ML17348B320

Turkey Point Plant,Unit 3,ISI Summary Rept Second Interval, Third Period,First Outage (1991) Class 1,All Status Components.

ML17348B320
Person / Time
Site:	Turkey Point
Issue date:	12/05/1991
From:	FLORIDA POWER & LIGHT CO.
To:
References
NUDOCS 9201080232
Download: ML17348B320 (332)

Text

DATE: 12/05/91 REVISION: 'I TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 1=ACI'OR PRESSURE VESSEL ZONE HUHBER: 001

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC~Xl CATGY ITEM NO EXAM METHOD PROCEDURE H I 0 ONGT RSEH E I 0 E REMARKS C G H R**CALIBRATION BLOCK**3PSRV1 REF.DWG.NO.3-V01 000100 3-WR-18 FLANGE TO UPPER SHELL CTMT, 58'EVEL 8-A 81.30 UT 0 UT 45 UT 45T UT 60 UT 60T UT 50/70 UT 50/70T TKY-AUT TKY-AUT TKY-AUT TKY-AUT TKY-AUT TKY-AUT TKY AUI'5/0 15/0 15/0 15/0 15/0 15/0 15/0 1/11/91-PERFORMED BY SWRI(EXAMS 33, 34R, 35R, 36R, 37, 38, AND 39;LIHITEO EXAH DUE TO FLANGE**UZ 1**000200 3-WR-33 UPPER SHELL TO INTERMEDIATE SHELL CTMTN 58'EVEL 8-A 81.11 UT 0 Ur 45 UT 45T UT 60 UT 60T UT 50/70 UT 50/70T TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 1/11/91 EXAHS 25, 26, 27, 28, 29, 30, 31, AND 32: EXAMS 25A, 27A, 28A, 29A, 30A, 31A AND 32A RUN DUETO FAILED CALIBRATION CHECK**UT 1**0300 3-WR-10 INTERMEDIATE SHELL TO LOWER SHELL CTMT, 58 LEVEL 8-A 81.11 UT 0 UT 45 UT 45T UT 60 UT 60T UT 50/70 UT 50/70T TKY-AUT TKY-AUI'KY-AUT TKY AUT TKY AUT TKY-AUT TKY-AUT 15/0 15/0 15/0 15/0 15/0 15/0 15/0 1/11/91-PERFORMED BY SWRI, EXAMS 17, 18, 19, 20, 21, 22, 23, AND 24**UT 1**000400 3-WR-31 8-A LOWER SHELL TO LOWER HEAD RING 81.21 CTHT, 58'EVEL UT 0 UT 45 Ul'5T UT 60 UT 60T UT 50/70 UT 50/70T TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0'/11/91

-EXAM PERFORHED BY SWRI, EXAHS 9, 10,'IOA, 11, 12, 12A, 13, 13A, 14, 15, 16, AND 16AI LIMITED EXAH DUE TO ANTIROTATION LUGS**UT 1>>*000500 3-WR-9 8-A LOWER HEAD RING TO 80'TTOM HEAD 81.21 CTMT, 58'EVEL UT 0 UT 45 UT 45T UT 60 UT 60T UT 50/70 UT 50/70T TKY-AUT TKY-AUT TKY-AUT TKY-AUT TKY-AUT TKY-AUT TKY-AUT 15/0 15/0 15/0 15/0 15/0 15/0 15/0 1/8/91-PERFORMED BY SWRI, EXAHS 1, 2, 3, 4, 5, 5A, 6, 7, 8, AND BA;LIHITED EXAM DUE TO INSTRUHENTATIOH TUBES<<*UT-1, UT-3*>>9201080232 911205 PDR ADOCK 05000251 9

DATE: 12/05/91 REVI SION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPOHENTS PAGE: 2 EACTOR PRESSURE VESSEL ZONE NUMBER: 001

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATION BLOCK**3PSRV1 REF.OWG.NO.3-V04 000600 3-DI-A IHLEj'OZZLE TO SHELL 9 80 DEG.cTMT, 58'EYEL 8-D 83.90 UT 0 UT 5 UT 45 UT 45T UT 60T UT 50/70 UT 50/70T TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-Aur 15/0 C X-X-X-X---**UT-1(UT-15, UT-32**X-X-1/11/91-PERFORMED BY SWRI, EXAMS 42(43R, AND 54, GEOMETRIC REFLECTOR FROM X-THE NOZZLE SUPPORT LUG 000700 3.DO-A OUTLET NOZZLE TO SHELL 9 130 DEG.CTMT, 58'EVEL B-D 83.90 UT 0 Ur 45 UT 45T UT 60T UT 50/70 UT 50/70T TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 A X---1/11/91-PERFORMED BY SMRI(EXAMS 44,-,X-45, AHD 56]LIMITED EXAM DUE TO INTEGRAL X---EXTEHSIOHI SUPPORT LUG AHD INTEGRAL X---EXTENSION GEOMETRY X---**UT-1(Ul'5(UT-32**X-t 000800 3-DI-C INLET NOZZLE TO SHELL 9 200 DEG.CTMT, 58'EVEL 8-D 83.90 UT 0 UT 5 Ur 45 UT 45T UT 60T Ur 50/70 UT 50/70T TKY-AUT TKY-AUT TKY-AUT TKY AUT TKY AUT TKY-AUT TKY-AUT 15/0 15/0 15/0 15/0 15/0 15/0 15/0 C X-X--X X-X-X-X 01/91-PERFORMED BY SMRI, EXAMS 46, 47 AND 58)NOZZLE SUPPORT LUG GEOMETRY**UT-1, UT-15, UT-32**000900 3-DO.C OUTLET HOZZLE TO SHELL 9 250 DEG.CTMT, 58'EVEL 8 D 83.90 UT 0 UT 45 UT 45T UT 60T UT 50/70 Ur 50/70T TKY-AUT 15/0 TKY-AUT 15/0 TKY.AUT 15/0 TKY AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 A X---1/11/91-PERFORMED BY SMRI, EXAMS 48,--X 49, AND 60;INTEGRAL EXTENSION AHD X--SUPPORT LUG GEOMETRY'IMITED EXAM DUE, X---TO INTEGRAL EXTENSION X---**UT-1, UT-15, UT-32**X-001000 3-DI-B INLET NOZZLE TO SHELL 9 320 DEG.CTMT, 58'EVEL B.D 83.90.Ur 0 UT 5 UT 45 ur 45r UT 60T UT 50/70 Ur 50/70T TKY AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 C X---1/11/91-PERFORMED BY SMRI, EXAMS 50, X---51, AND 62;HOZ2LE SUPPORT LUG GEOMETRY--X-X---X---**Ur-1, Ur-15, UT-32**X-X---

DATE: 12/05/91 REVISION: 1 ACTOR PRESSURE VESSEL TURKEY POIHT HUCLEAR PLANI'NIT 3 INSERVICE INSPECI'IOH SUHMARY REPORT SECOND IH'IERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPOHENTS PAGE: 3 ZONE NUMBER: 001 SUHMARY EXAMINAT I OH AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R>>>>CALIBRATION BLOCK*" 3PSRV1 REF.DWG.NO.3-V04 001100 3.DO.B OUI'LET NOZZLE TO SHELL 9 10 DEG.CTMT, 58'EVEL 8 0 83.90 Ul'Ul'5 UT 45T UT 601'T 50/70 UT 50/70T TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUT 15/0 TKY-AUI'5/0 TKY-AUT 15/0 TKY-AUT'15/0 A X---1/11/91-PERFORMED BY SWRI, EXAMS 40I-X-41, AND 52;LIMITED EXAH DUE TO IHTEGRAL X---EXTENSION, NOZZLE SUPPORT LUG GEOMETRY X-X--->>>>UT-1)UT-15, UT-32**X---001200 3-DI-A-IRS INLET NOZZLE INNER RADIUS CTMT, 58'EVEL B-D UT 50/70 TKY-AUT 15/0 C X---1/8/91-PERFORHED BY SWRI, EXAMS 55 AND 83.100 64**UT-32*>>001300 3-DO.A-IRS OUTLET NOZZLE IHHER RADIUS CTMT, 58'EVEL 8-D UT 50/70 TKY-AUT 15/0 A X---1/6/91-PERFORHED BY SWRII EXAM 57 83.100<<*UT-32*>>001400 3-DI-C-IRS IHLET NOZZLE IHNER RADIUS CTHT, 58'EVEL 8-D UT 50/70 TKY-AUT 15/0 C X---1/8/91-PERFORMED BY SWRI, EXAMS 59 AND 83.100 65**UT 32*>>001500 3.DO-C-IRS OUTLET NOZZLE INNER RADIUS CTHT, 58'EVEL 8-D UT 50/70 TKY-AUT 15/0 A X---1/6/91-PERFORMED BY SWRI, EXAM 61 83.100 TKY-AUT15>>>>UT 32>>>>001600 3-Dl-8-IRS INLET NOZZLE INNER RADIUS CTMT~58'EVEL 8-D UT 50/70 TKY-AUT 15/0 B3.100 C X--1/8/91-PERFORMED BY SWRII EXAMS 63 AND 66**UT-32*>>001700 3-DO-8-IRS OUTLET NOZZLE INNER RADIUS CTMT, 58'EVEL 8-D UT 50/70 TKY-AUT 15/0 A X---1/6/91-PERFORHED BY SWRI, EXAH 53 83.100 TKY-AUT15**UT-32**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UHIT 3 IHSERVICE INSPECTION SUHHARY REPORT SECOND INTERVAL,'HIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COHPONENTS PAGE: 4 ACTOR PRESSURE VESSEL ZOHE NUMBER: 001 SUMHAR'Y EXAHINATIOH AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**INTERIOR OF REACTOR VESSEL REF.DIJG.NO.3-V01 002100 VESSEL INSTRUHENTAT ION PENETRATIONS CTMT, 58'EVEL 8-N-1 VT-3 813.10 IS I-88 C X---1/91-VT COMPLETE, EXAMINED 100K OF PENETRATIONS

• • N/A**002200 RPV OUT NOZ TO CORE BARREL IR HATTING SU CTMTg 58 LEVEL 8-N-1 Vr-3 I Sl-88 813.10 C X---1/91-VT COMPLETE(EXAMINED NOZZLES AT.10, 130, AND 250 DEGREES**N/A4*002500 RPV INLET HOZZLE IHNER RADIUS CTMT, 58'EVEL 8-N-1 B13.10 VT-3 IS l-88 C X---1/91-VT COMPLETE, EXAMINED NOZZLES AT 80, 200, AND 320 DEGREES 2800 VESSEL BOTTOM CTMT~58'EVEL B-N-1 Vl'-3 813.10 I Sl-88 C X---1/91-VT COMPLETE, EXAMINED 100X OF BOTTOM**N/A**003000 RV TO HEAD MATING SURFACE ON VESSEL CTMT, 58'EVEL 8-N-1 VT.3 813.10 I S I-88 C X---1/91-VT COMPLETE(EXAHINED 100X OF SURFACE*~N/A>>" 003100 REACTOR VESSEL RADIAL SUPPORT KEYNAYS CTHT, 58'EVEL 8-N-2 VT.3 I Sl-88 8'13.31 C X---'/91-VT COHPLETE, EXAMINED KEYNAYS AT 0, 90, 180, AND 270 DEGREES, LIGHT RUB MARKS AT 90 DEGREES f~N/A~*003500 THERMOCOUPLES, CONNECTIONS 8-H-3 VT-3 SUPPORT INST B13.32 CTH'I, 58'EVEL ISI-88 C X---1/91-VT COMPLETE, EXAMINED THERMOCOUPLE CONDUITS AT 59, 149, 239, AND 329 DEGREES 4*N/Ak*

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3" INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRSl'UTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 5 ACTOR PRESSURE VESSEL ZONE NUMBER: 001

SUMMARY

EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R~*CALIBRATION BLOCK**INTERIOR OF REACTOR VESSEL REF.DUG.NO.3-V01 003900 INSTRUMENTATION COLUMNS CTMT, 58'EVEL B-H-3 VT-3 I S I-88 813.32 C X---1/91-VT COMPLETE(EXAMINED COLUMHS AT 59, 149, 239, AND 329 DEGREES**H/A~>>004300 UPPER SUPPORT PLATE KEYHAYS 8-N-3 VT-3 ISI.BB 813.32 CTMT, 58'EVEL C X---1/91-VT COMPLETE, EXAMINED ALL LOCATIONS**H/A~*004700 FLOH MIXER DEVICES AHD FASTENERS CTMT, 58'EVEL 8-N-3 VT.3 813.32 IS I-88 C X---1/91-VT COMPLETE)EXAMINED ENTIRE 360 DEGREES**H/A**005'100 SUPPORT COLUMNS AND FASTENERS 8-H-3 VT-3 813.32 CTMT, 58'EVEL IS l-88 C X--1/91-VT COMPLETE, EXAMINED ENTIRE 360 DEGREES~~H/A~*INTERIOR OF REACTOR VESSEL REF.DNG.NO.3-V01 005500 GUIDE TUBES (EXTERIOR ONLY)8 H-3 VT-3 AHD FASTENERS 813.32 CTMT, 58'EVEL IS I.BB C X---1/91-VT COMPLETE, EXAMINED ENTIRE 360 DEGREES<<*N/A**RPV CORE SUPPORT STRUCTURE REF.DWG.HO.003-V01 005900 UPPER CORE PLATE AND FUEL B.N-3 VT-3 ISI.BB ASSEMBLY GUIDE PINS 813.32 CTMT C X---1/91-VT COMPLETE, EXAMINED ENTIRE 360 DEGREES**H/A**

DATE: 12/05/91 REVISION: 1 EACTOR PRESSURE VESSEL TURKEY POINT HUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COHPONEHTS PAGE: 6 ZOHE HUHBER: 001

SUMMARY

EXAHIHATIOH AREA NUMBER IDENT I F ICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I O,E REHARKS T C G M R**CALIBRATIOH BLOCK**INTERIOR OF REACTOR VESSEL REF.DWG.NO.3-V01 006300 UPPER CORE PLATE ALIGN.KEYWAYS AHD FASTEN CTHT, 58'EVEL 8-N-3 VT-3 ISI-BB 813.32 C X---1/91-VT COHPLETE, EXAHINED KEYWAYS AT 0, 90, 180, AND 270 DEGREES, LIGHT RUB HARKS**N/A**006800 UPPER CORE PLATE CTHT, 58'EVEL 8-H-3 VT-3 813.32 IS I-BB C X---1/91-VT COHPLETE, EXAHIHED ENTIRE 360 DEGREES*~H/A**007200 CORE BARREL FLAHGE FLOW NOZZLES CTHT, 58'EVEL 8-N-3 VT-3 ISI 88 813.32 C X---1/91-VT COHPLETE, EXAHIHED ENTIRE 360 DEGREES**H/AA*07600 CORE BARREL AHD VESSEL HEAD ALIGN.PINS CTHT, 58'EVEL 8-N-3 VT-3 813.32 IS I-88 C X---1/91-VT COHPLETE, EXAMINED ALL LOCAT I OH S a*N/Aoa 008000 FLANGE TO UPPER BARREL WELD B-N-3 VT-3 ISI.88 813.32 CTHT, 58'EVEL C X---1/91-VT COHPLETE, EXAHIHED ENTIRE 360 DEGREES OF'WELD**N/A**008800 UPPER CORE PLATE ALIGNMENT B.N-3 VT-3 ISI-88 KEYS IH CORE BARREL 813.32 CTMT, 58'EVEL C X--1/91-VT COHPLETE, EXAHIHED KEYS AT 0, 90, 180, AND 270 DEGREES, LIGHT RUB HARKS**H/A**009200 BAFFLE BOLTS AND LOCKING DEVICES IH TOP TWO ROWS OF FORMERS CTMT, 58'EVEL 8-N-3 VT-3 813.32 IS I-BB C X--1/91-COHPLETE, EXAHIHED ENTIRE 360 DEGREES OF BOLTIHG AND LOCKING DEVICES**H/A'k*

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORI'ECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 7 ACTOR PRESSURE VESSEL ZOHE NUMBER: 001

SUMMARY

EXAMINATION AREA HUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R ,**CALIBRATIOH BLOCK**INTERIOR OF REACTOR VESSEL REF.DMG.HO.3-V01 009600 LONER CORE PLATE FOR DEBRIS 8-N-3 VT-3 ISI-88 813.32 CTMT, 58'EVEL C X---1/91-VT COMPLETE, EXAMINED 100K OF PLATE**H/A**

DATE: 12/05/91 REVISIOH: 1 ACTOR PRESSURE VESSEL DETAIL TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 8 ZONE NUMBER: 001

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE HI, 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**INTERIOR OF REACTOR VESSEL REF.DWG.HO.3-V01 009700 LOWER CORE PLATE SUPPORT COLUMN BOLTIHG CTMT, 58'EVEL 8-N-3 VT-3 813.32 IS l-88 C X---1/91-VT COMPLETE, EXAMINED ALL BOLTING**M/A**

DATE: 12/05/91 REVISIOH: 1 ACTOR PRESSURE VESSEL TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 9 ZOHE NUMBER: 001

SUMMARY

EXAMINATION AREA HUMBER IDENTIFICATIOH ASME SEC.XI CATGY EXAM ITEM No METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**INTERIOR OF REACTOR VESSEL REF.DWG.NO.3-V01 010100 LOMER CORE PLATE INSTRUMEHTA-8-H-3 VT-3 TIOH GUIDE TUBE NUTS 813.32 CTMT, 58'EVEL I S1-88, C C 1/91-VT COMPLETE, EXAMINED ENTIRE 360 DEGREES OF HUTS<<<<H/A<<<<010500 LONER CORE PLATE ACCESS COVER 8-N-3 VT 3 BOLT IHG 813.32 CTMT 58'EVEL I S1-88 C C 1/91-VT COMPLETE, EXAMINED 100X OF BOLT IHG**H/A**010600 LSIER CORE PLATE FUEL ASSEMBLY 8-N-3 VT-3 GUIDE PINS 813.32 CTM'1, 58'EVEL I S1-88 C X---1/91-VT COMPLETE(EXAMINED ENTIRE 360 DEGREES OF PINS**H/A<<*t 1000 IRRADIATION SPECIMEN BASKET ATTACHMENT TELOS CTMT, 58'EVEL 8-N-2 VT-3 ISI-88 813.30 C X---1/9'I-VT COMPLETE, EXAMINED MELDS AT 30, 40, 50, 150, 230, 270, 280, AND 290 DEGREES**H/A<<*O1180O OUTLET NOZZLE TO VESSEL INTERFACE SURFACES CTMT, 58'EVEL 8-H-3 VT-3 ISI-88 813.32 C X---1/91-VT COMPLETE, EXAMINED NOZZLE SURFACES AT 10, 130, AND 250 DEGREES**H/A<<*012200 CORE BARREL RADIAL SUPPORT 8-H-3 VT-3 ISI-88 KEYS 813.32 CTMT, 58'EVEL C X--1/91 VT COMPLETE, EXAMINED KEYS AT 0, 90, 180, AND 270 DEGREES**H/A**012600 SECONDARY CORE SUPPORT STRUCTURE CTMT, 58'EVEL 8-H-3 VT-3 I Sl-ee 813.32 C X--.1/91.VT COMPLETE, EXAMINED ENTIRE 360 DEGREES OF STRUCTURE**H/A<<*

DATE: 12/05/91 REVISION: 1 EAC'TOR PRESSURE VESSEL TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 10 ZONE NUMBER: 001 SUHMARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**INTERIOR OF REACTOR VESSEL REF.D'LIG.NO.3-V01 013000 THERMAL SHIELD TO CORE BARREL 8 H-3 ATTACHMENTS AT BOTTOM 813.32 (FLEXURE)CTMT, 58'EVEL VT-3 IS I-BB C X---1/91-VT COMPLETE, EXAHINED BOTTOM ATTACHMENTS AT 35, 90, 140, 210, 270, AND 330 DEGREES*IN/A**

DATE: 12/05/91 REVISION: 1 ACTOR SSEL CLOSURE HEAD TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 11 ZONE NUMBER: 002 SUHMARY EXAHINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**3PSRV1 REF.DUG.NO.3-V02 014500 3-NN-12 FLANGE TO DOME IIELD CTMT, 58'EVEL 8-A 81.40 MT HT HT UT 0 UT 45 UT 45T UT 60 UT 60T UT 0 CNR NCR Pl%NDE 2.2.126 C NDE 2.2-132 91-1007 NDE 5~14-3 NDE 5.14-3 NDE 5.14-3 NDE 5.14-3 NDE 5.14-3 NDE 5.18.13 91-3-052 N91.0372 HA910403093259

-X X-X-X-X-X-X.X X-3/18/91-HT COMPLETE, SEVERAL LINEAR INDICATIONS;3/18/91

-UT COMPLETE EXAHINED FROM STUD HOLE 12 TO STUD KOLE 30;4/26/91-MT RE-EXAH COMPLETE, INDICATIONS REMOVED BY GRINDING**UT 2**REACTOR VESSEL INTERIOR REF.DWG.NO.003-V01 014505 VESSEL TO CLOSURE HEAD HATING B H-1 VT-3 t SURFACE ON HEAD B13.10 CNR CTHT NCR NDE 4.3-294 91-3-060 90-120 C---X 8/26/91-VT COHPLETE, HECNANICAL DAHAGE FROH STUD HOLE 38 THROUGH 41, FOUND DURING PREVIOUS OUTAGES, NCR 90-120 ACCEPTS AS-IS<<*N/A~*SYSTEM NO.43 BOLTING REF.DWG.NO.003-V12 014520 3-CH-S-41 THRU 58 RPV STUDS CTMT 8-G-1 UT 60 86.30 VT-1 HT NDE 5.7-12 NDE 4.1-153 NDE 2.2-130.C X---3/19/91-UT COHPLETE;3/20/91-VT X--.COMPLETE;3/21/91-HT COMPLETE, X-EXMAINED STUDS 41 THROUGH 58 10UT 11**014525 EXTRA STUDS RPV STUDS CTMT 8 G-1 86.30 MT MT MT HT UT 60 UT 60 UT 60 UT 60 NDE 2.2-133 NDE 2.2-134 NDE 2.2-135 NDE 2.2-136 NDE 5.7-16 NDE 5.7-17 NDE 5.7-18 NDE 5.7-19 A X-X-X--X-X-X-X X-9/3/91-MT AND UI'OMPLETE ON STUDS F-18 AND K-22, 9/4/91-MT AND UT COHPLETE ON STUDS E-15 AND E-17, 9/5/91-HT AND UT COMPLETED ON STUDS A-2, A-4, A9)8 5C 11'13~F19)G20)H21

~M-23, AND M-24(BASELINE EXAHINATIONS

• • UT-11**

DATE: 12/05/91 REVISION: 1 EACTOR PRESSURE VESSEL CLOSURE HEAD TURKEY POIHT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 12 ZONE NUMBER: 002

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO ME'THDD PROCEDURE H I S OHG T RSE A E I 0 T CGM E REMARKS R**GAL I BRAT ION BLOCK**SYSTEM NO.43 BOLTING REF.DWG.NO.003-V12 014540 3-CH.N-41 THRU 58 RPV NUTS CTMT 8-G-1 MT B6.10 UT 45 HDE 2.2-129 NDE 5.10-7 C X--X--3/21/91-MT AHD UT COMPLETE, EXAMINED NUTS 41 THROUGH 58**UT 25**014560 3-CH-LW-41 THRU 58 RPV LARGE WASHERS CTMT 8-G-1 VT-1 86.50 HDE 4.1-154 C X---3/20/91-VT COMPLETE(EXAMINED WASHERS 41 THROUGH 58**N/A**014580 3-CH-SW.41 THRU 58 RPV SMALL WASHERS CTMT B-G 1 VT-1 86.50 HDE 4.1-155 C X---3/20/91-VT COMPLETE)EXAMINED SMALL'WASHERS 41 THROUGH 58**k/A**

~DATE: 12/05/91 REVISION: 1 EAM GENERATOR C PRIMARY SIDE TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION SUMHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 13 ZONE NUMBER: 005

SUMMARY

EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*~REF.DWG.NO.3-V09C 041510 3-SGC-SL-1 THRU 4 SUPPORT LEGS F A F1.10 VT-3 CNR NDE 4.3-283 91-3.057 C---X 3/21/91-VT COMPLETE, EVIDENCE OF MOVEMENT BY ELONGATED HOLE, CHIPPED CONCRETE, ACCEPTED AS-IS BY EHGIHEERIHGg ELONGATED HOLE IS PART OF DESIGH**N/A**

DATE: 12/05/91 REVISION: 1 RESSURIZER MELD LOCATIONS TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 14 ZONE NUMBER: 006

SUMMARY

EXAMINATION AREA HUHBER IDEHTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM NO.41 REF.DWG.NO.3-V05 042000 04-PRZ-SUPPORT PRESSURIZER VESSEL SUPPORT CTMT F-A VT-3 F1.10 NDE 4.3-234 C X---2/11/91-VT COMPLETE**H/A**042100 03-PCW.4 HEAD TO LONER SHELL CTMT 8-B B2.11 UT 0 UT 45 Ur CSV UT 60 Ur 6OT HDE 5.1-36 HDE 5.1-36 NDE 5.1-36 HDE 5.1-36 HDE 5.1-36 C X---2/26/91-UT COMPLETE, LIMITED X--EXAMIHATION DUE TO 1" PIPING X---, (INSTRUMENTATION)

AHD LUGS ABOVE AHD X---BELOM MELD X---**UT-8**042200 03-PLW-3 L(NER SHELL LONG SEAM CTMT B-8 B2.12 UT 0 UT 45 UT 45T UT 60 UT 60T HDE 5.1-35 HDE 5.1-35 HDE 5.1-35 NDE 5.1-35 NDE 5.1-35 C X-X-X-X-X-2/26/91-UT COMPLETE, 12 INCHES OF LONG SEAM EXAMIHED**U T 6**SYSTEM NO.41 REF.DUG.NO.3-V06 043100 RV-03-551B-I R SAFETY NOZZLE INNER RADIUS SECTION B D UT 60 B3~120 HDE 5.13-11 C X---2/11/91-UT COMPLETE**Uv B*A DATE: 12/05/91 REVISIOH: 1-ACTOR TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUHMARY REPORT SECOND INTERVAL, THIRD PERICO, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS OOP A IN'TERMEDIATE LEG PAGE: 15 ZONE NUMBER: 007 SUMHARY EXAMINATION AREA HUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEH NO HETHCO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**SYSTEM NO.41 5613-P-766-S SH.1 OF 1 REF.DUG.NO.3-A01 044500 31"-RCS-1301-10 ELBOW TO PUHP CASING CTHT 8-J B9.11 PT NDE 3.3-380 UT 45 NDE 5'-23 UT 45T NDE 5'-23 C X---3/13/91-PT COMPLETEI FAINT INDICATIONS

-X-AT TOES OF MELD, 360 DEGREES X---INTERHITTENT, DETERHIHED TO BE NON-RELEVANT) 3/14/91-UT COMPLETE, ROOT GEOMETRY**UT-26**

DATE: 12/05/91 REVISION: 1 EAC TEM LOOP A NOT LEG TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVALED THIRD PER IDDEN FIRST OUTAGE (1991>CLASS 1 ALL STATUS COMPONENTS PAGE: 16 ZOHE NUMBER: 008

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME'EC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM NO.41 5613-P-766-S SH.1 OF 1 REF.DWG.NO.3-A02 044700 29"-RCS-1304-1 RPV NOZZLE TO PIPE CTMT 8-F 85.10 UT 0 UT 45 UT 45RL UT 45RLT UT 50/70 UT 50/70T TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 A X---1/11/91-PERFORMED BY SWRI, EXAMS 69(-X-75, 81, 81S, AHD 87, WELD METAL/-X-INCONEL/BASE MATERIAL GEOMETRY-X-X---**UT-32*>>X---044800 294-RCS-1304-2 PIPE TO PIPE CTMI', 25'8" 8-J 89.11 PT UT 45 UT 45T HDE 3.3-383 NDE 5.5 25 NDE 5.5 25 C X---3/19/91-PT COMPLETE, HOH-RELEVAHT

-X-INDICATIONS CAUSED BY GRINDING MARKS(UT X---COHPLETE, ROOT GEOMETRY**UT-12(UT-46**044900 2"-RCS-1304.BC-2 2" BRAHCH COHHECTIOH TO 2"-Sl-1305 8-J PT 89.32 NDE 3.3 383 C X---3/19/91-PT COMPLETE 41N/A*4 DATE: 12/05/9'I REVISION: 1 ACTOR EM LOOP A COLD LEG TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 17 ZONE NUMBER: 009

SUMMARY

EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO HETHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R"*CALIBRATIOH BLOCK**SYSTEM NO.41 5613-P-766-S SH.1 OF 1 REF.DWG.NO.3-A03 045500 2"-RCS-1307-8C-1 2" 2" BRANCH CONNECTION CTMT, 25'8" 8-J PT 89.32 NDE 3.3-379 C X---3/13/91-PT COHPLETE**N/A**045700 10"-RCS-1307-8C-2 BRANCH CONHECTION TO 10" SI-1301 CTMT, 25'8" 8-J PT NDE 3.3-379 C X---3/13/91-PT AND UT COMPLETE, INHER 89.31 UT 45 NDE 5.5-22-X-RADIUS GEOHETRY Uj'5T HDE 5.5-22 X--**UT-12(UT-46~*I 045800 3"-RCS-1307-BC-3 BRANCH COHHECTION TO 3" CH-1302 CTMT, 25'84 8-J PT 89.32 NDE 3.3-379 C X---3/13/91-PT COMPLETE**N/A**046000 27.5"-RCS-1307.14 ELBOH TO NOZZLE CTMT, 25iS<<8-F 85.10 UT 0 TKY-AUT 14/0 UT 50/70 TKY-AUT 14/0 UT 50/70T TKY-AUT 14/0 P X---=1/11/91 PERFORMED BY SKI, EXAMS 68 X---AND 74I SURFACE EXAM TO BE PERFORMED X---NEXT OUTAGE~~UT-32**

DATE: 12/05/91 REVISION: ACTOR TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECI'IOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OU'TAGE (1991)CLASS 1 ALL STATUS COMPOHEHTS OOP B INTERMEDIATE LEG PAGE: 18 ZONE NUMBER: 010

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM HO.41 5614-P-766-S SH.1 OF 2 REF.DWG.NO.3-A04 046900 314-RCS-1302-10 ELBOW TO PUHP CASING CTMT, 17.0833'-J PT NDE 3.3.381 89.1'I UT 45 NDE 5'-24 UT 45T NDE 5.5-24 C X---3/15/91-PT COMPLETE(NON-RELEVANT

-X-INDICATIONS AT TOE OF WELD;3/15/91-UT X---COMPLETE, ROOT GEOMETRY**UT-26~*

DATE: 12/05/91 REVISION: 1 ACT M LOOP B HOT LEG TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 19 ZONE NUMBER: 011

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**SYSTEM HO.41 5613-P-766-S SH.1 OF 1 REF.DWG.NO.3-A05 047100 29n RCS-1305 1 RPV NOZZLE TO PIPE CTMT, 25'84 8-F 85.10 UT 0 UT 45 UT 45RL U1'5RLT UT 50/70 Ur 50/70 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 TKY-AUT 14/0 A X---1/91-PERFORMED BY SNRI(EXAHS 67, 73,-X-79(79S, AHD 85, WELD/BASE METAL/INCONEL

-X-INTERFACE GEOMETRY X-X---**UT-32**X DATE: 12/05/91 REVISION: 1 EACTOR EM LOOP B COLO LEG TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUHHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COHPONENTS PAGE: 20 ZONE NUHBER: 012 SUHHARY EXAHINATION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO HETHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**SYSTEH NO.41 5613-P-766-S SN.1 OF 1 REF.DWG.NO.3-A06 048000 2".RCS-1306-BC-1 2" BRANCH CONNECTION CTHT, 25'8" 8-J PT 89.32 NDE 3.3-391 C X---3/22/91-PT COHPLETE**N/A**048600 27.5"-RCS-1306-14 ELBOM TO RPV NOZZLE CTHT, 25'8" 8-F 85.10 UT 0 TKY-AUT 14/0 UT 50/70 TKY.AUT 14/0 UT 50/70T TKY-AUT 14/0 P X---1/11/91-PERFORHED BY SWRI, EXAHS 72 X--AND 78;SURFACE EXAH TO BE PERFORHED X---NEXT OUTAGE!*~UT-32*>>

~'

DATE: 12/05/91 REVISION: 1 EACTOR TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUMHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS OOP C INTERMEDIATE LEG PAGE: 21 ZONE NUHBER: 013 SUHHARY EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK"*SYSTEM NO.41 5613-P-766-S SH.1 OF 1 REF.DUG.NO.3-A07 048800 31"-RCS-1303-5 STEAH GENERATOR NOZZLE TO ELBOW CTHT, 17.0833'-F 85.70 PT PT UT 45 UT 45T CNR NCR NDE 3.3-378 NDE 3.3-395 NDE 5.5-21 NDE 5.5-21 91-3-049 N91-0341 C-X-X-X-X.X-3/8/91-PT COHPLETE, 1 ACCEPTABLE ROUND AND 3 LINEAR;3/11/91-UT COHPLE'TE, ROOT GEOHETRY;7/23/91-RE.EXAM OF PT INDICATIONS COHPLETE, LINEARS MERE DETERHINED TO BE A NORMAL SURFACE CONDITION**UT-26**049000 31"-RCS.1303-7 PIPE TO ELB(N CTMT, 17.0833'-J 89.11 PT UT 45 UT 45T NDE 3.3-377 NDE 5.5-21 NDE 5.5-21 C---X 3/8/91-PT COMPLETE, 2 ACCEPTABLE ROUND-X-INDICATIONS; 3/11/91 UT COMPLETE, ROOT X---GEOHETRY**UT-12, Ur-26, UT-46**

DATE: 12/05/91 REVISION: 1 SYSTEM LOOP C HOT LEG TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTIOH

SUMMARY

REPORT SECOND IHTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 22 ZONE NUMBER: 014

SUMMARY

EXAMIHATIOH AREA NUMBER IDEHT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM HO.41 56'13-P-766-S SH.1 OF 1 REF.DWG.NO.3-A08 049700 29"-RCS-1308-1 RPV NOZZLE TO PIPE CTMT, 25'84 8-F 85.10 UT 0 UT 45 UT 45RL UT 45RLT UT 50/70 UT 50/70T TKY-AUT 14/0 TKY-AUT 14/0 TKY AUT 14/0 TKY-AUI'4/0 TJ(Y-AUT 14/0 TKY-AUT 14/0 A X---1/11/91-PERFORMED BY SWRI, EXAMS 71,-X-77, 83, 83S, AND 89, BASE METAL/X-INCOHEL/WELD METAL INTERFACE GEOMETRY X-X---**UT-32**X--050200 29"-RCS-1308.4 ELBOW TO STEAM GEHERATOR NOZZLE CTMT,$5'84 8-F PT NDE 3.3-385 e5.70 UT 45 NDE 5.5-26 UT 45T NDE 5.5-26 C X---3/20/91-PT COMPLETE;LIGHT INDICATIONS

-X-AT TOE OF'WELD, DETERMINED TO BE X---NON-RELEVANT; 3/20/91-UT COMPLETE, ROOT GEOMETRY**UT-26~*

I DATE: 12/05/91 REVISION: 1-ACTOR M LOOP C COLD LEG TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRSI'UTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 23 ZONE NUMBER: 015

SUMMARY

EXAMIHAT ION AREA NUHBER IDENT IF I CATION ASHE SEC.XI CATGY ITEM NO EXAH METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R<<*CALIBRATION BLOCK**SYSTEM NO.41 5613-P-766.S SH.1 OF 1 REF.DWG.NO.3-A09 051000 27.5"-RCS-1309-14 ELBOW TO RPV NOZZLE CTMT, 25'8" B-F B5.10 UT 0 TKY-AUT 14/0 UT 50/70 TKY-AUT 14/0 UT 50/70T TKY-AUT 14/0 P X-X-X-1/91-PERFORMED BY SWRI, EXAMS 70 8 76;SURFACE EXAMINATION SCHEDULED FOR NEXT OUTAGE**UT 32*+

DATE: 12/05/91 REVISION: 1 EACTO TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PRESSURIZER SURGE LINE PAGE: 24 ZONE NUMBER: 016

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI ,, CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM HO.41 5613-P-766-S SH.1 OF 1 REF.DWG.NO.3-A10 051200 14"-RC-1302 8 12"-RC-1301 VISUAL GENERAL FOR EVIDENCE OF MOVEMENT CTMT VT-1 CHR HCR WCAP HDE 4.1-151 91-3-048 N90.0092 12959 C--X 2/28/91-VISUAL EXAMINATIOH OF ENTIRE LINE, INCOMPLETE THREAD EHGMEHT, BENT RODS, BORIC ACID, DAMAGED INSULATION/

SIMILAR TO 1988 AND 1990 EXAMINATIONS, ACCEPTABLE PER ENGINEERING EVALUATION

• • N/A**051600 3-RC-F12 WHIP RESTRAINT CTMT VT-3 CNR NCR WCAP HDE 4.3-274 91-3.048 N90-0092 12959 C---X 2/28/91-VT COMPLETE, INCOMPLETE THREAD.EHGAGEMENT, BENT ANCHOR BOLT, 1/10" GAP BETWEEN BASE SUPPORT AHD CEILING, ACCEPTED AS-IS BY ENGINEERING EVALUATION, THIS RESTRAINT IS HOT A SEC1'ION XI SUPPORT+*W=D**51700 3-RC-F13 WHIP RESTRAINT CTMT VT-3 CHR HCR WCAP NDE 4.3-272 91-3-048 N90.0092 12959 C---X 2/28/91-VT COMPLETE BENT ANCHOR BOLT, CHIPPED CONCRETE@DENTED INSULATION/

DIAGOHAL MEMBER BENT, ACCEPTABLE AS-IS, THIS IS HOT A SECTION XI SUPPORT**W=C, SWRI C**051900 VS-IG-12 DUAL SPRING HANGER CTMT, 25'8" F-C F3.50 VT-3 CHR NCR WCAP HDE 4.3.271 91-3-048 N90-0092 12959 A---X 2/28/91-VT COMPLETE, DRAWING DISCREPENCY OH NUMBER OF HUTS ON SPRING CAN**H/A**052100 3-RC-F14 WHIP RESTRAIHT CTMT NDE 4.3-273 91-3-048 N90.0092 12959**W=A, SWIR A**VT-3 C---X 2-28.91 VT-3 COMPLETE;CHIPPED CONCRETE, CHR DEHTED IHSULATIOH NCR WCAP DATE: 12/05/91 REVISIOH: 1 EA TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE IHSPECI'IOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS RESSURIZER SAFETY LOOP A PAGE: 25 ZONE NUMBER: 017

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM NO METMCO PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**SYSTEM HO.41 5613-P-660-S SH.3 OF 3 REF.DUG.NO.3-A11 053800 VALVE 3-551A BOLT IHG VALVE BOLTIHG CTMT B-G-2 Vr-1 HDE 4.1-139 C X---2/7/91-VT COMPLETE, 8 STUDS 87.50**N/A*>>053900 4"-RC-1301-FB FLANGE BOLTIHG CTMT B-G-2 VT-1 B7.50 NDE 4.1-140 A X---2/7/91-VI'OMPLETE(8 STUDS**H/A*1 DATE: 12/05/91 REVISION: 1 EACTOR COOLANT SYSTEM PRESSURIZER TURKEY POIN1'UCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS SAFETY LOOP B PAGE: 26 ZONE NUMBER: 018

SUMMARY

EXAMINATION AREA HUMBER IDENT IF I CAT ION ASME SEC.XI CATGY EXAM ITEH HO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BI.OCK"*SYSTEM NO.41 5613-P-660-S SH.3 OF 3 REF.DWG.NO.3-A12 054100 4"-RC-1302-1A NOZZLE TO SAFE END CTMl'F PT B5.40 UT 45 UT 45T UT 60 HDE 3.3-362 NDE 5.11-3 NDE 5.11-3 NDE 5.11-3 C X---2/7/91-PT COMPLETE;2/8/91-UT-X-COMPLETE, ROOT GEOMETRYi ANGLE SHIFT, 45 X-"-DEGREE EXAM ACHIEVED 50K COVERAGE AND 60-X-DEGREE EXAM ACHIEVED 25X COVERAGE**UT 53**

DATE: 12/05/91 REVISION: 'I EACTO TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERICO, FIRST OUTAGE (199'I)CLASS 1 ALL STATUS COMPONENTS RESSURIZER SAFETY LOOP C PAGE: 27 ZOHE NUMBER: 019

SUMMARY

EXAMINATION AREA NUMBER IDEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ON 6T T RSEH A E I 0 E REMARKS T C G M R<<*CALIBRATIOH BLOCK**SYSTEM NO.41 5613-P-660-S SH.2 OF 3 REF.DMG.NO.3-A13 055500 4"-RC-1303-1A NOZZLE TO SAFE EHD'TMT 8-F PT 85.40 UT 45 UT 60 HDE 3.3-361 NDE 5.11-4 NDE 5.11-4 C X---2/7/91-PT COMPLETE;2/8/91-UT-X-COMPLETE, ROOT GEOMETRY AND ANGLE SHIFT,-X-45 DEGREE EXAM ACHIEVED 50X COVERAGE AND 60 DEGREE EXAM ACHIEVED 25K COVERAGE**Ur-53**056600 4"-RC-1303-FB FLANGE BOLTING CTMT 8-G-2 VI'-1, HDE 4.1-138 C X---2/7/91-VT COMPLETE, 8 STUDS 87.50**H/A**056700 VALVE 3-551C BOLTING VALVE BOLTING CTMT 8-G-2 VT-1 87.50 NDE 4.1-143 C X---2/8/91-VT COMPLETE, 8 STUDS, 8 HUTS**N/A**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL~THIRD PERIOD~FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS RESSURIZER SPRAY TO PRZ.PAGE 28 ZONE NUMBER: 020 SUMHARY EXAMINATION AREA NUMBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK">>SYSTEM NO.41&47 5613.P-661-S SH.4 OF 4 REF.DNG.NO.3-A14 057800 DETAIL C RIGID STRUT CTHT, 21'-11" F-8 VT-3 F2.10 CHR NDE 4.3-253 91-3-035 C---X 2/13/91-VT COHPLETE, EVIDENCE OF PIPE MOVEMEHT, HISALIGNMENT, DAMAGED INSULATION, LOOSE PIPE CLAHP;FOLL(NING INSULATION REHOVAL, CLAMP VERIFIED TO BE TIGHT ACCEPTED AS-IS BY ENGINEERING EVALUATION

• • N/A**060900 ABANDONED VALVE VALVE CTMT VT-1 Vl.1 CNR PWO PC/H NDE 4.1.142 NDE 4.1-163 91-3-018 WA91 021115 5513 90-0499 C---$2/7/91-VT-1 COMPLETE)EVIDENCE OF X---LEAKAGE(THIS CONDITION MILL BE CORRECTED UNDER PC/H 90-0499;5/8/91 VT COHPLETE OH NEM BOLTINGI EXAMINED 8 STUDS AND 8 NUTS**N/A**061100 4"-RC.1304-FH18 ELBOM TO TEE CTHT 8-J 89.11 PT UT 45 UT 45T UT 60 NDE 3.3-364 NDE 5'-71 NDE 5.4-71 NDE 5.4-71 C X---2/7/91-PT COMPLETE;2/14/91-UT X COMPLETE~ROOT GEOMETRY~45 AND 60 X--'-DEGREE EXAMS ACHIEVED 70X COVERAGE-X-**UT-53>>*061300 4"-RC-1304-20 TEE TO TEE CTHT.8-J PT 89.11 UT 45 UT 45T UT 60 NDE 3.3.364 NDE 5.4-69 NDE 5.4-69 NDE 5.4 69 C X---2/7/91-PT COHPLETE;2/8/91-UT-X-COMPLETE, ROOT AND COUNTERBORE X---X-**UT 53**061500 4"-RC.1304-22 REDUCING TEE TO ELBSI CTHT 8-J 89.11 PT UT 45 UT 45T UT 60 NDE 3.3-364 NDE 5'.69 NDE 5.4-69 NDE 5.4-69 C X---2/7/91-PT COMPLETE;2/8/91-UT-X-COMPLETE(ROOT AND COUN'IERBORE X----X-*>>UT 53**061700 44-RC-1304-23 ELBOM TO PIPE CTMT 8-J UT 45 NDE 5.4-69 P X---2/8/91-UT COMPLETE 89.11 UT 45T NDE 5.4-69 X-UT 60 NDE 5.4-69 X-**UT 53**

DATE: 12/05/91 REVISION: 1 EACTOR COOLANT SYSTEM PRESSURIZER TURKEY POINT NUCLEAR PLAHT UNIT 3 INSERVICE INSPECTION SUMHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS SPRAY TO PRZ.PAGE: 29 ZONE NUHBER: 020

SUMMARY

EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**SYSTEH NO.41 8 47 5613-P-661-S SH.4 OF 4 REF.DUG.NO.3-A14 062000 4"-RC-1304-26 PIPE TO SAFE-END CTMT 8-J PT B9.11 UT 45 UT 45T UT 60 NDE 3.3-360 C NDE 5.4-69 NDE 5.4-69 NDE 5.4-69-X 2/7/91-Pl'OMPLETE, 3 ACCEPTABLE ROUND-X-INDICATIONSI 2/8/91-UT COMPLETE(X---COUNTERBORE GEOMETRY-X-**UT 53**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND IHTERVAL, THIRD PERIOD, FIRST OUTAGE (1991>CLASS 1 ALL STATUS COMPONENTS SPRAY LINE PAGE: 30 ZONE NUMBER: 021

SUMMARY

EXAMINATION AREA NUMBER IDENT IF ICATIOH ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**SYSTEM HO.41&47 5613-P-661-S SH.4 OF 4 REF.DUG.NO.3-A15 066600 4".RC.1305-13 PIPE TO ELBSI CTMT B-J PT B9.11 UT 45 UT 45T UT 60 HDE 3.3-372 C NDE 5.4-73 NDE 5.4-73 NDE 5.4-73 X--X-X-X-2/25/91-PT COMPLETE, FAINT PINK IHDICATIOli AT TOE OF IIELD, CONSIDERED TO BE HOH-RELEVANT 2/25/91-UT COMPLETE, ROOT GEOMETRY*"UT-53**068500 44-RC-1305-19 PIPE TO TEE CTMI'-J B9.11 PT UT 45 UT 45T UT 60 NDE 3.3-365 HDE 5.4-72 HDE 5.4-72 NDE 5.4-72 C X---2/14/91-PT AHD UT COMPLETE, ROOT X---GEOMETRY, LIMITED EXAMINATION UPSTREAM X---OUE TO TEE CONFIGURATION, 60X COVERAGE-X-OH THE UPSTREAM SIDE, 100K COVERAGE ON THE DOMNSTREAM SIDE**UT 53*0 DATE: 12/05/91 REVISIOH: 1 EACTOR COOLANT SYSTEM PRESSURIZER TURKEY POINT NUCLEAR PLANT UNIT 3'INSERVICE INSPECTION SUHMARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OU'TACE (1991)CLASS 1 ALL STATUS COMPONENTS RELIEF LINE PAGE: 31 ZONE NUMBER: 022

SUMMARY

EXAMINATION AREA HUMBER IDENT IF I CAT I OH ASME SEC.XI CATGY , EXAM ITEM NO ME'IHOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R<<*CALIBRATION BLOCK**SYSTEM NO.41 5613-P-660.S SH.1 OF 3 REF.DWG.NO.3-A16 069100 4"-RC-1306-4 ELBOW TO PIPE CTHT 8-J PT 89.11 UT 45 UT 45T UT 60 NDE 3.3-363 HDE 5'-70 NDE 5.4-70 NDE 5.4-70 C X-X-X---X--2/7/91"-PT COMPLETE;2/8/91-UT COMPLETE*<<Ur-53**069400 4"-RC-1306-7 TEE TO REDUCER CTHT 8-J 89.11 PT UT 45 UT 45T UT 60 NDE 3.3-363 NDE 5.4-70 NDE 5.4-70 NDE 5.4-70 C X---2/7/91-PT COMPLETE;2/8/91-UT X---COMPLETE, LIMITED EXAMINATION DUE TO X---BRANCH CONNECTIONI 83X COVERAGE ACHIEVED X-**UT 53**069500 3-RCH-27 SPRING HANGER CTHT, 71'9" F-C F3.50 VT.3,4 VT-3 CNR'CR PC/H CWO NDE 4.3.229 H-91-5568 91.3-019 N91-0189 90-381 300161 C---X 2/7/91-VT COMPLETE, BENT ROO AND LOOSE X---LOCK NUT, COLD SETTING DOES NOT AGREE WITH AS-BUILT DRAWING, SUPPORT'WAS REWORKED UNDER PC/M, DISCREPENCIES

'WERE CORRECTED*<<N/A>>>>'070700 3"-RC-1304-1 REDUCER TO ELBNI CTHT 8-J PT 89.21 NDE 3.3-363 C X---2/7/91-PT COMPLETE**N/A**071700 3"-RC-1305-3 ELBOW TO ELBOW CTMT 8-J PT 89.21 NDE 3.3.363 C X---2/7/91-PT COMPLETE'*N/A<<*

071900 VALVE 3-455C VALVE BOLTING CTMT 8-G-2 VT-1 87.70 NDE 4.1-141 C X..-2/7/91-VT COMPLETE<<*N/A>>>>

DATE: 12/05/91 REVISION: 1 ASTE DISPOSAL SYSTEM-LIDUID TURKEY POINT HUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS RC LOOP A DRAIN ZONE NUMBER: 026

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I.0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*>>SYSTEM HO.61 5613.P.671-S SH.1 OF 7 REF.DWG.HO.3-A22 077500 2"-RC-1301-2 PIPE TO ELBOW CTMT 8-J PT 89.40 HDE 3.3-373 C X---2/25/91-PT COMPLETE**H/A**

DATE: 12/05/91 REVISION: 1 ASTE DISPOSAL SYSTEM-LIOUID TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS RC LOOP B DRAIN 20HE NUMBER: 027

SUMMARY

EXAMIHATIOH AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~~SYSTEM NO.61 5613-P-671-S SH.4 OF 7 REF.DWG.NO.3-A23 078500 2"-RC-1302-1 BRANCH COHHECTION TO PIPE CTM'I 8-J PT B9.40 NDE 3.3-374 C X---2/25/91-PT COMPLETE*AH/A**

DATE: 12/05/91 REVISIOH: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION SUMHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS

-LIOUID RC LOOP C DRAIN ZOHE NUMBER,: 028

SUMMARY

EXAMINATION AREA HUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M.R**CALIBRATION BLOCK**SYSTEM NO.61 5613-P-671-S SH.5 OF 7 REF.DUG.NO.3-A24 079600 24-RC-1301-1 BRANCH CONHECTIOH TO PIPE CTMT 8-J PT 89.40 NDE 3.3-387 C X---3/20/91-PT COMPLETE**N/A*A 080100 2"-RC-1303-5 VALVE 3-505A TO PIPE CTMT 8 J PT 89.40 NDE 3.3-387 C X---3/20/91-PT COMPLETE*~N/A"*

0 DATE: 12/05/91 REVISION: 1 C UXILIARY SPRAY LIHE TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS ZONE NUMBER: 035

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC~XI CATGY EXAM ITEM NO METHOD H I 0 S ONGT T RSEH A E I 0 E REMARKS PROCEDURE T C G M R**CALIBRATION BLOCK**'YSTEM HO.41 8 47 5613-P-661-S SH.2 8 4 OF 4 REF.DWG.NO.3-A31 116700 2"-RC-1310-11 ELBml TO PIPE CTMT 8-J PT 89.40 HDE 3.3-382 C X-.-3/18/91-PT COMPLETE**N/A**117800 2"-RC-1310-16 PIPE TO ELBOll CTMT 8-J PT B9.40 NDE 3.3-382'C X---3/18/91-PT COMPLETE**H/A*"

DATE: 12/05/91 REVISION: 1 ESIDUAL HEAT REMOVAL FROM TURKEY POINT NUCLEAR PLANT WHIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS RC LOOP C HOT LEG PAGE: 36 ZONE NUMBER: 036

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C 0 M R>>*CALIBRATION BLOCK**SYSTEH NO.50 5613-P-669-S SH.1 OF 1 REF.DWG.NO.3-A35 121600 3-RCH-12 SPRING HANGER CTMT, 15'6" F-C F3.50 VT-3(4 CNR PWO NDE 4.3-213 91-3.013 WA 910206104726 C---X 1/31/91-VT COMPLETE, SETTINGS STAMPED ON SPRING CAN DO NOT AGREE WITH DRAWING, ACCEPTABLE AS-IS PER ENGINEERING EVALUATION

• • N/A>>*122200 3.RCH-11 BOX RESTRAINT CTHT, 15'-6" F-B VT-3 F2.10 NDE 4.3-212 C X---1/31/91-VT COMPLETE>>>>N/A>>>>122400 14"-RHR-1301-9 ELBOW TO PIPE CTHT B-J 89.11 PT UT 45 UT 45T UT 60 CNR NDE 3.3-353 NDE 5.4-63 NDE 5.4-63 NDE 5.4-64 91-3-004 C---X 1/12/91-PT COMPLETE, 3 ACCEPTABLE

-X-LINEAR INDICATIONS; 1/15/91-UT X---COMPLETE, ROOT GEOMETRY-X->>*UT-30**122600 3-RCH-10 DUAL SPRING SUPPORT CTHT, 15'6" F-C F3.50 VT-3(4 VT-3,4 CHR PWO NDE 4.3-191 NDE 4.3-290 91-3-001 WA910206100B33 C---X 1/12/91-U-BOLT ON SOUTH SIDE OF X-SUPPORT IS BENT, BROKEN GROUT(BOTH SCALES PAINTED, UNABLE TO READ SETTINGS;6/3/91-VT RE-EXAM COMPLETE AFTER REPAIRS**H/A>>*

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS TO RC LOOP A COLD LEG PAGE: 37 ZONE NUMBER: 037

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM HO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**GAL IBRAT ION BLOCK*>>SYSTEM HO.50 5613-P-585-S SH.1 OF 1 REF.DUG.NO.3-A36 123300 3.875D VALVE INTERIOR SURFACES CTMT B.M-2 812.50 VT-3 HDE 4.3-276 CNR 91-3-053 PRO NA 90121 5095843 C---X 3/18/91-VT COMPLETE OH VALVE FLANGE SURFACE, VALVE BODY SEAT AHD VALVE B(NL, A SMALL NICK.25" IH LENGTH,.05" DEPTH HAS OBSERVED ON THE FLANGE SEAT SURFACE, DURING PRESSURE TES'I, HO LEAKAGE HAS DETECTED, ACCEPTABLE AS-IS**H/Al*125500 104-S I-1301-17 PIPE TO ELBON CTMT 8-J 89.11 PT UT 45 UT 45T UT 60 NDE 3.3-384 HDE 5.4-74 NDE 5.4-74 NDE 5.4-74 C X---3/19/91-PT AHD UT COMPLETE, ROOT-X-GEOMETRY X-X-**UT-27**125600 10"-Sl-1301-18 l ELBON TO ELBON CTM'I 8-J 89.11 PT UT 45 UT 45T UT 60 HDE 3.3-384 NDE 5.4-74 NDE 5.4-74 HDE 5.4 74 C X---3/19/91-PT AHD UT COMPLETE, ROOT-X-GEOMETRY X---X-~*UT-27**126000 8"-RHR-1301-1 TEE TO PIPE CTMT 8-J 89.1'I PT UT 45 UT 45T UT 60 CNR HDE 3.3-354 HDE 5.4-67 NDE 5.4-67 HDE 5.4-68 91-3-005 C---X 1/13/91-PT COMPLETEI 7 ACCEPTABLE X---LINEAR AHD 1 ACCEPTABLE ROUND X---INDICATION; 1/'15/91-UT COMPLETE;X---LIMITED EXAMINATION DUE TO TEE CONFIGURATION

• • UT-41**

DATE: 12/05/91 REVISION: 1 TURKEY POIHI'UCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 COMPLETED COMPONENTS RC LOOP 8 COLD LEG PAGE: 38 ZONE NUMBER: 038

SUMMARY

EXAMINATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM NO.50 5613-P-586-S SH.1 OF 1 REF.DNG.NO.3 A37 127000 VALVE 3-8758 BOLTING VALVE BOLTIHG CTMT 8-G-2 VT-1 87.70 VT-1 CNR PNO NCR NDE 4.1-157 91-0990 91-3-059 WA910412080740 N91-0432 C--X 3/22/91-VT COMPLETE, BORIC ACID X---ACCUMULATION, APPARENT REDUCTION IN BASE MATERIAL ON VALVE BOHNET, STUDS AHD BONNET MERE REPLACED, 16 STUDS AHD NUTS IIERE EXAMINED**N/A**127100 10"-S1-1302-4 VALVE 3-8758 TO ELBON CTMT 8-J 89.11 PT UT 45 UT 45T UT 60 NDE 3.3-390 HDE 5.4-75 NDE 5.4-75 NDE 5.4-75 C X--3/21/91-PT AND UT COMPLETE, ROOT-X-GEOMETRY, LIMITATION DONNSTREAM DUE TO X---SWEEPOLETS, 85X COVERAGE FROM ELBOW SIDE X---AND 25X COVERAGE FROM VALVE SIDE>>*UT-27*>>127300 10"-S I=1302-5 ELBOW TO PIPE CTMT 8-J 89.11 PT UT 45 UT 45T UT 60 HDE 3.3-390 HDE 5.4-75 HDE 5.4-75 HDE 5.4-75 C X---3/21/91-PT AHD UT COMPLETE, ROOT-X-GEOMETRY X-X->>*UT-27>>>>128300 10"-SI-1302-14 PIPE TO ELBOM CTMT 8-J 89.11 PT UT 45 UT 45T Ur 60 CNR NDE 3.3-350 NDE 5.4-6'I HDE 5.4-61 NDE 5.4.62 91-3-003 C--.X 1/12/91-PT COMPLETE, 6 ACCEPTABLE

-X-LINEAR INDICATIONS; 1/15/91-UT X---COMPLETE, ROOT GEOMETRY-X-**UT 27**129100 8"-RHR-1302-2 PIPE TO ELBSI CTMT 8-J 89.11 PT UT 45 UI'5T UT 60 NDE 3.3-352 NDE 5.4-65 NDE 5.4-65 HDE 5.4-66 C---X 1/12/91-PT COMPLETEI 1 ACCEPTABLE X---ROUND INDICATION; 1/15/91-Ul'OMPLETE X-X-**UT-41**

DATE: 12/05/91 REVISION: 1 ESIDUAL HEAT REMOVAL TO TURKEY POINT HUCLEAR PLANT UNIT 3 INSERVICE INSPECI'IOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERICO, FIRST OU'TAGE (1991)CLASS 1 ALL STATUS COMPONENTS RC LOOP C COLO LEG PAGE: 39 ZONE NUMBER: 039

SUMMARY

EXAMINATION AREA HUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*~SYSTEM NO.50 5613-P-587-S SH.1&2 OF 2 REF.DNG.HO.3-A38 134400 10"-SI-1303-FN14 ELBON TO ELBM CTMT B-J PT 89.11 ur 45 UT 45T UT 60 HDE 3.3-392 NDE 5.4-76 HDE 5.4-76 HDE 5.4-76 C X---3/22/91-PT AND UT COMPLETE, INSIDE-X-SURFACE GEOMETRY X-X-"*UT-27**

DATE: 12/05/91 REVISIOH: 1 IGH HEAD SAFETY INJECTION TURKEY POINI'UCLEAR PLANT UHIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS LOOP A INSIDE CTMT ZONE NUMBER: 040

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~*SYSEM NO.62 5613-P-583-S SH.1 OF 1 REF.D'IJG.NO.3-A39 135100 2n SI 1301 5 PIPE TO ELBSl CTMT 8-J PT 89.21 NDE 3.3-375 C X---2/25/91-PT COMPLETE**N/A**

DATE: 12/05/91 REVISION: 1 IGH HEAD SAFETY INJECTION LOOP 8 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS INSIDE CTMT ZONE HUMBER: 041

SUMMARY

EXAMINATION AREA NUMBER IDEHTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**SYSTEM HO.62 5613-P-584-S SH.1 OF 1 REF.DUG.NO.3-A40 140700 8051-R-528-01 PIPE RESTRAINT CTMT, 27'54 F-8 VT-3 F2.10 HDE 4.3-247 C X---2/12/91-VT COMPLETE~*H/A**141100 2"-Sl-1302-6 PIPE TO VALVE 3-8688 CTMT 8-J PT 89.21 HDE 3.3-366 C X---2/20/91-PT COMPLETE~~H/A*~141300 2"-Sl-1302-7 VALVE 3-8688 TO PIPE CTMT 8-J PT 89.21 NDE 3.3-367 C X---2/20/91-PT COMPLETE**H/A*"

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS CTION LOOP C INSIDE CTMT PAGE: 42 ZONE NUMBER: 042

SUMMARY

EXAMINATION AREA NUHBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEN A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**SYSTEM NO.62 5613-P-648-S SH.1 OF 1 REF.DWG.NO.3-A41 144600 2"-S I-1303-2 PIPE TO ELBCM CTMT 8-J PT NDE 3.3-355 89.21 C---X 1/15/91-PT COMPLETE, 1 ACCEPTABLE ROUND INDICATION

• • N/A**145200 2"-SI-1303-6 PIPE TO VALVE 3.868C CTHT B-J ,PT 89.21 NDE 3.3-368 C X---2/21/91-PT COMPLETE**N/A~*145400 2"-SI-1303-7 VALVE 3-868C TO PIPE CTMT B-J PT 89.21 NDE 3.3-368 C X---2/21/91-PT COMPLETE t*N/A**t 45500 2"-SI-1303-8 PIPE TO ELBOW CTHT 8-J PT 89.21 PT CNR NCR PIJO NDE 3.3-349 91-0701 91-3.002 N91-0050'A910311130758 C---X 1/14/91-PT COMPLETE/3 ACCEPTABLE X---ROUND INDICATION AND 1 UNACCEPTABLE CURVLINEAR; 3/28/91.PT RE-EXAM COMPLETE AFTER REMOVAL OF INDICATION

• • N/A**145700 24.S I-1303-10 PIPE TO ELBml CTMT 8-J PT 89.21 NDE 3.3-351 C X-.1/12/91-PT COMPLETE**N/AAA DATE: 12/05/91 REVISION: 1 IGH HEAD SAFETY INJECTION LOOP A TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS INSIDE CTMT PAGE: 43 ZONE NUMBER: 043 SUMHARY EXAMINATION AREA HUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C 0 M R**CALIBRATIOH BLOCK*>>SYSTEM NO.62 5613-P-764-S SH.2 OF 2 REF.DWG.NO.3-A42 148900 8080-H-010-01 PIPE RESTRAINT CTMT, 24'4" F-B VT-3 F2.10 VT-3 VT-3 CNR NCR PWO NDE 4.3-246 C 91-1454 91-2071 91-3-028.N91-0236 WA 9104 05105313 X-X 2/12/91-VT COMPLETE, DRAWING X DISCREPANCY, U-BOLT SHOWN ON DRAWING BOLTED TO SIDE IS IH CONFLICT WITH FIELD DRAWING;5/28/91-VT COMPLETE, MISSING PARTS;7/4/91-VT RE-EXAM COMPLETE**N/A~*

DATE: 12/05/91 REVISION: 1 INCH HIGH PRESSURE SAFETY INJECTION A TURKEY POINT NUCLEAR PLANT UNIT 3'HSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUtAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 44 ZONE HUMBER: 043

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM 29" RCS TO VALVE 3-866A REF.DUG.NO.003 A42 152400 8080-H-010-06 PIPE RESTRAINT CTMT, 17'3" F-B VT-3 NDE 4.3-294 F2.10 E X---8/26/91-VT COMPLETE, EXPANDED EXAM DUE TO FAILURE OF ADJACENT SPRING HANGER, 8080.H-010-14

• • H/A*~153400 8080-H-010-14 SPRING HANGER F C F3 F 50 Vt-3(4 VT-3 CNR NCR PWO NDE 4.3-254 91-2328 91-3-036 H91-0239 WA910404085557 C---X 2/13/91-VT COMPLETE(LOOSE NUtS AND X---CO'TTER PIH HOT SPREAD, BENT SPRING CAH;ENGINEERING EVALUATIOH DETERMINED SPRING CAN IS NOT FUNCTIONAL AHD MUST BE REPLACED;7/23/91-VT RE-EXAM COMPLETE**H/A**

DATE: 12/05/91 REVISION: 1 INCH HIGH PRESSURE SAFETY INJECTION B TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUMMAR'Y REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONEHTS PAGE: 45 ZONE NUMBER: 044

SUMMARY

EXAHINATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM 29" RCS TO VALVE 3-866B REF.DUG.NO.003-A43 154800 8080-R-009-01 BOX RESTRAIHT F-8 VT-3 F2.10 NDE 4.3-237 C X--.2/12/91-VT COMPLETE*IN/A*A 157200 8080-H-009.07 BOX RESTRAINT CTMT, 20'0" F-8 F2.10 VT-3 CNR NCR NDE 4.3-251 91-3-034 N91-0242 C---X 2/13/91-VT COMPLETE, INCOMPLETE THREAD ENGAGEHEHT, ACCEPTED AS-IS BY ENGINEERING EVALUATION

• IN/A*%158400 8080-M-009-05 U-BOLT RESTRAINT F-8 F2~10 VT-3 CNR NDE 4.3-245 91-3-027 C X---2/13/91-VT COMPLETE, DRAUING DISCREPENCY BETHEEH AS.BUILT DRAWING AND ACTUAL FIELD CONDITION, ACCEPTABLE AS-IS PER ENGINEERING EVALUATION

• ~H/A**

DATE: 12/05/91 REVISION: 1 INCH CHEHICAL 8 VOLUME CONTROL LINE C TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUHHARY REPORT SECOND INTERVAL, THIRD PERICO, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COHPONENTS PAGE: 46 ZONE NUHBER: 045 SUHHARY EXAHINAT ION AREA NUHBER IDEHT I F ICATION ASME SEC.XI CATGY EXAH ITEN NO HETHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REHARKS T C G H R**CALIBRATIOH BLOCK~*FROH 294 RCS HOT LEG TO REGEN.HT.EX REF.DNG.NO.003-A44 165700 3"-CH-1301-41 VALVE 3-3128 TO PIPE B-J PT.NDE 3.3-369 C X---2/21/91-PT COHPLETE B9.21**N/A**

DATE: 12/05/91 REVISION: 1 INCH CHEMICAL 8 VOLUME CONTROL LINE A TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE IHSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS ZONE NUMBER: 046 StIMMARY EXAMINATION AREA NUMBER IDEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM 27.5" RCS TO VALVE 3 310A REF.DWG.NO.003-A45 169900 3"-CH-1302-23 ELBmI TO PIPE 8-J PT NDE 3.3-370 C X---2/21/91-PT COMPLETE 89.21**H/A**170000 3"-CH-1302-24 PIPE TO ELBOU 8-J PT 89.21 NDE 3.3-370 C X---2/21/91-PT COMPLETE*~H/A**

0 DATE: 12/05/91 REVISION: 1 VOLUME CONTROL LINE TURKEY POINI'UCLEAR PLANT UHIT 3 INSERVICE INSPECTION SUHMARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS ZONE NUMBER: 047 SUMHARY EXAMINATION AREA.NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I'0 S ONGT T RSEH A E I 0 E REMARKS T C G H R<<*CALIBRATIOH BLOCK**FROM REGEN.HEAT EXCHANGER TO VLV 3-312C REF.DWG.NO.003-A46 171600 3-VCH-29 U-BOLT RESTRAINT 27l 6ll F-B VT-3 NDE 4.3-255 C X--2/12/91-VT COMPLETE F2.10 4*N/A**

DATE: 12/05/91 REVISION: , 1 TURKEY POIHT NUCLEAR PLANT UHIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 49 ZOHE HUMBER: 048

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R'*CALIBRATION BLOCK**FROM REGEH.HT.EX.TO 27.5" RCS PIPING REF.DUG.NO.003-A47 175000 FSK-M-146 BOX RESTRAIHT F-8 VT-3 F2.10 VT-3 CNR NCR PNO NDE 4.3-256 C NDE 4.3-291 91.3-038 N91-0241 UA 910327085313

-X X-2/13/91-VT COMPLETE, GAP BETIIEEN BASE PLATE AND CEILING, LOOSE HUTS AND NASHERS ON SOUTH SIDE OF BASE PLATE)5/17/91.VT RE-EXAM COMPLETE, GAP IS ACCEPTABLE PER HCR 91-0241**N/A**

DATE: 12/05/91 REVISIOH: 1 INCH CHEMICAL 8 VOLUME TURKEY POIHT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS CONTROL LINE A PAGE: 50 ZONE NUMBER: 050

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R~~CALIBRATION BLOCK**FROM RCP A TO VALVE 3-2980 REF.DUG.HO.003-A49 181300 1.5"-CH-1301-FB-'I FLANGE BOLTING B.G-2 VT-1 87.50 HDE 4.1-150 C X---2/25/91-VT COMPLETE, 4 STUDS AHD 8 NUTS**N/A**181500 1.5"-CH-1301-2 PIPE TO REDUCER 8'PT 89.21 HDE 3.3-376 C X-..2/25/91-PT COMPLETE**N/A**182100 2"-CH-1303-5 ELBOM TO PIPE 8-J PT B9.21 NDE 3.3-376 C X---2/25/91-PT COMPLETE**N/As*

DATE: 12/05/91 REVISION: 1 INCH TURKEY POINT NUCLEAR PLANT UHIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS UME CONTROL LINE C PAGE: 51 ZONE NUMBER: 051

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S O'NGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM RCP C TO VALVE 3-298F REF.DWG.NO.003-A50 183700 2"-CH-1304-6 ELBOW TO PIPE B-J PT 89.21 HDE 3.3.371 C X---2/21/91-PT COMPLETE*~N/A**185300 H-4'ESTRAINT CTMT, 27~8~F-B F2.10 VT 3 NCR 9'I-2622 91.0766 C X--.8/23/91-VT COMPLETE, EXAMINED'IJITH HCR.91-0766**N/A~*

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTIOH SUMHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS LUME CONTROL LINE A ZONE NUMBER: 053 SUMHARY EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.Xi CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T.C G M R**CALIBRATION BLOCK**FROM RCP A TO VALVE 3-306A REF.DWG.NO.003-A52 188900 454A-1 BOX RESTRAINT F-8 VT-3 F2.10 HDE 4.3.238 C X---2/12/91-VT COMPLETE*~H/A**189600 454A-3 DUAL RIGID STRUTS F.B VT-3 F2.10 NDE 4.3-239 C X---2/12/91-VT COMPLETE**N/A**

DATE: 12/05/91 REVISION: 1 EACTOR COOLANT PUMP A TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 53 ZONE NUMBER: 056

SUMMARY

EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**3P200A REF.DWG.HO 003-V13A 201300 RCP-FSA-1 thru 24 MAIN FLANGE STUDS B-G-1 UT 60 86.180 HDE 5.7-13 , C X---3/22/91-UT COMPLETE**UT-18**201400 RCP-FHA-1 thru 24 MAIN FLANGE NUTS B.G-1 VT-1 B6.200 HDE 4.1-152 C X---3/19/91-VT COMPLETE, 24 HUTS IN-PLACE**H/A*~201600 RCP-A-F FLYWHEEL CTMT RG UT 1.14 HDE 5.15-1 C X---5/15/91-UT COMPLETE**FLYWHEEL**

01700 RCP-SPA-L1 thru L3 INTEGRAL ATTACHMENTS 8-K-1 PT 810.20 NDE 3.3-386 C X---3/20/91-PT INCOMPLETE, FOR LIMITATIOHS, SEE RELIEF REQUEST NO.9**N/A~*201800 RCP-SPA-L1 thru L3 PUMP SUPPORTS F-A F1~10 VT-3 VT-3 VT-3 CHR NDE 4.3-277 HDE 4.3-278 HDE 4.3-279 91-3-054 C--X 3/19/91-VT COMPLETEI RCP-SPA-L1 THRU-X L3(EVIDENCE OF MOVEMEHT, ACCEPTEO AS.IS-X BY ENGINEERING EVALUATION, ELONGATED HOLE IS PART OF DESIGN*~H/A~*

DATE: 12/05/91 REVISION: 1 EACTOR COOLANT PUHP B TURKEY POINT NUCLEAR'PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 54 ZONE NUMBER: 057

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**3P200B REF.DWG.NO.003-V13B 202400 RCP-FSB-1 thru 24 MAIN FLANGE STUDS 8-G-1 UT 60 NDE 5'-14 C X---3/22/91-UT COMPLETE 86.180>><<UT 18*>>202500 RCP-FNB-1 thru 24 MAIH FLANGE NUTS 8-G-1 VT-1 NDE 4.1-156 C X-.-3/22/91-VT COMPLETE 86.200**N/A**202700 RCP-8-F FLYWHEEL CTMT RG UT 1;14 NDE 5.15 2 C X---6/18/91-UT COMPLETE*>>FLYWHEEL*>>

02800 RCP-SPB-L1 thru L3 INTEGRAL ATTACHMENTS 8-K-1 PT 810.20 PT PT PT CNR HCR PWO NDE 3.3-388 NDE 3.3-389 91-1532 91-1548 91-3-056 N91-0433 WA910416124712 C---X 3/20/91-PT COMPLETE LUG 2, X UNACCEPTABLE LINEAR, PT COMPLETE ON LUGS-X 1 8(3, 4 ACCEPTABLE LINEARS;6/3/91-PT X-.-RE.EXAM AFTER GRINDING(3 LINEARS;6/3/91-PT RE-EXAH COMPLETE AFTER FURTHER GRINDING**N/A>>*202900 RCP-SPB-L1 thru L3 PUHP SUPPORTS F-A F1.10 VT-3 V'I-3 VT-3 CNR NDE 4.3-280 NDE 4.3-281 NDE 4.3-282 91-3-055 C---X 3/21/91-RCP-SPB-L1 THRU L3, VT-X COMPLETE, EVIDENCE OF MOVEHENT, ACCEPTEO-X AS-IS BY EHGIHEERING EVALUATIONS ELOHGATED HOLES ARE PART OF DESIGN<<*H/A<<>>

DATE: 12/05/91 REVISION: 1 ACTOR COOLANT PUMP C TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTIOH

SUMMARY

REPORT SECOND INTERVAL~THIRD PERIOD~FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 55 ZONE NUMBER: 058

SUMMARY

EXAMINATION AREA NUMBER IDENT I F I CAT I OH ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**3P200C REF.DWG.NO.003-V20C 203100 3-RCP-C-A PUMP CASING MELO A 8-L-1 VT-1 NDE 4.1-159 C X--~-4/24/91-VT COMPLETE 812.10**H/A**203200 3-RCP-C-B PUMP CASING MELD 8 8-L-1 VT-1 HDE 4.1-160 C X---4/24/91-VT COMPLETE 812.10>>>>H/A>>>>203300 3-RCP-C-C PUMP CASING IIELD C 8-L-1 VT-1 812.10 HDE 4.1-161 C X---4/24/91-VT COMPLETE*>>H/A>>*203500 RCP-FSC.1 thru 24 MAIN FLANGE STUDS 8-G 1 UT 60 NDE 5.7-15 C X---3/22/91-UT COMPLETE 86.180**UT-18**203600 RCP-FNC-1 thru 24 MAIN FLANGE HUTS 8-G-1 VT-1 86.200 HDE 4.1-158 C X---3/22/91-VT COMPLETE, 24 NUTS EXAMINED<<*H/A>>>>203900 RCP-SPC-L1 thru L3 INTEGRAL ATTACHMENTS 8-K-1 PT 810.20 PT NDE 3.3-394 HDE 3.3-393 C X---3/24/91-PT COMPLETE OH LUG 3, 3 X X--ACCEPTABLE LINEAR INDICATIOHSI

.4/24/91 PT COMPLETE OH LUGS 1 AND 2, LUG 2 HAS 3 ACCEPTABLE ROUND AND 2 ACCEPTABLE LINEAR IND I CAT IONG**H/A*>>

DATE: 12/05/91 REVISION: 1 EACTOR COOLANT PUHP C TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUHHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 56 ZONE NUMBER: 058 SUHHARY EXAHINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**3P200C REF.DWG.NO.003-V13C 204000 RCP-SPC-L1 thru L3 PUHP SUPPORTS F A F1.10 VT-3 NDE 4.3-284 C---X 3/22/91-VT COHPLETE, EVIDENCE OF HOVEHENT, ACCEPTABED AS-IS BY ENGINEERING EVALUATION, THIS SUPPORT'WAS DESIGNED TO HOVE**N/A**

DATE: 12/05/91 REVISIOH: 1 GENERATIVE HEAT EXCHANGER , TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRS'I OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 57 ZONE NUMBER: 059

SUMMARY

EXAMINATIOH AREA NUMBER I DENT I F I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**3E200 REF.DWG.NO.003-V11 209200 RGX 3E200 HRC REQUIRED EXAMINATIONS VT-3 VT-2 NDE 4.3-201 NDE 4.2-1 C X---1/3/91-VT-3 COMPLETE;10/21/91-VT-2 X---COMPLETE)EXAMINED IN ACCORDANCE WITH RELIEF REQUEST 3*AH/A**

DATE: 12/05/91 REVISION: 1 TEAM GEHERATOR C SECONDARY SIDE TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECI'ION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS PAGE: 58 ZONE NUMBER: 062

SUMMARY

EXAMINATION AREA NUHBER IDENTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO, HETHOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**3E210C REF.DWG.NO.003-V10C, 212000 3-SG-C-CL C-A TRAHSITION TO UPPER SHELL WELD C1.10 UT 0 UT 45 UT 45T UT 60 UT 60T UT UT-AUTO CHR NDE 5.1-38 NDE 5.1-38 NDE 5.1-38 NDE 5'.38 NDE 5.1-38 ID CREEPER P-SCAN 91-3.050 C X---2/27/91 UI'AND 45 COMPLETE 2/28/91-X X UT 60 COMPLETELY 1 ACCEPTABLE SLAG X---INCLUSION AND SPOT IHDICATIOH

-X X---**UT-7**-X-X DATE: 12/05/91 REVISION: 1 4 INCH RESIDUAL HEAT REMOVAL A TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUMHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS PAGE: 59 ZONE NUMBER: 063

SUMMARY

EXAMINATION AREA HUHBER IDENT I F I CATION ASME SEC.Xl CATGY EXAM ITEM NO METHOD PROCEDURE ,N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R"*CALIBRATIOH BLOCK**FROM RNR PUMP A TO VALVE 3-751 REF.DWG.NO.003-801 216800 3-ACH-'12 SPRING SUPPORT 21 9ll F-C F3.50 VT-3,4 CNR NCR PWO NDE 4.3-228 91.3-017 N91-0151 WA910323115155 C---X 1/31/91-VT COMPLETE(DISCREPENCY BETWEEN COLD LOAD SETTINGS IDENTIFIED ON DRAWING AND THOSE MARKED OH SPRING CAN, ACCEPTABLE AS-IS BY ENGINEERING EVALUATION

<<<<N/A<<<<

DATE: 12/05/91 REVISION: TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS ZONE NUMBER: 072

SUMMARY

EXAMINATION AREA HUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT'RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM RHE TO VALVE 3-759A REF.DUG.HO.003 B07 239900 3-ACH-29 DUAL RIGID STRUTS F B VT-3 F2.10 HDE 4.3-193 C X---1/15/91-VT COMPL'ETE**N/A**

DATE: 12/05/91 REVISION: 'I 6 IN TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE IHSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS FETY INJECTION LINE PAGE: 61 ZONE NUMBER: 077 SUMHARY EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM RUST TANK TO 10 INCH SIS LINE REF.DUG.NO.003-812 247000 16"-SI-2301-5 PIPE TO VALVE 3-864B C-F PT C5.11 NDE 3.3-357 C---X 1/17/91-PT COMPLETE, 1 ACCEPTABLE LINEAR INDICATION, NON RELEVANT INDICATIOHS AT TOE OF MELD;NO EXAH WAS PERFORMED OH THE AS CAST VALVE BODY~~H/A~*247100 16"-Sl-2301-6 VALVE 3-864B TO TEE C-F PT C5.11 PT PT CHR NCR PWO NDE 3.3-356 91-0722 NDE 3.3.396 91-3-006 N91-0155 MA910305091819 C---X 1/17/91 PT COMPLETE(3 LINEAR X---INDICATIONS, 1 UHACCEPTABLEI 4/4/91-PI'---RE EXAM COMPLETE AFTER REHOVAL OF IHDICATIOHS

%*N/AP*248900 3-SIH-'l18 BOX RESTRAINT F-8 VT-3 NDE 4.3-215 C X..-1/31/91-VT COMPLETE F2.10 ION/A*A 249100 3-S I H-119 BOX RESTRAINT 12 I 1II F-B VT-3 F2.10 NDE 4.3-214 C X---1/31/91-VT COMPLETE**H/A**

DATE: 12/05/91 REVISION: 1 HEAT REMOVAL SYSTEM C TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPOHENTS PAGE: 62 ZONE NUMBER: 080

SUMMARY

EXAMINATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 ONGT RSEH E I 0 E REMARKS C G M R**CALIBRATIOH BLOCK**FROM ACCUMULATOR C TO VALVE 3-875F REF.DWG.NO.003-B17 252600 SR-50 RIGID STRUT 22'6" F-B F2.10 VT-3 VT-3 CHR PWO HDE 4.3-216 C---X 1/31/91-VT COMPLETE, PAINTED SPHERICAL HDE 4.3-288 X---BEARINGS;4/22/91-VT RE EXAM COMPLETE 91-3-014 WA91 02061 04726**H/A**

H DATE: 12/05/91 REVISION: 1 INCH RESIDUAL HEAT REMOVAL A TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND IHI'ERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS H I 0 PAGE: 63 ZONE NUMBER: 084

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAM ITEM HO METHOD PROCEDURE S OHGT T RSEM A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM VALVE 3-876A TO 10"XB" REDUCER REF.DUG.NO.003-822 259700 SR-5 PIPE SLEEVE F-B F2.10 VT-3 VT-3 CNR PCM HDE 4.3-204 M-91-0872 91-3-008 90-0311 C---X 1/31/91-VT COMPLETE;INADEQUATE THREAD X ENGAGEMENT~

BASE PLATE AHD ANCHOR BOLTS ARE BEING REPLACEOI 2/26/91-VT RE-EXAM COMPLETE*AN/A*A 259800 3-SIH-90 RIGID STRUT F-B F2.10 VT-3 CNR HOE 4.3-217 91-3-015 A---X 1/31/91-VT COMPLETE(CHIPPED GROUT AND PAINTED SPHERICAL BEARINGS~*N/A*~

DATE: 12/05/91 REVISION: INCH RESIDUAL HEAT REMOVAL SYSTEM B TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUHHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUI'AGE (1991)CLASS 2 ALL STATUS COHPONENTS PAGE: 64 ZONE NUMBER: 089'UHHARY EXAHINATI ON AREA NUHBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**FROM PEN NO.11 TO VALVE 3-8760 REF.DUG.NO.003-B27 269600 SR-6 BOX RESTRAINT CTHT, 17'0" F-8 VT-3 F2~10 NDE 4.3-218 C X---1/31/91-VT COMPLETE**N/A**270100 3-SIH-93A RIGID STRUT C'IHT, 22'0" F-C F3.10 VT-3 VT-3 CNR PNO NDE 4.3-207 C---X 1/31/91-VT COHPLETEI PAINTED SPHERICAL NDE 4.3-289 X---BEARINGS;4/22/91-VT RE-EXAH COHPLETE 91-3-010 WA910206103832

• ~N/A**270400 3-SIH-94 RIGID STRUT CTHT, 22'0" F-8 F2.10 VT-3 VT-3 CNR PWO NDE 4.3-206 C---X 1/31/91-VT COMPLETEI PAINTED SPHERICAL NDE 4.3-287 X---BEARINGSI 4/22/91-VT RE-EXAH COHPLETE 91-3-009'IJA910206103040

• • N/A**270700 3-SIN-95 RIGID STRUT F-8 VT-3 NDE 4.3.205 C X---1/31/91-VT COHPLETE F2.10 DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS RAY LINE DISCHARGE A PAGE: 65 ZONE NUMBER: 093

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM CS PUMP A TO SPRAY HEADER REF.DUG.NO.003-878 278000 SR-165 SPRING HANGER AUX BLDG, 26'0" F-C F3.50 VT-3,4 VT-3,4 CNR PIG NDE 4.3-258 C NDE 4.3.285 91-3.039 WA910312075657 X 2/13/91-VT-3 COMPLETE, H 8 C SEETINGS OH SPRING CAN DO NOT AGREE MITH DRAQINGI 4/15/91-VT AFTER ADJUSTMENT OF SPRING CAH COMPLETE*AN/A4*278800 SR-166 SPRING HANGER 26 I 0 I I F-C VT-3,4 HDE 4.3-259 C X---2/13/91-VT COMPLETE F3.50 VT-4**N/A*A 279800 3-SIH-9 ROD HANGER 26'0" F-B F2.10 VT-3 CNR NDE 4.3-260 C---X 2/13/91-VT COMPLETE, MISSING BOLTS, 91-3-040 ACCEPTED AS-IS BY ENGINEERING EVALUATION 1**M/A*1 79900 SR.163 BOX RESTRAIHT 26<On F-8 VT.3 NDE 4.3-261 C X---2/13/91-VT COMPLETE F2.10**H/A**280200 3-RCSH-107 U-BOLT RESTRAINT 34<5n F-8 VT-3 NDE 4.3-257 C X---2/13/91-VT COMPLETE F2.10**N/A*A

DATE: 12/05/91 REVISION: 1 1 INCH MAIN STEAM C INSIDE CONTAINMENT TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THiRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPOHEHTS PAGE: 66 ZOHE NUMBER: 099

SUMMARY

EXAMIHATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM STEAM GENERATOR C TO PEH.HO.C REF.DUG.NO.003-B61 296700 31".MSC-2303-1A HOZZLE TO REDUCER C-F MT C5.21 UT 45 UT 45T UT 60 HDE 2.2-123 HOE 5.2-53 HDE 5.2-53 HDE 5.2-53 C X---2/20/91-MT AND UT COMPLETE(ROOT--X-GEOMETRY X--X-**UT-21**

DATE: 12/05/91 REVISION: 1 AM C INSIDE CON'TAINMENT TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE IHSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS PAGE: 67 ZONE NUMBER: 099

SUMMARY

EXAMINATION AREA HUMBER IDEHI'I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C 0 M R**CALIBRATIOH BLOCK"" FROM STEAM GENERATOR C TO PEH.HO.C REF.DWG.HO.003-B61 296800 26"-MSC-2303-1 REDUCER TO ELBOW C-F MT C5.21 UT 45 UT 45T UT 60 HDE 2.2-122 NDE 5.2-51 NDE 5.2-5'I HDE 5.2-51 C X---2/19/91-MT AHD UT COMPLETE, INSIDE-X-SURFACE GEOMETRY X---X-**UT-21~*296900 26"-MSC-2303-LS-1 ELBOW LONG SEAM US C-F MT C5.22 UT 45 UT 45T UT 60 NDE 2.2-122 HDE 5.2-52 HDE 5.2 52 NDE 5.2.52 C X---2/19/91-MT AND UT COMPLETE X X-X**UT-21~*299300 26".MSC-2303-LS-8 ELBOW LONG SEAM DS C-F C5.22 MT NDE 2.2-127 UT 45 NDE 5.2 55 UT 45T HDE 5.2-55 UT 60 HDE 5.2-55 C X---3/20/91-MT COMPLETE;3/21/91 UT X---COMPLETE X-X-**UT-21**299400 26".MSC-2303-9 ELBOW TO PIPE C-F C5.2'I MT NDE 2.2-127 UT 45 NDE 5.2-56 UT 45T HDE 5.2-56 UT 60 HDE 5.2.56 C X---3/20/91-MT COMPLETE)3/21/91-UT X COMPLETE, ROOT GEOMETRY X--X-%*N/A**299500 26"-MSC.2303-LS-9 PIPE LONG SEAM US C-F C5.22 MT UI'5 UT 45T UT 60 HDE 2.2-127 HDE 5.2-55 HDE 5.2 55 HDE 5.2-55 C X--.3/20/91.MT COMPLETE;3/21/9'I-UT X---COMPLETE X-X---**UT-21**300700 26"-MSC-2303-LS.12 PIPE LONG SEAM DS C-F C5.22 MT UT 45 UT 45T UT 60 HDE 2.2.127 HDE 5.2-55 HDE 5.2-55 HDE 5.2-55 C X---3/20/91-MT COMPLETE;3/21/91.UT--X-COMPLETE, ROOT GEOMETRY X-X-**UT 21**

DATE: 12/05/91 REVISION: 1 6 INCH MAIN STEAM C IHSIOE TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS COHTAINMEHT PAGE: 68 20HE NUMBER: 099

SUMMARY

EXAMINATION AREA HUMBER IDEHT IF I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM STEAM GENERATOR C TO PEN.NO.C REF.DWG.NO.003.B61 300800 26"-MSC-2303-13 INTEGRAL ATTACHMENT CTMT C-C MT C3.20 HDE 2.2-128 C X---3/20/91-MT COMPLETE HDE 5.2**N/A**

DATE: 12/05/91 REVISION: 1 4 INC TURKEY POINT NUCLEAR PLANT UNIT 3:INSERVICE INSPECTION SUMHARY REPORI'ECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS

'TSIDE CONTAINMENT PAGE: 69 20NE NUMBER: 100 SUHMARY EXAMINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEH NO HETNOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**FROM 26" LINE TO RELIEF VALVES 1400 8 1402 REF.DWG.NO.003-858 303500 14".MSA-2301-1 WELDOLET TO PIPE C-F MI'5.21 RT NDE 2.2-115 C X---1/24/91-MT COMPLETE;1/30/91-RT TS 9.3-6 X---COHPLETE<<*N/A*>>304000 A SLIDING STANCHION F-8 VT-3 F2.10 NDE 4.3-194 C X---1/15/91-VT COHPLETE**N/A**FROH 26" LINE TO RELIEF VALVES 1401 8 1403 REF.DWG.NO.003 B58 304500 144 HSA-2302.2 REDUCING TEE TO FLANGE C-F PT NDE 3.3-359 C5.21 RT TS 9.3-1 C X---1/13/91-RT COMPLETE, PERFORMED IN LIEU X-.-OF UT DUE TO CONFIGURATION; 1/23/9'I-PI'OHPLETE, PERFORMED IN LIEU OF HT DUE TO CONFIGURATION

• • N/A**305100 14"-HSA-2302-5 REDUCING TEE TO CAP C-F HT C5.21 RT NDE 2.2-112 TS 9.3-2 C X---1/13/91-RT COHPLETE, PERFORHED IN LIEU X---OF UT DUE TO CONFIGURATION; 1/22/91.HT COHPLETE**N/Ala DATE: 12/05/91 REVISION: 1 6 INCH MAIN STEAM C OUTSIDE TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS CONTAINMENT PAGE: 70 ZONE NUMBER: 102

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM PEN.NO.26C TO VALVE 3-10 006 REF.DWG.HO.003-B62 309600 26".MSC-2306-13A PIPE TO PIPE MS PLATFORM C-F C5.21 MT UT 45 UT 45T UT 60 HDE 2.2-131 HDE 5.2-57 HDE 5.2-57 HDE 5.2-57 C X---3/28/91-MT AND UT COMPLETE, ROOT X---GEOMETRY(ALSO EXAMINED LONGITUDINAL X---SEAMS UPSTREAM AND DOWNSTREAM OF MELO;-X-LIMITED EXAM DUE TO BRANCH CONNECTION I*UT 21**310000 26"-MSC-2306.17 PIPE TO VALVE 3-CV-2606 MS PLATFORM C-F C5.21 MT UT 45 U1'5T UT 60 HDE 2.2-131 NDE 5.2-57 HDE 5.2-57 NDE 5.2-57 C X-.-3/28/91-M1'ND UT COMPLETE;ALSO X---EXAMINED LOHGITUOIHAL SEAM DOWNSTREAM OF X--HELD-X+*UT-21+*

DATE: 12/05/91 REVISION: 1 4 INCH MAIN STEAM C OUTSIDE TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND IN'IERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPOHENTS CONTAINMENT PAGE 71 ZONE NUMBER: 102

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM 26" LINE TO RELIEF VALVES 1409&1410 REF.DUG.NO.003-062 311800 14-MSC-2305-1 MELDOLET TO PIPE C-F MT C5.21 RT NDE 2.2-114 C X---1/24/91-MT COMPLETE;2/2/91-RT TS 9.3-5 X COMPLETE(ACCEPTABLE SLAG AND POROSITY**N/A**FROM 26" LINE TO RELIEF VALVES 1411!L 1413 REF.DUG.NO.003-B62 312700 14"-MSC.2306-1 WELDOLET TO REDUCING TEE C.F MT C5.21 RT NDE 2.2-113 TS 9.3-3 C X---1/13/91-RT COMPLETE, PERFORHED IN LIEU X---'F UT DUE TO CONFIGURATION; 1/22/91-MT COMPLETE 44N/A'kk 313100 14".MSC.2306-4 REDUCING TEE TO FLANGE C-F PT C5.21 RT NDE 3.3-358 TS 9.3-4 C X---1/13/91-RT COMPLETEI PERFORHED IN LIEU X---OF UT DUE TO CONFIGURATIONI 1/23/91-PT COMPLETE, PERFORHED IN LIEU OF HT DUE TO CONFIGURATION

• • N/A~*

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANI'NIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRSI'UTAGE (1991)CLASS 2 ALL STATUS COHPONENTS LOlJDOMN C INSIDE CTMT.PAGE: 72 ZONE NUMBER: 105

SUMMARY

EXAHINATION AREA NUMBER IDENTIFICATION ASME SEC~XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK>>" FROM STEAM GENERATOR C TO PEN.NO.28C REF.DWG.NO.003-B76 319300 6"-BDC-2303-FH1 VALVE SGB 3-005 TO REDUCER C-F MT NDE 2.2-125 C C5.21 UT 45 NDE 5.2-54 UT 45T NDE 5.2.54 UT 60 NDE 5.2-54 X---2/25/91-MT AND UI'OMPLETE/

ROOT-X-GEOMETRY, LIHITED EXAHINATION DUE TO X---REDUCERI 50X COVERAGE ACHIEVED-X-**UT.22**319900 6"-BDC-2303-FWS VALVE SGB-3-006 TO REDUCER C-F HT C5.21 UT 45 UT 45T UT 60 NDE 2.2-'125 NDE 5.2-54 NDE 5.2-54 NDE 5.2-54 C X---2/25/91-MT AND UT COMPLETE, ROOT-X-GEOMETRY, LIHITED EXAMINATION DUE TO X---REDUCER, 50X COVERAGE OBTAINED--X-*~UT-22~*320000 6".BDC-2303-FM6 PIPE TO VALVE SGB-3-006 C-F C5.21 MT UT 45 UT 45T UT 60 NDE 2.2-125 NDE 5.2-54 NDE 5.2-54 NDE 5.2-54 C X---2/25/91-MT AHD UT COMPLETE, ROOT X---GEOMETRY X-X-**UT 22**320100 781018-H.322-07 RIGID STRUT F-B F2.10 VT-3 VT-3 CNR Pl@NDE 4.3-270 91-0943 91-3-047 HA910402111920 C---X 2/21/91-VT COMPLETE(LOOSE NUTS;X---4/20/91-VT RE-EXAM COMPLETE**N/A%*321200 781018-H-322-05 RIGID STRUT CTMT, 21'84 F-C F3.10 VT-3 CNR NDE 4.3-269 91-3-043 E---X 2/15/91-VT COMPLETE(INCOMPLETE THREAD ENGAGEMENT, ACCEPTED AS-IS, EXPANDED EXAM DUE TO FAILURE OF ADJACENT SNUBBER 781018-H-322-04

• • N/A4*322300 78101B-H-322-03 BOX RESTRAIHI'-8 F2.10 VT-3 NDE 4.3-268 E X-.-2/15/91-VT COMPLETE, EXPANDED SCOPE EXAMINATIOH DUE TO FAILURE OF ADJACENT SNUBBER 78101B-H-322-04

• • N/A*A DATE: 12/05/91 REVISION: 1 INCH STE TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS OWDOWN C INSIDE CTMT.PAGE: 73 ZONE NUMBER: 105

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.Xl CATGY EXAH ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**FROM STEAM GENERATOR C TO PEN.NO.28C REF.DWG.NO.003-B76 323200 6"-BDC-2303-FW24 PIPE TO ELBOW C-F C5.21 MT UT 45 UT 45T UT 60 NDE 2.2-125 NDE 5.2 54 NDE 5.2'4 NDE 5.2-54 C X---X-X--X-2/25/91-HT AND UT COMPLE'IE, ROOT GEOMETRY**UT 22**323700 6"-BDC-2303-FW29 REDUCER TO PIPE C-F C5.21 HT MT HT UT 45 UT 45T UT 60 CNR NCR PWO NDE 2.2-121 91-0677 91-0808 NDE 5.2-49 NDE 5.2-49 NDE 5.2-49 91.3-024 H91-0195 WA910302110807 C---X 2/8/91-MT COMPLETE, 1 LINEAR--X INDICATION 1.375" IN LENGTH)2/13/91 X--UT COMPLETE, ROOI'EOMETRY AHD BEAM X-REDIRECTIOHT 4/9/91-MT RE-EXAH X--COHPLETE--X-**UT-22**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS C OUTSIDE CTMT.PAGE: 74 ZONE HUMBER: 108 SUMHARY EXAMINATION AREA NUHBER IDEHT IF ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOO PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK~~FROM PEN.NO.28C TO VALVE CV-3-6275C REF.ON.NO.003-877 325500 6"-BDC-2306-Fl60 REDUCER TO PIPE C-F~C5~21 MT MT MT UT 45 UT 45T UT 60 CNR PWO NCR NDE 2.2-116 C 91.0667 91-0672 NDE 5.2-44 NDE 5.2-44 NDE 5.2-44 91-3-007 WA910305092518 N.91-0156-X X--X-X--X-1/31/91-MT COMPLETE, 1 UNACCEPTABLE LINEAR'/31/91

-UT COMPLETE, LIHITED EXAH DUE TO REDUCER, INSIDE SURFACE GEOMETRY 3/22/91-HT RE EXAM CCMPLETE(1 UNACCEPTABLE LINEAR;3/25/91-MT RE-EXAM COMPLETE AFTER REMOVAL OF INDICATIOH

• ~UT 22**

0 DATE: 12/05/91 REVISION: IN FEEDMATER SYSTEM A TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL~THIRD PERIODS FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS PAGE: 75 ZONE NUMBER: 109

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM STEAM GENERATOR A TO VLV FCV-3.478 REF.DWG.NO.003-866 330500 AUGMENTED EXAMIHATIOH FROM NOZZLE RAMP TO 1 DIAMETER ON ELBOW UT 45 HDE 5.16-22 UT 60 NDE 5.16-22 C--X-2/11/91-UT COMPLETE, ROOT,-X-COUN'IERBORE, AND INSIDE SURFACE GEOMETRY**UT-20, UT-29~*

DATE: 12/05/91 REVISION: 1 AIN FEEDIJATER LINE LOOP 8 TURKEY POINT NUCLEAR PLANI'NIT 3 IHSERVICE INSPECTIOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRS'I OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS PAGE: 76 ZONE NUMBER: 1'10

SUMMARY

EXAMINATION AREA NUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C 0 M R**CALIBRATION BLOCK**FROM STEAM GENERATOR 8 TO VLV FCV-3-488 REF.D'WG.NO.003.867 332200 14"-FHB-2303-9 PEHETRATIOH

¹278 TO PIPE C-F MT C5.11 NDE 2.2-120A C X---2/8/91-MT COMPLETE t*UT 20*%333300 14"-FH8.2303-16 PIPE TO ELBOI C-F C5.21 MT HDE 2.2-120A UT 45 HDE 5'.50 UT 45T HDE 5.2-50 UT 60 NDE 5.2.50 C X---2/8/91-MT COMPLETE;2/12/91-UT X-COMPLETE, ROOT AND BACKIHG BAR GEOMETRY X-X-ttUT 20tk 333800 AUGMENTED EXAMINATION FROM NOZZLE RAMP TO 1 DIAMETER ON ELBOW UI'5 UI'0 NDE 5.16-23 C--X-2/12/91-UT COMPLETE, AUGMENTED EXAM, NDE 5.16.23-X-ROOT AND BACKING BAR GEOMETRY**UT-20, UT-29**

DATE: 12/05/91 REVISION: 1 AIN FEED'WATER SYSTEM C TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPOHEHTS PAGE: 77 ZONE NUMBER: 111 SUMHARY EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK~*FROM STEAM GENERATOR C TO VLV FCV-3-498 REF.DWG.NO.003-868 333925 14"-FWC-2306.1 VALVE FCV-3-498 TO PIPE C-F HT C5.21 UI'5 UT 45T.UT 60 NDE 2.2-117 NDE 5.2.46 NDE 5.2.46 NDE 5.2.46 C X---X--X--X-1/31/91-MT AND UT COMPLETE, VALVE AND ROOT GEOMETRY**UT-20**334100 7883-H-013-11 WELDED RESTRAINT F-C VT-3 F3.10 NDE 4.3-219'C X---1/31/91-VT COMPLETE**N/A*I 334300 14"-FWC-2306-5 VALVE 3-20-333 TO ELBOW C-F C5~21 MT UT 45 UT 45T UT 60 NDE 2.2-117 NDE 5.2-46 NDE 5.2-46 NDE 5.2-46 C X---1/31/91-MT AND UT COMPLETE, BACKING-X-BAR GEOMETRY X--X-*~UT-20**334500 144-FWC-2305-1 PIPE TO ELBOW C-F MT C5.21 UT 45 UT 45T UT 60 NDE 2.2-117 NDE 5.2-46 NDE 5.2.46 NDE 5.2-46 C'X---1/31/91-MI'ND UT COMPLETE(BACKING-X-BAR GEOMETRY X---X--UT-20**335200 144-FWC-2305-6 PIPE TO PIPE C-F C5.21 MT UT 45 UT 45T UT 60 NDE 2.2-119 NDE 5.2-45 NDE 5.2-45 NDE 5.2.45 C X---2/1/91-MT AND UT COMPLETE, ROOT X---GEOMETRY X---X**UT 20**338100 18"-FWC-2305-24 HOZZLE EXTEHSION TO NOZZLE CTHT C-F Hl'5.21 UT 0 UT 45 UT 45T UT 60 Ul'0 NDE 2.2-124 NDE 5.1-37 NDE 5.1-37 NDE 5.1-37 NDE 5.1-37 NDE 5.1-37 C X---2/21/91-MT COMPLETE;2/26/91-UT X---COMPLETE, THERMAL SLEEVE GEOMETRY AND-X-BEAH REDIRECTION X-----X-**UT-10**X--

DATE: 12/05/91 REVISION: 1 AIN FEEDWATER SYSTEH C TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS PAGE: 78 ZOHE NUMBER: 111 SUHMARY EXAMINATION AREA NUHBER IDENT I F I CATION ASME SEC.Xl CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R~~CALIBRATION BLOCK**FROM STEAM GENERATOR C TO VLV FCV-3-498 REF.DWG.NO.003-868 338200 AUGMEHTED EXAHINATION FROM NOZZLE RAMP TO 1 DIAMETER ON ELBOW UT 45 NDE 5.16-24 UT 60 NDE 5.16-24 C--X-2/21/91-UT COMPLETE, ROOT, BACKING-X-RING, AND COUNTERBORE GEOHETRY**UT-20, UT-29**

DATE: 12/05/91 REVISION: 1 INCH FEEDWATER BYPASS LIHE B TURKEY'POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991): CLASS 2 ALL STATUS COMPONENTS ZONE NUMBER: 113

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH HO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**FROM MAIN FEEDNATER LINE TO VALVE 3-489 REF.DUG.NO.003-870 339700 7883-H-013-04 BOX RESTRAINT F-C VT-3 NDE 4.3-200 F3.10 C X---1/31/91-VT COHPLETE DATE: 12/05/91 REVI S ION: 1 INCH FEEDWATER BYPASS LINE C TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 2 ALL STATUS COMPONENTS ZONE NUMBER: 114

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEH NO METKOO PROCEDURE N I S 0 N T R S A E I T C G G T E H 0 E REMARKS M R**CALIBRATION BLOCK*FROM MAIN FEEDWATER LINE TO VALVE 3-499 REF.DWG.NO.003-B7'I 340600 7883-H-013-12 BOX RESTRAINT F-C VT-3 NDE 4.3-220 F3.10 C X---1/31/91-VT COMPLETE t*N/A**340700 64-FWC-2303-4 PIPE TO VALVE 3-20-332 C-F HT C5.11 NDE 2.2-118 C X---1/31/91-HT COMPLETE**N/A*~341000 6"-FWC.2303-7 PIPE TO WELDOLET C-F MT C5.11 NDE 2.2-118 C X---1/31/91-MT COHPLETE**N/At%

DATE: 12/05/91 REVISION: 1 6 INCH COMPONENT COOLING llATER TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS C OUTSIDE CTMT.PAGE: 81 ZONE NUMBER: 120

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G H R~*CALIBRATION BLOCK~*FROM CQJ PUMP TO CCW HEAT EXCHANGER REF.DlJG.NO.003-C03 345500 SR-158 PIPE SUPPORT F-8 VT-3 NDE 4.3-192 F2.10 C X---1/13/91-VT COMPLETE, LIGHT RUST NOTED AROUND BASE PLATE**H/A**345510 SR-158 IA INI'EGRAL ATTACHMENT D-B VT-3 D1.20 NDE 4.3-192 C X---1/13/91-VT COMPLETE<<~N/A**345700 3-ARH-92 SPRING HANGER F-C VT-3,4 NDE 4.3-199 C X-1/31/91-VT COMPLETE F3.50 VT-4**H/A**5810 3-ARH-92 IA IHTEGRAL ATTACHMENT D-8 VT.3 02.40 NDE 4.3-199 C X---1/31/91-VT COMPLETE**N/A~~

DATE: 12/05/91 REVISION: 1 6 INCH COMPONENT COOLING TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPOHENTS

'WATER 8 OUTSIDE CTMT.PAGE: 82 ZONE NUMBER: 121

SUMMARY

EXAMINATION AREA NUMBER IDENT I F I CAT I OH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*~FROM CCW PUMP TO CCW HEAT EXCHANGER REF.OWG.NO.003-C04 345900 3-ARH-104 SLIDIHG STANCHIOH F-8 VT-3 F2.10 NDE 4.3-240 C X.--2/13/91-VT COMPLETE**H/A**345910 3-ARH-104 IA INTEGRAL ATTACHMENT D-8 VT-3 NDE 4.3-240 C X---2/13/91-VT COMPLETE 02.20 1**H/A**346000 3-ARH-105 F-8 VT-3 NDE 4.3-249 RIGID ROO HANGER WITH U-BOLT F2.10 VT-3 M-91-1153 CNR 91-3.030 C---x 2/13/91-VT COMPLETE, MISSING LOCK NUT;X---3/8/91-VT RE-EXAM COMPLETE**H/A**46010 3-ARH-105 IA INTEGRAL ATTACHMENT D-8 VT-3 D2.20 NDE 4.3-249 C X---2/13/91-VT COMPLETE**N/A*>>

~'

DATE: 12/05/91 REVISIOH: 1 INCH COMPONENT COOLING TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS MATER C INSIDE CTMI'OHE NUMBER: 124

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT" T RSEH A E I 0 E REMARKS T C G M R*"CALIBRATIOH BLOCK**FROM NORMAL CTMT COOLER TO 84 CCM REF.DWG.NO.003-C07 348300 292A U-BOLT RESTRAINT F-8 VT.3 NDE 4.3-202 C X---1/31/91.VT COMPLETE F2'0**H/A**

DATE: 12/05/91 REVISION: 1 INCH COMPONENT COOLING MATER A 8 8 TURKEY POINT NUCLEAR PLAHT UNIT 3 INSERVICE IHSPECTIOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS INSIDE ZONE NUMBER: 125

SUMMARY

EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C 0 M R**CALIBRATIOH BLOCK**FROM NORMAL CTMT COOLER A 8 B TO 8" CCQ REF.DUG.NO.003.C08 348500 3-CCH-49 SLIDIHG STANCHION CTMT F-8 VT-3 HDE 4.3-203 C X---1/31/91-VT COMPLETE F2.10**H/A**348510 3-CCH-49 IA INTEGRAL ATTACHMENT D.B VT 3 D2.20 NDE 4.3-203 C X---1/31/91.VT COMPLETE fAN/A*A DATE: 12/05/91 REVISION: INC LING MATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTIOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERICO, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 85 ZONE NUMBER: 135

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ON 0T T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**FROM CTMT.PEN TO BA EVAPORATOR 3E216 REF.DWG.NO.003-C18 354900 3-ACH-48A U.BOLT HANGER F-8 F2.10 VT-3 CHR NCR NDE 4.3-232 91-3-022 N91-0193 C---X 2/8/91-VT COMPLETE, EYE ROD AND U-BOLT BENT, ACCEPTABED AS-IS BY ENGINEERING EVALUATION

• • N/A**355200 3-BAH-7 SPRIHG SUPPORT F-C VT-3I4 F3.50 CHR NCR PWO NDE 4.3 231 91-3-021 N91-0193 MA910402140545 A---X 2/8/91-VT COMPLETE, BEAH IIELD PULLED AlJAY, CORROSION, SPRING CAH SETTINGS ARE NOT THE SAME AS SHDHH OH AS BUILT DRAHIHG, ACCEPTED AS-IS BY ENGIHEERING EVALUATION

• • N/A**355310 3.BAH-7 IA INTEGRAL ATTACHMENT D-8 VT-3 D2.40 NDE 4.3-231 C X---2/8/91-VT COMPLETE**N/A**

~'

DATE: 12/05/9'I REVISION: 1 t I 4 INCH COHPONENT COOLING IJATER A TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 86 ZONE NUMBER: 137 SUHHARY EXAHINATIOH AREA HUMBER IDENT I F ICATION ASME SEC.XI CATGY EXAH ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK~*FROM CONTAINMENT PENETRATION 44A REF.OWG.NO.003-C20 356200 3-SMH-15 ROO HANGER F-B Vj'-3 F2.10 VT-3 CNR NCR PMO NDE 4.3-251 91-2327 91-3-032 N91-0237 WA 9103231 24441 C---X 2/13/91-VT COMPLETE, LOOSE BOLTS X---IDENTIFIEDI 7/23/91-RE-EXAM COMPLETE AFTER NUTS IIERE TIGHTENED**N/A**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS ZOHE NUMBER: 138

SUMMARY

EXAMI HAT ION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0.E REMARKS T C G M R**CALIBRATIOH BLOCK~*FROM CONTAINMENT PENETRATION 44C REF.DUG.HO.003.C21 356600 SR-296 ROO HANGER F-B VT.3 HDE 4.3-236 F2.10 C X.--2/13/91-VT COMPLETE<<*N/A~*356610 SR-296 I A INTEGRAL ATTACHMENT D-8 VT-3 D2.20 HDE 4.3-236 C X---2/13/91-VT COMPLETE**H/A**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 AI.L STATUS COMPONENTS PAGE: 88 ZONE HUMBER: 141

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R<<<<CALIBRATION BLOCK**FROM NOH-REGENERATIVE HEAT EXCHANGER REF.DLIG.HO.003-C24 357800 3-ACH-143 RIGID ROO HANGER F-C VT-3 F3.10 CHR HDE 4.3-248 91-9'I-029 C---X 2/13/91-VT COMPLETE, INCOMPLETE THREAD ENGAGEMENT

~DRAWIHG DISCREPANCY'CCEPTABLE AS-IS PER EHGIHEERING EVALUATION

<<<<H/A**

DATE: 12/05/91 REVISION: 1 INCH COMPONENT COOLING TURKEY POINT NUCLEAR PLANT UHIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS TO HON.REGEN.HX.

ZONE NUMBER: 141

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM SEAL HATER HEAT EXCHANGER REF.DWG.NO.003.C24 358100 3-ACH-75 U-BOLT RESTRAINT F.B VT-3 HDE 4.3-242 F2.10 C X---2/13/9'I-VT COMPLETE**H/A**

DATE: 12/05/91 REVISION: 1 2 INCH COMPONENT COOLING MATER TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND IHTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 90 ZONE NUMBER: 142

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK*~FROM VALVE 3-787M REF.DWG.NO.003-C25 358200 3-ARH-114 ROD HANGER Er U BOLT F-8 VT-3 F2.10 VT-3 CNR PUO NDE 4.3-250 91-0939 91-3-031 WA910328090031 C---X 2/13/91-Vl'OMPLETE(DRAHING X---DISCREPANCY, MISSING LOOCK NUTS;4/20/91-VT RE-EXAM COMPLETE*IN/A**FROM VALVE 3-835E REF.O'.NO.003-C25 358600 SR-313 ANCHOR F-8 Vl'-3 NDE 4.3 241 C X---2/13/91-VT COMPLETE F2'0**N/A**358610 SR-313 IA INTEGRAL ATTACHMENT 0 0-8 VT-3 NDE 4.3-241 C X---2/13/91-VI'OMPLETE D2.20~~H/A**

DATE: 12/05/91 REVISION: 1 OMPOHENT COOLING TO RHX B TURKEY POIHT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPOHENTS PAGE: 91 ZONE NUMBER: 146 SUMHARY EXAHINATIOH AREA NUMBER IDENTIFICATION ASME" SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM PEN 72&43 TO RHX 3E206B REF.DWG.NO.003-C29 360810 3-ACH-4 U-BOLT HANGER F.B VT-3 F2'0 VT-3 VT-3 VT-3 CHR HCR PWO NDE 4.3-244 C 91-0940 91-1726 91-1942 91-3.026 H91-0504 WA910328090752 X-X-X X---2/13/91-VT COMPLETE, LOOSE NUT;4/20/91-HISSING PARTS;6/14/91-SUPPORT DID NOT HATCH DRAWING)6/26/91 VT RE-EXAM COMPLETE AFTER CORRECTION OF DEFICIENCIES

• • N/A 1a 360820.3-ACH-4 IA INTEGRAL ATTACHMEHT D-B VT-3 NDE 4.3-244 C X---2/13/91-VT COHPLETE D2.20*IN/A**TO RESIDUAL HEAT EXCHANGER 3E206B REF.DWG.NO.003-C29 60900 SR-300/ACH-5 BOX RESTRAINT F-C VT-3 NDE 4.3-263 C X---2/13/91-VT COHPLETE F3.10**N/AA*360910 SR-300/ACH-5 IA INTEGRAL ATTACHMENT D-8 VT-3 NDE 4.3-263 C X---2/13/91-VT COMPLETE D2.20*1N/A**FROM VALVE 3-835C REF.DWG.NO.003-C29 361200 SR-314 ANCHOR F-8 VT 3 F2.10 NDE 4.3-262 C X---2/13/91-VT COHPLETE**M/A**361210 SR-314 IA INTEGRAL ATTACHMENT D-B VT-3 NDE 4.3-262 C X---2/13/91-VT COMPLETE D2~20**N/A*4 DATE: 12/05/91 REVISION: 1 OMPONENT COOLING TO RHX B TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS ZONE NUHBER: 146 SUHMARY EXAHINATION AREA NUHBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G H R*~CALIBRATION BLOCK**TO PEN 72 REF.DUG.NO.003-C29 361300 3-ACH-6 U-BOLT RESTRAINT F-B VT-3 F2.10 NDE 4.3-264 C X--.2/13/91-VT COMPLETE I**N/A**

DATE: 12/05/91 REVISION: 1 INCH COHPONENT COOLING NATER TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION SUHHARY REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE<1991)CLASS 3 ALL STATUS COHPONENTS ZONE NUMBER: 148 SUHMARY EXAMINATION AREA NUHBER IDENT IF ICATION ASME SEC.XI CATGY EXAM ITEH NO HETNOO PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**FROH BORIC ACID EVAPORATOR 3T240 REF.DWG.NO.003-C31 361800 3-BAH-25 U-BOLT RESTRAINT F-8 VT-3 NDE 4.3-235 F2.10 C X---2/13/91-VT COMPLETE>>>>N/A>>>>

~i~'

DATE: 12/05/91 REVISION: 1 0 INCH COMPONENT COOLING'IIATER TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 94 ZONE NUMBER: 150

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM C'TMT.PEN P-22 REF.DWG.NO.003-C33 363500 3-CCH-25 U-BOLT RESTRAINT F-8 VT-3 HDE 4.3-265 C X---2/13/91-VT COMPLETE F2~10**H/A**363510 3.CCH-25 IA INTEGRAL ATTACHMENT 0-B VT-3 D2.20 HDE 4.3-265 C X.--2/13/91.VT COMPLETE*1H/A*4

DATE: 12/05/91 REVISION: 1 4 INCH COMPONENT COOLING HATER TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUI'AGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 95

SUMMARY

EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM CV-3-2814 8 CV-3-2908 REF.DUG.NO.003-C34 364100 8074-A-368-01 ANCHOR 12 I OII F-B F2.10 VT-3 CHR HCR NDE 4.3-266 91-3-041 H91-0243 C---X 2/13/91-VT COMPLETE, INCOMPLETE THREAD ENGAGEMENT, ACCEPTED AS-IS BY ENGINEERING EVALUATION

• ~N/A**364110 8074-A-368-01 I A INTEGRAL ATTACHMENT 12'0" D-8 VT-3 D2.20 HDE 4.3-266 C X--2/13/91-VT COMPLETE**N/A*4

DATE: 12/05/91 REVISION: 1 OMPONENT COOLING WATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPOHENTS PAGE: 96 ZONE NUMBER: 152

SUMMARY

EXAMINATIOH AREA NUMBER IDENT IF I CATION ASME SEC.XI CATG'Y EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM PEH.NO.4 REF.DWG.NO.003-C36 364700 3-BAH-26 SPRING HAHGER F.C VT-3,4 F3.50 CNR NDE 4.3-231 91-3-023 A---X 2/8/91.VT COMPLETE, BEAM PULLED AWAY, BROKEH WELD, SEE 3-BAH-7 MULTIPLE SUPPORT, ACCEPTED AS-IS PER ENGINEERING EVALUATION

• • H/A**364710 3-BAH-26 IA INTEGRAL ATTACHMENT D-8 VT-3 D2.40 NDE 4.3-231 C X---2/8/91-VT COMPLETE**H/A**

DATE: 12/05/91 REVI S ION: 1 OMPONENT COOLING WATER FROM TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERICO, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS R.H.X.@AD SUPPORTS PAGE: 97 ZONE NUMBER: 153

SUMMARY

EXAMINATION AREA NUHBER IDENT I F I CAT ION ASHE SEC.XI CATGY EXAH ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**REF.DWG.NO.003-C37 365800 3-ACH-7 U-BOLT RESTRAINT F-C VT-3 F3.10 NCR 91-2087 91-0677 C X-.-7/8/91-VT COMPLETE, EXAMINED AS PART OF HCR 91-0677**N/A%*

DATE: 12/05/9'I REVISION: 1 IHCH MATER DISCHARGE TURKEY POINT NUCLEAR PLANI'NIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 98 20NE NUMBER: 162

SUMMARY

EXAMIHATION AREA NUMBER IDENTIFICATION ASME SEC.Xt CATGY EXAH ITEM NO METHOD PROCEDURE H I 0 S ON 6T T RSEH A E I 0 E REHARKS T C G H R**CALIBRATION BLOCK**FROM AFH PUMPS A 8 AND C REF.DWG.NO.003-C46 371800 80117-H-322-09 PIPE SUPPORT F.B VI'-3 NDE 4.3.198 C X---1/31/91-VT COMPLETE F2.10**H/A**371900 80117-H-322-09 IA IHTEGRAL ATTACHMEHT 20 I 5 I I 0-A VT-3 01.20 NDE 4.3-198 C X---1/31/91-VT COMPLETE**N/A*<<372400 SR-113 ROD HANGER 29 I 1ll F-8 VT-3 F2.10 NDE 4.3-196 C X.--1/31/91.VT COMPLETE, EXAMINED AS SUPPORT 3-AFH-47<<<<N/A*<<500 3-AFH.45 ROO HANGER F-8 VT-3 F2.10 HDE 4.3-197 C X---1/31/91-VT COMPLETE**H/A**372600 80117-A-324.02 PIPE AHCHOR F-8 VT-3 F2.30 NDE 4.3-195 C X---1/31/91-VT COMPLETE<<<<N/A<<<<372610 80117-A-324-02 IA INTEGRAL ATTACHMEHT D-A VT-3 01.20 NDE 4.3-195 C X---1/31/91-VT COMPLETE**H/A**

DATE: 12/05/91 REVISIOH: 1 INCH AUXILIARY FEEDHATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTIOH,

SUMMARY

REPORT SECOND INTERVAL, THIRD PERICO, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE 99 ZONE NUMBER: 163

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAH ITEM NO HETHOD H I 0 S ONGT T RSEH A E I 0 E REMARKS PROCEDURE T C G H R**CALIBRATION BLOCK~*FROM HAIN FEEDNATER LINE DISCHARGE REF.DWG.NO.003-C47 372900 3.CSTH-143 ROO HANGER 30'6" F-B VT-3 F2.10 VT.3 CNR PNO NDE 4.3-22'I C NDE 4.3-292 91-3-016 MA910206105043

-X X-1/30/91-VT COMPLETE, NUT ON TOP OF CLAMP IS NOT FLUSN HITH CLAMPI 6/10/91 VT RE-EXAM COMPLETE**N/A**373000 80117-A-321-01 ANCHOR 30'64 F-B VT.3 NDE 4.3-222 C X---1/30/91-VT COMPLETE F2.10**N/A**373100 80117.A-321-01 I A INTEGRAL ATTACHMENT 30'64 0-A VT-3 NDE 4.3-222 C X---'I/30/91-VT COMPLETE 01.20**N/At%

DATE: 12/05/91 REVISION: 1 INCH AUXILIARY FEEDNATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 100 ZONE NUMBER: 163

SUMMARY

EXAMINATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEH HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK*>>FROM MAIN FEED'IIATER LINE DISCHARGE REF.DUG.NO.003-C47 373300 80117-H-321-03 U-BOLT RESTRAINT 30 I6II F-B VT-3 NDE 4.3-223 F2.10 C X---1/30/91-VT CCMPLETE, LIGHT RUST INSIDE SADDLE OH U-BOLT**N/A**373600 80117-R-321-01 BOX RESTRAINT 37'10" F-8 VT-3 F2.10 NDE 4.3.224 C X---1/30/91-VT COMPLETE**N/A**373800 80117-H-321.01 SPRING SUPPORT 41 I6u F-C VT-3 F3.50 VT~4 NDE 4.3.225 C X---1/30/91-VT COMPLETE(RUST OH SPRING CAN a*N/A**74000 80117-H-321.01 IA INTEGRAL ATTACHHEHT 41'6" 0-A VT-3 D1.40 NDE 4.3-225 C X---1/30/91-VT COMPLETE**H/A*4 DATE: 12/05/91 REVISION: 1 INCH AUXILIARY FEED'IIATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECT IOH

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 101 ZONE NUMBER: 170

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC~XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**FROM VALVE AFPD-001 8 AFPD-002 REF.DUG.NO.003-C56 380300 80'117-H-320-06 BOX RESTRAINT 38'4" F-8 VT-3 HDE 4.3-226 C X---1/31/91-VT COMPLETE F2.10**N/A*~380500 80117-H-320.08 DUAL RIGID STRUI'7'4" F-C VT-3 F3.10 VT-3 CNR HCR PHO HDE 4.3-267 91-2821 91-3.042 N90.0125 WA910311123808 C---X 1/31/91-VT COMPLETE, NO LUBRICATION, X-RUST ON SUPPORT;9/12/91-VT RE.EXAM COMPLETE AFTER CLEANING**H/A**

DATE: 12/05/91 REVISIOH: 1 INCH AUXILIARY FEEDWATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS PAGE: 102 ZONE NUMBER: 171 SUHMARY EXAMINATIOH AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATION BLOCK**FROM AFW PUMPS DISCHARGE REF.DWG.NO.003-C57 381500 80117.A-320-04 ANCHOR 30'104 F-8 VT-3 NDE 4.3-209 C X---1/30/91-VT COMPLETE F2'0**N/A**381600 80117-H-320.20 DUAL RIGID STRUTS 29 I 6ll F-C F3~10 VT-3 VT-3 CNR PWO NDE 4.3-211 HDE 4.3-286 91-3-012 WA91 0207103716 C---X 1/30/91-VT COMPLETE, BEARING PUSHED-X OUT OF PADDLE END)4/12/91-VT RE.EXAMi BEARINGS PAINTED, NO LUBRICATION, THIS EXAM CLOSES CNR, ADDITIONAL INDICATIONS

'WILL BE FIXED AT A LATER TIME*~H/A*~381800 80117-H-320.19 RIGID STRUT 29'6" F-8 F2.10 VT-3 VT-3 CNR PWO NDE 4.3-210 HDE 4.3-293 91-3.011 WA 910206104 134 C---X 1/30/91-VT COMPLETE, MISSING LOCKING X---RING ON LOAD PIN(NO EVIDENCE OF LUBRICATION, WHITE PLASTER OVER STRUTI 6/25/91-VT RE-EXAM COMPLETE**H/A**

DATE: 12/05/91 REVISION: 1 INCH AUXILIARY FEEDWATER SYSTEM TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 3 ALL STATUS COMPONENTS ZONE NUHBER: 171

SUMMARY

EXAMINATION AREA NUMBER IDENT I F ICATION ASHE SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R~~CALIBRATIOH BLOCK**FROM AFII PUMPS DISCHARGE REF.DUG.NO.003-C57 382200 80117-H-320-16 BOX RESTRAINT 29 I 6 II F-B VT-3 HDE 4.3-208 C X-1/30/91-VT COMPLETE F2.10**H/A**

DATE: 12/05/91 REVISION: 1 n, TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, F IRST OUTAGE (1991)CLASS 4 ALL STATUS COMPONENTS PAGE: 104 GMENTED EXAMS ZONE NUMBER: N/A

SUMMARY

EXAMINATIOH AREA NUMBER I DENT I F I CAT IOH ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**64 REACTOR COOLANT LINE REF.DWG.NO.5613-P-660 900000 3-PRH-7 VT-3 INTEGRAL'WELDED PIPE SUPPORT---CHR PCM PNO HDE 4.3-275 91-3-051 90.381 HA 91031 S134 739 C---X 3/11/91-VT COMPLETE, EXPAHDED EXAMINATION DUE TO FAILURE OF ADJACENT SNUBBER, BORIC ACID RESIDUE AROUND BASE PLATE, NO HUTS HERE USED AS IDEHTIFIEO OH AS-BUILT ORAUING;TO BE RENORKEO UNDER PCM 90-3B1%*N/A*i 900005 3.RCH-26 VT-3,4 NDE 4.3-243 C---X 2/7/91-VT COMPLETE SPRING HANGER'NITH INTEGRAL---CHR 91-3.025 ATTACHMEHT PWO HA 910312131231

'a*H/A'0*

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 105 UGMENTED EXAMS ZONE NUMBER: 040

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REHARKS T C G M R**CALIBRATION BLOCK**2" HIGH HEAD SI"A" FROM 10" Sl TO VALVE 3 873 REF.DUG.NO.003-A39 900010 VALVE 3-868A BOLTING VALVE BOLTIHG VT.1 CHR PMO NDE 4.1-149 C---X 2/25/91-VT COMPLETE, 2 BOLTS AHD 2 91-3-046 HUTS, BORIC ACID LEAKIHG FROM VALVE WA910227081716 PACKING<<<<N/A<<<<

DATE: 12/05/91 REVISION: 1 GMENTED EXAMS TURKEY POINI'UCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991>, CLASS 1 ALL STATUS COMPONENTS PAGE: 106 ZONE NUMBER: 041

SUMMARY

EXAMIHATIOH AREA NUMBER IOEHTIFICATIOH ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**2>>HIGH HEAD Sl"8>>FROM 10" Sl TO VALVE 3-873B REF.DWG.NO.003-A40 900020 VALVE 3-8688 BOLTING VALVE BOLTING VT-1 CNR PNO NDE 4.1-147 91-3-044 WA910226090813 C---X 2/20/91-VT COMPLETE, 2 BOLTS AND 2 NUTS EXAMINED, BORIC ACID LEAKING FROM PACKING, CLEANED BOLTING, THIS IS AN AUGMENTED EXAM<<*H/A>>>>

DATE: 12/05/91 REVISION: 1 UGMEHTED EXAMS TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPOHENTS PAGE: 107 ZONE NUMBER: 042 SUHMARY EXAMINATION AREA NUMBER IDENT I F I CATION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE NI'S ONGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATION BLOCK**24 HIGH HEAD Sl"C4 FROM 10" Sl TO VALVE 3 873C REF.DNG.NO.003-A41 900030 VALVE 3-868C BOLTIHG VALVE BOLTING VT-1 NDE 4.1-148 C-X 2/20/91-VT COMPLETE, BORIC ACID CNR 91-3-045 LEAKING FROM VALVE PACKING, BOLTING PlJO WA910226092234 CLEANED, THIS IS AH AUGMENTED EXAM**H/A**

DATE: 12/05/91 REVISION: 1 TURKEY POINT NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 108 UGMENTED EXAMS ZONE NUMBER: 043 SUHHARY EXAHINATION AREA NUHBER IDENTIFICATION ASHE SEC.XI CATGY EXAM ITEH NO METHOD PROCEDURE N I 0 S ONGT T RSEH A E I 0 E REMARKS T C G H R**CALIBRATION BLOCK**2" HIGH PRESS.SI"A" FROM 29" RCS TO VALVE 3-866A REF.DMG.NO.003-A42 900040 3.866A VELAN VALVE BOLTING VT-1 NDE 4.1-145 C X.--2/12/91-VT COMPLETE, 2 STUDS AND 4 NUTS**H/A**

DATE: 12/05/91 REVISION: 1 UGMENTED EXAMS TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOHD INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 109 ZONE NUMBER: 044

SUMMARY

EXAMINATIOH AREA NUMBER IDENTIFICATION ASME SEC~XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S ONGT T RSEN A E I 0 E REMARKS T C G M R*"CALIBRATIOH BLOCK**24 HIGH PRESS.Sl 4B" FROM 29" RCS TO VALVE 3-866B REF.DUG.NO.003-A43 900050 VALVE 3-866B VELAN VALVE BOLTING VT-1 VT-1 CNR PMO HDE 4.1-146 NDE 4.1-162 91-3-037 IIA91 03071 53521 C---X X-2/12/91-VT COMPLETE, BORIC ACID BUILD UP IDENTIFIED DH 2 STUDS AHD 4 HUTS;5/1/91-VT RE-EXAM COMPLETE AFTER CLEANING OF BOLTING**N/A**

DATE: 12/05/91 REVISION: 1 GMEHTED EXAMS TURKEY POINT, NUCLEAR PLANT UNIT 3 INSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 110 ZONE NUMBER: 020 SUMHARY EXAMINATION AREA NUMBER IDENT I F I CAT ION ASME SEC.XI CATGY EXAM ITEM NO METHOD PROCEDURE N I 0 S OHGT T RSEH A E I 0 E REMARKS T C G M R**CALIBRATIOH BLOCK**4" RCS LIHE"8" FROM PZR TO MAIN RCS LOOP PIPE B REF.DWG.HO.003-A14 900060 4"-RC-1304 WHIP RESTRAINTS VT-3 VT-3 CHR NCR PWO HDE 4.3-144 HDE 4.3-164 91-3-033 N91-0238 WA910410102002 C X-X 2/12/91-VT COMPLETE, BORIC ACID, INCOMPLETE THREAD EHGAGEMENT, CORROSION, HOT A SECTION XI EXAM;5/13/91.VT RE-EXAM COMPLETE**N/A**

0 DATE: 12/05/91 REVISIOH: 1 UGMENTED EXAMS TURKEY POINT NUCLEAR PLANT UNIT 3 IHSERVICE INSPECTION

SUMMARY

REPORT SECOND INTERVAL, THIRD PERIOD, FIRST OUTAGE (1991)CLASS 1 ALL STATUS COMPONENTS PAGE: 111 ZONE NUMBER:

SUMMARY

EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC.XI CATGY EXAM ITEM HO METHOD PROCEDURE H I 0 S ONGT T RSEH A E I 0 E REMARKS T C G M R~*CALIBRATIOH BLOCK**HAIN REACTOR COOLANT SYSTEM REF.DUG.NO.900070 THICKNESS MEASUREMENTS CTMT UT 0 UT 0 UT 0 UT 0 UT 0 HDE 5.18-8 NOE 5.18-9 NDE 5.18-10 NDE 5'8-11 HDE 5.18-14 C X---2/7/91-UT COMPLETE,~THICKNESS X---MEASUREMEHTS ONLY X-X-X---**H/A**REACTOR COOLAHT COLD LEGS LOOPS A B AHD C REF.DUG.NO.900072 THICKNESS MEASUREMENTS UT HDE 5~18 CTMT*~I Iu 800792*>>THICKNESS MEASUREMENTS REF.DNG.NO.00080 VALVE 3-753A CHECK VALVE UT 0 HDE 5.18-12 C X---2/13/91-THICKNESS MEASUREHENTS OHLY**798394**

EXAMINATION TE8TING Visual examination (VT-3, VT-4 hand stroke)were performed on a total of one hundred and eleven (111)snubbers in and functional testing was performed on thirty one (31)snubbers.TAG¹S/H MODEL SYSTEM VT FT TEST SAMPLE CORRECTIVE ACTION 3-18015 PSA-1 1000 3-27095 PSA-3 1001 3-104 PSA-3 1002 3-29625 PSA-3 1003 3-101 PSA-3 1004 AFM SAT AFiJ SAT AFM SAT FN SAT SAT AFWSAT NONE HONE NOHE NONE YES HONE 3-10035 PSA-35 1005 3-3051 PSA 35 1006 3-4590 PSA.35 1007 3-8084 PSA-35 1008 3-1203 PSA-35 1009 3-1'1931 PSA-35 1010 3-12376 PSA-10 1011 3.8086 PSA-35 1012 3-33624 PSA-1/4 1013 3-1722 PSA.1/4 1014 3-18009 PSA-10 1015 3-18012 PSA-1 1016 3-18003 PSA-1 1017 MS MS MS MS MS MS MS RHR SIS SIS SIS SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT YES HONE NONE HONE SNUBBER llAS FOUND TO BE INSTALLED 180 DEGREES FROM DESIGN.ADDRESSED ON NCR H-91-0092'ONE NONE NONE NONE HONE NOHE HOHE SNUBBER WAS FOUND TO BE INSTALLED 180 DEGREES FROM DESIGN.ADDRESSED OH HCR H-91-0107.HONE TAG¹S/N HCOEL SYSTEN VT FT TEST SANPLE CORRECTIVE ACTIOH 3-18013 PSA-1 1018 3-1889 PSA-3 1019 3-103 PSA-3 1020 SIS SAT SIS SAT SIS SAT NONE NOHE NONE 3-16725 PSA-1/2 SIS SAT SAT 1021 YES NONE 3.18006 PSA-1 1022 3-23273 PSA-1 1023 3-17427 PSA-3 1024 3-100 PSA-3 1025 3-12394 PSA-10 1026 3-12396 PSA-10 1027 3-11135 PSA-10 1028 3.11330 PSA-10 1029 3-11121 PSA-10 1030 3-27086 PSA-3 1031 RNR SAT RNR SAT RHR , SAT RNR SAT RHR SAT RNR SAT RHR SAT RNR SAT SG SAT RNR SAT SAT NONE HONE HONE HOHE SNUBBER IIAS FOUND TO BE INSTALLED 180 DEGREES FRON DESIGN.ADDRESSED OH HCR N-91-0107.SNUBBER MAS FOUHD TO BE INSTALLED 180 DEGREES FROH DESIGN.ADDRESSED ON HCR N-91-0107.YES SHUBBER HAS FOUND TO BE IHSTALLED 180 DEGREES FRON DESIGN.ADDRESSED OH NCR H-91-0146.SNUBBER MAS FOUND TO BE INSTALLED 180 DEGREES FROM DESIGN.ADDRESSED OH HCR N-91-0146.NONE NONE 3-24410~<'SA-3 1032 3-19328 PSA-3 1033 3-24415A PSA-1 1034 3-19330 PSA-3 1035 SG SG SG SAT SAT SAT SAT HONE HONE SNUBBER NOULD NOT HAHDSTROKE, FROZEN.ADDRESSED OH HCR H-91 0208.INSTALLED SPARE S/H 24429.INSPECTED ADJACENT HANGERS 78101B.H-322-03 AND 05.NONE TAG¹S/H MODEL SYSTEM VT FT TEST SAMPLE CORRECTIVE ACTION 3-27100 PSA-3 1036 3-11922 PSA-35 1037 3-11934 PSA-35 1038 3-16241 PSA-10 1039 3-16239 PSA-10 1040 3-16234 PSA-10 1041 3-12365 PSA-10 1042 3-17899 PSA-10 1043 3-17900 PSA-10 1044 3-17905 PSA-10 1045 3-17903 PSA-10 1046 3-17902 PSA-10 1047 3-17904 PSA-10 1048 3-, 16243 PSA-10 1049 3-17906 PSA-10 1050 3-16249 PSA-10 1051 3-16233 PSA-10 1052 3-2462 PSA-10 1053 3-1"248 PSA-10'1054 SG F'lI FW FH FW FII FW RCS RCS RCS RCS RCS RCS RCS RCS RCS RCS RCS RCS SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT NONE HOHE NONE HOHE HONE HOHE HONE HONE NONE SNUBBER NXJLD NOT HANDSTROKE, FROZEN.ADDRESSED OH HCR N-91-0168.INSTALLED SPARE S/N 7782.INSPECTED ADJACENT HANGERS 3-PRH-7 AHD 3-PRH-5.NONE HOHE NONE INSTALLED SPARE S/N 16245 NONE SNUBBER llAS FOUND TO BE INSTALLED 180 DEGREES FROM DESIGN.ADDRESSED ON HCR N-91-0212.SNUBBER IIAS FOUHO TO BE INSTALLED 180 DEGREES FROM DESIGN.ADDRESSED OH HCR H-91.0212.NONE SHUBBER HAS FOUND TO BE INSTALLED 180 DEGREES FROM DESIGN.ADDRESSED ON HCR N-91-0212.

TAG'/H HODEL SYSTEH VT FT TEST SANPLE CORRECTIVE ACTION 3-1055 3-1057 3-1058 16238 PSA-10 27106 PSA-3 27102 PSA-3 RCS RCS RCS SAT SAT SAT SAT YES SNUBBER'MAS FOUND TO BE INSTALLED 180 DEGREES FROM DRA'NING.ADDRESSED OH NCR H-91-0212.FT INDICATED A HIGH ACCELERATIOH RATE OF.02g, INSTALLED SPARE S/H 13697, HOHE NONE 3-1060 3-1069 3-1070 3-1071 3-1072 3-1073 3-1074 19329 PSA-3 27072 PSA-3 27079 PSA-3 27069 PSA-3 27073 PSA-3 27090 PSA-3 27104 PSA-3 RCS RCS RCS RCS RCS RCS RCS SAT SAT SAT SAT SAT SAT SAT SAT YES NONE NONE NONE NONE NONE HONE NONE 3-1075 18074 PSA-1/2 CVCS SAT'AT YES HONE 3-1076 19275 PSA-3 CVCS SAT NONE 3-1077 3-1078 3-'l079 3-1080 3.1081 3-1082 3.1083 3-1084 16230 PSA-10 16229 PSA-10 10176 PSA-10 10173 PSA-10 11921 PSA-35 11932 PSA-35 11925 PSA-35 7000 PSA-35 FH FH FM FH FW FN FM FM SAT SAT SAT SAT SAT SAT SAT SAT HONE NONE HONE NONE NONE HOHE HONE HONE 3-1091 27087 PSA-3 CVCS SAT SAT YES NONE

9.TAG¹S/H KCOEL SYSTEH VT FT TEST SAMPLE CORRECTIVE ACTION 3-1092 27105 PSA-3 CVCS SAT NONE 3-1093 3.1094 27091 PSA-3, 27074 PSA-3 CVCS SAT CVCS SAT HOHE NONE 3-1095 3-1096 3-1097 3-1098 3-1099 16733 PSA-1/2 CClJ SAT SAT 11993 PSA-1/2 CCM SAT 16724 PSA-1/2 CCN SAT 33628 PSA-1/4 CC1I SAT 16727 PSA-1/2 CCM SAT YES NONE EXCEEDED"L" DINENSIOH ACCEPTANCE CRITERIA.NCR N-91-0209.USE AS IS~NONE NONE EXCEEDED"L" DIHENSIOH ACCEPTANCE CRITERIA.NCR N-91-0192~USE AS IS~3-1100 3.1101 3-1102 17819 PSA-1/2 33626 PSA-1/4 29451 PSA-1/4 SAT SAT SAT SAT SAT NONE YES NONE HONE 3-1103 1'1996 PSA-1/2 CVCS SAT SAT YES NONE 3-1104 3-1105 3-1106 3-1110 3-1111 3-1112 24412 PSA-1 16134 PSA-1 29495 PSA-1/4 16136 PSA-1 2875 PSA-3 270&3 PSA-3 CVCS SAT SAT CM SAT SAT CQI SAT CCM SAT SAT RHR SAT RHR SAT YES OUT OF ALIGNMENT OH THE HORIZONTAL AXIS.CORRECTED OH MA 910212153317 HOHE HONE NONE NONE NONE 3.1120 3-1121 3-1123 18325 PSA-1/2 24430 PSA.1 12988 PSA-35 CCW HS SAT SAT SAT SAT NOHE NONE NONE 10 TAG¹S/N NGOEL SYSTEN VT FT TEST SAHPLE CORRECTIVE ACl'IOH 3-12991 PSA-35 1124 3-12986 PSA-35 1125 3.12989 PSA-35 1126 3-12990 PSA-35 1127 3-12985 PSA-35 1128 3-'12987 PSA-35 1129 3.17840 PSA-10 1130 3-17837 PSA-10 1131 3-17838 PSA-10 1132 3-17841 PSA.10 1133 3-17836 PSA-10 1134 3-17839 PSA-10 1135 NS NS HS NS NS HS NS HS HS HS SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT SAT NOHE NONE NONE NONE HOHE NONE NONE HONE HONE FT INDICATEO A HICH ACCELERATION RATE~02g, INSTALLED SPARE S/H 13695.HONE NONE 3-19884 PSA-1/2 CVCS SAT 1136 3.19885 PSA-1/2 CVCS SAT 1137 NOHE HOHE

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER Ilc LIGHT Nafne P.O.BOX 029100, MIAMI, FL 33102 Date July 19 1990 Sheet 1 of 1 Address TVRKEY POINT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address Unit PWO: 1418 PC/M: 09-515 P/S: 90-236 Repar Praonization P.o.No..Job No.etc.Per for med by FLORIDA POWER Ik LIGHT Norns P.O.BOX 3000, FLORIDA CITY.FL 33034 Address 4.Identification of System Intake Coolin Type Code Symbol Stamp Authorization No.N/A Expiration Date N/A Water 5.(a)Applicable Construction Code B31 1 19 06 Edition, N/A Addenda, N/A Cpde Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, E'dition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Check Valve Name of Manufacturer TRW hiission Manufacturer Serial No.W6727 National Board No.N/A Other Identification 3-50-331 Year Built Est.1970 Repaired, Reploced, or Replocement Replaced ASME Code Stomped (Yes o.No Check Valve TRW hiission 10635 N/A 3-50-331 1909 Replacement, No 7 Descrjptipn pf'Wprk Replaced valve at, tafs location 3-50-331.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure X Other Pressure psl Test Temp Degree's p NOTE: Supplemental sheets in form of lists.sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)informotion in items 1 through 6 on this repo t is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

FORM NIS-2 (Back)Page 2 of 2 9.Remarks Quality Group"C" Applicable Manufacturer's Data Reports to be attached hfechanical connection.

No welding performed CERTIFICATE OF COMPLIANCE We certify that the statements made in the report ore correct and this p conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate o Authorization o.Signed N/A+WP~~.51/f g Expiration Date N/A 19/wner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count.Florida and employed by Arlcwri ht hfutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to February 23, 1990 , and state that to the best of my knowledge and belief~the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspect'ignature Dat~~19~Commissions Factory hiutual System 4956 N I Notional Board, State.Province.ond Cndcrsements Page 1 of 4 FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 0 FLORIDA POWER a UGHT P.O.BOX 529100 MIAMI FL 33152 Au ust 9, 1990 Sheet of Plant TURKEY POINT Name N-90-0077 P.O.BOX 3088 FLORIDA CITY FL 33034 hddreee Repair Organhatbn P.O.Hodob No., eta.Un<<C 3.Work Performed by B C Type Code Symbol Stamp Authorization No P.O.BOX 3218 FLORIDA CAY FL 33034 Expiration Date N A hddreee Steam Generator Wet Lay-up System 4.Identification of System/(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer-Manufacturer Sorlal Ho.National Board Na.Other Id~nNIcatlon Repaired, Replaced, or Replacement ASME Cade Stamped (Yee or Ho Gate Valve N/A N/A N/A SGWL-3-007 1970 Replaced No Gate Valve Henry Vogt Machine Co, 3-215515 N/A SGWL-3-007 1987 Replacement No Gate Valve N/A N/A N/A EST.SGWL-3-025 1970 Replaced No Gate Valve Gate Valve Gate Valve Henry Vogt Machine Co.N A Henry Vogt Machine Co.6-215515 N A 5-215515 N A SGWL-3-025 1987 N A EST.SGWL-3-042 1970 N/A SGWL-3-042 1987 Re laced No Replacement No Re lacement No Globe Valve N/A N/A N/A EST.SGWL-3-011 1970 Replaced No Replaced the Isolation Valves in the Stm.Gen.Wet Lay-up System.7.Description of Work Code Case N-416 invoked for welds associated with the installation of valves (Cont.on Sht.2)8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other*+Pressure 1370/1315 psl Test Temp N/A egree's F**FW's for Valves SGWL-3-011, 3-031 and 3-049.*System Functional Test for FW's for SGWL-3-007, 3-025 and 3-042.NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size ls 8 1/2 in.X 11 fn., (2)information in items 1 through 6 on this report Is included on each sheet, and (3)each sheet ls numbered and the number of sheets ls recorded at the top of this form.

FORM NIS-2 (Sack)Page 2 oE 4 Examinations performed by FPL Construction Quality Control personnel, Itppltcoble Lfanafachrw'e Data Reports to be attached All welding was performed in accordance with the FP&L Weld Control Manual and Site Procedures.

Quality Group"8".CERllFICAfE OF COMPUANCE We certify that the statements made fn the report are correct and this conforms REPLACEMENT to tho rules of the ASME Code,Section XI.ropa r or rep acemon Typo Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date Signed 5i7C iwrt4Hcrc t~Owner or Owner's Designee, Me Igi~'i CERIIFICATE OF INSERVICE INSPECHON I, tho undersigned, holding a valId commission Issued by the National Board of Boflor and Pressure Vessel Inspectors and tho State or Province of'Dade Coun Florfda Arkwrl ht utual Insurance Com and employed by havo Inspected the components descrfbod ln thfs.Owner's Report during the perfod 47 to Jcl 8'F and state that ta the best of my knowlodge and belief, the Ownor has performod examinations and taken corrective measures described fn this Owner's Report In accordance with the requirements of ASME Code.Soctfon XI.By signing this cortlcate neither the inspector nor his empfoyer makes any warranty, expressed or implied, concorning the examfnatfons and corrective measures descrfbed In this Owners Report.Futhermore, nelthor the inspector nor hfs employor shall be liable fn any manner for any personal lnjuty or property damago or a toss of any kind arfsfng from or connoctod with this Inspection.

Factory Mutual System Commissions 4956 Hottonol Boon!, Stats, Provtnos, ond Enctclsements

>s~o o e s~o~r o~, s y 0 0 0~~~0~I~Io.I~~~II~I~~~~I~I~I I I~~~o I,~~~~~~~~~~~~~~I~~~~~I~~~~~'~~~'~'~~~~I~~~~~~~~~~I a~~~~'~~~'~~~~~~'~'~~~~~~~~~~~~~~~~~~~~~~~~~I~~~~~~~~i i NS RI.Rm.~~l~'85 L ES L L t~~~I~~~0~0~~~~I~~II I~~~~~~

0' FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Page 4 of 4 Au ust 9 1990 P.O.BOX 529100, MIAMI FL 33152 Sheet 3 of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Unit N-90-0A7 CWO: 300077 PCM: 86-077 PS-90-82(Repair Organization P.O.No Job Ne..etc.Type Code Symbol Stamp Authorization No Expiration Date hdd rose 4, Identification of System Steam Generator Wet La-u S stem 3.Work Performed by BECHTEL CONSTRUCTION INC.P.O.BOX 3218 FLORIDA CflY FL 33034 N A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Idontificatlon of Components Repaired or Replaced and Replacement Components Name of Component Home of Manufacturer Manufacturer Serial No.National Board No.Other IdentNcotlon Ro paired, Repfocod, or Replacement ASME Code Stamped (Yoe or No)7 Description of Work Existing piping to Valve SGWL-3-049 was repaired by light buf f ing.ness.

Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Date August 10, 1990 Sheet I of 1 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Unit PWO: 1038 Repar Crganization P.O.No..Job No.et>>.Performed by FLORIDA POl ER&LIGHT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Dote N/A N/A N/A 4.Identification of System Reactor Coolant System 5.(a)Applicable Construction Code B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Valve Name of Manufacturer Copes Vulcan Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-455A Year Built Est,.1970 Repaired, Replaced, or Replacement Replaced ASME Code Stamped (Yes or No 7 Desci iption of'Work Replaced the blind flange studs and nuts in the abandoned valve body located in the pressurizer spray line.tag location 3-455A.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure 2335 psi Test Temp Degree's F 547'CS Overpressure Test per OP 1004.1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 1lin., (2)information in items,1 through 6 on this report is included on each sheet, ond (3)each sheet ts numbered and the number of sheets is recorded at the top of this form.

FORM NIS-2 (Back)Page 2 of 2 9 Remarlcs Quality Group"A" Applicable Manufacturer's Data Reports to be attached Mechanical connection.

No welding performed CERTIFICATE OF COMPLfANCE We certify that the statements made in the report are cori'ect and this p conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authoriza io o.N/A Expiration Date N/A Signed'wner or Owner's Oesitinee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count~Florida and employed by Arkwri ht hfutual Insurance Com an of Norwood, hfA.hove inspected the components described in this Owner's Report during the period to hfay 19, 1990 , and state that to the best of my knowledge and belief.the Owner has performed examinations and taken corrective measures d'escribed in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinotions and corrective meosures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in ony manner for any personal injury or property damage or a loss of any kind orising from or connected with the inspection.

In ctor's Signature Commissions Factory hfutual System 4956 N I National Board.State, Province.ond fndorsements Dat 19 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, hfIAhfl, FL 33102 Dote September 11.1990 Sheet I of 1 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Unit PWO: 2459 NCR: 89-0232 Repa'r Organization P.O.No..Job No.etc.3.Work Performed by FLORIDA POWER fk LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.N/A Expiration Date N/A 4.Identification of System Chemical and Volume Control 5.(a)Applicable Construction Code ANSI B31 I 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National 0th Identification No.Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No CVCS Piping N/A N/A N/A N/A Est.1970 Replacement No 7 Q'f'W rk Replaced defective section of piping.Support, hfK<4~integral attachment weld had to be removed and rewelded to facilitate installation of new i in 8.Tests Conducted:

Hydrostatic

" Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp gg Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used.provided (1)size is 8 1/2 in.X 1lin.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded ot the top of this form.90-001-3 FORM NIS-2 (Back)Page 2 of 2 9.Remorks Quality Croup"9" Applicobie Manufacturer's Data Reports to be attached All welding performed in accordance with the FP&L ill'eld Control hfanual and site procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this eP conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stomp N/A Certificate of Authori atio o.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title~19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a volid commission issued by the Notional Boord of Boiler ond Pressure Vessel Inspectors and the State or Province of Dade Count, Florida ond employed by Arlcwri ht hiutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to August 22, 1990 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirementsof ASM'ode,Section XI.By signing this certificate neither the inspector nor his employer makes any worranty, expressed or implied, concerning the examinations ond corrective measures described in this Owners Report.Furthermore.

neither the inspector nor his employer shall be liable in any monner for ony personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dot Inspec s Signotwe 19~O Commissions Factory mutual System 4956 N I National Board.State, Province.and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Ownef FLORIDA POWER dc UGHT P.O.BOX 529100 MIAMI FL 33152 hddreee Date 1-1-0 Sheet 1 of p(ant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Unit CMO:200054 PCM:89-046 NCR-C-0690-87 MPIL:90-056M Repolr Oraonhotion P.O.No Job No, eto.Type Code Symbol Stamp Authorization No Expiration Date N A 3.Work Performed by CON P.O.BOX 3218 FLORIDA CllY FL 33034 hddreee 4, Mentification of System Reactor Coolant S stem'/-~'/(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Snubber Snubber Snubber Name of Manufacturer Pacific Scientific Pacific Scientific Pacific Scientific Manufacturer Serial No.116'7902 16242 National Board No.N/A N/A N/A Other ldenNication FPL Tag'-1047 FPL Tag'/3-1047 FPL Tag'-1048 Year Built N/A 1989 1983 Repaired, Replaced, or Replacement Replaced Rep'lacement Replaced ASME Code Stamped (Yee or No Yes No Yes Snubber Snubber Snubber Pacific Scientific Pacific Scientific Pacific Scientific 17904 16243 N/A N/A N/A FPL Tag/!3-1048 FPL Tag 3-1049 FPL Tag 3-1049 1989 N/A 1983 Replacement No Replaced Yes Replac'ement Yes 7.Description of Work nubbers with PSA-10 15Ki snubbers, on the Pressurizer Relief Line between the pressurizer and the pressurizer control valve 3-456.Support No.3-PRH-5 modified to accomodate replacement snubbers.8.Tests Conducted:

Hydrostatto Pneumatic~ttomtnal Operating Pressure Other N/tt Pressure psl Test Temp.egree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1i2 in.X 11 ines (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.90-002-3 FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.

Pypbcchle Lfonrrtoctrrrer'e Dote Reporte to be ottoched All welding performed in accordance with the FP&L Weldin Control Manual Quality Group A CERTIRCATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp eI/A Certificate of Authorization No.N A Expiration Date Signed:sire~~a+Owner or Owner's Designee, Title Date/O-Iu CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described In this Owner's Report during the period C7 to A 4 ZS 5 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described fn this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable ln any manner for any personal Injury or property damage or a foes of any kind arising from or connected with this inspection.

~SI9 nehru cate>/r>9~0 Factory Mutual System Commissions 4956 N I NatJonal Boonl, State.Pmvtnoe, ond&doreemente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.Owner FLORIDA POWER Sc LIGHT Date DECEMBER 31.1990 Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Sheet 1 of Unit PWO:2166 PCM:90-339 P/S:90-1299 NCR-C-0920-87 Raper Organization P.O.No..Job No.eta.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A Spent Fuel Pit Cooling 4.Identification of System 5.(a)Applicable Construction Code'9 Edition,.Addenda, Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification H-690-05 Year Built Est.1970 Repaired, Replaced, or Replacement Replacement ASME Code Stomped (Yes or No)No 7.Description of Work Removed and re laced i e lu s on i e su ort H-690-05 due to weld discrepancies.

8.Tests Conducted:

Hydrostatic

-Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's F N/A)0-trt Og NOTE: Supplemental sheets in form of lists, sketches, or drawings moy be used, provided (1)size is 8 1/2 in.X 11in., (2)informotion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

FORM NiS-2 (8 ck)Page 2 of 2 9 Remarks Quality Group"C" Applicable Manufacture"s Ooto Reports to be attached All weldin erformed in accordance with the FPAI, 11leld Control hfanual and Site rocedures.

CERTIFICATE OF COMPLIANCE tIIe certify thot the statements mode in the report ore correct ond this ep conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate o A Signed ization No.N/A Expiration Date Date~HA N/A Owner or Owner's Designee.Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a volid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Stote or Province of and employed by Aricwri ht hfutual Insurance of Norwood.hfA.have inspected the components described in this Owner's Report during the period to December 11.1990 , and state that to the best of my knowledge and belief, the Owner has performed examinations and token corrective meosures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer mokes any warranty, expressed or implied, concerning the exominations and corrective measures described in this Owners Report.furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

inspector's Signature Dater" a v t9~Commissions Factory hiutual System NB7719 National Board, State.Province.ond E'ndorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 4 UNfT.P.O.BOX 029100 MIAMI FL 33152 January 19, 1991 8 hast of 1 1 2 Plant TURKEY POINT'ome P.O.BOX 3088 FLORIDA CIIY FL 33034 Unit CW'2 1 MPIL-M 3.Work Performed by Type Code Symbol Stamp Authorization No 0 3 1 I Expiration Date Spent Fuel Pool Cooling System 4.IdentNcatlon of System ANSI B31.1 1986 Ed.AStfU III 1980, Summau 1981 5.(a)Applicable Construction 831'1~1967 Edition;N A denda N A Code C se (b)Appllcablo Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Wlntor 1981 Addenda 6.Identification of Compononts Repafred or Replaced and Replacement Components Repelssd, Repleoed, or Replectement 10" Gate Valve 4" Gate Valve SFP Cooling Piping Anchor Darlin Vlv Crane-Alo co N/A E-6370-2-1 2723088 N/A N A N/A 3-1 N/A la m 1990 Replacement No No 7.Descrlptfon of WcHk modified Supports-H-690-08 and H-690-10.S.Tests Conduateh HfdrastaUo

[g PnaumaUa ffomlnaf OpeuUn9 Premura othar P Pressure 167 60 NOTE: Supplomontal sheets in form of lists, sketches, or drawings may be used, pre8dod (1)size Is 8 1/2 In.K 11 in., (2)Info'imation'ln IteIns 1 through 6 on this report ls Included.on each sheet,"and (3)each sheet Is numbered and the number of sheets ls recordod at the top of this form.LC6~'lj-CCI-3 FORM NlS-2 (Back)Page 2 of 2 Examinations performed by FPI.Construction Quality Control personnel, g~e QaoafochnCa Oota Ibpocte io bo ethatwf All welding was performed in accordance with the FP&L Weld Control Hanual and Site Procedures.

Quality Group"C".CER1IFICAlE OF COMPLIANCE Vfe certify that tho etatemonte made In the report are correct and thle REPLAC BKNT ta the ru}ee of the ASME Code,Section XI fepa or Type Code Symbol Stamp Certlflcate of Authorhatbn Na N/A Z-/g, qg'Pl I, tho undersigned, holding a valid commleelon Ieeued Inspoctore and tho State or Province of tho National Board of Belier and Preeeuse Yeeeel and employed by Mutua ra af MA.have lnepected the components deecrlbod ln thle Owner'e Repaft during the period O

'Revised Copy FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requifed by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGIIT Nome P.O.BOX 029100, MIAMI~FL 33102 Date March 13, 1991 Sheet 1 of I Address TURKEY POINT Name P.O.BOX 3008, FLORIDA CITY, FL 33034 Address Unit PWO: 2754 NCR: 90-0110 Repor Organization P.o.No..Sab No.ete.Work Performed by FLORIDA POWER&LIGHT Nome P.O.BOX 3000.FLORIDA CITY, FL 33034 Address 4.Identification of System Residual Heat, Type Code Symbol Stamp Authorization No.N/A Expiration Date N/A Removal 5.(a)Applicable Construction Code ANSI B31 1 1955 Edition, N/A Addenda, N/A Code Case (b)Applicoble Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component RHR Piping Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification PS-54 Year Built Est.1970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or No No Pescription of'Work Variable SPring SuPPort MK¹PS-54 was found to be out of tolerance.

Reset SPring Can to its ro er cold load settin 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's F NA Expiration Date Date N/A , 19~/er or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and'Pressure Vessel Inspectors and the State or Province of Geor ia and employed by Arkwri ht hfutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to February 22, 1991 , and state that to the best of my knowledge and belief~the Owner has performed examinotions and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any monner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspector's Signature Commissions Factory hfutual System 4175 N I National Board, State, Province, and Endorsements Dat/19

'Revised Copy FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, hiIAhil.FL 33102 Dote hiarch 13, 1991 Sheet 1 of 1 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Unit PWO: 2766 NCR: 90-0093 Repar organization P.O.No..Job No.etc.3.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.N/A Expiration Date N/A 4.Identification of System Component Cooling Water 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition,, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component CCW Piping Name of Manufacturer Manufacturer Serial No.N/A National Board No.N/A Other Identification SR-308 Year Built Est.'970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or No No 7 Description of Work variable Spring Support hIKtt SR-308 was found to be out of tolerance.

Reset S rin Cans both to its ro er cold load settin.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure pst Test Temp Degree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded ot the top of this form.91-003-3 FORM NIS-2 (Back)Page 2 of 2 9 R~~~~k~Quality Group"C" Applicable Manufacturer's Data Reports to be attached hiechanical connection, No welding performed.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair repa'r or replacement conforms Type Code Symbol Stamp N/A Certificate of Author zat'o.N/A Expiration Date N/A Signed ner or Owner's Designee, Title't/l I Dote , 19~1 CEATIFICATE OF INSEAVICE INSPECTION I, the undersigned, holding a valid commission issued by the, National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Geor ia and employed by Arkwri ht hiutual Insurance Com an of Norwood.hiA.have inspected the components described in this Owner s Report during the period'u"y to February 22.1991 , and state thot to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

lns actor nature Date c~i(l9 Commissions Factory hiutual System 4175 N I Notional Board, State.Province.and Endorsements

'Revised Copy FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Nome P.O.BOX 029100, hiIAMI, FL 33102 Dote hiarch 13.1991 Sheet 1 of 1 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Unit PWO: 2776 NCR: 90-0116 Repo'r Orgonizotion P.O.No..Job No.etc.Work Performed by FLORIDA POWER&LIGIIT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address 4.Identification of System Chemical and Type Code Symbol Stamp Authorization No.N/A Expiration Date N/A Volume Control 5.(a)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component CVCS Piping Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification SR-43 Year Built Est.1970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or No No 7 Description of Work Variable Spring Support, hid SR-43 was found to be out of tolerance.

Reset Spring Can to its ro er cold load settin.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Tersp Degrer/s F'/S NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-004-3 FORM NIS-2 (Back)Page 2 of 2 g.Remarks Quality Croup"A" Applicable Manufacturer's Data Reports to be attached hfechanical connection, No welding performed CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI repair repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorization No N/A Expiration Dote N/A Signed Af~i S ner or Owner's Designee, Title Dote 19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ceor ia and employed by Arlcwri ht hfutual Insurance Com an of Norwood.hfA have inspected the components described in this Owner s Report during the period F'"'u"y to February 22.199 1~and state that to the best of my knowledge and belief the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore neither, the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection Inspector's Signature Dol~rr 19~Commissions Factory hfutual System 4175 N I Notional Board.State.Province.and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl O n r FLORIDA POWER dc UGHT.P.O.BOX 029100 MIAMI FL 33152 e 03/18/91 Uheet t of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CflY FL 33034 Unit CMO: 300351-1305 Roper Organkzaeon pAL Mo Job Hoeto.Type Code Symbol Stamp Authorization No Expiration Date 3.Work Performed by RepaIUUpd, Replaced, or Replacement lo.318 OI C 4.Identification of System Quality Group: A B X C'.~*(b)Applicable Ed'rUon of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced ond Replacement Components RHR Piping S stem N/A N/A N/A N/A Re lacement No 7.Description of Work'u ort SR-5 b re 1acin base late.U.Tests Conducted:

HydrostaUo PneumaUa ttomtnal Oporadng Pressure Other Pressure psl Test Temp.ree's F NOTE: Supplemental sheets lauform of lists, sketches, or drawings may be used, pmv/ded (1)size ts 8 1/2 ln.t X 11 In(2)Information ln items 1 through 6 on this report kU included on each sheet, and (3)each sheet ls numbered and the number of sheets Is recorded at the top of this form.91-005-3 FORM NIS-2 (Back)Page 2 of 2 e Examinations performed by FPL Construction Quality Control personnel.

hplreooble btonrrfoctrrrer'e Octo ltsporte to be tttoched accordance with the FP 8 L Weld Control Manual and'te rocedures.

CERllFlCATE OF COMPUANCE We certify that the statements made in the report are correct and this Re l aCement to the rules of the ASME Code,Section XI.repo I or rep ocemen conforms Type Code Symbol Stamp N/A CerUficate of AuthorizoUon No.>I r E WA.dR EC.Owner or Owner's Designee, TrUe CERllFlCATE OF INSERVICE INSPEC1ION I, the undersigned, holding a valid commission issued by the NOUonal Board of BOOer and Pressure Vessel inspectors and the State or Province of~/8+r<and employed by Arkw ht Mutual Insurance Com of Norwood MA./have inspected the components descrIIsed ln this Owner's Report during the perksd rd dr9.22.to Pre.Zz, rSr's and state that to the best of my knowledge and belksf, the Owner has performed examinations and taken correcthre measures described in this Owner's Report in accordance with the requirements of ASME Code, SecUon Xi.By signing this cerUfkxrte neither the Inspector nor his empksyer makes any warranty, expressed or implied, concerning the examinaUons and correcUve measures described In this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal In)ury or property damage or a loss of any ldnd arising from or connected with this InspecUon.

hepector'e Sgnotare Dot&>~~19 9's Factory Mutual System C mI~k ns Monol 8oord, Stabs.lrovtnoe, ond Errdareernente FORM NIS-2 OWNER'S REPORT FOR REPAIRS'OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Nome P.O.BOX 029100, MIAMI~FL 33102 Dote March 26, 1991 Sheet 1 of 1 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Unit PWO: 2745 NCR: 90-0078 CNR: 90-3-0014 Repai'raanizotion P.O.No..Job No.etc.3.Work Performed by FLORIDA POWER 8 LIGHT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address 4.Identification of System Type Code Symbol Stamp Authorization No.N/A Expiration Date N/A 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufactur er Manufacturer Serial No.National Board No.Other identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or FW Piping N/A N/A N/A 14"-FWC-2305-21 Est.1970 Repaired No 7 Descri tion of Work RePaired, by flaPPing, one (1)linear indication adjacent to FWu 2 1.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp Degrers F N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-006-3 FORM HIS-2 (Back)Page 2 of-2 9 Remarks Quality Group"8" Applicoble Manvfoctvrer's Data Reports to be attached No welding performed.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this P'onforms repar or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorizatio Ho.N/A Expiration Dote N/A Signed Owner or Owner's Designee.Title Date CERTIFICATE OF INSERVICE INSPECTION I.the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwrieht hiutual Insurance Com an Georgia and employed by of Norwood.hfA.have inspected the components described in this Owner's Report during the period to February 22.1991 , ond state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinotions ond corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer sholl be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspector's Signature Dai e ar 19~I Commissions Factory Mutual System 4175 N I National Board.State.Province.and Endorsements FORM NIS-2 OV/NER'S REPORT FOR REPAIRS OR REPLACEMENTS

.As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100.,!tIIAitli, FL 33102 Address TURKEY POINT Name P.O.BOX 3088.FLORIDA CITY, FL 33034 Address April 19, 1991 Sheet I of Unit 3 PWO: 2281 NCR¹N-91-0050 CiVR¹91-3-002 Repor argonizaten P.O, No., Job No.et>>.Work Performed by FLORIDA POWER 0 LIGHT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address-Type Code Symbol Stamp Authorization No.Exp ir at ion D a te N/A N/A N/A 4.Identification of System Safety Injection System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda.N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Piping SIS Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No., N/A Other Identification Line¹2"-SI-1303-8 Year Built EST.1970 Repaired.Replaced, or Replacement Repaired ASME Code Stamped (Yes or Na)No 7.Description of Work Repaired, by grinding.one (1)linear indication adjacent to FW¹8, on coupling down stream from valve 3-868C.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure p st Test Temp Degree's F N/A t NOTE: Supplemental sheets in form of lists.sketches, or drawings may be used, provided (1)size's 8 I/2 in..X 11in., (2)information in items I through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-007-3 FORM HIS-2 (Back)Page 2 of 2 N o welding performed.

9.Remarks AppliCable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code.Section XI.repair repair or replocement conforms Type Code Symbol Stamp N/A Certificate of Authorizatio No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Oate CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Florida and employed by Art wri ht Mutual Insurance Com an of Norwood.MA.hove inspected the components described in this Owner s Repo t during the period'n"'ryo March 28, 1991~and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisin from or connected with the inspection.

inspector's Signa ure Dot~192L Commissions Factory Mutual System NB7719 National Board.State, Province.and Endcrsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS:

As Required by the Provisions of the ASME Code Section XI 2.Plont FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT No me P.O.BOX 3066, FLORIDA CITY, FL 33034 Address April 30.1991 Sheet 1 of Unit PWO: 0716 NCRtt N-91-0156 CNRtt 91-3-007 Repo'g'rganization P.O.No., Job No.etc.Work Performed by FLORIDA POWER 8c LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Dote N/A N/A N/A 4.Identification of System Steam Generator Blowdown Quality Group 5.(o)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda.N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping SGBD Name of Manufacturer Manufacturer Serial No.N/A National Board No.'/A Other Identification Linett 6"-BDC-2306-FW3 Year Built EST.1970 Repaired, Replaced, or Replacement Repaired ASM'ode Stamped (Yes or No)No Repaired, by buffing, one (1)linear indication adjacent to FWst 30.7.Description of Work 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operoting Pressure Other~'ressure psi Test Temp Degree's F N/rt t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-006-3

.FORM NIS-2 (Back)Page 2 of 2 9 Remarks No welding performed.

AppIicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report ore correct, and this to the rules of the ASME Code,Section XI.rePair conforms repair or replacement Type Code Symbol Stamp N/A Certificate of Authoriza on No.N/A Expiration Date Signed Owner or Owner's Designee, Title Date ,'19~%CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht hfutual Insurance Com an of Norwood.hfA.hove inspected the components described in this Owner's Report during the period to hfarch 27, 199'1 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

In actor's Signoture Dat++~19'ZL Commissions Factory hiutual System 0230 N I National Baord, State, Province, and Endcrsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requit'ed by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, hfIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address hfay 11, 1991 Sheet 1 of Unit PWO;2288 NCR¹N-91-0195 CNR¹91-3-024 Repar Organization P.O.No..Job No.etc.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Steam Generator Blowdown Quality Group 5.(a)Applicable Construction Code ANSI B31 I 19 55 Edition, N/A Addenda, N/A Code Case (6)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Repaired, Year Built or Replacement ASME Code Stamped (Yes or No)Piping SGBD N/A N/A N/A Line¹6"-BDC-2303-FW2 EST.1970 Repaired No Repaired, by buffing, two (2)linear indications adjacent to FW¹29.7.Description of Work 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's F~N/tt NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 I/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-009-3

.FORM HIS-2 (Back)Page 2 of 2 9 Remorks No welding Performed.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMP UANCE We certify that the statements made in the report are correct.and this to the rules of the ASME Code,Section XI.rePair conforms repa'r or replacement Type Code Symbol Stamp N/A Certificate of Authorizat' No.N/A Expiration Date N/A Signed Owner or Owner's Designee.Title Date 19 d4f CERTIFICATE OF INSEAVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Arkwri ht hfutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to A ril 9.1991.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor.his employer shall be liable in any monner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dat+>19 fnsp tor's Signature Commissions Factory hfutual System 0230 N I Notional Board, State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, hiIAhil, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address$.Work Per formed by FLORIDA POWER 8 LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address June 7, 1991 Date Sheet 1 of Type Code Symbol Stamp Authorizotion No.Expiration Date N/A N/A N/A Unit PWO: 2313 CNRts 91-3-031 Repas Organization P.O.No., Job No.etc.4.Identification of System Component, Cooling Water Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping CCW Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-ARH-114 Year.Built EST.1970 Repaired, Replaced, or Replacement Replacement ASME Code Stamped (Yes or No)No f'W k Replaced, four (4)missing lock nuts on Support, hfarko 3-ARH-1 14 7.Description of Work 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp Degree's F N/rt t NOTE: Supplem'ental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-010-3 FORM NIS-2 (Back)Page 2 of 2 9 Remarks hiechanical Connection,No welding performed Applicable Monufacto er's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the stotements made in the report are correct and this P conforms to the rules of the ASM'ode,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization o.N/A Expiration Dote N/A Signed Owner or Owner's Designee.Title Dote , 19~1 CERTIFICATE OF INSERVICE INSPECTION I.the undersigned, holding o valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Aricwri ht Mutual Insurance Com an of Norwood.hiA.hove inspected the components described in this Owner s Report during the period'u"yo A ril 23.1991~and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASM'ode,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore.

neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of ony kind arising from or connected with the inspection.

lnsp ar's Signature Commissions Factory hiutual System 0230 N I Notional Board.State.Province.and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, hIIAhil, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address June 7, 1991 Sheet 1 of Unit 3 PWO: 9056 CNR¹91-3-039 Repas Organization P.O.No..Job No.etc.Work Performed by FLORIDA PO ER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Containment Spray System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufactur er Serial No.National Board No.Other Identification Year Repa'red, Built Replaced, or Replacement ASME Code Stamped (Yes or No)Containment Spray Pt ing N/A N/A N/A hIK¹SR-165 EST.1970 Repaired No f W k Spring Can Support hIK¹SR-165 was found to be out of tolerance.

Reset Spring Can 7.Description of Work to its proper cold load setting.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's r N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used.provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-011-3 FORM HIS-2 (Back)Page 2 bf 2 hiechanical Connections, No welding performed.

9.Remorks AppIicoble Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code.Section XI.rePair'onforms repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization N/A Expiration Date N/A Signe Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Arkwri ht hfutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to hiay 6.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

nspect Signature Dat Z 19~/Commissions Factory hiutual System 6230 N I National Board.State, province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER Ik LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Date June 7.1991 Sheet 1 of Unit PWO: 2308 NCRss N-91-0372 CNRtt 91-3-052 Raper Crganization P.O.No..Jotg No.etc.Work Performed by FLORIDA POWER&LIGHT Norns P.O.BOX 3088.FLORIDA CITY, FL 33034 Address 4.Identification of System Reactor Vessel Type Code Symbol Stamp Authorization No.Expiration Date System N/A N/A N/A Quality Group A 5.(a)Applicable Construction Code A ME E 19 65 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identificotion Repaired, Built Replaced, or Replacement ASM'ode Stamped (Yes or No)Reactor Vessel Babcock 8c Wlicox 610-0116 N-160 3PSRV1 1969 Repaired Yes Repaired, by grinding, several linear indications on the Reactor Vessel 7.Description of Work Head Flange weld.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 I/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-012-3 FORM NlS-2 (Back)Page 2rof 2 No welding performed.

9.Remarks Applicable Manufactwer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this 4 to the rules of the ASME Code,Section XI.repair repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorization N/A Expiration Date N/A Signed Owner or wner's Designee.Title Date r./'a.19~+CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arlcwri ht Mutual Insurance Com an Norwood.MA.have inspected the components described in this Owner's Report during the period to Ma 8, 1991.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property~damage or a loss of any kind arising from or connected with the inspection.

Dot+19 Insp or's Signatwe Commissions Factory Mutual System 8230 N I Notional Board, State, Province, and Bndorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Date June 8, 1991 Sheet 1 of Unit 3 PWO: 9061 CNR¹91-3-012 Raper Organization P.O.No..Job No.ete.3 Work Performed by FLORIDA POWER&LIGIK Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Auxiliary Feedwater System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Repaired, Bu,lt RePlaced or Replacement ASME Code Stamped (Yes or No)Piping AFW N/A N/A N/A 80117-H-320-20 EST.1970 Repaired No 7 Description of Work RePaired SPherical bearing on the south toP strut, of SuPPort MK¹80 1 17-H-320-20 due to the bearing not be seated in the paddle.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp'egree's F N/rt t NOTE: Supplemental sheets in form of lists, sketches, or drawings ray be used, provided (1)size is 8 1/2 in.X 1lin., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-014-3

, FORM NIS-2 (Back)Page 2 of 2 Mechanical connection, No welding performed.

9.Remarks Applicoble Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorizatio No.N/A Expiration Date N/A Signe Owner or Owner's Designee.Title Date C it&.19~9 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Artcwri ht Mutual Insurance Com an of Norwood, MA.have inspected the components described in this Owner s Repo t during the period"'u"y to Ma 6, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI.By signing this certificate neither the inspector nor his employer makes any warranty,'expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Ins ctor's Signature D.t~<<19+>>Commissions Factory Mutual System 0230 N I National Board, State, Province.and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, hfIAhfi, FL 33102 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address June 8, 1991 Sheet 1 of Unit PWO: 2312 CNRss 91-3-047 Repai'rganization P.O.No..Job No.eta.3'Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A 4.Identification of System Steam Generator Blowdown System Quality Group B 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer'erial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Piping SGBD N/A N/A N/A 78101B-H-322-07 EST.1970 Repaired No f Wk During ISI examination of Support hid 78 1 01B-H-322-07, the pipe clamp was found 7.Description of Work to be loose and slipped 1 inch of center line.Adjusted and tightened clamp nuts.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure ps i Test Temp Degree's F N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-013-3

, FORM NIS-2 (Back)Page 2 of 2 hfechanical connection.

No welding performed.

9.Remarks Applicable Manufacturer's Dato Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct, and this to the rules of the ASME Code,Section XI.repair repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorization o.N/A Expiration Date N/A Signe Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Aricwri ht hiutual Insurance Com an Dade County.Florida of and employed by Norwood, MA.have inspected the comporpnts described in this Owner's Report during the period to A ril 23.f991 , and state that to the best of my knowledge and belief, the Owner has perfor ed examinations and taken corrective measures described in this Owner's Report in accordance with he requirements of ASME Code,Section XI.By signing thjs certificate neither the inspector nor his employer makes any worranty, expressed or implied.concer ing the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

in ctor's Signature Dat~O 19 Commissions Factory hfutual System 8230 N I National Board, State, Province.and Endorsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER IIc LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address June 26, 1991 Sheet 1 of Unit PWO: 2307 NCR¹N-91-0234 CNR¹91-3-020 Repai'rganizotion P.O.No..Job No.etc.Work Performed by FLORIDA POWER Itt LIGHT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Dote N/A N/A N/A 4.Identification of System Reactor Coolant System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping RCS Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-RCH-31 Year Built EST.1970 Repaired, Replaced, or Replacement Replacement, ASME Code Stamped (Yes or No)No 7 DW k During ISI examination of Support MK¹3-RCH-31~the rod and clevis assembly lock e nuts were found loose.Tightened lock nuts and replaced missing clamp lock nuts.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure ps l Test Temp Degree's F N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-015-3

.FORM NIS-2 (BCICk)Page 2 of 2 Mechanical connection, No welding performed.

9.Remarks Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct ond this P conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authori tio No N/A Expiration Date N/A Signe>~44 Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and erllpioyed by Arkwri ht Mutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner's Report during the period to Ma 7, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied.concerning the examinotions and corrective measures described in this Owners Report.furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

In actor's Signatwe Dat~++19+/Commissions Factory Mutual System 0230 N I National Board, Stote.Province.ond fndorsements Pagy 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requtred by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Nome P.O.BOX 029100, AjIAAji, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address June 27, 1991 Sheet 1 of Unit PWO: 9061 CNRtt 91-3-016 Repo'r organization P.O.No., Job No.etc.Type Code Symbol Stamp N/A Authorizotion No.N/A Expiration Date N/A 4.Identification of System Auxiliary Feedwater System Quality Group C 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping AFW Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-CSTH-143 Year Built EST.1970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or Na)7 Description of'Work During ISI examination of SuPPort MKo 3-CSTH-143, the toP clamP nut did not have full thread engagement.

Tightened nut to achieve full thread engagement.

'8.Tests Conducted:

Hydrostatic Pneumatic Nominal'Operating Pressure Other Pressure p st Test Temp Degree'e F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-016-3

.FORM NIS-2 (Back)Page 2 of 2 hfechanical connection.

No welding performed.

9.Remarks Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct.and this to the rules of the ASME Code,Section XI.N/A Type Code Symbol Stamp repair repair or replocement conforms Certificate of Authorizatio No.N/A Expiration Date N/A Signed Owner or Owner's Designee.Title Date 4/dcP, 19~+CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Arkwri ht hfutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner's Report during the period to June 12, 1991~and stote that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the'inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any monner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dat Ins or's Signature/~s~P Commissions Fact,ory Mutual System 6230 N I National Board, State.Province.and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI t FLORIDA POWER 8s LIGHT~Name P.O.BOX 029100.MIAMI, FL 33102 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address June 28, 1991 Sheet 1 of Unit PWO: 9056 NCRss N-91-0155 CNRis 91-3-006 Repar Organization P.O.No..Job No.etc.3.Work Performed by P.O.BOX 3088.FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Safety Injection System Quality Group 5.(a)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Gate Valve Name of Manufacturer Anchor Darling Manufacturer Serial No.N/A National Board No.N/A'ther Identification MOV-3-864 B Year Built EST.1970 Repaired.Replaced.or Replacement Repaired ASM'ode Stamped (Yes or No)No Repaired, by flapping, one (1)linear indication adjacent to FWss 6, on t,he 7.Description of Work machined taper of valve MOV-3-864B.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's p N/A NOTE: Supplemental sheets in form of lists.sketches, or drawings may be used, provided (1)size is 8 1/2 in.t X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-017-3 FORM NIS-2 (Back)Page 2 of 2 No welding performed.

9.Remarks Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code.Section XI.repair repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorizatio Signed N/A N/A Expiration Date Date~4~~19~~Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner's Report during the period to A riL5, 1991~and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty.expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dat 19 Insp or's Signature l Commissions Factory Mutual System 8230 N I Notional Board, State, Province.and Bndorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS's Required by the Provisions of the ASME Code Section XI 2.Plant FLORIDA POWER&LIGHT Name P.O.BOX 029100, hfIAhfI, FL 33102 Address TURKEY POINT Name P.O.BOX 3000, FLORIDA CITY.FL 33034 Ad ess July 13.1991 Sheet 1 of Unit PWO: 9061 CNRts 91-3-011 Repa'r Organization P.O.No..Job No.etc.Work Pe formed by FLORIDA POWER&LIGHT Name P.O.BOX 3080.FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Auxiliary Feedwater System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.s Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Piping AFW N/A N/A N/A 00117-H-320-19 EST.1970 Replacement No 7 Description of'Work During ISI examination of SuPPort hfK+00 1 17-H-320-19, the toP locking ring on the load pin was found to be missing.Replaced locking ring with new cotter pin.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other ,r Pressure psi Test Temp Degree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-010-3

.FORM NIS-2 (Back)Page 2 of 2 hiechanical connection, No welding performed.

9.Remarks Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct.and this P conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authoriza'on N N/A Expiration Date N/A Signed ner or Owner's Designs.Title Date la.i9~Inspectors and the State, or Province of Dade County, Florida Arlcwri ht Mutual Insurance Com an of Norwood.hiA.have inspected the components described in this Owner s Repo t during the period"'"'nnd employed by to June 25.1991 , and state that to the best of my knowledge and belief, CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner foi any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dat In ector's Signature~ig F~Commissions Factory hfutual System 0230 N I National Board, State, Province.and E'ndorsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Na ale P.O, BOX 029100, MIAMI.FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address July 15, 1991 Sheet 1 of Unit PWO: 2311 NCRts N-91-0504 CNRts 91-3-026 Repo'r Crganization p.a.No..Job No.etc.Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Component Cooling Water Quality Group 5.(a)Applicable Construction Code ANSI B31.1 1g 55 Edition, N/A Addendo, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identificotion year Repaired, Built eP or Replacement ASME Code Stamped (Yes or No)Piping CCW N/A N/A N/A 3-ACH-4 EST.1970 Replaced No 7 Description of'Work ReplaceŽissing U'Bolt and re-aligned the pipe saddle to it,'s original design requirements.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure pst Test Temp Degree's F N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1i2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-019-3

.FORM HIS-2 (Back)Page 2 of 2 Mechanical connection, No welding performed.

9.Remarks Applicabfe Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct.and this>conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed or Owner's Designee, Tit e Date~>9~%CERTIFICATE OF INSERVICE INSPECTION I.the undersigned, holding a valid commission issued by the National Board of Boiler and Pressuro Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood.hfA.have inspected the components described In this Owner s Report during the period"P to June 28, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind cr:sing from or connected with the inspection.

Dat nspector's Signature 19'ommissions Factory hfutual System 8230 N I National Board.State.Province, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, hiIAhiI, FL 33102 Address TURKEY POINT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address July 17.1991 Sheet 1 of 1 Unit PWO: 9056 NCR¹N-91-0236 CNR¹91-3-020 Roper organization P.O.No., Job No.eta.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A 4.Identification of System Safety Injection System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Coinponents Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.'ther Identification B.,lt Replaced, or Replacement ASM'ode Stomped (Yes or No)Piping SIS Piping SIS N/A N/A N/A N/A N/A 0000-H-010-01 N/A 0051-H-605-03 EST.1970 EST.1970 Repaired Repaired No No 7 Description of Work Restored pipe Supports 0080-H-0 10-0 1 and 005 1-H-605-03 to it's original design requirements.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure p st Test Temp Degree's F N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-020-3 FORM NIS-2 (Back)Page 2 of 2 hiechanical connection.

No welding performed.

9.Remarks Applicable Manufacturer's Dote Reports to be attached r CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct.and this to the rules of the ASME Code,Section XI.repair repa'r or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorizati No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Aricwri ht hfutual Insurance Com an of Norwood.hiA.hove inspected the components described in this Own~s Report during the period"'"'y'o July 8.1991~and state that to the best of my knowledge and belief, the Owner has performed examinotions and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

lnspe tor's Signature Commissions Factory Mutual System 8230 N I National Board, State, Province, and Endorsements Oa Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, hiIAhil, FL 33102 Dote July 19, 1990 Sheet 1 of 1 Address TURKEY POINT Name P.O.BOX 3066, FLORIDA CITY, FL 33034 Address Unit PWO: 1609 PC/M: 69-162 P/S: 90-246 Raper Organization P.a.No..Job No.etc.3.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3066.FLORIDA CITY.FL 33034 Address 4.Identification of System Safet In'ection S Type Code Symbol Stamp Authorization No.N/A Expiration Dote N/A stem 5.(a)Applicable Construction Code B31 1 19 55 Edition,'/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced ond Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built ASM'ePaired, Code Replaced, Stamped or Replacement (Yes or Check Valve Anchor Darling N/A N/A 3-875A Est.1970 Repl acement No 7 Description of'Irork Replaced bonnet studs and nuts at tag location 3-675A.8.Tests Conducted:

Hydrostatic Pneumotic Nominal Operating Pressure Other Pressure gggg psi Test Temp geg tgegree's F'CS Overpressure Test, per OP 1004.1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X llin., (2)information in items 1 through 6 on this report is included on eoch sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

~FORM NIS-2 (BCICk)Poge 2 of 2 9 Remarks Quality Group"A" Applicable Manu(acturer's Data Reports to be attached Mechanical connection, No welding performed CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this P conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Ger tifi of Authoriz'on o.Signed N/A P4/P'-QPT Expiration Date Date>>/.Tgfd ner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION

, I, the undersigned, holding o valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht hfutual Insurance Com an Dade Count, Florida of and employed by Norwood, hfA.have inspected the components described in this Owner's Report during the period to July 2, 1990 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

lnsp or's Signature Dot Z 5 19'Commissions Factory hfutual System 4956 N I National Board.State, Province.and Endarsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER Ik LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address Work Performed by FLORIDA POWER Ik LIGHT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address July 24.1991 Sheet 1 of Unit 3 PWO: 9056 CNRss 91-3-001 Raper Crganization P.O.No..Job No.etc.Type Code Symbol Stamp N/A Authorizotion No.N/A Expiration Dote N/A 4.Identification of System Residual Heat Removal Quality Group 6.(a)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping RHR Name of Manufacturer N/A Manufacturer Serial No.N/A Notional Board No.N/A Other Identification 3-RCH-10 Year Built EST.1970 Repaired, Replaced, or Replacement Replacement ASME Code Stomped (Ycs or No)No Descf iption of Work RePlaced bent U'Bolt and installed new nuts on SuPPort MKs 3-RCH-10.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degrer/s r N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-022-3

,FORM NIS-2 (Back)Page 2 i<'2 hfechanical connection.

No welding performed.

9.Remarks Applicable Monufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements'made in the report are correct and this P e conforms repai'r replacement to the rules of the ASME Code.Section XI.Type Code Symbol Stamp N/A Certificate of Authori ati n No.N/A Expiration Date N/A Signed Owner or Owner's Designee.Title Date cP), 19~9 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and efnployed by Arkwri ht Mutual Insurance Com an of Norwood.hfA.hove inspected the components described in this Owner's Report during the period to June 5, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Ins ctor's Signature Commissions Factory hfutual System 0230 N I Nationol Board, State.Province, and Endorsements Dat Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100.hfIAhfi.FL 33102 July 24, 1991 Sheet 1 of Address TURKEY POINT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address Unit PWO: 2309 NCR¹N-91-0677 Repar Crgattizatioo P.a.No., Job No.etc.Type Code Symbol Stamp Authorization No.Expiration Date Address 4.Identification of System Component Cooling Water Work Performed by FLORIDA POWER 8c LIGHT Nome P.O.BOX 3000, FLORIDA CITY, FL 33034 N/A N/A N/A Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addendo, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addendo 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping CCW Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-ACH-7 Year Built EST.1970 Repaired, Replaced, or Replacement Repl acement ASME Code Stamped (Yes or No)No 7 De cr t jan af'Work Restored PiPe SuPP ort.hiK¹3-ACH-7 to it's original design requirements by welding in a shim plate to obtain proper clearances.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degrer/s r N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings ray be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet.and (3)each sheet is numbered and the number of sheets is recorded ot the top of this form.91-021-3

.FORM NIS-2 (Back)Page 2 of 2 All welding was performed inaccordance with the FPL Weld Control Manual and site 9.Remarks Applicoble Manufacturer's Data Reports to be attached procedures.

CERTIFICATE OF COMP UANCE We certify that the statements made in the report are correct and this P conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Author'zatio No.N/A Expiration Date Signe Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid cofnmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Arlcwri ht Mutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner's Report during the period to July 8.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

ln ctor's Signature Commissions Factory Mutual System 8230 N I National Board, State, Province.and Endorsefnents Dat

~~~QI O]$~l~1OQJa~gy~~~~o~~~I~~~~~~~~~II~~~~I~$~\~'~~'ll>~i'jlk A~L E~~~~~~~-~.'~a~a Il R~F~~c~~~~~~a~~~~~5~~~'~~~~'~~~~'~0~~~~~~~\~'~~~~~~I~~~~~~~~~~~~~4~~~~~~~~~~~~~~~~~~P 0 RI.l%~L~L~~~~~~~~II~'I'~~~~~~~~~~~~~.~~~~~~~'~~~~~~~~~~~~~~~~~~~~'~~~~~~'~

FORM NIS-2 (Back)Pogo 2 of 2 g Remari Examinations performed by FPL Construction Quality Control personnel.

Applicable Monvtocturor'o Data Reports to bo ttaocherI w 1 in was erformed in accordance with the FP&L Weld Control Manua'1 and Site Procedures.

CERllRCATE OF COMPLIANCE Wo certify that the statements made in the report are correct and this conforms to the rules of tho ASME Code,Section XI.repa r or rep acemen Type Codo Symbol Stamp N/A Certificate of Authorizatio No,/c" Slg nod N A Expiration Date r-z.Owner or Owner's Designee, Title CERIIRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commlsslon issued by the NOVonal Board of Boiler and Pressure Vessel inspectors and tho State or Province of Dode ond employed by have I ht Mutual insurance Com af Norwood MA.cted tho components doscribod In this Owner's Report during the perio/FF/~re%and state that to the best of my knowiedgo and belief, the Owno as performed examinations and taken corroctive measures described in this Owner's Report in accordance with the roqulremonts of ASME Code,Section XI, By signing this certificate neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective moosures described in this Owners Report.Futhermore, nelthor the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection, In e Slgnahro D~.S ir~Foctory Mutual System Commissions N I Hosanol Boar%, State, rrevince, ond Enricreernerrio

~Qo 0 0~s~s s gy y~~~~~~~~~~~'I~~~~~~'~~'I'~Il ,~II~~~-~-~~I dI>~stile 8~a a~~~~~~~~~~I~a~I O~L l~I[j II~~'~~I~~~~~~~1~I~e t e~~~~~~~~I~~~~~~~~~~~~~~~~~~~,~~~'I~~~~~~~~~~~~~~~~~~~t~~~~~~~~~I~~~RI..m5~t~t L~R L~a~~~~~~~I II~~~~~~t~~~e~~.o e~~~~~'~t~~~~~~~~~~~~~~~~~~~~~~~~~~~4'~

FORM Nls-2 (Back)Page 2 of 2 Examinations porformad by FPL Construction Quality Control personnel.

Ppplkobte Mcnufoctarer's Data Reports ta be attached All weldin was erformed in accordance with the FP&L Weld Con r Site Procedures.

CERTIRCATE OF COMPUANCE Wo corUfy that tho statements mado in tho report are corroct and this conforms REPLACEMENT to tho rutos of tha ASME Code, Section Xi.repair or rep acemen Type Code Symbol Stomp N/A Certificate of Authorization No.'N A Expiration Dato Signed S ere Owner or Owner's Designee, Title.1911 CERIIFlCATE OF INSERVICE INSPECIION I, the undersigned, holding a valid commission Issued by tho National Board of Boiler and Prassuro Vessel Inspectors and the State or Province of Dade Cou Rorlda and employed by w ht Mutual insurance Com of Norwood MA.havo inspected tha components doscrtbad In this Owner's Report during the period/and state that to the best of my knowlodgo and bollaf, the Owner hos performed examinotions and taken corrective measures doscrlbod in this Ownor's Report In accordance with the requirements of ASME Code,Section XI.By signing this certilicate neither tho Inspector nor his employor makes any warranty, expressed or Implied, concerning tho examinations and corrective meosuras described in this Owners Report.Futhermore, neither tho Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

19~9 Commissions Factoly Mutual System 8230 N I Nattcnct Board, State, Province, ond Endoreemente FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Nome P.O.BOX 029100, MIAMI, FL 33102 Date July 27, 1990 Sheet 1 of 1 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Unit PWO: 1608 PC/M: 89-182 P/S: 90-085 Repo'r Crgonizotion p.a.No., Jotp No.etc.Work Performed by FLORIDA POWER 8c LIGHT Nome P.O.BOX 3088.FLORIDA CITY.FL 33034 Address 4.Identification of System Residual Heat Type Code Symbol Stomp Authorization No.N/A Expirotion Date N/A Removal 5.(a)Applicable Construction Code B31 1 19 55 Edition,'/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Reploced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or Check Valve Anchor Darling N/A N/A 3-876B Est.1970 Replacement, No 7 Description of'Worlt Replaced bonnet studs and nuts at tag location 3-876B.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp ggg Degree's F'CS Overpressure Test, per OP 1004.1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

FORM NIS-2 (Back)Page 2 of 2 g.Remarks Quality Group"A" Applicable Monufoctu'er's Dote Reports to be attached Mechanical connection, No welding performed CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this P conforms repar or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Auth izati No N/A Expiration Date N/A.Signed Owner or Owner's Designee.Title Date Z r,19~d CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to July 26, 1990 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dat l ector's Signature 19M>Commissions Factory hiutual System 4956 N I Notional Boord, State.Province, ond fndcrsements e

Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Nome P.O.BOX 029100, hiIAhil, FL 33102 Address TURKEY POINT Nome P.O.BOX 3088.FLORIDA CITY, FL 33034 Address July 29.1991 Sheet 1 of Unit PWO: 2324 NCRts N-91-0433 CNRts 91-3-056 Repo'r Crgonizotion P.O.No..Job No.etc.'Woi k Performed by FLORIDA POWER&LIGHT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Reactor Coolant System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping RCS Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification RCP-SPB-L2 Year Built EST.1970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or No)No Repaired, by grinding, one (1)linear indication, on the RCP"B" support lug.7.Description of Work 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure ps l Test Temp Degree's F N/tt NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 1lin., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-025-3

~FORM NlS-2 (BCI Ck)Page 2 of 2 9 Remarks No welding performed Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct.and this to the rules of the ASME Code,Section XI.repair repar or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorizati No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title pate 9/~l, 19~?CERTIFICATE OF INSERVICE INSPECTION I~the undersigned.

holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arlcwri ht Mutual Insurance Com an Dade County, Florida of and employed by Norwood, hfA.have inspected the components described in this Owner's Report during the period to July 22.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

specter's Signature 19M Commissions Factory hiutual System 8230 N I Notional Board, State.Province, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS's Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, MIAMI.FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address August 1, 1991 Date Sheet 1 of Unit PWO: 9056 NCR¹N-91-0237 CNR¹91-3-032 Repar Crganizatioo P.O.No..Job No.etc.3 Work Performed by LOR Name P.O.BOX 3088.FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Component Cooling Water Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping CCW Name of Manufacturer N/A Manufacture Serial No.N/A Notional Board No.'/A Other Identification 3-SMH-15 Year Built EST.1970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or No)No 7 Description of'Work During ISI examination of SuPPort MK¹3-SMH-15, clamP bolting was found to be loose.Tightened clamp bolting.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp Degree's F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-026-3

.FORM NIS-2 (Back)Page 2 of 2 Mechanical connection, No welding performed.

9.Remorks Applicable Monufactwer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair repair or repiacement conforms Type Code Symbol Stomp N/A Certificate of Authorizatio o.N/A Expiration Dote N/A Signed Owner or Owner's Designee, Title Dat.CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arlcwri ht Mutual Insurance Com an of Norwood.hfA, have inspected the components described in this Owner's Report during the period to July 24 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspector's Signature A)g~Z Commissions Factory Mutual System 8230 N I Notional Board, State.Province.ond Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI ,-.,2.Plant FLORIDA POWER&LIGHT Name P.O.BOX 029100, hfIAhfi, FL 33102 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 August 5.1991 Sheet 1 of Unit PWO;2309 NCR¹N-91-0239 CNR¹91-3-036 Address Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A Repa'r Craanizotion P.O.No., Jotp No.etc.4.Identification of System Safety Injection System Quality Group 5.(a)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Piping SIS N/A N/A N/A 8080-H-010-14 EST.1970 Replacement No Description of Work During ISI examination of SuPPort hiK¹8080-H-010-14, the sPring can was found to be bent.Replaced damaged can with new Bergen Paterson can, hfodel¹VSIA-2.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp Degree's r tt/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1//2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-027-3 FORM NIS-2 (Back)hfechanical connection, No welding performed.

9.Remarks Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this P conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authori atio No.N/A Expiration Date N/A Signed Owner or Owner's Designee.Title Date~19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arlcwri ht hfutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner s Repo t during the period"'u"yo July 24 1991.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspec'tor s Signature Commissions Factory hfutual System 0230 N I National Board, State, Province.and Endcrsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3068, FLORIDA CITY, FL 33034 Address August 7, 1991 Sheet 1 of Unit PWO: 2366 NCR¹N-91-0677 Repar Prgontsation P.p.No..Job No.etc.Work Perfprmed by FLORIDA POWER&LIGHT Name P.O.BOX 3066~FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date iV/A N/A 4.Identification of System Component Cooling Water Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition,.N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer

'Manufacturer Serial No.Natiorial 0th identification No.Repaired, Built or Replacement ASM'ode Stamped (Yes or No)Piping CCW N/A N/A N/A 3-ACH-3 EST.1970 Replacement No 7 D as cr j tip n pf'Wprk Restored suPP ort MK¹3-ACH-3 to it,'s original design requirements by instal ling a new U-bolt and tightening all loose nuts.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's F N/rt t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used.provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-026-3

.FORM NIS-2 (Back)Page 2 of 2 hfechanical connection, No welding performed.

Applicable Monufoctorer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct.and this P e conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate thorizati No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owner's Report during the period to Jul 31, 1991 , and state that to the best of my knowledge and belief.the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owners Report.furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

In ctor'.s Signotvre Commissions Factory hfutual System 0230 N I National Board, State.Province.and Endorsernents CORRECTED COPY 11-07-91 Page 1 of 2 FORM HIS-2 ONNER'S REPORT FOR REPAIRS OR REPtACEMENTS As Required by tho Provisions of the ASME Code Soction XI 1 0FLORIDA POWER 4 LIGHT P.O.BOX 029100 MIAMI FL 33152 pate Au ust 8 1991 Ghent of p(ont TURKEY POINT P.O.BOX 3088 FLORIDA CflY FL 33034 3.Work Performed by P O.OX 21 ORI 4.Identification of System Unit 3 4 Cffo:300316,PS 91-79, Cdt'N:-3 2 Ciio:300318 PS91-705,NCR-tf-01-0659 Rdpdtt Ot OQfhIEatbdt P.O.NoJob No., etc.Tl I Authorization No A CIIY 33034 Exp'ration Pate AUXILIARY FEEDWATER Quality Group C (b)Applicoblo Edition of Section XI Utilized for Repo'rs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repa'red or Replaced and Replocement Components Home of Component Home of Manufacturer Manufoctu>>

Serial Ho.IIatlonal Bocrd Ho.Othe IdonNcatJon Yeda Built Ropabed, Replaced, or Replacement PIPING AFW NA PIPING AFLI tfA PIPING AFW NA PIPIffG AFW NA PIPItfG AFW NA tfA NA tlA fiA NA NA NA 80117-H-321-03 3-AFH-83 80117-H-320-09 80117-H 320-10 80117-H-320-21 EST.1970 EST.1970 EST.1970 EST.1970 REPLACED REPAIRED REPAIRED REPAIRED REPAIRED NO NO NO NO NO 7.Descript>>af viork Su ort 80117-H-321-03 modi f i ed in accordance wi th NEP 90-362 3-AFH-83 adjusted threaded Rod, Supports 80117-H-09,10,21 pipe clamp and strut adjusted to achieve proper alignment 8.tests Conducted:

Hydrostatic Pneumatic Nominal Operotinf Pressur~Olher Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered ond the number of sheets is recorded ot the top of this form.91-029-3 FORM NIS-2 (Back)Pago 2 of 2 9 Remarks Examinations Performed by FPL Construction Quality Control Personnel.

Ppplloobto uohvroctureA Doto Itepcxte to bo ettoche4 ALL IIELDIHG PERFORt1ED IN ACCOROAflCE llITH FP 8 L)i'ELD COtlTROL NIIUEL AND SITE PROCEDURtS.

CERTIFICATE OF COMPUANCE We certify that tho statements mode ln ths report aro correct and this REPAIR gi REl LACE~El"Tconforms to tho rules of tho ASME Code,Section XI.repair or repocemen Type Code Symbal Stomp N/A Certific to of Authorizatio 0>>N A Expiration Date Signa Ownor ar Ownor's Designee, Title Date , 199/CERTIFlCATE OF INSERVICE INSPEC1ION I, the undersigned, holding a volid commission Issued by the Notional Board of Boiler and Pressure Vessel lnspoctors and tho State or Province of Dodo Coun Fiorida and omployed by Arkwrl ht Mutual Insurance Corn n of Norwood MA have inspected tho components described ln this Owner's Report during the period to rfg r and state that to tho best of knowledge and belief, the Owner has performed exominations ond takon corrective measures described in this Owner's Roport in occordance with the requirements of ASME Code, Section N.By signing this certificate neither tho Inspector nor his employer makes ony wonanty, expressed or lrnplied, concerning the oxaminatlons and corrective measures described In this Owners Report.Futhermore, neither the Inspector nor his employer shall bo liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

h~Slghotaha Date~19~~Factory Mutual System Commissions N I Natbhot Board.Stato, Pro>>theo, oh@Endoraemohte Page 1 of 2 FORM NIS-2 ONNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl Owner FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 Date August 8, 1991 Gheat of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Unit Repak Orttonhotbn pi).No Job No..etc.3.Work Performed by 0 31 OIDAC 4.Identification of System Type Code Symbol Stamp Authorization No Expiration Date Quality Group (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components RepaI'ed or Reploced and Replacement Components Nome of Cofnponont Name of Manufacturer Llanufacbra'erial No.National o~d Identlflc ation Yecr Built Repaired, Replaced, or Replacement eedvater P.t Auxiliary F N A N A N A N A EST.1 70 Re lacement No f W k Removed and abandoned Support No.3-AFH-4 7, and mode fled Support 7.Description of Work No.80117-H-321-03.

8.Tests Conducted:

Hydrostatic

'Pneumatic Nominai Operating Pressure Other Nltt Pressure psi Test Temp.Degree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in..(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numb+ed and the number of sheets is recorded ot the top of this form.

FORM NIS-2 (Back)Page 2 of 2 9 Remi)rks ExaminaUons performed by FPL Construction Quality Control personnel.

Appticabia Manuf~Data Repotts to ba attochad All welding was performed in accordance with the FP&L Weld Control Manual and Site Procedures.

CERTIFlCATE OF COMPUANCE We certify that the statements made fn the report are correct and this conforms to tho rules of the ASME Code, SecUon XI.ropa r or repacemen Type Codo Symbol Stamp N/A CerUffcate of AuthorizaUon No.N A Expiration Date N A Signed Sir<Owner or Owner's Designeo, Title Date F-I Z CERTIRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the NaUonal Board of Bohr and Pressure Vessel inspectors and the State or Province of Dade Coun Rorida and omployed by Arkwri ht Mutual insurance Com of Norwood MA.havo lnspocted the components described ln this Ownor's Report during the porfod/to and state that to the best of m knowfedge and beffef.the wner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requ'lrements of ASME Code, SecUon XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and correcUve measures described ln this Owners Report.Futhermore.

neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

sp4c48 a$9natvfa>9 P~Commissions Factory Mutual System 8230 Hatbnat Board, Rate, Pnwfnce, and Endaraamenta Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL, 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address August 12, 1991 Sheet 1 of Unit 3 PWO: 2413, 2107 NCRts 88-0076 Repoi'rganizotiotg P.o.No..Job No.etc.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Containment.

Spray System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition,-N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping CSS Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification SR-164 Year Built EST.1970 Repaired, Replaced, or Replacement Replacement ASME Code Stamped (Yes or Na)No 7 De scrip tip n pf Wprk Repl aced threaded rod to obtain proper thread engagement and reset spring c an to it's original design requirements on Support MKss SR-164.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure p st Test Temp Degree's F N/A t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-030-3

, FORM NIS-2 (BCICk)Page 2 of 2 hfechanical connection.

No welding performed.

9.Remarks Applicoble Monufactuer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this>conforms re lacement, repair or replacement to the rules of the ASME Code, Section'XI.

Type Code Symbol Stamp N/A Certificate of Authoriza'o.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood, hfA.hove inspected the components described in this Owner's Report during the period to Jul 8, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore.

neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

nspectof s Signotore.Z~F Commissions Factory hfutual System 8230 N I National Board.State.Province.and Endcrsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3000.FLORIDA CITY, FL 33034 Adds'ess Work Performed by FLORIDA POWER Ik LIGHT Name P.O.BOX 3000.FLORIDA CITY, FL 33034 Address August 14, 1991 Sheet 1 of Unit 3 PWO: 2202 NCRst N-91-0170 Repa'g Organization P.O.No..Job No.etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Oate N/A 4.Identification of System Safety Injection System (Accumulator)

Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A.Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Globe Valve Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-001F Year Built EST.1970 Repaired, Replaced, or Replacement Replaced ASME Code Stamped (Yes or No)No Globe Valve Rockwell N/A N/A 3-001F 1990 Replacement No 7.Description of Work Re laced valve at ta location 3-001F due to excessive seat leaka e.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure g"g psi Test Temp gg Degree's F, t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-031-3 FORM NIS-2 (BCICk)Page 2'of 2 All welding was performed inaccordance with the FPL Weld Control hfanual and site 9.Remorks Applicable Manufactwer's Data Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are, correct and this P conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization o.N/A Expiration Date N/A Signed Owner or Owner's Oesi9nee, Title Date F , 19~9'ERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Aricwri ht mutual Insurance Com an of Norwood.hfA.hove inspected the components described in this Owner's Report during the period to June 26.1991.and state that to the best of my knowledge and belief.the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

nspector s Si9notwe 19~+Commissions Factory mutual System 8230 N I National Board, State, Province.ond Cndorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, hfIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address August 14, 1991 Sheet 1 of 1 Unit PWO: 2403 Repo'r organization P.O.No..Job No.etc.3 Work Performed by FLORIDA POWER 8a LIGHT Nome P.O.BOX 3000, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Residual Heat Removal Quality Group 5.(a)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer

, Manufacturer Serial No.Notional Board No.Other Identification lear Built Repaired, Replaced, or Replacement ASM'ode Stamped (Yes or No)hfechanical Shock Arrestor hfechanical Shock Arrestor Pacific Scientific Pacific Scientific 12396 16237 N/A N/A 3-1027 3-1027 1902 Replaced 1983 Replacement No No 7 Description of'Work Replaced Mechanical Shock Arrestor at tag location 3-1 02 7.The spherical bearing itras found to be frozen.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degrer/s F N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 1lin., (2)information in items 1 tlirough 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-032-3 FORM HIS-2 (Back)Page 2 of 2 9 Remarks Mechanical connection,No welding performed Applicable Manufacturer's Outa Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this P conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorizati n No N/A Expiration Date N/A Signed ner or Owner's Designee, litle Date F/d.19~CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Boord of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Aricwri ht Mutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner's Report during the period to July 22.1991.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

nspector's Signature D~19&~Commissions Factory Mutual System 6230 N I National Board, State.Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100.MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address August 30, 1991 Sheet 1 of 1 Unit PWO: 9057 NCR¹N-91-0766 Repar organization p.a.No..Job No.etc.Performed by FLORIDA PO ER 8c LIGHT Nome P.O.BOX 3088.FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Chemical and Volume Control Quality Group A 5.(a)Applicable Construction Code ANSI B31.1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping CVCS Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification H-4 Year Built EST.1970 Repaired, Replaced, or Replacement Repl acement ASM'ode Stamped (Yes or No)No 7 DW rk Restored Support MK¹H-4 to it's original design by installing missing U'olt and installing a shim to facilitate installation.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure ps l Test Temp Degree's F N/A (~NOTE: Supplemental sheets in form of lists.sketches.or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-026-4 FOR M NIS-2 (Ba ck)Page 2 of 2.All welding was performed inaccordance with the FPL Meld Control Manual and site 9.Remarks Applicable Manufacturer's Data Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are corrert and this P conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificote of Author ation o.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood, hfA.have inspected the components described in this Owner's Report during the period to Au ust 26.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code.Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore.

neither the inspector nor his employer shall be liable in any, manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Da In pector's Signature 9M'ommissions Factory hfutual System 8230 N I Notional Board.State, Province, and Endcrsernents Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requiqed by the Provisions of the ASME Code Section XI 2.Plant FLORIDA POWER&LIGIIT Name P.O.BOX 029100, hfIAhII, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address September 12, 1991 Date Sheet 1 of Unit PWO: 2464 NCRss N-91-0800 Repar Crganizatian P.a.Na..Jab Na.etc.tlbtork Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Auxiliary Feeds'ater Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Cotnponent Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Repaired, B'It Replaced or Replacement ASM'ode Stamped (Yes or No)Piping AFW N/A N/A N/A 80117-R-332-04 EST.1970 Replacement, No 7 Description of tlbfork RePl aced sunray strut as sy~.on SuPP ort, MKo 80 1 1 7-R-3 32-04.The existing strut assemble was found to be bent.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's F N/rt NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)informotion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-033-3 FORM HIS-2 (BCICk)Page 2 of" 2 All welding was performed inaccordance with the FPL Weld Control Manual and site 9.Remarks Applicable Manufacturer's Data Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this p conforms re lacement repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authoriz on N/A Expiration Date N/A Signed Owner or Owner's Desi9nee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Arkwri ht Mutual Insurance Com a of Norwood.MA.hove inspected the components described in this Owner's Report during the period to Se tember 7, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ari'from or connected with the inspection.

Dat ln ctor s SI9nature 19 i Commissions Factory Mutual System 6230 N I National Board.State.Province, ond Endorsements

~~QO~0 g 0~0 0 l l~0 I gl~~~~~~~~~~~I'~~~~I'l~~~~I~~~I~I~'~-'.~~~>lP~I'llL~~~~~~~~~~~~'g Q I~~~~~~~I~~~~~I'o~~~~~~~'~~~~~~~~~~~'~~~~~~~~~~~:~~~~I~~I'~'~~~~~~~~t~~~~'~~~~~~~~~~~~~~~~~~e~~~L L L L L i~~'~~-~~~~~~~~~~~~~~~~~~~~~'~-~~~~~~~I.~~~'~~~~~~j~~~~~~~~~I~~I~~~~~~'~~~~'~~'~~~~

FORM Nls-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

Appfkobte Llonufocturer'e Data Iteporte ta be attached All welding performed in accordance with the FPGL iield Control hlanual and site procedures.

CERTIRCATE OF COMPUANCE We certify that the stotements made in the report are correct and this to the rules of the ASME Code, SecUon XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date N A Signed Owner or OwneCs Designee, TrUe , 191(CERTIFlCATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission issued by the HaUonal Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Rorlda and employed by Arkwrl ht Mutual insurance Com of Norwood MA.have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinotions and token correcbve measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shail be liable in any manner for any personal injury or property domage or a loss of any kind arising from or connected with this inspection.

nepector'e Signature i9~~Factory Mutual System Commissions N I Notional Sard.State, Prcwtnce, ond Endoreernente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER 4 LIGHT P.O.BOX 029100 MIAMI FL 33152 2 Plat TURKEY POINT P.O.BOX 3088 FLORIDA CIIY Fl 33034 3.Work Performed by Date 9-18"91 Sheet of 1 1 Unit CNO: 500438 NCR-C-0741-87 ROPE arttotttmtbn P.O.No., Job No., etc.Type Code Symbol Stamp Authorization No Expiration Date Safety Injection 4.Identification of System ANSI 5.(a)Applicable Construction Cod (b)Applicable Edition of Section XI Utilized for (SIS)Quality Group Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component High Head S.I.System Name of Mtxtufacturer N/A Manufacturer Serial No.N/A Naoonel Bocrd'o.N/A Other IdenNIc ation SR-242 Yecr Built EST.Repaired, Replaced, or Replacement Replacement ASME Code Stamped (Yes or No No High Head S.I.System High Head S.I.System N/A N/A N/A N/A N/A N/A 7744-H-302-11 7744-H-302-12 EST.1970 Replacement EST.1970 Replacement No No 7.Description of Work Re laced su rt SR-242.Su oorts 7744-H-302-11 and 7744-H-302-12 Replaced U-bolt.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operoting Pressure Other Pj Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lish, sketches, or drawings'ay be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-035-3 FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

Appikoble Manufacturer'e Data Reports to be attached All welding performed in accordance with FPGL Mela Control Manual and Site procedures.

CERTIRCATE OF COMPUANCE We certify that the statements made In the report are correct and this Re>>cement to the rules of the ASME Code,Section XI.repair or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed rdD8~c~.~/>>Owner or Owner'esignee, Title CERllFlCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com n Dade Coun Florida and employed by have inspected the components described in this Owner's Report during the period 6 91 to 8/91 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

n r'e Signature 19~+Factory Mutual System Commissions N I HaVonol Board, State, Province, and Endorsernente Pago 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Owner FLORIDA POWER fk LIGHT P.O.BOX 029100 MIAMI FL 33152 Data 9 23 91 Sheet 1 of 2 Plat TURKEY POINT P.O.BOX 3088 FLORIDA CfIY FL 33034 unit CNO:300165 PCM:90-440 P.S.1-528 RePck Ctygdgtthatke P.O.No., Job No., etc.3.Work Performed by Typo Code Symbol Stamp Authorization No.0, X 21 I A 30 Expiration Date Identlf(cation of System CVCS Boron Addition and Rec c 1 e S stem Quality Group 8 r'I A>>i*'(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome af CompotMtnt Name of Monufo~ctr Manufacbre Serial No.NaUonal Bocrd No.Othe Identlfl cation Yer Built Repaired, Replaced, or Replacement Boric Acid Tanks.NA NA NA NA Est.1970 Replacement No 7.Description of Work'd the edestal boltin and installed ri id swa struts to the 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating pressure Other Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)informotion in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-037"3 FORM Nls-2 (Sack)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.

App5coble Ltonufocturw'e Doto Reports to be ottache4 form d'n accordance with the PPsL Weld Control Manual and site rocedures.

CERTIRCATE OF COMPLIANCE Se certify that the statements made in the report are correct and this conforms to the rules of the ASME Code,Section XI.repair or rep ocemen Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Owner or Owner's Designee, Title Expiration Date t/z g CERTlRCATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwrl ht Mutual Insurance Com n Dade Coun Rorida of and employed by have inspected the components described in this Owner's Report during the period 5/91 to 6 91'nd state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property domage r a loss of any ki arising from or connected with this inspection.

Commissions Factory Mutual System 8230 NaUcnal Scard, State, Provbce, ond Endonomante

~~0 0 oIO~0 f o 0 gS 0~0 0 QO~o~~o~o~~I'~~~~I'~'~~~~~I~~~I I~o~I o I~o~~o'~~~o s o s: l)1~I jig Ijl~a a~~~~~~~~~~~~~~o~~~~~~~I~o~~~~~~~~I'~~~~~~~'~~~~~~~~~~~~~'~~~~~~~~~~'~~~'I~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~o~~~~~~~~~~~~~~~~~~o II~~~II~~~~-II II~-I~~~~~~~~~" ll t~~~y~~~~~~~~~~~~~~~~~~~~~'I~~~'~~~~~~~~~\~~~~~~~~~~'~~~~'~~~~~~~'~~~~~~

~~s~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~~,~~~~II~~~~~~~~~~~~0~~~~~~~~~~~~~~~~I~I..~~';~~~~~~~~~~~~~~~~~~0~~~~~~~~~~~~~~~~~~~~~0~~~~~~~~~~~~~~~~~~~~~~~I~~~I~'~~~~~~~~'~~~'~~'~~~I'~~~~~~~~~~~~~~~m~~~~~~~~~~~~~~'~I~'~~~~~~~~~~~'~~~~~~~~~~~~~~'~~~~~~~~2 uC I I Page 3 of 3 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Ae Required by the Provlelone of the ASME Code Section XI FLORIDA PO Ik UGHT~~Horror P.O.BOX 029100 MIAMI FL 33152 9-23-91 Shaat 2 of 2.Plant TURKEY POINT P.O, BOX 3088 FLORIDA CfIY FL 33034 Unit C40: 300333 PC/M: 90-266 MPIL: 90-273M S" 3.Work Performed by BECHTEL CONSTRUCTION INC.Type Code Symbol Stamp Authorlzatlon No N A P.O.BOX 3218 FMRIDA CITY FL 33034 Epsalm DAe N A k$dteee ldenVflcaVon of$tem CVCS Boron Additon 6 Recyc le ANSI (b)Applicable Edltlon of SecVon XI UVllzed for Repairs or Replacemente 1980, EdIVon, Winter 1981 Addenda 8.IdenVflcaVon of Componante Repaired or Replaced and Replacement Components IIome of Manufochret Repaired, A E RepIoced, or Replocanont (Yw or No)CVCS piping CVCS piping N/A N/A N/A N/A N/A N/A H-14 H-31 est.est.Replacement Replacement No No 7.Deecrlptlon of Work Re laced items 1-6.

Pagtt 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requifed by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAhil, FL 33102 Address TURKEY POINT Nome P.O.BOX 3000, FLORIDA CITY, FL 33034 A dress'Work performed by FLORIDA POWER&LIGHT Name P.O.BOX 3080, FLORIDA CITY, FL 33034 Address September 24, 1991 Sheet 1 of 1 Unit 3 CNR¹91-3-059 N-91-0432 PWO: 2320 PC/hf¹09-102 P/S¹91-460 NCR¹N-91-0517 Raper organization P.O.No., Job No.etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N/A 4.Identification of System Safety Injection System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Check Valve Name of Manufacturer Anchor Darling Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-875B Year Repaired, Bu,lt Replaced, or Replacement ESI'.1970 Replacement ASME Code Stamped (Yes or No)No 7 Description of'Work RePI aced the bonnet,, studs and nuts on valve tag¹3-0 75B, due to corrosion.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other pressure 2200 psi Test Temp ggg Degree's F RCS Overpressure Test.NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-030-3 FORM NIS-2 (Back)Page 2 of 2 hfechanical connection, No welding performed.

9.Remarks Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMP UANCE We certify that the statements made in the report are correct and this P a conforms repair or repiocement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate A horization No.N/A Expiration Dote N/A Signed H M WAX.5u Owner or Owner's Designee.Title Date 2'f ,~91/CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Boord of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arlcwri ht hfutual Insurance Com an of Norwood.hfA.have inspected the components described in this Owne's Repo t during the period AP"'o Se tember 24.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report'in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damag or a loss of any kind arising from or connected with the inspection.

nspector's Signature Commissions Factory hfutual System 8230 N I Nationot Board, State.Province.and Endcrsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required.by the Provisions of the ASME Code Section XI 2.Plant FLORIDA POWER&LIGHT Nome P.O.BOX 029100, hiIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3068, FLORIDA CITY, FL 33034 Address September 25, 1991 Sheet 1 of Unit CNR¹91-3-042, 90-3-005 PWO: 0725 NCR¹N-90-055 N-90-0125 Repa'r Organization P.O.No., Job No.et>>.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3068, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Auxiliary Feedwater Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.Nationol Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No)Piping AFW Piping AFW Piping AFW N/A N/A N/A N/A N/A N/A N/A N/A N/A EST.60117-H-320-08 lg70 EST.80117-H-320-09 lg70 EST.60117-H-320-10 lg70 Replacement Repl acemen t.Replacement No No No 7 Descri tion of Work RePlaced sway strut bearing assy's on SuPPort hiK¹60117-H-320-06, 09, and 10 due to the bearing assy's were found to be frozen.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure p st Test Temp Degree's F N/A NOTE.Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered ond the number of sheets is recorded ot the top of this form.91-039-3 FORM NIS-2 (Back)Page 2 of 2 Mechanical connection, No welding performed.

9.Remarks Applicoble Manufaciur<<r's Oota Reports to be attached CERTIFICATE OF COMPLIANCE We certify thot the statements made in the report are correct and this P conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificote of Authorizatio o N/A Expiration Date Signed Owner or Owner's Designee.Title Dote DC'19~9 CERTIFICATE OF INSERVICE INSPECTION I.the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual insurance Com an of Norwood.MA.hove inspected the components described in this Owner's Report during the period to Se tember 12.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes ony warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in ony manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

I actor's Signature Commissions Factory Mutual System 8230 N I National Board.Stote.Province.ond Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by.tho Provisions of tho ASME Code Section XI 0 FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Dato 9-27"91 Shoot 1 of Unit CWOe 300312 PC/M: 90-354 P/S: 91-750 Repol (?Sotthatkhn P.O.NoJob No., ete.3.Work Performed by P.O X 1 0 ID 3 034 4.IdenNication of System Containment Type Code Symbol Stamp Authorization No Expration Date Quatity Group (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacoment Components Name of Component Containment Containment Spray Containment Name of Manufacturer N/A N/A N/A Manufacturer Serial No, N/A N/A N/A National t Bocrd No.N/A N/A N/A Other IdenNlcation 3-RCSH-101 3-RCSH"102 3-RCSH-103 Year Built est.est.est.1970 Repel ed, Replaced.or Replacement Replacement Replacement Replacement ASME Code Stamped (Yes er No No No No 7 Description of Work Supports 3-RCSH-101, 3-RCSH-102 and 3-RCSH-103 Replaced items 1 thru 8.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other gtc N/A Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-040-3 FORM NIS-2 (Back)Poge 2 of 2 g Rema~s Examinations performed by FPL Construction Quality Control personnel~Applicable Manufacturer'e Octa Reporte to tre attached All welding performed in accordance with FPGl Iield Control Manual and site procedure.

CERTIRCATE OF COMPUANCE Ne certify that the statements mode In the report are correct and this to the rules of the ASME Code, SecUon Xl.repo r or rep ocemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.Expiration Date N A Signs Owner or Owner's Designee, Title Date/~CERTIFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the NOUonal Board of Boiler and Pressure Vessel Inspectors and the Stote or Province of Dade Coun Rorlda and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described In this Owner's Report during the period to 9/91 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordonce with the requirements of ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore.

neither the Inspector nor his employer shall be liable in ony manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Dat nepector'lpnature Factory Mutual System Commissions N I Natkmal Board, State, Prinrince, and Endoieomente r Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 Date 9 30-9 1 Sheet of 1 1 2 Piant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CWO:500550 PC: 0-4 ROPah Organhathn P.O.No., Job No., etc.1-06 3.Work Performed by O.B 3218 0 ID 4.Identification of System 330 Type Code Symbol Stamp Authorization No Expiration Date Quoiity Group.()ui**i iu~(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Nome of Component Nome of Manufacturer Manufacturer Serial No.Notional 8omd No.Other Identification Yecr 8ullt Repah'ed, Replaced.or Replacement ASME Code Stomped (Yes or No RCS-Pressurize S ra Line RCS-Pressurize S ra Line NA NA NA NA Est.PCV-3-455A 1970 Est.PCV-3-455B Re lacement Re lacement No No 7.Description of Work Modified the abandoned s ra valve bodies Abandoned Valves PCV-3-455A

&B),by installation of a welded plate(0.75 inch thick)to provide an a z.tiona arrz.er aga nst ea age.8.Tests Conducted:

Hydrostatic tt Pneumatic Hominoi Operating Pressure Other P Pressure psi Test Temp.Degree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-041-3 FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.

Appscable Ltanufacturei's Data Reports to be attached All welding performed in accordance with the FPL Weld Control Manual,IMA-4000 of ASME Section XI 1980 Edition and site rocedures.

CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed Owner or Owner's Designee, Title Date ,'19+~CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual Insurance Com an of Norwood MA.to 9 91 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

ln s Signature a~~>9'~Commissions Factory Mutual System 8230 Nadonal Board, State, Pro&co, and Endorsements Page 1 of 3 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Coda Section XI 1 0 FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 Date Sheet of 1 2 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CfIY FL 33034 Unit PC/Mc 90-367 CWO: 300404 NCR's: N-91-0556 N-91-0626 N-91-0646.N-91.-0647 Rapalaraarttsauodt p.a.No., Job No., etc.Type Code Symbol Stamp Authorization No Expiration Date 3.Work Perfarmed by 0 I 6.Identification of Components Repaired or Replaced and Replacement Components P.O.BOX 3218 FLORIDA CITY 33034 N A Address 4.Identification of System Com onent Coolin Water Quality Group C ANSI B31.1 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter-1981 Addenda Name of Companont Name of Manufacturctr r Manufactts'ar Serial Na.National Badx d No.Other IdtsntificaUon Yea Built Rapa'rdsd, Replaced, or Rctplacomant ASME Code Stamped (Yes or No CCW Piping CCW Pi in CCW Piping CCW Piping N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A'H-B H-A 3-ACH-129A 3-ACH-141 3-ACH-138 est.1970'st.1970 est.1970 est.1970 est.1970 est., est.Replacement No Replacement No Replacement No Replacement No Replacement No t No m t No 7.Description of Work~---H-12 A 3-A H-141 3-ACH-138 B H4 H5 3-CCH-19, 3-ACH-157, and 3-ACH-130A; modified to restore piping to original analysis condition.

Supports: 3-CCH-59 and 3-ACH-118; installed newly designed supports to rest:ore pzpzng to orzgznal eszgn ana yszs con at>on.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other g Nrtt Degree's F~~~NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this rep'ort is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form, FORM NIS-2 (Back)Page 2 of 3 Examinations performed by FPL Construction Quality Control personnel.

Applicable Manufocturw'e Data Reporte to be attached All welding performed in accordance with the FP 6 L Weld Control Manual and Site Procedures.

CERTIFICATE OF COMPLIANCE We certify thot the statements made in the report are correct and this to the rules of the ASME Code,Section XI.Re lacement repair or rep acemen canforms Type Code Symbol Stamp N/A Certificate of Authorization No.Signed Owner or OwneCs Designee, Title Expiration Date D.~e~r/<CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dode Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Factory Mutual System Commissions N I Na5onal Boarrl, State, Prov(neo, and Enrloreemente Dat Page 3 of 3 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Coda Section XI 0 FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 10-04-91 Sheet 2 of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by I.0 BOX 3218 0 IDA CITY 33034 4.Identification of System Unit NCR S N 0 lc N 91 0 c N N-91-0681 PS'91-811 91-846 Ropo'i Craontrotton P.O.No., Job No., etc.Type Code Symbol Stamp Authorization No Expration Date Quality Group (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Reploced and Replacement Components Name of Componont Nome of Monufacttx'er Monufoctw'or Serial No.National Board No.Other ldontiflcatlon Yocr Built Rap a'rod, Ropla cod, or Replacement ASME Code Stomped tYes or No CCW Pi in CCW Pi in CCW Pioin CCW Piping N/A N A N/A'N/A N A N/A N/A N A N/A N/A N A N/A N/A N A N/A N/A N A H5 3-CCH-59 3-CCH-19 3-ACH-15 3-ACH-118 3-ACH-130 est.1970 est.1970 est.1970 est.1970 est.1970 est.1970 Replacemen No Re lacemen No Re lacemen No Replacemen No Replacemen No Re lacemen No 7.Description of Work see a e 1 of 3)91-042-3 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPtACEMENTS As Requred by, the Provisions of the ASME Code Section XI Owner FLORIDA POWER 8c LIGHT P.O.BOX 029100 MIAMI FL 33152 2 p(ant TURKEY POINT Nome P.O.BOX 3088 FLORIDA CITY FL 33034 Date 10-10 91 Sheet 1 of Unit CWO: 500675 MPIL: 91-486M Repot areontzaUon P.O.No Job No., etc.3.Work Performed by Nome Type Code Symbol Stamp Authorization No Expiration Date 6.Identification of Components Repaired or Replaced and Replacement Components P.O.OX 321 ORIDA C 3 34 4.Identification of System Main Steam Quality Group C ANSI 55.e)s (b)Applicable Edition of Section XI Utilized for Repairs ar Replacements 1980, Edition, Winter 1981 Addenda Nome of Component Main Steam Name of Manufocte er N/A Manufacturer Serial No.N/A National Boa'd'o.N/A Other Identilicatlon SR-144 Year Built es 1970 Repaired, Replaced, or Replacement Replacemen ASME Code Stamped (Yee or No No 7, Description of Work Su rt SR-144 RePlaced items.3 thru 10.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other N/8 Pressure psi Test Temp.egree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examlnotions Performed by FPL Construction Quality Control Personnel.

Pypltcobie Manufacturer's Data Reports to be attoctred All welding was perfortned in accordance with the FPL iield Control Manual and site procedures.

CERTIRCATE OF COMPUANCE We certify that the statements made ln the report are correct and this Rep>>ce>ent conforms to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate f Authorization No.N A Expiration Date N A Signed Owner or Owner's Designee, Title Date/0 ZZ-CERTIRCATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com n Dade Coun Rorida of and employed by have inspected the components described in this Owner's Report during the period B/91 to 9/91 and state that to the best of my knowledge and'belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations ond corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

s Signature cP 19~5 Factory Mutual System Commissions N I National Boord, State, Province, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by tha Provisions of the ASME Coda Section XI 1 Owner FLORIDA POWER 8c LIGHT P.O.BOX 029100 MIAMI FL 33152 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Data 10 10 91 Sheet 1 of Unit PC/tdt: 90-318 CWO: 300146 PS: 91-045 Rdpdtlarpdtnhatbdt P.a.No., Job No.s etc.Type Code Symbol Stamp Authorization No Expiration Dote 3.Work Performed by I 6.Identification of Components Repaired or Replaced ond Replacement Components P.O.BOX 3218 ORIDA CITY 33034 4.Identification of System Intake Coolin Water (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter Quality Group C 1981 Addenda Name of Component ICW Pi in Name of Manufacturer N A N A Manufacturer Serial No.N A N A Notionoi Bood Identification N/A S ol No.5 N A S ol No.6 Yacr Built est.1970 est.1970 Repo'red, Rapiaced, or Replacemttnt Re lacement Replacemen AS ME Code Stampdtd (Yes or No No No 7.Description of Work 10'-8$" long.8.Tests Conducted:

tttdrostattc Pneumatic Nominal Opwating Presswe tc Othw Pressure psig Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.~~~X 11 in., (2)information in items 1 through 6 on this report b included on eoch sheet, and (3)each sheet is numbered and the number of sheets ls recorded at tha top of this form.

FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinotions performed by FPL Construction Quality Control personnel.

Ppphcobie Manufacturer'e Data Reporte to be attocbed All welding performed in accordance with FP a L I'eld Control Manual and site rocedures.

CERTIFICATE Of COMPLIANCE We certify that the stotements mode in the report are correct and this to the rules of the ASME Code,Section XI.Re lacement repair or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed Owner or Owner's Designee, Title D~te/D/J2J r/.19~9 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rarida and employed by Arkwri ht Mutual Insurance Corn n of Norwood MA.have inspected the components described in this Owner's Report during the period 2/91 to ond state that to the best of my knowledge and belief, the Owner hos performed examinations and token corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injuty or property damoge or a loss of any kind arising from or connected with this inspection.

Ine~Signature Dot A 19~Commissions Factory Mutual System 8230 N I tiotknoI Board.State, Prrnrince, ond fixhreerrrerrte Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS.

As Roquired by the Provisions of tho ASME Codo Section XI FLORIDA POWER 8t LIGHT P.O.BOX 029100 MIAMI FL 33152 Date 10 10 91 Sheet.of 1.1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit PC ft: 90" 393 CWO: 300317 NCR~N-1-6 7 PS~1-890 Roped Cgaonheuon P.a.No., Job No., etc.Type Code Symbol Stamp Authorization No Expiration Date 3.Work Performed by I 6.Ideritification of Components Repaired or Replaced and Replacement Components P.O.BOX 3218 FLORIDA CflY 33034 g.Mentificotion of System Auxz liar Steam ANSI B31.1 55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter N A Quality Group C ss 1981 Addenda Nome of Component t Auxiliary~team Piping Auxiliary Steam Piping Auxiliary Steam Piping Name of Menufoctu er N/A N/A N/A Menufocttrer Serial No.N/A N/A N/A National Bard No.N/A N/A N/A Other identification 80117-H-331-04 80117-H-332-03 80117-H-332-01 Yea Built est.1970 est.1970 est.1970 Repo'red, Replaced, or Replacement Replacement Replacement Replacement ASME Cafe Stomped (Yes or No No No No 7.Description of Work 17-H-331-04 80117-H-3 2-and 80117-H-332-01 were modified to restore original design function.8.Toots Conducted:

ttidrostottc Pres!sotto Morning Opcrotirig PrnssuraQ Other Degree's F NOTE: Supplemental sheets in form of lists, sketches, or draIIgs may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report a included on each sheet, and (3)each sheet is numbered and tho nunher of shoets is recardod at the top ot the form.91-045-3 F0RM Nls-z (Back)Poge 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

~able Manvrocturer'e bale Reports to be attoched and site procedures.

CERTIFICATE OF COMPUANCE Ne certify thot the statements made in the report are correct ond this to the rules of the ASME Code,Section XI, Replacement repair or rep acemen conforms Type Code Symbol Stomp N/A Certificate of Authorization No.Expiration Date N A Signed Owner or Owner's Designee, Title Date ,>gl~CERTlFICATE OF INSERVlCE INSPECTION I, the undersigned, holding a volid commission issued by the Notionol Board'of Boiler and Pressure Vessel Inspectors ond the Stote or Province of Dodo Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwoad MA.have inspected the components descnlx:d in this Owner's Report during the period 7/91 to 9 91 , ond state that to the best of my knowledge ond belief, the Owner has performed examinations and token corrective measures described in this Owner's Report in accordonce with the requirements of ASME Code,Section XI.By signing this certiFicate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations ond corrective meosures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind ing from inc e Sllinehre 19~F or connected with this inspection.

Factory Mutual System Commissions N I Hasanal Boant, State.~ond Endoreemenb FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 2.Plant FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 October 10, 1991 Sheet 1 of Unit PWO: 0606 WA¹910120110746 Address Q(prk Perfprmed by FLORIDA POWER 8E LIGHT Name P.O.BOX 3000, FLORIDA CITY, FL 33034 Address Raper Organization P.p.No..Job No.etc.Type Code Symbol Stomp N/A Authorization No.N/A Expiration Date N/A 4.Identification of System Auxiliary Feedvrater Quality Group 5.(o)Applicable Construction Code ARSf 8811 1955 Edition.R'A Addenda, RXA Code Case (b)Applicable Edition of Section Xt Utilized for Repairs or Replacements 1980, Edition, Winter 1981Addendo 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Check Valve Name of Manufacturer elean Valve Co.Manufacturer Serial No.N/A Notional Board No.N/A Other Identification 3-10-001 Year Built EST.1970 Repaired, Replaced, or Replacement Replaced ASME Code Stamped (Yes or No)No Check Valve Pacific Valve Co.N/A N/A'-10-001 1991 Replacement No 7 Descriptjpn pf'gprk RePlaced valve tag¹3-10-001 due to degraded valve seat and disc assy.6.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other pressure la88 psi Test Temp"T

Dearee's F NOTE:

Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X llin., (2)information in items 1 through 6 on this report is included on eoch sheet.and (3)each sheet is numbered and the number of sheets is recorded at the top of thisform...

91 047 3 FORM NIS-2 (Back)Page 2 of 2 All welding was performed inaccordance with the FPL lVeld Control hfanual and site 9.Remorks Applicable Manufacturer's Doto Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this P conforms repas or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorizatio o.N/A Expiration Date N/A Signe Owner or Owner's Designee, Title Date i~~~~Tg~f CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht mutual Insurance Com an of Norwood, hfA.=have inspected the components described in this Owner s Report during the period'"" y to A ril 3, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

In ctor's Signotvre Commissions Factory mutual System 0230 N I National 8oard, State.Province, and bndorsements Do Pago 1 of 2 FORM NIS-2 ONNER'S REPORT FOR REPAIRS OR REPlACEMENTS As Required by tho Provisions of tho ASME Codo Section XI O n FLORDA POWER a LIGHT P.O.BOX 029100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by P 0 0 1 RIDA flY 33034 4.Identification of System Date 10/21/91 Sheet'of Unit CII: 30 1 h1 Repat CrgofthaUon P.O.No Job No.s etc.Type Code Symbol Stamp Authorization No Expi'ation Date Quality Group B (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addonda 6.Identification of Components Repaired or Replaced and Replacornent Components Name of Component Name of Monufadurer Manufocte er Serlol No.National Bocrd No.Other Identification Yecr Built Repaired, Replaced, or Replacement t COMPONENT C LING i/AT R N/A N/A 3-ARH-114 EST.1970 REPAIRED NO 7 D t f W k INSTALLED (2)7/8 u LOG KNUTS ON U BOLT AND (2)3/4" LOG KNUTS ON EYE RODS-RESTORED SUPPORT 3-ARM-114 BACK TO ORIGINAL DESIGN 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other ft/A Pressure psi Test Temp Degree's F~~NOTE: Supplemental sheets in form'of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items s1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-048-3 FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

hpp5cobie Monvfactviei'e Data Repets to be attache4 BOLTED COI'iHECTIOHS HO'l(ELDIt<G PERFORMED CERTIFICATE OF COMPUANCE We certify that the statements made ln the report are correct and this to the rules of the ASME Code,Section XI.REPAIR conforms repa r or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No, N A Expiration Date N A Signed Owner or Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwrl ht Mutual insurance Com n of Norwood MA.have inspected the components described ln this OwneCs Report during the period m4 t and state that to the best of knowledge and belief, the Owner has performed examinotions and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

nepector'e Slgnatvn D~S 19'ommissions Factory Mutual System 8230 N I Hascnal scant, State, Pnwhce, ond Endowments Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the'ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Nome P.O.BOX 3000, FLORIDA CITY, FL 33034 Address October 22, 1991 Sheet 1 of Unit 3 PWO: 2477 WA¹910904122549 Repar organization P.O.No..Job No.etc.Performed by FLORIDA POWER&LI HT Name P.O.BOX 3008, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Containment Spray Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification epaired, B It Replaced or Replacement ASM'ode Stamped (Yes or No)CTMT Spray Pmp pull Out Assy Goulds PumPs In CTMT Spray Pmp p ll 0 t A Goulds Pumps In 416929 N400023-1 N/A N/A 3P214B 3P214B 1906 Replaced Repl acement No No 7 D ascr j tjo n of'Work Repl aced the CTMT Spray Pump Pull out Assembly due to excessive seal le alcage.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operoting Pressure Other Pressure 295 psi Test Temp gg Degree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet.and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-049-3 FORM NIS-2 (Back)Page 2'of 2 9Refnarkshfechanical connection,No welding perf ormed Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this P conforms repair or replacement to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authorization o.N/A Expiration Date N/A Signed W).ner or Owner's Designee.Title Date 4'~CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arlcwri ht hiutual Insurance Com an Dade County, Florida of and employed by Norwood, hfA.have inspected the components described in this Owner's Report during the period Se tember 18.1991~and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with the inspection.

I ector's Signature Oat Commissions Factory hiutual System 8230 N I National Board, State, Province, and Endorsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address October 23, 1991 Date Sheet 1 of Unit 3 PWO: 2473 WA¹910902174746 PWO: 2858 WA¹9004210 145 17 Repar Organization P.O.No..Job No.etc.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Dote N/A N/A 4.Identification of System Chemical&Volume Control Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Repaired, Built Replaced or Replacement ASME Code Stomped (Yes or No)Control Valve Copes Vulcan N/A N/A CV-3-310A EST.1970 Replacement No 7 Desci jptjon of Work Replaced the bonnet, studs and nuts on valve at tag location CV-3-3 1 OA, 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other pressure 22I!p psi Test Temp ggg Degree's F'RCS Overpressure Test, was performed in accordance with OP 1004.1 on 9/22/91 NOTE: Supplemental sheets in form of lists, sketches, or drawings moy be used, provided (1)size is 8 1/2 in.X 11in., (2)informotion in items 1 through 6 on this report is included on each sheet,'and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-050-3 FORM HIS-2 (Back)Page 2 of 2 Mechanical connection, No welding performed.

9.Remarks Appiicoble Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this P m conforms to the rules of the ASME Code,Section XI.Type Code Symbol Stamp N/A Certificate of Authori tion No N/A Expiration Date N/A gg,d 4'A>ilT7&crf: Owner or Owner's Designee.Title Date CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arlcwri ht Mutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner's Report during the period to October 10, 1991 , and state that to the best of my knowledge and belief.the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the insp'ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Dt+19 Inspector's Signature Commissions Factory Mutual System 0230 N I National Board, State.Province.and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER lla LIGHT Name P.O.BOX 029100.hIIAhfi.FL 33102 October 25, 1991 Sheet 1 of Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Unit PWO: 1032 WAts 901214170247 3+ark Performed by FLORIDA PO ER 8E LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Repa'r Crganization P.O.No., Job No.etc.Type Code Symbol Stamp N/A Authorization No.N/A Expiration Date N/A 4.Identification of System Reactor Coolant System Quality Group 5.(a)Applicable Construction Code AtfSt 031 1 19 55 EdiUon.ffiA Addenda, ff/A Code Case (b)Applicable Edition of Section Xf Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addendo 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Isol.Valve Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification L 3-500 Year Repaired,'uilt Replaced, or Replacement EST.1970 Replacement.

ASME Code Stamped (Yes or No)No 7 Description of)fVork Replaced bonnet studs and nuts on valve at tag location 3-500.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure 2280 psi Test Temp Degrees F 530'RCS Overpressure Test performed in accordance with OP 1004.1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, ond (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-051-3 FORM NIS-'2 (Back)Page 2 of 2 Mechanical connection, No welding performed.

9.Remarks Applicable Manufacttser's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this P e conforms repair or replocement to the rules of the ASME Code.Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Date DÃCERTIFICATE OF INSERVICE INSPECTION I, the undersigned.

holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arkwri ht Mutual Insurance Com an Dade County, Florida of and employed by Norwood.hIA.hove inspected the components described in this Owner's Report during the period to Se tember 23.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective meosures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

nspector's Signatts e Da 19~i Commissions Factory hiutual System 8230 N I National Board, State, Province.ond Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Nofne P.O.BOX 029100, hfIAhfi, FL 33102 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 A dress October 29, 1991 Sheet 1 of 1 Unit PWO: 0629 NCR+N-91-0306 Repar Organization P.O.No..Jab No.etc.3)fgiork performs(l by FLORIDA POWER&LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stomp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Condensate Storage Quality Group 5.(o)Applicable Construction Code AHSi 881 1 19 55 Edition.HiA Addenda, Nia Code Case (b)Applicable Editidn of Section Xt Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component on ensa e Storage Name of Manufacturer N/A Manufacturer Serial No.National Board No.N/A Other Identificotion 3TB Year Built EST.1970 Repaired, Replaced, or Replacement Repaired ASME Code Stamped (Yes or No)No 7 D rf)N rk Repaired several pits on manway, I/16" in depth, by welding.8.Tests Conducted:

Hydrostotic Pneumatic Nominal Operating Pressure Other Pressure Static Head psi Test Temp 81.6 Degree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-052-3 FORM NIS-2 (BCICk)Page 2 of-2 All welding was performed inaccordance with the FPL Weld Control Manual and site 9.Remarks Applicable Manufacturer's Data Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this>conforms to the rules of the ASME Code.Section XI.Type Code Symbol Stamp N/A Certificate horizotion N N/A Expiration Date N/A Signed Owner or Owner's Oesignee.Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned.

holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida Arkwri ht Mutual Insurance Com an and employed by of Norwood.MA.have inspected the components described in this Owner's Report during the period to Se tember 7, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspector's Signature 19HZ Cofnmissions Factory Mutual System 6230 N I National Board, State, Province, and Cndorsements

~~0 0~0~0 0 Qg 0~s 0~~~~~~~~t'~~~~~~~II~~~~~I~~~~.~ll>~i'%la~I~t~~~~~~~~~~I~~~I~~~~lt lHI~~t'~~'~~~~~'~t~~~~~~~~~'~~~~~~~'~'~~~I~~~~~~~~~~~~~~~~~'~~~~~~~~~~~~~~~~~I.~,II.O.ls~L~R L~R L~R~a~~~I tI~II~~~~~I~~~~~~~~~~~~~4'~~~'~~~i~~~~-I I~~~~'~~~~~~'~~~~~~'~~~~~~~~~~~~~~t~~~~~I FORM NIS-2'(Back)Page 2 of 2 Examinotfons performed by FPL Construction Quality Control personnel.

Pypheble Ltanufocbjaw'e Data Reporte to be attoc9eef ALL WELDING WAS PERFOBIIED IN ACCORDANCE W CERTIFICATE OF COMPUANCE We certify that the statements made ln the report are correct and thfs to the rules of the ASME Code,Section XI.REPAIR repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate af Authorization No, N A Expiration Date N A Signed Owner or Owner's Designee, Title ,>s~l CERTIFICATE OF INSERVICE INSPECTION f, the undersigned, hofdfng o valid comrnfssion issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dodo Coun Florida and employed by Arkw ht Mutual Insurance Com of Norwood MA.have inspected the components descrtbad ln this OwneCs Report during the period to 8 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or fmplied, concerning the examinaUons and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Factory Mutual System Commissions N I Hatbnot Board, State, Pn9vtnce, and Endoroements Inepecto1 e Senators Dote~~

~$0 0 P~I Q l 0 Q P~0 J gy~~~~~~,~~~~~I'l o~~I o~o~~~~I ol~I~~~o~-'.~~~~~alla~I all~I~~~~~~~~~~~~s~~.~~~~~~~~~o~~o~~~~~l'~o'~~~~'~~~~~~~~~~~~'~~~~~~~~~~'~~~I~~~~~~~~~~~~o o o~~'~o~~~~~~~~~~~~~~~\~~o~~~0 lo~~.t I o~~~~lo~~~~~~~~~~~~~~~~~~~~.~~~~~~~-.~~~~~~~~~I~~o~~~~~~~~~~'~~~~'~~~~~~~~~~~

FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction QuaiIty Control personnel.

ApplcoSie MonufoctureA Data Reports to bo attoched ALL WELDING WAS PERFORPAD IN ACCORDANCE WI H PROCEDURES

.CERTIFICATE OF COMPUANCE We certify that the statements made In the report are correct and this to the rules of the ASME Code, SecUon XI.PEPAIR conforms repa r or repacemen Type Code Symbol Stamp N/A Certificate of Authorization No, N A Explrabon Date Signed Owner or Owner's Designee, TIUe me ll>i CERTIFICATE OF INSERYICE INSPECliON I, the undersigned, holding a valid commission issued by the NaUonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida ond employed by Arkwrl ht Mutual Inswance Com n of Norwood MA.have inspected the components described In this Owner's Report during the period 4/to and state that to the best of my knowledge and belief, the Owner has performed exaininaUons and token corrective measures described in this Owner's Report in occordonce with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or 1mplied, concerning the examinations and correcUve measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be Sable in any manner for any personal injury or property damage or a loss of any kind eri ng from or connected with this inspection.

Dot n e Sitinoture F9~8 Commissions factory Mutual System 8230 Nationat Boot@, State, Pnntnce, and Endanemonte Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requred by the Provisions of the ASME Code Section XI Ow'ner FLORIDA POWER 8c LIGHT P.O.BOX 029100 MIAMI FL 33152 Date Shoot 3 of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Unit CWO c 300318 PS: 91-731 Repel tkpontcotbn P.O.NoJob No., etc.3.Work Performed by P O.3 1 ORID IIY 330~oee 4.Identification of System Type Code Symbol Stamp Authorization No Exp'ration Date Quality Group (b)Applicoble Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repared or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.NaUonal Bard No.Other IdenUIIcation Yacr Built Repaired, Rapla<<ad, cr Replacement EST.7.Description of Work P ORT 3-CCH-14 was reworked to its ori inal desi n-er 5613-H-588 sht.1 rev.0 8.Tests Conducted:

Hydrostatic Pneumotic Nominal Operating Pressive Other XX NA Pressure NA psi Test Temp.t Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 an this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-054-3 FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel, hppitcattts Manvtocturete Doto tepee to ba tatcohtt ALL WELDING WAS PERFORMED IN ACCORDANCE WITH THE FPL CONTROL I4ANUAL AND SITE PROCEDURES

.CERTIFICATE OF COMPUANCE Wo certify thot the statements made In the report are corroct and this REPAIR to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Typo Codo Symbol Stamp N/A Certificate of Authorization No.N A~Expiration Date Signed Ownor or Owner's Designee, TiVe , 19 CERilFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boilor and Pressure Vessel Inspectors and the State or Province of Dado Coun Florida and employed by Arkwrl ht Mutual Insurance Com n of Norwood MA.havo inspected tho components described In this Owner's Report during the pe NZc 4/FPx and state that to the best of y knowlodge and bellof, the Owner has performed examinotions and taken corrective meosures described in this Ownei's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, oxpressed or Implied, concerning tho examinations and correctivo measures described In this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

I Factory Mutual System Commissions N I Na59hai Baont, hta, Pn99thca, ahd Gldo aa9nahta Ih~sighatttta Date~~~19~

Page 1of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by)he Provisions of the ASME Code Section XI 1 0FLORIDA POWER dc L HT P.O.BOX 029100 MIAMI FL 33152 Date Shoot~ot 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CfIY FL 33034 Unit&10: 300318 MPIL: 91-384M R~areonhotbn p.a.Ho., Job No~ole.Atftrooe 3.Work Performed by Nome Type Code Symbol Stomp Authorization No Exp'rotion Date P.O.X 21 ORI A 4.Identification of System 5.(a)Applicable Construction Code (b)Applicable Edition of Section CfIY 33034 Quolity Group C NG SYSTEM XI Utilized for Repa'rs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repa'red or Replaced and Replacement Components Nome of Component Name of Monufoct tr e'fanufoct tr or Serial No.National Bard No.Othe'dentMcaUon Yotr Built Repaired.Replaced, or Replocoment COMPONENT LING NA NA NA 253-1 EST.1970 REPAIRED NO 7.Description of Work R INAL DESIGN PER 5613-H-588 sht.6 rev.0 8.Tests Conducted:

Hydrostatic Pneumotic Nominal Operating Pressure Other XX NA Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)informotion in items 1 through 6 on this report is included on each sheet, ond (3)each sheet is numbered and the number of sheets is recorded ot the top of this form.91-056-3 FORM NIS-2 (Bock)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel, App5cable MenMfactureA Dote Reports 1o be ottoctied 7 m S PROCEDURES.

CERTIFICATE OF COMPUANCE We certify that the statements made ln the report are correct and this P<P~iI to the rules of the ASME Code, SecUon XL repaIr or repocemen conforms Type Code Symbol Stomp N/A Certificate of Authorizatio No.Expirotlon Date Slgned-Owner or Owner's Designee, TrUe Dote~k/CERTIFICATE OF INSERVlCE INSPECiION I, the undersigned, holding o valid commission Issued by the NOUonal Boord of Boiler and Pressure Vessel Inspectors ond the State or Province of Dade Coun Rorida and employed by Arkwrl ht Mutual Insurance Com n of Norwood MA.have Inspected the components described In this Owner's Report during the period~~f to//'nd state that to the best of my knowledge and belief, the Owner hos performed examinations and token corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes ony warranty, expressed or implied, concerning the examinations and correcUve meosures described ln this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any monner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

n~Signature Dot>g 7/Foctory Mutual System Commissions N I HCIIOnol Boold, QOQ,~OIK$EAdOfNKTI4htS Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

's Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Norns P.O.BOX 3008.FLORIDA CITY.FL 33034 Address November 4, 1991 Sheet 1 of Unit 3 PWO: 2110 WAtt 900010004651 Repas'rganization P.O.No..Job No;etc.Work Performed by FLORIDA POWER 8c LIGHT Name P.O.BOX 3000.FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identificotion of System Containment Spray Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980.Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component CTMT Spray Pmp Pull Out Assy.CTMT Spray Pmp Pull Out Assy.Name of Manufacturer Goulds Pumps In Goulds Pumps In Manufacturer Serial No.N/A N/A National Board No.'/A N/A Other Identification 3P214A 3P214A Year Built Est.1970 1909 Repaired, Replaced.or Replacement Replaced Replacement ASM'ode Stomped (Yes or No)No No 7 Descri tion of Work Replaced the CTMT Spray Pump Pullout Assembly due to excessive seal leakage.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp t4>tgegree's F t NOTE: Supplemental sheets in form of lists, sketches.or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet.and (3)each sheet is numbered and the number of'sheets is recorded at the top of this form.91-057-3

~FORM NIS-2 (Back)Page 2 of 2 9 Remarks hfechanical connection,No welding performed Applicoble Manufacturer's Ooto Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this p conforms to the rules of the ASME Code.Section XI.Type Code Symbol Stamp N/A Certificate of Authorizoti No.N/A Expiration Date N/A Signe Owner or Owner's Designee, Title~19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned.

holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Arlcwri ht hfutual Insurance Com an Dade County, Florida of and employed by Norwood.hfA.have inspected the components described in this Owner's Report during the period 25.1991 to September 4.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinotions and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind orising from or connected with the inspection.

Inspector's Signature Commissions Factory Mutual System 0230 N I Notional Board.State.Province.ond Cndarsements Page 1.of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O n FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 2 Plant TURKEY POINT P.O.BOX 3088 R ORIDA CllY R.33034 11-04-91 Sheet t of Unit CIIO: 300318 PS: 91-506 Rdpot Orponhouon p.a.NoJob No., etc.3.Work Performed by Type Code Symbol Stamp Authorization No P.O.OX 1 I A 034 Exp'ration Date identification af System RESIDUAL HEAT REIIOVAL SYSTEM Quaiity Croup 8 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repal'ed or Replaced and Replacement Components Name of Component t RESIDUAL HEAT REt10VAL SYS Nome of Menvfacte'er NA Manvfoctu e Serial No.Notional Bocrd No.NA Other ldontNcaaon SR-5 Yoa 6vtlt EST.1970 Ropai ed.Replaced, or Roplecamant REPAIRED NO 7 D,,;pt;n f W I, SUPPORT SR-5 WAS RESTORED TO ORIGINAL DESIGN PER 5613-H-585 SHT 6 e REV.0 8.Tests Conducted:

Hydrostatic Pneumatic Hominai Operating Pressree Other XX'A t Pressure A psi Test Temp NA Degree's F NOTE: Supplementol sheets in form of lists, sketches, or drawings may'be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered ond the number of sheets is recorded at the top of this form.91-058-3 FORM Nls-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

Apptbcklo MonufoctunA Doto Ropxts to bo ottocho4 ALL WELDIflG kiAS PERFORPIED Itl ACCORDAHCE i'ITH THE FPL COI'TROL MANUAL Al'lD SITE PROCEDURES.

CERTIRCATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.REPAIR conforms repair or rep acemen Type Code Symbol Stomp N/A Certificate of Authorization No.N A Expiration Date SIgned/Owner or Owner's Designee, Title ,~g<l CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorlda and employed by Arkwrl ht Mutual Insurance Com n have inspected the components described ln this Owner's Report during the period to and state that to the best of my knowledge and belief, the ner has performed examinations and taken corrective meosures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes ony warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.'lePeclN'

$9 d 9 6+19 Factory Mutual System Commissions N I NDUonoi Board, Stoto, Pro9tnce, ond Endo1nemonto Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPlACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dt LIGHT P.O.BOX 029100 MIAMI FL 33152 Date 11-6-91 Sheet 1 af 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CnY FL 33034 Uji NCR-N-89-0327 Ropot Craonhotbn P.O.No., Job No., etc.,3.Work Perfumed by.0 OX 3 1 ORIDA CIIY ldentif(cation of System COMPONENT I Type Code Symbol Stamp Authorization No 33034 Expiration Date COOLING llATER Quality Group n)n"*'(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Componont Name of Manvfactwar Manufactwor Serial No.National Boe d No.Othe'dentlflcation Yae Built Rape'rad, Replaced, or Raptacamant ASME Code Stomped (Yaa cr Na CCM PIPING CCW PIPING CCW PIPING CCN PIPING CCLJ P IP ING SI PIPING N/A N/A N/A N/A I'J/A N/A N/A N/A N/A N/A"l/A N/A N/A N/A N/A N/A l'l/A 3-ARH-92 3-ARH-114/

SR-343 3-ARH-124 3-ARH-128 3-ARH-137 3-S IH-2 1970 REPAIRED EST.1970 REPLACEMEN EST.1970 REPAIRED EST.1970 REPAIRED EST.1970 REPAIRED 9/0 REPAIRED NO NO l'l0 NO NO NO SI PIPING N/A N/A N/A.SR-166 8/0 REPAIRED NO f Work MODIFIED SUPPORTS 3-ARH-92,3-ARH-114/SR-343,3-ARH-124,3-ARH-128, 3-ARH-137,3-SIH-2 Af'JD SR-166 TO RESTORE THEM TO ORIGII'lAL DESIGtl.8.Tests Conducted:

Nydrostaga Pneumatic Nominal Operatinp Pressure Other N/A Pressure psi Test Temp.Degree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, pravided (1)size is 8 1/2 in.X 11'in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-059-3 FORM Nis-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel, hpp0coble MonufoctureCe Data Reporb to be attached ALL WELDING WAS PERFORMED IN ACCORDANCE l/ITH FPEiL WELD CONTROL MANUAL AND SITE PROCEDURES.

QUALITY GROUP"C" CERTIFICATE OF COMPLIANCE We certify that the statements mode in the report are correct and this REPAIR gt REPLACEME Qonforms to the rules af the ASME Code, Section Xi.repair or rep ocemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Expiration Date N A Signed Owner or Owner's Designee, Title Dote//07 , 19~+CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notionol Board of Boiler and Pressure Vessel Inspectors and the Stote or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected the components described in this OwneCs Report during the period (fez to rH'nd stote that to the best of my knowledge and belief, the Owner has performed exominotions ond token corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report, Futhermore, neither the Inspector nor hfs employer shall be liable in any manner for any personol injury or property damoge or a toss of any kind arising from or connected with this inspection.

Factory Mutual System Commissions N I HcScnol.Scant, State, Provbce, ond Endowments Do Pago 1 of 2 FORM NIS-2 QNNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of tho ASME Codo Soction XI 0 FLORIDA POWER Ik LIGHT P.O.BOX 029100 MIAMI FL 33152 Date 11/7/91 Sheet of 1 1 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Unit CWO:300318 P.S.91-588 Repel'rgonhatke p.a.No., Job No..etc.3.Work Performed by P.O.BOX 3218 ORIDA CITY 33034 Addreee 4.Iden~ication of System Auxiliar Feedwa ter Type Code Symbol Stomp Authorization No Expiration Date Quality Group C.o(u>>'i'*'(b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component AFW Piping Name of Manufacturer N/A Manufactwcr Serial No.N/A National Boa d No.N/A Other Identification 80117"H" 341-18 Yer Built Est.1970 Repa'red, Replaced, or Replocomant Replacement ASME Code Stomped (Yes or No No 7 DW k Modified Support 80117-H-341-18 to restore it to original design.7.Description of Work 8.Tests Conducted:

Hydrostatic Pneumagc Hominal Operating Pressure Other N/A Pressure psi Test Temp.Degreo's F t NOTE: Supplemental sheets in form of lists, sketchos, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form, 91-061-3 FORM NIS-2 (Back)Page 2 of 2 g Remarks Examinations performed by FPL Construction Quality Control personnel.

hpptkeble Manufacturer'e Data Repate to be attache4 All welding was performed in accordance with FP6L Weld Control Manual and site procedures.

Quality Group"C".CERllRCATE OF COMPUANCE We certify that the statements made in the report are correct and this re a me t to the rules of the ASME Code, Section Xi.repair or rep acemen conforms Type Code Symbol Stomp N/A Certificate of Authorization No.Expiration Dote N A Signed Owner or Owner's Designee, TrUe Date l I O , i'.CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Rorida and employed by Arkwri ht Mutual insurance Com n of Norwood MA.have inspected the components described in this Owner's Report during the period~to GccGILL fV and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this cerIicate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage r a loss of any kind arising from or connected with this inspecUon.

tnepector'e Signature Foctoiy Mutual System Commissions N I Nasonct scant, State, Pnwtnce.and Enrioreernente FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100.hIIAhfi, FL 33102 Address TURKEY POINT Name P.O.BOX 3088,'LORIDA CITY, FL 33034 Address November 7.1991 Date Sheet 1 of Unit 3 PWO: 2777, NCRts N-91-0090, 87-0112 Repar Organization P.O.No..Job No.etc.3.Work Performed by FLORIDA POWER Ik LIGHT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Feedwater System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced.or Replacement ASME Code Stomped (Yes or No)Control Valve Anchor Darling N/A N/A CV-3-6275B EST.1970 Replacement No 7 D t f W k Repiacetl the bonnet, repaired two gouges in valve body on valve CV-3-6275B.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure X Other pressure gpttRttTttta psi Test Temp ttpgttttTttta Degree's r NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 1lin., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-060-3 FORM NIS-2 (Back)Page 7 of 2 All welding was performed inaccordance with the FFL Weld Control Manual and site 9.Remarks Applicobfe Manufacturer's Data Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this P conforms to the rules of the ASME Code.Section XI.Type Code Symbol Stamp N/A Certificate of Authorizo'on No.N/A Expiration Date N/A Signed Owner or Owner's Designee.Title Date/4, 19 9r CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County.Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood, MA.hove inspected the components described in this Owner's Report during the period to November 6.1991.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificote neither the inspector nor his employer makes any warranty.expressed or implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Inspector's Signatu e Commissions Factory Mutual System 0230 N I Notional Board, Stote.Province.ond Endorsernents D

~QO~0~0~0~g 0~s~~f~~~I~~~~~~~~~I'l~I~~~~~u'II I~~~:.~II%~i'%la~la a~~~~~~~~~~~~~~~~t~~a~~~~~t~~'t~~~'~~~~~~~'I I~~~~~~~~~~~~~~~~~~~~~0~~~~~II~I II I II II I ll II I~I I I I I~I lie I I1 II II R1 L II~~~~~~g~~g~~~~Imp III RR 55 L RR I I~~~I I~I'I I lo'I'I'il I I>Il o II I I I I'I~J~~~II I II~~~~~~~~~~~-~I~~~~~~~~~~~le FORM Nis-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control porsonnal.

Appsccele QonufoctoteA Ooto Ropcxts to be othche4 ALL IIELDING PERFORIIED IW ACCORDANCE lfITH TH SITE PROCEDURES.

CERTIFICATE OF COMPUANCE Wa certify that tho statements made ln the report are corroct and this REPAIR 8r REPLAC g~nforms to the rules of tho ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorizatio No.Expiration Doto Signed Ownor or Owner's Oesignoe, Title , I9~/CERllFICATE OF INSERVICE INSPECI1ON I, tha undersigned, holding a valid commission lssuod by tho Notional Board of Boilor and Pressure Vessel tnspoctors and tho State or Province af Dado Coun Florida and employed by Arkwri ht Mutual insurance Com n of Norwood MA.havo Inspected tho components doscribed In this Owner's Report during the period if iz to iA'nd state that to tho best of y knowledge and beliof, tho Owner has performed examinotions and token corrective measures dascribod in this Owner's Report in occordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes ony warranty, expressed or Implied, concerning the examinations ond corrective"measures described In this Ownors Report.Futhermore, neither the inspector nor his employer sholl be liable in ony manner for any personal injury or property damage or a loss of any kind arising from ar connected with this inspection.

Foctory Mutual System 8230 inspector' Qgoabrre ca~~~19~K Commissions Haaonol Board, Sbrte, Province, ond Endoreernente Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER 8c LIGHT Name P.O.BOX 029100, hjIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3066, FLORIDA CITY, FL 33034 Address November 12.1991 Date Sheet 1 of Unit 3 PWO: 2413 NCRIs 86-0076 Repa'r Organization P.O.No..Job No.etc.Work Performed by FLORIDA POWER 8I LIGHT Name P.O.BOX 3066, FLORIDA CITY, FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A 4.Identification of System Containment Spray System Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 65 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping CSS Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-SIH-1 Year Repaired, Built p or Replacement EST.1970 Repaired ASME Code Stamped (Yes or No)Piping CSS Piping CSS N/A N/A N/A N/A N/A N/A 3-SIH-2 3-SIH-9 EST.1970 EST.1970 Repaired Repaired No No 7 Description of Work Restored suPPort hid's 3-SIH-1~3-SIH-2 and 3-SIH-9 to it's original design requirements.

8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure p st Test Temp Degrerrs p N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-063-3

.FORM NIS-2 (BCICk)Page 2 of 2 9 Remarks Mechanic a I conn e c ti on, No weI ding p erf orm ed Applicabfe Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE We certify that the statements mode in the report are correct.and this to the rules of the ASME Code,Section XI.repair conforms repai'r replacement Type Code Symbol Stamp N/A Certificate of Authorization No N/A Expiration Dote N/A Signed Owner or Owner's Designee.Titie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arlcwri ht Mutual Insurance Com an of Norwood, MA.hove inspected the components described in this Owner's Report during the period to Jul 9, 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or 1 implied.concerning the examinations and corrective measures described in this Owners Report.Furthermore.

neither the inspector nor his employer sholl be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

Factory Mutual System'See Below" Commissions II23p Inspector's Signature National Board, State, Province.and Endcrsements

'Fresented to ANII.ANII has elected not to sign NIS-2 prior to his arrival on site.Daie 19 Page 1.of 2 FORM NIS-2 QNNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Roquirod by the Provisions of tho ASME Codo Section XI 1 Owner FLORIDA POWER Ik LIGHT P.O.BOX 029100 MIAMI FL 33152 11-12-91 Date Shoot ot 1 1 2 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 Und'It NC R-N-91-0558 Rcpo'I Oyaotttcouon P.O.NoJob Noetc.Quality Group B Type Code Symbol Stamp Authorization No.0 OX 3218 FLO IDA C 3 034 Expiration Date 4, identification of System Safet In ecti On S Stem r'ru i"'(b)Applicable Edition of Section XI Utilized for Repars or Replacements 1980, Edition, Winter 1981 Addenda 6.Identificotion of Components Repared or Replaced and Replacoment Components Home of Component Safety Injection Safety Injection Horne of Lfonufoctur or NA NA Manufocte'cr Sarlol Ho.NA NA Hatlctnal Boo'd Ho.NA NA Other Idantlncatlon 8080-H-005-01 8080-H-006-03 Y~Built EST.EST.1970 Rapat ad.Raplacad, or Raplacarnant Re aired ASLK Code Stamped (Yaa or Ho NA Safety I ection NA NA NA 8080-H-007-01 EST.1970 Replacement NA Safety Injection NA NA 8080-H-EST.1970 Repaired NA Safety Injection Safety In'ection NA NA 8080-H-007-09 8080-R-007-01 EST.1970 EST.RepIacement NA Repaired 7 D t f w k Restored supports to ori gi na 1 desi gn per 5 177-H-56 Rev 7 and removed anchor bo1ts per CN-2.24 Rev 6 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Prcssure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, a drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)informotion in items 1 through 6 on this rcport is included on each sheet, ond (3)each sheet is numbered ond the number of sheets is recorded ot the top of this form.

FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

hpphcoble ManuloctureA Dote Reports to be ottoched ALL MELDING'llAS PERFORtIED IN ACCORDANCE)lITH FP8rL 1/ELD CONTROL MANUAL AND SITE PROCEDURES CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this REPAIR AND REPLACENQgforms to tho rules of tho ASME Code,Section XI.Typo Code Symbol Stamp N/A Certificoto of Authorization No.N A Expiration Date Signed Ownor or Owner's Dosignee, Title Dato Il/, 19+CERTIFICATE OF INSERVlCE INSPECTION I, the undersigned, holding a valid commission bsued by tho Notional Boord of Boiler and Pressure Vessel inspectors and the Stato or Province of Dade Coun Fiorfda and employed by Arkwrl ht Mutual insurance Com n of Norwood MA.havo inspected the components doscnbod}n this Owner's Report during tho pe to r F<r and state that to the best of my wledge and beliof, the Owner has performed examinations ond taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.By signing this certificote neithor tho inspector nor his employer makes ony warranty, expressed or implied, concerning tho examinations and corrective measures described In this Owners Report, Futhermoro, neither the inspector nor his employer shall be tioble in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~e Sntnaturo 19~Foctory Mutual System Commissions N I Houonol Boord, Slots, ProAnce, ond Endcreemonte Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 FLORIDA POWER 8c LIGN P.O.BOX 029100 MIAMI FL 33152 Date NOVEt1BER 12, 1991 Sheet 1 of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CllY FL 33034 3.Work Performed by Name P BO 218 ORIDA C FL 33034 Unit CWO:300318, PS 91-61, CR: N-91-0550 0551 0552,0761 Repat'rttontzauon p.a.Ho., Job No., etc.Typ'e Code Symbol Stamp Authorization No Expiration Date 4, Identification of System HIGH HEAD SAFETY II'l JECTIOl'I Quality Group A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identificotion of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufocttrcr Manufacturer Serlctl No.Notional Bocrd No.Other ldontlficatlon Yecr Built Repo red.Replaced, or Replacement ASME Code Stamped (Yes or No PIPING SIS NA PIPING SIS NA PIPING SIS tlA PIPING SIS tlA NA NA NA HA NA SUPPORT uF'A SUPPORT"E" HA SUPPORT uDu SUPPORT u427Bu EST.1970 REPAIR EST.1970 REPAIR NO NO EST.1970 REPLACEMEtlT tl0 EST.REPLACEMENT NO PIPING SIS HA NA I'lA 8051-R-528-01 EST.1970 REPLACEMENT NO EST.1970 PIPING SIS HA HA PSI I EST.1970 REPAIR NO ORT uFu TEMIII4 AND INST'E ADJUSTED ALLEDI,4)LOCKNUTS, SUPPOR ORT"D-ADJUSTED U BOLT AND SUPP-REPLACED I ND ADDED(4)WITH NEll ITEMS 3,25, PSII-INSTALLED LOCKNUT 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operatinp Pressure Other N/tt 7 Description of'Work ITEtlS 2,3 A LOCKNUTS, SUPP ADDED(2)JAM NUTS, SUPPORT 427B-REMOVED ITEMS 1,6 Al'lD REPLACED WITH NEW ITEM6, SUPPORT 8051-R-528-01-REPLACED U BOLT ITEM 23, SUPPORT PSIII-REMOVED EXISTING ITEMS 3,25 AND REPLACE[Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.~~X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form, 91-065-3 FORM NIS-2 (Back),Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.

Pppiicobie ttanufocturei'e Data Reports to be attached ALL WELDING PERFORtriED IN ACCORDANCE WITH THE FP8iL WELD CONTROL hiANUAL AND SITE PROCEDURES.

CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this conforms REPAIR 8r REPLACEt1ENTc to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.Signed&4 Ji Mrtscllcic Sire Awe-.5'vcs.Bee.Expiration Date~IZ 7 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have in ct d e components described in this Owner's Report during the period to and state that to the best of my kno edge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind'sing from or connected with this inspection.

In e Signature 19~+Factory Mutual System Commissions N I Nattcnol Board, Stote, Province.ond Endoreeinente FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENS Ae Reqdred by the Provlaforl of the ASME Code Section XI I 1.Owner 0 IDA 4 UG P.O.BOX 029100 MIAMI FL 33152 November 12 1991 Shaet of 2 2 N A 2.Plant TURKEY POINT Unk 3 Nome CllO: 300318 PS91-618,626,649,951 P.O.BOX 3088 FLORIDA CflY FL 33034 761 Ad4we Itepotr Organtratton M.tto Ak ttoeto.3.Work Performed by BECHTEL CONSlRUCTION INC.Type Code Symbol Stamp Authorlzatlon No N A DA ITY FL 3034 Explratlon Data howe g Identlflcatlon of Sytttem HIGH HEAD SAFETY INJECTION tl4'-B31.1 (b)Applicable Edklon of Section XI Utilized for Repalra or Replacement!

1980, Edklon, Winter 1981 Addenda 8.Idantlflcatlon of Components Repaired or Replaced and Replacement Componenta Monufocturer Serhl No.Repaired, Replaced, or Replocement Stamped (fee or No)PIPING SIS PIPING SIS P P NG SIS PIPIl'IG SIS PIPING SIS PIPIWG SIS PIPING SIS NA.-.WA WA WA NA WA WA NA NA WA NA NA NA WA NA NA WA 8080-H-009-05 8080-H-010-08 8080-H-010-09 8080-H-010-10 8080-H-010-11 8080-H-009-02 SOSO-H-009-09 EST.1970 REPAIRED WO EST.1970 REPLACED l'lO EST.1970 REPLACED WO EST.1970 REPAIRED EST.1970 REPAIRED NO EST.1970 REPAIRED WO EST.1970 REPAIRED WO 7 Deacrlptlon of Work SUPPORT 8080 H 009 05 AD JUSTED EXISTING U BOLT>>SUPPORT 8080 H 010 OS-11 ADJUSTED EXISTING U BOLT AND REPAIRED WELD ON ITEN TO EtiBED SUPPORT 8080-H-009 TIGHTENED EXISTING HUTS, SUPPORT 8080-H-009 EXISTING EYE ROD l!AS CUT TO SUIT 91-065-3 Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER L LIGHT Name.P.O.BOX 029100, MIAMI.FL 33102 Address TURKEY POINT Nome P.O.BOX 3088, FLORIDA CITY, FL 33034 Address November 14.1991 Sheet 1 of 1 Unit PWO:6208 PC/hi¹91-077 NCR¹N-91-0147 P/S¹91-786 Raper Organization P.O.No..Job No.eta.Pe formed byCOMBUSTION ENGINEERING INC Name 1000 PROSPECT HILL RD, WINDSOR, CT.06095 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Reactor Vessel Quality Group A 5.(a)Applicable Construction CodeAShiE Section III 1g 65 Edition, N/A Addenda, N/A Code Cose (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year RePaired, Built RePlaced, or Replacement ASM'ode Stamped (Yes or Na)Babcoclc Ik Wilcox Pressure Vessel 610-0116 N-160 3PSRV1 1969 Repaired Yes 7 Description of'Work Repaired the Core Exit Thermocouple Port 5 1 by cutting and installing welded tube lu.8.Tests Conducted:

Hydrostotic Pneumatic Nominal Operating Pressure Other Pressure Pst Test Temp se" Dense's r'Performed RCS Overpressure Test in accordance with OP 1004.1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1i2 in.X 11in.~(2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-068-3 FORM HIS-2 (Back)Page 2 of 2 All welding was performed inaccordance with the FFL ill'eld Control Manual and site 9.Refnarks Applicable Monufocturcr's Dato Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair raper or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorizat'o.

N/A Expiration Date N/A Signed ner or Owner's Designee.Title~19~7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the Notional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood.MA.have inspected the components described in this Owner s Report during the period M'y to Se tember 1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with the inspection.

specter's Signature Commissions Factory Mutual System 0230 N I National Board, State.Province.and Endarsements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER&LIGHT Name P.O.BOX 029100, MIAMI, FL 33102 Address TURKEY POINT Name P.O.BOX 3088, FLORIDA CITY, FL 33034 Address Date November 14, 1991 Sheet 1 of Unit 3 PWO: 2110 NCRss 90-0094 CNFss 90-3-0021 Repa'r Crgonizotion P.O.No., Job No.etc.Work Performed by FLORIDA POWER&LIGHT Name P.O.BOX 3088.FLORIDA CITY.FL 33034 Address Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A N/A 4.Identification of System Component Cooling Water Quality Group 5.(a)Applicable Construction Code ANSI B31 1 19 55 Edition, N/A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Pipin'g CCW Name of Manufacturer N/A Manufacturer Serial No.N/A National Board No.N/A Other Identification 3-BAH-26 Year Built EST.1970 Repaired, Replaced, or Replacement Repaired ASM'ode Stomped (Yes or No)No 7 Description of'Work Repaired defective weld and reset, spring can to it's proper cold load setting.8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp Degree's r N/A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.~91-067-3 FORM NIS-2 (Back)Page 2 of 2 E All welding was performed inaccordance with the FPL Weld Control htanual and site 9.Remarks Applicobte Manufacturer's Data Reports to be attached procedures.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report ore correct and this to the rules of the ASME Code.Section XI.repair repair or repiacement conforms Type Code Symbol Stamp N/A Certificate of Authorization No.iV/A Expiration Date N/A Signed Qv Owner or Owner's Designee,'litle Date 19 I I CERTIFICATE OF INSERVICE INSPECTION I~the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade County, Florida and employed by Arkwri ht hfutual Insurance Com an of Norwood, hfA.have inspected the components described in this Owner's Report during the period to July 25.1991 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any worranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Furthermore, neither the inspector nor his employer shall be liable in ony manner for any personal injury or property damage or a loss of any kind rising from or connected with the inspection.

Inspector's Signature Commissions Factory mutual System 0230 N I National Board, State, Province.and Endorsements Page 1 of 2 FORM NIS-2 ONNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Requirod by the Provisions of tho ASME Code Section XI 1 0 FLORIDA POWER 8c LIGHT P.O.BOX 029100 MIAMI FL 33152 pate H hIBER 15 1991 Sheet of 1 2 Unit Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 6.Identification of Components Repaired or Replaced and Replacement Components CIlo:300318, PS91-580, HCR-N-88-0087 Add'ceo Rttpat Raantzatbn p.a.No..Job No., etc.e 3.Work Performed by I.Type Code Symbol Stamp Authorization No P.O.BOX 321 FLORIDA CIIY F 33034 Expiration Date A 4.Identification of System HIGH HEAD SAFETY INJECTION Quality Group'.((u i*"""-55 (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda Name of Component Name of Manufacturer Manufacturer Serial No.Nabonal Boa'd No.Other Identification Year Built Repared, Replaced, or Replacement ASME Code Stamped (Yes or No PIPING SIS PIPING SIS NA HA NA HA SR-121 HA SR-'122 Bio EST.1970 REPLACEIylEHT REPAIRED NO NO PIPING SIS PIPING SIS PIPING SIS PIPING SIS PIPING SIS flA HA I'lA NA HA HA NA NA NA NA 3" S IH-69 HA SR-125 NA SUPPORT"C" I'IA 5613-H-59 13--59 SHEET 26 B EST.1970 E 1970 EST.1970 EST.1970 REPAIRED REPAIRED REPAIRED REPLACEhIENT REPAIRED HO HO tIO HO NO 7 P pt f'w k SR-121-REPLACED HEX NUTS, SR-122-REMOVED SHIN PLATE ITEll6 3-SIH-69-READJUST U BOLT AtID ADD 2 HEX NUTS, SR-125-OBTAINED PROPER CLEARANCE AND ADDED NUTS, SUPPORT"C"-'EADJUST 8I TIGHTEN LOAD BOLT ITEN'1.SUPPORT"A" 5613-H-597/SHT 25B-REPLACED ITEh1 3,SUPPORT nAn5613-H-597~T26B-ADJUSTED t0 U BO~S.Tests Conducted:

Hydrostatic Pneumatic~Hominai Opsratinp Pressure~Other NA Pressure psi Test Temp.Degree's F t NOTE: Supplemental sheets in form of lists, sketches, or drawings may be usod, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and'(3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-069-3 FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

Ppp5cabie Monafoctarer'e Data Reporte to be attached ALL HELDItiG PERFORMED Ill ACCORDAtlCE llITH FP8iL 1'ELD CONTROL tNNUEL AND SITE PROCEDURES.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR a REPLACEt'IEtiTconforms to the rules of the ASME Code,Section XI.repair or rep acemen Type Code Symbol Stamp N/A Certificate of Authorization No.N A Aw J.R~s/KC Signed A.sire~~r.~~.~er., Owner or Owner's Designee, Title Expiration Date N A CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have inspected th components described in this Owner's Report during the period 1%6 to and state that to the best of my kn edge and belfef, the Owner has performed exominations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section N.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personol injury or property damage or a loss of any kind arising from or connected with this inspection.

r Factory Mutual System Commissions N I HaUonol Boord, State, Province, ond Endoreeinente

~Q 0~~~~0~0 0 0~k I I wILdHi I~I o~~~'I'.~~~~'I~~~I I II~0~~~~~~~~~~~~I~~~I~I I I J~I~!~I~~~~~~~~~~I~~~~~~~~~~5 R1~m Rl I l~)~~I~RR RS 81 R1%5 mm E5~I~)~I~)~I~~I~I~)~I~~I~)RR RS RR ES 55 t lat~L~~I I~~I~.~~~~I Jl~~I~~I I))I'l I I'l I~I

Page 1.of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 0 nor FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 P(ant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by I O.0 21 IDA 3 0 g Identification of System REACTOR COOLANT Date NOVEt~fBER 18, 1991 Shoot~of Unit CNO: 5004381 PS91-645 llCR-N-91-0077 Ropoh areofttzauon P.a.No., Job No., etc.Type Code Symbol Stamp Authorization No Expl'ation Date Quality Group A'((o'*"""-"l"'b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter, 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component PIPING RCS Name of Manufacturer CANtE ROt<IRON WORKS Monufactu er Serial No.NA National B~d No.na Other IdenNlcation Yotr Built R cpal'ed, Replaced, or Replacement EST.1970 PEPAI RED ASME Code Stamped (Yes or No tl0 D t f w k A GOUGE APPROX 3/32'EEP X 1 3/4" LOtlG)LOCATED ON Il'lTERtlEDIATE RCS LOOP C Itl THE VICItlITY OF BPAtlCH COI'lNECTIOtl FOR VALVE 3-509 WAS REPAIR WELDED ALSO PRIOR TO WELD REPAIR A LINEAR INDICATION ADJACENT TO THE GOUGE llAS REPAIRED BY SUPERFICAL MAtlD FILIllG At~.T.ACCEPTS(.8.Tests Conducted:

Hydrostatic

~Pneumatic~Nominal Operating Pressure.Other*P,e,su,e 2 280 psi Test Temp.547 Degree's F*PERFORh)ED RCS OVER PRESSURE TEST Itl ACCORDAtlCE llITM OP 1004.1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X'.1 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-070-3 FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel.

hpp5coble Monufocturw'e Data Reports to be attached ALL WELDI1lG PERFOR11ED I1<ACCORDA1lCE WITH FP 5 L WELD CO1ITROL 1IAt(UAL Al'(D SITE PROCEOUR S CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.R A repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A J.QJMQ/ESE'4 sir~erusr surs..New Owner or OwneCs Designee, Title Expiration Date N A 7, CERTIFlCATE OF INSERVICE INSPECTlON I, the undersigned, holding a valid commission

'Issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have lnspe ed the c mponents described in this Owner's Report during the period 1'5'o r5'9 i and state that to the best of my kn ledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificote neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspectar nor his erriployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Da e Sltlnatun 19~'actory Mutual System Commissions N I National Boont, State, Province, ond&donomonte Page]of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPIACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 NOVEMBER Io 1991 Sheet of 1 1 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Unit CITO:30031S PS"91-787 8 8-91-0655 Repoi Orttontmtlon PA).No., Job tto.s etc.3.Work Performed by Type Code Symbol Stamp Authorization No 0 321 ORIDA Expiration Date~Id nt.f cation of System OM'ONENT COOL'"G"'ATER Quality Group C.re~>>'*"" (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacttrer Manufacttror Sorktl No.National Bard No.Othe Idontlttc ation Yocr Built Ropa red, Replaced, or Replacement ASME Code Stampod (Yee or No PIPIT lG CClt NA NA NA SUPPORT ST.970 REPLACEt1ENT ND 7 D pt f'w k ITEM 1 OF SUPPORT l(AS REPLACED l(I TH A NE'h ITEM 1 8.Tests Conducted:

Hydrostatic Pneumatic ttominol Operating Pressure Other NAPressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered ond the number of sheets is recorded at the top of this form.91-071-3 FORM NIS-2 (Back)Page 2 of 2 9 Remarks Examinations performed by FPL Construction Quality Control personnel, hpplkable Manufacturer'e Data Reporte to be attache4 ALL ilELDIHG PERFOR,"1ED Ill ACCORDANCE llITH FP rmi L ilELD CONTROL MANUAL SITE PROCEDURES CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this~REPLACEMENT to the rules of the ASME Code,Section XI.repa r or rep acemen conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N A J.h Qcw'me stgnod W I rr M.sirE ciiuu s'4c Owner or OwneCs Designee, Title Expiration Date ,.~IJ., 27 CERTIFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and.the State or Province of Dade Coun Florida and employed by Arkwrl ht Mutual Insurance Com n of have in cte th components described in this Owner's Report during the period to and state that to the best of my kn ledge and belief, the Owner has performed examinations and taken corrective measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspectar nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damag or a loss of any kind arising from or connected with this inspection.

Dat e Signature Factory Mutual System Commissions N I National Board, State, Province, and Endoreemente

'Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 3.Work Performed by P,O.BOX 3218 ORIDA C 33034 4.Mentification of System REAC 0 C Af T WOVEMBER 20, 1991 Sheet of 1 1 Unit CWO:300161 MPIL: 91-476M PC M 90-381 R<<p<<tr Organtmthn p.a.Nch, Job No.,<<tc.Type Code Symbol Stamp Authorization No Expiration Date Quality Group (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification af Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturctr Serial No.National Bocrd No.Other IdontNcatlon Yea Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No PIPING RCS HA NA EST.3-RCH-27 1970 REPLACEMENT tio 7 Description of Work REPLACED SUPPORT ITEM86 3/4" ALL THREAD ROD WITH A HEW ITEMIQI6 (3/4n ALL THREAD ROD)8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Pressure Other ttA Pressure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.~~~X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-073-3 FORM NIS-2 (Back)Page 2 of 2 Examinations performed by FPL Construction Quality Control personnel.

hpplicobl~Manufacturer's Data Reports to be attached'LL WORK PERFORMED IH ACCORDANCE WITH FPSL APPROVED PROCEDURES CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI, repair or rep acemen conforms Type Code Symbol Stamp N/A Expiration Date N A Date)0t 8N88C-Z7, 19 t//Signed Owner or Owner's Designee, Title Certificate of Authorization No.N A A<4 Afe~sr8 SirE WAST'.Sb'CS.P16g.CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province af Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have'ecte the components described in this Owner's Report during the period t sf'/and state that to the best of my kno edge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

In s Siiinatuis 19 SZ Factory Mutual System Commissions N I Nasonol Boord, State, Prcwlnoe, and,Endoisements Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI O FLORIDA POWER dc LIGHT P.O.BOX 029100 MIAMI FL 33152 D t NOVEMBER 20 1991 Sheet 1 of Plant TURKEY POINT P.O.BOX 3088 FLORIDA CITY FL 33034 Un'WO 300 i NCR N 91 0565 IP I L:91-3i5M PS91-755 Repair Oreanhatbn P.O.No..Job No.s etc.3.Work Performed by Type Code Symbol Stamp Authorization No Expration Date P.O.BOX 3218 0 IDA C 33034 4.Identification of System CONTAINMENT SPRAY 5.(a)Applicable Construction Cod 19 Editio (b)Applicable Edition of Section XI Utilized for Repairs or Replacements Quality Group B 1980, Edition, Winter 1981 Addenda 6, Identification of Components Repaired or Replaced and Replacement Components Name af Component Name of Manufacturer Manufacturer Serial Na.National Boa d Na.Other Identification Yeti'uilt Ropa'red, Replaced.or Replacement AS'ode Stamped (Yea ar No PIPING CS NA NA NA 3-RCSH-107 EST.1970 REPLACEMEN NO 7 Description of work REPLACED SUPPORT I TEM 3 i 3" X3"X3 8u ANGLE 5 INST ITEM 3 (3u X 3u X 3/8" ANGLE 8.Tests Conducted:

Hydrostatic Pneumatic Nominal Operating Presume Other NA Pressure psi Test Temp.Degree s F N OTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-072-3 FORM NIS-2 (Back)Page 2 of 2 g Remarks Examinations performed by FPL Construction Quality Control personnel, AppkoQe Monutoctrrrer's Data Reports to be attactre4 ALL WELDIlrG PERFORMED IN ACCORDANCE WITH THE FP8L WELD COt(TROL tQNUAL AND SITE PROCEDURES CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.repair or rep acemen conforms Type Code Symbol Stamp N/A Certificote of Authorization No.N A Air'.NAZIS.'sggSC.

Signed II/arm War.~m.WeA Owner or Orirner's Designee, Title Expiration Date N A Date p'~>Sea Z7, ig+I CERTIRCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Coun Florida and employed by Arkwri ht Mutual Insurance Com n of Norwood MA.have in cte th omponents described in this Owner's Report during the period to and state that to the best of my kno edge and belief.the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Factory Mutual System Commissions N I 1 s Signatrrre Hat!onct Boarrt, State.Prcwfnce.angi Endorsernents D~~~19~&

Page1of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI FLORIDA P WER 8 IG NOVEMBER 21, 1991 Date P.O.BOX 029100 MIAMI FL 3 152 Address Plant TURKEY POINT Sheet Unit of"P.O.BOX 3088 FLORIDA CITY FL 33034 CWO: 300085, MPIL'S 90402M, 005M, PC/M 86-237 Address 3.Work Performed by Neme Repair Oreenizedon P.O.No., Job Na, etc.Type Code Symbol Stamp Authorization No.Expiration Date N/A N/A Address COMPONENT COOUNG WATER Quality Group C 5.(a)Applicable Construction Code 19 55 Edition, N/A Addenda, (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.IdentTiication of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Slam ped (esor No)PIPING CCW PIPING CCW DRESSER INDUSTRIES, INC.TH-18073 RV-3-1424 EST 1970 RV-3-1424 1988 REPLACED REPLACEME PIPING CCW NA RV-3-1425 EST 1970 REPLACED PIPING CCW DRESSER INDLISTRIES, INC.TH-18074 RV-3-1425 1988 REPLACEME PIPING CCW NA RV-3-1426 EST 1970 REPLACED PIPING CCW DRESSER INDUSTRIES, INC.TH-18075 NA RV-3-1426 1988 REPLACEME PIPING CCW RV-3-1 427 EST 1970 REPLACED VALVES RV-3-1424, 1425, 1426, 1427, 1428, 1429, 1430, 1431 WERE REPLACED WITH 7.Description of Work NEW VALVES ALSO.8.Tests Conducted:

Hydrostatic X Pneumatic Nominal Operating Pressure Other Pressure 165 psl Test Temp AMBI E Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-074-3 FORM HIS-2 (Back)Page 2 of 2 9.Remarks Examinations performed by FPL Construction Quality Control personnel.

Applicabh Manufacturer's Data Reports to be attached ALL WELDING PERFORMED IN ACCORDANCE WITH THE FPL WELD CONTROL MANUAL AND SITE PROC EDURES.CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.REPLACEMENT repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Dye h!<4u>am.77,<9%i CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of'ade Coun Florida and employed by Arkwri ht Mutual Insurance Com an of Norwood MA have'p ct thecomponentsdescribedinthisOwner's Reportduringtheperiod

/to r 5'9 , and state that to the best of my knowl ge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Da lns r's Signature ig~r Factory Mutual System Commissions National Board, State, Provinoe, and Endorseinents FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.Owner Rl APOW I NOVEMBER 21, 1991 Date Sheet of 2.Plant Name P.O.BOX 3088 FLORIDA CITY FL 33034 Address Unit CWO: 300085, PC/M 86-237, MPIL'S 91-002M.91-005M RePair Oresnizaron P.O.No.~Job Noeto.3.Work Performed by Name Address Type Code Symbol Stamp Authorization No.Expiration Date 4.Identification of System COMPONENT COOLING WATER 5.(a)Applicable Construction Code 19 55 Edition, N/Addenda, N/A Code Case (b)Applicable Edition of Section XI Nilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Name of Manufacturer Manufacturer Serial No.National Board No.Other Identilcation Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes or No PIPING CCW DRESSER INDUSTRIES, INC.TH-18076 RV4.1427 1988 REPLACEMENT PIPING CCW RV4-1428 EST 1970 REPLACED PIPING CCW DRESSER INDUSTRIES, INC.TH-18077 RV-3-1428 1988 REPLACEMENT PIPING CCW RV-3-1429 EST 1970 REPLACED PIPING CCW DRESSER INDUSTRIES, INC.TH-18078 RV-3-1429 1988 REPLACEMENT NO PIPING CCW NA RV-3-1430 EST 1970 REPLACED NO PIPING CCW DRESSER INDUSTRIES, INC.TH-18086 RV-3-1430 1988 REPLACEMENT PIPING CCW NA RV4-1431 EST 1970 REPLACED NO PIPING CCW DRESSER INDUSTRIES, INC.TH-18087 NA RV4.1431 1988 REPLACEMENT NO THE NEW VALVES ARE FLANGED CONNECTION VALVES.MODIFIED THE 1 1/21 PIPING 7.Description of Work TO FACILITATE THE INSTALLATION OF THE FLANGED CONNECTIONS.

9'I-074-3

Page 1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by/ha Provisions of tho ASME Code Section XI 0FLORIDA POWER 8c LIGHT P.O.BOX 029100 MIAMI FL 33152 Dote NOVEMBER p 1 Shoot oi Plant TURKEY POINT P.O.BOX 3088 FLORIDA CIIY FL 33034 Unit CWOc300127 PC M 90-055 MPZL 90-282M Ropot Rttontcotton p.a.No..Job No etc.3.Work Performed by Type Code Symbol Stamp Authorization No Expiration Date hddt ooo 4.Identification of System CVCS CHARGING tu LETDO~Quality Group B (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repared or Replaced and Replacement Components Name of Component Name of Manufacturer Llanufoctuar Sorloi No.Notional Board No.Othe'dentlnc ation Yocr Buflt Repaired.Replaced.or Replacement PIPING CVCS PiPING CVCS PIPING CVCS NA NA NA NA NA NA NA NA CHARGING PUMP 3A RGI PUMP 3B CHARGI PUMP3C EST.1970 EST.1970 1970 REPLACEMENT NO REPLACEhtENT NO REPLACEl IENT NO 7 Descri tion of'Work MODIFIED CHARGING PUMP S 3A p 3B p 3C DISCHARGE DRAINS p RELIEF VALVE P I p AND SUPPORTS.8.Tests Conducted:

Hydrostatic X Pneumatic Nominol Operating Pressure Other 91 0 Prcssure psi Test Temp.Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded ot the top of this form.91-076-3 FORM NIB-2 (Back)Page 2 of 2 g Remarks Examinations performed by FPL Construction Quality Control personnel.

Appitcobto Ilanirfocbrreh Doto Reports to bo attached ALL WELDING PERFORMED IN ACCORDANCE WITH FPGL WELD CONTROL MANUAL AND SITE PROCEDURES CERTIFICATE OF COMPUANCE Wo certify that the statements mado in tho report aro correct and this~LA conforms to the rules of the ASME Code,Section XI, repair or rep acomen Type Code Symbol Stamp N/A Certificote of Authorization No.N A+~J.Neuu~Signed SnZ CcuST.StrCS.NM-Ownor or Owner's Designee, Title Expiration Date cate 4irnnaca.27,>g>I CERTIFICATE OF INSERYICE INSPECTlON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and tho Stato or Pierince of Arkw ht Mutual Inmranco Com n Dado Coun Florida and omptoyed by havo inspected the components doscribed In this Owner's Report dulbg the period to and state that to tho best of my ledge and belief, the Owner has performed examinations and taken corroctivo measures described in this OwneCs Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither tho Inspector nor his employor makes any warranty, oxpressed or implied, concerning the examinations and corrective measures descnbed in this Owners Report.Futhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Da In, o SIgnatmo 19~Commissions Factory Mutual System'230 National Board, State.Pnrrtnco, ond Endoinernonts Page1 of 2 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.Owner FLORIDA POWER&LIGHT Name Date December 3, 1991 P.O.BOX 029100 MIAMI FL 33152 Address Plant TURKEY POINT Name P.O.BOX 3088 FLORIDA CITY FL 33034 Address 3.Work Performed by Name Address Sheet of Unit CWO: 500645 N-91-0220 Repair Organization P.O.No..Job No., etc.Type Code Symbol Stamp Authorization No.Expiration Date N/A 4.Identification of System SAFETY INJECTION Quality Group B 5.(a)Applicable Construction Code~19 55 Edition, A Addenda, N/A Code Case (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1980, Edition, Winter 1981 Addenda 6.Identification of Components Repaired or Replaced and Replacement Components Name of Component Piping SIS Name of Manufacturer N/A Manufacturer Serial No.N/A.National Board No.N/A Other Identification Line¹10"-SI-151R Year Built Est.1970 Repaired, Replaced, Stamped or Replacement (Yes or No)Replacement No Replacement of a piping section that was discovered leaking during a scheduled Hydrostatic Test u stream of Valve 3-887 8.Tests Conducted:

Hydrostatic X Pneumatic Nominal Operating Pressure Other Pressure 250 psl Test Temp.60 Degree's F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)size is 8 1/2 in.X 11 in., (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.91-077-3

~FORM NIS-2 (Back)Page 2 of 2 9.Remarks Examinations performed by FPL Construction Quality Control personnel.

Applicable Manufacturer's Data Reports to be attached ALL WELDING PERFORMED IN ACCORDANCE WITH THE FPL WELD CONTROL MANUAL AND SITE PROCEDURES.

CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this to the rules of the ASME Code,Section XI.REPLACEMENT repair or replacement conforms Type Code Symbol Stamp N/A Certificate of Authorization No.N/A Expiration Date N/A Signed Owner or Owner's Designee, Title Date~,19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Dade Count Florida and employed by Arkwri ht Mutual Insurance Com an of Norwo d MA have'ected the components described in this Owner's Report during the perio 5'5'to , and state that to the best of nowledge and belief,'he Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.By signing this certificate neither the inspector nor his employer makes any warranty.expressed or implied, concerning the examinations and corrective measures described in this Owners Report.Futhermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Ins tor's tgnature Date~~+19~7 missions Factory Mutual System 8230 National Board, State, Province, and Endorsements