ML17308A072: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(3 intermediate revisions by the same user not shown)
Line 3: Line 3:
| issue date = 08/12/1982
| issue date = 08/12/1982
| title = Forwards Application for Amend to License DPR-18,revising Tech Specs to Incorporate Radiological Effluent Tech Specs. Change Supersedes 790214 Proposal
| title = Forwards Application for Amend to License DPR-18,revising Tech Specs to Incorporate Radiological Effluent Tech Specs. Change Supersedes 790214 Proposal
| author name = MAIER J E
| author name = Maier J
| author affiliation = ROCHESTER GAS & ELECTRIC CORP.
| author affiliation = ROCHESTER GAS & ELECTRIC CORP.
| addressee name = DENTON H R
| addressee name = Denton H
| addressee affiliation = NRC OFFICE OF NUCLEAR REACTOR REGULATION (NRR)
| addressee affiliation = NRC OFFICE OF NUCLEAR REACTOR REGULATION (NRR)
| docket = 05000244
| docket = 05000244
Line 14: Line 14:
| document type = CORRESPONDENCE-LETTERS, INCOMING CORRESPONDENCE, UTILITY TO NRC
| document type = CORRESPONDENCE-LETTERS, INCOMING CORRESPONDENCE, UTILITY TO NRC
| page count = 625
| page count = 625
| project =
| stage = Request
}}
}}


=Text=
=Text=
{{#Wiki_filter:REGULATOR NFORMA'TION DISTRIBUTION
{{#Wiki_filter:REGULATOR     NFORMA'TION DISTRIBUTION "             TEM {'RIDS)
" TEM{'RIDS)AOCESSION NBR:8208170214 DOC~DATE: 82/08/12 NOTARIZED:,NO OOGKET FACIL:50 244 Robert Emmet Ginna Nuclear Plant~Uni!t ii Rochester G 05000244 AUTH INANE AUTHOR AFFILIATION MAIERi J~E~Rochester Gas E Electric Corp<'RBC IP~NAME RECIPIENT AFFILIATION DENTON,H,RE Office of Nuclear Reactor Regulationg Director SUBJECT;Forwards application for amend to License OPR 18irevising Tech Specs to incorporate radiological effluent'Tech Specs,'han'ge supersedes 790214 propos oe'//rcF DISTRIBUTION CODE: C002B COPIES RECEIVED:LTR 9-ENCL X~SIZE:/+TITLE: Environ.Comments, NOTES:NRR/DL/SEP icy, 05000244 INTERNAL: 'I,/,EXTERNAL:
AOCESSION NBR:8208170214           DOC ~ DATE: 82/08/12           NOTARIZED:,NO                       OOGKET FACIL:50 244 Robert Emmet Ginna Nuclear Plant~ Uni!t                   ii Rochester               G 05000244 AUTH INANE           AUTHOR   AFFILIATION MAIERiJ ~ E ~         Rochester Gas E Electric Corp<
NOTiES'CRS NATL LAB NSIC 21 05 RECIPIENT ID CODE/NAME ORB 45 BC 06 NLe ORNL ELD/HOS4 NRR/DE/AEAB'0 NRR/DE/HGEB
        'RBC IP ~ NAME         RECIPIENT AFFILIATION DENTON,H,RE           Office of Nuclear Reactor Regulationg Director SUBJECT;     Forwards application for amend to License OPR 18irevising Tech Specs to incorporate radiological effluent 'Tech supersedes  790214 propos Specs,'han'ge oe'//rcF DISTRIBUTION CODE: C002B         COPIES RECEIVED:LTR     9       -ENCL X~   SIZE: /+
"'21 NRR/DS I/AEB 19 NRR/DS I/RAB 17 RGN1 COPIES LTTR ENCL 7 7 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 5 5 1 1 1 1 LPOR NRC PDR NTIS 03 02 REC IP IENT'D CODE/NAME ORB e5 LA LYONSiJ~01 NRR NORRI'SgJ NRR/DE/EEB 16 NRR/DE/SAB 18/ETSB 15 REG F IL 04>COPIES LTTR ENCL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 R~t E'w$p~q~~C2l.e~s TOTAL NUMBER OF COPIES REQUIRED: L~TTR 32 ENCL 30  
TITLE: Environ. Comments, NOTES:NRR/DL/SEP       icy,                                                                           05000244 RECIPIENT          COPIES            REC IP IENT'D
~~e
                                                                                    >COPIES ID CODE/NAME         LTTR ENCL          CODE/NAME              LTTR ENCL ORB 45 BC     06     7      7    ORB e5 LA                      1                1 NLe ORNL               1      1    LYONSiJ ~              01      1                1 INTERNAL: ELD/HOS4                   1      0    NRR NORRI'SgJ                  1 NRR/DE/AEAB'0           1      1    NRR/DE/EEB            16      1                1 NRR/DE/HGEB "'21       1      1    NRR/DE/SAB            18      1                1 NRR/DS I/AEB 19         1      1              /ETSB 15              1                1 NRR/DS I/RAB 17         1     1     REG F IL              04      1                 1
///I//I/////
'I, RGN1                    1     1
8K ROCHESTER GAS AND ELECTRIC CORPORATION
/  ,EXTERNAL:                            1     0    LPOR                  03      1                 1 NATL LAB        21      5     5     NRC PDR               02       1                 1 NSIC            05      1     1     NTIS                            1 NOTiES'CRS R~t     E'w$ p~
~89 EAST AVENUE, ROCHESTER, N.Y.14649 JOHN E.MAILER Vice Preskfent TELEPHONE ARE*cooE Tle 546-2700 August 12, 1982 Mr.Harold R.Denton Director Office of Nuclear Reactor Regulation U.S.Nuclear Regulatory Commission Washington, D.C.20555 Re: Rochester Gas and Electric Corporation, R.E.Ginna Nuclear Power Plant, Unit No.1 Docket No.50-244
1      1 q~     ~ C2l.e~s TOTAL NUMBER OF COPIES REQUIRED: L~TTR           32   ENCL           30


==Dear Mr.Denton:==
  ~ ~
Enclosed are: l.Three (3)originals and nineteen (19)copies of an Application for Amendment to Operating License to amend Appendix A of that license to revise Technical Specifications to incorporate radiological effluent specifications.
e
2.Also enclosed are forty (40)copies of documents designated Attachments A and B, which set forth the revised Table and further describe the purposes of the changes made.This change supersedes our previous proposal, dated February 14, 1979, on this subject.Thus, no fee is rec(uired.
Sincerely, 8208i702i 05000244 4 8208i2 PDR ADGCH P
<i~rt/~K~A'-//8~~~5 6'pc~.se-c.W'<~,e~/rz/sE-~ams czar~s/~o/s C3pg Attachment A Revise the Technical Specifications as follows: Remove Table of Contents p 1-2 1-5 p 3.5-1 through 3.5-3 p 3.9-1 through 3.9-7 p 4.1-1 p 4.1-5 through 4.1-7 p 4.10-1 hrough 4.10-5 p 4.12-1 through 4.12-5 p 6.5-10 p 6.8-1 p 6.9-1 through 6.-2 p 6.9-6 through 6.9-3, Insert.Table of Contents p 1-2 p 1-2a p 1-5 p 3.5-1 throug 3.5-3 p 3.5-7 through 3.5-9 p 3.9-1 thrp6gh 3.9-12 p 3.15-1 tlfrough 3.15-8 p 4.1-1 p 4.1-5~through 4.1-7 p 4.1-14 p 4.1/~2 p 4.10-1 through 4.10-5 p 4/12-1 through 4.12-9 p+.5-1 p~6.5-10 6.5-10a p 6.8-1 p.6.8-2 p 6.9-1 through 6.9-3 p 6.9-3a through 6.9-3c p 6.9-6 through 6.9-10 p 6.14-1 p 6.15-1 p 6.15-2


TABLE OF CONTENTS 1.0 DEFINITIONS 2.0 SAFETY LIMITS AND LIMITING SAFETY SYSTEM SETTINGS 2.1 Safety Limit, Reactor Core 2.2 Safety Limit, Reactor Coolant System Pressure 2.3 Limiting Safety Systems Settings, Protective Instrumentation 3.0 LIMITING CONDITIONS FOR OPERATION PacCe 2.1-1 2.1-1 2 k2 1 2~3 1 3.1-1 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 Reactor Coolant System 3.1.1 Operational Components 3.1.2 Heatup and Cooldown 3.1.3 Minimum Conditions for Criticality 3.1.4 Maximum Coolant Activity 3.1.5 Leakage 3.1.6 Maximum Reactor Coolant Oxygen, Fluoride, and Chloride Concentration Chemical and Volume Control System Emergency Core Cooling System Auxiliary Cooling Systems, Air Recirculation Fan Coolers, Containment Spray, and Charcoal Filters Turbine Cycle Instrumentation System Containment System Auxiliary Electrical Systems Refueling Plant Effluents Control Rod and Power Distribution Limits Fuel Handling in the Auxiliary Building Movable In-Core Instrumentation Shock Suppressors (Snubbers)
                /  //I//I/////
Fire Suppression System Radiological Environmental Monitoring 3~1 1 3 0 1 1 3.1-5 3.1-17 3.1-20 3.1-25 3~1 3 1 3~2 1 3~3 1 3.4-1 3.5-1 3.6-1 3~7 1 3.8-1 3.9-1 3.10-1 3.11-1 3.12-1 3.13-1 3.14-1 3.15-1 I
8K ROCHESTER GAS AND ELECTRIC CORPORATION            ~ 89 EAST AVENUE, ROCHESTER, N.Y. 14649 JOHN E. MAILER                                                                TELEPHONE Vice Preskfent                                                        ARE* cooE Tle 546-2700 August 12, 1982 Mr. Harold R. Denton Director Office of Nuclear Reactor Regulation U.S. Nuclear Regulatory Commission Washington, D.C.                     20555 Re:              Rochester  Gas and Electric Corporation, R. E. Ginna Nuclear Power Plant, Unit No. 1 Docket No. 50-244
TABLE OF CONTENTS (cont.)4.0 SURVEILLANCE REQUIREMENTS
~Pa e 4.1-1 4.1 4.2 4.3 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.1S Operational Safety Review Primary Components Tests Primary System Testing Following Opening Containment Tests Safety Injection, Containment Spray and Iodine Removal Systems Tests Emergency Power System Periodic Tests Main Steam Stop Valves Auxiliary Feedwater System Reactivity Anomalies Radiological Environmental Monitoring Spent Fuel Pit Charcoal Adsorber Testing Effluent Surveillance Radioactive Material Source Leakage Test Shock Suppressors (Snubbers)
Fire Suppression System Test 4.1-1 4.2-1 4.3-1 4.4-1 4.5-1 4.6-1 4.7-1 4.8-1 4.9-1 4.10-1 4.11-1 4.12-1 4.13-1 4.14-1 4.15-1 5.0 DESIGN FEATURES 5.1 Site 5.2 Containment, Design Features 5.3 Reactor Design Features S.4 Fuel Storage 5.5 Waste Treatment Systems 6.0 ADMINISTRATIVE CONTROLS 5.1-1 5.2-1 5.3-1 5.4-1 5.5-1 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 Responsibility Organization 6.2.1 Offsite 6.2.2.Facility Staff Station Staff Qualifications Training Review and Audit 6.5.1 Plant Operations Review Committee (PORC)6.5.2 Nuclear Safety Audit and Review Board (NSARB)6.5.3 Quality Assurance Group Reportable Occurrence Action Safety Limit Violation Procedures Reporting Requirements 6.9.1 Routine Reports 6.9.2 Reportable Occurrence 6.9.3 Unique Reporting Requirements Record Retention Radiation Protection Program (Deleted)High Radiation Area Offsite Dose Calculation Manual Major Changes to Radioactive Waste Treatment Systems 6.1-1 6.1-1 6.1-1 6.1-1 6.3-1 6.5-1 6.5-5 6.5-11 6.6-1 6.6-1 6.8-1 6.9-1 6.9-1 6.9-3b 6.9-10 6.10-1 6.11-1 6.13-1 6.14-1 6.15-1


0 eratin Performing all intended functions in the intended manner..De ree of Redundanc Instrument Channels The difference between the number of operable channels and the number of channels which, when tripped, will cause an automatic system trip.Instrument Surveillance Channel Calibration The adjustment, as necessary, of the channel output so that it responds with the necessary range and accuracy to known values of the parameter which the channel moni-tors.The Channel Calibration shall encompass the entire channel including the sensor and alarm and/or trip func-tions, and shall include the Channel Functional Test.The Channel Calibration may be performed by any series of sequential, overlapping or total channel steps so that the entire channel is calibrated.
==Dear Mr. Denton:==
Channel Check The qualitative assessment of channel behavior during operation by observation.
This determination shall in-elude, where possible, comparison of the channel indica-tion and/or status with other indications and/or status derived from independent instrumentation channels measur-ing the same parameter.
1 Channel Functional Test a.Analog channels-the injection of a simulated signal into the channel as close to the sensor as practicable to verify operability including alarm and/or trip funci ions.b.Bistable channels-the injection of a simulated signal into the sensor to verify operability includ-ing alarm and/or trip function.Source Check The qualitative assessment.
of channel response when the channel sensor is exposed to a radioactive source.1-2a I
Fre uenc Notation The frequency notation specified for the performance of surveillance requirements shall correspond to the inter-vals defined below.Notation S, Each Shift D, Daily Twice per week W, Weekly B/W, Biweekly N, Nonthly B/N, Bimonthly Q, Quarterly SA, Semiannually A, Annually R, Refueling N.A.Fre uenc At least once per 12 hours.At least once per 24 hours At least once per 4 days and at least, twice per 7 days At least once per 7 days At least once per 14 days At, least.once per 31 days At least once per 62 days At least once per 92 days At least once per 6 months At least once per 12 months At least once per 18 months Prior to each startup Not Applicable Within 12 hours prior to each release Offsite Dose Calculation Nanual ODCN The ODCN is a manual containing the methodology and parameters to be used for calculating the offsite doses due to liquid and gaseous effluents and in calculation of liquid and gaseous effluent monitoring instrumentation alarm/trip setpoints.
'1-5
~I 3.5 Instrumentation S stem 0 erational Safet Instrumentation 3.5.1 3.5.2 3.5.3~1''1'pplies to plant instrumentation systems.~b'o delineate the.conditions of the plant instrumenta-tion and safety circuits necessary to assure reactor safety and to limit the release of radioactive materials.
'f'or on-line testing or in the event of a sub-system instrumentation channel failure, plant operation at rated power shall be permitted to continue in accordance with Tables 3.5-1 through 3.S-3.In the event the number of channels of a particular sub-system in service falls below the limit given by the columns entitled Minimum Operable Channels and/or Minimum Degree of Redundancy cannot be achieved, opera-tion shall be limited according to the requirement shown in Column 6 of Tables 3.S-1 through 3.5-3.The radioactive effluent monitoring instrumentation shown in Table 3.5-4 shall be operable with alarm/trip setpoints set to ensure that the limits of Specifica-tions 3.9.1.1 and 3.9.2.1 are not exceeded.3.S.3.1 If a radioactive effluent monitoring instrumentation alarm/trip setpoint, is less conservative than required, immediately suspend the release of effluents.
monitored by the affected channel or declare the channel inoperable.
3.5-1 I f If, during a release, the number of channels which are operable is less than reguired, take the action shown in Table 3.5-4.Basis: During plant operations, the complete instrumentation
')systems will normally be in service.Reactor safety is provided by the Reactor Protection System, which auto-matically initiates appropriate action to prevent.exceeding established limits.Safety is not compromised, however, by continuing operation with certain instru-mentation channels out, of service since provisions were made for this in the plant design.This specification outlines limiting conditions for operation necessary to preserve the effectiveness of the reactor control and protection system when any one or more of the channels is out of service.Almost all reactor protection channels are supplied with sufficient redundancy to provide the capability for channel calibration and test at power.Exceptions are backup channels such as reactor coolant pump breakers.The removal, of one trip channel is accomplished by placing that channel bistable in a tripped mode;e.g., a two-out-of-three circuit becomes a one-out-of-two circuit..Testing does not trip the system unless a trip condition exists in a concurrent channel.3.5-2
~J 3.9 Plant Effluents A licabilit Applies to the release of radioactive liquids and gases from the plant.~b'o define the conditions for release of radioactive liquid and gaseous wastes.S ecifications 3.9.1 Li uid Effluents 3.9.1.1 Concentration 3.9.1.1.a The release of radioactive liquid effluents shall be such that the concentration of gross beta activity above background in the circulating water discharge does not exceed the limits stated below unless the discharge is controlled on a radionuclide basis in accordance with Appendix B, Table II, Column 2 and Note 1 thereto of 10CFR20.Maximum concentration (excluding tritium and dissolved or entrained noble gases)1 x 10 uCi/ml Maximum tritium concentration 3 x 10 uCi/ml Maximum dissolved or entrained noble gas concentration 2 x 10 uCi/ml 3.9.1.1.b During release of liquid radioactive wastes, at least one condenser circulating water pump shall be in opera-tion.3.9-1
~>l 3.9.1.1.c If the limits of 3.9.1.1.a and 3.9.1.1.b are not, met, restore the concentration to within the limits or 3.9.1.2 initiate normal orderly shutdown of the liquid waste discharge within one hour.Dose 3.9.1.2.a The dose or dose commitment to an individual from radioactive materials in liquid effluents released to unrestricted areas shall be limited: (i)During any calendar quarter to<1.5 mrem to the total body and to<5 mrem to any organ, and (ii)During any calendar year to<3 mrem to the total body and to<10 mrem to any organ.3.9.1.2.b Whenever the calculated dose resulting from the release of radioactive materials in.liquid effluents exceeds the limits of 3.9.1.2.a(i), a report shall be submitted to the Commission within thirty days which identifies the cause for exceeding the dose limit and defines cor-rective actions to be Waken to reduce the releases of radioactive material in liquid effluents.
3.9.1.3 K,iquid Waste Treatment 3.9.1.3.a The system shall be used to reduce the radioactive materials in liquid wastes prior to their discharge when the projected dose due to projected liquid effluent releases when averaged over 31 days would otherwise exceed 0.'25 mrem to the total body or 0.8 mrem to any organ.3.9-2
~k l 3.9.1.3.b If radioactive liquid waste is being discharged without treatment.
when reguired by Specification 3.9.1.3.a, prepare and submit, a report to the Commission within 30 days which includes the following information: (i)Identification of equipment or subsystems not operated and the reasons.(ii)Action(s)taken to restore the inoperable eguipment to operable status.(iii)Summary description of action(s)taken to prevent a recurrence.
3.9.2 Gaseous Wastes 3.9.2.1 Release Rate 3.9.2.l.a The dose rate, at any time, due to radioactive materials released in gaseous effluents from the site shall be limited to the following values: (i)The dose rate for noble gases shall be<500 mrem/yr to the total body and<3000 mrem/yr to the skin, and (ii)The dose rate for all radioiodines, radioactive materials in particulate form, and radionuclides other than noble gases with half lives greater than 8 days shall be<1500 mrem/yr to any organ.3.9.2.1.b For unplanned release of gaseous wastes, compliance with 3.9.2.1.a may be determined by averaging over a 24-hour period.3.9-3
~l 3.9.2.1.c During planned release of gaseous waste from Gas Decay Tanks to the Auxiliary Building Vent, at least one auxiliary building exhaust, fan shall be in operation.
3.9.2.1.d If the limits of 3.9.2.1 above are not met for contain-ment purge or Gas Decay Tank release, decrease the release rate from that.system to comply with the limits, or initiate normal orderly shutdown of that gaseous 3.9.2.2 release within one hour.Dose (10 CFR Part 50, Appendix I)3.9.2.2.a The air dose due to noble gases released in gaseous effluents from the site shall be limited to the follow-ing: (i),During any calendar quarter to 5 mrad for gamma radiation and to 10 mrad for beta radiation.(ii)During any calendar year 10 mrad for gamma radia-tion and 20 mrad for beta radiation.
3.9.2.2.b The dose to an individual from radioiodine, radioactive materials in particulate form and radionuclides other than noble gases with half-lives greater than eight days released with gaseous effluents.from th site shall be limited to the following: (i)During any calendar quarter to 7.5 mrem to any quarter.(ii)During any calendar year to 15 mrem to any quarter.3.9-4
~4 3.9.2.2.c Whenever the calculated dose to an individual resulting from noble gases or from radionuclides other than noble gases exceeds the limits of 3.9.2.2.a(i) or 3.9.2.2.b(i), a report shall be submitted to the Commission within 30 days which identifies the cause for exceeding the dose limit and defines corrective actions to be taken to reduce the releases of radioactive material in gaseous 3.9.2.3 effluents.
Gaseous Waste Treatment 3.9.2.3.a The gaseous radwaste treatment system shall be used to reduce radioactive materials in gaseous waste prior to their discharge when the projected air doses due to gaseous effluent releases to unrestricted areas when averaged over 31 days would otherwise'exceed 0.8 mrad for gamma radiation and 1.7 mrad for beta radiation.
3.9.2.3.b The ventilation exhaust system shall be used to reduce radioactive materials in gaseous waste prior to their discharge when the projected doses due to gaseous effluent releases from the site when averaged over 31: days would otherwise exceed 1.25 mrem to any organ.3.9.2.3.c If gaseous waste is being discharged without treatment when reguired by Specifications 3.9.2.3.a or 3.9.2.3.b, prepare and submit a report to the Commission within C 3.9-5
~4~1 30 days which includes the following information: (i)Identification of equipment or subsystems not operated and the reasons.(ii)Action(s)taken to restore the inoperable equip-ment to operable status.(iii)Summary description of action(s)taken to prevent a recurrence.
3.9.2.4 Dose (40 CFR Part 190)3.9.2.4.a If the calculated dose from the release of radioactive materials from the plant in liquid or gaseous effluents exceeds twice the limits of Specifications 3.9.1.2.a, 3.9.2.2.a, or 3.9.2.2.b, prepare and submit a report to the Commission and limit the subsequent.
releases such that the dose or dose commitment to a real individual is limited to<25 mrem to the total body or any organ (except thyroid, which is limited to<75 mrem)over the quarter in which the limits were exceeded plus the subsequent three quarters.This report shall include an analysis which demonstrates that radiation exposure's to all real individuals from the plant are less than the 40 CFR Part 190 limits.Otherwise, obtain a vari-ance from the Commission to permit releases to exceed 40 CFR Part 190.3.9-6
~~\t4$
3.9.2.5 Explosive Gas Nixture 3.9.2.5.a The concentration of'xygen in each gas decay tank shall be limited to<2%by volume.3.9.2.5.b If the concentration of oxygen in a gas decay tank is>2%by volume but.<4%by volume, restore the concentra-tion of oxygen to within the limit within 48 hours.3.9.2.5.c If the concentration of oxygen in a gas decay tank is>4%by volume, immediately suspend all additions of waste gases to that gas decay tank*and reduce the concentration of oxygen to<2%within 48 hours.Basis Iiguid wastes from the Radioactive Waste Disposal System are diluted in the Circulating Water System discharge prior to release to the lake.With two pumps operating, the capacity of the Circulating Water System is 400,000 gpm.Operation of a single circulating water pump reduces the nominal flow rate by about 50%.The circulating water flow under various operating conditions has been calculated from the head differential across the pumps and the manufacturer's head-capacity curves.Because of the low radioactivity levels in the circulating water discharge, the concentration of liquid radioactive effluents at.this point will not be measured directly.The concentration in the circulating water discharge will be calculate'd from the measured concentration in the Waste Condensate Tank, the flow 3.9-7 1'
rate of the Waste Condensate Pumps, and the flow in the Circulating Water System.Radioactive effluents released to unrestricted areas on the basis of gross beta analysis are based on the assumption that I-129 and'radium are not present,.Accordingly, Appendix B, Table II, Column H 2 of 10CFR20 will permit a concentration up to 1 x 10 uCi/ml in the circulating water discharge.
If the con-centration of liquid wastes in the circulating water discharge equals NPC as specified, the average concentra-tion at the intake of the nearest, public water supply at Ontario, New York, would be well below NPC.Thus, discharge of liquid wastes at.the specified maximum concentrations will not result in significant exposure to members of the public as a result of consump-tion of drinking water from the lake, even if the effects of potable water treatment systems on reducing radioactive concentration of the water supply are neglected.
The concentration limit for noble gases is based upon the assumption that.Xe-135 is the controlling radio-isotope and its NPC in air was converted to an equivalent concentration in water using ICRP Publication 2 method-ology.Specification 3.9.1.2 is provided to implement.
the requirements of Sections II.A, III.A and-IV.A of Appendix I.The Limiting Condition for Operation implements the guides set.forth in Section II.A of Appendix I.The 3.9-8
\I8 Specifications provide the required operating flexi-bility and at the same time implement the guides set.forth in Section IV.A of Appendix I.The dose calcula-tions in the ODCN implement the requirements in Section III.A of Appendix I that conformance with the guides of Appendix I is to be shown by calculational procedures based on models and data such that the actual exposure of a real individual through appropriate pathways is unlikely to be substantially underestimated.
The requirements that the appropriate portions of this system be used when specified provides assurance that the releases of radioactive materials in liquid effluents will'e kept"as low as is reasonably achievable." This specification implements the requirements of 10 CFR Part 50.36a, General Design Criterion 60 of Appendix A to 10 CFR Part 50 and design objective Section II.D of Appendix I.The limits governing the use of appro-priate portions of the liquid radwaste'reatment system were specified as a suitable fraction of the guide set forth in Section II.A of Appendix I for liquid effluents.
A dose projection which exceeds the stated limit does not necessarily imply that all portions of the liquid radwaste treatment system be used because certain subsystems may have minimal effects on'educing doses.Specification 3.9.2.1 is provided to ensure that, the dose rate at.any time at, the site boundary from gaseous effluents will be within the annual dose limits of 10 3.9-9 elCl CFR Part 20 for unrestricted areas.The annual dose limits are the doses associated with the concentrations of 10 CFR Part 20, Appendix B, Table II.These limits provide reasonable assurance that radioactive material discharged in gaseous effluents will not result in the exposure of an individual in an unrestricted area, to annual average concentrations exceeding the limits specified in Appendix B, Table II of 10 CFR Part 20 (10 CFR Part 20.106(b)).
For individuals who may at, times be within the site boundary, these occupancy times will be sufficiently small to compensate for any increase in the atmospheric diffusion factor above that for the site, boundary.Specification 3.9.2.2 is provided to implement the requirements of Sections II.B, II.C, III.A and IV.A of Appendix I.The limiting Condition for Operation implements the guides set forth in Sections II.B and II.C of Appendix I.The Specifications provide the required operating flexibility and at, the same time implement the guides set forth in Section IV.A of Appendix I.The requirement that the appropriate portions of the gaseous radwaste treatment system and the ventilation exhaust treatment system be used when specified provides reasonable assurance that.the releases of radioactive materials in gaseous effluents will be kept"as low as is reasonably achievable." This specification implements 3.9-10


the requirements of 10 CFR Part 50.36a, General Design Criterion 60 of Appendix A to 10 CFR Part, 50, and design objective Section II.D of Appendix I.The limits governing the use of appropriate portions of the systems were specified as a suitable fraction of the guide set forth in Sections II.B and II.C of Appendix I, 10 CFR Part 50, for gaseous effluents.
Enclosed are:
A dose projection which exceeds the stated limit does not necessarily imply that all portions of the gaseous and ventilation exhaust treatment.
: l.           Three (3) originals and nineteen (19) copies of an Application for Amendment to Operating License to amend Appendix A of that license to revise Technical Specifications to incorporate radiological effluent specifications.
systems be used because certain subsystems may have minimal effect on reducing doses.Specification 3.9.2.4 is provided to meet, the reporting requirements of 40 CFR 190.Since the plant is well removed from other fuel cycle facilities, it, is suffi-cient to apply the Specification only to the plant.Specification
: 2.         Also enclosed are forty (40) copies of documents designated Attachments A and B, which set forth the revised Table and further describe the purposes of the changes made.
=-3.9.2.5 is provided to ensure that the concentration of potentially explosive gas mixtures contained in the gas decay tanks are maintained below the flammability limit of oxygen.Naintaining the concentration of oxygen below its flammability limits provides assurance that the releases of radioactive materials will be controlled in conformance with the requirements of General Design Criterion 60 of Appendix A to 10 CFR Part 50.3.9-11
This change supersedes our previous proposal, dated February 14, 1979, on this subject. Thus, no fee is rec(uired.
~P Ill References (1)(2)(3)FSAR, Section 10.2 FSAR, Section 2, Appendix 2A FSAR, Sections 2.6 and 2.7 3.9-12
Sincerely, 8208i702i    4 8208i2 PDR ADGCH 05000244 P
~l I Radiolo ical Environmental Monitorin b'1'pplies to routine testing of the plant environs.~b'o establish a program which will assure recognition of changes in radioactivity or exposure pathways in the environs.~f'onitorin Pro ram 3.15.1.a The radiological environmental monitoring program shall be conducted as specified in Table 3.15-1.3.15.1.b If the radiological environmental monitoring program is not conducted as specified in Table 3.15-1, prepare and submit to the Commission, in the Annual Radiological Environmental Operating Report, a description of the reasons for not conducting the program as required and the plans for preventing a recurrence.(Deviations are permitted from the required sampling schedule if speci-mens are unobtainable due to hazardous conditions, seasonal unavailability, or to malfunction of automatic sampling equipment.
If the latter, every effort shall be made to complete corrective action prior to the end 3.15.1.c of the next sampling period.)If the level of radioactivity in an environmental sampling medium at one or more of the locations specified in the ODCN exceeds the reporting levels of-Table 6.9-2 when averaged over any calendar quarter, a report 3.15-1
~J shall be submitted to the Commission within 30 days pursuant to Specification 6.9.2.b(5) which includes an evaluation of any release conditions, environmental factors or other aspects which caused the reporting levels of Table 6.9-2 to be exceeded.This report is'1 not required if the measured level of radioactivity was not the result of plant effluents; however, in such an event, the condition shall be reported and described in.the Annual Radiological Environmental Operating Report.3.15.l.d If milk or fresh leafy vegetable samples are unavailable for more than one sample period from one or more of the sampling locations required by the ODCN, prepare and 7 submit to the Commission within 30 days a report which identifies the cause of the unavailability of samples and identifies locations for obtaining replacement samples.If a milk or leafy vegetable sample location becomes unavailable, alternate sample locations within 5 miles of the plant will be reviewed.The locations from which samples were unavailable may then be deleted from the ODCN provided that, the alternate locations are 3.15.2 3.15.2.a added to the environmental monitoring program.Land Use Census A land use census shall be conducted and shall identify the location of the nearest.milk animal and the nearest residence in each of the 16 meteorological sectors within a distance of five miles.3.15-2 I
3.15.2.b If a land use census identifies a location(s) which" yields a calculated dose or dose commitment greater than that of the maximally exposed individual currently being calculated in Specification 4.12.2.2, prepare and submit a report to the Commission within 30 days which identifies the new location(s).
3.15.2.c 3.15.3 If a land use census identifies a milk location(s) which yields a calculated dose or dose commitment greater than that at a location from which samples are currently being obtained in accordance with Specifica-tion 3.15.1, prepare and submit a report, to the Com-mission within 30 days which identifies the new location.The new location shall be added to the radiological environmental monitoring program within 30 days, if possible.The milk location having the lowest calculated dose or dose commitment may be deleted from this monitor-ing program after October 31 of the year in which this land use census was conducted.
Interlaborator Com arison Pro ram 3.15.3.a Analyses shall be performed on applicable radioactive materials supplied as part of an interlaboratory com-parison program which has been approved by NRC, if such a program exists.3.15.3.b If analyses are not performed as required above, report the corrective actions taken to prevent a recurrence in the Annual Radiological Environmental Operating Report.3.15-3 I Ck Basis The radiological monitoring program required by this specification provides measurements of radiation and of radioactive materials in those exposure pathways and for those radionuclides which lead to the highest'I potential radiation exposures of individuals resulting from the station operation.
This monitoring program thereby supplements the radiological effluent monitoring program by verifying that the measurable concentrations of radioactive materials and levels of radiation are not higher than expected on the basis of the effluent measurements and modeling of the environmental exposure pathways.The initially specified monitoring program will be effective for at least three years.Following this period, program changes may be initiated based on operational experience.
Specification 3.15.2 is provided to ensure that changes in the use of unrestricted areas are identified and that modifications to the monitoring program are made if required by the results of this census.A garden census is not required since an onsite garden will be used.This census satisfies the requirements of Section IV.B.3 of Appendix I to 10 CFR Part 50.The requi'rement for participation in an interlaboratory comparison program is provided to ensure that independent checks on the precision and accuracy of the measurements of radioactive material in environmental sample matrices 3.15-4  


are performed as part of a quality assurance program for environmental monitoring in order to demonstrate that the results are reasonably valid.Only samples with radioactivity levels comparable to levels in environmental samples need be analyzed.3.15-5 J
    ~~~5 6'pc~. se c.W                '< ~,e~/rz/sE-~ams
TABLE 3.15-1 Ez osure Pathwa and or Sam le Sam lin and an Sam le Locate.ons Co lection Fre uenc RADIOLOGICAL ENVIRONMENTAL MONITORING PROGRAN Number of Sam les T e and Fre uenc of Anal sos l.AIRBORNE Cr>Ul Ch a.Radioiodine b.Particulates 3 on site 5 on site 2 off site Continuous of sampler collection once per 7 operation with sample at least days.Radioiodine canister.Analyze at least once per 7 days for I-131.Particulate sampler, Analyze for gross beta radioactivity
                                                        <i~rt/~K ~A'-//8czar
>24 hours following filter change.Perform gamma isotopic analysis on each sample for which gross beta activity is>10 times the mean of offsite samples.Perform gamma isotopic analysis on composite (by location)sample at least once per 92 days.2." DIRECT RADIATION Film at least.once per month.or TLD's at least quarterly.
                                ~s/~ o/s      C3pg Attachment  A Revise the Technical Specifications as follows:
Gamma dose monthly.or Gamma dose quarterly.
Remove                          Insert.
P TABLE 3.15-1 CONTINUED RADIOLOGICAL ENVIRONNENTAL NONITORING PROGRAM Number of Sam les Ex osure Pathwa and/or Sam le and Sam e Locations Sam lin and Collection Fre uenc T e and Fre uenc of Anal sz.s 3.WATERBORNE 4J Vl I a.Surface b.Drinking 1 Inlet Condenser Water 1 Ontario Water District Intake Composite sample collected daily over a period of<31 days Composite sample col-lected daily over a period of<31 days.Gamma isotopic analysis of each sample.Tritium analysis of sample at least once per 92 d'ays.Gross beta and gamma isotopic analysis of each composite sample.Tritium analysis of one composite sample at leas once per 92 days S
Table of Contents            Table of Contents p 1-2                        p 1-2 p 1-2a 1-5                        p 1-5 p 3.5-1 through 3.5-3        p  3.5-1 throug 3.5-3 p  3.5-7 through 3.5-9 p 3.9-1 through 3.9-7         p  3.9-1 thrp6gh 3.9-12 p  3.15-1 tlfrough 3.15-8 p 4.1-1                      p  4.1-1 p 4.1-5 through 4.1-7        p  4.1-5 ~through 4.1-7 p  4.1-14 p  4.1/~2 p 4.10-1 hrough 4.10-5      p  4.10-1 through 4.10-5 p 4.12-1 through 4.12-5      p  4/12-1 through 4.12-9 p  +.5-1 p 6.5-10                    p~6.5-10 6.5-10a p  6.8-1                      p  6.8-1
TABLE 3.15-1 CONTINUED RADIOLOGICAL ENVIRONMENTAL MONITORING PROGRAM Ex osure Pathwa and or Sam le 4.INGESTION a.Milk b.Fish Number of Sam les and-Sam le Locate.ons 3 June through October each of 3 farms 1 November thru May one of the farms 8 Off shore at.Ginna Sam lin and Collection Fre uenc At least once per 15 days At least once per 31 days.Twice during fishing season including at least four species T e and Fre enc of Anal sos Gamma isotopic and I-131 analysis of each sample.Gamma isotopic and I-131 analysis of each sample.Gamma isotopic analysis on edible portions of each sample.c.Food Products 2 On site Annual at time of harvest.One sample of: 1.apples 2.cherries Gamma isotopic analysis on edible portion of sample.2 On site garden At time of harvest.One sample of: 1.broad leaf vegetation 2.squash I-131 analysis
: p. 6.8-2 p  6.9-1 through 6. -2        p 6.9-1 through 6.9-3 p 6.9-3a through 6.9-3c p  6.9-6 through 6.9-3,      p 6.9-6 through 6.9-10 p 6.14-1 p 6.15-1 p 6.15-2
~P J 4.0 SURVEIIIANCE RE UIREPIENTS 4.1 4.1.1 4.1.2 4.1.3 Specified intervals may be adjusted plus or minus 25%to accommodate normal test schedules.
 
0 erational Safet Review~l.''1'pplies to items directly related to safety limits and limiting conditions for operation.
TABLE OF CONTENTS PacCe 1.0  DEFINITIONS 2.0  SAFETY LIMITS AND LIMITING SAFETY SYSTEM SETTINGS  2.1-1 2.1  Safety Limit, Reactor Core                    2.1-1 2.2   Safety Limit, Reactor Coolant System Pressure 2 k2 1 2.3  Limiting Safety Systems Settings, Protective Instrumentation                              2 3 1
~b'o specify the minimum frequency and type of surveillance to be applied to plant equipment and conditions.
                                                          ~
'f'alibration, testing, and checking of analog channel and testing of logic channel shall be performed as specified in Table 4.1-1.Equipment and sampling tests shall be conducted as specified in Table 4.1-2.Each radioactive effluent monitoring instrumentation channel shall be demonstrated operable by performing the channel check, source check, channel functional test, and channel calibration at the frequency shown in Table 4.1-3.Basis: Check Failure such as blown instrument fuses, defective in-dicators, faulted amplifiers which r'esult in"upscale" or"downscale" indication can be easily recognized by simple observation of the functioning of an instrument or system.Furthermore, such failures are, in many cases, revealed 4.1-1 4 C TABLE 4.1-1 (CONTINUED)
3.0  LIMITING CONDITIONS    FOR OPERATION                3.1-1 3.1   Reactor Coolant System                        3 1 1
Channel 10.Rod Position Bank Counters Check S(1,2)Calibrate N.A.Test N.A;Remarks 1)Each six inches of rod motion when data logger is out of service 2)With analog rod position 11.12.13.14.15.18.19.20.21.22.23.24.Steam Generator Level Charging Flow Residual Heat Removal Pump Flow Boric Acid Tank Level Refueling Water Storage Tank Level Volume Control Tank Level Reactor Containment Pressure Radiation Monitoring System Boric Acid Control Containment Drain Sump Level Valve Temperature Interlocks Pump-Valve Interlock Turbine Trip Set-Point, Accumulator Level and Pressure N.A.N.A.D N.A.N.A.D D N.A.N.A.N.A.N.A.R R R R R R N.A.N.A.R R N.A.N.'A.N.A.N.A.N.A.M(1)N.A.N.A.N.A.M(1)N.A.Bubbler tube rodded weekly 1)Isolation Valve signal Area Monitors Rl to R9 System Monitors R16, R17, and R20 1)Block trip k
                                                          ~
Radiolo ical Environmental Monitorin~1''1'ppl''1 pl environs.~b'-*bl'pl'~ly'g which will assure recognition of changes in radioactivity in the environs.'1'he radiological environmental monitoring samples shall be collected pursuant to Table 3.15-1.Acceptable locations are shown in the ODCM.Samples shall be analyzed pursuant to the requirements of Tables 3.15-1 and 4.10-1.A land use census shall be conducted annually (between June 1 and October 1).Basis The environmental survey has been designed to utilize the knowledge about dilution in the atmosphere and in the lake which has been gained during the pre-operational and operational period of study.The radiological monitoring program provides measurements of radiation and of radioactive materials in those'xposure pathways and for those radionuclides which lead to the highest potential radiation exposures of*individuals resulting from the station operation.
3.1.1  Operational Components                3 01 1 3.1.2  Heatup and Cooldown                  3.1-5 3.1.3  Minimum Conditions for Criticality    3.1-17 3.1.4   Maximum Coolant Activity              3.1-20 3.1.5  Leakage                              3.1-25 3.1.6  Maximum  Reactor Coolant Oxygen, Fluoride, and Chloride Concentration  3 ~ 1 31 3.2  Chemical and Volume Control System            3~2 1 3.3  Emergency Core Cooling System Auxiliary Cooling Systems, Air Recirculation Fan Coolers, Containment Spray, and Charcoal Filters                                      3 ~3 1 3.4  Turbine Cycle                                3.4-1 3.5  Instrumentation System                        3.5-1 3.6  Containment System                            3.6-1 3.7 Auxiliary Electrical Systems                    3 7 1
This monitoring program thereby supplements the radiological effluent monitoring program by verifying that the 4.10-1 k
                                                          ~
measurable concentrations of radioactive materials and levels of radiation are not higher than expected on the basis of the effluent measurements and modeling of the environmental exposure pathways.The detection capabilities required by Table 4.10-1 are state-of-the-art for routine environmental measurements in industrial laboratories.
3.8 Refueling                                      3. 8-1 3.9 Plant Effluents                                3. 9-1
The specified lower limits of detection for I-131 in water, milk, and other food products correspond to approximately one-quarter of the Appendix I to 10 CFR Part 50 design objective dose-equivalent of 15 mrem/year for atmospheric releases and 10 mrem/year for liquid releases to the maximally exposed organ and individual.
: 3. 10 Control Rod and Power Distribution Limits      3.10-1 3.11 Fuel Handling in the Auxiliary Building        3.11-1 3.12 Movable In-Core Instrumentation                3.12-1 3.13  Shock Suppressors  (Snubbers)                3.13-1 3.14  Fire Suppression System                      3.14-1 3.15  Radiological Environmental Monitoring        3.15-1
 
I TABLE OF CONTENTS  (cont.)
                                                          ~Pa e 4.0  SURVEILLANCE REQUIREMENTS                          4.1-1 4.1 Operational Safety Review                      4.1-1 4.2  Primary Components Tests                      4.2-1 4.3  Primary System Testing Following Opening      4.3-1 Containment Tests                              4.4-1 4.5  Safety Injection, Containment Spray and Iodine Removal Systems Tests                          4.5-1 4.6  Emergency Power System Periodic Tests          4.6-1 4.7  Main Steam Stop Valves                        4.7-1 4.8  Auxiliary Feedwater System                    4.8-1 4.9  Reactivity Anomalies                          4.9-1 4.10  Radiological Environmental Monitoring         4.10-1 4.11  Spent Fuel Pit Charcoal Adsorber Testing      4.11-1 4.12  Effluent Surveillance                          4.12-1 4.13  Radioactive Material Source Leakage Test      4.13-1 4.14  Shock Suppressors (Snubbers)                  4.14-1 4.1S  Fire Suppression System Test                  4.15-1 5.0  DESIGN FEATURES 5.1  Site                                          5.1-1 5.2  Containment, Design Features                  5.2-1 5.3  Reactor Design Features                        5.3-1 S.4  Fuel Storage                                  5.4-1 5.5  Waste Treatment Systems                        5.5-1 6.0  ADMINISTRATIVE CONTROLS 6.1  Responsibility                                6.1-1 6.2  Organization                                  6.1-1 6.2.1 Offsite                                  6.1-1 6.2.2 .Facility Staff                          6.1-1 6.3  Station Staff Qualifications                  6.3-1 6.4  Training 6.5  Review and Audit 6.5.1 Plant Operations Review Committee (PORC) 6.5-1 6.5.2 Nuclear Safety Audit and Review Board (NSARB)                                6.5-5 6.5.3 Quality Assurance Group                  6.5-11 6.6  Reportable Occurrence Action                  6.6-1 6.7  Safety Limit Violation                        6.6-1 6.8  Procedures                                    6.8-1 6.9  Reporting Requirements                        6.9-1 6.9.1 Routine Reports                          6.9-1 6.9.2 Reportable Occurrence                    6.9-3b 6.9.3 Unique Reporting Requirements            6.9-10 6.10  Record Retention                              6.10-1 6.11  Radiation Protection Program                  6.11-1 6.12  (Deleted) 6.13  High Radiation Area                            6. 13-1 6.14  Offsite  Dose Calculation Manual              6.14-1 6.15  Major Changes  to Radioactive Waste Treatment Systems                                        6.15-1
 
0  eratin Performing  all intended functions in the intended manner..
De  ree  of Redundanc    Instrument Channels The  difference between the number of operable channels and  the number of channels which, when tripped, will cause an automatic system      trip.
Instrument Surveillance Channel  Calibration The adjustment,    as necessary,  of the channel output so that  it responds  with the necessary range and accuracy to known values of the parameter which the channel moni-tors. The Channel Calibration shall encompass the entire channel including the sensor and alarm and/or trip func-tions, and shall include the Channel Functional Test.
The Channel Calibration may be performed by any series of sequential, overlapping or total channel steps so that the entire channel is calibrated.
Channel Check The  qualitative  assessment  of channel behavior during operation by observation. This determination shall in-elude, where possible, comparison of the channel indica-tion and/or status with other indications and/or status derived from independent instrumentation channels measur-ing the same parameter.
 
1 Channel Functional Test
: a. Analog channels - the    injection of  a simulated signal into the channel as close to the sensor as practicable to verify operability including alarm and/or trip funci ions.
: b. Bistable channels  the injection of a simulated signal into the sensor to verify operability includ-ing alarm and/or trip function.
Source Check The qualitative    assessment. of channel response when the channel sensor    is  exposed  to a radioactive source.
1-2a
 
I Fre uenc    Notation The frequency notation specified for the performance of surveillance requirements shall correspond to the inter-vals defined below.
Notation                          Fre uenc S, Each Shift                  At least once per 12 hours    .
D, Daily                      At least once per 24 hours Twice per week            At least once per 4 days and at least, twice per 7 days W, Weekly                      At least once per 7 days B/W, Biweekly                  At least once per 14 days N,  Nonthly                    At, least. once per 31 days B/N, Bimonthly                At  least  once per 62 days Q,  Quarterly                  At  least  once per 92 days SA,  Semiannually              At  least  once per  6 months A,  Annually                  At  least  once per 12 months R,  Refueling                  At  least  once per 18 months Prior to    each startup N.A.                          Not Applicable Within  12  hours prior to  each release Offsite  Dose Calculation Nanual ODCN The ODCN is a manual containing the methodology and parameters to be used for calculating the offsite doses due to liquid and gaseous effluents and in calculation of liquid and gaseous effluent monitoring instrumentation alarm/trip setpoints.
                      '1-5
 
~ I 3.5    Instrumentation S stem 0 erational Safet Instrumentation
        ~1''1'pplies to plant instrumentation systems.
        ~b'o delineate the. conditions of the plant instrumenta-tion and safety circuits necessary to assure reactor safety and to limit the release of radioactive materials.
                'f'or 3.5.1          on-line testing or in the event of a sub-system instrumentation channel failure, plant operation at rated power shall be permitted to continue in accordance with Tables 3.5-1 through 3.S-3.
3.5.2  In the event the number of channels of a particular sub-system      in service falls below the limit given by the columns entitled Minimum Operable Channels and/or Minimum Degree of Redundancy cannot be achieved, opera-tion shall be limited according to the requirement shown in Column 6 of Tables 3.S-1 through 3.5-3.
3.5.3  The radioactive effluent monitoring instrumentation shown in Table 3.5-4 shall be operable with alarm/trip setpoints set to ensure that the limits of Specifica-tions 3.9.1.1 and 3.9.2.1 are not exceeded.
3.S.3.1 If a radioactive effluent monitoring instrumentation alarm/trip setpoint, is less conservative than required, immediately suspend the release of effluents. monitored by the affected channel or declare the channel inoperable.
3.5-1
 
I f If,  during a release, the number of channels which are operable is less than reguired, take the action shown in Table 3.5-4.
Basis:
During plant operations,    the complete instrumentation
                                              ')
systems  will normally  be  in service. Reactor safety  is provided by the Reactor Protection System, which auto-matically initiates appropriate action to prevent.
exceeding established limits. Safety is not compromised, however, by continuing operation with      certain instru-mentation channels out, of service since provisions were made for this in the plant design.      This specification outlines limiting conditions for operation necessary to preserve the effectiveness of the reactor control and protection system when any one or more of the channels is out of service.
Almost  all reactor protection  channels are supplied with sufficient redundancy to provide the capability for channel calibration and test at power. Exceptions are backup channels such as reactor coolant pump breakers.
The removal, of one trip channel is accomplished by placing that channel bistable in a tripped mode; e.g.,
a two-out-of-three circuit becomes a one-out-of-two circuit. .Testing  does  not  trip the system unless  a trip  condition exists in  a  concurrent channel.
3.5-2
 
~ J 3.9      Plant Effluents A    licabilit Applies to the release of radioactive liquids and gases from the plant.
          ~b'o define the conditions for release of radioactive liquid    and gaseous  wastes.
S    ecifications 3.9.1    Li uid Effluents 3.9.1.1  Concentration 3.9.1.1.a The    release of radioactive    liquid effluents shall be such that the concentration of gross beta activity above background in the circulating water discharge does not exceed the limits stated below unless the discharge is controlled on a radionuclide basis in accordance      with Appendix  B, Table  II,  Column  2  and Note 1    thereto of 10CFR20.
Maximum    concentration (excluding tritium and dissolved or entrained noble gases) 1  x 10    uCi/ml Maximum    tritium concentration 3  x 10    uCi/ml Maximum    dissolved or entrained noble gas concentration 2 x 10    uCi/ml 3.9.1.1.b During release of liquid radioactive wastes, at least one condenser      circulating water  pump  shall be  in opera-tion.
3.9-1
 
~ > l 3.9.1.1.c If the  limits of 3.9.1.1.a    and  3.9.1.1.b are not, met, restore the concentration to within the limits or initiate normal orderly shutdown of the liquid waste discharge within one hour.
3.9.1.2  Dose 3.9.1.2.a The dose  or dose commitment to an individual from radioactive materials in liquid effluents released to unrestricted areas shall    be  limited:
(i)  During any calendar quarter to < 1.5      mrem to the total body and to <5 mrem to any organ, and (ii) During any calendar year    to <  3 mrem to the total body and to < 10 mrem to any organ.
3.9.1.2.b Whenever the calculated dose resulting from the release of radioactive materials in .liquid effluents exceeds the limits of 3.9.1.2.a(i), a report shall be submitted to the Commission within thirty days which identifies the cause for exceeding the dose limit and defines cor-rective actions to be Waken to reduce the releases of radioactive material in liquid effluents.
3.9.1.3  K,iquid Waste Treatment 3.9.1.3.a The system shall be used to reduce the radioactive materials in liquid wastes prior to their discharge when the projected dose due to projected liquid effluent releases when averaged over 31 days would otherwise exceed 0.'25 mrem to the total body or 0.8 mrem to any organ.
3.9-2
 
~ k l 3.9.1.3.b  If radioactive  liquid  waste is being discharged without treatment. when reguired by Specification 3.9.1.3.a, prepare and submit,  a  report to the Commission within 30 days which includes the following information:
(i) Identification of equipment or subsystems not operated and the reasons.
(ii) Action(s)  taken to restore the inoperable eguipment to operable status.
(iii) Summary description of action(s) taken to prevent a recurrence.
3.9.2      Gaseous  Wastes 3.9.2.1    Release Rate 3.9.2.l.a  The dose  rate, at any time, due to radioactive materials released in gaseous effluents from the site shall be limited to the following values:
(i) The dose rate for noble gases shall be < 500 mrem/yr to the total body and < 3000 mrem/yr to the skin, and (ii) The dose rate for all radioiodines, radioactive materials in particulate form, and radionuclides other than noble gases with half lives greater than 8 days shall be < 1500 mrem/yr to any organ.
3.9.2.1.b For unplanned release of gaseous wastes, compliance with 3.9.2.1.a may be determined by averaging over a 24-hour period.
3.9-3
 
~ l 3.9.2.1.c During planned release of gaseous waste from Gas Decay Tanks to the Auxiliary Building Vent, at least one auxiliary building exhaust, fan shall be in operation.
3.9.2.1.d If the limits of 3.9.2.1 above are not met for contain-ment purge or Gas Decay Tank release,    decrease  the release rate from that. system to comply with the limits, or initiate normal orderly shutdown of that gaseous release within one hour.
3.9.2.2  Dose (10 CFR  Part 50, Appendix I) 3.9.2.2.a The air dose due to noble gases released in gaseous effluents from the site shall be limited to the follow-ing:
(i) ,During any calendar quarter to 5 mrad for gamma radiation and to 10 mrad for beta radiation.
(ii) During any calendar year 10 mrad for gamma radia-tion and 20 mrad  for beta radiation.
3.9.2.2.b The dose to an individual from radioiodine, radioactive materials in particulate form and radionuclides other than noble gases with half-lives greater than eight days released with gaseous effluents .from th site shall be limited to the following:
(i)  During any calendar quarter to 7.5    mrem  to any quarter.
(ii) During  any calendar year  to 15 mrem  to  any  quarter.
3.9-4
 
~4 3.9.2.2.c Whenever the    calculated dose to an individual resulting from noble gases or from radionuclides other than noble gases exceeds the limits of 3.9.2.2.a(i) or 3.9.2.2.b(i),
a report shall be submitted to the Commission within 30 days which    identifies the  cause  for exceeding the    dose limit and  defines corrective actions to be taken to reduce the releases    of radioactive material in    gaseous effluents.
3.9.2.3  Gaseous  Waste Treatment 3.9.2.3.a The gaseous    radwaste treatment system shall be used to reduce radioactive materials      in gaseous  waste  prior to their  discharge when the projected    air doses due  to gaseous  effluent releases to unrestricted      areas when averaged over 31 days would otherwise 'exceed 0.8 mrad for  gamma  radiation and 1.7 mrad for beta radiation.
3.9.2.3.b The ventilation exhaust system shall be used to reduce radioactive materials in gaseous waste prior to their discharge when the projected doses due to gaseous effluent releases from the site when averaged over 31:
days would otherwise exceed 1.25 mrem to any organ.
3.9.2.3.c If gaseous waste is being discharged without treatment when reguired by Specifications 3.9.2.3.a or 3.9.2.3.b, prepare and submit a report to the Commission within C
3.9-5
 
~ 4  1
    ~
 
30 days which  includes the following information:
(i)  Identification of equipment or subsystems not operated and the reasons.
(ii) Action(s) taken to restore the inoperable equip-ment  to operable status.
(iii) Summary description of action(s) taken to prevent a recurrence.
3.9.2.4    Dose (40 CFR  Part 190) 3.9.2.4.a  If the calculated dose from the release of radioactive materials from the plant in liquid or gaseous effluents exceeds twice the limits of Specifications 3.9.1.2.a, 3.9.2.2.a, or 3.9.2.2.b, prepare and submit a report to the Commission and limit the subsequent. releases such that the dose or dose commitment to a real individual is limited to < 25 mrem to the total body or any organ (except thyroid, which is limited to < 75 mrem) over the quarter in which the limits were exceeded plus the subsequent three quarters. This report shall include an analysis which demonstrates that radiation exposure's to all real individuals from the plant are less than the 40 CFR Part 190 limits. Otherwise, obtain a vari-ance from the Commission to permit releases to exceed 40 CFR Part 190.
: 3. 9-6
 
~ ~  t\
4$
 
3.9.2.5  Explosive Gas Nixture 3.9.2.5.a The concentration of'xygen in each gas decay tank shall be limited to < 2% by volume.
3.9.2.5.b If the concentration of oxygen in a gas decay tank is >
2% by volume but. < 4% by volume, restore the concentra-tion of oxygen to within the limit within 48 hours.
3.9.2.5.c If the  concentration of oxygen in  a gas decay  tank is >
4%  by volume, immediately suspend  all  additions of waste gases to  that gas decay tank*and  reduce the concentration of oxygen to < 2% within    48 hours.
Basis Iiguid wastes from the Radioactive Waste Disposal System are diluted in the Circulating Water System discharge prior to release to the lake.        With two pumps  operating, the capacity of the Circulating Water System is 400,000 gpm. Operation of a single circulating water pump reduces the nominal flow rate by about 50%.
The circulating water flow under various operating conditions has been calculated from the head differential across the pumps and the manufacturer's head-capacity curves. Because of the low radioactivity levels in the circulating water discharge, the concentration of liquid radioactive effluents at. this point will not be measured directly. The concentration in the circulating water discharge will be calculate'd from the measured concentration in the Waste Condensate Tank, the flow 3.9-7
 
1' rate of the Waste Condensate Pumps, and the flow in the Circulating Water System. Radioactive effluents released to unrestricted areas on the basis of gross beta analysis are based on the assumption that I-129 and 'radium are not present,. Accordingly, Appendix B, Table II, Column H
2 of 10CFR20 will permit a concentration up to 1 x 10 uCi/ml in the circulating water discharge.        If the con-centration of liquid wastes in the circulating water discharge equals NPC as specified, the average concentra-tion at the intake of the    nearest, public water supply at Ontario,  New York, would be well below      NPC.
Thus, discharge  of liquid wastes    at. the specified maximum  concentrations will not result in significant exposure to members of the public as a result of consump-tion of drinking water from the lake, even        if  the effects of potable water treatment systems on reducing radioactive concentration of the water supply are neglected.
The  concentration limit for noble gases is based upon the assumption that. Xe-135 is the controlling radio-isotope and its NPC in air was converted to an equivalent concentration in water using ICRP Publication 2 method-ology.
Specification 3.9.1.2 is provided to implement. the requirements of Sections II.A, III.A and -IV.A of Appendix I. The Limiting Condition for Operation implements the guides set. forth in Section II.A of Appendix I. The 3.9-8
 
I
  \
8
 
Specifications provide the required operating flexi-bility and at the same time implement the guides set.
forth in Section IV.A of Appendix I. The dose calcula-tions in the ODCN implement the requirements in Section III.A of Appendix I that conformance with the guides of Appendix I is to be shown by calculational procedures based on models and data such that the actual exposure of a real individual through appropriate pathways is unlikely to be substantially underestimated. The requirements that the appropriate portions of this system be used when specified provides assurance that the releases of radioactive materials in liquid effluents will'e kept "as low as is reasonably achievable."
This specification implements the requirements of 10 CFR Part 50.36a, General Design Criterion 60 of Appendix A to 10 CFR Part 50 and design objective Section II.D of Appendix I. The limits governing the use of appro-priate portions of the liquid radwaste'reatment system were specified as a suitable fraction of the guide set forth in Section II.A of Appendix I for liquid effluents.
A dose projection which exceeds the stated limit does not necessarily imply that all portions of the liquid radwaste treatment system be used because certain subsystems may have minimal effects on'educing doses.
Specification 3.9.2.1 is provided to ensure that, the dose rate at. any time at, the site boundary from gaseous effluents will be within the annual dose limits of 10
: 3. 9-9
 
el Cl
 
CFR  Part  20  for unrestricted areas.      The annual dose limits  are the doses associated      with the concentrations of  10 CFR  Part 20, Appendix      B, Table  II. These  limits provide reasonable assurance that radioactive material discharged in gaseous effluents will not result in the exposure    of  an individual in    an unrestricted area, to annual average concentrations        exceeding the    limits specified in Appendix B, Table II of 10 CFR Part 20 (10 CFR Part 20.106(b)).        For individuals who may at, times be within the site boundary, these occupancy times will be sufficiently small to compensate for any increase in the atmospheric diffusion factor above that for the site, boundary.
Specification 3.9.2.2 is provided to implement the requirements of Sections II.B, II.C, III.A and IV.A of Appendix    I. The limiting Condition for Operation implements      the guides set forth in Sections II.B and II.C of    Appendix  I. The Specifications provide the required operating        flexibility and  at,  the same  time implement the guides set        forth in Section IV.A of Appendix    I.
The  requirement that the appropriate portions of the gaseous radwaste treatment system and the ventilation exhaust treatment system be used when specified provides reasonable      assurance  that. the releases    of radioactive materials in gaseous effluents will be kept "as low as is reasonably achievable." This specification implements 3.9-10
 
the requirements of  10 CFR Part 50.36a, General Design Criterion 60 of Appendix A  to 10 CFR Part, 50, and design objective Section II.D of Appendix I. The limits governing the use of appropriate portions of the systems were specified as a suitable fraction of the guide set forth in Sections II.B and II.C of Appendix I, 10 CFR Part 50, for gaseous effluents.
A dose  projection which exceeds the stated limit does not necessarily imply that all portions of the gaseous and  ventilation exhaust treatment. systems be used because certain subsystems may have minimal effect    on reducing doses.
Specification 3.9.2.4 is provided to meet, the reporting requirements of 40 CFR 190. Since the plant is well removed from other fuel cycle facilities, it, is suffi-cient to apply the Specification only to the plant.
Specification =-3.9.2.5 is provided to ensure that the concentration of potentially explosive gas mixtures contained in the gas decay tanks are maintained below the flammability limit of oxygen. Naintaining the concentration of oxygen below its flammability limits provides assurance that the releases of radioactive materials will be controlled in conformance with the requirements of General Design Criterion    60 of Appendix A to  10 CFR Part 50.
3.9-11
 
~ P Ill
 
References (1)        FSAR, Section 10.2 (2)        FSAR, Section 2, Appendix 2A (3)        FSAR, Sections 2.6 and 2.7 3.9-12
 
~ l I Radiolo            ical Environmental Monitorin to routine testing of the plant environs.
b'1'pplies
        ~b'o establish          a program which  will assure recognition of changes            in radioactivity or  exposure pathways  in the environs.
        ~f'onitorin Pro ram 3.15.1.a The  radiological environmental monitoring program shall be conducted as specified in Table 3.15-1.
3.15.1.b If the radiological environmental monitoring program is not conducted as specified in Table 3.15-1, prepare and submit to the Commission, in the Annual Radiological Environmental Operating Report, a description of the reasons for not conducting the program as required and the plans for preventing              a recurrence.  (Deviations are permitted from the required sampling schedule                if speci-mens are unobtainable due to hazardous conditions, seasonal unavailability, or to malfunction of automatic sampling equipment.                If the latter, every effort shall be made to complete corrective action prior to the end of the next sampling period.)
3.15.1.c If the      level of radioactivity in an environmental sampling medium at one or more of the locations specified in the ODCN exceeds the reporting levels of-Table 6.9-2 when averaged over any calendar quarter, a report 3.15-1
 
~ J shall  be submitted  to the Commission within 30 days pursuant to Specification 6.9.2.b(5) which includes an evaluation of any release conditions, environmental factors or other aspects which caused the reporting levels of Table 6.9-2 to be exceeded. This report is not required    if                            '1 the measured level of radioactivity was not the result of plant effluents; however, in such an event, the condition shall be reported and described in    .
the Annual Radiological Environmental Operating Report.
3.15.l.d If milk or fresh leafy vegetable samples are unavailable for more than one sample period from one or more of the sampling locations required by the ODCN, prepare and 7
submit to the Commission within 30 days a report which identifies the cause of the unavailability of samples and identifies locations for obtaining replacement samples. If a milk or leafy vegetable sample location becomes unavailable, alternate sample locations within 5 miles of the plant will be reviewed.      The locations from which samples were unavailable may then be deleted from the  ODCN  provided that, the alternate locations are added to the environmental monitoring program.
3.15.2  Land Use Census 3.15.2.a A  land use census shall be conducted and shall identify the location of the nearest. milk animal and the nearest residence in each of the 16 meteorological sectors within a distance of five miles.
3.15-2
 
I 3.15.2.b  If a  land use census    identifies  a location(s) which" yields a calculated dose or dose commitment greater than that of the maximally exposed individual currently being calculated in Specification 4.12.2.2, prepare and submit a report to the Commission within 30 days which identifies the new location(s).
: 3. 15.2. c If a land use census identifies a milk location(s) which yields a calculated dose or dose commitment greater than that at a location from which samples are currently being obtained in accordance with Specifica-tion 3.15.1, prepare and submit a report, to the Com-mission within 30 days which identifies the new location.
The new location shall be added to the radiological environmental monitoring program within 30 days,      if possible. The milk location having the lowest calculated dose  or dose commitment    may be deleted from this monitor-ing program after October      31 of the year in which this land use census    was conducted.
3.15.3    Interlaborator    Com  arison Pro  ram 3.15.3.a  Analyses shall  be performed on    applicable radioactive materials supplied as part of an interlaboratory      com-parison program which has been approved by NRC,      if such a program  exists.
3.15.3.b  If analyses  are not performed as required above, report the corrective actions taken to prevent a recurrence in the Annual Radiological Environmental Operating Report.
3.15-3
 
I Ck
 
Basis The  radiological monitoring program required by this specification provides measurements of radiation and of radioactive materials in those exposure pathways and for those radionuclides which lead to the highest
                                            'I potential radiation exposures of individuals resulting from the station operation. This monitoring program thereby supplements the radiological effluent monitoring program by verifying that the measurable concentrations of radioactive materials and levels of radiation are not higher than expected on the basis of the effluent measurements and modeling of the environmental exposure pathways. The initially specified monitoring program will be effective for at least three years. Following this period,  program changes may be  initiated  based on operational experience.
Specification 3.15.2 is provided to ensure that changes in the use of unrestricted areas are identified and that modifications to the monitoring program are made if  required by the results of this census. A garden census is not required since an onsite garden will be used. This census satisfies the requirements of Section IV.B.3 of Appendix I to 10 CFR Part 50.
The requi'rement  for participation in an interlaboratory comparison  program is provided to ensure that independent checks on the precision and accuracy  of the  measurements of radioactive material in environmental    sample matrices 3.15-4
 
are performed as part of  a quality assurance program for environmental monitoring in order to demonstrate that the results are reasonably valid. Only samples with radioactivity levels comparable to levels in environmental samples need be analyzed.
3.15-5
 
J TABLE 3.15-1 RADIOLOGICAL ENVIRONMENTAL MONITORING PROGRAN Number  of Sam  les Ez osure Pathwa          an                      Sam  lin  and      T  e and  Fre uenc and  or Sam  le  Sam  le Locate.ons          Co  lection  Fre uenc        of  Anal sos
: l. AIRBORNE
: a. Radioiodine  3 on  site                  Continuous operation    Radioiodine canister.
of sampler with sample  Analyze at least once collection at least    per  7  days  for I-131.
once per 7 days.
Cr>    b. Particulates 5 on  site                                          Particulate sampler, 2 off site                                          Analyze for gross beta Ul                                                                            radioactivity > 24 hours Ch                                                                            following filter change.
Perform gamma isotopic analysis on each sample for which gross beta activity is > 10 times the mean of offsite samples. Perform gamma isotopic analysis on composite (by location) sample at least once per 92  days.
2." DIRECT RADIATION                              Film at least. once per Gamma  dose monthly.
month.
or                    or TLD's at  least        Gamma  dose  quarterly.
quarterly.
 
P TABLE 3.15-1 CONTINUED RADIOLOGICAL ENVIRONNENTAL NONITORING PROGRAM Number  of  Sam les Ex osure Pathwa and/or      le and                    Sam lin and      T  e and Fre uenc Sam          Sam  e Locations        Collection Fre  uenc      of Anal sz.s
: 3. WATERBORNE
: a. Surface    1                                                    Gamma  isotopic analysis Inlet  Condenser Water        Composite sample      of each sample. Tritium collected daily over  analysis of sample at a period of < 31 days least once per 92 d'ays.
: b. Drinking    1                              Composite sample col- Gross beta and gamma Ontario Water  District      lected daily over a  isotopic analysis of Intake                        period of < 31 days. each composite sample.
4J                                                                        Tritium analysis of one composite sample at leas Vl I
once per 92 days
 
S TABLE  3.15-1 CONTINUED RADIOLOGICAL ENVIRONMENTAL MONITORING PROGRAM Number  of  Sam  les Ex osure Pathwa                  and                    Sam  lin  and    T  e and  Fre  enc and or Sam le        -Sam  le  Locate.ons        Collection Fre uenc        of Anal    sos
: 4. INGESTION
: a. Milk        3                                At least once per  15 Gamma  isotopic  and June through October              days                  I-131 analysis of each each of 3 farms                                          sample.
1                                At least once per  31 Gamma  isotopic    and November thru May                days.                  I-131 analysis of each one of the farms                                        sample.
: b. Fish          8                                Twice during fishing  Gamma  isotopic analysis Off shore  at. Ginna            season including at    on edible portions    of least four species    each sample.
: c. Food Products 2                                Annual at time of      Gamma  isotopic analysis On  site                          harvest. One sample    on edible portion of of:                    sample.
: 1. apples
: 2. cherries 2                                At time of harvest. I-131 analysis On  site  garden                  One sample  of:
: 1. broad leaf vegetation
: 2. squash
 
~P J
 
4.0  SURVEIIIANCE RE UIREPIENTS Specified intervals            may be  adjusted plus or minus  25%  to accommodate normal test schedules.
4.1  0    erational Safet          Review
      ~l.''1'pplies to items directly related to safety limits        and limiting conditions for operation.
      ~b'o specify the minimum frequency            and type of surveillance to be applied to plant equipment                and conditions.
              'f'alibration, 4.1.1                        testing, and checking of analog channel and testing of logic channel shall be performed as specified in    Table 4.1-1.
4.1.2 Equipment and sampling              tests shall be conducted as specified in Table 4.1-2.
4.1.3 Each radioactive effluent monitoring instrumentation channel shall be demonstrated operable by performing the channel check, source check, channel functional test, and channel calibration at the frequency shown in Table 4.1-3.
Basis:
Check Failure such as blown instrument fuses, defective in-dicators, faulted amplifiers which r'esult in "upscale" or "downscale" indication can be easily recognized by simple observation of the functioning of an instrument or system.
Furthermore,            such  failures are, in    many cases,  revealed 4.1-1
 
4 C
 
TABLE 4.1-1 (CONTINUED)
Channel Check  Calibrate          Test          Remarks
: 10. Rod Position Bank      S(1,2)  N.A.          N.A;    1) Each  six inches of rod motion Counters                                                  when data logger is out of service
: 2) With analog rod position
: 11. Steam Generator Level            R
: 12. Charging Flow          N.A. R            N.A.
: 13. Residual Heat Removal  N.A.                  N.'A.
Pump Flow
: 14. Boric Acid Tank Level  D        R            N.A.        Bubbler tube rodded weekly
: 15. Refueling Water Storage N.A. R            N.A.
Tank Level Volume Control Tank    N.A.                  N.A.
Level Reactor Containment    D                      M(1)    1) Isolation Valve signal Pressure
: 18. Radiation Monitoring    D                                  Area Monitors Rl  to R9 System                                                    System Monitors R16, R17, and R20
: 19. Boric Acid Control      N.A. R            N.A.
: 20. Containment Drain      N.A. R            N.A.
Sump Level
: 21. Valve Temperature      N.A. N.A.
Interlocks
: 22. Pump-Valve Interlock            N.A.          N.A.
: 23. Turbine Trip Set-Point, N.A. R            M(1)    1) Block  trip
: 24. Accumulator Level and            R            N.A.
Pressure
 
k Radiolo        ical Environmental Monitorin
~1''1'                  ppl'                      '
1 pl environs.
~b'              -*      bl'        pl'      ~      ly '
g which        will assure recognition of  changes    in radioactivity in the environs.
      '1'he radiological environmental monitoring samples shall be collected pursuant to Table 3.15-1. Acceptable locations are shown in the ODCM. Samples shall be analyzed pursuant to the requirements of Tables 3.15-1 and 4.10-1.
A  land use census shall be conducted annually (between June        1 and October  1).
Basis The environmental        survey has been designed to utilize the knowledge about dilution in the atmosphere and in the lake which has been gained during the pre-operational and  operational period of study.
The  radiological monitoring program provides measurements of radiation and of radioactive materials in those pathways and for those radionuclides which    'xposure lead to the highest potential radiation exposures of individuals resulting from the station operation. This monitoring program thereby supplements the radiological effluent monitoring program by verifying that the 4.10-1
 
k measurable  concentrations of radioactive materials and levels of radiation are not higher than expected on the basis of the effluent measurements and modeling of the environmental exposure pathways.
The detection capabilities required by Table 4.10-1 are state-of-the-art for routine environmental measurements in industrial laboratories. The specified lower limits of detection for I-131 in water, milk, and other food products correspond to approximately one-quarter of the Appendix I to 10 CFR Part 50 design objective dose-equivalent of 15 mrem/year for atmospheric releases and 10 mrem/year for liquid releases to the maximally exposed organ and   individual.


==Reference:==
==Reference:==


FSAR-Section 2.10 4.10-2 I
FSAR   Section 2.10 4.10-2
TABLE 4.10-1 NAXINUN VALUES FOR THE LOWER LINITS OF DETECTION (LLD)~To be achieved on 98%of analyses Water Analysis (pCi/1)gross beta 4 Airborne Particulate or Gay (pCi/m)1 X 10 Fish.Nilk (pCi/kg, wet)(pCi/1)Food Products (pCi/kg,wet)
 
H 54 Nn 59 Fe 5'60Co 95Zr-M 131I 4, Ba-La 2000 (1000)15 30 1 15(10),18 15 7 X 10 1 X 10 130 260 13Q 130 15 15 60 60 I
I TABLE 4.10-1 NAXINUN VALUES FOR THE LOWER LINITS OF DETECTION (LLD)
TABLE 4.10-1 CONTINUED TABIE NOTATION a-The LLD is the smallest concentration of radioactive material in a sample that will be detected with 95%probability with only 5%probability of falsely concluding its presence.For a particular measurement system (which may include radio-chemical separation):
                              ~
4.66 s E.V.2.22.Y.exp(-Aht)where LLD is the lower limit of detection as defined above (as pCi per unit mass or volume)S is the standard deviation of the background counting ate or of the counting rate of a blank sample as appropriate (as counts per minute).'is the counting efficiency (as counts per transformation)
To be achieved on 98% of analyses Airborne Particulate Water           or Gay              Fish.          Nilk  Food Products Analysis   (pCi/1)         (pCi/m )         (pCi/kg, wet)   (pCi/1) (pCi/kg,wet) gross beta  4              1 X 10 H          2000 (1000  )
V is the sample size (in units of mass or volume)2.22 is the number of transformations per minute per picocurie Y is the fractional radiochemical yield (when applicable)
54             15                                130 Nn 59             30                                260 Fe 5'60Co                                           13Q 95Zr-M 131I           1            7 X 10                                          60 4,         15(10 ),18   1 X 10               130             15       60 Ba-La      15                                                15
A, is the radioactive decay constant for the particular radionuclide b,t is the elapsed time between sample collection and analysis The value of s used in the calculation of the ILD for a detection system shall be based on the actual observed'ariance of the background counting rate or of the counting rate of the blank samples (as appropriate) rather than on an unverified theoretically predicted variance.In calculating the LLD for a radionuclide determined by gamma-ray spectrometry, the back-ground shall include the typical contributions of other radio-nuclides normally present in the samples (e.g., potassium-40 in milk samples).Typical values of E, V, Y and bt should be used in the calculations.
Analyses shall be performed in such a manner that the stated LLDs will be achieved under routine conditions..
Occasionally background fluctuations, unavoidably small sample sizes, the presence of interferring nuclides, or other uncontrollable cir-cumstances.
may-render these LLDs unachievable.
In such cases, the contributing factors will be identified and described in the Annual Radiological Environmental Operating Report.4.10-4 J 4 TABLE 4.10-1 CONTINUED TABLE NOTATION The LLD is defined as an a riori (before the fact)limit representing the capability o a measurement system and not 2''(f h f)I''5~'I measurement.
b-LLD for drinking water.c-Total for parent and daughter.4.10-5 J 4
~4.12 Effluent Surveillance A licabilit, 4.12.1 Applies to the periodic test, and record requirements of the plant effluents.
~b To ascertain that radioactive liquid and gaseous releases from the plant are within allowable limits.S ecifications Liquid Effluents 4.12.1.1 Concentration 4.12.1.1.a The concentration of radioactive material at any time in'liquid'ffluents released from the site shall be continuously monitored in accordance with Table 3.5-4.4.12.1.1.b The liquid effluent continuous monitors listed in I.Table 3.5-4 having provisions for automatic termina-h tion of liquid releases shall be used to limit the concentration of radioactive material released at.any time from the site to the values given in Specification 3.9.1.l.a.
4.12.l.l.c The radioactivity content, of each batch of radioactive liquid waste to be discharged shall be-determined prior to release by sampling and analysis in accordance with Table 4.12-1.The results of pre-release analyses shall be used with the calculational methods in the ODCN to assure that the concentration at the point of release is limited to the values in-Specification 3.9.1.l.a.
4.12-1' J I I 4.12.1.1.d Post,-release analyses of samples composited from batch r'eleases shall be performed in accordance with Table 4.12-1.The results of the post,-release analyses shall be used with the calculational methods in the ODCM to assure that the dose commitments from liquids were limited to the values in Specification 3.9.1.2.a.
4.12.1.2 4.12.1.2.a Dose Cumulative dose contributions from liquid effluents shall be determined in accordance with the Offsite Dose Calculational Manual (ODCM)at least once per 31 days.4.12.1.3 Liquid Waste Treatment 4.12.1.3.a Doses due to liquid releases to unrestricted areas shall be projected at least once per 31 days.4.12.2 Gaseous Wastes 4.12.2.1 Release Rate 4.12.2.1.a The release rate, at.any time, of noble gases in gaseous effluents shall be controlled as established in Specification 3.9.2.1.4.12.2.1.b The gas effluent continuous monitors as listed in Table 3.5-4 having provisions for the automatic termina-tion of gaseous releases, shall be used to limit releases within the values established in Specification 3.9.2.1 when monitor setpoint values are exceeded.4.12-2


4.12.2.1.c The release rate of radioactive materials, other than noble gases, in gaseous effluents shall be determined by obtaining representative samples and performing analyses in accordance with the sampling and analysis program, specified in Table 4.12-2.4.12.2.2 Dose (10 CFR Part, 50, Appendix I)4.12.2.2.a Cumulative dose contributions for the total time period shall be determined in accordance with the Offsite Dose Calculation Nanual (ODCN)at least once every 31 days.4.12.2.3 Gaseous Waste Treatment 4.12.2.3.a Doses due to gaseous releases to unrestricted areas shall be projected at least once per 31 days.4.12.2.4 Dose (40 CFR Part 190)4.12.2.4.a If required by Specification 3.9.2.4 cumulative dose contributions from liquid and gaseous effluents shall be determined in accordance with the Offsite Dose Calculational Nanual.4.12.2.5 Explosive Gas Nixture 4.12.2.5.a The concentration of oxygen in waste gas system shall be monitored as required by Table 3.5-4.4.12-3 A
I TABLE 4.10-1   CONTINUED TABIE NOTATION a - The LLD   is the smallest concentration of radioactive material in a sample that will be detected with 95% probability with only 5% probability of falsely concluding its presence.
Basis: Sufficient tests will be made to be certain that, radio-active materials are not released to the environment in quantities greater than allowable.
For a particular measurement system (which may include radio-chemical separation):
Installed radia-tion monitoring equipment in the plant will be used in conjunction with laboratory analyses to maintain sur-veillance of normal effluents.
4.66 s E . V . 2.22   . Y . exp(-Aht) where LLD is the lower limit of detection as defined above (as pCi per unit mass or volume)
Sufficient records will be maintained to determine the concentration of radioactive materials in unrestricted areas.Isotopic analysis of representative samples will serve to verify the accuracy of routine samples by identification of significant energy peaks.4.12-4
is the standard deviation of the background counting ate or of the counting rate of a blank sample as appropriate (as counts per minute).'
)i' TABLE 4.12-1 RADIOACTIVE LIQUID WASTE SAHPLING AND ANALYSIS PROGRAH Batch Waste Release Tanks P Each Batch Sampling Liquid Release Type Frequency Hinimum Type of Activity Lower Limit Analysis Analysis of Detection Frequency (LLD)(uCi/ml)-7 b P 1.Principa)Gamma 5 x 10 Each Batch Emitters and-6 I-131 1x10 or 2.Gross Beta:" P One Batch/51 Dissolved and Entrained Gases (Gamma Emitters)1 x 10 P H Each Batch Composite c Gross alpha P-32 1x10 1x10 1 x 10 P e Each Batch Composite Sr-89, Sr-90 c Fe-55 5x10-6 1x10-If gross beta is performed for batch releases, then a weekly composite shall also be analyzed for Principal Gamma Emitters and I-131.4.12-5 I L TABLE 4.12-1 CONTINUED TABLE NOTATION The LLD is the smallest concentration of radioactive material in a sample that will be detected with 95%probability with S%probability of falsely concluding that, a blank observation representa a"real" signal.For a particular measurement system (which may include radiochemical separation):
is the counting efficiency (as counts per transformation)
LLD=4.66sb E.V.2.22 x 10.Y.exp-Ab,t)where LLD is the lower limit of detection as defined above (as uCi per unit mass or volume)s is the standard deviation of the background counting r te or of the counting rate of a blank sample as appropriate (as counts per minute)E is the counting efficiency (as counts per transforma-tion)V is the sample size (in units of mass or volume)2.22 x 10 is the number of transformations per minute per microcurie Y is the fractional radiochemical yield (when applicable)
V is the sample size (in units of mass or volume) 2.22 is the number of transformations per minute per picocurie Y is the fractional radiochemical yield (when applicable)
A.is the radioactive decay constant for the particular radionuclide ht is the elapsed time between midpoint of sample col-lection and time of counting (for plant effluents, not environmental samples).The value of s used in the calculation of the LLD for a detection system shall be based on the actual observed variance of the background counting rate or of the counting rate of the blank samples (as appropriate) rather than on an unverified theoretically predicted variance.In calculating.the LLD for a radionuclide determined by gamma-ray spectrometry, the background shall include the typical contributions of other radionuclides normally present in the samples.Typical values of E, V, Y and ht should be used in the calculation.
A, is the radioactive   decay constant for the particular radionuclide b,t is the elapsed time between sample collection and analysis The value of s used in the calculation of the ILD for a detection system shall be based on the actual observed'ariance of the background counting rate or of the counting rate of the blank samples (as appropriate) rather than on an unverified theoretically predicted variance. In calculating the LLD for a radionuclide determined by gamma-ray spectrometry, the back-ground shall include the typical contributions of other radio-nuclides normally present in the samples (e.g., potassium-40 in milk samples). Typical values of E, V, Y and bt should be used in the calculations.
4.12-6
Analyses shall be performed in such a manner that the stated LLDs will be achieved under routine conditions.. Occasionally background fluctuations, unavoidably small sample sizes, the presence of interferring nuclides, or other uncontrollable cir-cumstances. may -render these LLDs unachievable. In such cases, the contributing factors will be identified and described in the Annual Radiological Environmental Operating Report.
4.10-4


The background count rate is calculated from the background counts that are determined to be within+one FWHN energy band about the energy of the gamma ray peak used for the quantitative analysis for this radionuclide.
J 4 TABLE 4.10-1  CONTINUED TABLE NOTATION 2''(f The LLD is defined as an a representing the capability measurement.
It should be recognized that the LLD is defined as an a priori (before the fact)limit representing the capability f@*5~(f h fact)limit for a particular measurement.
f   )I''5             'I riori (before the fact) limit o a measurement system and not
Analyses shall be performed in such a manner that the stated LLDs will be achieved under routine conditions.
                                                    ~
Occasionally background fluctuations, unavoidably small sample sizes, the presence of interferring nuclides, or other uncontrollable circumstances may render these LLDs unachievable.
b - LLD for drinking water.
When circumstances result in LLDs higher than required, the reasons shall be documented in the Semiannual Radioactive Effluent, Report.For certain radionuclides with low gamma yield or low energies, or for certain radionuclide mixtures, it may not be possible to measure radionuclides in concentrations near the LLD.Under these circumstances, the LLD may be increased inversely propoPionally.to the magnitude of the gamma yield (i.e., 5 x 10/I, where I is the photon abundance expressed as a decimal fraction), but in no case shall the LLD, as calculated in this manner for a specific radionuclide, be greater than 10%of the NPC value specified in 10 CFR 20, Appendix 8, Table II, Column II.A composite sample is one in which the quantity of liquid sampled is proportional to the quantity of liquid waste dis-charged and in which the method of sampling employed results in a specimen which is representative of the liquids released.The principal gamma emitters for which the LLD specification will apply are exclusively the following radionuclides:
c  Total for parent and daughter.
Nn-54, Fe-59, Co-58, Co-60, Zn-65, Cs-134, Cs-137, and Ce-141.This list does not mean that, only these nuclides are to be detected and reported.Other peaks which are measurable and identifiable, together with the above nuclides, shall also be identified and reported.Nuclides which are below the LLD for the analyses should be reported as less than the LLD and should not be reported as being present at the LLD level.The less than values should not be used in the required dose calculations.
4.10-5
When unusual circumstances result in LLD's higher than required, the reasons shall be documented in the semiannual Radioactive Effluent Release Report.4.12-7


TABLE 4.12-2 RADIOACTIVE GASEOUS WASTE SAMPLING AND ANALYSIS PROGRAM Gaseous Release Type Sampling Frequency Minimum Analysis Frequency Type of Activity Analysis Lower Limit of Detection fLLD)(uCi/ml)A.Gas Decay Tank P Each Tank Grab Sample P Each Tank Principal Gamma Emitters 1 x 1.0 Auxiliary Building Ventilation Grab Sam le Principal Gamma Emitters D.Air Ejector Iran Sam le E.All Releases Types Continuous as listed in B and C above M'c Charcoal Sam le Principle Gamma Emitters H-3 I-131 I-133 cd P c~f B.Containment Purge Each Purge'ach Purge Principal Gamma Emitters Grab Sam le H-3 1 x 10 1 x 10 10-4b-6=4b 1x10 1 x 10 1 x 10 1 x 10 Continuous Continuous W P Particulate Principal Gamma Emitters Sample (I-131, Others)M Gross alpha Composite Particulate Sam le 1 x 10-1.1 1 x 10 Continuous Q Composite Particulate Sample Sr-89, Sr-90 1 x 10
J 4


5.5 5.5.1 5.5.2 5.5.3 Waste Treatment Systems Radioactive Liquid Waste Treatment The liquid waste treatment system consists of a'aste Holdup Tank, a Waste Evaporator, a mixed bed de-mineralizer and the Reverse Osmosis unit.Portions.of the system may be bypassed and still meet the release limits.Gaseous Radwaste Treatment The gaseous radwaste treatment system consists of four (4)'Gas Decay Tanks and two (2)gas compressors.
~ 4. 12      Effluent Surveillance A  licabilit, Applies to the periodic test, and record requirements of the plant effluents.
Only one compressor and three Gas Decay Tanks are necessary to the system.Ventilation Exhaust System The ventilation exhaust is treated to reduce gaseous radioiodine and material in particulate form by passing through charcoal adsorbers and/or HEPA filters.This system has no effect on noble gas effluents.
            ~b To  ascertain that radioactive liquid and gaseous releases from the plant are within allowable limits.
The com-ponents of the ventilation exhaust system are: Auxiliary Building HEPA filters Auxiliary Building"G" Charcoal&HEPA filters Auxiliary Building"A" Charcoal Adsorbers Containment Purge Charcoal 8 HEPA filters 5.5-1  
S  ecifications 4.12.1    Liquid Effluents 4.12.1.1   Concentration 4.12.1.1.a The concentration of radioactive material at any time in 'liquid'ffluents released from the site shall be continuously monitored in accordance with Table 3.5-4.
4.12.1.1.b The liquid effluent continuous monitors listed in I.
Table 3.5-4 having provisions for automatic termina-h tion of liquid releases shall be used to limit the concentration of radioactive material released at .any time from the site to the values given in Specification 3.9.1.l.a.
4.12.l.l.c The radioactivity content, of each batch of radioactive liquid waste to be discharged shall be -determined prior to release by sampling and analysis in accordance with Table 4.12-1. The results of pre-release analyses shall be used with the calculational methods in the ODCN to assure that the concentration at the point of release is limited to the values in- Specification 3.9.1.l.a.
4.12-1'


AUDITS (Continued) g.The Facility Fi.re Prote'ction Program and implement-ing procedures at least once per two years.h.', An independent fire protection and loss prevention program inspection and audit performed at least once per 12 months utilizing either qualified offsite licensee personnel or an outside fire pro-tection firm.i.An inspection and audit of the fire protection and loss prevention program performed by non-licensee personnel at least once per 36 months.The personnel may be representatives of ANI, an insurance brokerage firm, or other qualified individuals.
J  I I
j.The radiological environmental monitoring program and the results thereof at least once per 12 months.k.The Offsite Dose Calculation Manual and implementing procedures at least once per 24 months.l.Any other area of facility.operation considered appropriate by the NSARB or the Vice President, Electric and Steam Production.
6.5-10 I J AUTHORITY 6.5.2.9 a.The chairman of the Nuclear Safety Audit and Review Board is responsible to the Executive Vice President on all activities for which the review board is responsible.
b.The NSARB shall report to and advise the Vice President, Electric and Steam Production, on those areas of responsibility specified in Sections 6.5.2.7 and 6.5.2.8.RECORDS 6.5.2.10 Records of NSARB activities shall be prepared, approved, and distributed as indicated below: 6.5-10a


6.8 6.8.1 6.8.2 6.8.3 PROCEDURES Nritten procedures shall be est bl'd, a xs e , implemented, and mao.ntained covering the activities referenced below: a.The applicable procedures recommended in Appendix"A", of Regulatory Guide 1.33, November 1972.b.Refueling operations.
4.12.1.1.d Post,-release analyses of samples composited from batch r'eleases shall be performed in accordance with Table 4.12-1. The results of the post,-release analyses shall be used with the calculational methods in the ODCM to assure that the dose commitments from liquids were limited to the values in Specification 3.9.1.2.a.
c.Surveillance and test activities of safety related equipment.
4.12.1.2  Dose 4.12.1.2.a Cumulative dose contributions from liquid effluents shall be determined in accordance with the Offsite Dose Calculational Manual (ODCM) at least once per 31 days.
d.Security Plan implementation.
4.12.1.3  Liquid Waste Treatment 4.12.1.3.a Doses due to liquid releases to unrestricted areas shall be projected at least once per 31 days.
e.Emergency Plan implementation.
4.12.2    Gaseous Wastes 4.12.2.1  Release Rate 4.12.2.1.a The release rate, at. any time, of noble gases in gaseous  effluents shall be controlled as established in Specification 3.9.2.1.
f.Fire Protection Program implementation.
4.12.2.1.b The gas effluent continuous monitors as listed in Table 3.5-4 having provisions for the automatic termina-tion of gaseous releases, shall be used to limit releases within the values established in Specification 3.9.2.1 when monitor setpoint values are exceeded.
g.The radiolo ic g'l environmental monitoring program.h.Offsite ite releases of gaseous and liquid effluents containing radioactive materials.
4.12-2
 
4.12.2.1.c The  release rate of radioactive materials, other than noble gases, in gaseous effluents shall be determined by obtaining representative    samples  and  performing analyses in accordance with the sampling and analysis program, specified in Table 4.12-2.
4.12.2.2  Dose (10 CFR Part, 50, Appendix I) 4.12.2.2.a Cumulative dose contributions for the total time period shall be determined in accordance with the Offsite  Dose Calculation Nanual  (ODCN)  at least  once every 31 days.
4.12.2.3  Gaseous  Waste Treatment 4.12.2.3.a Doses due  to gaseous releases to unrestricted areas shall be projected at least once per 31 days.
4.12.2.4  Dose (40 CFR Part 190) 4.12.2.4.a If required by Specification 3.9.2.4 cumulative dose contributions from liquid and gaseous effluents shall be determined in accordance with the Offsite Dose Calculational Nanual.
4.12.2.5  Explosive Gas Nixture 4.12.2.5.a The concentration of oxygen in waste gas system shall be monitored as required by Table 3.5-4.
4.12-3
 
A Basis:
Sufficient tests will be  made to be certain that, radio-active materials are not released to the environment in quantities greater than allowable. Installed radia-tion monitoring equipment in the plant will be used in conjunction with laboratory analyses to maintain sur-veillance of normal effluents.
Sufficient records will be maintained to determine the concentration of radioactive materials in unrestricted areas. Isotopic analysis of representative samples will serve to verify the accuracy of routine samples by identification of significant energy peaks.
4.12-4
 
)i' TABLE  4.12-1 RADIOACTIVE LIQUID WASTE SAHPLING AND ANALYSIS PROGRAH Sampling      Hinimum      Type  of Activity    Lower Limit Liquid Release Type      Frequency    Analysis          Analysis        of Detection Frequency                            (LLD)
(uCi/ml)
                                                                                  -7 b Batch Waste                  P              P        1. Principa)  Gamma  5 x 10 Release Tanks          Each Batch    Each Batch        Emitters  and I-131            1x10 -6 or
: 2. Gross Beta:"
P                      Dissolved and        1 x 10 One Batch/51                Entrained Gases (Gamma  Emitters) 1x10 P              H c
Each Batch    Composite Gross alpha          1x10 P-32                  1 x 10 P              e c
Each Batch    Composite    Sr-89, Sr-90          5x10 Fe-55                1x10 -6
-If gross  beta is performed for batch releases, then        a weekly composite shall also  be analyzed  for Principal Gamma Emitters      and  I-131.
4.12-5
 
I L TABLE  4.12-1    CONTINUED TABLE NOTATION The LLD  is the smallest concentration of radioactive material in  a sample  that will be detected with 95% probability with S% probability  of falsely concluding that, a blank observation representa a "real" signal.
For a particular measurement system (which may include radiochemical separation):
LLD =          4.66sb E . V  . 2.22 x 10    . Y . exp -Ab,t) where LLD  is the lower limit of detection as defined above (as uCi per  unit mass or volume) s is the standard deviation of the background counting r te or of the counting rate of a blank sample as appropriate (as counts per minute)
E is the counting efficiency (as counts per transforma-tion)
V is the  sample size    (in units of mass or volume) 2.22 x 10    is the number of transformations per minute per microcurie Y is the fractional radiochemical yield      (when applicable)
A. is the radioactive  decay constant for    the particular radionuclide ht is the elapsed time between midpoint      of sample col-lection and time of counting (for plant      effluents, not environmental samples).
The value of s used in the calculation of the LLD for a detection system shall be based on the actual observed variance of the background counting rate or of the counting rate of the blank samples (as appropriate) rather than on an unverified theoretically predicted variance. In calculating
.the LLD for a radionuclide determined by gamma-ray spectrometry, the background shall include the typical contributions of other radionuclides normally present in the samples. Typical values of E, V, Y and ht should be used in the calculation.
4.12-6
 
The background  count rate is calculated from the background counts that are determined to be within + one FWHN energy band about the energy of the gamma ray peak used for the quantitative analysis for this radionuclide.
f                  @*5~(f It should be recognized that the LLD is defined as an a priori (before the fact) limit representing the capability fact) limit for a particular measurement.
h Analyses shall be performed in such a manner that the stated LLDs will be achieved under routine conditions. Occasionally background fluctuations, unavoidably small sample sizes, the presence of interferring nuclides, or other uncontrollable circumstances may render these LLDs unachievable. When circumstances result in LLDs higher than required, the reasons shall be documented in the Semiannual Radioactive Effluent, Report.
For certain radionuclides with low gamma yield or low energies, or for certain radionuclide mixtures,    it may not be possible to measure radionuclides in concentrations near the LLD.
Under these circumstances, the LLD may be increased inversely propoPionally .to the magnitude of the gamma yield (i.e., 5 x 10 /I, where I is the photon abundance expressed as a decimal fraction), but in no case shall the LLD, as calculated in this manner for a specific radionuclide, be greater than 10% of the NPC value specified in 10 CFR 20, Appendix 8, Table  II,  Column II.
A  composite sample  is one in which the quantity of liquid sampled  is proportional to the quantity of liquid waste dis-charged and in which the method of sampling employed results in a specimen which is representative of the liquids released.
The principal gamma emitters for which the LLD specification will apply are exclusively the following radionuclides:
Nn-54, Fe-59, Co-58, Co-60, Zn-65, Cs-134, Cs-137, and Ce-141. This    list does not mean that, only these nuclides are to be detected and reported. Other peaks which are measurable and identifiable, together with the above nuclides, shall also be identified and reported. Nuclides which are below the LLD for the analyses should be reported as less than the LLD and should not be reported as being present at the LLD level. The less than values should not be used in the required dose calculations. When unusual circumstances result in LLD's higher than required, the reasons shall be documented in the semiannual Radioactive Effluent Release Report.
: 4. 12-7
 
TABLE  4.12-2 RADIOACTIVE GASEOUS WASTE SAMPLING AND ANALYSIS PROGRAM Minimum                                        Lower Limit of Sampling      Analysis                Type of              Detection fLLD)
Gaseous  Release Type    Frequency      Frequency        Activity Analysis              (uCi/ml)
P            P A. Gas Decay Tank        Each Tank      Each Tank        Principal  Gamma Emitters    1 x  1.0 Grab Sample B. Containment Purge Grab
                                      'ach Each Purge cd P
Purge c    Principal  Gamma Emitters f
                                                                              ~
1 x 10 Sam  le                          H-3                            1 x 10 Auxiliary Building                                    Principal  Gamma Emitters          10-4b Ventilation          Grab                                                                    -6 Sam  le                                                                =4b D. Air Ejector                                            Principle  Gamma Emitters    1x10 Iran              M'c Sam  le                          H-3                            1 x 10 E. All Releases  Types  Continuous                        I-131                        1 x 10 as  listed in B and                Charcoal C  above                            Sam le            I-133                        1 x 10 Continuous        W            P Particulate      Principal Gamma Emitters Sample            (I-131, Others)              1 x 10-1.1 Continuous        M              Gross alpha                  1 x 10 Composite Particulate Sam le Continuous        Q              Sr-89, Sr-90                  1 x 10 Composite Particulate Sample
 
5.5    Waste Treatment Systems 5.5.1  Radioactive Liquid Waste Treatment The liquid waste treatment system consists of        a'aste Holdup Tank,  a Waste  Evaporator,  a  mixed bed de-mineralizer  and  the Reverse Osmosis unit.      Portions
      . of the  system may be bypassed  and    still  meet the release  limits.
5.5.2  Gaseous  Radwaste Treatment The gaseous  radwaste treatment system consists      of four (4)'Gas Decay Tanks and two (2) gas compressors.          Only one compressor and three Gas Decay Tanks are necessary to the system.
5.5.3  Ventilation Exhaust    System The  ventilation exhaust is treated to reduce        gaseous radioiodine and material in particulate form        by passing through charcoal adsorbers and/or HEPA filters. This system has no effect on noble gas effluents. The com-ponents of the    ventilation exhaust    system are:
Auxiliary Building HEPA filters Auxiliary Building "G" Charcoal & HEPA filters Auxiliary Building "A" Charcoal Adsorbers Containment Purge Charcoal    8 HEPA  filters 5.5-1
 
AUDITS (Continued)
: g. The  Facility  Fi.re Prote'ction Program and implement-ing procedures at least once per two years.
h.', An independent fire protection and loss prevention program inspection and audit performed at least once per 12 months utilizing either qualified offsite licensee personnel or an outside fire pro-tection firm.
: i. An  inspection and audit of the fire protection and loss prevention program performed by non-licensee personnel at least once per 36 months. The personnel may be representatives    of ANI, an insurance brokerage firm, or other qualified individuals.
: j. The radiological environmental monitoring program and the results thereof at least once per 12 months.
: k. The  Offsite  Dose  Calculation Manual and implementing procedures at least once per 24 months.
: l. Any other area of facility. operation considered appropriate by the NSARB or the Vice President, Electric and Steam Production.
6.5-10
 
I J AUTHORITY 6.5.2.9  a. The chairman  of the Nuclear Safety Audit and Review Board is responsible to the Executive Vice President on all activities for which the review board is responsible.
: b. The NSARB  shall report to and advise the Vice President, Electric and Steam Production, on those areas of responsibility specified in Sections 6.5.2.7 and 6.5.2.8.
RECORDS 6.5.2.10  Records  of NSARB activities shall be prepared, approved, and distributed as indicated below:
6.5-10a
 
6.8  PROCEDURES 6.8.1 Nritten procedures shall     be est a bl'xs e d,, implemented, and mao.ntained   covering the activities referenced below:
: a. The   applicable procedures recommended in Appendix "A", of Regulatory Guide 1.33, November 1972.
: b. Refueling operations.
: c. Surveillance and test activities of safety related equipment.
: d. Security Plan implementation.
: e. Emergency Plan implementation.
: f. Fire Protection     Program implementation.
: g. The           g'l radiolo ic environmental monitoring program.
: h. Offsiteite releases of gaseous and liquid effluents containing radioactive materials.
Offsite Dose Calculation Manual implementation.
Offsite Dose Calculation Manual implementation.
Each procedure and administrative policy of 6.8.1 above, and changes thereto, shall be reviewed by the PORC and approved by the Station Superintendent prior to imple-mentation and reviewed periodically as set forth in the applicable procedures.
6.8.2 Each procedure and administrative policy of 6.8.1 above, and changes thereto, shall be reviewed by the PORC and approved by the Station Superintendent prior to imple-mentation and reviewed periodically as set forth in the applicable procedures.
Temporary changes to procedures of 6.8.1 above may be made provided: a.The intent of the original procedure is not, altered.b.The chan hange is approved by two members of the plant management staff, at least one of whom is the Shift Foreman who holds a S enior Reactor Operator's License.6.8-1 l
6.8.3 Temporary changes to procedures of 6.8.1 above may be made provided:
c.The change is documented, reviewed by the PORC, and approved by the Station Superintendent within 10 days of implementation.
: a. The intent of the original procedure is not, altered.
6.8-2  
: b. The chanhange is approved by two members of the plant management staff, at least one of whom is the Shift Foreman who holds a S enior Reactor Operator's License.
6.8-1
 
l
: c. The change is documented, reviewed by the PORC, and approved by the Station Superintendent within 10 days of implementation.
6.8-2
 
6.9    Re  ortin    Re uirements In addition to the 'applicable reporting requirements of Title 10, Code of Federal Regulations, the following identified reports shall be submitted to the Director of the appropriate Regional Office of Inspection and Enforcement unless otherwise noted.
6.9.1  Routine Reports 6.9.1.1 Startu    Re  ort. A summary report of plant startup and power escalation testing shall be submitted following (1) receipt of an operating license, (2) amendment to the license involving a planned increase in power level, (3) installation of fuel that has a different design or has been manufactured by a different fuel supplier, and (4) modifications that may have sig-nificantly altered the nuclear, thermal, or hydraulic performance of the plant. The report shall address each of the tests performed and shall in general include a description of the measured values of the operating conditions or characteristics obtained dur-ing the test program and a comparison of these values with design predictions and specifications. Any corrective actions that. were required to obtain satis-factory operation shall also be described. Any addi-
                                                \
tional specific details required in license conditions 4
based on other commitments shall be included in this report.
6.9-1
 
Startup reports shall be submitted within (1) 90 days following completion of the startup test program, or (2)  90 days  following resumption of commercial power operation, whichever is earliest. If the Startup Report does not cover both events (i.e., completion of startup test program, and resumption of commercial power operation), supplementary reports shall be sub-mitted at least every three months until both events have been completed.
Nonthl  0  eratin  Re  ort.. Routine reports of operating statistics  and shutdown experience  shall be submitted on a  monthly basis to the Director, Office of Nanagement Information and Program Control, U.S. Nuclear Regulatory Commission, Washington, D.C. 20555 by the fifteenth of each .month following the calendar month covered by the report. The monthly report shall include a narrative summary of operating experience describing the operation of the facility, including major safety related main-tenance for the monthly period, except that safety related maintenance performed during tne refueling outage may be reported in the monthly report for the month following the end of the outage rather than each month during the outage.
Annual Radiolo    ical  Environmental 0 eratin  Re ort Routine radiological environmental reports covering the operation of the unit during the previous calendar year shall be submitted prior to Nay    1 of  each year.
6.9-2
 
The annual  radiological environmental reports shall include summaries, =interpretations, and analysis of trends of the results of the radiological environ-mental surveillance activities for the report period, including a comparison with preoperational studies, operational controls (as appropriate}, and previous environmental surveillance reports and an assessment.
of the observed impacts of the plant operation on the environment. The reports shall also include the results of land use censuses as required.
The annual  radiological environmental reports shall include summarized and tabulated results in the format of Table 6.9-1 of all radiological environmental samples taken during the report. period. In the event that some results are not available for inclusion with the report, the report shall be submitted noting and explaining the reasons for the missing results. The missing data shall be submitted as soon as possible in a supplementary report.
The  reports shall also include the following: a summary description of the radiological environmental monitoring program including a map of all sampling locations keyed to a table giving distances and direc-tions from the reactor, and the results of the participa-tion in  an interlaboratory comparison program.
6.9-3
 
Note:    Routine'surveillance testing, instrument calibration, or preventative maintenance which require system configurations as described in items 2.b(l) and 2.b(2) need not be reported except where test, results
        .themselves reveal a degraded mode as de-scribed above.
(3)  Observed inadequacies  in the implementation of administrative or procedural controls which threaten to cause reduction of degree of re-dundancy provided in reactor protection systems or engineered safety feature systems.
(4) Abnormal degr'adation of systems other than those specified in items 2.a(3) above designed to contain radioactive material resulting from the fission process.
Note:  Sealed sources or  calibration sources are not included under this item. Leakage of packing or gaskets within the limits'alve for identified leakage set, forth in technical specifications need not be reported under this item.
(5) Measured levels of radioactivity in an environ-mental sampling medium determined to exceed the reporting level values of Table 6.9-2 when averaged over any calendar quarter sampling period. When more than one of the radionuclides 6.9-7
 
in Table 6.9-2 are'etected in the sampling medium, this report shall be submitted if:
concentration (1 + concentration 2 + ....) 1.0 lxmxt eve      1      xmas.t evel 2 When radionuclides other than those in Table 6.9-2 are detected and are the result of plant effluents, this report shall be submitted  if  the potential annual dose to an individual is equal to or greater than the calendar year limit of Specifications 3.9.1.2.a or 3.9.2.2.a. This re-port. is not required if the measured level of radioactivity was not the result of plant efflu-ents; however, in such an event, the condition shall be reported and described in the Annual Radiological Environmental Monitoring Report.
6.9.3  Uni ue  Re  ortin  Re uirements 6.9.3.1 Annually:    Results of required leak tests performed on sources  if  the tests reveal the presence of 0.005 micro-curie or  more  of removable contamination.
6.9.3.2 Annually: A tabulation on an annual basis of the number of station, utility and other personnel (including con-tractors) receiving exposures greater than 100 mrem/yr and  their associated  man rem  exposure according to work and job  functions, e.g., reactor operations and sur-veillance, in-service inspection, routine maintenance, special maintenance (describe maintenance), waste pro-cessing, and refueling. The dose assignment to various duty functions may be estimates based on pocket dosi-6.9-8
 
4 I
 
TABLE  6.9-2 REPORTING LEVELS FOR RADIOACTIVITY CONCENTRATIONS  IN ENVIRONMENTAL SANPLES Reporting Levels Broad Leaf Airborne Particu)ate          Fish        Nilk    Vegetables Analysis    Water (pCi/1)    or Gases (pCi/m )      (pCi/Kg, wet)  (pCi/1)  (pCi/Kg, wet)
H-3          3x10 bIn-54      1000                                      3x10 Fe-59        400                                      1  x 10 Co-58        1000                                      3x10 Co-60        300                                      1  x 10 Zr-Nb-95      400 I-131                                0.9                                          1 x 10 Cs-134        30                  '10                1  x 10          60        1 x 10 Cs-137        50                    20                2x10            70        2x10 Ba-La-140    200                                                      300 (a) Total for parent. and daughter


6.9 Re ortin Re uirements In addition to the'applicable reporting requirements of Title 10, Code of Federal Regulations, the following identified reports shall be submitted to the Director of the appropriate Regional Office of Inspection and Enforcement unless otherwise noted.6.9.1 6.9.1.1 Routine Reports Startu Re ort.A summary report of plant startup and power escalation testing shall be submitted following (1)receipt of an operating license, (2)amendment to the license involving a planned increase in power level, (3)installation of fuel that has a different design or has been manufactured by a different fuel supplier, and (4)modifications that may have sig-nificantly altered the nuclear, thermal, or hydraulic performance of the plant.The report shall address each of the tests performed and shall in general include a description of the measured values of the operating conditions or characteristics obtained dur-ing the test program and a comparison of these values with design predictions and specifications.
  ~h ~
Any corrective actions that.were required to obtain satis-factory operation shall also be described.
I
Any addi-\tional specific details required in license conditions 4 based on other commitments shall be included in this report.6.9-1


Startup reports shall be submitted within (1)90 days following completion of the startup test program, or (2)90 days following resumption of commercial power operation, whichever is earliest.If the Startup Report does not cover both events (i.e., completion of startup test program, and resumption of commercial power operation), supplementary reports shall be sub-mitted at least every three months until both events have been completed.
meter, TLD, or film badge  measurements. Small exposures totalling less  than  20% of the individual total dose need not be  accounted for. In the aggregate, at least 80%  of the total whole body dose received from external sources shall be assigned to specific major work functions.
Nonthl 0 eratin Re ort..Routine reports of operating statistics and shutdown experience shall be submitted on a monthly basis to the Director, Office of Nanagement Information and Program Control, U.S.Nuclear Regulatory Commission, Washington, D.C.20555 by the fifteenth of each.month following the calendar month covered by the report.The monthly report shall include a narrative summary of operating experience describing the operation of the facility, including major safety related main-tenance for the monthly period, except that safety related maintenance performed during tne refueling outage may be reported in the monthly report for the month following the end of the outage rather than each month during the outage.Annual Radiolo ical Environmental 0 eratin Re ort Routine radiological environmental reports covering the operation of the unit during the previous calendar year shall be submitted prior to Nay 1 of each year.6.9-2
(NOTE: This tabulation supplements the reguirements of Section 20.407 of 10 CFR Part; 20.)
6.9-10


The annual radiological environmental reports shall include summaries,=interpretations, and analysis of trends of the results of the radiological environ-mental surveillance activities for the report period, including a comparison with preoperational studies, operational controls (as appropriate}, and previous environmental surveillance reports and an assessment.
6.15    bIa'or Chan es to Radioactive Waste Treatment  S          stems (Iiguid  and Gaseous)
of the observed impacts of the plant operation on the environment.
FUNCTION 6.15.1  The radioactive waste treatment systems (liguid              and gaseous)  are those systems defined in Technical Speci-fication 5.5.
The reports shall also include the results of land use censuses as required.The annual radiological environmental reports shall include summarized and tabulated results in the format of Table 6.9-1 of all radiological environmental samples taken during the report.period.In the event that some results are not available for inclusion with the report, the report shall be submitted noting and explaining the reasons for the missing results.The missing data shall be submitted as soon as possible in a supplementary report.The reports shall also include the following:
6.15.2  Major changes to the radioactive waste systems              (liquid and gaseous)  shall be reported by the following method.
a summary description of the radiological environmental monitoring program including a map of all sampling locations keyed to a table giving distances and direc-tions from the reactor, and the results of the participa-tion in an interlaboratory comparison program.6.9-3
For the purpose of this specification, 'major    changes's defined in Specification 6.16.3 below.
6.15.2.1 The Commission shall be informed of all major changes by the inclusion of a suitable discussion or by reference to a suitable discussion of each change in the Semiannual Radioactive Effluent Release Report for the period in which the changes were made. The discussion of each change shall contain:
a)    a summary of the evaluation that led to the deter-mination that the change could be made (in accord-ance with 10 CFR 50.59):
b)    sufficient detailed information to support the reason for the change; c)    a detailed description of the equipment, components and processes involved and, the interfaces with other plant systems; 6.15-1


Note: Routine'surveillance testing, instrument calibration, or preventative maintenance which require system configurations as described in items 2.b(l)and 2.b(2)need not be reported except where test, results.themselves reveal a degraded mode as de-scribed above.(3)Observed inadequacies in the implementation of administrative or procedural controls which threaten to cause reduction of degree of re-dundancy provided in reactor protection systems or engineered safety feature systems.(4)Abnormal degr'adation of systems other than those specified in items 2.a(3)above designed to contain radioactive material resulting from the fission process.Note: Sealed sources or calibration sources are not included under this item.Leakage of'alve packing or gaskets within the limits for identified leakage set, forth in technical specifications need not be reported under this item.(5)Measured levels of radioactivity in an environ-mental sampling medium determined to exceed the reporting level values of Table 6.9-2 when averaged over any calendar quarter sampling period.When more than one of the radionuclides 6.9-7
4 Attachment  B The proposed Technical Specifications for radiological th      b      7 7,     1, ~d~' ~    '~
effluents have been developed based upon NRC guidance provided in Effluent Technical S ecifications for PWRs. The NRC gul.dance has een adapted to a format su>.table or inclusion in the Ginna Technical Specifications and changes have been made,to account for the Ginna facility design. The proposal includes requirements to ensure compliance with 10 CFR Part 20, Appendix I to 10 CFR Part 50 and 40 CFR 190.
Effluent monitors are provided to aid in ensuring that the limits of 10 CFR Part 20 are met. The allowance      for inoperability is generally consistent with the NRC guidance and requires    that sampling of effluents be performed in case a monitor is required but inoperable. Instead of shutting down the plant      if the oxygen monitor is inoperable, samples will be taken at short intervals.
This is preferred since a plant shutdown would result. in a sig-nificant amount of waste gas which would have to be handled during a time at which   it may be desirable to minimize gas handling.
4 Limiting 0onditions for operation to implement, 10 CFR Parts 20 and 50 have been developed following NRC guidance.      For un-planned gaseous releases, a 24 hour averaging is permitted in determining compliance with 10 CFR Part 20. This is acceptable based on the definitions within Part 20 and based upon effluent surveillance instrumentation analysis schedules. Radwaste treat-ment equipment will be operated, as appropriate, to limit potential doses due to plant effluents. Portions or all of the radwaste treatment systems are required to be operated should the projected doses otherwise exceed    preestablished values.
No limits have been proposed for contents of the gas decay tanks. This due to the fact that any credible quantity of waste gas in any single tank will be well below the quantity which would have to be released to yield a site boundary dose of 0.5 Rem, even with accident, meteorology. Specifically, FSAR Section 14.2.3 reports a reactor coolant system inventory of equivalent xenon assuming no release over a full core cycle and one percent failed fuel as 46,000 Curies. Using the equations presented in
. NUREG-0133, one finds that a release of approximately 100,000 Curies is necessary to yield a site boundary dose of 0.5 Rem.
This assumes that accident meteorology is used instead of annual average meteorology, which seems more appropriate and would provide even greater margins.
An environmental monitoring program is reestablished based on NRC guidance. Samples are collected and analyzed at intervals throughout the year with sampling being conducted at a reduced level during the winter. This reduction is acceptable based on the fact that food pathways are either absent or of reduced con-sequences in the winter.


6.9.3 6.9.3.1 in Table 6.9-2 are'etected in the sampling medium, this report shall be submitted if: concentration (1+concentration 2+....)1.0 lxmxt eve 1 xmas.t evel 2 When radionuclides other than those in Table 6.9-2 are detected and are the result of plant effluents, this report shall be submitted if the potential annual dose to an individual is equal to or greater than the calendar year limit of Specifications 3.9.1.2.a or 3.9.2.2.a.
gO
This re-port.is not required if the measured level of radioactivity was not the result of plant efflu-ents;however, in such an event, the condition shall be reported and described in the Annual Radiological Environmental Monitoring Report.Uni ue Re ortin Re uirements Annually: Results of required leak tests performed on sources if the tests reveal the presence of 0.005 micro-curie or more of removable contamination.
  ,(
6.9.3.2 Annually: A tabulation on an annual basis of the number of station, utility and other personnel (including con-tractors)receiving exposures greater than 100 mrem/yr and their associated man rem exposure according to work and job functions, e.g., reactor operations and sur-veillance, in-service inspection, routine maintenance, special maintenance (describe maintenance), waste pro-cessing, and refueling.
The dose assignment to various duty functions may be estimates based on pocket dosi-6.9-8 4 I TABLE 6.9-2 REPORTING LEVELS FOR RADIOACTIVITY CONCENTRATIONS IN ENVIRONMENTAL SANPLES Reporting Levels Analysis H-3 Water (pCi/1)3x10 Airborne Particu)ate or Gases (pCi/m)Broad Leaf Fish Nilk Vegetables (pCi/Kg, wet)(pCi/1)(pCi/Kg, wet)bIn-54 Fe-59 Co-58 Co-60 Zr-Nb-95 I-131 Cs-134 1000 400 1000 300 400 30 Cs-137 50 Ba-La-140 200 0.9'10 20 3x10 1 x 10 3x10 1 x 10 1 x 10 2x10 60 70 300 1 x 10 1 x 10 2x10 (a)Total for parent.and daughter I~h~
meter, TLD, or film badge measurements.
Small exposures totalling less than 20%of the individual total dose need not be accounted for.In the aggregate, at least 80%of the total whole body dose received from external sources shall be assigned to specific major work functions.(NOTE: This tabulation supplements the reguirements of Section 20.407 of 10 CFR Part;20.)6.9-10


6.15 bIa'or Chan es to Radioactive Waste Treatment S stems (Iiguid and Gaseous)FUNCTION 6.15.1 The radioactive waste treatment systems (liguid and gaseous)are those systems defined in Technical Speci-fication 5.5.6.15.2 6.15.2.1 Major changes to the radioactive waste systems (liquid and gaseous)shall be reported by the following method.For the purpose of this specification,'major changes's defined in Specification 6.16.3 below.The Commission shall be informed of all major changes by the inclusion of a suitable discussion or by reference to a suitable discussion of each change in the Semiannual Radioactive Effluent Release Report for the period in which the changes were made.The discussion of each change shall contain: a)a summary of the evaluation that led to the deter-mination that the change could be made (in accord-ance with 10 CFR 50.59): b)sufficient detailed information to support the reason for the change;c)a detailed description of the equipment, components and processes involved and, the interfaces with other plant systems;6.15-1 4
Radiation monitoring instrumentation used for effluent.
Attachment B The proposed Technical Specifications for radiological effluents have been developed based upon NRC guidance provided in th b 7'7, 1,~d~'~'~Effluent Technical S ecifications for PWRs.The NRC gul.dance has een adapted to a format su>.table or inclusion in the Ginna Technical Specifications and changes have been made,to account for the Ginna facility design.The proposal includes requirements to ensure compliance with 10 CFR Part 20, Appendix I to 10 CFR Part 50 and 40 CFR 190.Effluent monitors are provided to aid in ensuring that the limits of 10 CFR Part 20 are met.The allowance for inoperability is generally consistent with the NRC guidance and requires that sampling of effluents be performed in case a monitor is required but inoperable.
surveillance has been removed from Table 4.1-1 and placed in Table 4.1-3. In Table 4.1-1, the emergency plan instruments will be calibrated annually instead of at refueling intervals.       This will allow calibration to be performed at times other     than the refueling outage..
Instead of shutting down the plant if the oxygen monitor is inoperable, samples will be taken at short intervals.
In Table 4.1-3, channel calibration is to be performed annually instead of at, refueling intervals. This is to avoid the necessity to calibrate during refueling outages. If the NRC intends the interval "R" to imply every 18 months independent. of the refueling outage, we request that. that be the calibration interval listed as refueling.
This is preferred since a plant shutdown would result.in a sig-nificant amount of waste gas which would have to be handled during a time at which it may be desirable to minimize gas handling.4 Limiting 0onditions for operation to implement, 10 CFR Parts 20 and 50 have been developed following NRC guidance.For un-planned gaseous releases, a 24 hour averaging is permitted in determining compliance with 10 CFR Part 20.This is acceptable based on the definitions within Part 20 and based upon effluent surveillance instrumentation analysis schedules.
Environmental surveillance requirements are consistent with NRC guidance.
Radwaste treat-ment equipment will be operated, as appropriate, to limit potential doses due to plant effluents.
Effluent surveillance is presented in Section 4.12.       Batch releases   are sampled as shown   in Table 4.12-1. Since compliance with 10 CFR   Part 20 may be shown through a gross beta analysis, this is permitted.
Portions or all of the radwaste treatment systems are required to be operated should the projected doses otherwise exceed preestablished values.No limits have been proposed for contents of the gas decay tanks.This due to the fact that any credible quantity of waste gas in any single tank will be well below the quantity which would have to be released to yield a site boundary dose of 0.5 Rem, even with accident, meteorology.
Specifically, FSAR Section 14.2.3 reports a reactor coolant system inventory of equivalent xenon assuming no release over a full core cycle and one percent failed fuel as 46,000 Curies.Using the equations presented in.NUREG-0133, one finds that a release of approximately 100,000 Curies is necessary to yield a site boundary dose of 0.5 Rem.This assumes that accident meteorology is used instead of annual average meteorology, which seems more appropriate and would provide even greater margins.An environmental monitoring program is reestablished based on NRC guidance.Samples are collected and analyzed at intervals throughout the year with sampling being conducted at a reduced level during the winter.This reduction is acceptable based on the fact that food pathways are either absent or of reduced con-sequences in the winter.
gO ,(
Radiation monitoring instrumentation used for effluent.surveillance has been removed from Table 4.1-1 and placed in Table 4.1-3.In Table 4.1-1, the emergency plan instruments will be calibrated annually instead of at refueling intervals.
This will allow calibration to be performed at times other than the refueling outage..In Table 4.1-3, channel calibration is to be annually instead of at, refueling intervals.
This necessity to calibrate during refueling outages.intends the interval"R" to imply every 18 months the refueling outage, we request that.that be the interval listed as refueling.
performed is to avoid the If the NRC independent.
of calibration Environmental surveillance requirements are consistent with NRC guidance.Effluent surveillance is presented in Section 4.12.Batch releases are sampled as shown in Table 4.12-1.Since compliance with 10 CFR Part 20 may be shown through a gross beta analysis, this is permitted.
A composite sample analyzed for principal gamma emitters and I-131 will provide the information required for dose calculations.
A composite sample analyzed for principal gamma emitters and I-131 will provide the information required for dose calculations.
For the purposes of this Specification, release of the neutraliz-ing tank to the retention tank is considered a batch release.No additional sampling is required of the retention tank since its major input is the neutralizing tank.(Small sources, in terms of radioactivity, include floor drains in non contaminated areas.)The retention tank discharge is activated on high level in the tank and is through a radiation monitor.Waste treatment systems considered in the evaluation which was performed pursuant.to Appendix I are listed in Section 5.5.Under audits, the change in the insurance brokerage firm from NELPIA to ANI is reflected.
For the purposes of this Specification, release of the neutraliz-ing tank to the retention tank is considered a batch release. No additional sampling is required of the retention tank since its major input is the neutralizing tank. (Small sources, in terms of radioactivity, include floor drains in non contaminated areas.)
This is purely an administra-tive change.The Offsite Dose Calculation Nanual is presently in draft form.Revisions to the draft, are being considered based upon revised guidance provided by the NRC letter dated January 18, 1979, which was received February 2, 1979.Specifications for solid radwaste have not been proposed since they are unrelated to Appendix I or to Part.20.In addi-tion, they appear to be based on Standards which are still in draft form.Also, although solid wastes generated by Ginna Station comply with'current regulations, they do not, meet the Specifications suggested by the NRC.Finally, an industry task force is being established under the auspices of AIF to develop requirements appropriate for currently operating plants and equipment and consistent, with the regulations.
The retention tank discharge is activated on high level in the tank and is through a radiation monitor.
Pending the outcome of the study, it does not seem appropriate to propose Specifications.
Waste treatment systems considered in the evaluation which was performed pursuant. to Appendix I are listed in Section 5.5.
$1 Introduction'n a May 28, 1974 letter from Mr.Robert A.Pury c-, the United States Atomic Energy Commission asked several questions on the R.E.Ginna Quality Assurance Program for Station Operation.
Under audits,   the change in the insurance brokerage firm from NELPIA to ANI   is reflected. This is purely an administra-tive change.
The information requested/and further clarification of the program are provided in Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License y Supplement IV is a revised description
The Offsite Dose Calculation Nanual is presently in draft form. Revisions to the draft, are being considered based upon revised guidance provided by the NRC letter dated January 18, 1979, which was received February 2, 1979.
.,of the R.E.Ginna Quality Assurance Program for Station Operation and supersedes Supplement II in its entirety.The follows.ng revisions have been made to the description of the program: Section IV.2 Additions That all{}uality Assurance, Quality.Control, Eng'n-eering, and Purchasing procedures are reviewed for adequacy at least once every/two years.That the list of structures, systems, and components covered by the quality ad'surance program are based on the list in Section 1..1 of the FSAR.That management review of the quality assurance program may be in a form otHer than'an audit.That the Nuclear>Safety Audit and Review Board is required to review the status and adequacy of the quality assuram(ce program at least once every two years.s That the CQ irman of the Nuclear Safety Audit and, Review Board reports to the Chairman of the Board of Rochester Gas and Electric Corporation on NSARB activities.
Specifications for solid radwaste have not been proposed since they are unrelated to Appendix I or to Part. 20. In addi-tion, they appear to be based on Standards which are still in draft form. Also, although solid wastes generated by Ginna Station comply with 'current regulations, they do not, meet the Specifications suggested by the NRC. Finally, an industry task force is being established under the auspices of AIF to develop requirements appropriate for currently operating plants and equipment and consistent, with the regulations. Pending the outcome of the study, Specifications.
Section V.3 Addj~tions That spare or replacement parts meet, at least, the requirements of the original design.IV-i Revision 1 August 1974 1 0, 1 That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.
it does not seem appropriate to propose
That design deficiencies are documented and controlled in accordance with Section IV.16.That design documents are collected,'tored, and main-tained in accordance with Section II.17 and a listing of which design documents are maintained.
 
Clarification Clarified which design documents are reviewed by Quality Assurance.
1
Section IV.4 Additions That procurement documents for spare or replacement parts are processed in the same manner as other procurement documents.
 
That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.That the documents are available for verification in Purchasing and plant records.That Quality Control reviews procurement documents for spare and replacement parts for similarity to the original requirements, and adequacy of quality require-ments.Section IV.5 Clarification Clarifies which documents are reviewed by Quality Assurance.
Introduction'n a May 28, 1974 letter from Mr. Robert A. Pury c-,
Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.IV-ii Revision 1 August 1974 t P 4 That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.
the United States Atomic Energy Commission asked several questions on the R. E. Ginna Quality Assurance Program for Station Operation. The information requested/and further clarification of the program are provided in Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License             y Supplement IV is a revised description .,of the R. E. Ginna Quality Assurance Program for Station Operation and supersedes Supplement II in its entirety. The follows.ng revisions have been made   to the description of the program:
Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.Added Quality Control responsibilities for sur-veillance and inspection of special process activi-'ies.
Section IV.2 Additions That all {}uality Assurance,         Quality .Control, Eng'n-for eering, and Purchasing procedures are reviewed adequacy at least once every/two years.
Section IV.10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of, the activity.That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification of the organization responsible for performing the inspection, the acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.That inspection equipment is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.Section IV.ll Addition That test procedures include test methods and test instrumentation definition.
That the list of structures, systems, and components covered by the quality ad'surance program are based on the list in Section 1. .1 of the FSAR.
IV-iii Revision 1 August 1974 j llf f II Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.
That management review of the quality assurance program may be in a form otHer than 'an audit.
Section IV.14 Addition That written procedures control the use of hold tags, test tags and labels and that the procedures require the recording of the name.of the person placing and removing the tag.Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.Section IV.17 Additions That plant records include operating logs, specifications, calibration procedures and nonconformance reports, and the results of tions, tests, audits and the monitoring of activities and material analyses.drawings, reports, inspec-plant That quality assurance records of special process activities are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.
That the Nuclear>Safety Audit and Review Board is required to review the status and adequacy of the quality assuram(ce program at least once every two years.
s That the   CQ irman of the Nuclear Safety Audit and, Review Board reports to the Chairman of the Board of Rochester Gas and Electric Corporation on NSARB activities.
Section   V.3 Addj~tions That spare or replacement parts meet, at least, the requirements of the original design.
IV-i               Revision 1 August 1974
 
1 0, 1
 
That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.
That design deficiencies are documented and controlled in accordance with Section IV.16.
That design documents are collected,'tored,       and main-tained in accordance with Section II.17 and     a listing of which design documents are maintained.
Clarification Clarified which design   documents are reviewed by Quality Assurance.
Section IV.4 Additions That procurement documents   for spare or replacement parts are processed in the   same manner as other procurement documents.
That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.
That the documents are available     for verification in Purchasing and plant records.
That Quality Control reviews procurement documents       for spare and replacement parts for similarity to the original requirements,   and adequacy of quality require-ments.
Section IV.5 Clarification Clarifies which   documents are reviewed by   Quality Assurance.
Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.
IV-ii                 Revision   1 August 1974
 
t P 4
 
That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.
Section IV.9 Additions Made   procurement document review requirements consistent with Section IV.4.
Added Quality Control responsibilities for sur-veillance and inspection of special process     activi-'ies.
Section IV.10 Additions That   all documentation necessary to perform an inspection is available to the inspector prior to the performance of, the activity.
That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification of the organization responsible for performing the inspection, the acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.
That inspection equipment is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.
Section   IV.ll Addition That   test procedures include test methods and             test instrumentation definition.
IV-iii             Revision             1 August 1974
 
j llf f
II
 
Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.
Section IV.14 Addition That written procedures control the use of hold tags, test tags and labels and that the procedures require the recording of the name. of the person placing and removing the tag.
Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.
Section IV.17 Additions That plant records include operating logs,  drawings, specifications, calibration procedures and   reports, nonconformance reports, and the results of   inspec-tions, tests, audits and the monitoring of   plant activities and material analyses.
That quality assurance records of special process activities   are maintained by Engineering and that they include the qualification records of personnel, procedures,   and equipment.
That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
IV-iv Revision 1 August 1974 t f (1'O t, ll 1 0 Section IV.18 Addition That Quality Assurance is responsible for conducting the audits listed in Table IV.18-1.In July 1974, the United States Atomic Energy Commission requested information on the conformance of the R.E.Ginna Quality Assurance Program for.Station Operation to the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0).The infor-, mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License.The following changes have been made to Supplement IV: Section IV.1 Additions A description of the extent to which the quality assurance program conforms to the document entitled"Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0).On October 1, 1974, Rochester Gas and Electric Cor-poration revised its corporate structure.
IV-iv             Revision 1 August 1974
This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program.In addition, the RG&E commitment to the"Orange Book" in August has necessitated some shifting of responsibilities.
 
The changes RG&E has made are reflected in Revision 2 to Supplement IV to the Technical Supplement accompanying Application for a Full Term Operating License.The changes affect every section of the supplement except sections 12&14.Change pages are listed in Instructions 2 and each revised page is marked with revision level.In addition, the latest revision is marked with a vertical line in the left hand margin of each page.The revision level is noted by an arabic numeral next to each vertical line.IV-v Revision 2 November 1, 1974 0 11 y II F'I C I 0 Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii.Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement II and Supplement IV.Some editorial corrections have been made, and these are also marked..3 Effective February 1, 1976, three additional organizations in the Rochester Gas and Electric Corporation have been assigned responsi-bilities for control of quality related activities.
t f
The changes are reflected in Revision 3 to Supplement IV to the Technical Supplement Accompanying Application for a Full Term Operating License.Revision 3 also reflects some reclarification of terms and responsibilities which do not lesson our program commitments.
(
Reclarification changes are concentrated in sections IV-3, IV-4, IV-5, IV-6 and IV-15.Change pages are listed in Instructions-3, and each revised page is marked with revision level.In addition, the latest revision is marked with a vertical line in the left hand margin of each page.The revision level-is noted by an arabic numeral next to each vertical line.Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii.Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement XI and Supplement IV.During July, 1978, Rochester Gas and Electric Corporation revised its corporate structure.
1
This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program.Revision 4 also reflects some reclarification of terms and respon-sibilities which do not lessen Rochester Gas and Electric Cor-poration program commitments.
  'O t,
Reclarification changes are concentrated in sections XV-1, IV-2, IV-3, XV-7, XV-10 and IV-15.Change pages are listed in Instructions-4 and each revised page is marked with revision level.Since single spacing of each page has reduced the number of pages, each page beginning with IV-1 is numbered consecutively resulting in the Revision 4 notation at the bottom for that page" containing different information than the corresponding page number of previous revisions.
1     ll 0
Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii.4/IV-vA Revision 4 December 1978


~~In a February 8, 1979 letter from Mr.Dennis L.Ziemann, the Nuclear Regulatory Commission requested additional information associated with their review of Revision 4.Revision 5 provides the additional information and better clarification of the program consistent with that which was forwarded in Rochester Gas and Electric letter dated March 9, 1979.Change pages are listed in Instructions
Section IV.18 Addition That Quality Assurance is responsible  for conducting the audits listed in Table IV.18-1.
-5, and each revised page is marked with a revision level.In addition, the latest revision is marked with a vertical line in the left hand margin of each page.The revision level is noted by an arabic numeral next to each vertical line.Tables which have been re-vised are shown by revision level at the bottom of the page.6 In a June 5, 1979 letter from Mr.Dennis L.Ziemann, the Nuclear Regulatory Commission requested additional information associated with their review of Revision 5.Revision 6 provides the additional information consistent with that which was forwarded in Rochester Gas and Electric letter dated June 25, 1979.Change pages are listed in Instruction
In July 1974, the United States Atomic Energy Commission requested   information on the conformance of the R. E. Ginna Quality Assurance Program for. Station Operation to the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book  Revision 0). The infor-,
-6, and each revised page is marked with a revision level.In addition, the latest revision is marked with a vertical line in the left hand margin of each page.The re-vision level is noted by arabic numeral next to each vertical line.o vl Revision 7 was prepared to indicate recent organization changes in the corporate structure, Quality Assurance and General Maintenance.
mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. The following changes have been made to Supplement IV:
Change pages are listed in Instructions
Section IV.1 Additions A  description of the extent to which the quality assurance program conforms to the document entitled "Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants",
-7, and each revised page is marked with a revision level.In addition, the latest revision is marked with a vertical line in the left hand margin of each page.The revision level is noted by an arabic numeral next to each vertical line.Revision 7 November 1980 IV-vB
Revision 0 dated October 1973 (Orange Book  Revision 0).
On  October 1, 1974, Rochester Gas and Electric Cor-poration revised its corporate structure. This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program. In addition, the RG&E commitment to the "Orange Book" in August has necessitated some shifting of responsibilities. The changes RG&E has made are reflected in Revision 2 to Supplement IV to the Technical Supplement accompanying Application for a Full Term Operating License.
The changes affect every section of the supplement except sections 12 & 14. Change pages are listed in Instructions 2 and each revised page is marked with revision level.     In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next to each vertical line.
IV-v                Revision 2 November 1, 1974


TABLE OF CONTENTS Section Title Pa<ac IV.1 IV.2 IV.3 IV.4 IV.5 IV.6 IV.7 QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Quality Assurance Program Organization Design Control Procurement Document Control Instructions, Procedures and Drawings Document Control Control of Purchased Material, Equipment and Services IV-1 IV-4 IV-8 IV-10 XV-lla IV-13 IV-15 IV.8 XV.9 IV.10 IV.11 IV.12 IV.13 XV.14 IV.15 XV.16 IV.17 IV.18 Identification and Control of Materials, Parts and Components Control of Special Processes Inspection Test Control Control of Measuring an/Test Equipment Handling, Storage and Shipping Inspection, Test and Operating Status Nonconforming Materials,,Parts and Components Corrective Action Qua'lity Assurance Records Audits IV-17 IV-18 IV-19 IV-20 XV-21 IV-22 IV-23 IV-24 XV-25 f IV-26 IV-28 IV-vi Revision'5 April 1979 I C h l LIST OF TABLES Table Number IV.1-1 IV.4-1 IV.18-1 Title Quality Assurance Program Procedures Subject Listing Procurement Document Requirements Audit List Pa<ac IV-30*IV-40*IV-41*LIST OF FIGURES Fi ure Number IV.2-1 IV.2-2 IV.2-3 IV.2-4 IV.2-5 3 IV.2-6 Title Management Organization Deleted Ginna Station Organization General Maintenance Organization Engineering Department Organization Review and Audit Functions Pacae IV-43*IV-44*IV-45*IV-46*IV-47*IV-48**All tables and figures except Figure IV.2-5 have been revised in Revision 3.IV-vii Revision 7 November 1980
0 11 y II F
  'I C
I 0


QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Cor-poration to assure safe and reliable operation of the R.E.Ginna Nuclear Power Plant.This program applies to all activities affecting the safety related functions of.the structures, systems, and components that prevent or mitigate the consequences of postulated accidents that could cause undue risk to the health and safety of the public.,These quality affecting activities include operation, maintenance, repair, inservice inspection, refueling, modification, test and inspection.
Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii. Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement  II and Supplement IV. Some editorial corrections have been made, and these are also marked.
In addition, the quality assurance program applies to the activities associated with the packaging of licensed radioactive materials to be shipped in accordance with 10 CFR Part, 71.The basic Rochester Gas and Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate Statement of Quality Assurance Policy.This policy is implemented by the Vice President, Electric and Steam Production, through the Manager, Quality Assurance, and the Ginna Station Superintendent.
Effective February 1, 1976, three additional organizations in the Rochester Gas and Electric Corporation have been assigned responsi-bilities for control of quality related activities. The changes are reflected in Revision 3 to Supplement IV to the Technical Supplement Accompanying Application for a Full Term Operating License. Revision 3 also reflects some reclarification of terms and responsibilities which do not lesson our program commitments.
The'rogram is governed by a Ginna Station Quality Assurance Manual whi'ch contains the requirements and assignment of responsibilities for implementation of the program.The manual is prepared, reviewed, and maintained by Quality Assurance and approved by the Vice President, Electric and Steam Production.
Reclarification changes are concentrated in sections IV-3, IV-4, IV-5, IV-6 and IV-15. Change pages are listed in Instructions-3,
The program is implemented through Quality Assurance, Ginna Station, Engineering, General Maintenance, Electric Meter and Laboratory and Purchasing Procedures.
.and each revised page is marked with revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level -is noted by an arabic numeral next to each vertical line.
These procedures are prepared and approved by the responsible organization and reviewed and concurred with by Quality Assurance.
Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii. Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement XI and Supplement IV.
The p'rocedures are contained in separate manuals maintained by the responsible organization.
During July, 1978, Rochester Gas and Electric Corporation revised its corporate structure. This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program.
All these procedures are reviewed for adequacy at least once every two years by the responsible organization.
Revision 4 also reflects some reclarification of terms and respon-sibilities which do not lessen Rochester Gas and Electric Cor-poration program commitments. Reclarification changes are concentrated in sections XV-1, IV-2, IV-3, XV-7, XV-10 and IV-15.
Table IV.l-l provides a listing of the subjects and a short description of the subject matter which is contained in the procedures.
Change pages are listed in Instructions-4 and each revised page is marked with revision level. Since single spacing of each page has reduced the number of pages, each page beginning with IV-1 is numbered consecutively resulting in the Revision 4 notation at the bottom for that page" containing different information than the corresponding page number of previous revisions.
Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual.Organizational responsibilities are described in Section IV.2.The quality assurance program covers all existing Seismic Category I structures, systems, and components, including their foundations and supports.Activities.
Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii.
affecting the quality of these structures, systems, and components are IV-1 Revision 4 December 1978 II controlled to an extent consistent'ith their importance to safety.A detailed lists.ng of the structures, systems, and components covered by the quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assur-ance Manual.Details of the system boundaries and the quality classi-fication of water-and-steam-containing components are con-tained on system flow drawings.The listing of structures, systems, and components-covered by the quality assurance program and the system flow drawings are prepared and main-tained by Engineering and reviewed and concurred with by Quality Assurance.
4/                                IV-vA          Revision 4 December 1978
r Modifications or additions to existing, structures, systems, and components are designated the same seismic classifica-tion as the existing system.New structures, systems, and components are designated a seismic classification in accordance with the'guidelines in USNRC Regulatory Guide 1.29.Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced.Personnel responsible for performing activities affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures.
Refresher sessions are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure.
Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.Quality Assurance assists in establishing training requirements and assures that personnel are trained by auditing training records.1n addition to training in quality assurance, each depart-ment conducts on-the-job training to the extent necessary'to assure that personnel are qualified for their primary work assignments.
The Ginna Station Superintendent is responsible for the formal training, qualification, licensing, and requali-fication of operators, as necessary.
Wlhere necessary, personnel are trained in radiation protection, plant safety and security.The Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that it is meaningful and is effectively complying with corporate policy and 10CFR50, Appendix B.This review consists of audits or a review equivalent to an audit performed, by IV-2 Revision 4 December 1978  


~~~company personnel or outside organizations.
      ~ ~
Reviews will be conducted every six months during the first two years that the program is implemented.
In a February 8, 1979 letter from Mr. Dennis L. Ziemann, the Nuclear Regulatory Commission requested additional information associated with their review of Revision 4. Revision 5 provides the additional information and better clarification of the program consistent with that which was forwarded in Rochester Gas and Electric letter    dated March 9, 1979. Change pages are listed in Instructions  5, and each revised page is marked with a revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next to each vertical line. Tables which have been re-vised are shown by revision level at the bottom of the page.
The quality assurance program is designed to meet the require-ments of Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants." The program conforms to the following NRC Regula-tory Guides and ANSI Standards:
In a June 5, 1979 letter from Mr. Dennis L. Ziemann, the Nuclear Regulatory Commission requested additional information associated with their review of Revision 5. Revision 6 provides the additional information consistent with that which was forwarded in Rochester 6 Gas and Electric letter dated June 25, 1979. Change pages are listed in Instruction  6, and each revised page is marked with a revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The re-vision level is noted by arabic numeral next to each vertical line.
a.NRC Regulatory Guide 1.8, Revision 1,"Personnel Selec-tion and Training." b.NRC Regulatory Guide 1.28, Revision 2,"Quality Assur-ance Program Requirements (Design and Construction)." c.AEC Regulatory Guide 1.30, Revision 0,"Quality Assurance Requirements for the Installation, Inspection, and Testing of Instrumentation and Electric Equipment." d.AEC Regulatory Guide 1.33, Revision 0,"Quality Assurance Program Requirements (Operation)," and regulatory staff comments and supplementary guidance contained in the docu-ment entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants," Revision 0 dated October 1973 (Orange Book-Revision 0)e.AEC Regulatory Guide 1.37, Revision 0,"Quality Assurance Requirements for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants." f.AEC Regulatory Guide 1.38, Revision 2,"Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants." g.AEC Regulatory Guide 1.39, Revision 2,"Housekeeping Requirements for Water-Cooled Nuclear Power Plants." h.AEC Regulatory Guide 1.58, Revision 0,"Qualification of Nuclear Power Plant Inspection, Examination and Testing Personnel." i.AEC Regulatory Guide 1.64, Revision 1,"Quality Assurance Requirements for the Design of Nuclear Power Plants." Revision 6 July 1979 p
Revision 7 was prepared to indicate recent organization changes in the corporate structure, Quality Assurance and General Maintenance.
j.AEC Regulatory Guide 1.74, Revision 0,"Quality Assurance Terms and Definitions." k.AEC Regulatory Guide 1.88, Revision 2,"Collections, Stor-age and Maintenance of Nuclear Power Plant Records." Note: Nhen record storage facilities are not designed in accordance with the requirements of Regulatory Guide 1.88, duplicate records are kept in two separate stroage locations in separate buildings which are physically isolated from each other.1 1.NRC Regulatory Guide 1.116, Revision O-R,"Quality Assur-ance Requirements for Installation, Inspection, and Testing of Mechanical Equipment and Systems." 41 m.NRC Regulatory Guide 1.123, Revision 1,"Quality Assurance Requirements for Control of Procurement of Items and Ser-vices for Nuclear Power Plants." n.ANSI N45.2.12, D3, R4, 2/74"Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants." The major organizations participating in the quality assur-ance program are the Purchasing, Engineering, Ginna Station, General Maintenance, Electric Meter and Laboratory Department; Quality Assurance and Quality Control Groups;the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board.Fj.gure IV.2-1 is an organizational chart showing these organizations and their relationship to the corporate organization.
Change pages are listed in Instructions  7, and each revised page o vl is marked with a revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next to each  vertical line.
Positions responsible for the principal elements of the quality assurance program are: 7'I Chairman of the Board Vice President, Electric and Steam Production Vice President and Chief Engineer Manager, Quality Assurance Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer Superintendent, Electric Meter and Laboratory Superintendent, General Maintenance General Maintenance Quality Control Coordinator Director, Strategic and Fuel Planning Supervisor, Materials Engineering Revision 7 November 1980  
Revision 7 November 1980 IV-vB


2'I In addition to the above individuals, two advisory groups are utilized to review and aud'it plant operations.
TABLE OF CONTENTS Section            Title                                Pa<ac QUALITY ASSURANCE PROGRAM FOR STATION OPERATION IV. 1  Quality Assurance Program                        IV-1 IV. 2  Organization                                    IV-4 IV. 3  Design Control                                  IV-8 IV.4    Procurement Document Control                    IV-10 IV.5    Instructions, Procedures  and Drawings          XV-lla IV.6    Document  Control                                IV-13 IV.7    Control of Purchased Material, Equipment        IV-15 and Services IV.8    Identification and Control of Materials,        IV-17 Parts and Components XV. 9  Control of Special Processes                    IV-18 IV. 10  Inspection                                      IV-19 IV. 11  Test Control                                    IV-20 IV. 12  Control of Measuring an/ Test Equipment          XV-21 IV.13  Handling, Storage and Shipping                  IV-22 XV. 14  Inspection, Test and Operating Status            IV-23 IV. 15  Nonconforming Materials,,Parts and              IV-24 Components XV. 16  Corrective Action                                XV-25 f
These groups are the Plant Operations Review Committee and the Nuclear Safety Audit and Review Board.The Plant Operations Review Committee acts in hn advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and Review Board advises the.Vice President, Electric and Steam Production.
IV. 17  Qua'lity Assurance Records                      IV-26 IV. 18  Audits                                          IV-28 IV-vi          Revision'5 April 1979
The qualifications of members and the respon-sibilities of these organizations are described in Appendix A to Provisional Operating Licensed No.DPR-18, Section 6.0;Technical Specifications.
 
The Chairman of the Board of the Rochester Gas and Electric Corporation directed the establishment of the quality assur-ance program and issued the governing policy statement.
I C
He has established the Nuclear Safety Audit and Review Board to review and audit plant operations.
h l
The Chairman of the Nuclear Safety Audit and Review Board is responsible to the Executive Vice President on all activities of the Nuclear Safety Audit and Review Board.The Vice President, Electric and Steam Production has cor-porate responsibility for operation of Ginna Station in accordance with applicable regulatory requirements.
 
He is responsible for establishing the policies and requirements necessary to assure safe and reliable operations of Ginna Station.He is also responsible for those items delineated in Section 6.0, Technical Specifications.
LIST  OF TABLES Table Number              Title                                  Pa<ac IV. 1-1            Quality Assurance Program                    IV-30*
He has overall responsibility for and authority to direct quality affecting activities.
Procedures  Subject Listing IV. 4-1            Procurement Document Requirements            IV-40*
He has assigned the responsibility for the detailed development and overall coordination of the quality assurance program to the Manager, Quality Assurance.
IV. 18-1            Audit List                                  IV-41*
LIST  OF FIGURES Fi ure  Number          Title                                  Pacae IV. 2-1            Management  Organization                    IV-43*
IV. 2-2            Deleted                                      IV-44*
IV. 2-3            Ginna  Station Organization                  IV-45*
IV.2-4              General Maintenance Organization            IV-46*
IV. 2-5            Engineering Department Organization          IV-47*
3 IV. 2-6            Review and Audit Functions                  IV-48 *
  *All tables  and figures except Figure    IV.2-5 have been revised in Revision 3.
Revision 7 November 1980 IV-vii
 
QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro    ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Cor-poration to assure safe and reliable operation of the R. E. Ginna Nuclear Power Plant.        This program applies to all activities affecting    the safety related functions of. the structures, systems, and components that prevent or mitigate the consequences of postulated accidents that could cause undue risk to the health and safety of the public. ,These quality affecting activities include operation, maintenance, repair, inservice inspection, refueling, modification, test and inspection. In addition, the quality assurance program applies to the activities associated with the packaging of licensed radioactive materials to be shipped in accordance with  10 CFR  Part, 71.
The  basic Rochester Gas and Electric Corporation quality assurance  policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate Statement of Quality Assurance Policy. This policy is implemented by the Vice President, Electric and Steam Production, through the Manager, Quality Assurance, and the Ginna Station Superintendent.
The'rogram is governed by a Ginna Station Quality Assurance Manual whi'ch contains the requirements and assignment of responsibilities for implementation of the program. The manual is prepared, reviewed, and maintained by Quality Assurance and approved by the Vice President, Electric and Steam Production.
The program is implemented through Quality Assurance, Ginna Station, Engineering, General Maintenance, Electric Meter and Laboratory and Purchasing Procedures.        These procedures are prepared and approved by the responsible organization and reviewed and concurred with by Quality Assurance.          The p'rocedures are contained in separate manuals maintained by the responsible organization. All these procedures are reviewed for adequacy at least once every two years by the responsible organization. Table IV.l-l provides a listing of the subjects and a short description of the subject matter which is contained in the procedures.
Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual. Organizational responsibilities are described in Section IV.2.
The  quality assurance  program covers all existing Seismic Category  I structures,  systems, and components, including their foundations    and supports. Activities. affecting the quality  of these structures,    systems,  and components  are IV-1                Revision  4 December  1978
 
II controlled to an extent consistent'ith their importance to safety. A detailed lists.ng of the structures, systems, and components covered by the quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assur-ance Manual.
Details of the system boundaries and the quality classi-fication of water-and-steam-containing components are con-tained on system flow drawings. The listing of structures, systems, and components -covered by the quality assurance program and the system flow drawings are prepared and main-tained by Engineering and reviewed and concurred with by Quality Assurance.                  r Modifications or additions to existing, structures, systems, and components are designated the same seismic classifica-tion as the existing system. New structures, systems, and components are designated a seismic classification in accordance with the 'guidelines in USNRC Regulatory Guide 1.29.
Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced. Personnel responsible for performing activities affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures. Refresher sessions are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure. Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality. Quality Assurance assists in establishing training requirements and assures that personnel are trained by auditing training records.
1n addition to training in quality assurance,  each depart-ment conducts on-the-job training to the extent necessary'to assure that personnel are qualified for their primary work assignments.
The Ginna  Station Superintendent is responsible for the formal training, qualification, licensing, and requali-fication of operators, as necessary. Wlhere necessary, personnel are trained in radiation protection, plant safety and  security.
The  Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that meaningful and is effectively complying with corporate it is policy and 10CFR50, Appendix B. This review consists of audits or a review equivalent to an audit performed, by IV-2             Revision  4 December  1978
 
~~ ~
company personnel    or outside organizations. Reviews will be conducted every six months during the first two years that the program is implemented.
The quality assurance program is designed to meet the require-ments of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants." The program conforms to the following NRC Regula-tory  Guides and ANSI Standards:
: a. NRC  Regulatory Guide 1.8, Revision 1, "Personnel Selec-tion  and Training."
: b. NRC  Regulatory Guide 1.28, Revision 2, "Quality Assur-ance Program Requirements (Design and Construction)."
: c. AEC  Regulatory Guide 1.30, Revision 0, "Quality Assurance Requirements  for the Installation, Inspection, and Testing of Instrumentation and Electric Equipment."
: d. AEC  Regulatory Guide 1.33, Revision 0,    "Quality Assurance Program Requirements (Operation)," and    regulatory staff comments  and supplementary guidance contained in the docu-ment  entitled  "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants,"
Revision 0 dated October 1973 (Orange Book  Revision 0)
: e. AEC  Regulatory Guide 1.37, Revision 0, "Quality Assurance Requirements  for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants."
: f. AEC  Regulatory Guide 1.38, Revision 2, "Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants."
: g. AEC  Regulatory Guide 1.39, Revision 2, "Housekeeping Requirements  for Water-Cooled Nuclear Power Plants."
: h. AEC  Regulatory Guide 1.58, Revision 0, "Qualification of Nuclear Power Plant Inspection, Examination and Testing Personnel."
: i. AEC  Regulatory Guide 1.64, Revision 1, "Quality Assurance Requirements  for the Design of Nuclear Power Plants."
Revision  6 July  1979
 
p
: j. AEC  Regulatory Guide 1. 74, Revision 0, "Quality Assurance Terms and  Definitions."
: k. AEC  Regulatory Guide 1.88, Revision 2, "Collections, Stor-age and Maintenance of Nuclear Power Plant Records."
Note: Nhen record storage facilities are not designed in accordance with the requirements of Regulatory Guide 1.88, duplicate records are kept in two separate stroage locations in separate buildings which are physically isolated from each other.
1
: 1. NRC Regulatory Guide 1.116, Revision O-R, "Quality Assur-ance Requirements for Installation, Inspection, and Testing of Mechanical Equipment and Systems."
: m. NRC  Regulatory Guide 1.123, Revision 1, "Quality Assurance 41 Requirements  for Control of Procurement of Items and Ser-vices for Nuclear Power Plants."
: n. ANSI N45.2.12,  D3, R4, 2/74 "Requirements for Auditing  of Quality  Assurance Programs for Nuclear Power Plants."
The major  organizations participating in the quality assur-ance program are the Purchasing, Engineering, Ginna Station, General Maintenance, Electric Meter and Laboratory Department; Quality Assurance and Quality Control Groups; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board. Fj.gure IV.2-1 is an organizational chart showing these organizations and their relationship to the corporate organization.
Positions responsible for the principal elements of the quality assurance program are:
Chairman of the Board Vice President, Electric and Steam Production Vice President and Chief Engineer Manager,  Quality Assurance Purchasing Agent Ginna Station Superintendent Ginna  Station Quality Control Engineer Superintendent,  Electric Meter  and Laboratory Superintendent,  General Maintenance General Maintenance Quality Control Coordinator Director, Strategic and Fuel Planning 7'I       Supervisor, Materials Engineering Revision  7 November 1980
 
In addition to the above individuals, two advisory groups are utilized to review and aud'it plant operations. These groups are the Plant Operations Review Committee and the Nuclear Safety Audit and Review Board. The Plant Operations Review Committee acts in hn advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and 2'I  Review Board advises the .Vice President, Electric and Steam Production. The qualifications of members and the respon-sibilities of these organizations are described in Appendix       A to Provisional Operating Licensed No. DPR-18, Section 6.0; Technical Specifications.
The Chairman of the Board of the Rochester Gas and Electric Corporation directed the establishment of the quality assur-ance program and issued the governing policy statement.       He has established the Nuclear Safety Audit and Review     Board to review and audit plant operations. The Chairman of the Nuclear Safety Audit and Review Board is responsible to the Executive Vice President on all activities of the Nuclear Safety Audit and Review Board.
The Vice President, Electric and Steam Production has cor-porate responsibility for operation of Ginna Station in accordance with applicable regulatory requirements.     He is responsible for establishing the policies and requirements necessary to assure safe and reliable operations of Ginna Station. He is also responsible for those items delineated in Section 6.0, Technical Specifications. He has overall responsibility for and authority to direct quality affecting activities. He has assigned the responsibility for the detailed development and overall coordination of the quality assurance program to the Manager, Quality Assurance.
The responsibility for proper implementation of the quality assurance program requirements at Ginna Station has been assigned to the Ginna Stat'ion Superintendent.
The responsibility for proper implementation of the quality assurance program requirements at Ginna Station has been assigned to the Ginna Stat'ion Superintendent.
The Vice President and Chief Engineer has corporate responsi-bility for the design and construction of nuclear power plants and related major modifications.
The Vice President and Chief Engineer has corporate responsi-bility for the design and construction of nuclear power plants and related major modifications. In this capacity, the Vice President and Chief Engineer is responsible for directing and supervising the Engineering Department as shown in Figure IV.2-5.
In this capacity, the Vice President and Chief Engineer is responsible for directing and supervising the Engineering Department as shown in Figure IV.2-5.4l The Vice President and Chief Engineer has the responsibility for preparing drawings and specifications for the procurement of materials and components for plant maintenance and modifi-cation as required.He is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing unique maintenance and repair procedures for major equipment.
The Vice President and Chief Engineer has the responsibility for preparing drawings and specifications for the procurement of materials and components for plant maintenance and modifi-cation as required. He is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna 4l      Station Superintendent and for reviewing unique maintenance and repair procedures for major equipment.
3)The Manager, Quality Assurance, is responsible for estab-lishing and executing the overall quality assurance program.2:)He is responsible for assuring that the program satisfies Revision 7.November 198 0  
3     The Manager, Quality Assurance, is responsible for estab-
      )
lishing and executing the overall quality assurance program.
2:)   He is responsible for assuring that the program satisfies Revision 7 .
November 198 0


the requirements of lOCFR50, Appendix B, and for keeping the total program updated.He is responsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and reliably are establish'ed and followed.He provides management with objective information concerning quality, independent of the individual or group directly responsible for performing the specific activity.He has the authority and organizational freedom to assure all necessary quality affecting activities are performed.
the requirements of 10CFR50, Appendix B, and for keeping the total program updated. He is responsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and reliably are establish'ed and followed. He provides management with objective information concerning quality, independent of the individual or group directly responsible for performing the specific activity. He has the authority and organizational freedom to assure all necessary quality affecting activities are performed. He is responsible for maintaining a quality assurance staff, Figure IV.2-1, for the conduct of staff training, for directing its activities and for establishing and implementing a comprehensive audit program.
He is responsible for maintaining a quality assurance staff, Figure IV.2-1, for the conduct of staff training, for directing its activities and for establishing and implementing a comprehensive audit program.The Manager, Quality Assurance is a graduate engineer with at.least six years of responsible experience, of which two years i: s in quality assurance and three years in the design or operation of nuclear or fossil fuel power plants.0 The Manager, Quality Assurance and the Quality Assurance Staff are responsible for supervising both the on-site and off-site Quality Assurance program.This includes writing Quality Assurance policies and procedures, and reviewing the procedures of the organizations participating in the Quality Assurance program.They are also responsible for auditing all aspects of the Quality Assurance Program and for ensuring significant conditions adverse to quality are corrected.
The Manager, Quality Assurance is a graduate engineer with at. least six years of responsible experience, of which two years i:s in quality assurance and three years in the design or operation of nuclear or fossil fuel power plants.
They are responsible for assuxing that proper codes, standards, and quality requirements are specified in design, procurement, and installation documents.
0 The Manager, Quality Assurance and the Quality Assurance Staff are responsible for supervising both the on-site and off-site Quality Assurance program. This includes writing Quality Assurance policies and procedures, and reviewing the procedures of the organizations participating in the Quality Assurance program. They are also responsible for auditing all aspects of the Quality Assurance Program and for ensuring significant conditions adverse to quality are corrected. They are responsible for assuxing that proper codes, standards, and quality requirements are specified in design, procurement, and installation documents. They are responsible for assuring that the suppliers of safety-related material, equipmeng and services are properly qualified, and they are responsible for conducting audits and surveillances at these, supplier.'s facilities. In ad-
They are responsible for assuring that the suppliers of safety-related material, equipmeng and services are properly qualified, and they are responsible for conducting audits and surveillances at these, supplier.'s facilities.
'ition,   the staff assists the Manager, Quality Assurance, in the preparation of the audit schedule, audit status reports, corrective action report summaries and in the preparation and maintenance of the Quality Assurance Procedures Manual.
In ad-'ition, the staff assists the Manager, Quality Assurance, in the preparation of the audit schedule, audit status reports, corrective action report summaries and in the preparation and maintenance of the Quality Assurance Procedures Manual.IV-6 Revision 7 November 1980>I  
Revision 7 November 1980 IV-6                      >I


The Purchasing Agent is responsible for the procurement of materials, services, and components, from qualified suppliers, in accordance with applicable commercial, technical, and quality requirements.
The Purchasing   Agent is responsible for the procurement of materials, services, and components, from qualified suppliers, in accordance with applicable commercial, technical, and quality requirements. He maintains a listing of qualified suppliers determined through an evaluation made by Purchasing, Engineering, Quality Assurance and the other involved depart-ments as appropriate.
He maintains a listing of qualified suppliers determined through an evaluation made by Purchasing, Engineering, Quality Assurance and the other involved depart-ments as appropriate.
The Ginna Station Superintendent is responsible to the Superintendent, Nuclear Production for safe operation of Ginna Station. He is responsible for the performance of the Ginna Station operation, maintenance, repair, refueling, inservice inspection, modification, test and inspection quality affecting activities in accordance with the require-ments of the quality assurance program. He is responsible for providing qualified personnel to perform these activi-ties in accordance with approved drawings, specifications, and procedures. He is also responsible for those items delineated in Section 6.0, Technical Specifications.
The Ginna Station Superintendent is responsible to the Superintendent, Nuclear Production for safe operation of Ginna Station.He is responsible for the performance of the Ginna Station operation, maintenance, repair, refueling, inservice inspection, modification, test and inspection quality affecting activities in accordance with the require-ments of the quality assurance program.He is responsible for providing qualified personnel to perform these activi-ties in accordance with approved drawings, specifications, and procedures.
The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging his respon-sibilities. He is responsible for the day-to-day operation of the station and implementing the policies," procedures, and directions of the Ginna Station Superintendent.
He is also responsible for those items delineated in Section 6.0, Technical Specifications.
The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for supervising the station Quality Control Organization, which is responsible for assuring that activities affecting quality are prescribed and carried out in accordance with approved drawings, specifications, and procedures. In his day-to-day acti-vities, the Quality Control Engineer reports to the Ginna Station Assistant Superintendent and is a member of the Plant Operations Review Committee. He also reviews pro-curement documents initiated at the station. He is responsible for the coordination of inspection activities 4 and for assuring that inspection requirements are included in approved procedures. He is also responsible for the receipt inspection of incoming materials, parts, and com-ponents and the processing of nonconformance reports. He coordinates the processing of corrective action reports, and assures that corrective action is taken. He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superin-tendent with objective information concerning the quality of
The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging his respon-sibilities.
  'hese activities.
He is responsible for the day-to-day operation of the station and implementing the policies," procedures, and directions of the Ginna Station Superintendent.
The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which reviews documents and which performs inspection and surveillance activities. Additional inspectors are assigned to this group as required by the level of work activities.
The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for supervising the station Quality Control Organization, which is responsible for assuring that activities affecting quality are prescribed and carried out in accordance with approved drawings, specifications, and procedures.
Revision 4 December l978
In his day-to-day acti-vities, the Quality Control Engineer reports to the Ginna Station Assistant Superintendent and is a member of the Plant Operations Review Committee.
He also reviews pro-curement documents initiated at the station.He is responsible for the coordination of inspection activities 4 and for assuring that inspection requirements are included in approved procedures.
He is also responsible for the receipt inspection of incoming materials, parts, and com-ponents and the processing of nonconformance reports.He coordinates the processing of corrective action reports, and assures that corrective action is taken.He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superin-tendent with objective information concerning the quality of'hese activities.
The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which reviews documents and which performs inspection and surveillance activities.
Additional inspectors are assigned to this group as required by the level of work activities.
Revision 4 December l978  


In addition to the Ginna Station Quality Control Engineer, the Ginna Station, Superintendent is assisted by other desig-nated staff members, Figure IV.2-3, in the implementation of certain quality assurance program requirements at the plant.These staff members are assigned responsibility for testing, storage of material and equipment, operating and test, status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling and modification.
In addition to the Ginna Station Quality Control Engineer, the Ginna Station, Superintendent is assisted by other desig-nated staff members, Figure IV.2-3, in the implementation of certain quality assurance program requirements at the plant.
The Director, Strategic and Fuel Planning is responsible for coordinating all activities related to the procurement of nuclear fuel.These duties include the coordination, pre-paration and execution of the contracts and their supporting documents used to control the procurement.
These staff members are assigned responsibility for testing, storage of material and equipment, operating and test, status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling and modification.
Fuel Planning also coordinates bid evaluation and recommends selection of the successful bidder.The Superintendent, General Maintenance, is responsible for supervising and directing a staff, Figure IV.2-4, which supervises the performance and verification of safety related maintenance, repair and modification activities performed at the General Maintenance facility.He is also responsible for the routine maintenance of material handling equipment, control of special processes and establishment of the inservice inspection program.The General Maintenance Quality Control Coordinator is responsible to the Superintendent, General Maintenance, for performing or directing the performance of verification activities for which General Maintenance Quality Control is responsible.
The Director, Strategic and Fuel Planning is responsible for coordinating all activities related to the procurement of nuclear fuel. These duties include the coordination, pre-paration and execution of the contracts and their supporting documents used to control the procurement.     Fuel Planning also coordinates   bid evaluation and recommends   selection of the successful bidder.
In this capacity he is responsible for assuring that activities, affecting, quality, are carried out in accordance with approved drawings, specifications and proce-dures.He is also responsible, for the preparation of Quality Maintenance procedures and for the training of General Maintenance personnel in the implementation of these procedures.
The Superintendent, General Maintenance, is responsible for supervising and directing a staff, Figure IV.2-4, which supervises the performance and verification of safety related maintenance, repair and modification activities performed at the General Maintenance facility. He is also responsible for the routine maintenance of material handling equipment, control of special processes and establishment of the inservice inspection program.
He also reviews procurement documents initiated by General Maintenance, coordinates receipt inspection of incoming materials, parts and components, performs routine surveillance of General Maintenance activities and coordinates the process-ing of nonconformance reports., corrective action reports and the replies to audit reports.The Supervisor, Materials Engineering is responsible to the Superintendent, General Maintenance for the development and qualification of procedures utilized for special processes.
The General Maintenance Quality Control Coordinator is responsible to the Superintendent, General Maintenance, for performing or directing the performance of verification activities for which General Maintenance Quality Control is responsible. In this capacity he is responsible for assuring that activities, affecting, quality, are carried out in accordance with approved drawings, specifications and proce-dures. He is also responsible, for the preparation of Quality Maintenance procedures and for the training of General Maintenance personnel in the implementation of these procedures.
Revision 7 November 1980 0
He also reviews procurement documents initiated by General Maintenance, coordinates receipt inspection of incoming materials, parts and components, performs routine surveillance of General Maintenance activities and coordinates the process-ing of nonconformance reports., corrective action reports and the replies to audit reports.
He is also responsible for, assuring that personnel are trained and qualified for activities involving nondestructive exami-nation and for providing functional guidance and direction in those methods for which he is a qualified Level III.He is also responsible for establishing'he inservice inspection program.The Superintendent, Electric Meter and Laboratory is responsible for providing routine maintenance and testing services for Ginna Station safety related protective relays as requested.
The Supervisor, Materials Engineering is responsible to the Superintendent, General Maintenance for the development and qualification of procedures utilized for special processes.
IV.3 Desi n Control Design activities are performed by Rochester Gas and Electric Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.IV-8 a Revision 7 November 1980
Revision 7 November 1980
 
0 He is also responsible for, assuring that personnel are trained and qualified for activities involving nondestructive exami-nation and for providing functional guidance and direction in those methods for which he is a qualified Level III. He is also responsible for establishing'he inservice inspection program.
The Superintendent, Electric Meter and Laboratory is responsible for providing routine maintenance and testing services for Ginna Station safety   related protective relays as requested.
IV.3 Desi n Control Design activities are performed by Rochester Gas and Electric Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.
Revision  7 November 1980 IV-8 a


E ngineering is responsible for the design and control of design activities (including design interfaces) for major modifications of structures, systems or components.
E ngineering is responsible for the design and control of design activities (including design interfaces) for major modifications of structures, systems or components.
4I Ginna Station is responsible for the design and control of 4 design activities for minor modifications of structures, sys-tems, or components.
4I Ginna Station is responsible for the design and control of design activities for minor modifications of structures, sys-Ginna Station is also responsible for 4
Ginna Station is also responsible for classifying station originated modifications as either Major or Minor.Engineering reviews and concurs with modifications being classified as Minor.Minor modifications typically involve (1)component changes which involve vendor design and'imited to the extent that the change does not impact existing performance requirements.
tems, or components.
(2)Additions within Seismic Category I buildings which perform no safety functions and which either interface with Seismic Category I items or whose failure could reduce the functioning of any safety related component required for safe shutdown of the plant to an unacceptable level.(3)Changes to a safety related system determined not to be major (i.e.vents, drains, alarms, indicating lights, etc.).Design control is implemented by means of procedures which include: design considerations, design review requirements; internal and external interface control considerations; design document review, approval, distribution, control, and revision requirements; and corrective action.Design con-siderations include, as appropriate:
classifying station originated modifications as either Major or Minor. Engineering reviews and concurs with modifications being classified as Minor. Minor modifications typically involve (1) component changes which involve vendor design and to the extent that the change does not impact existing     'imited performance requirements.       (2) Additions within Seismic Category I buildings which perform no safety functions and which either interface with Seismic Category I items or whose failure could reduce the functioning of any safety related component required for safe shutdown of the plant to an unacceptable level. (3)
physics, stress, materials, thermal, hydraulic, radiation and accident analysis;(appropriate design bases, codes, standards and regulations; I acceptability for operation, maintenance and repair;acceptance (and rejection criteria;quality standards and other quality)assurance requirements.
Changes to a safety related system determined not to be major (i.e.vents, drains, alarms, indicating lights, etc.).
Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests as appropriate to assure the adequacy of the design.The design of plant modifications is verified by an engineer other than the one who performed the original design.For Major modification design, this may be done by Engineering department design engineers or consulting engineers as re-quested.For Minor modification station design, this may be done by Ginna Station and or Engineering department design engineers as appropriate.
Design control is implemented by means of procedures which include: design considerations, design review requirements; internal and external interface control considerations; design document review, approval, distribution, control, and revision requirements; and corrective action. Design con-siderations include, as appropriate: physics, stress, materials, thermal, hydraulic, radiation and accident analysis;
Spare or replacement parts must at least meet the original equipment technical and quality requirements.
( appropriate   design bases, codes, standards and regulations; I acceptability for operation,     maintenance and repair; acceptance
For plant modifications, standard"off-the-shelf" commercial or pre-viously approved materials, parts, and equipment are selected and reviewed for suitability of application by the design engineer.Design changes, are normally reviewed and approved in accord-ance with the same procedures as the original design.Supple-mental procedures are established for the review and approval of field changes.In general, design changes including field changes, are reviewed and approved by the organizations or IV-9 Revision 5 April l979 V I'J I I I J(I JV f-I I',~I P J I E 1 I I I, I I I P'I V I II I'V I V'I il F I V Vg I individuals that performed the original design, review and approval.Where this is not practical, other responsible design organizations or individuals designated, provided they have access to pertinent background information and are com-petent in the specific design area.Design verification and field change systems are methods utilized to detect, document and correct design process errors and deficiencies.
( and rejection criteria; quality standards       and other quality
In addition, the corrective action system, described in section IV.16, is utilized to control and docu-ment corrective action to preclude recurrence of those design 4 process errors and deficiencies which are considered to be a significant condition adverse to quality.3 Qua 1 ity Assurance is responsib 1 e f or assuring that des i gn control procedures, whether the work is done by Rochester Gas and Electric or by other organizations, are prepared and implemented and incorporate appropriate design control practices, checks, and reviews.Design control procedures are reviewed to assure that an independent verification is perf ormed.IV-9a Revision 5 April 1979 P P 1 0  
  ) assurance   requirements. Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests as appropriate to assure the adequacy of the design.
~~5/Engineering and Ginna Station are responsible for establishing
The design of plant modifications is verified by an engineer other than the one who performed the original design. For Major modification design, this may be done by Engineering department design engineers or consulting engineers as re-quested. For Minor modification station design, this may be done by Ginna Station and or Engineering department design engineers as appropriate.
'easures for the proper control of design documents and re-visions there-to, to assure that distribution is to responsible individuals and in a timely manner to prevent inadvertent use of superseded design information.
Spare or replacement parts must at least meet the original equipment technical and quality requirements.         For plant modifications, standard "off-the-shelf" commercial or pre-viously approved materials, parts, and equipment are selected and reviewed for suitability of application by the design engineer.
The measures include the use of document.revision levels, document transmittals, release stamps, field change request forms and distribution lists.Design documents are collected, stored, and maintained in accordance with Section IV.6 and IV.17, as appropriate.
Design changes,   are normally reviewed and approved in accord-ance with the same procedures as the original design. Supple-mental procedures are established for the review and approval of field changes. In general, design changes including field changes, are reviewed and approved by the organizations or IV-9           Revision 5 April l979
Design documents include design criteria, analyses, speci-fications, drawings, design review records, and changes thereto.5 4<J3 Quality Assurance and Station Quality Control through pre-paration assistance and/or review assure the proper inclusion.
 
of quality standards in the design of major and minor modifications, respectively.
V I'J I
Quality Assurance is also responsible for assuring that adequate inspection requirements are included in specifications.
I I
The Manager, Quality Assurance reviews and approves any deviations from quality standards when they occur.Plant modifications are controlled by means of applicable 3 Ginna Station, Engineering-and Quality Assurance procedures.
JV I
These procedures provide for the preparation, review, and approval of design documents, safety analyses, and plant modification procedures.
I',
Proposed plant modifications are reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.
J(
IV.4 Procurement Document Control Procurement document control applies to the control of procurement documents for materials, parts, components, and services required to perform quality affecting activities.
f- I
Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, contracts, specifications; and drawings.3[Procurement of materials, parts, components, and services is-~initiated by department staff personnel.
                      ~
Procurement proce-dures require that organizations preparing procurement documents consider and include, as appropriate, the items listed in Table IV.4-1.Revision 6 July 1979  
I P J I E
1         I I I,             I I
I I
P' V
I II I 'V I           V 'I il F
I                         V Vg I
 
individuals that performed the original design, review and approval. Where this is not practical, other responsible design organizations or individuals designated, provided they have access to pertinent background information and are com-petent in the specific design area.
Design   verification and field change systems are methods utilized to detect,   document and correct design process   errors and   deficiencies. In addition, the corrective action system, described in section IV.16, is utilized to control and docu-ment corrective action to preclude recurrence of those design 4 process   errors and deficiencies which are considered to be a significant condition adverse to quality.
Qua 1 ity Assurance is responsib 1 e for assuring that des ign 3
control procedures, whether the work is done by Rochester Gas and Electric or by other organizations, are prepared and implemented and incorporate appropriate design control practices, checks, and reviews. Design control procedures are reviewed to assure that an independent verification is perf ormed.
Revision 5 April 1979 IV-9a
 
P P 1
0
 
~ ~
Engineering and Ginna Station are responsible for establishing
            'easures for the proper control of design documents and re-5/      visions there-to, to assure that distribution is to responsible individuals and in a timely manner to prevent inadvertent use of superseded design information. The measures include the use of document. revision levels, document transmittals, release stamps, field change request forms and distribution lists.
Design documents are collected, stored, and maintained in accordance with Section IV.6 and IV.17, as appropriate.
Design documents include design criteria, analyses, speci-fications, drawings, design review records,   and changes thereto.
Quality Assurance and Station Quality Control through pre-paration assistance and/or review assure the proper inclusion. of quality standards in the design of major and 4< J3  minor modifications, respectively. Quality Assurance is also responsible for assuring that adequate inspection requirements are included in specifications. The Manager, 5          Quality Assurance reviews and approves any deviations from quality standards when they occur.
Plant modifications are controlled by means of applicable 3   Ginna Station, Engineering -and Quality Assurance procedures.
These procedures provide for the preparation, review, and approval of design documents, safety analyses, and plant modification procedures. Proposed plant modifications are reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.
IV. 4       Procurement Document Control Procurement document control applies to the control of procurement documents for materials, parts, components, and services required to perform quality affecting activities.
Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, contracts, specifications; and drawings.
Procurement of materials, parts, components, and services is 3
            -~initiated by department staff personnel. Procurement proce-
[
dures require that organizations preparing procurement documents consider and include, as appropriate, the items listed in Table IV.4-1.
Revision   6 July 1979


Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station and General Maintenance are reviewed by Quality Control and approved by the department superintendent or his designated representative.
Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station and General Maintenance are reviewed by Quality Control and approved by the department superintendent or his designated representative.
Procurement documents initiated in Engineering and Quality Assurance are reviewed by Quality Assurance and approved by the Chief Engineer, or designees.
Procurement documents initiated in Engineering and Quality Assurance are reviewed by Quality Assurance and approved by the Chief Engineer, or designees. Procurement documents for nuclear fuel are initiated by the fuel management staff, reviewed by Quality Assurance and approved by the Director, Strategic   and Fuel Planning.
Procurement documents for nuclear fuel are initiated by the fuel management staff, reviewed by Quality Assurance and approved by the Director, Strategic and Fuel Planning.Procurement, documents initiated at Electric Meter and~Laboratory are reviewed by Quality Assurance and approved by the department superintendent or designated alternate.
Procurement, documents initiated at Electric   Meter and
Evidence of review and approval of procurement.
~
documents is recorded on the documents or on the attached control form.The attached control form identifies to Purchasing a procure-ment method which will ensure that the selected supplier is capable of providing the item or service in accordance with the requirements of the procurement documents.
Laboratory are reviewed by Quality Assurance and approved by the department superintendent or designated alternate.
Considerations used in selecting a supplier and for determining the corres-ponding procurement method are described in Section IV.7 After purchase requistions, service agreements, contracts, specifications, and drawings have received the required re-views and approvals, a purchase order is issued by Purchasing to the selected supplier and controlled as described in Section IV.7.These documents are maintained by Purchasing, by the originating department, and/or by the receiving locations, as appropriate, until procurement is completed.
Evidence of review and approval of procurement. documents is recorded on the documents or on the attached control form.
Under no circumstances are purchasing requirements altered (except for quantity or pricing)during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve the original documents as described above.Changes or revisions to procurement documents are subject to the same review and approval requirements as the original documents.
The attached control form identifies to Purchasing a procure-ment method which will ensure that the selected supplier is capable of providing the item or service in accordance with the requirements of the procurement documents. Considerations used in selecting a supplier and for determining the corres-ponding procurement method are described in Section IV.7 After purchase requistions, service agreements, contracts, specifications, and drawings have received the required re-views and approvals, a purchase order is issued by Purchasing to the selected supplier and controlled as described in Section IV.7. These documents are maintained by Purchasing, by the originating department, and/or by the receiving locations, as appropriate, until procurement is completed.
Originating department technical review of procurement documents includes verification of applicable regulatory, code and design requirements.
Under no circumstances are purchasing requirements altered (except for quantity or pricing) during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve the original documents as described above. Changes or revisions to procurement documents are subject to the same review and approval requirements as the original documents.
Quality Assurance/
Originating department technical review of procurement documents includes verification of applicable regulatory, code and design requirements. Quality Assurance/ Quality Control review of the above includes checks to verify proper inclusion of quality standard, quality assurance program requirements,   method or procurement and the applicable acceptance   criteria. Quality Control also reviews procure-ment documents for spare or replacement paits for adequacy of quality requirements and to determine similarity, compati-bility, and the inclusion of the quality requirements and acceptance criteria of the original design.
Quality Control review of the above includes checks to verify proper inclusion of quality standard, quality assurance program requirements, method or procurement and the applicable acceptance criteria.Quality Control also reviews procure-ment documents for spare or replacement paits for adequacy of quality requirements and to determine similarity, compati-bility, and the inclusion of the quality requirements and acceptance criteria of the original design.IV-11 Revision 5 April 1979 t I IV.5 Instructions Procedures and Drawin s Each Rochester Gas and Electric company organization is responsible for developing, reviewing, approving, and imple-menting procedures as required to implement the quality assurance program.These procedures cover activities such as document control, training of personnel, and responsibili-ties and duties of personnel.
Revision  5 IV-11         April 1979
Quality Assurance reviews and concurs with th'ese procedures.
 
Table IV.1-1 provides a summary'f the subject matter contained in the procedures which are used to implement the quality assurance program.Procurement documents require suppliers and contractors to have appropriate instructions, procedures, specifications, and drawings.IV-11a I Revision 5 April 1979 1 f N'''f!CI 1 I f P'$k1 P f ll Ginna Station is responsible for providing and implementing instructions and procedures associated with operation, maintenance, repair, in-service inspection, refueling, modification, testing and, inspection.
t I
This includes instructions and procedures listed in USAEC Regulatory Guide 1.33 for administrative control;general plant operation; startup, operation, and shutdown of safety related systems;correction of abnormal, offnormal, or alarm conditions, combat of emergencies and other significant events;radioactivity control;control of measuring and test equipment; chemical and radiochemical control;and fuel handling and refueling.
 
Ginna Station is responsible for the preparation and implementation of quality control inspec-tion procedures utilized for detailed station inspection activities.
IV.5 Instructions   Procedures and Drawin s Each Rochester Gas and Electric company organization is responsible for developing, reviewing, approving, and imple-menting procedures as required to implement the quality assurance program. These procedures cover activities such as document control, training of personnel, and responsibili-ties and duties of personnel. Quality Assurance reviews and concurs with th'ese procedures. Table IV.1-1 provides a summary'f the subject matter contained in the procedures which are used to implement the quality assurance program.
Ginna Station is responsible for appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the completion of plant modifications.
Procurement documents require suppliers and contractors to have appropriate instructions, procedures, specifications, and drawings.
Ginna Station is also responsible for the preparation and issuance of those minor modification design documents not provided by Engineering or the equipment supplier.General Maintenance is responsible for providing and for implementing instructions and procedures associated with special processes, the routine maintenance and inspection of cranes and handling equipment, as well as shop work required to support Ginna Station maintenance, repair and modification activities.
Revision  5 April  1979 IV-11a I
General Maintenance is also responsible for the preparation and for the implementation of quality control inspection procedures utilized for detailed inspection activities at their facilities.
 
Electric Meter and Laboratory is responsible for the prepara-tion and implementation of relay inspection and testing procedures as required to direct detailed inspections and testing activities for which they are responsible.
  !f 1 f f
Electric Meter and Laboratory also'assists in the preparation of routine relay maintenance and testing procedures used by their personnel in the annual Ginna Station protective relay surveillance program.Engineering is responsible for providing approved specifi-cations, and drawings associated with major modifications and when minor modifications necessitate drawings or specifi-cations.These documents require those performing the work to obtain, understand, and comply with appropriate procedures, specifications and drawings.Engineering has established procedures for revising drawings and specifications.
CI N
These procedures cover updating of as-built drawings after plant"modifications and the revision, approval, distribution, and control of all drawings and specifications.
                      ''' 1 I
Revision 7 November 1980  
P'$           k1 P                             f ll
 
Ginna Station is responsible for providing and implementing instructions and procedures associated with operation, maintenance, repair, in-service inspection, refueling, modification, testing and, inspection. This includes instructions and procedures listed in USAEC Regulatory Guide 1.33 for administrative control; general plant operation; startup, operation, and shutdown of safety related systems; correction of abnormal, offnormal, or alarm conditions, combat of emergencies and other significant events; radioactivity control; control of measuring and test equipment; chemical and radiochemical control; and fuel handling and refueling. Ginna Station is responsible for the preparation and implementation of quality control inspec-tion procedures utilized for detailed station inspection activities. Ginna Station is responsible for appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the completion of plant modifications. Ginna Station is also responsible for the preparation and issuance of those minor modification design documents not provided by Engineering or the equipment supplier.
General Maintenance is responsible for providing and for implementing instructions and procedures associated with special processes, the routine maintenance and inspection of cranes and handling equipment, as well as shop work required to support Ginna Station maintenance, repair and modification activities. General Maintenance is also responsible for the preparation and for the implementation of quality control inspection procedures utilized for detailed inspection activities at their facilities.
Electric Meter and Laboratory is responsible for the prepara-tion and implementation of relay inspection and testing procedures as required to direct detailed inspections and testing activities for which they are responsible. Electric Meter and Laboratory also'assists in the preparation of routine relay maintenance and testing procedures used by their personnel in the annual Ginna Station protective relay surveillance program.
Engineering is responsible for providing approved specifi-cations, and drawings associated with major modifications and when minor modifications necessitate drawings or specifi-cations. These documents require those performing the work to obtain, understand, and comply with appropriate procedures, specifications and drawings. Engineering has established procedures for revising drawings and specifications. These procedures cover updating of as-built drawings   after plant "modifications and the revision, approval, distribution, and control of all drawings and specifications.
Revision 7 November 1980
 
Persons  preparing and approving documents are responsible for assuring that specifications, instructions, procedures, and drawings include appropriate quantitative or qualitative acceptance criteria for determining that important activities have been satisfactorily accomplished and assuring that the documents are kept current.
indoctrination and training of personnel is provided by the responsible organizations to ensure that quality affecting activities are conducted in accordance with established documents. 1n addition, surveillance by Quality Control personnel, as described in Section XV.10 and audits by Quality Assurance as described in Section IV.18 are used to verify that quality affecting activities are being performed in accordance with approved instructions, procedures and drawings.
XV.6 Document  Control Procedures are established to control the issuance of pro-cedures, instructions, drawings, and specifications. Standard document control requirements are contained in the Quality Assurance Manual. The Ginna Station Superintendent is responsible for the control of all documents issued at Ginna Station. General Maintenance and Electric Meter and Labora-tory are responsible for the control of documents issued by their respective organizations. Engineering controls all documents issued by Engineering, Quality Assurance and Purchasing. Each organization controlling documents has a separate procedure to control documents in accord-ance with the requirements of the Quality Assurance Manual.
The Quality Assurance Manual designates responsibilities and defines requirements for the preparation, review and approval of documents. Each department responsible for an activity is responsible for providing the necessary review and approval of instructions, procedures or drawings to assure that they are adequte, and include appropriate quali-tative and quantitative requirements. Departmental Quality Control representatives review departmental maintenance, repair, refueling and modification procedures, prior to use, to assure quality assurance requirements are included. The Plant Operations Review Committee has the responsibility for reviewing Ginna Station procedures prior to their approval as required by Section 6.0 Technical Specifications. Detailed inspection, test and examination procedures used by qualified personnel require the review and concurrence of the responsible technical person associated with that activity. Ginna Station, General Maintenance, Engineering, Purchasing, and Electric Meter and Laboratory quality assurance implementing procedures require the review and concurrence of Quality Assurance and the approval of the appropriate department supervisor.
Revision 4 December 1978
 
h lj
 
Quality Assurance .procedures are approved by the Manager, Quality Assurance.
The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of document involved, its importance to safety, and the intended use of the document. It specifies the types of documents which must be controlled; identifies the difference between con-trolled and uncontrolled copies of the same document; includes the method for identifying holders of controlled copies; requires that only controlled copies of a document be used for official purposes; requires that lists of effective revisions be issued periodically; requires lists of document holders to be maintained by the distributors; and requires that distributors transmit controlled documents using approved forms internally and externally.
Types of documents which are controlled include Technical Specifications, FSAR, Technical Supplements, Quality Assur-ance Manual, procedures (such as quality assurance, engineering, purchasing, repair, maintenance, test, cali-bration, fuel handling, modification, and administrative),
specifications and drawings. Suppliers of materials, equipment, and services are required in procurement documents to provide for control of documents, including manufacturing, inspection and testing instructions.
The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to assure that documents are available when required; to pro-perly review and approve documents such as procedures, instructions, specifications, and drawings; to provide the same reviews and approvals for changes to documents as was required of the original document; to require that organiza-tions which review and approve documents have access to pertinent information and adequate knowledge of the original document intent; to assure that approved changes are promptly transmitted for incorporation into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.
Quality Assurance and the Quality Control organizations,      in the responsible departments, are responsible for      review and concurrence of procurement documents and, therefore, procure-ment document control requirements.
Quality Assurance and the Quality Control organizations are further responsible for review, inspection, surveillance, and  audit, as  appropriate, of document control systems to assure adequate  systems  are implemented.
Revision 4 December 1978
 
Ih Ip
 
Control of Purchased Material  E ui ment and Services Procurement documents, supplier selection, planning for item or service acceptance control of supplier performance and acceptance of items and services are five major means used in controlling purchased material, equipment and services.
All procurement is conducted in accordance with procurement documents as stated in Section IV-4. All reviews, inspec-tions, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier is capable of providing acceptable, quality products.
Procurement planning is utilized by the procuring organiza-tions for determining the methods to be used for acceptance of the item or service as well as requirements for the control of the supplier performance. Source inspection (surveillance) certificate of conformance, receipt inspection and post instal-lation test are methods which are considered for item acceptance with receipt inspection utilized in the acceptance of all items.
In lieu of these methods, acceptance of services is based on either or a combination of: (1) surveillance of the activity and (2) review of objective evidence for conformance to the procurement document requirements (i.e. certifications, stress reports etc.). The extent of the acceptance methods and as-sociated verification activities will vary and be a function of the relative importance and complexity of the purchased item or service and the suppliers past performance.
Consideration for the control of supplier performance includes 5  the necessity for document submittals or surveillance, and under what situation the supplier is to report nonconformances.
Results of the planning are incorporated in the procurement documents and or on the attached procurement control form as described in Section IV.4.
Selection of a supplier is based on the evaluation of its capability to provide the item or services in accordance with the requirements of the procurement documents. The evaluation which is accomplished during the procurement planning, deter-:
mines the necessity for the'upplier selection to be from the approved suppliers list maintained by Purchasing. Purchasing utilizes the approved suppliers list for the selection source of those suppliers required to have a satisfactory quality assurance program. The evaluation guidelines for source se-lection considers the item complexity, method(s) of acceptance and for a replacement item,  if the source is to be restricted to the original supplier. For engineered and off-the-shelf items, procured from suppliers required to have a quality assurance program and for which item acceptance is based other than on receipt inspection, supplier selection is from the approved suppliers list or one who is in the process of being added to the list, after having had its capability evaluated Revision  5 si                                        April  1979
 
t!
t
 
to purchaser satisfaction. Other off-the-shelf items, that are manufactured to industry standards, that are typically utilized in applications other than nuclear, and for which item acceptance is based exclusively on receipt inspection may be purchased from sources other than the approved suppliers list. These other sources may include the manufacturer of the replacement part, authorized distributor for the manufacturer's replacement parts and distributor of catalog items which satisfy the guidelines of not requiring status on the approved suppliers list. Departmental procedures establish guidelines for source selection evaluations and for documenting the results on the procurement control form through, indication of the corresponding procurement method. The purchase requisition will also identify the source when replacement parts are to be procured from the original equipment supplier.
Addition of a supplier to the approved suppliers list is based on satisfactory evaluation of the supplier's capability by Quality Assurance, Purchasing and other departments, as appropriate.
For Engineered items, Engineering is responsible for evalu-4I ating 'the overall d'esign or manufacturing capability of the supplier including his particular technical ability to produce the design, service, item, or component delineated in the procurement documents. As part of this review, the supplier's design capabilities, machinery capabilities, handling capabilities, testing facilities, service capabili-ties, and experience are reviewed.
Quality Assurance is responsible for, evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric requirements.
The review includes consideration of: company organization, quality assurance personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices, accept-ance criteria, 'required quality assurance records and their retention, and quality assurance, requirements and controls imposed by the supplier on his subcontractors.      Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assur-ance requirements.
4( Ginna  Station, General Maintenance, Quality Assurance  and Electric Meter and Laboratory evaluate the suppliers of inspection, test, and calibration services which they intend S n/ to use.
The departments  responsible for performing supplier evalu-ations shall document -their results in reports which discuss areas investigated, findings, and conclusions. As applicable, concurrence of Purchasing, Engineering, Quality Assurance, I
Revision  5 IV-15a      April  1979
 
C' 7
0
  )'  ~
LI
 
I Ginna    Station, General Maintenance, Electric Meter and 4I  Laboratory and Fuel Planning is required to place a supplier 3 on the qualified suppliers'ist.        One organization can remove a supplier from the list without concurrence of the others.
Measures are established by Engineering and Quality Assurance to control supplier performance for engineered items. These measures typically include the processing of change infor-mation, surveillance of supplier activities and the control of documents exchanged with the supplier. In addition, each department procuring off-the-shelf items or services establishes similar measures for the control of supplier performance. With the exception of processing change information, the need for and applicable extent of purchaser controls of the supplier are determined during procurement planning.
Quality Assurance is responsible for determining and document-ing the degree of supplier surveillance (including review, inspection, or audit) required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance. The objective of supplier surveil-lance is to provide a sampling review of the supplier's quality assurance program implementation and of product conformance with respect to the purchase order requirements.
For complex engineered items, Quality Assurance and Engi-neering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be  reviewed.
T he  results of the surveillance trip are documented by means of inspection sheets or trip reports which are distributed 3 to the Manager, Quality Assurance,      and the department which initiated the procurement. When a deviation from purchase order requirements is noted, the Quality Assurance represen-tative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work,    if necessary.
4IGinna Station Quality Control is responsible for surveillance of site contractors to assure that they meet all technical and quality requirements.      The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.
The verification methods for the acceptance of items and services. are specified on the attached procurement control form during procurement planning and the purchase requisition preparation.
Department superintendents are responsible for receiving and storing items pending their acceptance. Upon receipt, the IV-16 Revision  5 April  1979


Persons preparing and approving documents are responsible for assuring that specifications, instructions, procedures, and drawings include appropriate quantitative or qualitative acceptance criteria for determining that important activities have been satisfactorily accomplished and assuring that the documents are kept current.indoctrination and training of personnel is provided by the responsible organizations to ensure that quality affecting activities are conducted in accordance with established documents.
F
1n addition, surveillance by Quality Control personnel, as described in Section XV.10 and audits by Quality Assurance as described in Section IV.18 are used to verify that quality affecting activities are being performed in accordance with approved instructions, procedures and drawings.XV.6 Document Control Procedures are established to control the issuance of pro-cedures, instructions, drawings, and specifications.
                          'L r EE     II           r
Standard document control requirements are contained in the Quality Assurance Manual.The Ginna Station Superintendent is responsible for the control of all documents issued at Ginna Station.General Maintenance and Electric Meter and Labora-tory are responsible for the control of documents issued by their respective organizations.
                                      ; ty F
Engineering controls all documents issued by Engineering, Quality Assurance and Purchasing.
                              )
Each organization controlling documents has a separate procedure to control documents in accord-ance with the requirements of the Quality Assurance Manual.The Quality Assurance Manual designates responsibilities and defines requirements for the preparation, review and approval of documents.
fF     i           C f
Each department responsible for an activity is responsible for providing the necessary review and approval of instructions, procedures or drawings to assure that they are adequte, and include appropriate quali-tative and quantitative requirements.
I I           ,'I
Departmental Quality Control representatives review departmental maintenance, repair, refueling and modification procedures, prior to use, to assure quality assurance requirements are included.The Plant Operations Review Committee has the responsibility for reviewing Ginna Station procedures prior to their approval as required by Section 6.0 Technical Specifications.
                                            'F' F F
Detailed inspection, test and examination procedures used by qualified personnel require the review and concurrence of the responsible technical person associated with that activity.Ginna Station, General Maintenance, Engineering, Purchasing, and Electric Meter and Laboratory quality assurance implementing procedures require the review and concurrence of Quality Assurance and the approval of the appropriate department supervisor.
* 1 1
Revision 4 December 1978 h lj Quality Assurance.procedures are approved by the Manager, Quality Assurance.
I
The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of document involved, its importance to safety, and the intended use of the document.It specifies the types of documents which must be controlled; identifies the difference between con-trolled and uncontrolled copies of the same document;includes the method for identifying holders of controlled copies;requires that only controlled copies of a document be used for official purposes;requires that lists of effective revisions be issued periodically; requires lists of document holders to be maintained by the distributors; and requires that distributors transmit controlled documents using approved forms internally and externally.
                                                'I E
Types of documents which are controlled include Technical Specifications, FSAR, Technical Supplements, Quality Assur-ance Manual, procedures (such as quality assurance, engineering, purchasing, repair, maintenance, test, cali-bration, fuel handling, modification, and administrative), specifications and drawings.Suppliers of materials, equipment, and services are required in procurement documents to provide for control of documents, including manufacturing, inspection and testing instructions.
E F
The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to assure that documents are available when required;to pro-perly review and approve documents such as procedures, instructions, specifications, and drawings;to provide the same reviews and approvals for changes to documents as was required of the original document;to require that organiza-tions which review and approve documents have access to pertinent information and adequate knowledge of the original document intent;to assure that approved changes are promptly transmitted for incorporation into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.Quality Assurance and the Quality Control organizations, in the responsible departments, are responsible for review and concurrence of procurement documents and, therefore, procure-ment document control requirements.
U
Quality Assurance and the Quality Control organizations are further responsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.
Revision 4 December 1978 Ih Ip Control of Purchased Material E ui ment and Services Procurement documents, supplier selection, planning for item or service acceptance control of supplier performance and acceptance of items and services are five major means used in controlling purchased material, equipment and services.All procurement is conducted in accordance with procurement documents as stated in Section IV-4.All reviews, inspec-tions, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier is capable of providing acceptable, quality products.Procurement planning is utilized by the procuring organiza-tions for determining the methods to be used for acceptance of the item or service as well as requirements for the control of the supplier performance.
Source inspection (surveillance) certificate of conformance, receipt inspection and post instal-lation test are methods which are considered for item acceptance with receipt inspection utilized in the acceptance of all items.In lieu of these methods, acceptance of services is based on either or a combination of: (1)surveillance of the activity and (2)review of objective evidence for conformance to the procurement document requirements (i.e.certifications, stress reports etc.).The extent of the acceptance methods and as-sociated verification activities will vary and be a function of the relative importance and complexity of the purchased item or service and the suppliers past performance.
Consideration for the control of supplier performance includes 5 the necessity for document submittals or surveillance, and under what situation the supplier is to report nonconformances.
Results of the planning are incorporated in the procurement documents and or on the attached procurement control form as described in Section IV.4.Selection of a supplier is based on the evaluation of its capability to provide the item or services in accordance with the requirements of the procurement documents.
The evaluation which is accomplished during the procurement planning, deter-: mines the necessity for the'upplier selection to be from the approved suppliers list maintained by Purchasing.
Purchasing utilizes the approved suppliers list for the selection source of those suppliers required to have a satisfactory quality assurance program.The evaluation guidelines for source se-lection considers the item complexity, method(s)of acceptance and for a replacement item, if the source is to be restricted to the original supplier.For engineered and off-the-shelf items, procured from suppliers required to have a quality assurance program and for which item acceptance is based other than on receipt inspection, supplier selection is from the approved suppliers list or one who is in the process of being added to the list, after having had its capability evaluated si Revision 5 April 1979 t!t 4I to purchaser satisfaction.
Other off-the-shelf items, that are manufactured to industry standards, that are typically utilized in applications other than nuclear, and for which item acceptance is based exclusively on receipt inspection may be purchased from sources other than the approved suppliers list.These other sources may include the manufacturer of the replacement part, authorized distributor for the manufacturer's replacement parts and distributor of catalog items which satisfy the guidelines of not requiring status on the approved suppliers list.Departmental procedures establish guidelines for source selection evaluations and for documenting the results on the procurement control form through, indication of the corresponding procurement method.The purchase requisition will also identify the source when replacement parts are to be procured from the original equipment supplier.Addition of a supplier to the approved suppliers list is based on satisfactory evaluation of the supplier's capability by Quality Assurance, Purchasing and other departments, as appropriate.
For Engineered items, Engineering is responsible for evalu-ating'the overall d'esign or manufacturing capability of the supplier including his particular technical ability to produce the design, service, item, or component delineated in the procurement documents.
As part of this review, the supplier's design capabilities, machinery capabilities, handling capabilities, testing facilities, service capabili-ties, and experience are reviewed.4(S n/Quality Assurance is responsible for, evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of lOCFR50 Appendix B, and Rochester Gas and Electric requirements.
The review includes consideration of: company organization, quality assurance personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices, accept-ance criteria,'required quality assurance records and their retention, and quality assurance, requirements and controls imposed by the supplier on his subcontractors.
Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assur-ance requirements.
Ginna Station, General Maintenance, Quality Assurance and Electric Meter and Laboratory evaluate the suppliers of inspection, test, and calibration services which they intend to use.The departments responsible for performing supplier evalu-ations shall document-their results in reports which discuss areas investigated, findings, and conclusions.
As applicable, concurrence of Purchasing, Engineering, Quality Assurance, I IV-15a Revision 5 April 1979 C'7 0)'~LI 4I I Ginna Station, General Maintenance, Electric Meter and Laboratory and Fuel Planning is required to place a supplier 3 on the qualified suppliers'ist.
One organization can remove a supplier from the list without concurrence of the others.Measures are established by Engineering and Quality Assurance to control supplier performance for engineered items.These measures typically include the processing of change infor-mation, surveillance of supplier activities and the control of documents exchanged with the supplier.In addition, each department procuring off-the-shelf items or services establishes similar measures for the control of supplier performance.
With the exception of processing change information, the need for and applicable extent of purchaser controls of the supplier are determined during procurement planning.Quality Assurance is responsible for determining and document-ing the degree of supplier surveillance (including review, inspection, or audit)required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance.
The objective of supplier surveil-lance is to provide a sampling review of the supplier's quality assurance program implementation and of product conformance with respect to the purchase order requirements.
For complex engineered items, Quality Assurance and Engi-neering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.T he results of the surveillance trip are documented by means of inspection sheets or trip reports which are distributed 3 to the Manager, Quality Assurance, and the department which initiated the procurement.
When a deviation from purchase order requirements is noted, the Quality Assurance represen-tative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work, if necessary.
4IGinna Station Quality Control is responsible for surveillance of site contractors to assure that they meet all technical and quality requirements.
The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.
The verification methods for the acceptance of items and services.are specified on the attached procurement control form during procurement planning and the purchase requisition preparation.
Department superintendents are responsible for receiving and storing items pending their acceptance.
Upon receipt, the IV-16 Revision 5 April 1979 F'L r EE II r F)fF i f;ty C I I ,'I'F F*1 1 I'F''I E E F U department stockkeeper logs the item, places a"hold" tag on the item, and notifies Quality Control that the item has arrived.Quality Control is responsible for receipt inspection upon 3 de 1 ivery of items and associated services f or maintenance, repair, modification, and refueling.
This inspection in-cludes the use of written procedures or checklists to verify that the items and services conform to the procurement docu-ments (if this has not been performed by source inspections) and that, documentary evidence of conformance is available at the plant prior to installation or use.Documentary evidence sufficient to identify the codes, standards or specifications met by the purchased material, equipment, and services is~~retained.In the event a final source inspection for the 4 acceptance is conducted prior to receipt by RGGE, Quality Control performs an inspection for shipping damage or lost parts and a document check to assure that the required docu-mentation has been reviewed and is complete.A receiving inspection checklist is completed for all items received to document the extent of the inspection performed, including the documents checked, and the inspection results.If the item and documentation are adequate, Quality Control labels the item as"Accepted," files the documentation and receipt inspection results, and releases the item for storage or use.If the item is nonconforming or the documentation 4[pIis unsatisfactory, Quality Control initiates a nonconformance report which is controlled in accordance with Section IV.15.n All items issued must bear an acceptance tag and have docu-mentation to support the acceptability of the item.In the event the traceability is lost or the documentation review is unsatisfactory, the item becomes nonconforming and may not be released for use.IV.8 Identification and Control of Materials Parts and The identification and control of materials, parts, and components is accomplished in accordance with written requirements and applies to material, parts, or components in any stage of fabrication, storage, or installation.
Identification and control requirements are established by either an existing, procedure or requirements documents which are prepared during the planning stages of a project.The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports;specification of the degree of identification to preclude a degradation of the item's functional capability IV-17 Revision 5 April 1979 I~~I.t I I I'1 I~1~II~g I, or quality;and the proper identification of materials,.parts, and components prior to release, for manufacturing, shipping, construction, and installation.
2(Engineering and Quality Assurance are responsible for assuring that drawings and specifications contain appropriate require-ments for the identification and control of materials, parts, or components, as appropriate.
Suppliers are required to assure that all required documentation for an item is prop-erly identified and related to the item.Each item is re-quired to be physically identified, either by marking on the=item or by tags.Physical identification by purchase order number is used to the maximum extent possible for IV-17a Revision 5 April 1979
~~'4))r~'f, ,h relating an item at any time to applicable documentation.
Identification is either on the item or records traceable to the item.Where physical identification is impractical, physical separation, procedural control, or other appro-priate means are employed.The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant.Procedures covering the identification and control of materials, parts, and components at the plant are approved by the Ginna Station Superintendent.
The.superintendents of other departments which receive material which is to be stored away from the plant are responsible for establishing procedures, for identification and control and for maintaining identification and control of material, parts, or components, stored or used in their area of responsibility.
In the event that traceability is lost for a specific item, it is handled as nonconforming material and deviations and waivers are controlled and documented in accordance with Section IV.15.IV.9 Control of S ecial Processes Written procedures are established to control special pro-cesses, such as welding, heat treating, and nondestructive examination to assure compliance with applicable codes, standards, and design specifications.
Qualification of personnel and procedures complies with the requirements of applicable codes and.standards.
When special process qualifi-cation requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification requirements.
4 3"3 Initiators of procurement activities are responsible for requiring suppliers, in procurement documents, to control special processes in accordance with the above requirements.
Quality Assurance and Quality Control personnel are respon-sible for reviewing procurement documents to ensure that requirements for control of special processes are included.7 3t Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Materials Engineering.
Special process procedures submitted by suppliers and con-tractors are reviewed and concurred with by Materials Engi-neering.The Ginna Station Maintenance Engineer and Quality Control Engineer are responsible for assuring that personnel per-forming special processes under their cognizance are quali-fied and are using qualified procedures in accordance with Revision 7 November 1980 IV-18


applicable codes, specifications, and standards.
department stockkeeper logs the item, places a "hold" tag on the item, and notifies Quality Control that the item has arrived.
The Supervisor, Materials Engineering is responsible for the qualification of NDE personnel and procedures.
Quality Control is responsible for receipt inspection upon de 1 ivery of items and associated services for maintenance, 3
The Super-visor, Materials Engineering is responsible for the qualifi-cation of welding procedures and the training and qualifi-cation of welders.Engineering maintains records for personnel and procedures to demonstrate that required qualifications have been obtained and are kept current.Quality Assurance and Quality Control perform surveillance inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.
repair, modification, and refueling. This inspection in-cludes the use of written procedures or checklists to verify that the items and services conform to the procurement docu-ments (if this has not been performed by source inspections) and that, documentary evidence of conformance is available at the plant prior to installation or use. Documentary evidence sufficient to identify the codes, standards or specifications met by the purchased material, equipment, and services is retained. In the event a final source inspection for the
Procedures prepared for the control of activities include inspection requirements and hold points as required by drawings, instructions, requirements documents, specifications, codes, standards, or regulatory requirements.
                    ~
For clarification and to distinguish from preventative maintenance inspections the following controls are associated with the quality assurance function inspections and referred to as verification inspec-tions.Instructions for conducting detailed verification inspections are contained in inspection procedures.
4 acceptance    is conducted prior to receipt by RGGE, Quality
These inspection procedures and all supporting specifications and drawings are provided to inspection personnel for use prior to performing the inspection.
                        ~
Inspection requirements and hold points are utilized to verify conformance of activities to the documented instructions, specifications, and drawings for accomplishing the activity.Inspection procedures in-clude the identification of quality characteristics to be inspected, a description of the method of inspection to be used, the identification of the group responsible for per-forming the inspection, thy acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.Verification inspections are performed by qualified inspection personnel who are independent of the personnel performing the work.Outside contractors are required by procurement documents to have and follow similar procedures and to use independent inspectors.
Control performs an inspection for shipping damage or lost parts and a document check to assure that the required docu-mentation has been reviewed and is complete. A receiving inspection checklist is completed for all items received to document the extent of the inspection performed, including the documents checked, and the inspection results.
Inspectors are sufficiently trained to adequately evaluate the activity they are inspecting.
If  the item and documentation are adequate, Quality Control labels the item as "Accepted," files the documentation and receipt inspection results, and releases the item for storage or use. If the item is nonconforming or the documentation 4[pIis unsatisfactory, Quality Control     initiates a nonconformance report which is controlled in accordance with Section IV.15.
41 Quality Control personnel are responsible for performing veri-fication inspections, as required, during plant operation, maintenance, repair, in-service inspection, refueling, modi-fication, and testing when the work is performed by Rochester Gas and Electric personnel.
n All items    issued must bear an acceptance tag and have docu-mentation to support the acceptability of the item. In the event the traceability is lost or the documentation review is unsatisfactory, the item becomes nonconforming and may not be released for use.
When the work is performed by outside contractors, Quality Control is responsible for sur-veillance of the subcontractor's inspection activities.
IV. 8      Identification    and Control of Materials  Parts  and The   identification and control of materials, parts, and components is accomplished in accordance with written requirements and applies to material, parts, or components in any stage of fabrication, storage, or installation.
All inspection equipment is calibrated and controlled in accordance with Section IV.12.Calibration status is verified by inspection personnel prior to performing an inspection operation.
Identification and control requirements are established by either an existing, procedure or requirements documents which are prepared during the planning stages of a project. The identification and control requirements cover items such as:
Revision 7-'ovember 1980 0
traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports; specification of the degree of identification to preclude a degradation of the item's functional capability IV-17        Revision 5 April  1979
In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing methods, equipment, and personnel is provided.Both inspection and process monitoring are required when control is inadequate without both.5(4~3I2[Quality Assurance is responsible for the adequate inclusion of 7)inspection requirements in specif ications.3 4 The Ginna Station Quality Control Engineer is responsible for assuring that adequate inspection requirements and hold points are included in maintenance, repair, refueling, modification and testing procedures.
He is also responsible for the assignment, of qualified inspection personnel required for inspection of quality affecting activities and for coordinating the performance of and conducting the surveil-lance of inservice inspection.
The General Maintenance Quality Control Coordinator is responsible for assuring that adequate inspection require-ments are included in procedures', instructions and/or checklists controlling maintenance, modification and repair activities and related fabrication processes at the General Maintenance facility.With the exception of that which pertains to Pump and Valve Testing, the Supervisor, Materials Engineering is responsible for establishing the requirements for the Inservice Inspection Program.Quality Assurance is responsible for establishing the requirements for the Inservice Pump and Valve Testing Program.The program for inservice inspection of the reactor coolant system and other safety related systems is contained in Section 4.2, Technical Specifications.
IV.11 Test Control Whenever testing is requix'ed to demonstrate that a material, part, component, or system will perform satisfactorily in service, a test program is instituted employing written and approved procedures which are in accordance with basic requirements established in Technical Specifications, draw-ings, instructions, procurement documents, specifications, codes, standards, and regulatory requirements.
The test program requires the identification, control, and documen-tation of all tests, and the preparation of written proce-dures required for satisfactory accomplishment of the testing.Written test procedures and checklists include: necessary test equipment and calibration requirements; material require-ments;test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria;instruc-tions for disposition of deviations; data collection require-ments;and test result approval.IV-20 Revision 7 November 1980


The Ginna Station Superintendent is responsible for the station test program, which includes the surveillance test program required by Section 4.0, Technical Specifications and testing associated with modifications.
I
Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Control, and approved by the Ginna Station Superintendent.
      ~    ~
The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved procedures.
I.
When contractors are employed for tests, the contractor is requried to perform testing in accordance with his quality assurance program requirements.
t I
All test results are required to be docu-mented, reviewed, and approved by those responsible for performing the test.6f ,3 4:3 5 When requested by Ginna Station, Electric Meter and Laboratory performs test activities to determine the cause of protective relay malfunctions.
I      I' 1
These test activities are performed in accordance with approved procedures by qualified personnel.
I
Engineering and Quality Assurance are responsible for assuring that required tests for major modifications are included in specifications.
    ~ 1~
Engineering assistance in the preparation of modification-related test procedures may be provided to the Ginna Station staff.The Ginna Station Technical Engi-neer is responsible for the adequate inclusion of test re-quirements in minor modification design documents and for reviewing modification-related test results for acceptability to design requirements.
II
Reviews of minor modification design by Station Quality Control verifies adequate inclusion of test requirements.
                            ~ g I,
IV.12 Control of Measurin and Test E ui ment The calibration and control system for measuring and test equipment includes calibration procedures, establishment of calibration frequencies, and maintenance and control require-ments of measuring and test instruments, tools, gauges, shop standards, and nondestructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems, and structures.
 
Calibration procedures include step-by-step methods for calibration and requirements for instrument accuracy.Calibration frequency is based on required accuracy, degree of usage, stability characteristics, manufacturer's recommendations, experience, and other condi-tions affecting measurement capability.
or quality; and the proper identification of materials,
6 Revision 6 July 1979 I
.parts, and components prior to release, for manufacturing, shipping, construction, and installation.
Control of measuring and test equip'ment requires: a recall.system assuring timely calibration of equipment; a system providing unique identification of equipment, traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing trace-ability of shop standards*to nationally recognized standards (where national standards do not exist, procedures contain instructions to document the basis for calibration) and periodic revalidation of shop standards; a system providing Revision 6 July 1979 XV-21a I
2(Engineering and Quality Assurance are responsible for assuring that drawings and specifications contain appropriate require-ments for the identification and control of materials, parts, or components, as appropriate. Suppliers are required to assure that all required documentation for an item is prop-erly identified and related to the item. Each item is re-quired to be physically identified, either by marking on the =
for records to be maintained which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration dates;and a system controlling the purchase requirements of new equipment to be entered into the calibration and control system including require-ments for accuracy, stability, and repeatability under normal use conditions.
item or by tags. Physical identification by purchase order number is used to the maximum extent possible for Revision  5 IV-17a        April  1979
In the event a measuring instrument is found out of calibration, an investigation is conducted to determine the validity of previous measurements.
 
The Ginna Station Superintendent is resonsible for the procedures and program required to assure control and calibration of measuring and test equipment at Ginna Station in accordance with the above requirements.
    ~~
Instruments specified in Section 4.1, Technical Specifications, are included in the program.Tools, gauges, and instruments necessary for maintenance, inspection, and test are cali-brated and controlled in accordance with station procedures.
          '4
Measuring, test or inspection equipment used by Quality Control is included in the program.The Superintendent, General Maintenance, and Superintendent, Electric Heter and Laboratory, are responsible for establish-ing a program and the preparation of procedures for the control and calibration of measuring and test equipment used by their respective departments.
            ))
'JV.13 Etandlin Stora e and Shi in 4)The Ginna Station Superintendent is responsible for develop-ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located at Ginna Station.The Superintendent, General Maintenance, and the Superintendent, Electric Meter and Laboratory, are responsible for preparing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located in their work areas.In addition, the Superintendent, General Maintenance, is responsible for preparing and implement-ing procedures for the routine maintenance and inspection of lifting and handling equipment.
r
Under normal circumstances, manufacturer's specific written instructions and recommen-dations and purchase, specification requirements are invoked for cleanliness, preservation, special handling, and storage with respect to environmental requirements.
~ '
In the absence of, or in addition to, specific manufacturer requirements, the department superintendent may invoke additional require-ments in accordance with department procedures.
f,
The Chief Engineer is responsible for specifying in procurement documents and in engineering specifications that written procedures be used, as, appropriate, for the handling, shipping, storage, cleaning,, and preservation of materials and equipment IV-22 Revision 4 December 1978  
                  ,h
 
relating an item at any time to applicable documentation.
Identification is either on the item or records traceable to the item. Where physical identification is impractical, physical separation, procedural control, or other appro-priate means are employed.
The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant. Procedures covering the identification and control of materials, parts, and components at the plant are approved by the Ginna Station Superintendent. The. superintendents of other departments which receive material which is to be stored away from the plant are responsible for establishing procedures, for identification and control and for maintaining identification and control of material, parts, or components, stored or used in their area of responsibility.
In the event that traceability is lost for a specific item, it  is handled as nonconforming material and deviations and waivers are controlled and documented in accordance with Section IV.15.
IV. 9    Control of S ecial Processes Written procedures are established to control special pro-cesses, such as welding, heat treating, and nondestructive examination to assure compliance with applicable codes, standards, and design specifications. Qualification of personnel and procedures complies with the requirements of applicable codes and. standards. When special process qualifi-cation requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification requirements.
Initiators of procurement activities are responsible for 4    3 requiring suppliers, in procurement documents, to control special processes in accordance with the above requirements.
Quality  Assurance and Quality Control personnel are respon-
    "3 sible for reviewing procurement documents to ensure that requirements for control of special processes are included.
Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Materials Engineering.
7    3t Special process procedures submitted by suppliers and con-tractors are reviewed and concurred with by Materials Engi-neering.
The Ginna Station Maintenance Engineer and Quality Control Engineer are responsible for assuring that personnel per-forming special processes under their cognizance are quali-fied and are using qualified procedures in accordance with Revision 7 November 1980 IV-18
 
applicable codes, specifications, and standards. The Supervisor, Materials Engineering is responsible for the qualification of NDE personnel and procedures. The Super-visor, Materials Engineering is responsible for the qualifi-cation of welding procedures and the training and qualifi-cation of welders. Engineering maintains records for personnel and procedures to demonstrate that required qualifications have been obtained and are kept current.
Quality Assurance and Quality Control perform surveillance inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.
Procedures  prepared for the control of activities include inspection requirements and hold points as required by drawings, instructions, requirements documents, specifications, codes, standards, or regulatory requirements. For clarification and to distinguish from preventative maintenance inspections the following controls are associated with the quality assurance function inspections and referred to as verification inspec-tions. Instructions for conducting detailed verification inspections are contained in inspection procedures. These inspection procedures and all supporting specifications and drawings are provided to inspection personnel for use prior to performing the inspection. Inspection requirements and hold points are utilized to verify conformance of activities to the documented instructions, specifications, and drawings for accomplishing the activity. Inspection procedures in-clude the identification of quality characteristics to be inspected, a description of the method of inspection to be used, the identification of the group responsible for per-forming the inspection, thy acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity. Verification inspections are performed by qualified inspection personnel who are independent of the personnel performing the work.
Outside contractors are required by procurement documents to have and follow similar procedures and to use independent inspectors. Inspectors are sufficiently trained to adequately evaluate the activity they are inspecting.
Quality Control personnel are responsible for performing veri-41 fication inspections, as required, during plant operation, maintenance, repair, in-service inspection, refueling, modi-fication, and testing when the work is performed by Rochester Gas and  Electric personnel. When the work is performed by outside contractors, Quality Control is responsible for sur-veillance of the subcontractor's inspection activities. All inspection equipment is calibrated and controlled in accordance with Section IV.12. Calibration status is verified by inspection personnel prior to performing an inspection operation.
Revision  7 1980
                                                      -'ovember
 
0 In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing methods, equipment, and personnel is provided.
Both inspection and process monitoring are required when control is inadequate without both.
5(4~ 3I2[ Quality Assurance is responsible for the adequate inclusion of 7 )
inspection requirements in specif ications.
The Ginna Station Quality Control Engineer is responsible for assuring that adequate inspection requirements and hold 4
3 points  are included in maintenance, repair, refueling, modification and testing procedures. He is also responsible for the assignment, of qualified inspection personnel required for inspection of quality affecting activities and for coordinating the performance of and conducting the surveil-lance of inservice inspection.
The General Maintenance Quality Control Coordinator is responsible for assuring that adequate inspection require-ments are included in procedures', instructions and/or checklists controlling maintenance, modification and repair activities and related fabrication processes at the General Maintenance  facility.
With the exception of that which pertains to Pump and Valve Testing, the Supervisor, Materials Engineering is responsible for establishing the requirements for the Inservice Inspection Program. Quality Assurance is responsible for establishing the requirements for the Inservice Pump and Valve Testing Program. The program for inservice inspection of the reactor coolant system and other safety related systems is contained in Section 4.2, Technical Specifications.
IV.11 Test Control Whenever testing is requix'ed to demonstrate that a material, part, component, or system will perform satisfactorily in service, a test program is instituted employing written and approved procedures which are      in accordance with basic requirements established      in  Technical  Specifications, draw-ings, instructions, procurement      documents,    specifications, codes, standards,    and  regulatory  requirements. The test program requires  the  identification,    control,  and  documen-tation of  all tests,  and  the  preparation  of  written  proce-dures required for    satisfactory  accomplishment    of  the  testing.
Written test procedures      and  checklists  include:      necessary test equipment and calibration requirements; material require-ments; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria; instruc-tions for disposition of deviations; data collection require-ments; and test result approval.
IV-20            Revision    7 November 1980
 
The Ginna    Station Superintendent is responsible for the station    test program, which includes the surveillance test program required by Section 4.0, Technical Specifications and testing associated with modifications.
Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Control, and approved by the Ginna Station Superintendent.          The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved procedures. When contractors are employed for tests, the contractor is requried to perform testing in accordance with his quality assurance program requirements.      All test results are required to be docu-mented, reviewed, and approved by those responsible for performing the test.
When requested by Ginna Station, Electric Meter and Laboratory performs test activities to determine the cause
        ,3 of protective relay malfunctions. These test activities are performed in accordance with approved procedures by qualified personnel.
Engineering and Quality Assurance are responsible for assuring that required tests for major modifications are included in specifications. Engineering assistance in the preparation of modification-related test procedures may be provided to 4:3 the Ginna Station staff. The Ginna Station Technical Engi-5      neer is responsible for the adequate inclusion of test re-quirements in minor modification design documents and for reviewing modification-related test results for acceptability 6f to design requirements. Reviews of minor modification design by Station Quality Control verifies adequate inclusion of test requirements.
IV.12 Control of Measurin and Test E ui ment The  calibration and control system for measuring and test equipment includes calibration procedures, establishment of calibration frequencies, and maintenance and control require-ments of measuring and test instruments, tools, gauges, shop standards, and nondestructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems, and structures.      Calibration procedures include step-by-step    methods  for calibration  and requirements for  instrument  accuracy. Calibration  frequency  is based on required accuracy, degree of usage, stability        characteristics, manufacturer's recommendations, experience, and other condi-tions affecting    measurement  capability.
Revision  6 6                                                  July  1979
 
I Control of measuring and test equip'ment requires: a recall
.system assuring timely calibration of equipment; a system providing unique identification of equipment, traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing trace-ability of shop standards*to nationally recognized standards (where national standards do not exist, procedures contain instructions to document the basis for calibration) and periodic revalidation of shop standards; a system providing Revision  6 July  1979 XV-21a
 
I for records to  be maintained which  indicate the complete status of all items under the    calibration  system including the maintenance, calibration results,    abnormalities, and last and future calibration dates;    and  a system controlling the purchase requirements of new equipment to be entered into the calibration and control system including require-ments for accuracy, stability, and repeatability under normal use conditions. In the event a measuring instrument is found out of calibration, an investigation is conducted to determine the validity of previous measurements.
The Ginna Station Superintendent is resonsible for the procedures and program required to assure control and calibration of measuring and test equipment at Ginna Station in accordance with the above requirements. Instruments specified in Section 4.1, Technical Specifications, are included in the program. Tools, gauges, and instruments necessary for maintenance, inspection, and test are cali-brated and controlled in accordance with station procedures.
Measuring, test or inspection equipment used by Quality Control is included in the program.
The Superintendent, General Maintenance, and Superintendent, Electric Heter and Laboratory, are responsible for establish-ing a program and the preparation of procedures for the control and calibration of measuring and test equipment used by their respective departments.
'JV.13  Etandlin  Stora  e  and Shi  in The Ginna Station Superintendent is    responsible for develop-ing and implementing procedures for    the handling, storage, shipping, preservation, and cleaning    of material and equipment delivered to or located at Ginna Station. The Superintendent, General Maintenance, and the Superintendent, Electric Meter and Laboratory, are responsible for preparing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located in their work areas. In addition, the Superintendent, General Maintenance, is responsible for preparing and implement-
: 4) ing procedures for the routine maintenance and inspection of lifting and handling equipment. Under normal circumstances, manufacturer's specific written instructions and recommen-dations and purchase, specification requirements are invoked for cleanliness, preservation, special handling, and storage with respect to environmental requirements. In the absence of, or in addition to, specific manufacturer requirements, the department superintendent may invoke additional require-ments in accordance with department procedures.
The Chief Engineer is responsible for specifying in procurement documents and in engineering specifications that written procedures be used, as, appropriate, for the handling, shipping, storage, cleaning,, and preservation of materials and equipment IV-22             Revision 4 December 1978


procured for modifications.
procured for modifications. These procedures are prepared by contractors, by the station staff, or by staff members of General Maintenance or Electric Meter and Laboratory, as appropriate. Rochester Gas and Electric procedures are reviewed and approved as described in Section IV.6.
These procedures are prepared by contractors, by the station staff, or by staff members of General Maintenance or Electric Meter and Laboratory, as appropriate.
Ln the preparation of procurement documents, department procedures, and contractor procedures, consideration of handling, shipping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of'manufacturing and installation prior to operational acceptance.
Rochester Gas and Electric procedures are reviewed and approved as described in Section IV.6.Ln the preparation of procurement documents, department procedures, and contractor procedures, consideration of handling, shipping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of'manufacturing and installation prior to operational acceptance.
Quality Assurance is responsible for review of engineering specifications to assure that proper handling, storing, and shipping requirements have been specified. Quality Control is responsible for surveillance of handling, storage, and shipping activities by suppliers, Rochester Gas and Electric personnel, and contractors.
Quality Assurance is responsible for review of engineering specifications to assure that proper handling, storing, and shipping requirements have been specified.
IV.14 Ins ection Test and 0 eratin Status Equipment or systems not ready for normal service are clearly identified by use of tags, control logs, and other suitable means to indicate the status in a positive manner. The identification is sufficient to positively indicate the status of the particular equipment or system being isolated.
Quality Control is responsible for surveillance of handling, storage, and shipping activities by suppliers, Rochester Gas and Electric personnel, and contractors.
The Ginna Station Superintendent is responsible for indicat-ing the status of operating equipment or systems to be removed from service for maintenance, repair, or modification in accordance with the approved Rochester Gas and Electric Intra-Station Holding Rules. The Ginna Station Superintendent designates personnel who have station holding authority.
IV.14 Ins ection Test and 0 eratin Status Equipment or systems not ready for normal service are clearly identified by use of tags, control logs, and other suitable means to indicate the status in a positive manner.The identification is sufficient to positively indicate the status of the particular equipment or system being isolated.The Ginna Station Superintendent is responsible for indicat-ing the status of operating equipment or systems to be removed from service for maintenance, repair, or modification in accordance with the approved Rochester Gas and Electric Intra-Station Holding Rules.The Ginna Station Superintendent designates personnel who have station holding authority.
Personnel who have station holding authority are responsible for directing the status change of equipment and systems in accordance with the approved company Intra-Station Holding Rules. System status is indicated through the use of hold tags and control logs.
Personnel who have station holding authority are responsible for directing the status change of equipment and systems in accordance with the approved company Intra-Station Holding Rules.System status is indicated through the use of hold tags and control logs.Equipment or system inspection and test status are indicated by use of test tags, labels,'r work inspection and test status sheets.Written procedures control the use of hold tags,.test tags, and labels.The procedures require the recording of the name of the person placing and removing the tag.Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.
Equipment or system inspection and test status are indicated by use of test tags, labels,'r work inspection and test status sheets. Written procedures control the use of hold tags, .test tags, and labels. The procedures require the recording of the name of the person placing and removing the tag.
IV-23 Revision 4 December 1978  
Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.
IV-23           Revision 4 December 1978


Fuel handling operations involving fuel assemblies or other radioactive sources are identified and controlled by the use of tags, stamps, or other suitable means.Maintenance, repair, or modification of components, systems, or structures utilizes procedures, travelers, data sheets and checklists to indicate status of the work, inspections and tests and corresponding acceptance or rejection for a par-ticular component, system, or structure.
Fuel handling operations involving fuel assemblies or other radioactive sources are identified and controlled by the use of tags, stamps, or other suitable means.
These job control forms are prepared jointly by the job supervisor and Quality Control and maintained at a designated control location to indicate the status and the completion of required inspection's and tests.Quality Control monitors the status change activities for their compliance to approved procedures and assures that inspection results are properly logged.Quality Control also establishes the procedures for implementing the inspection status sheets utilized during inservice inspection.
Maintenance, repair, or modification of components, systems, or structures utilizes procedures, travelers, data sheets and checklists to indicate status of the work, inspections and tests and corresponding acceptance or rejection for a par-ticular component, system, or structure. These job control forms are prepared jointly by the job supervisor and Quality Control and maintained at a designated control location to indicate the status and the completion of required inspection's and tests.
Quality Control monitors the status change activities for their compliance to approved procedures and assures that inspection results are properly logged. Quality Control also establishes the procedures for implementing the inspection status sheets utilized during inservice inspection.
IV.15 Nonconformin Materials Parts and Com onents Procedures are established for the control, evaluation and disposition of deficient material, parts, and components.
IV.15 Nonconformin Materials Parts and Com onents Procedures are established for the control, evaluation and disposition of deficient material, parts, and components.
Materials, parts, or components which do not conform to the drawing or specification requirements are identified with a hold tag and reported on a nonconformance rep'ort.Quality Control is responsible for issuing nonconformance reports, recommending disposition, initiating repair or rework, and inspecting and approving repaired or reworked items.Prior to installation or use, nonconforming items generally remain in a Quality Control receiving inspection area until approved.disposition has been received.Nonconforming items which are released for installation to meet critical fabrication schedules are controlled by Quality Control to prevent inadvertant use prior to clearance of the nonconformance.
Materials, parts, or components which do not conform to the drawing or specification requirements are identified with a hold tag and reported on a nonconformance rep'ort. Quality Control is responsible for issuing nonconformance reports, recommending disposition, initiating repair or rework, and inspecting and approving repaired or reworked items. Prior to installation or use, nonconforming items generally remain in a Quality Control receiving inspection area until approved.
After installation or use, nonconforming items are identi-fied and controlled until approved disposition has been received.Nonconformances identified at a supplier's facility and reported to RGSE, which have supplier recommended diposi-tions of use-as-is, or repair, are normally processed by the department originating the procurement.
disposition has been received. Nonconforming items which are released for installation to meet critical fabrication schedules are controlled by Quality Control to prevent inadvertant use prior to clearance of the nonconformance.
Organizations which specify the requirement being dispositioned are responsible for reviewing and approving the supplier recommended disposition.
After installation or use, nonconforming items are identi-fied and controlled until approved disposition has been received.
This also applies to nonconformances discovered after receipt inspection, during handling or after installation or use.Items are repaired and reworked only in accordance with approved procedures and current drawings.Quality Control assures that approved procedures and/or drawings are avail-rv-24 Revision 5 April 1979 I II 4 I able for use prior to the repair or rework and reinspects all repaired or reworked items.The repair or rework must be verified as acceptable by an inspection of the affected item which is at least equal to the original inspection method.'V-24a Revision 5 April 1979 I~I r 4 Jy II N items which are accepted"use-as-is" are fully documented with the drawing'or specification requirement and technical justification for acceptance.
Nonconformances identified at a supplier's facility and reported to RGSE, which have supplier recommended diposi-tions of use-as-is, or repair, are normally processed by the department originating the procurement. Organizations which specify the requirement being dispositioned are responsible for reviewing and approving the supplier recommended disposition.
All such items are approved prior to use by the cognizant organization having responsi-4 bility for the requirement.
This also applies to nonconformances discovered after receipt inspection, during handling or after installation or use.
In addition, those"use-as-is" nonconformances which also deviate from a Design Criteria requirement shall require additional approval of the Vice 2[President, Electric and Steam Production.
Items are repaired and reworked only in accordance with approved procedures and current drawings. Quality Control assures that approved procedures and/or drawings are avail-Revision  5 rv-24       April 1979
3~Quality Control issues monthly nonconformance report summaries~which are reviewed and analyzed hy Quality Assurance.
 
Unsatisfactory trends are reported to management by means of the.corrective action report in accordance with Section IV.16.IV.16 Corrective Action Quality Assurance establishes the requirements for identi-fication, review and correction of significant conditions adverse to quality.Significant conditions adverse to quality such as failures, malfunctions, deficiencies, deviations,.defective material and equipment, and non-conformances are reported on a corrective action report.Significant conditions'dverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high maintenance items, and operating procedure deficiencies.
I II 4
The corrective'ction report identifies the condition, the cause of the condition, and the corrective action taken.41 Corrective action reports may be initiated by Quality Assur-ance, Engineering, Ginna Station, Fuel Planning, General Maintenance, Electric Meter and Laboratory or Purchasing staff personnel.
I
Corrective action reports initiated at Ginna Station" and General Maintenance are submitted to Quality Control for review and subsequent processing.
 
able for use prior to the repair or rework and reinspects all repaired or reworked items. The repair ofor the rework must affected be verified as acceptable by an inspection item which is at least equal to the original inspection method.'V-24a Revision   5 April 1979
 
I ~ I r 4 Jy II N
 
items which are accepted "use-as-is" are fully documented with the drawing 'or specification requirement and technical justification for acceptance. All such items are approved responsi-prior to use by the cognizant organization having"use-as-is" 4 bility for the requirement.       In addition, those nonconformances which also deviate from a Design Criteria requirement shall require additional approval of the Vice 2[ President,     Electric and Steam Production.
3~ Quality Control issues monthly nonconformance report summaries
        ~
which are reviewed and analyzed hy Quality Assurance.
Unsatisfactory trends are reported to management by means of the .corrective action report in accordance with Section IV.16.
IV.16 Corrective Action Quality Assurance establishes the requirements for identi-fication, review and correction of significant conditions adverse to quality. Significant conditions adverse to quality such as failures, malfunctions, deficiencies, deviations, .defective material and equipment, and non-conformances are reported on a corrective action report.
Significant conditions'dverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high maintenance items, and operating procedure deficiencies. The corrective'ction report identifies the condition, the cause of the condition, and the corrective action taken.
Corrective action reports may be initiated by Quality Assur-41    ance, Engineering, Ginna Station, Fuel Planning, General Maintenance, Electric Meter and Laboratory or Purchasing staff personnel. Corrective action reports initiated at Ginna Station" and General Maintenance are submitted to Quality Control for review and subsequent processing.
Corrective action reports initiated by departments other than at Ginna Station or General Maintenance are reviewed and processed by Quality Assurance.
Corrective action reports initiated by departments other than at Ginna Station or General Maintenance are reviewed and processed by Quality Assurance.
W hen a significant condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect 2 of continuing the activity.If continuing the activity would cover up or preclude identification and correction of the deficiency, continuing the activity would increase the extent of the deficiency or lead to an unsafe condition, stop work action is taken.The Ginna Station Quality Control 3 Engineer has authority to stop work on maintenance, repair, inservice inspection, refueling, modification, testing or inspection deficiencies, at Ginna Station.The Ginna Station Quality Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.
When a significant condition adverse   to quality at Ginna Station is identified, Quality Control evaluates the affect 2
IV-25 Revision 4 December 1978  
of continuing the activity. If continuing the activity would cover up or preclude identification and correction of the deficiency, continuing the activity would increase the extent of the deficiency or lead to an unsafe condition, stop work action is taken. The Ginna Station Quality Control 3 Engineer has authority to stop work on maintenance,     repair, inservice inspection, refueling, modification, testing or inspection deficiencies, at Ginna Station. The Ginna Station Quality Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.
IV-25           Revision 4 December 1978
 
The  Plant Operations Review Committee reviews all corrective action reports initiated at Ginna Station and recommends interim corrective action    if the action does not represent a change in configuration of the deficient item. The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating procedures.
Significant conditions adverse to quality identfied in General Maintenance are processed by the Quality Control 3( Coordinator. The General Maintenance Quality Control Coor-dinator has the authority to stop or limit work activities within his department.
Conditions adverse to quality which involve design defi-ciencies or, a recommended corrective action which involves a design change are reviewed by Ginna Station or Engineering as applicable. The cognizant oiganization determines the cause of the condition and recommends corrective action to preclude repetition.
Quality Assurance reviews all corrective action, reports to assure that the cause of the condition has been determined and that corrective action.has been taken to preclude repe-tition. Quality Assurance also reviews nonconformance report summaries for unsatisfactory trends and initiates a corrective action report    if such a trend occurs.
Completed corrective action reports are submitted to the
: 2. Vice President,  Electric and Steam Production to keep him aware of significant conditions adverse to quality.
IV.17 Qualit Assurance Records Quality Assurance is resonsible for establishing the basic requirements for quality assurance record retention and maintenance. The Ginna station Superintendent is responsible for the retention and maintenance of plant'records. Engineer-ing is responsible for the retention and maintenance of 4I    Engineering records. Quality Assurance, Purchasing, Fuel Planning, General Maintenance and Electric Meter and Labora-tory departments are responsible for assuring the maintenance and retention of records which they originate.
31 This may be accomplished either by retaining the records in their depart-ment or by forwarding them to Ginna Station or Engineering, as appropriate. Each organization retaining records is responsible for preparation, review, approval, and imple-mentation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements. The records which fall within quality assur-ance record requirements include those records required by Section 6.10 of the Technical Specifications and the quality assurance program. All records associated with the operation, maintenance, repair, inservice Revision  5 April  1979 IV-26
 
                          'I g
L ll I It I
e I
      ~I I        ~                  q 4
                                  'x .I    ft I
L I
' L      ~
t
    'L L'
                        ~
V  I    ~
gP


3(The Plant Operations Review Committee reviews all corrective action reports initiated at Ginna Station and recommends interim corrective action if the action does not represent a change in configuration of the deficient item.The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating procedures.
inspection, refueling, modification, inspection and testing of structures, systems, and components covered by the quality assurance program are included.
Significant conditions adverse to quality identfied in General Maintenance are processed by the Quality Control Coordinator.
Ginna Station records include operating logs; the results of inspections, tests, and the monitoring of plant activities; 4 3  drawings, procurement documents and material analyses; calibration procedures and reports; and nonconforming and corrective action reports. Records of the qualification of personnel, procedures, and equipment for special processes and the results of reviews are maintained by Engineering.
The General Maintenance Quality Control Coor-dinator has the authority to stop or limit work activities within his department.
Conditions adverse to quality which involve design defi-ciencies or, a recommended corrective action which involvesa design change are reviewed by Ginna Station or Engineering as applicable.
The cognizant oiganization determines the cause of the condition and recommends corrective action to preclude repetition.
Quality Assurance reviews all corrective action, reports to assure that the cause of the condition has been determined and that corrective action.has been taken to preclude repe-tition.Quality Assurance also reviews nonconformance report summaries for unsatisfactory trends and initiates a corrective action report if such a trend occurs.Completed corrective action reports are submitted to the 2.Vice President, Electric and Steam Production to keep him aware of significant conditions adverse to quality.IV.17 Qualit Assurance Records 4I 31 Quality Assurance is resonsible for establishing the basic requirements for quality assurance record retention and maintenance.
The Ginna station Superintendent is responsible for the retention and maintenance of plant'records.
Engineer-ing is responsible for the retention and maintenance of Engineering records.Quality Assurance, Purchasing, Fuel Planning, General Maintenance and Electric Meter and Labora-tory departments are responsible for assuring the maintenance and retention of records which they originate.
This may be accomplished either by retaining the records in their depart-ment or by forwarding them to Ginna Station or Engineering, as appropriate.
Each organization retaining records is responsible for preparation, review, approval, and imple-mentation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements.
The records which fall within quality assur-ance record requirements include those records required by Section 6.10 of the Technical Specifications and the quality assurance program.All records associated with the operation, maintenance, repair, inservice IV-26 Revision 5 April 1979
'I g L ll I It I e~I I~'x.I ft I q 4 I L I t'L~'L L'~V I~gP inspection, refueling, modification, inspection and testing of structures, systems, and components covered by the quality assurance program are included.4 3 Ginna Station records include operating logs;the results of inspections, tests, and the monitoring of plant activities; drawings, procurement documents and material analyses;calibration procedures and reports;and nonconforming and corrective action reports.Records of the qualification of personnel, procedures, and equipment for special processes and the results of reviews are maintained by Engineering.
Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
4l The requirements and responsibilities for record accessibility and transmittal are described in the Quality Assurance manual sections as appropriate.
4l The requirements and responsibilities for record accessibility and transmittal are described in the Quality Assurance manual sections as appropriate.     Requirements and responsi-bilities for   preparation, inspection, identification, review, storage, retrieval,   maintenance, and the retention of quality assurance records are in accordance with applicable quality assurance  record procedures, codes, standards, and procurement documents. Records are available to authorized personnel.
Requirements and responsi-bilities for preparation, inspection, identification, review, storage, retrieval, maintenance, and the retention of quality assurance records are in accordance with applicable qualityassurance record procedures, codes, standards, and procurement documents.
Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible record control activity.
Records are available to authorized personnel.
Records are either stored in record storage facilities which are designed to prevent destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept in two separate storage locations in separate buildings which are physically isolated from each other.
Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible record control activity.Records are either stored in record storage facilities which are designed to prevent destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept in two separate storage locations in separate buildings which are physically isolated from each other.Record keeping procedures provide for receiving, classifying, indexing, labeling, and preparing records for storage.The procedures establish retention requirements, accessibility, control of obsolete record destruction, and control for issuance and return of all records.The Ginna Station Superintendent is responsible for main-taining plant operating records as required in Section 6.10, Technical Specifications.
Record keeping procedures provide for receiving, classifying, indexing, labeling, and preparing records for storage. The procedures establish retention requirements, accessibility, control of obsolete record destruction, and control for issuance and return of all records.
Engineering is responsible for maintaining design records, such as specifications, drawings, design review reports, and design control documentation; quality assurance records, such as audit reports and supplier surveillance reports;purchasing records, such as supplier qualifications, bid evaluatons, and purchase orders.IV-27 Revision 4 December 1978  
The Ginna Station Superintendent is responsible for main-taining plant operating records as required in Section 6.10, Technical Specifications.
'
Engineering is responsible for maintaining design records, such as specifications, drawings, design review reports, and design control documentation; quality assurance records, such as audit reports and supplier surveillance reports; purchasing records, such as supplier qualifications, bid evaluatons, and purchase orders.
Ivsls Audits ,5 Compliance with all aspects of the quality assurance program and the effectiveness of the program is determined by audits of all organizations performing quality affecting activities.
IV-27             Revision 4 December 1978
Quality Assurance is responsible for conducting audits of each organization involved in the quality assurance program on a planned, periodic basis.Audit intervals are based on the status and safety important of activities being performed.
 
(Audits of Ginna Station, Engineering, General Maintenance,)Electric Meter and Laboratory and Purchasing organizations are performed annually.Table-IVe18-1 is a list of the activities to be audited in each of the organizations.
Ivsls Audits Compliance with all aspects of the quality assurance program and the effectiveness of the program is determined by audits of all organizations performing quality affecting activities.
Audit*frequencies are based on the level of activity in each area.Audit schedules are established to assure that each of the 4(activities are audited at the frequency specified in Technical Specifications 6.0 which includes annually for those activ-ities required to meet the criteria of Appendix B, 10CFR.Additional audits are conducted as required by special con-.ditions or circumstances.
Quality Assurance is responsible for conducting audits of each organization involved in the quality assurance program on a planned, periodic basis.       Audit intervals are based on the status and safety important of activities being performed.
Each audit requires the development of an audit plan to provide information about the audit, such as the functional areas to be audited, the names and assignments of those who will perform the audit, the scheduling arrangements, and the method of reporting findings and recommendations.
( Audits of Ginna Station, Engineering, General Maintenance,
The audits are performed in accordance with written procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.Audit results are documented and reported to the person having supervisory responsibility in the area audited, the Vice President, Electric and Steam Production, and the 2 Nuclear Safety Audit and Review Board.Within a specified period of time, the person having supervisory responsibility.in the area audited is required to review the audit results,.take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.2 Quality Assurance is responsible for developing audit plans'nd audit checklists, designating and training audit personnel, and conducting audits.Audits may be conducted by Quality Assurance engineers or other qualified personnel, such as technical specialists from other company departments and outside consultants.
        )Electric Meter and Laboratory       and Purchasing organizations are performed annually.     Table-IVe18-1     is a list of the activities to be   audited   in each of the organizations. Audit
Audits of major contractors, subcontractors, and suppliers are conducted during the early stages of design and procure-ment, as required, to evaluate their quality assurance program for compliance with all aspects of the procurement documents.
* frequencies are based   on the level   of activity   in each area.
Audits are conducted, as required, to assure that major contractors, subcontractors, and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents.
Audit schedules are   established     to assure   that each of the 4(activities are audited       at the frequency   specified   in Technical Specifications 6.0 which     includes   annually   for those activ-
During the project, Revision 5 April 1979 XV-28 I f I' additional audits are performed, as required, to assure all quality assurance program requirements are properly imple-mented in accordance with procurement documents.
  ,5 ities required to meet the     criteria   of Appendix   B, 10CFR.
2 Quality Assurance performs regular analyses of audit results to evaluate quality trends.Results of these analyses will be provided to management for their regular review.IV-29 Revision 4 December 1978  
Additional audits are conducted as required by special con-
'0 Table IV.l-l Quality Assurance Program Procedures Subject Listing Qualit Assurance Procedures Appendix B Criteria Indoctrination of Quality Assurance and Supervisory Personnel~'Training of Quality Assurance Personnel Management Review of the Quality Assurance Program Periodic Review of Quality Assurance Procedures Quality Assurance Group Organization and Responsibilities Quality Assurance Review of Rochester Gas and Electric Design Criteria Quality Assurance Review of Rochester Gas and Electric Engineering Specifications IIX Quality Assurance Review of Architect/Engineer's Design Documents XIX Requisitioning Quality Assurance Services IV Quality Assurance Review of Rochester Gas and Electric Procurement Documents IV Preparation, Review and Approval of Rochester Gas and Electric Q.A.Specifications Preparation, Review and Approval of Ginna Station Quality Assurance Manual IV Preparation, Review and Approval of Quality Assurance Procedures Review of Departmental Procedures VI Preparation, Review and Approval of Procedure Deviation Requests by Quality Assurance VI Qualification of Suppliers Supplier Surveillance VII VII IV-30 Revision" 4 December 1978  
      . ditions or circumstances.
,
Each audit requires the development of an audit plan to provide information about the audit, such as the functional areas to be audited, the names and assignments of those who will perform the audit, the scheduling         arrangements, and the method of reporting findings and       recommendations.       The audits are performed in accordance       with written   procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.
Table IV.l-l (cont'd)Qualit Assurance Procedures Appendix B Criteria Control of Supplier Performance Quality Assurance Bid Evaluations QA Review of Inservice Inspection
Audit results are documented and reported to the person having supervisory responsibility in the area audited, the Vice President, Electric and Steam Production, and the 2 Nuclear Safety Audit and Review Board.             Within a specified period of time, the person   having   supervisory   responsibility
.VII VII Preparation, Review and Processing of Corrective Action Reports by Quality Assurance XVI Qualification of Auditing Personnel Audit Scheduling and Planning Performance of Quality Assurance Audits Reporting and Follow-Up of Audit Findings Conduct of Quality Assurance During and in Follow-Up of USNRC and Management Audits XVIII XVIII XVIII XVIII XVIII IV-31 Revision 7 November 1980
          .in the area audited is required to review the audit results, .
take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.
2 'nd Quality Assurance is responsible for developing audit plans audit checklists, designating and training audit personnel, and conducting audits.
Audits may be conducted by Quality Assurance engineers or other qualified personnel, such as technical specialists from other company departments and outside consultants.
Audits of major contractors, subcontractors, and suppliers are conducted during the early stages of design and procure-ment, as required, to evaluate their quality assurance program for compliance with all aspects of the procurement documents. Audits are conducted, as required, to assure that major contractors, subcontractors, and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents.         During the project, Revision 5 XV-28           April  1979
 
I f
I'
 
additional audits are performed, as required, to assure all quality assurance program requirements are properly imple-mented in accordance with procurement documents.
Quality Assurance performs regular analyses of audit results 2
to evaluate quality trends. Results of these analyses will be provided to management for their regular review.
IV-29           Revision 4 December 1978
 
'0 Table IV.l-l Quality Assurance Program Procedures Subject Listing Appendix  B Qualit Assurance Procedures                                   Criteria Indoctrination of Quality Assurance           and Supervisory Personnel
          ~
of Quality Assurance Personnel
            'Training Management Review of the Quality Assurance Program Periodic Review of Quality Assurance Procedures Quality Assurance Group Organization and Responsibilities Quality Assurance Review of Rochester Gas and Electric Design         Criteria Quality Assurance Review of Rochester Gas and                       IIX Electric Engineering Specifications Quality Assurance Review of Architect/Engineer's                     XIX Design Documents Requisitioning Quality Assurance Services                             IV Quality Assurance Review of Rochester Gas           and               IV Electric Procurement         Documents Preparation,         Review and Approval of Rochester Gas           IV and Electric         Q.A. Specifications Preparation, Review and Approval of Ginna Station Quality Assurance Manual Preparation, Review and Approval of Quality Assurance Procedures Review of Departmental Procedures                                     VI Preparation, Review and Approval of Procedure                         VI Deviation Requests by Quality Assurance Qualification of Suppliers                                           VII Supplier Surveillance                                                 VII IV-30           Revision" 4 December 1978
 
Table IV. l-l (cont'd)
Appendix  B Qualit Assurance Procedures                       Criteria Control of Supplier Performance                           VII Quality Assurance Bid Evaluations                         VII QA Review of Inservice Inspection .
Preparation, Review and Processing of Corrective           XVI Action Reports by Quality Assurance Qualification of Auditing Personnel                       XVIII Audit Scheduling and Planning                           XVIII Performance of Quality Assurance Audits                   XVIII Reporting and Follow-Up of Audit Findings                 XVIII Conduct of Quality Assurance During   and in           XVIII Follow-Up of USNRC and Management   Audits Revision 7 November 1980 IV-31
 
Table  IV.l-l (cont'd)
Appendix  B Ginna Procedures                                      Criteria Ginna  Quality Assurance Program Implementation Training of Ginna Personnel Ginna Organization Work  Start Authorization Modification Control Activities Ginna Station Modification Evaluation Preparation, Review and Approval of Design Documents Preparation, Review and Approval of Minor Modification Safety Analysis Control of Procurement, Documents for Purchased                IV Materials, Parts, Components and Services Plant Procedures Plant Procedure  Document, Control                            VX Control of Engineering Documents                              VI Control of  NRC  Correspondence                                VI Receipt and Acceptance of Purchased Materials                VII Supplier Qualification Technical Evaluation                  VII Control of Purchased Services                                VII Control of Accepted Material, Parts and Components          VIII Identification and Marking of Material                      VIII Control of Welding                                            IX Welding Equipment Performance    Verification                  IX Nondestructive Examination Inspection and Surveillance Activities Revision  5 IV-32      April  1979
 
  ~ ~
a
 
Table  IV.l-l (cont'd)
Appendix 8 Ginna Procedures                                        Criteria Qualification of. Surveillance  and  Inspection Personnel Inservice Inspection                                        X, XIV Performance of Tests                                            XI Qualification of Test Personnel                                  XI Calibration and Control of Test Instruments                    XII Calibration and Control of Mechanical Measuring                XII Tools and Equipment Calibration  and Control of Process System                      XII Instrumentation Control of Material Handling and Handling Equipment            XIII Storage and Preservation of Materials                          XIII Station Holding Roles                                          XIV Test Status Control                                            XIV Control and Disposition of Nonconforming Materials              XV Issue of Nonconformance Reports                                  XV Corrective Action at Ginna Station                              XVI Control of Quality Assurance Records                          XVII Record Storage  Facility  and Equipment                        XVII System and Equipment  Histories                              XVII Ginna Station Response to Internal Audits                     XVIII Revision  5 IV-33        April  1979
 
            ~'
r
        'I f
ht H
 
Table IV.l-l (cont'd)
Appendix  B En  ineerin  Procedures                              Criteria Indoctrination  and Training                                  I n
Engineering Department Organization and                        IX Responsibilities Preparation, Review and Aprpoval of Design Input Documents Preparation, Review and Approval of Design Analyses Fngineering Drawings Preparation,  Review and Approval of Specifications Design  Verification                                          IIX Design  Interface Control                                    XII Preparation,  Review and Approval of Safety Analyses        XXI Review and  Approval of Architect Engineer or Consultant Design Documents                                  IIX Preparation, Review and Approval of Field Change Requests Purchase  Requisition                                        IV Engineering Procedures Engineering Procedure Deviation Request Distribution and Control of Documents by                        VI the Control Number Method Control of Documents by the List of                            VI Current Revisions Method Distribution and Control of Documents by Project              VI Correspondence  Procedures Receipt, Control and Distribution of Drawings and Aperature Cards                                                VI Supplier Evaluation                                          VII Revision  5 April  1979 IV-34
 
I 0
1
            'I k
(
k
  \
EI I'
j~
              ~
 
Table IV.l-l (cont'd)
Appendix  B En  ineerin  Procedures                              Criteria Preparation, Review and Approval of Bid Requests,          VII Bid Evaluations and Recommendations for Award Engineering Review of Nonconforming Materials, Parts        XV or Components 4
Initiating and Responding to Corrective Action Reports      XVI Records                                                    XVII Engineering Response to Audits                            XVIII Revision  5 April  1979 IV-35
 
pl Table  IV.l-l (cont'd)
Appendix  B Purchasin  Procedures                              Criteria Periodic Review of Purchasing Procedures Indoctrination and Training of Purchasing Personnel Purchasing Department Organization and Responsibilities Preparation,  Review, Approval and Issuance of              IV Purchase  Orders and Changes to Purchase Orders Requests  for Bids  and Bid  Evaluation                      IV Purchasing Procedures Purchasing Procedure De~iation Request Supplier Evaluation                                          VII Establishment and Maintenance of Qualified                  VII Suppliers List Supplier Nonconformance Processing                            XV Purchasing Department Response to Corrective                XVI Action Reports and Corrective Action Reporting Purchasing Records                                          XVII Purchasing Response  to Audits                            XVIII IV-36          Revision 4 December 1978


Table IV.l-l (cont'd)Ginna Procedures Appendix B Criteria Ginna Quality Assurance Program Implementation Training of Ginna Personnel Ginna Organization Work Start Authorization Modification Control Activities Ginna Station Modification Evaluation Preparation, Review and Approval of Design Documents Preparation, Review and Approval of Minor Modification Safety Analysis Control of Procurement, Documents for Purchased Materials, Parts, Components and Services IV Plant Procedures Plant Procedure Document, Control Control of Engineering Documents Control of NRC Correspondence Receipt and Acceptance of Purchased Materials Supplier Qualification Technical Evaluation Control of Purchased Services VX VI VI VII VII VII Control of Accepted Material, Parts and Components VIII Identification and Marking of Material Control of Welding Welding Equipment Performance Verification Nondestructive Examination Inspection and Surveillance Activities VIII IX IX IV-32 Revision 5 April 1979
~~a Table IV.l-l (cont'd)Ginna Procedures Appendix 8 Criteria Qualification of.Surveillance and Inspection Personnel Inservice Inspection X, XIV Performance of Tests XI Qualification of Test Personnel Calibration and Control of Test Instruments XI XII Calibration and Control of Mechanical Measuring Tools and Equipment XII Calibration and Control of Process System Instrumentation XII Control of Material Handling and Handling Equipment XIII Storage and Preservation of Materials Station Holding Roles XIII XIV Test Status Control Control and Disposition of Nonconforming Materials Issue of Nonconformance Reports Corrective Action at Ginna Station Control of Quality Assurance Records Record Storage Facility and Equipment System and Equipment Histories Ginna Station Response to Internal Audits XIV XV XV XVI XVII XVII XVII XVIII IV-33 Revision 5 April 1979
~'r'I ht f H Table IV.l-l (cont'd)En ineerin Procedures Appendix B Criteria Indoctrination and Training Engineering Department Organization and Responsibilities I n IX Preparation, Review and Aprpoval of Design Input Documents Preparation, Review and Approval of Design Analyses Fngineering Drawings Preparation, Review and Approval of Specifications Design Verification Design Interface Control Preparation, Review and Approval of Safety Analyses IIX XII XXI Review and Approval of Architect Engineer or Consultant Design Documents IIX Preparation, Review and Approval of Field Change Requests Purchase Requisition Engineering Procedures Engineering Procedure Deviation Request IV Distribution and Control of Documents by the Control Number Method VI Control of Documents by the List of Current Revisions Method VI Distribution and Control of Documents by Project Correspondence Procedures VI Receipt, Control and Distribution of Drawings and Aperature Cards Supplier Evaluation VI VII IV-34 Revision 5 April 1979 I 0 1'I k (k\EI I'j~'~
Table IV.l-l (cont'd)En ineerin Procedures Appendix B Criteria Preparation, Review and Approval of Bid Requests, Bid Evaluations and Recommendations for Award VII Engineering Review of Nonconforming Materials, Parts 4 or Components XV Initiating and Responding to Corrective Action Reports XVI Records Engineering Response to Audits XVII XVIII IV-35 Revision 5 April 1979 pl Table IV.l-l (cont'd)Purchasin Procedures Appendix B Criteria Periodic Review of Purchasing Procedures Indoctrination and Training of Purchasing Personnel Purchasing Department Organization and Responsibilities Preparation, Review, Approval and Issuance of Purchase Orders and Changes to Purchase Orders IV Requests for Bids and Bid Evaluation Purchasing Procedures Purchasing Procedure De~iation Request Supplier Evaluation IV VII Establishment and Maintenance of Qualified Suppliers List VII Supplier Nonconformance Processing XV Purchasing Department Response to Corrective Action Reports and Corrective Action Reporting XVI Purchasing Records Purchasing Response to Audits XVII XVIII IV-36 Revision 4 December 1978
\
\
Table IV.1-1 (cont'd)I General Maintenance Procedur'es Appendix B Criteria Indoctrination and Training General Maintenance Organization and Responsibilities Preparation, Review and Approval of Purchase Requisitions and Related Procurement Documents IV Quality Maintenance Procedures Quality Maintenance Procedure Deviation Request Preparation, Review and Approval of General Maintenance Fabrication Route Cards General Maintenance Instructions for Material Handling and Lifting Equipment Control and Distribution of Documents Regulating Safety Related Activities VI Receipt and Acceptance of Purchased Materials Control of Accepted Material, Parts and Components Traceability of Material VII VIII VIII Issue, Control and Storage of Weld Consumables 7 Welding Procedures 4>Welding Procedure Qualification Heat Treating Procedures 4 Welder Qualification and Currency~7 Inservice Inspection Control of Welding 4 Welding Equipment Performance Verification VIII IX IX IX IX IX IX Nondestructive Examination Procedures IX IV-37 Revision 7 November 1980  
Table IV. 1-1 (cont'd)
I                   Appendix  B General Maintenance Procedur'es                     Criteria Indoctrination and Training General Maintenance Organization and Responsibilities Preparation, Review and Approval of Purchase                 IV Requisitions and Related Procurement Documents Quality Maintenance Procedures Quality Maintenance Procedure Deviation Request Preparation, Review and Approval of General Maintenance Fabrication Route Cards General Maintenance Instructions for Material Handling and Lifting Equipment Control and Distribution of Documents Regulating             VI Safety Related Activities Receipt and Acceptance of Purchased Materials               VII Control of Accepted Material, Parts and Components         VIII Traceability of Material                                   VIII Issue, Control and Storage of Weld Consumables             VIII 7     Welding Procedures                                           IX 4> Welding Procedure   Qualification                           IX Heat Treating Procedures                                     IX 4 Welder Qualification and Currency
~
7 Inservice Inspection                                         IX Control of Welding                                           IX 4
Welding Equipment Performance   Verification                 IX Nondestructive Examination Procedures                       IX Revision 7 November 1980 IV-37
 
Table IV. l-l (cont'd)
Appendix  B General Maintenance Procedures I
Criteria 4 (
Nondestructive Examination Procedures Manual                    IX 7'ondestructive        Examination Personnel  Certifications          IX Inspection and  Surveillance Activities Qualification of Surveillance    and  Inspection Personnel Calibration  and  Control of Nondestructive                    XII Examination Instruments Inspection  and Maintenance  of Material Handling            XIII Equipment Overhead and Gantry Cranes Inspection and Maintenance of Portable    Lifting            XIII and Handling Equipment Underhung Cranes,  Jib Cranes  and Monorail Systems          XIII Slings and Related Apparatus                                  XIII Classification and Training of Material Handling              XIII Equipment Personnel Mobile Hydraulic Cranes                                        XIII Base Mounted Drum  Hoists                                    XIII Forklift Loading  Forks                                      XIII Control and Disposition of Nonconforming Material,              XV Parts and Components Corrective Action at General Maintenance                        XVI Quality Maintenance Records                                    XVII General Maintenance Response    to Internal Audits            XVIII Revision 7 November 1980 IV-38


Table IV.l-l (cont'd)I General Maintenance Procedures Appendix B Criteria 4 (Nondestructive Examination Procedures Manual 7'ondestructive Examination Personnel Certifications Inspection and Surveillance Activities IX IX Qualification of Surveillance and Inspection Personnel Calibration and Control of Nondestructive Examination Instruments XII Inspection and Maintenance of Material Handling Equipment XIII Overhead and Gantry Cranes Inspection and Maintenance of Portable Lifting and Handling Equipment XIII Underhung Cranes, Jib Cranes and Monorail Systems Slings and Related Apparatus XIII XIII Classification and Training of Material Handling Equipment Personnel XIII Mobile Hydraulic Cranes Base Mounted Drum Hoists Forklift Loading Forks Control and Disposition of Nonconforming Material, Parts and Components Corrective Action at General Maintenance Quality Maintenance Records General Maintenance Response to Internal Audits XIII XIII XIII XV XVI XVII XVIII IV-38 Revision 7 November 1980 0
0 Table IV.l-l (cont'd)
Table IV.l-l (cont'd)Electric Heter and Laborator Procedures Appendix 8 Criteria Quality Assurance Program Implementation for Electric Meter and Laboratory Department Training of Electric Meter and Laboratory Personnel Periodic Review of Quality Relay Procedures Electric Meter and Laboratory Organization Design/Modification Activities Control Control of Procurement Documents for Purchased Materials, Parts, Components and Services IV Preparation, Review, and Approval of Electric Meter and Laboratory Procedures V Control of Electric Meter and Laboratory Procedures Supplier Qualification Technical Evaluation Performance of Tests at Ginna Station VI VII XI Performance of Tests at Electric Meter and Laboratory Shop XI Documentation, Evaluation and Disposition of Test Results Xl Qualification of Test Personnel Calibration and Control of Test Instruments Control and Disposition of Nonconforming Materials Corrective Action at Electric Meter and Laboratory Control of Quality Assurance Records Response to Internal QA Audits XII XV XVI XVlI XV1II IV-39 Revision 4 December 1978 I
Appendix   8 Electric Heter and Laborator Procedures           Criteria Quality Assurance Program Implementation for Electric Meter and Laboratory Department Training of Electric Meter and Laboratory Personnel Periodic Review of Quality Relay Procedures Electric Meter and Laboratory Organization Design/Modification Activities Control Control of Procurement Documents for Purchased               IV Materials, Parts, Components and Services Preparation, Review, and Approval of Electric Meter           V and Laboratory Procedures Control of Electric Meter and Laboratory Procedures           VI Supplier Qualification Technical Evaluation                 VII Performance of Tests at Ginna Station                         XI Performance of Tests at Electric Meter and                   XI Laboratory Shop Documentation, Evaluation and Disposition of Test             Xl Results Qualification of Test Personnel Calibration and Control of Test Instruments                 XII Control and Disposition of Nonconforming Materials           XV Corrective Action at Electric Meter and Laboratory           XVI Control of Quality Assurance Records                       XVlI Response to Internal QA Audits                             XV1II IV-39           Revision 4 December 1978
TABLE IV.4-1 Procurement Document Re uirements Items to be considered for inclusion in procurement documents include: formed.*2.Technical Re uirements-by reference to specific drawings, specifications, codes, regulations, procedures or instruc-tions including revisions, therto that describe the items or services to be furnished.
Also identified shall be test, inspection and acceptance requirements, and any speci.al re-quirements for such activities as designing, identifi.cation, fabrication, cleaning, erecting, packaging, handling, shpping and extended storage.*3.Qualit Assurance Pro ram Re uirements-which require the supplier to have a documented quality assurance program that implements portions or all of lOCFR50 Appendix B as well as applicable quality assurance program requirements of other nationally recognized codes and standards.
Also included shall be the requirement that the supplier in-corporate appropriate quality assurance program require-ments in subtier procurement documents.
*4.Ri ht of Access-to include the facilities and records of the supplier for source inspection and audit by the Purchaser or parties designated by the purchaser.
Also included shall be provisions for the identification of witness and hold points and the minimum time of advance notice.*5.Documentation Re uirements-Submittal approval and retention requirements for documents such as quality assurance manuals, special process and test procedures, materials records, calcu-lations and analyses.*6.Nonconformances
-Requirements for reporting and disposition of nonconformances to procurement requirements.
*-Included in the review by Quality Assurance/Quality Control.IV-40 Revision 5 April 1979 J t 1 TABLE IV.18-1 Audit List Functional Or anization Engineering Activities Audited Indoctrination and Training Design Control Procurement Document Control Document Control Records Procurement Control Purchasing Indoctrination and Training Procurement Document Control Procurement Control Ginna Station QA Indoctrination and Training Ginna Staff Training, Retraining-Qualification and Performance Modification Maintenance and Repair Procurement Control Document Control and Records Inservice Inspection Surveillance Testing Handling, Storage and Shipping Facility Operation Conformance to all provisions contained in Technical Specifications and applicable license conditions Refueling Control of Measuring and Test Equipment Health Physics 6 Chemistry Security Plan'nd Procedures Emergency Plan and Procedures Inspection 6 Surveillance Fire Protection Corrective Action associated with deficiencies occurring in facility equipment, struc-tures, system or method of operation IV-41 Revision 4 December 1978 P il V TABLE IV.18-1 (cont'd.)Audit List Functional Or anization Activities Audited sl~)General Maintenance Indoctrination and Training Maintenance and Repair Procurement'ontrol Document Control Fabrication/
Inspection Control Control of Measuring and Test Equipment Special Processes Handling, Storage and Shipping E lectx ic Meter and Lab Indoctrination and Training Procurement Control Document Control Handling and Shipping Control of Measuring and Test Equipment Test Control IV-42 Revision 5 April 1979 A~~r 4 I R.E.GINNA NUCLEAR POWER PLANT MANAGEMENT ORGANIZATION CHART CHAIRMAN OF TMC ROAAD SVFCRVISIOH AHO ADMINISTRATION OTNCR FUNCTIONAL ACIATIOl SNIPS~AESPOHSISLt FOA FIRE PROTECTION
~ROC RAN PACSIDCNT H I SA, V,P.CCHtAAL StAVICES EXECVTIVC VlCC FACSIOCNT I I I I I I I I I I I I I I SR, V.F, FIHAHCC l AATCS CCMCAAL HAHACCR FURCHASIMC I I'USLIC AFFAIRS F VRCNAS INC AC CRT V.P, KLtCTRIC TRANSNISSION DtsTRISUTION l VTILIIAtION DIV SUPT~~ELECT, TRANS,~DIST,~I UTiL Sl'PT,, tLCCTRIC HETER l LAS V.P t LECT SIC SISTER FIAHNINC ANO OPt RATION DIV.SUPT, KLtCT SISTEN PLANN'INC I Ot'ERAT t ON ASSISTANT CHIIF tMCINtCA tNCINEERIFC CONSTAVCTION V.P, I CHIEF CACINtCR ASST CHIEF CNCINEER I I I I I I I I I I I I I I I I I I VICE FAESIDtNT ELECTRIC I SttAN F AOOVCTI ON~SUPCRINTEN DENT NUCLCAA~ADDUCTION SVPCRIHTKNDENt CIMMA STATIOH NSARS PORC I I L VICt FRKSIOCNT AAT Cs llANACFR OF SCCVRITT 0 0 3;N g H 8 0 O ELECTRIC HETER~tAR STAFF I L HAHACt RS DtSICN I CONSTR SVPtRIMTtNDCNT CKHCRAL MAINTENANCE HANACKR OVALttt ASSVRAHCC ASSISTANT SVF tRIHTENDCHT SUPERVISOR
~,HVC LtA R SLCVRttt ICN I CONSTR.CHC I Ntt 1$~tCO PD 5~DOCUMENT CONTROL.OAAFTIHC AHD TAAIHIHC CtNC AA I NAI~STAFF IV.2-1'NOVEHBER 1980 OVALITT FIANT OPERATIONS OUALI TT TRAININC I CINXA STATIC S t AFT ADVISORS OFCAHIIATION I.I I I I I L J 0
ROCHESTER GAS NG ELECTRIC (XYIPORATION GINCCA STATICII ORGA4IZATIOtt SUPERINTENDENT TRAINING COORD I tCATOR ASS I STANT SUPERINTENDENT I (iLYICP.ASSIS AMT fOA OPERATIOXAL ASS('SSMENc ENGINEERS SLPERVISO(CHEHIStAY hag HEALTH PHYSICS OPERA T I ONS Eh~v I NEER SRO F IRE fROTECTION HAINTENANCE AtO SAFETY COORDo ENGINEER OFFICE SLPERYI SOR TECHNICAL END ltiEER DUALITY COcctRCL ENGlt'EER QIEH I ST CtcEtc.I S TRY TECHIII Cl AHS HEALTH PHYSIC(STS RAD I AT ICCI PROTECTION TECHNICIANS SHIFT TECCttl CAI.ADY I SCR~I/SMIf T (PERAT IOtlS SUPERVISOR
~SRO S~IFT SUPERYISOR I/SH I FT SRO r HEAD (TINTROL OPERATOR I/SHIFT RO CONTROL (PERATOR I/SHIFT RO HATER I ALS COORD It(ATOR STOCKROOM Ph INTEt(ANCE SUPERV I SOR HA INTENANCf:
f OREHEN FITTERS KCHANI CS HANDYMEN laC SUPERVISOR IdC AND ELECTRIC fOREMEN TECHNICIANS a REPAIRMEN ELECTRICIAt5 NUCLEAR ENGINEER RESULTS d TEST SUPERV I SOR TECHNICIANS TECH4ICIANS REPORTING~cUc<ICAT ICcl f'ta EST BE Elti.ER SBO OR H'YE SS OEG"EE.stA Is AEGUIRED 04LY DURINT PcAER off tcATIDN.~oi (tt f AUXILIARY OPERATOR 2/SHIFT Figure IV.2-3 November 1.980 r 0 RXEESTER CAS f E EC.R C CO?i ORATIOS Gi&#xc3;EB.<YJiI:STEEP'iCE TA..c" G.".GA::IZATION CiiART I ay~QUI~i ITY COSTROL COORS GATOR ASSI:'.TA::T SUPE VISOR c esOgS SUP.VISOR FIELD SERVICES SUPERVISOR iUILDIXG HAIR EY.ANCE SUPERVISOR
: INSPECTION
.SUPERVISOR l%~IALS I ENQ~~Q.Re pm 8 Ul.D'p.Qp t ,LD CQ C>Figure lV.2-4 November l980 4 V Rochester Gas and Electric Corporation Engineering Department Organisation Vice President and Chief Engineer Assistant Chief Engineer-Engineering and Construction As~istant Chief Engineer Administration, Maintenance, Quality Assurance, Drafting, Environmental Construction Engineering Mechanical Engineering Nuclear Engineering Electrical Engineering Structural Engineering'eneral Maintenance Drafting Quality Assurance Records Figure IV.2-5 November 1980 I't~1;rJ Rochester Gas and Electric'orporation Ginna Station Review and Audits Functions NSARB H I QA PORC Electric Meter and Lab Purchasing General Maintenance Engineering Plant UA IO 8 h<9 IO O'~S 0 Review----Audit Figure IV.2-6%?ebruary 1, 1976 e P
&-~4%Guv&>5~~~+~M Cpm~onymy~),",'P~GL.Introduction'a chal i+~ll-l->4 1-l5-7-P up~In a May 28, 1974 letter from Mr.Robert A.Purple, the United States Atomic Energy Commission asked several questions on the R.E.Ginna Quality Assurance Program for Station Operation.
The information requested and further clarification of'he program are provided in Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License.Supplement IV is a revised description of the R.E.Ginna Quality Assurance Program for Station Operation and supersedes Supplement II in its entirety.The following revisions have been made to the description of the program: Section IV.2 Additions That all Quality Assurance, Quality Control, Engin-eering, and Purchasing procedures are reviewed for adequacy at least once every two years.That the list of structures, systems, and components covered by the quality assurance program are based on the list in Section 1.2.1 of the FSAR.That management review of the quality assurance program may be in a form other than an audit.That the Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years.That the Chairman of the Nuclear Safety Audit and Review Board reports to the Chairman of the Board of Rochester Gas and Electric Corporation on NSARB activities.
Section IV.3 Additions That spare or replacement parts meet, at least, the requirements of the original design.IV-i Revision 1 August 1974


That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.
I TABLE IV. 4-1 Procurement Document Re uirements Items to be considered    for inclusion in procurement documents include:
That design deficiencies are documented and controlled in accordance with Section IV.16.That, design documents are collected, stored, and main-tained in accordance with Section II.17 and a listing of which design documents are maintained.
formed.
Clarification Clarified which design documents are reviewed by Quality Assurance.
*2. Technical  Re uirements  by reference to specific drawings, specifications, codes, regulations, procedures or instruc-tions including revisions, therto that describe the items or services to be furnished. Also identified shall be test, inspection and acceptance requirements, and any speci.al re-quirements for such activities as designing, identifi.cation, fabrication, cleaning, erecting, packaging, handling, shpping and extended  storage.
Section IV.4 Additions That procurement documents for spare or replacement parts are processed in the same manner as other procurement documents.
*3. Qualit Assurance Pro ram Re uirements  which require the supplier to have a documented quality assurance program that implements portions or all of 10CFR50 Appendix B as well as applicable quality assurance program requirements of other nationally recognized codes and standards. Also included shall be the requirement that the supplier in-corporate appropriate quality assurance program require-ments in subtier procurement documents.
That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.That the documents are available for verification in Purchasing and plant records.That Quality Control reviews procurement documents for spare and replacement parts for similarity to the original requirements, and adequacy of quality require-ments.Section IV.5 Clarification Clarifies which documents are reviewed by Quality Assurance.
*4. Ri ht of Access    to include the facilities and records of the supplier for source inspection and audit by the Purchaser or parties designated by the purchaser. Also included shall be provisions for the identification of witness and hold points and the minimum time of advance notice.
Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.IV-ii Revision 1 August 1974 t It That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.
*5. Documentation Re uirements  Submittal approval and retention requirements for documents such as quality assurance manuals, special process and test procedures, materials records, calcu-lations  and analyses.
Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.Added Quality Control responsibilities for sur-veillance and inspection of special process activi-'ies.
*6. Nonconformances  Requirements for reporting and      disposition of nonconformances to procurement requirements.
Section IV.10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of the activity.That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification of the organization responsible for performing the inspection, the a'cceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.That inspection equipment.
* Included in the review by Quality Assurance/Quality Control.
is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.Section IV.11 Addition That test procedures include test methods and test instrumentation definition.
Revision  5 April  1979 IV-40
IV-iii Revision 1 August 1974 I
 
Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.
J t
Section IV.14 Addition That written procedures control the use of hold tags, test.tags and labels and that the procedures require the recording of the name of the person placing and removing the tag.Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.Section IV.17 Additions That plant records include operating logs, specifications, calibration procedures and nonconformance reports, and the results of tions, tests, audits and the monitoring of activities and material analyses.drawings, reports, inspec-plant That quality assurance records of special process activities are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.
1
 
TABLE IV.18-1 Audit List Functional Or anization            Activities Audited Engineering                  Indoctrination    and  Training Design Control Procurement    Document    Control Document  Control Records Procurement Control Purchasing                    Indoctrination    and  Training Procurement    Document    Control Procurement Control Ginna Station                QA  Indoctrination and Training Ginna  Staff Training, Retraining-Qualification and Performance Modification Maintenance and Repair Procurement Control Document    Control and    Records Inservice Inspection Surveillance Testing Handling, Storage and Shipping Facility Operation Conformance to all provisions contained in Technical Specifications and applicable license conditions Refueling Control of Measuring and Test Equipment Health    Physics    6  Chemistry Security Plan'nd Procedures Emergency Plan and Procedures Inspection 6 Surveillance Fire Protection Corrective Action associated with deficiencies occurring in facility equipment, struc-tures, system or method of operation IV-41              Revision  4 December  1978
 
P il V
 
TABLE IV.18-1 (cont'd.)
Audit List Functional Or anization              Activities Audited General Maintenance              Indoctrination and Training Maintenance and Repair Procurement'ontrol Document Control sl ~)                                  Fabrication/ Inspection Control Control of Measuring and Test Equipment Special Processes Handling, Storage and Shipping E lectx ic Meter and Lab        Indoctrination  and Training Procurement Control Document  Control Handling and Shipping Control of Measuring and Test Equipment Test Control IV-42        Revision  5 April  1979
 
A ~  ~
r 4
I
 
R.E. GINNA NUCLEAR POWER PLANT MANAGEMENT ORGANIZATION CHART CHAIRMAN OF TMC ROAAD SVFCRVISIOH AHO ADMINISTRATION OTNCR FUNCTIONAL ACIATIOlSNIPS
            ~  AESPOHSISLt FOA FIRE PROTECTION
              ~ ROC RAN PACSIDCNT EXECVTIVC VlCC FACSIOCNT I
I I
SA, V,P.                                                                                                                                                                        I                  SR,  V.F, CCHtAAL StAVICES                                                                                                                                                                      I            FIHAHCC    l AATCS I
I I
I I
I I
H                                                                                                                                                                                        I I
I V.P, KLtCTRIC TRANSNISSION V. P  t LECT SIC                                          V.P, I CHIEF                                VICE FAESIDtNT                              VICt  FRKSIOCNT DtsTRISUTION    l  SISTER FIAHNINC                                                CACINtCR                                ELECTRIC  I  SttAN          NSARS AATCs ANO OPt RATION                                                                                          F AOOVCTION    ~
VTILIIAtION                                                                                                      I I
I I
I      SUPCRINTEN DENT CCMCAAL HAHACCR              DIV SUPT ~ ~  DIV. SUPT, KLtCT I                                                                                                                              I FURCHASIMC              ELECT, TRANS, ~  SISTEN PLANN'INC    I                                                                                          NUCLCAA I'USLIC AFFAIRS          DIST, ~  I  UTiL      Ot'ERAT t ON                                                                                  I        ~ ADDUCTION I
I I
I I
ASSISTANT CHIIF                                                            I Sl'PT,, tLCCTRIC                            tMCINtCA                                            ASST CHIEF          I    SVPCRIHTKNDENt                                  llANACFR OF F VRCNAS INC                                                                                                                                                                    PORC AC CRT                HETER  l LAS                          tNCINEERIFC                                            CNCINEER          I    CIMMA STATIOH                                    SCCVRITT CONSTAVCTION                                                                                              I I                              I L
I I
SVPtRIMTtNDCNT  HANACKR                                                    SUPERVISOR HAHACtRS                                                                          ASSISTANT DtSICN  I CONSTR CKHCRAL    OVALttt    SVF tRIHTENDCHT                                ~,HVC LtAR MAINTENANCE  ASSVRAHCC                                                      SLCVRttt 00 3; N g 0H 8
ELECTRIC HETER
                                  ~ tAR STAFF I
ICN CHC I I CONSTR.
Ntt1$
                                                                                              ~ tCO PD 5 ~ DOCUMENT CONTROL. OAAFTIHC AHD TAAIHIHC NAI~
CtNC AAI STAFF I
OUALITT
                                                                                                                                                . I OVALITT I
FIANT OPERATIONS S tAFT I
TRAININC ADVISORS I  CINXA STATIC OFCAHIIATION I
L                                                                                                  I                                    L                              J O                                                                                                    IV. 2-1
                                                                                            'NOVEHBER 1980
 
0 ROCHESTER GAS    NG ELECTRIC (XYIPORATION GINCCA STATICII ORGA4IZATIOtt SUPERINTENDENT TRAINING COORD I tCATOR ASS I STANT SUPERINTENDENT I (iLYICP. ASSIS AMT fOA OPERATIOXAL                          ENGINEERS ASS('SSMENc SLPERVISO(                                    OPERA T I ONS            F IRE fROTECTION          HAINTENANCE              OFFICE                TECHNICAL                DUALITY COcctRCL CHEHIStAY hag                                    Eh~v I NEER            AtO SAFETY    COORDo        ENGINEER              SLPERYI SOR              END ltiEER                  ENGlt'EER HEALTH PHYSICS                                                SRO HEALTH                            (PERAT IOtlS QIEH I ST                      PHYSIC( STS                        SUPERVISOR    ~          HATER I ALS              Ph INTEt(ANCE        laC                NUCLEAR            RESULTS d TEST SRO        COORD It(ATOR            SUPERV I SOR      SUPERVISOR            ENGINEER              SUPERV I SOR        TECH4ICIANS CtcEtc. I S TRY                RAD I AT ICCI                  S~IFT SUPERYISOR TECHIIICl AHS                  PROTECTION                            I/SH I FT              STOCKROOM                HAINTENANCf:        IdC AND TECHNICIANS                                        SRO                                    f OREHEN        ELECTRIC TECHNICIANS fOREMEN r      HEAD (TINTROL OPERATOR I/SHIFT                                        FITTERS      TECHNICIANS a RO                                  KCHANICS          REPAIRMEN HANDYMEN        ELECTRICIAt5 CONTROL (PERATOR SHIFT TECCttl CAI.              I/SHIFT ADY I SCR ~                            RO I/SMIfT AUXILIARY OPERATOR 2/SHIFT REPORTING f      'ta  EST stA Is
                                ~cUc<ICAT ICcl BE Elti.ER SBO OR H'YE SS OEG"EE.
AEGUIRED 04LY DURINT PcAER      off tcATIDN.
~
oi (tt f Figure IV.2-3 November 1.980
 
r 0 RXEESTER CAS f      E  EC. R    C  CO?i ORATIOS Gi&#xc3;EB.< YJiI:STEEP'iCE    TA.. c" G.".GA::IZATION CiiART Iay    ~
QUI~i ITY COSTROL COORS GATOR ASSI:'.TA::T SUPE VISOR    SUP . VISOR                          SUPERVISOR                                . SUPERVISOR iUILDIXG                      SUPERVISOR c esOgS  FIELD SERVICES                                                      : INSPECTION  l%~IALS HAIR EY.ANCE                              I ENQ~~Q
  .Re pm 8 Ul
. D'p.
Qp Figure lV.2-4 t                        November l980
  ,LD CQ C>
 
4 V
 
Rochester Gas and Electric Corporation Engineering Department Organisation Vice President and Chief Engineer As ~ istant Chief Engineer Assistant Chief Engineer-                                                        Administration, Maintenance, Engineering and Construction                                                    Quality Assurance, Drafting, Environmental Construction                      Nuclear                                  Structural Engineering Mechanical Engineering          Engineering Electrical Engineering Engineering'eneralMaintenance Drafting              Quality Assurance Records Figure IV.2-5 November 1980
 
I' t
        ~
  ;r 1
J
 
Rochester  Gas  and  Electric'orporation Ginna    Station Review and    Audits Functions NSARB H                                                        QA                              PORC I
Electric Meter        Purchasing General              Engineering Plant and Lab                                    Maintenance UA IO 8 h <
9 O'
IO
      ~
S 0 Review Audit Figure IV. 2-6
                                                % ?ebruary 1, 1976
 
e P
 
chal
  &-~4%
Guv&>
5~~~ +~M Cpm
    ~onymy GL.
                      ~),",'P~
Introduction'a i+~          ll-l->4 1-l5-7-P    up~
In a May 28, 1974 letter from Mr. Robert A. Purple, the United States Atomic Energy Commission asked several questions on the R. E. Ginna Quality Assurance Program for Station Operation. The information requested and further clarification of'he program are provided in Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. Supplement IV is a revised description of the R. E. Ginna Quality Assurance Program for Station Operation and supersedes Supplement  II  in its entirety. The following revisions have been made to the description of the program:
Section IV.2 Additions That  all  Quality Assurance, Quality Control, Engin-eering,  and Purchasing procedures are reviewed  for adequacy at least once every two years.
That the list of structures, systems, and components covered by the quality assurance program are based on the list in Section 1.2.1 of the FSAR.
That management review of the quality assurance    program may be  in a form other than an audit.
That the Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years.
That the Chairman of the Nuclear Safety Audit and Review Board reports to the Chairman of the Board of Rochester Gas and Electric Corporation on NSARB activities.
Section IV.3 Additions That spare or replacement parts meet, at least, the requirements of the original design.
IV-i                Revision  1 August 1974
 
That  for plant modification, the design engineer selects and reviews materials, parts,   and equipment for suitability of application.
That design deficiencies are documented and controlled in accordance with Section IV.16.
That, design documents   are collected, stored,   and main-tained in accordance with Section II.17 and     a listing of which design documents are maintained.
Clarification Clarified which design   documents are reviewed by Quality Assurance.
Section IV.4 Additions That procurement documents     for spare or replacement parts are processed in the     same manner as other procurement documents.
That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.
That the documents are available     for verification in Purchasing and plant records.
That Quality Control reviews procurement documents for spare and replacement parts for similarity to the original requirements, and adequacy of quality require-ments.
Section IV.5 Clarification Clarifies which   documents are reviewed by Quality Assurance.
Section IV.6 Addition Made   procurement document review requirements consistent with Section IV.4.
IV-ii                 Revision 1 August 1974
 
t It
 
That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.
Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.
Added Quality Control responsibilities for sur-veillance and inspection of special process   activi-'ies.
Section IV.10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of the activity.
That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification of the organization responsible for performing the inspection, the a'cceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.
That inspection equipment. is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.
Section IV.11 Addition That   test procedures include test methods and           test instrumentation definition.
IV-iii             Revision             1 August 1974
 
I Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.
Section IV.14 Addition That written procedures control the use of hold tags, test. tags and labels and that the procedures require the recording of the name of the person placing and removing the tag.
Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.
Section IV.17 Additions That plant records include operating logs,  drawings, specifications, calibration procedures and   reports, nonconformance reports, and the results of   inspec-tions, tests, audits and the monitoring of   plant activities and material analyses.
That quality assurance records of special process activities   are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.
That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
IV-iv Revision 1 August, 1974  
IV-iv             Revision 1 August, 1974
 
Section IV.18 Addition That Quality Assurance is responsible for conducting the audits listed in Table IV.18-1.
In July 1974, the United, States Atomic Energy Commission requested information on the conformance of the R. E. Ginna Quality Assurance Program for Station Operation to the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book  Revision 0) . The infor-mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. The following changes have been made  to Supplement IV:
Section  IV.l Additions A description of the extent to which the quality assurance program conforms to the document entitled "Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants",
Revision 0 dated October 1973 (Orange Book  Revision 0).
Revision  1 August 1974
 
l I
    'I
 
TABLE OF CONTENTS Section              Title                              Pa<ac QUALITY ASSURANCE PROGRAM FOR STATION OPERATION IV.1    Quality Assurance Program                      IV-1 IV.2    Organization                                    IV-5 IV.3    Design Control                                  IV-12 IV.4    Procurement Document Control                    IV-16 IV.5    Instructions, Procedures,    and Drawings      IV-18 IV.6    Document  Control                              IV-21 IV.7    Control of Purchased Material, Equipment        IV-23 and Services IV.8    Identification  and Control of Materials,      IV-28 Parts, and Components IV.9    Control of Special Processes                    IV-30 IV.10    Inspection                                      IV-31 IV.11    Test Control                                    IV-34 IV.12    Control of Measuring and Test Equipment.        IV-35 IV.13    Handling, Storage, and Shipping                IV-37 IV.14    Inspection, Test, and Operating Status          IV-39 IV.15    Nonconforming Materials, Parts, and            IV-41 Components IV.16    Corrective Action                              IV-42 IV.17    Quality Assurance Records                      IV-45 IV.18    Audits                                          IV-47 IV-vi                Revision  1 August 1974
 
1 LIST  OF TABLES Table Number            Title                              Pa<ac IV.l-l            Quality Assurance Program                IV-51 Procedures  Subject Listing IV.4-1            Procurement Document Requirements        IV-77 IV.18-1            Audit List                              IV-78*
LIST  OF FIGURES Fi ure Number            Title                            Pacae IV.2-1            Management  Organization                IV-79*
IV.2-2            Quality Assurance Organization          IV-80 IV.2-3            Ginna Station Organization              IV-81*
IV.2-4            Quality Control Organization            IV-82 IV.2-5            Engineering Department. Organization    IV-83 IV.2-6            Review and Audit Functions              IV-84*
* Table IV.18-1, Figure IV.2-1 and Figure IV.2-3 Have been  revised. Figure IV.2-6 has been added.
IV-vii            Revision 1 August 1974
 
I I QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro      ram The  quality  assurance  program described in this Supplement has been developed by the Rochester Gas and Electric Corpora-tion to assure safe and reliable operation of the R.E. Ginna Nuclear Power Plant.      This program applies to all activities affecting the safety related functions of the structures, systems, and components that prevent or mitigate the con-sequences  of postulated accidents that could cause undue
, risk to the health and safety of the public. These quality affecting activities include operating, maintaining, repair-ing, refueling, and modifying.
The  basic Rochester  Gas and  Electric Corporation quality assurance  policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate State-ment of Quality Assurance Policy. This policy is imple-mented by the Senior Vice President, Electric and Steam through the Quality Assurance Coordinator and the Ginna Station Superintendent.
The program  is  governed by a Ginna Station Quality Assurance Manual which contains the requirements      and assignment of    responsibilities for implementation of the program. The  manual is developed and maintained by the Quality Assurance Coordinator and reviewed    and approved
                      >>I by the Senior Vice President, Electric and    Steam.
 
The program    is  implemented through Quality Assurance, Quality Control, Engineering,      and Purchasing    Pro-cedures.    .These  procedures are developed by the responsible organization (i.e., Quality Assurance, Operations, Engineer-ing, and Purchasing) and reviewed and approved by the Quality Assurance Coordinator.      The procedures  are contained  in separate manuals maintained by the responsible organization.
All these procedures are reviewed for adequacy at least once every two years by the responsible organization. Table IV.
1-.1 provides a listing of the subjects and a short descrip-tion of the subject matter which is contained in the pro-cedures.
Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual. Organizational responsibilities are described in Section IV.2.
The  quality    assurance  program covers  all existing  Seismic Category  I  structures, systems,    and components,    including their foundations    and supports. Activities, affecting the quality of these structures,      systems,  and components are controlled to an extent consistent with        their  importance to safety. A  detailed listing of the structures, systems, IV-2
 
I and components  covered  by'he quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assurance Manual.
Details of the system boundaries and the quality classifica-I tion of water-and-steam-containing components are contained on system flow drawings. The listing of structures, systemsi and components  covered by the  quality  assurance  program D
and the system  flow drawings are prepared and maintained by Engineering t and reviewed and approved by Quality Assurance.
Modifications or additions to existing structures, systems, and components  are designated the    same  seismic  classifica-tion  as the existing system. New  structures, systems, and components  are designated  a  seismic classification in accordance with the guidelines      in USAEC  Regulatory Guide 1.29.
Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced. Personnel responsible    for performing activities affecting quality    are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures. Refresher sessions XV-3
 
0 are held  periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure. Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.
Quality Assurance assists in establishing training re-quirements and assures that personnel are trained by auditing training records.
In addition to training in quality assurance, each department conducts on-the-job training to assure that personnel are  qualified for their primary    work assignments.
The Ginna  Station Superintendent is responsible for the formal training, qualification, licensing, and requali-I fication of operators,    as necessary. Where  necessary, personnel are trained in radiation protection, plant safety  and  security.
The  Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program  at least  once every two years    to assure that    it is meaningful and is effectively complying with corporate policy and 10CFR50, Appendix B. 'his review consists of audits or a review equivalent to an audit performed by company personnel or outside consultants.      Reviews will be conducted every six months during the first two years, that the program  is  implemented.
IV-4
 
The  quality assurance      program is designed to,meet the requirements of      Title  10  of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants." The program con-forms to the following AEC Regulatory Guides and ANSI Standards:
: a. AEC  Regulatory Guide 1.8, "Personnel Selection and Training", and. regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book  Revision 0)
: b. AEC  Regulatory Guide 1.28, "Quality Assurance Program Requirements (Design and Construction)",
and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book  Revision 1)
Note: The requirements and guidelines contained in ANSI N45.2 and associated standards are applied only to Seismic Category I structures, systems, and components, including their foundations and supports.
: c. AEC Regulatory Guide 1.30, "Quality Assurance Requirements for the Installation, Inspection, and Testing of Instrumentation and Electric Equipment"
: d. AEC  Regulatory Guide 1.33, "Quality Assurance Program Requirements (Operation) ", and regula-tory staff    comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants",
Revision 0 dated October 1973 (Orange Book Revision 0)
IV-4A              Revision 1974 1'ugust.


Section IV.18 Addition That Quality Assurance is responsible for conducting the audits listed in Table IV.18-1.In July 1974, the United, States Atomic Energy Commission requested information on the conformance of the R.E.Ginna Quality Assurance Program for Station Operation to the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0).The infor-mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License.The following changes have been made to Supplement IV: Section IV.l Additions A description of the extent to which the quality assurance program conforms to the document entitled"Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0).Revision 1 August 1974 l I'I TABLE OF CONTENTS Section Title Pa<ac QUALITY ASSURANCE PROGRAM FOR STATION OPERATION IV.1 IV.2 IV.3 IV.4 IV.5 IV.6 IV.7 IV.8 IV.9 IV.10 IV.11 IV.12 IV.13 IV.14 IV.15 IV.16 IV.17 IV.18 Quality Assurance Program Organization Design Control Procurement Document Control Instructions, Procedures, and Drawings Document Control Control of Purchased Material, Equipment and Services Identification and Control of Materials, Parts, and Components Control of Special Processes Inspection Test Control Control of Measuring and Test Equipment.
  ~ ~
Handling, Storage, and Shipping Inspection, Test, and Operating Status Nonconforming Materials, Parts, and Components Corrective Action Quality Assurance Records Audits IV-1 IV-5 IV-12 IV-16 IV-18 IV-21 IV-23 IV-28 IV-30 IV-31 IV-34 IV-35 IV-37 IV-39 IV-41 IV-42 IV-45 IV-47 IV-vi Revision 1 August 1974 1
l l
LIST OF TABLES Table Number IV.l-l IV.4-1 IV.18-1 Title Quality Assurance Program Procedures Subject Listing Procurement Document Requirements Audit List Pa<ac IV-51 IV-77 IV-78*LIST OF FIGURES Fi ure Number IV.2-1 IV.2-2 IV.2-3 IV.2-4 IV.2-5 IV.2-6 Title Management Organization Quality Assurance Organization Ginna Station Organization Quality Control Organization Engineering Department.
: e. AEC  Regulatory Guide 1.37, "Quality Assurance Requirements    for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power    Plants"
Organization Review and Audit Functions Pacae IV-79*IV-80 IV-81*IV-82 IV-83 IV-84**Table IV.18-1, Figure IV.2-1 and Figure IV.2-3 Have been revised.Figure IV.2-6 has been added.IV-vii Revision 1 August 1974 I I QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Corpora-tion to assure safe and reliable operation of the R.E.Ginna Nuclear Power Plant.This program applies to all activities affecting the safety related functions of the structures, systems, and components that prevent or mitigate the con-sequences of postulated accidents that could cause undue , risk to the health and safety of the public.These quality affecting activities include operating, maintaining, repair-ing, refueling, and modifying.
: f. AEC  Regulatory Guide 1.38, "Quality Assurance Requirements    for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants"
The basic Rochester Gas and Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate State-ment of Quality Assurance Policy.This policy is imple-mented by the Senior Vice President, Electric and Steam through the Quality Assurance Coordinator and the Ginna Station Superintendent.
: g. AEC  Regulatory Guide 1.39, "Housekeeping Require-ments    for Water-Cooled Nuclear Power Plants"
The program is governed by a Ginna Station Quality Assurance Manual which contains the requirements and assignment of responsibilities for implementation of the program.The manual is developed and maintained by the Quality Assurance Coordinator and reviewed and approved>>I by the Senior Vice President, Electric and Steam.
: h. AEC Regulatory Guide 1.58, "Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel"
: i. AEC  Regulatory Guide 1.64, "Quality Assurance Requirements      for the Design of Nuclear Power Plants" j.
C AEC  Regulatory Guide 1.74, "Quality Assurance Terms and    Definitions"
: k. Extracts from ANSI N45.2.8, "Supplementary Quality Assurance Requirements for Installation, Inspec-tion, and Testing of Mechanical Equipment and Systems for the Construction'Phase of Nuclear Power Plants", contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book Revision 0)
: 1. ANSI N45.2.9, "Requirements for Collection, Storage, and Maintenance of Quality Assurance Records for Nuclear Power Plants" Note:    When  record storage  facilities are not designed  in accordance with the require-ments of ANSI 45.2.9, duplicate records are kept in two separate storage locations in separate buildings which axe physically isolated from each other.
: m. ANSI N45.2.12, "Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants""
IV-4B            Revision 1 August 1974


The program is implemented through Quality Assurance, Quality Control, Engineering, and Purchasing Pro-cedures..These procedures are developed by the responsible organization (i.e., Quality Assurance, Operations, Engineer-ing, and Purchasing) and reviewed and approved by the Quality Assurance Coordinator.
~ I
The procedures are contained in separate manuals maintained by the responsible organization.
: n. ANSI N45.2.13, "Quality Assurance Requirements for Control of Procurement of Equipment, Materials and Services for Nuclear Power Plants," and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book Revision 1)
All these procedures are reviewed for adequacy at least once every two years by the responsible organization.
IV-4C            Revision 1 August 1974
Table IV.1-.1 provides a listing of the subjects and a short descrip-tion of the subject matter which is contained in the pro-cedures.Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual.Organizational responsibilities are described in Section IV.2.The quality assurance program covers all existing Seismic Category I structures, systems, and components, including their foundations and supports.Activities, affecting the quality of these structures, systems, and components are controlled to an extent consistent with their importance to safety.A detailed listing of the structures, systems, IV-2 I
and components covered by'he quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assurance Manual.I Details of the system boundaries and the quality classifica-tion of water-and-steam-containing components are contained on system flow drawings.The listing of structures, systemsi and components covered by the quality assurance program D and the system flow drawings are prepared and maintained by Engineering and reviewed and approved by Quality Assurance.
t Modifications or additions to existing structures, systems, and components are designated the same seismic classifica-tion as the existing system.New structures, systems, and components are designated a seismic classification in accordance with the guidelines in USAEC Regulatory Guide 1.29.Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced.Personnel responsible for performing activities affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures.
Refresher sessions XV-3 0
are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure.
Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.Quality Assurance assists in establishing training re-quirements and assures that personnel are trained by auditing training records.In addition to training in quality assurance, each department conducts on-the-job training to assure that personnel are qualified for their primary work assignments.
The Ginna Station Superintendent is responsible for the formal training, qualification, licensing, and requali-I fication of operators, as necessary.
Where necessary, personnel are trained in radiation protection, plant safety and security.The Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that it is meaningful and is effectively complying with corporate policy and lOCFR50, Appendix B.'his review consists of audits or a review equivalent to an audit performed by company personnel or outside consultants.
Reviews will be conducted every six months during the first two years, that the program is implemented.
IV-4


The quality assurance program is designed to,meet the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants." The program con-forms to the following AEC Regulatory Guides and ANSI Standards:
        ~ '
a.AEC Regulatory Guide 1.8,"Personnel Selection and Training", and.regulatory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0)b.AEC Regulatory Guide 1.28,"Quality Assurance Program Requirements (Design and Construction)", and regulatory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book-Revision 1)Note: The requirements and guidelines contained in ANSI N45.2 and associated standards are applied only to Seismic Category I structures, systems, and components, including their foundations and supports.c.AEC Regulatory Guide 1.30,"Quality Assurance Requirements for the Installation, Inspection, and Testing of Instrumentation and Electric Equipment" d.AEC Regulatory Guide 1.33,"Quality Assurance Program Requirements (Operation)
l, s~
", and regula-tory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0)IV-4A Revision 1'ugust.1974
Q
~~l l e.AEC Regulatory Guide 1.37,"Quality Assurance Requirements for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants" f.AEC Regulatory Guide 1.38,"Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants" g.AEC Regulatory Guide 1.39,"Housekeeping Require-ments for Water-Cooled Nuclear Power Plants" h.AEC Regulatory Guide 1.58,"Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel" i.AEC Regulatory Guide 1.64,"Quality Assurance Requirements for the Design of Nuclear Power Plants" C j.AEC Regulatory Guide 1.74,"Quality Assurance Terms and Definitions" k.Extracts from ANSI N45.2.8,"Supplementary Quality Assurance Requirements for Installation, Inspec-tion, and Testing of Mechanical Equipment and Systems for the Construction'Phase of Nuclear Power Plants", contained in the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0)1.ANSI N45.2.9,"Requirements for Collection, Storage, and Maintenance of Quality Assurance Records for Nuclear Power Plants" Note: When record storage facilities are not designed in accordance with the require-ments of ANSI 45.2.9, duplicate records are kept in two separate storage locations in separate buildings which axe physically isolated from each other.m.ANSI N45.2.12,"Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants"" IV-4B Revision 1 August 1974
~I n.ANSI N45.2.13,"Quality Assurance Requirements for Control of Procurement of Equipment, Materials and Services for Nuclear Power Plants," and regulatory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book-Revision 1)IV-4C Revision 1 August 1974
~'s~Q l, The major organizations participating in the quality assurance program are the Purchasing, Engineering, and Electric and Steam Production Departments; Quality Assurance; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board.Figure IV.2-l is an organizational chart showing these organizations and their relationship to.the corporate organization.
Positions responsible for the principal elements of the quality assurance program are the: Chairman of the Board Senior Vice President, Electric and Steam Vice President and Chief Engineer Quality Assurance Coordinator Quality Assurance Engineer, Operations Quality Assurance Engineer, Design Quality Assurance Engineer, Welding and Non-destructive Examination Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer In addition to the above individuals, two advisory groups are utilized to review and audit plant operations.
These are the Plant Operations Review Committee and the Nuclear


Safety Audit and Review Board.The Plant Operations Review Committee acts in an advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and Review Board advises the Senior Vice President, Electric and Steam.The qualifications of members and the responsibilites of these organizations are described in Appendix A to Provisional Operating License No.DPR-18, Section 6.0, Technical Specifications.
The major  organizations participating in the quality assurance program are the Purchasing, Engineering, and Electric and Steam Production Departments; Quality Assurance; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board. Figure IV.2-l is an organizational chart showing these organizations and their relationship to. the corporate organization.
The Chairman of the Board of the Rochester Gas and Electric Corporation directed the establishment of the quality assurance program and issued the governing policy t statement.
Positions responsible for the principal elements of the quality assurance program are the:
He has established the Nuclear Safety Audit.and Review Board to review and audit plant operations.
Chairman of the Board Senior Vice President, Electric and Steam Vice President and Chief Engineer Quality Assurance Coordinator Quality Assurance Engineer, Operations Quality Assurance Engineer, Design Quality Assurance Engineer, Welding and Non-destructive Examination Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer In addition to the above individuals, two advisory groups are utilized to review and audit plant operations. These are the Plant Operations Review Committee and the Nuclear
The Chairman of the Nuclear Safety Audit and Review Board is responsible'to the Chairman of the Board on all activities of the Nuclear Safety Audit and Review Board.The Senior Vice President, Electric and Steam has cor-porate responsibility for operation of Ginna Station in I accordance with applicable regulatory requirements.
He is responsible for establishing the policies and reguire-ments necessary to assure safe and reliable, operation of Ginna Station.He is also responsible for those items XV-6


delineated in Section 6.0, Technical Specifications.
Safety Audit and Review Board. The Plant Operations Review Committee acts in an advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit  and Review Board advises  the Senior Vice President, Electric and Steam. The qualifications of members and the responsibilites of these organizations are described in Appendix A to Provisional Operating License No. DPR-18, Section 6.0, Technical Specifications.
He has overall responsibility for and authority to.direct quality affecting activities.
The Chairman  of the Board of the Rochester Gas and Electric Corporation directed the establishment of the quality assurance program and issued the governing policy t
He has assigned the re-sponsibility for the detailed development and overall coordination of the quality assurance program to the Quality Assurance Coordinator.
statement. He has established  the Nuclear Safety Audit.
The responsibility for proper implementation of-the qua-lity assurance program requirements at Ginna Station has been assigned to the Ginna Station Superintendent.
and Review Board  to review  and audit plant operations.
The Vice President*and Chief Engineer is responsible for the design of plant modifications in accordance with applicable design bases, regulatory requirements, codes, a and standards.
The Chairman of the Nuclear Safety Audit and Review Board is responsible'to the Chairman of the Board on all activities of the Nuclear Safety Audit and Review Board.
He has the responsibility for prep ring drawings and specifications for the procurement of materials and components for plant maintenance and modification as required.'e is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing maintenance and repair procedures for major equipment.
The  Senior Vice President, Electric and Steam has cor-porate responsibility for operation of Ginna Station in    I accordance with applicable regulatory requirements.      He is responsible for establishing the policies    and reguire-ments necessary  to assure safe  and reliable, operation of Ginna  Station. He is also responsible for those items XV-6
The Quality Assurance Coordinator is responsible for establishing and executing the overall quality assurance program.He is responsible for assuring that the program satisfies the requirements of lOCFR50, Appendix B, that all applicable regulatory guides have been considered,  
 
delineated in Section 6.0, Technical Specifications.       He has overall responsibility for and authority to.direct quality affecting activities. He has assigned the re-sponsibility for the detailed development and overall coordination of the quality assurance program to the Quality Assurance Coordinator.
The responsibility for proper implementation of -the qua-lity assurance program requirements   at Ginna Station has been assigned to the Ginna Station Superintendent.
The Vice President *and Chief Engineer is responsible for the design of plant modifications in accordance with applicable design bases, regulatory requirements, codes, and standards. He has the responsibility for prep a ring drawings and specifications for the procurement of materials and components for plant maintenance and modification as required. 'e is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing maintenance and repair procedures for major equipment.
The Quality Assurance Coordinator is responsible for establishing and executing the overall quality assurance program. He is responsible for assuring that the program satisfies the requirements of 10CFR50, Appendix B, that all applicable regulatory guides have been considered,


and for keeping the total program updated.He is re-sponsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and reliably are established and followed.He provides management with objective information concerning quality, independent of the individual or group directly responsible for per-forming the specific activity.He has the authority and organizational freedom to assure all necessary quality affecting activities are performed.
and for keeping the total program updated. He is re-sponsible for assuring that all the planned   and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and reliably are established and followed. He provides management with objective information concerning quality, independent of the individual or group directly responsible for per-forming the specific   activity. He has the authority and organizational freedom to assure   all necessary quality affecting activities are performed. He is responsible for maintaining a quality assurance staff and directing its activities and for establishing and implementing a comprehensive audit program.
He is responsible for maintaining a quality assurance staff and directing its activities and for establishing and implementing a comprehensive audit program.The Quality Assurance Coordinator is a graduate engineer with at least six years of responsible experience, of which two years is in quality assurance and three'years in the design or operation of nuclear or fossil fuel power plants.The Quality Assurance Engineer, Operations is responsible for supervising the operational quality assurance program for Ginna Station.This includes writing quality assurance policies and procedures, coordinating supplier qualification and surveillance, and establishing and implementing the in-service inspection program.He is responsible for staying  
The Quality Assurance Coordinator is a graduate engineer with at least six years of responsible experience, of which two years is in quality assurance and three 'years in the design or operation of nuclear or fossil fuel power plants.
The Quality Assurance Engineer, Operations is responsible for supervising the operational quality assurance program for Ginna Station. This includes writing quality assurance policies and procedures, coordinating supplier qualification and surveillance, and establishing and implementing the in-service inspection program. He is responsible for staying


current in all applicable regulatory and code quality assurance requirements and providing guidance and assistance r to the Ginna Station Superintendent, the Ginna Station Quality Control Engineer, and other affected personnel on these requirements.
current in all applicable regulatory and code quality assurance requirements and providing guidance and assistance r
The Quality Assurance Engineer, Design is responsible for interpreting the requirements of 10CFR50, Appendix B and applicable regulatory and code requirements related to plant modifications and providing guidance and assistance to engineerin'g and station personnel on these requirements.
to the Ginna Station Superintendent, the Ginna Station Quality Control Engineer, and other affected personnel on these requirements.
He writes quality assurance policies and procedures related to design activities and interfaces between Engineering and other departments.
The Quality Assurance Engineer, Design is responsible for interpreting the requirements of 10CFR50, Appendix B and applicable regulatory and code requirements related to plant modifications and providing guidance and assistance to engineerin'g and station personnel on these requirements.
He is responsible for reviewing engineering and procurement documents to assure that quality assurance requirements are incorporated.
He writes quality assurance policies and procedures related to design activities and interfaces between Engineering and other departments.     He is responsible for reviewing engineering and procurement documents to assure that quality assurance requirements are incorporated.
The Quality Assurance Engineer, Welding and Nondestructive Examination is responsible for developing and qualifying procedures for special processes.
The Quality Assurance Engineer, Welding and Nondestructive Examination is responsible for developing and qualifying procedures for special processes.     He is also responsible for assuring that personnel are trained and qualified in special processes and for inspection activities in-volving nondestructive examination.
He is also responsible for assuring that personnel are trained and qualified in special processes and for inspection activities in-volving nondestructive examination.
The Purchasing Agent   is responsible for the   procurement of materials, services,     and components, from qualified IV-9
The Purchasing Agent is responsible for the procurement of materials, services, and components, from qualified IV-9  


suppliers, in accordance with applicable commercial, technical, and quality requirements.
suppliers, in accordance with applicable commercial, technical, and quality requirements. He maintains a listing of qualified suppliers determined through an evaluation made 'by Purchasing, Engineering, Operations, and Quality Assurance.
He maintains a listing of qualified suppliers determined through an evaluation made'by Purchasing, Engineering, Operations, and Quality Assurance.
The Ginna Station Superintendent is responsible for safe operation of Ginna Station. He is responsible for the operation, maintenance, repair, refueling, and modification of Ginna Station in accordance with the requirements of the quality assurance program. He is responsible for pro-viding qualified personnel to perform these activities in accordance'with approved drawings, specificationsi and procedures. He is also'esponsible   for those items delineated in Section 6;0, Technical Specifications.
The Ginna Station Superintendent is responsible for safe operation of Ginna Station.He is responsible for the operation, maintenance, repair, refueling, and modification of Ginna Station in accordance with the requirements of the quality assurance program.He is responsible for pro-viding qualified personnel to perform these activities in accordance'with approved drawings, specificationsi and procedures.
The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging,his responsi-bilities. He is responsible for the day-to-day operation of the station and implementing the policies, procedures i and directions of the Ginna Station Superintendent.
He is also'esponsible for those items delineated in Section 6;0, Technical Specifications.
The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for assuring that activities affecting quality are prescribed and carried out in accordance with approved drawings, specifications, and"
The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging,his responsi-bilities.He is responsible for the day-to-day operation of the station and implementing the policies, procedures i and directions of the Ginna Station Superintendent.
The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for assuring that activities affecting quality are prescribed and carried out in accordance with approved drawings, specifications, and"  


procedures.
procedures. In his day-to-day activities, he reports to the Ginna Station Assistant Superintendent. He is a member of the Plant Operations Review Committee and is responsible for the review of all plant procedures pre-sented to the Committee. He also reviews procurement documents initiated at the plant. He is responsible for the control of documents and records stored at the plant.
In his day-to-day activities, he reports to the Ginna Station Assistant Superintendent.
He co-ordinates inspection activities and assures that inspection requirements are included in approved procedures.
He is a member of the Plant Operations Review Committee and is responsible for the review of all plant procedures pre-sented to the Committee.
He coordinates the receipt inspection of incoming materials, parts, and components and the processing of material deficiency reports. He coordinates the processing of corrective action reports, and assures that corrective action is taken. He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superintendent with objective information concerning the quality of these activities.
He also reviews procurement documents initiated at the plant.He is responsible for the control of documents and records stored at the plant.He co-ordinates inspection activities and assures that inspection requirements are included in approved procedures.
The Ginna   Station Quality Control Engineer is assisted in the performance of his duties by a staff which includes an engineer and a technician who coordinate inspection and record-keeping activities, respectively. Additional inspectors are assigned to this group as required by the level of work   activities.
He coordinates the receipt inspection of incoming materials, parts, and components and the processing of material deficiency reports.He coordinates the processing of corrective action reports, and assures that corrective action is taken.He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superintendent with objective information concerning the quality of theseactivities.
The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which includes an engineer and a technician who coordinate inspection and record-keeping activities, respectively.
Additional inspectors are assigned to this group as required by the level of work activities.  


In addition to the Ginna'tation Quality Control Engineer,.
In addition to the Ginna'tation Quality Control Engineer,.
the Ginna Station Superintendent is assisted by other designated staff members in the implementation of certain quality assurance program requirements at the plant.These staff members are assigned responsibility for test-ing, storage of material and equipment, operating and test, status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling, and modification.
the Ginna Station Superintendent is assisted by other designated staff members in the implementation of certain quality assurance program requirements at the plant.
IV.3 Desi n Control Design activities are performed by Rochester Gas and Ele'ctric.Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.The Vice President and Chief Engineer is responsible for the design and control of design activities (including design interfaces) for the modification of structures,'f systems, or components.
These staff members are assigned   responsibility for test-ing, storage of material and equipment, operating and test, status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling, and modification.
Design control is implemented by means of engineering procedures which include: design considerations; design review requirements; internal and external interface I
IV.3   Desi n Control Design   activities are performed by Rochester   Gas and Ele'ctric.Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.
control considerations; design document review, approval distribution, control, and revision requirements; and corrective action.Design considerations include, as appropriate:
The Vice President and Chief Engineer     is responsible for the design and control of design     activities (including design interfaces) for the modification of structures,
physics, stress, materials, thermal, hydraulic, radiation and accident analysis;appropriate design bases, codes, standaxds and regulations; acceptance and rejection criteria;and quality assurance requirements.
    'f systems,   or components.
Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests as ap-pxopxiate to assure the adequacy of the design.The design of plant modifications's reviewed by an, engineer other than the one who performed the original design.This may be done by Rochester Gas and Electric design engineers or consulting engineers as required.The design also is reviewed by the Plant Operations Review Committee for acceptability for operation, maintenance, and repair.Spare or replacement parts must at least meet the original equipment technical and quality requirements.
Design control   is implemented by means   of engineering procedures which include:     design considerations;   design review requirements;   internal and external interface
For plant I modifications, standard"off the shelf" commercial or previously approved materials, parts, and equipment are selected and reviewed for suitability of application by 1 the design engineer.XV-l3  
 
I control considerations; design document review, approval distribution, control, and revision requirements; and corrective action. Design considerations include, as appropriate: physics, stress, materials, thermal, hydraulic, radiation and accident analysis; appropriate design bases, codes, standaxds and regulations; acceptance and rejection criteria; and quality assurance requirements.
Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests as ap-pxopxiate to assure the adequacy of the design.
The design of plant modifications's reviewed by an, engineer other than the one who performed the original design. This may be done by Rochester Gas and Electric design engineers or consulting engineers as required. The design also is reviewed by the Plant Operations Review Committee for acceptability for operation, maintenance, and repair.
Spare or replacement parts must at least meet the original equipment technical and quality requirements. For plant I
modifications, standard "off the shelf" commercial or previously approved materials, parts, and equipment are selected and reviewed for suitability of application by 1
the design engineer.
XV-l3
 
\
\
Design changes, j.ncluding field changes, are reviewed and approved in accordance with the same procedures as the original design.In general, design changes are reviewed and approved by the organizations
Design changes,   j.ncluding field changes, are reviewed and approved in accordance with the     same procedures   as the original design. In general, design changes are reviewed and approved by the organizations 'or individuals that performed the original design, review, and approval. Where this is not practical, other responsible design organizations or individuals are designated, provided they have access to pertinent background information and are competent in the specific design area.
'or individuals that performed the original design, review, and approval.Where this is not practical, other responsible design organizations or individuals are designated, provided they have access to pertinent background information and are competent in the specific design area.Design documents are collected, stored, and maintained in accordance with Section IV.l7.Design documents in-elude design criteria, analyses, specifications, drawings, design review records, and changes thereto.The Quality Assurance Coordinator is responsible for assuring that design control procedures, whether the work is done by Rochester Gas and Electric or by other organizations, are prepared and implemented and incorporate appropriate design control practices, checks, and re-views.Design control procedures are reviewed to assure that an independent design verification is performed; The Vice President and Chief Engineer is responsible for the timely approval and updating of specifications and drawings, as well as changes or deviations thereto, IV-14  
Design documents are collected, stored, and maintained in accordance with Section IV.l7.       Design documents   in-elude design criteria,   analyses,   specifications, drawings, design review records, and     changes thereto.
The Quality Assurance Coordinator is responsible for assuring that design control procedures, whether the work is done by Rochester Gas and Electric or by other organizations, are prepared and implemented and incorporate appropriate design control practices, checks, and re-views. Design control procedures are reviewed to assure that an independent design verification is performed; The Vice President and Chief Engineer is responsible for the timely approval and updating of specifications and drawings, as well as changes or deviations thereto, IV-14


utilized for purchase or installation of materials, parts, or components.
utilized for   purchase or   installation of materials, parts, or components. Any other design documents, specifi-cations, drawings, installation requirements, and changes thereto, are approved in the       same manner.
Any other design documents, specifi-cations, drawings, installation requirements, and changes thereto, are approved in the same manner.Errors and deficiencies detected in the design process are documented as conditions adverse to quality and con-trolled in accordance with the corrective action require-ments of Section IV.16.Design criteria and specifications, and changes thereto, are reviewed by Quality Assurance for the inclusion of quality assurance and quality control program require-ments as well as for the use of proper codes, material specifications, regulatory requirements, design bases, and quality standards.
Errors   and deficiencies detected in the design process are documented as conditions adverse to quality and con-trolled in accordance with the corrective action require-ments   of Section IV.16.
The Quality Assurance Coordinator reviews and approves any deviations from quality standards when.they occur.Plant modifications are controlled by means of applicable quality assurance and quality control procedures.
Design   criteria   and specifications, and changes thereto, are reviewed by Quality Assurance for the inclusion of quality assurance and quality control program require-ments as well as for the use of proper codes, material specifications, regulatory requirements, design bases, and quality standards.       The Quality Assurance Coordinator reviews and approves any deviations from quality standards when .they   occur.
These procedures provide for the preparation, review, and.approval of design documents, safety analyses, and plant modification procedures.
Plant modifications are controlled by means of applicable quality assurance and quality control procedures. These procedures provide for the preparation, review, and.
Proposed plant modifications are=reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.  
approval of design documents, safety analyses, and plant modification procedures. Proposed plant modifications are= reviewed by the Plant Operations Review Committee and Nuclear Safety     Audit and Review Board as required by Section 6.0, Technical       Specifications.


Procurement Document Control Procurement document control applies to the control of procurement documents for materials, parts, components, and services required to perform quality affecting activities.
Procurement Document Control Procurement document control applies to the control     of procurement documents     for materials, parts, components, and services required to perform quality affecting activities. Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, con-tracts, specifications, and drawings.
Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, con-tracts, specifications, and drawings.Procurement of materials, parts, components, and services is initiated by Ginna Station or Engineering Department staff personnel.
Procurement   of materials, parts, components, and services is initiated by Ginna Station or Engineering Department staff personnel. Procurement procedures require that organizations preparing procurement documents consider and include, as appropriate, the items listed in Table IV.4-1.
Procurement procedures require that organizations preparing procurement documents consider and include, as appropriate, the items listed in Table IV.4-1.Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station are re-viewed for concurrence by Quality Control and approved by the Ginna Station Superintendent or his designated representative.
Procurement documents,     including those requesting spare or replacement parts, initiated at Ginna Station are re-viewed for concurrence by Quality Control and approved by the Ginna Station Superintendent or his designated representative. Procurement documents   initiated in Engineering are reviewed for concurrence by Quality Assurance and approved by the- Vice President and Chief Engineer or his designated representative.
Procurement documents initiated in Engineering are reviewed for concurrence by Quality Assurance and approved by the-Vice President and Chief Engineer or his designated representative.
Evidence of review and approval of procurement documents is recorded on the 'documents or on the attached *control IV-16
Evidence of review and approval of procurement documents is recorded on the'documents or on the attached*control IV-16 1
form.These documents are maintained in Purchasing and plant records.After purchase requisitions, service'greements, contracts, specifications, and drawings have received the required reviews and approvals, a purchase order is issued to a qualified supplier and controlled as described in Section IV.7.Under no circumstances are purchasing requirements altered (except for quantity or pricing)during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve the original documents as described above.Engineering review of procurement documents includes verification of appropriate classifications, technical requirements, and code application.
Quality Assurance review of the above includes checks to verify that proper codes, regulatory requirements, and material specifications are invoked;that FSAR and Technical Supplement commit-ments are included;that ppropriate acceptance or rejection criteria are required;and that quality assurance require-'ents are incorporated.
Quality Control reviews procure-ment documents for spare or replacement parts for adequacy IV-17


of quality requirements and to determine similarity, compatibility, and the inclusion of the quality require-ments and acceptance criteria of the original design.Instructions, Procedures, and Drawin s Each Rochester Gas and Electric organization is re-sponsible for developing, reviewing, approving, and implementing procedures as required to implement the quality assurance program.These procedures cover activities such as document control, training of per-sonnel, and responsibilities and duties of personnel.
1 form. These documents  are maintained in Purchasing and plant records.
The Quality Assurance Coordinator is responsible for the review and approval of these procedures.
After purchase requisitions, service'greements, contracts, specifications, and drawings have received the required reviews and approvals, a purchase order is issued to a qualified supplier and controlled as described in Section IV.7. Under no circumstances are purchasing requirements altered (except for quantity or pricing) during order placement unless review and concurrence    is obtained              from those who were required to review, concur with, and approve the original documents as described above.
Table IV.l-l provides a summary of the subject matter contained in the procedures which are used to implement the quality assurance program.Procurement documents require suppliers and contractors to have appropriate instructions, procedures, specifications, and drawings.The Ginna Station Superintendent is responsible for pre-paring, reviewing, approving, and implementing instructions and procedures associated with operation, maintenance, repair, refueling, and modification.
Engineering review of procurement documents includes verification of appropriate classifications, technical requirements, and code  application. Quality Assurance review of the above includes checks to verify that proper codes, regulatory requirements, and material specifications are invoked; that  FSAR and   Technical Supplement commit-ments are included;  that ppropriate acceptance or rejection criteria are required; and that quality assurance    require-'ents are incorporated. Quality Control reviews procure-ment documents for spare or replacement parts for adequacy IV-17
This includes in-structions and procedures listed in USAEC Regulatory Guide l.33 for administrative control;general plant operation; startup, operation, and shutdown of safety IV-18


related systems;correction of abnormal, offnormal, or alarm conditions; combat of emergencies and other sig-nificant events;radioactivity control;control of measuring and test equipment; chemical and radiochemical control;and fuel handling and refueling.
of quality requirements and to determine similarity, compatibility, and the inclusion of the quality require-ments and acceptance criteria of the original design.
He is'lso responsible for the issuance of appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the completion of plant modifications.
Instructions, Procedures, and Drawin s Each Rochester Gas and Electric organization is re-sponsible for developing, reviewing, approving, and implementing procedures     as required to implement the quality  assurance  program. These procedures cover activities    such as document  control, training of per-sonnel, and responsibilities and duties of personnel.
The Plant Operations Review Committee has the responsibility for reviewing procedures prior to their approval by the Ginna Station Superintendent as required by the Section 6.0, Technical Specifications.
The Quality Assurance Coordinator is responsible for the review and approval of these procedures. Table IV.l-l provides a summary of the subject matter contained in the procedures which are used to implement the quality assurance    program. Procurement documents require suppliers and  contractors to have appropriate instructions, procedures,   specifications,   and drawings.
Quality Control is responsible for reviewing plant ad-ministrative, operating, maintenance, repair, refueling, and modification procedures prior to use to assure quality assurance req'uirements are included.The Vice President and Chief Engineer is responsible for preparing, reviewing, approving and issuing specifications, drawings, and installation requirements associated with plant modifications.
The Ginna    Station Superintendent is responsible for pre-paring, reviewing, approving, and implementing instructions and procedures associated with operation, maintenance, repair, refueling, and modification. This includes in-structions and procedures listed in USAEC Regulatory Guide l.33 for administrative control; general plant operation; startup, operation, and shutdown of safety IV-18
These documents require those per-forming the work to obtain, understand, and comply with appropriate instructions, procedures, specifications,  


and drawings.The Vice President and Chief Engineer has established procedures for maintaining drawings and I specifications in a current status.These procedures cover updating of as-built drawings after plant modifi-cations and the revision, approval, distribution, and control of all drawings and specifications.
related systems; correction of abnormal, offnormal, or alarm conditions; combat of emergencies and other sig-nificant events; radioactivity control; control of measuring and  test equipment; chemical and radiochemical control; and fuel handling and refueling. He is'lso responsible for the issuance of appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the completion of plant modifications.
The  Plant Operations Review Committee has the responsibility for reviewing procedures prior to their approval by the Ginna Station Superintendent as required by the Section 6.0, Technical Specifications.
Quality Control is responsible for reviewing plant ad-ministrative, operating, maintenance, repair, refueling, and modification procedures prior to use to assure quality assurance req'uirements are included.
The Vice  President and Chief Engineer is responsible for preparing, reviewing, approving and issuing specifications, drawings, and installation requirements associated with plant modifications. These documents require those per-forming the work to obtain, understand, and comply with appropriate instructions, procedures, specifications,
 
and drawings.       The Vice President and Chief Engineer has   established procedures for maintaining drawings and I
specifications in a current status. These procedures cover updating of       as-built drawings after plant modifi-cations and the revision, approval, distribution, and control of all drawings and specifications.
Quality Assurance is responsible for the review of design criteria and specifications, and changes thereto, for concurrence with quality assurance'requirements.
Quality Assurance is responsible for the review of design criteria and specifications, and changes thereto, for concurrence with quality assurance'requirements.
The Ginna Station Quality Control Engineer is responsible I for preparing and implementing plant quality control procedures.
The Ginna   I Station Quality Control Engineer is responsible for preparing and implementing plant quality control procedures.       The procedures require the approval of the Quality Assurance Coordinator and the Ginna Station Superintendent.
The procedures require the approval of the Quality Assurance Coordinator and the Ginna Station Superintendent.
Persons preparing and approving documents are. responsible for assuring that specifications, instructions, pro-cedures, and drawings include'ppropriate quantitative or qualitative acceptance criteria for determining that important activities have been satisfactorily accomp-lished and assuring that the documents are kept current.
Persons preparing and approving documents are.responsible for assuring that specifications, instructions, pro-cedures, and drawings include'ppropriate quantitative or qualitative acceptance criteria for determining that important activities have been satisfactorily accomp-lished and assuring that the documents are kept current.Surveillance of the implementation of instructions, drawings, and procedures for operation, maintenance, XV-20  
Surveillance of the implementation of instructions, drawings, and procedures for operation, maintenance, XV-20


repair, modification, and refueling is the responsibility of the Ginna Station Quality Control Engineer.Document Control Procedures are established to control the issuance of procedures, instructions, drawings, and specifications.
repair, modification, and refueling is the responsibility of the Ginna Station Quality Control Engineer.
Standard document, control requirements are contained in the Quality Assurance Manual.The Ginna Station Superin-tendent is responsible for the control of,all documents issued at Ginna Station.Engineering is responsible for the control of all documents issued by Engineering, Quality Assurance, and Purchasing.
Document   Control Procedures   are established to control the issuance of procedures, instructions, drawings, and specifications.
Engineering and Operations have separa'te procedures to control documents in accordance with the requirements of the Quality Assurance Manual.The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of document involved, its importance to safety, and the intended use of the document.It specifies the types of documents which must be controlled; identifies the difference between controlled and uncontrolled copies of the same document;includes the method for identifying holders of controlled copies;requires that only controlled copies of a document be used for official purposes;requires that lists of effective revisions be issued periodically; requires lists IV-21  
Standard document, control requirements are contained in the Quality Assurance Manual. The Ginna Station Superin-tendent is responsible for the control of,all documents issued at Ginna Station. Engineering is responsible for the control of all documents issued by Engineering, Quality Assurance, and Purchasing. Engineering and Operations have separa'te procedures to control documents in accordance with the requirements of the Quality Assurance Manual.
The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of document involved, its importance to safety, and the intended use of the document. It specifies the types of documents which must be controlled; identifies the difference between controlled and uncontrolled copies of the same document; includes the method for identifying holders of controlled copies; requires that only controlled copies of a document be used for official purposes; requires that lists of effective revisions be issued periodically; requires lists IV-21


of document.'olders to be maintained by the distributors; and requires that distributors transmit controlled documents using approved forms internally and externally.
of document.'olders to be maintained by the distributors; and requires that distributors transmit controlled documents using approved forms internally and externally. Types of documents which are controlled include Technical Specifications, FSAR, Technical Supplements, Quality Assurance Manual, procedures (such as, quality assurance, engineering, purchasing, repair, maintenance, test, calibration, fuel handling, modification, and administrative), specifications, drawings, and nonconformance and corrective action docu-mentation. Suppliers of materials, equipment, and services are required in procurement documents to provide for control of documents, including manufacturing inspection and test-ing instructions.
Types of documents which are controlled include Technical Specifications, FSAR, Technical Supplements, Quality Assurance Manual, procedures (such as, quality assurance, engineering, purchasing, repair, maintenance, test, calibration, fuel handling, modification, and administrative), specifications, drawings, and nonconformance and corrective action docu-mentation.
The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to insure that documents are available when required; to properly review and approve documents such as procedures, instructions, specifications, and drawings; to provide the same reviews and approvals for changes to documents as was required of the original document; to require that organizations which review and approve documents have access to pertinent information and adequate knowledge of the original document intent; to assure that approved changes are promptly transmitted for incorporation IV-22
Suppliers of materials, equipment, and services are required in procurement documents to provide for control of documents, including manufacturing inspection and test-ing instructions.
The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to insure that documents are available when required;to properly review and approve documents such as procedures, instructions, specifications, and drawings;to provide the same reviews and approvals for changes to documents as was required of the original document;to require that organizations which review and approve documents have access to pertinent information and adequate knowledge of the original document intent;to assure that approved changes are promptly transmitted for incorporation IV-22  


into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.Quality Assurance and Quality Control are responsible for review and concurrence of procurement documents and, therefore, procurement document control requirements.
into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.
Quality Assurance and Quality Control are further re-sponsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.
Quality Assurance   and Quality Control are responsible for review and concurrence   of procurement documents and, therefore, procurement document control requirements.
Control of Purchased Ma't'erial','
Quality Assurance   and Quality Control are further re-sponsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.
ui ment, and Services Procurement documents, supplier selection, supplier sur-veillance, and receipt inspection are the four major means used in controlling purchased material, equipment, components, and services.All procurement is conducted in accordance with procurement documents as stated in Section IV-4.All reviews, inspections, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier is capable of providing acceptable, quality products.Suppliers must be on an approved suppliers'ist prior to being issued,a purchase order.Supplier evaluations are conducted by a team consisting of qualified personnel IV-23  
Control of Purchased Ma't'erial','   ui ment, and Services Procurement documents, supplier selection, supplier sur-veillance, and receipt inspection are the four major means used in controlling purchased material, equipment, components, and services. All procurement is conducted in accordance with procurement documents as stated in Section IV-4. All reviews, inspections, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier is capable of providing acceptable, quality products.
Suppliers must be on an approved suppliers'ist prior to being issued,a purchase order. Supplier evaluations are conducted by a team consisting of qualified personnel IV-23


from Quality Assurance, Engineering, Purchasing, and other interested parties or their representatives as re-quired.The depth of the supplier evaluation varies depending on the complexity and importance to safety of the item involved.For example, for mass produced or off-the-shelf items, only a check of past performance may be necessary.
from Quality Assurance,   Engineering, Purchasing, and other interested parties or their representatives as re-quired. The depth of the supplier evaluation varies depending on the complexity and importance to safety of the item involved. For example, for mass produced or off-the-shelf items, only a check of past performance may be necessary. On the other hand, for complex, im-portant items a very thorough review is performed.
On the other hand, for complex, im-portant items a very thorough review is performed.
Engineering is responsible for evaluating the overall design or manufacturing capability of the supplier   in-eluding his particular technical ability to produce the design, service, item, or component delineated in the procurement documents. As part of this review, the supplier's design capabilities, machinery capabili-ties, special fabrication processes, output capabilities, handling capabilities, testing facilities, service capabilities, and experience are reviewed.
Engineering is responsible for evaluating the overall design or manufacturing capability of the supplier in-eluding his particular technical ability to produce the design, service, item, or component delineated in the procurement documents.
Quality Assurance is responsible for evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric requirements. The review includes consideration of: company organization, quality assurance
As part of this review, the supplier's design capabilities, machinery capabili-ties, special fabrication processes, output capabilities, handling capabilities, testing facilities, service capabilities, and experience are reviewed.Quality Assurance is responsible for evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric requirements.
The review includes consideration of: company organization, quality assurance  


personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices, acceptance criteria, required quality assurance records and their retention, and quality assurance requirements and controls im-posed by the supplier on his subcontractors.
personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures,   calibration practices, acceptance criteria, required quality assurance records and their retention, and quality assurance requirements and controls im-posed by the   supplier on his subcontractors. Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assurance requirements.
Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assurance requirements.
Quality Assurance and Engineering document their supplier evaluation results in reports which discuss areas in-vestigated, findings, and conclusions. Concurrence of Purchasing, Engineering, Operations, and Quality Assurance is required to place a supplier on the qualified suppliers list. One organization can remove a supplier from the list without concurrence of the others.
Quality Assurance and Engineering document their supplier evaluation results in reports which discuss areas in-vestigated, findings, and conclusions.
Quality Assurance is responsible for determining and documenting the degree of supplier surveillance (including review, inspection, or audit) required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance. The objective of supplier surveillance is to provide a sampling review of the supplier's quality assurance program implementation and of product conformance with respect, to the purchase XV-25
Concurrence of Purchasing, Engineering, Operations, and Quality Assurance is required to place a supplier on the qualified suppliers list.One organization can remove a supplier from the list without concurrence of the others.Quality Assurance is responsible for determining and documenting the degree of supplier surveillance (including review, inspection, or audit)required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance.
The objective of supplier surveillance is to provide a sampling review of the supplier's quality assurance program implementation and of product conformance with respect, to the purchase XV-25  
'
order requirements.
For complex equipment and designs, Quality Assurance and Engineering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.The results of the surveillance trip are documented by means of inspection sheets or trip reports which are distri-buted to the Quality Assurance Coordinator, the Vice President and Chief Engineer, the Ginna Station Quality Control Engineer, and the Ginna Station Superintendent.
When a deviation from purchase order requirements is noted, the Quality Assurance representative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work, if.necessary.
The Ginna Station Quality Control Engineer is responsible for surveillance of site contractors to assure that they I meet all technical and quality requirements.
The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.
The Ginna Station Superintendent is responsible for re-ceiving and storing materials, parts, and components.
Upon arrival, the plant storekeeper logs the item, places a"hold" tag on the item, and notifies Quality Control that the item has arrived.IV-26


Quality Control is responsible for receipt inspection upon delivery at the plant of material, equipment, and associated services for operation, maintenance, repair, modifications, and refueling.
order requirements. For complex equipment and designs, Quality Assurance  and Engineering are responsible for joint  development  of surveillance plans in advance of surveillance trips to identify areas to be reviewed.
This inspection includes the use of written procedures or checklists to.verify that the material, equipment, and services conform to the procurement documents (if this has not been performed by source inspections) and that documentary evidence of con-formance is available at the plant prior to installation or use.Documentary evidence sufficient to identify the codes, standards, or specifications met by the purchased material, equipment, and services is retained.In the event a final source inspection is conducted prior'to the arrival at, the plant, Quality Control performs an in-spection for shipping damage or lost parts and a document check to assure that the required documentation has been reviewed and is complete.A receiving inspection checklist is completed for all items received to document, the extent of the inspection performed, including the documents checked, and the inspection results.If the item and documentation are adequate, Quality Control labels the item as"Accepted", files the documentation and receipt inspection results, and returns the item to the station stockroom.
The  results of the surveillance trip are documented by means of inspection sheets or trip reports which are distri-buted to the Quality Assurance Coordinator, the Vice President and Chief Engineer, the Ginna Station Quality Control Engineer, and the Ginna Station Superintendent.
Xf the item is nonconforming or the
When a deviation from purchase order requirements is noted, the Quality Assurance representative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work,   if
.necessary.
The Ginna  Station Quality Control Engineer is responsible for surveillance of site contractors to assure that they I
meet all technical and quality requirements. The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.
The Ginna  Station Superintendent is responsible for re-ceiving and storing materials, parts, and components.
Upon arrival, the plant storekeeper logs the item, places a "hold" tag on the item, and notifies Quality Control that the item has arrived.
IV-26


documentation is incomplete, Quality Control initiates a material deficiency report which is controlled in accordance with Section IV.15.All items issued must bear an acceptance tag and have documentation to support the acceptability of the item.In the event the traceability is lost ox the documentation review is unsatisfactory, the item becomes nonconforming and may not'be released for use.Identification and C'ont'rol'f Ma't'e'ri'a'1's', Parts, and Com onents The identification and control of materials, parts, and components is accomplished in accordance with written require-ments and applies to material, parts, or components in any stage of fabrication, storage, or installation.
Quality Control is responsible for receipt inspection upon delivery at the plant of material, equipment, and associated services for operation, maintenance, repair, modifications, and refueling. This inspection includes the use of written procedures or checklists to .verify that the material, equipment, and services conform to the procurement documents    (if this has not been performed by source inspections)  and  that documentary evidence of con-formance is available at the plant prior to installation or use. Documentary evidence sufficient to identify the codes, standards, or specifications met by the purchased material, equipment, and services is retained. In the event a final source inspection is conducted prior'to the arrival at, the plant, Quality Control performs an in-spection for shipping  damage  or lost parts and a document check to assure that the required documentation has been reviewed and is complete. A receiving inspection checklist is completed for all items received to document, the extent of the inspection performed, including the    documents checked, and the inspection results.
Identi-fication and control requirements are established by either an existing procedure or requirements documents which are pxepaxed during the planning stages of a project.The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports;specification of the degree of identification and'control necessary; location and method of identification to preclude a degradation of the item's functional capability or quality;and the proper identification of materials,
If the  item and documentation are adequate, Quality Control labels the item as "Accepted", files the documentation and receipt inspection results, and returns the item to the station stockroom. Xf the item is nonconforming or the


parts, and components prior to release for manufacturing, shipping, construction, and installation.
documentation  is incomplete, Quality Control initiates a material deficiency report which is controlled in accordance with Section IV.15.
The Vice President and Chief Engineer is responsible for assuring that.specifications contain appropriate requirements for the identification and control of materials, parts, or components.
All items  issued must bear an acceptance        tag and have documentation to support the acceptability of the item.
Suppliers are'equired to assure that all required documentation for an item is properly identified and related to the item.Each item is required to be physically identified, either by marking on the item or by tags.Physical identification by purchase order number is used to the maximum extent.possible for rela'ting an item at any time to applicable documentation.
In the event the traceability is lost ox the documentation review  is unsatisfactory, the item   becomes    nonconforming and  may not'be released for use.
Identification is either on the item or records traceable to the item.Where physical~identification is impractical, physical separation, procedural control, or other appropriate means are employed.The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant.Procedures covering the identification and control of materials, parts, and components are prepared by Quality Control and approved by the Ginna Station Superintendent.
Identification and C'ont'rol'f Ma't'e'ri'a'1's', Parts, and Com onents The identification and control of materials, parts, and components is accomplished in accordance with written require-ments and applies to  material, parts, or       components in any stage  of fabrication, storage, or installation. Identi-fication and control requirements are established by either an existing procedure or requirements documents which are pxepaxed during the planning stages of a project. The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and  inspection documents, and physical and chemical mill test reports; specification of the degree of identification and 'control necessary; location and method of identification to preclude a degradation of the item's functional capability or quality; and the proper identification of materials,
Xn the event that traceability is lost for a specific item, it is handled as nonconforming material and deviations
~a


and waivers are controlled and documented in acc'ordance with Section IV.15.Control of S ecial Proce'sses Written procedures are established to control special processes, such as welding, heat treating, and nondestructive examination to assure compliance with applicable codes, standards, and design specifications.
parts,  and components  prior to release for manufacturing, shipping, construction, and installation.
Qualification of personnel and procedures complies with the requirements of applicable codes and standards.
The  Vice President and Chief Engineer is responsible for assuring that. specifications contain appropriate requirements for the identification    and control of materials, parts, or components. Suppliers are'equired to assure that all required documentation for an item is properly identified and related to the item. Each item is required to be physically identified, either by marking on the item or by tags.
When special process qualification requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification requirements.
Physical identification by purchase order number is used to the maximum extent. possible for rela'ting an item at any time to applicable documentation. Identification is either on the item or records traceable to the item. Where physical
The Vice President and Chief.Engineer and the Ginna Station Superintendent are responsible for requiring suppliers, in procurement documents, to control special processes in accordance with the above requirements.
~
Quality Assurance and Quality Control are responsible for reviewing procure-ment.documents to assure that.requirements for control of special processes are included.Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Quality Assurance.
identification is impractical, physical separation, procedural control, or other appropriate    means  are employed.
The Ginna  Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant. Procedures  covering the identification and control of materials, parts, and components are prepared by Quality Control and approved by the Ginna Station Superintendent.
Xn  the event that traceability is lost for    a specific item, it is  handled as nonconforming material and deviations
                    ~ a
 
and waivers are   controlled and documented in acc'ordance with Section IV.15.
Control of S ecial Proce'sses Written procedures are established to control special processes,   such as welding, heat treating, and nondestructive examination to assure compliance with applicable codes, standards,   and design specifications. Qualification of personnel and   procedures complies with the requirements of applicable codes and standards. When special process qualification requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification requirements.
The   Vice President and Chief .Engineer and the Ginna Station Superintendent are responsible for requiring suppliers, in procurement documents, to control special processes in accordance with the above requirements.     Quality Assurance and Quality Control are responsible for reviewing procure-ment. documents to assure that. requirements for control of special processes are included.
Rochester Gas and   Electric procedures for special processes are prepared,   reviewed, and approved by Quality Assurance.
Special process procedures submitted by suppliers and contractors are reviewed and approved by Quality Assurance.
Special process procedures submitted by suppliers and contractors are reviewed and approved by Quality Assurance.
IV-30  
IV-30


The Ginna Station Maintenance Engineer is responsible for assuring that.personnel performing special processes under his cognizance are qualified and are using qualified procedures in accordance with applicable codes, specifi-cations, and standards.
The Ginna   Station Maintenance Engineer is responsible for assuring that. personnel performing special processes under his cognizance are qualified and are using qualified procedures in accordance with applicable codes, specifi-cations, and standards. Quality Assurance is responsible for the qualification of welding     and NDE personnel and procedures. Engineering maintains records for personnel and procedures   to demonstrate that required qualifications have been   obtained and are kept current.
Quality Assurance is responsible for the qualification of welding and NDE personnel and procedures.
Quality assurance and Quality Control perform surveillance, inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.
Engineering maintains records for personnel and procedures to demonstrate that required qualifications have been obtained and are kept current.Quality assurance and Quality Control perform surveillance, inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.
Procedures   prepared   for the control of plant activities include inspection requirements and hold points as re-quired by drawings, instructions, requirements docu-ments, specifications, codes, standards, or regulatory requirements. Instructions for conducting inspections are contained in Quality Control inspection procedures.
Procedures prepared for the control of plant activities include inspection requirements and hold points as re-quired by drawings, instructions, requirements docu-ments, specifications, codes, standards, or regulatory requirements.
These inspection procedures and all supporting specifica-tions and drawings are provided to inspection personnel for use prior to performing the inspection. Inspection requirements and hold points are utilized to verify con-formance   of activities to the
Instructions for conducting inspections are contained in Quality Control inspection procedures.
                    ~ I documented instructions,
These inspection procedures and all supporting specifica-tions and drawings are provided to inspection personnel for use prior to performing the inspection.
Inspection requirements and hold points are utilized to verify con-formance of activities to the documented instructions,~I


specifications, and drawings for accomplishing the activity.Quality Control inspection procedures include the identifi-cation of quality characteristics to be inspected, a des-cription of the method of inspection to be used, the identification of the'organization responsible for per-forming the inspection', the acceptance and rejection criteria, the requirements for the recording of-in-spection results, and the requirements for providing evidence of completion and certification of the in-spection activity.Inspections are performed by.Quality Control personnel who are independent of the personnel performing the work.Outside contractors are'equired by procurement documents to have'and follow similar procedures and to use independent inspectors.
specifications, and drawings for accomplishing the activity.
In-spectors are sufficiently trained to adequately evaluate 1 the activity they are inspecting.
Quality Control inspection procedures include the identifi-cation of quality characteristics to be inspected, a des-cription of the method of inspection to be used, the identification of the 'organization responsible for per-forming the inspection', the acceptance and rejection criteria, the requirements for the recording of -in-spection results, and the requirements for providing evidence of completion and certification of the in-spection   activity. Inspections     are performed by. Quality Control personnel who are independent of the personnel performing the work. Outside contractors are'equired by procurement documents to have 'and follow similar procedures and to use independent inspectors.       In-spectors are sufficiently trained to adequately evaluate 1
Quality Control personnel are responsible for performing inspections, as required, during plant operation, main-tenance, repair, refueling, and modification when the work is performed by Rochester Gas and Electric personnel.
the activity they are inspecting.
When the work is performed by outside contractors, Quality Control is responsible for surveillance of the subcontractor s inspection activities.
Quality Control personnel are responsible for performing inspections, as required, during plant operation, main-tenance, repair, refueling, and modification when the work   is performed by Rochester Gas and Electric personnel.
All inspection equipment is calibrated and controlled in accordance with Section IV.12.Calibration status is verified by inspection personnel prior to performing an inspection operation.
When the work is performed by outside contractors, Quality Control is responsible for surveillance of the subcontractor   s   inspection activities. All inspection equipment is calibrated and controlled in accordance with Section IV.12. Calibration status is verified by inspection personnel prior to performing an inspection operation.
IV-32  
IV-32


In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing methods, equipment, and personnel is provided.Both inspection and process monitoring are required when" control is inadequate without both.The Vice President and Chief Engineer is responsible for including inspection requirements in engineering specifications.
In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing methods, equipment, and personnel is provided. Both inspection and process monitoring are required when" control is inadequate without both.
Quality Assurance is responsible for assuring that adequate inspection requirements are included in engineering specifications and for establishing the re-quirements for the inservice inspection program.1 The Ginna Station Quality Control Engineer is responsi-4 ble for assuring that adequate inspection requirements and hold points are included in operation, maintenance, repair, refueling, and modification procedures.
The Vice President and Chief Engineer is responsible for including inspection requirements in engineering specifications.
He is also responsible for the assignment of qualified in-spection personnel required for inspection of quality affecting activities and for coordinating the perfor-mance of and conducting the surveillance of inservice inspection.
Quality Assurance is responsible for assuring that adequate inspection requirements are included in engineering specifications and for establishing the re-quirements for the inservice inspection program.
IV-33  
1 The Ginna Station Quality Control Engineer is responsi-4 ble for assuring that adequate inspection requirements and hold points are included in operation, maintenance, repair, refueling, and modification procedures. He is also responsible for the assignment of qualified in-spection personnel required for inspection of quality affecting activities and for coordinating the perfor-mance of and conducting the surveillance of inservice inspection.
IV-33


The program for inservice inspection of the reactor coolant system and other safety related systems is con-tained in Section 4.2, Technical Specifications.
The program   for inservice inspection of the reactor coolant system and other safety related systems is con-tained in Section 4.2, Technical Specifications.
IV.11 Test Control Whenever testing is required to demonstrate that a material, part, component, or system will perform satis-factorily in service, a test program is instituted employ-ing written and approved procedures which are in accordance with basic requirements established in Technical Specifications, drawings, instructions, procurement documents, specificationsf codes, standards, and.regulatory requirements.
IV.11 Test Control Whenever testing is required to demonstrate that a material, part, component, or system will perform satis-factorily in service, a test program is instituted employ-ing written and approved procedures which are in accordance with basic requirements established in Technical Specifications, drawings, instructions, procurement documents, specificationsf codes, standards, and .regulatory requirements. The test program requires the identification, control, and documentation of all tests and the preparation of written procedures required for satisfactory accomplishment of the testing.
The test program requires the identification, control, and documentation of all tests and the preparation of written procedures required for satisfactory accomplishment of the testing.Written test procedures and checklists include: necessary test equipment and calibration requirements; material requirements; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria;instructions for disposition of deviations; data collection requirements; and test result approval.The Ginna Station Superintendent is responsible for the station test program, including the surveillance test program required'by Section 4.0, Technical Specifications.
Written test procedures and checklists include: necessary test equipment and calibration requirements; material requirements; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria; instructions for disposition of deviations; data collection requirements; and test result approval.
IV-34  
The Ginna Station Superintendent is responsible for the station test program, including the surveillance test program required'by Section 4.0, Technical Specifications.
IV-34


Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Con-trol, and approved by the Ginna Station Superintendent.
Test procedures are prepared by the plant     staff, reviewed by the   Plant Operations Review Committee and Quality Con-trol, and approved by the Ginna Station Superintendent.
The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved procedures.
The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner   utilizing written   and approved procedures. When contractors are employed for'tests, the contractor is re-quired to perform testing in accordance with his quality assurance program requirements. All test results   are required to be documented, reviewed, and approved by those responsible for performing the test.
When contractors are employed for'tests, the contractor is re-quired to perform testing in accordance with his quality assurance program requirements.
The Vice President and Chief Engineer is responsible for assuring that required tests for modifications are re-
All test results are required to be documented, reviewed, and approved by those responsible for performing the test.The Vice President and Chief Engineer is responsible for assuring that required tests for modifications are re-,quired in engineering specifications.
,quired in engineering specifications. He is further responsible for providing engineering assistance to the Ginna Station staff in the preparation of modification-related test procedures. Engineering is responsible for reviewing   and approving   modification-related test results.
He is further responsible for providing engineering assistance to the Ginna Station staff in the preparation of modification-related test procedures.
Control of Measurin     and Test E ui ment The calibration   and control system for measuring and test equipment includes calibration procedures, estab-lishment of calibration frequencies, and maintenance and control requirements of measuring and test in-IV-35
Engineering is responsible for reviewing and approving modification-related test results.Control of Measurin and Test E ui ment The calibration and control system for measuring and test equipment includes calibration procedures, estab-lishment of calibration frequencies, and maintenance and control requirements of measuring and test in-IV-35  


struments, tools, gauges, shop standards, and nondes-tructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems,.and structures.
struments, tools, gauges, shop standards,   and nondes-tructive test equipment which are to be used   in the measurement, inspection, and monitoring of components, systems,. and structures. Calibration procedures in-clude step-by-step methods for calibration and require-ments for instrument accuracy. Calibration frequency is based on required accuracy, degree of usage, stability characteristics, .manufacturer ' recommendations,   ex-perience, and other conditions af fecting measurement capability.
Calibration procedures in-clude step-by-step methods for calibration and require-ments for instrument accuracy.Calibration frequency is based on required accuracy, degree of usage, stability characteristics,.manufacturer
Control of measuring and test equipment requires: a recall system assuring timely calibration of equipment; a system providing unique identification of equipment,
'recommendations, ex-perience, and other conditions af fecting measurement capability.
'traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing traceability of shop standards to nationally recognized standards (where national standards do not exist, procedures contain instructions to document. the basis for calibration) and periodic revalidation of shop standards; a system providing for records to be maintained which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration dates; and a system controlling the purchase requirements of IV-36
Control of measuring and test equipment requires: a recall system assuring timely calibration of equipment; a system providing unique identification of equipment,'traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing traceability of shop standards to nationally recognized standards (where national standards do not exist, procedures contain instructions to document.the basis for calibration) and periodic revalidation of shop standards; a system providing for records to be maintained which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration dates;and a system controlling the purchase requirements of IV-36 I
new equipment to be entexed into the calibration and control system including requirements for accuracy, stability, and repeatability under normal use conditions.
In the event a measuring instrument is found out.of calibration, an investigation is conducted to determine the validity of previous measurements.
The Ginna Station Superintendent is responsible for the procedures and program required to assure control and calibration of measuring and test, equipment at Ginna Station in ac'cordance with the above requirements.
In-struments specified in Section 4.1, Technical Specifications, are included in the program.Tools, gauges, and instruments necessary for maintenance, in-spection, and test are calibrated and controlled in accordance with station procedures.
Measuring, test, or inspection equipment used by Quality Control is included in the program.IV.13 Handlin , Stora e, an'd'hi in The Ginna Station Superintendent is responsible for develop.-s ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment'delivered to or located at Ginna Station.Under normal circumstances, manufacturer's specific written IV-37


instructions and recommendations and purchase specification requirements aie invoked for cleanliness, preservation, special handling, and storage with respect to environ-mental requirements.
I new equipment  to be entexed into the calibration and control system including requirements for accuracy, stability, and repeatability under normal use conditions.
In the absence of, or in addition to, specific manufacturer requirements, the superintendent may I invoke additional requirements in accordance with the plant procedures.
In the event a measuring instrument is found out. of calibration, an investigation is conducted to determine the validity of previous measurements.
The Vice President'and Chief Engineer is responsible for specifying in procurement documents and in engineering specification's that written procedures be used, as ap-propriate, for the handling, shipping, storage, cleaning,'I and preservation of materials and equipment procured for modifications.
The Ginna  Station Superintendent is responsible for the procedures and program required to assure control and calibration of measuring and test, equipment at Ginna Station in ac'cordance with the above requirements. In-struments specified in Section 4.1, Technical Specifications, are included in the program. Tools, gauges,  and instruments necessary  for maintenance, in-spection, and test are calibrated and controlled in accordance with station procedures. Measuring, test, or inspection equipment used by Quality Control is included in the program.
These procedures are prepared by con-.tractors or by the station staff as appropriate.
IV.13 Handlin  , Stora e, an'd'hi    in The Ginna  Station Superintendent is responsible for develop.-
Rochester Gas and Electric procedures are reviewed and approved by Quality Control and the Ginna Station Superintendent.
s ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment'delivered to or located at Ginna Station. Under normal circumstances, manufacturer's specific written IV-37
 
instructions   and recommendations and purchase specification requirements aie invoked for cleanliness,     preservation, special handling, and storage with respect to environ-mental requirements. In the absence of, or in addition to, specific manufacturer requirements, the superintendent may I
invoke additional requirements in accordance with the plant procedures.
The Vice President 'and Chief Engineer is responsible for specifying in procurement documents and in engineering specification's that written procedures be used, as ap-propriate, for the handling, shipping, storage, cleaning,
                        'I and preservation of materials and equipment procured for modifications. These procedures are prepared by con-
.tractors or by the station staff as appropriate. Rochester Gas and Electric procedures are reviewed   and approved by Quality Control   and the Ginna Station Superintendent.
In the preparation of procurement documents, plant procedures, and contractor procedures, consideration of handling, ship-ping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of manufacturing and installation prior to operational acceptance.
In the preparation of procurement documents, plant procedures, and contractor procedures, consideration of handling, ship-ping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of manufacturing and installation prior to operational acceptance.
IV-38  
IV-38


Quality Assurance is responsible for review of engineering specifications and, contractor procedures to assure that'proper handling, storing, and shipping requirements have been specified.
Quality Assurance is responsible for review of engineering specifications and, contractor procedures to assure that
Quality Control is responsible for sur veillance of handling, storage, and shipping activities I by suppliers, Rochester Gas and Electric personnel, and contractors.
'proper handling, storing, and shipping requirements have been specified. Quality Control is responsible for sur veillance of handling, storage, and shipping activities I
Ins ection, Test, and'''e'r'atih'tatus Equipment or systems not ready for normal service are clearly identified by'se of tags, control logs, and other suitable means to indicate the, status in a positive manner.The identification is sufficient to positively indicate the I status of the particular equipment or system being isolated.The Ginna Station Superintendent.
by suppliers, Rochester Gas and Electric personnel, and contractors.
is responsible for indicating the status of operating equipment or systems to be removed from service for maintenance,.
Ins ection, Test, and'''e'r'atih'tatus Equipment or systems not ready for normal service are clearly identified by'se of tags, control logs, and other suitable means to indicate the, status in a positive manner. The identification is sufficient to positively indicate the I
repair, or modification in accordance with the approved Rochester Gas and Electric Xntra-Station Holding Rules.The Ginna Station Superintendent designates personnel who have station holding authority.
status of the particular equipment or system being isolated.
Personnel who have station holding authority are responsible for directing the status change of equipment and systems in accordance with the approved company Xntra-Station  
The Ginna   Station Superintendent. is responsible for indicating the status of operating equipment or systems to be removed from service for maintenance,. repair, or modification in accordance with the approved Rochester Gas and Electric Xntra-Station Holding Rules.       The Ginna Station Superintendent designates personnel who have station holding authority.
Personnel who have station holding authority are responsible for directing the status change of equipment and systems in accordance with the approved     company Xntra-Station


Holding Rules.System status is indicated through the use of hold'tags and control logs.Equipment or system inspection and test, status are indi-cated by use of test tags, labels, or work inspection and test status sheets.Written procedures control the use of hold tags, test tags, and labels.The procedures require the recording of the name of th'e person placing and removing the tag.Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.
Holding Rules. System status is indicated through the use of hold'tags and control logs.
Fuel handling operations involving fuel assemblies or other radioactive sources are identified and controlled by the use of tags, stamps, or other suitable means.Plant maintenance, repair, or modification of components, P systems, or structures utilizes a work inspection or test status sheet to indicate acceptance or rejection for a particular component, system, or structure.
Equipment or system inspection and test, status are     indi-cated by use of   test tags, labels, or   work inspection and test status sheets. Written procedures control the use of hold tags, test tags, and labels. The procedures require the recording of the name of th'e person placing and removing the   tag.
Work I inspection or test status sheets are prepared and maintained at a designated control location to indicate the status of work and the completion of required inspections and tests.Quality Control monitors the status change activities V for their compliance to approved procedures and assures I IV-40  
Systems,   components, and equipment which are found   to be unacceptable   during or after testing are clearly identified.
Fuel handling operations involving fuel assemblies       or other radioactive sources are identified and controlled by the use of tags, stamps, or other suitable means.
Plant maintenance, repair, or modification of components, P
systems, or structures utilizes a work inspection or test status sheet to indicate acceptance or rejection for a particular component, system, or structure. Work I
inspection or test status sheets are prepared and maintained at a designated control location to indicate the status of work and the completion of required inspections and tests.
Quality Control monitors the status change activities V
for their compliance to approved procedures and assures I
IV-40


t hat inspection results"are properly logged.Quality Control also establishe the procedures for implementing the work inspection or status sheets during maintenance, repair, and modification.
that  inspection results"are properly logged. Quality Control also establishe the procedures for implementing the work inspection or status sheets during maintenance, repair, and modification.
Nonconformin Material's,'a'rts, and Com onents Procedures are established for the control, evaluation and disposition o f de f icient material, parts, and components.
Nonconformin   Material's,'a'rts, and Com onents Procedures are established for the control, evaluation and disposition o f de ficient material, parts, and components.
Materials, parts, or components which do not conform to drawing or specification requirements are identified with a hold tag and reported on a material deficiency report.Quality Control is resp nsible for issuing material deficiency reports, rec mmending disposition, initiating repair or rework," and inspecting and approving repaired or reworked items.Prior to installation or use, non-conforming items remain in a Quality Control receiving inspection area until approved disposition has been received.After installation or use, nonconforming items are identified until approved disposition has been received.Prior to installation r use, suppliers are notified of all nonconforming items~and reguested to recommend dis-position.Purchasing is responsible for obtaining the recommended disposition from the supplier.Engineering is responsible for reviewing and approving supplier's recommended disposition.
Materials, parts, or components which do not conform to drawing or specification requirements are identified with a hold tag and reported on a material deficiency report.
After installation or use, Engineering is responsible for determining and approving disposition of nonconforming.
Quality Control is resp nsible for issuing material deficiency reports, rec mmending disposition, initiating repair or rework," and inspecting and approving repaired or reworked items. Prior to installation or use, non-conforming items remain in a Quality Control receiving inspection area until approved disposition has been received.
items.
After installation or use, nonconforming items are identified until approved disposition has been received.
i Items are repaired or reworked only in accordance with documented procedures'nd drawings, prepared and ap-proved by Engineering.
Prior to installation   r use, suppliers are notified of all nonconforming items~ and reguested to recommend dis-position. Purchasing is responsible for obtaining the recommended   disposition from the supplier. Engineering is responsible for reviewing and approving supplier's recommended disposition. After installation or use, Engineering is responsible for determining and approving disposition of nonconforming. items.
Quality Control assures that approved procedures and drawings are available for use prior to the repair or rework and reinspects all re-paired or reworked items.The repair or rework must.be 1 verified as acceptable by an inspection of the affected item which is at, least equal to the original inspection method.Items which are accepted for use with a known deficiency are fully documented with the specification requirement, justification for acceptance, and affect of such use.All such items are approved prior to use by the Senior Vice President, Electric and Steam.Quality Control issues monthly material deficiency re-port summaries which are reviewed and analyzed by E Quality Assurance.
Unsatisfactory trends are reported to management by means of the corrective action report.in accordance with Section IV.16.IV.16 Corrective Action Quality Assurance establishes the requirements for identification, review and correction of conditions adverse to quality.Conditions adverse to quality, IV-42


such as, failures, malfunctions, deficiencies, deviations, I defective material and equipment, and nonconformances are reported on a corrective action report.Conditions adverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high/maintenance items, and operating procedure deficiencies.
i Items are repaired or reworked only    in accordance with documented  procedures'nd drawings, prepared and ap-proved by Engineering. Quality Control assures that approved procedures and drawings are available for use prior to the repair or rework and reinspects all re-paired or reworked items. The repair or rework must. be 1
The corrective action report identifies the condition, the cause of the condition, and the corrective action taken.Corrective action reports may be initiated by Quality Assurance, Engineexing, Ginna.Station, or Purchasing staff personnel.
verified as acceptable by an inspection of the affected item which is at, least equal to the original inspection method.
Corrective'action reports initiated at Ginna Station are submitted to Quality Control for review and subsequent processing.
Items which are accepted  for use  with a known deficiency are fully documented with the specification requirement, justification for acceptance, and affect of such use.
Corrective action reports initiated by Engineering and Purchasing are reviewed and processed by Quality Assurance.
All such items are approved prior to use by the Senior Vice President, Electric and Steam.
When a condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect of continuing the activity.If continuing the activity would cover up and preclude identification and coxrection of the deficiencyi continuing the-activity would increase the ext'ent of the deficiency or lead to an unsafe condition, stop work action is taken.The Ginna Station Quality Control Engineer has authority to stop work on maintenance, repair, refueling, or modification deficiencies.
Quality Control issues monthly material deficiency re-port summaries which are reviewed and analyzed by E
The Ginna Station Quality  
Quality Assurance. Unsatisfactory trends are reported to management by means of the corrective action report.
in accordance with Section IV.16.
IV.16    Corrective Action Quality Assurance establishes the requirements for identification, review and correction of conditions adverse to quality. Conditions adverse to quality, IV-42
 
such as,   failures, malfunctions, I
deficiencies, deviations, defective material and equipment, and nonconformances are reported on a corrective action report. Conditions adverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high
                                                          /
maintenance items, and operating procedure deficiencies.
The corrective action report identifies the condition, the cause of the condition, and the corrective action taken.
Corrective action reports   may be initiated by Quality Assurance,   Engineexing, Ginna .Station, or Purchasing staff personnel. Corrective'action reports initiated at Ginna Station are submitted to Quality Control for review and subsequent processing. Corrective action reports initiated by Engineering and Purchasing are reviewed and processed by Quality Assurance.
When a condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect of continuing the activity. If continuing the activity would cover up and preclude identification and coxrection of the deficiencyi continuing the-activity would increase the ext'ent of the deficiency or lead to an unsafe condition, stop work action is taken. The Ginna Station Quality Control Engineer has authority to stop work on maintenance, repair, refueling, or modification deficiencies. The Ginna Station Quality


Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.
Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.
The Plant Operations Review Committee'eviews all corrective action reports initiated at Ginna Station and recommends interim corrective action if the action does not, represent a change in configuration of the deficient item.The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating procedures.
The Plant Operations Review Committee'eviews all corrective action reports initiated at Ginna Station and recommends interim corrective action   if the action does not, represent a change in configuration of the deficient item. The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating procedures.
Conditions adverse to quality which involve design deficiencies or a recommended corrective action which involves a design change are reviewed by Engineering.
Conditions adverse to quality which involve design deficiencies or a recommended corrective action which involves a design change are reviewed by Engineering. Engineering determines the cause of the condition and recommends corrective action to preclude repetition.
Engineering determines the cause of the condition and recommends corrective action.to preclude repetition.
Quality Assurance reviews all corrective action reports to assure that the cause of the condition has been determined and that corrective action has been taken to preclude repetition. Quality Assurance also reviews material defi-ciency report summaries for unsatisfactory trends and initiates a corrective action report   if such a trend occurs.
Quality Assurance reviews all corrective action reports to assure that the cause of the condition has been determined and that corrective action has been taken to preclude repetition.
Completed   corrective action reports are submitted to the Senior Vice President, Electric and Steam to keep him aware of significant conditions adverse to quality.
Quality Assurance also reviews material defi-ciency report summaries for unsatisfactory trends and initiates a corrective action report if such a trend occurs.Completed corrective action reports are submitted to the Senior Vice President, Electric and Steam to keep him aware of significant conditions adverse to quality.IV-44  
IV-44


IV.17 Qualit Assurance Records Quality Assurance is responsible for establishing the basic requirements for quality assurance record retention and maintenance.
IV.17 Qualit Assurance Records Quality Assurance is responsible for establishing the basic requirements for quality assurance record retention and maintenance. The Ginna Station Superintendent is responsible for the retention and maintenance of plant'ecords.
The Ginna Station Superintendent is responsible for the retention and maintenance of plant'ecords.
Records of Engineering and Quality Assurance activities are retained and maintained by Engineering.
Records of Engineering and Quality Assurance activities are retained and maintained by Engineering.
Purchasing is responsible for maintaining Purchasing records.Each organization is responsible for preparation, review, approval, and implementation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements.
Purchasing is responsible for maintaining Purchasing records. Each organization is responsible for preparation, review, approval, and implementation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements. The records which J                   I fall within quality assurance record requirements include those records required by Section 6.5, Technical Specifica-
The records which J I fall within quality assurance record requirements include those records required by Section 6.5, Technical Specifica-
      =tions, the quality assurance program, and procurement docu-ments. All documents and records associated with the operation, maintenance,     repair, refueling, and modification of structures, systems     and components covered by the quality assurance program are included.
=tions, the quality assurance program, and procurement docu-ments.All documents and records associated with the operation, maintenance, repair, refueling, and modification of structures, systems and components covered by the quality assurance program are included.Plant records include operating logs;the results of inspections, tests, audits, and the monitoring of plant activities; drawings, specifications, procurement documents and material analyses;calibration procedures and reports;and nonforming and corrective action reports.Records of the qualification of personnel, procedures, and equipment IV-45 I
Plant records include operating logs; the results of inspections, tests, audits, and the monitoring of plant activities;   drawings, specifications, procurement documents and material analyses; calibration procedures and reports; and nonforming and   corrective action reports. Records of the qualification of personnel, procedures, and equipment IV-45
for special processes and the results of reviews are maintained by Engineering.
Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity., results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record.of any nonconformances.
The requirements and responsibilities for record accessa-bility and transmittal are in accordance with document control procedures as described in Section IV.6.Require-ments and responsibilities for preparation, inspection, identification, review, storage, retrieval, maintenance, and the retention of quality assurance records are in accordance with applicable quality assurance record pro-cedures, codes, standards, and procurement documents..
Records are available to authorized personnel.
Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible document control activity.Records are stored in record storage facilities which are designed to prevent, destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept


in two separate storage locations in separate buildings which are physically isolated from each other.Record keeping procedures provide for receiving, clas-sifying, indexing, labeling, and preparing records for storage.'The procedures establish retention require-ments, accessability, control of obsolete record destruction, and control for issuance and return of all records.The Ginna Station Superintendent is responsible for maintaining plant operating records as required in Section 6.5, Technical Specifications.
I for special  processes  and the results of reviews are maintained by Engineering.
The Vice Pres'ident and Chief Engineer is responsible for maintaining design records, such as specifications,'rawings, design review reports, and design control documentation.
Inspection  and test records contain    a description of the type of test or inspection activity, evidence of completion of the activity., results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a  record .of any nonconformances.
The Quality Assurance Coordinator is responsible for lI maintaining records of quality assurance activities, such as audit reports and vendor surveillance reports.IV.18 Audits Compliance with all aspects of the quality assurance program and the effectiveness of the program is-de-termined by audits of all organizations performing IV-47
The requirements    and responsibilities for record accessa-bility and transmittal are in accordance with document control procedures as described in Section IV.6. Require-ments and responsibilities for preparation, inspection, identification, review, storage, retrieval, maintenance, and the retention of quality assurance records are in accordance with applicable quality assurance record pro-cedures,  codes, standards,   and procurement documents..
Records are  available to authorized personnel. Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible document control activity.
Records are stored    in record storage facilities which are designed to prevent, destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept


quality affecting activities.
in two separate  storage locations in separate buildings which are physically isolated from each other.
Quality Assurance is re-sponsible for conducting audits of each organization'nvolved in the quality assurance program on a planned periodic basis.Audit intervals are based on the status and safety importance of activities being performed.
Record keeping procedures        provide for receiving, clas-sifying, indexing, labeling, and preparing records for storage.   'The procedures       establish retention require-ments, accessability, control of obsolete record destruction, and control for issuance and return of all records.
Audits of Ginna Station, Engineering and Purchasing organizations are performed annually.Table IV.18-1 is a list of the activities to be audited in each of the organizations.
The Ginna  Station Superintendent is responsible for maintaining plant operating records as required in Section 6.5, Technical Specifications.
Audit frequencies are based on the level of activity in each area.Audit schedules are established to assure that each activity is audited at least annually.Additional audits are conducted as required by special conditions or circumstances.
The Vice Pres'ident    and     Chief Engineer is responsible for maintaining design records, such as          specifications,'rawings, design review reports, and design control documentation.
Each audit requires the development of an audit plan to provide information about the audit, such as the func-tional areas to be audited, the names and assignments of those who will perform the audit, the scheduling arrangements, and the method of reporting findings and recommendations.
The  Quality Assurance Coordinator is responsible for lI maintaining records of quality assurance activities, such as audit reports and vendor surveillance reports.
The audits are performed in accordance with written procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.Audit results are documented and reported to the person having supervisory responsibility in the area audited, the Senior Vice President, Electric and Steam, and the II IV-48 0
IV.18 Audits Compliance  with  all  aspects of the quality assurance program and the effectiveness        of the program is              -de-termined by audits of        all organizations performing IV-47
Nuclear Safety Audit and Review Board.Within a specified period of time, the person having supervisory responsibility in the area audited is required to review the audit.results, take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.Quality Assurance is responsible for developing audit plans and audit check lists, designating and training audit personnel, and conducting audits..Audits may be conducted by Quality Assurance engineers or other qualified personnel,,such as technical specialists from other company departments and outside consultants.
Audits of major contractors, subcontractors, and sup-pliers are conducted during the early stages of design and procurement, as required, to evaluate their quality assurance program for compliance with all aspects of the procurement documents.
Audits are conducted, as re-quired, to assure that major contractors, subcontractors, and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents.
During the project, additional audits are performed, as required, to assure all quality assurance program requirements are properly implemented in accordance with procurement documents.
IV-49


The Quality Assurance Coordinator will perform regular analyses of audit results to eval'uate quality trends.Results of these analyses will be provided to management for their regular review.IV-50
quality affecting activities. Quality Assurance is re-sponsible for conducting audits of each    organization'nvolved in the quality assurance program on a planned periodic basis. Audit intervals are based on the status and safety importance of activities being performed.
Audits of Ginna Station, Engineering and Purchasing organizations are performed annually. Table IV.18-1 is a list of the activities to be audited in each of the organizations. Audit frequencies are based on the level of activity in each area. Audit schedules are established to assure that each activity is audited at least annually.
Additional audits are conducted as required by special conditions or circumstances.
Each  audit requires the development of an audit plan to provide information about the audit, such as the func-tional areas to be audited, the names and assignments of those who will perform the audit, the scheduling arrangements, and the method of reporting findings and recommendations.      The audits are performed in accordance with written procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.
Audit results are documented and reported to the person having supervisory responsibility in the area audited, the Senior Vice President, Electric and Steam, and the II IV-48


Table IV.l-l Quality Assurance.
0 Nuclear Safety Audit and Review Board.     Within  a  specified period of time, the person having supervisory responsibility in the area audited is required to review the audit .results, take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.
Program Procedures Subject Listing Qualit Assurance Procedures Appendix B Criteria Qualit Assurance Grou Im lementation of Qualit Assurance Pro ram The purpose of this procedure is to establish the Quality Assurance Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant.The manual is estab-.lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.Trainin of Qualit Assurance Personnel To establish an education program for personnel whose work has an effect on the quality program.The edu-cation program described by this procedure is concerned with informing personnel of quality operations and does not include training of personnel in technical skills.Mana ement Review of Qualit Assurance Pro ram This procedure describes how management reviews of the quality assurance program are conducted.
Quality Assurance is responsible for developing audit plans and audit check lists, designating and training audit personnel, and conducting audits..
This includes how management level audits are conducted, what reports
Audits may be conducted by Quality Assurance engineers or other qualified personnel,,such as technical specialists from other company departments and outside consultants.
Audits of major contractors, subcontractors, and sup-pliers are conducted during the early stages of design and procurement, as required, to evaluate their quality assurance  program for compliance with  all aspects of the procurement documents.     Audits are conducted, as re-quired, to assure that major contractors, subcontractors, and suppliers are auditing their    suppliers'uality assurance  programs  in accordance with procurement documents. During the project, additional audits are performed, as required, to assure    all quality assurance program requirements    are properly implemented in accordance with procurement documents.
IV-49


Table IV.1-1 (cont'd.)Qualit Assurance Procedures (cont'd.)Appendix B Criteria are submitted-to management for review, and how manage-ment comments are incorporated into the program.Qualit Assurance Grou Or anization and Res onsibilities This procedure describes the Quality Assurance Organ-ization and its responsibilities for establishing and executing a quality assurance program to assure that the Rochester Gas and Electric nuclear facilities are operated in conformance to lOCFR 50, Appendix B requirements.
The Quality Assurance Coordinator will perform regular analyses of audit results to eval'uate quality trends.
Modification of Structures, S stems and Com onents Covered B the Quaint Assurance Pro ram III This procedure defines the method followed to perform modifications to safety related structures, systems and components.
Results of these analyses will be provided to management for their regular review.
Review of En ineerin Documents This procedure defines the requirements for Quality Assurance review of design criteria and specifications to assure that appropriate quality requirements are included.III
IV-50


Table IV.l-l (cont'd.)Qualit Assurance Procedures (cont'd.)Appendix B Criteria Procurement of Material, E ui ment, and Services Covered B The Qualit Assurance Pro ram IV This procedure describes the requirements to be met in the procurement of safety related parts, components, materials, structures, systems, and services.Review of Purchase Re uisitions IV To define the procedure for controlling the quality of supplier and subcontractor furnished materials, com-ponents, parts, and services.Re uirements for Su lier Qualit Assurance Programs IV This procedure establishes the requirements for the quality assurance program which must be in existance at a supplier's facility.Re uirements for Qualit Assurance Manual and Procedures The purpose of this procedure is to establish the quality and safety related procedures which are required to implement the Rochester Gas and Electric Quality Assurance Manual.It defines the require-ments for instructions, procedures and drawings,  
Table IV.l-l Quality Assurance. Program Procedures Subject Listing Qualit Assurance Procedures           Appendix B Criteria Qualit Assurance  Grou  Im  lementation of Qualit Assurance Pro ram The purpose  of this procedure is to establish the Quality Assurance Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is estab-.
lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.
Trainin of Qualit Assurance Personnel To establish an education program for personnel whose work has an effect on the quality program. The edu-cation program described by this procedure is concerned with informing personnel of quality operations and does not include training of personnel in technical skills.
Mana ement Review of Qualit Assurance Pro ram This procedure describes how management reviews of the quality assurance program are conducted. This includes how management level audits are conducted, what reports


Table IV.l-l (cont'd.)Qualit Assurance Procedures (cont'd.)Appendix B Criteria defines the responsibilities for preparing procedures for each involved department, establishes the inter-faces between the various sections of the several procedures manuals, and provides directions for the preparation of quality assurance procedures and instructions.
Table IV.1-1 (cont'd.)
Qualit Assurance Procedures V The purpose of this procedure is to establish the requirements for Quality Assurance procedures needed to implement the Rochester Gas and Electric Quality Assurance'Manual.
Qualit Assurance Procedures   (cont'd.)       Appendix B Criteria are submitted-to management for review, and how manage-ment comments are incorporated into the program.
It defines the responsibilities for preparing the Quality Assurance procedures manual, establishes the interfaces between sections of the manual and the manuals of other departments, and provides direction for the preparation of the Quality Assurance procedures.
Qualit Assurance   Grou  Or anization and Res onsibilities This procedure describes the Quality Assurance Organ-ization and its responsibilities for establishing and executing a quality assurance program to assure that the Rochester Gas and Electric nuclear facilities are operated in conformance to 10CFR 50, Appendix B requirements.
Review of Qualit Control, En ineerin and Pure assn Procedures The purpose of this procedure is to establish the requirements for the review and approval of all quality and safety related documents generated by the Rochester Gas and Electric Company in accordance with the requirements of the Rochester Gas and Electric Quality Assurance Manual.  
Modification of Structures,    S stems and Com onents          III Covered  B  the Quaint    Assurance Pro ram This procedure defines the method followed to perform modifications to safety related structures, systems and components.
Review of En ineerin   Documents This procedure defines the requirements for Quality            III Assurance review of design criteria and specifications to assure that appropriate quality requirements are included.


Table IV.l-l (cont'd.)Qualit Assurance Procedures (cont'd.)Appendix B Criteria Document Issuance, Control and Distribution This procedure defines the requirements for the identification, issuance, revision, distribution, and storage of all documents related to safety related structures, systems, and components controlled by the Rochester Gas and Electric Quality Assurance Manual.Qualification of Su liers This procedure describes the requirements for quali-fying suppliers and maintaining an approved suppliers list.Evaluation of Su lier Qualit Assurance Pro rams VII This procedure establishes the requirements for the evaluation of the quality assurance program con-trolling the operations of suppliers of safety related parts, materials, components, structures, or systems to the Rochester Gas and Electric Corporation.
Table   IV.l-l (cont'd.)
Control of Purchased Material, E ui ment and Services the Qualit Assurance Pro ram VIII This procedure describes the method used to control material and services through the procurement cycle from the time of placing the order until the material is placed'in stock or released for use or until the service contracted for has been completed.
Qualit Assurance Procedures     (cont'd.)     Appendix B Criteria Procurement  of Material,  E  ui ment, and Services Covered    IV B  The Qualit Assurance  Pro ram This procedure describes the requirements to be met in the procurement of safety related parts, components, materials, structures, systems, and services.
Review of Purchase Re uisitions                                IV To define the procedure for controlling the quality of supplier and subcontractor furnished materials, com-ponents, parts, and services.
Re uirements for Su   lier Qualit Assurance Programs          IV This procedure establishes the requirements for the quality assurance program which must be in existance at a supplier's facility.
Re uirements for Qualit Assurance Manual and Procedures The purpose  of this procedure is to establish the quality and  safety related procedures which are required to implement the Rochester Gas and Electric Quality Assurance Manual. It defines the require-ments for instructions, procedures and drawings,


Table IV.l-l (cont'd.)Qualit Assurance Procedures (cont'd.)Appendix B Criteria Weldin Procedures IX The purpose of this procedure is to identify the process by which welding procedures shall be designed.Weldin Procedure Qualification IX The purpose of this procedure is to identify the process by which welding procedures shall be qualified.
Table IV.l-l (cont'd.)
Welder Qualification IX The purpose of this procedure is to identify the process by which individual welders shall be qualified.
Qualit Assurance Procedures     (cont'd.) Appendix B Criteria defines the responsibilities for preparing procedures for each involved department, establishes the inter-faces between the various sections of the several procedures manuals, and provides directions for the preparation of quality assurance procedures and instructions.
Nondestructive Examination Procedures IX The purpose of this procedure is to outline the program-by which nondestructive examination procedures shall be developed.
Qualit Assurance Procedures                                V The purpose of this procedure is to establish the requirements for Quality Assurance procedures needed to implement the Rochester Gas and Electric Quality Assurance'Manual. It defines the responsibilities for preparing the Quality Assurance procedures manual, establishes the interfaces between sections of the manual and the manuals of other departments, and provides direction for the preparation of the Quality Assurance procedures.
Nondestructive Examination Procedure Qualification IX The purpose of this procedure is to outline the program by which nondestructive examination (NDE)procedures shall be qualified and approved.  
Review of Qualit Control, En ineerin      and Pure assn  Procedures The purpose   of this procedure is to establish the requirements for the review and approval of all quality and safety related documents generated by the Rochester Gas and Electric Company in accordance with the requirements of the Rochester Gas and Electric Quality Assurance Manual.


Table IU.1-1 (cont'd.)Qualit Assurance Procedures
Table  IV.l-l (cont'd.)
{cont'd.)Appendix B Criteria Heat Treatin Procedures The purpose of this procedure is to define how heat treating procedures shall be established and implemented.
Qualit Assurance Procedures      (cont'd.) Appendix  B Criteria Document Issuance,    Control and Distribution This procedure defines the requirements for the identification, issuance, revision, distribution, and storage of all documents related to safety related structures, systems, and components controlled by the Rochester  Gas and  Electric Quality  Assurance Manual.
Test, Pro ram Re uirements XI This procedure defines the requirements for control of the nuclear plant test progzam.The test program shall.include, but not be limited to surveillance testing, special tests, post maintenance testing, physics testing, testing following modification or significant changes in operating procedures, and any evaluation or qualification testing required for new designs.Material Deficienc Re ortin S stem This procedure establishes the methods for handling and control of non-conformant material and the docu-mentation of non-conformances of all safety related materials, parts, and components to meet the require-ments of the Rochester Gas and Electric Quality Assurance Manual.Dis osition of Discre ant Material This procedure defines the categories of non-conforming or discrepant material and describes the handling and  
Qualification of  Su  liers This procedure describes the requirements for quali-fying suppliers and maintaining an approved suppliers list.
Evaluation of  Su  lier  Qualit Assurance Pro rams        VII This procedure establishes the requirements for the evaluation of the quality assurance program con-trolling the operations of suppliers of safety related parts, materials, components, structures, or systems to the Rochester Gas and Electric Corporation.
Control of Purchased Material, E ui ment and Services      VIII the Qualit Assurance Pro ram This procedure describes the method used to control material and services through the procurement cycle from the time of placing the order until the material is placed 'in stock or released for use or until the service contracted for has been completed.
 
Table  IV.l-l (cont'd.)
Qualit Assurance Procedures    (cont'd.)      Appendix  B Criteria Weldin  Procedures                                            IX The purpose  of this procedure is to identify the process by which welding procedures  shall be designed.
Weldin Procedure Qualification                                IX The purpose of this procedure is to identify the process by which welding procedures shall be qualified.
Welder Qualification                                          IX The purpose of this procedure is to identify the process by which individual welders shall be qualified.
Nondestructive Examination Procedures                          IX The purpose  of this procedure is to outline the program-by which nondestructive examination procedures    shall be developed.
Nondestructive Examination Procedure Qualification            IX The purpose  of this procedure is to outline the program by which nondestructive examination    (NDE)  procedures shall be qualified and approved.
 
Table IU.1-1 (cont'd.)
Qualit Assurance Procedures   {cont'd.)     Appendix B Criteria Heat Treatin   Procedures The purpose of this procedure is to define how heat treating procedures shall be established and implemented.
Test, Pro ram Re uirements                                   XI This procedure defines the requirements for control of the nuclear plant test progzam. The test program shall. include, but not be limited to surveillance testing, special tests, post maintenance testing, physics testing, testing following modification or significant changes in operating procedures, and any evaluation or qualification testing required for new designs.
Material Deficienc Re ortin S stem This procedure establishes the methods for handling and control of non-conformant material and the docu-mentation of non-conformances of all safety related materials, parts, and components to meet the require-ments of the Rochester Gas and Electric Quality Assurance Manual.
Dis osition of Discre ant Material This procedure defines the categories of non-conforming or discrepant material and describes the handling and


Table IV.l-l (cont'd..)
Table IV.l-l (cont'd..)
Qualit Assurance Procedures (cont'd.)Appendix B Criteria control of each category from the time of identification until disposition is complete.Qualit Control Deficienc Re ortin S stem XVI This procedure establishes the method required to detect, identify, analyze, review, and.correct conditions which adversely affect quality or safety and to preclude repetition of the deficiency.
Qualit Assurance Procedures     (cont'd.)   Appendix B Criteria control of each category from the time of identification until disposition is complete.
Records XVII This procedure defines the requirements for the storage of all records related to safety related, structures, systems, and components controlled by Rochester Gas and Electric Quality Assurance Manual.Performance of Qualit Assurance Audits XVIII This procedure provides the instructions for imple-mentation of audits scheduled and planned in accordance with procedure QAl802 including preparation performance, reporting, and followup.  
Qualit Control Deficienc Re ortin S stem                     XVI This procedure establishes the method required to detect, identify, analyze, review, and. correct conditions which adversely affect quality or safety and to preclude repetition of the deficiency.
Records                                                   XVII This procedure defines the requirements for the storage of all records related to safety related, structures, systems, and components controlled by Rochester Gas and Electric Quality Assurance Manual.
Performance of Qualit Assurance Audits                       XVIII This procedure provides the instructions for imple-mentation of audits scheduled and planned in accordance with procedure QAl802 including preparation performance, reporting, and followup.
 
Table IV.l-l (cont'd.)
Qualit Control Procedures        Appendix  B Criteria Ginna Q.A. Pro ram Im lementation This procedure establishes the guidelines for the im-plementation of the Quality Assurance Program at Ginna  Station.
Trainin of Ginna Personnel To provide instructions regarding the indoctrination and  training of  Ginna Personnel about the Ginna Quality  Assurance  Program and implementing QC procedures.
Ginna  Qualit Control Or anization To describe the organization responsible for imple-menting the requirements of the Quality Assurance requirements at Ginna Station.
Work Start Authorization To provide instructions which ensure that necessary preparation for plant modifications are complete prior to the start of work.
Procurement of Nuclear Materials, Parts,                  IV and Com onents To  provide an outline for processing of orders for nuclear material, parts, and components, at Ginna


Table IV.l-l (cont'd.)Qualit Control Procedures Ginna Q.A.Pro ram Im lementation Appendix B Criteria This procedure establishes the guidelines for the im-plementation of the Quality Assurance Program at Ginna Station.Trainin of Ginna Personnel To provide instructions regarding the indoctrination and training of Ginna Personnel about the Ginna Quality Assurance Program and implementing QC procedures.
I Table IV.,l-l .(cont'd.)
Ginna Qualit Control Or anization To describe the organization responsible for imple-menting the requirements of the Quality Assurance requirements at Ginna Station.Work Start Authorization To provide instructions which ensure that necessary preparation for plant modifications are complete prior to the start of work.Procurement of Nuclear Materials, Parts, and Com onents IV To provide an outline for processing of orders for nuclear material, parts, and components, at Ginna I
Qualit Control Procedures     (cont'd.)       Appendix B Criteria Station,   and to assure that regulatory requirements, design bases,   and other requirements necessary to ensure adequate quality are suitably included and referenced in the procurement documents.
Table IV.,l-l.(cont'd.)
Review, A royal, Notification, and Transmittal         of         IV Su lier Desi n and QA QC Re uirements To provide written instruction for outlining the steps necessary   for review, approval, notification, and transmittal of supplier procedures, design .drawings, or any other requirements as specified in .the procurement documents for nuclear material; parts, or components ordered for spare parts or maintenance purposes by plant personnel.
Qualit Control Procedures (cont'd.)Appendix B Criteria Station, and to assure that regulatory requirements, design bases, and other requirements necessary to ensure adequate quality are suitably included and referenced in the procurement documents.
Plant Qualit Control Procedures To describe the intent, scope, and format of the plant quality control procedures.
Review, A royal, Notification, and Transmittal of Su lier Desi n and QA QC Re uirements IV To provide written instruction for outlining the steps necessary for review, approval, notification, and transmittal of supplier procedures, design.drawings, or any other requirements as specified in.the procurement documents for nuclear material;parts, or components ordered for spare parts or maintenance purposes by plant personnel.
Procedures for Performin     Routine Maintenance,   Re   air, or Mode xcatzon To outline procedure requirements for routine main-tenance, repair, or modification activities on safety class A and B systems, equipment, or structures.
Plant Qualit Control Procedures To describe the intent, scope, and format of the plant quality control procedures.
 
Procedures for Performin Routine Maintenance, Re air, or Mode xcatzon To outline procedure requirements for routine main-tenance, repair, or modification activities on safety class A and B systems, equipment, or structures.  
Table  IV.l-l (cont'd.)
Qualit Control Procedures    (cont'd.)    Appendix B Criteria Plant  0 eratin Procedures To outline Quality Assurance requirements to be in-cluded in plant operating procedures which are used to direct operating, test, and refueling activities on safety Class A and B structures, systems, or equipment.
Issuance Control of Procedures Used For the 0 eration      VI of the Plant This procedure establishes the method by which pro-cedures and check off lists used in the operation of the plant are to be controlled.
Document Control for Procedure Chan es                      VI This procedure describes the method by which procedures described in reference 2.3 to be revised shall be controlled.
Document  Control at Ginna                                  VI To  define those non-procurement documents requiring control at Ginna and the method by which they shall be controlled.
Drawin Chan es at Ginna                                    VI To define the responsibilities and to provide in-structions for ensuring that existing piping and


Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Appendix B Criteria Plant 0 eratin Procedures To outline Quality Assurance requirements to be in-cluded in plant operating procedures which are used to direct operating, test, and refueling activities on safety Class A and B structures, systems, or equipment.
Table ZV.l-l .(cont'd.)
Issuance Control of Procedures Used For the 0 eration of the Plant VI This procedure establishes the method by which pro-cedures and check off lists used in the operation of the plant are to be controlled.
Qualit Control Procedures   (cont'd.)     Appendix B Criteria circuit. drawings are kept current and updated to always reflect the "As built" condition of the plant following modifications to systems and equipment.
Document Control for Procedure Chan es VI This procedure describes the method by which procedures described in reference 2.3 to be revised shall be controlled.
Receivin Ins ection of Purchased Material                    VZI To define the activities and responsibilitie's necessary for properly receiving nuclear materials and in-specting them prior to acceptance for use.
Document Control at Ginna VI To define those non-procurement documents requiring control at Ginna and the method by which they shall be controlled.
Control of Purchased Material, E ui ment, and Services      VIII To outline the program for control of material, equip-ment, and services purchased through contractors.
Drawin Chan es at Ginna VI To define the responsibilities and to provide in-structions for ensuring that existing piping and  
Control of Materials, Parts, and  Com onents                VIII To establish the system for effective control of material, parts, or components from receipt at Ginna through installation or use.
Identification and Markin of Material                      VZZZ To establish an outline for identification and mark-ing of material to maintain quality and traceability through the life of the material.
4


Table ZV.l-l.(cont'd.)
av Table IV.l-l (cont,'d.).
Qualit Control Procedures (cont'd.)Appendix B Criteria circuit.drawings are kept current and updated to always reflect the"As built" condition of the plant following modifications to systems and equipment.
Qualit Control Procedures     (cont'd.)   Appendix B Criteria Control of Weldin                                           IX The purpose of this procedure is to establish the pro-gram for effective control of qualified personnel and procedures pertaining to welding.
Receivin Ins ection of Purchased Material VZI To define the activities and responsibilitie's necessary for properly receiving nuclear materials and in-specting them prior to acceptance for use.Control of Purchased Material, E ui ment, and Services VIII To outline the program for control of material, equip-ment, and services purchased through contractors.
Issue, Control, and Stora e of Weld Consumables           IX To provide instructions for issue, control, and storage of weld consumables.
Control of Materials, Parts, and Com onents VIII To establish the system for effective control of material, parts, or components from receipt at Ginna through installation or use.Identification and Markin of Material VZZZ To establish an outline for identification and mark-ing of material to maintain quality and traceability through the life of the material.4 av Table IV.l-l (cont,'d.).
Welding E ui ment Performance Verification                 IX To outline the program for periodic performance verification of equipment used on special processes.
Qualit Control Procedures (cont'd.)Appendix B Criteria Control of Weldin IX The purpose of this procedure is to establish the pro-gram for effective control of qualified personnel and procedures pertaining to welding.Issue, Control, and Stora e of Weld Consumables IX To provide instructions for issue, control, and storage of weld consumables.
Welding E ui ment Performance Verification IX To outline the program for periodic performance verification of equipment used on special processes.
Ins ection Activities at Ginna To establish guide lines for the activities requir-ing inspectors, source of inspectors, and qualifi-cations of inspectors.
Ins ection Activities at Ginna To establish guide lines for the activities requir-ing inspectors, source of inspectors, and qualifi-cations of inspectors.
Ins ector Qualification and Res onsibilities X To establish requirements for those designated to perform inspection activities at Ginna.  
Ins ector Qualification and Res onsibilities               X To establish requirements for those designated to perform inspection activities at Ginna.
 
Table  IV.l-l .(cont'd.)
Qualit Control Procedures      (cont'd.)  Appendix B Criteria Test Procedure  Re  uirements                                XI To  outline requirements for the procedures which are performed to verify the correct operability of safety related equipment or structures.
Performance  of Tests                                        XI To  establish requirements for performing tests to include, but not be limited to, surveillance testing, special tests, post maintenance testing, physics testing, and testing following modification or sig-nificant changes in operating procedures.
Documentation, Evaluation and Dis osition of                XI Test Results To  describe the requirements for accumulating, documenting, evaluating, and dispositioning of results of  all tests.
Test Personnel  Re uirements                                XI To  establish requirements for personnel designated to perform and/or assist in the conductance of tests.
Calibration and Control of Test Instruments Used For        XII Calx. ration To provide guidelines for    test instrument calibration and control which satisfy    the requirements of the
 
Table IV.l-l (cont'd.)
Qualit Control Procedures    (cont'd.)  Appendix B Criteria Quality Assurance Manual.
Calibration and Control of Maintenance Measurin            XII Tools and  E uz. ment To provide guidelines for calibration and control of measuring tools and equipment used by maintenance 'to perform critical maintenance measurement.
Calibration  and  Control of Qualit Control              XII Measurin    Tools To outline calibration and control instructions for inspection measuring tools used by quality control to determine the reject or accept status of parts and components.
Handlin  , Stora e, and Shi  in                        XIII To  outline the plan for control of handling, storage, shipping, 'and preservation of material to prevent damage, deterioration, or loss from on-site delivery through  installation.
Material Handlin E ui ment                                XIII To outline the requirements for ensuring that material handling equipment remains in good condition.
 
Table  IV.l-l .(cont'd.)
Qualit Control Procedures    (cont'd.)  Appendix  B Criteria Work, Ins  ection, Test Status Control as Related to        XIV Maintenance,  Re air, Modification, or Refuelin To establish work inspection or test status sheets .for indicating the inspection and test status of components and systems involved in maintenance, repair, or modification.
S stems or E ui ment 0 eratin    and Test Status            XIV Control Indicators To define the system for indicating the operating status of structures, systems, and components to pre-vent their inadvertent operation during maintenance, repair, modification, or test.
Control and Dis osition of Deficient Materials To outline the necessary steps for effective control and disposition of non-conforming materials, parts, and components.
Issue of Material Deficienc  Re  orts To establish an  outline for issuing and processing Material Deficiency Reports.
 
Table  IV.l-l '(cont'd.)
Qualit Control Procedures      (cont'd.) Appendix  B Criteria Qualit Deficiencies and Corrective Action To provide instructions for identifying, reporting, and correcting conditions adverse to quality.
Control of Qualit Assurance Records at. Ginna            XVII To outline the procedure for control of records and documents to be retained.
Processin of New Records                                  XVII To detail the processing steps required of new records from their receipt in Central Records until final placement in their storage location.
Record Stora e Facilit and E ui ment                      XVII To provide a description of the record storage facilities  and equipment  requirements.
Routine Surveillance                                      XVIII To  provide instructions for Quality Control Sur-veillance of plant activities covered by the quality assurance  program.
Correction of Audit Deficiencies                          XVIII To  provide instructions to be used for correcting audit deficiencies at Ginna.
 
Table  IV.l-l (cont'd.)
En ineerin Procedures                  A ppendix B Criteria En  ineerin  Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Engineering Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is. estab-lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and  Electric Quality  Assurance Manual.
Trainincl This procedure explains the requirements for the training of engineering personnel in the use of the Engineering Procedures Manual.
En  ineerin  De  artment Or anization and  Res onsibilities This procedure describes the Engineering Department Organization and defines its responsibilities for the design of safety related components, structures and systems.
Desi n  Criteria This procedure defines the criteria to be considered in the design of modifications to a nuclear plant.
 
I Table IV.l-l (cont'd.)
En  ineerin Procedures    (cont'd.)    Appendix B Criteria Zt establishes the requirements for documentation and review of these criteria.
Desi n Anal sis    &  Calculations                          IZZ This procedure defines the requirements for controlling the prepaiation and documentation of design analyses and  calculations.
En  ineerin Drawin    s                                    ZII This procedure establishes      the requirements for the preparation  and  revision of Engineering Drawings.
En  ineerin  S ecifications This procedure defines the requirement for specifi-cations and requirements documents needed to assure that all safety related structures, components, and systems are purchased, constructed, inspected and tested in accordance with applicable codes and standards and the provisions of 10CFR50, Appendix B.
The procedure establishes the content and format of the documents.
Design Control and Review This procedure defines the      activities required to assure adequate    control of design modifications and the requirements    for design verification and review.
 
Table  IV.l-l (cont'd.)
En ineerin Procedures    (cont'd.)  Appendix  B Criteria Purchase  Re  uisitions                                    IV This procedure describes the actions required of Engineering personnel to purchase material related to quality or safety of a nuclear power plant.
En  ineerin Procedures The purpose of this procedure is to establish the requirements for Engineering instructions, pro-cedures and drawings needed to implement the Rochester Gas and Electric Quality Assurance Manual.
It defines thethe  responsibilities for preparing and approving        Engineering procedures manual, estab-lishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the preparation of the Engineering procedures.
Fabrication    and  Construction  S ecifications This procedure describes the requirements for documentation of the interpretation of engineering drawings and specifications into work instructions to permit plant operations to properly make modi-fications to the nuclear plant.
 
I' Table  IV.l-l (cont'd.)
En  ineerin Procedures    (cont'd.)    Appendix  B Criteria Control and Issuance of    En  ineering Documents          VI This procedure establishes the requirements for the control and issuance of engineering drawings, specifications, requirements documents, and work in-structions. It  establishes the numbering system, the control of originals, approvals, distribution, and revisions for both Rochester Gas and Electric and supplier originated, drawings.
Su  lier Evaluation                                      VII This procedure defines the requirements for the
,evaluation of a supplier's engineering and manu-facturing organization and his design and production capabilities to be performed prior to subcontracting a safety or quality related effort to a new supplier.
Review  of Test Results                                    XI The purpose of this procedure is to establish the requirements for the review and evaluation of test results to implement the requirements of Section of the Rochester Gas and Electric Quality Assurance ll Manual.
Qualit Control Deficienc Re ortin This procedure establishes the requirements for
 
Table XV.l-l .(cont'd.)
En  ineerin Procedures  (cont'd.)    Appendix B Criteria evaluating and answering Quality Control Deficiency Reports which are related to design deficiencies.
En  ineerin    Records This procedure establishes the-requirements for the storage of all Engineering Department drawings, specifications, requirements documents and supplier documents  for all safety related components, structures,    and systems controlled by the Rochester Gas and  Electric Quality Assurance Manual.
Audit  Re  uirements                                      XVZlZ The purpose    of this procedure is to describe the re-sponsibilities of the Engineering Department before, during, and after an audit.
Purchasin  Procedures Purchasin    Im lementation of the Qualit Pro ram The purpose    of this procedure is to establish the Purchasing Procedures    for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is es-tablished to assure meeting the requirements of
 
I Table  IV.l-l .(cont'd.)
Purchasin    Procedures  (cont'd.)        Appendix B Criteria Title  10 of the Code  of Federal Regulations, Part 50, Appendix B, "Quality Assurance. Criteria for Nuclear Power Plants" and  the requirements of the Rochester Gas and Electric Quality Assurance Manual.
Trainin of Purchasin      Personnel This procedure defines the requirements for the training of Purchasing Department personnel in the use of the Purchasing Procedures Manual.
Purchasin  De artment Or anization and    -Res onsibilities This procedure describes the Purchasing Department organization and its responsibilities for the pro-curement of safety related    materials, components, structures, and systems:
Pre aration, Review, A royal and Issuance      of Purchase Orders and Chan e Orders This procedure establishes the procedure for processing a Purchase Order upon receipt of a Purchase  Requisition.
Purchasin  Procedures The purpose  of this procedure is to establish the requirement  for purchasing instructions and
 
I I'


Table IV.l-l.(cont'd.)
Table IV. 1-1 . (cont '. )
Qualit Control Procedures (cont'd.)Appendix B Criteria Test Procedure Re uirements XI To outline requirements for the procedures which are performed to verify the correct operability of safety related equipment or structures.
Purchasin  Procedures   (cont'd.)       Appendix B Criteria procedures needed to implement the Rochester Gas and Electric Quality Assurance Manual.      It  defines the re-sponsibilities for preparing  and  approving the Pur-chasing Procedures Manual,  establishes    the interfaces between sections of the  manual  and  the  manuals  of other departments and provides    direction  for  the pre-paration of the purchasing procedures.
Performance of Tests XI To establish requirements for performing tests to include, but not be limited to, surveillance testing, special tests, post maintenance testing, physics testing, and testing following modification or sig-nificant changes in operating procedures.
Control and Issuance of Purchasin Procedures                    VI This procedure establishes the methods for the de-velopment, maintenance, control, and issuance of the Purchasing Procedures Manual.
Documentation, Evaluation and Dis osition of Test Results XI To describe the requirements for accumulating, documenting, evaluating, and dispositioning of results of all tests.Test Personnel Re uirements XI To establish requirements for personnel designated to perform and/or assist in the conductance of tests.Calibration and Control of Test Instruments Used For Calx.ration XII To provide guidelines for test instrument calibration and control which satisfy the requirements of the  
Su  lier Qualification,  Surveillance, and Control            VII This procedure describes the requirements for qualifying suppliers, maintaining records of approved suppliers, and evaluating their performance during the manufacturing stage to assure conformance to specification requirements. Suppliers shall be evaluated prior to issuance of a purchase order to insure that they are capable of manufacturing and delivering a product conforming to the applicable purchase  specifications.
Qualified  Su  liers List                                      VII This procedure describes the method to be used for the development and maintenance of the Qualified Suppliers List.


Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Appendix B Criteria Quality Assurance Manual.Calibration and Control of Maintenance Measurin Tools and E uz.ment XII To provide guidelines for calibration and control of measuring tools and equipment used by maintenance
Table IV.l-l (cont'd.)
'to perform critical maintenance measurement.
Purchasin    Procedures (cont'd.)   Appendix B Criteria Material Deficienc  Re  orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.
Calibration and Control of Qualit Control Measurin Tools XII To outline calibration and control instructions for inspection measuring tools used by quality control to determine the reject or accept status of parts and components.
Qualit Control Deficienc      Re ortin This procedure describes the actions to be taken by.
Handlin , Stora e, and Shi in XIII To outline the plan for control of handling, storage, shipping,'and preservation of material to prevent damage, deterioration, or loss from on-site delivery through installation.
the Purchasing Department when supplier deficiencies which require corrective action are discovered.
Material Handlin E ui ment XIII To outline the requirements for ensuring that material handling equipment remains in good condition.  
Purchasin  Records This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.
Audit Re uirements                                      XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.


Table IV.l-l.(cont'd.)
Table IV.l-l (cont'd.)
Qualit Control Procedures (cont'd.)Appendix B Criteria Work, Ins ection, Test Status Control as Related to Maintenance, Re air, Modification, or Refuelin XIV To establish work inspection or test status sheets.for indicating the inspection and test status of components and systems involved in maintenance, repair, or modification.
Purchasin    Pro'cedures (cont'd.)     Appendix B Criteria Material Deficienc  Re  orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.
S stems or E ui ment 0 eratin and Test Status Control Indicators XIV To define the system for indicating the operating status of structures, systems, and components to pre-vent their inadvertent operation during maintenance, repair, modification, or test.Control and Dis osition of Deficient Materials To outline the necessary steps for effective control and disposition of non-conforming materials, parts, and components.
Qualit Control Deficienc      Re  ortin This procedure describes the actions to be taken by.
Issue of Material Deficienc Re orts To establish an outline for issuing and processing Material Deficiency Reports.  
the Purchasing Department when supplier deficiencies which require corrective action are discovered.
Purchasin  Records                                        XVII This procedure establishes the requirements    for the storage of all Purchasing Department records    for safety related components, structures,. and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.
Audit Re uirements                                        XVIII The purpose  of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.


Table IV.l-l'(cont'd.)
TABLE  IV.4-1 Procurement Document  Re uirements Items to be considered  for inclusion in procurement    documents  include:
Qualit Control Procedures (cont'd.)Qualit Deficiencies and Corrective Action Appendix B Criteria To provide instructions for identifying, reporting, and correcting conditions adverse to quality.Control of Qualit Assurance Records at.Ginna XVII To outline the procedure for control of records and documents to be retained.Processin of New Records XVII To detail the processing steps required of new records from their receipt in Central Records until final placement in their storage location.Record Stora e Facilit and E ui ment XVII To provide a description of the record storage facilities and equipment requirements.
: 1. Component  identification.
Routine Surveillance XVIII To provide instructions for Quality Control Sur-veillance of plant activities covered by the quality assurance program.Correction of Audit Deficiencies XVIII To provide instructions to be used for correcting audit deficiencies at Ginna.  
: 2. Component  or system safety class.
4
: 3. Quantitative and qualitative technical    and  function require-ments and  acceptance/rejection criteria.
: 4. Applicable regulatory code and standard requirements.
: 5. Drawings, specifications,    instructions,  and procedures  to be invoked on suppliers.
: 6. Special test and inspection requirements.
: 7. Submittal, approval, and retention requirements for documents l
such as special process and test procedures, quality assurance manuals, materials records, calculations and analyses.
: 8. Applicable 10CFR50, Appendix B quality assurance requirements, such as for document control, control of special processes, and control of sub-contractors work or services.
: 9. Access rights for visits and audits by Rochester Gas and Electric  and  their agents.
: 10. Interface requirements with other organizations; e.g.,
document submitt'al and review requirements     between organizations.
ll. Special requirements or responsibilities for design, procedure preparation, fabrication, cleaning, testing, packaging, handling, shipping, and storing.


Table IV.l-l (cont'd.)En ineerin Procedures A ppendix B Criteria En ineerin Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Engineering Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant.The manual is.estab-lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.Trainincl This procedure explains the requirements for the training of engineering personnel in the use of the Engineering Procedures Manual.En ineerin De artment Or anization and Res onsibilities This procedure describes the Engineering Department Organization and defines its responsibilities for the design of safety related components, structures and systems.Desi n Criteria This procedure defines the criteria to be considered in the design of modifications to a nuclear plant.
TABLE IV.18-1 Audit List E
I Table IV.l-l (cont'd.)En ineerin Procedures (cont'd.)Appendix B Criteria Zt establishes the requirements for documentation and review of these criteria.Desi n Anal sis&Calculations IZZ This procedure defines the requirements for controlling the prepaiation and documentation of design analyses and calculations.
~ Functional Or anization                 Activities Audited Engineering Indoctrination  and Training Design Control Procurement Document Control Document Control Control of Special Processes Records Purchasing Indoctrination  and Training Procurement Document Control Records Ginna Station Indoctrination and Training Modification Maintenance and Repair Procurement Control Document Control In-Service Inspection Surveillance Testing Storage Operations Refueling Control of Measuring and Test Equipment Health Physics and Chemistry Operator Training and Retraining Security Emergency Plan Inspection  and Surveillance Records IV-78
En ineerin Drawin s ZII This procedure establishes the requirements for the preparation and revision of Engineering Drawings.En ineerin S ecifications This procedure defines the requirement for specifi-cations and requirements documents needed to assure that all safety related structures, components, and systems are purchased, constructed, inspected and tested in accordance with applicable codes and standards and the provisions of 10CFR50, Appendix B.The procedure establishes the content and format of the documents.
Design Control and Review This procedure defines the activities required to assure adequate control of design modifications and the requirements for design verification and review.


Table IV.l-l (cont'd.)En ineerin Procedures (cont'd.)Appendix B Criteria Purchase Re uisitions IV This procedure describes the actions required of Engineering personnel to purchase material related to quality or safety of a nuclear power plant.En ineerin Procedures The purpose of this procedure is to establish the requirements for Engineering instructions, pro-cedures and drawings needed to implement the Rochester Gas and Electric Quality Assurance Manual.It defines the responsibilities for preparing and approving the Engineering procedures manual, estab-lishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the preparation of the Engineering procedures.
I ROCHESTER GAS  Am  ELECTRIC CORPORATION GIROL STATION MANAGEHENT ORGANIZATION Chairman    of the   Board and Chief Executive Officer President Sr. Vice President                        Nuclear Safety Audit Sr. Vice President Finance 5 General Services                                                                                Electric  5 Steam                        and Review Board Vice President                                    Vice  Pr esident                                    Vice President Purchasino, Harketing,                                       and I      and   Districts                                  Chief Engineer                                  Steam and     Electric General Superintendent Purchasing Aqent                                                                                Electric  5 Steam Operations Chief                  quality Assurance Coordinator          Division Superintendent Design Engineers                                                    Elec. 8  Steam Production Plant Operations Superintendent                            Review Conmittee Ginna  Station Supervision and Administration Other punctional Relationships                            equality Control Engineer              Plant Operations Staff Figure IV. 2rl July 1, 1974
Fabrication and Construction S ecifications This procedure describes the requirements for documentation of the interpretation of engineering drawings and specifications into work instructions to permit plant operations to properly make modi-fications to the nuclear plant.
I' Table IV.l-l (cont'd.)En ineerin Procedures (cont'd.)Appendix B Criteria Control and Issuance of En ineering Documents VI This procedure establishes the requirements for the control and issuance of engineering drawings, specifications, requirements documents, and work in-structions.
It establishes the numbering system, the control of originals, approvals, distribution, and revisions for both Rochester Gas and Electric and supplier originated, drawings.Su lier Evaluation VII This procedure defines the requirements for the ,evaluation of a supplier's engineering and manu-facturing organization and his design and production capabilities to be performed prior to subcontracting a safety or quality related effort to a new supplier.Review of Test Results XI The purpose of this procedure is to establish the requirements for the review and evaluation of test results to implement the requirements of Section ll of the Rochester Gas and Electric Quality Assurance Manual.Qualit Control Deficienc Re ortin This procedure establishes the requirements for


Table XV.l-l.(cont'd.)
ROCHESTER GAS AND ELECTRIC CORPORATION QUALITY ASSURANCE ORGANIZATION Quality Assurance Coordinator H
En ineerin Procedures (cont'd.)Appendix B Criteria evaluating and answering Quality Control Deficiency Reports which are related to design deficiencies.
I ED Quality Assurance Engineer  Quality Assurance Engineer                  Quality Assurance Engineer Ouality Assurance Engineer Welding and NDE '~            Operations                                Construction                  Design Figure IV.2-2
En ineerin Records This procedure establishes the-requirements for the storage of all Engineering Department drawings, specifications, requirements documents and supplier documents for all safety related components, structures, and systems controlled by the Rochester Gas and Electric Quality Assurance Manual.Audit Re uirements XVZlZ The purpose of this procedure is to describe the re-sponsibilities of the Engineering Department before, during, and after an audit.Purchasin Procedures Purchasin Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Purchasing Procedures for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant.The manual is es-tablished to assure meeting the requirements of I
* Nondestructive Examination                        July 1,     1974
Table IV.l-l.(cont'd.)
Purchasin Procedures (cont'd.)Appendix B Criteria Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance.
Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.Trainin of Purchasin Personnel This procedure defines the requirements for the training of Purchasing Department personnel in the use of the Purchasing Procedures Manual.Purchasin De artment Or anization and-Res onsibilities This procedure describes the Purchasing Department organization and its responsibilities for the pro-curement of safety related materials, components, structures, and systems: Pre aration, Review, A royal and Issuance of Purchase Orders and Chan e Orders This procedure establishes the procedure for processing a Purchase Order upon receipt of a Purchase Requisition.
Purchasin Procedures The purpose of this procedure is to establish the requirement for purchasing instructions and I I' Table IV.1-1.(cont'.)Purchasin Procedures (cont'd.)Appendix B Criteria procedures needed to implement the Rochester Gas and Electric Quality Assurance Manual.It defines the re-sponsibilities for preparing and approving the Pur-chasing Procedures Manual, establishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the pre-paration of the purchasing procedures.
Control and Issuance of Purchasin Procedures VI This procedure establishes the methods for the de-velopment, maintenance, control, and issuance of the Purchasing Procedures Manual.Su lier Qualification, Surveillance, and Control VII This procedure describes the requirements for qualifying suppliers, maintaining records of approved suppliers, and evaluating their performance during the manufacturing stage to assure conformance to specification requirements.
Suppliers shall be evaluated prior to issuance of a purchase order to insure that they are capable of manufacturing and delivering a product conforming to the applicable purchase specifications.
Qualified Su liers List VII This procedure describes the method to be used for the development and maintenance of the Qualified Suppliers List.


Table IV.l-l (cont'd.)Purchasin Procedures (cont'd.)Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.Qualit Control Deficienc Re ortin This procedure describes the actions to be taken by.the Purchasing Department when supplier deficiencies which require corrective action are discovered.
ROCHESTER CAS AND ELECTRIC CORPORATION GINNA STATION ORGANIZATION Superintendent Training Coordinator Assistant Superintendent SOL Results and Tests  Supervisor  Operations                        Naintenance            Nuclear                Ouality Contxol Engineer      Chemistry and  Engineet                          Engineer              Engineer                    Engineer Health Physics
Purchasin Records This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.Audit Re uirements XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.
                                                  >SOL Sh1ft Foreman 1/Sh1ft OL Head Control Operator l/Sh1f t Control Operator OL                                              SOL  - Sen1or Operator L1cense 1/Sh1 ft                                                      OL  - Operator L1cense Aux111ary Operator 2/Sh1f t Pigutc IV. 2-3 July I, 1974


Table IV.l-l (cont'd.)Purchasin Pro'cedures (cont'd.)Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.Qualit Control Deficienc Re ortin This procedure describes the actions to be taken by.the Purchasing Department when supplier deficiencies which require corrective action are discovered.
GINNA STATION EQUALITY CONTROL ORGANIZATION guality Control Engineer guality Control Engineer                guality Control Technician Records .
Purchasin Records XVII This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures,.
Inspection Figure IV.2-4 July 1,  1974
and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.Audit Re uirements XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.  


TABLE IV.4-1 Procurement Document Re uirements Items to be considered for inclusion in procurement documents include: 1.Component identification.
ROCHESTER GAS AHD ELECTRIC CORPORATION EHGIHEERIHG DEPARTNEHT ORGANIZATION Vice President and Chief Engineer Assistant Chief Engineer Evaluation    Chief                                      Chief                                        Chief    quality Assurance Environmental      Chief                                                  Chief Nuclear Engineer          Electrical Engineer        Nechanical Engineer Civil Engineer  Coordinator Engineer    Engineer Figure IV.2-5 July 1, 1974
2.Component or system safety class.4 3.Quantitative and qualitative technical and function require-ments and acceptance/rejection criteria.4.Applicable regulatory code and standard requirements.
5.Drawings, specifications, instructions, and procedures to be invoked on suppliers.
6.Special test and inspection requirements.
7.Submittal, approval, and retention requirements for documents l such as special process and test procedures, quality assurance manuals, materials records, calculations and analyses.8.Applicable lOCFR50, Appendix B quality assurance requirements, such as for document control, control of special processes, and control of sub-contractors work or services.9.Access rights for visits and audits by Rochester Gas and Electric and their agents.10.Interface requirements with other organizations; e.g., document submitt'al and review requirements between organizations.
ll.Special requirements or responsibilities for design, procedure preparation, fabrication, cleaning, testing, packaging, handling, shipping, and storing.


TABLE IV.18-1 Audit List E~Functional Or anization Activities Audited Engineering Indoctrination and Training Design Control Procurement Document Control Document Control Control of Special Processes Records Purchasing Indoctrination and Training Procurement Document Control Records Ginna Station Indoctrination and Training Modification Maintenance and Repair Procurement Control Document Control In-Service Inspection Surveillance Testing Storage Operations Refueling Control of Measuring and Test Equipment Health Physics and Chemistry Operator Training and Retraining Security Emergency Plan Inspection and Surveillance Records IV-78 I
S Rochester Gald      Electric Corporation Ginna   Station Review and   Audits Functions NSARB PORC Purchasing                       Engineering              Plant Review Audit Pigure IV. 2-6 July 1, 1974
ROCHESTER GAS Am ELECTRIC CORPORATION GIROL STATION MANAGEHENT ORGANIZATION Chairman of the Board and Chief Executive Officer President Sr.Vice President Finance 5 General Services Sr.Vice President Electric 5 Steam Nuclear Safety Audit and Review Board Vice President Purchasino, Harketing, I and Districts Vice Pr esident and Chief Engineer Vice President Steam and Electric Purchasing Aqent General Superintendent Electric 5 Steam Operations Chief Design Engineers quality Assurance Coordinator Division Superintendent Elec.8 Steam Production Superintendent Ginna Station Plant Operations Review Conmittee Supervision and Administration Other punctional Relationships equality Control Engineer Plant Operations Staff Figure IV.2rl July 1, 1974  


ROCHESTER GAS AND ELECTRIC CORPORATION QUALITY ASSURANCE ORGANIZATION Quality Assurance Coordinator H I ED Quality Assurance Engineer Welding and NDE'~Quality Assurance Engineer Operations Quality Assurance Engineer Construction Ouality Assurance Engineer Design*Nondestructive Examination Figure IV.2-2 July 1, 1974
8'L 0


ROCHESTER CAS AND ELECTRIC CORPORATION GINNA STATION ORGANIZATION Superintendent Assistant Superintendent Training Coordinator Results and Tests Engineer Supervisor Chemistry and Health Physics SOL Operations Engineet Naintenance Engineer Nuclear Engineer Ouality Contxol Engineer>SOL Sh1ft Foreman 1/Sh1ft Head Control OL Operator l/Sh1f t Control Operator OL 1/Sh1 f t SOL-Sen1or Operator L1cense OL-Operator L1cense Aux111ary Operator 2/Sh1f t Pigutc IV.2-3 July I, 1974  
QpgCCtJL 6 Introduction In May 28, 1974 letter from Mr. Robe the Unit States Atomic Energy Commissio asked several A. Purple, l-i(o ~
questions n the R. E. Ginna Quality Ass ance Program for Statio Operation. The informatio requested and further cia ification of the program e provided in Supplement I to the Technical Supp ment accompanying Application r a Full-Term Operat'            License. Supplement IV is a revis d description of t           R. E. Ginna Quality Assurance Prog am for Station 0 eration and supersedes Supplement II i its entirety. The following revisions have been made          the descri ion of the program:
Section IV.2 Additions That    all  Quality ssurance, Quality Control, Engin-eering,    and Pur  a ing procedures are reviewed for adequacy at le st o ce every two years.
That the    li  of stru tures, systems, and components covered by he quality assurance program are based on the list 'n Section 1.2 1 of the FSAR.
h That  m  naaement  review o  the quality assurance    program may b    in  a form other th    an  audit.
Tha    the Nuclear Safety Audit and Review Board is re  ired to review the statu and adequacy of the q  ality assurance program at east once every two ears.
That the Chairman of the Nuclear Safety Audit and Review Board    reports to the Chai    an  of the Board of Rochester    Gas and  Electric  Cor  ration on NSARB activities.
Section IV.3 Additions That spare or replacement parts meet, at least, the requirements of the original design.
Revis'on  1 August 1974


GINNA STATION EQUALITY CONTROL ORGANIZATION guality Control Engineer guality Control Engineer Inspection guality Control Technician Records.Figure IV.2-4 July 1, 1974
f (I
t f
II ~


ROCHESTER GAS AHD ELECTRIC CORPORATION EHGIHEERIHG DEPARTNEHT ORGANIZATION Vice President and Chief Engineer Assistant Chief Engineer Evaluation Engineer Chief Environmental Engineer Chief Nuclear Engineer Chief Electrical Engineer Chief Nechanical Engineer Chief Civil Engineer quality Assurance Coordinator Figure IV.2-5 July 1, 1974 S
That for plant modification, the design engineer selects and reviews materials, parts,   and equipment for suitability of application.
Rochester Gald Electric Corporation Ginna Station Review and Audits Functions NSARB PORC Purchasing Engineering Plant Review----Audit Pigure IV.2-6 July 1, 1974 8'L$0 QpgCCtJL 6 l-i(o~Introduction Section IV.2 In May 28, 1974 letter from Mr.Robe A.Purple, the Unit States Atomic Energy Commissio asked several questions n the R.E.Ginna Quality Ass ance Program for Statio Operation.
That design deficiencies, are documented and controlled in accordance with Section IV.16.
The informatio requested and further cia ification of the program e provided in Supplement I to the Technical Supp ment accompanying Application r a Full-Term Operat'License.Supplement IV is a revis d description of t R.E.Ginna Quality Assurance Prog am for Station 0 eration and supersedes Supplement II i its entirety.The following revisions have been made the descri ion of the program: Additions That all Quality ssurance, Quality Control, Engin-eering, and Pur a ing procedures are reviewed for adequacy at le st o ce every two years.That the li of stru tures, systems, and components covered by he quality assurance program are based on the list'n Section 1.2 1 of the FSAR.h That m naaement review o the quality assurance program may b in a form other th an audit.Tha the Nuclear Safety Audit and Review Board is re ired to review the statu and adequacy of the q ality assurance program at east once every two ears.That the Chairman of the Nuclear Safety Audit and Review Board reports to the Chai an of the Board of Rochester Gas and Electric Cor ration on NSARB activities.
That design documents are collected, stored, and main-
Section IV.3 Additions That spare or replacement parts meet, at least, the requirements of the original design.Revis'on 1 August 1974 f (I t f II~
  . tained in accordance with Section II.17 and a listing of which design documents are maintained.
That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.
I Clarification Clarified which design   documents are reviewed by Quality Assurance.
That design deficiencies, are documented and controlled in accordance with Section IV.16.That design documents are collected, stored, and main-.tained in accordance with Section II.17 and a listing of which design documents are maintained.
Section IV.4 Additions That procurement documents     for spare or replacement parts are processed in the     same manner as other procurement documents.
I Clarification Clarified which design documents are reviewed by Quality Assurance.
That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.
Section IV.4 Additions That procurement documents for spare or replacement parts are processed in the same manner as other procurement documents.
That the documents are available     for verification in Purchasing and plant records.
That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.That the documents are available for verification in Purchasing and plant records.That Quality Control reviews procurement documents for spare and replacement parts fox similarity to the original requirements, and adequacy of quality require-ments.Section IV.5 Clarification Clarifies which documents are reviewed by Quality Assurance.
That Quality Control reviews procurement documents       for spare and replacement parts fox similarity to the original requirements,     and adequacy of quality require-ments.
Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.IV-ii Revision 1 August 1974  
Section IV.5 Clarification Clarifies which   documents are reviewed by Quality Assurance.
Section IV.6 Addition Made   procurement document review requirements consistent with Section IV.4.
IV-ii                 Revision 1 August 1974


That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.
That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.
Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.Added Quality Control responsibilities for sur-veillance and inspection of special process activi-ties.Section IV..10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of the activity.That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification
Section IV.9 Additions Made   procurement document review requirements consistent with Section IV.4.
'of the organization responsible for performing the inspection, the acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.I That inspection equipment is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.Section IU.ll Addition That test procedures include test methods and test instrumentation definition.
Added Quality Control responsibilities for sur-veillance and inspection of special process activi-ties.
IV-iii Revision 1 August l974  
Section IV..10 Additions That   all documentation necessary to perform an inspection is available to the inspector prior to the performance of the activity.
That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification 'of the organization responsible for performing the inspection, the acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.               I That inspection equipment is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.
Section   IU.ll Addition That   test procedures include test methods and test instrumentation definition.
IV-iii             Revision   1 August l974


Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.
Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.
Section IV.14 Addition That written procedures control the use of hold tags, test tags and labels and that the procedures require the recording of the name of the person placing and removing the tag.Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and'that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.Section IV.17 Additions That plant records include operating logs, specifications, calibration procedures and nonconformance reports, and the results of tions, tests, audits and the monitoring of activities and material analyses.drawings, reports, inspec-plant That quality assurance records of special process activities are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.
Section IV.14 Addition That written procedures control the use of hold tags, test tags and labels and that the procedures require the recording of the name of the person placing and removing the tag.
Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and 'that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.
Section IV.17 Additions That plant records include operating logs,  drawings, specifications, calibration procedures and   reports, nonconformance reports, and the results of   inspec-tions, tests, audits and the monitoring of   plant activities and material analyses.
That   quality assurance records of special process activities   are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.
That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the, activity, and a record of any nonconformances.
That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the, activity, and a record of any nonconformances.
IV-iv Revision 1 August 1974  
IV-iv             Revision 1 August 1974
 
Section IV.18 Addition That Quality Assurance is responsible for conducting the audits'isted in Table IV.18-1.
In July 1974, the United States Atomic Energy Commission requested information on the conformance of 'the R. E. Ginna Quality Assurance Program for Station Operation to the
-document  entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated Octob'er 1973 (Orange Book  Revision 0). The -infor-mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. The following changes have been made  to Supplement IV:
Section  IV.l Additions A description of the extent to which the quality assurance program conforms to the document. entitled "Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants",
Revision  0 dated October 1973 (Orange Book  Revision 0).
On  October 1, 1974, Rochester  Gas and Electric Cor-poration revised its corporate'structure. This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program. In addition, the RGSE commitment to the "Orange Book" in August has necessitated some shifting of responsibilities. The changes RG&E has made are reflected in Revision 2 to Supplement IV to the Technical Supplement accompanying Application for a Full Term Operating License.
The changes affect every section of the supplement except, sections 12 6 14. Change pages are listed in Instructions 2 and each revised page is marked with revision level.      In addition, the latest zevision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next,to each vertical line.
Revision  2 November 1, 1974
 
Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii. Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement  II and Supplement IV. Some editorial corrections have been made and these are also marked.
IV-vA              Revision  2 November 1, 1974


Section IV.18 Addition That Quality Assurance is responsible for conducting the audits'isted in Table IV.18-1.In July 1974, the United States Atomic Energy Commission requested information on the conformance of'the R.E.Ginna Quality Assurance Program for Station Operation to the-document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated Octob'er 1973 (Orange Book-Revision 0).The-infor-mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License.The following changes have been made to Supplement IV: Section IV.l Additions A description of the extent to which the quality assurance program conforms to the document.entitled"Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0).On October 1, 1974, Rochester Gas and Electric Cor-poration revised its corporate'structure.
TABLE OF CONTENTS Section               Title                              Pacae QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Iv.l      Quality Assurance Program                      IV-1 IV.2      Organization                                    IV-5 IV.3      Design Control                                  IV-12 IV.4      Procurement Document Control                    IV-16 IV.5      Instructions, Procedures,   and Drawings        IV-18 IV.6      Document  Control                              IV-21 IV.7      Control of Purchased Material, Equipment            23 and Services IV. 8    Identification  and Control of Materials,      IV-28
This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program.In addition, the RGSE commitment to the"Orange Book" in August has necessitated some shifting of responsibilities.
        ~
The changes RG&E has made are reflected in Revision 2 to Supplement IV to the Technical Supplement accompanying Application for a Full Term Operating License.The changes affect every section of the supplement except, sections 12 6 14.Change pages are listed in Instructions-2 and each revised page is marked with revision level.In addition, the latest zevision is marked with a vertical line in the left hand margin of each page.The revision level is noted by an arabic numeral next,to each vertical line.Revision 2 November 1, 1974  
Parts, and Components IV.9      Control of Special Processes                    IV-30 IV.10      Inspection                                      IV-31 IV.11      Test Control                                    IV-34 IV.12      Control of Measuring and Test Equipment        IV-35 IV.13      EIandling, Storage, and Shipping                IV-37 IV.14      Inspection, Test, and Operating Status          IV-39 IV.15      Nonconforming Materials, Parts, and            IV-41 Components IV.16      Corrective Action                              IV-42 IV.17      Quality Assurance Records                      IV-45 IV.18    Audits                                          IV-47 IV-vi                  Revision 1 August'1974


Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii.Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement II and Supplement IV.Some editorial corrections have been made and these are also marked.IV-vA Revision 2 November 1, 1974  
LIST OF TABLES Table Number            Title                              Pa<ac IV.1-1            Quality Assurance Program                IV-51*
Procedures  Subject Listing IV.4-1            Procurement Document Requirements      IV-77**
IV.18-1            Audit List                              IV 78**
LIST OF FIGURES Fi ure  Number          Title                              Pacae IV.2-1              Management  Organization              IV-79**
IV.2-2              Quality Assurance Organization          IV-80**
IV.2-3              Ginna Station Organization              IV-81 IV.2-4              Quality Control Organization            IV-82 IV.2-5              Engineering Department OrganizationIV-83**
dl IV.2-6              Review and Audit Functions            IV-84
  *Pages IV-51 through IV-58 have been   revised.
,**Table IV.4-1, Table IV.18-1, Figure    IV.2-1,'igure IV.2-2 and Figure IV.2-5 have been revised.
IV-vii                Revision   2 November 1, 1974


TABLE OF CONTENTS Section Title Pacae QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Iv.l IV.2 IV.3 IV.4 IV.5 IV.6 IV.7 Quality Assurance Program Organization Design Control Procurement Document Control Instructions, Procedures, and Drawings Document Control Control of Purchased Material, Equipment and Services IV-1 IV-5 IV-12 IV-16 IV-18 IV-21 23 IV.8 IV.9 IV.10 IV.11 IV.12 IV.13 IV.14 IV.15 IV.16 IV.17 IV.18 Identification and Control of Materials,~Parts, and Components Control of Special Processes Inspection Test Control Control of Measuring and Test Equipment EIandling, Storage, and Shipping Inspection, Test, and Operating Status Nonconforming Materials, Parts, and Components Corrective Action Quality Assurance Records Audits IV-28 IV-30 IV-31 IV-34 IV-35 IV-37 IV-39 IV-41 IV-42 IV-45 IV-47 IV-vi Revision 1 August'1974  
QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro      ram The  quality assurance    program described    in this Supplement has been developed by the Rochester Gas and Electric Corpora-tion to assure safe and reliable operation of the R. E. Ginna Nuclear Power Plant.     This program applies to    all activities affecting the safety related functions of the structures, systems, and components that prevent or mitigate the con-sequences of postulated accidents that could cause undue risk .to the health and safety of the public. These quality affecting activities include operating, maintaining, repair-ing, refueling and modifying.
The  basic Rochester  Gas and    Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate State-ment of Quality Assurance Policy. This policy is imple-mented by the Vice President, Electric and Steam Production through the Quality Assurance Coordinator and the Ginna Station Superintendent.
The program  is  governed by    a  Ginna Station  Quality Assurance Manual which contains the requirements        and assignment of  responsibilities for implementation of the program. The  manual is. prepared, reviewed, and maintained      by Quality Assurance   and approved by the Vice      President, Electric  and Steam  Production.
IV-1                    Revision 2 November 1, 1974


LIST OF TABLES Table Number IV.1-1 IV.4-1 IV.18-1 Title Quality Assurance Program Procedures Subject Listing Procurement Document Requirements Audit List Pa<ac IV-51*IV-77**IV 78**LIST OF FIGURES Fi ure Number IV.2-1 IV.2-2 IV.2-3 IV.2-4 IV.2-5 IV.2-6 Title Management Organization Pacae IV-79**Quality Control Organization IV-82 Engineering Department OrganizationIV-83**
The program  is implemented through Quality Assurance, Quality Control, Engineering,      and Purchasing    Procedures.
dl Review and Audit Functions IV-84 Quality Assurance Organization IV-80**Ginna Station Organization IV-81*Pages IV-51 through IV-58 have been revised.,**Table IV.4-1, Table IV.18-1, Figure IV.2-1,'igure IV.2-2 and Figure IV.2-5 have been revised.IV-vii Revision 2 November 1, 1974  
These procedures    are prepared and approved by the responsible organization      (i.e., Quality   Assurance,    Opera-tions, Engineering,    and Purchasing)    and reviewed and concurred with by Quality Assurance.         The procedures    are contained in separate manuals maintained by the responsible organization. All these procedures are reviewed for adequacy  at least,,once every two years by the responsible organization. Table IV.1-1 provides a listing of the subjects and a short description of the subject matter which is contained in the procedures.
Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual. Organizational responsibilities are described in Section IV.2.
The  quality  assurance  program covers    all existing  Seismic Category  I structures,  systems,  and components,   including their foundations and supports.       Activities affecting the quality of these structures, systems,        and components are controlled to an extent consistent with        their importance to safety. A detailed listing of the structures, systems, IV-2                  Revision   2 November 1, 1974


QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Corpora-tion to assure safe and reliable operation of the R.E.Ginna Nuclear Power Plant.This program applies to all activities affecting the safety related functions of the structures, systems, and components that prevent or mitigate the con-sequences of postulated accidents that could cause undue risk.to the health and safety of the public.These quality affecting activities include operating, maintaining, repair-ing, refueling and modifying.
S. i and components    covered by, the  quality assurance program, based on Section 1.2.1    of the Final Facility Description and  Safety Analysis Report, is contained in the Quality Assurance Manual.
The basic Rochester Gas and Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate State-ment of Quality Assurance Policy.This policy is imple-mented by the Vice President, Electric and Steam Production through the Quality Assurance Coordinator and the Ginna Station Superintendent.
Details of the system boundaries and the quality classifi-cation of water-and-steam-containing components are con-tained on system Slow drawings. The listing of structures, systems,  and components  covered by the    quality assurance program and 'the system flow drawings are prepared and maintained by Engineering and reviewed and concurred with by Quality Assurance.
The program is governed by a Ginna Station Quality Assurance Manual which contains the requirements and assignment of responsibilities for implementation of the program.The manual is.prepared, reviewed, and maintained by Quality Assurance and approved by the Vice President, Electric and Steam Production.
Modifications or additions to existing structures, systems, and components  are designated    the   same seismic  classifica-tion  as the existing system. New  structures, systems, and components    are designated    a seismic classification in accordance with the guidelines        in USAEC  Regulatory Guide 1.29.
IV-1 Revision 2 November 1, 1974  
Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced.      Personnel responsible    for performing activities 'affecting quality    are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures. Refresher sessions IV-3                    Revision 2 November 1, 1974


The program is implemented through Quality Assurance, Quality Control, Engineering, and Purchasing Procedures.
are held  periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure. Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.
These procedures are prepared and approved by the responsible organization (i.e., Quality Assurance, Opera-tions, Engineering, and Purchasing) and reviewed and concurred with by Quality Assurance.
Quality Assurance assists in establishing training re-quirements and assures that personnel are trained by auditing training records.
The procedures are contained in separate manuals maintained by the responsible organization.
In addition to training in quality assurance, each department conducts on-the-job training to assure that personnel are qualified for their primary  work assignments.
All these procedures are reviewed for adequacy at least,,once every two years by the responsible organization.
The Ginna  Station Superintendent is responsible for the formal training, qualification, licensing, and requali-fication of operators, as necessary. Where necessary, personnel are trained in radiation protection, plant safety and security.
Table IV.1-1 provides a listing of the subjects and a short description of the subject matter which is contained in the procedures.
The Nuclear  Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least  once every two years to assure that  it is meaningful and is effectively complying with corporate policy and 10CFR50, Appendix B. This review consists of audits or a review equivalent to an audit performed by company personnel or outside consultants. Reviews will be conducted every six months during the first two years that the program  is  implemented.
Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual.Organizational responsibilities are described in Section IV.2.The quality assurance program covers all existing Seismic Category I structures, systems, and components, including their foundations and supports.Activities affecting the quality of these structures, systems, and components are controlled to an extent consistent with their importance to safety.A detailed listing of the structures, systems, IV-2 Revision 2 November 1, 1974 S.i and components covered by, the quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assurance Manual.Details of the system boundaries and the quality classifi-cation of water-and-steam-containing components are con-tained on system Slow drawings.The listing of structures, systems, and components covered by the quality assurance program and'the system flow drawings are prepared and maintained by Engineering and reviewed and concurred with by Quality Assurance.
Modifications or additions to existing structures, systems, and components are designated the same seismic classifica-tion as the existing system.New structures, systems, and components are designated a seismic classification in accordance with the guidelines in USAEC Regulatory Guide 1.29.Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced.Personnel responsible for performing activities
'affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures.
Refresher sessions IV-3 Revision 2 November 1, 1974


are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure.
The    quality assurance program is designed to meet the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants." The program con-forms to the following        AEC  Regulatory Guides and ANSI Standards:
Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.Quality Assurance assists in establishing training re-quirements and assures that personnel are trained by auditing training records.In addition to training in quality assurance, each department conducts on-the-job training to assure that personnel are qualified for their primary work assignments.
a ~  AEC  Regulatory Guide 1.8, "Personnel Selection f
The Ginna Station Superintendent is responsible for the formal training, qualification, licensing, and requali-fication of operators, as necessary.
and Training", and regulatory staf comments and supplementary guidance contained i'n the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book  Revision 0)
Where necessary, personnel are trained in radiation protection, plant safety and security.The Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that it is meaningful and is effectively complying with corporate policy and lOCFR50, Appendix B.This review consists of audits or a review equivalent to an audit performed by company personnel or outside consultants.
: b. AEC  Regulatory Guide 1.28, "Quality Assurance Program Requirements (Design and Construction)",
Reviews will be conducted every six months during the first two years that the program is implemented.
and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book  Revision 1)
Note: The requirements and guidelines contained in ANSI N45.2 and associated standards are applied only to Seismic Category I structures, systems, and components, including their foundations and "supports.
c ~  AEC  Regulatory Guide 1.30, "Quality Assurance Requirements    for 'the Installation, Inspection; and Testing of Instrumentation and Electric Equipment"
: d. AEC  Regulatory Guide 1.33, "Quality Assurance Program Requirements (Operation)", and regula-tory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants",
Revision 0 dated October 1973 (Orange Book Revision 0)
IV-4A              Revision"1 August 1974


The quality assurance program is designed to meet the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants." The program con-forms to the following AEC Regulatory Guides and ANSI Standards:
1
a~AEC Regulatory Guide 1.8,"Personnel Selection and Training", and regulatory staf f comments and supplementary guidance contained i'n the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0)b.AEC Regulatory Guide 1.28,"Quality Assurance Program Requirements (Design and Construction)", and regulatory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book-Revision 1)c~Note: The requirements and guidelines contained in ANSI N45.2 and associated standards are applied only to Seismic Category I structures, systems, and components, including their foundations and"supports.
: e. AEC Regulatory Guide 1.37, "Quality Assurance Requirements   for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants"
AEC Regulatory Guide 1.30,"Quality Assurance Requirements for'the Installation, Inspection; and Testing of Instrumentation and Electric Equipment" d.AEC Regulatory Guide 1.33,"Quality Assurance Program Requirements (Operation)", and regula-tory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0)IV-4A Revision"1 August 1974 1
: f. AEC   Regulatory Guide 1.38, "Quality Assurance Requirements   for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants"
e.AEC Regulatory Guide 1.37,"Quality Assurance Requirements for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants" f.AEC Regulatory Guide 1.38,"Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants" g.AEC Regulatory Guide 1.39,"Housekeeping Require-ments for Water-Cooled Nuclear Power Plants" h.AEC Regulatory Guide 1.58,"Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel" i.AEC Regulatory Guide 1.64,"Quality Assurance Requirements for the Design of Nuclear Power Plants" j.AEC Regulatory Guide 1.74,"Quality Assurance Terms and Definitions" k.Extracts from ANSI N45.2.8,"Supplementary Quality Assurance Requirements for Installation, Inspec-tion, and Testing of Mechanical Equipment and Systems for the Construction Phase of Nuclear Power Plants", contained in the document entitled"Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book-Revision 0)l.ANSI N45.2.9,"Requirements for Collection, Storage, and Maintenance of Quality Assurance Records for Nuclear Power Plants" Note: When record storage facilities are not, designed in accordance with the requirements of ANSI N45.2.9, duplicate records are kept in two separate storage locations in separate buildings which are physically isolated from each other.m.ANSI N45.2.12,"Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants" IV-4B Revision 2 November 1, 1974  
: g. AEC   Regulatory Guide 1.39, "Housekeeping Require-ments   for Water-Cooled Nuclear Power Plants"
: h. AEC Regulatory Guide 1.58, "Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel"
: i. AEC Regulatory Guide 1.64, "Quality Assurance Requirements   for the Design of Nuclear Power Plants"
: j. AEC Regulatory Guide 1.74, "Quality Assurance Terms and   Definitions"
: k. Extracts from ANSI N45. 2. 8, "Supplementary Quality Assurance Requirements for Installation, Inspec-tion, and Testing of Mechanical Equipment and Systems for the Construction Phase of Nuclear Power Plants", contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book - Revision   0)
: l. ANSI N45.2.9, "Requirements for Collection, Storage, and Maintenance of Quality Assurance Records for Nuclear Power Plants" Note: When record storage facilities are not, designed   in accordance with the requirements of ANSI N45.2.9, duplicate records are kept in two separate storage locations in separate buildings which are physically isolated from each other.
: m. ANSI   N45.2.12, "Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants" IV-4B               Revision 2 November 1, 1974
: n. ANSI N45.2.13, -"Quality Assurance Requirements for Control of Procurement of Equipment, Materials and Services for Nuclear Power Plants," and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement 'Phase of Nuclear Power Plants",, Revision 1 dated May 1974 (Gray Book Revision 1)
IV-4C            Revision 1 August 1974


n.ANSI N45.2.13,-"Quality Assurance Requirements for Control of Procurement of Equipment, Materials and Services for Nuclear Power Plants," and regulatory staff comments and supplementary guidance contained in the document entitled"Guidance on Quality Assurance Requirements During Design and Procurement
y, IV.2 The major  organizations participating in the quality assurance program are the Purchasing, Engineering, and Electric and Steam Production Departments; Quality Assurance; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board. Figure IV.2-1 is an organizational chart showing these organizations and  their relationship to the corporate organization.
'Phase of Nuclear Power Plants",, Revision 1 dated May 1974 (Gray Book-Revision 1)IV-4C Revision 1 August 1974  
Positions responsible for the principal elements of the quality assurance program are:
Chairman  of the  Board Vice President, Electric and Steam Production Vice President, Engineering and Construction Chief Engineer Quality  Assurance Coordinator Quality  Assurance Engineer, QA Programs Quality  Assurance Engineer, Operations Quality Assurance Engineer, Design Quality  Assurance Engineer, Welding and=Nondestructive Examination Purchasing Agent Ginna Station Superintendent Ginna Station  Quality Control Engineer In addition to the above. individuals, two advisory groups are utilized to review and audit plant operations. These IV-5              Revision 2 November 1, 1974


y, IV.2 The major organizations participating in the quality assurance program are the Purchasing, Engineering, and Electric and Steam Production Departments; Quality Assurance; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board.Figure IV.2-1 is an organizational chart showing these organizations and their relationship to the corporate organization.
II are the Plant 'Operations Review Committee and the Nuclear Safety Audit and Review Board. The Plant Operations Review Committee acts in an advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and Review Board advises     the Vice President, Electric   and Steam Production. The qualifications of members   and the responsibilities of these organizations are described   in Appendix A to Provisional Operating License No. DPR-18, Section 6.0, Technical Specifications.
Positions responsible for the principal elements of the quality assurance program are: Chairman of the Board Vice President, Electric and Steam Production Vice President, Engineering and Construction Chief Engineer Quality Assurance Coordinator Quality Assurance Engineer, QA Programs Quality Assurance Engineer, Operations Quality Assurance Engineer, Design Quality Assurance Engineer, Welding and=Nondestructive Examination Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer In addition to the above.individuals, two advisory groups are utilized to review and audit plant operations.
The Chairman   of the Board of the Rochester Gas and fl Electric Corporation directed the establishment of the quality assurance program and issued the governing policy statement. He has established the Nuclear Safety Audit and Review Board to review and audit plant operations.
These IV-5 Revision 2 November 1, 1974 II are the Plant'Operations Review Committee and the Nuclear Safety Audit and Review Board.The Plant Operations Review Committee acts in an advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and Review Board advises the Vice President, Electric and Steam Production.
The Chairman of the Nuclear Safety Audit and Review Board is responsible to the Chairman of the Board on all acti-vities of the Nuclear Safety Audit and Review Board.
The qualifications of members and the responsibilities of these organizations are described in Appendix A to Provisional Operating License No.DPR-18, Section 6.0, Technical Specifications.
The Vice President,   Electric and Steam Production has
The Chairman of the Board of the Rochester Gas and fl Electric Corporation directed the establishment of the quality assurance program and issued the governing policy statement.
.corporate responsibility for operation of Ginna Station in accordance with applicable regulatory requirements. He is responsible for establishing the policies and require-ments necessary to assure safe and reliable operation'f Ginna Station. He is also responsible for those items XV-6               Revision 2 November 1, 1974
He has established the Nuclear Safety Audit and Review Board to review and audit plant operations.
The Chairman of the Nuclear Safety Audit and Review Board is responsible to the Chairman of the Board on all acti-vities of the Nuclear Safety Audit and Review Board.The Vice President, Electric and Steam Production has.corporate responsibility for operation of Ginna Station in accordance with applicable regulatory requirements.
He is responsible for establishing the policies and require-ments necessary to assure safe and reliable operation'f Ginna Station.He is also responsible for those items XV-6 Revision 2 November 1, 1974  


delineated in Section 6.0, Technical Specifications.
delineated in Section 6.0, Technical Specifications.
He has overall responsibility for and authority to direct quality affecting activities.
He has overall responsibility for and authority to direct quality affecting activities. He has assigned the responsibility for the detailed development and overall coordination of the quality assurance program to the Quality Assurance Coordinator.
He has assigned the responsibility for the detailed development and overall coordination of the quality assurance program to the Quality Assurance Coordinator.
The responsibility for proper implementation of the quality assurance program requirements at Ginna Station has been assigned   to the Ginna Station Superintendent.
The responsibility for proper implementation of the quality assurance program requirements at Ginna Station has been assigned to the Ginna Station Superintendent.
The Vice President,   Engineering and Construction is responsible for the design and construction of plant   I,"
The Vice President, Engineering and Construction is responsible for the design and construction of plant I," modifications in accordance with applicable design bases, regulatory requirements, codes and standards.
modifications in accordance with applicable design bases, regulatory requirements, codes and standards. He delegates these responsibilities to the Chief Engineer.
He delegates these responsibilities to the Chief Engineer.The Chief Engineer has the responsibility for preparing drawings and specifications for the procurement of materials H and components for plant maintenance and modification as required.He is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing maintenance and repair procedures for major equipment.
The Chief Engineer has the responsibility for preparing drawings and specifications for the procurement of materials H
The Quality Assurance Coordinator is responsible for establishing and executing the overall quality assurance program.He is responsible for assuring that the program 2 satisfies the requirements of lOCFR50, Appendix B, IV-7 Revision 2 November 1, 1974 O.
and components for plant maintenance and modification as required. He   is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing maintenance and repair procedures for major equipment.
and for keeping the total program updated.He is re-sponsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and.reliably are established and followed.He provides management with objective information concerning quality, independent of the individual or group directly responsible for per-forming the specific activity.He has the authority and organizational freedom to assure all necessary quality affecting activities are performed.
The Quality Assurance Coordinator is responsible for establishing and executing the overall quality assurance program. He is responsible for assuring that the program 2
He is responsible for maintaining a quality assurance staff and directing its act'ivities and for establishing and implementing a comprehensive audit program.The Quality Assurance Coordinator is a graduate engineer with at least six years of responsible experience, of which two years is in quality assurance and three years in the design or operation of nuclear or fossil fuel power plants.The Quality Assurance Engineer, Operations
satisfies the requirements of 10CFR50, Appendix B, IV-7               Revision 2 November 1, 1974
'is responsible for supervising the operational quality assurance program for Ginna Station.This includes writing quality assurance policies and procedu'r'es., coordinating supplier qualification and surveillance, and establishing and implementing the in-C service inspection program.He is responsible for staying<'n IV-8 il current in all applicable regulatory and code quality assurance requirements and providing guidance and assistance to the Ginna Station Superintendent, the Ginna Station Quality Control Engineer, and other affected personnel on these requirements.
 
The Quality Assurance Engineer, Design is responsible for interpreting the requirements of 10CFR50, Appendix B and applicable regulatory and code requirements related to plant modifications and providing guidance and assistance to engineering and station personnel on these requirements.
O.
He writes quality assurance policies and procedures related to design activities and interfaces between Engineering and other departments.
and for keeping the total program updated. He is re-sponsible for assuring that all the planned   and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and .reliably are established and followed. He provides management with objective information concerning quality, independent of the individual or group directly responsible for per-forming the specific activity. He has the authority and organizational freedom to assure all necessary quality affecting activities are performed. He is responsible for maintaining a quality assurance staff and directing its act'ivities and for establishing and implementing a comprehensive audit program.
He is responsible for reviewing engineering and procurement documents to assure that~quality assurance requirements are incorporated.
The Quality Assurance Coordinator is a graduate engineer with at least six years of responsible experience, of which two years is in quality assurance and three years in the design or operation of nuclear or fossil fuel power plants.
The Quality Assurance Engineer, Welding and Nondestructive v'Examination is responsible for developing and qualifying procedures
The Quality Assurance Engineer, Operations 'is responsible for supervising the operational quality assurance program for Ginna Station. This includes writing quality assurance policies and procedu'r'es., coordinating supplier qualification and surveillance, and establishing and implementing the in-C service inspection program. He is responsible for staying
'for special processes.
                        <'n IV-8
He is also responsible for assuring that personnel are trained and qualified in special processes and for inspection activities in-volving nondestructive examination.
 
The Quality Assurance Engineer, QA Program assists the Quality Assurance Coordinator and is responsible for implementing IV-9~Revision 2 November 1, 1974  
il current in all applicable regulatory and code quality assurance requirements and providing guidance and assistance to the Ginna Station Superintendent, the Ginna Station Quality Control Engineer, and other affected personnel on these   requirements.
The   Quality Assurance Engineer, Design is responsible for interpreting the requirements of 10CFR50, Appendix B and applicable regulatory and code requirements related to plant modifications and providing guidance and assistance to engineering and station personnel on these requirements.
He writes quality assurance policies and procedures related to design activities and interfaces between Engineering and other departments. He is responsible for reviewing engineering and procurement documents to assure that
~
quality assurance requirements are incorporated.
The Quality Assurance Engineer, Welding and Nondestructive v
  'Examination is responsible for developing and qualifying procedures 'for special processes. He is also responsible for assuring that personnel are trained and qualified in special processes and for inspection activities in-volving nondestructive examination.
The Quality Assurance Engineer, QA Program assists the Quality Assurance Coordinator and is responsible for implementing IV-9 ~             Revision 2 November 1, 1974


the program requirements assigned to Quality Assurance.
the program requirements assigned to Quality Assurance.
He is responsible for the preparation and maintenance of the Quality Assurance Procedures Manual.He also prepares and maintains the quality assurance audit schedule, plans and conducts training programs, for quality assurance personnel, and reviews corrective action reports on quality assurance deficiencies.
He is responsible for the preparation     and maintenance     of the Quality Assurance Procedures Manual.       He also prepares and maintains the quality assurance   audit schedule, plans and conducts training   programs, for quality   assurance personnel, and reviews corrective action reports on quality assurance deficiencies.
The Purchasing Agent is responsible for the procurement of materials, services, and components, from qualified ZV-9A Revision 2 November 1, 1974  
The Purchasing Agent   is responsible for the     procurement of materials, services,   and components,   from   qualified ZV-9A                   Revision   2 November 1, 1974
 
suppliers, in accordance with applicable commercial, technical, and quality requirements. He maintains a listing of qualified suppliers determined through an evaluation made by Purchasing, Engineering, Operations,,
and Quality Assurance.
The Ginna  Station Superintendent is responsible for safe operation of Ginna Station. He is responsible for the operation, maintenance, repair, refueling, and modification of Ginna .Station in accordance with the requirements of the quality assurance program. He is responsible for pro-viding qualified personnel to perform these activities in accordance with approved drawings, specifications, i
and procedures. He is also responsible for those items delineated in Section 6.0, Technical Specifications.
The Ginna  Station Assistant Superintendent supports the Ginna Station Superintendent in discharging his responsi-bilities. He is responsible for the day-to-day operation of the station and implementing the policies, procedures, and directions of the Ginna Station Superintendent.
The Ginna  Station Quality Control Engineer is responsible to the Station Superintendent for assuring that activities affecting quality are prescribed and carried out. in accordance with approved drawings, specifications, and IV-10


suppliers, in accordance with applicable commercial, technical, and quality requirements.
procedures. In his day;to-day activities, he reports to the Ginna Station Assistant Superintendent. He is a member of the Plant Operations Review Committee and is responsible for the review of all plant procedures pre-sented to the Committee. He also reviews procurement documents initiated at the plant. He is responsible for the control of documents and records stored at the plant.
He maintains a listing of qualified suppliers determined through an evaluation made by Purchasing, Engineering, Operations,, and Quality Assurance.
He co-ordinates inspection activities and assures that inspection requirements are included in approved procedures.
The Ginna Station Superintendent is responsible for safe operation of Ginna Station.He is responsible for the operation, maintenance, repair, refueling, and modification of Ginna.Station in accordance with the requirements of the quality assurance program.He is responsible for pro-viding qualified personnel to perform these activities in accordance with approved drawings, specifications, i and procedures.
He coordinates the receipt inspection of incoming materials, parts, and components and the processing of material deficiency reports. He coordinates the processing of corrective action reports, and assures that corrective P
He is also responsible for those items delineated in Section 6.0, Technical Specifications.
action is taken. He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superintendent with objective information concerning the quality of these activities.
The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging his responsi-bilities.He is responsible for the day-to-day operation of the station and implementing the policies, procedures, and directions of the Ginna Station Superintendent.
The Ginna   Station Quality Control Engineer is assisted in the performance of his duties by a staff which includes an engineer and a technician who coordinate inspection and record-keeping activities, respectively. Additional inspectors are assigned to this group as required by the level of work activities.
The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for assuring that activities affecting quality are prescribed and carried out.in accordance with approved drawings, specifications, and IV-10


procedures.
~ k 1
In his day;to-day activities, he reports to the Ginna Station Assistant Superintendent.
      'S P'
He is a member of the Plant Operations Review Committee and is responsible for the review of all plant procedures pre-sented to the Committee.
He also reviews procurement documents initiated at the plant.He is responsible for the control of documents and records stored at the plant.He co-ordinates inspection activities and assures that inspection requirements are included in approved procedures.
He coordinates the receipt inspection of incoming materials, parts, and components and the processing of material deficiency reports.He coordinates the processing of corrective action reports, and assures that corrective P action is taken.He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superintendent with objective information concerning the quality of these activities.
The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which includes an engineer and a technician who coordinate inspection and record-keeping activities, respectively.
Additional inspectors are assigned to this group as required by the level of work activities.
~k 1'S P' In addition to the Ginna Station Quality Control Engineer, the Ginna Station Superintendent is assisted by other designated staff members in the implementation of certain quality assurance program requirements at the plant.These staff members are assigned responsibility for test-ing, storage of material and equipment, operating and test status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling, and modification.
Desi n Control Design.activities are performed by Rochester Gas and Electric Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.Engineering is responsible for the design and control of\design activities (including design interfaces) for the modification of structures, systems, or components.
Design control is implemented by means of engineering procedures which include: design considerations, design review requirements; internal and external interface IV-12 Revision 2 November 1, 1974


control considerations; design document, review,'approval, distribution, control, and revision requirements; and corrective action.Design considerations include, as appropriate:
In addition to the Ginna Station Quality Control Engineer, the Ginna Station Superintendent is assisted by other designated  staff  members  in the implementation of certain quality assurance program requirements at the plant.
physics, stress, materials, thermal, hydraulic, radiation and accident analysis;appropriate design bases, codes, standards and regulations; acceptance and rejection criteria;and quality assurance requirements.
These staff members are assigned responsibility for test-ing, storage of material and equipment, operating and test status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling, and modification.
Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests I as appropriate to assure the adequacy of the design.The design of plant modifications is reviewed by an engineer other than the one who performed the original design.This may be done by Rochester Gas and Electric design engineers or consulting engineers as required.The design also is reviewed by Ginna Station for accept-ability for operation, maintenance, and repair.Spare or replacement parts must at least meet the original equipment technical and quality requirements.
Desi n Control Design. activities are performed by Rochester   Gas and Electric Corporation personnel or are subcontracted to organizations providing services to Rochester      Gas and Electric.
For plant modifications, standard"off the shelf" commercial or previously approved materials, parts, and equipment are selected and reviewed for suitability of application by tne design engineer.Revision 2 November 1, 1974 I
Engineering  is responsible for the design and control of
Design changes, including field changes, are reviewed and approved in accordance with the same procedures as the original design.In general, design changes are reviewed and approved by the organizations or individuals that performed the original design, review, and approval.Where this is not practical, other responsible design organizations or individuals are designated, provided they have access to pertinent background information and are competent in the specific design area.'Design documents are collected, stored, and maintained in accordance with Section IV.17.Design documents in-clude design criteria, analyses, specifications, drawings, design review records, and changes thereto.The Quality Assurance Coordinator is responsible for assuring that design control procedures, whether the work is done by Rochester Gas, and Electric or by other organizations, are prepared and implemented and incor-V porate appropriate design control practices,'hecks, and reviews.Design control procedures are reviewed to assure that an independent verification is performed.
                                    \
The Chief Engineer is responsible for the timely approval and updating of specifications and drawings, as well as changes or deviations thereto, utilized for purchase IV-14 Revision 2 November 1, 1974 A'
design activities (including design interfaces) for the modification of structures, systems, or components.
or installation of materials, parts, or componen Any other design documents, specifications, draw'nstallation requirements, and changes thereto, approved in the same manner.S~ngs, re H Errors and deficiencies detected in the design process are documented as conditions adverse to quality and con-trolled in accordance with the corrective action require-ments of Section IV.16.Design criteria and specifications, and changes thereto, are reviewed by Quality Assurance for the inclusion of quality assurance and quality control program requirements and the proper quality standards.
Design control  is implemented by means of engineering procedures which include: design considerations,     design review requirements;   internal  and external interface IV-12                Revision 2 November 1, 1974
The Quality Assurance Coordinator reviews and approves any deviations from quality standards when they occur.Quality Assurance also spot checks design criteria and specifications for use of proper codes, material specifications, regulatory require-ments and design bases.Plant modifications are controlled by means of applicable quality assurance and quality control procedures.
These procedures provide for the preparation, review, and approval of design documents, safety analyses, and plant modification procedures.
Proposed plant modifications are tl reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.
IV-15 Revision 2 November 1, 1974 lU Procurement Document Control I Procurement document control applies to the control of procurement documents for materials, parts, components, (and services required to perform quality affecting activities.
Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, con-tracts, specifications, and drawings..Procurement of materials, parts, components, and services is initiated by Ginna Station or Engineering Department staff personnel.
Procurement procedures require that organizations preparing procurement docume'nts consider and include, as appropriate, the items listed in Table IV.4-1.Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station are re-viewed for concurrence by Quality Control and approved by the Ginna Station Superintendent or his designated repre-sentative.
Procurement documents initiated in Engineer-ing are reviewed for concurrence by Quality Assurance and approved by the Chief Engineer or his designated represen-tative.Evidence of review and approval of procurement documents is recorded on the documents or on the attached control IV-16 Revision 2 November 1, 1974 J'
form.These documents are maintained in Purchasing and plant records.After purchase requisitions, service agreements, contracts, specifications, and drawings have received the required reviews an6 approvals, a purchase order is issued to a qualified supplier and controlled as described in Section IV.7.Under no circumstances are purchasing requirements altered (except for quantity or pricing)during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve.the original documents as described above.Engineering review of procurement documents includes verification of appropriate classifications, technical requirements, and code application.
Quality Assurance review of the above includes checks to verify that proper codes, regulatory requirements, and material specifications are invoked;that FSAR and Technical Supplement commit-ments are included;that appropriate acceptance or rejection criteria are required;and that quality assurance require-ments are incorporated., Quality Control reviews procure-ment documents for spare or replacement parts for adequacy IV-17 Revision 2 November 1, 1974  


~of quality requirements and to determine similarity, compatibility, and the inclusion of the quality require-I ments and acceptance criteria of the original design.I'Ve5 Instructions, Procedures, and Drawin s Each Rochester Gas and Electric organization is responsible for developing, reviewing, approving, and implementing procedures as required to implement the quality assurance program.These procedures cover activities such as document control, training of personnel, and responsibilities and duties of-personnel.
control considerations; design document, review, 'approval, distribution, control, and revision requirements; and corrective action. Design considerations include, as appropriate: physics, stress, materials, thermal, hydraulic, radiation and accident analysis; appropriate design bases, codes, standards and regulations; acceptance and rejection criteria; and quality assurance requirements.
Quality Assurance reviews and f concurs with these procedures.
Design  verification utilizes various  methods such as formal design reviews, alternate calculations, or tests I
Table IV.1-1 provides a summary of the subject matter contained in the procedures which are used to implement the quality assurance program.Procurement documents require suppliers and contractors to, have appropriate instructions, procedures, specifica-tions, and drawings.The Ginna Station Superintendent is responsible for pre-paring, reviewing, approving, and implementing instructions and procedures associated with operation, maintenance, repair, refueling, and modification.
as appropriate to assure the adequacy of the design.
'This includes in-structions and procedures listed in USAEC Regulatory Guide 1.33 for administrative control;general plant operation; startup, operation, and shutdown of safety 4 IV-18 Revision 2 November 1, 1974 I r h related systems;correction of abnormal, of fnormal, or alarm conditions; combat of emergencies and other sig-nificant events;radioactivity control;control of measuring and test equipment; chemical and radiochemical control;and fuel handling and refueling.
The design  of plant modifications is reviewed  by an engineer other than the one who performed the original design. This may be done by Rochester Gas and Electric design engineers or consulting engineers as required.
He is responsible for the preparation and implementation of Quality Control Procedures.
The design also is reviewed by Ginna Station for accept-ability for operation,  maintenance,  and repair.
He is also responsible for the issuance of appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the com-pletion of plant modifications.
Spare  or replacement parts must at least meet the original equipment technical and quality requirements.
The Plant Operations Review Committee has the responsi-bility for reviewing procedures prior to their approval by the Ginna Station Superintendent as required by the Section 6.0, Technical Specifications.
For plant modifications, standard "off the shelf" commercial or previously approved materials, parts, and equipment are selected and reviewed for suitability of application by tne design engineer.
Quality Control is responsible for reviewing plant administrative, operating, maintenance, repair, refueling, and modification procedures prior to use to assure quality assurance requirements are included.The Chief Engineer is responsible for preparing, reviewing, approving and issuing specifications, drawings, and installation requirements associated with plant modifi-cations.These documents require those performing the work to obtain, understand, and comply with appropriate instructions, procedures, specifications and drawings.IV-19 Revision 2 November 1, 1974 II l'N I The Chief Engineer has established procedures.for)maintaining drawings and specifications in a current status.These procedures
Revision  2 November 1, 1974
'cover updating of as-built drawings after plant modifications and the revision, approval, distribution, and control of all drawings and specifications.
 
Quality Assurance reviews design criteria and specifi-cations', and changes thereto, for concurrence with quality assurance requirements.
I Design changes,  including field changes, are reviewed and approved in accordance with the same procedures as the original design. In general, design changes are reviewed and approved by the organizations or individuals that performed the original design, review, and approval.
Where this is not practical, other responsible design organizations or individuals are designated, provided they have access to pertinent background information and are competent in the specific design area.
'Design documents are collected, stored, and maintained in accordance with Section IV.17. Design documents in-clude design criteria, analyses, specifications, drawings, design review records, and changes thereto.
The  Quality Assurance Coordinator is responsible for assuring that design control procedures, whether the work is done by Rochester Gas, and Electric or by other organizations, are prepared and implemented and incor-V porate appropriate design control practices,'hecks, and reviews. Design control procedures are reviewed to assure  that an independent  verification is performed.
The  Chief Engineer is responsible for the timely approval and  updating of specifications and drawings, as well as changes  or deviations thereto, utilized for purchase IV-14                Revision  2 November 1, 1974
 
A' or installation of materials, parts, or componen S                    ~
Any other design documents, specifications,                          ngs, requirements, and changes thereto, re draw'nstallation approved  in the  same manner.
H Errors and deficiencies detected in the design process are documented as conditions adverse to quality and con-trolled in accordance with the corrective action require-ments of Section IV. 16.
Design  criteria  and    specifications, and changes thereto, are reviewed by Quality Assurance for the inclusion of quality assurance and quality control program requirements and the proper quality standards. The Quality Assurance Coordinator reviews and approves any deviations from quality standards when they occur. Quality Assurance also spot checks design criteria and specifications for use of proper codes, material specifications, regulatory require-ments and design bases.
Plant modifications are controlled by means of applicable quality assurance and quality control procedures. These procedures provide for the preparation, review, and approval of design documents, safety analyses, and plant modification procedures. Proposed plant modifications are tl reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.
IV-15                Revision                2 November 1, 1974
 
l U
 
Procurement Document Control I
Procurement document control applies to the control        of procurement documents    for materials, parts, components,
(
and  services required to perform quality affecting activities. Such documents may be prepared by Rochester Gas and  Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, con-tracts, specifications, and drawings.
. Procurement  of materials, parts, components, and services is initiated by Ginna Station or Engineering Department staff personnel. Procurement procedures require that organizations preparing procurement docume'nts consider and include, as appropriate, the items listed in Table IV.4-1.
Procurement documents,    including those requesting spare or replacement parts, initiated at Ginna Station are re-viewed for concurrence by Quality Control and approved by the Ginna Station Superintendent or his designated repre-sentative. Procurement documents initiated in Engineer-ing are reviewed for concurrence by Quality Assurance and approved by the Chief Engineer or his designated represen-tative.
Evidence  of review  and approval  of procurement  documents is recorded  on  the documents or on the attached control IV-16              Revision    2 November 1, 1974
 
J' form. These documents are maintained  in Purchasing and plant records.
After purchase requisitions, service agreements, contracts, specifications, and drawings have received the required reviews an6 approvals, a purchase order is issued to a qualified supplier and controlled as described in Section IV.7. Under no circumstances are purchasing requirements altered (except for quantity or pricing) during order placement unless review and concurrence    is obtained  from those who were required to review, concur with, and approve
.the original documents as described above.
Engineering review of procurement documents includes verification of appropriate classifications, technical requirements,  and code application. Quality Assurance review of the above includes checks to verify that proper codes, regulatory requirements, and material specifications are invoked; that FSAR and Technical Supplement commit-ments are included; that appropriate acceptance or rejection criteria are required; and that quality assurance require-ments are incorporated., Quality Control reviews procure-ment documents for spare or replacement parts for adequacy IV-17              Revision  2 November 1, 1974
 
of quality requirements    and  to determine similarity,
~
compatibility, and the inclusion of the quality require-I ments and acceptance criteria of the original design.
Instructions, Procedures, and Drawin s I'Ve5 Each Rochester Gas and Electric organization is responsible for developing, reviewing, approving, and implementing procedures as required to implement the quality assurance program. These procedures   cover       activities such as document   control, training of personnel, and responsibilities and duties of -personnel. Quality Assurance reviews and f
concurs with these procedures.       Table IV.1-1 provides a summary of the subject matter contained in the procedures which are used to implement the quality assurance program.
Procurement documents require suppliers and contractors to, have appropriate   instructions, procedures, specifica-tions,   and drawings.
The Ginna   Station Superintendent is responsible for pre-paring, reviewing, approving, and implementing instructions and procedures associated with operation, maintenance, repair, refueling, and modification. 'This includes in-structions and procedures listed in USAEC Regulatory Guide 1.33 for administrative control; general plant operation; startup, operation, and shutdown of safety 4
IV-18                     Revision 2 November 1, 1974
 
I r
h
 
related systems; correction of abnormal, of fnormal, or alarm conditions; combat of emergencies and other sig-nificant events; radioactivity control; control of measuring and test equipment; chemical and radiochemical control; and fuel handling and refueling. He is responsible for the preparation and implementation of Quality Control Procedures. He is also responsible for the issuance of appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the com-pletion of plant modifications.
The Plant Operations Review Committee has the responsi-bility for reviewing procedures prior to their approval by the Ginna Station Superintendent as required by the Section 6.0, Technical Specifications.
Quality Control is responsible for reviewing plant administrative, operating, maintenance, repair, refueling, and modification procedures prior to use to assure quality assurance requirements are included.
The Chief Engineer is responsible for preparing, reviewing, approving and issuing specifications, drawings, and installation requirements associated with plant modifi-cations. These documents require those performing the work to obtain, understand, and comply with appropriate instructions, procedures, specifications and drawings.
IV-19               Revision 2 November 1, 1974
 
II l
    'N I
 
The Chief Engineer has established procedures .for
)
maintaining drawings and specifications in a current status. These procedures 'cover updating of as-built drawings after plant modifications and   the revision, approval, distribution, and control of all drawings and specifications.
Quality Assurance reviews design criteria and specifi-cations', and changes thereto, for concurrence with quality assurance requirements.
Station Quality Control Procedures require the review and concurrence of Quality Assurance and the approval of the Ginna Station Superintendent.
Station Quality Control Procedures require the review and concurrence of Quality Assurance and the approval of the Ginna Station Superintendent.
Persons preparing and approving documents are responsible for assuring that specifications, instructions, procedures, and drawings include appropriate quantitative or quali-tative acceptance criteria for determining that important activities have been satisfactorily accomplished and assuring that the documents are kept current.Surveillance of the implementation of instructions, drawings, and procedures for operation, maintenance, repair, modification, and re'fueling is the responsibility of the Ginna Station Quality Control Engineer.IV-20 Revision 2 November l, l974 4
Persons preparing and approving documents are responsible for assuring that specifications, instructions, procedures, and drawings include appropriate quantitative or quali-tative acceptance criteria for determining that important activities have been satisfactorily accomplished and assuring that the documents are kept current.
Document Control Procedures are established to control the issuance of procedures, instructions, drawings, and specifications.
Surveillance of the implementation of instructions, drawings, and procedures for operation, maintenance, repair, modification, and re'fueling is the responsibility of the Ginna Station Quality Control Engineer.
Standard document control requirements are contained in the Quality Assurance Manual.The Ginna Station Super-intendent is responsible for the control of all documents issued at Ginna Station.Engineering controls all docu-ments issued by Engineering, Quality Assurance, and Purchasing.
IV-20               Revision 2 November l, l974
Engineering and Operations have separate procedures to control documents in accordance with the requirements of the Quality Assurance Manual.The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of docu-ment involved, its importance to safety, and'the intended use of the document.It specifies the types of documents which must, be controlled; identifies the difference between controlled and uncontrolled copies of the same document;includes the method for identifying holders of controlled copies;requires that only controlled copies of a document be used for official purposes;requires that lists of effective revisions be issued periodically; requires lists of document holders to be maintained by the distributors; and requires that distributors transmit controlled docu-ments using approved forms internally and externally.
 
Revision 2 November 1, 1974  
4 Document Control Procedures   are established to control the issuance of procedures, instructions, drawings, and specifications.
Standard document control requirements are contained in the Quality Assurance Manual. The Ginna Station Super-intendent is responsible for the control of all documents issued at Ginna Station. Engineering controls all docu-ments issued by Engineering, Quality Assurance, and Purchasing. Engineering and Operations have separate procedures to control documents in accordance with the requirements of the Quality Assurance Manual.
The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of docu-ment involved, its importance to safety, and'the intended use of the document.     It specifies the types of documents which must, be controlled; identifies the difference between controlled and uncontrolled copies of the same document; includes the method for identifying holders of controlled copies; requires that only controlled copies of a document be used for official purposes; requires that lists of effective revisions be issued periodically; requires lists of document holders to be maintained by the distributors; and requires that distributors transmit controlled docu-ments using approved forms internally and externally.
Revision 2 November 1, 1974
 
Types  of documents which are controlled include Tech-nical Specifications, FSAR, Technical Supplements, Quality Assurance Manual, procedures (such as, quality assurance,  engineering, purchasing, repair, maintenance, test, calibration, fuel handling, modification, and administrative), specifications and drawings. Suppliers of materials, equipment, and services are required in
'rocurement documents to provide for control of documents, including manufacturing inspection and testing instructions.
The  Quality Assurance Manual further requires that each organization provide in its procedures for measures: to assure that documents are available when required; to properly review and approve documents such as procedures, instructions, specifications, and drawings; to provide the same reviews and approvals for changes to documents as was required of the original document; to require that organizations which review and approve documents have to pertinent information and adequate knowledge 'ccess of the original document intent; to assure that approved changes are promptly transmitted for incorporation into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.
Quality Assurance    and Quality Control are responsible for review and concurrence of procurement documents and, therefore, procurement document control requirements.
IV-22              Revision  2 November 1, 1974
 
Quality Assurance and Quality Control are further responsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate  systems are implemented.
Control of Purchased Naterial,    E ui ment, and Services Procurement documents, supplier selection, supplier 0
surveillance, and receipt inspection are the four major means used in controlling purchased material, equipment, components,  and services. All procurement is conducted in accordance with procurement documents as stated in Section IV-4. All reviews, inspections, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier: is capable of providing acceptable, quality products.
Suppliers must be on an approved suppliers'ist prior to being issued a purchase order. Supplier evaluations are performed by Quality Assurance, Engineering, Purchasing, and/or Ginna Station, as necessary, for the item or service involved. The depth of the supplier evaluation varies depending on the complexity and importance to safety of the item involved. For example, for mass produced or off-the-shelf items, only  a check  of past performance may be necessary. On the other hand, for complex, important. items a very thorough review is performed.
IV-23                Revision  2 November 1, 1974
 
Engineering  is responsible for evaluating the overall design or manufacturing capability of the supplier in-eluding his particular technical ability to produce the design, service, item, or component delineated in the procurement documents. As part of this review, the supplier's design capabilities, machinery capabil-ities,  handling capabilities, testing    facilities,  service capabilities,  and exPerience  are reviewed.
Quality Assurance is responsible for evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and  Electric Requirements. The review includes consideration of: company organization, quality assurance personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices,,acceptance criteria, required quality assurance records and their retention, and quality assurance requirements and controls I
imposed by the    supplier on  his subcontractors.      Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assurance requirements.
IV-24                  Revision  2 November 1, 1974
 
1 Ginna Station  qualifies suppliers of inspection, test, and calibration services and the suppliers of spare and replacement parts if the procurement is of the identical part from the original supplier.
2 Quality Assurance, Engineering, and Ginna Station document their supplier evaluation results in reports which discuss areas investigated, findings, and con-clusions. As 'applicable, concurrence of Purchasing, Engineering, Ginna Station, and Quality Assurance is required to place a supplier on the qualified suppliers'ist.
One organization can remove a supplier from the list without concurrence of the others.
Quality Assurance is responsible for determining and documenting the degree of supplier surveillance (including review, inspection, or audit) required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance. The objective of supplier surveillance is to provide a sampling review of the supplier's quality assurance program implementation and  of'roduct  conformance with respect to the purchase order requirements. For complex equipment and designs, Quality Assurance and IV-25              Revision            2 November 1, 1974
 
E.
h I'
 
Engineering are responsible for    joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.
The  results of the surveillance trip are documented by means of inspection sheets or trip reports which are distributed to the Quality Assurance Coordinator, the t
Purchasing Agent, the Chief Engineer, the Ginna Station Quality Control Engineer, and the Ginna Station Superin-tendent. When a deviation from purchase order require-ments is noted, the Quality Assurance representative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work,    if necessary.
The Ginna  Station Quality Control Engineer is responsible for surveillance of site contractors to assure that they meet. all technical and quality requirements. The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.
The Ginna  Station Superintendent, is responsible for receiving and storing materials, parts, and components.
Upon arrival, the plant storekeeper logs the item, places a "hold" tag on the item, and notifies Quality Control that the item has arrived.
IV-26              Revision 2 November 1, 1974
 
  't Al t '\ \ ~


Types of documents which are controlled include Tech-nical Specifications, FSAR, Technical Supplements, Quality Assurance Manual, procedures (such as, quality assurance, engineering, purchasing, repair, maintenance, test, calibration, fuel handling, modification, and administrative), specifications and drawings.Suppliers of materials, equipment, and services are required in'rocurement documents to provide for control of documents, including manufacturing inspection and testing instructions.
Quality Control is responsible for receipt inspection upon delivery at the plant of material, equipment, and associated services for operation, maintenance, repair, modifications, and refueling. This inspection includes the use of written procedures or checklists to verify that the material, equipment, and services conform to the procurement documents   (if this has not been performed by source inspections)  and that documentary evidence of con-formance is available at the plant prior to installation or use. Documentary evidence sufficient to identify the codes, standards, or specifications met by the purchased material, equipment, and services is retained. In the event a final source inspection is conducted prior to the arrival at the plant, Quality Control performs an in-spection for shipping damage or lost parts and a document check to assure that the required documentation has been reviewed and is complete. A receiving inspection checklist is completed for all items received to document the extent of the inspection performed, including the documents checked, h
The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to assure that documents are available when required;to properly review and approve documents such as procedures, instructions, specifications, and drawings;to provide the same reviews and approvals for changes to documents as was required of the original document;to require that organizations which review and approve documents have'ccess to pertinent information and adequate knowledge of the original document intent;to assure that approved changes are promptly transmitted for incorporation into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.Quality Assurance and Quality Control are responsible for review and concurrence of procurement documents and, therefore, procurement document control requirements.
and the inspection results.
IV-22 Revision 2 November 1, 1974
If the  item and documentation are adequate, Quality Control labels the item as "Accepted", files the documentation and, receipt inspection results, and returns the item to the station stockroom. If the item is nonconforming or the IV-27


Quality Assurance and Quality Control are further responsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.
f 4
Control of Purchased Naterial, E ui ment, and Services Procurement documents, supplier selection, supplier 0 surveillance, and receipt inspection are the four major means used in controlling purchased material, equipment, components, and services.All procurement is conducted in accordance with procurement documents as stated in Section IV-4.All reviews, inspections, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier: is capable of providing acceptable, quality products.Suppliers must be on an approved suppliers'ist prior to being issued a purchase order.Supplier evaluations are performed by Quality Assurance, Engineering, Purchasing, and/or Ginna Station, as necessary, for the item or service involved.The depth of the supplier evaluation varies depending on the complexity and importance to safety of the item involved.For example, for mass produced or off-the-shelf items, only a check of past performance may be necessary.
On the other hand, for complex, important.
items a very thorough review is performed.
IV-23 Revision 2 November 1, 1974


Engineering is responsible for evaluating the overall design or manufacturing capability of the supplier in-eluding his particular technical ability to produce the design, service, item, or component delineated in the procurement documents.
documentation   is incomplete, Quality Control initiates a material deficiency report. which is controlled in accordance with Section IV.15.
As part of this review, the supplier's design capabilities, machinery capabil-ities, handling capabilities, testing facilities, service capabilities, and exPerience are reviewed.Quality Assurance is responsible for evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric Requirements.
All items issued must bear an acceptance
The review includes consideration of: company organization, quality assurance personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices,,acceptance criteria, required quality assurance records and their retention, I and quality assurance requirements and controls imposed by the supplier on his subcontractors.
                              )
Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assurance requirements.
tag and have documentation to support the acceptability of the item.
IV-24 Revision 2 November 1, 1974 1
In the event, the traceability is lost or the documentation review is unsatisfactory, the item becomes nonconforming and may not be released for use.
Ginna Station qualifies suppliers of inspection, test, and calibration services and the suppliers of spare and replacement parts if the procurement is of the identical part from the original supplier.Quality Assurance, Engineering, and Ginna Station 2 document their supplier evaluation results in reports which discuss areas investigated, findings, and con-clusions.As'applicable, concurrence of Purchasing, Engineering, Ginna Station, and Quality Assurance is required to place a supplier on the qualified suppliers'ist.
Identification and Control of Materials, Parts, and Com onents The identification and control of materials, parts, and components is accomplished in accordance 'with written require-ments and applies   to material, parts, or components in any stage of fabrication, storage, or installation. Identi-fication and control requirements are established by either an existing procedure or requirements documents which are prepared during the planning stages of a project. The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports; specification of the degree of identification and control necessary; location and method of identification to preclude a degradation of the item's functional capability or quality; and the proper identification of materials, IV-28
One organization can remove a supplier from the list without concurrence of the others.Quality Assurance is responsible for determining and documenting the degree of supplier surveillance (including review, inspection, or audit)required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance.
The objective of supplier surveillance is to provide a sampling review of the supplier's quality assurance program implementation and of'roduct conformance with respect to the purchase order requirements.
For complex equipment and designs, Quality Assurance and IV-25 Revision 2 November 1, 1974 E.'h I' Engineering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.The results of the surveillance trip are documented by means of inspection sheets or trip reports which are distributed to the Quality Assurance Coordinator, the t Purchasing Agent, the Chief Engineer, the Ginna Station Quality Control Engineer, and the Ginna Station Superin-tendent.When a deviation from purchase order require-ments is noted, the Quality Assurance representative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work, if necessary.
The Ginna Station Quality Control Engineer is responsible for surveillance of site contractors to assure that they meet.all technical and quality requirements.
The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.
The Ginna Station Superintendent, is responsible for receiving and storing materials, parts, and components.
Upon arrival, the plant storekeeper logs the item, places a"hold" tag on the item, and notifies Quality Control that the item has arrived.IV-26 Revision 2 November 1, 1974
't Al t'\\~
Quality Control is responsible for receipt inspection upon delivery at the plant of material, equipment, and associated services for operation, maintenance, repair, modifications, and refueling.
This inspection includes the use of written procedures or checklists to verify that the material, equipment, and services conform to the procurement documents (if this has not been performed by source inspections) and that documentary evidence of con-formance is available at the plant prior to installation or use.Documentary evidence sufficient to identify the codes, standards, or specifications met by the purchased material, equipment, and services is retained.In the event a final source inspection is conducted prior to the arrival at the plant, Quality Control performs an in-spection for shipping damage or lost parts and a document check to assure that the required documentation has been reviewed and is complete.A receiving inspection checklist is completed for all items received to document the extent of the inspection performed, including the documents checked, h and the inspection results.If the item and documentation are adequate, Quality Control labels the item as"Accepted", files the documentation and, receipt inspection results, and returns the item to the station stockroom.
If the item is nonconforming or the IV-27 f 4 documentation is incomplete, Quality Control initiates a material deficiency report.which is controlled in accordance with Section IV.15.All items issued must bear an acceptance tag and have)documentation to support the acceptability of the item.In the event, the traceability is lost or the documentation review is unsatisfactory, the item becomes nonconforming and may not be released for use.Identification and Control of Materials, Parts, and Com onents The identification and control of materials, parts, and components is accomplished in accordance
'with written require-ments and applies to material, parts, or components in any stage of fabrication, storage, or installation.
Identi-fication and control requirements are established by either an existing procedure or requirements documents which are prepared during the planning stages of a project.The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports;specification of the degree of identification and control necessary; location and method of identification to preclude a degradation of the item's functional capability or quality;and the proper identification of materials, IV-28  


parts, and components prior to release for manufacturing, shipping, construction, and installation.
parts, and components prior to release for manufacturing, shipping, construction, and installation.
The Chief Engineer is responsible for assuring that specifications contain appropriate requirements for the identification and control of materials, parts, or components.
The Chief Engineer is responsible for assuring that specifications contain appropriate requirements for the identification   and control of materials, parts, or components. Suppliers are required to assur'e that all required documentation for an item is properly identified and related to the item. Each item is required to be physicall'y identified, either by marking on the item or by tags. Physical identification by purchase order number is used to the maximum extent possible for relating an item at any time to applicable documentation.     Identifi-cation is either on the item or records traceable to the item. Where physical identification is impractical, physical separation, procedural control, or other appro-priate   means are employed.
Suppliers are required to assur'e that all required documentation for an item is properly identified and related to the item.Each item is required to be physicall'y identified, either by marking on the item or by tags.Physical identification by purchase order number is used to the maximum extent possible for relating an item at any time to applicable documentation.
The Ginna   Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant. Procedures covering the identification and 5
Identifi-cation is either on the item or records traceable to the item.Where physical identification is impractical, physical separation, procedural control, or other appro-priate means are employed.The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant.Procedures covering the identification and 5 control of materials, parts, and components are prepared by Quality Control and approved by the Ginna Station Superintendent.
control of materials, parts, and components are prepared by Quality Control and approved by the Ginna Station Superintendent.
In the event that traceability is lost for a specific item, i;t is handled as nonconforming material and deviations IV-29 Revision 2 November 1, 1974  
In the event that traceability is lost for a specific item, i;t is handled as nonconforming material and deviations IV-29             Revision 2 November 1, 1974


and waivers are controlled and documented in accordance with Section IV.15.Control of S ecial Processes Written procedures are established to control special processes, such as welding, heat treating, and nondes-tructive examination to assure compliance with applicable codes, standards, and" design specifications.
and waivers are   controlled and documented in accordance with Section IV.15.
Qualifica-tion of personnel and procedures complies with the J requirements of applicable codes and standards.
Control of S ecial Processes Written procedures are established to control special processes, such as welding, heat treating, and nondes-tructive examination to assure compliance with applicable codes, standards, and" design specifications.     Qualifica-tion of personnel and procedures complies with the J
When special process qualification requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification require-'ments.The Chief Engineer and the Ginna Station Superintendent are responsible for requiring suppliers, in procurement.
requirements of applicable codes and standards.       When special process qualification requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification require-
documents, to control special processes in accordance with the above requirements.
'ments.
Quality Assurance and Quality Control are responsible for reviewing procurement documents to assure that requirements for control of special processes are included.Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Quality Assurance.
The Chief Engineer and the Ginna Station Superintendent are responsible   for requiring suppliers, in procurement.
Special process procedures submitted by suppliers and contractors are reviewed and approved by Quality Assurance.
documents, to control special processes in accordance with the above requirements. Quality Assurance   and Quality Control are responsible for reviewing procurement documents to assure that requirements for control of special processes are included.
IV-30 Revision 2 November 1, 1974  
Rochester   Gas and Electric procedures for special processes are prepared,   reviewed, and approved by Quality Assurance.
Special process procedures submitted by suppliers and contractors are reviewed   and approved by   Quality Assurance.
IV-30               Revision  2 November 1, 1974
 
The Ginna  Station Maintenance Engineer is responsible for assuring that personnel performing special processes under his cognizance are qualified and are using qualified procedures in accordance with applicable codes, specifi-cations, and standards. Quality Assurance is responsible for the qualification of welding and NDE personnel and procedures. Engineering maintains records for personnel and procedures    to demonstrate that, required qualifications have been obtained and are kept current.
Quality Assurance and Quality Control perform surveillance, inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.
Ins ection Procedures  prepared  for the control of plant activities include inspection requirements and hold points as re-quired by drawings, instructions, requirements documents, specifications, codes, standards, or regulatory require-ments. Instructions for conducting inspections are con-tained in Quality Control inspection procedures. These inspection procedures and all supporting specifications and drawings are provided to inspection personnel for use prior to performing the inspection. Inspection requirements and hold points are utilized to verify conformance of activities to the'ocumented instructions, IV-31                Revision 2 November 1, 1974
 
I specifications, and drawings for accomplishing the activity.
Quality Control inspection procedures include the identifi-cation of quality characteristics to be inspected, a des-cription of the method of inspection to be used, the identification of the organization responsible for per-forming the inspection, the acceptance and rejection
'criteria, the requirements for the recording of in-spection results, and the requirements for providing evidence of completion and certification of the 'in-spection activity. Inspections are performed by Quality Control personnel who are independent. of the personnel performing the work. Outside contractors are required by procurement documents  to  have and follow similar procedures and to use independent 'inspectors. In-spectors are sufficiently trained to adequately evaluate the activity they are inspecting.
Quality Control personnel are responsible for performing inspections, as required, during plant operation, main-tenance, repair, refueling, and modification when the work  is performed by Rochester Gas and Electric personnel.
When the work is performed by'outside,contractors, Quality Control is responsible for surveillance of the subcontractor's inspection 'activities. All inspection equipment is calibrated and controlled in accordance with Section IV.12. Calibration status is verified by inspection personnel prior to performing an inspection operation.
IV-32
 
In the event  an  inspection of processed material or products is impossible or impractical, indirect control by monitoring processing'ethods, equipment, and personnel is provided. Both inspection and process monitoring are required when control is inadequate without both.
, The  Chief Engineer is responsible for including inspec-tion requirements in engineering specifications.
Quality Assurance is responsible for assuring that adequate inspection requirements are included in engin-eering specifications and for establishing the require-ments for the inservice inspection program.
The Ginna  Station Quality Control Engineer is resp'onsible for assuring that adequate inspection requirements and hold points are included in operation, maintenance, repair, refueling, and modification procedures. He is also responsible for the assignment of qualified inspection personnel required for inspection of quality affecting activities and for coordinating the performance of and conducting the surveillance of inservice inspection.
IV-33            Revision 2 November 1, 1974


The Ginna Station Maintenance Engineer is responsible for assuring that personnel performing special processes under his cognizance are qualified and are using qualified procedures in accordance with applicable codes, specifi-cations, and standards.
0 The program    for inservice inspection of the reactor coolant system and other safety related systems is con-tained in Section 4.2, Technical Specifications.
Quality Assurance is responsible for the qualification of welding and NDE personnel and procedures.
Test Control Whenever  testing is required to demonstrate that a material, part, component, or system will perform satis-factorily in service, a test program is instituted employ-ing written and approved procedures which are in accordance with basic requirements established in Technical, Specifications, drawings, instructions, procurement documents, specifications, codes, standards, and regulatory requirements.     The test program requires the identification, control, and documentation of all tests, and the preparation of written procedures required for satisfactory accomplishment of the testing.
Engineering maintains records for personnel and procedures to demonstrate that, required qualifications have been obtained and are kept current.Quality Assurance and Quality Control perform surveillance, inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.
Written test procedures and checklists include: necessary test. equipment and calibration requirements; material requirements; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria; instructions for disposition of deviations; data collection requirements; and test xesult approval.
Ins ection Procedures prepared for the control of plant activities include inspection requirements and hold points as re-quired by drawings, instructions, requirements documents, specifications, codes, standards, or regulatory require-ments.Instructions for conducting inspections are con-tained in Quality Control inspection procedures.
t The Ginna  Station Superintendent is responsible for the station test program, including the surveillance test program required by Section 4.0, Technical Specifications.
These inspection procedures and all supporting specifications and drawings are provided to inspection personnel for use prior to performing the inspection.
Revision  2 IV-34              Yiovember 1, lg74
Inspection requirements and hold points are utilized to verify conformance of activities to the'ocumented instructions, IV-31 Revision 2 November 1, 1974 I
specifications, and drawings for accomplishing the activity.Quality Control inspection procedures include the identifi-cation of quality characteristics to be inspected, a des-cription of the method of inspection to be used, the identification of the organization responsible for per-forming the inspection, the acceptance and rejection'criteria, the requirements for the recording of in-spection results, and the requirements for providing evidence of completion and certification of the'in-spection activity.Inspections are performed by Quality Control personnel who are independent.
of the personnel performing the work.Outside contractors are required by procurement documents to have and follow similar procedures and to use independent
'inspectors.
In-spectors are sufficiently trained to adequately evaluate the activity they are inspecting.
Quality Control personnel are responsible for performing inspections, as required, during plant operation, main-tenance, repair, refueling, and modification when the work is performed by Rochester Gas and Electric personnel.
When the work is performed by'outside,contractors, Quality Control is responsible for surveillance of the subcontractor's inspection
'activities.
All inspection equipment is calibrated and controlled in accordance with Section IV.12.Calibration status is verified by inspection personnel prior to performing an inspection operation.
IV-32


In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing'ethods, equipment, and personnel is provided.Both inspection and process monitoring are required when control is inadequate without both., The Chief Engineer is responsible for including inspec-tion requirements in engineering specifications.
I Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Control,, and approved by the Ginna Station Super-intendent. The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved'procedures.
Quality Assurance is responsible for assuring that adequate inspection requirements are included in engin-eering specifications and for establishing the require-ments for the inservice inspection program.The Ginna Station Quality Control Engineer is resp'onsible for assuring that adequate inspection requirements and hold points are included in operation, maintenance, repair, refueling, and modification procedures.
When contractors are employed for tests, the contractor is required to perform testing in accordance with his quality assurance program requirements. All test results are required to be documented, reviewed, and approved by those responsible   for performing the test.
He is also responsible for the assignment of qualified inspection personnel required for inspection of quality affecting activities and for coordinating the performance of and conducting the surveillance of inservice inspection.
I z The Chief Engineer is responsible for assuring that required tests for modifications are required in engin-eering specifications. He is further responsible for providing engineering assistance to the Ginna Station staff in the preparation of modification-related test procedures. Engineering is responsible for reviewing     and approving modification-related test results.
IV-33 Revision 2 November 1, 1974 0
Control of Measurin     a and Test E ui     ment The   calibration and control system for measurin'g and test equipment includes calibration procedures, estab-lishment of calibration frequencies, and maintenance control requirements of measuring and test in-I'nd IV-35                 Revision 2 November 1, 1974
The program for inservice inspection of the reactor coolant system and other safety related systems is con-tained in Section 4.2, Technical Specifications.
Test Control Whenever testing is required to demonstrate that a material, part, component, or system will perform satis-factorily in service, a test program is instituted employ-ing written and approved procedures which are in accordance with basic requirements established in Technical, Specifications, drawings, instructions, procurement documents, specifications, codes, standards, and regulatory requirements.
The test program requires the identification, control, and documentation of all tests, and the preparation of written procedures required for satisfactory accomplishment of the testing.Written test procedures and checklists include: necessary test.equipment and calibration requirements; material requirements; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria;instructions for disposition of deviations; data collection requirements; and test xesult approval.t The Ginna Station Superintendent is responsible for the station test program, including the surveillance test program required by Section 4.0, Technical Specifications.
IV-34 Revision 2 Yiovember 1, lg74 I
Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Control,, and approved by the Ginna Station Super-intendent.
The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved'procedures.
When contractors are employed for tests, the contractor is required to perform testing in accordance with his quality assurance program requirements.
All test results are required to be documented, reviewed, and approved by those responsible for performing the test.I z The Chief Engineer is responsible for assuring that required tests for modifications are required in engin-eering specifications.
He is further responsible for providing engineering assistance to the Ginna Station staff in the preparation of modification-related test procedures.
Engineering is responsible for reviewing and approving modification-related test results.a Control of Measurin and Test E ui ment The calibration and control system for measurin'g and test equipment includes calibration procedures, estab-lishment of calibration frequencies, and maintenance I'nd control requirements of measuring and test in-IV-35 Revision 2 November 1, 1974  


struments, tools, gauges, shop standards, and nondes-tructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems, and structures.
struments, tools, gauges, shop standards,   and nondes-tructive test equipment which are to be used   in the measurement,   inspection, and monitoring of components, systems, and structures. Calibration procedures in-clude step-by-step methods for calibration and require-ments for instrument accuracy. Calibration frequency is based on required accuracy, degree of usage, stability characteristics, manufacturer's recommendations, ex-perience, and other conditions affecting measurement capability.
Calibration procedures in-clude step-by-step methods for calibration and require-ments for instrument accuracy.Calibration frequency is based on required accuracy, degree of usage, stability characteristics, manufacturer's recommendations, ex-perience, and other conditions affecting measurement capability.
Control of measuring and test equipment requires: a recall system assuring timely calibration of equipment; a syst'm providing unique identification, of equipment, traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing traceability of shop standards to nationally recognized standards (where national standards do not exist, procedures contain instructions to document the basis for calibration) and periodic revalidation of shop standards; a system providing for records to be maintained k
Control of measuring and test equipment requires: a recall system assuring timely calibration of equipment; a syst'm providing unique identification, of equipment, traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing traceability of shop standards to nationally recognized standards (where national standards do not exist, procedures contain instructions to document the basis for calibration) and periodic revalidation of shop standards; a system providing for records to be maintained k which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration 4 dates;and a system controlling the purchase requirements of ZV-36  
which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration 4
dates; and a system controlling the purchase requirements of ZV-36


new equipment to be entered into the calibration and control system including requirements for accuracy, stability, and repeatability under normal use conditions.
new equipment   to be entered into the calibration and control system including requirements for accuracy, stability, and repeatability under normal use conditions.
In the event a measuring instrument is found out of calibration, an investigation is conducted to determine the validity of previous measurements.
In the event a measuring instrument is found out of calibration, an investigation is conducted to determine the validity of previous measurements.
The Ginna Station Superintendent is responsible for the procedures and program required to assure control and calibration'of measuring and test equipment at Ginna Station in accordance with the above requirements.
The Ginna   Station Superintendent is responsible for the procedures and program required to assure control and calibration'of measuring and test equipment at Ginna Station in accordance with the above requirements. In-struments specified in Section 4.1, Technical 4
struments specified in Section 4.1, Technical In-4 Specifications, are included in the program.Tools, gauges, and instruments necessary for maintenance, in-spection, and test are calibrated and controlled in accordance with station procedures.
Specifications, are included in the program. Tools, gauges,   and instruments necessary for maintenance, in-spection, and test are calibrated and controlled in accordance with station procedures. Measuring, test, or inspection equipment used by Quality Control is included in the program.
Measuring, test, or inspection equipment used by Quality Control is included in the program.IV.13 Handlin , Stora e, and Shi in The Ginna Station Superintendent is responsible for develop-, ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located at Ginna Station.Under normal circumstances, manufacturer's specific written IV-37  
IV.13 Handlin   , Stora e, and Shi   in The Ginna   Station Superintendent is responsible for develop-,
ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located at Ginna Station. Under normal circumstances, manufacturer's specific written IV-37
 
instructions  and recommendations  and purchase  specifi-cation requirements are invoked for cleanliness, preservation, special handl'ing, and storage with respect to environmental requirements. In the absence of, or in addition to, specific manufacturer requirements, the superintendent may invoke additional requirements in accordance with the plant procedures.
The  Chief Engineer is responsible for specifying in pro-curement documents and in engineering specifications that written procedures    be used, as appropriate, for the handling, shipping, storage, cleaning, and preservation of materials and equipment procured for modifications.
These .procedures are prepared by contractors or by the
'station staff as appropriate. Rochester Gas and Electric'rocedures are reviewed and approved by Quality Control and the Ginna  Station Superintendent.
In the preparation of procurement documents, plant procedures, and contractor procedures, consideration of handling, ship-ping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of manufacturing and installation prior to operational accept-ance.
IV-38              Revision                  2 November 1, 1974
 
Quality Assurance is responsible for review of engineering specifications to assure that proper handling, storing, and shipping requirements have been specified.      Quality Control is responsible for surveillance of handling, stor-age, and shipping activities by suppliers, Rochester Gas and Electric personnel, and contractors.
Ins ection, Test, and 0 eratin Status Equipment. or systems not ready for normal service are clearly identified by use of tags, control logs, and other suitable means to indicate the status in a positive manner.
The identification is sufficient to positively indicate the status of the particular equipment or system being isolated.
The Ginna    Station Superintendent is responsible for indicating the status of operating equipment or systems to be removed from service for maintenance, repair, or modification in accordance with the approved Rochester Gas and    Electric Intra-Station  Holds;ng Rules. The Ginna Station Superintendent designates personnel      who have station holding authority.
Personnel who have station holding authority are'esponsible for directing the status change of equipment and systems in  accordance with the approved company    Intra-Station IV-39                Revision  2 November 1, 1974


instructions and recommendations and purchase specifi-cation requirements are invoked for cleanliness, preservation, special handl'ing, and storage with respect to environmental requirements.
Holding Rules. System  status is indicated through the use  of hold tags  and control logs.
In the absence of, or in addition to, specific manufacturer requirements, the superintendent may invoke additional requirements in accordance with the plant procedures.
Equipment or system inspection and     test status are indi-cated by use of    test tags, labels, or  work inspection and  test'tat'us sheets. Written procedures control the use  of hold tags, test tags, and labels. The procedures require the recording of the     name of the person placing and removing the tag.
The Chief Engineer is responsible for specifying in pro-curement documents and in engineering specifications that written procedures be used, as appropriate, for the handling, shipping, storage, cleaning, and preservation of materials and equipment procured for modifications.
Systems,   components, and equipment which are found  to be unacceptable    during or after testing are clearly identified.
These.procedures are prepared by contractors or by the'station staff as appropriate.
Fuel handling operations involving fuel assemblies      or other radioactive sources're identified and controlled by the, use of tags, stamps, or other suitable means.
Rochester Gas and Electric'rocedures are reviewed and approved by Quality Control and the Ginna Station Superintendent.
Plant maintenance, repair, or modification of components, systems, or structures utilizes a work inspection or test status sheet, to indicate acceptance or rejection for a particular component, system, or structure. Work inspection or test status sheets are prepared and maintained at a designated control location to indicate the status of work and the completion of required inspections and tests.
In the preparation of procurement documents, plant procedures, and contractor procedures, consideration of handling, ship-ping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of manufacturing and installation prior to operational accept-ance.IV-38 Revision 2 November 1, 1974
Quality Control monitors the status change activities for their compliance to approved procedures and assures jv-40


Quality Assurance is responsible for review of engineering specifications to assure that proper handling, storing, and shipping requirements have been specified.
0 that inspection results are properly logged. Quality I
Quality Control is responsible for surveillance of handling, stor-age, and shipping activities by suppliers, Rochester Gas and Electric personnel, and contractors.
Control also establishes the procedures for implementing the work inspection= or status sheets during maintenance, repair,  and modification.
Ins ection, Test, and 0 eratin Status Equipment.
Nonconformin  Materials," Parts, and Com onents Procedures are established for the control, evaluation and disposition of deficient material, parts, and components.
or systems not ready for normal service are clearly identified by use of tags, control logs, and other suitable means to indicate the status in a positive manner.The identification is sufficient to positively indicate the status of the particular equipment or system being isolated.The Ginna Station Superintendent is responsible for indicating the status of operating equipment or systems to be removed from service for maintenance, repair, or modification in accordance with the approved Rochester Gas and Electric Intra-Station Holds;ng Rules.The Ginna Station Superintendent designates personnel who have station holding authority.
Materials, parts, or components which do not conform to drawing or specification requirements are identified with a hold 'tag and reported on a material deficiency report.
Personnel who have station holding authority are'esponsible for directing the status change of equipment and systems in accordance with the approved company Intra-Station IV-39 Revision 2 November 1, 1974
Quality Control 'is responsible for issuing material deficiency reports, recommending disposition, .initiating repair or rework, and inspecting and approving repaired or reworked items.'rior to installation or use, non-conforming items remain in a Quality Control receiving inspection area until approved disposition has been received.
After installation or use, nonconforming items are identified until approved disposition has been received.
Prior to installation or use, suppliers are notified of all nonconforming items and requested to recommend dis-position. Purchasing is responsible for obtaining the recommended disposition from the supplier. Engineering is responsible for reviewing and approving supplier's recommended disposition. After installation or use, Engineering is responsible for determining and approving disposition of nonconforming items.


Holding Rules.System status is indicated through the use of hold tags and control logs.Equipment or system inspection and test status are indi-cated by use of test tags, labels, or work inspection and test'tat'us sheets.Written procedures control the use of hold tags, test tags, and labels.The procedures require the recording of the name of the person placing and removing the tag.Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.
4 Items are repaired or reworked only   in accordance with documented procedures   and drawings prepared and approved by Engineering. Quality Control assures that and drawings are available for use prior to approved'rocedures the repaix or rework and reinspects all repaired or reworked items. The repair or rework must be verified as acceptable by an inspection of the affected item which is at least equal to the original inspection method.
Fuel handling operations involving fuel assemblies or other radioactive sources're identified and controlled by the, use of tags, stamps, or other suitable means.Plant maintenance, repair, or modification of components, systems, or structures utilizes a work inspection or test status sheet, to indicate acceptance or rejection for a particular component, system, or structure.
Items which are accepted   for use with a known deficiency are fully documented with the specification requirement, justification for acceptance, and affect of such use.
Work inspection or test status sheets are prepared and maintained at a designated control location to indicate the status of work and the completion of required inspections and tests.Quality Control monitors the status change activities for their compliance to approved procedures and assures jv-40 0
All such items are approved prior to use by the Vice President, Electric and Steam Production.
that inspection results are properly logged.Quality I Control also establishes the procedures for implementing the work inspection=
Quality Control issues monthly material deficiency report summaries which are reviewed and analyzed by Quality Assurance. Unsatisfactory trends are reported to manage-ment by means of the corrective action report in accor-dance with Section IV.16.
or status sheets during maintenance, repair, and modification.
IV.16 Corrective Action Quality Assurance establishes the requirements for identification, review and correction of conditions adverse to quality. Conditions adverse to quality, IV-42             Revision               2 November 1, 1974
Nonconformin Materials," Parts, and Com onents Procedures are established for the control, evaluation and disposition of deficient material, parts, and components.
Materials, parts, or components which do not conform to drawing or specification requirements are identified with a hold'tag and reported on a material deficiency report.Quality Control'is responsible for issuing material deficiency reports, recommending disposition,.initiating repair or rework, and inspecting and approving repaired or reworked items.'rior to installation or use, non-conforming items remain in a Quality Control receiving inspection area until approved disposition has been received.After installation or use, nonconforming items are identified until approved disposition has been received.Prior to installation or use, suppliers are notified of all nonconforming items and requested to recommend dis-position.Purchasing is responsible for obtaining the recommended disposition from the supplier.Engineering is responsible for reviewing and approving supplier's recommended disposition.
After installation or use, Engineering is responsible for determining and approving disposition of nonconforming items.
4 Items are repaired or reworked only in accordance with documented procedures and drawings prepared and approved by Engineering.
Quality Control assures that approved'rocedures and drawings are available for use prior to the repaix or rework and reinspects all repaired or reworked items.The repair or rework must be verified as acceptable by an inspection of the affected item which is at least equal to the original inspection method.Items which are accepted for use with a known deficiency are fully documented with the specification requirement, justification for acceptance, and affect of such use.All such items are approved prior to use by the Vice President, Electric and Steam Production.
Quality Control issues monthly material deficiency report summaries which are reviewed and analyzed by Quality Assurance.
Unsatisfactory trends are reported to manage-ment by means of the corrective action report in accor-dance with Section IV.16.IV.16 Corrective Action Quality Assurance establishes the requirements for identification, review and correction of conditions adverse to quality.Conditions adverse to quality, IV-42 Revision 2 November 1, 1974  


such as, failures, malfunctions, deficiencies, deviations, defective material and equipment, and nonconformances are reported on a corrective action report.Conditions adverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high maintenance items, and operating procedure deficiencies.
such as, failures, malfunctions, deficiencies, deviations, defective material and equipment, and nonconformances are reported on a corrective action report. Conditions adverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high maintenance items, and operating procedure deficiencies.
The corrective action report identifies the condition, the cause of the condition, and the corrective action taken.Corrective action reports may be initiated by Quality Assurance, Engineering, Ginna Station, or Purchasing staff personnel.
The corrective action report identifies the condition, the cause of the condition, and the corrective action taken.
Corrective action reports initiated't Ginna Station are submitted to Quality Control for review and subsequent processing.
Corrective action reports may be initiated by Quality Assurance, Engineering, Ginna Station, or Purchasing staff personnel. Corrective action reports initiated't Ginna Station are submitted to Quality Control for review and subsequent processing. Corrective action reports initiated by Engineering and Purchasing are reviewed and processed by Quality Assurance.
Corrective action reports initiated by Engineering and Purchasing are reviewed and processed by Quality Assurance.
When a condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect of continuing the activity. If continuing the activity would cover up e
When a condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect of continuing the activity.If continuing the activity would cover up e or preclude identification and correction of the deficiency, continuing the activity would increase the extent of the deficiency or lead to an unsafe condition, stop work action is taken.The Ginna Station Quality Control Engineer has authority to stop work on maintenance, repair, refueling, or modification deficiencies.
or preclude identification and correction of the deficiency, continuing the activity would increase the extent of the deficiency or lead to an unsafe condition, stop work action is taken. The Ginna Station Quality Control Engineer has authority to stop work on maintenance, repair, refueling, or modification deficiencies. The Ginna Station Quality Revision 2 November 1, 1974 IV-43
The Ginna Station Quality IV-43 Revision 2 November 1, 1974  


Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.
Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.
The Plant Operations Review Committee reviews all corr-ective action reports initiated at Ginna Station and h recommends interim corrective action if the action does not represent a change in configuration of the deficient item.The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating 8 procedures.
The Plant Operations Review Committee reviews all corr-ective action reports initiated at Ginna Station and   h recommends interim corrective action   if the action does not represent a change in configuration of the deficient item. The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating   8 procedures.
Conditions, adverse to quality which involve design defici-encies or a recommended corrective action which involves a design change are reviewed by Engineering.
Conditions, adverse to quality which involve design     defici-encies or   a recommended corrective action which involves   a design change are reviewed by Engineering.       Engineering determines the cause of the condition and recommends corrective action to preclude repetition.
Engineering determines the cause of the condition and recommends corrective action to preclude repetition.
Quality Assurance reviews all corrective action reports
Quality Assurance reviews all corrective action reports ,to assure that the cause of the condition has been deter-mined and that corrective action has been taken to preclude repetition.
  ,to assure that the cause of the condition has been deter-mined and that corrective action has been taken to preclude repetition. Quality Assurance also reviews material deficiency report summaries for unsatisfactory trends and initiates a corrective action report       if s'uch
Quality Assurance also reviews material deficiency report summaries for unsatisfactory trends and initiates a corrective action report if s'uch~a trend occurs.Completed corrective action reports are submitted to the Vice President, Electric and Steam Production to keep him aware of significant conditions adverse to quality.IV-44 ,Revision 2 November 1, l974  
~
~l r 0 Qualit Assurance Records Quality Assurance is responsible for establishing the basic requirements for quality assurance record retention and maintenance.
a trend occurs.
The Ginna Station Superintendent is responsible for the retention and maintenance of plant records.Records of Engineering and Quality Assurance activities are retained and maintained by Engineering.
Completed   corrective action reports are submitted to the Vice President, Electric and Steam Production to keep him aware of significant conditions adverse to quality.
Purchasing is responsible for maintaining Purchasing records.Each organization is responsible for preparation, review, approval, and implementation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements.
IV-44               ,Revision 2 November 1, l974
The records which fall within quality assurance record requirements include those records required by Section 6.5 of the Technical Speci-fications, the quality assurance program, and procurement documents.
 
All documents and records associated with the operation, maintenance, repair, refueling, and modification of structures, systems and components covered by the quality assurance program are included.Plant records include operating logs;the results of inspec-tions, tests, audits, and the monitoring of plant activities; drawings, specifications, procurement documents and material analyses;calibration procedures and reports;and nonforming and corrective action reports.Records of the qualification of personnel, procedures, and equipment for special processes IV-45 Revision 2 November 1, 1974  
~l r
0
 
Qualit Assurance Records Quality Assurance is responsible for establishing the basic requirements for quality assurance record retention and maintenance. The Ginna Station Superintendent is responsible for the retention and maintenance of plant records. Records of Engineering and Quality Assurance activities are retained and maintained by Engineering.
Purchasing   is responsible for maintaining Purchasing records. Each organization is responsible for preparation, review, approval, and implementation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements. The records which fall within quality assurance record requirements include those records required by Section 6.5 of the Technical Speci-fications, the quality   assurance program, and procurement documents. All documents   and records associated with the operation, maintenance,   repair, refueling,   and modification of structures, systems   and components   covered by the quality assurance program are included.
Plant records include operating logs; the results of inspec-tions, tests, audits, and the monitoring of plant activities; drawings, specifications, procurement documents and material analyses; calibration procedures and reports; and nonforming and corrective action reports.     Records of the qualification of personnel, procedures, and equipment for special processes IV-45                 Revision 2 November 1, 1974


and the results of reviews are maintained by Engineering.
and the results of reviews are maintained by Engineering.
Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.
The requirements and responsibilities for record accessa-bility and transmittal are in accordance with document control procedures as described in Section IV.6.Require-ments and responsibilities for preparation, inspection, identification, review, storage, retrieval, maintenanceg and the retention of quality assurance records are in accordance with applicable quality assurance record pro-cedures, codes,-standards, and procurement documents.
The requirements and responsibilities for record accessa-bility and   transmittal are in accordance with document control procedures as described in Section IV.6. Require-ments and responsibilities for preparation, inspection, identification, review, storage, retrieval, maintenanceg and the retention of quality assurance records are in accordance with applicable quality assurance record pro-cedures,   codes,-standards,   and procurement documents.
Records are available to authorized personnel.
Records are   available to authorized personnel. Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible document control activity.
Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible document control activity.are designed to prevent destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept IV-46 Revision 2 November 1, 1974  
are designed to prevent destruction of records through fire, flooding, theft,   and deterioration by temperature or humidity conditions; or, duplicate records are kept IV-46               Revision 2 November 1, 1974
 
in  two separate  storage locations in separate buildings which are physically isolated from each other.
Record keeping procedures    provide for receiving, clas-sifying, indexing, labeling, and preparing records for storage. The procedures establish retention requirements, accessability, control of obsolete record destruction, and  control for issuance    and return of all records.
The Ginna  Station Superintendent is responsible for maintaining plant operating records as required in Section 6.5, Technical Specifications.
Engineering is responsible for maintaining design records, such as specifications, drawings, design review reports,  and design  control documentation; quality assurance records, such as audit reports and vendor surveillance reports; and purchasing records, such as supplier qualifi-cations, supplier surveillance reports, bid evaluations, and purchase requi.sitions.
Audits Compliance with  all  aspects of the  quality assurance program and the effectiveness of the program is deter-mined by audits of all organizations performing quality affecting activities. Quality Assurance is responsible for conducting audits of each organization involved in the IV-47                Revision  2 November 1, 1974
 
quality assurance program on a planned, periodic basis.
Audit. intervals are based on the status and safety importance of activities being performed.
Audits of Ginna Station, Engineering and Purchasing organizations are performed annually. Table XV.18-1 is a list of the activities to be audited in each of the organizations. Audit frequencies are based on the level of activity in each area. Audit schedules are established to assure that each activity is audited at least annually.
Additional audits are conducted as required by special conditions or circumstances.
Each  audit requires the development of an audit plan to provide information about, the audit, such as the functional area's -to be audited, the names and assignments of those who will perform the audit," the scheduling arrangements, and the method of reporting findings and recommendations.
The audits are performed in accordance with written pro-cedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.
Audit results are documented and reported to the person having supervisory responsibility in the area audited, the a Vice President, Electric and Steam Production, and the IV-48              Revision 2 November 1, 1974
 
Nuclear Safety Audit, and Review Board. Within  a specified period of time, the person having supervisory 'responsibility in the area audited is required to review the audit results, take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.
Quality Assurance is responsible for developing audit plans and audit checklists, designating and training audit personnel, and conducting audits.
Audits may be conducted by Quality Assurance engineers or other qualified .personnel, such as technical specialists from other company departments and outside consultants.=
Audits of major contractors, subcontractors, and sup-pliers are conducted during the early stages of design and procurement, as required, to evaluate their quality assurance  program'or compliance with    all aspects of the procurement documents. Audits are conducted, as re-quired, to assure that major contractors, subcontractorsg and  suppliers are auditing their  suppliers'uality assurance  programs  in accordance with procurement documents;    During the project, additional audits are performed, as required, to assure    all quality assurance program requirements  are properly implemented  in accordance with procurement. documents.
XV-49                Revision 2 November 1, 1974


in two separate storage locations in separate buildings which are physically isolated from each other.Record keeping procedures provide for receiving, clas-sifying, indexing, labeling, and preparing records for storage.The procedures establish retention requirements, accessability, control of obsolete record destruction, and control for issuance and return of all records.The Ginna Station Superintendent is responsible for maintaining plant operating records as required in Section 6.5, Technical Specifications.
a Quality Assurance performs regular analyses of audit results to evaluate quality trends. Results of these analyses will be provided to management for their regular review'.
Engineering is responsible for maintaining design records, such as specifications, drawings, design review reports, and design control documentation; quality assurance records, such as audit reports and vendor surveillance reports;and purchasing records, such as supplier qualifi-cations, supplier surveillance reports, bid evaluations, and purchase requi.sitions.
IV-50                Revision 2 November 1, 1974
Audits Compliance with all aspects of the quality assurance program and the effectiveness of the program is deter-mined by audits of all organizations performing quality affecting activities.
Quality Assurance is responsible for conducting audits of each organization involved in the IV-47 Revision 2 November 1, 1974  


quality assurance program on a planned, periodic basis.Audit.intervals are based on the status and safety importance of activities being performed.
Table IV.l-l Quality Assurance Program Procedures Subject Listing Qualit Assurance Procedures                    Appendix  B Criteria Indoctrination of Qualit Assurance  and Su  ervzsor  Personnel The purpose  of this procedure is to provide the instruc-tions for indoctrination of Quality Assurance and super-visory personnel in quality assurance policies, manuals, and procedures.
Audits of Ginna Station, Engineering and Purchasing organizations are performed annually.Table XV.18-1 is a list of the activities to be audited in each of the organizations.
Trainin .of Qualit Assurance Grou Personnel H
Audit frequencies are based on the level of activity in each area.Audit schedules are established to assure that each activity is audited at least annually.Additional audits are conducted as required by special conditions or circumstances.
The purpose of this procedure is to provide the instruc-I tions for training of the Quality Assurance Group in quality assurance policies, manuals, and procedures.
Each audit requires the development of an audit plan to provide information about, the audit, such as the functional area's-to be audited, the names and assignments of those who will perform the audit," the scheduling arrangements, and the method of reporting findings and recommendations.
Mana ement Review of Qualit Assurance Pro ram This procedure describes how management reviews of the quality assurance program are conducted. This includes how management level audits are conducted, what reports are submitted to management for review, and how manage-ment comments are incorporated into the program.
The audits are performed in accordance with written pro-cedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.Audit results are documented and reported to the person having supervisory responsibility in the area audited, the a Vice President, Electric and Steam Production, and the IV-48 Revision 2 November 1, 1974
ax  Periodic Review of Qualit Assurance Procedures 0 8 e r. This procedure provides the instructions necessary for the periodic review of Rochester Gas and Electric 8 o  Corporation Quality Assurance Procedures.


Nuclear Safety Audit, and Review Board.Within a specified period of time, the person having supervisory
Table  IV.l-l (cont'd)
'responsibility in the area audited is required to review the audit results, take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.Quality Assurance is responsible for developing audit plans and audit checklists, designating and training audit personnel, and conducting audits.Audits may be conducted by Quality Assurance engineers or other qualified.personnel, such as technical specialists from other company departments and outside consultants.=
Qualit Assurance Procedures    (cont'd)                  Appendix  B Criteria Qualit Assurance Grou Or anization and Res onsibilities The purpose of this procedure is to describe the Rochester Gas and Electric quality assurance organization and the responsibilities within the organization.
Audits of major contractors, subcontractors, and sup-pliers are conducted during the early stages of design and procurement, as required, to evaluate their quality assurance program'or compliance with all aspects of the procurement documents.
Qualit Assurance Review of Rochester Gas and Electric Desi n  Criteria e
Audits are conducted, as re-quired, to assure that major contractors, subcontractorsg and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents; During the project, additional audits are performed, as required, to assure all quality assurance program requirements are properly implemented in accordance with procurement.
The purpose  of this procedure is to provide the instruc-tions necessary for quality assurance review of Rochester Gas and   Electric design criteria.
documents.
H I
XV-49 Revision 2 November 1, 1974
Vl Qualit Assurance Review of Rochester      Gas and  Electric tV  En sneer>.n  S eca.fxcatzons-The purpose  of this procedure is to provide the instruc-tions necessary for quality assurance review of Rochester Gas and  Electric engineering specifications.
Qualit Assurance    Review of Architect En ineer's Desi    n Documents This procedure provides instructions for quality assurance R X o 6 review of design criteria, specifications, and related
    ~
documents prepared by an architect engineer.      This review is performed when design criteria and/or specifications      are s o    submitted for Rochester Gas and Electric review and comment as a result of a procurement document requirements.


a Quality Assurance performs regular analyses of audit results to evaluate quality trends.Results of these analyses will be provided to management for their regular review'.IV-50 Revision 2 November 1, 1974
I I
    /


Table IV.l-l Quality Assurance Program Procedures Subject Listing Qualit Assurance Procedures Appendix B Criteria Indoctrination of Qualit Assurance and Su ervzsor Personnel The purpose of this procedure is to provide the instruc-tions for indoctrination of Quality Assurance and super-visory personnel in quality assurance policies, manuals, and procedures.
Table IV. 1-1 (cont ')
H I Trainin.of Qualit Assurance Grou Personnel The purpose of this procedure is to provide the instruc-tions for training of the Quality Assurance Group in quality assurance policies, manuals, and procedures.
Qualit Assurance Procedures     (cont'd)            Appendix B Criteria Re  uisitionin Qualit     Assurance Services                      IV This procedure describes the requirements to be met in the preparation, review and approval of purchase requisitions for services procured by Quality Assurance.
Mana ement Review of Qualit Assurance Pro ram This procedure describes how management reviews of the quality assurance program are conducted.
Qualit Assurance Review of Rochester Gas and Electric            IV Procurement Documents The purpose   of this procedure is to provide instructions for quality   assurance review of Rochester Gas and Electric procurement documents and release of Purchase Requisitions H  and Nuclear Procurement    Control Forms (QA-07) prepared by I
This includes how management level audits are conducted, what reports are submitted to management for review, and how manage-ment comments are incorporated into the program.ax 0 8 e r.8 o Periodic Review of Qualit Assurance Procedures This procedure provides the instructions necessary for the periodic review of Rochester Gas and Electric Corporation Quality Assurance Procedures.  
other departments..
Pre  aration,  Review and A  royal of Rochester  Gas and       IV Electric  Q.A. S ecifications The purpose of this procedure is to establish the methods required for preparation, review, approval, issuance, and revision of Rochester Gas and Electric Quality Assurance Specifications.
Quality Assurance specifications establish the Quality Assurance program requirements imposed;on suppliers of 0 8  'safety related equipment, and services.
8 V 8 0


Table IV.l-l (cont'd)Qualit Assurance Procedures (cont'd)Appendix B Criteria Qualit Assurance Grou Or anization and Res onsibilities The purpose of this procedure is to describe the Rochester Gas and Electric quality assurance organization and the responsibilities within the organization.
Table IV.l-l (cont'd)
H I Vl tV Qualit Assurance Review of Rochester Gas and Electric Desi n Criteria e The purpose of this procedure is to provide the instruc-tions necessary for quality assurance review of Rochester Gas and Electric design criteria.Qualit Assurance Review of Rochester Gas and Electric En sneer>.n S eca.fxcatzons-The purpose of this procedure is to provide the instruc-tions necessary for quality assurance review of Rochester Gas and Electric engineering specifications.
Qualit Assurance Procedures   (cont'd)             Appendix B Criteria F
Qualit Assurance Review of Architect En ineer's Desi n Documents R X o 6 s o This procedure provides instructions for quality assurance review of design criteria, specifications, and related~documents prepared by an architect engineer.This review is performed when design criteria and/or specifications are submitted for Rochester Gas and Electric review and comment as a result of a procurement document requirements.
Pre aration, Review and A    roval of Ginna Station Qualit Assurance Manual The purpose of this procedure is to provide the instruc-tions necessary for the preparation, review and approval, of changes to the Ginna Station Quality Assurance Manual.
I I/
Pre aration, Review and A royal of Qualit Assurance Procedures This procedure provides the instructions for preparation, review and approval of the Rochester Gas and Electric Corporation Quality Assurance Procedures.
Table IV.1-1 (cont')Qualit Assurance Procedures (cont'd)Appendix B Criteria Re uisitionin Qualit Assurance Services IV This procedure describes the requirements to be met in the preparation, review and approval of purchase requisitions for services procured by Quality Assurance.
    . Review of Qualit Control,    Qualit Assurance,     En ineerin    VI and Purchasxn  Procedures The purpose of this procedure is to establish the require-ments  for the review and approval of all quality and safety related documents generated by the Rochester Gas and Electric Company in accordance with the requirements of the RG&E Quality Assurance Manual.
Qualit Assurance Review of Rochester Gas and Electric Procurement Documents IV H I The purpose of this procedure is to provide instructions for quality assurance review of Rochester Gas and Electric procurement documents and release of Purchase Requisitions and Nuclear Procurement Control Forms (QA-07)prepared by other departments..
Pre aration, Review and A royal of Procedure Deviation            VI Re uests b Qualit Assurance This procedure provides the instructions for preparing, reviewing and approving a deviation from an approved Quality Assurance Procedure for (1) a specified period r rv
Pre aration, Review and A royal of Rochester Gas and Electric Q.A.S ecifications IV The purpose of this procedure is to establish the methods required for preparation, review, approval, issuance, and revision of Rochester Gas and Electric Quality Assurance Specifications.
0 8 8 V 8 0 Quality Assurance specifications establish the Quality Assurance program requirements imposed;on suppliers of'safety related equipment, and services.


Table IV.l-l (cont'd)Qualit Assurance Procedures (cont'd)F Pre aration, Review and A roval of Ginna Station Qualit Assurance Manual Appendix B Criteria The purpose of this procedure is to provide the instruc-tions necessary for the preparation, review and approval, of changes to the Ginna Station Quality Assurance Manual.Pre aration, Review and A royal of Qualit Assurance Procedures This procedure provides the instructions for preparation, review and approval of the Rochester Gas and Electric Corporation Quality Assurance Procedures.
Table       IV.l-l (cont'd)
.Review of Qualit Control, Qualit Assurance, En ineerin and Purchasxn Procedures VI The purpose of this procedure is to establish the require-ments for the review and approval of all quality and safety related documents generated by the Rochester Gas and Electric Company in accordance with the requirements of the RG&E Quality Assurance Manual.Pre aration, Review and A royal of Procedure Deviation Re uests b Qualit Assurance VI This procedure provides the instructions for preparing, reviewing and approving a deviation from an approved Quality Assurance Procedure for (1)a specified period r rv
Qualit Assurance Procedures'(cont'd)                       Appendix B Criteria time or    activity, or (2) in advance of the formal release of  a  revision to the subject procedure, or -of a new pro-cedure which would eliminate the need for such a deviation.
Qualification of Su liers                                                VII This procedure describes the requirements for evaluation and qualification of supplier          by Quality Assurance.
Su    lier  Surveillance                                                VII H  This procedure establishes the requirements for the evalua-tion of the quality assurance program:controlling the I
Vl Vl operations of suppliers of safety related part's, materials, components, structures or systems to the Rochester Gas &
Electric Corporation.
J Qualit Assurance          Review of Architect  En ineer's Bid        VII Selection This procedure provides the basis and requirements for Quality Assurance Review of the Architect  Engineer's Bid Selection.
Qualit Assurance           Review of Architect  En ineer's Bidders    VII w4 0 8  List I r.        procedure provides the requirement for quality assurance 4'his review and approval of the Architect  Engineer's Bidders List.


Table IV.l-l (cont'd)Qualit Assurance Procedures'(cont'd)
                'able IV.l-l (cont'd)
Appendix B Criteria time or activity, or (2)in advance of the formal release of a revision to the subject procedure, or-of a new pro-cedure which would eliminate the need for such a deviation.
Qualit Assurance Procedures   (cont'd)         Appendix B Criteria Weldin  Procedures                                          IX The purpose of this procedure is to identify the process by which welding procedures shall be designed.
Qualification of Su liers VII This procedure describes the requirements for evaluation and qualification of supplier by Quality Assurance.
Weldin Procedure Qualification                                IX The purpose  of this procedure is to identify the process by which welding procedures    shall be qualified.
Su lier Surveillance VII H I Vl Vl This procedure establishes the requirements for the evalua-tion of the quality assurance program:controlling the operations of suppliers of safety related part's, materials, components, structures or systems to the Rochester Gas&Electric Corporation.
Welder Qualification The purpose of this procedure is to identify the process by which individual welders shall be qualified.
J Qualit Assurance Review of Architect-En ineer's Bid Selection VII This procedure provides the basis and requirements for Quality Assurance Review of the Architect-Engineer's Bid Selection.
Nondestructive Examination Procedures                        IX d
w4 0 8 I r.Qualit Assurance Review of Architect-En ineer's Bidders List 4'his procedure provides the requirement for quality assurance review and approval of the Architect-Engineer's Bidders List.VII
The purpose  of this procedure is to outline the program by which nondestructive  examination procedures shall be developed.
Nondestructive Examination Procedure Qualification            IX The purpose  of 'this procedure is to outline the program by which nondestructive  examination (NDE) procedures shall be qualified and approved.
Heat Treatin Procedures                                      IX The purpose of this procedure is to define how heat treating procedures shall be established and implemented.


'able IV.l-l (cont'd)Qualit Assurance Procedures (cont'd)Appendix B Criteria Weldin Procedures IX The purpose of this procedure is to identify the process by which welding procedures shall be designed.Weldin Procedure Qualification The purpose of this procedure is to identify the process by which welding procedures shall be qualified.
Table IV.l-l (cont'd)
IX Welder Qualification The purpose of this procedure is to identify the process by which individual welders shall be qualified.
Qualit Assurance Procedures   (cont'd)             Appendix B Criteria Qualit Assurance Review and Anal sis of Material Deficienc Re ort Summary.es The purpose of this procedure is to provide the instruc-tion necessary to implement the process for the review and analysis of Material Deficiency Report Summaries.
Nondestructive Examination Procedures d The purpose of this procedure is to outline the program by which nondestructive examination procedures shall be developed.
Pre aration, Review and Processin    of R.G.&E. Corrective
IX Nondestructive Examination Procedure Qualification IX The purpose of'this procedure is to outline the program by which nondestructive examination (NDE)procedures shall be qualified and approved.Heat Treatin Procedures IX The purpose of this procedure is to define how heat treating procedures shall be established and implemented.  
    .Action Re orts b Qualit Assurance The purpose of this procedure is to provide the instruc-H tion necessary to implement the methods for preparation, review, and processing of RGGE Corrective Action Reports by I
quality assurance.
Qualification of Auditin Personnel                              XVIII This procedure describes the requirements for qualification of auditing personnel.
Audit Schedulin and Plannin                                    XVIII This procedure describes the methods for scheduling and planning internal and external audits.
o 8  Performance  of Qualit Assurance Audits                        XVIII This procedure describes the methods for conducting the 8 0  pre-audit conference, performing the audit and conducting the post-audit conference.


Table IV.l-l (cont'd)Qualit Assurance Procedures (cont'd)Appendix B Criteria Qualit Assurance Review and Anal sis of Material Deficienc Re ort Summary.es The purpose of this procedure is to provide the instruc-tion necessary to implement the process for the review and analysis of Material Deficiency Report Summaries.
Table IV. 1-1 (cont ')
Pre aration, Review and Processin of R.G.&E.Corrective.Action Re orts b Qualit Assurance H I The purpose of this procedure is to provide the instruc-tion necessary to implement the methods for preparation, review, and processing of RGGE Corrective Action Reports by quality assurance.
Qualit Assurance Procedures   (cont'd)             Appendix B Criteria Re ortin  and Follow-of Audit Findin  s                    XVIII This procedure describes the methods   for reporting audit findings,  following-up on  audit reports and filing audit records.
Qualification of Auditin Personnel XVII I This procedure describes the requirements for qualification of auditing personnel.
Conduct of Qualit Assurance Durin and in the Follow-u            XVIII of USAEC and Mana ement Audits This procedure provides .the instructions for audit prepara-tion, audit performance and correction of nonconformances found by the auditors.
Audit Schedulin and Plannin XVIII This procedure describes the methods for scheduling and planning internal and external audits.o 8 8 0 Performance of Qualit Assurance Audits This procedure describes the methods for conducting the pre-audit conference, performing the audit and conducting the post-audit conference.
4X 0 9 m r-8 0 r ro
XVIII


Table IV.1-1 (cont')Qualit Assurance Procedures (cont'd)Appendix B Criteria Re ortin and Follow-U of Audit Findin s XVIII This procedure describes the methods for reporting audit findings, following-up on audit reports and filing audit records.Conduct of Qualit Assurance Durin and in the Follow-u of USAEC and Mana ement Audits XVIII This procedure provides.the instructions for audit prepara-tion, audit performance and correction of nonconformances found by the auditors.4X 0 9 m r-8 0 r ro N
N Table IV. l-l (cont'. )
Table IV.l-l (cont'.)Qualit Control Procedures Appendix B Criteria Ginna Q.A.Pro ram Im lementation This procedure establishes the guidelines for the im-plementation of the Quality Assurance Program at Ginna Station.Trainin of Ginna Personnel To provide instructions regarding the indoctrination and training of Ginna Personnel about the Ginna Quality Assurance Program and implementing QC procedures.
Qualit Control Procedures         Appendix B Criteria Ginna Q.A. Pro ram Im lementation This procedure establishes the guidelines for the im-plementation of the Quality Assurance Program at Ginna Station.
Ginna Qualit Control Or anization To describe the organization responsible for imple-menting the requirements of the Quality Assurance requirements at Ginna Station.Work Start Authorization To provide instructions which ensure that necessary preparation for plant modifications are complete prior to the start of work.Procurement of Nuclear Materials, Parts, and Com onents IV To provide an outline for processing of orders for nuclear material, parts, and components, at Ginna 4 j'I I I Table lV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Station, and to assure that regulatory requirements, design bases, and other requirements necessary to ensure adequate quality are suitably included and referenced in the procurement documents.
Trainin of Ginna Personnel To provide instructions regarding the indoctrination and training of Ginna Personnel about the Ginna Quality Assurance Program and implementing QC procedures.
Appendix B Criteria Review, A royal, Notification, and Transmittal of Su lier Des'and QA/QC Re uirements IV To provide written instruction for outlining the steps necessary for review, approval, notification, and transmittal of supplier procedures, design drawings, or any other requirements as specified in the procurement documents for nuclear material, parts, or components ordered for spare parts or maintenance purposes by plant personnel.
Ginna Qualit Control Or anization To describe the organization responsible for imple-menting the requirements of the Quality Assurance requirements at Ginna Station.
Work Start Authorization To provide instructions which ensure that necessary preparation for plant modifications are complete prior to the start of work.
Procurement of Nuclear Materials, Parts,                 IV and Com onents To provide an outline for processing of orders for nuclear material, parts, and components, at Ginna
 
4 j
    'I I
I
 
Table lV.l-l (cont'd.)
Qualit Control Procedures   (cont'd.)       Appendix  B Criteria Station,   and to assure that regulatory requirements, design bases,   and other requirements necessary to ensure adequate quality are suitably included and referenced in the procurement documents.
Review, A   royal, Notification,   and Transmittal of         IV Su   lier Des'     and QA/QC Re uirements To provide written instruction for outlining the steps necessary for review, approval, notification, and transmittal of supplier procedures, design drawings, or any other requirements as specified in the procurement documents for nuclear material, parts, or components ordered for spare parts or maintenance purposes by plant personnel.
Plant Qualit Control Procedures To describe the intent, scope, and format of the plant quality control procedures.
Plant Qualit Control Procedures To describe the intent, scope, and format of the plant quality control procedures.
Procedures for Performin Routine Maintenance, Re air, or Mo a.icatxon.To outline procedure requirements for routine main-tenance, repair, or modification activities on safety class A and B systems, equipment, or structures..  
Procedures   for Performin Routine Maintenance,     Re air, or Mo a. icatxon.
To outline procedure requirements for routine main-tenance, repair, or modification activities on safety class A and B systems, equipment, or structures..
 
Table  IV.l-l (cont'd.)
Qualit Control Procedures    (cont'd.)    Appendix B Criteria Plant 0 eratin    Procedures To  outline Quality Assurance requirements to be in-cluded  in plant operating procedures which are used to direct operating, test, and refueling activities on safety Class A and B structures, systems-, or equipment.
Issuance Control of Procedures Used For the 0 eration        VI of 'the Plant This procedure establishes    the method by which pro-cedures and check off lists used in the operation of the plant are to be controlled.
Document  Control for Procedure  Chan es                    VI This procedure describes the method by which procedures described in reference 2.3 to be revised shall be controlled.
Document  Control at Ginna                                  VI To  define those non-procurement documents requiring control at Ginna  and the method by which they shall be controlled.
Drawin    Chan es at Ginna                                  VI To  define the responsibilities and to provide in-structions for ensuring that existing piping and
 
Table IV.l-l (cont'd.)
Qualit Control Procedures    (cont'd.)    Appendix B Criteria circuit  drawings are kept current and updated to always reflect  the "As built" condition of the plant following modifications to systems and equipment.
Receivin    Ins ection of Purchased Material                  VII To define the activities and responsibilities necessary for properly receiving nuclear materials and in-specting them prior to acceptance for use.
Control of Purchased Material, E ui ment, and Services      VIII To outline the program for control of material, equip-ment, and services purchased through contractors.
Control of Materials, Parts, and Com onents                  VIII To establish the system for effective control of material, parts, or components from receipt at Ginna through installation or use.
Identification    and Markin  of Material                  VIII To  establish  an  outline for identification  and mark-ing of material to maintain quality and traceability through the life of the material.


Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Plant 0 eratin Procedures Appendix B Criteria To outline Quality Assurance requirements to be in-cluded in plant operating procedures which are used to direct operating, test, and refueling activities on safety Class A and B structures, systems-, or equipment.
Table IV. 1-1 (cont'd. )
Issuance Control of Procedures Used For the 0 eration of'the Plant VI This procedure establishes the method by which pro-cedures and check off lists used in the operation of the plant are to be controlled.
Qualit Control Procedures     (cont'd.)     Appendix B Criteria Control of Weldin                                              IX The purpose of this procedure     is to establish the pro-gram for effective control-of    qualified personnel and procedures pertaining to welding.
Document Control for Procedure Chan es VI This procedure describes the method by which procedures described in reference 2.3 to be revised shall be controlled.
Issue, Control, and Stora    e of  Weld Consumables To  provide instructions for issue, control, and storage of weld consumables.
Document Control at Ginna VI To define those non-procurement documents requiring control at Ginna and the method by which they shall be controlled.
Weldin  E  ui ment Performance  Verification                  IX To outline the program for periodic performance verification of equipment used on special processes.
Drawin Chan es at Ginna VI To define the responsibilities and to provide in-structions for ensuring that existing piping and
Ins ection Activities at Ginna To establish guide lines for the activities requir-ing inspectors, source of inspectors, and       qualifi-cations of inspectors.
Ins ector Qualification and    Res  onsibilities To  establish requirements for those designated to perform inspection activities at Ginna.


Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Appendix B Criteria circuit drawings are kept current and updated to always reflect the"As built" condition of the plant following modifications to systems and equipment.
Table IV.l-l (cont'd.)
Receivin Ins ection of Purchased Material VII To define the activities and responsibilities necessary for properly receiving nuclear materials and in-specting them prior to acceptance for use.Control of Purchased Material, E ui ment, and Services VIII To outline the program for control of material, equip-ment, and services purchased through contractors.
Qualit Control Procedures   (cont'd.) Appendix 8 Criteria Test Procedure  Re uirements                            XI To  outline requirements for the procedures which are performed to verify the correct operability of safety related equipment or structures.
Control of Materials, Parts, and Com onents VIII To establish the system for effective control of material, parts, or components from receipt at Ginna through installation or use.Identification and Markin of Material VIII To establish an outline for identification and mark-ing of material to maintain quality and traceability through the life of the material.
Performance  of Tests                                    XI To establish requirements for performing tests to include, but not be limited to, surveillance testing, special tests, post maintenance testing, physics testing, and testing following modification or sig-nificant changes in operating procedures.
Documentation, Evaluation and Dis osition of              XI Test Resu ts To describe the requirements for accumulating, documenting, evaluating, and dispositioning    of results of 1
all tests.
Test Personnel  Re uirements                            XI To establish requirements for personnel designated to perform and/or assist in the conductance of tests.
Calibration and Control of Test Instruments Used For      XII Calx ration To provide guidelines for test instrument calibration and control which satisfy the requirements of the


Table IV.1-1 (cont'd.)Qualit Control Procedures (cont'd.)Appendix B Criteria Control of Weldin IX The purpose of this procedure is to establish the pro-gram for effective control-of qualified personnel and procedures pertaining to welding.Issue, Control, and Stora e of Weld Consumables To provide instructions for issue, control, and storage of weld consumables.
f,a' Table IV. l-l (cont'd. )
Weldin E ui ment Performance Verification IX To outline the program for periodic performance verification of equipment used on special processes.
Qualit Control Procedures     (cont'd.) Appendix B Criteria
Ins ection Activities at Ginna To establish guide lines for the activities requir-ing inspectors, source of inspectors, and qualifi-cations of inspectors.
                                  'III
Ins ector Qualification and Res onsibilities To establish requirements for those designated to perform inspection activities at Ginna.  
.Quality Assurance Manual.,
Calibration  and Control of Maintenance Measurin          XII Tools and  E ux ment To  provide guidelines for calibration and control of measuring  tools and equipment used by maintenance to perform critical maintenance measurement.
Calibration  and Control of Qualit Control                XII Measure.n  Tools To  outline calibration  and  control instructions for inspection measuring tools used by quality control to determine the reject or accept status of parts and components.
Handlin  , Stora e, and Shi in To outline the plan for control of handling, storage, shipping, and preservation of material to prevent damage, deterioration, or loss from on-site delivery through installation.
Material Handlin    E ui ment                             XIII To outline the requirements for ensuring that material handling equipment remains in good condition.
 
Table IU.l-l (cont'd.)
Qualit Control Procedures    (cont'd.)    Appendix  B Criteria Work, Ins ection, Test Status Control as Related to        XIU Maintenance,  Re air, Modification, or Refuelin To establish work inspection or test status sheets for indicating the inspection and test status of components and systems involved in maintenance, repair, or modification.
S stems or E ui ment 0 eratin    and Test Status          XIU Control Indicators To"define the system for indicating the operating status of structures, systems, and components to pre-vent their inadvertent operation during maintenance, repair, modification, or test.
Control and Dis osition of Deficient Materials To-outline the necessary steps for effective control and disposition of non-conforming materials, parts, and components.
Issue of Material Deficienc    Re  orts To establish an  outline for issuing and processing Material Deficiency Reports.


Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Appendix 8 Criteria Test Procedure Re uirements XI To outline requirements for the procedures which are performed to verify the correct operability of safety related equipment or structures.
I Table IV.l-l (cont'd.)
Performance of Tests XI To establish requirements for performing tests to include, but not be limited to, surveillance testing, special tests, post maintenance testing, physics testing, and testing following modification or sig-nificant changes in operating procedures.
Qualit Control Procedures   (cont'd.)   Appendix B Criteria Qualit Deficiencies and Corrective Action To provide instructions for identifying, reporting, and correcting conditions adverse to quality.
Documentation, Evaluation and Dis osition of Test Resu ts XI To describe the requirements for accumulating, documenting, evaluating, and dispositioning of results of all tests.1 Test Personnel Re uirements XI To establish requirements for personnel designated to perform and/or assist in the conductance of tests.Calibration and Control of Test Instruments Used For Calx ration XII To provide guidelines for test instrument calibration and control which satisfy the requirements of the f,a' Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.).Quality Assurance Manual., Calibration and Control of Maintenance Measurin Tools and E ux ment Appendix B Criteria XII To provide guidelines for calibration and control of measuring tools and equipment used by maintenance to perform critical maintenance measurement.
Control of Qualit Assurance Records at, Ginna            XVII To outline the procedure for control of records and documents to be retained.
Calibration and Control of Qualit Control Measure.n Tools XII To outline calibration and control instructions for inspection measuring tools used by quality control to determine the reject or accept status of parts and components.
Processin of New Records                                  XVII To detail the processing steps required of new records from their receipt in Central Records until final placement in their storage location.
Handlin , Stora e, and Shi in'III To outline the plan for control of handling, storage, shipping, and preservation of material to prevent damage, deterioration, or loss from on-site delivery through installation.
Record Stora e Facilit and E ui ment                     XVII To provide a description of the record storage facilities  and equipment requirements.
Material Handlin E ui ment To outline the requirements for ensuring that material handling equipment remains in good condition.
Routine Surveillance                                      XVIII To provide instructions for Quality Control Sur-veillance of plant activities covered by the quality assurance  program.
XIII
Correction of Audit Deficiencies                          XVIII To provide instructions to be used for correcting audit deficiencies at Ginna.


Table IU.l-l (cont'd.)Qualit Control Procedures (cont'd.)Appendix B Criteria Work, Ins ection, Test Status Control as Related to Maintenance, Re air, Modification, or Refuelin XIU To establish work inspection or test status sheets for indicating the inspection and test status of components and systems involved in maintenance, repair, or modification.
d Table IV.l-l (cont'd.)
S stems or E ui ment 0 eratin and Test Status Control Indicators XIU To"define the system for indicating the operating status of structures, systems, and components to pre-vent their inadvertent operation during maintenance, repair, modification, or test.Control and Dis osition of Deficient Materials To-outline the necessary steps for effective control and disposition of non-conforming materials, parts, and components.
En ineerin Procedures                 A ppendix B Criteria En ineerin   Im lementation. of the Qualit Pro ram The purpose of this procedure is to establish the Engineering Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is estab-lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.
Issue of Material Deficienc Re orts To establish an outline for issuing and processing Material Deficiency Reports.
~rainincr This procedure explains the requirements for the training of engineering personnel in the use of the Engineering Procedures Manual.
I Table IV.l-l (cont'd.)Qualit Control Procedures (cont'd.)Appendix B Criteria Qualit Deficiencies and Corrective Action To provide instructions for identifying, reporting, and correcting conditions adverse to quality.Control of Qualit Assurance Records at, Ginna XVII To outline the procedure for control of records and documents to be retained.Processin of New Records XVI I To detail the processing steps required of new records from their receipt in Central Records until final placement in their storage location.Record Stora e Facilit and E ui ment XVII To provide a description of the record storage facilities and equipment requirements.
En ineerin   De artment Or anization and   Res onsibilities This procedure describes the Engineering Department Organization and defines its responsibilities for the design of safety related components, structures and systems.
Routine Surveillance XVIII To provide instructions for Quality Control Sur-veillance of plant activities covered by the quality assurance program.Correction of Audit Deficiencies XVIII To provide instructions to be used for correcting audit deficiencies at Ginna.
Desi n   Criteria This procedure defines the criteria to be considered in the design of modifications to a nuclear plant.
d Table IV.l-l (cont'd.)En ineerin Procedures A ppendix B Criteria En ineerin Im lementation.
of the Qualit Pro ram The purpose of this procedure is to establish the Engineering Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant.The manual is estab-lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.~rainincr This procedure explains the requirements for the training of engineering personnel in the use of the Engineering Procedures Manual.En ineerin De artment Or anization and Res onsibilities This procedure describes the Engineering Department Organization and defines its responsibilities for the design of safety related components, structures and systems.Desi n Criteria This procedure defines the criteria to be considered in the design of modifications to a nuclear plant.  


Table IV.l-l (cont'd..)
Table IV.l-l (cont'd..)
En ineerin Procedures (cont'd.)Appendix B Criteria It establishes the requirements for documentation and review of these criteria..
En ineerin Procedures   (cont'd.)     Appendix B Criteria It establishes   the requirements for documentation and review of these   criteria..
Desi n Anal sis 6 Calculations This procedure defines the requirements for controlling the preparation and documentation of design analyses and calculations.-
Desi n Anal sis   6 Calculations This procedure defines the requirements for controlling the preparation and documentation of design analyses and calculations.
En ineerin Drawin s This procedure establishes the requirements for the preparation and revision of Engineering Drawings.En ineerin S ecifications This procedure defines the requirement for specifi-cations and requirements documents needed to assure that all safety related structures, components, and systems are purchased, constructed, inspected and tested in accordance with applicable codes and standards and the provisions of-10CPR50, Appendix B.The procedure establishes the content and format of the documents.
En ineerin Drawin s This procedure establishes   the requirements for the preparation and revision of Engineering Drawings.
En ineerin S ecifications This procedure defines the requirement for specifi-cations and requirements documents needed to assure that all safety related structures, components, and systems are purchased, constructed, inspected and tested in accordance with applicable codes and standards and the provisions of- 10CPR50, Appendix B.
The procedure   establishes the content and format of the documents.
Design Control and Review This procedure defines the activities required to assure adequate control of design modifications and the requirements for design verification and review.
Design Control and Review This procedure defines the activities required to assure adequate control of design modifications and the requirements for design verification and review.
0 0 Table IV.l-l (cont'd.)En ineerin Procedures (cont'd.)Appendix B Criteria Purchase Re uisitions IV This procedure describes the actions required of Engineering personnel to purchase material related to quality or safety of a nuclear power plant.En ineerin Procedures The purpose of this procedure is to establish the-requirements for Engineering instructions, pro-cedures and drawings needed to implement the Rochester Gas and Electric Quality Assurance Manual.It defines the responsibilities for preparing and approving the Engineering procedures manual, estab-lishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the preparation of the Engineering procedures.
Fabrication and Construction S ecifications V This procedure describes the requirements for documentation of the interpretation of engineering drawings and specifications into work instructions to permit plant operations to properly make modi-fications to the nuclear plant.
0 0 Table=IU.l-l (cont'd.)En ineerin Procedures (cont'd.)Appendix B Criteria Control and.Issuance of En ineering Documents UI This procedure establishes the requirements for the control and issuance of engineering drawings, specifications, requirements documents, and work in-structions.
It establishes the numbering system, the control of originals, approvals, distribution, and revisions for both Rochester Gas and Electric and supplier originated drawings.Su lier Evaluation VII This procedure defines the requirements for the evaluation of a supplier's engineering and manu-facturing organization and his design and production capabilities to be.performed prior to subcontracting a safety or quality related effort to a new supplier.Review of Test Results XI The purpose of this procedure is to establish the requirements for the review and evaluation of test results to implement the requirements of Section ll of the Rochester Gas and Electric Quality Assurance Manual.Qualit Control Deficienc Re ortin XVI This procedure establishes the requirements for 0
Table IV.l-l (cont'd.)En ineerin Procedures (cont'd.)Appendix B Criteria evaluating and answering Quality Control Deficiency Reports which are related to design deficiencies.
En ineerin Records XVI I This procedure establishes the requirements for the storage of all Engineering Department drawings, specifications, requirements documents and supplier documents for all safety related components, structures, and systems controlled by the Rochester Gas and Electric Quality Assurance Manual.Audit Re uirements XVIII The purpose of this procedure is to describe the re-sponsibilities of the Engineering Department before, during, and after an audit.Purchasin Procedures Purchasin Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Purchasing Procedures for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant.The manual is es-tablished to assure meeting the requirements of


Table IV.l-l (cont'd.)Purchasin Procedures (cont'd.)Appendix B Criteria Title 10 of the Code of Federal Regulations, Part 50, Appendix B,"Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.Trainin of Purchasin Personnel This procedure defines the requirements for the training of Purchasing Department personnel in the use of the Purchasing Procedures Manual.Purchasin De artment Or anization and Res onsibilities This procedure describes the Purchasing Department organization and its responsibilities for the pro-curement of safety related materials, components, structures, and systems.Pre aration, Review, A royal and Issuance of Purchase Orders and Chan e Orders IV This procedure establishes the procedure for processing a Purchase Order upon receipt of a Purchase Requisition.
0 0
Purchasin Procedures The purpose of this procedure is to establish the requirement for purchasing instructions and C
 
Table IV.l-l (cont'd.)Purchasin Procedures (cont'd.)Appendix B Criteria procedures needed to implement the Rochester Gas and Electric Quality Assurance Manual.It defines the re-sponsibilities for preparing and approving the Pur-chasing Procedures Manual, establishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the pre-paration of the purchasing procedures.
Table IV.l-l (cont'd.)
Control and Issuance of Purchasin Procedures VI This procedure establishes the methods for the de-velopment, maintenance, control, and issuance of the Purchasing Procedures Manual.Su lier Qualification, Surveillance, and Control VII This procedure describes the requirements for qualifying suppliers, maintaining records of approved suppliers, and evaluating their performance during-the manufacturing stage to assure conformance to specification requirements.-
En ineerin Procedures  (cont'd.)  Appendix  B Criteria Purchase Re  uisitions                                  IV This procedure describes the actions required of Engineering personnel to purchase material related to quality or safety of a nuclear power plant.
Suppliers shall be evaluated prior to issuance-of a purchase order to insure that they are capable of manufacturing and delivering a product conforming to the applicable purchase specifications.
En  ineerin Procedures The purpose of this procedure is to establish the
Qualified Su liers List VII This procedure describes the method to be used for.the development and maintenance of the Qualified Suppliers List.
-requirements for Engineering instructions, pro-cedures and drawings needed to implement the Rochester Gas and Electric Quality Assurance Manual.
0 Table IV.l-l (cont'd.)Purchasin Procedures (cont'd.)Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to~be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.Qualit Control Deficienc Re ortin This procedure describes the actions to, be taken by the Purchasing Department when supplier deficiencies which require corrective action are discovered.
It  defines the responsibilities for preparing and approving the Engineering procedures manual, estab-lishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the preparation of the Engineering procedures.
Purchasin Records XVII This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.Audit Re uirements XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.
Fabrication  and  Construction S ecifications            V This procedure describes the requirements for documentation of the interpretation of engineering drawings and specifications into work instructions to permit plant operations to properly make modi-fications to the nuclear plant.
T~'
 
Table IV.l-l (cont'd.)Purchasin Procedures (cont'd.)Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.Qualit Control Deficienc Re ortin This.procedure describes the actions to be taken by the Purchasing Department when supplier deficiencies which require corrective action are discovered.
0 0
Purchasin Records XVII This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.Audit Re uirements The purpose of this procedure is to describe the.responsibilities of the Purchasing Department during an internal audit.XVIII
 
Table =IU.l-l (cont'd.)
En ineerin Procedures  (cont'd.)    Appendix  B Criteria Control  and. Issuance of En ineering Documents            UI This procedure establishes the requirements for the control and issuance of engineering drawings, specifications, requirements documents, and work in-structions. It  establishes the numbering system, the control of originals, approvals, distribution, and revisions for both Rochester Gas and Electric and supplier originated drawings.
Su  lier Evaluation                                        VII This procedure defines the requirements for the evaluation of a supplier's engineering and manu-facturing organization and his design and production capabilities to be. performed prior to subcontracting a  safety or quality related effort to a new supplier.
Review of Test Results                                      XI The purpose of this procedure is to establish the requirements for the review and evaluation of test results to implement the requirements of Section of the Rochester Gas and Electric Quality Assurance ll Manual.
Qualit Control Deficienc Re ortin                          XVI This procedure establishes the requirements for
 
0 Table IV.l-l (cont'd.)
En ineerin Procedures    (cont'd.)  Appendix B Criteria evaluating and answering Quality Control Deficiency Reports which are related to design deficiencies.
En  ineerin Records                                    XVII This procedure establishes the requirements for the storage of all Engineering Department drawings, specifications, requirements documents and supplier documents for all safety related components, structures, and systems controlled by the Rochester Gas and Electric Quality Assurance Manual.
Audit Re uirements                                      XVIII The purpose of this procedure is to describe the re-sponsibilities of the Engineering Department before, during, and after an audit.
Purchasin Procedures Purchasin  Im lementation of the Qualit Pro ram The purpose  of this procedure is to establish the Purchasing Procedures  for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is es-tablished to assure meeting the requirements of
 
Table IV.l-l (cont'd.)
Purchasin  Procedures  (cont'd.)         Appendix B Criteria Title 10 of the Code   of Federal Regulations, Part 50, Appendix B, "Quality Assurance   Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.
Trainin of Purchasin Personnel This procedure defines the requirements for the training of Purchasing Department personnel in the use of the Purchasing Procedures Manual.
Purchasin   De artment Or anization and   Res onsibilities This procedure describes the Purchasing Department organization and its responsibilities for the pro-curement of safety related materials, components, structures, and systems.
Pre aration, Review, A royal and Issuance of                   IV Purchase Orders and Chan e Orders This procedure establishes the procedure for processing a Purchase Order upon receipt of a Purchase Requisition.
Purchasin   Procedures The purpose of this procedure is to establish the requirement for purchasing instructions and
 
C Table IV.l-l (cont'd.)
Purchasin   Procedures   (cont'd.)       Appendix B Criteria procedures needed to implement the Rochester Gas and Electric Quality Assurance Manual.       It defines the re-sponsibilities for preparing and approving the Pur-chasing Procedures Manual, establishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the pre-paration of the purchasing procedures.
Control and Issuance of Purchasin Procedures                   VI This procedure establishes the methods for the de-velopment, maintenance, control, and issuance of the Purchasing Procedures Manual.
Su   lier Qualification,   Surveillance,   and Control         VII This procedure describes the requirements for qualifying suppliers, maintaining records of approved suppliers, and evaluating their performance during
- the manufacturing stage to assure conformance to specification requirements.- Suppliers shall be evaluated prior to issuance-of a purchase order to insure that they are capable of manufacturing and delivering a product conforming to the applicable purchase specifications.
Qualified Su   liers List                                       VII This procedure describes the method to be used for .the development and maintenance of the Qualified Suppliers List.
 
0 Table IV.l-l (cont'd.)
Purchasin Procedures (cont'd.)     Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to~be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.
Qualit Control Deficienc Re ortin This procedure describes the actions to, be taken by the Purchasing Department when supplier deficiencies which require corrective action are discovered.
Purchasin   Records                                     XVII This procedure establishes the requirements   for the storage of all Purchasing Department records   for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.
Audit Re uirements                                       XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.
 
T
~'
 
Table IV.l-l (cont'd.)
Purchasin   Procedures (cont'd.)     Appendix B Criteria Material Deficienc   Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.
Qualit Control Deficienc     Re ortin This. procedure describes the actions to be taken by the Purchasing Department when supplier deficiencies which require corrective action are discovered.
Purchasin   Records                                       XVII This procedure establishes the requirements   for the storage of all Purchasing Department records   for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.
Audit Re uirements                                       XVIII The purpose of this procedure is to describe the     .
responsibilities of the Purchasing Department during an internal audit.
 
TABLE  IV.4-1 Procurement Document    Re uirements Items to be considered      for inclusion in  procurement documents include:
: 1. Detailed statement    o f the work to be per formed.
: 2. Complete  identification of the goods or services to be provided.
: 3. Identification of the safety class of the item.
: 4. Quantitative and qualitative technical and functional require-ments and acceptance    criteria.
: 5. Applicable regulatory codes and standards.
: 6. Identification of applicable drawings, specifications, instruc-tions,  and procedures.
: 7. Identification of all test and inspection requirements.
: 8. Listing of documentation required to be submitted.
: 9. Retention and submittal requirements of supplier quality assurance records, such as special process and test procedures, materials records, calculations and analyses.
: 10. Applicable portions of 10CFR50, Appendix B, special quality assurance program requirements, and requirements for supplier
      'rocurement documentation.
ll. Access  rights for visits and/or audits.
: 12. Witness and hold point requirements.
: 13. Interfaces between RGGE and supplier organizations.
: 14. Identification of special requirements or responsibilities for design, fabrication, cleaning, identification, erecting, packaging, handling, shipping and storage (including extended field storage).
: 15. Requirements for reporting and approving disposition of noncon-formances.
: 16. Requirements  for control of special processes.
: 17. Requirement for the supplier to provide a list of his exceptions to the specification.
: 18. Control of measuring and test equipment.
IV-77                Revision  2 November 1, 1974
 
0 0
 
                        'TABLE  IV.18-1 Audit List
                      \
Functional Or anization              Activities Audited Engineering Indoctrination  and Training Control              'esign Procurement Document Control Document Control Control of Special Processes Records Procurement Control Purchasing Indoctrination  and Training Procurement Document Control Records Procurement Control Ginna Station Indoctrination and Training Modification Maintenance and Repair Procurement Control Document Control In-Service Inspection Surveillance Testing Handling, Storage, and Shipping Operations Refueling Control of Measuring and Test Equipment Health Physics and Chemistry Operator Training and Retraining Security Emergency Plan Inspection and  Surveillance Records Revision    2 November 1, 1974 IV-78
 
i 8
i
 
ROCHESTER GAS C ELECTRIC CORP.
GIMME STATION MSNAGKMENT ORGLN SATION I CIIAIRMANOF TIIE i)CARD PRESIDENT EXECUTIVE V. P.
Y. P. MARI)ETING H
PURCNASING, PUBLIC INFORMATION DISTRICTS V. P. ENC. t CONST.                        r                                  Y P  ELECTRIG AND STEAM PRODUCTION I
1                                                                                                    I I                                DIV. SUPT. El ECTRIC PURCNASINC ACENT                                  Cll)Ef'NCINEER                                                            AND STEAM PRODUCTION I
I I
I I                                      SUPT. GINIIA STATION I
ASST. CIIIEf'NG.                          ASST. CIIIEF DESIGN AND CONST.                              ENG.
I I
I ASSISTANT SU)rf, DESIGN AND CONST.          RECORDS AND          GENERAL          Q. A.
DRAI'TING            MAINTENANCE 0 8 PLANT OPERATION S V.                                                                                                                  QUALffVCONTROL                      STAFF
  'g O'.U)
S 0 Supervielon and Adminlatration Other Funetlonal Relationah)pa FIGURE    IV.2-1 NOVEMBER 1 r 1974
 
ROCHESTER GAS AND ELECTRIC CORPORATION QUALITY ASSURANCE ORGANIZATION Quality Assurance Coordinator Quality Assurance Engineer Quality Assurance Engineer      Quality Assurance Engineer      Quality Assurance Engineer Quality Assurance Engineer Welding and NDT              Operations                      Q.A. Progran                    Construction                  Design RA 0 8 Figure IV. 2-2 November 1, 1974
 
ROCHESTER GAS AND ELECTRIC CORPORATION GINNA STATION ORGANIZATION Superintendent Training Coordinator Assistant Superintendent Supervisor                    SOL Results and Tests Chemistry and Operations                        Maintenance            Nuclear                quality Control Engineer                      Engineer                          Engineer              Engineer                    Engineer Health Physics aSOL Shift  Foreman 1/Shift OL Head Control Operator 1/Shift Control Operator OL                                              SOL  - Senior Operator License f
1/Shi t                                                        OL  - Operator License Auxiliary Operator 2/Shift Figurc IV. 2-3 July 1, 1974


TABLE IV.4-1 Procurement Document Re uirements Items to be considered for inclusion in procurement documents include: 1.Detailed statement o f the work to be per f ormed.2.Complete identification of the goods or services to be provided.3.Identification of the safety class of the item.4.Quantitative and qualitative technical and functional require-ments and acceptance criteria.5.Applicable regulatory codes and standards.
0 GINNA STATION OUALITY CONTROL ORGANIZATION equality Control Engineer equality Control Engineer                  equality Control Technician Inspecti'on                                  Records Figure IV.2-4 July 1,    1974
6.Identification of applicable drawings, specifications, instruc-tions, and procedures.
7.Identification of all test and inspection requirements.
8.Listing of documentation required to be submitted.
9.Retention and submittal requirements of supplier quality assurance records, such as special process and test procedures, materials records, calculations and analyses.10.Applicable portions of 10CFR50, Appendix B, special quality assurance program requirements, and requirements for supplier'rocurement documentation.
ll.Access rights for visits and/or audits.12.Witness and hold point requirements.
13.Interfaces between RGGE and supplier organizations.
14.Identification of special requirements or responsibilities for design, fabrication, cleaning, identification, erecting, packaging, handling, shipping and storage (including extended field storage).15.Requirements for reporting and approving disposition of noncon-formances.
16.Requirements for control of special processes.
17.Requirement for the supplier to provide a list of his exceptions to the specification.
18.Control of measuring and test equipment.
IV-77 Revision 2 November 1, 1974 0 0
'TABLE IV.18-1 Audit List\Functional Or anization Activities Audited Engineering Indoctrination and Training'esign Control Procurement Document Control Document Control Control of Special Processes Records Procurement Control Purchasing Indoctrination and Training Procurement Document Control Records Procurement Control Ginna Station Indoctrination and Training Modification Maintenance and Repair Procurement Control Document Control In-Service Inspection Surveillance Testing Handling, Storage, and Shipping Operations Refueling Control of Measuring and Test Equipment Health Physics and Chemistry Operator Training and Retraining Security Emergency Plan Inspection and Surveillance Records IV-78 Revision 2 November 1, 1974 i 8 i ROCHESTER GAS C ELECTRIC CORP.GIMME STATION MSNAGKMENT ORGLN I SATION CIIAIRMAN OF TIIE i)CARD PRESIDENT EXECUTIVE V.P.Y.P.MARI)ETING PURCNASING, PUBLIC INFORMATION DISTRICTS H 1 PURCNASINC ACENT ASST.CIIIEf'NG.
DESIGN AND CONST.V.P.ENC.t CONST.Cll)Ef'NCINEER ASST.CIIIEF ENG.r I I I I I I I I I I I I Y P ELECTRIG AND STEAM PRODUCTION DIV.SUPT.El ECTRIC AND STEAM PRODUCTION SUPT.GINIIA STATION 0 8 S V.'g U)O'.S 0 DESIGN AND CONST.RECORDS AND DRAI'TING GENERAL MAINTENANCE Q.A.QUALffV CONTROL ASSISTANT SU)rf, PLANT OPERATION STAFF Supervielon and Adminlatration Other Funetlonal Relationah)pa FIGURE IV.2-1 NOVEMBER 1 r 1974  


ROCHESTER GAS AND ELECTRIC CORPORATION QUALITY ASSURANCE ORGANIZATION Quality Assurance Coordinator Quality Assurance Engineer Welding and NDT Quality Assurance Engineer Operations Quality Assurance Engineer Q.A.Progran Quality Assurance Engineer Construction Quality Assurance Engineer Design RA 0 8 Figure IV.2-2 November 1, 1974  
Rochester Gas and Electric Corporation Engineer ing Deparbnent Or ganixation Chief Engineer Assistant Chief Engineer Assistant Chief Engineer-                                                        Administration, Maintenance, Engineering and Construction                                                      Quality Assurance, Drafting, Environmental Civil      Mechanical          Nuclear            Electrical          Ginna Project          General                      Quality 1
Engineering          Engineering                                                              Drafting          Assurance Records Engineering                                          Engineering          Manager            Maintenance 4J Figure IV.2   5 November   I, 1974 0 8 8 i" Q
g S 0


ROCHESTER GAS AND ELECTRIC CORPORATION GINNA STATION ORGANIZATION Superintendent Training Coordinator Assistant Superintendent Results and Tests Engineer Supervisor Chemistry and Health Physics Operations Engineer SOL Maintenance Engineer Nuclear Engineer quality Control Engineer aSOL Shift Foreman 1/Shift Head Control OL Operator 1/Shift Control Operator OL 1/Shi f t SOL-Senior Operator License OL-Operator License Auxiliary Operator 2/Shift Figurc IV.2-3 July 1, 1974 0
0 Rochester  O.and Gas        Electric Corporation Ginna    Station Review and   Audits Functions NSARB QA                                            PORC Purchasing                          Engineering                plant Review 1'inure IV. 2-6 July 1, 1974
GINNA STATION OUALITY CONTROL ORGANIZATION equality Control Engineer equality Control Engineer Inspecti'on equality Control Technician Records Figure IV.2-4 July 1, 1974  


Rochester Gas and Electric Corporation Engineer ing Deparbnent Or ganixation Chief Engineer Assistant Chief Engineer-Engineering and Construction Assistant Chief Engineer-Administration, Maintenance, Quality Assurance, Drafting, Environmental 1 Civil Engineering 4J Mechanical Engineering Nuclear Engineering Electrical Engineering Ginna Project Manager General Maintenance Drafting Quality Assurance Records Figure IV.2 5 November I, 1974 0 8 8 i" g Q S 0 0
Q yI
O.Rochester Gas and Electric Corporation Ginna Station Review and Audits Functions NSARB QA PORC Purchasing Engineering plant Review 1'inure IV.2-6 July 1, 1974 Q y'I I l}}
  'I l}}

Latest revision as of 04:42, 4 February 2020

Forwards Application for Amend to License DPR-18,revising Tech Specs to Incorporate Radiological Effluent Tech Specs. Change Supersedes 790214 Proposal
ML17308A072
Person / Time
Site: Ginna Constellation icon.png
Issue date: 08/12/1982
From: Maier J
ROCHESTER GAS & ELECTRIC CORP.
To: Harold Denton
Office of Nuclear Reactor Regulation
Shared Package
ML17256B182 List:
References
NUDOCS 8208170214
Download: ML17308A072 (625)


Text

REGULATOR NFORMA'TION DISTRIBUTION " TEM {'RIDS)

AOCESSION NBR:8208170214 DOC ~ DATE: 82/08/12 NOTARIZED:,NO OOGKET FACIL:50 244 Robert Emmet Ginna Nuclear Plant~ Uni!t ii Rochester G 05000244 AUTH INANE AUTHOR AFFILIATION MAIERiJ ~ E ~ Rochester Gas E Electric Corp<

'RBC IP ~ NAME RECIPIENT AFFILIATION DENTON,H,RE Office of Nuclear Reactor Regulationg Director SUBJECT; Forwards application for amend to License OPR 18irevising Tech Specs to incorporate radiological effluent 'Tech supersedes 790214 propos Specs,'han'ge oe'//rcF DISTRIBUTION CODE: C002B COPIES RECEIVED:LTR 9 -ENCL X~ SIZE: /+

TITLE: Environ. Comments, NOTES:NRR/DL/SEP icy, 05000244 RECIPIENT COPIES REC IP IENT'D

>COPIES ID CODE/NAME LTTR ENCL CODE/NAME LTTR ENCL ORB 45 BC 06 7 7 ORB e5 LA 1 1 NLe ORNL 1 1 LYONSiJ ~ 01 1 1 INTERNAL: ELD/HOS4 1 0 NRR NORRI'SgJ 1 NRR/DE/AEAB'0 1 1 NRR/DE/EEB 16 1 1 NRR/DE/HGEB "'21 1 1 NRR/DE/SAB 18 1 1 NRR/DS I/AEB 19 1 1 /ETSB 15 1 1 NRR/DS I/RAB 17 1 1 REG F IL 04 1 1

'I, RGN1 1 1

/ ,EXTERNAL: 1 0 LPOR 03 1 1 NATL LAB 21 5 5 NRC PDR 02 1 1 NSIC 05 1 1 NTIS 1 NOTiES'CRS R~t E'w$ p~

1 1 q~ ~ C2l.e~s TOTAL NUMBER OF COPIES REQUIRED: L~TTR 32 ENCL 30

~ ~

e

/ //I//I/////

8K ROCHESTER GAS AND ELECTRIC CORPORATION ~ 89 EAST AVENUE, ROCHESTER, N.Y. 14649 JOHN E. MAILER TELEPHONE Vice Preskfent ARE* cooE Tle 546-2700 August 12, 1982 Mr. Harold R. Denton Director Office of Nuclear Reactor Regulation U.S. Nuclear Regulatory Commission Washington, D.C. 20555 Re: Rochester Gas and Electric Corporation, R. E. Ginna Nuclear Power Plant, Unit No. 1 Docket No. 50-244

Dear Mr. Denton:

Enclosed are:

l. Three (3) originals and nineteen (19) copies of an Application for Amendment to Operating License to amend Appendix A of that license to revise Technical Specifications to incorporate radiological effluent specifications.
2. Also enclosed are forty (40) copies of documents designated Attachments A and B, which set forth the revised Table and further describe the purposes of the changes made.

This change supersedes our previous proposal, dated February 14, 1979, on this subject. Thus, no fee is rec(uired.

Sincerely, 8208i702i 4 8208i2 PDR ADGCH 05000244 P

~~~5 6'pc~. se c.W '< ~,e~/rz/sE-~ams

<i~rt/~K ~A'-//8czar

~s/~ o/s C3pg Attachment A Revise the Technical Specifications as follows:

Remove Insert.

Table of Contents Table of Contents p 1-2 p 1-2 p 1-2a 1-5 p 1-5 p 3.5-1 through 3.5-3 p 3.5-1 throug 3.5-3 p 3.5-7 through 3.5-9 p 3.9-1 through 3.9-7 p 3.9-1 thrp6gh 3.9-12 p 3.15-1 tlfrough 3.15-8 p 4.1-1 p 4.1-1 p 4.1-5 through 4.1-7 p 4.1-5 ~through 4.1-7 p 4.1-14 p 4.1/~2 p 4.10-1 hrough 4.10-5 p 4.10-1 through 4.10-5 p 4.12-1 through 4.12-5 p 4/12-1 through 4.12-9 p +.5-1 p 6.5-10 p~6.5-10 6.5-10a p 6.8-1 p 6.8-1

p. 6.8-2 p 6.9-1 through 6. -2 p 6.9-1 through 6.9-3 p 6.9-3a through 6.9-3c p 6.9-6 through 6.9-3, p 6.9-6 through 6.9-10 p 6.14-1 p 6.15-1 p 6.15-2

TABLE OF CONTENTS PacCe 1.0 DEFINITIONS 2.0 SAFETY LIMITS AND LIMITING SAFETY SYSTEM SETTINGS 2.1-1 2.1 Safety Limit, Reactor Core 2.1-1 2.2 Safety Limit, Reactor Coolant System Pressure 2 k2 1 2.3 Limiting Safety Systems Settings, Protective Instrumentation 2 3 1

~

3.0 LIMITING CONDITIONS FOR OPERATION 3.1-1 3.1 Reactor Coolant System 3 1 1

~

3.1.1 Operational Components 3 01 1 3.1.2 Heatup and Cooldown 3.1-5 3.1.3 Minimum Conditions for Criticality 3.1-17 3.1.4 Maximum Coolant Activity 3.1-20 3.1.5 Leakage 3.1-25 3.1.6 Maximum Reactor Coolant Oxygen, Fluoride, and Chloride Concentration 3 ~ 1 31 3.2 Chemical and Volume Control System 3~2 1 3.3 Emergency Core Cooling System Auxiliary Cooling Systems, Air Recirculation Fan Coolers, Containment Spray, and Charcoal Filters 3 ~3 1 3.4 Turbine Cycle 3.4-1 3.5 Instrumentation System 3.5-1 3.6 Containment System 3.6-1 3.7 Auxiliary Electrical Systems 3 7 1

~

3.8 Refueling 3. 8-1 3.9 Plant Effluents 3. 9-1

3. 10 Control Rod and Power Distribution Limits 3.10-1 3.11 Fuel Handling in the Auxiliary Building 3.11-1 3.12 Movable In-Core Instrumentation 3.12-1 3.13 Shock Suppressors (Snubbers) 3.13-1 3.14 Fire Suppression System 3.14-1 3.15 Radiological Environmental Monitoring 3.15-1

I TABLE OF CONTENTS (cont.)

~Pa e 4.0 SURVEILLANCE REQUIREMENTS 4.1-1 4.1 Operational Safety Review 4.1-1 4.2 Primary Components Tests 4.2-1 4.3 Primary System Testing Following Opening 4.3-1 Containment Tests 4.4-1 4.5 Safety Injection, Containment Spray and Iodine Removal Systems Tests 4.5-1 4.6 Emergency Power System Periodic Tests 4.6-1 4.7 Main Steam Stop Valves 4.7-1 4.8 Auxiliary Feedwater System 4.8-1 4.9 Reactivity Anomalies 4.9-1 4.10 Radiological Environmental Monitoring 4.10-1 4.11 Spent Fuel Pit Charcoal Adsorber Testing 4.11-1 4.12 Effluent Surveillance 4.12-1 4.13 Radioactive Material Source Leakage Test 4.13-1 4.14 Shock Suppressors (Snubbers) 4.14-1 4.1S Fire Suppression System Test 4.15-1 5.0 DESIGN FEATURES 5.1 Site 5.1-1 5.2 Containment, Design Features 5.2-1 5.3 Reactor Design Features 5.3-1 S.4 Fuel Storage 5.4-1 5.5 Waste Treatment Systems 5.5-1 6.0 ADMINISTRATIVE CONTROLS 6.1 Responsibility 6.1-1 6.2 Organization 6.1-1 6.2.1 Offsite 6.1-1 6.2.2 .Facility Staff 6.1-1 6.3 Station Staff Qualifications 6.3-1 6.4 Training 6.5 Review and Audit 6.5.1 Plant Operations Review Committee (PORC) 6.5-1 6.5.2 Nuclear Safety Audit and Review Board (NSARB) 6.5-5 6.5.3 Quality Assurance Group 6.5-11 6.6 Reportable Occurrence Action 6.6-1 6.7 Safety Limit Violation 6.6-1 6.8 Procedures 6.8-1 6.9 Reporting Requirements 6.9-1 6.9.1 Routine Reports 6.9-1 6.9.2 Reportable Occurrence 6.9-3b 6.9.3 Unique Reporting Requirements 6.9-10 6.10 Record Retention 6.10-1 6.11 Radiation Protection Program 6.11-1 6.12 (Deleted) 6.13 High Radiation Area 6. 13-1 6.14 Offsite Dose Calculation Manual 6.14-1 6.15 Major Changes to Radioactive Waste Treatment Systems 6.15-1

0 eratin Performing all intended functions in the intended manner..

De ree of Redundanc Instrument Channels The difference between the number of operable channels and the number of channels which, when tripped, will cause an automatic system trip.

Instrument Surveillance Channel Calibration The adjustment, as necessary, of the channel output so that it responds with the necessary range and accuracy to known values of the parameter which the channel moni-tors. The Channel Calibration shall encompass the entire channel including the sensor and alarm and/or trip func-tions, and shall include the Channel Functional Test.

The Channel Calibration may be performed by any series of sequential, overlapping or total channel steps so that the entire channel is calibrated.

Channel Check The qualitative assessment of channel behavior during operation by observation. This determination shall in-elude, where possible, comparison of the channel indica-tion and/or status with other indications and/or status derived from independent instrumentation channels measur-ing the same parameter.

1 Channel Functional Test

a. Analog channels - the injection of a simulated signal into the channel as close to the sensor as practicable to verify operability including alarm and/or trip funci ions.
b. Bistable channels the injection of a simulated signal into the sensor to verify operability includ-ing alarm and/or trip function.

Source Check The qualitative assessment. of channel response when the channel sensor is exposed to a radioactive source.

1-2a

I Fre uenc Notation The frequency notation specified for the performance of surveillance requirements shall correspond to the inter-vals defined below.

Notation Fre uenc S, Each Shift At least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> .

D, Daily At least once per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Twice per week At least once per 4 days and at least, twice per 7 days W, Weekly At least once per 7 days B/W, Biweekly At least once per 14 days N, Nonthly At, least. once per 31 days B/N, Bimonthly At least once per 62 days Q, Quarterly At least once per 92 days SA, Semiannually At least once per 6 months A, Annually At least once per 12 months R, Refueling At least once per 18 months Prior to each startup N.A. Not Applicable Within 12 hours prior to each release Offsite Dose Calculation Nanual ODCN The ODCN is a manual containing the methodology and parameters to be used for calculating the offsite doses due to liquid and gaseous effluents and in calculation of liquid and gaseous effluent monitoring instrumentation alarm/trip setpoints.

'1-5

~ I 3.5 Instrumentation S stem 0 erational Safet Instrumentation

~11'pplies to plant instrumentation systems.

~b'o delineate the. conditions of the plant instrumenta-tion and safety circuits necessary to assure reactor safety and to limit the release of radioactive materials.

'f'or 3.5.1 on-line testing or in the event of a sub-system instrumentation channel failure, plant operation at rated power shall be permitted to continue in accordance with Tables 3.5-1 through 3.S-3.

3.5.2 In the event the number of channels of a particular sub-system in service falls below the limit given by the columns entitled Minimum Operable Channels and/or Minimum Degree of Redundancy cannot be achieved, opera-tion shall be limited according to the requirement shown in Column 6 of Tables 3.S-1 through 3.5-3.

3.5.3 The radioactive effluent monitoring instrumentation shown in Table 3.5-4 shall be operable with alarm/trip setpoints set to ensure that the limits of Specifica-tions 3.9.1.1 and 3.9.2.1 are not exceeded.

3.S.3.1 If a radioactive effluent monitoring instrumentation alarm/trip setpoint, is less conservative than required, immediately suspend the release of effluents. monitored by the affected channel or declare the channel inoperable.

3.5-1

I f If, during a release, the number of channels which are operable is less than reguired, take the action shown in Table 3.5-4.

Basis:

During plant operations, the complete instrumentation

')

systems will normally be in service. Reactor safety is provided by the Reactor Protection System, which auto-matically initiates appropriate action to prevent.

exceeding established limits. Safety is not compromised, however, by continuing operation with certain instru-mentation channels out, of service since provisions were made for this in the plant design. This specification outlines limiting conditions for operation necessary to preserve the effectiveness of the reactor control and protection system when any one or more of the channels is out of service.

Almost all reactor protection channels are supplied with sufficient redundancy to provide the capability for channel calibration and test at power. Exceptions are backup channels such as reactor coolant pump breakers.

The removal, of one trip channel is accomplished by placing that channel bistable in a tripped mode; e.g.,

a two-out-of-three circuit becomes a one-out-of-two circuit. .Testing does not trip the system unless a trip condition exists in a concurrent channel.

3.5-2

~ J 3.9 Plant Effluents A licabilit Applies to the release of radioactive liquids and gases from the plant.

~b'o define the conditions for release of radioactive liquid and gaseous wastes.

S ecifications 3.9.1 Li uid Effluents 3.9.1.1 Concentration 3.9.1.1.a The release of radioactive liquid effluents shall be such that the concentration of gross beta activity above background in the circulating water discharge does not exceed the limits stated below unless the discharge is controlled on a radionuclide basis in accordance with Appendix B, Table II, Column 2 and Note 1 thereto of 10CFR20.

Maximum concentration (excluding tritium and dissolved or entrained noble gases) 1 x 10 uCi/ml Maximum tritium concentration 3 x 10 uCi/ml Maximum dissolved or entrained noble gas concentration 2 x 10 uCi/ml 3.9.1.1.b During release of liquid radioactive wastes, at least one condenser circulating water pump shall be in opera-tion.

3.9-1

~ > l 3.9.1.1.c If the limits of 3.9.1.1.a and 3.9.1.1.b are not, met, restore the concentration to within the limits or initiate normal orderly shutdown of the liquid waste discharge within one hour.

3.9.1.2 Dose 3.9.1.2.a The dose or dose commitment to an individual from radioactive materials in liquid effluents released to unrestricted areas shall be limited:

(i) During any calendar quarter to < 1.5 mrem to the total body and to <5 mrem to any organ, and (ii) During any calendar year to < 3 mrem to the total body and to < 10 mrem to any organ.

3.9.1.2.b Whenever the calculated dose resulting from the release of radioactive materials in .liquid effluents exceeds the limits of 3.9.1.2.a(i), a report shall be submitted to the Commission within thirty days which identifies the cause for exceeding the dose limit and defines cor-rective actions to be Waken to reduce the releases of radioactive material in liquid effluents.

3.9.1.3 K,iquid Waste Treatment 3.9.1.3.a The system shall be used to reduce the radioactive materials in liquid wastes prior to their discharge when the projected dose due to projected liquid effluent releases when averaged over 31 days would otherwise exceed 0.'25 mrem to the total body or 0.8 mrem to any organ.

3.9-2

~ k l 3.9.1.3.b If radioactive liquid waste is being discharged without treatment. when reguired by Specification 3.9.1.3.a, prepare and submit, a report to the Commission within 30 days which includes the following information:

(i) Identification of equipment or subsystems not operated and the reasons.

(ii) Action(s) taken to restore the inoperable eguipment to operable status.

(iii) Summary description of action(s) taken to prevent a recurrence.

3.9.2 Gaseous Wastes 3.9.2.1 Release Rate 3.9.2.l.a The dose rate, at any time, due to radioactive materials released in gaseous effluents from the site shall be limited to the following values:

(i) The dose rate for noble gases shall be < 500 mrem/yr to the total body and < 3000 mrem/yr to the skin, and (ii) The dose rate for all radioiodines, radioactive materials in particulate form, and radionuclides other than noble gases with half lives greater than 8 days shall be < 1500 mrem/yr to any organ.

3.9.2.1.b For unplanned release of gaseous wastes, compliance with 3.9.2.1.a may be determined by averaging over a 24-hour period.

3.9-3

~ l 3.9.2.1.c During planned release of gaseous waste from Gas Decay Tanks to the Auxiliary Building Vent, at least one auxiliary building exhaust, fan shall be in operation.

3.9.2.1.d If the limits of 3.9.2.1 above are not met for contain-ment purge or Gas Decay Tank release, decrease the release rate from that. system to comply with the limits, or initiate normal orderly shutdown of that gaseous release within one hour.

3.9.2.2 Dose (10 CFR Part 50, Appendix I) 3.9.2.2.a The air dose due to noble gases released in gaseous effluents from the site shall be limited to the follow-ing:

(i) ,During any calendar quarter to 5 mrad for gamma radiation and to 10 mrad for beta radiation.

(ii) During any calendar year 10 mrad for gamma radia-tion and 20 mrad for beta radiation.

3.9.2.2.b The dose to an individual from radioiodine, radioactive materials in particulate form and radionuclides other than noble gases with half-lives greater than eight days released with gaseous effluents .from th site shall be limited to the following:

(i) During any calendar quarter to 7.5 mrem to any quarter.

(ii) During any calendar year to 15 mrem to any quarter.

3.9-4

~4 3.9.2.2.c Whenever the calculated dose to an individual resulting from noble gases or from radionuclides other than noble gases exceeds the limits of 3.9.2.2.a(i) or 3.9.2.2.b(i),

a report shall be submitted to the Commission within 30 days which identifies the cause for exceeding the dose limit and defines corrective actions to be taken to reduce the releases of radioactive material in gaseous effluents.

3.9.2.3 Gaseous Waste Treatment 3.9.2.3.a The gaseous radwaste treatment system shall be used to reduce radioactive materials in gaseous waste prior to their discharge when the projected air doses due to gaseous effluent releases to unrestricted areas when averaged over 31 days would otherwise 'exceed 0.8 mrad for gamma radiation and 1.7 mrad for beta radiation.

3.9.2.3.b The ventilation exhaust system shall be used to reduce radioactive materials in gaseous waste prior to their discharge when the projected doses due to gaseous effluent releases from the site when averaged over 31:

days would otherwise exceed 1.25 mrem to any organ.

3.9.2.3.c If gaseous waste is being discharged without treatment when reguired by Specifications 3.9.2.3.a or 3.9.2.3.b, prepare and submit a report to the Commission within C

3.9-5

~ 4 1

~

30 days which includes the following information:

(i) Identification of equipment or subsystems not operated and the reasons.

(ii) Action(s) taken to restore the inoperable equip-ment to operable status.

(iii) Summary description of action(s) taken to prevent a recurrence.

3.9.2.4 Dose (40 CFR Part 190) 3.9.2.4.a If the calculated dose from the release of radioactive materials from the plant in liquid or gaseous effluents exceeds twice the limits of Specifications 3.9.1.2.a, 3.9.2.2.a, or 3.9.2.2.b, prepare and submit a report to the Commission and limit the subsequent. releases such that the dose or dose commitment to a real individual is limited to < 25 mrem to the total body or any organ (except thyroid, which is limited to < 75 mrem) over the quarter in which the limits were exceeded plus the subsequent three quarters. This report shall include an analysis which demonstrates that radiation exposure's to all real individuals from the plant are less than the 40 CFR Part 190 limits. Otherwise, obtain a vari-ance from the Commission to permit releases to exceed 40 CFR Part 190.

3. 9-6

~ ~ t\

4$

3.9.2.5 Explosive Gas Nixture 3.9.2.5.a The concentration of'xygen in each gas decay tank shall be limited to < 2% by volume.

3.9.2.5.b If the concentration of oxygen in a gas decay tank is >

2% by volume but. < 4% by volume, restore the concentra-tion of oxygen to within the limit within 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br />.

3.9.2.5.c If the concentration of oxygen in a gas decay tank is >

4% by volume, immediately suspend all additions of waste gases to that gas decay tank*and reduce the concentration of oxygen to < 2% within 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br />.

Basis Iiguid wastes from the Radioactive Waste Disposal System are diluted in the Circulating Water System discharge prior to release to the lake. With two pumps operating, the capacity of the Circulating Water System is 400,000 gpm. Operation of a single circulating water pump reduces the nominal flow rate by about 50%.

The circulating water flow under various operating conditions has been calculated from the head differential across the pumps and the manufacturer's head-capacity curves. Because of the low radioactivity levels in the circulating water discharge, the concentration of liquid radioactive effluents at. this point will not be measured directly. The concentration in the circulating water discharge will be calculate'd from the measured concentration in the Waste Condensate Tank, the flow 3.9-7

1' rate of the Waste Condensate Pumps, and the flow in the Circulating Water System. Radioactive effluents released to unrestricted areas on the basis of gross beta analysis are based on the assumption that I-129 and 'radium are not present,. Accordingly, Appendix B, Table II, Column H

2 of 10CFR20 will permit a concentration up to 1 x 10 uCi/ml in the circulating water discharge. If the con-centration of liquid wastes in the circulating water discharge equals NPC as specified, the average concentra-tion at the intake of the nearest, public water supply at Ontario, New York, would be well below NPC.

Thus, discharge of liquid wastes at. the specified maximum concentrations will not result in significant exposure to members of the public as a result of consump-tion of drinking water from the lake, even if the effects of potable water treatment systems on reducing radioactive concentration of the water supply are neglected.

The concentration limit for noble gases is based upon the assumption that. Xe-135 is the controlling radio-isotope and its NPC in air was converted to an equivalent concentration in water using ICRP Publication 2 method-ology.

Specification 3.9.1.2 is provided to implement. the requirements of Sections II.A, III.A and -IV.A of Appendix I. The Limiting Condition for Operation implements the guides set. forth in Section II.A of Appendix I. The 3.9-8

I

\

8

Specifications provide the required operating flexi-bility and at the same time implement the guides set.

forth in Section IV.A of Appendix I. The dose calcula-tions in the ODCN implement the requirements in Section III.A of Appendix I that conformance with the guides of Appendix I is to be shown by calculational procedures based on models and data such that the actual exposure of a real individual through appropriate pathways is unlikely to be substantially underestimated. The requirements that the appropriate portions of this system be used when specified provides assurance that the releases of radioactive materials in liquid effluents will'e kept "as low as is reasonably achievable."

This specification implements the requirements of 10 CFR Part 50.36a, General Design Criterion 60 of Appendix A to 10 CFR Part 50 and design objective Section II.D of Appendix I. The limits governing the use of appro-priate portions of the liquid radwaste'reatment system were specified as a suitable fraction of the guide set forth in Section II.A of Appendix I for liquid effluents.

A dose projection which exceeds the stated limit does not necessarily imply that all portions of the liquid radwaste treatment system be used because certain subsystems may have minimal effects on'educing doses.

Specification 3.9.2.1 is provided to ensure that, the dose rate at. any time at, the site boundary from gaseous effluents will be within the annual dose limits of 10

3. 9-9

el Cl

CFR Part 20 for unrestricted areas. The annual dose limits are the doses associated with the concentrations of 10 CFR Part 20, Appendix B, Table II. These limits provide reasonable assurance that radioactive material discharged in gaseous effluents will not result in the exposure of an individual in an unrestricted area, to annual average concentrations exceeding the limits specified in Appendix B, Table II of 10 CFR Part 20 (10 CFR Part 20.106(b)). For individuals who may at, times be within the site boundary, these occupancy times will be sufficiently small to compensate for any increase in the atmospheric diffusion factor above that for the site, boundary.

Specification 3.9.2.2 is provided to implement the requirements of Sections II.B, II.C, III.A and IV.A of Appendix I. The limiting Condition for Operation implements the guides set forth in Sections II.B and II.C of Appendix I. The Specifications provide the required operating flexibility and at, the same time implement the guides set forth in Section IV.A of Appendix I.

The requirement that the appropriate portions of the gaseous radwaste treatment system and the ventilation exhaust treatment system be used when specified provides reasonable assurance that. the releases of radioactive materials in gaseous effluents will be kept "as low as is reasonably achievable." This specification implements 3.9-10

the requirements of 10 CFR Part 50.36a, General Design Criterion 60 of Appendix A to 10 CFR Part, 50, and design objective Section II.D of Appendix I. The limits governing the use of appropriate portions of the systems were specified as a suitable fraction of the guide set forth in Sections II.B and II.C of Appendix I, 10 CFR Part 50, for gaseous effluents.

A dose projection which exceeds the stated limit does not necessarily imply that all portions of the gaseous and ventilation exhaust treatment. systems be used because certain subsystems may have minimal effect on reducing doses.

Specification 3.9.2.4 is provided to meet, the reporting requirements of 40 CFR 190. Since the plant is well removed from other fuel cycle facilities, it, is suffi-cient to apply the Specification only to the plant.

Specification =-3.9.2.5 is provided to ensure that the concentration of potentially explosive gas mixtures contained in the gas decay tanks are maintained below the flammability limit of oxygen. Naintaining the concentration of oxygen below its flammability limits provides assurance that the releases of radioactive materials will be controlled in conformance with the requirements of General Design Criterion 60 of Appendix A to 10 CFR Part 50.

3.9-11

~ P Ill

References (1) FSAR, Section 10.2 (2) FSAR, Section 2, Appendix 2A (3) FSAR, Sections 2.6 and 2.7 3.9-12

~ l I Radiolo ical Environmental Monitorin to routine testing of the plant environs.

b'1'pplies

~b'o establish a program which will assure recognition of changes in radioactivity or exposure pathways in the environs.

~f'onitorin Pro ram 3.15.1.a The radiological environmental monitoring program shall be conducted as specified in Table 3.15-1.

3.15.1.b If the radiological environmental monitoring program is not conducted as specified in Table 3.15-1, prepare and submit to the Commission, in the Annual Radiological Environmental Operating Report, a description of the reasons for not conducting the program as required and the plans for preventing a recurrence. (Deviations are permitted from the required sampling schedule if speci-mens are unobtainable due to hazardous conditions, seasonal unavailability, or to malfunction of automatic sampling equipment. If the latter, every effort shall be made to complete corrective action prior to the end of the next sampling period.)

3.15.1.c If the level of radioactivity in an environmental sampling medium at one or more of the locations specified in the ODCN exceeds the reporting levels of-Table 6.9-2 when averaged over any calendar quarter, a report 3.15-1

~ J shall be submitted to the Commission within 30 days pursuant to Specification 6.9.2.b(5) which includes an evaluation of any release conditions, environmental factors or other aspects which caused the reporting levels of Table 6.9-2 to be exceeded. This report is not required if '1 the measured level of radioactivity was not the result of plant effluents; however, in such an event, the condition shall be reported and described in .

the Annual Radiological Environmental Operating Report.

3.15.l.d If milk or fresh leafy vegetable samples are unavailable for more than one sample period from one or more of the sampling locations required by the ODCN, prepare and 7

submit to the Commission within 30 days a report which identifies the cause of the unavailability of samples and identifies locations for obtaining replacement samples. If a milk or leafy vegetable sample location becomes unavailable, alternate sample locations within 5 miles of the plant will be reviewed. The locations from which samples were unavailable may then be deleted from the ODCN provided that, the alternate locations are added to the environmental monitoring program.

3.15.2 Land Use Census 3.15.2.a A land use census shall be conducted and shall identify the location of the nearest. milk animal and the nearest residence in each of the 16 meteorological sectors within a distance of five miles.

3.15-2

I 3.15.2.b If a land use census identifies a location(s) which" yields a calculated dose or dose commitment greater than that of the maximally exposed individual currently being calculated in Specification 4.12.2.2, prepare and submit a report to the Commission within 30 days which identifies the new location(s).

3. 15.2. c If a land use census identifies a milk location(s) which yields a calculated dose or dose commitment greater than that at a location from which samples are currently being obtained in accordance with Specifica-tion 3.15.1, prepare and submit a report, to the Com-mission within 30 days which identifies the new location.

The new location shall be added to the radiological environmental monitoring program within 30 days, if possible. The milk location having the lowest calculated dose or dose commitment may be deleted from this monitor-ing program after October 31 of the year in which this land use census was conducted.

3.15.3 Interlaborator Com arison Pro ram 3.15.3.a Analyses shall be performed on applicable radioactive materials supplied as part of an interlaboratory com-parison program which has been approved by NRC, if such a program exists.

3.15.3.b If analyses are not performed as required above, report the corrective actions taken to prevent a recurrence in the Annual Radiological Environmental Operating Report.

3.15-3

I Ck

Basis The radiological monitoring program required by this specification provides measurements of radiation and of radioactive materials in those exposure pathways and for those radionuclides which lead to the highest

'I potential radiation exposures of individuals resulting from the station operation. This monitoring program thereby supplements the radiological effluent monitoring program by verifying that the measurable concentrations of radioactive materials and levels of radiation are not higher than expected on the basis of the effluent measurements and modeling of the environmental exposure pathways. The initially specified monitoring program will be effective for at least three years. Following this period, program changes may be initiated based on operational experience.

Specification 3.15.2 is provided to ensure that changes in the use of unrestricted areas are identified and that modifications to the monitoring program are made if required by the results of this census. A garden census is not required since an onsite garden will be used. This census satisfies the requirements of Section IV.B.3 of Appendix I to 10 CFR Part 50.

The requi'rement for participation in an interlaboratory comparison program is provided to ensure that independent checks on the precision and accuracy of the measurements of radioactive material in environmental sample matrices 3.15-4

are performed as part of a quality assurance program for environmental monitoring in order to demonstrate that the results are reasonably valid. Only samples with radioactivity levels comparable to levels in environmental samples need be analyzed.

3.15-5

J TABLE 3.15-1 RADIOLOGICAL ENVIRONMENTAL MONITORING PROGRAN Number of Sam les Ez osure Pathwa an Sam lin and T e and Fre uenc and or Sam le Sam le Locate.ons Co lection Fre uenc of Anal sos

l. AIRBORNE
a. Radioiodine 3 on site Continuous operation Radioiodine canister.

of sampler with sample Analyze at least once collection at least per 7 days for I-131.

once per 7 days.

Cr> b. Particulates 5 on site Particulate sampler, 2 off site Analyze for gross beta Ul radioactivity > 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Ch following filter change.

Perform gamma isotopic analysis on each sample for which gross beta activity is > 10 times the mean of offsite samples. Perform gamma isotopic analysis on composite (by location) sample at least once per 92 days.

2." DIRECT RADIATION Film at least. once per Gamma dose monthly.

month.

or or TLD's at least Gamma dose quarterly.

quarterly.

P TABLE 3.15-1 CONTINUED RADIOLOGICAL ENVIRONNENTAL NONITORING PROGRAM Number of Sam les Ex osure Pathwa and/or le and Sam lin and T e and Fre uenc Sam Sam e Locations Collection Fre uenc of Anal sz.s

3. WATERBORNE
a. Surface 1 Gamma isotopic analysis Inlet Condenser Water Composite sample of each sample. Tritium collected daily over analysis of sample at a period of < 31 days least once per 92 d'ays.
b. Drinking 1 Composite sample col- Gross beta and gamma Ontario Water District lected daily over a isotopic analysis of Intake period of < 31 days. each composite sample.

4J Tritium analysis of one composite sample at leas Vl I

once per 92 days

S TABLE 3.15-1 CONTINUED RADIOLOGICAL ENVIRONMENTAL MONITORING PROGRAM Number of Sam les Ex osure Pathwa and Sam lin and T e and Fre enc and or Sam le -Sam le Locate.ons Collection Fre uenc of Anal sos

4. INGESTION
a. Milk 3 At least once per 15 Gamma isotopic and June through October days I-131 analysis of each each of 3 farms sample.

1 At least once per 31 Gamma isotopic and November thru May days. I-131 analysis of each one of the farms sample.

b. Fish 8 Twice during fishing Gamma isotopic analysis Off shore at. Ginna season including at on edible portions of least four species each sample.
c. Food Products 2 Annual at time of Gamma isotopic analysis On site harvest. One sample on edible portion of of: sample.
1. apples
2. cherries 2 At time of harvest. I-131 analysis On site garden One sample of:
1. broad leaf vegetation
2. squash

~P J

4.0 SURVEIIIANCE RE UIREPIENTS Specified intervals may be adjusted plus or minus 25% to accommodate normal test schedules.

4.1 0 erational Safet Review

~l.1'pplies to items directly related to safety limits and limiting conditions for operation.

~b'o specify the minimum frequency and type of surveillance to be applied to plant equipment and conditions.

'f'alibration, 4.1.1 testing, and checking of analog channel and testing of logic channel shall be performed as specified in Table 4.1-1.

4.1.2 Equipment and sampling tests shall be conducted as specified in Table 4.1-2.

4.1.3 Each radioactive effluent monitoring instrumentation channel shall be demonstrated operable by performing the channel check, source check, channel functional test, and channel calibration at the frequency shown in Table 4.1-3.

Basis:

Check Failure such as blown instrument fuses, defective in-dicators, faulted amplifiers which r'esult in "upscale" or "downscale" indication can be easily recognized by simple observation of the functioning of an instrument or system.

Furthermore, such failures are, in many cases, revealed 4.1-1

4 C

TABLE 4.1-1 (CONTINUED)

Channel Check Calibrate Test Remarks

10. Rod Position Bank S(1,2) N.A. N.A; 1) Each six inches of rod motion Counters when data logger is out of service
2) With analog rod position
11. Steam Generator Level R
12. Charging Flow N.A. R N.A.
13. Residual Heat Removal N.A. N.'A.

Pump Flow

14. Boric Acid Tank Level D R N.A. Bubbler tube rodded weekly
15. Refueling Water Storage N.A. R N.A.

Tank Level Volume Control Tank N.A. N.A.

Level Reactor Containment D M(1) 1) Isolation Valve signal Pressure

18. Radiation Monitoring D Area Monitors Rl to R9 System System Monitors R16, R17, and R20
19. Boric Acid Control N.A. R N.A.
20. Containment Drain N.A. R N.A.

Sump Level

21. Valve Temperature N.A. N.A.

Interlocks

22. Pump-Valve Interlock N.A. N.A.
23. Turbine Trip Set-Point, N.A. R M(1) 1) Block trip
24. Accumulator Level and R N.A.

Pressure

k Radiolo ical Environmental Monitorin

~11' ppl' '

1 pl environs.

~b' -* bl' pl' ~ ly '

g which will assure recognition of changes in radioactivity in the environs.

'1'he radiological environmental monitoring samples shall be collected pursuant to Table 3.15-1. Acceptable locations are shown in the ODCM. Samples shall be analyzed pursuant to the requirements of Tables 3.15-1 and 4.10-1.

A land use census shall be conducted annually (between June 1 and October 1).

Basis The environmental survey has been designed to utilize the knowledge about dilution in the atmosphere and in the lake which has been gained during the pre-operational and operational period of study.

The radiological monitoring program provides measurements of radiation and of radioactive materials in those pathways and for those radionuclides which 'xposure lead to the highest potential radiation exposures of individuals resulting from the station operation. This monitoring program thereby supplements the radiological effluent monitoring program by verifying that the 4.10-1

k measurable concentrations of radioactive materials and levels of radiation are not higher than expected on the basis of the effluent measurements and modeling of the environmental exposure pathways.

The detection capabilities required by Table 4.10-1 are state-of-the-art for routine environmental measurements in industrial laboratories. The specified lower limits of detection for I-131 in water, milk, and other food products correspond to approximately one-quarter of the Appendix I to 10 CFR Part 50 design objective dose-equivalent of 15 mrem/year for atmospheric releases and 10 mrem/year for liquid releases to the maximally exposed organ and individual.

Reference:

FSAR Section 2.10 4.10-2

I TABLE 4.10-1 NAXINUN VALUES FOR THE LOWER LINITS OF DETECTION (LLD)

~

To be achieved on 98% of analyses Airborne Particulate Water or Gay Fish. Nilk Food Products Analysis (pCi/1) (pCi/m ) (pCi/kg, wet) (pCi/1) (pCi/kg,wet) gross beta 4 1 X 10 H 2000 (1000 )

54 15 130 Nn 59 30 260 Fe 5'60Co 13Q 95Zr-M 131I 1 7 X 10 60 4, 15(10 ),18 1 X 10 130 15 60 Ba-La 15 15

I TABLE 4.10-1 CONTINUED TABIE NOTATION a - The LLD is the smallest concentration of radioactive material in a sample that will be detected with 95% probability with only 5% probability of falsely concluding its presence.

For a particular measurement system (which may include radio-chemical separation):

4.66 s E . V . 2.22 . Y . exp(-Aht) where LLD is the lower limit of detection as defined above (as pCi per unit mass or volume)

S is the standard deviation of the background counting ate or of the counting rate of a blank sample as appropriate (as counts per minute).'

is the counting efficiency (as counts per transformation)

V is the sample size (in units of mass or volume) 2.22 is the number of transformations per minute per picocurie Y is the fractional radiochemical yield (when applicable)

A, is the radioactive decay constant for the particular radionuclide b,t is the elapsed time between sample collection and analysis The value of s used in the calculation of the ILD for a detection system shall be based on the actual observed'ariance of the background counting rate or of the counting rate of the blank samples (as appropriate) rather than on an unverified theoretically predicted variance. In calculating the LLD for a radionuclide determined by gamma-ray spectrometry, the back-ground shall include the typical contributions of other radio-nuclides normally present in the samples (e.g., potassium-40 in milk samples). Typical values of E, V, Y and bt should be used in the calculations.

Analyses shall be performed in such a manner that the stated LLDs will be achieved under routine conditions.. Occasionally background fluctuations, unavoidably small sample sizes, the presence of interferring nuclides, or other uncontrollable cir-cumstances. may -render these LLDs unachievable. In such cases, the contributing factors will be identified and described in the Annual Radiological Environmental Operating Report.

4.10-4

J 4 TABLE 4.10-1 CONTINUED TABLE NOTATION 2(f The LLD is defined as an a representing the capability measurement.

h f )I5 'I riori (before the fact) limit o a measurement system and not

~

b - LLD for drinking water.

c Total for parent and daughter.

4.10-5

J 4

~ 4. 12 Effluent Surveillance A licabilit, Applies to the periodic test, and record requirements of the plant effluents.

~b To ascertain that radioactive liquid and gaseous releases from the plant are within allowable limits.

S ecifications 4.12.1 Liquid Effluents 4.12.1.1 Concentration 4.12.1.1.a The concentration of radioactive material at any time in 'liquid'ffluents released from the site shall be continuously monitored in accordance with Table 3.5-4.

4.12.1.1.b The liquid effluent continuous monitors listed in I.

Table 3.5-4 having provisions for automatic termina-h tion of liquid releases shall be used to limit the concentration of radioactive material released at .any time from the site to the values given in Specification 3.9.1.l.a.

4.12.l.l.c The radioactivity content, of each batch of radioactive liquid waste to be discharged shall be -determined prior to release by sampling and analysis in accordance with Table 4.12-1. The results of pre-release analyses shall be used with the calculational methods in the ODCN to assure that the concentration at the point of release is limited to the values in- Specification 3.9.1.l.a.

4.12-1'

J I I

4.12.1.1.d Post,-release analyses of samples composited from batch r'eleases shall be performed in accordance with Table 4.12-1. The results of the post,-release analyses shall be used with the calculational methods in the ODCM to assure that the dose commitments from liquids were limited to the values in Specification 3.9.1.2.a.

4.12.1.2 Dose 4.12.1.2.a Cumulative dose contributions from liquid effluents shall be determined in accordance with the Offsite Dose Calculational Manual (ODCM) at least once per 31 days.

4.12.1.3 Liquid Waste Treatment 4.12.1.3.a Doses due to liquid releases to unrestricted areas shall be projected at least once per 31 days.

4.12.2 Gaseous Wastes 4.12.2.1 Release Rate 4.12.2.1.a The release rate, at. any time, of noble gases in gaseous effluents shall be controlled as established in Specification 3.9.2.1.

4.12.2.1.b The gas effluent continuous monitors as listed in Table 3.5-4 having provisions for the automatic termina-tion of gaseous releases, shall be used to limit releases within the values established in Specification 3.9.2.1 when monitor setpoint values are exceeded.

4.12-2

4.12.2.1.c The release rate of radioactive materials, other than noble gases, in gaseous effluents shall be determined by obtaining representative samples and performing analyses in accordance with the sampling and analysis program, specified in Table 4.12-2.

4.12.2.2 Dose (10 CFR Part, 50, Appendix I) 4.12.2.2.a Cumulative dose contributions for the total time period shall be determined in accordance with the Offsite Dose Calculation Nanual (ODCN) at least once every 31 days.

4.12.2.3 Gaseous Waste Treatment 4.12.2.3.a Doses due to gaseous releases to unrestricted areas shall be projected at least once per 31 days.

4.12.2.4 Dose (40 CFR Part 190) 4.12.2.4.a If required by Specification 3.9.2.4 cumulative dose contributions from liquid and gaseous effluents shall be determined in accordance with the Offsite Dose Calculational Nanual.

4.12.2.5 Explosive Gas Nixture 4.12.2.5.a The concentration of oxygen in waste gas system shall be monitored as required by Table 3.5-4.

4.12-3

A Basis:

Sufficient tests will be made to be certain that, radio-active materials are not released to the environment in quantities greater than allowable. Installed radia-tion monitoring equipment in the plant will be used in conjunction with laboratory analyses to maintain sur-veillance of normal effluents.

Sufficient records will be maintained to determine the concentration of radioactive materials in unrestricted areas. Isotopic analysis of representative samples will serve to verify the accuracy of routine samples by identification of significant energy peaks.

4.12-4

)i' TABLE 4.12-1 RADIOACTIVE LIQUID WASTE SAHPLING AND ANALYSIS PROGRAH Sampling Hinimum Type of Activity Lower Limit Liquid Release Type Frequency Analysis Analysis of Detection Frequency (LLD)

(uCi/ml)

-7 b Batch Waste P P 1. Principa) Gamma 5 x 10 Release Tanks Each Batch Each Batch Emitters and I-131 1x10 -6 or

2. Gross Beta:"

P Dissolved and 1 x 10 One Batch/51 Entrained Gases (Gamma Emitters) 1x10 P H c

Each Batch Composite Gross alpha 1x10 P-32 1 x 10 P e c

Each Batch Composite Sr-89, Sr-90 5x10 Fe-55 1x10 -6

-If gross beta is performed for batch releases, then a weekly composite shall also be analyzed for Principal Gamma Emitters and I-131.

4.12-5

I L TABLE 4.12-1 CONTINUED TABLE NOTATION The LLD is the smallest concentration of radioactive material in a sample that will be detected with 95% probability with S% probability of falsely concluding that, a blank observation representa a "real" signal.

For a particular measurement system (which may include radiochemical separation):

LLD = 4.66sb E . V . 2.22 x 10 . Y . exp -Ab,t) where LLD is the lower limit of detection as defined above (as uCi per unit mass or volume) s is the standard deviation of the background counting r te or of the counting rate of a blank sample as appropriate (as counts per minute)

E is the counting efficiency (as counts per transforma-tion)

V is the sample size (in units of mass or volume) 2.22 x 10 is the number of transformations per minute per microcurie Y is the fractional radiochemical yield (when applicable)

A. is the radioactive decay constant for the particular radionuclide ht is the elapsed time between midpoint of sample col-lection and time of counting (for plant effluents, not environmental samples).

The value of s used in the calculation of the LLD for a detection system shall be based on the actual observed variance of the background counting rate or of the counting rate of the blank samples (as appropriate) rather than on an unverified theoretically predicted variance. In calculating

.the LLD for a radionuclide determined by gamma-ray spectrometry, the background shall include the typical contributions of other radionuclides normally present in the samples. Typical values of E, V, Y and ht should be used in the calculation.

4.12-6

The background count rate is calculated from the background counts that are determined to be within + one FWHN energy band about the energy of the gamma ray peak used for the quantitative analysis for this radionuclide.

f @*5~(f It should be recognized that the LLD is defined as an a priori (before the fact) limit representing the capability fact) limit for a particular measurement.

h Analyses shall be performed in such a manner that the stated LLDs will be achieved under routine conditions. Occasionally background fluctuations, unavoidably small sample sizes, the presence of interferring nuclides, or other uncontrollable circumstances may render these LLDs unachievable. When circumstances result in LLDs higher than required, the reasons shall be documented in the Semiannual Radioactive Effluent, Report.

For certain radionuclides with low gamma yield or low energies, or for certain radionuclide mixtures, it may not be possible to measure radionuclides in concentrations near the LLD.

Under these circumstances, the LLD may be increased inversely propoPionally .to the magnitude of the gamma yield (i.e., 5 x 10 /I, where I is the photon abundance expressed as a decimal fraction), but in no case shall the LLD, as calculated in this manner for a specific radionuclide, be greater than 10% of the NPC value specified in 10 CFR 20, Appendix 8, Table II, Column II.

A composite sample is one in which the quantity of liquid sampled is proportional to the quantity of liquid waste dis-charged and in which the method of sampling employed results in a specimen which is representative of the liquids released.

The principal gamma emitters for which the LLD specification will apply are exclusively the following radionuclides:

Nn-54, Fe-59, Co-58, Co-60, Zn-65, Cs-134, Cs-137, and Ce-141. This list does not mean that, only these nuclides are to be detected and reported. Other peaks which are measurable and identifiable, together with the above nuclides, shall also be identified and reported. Nuclides which are below the LLD for the analyses should be reported as less than the LLD and should not be reported as being present at the LLD level. The less than values should not be used in the required dose calculations. When unusual circumstances result in LLD's higher than required, the reasons shall be documented in the semiannual Radioactive Effluent Release Report.

4. 12-7

TABLE 4.12-2 RADIOACTIVE GASEOUS WASTE SAMPLING AND ANALYSIS PROGRAM Minimum Lower Limit of Sampling Analysis Type of Detection fLLD)

Gaseous Release Type Frequency Frequency Activity Analysis (uCi/ml)

P P A. Gas Decay Tank Each Tank Each Tank Principal Gamma Emitters 1 x 1.0 Grab Sample B. Containment Purge Grab

'ach Each Purge cd P

Purge c Principal Gamma Emitters f

~

1 x 10 Sam le H-3 1 x 10 Auxiliary Building Principal Gamma Emitters 10-4b Ventilation Grab -6 Sam le =4b D. Air Ejector Principle Gamma Emitters 1x10 Iran M'c Sam le H-3 1 x 10 E. All Releases Types Continuous I-131 1 x 10 as listed in B and Charcoal C above Sam le I-133 1 x 10 Continuous W P Particulate Principal Gamma Emitters Sample (I-131, Others) 1 x 10-1.1 Continuous M Gross alpha 1 x 10 Composite Particulate Sam le Continuous Q Sr-89, Sr-90 1 x 10 Composite Particulate Sample

5.5 Waste Treatment Systems 5.5.1 Radioactive Liquid Waste Treatment The liquid waste treatment system consists of a'aste Holdup Tank, a Waste Evaporator, a mixed bed de-mineralizer and the Reverse Osmosis unit. Portions

. of the system may be bypassed and still meet the release limits.

5.5.2 Gaseous Radwaste Treatment The gaseous radwaste treatment system consists of four (4)'Gas Decay Tanks and two (2) gas compressors. Only one compressor and three Gas Decay Tanks are necessary to the system.

5.5.3 Ventilation Exhaust System The ventilation exhaust is treated to reduce gaseous radioiodine and material in particulate form by passing through charcoal adsorbers and/or HEPA filters. This system has no effect on noble gas effluents. The com-ponents of the ventilation exhaust system are:

Auxiliary Building HEPA filters Auxiliary Building "G" Charcoal & HEPA filters Auxiliary Building "A" Charcoal Adsorbers Containment Purge Charcoal 8 HEPA filters 5.5-1

AUDITS (Continued)

g. The Facility Fi.re Prote'ction Program and implement-ing procedures at least once per two years.

h.', An independent fire protection and loss prevention program inspection and audit performed at least once per 12 months utilizing either qualified offsite licensee personnel or an outside fire pro-tection firm.

i. An inspection and audit of the fire protection and loss prevention program performed by non-licensee personnel at least once per 36 months. The personnel may be representatives of ANI, an insurance brokerage firm, or other qualified individuals.
j. The radiological environmental monitoring program and the results thereof at least once per 12 months.
k. The Offsite Dose Calculation Manual and implementing procedures at least once per 24 months.
l. Any other area of facility. operation considered appropriate by the NSARB or the Vice President, Electric and Steam Production.

6.5-10

I J AUTHORITY 6.5.2.9 a. The chairman of the Nuclear Safety Audit and Review Board is responsible to the Executive Vice President on all activities for which the review board is responsible.

b. The NSARB shall report to and advise the Vice President, Electric and Steam Production, on those areas of responsibility specified in Sections 6.5.2.7 and 6.5.2.8.

RECORDS 6.5.2.10 Records of NSARB activities shall be prepared, approved, and distributed as indicated below:

6.5-10a

6.8 PROCEDURES 6.8.1 Nritten procedures shall be est a bl'xs e d,, implemented, and mao.ntained covering the activities referenced below:

a. The applicable procedures recommended in Appendix "A", of Regulatory Guide 1.33, November 1972.
b. Refueling operations.
c. Surveillance and test activities of safety related equipment.
d. Security Plan implementation.
e. Emergency Plan implementation.
f. Fire Protection Program implementation.
g. The g'l radiolo ic environmental monitoring program.
h. Offsiteite releases of gaseous and liquid effluents containing radioactive materials.

Offsite Dose Calculation Manual implementation.

6.8.2 Each procedure and administrative policy of 6.8.1 above, and changes thereto, shall be reviewed by the PORC and approved by the Station Superintendent prior to imple-mentation and reviewed periodically as set forth in the applicable procedures.

6.8.3 Temporary changes to procedures of 6.8.1 above may be made provided:

a. The intent of the original procedure is not, altered.
b. The chanhange is approved by two members of the plant management staff, at least one of whom is the Shift Foreman who holds a S enior Reactor Operator's License.

6.8-1

l

c. The change is documented, reviewed by the PORC, and approved by the Station Superintendent within 10 days of implementation.

6.8-2

6.9 Re ortin Re uirements In addition to the 'applicable reporting requirements of Title 10, Code of Federal Regulations, the following identified reports shall be submitted to the Director of the appropriate Regional Office of Inspection and Enforcement unless otherwise noted.

6.9.1 Routine Reports 6.9.1.1 Startu Re ort. A summary report of plant startup and power escalation testing shall be submitted following (1) receipt of an operating license, (2) amendment to the license involving a planned increase in power level, (3) installation of fuel that has a different design or has been manufactured by a different fuel supplier, and (4) modifications that may have sig-nificantly altered the nuclear, thermal, or hydraulic performance of the plant. The report shall address each of the tests performed and shall in general include a description of the measured values of the operating conditions or characteristics obtained dur-ing the test program and a comparison of these values with design predictions and specifications. Any corrective actions that. were required to obtain satis-factory operation shall also be described. Any addi-

\

tional specific details required in license conditions 4

based on other commitments shall be included in this report.

6.9-1

Startup reports shall be submitted within (1) 90 days following completion of the startup test program, or (2) 90 days following resumption of commercial power operation, whichever is earliest. If the Startup Report does not cover both events (i.e., completion of startup test program, and resumption of commercial power operation), supplementary reports shall be sub-mitted at least every three months until both events have been completed.

Nonthl 0 eratin Re ort.. Routine reports of operating statistics and shutdown experience shall be submitted on a monthly basis to the Director, Office of Nanagement Information and Program Control, U.S. Nuclear Regulatory Commission, Washington, D.C. 20555 by the fifteenth of each .month following the calendar month covered by the report. The monthly report shall include a narrative summary of operating experience describing the operation of the facility, including major safety related main-tenance for the monthly period, except that safety related maintenance performed during tne refueling outage may be reported in the monthly report for the month following the end of the outage rather than each month during the outage.

Annual Radiolo ical Environmental 0 eratin Re ort Routine radiological environmental reports covering the operation of the unit during the previous calendar year shall be submitted prior to Nay 1 of each year.

6.9-2

The annual radiological environmental reports shall include summaries, =interpretations, and analysis of trends of the results of the radiological environ-mental surveillance activities for the report period, including a comparison with preoperational studies, operational controls (as appropriate}, and previous environmental surveillance reports and an assessment.

of the observed impacts of the plant operation on the environment. The reports shall also include the results of land use censuses as required.

The annual radiological environmental reports shall include summarized and tabulated results in the format of Table 6.9-1 of all radiological environmental samples taken during the report. period. In the event that some results are not available for inclusion with the report, the report shall be submitted noting and explaining the reasons for the missing results. The missing data shall be submitted as soon as possible in a supplementary report.

The reports shall also include the following: a summary description of the radiological environmental monitoring program including a map of all sampling locations keyed to a table giving distances and direc-tions from the reactor, and the results of the participa-tion in an interlaboratory comparison program.

6.9-3

Note: Routine'surveillance testing, instrument calibration, or preventative maintenance which require system configurations as described in items 2.b(l) and 2.b(2) need not be reported except where test, results

.themselves reveal a degraded mode as de-scribed above.

(3) Observed inadequacies in the implementation of administrative or procedural controls which threaten to cause reduction of degree of re-dundancy provided in reactor protection systems or engineered safety feature systems.

(4) Abnormal degr'adation of systems other than those specified in items 2.a(3) above designed to contain radioactive material resulting from the fission process.

Note: Sealed sources or calibration sources are not included under this item. Leakage of packing or gaskets within the limits'alve for identified leakage set, forth in technical specifications need not be reported under this item.

(5) Measured levels of radioactivity in an environ-mental sampling medium determined to exceed the reporting level values of Table 6.9-2 when averaged over any calendar quarter sampling period. When more than one of the radionuclides 6.9-7

in Table 6.9-2 are'etected in the sampling medium, this report shall be submitted if:

concentration (1 + concentration 2 + ....) 1.0 lxmxt eve 1 xmas.t evel 2 When radionuclides other than those in Table 6.9-2 are detected and are the result of plant effluents, this report shall be submitted if the potential annual dose to an individual is equal to or greater than the calendar year limit of Specifications 3.9.1.2.a or 3.9.2.2.a. This re-port. is not required if the measured level of radioactivity was not the result of plant efflu-ents; however, in such an event, the condition shall be reported and described in the Annual Radiological Environmental Monitoring Report.

6.9.3 Uni ue Re ortin Re uirements 6.9.3.1 Annually: Results of required leak tests performed on sources if the tests reveal the presence of 0.005 micro-curie or more of removable contamination.

6.9.3.2 Annually: A tabulation on an annual basis of the number of station, utility and other personnel (including con-tractors) receiving exposures greater than 100 mrem/yr and their associated man rem exposure according to work and job functions, e.g., reactor operations and sur-veillance, in-service inspection, routine maintenance, special maintenance (describe maintenance), waste pro-cessing, and refueling. The dose assignment to various duty functions may be estimates based on pocket dosi-6.9-8

4 I

TABLE 6.9-2 REPORTING LEVELS FOR RADIOACTIVITY CONCENTRATIONS IN ENVIRONMENTAL SANPLES Reporting Levels Broad Leaf Airborne Particu)ate Fish Nilk Vegetables Analysis Water (pCi/1) or Gases (pCi/m ) (pCi/Kg, wet) (pCi/1) (pCi/Kg, wet)

H-3 3x10 bIn-54 1000 3x10 Fe-59 400 1 x 10 Co-58 1000 3x10 Co-60 300 1 x 10 Zr-Nb-95 400 I-131 0.9 1 x 10 Cs-134 30 '10 1 x 10 60 1 x 10 Cs-137 50 20 2x10 70 2x10 Ba-La-140 200 300 (a) Total for parent. and daughter

~h ~

I

meter, TLD, or film badge measurements. Small exposures totalling less than 20% of the individual total dose need not be accounted for. In the aggregate, at least 80% of the total whole body dose received from external sources shall be assigned to specific major work functions.

(NOTE: This tabulation supplements the reguirements of Section 20.407 of 10 CFR Part; 20.)

6.9-10

6.15 bIa'or Chan es to Radioactive Waste Treatment S stems (Iiguid and Gaseous)

FUNCTION 6.15.1 The radioactive waste treatment systems (liguid and gaseous) are those systems defined in Technical Speci-fication 5.5.

6.15.2 Major changes to the radioactive waste systems (liquid and gaseous) shall be reported by the following method.

For the purpose of this specification, 'major changes's defined in Specification 6.16.3 below.

6.15.2.1 The Commission shall be informed of all major changes by the inclusion of a suitable discussion or by reference to a suitable discussion of each change in the Semiannual Radioactive Effluent Release Report for the period in which the changes were made. The discussion of each change shall contain:

a) a summary of the evaluation that led to the deter-mination that the change could be made (in accord-ance with 10 CFR 50.59):

b) sufficient detailed information to support the reason for the change; c) a detailed description of the equipment, components and processes involved and, the interfaces with other plant systems; 6.15-1

4 Attachment B The proposed Technical Specifications for radiological th b 7 7, 1, ~d~' ~ '~

effluents have been developed based upon NRC guidance provided in Effluent Technical S ecifications for PWRs. The NRC gul.dance has een adapted to a format su>.table or inclusion in the Ginna Technical Specifications and changes have been made,to account for the Ginna facility design. The proposal includes requirements to ensure compliance with 10 CFR Part 20, Appendix I to 10 CFR Part 50 and 40 CFR 190.

Effluent monitors are provided to aid in ensuring that the limits of 10 CFR Part 20 are met. The allowance for inoperability is generally consistent with the NRC guidance and requires that sampling of effluents be performed in case a monitor is required but inoperable. Instead of shutting down the plant if the oxygen monitor is inoperable, samples will be taken at short intervals.

This is preferred since a plant shutdown would result. in a sig-nificant amount of waste gas which would have to be handled during a time at which it may be desirable to minimize gas handling.

4 Limiting 0onditions for operation to implement, 10 CFR Parts 20 and 50 have been developed following NRC guidance. For un-planned gaseous releases, a 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> averaging is permitted in determining compliance with 10 CFR Part 20. This is acceptable based on the definitions within Part 20 and based upon effluent surveillance instrumentation analysis schedules. Radwaste treat-ment equipment will be operated, as appropriate, to limit potential doses due to plant effluents. Portions or all of the radwaste treatment systems are required to be operated should the projected doses otherwise exceed preestablished values.

No limits have been proposed for contents of the gas decay tanks. This due to the fact that any credible quantity of waste gas in any single tank will be well below the quantity which would have to be released to yield a site boundary dose of 0.5 Rem, even with accident, meteorology. Specifically, FSAR Section 14.2.3 reports a reactor coolant system inventory of equivalent xenon assuming no release over a full core cycle and one percent failed fuel as 46,000 Curies. Using the equations presented in

. NUREG-0133, one finds that a release of approximately 100,000 Curies is necessary to yield a site boundary dose of 0.5 Rem.

This assumes that accident meteorology is used instead of annual average meteorology, which seems more appropriate and would provide even greater margins.

An environmental monitoring program is reestablished based on NRC guidance. Samples are collected and analyzed at intervals throughout the year with sampling being conducted at a reduced level during the winter. This reduction is acceptable based on the fact that food pathways are either absent or of reduced con-sequences in the winter.

gO

,(

Radiation monitoring instrumentation used for effluent.

surveillance has been removed from Table 4.1-1 and placed in Table 4.1-3. In Table 4.1-1, the emergency plan instruments will be calibrated annually instead of at refueling intervals. This will allow calibration to be performed at times other than the refueling outage..

In Table 4.1-3, channel calibration is to be performed annually instead of at, refueling intervals. This is to avoid the necessity to calibrate during refueling outages. If the NRC intends the interval "R" to imply every 18 months independent. of the refueling outage, we request that. that be the calibration interval listed as refueling.

Environmental surveillance requirements are consistent with NRC guidance.

Effluent surveillance is presented in Section 4.12. Batch releases are sampled as shown in Table 4.12-1. Since compliance with 10 CFR Part 20 may be shown through a gross beta analysis, this is permitted.

A composite sample analyzed for principal gamma emitters and I-131 will provide the information required for dose calculations.

For the purposes of this Specification, release of the neutraliz-ing tank to the retention tank is considered a batch release. No additional sampling is required of the retention tank since its major input is the neutralizing tank. (Small sources, in terms of radioactivity, include floor drains in non contaminated areas.)

The retention tank discharge is activated on high level in the tank and is through a radiation monitor.

Waste treatment systems considered in the evaluation which was performed pursuant. to Appendix I are listed in Section 5.5.

Under audits, the change in the insurance brokerage firm from NELPIA to ANI is reflected. This is purely an administra-tive change.

The Offsite Dose Calculation Nanual is presently in draft form. Revisions to the draft, are being considered based upon revised guidance provided by the NRC letter dated January 18, 1979, which was received February 2, 1979.

Specifications for solid radwaste have not been proposed since they are unrelated to Appendix I or to Part. 20. In addi-tion, they appear to be based on Standards which are still in draft form. Also, although solid wastes generated by Ginna Station comply with 'current regulations, they do not, meet the Specifications suggested by the NRC. Finally, an industry task force is being established under the auspices of AIF to develop requirements appropriate for currently operating plants and equipment and consistent, with the regulations. Pending the outcome of the study, Specifications.

it does not seem appropriate to propose

1

Introduction'n a May 28, 1974 letter from Mr. Robert A. Pury c-,

the United States Atomic Energy Commission asked several questions on the R. E. Ginna Quality Assurance Program for Station Operation. The information requested/and further clarification of the program are provided in Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License y Supplement IV is a revised description .,of the R. E. Ginna Quality Assurance Program for Station Operation and supersedes Supplement II in its entirety. The follows.ng revisions have been made to the description of the program:

Section IV.2 Additions That all {}uality Assurance, Quality .Control, Eng'n-for eering, and Purchasing procedures are reviewed adequacy at least once every/two years.

That the list of structures, systems, and components covered by the quality ad'surance program are based on the list in Section 1. .1 of the FSAR.

That management review of the quality assurance program may be in a form otHer than 'an audit.

That the Nuclear>Safety Audit and Review Board is required to review the status and adequacy of the quality assuram(ce program at least once every two years.

s That the CQ irman of the Nuclear Safety Audit and, Review Board reports to the Chairman of the Board of Rochester Gas and Electric Corporation on NSARB activities.

Section V.3 Addj~tions That spare or replacement parts meet, at least, the requirements of the original design.

IV-i Revision 1 August 1974

1 0, 1

That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.

That design deficiencies are documented and controlled in accordance with Section IV.16.

That design documents are collected,'tored, and main-tained in accordance with Section II.17 and a listing of which design documents are maintained.

Clarification Clarified which design documents are reviewed by Quality Assurance.

Section IV.4 Additions That procurement documents for spare or replacement parts are processed in the same manner as other procurement documents.

That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.

That the documents are available for verification in Purchasing and plant records.

That Quality Control reviews procurement documents for spare and replacement parts for similarity to the original requirements, and adequacy of quality require-ments.

Section IV.5 Clarification Clarifies which documents are reviewed by Quality Assurance.

Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.

IV-ii Revision 1 August 1974

t P 4

That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.

Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.

Added Quality Control responsibilities for sur-veillance and inspection of special process activi-'ies.

Section IV.10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of, the activity.

That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification of the organization responsible for performing the inspection, the acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.

That inspection equipment is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.

Section IV.ll Addition That test procedures include test methods and test instrumentation definition.

IV-iii Revision 1 August 1974

j llf f

II

Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.

Section IV.14 Addition That written procedures control the use of hold tags, test tags and labels and that the procedures require the recording of the name. of the person placing and removing the tag.

Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.

Section IV.17 Additions That plant records include operating logs, drawings, specifications, calibration procedures and reports, nonconformance reports, and the results of inspec-tions, tests, audits and the monitoring of plant activities and material analyses.

That quality assurance records of special process activities are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.

That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.

IV-iv Revision 1 August 1974

t f

(

1

'O t,

1 ll 0

Section IV.18 Addition That Quality Assurance is responsible for conducting the audits listed in Table IV.18-1.

In July 1974, the United States Atomic Energy Commission requested information on the conformance of the R. E. Ginna Quality Assurance Program for. Station Operation to the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book Revision 0). The infor-,

mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. The following changes have been made to Supplement IV:

Section IV.1 Additions A description of the extent to which the quality assurance program conforms to the document entitled "Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants",

Revision 0 dated October 1973 (Orange Book Revision 0).

On October 1, 1974, Rochester Gas and Electric Cor-poration revised its corporate structure. This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program. In addition, the RG&E commitment to the "Orange Book" in August has necessitated some shifting of responsibilities. The changes RG&E has made are reflected in Revision 2 to Supplement IV to the Technical Supplement accompanying Application for a Full Term Operating License.

The changes affect every section of the supplement except sections 12 & 14. Change pages are listed in Instructions 2 and each revised page is marked with revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next to each vertical line.

IV-v Revision 2 November 1, 1974

0 11 y II F

'I C

I 0

Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii. Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement II and Supplement IV. Some editorial corrections have been made, and these are also marked.

Effective February 1, 1976, three additional organizations in the Rochester Gas and Electric Corporation have been assigned responsi-bilities for control of quality related activities. The changes are reflected in Revision 3 to Supplement IV to the Technical Supplement Accompanying Application for a Full Term Operating License. Revision 3 also reflects some reclarification of terms and responsibilities which do not lesson our program commitments.

Reclarification changes are concentrated in sections IV-3, IV-4, IV-5, IV-6 and IV-15. Change pages are listed in Instructions-3,

.3 and each revised page is marked with revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level -is noted by an arabic numeral next to each vertical line.

Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii. Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement XI and Supplement IV.

During July, 1978, Rochester Gas and Electric Corporation revised its corporate structure. This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program.

Revision 4 also reflects some reclarification of terms and respon-sibilities which do not lessen Rochester Gas and Electric Cor-poration program commitments. Reclarification changes are concentrated in sections XV-1, IV-2, IV-3, XV-7, XV-10 and IV-15.

Change pages are listed in Instructions-4 and each revised page is marked with revision level. Since single spacing of each page has reduced the number of pages, each page beginning with IV-1 is numbered consecutively resulting in the Revision 4 notation at the bottom for that page" containing different information than the corresponding page number of previous revisions.

Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii.

4/ IV-vA Revision 4 December 1978

~ ~

In a February 8, 1979 letter from Mr. Dennis L. Ziemann, the Nuclear Regulatory Commission requested additional information associated with their review of Revision 4. Revision 5 provides the additional information and better clarification of the program consistent with that which was forwarded in Rochester Gas and Electric letter dated March 9, 1979. Change pages are listed in Instructions 5, and each revised page is marked with a revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next to each vertical line. Tables which have been re-vised are shown by revision level at the bottom of the page.

In a June 5, 1979 letter from Mr. Dennis L. Ziemann, the Nuclear Regulatory Commission requested additional information associated with their review of Revision 5. Revision 6 provides the additional information consistent with that which was forwarded in Rochester 6 Gas and Electric letter dated June 25, 1979. Change pages are listed in Instruction 6, and each revised page is marked with a revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The re-vision level is noted by arabic numeral next to each vertical line.

Revision 7 was prepared to indicate recent organization changes in the corporate structure, Quality Assurance and General Maintenance.

Change pages are listed in Instructions 7, and each revised page o vl is marked with a revision level. In addition, the latest revision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next to each vertical line.

Revision 7 November 1980 IV-vB

TABLE OF CONTENTS Section Title Pa<ac QUALITY ASSURANCE PROGRAM FOR STATION OPERATION IV. 1 Quality Assurance Program IV-1 IV. 2 Organization IV-4 IV. 3 Design Control IV-8 IV.4 Procurement Document Control IV-10 IV.5 Instructions, Procedures and Drawings XV-lla IV.6 Document Control IV-13 IV.7 Control of Purchased Material, Equipment IV-15 and Services IV.8 Identification and Control of Materials, IV-17 Parts and Components XV. 9 Control of Special Processes IV-18 IV. 10 Inspection IV-19 IV. 11 Test Control IV-20 IV. 12 Control of Measuring an/ Test Equipment XV-21 IV.13 Handling, Storage and Shipping IV-22 XV. 14 Inspection, Test and Operating Status IV-23 IV. 15 Nonconforming Materials,,Parts and IV-24 Components XV. 16 Corrective Action XV-25 f

IV. 17 Qua'lity Assurance Records IV-26 IV. 18 Audits IV-28 IV-vi Revision'5 April 1979

I C

h l

LIST OF TABLES Table Number Title Pa<ac IV. 1-1 Quality Assurance Program IV-30*

Procedures Subject Listing IV. 4-1 Procurement Document Requirements IV-40*

IV. 18-1 Audit List IV-41*

LIST OF FIGURES Fi ure Number Title Pacae IV. 2-1 Management Organization IV-43*

IV. 2-2 Deleted IV-44*

IV. 2-3 Ginna Station Organization IV-45*

IV.2-4 General Maintenance Organization IV-46*

IV. 2-5 Engineering Department Organization IV-47*

3 IV. 2-6 Review and Audit Functions IV-48 *

  • All tables and figures except Figure IV.2-5 have been revised in Revision 3.

Revision 7 November 1980 IV-vii

QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Cor-poration to assure safe and reliable operation of the R. E. Ginna Nuclear Power Plant. This program applies to all activities affecting the safety related functions of. the structures, systems, and components that prevent or mitigate the consequences of postulated accidents that could cause undue risk to the health and safety of the public. ,These quality affecting activities include operation, maintenance, repair, inservice inspection, refueling, modification, test and inspection. In addition, the quality assurance program applies to the activities associated with the packaging of licensed radioactive materials to be shipped in accordance with 10 CFR Part, 71.

The basic Rochester Gas and Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate Statement of Quality Assurance Policy. This policy is implemented by the Vice President, Electric and Steam Production, through the Manager, Quality Assurance, and the Ginna Station Superintendent.

The'rogram is governed by a Ginna Station Quality Assurance Manual whi'ch contains the requirements and assignment of responsibilities for implementation of the program. The manual is prepared, reviewed, and maintained by Quality Assurance and approved by the Vice President, Electric and Steam Production.

The program is implemented through Quality Assurance, Ginna Station, Engineering, General Maintenance, Electric Meter and Laboratory and Purchasing Procedures. These procedures are prepared and approved by the responsible organization and reviewed and concurred with by Quality Assurance. The p'rocedures are contained in separate manuals maintained by the responsible organization. All these procedures are reviewed for adequacy at least once every two years by the responsible organization. Table IV.l-l provides a listing of the subjects and a short description of the subject matter which is contained in the procedures.

Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual. Organizational responsibilities are described in Section IV.2.

The quality assurance program covers all existing Seismic Category I structures, systems, and components, including their foundations and supports. Activities. affecting the quality of these structures, systems, and components are IV-1 Revision 4 December 1978

II controlled to an extent consistent'ith their importance to safety. A detailed lists.ng of the structures, systems, and components covered by the quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assur-ance Manual.

Details of the system boundaries and the quality classi-fication of water-and-steam-containing components are con-tained on system flow drawings. The listing of structures, systems, and components -covered by the quality assurance program and the system flow drawings are prepared and main-tained by Engineering and reviewed and concurred with by Quality Assurance. r Modifications or additions to existing, structures, systems, and components are designated the same seismic classifica-tion as the existing system. New structures, systems, and components are designated a seismic classification in accordance with the 'guidelines in USNRC Regulatory Guide 1.29.

Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced. Personnel responsible for performing activities affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures. Refresher sessions are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure. Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality. Quality Assurance assists in establishing training requirements and assures that personnel are trained by auditing training records.

1n addition to training in quality assurance, each depart-ment conducts on-the-job training to the extent necessary'to assure that personnel are qualified for their primary work assignments.

The Ginna Station Superintendent is responsible for the formal training, qualification, licensing, and requali-fication of operators, as necessary. Wlhere necessary, personnel are trained in radiation protection, plant safety and security.

The Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that meaningful and is effectively complying with corporate it is policy and 10CFR50, Appendix B. This review consists of audits or a review equivalent to an audit performed, by IV-2 Revision 4 December 1978

~~ ~

company personnel or outside organizations. Reviews will be conducted every six months during the first two years that the program is implemented.

The quality assurance program is designed to meet the require-ments of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants." The program conforms to the following NRC Regula-tory Guides and ANSI Standards:

a. NRC Regulatory Guide 1.8, Revision 1, "Personnel Selec-tion and Training."
b. NRC Regulatory Guide 1.28, Revision 2, "Quality Assur-ance Program Requirements (Design and Construction)."
c. AEC Regulatory Guide 1.30, Revision 0, "Quality Assurance Requirements for the Installation, Inspection, and Testing of Instrumentation and Electric Equipment."
d. AEC Regulatory Guide 1.33, Revision 0, "Quality Assurance Program Requirements (Operation)," and regulatory staff comments and supplementary guidance contained in the docu-ment entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants,"

Revision 0 dated October 1973 (Orange Book Revision 0)

e. AEC Regulatory Guide 1.37, Revision 0, "Quality Assurance Requirements for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants."
f. AEC Regulatory Guide 1.38, Revision 2, "Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants."
g. AEC Regulatory Guide 1.39, Revision 2, "Housekeeping Requirements for Water-Cooled Nuclear Power Plants."
h. AEC Regulatory Guide 1.58, Revision 0, "Qualification of Nuclear Power Plant Inspection, Examination and Testing Personnel."
i. AEC Regulatory Guide 1.64, Revision 1, "Quality Assurance Requirements for the Design of Nuclear Power Plants."

Revision 6 July 1979

p

j. AEC Regulatory Guide 1. 74, Revision 0, "Quality Assurance Terms and Definitions."
k. AEC Regulatory Guide 1.88, Revision 2, "Collections, Stor-age and Maintenance of Nuclear Power Plant Records."

Note: Nhen record storage facilities are not designed in accordance with the requirements of Regulatory Guide 1.88, duplicate records are kept in two separate stroage locations in separate buildings which are physically isolated from each other.

1

1. NRC Regulatory Guide 1.116, Revision O-R, "Quality Assur-ance Requirements for Installation, Inspection, and Testing of Mechanical Equipment and Systems."
m. NRC Regulatory Guide 1.123, Revision 1, "Quality Assurance 41 Requirements for Control of Procurement of Items and Ser-vices for Nuclear Power Plants."
n. ANSI N45.2.12, D3, R4, 2/74 "Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants."

The major organizations participating in the quality assur-ance program are the Purchasing, Engineering, Ginna Station, General Maintenance, Electric Meter and Laboratory Department; Quality Assurance and Quality Control Groups; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board. Fj.gure IV.2-1 is an organizational chart showing these organizations and their relationship to the corporate organization.

Positions responsible for the principal elements of the quality assurance program are:

Chairman of the Board Vice President, Electric and Steam Production Vice President and Chief Engineer Manager, Quality Assurance Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer Superintendent, Electric Meter and Laboratory Superintendent, General Maintenance General Maintenance Quality Control Coordinator Director, Strategic and Fuel Planning 7'I Supervisor, Materials Engineering Revision 7 November 1980

In addition to the above individuals, two advisory groups are utilized to review and aud'it plant operations. These groups are the Plant Operations Review Committee and the Nuclear Safety Audit and Review Board. The Plant Operations Review Committee acts in hn advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and 2'I Review Board advises the .Vice President, Electric and Steam Production. The qualifications of members and the respon-sibilities of these organizations are described in Appendix A to Provisional Operating Licensed No. DPR-18, Section 6.0; Technical Specifications.

The Chairman of the Board of the Rochester Gas and Electric Corporation directed the establishment of the quality assur-ance program and issued the governing policy statement. He has established the Nuclear Safety Audit and Review Board to review and audit plant operations. The Chairman of the Nuclear Safety Audit and Review Board is responsible to the Executive Vice President on all activities of the Nuclear Safety Audit and Review Board.

The Vice President, Electric and Steam Production has cor-porate responsibility for operation of Ginna Station in accordance with applicable regulatory requirements. He is responsible for establishing the policies and requirements necessary to assure safe and reliable operations of Ginna Station. He is also responsible for those items delineated in Section 6.0, Technical Specifications. He has overall responsibility for and authority to direct quality affecting activities. He has assigned the responsibility for the detailed development and overall coordination of the quality assurance program to the Manager, Quality Assurance.

The responsibility for proper implementation of the quality assurance program requirements at Ginna Station has been assigned to the Ginna Stat'ion Superintendent.

The Vice President and Chief Engineer has corporate responsi-bility for the design and construction of nuclear power plants and related major modifications. In this capacity, the Vice President and Chief Engineer is responsible for directing and supervising the Engineering Department as shown in Figure IV.2-5.

The Vice President and Chief Engineer has the responsibility for preparing drawings and specifications for the procurement of materials and components for plant maintenance and modifi-cation as required. He is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna 4l Station Superintendent and for reviewing unique maintenance and repair procedures for major equipment.

3 The Manager, Quality Assurance, is responsible for estab-

)

lishing and executing the overall quality assurance program.

2:) He is responsible for assuring that the program satisfies Revision 7 .

November 198 0

the requirements of 10CFR50, Appendix B, and for keeping the total program updated. He is responsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and reliably are establish'ed and followed. He provides management with objective information concerning quality, independent of the individual or group directly responsible for performing the specific activity. He has the authority and organizational freedom to assure all necessary quality affecting activities are performed. He is responsible for maintaining a quality assurance staff, Figure IV.2-1, for the conduct of staff training, for directing its activities and for establishing and implementing a comprehensive audit program.

The Manager, Quality Assurance is a graduate engineer with at. least six years of responsible experience, of which two years i:s in quality assurance and three years in the design or operation of nuclear or fossil fuel power plants.

0 The Manager, Quality Assurance and the Quality Assurance Staff are responsible for supervising both the on-site and off-site Quality Assurance program. This includes writing Quality Assurance policies and procedures, and reviewing the procedures of the organizations participating in the Quality Assurance program. They are also responsible for auditing all aspects of the Quality Assurance Program and for ensuring significant conditions adverse to quality are corrected. They are responsible for assuxing that proper codes, standards, and quality requirements are specified in design, procurement, and installation documents. They are responsible for assuring that the suppliers of safety-related material, equipmeng and services are properly qualified, and they are responsible for conducting audits and surveillances at these, supplier.'s facilities. In ad-

'ition, the staff assists the Manager, Quality Assurance, in the preparation of the audit schedule, audit status reports, corrective action report summaries and in the preparation and maintenance of the Quality Assurance Procedures Manual.

Revision 7 November 1980 IV-6 >I

The Purchasing Agent is responsible for the procurement of materials, services, and components, from qualified suppliers, in accordance with applicable commercial, technical, and quality requirements. He maintains a listing of qualified suppliers determined through an evaluation made by Purchasing, Engineering, Quality Assurance and the other involved depart-ments as appropriate.

The Ginna Station Superintendent is responsible to the Superintendent, Nuclear Production for safe operation of Ginna Station. He is responsible for the performance of the Ginna Station operation, maintenance, repair, refueling, inservice inspection, modification, test and inspection quality affecting activities in accordance with the require-ments of the quality assurance program. He is responsible for providing qualified personnel to perform these activi-ties in accordance with approved drawings, specifications, and procedures. He is also responsible for those items delineated in Section 6.0, Technical Specifications.

The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging his respon-sibilities. He is responsible for the day-to-day operation of the station and implementing the policies," procedures, and directions of the Ginna Station Superintendent.

The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for supervising the station Quality Control Organization, which is responsible for assuring that activities affecting quality are prescribed and carried out in accordance with approved drawings, specifications, and procedures. In his day-to-day acti-vities, the Quality Control Engineer reports to the Ginna Station Assistant Superintendent and is a member of the Plant Operations Review Committee. He also reviews pro-curement documents initiated at the station. He is responsible for the coordination of inspection activities 4 and for assuring that inspection requirements are included in approved procedures. He is also responsible for the receipt inspection of incoming materials, parts, and com-ponents and the processing of nonconformance reports. He coordinates the processing of corrective action reports, and assures that corrective action is taken. He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superin-tendent with objective information concerning the quality of

'hese activities.

The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which reviews documents and which performs inspection and surveillance activities. Additional inspectors are assigned to this group as required by the level of work activities.

Revision 4 December l978

In addition to the Ginna Station Quality Control Engineer, the Ginna Station, Superintendent is assisted by other desig-nated staff members, Figure IV.2-3, in the implementation of certain quality assurance program requirements at the plant.

These staff members are assigned responsibility for testing, storage of material and equipment, operating and test, status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling and modification.

The Director, Strategic and Fuel Planning is responsible for coordinating all activities related to the procurement of nuclear fuel. These duties include the coordination, pre-paration and execution of the contracts and their supporting documents used to control the procurement. Fuel Planning also coordinates bid evaluation and recommends selection of the successful bidder.

The Superintendent, General Maintenance, is responsible for supervising and directing a staff, Figure IV.2-4, which supervises the performance and verification of safety related maintenance, repair and modification activities performed at the General Maintenance facility. He is also responsible for the routine maintenance of material handling equipment, control of special processes and establishment of the inservice inspection program.

The General Maintenance Quality Control Coordinator is responsible to the Superintendent, General Maintenance, for performing or directing the performance of verification activities for which General Maintenance Quality Control is responsible. In this capacity he is responsible for assuring that activities, affecting, quality, are carried out in accordance with approved drawings, specifications and proce-dures. He is also responsible, for the preparation of Quality Maintenance procedures and for the training of General Maintenance personnel in the implementation of these procedures.

He also reviews procurement documents initiated by General Maintenance, coordinates receipt inspection of incoming materials, parts and components, performs routine surveillance of General Maintenance activities and coordinates the process-ing of nonconformance reports., corrective action reports and the replies to audit reports.

The Supervisor, Materials Engineering is responsible to the Superintendent, General Maintenance for the development and qualification of procedures utilized for special processes.

Revision 7 November 1980

0 He is also responsible for, assuring that personnel are trained and qualified for activities involving nondestructive exami-nation and for providing functional guidance and direction in those methods for which he is a qualified Level III. He is also responsible for establishing'he inservice inspection program.

The Superintendent, Electric Meter and Laboratory is responsible for providing routine maintenance and testing services for Ginna Station safety related protective relays as requested.

IV.3 Desi n Control Design activities are performed by Rochester Gas and Electric Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.

Revision 7 November 1980 IV-8 a

E ngineering is responsible for the design and control of design activities (including design interfaces) for major modifications of structures, systems or components.

4I Ginna Station is responsible for the design and control of design activities for minor modifications of structures, sys-Ginna Station is also responsible for 4

tems, or components.

classifying station originated modifications as either Major or Minor. Engineering reviews and concurs with modifications being classified as Minor. Minor modifications typically involve (1) component changes which involve vendor design and to the extent that the change does not impact existing 'imited performance requirements. (2) Additions within Seismic Category I buildings which perform no safety functions and which either interface with Seismic Category I items or whose failure could reduce the functioning of any safety related component required for safe shutdown of the plant to an unacceptable level. (3)

Changes to a safety related system determined not to be major (i.e.vents, drains, alarms, indicating lights, etc.).

Design control is implemented by means of procedures which include: design considerations, design review requirements; internal and external interface control considerations; design document review, approval, distribution, control, and revision requirements; and corrective action. Design con-siderations include, as appropriate: physics, stress, materials, thermal, hydraulic, radiation and accident analysis;

( appropriate design bases, codes, standards and regulations; I acceptability for operation, maintenance and repair; acceptance

( and rejection criteria; quality standards and other quality

) assurance requirements. Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests as appropriate to assure the adequacy of the design.

The design of plant modifications is verified by an engineer other than the one who performed the original design. For Major modification design, this may be done by Engineering department design engineers or consulting engineers as re-quested. For Minor modification station design, this may be done by Ginna Station and or Engineering department design engineers as appropriate.

Spare or replacement parts must at least meet the original equipment technical and quality requirements. For plant modifications, standard "off-the-shelf" commercial or pre-viously approved materials, parts, and equipment are selected and reviewed for suitability of application by the design engineer.

Design changes, are normally reviewed and approved in accord-ance with the same procedures as the original design. Supple-mental procedures are established for the review and approval of field changes. In general, design changes including field changes, are reviewed and approved by the organizations or IV-9 Revision 5 April l979

V I'J I

I I

JV I

I',

J(

f- I

~

I P J I E

1 I I I, I I

I I

P' V

I II I 'V I V 'I il F

I V Vg I

individuals that performed the original design, review and approval. Where this is not practical, other responsible design organizations or individuals designated, provided they have access to pertinent background information and are com-petent in the specific design area.

Design verification and field change systems are methods utilized to detect, document and correct design process errors and deficiencies. In addition, the corrective action system, described in section IV.16, is utilized to control and docu-ment corrective action to preclude recurrence of those design 4 process errors and deficiencies which are considered to be a significant condition adverse to quality.

Qua 1 ity Assurance is responsib 1 e for assuring that des ign 3

control procedures, whether the work is done by Rochester Gas and Electric or by other organizations, are prepared and implemented and incorporate appropriate design control practices, checks, and reviews. Design control procedures are reviewed to assure that an independent verification is perf ormed.

Revision 5 April 1979 IV-9a

P P 1

0

~ ~

Engineering and Ginna Station are responsible for establishing

'easures for the proper control of design documents and re-5/ visions there-to, to assure that distribution is to responsible individuals and in a timely manner to prevent inadvertent use of superseded design information. The measures include the use of document. revision levels, document transmittals, release stamps, field change request forms and distribution lists.

Design documents are collected, stored, and maintained in accordance with Section IV.6 and IV.17, as appropriate.

Design documents include design criteria, analyses, speci-fications, drawings, design review records, and changes thereto.

Quality Assurance and Station Quality Control through pre-paration assistance and/or review assure the proper inclusion. of quality standards in the design of major and 4< J3 minor modifications, respectively. Quality Assurance is also responsible for assuring that adequate inspection requirements are included in specifications. The Manager, 5 Quality Assurance reviews and approves any deviations from quality standards when they occur.

Plant modifications are controlled by means of applicable 3 Ginna Station, Engineering -and Quality Assurance procedures.

These procedures provide for the preparation, review, and approval of design documents, safety analyses, and plant modification procedures. Proposed plant modifications are reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.

IV. 4 Procurement Document Control Procurement document control applies to the control of procurement documents for materials, parts, components, and services required to perform quality affecting activities.

Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, contracts, specifications; and drawings.

Procurement of materials, parts, components, and services is 3

-~initiated by department staff personnel. Procurement proce-

[

dures require that organizations preparing procurement documents consider and include, as appropriate, the items listed in Table IV.4-1.

Revision 6 July 1979

Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station and General Maintenance are reviewed by Quality Control and approved by the department superintendent or his designated representative.

Procurement documents initiated in Engineering and Quality Assurance are reviewed by Quality Assurance and approved by the Chief Engineer, or designees. Procurement documents for nuclear fuel are initiated by the fuel management staff, reviewed by Quality Assurance and approved by the Director, Strategic and Fuel Planning.

Procurement, documents initiated at Electric Meter and

~

Laboratory are reviewed by Quality Assurance and approved by the department superintendent or designated alternate.

Evidence of review and approval of procurement. documents is recorded on the documents or on the attached control form.

The attached control form identifies to Purchasing a procure-ment method which will ensure that the selected supplier is capable of providing the item or service in accordance with the requirements of the procurement documents. Considerations used in selecting a supplier and for determining the corres-ponding procurement method are described in Section IV.7 After purchase requistions, service agreements, contracts, specifications, and drawings have received the required re-views and approvals, a purchase order is issued by Purchasing to the selected supplier and controlled as described in Section IV.7. These documents are maintained by Purchasing, by the originating department, and/or by the receiving locations, as appropriate, until procurement is completed.

Under no circumstances are purchasing requirements altered (except for quantity or pricing) during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve the original documents as described above. Changes or revisions to procurement documents are subject to the same review and approval requirements as the original documents.

Originating department technical review of procurement documents includes verification of applicable regulatory, code and design requirements. Quality Assurance/ Quality Control review of the above includes checks to verify proper inclusion of quality standard, quality assurance program requirements, method or procurement and the applicable acceptance criteria. Quality Control also reviews procure-ment documents for spare or replacement paits for adequacy of quality requirements and to determine similarity, compati-bility, and the inclusion of the quality requirements and acceptance criteria of the original design.

Revision 5 IV-11 April 1979

t I

IV.5 Instructions Procedures and Drawin s Each Rochester Gas and Electric company organization is responsible for developing, reviewing, approving, and imple-menting procedures as required to implement the quality assurance program. These procedures cover activities such as document control, training of personnel, and responsibili-ties and duties of personnel. Quality Assurance reviews and concurs with th'ese procedures. Table IV.1-1 provides a summary'f the subject matter contained in the procedures which are used to implement the quality assurance program.

Procurement documents require suppliers and contractors to have appropriate instructions, procedures, specifications, and drawings.

Revision 5 April 1979 IV-11a I

!f 1 f f

CI N

1 I

P'$ k1 P f ll

Ginna Station is responsible for providing and implementing instructions and procedures associated with operation, maintenance, repair, in-service inspection, refueling, modification, testing and, inspection. This includes instructions and procedures listed in USAEC Regulatory Guide 1.33 for administrative control; general plant operation; startup, operation, and shutdown of safety related systems; correction of abnormal, offnormal, or alarm conditions, combat of emergencies and other significant events; radioactivity control; control of measuring and test equipment; chemical and radiochemical control; and fuel handling and refueling. Ginna Station is responsible for the preparation and implementation of quality control inspec-tion procedures utilized for detailed station inspection activities. Ginna Station is responsible for appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the completion of plant modifications. Ginna Station is also responsible for the preparation and issuance of those minor modification design documents not provided by Engineering or the equipment supplier.

General Maintenance is responsible for providing and for implementing instructions and procedures associated with special processes, the routine maintenance and inspection of cranes and handling equipment, as well as shop work required to support Ginna Station maintenance, repair and modification activities. General Maintenance is also responsible for the preparation and for the implementation of quality control inspection procedures utilized for detailed inspection activities at their facilities.

Electric Meter and Laboratory is responsible for the prepara-tion and implementation of relay inspection and testing procedures as required to direct detailed inspections and testing activities for which they are responsible. Electric Meter and Laboratory also'assists in the preparation of routine relay maintenance and testing procedures used by their personnel in the annual Ginna Station protective relay surveillance program.

Engineering is responsible for providing approved specifi-cations, and drawings associated with major modifications and when minor modifications necessitate drawings or specifi-cations. These documents require those performing the work to obtain, understand, and comply with appropriate procedures, specifications and drawings. Engineering has established procedures for revising drawings and specifications. These procedures cover updating of as-built drawings after plant "modifications and the revision, approval, distribution, and control of all drawings and specifications.

Revision 7 November 1980

Persons preparing and approving documents are responsible for assuring that specifications, instructions, procedures, and drawings include appropriate quantitative or qualitative acceptance criteria for determining that important activities have been satisfactorily accomplished and assuring that the documents are kept current.

indoctrination and training of personnel is provided by the responsible organizations to ensure that quality affecting activities are conducted in accordance with established documents. 1n addition, surveillance by Quality Control personnel, as described in Section XV.10 and audits by Quality Assurance as described in Section IV.18 are used to verify that quality affecting activities are being performed in accordance with approved instructions, procedures and drawings.

XV.6 Document Control Procedures are established to control the issuance of pro-cedures, instructions, drawings, and specifications. Standard document control requirements are contained in the Quality Assurance Manual. The Ginna Station Superintendent is responsible for the control of all documents issued at Ginna Station. General Maintenance and Electric Meter and Labora-tory are responsible for the control of documents issued by their respective organizations. Engineering controls all documents issued by Engineering, Quality Assurance and Purchasing. Each organization controlling documents has a separate procedure to control documents in accord-ance with the requirements of the Quality Assurance Manual.

The Quality Assurance Manual designates responsibilities and defines requirements for the preparation, review and approval of documents. Each department responsible for an activity is responsible for providing the necessary review and approval of instructions, procedures or drawings to assure that they are adequte, and include appropriate quali-tative and quantitative requirements. Departmental Quality Control representatives review departmental maintenance, repair, refueling and modification procedures, prior to use, to assure quality assurance requirements are included. The Plant Operations Review Committee has the responsibility for reviewing Ginna Station procedures prior to their approval as required by Section 6.0 Technical Specifications. Detailed inspection, test and examination procedures used by qualified personnel require the review and concurrence of the responsible technical person associated with that activity. Ginna Station, General Maintenance, Engineering, Purchasing, and Electric Meter and Laboratory quality assurance implementing procedures require the review and concurrence of Quality Assurance and the approval of the appropriate department supervisor.

Revision 4 December 1978

h lj

Quality Assurance .procedures are approved by the Manager, Quality Assurance.

The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of document involved, its importance to safety, and the intended use of the document. It specifies the types of documents which must be controlled; identifies the difference between con-trolled and uncontrolled copies of the same document; includes the method for identifying holders of controlled copies; requires that only controlled copies of a document be used for official purposes; requires that lists of effective revisions be issued periodically; requires lists of document holders to be maintained by the distributors; and requires that distributors transmit controlled documents using approved forms internally and externally.

Types of documents which are controlled include Technical Specifications, FSAR, Technical Supplements, Quality Assur-ance Manual, procedures (such as quality assurance, engineering, purchasing, repair, maintenance, test, cali-bration, fuel handling, modification, and administrative),

specifications and drawings. Suppliers of materials, equipment, and services are required in procurement documents to provide for control of documents, including manufacturing, inspection and testing instructions.

The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to assure that documents are available when required; to pro-perly review and approve documents such as procedures, instructions, specifications, and drawings; to provide the same reviews and approvals for changes to documents as was required of the original document; to require that organiza-tions which review and approve documents have access to pertinent information and adequate knowledge of the original document intent; to assure that approved changes are promptly transmitted for incorporation into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.

Quality Assurance and the Quality Control organizations, in the responsible departments, are responsible for review and concurrence of procurement documents and, therefore, procure-ment document control requirements.

Quality Assurance and the Quality Control organizations are further responsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.

Revision 4 December 1978

Ih Ip

Control of Purchased Material E ui ment and Services Procurement documents, supplier selection, planning for item or service acceptance control of supplier performance and acceptance of items and services are five major means used in controlling purchased material, equipment and services.

All procurement is conducted in accordance with procurement documents as stated in Section IV-4. All reviews, inspec-tions, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier is capable of providing acceptable, quality products.

Procurement planning is utilized by the procuring organiza-tions for determining the methods to be used for acceptance of the item or service as well as requirements for the control of the supplier performance. Source inspection (surveillance) certificate of conformance, receipt inspection and post instal-lation test are methods which are considered for item acceptance with receipt inspection utilized in the acceptance of all items.

In lieu of these methods, acceptance of services is based on either or a combination of: (1) surveillance of the activity and (2) review of objective evidence for conformance to the procurement document requirements (i.e. certifications, stress reports etc.). The extent of the acceptance methods and as-sociated verification activities will vary and be a function of the relative importance and complexity of the purchased item or service and the suppliers past performance.

Consideration for the control of supplier performance includes 5 the necessity for document submittals or surveillance, and under what situation the supplier is to report nonconformances.

Results of the planning are incorporated in the procurement documents and or on the attached procurement control form as described in Section IV.4.

Selection of a supplier is based on the evaluation of its capability to provide the item or services in accordance with the requirements of the procurement documents. The evaluation which is accomplished during the procurement planning, deter-:

mines the necessity for the'upplier selection to be from the approved suppliers list maintained by Purchasing. Purchasing utilizes the approved suppliers list for the selection source of those suppliers required to have a satisfactory quality assurance program. The evaluation guidelines for source se-lection considers the item complexity, method(s) of acceptance and for a replacement item, if the source is to be restricted to the original supplier. For engineered and off-the-shelf items, procured from suppliers required to have a quality assurance program and for which item acceptance is based other than on receipt inspection, supplier selection is from the approved suppliers list or one who is in the process of being added to the list, after having had its capability evaluated Revision 5 si April 1979

t!

t

to purchaser satisfaction. Other off-the-shelf items, that are manufactured to industry standards, that are typically utilized in applications other than nuclear, and for which item acceptance is based exclusively on receipt inspection may be purchased from sources other than the approved suppliers list. These other sources may include the manufacturer of the replacement part, authorized distributor for the manufacturer's replacement parts and distributor of catalog items which satisfy the guidelines of not requiring status on the approved suppliers list. Departmental procedures establish guidelines for source selection evaluations and for documenting the results on the procurement control form through, indication of the corresponding procurement method. The purchase requisition will also identify the source when replacement parts are to be procured from the original equipment supplier.

Addition of a supplier to the approved suppliers list is based on satisfactory evaluation of the supplier's capability by Quality Assurance, Purchasing and other departments, as appropriate.

For Engineered items, Engineering is responsible for evalu-4I ating 'the overall d'esign or manufacturing capability of the supplier including his particular technical ability to produce the design, service, item, or component delineated in the procurement documents. As part of this review, the supplier's design capabilities, machinery capabilities, handling capabilities, testing facilities, service capabili-ties, and experience are reviewed.

Quality Assurance is responsible for, evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric requirements.

The review includes consideration of: company organization, quality assurance personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices, accept-ance criteria, 'required quality assurance records and their retention, and quality assurance, requirements and controls imposed by the supplier on his subcontractors. Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assur-ance requirements.

4( Ginna Station, General Maintenance, Quality Assurance and Electric Meter and Laboratory evaluate the suppliers of inspection, test, and calibration services which they intend S n/ to use.

The departments responsible for performing supplier evalu-ations shall document -their results in reports which discuss areas investigated, findings, and conclusions. As applicable, concurrence of Purchasing, Engineering, Quality Assurance, I

Revision 5 IV-15a April 1979

C' 7

0

)' ~

LI

I Ginna Station, General Maintenance, Electric Meter and 4I Laboratory and Fuel Planning is required to place a supplier 3 on the qualified suppliers'ist. One organization can remove a supplier from the list without concurrence of the others.

Measures are established by Engineering and Quality Assurance to control supplier performance for engineered items. These measures typically include the processing of change infor-mation, surveillance of supplier activities and the control of documents exchanged with the supplier. In addition, each department procuring off-the-shelf items or services establishes similar measures for the control of supplier performance. With the exception of processing change information, the need for and applicable extent of purchaser controls of the supplier are determined during procurement planning.

Quality Assurance is responsible for determining and document-ing the degree of supplier surveillance (including review, inspection, or audit) required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance. The objective of supplier surveil-lance is to provide a sampling review of the supplier's quality assurance program implementation and of product conformance with respect to the purchase order requirements.

For complex engineered items, Quality Assurance and Engi-neering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.

T he results of the surveillance trip are documented by means of inspection sheets or trip reports which are distributed 3 to the Manager, Quality Assurance, and the department which initiated the procurement. When a deviation from purchase order requirements is noted, the Quality Assurance represen-tative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work, if necessary.

4IGinna Station Quality Control is responsible for surveillance of site contractors to assure that they meet all technical and quality requirements. The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.

The verification methods for the acceptance of items and services. are specified on the attached procurement control form during procurement planning and the purchase requisition preparation.

Department superintendents are responsible for receiving and storing items pending their acceptance. Upon receipt, the IV-16 Revision 5 April 1979

F

'L r EE II r

ty F

)

fF i C f

I I ,'I

'F' F F

  • 1 1

I

'I E

E F

U

department stockkeeper logs the item, places a "hold" tag on the item, and notifies Quality Control that the item has arrived.

Quality Control is responsible for receipt inspection upon de 1 ivery of items and associated services for maintenance, 3

repair, modification, and refueling. This inspection in-cludes the use of written procedures or checklists to verify that the items and services conform to the procurement docu-ments (if this has not been performed by source inspections) and that, documentary evidence of conformance is available at the plant prior to installation or use. Documentary evidence sufficient to identify the codes, standards or specifications met by the purchased material, equipment, and services is retained. In the event a final source inspection for the

~

4 acceptance is conducted prior to receipt by RGGE, Quality

~

Control performs an inspection for shipping damage or lost parts and a document check to assure that the required docu-mentation has been reviewed and is complete. A receiving inspection checklist is completed for all items received to document the extent of the inspection performed, including the documents checked, and the inspection results.

If the item and documentation are adequate, Quality Control labels the item as "Accepted," files the documentation and receipt inspection results, and releases the item for storage or use. If the item is nonconforming or the documentation 4[pIis unsatisfactory, Quality Control initiates a nonconformance report which is controlled in accordance with Section IV.15.

n All items issued must bear an acceptance tag and have docu-mentation to support the acceptability of the item. In the event the traceability is lost or the documentation review is unsatisfactory, the item becomes nonconforming and may not be released for use.

IV. 8 Identification and Control of Materials Parts and The identification and control of materials, parts, and components is accomplished in accordance with written requirements and applies to material, parts, or components in any stage of fabrication, storage, or installation.

Identification and control requirements are established by either an existing, procedure or requirements documents which are prepared during the planning stages of a project. The identification and control requirements cover items such as:

traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports; specification of the degree of identification to preclude a degradation of the item's functional capability IV-17 Revision 5 April 1979

I

~ ~

I.

t I

I I' 1

I

~ 1~

II

~ g I,

or quality; and the proper identification of materials,

.parts, and components prior to release, for manufacturing, shipping, construction, and installation.

2(Engineering and Quality Assurance are responsible for assuring that drawings and specifications contain appropriate require-ments for the identification and control of materials, parts, or components, as appropriate. Suppliers are required to assure that all required documentation for an item is prop-erly identified and related to the item. Each item is re-quired to be physically identified, either by marking on the =

item or by tags. Physical identification by purchase order number is used to the maximum extent possible for Revision 5 IV-17a April 1979

~~

'4

))

r

~ '

f,

,h

relating an item at any time to applicable documentation.

Identification is either on the item or records traceable to the item. Where physical identification is impractical, physical separation, procedural control, or other appro-priate means are employed.

The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant. Procedures covering the identification and control of materials, parts, and components at the plant are approved by the Ginna Station Superintendent. The. superintendents of other departments which receive material which is to be stored away from the plant are responsible for establishing procedures, for identification and control and for maintaining identification and control of material, parts, or components, stored or used in their area of responsibility.

In the event that traceability is lost for a specific item, it is handled as nonconforming material and deviations and waivers are controlled and documented in accordance with Section IV.15.

IV. 9 Control of S ecial Processes Written procedures are established to control special pro-cesses, such as welding, heat treating, and nondestructive examination to assure compliance with applicable codes, standards, and design specifications. Qualification of personnel and procedures complies with the requirements of applicable codes and. standards. When special process qualifi-cation requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification requirements.

Initiators of procurement activities are responsible for 4 3 requiring suppliers, in procurement documents, to control special processes in accordance with the above requirements.

Quality Assurance and Quality Control personnel are respon-

"3 sible for reviewing procurement documents to ensure that requirements for control of special processes are included.

Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Materials Engineering.

7 3t Special process procedures submitted by suppliers and con-tractors are reviewed and concurred with by Materials Engi-neering.

The Ginna Station Maintenance Engineer and Quality Control Engineer are responsible for assuring that personnel per-forming special processes under their cognizance are quali-fied and are using qualified procedures in accordance with Revision 7 November 1980 IV-18

applicable codes, specifications, and standards. The Supervisor, Materials Engineering is responsible for the qualification of NDE personnel and procedures. The Super-visor, Materials Engineering is responsible for the qualifi-cation of welding procedures and the training and qualifi-cation of welders. Engineering maintains records for personnel and procedures to demonstrate that required qualifications have been obtained and are kept current.

Quality Assurance and Quality Control perform surveillance inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.

Procedures prepared for the control of activities include inspection requirements and hold points as required by drawings, instructions, requirements documents, specifications, codes, standards, or regulatory requirements. For clarification and to distinguish from preventative maintenance inspections the following controls are associated with the quality assurance function inspections and referred to as verification inspec-tions. Instructions for conducting detailed verification inspections are contained in inspection procedures. These inspection procedures and all supporting specifications and drawings are provided to inspection personnel for use prior to performing the inspection. Inspection requirements and hold points are utilized to verify conformance of activities to the documented instructions, specifications, and drawings for accomplishing the activity. Inspection procedures in-clude the identification of quality characteristics to be inspected, a description of the method of inspection to be used, the identification of the group responsible for per-forming the inspection, thy acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity. Verification inspections are performed by qualified inspection personnel who are independent of the personnel performing the work.

Outside contractors are required by procurement documents to have and follow similar procedures and to use independent inspectors. Inspectors are sufficiently trained to adequately evaluate the activity they are inspecting.

Quality Control personnel are responsible for performing veri-41 fication inspections, as required, during plant operation, maintenance, repair, in-service inspection, refueling, modi-fication, and testing when the work is performed by Rochester Gas and Electric personnel. When the work is performed by outside contractors, Quality Control is responsible for sur-veillance of the subcontractor's inspection activities. All inspection equipment is calibrated and controlled in accordance with Section IV.12. Calibration status is verified by inspection personnel prior to performing an inspection operation.

Revision 7 1980

-'ovember

0 In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing methods, equipment, and personnel is provided.

Both inspection and process monitoring are required when control is inadequate without both.

5(4~ 3I2[ Quality Assurance is responsible for the adequate inclusion of 7 )

inspection requirements in specif ications.

The Ginna Station Quality Control Engineer is responsible for assuring that adequate inspection requirements and hold 4

3 points are included in maintenance, repair, refueling, modification and testing procedures. He is also responsible for the assignment, of qualified inspection personnel required for inspection of quality affecting activities and for coordinating the performance of and conducting the surveil-lance of inservice inspection.

The General Maintenance Quality Control Coordinator is responsible for assuring that adequate inspection require-ments are included in procedures', instructions and/or checklists controlling maintenance, modification and repair activities and related fabrication processes at the General Maintenance facility.

With the exception of that which pertains to Pump and Valve Testing, the Supervisor, Materials Engineering is responsible for establishing the requirements for the Inservice Inspection Program. Quality Assurance is responsible for establishing the requirements for the Inservice Pump and Valve Testing Program. The program for inservice inspection of the reactor coolant system and other safety related systems is contained in Section 4.2, Technical Specifications.

IV.11 Test Control Whenever testing is requix'ed to demonstrate that a material, part, component, or system will perform satisfactorily in service, a test program is instituted employing written and approved procedures which are in accordance with basic requirements established in Technical Specifications, draw-ings, instructions, procurement documents, specifications, codes, standards, and regulatory requirements. The test program requires the identification, control, and documen-tation of all tests, and the preparation of written proce-dures required for satisfactory accomplishment of the testing.

Written test procedures and checklists include: necessary test equipment and calibration requirements; material require-ments; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria; instruc-tions for disposition of deviations; data collection require-ments; and test result approval.

IV-20 Revision 7 November 1980

The Ginna Station Superintendent is responsible for the station test program, which includes the surveillance test program required by Section 4.0, Technical Specifications and testing associated with modifications.

Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Control, and approved by the Ginna Station Superintendent. The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved procedures. When contractors are employed for tests, the contractor is requried to perform testing in accordance with his quality assurance program requirements. All test results are required to be docu-mented, reviewed, and approved by those responsible for performing the test.

When requested by Ginna Station, Electric Meter and Laboratory performs test activities to determine the cause

,3 of protective relay malfunctions. These test activities are performed in accordance with approved procedures by qualified personnel.

Engineering and Quality Assurance are responsible for assuring that required tests for major modifications are included in specifications. Engineering assistance in the preparation of modification-related test procedures may be provided to 4:3 the Ginna Station staff. The Ginna Station Technical Engi-5 neer is responsible for the adequate inclusion of test re-quirements in minor modification design documents and for reviewing modification-related test results for acceptability 6f to design requirements. Reviews of minor modification design by Station Quality Control verifies adequate inclusion of test requirements.

IV.12 Control of Measurin and Test E ui ment The calibration and control system for measuring and test equipment includes calibration procedures, establishment of calibration frequencies, and maintenance and control require-ments of measuring and test instruments, tools, gauges, shop standards, and nondestructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems, and structures. Calibration procedures include step-by-step methods for calibration and requirements for instrument accuracy. Calibration frequency is based on required accuracy, degree of usage, stability characteristics, manufacturer's recommendations, experience, and other condi-tions affecting measurement capability.

Revision 6 6 July 1979

I Control of measuring and test equip'ment requires: a recall

.system assuring timely calibration of equipment; a system providing unique identification of equipment, traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing trace-ability of shop standards*to nationally recognized standards (where national standards do not exist, procedures contain instructions to document the basis for calibration) and periodic revalidation of shop standards; a system providing Revision 6 July 1979 XV-21a

I for records to be maintained which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration dates; and a system controlling the purchase requirements of new equipment to be entered into the calibration and control system including require-ments for accuracy, stability, and repeatability under normal use conditions. In the event a measuring instrument is found out of calibration, an investigation is conducted to determine the validity of previous measurements.

The Ginna Station Superintendent is resonsible for the procedures and program required to assure control and calibration of measuring and test equipment at Ginna Station in accordance with the above requirements. Instruments specified in Section 4.1, Technical Specifications, are included in the program. Tools, gauges, and instruments necessary for maintenance, inspection, and test are cali-brated and controlled in accordance with station procedures.

Measuring, test or inspection equipment used by Quality Control is included in the program.

The Superintendent, General Maintenance, and Superintendent, Electric Heter and Laboratory, are responsible for establish-ing a program and the preparation of procedures for the control and calibration of measuring and test equipment used by their respective departments.

'JV.13 Etandlin Stora e and Shi in The Ginna Station Superintendent is responsible for develop-ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located at Ginna Station. The Superintendent, General Maintenance, and the Superintendent, Electric Meter and Laboratory, are responsible for preparing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located in their work areas. In addition, the Superintendent, General Maintenance, is responsible for preparing and implement-

4) ing procedures for the routine maintenance and inspection of lifting and handling equipment. Under normal circumstances, manufacturer's specific written instructions and recommen-dations and purchase, specification requirements are invoked for cleanliness, preservation, special handling, and storage with respect to environmental requirements. In the absence of, or in addition to, specific manufacturer requirements, the department superintendent may invoke additional require-ments in accordance with department procedures.

The Chief Engineer is responsible for specifying in procurement documents and in engineering specifications that written procedures be used, as, appropriate, for the handling, shipping, storage, cleaning,, and preservation of materials and equipment IV-22 Revision 4 December 1978

procured for modifications. These procedures are prepared by contractors, by the station staff, or by staff members of General Maintenance or Electric Meter and Laboratory, as appropriate. Rochester Gas and Electric procedures are reviewed and approved as described in Section IV.6.

Ln the preparation of procurement documents, department procedures, and contractor procedures, consideration of handling, shipping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of'manufacturing and installation prior to operational acceptance.

Quality Assurance is responsible for review of engineering specifications to assure that proper handling, storing, and shipping requirements have been specified. Quality Control is responsible for surveillance of handling, storage, and shipping activities by suppliers, Rochester Gas and Electric personnel, and contractors.

IV.14 Ins ection Test and 0 eratin Status Equipment or systems not ready for normal service are clearly identified by use of tags, control logs, and other suitable means to indicate the status in a positive manner. The identification is sufficient to positively indicate the status of the particular equipment or system being isolated.

The Ginna Station Superintendent is responsible for indicat-ing the status of operating equipment or systems to be removed from service for maintenance, repair, or modification in accordance with the approved Rochester Gas and Electric Intra-Station Holding Rules. The Ginna Station Superintendent designates personnel who have station holding authority.

Personnel who have station holding authority are responsible for directing the status change of equipment and systems in accordance with the approved company Intra-Station Holding Rules. System status is indicated through the use of hold tags and control logs.

Equipment or system inspection and test status are indicated by use of test tags, labels,'r work inspection and test status sheets. Written procedures control the use of hold tags, .test tags, and labels. The procedures require the recording of the name of the person placing and removing the tag.

Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.

IV-23 Revision 4 December 1978

Fuel handling operations involving fuel assemblies or other radioactive sources are identified and controlled by the use of tags, stamps, or other suitable means.

Maintenance, repair, or modification of components, systems, or structures utilizes procedures, travelers, data sheets and checklists to indicate status of the work, inspections and tests and corresponding acceptance or rejection for a par-ticular component, system, or structure. These job control forms are prepared jointly by the job supervisor and Quality Control and maintained at a designated control location to indicate the status and the completion of required inspection's and tests.

Quality Control monitors the status change activities for their compliance to approved procedures and assures that inspection results are properly logged. Quality Control also establishes the procedures for implementing the inspection status sheets utilized during inservice inspection.

IV.15 Nonconformin Materials Parts and Com onents Procedures are established for the control, evaluation and disposition of deficient material, parts, and components.

Materials, parts, or components which do not conform to the drawing or specification requirements are identified with a hold tag and reported on a nonconformance rep'ort. Quality Control is responsible for issuing nonconformance reports, recommending disposition, initiating repair or rework, and inspecting and approving repaired or reworked items. Prior to installation or use, nonconforming items generally remain in a Quality Control receiving inspection area until approved.

disposition has been received. Nonconforming items which are released for installation to meet critical fabrication schedules are controlled by Quality Control to prevent inadvertant use prior to clearance of the nonconformance.

After installation or use, nonconforming items are identi-fied and controlled until approved disposition has been received.

Nonconformances identified at a supplier's facility and reported to RGSE, which have supplier recommended diposi-tions of use-as-is, or repair, are normally processed by the department originating the procurement. Organizations which specify the requirement being dispositioned are responsible for reviewing and approving the supplier recommended disposition.

This also applies to nonconformances discovered after receipt inspection, during handling or after installation or use.

Items are repaired and reworked only in accordance with approved procedures and current drawings. Quality Control assures that approved procedures and/or drawings are avail-Revision 5 rv-24 April 1979

I II 4

I

able for use prior to the repair or rework and reinspects all repaired or reworked items. The repair ofor the rework must affected be verified as acceptable by an inspection item which is at least equal to the original inspection method.'V-24a Revision 5 April 1979

I ~ I r 4 Jy II N

items which are accepted "use-as-is" are fully documented with the drawing 'or specification requirement and technical justification for acceptance. All such items are approved responsi-prior to use by the cognizant organization having"use-as-is" 4 bility for the requirement. In addition, those nonconformances which also deviate from a Design Criteria requirement shall require additional approval of the Vice 2[ President, Electric and Steam Production.

3~ Quality Control issues monthly nonconformance report summaries

~

which are reviewed and analyzed hy Quality Assurance.

Unsatisfactory trends are reported to management by means of the .corrective action report in accordance with Section IV.16.

IV.16 Corrective Action Quality Assurance establishes the requirements for identi-fication, review and correction of significant conditions adverse to quality. Significant conditions adverse to quality such as failures, malfunctions, deficiencies, deviations, .defective material and equipment, and non-conformances are reported on a corrective action report.

Significant conditions'dverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high maintenance items, and operating procedure deficiencies. The corrective'ction report identifies the condition, the cause of the condition, and the corrective action taken.

Corrective action reports may be initiated by Quality Assur-41 ance, Engineering, Ginna Station, Fuel Planning, General Maintenance, Electric Meter and Laboratory or Purchasing staff personnel. Corrective action reports initiated at Ginna Station" and General Maintenance are submitted to Quality Control for review and subsequent processing.

Corrective action reports initiated by departments other than at Ginna Station or General Maintenance are reviewed and processed by Quality Assurance.

When a significant condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect 2

of continuing the activity. If continuing the activity would cover up or preclude identification and correction of the deficiency, continuing the activity would increase the extent of the deficiency or lead to an unsafe condition, stop work action is taken. The Ginna Station Quality Control 3 Engineer has authority to stop work on maintenance, repair, inservice inspection, refueling, modification, testing or inspection deficiencies, at Ginna Station. The Ginna Station Quality Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.

IV-25 Revision 4 December 1978

The Plant Operations Review Committee reviews all corrective action reports initiated at Ginna Station and recommends interim corrective action if the action does not represent a change in configuration of the deficient item. The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating procedures.

Significant conditions adverse to quality identfied in General Maintenance are processed by the Quality Control 3( Coordinator. The General Maintenance Quality Control Coor-dinator has the authority to stop or limit work activities within his department.

Conditions adverse to quality which involve design defi-ciencies or, a recommended corrective action which involves a design change are reviewed by Ginna Station or Engineering as applicable. The cognizant oiganization determines the cause of the condition and recommends corrective action to preclude repetition.

Quality Assurance reviews all corrective action, reports to assure that the cause of the condition has been determined and that corrective action.has been taken to preclude repe-tition. Quality Assurance also reviews nonconformance report summaries for unsatisfactory trends and initiates a corrective action report if such a trend occurs.

Completed corrective action reports are submitted to the

2. Vice President, Electric and Steam Production to keep him aware of significant conditions adverse to quality.

IV.17 Qualit Assurance Records Quality Assurance is resonsible for establishing the basic requirements for quality assurance record retention and maintenance. The Ginna station Superintendent is responsible for the retention and maintenance of plant'records. Engineer-ing is responsible for the retention and maintenance of 4I Engineering records. Quality Assurance, Purchasing, Fuel Planning, General Maintenance and Electric Meter and Labora-tory departments are responsible for assuring the maintenance and retention of records which they originate.

31 This may be accomplished either by retaining the records in their depart-ment or by forwarding them to Ginna Station or Engineering, as appropriate. Each organization retaining records is responsible for preparation, review, approval, and imple-mentation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements. The records which fall within quality assur-ance record requirements include those records required by Section 6.10 of the Technical Specifications and the quality assurance program. All records associated with the operation, maintenance, repair, inservice Revision 5 April 1979 IV-26

'I g

L ll I It I

e I

~I I ~ q 4

'x .I ft I

L I

' L ~

t

'L L'

~

V I ~

gP

inspection, refueling, modification, inspection and testing of structures, systems, and components covered by the quality assurance program are included.

Ginna Station records include operating logs; the results of inspections, tests, and the monitoring of plant activities; 4 3 drawings, procurement documents and material analyses; calibration procedures and reports; and nonconforming and corrective action reports. Records of the qualification of personnel, procedures, and equipment for special processes and the results of reviews are maintained by Engineering.

Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.

4l The requirements and responsibilities for record accessibility and transmittal are described in the Quality Assurance manual sections as appropriate. Requirements and responsi-bilities for preparation, inspection, identification, review, storage, retrieval, maintenance, and the retention of quality assurance records are in accordance with applicable quality assurance record procedures, codes, standards, and procurement documents. Records are available to authorized personnel.

Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible record control activity.

Records are either stored in record storage facilities which are designed to prevent destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept in two separate storage locations in separate buildings which are physically isolated from each other.

Record keeping procedures provide for receiving, classifying, indexing, labeling, and preparing records for storage. The procedures establish retention requirements, accessibility, control of obsolete record destruction, and control for issuance and return of all records.

The Ginna Station Superintendent is responsible for main-taining plant operating records as required in Section 6.10, Technical Specifications.

Engineering is responsible for maintaining design records, such as specifications, drawings, design review reports, and design control documentation; quality assurance records, such as audit reports and supplier surveillance reports; purchasing records, such as supplier qualifications, bid evaluatons, and purchase orders.

IV-27 Revision 4 December 1978

Ivsls Audits Compliance with all aspects of the quality assurance program and the effectiveness of the program is determined by audits of all organizations performing quality affecting activities.

Quality Assurance is responsible for conducting audits of each organization involved in the quality assurance program on a planned, periodic basis. Audit intervals are based on the status and safety important of activities being performed.

( Audits of Ginna Station, Engineering, General Maintenance,

)Electric Meter and Laboratory and Purchasing organizations are performed annually. Table-IVe18-1 is a list of the activities to be audited in each of the organizations. Audit

  • frequencies are based on the level of activity in each area.

Audit schedules are established to assure that each of the 4(activities are audited at the frequency specified in Technical Specifications 6.0 which includes annually for those activ-

,5 ities required to meet the criteria of Appendix B, 10CFR.

Additional audits are conducted as required by special con-

. ditions or circumstances.

Each audit requires the development of an audit plan to provide information about the audit, such as the functional areas to be audited, the names and assignments of those who will perform the audit, the scheduling arrangements, and the method of reporting findings and recommendations. The audits are performed in accordance with written procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.

Audit results are documented and reported to the person having supervisory responsibility in the area audited, the Vice President, Electric and Steam Production, and the 2 Nuclear Safety Audit and Review Board. Within a specified period of time, the person having supervisory responsibility

.in the area audited is required to review the audit results, .

take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.

2 'nd Quality Assurance is responsible for developing audit plans audit checklists, designating and training audit personnel, and conducting audits.

Audits may be conducted by Quality Assurance engineers or other qualified personnel, such as technical specialists from other company departments and outside consultants.

Audits of major contractors, subcontractors, and suppliers are conducted during the early stages of design and procure-ment, as required, to evaluate their quality assurance program for compliance with all aspects of the procurement documents. Audits are conducted, as required, to assure that major contractors, subcontractors, and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents. During the project, Revision 5 XV-28 April 1979

I f

I'

additional audits are performed, as required, to assure all quality assurance program requirements are properly imple-mented in accordance with procurement documents.

Quality Assurance performs regular analyses of audit results 2

to evaluate quality trends. Results of these analyses will be provided to management for their regular review.

IV-29 Revision 4 December 1978

'0 Table IV.l-l Quality Assurance Program Procedures Subject Listing Appendix B Qualit Assurance Procedures Criteria Indoctrination of Quality Assurance and Supervisory Personnel

~

of Quality Assurance Personnel

'Training Management Review of the Quality Assurance Program Periodic Review of Quality Assurance Procedures Quality Assurance Group Organization and Responsibilities Quality Assurance Review of Rochester Gas and Electric Design Criteria Quality Assurance Review of Rochester Gas and IIX Electric Engineering Specifications Quality Assurance Review of Architect/Engineer's XIX Design Documents Requisitioning Quality Assurance Services IV Quality Assurance Review of Rochester Gas and IV Electric Procurement Documents Preparation, Review and Approval of Rochester Gas IV and Electric Q.A. Specifications Preparation, Review and Approval of Ginna Station Quality Assurance Manual Preparation, Review and Approval of Quality Assurance Procedures Review of Departmental Procedures VI Preparation, Review and Approval of Procedure VI Deviation Requests by Quality Assurance Qualification of Suppliers VII Supplier Surveillance VII IV-30 Revision" 4 December 1978

Table IV. l-l (cont'd)

Appendix B Qualit Assurance Procedures Criteria Control of Supplier Performance VII Quality Assurance Bid Evaluations VII QA Review of Inservice Inspection .

Preparation, Review and Processing of Corrective XVI Action Reports by Quality Assurance Qualification of Auditing Personnel XVIII Audit Scheduling and Planning XVIII Performance of Quality Assurance Audits XVIII Reporting and Follow-Up of Audit Findings XVIII Conduct of Quality Assurance During and in XVIII Follow-Up of USNRC and Management Audits Revision 7 November 1980 IV-31

Table IV.l-l (cont'd)

Appendix B Ginna Procedures Criteria Ginna Quality Assurance Program Implementation Training of Ginna Personnel Ginna Organization Work Start Authorization Modification Control Activities Ginna Station Modification Evaluation Preparation, Review and Approval of Design Documents Preparation, Review and Approval of Minor Modification Safety Analysis Control of Procurement, Documents for Purchased IV Materials, Parts, Components and Services Plant Procedures Plant Procedure Document, Control VX Control of Engineering Documents VI Control of NRC Correspondence VI Receipt and Acceptance of Purchased Materials VII Supplier Qualification Technical Evaluation VII Control of Purchased Services VII Control of Accepted Material, Parts and Components VIII Identification and Marking of Material VIII Control of Welding IX Welding Equipment Performance Verification IX Nondestructive Examination Inspection and Surveillance Activities Revision 5 IV-32 April 1979

~ ~

a

Table IV.l-l (cont'd)

Appendix 8 Ginna Procedures Criteria Qualification of. Surveillance and Inspection Personnel Inservice Inspection X, XIV Performance of Tests XI Qualification of Test Personnel XI Calibration and Control of Test Instruments XII Calibration and Control of Mechanical Measuring XII Tools and Equipment Calibration and Control of Process System XII Instrumentation Control of Material Handling and Handling Equipment XIII Storage and Preservation of Materials XIII Station Holding Roles XIV Test Status Control XIV Control and Disposition of Nonconforming Materials XV Issue of Nonconformance Reports XV Corrective Action at Ginna Station XVI Control of Quality Assurance Records XVII Record Storage Facility and Equipment XVII System and Equipment Histories XVII Ginna Station Response to Internal Audits XVIII Revision 5 IV-33 April 1979

~'

r

'I f

ht H

Table IV.l-l (cont'd)

Appendix B En ineerin Procedures Criteria Indoctrination and Training I n

Engineering Department Organization and IX Responsibilities Preparation, Review and Aprpoval of Design Input Documents Preparation, Review and Approval of Design Analyses Fngineering Drawings Preparation, Review and Approval of Specifications Design Verification IIX Design Interface Control XII Preparation, Review and Approval of Safety Analyses XXI Review and Approval of Architect Engineer or Consultant Design Documents IIX Preparation, Review and Approval of Field Change Requests Purchase Requisition IV Engineering Procedures Engineering Procedure Deviation Request Distribution and Control of Documents by VI the Control Number Method Control of Documents by the List of VI Current Revisions Method Distribution and Control of Documents by Project VI Correspondence Procedures Receipt, Control and Distribution of Drawings and Aperature Cards VI Supplier Evaluation VII Revision 5 April 1979 IV-34

I 0

1

'I k

(

k

\

EI I'

j~

~

Table IV.l-l (cont'd)

Appendix B En ineerin Procedures Criteria Preparation, Review and Approval of Bid Requests, VII Bid Evaluations and Recommendations for Award Engineering Review of Nonconforming Materials, Parts XV or Components 4

Initiating and Responding to Corrective Action Reports XVI Records XVII Engineering Response to Audits XVIII Revision 5 April 1979 IV-35

pl Table IV.l-l (cont'd)

Appendix B Purchasin Procedures Criteria Periodic Review of Purchasing Procedures Indoctrination and Training of Purchasing Personnel Purchasing Department Organization and Responsibilities Preparation, Review, Approval and Issuance of IV Purchase Orders and Changes to Purchase Orders Requests for Bids and Bid Evaluation IV Purchasing Procedures Purchasing Procedure De~iation Request Supplier Evaluation VII Establishment and Maintenance of Qualified VII Suppliers List Supplier Nonconformance Processing XV Purchasing Department Response to Corrective XVI Action Reports and Corrective Action Reporting Purchasing Records XVII Purchasing Response to Audits XVIII IV-36 Revision 4 December 1978

\

Table IV. 1-1 (cont'd)

I Appendix B General Maintenance Procedur'es Criteria Indoctrination and Training General Maintenance Organization and Responsibilities Preparation, Review and Approval of Purchase IV Requisitions and Related Procurement Documents Quality Maintenance Procedures Quality Maintenance Procedure Deviation Request Preparation, Review and Approval of General Maintenance Fabrication Route Cards General Maintenance Instructions for Material Handling and Lifting Equipment Control and Distribution of Documents Regulating VI Safety Related Activities Receipt and Acceptance of Purchased Materials VII Control of Accepted Material, Parts and Components VIII Traceability of Material VIII Issue, Control and Storage of Weld Consumables VIII 7 Welding Procedures IX 4> Welding Procedure Qualification IX Heat Treating Procedures IX 4 Welder Qualification and Currency

~

7 Inservice Inspection IX Control of Welding IX 4

Welding Equipment Performance Verification IX Nondestructive Examination Procedures IX Revision 7 November 1980 IV-37

Table IV. l-l (cont'd)

Appendix B General Maintenance Procedures I

Criteria 4 (

Nondestructive Examination Procedures Manual IX 7'ondestructive Examination Personnel Certifications IX Inspection and Surveillance Activities Qualification of Surveillance and Inspection Personnel Calibration and Control of Nondestructive XII Examination Instruments Inspection and Maintenance of Material Handling XIII Equipment Overhead and Gantry Cranes Inspection and Maintenance of Portable Lifting XIII and Handling Equipment Underhung Cranes, Jib Cranes and Monorail Systems XIII Slings and Related Apparatus XIII Classification and Training of Material Handling XIII Equipment Personnel Mobile Hydraulic Cranes XIII Base Mounted Drum Hoists XIII Forklift Loading Forks XIII Control and Disposition of Nonconforming Material, XV Parts and Components Corrective Action at General Maintenance XVI Quality Maintenance Records XVII General Maintenance Response to Internal Audits XVIII Revision 7 November 1980 IV-38

0 Table IV.l-l (cont'd)

Appendix 8 Electric Heter and Laborator Procedures Criteria Quality Assurance Program Implementation for Electric Meter and Laboratory Department Training of Electric Meter and Laboratory Personnel Periodic Review of Quality Relay Procedures Electric Meter and Laboratory Organization Design/Modification Activities Control Control of Procurement Documents for Purchased IV Materials, Parts, Components and Services Preparation, Review, and Approval of Electric Meter V and Laboratory Procedures Control of Electric Meter and Laboratory Procedures VI Supplier Qualification Technical Evaluation VII Performance of Tests at Ginna Station XI Performance of Tests at Electric Meter and XI Laboratory Shop Documentation, Evaluation and Disposition of Test Xl Results Qualification of Test Personnel Calibration and Control of Test Instruments XII Control and Disposition of Nonconforming Materials XV Corrective Action at Electric Meter and Laboratory XVI Control of Quality Assurance Records XVlI Response to Internal QA Audits XV1II IV-39 Revision 4 December 1978

I TABLE IV. 4-1 Procurement Document Re uirements Items to be considered for inclusion in procurement documents include:

formed.

  • 2. Technical Re uirements by reference to specific drawings, specifications, codes, regulations, procedures or instruc-tions including revisions, therto that describe the items or services to be furnished. Also identified shall be test, inspection and acceptance requirements, and any speci.al re-quirements for such activities as designing, identifi.cation, fabrication, cleaning, erecting, packaging, handling, shpping and extended storage.
  • 3. Qualit Assurance Pro ram Re uirements which require the supplier to have a documented quality assurance program that implements portions or all of 10CFR50 Appendix B as well as applicable quality assurance program requirements of other nationally recognized codes and standards. Also included shall be the requirement that the supplier in-corporate appropriate quality assurance program require-ments in subtier procurement documents.
  • 4. Ri ht of Access to include the facilities and records of the supplier for source inspection and audit by the Purchaser or parties designated by the purchaser. Also included shall be provisions for the identification of witness and hold points and the minimum time of advance notice.
  • 5. Documentation Re uirements Submittal approval and retention requirements for documents such as quality assurance manuals, special process and test procedures, materials records, calcu-lations and analyses.
  • 6. Nonconformances Requirements for reporting and disposition of nonconformances to procurement requirements.
  • Included in the review by Quality Assurance/Quality Control.

Revision 5 April 1979 IV-40

J t

1

TABLE IV.18-1 Audit List Functional Or anization Activities Audited Engineering Indoctrination and Training Design Control Procurement Document Control Document Control Records Procurement Control Purchasing Indoctrination and Training Procurement Document Control Procurement Control Ginna Station QA Indoctrination and Training Ginna Staff Training, Retraining-Qualification and Performance Modification Maintenance and Repair Procurement Control Document Control and Records Inservice Inspection Surveillance Testing Handling, Storage and Shipping Facility Operation Conformance to all provisions contained in Technical Specifications and applicable license conditions Refueling Control of Measuring and Test Equipment Health Physics 6 Chemistry Security Plan'nd Procedures Emergency Plan and Procedures Inspection 6 Surveillance Fire Protection Corrective Action associated with deficiencies occurring in facility equipment, struc-tures, system or method of operation IV-41 Revision 4 December 1978

P il V

TABLE IV.18-1 (cont'd.)

Audit List Functional Or anization Activities Audited General Maintenance Indoctrination and Training Maintenance and Repair Procurement'ontrol Document Control sl ~) Fabrication/ Inspection Control Control of Measuring and Test Equipment Special Processes Handling, Storage and Shipping E lectx ic Meter and Lab Indoctrination and Training Procurement Control Document Control Handling and Shipping Control of Measuring and Test Equipment Test Control IV-42 Revision 5 April 1979

A ~ ~

r 4

I

R.E. GINNA NUCLEAR POWER PLANT MANAGEMENT ORGANIZATION CHART CHAIRMAN OF TMC ROAAD SVFCRVISIOH AHO ADMINISTRATION OTNCR FUNCTIONAL ACIATIOlSNIPS

~ AESPOHSISLt FOA FIRE PROTECTION

~ ROC RAN PACSIDCNT EXECVTIVC VlCC FACSIOCNT I

I I

SA, V,P. I SR, V.F, CCHtAAL StAVICES I FIHAHCC l AATCS I

I I

I I

I I

H I I

I V.P, KLtCTRIC TRANSNISSION V. P t LECT SIC V.P, I CHIEF VICE FAESIDtNT VICt FRKSIOCNT DtsTRISUTION l SISTER FIAHNINC CACINtCR ELECTRIC I SttAN NSARS AATCs ANO OPt RATION F AOOVCTION ~

VTILIIAtION I I

I I

I SUPCRINTEN DENT CCMCAAL HAHACCR DIV SUPT ~ ~ DIV. SUPT, KLtCT I I FURCHASIMC ELECT, TRANS, ~ SISTEN PLANN'INC I NUCLCAA I'USLIC AFFAIRS DIST, ~ I UTiL Ot'ERAT t ON I ~ ADDUCTION I

I I

I I

ASSISTANT CHIIF I Sl'PT,, tLCCTRIC tMCINtCA ASST CHIEF I SVPCRIHTKNDENt llANACFR OF F VRCNAS INC PORC AC CRT HETER l LAS tNCINEERIFC CNCINEER I CIMMA STATIOH SCCVRITT CONSTAVCTION I I I L

I I

SVPtRIMTtNDCNT HANACKR SUPERVISOR HAHACtRS ASSISTANT DtSICN I CONSTR CKHCRAL OVALttt SVF tRIHTENDCHT ~,HVC LtAR MAINTENANCE ASSVRAHCC SLCVRttt 00 3; N g 0H 8

ELECTRIC HETER

~ tAR STAFF I

ICN CHC I I CONSTR.

Ntt1$

~ tCO PD 5 ~ DOCUMENT CONTROL. OAAFTIHC AHD TAAIHIHC NAI~

CtNC AAI STAFF I

OUALITT

. I OVALITT I

FIANT OPERATIONS S tAFT I

TRAININC ADVISORS I CINXA STATIC OFCAHIIATION I

L I L J O IV. 2-1

'NOVEHBER 1980

0 ROCHESTER GAS NG ELECTRIC (XYIPORATION GINCCA STATICII ORGA4IZATIOtt SUPERINTENDENT TRAINING COORD I tCATOR ASS I STANT SUPERINTENDENT I (iLYICP. ASSIS AMT fOA OPERATIOXAL ENGINEERS ASS('SSMENc SLPERVISO( OPERA T I ONS F IRE fROTECTION HAINTENANCE OFFICE TECHNICAL DUALITY COcctRCL CHEHIStAY hag Eh~v I NEER AtO SAFETY COORDo ENGINEER SLPERYI SOR END ltiEER ENGlt'EER HEALTH PHYSICS SRO HEALTH (PERAT IOtlS QIEH I ST PHYSIC( STS SUPERVISOR ~ HATER I ALS Ph INTEt(ANCE laC NUCLEAR RESULTS d TEST SRO COORD It(ATOR SUPERV I SOR SUPERVISOR ENGINEER SUPERV I SOR TECH4ICIANS CtcEtc. I S TRY RAD I AT ICCI S~IFT SUPERYISOR TECHIIICl AHS PROTECTION I/SH I FT STOCKROOM HAINTENANCf: IdC AND TECHNICIANS SRO f OREHEN ELECTRIC TECHNICIANS fOREMEN r HEAD (TINTROL OPERATOR I/SHIFT FITTERS TECHNICIANS a RO KCHANICS REPAIRMEN HANDYMEN ELECTRICIAt5 CONTROL (PERATOR SHIFT TECCttl CAI. I/SHIFT ADY I SCR ~ RO I/SMIfT AUXILIARY OPERATOR 2/SHIFT REPORTING f 'ta EST stA Is

~cUc<ICAT ICcl BE Elti.ER SBO OR H'YE SS OEG"EE.

AEGUIRED 04LY DURINT PcAER off tcATIDN.

~

oi (tt f Figure IV.2-3 November 1.980

r 0 RXEESTER CAS f E EC. R C CO?i ORATIOS GiÃEB.< YJiI:STEEP'iCE TA.. c" G.".GA::IZATION CiiART Iay ~

QUI~i ITY COSTROL COORS GATOR ASSI:'.TA::T SUPE VISOR SUP . VISOR SUPERVISOR . SUPERVISOR iUILDIXG SUPERVISOR c esOgS FIELD SERVICES  : INSPECTION l%~IALS HAIR EY.ANCE I ENQ~~Q

.Re pm 8 Ul

. D'p.

Qp Figure lV.2-4 t November l980

,LD CQ C>

4 V

Rochester Gas and Electric Corporation Engineering Department Organisation Vice President and Chief Engineer As ~ istant Chief Engineer Assistant Chief Engineer- Administration, Maintenance, Engineering and Construction Quality Assurance, Drafting, Environmental Construction Nuclear Structural Engineering Mechanical Engineering Engineering Electrical Engineering Engineering'eneralMaintenance Drafting Quality Assurance Records Figure IV.2-5 November 1980

I' t

~

r 1

J

Rochester Gas and Electric'orporation Ginna Station Review and Audits Functions NSARB H QA PORC I

Electric Meter Purchasing General Engineering Plant and Lab Maintenance UA IO 8 h <

9 O'

IO

~

S 0 Review Audit Figure IV. 2-6

% ?ebruary 1, 1976

e P

chal

&-~4%

Guv&>

5~~~ +~M Cpm

~onymy GL.

~),",'P~

Introduction'a i+~ ll-l->4 1-l5-7-P up~

In a May 28, 1974 letter from Mr. Robert A. Purple, the United States Atomic Energy Commission asked several questions on the R. E. Ginna Quality Assurance Program for Station Operation. The information requested and further clarification of'he program are provided in Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. Supplement IV is a revised description of the R. E. Ginna Quality Assurance Program for Station Operation and supersedes Supplement II in its entirety. The following revisions have been made to the description of the program:

Section IV.2 Additions That all Quality Assurance, Quality Control, Engin-eering, and Purchasing procedures are reviewed for adequacy at least once every two years.

That the list of structures, systems, and components covered by the quality assurance program are based on the list in Section 1.2.1 of the FSAR.

That management review of the quality assurance program may be in a form other than an audit.

That the Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years.

That the Chairman of the Nuclear Safety Audit and Review Board reports to the Chairman of the Board of Rochester Gas and Electric Corporation on NSARB activities.

Section IV.3 Additions That spare or replacement parts meet, at least, the requirements of the original design.

IV-i Revision 1 August 1974

That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.

That design deficiencies are documented and controlled in accordance with Section IV.16.

That, design documents are collected, stored, and main-tained in accordance with Section II.17 and a listing of which design documents are maintained.

Clarification Clarified which design documents are reviewed by Quality Assurance.

Section IV.4 Additions That procurement documents for spare or replacement parts are processed in the same manner as other procurement documents.

That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.

That the documents are available for verification in Purchasing and plant records.

That Quality Control reviews procurement documents for spare and replacement parts for similarity to the original requirements, and adequacy of quality require-ments.

Section IV.5 Clarification Clarifies which documents are reviewed by Quality Assurance.

Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.

IV-ii Revision 1 August 1974

t It

That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.

Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.

Added Quality Control responsibilities for sur-veillance and inspection of special process activi-'ies.

Section IV.10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of the activity.

That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification of the organization responsible for performing the inspection, the a'cceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity.

That inspection equipment. is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.

Section IV.11 Addition That test procedures include test methods and test instrumentation definition.

IV-iii Revision 1 August 1974

I Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.

Section IV.14 Addition That written procedures control the use of hold tags, test. tags and labels and that the procedures require the recording of the name of the person placing and removing the tag.

Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.

Section IV.17 Additions That plant records include operating logs, drawings, specifications, calibration procedures and reports, nonconformance reports, and the results of inspec-tions, tests, audits and the monitoring of plant activities and material analyses.

That quality assurance records of special process activities are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.

That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.

IV-iv Revision 1 August, 1974

Section IV.18 Addition That Quality Assurance is responsible for conducting the audits listed in Table IV.18-1.

In July 1974, the United, States Atomic Energy Commission requested information on the conformance of the R. E. Ginna Quality Assurance Program for Station Operation to the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book Revision 0) . The infor-mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. The following changes have been made to Supplement IV:

Section IV.l Additions A description of the extent to which the quality assurance program conforms to the document entitled "Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants",

Revision 0 dated October 1973 (Orange Book Revision 0).

Revision 1 August 1974

l I

'I

TABLE OF CONTENTS Section Title Pa<ac QUALITY ASSURANCE PROGRAM FOR STATION OPERATION IV.1 Quality Assurance Program IV-1 IV.2 Organization IV-5 IV.3 Design Control IV-12 IV.4 Procurement Document Control IV-16 IV.5 Instructions, Procedures, and Drawings IV-18 IV.6 Document Control IV-21 IV.7 Control of Purchased Material, Equipment IV-23 and Services IV.8 Identification and Control of Materials, IV-28 Parts, and Components IV.9 Control of Special Processes IV-30 IV.10 Inspection IV-31 IV.11 Test Control IV-34 IV.12 Control of Measuring and Test Equipment. IV-35 IV.13 Handling, Storage, and Shipping IV-37 IV.14 Inspection, Test, and Operating Status IV-39 IV.15 Nonconforming Materials, Parts, and IV-41 Components IV.16 Corrective Action IV-42 IV.17 Quality Assurance Records IV-45 IV.18 Audits IV-47 IV-vi Revision 1 August 1974

1 LIST OF TABLES Table Number Title Pa<ac IV.l-l Quality Assurance Program IV-51 Procedures Subject Listing IV.4-1 Procurement Document Requirements IV-77 IV.18-1 Audit List IV-78*

LIST OF FIGURES Fi ure Number Title Pacae IV.2-1 Management Organization IV-79*

IV.2-2 Quality Assurance Organization IV-80 IV.2-3 Ginna Station Organization IV-81*

IV.2-4 Quality Control Organization IV-82 IV.2-5 Engineering Department. Organization IV-83 IV.2-6 Review and Audit Functions IV-84*

  • Table IV.18-1, Figure IV.2-1 and Figure IV.2-3 Have been revised. Figure IV.2-6 has been added.

IV-vii Revision 1 August 1974

I I QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Corpora-tion to assure safe and reliable operation of the R.E. Ginna Nuclear Power Plant. This program applies to all activities affecting the safety related functions of the structures, systems, and components that prevent or mitigate the con-sequences of postulated accidents that could cause undue

, risk to the health and safety of the public. These quality affecting activities include operating, maintaining, repair-ing, refueling, and modifying.

The basic Rochester Gas and Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate State-ment of Quality Assurance Policy. This policy is imple-mented by the Senior Vice President, Electric and Steam through the Quality Assurance Coordinator and the Ginna Station Superintendent.

The program is governed by a Ginna Station Quality Assurance Manual which contains the requirements and assignment of responsibilities for implementation of the program. The manual is developed and maintained by the Quality Assurance Coordinator and reviewed and approved

>>I by the Senior Vice President, Electric and Steam.

The program is implemented through Quality Assurance, Quality Control, Engineering, and Purchasing Pro-cedures. .These procedures are developed by the responsible organization (i.e., Quality Assurance, Operations, Engineer-ing, and Purchasing) and reviewed and approved by the Quality Assurance Coordinator. The procedures are contained in separate manuals maintained by the responsible organization.

All these procedures are reviewed for adequacy at least once every two years by the responsible organization. Table IV.

1-.1 provides a listing of the subjects and a short descrip-tion of the subject matter which is contained in the pro-cedures.

Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual. Organizational responsibilities are described in Section IV.2.

The quality assurance program covers all existing Seismic Category I structures, systems, and components, including their foundations and supports. Activities, affecting the quality of these structures, systems, and components are controlled to an extent consistent with their importance to safety. A detailed listing of the structures, systems, IV-2

I and components covered by'he quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assurance Manual.

Details of the system boundaries and the quality classifica-I tion of water-and-steam-containing components are contained on system flow drawings. The listing of structures, systemsi and components covered by the quality assurance program D

and the system flow drawings are prepared and maintained by Engineering t and reviewed and approved by Quality Assurance.

Modifications or additions to existing structures, systems, and components are designated the same seismic classifica-tion as the existing system. New structures, systems, and components are designated a seismic classification in accordance with the guidelines in USAEC Regulatory Guide 1.29.

Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced. Personnel responsible for performing activities affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures. Refresher sessions XV-3

0 are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure. Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.

Quality Assurance assists in establishing training re-quirements and assures that personnel are trained by auditing training records.

In addition to training in quality assurance, each department conducts on-the-job training to assure that personnel are qualified for their primary work assignments.

The Ginna Station Superintendent is responsible for the formal training, qualification, licensing, and requali-I fication of operators, as necessary. Where necessary, personnel are trained in radiation protection, plant safety and security.

The Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that it is meaningful and is effectively complying with corporate policy and 10CFR50, Appendix B. 'his review consists of audits or a review equivalent to an audit performed by company personnel or outside consultants. Reviews will be conducted every six months during the first two years, that the program is implemented.

IV-4

The quality assurance program is designed to,meet the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants." The program con-forms to the following AEC Regulatory Guides and ANSI Standards:

a. AEC Regulatory Guide 1.8, "Personnel Selection and Training", and. regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book Revision 0)
b. AEC Regulatory Guide 1.28, "Quality Assurance Program Requirements (Design and Construction)",

and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book Revision 1)

Note: The requirements and guidelines contained in ANSI N45.2 and associated standards are applied only to Seismic Category I structures, systems, and components, including their foundations and supports.

c. AEC Regulatory Guide 1.30, "Quality Assurance Requirements for the Installation, Inspection, and Testing of Instrumentation and Electric Equipment"
d. AEC Regulatory Guide 1.33, "Quality Assurance Program Requirements (Operation) ", and regula-tory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants",

Revision 0 dated October 1973 (Orange Book Revision 0)

IV-4A Revision 1974 1'ugust.

~ ~

l l

e. AEC Regulatory Guide 1.37, "Quality Assurance Requirements for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants"
f. AEC Regulatory Guide 1.38, "Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants"
g. AEC Regulatory Guide 1.39, "Housekeeping Require-ments for Water-Cooled Nuclear Power Plants"
h. AEC Regulatory Guide 1.58, "Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel"
i. AEC Regulatory Guide 1.64, "Quality Assurance Requirements for the Design of Nuclear Power Plants" j.

C AEC Regulatory Guide 1.74, "Quality Assurance Terms and Definitions"

k. Extracts from ANSI N45.2.8, "Supplementary Quality Assurance Requirements for Installation, Inspec-tion, and Testing of Mechanical Equipment and Systems for the Construction'Phase of Nuclear Power Plants", contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book Revision 0)
1. ANSI N45.2.9, "Requirements for Collection, Storage, and Maintenance of Quality Assurance Records for Nuclear Power Plants" Note: When record storage facilities are not designed in accordance with the require-ments of ANSI 45.2.9, duplicate records are kept in two separate storage locations in separate buildings which axe physically isolated from each other.
m. ANSI N45.2.12, "Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants""

IV-4B Revision 1 August 1974

~ I

n. ANSI N45.2.13, "Quality Assurance Requirements for Control of Procurement of Equipment, Materials and Services for Nuclear Power Plants," and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book Revision 1)

IV-4C Revision 1 August 1974

~ '

l, s~

Q

The major organizations participating in the quality assurance program are the Purchasing, Engineering, and Electric and Steam Production Departments; Quality Assurance; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board. Figure IV.2-l is an organizational chart showing these organizations and their relationship to. the corporate organization.

Positions responsible for the principal elements of the quality assurance program are the:

Chairman of the Board Senior Vice President, Electric and Steam Vice President and Chief Engineer Quality Assurance Coordinator Quality Assurance Engineer, Operations Quality Assurance Engineer, Design Quality Assurance Engineer, Welding and Non-destructive Examination Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer In addition to the above individuals, two advisory groups are utilized to review and audit plant operations. These are the Plant Operations Review Committee and the Nuclear

Safety Audit and Review Board. The Plant Operations Review Committee acts in an advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and Review Board advises the Senior Vice President, Electric and Steam. The qualifications of members and the responsibilites of these organizations are described in Appendix A to Provisional Operating License No. DPR-18, Section 6.0, Technical Specifications.

The Chairman of the Board of the Rochester Gas and Electric Corporation directed the establishment of the quality assurance program and issued the governing policy t

statement. He has established the Nuclear Safety Audit.

and Review Board to review and audit plant operations.

The Chairman of the Nuclear Safety Audit and Review Board is responsible'to the Chairman of the Board on all activities of the Nuclear Safety Audit and Review Board.

The Senior Vice President, Electric and Steam has cor-porate responsibility for operation of Ginna Station in I accordance with applicable regulatory requirements. He is responsible for establishing the policies and reguire-ments necessary to assure safe and reliable, operation of Ginna Station. He is also responsible for those items XV-6

delineated in Section 6.0, Technical Specifications. He has overall responsibility for and authority to.direct quality affecting activities. He has assigned the re-sponsibility for the detailed development and overall coordination of the quality assurance program to the Quality Assurance Coordinator.

The responsibility for proper implementation of -the qua-lity assurance program requirements at Ginna Station has been assigned to the Ginna Station Superintendent.

The Vice President *and Chief Engineer is responsible for the design of plant modifications in accordance with applicable design bases, regulatory requirements, codes, and standards. He has the responsibility for prep a ring drawings and specifications for the procurement of materials and components for plant maintenance and modification as required. 'e is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing maintenance and repair procedures for major equipment.

The Quality Assurance Coordinator is responsible for establishing and executing the overall quality assurance program. He is responsible for assuring that the program satisfies the requirements of 10CFR50, Appendix B, that all applicable regulatory guides have been considered,

and for keeping the total program updated. He is re-sponsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and reliably are established and followed. He provides management with objective information concerning quality, independent of the individual or group directly responsible for per-forming the specific activity. He has the authority and organizational freedom to assure all necessary quality affecting activities are performed. He is responsible for maintaining a quality assurance staff and directing its activities and for establishing and implementing a comprehensive audit program.

The Quality Assurance Coordinator is a graduate engineer with at least six years of responsible experience, of which two years is in quality assurance and three 'years in the design or operation of nuclear or fossil fuel power plants.

The Quality Assurance Engineer, Operations is responsible for supervising the operational quality assurance program for Ginna Station. This includes writing quality assurance policies and procedures, coordinating supplier qualification and surveillance, and establishing and implementing the in-service inspection program. He is responsible for staying

current in all applicable regulatory and code quality assurance requirements and providing guidance and assistance r

to the Ginna Station Superintendent, the Ginna Station Quality Control Engineer, and other affected personnel on these requirements.

The Quality Assurance Engineer, Design is responsible for interpreting the requirements of 10CFR50, Appendix B and applicable regulatory and code requirements related to plant modifications and providing guidance and assistance to engineerin'g and station personnel on these requirements.

He writes quality assurance policies and procedures related to design activities and interfaces between Engineering and other departments. He is responsible for reviewing engineering and procurement documents to assure that quality assurance requirements are incorporated.

The Quality Assurance Engineer, Welding and Nondestructive Examination is responsible for developing and qualifying procedures for special processes. He is also responsible for assuring that personnel are trained and qualified in special processes and for inspection activities in-volving nondestructive examination.

The Purchasing Agent is responsible for the procurement of materials, services, and components, from qualified IV-9

suppliers, in accordance with applicable commercial, technical, and quality requirements. He maintains a listing of qualified suppliers determined through an evaluation made 'by Purchasing, Engineering, Operations, and Quality Assurance.

The Ginna Station Superintendent is responsible for safe operation of Ginna Station. He is responsible for the operation, maintenance, repair, refueling, and modification of Ginna Station in accordance with the requirements of the quality assurance program. He is responsible for pro-viding qualified personnel to perform these activities in accordance'with approved drawings, specificationsi and procedures. He is also'esponsible for those items delineated in Section 6;0, Technical Specifications.

The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging,his responsi-bilities. He is responsible for the day-to-day operation of the station and implementing the policies, procedures i and directions of the Ginna Station Superintendent.

The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for assuring that activities affecting quality are prescribed and carried out in accordance with approved drawings, specifications, and"

procedures. In his day-to-day activities, he reports to the Ginna Station Assistant Superintendent. He is a member of the Plant Operations Review Committee and is responsible for the review of all plant procedures pre-sented to the Committee. He also reviews procurement documents initiated at the plant. He is responsible for the control of documents and records stored at the plant.

He co-ordinates inspection activities and assures that inspection requirements are included in approved procedures.

He coordinates the receipt inspection of incoming materials, parts, and components and the processing of material deficiency reports. He coordinates the processing of corrective action reports, and assures that corrective action is taken. He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superintendent with objective information concerning the quality of these activities.

The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which includes an engineer and a technician who coordinate inspection and record-keeping activities, respectively. Additional inspectors are assigned to this group as required by the level of work activities.

In addition to the Ginna'tation Quality Control Engineer,.

the Ginna Station Superintendent is assisted by other designated staff members in the implementation of certain quality assurance program requirements at the plant.

These staff members are assigned responsibility for test-ing, storage of material and equipment, operating and test, status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling, and modification.

IV.3 Desi n Control Design activities are performed by Rochester Gas and Ele'ctric.Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.

The Vice President and Chief Engineer is responsible for the design and control of design activities (including design interfaces) for the modification of structures,

'f systems, or components.

Design control is implemented by means of engineering procedures which include: design considerations; design review requirements; internal and external interface

I control considerations; design document review, approval distribution, control, and revision requirements; and corrective action. Design considerations include, as appropriate: physics, stress, materials, thermal, hydraulic, radiation and accident analysis; appropriate design bases, codes, standaxds and regulations; acceptance and rejection criteria; and quality assurance requirements.

Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests as ap-pxopxiate to assure the adequacy of the design.

The design of plant modifications's reviewed by an, engineer other than the one who performed the original design. This may be done by Rochester Gas and Electric design engineers or consulting engineers as required. The design also is reviewed by the Plant Operations Review Committee for acceptability for operation, maintenance, and repair.

Spare or replacement parts must at least meet the original equipment technical and quality requirements. For plant I

modifications, standard "off the shelf" commercial or previously approved materials, parts, and equipment are selected and reviewed for suitability of application by 1

the design engineer.

XV-l3

\

Design changes, j.ncluding field changes, are reviewed and approved in accordance with the same procedures as the original design. In general, design changes are reviewed and approved by the organizations 'or individuals that performed the original design, review, and approval. Where this is not practical, other responsible design organizations or individuals are designated, provided they have access to pertinent background information and are competent in the specific design area.

Design documents are collected, stored, and maintained in accordance with Section IV.l7. Design documents in-elude design criteria, analyses, specifications, drawings, design review records, and changes thereto.

The Quality Assurance Coordinator is responsible for assuring that design control procedures, whether the work is done by Rochester Gas and Electric or by other organizations, are prepared and implemented and incorporate appropriate design control practices, checks, and re-views. Design control procedures are reviewed to assure that an independent design verification is performed; The Vice President and Chief Engineer is responsible for the timely approval and updating of specifications and drawings, as well as changes or deviations thereto, IV-14

utilized for purchase or installation of materials, parts, or components. Any other design documents, specifi-cations, drawings, installation requirements, and changes thereto, are approved in the same manner.

Errors and deficiencies detected in the design process are documented as conditions adverse to quality and con-trolled in accordance with the corrective action require-ments of Section IV.16.

Design criteria and specifications, and changes thereto, are reviewed by Quality Assurance for the inclusion of quality assurance and quality control program require-ments as well as for the use of proper codes, material specifications, regulatory requirements, design bases, and quality standards. The Quality Assurance Coordinator reviews and approves any deviations from quality standards when .they occur.

Plant modifications are controlled by means of applicable quality assurance and quality control procedures. These procedures provide for the preparation, review, and.

approval of design documents, safety analyses, and plant modification procedures. Proposed plant modifications are= reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.

Procurement Document Control Procurement document control applies to the control of procurement documents for materials, parts, components, and services required to perform quality affecting activities. Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, con-tracts, specifications, and drawings.

Procurement of materials, parts, components, and services is initiated by Ginna Station or Engineering Department staff personnel. Procurement procedures require that organizations preparing procurement documents consider and include, as appropriate, the items listed in Table IV.4-1.

Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station are re-viewed for concurrence by Quality Control and approved by the Ginna Station Superintendent or his designated representative. Procurement documents initiated in Engineering are reviewed for concurrence by Quality Assurance and approved by the- Vice President and Chief Engineer or his designated representative.

Evidence of review and approval of procurement documents is recorded on the 'documents or on the attached *control IV-16

1 form. These documents are maintained in Purchasing and plant records.

After purchase requisitions, service'greements, contracts, specifications, and drawings have received the required reviews and approvals, a purchase order is issued to a qualified supplier and controlled as described in Section IV.7. Under no circumstances are purchasing requirements altered (except for quantity or pricing) during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve the original documents as described above.

Engineering review of procurement documents includes verification of appropriate classifications, technical requirements, and code application. Quality Assurance review of the above includes checks to verify that proper codes, regulatory requirements, and material specifications are invoked; that FSAR and Technical Supplement commit-ments are included; that ppropriate acceptance or rejection criteria are required; and that quality assurance require-'ents are incorporated. Quality Control reviews procure-ment documents for spare or replacement parts for adequacy IV-17

of quality requirements and to determine similarity, compatibility, and the inclusion of the quality require-ments and acceptance criteria of the original design.

Instructions, Procedures, and Drawin s Each Rochester Gas and Electric organization is re-sponsible for developing, reviewing, approving, and implementing procedures as required to implement the quality assurance program. These procedures cover activities such as document control, training of per-sonnel, and responsibilities and duties of personnel.

The Quality Assurance Coordinator is responsible for the review and approval of these procedures. Table IV.l-l provides a summary of the subject matter contained in the procedures which are used to implement the quality assurance program. Procurement documents require suppliers and contractors to have appropriate instructions, procedures, specifications, and drawings.

The Ginna Station Superintendent is responsible for pre-paring, reviewing, approving, and implementing instructions and procedures associated with operation, maintenance, repair, refueling, and modification. This includes in-structions and procedures listed in USAEC Regulatory Guide l.33 for administrative control; general plant operation; startup, operation, and shutdown of safety IV-18

related systems; correction of abnormal, offnormal, or alarm conditions; combat of emergencies and other sig-nificant events; radioactivity control; control of measuring and test equipment; chemical and radiochemical control; and fuel handling and refueling. He is'lso responsible for the issuance of appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the completion of plant modifications.

The Plant Operations Review Committee has the responsibility for reviewing procedures prior to their approval by the Ginna Station Superintendent as required by the Section 6.0, Technical Specifications.

Quality Control is responsible for reviewing plant ad-ministrative, operating, maintenance, repair, refueling, and modification procedures prior to use to assure quality assurance req'uirements are included.

The Vice President and Chief Engineer is responsible for preparing, reviewing, approving and issuing specifications, drawings, and installation requirements associated with plant modifications. These documents require those per-forming the work to obtain, understand, and comply with appropriate instructions, procedures, specifications,

and drawings. The Vice President and Chief Engineer has established procedures for maintaining drawings and I

specifications in a current status. These procedures cover updating of as-built drawings after plant modifi-cations and the revision, approval, distribution, and control of all drawings and specifications.

Quality Assurance is responsible for the review of design criteria and specifications, and changes thereto, for concurrence with quality assurance'requirements.

The Ginna I Station Quality Control Engineer is responsible for preparing and implementing plant quality control procedures. The procedures require the approval of the Quality Assurance Coordinator and the Ginna Station Superintendent.

Persons preparing and approving documents are. responsible for assuring that specifications, instructions, pro-cedures, and drawings include'ppropriate quantitative or qualitative acceptance criteria for determining that important activities have been satisfactorily accomp-lished and assuring that the documents are kept current.

Surveillance of the implementation of instructions, drawings, and procedures for operation, maintenance, XV-20

repair, modification, and refueling is the responsibility of the Ginna Station Quality Control Engineer.

Document Control Procedures are established to control the issuance of procedures, instructions, drawings, and specifications.

Standard document, control requirements are contained in the Quality Assurance Manual. The Ginna Station Superin-tendent is responsible for the control of,all documents issued at Ginna Station. Engineering is responsible for the control of all documents issued by Engineering, Quality Assurance, and Purchasing. Engineering and Operations have separa'te procedures to control documents in accordance with the requirements of the Quality Assurance Manual.

The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of document involved, its importance to safety, and the intended use of the document. It specifies the types of documents which must be controlled; identifies the difference between controlled and uncontrolled copies of the same document; includes the method for identifying holders of controlled copies; requires that only controlled copies of a document be used for official purposes; requires that lists of effective revisions be issued periodically; requires lists IV-21

of document.'olders to be maintained by the distributors; and requires that distributors transmit controlled documents using approved forms internally and externally. Types of documents which are controlled include Technical Specifications, FSAR, Technical Supplements, Quality Assurance Manual, procedures (such as, quality assurance, engineering, purchasing, repair, maintenance, test, calibration, fuel handling, modification, and administrative), specifications, drawings, and nonconformance and corrective action docu-mentation. Suppliers of materials, equipment, and services are required in procurement documents to provide for control of documents, including manufacturing inspection and test-ing instructions.

The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to insure that documents are available when required; to properly review and approve documents such as procedures, instructions, specifications, and drawings; to provide the same reviews and approvals for changes to documents as was required of the original document; to require that organizations which review and approve documents have access to pertinent information and adequate knowledge of the original document intent; to assure that approved changes are promptly transmitted for incorporation IV-22

into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.

Quality Assurance and Quality Control are responsible for review and concurrence of procurement documents and, therefore, procurement document control requirements.

Quality Assurance and Quality Control are further re-sponsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.

Control of Purchased Ma't'erial',' ui ment, and Services Procurement documents, supplier selection, supplier sur-veillance, and receipt inspection are the four major means used in controlling purchased material, equipment, components, and services. All procurement is conducted in accordance with procurement documents as stated in Section IV-4. All reviews, inspections, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier is capable of providing acceptable, quality products.

Suppliers must be on an approved suppliers'ist prior to being issued,a purchase order. Supplier evaluations are conducted by a team consisting of qualified personnel IV-23

from Quality Assurance, Engineering, Purchasing, and other interested parties or their representatives as re-quired. The depth of the supplier evaluation varies depending on the complexity and importance to safety of the item involved. For example, for mass produced or off-the-shelf items, only a check of past performance may be necessary. On the other hand, for complex, im-portant items a very thorough review is performed.

Engineering is responsible for evaluating the overall design or manufacturing capability of the supplier in-eluding his particular technical ability to produce the design, service, item, or component delineated in the procurement documents. As part of this review, the supplier's design capabilities, machinery capabili-ties, special fabrication processes, output capabilities, handling capabilities, testing facilities, service capabilities, and experience are reviewed.

Quality Assurance is responsible for evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric requirements. The review includes consideration of: company organization, quality assurance

personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices, acceptance criteria, required quality assurance records and their retention, and quality assurance requirements and controls im-posed by the supplier on his subcontractors. Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assurance requirements.

Quality Assurance and Engineering document their supplier evaluation results in reports which discuss areas in-vestigated, findings, and conclusions. Concurrence of Purchasing, Engineering, Operations, and Quality Assurance is required to place a supplier on the qualified suppliers list. One organization can remove a supplier from the list without concurrence of the others.

Quality Assurance is responsible for determining and documenting the degree of supplier surveillance (including review, inspection, or audit) required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance. The objective of supplier surveillance is to provide a sampling review of the supplier's quality assurance program implementation and of product conformance with respect, to the purchase XV-25

order requirements. For complex equipment and designs, Quality Assurance and Engineering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.

The results of the surveillance trip are documented by means of inspection sheets or trip reports which are distri-buted to the Quality Assurance Coordinator, the Vice President and Chief Engineer, the Ginna Station Quality Control Engineer, and the Ginna Station Superintendent.

When a deviation from purchase order requirements is noted, the Quality Assurance representative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work, if

.necessary.

The Ginna Station Quality Control Engineer is responsible for surveillance of site contractors to assure that they I

meet all technical and quality requirements. The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.

The Ginna Station Superintendent is responsible for re-ceiving and storing materials, parts, and components.

Upon arrival, the plant storekeeper logs the item, places a "hold" tag on the item, and notifies Quality Control that the item has arrived.

IV-26

Quality Control is responsible for receipt inspection upon delivery at the plant of material, equipment, and associated services for operation, maintenance, repair, modifications, and refueling. This inspection includes the use of written procedures or checklists to .verify that the material, equipment, and services conform to the procurement documents (if this has not been performed by source inspections) and that documentary evidence of con-formance is available at the plant prior to installation or use. Documentary evidence sufficient to identify the codes, standards, or specifications met by the purchased material, equipment, and services is retained. In the event a final source inspection is conducted prior'to the arrival at, the plant, Quality Control performs an in-spection for shipping damage or lost parts and a document check to assure that the required documentation has been reviewed and is complete. A receiving inspection checklist is completed for all items received to document, the extent of the inspection performed, including the documents checked, and the inspection results.

If the item and documentation are adequate, Quality Control labels the item as "Accepted", files the documentation and receipt inspection results, and returns the item to the station stockroom. Xf the item is nonconforming or the

documentation is incomplete, Quality Control initiates a material deficiency report which is controlled in accordance with Section IV.15.

All items issued must bear an acceptance tag and have documentation to support the acceptability of the item.

In the event the traceability is lost ox the documentation review is unsatisfactory, the item becomes nonconforming and may not'be released for use.

Identification and C'ont'rol'f Ma't'e'ri'a'1's', Parts, and Com onents The identification and control of materials, parts, and components is accomplished in accordance with written require-ments and applies to material, parts, or components in any stage of fabrication, storage, or installation. Identi-fication and control requirements are established by either an existing procedure or requirements documents which are pxepaxed during the planning stages of a project. The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports; specification of the degree of identification and 'control necessary; location and method of identification to preclude a degradation of the item's functional capability or quality; and the proper identification of materials,

parts, and components prior to release for manufacturing, shipping, construction, and installation.

The Vice President and Chief Engineer is responsible for assuring that. specifications contain appropriate requirements for the identification and control of materials, parts, or components. Suppliers are'equired to assure that all required documentation for an item is properly identified and related to the item. Each item is required to be physically identified, either by marking on the item or by tags.

Physical identification by purchase order number is used to the maximum extent. possible for rela'ting an item at any time to applicable documentation. Identification is either on the item or records traceable to the item. Where physical

~

identification is impractical, physical separation, procedural control, or other appropriate means are employed.

The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant. Procedures covering the identification and control of materials, parts, and components are prepared by Quality Control and approved by the Ginna Station Superintendent.

Xn the event that traceability is lost for a specific item, it is handled as nonconforming material and deviations

~ a

and waivers are controlled and documented in acc'ordance with Section IV.15.

Control of S ecial Proce'sses Written procedures are established to control special processes, such as welding, heat treating, and nondestructive examination to assure compliance with applicable codes, standards, and design specifications. Qualification of personnel and procedures complies with the requirements of applicable codes and standards. When special process qualification requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification requirements.

The Vice President and Chief .Engineer and the Ginna Station Superintendent are responsible for requiring suppliers, in procurement documents, to control special processes in accordance with the above requirements. Quality Assurance and Quality Control are responsible for reviewing procure-ment. documents to assure that. requirements for control of special processes are included.

Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Quality Assurance.

Special process procedures submitted by suppliers and contractors are reviewed and approved by Quality Assurance.

IV-30

The Ginna Station Maintenance Engineer is responsible for assuring that. personnel performing special processes under his cognizance are qualified and are using qualified procedures in accordance with applicable codes, specifi-cations, and standards. Quality Assurance is responsible for the qualification of welding and NDE personnel and procedures. Engineering maintains records for personnel and procedures to demonstrate that required qualifications have been obtained and are kept current.

Quality assurance and Quality Control perform surveillance, inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.

Procedures prepared for the control of plant activities include inspection requirements and hold points as re-quired by drawings, instructions, requirements docu-ments, specifications, codes, standards, or regulatory requirements. Instructions for conducting inspections are contained in Quality Control inspection procedures.

These inspection procedures and all supporting specifica-tions and drawings are provided to inspection personnel for use prior to performing the inspection. Inspection requirements and hold points are utilized to verify con-formance of activities to the

~ I documented instructions,

specifications, and drawings for accomplishing the activity.

Quality Control inspection procedures include the identifi-cation of quality characteristics to be inspected, a des-cription of the method of inspection to be used, the identification of the 'organization responsible for per-forming the inspection', the acceptance and rejection criteria, the requirements for the recording of -in-spection results, and the requirements for providing evidence of completion and certification of the in-spection activity. Inspections are performed by. Quality Control personnel who are independent of the personnel performing the work. Outside contractors are'equired by procurement documents to have 'and follow similar procedures and to use independent inspectors. In-spectors are sufficiently trained to adequately evaluate 1

the activity they are inspecting.

Quality Control personnel are responsible for performing inspections, as required, during plant operation, main-tenance, repair, refueling, and modification when the work is performed by Rochester Gas and Electric personnel.

When the work is performed by outside contractors, Quality Control is responsible for surveillance of the subcontractor s inspection activities. All inspection equipment is calibrated and controlled in accordance with Section IV.12. Calibration status is verified by inspection personnel prior to performing an inspection operation.

IV-32

In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing methods, equipment, and personnel is provided. Both inspection and process monitoring are required when" control is inadequate without both.

The Vice President and Chief Engineer is responsible for including inspection requirements in engineering specifications.

Quality Assurance is responsible for assuring that adequate inspection requirements are included in engineering specifications and for establishing the re-quirements for the inservice inspection program.

1 The Ginna Station Quality Control Engineer is responsi-4 ble for assuring that adequate inspection requirements and hold points are included in operation, maintenance, repair, refueling, and modification procedures. He is also responsible for the assignment of qualified in-spection personnel required for inspection of quality affecting activities and for coordinating the perfor-mance of and conducting the surveillance of inservice inspection.

IV-33

The program for inservice inspection of the reactor coolant system and other safety related systems is con-tained in Section 4.2, Technical Specifications.

IV.11 Test Control Whenever testing is required to demonstrate that a material, part, component, or system will perform satis-factorily in service, a test program is instituted employ-ing written and approved procedures which are in accordance with basic requirements established in Technical Specifications, drawings, instructions, procurement documents, specificationsf codes, standards, and .regulatory requirements. The test program requires the identification, control, and documentation of all tests and the preparation of written procedures required for satisfactory accomplishment of the testing.

Written test procedures and checklists include: necessary test equipment and calibration requirements; material requirements; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria; instructions for disposition of deviations; data collection requirements; and test result approval.

The Ginna Station Superintendent is responsible for the station test program, including the surveillance test program required'by Section 4.0, Technical Specifications.

IV-34

Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Con-trol, and approved by the Ginna Station Superintendent.

The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved procedures. When contractors are employed for'tests, the contractor is re-quired to perform testing in accordance with his quality assurance program requirements. All test results are required to be documented, reviewed, and approved by those responsible for performing the test.

The Vice President and Chief Engineer is responsible for assuring that required tests for modifications are re-

,quired in engineering specifications. He is further responsible for providing engineering assistance to the Ginna Station staff in the preparation of modification-related test procedures. Engineering is responsible for reviewing and approving modification-related test results.

Control of Measurin and Test E ui ment The calibration and control system for measuring and test equipment includes calibration procedures, estab-lishment of calibration frequencies, and maintenance and control requirements of measuring and test in-IV-35

struments, tools, gauges, shop standards, and nondes-tructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems,. and structures. Calibration procedures in-clude step-by-step methods for calibration and require-ments for instrument accuracy. Calibration frequency is based on required accuracy, degree of usage, stability characteristics, .manufacturer ' recommendations, ex-perience, and other conditions af fecting measurement capability.

Control of measuring and test equipment requires: a recall system assuring timely calibration of equipment; a system providing unique identification of equipment,

'traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing traceability of shop standards to nationally recognized standards (where national standards do not exist, procedures contain instructions to document. the basis for calibration) and periodic revalidation of shop standards; a system providing for records to be maintained which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration dates; and a system controlling the purchase requirements of IV-36

I new equipment to be entexed into the calibration and control system including requirements for accuracy, stability, and repeatability under normal use conditions.

In the event a measuring instrument is found out. of calibration, an investigation is conducted to determine the validity of previous measurements.

The Ginna Station Superintendent is responsible for the procedures and program required to assure control and calibration of measuring and test, equipment at Ginna Station in ac'cordance with the above requirements. In-struments specified in Section 4.1, Technical Specifications, are included in the program. Tools, gauges, and instruments necessary for maintenance, in-spection, and test are calibrated and controlled in accordance with station procedures. Measuring, test, or inspection equipment used by Quality Control is included in the program.

IV.13 Handlin , Stora e, an'd'hi in The Ginna Station Superintendent is responsible for develop.-

s ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment'delivered to or located at Ginna Station. Under normal circumstances, manufacturer's specific written IV-37

instructions and recommendations and purchase specification requirements aie invoked for cleanliness, preservation, special handling, and storage with respect to environ-mental requirements. In the absence of, or in addition to, specific manufacturer requirements, the superintendent may I

invoke additional requirements in accordance with the plant procedures.

The Vice President 'and Chief Engineer is responsible for specifying in procurement documents and in engineering specification's that written procedures be used, as ap-propriate, for the handling, shipping, storage, cleaning,

'I and preservation of materials and equipment procured for modifications. These procedures are prepared by con-

.tractors or by the station staff as appropriate. Rochester Gas and Electric procedures are reviewed and approved by Quality Control and the Ginna Station Superintendent.

In the preparation of procurement documents, plant procedures, and contractor procedures, consideration of handling, ship-ping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of manufacturing and installation prior to operational acceptance.

IV-38

Quality Assurance is responsible for review of engineering specifications and, contractor procedures to assure that

'proper handling, storing, and shipping requirements have been specified. Quality Control is responsible for sur veillance of handling, storage, and shipping activities I

by suppliers, Rochester Gas and Electric personnel, and contractors.

Ins ection, Test, ande'r'atih'tatus Equipment or systems not ready for normal service are clearly identified by'se of tags, control logs, and other suitable means to indicate the, status in a positive manner. The identification is sufficient to positively indicate the I

status of the particular equipment or system being isolated.

The Ginna Station Superintendent. is responsible for indicating the status of operating equipment or systems to be removed from service for maintenance,. repair, or modification in accordance with the approved Rochester Gas and Electric Xntra-Station Holding Rules. The Ginna Station Superintendent designates personnel who have station holding authority.

Personnel who have station holding authority are responsible for directing the status change of equipment and systems in accordance with the approved company Xntra-Station

Holding Rules. System status is indicated through the use of hold'tags and control logs.

Equipment or system inspection and test, status are indi-cated by use of test tags, labels, or work inspection and test status sheets. Written procedures control the use of hold tags, test tags, and labels. The procedures require the recording of the name of th'e person placing and removing the tag.

Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.

Fuel handling operations involving fuel assemblies or other radioactive sources are identified and controlled by the use of tags, stamps, or other suitable means.

Plant maintenance, repair, or modification of components, P

systems, or structures utilizes a work inspection or test status sheet to indicate acceptance or rejection for a particular component, system, or structure. Work I

inspection or test status sheets are prepared and maintained at a designated control location to indicate the status of work and the completion of required inspections and tests.

Quality Control monitors the status change activities V

for their compliance to approved procedures and assures I

IV-40

that inspection results"are properly logged. Quality Control also establishe the procedures for implementing the work inspection or status sheets during maintenance, repair, and modification.

Nonconformin Material's,'a'rts, and Com onents Procedures are established for the control, evaluation and disposition o f de ficient material, parts, and components.

Materials, parts, or components which do not conform to drawing or specification requirements are identified with a hold tag and reported on a material deficiency report.

Quality Control is resp nsible for issuing material deficiency reports, rec mmending disposition, initiating repair or rework," and inspecting and approving repaired or reworked items. Prior to installation or use, non-conforming items remain in a Quality Control receiving inspection area until approved disposition has been received.

After installation or use, nonconforming items are identified until approved disposition has been received.

Prior to installation r use, suppliers are notified of all nonconforming items~ and reguested to recommend dis-position. Purchasing is responsible for obtaining the recommended disposition from the supplier. Engineering is responsible for reviewing and approving supplier's recommended disposition. After installation or use, Engineering is responsible for determining and approving disposition of nonconforming. items.

i Items are repaired or reworked only in accordance with documented procedures'nd drawings, prepared and ap-proved by Engineering. Quality Control assures that approved procedures and drawings are available for use prior to the repair or rework and reinspects all re-paired or reworked items. The repair or rework must. be 1

verified as acceptable by an inspection of the affected item which is at, least equal to the original inspection method.

Items which are accepted for use with a known deficiency are fully documented with the specification requirement, justification for acceptance, and affect of such use.

All such items are approved prior to use by the Senior Vice President, Electric and Steam.

Quality Control issues monthly material deficiency re-port summaries which are reviewed and analyzed by E

Quality Assurance. Unsatisfactory trends are reported to management by means of the corrective action report.

in accordance with Section IV.16.

IV.16 Corrective Action Quality Assurance establishes the requirements for identification, review and correction of conditions adverse to quality. Conditions adverse to quality, IV-42

such as, failures, malfunctions, I

deficiencies, deviations, defective material and equipment, and nonconformances are reported on a corrective action report. Conditions adverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high

/

maintenance items, and operating procedure deficiencies.

The corrective action report identifies the condition, the cause of the condition, and the corrective action taken.

Corrective action reports may be initiated by Quality Assurance, Engineexing, Ginna .Station, or Purchasing staff personnel. Corrective'action reports initiated at Ginna Station are submitted to Quality Control for review and subsequent processing. Corrective action reports initiated by Engineering and Purchasing are reviewed and processed by Quality Assurance.

When a condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect of continuing the activity. If continuing the activity would cover up and preclude identification and coxrection of the deficiencyi continuing the-activity would increase the ext'ent of the deficiency or lead to an unsafe condition, stop work action is taken. The Ginna Station Quality Control Engineer has authority to stop work on maintenance, repair, refueling, or modification deficiencies. The Ginna Station Quality

Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.

The Plant Operations Review Committee'eviews all corrective action reports initiated at Ginna Station and recommends interim corrective action if the action does not, represent a change in configuration of the deficient item. The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating procedures.

Conditions adverse to quality which involve design deficiencies or a recommended corrective action which involves a design change are reviewed by Engineering. Engineering determines the cause of the condition and recommends corrective action to preclude repetition.

Quality Assurance reviews all corrective action reports to assure that the cause of the condition has been determined and that corrective action has been taken to preclude repetition. Quality Assurance also reviews material defi-ciency report summaries for unsatisfactory trends and initiates a corrective action report if such a trend occurs.

Completed corrective action reports are submitted to the Senior Vice President, Electric and Steam to keep him aware of significant conditions adverse to quality.

IV-44

IV.17 Qualit Assurance Records Quality Assurance is responsible for establishing the basic requirements for quality assurance record retention and maintenance. The Ginna Station Superintendent is responsible for the retention and maintenance of plant'ecords.

Records of Engineering and Quality Assurance activities are retained and maintained by Engineering.

Purchasing is responsible for maintaining Purchasing records. Each organization is responsible for preparation, review, approval, and implementation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements. The records which J I fall within quality assurance record requirements include those records required by Section 6.5, Technical Specifica-

=tions, the quality assurance program, and procurement docu-ments. All documents and records associated with the operation, maintenance, repair, refueling, and modification of structures, systems and components covered by the quality assurance program are included.

Plant records include operating logs; the results of inspections, tests, audits, and the monitoring of plant activities; drawings, specifications, procurement documents and material analyses; calibration procedures and reports; and nonforming and corrective action reports. Records of the qualification of personnel, procedures, and equipment IV-45

I for special processes and the results of reviews are maintained by Engineering.

Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity., results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record .of any nonconformances.

The requirements and responsibilities for record accessa-bility and transmittal are in accordance with document control procedures as described in Section IV.6. Require-ments and responsibilities for preparation, inspection, identification, review, storage, retrieval, maintenance, and the retention of quality assurance records are in accordance with applicable quality assurance record pro-cedures, codes, standards, and procurement documents..

Records are available to authorized personnel. Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible document control activity.

Records are stored in record storage facilities which are designed to prevent, destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept

in two separate storage locations in separate buildings which are physically isolated from each other.

Record keeping procedures provide for receiving, clas-sifying, indexing, labeling, and preparing records for storage. 'The procedures establish retention require-ments, accessability, control of obsolete record destruction, and control for issuance and return of all records.

The Ginna Station Superintendent is responsible for maintaining plant operating records as required in Section 6.5, Technical Specifications.

The Vice Pres'ident and Chief Engineer is responsible for maintaining design records, such as specifications,'rawings, design review reports, and design control documentation.

The Quality Assurance Coordinator is responsible for lI maintaining records of quality assurance activities, such as audit reports and vendor surveillance reports.

IV.18 Audits Compliance with all aspects of the quality assurance program and the effectiveness of the program is -de-termined by audits of all organizations performing IV-47

quality affecting activities. Quality Assurance is re-sponsible for conducting audits of each organization'nvolved in the quality assurance program on a planned periodic basis. Audit intervals are based on the status and safety importance of activities being performed.

Audits of Ginna Station, Engineering and Purchasing organizations are performed annually. Table IV.18-1 is a list of the activities to be audited in each of the organizations. Audit frequencies are based on the level of activity in each area. Audit schedules are established to assure that each activity is audited at least annually.

Additional audits are conducted as required by special conditions or circumstances.

Each audit requires the development of an audit plan to provide information about the audit, such as the func-tional areas to be audited, the names and assignments of those who will perform the audit, the scheduling arrangements, and the method of reporting findings and recommendations. The audits are performed in accordance with written procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.

Audit results are documented and reported to the person having supervisory responsibility in the area audited, the Senior Vice President, Electric and Steam, and the II IV-48

0 Nuclear Safety Audit and Review Board. Within a specified period of time, the person having supervisory responsibility in the area audited is required to review the audit .results, take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.

Quality Assurance is responsible for developing audit plans and audit check lists, designating and training audit personnel, and conducting audits..

Audits may be conducted by Quality Assurance engineers or other qualified personnel,,such as technical specialists from other company departments and outside consultants.

Audits of major contractors, subcontractors, and sup-pliers are conducted during the early stages of design and procurement, as required, to evaluate their quality assurance program for compliance with all aspects of the procurement documents. Audits are conducted, as re-quired, to assure that major contractors, subcontractors, and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents. During the project, additional audits are performed, as required, to assure all quality assurance program requirements are properly implemented in accordance with procurement documents.

IV-49

The Quality Assurance Coordinator will perform regular analyses of audit results to eval'uate quality trends.

Results of these analyses will be provided to management for their regular review.

IV-50

Table IV.l-l Quality Assurance. Program Procedures Subject Listing Qualit Assurance Procedures Appendix B Criteria Qualit Assurance Grou Im lementation of Qualit Assurance Pro ram The purpose of this procedure is to establish the Quality Assurance Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is estab-.

lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.

Trainin of Qualit Assurance Personnel To establish an education program for personnel whose work has an effect on the quality program. The edu-cation program described by this procedure is concerned with informing personnel of quality operations and does not include training of personnel in technical skills.

Mana ement Review of Qualit Assurance Pro ram This procedure describes how management reviews of the quality assurance program are conducted. This includes how management level audits are conducted, what reports

Table IV.1-1 (cont'd.)

Qualit Assurance Procedures (cont'd.) Appendix B Criteria are submitted-to management for review, and how manage-ment comments are incorporated into the program.

Qualit Assurance Grou Or anization and Res onsibilities This procedure describes the Quality Assurance Organ-ization and its responsibilities for establishing and executing a quality assurance program to assure that the Rochester Gas and Electric nuclear facilities are operated in conformance to 10CFR 50, Appendix B requirements.

Modification of Structures, S stems and Com onents III Covered B the Quaint Assurance Pro ram This procedure defines the method followed to perform modifications to safety related structures, systems and components.

Review of En ineerin Documents This procedure defines the requirements for Quality III Assurance review of design criteria and specifications to assure that appropriate quality requirements are included.

Table IV.l-l (cont'd.)

Qualit Assurance Procedures (cont'd.) Appendix B Criteria Procurement of Material, E ui ment, and Services Covered IV B The Qualit Assurance Pro ram This procedure describes the requirements to be met in the procurement of safety related parts, components, materials, structures, systems, and services.

Review of Purchase Re uisitions IV To define the procedure for controlling the quality of supplier and subcontractor furnished materials, com-ponents, parts, and services.

Re uirements for Su lier Qualit Assurance Programs IV This procedure establishes the requirements for the quality assurance program which must be in existance at a supplier's facility.

Re uirements for Qualit Assurance Manual and Procedures The purpose of this procedure is to establish the quality and safety related procedures which are required to implement the Rochester Gas and Electric Quality Assurance Manual. It defines the require-ments for instructions, procedures and drawings,

Table IV.l-l (cont'd.)

Qualit Assurance Procedures (cont'd.) Appendix B Criteria defines the responsibilities for preparing procedures for each involved department, establishes the inter-faces between the various sections of the several procedures manuals, and provides directions for the preparation of quality assurance procedures and instructions.

Qualit Assurance Procedures V The purpose of this procedure is to establish the requirements for Quality Assurance procedures needed to implement the Rochester Gas and Electric Quality Assurance'Manual. It defines the responsibilities for preparing the Quality Assurance procedures manual, establishes the interfaces between sections of the manual and the manuals of other departments, and provides direction for the preparation of the Quality Assurance procedures.

Review of Qualit Control, En ineerin and Pure assn Procedures The purpose of this procedure is to establish the requirements for the review and approval of all quality and safety related documents generated by the Rochester Gas and Electric Company in accordance with the requirements of the Rochester Gas and Electric Quality Assurance Manual.

Table IV.l-l (cont'd.)

Qualit Assurance Procedures (cont'd.) Appendix B Criteria Document Issuance, Control and Distribution This procedure defines the requirements for the identification, issuance, revision, distribution, and storage of all documents related to safety related structures, systems, and components controlled by the Rochester Gas and Electric Quality Assurance Manual.

Qualification of Su liers This procedure describes the requirements for quali-fying suppliers and maintaining an approved suppliers list.

Evaluation of Su lier Qualit Assurance Pro rams VII This procedure establishes the requirements for the evaluation of the quality assurance program con-trolling the operations of suppliers of safety related parts, materials, components, structures, or systems to the Rochester Gas and Electric Corporation.

Control of Purchased Material, E ui ment and Services VIII the Qualit Assurance Pro ram This procedure describes the method used to control material and services through the procurement cycle from the time of placing the order until the material is placed 'in stock or released for use or until the service contracted for has been completed.

Table IV.l-l (cont'd.)

Qualit Assurance Procedures (cont'd.) Appendix B Criteria Weldin Procedures IX The purpose of this procedure is to identify the process by which welding procedures shall be designed.

Weldin Procedure Qualification IX The purpose of this procedure is to identify the process by which welding procedures shall be qualified.

Welder Qualification IX The purpose of this procedure is to identify the process by which individual welders shall be qualified.

Nondestructive Examination Procedures IX The purpose of this procedure is to outline the program-by which nondestructive examination procedures shall be developed.

Nondestructive Examination Procedure Qualification IX The purpose of this procedure is to outline the program by which nondestructive examination (NDE) procedures shall be qualified and approved.

Table IU.1-1 (cont'd.)

Qualit Assurance Procedures {cont'd.) Appendix B Criteria Heat Treatin Procedures The purpose of this procedure is to define how heat treating procedures shall be established and implemented.

Test, Pro ram Re uirements XI This procedure defines the requirements for control of the nuclear plant test progzam. The test program shall. include, but not be limited to surveillance testing, special tests, post maintenance testing, physics testing, testing following modification or significant changes in operating procedures, and any evaluation or qualification testing required for new designs.

Material Deficienc Re ortin S stem This procedure establishes the methods for handling and control of non-conformant material and the docu-mentation of non-conformances of all safety related materials, parts, and components to meet the require-ments of the Rochester Gas and Electric Quality Assurance Manual.

Dis osition of Discre ant Material This procedure defines the categories of non-conforming or discrepant material and describes the handling and

Table IV.l-l (cont'd..)

Qualit Assurance Procedures (cont'd.) Appendix B Criteria control of each category from the time of identification until disposition is complete.

Qualit Control Deficienc Re ortin S stem XVI This procedure establishes the method required to detect, identify, analyze, review, and. correct conditions which adversely affect quality or safety and to preclude repetition of the deficiency.

Records XVII This procedure defines the requirements for the storage of all records related to safety related, structures, systems, and components controlled by Rochester Gas and Electric Quality Assurance Manual.

Performance of Qualit Assurance Audits XVIII This procedure provides the instructions for imple-mentation of audits scheduled and planned in accordance with procedure QAl802 including preparation performance, reporting, and followup.

Table IV.l-l (cont'd.)

Qualit Control Procedures Appendix B Criteria Ginna Q.A. Pro ram Im lementation This procedure establishes the guidelines for the im-plementation of the Quality Assurance Program at Ginna Station.

Trainin of Ginna Personnel To provide instructions regarding the indoctrination and training of Ginna Personnel about the Ginna Quality Assurance Program and implementing QC procedures.

Ginna Qualit Control Or anization To describe the organization responsible for imple-menting the requirements of the Quality Assurance requirements at Ginna Station.

Work Start Authorization To provide instructions which ensure that necessary preparation for plant modifications are complete prior to the start of work.

Procurement of Nuclear Materials, Parts, IV and Com onents To provide an outline for processing of orders for nuclear material, parts, and components, at Ginna

I Table IV.,l-l .(cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Station, and to assure that regulatory requirements, design bases, and other requirements necessary to ensure adequate quality are suitably included and referenced in the procurement documents.

Review, A royal, Notification, and Transmittal of IV Su lier Desi n and QA QC Re uirements To provide written instruction for outlining the steps necessary for review, approval, notification, and transmittal of supplier procedures, design .drawings, or any other requirements as specified in .the procurement documents for nuclear material; parts, or components ordered for spare parts or maintenance purposes by plant personnel.

Plant Qualit Control Procedures To describe the intent, scope, and format of the plant quality control procedures.

Procedures for Performin Routine Maintenance, Re air, or Mode xcatzon To outline procedure requirements for routine main-tenance, repair, or modification activities on safety class A and B systems, equipment, or structures.

Table IV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Plant 0 eratin Procedures To outline Quality Assurance requirements to be in-cluded in plant operating procedures which are used to direct operating, test, and refueling activities on safety Class A and B structures, systems, or equipment.

Issuance Control of Procedures Used For the 0 eration VI of the Plant This procedure establishes the method by which pro-cedures and check off lists used in the operation of the plant are to be controlled.

Document Control for Procedure Chan es VI This procedure describes the method by which procedures described in reference 2.3 to be revised shall be controlled.

Document Control at Ginna VI To define those non-procurement documents requiring control at Ginna and the method by which they shall be controlled.

Drawin Chan es at Ginna VI To define the responsibilities and to provide in-structions for ensuring that existing piping and

Table ZV.l-l .(cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria circuit. drawings are kept current and updated to always reflect the "As built" condition of the plant following modifications to systems and equipment.

Receivin Ins ection of Purchased Material VZI To define the activities and responsibilitie's necessary for properly receiving nuclear materials and in-specting them prior to acceptance for use.

Control of Purchased Material, E ui ment, and Services VIII To outline the program for control of material, equip-ment, and services purchased through contractors.

Control of Materials, Parts, and Com onents VIII To establish the system for effective control of material, parts, or components from receipt at Ginna through installation or use.

Identification and Markin of Material VZZZ To establish an outline for identification and mark-ing of material to maintain quality and traceability through the life of the material.

4

av Table IV.l-l (cont,'d.).

Qualit Control Procedures (cont'd.) Appendix B Criteria Control of Weldin IX The purpose of this procedure is to establish the pro-gram for effective control of qualified personnel and procedures pertaining to welding.

Issue, Control, and Stora e of Weld Consumables IX To provide instructions for issue, control, and storage of weld consumables.

Welding E ui ment Performance Verification IX To outline the program for periodic performance verification of equipment used on special processes.

Ins ection Activities at Ginna To establish guide lines for the activities requir-ing inspectors, source of inspectors, and qualifi-cations of inspectors.

Ins ector Qualification and Res onsibilities X To establish requirements for those designated to perform inspection activities at Ginna.

Table IV.l-l .(cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Test Procedure Re uirements XI To outline requirements for the procedures which are performed to verify the correct operability of safety related equipment or structures.

Performance of Tests XI To establish requirements for performing tests to include, but not be limited to, surveillance testing, special tests, post maintenance testing, physics testing, and testing following modification or sig-nificant changes in operating procedures.

Documentation, Evaluation and Dis osition of XI Test Results To describe the requirements for accumulating, documenting, evaluating, and dispositioning of results of all tests.

Test Personnel Re uirements XI To establish requirements for personnel designated to perform and/or assist in the conductance of tests.

Calibration and Control of Test Instruments Used For XII Calx. ration To provide guidelines for test instrument calibration and control which satisfy the requirements of the

Table IV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Quality Assurance Manual.

Calibration and Control of Maintenance Measurin XII Tools and E uz. ment To provide guidelines for calibration and control of measuring tools and equipment used by maintenance 'to perform critical maintenance measurement.

Calibration and Control of Qualit Control XII Measurin Tools To outline calibration and control instructions for inspection measuring tools used by quality control to determine the reject or accept status of parts and components.

Handlin , Stora e, and Shi in XIII To outline the plan for control of handling, storage, shipping, 'and preservation of material to prevent damage, deterioration, or loss from on-site delivery through installation.

Material Handlin E ui ment XIII To outline the requirements for ensuring that material handling equipment remains in good condition.

Table IV.l-l .(cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Work, Ins ection, Test Status Control as Related to XIV Maintenance, Re air, Modification, or Refuelin To establish work inspection or test status sheets .for indicating the inspection and test status of components and systems involved in maintenance, repair, or modification.

S stems or E ui ment 0 eratin and Test Status XIV Control Indicators To define the system for indicating the operating status of structures, systems, and components to pre-vent their inadvertent operation during maintenance, repair, modification, or test.

Control and Dis osition of Deficient Materials To outline the necessary steps for effective control and disposition of non-conforming materials, parts, and components.

Issue of Material Deficienc Re orts To establish an outline for issuing and processing Material Deficiency Reports.

Table IV.l-l '(cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Qualit Deficiencies and Corrective Action To provide instructions for identifying, reporting, and correcting conditions adverse to quality.

Control of Qualit Assurance Records at. Ginna XVII To outline the procedure for control of records and documents to be retained.

Processin of New Records XVII To detail the processing steps required of new records from their receipt in Central Records until final placement in their storage location.

Record Stora e Facilit and E ui ment XVII To provide a description of the record storage facilities and equipment requirements.

Routine Surveillance XVIII To provide instructions for Quality Control Sur-veillance of plant activities covered by the quality assurance program.

Correction of Audit Deficiencies XVIII To provide instructions to be used for correcting audit deficiencies at Ginna.

Table IV.l-l (cont'd.)

En ineerin Procedures A ppendix B Criteria En ineerin Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Engineering Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is. estab-lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.

Trainincl This procedure explains the requirements for the training of engineering personnel in the use of the Engineering Procedures Manual.

En ineerin De artment Or anization and Res onsibilities This procedure describes the Engineering Department Organization and defines its responsibilities for the design of safety related components, structures and systems.

Desi n Criteria This procedure defines the criteria to be considered in the design of modifications to a nuclear plant.

I Table IV.l-l (cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria Zt establishes the requirements for documentation and review of these criteria.

Desi n Anal sis & Calculations IZZ This procedure defines the requirements for controlling the prepaiation and documentation of design analyses and calculations.

En ineerin Drawin s ZII This procedure establishes the requirements for the preparation and revision of Engineering Drawings.

En ineerin S ecifications This procedure defines the requirement for specifi-cations and requirements documents needed to assure that all safety related structures, components, and systems are purchased, constructed, inspected and tested in accordance with applicable codes and standards and the provisions of 10CFR50, Appendix B.

The procedure establishes the content and format of the documents.

Design Control and Review This procedure defines the activities required to assure adequate control of design modifications and the requirements for design verification and review.

Table IV.l-l (cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria Purchase Re uisitions IV This procedure describes the actions required of Engineering personnel to purchase material related to quality or safety of a nuclear power plant.

En ineerin Procedures The purpose of this procedure is to establish the requirements for Engineering instructions, pro-cedures and drawings needed to implement the Rochester Gas and Electric Quality Assurance Manual.

It defines thethe responsibilities for preparing and approving Engineering procedures manual, estab-lishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the preparation of the Engineering procedures.

Fabrication and Construction S ecifications This procedure describes the requirements for documentation of the interpretation of engineering drawings and specifications into work instructions to permit plant operations to properly make modi-fications to the nuclear plant.

I' Table IV.l-l (cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria Control and Issuance of En ineering Documents VI This procedure establishes the requirements for the control and issuance of engineering drawings, specifications, requirements documents, and work in-structions. It establishes the numbering system, the control of originals, approvals, distribution, and revisions for both Rochester Gas and Electric and supplier originated, drawings.

Su lier Evaluation VII This procedure defines the requirements for the

,evaluation of a supplier's engineering and manu-facturing organization and his design and production capabilities to be performed prior to subcontracting a safety or quality related effort to a new supplier.

Review of Test Results XI The purpose of this procedure is to establish the requirements for the review and evaluation of test results to implement the requirements of Section of the Rochester Gas and Electric Quality Assurance ll Manual.

Qualit Control Deficienc Re ortin This procedure establishes the requirements for

Table XV.l-l .(cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria evaluating and answering Quality Control Deficiency Reports which are related to design deficiencies.

En ineerin Records This procedure establishes the-requirements for the storage of all Engineering Department drawings, specifications, requirements documents and supplier documents for all safety related components, structures, and systems controlled by the Rochester Gas and Electric Quality Assurance Manual.

Audit Re uirements XVZlZ The purpose of this procedure is to describe the re-sponsibilities of the Engineering Department before, during, and after an audit.

Purchasin Procedures Purchasin Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Purchasing Procedures for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is es-tablished to assure meeting the requirements of

I Table IV.l-l .(cont'd.)

Purchasin Procedures (cont'd.) Appendix B Criteria Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance. Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.

Trainin of Purchasin Personnel This procedure defines the requirements for the training of Purchasing Department personnel in the use of the Purchasing Procedures Manual.

Purchasin De artment Or anization and -Res onsibilities This procedure describes the Purchasing Department organization and its responsibilities for the pro-curement of safety related materials, components, structures, and systems:

Pre aration, Review, A royal and Issuance of Purchase Orders and Chan e Orders This procedure establishes the procedure for processing a Purchase Order upon receipt of a Purchase Requisition.

Purchasin Procedures The purpose of this procedure is to establish the requirement for purchasing instructions and

I I'

Table IV. 1-1 . (cont '. )

Purchasin Procedures (cont'd.) Appendix B Criteria procedures needed to implement the Rochester Gas and Electric Quality Assurance Manual. It defines the re-sponsibilities for preparing and approving the Pur-chasing Procedures Manual, establishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the pre-paration of the purchasing procedures.

Control and Issuance of Purchasin Procedures VI This procedure establishes the methods for the de-velopment, maintenance, control, and issuance of the Purchasing Procedures Manual.

Su lier Qualification, Surveillance, and Control VII This procedure describes the requirements for qualifying suppliers, maintaining records of approved suppliers, and evaluating their performance during the manufacturing stage to assure conformance to specification requirements. Suppliers shall be evaluated prior to issuance of a purchase order to insure that they are capable of manufacturing and delivering a product conforming to the applicable purchase specifications.

Qualified Su liers List VII This procedure describes the method to be used for the development and maintenance of the Qualified Suppliers List.

Table IV.l-l (cont'd.)

Purchasin Procedures (cont'd.) Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.

Qualit Control Deficienc Re ortin This procedure describes the actions to be taken by.

the Purchasing Department when supplier deficiencies which require corrective action are discovered.

Purchasin Records This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.

Audit Re uirements XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.

Table IV.l-l (cont'd.)

Purchasin Pro'cedures (cont'd.) Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.

Qualit Control Deficienc Re ortin This procedure describes the actions to be taken by.

the Purchasing Department when supplier deficiencies which require corrective action are discovered.

Purchasin Records XVII This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures,. and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.

Audit Re uirements XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.

TABLE IV.4-1 Procurement Document Re uirements Items to be considered for inclusion in procurement documents include:

1. Component identification.
2. Component or system safety class.

4

3. Quantitative and qualitative technical and function require-ments and acceptance/rejection criteria.
4. Applicable regulatory code and standard requirements.
5. Drawings, specifications, instructions, and procedures to be invoked on suppliers.
6. Special test and inspection requirements.
7. Submittal, approval, and retention requirements for documents l

such as special process and test procedures, quality assurance manuals, materials records, calculations and analyses.

8. Applicable 10CFR50, Appendix B quality assurance requirements, such as for document control, control of special processes, and control of sub-contractors work or services.
9. Access rights for visits and audits by Rochester Gas and Electric and their agents.
10. Interface requirements with other organizations; e.g.,

document submitt'al and review requirements between organizations.

ll. Special requirements or responsibilities for design, procedure preparation, fabrication, cleaning, testing, packaging, handling, shipping, and storing.

TABLE IV.18-1 Audit List E

~ Functional Or anization Activities Audited Engineering Indoctrination and Training Design Control Procurement Document Control Document Control Control of Special Processes Records Purchasing Indoctrination and Training Procurement Document Control Records Ginna Station Indoctrination and Training Modification Maintenance and Repair Procurement Control Document Control In-Service Inspection Surveillance Testing Storage Operations Refueling Control of Measuring and Test Equipment Health Physics and Chemistry Operator Training and Retraining Security Emergency Plan Inspection and Surveillance Records IV-78

I ROCHESTER GAS Am ELECTRIC CORPORATION GIROL STATION MANAGEHENT ORGANIZATION Chairman of the Board and Chief Executive Officer President Sr. Vice President Nuclear Safety Audit Sr. Vice President Finance 5 General Services Electric 5 Steam and Review Board Vice President Vice Pr esident Vice President Purchasino, Harketing, and I and Districts Chief Engineer Steam and Electric General Superintendent Purchasing Aqent Electric 5 Steam Operations Chief quality Assurance Coordinator Division Superintendent Design Engineers Elec. 8 Steam Production Plant Operations Superintendent Review Conmittee Ginna Station Supervision and Administration Other punctional Relationships equality Control Engineer Plant Operations Staff Figure IV. 2rl July 1, 1974

ROCHESTER GAS AND ELECTRIC CORPORATION QUALITY ASSURANCE ORGANIZATION Quality Assurance Coordinator H

I ED Quality Assurance Engineer Quality Assurance Engineer Quality Assurance Engineer Ouality Assurance Engineer Welding and NDE '~ Operations Construction Design Figure IV.2-2

ROCHESTER CAS AND ELECTRIC CORPORATION GINNA STATION ORGANIZATION Superintendent Training Coordinator Assistant Superintendent SOL Results and Tests Supervisor Operations Naintenance Nuclear Ouality Contxol Engineer Chemistry and Engineet Engineer Engineer Engineer Health Physics

>SOL Sh1ft Foreman 1/Sh1ft OL Head Control Operator l/Sh1f t Control Operator OL SOL - Sen1or Operator L1cense 1/Sh1 ft OL - Operator L1cense Aux111ary Operator 2/Sh1f t Pigutc IV. 2-3 July I, 1974

GINNA STATION EQUALITY CONTROL ORGANIZATION guality Control Engineer guality Control Engineer guality Control Technician Records .

Inspection Figure IV.2-4 July 1, 1974

ROCHESTER GAS AHD ELECTRIC CORPORATION EHGIHEERIHG DEPARTNEHT ORGANIZATION Vice President and Chief Engineer Assistant Chief Engineer Evaluation Chief Chief Chief quality Assurance Environmental Chief Chief Nuclear Engineer Electrical Engineer Nechanical Engineer Civil Engineer Coordinator Engineer Engineer Figure IV.2-5 July 1, 1974

S Rochester Gald Electric Corporation Ginna Station Review and Audits Functions NSARB PORC Purchasing Engineering Plant Review Audit Pigure IV. 2-6 July 1, 1974

8'L 0

QpgCCtJL 6 Introduction In May 28, 1974 letter from Mr. Robe the Unit States Atomic Energy Commissio asked several A. Purple, l-i(o ~

questions n the R. E. Ginna Quality Ass ance Program for Statio Operation. The informatio requested and further cia ification of the program e provided in Supplement I to the Technical Supp ment accompanying Application r a Full-Term Operat' License. Supplement IV is a revis d description of t R. E. Ginna Quality Assurance Prog am for Station 0 eration and supersedes Supplement II i its entirety. The following revisions have been made the descri ion of the program:

Section IV.2 Additions That all Quality ssurance, Quality Control, Engin-eering, and Pur a ing procedures are reviewed for adequacy at le st o ce every two years.

That the li of stru tures, systems, and components covered by he quality assurance program are based on the list 'n Section 1.2 1 of the FSAR.

h That m naaement review o the quality assurance program may b in a form other th an audit.

Tha the Nuclear Safety Audit and Review Board is re ired to review the statu and adequacy of the q ality assurance program at east once every two ears.

That the Chairman of the Nuclear Safety Audit and Review Board reports to the Chai an of the Board of Rochester Gas and Electric Cor ration on NSARB activities.

Section IV.3 Additions That spare or replacement parts meet, at least, the requirements of the original design.

Revis'on 1 August 1974

f (I

t f

II ~

That for plant modification, the design engineer selects and reviews materials, parts, and equipment for suitability of application.

That design deficiencies, are documented and controlled in accordance with Section IV.16.

That design documents are collected, stored, and main-

. tained in accordance with Section II.17 and a listing of which design documents are maintained.

I Clarification Clarified which design documents are reviewed by Quality Assurance.

Section IV.4 Additions That procurement documents for spare or replacement parts are processed in the same manner as other procurement documents.

That the review and approval of procurement documents is reflected on the document or on a control form which is attached to the procurement document.

That the documents are available for verification in Purchasing and plant records.

That Quality Control reviews procurement documents for spare and replacement parts fox similarity to the original requirements, and adequacy of quality require-ments.

Section IV.5 Clarification Clarifies which documents are reviewed by Quality Assurance.

Section IV.6 Addition Made procurement document review requirements consistent with Section IV.4.

IV-ii Revision 1 August 1974

That suppliers of materials, equipment, and services are required by procurement documents to provide control of manufacturing inspection and testing instructions.

Section IV.9 Additions Made procurement document review requirements consistent with Section IV.4.

Added Quality Control responsibilities for sur-veillance and inspection of special process activi-ties.

Section IV..10 Additions That all documentation necessary to perform an inspection is available to the inspector prior to the performance of the activity.

That Quality Control inspection procedures include the identification of quality characteristics to be inspected and a description of the method of inspection to be used, the identification 'of the organization responsible for performing the inspection, the acceptance and rejection criteria, the requirements for the recording of inspection results, and the requirements for providing evidence of completion and certification of the inspection activity. I That inspection equipment is calibrated in accor-dance with Section IV.12 and that calibration status is verified prior to performing the inspection activity.

Section IU.ll Addition That test procedures include test methods and test instrumentation definition.

IV-iii Revision 1 August l974

Section IV.12 Addition That shop standards calibration is traceable to national standards or, where national standards are not available, the basis of calibration is documented.

Section IV.14 Addition That written procedures control the use of hold tags, test tags and labels and that the procedures require the recording of the name of the person placing and removing the tag.

Section IV.15 Addition That Quality Control issues monthly material deficiency report summaries, that these summaries are reviewed and analyzed by Quality Assurance, and 'that when unsatisfactory trends are noted, they are reported to management, using the corrective action report in accordance with Section IV.16.

Section IV.17 Additions That plant records include operating logs, drawings, specifications, calibration procedures and reports, nonconformance reports, and the results of inspec-tions, tests, audits and the monitoring of plant activities and material analyses.

That quality assurance records of special process activities are maintained by Engineering and that they include the qualification records of personnel, procedures, and equipment.

That inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the, activity, and a record of any nonconformances.

IV-iv Revision 1 August 1974

Section IV.18 Addition That Quality Assurance is responsible for conducting the audits'isted in Table IV.18-1.

In July 1974, the United States Atomic Energy Commission requested information on the conformance of 'the R. E. Ginna Quality Assurance Program for Station Operation to the

-document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated Octob'er 1973 (Orange Book Revision 0). The -infor-mation requested is provided in Revision 1 to Supplement IV to the Technical Supplement accompanying Application for a Full-Term Operating License. The following changes have been made to Supplement IV:

Section IV.l Additions A description of the extent to which the quality assurance program conforms to the document. entitled "Guidance on Quality Assurance Requirements During The Operations Phase of Nuclear Power Plants",

Revision 0 dated October 1973 (Orange Book Revision 0).

On October 1, 1974, Rochester Gas and Electric Cor-poration revised its corporate'structure. This organization change has not affected the functional interrelationships between the organizations responsible for implementing the quality assurance program. In addition, the RGSE commitment to the "Orange Book" in August has necessitated some shifting of responsibilities. The changes RG&E has made are reflected in Revision 2 to Supplement IV to the Technical Supplement accompanying Application for a Full Term Operating License.

The changes affect every section of the supplement except, sections 12 6 14. Change pages are listed in Instructions 2 and each revised page is marked with revision level. In addition, the latest zevision is marked with a vertical line in the left hand margin of each page. The revision level is noted by an arabic numeral next,to each vertical line.

Revision 2 November 1, 1974

Tables and figures which have been completely revised are shown by revision level at the bottom of the page and by reference in the index, page IV-vii. Unrevised pages with a vertical solid black line in the margin reflect changes to the document between Supplement II and Supplement IV. Some editorial corrections have been made and these are also marked.

IV-vA Revision 2 November 1, 1974

TABLE OF CONTENTS Section Title Pacae QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Iv.l Quality Assurance Program IV-1 IV.2 Organization IV-5 IV.3 Design Control IV-12 IV.4 Procurement Document Control IV-16 IV.5 Instructions, Procedures, and Drawings IV-18 IV.6 Document Control IV-21 IV.7 Control of Purchased Material, Equipment 23 and Services IV. 8 Identification and Control of Materials, IV-28

~

Parts, and Components IV.9 Control of Special Processes IV-30 IV.10 Inspection IV-31 IV.11 Test Control IV-34 IV.12 Control of Measuring and Test Equipment IV-35 IV.13 EIandling, Storage, and Shipping IV-37 IV.14 Inspection, Test, and Operating Status IV-39 IV.15 Nonconforming Materials, Parts, and IV-41 Components IV.16 Corrective Action IV-42 IV.17 Quality Assurance Records IV-45 IV.18 Audits IV-47 IV-vi Revision 1 August'1974

LIST OF TABLES Table Number Title Pa<ac IV.1-1 Quality Assurance Program IV-51*

Procedures Subject Listing IV.4-1 Procurement Document Requirements IV-77**

IV.18-1 Audit List IV 78**

LIST OF FIGURES Fi ure Number Title Pacae IV.2-1 Management Organization IV-79**

IV.2-2 Quality Assurance Organization IV-80**

IV.2-3 Ginna Station Organization IV-81 IV.2-4 Quality Control Organization IV-82 IV.2-5 Engineering Department OrganizationIV-83**

dl IV.2-6 Review and Audit Functions IV-84

  • Pages IV-51 through IV-58 have been revised.

,**Table IV.4-1, Table IV.18-1, Figure IV.2-1,'igure IV.2-2 and Figure IV.2-5 have been revised.

IV-vii Revision 2 November 1, 1974

QUALITY ASSURANCE PROGRAM FOR STATION OPERATION Qualit Assurance Pro ram The quality assurance program described in this Supplement has been developed by the Rochester Gas and Electric Corpora-tion to assure safe and reliable operation of the R. E. Ginna Nuclear Power Plant. This program applies to all activities affecting the safety related functions of the structures, systems, and components that prevent or mitigate the con-sequences of postulated accidents that could cause undue risk .to the health and safety of the public. These quality affecting activities include operating, maintaining, repair-ing, refueling and modifying.

The basic Rochester Gas and Electric Corporation quality assurance policy is established by the Chairman of the Board and Chief Executive Officer in his Corporate State-ment of Quality Assurance Policy. This policy is imple-mented by the Vice President, Electric and Steam Production through the Quality Assurance Coordinator and the Ginna Station Superintendent.

The program is governed by a Ginna Station Quality Assurance Manual which contains the requirements and assignment of responsibilities for implementation of the program. The manual is. prepared, reviewed, and maintained by Quality Assurance and approved by the Vice President, Electric and Steam Production.

IV-1 Revision 2 November 1, 1974

The program is implemented through Quality Assurance, Quality Control, Engineering, and Purchasing Procedures.

These procedures are prepared and approved by the responsible organization (i.e., Quality Assurance, Opera-tions, Engineering, and Purchasing) and reviewed and concurred with by Quality Assurance. The procedures are contained in separate manuals maintained by the responsible organization. All these procedures are reviewed for adequacy at least,,once every two years by the responsible organization. Table IV.1-1 provides a listing of the subjects and a short description of the subject matter which is contained in the procedures.

Organizational interfaces are defined and controlled by sections of the Quality Assurance Manual. Organizational responsibilities are described in Section IV.2.

The quality assurance program covers all existing Seismic Category I structures, systems, and components, including their foundations and supports. Activities affecting the quality of these structures, systems, and components are controlled to an extent consistent with their importance to safety. A detailed listing of the structures, systems, IV-2 Revision 2 November 1, 1974

S. i and components covered by, the quality assurance program, based on Section 1.2.1 of the Final Facility Description and Safety Analysis Report, is contained in the Quality Assurance Manual.

Details of the system boundaries and the quality classifi-cation of water-and-steam-containing components are con-tained on system Slow drawings. The listing of structures, systems, and components covered by the quality assurance program and 'the system flow drawings are prepared and maintained by Engineering and reviewed and concurred with by Quality Assurance.

Modifications or additions to existing structures, systems, and components are designated the same seismic classifica-tion as the existing system. New structures, systems, and components are designated a seismic classification in accordance with the guidelines in USAEC Regulatory Guide 1.29.

Supervisory personnel are indoctrinated in quality assurance policies, manuals, and procedures to assure they understand that these are mandatory requirements which must be imple-mented and enforced. Personnel responsible for performing activities 'affecting quality are trained and indoctrinated in the requirements, purpose, scope, and implementation of quality related manuals and procedures. Refresher sessions IV-3 Revision 2 November 1, 1974

are held periodically and retraining is required whenever a new procedure is issued or a major revision is made to an existing procedure. Training of personnel not in the quality assurance organization is the responsibility of each department performing an activity affecting quality.

Quality Assurance assists in establishing training re-quirements and assures that personnel are trained by auditing training records.

In addition to training in quality assurance, each department conducts on-the-job training to assure that personnel are qualified for their primary work assignments.

The Ginna Station Superintendent is responsible for the formal training, qualification, licensing, and requali-fication of operators, as necessary. Where necessary, personnel are trained in radiation protection, plant safety and security.

The Nuclear Safety Audit and Review Board is required to review the status and adequacy of the quality assurance program at least once every two years to assure that it is meaningful and is effectively complying with corporate policy and 10CFR50, Appendix B. This review consists of audits or a review equivalent to an audit performed by company personnel or outside consultants. Reviews will be conducted every six months during the first two years that the program is implemented.

The quality assurance program is designed to meet the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants." The program con-forms to the following AEC Regulatory Guides and ANSI Standards:

a ~ AEC Regulatory Guide 1.8, "Personnel Selection f

and Training", and regulatory staf comments and supplementary guidance contained i'n the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book Revision 0)

b. AEC Regulatory Guide 1.28, "Quality Assurance Program Requirements (Design and Construction)",

and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement Phase of Nuclear Power Plants", Revision 1 dated May 1974 (Gray Book Revision 1)

Note: The requirements and guidelines contained in ANSI N45.2 and associated standards are applied only to Seismic Category I structures, systems, and components, including their foundations and "supports.

c ~ AEC Regulatory Guide 1.30, "Quality Assurance Requirements for 'the Installation, Inspection; and Testing of Instrumentation and Electric Equipment"

d. AEC Regulatory Guide 1.33, "Quality Assurance Program Requirements (Operation)", and regula-tory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants",

Revision 0 dated October 1973 (Orange Book Revision 0)

IV-4A Revision"1 August 1974

1

e. AEC Regulatory Guide 1.37, "Quality Assurance Requirements for Cleaning of Fluid Systems and Associated Components of Water-Cooled Nuclear Power Plants"
f. AEC Regulatory Guide 1.38, "Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Water-Cooled Nuclear Power Plants"
g. AEC Regulatory Guide 1.39, "Housekeeping Require-ments for Water-Cooled Nuclear Power Plants"
h. AEC Regulatory Guide 1.58, "Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel"
i. AEC Regulatory Guide 1.64, "Quality Assurance Requirements for the Design of Nuclear Power Plants"
j. AEC Regulatory Guide 1.74, "Quality Assurance Terms and Definitions"
k. Extracts from ANSI N45. 2. 8, "Supplementary Quality Assurance Requirements for Installation, Inspec-tion, and Testing of Mechanical Equipment and Systems for the Construction Phase of Nuclear Power Plants", contained in the document entitled "Guidance on Quality Assurance Requirements During the Operations Phase of Nuclear Power Plants", Revision 0 dated October 1973 (Orange Book - Revision 0)
l. ANSI N45.2.9, "Requirements for Collection, Storage, and Maintenance of Quality Assurance Records for Nuclear Power Plants" Note: When record storage facilities are not, designed in accordance with the requirements of ANSI N45.2.9, duplicate records are kept in two separate storage locations in separate buildings which are physically isolated from each other.
m. ANSI N45.2.12, "Requirements for Auditing of Quality Assurance Programs for Nuclear Power Plants" IV-4B Revision 2 November 1, 1974
n. ANSI N45.2.13, -"Quality Assurance Requirements for Control of Procurement of Equipment, Materials and Services for Nuclear Power Plants," and regulatory staff comments and supplementary guidance contained in the document entitled "Guidance on Quality Assurance Requirements During Design and Procurement 'Phase of Nuclear Power Plants",, Revision 1 dated May 1974 (Gray Book Revision 1)

IV-4C Revision 1 August 1974

y, IV.2 The major organizations participating in the quality assurance program are the Purchasing, Engineering, and Electric and Steam Production Departments; Quality Assurance; the Plant Operations Review Committee; and the Nuclear Safety Audit and Review Board. Figure IV.2-1 is an organizational chart showing these organizations and their relationship to the corporate organization.

Positions responsible for the principal elements of the quality assurance program are:

Chairman of the Board Vice President, Electric and Steam Production Vice President, Engineering and Construction Chief Engineer Quality Assurance Coordinator Quality Assurance Engineer, QA Programs Quality Assurance Engineer, Operations Quality Assurance Engineer, Design Quality Assurance Engineer, Welding and=Nondestructive Examination Purchasing Agent Ginna Station Superintendent Ginna Station Quality Control Engineer In addition to the above. individuals, two advisory groups are utilized to review and audit plant operations. These IV-5 Revision 2 November 1, 1974

II are the Plant 'Operations Review Committee and the Nuclear Safety Audit and Review Board. The Plant Operations Review Committee acts in an advisory capacity to the Ginna Station Superintendent and the Nuclear Safety Audit and Review Board advises the Vice President, Electric and Steam Production. The qualifications of members and the responsibilities of these organizations are described in Appendix A to Provisional Operating License No. DPR-18, Section 6.0, Technical Specifications.

The Chairman of the Board of the Rochester Gas and fl Electric Corporation directed the establishment of the quality assurance program and issued the governing policy statement. He has established the Nuclear Safety Audit and Review Board to review and audit plant operations.

The Chairman of the Nuclear Safety Audit and Review Board is responsible to the Chairman of the Board on all acti-vities of the Nuclear Safety Audit and Review Board.

The Vice President, Electric and Steam Production has

.corporate responsibility for operation of Ginna Station in accordance with applicable regulatory requirements. He is responsible for establishing the policies and require-ments necessary to assure safe and reliable operation'f Ginna Station. He is also responsible for those items XV-6 Revision 2 November 1, 1974

delineated in Section 6.0, Technical Specifications.

He has overall responsibility for and authority to direct quality affecting activities. He has assigned the responsibility for the detailed development and overall coordination of the quality assurance program to the Quality Assurance Coordinator.

The responsibility for proper implementation of the quality assurance program requirements at Ginna Station has been assigned to the Ginna Station Superintendent.

The Vice President, Engineering and Construction is responsible for the design and construction of plant I,"

modifications in accordance with applicable design bases, regulatory requirements, codes and standards. He delegates these responsibilities to the Chief Engineer.

The Chief Engineer has the responsibility for preparing drawings and specifications for the procurement of materials H

and components for plant maintenance and modification as required. He is responsible for reviewing operating and fuel handling procedures referred to him by the Ginna Station Superintendent and for reviewing maintenance and repair procedures for major equipment.

The Quality Assurance Coordinator is responsible for establishing and executing the overall quality assurance program. He is responsible for assuring that the program 2

satisfies the requirements of 10CFR50, Appendix B, IV-7 Revision 2 November 1, 1974

O.

and for keeping the total program updated. He is re-sponsible for assuring that all the planned and systematic actions necessary to provide adequate confidence that Ginna Station will operate safely and .reliably are established and followed. He provides management with objective information concerning quality, independent of the individual or group directly responsible for per-forming the specific activity. He has the authority and organizational freedom to assure all necessary quality affecting activities are performed. He is responsible for maintaining a quality assurance staff and directing its act'ivities and for establishing and implementing a comprehensive audit program.

The Quality Assurance Coordinator is a graduate engineer with at least six years of responsible experience, of which two years is in quality assurance and three years in the design or operation of nuclear or fossil fuel power plants.

The Quality Assurance Engineer, Operations 'is responsible for supervising the operational quality assurance program for Ginna Station. This includes writing quality assurance policies and procedu'r'es., coordinating supplier qualification and surveillance, and establishing and implementing the in-C service inspection program. He is responsible for staying

<'n IV-8

il current in all applicable regulatory and code quality assurance requirements and providing guidance and assistance to the Ginna Station Superintendent, the Ginna Station Quality Control Engineer, and other affected personnel on these requirements.

The Quality Assurance Engineer, Design is responsible for interpreting the requirements of 10CFR50, Appendix B and applicable regulatory and code requirements related to plant modifications and providing guidance and assistance to engineering and station personnel on these requirements.

He writes quality assurance policies and procedures related to design activities and interfaces between Engineering and other departments. He is responsible for reviewing engineering and procurement documents to assure that

~

quality assurance requirements are incorporated.

The Quality Assurance Engineer, Welding and Nondestructive v

'Examination is responsible for developing and qualifying procedures 'for special processes. He is also responsible for assuring that personnel are trained and qualified in special processes and for inspection activities in-volving nondestructive examination.

The Quality Assurance Engineer, QA Program assists the Quality Assurance Coordinator and is responsible for implementing IV-9 ~ Revision 2 November 1, 1974

the program requirements assigned to Quality Assurance.

He is responsible for the preparation and maintenance of the Quality Assurance Procedures Manual. He also prepares and maintains the quality assurance audit schedule, plans and conducts training programs, for quality assurance personnel, and reviews corrective action reports on quality assurance deficiencies.

The Purchasing Agent is responsible for the procurement of materials, services, and components, from qualified ZV-9A Revision 2 November 1, 1974

suppliers, in accordance with applicable commercial, technical, and quality requirements. He maintains a listing of qualified suppliers determined through an evaluation made by Purchasing, Engineering, Operations,,

and Quality Assurance.

The Ginna Station Superintendent is responsible for safe operation of Ginna Station. He is responsible for the operation, maintenance, repair, refueling, and modification of Ginna .Station in accordance with the requirements of the quality assurance program. He is responsible for pro-viding qualified personnel to perform these activities in accordance with approved drawings, specifications, i

and procedures. He is also responsible for those items delineated in Section 6.0, Technical Specifications.

The Ginna Station Assistant Superintendent supports the Ginna Station Superintendent in discharging his responsi-bilities. He is responsible for the day-to-day operation of the station and implementing the policies, procedures, and directions of the Ginna Station Superintendent.

The Ginna Station Quality Control Engineer is responsible to the Station Superintendent for assuring that activities affecting quality are prescribed and carried out. in accordance with approved drawings, specifications, and IV-10

procedures. In his day;to-day activities, he reports to the Ginna Station Assistant Superintendent. He is a member of the Plant Operations Review Committee and is responsible for the review of all plant procedures pre-sented to the Committee. He also reviews procurement documents initiated at the plant. He is responsible for the control of documents and records stored at the plant.

He co-ordinates inspection activities and assures that inspection requirements are included in approved procedures.

He coordinates the receipt inspection of incoming materials, parts, and components and the processing of material deficiency reports. He coordinates the processing of corrective action reports, and assures that corrective P

action is taken. He is responsible for routine surveillance of other groups involved in quality affecting activities and provides the Ginna Station Superintendent with objective information concerning the quality of these activities.

The Ginna Station Quality Control Engineer is assisted in the performance of his duties by a staff which includes an engineer and a technician who coordinate inspection and record-keeping activities, respectively. Additional inspectors are assigned to this group as required by the level of work activities.

~ k 1

'S P'

In addition to the Ginna Station Quality Control Engineer, the Ginna Station Superintendent is assisted by other designated staff members in the implementation of certain quality assurance program requirements at the plant.

These staff members are assigned responsibility for test-ing, storage of material and equipment, operating and test status control, calibration and control of measuring and test equipment not used by Quality Control, maintenance of material handling equipment, operator training, and control of all activities involving operation, maintenance, repair, refueling, and modification.

Desi n Control Design. activities are performed by Rochester Gas and Electric Corporation personnel or are subcontracted to organizations providing services to Rochester Gas and Electric.

Engineering is responsible for the design and control of

\

design activities (including design interfaces) for the modification of structures, systems, or components.

Design control is implemented by means of engineering procedures which include: design considerations, design review requirements; internal and external interface IV-12 Revision 2 November 1, 1974

control considerations; design document, review, 'approval, distribution, control, and revision requirements; and corrective action. Design considerations include, as appropriate: physics, stress, materials, thermal, hydraulic, radiation and accident analysis; appropriate design bases, codes, standards and regulations; acceptance and rejection criteria; and quality assurance requirements.

Design verification utilizes various methods such as formal design reviews, alternate calculations, or tests I

as appropriate to assure the adequacy of the design.

The design of plant modifications is reviewed by an engineer other than the one who performed the original design. This may be done by Rochester Gas and Electric design engineers or consulting engineers as required.

The design also is reviewed by Ginna Station for accept-ability for operation, maintenance, and repair.

Spare or replacement parts must at least meet the original equipment technical and quality requirements.

For plant modifications, standard "off the shelf" commercial or previously approved materials, parts, and equipment are selected and reviewed for suitability of application by tne design engineer.

Revision 2 November 1, 1974

I Design changes, including field changes, are reviewed and approved in accordance with the same procedures as the original design. In general, design changes are reviewed and approved by the organizations or individuals that performed the original design, review, and approval.

Where this is not practical, other responsible design organizations or individuals are designated, provided they have access to pertinent background information and are competent in the specific design area.

'Design documents are collected, stored, and maintained in accordance with Section IV.17. Design documents in-clude design criteria, analyses, specifications, drawings, design review records, and changes thereto.

The Quality Assurance Coordinator is responsible for assuring that design control procedures, whether the work is done by Rochester Gas, and Electric or by other organizations, are prepared and implemented and incor-V porate appropriate design control practices,'hecks, and reviews. Design control procedures are reviewed to assure that an independent verification is performed.

The Chief Engineer is responsible for the timely approval and updating of specifications and drawings, as well as changes or deviations thereto, utilized for purchase IV-14 Revision 2 November 1, 1974

A' or installation of materials, parts, or componen S ~

Any other design documents, specifications, ngs, requirements, and changes thereto, re draw'nstallation approved in the same manner.

H Errors and deficiencies detected in the design process are documented as conditions adverse to quality and con-trolled in accordance with the corrective action require-ments of Section IV. 16.

Design criteria and specifications, and changes thereto, are reviewed by Quality Assurance for the inclusion of quality assurance and quality control program requirements and the proper quality standards. The Quality Assurance Coordinator reviews and approves any deviations from quality standards when they occur. Quality Assurance also spot checks design criteria and specifications for use of proper codes, material specifications, regulatory require-ments and design bases.

Plant modifications are controlled by means of applicable quality assurance and quality control procedures. These procedures provide for the preparation, review, and approval of design documents, safety analyses, and plant modification procedures. Proposed plant modifications are tl reviewed by the Plant Operations Review Committee and Nuclear Safety Audit and Review Board as required by Section 6.0, Technical Specifications.

IV-15 Revision 2 November 1, 1974

l U

Procurement Document Control I

Procurement document control applies to the control of procurement documents for materials, parts, components,

(

and services required to perform quality affecting activities. Such documents may be prepared by Rochester Gas and Electric or by a contractor and include purchase requisitions, purchase orders, service agreements, con-tracts, specifications, and drawings.

. Procurement of materials, parts, components, and services is initiated by Ginna Station or Engineering Department staff personnel. Procurement procedures require that organizations preparing procurement docume'nts consider and include, as appropriate, the items listed in Table IV.4-1.

Procurement documents, including those requesting spare or replacement parts, initiated at Ginna Station are re-viewed for concurrence by Quality Control and approved by the Ginna Station Superintendent or his designated repre-sentative. Procurement documents initiated in Engineer-ing are reviewed for concurrence by Quality Assurance and approved by the Chief Engineer or his designated represen-tative.

Evidence of review and approval of procurement documents is recorded on the documents or on the attached control IV-16 Revision 2 November 1, 1974

J' form. These documents are maintained in Purchasing and plant records.

After purchase requisitions, service agreements, contracts, specifications, and drawings have received the required reviews an6 approvals, a purchase order is issued to a qualified supplier and controlled as described in Section IV.7. Under no circumstances are purchasing requirements altered (except for quantity or pricing) during order placement unless review and concurrence is obtained from those who were required to review, concur with, and approve

.the original documents as described above.

Engineering review of procurement documents includes verification of appropriate classifications, technical requirements, and code application. Quality Assurance review of the above includes checks to verify that proper codes, regulatory requirements, and material specifications are invoked; that FSAR and Technical Supplement commit-ments are included; that appropriate acceptance or rejection criteria are required; and that quality assurance require-ments are incorporated., Quality Control reviews procure-ment documents for spare or replacement parts for adequacy IV-17 Revision 2 November 1, 1974

of quality requirements and to determine similarity,

~

compatibility, and the inclusion of the quality require-I ments and acceptance criteria of the original design.

Instructions, Procedures, and Drawin s I'Ve5 Each Rochester Gas and Electric organization is responsible for developing, reviewing, approving, and implementing procedures as required to implement the quality assurance program. These procedures cover activities such as document control, training of personnel, and responsibilities and duties of -personnel. Quality Assurance reviews and f

concurs with these procedures. Table IV.1-1 provides a summary of the subject matter contained in the procedures which are used to implement the quality assurance program.

Procurement documents require suppliers and contractors to, have appropriate instructions, procedures, specifica-tions, and drawings.

The Ginna Station Superintendent is responsible for pre-paring, reviewing, approving, and implementing instructions and procedures associated with operation, maintenance, repair, refueling, and modification. 'This includes in-structions and procedures listed in USAEC Regulatory Guide 1.33 for administrative control; general plant operation; startup, operation, and shutdown of safety 4

IV-18 Revision 2 November 1, 1974

I r

h

related systems; correction of abnormal, of fnormal, or alarm conditions; combat of emergencies and other sig-nificant events; radioactivity control; control of measuring and test equipment; chemical and radiochemical control; and fuel handling and refueling. He is responsible for the preparation and implementation of Quality Control Procedures. He is also responsible for the issuance of appropriate changes to such documents upon receipt of regulatory directives, instructions from Rochester Gas and Electric management, or the com-pletion of plant modifications.

The Plant Operations Review Committee has the responsi-bility for reviewing procedures prior to their approval by the Ginna Station Superintendent as required by the Section 6.0, Technical Specifications.

Quality Control is responsible for reviewing plant administrative, operating, maintenance, repair, refueling, and modification procedures prior to use to assure quality assurance requirements are included.

The Chief Engineer is responsible for preparing, reviewing, approving and issuing specifications, drawings, and installation requirements associated with plant modifi-cations. These documents require those performing the work to obtain, understand, and comply with appropriate instructions, procedures, specifications and drawings.

IV-19 Revision 2 November 1, 1974

II l

'N I

The Chief Engineer has established procedures .for

)

maintaining drawings and specifications in a current status. These procedures 'cover updating of as-built drawings after plant modifications and the revision, approval, distribution, and control of all drawings and specifications.

Quality Assurance reviews design criteria and specifi-cations', and changes thereto, for concurrence with quality assurance requirements.

Station Quality Control Procedures require the review and concurrence of Quality Assurance and the approval of the Ginna Station Superintendent.

Persons preparing and approving documents are responsible for assuring that specifications, instructions, procedures, and drawings include appropriate quantitative or quali-tative acceptance criteria for determining that important activities have been satisfactorily accomplished and assuring that the documents are kept current.

Surveillance of the implementation of instructions, drawings, and procedures for operation, maintenance, repair, modification, and re'fueling is the responsibility of the Ginna Station Quality Control Engineer.

IV-20 Revision 2 November l, l974

4 Document Control Procedures are established to control the issuance of procedures, instructions, drawings, and specifications.

Standard document control requirements are contained in the Quality Assurance Manual. The Ginna Station Super-intendent is responsible for the control of all documents issued at Ginna Station. Engineering controls all docu-ments issued by Engineering, Quality Assurance, and Purchasing. Engineering and Operations have separate procedures to control documents in accordance with the requirements of the Quality Assurance Manual.

The Quality Assurance Manual requires that documents be controlled as appropriate, considering the type of docu-ment involved, its importance to safety, and'the intended use of the document. It specifies the types of documents which must, be controlled; identifies the difference between controlled and uncontrolled copies of the same document; includes the method for identifying holders of controlled copies; requires that only controlled copies of a document be used for official purposes; requires that lists of effective revisions be issued periodically; requires lists of document holders to be maintained by the distributors; and requires that distributors transmit controlled docu-ments using approved forms internally and externally.

Revision 2 November 1, 1974

Types of documents which are controlled include Tech-nical Specifications, FSAR, Technical Supplements, Quality Assurance Manual, procedures (such as, quality assurance, engineering, purchasing, repair, maintenance, test, calibration, fuel handling, modification, and administrative), specifications and drawings. Suppliers of materials, equipment, and services are required in

'rocurement documents to provide for control of documents, including manufacturing inspection and testing instructions.

The Quality Assurance Manual further requires that each organization provide in its procedures for measures: to assure that documents are available when required; to properly review and approve documents such as procedures, instructions, specifications, and drawings; to provide the same reviews and approvals for changes to documents as was required of the original document; to require that organizations which review and approve documents have to pertinent information and adequate knowledge 'ccess of the original document intent; to assure that approved changes are promptly transmitted for incorporation into documents; and to assure that obsolete or superseded documents are eliminated from the system and not used.

Quality Assurance and Quality Control are responsible for review and concurrence of procurement documents and, therefore, procurement document control requirements.

IV-22 Revision 2 November 1, 1974

Quality Assurance and Quality Control are further responsible for review, inspection, surveillance, and audit, as appropriate, of document control systems to assure adequate systems are implemented.

Control of Purchased Naterial, E ui ment, and Services Procurement documents, supplier selection, supplier 0

surveillance, and receipt inspection are the four major means used in controlling purchased material, equipment, components, and services. All procurement is conducted in accordance with procurement documents as stated in Section IV-4. All reviews, inspections, surveillances, and audits are conducted by personnel who are competent in establishing whether or not a supplier: is capable of providing acceptable, quality products.

Suppliers must be on an approved suppliers'ist prior to being issued a purchase order. Supplier evaluations are performed by Quality Assurance, Engineering, Purchasing, and/or Ginna Station, as necessary, for the item or service involved. The depth of the supplier evaluation varies depending on the complexity and importance to safety of the item involved. For example, for mass produced or off-the-shelf items, only a check of past performance may be necessary. On the other hand, for complex, important. items a very thorough review is performed.

IV-23 Revision 2 November 1, 1974

Engineering is responsible for evaluating the overall design or manufacturing capability of the supplier in-eluding his particular technical ability to produce the design, service, item, or component delineated in the procurement documents. As part of this review, the supplier's design capabilities, machinery capabil-ities, handling capabilities, testing facilities, service capabilities, and exPerience are reviewed.

Quality Assurance is responsible for evaluating the supplier's overall quality assurance organization and program in accordance with applicable codes, standards, applicable parts of 10CFR50 Appendix B, and Rochester Gas and Electric Requirements. The review includes consideration of: company organization, quality assurance personnel qualifications, review and control of design documents, manufacturing procedures, quality assurance procedures, calibration practices,,acceptance criteria, required quality assurance records and their retention, and quality assurance requirements and controls I

imposed by the supplier on his subcontractors. Supplier evaluation is conducted by means of procedures or checklists which identify applicable regulatory or code quality assurance requirements.

IV-24 Revision 2 November 1, 1974

1 Ginna Station qualifies suppliers of inspection, test, and calibration services and the suppliers of spare and replacement parts if the procurement is of the identical part from the original supplier.

2 Quality Assurance, Engineering, and Ginna Station document their supplier evaluation results in reports which discuss areas investigated, findings, and con-clusions. As 'applicable, concurrence of Purchasing, Engineering, Ginna Station, and Quality Assurance is required to place a supplier on the qualified suppliers'ist.

One organization can remove a supplier from the list without concurrence of the others.

Quality Assurance is responsible for determining and documenting the degree of supplier surveillance (including review, inspection, or audit) required during design, fabrication, inspection, testing, and shipping, and for providing the required surveillance. The objective of supplier surveillance is to provide a sampling review of the supplier's quality assurance program implementation and of'roduct conformance with respect to the purchase order requirements. For complex equipment and designs, Quality Assurance and IV-25 Revision 2 November 1, 1974

E.

h I'

Engineering are responsible for joint development of surveillance plans in advance of surveillance trips to identify areas to be reviewed.

The results of the surveillance trip are documented by means of inspection sheets or trip reports which are distributed to the Quality Assurance Coordinator, the t

Purchasing Agent, the Chief Engineer, the Ginna Station Quality Control Engineer, and the Ginna Station Superin-tendent. When a deviation from purchase order require-ments is noted, the Quality Assurance representative has the authority to inform the vendor that a particular item is unacceptable, to issue a nonconformance report, or to stop work, if necessary.

The Ginna Station Quality Control Engineer is responsible for surveillance of site contractors to assure that they meet. all technical and quality requirements. The reporting and documenting of contractor surveillance is managed in a manner similar to supplier surveillance.

The Ginna Station Superintendent, is responsible for receiving and storing materials, parts, and components.

Upon arrival, the plant storekeeper logs the item, places a "hold" tag on the item, and notifies Quality Control that the item has arrived.

IV-26 Revision 2 November 1, 1974

't Al t '\ \ ~

Quality Control is responsible for receipt inspection upon delivery at the plant of material, equipment, and associated services for operation, maintenance, repair, modifications, and refueling. This inspection includes the use of written procedures or checklists to verify that the material, equipment, and services conform to the procurement documents (if this has not been performed by source inspections) and that documentary evidence of con-formance is available at the plant prior to installation or use. Documentary evidence sufficient to identify the codes, standards, or specifications met by the purchased material, equipment, and services is retained. In the event a final source inspection is conducted prior to the arrival at the plant, Quality Control performs an in-spection for shipping damage or lost parts and a document check to assure that the required documentation has been reviewed and is complete. A receiving inspection checklist is completed for all items received to document the extent of the inspection performed, including the documents checked, h

and the inspection results.

If the item and documentation are adequate, Quality Control labels the item as "Accepted", files the documentation and, receipt inspection results, and returns the item to the station stockroom. If the item is nonconforming or the IV-27

f 4

documentation is incomplete, Quality Control initiates a material deficiency report. which is controlled in accordance with Section IV.15.

All items issued must bear an acceptance

)

tag and have documentation to support the acceptability of the item.

In the event, the traceability is lost or the documentation review is unsatisfactory, the item becomes nonconforming and may not be released for use.

Identification and Control of Materials, Parts, and Com onents The identification and control of materials, parts, and components is accomplished in accordance 'with written require-ments and applies to material, parts, or components in any stage of fabrication, storage, or installation. Identi-fication and control requirements are established by either an existing procedure or requirements documents which are prepared during the planning stages of a project. The identification and control requirements cover items such as: traceability to associated documents such as drawings, specifications, purchase orders, manufacturing test data and inspection documents, and physical and chemical mill test reports; specification of the degree of identification and control necessary; location and method of identification to preclude a degradation of the item's functional capability or quality; and the proper identification of materials, IV-28

parts, and components prior to release for manufacturing, shipping, construction, and installation.

The Chief Engineer is responsible for assuring that specifications contain appropriate requirements for the identification and control of materials, parts, or components. Suppliers are required to assur'e that all required documentation for an item is properly identified and related to the item. Each item is required to be physicall'y identified, either by marking on the item or by tags. Physical identification by purchase order number is used to the maximum extent possible for relating an item at any time to applicable documentation. Identifi-cation is either on the item or records traceable to the item. Where physical identification is impractical, physical separation, procedural control, or other appro-priate means are employed.

The Ginna Station Superintendent is responsible for main-taining identification and control of materials, parts, or components received, stored, installed, and used at the plant. Procedures covering the identification and 5

control of materials, parts, and components are prepared by Quality Control and approved by the Ginna Station Superintendent.

In the event that traceability is lost for a specific item, i;t is handled as nonconforming material and deviations IV-29 Revision 2 November 1, 1974

and waivers are controlled and documented in accordance with Section IV.15.

Control of S ecial Processes Written procedures are established to control special processes, such as welding, heat treating, and nondes-tructive examination to assure compliance with applicable codes, standards, and" design specifications. Qualifica-tion of personnel and procedures complies with the J

requirements of applicable codes and standards. When special process qualification requirements are not included in existing codes and standards, they are described in procedures which give details of the special process, the personnel qualification requirements, the equipment necessary, and the special process qualification require-

'ments.

The Chief Engineer and the Ginna Station Superintendent are responsible for requiring suppliers, in procurement.

documents, to control special processes in accordance with the above requirements. Quality Assurance and Quality Control are responsible for reviewing procurement documents to assure that requirements for control of special processes are included.

Rochester Gas and Electric procedures for special processes are prepared, reviewed, and approved by Quality Assurance.

Special process procedures submitted by suppliers and contractors are reviewed and approved by Quality Assurance.

IV-30 Revision 2 November 1, 1974

The Ginna Station Maintenance Engineer is responsible for assuring that personnel performing special processes under his cognizance are qualified and are using qualified procedures in accordance with applicable codes, specifi-cations, and standards. Quality Assurance is responsible for the qualification of welding and NDE personnel and procedures. Engineering maintains records for personnel and procedures to demonstrate that, required qualifications have been obtained and are kept current.

Quality Assurance and Quality Control perform surveillance, inspections, and audits of special processes performed by Rochester Gas and Electric or contractors to assure com-pliance with procedures.

Ins ection Procedures prepared for the control of plant activities include inspection requirements and hold points as re-quired by drawings, instructions, requirements documents, specifications, codes, standards, or regulatory require-ments. Instructions for conducting inspections are con-tained in Quality Control inspection procedures. These inspection procedures and all supporting specifications and drawings are provided to inspection personnel for use prior to performing the inspection. Inspection requirements and hold points are utilized to verify conformance of activities to the'ocumented instructions, IV-31 Revision 2 November 1, 1974

I specifications, and drawings for accomplishing the activity.

Quality Control inspection procedures include the identifi-cation of quality characteristics to be inspected, a des-cription of the method of inspection to be used, the identification of the organization responsible for per-forming the inspection, the acceptance and rejection

'criteria, the requirements for the recording of in-spection results, and the requirements for providing evidence of completion and certification of the 'in-spection activity. Inspections are performed by Quality Control personnel who are independent. of the personnel performing the work. Outside contractors are required by procurement documents to have and follow similar procedures and to use independent 'inspectors. In-spectors are sufficiently trained to adequately evaluate the activity they are inspecting.

Quality Control personnel are responsible for performing inspections, as required, during plant operation, main-tenance, repair, refueling, and modification when the work is performed by Rochester Gas and Electric personnel.

When the work is performed by'outside,contractors, Quality Control is responsible for surveillance of the subcontractor's inspection 'activities. All inspection equipment is calibrated and controlled in accordance with Section IV.12. Calibration status is verified by inspection personnel prior to performing an inspection operation.

IV-32

In the event an inspection of processed material or products is impossible or impractical, indirect control by monitoring processing'ethods, equipment, and personnel is provided. Both inspection and process monitoring are required when control is inadequate without both.

, The Chief Engineer is responsible for including inspec-tion requirements in engineering specifications.

Quality Assurance is responsible for assuring that adequate inspection requirements are included in engin-eering specifications and for establishing the require-ments for the inservice inspection program.

The Ginna Station Quality Control Engineer is resp'onsible for assuring that adequate inspection requirements and hold points are included in operation, maintenance, repair, refueling, and modification procedures. He is also responsible for the assignment of qualified inspection personnel required for inspection of quality affecting activities and for coordinating the performance of and conducting the surveillance of inservice inspection.

IV-33 Revision 2 November 1, 1974

0 The program for inservice inspection of the reactor coolant system and other safety related systems is con-tained in Section 4.2, Technical Specifications.

Test Control Whenever testing is required to demonstrate that a material, part, component, or system will perform satis-factorily in service, a test program is instituted employ-ing written and approved procedures which are in accordance with basic requirements established in Technical, Specifications, drawings, instructions, procurement documents, specifications, codes, standards, and regulatory requirements. The test program requires the identification, control, and documentation of all tests, and the preparation of written procedures required for satisfactory accomplishment of the testing.

Written test procedures and checklists include: necessary test. equipment and calibration requirements; material requirements; test personnel requirements; prerequisite plant and equipment conditions; limiting conditions; detailed performance instructions for the testing method and test equipment instrumentation; acceptance and rejection criteria; instructions for disposition of deviations; data collection requirements; and test xesult approval.

t The Ginna Station Superintendent is responsible for the station test program, including the surveillance test program required by Section 4.0, Technical Specifications.

Revision 2 IV-34 Yiovember 1, lg74

I Test procedures are prepared by the plant staff, reviewed by the Plant Operations Review Committee and Quality Control,, and approved by the Ginna Station Super-intendent. The Ginna Station Superintendent is responsible for the performance of the required tests in a correct and timely manner utilizing written and approved'procedures.

When contractors are employed for tests, the contractor is required to perform testing in accordance with his quality assurance program requirements. All test results are required to be documented, reviewed, and approved by those responsible for performing the test.

I z The Chief Engineer is responsible for assuring that required tests for modifications are required in engin-eering specifications. He is further responsible for providing engineering assistance to the Ginna Station staff in the preparation of modification-related test procedures. Engineering is responsible for reviewing and approving modification-related test results.

Control of Measurin a and Test E ui ment The calibration and control system for measurin'g and test equipment includes calibration procedures, estab-lishment of calibration frequencies, and maintenance control requirements of measuring and test in-I'nd IV-35 Revision 2 November 1, 1974

struments, tools, gauges, shop standards, and nondes-tructive test equipment which are to be used in the measurement, inspection, and monitoring of components, systems, and structures. Calibration procedures in-clude step-by-step methods for calibration and require-ments for instrument accuracy. Calibration frequency is based on required accuracy, degree of usage, stability characteristics, manufacturer's recommendations, ex-perience, and other conditions affecting measurement capability.

Control of measuring and test equipment requires: a recall system assuring timely calibration of equipment; a syst'm providing unique identification, of equipment, traceability to calibration test data, and identification of the next calibration date on the equipment; a system providing traceability of shop standards to nationally recognized standards (where national standards do not exist, procedures contain instructions to document the basis for calibration) and periodic revalidation of shop standards; a system providing for records to be maintained k

which indicate the complete status of all items under the calibration system including the maintenance, calibration results, abnormalities, and last and future calibration 4

dates; and a system controlling the purchase requirements of ZV-36

new equipment to be entered into the calibration and control system including requirements for accuracy, stability, and repeatability under normal use conditions.

In the event a measuring instrument is found out of calibration, an investigation is conducted to determine the validity of previous measurements.

The Ginna Station Superintendent is responsible for the procedures and program required to assure control and calibration'of measuring and test equipment at Ginna Station in accordance with the above requirements. In-struments specified in Section 4.1, Technical 4

Specifications, are included in the program. Tools, gauges, and instruments necessary for maintenance, in-spection, and test are calibrated and controlled in accordance with station procedures. Measuring, test, or inspection equipment used by Quality Control is included in the program.

IV.13 Handlin , Stora e, and Shi in The Ginna Station Superintendent is responsible for develop-,

ing and implementing procedures for the handling, storage, shipping, preservation, and cleaning of material and equipment delivered to or located at Ginna Station. Under normal circumstances, manufacturer's specific written IV-37

instructions and recommendations and purchase specifi-cation requirements are invoked for cleanliness, preservation, special handl'ing, and storage with respect to environmental requirements. In the absence of, or in addition to, specific manufacturer requirements, the superintendent may invoke additional requirements in accordance with the plant procedures.

The Chief Engineer is responsible for specifying in pro-curement documents and in engineering specifications that written procedures be used, as appropriate, for the handling, shipping, storage, cleaning, and preservation of materials and equipment procured for modifications.

These .procedures are prepared by contractors or by the

'station staff as appropriate. Rochester Gas and Electric'rocedures are reviewed and approved by Quality Control and the Ginna Station Superintendent.

In the preparation of procurement documents, plant procedures, and contractor procedures, consideration of handling, ship-ping, storage, cleanliness, and preservation is given to all material and equipment throughout various stages of manufacturing and installation prior to operational accept-ance.

IV-38 Revision 2 November 1, 1974

Quality Assurance is responsible for review of engineering specifications to assure that proper handling, storing, and shipping requirements have been specified. Quality Control is responsible for surveillance of handling, stor-age, and shipping activities by suppliers, Rochester Gas and Electric personnel, and contractors.

Ins ection, Test, and 0 eratin Status Equipment. or systems not ready for normal service are clearly identified by use of tags, control logs, and other suitable means to indicate the status in a positive manner.

The identification is sufficient to positively indicate the status of the particular equipment or system being isolated.

The Ginna Station Superintendent is responsible for indicating the status of operating equipment or systems to be removed from service for maintenance, repair, or modification in accordance with the approved Rochester Gas and Electric Intra-Station Holds;ng Rules. The Ginna Station Superintendent designates personnel who have station holding authority.

Personnel who have station holding authority are'esponsible for directing the status change of equipment and systems in accordance with the approved company Intra-Station IV-39 Revision 2 November 1, 1974

Holding Rules. System status is indicated through the use of hold tags and control logs.

Equipment or system inspection and test status are indi-cated by use of test tags, labels, or work inspection and test'tat'us sheets. Written procedures control the use of hold tags, test tags, and labels. The procedures require the recording of the name of the person placing and removing the tag.

Systems, components, and equipment which are found to be unacceptable during or after testing are clearly identified.

Fuel handling operations involving fuel assemblies or other radioactive sources're identified and controlled by the, use of tags, stamps, or other suitable means.

Plant maintenance, repair, or modification of components, systems, or structures utilizes a work inspection or test status sheet, to indicate acceptance or rejection for a particular component, system, or structure. Work inspection or test status sheets are prepared and maintained at a designated control location to indicate the status of work and the completion of required inspections and tests.

Quality Control monitors the status change activities for their compliance to approved procedures and assures jv-40

0 that inspection results are properly logged. Quality I

Control also establishes the procedures for implementing the work inspection= or status sheets during maintenance, repair, and modification.

Nonconformin Materials," Parts, and Com onents Procedures are established for the control, evaluation and disposition of deficient material, parts, and components.

Materials, parts, or components which do not conform to drawing or specification requirements are identified with a hold 'tag and reported on a material deficiency report.

Quality Control 'is responsible for issuing material deficiency reports, recommending disposition, .initiating repair or rework, and inspecting and approving repaired or reworked items.'rior to installation or use, non-conforming items remain in a Quality Control receiving inspection area until approved disposition has been received.

After installation or use, nonconforming items are identified until approved disposition has been received.

Prior to installation or use, suppliers are notified of all nonconforming items and requested to recommend dis-position. Purchasing is responsible for obtaining the recommended disposition from the supplier. Engineering is responsible for reviewing and approving supplier's recommended disposition. After installation or use, Engineering is responsible for determining and approving disposition of nonconforming items.

4 Items are repaired or reworked only in accordance with documented procedures and drawings prepared and approved by Engineering. Quality Control assures that and drawings are available for use prior to approved'rocedures the repaix or rework and reinspects all repaired or reworked items. The repair or rework must be verified as acceptable by an inspection of the affected item which is at least equal to the original inspection method.

Items which are accepted for use with a known deficiency are fully documented with the specification requirement, justification for acceptance, and affect of such use.

All such items are approved prior to use by the Vice President, Electric and Steam Production.

Quality Control issues monthly material deficiency report summaries which are reviewed and analyzed by Quality Assurance. Unsatisfactory trends are reported to manage-ment by means of the corrective action report in accor-dance with Section IV.16.

IV.16 Corrective Action Quality Assurance establishes the requirements for identification, review and correction of conditions adverse to quality. Conditions adverse to quality, IV-42 Revision 2 November 1, 1974

such as, failures, malfunctions, deficiencies, deviations, defective material and equipment, and nonconformances are reported on a corrective action report. Conditions adverse to quality include conditions affecting safety, conditions which could result in plant shutdown, high maintenance items, and operating procedure deficiencies.

The corrective action report identifies the condition, the cause of the condition, and the corrective action taken.

Corrective action reports may be initiated by Quality Assurance, Engineering, Ginna Station, or Purchasing staff personnel. Corrective action reports initiated't Ginna Station are submitted to Quality Control for review and subsequent processing. Corrective action reports initiated by Engineering and Purchasing are reviewed and processed by Quality Assurance.

When a condition adverse to quality at Ginna Station is identified, Quality Control evaluates the affect of continuing the activity. If continuing the activity would cover up e

or preclude identification and correction of the deficiency, continuing the activity would increase the extent of the deficiency or lead to an unsafe condition, stop work action is taken. The Ginna Station Quality Control Engineer has authority to stop work on maintenance, repair, refueling, or modification deficiencies. The Ginna Station Quality Revision 2 November 1, 1974 IV-43

Control Engineer may recommend stop work action to the Ginna Station Superintendent on operating deficiencies.

The Plant Operations Review Committee reviews all corr-ective action reports initiated at Ginna Station and h recommends interim corrective action if the action does not represent a change in configuration of the deficient item. The Committee recommends permanent corrective action for all conditions adverse to quality which involve operating 8 procedures.

Conditions, adverse to quality which involve design defici-encies or a recommended corrective action which involves a design change are reviewed by Engineering. Engineering determines the cause of the condition and recommends corrective action to preclude repetition.

Quality Assurance reviews all corrective action reports

,to assure that the cause of the condition has been deter-mined and that corrective action has been taken to preclude repetition. Quality Assurance also reviews material deficiency report summaries for unsatisfactory trends and initiates a corrective action report if s'uch

~

a trend occurs.

Completed corrective action reports are submitted to the Vice President, Electric and Steam Production to keep him aware of significant conditions adverse to quality.

IV-44 ,Revision 2 November 1, l974

~l r

0

Qualit Assurance Records Quality Assurance is responsible for establishing the basic requirements for quality assurance record retention and maintenance. The Ginna Station Superintendent is responsible for the retention and maintenance of plant records. Records of Engineering and Quality Assurance activities are retained and maintained by Engineering.

Purchasing is responsible for maintaining Purchasing records. Each organization is responsible for preparation, review, approval, and implementation of specific quality assurance record procedures for their areas of responsibility in accordance with these requirements. The records which fall within quality assurance record requirements include those records required by Section 6.5 of the Technical Speci-fications, the quality assurance program, and procurement documents. All documents and records associated with the operation, maintenance, repair, refueling, and modification of structures, systems and components covered by the quality assurance program are included.

Plant records include operating logs; the results of inspec-tions, tests, audits, and the monitoring of plant activities; drawings, specifications, procurement documents and material analyses; calibration procedures and reports; and nonforming and corrective action reports. Records of the qualification of personnel, procedures, and equipment for special processes IV-45 Revision 2 November 1, 1974

and the results of reviews are maintained by Engineering.

Inspection and test records contain a description of the type of test or inspection activity, evidence of completion of the activity, results, the name of the inspector or data recorder, the acceptance or rejection of the activity, and a record of any nonconformances.

The requirements and responsibilities for record accessa-bility and transmittal are in accordance with document control procedures as described in Section IV.6. Require-ments and responsibilities for preparation, inspection, identification, review, storage, retrieval, maintenanceg and the retention of quality assurance records are in accordance with applicable quality assurance record pro-cedures, codes,-standards, and procurement documents.

Records are available to authorized personnel. Removal from record storage is documented on sign-out cards and accountability is maintained by the responsible document control activity.

are designed to prevent destruction of records through fire, flooding, theft, and deterioration by temperature or humidity conditions; or, duplicate records are kept IV-46 Revision 2 November 1, 1974

in two separate storage locations in separate buildings which are physically isolated from each other.

Record keeping procedures provide for receiving, clas-sifying, indexing, labeling, and preparing records for storage. The procedures establish retention requirements, accessability, control of obsolete record destruction, and control for issuance and return of all records.

The Ginna Station Superintendent is responsible for maintaining plant operating records as required in Section 6.5, Technical Specifications.

Engineering is responsible for maintaining design records, such as specifications, drawings, design review reports, and design control documentation; quality assurance records, such as audit reports and vendor surveillance reports; and purchasing records, such as supplier qualifi-cations, supplier surveillance reports, bid evaluations, and purchase requi.sitions.

Audits Compliance with all aspects of the quality assurance program and the effectiveness of the program is deter-mined by audits of all organizations performing quality affecting activities. Quality Assurance is responsible for conducting audits of each organization involved in the IV-47 Revision 2 November 1, 1974

quality assurance program on a planned, periodic basis.

Audit. intervals are based on the status and safety importance of activities being performed.

Audits of Ginna Station, Engineering and Purchasing organizations are performed annually. Table XV.18-1 is a list of the activities to be audited in each of the organizations. Audit frequencies are based on the level of activity in each area. Audit schedules are established to assure that each activity is audited at least annually.

Additional audits are conducted as required by special conditions or circumstances.

Each audit requires the development of an audit plan to provide information about, the audit, such as the functional area's -to be audited, the names and assignments of those who will perform the audit," the scheduling arrangements, and the method of reporting findings and recommendations.

The audits are performed in accordance with written pro-cedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.

Audit results are documented and reported to the person having supervisory responsibility in the area audited, the a Vice President, Electric and Steam Production, and the IV-48 Revision 2 November 1, 1974

Nuclear Safety Audit, and Review Board. Within a specified period of time, the person having supervisory 'responsibility in the area audited is required to review the audit results, take necessary action to correct the deficiencies revealed by the audit, and document and report the corrective action.

Quality Assurance is responsible for developing audit plans and audit checklists, designating and training audit personnel, and conducting audits.

Audits may be conducted by Quality Assurance engineers or other qualified .personnel, such as technical specialists from other company departments and outside consultants.=

Audits of major contractors, subcontractors, and sup-pliers are conducted during the early stages of design and procurement, as required, to evaluate their quality assurance program'or compliance with all aspects of the procurement documents. Audits are conducted, as re-quired, to assure that major contractors, subcontractorsg and suppliers are auditing their suppliers'uality assurance programs in accordance with procurement documents; During the project, additional audits are performed, as required, to assure all quality assurance program requirements are properly implemented in accordance with procurement. documents.

XV-49 Revision 2 November 1, 1974

a Quality Assurance performs regular analyses of audit results to evaluate quality trends. Results of these analyses will be provided to management for their regular review'.

IV-50 Revision 2 November 1, 1974

Table IV.l-l Quality Assurance Program Procedures Subject Listing Qualit Assurance Procedures Appendix B Criteria Indoctrination of Qualit Assurance and Su ervzsor Personnel The purpose of this procedure is to provide the instruc-tions for indoctrination of Quality Assurance and super-visory personnel in quality assurance policies, manuals, and procedures.

Trainin .of Qualit Assurance Grou Personnel H

The purpose of this procedure is to provide the instruc-I tions for training of the Quality Assurance Group in quality assurance policies, manuals, and procedures.

Mana ement Review of Qualit Assurance Pro ram This procedure describes how management reviews of the quality assurance program are conducted. This includes how management level audits are conducted, what reports are submitted to management for review, and how manage-ment comments are incorporated into the program.

ax Periodic Review of Qualit Assurance Procedures 0 8 e r. This procedure provides the instructions necessary for the periodic review of Rochester Gas and Electric 8 o Corporation Quality Assurance Procedures.

Table IV.l-l (cont'd)

Qualit Assurance Procedures (cont'd) Appendix B Criteria Qualit Assurance Grou Or anization and Res onsibilities The purpose of this procedure is to describe the Rochester Gas and Electric quality assurance organization and the responsibilities within the organization.

Qualit Assurance Review of Rochester Gas and Electric Desi n Criteria e

The purpose of this procedure is to provide the instruc-tions necessary for quality assurance review of Rochester Gas and Electric design criteria.

H I

Vl Qualit Assurance Review of Rochester Gas and Electric tV En sneer>.n S eca.fxcatzons-The purpose of this procedure is to provide the instruc-tions necessary for quality assurance review of Rochester Gas and Electric engineering specifications.

Qualit Assurance Review of Architect En ineer's Desi n Documents This procedure provides instructions for quality assurance R X o 6 review of design criteria, specifications, and related

~

documents prepared by an architect engineer. This review is performed when design criteria and/or specifications are s o submitted for Rochester Gas and Electric review and comment as a result of a procurement document requirements.

I I

/

Table IV. 1-1 (cont ')

Qualit Assurance Procedures (cont'd) Appendix B Criteria Re uisitionin Qualit Assurance Services IV This procedure describes the requirements to be met in the preparation, review and approval of purchase requisitions for services procured by Quality Assurance.

Qualit Assurance Review of Rochester Gas and Electric IV Procurement Documents The purpose of this procedure is to provide instructions for quality assurance review of Rochester Gas and Electric procurement documents and release of Purchase Requisitions H and Nuclear Procurement Control Forms (QA-07) prepared by I

other departments..

Pre aration, Review and A royal of Rochester Gas and IV Electric Q.A. S ecifications The purpose of this procedure is to establish the methods required for preparation, review, approval, issuance, and revision of Rochester Gas and Electric Quality Assurance Specifications.

Quality Assurance specifications establish the Quality Assurance program requirements imposed;on suppliers of 0 8 'safety related equipment, and services.

8 V 8 0

Table IV.l-l (cont'd)

Qualit Assurance Procedures (cont'd) Appendix B Criteria F

Pre aration, Review and A roval of Ginna Station Qualit Assurance Manual The purpose of this procedure is to provide the instruc-tions necessary for the preparation, review and approval, of changes to the Ginna Station Quality Assurance Manual.

Pre aration, Review and A royal of Qualit Assurance Procedures This procedure provides the instructions for preparation, review and approval of the Rochester Gas and Electric Corporation Quality Assurance Procedures.

. Review of Qualit Control, Qualit Assurance, En ineerin VI and Purchasxn Procedures The purpose of this procedure is to establish the require-ments for the review and approval of all quality and safety related documents generated by the Rochester Gas and Electric Company in accordance with the requirements of the RG&E Quality Assurance Manual.

Pre aration, Review and A royal of Procedure Deviation VI Re uests b Qualit Assurance This procedure provides the instructions for preparing, reviewing and approving a deviation from an approved Quality Assurance Procedure for (1) a specified period r rv

Table IV.l-l (cont'd)

Qualit Assurance Procedures'(cont'd) Appendix B Criteria time or activity, or (2) in advance of the formal release of a revision to the subject procedure, or -of a new pro-cedure which would eliminate the need for such a deviation.

Qualification of Su liers VII This procedure describes the requirements for evaluation and qualification of supplier by Quality Assurance.

Su lier Surveillance VII H This procedure establishes the requirements for the evalua-tion of the quality assurance program:controlling the I

Vl Vl operations of suppliers of safety related part's, materials, components, structures or systems to the Rochester Gas &

Electric Corporation.

J Qualit Assurance Review of Architect En ineer's Bid VII Selection This procedure provides the basis and requirements for Quality Assurance Review of the Architect Engineer's Bid Selection.

Qualit Assurance Review of Architect En ineer's Bidders VII w4 0 8 List I r. procedure provides the requirement for quality assurance 4'his review and approval of the Architect Engineer's Bidders List.

'able IV.l-l (cont'd)

Qualit Assurance Procedures (cont'd) Appendix B Criteria Weldin Procedures IX The purpose of this procedure is to identify the process by which welding procedures shall be designed.

Weldin Procedure Qualification IX The purpose of this procedure is to identify the process by which welding procedures shall be qualified.

Welder Qualification The purpose of this procedure is to identify the process by which individual welders shall be qualified.

Nondestructive Examination Procedures IX d

The purpose of this procedure is to outline the program by which nondestructive examination procedures shall be developed.

Nondestructive Examination Procedure Qualification IX The purpose of 'this procedure is to outline the program by which nondestructive examination (NDE) procedures shall be qualified and approved.

Heat Treatin Procedures IX The purpose of this procedure is to define how heat treating procedures shall be established and implemented.

Table IV.l-l (cont'd)

Qualit Assurance Procedures (cont'd) Appendix B Criteria Qualit Assurance Review and Anal sis of Material Deficienc Re ort Summary.es The purpose of this procedure is to provide the instruc-tion necessary to implement the process for the review and analysis of Material Deficiency Report Summaries.

Pre aration, Review and Processin of R.G.&E. Corrective

.Action Re orts b Qualit Assurance The purpose of this procedure is to provide the instruc-H tion necessary to implement the methods for preparation, review, and processing of RGGE Corrective Action Reports by I

quality assurance.

Qualification of Auditin Personnel XVIII This procedure describes the requirements for qualification of auditing personnel.

Audit Schedulin and Plannin XVIII This procedure describes the methods for scheduling and planning internal and external audits.

o 8 Performance of Qualit Assurance Audits XVIII This procedure describes the methods for conducting the 8 0 pre-audit conference, performing the audit and conducting the post-audit conference.

Table IV. 1-1 (cont ')

Qualit Assurance Procedures (cont'd) Appendix B Criteria Re ortin and Follow-U of Audit Findin s XVIII This procedure describes the methods for reporting audit findings, following-up on audit reports and filing audit records.

Conduct of Qualit Assurance Durin and in the Follow-u XVIII of USAEC and Mana ement Audits This procedure provides .the instructions for audit prepara-tion, audit performance and correction of nonconformances found by the auditors.

4X 0 9 m r-8 0 r ro

N Table IV. l-l (cont'. )

Qualit Control Procedures Appendix B Criteria Ginna Q.A. Pro ram Im lementation This procedure establishes the guidelines for the im-plementation of the Quality Assurance Program at Ginna Station.

Trainin of Ginna Personnel To provide instructions regarding the indoctrination and training of Ginna Personnel about the Ginna Quality Assurance Program and implementing QC procedures.

Ginna Qualit Control Or anization To describe the organization responsible for imple-menting the requirements of the Quality Assurance requirements at Ginna Station.

Work Start Authorization To provide instructions which ensure that necessary preparation for plant modifications are complete prior to the start of work.

Procurement of Nuclear Materials, Parts, IV and Com onents To provide an outline for processing of orders for nuclear material, parts, and components, at Ginna

4 j

'I I

I

Table lV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Station, and to assure that regulatory requirements, design bases, and other requirements necessary to ensure adequate quality are suitably included and referenced in the procurement documents.

Review, A royal, Notification, and Transmittal of IV Su lier Des' and QA/QC Re uirements To provide written instruction for outlining the steps necessary for review, approval, notification, and transmittal of supplier procedures, design drawings, or any other requirements as specified in the procurement documents for nuclear material, parts, or components ordered for spare parts or maintenance purposes by plant personnel.

Plant Qualit Control Procedures To describe the intent, scope, and format of the plant quality control procedures.

Procedures for Performin Routine Maintenance, Re air, or Mo a. icatxon.

To outline procedure requirements for routine main-tenance, repair, or modification activities on safety class A and B systems, equipment, or structures..

Table IV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Plant 0 eratin Procedures To outline Quality Assurance requirements to be in-cluded in plant operating procedures which are used to direct operating, test, and refueling activities on safety Class A and B structures, systems-, or equipment.

Issuance Control of Procedures Used For the 0 eration VI of 'the Plant This procedure establishes the method by which pro-cedures and check off lists used in the operation of the plant are to be controlled.

Document Control for Procedure Chan es VI This procedure describes the method by which procedures described in reference 2.3 to be revised shall be controlled.

Document Control at Ginna VI To define those non-procurement documents requiring control at Ginna and the method by which they shall be controlled.

Drawin Chan es at Ginna VI To define the responsibilities and to provide in-structions for ensuring that existing piping and

Table IV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria circuit drawings are kept current and updated to always reflect the "As built" condition of the plant following modifications to systems and equipment.

Receivin Ins ection of Purchased Material VII To define the activities and responsibilities necessary for properly receiving nuclear materials and in-specting them prior to acceptance for use.

Control of Purchased Material, E ui ment, and Services VIII To outline the program for control of material, equip-ment, and services purchased through contractors.

Control of Materials, Parts, and Com onents VIII To establish the system for effective control of material, parts, or components from receipt at Ginna through installation or use.

Identification and Markin of Material VIII To establish an outline for identification and mark-ing of material to maintain quality and traceability through the life of the material.

Table IV. 1-1 (cont'd. )

Qualit Control Procedures (cont'd.) Appendix B Criteria Control of Weldin IX The purpose of this procedure is to establish the pro-gram for effective control-of qualified personnel and procedures pertaining to welding.

Issue, Control, and Stora e of Weld Consumables To provide instructions for issue, control, and storage of weld consumables.

Weldin E ui ment Performance Verification IX To outline the program for periodic performance verification of equipment used on special processes.

Ins ection Activities at Ginna To establish guide lines for the activities requir-ing inspectors, source of inspectors, and qualifi-cations of inspectors.

Ins ector Qualification and Res onsibilities To establish requirements for those designated to perform inspection activities at Ginna.

Table IV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix 8 Criteria Test Procedure Re uirements XI To outline requirements for the procedures which are performed to verify the correct operability of safety related equipment or structures.

Performance of Tests XI To establish requirements for performing tests to include, but not be limited to, surveillance testing, special tests, post maintenance testing, physics testing, and testing following modification or sig-nificant changes in operating procedures.

Documentation, Evaluation and Dis osition of XI Test Resu ts To describe the requirements for accumulating, documenting, evaluating, and dispositioning of results of 1

all tests.

Test Personnel Re uirements XI To establish requirements for personnel designated to perform and/or assist in the conductance of tests.

Calibration and Control of Test Instruments Used For XII Calx ration To provide guidelines for test instrument calibration and control which satisfy the requirements of the

f,a' Table IV. l-l (cont'd. )

Qualit Control Procedures (cont'd.) Appendix B Criteria

'III

.Quality Assurance Manual.,

Calibration and Control of Maintenance Measurin XII Tools and E ux ment To provide guidelines for calibration and control of measuring tools and equipment used by maintenance to perform critical maintenance measurement.

Calibration and Control of Qualit Control XII Measure.n Tools To outline calibration and control instructions for inspection measuring tools used by quality control to determine the reject or accept status of parts and components.

Handlin , Stora e, and Shi in To outline the plan for control of handling, storage, shipping, and preservation of material to prevent damage, deterioration, or loss from on-site delivery through installation.

Material Handlin E ui ment XIII To outline the requirements for ensuring that material handling equipment remains in good condition.

Table IU.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Work, Ins ection, Test Status Control as Related to XIU Maintenance, Re air, Modification, or Refuelin To establish work inspection or test status sheets for indicating the inspection and test status of components and systems involved in maintenance, repair, or modification.

S stems or E ui ment 0 eratin and Test Status XIU Control Indicators To"define the system for indicating the operating status of structures, systems, and components to pre-vent their inadvertent operation during maintenance, repair, modification, or test.

Control and Dis osition of Deficient Materials To-outline the necessary steps for effective control and disposition of non-conforming materials, parts, and components.

Issue of Material Deficienc Re orts To establish an outline for issuing and processing Material Deficiency Reports.

I Table IV.l-l (cont'd.)

Qualit Control Procedures (cont'd.) Appendix B Criteria Qualit Deficiencies and Corrective Action To provide instructions for identifying, reporting, and correcting conditions adverse to quality.

Control of Qualit Assurance Records at, Ginna XVII To outline the procedure for control of records and documents to be retained.

Processin of New Records XVII To detail the processing steps required of new records from their receipt in Central Records until final placement in their storage location.

Record Stora e Facilit and E ui ment XVII To provide a description of the record storage facilities and equipment requirements.

Routine Surveillance XVIII To provide instructions for Quality Control Sur-veillance of plant activities covered by the quality assurance program.

Correction of Audit Deficiencies XVIII To provide instructions to be used for correcting audit deficiencies at Ginna.

d Table IV.l-l (cont'd.)

En ineerin Procedures A ppendix B Criteria En ineerin Im lementation. of the Qualit Pro ram The purpose of this procedure is to establish the Engineering Procedures Manual for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is estab-lished to assure meeting the requirements of Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.

~rainincr This procedure explains the requirements for the training of engineering personnel in the use of the Engineering Procedures Manual.

En ineerin De artment Or anization and Res onsibilities This procedure describes the Engineering Department Organization and defines its responsibilities for the design of safety related components, structures and systems.

Desi n Criteria This procedure defines the criteria to be considered in the design of modifications to a nuclear plant.

Table IV.l-l (cont'd..)

En ineerin Procedures (cont'd.) Appendix B Criteria It establishes the requirements for documentation and review of these criteria..

Desi n Anal sis 6 Calculations This procedure defines the requirements for controlling the preparation and documentation of design analyses and calculations.

En ineerin Drawin s This procedure establishes the requirements for the preparation and revision of Engineering Drawings.

En ineerin S ecifications This procedure defines the requirement for specifi-cations and requirements documents needed to assure that all safety related structures, components, and systems are purchased, constructed, inspected and tested in accordance with applicable codes and standards and the provisions of- 10CPR50, Appendix B.

The procedure establishes the content and format of the documents.

Design Control and Review This procedure defines the activities required to assure adequate control of design modifications and the requirements for design verification and review.

0 0

Table IV.l-l (cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria Purchase Re uisitions IV This procedure describes the actions required of Engineering personnel to purchase material related to quality or safety of a nuclear power plant.

En ineerin Procedures The purpose of this procedure is to establish the

-requirements for Engineering instructions, pro-cedures and drawings needed to implement the Rochester Gas and Electric Quality Assurance Manual.

It defines the responsibilities for preparing and approving the Engineering procedures manual, estab-lishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the preparation of the Engineering procedures.

Fabrication and Construction S ecifications V This procedure describes the requirements for documentation of the interpretation of engineering drawings and specifications into work instructions to permit plant operations to properly make modi-fications to the nuclear plant.

0 0

Table =IU.l-l (cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria Control and. Issuance of En ineering Documents UI This procedure establishes the requirements for the control and issuance of engineering drawings, specifications, requirements documents, and work in-structions. It establishes the numbering system, the control of originals, approvals, distribution, and revisions for both Rochester Gas and Electric and supplier originated drawings.

Su lier Evaluation VII This procedure defines the requirements for the evaluation of a supplier's engineering and manu-facturing organization and his design and production capabilities to be. performed prior to subcontracting a safety or quality related effort to a new supplier.

Review of Test Results XI The purpose of this procedure is to establish the requirements for the review and evaluation of test results to implement the requirements of Section of the Rochester Gas and Electric Quality Assurance ll Manual.

Qualit Control Deficienc Re ortin XVI This procedure establishes the requirements for

0 Table IV.l-l (cont'd.)

En ineerin Procedures (cont'd.) Appendix B Criteria evaluating and answering Quality Control Deficiency Reports which are related to design deficiencies.

En ineerin Records XVII This procedure establishes the requirements for the storage of all Engineering Department drawings, specifications, requirements documents and supplier documents for all safety related components, structures, and systems controlled by the Rochester Gas and Electric Quality Assurance Manual.

Audit Re uirements XVIII The purpose of this procedure is to describe the re-sponsibilities of the Engineering Department before, during, and after an audit.

Purchasin Procedures Purchasin Im lementation of the Qualit Pro ram The purpose of this procedure is to establish the Purchasing Procedures for the Rochester Gas and Electric Company to assure safe and reliable operation of a nuclear plant. The manual is es-tablished to assure meeting the requirements of

Table IV.l-l (cont'd.)

Purchasin Procedures (cont'd.) Appendix B Criteria Title 10 of the Code of Federal Regulations, Part 50, Appendix B, "Quality Assurance Criteria for Nuclear Power Plants" and the requirements of the Rochester Gas and Electric Quality Assurance Manual.

Trainin of Purchasin Personnel This procedure defines the requirements for the training of Purchasing Department personnel in the use of the Purchasing Procedures Manual.

Purchasin De artment Or anization and Res onsibilities This procedure describes the Purchasing Department organization and its responsibilities for the pro-curement of safety related materials, components, structures, and systems.

Pre aration, Review, A royal and Issuance of IV Purchase Orders and Chan e Orders This procedure establishes the procedure for processing a Purchase Order upon receipt of a Purchase Requisition.

Purchasin Procedures The purpose of this procedure is to establish the requirement for purchasing instructions and

C Table IV.l-l (cont'd.)

Purchasin Procedures (cont'd.) Appendix B Criteria procedures needed to implement the Rochester Gas and Electric Quality Assurance Manual. It defines the re-sponsibilities for preparing and approving the Pur-chasing Procedures Manual, establishes the interfaces between sections of the manual and the manuals of other departments and provides direction for the pre-paration of the purchasing procedures.

Control and Issuance of Purchasin Procedures VI This procedure establishes the methods for the de-velopment, maintenance, control, and issuance of the Purchasing Procedures Manual.

Su lier Qualification, Surveillance, and Control VII This procedure describes the requirements for qualifying suppliers, maintaining records of approved suppliers, and evaluating their performance during

- the manufacturing stage to assure conformance to specification requirements.- Suppliers shall be evaluated prior to issuance-of a purchase order to insure that they are capable of manufacturing and delivering a product conforming to the applicable purchase specifications.

Qualified Su liers List VII This procedure describes the method to be used for .the development and maintenance of the Qualified Suppliers List.

0 Table IV.l-l (cont'd.)

Purchasin Procedures (cont'd.) Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to~be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.

Qualit Control Deficienc Re ortin This procedure describes the actions to, be taken by the Purchasing Department when supplier deficiencies which require corrective action are discovered.

Purchasin Records XVII This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.

Audit Re uirements XVIII The purpose of this procedure is to describe the responsibilities of the Purchasing Department during an internal audit.

T

~'

Table IV.l-l (cont'd.)

Purchasin Procedures (cont'd.) Appendix B Criteria Material Deficienc Re orts This procedure describes the actions to be taken by the Purchasing Department in processing Material Deficiency Reports which affect supplier material.

Qualit Control Deficienc Re ortin This. procedure describes the actions to be taken by the Purchasing Department when supplier deficiencies which require corrective action are discovered.

Purchasin Records XVII This procedure establishes the requirements for the storage of all Purchasing Department records for safety related components, structures, and systems as controlled by the Rochester Gas and Electric Quality Assurance Manual.

Audit Re uirements XVIII The purpose of this procedure is to describe the .

responsibilities of the Purchasing Department during an internal audit.

TABLE IV.4-1 Procurement Document Re uirements Items to be considered for inclusion in procurement documents include:

1. Detailed statement o f the work to be per formed.
2. Complete identification of the goods or services to be provided.
3. Identification of the safety class of the item.
4. Quantitative and qualitative technical and functional require-ments and acceptance criteria.
5. Applicable regulatory codes and standards.
6. Identification of applicable drawings, specifications, instruc-tions, and procedures.
7. Identification of all test and inspection requirements.
8. Listing of documentation required to be submitted.
9. Retention and submittal requirements of supplier quality assurance records, such as special process and test procedures, materials records, calculations and analyses.
10. Applicable portions of 10CFR50, Appendix B, special quality assurance program requirements, and requirements for supplier

'rocurement documentation.

ll. Access rights for visits and/or audits.

12. Witness and hold point requirements.
13. Interfaces between RGGE and supplier organizations.
14. Identification of special requirements or responsibilities for design, fabrication, cleaning, identification, erecting, packaging, handling, shipping and storage (including extended field storage).
15. Requirements for reporting and approving disposition of noncon-formances.
16. Requirements for control of special processes.
17. Requirement for the supplier to provide a list of his exceptions to the specification.
18. Control of measuring and test equipment.

IV-77 Revision 2 November 1, 1974

0 0

'TABLE IV.18-1 Audit List

\

Functional Or anization Activities Audited Engineering Indoctrination and Training Control 'esign Procurement Document Control Document Control Control of Special Processes Records Procurement Control Purchasing Indoctrination and Training Procurement Document Control Records Procurement Control Ginna Station Indoctrination and Training Modification Maintenance and Repair Procurement Control Document Control In-Service Inspection Surveillance Testing Handling, Storage, and Shipping Operations Refueling Control of Measuring and Test Equipment Health Physics and Chemistry Operator Training and Retraining Security Emergency Plan Inspection and Surveillance Records Revision 2 November 1, 1974 IV-78

i 8

i

ROCHESTER GAS C ELECTRIC CORP.

GIMME STATION MSNAGKMENT ORGLN SATION I CIIAIRMANOF TIIE i)CARD PRESIDENT EXECUTIVE V. P.

Y. P. MARI)ETING H

PURCNASING, PUBLIC INFORMATION DISTRICTS V. P. ENC. t CONST. r Y P ELECTRIG AND STEAM PRODUCTION I

1 I I DIV. SUPT. El ECTRIC PURCNASINC ACENT Cll)Ef'NCINEER AND STEAM PRODUCTION I

I I

I I SUPT. GINIIA STATION I

ASST. CIIIEf'NG. ASST. CIIIEF DESIGN AND CONST. ENG.

I I

I ASSISTANT SU)rf, DESIGN AND CONST. RECORDS AND GENERAL Q. A.

DRAI'TING MAINTENANCE 0 8 PLANT OPERATION S V. QUALffVCONTROL STAFF

'g O'.U)

S 0 Supervielon and Adminlatration Other Funetlonal Relationah)pa FIGURE IV.2-1 NOVEMBER 1 r 1974

ROCHESTER GAS AND ELECTRIC CORPORATION QUALITY ASSURANCE ORGANIZATION Quality Assurance Coordinator Quality Assurance Engineer Quality Assurance Engineer Quality Assurance Engineer Quality Assurance Engineer Quality Assurance Engineer Welding and NDT Operations Q.A. Progran Construction Design RA 0 8 Figure IV. 2-2 November 1, 1974

ROCHESTER GAS AND ELECTRIC CORPORATION GINNA STATION ORGANIZATION Superintendent Training Coordinator Assistant Superintendent Supervisor SOL Results and Tests Chemistry and Operations Maintenance Nuclear quality Control Engineer Engineer Engineer Engineer Engineer Health Physics aSOL Shift Foreman 1/Shift OL Head Control Operator 1/Shift Control Operator OL SOL - Senior Operator License f

1/Shi t OL - Operator License Auxiliary Operator 2/Shift Figurc IV. 2-3 July 1, 1974

0 GINNA STATION OUALITY CONTROL ORGANIZATION equality Control Engineer equality Control Engineer equality Control Technician Inspecti'on Records Figure IV.2-4 July 1, 1974

Rochester Gas and Electric Corporation Engineer ing Deparbnent Or ganixation Chief Engineer Assistant Chief Engineer Assistant Chief Engineer- Administration, Maintenance, Engineering and Construction Quality Assurance, Drafting, Environmental Civil Mechanical Nuclear Electrical Ginna Project General Quality 1

Engineering Engineering Drafting Assurance Records Engineering Engineering Manager Maintenance 4J Figure IV.2 5 November I, 1974 0 8 8 i" Q

g S 0

0 Rochester O.and Gas Electric Corporation Ginna Station Review and Audits Functions NSARB QA PORC Purchasing Engineering plant Review 1'inure IV. 2-6 July 1, 1974

Q yI

'I l