ML17345B211

From kanterella
Jump to navigation Jump to search
Owners Data Rept for Inservice Insps
ML17345B211
Person / Time
Site: Turkey Point NextEra Energy icon.png
Issue date: 08/10/1983
From:
FLORIDA POWER & LIGHT CO.
To:
Shared Package
ML17345B210 List:
References
NUDOCS 8308180183
Download: ML17345B211 (40)


Text

FORM NIS-1 Oh'HERS'ATA REPORT FOR INSERVICE XNSPECTIONS As required by the Provisions of the ASME Code Rules PAGE 1

OF 26 Florida Power and Light Co.

9250 W. Flagler, Miami, Fla.

l. Owner (Name and address of Owner)

Turkey Point Nuclear Power Plant P.O.

Box 3088'LORIDA CITY'l 33034

2. Plant (Name and address of Plant)
3. Plant Unit 4

4.

Owner Certificate of Authorization (if required)

N/A

5. Commercial service date 7

SEPTEMBER 1973 6: National Board Number for Unit N/A

7. Components Inspected Component or Appurtenance Manufac tu'rer or Installer Manufacturer or Installe Serial No.

State or Province Number National Board Number RPV VESSEL RCS PIPING AUX SPRAY SIS PIPING RHR P IP ING BORON INJECTION STEAM GENERATOR STEAM GENERATOR STEAM GENERATOR B

6 W

BECHTEL BECHTEL BECHTEL BECHTEL BECHTEL WESTING HOU SE WESTINGHOUSE WES TINGHOU SE N

A'/A

'/A

'/A N/A N/A 16A-6341-1 16A-6341-2 16A-6341-3 N/A N/A

. N/A N/A N/A N/A N/A N A N/A N/A N/A N/A 772 774 776 FEEDWATER PIPING BECHTEL N/A

, MAIN STEAM B LOWDOWN BECHTEL BECHTEL N/A N/A N/A N/A N/A N/A Note: Supplemental sheets in form of lists, sketches, or drawings may be used provided (1) size is 8 1/2 in. x ll in.,

(2) information in items 1 through 6 on this data report is included on each

sheet, and (3) each sheet, is numbered'nd the number of sheets is recorded at the top-of*this form.

I 8308i80183 8308i2 PDR ADOCK 0500025i

,8 PDR

4

~

~

FORM NIS-1 (back)

PAGE 2

OF 26 8.Examination Dates 10-1-82 to 5-16-83

9. Inspection Interval from 6 2/3 YEARS to 10 YEARS
10. Abstract of Examination.

Include a list of examinations and a

statement concerning status of work required for current interval.

SEE ATTACHED SUPPLEMENT ll. Abstract of Conditions Noted.

SAME AS ITEM 10 ABOVE

12. Abstract of Corrective Measures Recommended and Taken.

SAME AS ITEM'0 ABOVE We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the ules o

the ASME Code,Section XI.

Date A. zW /P 19'igned

-8(i'e/Y ZveP d. By Owner Certificate of Authorization no. (if applicable)

Ã/A Expiration-date N/A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of DADE CTY., FL and employed by of

NORWOOD, MASS have inspected the components described in this Owners'ata Report during the period OCT 1982 to MAY 1983 and state that to the best of,my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners'ata Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer mak'es any warranty, expiessed or implied, concerning the examinations and corrective measures described in this Owners'ata Report.

Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Dat C

19 Z'Z Inspector" s Signature FACTORY MUTUAL SYSTEM Commissions COMM NOa4956 National Board, state, Province and No.

    • ARKWRIGHT BOSTON MFG'S MUTUAL INSURANCE COMPANY

SUPPLEMENTAL SHEET NIS-1 PAGE 3

OF 26

l. Owner: Florida Power

& Light Co.

9250 Nest Flagler Miami, Florida 33152

2. Plant:

TURKEY POINT P.O.

Box 3088 FLORIDA CITY, Florida 33034

3. Plant Unit 4

4.

Owner Certificate of Authorization

N/A
5. Commercial Service Date:

7 SEPTEMBER 1973

6. National Board Number for Unit: N/A 10.

REPORT NUMBER ORGANIZATION DESCRIPTION OF SERVICE CIG-PTP-83-001 17-4520 FPL SWRI INSERVICE INSPECTION VOLUME I THROUGH VOLUME 5 MECHANIZED EXAMINATION VOLUME I THROU GH VOLUME 3

N/A N/A N/A WESTINGHOU SE WESTINGHOU SE WESTING HOU SE EDDY CURRENT EXAMINATION OF STEAM GENERATORS BASELINE REACTOR VESSEL.INTERNAL REPORT RPV CLOSU RE HEAD MODIFICATIONS

Page 4 of 26 FORM NIS-2 OWNER'5 DATA REPORT OF REPAIRS OR REPLACEMENT As reqUired by the Provisions of ASME Code Section XI I. Q~ner Fl ori da Power 8t Light Co.

(Narne P.

0. 'Box 529100 Hiami, Florida 33152 Address Sheet

,of D'ate ~Mr /~~

2. Plant Turkey Poi'nt Name P.

0.

Box 3088 Fl ori da Cit Fl or ida.33034 Address Unit-3.

Work Performed by ation Job Number 12987 (Name)

Repair Organization P.O. No.

15740 Shady Grove Road G ithersb r H r land 20760 Address Reactor Coolant, Hain Steam, ii. Identification of System Feedwater and Blowdown Systems

. 5.

(a) Applicable Construction Code IH l9 pt Editien 57E Adde'nda ~lt A Code Cases ATP5T B31. T Editian P377 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements

- l9 ~7 Edition S78 Addenda, Code Cases N-308 1'.

Identification of Com onents Re aired or Re laced and Re lacement Com onents Name of Component Nat Bd.

No.

Mfr.

Name of Mfrs. Ser.

'I CRN No.

Other Identi-fication ear uilt

Replaced, or Replace-ment Stamped (Yes, No)

Repaired

'SME Code STH GEN STH GEN STH GEN blasting-ItA llesting-!

16A house

'.6341-2 Westing-'6A

'6341-3 772 774 776 A

1969 1969 1970 Replacement Yes Yes Yes

7. Description of %'ork Attachment 1

r gi

Page 5 of 26

'ORM NIS-2 (page 2)

3. Tests Conducted:

Hydrostatic

" Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp. "

F Applicable Hanufacturers Data Reports are attached (Applicable Manufacturer's Data Reports to be attached

  • Primary System 2335 psig 9 547 F; Secondary, System 1356 psig 9 70 F; Blowdown System 1675 psig 9 60oF Hajor modifications are covered by Steam Generator Repair Report Docket No. 50-250 and 50-251 CERTIFICATE OF COMPLIANCE To certify that the statements made in this report are correct and this replacement (Repair or Replacement conforms to Se n XI of the ME Code.

Signed,M~~~m

.. M/~Mi 7

~M M~

~ 7 l~s 19 st Owner or 0 er's Designee (Title (Date) s CERTIFICATE OF INSPECTION I, the Undersigned, holding a'alid commission issued by the National Board of Boiler Y

5<<

by of Norwood HA have inspected the re (Repair s or Replacement (s) )

described in this Report on

~, l9 <$ 3 and state that to the best of rriy knowledge and belief, this rep or replacement has been constructed in accordance with Section XI of the AShlE Code. By signing this certificate, neither the inspector nor his employer takes any warranty. expressed or implied, concerning the repair or replacement described in this Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Dade Cty.

Comm.

No.

4956 Des+/a>

di d3 W

Commissions Factor Mutual S stem inspector 5tate or Province, National Board)

    • ArkwrightBoston Hfg's Hutual Ins.

Co.

SHEET 6 of 26 NIS-2 DATA REPORT ATTACHMENT 1 l.

Owner:

2.

Plant:

3.

Work Performed by:

,4.

Identification of System:

Florida Power 5 Light Company P.

0.

Box 529100 Miami, Florida 33152 Turkey Point P.

0.

Box 3088

,Florida City, Florida 33034 Bechtel Power Corporation 15740 Shady Grove Road Gaithersburg, Maryland 20760 Reactor

Coolant, Main Steam, Feedwater and Blowdown Systems.

Date:

Unit:

4 Job No.

12987 7.

Description of Work:

The steam. generators wer'e repaired by the replacement of the lower assemblies

'excluding channel heads) identified as FSGT 2991; FSGT

2992, and FSGT 2993 and installation of new Feedwater Nozzle extensions.

Cutting and reinstallation of the Mainsteam and Feedwater piping.

Installation of a redesigned Blowdown System.

Miscellaneous tieins and reconnec-tions of existing systems to new or reworked systems (i.e., reactor vent, wet layup tieins to feedwater and blowdown systems, instrument sensing lines to the Steam Generator, Aux.

Feedwater System).

I'aQe 7 Df 76

'a I

F()Rhf N-2 NPT CERTIFICATI'. IIOLDERS'ATA REPORT FOR NVCLEA PART AND APPURTEh'A(eC~e;

's required by thc flrovision or ihc ASME C~c Rules.Section III. Div I

Correcte 2d f(

I.

( ~ ) Manufactured by (b) Manu(ectured (o(

Westinghouse Electric Corp.,

Ta(apa Division, Tampa, Florida.

(Hame and address ur Hpr ceecmcace Huldee)

Florida Power

& Light Company - Turkey Point Unit 4

(Home end address ur H Cecuncece Holder (ur completed nuclear cumpunenu 2.

Ident(Acat(on<<Cert(Acate Holder's Sehal No. o( Part Nae'I Bd. No.

None ra)

Consccucccd According to Dramring No.

Dramsing Prepared by WTD (b) Description o( P an lnspec..ced Tube Bundle ASS'ly 74**

S 76**

1484 (c)

Applicable ASME Code: Scccion III,Editson

~ Addenda date

~ Case No.

CI as s 3

R ks S team generator tube assembly fabr ica ted per ASIDE Code';

Sec cion III Class 1 Nuc 1 ea Vessel Component.

(()clef decor(ptlon or ~ ~ eevlce ror <<h(ch component aves de ~ lened)

Includes 100% radiograph and post weld heat treatment.

Shop hydrorest on pr1mary s1 e ac ps1g

"<<Stress Report to.be in accordance with the 1965 ASlfE Boiler and Pressure Vessel Code acr<<on p us en a r roug ummer cress spore or e

comp e e~y January 1982 Corrected Sections 2 c 4 and 13.

WESTINGHOUSE ELECTRIC C~

By

(HPr (:eruncace Hu(der) 6/16/81 Certificate of Authorgxa(ion No.

Certificate of Authorization Expires

>e certify char the sca(ements made in this report are correct and this vessel part or. appurtenance as defined in che Code con-(orms co che rules of construction of the ASME Code Section III.

(The applicable Design Speci((cat(on and Stress Report are nvt the res(yonslblll(~( (he NPT Cert!(lcate Holder for tyarts. An NPT Cert(f-icate Holder for appurtcnanccs is responsible for furnishing a separate Design SpcciCication and Stress Report if the. appurtenance is not Included In the component Design SpeclAcatlon and Stress Report.)

June 7,

79 Dace Ic)

Signed CERTIFICATION OF DESIGN FOR APPURTENANCE (vehcn epplicablc)

Westinghouse Electric Corp.,

Tampa Division, Tampa, Florida.

    • S.*.

Iy*ls.

0 t - fl..t Westinghouse Electric Corp.,

Tampa Division, Tampa. Florida.

Design specifications certi(ied by

""Sccess a'nalysis cepor'c cerci(ied by J.

A. Krul u

ear Ener v

s m

p,of g s.spenn.

R,s ma 22584-g L. Conway on Pro( Eg Sc ~c, Fla.

Reg N

18684 CERTIFICATE OF SIIOP INSPECTION I, the undersigned, holding

~ valid commission issued by che National Board of Boiler and Prcssure Vessel Inspectors and/oc chc State or Province o( Pennsylvania,nd employed b),

Lumbermens Hutual CaSualt

~ CO.

have inspected the part of a pressure vessel described in this Part(a( Data Report vn Jul 2,

(I)

. and state that tu the best uf my knu~ ledge and belle(. (he NPT Cert((lcate Hulder has constructed this part In accordance, with (he ASME Code Sect(un III.

By signing this certificate., neither the Inspector nor his employer makes any vvareancy, expressed or implied, concern-Ing the par(

described In thts Part(a)

Data Report.

Furthermvre.

nel(her the Inspector nur his emplvyer shall be li'able in any manner for any personal injury or property damage:

oc a loss ol any kind arising lrom or connected

<<ich this inspection.

Dace July 2,

.c<<F'A (no pe eeoc' SIC nel use Commi s s i on.s Penns lvnnia WC 223l H ~ cconel aoetd, Sc ~ ca

~ ptovlnce end Ho.

Sa<<[ salt<<ntaaa I <<sat ~ s ~ an It<<an ul I ~ ~ ~ ~ ~ eats ta ~ ~

aa usta<<me

~

<<n V I>>

a<< ~ tu s au<< adta)

Cpa

~ ~ I ~

~ ~

s

~ I I C)l aa<<C4<<tata<<en an

~ I ~ tn ~

I ) 0 a ana ~

3 ~<<m

~

~<<au

~ t ~ ~

a t a

~

~

~

au ~ at<<aa<<a<<a t

a

~ ~

~

<<mam<<a

~

<<n

~

meta ~

Cu' aa pep ~

'lc ~

~

~

Page 8 of 26 I'()I(')I N-2 (bock) 0 0-Items 4-8 Inel. co be completed for single wall vessels, jackets of jac'keted vessels, or shells of heat egchingers, I

sh,ll, hl;,I r

.s,~ Th;,h.,;All....s.,. D; ~.

I,.;. L.s,h

.Is ***

,IOr A Cl o

90 000

. '"'h*.

""" ".06..

h*

h*."I ***

(Kind ts Spre. Ho.) (Min. ot Rangt SPsellltd) gcamsl I ong Weld-Db 1 Bu t rf T'es Efficiency 100 C;h Weld-Dbl Butg T Yes No. of Courses (I, Ilesds; (i) Mitcrsal Loc ~ slosh (Top, bottom, tshds)

T S.

Crown Knuckl ~

Thleknr ~ ~

Radius Radius Ellipticat R ~ sio (b) Matcrtal C onl ea I Apc s Angl t Ksmlsphtrlcal Radius T.S.

PI ~ I Dlamtttr Sids to Prt ~ ~.

(Conv. or Conc.}

(bh II removable, bolts used (M ~ctrl~ I, Spa e. Ho. ~ T.S. ~ Slit, Humbcr)

Othet fastening (Dt serlbt or

~stsch skrsch) 1085 8.

Design pressure pss al 7.

Jac'ket Closure (Dr ~ tribe ~ s og st anti wcld, bar, rte ~ Ilbst gi vs dimensions, ll bolt rd, dr ~ cribr or s'krtch)

' Drop 3'Jeight Chacpy Impact F

ac temp, of I(-Ib oF Items 9 and 10 to be completed for I'ube sec(sons 9.

Tube Sheetst Stationary h(aterial SA508 CL-2a Dia 118. 25 T)s;cknes)l. 8$

Ahm,n, See Item 12 (Kind th 'Spec. Ho.)

(Subjtct to pars sutr)

(wtldrd, 8olscd)

Floating.

Mat er i a I IO.

Tubes:

h(aterial SB 163 Dia.

Thicknc ss in.

Att ach ment D.D.

I

. TII

.875,

.050 3213 T,

0 or gage.

Number ype (Ons Ocher Tube plugged)

ls

~ 'l Items II)4 sncl. Iotbe completed for K))su<dH&R(D(ggcxcKpxokhc~tcoc)gc()sg)IOHc)K&dKz(Ix)(Dt's).~~tc)t p'rimary Chamber.

Nominal Corrosion I I. Shell:

hlatecial T.S.

Thickness ~n.

Allowance in.

Di a.

ft.

in.

Lc:ngth ft.

in.

(Kind & Spec. Ho.) (Min. ot Range Specified) 12.

Se am st Long H.T.'.T.

T Efficiency stt ~

CirthWeld-Dbl. But j( T

').

Heads (a) Matcti ~I Yes T.S.

Location

'Crown Thie'knrss Radius Knuckle Radius Cliiptieal R ~ Iio Conical Apr g Angle Kcms sphtrleal R adlu ~

Pl ~ I Slslt to Ptr ~ ~

Dismrtrr (Conv. or Conc )

~

(a) Top, bottom, ends (b) Channel 5

~ 22 If removable. bolts used (a)

Meets Fracture Tough Pressure 3106 psig.

Ig.

Dessgn pressure

59. 41 1(in.

2485 pss at (b)

(c) ness RT

= 60'F Max.

Hydrostatic Test HDT Dcop toe ight Chirpy Impact 650 F

at temp. Of Concave ot ~ staeh skrsrhl fr-Ib oF ltc ma below to be completed (or all vessels where applicable.

I ).

Safe ty Vilve Outlets:

Number 1(s.

Nozzles:

Is vtp o s t ( In Ir I ~

Outltt ~ Dt ~in)

Humbrr 1

Primary Outlet I

Size Loc'scion Dia. or Sire 31" ID Type Matttlal Thle'knt ~ ~

Weld SA-216

l. 5" 31" TD End GR WCC
l. 5" R r Inl or e t mr nt Material Kow Atsachrd SA-216 Int e ra~11

)

Ssze 1G" I D I.ocitson Channel Head nr ',

II sh I

u 6

6',

6 'D I <;

(&)

Scssb Batga~l~~ougg~h h3 s;2"

& 3" ID I.(2) Lovers)~h1~+(7

() )MZDDgiglgn C lf(. hupportc:

Sksrt = I.ugs.....egs, (Y ~ ~ ur Hnl lrcvmss ~ ~I IHvsrbttl I Dt ~ s'as ht I IWhttt th lt owl Four main supports are cast integral I"itl) tile chamber.

II Puss>>

~ ld Kt ~ I 7tt ~srd.

s I

~ ~ s "~ I ~ ~ snsttnsl us

~ ~ stsntt ps ~ ~ ~ vtt >>ssh rosnrsdtns stmpt

~ ~ svst sstn sppsss sbt ~

~ r,

~,'

I'()Rhf N.2 NPT CERTIFICA

. IQLDERS'ATA REPORT FOR As rccluircd by thc Provision ol'thc ASME CcHIc Rage 8 of 86 Cu I

rNVCLEA~ARTAND APPVRTENANCES>>':crl. ".

Corr I.

( ~)'hfanufactufed by (b) Manu(ectured fot Westinghouse Electric Corp.,

Tampa Division, Tampa, Florida

<Home and adders

~ uf HpT ccrslneatc Holder)

Florida Poster

& Light Company Turkey Point Unit 4

IHsmr apd address uf H Ccr)lncetc Ho)dcr lue cutnolcscd nuclrar cumpuncnu 2.

IdentlAeatlon.Certl(lca(e Holder's Serial No. of Part FSGT 2992 Nat'I Bd. No.

Hone (a)

Cons)ructed According to Dra<<ing No.

1105J53 Dra<<ing Prepared by WTD (b) Description of Patt Inspected Tube Bundle Assembly (c)

Applicable ASHECodet Section III,Edition I 474**

, Addenda date S 76**,Case No.

1484 Class R, k,t Steam enerator tube assembl fabricated er ASME Code',

Section III Class 1 Huclear (Otfcf dc scrtp)lon of ~ crvlee for whtch eotnponcn) ws ~ dc ~ Ijnccf)

Vessel Component.

Includes 100% radiograph and post weld heat treatment.

Shop hydrotest on primary side at 3106 psig.

Stress Report to be in accordance s~ith the 1965 ASME Boiler and Pressure Vessel Code Section III plus Addenda through Sumfner 1965.

Stress Report trill be completed by January 1982-Corrected Sections 2 (c),

4 and 13.

>e certify that the st ~tements made in this report afe correct and this vessel patt or appurtenance as defined in the Code con-forms to the rules of construction o( the AS'dE Code Section III.

tThe at)f)llcable Design Speclf Ication and Stress Report are not the rest)onstb1(tty o( the NPT Certl(lcate Holder (or parts. An NpT Certlf.

ic>te Holder (or appurtenances is responsible (or furnishing a separate Des)gn Specilication and Stress Report if the appurtenance is not Included In the component Desigf) SpeclAcatlon and Stress Report.)

June 7,

Date Certificate of Authorization Exp)res 79 WESTIHGHOUSE ELECTRIC" 19

'igned By f)IPT CCrunea)C Hu)der) 6/16/81 Certificate of Authorization No.

CERTIFICATION OF DESIGN FOR APPURTENAHCE (vfhcn fspplicf)bIe)

D f

f I Westinghouse Electric Corp.,

Tampa Division, Tampa, Florida.

Stress analysis report J.

A. Krul Prof. Eng. State Penn.

L. Conway Prof. Eng. State Fla.

Rcg No 22584-E Huclear Ener S stems Design specifications certified by R I.II 18686 Stress analysis report cerci(ied by Westinghouse Tampa Division Westin house Electric Cor.,

Tam a Division, Tampa, Florida.

CERTIFICATE OF SHOI INSPECTIO)s I ~ the unde) signed, holding

~ valid commis sion I ssued by the Na)ional Board o( Boiler and Pressure Vessel Inspectors and/or the State or Province 0(

.Pennsvl vania,nd employed by l.umbermens Mutual CaSual t CO.

have inspected thc part of a pressure vessel described in this I

Partial Data Ret)vrt vn Jul 2

. and state that tv the best vf my knvsI'ledge and belle(. the NPT Certlncate Holder has constructed this t)art ln accordance u:Ith the ASME Cetde Section! II.

By signing this certificate, neither the Inspector nor his employer makes any <<a)fancy, expressed of implied, concern-Ing the part described ln this Partial Data Repurt.

Furthermvr<<.

neither the tnspectur nvr his emf)lvyer shall be liable in any manner for any personal injury or pfoperty damage or a loss ol any kind a)is)ng (rom or connected

<<ith this inspection.

Date Jul 2

79 In s p t c ) o I' 5 I 8 ns ) Isr Commi s sion s Pennsvlvania WC 2231 H ~ I lonsl t)>>std, Sl ~ ec

~ Ptoulnc ~ snd Ho, ssl rl~ ss t ~ sl

) In

~ I ~

sn lusts st IIIII I' I at I rs Is s sssss

~

tls

~

1 us

~

~ ) )s ~ J

~ sl

)

~ )

~ Ir

~ ~ s

~

~

II, I f I sss

~ sun lss sltssl I ~ '

sn Ins ~

~

I

~

~

~ J JS

~ S W ~ ~ ttJ

~

J u

~

~

~,

I

~

I JSJ s

, ~'

~ X sdc

l:Olb( I(-2 (b.cl.)

Page 19 of 26

)temp 4-6 Inyl. <o be c'omple(ed fo( single wall vessels, jaeke< s of jacke(ed vessels, or shells of heat eschangers.

Hominal Coiroston u.'.icr A cl 2r I 90000 ra;t'c',,rtt;An,,,0(so;,

  • J, * *; t,,(te 'J,
      • 'j.

evrams:

l.ong Weld-Dbl ButtH.T.'es R.T.

Com lete Efticie cy II<h Weld-Db 1 Bu t tll.T.

G. Ileadsl (a) h(aterial Yes T:S.

No. of Courses

( b) h(a < eri al T.S.

(a)

(b) loc ~ < lon (Top, bottom, ehds)

Crown T h Ic 'k n e ~ ~

R a d iv a Knvc'kl~

Radius Clllp<lc el R ~iio C on< cat Ape ~ Ahele Hemispherical Red(vs ft.<

Diameter Side (o Pte ~ ~.

(Conv, or Conc )

If removable, bolts used (St ~ <eris<, Spec. Ho. ~ T.S. ~ Slee

~ Hvtnber)

Other fastening (De scribe or ~Ilach

~ lcrich) 1085 8.

Design pressure I l.

J ac'kei Closure (De ~ c ttbr ~ s oe e t ant< weld, bst, etc. II bar civr 4 (mr no i one

~ ilbolted, dr scribe or sketch)

. 'Drop V'eigh<

'harpy Impae<

PSI 556.

F at <ernp. of I(-Ib oF Items 9 and IO io be completed for tube sections 9.

Tube Shee(sl 5<a<ionary. hla<erial SA508 CL-2a Dia 118. 25 (Kind Ic Spec. Ho.)

(Sub jrci <o pre

~ cute)

Thiclcness21. 0A.

Attachment See Item 12 (Iycldrd, Sotted)

Floating.

his< er i a I IO.

Tubes:

Material Dia.

Thickness in O.D.

in.

Thtekness

't c ~ cc.

Number h<tachrnen>>

3214 Type" V

(Su. cr U)

Items I I-!4 Inc). io bc completed fors(tt9cx)rl()n,j(lhcxxs)f()ac3((<Sxh)(x~ivmc~x')ocirKa@xwzxx(3h2IRxccKxx Primary Chamber.

Nominal Corrosion I I.

Shell:

h(a<erial T.S.

Thickness ~n.

Allowance'n.

Dia.

ft.

in.

Length f<.

in.

(Kind rs Spec Ho )

(Stin. ol Rance Speci(ird)

I 2.

Se am s:

Long R.T.

Efficiency 13.

)leads (a) h(a(eris)

I oration Thlcknr ~ ~

Crown Radtlt ~

T.S Knuckle El(ip(leal Radius R ~ iio (b) Material

-216 Gr W

Con(eel, Kern<spherical Apca Anclc Radlv ~

fl~i Dismc<cr Side Io Ptas

~

(Conv. or Conc.)

( ~ ) Top, bottom, ends (b) Channel

5. 22.lin.

If removable, bolts used (a)

Heets Fracture Toughness Test Pressure 3106 psig 14.

I)cstgn p<c SSuic 59.41 Concave (b)

(c)

RT,

= 60'F Hax.

Hydrostatic lbDT Dro (Describe or ~tiach

~ ketch) p i'e<gh(

('h a rpy Impar't a< iemp. o(

6 0 2485 ps( al I(~ lb cF items brio<<" <o,b( completed fn( all v( saris evhcrc appl<c'able.

I ).

Safe i y V a I vc Du< I e( s:

Numb( I IG.

4osalesl Purpose (Inlet, Dvilr<~ Dt on)

Hvmbt I Dea. or Sire Size l.oc a<ton Typr S< a ItIi a I Thlcknr ~ ~

Re tnfotccmen<

State<tel KOw At< ~ I'he d Primary Outlet W ld A-216

)

31" ID End CR IJCC

1. 5"

~caccaL1y3 Gr WCC Cas t Sire 16" ID I oe (inn Channel Head 3t1t,,.

ii. Jev.a6 i",

6 ID t t.(I) Stub Bar~rel

2) lover Shel I rs..J,t a,

3 s;2" I 3" JIJJ (-) lower Shell 2" ID~1 Tr. nsi cion CI:

IH.

Svpptirt Il SL st<,

I. ugs.,

I.cgs..

()(hrt.. '

A(iacI I Yr ~ vt Hol

<Hum(tati (Hvhtltrt<

( f)t ~ re ~ It~ I Fn>>l miiin suppnr ts (lre c:lst iiltegral k2) th I'lie chamber.

I I( Pot

~ t It< <It ~ I ~ T ~ ~ st ed.

I

~ ~ ~

~ tt ~ ~ tht ~ thol t ~

~ ~ ~ ~ ths I pt ~ ~ tat t w Ilh r at he't Jttv

~ ~ tnp ~ ~ ~ tetr ~

nt h

~pl'I

~

ttt ~

I Iy+u J V V I 6V I

I'()R'tt N-2 Nl'T (;I RTIPICA'()I.I)I'.RS')ATARl':I'()R'I I'()I( NU('I.l..

'AR'I'ND AI'IIURTI:NAN('I.'47~

'As require thc I'rnv<siun ur thc ASM)'(-'i~c Rules. S vn III. Div. I Corrected ge" rt

( ~ ) M

( c(

d by Westin house Electric Cor Tarn a Division Tam a, Florida

<Home and eddic<i o( HpT ccrunce<c Hinder<

(b) Manu(ac<ured fo(

Florida Power

& Light Company Turkey Point Unit 4

<Hamc and eddrr<6 of H (.'rrtlnra<r Ho<der <or completed nuclear compoaenu 2.

Iden(I()carton Certl(lcate Holder's Serial No. of Part FSGT 2993 N a<'I Bd. No.

Hone (a)

Cons<rue<ed According <o D<aeving No.

Dressing Prepared by (b) Description ol Part Inspected Tube Bundl'e Assembl (c) Applicable ASME Code(Section III,Edition 74**

, Addenda date 6 76'*

1484 1

,C* N.

CI * ~

R k

Steam generator cube assembly fabricated per ASHE Code, Section EI.I Class 1 Nuclear (Bflef'deecr<p<lon of

~ err<ca for eeh<ch componen<

ut ~ ~ de ~ <Sned)

Vessel Component.

Xncludes 100% radiograph and post weld heat treatment.

Shop hydrotesc on primary side at 3106 psig.

  • ""Stress Report to be in accordance with the 1965 ASHE Boiler and Pressure Vessel Code ection 11 p us A

en a t roug Sulmner Stress Report wil e completed by January 1982.

Corrected Sections 2(c),

4 and 13.

C e certify <ba<<be s<a<emen<s made in <his repor(

~ rc correct and this vessel parr or appurtenance as defined in (be'Code con-forms <o <he <ules o( construction of the ASIDE Code Section III.

y (The apryllcabte De>>lan Speci(lcatlon and Suess Report are not the responslbtllty of the NPT Cer(l(lcate Holder for parts. An NpT cer(l(-

ica(c Holder for appurtcnanccs is responsible for furnishing a separate Design Specification and ss Rcport if the appurtcnancc is not Included In the component Design Speclflcatlon and Stress Report.)

Dace June 27 I<)

79 Signed WESTEHGHOU

<HPT Ccrt<nca<c Hurdcr<

By Cer(ilica<e of Au<boriza(ion Erpires 6 16 81 Certificate o Au(boring>>(ion No.

N-1155 CERTIFICATION OF DESIGN FOR APPURTENANCE (<erhen <rpplic(<ble)-

Westin house Electric Cor.,

Tarn a Division, Tam a

Florida.

77<5(res>> analysis

<epor( on (ile at Design specifications cc<< ified by

'<"< S<<ess analysis cepor< certi(ied by stin house Electric Co m a v

J.

A. Krul Huclear Ener S stems Prol. Eng. Stare ~n'~ Rcg. No.~I~4-L. Conway Wesrin house Tao a Dinlision p,yl ps a, pla s,s.sy.(9684 CERTIFICATE OF SliOP l<NSPECTIO<E I, the undersigned.

holding a valid commission issued by <he National Board of'Boiler and Prcssure Vessel Inspectors and/or

<he 5< ~ <e or Province of Penns 'lvania

~d employed b)

Lumbermenc Mu al as;(<al v

Lon Grove, ll1inois have inspected

<be part of

~ pressure vessel described in <his Parttal Da(a Repvr( vn Jul 2

ls 79. and stale that tv (he best vf my kn<<u'I< dc<

and belief. the NPT Certl(lcate Hvlder has cvnstructed this part In accordance 44'tth the ASME C<rde Section III.

By signing this cer(ilica<e, neither <hc Inspector nor his employer makes any ~artan<y, ezpressed or implied, conce<n-Ins the part desert bed In this partial Data Re(yurt.

further<nore.

neither the Inspector nur his em(ylvyer shall be liable in any manner for any personal Injury or property damage or a loss o( any kind arising I<om o< connec<ed ai<h <his inspee<ion.

Date July 2

79 lr t n Ip e c I o r' S (c rla < Iyr ~

Commissions Pennsv] vania WC 223I H ~ <<one< Board, 5< ~ <e, Prot<not end Ho.

su/; I ~ %t ~II I ~ I ~ ~ ~ ~ In rl ~ rn I I ~ e ~ ~

~etlrl ~ \\

~

~ II~ a

~ rla ~ mal I ~ lrst I m

~ IN

~I I ll ~ ~ r ~

~ ~

~

~

~ I I I

I

~ ~Ilo\\

I ~ ~ ~ rl

~ rl

~Itin~

1 7 os Irll~

I ~

~ ~ I

~

~ I I l t

~

1

~ ~

e I t e

~

n I ~

~

~ ally *e t

~

I

~

I I

I

~

N I ~ ~

<<0<))(

T< I) <orm (Eooonol<<av <lit<><n nei<< Ivm <he Or<<ca Dc<7<, Asrt<k. 3arr 6, a)<(i 5<., New vryra. N "

<o<r<

~

Page 12 of 26

~

Ite'ms 4-8 Incl ~ Io ~c 'pieceJ for sing wall vessels jackets of jacketed vessels ol shells of heat egehangers.

"s n-Cl 2 9QQQQ Ho in I

+**

Corrosson 06 I)

  • A~*

AAA I IIA 4.

Shell:

hieccrsal I.S.

Till AII '. Di'.

I.

i. L II l.

(Kind h Spec Ho.) (Min,ot Range Specified)

I,nWeld-Dbl ButtH T Yes R T Complete Efficiency 100 7t rchWeld Db1 Butt(I T I G.

Ilcads:

(a) h(aterial Yes T.S Complete H

f (b) hister' T.S I ot ~ I)On (Top, boll om, s nd a)

(a)

(bl ThlCIlne ~ ~

Crown Radius Knurat ~

Radius Clliplic~ I R ~tio Cot)leal Apts Angle Hemlaphtrlcal Radius Flat Dlsmettr Side to Pre ~ ~.

(Conv.

os Con'c.)

If rcnocable, bolts used (Materi ~ I~ Spec. Ho. ~ T.S. ~ Slee

~ Number)

Dchet fastening (Describe or ~Itach sketch) 8.

Dc sign pressure I

1085

).

J aekcc Closure. (Describe

~ ~ ogre snd weld, bat, etc lfbst give dimenesona

~ Ifbolted, de lcrsbe or ~ ketch)

Drop Veight

'Charpy Impaec 556 F

at Iemp. of psI ac (t Ib c

Items 9 and IO to be compleced for tube seecions 9.

T b Sh ts:

Sc tio ry. h(; I SA508 CL-2a D'

118. 25 Th;ek)1.8$

A<<h,n, See Item 12 (Kind ra spec. No.)

(sublrct to prresure)

(Weldrd, Bolted)

Floating.

h(ac eri al Dia.

Thickness in.

Attachment

'*"--=IIIL'"'".

(Eight Other Tubes Plugged)

(ss

~ <<u)

Items I I-I4 inel. Io be completed for 'fox~~@>ecfx>atxu4og>

cbmmxedxxexofcc)xxe(xx)k)IK>>4~x)s>>agrpsx Primary C'hamber Nominal Corrosion I I. Shclll h(aterial T.S.

Thickness in.

Allowance in.

Di a.

ft.

in.

Lengch ft.

in.

(Kind d Spec. tro.)

(Min. of Range Specified) l2.

Seams:

Long, H.T.'.T.'fficiency 7t C;<<hWeld-Dbl. Butp T I l3.

Heads (a) h(aterial Yes TS T.S.

Loc ~ I lon Cro~n Thickens

~ ~

Radius Knuclt le Rsdsus Clliptlcal Ratio Conlcsl Apex Angle Hemsapheriesi Radius Flat Side Io Pre ~ ~.

Diameter (Conv. or Conc.)

(a) Top, bottom, ends (b) Channel

5. 22 Min If removable, bolts used (a)

(

1"leets Fracture Toughness RTHDT Pressure 3106 psig l4.

Design prc c sure 2485 59.41 h)

(t) 0 h I

~

I S

60'r Hex.

Hydrostatic Test Dcop 4'eight Charpy Impact 650 F

a<<cmp. o(

Ci~o~eu fr.lb nf:

Items below co bc completed (or, all vessels

<<here applicable.

15.

Safety Valve Outlets:

Humber IG.

Hor tie s:

Loc scion p ~OA ~ IlnltI.

Oulltl, Dt ~ snl Prima rv Inlet Primary Outlet Humbrr Dia. or Slee

-31" TD Type Matrri~ I Thtchne ~ a Iield SA-2) 6 1.5" 31" ID

End, GR WCC
1. 5" Resnl~cement M ~ters ~ I SA-21 Gr WCC KOw Atc ~ Ched

~nmn~y Cast I).

In spcet Ion hl anhole s.

Ho.

Site 16" TD Loc'ation Channel llegd ot I s:

II dhl.I'.

6

.Iis,~<"

0 L.'A)~tub~ette3

...;. foal.

"ss III. Arl.'l; Ho L

s I.

A Ihh",.-..g.

hdM~eloR

~

ID IY~ ~ vs Hol ftrumhttl IHumbtrl

~

CDt ~ rrlhtl IWhttt Ch tlowl Fc ur main stippf)r ts are cast integral Mitli the cham(>er.

I II Isoes

~ Iq Itt ~ I ~ Tt~ ~ltd, I I.s ~ I oint ~ ssstrnal st

~

~ s ~ ~ tlat pl ~ ~ ~ ust wish rustle sdtns ldtmptt ~Ivtt hrn applsr sbtt,

~ I'Tl) Draw)nl LI).

110SJ 5,

Sill> 04

Page 13 of 26 I:()I('lIV-I )'I:A(."I'(I:I li.- I]:i'I'A Itl I'f)l('I' (~il:( LI.AII 4'ES( I;LS As ~>>irftrl lly tile I'rt>t'isinits tlf lllc AS~I

'tt(IC IluIcs

] hlanufactured h)

Wes tinghou.,e Elec tric Corpora tion, Les ter, Pa

~

(xe nl~

e nd addle

~ s of ltonuimrtga cg e

2. h'lanufacturcd fur Atomic Power Di ision, <~estinjhouse Electric Corporation, Pittsburg, P-home and addgce

~ of I'ecrhmacg)

3. Typ Vertic(el rl 4 S team Fenv ** I I' 6 6/(-634 1-8 (

) N'I ng No. 772 7, 6;I, 1969 (H

(*.

V

.) (T

<<.I e

~ ((

g.I I )('))..~'I (p*

m

)(.)

items '4-8 incl. to be cofnpletcd for single <<'all vessels, joe)gets of iac heged vc sscls, or shells of heat cxchan ers.

(Kind 6. Spec. r'o-)

h tttlttIV Cor ro $ 1 0 n

.S.~~~

7niei:nes~

in. hi)o<<'ance (atgn ot range specified),

m I 0 eg ~ 3

~ ll 2

X.R.

  • 2ft 3/16"

~

. D mlQDI.I. L g(4~i.~

  • -13ft 3"

-*19ft 2-7/16" Efficiency if Cbl ~ ~ B)

Girth Weld-Db -Bu tt ll.T.'e X.R. Com lete No. of Courses 5

6. lleads (a) hlaterial Location (Top, bottogn, ends)

(.)~up (b)

Cropen Knur kIc Thickness Radius Radius (b) h(atertal Elliptic ~ I Conical

~

Ratio Apex Angle Hemispherical FLt Radius DLmctcr Sldc toPrcea, (C gmvc x or C one a vc )

Other fastening (LLtcglal. Spec. Xo.. T.S.. Sixc. Xumbcr)

~

(Dceeglbr og

~ttaeb akcteh)

7. Assv. (:)osure Thickness 3

1 2: Diam.

1 3 ft.

3 in.

0 therwise same as itea 4.

P(ield (Describe

~ ~ ogcc b, oectde bag, cte If bag give dimcns acme

~ dcecgibc or sketch) oF Ch rp.

1 30 ft.lb Pneurnacic 8.

onstrucced for

~.

'o H drosracic ot j Test cairn p,*, ~)08 p I' N *.( pMF

~((

p.of 10 F.

o o (oo 1 p 1356 p,f 0

items 9 and lo to'be eornplcred for tube seccions.

"-))

'Kind tg Spec Xo )

(Subject to prraa,)

Floating.

hlacerial Diam.

an. Thicl'ness (Kind lhg Spec. Xo )

inches le. T Spell.l m L)~88-16 0 0.~78 Io. Tniet

.~00 o, g g

in.

N (Kind 64 Spec. Xo.)

items l l to )4 incl. to be eotnpletcd for primary chamber in. Pctachtnenc Weld e" (trrtdcd, Bolted)

I.Sn eg 3260 T)7 c U

(Straight or V)

Nominal ll. Shel la hlaterial T.S.

Thi<<kness in.

Corrosion Allocrance in. Diam.

fc.

in. Lengch fc. in.

)2.S e: Lo g N.T.'

'e e.p()..g(

e) cg og Xo)

X.R.

Efficiency (If Class B) ev Garth t.'3.

Ilcadst (a) h(aterial Location'hle knr a ~

Croem Radius No. of Courses X.R.

SA 216 (b) hlaterial ~~'~ T.S. QEQQ (c) hlatcrial TD Knteklc Cttlpt teat Conleol Hemispherical Rlat Side to Pres ~.

Radius Ratio Apex Anglr Radius DLmctcr (Convex oc Cgmcavc)

(a) Top, bottom, ends Il>>a,,I '14 miD (c) Floxcing lf rcmoeable, bolts used ( ~ )

(b)

(at ~trrlat ~ Spec Xo., T.S., Sgac, Number)

(c)

Other fastening (Dreerlbr a att ch sketch)

Pneumatic

)4. constructed for sf)c cified

~Her ~cn 'r Test OeS28(l p

~2/(

p*l ~ (N F~60 F

( (

p. of~+

F

('

8 70oF liin.

List o'.hcr intrgnal or rxtrgnel per ~ ~ uyr'e <<'Ith roln ldrnt tcmprgatupr whrn apptltabtr.

Stub Barrel (portion of lower shell)

    • Upper Shell

I

~

YOlIA1 ib'.-I (h:Ick) items bblosf to bc completed fot all vessels

<<here applicable.

Page 1.4 of 26 16A-6341-1 '" ".

(Dc s cribs )

15. Safety Valve Outlets: jh)utnbcr

~

Size Location

16. )zozzl est P ufp o s c ' lfhIcI ~

(y(zt)cl ~ Dfa In)

Number D)sm. Of Sicr Type etc rl~ I Thleknrsc Prim.Inlet 1

3~0 1

2 I.D.

1" ld SA-216

~2 4

( 'I='im Feed(:ater

)

16 3/8 X.D. ~End Sh-336 13/16 II o.l *r di1 ii hol d.

Hd..3 ed~16 I

~

.t.od i

2 P

mer he ne II 0,

1 z*t H dhoi, I:o.

2 S1 6

I.D.Lod i1o St b She

Threaded,

)hfo.

Size Location (Ycs of No)

I>>

d (Number)

Rrznfofecmf nt stater I~ I H

o<<'ttached S tee

~

Welded Steel Welded Head 1

U er Shell Main supports are httachcd aa)be.

(rh'bcfc dz )Iozv)

19. Remarks:~c~

emen ode closure h

d o

for the a

f sh')

z:

T fs zoo Off s ecified on Manufacturers'artiaT 5ate Porn)s

~);-2 kiieh at Vi'estinnhouse.

CERT)FICATIOX QF DESIGN, Ii fil I

Wes tin house Electric Hca t Trans fer Division Les ter Pa.

stress ana)yc)s report on f))e ~ t Wes tin houSe Electric Hea v

n L

Dcclsn spec)fications crrtlf)cd by W

Atomic Potser Divis on p<<f. EntH. Jenl:inst I, Pa.

)) s. N,'4278>

z li I ~

Iii d hr H

Heat Trensf sr division t 6 i.-z JE~Berley,.pe.

I,< II,14088 Wc ccrtifv that the statements made in this rcport are correct and that ail details of mater sign nstru ion, and work-manrhip of IIIis prcssure vessel conform to the hS!h(E Code for )htuclcar Vcsscfp'.

(Slanufacturer)

Certificate of huthorization Expires CERTIFICATE OF SIIOP INSPECTION of VESSEL SIADE BY

~I 1, tbc undcrs)cncdho)d)nz a vs)Id commis ~ lon issued by tbe National Board of Boiler and pressure Vessel )ncpcctors and/or the SI ~ Is r

hare inspected the pre'schee vessel described in this Inanufacturer's dat ~ report on

)9, and elate that to thc best of'y know)cd ca and belief, the manu!me)urer hac eonctructed thl ~ pressure vs sec) In accordance with the ASI(E Code for Nuc)car Vcs ~cl~,

By alen)nc tbl ~ cert)ficatr neither the )nspcetor nor hl ~ cmp)oyer makes any <<'arraruy, expressed or bnp)led, concernlns the pressure vessel drsrr)bcd In Ibis~nufacturer'c dat ~ report. Furthermore, neither the inspector nor hl ~ employer shall bc liable In any manner for any personal injury of props(ty de mace or a )ocs of an)'nC mr)cine)rom or connected with this Inspection

8 /'Cc-ncpemor 'snature

" "m>>nard,. tat Or rOVinCe O.

CERTIFICATE OF FIELD ASSEiIDLY I INSPECTION I, thr underslenrd old)

C a 'valid comm)ca)on lsc)ar)) Uy th National Doard of Bol)er arhd pressure VcssyAnspcctor d/or thc Slate I

or Province of /

r and cmp)oycd by~

of compared Ibc ct Icmcnt ~ in this manufacturer c dat ~ rcport ef)th thc dcccrlbed pre scuse vessel and state that pafts refcrrefl to dat ~ )II ma 7'

~

~ not included in the ecrtlf)cate of shop Inspect)on have be en Inspected by mc and that to the best of my know)cdec and belief Ihc manufacturer has constructed and acscfablcd thl ~ pecaure vea

~ el In accordance with Ihe ASLIE Code for Nuclear

Vessels, Thr drscrlbed vessel was inspected and subjected to a

by d,

~ ~ i

~i i~3 d.i,primery side I 1356 psi secondary side.

D) clcnlfrt thi ~ certificate neither the Inspector nof his cfap)oyer makes

~ ny warranty, ecpfccscd or ifnpllcd. concerts)nz the prf scuse vcs

~ c) df scribed In this fmanuf act urer

~ dot ~ repoft, Fur thermae, nc )ther the Inspector nor h)c f mp) oyf r she)l br ) lab) e ln any fnannc'r Iof any personal Ihry of pfoprftygd.limes of a'loss of any kind orle Ine from or connected with this Inspect)oa Date

~-

'./

~ 4

~ ~cf Comin) ~ ~ lone In 4prc Io f ~ ~ S z c no 1 urc' I or tteean o.

Pf in)cd in U.S.A. (7/(h9)

Thts Form Is obtainah)c from thc-AS;.!Er 345 E's <7th Stdz hc>>'ork, N.Y. 10017 hssy.

closure by.Commercial Contracting Corp., Detroit, liichioan.

0 I

I

Page 15 of 26

!:0!!k! M-) ))A+ACTj')l!IlS;.0,',T'll l'OllT. l'LiCLC 'l 1'1;SSL'LS.;:;:::,,

As rcqLsircd bv tlt<< I'rnvisirn>> tkf IItt A.~51!'. (.ndrt l(kk)( s 0

r

/

/5

~

)t)bnufactured b)~~)ggtch~ggJ:~~~Qt57 t) Qn~lcQs P

1 2.'h(rnufactured for

~~ILnn)O~SID~~

i Nome ond <<dhole

~ ~ ol Phpchbsrr)

I 1

3. Type)1~)tlCal IbindS+ea~en,.Vessel Ho. ~l

)

M r'j Bd. Mo.~6~ Y.B jt~]6+

(klorlz. or urn.) (Tank.for!jr!cd,ktr~ 1 Er )

(hi!ra. serial No,)

sl ~lr tb stvtr No,)

Items 4-8 incl. ro bc completed for single <<all vessels, jackets of jacketed vessels, or shells of heat cxchrn ers.

"3 AM.'8'" 5 Sh.,s:,bj.,j 8~%02 Gr BP.S. 60000 Tj sk

  • c2-(Kind 60 sprc. No.)

(htbn. ol range apse(@cd)n nn

  • 2ft 3/16" All 06

. D'0)61

. b 0(b22 r,, 10 5 Ilgj.

  • "136 n I in. **19f0 2 7/16" X.R.

Comp le te Efficiency V CL ~ ~ 8)

Girth Meld-Dbl-Butt II.T.t Yes X.R.

Com lete Ho. of Courses 5

r ~

6. Heads (a) hlaterial

~ Locst lors

~

(Top, bottom, ends)

SA 302 Gr B

TX.

80000 (b) h(atcftal Cro~

Knuckle Elliptical Conicsl Thickness Radius Radius

. Ratio Aper Angle Hcmlapherlecl Radius Flat Side to Prs 0 s.

Distorter (Convaz or Concrvs)

(b) 3 1

2 2:1 Concave If removable, bolts used (htatortaL Spec. No., T.S., Size, Number)

Other fastenin (Dracrkbr or ~!tach skrteb)

7. JhSS)'osure Meld
8. Constjucted for oeSXgn press Thickness 3

1 2" Diam.

13 ft.

3 (Describe sa ogeo 6h bvekd. bsr ~ etc V bar F Charpy Impact 1085 psi at h(ax.temp 556 F

at temp. of in.

Othertjise same as iten ft.

give dimcna!ons, 30 fr-lb 10 oF drscrlbr or sketch) 0 Pneu inst it; Hydrostatic or [ Test

}Pr *.

1356 P*'Items 9 and 10 to bc completed for tube sections.

~'~

()~d tc Spec No.)

(Subject ro prese.)

Floating.

)4atcrial Diam.

tn. Thickness 22 (Kind Sb Spec No )

laches

)0. T be 1 bj 9

) )~B~

'O.D.~78

. Th ck

.~~

0 0 MB M

b (Kind rc Spec No.)

in. Atiacl mentibelded (tb'o)dsd, 8oktcd) htt ch 3260 T>7c U -.s (Straight or tj) items ll to 14 incl. to be completed for nrinarv chamber Hominal Corrosion T.S.

Thic kness in. Allowance in. Diam.

ft.

in. Length~.

ia.

Girth 1/al H.T.'.R.

Efficiency (V Clos ~ 8) b

13. Ileads: (a) h( ~ terial TB.

Cro~

Loc ation Thkc knc a ~'adius (a) Top, bottom, ends

!b) Gh e)

~~ min (c) Floating SA 216

~ (b) hlrterial ~jhh T.S. 1QQQQ (c) hlatcrial Knuckle Elliptical Conical Hrmlsphrrkcal FLt Radius Ratio Alber Angle Radius Dkzo)ster e to Pres ~

(Convrr or Concave) lf rcmovablc, bolts used (a)

(b)

(htatrrlsbj, Spec No., T.S., Size ~ NumWr)

(c)

Other fastening (Dracr!br a attach cketch)

Pnr ulna tic

14. Constructed for hpecifted Ilydrostatic or Test j)00'isn
  • a~0) j j 9 bj

.9 j ~5)L P

~1 9

j

~ of~

P ~bhnT)a P ~~'

lf Postbvr ld ttrst Treated LI~ t other trbbrrrk ~ I a rrtrrrbat pa

~ aupr ~ ~'I'.h coins ident trmprrslupr whr n applicable Stub Barrel (portion of lower shell)

  • "- llpper Sllell

I

Page 16 of 26 I'OIOI 8-I (l)ack)

l>rrns 'tfcjow to b>>compictcd for a)i vess>>>s whet>>

> pi>liesni>>.

" '1 6A'-634 1-'2

') 5. Safe>) Valve Ou>iecsl Nu>ni,>>>

S>zc Location

/

I('. Nozzl>>st Purpose (Intr> ~

Reinforcement

/

au>trt,r sin)'umbci Diern. oc Sixr Mal>c rial This knc ~ s Lls>ctlai Prim. Inlet 1

30 1/2 I.D.

4'eld)

SA-216 2 3/4 Steel Prim. Outlet 1

~3012 I.D.

Eud l'r 1'cc ~23 li S'teel Steam Outlet 2

28 I.D.

~

'Meld~

SA-336 ~11 2

Steel Feed+a ter 1

16 3/8 X.D.

End j

SA-336 13/16

'teel

]7. Inspection hfanholes, No.

3 Size 16 I ~ D-Loca>ion+2 Primar Channel

. Head 1

~

Openingsl Hsndholes, No.

2 S>zc Location Stub Shell

~

Threaded, No.

Size Location

18. Supports: Skirt NO Lugs Legs 0'>>

(Yrs or No)

(Number)

(Number) ru ii)

)low Atterbrd Inte rail Cast 4>elded fielded U

cr Sh e13.

Hain suppor ts are A,eh,d inte ral t"ith chal".he (Where h Ilo")

This multi-chamber steam

'enerator tdas desi ned

& constructed to meet'reouirezen of ASHE Code Nuclear Vessels Sect. XII.

This N-1 form is to be si ned off bv tne Code Xns ector under Certificate of Sho Ins ection for evervthin listed exce t the Assv.

for the latter items on Certificate of Field Assv.'ns

. below.

All other mf

. is s ecified on Manufacturers'arE3aT'5a'"Wo'rms"2-"2" k3 iewo ak"Itektin house.

CEI<TIFICATIOt OF DESI G.'t Electric Heat Transfer Divi ion Le e

P closure h drostatic test and subseauefit insnection.

The field inspector must si n off S>ress analysis repeal on lilt ~t~t Dcsien specifics>icms cecil(lad by lf S>ress analysis rrport certified by n

1 T

r r

p i.t B~~m

~P R'r>>'.427SE a.r;t '-'~sz1ep..~~ I m>>.~AL VJ'e certifv tha! >he s>at>>ments made in this report are correct and that all details of mat sa

~d>>

Sn, r.

struct n, and work snanship of this pressure vessel conform to the AQIE Code for Nuclear Vcssele.

r Date (Llo~laccurrt)

Certificate of Authorizatson Expires

.CERTIFICATE OF SIIOP I, >SPECTIOih VESSEL HADE BY at

~-

D" I, the ua$ ersfe d,'holdlnc a vand commi ~ ~ lon Issued by tbe Natlcmal Board of Boilernnd Ptesaurc Vessel 1ns pe>>tots and/or the S>a> ~ ~

or Province of d employed by of hsvr inspected the ptr'seve vessel described In this manu(ac>ver' data repor> on

~

o (9~, and

~>ate that to the beat of'>ny knowlcdsr and belief, the me>iufae>uter has cons>ruc>rd this prcssure vessel in acccrdsnce with thr ASSIE Code fof Nuclear Vessels.

By

~ icnins this cehlfica>c neither tbc Inspeetot nor hl ~ employer makes any warran>y, rxpressed or Impurd, conccrnfns >bc prc ~ sutc vessel described in this.manufacturer's data teport, Fv'tbermorr, neither thr lnspre>or nor his employer shaH br Habit in any >nannrt for

~ ny prtsonal injury or property dsmazc or ~ loss'f a

~ kind ati ~ incfrom or connre>ed with thi ~ inspection.

Da>r I9 Coco>at ~ alone nspec>or'e m>

rc Nstsonal Boant CERTIFICATE OF FIELD ASSEIIIBLY IYSPECTIOX r I. thr undrrs(snrd, h Idins

~ valid commlsslon lssu~y the

~ >lonml Hoard of Bollrr and pressure Vess l.inspcc>ots tt/or thc S> ~ tc

~. ~

~

or Province of

'c and employed by or 8

b vr compared thr

~ t ~ trmrh> ~ in thl ~ manufac>urer'6 da>a rcport v(lth thr described'prc

~ sure vessel and s>a>r >hut patt ~ refrncd to as i>em. 7 8

24

~ not included ln thr ecrtlffcate of shop Inspretlon have been insprc>rd by mr and that to tbc best of >ny knowledge and belirl thr ~nufactvcr has eonstn>e>sd and as ~ e>nbled this pressure vea scl In accordance 'with thr ASI(E Code fot Nuclear 'Vessels Thc described vessel was inspected and subjec>ed

>o a

hy p I.Primary side

& l356 psi Secondary side.

By ~ tents this cet>ificatr nrl>hrr thc h spec>or nos his 'ployermake ~ any ~atranty, exprcs ~ e'd oc impllrd, eceecrnlnc thr psrss>>tr vc ~

~rl described in this mmnufar > ver's da> ~ rePost Fv>berm~a

~ nr I>brr tbr InePre>or nor his e mPloyer shall be liable ln any ~nnrr for any personal inj y ot proper>y damasc or ~ loss of~my kind sr I>inc from ot c onnrctcd wl>h thl ~ inspection Da>r l9 Cunvni ~ ~ lone lnsprc>nr'a.

b>enm>urc' e anQ IcO ~

I'tinted in U.S.A. (7/Ci9)

This Form i" c bt>sinai>lc'rnn the-AS'LIEP 3q5 F q7(h SI ~, New York, N.Y. 100I 7

  • Assy closure by Commercial C(tnt.ract:in@.Corp., Detroit, Michigan

)'age ld of 26 I'OILAI I>'-I !>)At '

'A(.l')PIC)'.ll:)')ATAIll'I())I'I()I

'IICLLrAII i'ESSE) S As rc rcd 'by t)lc I)rot'Isiolts of tllc A'5~II~

dt'()(u)r's'"'","-'".-.'>'.i-.":e.".~

""'r' "'

a dr...

2-Manufactured for At()lttiC POt~er DiviSion MeS tin~hOuSe EleC tric COr ore tiPn Pit tsbuz P

~

~

d e -"

rr>

~

~

3TyP Vertical b;dseeamGenv>Me.(16A-6361-$ <.>>d,>

I ad>>~16TF I

(Hopis.or vert.) (Tank,)aekctrd.Heat Ex.)

(L'ltda.scrlalNo.)

($>ate testate No.)

items 4-8 incl. Io be complctc:d for sin lc v:all vessels, jackets of jacketed vrsscls, or shelhs of heat cxchan cfs.

(Kind I Spec. No.)

5. scamst l ong Me

~

WZ.;>Z/16,"

.S.~~~f)

Thickness~

in (itin.ol range apeetrirdl HTt X.R Corrosion

+2ft 3/16 t.'l)oevance~n.

DiamlQ.(t1e-in. Length~ fclQ c>~in.

    • 13ft 3 in. **19ft '2-7/16",

4 rye Il Cia a ~ B)

Girth Weld-Dbl-Butt HTt Y

X.R.

No of Courses

'r

~

6. Heads (a) hlaterial

~ I oeat Ion (Top, bottom, ends)

This koe ~ a Cro<<n Knuckle Radbd ~

Radium E illpcka I

.Ratio

'T1 (b) Material Conlea I Apex Angle Hemispherical Radlua Flat Side to Preaa DLD>ater (Convex or Concave)

(b)

Ocher fascenin If rcmovablc, bolts used (Deacrlbe or ~ ttaeh iineteb)

(Ltatrrlal, Spec. No.. T.S.. Stre, Number) tt

7. ASS)r Closure Wel'd tan ~ draerlbe or sketch)

Pneumatic Hydro F

Cttgtb

~

(Describe ae ogre I weld, bar, ete. II bar give dlnene A

S.

onslructcd for"*

~

F Carp>I pe,~

ea-Sn Ir ~U P

r >I *.r F6'> F, p.

lcecns 9 and )0 to oc cumplcced fur tube sccciuns.

bde

- JJIL>rl (Kind4 Spec. No )

(Subject to ppeaa,)

(cratded, Bolted)

Floating.

Material Diam.

(Kind faSpee No )

in. Thickness

".'Arr eb inches r

Ie-T be*: >I I~1~163 O-D.~

e. ll eb

~>Q or 3 a ~II b r '>16Q T>p (Ku>dta Spa>>

No )

items ll to 14 incl. co be completed for. TITillte~ ChBTnbeZ (Straight or U)

Nominal Corrosion Thickness in. Allotvancc in. Diam.

fc.

in. Length~I.

ia.

e ~ or No)

X.R.

Efficiency (If CI ~ aa B)

13. Hcadst (a) h(atcrial Location Thlekne ~ a No. of Courses H.T.'roarn R ad lus x.a -Gr>mpleae SA 216 (b) Material ~~C T.S 2CL(K!(1(c) hia cc rial TS FLt Side to Prea ~

Die!acier (Conver. or Concave)

Knuckle 'lliptical Conical Hrrniepherlcal Radlu ~

Ratio Apex Angle Radium I

(a) Tof>, bottom, ends (b) Channel (c) Floa ting lfrcmovablc, )bolts used (a)'b)

(Ltetcrlal ~ Spec, Nore T.S, ~ Sire, Number)

(c)

Other fastening (Deaerlbe or ~ttaeh aketcb)

Pneumatic

)4. Constructed fnr sfbccifird H>'drostatic. or Tcsc deSisnP

  • ~A~P*I~ r>I ~

P+$ Q F ~ r r P.ef~

F ~ nebr P, ~>Q>>

p(,-

87DDF min.

I I ~ I other Intrrnal oe ertree>aI pee ~ ~ upra terlth color Ident er copra ~ tuer <<hrn a ppttcabk Stub Barrel (portion of lover shell)

    • Vpper Shell

f P

w'

~

P ()ll'llN.l (hark)

Page 18 of 26

"'6A-634 1-l

'ceuca below to be completed iur all vessel>

where applicable Location r )5) Safety Valve Outlets) Number Site

) ch. Nozzlcs)

Purpose (inlet, Outtrt, Dc ~ in)

Number Diam. or Siss Type 1'1 ~ 1 e ria l Th le lgn c s ~

Prig(. Inlet 1

3~01 2 I.D. ( ((eld SA-216

~23 4

(zz(zzz

. (

(f ~4 (Ztg Feedwa tcr 1

16 3/8 X.D. ~ End SA-336 13/16 (z.

( *p r

  • h(

ho(

. ((o.~$ * ~1" I.. Log

( o K2 Pri(gar Channel tbp gz: ((

aso)

  • . ((o.~S'z 6" ID

(.o,(o Stub Shell

Threaded, No.

Size Loc~tion

~

(g. S ppo<<

1 shi(~L g L g*

0(h (Ye ~ oc No)

(p z

(N z

(Dc s cribs )

Ae in)ore ement Materi ~ l Steel S eel Steel "Steel Head 1

How Act~ c;heel lnte rally Cast lhtelded Mel ded U

er Shell 1'lain supports are Attached nte ra t ith cha Der Dehcre Lc How)

19. Remarks IE C

d w

d d

c ed t meet reouirements b

si ned o f bv the Code e

e t the ass d Insnector must si n off for the latter t

m t

ca e

ield Ass Ens

. below.

All other mf

. is specif on Manufacturers'artial Data orms h"-F'zÃled at thfes'lion n'oUs'e.'ERTI FICATIO.') OF DESIG.'.)

Pa.

Pa.

z(

42788 (n..14088 dc Sn, constcuccion, aod srork-Wc certify chat ihe statements made in this tc:port are correct and thai ail dccacls of material

~ manship of this pressure vessel c:onform to the AS)fE Code for Nuclear Vessels.

Dzic)'z (Manutactucer)

Corp.

Certificate of Authorization Expires N

D Lg inf i

fi) h)es tin house Electric Heat Transf er Division Les ter stress nslyaia report cm Il)e ~ t lh es tin house Electric Hea t Trans fer Division Les ter a..<<.p.,(o...(.. (o.ahcf Ato(zit Po((er Division P,

( s )).Jenhina.Pa.

5 'P '~

(((( g(P 8

Beat Transfer Division,u, t-,zcf.sverley:,.Pa.

i, CERTIFICATE OF SIIOP IXSPECTIOItI VESSEL )LADE BY at 1, thc tmdera)gnedp holding ~ valid cocnmi ~ ~ ion i~ sued by tbe National Board of'Bol)er and Pressure Vessel InsPectors and/or the Si ~ te t

'r Provlnes of d ccnployed by of have Lncpecird the pre'secre vessel described Ln tbla manu!ac)hvar's dat ~ report on Februa '.

'19 70

~ and

~ tace Chal io the best of sny knowledge and banc(, tbe manu!ac)teer bsa constructed thi ~ pressure vessel ln accordance with the ASME Code for Nbc)ear Vessels.

By

~ lgning thi ~ certif)cate neither the inspector nor hl ~ scop)oyer npskrs any warranty, expressed or implied. concerning tbr pressure vessel described ln this manu)securer'a data repoh.Varthermae

~ neither the Jnapector nor hla ecnployer shall bs 1)able in any manner for

~ ny persona) injury or pc eny damage or a loss of agcy kind arising from of connected with thi ~ lnspretlon D i Februa 0-c4 Commis s lorg ~

I apcctopa ggnature g

N "~'~ 43 tate Or rove.nCe

)O CERTIFICATE OF FIELD ASSEiID LY INSPECTIO.'c 1; the undersigned

)ding

~ valid comm)salon

) ~ ~ c)r)f'by thy Nations) Board of Bc)i)er anc(ppressure Vesae) inspectors e/ct/or tbe State f

have compared the't ~ tecnents Ln tbla manufacturer' dat ~ rcport vt)tb ihe described pressure vessel and state that part ~ refenrd to as di~ it ms 7

8 14

~ not included in the ceh)f)cate of shop Jnspeetlon have been inspected by me and that to tice baal of my knowledge and belief thr manufacturer has constructed and assemb)ed thl ~ pressure vaa

~ e) ln accordance with the ASLLE Code for Nuclear Veaar)a The described vessel was inspected and subjected to drost tlc test of ~lg) pal.primary side

& 1356 psi secondary side.

By sign)frc this cchif)cate neither the inspector nog hla rmp)oyrg makes any warranty, expressed or Implied, concerning the pressure ves

~ el described in thJa manufacturer' dst ~ repon Fupthegmopr, nc'Ithrf the ingprecof nor hl ~ emp)oyer shall be liable ln any raanner fcv any'ersonal Jn y or pcopehy damage or a loa ~ of, a)gy kind arising from or connected with this inspect)og<<'

t 19 r

Consol ~ ~ lone ~

e 8

)nappe cur' hggnsccae

+~" or State and lhto.

rintrd in U.S.A- (7/(79)

This Form is oblccinublc from!bc-ASS'lEy 3()5 Ec 47)h Sl., New York, N.Y. )00) 7 hssy.

Closure by Coa)mcrcial Contracting Corp., Detroit, Hichigan

"QNY) 'AlS-2 re ~vi r.=-i O.'.'" 6 '

ii '. Ol<T EOH Ri."PC31 RS OR ii"'P)'C:".'l-'>>'I'

.j 't'.=

i.') OV1.=1Oa)8 OZ ')= ii.>i'!F Cui)&. Si.c. 10)3 XX 2

Plc Iat PCV 8$ $

U.=,K"/

PCZ:ile

))c'r

"'LOR104 PO" "'R

.,XGHT CO.

i)l5 Tl"8 P.O.

iOri:

5? 9 J.UO,"jlh")I, FLORi D~,

331 52 U aili 19 o.

26

. O.

BO'~

3;"iCG iI.0~i0~ CI')'1, Ei.

33u3~

pn/I a

'O. Si- 'cG ac Gr8$ $

')'IS'I'l"G H0'v="8 reaai r oros:.i -..a-'i on jci'so,.etc.

P. O.

!ic.

3.

)s'Dri( PBrfor)a)QQ PX'I"I'-.i6viG."a:

.ac IA)a P

O.

BOX 272"

). ir i: Ia) I.)g 'aa rw Dir. Iai r 3 2 3 0 TVf38 COQB

$ )~a~ oo J.

.~ut):cri zatioII no

xQ iiE'tBAlo v/a

~

J.a. Ili1 'a-1 Caitlarl)

Oar j $tl Iti P."'Su..."',

'J-";

L".'.

)

~

(.

) )'.-):)ll C Ccn truction C

0'=

~C'I'XD4 111 iBG ira 1 l. 1 O ~ )

t ar 0. HQV ~~ i~J o g

'88

( b )

"; ~). g il C r-orIIa ill)'a I i a 1 rr nr) a"'ni'a.~ fa t8

)"=tinIii~

ilo))

i1Oi'I Of

)wctlhg g J Z;PI! IO..)

COI">".)C:)=. a)t ~

1 6:)Fii 1 -.

0' air].a C=~

L'tillzcc fox rl.=')0~~ 1 1 8 Gr r4 I ICi r -.; V I aa C.=!I) a.) 0i I v,all Cn. )i.'rO al~ a"It l( I V ~

~ 'a. J

~)

~

al!O ~

4 a~ J

~

erat '

Aaa ar ~

04)a 1arGI)i-1'CP, ilOIj

'<iiiIi RC:) 'a C:~<r'v y,wg r>I Irar,a

,al ai) ra ra!I Cooe I

'I ~ aliO v Ck f ~

~

(y=-.=-, no)

L'".a'~u1 C -;I'J.O))

~

I

s

~AGE

? G OF 26 FORM NIS-2 s

SEE SUPPLEMENT SHEET, PAGE 21 OF 26

7. Description of work
8. Tests Conducted:

Hydrostatic X

Pneumatic Nominal Operating Pressure Other'ressure 2335 psi Test Temp.

547 F

XCCS YiODIFXCATION TO THE REACTOR PRESSURE VESSEL CLOSURE 9.

Remarks (Applicable Manufacturer's Data Report to be attached)

HEAD, N2 DATA REPORT FOR THE, RVLMS FLANGE ASSEYiBLIES ARE ATTACHED CERTIFICATE OF COMPLIANCE xr or Rep acement

)

8/ru

( wner or wner's Designee)

(Title)

Signed (Date)

To certify that the statements made in this report are correct and this MODXFXCATION conforms to Section XI of the ASYiE Code.

(

Repa CERTIFICATE OF INSPECTION Dat (State or Province, National Board)

I, the Undersigned, holding a valid commission issued by the National Board of Boiler and Pressure.Ves'sel Inspectors and the State or Province of Dade Cty, Fl. employed by of NORWOOD,MASS have.

inspected the MODIFICATION described in this report on Q~~/0, 19'nd state that to the best of my knowledge and belie&'his repair or replacement has been constructed in accordance with Section XI of the ASME Code.

By signing this certificate, neither the Inspector nor his employer takes any warranty.

expressed or implied, concerning the repair or replacement described in this report.

Furthermore neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

DADE CTY.COYiM.N0.4956 g /P/2 W

Commissions FACTORY MUTUAL SYSTEMS (Xnspec< r)

"* ARKNRIGHT BOSTON MFG'S MUTUAL INS.

CO.

I I

I

~

HIS" 2 SUP PL.El'.*E>i"1'A0 SHE;:" T PAGr 21 OF 26 l.

OWNER:

2.

PLANT:

FLORIDA POWER

& LIGHT P.O.

BOX 529100 MIAMI, FLORIDA 33152 TURKEY POINT P.O.

BOX 3088 FLORIDA CITY, FLORIDA 33034 t>wrz:~~~. ~~/+/Q UNIT:

4 3.

WORK PERFORMED BY 4.IDENTIFICATION OF SYSTEM:

WESTINGHOUSE ELECTRIC CORPORATION JOB NO.

PC/M 81-168 P. O.

BOX. 2728 PITTSBURGH, PENNSYLVANIA REACTOR PRESSURE VESSEL HEAD 7.

DESCRIPTION OF WORK:

COMBUSTION ENGINEERING PERFORMED THE DESIGN AND FABRICATION OF THE FLANGE ASSEMBLY.

WESTINGHOUSE ELECTRIC PERFORMED THE INSTALLATION AND WELDING OF THE RVLMS FXANGE ASSEMBLY.

4 COMBUSTION ENGINEERING PERFORMED THE INSTALLATION OF THE INSTRUMENTATION LINES FPL PERFORMED THE HYDROSTATIC PRESSURE TESTS.

This is to accredit CLASS 1 VESSEL PARTS & APPURZBV'i~ & CCH~~~iT SUPPORTS hZ

~x ABOVE LOCATX(N OhLY in accorxhnce with the appticabk ruks of the BoGer and Pressure Vest Code of The Amencan Society of Mechanical Engin(~ The use of the'.

Cock sambo) and the authority granted by tEs cerHFeate ofautho~t'an tl p 'tl s

M~

8 Aw~

pd

'u U' I&III I

bdh*~h'ccordance with the provisxxa of the Bo0er and Pressure Vessel Code of The Amerx~ Society of Mechanical Engine(~

THIS AUTHORIZATIONspires on I

t,~~

~ ~,(

ig )i

'~(D THE AMERlCAN SOC(ETY OF hfEGIANICALENGINEERS Page 22 of 26 Ce(.tifi'cate ofMuthorizatio((

~

~l Nu~~ H -

2OS9

!5]

M r

CCR JUSTICE ZR ~~RZHC XHC.

)

I~.-R'JQZM PRODKTS Mi

- VZESOR

(

~ EAST.VZHDSOR XENJ~lAL PAM EAST VXtiDSOR~

CECA.ACTICOT 060 S8 I

4 l

as authonzed to use the

(

I I

@(mbd of The American Society of Mechar(icaI Engineers fez

(

Jg

+,.

%C5

'cQ 41,

~~$(r burbs on o(

THE AMERICANSOCI ETY OF MECHANICALENG INEERS by the BOILER AND PRESSURE VESSEL COhf MITTEE amirmon 9<~~ 4 S

~

'4 Page 23 of 26 FOIOI 7-rP s IAYUFACT~RS DATA R El'OR T FOR NUCLEAR I~T A%I) Al'PURTERA% CES e

r s

~

As required by the Provisions of the ABIE Cotlc Rules

  • ReV ised 1 1 /1 6/82 I. (a) Xtanufnetured by (b) Xtanufaetured
for,

'Combus tion En ineeri n

- Eas t Hindsor Connec ticut 3

(ttame and r Cdres s of hianufacturer or part)

Florida Power 5 Li ht Turke Point Units 3 5 4

(Name and address of tdanufacturer of completed nuclear conponent) 1 6081 -3 Nat'I Bd. No.

2.

Idenrifiearinn ltanufaeturrr's Serial No. of PaN H A (a) constructed According to Drawl"g No E-IJEST-849-500 Dra 'rng prepared by HuC1 ea r PrpduCtS HanufaCturi ng (b) Description of Parr Inspected RVLHS Fl an e As semb1 Hinter (c) Applicable AS~I E Codet Section III~ Edition~Ha, Addenda date 3980, Case No.~B Class R...k, Final desi n inf rm i

(Brief description of service for which component was dcsiened)

  • . To correct Certificate of'uthorization date Ve certify that the statements made in this report are correct and this vessel part or appurtenance as defined in the Code con-forms to the rules of construction of the ASSI E Code Section III~

{The applicable Design Soecification and Stre ss Report are not the responsibility of the part Manufacturer An appurtenance

) Ianufacturer is responsible for furnishing a separate Design Specification and Stress Report if the app~urt r

ce is nng included in the component Design Specification nnd Stress Rcport.)

////g/g~

Combustion En Inc..

/0/9/

(s anu""<<")M~~zr/~~/~>K. C.

To 1 ides -Hanager of Qual i ty Certificate of Authorization Exptres A ri 1 7

448 1 984 Certificate of Autholipat Ion No I'12084 Co rrt CERTI FICATION OF DESIGN FOR APPURTEAAXCE (tvhen applicable)

Design Information on file at Combustion En i n eri n Stress analysis rcport on file at See 3 remarks Design specifications certified by D. J.

HcLau hl in P *f.E.r.sc t ~T R s.No.~3S5 Stress analysis report certified by See 3 remarks Prof. Eng. State Reg. No.

CERTIFICATE OF SHOP I!ssSPECTIOY I ~ the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors "C~"*"*~f l~

I H

have inspected the part of a prcssure vessel described in this Manufacturer's Partial Data Report on 19~

and state that to the best of my knoo:ledge and belief, the NIanufacturer has constructed this part in accordance with thc AS~IE Code Section III.

By signing rhis c'erti!icate, neither the Inspector nor his employer makes any warranty, cxprcssed or implied, concern-ing the part described in this Xtanufacturer' Partial Data Report.

Furthermore, t ~eitht,r the Inspector not his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

j/g4 Date S

I jlrrz rr)4 a jr tr'r jrjr'

...~Q cC3PO CH N tlIQ N'5 ~,P i

dN

~ Supplemental shNets in form of lists ~ s'ketches or drawings may be used provided (I) stre Is 8'I>" m I I"~ (2) Infocmmtioo in Items IN2 on this dat ~ report I ~ Inc luded srss each sheet

~ ond (2) each sheet is nunsbered and number of sheets is recorded In Item 2 ~ 'Remarks",

o FOIDI tht-2 (back)

. e Page 24 of 26 I-,SI

'l.

h Sl dl

~ IS>

II

    • I*,jch

~ fj cl:

d

    • Is,o *h ll* fh c

h S

SA-479 ype hfominal Corrosion Shell:

Slate real T.'S.

Thickness in. hllowance in.

(Kind 6h Spec. No.) (htin. of Range Spec lficd) 3.760 6IS f>i.I. '

L 81I IL

/A '.

Seams:

I ong H.T.'fficiency 7o Gi<<h 1 Butt Held H T

/A 6.

Heads:

(a) Material T.S.

R.T.

No. of Courses (b) hiaterial (a)

Location (Top, bottom, ends)

C>own Thickness Radius Kr>ucktc Radius El lip t 1 c a i Rat>0 Conical Apex Angle He ml s ph cr 1 c at Radius Flat Side to Pros ~.

Dlamctcr (Conv. or Conc.)

(b)

If removable, bolts used (htatcrfat, Spec Nose T S. ~ Siss, Number)

Other fastening (Describe or attach sketch)

I/A A

8.

Destgn pressure

/

7.

J acket Closure:(Describe as ogre and weld, bar, ctc lfbac glvc dimcnslonss lfbolted, dc sc'ribc or sketch)

Drop V'eight Ch'arpy Impact pst at F

at temp. of ft-lb oF Items 9 and I0 to be completed for tube secttons

/A 9.

Tube Sheetst Stationary. Material (Kind 6> Spec. No.)

Dia.

Thickness in. httachrnent (Sub/act to pressure)

(rc'ctdcds Bolted)

Floating.

) Iarerial Dia.

/A IO. Tubes:

) Iaterial O.D.

in. Thickness Thickness in.

Inches or gage.

Number httachment Type (Str. or U)

Items 11 ldf incl. to be completed for inner chambers of jacketed vessels, or channels of heat exchangers.

No min al Corrosion

11. Shell:

Material TS Thickness ~n.

hllowance in.

Dia.

ft.

in.

Length ft.

in.

(Kind rs Spec. No.) (hlin of Range Spc clficd) 12.

Seams:

Long R.T.

Efficiency 7o Girth

/A 13.

Heads (a) hlaterial H.T.'.S.

R.T.

No..of Courses (b) !Ilatcrial T.S Location Crown Knuckle Elliptical Tluckncss Radius Radius Ratio Conical Apex Angle Hemi sphcrlcal Radius Flat Diameter Side to Press.

(Conv. or Cone.)

(a) Top, bottom, ends (b) Channel If removable, bolts used (a)

(b)

(c)

Design prcssure p.i.1 65O Other fastening (Describe or attach sketch)

Drop V'eight Ch arpy Impact OF at temp. of fr-Ib oF Items below to be completed for all vessels where applicablc.

/A 15.

Safety Valve Outl et st Number

/A 16.

Nozzle;sl Sir.e Location Purpose (Inlet, 0 ut 1 c t, Dral n)

Number Dia. or Site Type htatcrl ~ 1

,Thickness Rcirdorecmcnt hlatcrial How Attached 17.

Inspect ton Openings:

Manhole s, No.

Sire Location H

dh I s,vo.

Sis Loc clo

Threaded, No.

Size Location 18.

Suppc>rtst Sl irt

/A Lugs I.egs Other httachcd (Ycs or No)

(Number)

(Numsbcr)

(Dc scribe)

(Whcrr 6; )iowl t If Postwcld Heat TrcatccL 7 L>st other intr.fhfst or cate>oaf pc ca sure with coincident tcmpcrvtufc when applicvblc.

Pd>neo d >n L'.S.A. (t/72)

Tht>s form (ESOj ss obtain>>btc from thc AShtE 24S E.

C 7th St. ~ Ncw Yoca. N.Y. Iuot

~

4 A

Page c)5 of Z6 FO IDI t -2 ~1:K N UFAC1 i REINS DATA HEI'0 lh'I

~ FOR NUCLFAI P (T A7 D AP PUIITERAACES

~ ~

As u trod by thc Provis,iong of the ASeacIE C Rules

  • ReviSe
t. (a) htanufacturcd by fb) ((Ia nu fa c c u re d foc Combustion En ineerin

- East 1<indsor Connect icut 3 (Namr snd address of Manufactures of part)

F'I orida Polder 8 Li ht Turke Point Units 3

(Nsmr and addyrss of htanadactaayrr of complctcd nuclrar component) 2.

Identification-btanufacturer' Serial iVo. of Pare 1 6081 -4 Yac'I Bd. Yo.

() cn e

dg cod( gl D

i au.E-)JEST-8()9-500 D 'p p

day~no 1

9 d

ring (b) Description of Pare Inspected RVLMS Flan A

mbl ISinter (e) gpp('c bi ggf(SCod

)S tio ni,gdi io ~18, gdd d

d 1

1980, D s uo.~)58 Ci*s*

3 R

k Fi nal desi n i n forma tion and stress reports to be r vid d

(Syirf drscription of scrvlcr for which component was dc signed)

  • To correct Certifi ca te'f Authorization date Date Ccrcificate of Authorization Expires I,"e cercify chat the scatemencs made in chis report are correcc and this vessel pare or appurtenance as defined in the Code con-forrns to che rules of construction of che AebtfE Code Seccion III~

(The applicable Destgn Spccificacion and Scress Report are noc the responsabilicy of che pare ttanufaccurer.

An appurcenance Wtanufaccurer is responsible for furnishing a separate Design Specificacion and Scress Reporc if 'he appbrtgnance is not included in the component Design Specific acion and Stress Reporc.)

s tg,d Combustion En n

s.~~~

~ / <+/c5 (hl nuf csun~~~~/~

C Tp 1 ides Ilanager of qua 1 ity 1OA9

  • Certificace of Authosri sat ion !)Io.

lI trol CERTI FICATI0Ã OF DESI Gib( FOR AP PURTE:bcAa(b CE (when applicable)

Design infotmacion on file at COmbuS tiOn En in Stress analysts reporc on file at See 3 remar k D sign *p cine do s c siii d by~0.

c P i Sg.oSr.e~ Reg.uo.~555 Stress analysis report'cercified by See 3 remarkS Prof Eng Scate Reg. No.

CERTIFICATE OF SHOP I nb SP ECTIOs) s I~'he undersigned, holding a valid commission issued by the bb ation at Board of Boiler and Prcssure Vessel Inspec:tors and/or che Scace or Province of t

and employed by~Hier'aZd~

Hartfor d Connect icut hav inspecced che part of a pressure vessel deccribed in chi s ctanufacturer' Parcial baca Reporc on

~

~

Ig~~

and scale char co che best of my kno<< lc'dge Crg and belief, the ctanu facturer h as'constructed thi s part in accordance erich the AS(stE Code Section III.

By signing this certificare, neither the Inspector nor his t:rnployer mat:cs any <<.arrancyp expr'essed or itnplied, concern-ing the part described in chis ~tanufaccurer' Parcial Daca Reporc.

Furthermore, t.eicher the Inspector nor his enployer shall be liable in any manner for any personal injury or propercy damage or a loss of any kind arcsing from or connected

<<ich this inspection.

I I/ y g g'g Date inspector's Signatug 33(>>eCH I (3 National Board, State, Province snd ho.

>>upplrmrntal sheets ln form of lists ~ skrtchrs or drawings msy be used providrd (I) ~ isr ts 6vg" x I I"~ (2) Infogmatton in ttrms I 2 on chls daas rcport as 'Inctudrd on each shrrt ~ snd (2) rarh shg rt ls numbrgrd and numbrp of sheets is gccogdrd In Item 6 ~ "Rg masks",

~ 4 I

~

t g,.I V

L

~ h FORII Yi-'2 (back)

Page 26 of 26 Items d(-Stint<I.sco be complcced for single wall vessels, jackets of jacketed vessels, or shells of heat ex<<hangers 5A-479. Ty'pe 316 5. 5T.

76 g5 [ Yominal

. 6OP Corrosion Q

"dL Shell:

Slatcrial TS.

Thick i

AO c

i Oi.=i.2 IfcOL ih-i, ~>

(Kind Ch Spec. No.) (Min.of Range Specified)

H/A S.

SeSmsr Long

<<I.T.'

<eh~Mt Meld <<I.T

'/A 6.

<<leads:

(a) hlateriai T

S'.T.

R.T.

Effi<<'iency Yo. of Courses (b) klaterial T.S.

(a)

Location (Top, bottom. <<nds)

Cro~n Thickness Radius Knuckle Radius Ellipticsl Conical Ratio

'pex Angle Hemispherical Radius Flat Diameter Side to Press.

(Conv. or Conc.)

(b)

If remo vabl e, bolt s used (Material, Spec No. ~ T,S., Slee, }cumber)

Ocher fastening (Describe or attach sketch)

H/A H/A 8.

Design pressure

7. jackec Closure. ',Describe as ogee and weld, bar, ete. Ifbar give dimensions, lfbolted, describe or 8'ketch)

Drop tt'eight Charpy Impacc psi ac F

ac'cemp. of fc-lb OF Icerns 9 and 10 co be compleced for cube sections g/A 9.,Tube Sheecsc Stacionary.

) Iaterial (Kind cs Spec. No.)

Floating.

h1acerial g/A 10.

Tubes:

Material O.D.

in.

(<veld<<do BOlted)

Thickness Thickness in.

hccachmenc inches or gage.

Yu<nber T)'pe (Str. or U)

Dia.

Thickness in.

httachmenc (Subject to pressure)

Items II-ldfincl. co be compleccd for inner chambers of jacketed vessels, or chnnnels of heat exchangers.

Nominal Corrosion 11.

Shell:

Material T.S.

Thickness ~n.

hllo>> ance in.

Dia.

fc.

in.

Length fc.

in.

(Kind ra Spec. No.) (Min. of Range Specified) 12.

Se am sl Lon g H.T.'.T.'fficiency

~oIp Girth t)/A 13.

Heads (a) ) Iacerial H.T'S R.T.

Yo. of Courses (b) )hlacerial T.S.

Location Crown Knuckle Elliptical T}dckness Radius Radius Ratio Conical Hemispherical Apex Angle Radius Flat Diameter Side to Press.

(Conv. or Conc.)

"(a) Top, boccom, <:nds (b) Channel It removable, bolts used (a) 14.

Design pressure (b) ps< at (c)

Other fast<:ning fDescribe or attach sketch)

Drop tueight Charpy Irnpaec F

at temp. of ft-lb OF'tems below to be completed for all vessels>>'here applicable.

H/A 15.

Safecy Valve Outl erst Numbe~

H/A 16.

Yozzles:

Purpose (Inlet, Out let, Drsin)

Number Size Dls. or Site

'ype Location htaterial Thickness Reinfopeement

'ai eris}

How Attached N/A 17.

Inspection Xlanholcsp iVo.

Size Locacion Op i

Sot:

ii dh i..N Sic.

Location Threa<loci, Yn.

Sic i.o N/<< ii.

8 ppo (. i Ski L 8*

L 8.-..

O<h 8

.chcd (Yc o o< Nu)

(Numb.r)

(Nvrbri)

(De <.ribr)

(<chere b }tOw) lf Postw rid ilrai T p>>io< rcl.

8 List other lnte:nal ur 8 stria.cl pressure with coincident

<em<pep>><upc when>>pptie>>hlr.

Thl ~ fOrm (ESO} is Oh<chin,ihip fr>><a <tip'sk<}:o <8$ E. S.ih St, ~ Nd~ YO<ko h,Y. lOot, Piin<rd in t:.S.A. (1 'lc}

4 w J I

1