IR 05000327/2008006: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{Adams|number = ML082250098}} | {{Adams | ||
| number = ML082250098 | |||
| issue date = 08/11/2008 | |||
| title = IR 05000327-08-006, 05000328-08-006; 06/09 - 13/2008 and 06/23 - 27/2008; Sequoyah Nuclear Plant, Units 1 & 2; Triennial Fire Protection Inspection | |||
| author name = Nease R | |||
| author affiliation = NRC/RGN-II/DRS/EB2 | |||
| addressee name = Campbell W | |||
| addressee affiliation = Tennessee Valley Authority | |||
| docket = 05000327, 05000328 | |||
| license number = DPR-077, DPR-079 | |||
| contact person = | |||
| document report number = IR-08-006 | |||
| document type = Inspection Report, Letter | |||
| page count = 33 | |||
}} | |||
{{IR-Nav| site = 05000327 | year = 2008 | report number = 006 }} | {{IR-Nav| site = 05000327 | year = 2008 | report number = 006 }} | ||
=Text= | =Text= | ||
{{#Wiki_filter: | {{#Wiki_filter:UNITED STATES NUCLEAR REGULATORY COMMISSION gust 11, 2008 | ||
==SUBJECT:== | |||
SEQUOYAH NUCLEAR PLANT - NRC TRIENNIAL FIRE PROTECTION INSPECTION REPORT 05000327/2008006 AND 05000328/2008006 | |||
SUBJECT: | |||
==Dear Mr. Campbell:== | ==Dear Mr. Campbell:== | ||
On June 27, 2008, the U. S. Nuclear Regulatory Commission (NRC) completed an inspection at your Sequoyah Nuclear Plant, Units 1 and 2. The enclosed report documents the inspection results, which were discussed on June 27, 2008, with Mr. T. Cleary and other members of your staff. Subsequently, additional in-office reviews were conducted and the final inspection results were discussed by telephone with Mr. T. Cleary and other members of your staff on August 8, 2008. | On June 27, 2008, the U. S. Nuclear Regulatory Commission (NRC) completed an inspection at your Sequoyah Nuclear Plant, Units 1 and 2. The enclosed report documents the inspection results, which were discussed on June 27, 2008, with Mr. T. Cleary and other members of your staff. Subsequently, additional in-office reviews were conducted and the final inspection results were discussed by telephone with Mr. T. Cleary and other members of your staff on August 8, 2008. | ||
The inspection examined activities conducted under your license as they relate to safety and compliance with the | The inspection examined activities conducted under your license as they relate to safety and compliance with the Commissions rules and regulations and with the conditions of your license. | ||
The inspectors reviewed selected procedures and records, observed activities, and interviewed personnel. | |||
This report documents two NRC-identified findings of very low safety significance (Green) which were determined to involve violations of NRC requirements. However, because of the very low safety significance and because they were entered into your corrective action program, the NRC is treating the findings as non-cited violations (NCV) consistent with Section VI.A.1 of the NRC Enforcement Policy. If you contest an NCV in this report, you should provide a response within 30 days of the date of this inspection report, with the basis for your denial, to the Nuclear Regulatory Commission, ATTN.: Document Control Desk, Washington DC 20555-0001; with copies to the Regional Administrator Region II; the Director, Office of Enforcement, United States Nuclear Regulatory Commission, Washington, DC 20555-0001; and the NRC Resident Inspector at the Sequoyah Nuclear Plant. | This report documents two NRC-identified findings of very low safety significance (Green) which were determined to involve violations of NRC requirements. However, because of the very low safety significance and because they were entered into your corrective action program, the NRC is treating the findings as non-cited violations (NCV) consistent with Section VI.A.1 of the NRC Enforcement Policy. If you contest an NCV in this report, you should provide a response within 30 days of the date of this inspection report, with the basis for your denial, to the Nuclear Regulatory Commission, ATTN.: Document Control Desk, Washington DC 20555-0001; with copies to the Regional Administrator Region II; the Director, Office of Enforcement, United States Nuclear Regulatory Commission, Washington, DC 20555-0001; and the NRC Resident Inspector at the Sequoyah Nuclear Plant. | ||
TVA | TVA 2 In accordance with 10 CFR 2.390 of the NRC's "Rules of Practice," a copy of this letter, its enclosure, and your response (if any) will be available electronically for public inspection in the NRC Public Document Room or from the Publically Available Records (PARS) component of NRC s document system (ADAMS). ADAMS is accessible from the NRC Website at http://www.nrc.gov/reading-rm/adams.html (the Public Electronic Reading Room). | ||
Sincerely,/RA/ | Sincerely, | ||
/RA/ | |||
Rebecca L. Nease, Chief Engineering Branch 2 Division of Reactor Safety Docket Nos.: 50-327, 50-328 License Nos.: DPR-77, DPR-79 | |||
===Enclosure:=== | ===Enclosure:=== | ||
Inspection Report 05000327/2008006 and 05000328/2008006 | Inspection Report 05000327/2008006 and 05000328/2008006 w/Attachment: Supplemental Information | ||
== | REGION II== | ||
Docket No.: 50-327, 50-328 License No.: DPR-77, DPR-79 Report No.: 05000327/2008006 and 05000328/2008006 Licensee: Tennessee Valley Authority (TVA) | |||
Facility: Sequoyah Nuclear Plant Location: Sequoyah Access Road Soddy-Daisy, TN, 37379 Dates: June 9 - 13, 2008 (Week 1) | |||
June 23 - 27, 2008 (Week 2) | |||
Inspectors: P. Fillion, Senior Reactor Inspector (Lead Inspector) | |||
F. McCreesh, Fire Protection Engineer (Consultant) | |||
N. Staples, Reactor Inspector R. Rodriguez, Senior Reactor Inspector Accompanying J. Montgomery, Co-Op Student Approved by: Rebecca Nease, Chief Engineering Branch 2 Division of Reactor Safety Enclosure | |||
=SUMMARY OF FINDINGS= | |||
IR 05000327/2008006, 05000328/2008006; 06/09 - 13/2008 and 06/23 - 27/2008; Sequoyah | |||
Nuclear Plant, Units 1 & 2; Triennial Fire Protection Inspection. | |||
This report covers an announced two-week triennial fire protection inspection by a team of three regional inspectors and one contract inspector. Two Green non-cited violations (NCV) were identified. The significance of most findings is indicated by their color (Green, White, Yellow, Red) using Inspection Manual Chapter (IMC) 0609, | This report covers an announced two-week triennial fire protection inspection by a team of three regional inspectors and one contract inspector. Two Green non-cited violations (NCV) were identified. The significance of most findings is indicated by their color (Green, White, Yellow, | ||
Red) using Inspection Manual Chapter (IMC) 0609, Significance Determination Process (SDP). Findings for which the SDP does not apply may be Green or be assigned a severity level after NRC management review. The NRC's program for overseeing the safe operation of commercial nuclear power reactors is described in NUREG-1649, Reactor Oversight Process, | |||
Revision 4, dated December 2006. | |||
=== | ===NRC-Identified and Self-Revealing Findings=== | ||
===Cornerstone: Mitigating Systems=== | ===Cornerstone: Mitigating Systems=== | ||
Green: A Green NCV of Unit 2 License Condition 13, Fire Protection, was | Green: A Green NCV of Unit 2 License Condition 13, Fire Protection, was identified since fire detectors in the Unit 2 480 Volt shutdown board room 2B2 were not installed according to the applicable National Fire Protection Association code. Specifically, two detectors were located near forced ventilation fresh air inlets. The licensee entered this issue into their corrective action program and promptly posted a continuous fire watch in the fire area. | ||
This finding is a performance deficiency because the licensee did not properly locate the smoke detector or the heating, ventilating and air conditioning (HVAC)system supply air inlet registers to adequately comply with the applicable industry code of record for the facility. As a result two of the four smoke detectors would not be effective in detecting fires. The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. Considering the degree of system degradation, the length of time the problem existed, the calculated fire frequency for the fire area and shutdown systems independent of the fire area the finding was of very low safety significance. | |||
Green: | Green: A green NCV of Unit 1 License Condition 16 and Unit 2 License Condition 13, Fire Protection, was identified for failure to install the automatic suppression system (sprinkler system) in the cable spreading room according to the applicable National Fire Protection Association standard with regard to the ceiling to sprinkler head dimension. As a result, the fusible link type sprinkler heads may be significantly slower than originally intended after fire ignition. The licensee entered this problem into their corrective action program. | ||
This finding is a performance deficiency because the licensee did not locate the sprinkler heads according to the applicable industry code of record for the facility. | |||
The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. | |||
fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. The finding was determined to be of very low safety significance when the likelihood of fires, the transients that could be initiated by fires and the probability of failure of mitigating systems for those transients were evaluated. | fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. The finding was determined to be of very low safety significance when the likelihood of fires, the transients that could be initiated by fires and the probability of failure of mitigating systems for those transients were evaluated. | ||
===Licensee Identified Violations=== | |||
None | |||
=REPORT DETAILS= | =REPORT DETAILS= | ||
==REACTOR SAFETY== | ==REACTOR SAFETY== | ||
Cornerstones: Initiating Events, Mitigating Systems, Barrier Integrity 1R05 Fire Protection | Cornerstones: Initiating Events, Mitigating Systems, Barrier Integrity | ||
{{a|1R05}} | |||
==1R05 Fire Protection== | |||
This report presents the results of a triennial fire protection inspection conducted in accordance with NRC Inspection Procedure (IP) 71111.05T, Fire Protection (Triennial). | |||
The objective of the inspection was to review the Sequoyah Nuclear Plant Units 1 and 2 fire protection program (FPP). The team selected three fire areas (FAs) for detailed review to examine the | The objective of the inspection was to review the Sequoyah Nuclear Plant Units 1 and 2 fire protection program (FPP). The team selected three fire areas (FAs) for detailed review to examine the licensees implementation of the FPP. The three FAs chosen for review were selected based on available risk information as analyzed onsite by a Senior Reactor Analyst from Region II, data obtained in plant walkdowns regarding potential ignition sources, location and characteristics of combustibles and location of equipment needed to achieve and maintain safe shutdown (SSD) of the reactor. Other considerations for selecting the FAs were the relative complexity of the post-fire SSD procedure, information contained in FPP documents, and results of prior NRC triennial fire protection inspections. Section 71111.05-05 of the IP specifies a minimum sample size of three fire areas. Detailed inspection of these three fire areas fulfills the procedure completion criteria. The three areas chosen were: | ||
Dual unit cable spreading room, identified as room number 706.0-C2, part of Fire | Dual unit cable spreading room, identified as room number 706.0-C2, part of Fire Area FAC-017. Alternate shutdown type compliance was used for this FA. This room has smoke detectors and sprinklers. | ||
480 V board room 2B, identified as room number 749.0-A15, Fire Area FAA-107. | 480 V board room 2B, identified as room number 749.0-A15, Fire Area FAA-107. | ||
10 CFR 50, Appendix R, III.G.2 type compliance was used for this area. This | 10 CFR 50, Appendix R, III.G.2 type compliance was used for this area. This room has smoke detection and sprinklers and contains motor control centers, inverters, battery chargers. | ||
Fire Area FAA-029 in auxiliary building, includes one large room and 11 smaller rooms and compartments. This area contains much safety-related equipment. | |||
10 CFR 50, Appendix R, III.G.2 type compliance was used for this area. The area has smoke detection and sprinklers. | |||
For each FA selected, the inspection team evaluated the licensees FPP against the applicable NRC requirements. The documents reviewed by the team are listed in the | |||
. | |||
===.01 SSD Analysis and Protection of SSD Capabilities=== | ===.01 SSD Analysis and Protection of SSD Capabilities=== | ||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team reviewed those portions of the Fire Protection Report (FPR) dealing with the SSD analysis. One objective of this review was to evaluate the completeness and depth of the analysis which determined the strategy for accomplishing the various system functions necessary to achieve and maintain hot shutdown, accomplish long term | The team reviewed those portions of the Fire Protection Report (FPR) dealing with the SSD analysis. One objective of this review was to evaluate the completeness and depth of the analysis which determined the strategy for accomplishing the various system functions necessary to achieve and maintain hot shutdown, accomplish long term cooldown and achieve cold shutdown following a severe fire. Particular attention was paid to reactor coolant system inventory control, reactivity control and steam generator inventory control. A secondary objective of reviewing the SSD analysis was to understand its details so it could be determined whether the operations post-fire shutdown procedure was consistent with the analysis. | ||
Through a combination of design information review and in-plant inspection, the team ascertained whether the fire protection features in place to protect the SSD capability satisfy the requirements of Appendix R, Section III.G. | Through a combination of design information review and in-plant inspection, the team ascertained whether the fire protection features in place to protect the SSD capability satisfy the requirements of Appendix R, Section III.G. | ||
Line 86: | Line 122: | ||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team performed in-plant observations of systems, reviewed design documents, and reviewed applicable National Fire Protection Association (NFPA) codes and standards, to assess the material condition and operational lineup of fire detection and suppression systems. The appropriateness of detection and suppression methods for the category of fire hazards in the various areas was reviewed | The team performed in-plant observations of systems, reviewed design documents, and reviewed applicable National Fire Protection Association (NFPA) codes and standards, to assess the material condition and operational lineup of fire detection and suppression systems. The appropriateness of detection and suppression methods for the category of fire hazards in the various areas was reviewed. | ||
The team reviewed the fire detection surveillance instructions as well as the most recently completed surveillance tests for each of the three selected FAs. The criteria applied to this portion of the inspection was that each detector has the capability to detect smoke and actuate a signal at its respective local fire alarm control panel as well as in the main control room. | |||
The team reviewed the fire brigade staging and dress-out areas to assess the operational readiness of fire fighting and smoke control equipment. The fire brigade personal protective equipment and the self-contained breathing apparatuses were reviewed for adequacy and functionality. The team also reviewed operator and fire brigade staffing, fire brigade response, fire brigade qualification training, and the fire brigade drill program procedures. Two fire brigade response-to-drill scenarios that transpired over the last six months were reviewed. The team reviewed the pre-fire plans for the selected areas to verify that these plans were consistent with industry practice. | |||
The team reviewed selected fire protection water delivery and supply system components required for manual fire fighting and/or water-based fixed automatic fire suppression systems to verify that the components would not be damaged or inhibited from fire-induced failures of electrical power supplies or control circuits. The team reviewed the fire hazards analysis to verify that the availability of the fire pumps was evaluated for the selected fire areas. The team reviewed the hydraulic calculations for the yard main underground piping loop supply system (plant hydraulic base model) and the hydraulic calculation for the 480 V board room 2B. The review included the checking of various nodes, elevations and pipe lengths to assure that the calculations were performed in a technically acceptable manner. | The team reviewed selected fire protection water delivery and supply system components required for manual fire fighting and/or water-based fixed automatic fire suppression systems to verify that the components would not be damaged or inhibited from fire-induced failures of electrical power supplies or control circuits. The team reviewed the fire hazards analysis to verify that the availability of the fire pumps was evaluated for the selected fire areas. The team reviewed the hydraulic calculations for the yard main underground piping loop supply system (plant hydraulic base model) and the hydraulic calculation for the 480 V board room 2B. The review included the checking of various nodes, elevations and pipe lengths to assure that the calculations were performed in a technically acceptable manner. | ||
====b. Findings==== | ====b. Findings==== | ||
(1) Layout of Sprinkler System in the FAA-029 | : (1) Layout of Sprinkler System in the FAA-029 The team observed a number of water suppression sprinkler heads in the eastern portion of the Auxiliary Building Elev. 690 (Room 690.0-A1, Fire Area FAA-029) that were located approximately six feet below the ceiling. These sprinkler heads are part of an NFPA 13 preaction sprinkler system which requires that the sprinkler heads in this area be no more than 12 inches below the ceiling. The sprinkler system in this area would not be effective in a response to a fire since the time delay to fuse any particular sprinkler head could be significant due to the location of the sprinkler heads. This portion of the sprinkler system does not meet the requirements of NFPA 13 and the licensee could not produce an evaluation or analysis that demonstrated the capability of this system to adequately control a potential fire in this area. However, the licensee claimed that the installation had been previously approved by the NRC; therefore, considered the system non-degraded. They did, however, initiate a Problem Evaluation Report (PER) to evaluate the condition. In order to determine all the facts concerning the licensing basis of the system and to review the potential acceptability of the as-built system with its code deviation an URI was established: URI 05000327, 328/2008006-02, Sprinkler System in Room 690.0-A1 of the Auxiliary Building has NFPA Code Deviation. | ||
: (2) Smoke Detectors Located Near HVAC Supply Air Inlets | |||
=====Introduction:===== | =====Introduction:===== | ||
Line 99: | Line 138: | ||
=====Description:===== | =====Description:===== | ||
The 480V Shutdown Boardroom 2B2 on elevation 734 | The 480V Shutdown Boardroom 2B2 on elevation 734 of the Auxiliary Building (Room 734.0-A18, Fire Area FAA-082) contains four smoke detectors, which would be sufficient to meet the spacing requirements of NFPA 72E, 1974, Automatic Fire Detectors. However, two of the detectors were placed in proximity to the air inlet supply stream of the heating ventilating, and air conditioning (HVAC) system for this room, which would interfere with their ability to detect and respond to smoke from a fire in the room. The Team observed that the flow of air emanating from the air inlets was of sufficient velocity and volume to divert any smoke away from the detector. This determination was based on the fact that hanging conduit tags near the detectors could be observed briskly swaying in the air stream. The NFPA code governing automatic fire detectors specifically addresses the issue. Section 4-5.1.5 of NFPA 72E, 1974, Automatic Fire Detectors, states in part that where forced ventilation is present, detectors shall not be mounted near fresh air inlets. In response to this finding, the licensee initiated PER 147263. This PER recognized that operability of the fire detection system in the room was affected and that a functional evaluation should be performed and completed by July 14, 2008. In the interim, a continuous fire watch was posted in the 480 V shutdown board room. The team verified that the fire watch was in place. The team considered the continuous fire watch to be an adequate temporary compensatory measure to approximate the intended defense in depth until the automatic detection system could be made code compliant. | ||
In response to this finding, the licensee initiated PER 147263. This PER recognized that operability of the fire detection system in the room was affected and that a functional evaluation should be performed and completed by July 14, 2008. In the interim, a continuous fire watch was posted in the 480 V shutdown board room. The team verified that the fire watch was in place. The team considered the continuous fire watch to be an adequate temporary compensatory measure to approximate the intended defense in depth until the automatic detection system could be made code compliant. | |||
=====Analysis:===== | =====Analysis:===== | ||
This finding is a performance deficiency because the licensee did not properly locate the smoke detection or the HVAC supply air inlet registers to adequately comply with their NFPA detection code of record. As a result two of the four smoke detectors would not be effective in detecting fires. The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. | This finding is a performance deficiency because the licensee did not properly locate the smoke detection or the HVAC supply air inlet registers to adequately comply with their NFPA detection code of record. As a result two of the four smoke detectors would not be effective in detecting fires. The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. | ||
The risk significance of the finding was determined using Manual Chapter (MC) 0609, Appendix F, Fire Protection Significance Determination Process. Pursuant to MC 0609, Appendix F, the degradation category was | The risk significance of the finding was determined using Manual Chapter (MC) 0609, Appendix F, Fire Protection Significance Determination Process. Pursuant to MC 0609, Appendix F, the degradation category was fixed fire protection and the degradation rating was moderate. The duration factor was equal to one. Ignition sources in the fire area were general electrical cabinets consisting of load centers and motor control centers. There were 33 sections of these cabinets. Through on-site examination of the fire area it was determined that only one train of SSD equipment and cables existed in the room. Therefore one train of SSD equipment remained unaffected by the fire. Using this data, the finding screened to very low safety significance, Green, at Task 2.4.4 of MC 0609, Appendix F. | ||
=====Enforcement:===== | =====Enforcement:===== | ||
Unit 2 License Condition 13, Fire Protection, 10 CFR 50.48 states: | Unit 2 License Condition 13, Fire Protection, 10 CFR 50.48 states: | ||
TVA shall implement and maintain in effect all provisions of the approved fire protection program referenced in the Sequoyah Nuclear Plants Final Safety Evaluation Report and as approved in NRC Safety Evaluation Reports contained in NUREG-0011, Supplements 1, 2 and 5, NUREG-1232, Volume 2, NRC letters dated May 29 and October 6, 1986, and the Safety Evaluation issued on August 12, 1997, for License Amendment No. 218, subject to the following provision: TVA may make changes to the approved fire protection program without prior approval of the Commission only if those changes would not adversely affect the ability to achieve and maintain safe shutdown in the event of a fire. | |||
The Sequoyah FPR, Part VI, Section 3.3, states that NFPA 72E, 1974, Automatic Fire Detectors was used to evaluate the adequacy of existing fire protection features against code requirements. | |||
Contrary to the above, the installed configuration of the smoke detectors in the 480V Shutdown Boardroom 2B2 on elevation 734 of the Auxiliary Building did not meet the requirements of NFPA 72E, 1974, in that two detectors were located near forced ventilation fresh air inlets. This problem existed for many years. Because this degradation of the approved fire detection system is of very low safety significance and has been entered into the licensees corrective action program as PER 147263, this violation is being treated as an NCV, consistent with Section VI.A of the NRC Enforcement Policy. It is identified as NCV 05000328/2008006-01, Fire Detectors in 480 Shutdown Board Room 2B2 Not Installed According to NFPA Code. | |||
===.04 Protection from Damage from Fire Suppression Activities=== | ===.04 Protection from Damage from Fire Suppression Activities=== | ||
Line 119: | Line 161: | ||
No findings of significance were identified. | No findings of significance were identified. | ||
===.05 Methodology and Operational Implementation for Shutdown from the Main Control Room and Alternate Shutdown | ===.05 Methodology and Operational Implementation for Shutdown from the Main Control Room=== | ||
and Alternate Shutdown | |||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team reviewed the current version of the Sequoyah Nuclear Plant FPR to determine the systems and components credited for SSD in the three FAs selected, as well as those systems and components potentially affected by a fire in the FA. System piping & instrumentation and electrical one-line diagrams were also reviewed to check the accuracy of the FPR in identifying components and power sources. For a severe fire in the cable spreading room located in the control building, the FPR indicated that the main control room would be abandoned and SSD would be controlled from the auxiliary control room located in the auxiliary building. Therefore, the team reviewed electrical schematics to confirm that circuits which interconnected devices in the main control room and the auxiliary control room contained isolation/transfer switches to allow isolation of potentially fire damaged portions of the circuits. The team reviewed the program and its implementation for testing the isolation/transfer switches. | The team reviewed the current version of the Sequoyah Nuclear Plant FPR to determine the systems and components credited for SSD in the three FAs selected, as well as those systems and components potentially affected by a fire in the FA. System piping & | ||
instrumentation and electrical one-line diagrams were also reviewed to check the accuracy of the FPR in identifying components and power sources. For a severe fire in the cable spreading room located in the control building, the FPR indicated that the main control room would be abandoned and SSD would be controlled from the auxiliary control room located in the auxiliary building. Therefore, the team reviewed electrical schematics to confirm that circuits which interconnected devices in the main control room and the auxiliary control room contained isolation/transfer switches to allow isolation of potentially fire damaged portions of the circuits. The team reviewed the program and its implementation for testing the isolation/transfer switches. | |||
The team reviewed the operational implementation of the SSD strategy described in the FPR. The FPR strategy was compared to the SSD procedures. Each step in the SSD procedures was evaluated to determine the likelihood of successful completion using the guidance in Section 11(B) of IP 71111.05T. This evaluation included a walkthrough of each procedure step. In cases where the FPR specified that a particular operator action | The team reviewed the operational implementation of the SSD strategy described in the FPR. The FPR strategy was compared to the SSD procedures. Each step in the SSD procedures was evaluated to determine the likelihood of successful completion using the guidance in Section 11(B) of IP 71111.05T. This evaluation included a walkthrough of each procedure step. In cases where the FPR specified that a particular operator action should take place within a definite time period following detection of a fire, the team measured the time in simulated walkthroughs of those procedure steps. | ||
The team inspected and evaluated the readiness of the operations staff to perform the SSD. This was done through a review of shift manning logs for a sample of days in the past two years, review of completed job performance measures, verification of protective gear availability and direct observation of operators ability to locate the components involved in local, outside the control room, procedural actions. | |||
====b. Findings==== | ====b. Findings==== | ||
Line 132: | Line 179: | ||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
For each of the three selected FAs, the team reviewed selected SSD components, including a number of valves, instruments, and pumps, which the licensee credited for post-fire SSD. This review evaluated whether the circuit analysis properly categorized the selected components | For each of the three selected FAs, the team reviewed selected SSD components, including a number of valves, instruments, and pumps, which the licensee credited for post-fire SSD. This review evaluated whether the circuit analysis properly categorized the selected components availability. In cases where the circuit analysis indicated resolution of a potential problem was needed, the team inspected implementation of that resolution. Individual circuit analysis elements reviewed included the Fire Hazards Analysis Calculation, the Major Equipment and Instrumentation Affected List, the Components Block Diagrams, cable routing information, and calculations. The team also evaluated the potential effects of open circuits, short circuits, and shorts to ground for the selected equipment. The criterion for acceptance was that a fire in any of the FAs would not defeat the capability to achieve and maintain SSD. The list of components reviewed is contained in the Attachment. | ||
====b. Findings==== | ====b. Findings==== | ||
Line 143: | Line 190: | ||
The team requested a demonstration of the sound powered phones and periodic testing for the system as well. | The team requested a demonstration of the sound powered phones and periodic testing for the system as well. | ||
====b. Findings==== | ====b. Findings==== | ||
Line 152: | Line 197: | ||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team reviewed the adequacy of the emergency lighting units (ELUs) used to support plant personnel during post-fire safe shutdown for the selected FAs. The team performed plant walkdowns and observed the placement and coverage area of fixed 8-hour battery pack emergency lights throughout the selected FAs to evaluate their adequacy for illuminating access and egress pathways and any equipment requiring local operation and/or instrumentation monitoring for post-fire SSD. The team observed random testing of select emergency lighting to verify the functionality. The team also reviewed other lighting systems used in the plant such as the diesel lighting system, and the LD lighting circuit powered from the 125V Vital Battery Boards. The team observed whether emergency exit lighting was provided for personnel evacuation pathways to the outside exists as identified in NFPA 101, Life Safety Code, and the Occupational Safety and Health Administration (OSHA) Part 1910, Occupational Safety and Health Standards. This review also included examination of whether backup ELUs were provided for the primary and secondary fire emergency equipment storage locker locations and dress-out areas in support of fire brigade operations should power fail during a fire emergency. The team reviewed the design, operation, and testing of the ELUs to verify that they met the requirements of 10 CFR 50, Appendix R, Section III.J. The team also reviewed manufacturers | The team reviewed the adequacy of the emergency lighting units (ELUs) used to support plant personnel during post-fire safe shutdown for the selected FAs. The team performed plant walkdowns and observed the placement and coverage area of fixed 8-hour battery pack emergency lights throughout the selected FAs to evaluate their adequacy for illuminating access and egress pathways and any equipment requiring local operation and/or instrumentation monitoring for post-fire SSD. The team observed random testing of select emergency lighting to verify the functionality. The team also reviewed other lighting systems used in the plant such as the diesel lighting system, and the LD lighting circuit powered from the 125V Vital Battery Boards. | ||
The team observed whether emergency exit lighting was provided for personnel evacuation pathways to the outside exists as identified in NFPA 101, Life Safety Code, and the Occupational Safety and Health Administration (OSHA) Part 1910, Occupational Safety and Health Standards. This review also included examination of whether backup ELUs were provided for the primary and secondary fire emergency equipment storage locker locations and dress-out areas in support of fire brigade operations should power fail during a fire emergency. | |||
The team reviewed the design, operation, and testing of the ELUs to verify that they met the requirements of 10 CFR 50, Appendix R, Section III.J. The team also reviewed manufacturers data sheets to check if they had at least an 8-hour capacity and the recommended maintenance was being performed. Copies of the last two performances of the 8-hour discharge test (conducted at 18 month interval) and the inspection/cleaning (conducted quarterly) were reviewed. In cases where an ELU failed the surveillance test, the team followed up on the corrective action and programmatic treatment. A sample of work requests written to replace ELUs which failed the surveillance was reviewed to confirm that the work was timely completed. | |||
====b. Findings==== | ====b. Findings==== | ||
Line 160: | Line 209: | ||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team reviewed the | The team reviewed the licensees safe shutdown procedures to determine if any repairs were necessary to achieve cold shutdown. The team also verified inventory in support of operations should cold shutdown repairs be necessary during a fire emergency. The team verified that the licensee had adequate measures described in Abnormal Operating Procedures AOP-C.04 Shutdown from Auxiliary Control Room and AOP-N.08 Appendix R Fire Safe Shutdown for achieving cold shutdown operations. The team also independently verified equipment, tools, and supplies used for repairing equipment, following a fire, and needed to bring the units from hot standby to cold shutdown. | ||
====b. Findings==== | ====b. Findings==== | ||
No findings of significance were identified. 10. Compensatory Measures | No findings of significance were identified. | ||
10. Compensatory Measures | |||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team reviewed the administrative controls for out-of-service, degraded, and/or inoperable, fire protection features (e.g., detection and suppression systems and equipment, passive fire barriers, or pumps, valves or electrical devices providing post-fire safe shutdown functions or capabilities). The team reviewed selected fire protection impairment permits and compared them with the conditions and actions required in their fire protection program for degraded fire protection components. The compensatory measures that had been established in these impairments were compared to those specified for the applicable fire protection feature to verify that the risk associated with removing the fire protection feature from service was properly assessed and adequate compensatory measures were implemented in accordance with the approved FPP. | The team reviewed the administrative controls for out-of-service, degraded, and/or inoperable, fire protection features (e.g., detection and suppression systems and equipment, passive fire barriers, or pumps, valves or electrical devices providing post-fire safe shutdown functions or capabilities). The team reviewed selected fire protection impairment permits and compared them with the conditions and actions required in their fire protection program for degraded fire protection components. The compensatory measures that had been established in these impairments were compared to those specified for the applicable fire protection feature to verify that the risk associated with removing the fire protection feature from service was properly assessed and adequate compensatory measures were implemented in accordance with the approved FPP. | ||
Additionally, the team reviewed the | Additionally, the team reviewed the licensees short term compensatory measures (compensatory fire watches) to verify that they were adequate to compensate for a degraded function or feature until appropriate corrective action could be taken and that the licensee was effective in returning the equipment to service in a reasonable period of time. | ||
According to previously generated PER 145212, a fire watch was in place as part of a compensatory measure for a degraded Thermo-Lag fire barrier located on elevation 690 | According to previously generated PER 145212, a fire watch was in place as part of a compensatory measure for a degraded Thermo-Lag fire barrier located on elevation 690 of the Auxiliary Building (Room 690.0-A1, Fire Area FAA-029). The fire watch was observed on one of his rounds in the area of concern. No issues were identified with the conduct or observations made by the fire watch for this degraded barrier. | ||
====b. Findings==== | ====b. Findings==== | ||
No findings of significance were identified. | No findings of significance were identified. | ||
11. Control of Combustibles and Ignition Sources | 11. Control of Combustibles and Ignition Sources | ||
Line 190: | Line 239: | ||
====a. Inspection Scope==== | ====a. Inspection Scope==== | ||
The team reviewed recent independent licensee audits for thoroughness, completeness and conformance to requirements. Requirements for the independent audits are contained in Regulatory Guide 1.189, | The team reviewed recent independent licensee audits for thoroughness, completeness and conformance to requirements. Requirements for the independent audits are contained in Regulatory Guide 1.189, Fire Protection for Operating Nuclear Power Plants, Generic Letter 82-21, Technical Specifications for Fire Protection Audits, and the licensees Nuclear Quality Assurance Plan. The team reviewed Nuclear Assessment Audits SSA 0501, dated June 1, 2005, and SSA 0605, dated April 27, 2007. Both these audits were triennial scope audits. | ||
====b. Findings and Observations==== | ====b. Findings and Observations==== | ||
No findings of significance were identified. The | No findings of significance were identified. The licensees program for independent audits was to perform biennial audits, which have the scope of triennial audits as defined in Generic Letter 82-21. These audits were complete and comprehensive, and identified a number of problems, which were entered into the licensees corrective action program. | ||
The 2005 audit, SSA 0501, identified an issue with the ability to carry out operator actions within the time frame of the limiting analysis. The level B PER, which requires a root cause analysis, was processed to address this issue. | |||
{{a|4OA5}} | {{a|4OA5}} | ||
==4OA5 Other== | ==4OA5 Other== | ||
The following would tend to make the finding very low safety significance: | (Open) URI 05000327, 328/2005011-06, Potential for Fire Damage to Spuriously Open a Containment Sump Isolation Valve. | ||
The licensees actions in relation to this URI were reviewed as well as the risk significance of the issue. The URI was originally established for the NRC to review the licensing basis related to multiple intra-cable short-circuits. The technical issue involved two fire-induced short-circuits within a multi-conductor control cable for flow control valve FCV-63-73 which could cause the valve to spuriously open and provide a flow path from the reserve water storage tank the containment sump. In the case of FCV-63-73, no single short-circuit within the control cables could cause spurious operation. Review of the licensees circuit analysis documents revealed that the licensees design basis was to design against one inter-cable short-circuit. Their design basis documents stated that two simultaneous short-circuits between specific sets of conductors, while other conductors in the same cable remained intact was not a credible event. The licensee stated that this approach had been reviewed and approved by the NRC and, therefore, was their licensing basis. The licensee did not present any documents that supported this licensing basis contention. NRC Regulatory Information Summary (RIS) 2004-03, Rev.1, states that for any individual multi-conductor cable the fire-induced short-circuiting of any combination of conductors, regardless of number, may be postulated. This statement was based on the results of fire testing of cables that demonstrated that such an occurrence was credible as it actually occurred during the testing. | |||
During the inspection, the inspector reviewed the control circuit in question and confirmed that it would take two short-circuits to produce the spurious operation. The inspector also made an in-plant inspection of the route of the cables in question. The cable ran from a motor control center in the auxiliary building to the main control room. | |||
This revealed that the only ignition sources in the vicinity of the cables were the particular motor control center section from which the circuit emanates and the control panel in the main control room where the valve control switch is located. The inspector, in consultation with the Senior Reactor Analyst, performed a qualitative analysis of the risk significance of the postulated scenario, i.e. fire-induced short-circuit results in spurious opening of valve FCV-63-73, incorporating the facts obtained during the inspection. The following would tend to make the finding very low safety significance: | |||
One ignition source in the auxiliary building portion of the route. | |||
An isolation transfer switch was provided to isolate the circuit from the control | An isolation transfer switch was provided to isolate the circuit from the control building. | ||
The relatively low probability of the postulated failure mode involving | The relatively low probability of the postulated failure mode involving spurious actuation, two smart short-circuits in a circuit powered from a control transformer, which testing showed was the least likely type of control circuit to sustain a spurious operation. | ||
Fire at the motor control center in question would damage only a few | Fire at the motor control center in question would damage only a few circuits, and recovery from reserve water storage tank drain down to the containment sump would be possible. | ||
The inspectors, in consultation with the Nuclear Reactor Regulation (NRR) program office for fire protection, concluded that characterization of this issue in terms of a performance deficiency or violation should wait until the generic industry issue of multiple spurious operations is resolved. Therefore this URI will remain open. | The inspectors, in consultation with the Nuclear Reactor Regulation (NRR) program office for fire protection, concluded that characterization of this issue in terms of a performance deficiency or violation should wait until the generic industry issue of multiple spurious operations is resolved. Therefore this URI will remain open. | ||
(Closed) URI 05000327, 328/2005011-03, Sprinklers Apparently too far below Ceiling in Cable Spreading Room | |||
=====Introduction:===== | =====Introduction:===== | ||
Line 216: | Line 272: | ||
=====Description:===== | =====Description:===== | ||
This unresolved item concerning the design of the sprinkler system in the cable spreading room (room number 706.0-C2) was opened at the time of the 2005 triennial fire protection inspection for two reasons: | This unresolved item concerning the design of the sprinkler system in the cable spreading room (room number 706.0-C2) was opened at the time of the 2005 triennial fire protection inspection for two reasons: | ||
: (1) to determine if the as-built configuration had been approved by the NRC, and | |||
: (2) to review the capacity and capability of the as-built configuration to suppress fires. | |||
The team reviewed of all the licensing basis documents listed in License Condition 16 (Unit 1) and License Condition 13 (Unit 2) and did not find that the NRC had reviewed and approved the sprinkler head to ceiling dimension, nor did the team find that the NRC approved a deviation from the NFPA code of record. | The team reviewed of all the licensing basis documents listed in License Condition 16 (Unit 1) and License Condition 13 (Unit 2) and did not find that the NRC had reviewed and approved the sprinkler head to ceiling dimension, nor did the team find that the NRC approved a deviation from the NFPA code of record. Supplement 1 of NUREG 011 (a Safety Evaluation Report), Section 9.5. II.A, states that the sprinkler systems are installed in accordance with NFPA Standard 13. Supplement 1, Section 9.5.IV, states that the cable spreading room has an automatic pre-action sprinkler system and a manual total flooding carbon dioxide system. These and other documents reviewed are listed in the Attachment to this report. The conclusion from the review of historical documents was that there is no documented approval of a sprinkler system in the cable spreading room or any other room deviating from the NFPA codes with regard to the sprinkler head to ceiling dimension. | ||
The cable spreading room is installed directly below the dual unit control room. It contains the vast majority of cables running between points in the plant and the control room. The floor area of the room is approximately 219 feet by 42 feet and the height is 25 feet. There is one north-south girder running 219 feet down the center of the room and beams running perpendicular to the girder. A typical beam was measured by the team at 22 1/2 inches deep. A typical pocket formed by the girder and beams is 21 feet by 6 1/2 feet (136.5 sq. ft.), although some are 21 by 8 (168 sq. ft.). Sprinkler heads are installed at two levels. Sprinklers at the upper level are about 30 inches below the ceiling or about 22 - 6 from the floor. Their spacing varies but there is a maximum of 10 feet between sprinklers. There are two levels of sprinklers. Sprinklers at the lower level are about 12 feet from the floor. The lower level sprinkler heads are offset horizontally from the upper level. There are a total of 115 sprinkler heads in the upper group and 119 in the lower. All the sprinkler heads were fitted with square metal caps or covers of about 18 inches by 18 inches dimension just above the heads. The metal covers have edges turned down on three sides. | |||
The type of construction for this room as defined by NFPA Std. 13-1975 is either beam and girder or panel. As such, the maximum specified distance of sprinkler heads below the ceiling is 16 inches or 18 inches, respectively. Therefore, the upper level sprinklers are 12 to 14 inches greater distance below the ceiling than specified in the NFPA standard. For panel construction the NFPA standard would allow a sprinkler head to be 22 inches below the ceiling if it is located directly below a beam rather than in a bay, but the sprinkler heads in the spreading room are in the bays and not directly below a beam. In terms of the horizontal distance between sprinkler heads and coverage requirements, the spacing of the upper level is within the NFPA Std 13 requirements. | |||
According to design documents, the sprinkler heads are Model QE manufactured by Star Sprinkler Corp. which are UL approved (or equal). They are large orifice type, standard release, upright pendent with a 1/2 inch National Pipe Thread (NPT) connection, rated 212 degrees F, intermediate temperature class. They are fusible link type, brass or bronze body, designed to operate in less than one minute. Since the cable spreading room is an air conditioned room, a sprinkler head of a lower temperature rating should have been used. While the 212 degree F rating is not a definite code deviation, it results in a slower response, especially since the sprinkler heads are not at the recommended distance from the ceiling. | According to design documents, the sprinkler heads are Model QE manufactured by Star Sprinkler Corp. which are UL approved (or equal). They are large orifice type, standard release, upright pendent with a 1/2 inch National Pipe Thread (NPT) connection, rated 212 degrees F, intermediate temperature class. They are fusible link type, brass or bronze body, designed to operate in less than one minute. Since the cable spreading room is an air conditioned room, a sprinkler head of a lower temperature rating should have been used. While the 212 degree F rating is not a definite code deviation, it results in a slower response, especially since the sprinkler heads are not at the recommended distance from the ceiling. | ||
In conclusion, the sprinkler heads are installed at 30 inches below the ceiling which | In conclusion, the sprinkler heads are installed at 30 inches below the ceiling which places them below the beams and below the ceiling jet. This installation results in a very slow system response, and does not meet NFPA Std 13-1975. | ||
=====Analysis:===== | =====Analysis:===== | ||
This finding is a performance deficiency because the licensee did not locate the sprinkler heads according to the applicable industry code of record for the facility | This finding is a performance deficiency because the licensee did not locate the sprinkler heads according to the applicable industry code of record for the facility. | ||
This procedure requires local operator actions to be performed to accomplish certain functions which would otherwise be automatic functions, and failure probabilities were assigned accordingly. The result of the analysis was that the finding was of very low safety significance, Green. | The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. The risk significance of the finding was determined using Manual Chapter (MC) 0609, Appendix F, Fire Protection Significance Determination Process. Pursuant to MC 0609, Appendix F, the finding category was fixed fire protection systems. The nature of the degradation of the water based suppression system is related to the response time of the system. The low placement of sprinklers together with the 212 degree F temperature rating of the sprinkler heads will result in a response time slower than that of a system that meets NFPA Std 13. A degradation rating of high, as defined by MC 0609, Appendix F, must be assigned since a moderate degradation rating cannot be supported by technical reasoning. The duration factor was equal to one. The ignition source of interest is non-IEEE Std 383 qualified cables. Since the performance deficiency affects the automatic fire suppression system and the ignition source of interest is non-qualified cable, there is no obvious fire damage target. Therefore, a worst case scenario involving a loss of offsite power and shutdown from the auxiliary control room was evaluated to determine the significance. No credit was given for fire suppression since it could not be assured that a fire could be suppressed before operators would have to make the decision to implement the alternate shutdown procedure. This is based on the facts that the response time of the suppression system could be very long, the postulated fire is a self-ignited cable, and manual suppression would be delayed due to the difficulty in pinpointing the exact location of the fire in a large room. The generic fire frequency for self-ignited cable fires given in MC 0609, Appendix F, was adjusted with a weighing factor in accordance with | ||
===5. An initiating event likelihood of 1.4 E-4 was conservatively assigned.=== | |||
Once the initiating event likelihood was determined, the significance determination process worksheet for loss of offsite power was evaluated. A probability of failure of each safety function shown on the worksheet was assigned considering the operational lineup dictated by Abnormal Operating Procedure AOP-C.04, Shutdown from Auxiliary Control Room. This procedure requires local operator actions to be performed to accomplish certain functions which would otherwise be automatic functions, and failure probabilities were assigned accordingly. The result of the analysis was that the finding was of very low safety significance, Green. | |||
=====Enforcement:===== | =====Enforcement:===== | ||
Sequoyah License Condition 16 for Unit 1 and License Condition 13, Fire Protection, for Unit 2 require that TVA implement and maintain in effect all provisions of the approved fire protection program referenced in the Sequoyah Nuclear | Sequoyah License Condition 16 for Unit 1 and License Condition 13, Fire Protection, for Unit 2 require that TVA implement and maintain in effect all provisions of the approved fire protection program referenced in the Sequoyah Nuclear Plants Final Safety Analysis Report (FSAR). FSAR Section 9.5.1.1 states that the Fire Protection System and fire protection features are described in the FPR. The FPR, Part II, Section 14.3, Page 54, requires that the sprinkler system for the cable spreading room be operable. The FPR, Part VI, Section 3.3 states that NFPA 13-1975, Automatic Sprinkler Systems, is the code used to evaluate the adequacy of the sprinkler systems. NFPA 13, Section 4-3.2.2 (beam and girder construction) states that sprinklers shall be located not more than 20 inches below floor decks and Section 4-3.4.2 (panel construction) states that sprinklers shall be located not more than 22 inches below the floor deck. | ||
Contrary to the above, the cable spreading room has either beam and girder or panel construction and the sprinklers are located 30 inches below the floor deck. Because this finding is of very low safety significance and has been entered into the corrective action program as PER 147467, this finding is being treated as a non-cited violation (NCV),consistent with Section VI.A.1 of the NRCs Enforcement Policy. This finding is identified as NCV 05000327, 328/2008006-03, Sprinklers too far below Ceiling in Cable Spreading Room. | |||
(Closed) URI 05000327, 328/2005011-07, Potential for Fire Damage to Spuriously Close the Charging Header Flow Control Valve Flow control valve FCV-62-93 in the chemical and volume control system (CVCS) is an air operated valve. Its position in the CVCS is at the discharge of the charging pumps, and its spurious closure would shut off all flow to the reactor coolant pump (RCP) seals. | |||
The safe shutdown strategy is to maintain flow to the RCP seals (or re-establish flow within 13 minutes). Make-up to the reactor coolant system would be via seal injection. | |||
The normal charging path is shut off by operators in accordance with the SSD procedure. | |||
Air-operated valve FCV-62-93 would fail in the open position (the desired position) on loss of air or loss of electrical signal. However, the valve position is controlled with an instrumentation controller. The instrumentation loop works on a 10 - 50 milliampere signal: 10 milliamperes to open and 50 milliamperes to close. The instrumentation cables to the valve are shielded twisted pairs with drain wire and cross-linked polyethylene insulation with polyvinyl chloride jacket. The cables run in cable tray with other similar type cables carrying 10 - 50 milliampere signals. The URI was established to evaluate the possibility/credibility that a fire-induced cable to cable interaction could inject 50 milliamperes from a cable carrying 50 milliamperes into the target cable and cause the valve to close. | Air-operated valve FCV-62-93 would fail in the open position (the desired position) on loss of air or loss of electrical signal. However, the valve position is controlled with an instrumentation controller. The instrumentation loop works on a 10 - 50 milliampere signal: 10 milliamperes to open and 50 milliamperes to close. The instrumentation cables to the valve are shielded twisted pairs with drain wire and cross-linked polyethylene insulation with polyvinyl chloride jacket. The cables run in cable tray with other similar type cables carrying 10 - 50 milliampere signals. The URI was established to evaluate the possibility/credibility that a fire-induced cable to cable interaction could inject 50 milliamperes from a cable carrying 50 milliamperes into the target cable and cause the valve to close. | ||
Line 244: | Line 312: | ||
{{a|4OA6}} | {{a|4OA6}} | ||
==4OA6 Meetings, Including Exit== | ==4OA6 Meetings, Including Exit== | ||
On June 27, 2008, the lead inspector presented the inspection results to Mr. T. Cleary, Site Vice President, and other members of the | |||
On June 27, 2008, the lead inspector presented the inspection results to Mr. T. Cleary, Site Vice President, and other members of the licensees staff. Post-inspection in-office reviews and analysis of significance of findings resolved certain open issues, and the final results of the inspection were presented to Mr. T. Cleary and other members of the licensees staff on August 8, 2008. The licensee acknowledged the findings. Proprietary information is not included in this report. | |||
=SUPPLEMENTAL INFORMATION= | =SUPPLEMENTAL INFORMATION= | ||
Line 251: | Line 320: | ||
===Licensee Personnel=== | ===Licensee Personnel=== | ||
: | : | ||
: [[contact::J. Campbell]], Electrical Design Manager | : [[contact::J. Campbell]], Electrical Design Manager | ||
: [[contact::M. Casner]], Engineering Design Manager | : [[contact::M. Casner]], Engineering Design Manager | ||
: [[contact::C. Church]], Plant Manager | : [[contact::C. Church]], Plant Manager | ||
: [[contact::T. Cleary]], Site Vice President | : [[contact::T. Cleary]], Site Vice President | ||
: [[contact::L. Cross]], Maintenance manager | : [[contact::L. Cross]], Maintenance manager | ||
: [[contact::R. Egli]], Engineering Programs Engineer | : [[contact::R. Egli]], Engineering Programs Engineer | ||
: [[contact::M. Hicks]], Performance Improvement Manager | : [[contact::M. Hicks]], Performance Improvement Manager | ||
: [[contact::K. Jones]], Manager Site Engineering | : [[contact::K. Jones]], Manager Site Engineering | ||
: [[contact::P. Johnson]], Fire Protection Supervisor | : [[contact::P. Johnson]], Fire Protection Supervisor | ||
: [[contact::D. Porter]], Operations Procedure Writer | : [[contact::D. Porter]], Operations Procedure Writer | ||
: [[contact::R. Proffitt]], Licensing Engineer | : [[contact::R. Proffitt]], Licensing Engineer | ||
: [[contact::P. Simmons]], Operations Manager | : [[contact::P. Simmons]], Operations Manager | ||
: [[contact::J. Smith]], Licensing Manager | : [[contact::J. Smith]], Licensing Manager | ||
: [[contact::E. Turner]], Electrical Design Engineer | : [[contact::E. Turner]], Electrical Design Engineer | ||
: [[contact::G. Vickery]], Manager Nuclear Assurance | : [[contact::G. Vickery]], Manager Nuclear Assurance | ||
===NRC Personnel=== | ===NRC Personnel=== | ||
: | : | ||
: [[contact::H. Barrett]], Engineer, Fire Protection Branch, NRR | : [[contact::H. Barrett]], Engineer, Fire Protection Branch, NRR | ||
: [[contact::K. Kennedy]], Director, Division of Reactor Safety, Region II | : [[contact::K. Kennedy]], Director, Division of Reactor Safety, Region II | ||
: [[contact::A. Klein]], Branch Chief, Fire Protection Branch, NRR | : [[contact::A. Klein]], Branch Chief, Fire Protection Branch, NRR | ||
: [[contact::R. Nease]], Branch Chief, Engineering Branch 2, Region II | : [[contact::R. Nease]], Branch Chief, Engineering Branch 2, Region II | ||
: [[contact::C. Young]], Senior Resident Inspector, Sequoyah Nuclear Plant | : [[contact::C. Young]], Senior Resident Inspector, Sequoyah Nuclear Plant | ||
==LIST OF ITEMS== | ==LIST OF ITEMS== | ||
OPENED, CLOSED AND DISCUSSED | |||
===OPENED, CLOSED AND DISCUSSED=== | |||
===Opened=== | ===Opened=== | ||
: 05000327, 328/2008006-02 | : 05000327, 328/2008006-02 URI Sprinkler System in Room 690.0-A1 of the Auxiliary Building has NFPA Code Deviation (1R05.03.b (1)) | ||
Sprinkler System in Room | |||
===Opened and Closed=== | ===Opened and Closed=== | ||
: 05000328/2008006-01 | : 05000328/2008006-01 NCV Fire Detectors in 480 V Shutdown Board Room 2B2 Not Installed According to NFPA Code (1R05.03.b (2)) | ||
: 05000327, 328/2008006-03 | : 05000327, 328/2008006-03 NCV Sprinklers too far below Ceiling in Cable Spreading Room (4OA5) | ||
===Closed=== | ===Closed=== | ||
: 05000327, 328/2005011-03 | : 05000327, 328/2005011-03 URI Sprinklers Apparently too far below Ceiling in Cable Spreading Room (4OA5) | ||
: 05000327, 328/2005011-07 URI Potential for Fire Damage to Spuriously Close the Charging Header Flow Control Valve (4OA5) | |||
Sprinklers Apparently too far | |||
: 05000327, 328/2005011-07 | |||
Potential for Fire Damage to | |||
===Discussed=== | ===Discussed=== | ||
: 05000327, 328/2005011-06 | : 05000327, 328/2005011-06 URI Potential for Fire damage to Spuriously Open a Containment Sump Isolation Valve (4OA5) | ||
Potential for Fire damage to | LIST OF COMPONENTS INSPECTED (Refer Report Section 1RO5.06 Circuit Analysis) | ||
1-FCV-062-054 Excess Letdown Isolation Valve 1-FCV-062-055 Excess Letdown Isolation Valve 1-FCV-062-056 Excess Letdown Isolation Valve 1-LCV-062-133 Volume Control Tank Outlet Isolation Valve 2-LCV-062-132 Volume Control Tank Outlet Isolation Valve 2-LCV-062-133 Volume Control Tank Outlet Isolation Valve 2-PMP-003-118 Motor driven Auxiliary Feedwater Pump A 2-PMP-003-128 Motor Driven Auxiliary Feedwater Pump B 1-PMP-003-142 Turbine Driven Auxiliary Feedwater Pump 1-PCV-001-012 Loop 2 Atmospheric Relief Valve 1-PCV-001-023 Loop 3 Atmospheric Relief Valve 2-PCV-001-012 Loop 2 Atmospheric Relief Valve 2-PCV-001-023 Loop 3 Atmospheric Relief Valve 1-FCV-068-332 Pressurizer Relief Block Valve 1-PCV-068-334 Pressurizer Power Operated Relief Valve 2-FCV-068-332 Pressurizer Relief Block Valve 2-FCV-068-333 Pressurizer Relief Block Valve 2-FSV-068-396 Reactor Vessel Head Vent Throttle Valve 2-FSV-068-397 Reactor Vessel Head Vent Throttle Valve 1-FCV-062-093 Charging Flow Control Valve & Flow Indicator 1-T-068-001 Loop #1 Hot Leg Temperature 1-T-068-065 Loop #4 Hot Leg Temperature 2-L-003-171 Steam Generator #4 Narrow Range Level 2-T-068-001 Loop #1 Hot Leg Temperature 2-T-068-065 Loop #1 Hot Leg Temperature | |||
1-FCV-062-056 Excess Letdown Isolation Valve 1-LCV-062-133 Volume Control Tank Outlet Isolation Valve 2-LCV-062-132 Volume Control Tank Outlet Isolation Valve 2-LCV-062-133 Volume Control Tank Outlet Isolation Valve 2-PMP-003-118 Motor driven Auxiliary Feedwater Pump A | |||
2-PMP-003-128 Motor Driven Auxiliary Feedwater Pump B 1-PMP-003-142 Turbine Driven Auxiliary Feedwater Pump 1-PCV-001-012 Loop 2 Atmospheric Relief Valve 1-PCV-001-023 Loop 3 Atmospheric Relief Valve 2-PCV-001-012 Loop 2 Atmospheric Relief Valve 2-PCV-001-023 Loop 3 Atmospheric Relief Valve 1-FCV-068-332 Pressurizer Relief Block Valve | |||
1-PCV-068-334 Pressurizer Power Operated Relief Valve 2-FCV-068-332 Pressurizer Relief Block Valve 2-FCV-068-333 Pressurizer Relief Block Valve 2-FSV-068-396 Reactor Vessel Head Vent Throttle Valve 2-FSV-068-397 Reactor Vessel Head Vent Throttle Valve | |||
1-FCV-062-093 Charging Flow Control Valve & Flow Indicator 1-T-068-001 | |||
2-T-068-065 | |||
==LIST OF DOCUMENTS REVIEWED== | ==LIST OF DOCUMENTS REVIEWED== | ||
}} | }} |
Latest revision as of 04:02, 22 December 2019
ML082250098 | |
Person / Time | |
---|---|
Site: | Sequoyah ![]() |
Issue date: | 08/11/2008 |
From: | Nease R NRC/RGN-II/DRS/EB2 |
To: | Campbell W Tennessee Valley Authority |
References | |
IR-08-006 | |
Download: ML082250098 (33) | |
Text
UNITED STATES NUCLEAR REGULATORY COMMISSION gust 11, 2008
SUBJECT:
SEQUOYAH NUCLEAR PLANT - NRC TRIENNIAL FIRE PROTECTION INSPECTION REPORT 05000327/2008006 AND 05000328/2008006
Dear Mr. Campbell:
On June 27, 2008, the U. S. Nuclear Regulatory Commission (NRC) completed an inspection at your Sequoyah Nuclear Plant, Units 1 and 2. The enclosed report documents the inspection results, which were discussed on June 27, 2008, with Mr. T. Cleary and other members of your staff. Subsequently, additional in-office reviews were conducted and the final inspection results were discussed by telephone with Mr. T. Cleary and other members of your staff on August 8, 2008.
The inspection examined activities conducted under your license as they relate to safety and compliance with the Commissions rules and regulations and with the conditions of your license.
The inspectors reviewed selected procedures and records, observed activities, and interviewed personnel.
This report documents two NRC-identified findings of very low safety significance (Green) which were determined to involve violations of NRC requirements. However, because of the very low safety significance and because they were entered into your corrective action program, the NRC is treating the findings as non-cited violations (NCV) consistent with Section VI.A.1 of the NRC Enforcement Policy. If you contest an NCV in this report, you should provide a response within 30 days of the date of this inspection report, with the basis for your denial, to the Nuclear Regulatory Commission, ATTN.: Document Control Desk, Washington DC 20555-0001; with copies to the Regional Administrator Region II; the Director, Office of Enforcement, United States Nuclear Regulatory Commission, Washington, DC 20555-0001; and the NRC Resident Inspector at the Sequoyah Nuclear Plant.
TVA 2 In accordance with 10 CFR 2.390 of the NRC's "Rules of Practice," a copy of this letter, its enclosure, and your response (if any) will be available electronically for public inspection in the NRC Public Document Room or from the Publically Available Records (PARS) component of NRC s document system (ADAMS). ADAMS is accessible from the NRC Website at http://www.nrc.gov/reading-rm/adams.html (the Public Electronic Reading Room).
Sincerely,
/RA/
Rebecca L. Nease, Chief Engineering Branch 2 Division of Reactor Safety Docket Nos.: 50-327, 50-328 License Nos.: DPR-77, DPR-79
Enclosure:
Inspection Report 05000327/2008006 and 05000328/2008006 w/Attachment: Supplemental Information
REGION II==
Docket No.: 50-327, 50-328 License No.: DPR-77, DPR-79 Report No.: 05000327/2008006 and 05000328/2008006 Licensee: Tennessee Valley Authority (TVA)
Facility: Sequoyah Nuclear Plant Location: Sequoyah Access Road Soddy-Daisy, TN, 37379 Dates: June 9 - 13, 2008 (Week 1)
June 23 - 27, 2008 (Week 2)
Inspectors: P. Fillion, Senior Reactor Inspector (Lead Inspector)
F. McCreesh, Fire Protection Engineer (Consultant)
N. Staples, Reactor Inspector R. Rodriguez, Senior Reactor Inspector Accompanying J. Montgomery, Co-Op Student Approved by: Rebecca Nease, Chief Engineering Branch 2 Division of Reactor Safety Enclosure
SUMMARY OF FINDINGS
IR 05000327/2008006, 05000328/2008006; 06/09 - 13/2008 and 06/23 - 27/2008; Sequoyah
Nuclear Plant, Units 1 & 2; Triennial Fire Protection Inspection.
This report covers an announced two-week triennial fire protection inspection by a team of three regional inspectors and one contract inspector. Two Green non-cited violations (NCV) were identified. The significance of most findings is indicated by their color (Green, White, Yellow,
Red) using Inspection Manual Chapter (IMC) 0609, Significance Determination Process (SDP). Findings for which the SDP does not apply may be Green or be assigned a severity level after NRC management review. The NRC's program for overseeing the safe operation of commercial nuclear power reactors is described in NUREG-1649, Reactor Oversight Process,
Revision 4, dated December 2006.
NRC-Identified and Self-Revealing Findings
Cornerstone: Mitigating Systems
Green: A Green NCV of Unit 2 License Condition 13, Fire Protection, was identified since fire detectors in the Unit 2 480 Volt shutdown board room 2B2 were not installed according to the applicable National Fire Protection Association code. Specifically, two detectors were located near forced ventilation fresh air inlets. The licensee entered this issue into their corrective action program and promptly posted a continuous fire watch in the fire area.
This finding is a performance deficiency because the licensee did not properly locate the smoke detector or the heating, ventilating and air conditioning (HVAC)system supply air inlet registers to adequately comply with the applicable industry code of record for the facility. As a result two of the four smoke detectors would not be effective in detecting fires. The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. Considering the degree of system degradation, the length of time the problem existed, the calculated fire frequency for the fire area and shutdown systems independent of the fire area the finding was of very low safety significance.
Green: A green NCV of Unit 1 License Condition 16 and Unit 2 License Condition 13, Fire Protection, was identified for failure to install the automatic suppression system (sprinkler system) in the cable spreading room according to the applicable National Fire Protection Association standard with regard to the ceiling to sprinkler head dimension. As a result, the fusible link type sprinkler heads may be significantly slower than originally intended after fire ignition. The licensee entered this problem into their corrective action program.
This finding is a performance deficiency because the licensee did not locate the sprinkler heads according to the applicable industry code of record for the facility.
The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e.
fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. The finding was determined to be of very low safety significance when the likelihood of fires, the transients that could be initiated by fires and the probability of failure of mitigating systems for those transients were evaluated.
Licensee Identified Violations
None
REPORT DETAILS
REACTOR SAFETY
Cornerstones: Initiating Events, Mitigating Systems, Barrier Integrity
1R05 Fire Protection
This report presents the results of a triennial fire protection inspection conducted in accordance with NRC Inspection Procedure (IP) 71111.05T, Fire Protection (Triennial).
The objective of the inspection was to review the Sequoyah Nuclear Plant Units 1 and 2 fire protection program (FPP). The team selected three fire areas (FAs) for detailed review to examine the licensees implementation of the FPP. The three FAs chosen for review were selected based on available risk information as analyzed onsite by a Senior Reactor Analyst from Region II, data obtained in plant walkdowns regarding potential ignition sources, location and characteristics of combustibles and location of equipment needed to achieve and maintain safe shutdown (SSD) of the reactor. Other considerations for selecting the FAs were the relative complexity of the post-fire SSD procedure, information contained in FPP documents, and results of prior NRC triennial fire protection inspections. Section 71111.05-05 of the IP specifies a minimum sample size of three fire areas. Detailed inspection of these three fire areas fulfills the procedure completion criteria. The three areas chosen were:
Dual unit cable spreading room, identified as room number 706.0-C2, part of Fire Area FAC-017. Alternate shutdown type compliance was used for this FA. This room has smoke detectors and sprinklers.
480 V board room 2B, identified as room number 749.0-A15, Fire Area FAA-107.
10 CFR 50, Appendix R, III.G.2 type compliance was used for this area. This room has smoke detection and sprinklers and contains motor control centers, inverters, battery chargers.
Fire Area FAA-029 in auxiliary building, includes one large room and 11 smaller rooms and compartments. This area contains much safety-related equipment.
10 CFR 50, Appendix R, III.G.2 type compliance was used for this area. The area has smoke detection and sprinklers.
For each FA selected, the inspection team evaluated the licensees FPP against the applicable NRC requirements. The documents reviewed by the team are listed in the
.
.01 SSD Analysis and Protection of SSD Capabilities
a. Inspection Scope
The team reviewed those portions of the Fire Protection Report (FPR) dealing with the SSD analysis. One objective of this review was to evaluate the completeness and depth of the analysis which determined the strategy for accomplishing the various system functions necessary to achieve and maintain hot shutdown, accomplish long term cooldown and achieve cold shutdown following a severe fire. Particular attention was paid to reactor coolant system inventory control, reactivity control and steam generator inventory control. A secondary objective of reviewing the SSD analysis was to understand its details so it could be determined whether the operations post-fire shutdown procedure was consistent with the analysis.
Through a combination of design information review and in-plant inspection, the team ascertained whether the fire protection features in place to protect the SSD capability satisfy the requirements of Appendix R,Section III.G.
b. Findings
No findings of significance were identified.
.02 Passive Fire Protection
a. Inspection Scope
The team inspected the material condition of accessible passive fire barriers surrounding and within the fire areas selected for review. Barriers in use included walls, ceilings, floors, mechanical and electrical penetration seals, doors, and dampers. The team compared the fire barrier ratings in various design documents and drawings to the data contained in the FPR. Construction details and fire endurance test data which established the ratings of fire barriers were reviewed by the team. Engineering evaluations and relevant deviations described in licensee submittals and NRC safety evaluations related to fire barriers were reviewed. Electrical fire barrier raceway systems were observed in the plant to confirm that the appropriate materials and construction methods were used to assure that the respective fire barriers met their intended design function.
b. Findings
No findings of significance were identified.
.03 Active Fire Protection
a. Inspection Scope
The team performed in-plant observations of systems, reviewed design documents, and reviewed applicable National Fire Protection Association (NFPA) codes and standards, to assess the material condition and operational lineup of fire detection and suppression systems. The appropriateness of detection and suppression methods for the category of fire hazards in the various areas was reviewed.
The team reviewed the fire detection surveillance instructions as well as the most recently completed surveillance tests for each of the three selected FAs. The criteria applied to this portion of the inspection was that each detector has the capability to detect smoke and actuate a signal at its respective local fire alarm control panel as well as in the main control room.
The team reviewed the fire brigade staging and dress-out areas to assess the operational readiness of fire fighting and smoke control equipment. The fire brigade personal protective equipment and the self-contained breathing apparatuses were reviewed for adequacy and functionality. The team also reviewed operator and fire brigade staffing, fire brigade response, fire brigade qualification training, and the fire brigade drill program procedures. Two fire brigade response-to-drill scenarios that transpired over the last six months were reviewed. The team reviewed the pre-fire plans for the selected areas to verify that these plans were consistent with industry practice.
The team reviewed selected fire protection water delivery and supply system components required for manual fire fighting and/or water-based fixed automatic fire suppression systems to verify that the components would not be damaged or inhibited from fire-induced failures of electrical power supplies or control circuits. The team reviewed the fire hazards analysis to verify that the availability of the fire pumps was evaluated for the selected fire areas. The team reviewed the hydraulic calculations for the yard main underground piping loop supply system (plant hydraulic base model) and the hydraulic calculation for the 480 V board room 2B. The review included the checking of various nodes, elevations and pipe lengths to assure that the calculations were performed in a technically acceptable manner.
b. Findings
- (1) Layout of Sprinkler System in the FAA-029 The team observed a number of water suppression sprinkler heads in the eastern portion of the Auxiliary Building Elev. 690 (Room 690.0-A1, Fire Area FAA-029) that were located approximately six feet below the ceiling. These sprinkler heads are part of an NFPA 13 preaction sprinkler system which requires that the sprinkler heads in this area be no more than 12 inches below the ceiling. The sprinkler system in this area would not be effective in a response to a fire since the time delay to fuse any particular sprinkler head could be significant due to the location of the sprinkler heads. This portion of the sprinkler system does not meet the requirements of NFPA 13 and the licensee could not produce an evaluation or analysis that demonstrated the capability of this system to adequately control a potential fire in this area. However, the licensee claimed that the installation had been previously approved by the NRC; therefore, considered the system non-degraded. They did, however, initiate a Problem Evaluation Report (PER) to evaluate the condition. In order to determine all the facts concerning the licensing basis of the system and to review the potential acceptability of the as-built system with its code deviation an URI was established: URI 05000327, 328/2008006-02, Sprinkler System in Room 690.0-A1 of the Auxiliary Building has NFPA Code Deviation.
- (2) Smoke Detectors Located Near HVAC Supply Air Inlets
Introduction:
A Green NCV of Unit 2 License Condition 13, Fire Protection, was identified since fire detectors in the Unit 2 480 V shutdown board room 2B2 were not installed according to the applicable NFPA code.
Description:
The 480V Shutdown Boardroom 2B2 on elevation 734 of the Auxiliary Building (Room 734.0-A18, Fire Area FAA-082) contains four smoke detectors, which would be sufficient to meet the spacing requirements of NFPA 72E, 1974, Automatic Fire Detectors. However, two of the detectors were placed in proximity to the air inlet supply stream of the heating ventilating, and air conditioning (HVAC) system for this room, which would interfere with their ability to detect and respond to smoke from a fire in the room. The Team observed that the flow of air emanating from the air inlets was of sufficient velocity and volume to divert any smoke away from the detector. This determination was based on the fact that hanging conduit tags near the detectors could be observed briskly swaying in the air stream. The NFPA code governing automatic fire detectors specifically addresses the issue. Section 4-5.1.5 of NFPA 72E, 1974, Automatic Fire Detectors, states in part that where forced ventilation is present, detectors shall not be mounted near fresh air inlets. In response to this finding, the licensee initiated PER 147263. This PER recognized that operability of the fire detection system in the room was affected and that a functional evaluation should be performed and completed by July 14, 2008. In the interim, a continuous fire watch was posted in the 480 V shutdown board room. The team verified that the fire watch was in place. The team considered the continuous fire watch to be an adequate temporary compensatory measure to approximate the intended defense in depth until the automatic detection system could be made code compliant.
Analysis:
This finding is a performance deficiency because the licensee did not properly locate the smoke detection or the HVAC supply air inlet registers to adequately comply with their NFPA detection code of record. As a result two of the four smoke detectors would not be effective in detecting fires. The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events.
The risk significance of the finding was determined using Manual Chapter (MC) 0609, Appendix F, Fire Protection Significance Determination Process. Pursuant to MC 0609, Appendix F, the degradation category was fixed fire protection and the degradation rating was moderate. The duration factor was equal to one. Ignition sources in the fire area were general electrical cabinets consisting of load centers and motor control centers. There were 33 sections of these cabinets. Through on-site examination of the fire area it was determined that only one train of SSD equipment and cables existed in the room. Therefore one train of SSD equipment remained unaffected by the fire. Using this data, the finding screened to very low safety significance, Green, at Task 2.4.4 of MC 0609, Appendix F.
Enforcement:
Unit 2 License Condition 13, Fire Protection, 10 CFR 50.48 states:
TVA shall implement and maintain in effect all provisions of the approved fire protection program referenced in the Sequoyah Nuclear Plants Final Safety Evaluation Report and as approved in NRC Safety Evaluation Reports contained in NUREG-0011, Supplements 1, 2 and 5, NUREG-1232, Volume 2, NRC letters dated May 29 and October 6, 1986, and the Safety Evaluation issued on August 12, 1997, for License Amendment No. 218, subject to the following provision: TVA may make changes to the approved fire protection program without prior approval of the Commission only if those changes would not adversely affect the ability to achieve and maintain safe shutdown in the event of a fire.
The Sequoyah FPR, Part VI, Section 3.3, states that NFPA 72E, 1974, Automatic Fire Detectors was used to evaluate the adequacy of existing fire protection features against code requirements.
Contrary to the above, the installed configuration of the smoke detectors in the 480V Shutdown Boardroom 2B2 on elevation 734 of the Auxiliary Building did not meet the requirements of NFPA 72E, 1974, in that two detectors were located near forced ventilation fresh air inlets. This problem existed for many years. Because this degradation of the approved fire detection system is of very low safety significance and has been entered into the licensees corrective action program as PER 147263, this violation is being treated as an NCV, consistent with Section VI.A of the NRC Enforcement Policy. It is identified as NCV 05000328/2008006-01, Fire Detectors in 480 Shutdown Board Room 2B2 Not Installed According to NFPA Code.
.04 Protection from Damage from Fire Suppression Activities
a. Inspection Scope
The team walked down the selected FAs to verify that redundant trains of systems required for hot shutdown, where located in the same fire area, were not subject to damage from fire suppression activities or from the rupture, or inadvertent operation of, fire suppression systems. The team considered the effects of water, drainage, heat, hot gasses, and smoke that could potentially damage all redundant trains. The team also reviewed engineering evaluations that addressed the inadvertent operation of fire protection systems and their effect on safety-related systems or components.
b. Findings
No findings of significance were identified.
.05 Methodology and Operational Implementation for Shutdown from the Main Control Room
and Alternate Shutdown
a. Inspection Scope
The team reviewed the current version of the Sequoyah Nuclear Plant FPR to determine the systems and components credited for SSD in the three FAs selected, as well as those systems and components potentially affected by a fire in the FA. System piping &
instrumentation and electrical one-line diagrams were also reviewed to check the accuracy of the FPR in identifying components and power sources. For a severe fire in the cable spreading room located in the control building, the FPR indicated that the main control room would be abandoned and SSD would be controlled from the auxiliary control room located in the auxiliary building. Therefore, the team reviewed electrical schematics to confirm that circuits which interconnected devices in the main control room and the auxiliary control room contained isolation/transfer switches to allow isolation of potentially fire damaged portions of the circuits. The team reviewed the program and its implementation for testing the isolation/transfer switches.
The team reviewed the operational implementation of the SSD strategy described in the FPR. The FPR strategy was compared to the SSD procedures. Each step in the SSD procedures was evaluated to determine the likelihood of successful completion using the guidance in Section 11(B) of IP 71111.05T. This evaluation included a walkthrough of each procedure step. In cases where the FPR specified that a particular operator action should take place within a definite time period following detection of a fire, the team measured the time in simulated walkthroughs of those procedure steps.
The team inspected and evaluated the readiness of the operations staff to perform the SSD. This was done through a review of shift manning logs for a sample of days in the past two years, review of completed job performance measures, verification of protective gear availability and direct observation of operators ability to locate the components involved in local, outside the control room, procedural actions.
b. Findings
No findings of significance were identified.
.06 Circuit Analysis
a. Inspection Scope
For each of the three selected FAs, the team reviewed selected SSD components, including a number of valves, instruments, and pumps, which the licensee credited for post-fire SSD. This review evaluated whether the circuit analysis properly categorized the selected components availability. In cases where the circuit analysis indicated resolution of a potential problem was needed, the team inspected implementation of that resolution. Individual circuit analysis elements reviewed included the Fire Hazards Analysis Calculation, the Major Equipment and Instrumentation Affected List, the Components Block Diagrams, cable routing information, and calculations. The team also evaluated the potential effects of open circuits, short circuits, and shorts to ground for the selected equipment. The criterion for acceptance was that a fire in any of the FAs would not defeat the capability to achieve and maintain SSD. The list of components reviewed is contained in the Attachment.
b. Findings
No findings of significance were identified.
.07 Communications
a. Inspection Scope
The team reviewed the plant communications systems that would be relied upon to support safe shutdown, fire event notification, and fire brigade fire fighting activities. The team assessed selected fire brigade sites for portable radio storage to verify proper operation and effectiveness of communications during fire events and to identify any operational or performance problems with radio communications. The team assessed the capability of the sound powered phones and reviewed cable routing for plant radios and plant phones to verify that communication equipment would not be affected by a fire.
The team requested a demonstration of the sound powered phones and periodic testing for the system as well.
b. Findings
No findings of significance were identified.
.08 Emergency Lighting
a. Inspection Scope
The team reviewed the adequacy of the emergency lighting units (ELUs) used to support plant personnel during post-fire safe shutdown for the selected FAs. The team performed plant walkdowns and observed the placement and coverage area of fixed 8-hour battery pack emergency lights throughout the selected FAs to evaluate their adequacy for illuminating access and egress pathways and any equipment requiring local operation and/or instrumentation monitoring for post-fire SSD. The team observed random testing of select emergency lighting to verify the functionality. The team also reviewed other lighting systems used in the plant such as the diesel lighting system, and the LD lighting circuit powered from the 125V Vital Battery Boards.
The team observed whether emergency exit lighting was provided for personnel evacuation pathways to the outside exists as identified in NFPA 101, Life Safety Code, and the Occupational Safety and Health Administration (OSHA) Part 1910, Occupational Safety and Health Standards. This review also included examination of whether backup ELUs were provided for the primary and secondary fire emergency equipment storage locker locations and dress-out areas in support of fire brigade operations should power fail during a fire emergency.
The team reviewed the design, operation, and testing of the ELUs to verify that they met the requirements of 10 CFR 50, Appendix R, Section III.J. The team also reviewed manufacturers data sheets to check if they had at least an 8-hour capacity and the recommended maintenance was being performed. Copies of the last two performances of the 8-hour discharge test (conducted at 18 month interval) and the inspection/cleaning (conducted quarterly) were reviewed. In cases where an ELU failed the surveillance test, the team followed up on the corrective action and programmatic treatment. A sample of work requests written to replace ELUs which failed the surveillance was reviewed to confirm that the work was timely completed.
b. Findings
No findings of significance were identified.
.09 Cold Shutdown Repairs
a. Inspection Scope
The team reviewed the licensees safe shutdown procedures to determine if any repairs were necessary to achieve cold shutdown. The team also verified inventory in support of operations should cold shutdown repairs be necessary during a fire emergency. The team verified that the licensee had adequate measures described in Abnormal Operating Procedures AOP-C.04 Shutdown from Auxiliary Control Room and AOP-N.08 Appendix R Fire Safe Shutdown for achieving cold shutdown operations. The team also independently verified equipment, tools, and supplies used for repairing equipment, following a fire, and needed to bring the units from hot standby to cold shutdown.
b. Findings
No findings of significance were identified.
10. Compensatory Measures
a. Inspection Scope
The team reviewed the administrative controls for out-of-service, degraded, and/or inoperable, fire protection features (e.g., detection and suppression systems and equipment, passive fire barriers, or pumps, valves or electrical devices providing post-fire safe shutdown functions or capabilities). The team reviewed selected fire protection impairment permits and compared them with the conditions and actions required in their fire protection program for degraded fire protection components. The compensatory measures that had been established in these impairments were compared to those specified for the applicable fire protection feature to verify that the risk associated with removing the fire protection feature from service was properly assessed and adequate compensatory measures were implemented in accordance with the approved FPP.
Additionally, the team reviewed the licensees short term compensatory measures (compensatory fire watches) to verify that they were adequate to compensate for a degraded function or feature until appropriate corrective action could be taken and that the licensee was effective in returning the equipment to service in a reasonable period of time.
According to previously generated PER 145212, a fire watch was in place as part of a compensatory measure for a degraded Thermo-Lag fire barrier located on elevation 690 of the Auxiliary Building (Room 690.0-A1, Fire Area FAA-029). The fire watch was observed on one of his rounds in the area of concern. No issues were identified with the conduct or observations made by the fire watch for this degraded barrier.
b. Findings
No findings of significance were identified.
11. Control of Combustibles and Ignition Sources
a. Inspection Scope
The team reviewed the administrative control of combustible materials and ignition sources. Plant administrative procedures were reviewed to determine if adequate controls were in place to control the handling of in-situ and transient combustibles in the plant. The team inspected numerous areas in the plant for control of combustible materials, storage of in-plant materials, transient combustibles and general housekeeping. Plant materials appeared to be stored in heavy gauge steel containers with lids or doors to preclude the potential to involve these materials in a potential fire.
Adequate controls were in place to control hot work in order to control the potential for ignition sources. There were no hot work activities ongoing during the inspection so that observation of this activity could not be performed.
b. Findings
No findings of significance were identified.
OTHER ACTIVITIES
4OA2 Identification and Resolution of Problems
a. Inspection Scope
The team reviewed recent independent licensee audits for thoroughness, completeness and conformance to requirements. Requirements for the independent audits are contained in Regulatory Guide 1.189, Fire Protection for Operating Nuclear Power Plants, Generic Letter 82-21, Technical Specifications for Fire Protection Audits, and the licensees Nuclear Quality Assurance Plan. The team reviewed Nuclear Assessment Audits SSA 0501, dated June 1, 2005, and SSA 0605, dated April 27, 2007. Both these audits were triennial scope audits.
b. Findings and Observations
No findings of significance were identified. The licensees program for independent audits was to perform biennial audits, which have the scope of triennial audits as defined in Generic Letter 82-21. These audits were complete and comprehensive, and identified a number of problems, which were entered into the licensees corrective action program.
The 2005 audit, SSA 0501, identified an issue with the ability to carry out operator actions within the time frame of the limiting analysis. The level B PER, which requires a root cause analysis, was processed to address this issue.
4OA5 Other
(Open) URI 05000327, 328/2005011-06, Potential for Fire Damage to Spuriously Open a Containment Sump Isolation Valve.
The licensees actions in relation to this URI were reviewed as well as the risk significance of the issue. The URI was originally established for the NRC to review the licensing basis related to multiple intra-cable short-circuits. The technical issue involved two fire-induced short-circuits within a multi-conductor control cable for flow control valve FCV-63-73 which could cause the valve to spuriously open and provide a flow path from the reserve water storage tank the containment sump. In the case of FCV-63-73, no single short-circuit within the control cables could cause spurious operation. Review of the licensees circuit analysis documents revealed that the licensees design basis was to design against one inter-cable short-circuit. Their design basis documents stated that two simultaneous short-circuits between specific sets of conductors, while other conductors in the same cable remained intact was not a credible event. The licensee stated that this approach had been reviewed and approved by the NRC and, therefore, was their licensing basis. The licensee did not present any documents that supported this licensing basis contention. NRC Regulatory Information Summary (RIS) 2004-03, Rev.1, states that for any individual multi-conductor cable the fire-induced short-circuiting of any combination of conductors, regardless of number, may be postulated. This statement was based on the results of fire testing of cables that demonstrated that such an occurrence was credible as it actually occurred during the testing.
During the inspection, the inspector reviewed the control circuit in question and confirmed that it would take two short-circuits to produce the spurious operation. The inspector also made an in-plant inspection of the route of the cables in question. The cable ran from a motor control center in the auxiliary building to the main control room.
This revealed that the only ignition sources in the vicinity of the cables were the particular motor control center section from which the circuit emanates and the control panel in the main control room where the valve control switch is located. The inspector, in consultation with the Senior Reactor Analyst, performed a qualitative analysis of the risk significance of the postulated scenario, i.e. fire-induced short-circuit results in spurious opening of valve FCV-63-73, incorporating the facts obtained during the inspection. The following would tend to make the finding very low safety significance:
One ignition source in the auxiliary building portion of the route.
An isolation transfer switch was provided to isolate the circuit from the control building.
The relatively low probability of the postulated failure mode involving spurious actuation, two smart short-circuits in a circuit powered from a control transformer, which testing showed was the least likely type of control circuit to sustain a spurious operation.
Fire at the motor control center in question would damage only a few circuits, and recovery from reserve water storage tank drain down to the containment sump would be possible.
The inspectors, in consultation with the Nuclear Reactor Regulation (NRR) program office for fire protection, concluded that characterization of this issue in terms of a performance deficiency or violation should wait until the generic industry issue of multiple spurious operations is resolved. Therefore this URI will remain open.
(Closed) URI 05000327, 328/2005011-03, Sprinklers Apparently too far below Ceiling in Cable Spreading Room
Introduction:
A green NCV of Unit 1 License Condition 16 and Unit 2 License Condition 13, Fire Protection, was identified for failure to install the automatic suppression system (sprinkler system) in the cable spreading room according to the applicable National Fire Protection Association (NFPA) standard with regard to the ceiling to sprinkler head dimension. As a result, the actuation of the fusible link type sprinkler heads may be significantly slower than originally intended after fire ignition.
Description:
This unresolved item concerning the design of the sprinkler system in the cable spreading room (room number 706.0-C2) was opened at the time of the 2005 triennial fire protection inspection for two reasons:
- (1) to determine if the as-built configuration had been approved by the NRC, and
- (2) to review the capacity and capability of the as-built configuration to suppress fires.
The team reviewed of all the licensing basis documents listed in License Condition 16 (Unit 1) and License Condition 13 (Unit 2) and did not find that the NRC had reviewed and approved the sprinkler head to ceiling dimension, nor did the team find that the NRC approved a deviation from the NFPA code of record. Supplement 1 of NUREG 011 (a Safety Evaluation Report), Section 9.5. II.A, states that the sprinkler systems are installed in accordance with NFPA Standard 13. Supplement 1, Section 9.5.IV, states that the cable spreading room has an automatic pre-action sprinkler system and a manual total flooding carbon dioxide system. These and other documents reviewed are listed in the Attachment to this report. The conclusion from the review of historical documents was that there is no documented approval of a sprinkler system in the cable spreading room or any other room deviating from the NFPA codes with regard to the sprinkler head to ceiling dimension.
The cable spreading room is installed directly below the dual unit control room. It contains the vast majority of cables running between points in the plant and the control room. The floor area of the room is approximately 219 feet by 42 feet and the height is 25 feet. There is one north-south girder running 219 feet down the center of the room and beams running perpendicular to the girder. A typical beam was measured by the team at 22 1/2 inches deep. A typical pocket formed by the girder and beams is 21 feet by 6 1/2 feet (136.5 sq. ft.), although some are 21 by 8 (168 sq. ft.). Sprinkler heads are installed at two levels. Sprinklers at the upper level are about 30 inches below the ceiling or about 22 - 6 from the floor. Their spacing varies but there is a maximum of 10 feet between sprinklers. There are two levels of sprinklers. Sprinklers at the lower level are about 12 feet from the floor. The lower level sprinkler heads are offset horizontally from the upper level. There are a total of 115 sprinkler heads in the upper group and 119 in the lower. All the sprinkler heads were fitted with square metal caps or covers of about 18 inches by 18 inches dimension just above the heads. The metal covers have edges turned down on three sides.
The type of construction for this room as defined by NFPA Std. 13-1975 is either beam and girder or panel. As such, the maximum specified distance of sprinkler heads below the ceiling is 16 inches or 18 inches, respectively. Therefore, the upper level sprinklers are 12 to 14 inches greater distance below the ceiling than specified in the NFPA standard. For panel construction the NFPA standard would allow a sprinkler head to be 22 inches below the ceiling if it is located directly below a beam rather than in a bay, but the sprinkler heads in the spreading room are in the bays and not directly below a beam. In terms of the horizontal distance between sprinkler heads and coverage requirements, the spacing of the upper level is within the NFPA Std 13 requirements.
According to design documents, the sprinkler heads are Model QE manufactured by Star Sprinkler Corp. which are UL approved (or equal). They are large orifice type, standard release, upright pendent with a 1/2 inch National Pipe Thread (NPT) connection, rated 212 degrees F, intermediate temperature class. They are fusible link type, brass or bronze body, designed to operate in less than one minute. Since the cable spreading room is an air conditioned room, a sprinkler head of a lower temperature rating should have been used. While the 212 degree F rating is not a definite code deviation, it results in a slower response, especially since the sprinkler heads are not at the recommended distance from the ceiling.
In conclusion, the sprinkler heads are installed at 30 inches below the ceiling which places them below the beams and below the ceiling jet. This installation results in a very slow system response, and does not meet NFPA Std 13-1975.
Analysis:
This finding is a performance deficiency because the licensee did not locate the sprinkler heads according to the applicable industry code of record for the facility.
The finding is more than minor because it is associated with the reactor safety, mitigating systems, cornerstone attribute of protection against external factors, i.e. fire, and it substantially affects the objective of ensuring reliability and capability of systems that respond to initiating events. The risk significance of the finding was determined using Manual Chapter (MC) 0609, Appendix F, Fire Protection Significance Determination Process. Pursuant to MC 0609, Appendix F, the finding category was fixed fire protection systems. The nature of the degradation of the water based suppression system is related to the response time of the system. The low placement of sprinklers together with the 212 degree F temperature rating of the sprinkler heads will result in a response time slower than that of a system that meets NFPA Std 13. A degradation rating of high, as defined by MC 0609, Appendix F, must be assigned since a moderate degradation rating cannot be supported by technical reasoning. The duration factor was equal to one. The ignition source of interest is non-IEEE Std 383 qualified cables. Since the performance deficiency affects the automatic fire suppression system and the ignition source of interest is non-qualified cable, there is no obvious fire damage target. Therefore, a worst case scenario involving a loss of offsite power and shutdown from the auxiliary control room was evaluated to determine the significance. No credit was given for fire suppression since it could not be assured that a fire could be suppressed before operators would have to make the decision to implement the alternate shutdown procedure. This is based on the facts that the response time of the suppression system could be very long, the postulated fire is a self-ignited cable, and manual suppression would be delayed due to the difficulty in pinpointing the exact location of the fire in a large room. The generic fire frequency for self-ignited cable fires given in MC 0609, Appendix F, was adjusted with a weighing factor in accordance with
5. An initiating event likelihood of 1.4 E-4 was conservatively assigned.
Once the initiating event likelihood was determined, the significance determination process worksheet for loss of offsite power was evaluated. A probability of failure of each safety function shown on the worksheet was assigned considering the operational lineup dictated by Abnormal Operating Procedure AOP-C.04, Shutdown from Auxiliary Control Room. This procedure requires local operator actions to be performed to accomplish certain functions which would otherwise be automatic functions, and failure probabilities were assigned accordingly. The result of the analysis was that the finding was of very low safety significance, Green.
Enforcement:
Sequoyah License Condition 16 for Unit 1 and License Condition 13, Fire Protection, for Unit 2 require that TVA implement and maintain in effect all provisions of the approved fire protection program referenced in the Sequoyah Nuclear Plants Final Safety Analysis Report (FSAR). FSAR Section 9.5.1.1 states that the Fire Protection System and fire protection features are described in the FPR. The FPR, Part II, Section 14.3, Page 54, requires that the sprinkler system for the cable spreading room be operable. The FPR, Part VI, Section 3.3 states that NFPA 13-1975, Automatic Sprinkler Systems, is the code used to evaluate the adequacy of the sprinkler systems. NFPA 13, Section 4-3.2.2 (beam and girder construction) states that sprinklers shall be located not more than 20 inches below floor decks and Section 4-3.4.2 (panel construction) states that sprinklers shall be located not more than 22 inches below the floor deck.
Contrary to the above, the cable spreading room has either beam and girder or panel construction and the sprinklers are located 30 inches below the floor deck. Because this finding is of very low safety significance and has been entered into the corrective action program as PER 147467, this finding is being treated as a non-cited violation (NCV),consistent with Section VI.A.1 of the NRCs Enforcement Policy. This finding is identified as NCV 05000327, 328/2008006-03, Sprinklers too far below Ceiling in Cable Spreading Room.
(Closed) URI 05000327, 328/2005011-07, Potential for Fire Damage to Spuriously Close the Charging Header Flow Control Valve Flow control valve FCV-62-93 in the chemical and volume control system (CVCS) is an air operated valve. Its position in the CVCS is at the discharge of the charging pumps, and its spurious closure would shut off all flow to the reactor coolant pump (RCP) seals.
The safe shutdown strategy is to maintain flow to the RCP seals (or re-establish flow within 13 minutes). Make-up to the reactor coolant system would be via seal injection.
The normal charging path is shut off by operators in accordance with the SSD procedure.
Air-operated valve FCV-62-93 would fail in the open position (the desired position) on loss of air or loss of electrical signal. However, the valve position is controlled with an instrumentation controller. The instrumentation loop works on a 10 - 50 milliampere signal: 10 milliamperes to open and 50 milliamperes to close. The instrumentation cables to the valve are shielded twisted pairs with drain wire and cross-linked polyethylene insulation with polyvinyl chloride jacket. The cables run in cable tray with other similar type cables carrying 10 - 50 milliampere signals. The URI was established to evaluate the possibility/credibility that a fire-induced cable to cable interaction could inject 50 milliamperes from a cable carrying 50 milliamperes into the target cable and cause the valve to close.
The team determined that the failure mode described above was not a credible failure mode for design consideration. Regulatory Issues Summary (RIS) 2004-03 documented the results of testing of fire-induced cable failures sponsored by the Nuclear Energy Institute and the Electric Power Research Institute. This testing and the RIS indicate that cable to cable interactions need not be postulated between two cables having thermosetting insulation such as cross-linked polyethylene. Evaluation of the equivalent electric circuit modeling the postulated cable interaction including the instrument loop components leads to the conclusion that 50 millampers carried by an aggressor cable would split between the aggressor and target circuits, and therefore it would be impossible for the valve to receive a full close signal. The URI is closed with no finding.
4OA6 Meetings, Including Exit
On June 27, 2008, the lead inspector presented the inspection results to Mr. T. Cleary, Site Vice President, and other members of the licensees staff. Post-inspection in-office reviews and analysis of significance of findings resolved certain open issues, and the final results of the inspection were presented to Mr. T. Cleary and other members of the licensees staff on August 8, 2008. The licensee acknowledged the findings. Proprietary information is not included in this report.
SUPPLEMENTAL INFORMATION
KEY POINTS OF CONTACT
Licensee Personnel
- J. Campbell, Electrical Design Manager
- M. Casner, Engineering Design Manager
- C. Church, Plant Manager
- T. Cleary, Site Vice President
- L. Cross, Maintenance manager
- R. Egli, Engineering Programs Engineer
- M. Hicks, Performance Improvement Manager
- K. Jones, Manager Site Engineering
- P. Johnson, Fire Protection Supervisor
- D. Porter, Operations Procedure Writer
- R. Proffitt, Licensing Engineer
- P. Simmons, Operations Manager
- J. Smith, Licensing Manager
- E. Turner, Electrical Design Engineer
- G. Vickery, Manager Nuclear Assurance
NRC Personnel
- H. Barrett, Engineer, Fire Protection Branch, NRR
- K. Kennedy, Director, Division of Reactor Safety, Region II
- R. Nease, Branch Chief, Engineering Branch 2, Region II
- C. Young, Senior Resident Inspector, Sequoyah Nuclear Plant
LIST OF ITEMS
OPENED, CLOSED AND DISCUSSED
Opened
- 05000327, 328/2008006-02 URI Sprinkler System in Room 690.0-A1 of the Auxiliary Building has NFPA Code Deviation (1R05.03.b (1))
Opened and Closed
- 05000328/2008006-01 NCV Fire Detectors in 480 V Shutdown Board Room 2B2 Not Installed According to NFPA Code (1R05.03.b (2))
- 05000327, 328/2008006-03 NCV Sprinklers too far below Ceiling in Cable Spreading Room (4OA5)
Closed
- 05000327, 328/2005011-03 URI Sprinklers Apparently too far below Ceiling in Cable Spreading Room (4OA5)
- 05000327, 328/2005011-07 URI Potential for Fire Damage to Spuriously Close the Charging Header Flow Control Valve (4OA5)
Discussed
- 05000327, 328/2005011-06 URI Potential for Fire damage to Spuriously Open a Containment Sump Isolation Valve (4OA5)
LIST OF COMPONENTS INSPECTED (Refer Report Section 1RO5.06 Circuit Analysis)
1-FCV-062-054 Excess Letdown Isolation Valve 1-FCV-062-055 Excess Letdown Isolation Valve 1-FCV-062-056 Excess Letdown Isolation Valve 1-LCV-062-133 Volume Control Tank Outlet Isolation Valve 2-LCV-062-132 Volume Control Tank Outlet Isolation Valve 2-LCV-062-133 Volume Control Tank Outlet Isolation Valve 2-PMP-003-118 Motor driven Auxiliary Feedwater Pump A 2-PMP-003-128 Motor Driven Auxiliary Feedwater Pump B 1-PMP-003-142 Turbine Driven Auxiliary Feedwater Pump 1-PCV-001-012 Loop 2 Atmospheric Relief Valve 1-PCV-001-023 Loop 3 Atmospheric Relief Valve 2-PCV-001-012 Loop 2 Atmospheric Relief Valve 2-PCV-001-023 Loop 3 Atmospheric Relief Valve 1-FCV-068-332 Pressurizer Relief Block Valve 1-PCV-068-334 Pressurizer Power Operated Relief Valve 2-FCV-068-332 Pressurizer Relief Block Valve 2-FCV-068-333 Pressurizer Relief Block Valve 2-FSV-068-396 Reactor Vessel Head Vent Throttle Valve 2-FSV-068-397 Reactor Vessel Head Vent Throttle Valve 1-FCV-062-093 Charging Flow Control Valve & Flow Indicator 1-T-068-001 Loop #1 Hot Leg Temperature 1-T-068-065 Loop #4 Hot Leg Temperature 2-L-003-171 Steam Generator #4 Narrow Range Level 2-T-068-001 Loop #1 Hot Leg Temperature 2-T-068-065 Loop #1 Hot Leg Temperature