and the State or Province of Oade Cou and employed by Arkwrl ht M u I ine n of No have tnspeatsd the oomponenets desarthed tn thts Donor's Report dartnp the pertod to and etate that to the beet of my knowledge and belief, the Owne hae performed examlnatlone and taken corrective meaeurwe deecrlbed in thle Owner'e Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the inepector nor hie employer makee any warranty, expreeeed or implied, concerning the examinations and carrectlve meaeuree deecrlbed in thle Ownere Report.Futhermore, neither the Inspector nor hie emplayer ehall be liable in any manner for any pereonal Injury or property damage or a Ioee of any kind arising from or connected with thie inepectlan.
Ill specter'e nctUrs~Date~19~2 Factory Mutual Commieeione 4 56 I r aattonct Ioan4 State.provtnoe.cntt Endorsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CfiY 33034 3.Work Performed by PO BO 3 8 I C 3 g.Identification of System Intake Coolin Date 1 29 88 Shaet~of Unit 4 CWO: Dl-1646 PCM: 85-151 P.S.86-042, NCR-69-86 Repotr organhatlon p.o.No Job No eto.Type Code Symbol Stamp Authorization No Expiration Date Water S stem/A (b)Applicable Edition of, Section.XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Repaved, Reploced.or Replacement CCW Basket Strainer Zurn Industries N/A N/A BS-4-1403 N/A Replaced CCW Basket Strainer Zurn Industries N/A N/A BS-4-1403 N/A Replace-ment No 7, Description of Work Re aired the ICW i in and re laced the CCW Basket Strainer.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other xx Pressure psl~Test Temp.'oe's F N/A System Leakage Test NOTE: Supplemental sheets in form of lists, sketches, or drawings may bo used, provided (1)size ts 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back}Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
9.Remarks Pypttoabte Ltontdaattrrer'e Oato Reporte to be ataoctedd Velding performed in accordance with FPL Veld Control Manual and site procedures.
Quality Group Ce CERTIRCATE OF COMPLIANCE Ne certify that the statements made in the report are correct and this conforms to the rules of the ASME Code, Section Xl: " feparr ol fep acemen Type Code Symbol Stamp NlA Certificate of Authorization No.Expiration Date Signed./.~~~.s~r~W&.wner Owner's Designee, Title CERTIFICATE Of INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the componenets described in this Owner's Report during the period toM~, 7 and state that to the best of my knowledge and belief, the Owner has performed examlnatians and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Date~t9 Factory Mutual System Commissions 4956 N I Na5onal Board.State, rootttnae, and En4oreemente Page 1 of 2 FORM NIS-,2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FlORIDA POWER dc UGHT P.O.BOX 529100 MIAMI Fl 33152 p(ant WRK&POINT P.O.8OX 3088 FlORIDA CI7f Fl 33034 3.Work Performed by P 318 I C Fl304 htrdteee 4..Identification of System Auxi lli ar Feedwater Date Sheet 1 of Unit 4 CWO: D1-1812 PCitfr N A NCR-787-86 Rapah'onrttnhaeon p.o.Ho Job No etct.Type Code Symbol Stamp Authorization No Expiration Date S stem ,.(b)Applicable,Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identlflcatlon of Components Repaired or Replaced and Replacement Components Name of Manufacturer Repaired.or Replooement Hori zontal Support N/A N/A N/A tag no 4-FWH-19B Replace-ment 7, Description of Work Modified existing suPPort.S.Taste Conductors Htrdrostottc pnsumattc Momtnot Oparottntt prsssura Ottrar Pressure l psi Test Temp.ree's F r NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in(2)Information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Appliaoble Lranufacbrrer's Data Reports to be attached Veldin rformed in accordance pIi th FPL h'eld Control Manual and si te procedures.
guali ty Group B.CERTIRCATE OF COMPLIANCE We certify that the statements maderin the report are correct and this Re lacement conforms to the rules of the ASME Code,Section XI.fepall'l'ep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date Signed~I.l4OJ Ss ra~err.0 ner or ner's Designee, Title I 9 k'P CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Co n of Norw MA.have inspected the componenets described In this Owner's Report during the period//~~i l d 4 to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XL By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
~Qrinaturo Date 19~X'actory Mutual System Commissions 4956 N I Nadonat Board Stats, prrnbros.and Endoisements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the PnnRsIons of the ASME Code Section XI FLORIDA POWER 8c UGHT 1.Owner P.O.BOX 529100 MIAMI FL 33152 Date 2 2 88 Sheet t or Plant TURKEY POINT P.O.BOX 3088 FLO IDA CITY FL 33034 Unit 4 CVO: Dl-2234 PCH: N/A NCR-C-8l8-87
~orpatthason pAL No Job Ho eto.Type Code Symbol Stamp Authorization No B 3 8 0 Expiration Date hddnee Identification of System Auxiliary Feedwater Steam Supply System..(rA"""""'r*(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edltlon, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Manufacturer Serhl No.Repelled.Replaced.or Replooement ASME'ode Stamped (Yee or No N/A N/A N/A N/A l988 Replacement No 7 Description of Wop Re laced a section oZ 2" i in that@as art oZ a steam tra to the condenser.
8.Teats canduotad:
Htrdroatotto.
x Pneumotlo Nominal Oparottnrt Praaaura Other t Pressure psl-Test Temp.N A ree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size Is 8 1/2 ln.X 11 ln., (2)information in items 1 through 6 on this report Is Included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
~acable uanufaatttrer'e Oats Reports to be attadwd Veldin performed in accordance with FPL Ve2d Control ltfanual and site procedures.
guali ty Group C.CERTIFICATE OF COMPUANCE.e'p lge certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Sta'mp NlA Certificate of Authorization No.Expiration Date N A Signed l&Z~e,r 6m~ner or ner's Designee, Title ,>gFP t CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Co n of Norwood MA.have inspected the componenets described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the ner h s performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described ln this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Date~~/t 9~'~Factoiy Mutual System Commissions 4 5 I Natonal Board.State, Pnrvtnoe.and Endoreemente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl 1 0~nor FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by P.O.OX 3 8 ORI A 33034 Addrwe~.Identification of System Char in S stem Date 2 29 88 Shaat<of Unit CVO: D1-2489 PCM: N A NCR-C-787-87 Rept'raanhtotlon P.O.No>>4ob He.s etg Type Code Symbol Stamp Authorization No Expiration Date/.'/(b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6, Identification of Components Repaired or Replaced and Replacomont Components Name of Component Manufacturer Serial No.Repaired.or Rephaement Component Su ort Component Support N/A N/A N/A N/A N/A N!A PS-592 PS-592 N/A Replaced 1987 Replacement No No 7, Description of Work Removed incorrectl i nstalled suPPort.RePlacement suPPort i nstalled at the correct location.Two MSAs installed with ori inal design.8.Tasts Oanduatad:
Ht/droatotlo Pnaumotlo Nominal Oparottng Prsssura Other Pressure psl Teat Temp.reer!F N/A NOTE: Supplemental shoots ln form of Ilats, sketchea, or drawings may be used, provfdod (1)size ls 8 1/2 ln.X 11 in., (2)information in items 1 through 8 on this report la included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM N)S-2 (Back)Page 2 of 2 Exominations performed by FPL Construe~on Quality Control personnel.
Applrcoble uanrrfocbrrsr's Octo Reports to be attached Velding performed in accordance with FPI Veld Control Manual and site procedures.
FPL tag numbers for the MSAs are 3-1136 and 3-1137.guali ty Group A.CERllRCATE OF COMPUANCE~tl C We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Expiration Date fi8dW birr Wdx.0<, N A Own r Owner's Designee, Title CERTIFlCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Corn n of Norwood MA.have inspected the componenets described in this Owner's Report during the period 8/.to and state that to the best of my knowledge and belief, the Owner has performed examinations and token corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
D~e Z-i's cd Factory Mutual System Commissions 4956 totksrol Board.Stats.rrovnoe, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Ae Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Date 8heet t or Rant TURKEY POINT P.O.BOX 3088 FLORIDA CITY 33034 Unit 4 CltIOr D1-2180 PCMr N/A NCR-C-795-87 Repdr Oryonhothn p.a.No Job Ho 3.Work Performed by O.B X3 0 Md<we 4.Identification of Syetem Type Code Symbol Stamp Authorization No Expfratton Date Residual Heat Removal System 5, (a)Appffcabfe Conetructfon Cod 8 1~1, 1967 Edition N A endo N A (b)Applfcoble Edition of Section XI Utilized for Repafre or Replacements 1980, Edltfon, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name af Component Gate Valve Velan Manufacturer Serial Na.N/A N/A tag no.4-885 Repaired.Replaced.or Replaoement N/A RePair ASME Code Stomped (Yee or No No 7 Deecrfptfon of Work Seal weld erformed to bonnet to asket of valve.8.Teete Oondueted:
Nydroetatla Pneumatlo Nominal Operating Preee"re Other rr t Preeaure pel Teat Temp.547~ree'e F System Leakage Test NOTE: Supplemental eheete ln form of ffete, eketchee, or drawfnge may be used, prevfded (1)size ie 8 1/2 ln.X 11 inca (2)information ln items 1 through 6 on thie report le included on each sheet, and (3)each sheet le numbered and the number of sheets le recorded at the top of thle form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Applbable Qanufochrsr's Octa Reports to be attached Welding performed in accordance with FPL Veld'ontrol Hanual and site procedures.
Quality Group B.CERTIRCATE OF COMPLIANCE We certify that the statements made"in'the report are correct and this"~ePair to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization.No.
Expiration Date N A Signed Stre M 6 4.Own r r OwneCs Designee, Title Date CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwrl h Mutua In u Co n of orwood MA.have inspected the componenets described in this OwneCs Report during the period to and state that to the beet of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Date hepector's Sgnaturi 19 Factory Mutual System Commissions 4 5 I Nalonot Board, Stats, Pre4noe, and Endorsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 0FLORIDA POWER dc IJGHT P.O.BOX 529100 MIAMI FL 33152 Date shoat t or Unit 4 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY 33034 CWO: D1-2334 PCM: 87-354 P.S.87-243 Roper orprehatktn p.o.No h4 No eto.3.Work Performed by Repelled.Repla ceca ar Replacement Type Code Symbol Stamp Authorization No P 3 8 C 3 0<Expiration Date Identification of System Resi dual Hea t Removal System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Idenilcatlon of Components Repaired or Replaced and Replacement Components Mi ni-Reci rcul ation Piping Pump A Pipe Hanger N/A N/A N/A N/A N/A N/A N/A PS-I 1987 Replacement No 1987 Replacement No Pump B Pipe Hanger N/A N/A N/A PS-1 1987 Replacemen No f W rk Modified the RHR Pump Reci rculati on Lines.Fabricated and i nstal led 7.Description of Work pipe support.8.Tasta Conduotod:
Hydmstotto X Pnaumatto Nomtnal Oporatrnrt Praaaura Othar t Pressure 770 psl Test Temp.roe's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and,the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Applhobl~Manufacturer'e Data Reports to be attached Vel di n rd n e arith FPL Veld Control Manual and site rocedures.
Quality Group B.CERTIRCATE OF COMPLIANCE We certify that the statements madein the report are correct and this Be l nt to the rules of the ASME Code, Section Xl.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed i'~5rr~~64.Owner r Owner's Designee, litle CERTIFlCATE OF INSERYICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Stote or Province of Dade Coun Rorlda and employed by Arkwri h Mutual nsurance n of Norwood MA.hove inspected the componenets described in this Owner's Report during the period c r F to Fa/and state that to the best of my knowledge and belief, the Owner has performed examinations ond taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.
Dat Factory Mutual System Commissions 4956 N I Slonaturs gasohol Bootd, Stats, Prevtnoe, ond Endorsernents i9 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Date Shoat~of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by PO BO 3 8 C FL 33034 4.Identification of System Steam Gener Unit CVO: D1-1642 Pcitf: N A NCR-C-228-87 Repair Orgonhmtke p.a Ho Job Nooto, Type Code Symbol Stamp Authorization No Expiration Date vd wn S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.f IdentiflcaUon of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serfal No.National Bocud No.Repaired, Replaced, or Replacement ASME Code Stomped (Yoa or No N A N A H-422-05 N/A Re air No 7.Description of Work t rned su rt'o its ori inal desi n confi uration.8.Tests Conducted:
HydrostaUc Pn'eumaUc Nominal 0peraUng Pressure Other N/A Pressure psi Test Temp.ree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in(2)informaUon ln items 1 through 6 on this report is included on each sheet, and (3)each sheet ls numbered and the number of sheets Is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel, AppScabb Ilanufacbrrer'e Data Repcrte ta be attached uali t Grou B.CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this Repair to the rules of the ASME Code,Section XI.repair or rep acemen conforms Type Coda Symbol Stamp N/A Certificate of Authorization No, N A Expiration Data Signed g~Jar<H6~.Owner or 0 ner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood MA.have inspected the componenets described in this Owner's Report during the period 7 iP to~<<, rP and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermora, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
, Factory Mutual System Commissions 4956 N I Nasanal Beard, State.Province, and Endoreenrente Date Z a~19' Page I of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI t FLORIDA POWER did LIGHT Norns P,O.BOX 529100, MIAMI, FL 33152 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Adaress Date 4 19 88 Sheet~of Unit 4 PWO 2644/64 Repair Organization P.O.No., Job No.etc.Work Performed by LORIDA POWER&: LIGHT Nanle P.O.BOX 3088 FLORIDA CITY FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A 4.Identification of System COm Onent COO1ing Water 5.(a)'htPtfcabte Constfaction Code B31.1 t9 67Editfon~ff A addenda.~ff.ft Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component CCW Heat Exchan er"A'ame of Manu fac turer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification N/A Year Built N/A ASM'epaired, Code Replaced Stomped or Replacement (Yes or Repaired Yes 7.Description of work Re aired corroded area on North channe1 head door, by we1ding.8.Tests Conduc ted: Hydrostatic
" Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp.Degree's F, NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.t X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks Examinations erformed b FPL ual it Control ersonnel.Wel din Appricable Stanufacturer's Data Reports to be attached performed in accordance with FPL Weld Control t1anual and site procedures.
equality Group C.CERTFICATE OF COI4%JANCE We certify that the statements made in the report are correct and this re air repair or replacement to the rules of the ASM'ode,Section XI.conforms Type Code Symbol Stamp Certificate of Authorizatio No.Signed Owner or Owner's Designee, Title Date I, the undersigned, holding a valid commission issued by the Na!I:nal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com an Dade Count F:a and employed by of Norwood, MA.have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance wiN the requirements of ASME Code,Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.
In ecto's Signature Dat+19~2 Commissions Factory Mutual System 4956 N I National Board.State, Province, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI Fl 33152 Date Sheet~of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CVO: D1-2047 PCM: N/A NCR-C-509-87 Repoh orgonhason p.a.No Job Noeto.3.Work Performed by P BOX 3 18 4.Identification of System Type Code Symbol Stamp Authorization No 3 Expiration Date Residual Heat Removal System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Manufacturw'anufocturer Swhl No.Repaid, Replaced.or Replacement Spring Hanger N/A N/A N/A SR-251 N/A Repai r No 7 Description of'Work Secured base plate by replacing wej-i t anchor bol ts wi th Hi 1 ti anchor bolts.8.Tests Oanduated:
tttrdrastatla
'neumado rtomlnal Operatlnd Pressure Other N/A Pressure psi Test Temp.ree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 ines (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Appltoable uonafacturer'e Data Reports to be ttaobee4t guality Group B.CERllFlCATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repa,r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed Owner ner's Designee, Title CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Arkwri ht Mutual nsu nce Co n Dade Coun Florida of and employed by have inspected the componenets described in this Owner's Report during the period P7 5'a T to~W.Z/'1~7 and state that to the beet of my knowledge and belief, tha Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code',Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
s SgnatLrrs Date W+~19~<8 Factory Mutual System Commissions 4956 N I Nathnat Soon!, Stats, Prwlnoe, and Enaorsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 r FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 e 8/1 2/8 8 Shoot f of P(ant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Unit CWO: Dl-2380 PCM: N/A NCR-233-86 Repair Ofgofthothn P.O.NoJob No etc.3.Work Performed by.0 BO 3218 FLO IDA C 4.Identification of System Type Code Symbol Stamp Authorization No 33034 Expiration Date ake C olin ftrat r stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Inter 1981 Addenda 6.Identificatio of Components Repaired or Replaced and Replacement Components 2" Check Val ve Name of Manufacturer Strata1 o Manufacturer Serial No.N/A National Board No.N/A Other Identificathn Tag No.4-410 Year Built N/A Repaired, or Replacement eplacemen ASME Code Stomped (Yes or No No Replacement oS valve 4-410.7: Description of Work 8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure~/" ree's F System Inservice Test t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Rema~Examinations performed by FPL Construction Quality Control personnel.
PypIIcabIe Manuf~Data Reports to be at¹xhed Re lacement oZ 2" threaded valve.No welding involved.CERTIFICATE OF COMPUANCE We certif'y that the statements made In the report are correct and this~<<a<<ment conforms to the rules of the ASME Code, Section Xl.repa r or rep acemen Type Code Symbol Stamp Certificate of Authorization No.N A N/A Expiration Date N A Signed 68J SI t5/LCcif ner or w r's Designee, Title CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorlda and employed by Arkwri ht Mutual Insurance Com n of orwood MA.have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge ond belief, the Owner ha performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Date+~7$9~/Factory Mutual System CommIssions 495S Nasonal BoanL State, Prwfnoe, and&daeemente Pago 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of tho ASME Code Section Xl 1.Owner P.O.Box 529100 Honw iami Fl.33152 Sheet t of 2 Plant TurkeY Point P.O.B x 3088 Florid Ci Fl.33034 Unit PWO 0462 3.Ork Performed by Florida Power a Li ht Nome P.O.Box 3088 Florida Cit F".33034 4.identification of System Main Steam System Type Code Symbol Stomp N A Authorization No N A Expiration Date N A denda N/A Code Case (b)Applicable Edition of SectJon Xl Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Ilonufoctuiw Serhl No.Yoor BuQt Repaired, Ropiocod.or Repiccoment ASM'ade%omped (yes or No Check Valve koerHng N/A N/A Tag no.10-004 N/A Repa'i red No 7 Description of Pork Weld re air of steam cuts on asket seatin surfaces.8.Teete Conducted:
Hfdmetatfo Pneumatfa Namtnal aperatlntt Preeeura Other 1 N/A Pressure NOTE: Supplemental sheets ln form of Hate, sketches, or drawings may be used, provided (1)size is 8 1/2 in.t X 11 ln., (2)information in items 1 through 8 on this report ls included on oach sheet, and (3)ecch sheet isnumbered and the number of sheets ls recorded at the top of this form.
FORM Nis-2 (8cck)Page 2 of 2 9.Remarks Examinations erformed by FPL Quality Control personnel.
Welding Pyplloobla UosIX~Ossss ltopcvts to bo cusschee performed in accordance with FPL Weld Control Manual and site procedures.
CERTIFICATE OF COMPLIANCE
/We certify that the statements mode in the report are correct and this conforms to the rules of the ASME Code,Section XI.re pa r ol'ep acemen Type Code Symbol Stomp N/A h Certificate of Authorlza o No.N/A N/A er or Owner's Designee, TrUe'Date ,is~CERTIFICATE OF INSERYICE INSPECTION I.the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun and employed by Arkwrl ht Mutual Insura Com of rwood MA.have inspected the components described in this Owner's Report during the period/to cJ and state that to the best of my knowledge ond beIIef, the Owner hos performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer sham be liable in any manner for any personal InJuty or property damage or a loss of ony kind arising from or connected with this inspection.
~Synod Date d X/19~Pf'actory Mutual System Commissions 958.Nelonse Socrc4 Shia.Prsssesoa.
assd Eisi5onen~l
~
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASLlE Code Section XI Home P.O.Box 529100 iami Fl.33152 September 9, 1988 Sheet 1 of 2 plant TurkeY Point P.O.B 3 8 Florida i Performed by Florida Power d P.O.Box 3088 Florida Cit Fl.33034 Li ht F.33034 Unit PWO 2241, NCR-88-0092
'epolr Organlmthn P.O.Hoha Hoeb-Type Code Symbol Stamp N A Authorization No N A Expiration Date N A Afd~Identification of System Chemical Volume and Control S stem'.()s (*" (b)Applicable Edition of Section XI Utilized for RaPaire or RePIacemante 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components 4A Charging Pump drain lin N/A N/A N/A N/A Year Built N/A Repolrsd, Repiooed, or Replacement Repaired ASME Code romped (Vee or No No 7, Description of PoQ Weld re air of crack in u str a c w d va ve 4-7 8.Tests Conducted:
Hydrostattc Pnsumattc Nomtnai Opsrattntt Pressure Other N/A Pressure Teat Temp.ree'e F NOTE: Supplemental sheets ln form of Ilete, eketchee, or drawings may be used, provided (1)size ie 8 1/2 in.X 11 In., (2)Information ln items 1 through 6 on this report le included on each sheet, and (3)each sheet ie numbered and the number of sheets le recorded at the top of thle form.
FORM Nis-2 (Back)Page 2 of 2 9.Remarks Examinations erformed b FPL Qualit Control ersonnel.Welding~Sceble Mewl~Doto Reports to be athxhes erformed in accordance with FPL Weld Control Manual.Component is Qualit Group B.CERllRCATE OF COMPLIANCE We certify that the statements made In the report ars correct ond this to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of rizab No..N/A ExpiraUon Date n r or Owner's Designee, TrUe~/0-2'-5$,~g CERTIFICATE OF IHSERVICE INSPECTION I.the undersigned, holding o valid commission issued by the NaUonal Board of Boiler and Pressure Vessel Inspectors and the State or Province af Dode n and employed by Mcwrf ht Mutual Insurance Com have inspected the components described In this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of hSME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures descrfbed In this Owners Report.Futhermore.
neither the Inspector nor his employer sham be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this InspecUon.
b&pecsoc'e Sssaohco'l9~Factory Mutual System Commissions 95S No5ond boa@I, ShSe, prevlnoe, ene fn4~ts Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI w Li Se tember 27 1988.0.Box 529100 iami Fl.33152 k$droee 2 Pl t Turkey Point Home P.o.B x 0 8 lorid Ci Fl.33034 A$4rwe 3 Work Performed by Florida Power a Li ht P.O.Box 3088 Florida Cit F.33034 Main Steam S stem Sheet t or Unit 4 PWO 2072 Repold argonhetke P.O.HoJob Ho eeo.Type Code Symbol Stamp Authorization No N A Expiration Date N/A dendo N/A Code Case (b)Applicable EdiUon of Section XI Utilized for Repairs or RePlocements 1980, Edition, Winter 1981 Addenda 6.identification of Components Repaired or Replaced and Replacement Components Manufacturer Sodfai Ha.Repaired, Roptactod, or Replacement Steam Trap Drain Valve N/A N/A N/A N/A N/A Repaired N/A 7.Description of Work v b a d i valve ST-4-1412.
8.Taste Conduotad:
'ydroetatto Pnsumotto Nomfnat Oparottntt Pressure Other N/A pressure pei Test Temp.ree'e F NOTE: Supplemental sheet!in form of lists, eketchee, or drawings may be used, provided (1)size is 8 1/2 in.r X 11 ines (2)information in item!1 through 8 on this report le included on each sheet, and (3)each sheet is numbered and the number of sheets le recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9.Remarks Examinations erformed b PPL ualit Control personnel.
Welding Appecabh Manuf~Oats Reports ts be e5octwd erformed in accordance with PPL Weld Control Manual.Component is Quality Group B.CERTIFICATE OF COMPUANCE Ne certify that the statements made ln the report are correct and this conforms to the rules of the ASME Code,Section XI.repa r or rep acomen Type Code Symbol Stamp N/A Cettificate of huthoriza n.N/A ExpiraUon Date ne ignee, TiUo 19 CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ri ht Mutual Insure Com have inspected the components described in this Owner's Report during the period and employed by to and state that to the beet of my knowledge and boIIof, the Owner has performed examinations and taken corrective measures described In this OwneCs Report in accordance with the requirements of ASME Code, SecUon XI.By signing this certificate neither tho Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shaN be Nable in any manner for any personal Injury or property damage or a loss of any Idnd arising from or connected with this inspection.
Factofy Mutual System Commissions 9 No5ond Ioard.Sbsts, preVbtce end Endonensnts
.hopeator'e SSrsitse 19 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLA(:EMENTS As Required by the Provisions of the ASME Coda Section XI P.O.Box 529100 iami Fl.33152 Sheet 1 of 2 plant TurkeY Point Unit P.O.B 3 8 lorid Ci Fl.33034 PWO 2689, NCR-88-0033 l4palr atganhatke p.a.No Job Hodtg.3 pork Performed by Florida Power&Light Type Code Symbol Stamp N A Authorization No N A P.O.Box 3088 Florida Cit F.33034 N/A.Aid~hemical and Volume Control System'(u'*"" denda N/A (b)Applicable EdiUon of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Natbnol , Board No.Yaor Built Ropciired, Roplooed, or Replocement 4A Charging Pump discharge rain ine N/A N/A N/A N/A N/A Repaired No 7 Description of iNork Weld re air of crack in sockolet weld directly upstream of drain tt Teste Conducted:
Htdroetattc pnaumattc Nomlnat Operattntt pressure cttt(er N/A Pressure NOTE: Supplemental sheets ln form of Ilete, eketchee, or drawings may be used, provided (1)size is 8 1/2 in.t X 11 ines (2)information in items 1 through 8 on thfe report le included on each sheet, and (3)each sheet is numbered and the number of sheets Is recorded at the top of this form.
FORM NIB-2 (Back)Page 2 of 2 9.Remarks Bxaminat'ns erformed by FPL Site Quality Control personnel.
JppsaabIe Uanuf~Oota l4pocts fo be athxhe4 Welding performed in accordance with FPL Weld Control Manual.Quality Group B CERTIRCATE OF COMPLIANCE We certify that the statements made ln the report are correct and thfs conforms to the rules of the ASME Code,Section XI.repa I'r rep acemen Type Code Symbol Stamp N/A Expiration Date or Owner's Designee, Title 19 CERTIRCATE OF INSERVlCE INSPECTION I.the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Provfnce of Dade Coun and employed by Arfnvrf ht Mutual fnsura Com have inspected the components descrfbed ln thfs Owner's Report durfng the perfod to and state that to the beet of my knowledge and belief, the Owner has performed examlnatJons and taken corrective measures described In this OwneCs Report in accordance with the roqufrements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his empfoyer makes any warranty, expressed or impfied, concerning the examinations and corrective measures descrfbed in this Owners Report.Futhermore, neither the Inspector nor his employer shaN be ffable in any manner for any personal fnJufy or property damage or a foes of any kfnd arfslng from or connected with thfs inspection.
hepeebx'e SISeaIMIe 19 Factory Mutual System Commissions 4958 H05eal lewd,~prevhae, and En~eafe FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xf t 1.Owner a w Li P.O.Box 529100 iami Fl.33152 Sheet 1 of plant Turkey Point Haffte P.O.8 x 3 88 Florid i Fl.33034 Unit PWO 2631 Repair Oft()eftlmtkNt p.a.Ndtm Nfgge.~ark Performed by Florida Power 6 Li ht f P.O.Box 3088 Florida Cit F.33034 A$d~Uf at f$t Reactor Coolant System Type Code Symbol Stamp Authorization No N A Expiration Date N/A'()u'*" denda N/A Code Case (b)Applicable EdiUon of SecUon XI UUlized for Repairs or Repiacoments 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacomont Components"A" RTD Repel(ed, Ropk)oed, or Replocement ASLIE Code Siam ped gee or Ho 7 QoscrlpUon of)Nortc Replaced studs and nuts on"A" RTD Orifice Flan e 8.Tests Canduated:
Hfdrastaga x Pneumatlo Nominal Operating Pressure Other Pressure ree's F NOTE: gupplemental sheets in form af Ilats, shetohes, or drawings (ruff be used, provided (1)~Ise Is 8 I/2 in.X 11 in., (2)informagon in Items I through 8 on this report ls lnaluded on sash sheet, and (3)sash sheet is numbered and tho number of sheets ls recorded at the top of this form.1 FORM NIS-2 (Bock)Page 2 of 2 9.Remarks Examinations erformed b FPL Construction and Site Quality Control PppSoo¹lo Monuf~Data Rope@la lo¹o ot¹xnoo ersonnel.Com onent is ualit Grou A.CERTIFICATE OF COMPLIANCE We certify that the statements mode ln the report are correct and this conforms to the rules of the ASME Code,Section XI.repa r or rep acemen Type Code Symbol Stamp N/A"/A Expiration Date or Owner's Designee, Title CERllFICATE OF INSERVICE INSPECTlON I.the undersigned, holding a vaNd commission issued by the National Board of BoNer and Pressure Vessel Inspectors and the State or Province of and employed by Arkwrl ht M I lnsura Com of Norwood MA.have inspected the components described ln this Owner'!Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shaN be liable in any manner for any personal inJury or property damage or a loss of any Idnd arising from or connected with this inspection.
~Synahn me 4W>9PH Factory Mutual System Commissions 9 6 Natonal l¹xoS, SbAs, prevlnoe, and Ee5oreanetlo
~~~Q%a em%~%$a a%a~a s a~~~~~~~~~I~I~~r~-~~I I~~~~~I~I V~~~~o o I.o o.agN~I 3la 8I~C~,~~~~~~~~~~~:~;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I~~~.~~~~~~~R~R L~R r a~R~~~~~~0 I~I~~~~o~~~~~o~~Q.~~~.~~~~-~~5~'lit~.~r e~~~~~~~~~~~~~~~~~~~~~~~~~~~~o~~~~~~~~~~~~~
FORM NIB-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
Pyplioable Monufocturw'e cato Reverie to be otbxhed Veldin performed in accordance with FPST.IIreld n procedures.
Quality Group C.CERTIRCATE OF COMPLIANCE Wa certify that the statements made ln the report are correct and this Re lacement conforms to the rules of the ASME Code,Section XI.repa r or rep acomon Type Code Symbol Stamp N/A Certificate of Authorization No.Signed P~z sy~Expiration Date Ed-/~,19 r or Ow s Designee, Title CERTIRCATE OF INSERVlCE INSPECTION I, the undorsignad, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspactars and the State or Province of Dade Coun Rorida and employed by Arkwrl ht Mutual Insure Com of Norwood MA.have Inspected tha components described ln this Owner's Report during the period vH'nd state that to the beet of my knowledge and belief, tha Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Sects Xi.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described ln this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal Injuiy or property damage or a loss of any kind arising from or connected with this Inspection.
Facbxy Mutual System Commission!
4~Sgnotwe Nasonoi eoagl, Sh4e, Provbce.ans End~to Date~l 10~X Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&: LIGHT Name P.O.BOX 529100, MIAMI, FL 33152 Date 10 21/88 Sheet 1 of 1 Alarett TURKEY POINT 2.Plant Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Unit 4 8-aarett Repair Organization P.o.No..Job No.etc.Work Performed by FLORIDA POWER&: LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Aaarett Type Code Symbol Stamp Authorization No.Expiration Date N A N/A>>'.Identification of System Com onent C001in Water 5.(a)Applicable Construe tion Code 831.1 19 55 Edition, N/A Addenda, (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, 5.Identification of Components Repaired or Replaced and Replacement Components N/A Code Case Winter 1981 Addenda Name of Component CCW Return from"C" RCP 1 00 e1'ame of Manu fac turer N/A Manufacturer Serial No, N/A National Board No.N/A Other Identification N/A Year Built N/A ASM'epaired, Code ReplaCed, Stoinped or Replacement (Yes or Repaired No 7.Description of work Weld re air of cracked we1d between FIC-4-635 and f1ange.8.Tests Conduc ted: Hydrostatic Pneumatic Nominal Operating Pressure X Other Pressure 98 psi Test Temp.70 Degree's F NOTE: Supplementol sheets in form of lists.sketches, or drawings may be used, provided (1)size is 8 1/2 in.t X 11in., (2}information in items I through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
~FGRM NIS-2 (BCICk)Paae 2 of 2 9.Remarks~1 1'ual i t Gr ou C.>opxcaole Monurac!urevs Oota Reports to oe attacnea CEIKFICATE OF COh%%3ANCE"le certify thot the statements made in the reoort are correct and this to the rules of the ASME Code, Section Xl.repair repo>>or reptacement conforms Type Code Symbol Stamo N/A v,W Certificate of Authorization o.Sianed Owner or awnevs Designee.Title Date~F'~CERTHCATE OF NSERVICE WSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count Florida and employed by of Arkwriaht Mutual Insurance Compan Norwood, MA.have inspected the components described in this Owner's Report during the period to/++, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordonce with the requirements of ASM'ode.Section XI.By signing this cerificate neither the inspector nor his employer makes any warrany, expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore.
neither the inspector nor his employer shall be liable in any manner for any personal injury or prooerty damage or a loss of any kind arising from or connected with the inspection, insp s Signature Commissions Factory Mutual"=ys:em'956 (N)(I)rtationot soaro, State.province.ana Enaorsements I Oct Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS, As Required by the Provisions of the ASME Coda Section Xl 1 0 FLORIDA POWER a LIGHT P.O.BOX 529100 MIAMI FL 33152 Jddroeo P(ant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Date December.8, 1988 Sheet of 1 1 Unit II4 CNO:Dl-2768 PCM:88-211 P.S.88-165.
Repair Orponhathn p.a.No Job No..eto.N A 3.Work Performed by U Type Code'Symbol Stamp Authorization No OX 3218 FLORIDA CIIY FL 33034 Eplratlon Dat 4.Identification of System CHEMICAL AND VOLUME CONTROL SYSTEM./, A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer
~Sorkil Na.National Board No.Other klettficatfon Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yea or No Pipe Support N/A N/A N/A 4-CCH-51 N/A Replacement No Pipe Support N/A N/A N/A 4-CCH-52 N/A Replacement No Pipe Support N/A N/A N/A 4-CCH-67 N/A Replacement No 7, Description of Work Modified existin i e su rts 4-CCH-51, 4-CCH-52 and 4-CCH-67.8.Tests Conducted; Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)Information in items 1 through 6 on this report.is included on each sheet, and (3)each sheet is numbered and tha number of sheets is recorded at the top of this form.
FORM Nls-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
hppdoobie Manufacturer'e Data Reporte to be attached Neldin erformed in accordance with FPaL I'reweld Control Manual and Site Procedures.
Quality Group C.CERTIRCATE OF COMPUANCE y(e certify that the statements made in the report are correct and this conforms to the rules of the ASME Code,Section XI.repa r or rep acemen g'0~<Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Expiration Date kd7 5rrF/4x N A/+~/2-)9~J Ow er or 0 r's Designee.Title CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel\Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual insurance Com n of Norwood MA.have inspected the components described in this Owner'.s Report during the period X9 PP to/S~and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal inJury or property damage or a toss of any Idnd arising from or connected with this Inspection.
Factory Mutual System Commissions 4958 Hatknol Board, State, Prevboe, ond Endoieemente Date A 0 19 cd Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 ner FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Date r 12 Sheet of 1 1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Unit CNO:Dl-2768 PCM:88-209 P.S.88-163.
Rdtpair Oryanhatfon p.a.HaJob Naeta.3.Work Performed by Type Code Symbol Stamp Authorization No P O.BO 3218 FLORIDA C FL 33034 Expiration Date Identification of System CHEMICAL AND VOLUME CONTROL SYSTEM.N A')e"*""-'" (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, WInter 1981 Addenda 6, Identification of Components Repaired or Replaced and Replacement Components Name of Component Nome of Manufacturer Manufacturer
'erial No.Hcthnal Board No.Year Built Repaired.Replaced, or Replacement ASME Code Stamped (Yea or No Pipe Support N/A N/A N/A SR-613 N/A Replacement No 7.Description of Work su rt SR-613.8.Tests Conduoted:
Hydrostatla Pnsumatto Nominal Operating Pressure Other Pressure psi Test Temp.ree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)Information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIB-2 (Back)Page 2 of 2 9 Remarks ExaminaUons performed by FPL Construction Quality Control personnel.
Itppsoobis Montrrocbtrsr's Data Reports to bs othxhsd dance with PP&L Weld Control Manual and Site Procedures.
lit Grou B.CERTIRCATE OF COMPUANCE We cerUfy that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authoritation No.N A ExpiraUon Date N A Signed pM3 Jtre/Fl~Ow or Owner's Designee, Title me/~~~.f9~I CERTIFlCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period.8/to 8/and state that to the beet of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in thIs OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage ar a lose of any kind arising from or connected with this InspecUon.
Factory Mutual System Commissions 4956 Hosonol Boors, Sots, roovlnos, ond Endcnsrnsnts Date/4 4 0 19 Pd Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPIACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 plant TURKEY POINT P.O.BOX 3088 FLORIDA CflY FL 33034 Date December.27 1988 Sheet 1 of 1 Unit¹4 Repair orgonhaUon p.o.Ho Job No etc.3.Work Performed by I Type Code Symbol Stamp Authorization No.O.BOX 3218 FLORIDA CITY 33034 Expiration Date N A 4.Identification of System~CAL AND+O~CON~ROL'i A>>'*(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, EdiUon, Winter 1981 Addenda 6, Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of M anufactuier Manufacturer Serial No.Other Idettiflcatfon Repaired, Replaced, or Replacement ASME Code Stamped (Yee or No Pipe Support N/A N/A N/A 4-ACH-137 N/A Replacement No 7.Description of Work 8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure psl Test Temp.ree's F NOTE: Supplemental sheets in farm of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)Information in items 1 through 8 on this report ls included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Pppiicobie Manrrfocbrrer's Dcto Reports to be attoctwd Wa r'ed fpr mOdif iCatiOn rrIOrk fOrmed.QUALITY GROUP"C".CERTIRCATE OF COMPLIANCE Ne certify that the statements made in the report are correct and this~>ac to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.s.;-n<~Owner r wner's Designee, Title Expiration Date CERTlFlCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Fiorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period to , 78 xF88 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described ln this OwneCs Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
s'SQMbJfO Date l j O 19~1 Factory Mutual System Commissions 4958 HatbnrN Board, Qaire, Prevhae, and Endcrseinents Page 1 of 3 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl Owner FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CflY FL 33034 1-9-89 Sheet of 2 2 U it EZ: P.S.-5 P.S.88-259 Repair OpgonIxothn P.O.NoJob No oto.3, Work Performed by Type Code Symbol Stamp Authorization No.O.BOX 3218 FLORI A CITY FL 3303 Expiration Date k A 4.Identification of System nent Cool'ater'b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, WInter 1981 Addenda 6, Identification of Components Repaired ar Replaced and Replacement Components Manufacturer Serial No.Year Built Ropoitec4 or Replocemant N/A N/A N/A 1988 Replacement No Support Support N/A N/A N/A N/A N/A SR-681 N/A See remarks 1988 1988 Replacement Replacement No Valve Valve Check Valve N/A N/A N/A N/A N/A N/A N/A See remarks N/A See remarks N/A See~ks 1988 1988 1988 Replacement Replacement Replacement No No 7.Descriptio of Work Added piping, valves and support to existing CCW piping.Modified existing support.8.Tests Oonduotad:
Hfdrostotfe X PnaumoUo Nominal Oparatfntf Pressure Other Pressure 187.5 psi Test Temp.ree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 in.X 11 ln(2)information In items 1 through 8 on this report fs included on each sheet, and (3)each sheet ls numbered and the number of sheets ls recorded at the top of this form.
FORM NIB-2 (Back)Page 2 of 3 9 Rema~Examinations performed by FPL Construction Ouallty Control personnel.
hppltcobte MonufochreCe Data Repute to be attached Welding performed in accordance with the FP&L Weld Control Manual and site procedures.
Quality Group C This support is integrally attached (welded)to existing 16n pipe (cont'd on pg 3)CERllFICATE OF COMPLIANCE We certify that tha stotaments made ln the report are comet and this to the rules of the ASME Code,Section XI.Re lacement conforms ropa r or rep acamon Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date N A Signed/~/.Own Owner's Designee, Title CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dodo Coun Rorlda and employed by Arkwrf ht Mutual Insurance Com of Norwood MA.have inspected the components described ln this OwnoCs Report during the period'~i ZO to W~V.P 5'FW and state that to the beet of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the lnspoctor nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futharmore, neither the Inspector nor his employer shall be liable in any manner for any personal Injuty or property'amage or a loss of any kind arising from or connected with this Inspection.
InepectoA Date J 1 19~V Factoty Mutual System Commissions h95S Hasonol~State, ptwboe, ond Endonenente Page 3 of 3 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.Owner FLORIDA POWER 8c UGHT P.O.BOX 529100, MIAMI.FL 33152 1-9-89 Date 2 2 Sheet of 2.Plant TURKEY POINT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CNO: Dl-2984 P.S.88-258 Repair orgonlzathn p.a.No..Job No etc.3.Work Performed by BECHTEL CONSTRUCTION INC.P.O.BOX 3218 FLORIDA CiiY FL 33034 Type Code Symbol Stamp Authorization No Expiration Date N A 4.Identification of System nent Coolin Water (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Hamo of Manufacturer Manufacturer Serial Ho.National Board Ho.Other IdentificaUon Year Built Repaired, Replaced, or Replacement ASME Code Stamped (too or Ho)Remarks (cont'd fran.2)and is not uni ly identified.
The valves are 1t Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O FLORIDA POWER dc UGHT P.O.BOX 529100, MIAMI FL 33152 01-19-89 Date Sheet of 1 1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CWO: D1-2983;PCN: 88-442;P.S.88-436;NCR-C-0587-88 Raped Orpanhcftion p.a.No..Job No., fftc.0 Tl C.Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA CIIY FL 33034 Expiration Date N A 4.Identification of System Con nent Coolin I'later (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other Identification Year Built Repaired, Replaced, or Replocement ASME Code Stamped (Yes or No Piping N/A N/A N/A CCN 1988 Replacement No Globe Valve Dresser N/A N/A Tag No.1173 1988 Replacement No Gate Valve Henry Vogt N/A N/A Tag No.3-1184 1988 Replacement No Check Valve Rockwell Edward N/A N/A Tag No.1183 1988 Replacement No Support N/A N/A N/A (1)See Remarks 1988 Replacement No Support N/A N/A N/A SR-143 1988 Replacement No 7 Description of'Work Added i in, valves Sf su orts to existin CCtf oioin Nodified existing support.8.Tests Conducted:
Hydrostatic X Pneumatic Nominal Operating Pressure Other Pressure Systems Leakage Test performed to verify integrity of Nechanical Joints Test Pressure based on 52" Static Hd.Press in Surge Tk.NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size Is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report ls included on each sheet, and (3)each sheet fs numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Remarjis Examinations performed by FPL Construction Quality Control personnel.
PypQcobie Manufacturer's Data Reports to be attached Welding performed to FPGL Weldin Control Manual and Site Procedures.
ualit Group"C" (1)integrally attached (welded)support to existing 16" piping.DWG.No.PTN-M-88-442-003-F CERTIFICATE OF COMPLIANCE We certify th'at the statements made in the report are correct and this Re lacement conforms to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed'I+i~&~Owner r Owner's Designee, Title Date CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun FIorida and employed by Arkwri ht Mutual insurance Com n of Norwood MA.have ins ected the components described in this Owner's Report during the period 8 to and state that to the best of my knowledge and belief, the Owner has performed examinotions and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
hspector'e Sig Date P 19 Factory Mutual System Commissions 4956 N I Nathnol Board.State, Province, ond Endarsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPIACEMENTS As Required by the Provisions of the ASME Code Section XI 0 FLORIDA POWER 8c LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Date Sheet of Unit CWO: D1-30 9 PCM: N/A P.S.88-489 NCRC-0594-88 Rmlr Oreanlmuon P.O.Ncab Nc., etc.Type Code Symbol Stamp Authorization No ExpiraUon Date Sream Generator Feechmter System 4.Identification of System 3.Work Performed by P.O.BOX 3 18 FLO A C FL 3303 N A/, A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, EdlUon, Winter 1981 Addenda 6.IdenUficaUon of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No Snubber Pacific Scientific 21381 N/A 4-1022 1981 Replacement No 7.Description of Work RePlaced rear bracket.8.Tests Conducted:
Hydrostatic Pneumatic Nominal OperaUng Pressure Other N/A Pressure psi Test Temp.gree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in,~~X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form, FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Pypscobre Manurocturer'e Data Reporte to be attocheo Welding performed in accordance with the FP&L Weld Control Yanual and site procedures.
Quality Group B CERllRCATE OF COMPUANCE We certify that the statements made in the report are correct and this conforms Hepla cement to the rules of the ASME Cade,Section XI.fepa r'l rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A a Signed.7./Sl Siva Owner or Owner's Designee, Title CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
~~Factory Mutual System Commissions 4956 N'llNpOCtOf'e Nasonal Boon4 State.Prevboo, ond Endoreernente i9$Date Arkwli ht Mutual insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period 8C S cd to PE and state that to the best of my knowledge and belief, Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER 8c UGHT P.O.BOX 529100, MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 3.Work Performed by C U Tl N N P.O.BOX 3218 FLORIDA CflY FL 33034 hddrees 4.Identification of System February 3, 1989 Sheet of 1 1 Un<I4 CWD:D1-3087 PCM.Ropolr Orponlzotlon P.O.IIoJob Ho..otc.Type Code Symbol Stamp Authorization No Expiration Date N A/.../(b)Applicable Edition of Section XI Utilized for Repairs or Replocements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Yacr Bui1t Repaired.Replaced, or Replacement ASME Code Stamped (Yee or No 3" Pi N/A N/A N/A N/A 1989 lacement No 7.Description of Work Oil Cooler.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other*Pressure 165 N/A"A System Leakage Test was performed to verify the integrity of the mechanical joints.NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 in, X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NlS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Ppplkoble Maaufocturw'e Data Repute to be attached All weldin was rformed in accordance with the FP&L Weldin Control Manual and Site Procedures.
Quality Group"C".CERllFICATE OF COMPLIANCE Y/e certify that the statements made in the report are correct and this conforms Replacement to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No, Expiration Date S~rc W6.s wner or ner's Designee, Title CERllFICATE OF INSERVICE INSPEC110N I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Corn n Dade Coun Florida of and employed by have inspected the components described in this Owner's Report.during the period 8C$0/F88 t.J~,~x and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a foes of any kind arising from or connected with this inspection.
Date 2 Iaop4c4Ã~Sisaobgo is~a<Factory Mutual System Commissions 4956 N I~~State~one aa~te
~~~~~~~..~~~~~~~~~I~a~~os~~~Q~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'~'0~~~~~~~~~~~~~~~~~~~~~~~~t~~~~~0~~~0~~~0~~~0~~OO~~~0~~0~~~~~~~<<.0~~~~~-~~~~e.---s e~~~~0'Es Ql~a~~'~~~~0\~~0~~~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~e'~~~~~~~
Page 2 of 7 FORM NIS-2 (Back)9 Romariut Examinations performed by FPL ConsttucUon Quality Control personneL hppkebte Manuf~Octa Repose to be attache All welding was performed in accordance with the FPSL Welding Control Manual and Site Procedures.
Quality Group C.**P.S.88-070/
P.S.88-073/
P.S.88-074/
P.S.88-075.
CERTIFICATE OF COMPLIANCE Wo certify that tho statements made in tha report are correct and this conforms to tho rules of tho ASME Code, SecUon XI.ropa r or rep acamon Type Code Symbol Stamp N/A Certificate of AuthorizaUon No.N A Expiration Date N A Siig nod Owns Owner's Designee, Title/4)Q CERTIRCATE OF INSERVlCE INSPECTION I, tho undersigned, holding o valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorido and omp'eyed by have.Ins to Mcwri ht Mutual insurance Com n of Norwood MA.ted the components describe in this Owner's Report during the period W P'nd state that to the best of my knowledge ond belief, the Owner has performed examinations and taken corrocUve maasuros describe in this Owner's Report in accordance with tha requirements of ASME Code,Section XI.By signing this certificate noither the Inspector nor his employer makes any warranty, expressed or I implied, concerning the exaininations and corrective measures described in this Owners Report.Futhormore, neither the Inspector nor his employer shall bo liable in any manner For any personal Injury ar proporty.damage or a loss of any kind arising from or connected with this inspocUon.
Commissions Factoty Mutual System 9 N Date cP 19,
~~0 e PI%~Q~0 0 0 0~Q%0~~~~~.~~~~'~I~~P~0~~I~~~~~~~~a~~V P~P II~~~~~P~~~~~~~~~~~~l~~~~~'~~~~~~~I~III~~~~P~~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~P~~~1~~~~~~~0~~~~~~~0~~~~$~a~'ll~l 4 P~P~W~$~~~~~Pt~-'"n~-Ol-l~~~L~~~~~~~OE~~~
~~1~~0~~~~1 0 0 P~~I~I~I~~~~~~~~~~~~~~~~~~~~~~~~~'~r~~~~~~~P~~~~~~~~~~~~~~~~~~~~~~~~~~~~r~r~~~P~r~~~~~~~Im~l~~~g~~~1~~~~~1~~~~~~~~r r r r P~r~~~~~'~~~
~~~'ega~o y~~~e~0 0 0~~~~~~~~~I~~~~~~~~~~~~~~~~~~~e~~~~~~~~~~~~~~~I~~'~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~l~~~~~s~~~~~~~~~~~~~I i I~~'~II~~~~~
~~~e a O~~~~~~~~~.t~~~~~~~~~~~~~~~~~~~~~1 O~~~~~~l~~~~~O Q~~'0~~~~~~~~~~~~~~~~~~~4~~~~~~~~~~~~~~~~~~~~o~~~~~0~0~~~~O~I'-~O~~~O~~~O~~O~~~OO~~QI~~~~~a~~~~~~~I~~~~~~~~~ll~~~~OO~'~~~
Q&QQ~P~0~P~~~~~I't'~~~~~~~~~P~~~~~PV~~~~~~~~P~~~~~~~~~~~~~0~'P~~~~~~~~~~'~~~~'~~~~'~~P~~~~~~~~~~~~~~~~~0~~~~~~I~~0~~~0~~OO 3~IP 1%))l P~~~P P~P~~'~~~
IO Page 1 of 2 FORM HIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by tha Provisions of the ASME Code Section Xl 0 r FLORIDA POWER 8c LIGHT P.O.BOX 529100 MIAMI FL 33152 Date Feb ruar 6 1989 Sheet t of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit"4 CWO Dl 3135 P P~S~89 085 d NCR N 89 0105 R~~hatbn P.O.No.m No~3.Work Performed by I Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLO IDA CITY FL 33034 Expiration Data N Idantif(cation of System ComPonent Coo 1 in Water'.(eel*"'"-'-"".'r-~/(b)Applicobla Edioon of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Manufoctu(sr Sar@I No.Year Built Repaired.Repioca4, or Repk(ca(nant 18" Piping N/A N/A N/A N/A N/A Re aired No 7 Descnptlon of Woe Perfo~ed'a base metal re air b Pipe Support 4-ACH-13.8.Tests Oonduoted:
Hydrostada Pnsumatfa Nominal Opsradntf Pressure Other N/A Pressure psl Test Temp.gree's F.NOTE: Supplemental sheets in form of Ilats, sketches, or drawings may ba used, provided (1)size is 8 1/2 ln.X 11 in., (2)information ln items 1 through 8 on this report ls included on each shoot, and (3)each sheet is numbered and the number of sheets Is recorded at the top of this form.
FORM NIS-2 (Back)'age 2 of 2 9 Remari Examinations performed by FPL Construction Quality Control personnel.
hppdcoStc Lranvroctww'c Octa Roportc to bo athehe4 All welding was performed in accordance with the FPGL Welding Control Manual and Site Procedures.
Quality Group"C".CERTIRCATE OF COMPLIANCE We certify that the statements made ln the report are correct and this conforms to the rules of the ASME Code,Section XI.repa r or repacemen Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Oats Signed!5r ra er or Owner's Designee, Title , 19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by I Arkwri ht Mutual Insurance Com n af Norwood MA.~1 to-cd Z///7 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xi.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.
Date@~c 19~&Factory Mutual~em Commissions 495S%donar scare State.Prese, and Er~nents
~~0 s~0~a 0 Qs 0~0 0 II%~~~, t,~~~~~~~~-~g g I~0~~~~~~~~~I~~~~I~~~~-~-~~=aN~3L~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~so.'l~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-~~~~J~~~I~~st~~13~~l r)l i~~~~~~~~~~~~~.~~~~~~.~~~~~~~~~'J~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~,~
FORM NIS-2 (Bock)Pago 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
Pyp4oable Monufochxw'e Oota l4ports to be ottoohed Quality Group"B".CERTlFlCATE OF COMPLIANCE We certify that tha statements made In the report are correct and thl!to the rules of the ASME Code, Section N.conforms repa r or rap acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Signed N A Expiration Date Si n=Owner OwnoCs Designee, Title N A CERTIFICATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission issued by the Notional Board of-Boiler and Pressure Vassal inspectors and the State or Province of Dade Coun Florida and employed by Mcwri ht Mutual Insurance Com of Norwood MA.have Inspected the components described In this OwneCs Report during the period c.lP5'nd state that to the beet of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the lnspoctor nar his employer makes any warranty, expressed or Implied, concerning the examinations and corrective moasures descrfbad in this Owners Repart.Futharmora, neither tha inspector nor his employer shall be liable In any manner for any personal Injury or property'amage or a loss of any kind arising from or connected with this inspection.
Factoty Mutual System Commissions
" 9 Nolond Boord, Nate.Pre>boo, ond Endoaenwde Date l 19 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisfons of the ASME Code Section XI 1 Own FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 p(ant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by P,O.BOX 3218 FLORIDA CITY 33034 4.Identification of System stan 2-13-89 Sheet 1 of Unit 4 CNO: Dl-3088 N-89-0027 N-89-0030 PCN: N A N-89-0028 Repolr Orgotthaeon pAL HoJob Nooto.Type Code Symbol Stamp Authorization No Expiration Date N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, WInter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Nome of Manufacturer Manufacturer Serhl No.Repaired, Ropiacod, or Replacomont S/Q llAII Main PW S/G"B" Main PW N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 7.Description of Work Rt-'~base IABtal lineaz'AH.cations
~anal with li t 1I111D~8.Tests Conducted:
Hydrostatic Pneumatta Nomtnat Opercttng pressure Other N/A Pressure ps1 Test Temp.ree's F NOTF'upplemental sheets in form of lists, sketches, or drawings may be used, pravided (1)size is 8 1/2 Ine X 11 in., (2)Information in Items 1 through 6 on this report Is Included on each sheet, and (3)each sheet Is numbered and the number of sheets Is recorded at the top of thb form.
FORM NIS-2 (Back)Page 2 of 2~i 9 Remari Examinations performed by FPL Construction Quality Control personnel,~MorwfoctareCa Data Reports to be attached Quality Group'B'he indications were evaluated to be not sexvice related.CERTIRCATE OF COMPLIANCE We certify that the statements made in the report are correct and this conforms to the rules of the ASME Code, SectIon XI.repa r or rep acemen Typo Code Symbol Stamp N/A Certificate of Authorizatio No.Expiration Date N A Signed x~l&c5<~cate Own OwneCs Designee, Title CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual insurance Com n the wner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 N I Noeanol Board, State.Pmvbo>>, ond Endoreerrrenta.a Senators Date+~+$9~/have inspected the components described In this OwneVs Report during the period lo to and state that to the best of my knowledge and belief, Pape 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 2-13-89 Shoat t of Unit 4 CNO: D-N N-89-0062 l4polr Orponhetfon pA).Ho A4 Ho etc.3.Work Performed by Type Code Symbol Stamp Authorization No P 0 BOX 3218 ORIDA C 330 Expiration Chemical Volume Control stem 4.Identification of System'iiul*""--"-'"*(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Companents Repaired or Replaced and Replacement Components Monufocturer Serlol No.Repoired.Ropbceg or Replocerrtent Piping N/A N/A N/A N/A No 7 D--b-f W 4 R~~2 a b~~ta.l~~~~t on by r~~g~th light 8.Tanto Conduotad:
Htrdrostatto pnsumaUo Q Nominal Oparattnd Prassura Othar N/A Pressure NOTE: Supplemental sheets ln form of fists, sketches, or drawings may be used, provided (1)size ls 8 1/2 In.X 11 inaa (2)information in items 1 through 6 on this report ls included on each sheet, and (3)each sheet Is numbered and the number of sheets ls recorded at the top of this form.
FORM Nle-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
hppSoobte Monufocturw'e Octo Reports to be ottocbe4 lit Gro'A'he indication was evaluated to be a manufacturing inperfection.
CERllRCATE OF COMPLIANCE We certify that the stotamants made In the report are correct and this to the rules of the ASME Code,Section XI.repar or re conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A N A Signed Owner Owner's Designee, Tr'Ue CERTIRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boiler ond Pressure Vessel Inspectors and the State or Province of Arkw't Mutual insure Com Oode Coun Rorlda of and employed by Norwood MA have inspected the components described In this Owner's Report during the period~ld 1 fO'V to~/'8 and state that to the best of my knowledge and belief, tha Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employor makos any warranty, expressed or implied, concerning tho examinations and corrective measures described In this Owners Report.Futharmore, E neither tho Inspector nor his employer shall be liable in any manner for any personal Injtly or property damage or a loss of any kind arising from or connected with this Inspection.
bepecbx'ate 2 8 19 Factory Mutual System Commissions 4958 N Na5onol Boae, State, Prahxe, oo4 Endecwwnente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 e Sheet of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CCIY FL 33034 Unit CNO: Dl-3088 PCÃ: NA N-89-0033 Repair OpgafthotIon P.O.No., Job No., eta.3, Work Performed by U 0 P.O.BOX 3218 FLORIDA CITY FL 33034 Type Code Symbol Stamp Authorization No Expiration Date Steam Generator Blawdawn stem hddrooe 4.Identification of System S'78 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component"B" S/G Blaw-dawn Line Home of Manufacturer Manufacturer Serial No.N/A N/A Year Built N/A 1982 RepafrocL Roplocad, or Replacement ASLIE Code Stomped (Yes or No Yes 7.Description of Work Repaired a base metal linear indicatian by retnoval with light gr3Jlding.
B.Tests Oonduoterh Htldrostotlo Pneumotte Nomlnot Operotlng Pressure Other N/A Pressure t psi Test Temp.gree's F NOTE: Supplemental sheets in form of fists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 ln., (2)Information ln items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)9 Remarks Examinations performed by FPL Construction Quality Control personnel.
App!lcoble MorwfoctunCs Doto Reports to be attached Quali Grou rB'he indication was evaluated to be not servic related.CERTlRCATE OF COMPUANCE We cerUfy that the statements made ln the report are correct and this Repair conforms to the rules of the ASME Code,Section XI.repa r or rep acemen Typo Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed M~S i~d'~~e Owner o wner's Designee.TrUe CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorlda and employed by Arkwrl ht Mutual Insurance Com n of Norwood MA.have inspected the components described ln this Owner's Report during the period dec/to~.9F and state that to the best of my knowledge and belief, the Owner has performed examinotions and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described ln this Owners Report.Futhermore, neither the inspector nor his employer shall bo liable ln any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 N I Na5onol Board.State.~and Ehdorsemerrls Date 2 ZP 19~&
Poge 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 0 FLORIDA POWER a LIGHT P.O.BOX 529100 MIAMI FL 33152 e 2 l3 89 Sheet of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Unit CN): Dl-3088 PQ4: NA N-89-0083 RepoIr Orgottlmtke P.O.No., hk No dttc.Type Code Symbol Stamp Authorization No Expiration Date Reactor Coolant stem Afdfeeo 4.Identification of System 3.Work Performed by U C Name P.O.BOX 3218 FLORIDA CITY 33034 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Name of Mcnufocturer Manufocturer Serfol No.Repaired, RopIo cod, or Replocemont Support~IN/A N/A N/A 4-SR-400 N/A 7.Description of Work~ed cracked welds.on suPPort saddle to PiPe.~ormed surface exanunation on i wall in the weld removal areas.~lded saddl 8.Tests Conduoted:
Htrdrostotto
" pneumotto Nomtnot Opsrotlntt Pressure Other~N/A Pressure psl Test Temp.roe's F NOTE: Supplemental sheets in form of fists, sketches, or drawings may be used, provided (1)size Is 8 1/2 In.X 11 in(2)Information ln items 1 through 8 on this report ls Included on each sheet, and (3)each sheet Is numbered and the number of sheets ls recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL ConstrucUon Quality Control personnel.
Ppplbabte Manorachrer'e Data Reparte to be attoche4 Weld rforaed in accordance with the FP&L Weld Contxol Manual and site rocedures.
Qual>.Grou'B'ERllRCATE OF COMPLIANCE We cerUfy that the statements made in the report are correct and this to the rules of the ASME Code, Section Xi.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of AuthorizaUon No.N A Expiration Date Signed~lP W~-Date Owner Owner's Designee, TIUe CERTlRCATE OF INSERVICE INSPECIION I, the undersigned, holding a valid commission issued by the NaUonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Florido and employed by Arkwri ht Mutual Insurance Com of have inspected the components described ln this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 I~ctor'e nablre Nasonaf Boanf, State, Pravtnce, anrf Endoreemente 19~4 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O r FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CRY FL 33034 2-24-89 Date Sheet t of Unit 4 KN: NA P.S.89-029 N-8-ROpoIP OrsontmtkNt PAL NOJob Hoetc.3.Work Performed by Type Coda Symbol Stamp Authorization No P.O.OX 3218 FLORIDA CllY 33034 Expiration Data N A 4.identification of System (b)Applicable Edition of Section Xl Utilized for Repairs or Raplacemonts 1980, Edition, Winter 1981 Addenda 8.Identification of Components Repaired or Replocad and Replacement Components Steam Generator'B'esting-house Manufacturer Seriol Ho.16A6341-2 774 4E210B Repolred, R~or Repiocement 1969 Repair ASME Code Stomped (1'ee or No Yes 7.Description of Work Re base metal linear indication in the main ste nozzle with li ht indin.8.Toute Conduoted:
Hydroetodo PneumoUo Nomlnol OporoUng Preeeuro Other I Pressure psi Test Temp.gree's F N/A NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1)size Is 8 1/2 In.X 11'fn(2)Information in Items 1 through 8 on this report Is Included on each sheet, and (3)each shoat Is'umbered and tho number of sheets is recorded at the top of this form.
FORM NlS-2 (Back)9 Remarks Examinotions performed by FPL ConstrucUon Quality Control personnel.
hpplocCuo uonufochra'o Data Reports to bo athxnod Quality Group'B'he indications were manufacturin rfections and not service induced.CERTIRCA'K OF COMPUANCE We certify that the stotamonts mode in tho roport are correct and this.to the rules of tho ASME Code, SocUon XI.repa r or rap ocaman conforms Type Code Symbol Stamp N/A Certificate of Authorization No.ExpiraUon Date//Zda Jiir: MOM Ow or or Ow s Designee, TrUe Z-ro CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding o voiid commission Issued by the NaUonal Board of Boiir ond Pressure Vessel inspectors and the State or Province of Dade Coun Rorlda and employed by Arkw't Mutual'Insurance Com of Norwood MA.have Inspected the components dcocrlbed In this Owner's Report during the period to t+~i ZZ 74 and state that to the best of my knowledge ond belief, the ner has performed examlnaUons and taken correcUve meosures described in this Owner's Report in accordance with the raquiromonts of ASME Code, Section M.By signing this certificate neither the Inspector nor his employer makes ony warranty, expressed or Implied, concerning the examinations and corrocUve moosures described in this Owners Report.Futhormore, neither the inspector nor his omptoyor shall be liable in any manner for any pareonal InJury or property damage or a lose of any kind arising from or connactod with this InspocUon~()'actory Mutual System r Commissions 49 S H Ha5onol Som4 SCoto, Ptevboo, ond Endoroon~to Date 3~i 19'F/
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASLIE Code Section Xl OFLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 February 17, 1989 Sheet of 1 1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 CWO Dl 2908 I NCRM 0578 88 Repair Organhetbn P.O.Ho., Job Hoetc.I Type Code Symbol Stamp Authorization No 33034 Expiration Date Reactor Ccolant System 3.Work Performed by P.O.BOX 3218 FLORIDA CITY N A 4.Identification of System r (b)Applicobfe Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Homo of Mcnufocturor Mcnufccturer Serhi No.Repcired, Replaced, or Re pktcernent ctor Pres.essel Babcock It'ilcox 610-0116 N-161 PSRV-1 970 olacement Yes 1 7.Description of Work Re laced closure stud 550 that~s damaged~le detensioning for renxnral of the Reactor Pressure Vessel Closure Head.8.Tests Oonduotsd:
Hydrostatlo Pneumatla Nominal Operating Pressure Other Q N/A Pressure psi Test Temp.gree's F NOTE: Supplemental sheets ln form of lists, sketches, or drawings may be used, prcnfided (1)s'Ize ls 8 1/2 ln, X 11 ln., (2)information ln items 1 through 6 on this report ls included on each sheet, and (3)each sheet ls numbered and the number of sheets ls recorded at the top of this form.
FORM Nls-2 (Back)Page 2 of 2 9 Pemarks Examinations performed by FPL/bCI ISI Examiner's,.(Ebasco).Ppplkob'lo ManafochnCo Dato Reports ta bo attached Quality Group"A".CERIIRCATE OF COMPUANCE Ne certify that the statements made in the report are correct and this REPLACEMENT to the rules of the ASME Code, Section Xl.repair or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed/ZCG g/7 i-A6 rC.Date Own OwneCs Designee, Title CERTIRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Boord of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwii ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period 4Ui df 5S~u'.ZP and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective meosures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any personal Injury or property damoge or a loss of any kind arising from or connected with this Inspection.
Factory Mutual System Commissions 4956 N I hopoctot'tgnaturo Hasonol Boord, State.Prwbce, ond Endoieomento Date Z ZcF)9' Page 1 of 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power tg Light Name P.O.Box 529100, Miami, FL 33152 Adotdss Turkey Point Namd P.O.Box 3088, Florida City, FL 33034 pate 3 31 sheii ot,,,/Y NCR-947-86 CWOz Dl-1865 PCM: N A Ao cress 3.Work performed by BeChtel COnStruCti On, ZnC.Ndm~P.O.Box 3218 Florida City, FL 33034 Acturdss Rdodlr organization p.o.No., Job No.,~tc.TYPe Code Symbol Stamp N/A Authorization No.N/A Expiration pete N A 4.Identification of System Containment Zsolati on S stem (Venti lation)ib)Applicable Edition of section xl Utilized for RePairs or Replacements 19 80, Edi ti on, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped~IYes or Nol 1 CZS-4-2 N A N A N A Replace-ment No 7 pescription of work Znstal 1 new j" sti ffner plates on base plate of CZS-4-2 Support I~B.Tests Conducted:
Hydrostatic p Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or draw)ngs mey be used, provided I1)size Is BS in.x 11 In., I2)informa-tion in items 1 through 6 on this report is included on each sheet, and I3)each sheet is numbered and the number of sheets is recorded at the top o".this form.I12/62)This Form IE00030)may be obtained from the Order pept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FPRIyl NIS 2 (Back)9.R.ar s Examinations oerformed hv FPZ, Construe 4bbliaable
'Vianu!acturer's 0ata Renorts to be attached in accordance with NCR-947-86.
Welding performed in accordance with FPI Weld Control manual and site rocedures.
Quali ty Group B.CERTIFICATE OF COMPLIANCE ASME CodeSection XI.repair or reoiacement Type Code Symbol Stamp N/A Certificate of Authorization No.Signed 0 ner o 0 ner's Oe gn, Title N/A Expiration Date Oate N/A~f'CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure vessel Inspectors and the state of hav inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, t e Owner has performed examinations and aken corrective measures described in this Owner's Report in accordance with the reauirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Insoector's
'ature Commissions Factor Mutual 4956 N I National Board, State, Province.and Endorsements Date{12/B2I**Arkvright-Boston Mfg's Mutual Insurance Company Page I of'FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O ner Florida Power 8 Light Name P.O.Box 529100, Miami FL 33152 Date 3-31-87 Sheet 1 of 2.Plant Address Turkey Point Unit Name P.O.Box 3088, Florida City, FL 33034 Address 3.Work performedby BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address NCR-1246-86 WO D1-1 8 N A Repair Organization p.O.No., Job No..etc.Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N A 4.Identification of System Chemi cal and Volume Control S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 i Edition, Wi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Cornoonent Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year 8uilt Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Hanger S-67 Hanger N A N A N A N A N A N/A eplace-ent eplace-ent No No 7.Description of Work lnStallati pn Of i e Clam S fOr Su rtS SR-607 and 4-VCH-42.8.Tests Conducted:
Hydrostatic P Pneumatic P Nominal Operating Pressure Q Other Q Pressure psi Teat Temp.'F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size Is 8)(in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o.'his form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Back)a Remarks Examinations Derformed b FPL Construct'on a>ooticsble Manu!acturer's Data rseoorts to be attached in accordance with NCR-l246-86.
fielding performed in accordance with FPL h'eld Control manual and site procedures.
uali t Grou B.CERTIFICATE OF COMPI.IANCE tconforms to the rules of the ASME Code,Section XI.repair or replacement Tvpe Code Symbol Stamp N/A Certificate of Authorization No N/A Expiration Date N/A Signed/4dJ;S/79~4,<.Dw r or Owner s D ignee, Title.l9~tf CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and ernployedby
- of have inspected the components described in this Owner's Report during the period O to , and state that io the best of my knowledge and belief, the Owner has performed examinatio s and taken corrective measures described in this Owner's Report in accordance with the requirements ot the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lns e tor'9 Signature Commissions Factor Mutual 4956 N National Board, State, Province, and Endorsements Oate 19~<V I12/B2)~" Arjcwright-Boston Mfg's Mutual Insurance Company Page 1, of 2 FORM Nlse2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Da<<4-9-87 sheet S of Unit 4 NCR-079-86
~-1 RarsaIr Organization Type Code Symbol Stamp Authorization No Expiration Date owner F 1 ori da Power fg Li gh t Name P.O.Box 529100, Miami, FL 33152 Address plant Turkey POi nt Name P.O.Box 3088, Florida City, FL 33034 Address 3.Work Performed by BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Flori da Ci t, FL 33034 Ad dress 4.Identification of system Steam Generator Blowdown System N A P 0 No Job No atc N A N/A 5.(a)Applicable Construction Code 19 67 Edition, N (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 , Edition, Punter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired Replaced, or Replacement ASME Code Stamped (Yes or No)Hanger H-420-08 N/A N/A N/A N/A N/A Replace-ment No 7.Description of Work Modi fy support H-420-08 by addi ng 3/4" wing plate.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.fs F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top oe this form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of'FORM NIS-2 (Back j 9.Aemarxs Examinations erformed b FPL Construct'Aooticabla Manufacturer's Oara Reports to be attacnad in accordance with NCR-079-86.
Velding performed in accordance with FPZ Veld Control Manual and site procedures.
guali ty Group B.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Pgd J.Ql'fY~ner r 0 nar's 0 s gnae, Title Date , l9 rr CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of hav inspected the components described r in this Owner's Report during the period t , and state that to the best of my knowledge and belief, th Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lnsoa or's Signature Commissions Factor Mutual 4956 N I National Board, State, Province, and Endorsamants Date (12/82)**Arjcwright-Boston Mfg's Mutual Insurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner F 1 ori da Power 8 Li ght Name P.O.Box 529100, Miami, FL, 33152 2.Plant Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3 Work performed by BeChtel COnStruCti On, ZnC~Name P.O.Box 3218 Florida City, FL, 33034 Address 4, Identification of system~afet In ection System Date Sheet 1 Unit 4 NCR-1085-86 VO: D1-1901 N A Reaelr organization p.o.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A ib)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 i Edition, Vi nter 1981 Addenda B.Identification of Components Repaired or Replaced and Replacement Compo'nents Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASM E j'ode Stamped!IYes or No)eci rcul ati on N/A N!A N/A N/A N/A Repair No Static Head Drilled 3/8"-drain hole in low-point run of ine.Remove we s by 7.Descriptfonof WorkVeld re air Of FV'S 1-8.StainleSS lu inSerted in pipe wall and welded in place with a 3/16" fillet weld.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other PX Fremere**Ftt Tert Temh.~F**280 psi and static NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided I1)size is BN in.x 11 in., (2)informa cion in items 1 through B on this report is included on each sheet, and I3)each sheet ls numbered and the number of sheets is recorded at the top oe this form.I12/B2)This Form IE00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Sack)aoolicaole
'Manufacturer's Gate Reoorts to be attached in accordance with NCR-1085-86.
Weldin performed in accordance vith FPI, Weld Control Manual and site procedures.
Quali ty Group B.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No, Signed w r or wneVs esi N/A N/A PMJ~+gg w nee, Title Expiration Date N/A 19 CERTIFICATE OF INSERVICE INSPECTION I.the undersigned, holding a valid cornrnission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employedby
- of have ins ected the components described in this Owner's Report during the perio to , and state that to the best of my knowledge and belief, the wner has performed examinations an taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.C By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner tor any personal injury or property damage or a loss of any kind arising from or connected with this inspection, tnsoe r's Signature Commissions Factor Mutual 4956 N 1'ational Board, State, Province, and Endorsements Oate'12IB21 x'~Arkvright-Boston Mfg's Mutual Insurance Company Page 1 of 2 FORM NIS 2 OPINER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by, the provisions of the ASME Code Section XI Florida Poiyer 8 Light Name P.O.Box 529100, Miami, FL 33152 Oate 4 20 87 Sheet ot 1 1 Address Turkey Point unst NCR-988-86 CVO: Dl-1872 PCM: N/A'.Plant Name P.O.Box 3088, Florida City, FL 33034 Raoalr Organization P.O.No., Job No..atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oata N A Address 3.Work Performedby BeChtel COnStruCti On, InC.Name P.O.Box 3218 Florida City, FL, 33034 Address 4, Identification of system Nuclear Instrumentation System (Zncore Flux Mapping System)st pppt'eehte seao or scrap xs utltiteato Rape'rso Reoteeemeha ts 88, rdirion, tpinser 1981 Addenda B.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other Ident1ficat1on Year Built Repaired, Replaced, or Replacement I ASME Code Stamped I (Yes Or NOI I I H6 Zncore Detector Condui t Vesti nghous N/A N/A N/A N/A Repair No I 7 o'lon of work Veld repair of defect in H6 Incore Detector Condui t.8.Tests conducted:
Hydrostatic Qx Pneumatic Q Nominal operating Pressure Q Other Q Pressore~j pst Test Temp.A81 F NOTE: Supplemental sheets in form of lists, sketches, or drawings may beused, provided (1)site is 8'h in.x 11 in., i2)informa-tion in items 1 through 6 on this report is included on each sheet, and i3)each sheet is numbered and the number of sheets is recorded at the top o'his form., i12I82)This Form iE00030)may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 iBack)0 Rq~sarxs Exami na t'ns performed by FPL Constr ct aooncaole'vtanu!acturer's Data Reports to be attacrieo in accordance with NCR-988-86.
Velding performed in accordance with FPL Veld Control Manual and site procenures.
uali t Group A.CERTIFICATE OF COMPLIANCE conforms to the rules of the repair or replacement Tyae COde Symbpl Stamp N/A Certificate of thorization No.N/A Expiration Date N/A Signed~/~0 ner Ow 8/PNJ,Xg~r's Oes'e, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel lnspectorS and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period to to the best of my knowledge and belief, e 0 ner has performed examinations a Owner's Report in accordance with the rettuirements of the ASME Code,Section XI., and state that taken corrective measures described in this By signing this certificate neither the Inspector nor his emplOyer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable m any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
ln tor's Signature Commissions Factor Mutual 4956 N 7 National Board, State, Province, and Endorsements Oate f12182)*~Arkwright-Boston Mfg's Mutual l'nsurance Company Page I oF 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the provisions of the ASME Code Section XI 2.Plant Florida Power Ig Li ght Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Flori da City, FL 33034 pate 4 20 87 Sheer~of Unit NCR-967-86 address 3.Work Performed by BeChtel COnStruCti On, InC.Name P.O.Box 3218 Florida City, FL 33034 Type Code Symbol Stamp Authorization No Expiration Date N/A N/A N A Repair organization p.o.No., Job No., etc.Address 4 Identification of system Residual Heat RemovaI System (b)APPlicable Edition of Section XI Utilized for Renairs or Renlacements 19 80 r Edi tiOn r hei nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped'Yes or No)t Mechanical Shock Arresto Pacific-Sczentzfzc 122 N/A 4-101 6 N/A eplace-ment I No I 7.pes<<lpt;onof work Re laced the self drilled expansion anchor to snubber mounted to the Unit 4 RHR Pump"A".8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.aF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is Bys in.x 11 in., (2)informa-tion in items I through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top o'his form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of'FpRM NIS.2 (Back),~, Sxaminari~ons ersormed e rpL Consrrccr'on
~ooncaoie'xtanufacturer's Osta Reports to be attacned in accordance with NCR-967-86.
uali t Grou B.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.~.7.Qifdi 0 ner 0 ner's Oe i nee, Title N/A Expiration Date Si7-]e4a~.N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned.
holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, Owner has performed examinatio s and taken corrective cneasures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner tor sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
I actor's Signature Commissions Factor Mutual 4956 N National Board, State, Province, and Endorsements Date IB~>(12/B21**Arkwright-Boston Mfg's Mutual Insurance Company Page I oF 2 FORM NIS 2 OWNER'S REPORT FOR RFPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power Ig Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3 work performed by Bechtel Constructi on, Znc.Name P.O.Box 3218 Florida City, FL 33034 Address 4-20-87 Sheei I Unit 4 NCR-1030-86 0: DZ-1897 PCM: N A Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System Residual Heat Removal S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edi tion, Hinter 1981 Addenda 6.Identification of Components Repaired or Replaced snd Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board'o.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Mechani cal Pacific-tific 122 N A 4-1016 N/A Replace-ment No 7.Description of Vyork ReplaCed eXiSting tranSitiOn tube aSSembly With a neW PaCifiC-Scientific assembly designed for the existing MSA.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.'F N/A'OTE: Supplemental sheets in form of lists, sketches, or drawings msy be used, provided (1)size is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'.this form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of'FORM NIS-2 (Back).a..,m, Examinations
~erformed by rat constrnctio a AOPIICSble a/ianu'aCturer'S Cata RePOrtS tO ibe attaChed in accordance with NCR-l030-86.
Weldin in accordance with FPI, Weld Control Manual and site rocedures.
uali t Grou B.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Tvpe Code Symbol Stamp N/A Certificate of Authorization No.N/A Cxpiration Date N/A Signed roro P/zs/J/la/.fire/c ner's e gnee, Titie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have inspected the components described in this Owner's Report during the period to , and state that to the best of nty knowledge and belief, t e Owner has performed examinatio and ta en corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer Shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
insp or's Signature Commission~
Factor Mutual 4956 N I National Board, State, Province, and EndortementS Date~C/I BM2 I12/B2i**Arkwright-Boston Mf'g's Mutual Insurance'ompany Page 1 of 2 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power tg Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3.yyork performed by BeChtel COnStructiOn, I'nC.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of System Oste Sheer of 1 Unit 4 NCR-294-86 CWOr D1-1674~N A Reosir Oreenlzstion P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A ib)APPlicable Edition of Section XI Utilized for RePairs or RePlacements 19 80 r Zdi tiOn, Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National 8osrd No.Other Identification Year 8uilt Repaired, Replaced, or Replacement ASME Code Stamped(I Yes or No)Mechani cal Snubber Pacific Sci enti fi c 4251 N A 4-1048 1979 Repl ace-ment No 7 Oescrjptjon of yyork Removed and reins tailed rear bracket to shim plates to provide clearance from electrical conduit.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is Sy in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top oe th(s form.(12/82)This Form (E00030)may be obtained from the Order Oept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Back)B Ran arises Examinations Derformed b FPL Constructi on a applicable Manufacturer's Data Reports to be attacneo in accordance with NCR-294-86.
Weldin erformed in accordance vith FPL, Weld Control Manual and site rocedures.
uali t Grou C.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed ner ro/dos.err~.m<e.er s Designee, Title Date~7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or province of and employed by**of have inspected the components described in this Owner's Report during the period'~to , and state that to the hest of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection tnso or's Signature Commissions Factor Mutual 4956 N I National Board, State, Province, end Endorsements Date ISA (12/B2)"" Ardri ght-Boston Mfg's Mutual Insurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Porver 8 Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida Ci ty, FL 33034 gage 4-29-87 Sheet of 1 1 Unit N R-CWO: D1-1674 PCM: N/A Address 3'Work performed by BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System Address Reactor Coolant System (b)applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced snd Replacement Components Name of Component Name of Manufacturer Msnufscturer Serial No.National Bosrd No.Other identification Year Built Repaired, Replsced, or Replscement ASME Code Stamped (Yes or No)MSA 4-PRH-10 MSA 4>>PRH 10 MSA 4-PRH-5 Pacific-Scientific Pacific-Scientific Pacific-Scientific 11438 3919 2465 N/A N/A N/A 4-1 044 4-1044 4-1055 N/A Replaced No N/A Rep ace-ment No N/A Replaced No MSA 4-PRH 5 Pacific-Scientific 11110 N/A 4-1055 N/A Rep ace-ment No 7.Descriptionof Work Re laced MSA's that failed limited VT-4 operability test.B.Tests Conducted:
Hydroststlc Q Pneumatic Q Nominal 0persting Pressure Q Other Q Pressure psi Test Temp.eF N/A NOTE: Supplemental Sheets in fOrm Of (late, SketChea, Or drSWlnga rney be uSed, prOVlded (1)SISe Ia B)rS In.X 11 inch (2)infOrme-tion in Items 1 through 6 on this report is included on esch sheet, end (3)esch sheet Is numbered snd the number of sheets is recorded st the top o'his form.(1 2/62)This Form (E00030)msy be obtained from the Order Dept., ASME,346 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Back)g Remarks Examinations erformed b FPL Constr c Applicable Manufacturer's Osta Reports lo be attached in accordance with NCR-83l-86.
guality Group C.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No.N/A N/A Expiration Date N/A Signed f~~r~Sr pc: wnsr r 0 ner's 0 ig~, Title go 19 r7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have in ected t e omponents described r t in this Owner's Report during the period t , and state that to the best of my knowledge and belief, the wner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from orconnected with this inspection.
lnsp Vs Signature Commissions Factor Mutual 4956 N 7 National Board, State, Province, and Endorsements Date is~P{12/B2)a'*Arkvright Mutual I'nsurance Company Page 1 of 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASIVIE Code Section XI Florida Power tg Light Name P.O.Box 529100, Miami, FL 33152 Ad dr e$$Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3'Work performed by BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identitication of System ReaCtOr PreSSure VeSSel 5 7 87 Sheet of 1 Unit NCR-C-31 8-8 7P CVOz DZ-2087 PCMz 87-113 Rerselr Organization P.O.No., Jots No., etc.Type Code Symbol Stamp lV/A Authorization No.N/A Expiration Oate N A (b)APPlicable Edition of Section XI Utilized for RePsirs or Reolacements 19 80 i EditiOnr Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manu tacturer Manutscturer Serial No.National Board No.Other Identitlcation Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Reactor Pres-Babcock 8 ssel Vilcox Lug 610-0116 N-161 FV-1 1970 Repair~7.oescriptlonof work Cut and replaced Reactor Head Shroud Support lug (MK-24).B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure P Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is Included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'his form.(12/82)This Form (E00030)msy be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Backl 9 R,mk, Examinations erformed b FPL, Construe Applicable Manufacturer's Oats Reports to be enacned ordance with NCR-C-318-87P.
Veldin erformed in accordance with FPL Veld Control Manual and site rocedures.
uali t Grou A.CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol StampÃ/A Certificate of Authorisation No.iV/A Expiration Oate N/A w ror wner's nee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the peried to , and state that to the best of my knowledge and belief, the Owner has performed examinations and t ken corrective measures described ln this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspect r Signature Commissions Factor Mu tug 1 4956 N 7 National Board, State, Province, end Endorsements Oate 19M/(12/B2)"*Arjcvright Mutual insurance Company Page 1 of'FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner Flori da Po~er 8 Li ght Name P.O.Box 529100, Miami, FL 33152 2.Plant Address Turkey Point Name P.O.Box 3088, Florida City FL 33034 Address 3.Work Performed by BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Ident)fication of System I'ntake COOling Water System Date 5 30 87 poser~or Unit NCR-659-86 8 PCM: N A Repair Organization P.O.No., Job No., etc.Authorization No.N A Expiration Date N A isi Appiiaapi~paiiis oipearioo Xlurlrtaaaior RspaimorReplmemspmip
>rp, Edition, parrter ipt1 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board.No.Other identification Year'Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Vlv 4-212 to 4" Pi e Bsk Str.to 4" 90 Elboar N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A ep ace-ment ep ace-ment No No Bsk Str.to 8" 90e Elb E Bsk Str.to 8" 90 Elb V N A~N A" N/A N/A N/A N/A N/A N/A N/A ep ace-ment ep ace-ment" No No 7.Descrlptionof Work Re laced heavily corroded studs and nuts for the flanges to the above i tems.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.sF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls 8$in.x 11 inre (2)informa-tion in items 1 through 6 on thh report h included on each sheet, and (3)each sheet ls numbered and the number of sheets h recorded et the top of thh form.(12/82)This Form (EQQ030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.100'l7 Page 2 of 2 FORM NIS.2 (Back)9.Flemarks Examinations erformed h PPZ, Construe Appllcabr~Manufacturer's Data Reports to ba attached in accordance with NCR-659-86.
guality Group C.CERTIFICATE OF COMPLIANCE ASME Code, Section XI~repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed/ArJ.Sire Oata Ow r o Own r's Oasig, Title s 4 p7 ,19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period 2/Z to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any peitonal injury or property damage or a loss of any kind arising from or connected with this inspecti lnsp r's Signature Commissions Factor Mutual 4956 N 2 National Board, State, Province, and Endorsamants Oate f9~+(12/B21*"Arkwright Mutual Znsurance Company Page 1 oZ 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power&Light Name P.O.Box 529100, Hiami, FL 33152 Address 6/1 6/87 Sheet of I 1 Unit 4 NCR-9 3-~Ch'Oz N/A PCHz N/A Raoalr Organization P.O.No., Job No., etc.N/A Type Code Symbol Stamp Authorization No.Expiration Date N A N A Plant Turkey Poi nt Name P.O.Box 3088, Florida Ci ty, FL 33034 Ad dress 3.yyork performed by BeChtel COnStruCtiOn, InC.Name P.o.Box 3218 Florida City, FL 33034 Addre55 4.Identification of System ChemiCal and VOlume COntrOl SyStem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year 8uilt Repaired, Replaced>or Replacement ASME Code Stamped (Yes or No)Penetration 24 C N A N/A N/A N/A N/A Repair No 7.Description ofyyork Removed an le welded to the pipe at Unit 4 penetration 24 C.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)s(ze is 8N in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top oe this form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York" ,N.Y.10017 Page 2 of 2 FORM NIS 2{Back)9.Remarks Examinations erformed ls FPL Construct'on Applicable Manufacturer's Octa Reports to be attached in accordance arith NCR-953-86.
Quality Group B.CERTIFICATE OF COMPLIANCE conforms to the rules of the ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Own or 0 er s Oesig e Title 5r gg&6'rZ Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of ave'nspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, th Owner has performed examinations nd ta n corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
inspect Signature Commissions Factor Mutual 4956 N 2 National Board, State, Province, and Endorsements Date (12/B2)'e'eArkvright Mutual Insurance Company Page 1 of'FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power 8 Light Name P.o.Box 529100, Hiami, FL 33152 Address 616 87 Sheet of plant Turkey POint Name P.O.Box 3088, Florida City, FL 33034 Unit NCR-953-86 W A PCMz N A Address 3, Work performed by BeChtel COnStruCtian, ZnC~Name P.Q.Box 3218 Florida Cit, FL 33034 Address 4.Identification of System Demineralized Water Supply Aepelr Organization P.O.Na..Jab Na., etc.Type Cade Symbol Stamp N/A Authorization No.N/A Expirstlan Date N A (b)Applicable Edition of Section Xl Utilized far Repairs or Replacements 19 80, Edition, Wi nter 1981 Addenda 6.identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Penetrati on 47 N A N/A N/A N!A N/A Repair No 7.Descriptionof Work RemOVed an le Welded tO the i e at Unit 4 penetratian 47.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.eF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings msy be used, provided (1)size is 6'1 in.x 11 in., (2)informa-tion in items 1 through 6 on this report ls included on each sheet, snd (3)each sheet is numbered and the number of sheets is recorded at the top o.this form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Back)g.Remarks Examinations erformed b FPL Construe ion Aoplicsbls Msnufsctursvs Oats Reports to be attached a cordan e arith NCR-953-86.'uality Group B.CERTIFICATE OF COMPLIANCE conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate ot Authorization No, N/A Expiration Date N/A Signed 0 ner r nar's 0's, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*ot hav inspected the components described in this Owner's Report during the period'to , and state that to the best of my knowledge and belief, the wner has performed examinatio and t en corrective measures described in this Owner's Report in accordance with the requirements ot the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner tor sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
In toVs Signature Commissions Factor Mutual 4956 N hlationsl Board, State, Province, and f ndorssmants Date{12/B2)**Arkvright Mutual Znsurance'ompany Page 1 of'FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power Ig Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3 Work performed by BeChtel COnStruCtiOn, Zno~Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of system Znetru>ent Air Syeterrt Date 6 16 87 sheei~ai 1 Unit 4 NCR-953-86 PCHz N A Repair Orpanlzatlon P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 r Zdi tion, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components E Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Penetration N A N A N/A Repair No 7.Description of Work d an le welded to the i e at Unit 4 entration 63.B.Tests Conducted:
Hydrostatic Q'neumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.'F N/A NOTE: Supplemental sheets in form of l(sts, sketches, or drawings may be used, provided (1)size Is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is~recorded at the top o'his form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2{Back)g R,mk, Examinations erformed b FPL Constructio a Applicable Manufacturer's Data Reports to be anacned in accordance arith NCR-953-86.
guali ty Group B.CERTIFICATE'OF COMPLIANCE conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No.N/A Expiration Date N/A Signed 0 ner 0 ner's Des nee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of ha inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, t e Own r has performed examinations and t en corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
inspect s Signature Commissions Factor Mutual 4956 N National Board, State, Province, and Endorsaments Date{12/821**Arkvright Mutual Znsurance Company Page 1 of'FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Poiver S Ligrhf Name P.O.Box 529100, Miami, FL 33152 Address Oate 6 16 87 Sheet~of 55 CMr 87-169 Repair Organization P.O.No., Job No., otc.N/A N/A Address 3.Work performed by BeChteE COnStruCtiOn, ZnC.Name Type Code Symbol Stamp Authorization No.Expiration Date P.O.Box 3218 Florida Cit, FL 33034 Address N A 4.Identification of System COm Onent COOlin Water plant Turkey Point Unit Name P.Q.Box 3088, Florida City, FL 33034 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 r Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)4-ACH-100 4-ACH-104 795A-7 796A-2 N A N/A N/A N/A N A N A N/A N/A NtA N A N A N/A N/A NtA N A N A N/A N/A N/A N!A N A N/A N/A N/A Replace-ment Replace-ment Rep ace-ment Replace-ment Replace-menf: No No No No 7.0 scriptlonof Work FabriCated and inSf-alled neV PiPe SuPPOrtS f'r 2" and 3" PiPe.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)s(ze is Beh in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top cr'his form.(12/B2)This Form (E00030)may be obtained from the Order DeptASME, 345 E.47th StNew York, N.Y, 10017 Page 2 of'FORM NIS.2{Back)9, Remarks Z+aminati ons erformed b FPL Construct'o Applicable Manufacturer's Data Reports to be attached in accordance arith CWOs DE-2E22, P.S.B7-E55 and PCM: 87-E69.Welding erformed in accordance with FPL WeEd Control Manual and si te procedures.
guali t Grou C.CERTIFICATE OF COMPLIANCE ASME Code.Section Xl.repair or replacement Type Code Symbol Stamp Certificate of Authoriz'No.N/A N/A Expiration Date N/A Signed Owner or Owner's Oesignee, Title.19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned.
holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspected the components described in this Owner's Report during the period to , and state that to the"best of my knowledge and belief, the Owne has performed examinations an taken corrective measures described in this Owner's Report in accordance with the reouirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspec's Signature Commissions Factor Mutual 4956 National Board, State, Province, and Endorsements Date (I2/82)**Arkwright Mutual Ensurance Company Page 3 of FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the provisions of the ASME Code Section XI 2.Plant Flori da Power if'ight Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Gate 6 16 87 (heat~oh 3 Unit Repair oreanlaadon p.o.No., Job No., atc.Type Code Symbol Stamp N A Authorization No, N/A Expiration Oate N A Address 3.Work Performedby BeChtel COnStruCtiOn, Zno.Name P.O.Box 3218 Florida Ci t, FL 33034 Addrcu 4.Identificationof system Com onent Coolin Water Name P.O.Box 3088, Florida City, FL 33034 CH'Os Dl-2122 P.S.87-155 PCMr 87-169 B.identification ot Components Repaired or Replace and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped IYes or Nol 796A-4 79-6 796A-10 796A-ll 797A-2 797A-5 N/A N A N/A N A N A N A N A N A N/A N A N A N A N A N A N/A N A N/A N/A N/A N/A N/A N A N/A N/A N/A N/A Replace-m nt Replace-ment Replace-ment Rep ace-ment Replace-ment Replace-ment Replace-ment No No No No No No 7.Description ofwork Continued from Sht 1 of 3 Page 4 of 4 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the provisions of the ASME Code Section XI 2.Plant FIori da Poorer 8 L,ight Name P.O.'Box 529100, Miami, FL 33152 Address Turkey Point Sheet ot Unit 4 oa,e 6/1 6/87 Name P.O.Box 3088, Florida Ci ty, FL 33034 Address 3 Work Performed by BeChte1 COnStruCtiOn, Eno.Name P.O.Box 3218 Flori da Ci t, FE 33034 Address 4.identification of system Com Dl-2122 P.S.87-155 PCMz 87-169 Aaoair Oraanlzation P.o.No., Job No.~atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oate N A B.Identitlcation of Components Repaired or Replaced and Replacement Components Name ot Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped IYes or No)797A-7 N N A eplace-eplace-ment No No 7.Oescriptionof Work Conti nued from Sht 1 of 3 Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Poaer 8 Light Name P.O.Box 529100, Miami, FL 33152 Address Da,e 6 16 87 Sheet~of Type Code Symbol Stamp Authorization No.Expiration Date plant Turkey Point Unit Name P.(j.Box 3088, Flori da Ci ty, FL 33034 CffOz Dl-2153 P.S.87-165 PCM: N/A Address Repair organization p.o.No., Job No., etc.3.Work performedby Beo'htel COnStruCti On, InC.N/A Name N/A p.a.Box 3218 Florida City, FL 33034 N A Address f 4.Identification of system Chemical and Vol ume Control System ib)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No, Other Identincation Year Built Repaired, Replaced, or Replacement ASME Code Stamped IYes or No)4-SI'H-42'/A N/A N/A N A N/A Replace-Replace-ment No 7.Description of work Re laced i e su orts 4-SIH-42 and 4-PRffH-II.
8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.'F N/A NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided i1)size Is BS in.x 11 in., i2)informs-tion in items 1 through 6 on this report Is included on each sheet, and i3)each sheet is numbered and the number of sheets is recorded at the top e'his form.This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 tBack)9.Remarks Examinations erformed b FPL Construe'on Applicable Manufacturer's Data Aaoorts to be anacnad in accordance with P.S.87-165 and CVO Dl-2153.Velding performed in ordance with FPL Veld Control Manual and site procedures.
ali t Grou B.C'ERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A.9r.rZQCr~Sr~,~d99a'.Signed Date wne oro naVs D ig ae, Title 99//~, 8'7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, th Owner has performed examination and taken corrective measures described in this Owner's Report in accordance with the reouirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lnsp ops Signature Commissions Factor Hutual 4956 N National Board, State, Province, and Endorsamants Date 19~1P{12/B2)**Arjcwright Mutual insurance Company Page I of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power s Light Nome P.O.Box 529100, Miami, FL 33152 Address Date 6 I 7/87 Sheet I of I Unit 4 WO DI-2081 P.S.87-160 CPftoz 87-199 Repair Organization p.o.No., Job No., otc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oats N A pis<<Turkey Poi nt Name P.O.Box 3088, Florida City, FL 33034 Address 3.yyork performed by BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Ad cl rosa 4.Identification of system Reactor Vessel Gas Vent System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 I Edition, Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Norns of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Haner¹2 N/A N/A N/A N/A N/A Rep ace-ment 7.Description ofyfork Modified su ort H-2 by adding reinforcing menbers to the existing pipe support which will reduce the resultant stresses.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.$F N/A NOTE: Supplemental sheets in form of Ihts, sketches, or drawings may be used, provided (1)size ia BS in, x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet h numbered and the number of sheets is recorded at the top o'.thh form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2{8ack j g.Rer arks EXaminatianS erfOrmed b FPZ, CpnStruC i pn a Apolicsbls Manufacturer's Dsts Reports to bs attached in accordance with CWO: DZ-2081 P.S.87-160 and CPWO: 87-199.Welding erformed in accordance wi th FPL Weld Control Manual and site procedures.
uali t Group A.CERTIFICATE OF COMPLIANCE we certify that the statements made in the report are correct and this~epl t conforms to the rules of the ASME Code,Section XI.repair of replacement Type Code Symbol Stamp N/A Certificate of Authorization No.0 sr or ne s Oesignse, i e N/A Expiration Date 5 N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspected the components described in this Owner's Report during the period'to , and state that to the best of my knowledge and belief, t Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection lnspsc r s Signature Commissions Factor Mutual 4956 N 1 National Board, State, Province, snd Endorssmsnts Date 19~+{12/B2)**Ark+right Mutual 1'nsurance Company Page 1 of 2 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power 8 Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida Ci ty, FL 33034 Oa,e 6 18 87 Sheet 1 of Unit NCR-C-724-87S M: N A Address 3.Work Performed by BeCh tel COnStruCtiOn, ZnC~Name P.O.Box 3218 Florida Cit, FL 33034 Address 4.Identification of system Com onent Cooling Pater Raoalr Organization P.O.No., Job No., atc.Type Code Symbol Stamp Authorization No.N/A Expiration Oats N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Hinter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Han er 5 N/A N/A N/A N/A N/A Replace-7.Description of Work Modified and replaced hanger 5.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.'F N/A NOTE: Supplemental sheets in form of l)sts, sketches, or drawings may be used, provided (1)size is 6'A in.x 11 in., (2)informa-tion in items 1 through 6 on this report Is included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top tr.'his form.(12IB2)This Form (E00030)may be obtained from the Order Oept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)9 Remk, Examinations erformed b FPL Construct'pplicable Manufacturer's Data Reports to be attached 2 d'f ed'ccordance with CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No./.Signed Own or 0 neVs 0 signee.T'e N/A Expiration Oate/m~Sire.Wf'n bate N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge snd belief, t Owner hss performed examinstio and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal Injury or property damage or a loss of any kind arising from or connected with this inspectio lnsp or's Signature Commissions Factor Mutual 4 56 N National Board, State, Province, and Endocsements Date 19'12/82)**ArJtwright Mutual Znsurance Company Page 1 oS 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Date Sheet~of Unit NCR>>197-86 CÃOz DI-1804 PCM: N/A Aaoalr Organization P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A O nFlorida Power&Light Name P.O.Box 529100I Miami r FL 33152 Address 2 plant Turkey Point Name P.O.Box 3088, Flori da City, FL 33034 Address 3.Work performed by BeChtel COnStruCti On, Zno~Name P.O.Box 3218 Florida City, FI 33034 Address 4.Id,nt,f;tionofsys<<m Chemical and Volume Control System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Zdi tion, Wi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Support SR-934 Bergen Patterson N/A N/A N/A N/A ep ace-ment 7.Descriptionofyyork Re laCed COrrOded Spring SuppOrt and anChOr bOltS tO SR-934.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.OF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings msy be used, provided (1)size is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered snd the number of sheets is recorded at the top o.'his form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)R,mk, Examinations erformed b FPL Construe applicable ivianufacturer's Oats Reports to be attached i-l 7-8 CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorizatio o.N/A Expiration Date N/A Signed Owner or Owner'gn'~, 0 N Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lnspe r's Signature Commissions FaCtOr MUtual 4956 Nat{onal Board, State, Province, and Endorsernents Date (12/B2)"*Ardri ght Mutual Znsurance Company Page I of 2 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power&Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.'Box 3088, Florida City, FL 33034 Date 8 5 87 Sheet~af Unit NCR-433-86 N A Address 3 work performed by Bechtel constructi on, Inc.Name P.O.Box'3218 Florida Cit, FL 33034 Address Repair Organisation P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System Auxi li ar Feedwater Su 1 S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Hinter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Su ort C N A N/A N/A N/A N/A Replace-ment No H-2 Anchor A N/A N A N/A N/A N/A N/A N/A N/A Replaced No Replace-N/A 7.Description of work Pi in inade uatel su orted.Fabricated and installed new support and anchor.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in., (2)informs.tion in items 1 through 6 on this report is inciuded on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'.this form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)g Remarkt EXaminatiOnS erfOrmed h PPL CpnStruCti p Applicapla Manufacturer's Oats Reports to ba attacnad erformed in accordance with FPL r I Ma ual and site rocedures.
uali t Grou C.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization o.N/A N/A Expiration Date N/A Signed Owner or Owned Oasi a, u Date l9~t CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the owner hss performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspectio In toVs Signature Commissions
<actor Mu tua I 4956 N I'ational Board, State, Province, and Endorsamants Date IBMZ (12I82I""Arkvright Hutual Znsurance Company Page I oS 2 FORM Nlse2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power Ig Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point P.O.Box 3088, Florida City, FL 33034 Address 8-5-87 Sheet of 1 S Unit 4 NCR-C-429-87 CVOz DI-1900 PCHz N/A ftenalr Organization P,O.No., Job No., etc.3.yllork performedby Bechtel COnstructiOn Inc.Name P.O Box 3218 Flori da Ci ty, FL 33034 Address Type Code Symbol Stamp Authorization No.Ex piration Date N/A N/A 4.Identification of System Pressurizer S ra S stem e (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Support 4-RCH-II N A N/A N/A N/A N/A Replace-ment No 7.Descriptlonof work Modif'ied su ort b replacing the base plate and anchor bolts.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure P Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8th in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top a.'his form.(12162)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Back)9.Remarks Examinations erformed b FPL Construe'a Applicable Manufacturer's Data Reports to be attached rdance with NCR-C-429-87.
8'eldin erformed in accordance wi th FPT.dures.uali t Grou A.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No.N/A Expiration Oste N/A~/-Ow r or ner's aslgn, Ti e fiQ3 8/rc'6~CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler snd Pressure Vessel Inspectors and the State or Province of snd employed by*of have inspected the components described in this Owner's Report during the period to snd state that to the best of my knowledge and belief, the Owner has performed examinations an taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable In any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
In tor's Signature Commissions Factor mutual 4956 N National Board, State, Province, and Endorsaments Date N 7 gg~/(12/B2)<<<<Arkwright Mutual Insurance Company Page 1 of 2'FORM N)Se2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power a Light Name P.O.Box 529100, Miami, FL 33152 Addrese Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Date defer~of Unit NCR-946-86 PCM: N A Address 3.Work performedby BeChtel COnetruCti On, ZnC.Nelll~P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of System Main Steam Syetem Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N A Repair Organization IP.O.No., Job No., etc.fdf Appffeedfe Edirioo of Eeedo xf dddred fo Repefreor Repfeeemeo oe fp EEf, Edition, ffinter 1981 Addedda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)N A N A N/A N/A N/A Replaced No SF N A N/A N/A N A N/A N/A N A N/A N/A N/A N/A N/A N/A N/A N/A eplace-eplace<<ment eplace-ment No No No 7 Description of work Removed existing support H-24 and installed new supports SDrSE and SF.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in., (2)informs.tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top tr'his form.(12/62)This Form (E00030)may be obtained from the Order DeptASME, 345 E.47th St., New York, N.Y, 10017 Page 2 of 2 FORM NIS 2{Back)B R,mk, EXaminatipnS erfOrmed b FPL CpnStruCt'Applfcable Manufacturer'9 Data Reports to be attached in accordance hrith NCR-946-86.
Velding performed in accordance with FPL Veld Control Manual and site procedures.
Quality Group B.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.~.7~Signed wne or ner's signee, Title N/A Expiration Date Sl7 8~4/Z.Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of hav inspected the components described , and state that en corrective measures described in this in this Owner's Report during the period'to to the best of my knowledge and belief, t Owner has performed examinatio and Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss ot any kind arising from or connected with this inspectio.t nspe's Signature Commissions Factor Mutual 4956 N I National Board, State, Province, and Endorsements Date<I2/B2)**Arkvri ght Mutual Insurance Company Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power Ig Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3.yyork Performed by BeChtel COnStruCtiOn, ZnC.Netne P.O.Box 3218 Florida Cit, FL 33034 Address 4.Identification of System Safet Zn'eCtian SyStem Date Sheet~et Unit NCR-829-86 CWO: Dl-1822 PCM: N/A Repair Organization P,O.NaJab No., etc.Type Code Symbol Stamp Authorization No.N/A Expiration Oate N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Wi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)4B Accumulato Relief Valve Pi ping N/A N/A N/A N/A N/A Repair No 7, Oescrjpt ion of yyprk Removed damaged pi pi ng between valve 4-881G and tee by grinding and buf'f-ing.Replaced piping and hanger to z.ts origina con zgura ion.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Othe LStI preset~pet Teetsemp.~'p Systems Leakage Test*See Remarks NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BSA in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is , recorded at the top o'his form.(12/82)This Form (E00030)may be obtained from the Order Oept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 teackl g Re>><<s Examinations erformed b FPL Constru t'o a Apolicable Manufacturer's Date Reports to be attacners in accordance with NCR-829-86.
Weldin performed in accordance with FPL Veld Control Manual and site procedures.
Quality Group B.*Code Case N-416 invoked;Hydrostatic Pressure Test will be performed during 10 year systems hydrostatic pressure test.CERTIFICATE OF COMPLIANCE conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No.N/A N/A Expiration Date N/A~~/-0 n or ner's rZ.AZ.4zre.Oate gnee, Title.19'ERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of ave inspected the components described r in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectio lnspe r's Signature Commissions Factor Mutual 4956 National Board, State, Province, and Endorsements Date fBM7 (12/82}""Arkwright Mutual Znsurance Company Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power 8 Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Nafnd P.O.Box 3088, Florida City, FL 33034 Address 3.Work performed by BeChtel COnStruCti On, Zno.Name P.O.Box 3218 Florida City, FL 33034 Address 8-14-87 Sheet 1 of Type Code Symbol Stamp Authorization No.Expiration Date N/A N A N A Unit NCR-C-515-87 CSOz Dl-2081 PCM: N/A Repair Organization P.O.No., Job No., etc.4.Identification of System stem 4C Steam Generator (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, h'i nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)4-MSH-22A 4C Generator Main Steam Li ne N/A N A N/A N/A N/A N/A N/A N/A N/A Replace-N/A Repai r No 7.Description of Work Re laced s rin can support and supporting structural steel.Replaced welded stanchion on Main Steam Line.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.oF NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BN In.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'h(s form.(12/B2)This Form (E00030)msy be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2{Back)g R,mk, Examinations erformed b FPI Construe ion u Applicable Manufacturer's Data Reports to be attached in accordance with NCR-C-515-87.
Welding performed in accordance with FPI Weld Control Manual and site procedures.
uali t Group B.cERTIFIGATE oF coMPLIANGE
- ~Repair/RePlacement We certify that the statements made in the report are correct and this*it'onforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.+7 N/A/WJ Jir Expiration Date N/A r OI'nar'slgnee, Title CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period't , and state that to the best of my knowledge and belief, the Owner has performed examinations an taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
insp or's Signature Commissions Factor Mutual 4956 N National Board, State, Province, and Endorseinants Date 1B+7 f12/82)~*Arkwright Mutual Insurance Company Page I of 2 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section)f(Florida Power S Light Name P.O.Box 529100, Miami, FL 33152 Address 2.plant Turkey POint Name P.O.Box 3088, Florida City, FL 33034 Address 3.Work performed by BeChtel COnStruCtiOn, I'nC.Name P.O.Box 3218 Florida City, FL 33034 Address Date 8 14 87 Shee2.Plant Address Turkey Point Name P.O.Box 3088, Florida Ci ty, FL 33034 Unit 4 NCR-81 9-86~DI-1826 PCMr N A Address 3.Work performedby BeChtel COnatruCtiOn, ZnC.Name P.0.Box 3218 Florida City, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N A Repair Oreenlzetlon P.O.No., Job No., etc.4.Identification of System Steam Generator BEowdown S stem (b)Appllcabls Edition of section xl Utilized for Repairs or Replacements 19 80, Edition, Hinter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)H-423-11 N/A N/A N/A, N/A N/A Replace-nt No 7.Oescriptionof Work RemOVed and reinStalled neW Strut.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.eF N/A NOTE: Supplemental sheets in form of Ihts, sketches, or drawings may be used, provided (1)size h BS in.x 11 in., (2)informa-tion in items 1 through 6 on thh report h included on each sheet, snd (3}each sheet h numbered and the number of sheets is recorded at the top o'his form.This Form (E00030)may be obtained from the Order Oept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Back)g R,mk, Examinations erformed b FPL Construe i a Applicable Manufacturer's Qsts Reports to be attached in accordance with NCR-819-86.
fsrelding performed in accordance with FPT d ontrol Manual and site rocedures.
Grou B.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No.N/A N/A Expiration Date N/A Signed rjy@f7~=mph'ne or wner'signee, Title Date , I9 PT CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding'a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspe ted components described\in this Owner's Report during the period to/'P~to the best of my knowledge and belief, the wner hss performed examinsti s and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of sny kind arising from or connected with this inspectio lns tor's Signature Commissions FaCtpr Mutual 4956 N National Board, State, Province, snd Endorsements Date IB~F'Z 112182)"*Ark@right Mutual Znsurance Company Page I of'FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power 8 Light N arne P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Date 8 25 87 Eoeef~of Unit NCR-1 51-86 PCM: N A Address 3.work performed by Bechtel Construction, Znc.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of system ontainment Pur e S stem Repair Organization P.O.No., Job No., atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A Ibl APPlicable Edilio of Eemlo Xf Udffzed fo RePaimo Reofmeme fa 19 Eff sffdddfaR ffERERX$999 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification
~Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Valve 4-2601 Henry Pratt Co.N!A N/A N/A N/A Repair 7.Descflptfonof work Weld repair of gouge to seating edge of'alve disc.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings msy be used, provided (1)aise is 8'h in.x 11 in., (2)informa-tion in items 1 through 6 on this report ls included on each sheet, snd (3)each sheet Is numbered and the number of sheets is recorded at the top o'his form.This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2{Back)g R<<elks Examinations erformed b FPL Constructio a Applicable Manufacturer' Oats Reports to be attached in accordance with NCR-151-86.
Velding performed in accordance with FPL Veld Control Manual and site procedures.
Quality Group B.CERTIFICATE OF COMPLIANCE conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No N/A Expiration Oate N/A Signed wn or wner's 0 I ee, Titletv CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of h e inspected the components described in this Owner's Report during the period P4 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
inspect s Signature Commissions Factor Mutual 4956 National Board, State, Province, and Endorsements (12/82I**Arkvright Mutual I'nsurance Companti Page 1 OZ 2 FORM NIS 2 OWNER'S REPORT FOR REI'AIRS OR REPLACENIENTS As Required by the Provisions of the ASME Code Section Xi 2.Plant Florida Power h Light Name P.O.Box 529100, miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3.Work performed by BeChtel COnStruCtiOn, 1 no.Name P.O.Box 3218 Flori da Ci ty, FL 33034 Address 4.Identification of System 8/27/87 Sheet ef 1 Unit 4 NCR-364-86 CVOz Dl-1675 PCHr N A Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp N!A Authorization No.N A Expiration Date N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition r Hinter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built~Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Support NR-18-B N/A N/A N/A N/A Repair 7.Description of Work'red weld discre ancies identified h ZSZ walkdown.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psl Test Temp.'F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings msy be used, provided (1)size is B~A in.x 11 in(2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top e'his form.This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2{Back)9 Remarks Exami nati ons erformed b F'PZ Constructi on Appilcabia Manufacturer's Data Reaorts to be attached Veld Control Manual and site procedures.
Quali t Grou B.CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this p conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorisation No.N/A Expiration Oate N/A Signed wnar r 0 jgdJ i 5s 7m M6<nar's Oasi e, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of ve inspected the components described in this Owner's Report during the period t and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection inspa r's Signature Commissions Factor Mutual 4956 N I National Board, State, Province, and Endorsamants Oate (12/82)~*Arkwright Mutual Ensurance Company Page 1 of 2 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 0 ner Florida Po>er h Light Nome P.O.Box 529100, Miami, FL 33152 pate 8 27 87 Shee<~af 2.Plant Address Turkey Point Nome P.O.Box 3088, Florida City, FL 33034 Unit NCR-257-86
~-75 CM: N A Address 3.work performed by Bechtel Construction, Inc.Name P.O.Box 3218 Florida City, FL 33034 Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N A Repair Organization P.O.No., Job No., etc.4.Identification of System Address Reactor Coolant System (b)Applicable Edition of section xl Utilized for Repairsor Replacements 19 80, zdi tion, p7inter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Coolant Loop RTD's N/A N/A N/A N/A N/A Rep ace-ment 7.pescrjptjon of Work Replaced corroded bolting for 2"-RC-1407-FBr ori fi ce flange.8.Tests Conducted:
Hydrostatic P Pneumatic Q Nominal Operatmg Pressure Q Other Q Pressure psi Test Temp.sF N/A+See Remarks NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size Is Bys in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'.this form.(12/82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM N IS.2 (Back}9 Remarks Exami nati ons erformed b FPL Constructi n Appifcaoie Manufacturer's Data Reports to be attached in accordance syith NCR-257-86.
ualit Grou A*Mechanical
'oint not broken, studs replaced one at a time.CERTIFICATE OF COMPI.IANCE ASME Code,Section XI.repair or replacement Tvoe Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A wn or wner's e lance, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have inspected the components described jn this Owner's Report during the period , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the reouirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
nspector's Signature Commissions Factor Mutual 4956 N 2 National Board, State, Province, and Endorsements Date 19M I12/B2I"*Arkwright Mutual Insurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Potver&Light.Name P.O.Box 529100, Miami, FL 33152 Address 2.plant Turkey POint Name P.O.Box 3088, FIorida City, FL 33034 Address 3.Work performedby BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City FL 33034 Ad dress Date Sheet~et Unit 4 NCR-175-86 VOz Dl-1675 PCM: N A Repair Organization P.O.No.~Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System Saf'et I'n ection S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements
'l9 80, Edition, Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Pipe Support H-809-05 N/A N/A N/A N!A Replace-ment No 7.Descriptionof Work MOdified eXiSting SuPPOrt.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.N/A NOTE: Supplemental sheets, in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in(2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered snd the number of sheets is recorded at the top o'his form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2 (Bacicj g R,mk, Examinations erformed b FPL Constru t'AOPlicable Manufacturer's Data Reports to be attached in accordance with NCR-175-86.
Veldin erformed in accordance with FPL.h'eld Control Manual and site rocedures.
uali t Grou B.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authorization No.Signed Ow er or n r's Das'e.Title N/A N/A Expiration Oate Zi7~N/A CERTIFICATE OF INSERVICE INSPECTION I, the underSigned, hOlding a Valid COmmiSSian iSSued by the NatiOnai BOard Of BOiler and PreSSure VeSSel InSpeCtOrS and the State or Province of and emploved by*of have'nspected the components descnbed in thiS Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinatio and t en corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss ot any kind arising from or connected with this Inspection.
lns tor's Signature Commissions Factor Mutual 4956 N I National Board, Stats, Province, and Endorsements Oats<12/B2)**Arkwright Mutual Insurance Company Page I of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Potver&Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Date 8/27/87 oeeer~of Unit 4 Name P.O.Box 3088, Florida City, FL 33034 Address 3.woflt performed by Beohtel COnStruC ti On, SnC.Name P.O.Box 3218 Florida City, FL 33034 Address NCR-2I7-86
~-1675 PCM: N A Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System stem 5.(s)Applicable Construction Code B31~I fof ooooesofeororfo ofoeerfo xr uoffreo for ReoefrsorReormeme rs f9 88, Edition, wintet i98i Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Pipe Support H-810-02 N/A N/A N/A N/A N/A Replace-No 7.Description of work Modified existing support.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.RF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings msy beused, provided (1)size is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'.th(s form.(12/62)This Form (E00030)msy be obtained from the Order Dept., ASME, 34S E.47th StNew York, N.V.10017 Page 2 of 2 FORM NIS.2 tBack)9.Remarks Examinations erformed b FPL Construe i Applicable Manufacturer's Data Reports to be attached in accordance wi th NCR-217-86.
hrelding performed in accordance with FPL d Control Manual and site rocedures.
uali t Grou CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Signed Ow er or ne s Oesigne T tie Certificate of Authorization No.N/A Expiration Date fr/Afg SI g~Date N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of h e inspected thy components described in this Owner's Report during the period to d'I , and state-that to the best of my knowledge and belief, the Owner has performed examinati s and aken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspect s Signature Commissions Factor Mutual 4956 N I National Board, State, Province, and Endorsaments Date (12/82)**Arkwright Mutual Lnsurance Company Page 1 of 2 FORM NISe2 OINNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code,Section XI 2.Plant Florida Power S Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Date Sheet~of Unit 4 Name P.O.Box 3088, Florida Ci ty, FL 33034 Ad(tress 3.Work performedby BeChtel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N A NCR-251-86 CWOr D1-1675 PCM: N/A Repair Organization P.O.No., Jots No., stc.4.Identification of System lant S stem.Iol Aoollaahle soltlo of seaooo xt usllaeo fo Reoa'tee Reolaeememl ls 88, Edition, ffinrer 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacesnent ASME Code Stamped IYes or, Nol Coolant Loop RTD's N/A N/A N/A N/A N/A eplace-ment No 7.Description ol work Re laced corroded bolts for 3"-RC-1401-FE491, weld neck flan e.B.Tests Conducted:
Hydrostatic p Pneumatic p Nominal Operating Pressure p Other P Pressure psi Test Temp.F N/A*See Remarks NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided I1)size is BA in, x 11 in., i2)informa-tion in items 1 through 6 on this report is included on each sheet, and i3)each sheet Is numbered and the number of sheets is recorded at the top o.'his form.i12/62)This Form IE00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of'FORM NIS.2 (Back)9 Remarks Exami na ti ons erformed b FPL Const ructi on Applicabla Manufacturer's Oats Reports to be anschad in accordance with NCR-25I-86.
Veldin erformed in accordance with FPI ld Control Manual and site rocedures.
Grou A.*Mechanical oint not broken, studs replaced one at a time.CERTIFICATE OF COMPLIANCE ASME Code, Section XIrepair or replacement Type Code Symbol Stamp N/A Certificate of Authonzation No.N/A Expiration Date N/A Signed Own or 0 nar'esigns, itis CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have Inspected the components described in thiS Owner's Report during the period\0 , and state that to the best of my knowledge and belief, the Owner has perforined examinations and ta en corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection Into or's Signature Commissions Factor Mutual 4956 N I'ational Board, Stats, Province, snd Endorsamants Date (12/B2)**Arkwright Mutual Insurance Company Page I of 2 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner Fl ori da Power 8 Li gh t Name P.O.Box 529100, Miami, FL 33152 Address Plant Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3.Work Performed by BeChtel COnStruCtiOn, InC~Name P.O.Box 3218 Florida City, FL 33034 Address Date Type Code Symbol Stamp Authorization No.Expiration Oate N/A Sheer J ar S Unit 4 NCR-255-86 W~DI-1675 PCMr N A Repair Organization P.O.No., Job No., etc.4.'Identification of System Com onent Coolin Water S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Zdi tion, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Vertical Stru 478-1 4-CCH-26 Double Acting Restraint N A N/A N/A N/A N/A N/A N/A N!A N/A Replace-ment Replace-No 7.Description of Work MOdified eXi Stin Su OrtS.B.Tests Conducted; Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.eF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is B)rs in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top oe this form.(1 2162)This Form (E00030)may be obtained from the Order Oept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS 2{Back)9 R,mk, Examinations erformed b FPZ, Construe i a Applicable Manufacturer's Data Reports to be anacned-55-86 Veldin erformed in accordance with FPI CERTIFICATE OF COMPLIANCE ASME Code.Section XI, repair or replacement Type Code Symbol Stamp N/A Signed wn or wner's 0 nee, Title Certificate of Authorization No.N/A Expiration.Oste gf,-~Date N/A.19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period'to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes sny warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
ln tor's Signature Commissions Factor Mutual 4956 N National Board, State, Province, and Endorsements Date (12/92I"*Arfcwright Mutual Insurance Company Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Flori da Power fg Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address Date 8 27 87 Sheet 1 et 1 Unit NCR-1078-86 86-009 Repair Orpanizatlon P.O.No., Job No., atc.3.Work performed by BeChtel COnStruCtiOn/
ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A 4.Identification of System Auxi li ar Feedwater System*-.~(bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Ni nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year 8uilt Repaired, Replaced, or Replacement ASME Code Stamped IYes or No)Valve Anchor-Darli n Anchor E-6368-1-1.6 E-6368-1-10 N A N A 10-4-381 10-4-383 1979 1979 Replace-ment Replace-ment Yes Yes 7.Description of work Removed valves 10-4-381 and 10-4-383, i nstalled replacement valves.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q other+Prert re~QQ prl Tert Porno.~'P NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided I1)size Is BS in.x 11 in., l2)informa-tion in items 1 through 6 on this report is included on each sheet, and I3)each sheet is numbered and the number of sheets is recorded at the top oe this form.i12l82)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)9.Remarks Examinations erformed b FPL Constructi n Applicable Manufacturer's Data Reports to oe attached c ordance with NCR-1078-86.
Veldin erformed in accordance with FPL Veld Control Manual and site rocedures.
guality Group C.CF RTIFICATE OF COMPI.IANCF ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Signed jtfdJ Zi.c-NW.0 ner r 0 ner's Oes ee, Title Expiration Date N/A~z~CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of ave inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Ow er has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for Sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lnsp or's Signature Commissions Factor Mutual 4956 N 2 National Board, State, Province, and Endorsements Date{12/B2)**Ark+right Mutual Lnsurance Company Page 1 of'FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner Florida Power 8 Li ght Name P.O.Box 529100, Miami, FL 33152 Address 9/3/87 Sheet of 2 2.plant turkey Point Unit 4 Name NCR-C-820-87S P O.Box 3088, Flori da Ci ty, FL 33034 CWO: C-361 PCM: N A Address 3 yyork performed by BeChtel COnStruCti On, InC~Name P.O.Box 3218 Florida City, FL 33034 Address Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A 4.Identification of System Che d me ontrol S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Othei'dentification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Pipe Restraint Pi pe Restrai nt Pipe Su port Pipe Su port Pipe Res trai nt N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A H-38 H-38'H-41 H-41 H-44 N/A Replaced No 1987 Rep ace-ment 1987 Rep ace-ment No N/A Replaced No N/A Replaced No 7 Qescrlption of+ark EXiSti ng SuppOrtS remOVed, replaCed With neW SuppOrtS.8.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.ss F N/A NOTE: Supplemental sheets in form of Ihts, sketches, or drawings may be used, provided (1)size h 6'A in.x 11 in., (2)informa-tion in itemt 1 through 6 on this report is included an each sheet, and (3)each theet is numbered and the number of sheets is recorded at the top oe thh form.(12/62)This Form (E00030)may be obtained from the Order Oept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 3 FORM NIS.2 tBackj 9.Remarks Zxaitu nati ons erformed b FPL Construct'pplicable Manufacturer's Data Reports to be attached in accordance with NCR-C-820-87S.
Yelding performed in accordance with FPL 8'eld Control Manual and site rocedures.
uali t Grou B.CERTIFICATE OF COMPI.IANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.P&s 0 ner 0 neVs es gnee, Title N/A lrtvf fp/F Expiration Date N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, t Own has performed examinations and aken corrective measures described in this Owner's Report in accordance with the reouirements of the ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection, inspect s Signature Commissions Factor Mutual 4956 N 7 National Board, State, Province, and Endorsements Date iran/I12/B2I**Arkwright Mutual Znsurance Company Page 3 of 3 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O ner Florida Power h Light Name P.O.Box 529100, Miami, FL 33152 Date 9 3 87 sheet~01 2 Address Turkey Point Unit Name P.O.Box 3088, Flori da City, FL 33034 NCR-C-820-87S PCM: N A Address 3 Work performed by Bechtel Construction, I'nc.Name P.O.Box 3218 Florida City, FL 33034 Address Repair Orpanlzation p.O.No.~Job No., etc.Type Code Symbol Stamp Authorisat)on No.N/A Expiration Date N A 4.Identification of System Chemical and Volume Control S stem Ib)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Editionr Hinter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No, Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped I Yes or No)Pipe Restraint N A N A N/A H-44 1987 Replace-ment No Pipe Restraint N A N A N A H-46 N A Re laced No Pipe Restraint Pi pe N A N A H-46 1987 Replace-ment No Re laced No Pi pe Replace-nt No 7.Descriptionof Work Conti nued from Sht of Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Flori da Power (g Li ght Name P.O.Box 529100, Miami, FL 33152 Address pla<<Turkey Point Name P.O.Box 3088, Florida Ci ty, FL 33034 Address 3.yyork Performed by Bechtel Construction, Inc.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of System intake Cooli n Water System Date 9 3 87 Shee(1 o(Unit CWOz A-401 PCMz 86-022 P.S.86-205 Repair Organization P.O.No., Job No., atc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N A ib)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Zdi tion, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped IYes or No)Butterfly Valve Butterfly 1 Butterfly But terf1 y Henry Pratt Co.Henry Pratt Co.Henry Pratt Co.Henry Pratt Co.N/A N A N A N A N/A N/A N A 4-50-307 4-50-308.4-50-309 4-50-310 N/A N/A N/A N/A Replace-ment Rep ace-ment Replace-ment Replace-ment No No No 7.Descriptionofyyork Re laced existin I'CW 1 leakage.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure P Other Q Pressure~~psi Test Temp.82'F System Leakage Test NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided{1)size is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and I3)each sheet is numbered and the number of sheets is recorded at the top o'his form.f12/62)This Form IE00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NlS.2{8ack)9, Remarks Examinations erformed b FPL Constru t'on a Applicable Manufacturer's Data Reports to be attached in accordance with CWO A-40l, PCM 86-022 and P.S.86-205.guali t Group C.CERTIFICATE OF COMPLIANCE ASME Code, Section Xl.repair or replacement Type Code Symbol Stamp N/A Certificate of As."snr:ation No.Signed wner 0 ner's 0 ee, Title N/A Expiration Date~~~Date N/Az~~CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid cosnmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Own has performed examinations an taken corrective measures described in this Owner's Report in accordance with the reauirements of the ASME Code, Sect(on XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspect s Signature Commlsssons Factor Mutual 4956 N I National Board, State, Province, and Endorsements Date{12/B2l<<<<Arkvright Mutual Ensurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power s Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Oats Sheet S of Unit 4 Name P.O.Box 3088, Flori da City, FL 33034 Address 3.work performedby Bechtel construction, znc.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identitication of System Type Code Symbol Stamp Authorization No.Expiration Oats Woz DZ-1731 PCM: 85-006 P.S.86-154 Repair Organization P.O.No., Job No., atc.N/A N/A N A (b)Appucsble Edition of Section XI Utilized for Repairs or Replscements19 80, Bdi ti on, h'i nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manutacturer Manufacturer Serial No.National Board No.Other identitication Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Pipe Su ort Pipe Su rt Pipe N A N/A N/A N/A N/A 4-RCH-33 4-RCH-34 4-RCH-35 N/A N/A N A Replace-ment Rep ace-ment Replace-ment No No 7.oescriptionof work Modified existing supports.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.N/A NOTE: Supplemental sheets in form of I(sts, sketches, or drawings may be used, provided (1)size Is B)r in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number ot sheets is recorded at the top o'his form.(12/62)This Form (E00030)msy be obtained from the Order Oept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)9.Remarks Examinations erformed b FPZ, Constr Applicable Manufacturer's Oats Reports to be attached in accordance with CWO Dl-1731 PCM 85-006 and P.S.86-154.Welding per-formed in accordance with FPL Weld Control Manual and site procedures.
F uali t Grou A.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair ar replacement Type Cods Symbol Stamp Certificate of Authorization No.Signed wn or wneV slgnee, Title N/A Expiration Date gr rF Mfs Ce.N/A f7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of snd employed by**of ve inspected the components described in this Owner's Report during the period to ,sdstt tht to the best of my knowledge and belief, the Owner hss performed examinations and ts en corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lnsp r'S Signature Commissions Factor Mutual 4956 N 1 National Board, State, Province, snd Endorsements Date (f 2/B2)*x'Arkvright Mutual Insurance Company Page 1 of 2 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power s Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Oate Sheer~of S Unit Name P.O.Box 3088, Florida City, FL 33034 CWOz A-401 PCM: 86-022 P.S.86-202 Address 3'work performed by Bechtel cons true ti on, Inc.Name P.O.Box 3218 Florida City, FL 33034 Address Repair Organization P.O.No., Jots No., etc.Tvpe Code Symbol Stamp N/A Authorization No.N/A Expiration Oate N A 4.Identification of System Zntake Coolin Water S stem S.(a)Applicable Construction Code B31~1 19 67 Edition, (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Rep'iacement ASME Code Stamped (Yes or No)Single acting i e su ort Single acting i e su ort Single acting i e su ort Single acting i e su ort N A N A N A N A N A N A N A N A H-705-01 H-705-02 H-05-03 H-705-04 N A N A Replace-ment Replace-ment Replace-ment Replace-ment No No 7.Description of work Modified existin su orts.B.Tests Conducted:
Hydrostatic P Pneumatic Q Nominal Operating Pressure Q Other Q Pressure pai Test Temp.'F N/A NOTE: Supplemental sheets in form of liats, sketches, or drawings msy be used, provided (1)size ia BS in.x 1'I in., (2)informs.tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o'his form.(12/62)This Form (E00030)may be obtained from the Order Oept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 tBack)g R,mk, Examinations erformed b FPL Construct'pplicable Manufacturer's Data Reports to be anacbed in accordance with CVO A-40l, PCM 86-022 and P.S.86-202.Velding Performed in accordance with FPL Veld Control Manual and site procedures.
guali t Group C.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of uthorization No.'N/A Expiration Date N/A Signed wn or wner's lance, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspected the components described in this Owner's Report during the period to 4', and state that to the best ot my knowledge and belief, the Ow r has performed examinations and aken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
inspec'Signature Commissions Factor Mutual 4956 N I'ational Board, State, Province, and Endorsaments Date 1 9~+(12/B2)"*Arkvri ght Mutual Znsurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power 8 Light Name P.O.Box 529100, Hiami, FL 33152 Address Date 9 Sheet~or 2.Plant Turkey Poi nt Unit Name P.O.Box 3088, Florida City, FL 33034 CWO: Dl-1340 PCMz 83-08 P.S.86-168 Address Repair Organization P.O.No., Job No., etc.3, Wark perfOrmedby BeChtel COnStruotiOnr
?no Type COde SymbOI Stamp N/A Name Authorization No.N A P.O.Box 3218 Florida City, FL 33034 N A Address Component Cooling Water System 4.Identification of System lb)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 r Edi ti on, Winter 1981 Addenda 6, Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)CCW Supply t HHSZ Pum s, Seal Water HX N/A N/A N/A N/A N/A Replace-ment 7.Description of work CCW i in between valves 4-708E 4-708F and 4-793 and ccw suction and discharge headers modified.B.Tests Conducted:
Hydrostatic P Pneumatic Q Nominal Operating Pressure Q DtherP Prepo e i<S per Tert Temp.~Nrt NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size Is BS in.x 11 in., l2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top o'his form.112/82)This F orm lE00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)9.Remarks~fraffu nations erformed b FPL, Constru'o Applicable
<vlanuiacturer's Data Reports to be attacr<ed in accordance with CVO D1-1340, PCM 83-08 and P.S.86-168.Velding performed Veld Control Manual and site rocedures.
guali ty Group C CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorizat<on No.Signed wner r 0 ner's 0 ig N/A Expiration Oate/~gi rt=ee, Title N/A lu g7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid co<nmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of ave inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examination and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection Inspect'ignature Commissions FaCtOr Mut ua1 4956 N National Board, State, Province, and Endorsements Oat (12/B2)<<*Arkvright Mutual Insurance Company Page 1 of 2 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 0 ner Florida Pothrer E Li ght ttlame P.O.Box 529100, Miami, FL 33152 2.Plant Address Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3.work performedby Beo'htel COnStruCtiOn, ZnC.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of System Reactor Coolant S stem pate 9 10 87 Sheer or Unit NCR-351-86 CWOr D1-1810 PCM: N A Repair Organ)sation P.O.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oste N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)ressuri zer elief Line N/A N/A N/A N/A N/A Repair 7.oescriptionofwork welded and machined Pressurizer Safety Valve inlet nozzle flange face f'r RV-551A, RV-551B and RV-551C.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q*other Qx p eerere~tt per Tert Temp.~p"RCS Overpressure Test NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is Bth in.x 11 in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top o.th(s form.(12/82)This Form (E00030)msy be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)9.Remarks Examinations erformed b Ppr.Construe'a Aopiicaole Manufacturer's Octa Reports to be attached rdance vi th NCR-35l-86.
Weldin erformed in accordance with FPL Veld Control Manual and site rocedures.
guality Group A.CERTIFICATE OF COMPLIANCE conforms to the rules of the ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certiricate of A thorization No.N/A N/A Expiration Date N/A Signed 0 ner Qw er's Oes n~, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have in ected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspe r's Signature Commissions F ctor Mutual 4956 N National Board, State, Province, end Endorsements Date f9~7<12/82I"*Arjcvright Mutual Znsurance Company Page 1 of'FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASMF Code Section XI 2.Plant Florida Power 8 Light Name P.O.Box 529100, Miami, FL 33152-Address Turkey Point Name Oate Fheef~of Unit 4 P.O.Box 3088, Florida City, FL 33034 Address 3'Work performed by BeChtel COnStruCtiOn, InC.Name P.O.Box 3218 Florida City, FL 33034 Address 4.Identification of system Fuel Oil S steIII (EDG)85-055 P.S.86-180 Repair Organization P.o.No., Job No., etc.Authorization No.N/A Expiration Oste N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edi ti on, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced snd Replacement Components Name of Component Name of Manufacturer Manufacturer, Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)2" Check 2" Globe Dresser d stries Dresser H820ABC H657ABG N A N A Tag no.249 Tag no.250 1982 1982 Replace-ment Replace-ment No 7.Qescriptionof work This modification rovided the addition of an alternate fuel oil supply path.B.Teats Conducted:
Hydrostatic Q Pneumatic g Nominal Operating Pressure Q ofhce p pfeeeufe~pp Teef Temp.ro'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in., (2)informa-tion in items 1 through 6 on this report is Included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.(12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 2 FORM NIS.2 (Back)g Remarks Examinations erformed b FPL Constru ti Applicable Manufacturer'$
oats Reports to be attached Velding performed in accordance with FPL hreld Control Manual and site procedures.
guality Group C.CERTIFICATE OF COMPLIANCE ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.wne r wner's e'gnee, Title N/A 5 r r</4'rP.Expiration Oats N/A , 19'ERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler snd Pressure Vessel Inspectors and the State of have inspected the components described in this Owner's Report during the period to A7 , snd state that to the best of my knowledge and belief, the Owner ss performed examinatio and taken corrective measures described in this Owner's Report'in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
inspector lgne'ture Commissions Fact or Mutual 4956 Notional Board, State, Province, and Endorsements ted<12/82)**Arjcwright Mutual Znsurance Company page 1 of 3 FORM Nlse2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power S Light Name P.O.Box 529100, Miami, FL 33152 Address plant Turke y POi n t Name P.O.Box 3088, Florida City, FL 33034 Address 3 Work Iherformed by BeChtel COnS truC ti On, InC.Name P.O.Box 3218 Florida Cit, FL 33034 Address pate 1 0/9/8 7 Sheer er 2 2 Unit 4>>>>See Remarks a e 2 of 3 Repair Organization fh.p.No., Job No., etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oats N A 4.Identification of System dwater Turbine Steam Su 1 S stem (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 19 80, Bdi ti on, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No, Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)3" Stop heck Valve'aci f J.c Valve Inc.N/A N/A tag no 4-10-119 N/A Replaced No 3" Globe al ve Paci fi c Valve Inc.N/A N/A tag no 4-10-119 N/A Rep ace-ment No 3" Stop heck Valve 3" Globe Valve 3" Stop heck Valve Paci fi c Valve Inc.Paci fi c Valve Inc.Paci fi c Valve Inc.N/A N/A N/A N/A N/A N/A tag no 4-10-219 tag no 4-10-219 tag no 4-10-319 N/A N/A N/A Replaced No Rep ace-ment Replaced No 7.Oescriptlonof Work Converted sto check valves into globe valves by rePlacing internal parts.(cont.sht 2 of 2)B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating pressure Q otheriai prese e~prr TeerTemp,~p system Leakage Test NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BS in.x 11 in..(2)informa-tion in items 1 through 6 on this report ls included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top o'his form.(12/62)This Form (E00030)msy be obtained from the Order Dept., ASME,345 E.47th St., New York, N.Y.10017 Page 2 of 3 FORM NIS.2 (Back)g R,mk, Examinations erformed b FPL Constr'on Aoolicabla Manufacturer's Data Reports to be attached in accordance with CVOs C-388, PCM: 86-009, P.S.86-l87, NCR-875-86, N R-878-86 and NCR-970-86.
Veldin erformed in accordance with FPL Veld Control Manual and si te rocedures.
Quality Group B.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Author'o o.Signed Owner or wnar's Designee, Title N/A Expiration Oats Coke.u.9919 N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have in ected the components described 9'n this Owner's Report during the perio 0 t , snd state that to the best of my knowledge and belief, the Owner has performed examinations an taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described m this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspection.
In ctor's Signature Commissions Factor Mutual 4956 N 7 National Board, State, Province, and Bndorsamants Date{12/B2)*"Arkwright Mutual I'nsurance Company Page 3 of 3 FORM NIS.2 OIINER'S REPORT FOR REPAIRS OR REPI.ACEMENTS As Required by the Provisions of the ASME Code Section XI Darner Florida Power a Li ht Name Date 87 P.O.Box 529100 Hiami FL 331,52 Sheet2 af Address 2.Plant Tur'ke Point Unit Name P.O.Box 3088 Florida Ci t FL 33034*2 of 3 Repair Organization P.O.No., Job No., etc.Address 3.Work Perfonnedby BeChtel COnStruCti n Name P.O.Box 3218 Florida Cit FL Address Type Code Symbol Stamp Authorization No.Expiration Date 4.Identification of System Auxi li ar Feedwater Turbine Steam Su 1 S stem ib)APPllcsble Edition of Section XI Utilized for RePeirs or RePlscements 19'ZditiOna@inter 1981 6."Identification of Components Repaired or Rep'laced snd Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No, National Board No.Other Identification Yes I'uilt Repaired, Replaced, or Replacement ASME Code S\sInped IYes or No)3" Globe Va1 Pacific Valve Inc.N A N A tag no 4-10-31 9 Replace-ment No 7 Description of Work COntinued from sheet 1 of 2.Duri n the course of i ns tal l-ation on valve 4-10-119, weld buildup performed on valve body in accordance with NCR-875-86.
Page 1 of 3 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant Florida Power 8 Light Name P.O.Box 529100, Miami, FL 33152 Address Turkey Point Nefne P.O.Box 3088, Florida City, FL 33034 pate 0 Sheet~et Unit 4 NCR-891-86 and VOr C-388 PCMz 86-009 P.S.86-181 Address 3 yvork performed by Bechtel Cons tructi on, Znc.Name P.O.Box 3218 Florida City, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Oats N A N/A N A Rerselr Organization P.O.No., Job No., etc.4.Identification of System AuXili ar FeedWater Turbine, Steam Su ply SyStem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80, Edition, Vi nter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Hori zontal Strut Ass N A N A N A H-334-17 N A ,Replace-ment No Horizontal Hori zontal Stop Check Stop Check N A N A N A N A H-334-19 H-334-20 tag no 4-120 tag no 4-220 N A N A N A N A Replace-ment Replace-ment No No Re laced No Re laced No 7.Oescript(onofw<<k Re laced 3" sto check valves with 4" tilting disc check valves.Replaced 3" piping with 4" piping where required to accomodate (cont.pg.2 of 3)B.Tests Conducted:
Hydrostatic Qg Pneumatic Q Nominal Operating Pressure Q Other P Pressure 1356 psi Test Temp, 80'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is BN in.x 11 in., (2)informs.tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets ls recorded at the top oe this form.(12/62)This Form (E00030)may be obtained from the Order Oept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of 3 FORM NIS 2 (Back)9.Remarks~<<flu nati ons erformed b FPL Constructi n a Aoplicabte Manufacturer's Oata Reports to be attached in accordance with CN'Os C-388, PCM: 86-009, P.S.86-181 and NCR-891-86.
8'elding performed in accordance with FPL h'eld Control Manual and site procedures.
Quality Group C.CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this conforms to the rules of the ASME Code,Section XI.repa r or replacement Type Code Symbol Stamp N/A Certificate of Authorizati o.Signed Owner or OwneVs Oeslgnee, Title N/A Expiration Date Coast'll 1 N/A CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding e valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of have inspected the components described in this Owner's Report during the period to o 8 , and state that to the best of my knowledge and belief, the Owner has performed examination and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
lnspecto Signature Commissions Factor Mutual 4956 N E National Board, State, Province, and Endorsements Date 19~2 (12/B2)"*Arjcwright Mutual I'nsurance Company page 3 of'FORM NISa2 OWNER'S REPORT FOR REPAIRS OR RFPLACEMENTS As Required hy the Provisions of the ASME Code Section XI Ordtdaner FIOri da POWer tft Li ht Oate 10 9 87 Name P.O.BOX 529100 Miami FL 33152 Sheet 2 of Address 2.Pl~~t Turke Point Name P.O.Box 3088 Florida Cit FL 33034 Address 3.Work Performedby Bechtel Constructio Name P.O.Box 3218 Florida Cit FL Unit 4 NCR-891-86 and C-388 PCM: 86-009 P.S.86-181 Repair Oreanlzatlon rp.O.No., Job No., etc.Type Code Symbol Stamp Authorization No.Expiration Oete Address 4.identification of System Auxiliar Feedwater Turbine, Steam Supply System (9)ApppasoieEaploaatpeattaattttnttseater Repsinarneptscemeatstpdd, Editinn, Winter 8988 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped IYes or No)Stop Check Valve N/A N/A N/A tag no 4-320 N/A Replaced No Tilting Disc Anchor Check Valve Darling N/A N/A tag no 4-381 N/A ep ace-ment No Tilting Disc Check Valve Tilting Disc Check Valve Steam Supply Pi in Anchor Darli n Anchor Darli ri N/A N/A N/A N/A N/A tag no 4-382 tag no 4-383 N/A N/A N/A N/A 987 Rep ace-ment Rep ace-ment ep ace-ment No No No 7.pescription of Work COntinued frOm Sheet of 2~installation of replacement valves.Reworked and reinstalled pipe supports to adapt to new piping con fi ration.
Page 1 of'FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power jg Light Nome P.O.Box 529100, Miami, FL 33152 Address plant Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3.Work performedby Bechtel Construction, inc~Name P.O.Box 3218 Florida Cit, FL 33034 Address Date 10 9 87 Sheet 1 of Unit 4 Type Code Symbol Stamp Authorization No.Expiration Date N A N/A N A W-C-388 PCM: 86<<009 P.S.86-181 Repair Organization P.O.No., Job No., etc.4, jdentjfjcatjon of System Auxi li ar Feedwater Turbine, Steam SuppLy System lhl Apppeehle Edition of seetio xs urlsseo for Repelrs o Repleeemems 19 88, nd191on, spinner 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Boarcl No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Tilting Disc Check Valve Anchor Darli n N A tag no 10-4-375 N A Replace-ment Tilting Disc Anchor Tilting Disc Anchor N A tag no 10-4-376 tag no 10-4-377 N A N A Replace-ment Replace-ment No No N A tag no 4-1403 N A Re laced No tag no 4-1403 N A Replace-'ment No 7.Descrjption of yyork Re laced 3" solid wedge gate valves for valve tag numbers 4-1403, 4-1404 and 4-1405," with 4" globe valves.Replaced 3" piping (cont Pg.3 of 3)B.Tests Conducted:
Hydrostatic g Pneumatic Q Nominal Operating Pressure p other Q Preno e~156 psl Test Temp.~9 NOTC: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (t)size is B)fE in.X f 1 in., (2)informs.tion in items 1 through 6 on this report Is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top oe this form.I12/62)This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of'FORM NIS.2 (Back)9 Remarks Zxami na ti ons erformed b FPZ, Cons tru ti o Applicable Manufacturer's Data Reports to be attached Weldin erformed in accordance with FPL Weld Control Manual and site rocedures.
uali t Grou B.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp Certificate of Authori ion o, N/A N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by**of hav inspected the components described in this Owner's Report during the period C to go , and state that to the best of my knowledge and belief, the Owner has performed examinati ns an taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Inspect s Signature Commissions Factor Mutual 4 56 N National Board, State, Province, and Endorsements Date (12I82j**Ark@right Mutual Znsurance Company Page 3 of 3 FORM NISe2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power S Li ht Name e P.O.Box 529100 Miami FL 33152 Ad dress plant Turke Point Name P.O.Box 3088 Florida Cit FL 33034 Address Date 10 9 87 Sheer 9 of Unit-388 PCM: 86-009 P.S.86-181 Repair Oreanlzatlan P.O.No., Job Na., etc.3.Work perfarmed by Bechtel Construction Name Type Code Symbol Stamp Authorization No, Expiration Date P.O.Box 3218 Florida Cit FL Address 4.Identification of System Auxi liar Feedwater Turbine<Steam Supply System (Ol Aoofleeefe Sdhlee Of SeeliOO Xf Ufif lead far Reoalreer Reofaeereeefa fPJIQ Elf SSS'rfRr ffSRSPS 7999 6, identification of Components Repaired or Replaced and Replacement Components Nanle af Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASMB Cade Stamped{Yes or No)Gate Valve Globe Valve Gate Valve Globe Valve Steam Supply Pi in N/A N A N A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A tag no 4-1404 tag no 4-1404 tag no 4-1405 tag no 4-1405 N/A N/A N/A N/A 1987 Replaced Replace-ment Replaced Replace-ment Replace-ment No No No No No 7.Description of Work COntinued frOm Sheet 1 Of 2 with 4" i in where re uired to accomodate installation of re lacement valves.New valve tag numb'ers 10-4-375, 376 and 377 were added immediatel u stream of valves 4-1403,4-1404 and 4-1405 in the AFN steam supply line.
Page 1 of'FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Florida Power 8 Light Name P.O.Box'29100, Miami, FL 33152 Address 2.plant Turkey Point Name P.O.Box 3088, Florida City, FL 33034 Address 3 yrork performed by BeChtel COnStruCtiOn, Zno~Name P.O.Box 3218 Florida City, FL 33034 Address Date 1 87 Sheet~pt Unit NCR-C-552-87 CWO: Dl-2081 PCM-N/A Repair Organization P.O.No., Job No., etc.Type Code Symbol Stamp Authorization No.N/A Expiration Date N A 4.Identification of System V ssel Gas Vent S stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 r Edi ti on, Wi nter 1981 Addenda 6.Identification of Components Repaired or Replaced snd Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASMF Code Stamped (Yes or No)Reactor res-sure Vessel BOW 610-0116 N-161 N/A 1970 Repair Yes 7.Descriptionofy(ork Added weld metal to existing undersized veld on the Reactor Head Gas Vent piping.B.Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure Q Other Q Pressure psi Test Temp.oF N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (I)s(ze is 8$in.x 1 t in., (2)informa-tion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered snd the number of sheets is recorded at the top o'.this form.This Form (E00030)may be obtained from the Order Dept., ASME, 345 E.47th St., New York, N.Y.10017 Page 2 of'FORM NIS.2 (Back)R,mk, Examinations erformed b FPL Construe'Applicable Manufacturer's oats Reports to be attached Veldin in accordance with FpL Veld Control Manual and site procedures..
0 alit Grou A.CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this conforms to the rules of the ASME Code.Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.Signed~7.0 er or w er's Oesl N/A Expiration Date/403.CITY.Ac<, , Title N/A fl-~~, IB 87 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have ins ected the components described in this Owner's Report during the perio to , and state that to the best of my knowledge and belief, the Owner hss performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes sny warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in sny manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
inspect s Signature Commissions Factor Mutual 4956 N I National Board, State, Province, and Endorsements Date (12/82)**Arkvright Mutual Insurance Company Page 1 of'FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASMF Code Section XI Florida Power fg Light Name P.O.Box 529100, Miami, FL 33152 Address pate 12/3/87 ShBIt Of 1 1 2.plant Turkey Poi nt Unit Name P.S.87-228 P.O.Box 3088, Flori da Ci ty, FL 33034 ftf r D1-1967 PCM: 86-211 Address 3+fork performed by BeChtel COnStruCtiOn, InC.Name P.O.Box 3218 Florida City, FL 33034 Address Repair Orrranizatlon P.O.NoJob No., atc.Type Code Symbol Stamp Authorization No.N/A Expiration Oats N A 4.Identification of system Intake Coolin Vater S stem ib)Applicable Edition of Section XI Utilized for Repairs or Replacements 19 80 I Zdi ti on a Vi nter 1981 Addenda 6, Identification of Components Repaired or Replaced snd Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped IYes or No)ICh'oafer Check Valve I'Cftr Vafer Check Valve N/A N/A W6729 N A N A tag no.4-50-321 tag no.4-50-321 N A N A Re laced Replace-ment No 7.Oescriptlonoftrvork Removal and re lacement of the ICY Pum B dischar e check valve and ad joi ni ng piping.6, Tests Conducted:
Hydrostatic Q Pneumatic Q Nominal Operating Pressure@-Other@Pressure 17 pal Test Temp.~Qj'F System Inservice Test NOTE: Supplemental sheets in form of Ilats, sketches, or drawings may be used, provided I1)size ls BS in.x 11 In., I2)informa-tion in items 1 through 6 on this report ls included on each sheet, and I3)each sheet h numbered and the number of sheets ia recorded at the top o." this form.This Form IE00030)may be obtained from the Order Oept., ASME, 345 E.47th StNew York, N.Y.10017 Page 2 of'FORM NIS-2{Backl 9.Remarks Examinations erformed h PPL Constru'o Applicable Manufacturer's Data Reports to be attached Quality Group C.CERTIFICATE OF COMPLIANCE ASME Code,Section XI.repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Owne or wneVs 0 I ee.Title N/A Expiration Date/~3$<T.~~~<.N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by*of have inspected the components described~ca in this Owner's Report during the period , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.By signing this cenificate neither the Inspector nor his employer makes any warranty.expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for sny personal injury or property damage or a loss of any kind arising from or connected with this inspectio Inspec s Signature Commissions Factor Mutual 4956 N National Board, State, Province, and Endorsements Date 19'I2/82)*x'Arkvright Mutual Insurance Company Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl 1.Owner FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 e 2 24 89 Sheet of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Unit N-89-0145 P.S.89-11 CK): Dl-3088 PCM: 89-097 Repair Orpatthothn P.O.HoJob Noetc.Type Code Symbol Stamp Authorization No Expiration Date kfdrees 4.Identification of System Reactor Coolant stem 3.Work Performed by C P.O.BOX 3218 FLORIDA CllY FL 33034 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Compononts Name of Component Nome of Manufacturer Manufacturer Serial No.National Board No.Other Identllic ation Repaired, Repioced, or Repiocemant N/A N/A N/A 8067-H-717A-01 1989 Replacement No 7 Description of'Work Ms~1 M~f ied design condition.
rt in order to return stem to ori inal 8.Tests Conduoted:
Hsrdrostatla Pneumatta Nomtnat Operating Pressure Other N/A Pressure psi Test Temp.ree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each shoot, and (3)oach sheot 1st liurnbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personneL Pyplbab4 Manufocbrrer's Data Reports to be attoche4 A Weldin rformed in accordance with the FP&L Weld Control Manual and site rocedures Quality Group'A'ERTIRCATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Expiration Date/%4~Jira 6~m.rQ.wner wner's Designee, TItle CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of have inspected the components described in this Owner's Report during the period/to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable ln any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Factoty Mutual System Commissions 4956 I Natfcrnot Sam4 State,~onrt Enclorsernents Date Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Plat TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Date 2 Sheet of Unit 4 CNO: Dl-3088 Raper Orgontsoaon P.a.NoJob No..oto.N-89-0130 Type Code Symbol Stamp Authorization No Expiration Date U I C 3.Work Performed by P.O.BOX 3218 FLORIDA CflY FL 33034 N A 4.Identification of System//(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Support Name of Manufacturer N/A Manufacturer Serial No.N/A Natfanal Board No.N/A SR-445 Repaired, Replaced, or Replacement N/A Replacement ASME Code Stamped (Yes or No 7.Description of Work rt SR-445 to rovide ro i clearances and re lace'o 1 installed welds.8.Tests Conducted:
Ht/drostotlc Pneumatic Momtnct Operctlng Pressure Other N/A Pressure psi Test Temp.gree's F" NOTE: Supplemental sheets ln form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 ln, X 11 in(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL ConstrucUon Quality Control personnel.
Applicable ManufoctLrrer'e Data Reports to be attoche4 Weldin rformed in accordance with the FP&L Weld Control Manual and site rocedures.
Quali Gro'B'ERTIFICATE OF COMPUANCE We certify that the statements made In the report are correct and this P~conforms to the rules of the ASME Code,Section XI..irepa r or rep acemen Type Code Symbol Stamp N/A Certificate of AuthorizaUon No.ExpiraUon Date N A Signed Owner Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspocted the components described In this Owner's Report during the poriod.to/and state that to the best of y knowledge and belief, the Owner has performed examlnaUons and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correcUve measuros described ln this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecUon.
Date C 19~F Factory Mutual System Commissions 4956 N I Naaonat BoanL State, prwlnce, encl Endcieemente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant~TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Date 3-3-89 Sheet 1 of 1 Unit 4 CWO: Dl-3088 PCM: N A N-89-0147 N-89-0173 Rapair orpanhatioe p.o.Ho., A4 Ho etc..Work Performed by N U TIO C Type Code Symbol Stamp'uthorizotion No P.O.BOX 3218 FLORIDA CITY FL 33034 Expiration Date N A Addrees 4.klentification of System~~ca olume and Control Char in S stem'/...'/(b)Applicable Edition of Section XI Utilized for Repairs or Rep'lacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other IdentIIIcatlon Yoar Built Repaired, Replaced, or Replacement ASME Code Stamped (Yoo or No Pipe N/A N/A N/A N/A N/A N/A WR-36 N/A N/A Repaired No Repaired No Support N/A N/A N/A 4-VCH-17 N/A Replacement No 7.Description of Work Removed cracked and undercut welds on su rt SR-36.Prior to rewe].ding support to pipe, repaired undercut on.pipe wall by grinding.Replaced miss-ing eye rod, turnbuckle and locknut on support 4-VCH-17.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure psl Test Temp.egree's F NOTE: Supplemental sheets in form of lists, sketches, ar drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)Information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Bock)Pago 2 of 2 9 Remarks Examlnatlons performed by FPL Construction Quality Control personneL Qtp5cabie Manufacturer'e Data Reporte to be attached All welding perforated in accordance with the FPaL Weld Control Man'ual and site rocedures.
Quali Grou rA'ERTlRCATE OF COMPUANCE We certify that the statements made ln the report are correct and this Rerrair/Re
~acementconforms to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Prz83 ar z jU Exp'Iration Date Own r Owner's Designee, Title CERTlRCATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected tho components described ln this Owner's Report during the period to cAn Z 9 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordanco with the requirements of ASME Code, Section Xl..By signing this certificate neither the Inspector nor his employer makes-any warranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore,'either the Inspector nor his employer shall be liable ln any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecUon.
Srtrnottrra Date~/3 19'actory Mutual System Commissions 49S6 N I Nasanal Boord, Stote, rrovtnce, ond Endoreernente
~5 5~0~~~~~~~'~~~)~I~~~~~~~I~~I~~~~~~~~g gy t~~~~~~~I~~~~~~~~~~~~~~~~~~~~~~~~~0~'~~~'~~~~~~'~~~~~~'~~~~~~~~~~~~~~I~~~~'~~~~~~~~~~~'~I~~I~~~'~~~~\~~~~~~~~~~~~~~~~~~~~I~Ii~R~R E~R E~R~~~~~EO~~.~.s~LO.~'I I OL~~~~~~~~~~~'~~~~~'~~~;~~~~~I;~~~~~~~~~~~~~~~~~~~~~~~'~~~~'~~~~'~~'~~~
FORM NIS-2 (Back)Examinations performed by FPL Construction Quality Control personnel, Ppplkcble Monufochrer'I Data Repute to N attached Quality Group"A".CERTIFlCATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair or rep acemen conforms Type Code Symbol Stamp N/A N A Expiration Date Owner or Owner's Designee, Title Certificate of Authorization No.SJgnad 6/W+U Payne<:rear
'.J s~ae s<Date N A 3 Zg, 1gQ CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Provinco of Dade Coun Rorida and employed by Arkw ht Mutual Insurance Com n of Norwood MA.have inspected tho components described ln this Owner's Report during tho poriod 2Z j'o 2s-, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 N I Natkerd Baard State.Provrccer.
and Endoreemerrts I Stgnahrs 19~%
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owns~FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 e 789 Sheet 1 of Unit 4 CNO: Dl-3088 N-89-0037 PCM: N Repair Organhathn P.O.Nore Job Noeta.N A 3.Work Performed by C 0 Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA CAY FL 33034 Expiration Date 4.Identification of System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Nome of Manufocturer Manufacturer Sethl No.Natfonal Board No.Repaired, Reploced.or Replacement ASME Code Stamped (Yee or No Support N/A N/A N/A 4~TH-14 N/A Replacement No 7.Description of Work Re laced bent 3 4" diameter e r 8.Tests Conducted:
Mydrostagc Pneumatfc Momtnal Operating Pressure Other N/A Pressure psl Test Temp.egree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 ln.X 11 ines (2)information in items 1 through 6 on this report Is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Rema~ExamlnaUons performed by FPL Construction Quality Control personnel.
Applicobie Monufocbrrer's Data Reports to be attached Quali Grou'C'o identifiable cause of failure was observed.CERTIRCATE OF COMPLIANCE Ne certify that the statements made in the report are correct and this conforms Replaceaant to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date N A 0 ner or ner's Designee, TiUe 8-w>CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NaUonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwrl ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period dc to'D-.-P and state that to the best of my knowledge and belief, the Owner has performed examinaUons and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinaUons and correcUve measures described In this Owners Report Futhermore, neither the Inspector nor his employer shall be liable In any manner for any personal Inlury or property damage or a loss of any kind arising from or connected with this inspection.
r Factory Mutual System Commissions 4956 I$gooture Noscnot Board.State,~ond Endcrsernents oate~.-7 r9~
~~Qh 0 Qi Q 0~~~'~~~~'.~~~~~t~I I~~~~~~~~~~~~~~I~~~~~~L~~~~~~~~~~~~~~I~~o I~~~~0~~'~~~~~~~~~~~~~~~0~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I~~~~~~~~~~~~~~~~0~.~~~~~~~~~e~I~~~~I~~0~~~~~~~~~~~~~.~.~I.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'~~~~~4~~~~~
FORM NIS-2 (Back)Page 2 of 2 9 Remari Examinations performed by FPL Construction Quality Control personnel.
Pyp5coble Monufoctrrrer'e Data Reports to be attached Welding perf'ormed in accordance with the FP&L Weld Control Manual and site procedures.
Qualit Grou'A'upport is located on the Pressurizer Spray Line.CERTIRCATE OF COMPLIANCE We cerUfy that the statements made in the report are correct and this to the rules of the ASME Code, Section XL Replacement repa r or rep ocemen Type Code Symbol Stamp N/A CerVficate of Authorization No.Expiration Date N A Signed ner or ner's Designee, TIVe V~19)CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NaVonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period to , 4o and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shatl be liable ln any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
e ISnature~e+~/~sPF Factory Mutual System Commissions 4956 N I NaBonat Board.State, Pravbce.and Endoreeinente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENlTS As Required by tha Provisions of tha ASME Code SacUon Xl O n r FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Date 4 Sheet 1 of 1 Unit 4 PCM: 89-140 N-P fbp4r Onictt~p.a Nom No~3.Work Performed by N Type Code Symbol Stamp AuthorizaUon No P.O.BOX 3218 FLORID CIIY 33034 Expiration Date N A 4, IdentificaUon of System Main Feedwater-Pass line'B'team Generator (b)Applicable Edition of Section XI UUIIzed for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Sorkil No.Repaired, Replaced, or Replacement N/A N/A N/A 4-FWH-3 N/A Replaceme No 7.DescnpUon of Work Re laced s rin can, and i cl bolts.8.Tests t'mnrtuoted:
tttrdrostotta pneumatta Nomlnat Operattng pressure Other N/A Pressure psl Test Temp.rae's F NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 In(2)information in items 1 through 6 on this report ls included on each sheet, and (3)each sheet ls numbered and the number of sheets ls recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Remarks ExaminaUons performod by FPL Construction Quality Control personneL Applkobie Mewfoctww'e Data Reports to be attached Quality Group'B'.CERIIFlCATE OF COMPUANCE We certify that the statements made'fn the.report are correct and thfe conforms Replacement to tho rules of the ASME Code, SecUon Xf.repa r or rep acemen Type Code Symbol Stamp N/A Certificate of AuthorhaUon No.N A Expiration Date N A Signed 4./-.it~gr~~gn'.Owne r Owner's Designee, Title CERIIRCAIE OF INSERVICE INSPECllON I, tho undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Provfnco of Arkwrl ht Mutual Insurance Com Dade Coun Rorlda of and employed by have inspocted the components described fn this Owner's Report during the period to Can 2 7 and state that to the best of my knowledge and belief,)the Owner has performed examlnaUons and taken correcUve measures descrfbod in this Owner's Report In accordance with the requirements of ASME Code, SecUon XI.By signing this cerUffcate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In thfe Owners Report.Futhermore, neither the Inspector nor his employor shall be liable ln any mannor for any personal fnjuiy or property damage or a lose of any kind arising from or connected with thfs fnspectlon.
SISnabire)9~8~~Commissions Factory Mutual System 956 I Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Date 4-10-89 Sheet 1 of 1 Unit 4 CWO: A-558 PCM: 88-263 RapQr Organhmtke P.a.No., Job No., otc.Type Code Symbol Stamp Authorization No Expiration Date Address 4.Identification of System Auxillar Coolin 3.Work Performed by C I P.O.BOX 3218 FLORIDA CITY FL 33034 N A 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial Na.National Board Na.Year Built Repaired, Replaced, or Replacement Piping Support N/A N/A N/A N/A N/A N/A N/A H-01 1989 Replace-ment Replace-ment No 7.Description of Work Re laced i in and added ne Loo Ref uelin Water Purif ication Di e Line.8.Tests Conducted:
~Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp.t ree's F NOTE;Supplemental sheets fn form of lists, sketches, or drawings may be used, provided (1)size Is 8 1/2 In.X 11 in(2)information In items 1 through 6 on this report is included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Remari Examinations performed by FPL Construction Quality Control personnel.
Pppscobie Manufacturer'e Data Reporte to be attached All Manual and site rocedures.
Qualit Grou'C'.CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this~conforms to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date N A Si ed~~Aim P4rc.Owner r Owner's Designee, TrUe CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual insurance Com n of have inspected the components described fn this Owner's Report durIng the period to 2/rP and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the examlnaUons and corrective measures described ln this Owners Report.Futhermore, neither the Inspector nor his empktyer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
Date~18~Factory Mutual System Commissions 4956 N I NDBonat Board, State, rrotttnce, ond Endcreeinente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Date 4-10-89 Sheet of 1 1 Unit 4 CWO: Dl-3088 PCM: N A N-89-0240 P Rttpalr Orgdgnhauon P.O.Ho., Job HoNtc.3.Work Performed by U N Type Code Symbol Stamp Authorization No P.O.BOX 321 8 FLORIDA CITY FL 33034 Expiration Date N A hddntes P 4.Identification of System Corn onent Coolin Mater/-'/55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Cam panent Support Support Name of Manufacturer N/A N/A Manufacturer Serial No.N/A N/A National Board No, N/A 4-CCH-30 N/A 4-CCH-31 Year Built N/A N/A Repaired.Replaced.or Replacement Replace-ment Replace-ment ASQE Code Stamped (fee or No No No 7.Description of Work Replaced pipe straps.8.Tests Conducted:
Hydrostatte Pneumatic Nomtnal Operating Pressure Other N/A Pressure psi Test Temp.gree's F NOTE: Supplemental sheets in form of lists, sketches, or drawfngs may be used, provided (1)size is 8 1/2 ln.X 11 in(2)information ln items 1 through 6 on this report is Included on each sheet, and (3)each sheet is numbered and the number of sheets ls recorded at the top of this form.
FORM Nls-2 (Back)Page 2 of 2 9 Remarks Examinations Performed by FPL Construction Quality Control Personnel.
Applicable MonufocbNw'e Data Reporte to be ottocheil Quality Group'C'.CERTIRCATE OF COMPUANCE We certify that the statements made ln the report are correct and this conforms Replacement to the rules of the ASME Code,Section XI.repa r or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Dato Signed<~>4~Owner o OwneCs Designee, Title.19Q CERTIRCATE OF INSERVIC.E INSPECllON I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Provinco of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described In this Owner's Report during the period~S P/F~and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correcUve measures described ln this Owner's Report in accordance with the requirements of ASME Code, SocUon XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and correcUve measures described in this Ownors Report.Futhermoro, neither the inspector nor his employer shall bo liable ln any mannor for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.
e Signotune Date 8/19 WF Factory Mutual System Commissions 4956 N I Natkinat Booid, State, Prevboe, on4&doieemente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Cocte/Section XI Ownei FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CflY FL 33034 Date 4 Sheet~of Unit 4 CWO: D1-2159 NCR-C-0736-87 Reptglr Orgtgnhtgtfon p.a.No., Job No..etc.0 C Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA flY 33034 Expiration Date A hddrees Identification of System Steam Generator Blow Down'C'/-~'/55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Mome of Manufacturer Manufacturer Serial No.Other IdentIIIcatlon Repaired, Replaced.or Replacement Support N/A N/A N/A H-422-01 N/A ep ace-ment No 7 D ti f W rk Rep 1 aced the transition tube on Support H-4 2 2-0 1 (snubber 7.Description of Work 4-%079)in order to obtain acceptable
'L'iaension.
8.Tests Conducted:
Ht/drostatto Pneumattc Nomtnal Operating Pressure Other N/A Pressure psl Test Temp.egree's F NOTE: Supplemental sheets In form of fists, sketches, or drawings may be used, provided (1)size Is 8 1/2 in.X 11 in., (2)InformaUon ln items 1 through 6 on this report ls included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
~~~4~'~~~~~~~~'~~~~~~~0~~~~~4'~~~~~~~~~~~4~~~~~~'~~~~~~I~~a~~~~~~~~~~~~~~~~~~~~~~~~~+'~~~~~~~~~'~~~'~'~~~~~~~~~~~'~~~'~~~~~~;~~;~~'~~'~~~'~~t~~~~'~~~'~~'~~S~~~'~~~~0.~~~~~'~~~~~~~'~~~~~~~~~~'~~~'~~~~~~~~
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c UGHT P.O.BOX 529100, MIAMI FL 33152 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Date Sheet of Unit 4 CNO: Dl-2159 PCM: 88-424 NCRM-0736-87 3.Work Performed by C 0 0 P..BOX 3218 FLORIDA CllY 3303 4.Identification of System Repair Orgonhathn p.a.No., Job No etc.Type Cods Symbol Stamp Authorization No Expiration Date stem (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer N/A Manufacturer Serial No.N/A N/A Other identification PS-128 N/A Repaired.Replaced, or Repfccement Replace-ment ASME Code Stamped tYee or No 7.Description of Work Added a shim to s rt PS-128 in order to obtain acce table'L'imension.
for mechanical shock arrestor (snubber tag I 4-1029)on the RID systan.8.Teats Conducted:
Hrdrostctlo Pneumotlc Nomtnot Operottng Pressure Other Pressure psl Test Temp.egree's F t NOTE: Supplemental sheets ln form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 In(2)information In'tems 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets fs recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personneL hpp/tcabte Mantrfacturer'e Data Reports to be attached All welding was performed in accordance with the FPaL Weld Control Manual and site rocedures.
i Gro'A'.CERTIFICATE OF COMPLIANCE
'*'t to the rules of the ASME Code, SecUon XL conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A ExpiraUon Date N A Signed'~SP~~~IMe Own or Owner's Designee, Title CERllRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board-of Boiler and Pressure Vessel Inspectors and the State or Province of Arkw ht Mutual insurance Com n Dade Coun Rorida of and employed by have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, SecUon XI.By signing this cerUficate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described ln th'ls Owners Report.Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspecUon.
Factory Mutual System Commissions 49 I tnepec~Ha6onat Board, State, Pttvttnce, and Eitdcreernente Date/+f t9~8 Page 1 of 2 FORM NIS-2 ONNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 Date 4 12 89 Sheet of 1 1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CfiY FL 33034 Unit CÃ0: Dl-3088 N-89-0029 Rspolr Orgonlzatfon p.a.HOJob Hooto.N A 3.Work Performed by Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA CITY 33034 Expiration Date 4, Identjficatlon of System (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda S.Identification of Components Repaired or Replaced and Replacement Components Main Steam LOOP SC Main Steam SAs Nome of Manufacturer Unknawn Manufacturer Serial No.Unknawn Unknawn N/A N/A Repofred.Replaced, or Replacement 1968 Repaired 1968 Repaired ASME Code Stomped (Yee or No Yes Yes 7 Descri bon of Work RePamed base metal linear indications by~~wiW light 1JKL1D~S.Tests Oonduoted:
Hydrostatto Pnsumatla Nomtnat Operadnd Pressure Other N/A Pressure psi Test Temp.gree's F NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 ln.X 11 ln., (2)information in items 1 through 8 on this report is included on each sheet, and (3)each sheet ls numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)9 Ramari Examinations performed by FPL Construction Quality Control personnel.
Appkxkdo uonofoctunc'o Data Ropes to bo ouochod Quali Gro'B'he indications were evaluated to be not service related.*Original Manufacture Documentation is not available.
CERTIRCATE OF COMPLIANCE We certify that tho statements mode in tha roport are corroct and this to the rules of the ASME Code, SecUon XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.ExpiraUon Date Signed Owner r Owner's Designee, Title Date J~, 19@CERllFICATE OF IHSERVICE INSPECTlON I, the undersigned, holding a valid commission issued by tha National Board of Boiler and Pressure Vessel Inspoctors and tha State or Province of Dodo Coun Rorida and employed by Arkwri ht Mutual insurance Com of Norwood MA.have inspected the components describod in this Owner's Report during the perio to P and state that to the best of my knowledge and belief, tho Owner has performed examinations and taken corrective measures described in this OwnaCs Report in accordance with the requirements of ASME Code, Section Xi.By signing this certificate noither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correcUve moasures described in this Owners Report.Futhermore, neither tha Inspector nor his omployer shall be liable ln any manner for any personal Injury or property domoge or a loss of any kind arising from or connected with this Inspection.
Factory Mutual System Commissions 495S Notfonrd 8oord, Stab.~ond Endooornonto 19 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Or FLORIDA POWER dc LIGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Date 4 17 89 Sheet 1 of 1 Unit 4&V: Dl-3088 N-89-0281 Repair Orgonhdgeon p.a No., A4 No., etc.Type Code Symbol Stamp Authorization No Expiration Date 3.Work Performed by CHT I C P.O.BOX 3218 FLORIDA C1IY FL 33034 N A Address 4.Identification of System~en Contains'e/u/*"-*'"".,/.../55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name af Component Nome of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Raptacdtment ASME Code Stamped (Yea or No Support Support N/A N/A N/A N/A N/A 8096-H-401-23 8096-H-401-24 N/A Replacement N/A Replacement No No Support Support Support Support Support N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 8096-H-401-34 N/A 8096-H-401-35 N/A 8096-H-401-25 N/A 8096-H-401-32 8096-H-401-33 N/A Replacetrent N/A Replacement N/A Replacement N/A Replacement N/A Replacement No No No No 7 Description of Work RePlaced rod end on su rt 8096-H-401-23.
Modified su rt 8096-H-401-33 and replaced pipe strap.Rep~laced i stra on remainin S.Tests Conduoted:
Ht/drostotto Pneumotlo Nomtnot Operottng Pressure Other N/A Pressure psi Test Temp.egree's f NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 ln.X 11 in., (2)information in items 1 through 6 on this report Is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back}Page 2 of"'6 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
Apptkobie Manufacturer'e Dote Reporte to be attached All wel rformed in accordance with the FPIi'L Weld Control Manual and site procedures.
Quality Group'B'ERTIFICATE OF COMPUANCE Vfe certify that the statements made in the report are correct and this Re lac~t conforms to the rules of the ASME Code, SecUon XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No, N A Expiration Date Signed wner A4;0/7~lY&vf cg, g-~c,grg wner's Designee, Title CERTIRCATE OF INSERVlCE INSPECT10N I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Florida and employed by Arkwrl ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the periad M.Cu lP+r to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report, in accordance with the requirements of ASME Code,Section XI, By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4958 N I Notional Board, State,~ond Endoieeinente
~6+'/ig~F Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl 0FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Date 4-18-89 Sheet 1 of 1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CWO: Dl-3093 Dl-3109 PCM: 88-574 Rdtpclr Orgdtnixatbn p.a.No..Job No etc.Type Code Symbol Stamp Authorizotion No Expiration Date 3.Work Performed by HT ON U Name P.O.BOX 3218 FLORIDA CITY FL 33034 hddrooe 4.Identification of System Intake Coolin Water'/-"/(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component ICW Piping, 3A ICW Piping, 3B TPCW Piping, 3A TPCW Piping, 3B Name of Manufacturer N/A N/A N/A N/A Manufacturer Serfal No.N/A N/A N/A N/A NaUonal Board No.N/A N/A N/A N/A N/A N/A N/A N/A Year Built N/A N/A N/A N/A Repaired, Repfoced, or RepIacement Replacement Replacement Replacement Replacement ASME Code Stamped (Yea or No No No No 7.Description of Work Pi in disassembled and reassembled to nnit re lacement o f defective flanges.Pipe supports were ramved, as required to acccaedate flan e replacement.
Reinstalled to original configuration.
d.Teats Conducted:
Ht/drostatla Pnsumatla Nominal Operating Pressure Othor X Pressure~'~g psl Test Temp.agree's F System Leakage Test NOTE: Supplemental sheets ln form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 ln.X 11 ines (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Poge 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnol.
hppthobis Lkuwfoctvrsi's Data Reports to bs attached Qualit Grou'C'echanical
'pints onl.No weldin rformed.CERTIFICATE OF COMPUANCE We certify that tho statements made in the report are correct and this conforms Replacerrent to the rules of the ASME Code,Section XI.repa r or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Dato N A Signed Nrc;wner or er's Designee, Title CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period to/Z and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, SecUon XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinaUons and correcUve measures described ln this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this InspocUon.
tnsp actor'ature 19 Factory Mutual System Commissions 4956 N I Hoeonaf Boord, Stats.~and Endorssmsnts Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 FLORIDA POWER 8c UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Date 4-19-89 Sheet 1 of 1 Unit 4 PCK: 89-027 RM-P.S.89-050 89-294 3.Work Performed by I C P.O.BOX 3218 FLORIDA CllY FL 33034 Repair organhatke p.o.NoJob Ho Type Code Symbol Stamp Authorization No Expiration Date Address 4, identification of System Intake Cool'ater 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Manufacturer Manufacturer Serial No.National Board No.Other IdentNcatian Repaired.Replaced, or Replacement ASME Code Stamped (Yes or No ICW Piping, 4B N/A N/A N/A N/A N/A Replacement No 7.Description of Work Pi'isassembled and reassembled to't re lacenent of defective flan es.Reinstalled to ori inal confi ation.8, Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other~X System Pressure~~~psi Test Temp.N/A agree's F t (25 psig)NOTE: Supplemental sheets ln form of lists, sketches, or drawings may be used, provkfed (1)size ls 8 1/2 ln.X 11 in., (2)information in items 1 through 6 on this report ls included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Poge 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.
App5coble Lkeafochrw'e Data Reporte to be attached Quality Grou'C'.Mechanical
'o'CERTIFlCATE OF COMPUANCE We certify that the statements made In tho report are correct and this to the rules of the ASME Code,Section XI.reparr or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Dato Signed ner or ner's Designee, Titlo CERTIFICATE OF INSERVICE INSPECTTON I, the undersigned, holding a valid commission issued by the NaUonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described In this Owner's Report during the poriod to/and state that to the best of my knowledge and boilef, the Owner has performed examinations and taken correcUve measures described in this Owner's Report in accordance with the requirements of ASME Code, SecUon XI.By sign'Ing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concern'Ing the examinations and correcUvo measures described In this Owners Report Futhermoro, neither the inspector nor his employer shall bo IIabie in any manner for any personal inJury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 N Na5onor Boml, State, Provtace, ond Endo~to Date'Y Ac 19~X Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0+nor FLORIDA POWER dc LIGHT P.O.BOX 529100, MIAMI FL 33152 Ald ress p(ant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Date Sheet l of Unit 4 ARM-439-88 D-PCM: 8-Roparr Orpanlzatfon P.a.Ho..Job No..eto.3.Work Performed by C C I Type Code Symbol Stamp Authorizotion No P.O.BOX 3218 FLORIDA CITY FL 33034 Expiration Date N A Afdtgpes 4.Identification of System Turbine Plant nent Coolin Water'/',/(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other identification Year Built Repaired.Replaced, or Replacement ASME Code Stamped (Yee or No TKW'A'iping N/A N/A N/A N/A N/A Repaired No t TPCW EB'iping N/A N/A N/A N/A N/A Repaired No 7 De ri t on of Work Repa>red corroded instrurltent taPPings bY drilling/taPPing to lar er NPS and installin reducer bushin s.8.Tests Conducted:
~System Leakage Hydrostatic Pneumatic Nominal Operating Pressure Other QX 0 4000-7300 GPM.Pressure/psi Test Temp.egr'ee s F NOTE: Supplemental sheets ln form ol Ilats.sketches, or drawings may be used, provided (tl else Is 8 t//2 ln.X 11 in(2)information in items 1,through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.
Applicable Manrrfocturer'e Doto Reports to be attached lit GrOu rCr.CERTIRCATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.Re conforms repa r or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.ExpiraUon Date Signed Ago S j~+6.W Dat Owner r wner's Designee, Title , 19/.CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NaUonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Fiorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this OwneCs Report during the period to P and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correcUve measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examlnaUons and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his emphyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
co re S'rg~Factory Mutual System Commissions 4956 N I NaSonrd Boordr Rota,~and&doreernento
~~~QO 0 0~0~0 0 0 p~0 0$$~~~~',~~~~I~~i II~~~~~I~~I~I~~~I~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I~~~~~'~~~~~~~~~'~~~~~~'~~~~~~~~~~~'I~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~I~gg..a a~R P H P R~R I'~~~~~~II~~~~~~'i'~I~.~~~~~I I~~~','~~~~~'~~~~~~~~~~~~~~~~~~'~~~~'~~~~~~'~~~~
FORM NIS-Z (Back)Poge 2 of 2 Examinations performed by FPL ConstrucUon Quality Control personnel.
~tcobte Mawfoctww'e Data Reports to be attache4 All welding performed in accordance with FP6L Welding Control Mnual and site procedures.
Quality Group"B".CERTIRCATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code, Section N.repaIr or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed Sim~&~.p~~Ow er or 0 r's Designee, Title CERTTRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel inspectors and the State or Province of Arkwri ht Mutual insurance Com Dade Coun Rorida of and employed by have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section N.By signing this certificate neither the Inspector nor hb employer makes any warranty, expressed or implied, concerning the examinaUons and correcUve measures described in this Owners Report.Futhermore, neither the Inspector nor hfs employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Factory Mutual System Commissions 4956 N I Nottonol Boon/, State,~ond Endoreomonta Date 8~X 19~$
Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 P(ant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by 0 P.O.BOX 3218 FLORIDA CITY FL 33034 Date 5-17-89 ghent~of Unit 4 CWO: D-P: N A N--7 Rdhpoir Oraoftlmtbn P.O.No Job No gftc.Type Code Symbol Stamp AuthorizatIon No Expiration Date hddreee 4.Identification of System Chemical and Volume Control 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Name of Manufacturer Manufacturer Serfal No.National Board No.Repaired, Reploced,'r Replacement Pipe Su ort N/A N/A N/A 4-VCH-19 1989 Replacement No Pipe Support N/A N/A N/A SR-M-781A N/A Replacement No 7.Description of Work Re laced su ort SR-M-781A and modified su ort 4-VCH-19.8.Tests Conducted:
Htrdrostcgo Pneumotlc Nomlnol Opercttng Pressure Other Pressure psl Test Temp.ree's F NOTE: Supplemental sheets in form of lists, sketches, or drawfngs may be used, provided (1)size is 8 1/2 ln, X 11 in(2)information fn items 1 through 8 on this report is included on each sheet, and (3)each sheet b numbered and the number of sheets ls recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel~Ppplkobfe Monttfocturer'e Data Reports to bo attaches All welding performed in accordance with the FP&L Weld Control Manual and site rocedures.
ualit Grou'B'.CERTIRCATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.Re lacement conforms repa r or rep acemen Typo Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Owner/gA-.Si~~C-c.Owner's Designee, Title CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comm'lesion issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Pr vince of Dode Coun Rorida and employed by Arkwri ht Mutual Insurance Com of Norwood MA.have inspected the components described ln this Owner's Report during the period~4r/XEP~and state that to the best of my knowledge and belief.the Owner has performed examinations and taken corrective measures described ln this Owner's Report in accordance with the requirements of ASME Code,Section XI.I By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any Idnd arising from or connected with this inspection.
e Signohtre Date e 19 Factory Mutual System Commissions 4956 I Nothnai Board, State, Prwbc>>, and Endoreernente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 Plant TURKEY POINT P.O.'OX 3088 FLORIDA CilY FL 33034 Date 5 17 89 Sheet 1 of Unit 4 CWO: D1-3088 N-89-334 Rapolr Organhcrthn P.O.No., Job Noetc.3, Work Performed by C U Tl C Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA CITY FL 33034 Expiration Date N A Ad draco 4.Identificotion of System Chemical and Volume Control S stem 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping Support Name of Manufacturer N/A Manufacturer SerIal No.N/A , National Board Na.N/A PS-8 N/A Repaired, Replaced, or Rapiacament Replacement ASIDE Code StampedlYea or No No Replaced tube steel on support PS-8.8.Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other 1 N/A Pressure psi Test Temp.egree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 fn(2)information in items 1 through 6 on this report Is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)Page 2 of 2 W ld Examinations performed by FPL Construction Quality Control personnel, hppticob4 MonHocturer'e Data Reporte to be attached site rocedures.
ualit Grou'B'.CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code, Section Xi.Re lacement conforms repair or rep acemen Type Code Symbol Stamp N/A CerUficate of AuthorizaUon No.Expiration Date Signed/~Pgd~5q-g ner or w er's Designee, Title)9E f CERllFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Florid and employed by Arkwri ht Mutual insurance Corn n of Norwood MA.have inspected the components described In this Owner's Report during the period e to l4/L 8~/and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI, By sign'ing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and correcUve measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspecUon.
Factory Mutual System Commissions 4956 N I Natknot Board, State.Prov@co, ond&doeaernente Date S Z 19~cP