ML18087A748: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 65: | Line 65: | ||
Order cards shall not be used as a document of record to: AP-10 6.2.l Verify completion of .tasks requiring data; to show compliance with regulatory requirements. | Order cards shall not be used as a document of record to: AP-10 6.2.l Verify completion of .tasks requiring data; to show compliance with regulatory requirements. | ||
A completed procedure, check-off sheet or data sheet shall be retained in .accordance with AP-11, Record Retention Program. Retention of I.O. cards issued for these requirements is optional. | A completed procedure, check-off sheet or data sheet shall be retained in .accordance with AP-11, Record Retention Program. Retention of I.O. cards issued for these requirements is optional. | ||
: 6. 2. 2 Verify calibrat_ion of instruments and controls. | : 6. 2. 2 Verify calibrat_ion of instruments and controls. | ||
Instrument Calibration Data Cards (.ICD) or other means of _documenting instrument calibrations are required. | Instrument Calibration Data Cards (.ICD) or other means of _documenting instrument calibrations are required. | ||
Retention of I.O. cards issued for these requirements is optional | Retention of I.O. cards issued for these requirements is optional | ||
* Page 4 of 4 .Rev. 4 | * Page 4 of 4 .Rev. 4 | ||
* 1. Initiator 2a. Initiator 2b. Technical Initiator 2c. Technical | * 1. Initiator 2a. Initiator 2b. Technical Initiator 2c. Technical | ||
: 3. :X:nitiator | : 3. :X:nitiator | ||
* 4. Initiator | * 4. Initiator | ||
: 5. Initiator Technical 6a. Initiator 6b. Initiator . 6c. Initiator | : 5. Initiator Technical 6a. Initiator 6b. Initiator . 6c. Initiator | ||
* AP-10 ATTACHMENT l INSTRUCTIONS FOR COMPLETING AN I.O. REQUEST FORM (Form AP-10-1) Departrnent-I&C or Departrnent-I&C pepartrnent-I&C Enter the appropriate number in the block for the type of request. Enter the code number of the department who shall be responsible to perform the work. | * AP-10 ATTACHMENT l INSTRUCTIONS FOR COMPLETING AN I.O. REQUEST FORM (Form AP-10-1) Departrnent-I&C or Departrnent-I&C pepartrnent-I&C Enter the appropriate number in the block for the type of request. Enter the code number of the department who shall be responsible to perform the work. | ||
Line 88: | Line 88: | ||
* NOTE All surveillance orders, i.e., those having an "S" in Box 3, shall be "C" . I -Interval -Orders will be issued on the same frequency after the last completion date (i.e., a monthly order will be issued 31 days after completion of the last one. | * NOTE All surveillance orders, i.e., those having an "S" in Box 3, shall be "C" . I -Interval -Orders will be issued on the same frequency after the last completion date (i.e., a monthly order will be issued 31 days after completion of the last one. | ||
1 of 5 ll,ey. 4 | 1 of 5 ll,ey. 4 | ||
* 6d. Initiator | * 6d. Initiator | ||
: 7. Initiator | : 7. Initiator | ||
: 8. Initiator | : 8. Initiator | ||
: 9. Initiator | : 9. Initiator | ||
: 10. Initiator | : 10. Initiator | ||
: 11. Initiator | : 11. Initiator | ||
: 12. Initiator | : 12. Initiator | ||
* 13. Initiator COMPANY LOCATION Initiator SUBMITTED BY Initiator APPROVED BY Initiator's Department Head | * 13. Initiator COMPANY LOCATION Initiator SUBMITTED BY Initiator APPROVED BY Initiator's Department Head | ||
Line 117: | Line 117: | ||
DUPLICATE COLUMNS I THAU 1. ONLY CAROS HAVING ENTRIES ARE TO BE PUNCHE.0. | DUPLICATE COLUMNS I THAU 1. ONLY CAROS HAVING ENTRIES ARE TO BE PUNCHE.0. | ||
ALL CARDS PUNCHED Will HAVE ITEM©°TYPE OF R(OUEST 0 DUPLICATED IN COLUMN 11. THC CARO NUMBER WILL BE PUNCHED IN COLUMN 70 AS INDICATED lfrf RIGHT MOST Ball. 0 TYPE OF INSPECTION ORDER | ALL CARDS PUNCHED Will HAVE ITEM©°TYPE OF R(OUEST 0 DUPLICATED IN COLUMN 11. THC CARO NUMBER WILL BE PUNCHED IN COLUMN 70 AS INDICATED lfrf RIGHT MOST Ball. 0 TYPE OF INSPECTION ORDER | ||
* SEOUEMCE NUMllU 0 IONUMllER | * SEOUEMCE NUMllU 0 IONUMllER | ||
[3 I I INSPECTION s I SURVEILLANC[ | [3 I I INSPECTION s I SURVEILLANC[ | ||
I I I I I I D INTEGRITY l 1 WBRICATION P£RF DEPT. CHECK DIGIT ENTERS NUMlllE .. W* WORK MEMO 2 5 4 5 8 FOR NEW IO'S. ACCOUNT No. EP-SALU -POI ' I CARD NUMBER [_ COLU .... 70 G UNIT NUMBER I *UNIT I 2 *UPitlT 2 5 *UNIT S 9 Q1CO ... OH RE/JC.Tot? | I I I I I I D INTEGRITY l 1 WBRICATION P£RF DEPT. CHECK DIGIT ENTERS NUMlllE .. W* WORK MEMO 2 5 4 5 8 FOR NEW IO'S. ACCOUNT No. EP-SALU -POI ' I CARD NUMBER [_ COLU .... 70 G UNIT NUMBER I *UNIT I 2 *UPitlT 2 5 *UNIT S 9 Q1CO ... OH RE/JC.Tot? | ||
Line 135: | Line 135: | ||
* I ...... 0 * .2 .3 .4 .!I R>ftM NUMBER __ OF __ TYPE OF REQUEST . I | * I ...... 0 * .2 .3 .4 .!I R>ftM NUMBER __ OF __ TYPE OF REQUEST . I | ||
* NEW INSl'ECTION OR0£11 ** INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM No. EP-SM.II -POI 2 1 CHANG£ 1U AN E*ISTUrfG 1"5PECTI°" ORDER 5. | * NEW INSl'ECTION OR0£11 ** INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM No. EP-SM.II -POI 2 1 CHANG£ 1U AN E*ISTUrfG 1"5PECTI°" ORDER 5. | ||
* DELETION Of AN EXISTING INSP£CTION ORDEll KEYPUNCH INSTRUCTIONS | * DELETION Of AN EXISTING INSP£CTION ORDEll KEYPUNCH INSTRUCTIONS | ||
: DUPLICATE COLUMNS I THAU 1. ONLY CARDS HAVING ENTRIES ARE TO BE PUNCHED. All CARDS PUNCHED '#Ill HAV[ ITUl@'TYP£ Of REQUEST' DUPLICATED IN COLUMN TI. THE CARD NUMBER WILL BE PUNCHED IN COLUMN 1D AS INDICATED IN RIGHT MOST IOX. I CARD NUllBEll l_ COLUMN 70 I I TI . 0 INSPECTION ORDER NUMBER 0 ot:n. CODE PllUIX r.:J I | : DUPLICATE COLUMNS I THAU 1. ONLY CARDS HAVING ENTRIES ARE TO BE PUNCHED. All CARDS PUNCHED '#Ill HAV[ ITUl@'TYP£ Of REQUEST' DUPLICATED IN COLUMN TI. THE CARD NUMBER WILL BE PUNCHED IN COLUMN 1D AS INDICATED IN RIGHT MOST IOX. I CARD NUllBEll l_ COLUMN 70 I I TI . 0 INSPECTION ORDER NUMBER 0 ot:n. CODE PllUIX r.:J I | ||
* OP£RATIONS | * OP£RATIONS | ||
: s. l'EAfQllllAHC[ | : s. l'EAfQllllAHC[ | ||
I HR/RC I t | I HR/RC I t | ||
Line 165: | Line 165: | ||
* t-tEW INSPECTION OROCR | * t-tEW INSPECTION OROCR | ||
* INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM ACCOIMT Mo. EP* SALM -POI 2 1 CHANGE TO AN EXISTING INSPECTION ORDER 3. I 0£LETION Of AH [)USTING INSPf.CTION OROEA ME'l'PUNCH INSTRUCTIONS: | * INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM ACCOIMT Mo. EP* SALM -POI 2 1 CHANGE TO AN EXISTING INSPECTION ORDER 3. I 0£LETION Of AH [)USTING INSPf.CTION OROEA ME'l'PUNCH INSTRUCTIONS: | ||
DUPLICATE COLUMNS I | DUPLICATE COLUMNS I | ||
: 1. ONLY CARDS HAVING ENTRIES ARE TO BE PUNCHED. All CARDS PUNCHED Will HAVE ITEM©'TYPE OF REQUEST' DUPLICATED IN COLUMN 11. THE CARO NUMBER Will OE PUNCHED IN COLUMN 10 AS INDICATED IN RIGHT MOST BOX I CARO NUMBER I COLUMN 10 I I TI 0 INSPECTION ORDER NUMBER 0 DEPT. COOE PREFIX I | : 1. ONLY CARDS HAVING ENTRIES ARE TO BE PUNCHED. All CARDS PUNCHED Will HAVE ITEM©'TYPE OF REQUEST' DUPLICATED IN COLUMN 11. THE CARO NUMBER Will OE PUNCHED IN COLUMN 10 AS INDICATED IN RIGHT MOST BOX I CARO NUMBER I COLUMN 10 I I TI 0 INSPECTION ORDER NUMBER 0 DEPT. COOE PREFIX I | ||
* OPERATIONS 5 | * OPERATIONS 5 | ||
* PERFORMANCE I | * PERFORMANCE I | ||
I 2 *MAINTENANCE 6* QUALITY ASSURANCE 3* SAFETY f 1 O..ERICAL OFFIC{ 4* PERfORMANCE (lfC) 11!1* CHIEF ENGINEER 9* TRAINING *SEQUENCE NUMBER 0 D PERF DEPT. ENTERS NUMBER 2 3 4 5 6 FOf! NEW !O'S. 0 TYPE OF INSPECTION ORDER 0 UNIT NUMBER D I s INSPECTION D I *UNIT I S *SURVEILLANCE | I 2 *MAINTENANCE 6* QUALITY ASSURANCE 3* SAFETY f 1 O..ERICAL OFFIC{ 4* PERfORMANCE (lfC) 11!1* CHIEF ENGINEER 9* TRAINING *SEQUENCE NUMBER 0 D PERF DEPT. ENTERS NUMBER 2 3 4 5 6 FOf! NEW !O'S. 0 TYPE OF INSPECTION ORDER 0 UNIT NUMBER D I s INSPECTION D I *UNIT I S *SURVEILLANCE | ||
:l*UNIT 2 INTEGRITY l | :l*UNIT 2 INTEGRITY l | ||
* LUBRICATION 5 *U"'IT 3 CHECK DIGIT 9 W 1 W()qt( MEMO O*CQM1ilON 0 SYSTEM 0 TO BE ISSUED EVERY: 0*No OF UNITS G) UNITS © ON TH£ llASIS OF : | * LUBRICATION 5 *U"'IT 3 CHECK DIGIT 9 W 1 W()qt( MEMO O*CQM1ilON 0 SYSTEM 0 TO BE ISSUED EVERY: 0*No OF UNITS G) UNITS © ON TH£ llASIS OF : |
Revision as of 18:09, 25 April 2019
ML18087A748 | |
Person / Time | |
---|---|
Site: | Salem ![]() |
Issue date: | 02/05/1982 |
From: | Public Service Enterprise Group |
To: | |
Shared Package | |
ML18087A720 | List:
|
References | |
AP-10, NUDOCS 8303160618 | |
Download: ML18087A748 (12) | |
Text
ADMINISTRATIVE PROCEDURE NO. 10 REVISION NO. 4 INSPECTION ORDER PROGRAM
-830314 --PDR ADOCK 05000272 S PDR I Form AP-l-l 11.P-l SET NO. ________ _ J Rey. ll TABLE OF CONTENTS SECTION TITLE PAGE 1. 0 PURPOSE 1 2.0 SCOPE 1 3.0 RESPONSIBILITIES.
1 4. o* IMPLEMENTATION 2 s.o SYSTEM REPORTS 3 6.0 RECORDS 4 Attachment 1 Instructions for Completing an I.O. Request Form Attachment 2 Determination of I.O. Tasks When Computer is Inoperable
- AP-10 i Rey. 4
- * \
- ADMINISTRATIVE PROCEDURES SALEM GENERATING STATION ADMINISTRATIVE PROCEDURE NO. 10 INSPECTION ORDER PROGRAM 1.0 PURPOSE This proc;:edure describes the program to provide timely notification to departments of required tasks of a recurring nature, including:
inspections, surveillance and preventative maintenance.
2.0 SCOPE
2.1 The Inspection Order (I.O.) System shall inform the responsible department of the details of the particular task (i.e., procedure .number, tolerance for completion, etc.) 2.2 The I.O. System shall provide the station management with a list of outstanding and overdue inspection orders. 3.0 RESPONSIBILITIES ,AP-10 3.1 The Technical Department (I&C) shall maintain the I.O. System and shall: 3.1.l Enter I.O. requests into the computer file*. 3 .1.2 Issue the I.O. cards to the department head.
- a) The I.O.'s for il Unit shall be printed on blue cards, #2 Unit on yellow cards and all others on white cards. 3.1.3 Update the computer as completed I.O. cards are returned.
3.1.4 Inform
station management of overdue inspection orders once per week. 3.1.5 Take the necessary action to enable station personnel to perform tasks pursuant to regulatory requirements (i.e., those items having an entry in Box 12 of Form AP-10-l} when the computer is inoperable (see Section 4.4). 3.2 Departments utilizing the I.O. system shall: 3.2.1 Execute the tasks and return the I.O. cards to the Technical Department (I&C) immediately upon completion.
3.2.2 Request
new orders or revisions to existing orders as needed . 3.2.3 Insure proper record retention per Section 6.0.
t of 4 Rev. 4
- * ** 4.0 IMPLEMENTATION
- u>-10 4.1. Initiation
4.1.1 Department
supervisors shall request I.O. cards by filling out the Inspection*
Order Request Form (AP-10-1) legibly, accurately and completely (see Attachment 1 for instructions and samples).
4.1.2 The department head or his designee shall approve the request and forward it to the Senior Technical Supervisor (I&C). NOTE A supervisor of one department may submit an I.O. request for an activity to be performed by another department provided he has the written approval of the department head who shall be responsible for performing the task. 4.1.3 The Technical Department (I&C) shall assign the request a unique number and take the necessary action to enter it into the computer file. 4.2 Completion 4.2.l Once each week the Technical Department (I&C) shall call out from the computer all of the order cards due for the following week, an outstanding list and an overdue list. The order cards and the overdue and outstanding list shall be forwarded to each responsible department head by Friday. NOTE The overdue and outstanding lists shall be forwarded to the Station Quality Assurance Engineer and General Manager -Salem Operations.
4.2.2 The department head shall: al Forward the new I.O. cards to their responsible supervisors for completion .
- bl Be responsible for investigating overdue orders and for taking appropriate action. 4.2.3 The cognizant supervisor and the person completing the work shall: al Sign and date copy 2, signifying that requirements have been satisfactorily completed, and return it to the Senior Technical Supervisor (I&C) for computer updating
- bl If required by Section 6.1, sign and date copy 1 and retain in departmental file. Page 2 of 4 4 I
- *
- 4.3 Revisions Revisions to existing orders shall be made using the Inspection Order Request Form and are subject to the same review and approval requirements as the original inspection order. Only the I.O. number, unit number and the information to be revised need be entered on the request form. 4.4 Notification
-Computer Inoperable If the cards for the new period are not issued by Friday, the following steps shall .*.I be taken: 4.4.1 Department heads shall be notified in writing by the Technical Manager that the \ I.O. system is not operational.
4.4.2 Each department shall determine what I.O.'s are outstanding and when they are due using the last outstanding list. 4.4.3 Each department shall use the dates on the current summary list to determine what tasks should be completed during the next week (see Attachment 2 for instructions).
4.4.4 A record of all I.O. 's completed shall be maintained to update the computer records when the system is restored.
5.0 SYSTEM
REPORTS The following is a description of the computer reports available upon request from the Senior Technical Supervisor (I&C). The reports include all information on the Inspection Order Request Form, as well as the next issue date, due date and the last completion date. AP-10 5.1 Inspection Order summary Report This report provides a numerical listing of all inspection orders presently in the computer file. 5.2 Inspection Order System Summary Report This report gives the same information as 5.1 except the orders are listed by System Code rather than numerical (i.e., all orders performed on the Reactor Coolant System are listed together).
5.3 Inspection
Order Outstanding Report This report lists only the orders that are outstanding at the time of report issue . 5.4 Inspection Order overdue Report This report lists only the orders that are overdue at the time of report issue. Rev. 4
- *
- NOTE The outstanding and overdue reports are issued weekly per Section 4.2.1. 5.5 Inspection Order Forecast Report This report lists by Inspection Order number the orpers to be issued for some specified period of time in the future. The report may be used as a planning tool. The report may include any frequency of issue (i.e., all I.O.'s with frequency of issue greater than one month or all I.O. 's to be issued prior to the next refueling outage)
- 6.0 RECORDS 6.1 Inspection Order cards used to document the completion of tasks where no data sheet or procedure check-off sheet exists (i.e., annual reviews of manuals or procedures by department heads or lubrication of pumps and valves), shall be maintained by the department completing them for five years. The cards shall be filed numerically.
6.2 Inspection
Order cards shall not be used as a document of record to: AP-10 6.2.l Verify completion of .tasks requiring data; to show compliance with regulatory requirements.
A completed procedure, check-off sheet or data sheet shall be retained in .accordance with AP-11, Record Retention Program. Retention of I.O. cards issued for these requirements is optional.
- 6. 2. 2 Verify calibrat_ion of instruments and controls.
Instrument Calibration Data Cards (.ICD) or other means of _documenting instrument calibrations are required.
Retention of I.O. cards issued for these requirements is optional
- Page 4 of 4 .Rev. 4
- 1. Initiator 2a. Initiator 2b. Technical Initiator 2c. Technical
- 3. :X:nitiator
- 4. Initiator
- 5. Initiator Technical 6a. Initiator 6b. Initiator . 6c. Initiator
- AP-10 ATTACHMENT l INSTRUCTIONS FOR COMPLETING AN I.O. REQUEST FORM (Form AP-10-1) Departrnent-I&C or Departrnent-I&C pepartrnent-I&C Enter the appropriate number in the block for the type of request. Enter the code number of the department who shall be responsible to perform the work.
- For new I.O. 's the Technical Department-I&C shall assign a number to the I.O. then enter it on the form. For revisions to or deletions of existing I.O.'s enter the numbers starting at the right (I.O. #400372 would be 00372). Enter check digit in accordance with departmental procedure.
Enter code for type of I.O. being requested.
The types of I.O.'s available are: I Inspection; To order work required by department or Station Procedures.
overdue notification is provided.
s surveillance; To order work required by regulatory agencies (i.e., N.R;C., D.R.B.C., etc.). Overdue notification is provided.
If "S" is chosen, 6c shall be "C" and Item 12 shall be completed . L Lubrication; To order lubrication of plant equipment in accordance with the Station Lubrication Manual. overdue notification is provided.
W Work Memo; To order work where no overdue tion is desired. Designate on which unit the I.O. is to be performed.
If identical tasks are to be performed on more than one unit, separate request forms for each unit are required.
Print the name of the system to which the equipment (item 13) belongs on the two lines provided.
Enter the numerical code for the system into the 4 boxes. Enter the number of units selected in 6b between issues of this inspection order. For example, if 6b is days and you enter 31 for 6a, card will be issued every 31 days. Specify the unit interval for the I.O. in conjunction with 6a. Enter the code for the appropriate basis for issuance.
The available bases are: C -Calendar -Orders will be issued on the same frequency each time regardless of completion date (_i.e., every 30 days.l
- NOTE All surveillance orders, i.e., those having an "S" in Box 3, shall be "C" . I -Interval -Orders will be issued on the same frequency after the last completion date (i.e., a monthly order will be issued 31 days after completion of the last one.
1 of 5 ll,ey. 4
- 6d. Initiator
- 7. Initiator
- 8. Initiator
- 9. Initiator
- 10. Initiator
- 11. Initiator
- 12. Initiator
- 13. Initiator COMPANY LOCATION Initiator SUBMITTED BY Initiator APPROVED BY Initiator's Department Head
- AP-10 Specify the number of days after the order has been issued that will become overdue. Mark N.A. for work memo's. Optional -Estimate the total manhours required to complete the task. This estimate will be printed only on the summary lists to be used for planning purposes.
Specify if the I.O. task requires an outage to perform. For inspection orders that can only be accomplished with the plant in a shutdown condition, a scheduled outage should be designated.
Orders required to be done during refueling outages should be designated refueling.
- This will allow designated outage requirements to be pulled from the computer in a single program call out. Orders will also appear on routine callout if their issue dates fall due. New requests only, designate the first date the order should be issued. This will key the computer to dates to issue the order (i.e., if the first issue date is 12/5/78 and the order is monthly, the order will be issued on 12/5/78 and every 31 days thereafter)
- If the I.O. request is a mode dependent Technical tion requirement place an "X" in the box for each mode the surveillance is required.
For all non-mode dependent I.O. requests leave the boxes blank. Specify the procedure which will be used to perform the task. only one procedure should be used. Specify the applicable agency, the document and section that requires this task to be performed.
This section shall be completed for all inspections, maintenance actions, tests, etc., which are performed to comply with Federal, State, NRC, NJDEP, DRBC, Insurance and QA Program requirements.
All request forms having an entry in this section shall be Surveillance Orders (i.e., an "S" shall be. entered in box 3, form AP-10-1)
- Specify the piece .of equipment or type of equipment (i.e., Ill Safety Injection Pump, or Safety Injection Pumps). Describe the task to be performed (i.e., Perform Channel Functional Test on Loop lPT-516)
- Any other information desired should be added in this section, space permitting.
Enter Salem Sign and date request Sign and date request Attachment 1 Page 2 of 5 Rev. 4 I ...... 0 ""* * .2 .3 .4 .5 FORM NUMBER __ OF __ _ TYPE OF REQUEST I 1 NEW INSPECTION 0 3.
- 0£LETtOH Of AN EXISTING INSPECTtON ORDER Z : CHANGE TO AN EXISTING llJrtSPECTIO,.
ORDER 71 0 INSPECTION ORDER NUMBER 0 D£PT. CODE PREFIX l?l I
- OPERATIOOIS 5
- PERFOllMAHCE I Hll/ftC J 2
- MAINT[NANC£
- QUALITY ASSURANCE 5* SAFETY 11 Q.[RICAl.
OFFICE 4* PERFORIUHCE (It CJ 8* CHIEF ElfOIHEER 9* ntAININO SYSTEM
- INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM INSTRUCTIONS:
DUPLICATE COLUMNS I THAU 1. ONLY CAROS HAVING ENTRIES ARE TO BE PUNCHE.0.
ALL CARDS PUNCHED Will HAVE ITEM©°TYPE OF R(OUEST 0 DUPLICATED IN COLUMN 11. THC CARO NUMBER WILL BE PUNCHED IN COLUMN 70 AS INDICATED lfrf RIGHT MOST Ball. 0 TYPE OF INSPECTION ORDER
- SEOUEMCE NUMllU 0 IONUMllER
[3 I I INSPECTION s I SURVEILLANC[
I I I I I I D INTEGRITY l 1 WBRICATION P£RF DEPT. CHECK DIGIT ENTERS NUMlllE .. W* WORK MEMO 2 5 4 5 8 FOR NEW IO'S. ACCOUNT No. EP-SALU -POI ' I CARD NUMBER [_ COLU .... 70 G UNIT NUMBER I *UNIT I 2 *UPitlT 2 5 *UNIT S 9 Q1CO ... OH RE/JC.Tot?
11111 0 TO BE ISSUED EVERY: 0*No OF UNITS . G) ..!!!!'!!__
ON Tl'E BASIS f7 : 0* AND AFTEft 10 II IZ 13 (COO[ ENTERED UY PERFORMANCE DEPT. J M*EsTIMATED
\.!.__) TASK MANHOURS (;;\OUTAGE
\::J REQUIREMENT Z2 23 fL1 5
- SCHEDULED ..
- REFUELING 24 N
- 17 0
- DAYS M
- MONTHS y I YEARS 18 c I (CALENDAR)
FROM LAST ISSUE I I I INTEFNAL J FROM LAST COMPLETIOfl 19 20 21 FROM ISSUE 0* FIRST ISSUE DATE rj()\ SURVEILLANCE V MODES PROCEDURE NUMBER I 4 1111111 blqlz@ 111 26 Z1 28 29 3() 31 32 33 34 35 !ii 37 38 39 40 41 42 43 44 46 47 48 49 '° *USE RIGlfT MOST COl.Utolfl FlftST -FILL IN Ill.INKS WITH ZEROS -lo. 2 M'r.I WOULD BE WRITTEN IN Sd AS 002 Pl.ACE "x" IN APPLICABlE MODE BOXIESI @ REGULATORY REQUIREMENT . SPECIFY DOCUMENT ANO SECTION NUMBER [!oft SURVEILLANCE Io's ONLY] V\i .( ll t/' 3, z ; ill I b. ('.. @ LIST EQUIPMENT FOi.LOWED BY A SLASH (/J F'OLLOWED DY THE TASK DESCRIPTION NOTES: DO NOT SPLIT WORDS BETWEEN LINES UNLESS ABSOLUTELY REOUIRED.
USE A 5""CE FOR PtmCTUATION ANO ALLOW A SPACE FOft BLANKS BETWEEN WORDS. CMSTINGUISH BETWEEN LETTERS ANO NUMBERS: 9,I
- LETTERS i 0, l
- NUMBERS I vtW1F'I IEIH!. fl TI OlN I COMPANY LOCATION 10 AP-tO f'OMI Al'-10-1 REV. 2: SUBMITTED BY _ AWROVEO BY REVIEWED f'OR CORRECT FOR'-IAT PERF DEPT (INITIAL J
- I ...... 0 * .2 .3 .4 .!I R>ftM NUMBER __ OF __ TYPE OF REQUEST . I
- NEW INSl'ECTION OR0£11 ** INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM No. EP-SM.II -POI 2 1 CHANG£ 1U AN E*ISTUrfG 1"5PECTI°" ORDER 5.
- DELETION Of AN EXISTING INSP£CTION ORDEll KEYPUNCH INSTRUCTIONS
- DUPLICATE COLUMNS I THAU 1. ONLY CARDS HAVING ENTRIES ARE TO BE PUNCHED. All CARDS PUNCHED '#Ill HAV[ ITUl@'TYP£ Of REQUEST' DUPLICATED IN COLUMN TI. THE CARD NUMBER WILL BE PUNCHED IN COLUMN 1D AS INDICATED IN RIGHT MOST IOX. I CARD NUllBEll l_ COLUMN 70 I I TI . 0 INSPECTION ORDER NUMBER 0 ot:n. CODE PllUIX r.:J I
- OP£RATIONS
- s. l'EAfQllllAHC[
I HR/RC I t
- 11a1NTENANC£
- au.lurv ASSURANCE
!* SAJ"ETY 1
- Q.ERICAL OFFICE 4
- PEllfOIHIANCE (I f CI I* CHIEF EMOIHEER I I TttAINtNO 0* 5#.QUCNCE HUMBEi! 0 ;DNUMllEll D INTEGRITY PERF. DEPT. CHECK DIGIT ENTERS NUllllt:ll 2 5 4 s s FOR NEW IO*s. 0 TYPE OF INSPECTION ORDER 0 UNIT NUMBER [§ I
- INSPECTION I I UfflT I S
- SURVEILLANCE 2*Utt1T I l
- WBRICATIOH S *UNfT ! 'I W* WORK MEMO 9 O*COWON 0 SYSTEM 0I:o lktJc.:f'oR-Coo1...1111J T 0 TO BE ISSUED EVERY : ©*No Of UNITS 0 ...!!!!!!._
0 ON THE BASIS Of : 0* AND OVERDUE AfTEll 10 11 12 13 I COOE ENTERED BT DEPT.) r:1°ESTIMATEO
\J_) TASK MANHOURS (;;'\OUTAGE
\V REQUIREMENT (g9lJ DI DAYS C * (CALENDAR I FROM LAST ISSUE I
- I INTERVAL I 14 IS 16 17 M *MONTHS Y
- YEARS 18 FROM LAST COllPl.ETION 19 20 21 FROM ISSUE 0* FIRST ISSUE DATE Q SURVEILLANCE l\J MODES z ' 4 s e PROCEDURE NUMBER : :
cr1 rn rn I
111 22 25 24 10 ACCOMPLISH 25 28 27 21 29 so 51 52 55 54 5S 541 J1 58 59 40 41 42 45 44 45 46 47 48 49 so lllGHT MOST COlUllN FIRST -fill IN ILANKS WITH ZEROS -It. 2 DAYS WOULD BE WRITTEN IN 6d AS 002 Pl.ACE .)( .. IN APPLICABl.E MOOE eox (ES) REGULATORY REQUIREMENT SPECIFY DOCUMENT AHO SECTION NUMBER (_,oR SURVEILLANCE ro's ONLY] ,. c.. s-r 1 5 J-1
- J. ,J.. p. ,b. IC ID 20 COMP>\NY 0 ti I LOCATION 2 3 @ LIST [OUIPllENT FOLLOWED IT A SLASH (/I FOLLOWED BT TN[ TASK DESCRIPTION i Afti 21 NOTES: DO NOT SPLIT WOADS BETWEEN LINES UNLESS ABSOLUTELY REQUIRED.
USE A SPllCE FOii PUNCTUATION AND ALLOW A SPACE FOR BLANKS BETWEEN WORDS. DISTINGUISH BETWEEN LETTERS AND NUMllERS:
9, I
- LETTERS I O, I
- NUMBERS II c.
Co (J J.._ Arr.I -r ',p v ,,.. fJ I vE Rt t:[y t= IJ CH l,p " 111 /J l,)"' 0 J: \) 0 J... h'1A Gt fl (Ii /) UnJ O't IF I! EK; i) :1:: It (., l/ ,c. c: {Ii /J 2S 50 55 4U 4> so 5S REVIEWED FO" r-r /;: I IP c: I 1-f (r:> 60 6S o4l 2 3 4 5 6 "' ,_,,_to f°"M "fV.2 DATE lfia 1129 DATE I( / O:J ..L2.!l CORRECT fOftMAT P["f [)[PT. (INITIAL J 1:l 0 c: t'1 en .. , *
- FORM NUMBER __ OF __ _ TYPE OF REQUEST I
- t-tEW INSPECTION OROCR
- INSPECTION ORDER SYSTEM INSPECTION ORDER REQUEST FORM ACCOIMT Mo. EP* SALM -POI 2 1 CHANGE TO AN EXISTING INSPECTION ORDER 3. I 0£LETION Of AH [)USTING INSPf.CTION OROEA ME'l'PUNCH INSTRUCTIONS:
DUPLICATE COLUMNS I
- 1. ONLY CARDS HAVING ENTRIES ARE TO BE PUNCHED. All CARDS PUNCHED Will HAVE ITEM©'TYPE OF REQUEST' DUPLICATED IN COLUMN 11. THE CARO NUMBER Will OE PUNCHED IN COLUMN 10 AS INDICATED IN RIGHT MOST BOX I CARO NUMBER I COLUMN 10 I I TI 0 INSPECTION ORDER NUMBER 0 DEPT. COOE PREFIX I
- OPERATIONS 5
- PERFORMANCE I
I 2 *MAINTENANCE 6* QUALITY ASSURANCE 3* SAFETY f 1 O..ERICAL OFFIC{ 4* PERfORMANCE (lfC) 11!1* CHIEF ENGINEER 9* TRAINING *SEQUENCE NUMBER 0 D PERF DEPT. ENTERS NUMBER 2 3 4 5 6 FOf! NEW !O'S. 0 TYPE OF INSPECTION ORDER 0 UNIT NUMBER D I s INSPECTION D I *UNIT I S *SURVEILLANCE
- l*UNIT 2 INTEGRITY l
- LUBRICATION 5 *U"'IT 3 CHECK DIGIT 9 W 1 W()qt( MEMO O*CQM1ilON 0 SYSTEM 0 TO BE ISSUED EVERY: 0*No OF UNITS G) UNITS © ON TH£ llASIS OF :
I l I l I tO II 12 13 I COOC ENTERED BY PERfORMANCE DEPT.)
\.!__) TASK MANHOURS fn\ OUTAGE V REQUIREMENT ill] .. 16 D 17 0 I DAYS .. I MONTHS y I YEARS D 18 c I I CALENDAR I FROM LAST ISSUE J 1 (INTERVAL)
FROM LAST CQUPLETIOf4 ill] DAYS 19 20 21 FROM ISSUE 0* FIRST ISSUE DATE Ii()\ SURVEILLANCE V MODES PROCEDURE NUMBER I 2 3 8 rn D 9
- SCHEDULED A
- REFUELING N
- OUTAGE NOT REOUIRm DD DODD 111111111111111 22 23 24 TO ACCOMPLISH 2' 26 27 28 29 30 31 32 33 34 3G J1 38 39 40 41 42 43 44 45 46 47 48 49 !() *USE RIGHT MOST COLUMN flRST -FILL IN l!LANKS WITH ZEROS -It. 2 DAYS WOULD llE WRITTEN IN 6d AS 002 PLACE *x" IN APP\.ICABLE MOOE BOX(ES) REGULATORY REQUIREMENT . SPECIFY DOCUMENT ANO SECTIO"t NUMBER [roR SUltVEILLANCE Io's OtfLY] l-+-f-+-+-+-+-+-+-+-+-+-+-+---1.1
.3,_..__.,.__,__,__,.___,_
......
a11-t0 H,,.M AP-10-1 R[V Z 0 LIST EQUIPMENT FOLLOWEO BY A SLASH I/I RlLl.OWED BY THE TASK DESCRIPTION NOTES: 00 NOT SPLIT WOROS BETWEEN LINES UNLESS ABSOLUTELY REOUIREO.
USE A Sl'llCE FOR PUNCTUATION ANO ALLOW A SPACE FOR BLANKS BETWEEN WORDS. lllSTINGUISH BETWEEN LETTERS ANO NUMBrns: 9,l
- LETTERS; 0, I. NUMBERS SUl!MITTEOe*_ DATE l_!_j_o/ 180 "EVICWCO fOflt 60 21 30 40 APPftOVEO ll!IY I ---:-I /".. ----> OAT£/ .!__Lo_ll.
Q_ 0 CORRfC T FORMAT I tf PERF DEPT. I INITIAL I '1, , 11! 2 3 4 !I 6 10
- 1-1 z [I) 'tl hJ () 8 H 0 z 0 t1 :<! t1 (/) M s: t"' 'U M t-4 >-3 M H 0 w z 0 c: M (/) >-3 tn t"' M J
- *
- ATTACHMENT 2 DETERMINATION OF I.O. TASKS WHEN COMPUTER IS INOPERABLE Example 1 A calendar issue I.O. cycle of one month was issued on 790201. When the I.O. is completed the next issue date would be one month from the last issue date or 790301. Example 2 An interval issued I.O. that has a cycle of one month is issued on 790201. When the I.O. is completed, the next issue date would be one month from the completion date. If the completion date was 790215 the next issue would be 790315 . AP-10 Page 1 of 1 4