Text

License Amendment, Issuance of Amendment Risk-Informed Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program
	ML113430851
Person / Time
Site:	FitzPatrick
Issue date:	02/14/2012
From:	Bhalchandra Vaidya; Plant Licensing Branch 1
To:	; Entergy Nuclear Operations
	vaidya B, NRR/Dorl/lpl1-1, 415-3308
References
	TAC ME6755
	Download: ML113430851 (141)
	v • d • e

UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 February 14, 2012 Vice President, Operations Entergy Nuclear Operations, Inc.

James A. FitzPatrick Nuclear Power Plant P.O. Box 110 Lycoming, NY 13093

SUBJECT:

JAMES A. FITZPATRICK NUCLEAR POWER PLANT - ISSUANCE OF AMENDMENT RE: RISK-INFORMED JUSTIFICATION FOR THE RELOCATION OF SPECIFIC SURVEILLANCE FREQUENCY REQUIREMENTS TO A LICENSEE CONTROLLED PROGRAM (TAC NO. ME6755)

Dear Sir or Madam:

The Commission has issued the enclosed Amendment No. 301 to Renewed Facility Operating License No. DPR-59 for the James A. FitzPatrick Nuclear Power Plant. The amendment consists of changes to the Technical Specifications (TSs) in response to your application dated July 22, 2011, as supplemented by letter dated October 19, 2011.

The amendment modifies the TS by relocating specific Surveillance Frequencies to a licensee controlled program with the adoption of Technical Specification Task Force (TSTF)-425, Revision 3, "Relocate Surveillance Frequencies to Licensee Control-Risk Informed Technical Specification Task Force (RITSTF) Initiative 5b." The existing Bases information describing the basis for the Surveillance Frequency will be relocated to the licensee-controlled Surveillance Frequency Control Program. Additionally, the change adds a new program TS 5.5.15, "Surveillance Frequency Control Program," to TS Section 5.5, "Programs and Manuals."

A copy of the related Safety Evaluation is enclosed. A Notice of Issuance will be included in the Commission's next regular biweekly Federal Register notice.

Sincerely, Bhalchandra K. Vaidya, Project Manager Plant Licensing Branch 1-1 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-333

Enclosures:

1. Amendment No. 301 to DPR-59

2. Safety Evaluation cc w/encls: Distribution via Listserv

UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 ENTERGY NUCLEAR FITZPATRICK, LLC AND ENTERGY NUCLEAR OPERATIONS, INC.

DOCKET NO. 50-333 JAMES A. FITZPATRICK NUCLEAR POWER PLANT AMENDMENT TO RENEWED FACILITY OPERATING LICENSE Amendment No. 301 Renewed Facility Operating License No. DPR-59

1. The Nuclear Regulatory Commission (the Commission) has found that:

A. The application for amendment by Entergy Nuclear Operations, Inc. (the licensee) dated July 22, 2011, as supplemented on October 19, 2011, complies with the standards and requirements of the Atomic Energy Act of 1954, as amended (the Act) and the Commission's rules and regulations set forth in 10 CFR Chapter I; B. The facility will operate in conformity with the application, the provisions of the Act, and the rules and regulations of the Commission; C. There is reasonable assurance (i) that the activities authorized by this amendment can be conducted without endangering the health and safety of the public, and (ii) that such activities will be conducted in compliance with the Commission's regulations; D. The issuance of this amendment will not be inimical to the common defense and security or to the health and safety of the public; and E. The issuance of this amendment is in accordance with 10 CFR Part 51 of the Commission's regulations and all applicable requirements have been satisfied.

2. Accordingly, the license is amended by changes to the Technical Specifications as indicated in the attachment to this license amendment, and paragraph 2.C.(2) of Renewed Facility Operating License No. DPR-59 is hereby amended to read as follows:

-2 (2) Technical Specifications The Technical Specifications contained in Appendix A, as revised through Amendment No. 301 are hereby incorporated in the renewed facility operating I

license. The licensee shall operate the facility in accordance with the Technical Specifications.

3. This license amendment is effective as of the date of its issuance and shall be implemented within 120 days.

FOR THE NUCLEAR REGULATORY COMMISSION

~ '-V\..........._ J George A. ~ief Plant Licensing Branch 1-1 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation

Attachment:

Changes to the Renewed Facility Operating License and Technical Specifications Date of Issuance: February 14. 2012

ATTACHMENT TO LICENSE AMENDMENT NO. 301 RENEWED FACILITY OPERATING LICENSE NO. DPR-59 DOCKET NO. 50-333 Replace the following page of the License with the attached revised page. The revised page is identified by amendment number and contains marginal lines indicating the areas of change.

Remove Page Insert Page Page 3 Page 3 Replace the following pages of the Appendix A Technical Specifications with the attached revised pages. The revised pages are identified by amendment number and contain marginal lines indicating the areas of change.

Remove Pages Insert Pages 3.1.3-4 3.1.3-4 3.1.4-2 3.1.4-2 3.1.5-3 3.1.5-3 3.1.6-2 3.1.6-2 3.1.7-2 3.1.7-2 3.1.7-3 3.1.7-3 3.1.7-4 3.1.7.4 3.1.8-2 3.1.8-2 3.2.1-1 3.2.1-1 3.2.2-1 3.2.2-1 3.2.3-1 3.2.3-1 3.3.1.1-3 3.3.1.1-3 3.3.1.1-4 3.3.1.1-4 3.3.1.1-5 3.3.1.1-5 3.3.1.2-2 3.3.1.2-2 3.3.1.2-3 3.3.1.2-3 3.3.1.2-4 3.3.1.2-4 3.3.2.1-3 3.3.2.1-3 3.3.2.1-4 3.3.2.1-4 3.3.2.1-5 3.3.2.1-5 3.3.2.2-1 3.3.2.2-1 3.3.2.2-2 3.3.2.2-2 3.3.2.2-3 3.3.3.1-2 3.3.3.1-2 3.3.3.1-3 3.3.3.1-3 3.3.3.2-2 3.3.3.2-2 3.3.4.1-3 3.3.4.1-3 3.3.5.1-7 3.3.5.1-7 3.3.5.2-3 3.3.5.2-3 3.3.6.1-4 3.3.6.1-4 3.3.6.1-5 3.3.6.1-5

-2 Remove Pages Insert Pages 3.3.6.1-4 3.3.6.1-4 3.3.6.1-5 3.3.6.1-5 3.3.6.2-2 3.3.6.2-2 3.3.6.2-3 3.3.6.2-3 3.3.7.1-2 3.3.7.1-2 3.3.7.2-2 3.3.7.2-2 3.3.7.2-3 3.3.7.2-3 3.3.7.3-2 3.3.7.3-2 3.3.8.1-2 3.3.8.1-2 3.3.8.2-2 3.3.8.2-2 3.3.8.2-3 3.3.8.2-3 3.4.1-3 3.4.1-3 3.4.2-2 3.4.2-2 3.4.4-2 3.4.4-2 3.4.5-3 3.4.5-3 3.4.6-2 3.4.6-2 3.4.7-2 3.4.7-2 3.4.8-1 3.4.8-1 3.4.8-2 3.4.9-3 3.4.9-3 3.4.9-5 3.4.9-5 3.4.9-6 3.4.9-6 3.5.1-3 3.5.1-3 3.5.1-4 3.5.1-4 3.5.1-6 3.5.1-6 3.5.2-2 3.5.2-2 3.5.2-3 3.5.2-3 3.5.2-4 3.5.2-4 3.5.3-2 3.5.3-2 3.5.3-3 3.5.3-3 3.6.1.1-2 3.6.1.1-2 3.6.1.2-4 3.6.1.2-4 3.6.1.3-7 3.6.1.3-7 3.6.1.3-8 3.6.1.3-8 3.6.1.3-9 3.6.1.3-9 3.6.1.4-1 3.6.1.4-1 3.6.1.5-1 3.6.1.5-1 3.6.1.6-2 3.6.1.6-2 3.6.1.6-3 3.6.1.6-3 3.6.1.7-2 3.6.1.7-2 3.6.1.8-2 3.6.1.8-2 3.6.1.9-2 3.6.1.9-2 3.6.2.1-3 3.6.2.1-3 3.6.2.2-1 3.6.2.2-1 3.6.2.3-2 3.6.2.3-2 3.6.2.4-2 3.6.2.4-2

-3 Remove Pages Insert Pages 3.6.3.1-1 3.6.3.1-1 3.6.3.2-2 3.6.3.2-2 3.6.4.1-2 3.6.4.1-2 3.6.4.2-4 3.6.4.2-4 3.6.4.3-3 3.6.4.3-3 3.7.1-2 3.7.1-2 3.7.2-2 3.7.2-2 3.7.2-3 3.7.2-3 3.7.2-4 3.7.2-4 3.7.3-3 3.7.3-3 3.7.4-3 3.7.4-3 3.7.5-2 3.7.5-2 3.7.6-2 3.7.6-2 3.7.7-1 3.7.7-1 3.8.1-4 3.8.1-4 3.8.1-5 3.8.1-5 3.8.1-6 3.8.1-6 3.8.1-7 3.8.1-7 3.8.1-8 3.8.1-8 3.8.1-9 3.8.1-9 3.8.1-10 3.8.1-10 3.8.1-11 3.8.3-2 3.8.3-2 3.8.3-3 3.8.3-3 3.8.4-3 3.8.4-3 3.8.4-4 3.8.4-4 3.8.6-2 3.8.6-2 3.8.6-3 3.8.6-3 3.8.7-2 3.8.7-2 3.8.8-2 3.8.8-2 3.9.1-2 3.9.1-2 3.9.2-1 3.9.2-1 3.9.2-2 3.9.3-1 3.9.3-1 3.9.5-1 3.9.5-1 3.9.6-1 3.9.6-1 3.9.7-2 3.9.7-2 3.9.8-2 3.9.8-2 3.10.2-2 3.10.2-2 3.10.3-3 3.10.3-3 3.10.4-3 3.10.4-3 3.10.4-4 3.10.4-4 3.10.5-2 3.10.5-2 3.10.5-3 3.10.6-2 3.10.6-2 3.10.8-3 3.10.8-3 3.10.8-4 3.10.8-4 5.5-15 5.5-15

-3 (4) ENO pursuant to the Act and 10 CFR Parts 30, 40, and 70 to receive, possess, and use, at any time, any byproduct, source and special nuclear material without restriction to chemical or physical form, for sample analysis or instrument calibration; or associated with radioactive apparatus, components or tools ..

(5) Pursuant to the Act and 10 CFR Parts 30 and 70, to possess, but not separate, such byproduct and special nuclear materials as may be produced by the operation of the facility.

C. This renewed operating license shall be deemed to contain and is subject to the conditions specified in the following Commission regulations in 10 CFR Chapter I: Part 20, Section 30.34 of Part 30, Section 40.41 of Part 40, Sections 50.54 and 50.59 of Part 50, and Section 70.32 of Part 70; and is subject to all applicable provisions of the Act and to the rules, regulations, and orders of the Commission now or hereafter in effect; and is subject to the additional conditions specified or incorporated below:

(1) Maximum Power Level ENO is authorized to operate the facility at steady state reactor core power levels not in excess of 2536 megawatts (thermal).

(2) Technical Specifications The Technical Specifications contained in Appendix A, as revised through Amendment No. 301, are hereby incorporated in the renewed operating license.

The licensee shall operate the facility in accordance with the Technical Specifications.

(3) Fire Protection ENO shall implement and maintain in effect all provisions of the approved fire protections program as described in the Final Safety Analysis Report for the facility and as approved in the SER dated November 20, 1972; the SER Supplement No.1 dated February 1, 1973; the SER Supplement No.2 dated October 4, 1974; the SER dated August 1, 1979; the SER Supplement dated October 3, 1980; the SER Supplement dated February 13, 1981; the NRC Letter dated February 24, 1981; Technical Specification Amendments 34 (dated January 31, 1978), 80 (dated May 22, 1984), 134 (dated July 19, 1989), 135 (dated September 5, 1989), 142 (dated October 23,1989),164 (dated August 10,1990), 176 (dated January 16,1992),177 (dated February 10,1992),186 (dated February 19,1993),190 (dated June 29,1993),191 (dated July 7,1993),206 (dated February 28,1994) and 214 (dated June 27,1994); and NRC Exemptions and associated safety evaluations dated April 26, 1983, July 1,1983, January 11, 1985, April 30, 1986, September 15, 1986 and September 10, 1992 subject to the following provision:

Amendment 301 I

Control Rod OPERABILITY 3.1.3 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.1.3.1 Determine the position of each control rod. In accordance with the Surveillance Frequency Control Program SR 3.1.3.2 - - - - - - - - - - - NOTE- - - - - - - - - - - - - -

Not required to be performed until 31 days after the control rod is withdrawn and THERMAL POWER is greater than the LPSP of the RWM.

Insert each withdrawn control rod at least one notch. In accordance with the Surveillance Frequency Control Program SR 3.1.3.3 Verify each control rod scram time from fully withdrawn In accordance with to notch position 04 is ::;; 7 seconds. SR 3.1.4.1, SR 3.1.4.2, SR 3.1.4.3, and SR 3.1.4.4 SR 3.1.3.4 Verify each control rod does not go to the withdrawn Each time the overtravel position. control rod is withdrawn to "full out" position Prior to declaring control rod OPERABLE after work on control rod or CRD System that could affect coupling JAFNPP 3.1.3-4 Amendment 301 I

Control Rod Scram Times 3.1.4 SURVEILLANCE REQUIREMENTS (continued)

SURVEI LLANCE FREQUENCY SR 3.1.4.2 Verify, for a representative sample, each tested In accordance control rod scram time is within the limits of with the Table 3.1.4-1 with reactor steam dome pressure Surve ill a nce

~ 800 psig. Frequency Control Program SR 3.1.4.3 Verify each affected control rod scram time is within Prior to declaring the limits of Table 3.1.4-1 with any reactor steam control rod dome pressure. OPERABLE after work on control rod or CRD System that could affect scram time SR 3.1.4.4 Verify each affected control rod scram time is within Prior to exceeding the limits of Table 3.1.4-1 with reactor steam dome 40% RTP after pressure ~ 800 psig. fuel movement within the affected core cell Prior to exceeding 40% RTP after work on control rod or CRD System that could affect scram time JAFNPP 3.1.4-2 Amendment 301 I

Control Rod Scram Accumulators 3.1.5 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME C. (continued) C.2 Declare the associated 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months control rod inoperable.

D. Required Action 8.1 or C.1 D.1 - - - - - - - NOTE- - - - - - -

and associated Completion Not applicable if all Time not met. inoperable control rod scram accumulators are associated with fully inserted control rods.

Place the reactor mode Immediately switch in the shutdown position.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.1.5.1 Verify each control rod scram accumulator In accordance with pressu re is ~ 940 psig. the Surveillance Frequency Control Program JAFNPP 3.1.5-3 Amendment 301 I

Rod Pattern Control 3.1.6 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME B. Nine or more OPERABLE B.1 - - - - - - - - NOTE - - - - - - -

control rods not in Rod worth minimizer compliance with BPWS. (RWM) may be bypassed as allowed by LCO 3.3.2.1.

Suspend withdrawal of Immediately control rods.

AND B.2 Place the reactor mode 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months switch in the shutdown position.

SURVEILLANCE REQUIREMENTS SU RVEI LLANCE FREQUENCY SR 3.1.6.1 Verify all OPERABLE control rods comply with BPWS. In accordance with the Surveillance Frequency Control Program JAFNPP 3.1.6-2 Amendment 301 I

SLC System 3.1.7 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.1.7.1 Verify available volume of sodium penta borate In accordance solution is within the limits of Figure 3.1.7-1. with the Surveillance Frequency Control Program SR 3.1.7.2 Verify temperature of sodium penta borate solution In accordance is within the limits of Figure 3.1.7-2. with the Surveillance Frequency Control Program SR 3.1.7.3 Verify temperature of pump suction piping is within In accordance the limits of Figure 3.1.7-2. with the Surve ill a nce Frequency Control Program SR 3.1.7.4 Verify continuity of explosive charge. In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.1.7-2 Amendment 301 I

SLCSystem 3.1.7 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.1.7.5 Verify the concentration of sodium pentaborate in In accordance with solution is within the limits of Figure 3.1.7-1. the Surveillance Frequency Control Program Once within 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after water or sodium penta borate is added to solution Once within 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after solution temperature is restored within the limits of Figure 3.1.7-2 SR 3.1.7.6 Verify each SLC subsystem manual valve in the flow path In accordance with that is not locked, sealed, or otherwise secured in the Surveillance position is in the correct position, or can be aligned to Frequency Control the correct position. Program SR 3.1.7.7 Verify each pump develops a flow rate ~ 50 gpm at a In accordance with discharge pressure ~ 1275 psig. the Inservice Testing Program SR 3.1.7.8 Verify flow through one SLC subsystem from pump into In accordance with reactor pressure vessel. the Surveillance Frequency Control Program (continued)

JAFNPP 3.1.7-3 Amendment 301 I

SLCSystem 3.1.7 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.1.7.9 Verify all heat traced piping between storage tank In accordance and pump suction is unblocked. with the Surveillance Frequency Control Program Once within 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after piping temperature is restored within the limits of Figure 3.1.7-2 SR 3.1.7.10 Verify sodium pentaborate enrichment is ~ 34.7 Prior to atom percent 8-10. addition to SLC tank SR 3.1.7.11 Verify sodium pentaborate enrichment in solution in In accordance the SLC tank is ~ 34.7 atom percent 8-10. with the Surveillance Frequency Control Program JAFNPP 3.1.7-4 Amendment 301 I

SDV Vent and Drain Valves 3.1.8 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.1.8.1 - - - - - - - - - - - - - - - - - -NOTE- - - - - - - - - - - - - - - -

Not required to be met on vent and drain valves closed during performance of SR 3.1.8.2.

Verify each SDV vent and drain valve is open. In accordance with the Surveillance Frequency Control Program SR 3.1.8.2 Cycle each SDV vent and drain valve to the fully In accordance with closed and fully open position. the Inservice Testing Program SR 3.1.8.3 Verify each SDV vent and drain valve: In accordance with the Surveillance

a. Closes in ~ 30 seconds after receipt of an Frequency Control actual or simulated scram signal; and Program

b. Opens when the actual or simulated scram signa I is reset.

JAFNPP 3.1.8-2 Amendment 301 I

APLHGR 3.2.1 3.2 POWER DISTRIBUTION LIMITS 3.2.1 AVERAGE PLANAR LINEAR HEAT GENERATION RATE (APLHGR)

LCO 3.2.1 All APLHGRs shall be less than or equal to the limits specified in the COLR.

APPLICABILITY: THERMAL POWER ~ 25% RTP.

ACTIONS

_ _ _--+_ _ _R_E_Q_U_IR_E_D_A_C_TI_O_N_ _ _~PLETION TIME

_ _ _ _C_O_N_D_IT_I_ON A. Any APLHGR not within A.l Restore APLHGR(s) to 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months limits. within limits.

B. Required Action and B.l Reduce THERMAL POWER 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months associated Completion to < 25% RTP.

Time not met.

SURVEILLANCE REQUIREMENTS SU RVEILLANCE FREQUENCY SR 3.2.1.1 Verify all APLHGRs are less than or equal to the Once within limits specified in the COLR. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after

~ 25% RTP In accordance with the Surveillance Frequency Control Program JAFNPP 3.2.1-1 Amendment 301 I

MCPR 3.2.2 3.2 POWER DISTRIBUTION LIMITS 3.2.2 MINIMUM CRITICAL POWER RATIO (MCPR)

LCO 3.2.2 All MCPRs shall be greater than or equal to the MCPR operating limits specified in the COLR.

APPLICABI LlTY: THERMAL POWER ~ 25% RTP.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Any MCPR not within limits. A.l Restore MCPR(s) to within 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months limits.

B. Required Action and B.l Reduce THERMAL POWER 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months associated Completion Time to < 25% RTP.

not met.

SURVEILLANCE REQUIREMENTS SU RVEI LLANCE FREQUENCY SR 3.2.2.1 Verify all MCPRs are greater than or equal to the limits Once within specified in the COLR. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after

~ 25% RTP In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.2.2-1 Amendment 301 I

LHGR 3.2.3 3.2 POWER DISTRIBUTION LIMITS 3.2.3 LINEAR HEAT GENERATION RATE (LHGR)

LCO 3.2.3 All LHGRs shall be less than or equal to the limits specified in the COLR.

APPLICABI LlTY: THERMAL POWER ~ 25% RTP.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Any LHGR not within limits. A.1 Restore LHGR(s) to 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months within limits.

B. Required Action and B.1 Reduce THERMAL 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months associated Completion POWER to < 25% RTP.

Time not met.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.2.3.1 Verify all LHGRs are less than or equal to the limits Once within specified in the COLR. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after

~ 25% RTP In accordance with the Surveillance Frequency Control Program JAFNPP 3.2.3-1 Amendment 301 I

RPS Instrumentation 3.3.1.1 SURVEILLANCE REQUIREMENTS

NOTES----------------------------------

1. Refer to Table 3.3.1.1-1 to determine which SRs apply for each RPS Function.

2. When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the associated Function maintains RPS trip capability.

SURVEILLANCE FREQUENCY SR 3.3.1.1.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.2 ---------------NOTE--------------

Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after THERMAL POWER ~ 25% RTP.

Verify the absolute difference between the average In accordance with power range monitor (APRM) channels and the the Surveillance calculated power is ~ 2% RTP while operating at ~ 25% Frequency Control RTP. Program SR 3.3.1.1.3 --------------NOTE--------------

Not required to be performed when entering MODE 2 from MODE 1 until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after entering MODE 2.

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.4 Perform a functional test of each RPS automatic scram In accordance with contactor. the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.1.1-3 Amendment 301 I

RPS Instrumentation 3.3.1.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.1.1.5 Verify the source range monitor (SRM) and Prior to fully intermediate range monitor (lRM) channels overlap. withdrawing SRMs SR 3.3.1.1.6 - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - -

Only required to be met during entry into MODE 2 from MODE 1.

Verify the IRM and APRM channels overlap. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.7 Calibrate the local power range monitors. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.8 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.9 - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - -

1. Neutron detectors are excluded.

2. For Functions 1.a and 2.a, not required to be performed when entering MODE 2 from MODE 1 until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after entering MODE 2.

3. For Function 2.b, the reCirculation loop flow signal portion ofthe channel is excluded.

Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.1.1-4 Amendment 301 I

RPS Instrumentation 3.3.1.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.1.1.10 Calibrate the trip units. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.11 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.12 - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - -

For Function 2.b, all portions of the channel except the recirculation loop flow signal portion are excluded.

Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.13 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.1.1.14 Verify Turbine Stop Valve-Closure and Turbine Control In accordance with Valve Fast Closure, EHC Oil Pressure-Low Functions the Surveillance are not bypassed when THERMAL POWER is Frequency Control

~29% RTP. Program SR 3.3.1.1.15 - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - -

1. Neutron detectors are excluded.

2. "n" equals 2 channels for the purpose of determining the STAGGERED TEST BASIS Frequency.

Verify the RPS RESPONSE TIME is within limits. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.1.1-5 Amendment 301 I

SRM Instrumentation 3.3.1.2 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. One or more required SRMs D.1 Fully insert all insertable 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months inoperable in MODE 3 or 4. control rods.

AND D.2 Place reactor mode switch 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months in the shutdown position.

E. One or more required SRMs E.1 Suspend CORE Immediately inoperable in MODE 5. ALTERATIONS except for control rod insertion.

AND E.2 Initiate action to fully Immediately insert all insertable control rods in core cells containing one or more fuel assemblies.

SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Refer to Table 3.3.1.2-1 to determine which SRs apply for each applicable MODE or other specified condition.

SU RVEI LLANCE FREQUENCY SR 3.3.1.2.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.1.2-2 Amendment 301 I

SRM Instrumentation 3.3.1.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.1.2.2 - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - *. - *

1. Only required to be met during CORE ALTERATIONS.

2. One SRM may be used to satisfy more than one of the following.

Verify an OPERABLE SRM detector is located in: In accordance with the Surveillance

a. The fueled region; Frequency Control Program

b. The core quadrant where CORE ALTERATIONS are being performed, when the associated SRM is included in the fueled region; and

c. A core quadrant adjacent to where CORE ALTERATIONS are being performed, when the associated SRM is included in the fueled region.

SR 3.3.1.2.3 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.1.2.4 - - - - - - - - - - - - . - - - - - - - NOTE - - - - - - ** - - - - - - - -

Not required to be met with less than or equal to four fuel assemblies adjacent to the SRM and no other fuel assemblies in the associated core quadrant.

Verify count rate is ~ 3.0 cps with a signal to noise In accordance with ratio ~ 2:1. the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.1.2-3 Amendment 301 I

SRM Instrumentation 3.3.1.2 SURVEILLANCE REQUIRMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.1.2.5 - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - -

The determination of signal to noise ratio is not required to be met with less than or equal to four fuel assemblies adjacent to the SRM and no other fuel assemblies in the associated core quadrant.

Perform CHANNEL FUNCTIONAL TEST and In accordance with determination of signal to noise ratio. the Surveillance Frequency Control Program SR 3.3.1.2.6 - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - -

Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after IRMs on Range 2 or below.

Perform CHANNEL FUNCTIONAL TEST and In accordance with determination of signal to noise ratio. the Surveillance Frequency Control Program SR 3.3.1.2.7 ---------------------NOTE------------------

1. Neutron detectors are excluded.

2. Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after IRMs on Range 2 or below.

Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.1.2-4 Amendment 301 I

Control Rod Block Instrumentation 3.3.2.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME E. One or more Reactor Mode E.1 Suspend control rod Immediately Switch-Shutdown Position withdrawal.

channels inoperable.

E.2 Initiate action to fully Immediately insert all insertable control rods in core cells containing one or more fuel assemblies.

SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - -

1. Refer to Table 3.3.2.1-1 to determine which SRs apply for each Control Rod Block Function.

2. When an RBM channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the associated Function maintains control rod block capability.

SURVEILLANCE FREQUENCY SR 3.3.2.1.1 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.2.1.2 - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - -

Not required to be performed until 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months after any control rod is withdrawn at :s; 10% RTP in MODE 2.

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.2.1-3 Amendment 301 I

Control Rod Block Instrumentation 3.3.2.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.2.1.3 - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - -

Not required to be performed until 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months after THERMAL POWER is :5: 10% RTP in MODE 1.

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.2.1.4 - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - -

Neutron detectors are excluded.

Verify the RBM is not bypassed: In accordance with the Surveillance

a. When THERMAL POWER is ~ 30% RTP; and Frequency Control Program

b. When a peripheral control rod is not selected.

SR 3.3.2.1.5 ---------------------NOTE------------------

1. Neutron detectors are excluded.

2. For Function 1.a, the recirculation loop flow signal portion of the channel is excluded.

Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.2.1.6 Verify the RWM is not bypassed when THERMAL In accordance with POWER is:5: 10% RTP. the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.2.1-4 Amendment 301 I

Control Rod Block Instrumentation 3.3.2.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE SR 3.3.2.1.7 - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - -

Not required to be performed until 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months after reactor mode switch is in the shutdown position.

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.2.1.8 - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - -

For Function 1.a, all portions of the channel except the recirculation loop flow signal portion are excluded.

Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.2.1.9 Verify control rod sequences input to the RWM are in Prior to declaring conformance with BPWS. RWM OPERABLE following loading of sequence into RWM JAFNPP Amendment 301 I

Feedwater and Main Turbine High Water Level Trip Instrumentation 3.3.2.2 3.3 INSTRUMENTATION 3.3.2.2 Feedwater and Main Turbine High Water Level Trip Instrumentation LCO 3.3.2.2 Three channels of feedwater and main turbine high water level trip instrumentation shall be OPERABLE.

APPLICABILITY: THERMAL POWER ~ 25% RTP.

ACTIONS www-------------------------------------NOTE-----------------------------------

Separate Condition entry is allowed for each channel.

CONDITION REQUIRED ACTION COMPLETION TIME A. One feedwater and main A.1 Place channel in trip. 7 days turbine high water level trip channel inoperable.

B. Two or more feedwater and B.1 Restore feedwater and 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months main turbine high water level main turbine high water trip channels inoperable. level trip capability.

C. Required Action and C.1 - - - - - - NOTE - - - - - - - -

associated Completion Time Only applicable if not met. inoperable channel is the result of inoperable feedwater pump turbine or main turbine stop valve.

Remove affected stop 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months valve(s) from service.

QB C.2 Reduce THERMAL POWER 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months to < 25% RTP.

JAFNPP 3.3.2.2-1 Amendment 301 I

Feedwater and Main Turbine High Water Level Trip Instrumentation 3.3.2.2 SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided feedwater and main turbine high water level trip capability is maintained.

SURVEILLANCE FREQUENCY SR 3.3.2.2.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.2.2.2 ---------------------NOTE------------------

Only required to be performed when in MODE 4 for

> 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months .

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.2.2.3 Perform CHANNEL CALIBRATION. The Allowable Value In accordance with shall be ~ 222.5 inches. the Surveillance Frequency Control Program SR 3.3.2.2.4 Perform LOGIC SYSTEM FUNCTIONAL TEST including In accordance with valve actuation. the Surveillance Frequency Control Program JAFNPP 3.3.2.2-2 Amendment 301 I

PAM Instrumentation 3.3.3.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Required Action and 0.1 Enter the Condition Immediately associated Completion referenced in Time of Condition C not Table 3.3.3.1-1 for the met. channel.

E. As required by Required E.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months Action 0.1 and referenced in Table 3.3.3.1-1.

F. As required by Required F.1 Initiate action in Immediately Action 0.1 and referenced accordance with in Table 3.3.3.1-1. Specification 5.6.6.

SURVEILLANCE REQUIREMENTS

NOTE--------------------------------

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the other required channel in the associated Function is OPERABLE.

SURVEILLANCE FREQUENCY SR 3.3.3.1.1 Perform CHANNEL CHECK of each required PAM In accordance instrument channel. with the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.3.1-2 Amendment 301 I

PAM Instrumentation 3.3.3.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.3.1.2 Perform CHANNEL CALIBRATION of each required In accordance PAM instrumentation channel. with the Surve ill a nce Frequency Control Progra m JAFNPP 3.3.3.1-3 Amendment 301 I

Remote Shutdown System 3.3.3.2 SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -NOTE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months .

SURVEILLANCE FREQUENCY SR 3.3.3.2.1 Perform CHANNEL CHECK for each required In accordance instrumentation channel that is normally with the energized. Surveillance Frequency Control Program SR 3.3.3.2.2 Verify each required control circuit and transfer In accordance switch is capable of performing the intended with the function. Surveillance Frequency Control Progra m SR 3.3.3.2.3 Perform CHANNEL CALIBRATION for each required In accordance instrumentation channel. with the Surveillance Frequency Control Progra m JAFNPP 3.3.3.2-2 Amendment 301 I

ATWS-RPT Instrumentation 3.3.4.1 SURVEILLANCE REQUIREMENTS

NOTE---------------------------------

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into aS,sociated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the associated Function maintains ATWS-RPT trip capability.

SURVEILLANCE FREQUENCY SR 3.3.4.1.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.4.1.2 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.4.1.3 Calibrate the trip units. In accordance with the Surveillance Frequency Control Program SR 3.3.4.1.4 Perform CHANNEL CALIBRATION. The Allowable Values In accordance with shall be: the Surveillance Frequency Control

a. Reactor Vessel Water Level-Low Low (Level 2): Program

~ 105.4 inches; and

b. Reactor Pressure-High: ~ 1153 psig.

SR 3.3.4.1.5 Perform LOGIC SYSTEM FUNCTIONAL TEST including In accordance with breaker actuation. the Surveillance Frequency Control Program JAFNPP 3.3.4.1-3 Amendment 301 I

ECCS Instrumentation 3.3.5.1 SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - * - - - * -NOTES - - - - - - - - - - - - - - *. - - - - - - - - - - - - ** - - - -

1. Refer to Table 3.3.5.1-1 to determine which SRs apply for each ECCS Function.

2. When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed as follows: (a) for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months for Functions 3.c, 3.f, and 3.g; and (b) for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months for Functions other than 3.c, 3.f, and 3.g provided the associated Function or the redundant Function maintains ECCS initiation capability.

SURVEILLANCE FREQUENCY SR 3.3.5.1.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.5.1.2 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.5.1.3 Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.5.1.4 Calibrate the trip units. In accordance with the Surveillance Frequency Control Program SR 3.3.5.1.5 Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.5.1.6 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.5.1-7 Amendment 301 I

RCIC System Instrumentation 3.3.5.2 SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -NOTES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1. Refer to Table 3.3.5.2-1 to determine which SRs apply for each RCIC Function.

2. When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed as follows: {a} for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months for Functions 2 and 4; and {b} for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months for Functions 1 and 3 provided the associated Function maintains RCIC initiation capability.

SURVEILLANCE FREQUENCY SR 3.3.5.2.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.5.2.2 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.5.2.3 Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.5.2.4 Calibrate the trip units. In accordance with the Surveillance Frequency Control Program SR 3.3.5.2.5 Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.5.2.6 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.5.2-3 Amendment 301 I

Primary Containment Isolation Instrumentation 3.3.6.1 SURVEILLANCE REQUIREMENTS

NOTES---------------------------------

1. Refer to Table 3.3.6.1-1 to determine which SRs apply for each Primary Containment Isolation Function.

2. When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed as follows: (a) for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months for Functions 2.d, 2.g, 7.a, and 7.b; and (b) for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months for Functions other than 2.d, 2.g, 7.a, and 7.b provided the associated Function maintains isolation capability.

SURVEILLANCE FREQUENCY SR 3.3.6.1.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program SR 3.3.6.1.2 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.6.1.3 - - - - - - - - - - - - - - - - NOTE - - - - - - - - - -

For Functions 1.f and 2.f, radiation detectors are excluded.

Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Progra m (continued)

JAFNPP 3.3.6.1-4 Amendment 301 I

Primary Containment Isolation Instrumentation 3.3.6.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.6.1.4 Calibrate the trip units. In accordance with the Surveillance Frequency Control Program SR 3.3.6.1.5 Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.6.1.6 Calibrate the radiation detectors. In accordance with the Surveillance Frequency Control Program SR 3.3.6.1.7 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.6.1.8 - - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - -

"n" equals 2 channels for the purpose of determining the STAGGERED TEST BASIS Frequency.

Verify the ISOLATION INSTRUMENTATION In accordance RESPONSE TIME is within limits. with the Surveillance Frequency Control Program JAFNPP 3.3.6.1-5 Amendment 301 I

Secondary Containment Isolation Instrumentation 3.3.6.2 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME C.(continued) C.1.2 Declare associated 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months secondary containment isolation valves inoperable.

AND C.2.1 Place the associated 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months standby gas treatment (SGT) subsystem(s) in operation.

QR C.2.2 Declare associated SGT 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months subsystem(s) inoperable.

SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NOTES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1. Refer to Table 3.3.6.2-1 to determine which SRs apply for each Secondary Containment Isolation Function.

2. When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the associated Function maintains secondary containment isolation capability.

SURVEILLANCE FREQUENCY SR 3.3.6.2.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.6.2-2 Amendment 3011

Secondary Containment Isolation Instrumentation 3.3.6.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.6.2.2 Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program SR 3.3.6.2.3 Perform CHANNEL CALIBRATION In accordance with the Surveillance Frequency Control Program SR 3.3.6.2.4 Calibrate the trip units. In accordance with the Surveillance Frequency Control Program SR 3.3.6.2.5 Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.6.2.6 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.6.2-3 Amendment 301 I

CREVAS System Instrumentation 3.3.7.1 SURVEILLANCE REQUIREMENTS

NOTE---------------------------------

When the channel is placed in an inoperable status solely for performance of required Surveillances, entry into the Condition and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months .

SURVEILLANCE FREQUENCY SR 3.3.7.1.1 Perform CHANNEL CHECK. In accordance with the Survei lIa nce Frequency Control Progra m SR 3.3.7.1.2 Perform CHANNEL CALIBRATION. The Allowable In accordance Value shall be S; 4000 cpm. with the Surveillance Frequency Control Program JAFNPP 3.3.7.1-2 Amendment 301 I

Condenser Air Removal Pump Isolation Instrumentation 3.3.7.2 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME B. Condenser air removal pump B.l Restore isolation 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months isolation capability not capability.

maintained.

C. Required Action and C.l Isolate the condenser air 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time removal pumps.

of Condition A or B not met.

.QB C.2 Isolate the main steam 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months lines.

.QB C.3 Be in MODE3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months SURVEILLANCE REQUIREMENTS

NOTE-------------------------------------

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the associated Function maintains condenser air removal pump isolation capability.

SURVEILLANCE FREQUENCY SR 3.3.7.2.1 Perform CHANNEL CHECK. In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.7.2-2 Amendment 301 I

Condenser Air Removal Pump Isolation Instrumentation 3.3.7.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.7.2.2 - - - - - - - - - - - - - - - - - - - - -NOTE - - - - - - - - - - - - - - - - - - -

Radiation detectors are excluded.

Perform CHANNEL CALIBRATION. The Allowable Value In accordance with shall be ~ 3 times Normal Full Power Background. the Surveillance Frequency Control Program SR 3.3.7.2.3 Calibrate the radiation detectors. In accordance with the Surveillance Frequency Control Program SR 3.3.7.2.4 Perform LOGIC SYSTEM FUNCTIONAL TEST including In accordance with isolation valve actuation. the Surveillance Frequency Control Program JAFNPP 3.3.7.2-3 Amendment 301 I

Emergency Service Water (ESW) System Instrumentation 3.3.7.3 SURVEILLANCE REQUIREMENTS

NOTE-----------------------------------

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the ESW pressure instrumentation maintains initiation capability.

SURVEI LLANCE FREQUENCY SR 3.3.7.3.1 Perform CHANNEL CALIBRATION. The Allowable In accordance Value shall be ~ 40 psig and ~ 50 psig. with the Surveillance Frequency Control Progra m SR 3.3.7.3.2 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Surve ill a nce Frequency Control Program JAFNPP 3.3.7.3-2 Amendment 301 ,

LOP Instrumentation 3.3.B.l SURVEILLANCE REQUIREMENTS

NOTE----------------------------------

Refer to Table 3.3.B.l-l to determine which SRs apply for each LOP Function.

SURVEILLANCE FREQUENCY SR 3.3.B.l.l Perform CHANNEL CALIBRATION. In accordance with the Surveillance Frequency Control Program SR 3.3.B.l.2 Perform LOGIC SYSTEM FUNCTIONAL TEST. In accordance with the Survei Ilance Frequency Control Progra m JAFNPP 3.3.B.1-2 Amendment 301 I

RPS Electric Power Monitoring 3.3.8.2 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Required Action and D.1 Initiate action to fully insert Immediately associated Completion all insertable control rods Time of Condition A or B not in core cells containing one met in MODE 3,4, or 5 with or more fuel assemblies.

any control rod withdrawn from a core cell containing one or more fuel assemblies.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.3.8.2.1 -------------------NOTE-------------------

Only required to be performed prior to entering MODE 2 from MODE 3 or 4, when in MODE 4 for

~ 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months .

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program (continued)

JAFNPP 3.3.8.2-2 Amendment 3011

RPS Electric Power Monitoring 3.3.8.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.3.8.2.2 Perform CHANNEL CALIBRATION ofthe electric In accordance with power monitoring assemblies associated with the the Surveillance inservice RPS motor generator sets. The Allowable Frequency Control Values shall be: Program

a. Overvoltage S; 132 V, with time delay set to s; 4 seconds.

b. Undervoltage ~ 112.5 V for RPS bus A and ~

113.9 V for RPS bus B, with time delay set to s; 4 seconds.

c. Underfrequency 2: 57 Hz, with time delay set to s; 4 seconds.

SR 3.3.8.2.3 Perform CHANNEL CALIBRATION of the electric In accordance with power monitoring assemblies associated with the the Surveillance inservice alternate power supplies. The Allowable Frequency Control Values shall be: Program

a. Overvoltage s; 132 V, with time delay set to s; 4 seconds.

b. Undervoltage ~ 109.9 V, with time delay set to s; 4 seconds.

c. Underfrequency 2: 57 Hz, with time delay set to s; 4 seconds.

SR 3.3.8.2.4 Perform a system functional test. In accordance with the Surveillance Frequency Control Program JAFNPP 3.3.8.2-3 Amendment 301 I

Recirculation Loops Operating 3.4.1 SURVEILLANCE REQUIREMENTS SURVEI LLANCE FREQUENCY SR 3.4.1.1 ------------------NOTE-----------------

Only required to be performed in MODE 1.

Verify reactor operating at core flow and THERMAL In accordance POWER conditions outside the Exclusion Region of with the the power-to-flow map specified in the COLR. Surveillance Frequency Control Program SR 3.4.1.2 ------------------NOTE-----------------

Not required to be performed until 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after both recirculation loops are in operation.

Verify recirculation loop jet pump flow mismatch In accordance with both recirculation loops in operation is: with the Surveillance

a. 10% of rated core flow when operating Frequency at < 70% of rated core flow; and Control Program

b. 5% of rated core flow when operating at ~ 70% of rated core flow.

JAFNPP 3.4.1-3 Amendment 301 I

Jet Pumps 3.4.2 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.2.1 ------------------NOTE-----------------

1. Not required to be performed until 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months after associated recirculation loop is in operation.

2. Not required to be performed until 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after> 25% RTP.

Verify at least one of the following criteria (a or b) In accordance is satisfied for each operating recirculation loop: with the Surveillance

a. Recirculation pump flow to speed ratio Frequency Control Program differs by S 5% from established patterns, and recirculation loop jet pump flow to recirculation pump speed ratio differs by S 5% from established patterns.

b. Each jet pump diffuser to lower plenum differential pressure differs by S 20% from established patterns.

JAFNPP 3.4.2-2 Amendment 301 I

RCS Operational Leakage 3.4.4 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME B. (continued) B.2 Verify source of 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months unidentified LEAKAGE increase is not service sensitive type 304 or type 316 austenitic stainless steel.

C. Required Action and C.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time of Condition A or B not met. AND OR C.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months Pressure boundary LEAKAGE exists.

SU RVEI LLANCE REQU IREM ENTS SURVEILLANCE FREQUENCY SR 3.4.4.1 Verify RCS unidentified and total LEAKAGE and In accordance with unidentified LEAKAGE increase are within limits. the Surveillance Frequency Control Program JAFNPP 3.4.4-2 Amendment 3011

RCS Leakage Detection Instrumentation 3.4.5 SURVEILLANCE REQUIREMENTS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

When a channel is placed in an inoperable status solely for performance of required Surveillances, entry into associated Conditions and Required Actions may be delayed for up to 6 hours6.944444e-5 days 0.00167 hours 9.920635e-6 weeks 2.283e-6 months provided the other required leakage detection instrumentation is OPERABLE.

SURVEILLANCE FREQUENCY SR 3.4.5.1 Perform a CHANNEL CHECK of drywell continuous In accordance atmospheric monitoring systems. with the Surveillance Frequency Control Program SR 3.4.5.2 Perform a CHANNEL FUNCTIONAL TEST of In accorda nce required leakage detection instrumentation. with the Surveillance Frequency Control Program SR 3.4.5.3 Perform a CHANNEL CALIBRATION of required In accordance leakage detection instrumentation. with the Surveillance Frequency Control Program JAFNPP 3.4.5-3 Amendment 301 I

RCS Specific Activity 3.4.6 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME B. (continued) B.2.2.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months B.2.2.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.6.1 ---------------------NOTE-----------------

Only required to be performed in MODE 1.

Verify reactor coolant DOSE EQUIVALENT 1-131 specific In accordance with activity is ~ 0.2 ~Ci/gm. the Surveillance Frequency Control Program JAFNPP 3.4.6-2 Amendment 301 I

RHR Shutdown Cooling System - Hot Shutdown 3.4.7 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.7.1 - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - -

Not required to be met until 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months after reactor steam dome pressure is less than the RHR cut in permissive pressure.

Verify each required RHR shutdown cooling In accordance subsystem manual, power operated, and with the automatic valve in the flow path that is not locked, Surveillance sealed, or otherwise secured in pOSition, is in the Frequency correct pOSition, or can be aligned to the correct Control Program position.

JAFNPP 3.4.7-2 Amendment 301 I

RHR Shutdown Cooling System - Cold Shutdown 3.4.8 3.4 REACTOR COOLANT SYSTEM (RCS) 3.4.8 Residual Heat Removal (RHR) Shutdown Cooling System - Cold Shutdown LCO 3.4.8 Two RHR shutdown cooling subsystems shall be OPERABLE.

NOTE-----------------------------

One RHR shutdown cooling subsystem may be inoperable for up to 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months for the performance of Surveillances.

APPLICABI L1TY: MODE 4.

ACTIONS

NOTE---------------------------------------

Separate Condition entry is allowed for each shutdown COOling subsystem.

CONDITION REQUIRED ACTION COMPLETION TIME A. One or two RHR shutdown A.1 Verify an alternate method 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months cooling subsystems of decay heat removal is inoperable. available for each inoperable RHR shutdown cooling subsystem. Once per 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months thereafter SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.8.1 Verify each RHR shutdown COOling subsystem manual, In accordance with power operated, and automatic valve in the flow path the Surveillance that is not locked, sealed, or otherwise secured in Frequency Control pOSition, is in the correct position, or can be aligned to Program the correct position.

JAFNPP 3.4.8-1 Amendment 301 I

RCS PIT Limits 3.4.9 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.9.1 ------------NOTE-----------

Only required to be performed during Res heatup and cooldown operations and RCS inservice leak and hydrostatic testing.

Verify: In accordance with the

a. Res pressure and RCS temperature are Surveillance within the limits specified in the curves in Frequency the PTLR as applicable; and Control Program

b. RCS temperature change averaged over a one hour period is:

1. S 100°F when the RCS pressure and Res temperature are on or to the right of curve C in the PTLR as applicable, during inservice leak and hydrostatic testing;

2. S 20°F when the Res pressure and Res temperature are to the left of curve C in the PTLR as applicable, during inservice leak and hydrostatic testing; and

3. ~ 100°F during other heatup and cooldown operations.

(continued)

JAFNPP 3.4.9-3 Amendment 301 I

RCS PIT Limits 3.4.9 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.4.9.5 - - - - - - - - - - - NOTES - - - - - - - - - - -

Only required to be met in MODES 1, 2, 3, and 4 during recirculation pump startup.

Verify the difference between the reactor coolant Once within temperature in the recirculation loop to be started 15 minutes prior and the RPV coolant temperature is within the to each startup of limits specified in the PTLR. a recirculation pump SR 3.4.9.6 - - - - - - - - - NOTES - - - - - - - - - - -

Only required to be performed when tensioning the reactor vessel head bolting studs.

Verify, when the reactor vessel head bolting studs In accordance are under tension, reactor vessel flange and head with the flange temperatures are within the limits specified Surveillance in the PTLR. Frequency Control Program SR 3.4.9.7 - - - - - - - - - NOTES - - - - - - - - - - - -

Not required to be performed until 30 minutes after RCS temperature $; 80°F with any reactor vessel head bolting stud tensioned.

Verify, when the reactor vessel head bolting studs In accordance are under tension, reactor vessel flange and head with the flange temperatures are within the limits specified Surveillance in the PTLR. Frequency Control Program (continued)

JAFNPP 3.4.9-5 Amendment 301 I

RCS PIT Limits 3.4.9 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.4.9.8 - - - - - - - - - NOTES - - - - - - - - - - -

Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after RCS temperature s 100°F with any reactor vessel head bolting stud tensioned.

Verify, when the reactor vessel head bolting studs In accordance are under tension, reactor vessel flange and head with the flange temperatures are within the limits specified Surveillance in the PTLR. Frequency Control Program JAFNPP 3.4.9-6 Amendment 301 I

ECCS - Operating 3.5.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME G. Required Action and associated G.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months Completion Time of Condition C, D, E, or F not met. AND QR G.2 Reduce reactor steam 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months dome pressure to Two or more required ADS ~ 150 psig.

valves inoperable.

H. Two or more low pressure ECCS H.1 Enter LCO 3.0.3. Immediately injection/spray subsystems inoperable for reasons other than Condition A.

QR HPCI System and one or more required ADS valves inoperable.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.5.1.1 Verify, for each ECCS injection/spray subsystem, the In accordance with piping is filled with water from the pump discharge the Surveillance valve to the injection valve. Frequency Control Program (continued)

JAFNPP 3.5.1-3 Amendment 301 I

ECCS - Operating 3.5.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.5.1.2 -------------NOTE------------~

Low pressure coolant injection (LPCI) subsystems may be considered OPERABLE during alignment and operation for decay heat removal with reactor steam dome pressure less than the Residual Heat Removal (RHR) cut in permissive pressure in MODE 3, if capable of being manually realigned and not otherwise inoperable.

Verify each ECCS injection/spray subsystem manual, In accordance with power operated, and automatic valve in the flow path, the Surveillance that is not locked, sealed, or otherwise secured in Frequency Control position, is in the correct position. Program SR 3.5.1.3 Verify ADS pneumatic supply header pressure is In accordance with

~ 95 psig. the Surveillance Frequency Control Program SR 3.5.1.4 Verify the RHR System cross tie valves are closed and In accordance with power is removed from the electrical valve operator. the Surveillance Frequency Control Program SR 3.5.1.5 Cycle open and closed each LPCI motor operated valve In accordance with independent power supply battery charger AC input the Surveillance breaker and verify each LPCI inverter output voltage is Frequency Control

~ 576 V and ~ 624 V while supplying the respective Program bus.

(continued)

JAFNPP Amendment 301

ECCS - Operating 3.5.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.5.1.9 -------------NOTE-------------

Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after reactor steam pressure and flow are adequate to perform the test.

In accordance with Verify, with reactor pressure ~ 165 psig, the HPCI the Surveillance pump can develop a flow rate 2: 3400 gpm against a Frequency Control system head corresponding to reactor pressure.

Program SR 3.5.1.10 -------------NOTE-------------

1. For the HPCI System, not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after reactor steam pressure and flow are adequate to perform the test.

2. Vessel injection/spray may be excluded.

Verify each ECCS injection/spray subsystem actuates In accordance with on an actual or simulated automatic initiation signal. the Surveillance Frequency Control Program SR 3.5.1.11 -------------NOTE-------------

Valve actuation may be excluded.

Verify the ADS actuates on an actual or simulated In accordance with automatic initiation signal. the Surveillance Frequency Control Program SR 3.5.1.12 Verify each LPCI motor operated valve independent In accordance with power supply inverter capacity is adequate to supply the Surveillance and maintain in OPERABLE status the required Frequency Control emergency loads for the design duty cycle. Program (continued)

JAFNPP 3.5.1-6 Amendment 301

ECCS - Shutdown 3.5.2 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Required Action C.2 and 0.1 Initiate action to restore Immediately associated Completion secondary containment to Time not met. OPERABLE status.

0.2 Initiate action to restore Immediately one standby gas treatment subsystem to OPERABLE status.

0.3 Initiate action to restore Immediately isolation capability in each required secondary containment penetration flow path not isolated.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.5.2.1 Verify, for each required low pressure coolant injection In accordance with (LPCI) subsystem, the suppression pool water level is the Surveillance

~ 10.33 ft. Frequency Control Program (continued)

JAFNPP 3.5.2-2 Amendment 301 I

ECCS - Shutdown 3.5.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.5.2.2 Verify, for each required core spray (CS) subsystem, In accordance with the: the Surveillance Frequency Control

a. Suppression pool water level is ~ 10.33 ft; or Program

b. --------------NOTE------------

Only one required CS subsystem may take credit for this option during OPDRVs.

The water level in each condensate storage tank is ~ 324 inches.

SR 3.5.2.3 Verify, for each required ECCS injection/spray In accordance with subsystem, the piping is filled with water from the the Surveillance pump discharge valve to the injection valve. Frequency Control Program SR 3.5.2.4 --------------NOTE--------------

One LPCI subsystem may be considered OPERABLE during alignment and operation for decay heat removal if capable of being manually realigned and not otherwise inoperable.

Verify each required ECCS injection/spray subsystem In accordance with manual, power operated, and automatic valve in the the Surveillance flow path, that is not locked, sealed, or otherwise Frequency Control secured in position, is in the correct position. Program (continued)

JAFNPP 3.5.2-3 Amendment 301 I

ECCS - Shutdown 3.5.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.5.2.5 Verify each required ECCS pump develops the In accordance with specified 1'low rate against a system head the Inservice corresponding to the specified reactor pressure above Testing Program primary containment pressure.

SYSTEM HEAD CORRESPONDING TOA REACTOR PRESSURE NO. ABOVE PRIMARY OF CONTAINMENT SYSTEM FLOW RATE PUMPS PRESSURE OF CS ~ 4265 gpm 1 ~ 113 psi LPCI ~ 7700 gpm 1 ~ 20 psi SR 3.5.2.6 ---------------NOTE-------------

Vessel injection/spray may be excluded.

In accordance with Verify each required ECCS injection/spray subsystem the Surveillance actuates on an actual or simulated automatic Frequency Control initiation signal.

Program JAFNPP 3.5.2-4 Amendment 301 I

RCIC System 3.5.3 SURVEILLANCE REQUIREMENTS SURVEILLANCE I FREQUENCY SR 3.5.3.1 Verify the RCIC System piping is filled with water from In accordance with the pump discharge valve to the injection valve. the Surveillance Frequency Control Program SR 3.5.3.2 Verify each RCIC System manual, power operated, and In accordance with automatic valve in the flow path, that is not locked, the Surveillance sealed, or otherwise secured in position, is in the Frequency Control correct position. Program SR 3.5.3.3 ------------------NOTE-----------------

Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after reactor steam pressure and flow are adequate to perform the test.

Verify, with reactor pressure S 1040 psig and ~ In accordance with 970 psig, the RCIC pump can develop a flow rate ~ the Surveillance 400 gpm against a system head corresponding to Frequency Control reactor pressure. Program SR 3.5.3.4 ------------------NOTE-----------------

Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after reactor steam pressure and flow are adequate to perform the test.

Verify, with reactor pressure S 165 psig, the RCIC In accordance with pump can develop a flow rate ~ 400 gpm against a the Surveillance system head corresponding to reactor pressure. Frequency Control Program (continued)

JAFNPP 3.5.3-2 Amendment 301 I

RCIC System 3.5.3 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.5.3.5 ------------------NOTE-----------------

1. Not required to be performed until 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months after reactor steam pressure and flow are adequate to perform the test.

2. Vessel injection may be excluded.

Verify the RCIC System actuates on an actual or In accordance with simulated automatic initiation signal. the Surveillance Frequency Control Program JAFNPP 3.5.3-3 Amendment 301 I

Primary Containment 3.6.1.1 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.1.1 Perform required visual examinations and In accordance leakage rate testing except for primary with the Primary containment air lock testing, in accordance with Containment the Primary Containment Leakage Rate Testing Lea kage Rate Program. Testing Program SR 3.6.1.1.2 Verify suppression chamber pressure increase In accordance is s; 0.25 in. water gauge per minute over a 10 with the minute period with a drywell to suppression Surveillance chamber differential pressure of ~ 1 psi. Frequency Control Program

--NOTE-Only required after two consecutive tests fail and continues until two consecutive tests pass 12 months JAFNPP 3.6.1.1-2 Amendment 301 I

Primary Containment Air Locks 3.6.1.2 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Required Action and 0.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time not met. ANQ 0.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.2.1 --------------NOTES-------------

1. An inoperable air lock door does not invalidate the previous successful performance of the overall air lock leakage test.

2. Results shall be evaluated against criteria applicable to SR 3.6.1.1.1.

Perform required primary containment air lock In accordance with leakage rate testing in accordance with the Primary the Primary Containment Leakage Rate Testing Program. Containment Leakage Rate Testing Program SR 3.6.1.2.2 Verify only one door in the primary containment air In accordance with lock can be opened at a time. the Surveillance Frequency Control Program JAFNPP 3.6.1.2 -4 Amendment 301 I

PCIVs 3.6.1.3 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.3.1 --------------NOTE-------------

Not required to be met when the 20 inch and 24 inch primary containment vent and purge valves are open for inerting, de-inerting, pressure control, ALARA or air quality considerations for personnel entry, or Surveillances that require the valves to be open, provided the full-flow line to Standby Gas Treatment (SGT) System is closed and one or more SGT System reactor building suction valves are open.

Verify each 20 inch and 24 inch primary In accordance with containment vent and purge valve is closed. the Surveillance Frequency Control Program SR 3.6.1.3.2 --------------NOTE-------------

1. Valves and blind flanges in high radiation areas may be verified by use of administrative means.

2. Not required to be met for PCIVs that are open under administrative controls.

Verify each primary containment isolation manual In accordance with valve and blind flange that is located outside the Surveillance primary containment and not locked, sealed or Frequency Control otherwise secured and is required to be closed Program during accident conditions is closed.

(continued)

JAFNPP 3.6.1.3-7 Amendment 301 I

PCIVs 3.6.1.3 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.6.1.3.3 --------------NOTE,--------------

1. Valves and blind flanges in high radiation areas may be verified by use of administrative means.

2. Not required to be met for PCIVs that are open under administrative controls.

Verify each primary containment manual isolation Prior to entering valve and blind flange that is located inside primary MODE 2 or 3 from containment and not locked, sealed or otherwise MODE 4 if primary secured and is required to be closed during containment was accident conditions is closed. de-inerted while in MODE 4, if not performed within the previous 92 days SR 3.6.1.3.4 Verify continuity of the traversing incore probe (TIP) In accordance with shear isolation valve explosive charge. the Surveillance Frequency Control Program SR 3.6.1.3.5 Verify the isolation time of each power operated, In accordance with automatic PCIV, except for MSIVs, is within limits. the Inservice Testing Program SR 3.6.1.3.6 Verify the isolation time of each MSIV is ::?!: 3 seconds In accordance with and ~ 5 seconds. the Inservice Testing Program (continued)

JAFNPP 3.6.1.3-8 Amendment 301 I

PCIVs 3.6.1.3 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.6.1.3.7 Verify each automatic PCIV actuates to the In accorda nce isolation position on an actual or simulated with the isolation signal. Surveillance Frequency Control Progra m SR 3.6.1.3.8 Verify each reactor instrumentation line EFCV In accordance actuates to the isolation position on a simulated with the Inservice instrument line break. Testing Program SR 3.6.1.3.9 Remove and test the explosive squib from each In accordance shear isolation valve of the TIP System. with the Surveillance Frequency Control Program SR 3.6.1.3.10 Verify combined main steam line leakage rate is In accordance

~ 46 scfh when tested at ~ 25 psig. with the Primary Containment Leakage Rate Testing Program SR 3.6.1.3.11 Verify the leakage rate of each air operated In accordance testable check valve associated with the LPCI and with the Primary CS Systems vessel injection penetrations is within Containment limits. Leakage Rate Testing Program JAFNPP 3.6.1.3-9 Amendment 301 I

Drywell Pressure 3.6.1.4 3.6 CONTAINMENT SYSTEMS 3.6.1.4 Drywell Pressure LCO 3.6.1.4 Drywell pressure shall be :::;; 1.95 psig.

APPLICABILITY: MODES 1, 2, and 3.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Drywell pressure not within A.1 Restore drywell pressure to 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months limit. within limit.

B. Required Action and B.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time not met. AND B.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.4.1 Verify drywell pressure is within limit. In accordance with the Surveillance Frequency Control Program JAFNPP 3.6.1.4-1 Amendment 301 I

Drywell Air Temperature 3.6.1.5 3.6 CONTAINMENT SYSTEMS 3.6.1.5 Drywell Air Temperature LCO 3.6.1.5 Drywell average air temperature shall be s; 135°F.

APPLICABI LlTY: MODES 1, 2, and 3.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Drywell average air A.1 Restore drywell average air 8 hours9.259259e-5 days 0.00222 hours 1.322751e-5 weeks 3.044e-6 months temperature not within limit. temperature to within limit.

B. Required Action and B.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time not met. AND B.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.5.1 Verify drywell average air temperature is within limit. In accordance with the Surveillance Frequency Control Program JAFNPP 3.6.1.5-1 Amendment 301 I

Reactor Building-to-Suppression Chamber Vacuum Breakers 3.6.1.6 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Two lines with one or more D.1 Restore all vacuum 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months reactor building-to breakers in one line to suppression chamber OPERABLE status.

vacuum breakers inoperable for opening.

E. Required Action and E.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months Associated Completion Time not met. AND E.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.6.1 ---------------N OTES--------------

1. Not required to be met for vacuum breakers that are open during Surveillances.

2. Not required to be met for vacuum breakers open when performing their intended function.

Verify each vacuum breaker is closed. In accordance with the Surveillance Frequency Control Program SR 3.6.1.6.2 Perform a functional test of each vacuum breaker. In accordance with the Inservice Testing Program (continued)

JAFI'JPP 3.6.1.6-2 Amendment 301 I

Reactor Building-to-Suppression Chamber Vacuum Breakers 3.6.1.6 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.6.1.6.3 Perform a CHANNEL CALIBRATION of each air operated In accordance with vacuum breaker differential pressure instrument the Surveillance channel and verify the setpoint is ~ 0.5 psid. Frequency Control Program SR 3.6.1.6.4 Verify the opening setpoint of each self actuating In accordance with vacuum breaker is ~ 0.5 psid. the Surveillance Frequency Control Program JAFNPP 3.6.1.6-3 Amendment 301 I

Suppression Chamber-to-Drywell Vacuum Breakers 3.6.1.7 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.7.1 NOTES-----

1. Not required to be met for vacuum breakers that are open during Surveillances.

2. Not required to be met for vacuum breakers open when performing their intended function.

Verify each vacuum breaker is closed. In accordance with the Surveillance Frequency Control Program SR 3.6.1.7.2 Perform a functional test of each vacuum breaker. In accordance with the Inservice Testing Program SR 3.6.1.7.3 Verify the opening setpoint of each vacuum In accordance breaker is ~ 0.5 psid. with the Surveillance Frequency Control Program JAFNPP 3.6.1.7-2 Amendment 301 I

MSLCSystem 3.6.1.8 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.8.1 Verify each MSLC subsystem manual, power operated, In accordance with and automatic valve in the flow path that is not the Surveillance locked, sealed, or otherwise secured in position, is in Frequency Control the correct position or can be aligned to the correct Program position.

SR 3.6.1.8.2 Perform a system functional test of each MSLC In accordance with subsystem. the Surveillance Frequency Control Program JAFNPP 3.6.1.8-2 Amendment 301 I

RHR Containment Spray System 3.6.1.9 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.1.9.1 Verify each RHR containment spray subsystem In accordance manual, power operated, and automatic valve in with the the flow path that is not locked, sealed, or Surveillance otherwise secured in position, is in the correct Frequency position or can be aligned to the correct position. Control Program SR 3.6.1.9.2 Verify each required RHR pump develops a flow In accordance rate of ~ 7750 gpm through the associated heat with the Inservice exchanger while operating in the suppression pool Testing Program cooling mode.

SR 3.6.1.9.3 Verify each spray nozzle is unobstructed. In accordance with the Surveillance Frequency Control Program JAFNPP 3.6.1.9-2 Amendment 301 I

Suppression Pool Average Temperature 3.6.2.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME E. Suppression pool average E.1 Depressurize the reactor 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months temperature> 120°F. vessel to < 200 psig.

E.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.2.1.1 Verify suppression pool average temperature is within In accordance with the applicable limits. the Surveillance Frequency Control Program 5 minutes when performing testing that adds heat to the suppression pool JAFNPP Amendment 3011

Suppression Pool Water Level 3.6.2.2 3.6 CONTAINMENT SYSTEMS 3.6.2.2 Suppression Pool Water Level LCO 3.6.2.2 Suppression pool water level shall be ~ 13.88 ft and ~ 14 ft.

NOTE----------

Not required to be met for up to 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months during Surveillances that cause suppression pool water level to be outside the limit.

APPLICABILITY: MODES 1, 2, and 3.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Suppression pool water level A.l Restore suppression pool 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months not within limits. water level to within limits.

B. Required Action and B.l Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time not met. AND B.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.2.2.1 Verify suppression pool water level is within limits. In accordance with the Surveillance Frequency Control Program JAFNPP 3.6.2.2-1 Amendment 301 I

RHR Suppression Pool Cooling 3.6.2.3 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.2.3.1 Verify each RHR suppression pool COOling In accordance subsystem manual, power operated, and with the automatic valve in the flow path that is not locked, Surveillance sealed, or otherwise secured in pOSition, is in the Frequency correct position or can be aligned to the correct Control Program position.

SR 3.6.2.3.2 Verify each required RHR pump develops a flow In accordance rate ~ 7700 gpm through the associated heat with the Inservice exchanger while operating in the suppression pool Testing Program cooling mode.

JAFNPP 3.6.2.3-2 Amendment 301 I

Drywell-to-Suppression Chamber Differential Pressure 3.6.2.4 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.2.4.1 Verify drywell-to-suppression chamber differential In accordance pressure is within limit. with the Surveillance Frequency Control Program JAFNPP 3.6.2.4-2 Amendment 301 I

Primary Containment Oxygen Concentration 3.6.3.1 3.6 CONTAINMENT SYSTEMS 3.6.3.1 Primary Containment Oxygen Concentration LCO 3.6.3.1 The primary containment oxygen concentration shall be

< 4.0 volume percent.

APPLICABILITY: MODE 1 during the time period:

a. From 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after THERMAL POWER is > 15% RTP following startup, to

b. 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months prior to reducing THERMAL POWER to < 15% RTP prior to the next scheduled reactor shutdown.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Primary containment oxygen A.1 Restore oxygen 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months concentration not within concentration to within limit. limit.

B. Required Action and B.1 Reduce THERMAL POWER 8 hours9.259259e-5 days 0.00222 hours 1.322751e-5 weeks 3.044e-6 months associated Completion Time to ~ 15% RTP.

not met.

SURVEILLANCE REQUIREMENTS SURVEI LLANCE FREQUENCY SR 3.6.3.1.1 Verify primary containment oxygen concentration is In accordance with within limits. the Surveillance Frequency Control Program JAFNPP 3.6.3.1-1 Amendment 301 I

CAD System 3.6.3.2 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.3.2.1 Verify;?: 1400 gal of liquid nitrogen are contained In accordance in each CAD subsystem. with the Surveillance Frequency Control Program SR 3.6.3.2.2 Verify each CAD subsystem manual, power In accordance operated, and automatic valve in the flow path with the that is not locked, sealed, or otherwise secured in Surveillance position is in the correct position or can be aligned Frequency to the correct position. Control Program JAFNPP 3.6.3.2-2 Amendment 301 I

Secondary Containment 3.6.4.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME C. (continued) C.2 Initiate action to suspend Immediately OPDRVs.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.4.1.1 Verify secondary containment vacuum is :2 0.25 inch In accordance with of vacuum water gauge. the Surveillance Frequency Control Program SR 3.6.4.1.2 Verify all secondary containment equipment hatches In accordance with are closed and sealed. the Surveillance Frequency Control Program SR 3.6.4.1.3 Verify one secondary containment access door in each In accordance with access opening is closed. the Surveillance Frequency Control Program SR 3.6.4.1.4 Verify the secondary containment can be maintained In accordance with

2 0.25 inch of vacuum water gauge for 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months using the Surveillance one SGT subsystem at a flow rate s; 6000 cfm. Frequency Control Program JAFNPP 3.6.4.1-2 Amendment 301 I

SCIVs 3.6.4.2 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.4.2.1 NOTES,------

1. Valves and blind flanges in high radiation areas may be verified by use of administrative means.

2. Not required to be met for SCIVs that are open under administrative controls.

Verify each secondary containment isolation In accordance manual valve and blind flange that is not locked, with the sealed, or otherwise secured and is required to be Surveillance closed during accident conditions is closed. Frequency Control Program SR 3.6.4.2.2 Verify the isolation time of each power operated, In accordance automatic SCIV is within limits. with the Surveillance Frequency Control Program SR 3.6.4.2.3 Verify each automatic SCIV actuates to the In accordance isolation position on an actual or simulated with the actuation signal. Surveillance Frequency Control Program JAFNPP 3.6.4.2-4 Amendment 301 I

SGTSystem 3.6.4.3 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.4.3.1 Operate each SGT subsystem for ~ 10 continuous In accordance hours with heaters operating. with the Surveillance Frequency Control Program SR 3.6.4.3.2 Perform required SGT filter testing in accordance In accordance with the Ventilation Filter Testing Program (VFTP). with the VFTP SR 3.6.4.3.3 Verify each SGT subsystem actuates on an actual In accordance or simulated initiation signal. with the Surveillance Frequency Control Program SR 3.6.4.3.4 Manually cycle each SGT subsystem filter cooling In accordance cross-tie valve. with the Surveillance Frequency Control Program JAFNPP 3.6.4.3-3 Amendment 301 I

RHRSW System 3.7.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Both RHRSW subsystems NOTE 8 hours9.259259e-5 days 0.00222 hours 1.322751e-5 weeks 3.044e-6 months inoperable for reasons other Enter applicable Conditions and than Condition B. Required Actions of LCO 3.4.7 for RHR shutdown cooling made inoperable by RHRSW System.

D.l Restore one RHRSW subsystem to OPERABLE status.

E. Required Action and E.l Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time not met. AND E.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.1.1 Verify each RHRSW manual, power operated, and In accordance with automatiC valve in the flow path, that is not locked, the Surveillance sealed, or otherwise secured in position, is in the Frequency Control correct position or can be aligned to the correct Program position.

JAFNPP Amendment 301 I

ESW System and UHS 3.7.2 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME C. Required Action and C.l Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time not met. AND

.Q.B C.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months Both ESW subsystems inoperable for reasons other than Condition A.

UHS inoperable for reasons other than Condition B.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.2.1 Verify the water level in the ESW pump screenwell In accordance with is ~ 236.5 ft mean sea level. the Surveillance Frequency Control Program SR 3.7.2.2 Verify the average water temperature of UHS In accordance with is:s; 85°F. the Surveillance Frequency Control Program (continued)

JAFNPP Amendment 301 I

ESW System and UHS 3.7.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.7.2.3 ---------------NOTE.---------------

Not required to be met if UHS temperature is > 37°F.

Verify the required deicing heater feeder current is In accordance with within limits for each division of deicing heaters. the Surveillance Frequency Control Program SR 3.7.2.4 ---------------NOTE.---------------

Isolation of flow to individual components does not necessarily render ESW System inoperable.

Verify each ESW subsystem manual, power operated, In accordance with and automatic valve in the 'flow paths servicing safety the Surveillance related systems or components, that is not locked, Frequency Control sealed, or otherwise secured in position, is in the Program correct position.

SR 3.7.2.5 ---------------NOTE---------------

Not required to be met if UHS temperature is > 37°F.

Verify the required deicing heater power is within limits In accordance with for each division of deicing heaters. the Surveillance Frequency Control Program (continued)

JAFNPP 3.7.2-3 Amendment 301 I

ESW System and UHS 3.7.2 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.7.2.6 ---------------NOTE.--------------

Not required to be met if UHS temperature is > 37°F.

In accordance with Verify the required deicing heater resistance to ground the Surveillance is within limits for each division of deicing heaters. Frequency Control Program SR 3.7.2.7 Verify each ESW subsystem actuates on an actual or In accordance with simulated initiation signal. the Surveillance Frequency Control Program JAFNPP 3.7.2-4 Amendment 301 I

CREVAS System 3.7.3 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME F. Two CREVAS subsystems -------NOTE-------

inoperable during movement LCO 3.0.3 is not applicable.

of recently irradiated fuel assemblies in the secondary containment or during F.1 Suspend movement of Immediately OPDRVs. recently irradiated fuel assemblies in the secondary containment.

One or more CREVAS subsystems inoperable due to an inoperable CRE F.2 Initiate action to suspend Immediately boundary during movement OPDRVs.

of recently irradiated fuel in the secondary containment or during OPDRVs.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.3.1 Operate each CREVAS subsystem for;;:: 15 minutes. In accordance with the Surveillance Frequency Control Program SR 3.7.3.2 Perform required CREVAS filter testing in accordance In accordance with with the Ventilation Filter Testing Program (VFTP). the VFTP (continued)

JAFNPP 3.7.3-3 Amendment 301 I

Control Room AC System 3.7.4 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.4.1 Verify each control room AC subsystem has the In accordance capability to remove the assumed heat load. with the Surveillance Frequency Control Program JAFNPP 3.7.4-3 Amendment 301

Main Condenser SJAE Offgas 3.7.5 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.5.1 - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - - -

Not required to be performed until 31 days after any main steam line not isolated and SJAE in operation.

Verify the gross gamma activity rate of the noble In accordance gases is S 600,000 !-ICi/second. with the Surveillance Frequency Control Program

- - - - - NOTE- - - -

Only required when gross gamma activity rate is ~ 5,000

!-ICi/second Once within 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months after a

~ 50% increase in the nominal steady state fission gas release after factoring out increases due to changes in THERMAL POWER level JAFNPP 3.7.5-2 Amendment 301 I

Main Turbine Bypass System 3.7.6 SURVEILLANCE REQUIREMENTS SU RVEI LLANCE FREQUENCY SR 3.7.6.1 Verify one complete cycle of each required main Prior to entering turbine bypass valve. MODE 2 or 3 from MODE 4 SR 3.7.6.2 Perform a system functional test. In accordance with the Surveillance Frequency Control Program SR 3.7.6.3 Verify the TURBINE BYPASS SYSTEM RESPONSE In accordance TIME is within limits. with the Surveillance Frequency Control Program JAFNPP 3.7.6-2 Amendment 301 I

Spent Fuel Storage Pool Water Level 3.7.7 3.7 PLANT SYSTEMS 3.7.7 Spent Fuel Storage Pool Water Level LCO 3.7.7 The spent fuel storage pool water level shall be:2 21 ft 7 inches over the top of irradiated fuel assemblies seated in the spent fuel storage pool racks.

APPLICABILITY: During movement of irradiated fuel assemblies in the spent fuel storage pool.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Spent fuel storage pool water A.1 - - - - - - - - NOTE - - - - - - - -

level not within limit. LCO 3.0.3 is not applicable.

Immediately Suspend movement of irradiated fuel assemblies in the spent fuel storage pool.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.7.1 Verify the spent fuel storage pool water level is:2 21 ft In accordance with 7 inches over the top of irradiated fuel assemblies the Surveillance seated in the spent fuel storage pool racks. Frequency Control Program JAFNPP 3.7.7-1 Amendment 301 I

AC Sources - Operating 3.8.1 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. (continued) 0.2 Restore EDG subsystem to 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months OPERABLE status.

E. Two EDG subsystems E.1 Restore one EDG 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months inoperable. subsystem to OPERABLE status.

F. Required Action and F.1 Be in MODE 3. 12 hours1.388889e-4 days 0.00333 hours 1.984127e-5 weeks 4.566e-6 months associated Completion Time of Condition A, B, C, 0, or E AND not met.

F.2 Be in MODE 4. 36 hours4.166667e-4 days 0.01 hours 5.952381e-5 weeks 1.3698e-5 months G. Three or more AC sources G.1 Enter LCO 3.0.3. Immediately inoperable.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.1.1 Verify correct breaker alignment and indicated power In accordance with availability for each offsite circuit. the Surveillance Frequency Control Program (continued)

JAFNPP 3.8.1-4 Amendment 301 I

AC Sources - Operating 3.8.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.1.2 - - - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - -

All EDG subsystem starts may be preceded by an engine prelube period and followed by a warmup period prior to loading.

Verify each EDG subsystem starts from standby In accordance with conditions, force parallels, and achieves: the Surveillance Frequency Control

a. In::; 10 seconds, voltage ~ 3900 Vand Program frequency ~ 58.8 Hz; and

b. Steady state voltage ~ 3900 V and::; 4400 V and frequency ~ 58.8 Hz and::; 61.2 Hz.

SR 3.8.1.3 - - - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - - - -

1. EDG loadings may include gradual loading as recommended by the manufacturer.

2. Momentary transients outside the load range do not invalidate this test.

3. This Surveillance shall be conducted on only one EDG subsystem at a time.

4. This SR shall be preceded by and immediately follow, without shutdown, a successful performance of SR 3.8.1.2.

Verify each EDG subsystem is paralleled with normal, In accordance with reserve, or backfeed power and each EDG is loaded the Surveillance and operates for ~ 60 minutes at a load ~ 2340 kW Frequency Control Program and::; 2600 kW.

(continued)

JAFNPP 3.8.1-5 Amendment 301 I

AC Sources - Operating 3.8.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.1.4 Verify each day tank contains ~ 327 gal of fuel oil. In accordance with the Surveillance Frequency Control Program SR 3.8.1.5 Check for and remove accumulated water from each In accordance with day tank. the Surveillance Frequency Control Program SR 3.8.1.6 Verify that each EDG fuel oil transfer system operates In accordance with to automatically transfer fuel oil from its storage tank the Surveillance to the associated day tank. Frequency Control Program SR 3.8.1.7 --------------------NOTE-------------------

Only required to be met for each offsite circuit that is not energizing its respective 4.16 kV emergency bus.

Verify automatic and manual transfer of plant power In accordance with supply from the normal station service transformer to the Surveillance each offsite circuit. Frequency Control Program SR 3.8.1.8 - - - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - -

If performed with the EDG subsystem paralleled with normal, reserve, or backfeed power, it shall be performed within the power factor limit. However, if grid conditions do not permit, the power factor limit is not required to be met. Under this condition, the power factor shall be maintained as close to the limit as practicable.

Verify each EDG subsystem rejects a load greater than In accordance with or equal to its associated single largest post-accident the Surveillance load, and following load rejection, the frequency is s; Frequency Control 66.75 Hz. Program (continued)

JAFNPP 3.8.1-6 Amendment 301

AC Sources - Operating 3.8.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.1.9 --------------------NOTE-------------------

All EDG subsystem starts may be preceded by an engine prelube period.

Verify on an actual or simulated loss of power signal: In accordance with the Surveillance

a. De-energization of emergency buses; Frequency Control Program

b. Load shedding from emergency buses; and

c. EDG subsystem auto-starts from standby condition, force parallels, and:

1. energizes permanently connected loads in S; 11 seconds,

2. energizes auto-connected shutdown loads,

3. maintains steady state voltage

~ 3900 V and s; 4400 V,

4. maintains steady state frequency ~ 58.8 Hz and s; 61.2 Hz, and

5. supplies permanently connected and auto connected shutdown loads for ~ 5 minutes.

(continued)

JAFNPP 3.8.1-7 Amendment 301 I

AC Sources - Operating 3.8.1 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.1.10 - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - - - -

All EDG subsystem starts may be preceded by an engine prelube period.

Verify on an actual or simulated Emergency Core In accordance with Cooling System (ECCS) initiation signal each EDG the Surveillance subsystem auto-starts from standby condition, force Frequency Control parallels, and: Program

a. In :s; 10 seconds after auto-start and during tests, achieves voltage ~ 3900 V, frequency ~ 58.8 Hz;

b. Achieves steady state voltage ~ 3900 V and :s; 4400 V and frequency ~ 58.8 Hz and :s; 61.2 Hz;

c. Operates for ~ 5 minutes;

d. Permanently connected loads remain energized from the offsite power system; and

e. Emergency loads are auto-connected in the prescribed sequence from the offsite power system.

(continued)

JAFNPP 3.8.1-8 Amendment 301 I

AC Sources - Operating 3.8.1 SURVEILLANCE REQUIREMENTS (continued)

SU RVEI LLANCE FREQUENCY SR 3.8.1.11 - - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - -

Momentary transients outside the load and power factor ranges do not invalidate this test.

If grid conditions do not permit, the power factor limit is not required to be met. Under this condition, the power factor shall be maintained as close to the limit as practicable.

Verify each EDG subsystem operating within the power In accordance with factor limit operates for 2: 8 hour9.259259e-5 days 0.00222 hours 1.322751e-5 weeks 3.044e-6 months s: the Surveillance Frequency Control

a. For 2: 2 hours2.314815e-5 days 5.555556e-4 hours 3.306878e-6 weeks 7.61e-7 months each EDG loaded 2: 2730 kWand Program

$; 2860 kW; and

b. For the remaining hours of the test each EDG loaded 2: 2340 kW and:$; 2600 kW.

(continued)

JAFNPP 3.8.1-9 Amendment 301 I

AC Sources - Operating 3.8.1 SURVEILLANCE REQUIREMENTS (continued)

SU RVEI LLANCE FREQUENCY SR 3.8.1.12 - - - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - - -

All EDG subsystem starts may be preceded by an engine prelube period.

Verify, on an actual or simulated loss of power signal In accordance with in conjunction with an actual or simulated ECCS the Surveillance initiation signal: Frequency Control Program

a. De-energization of emergency buses;

b. Load shedding from emergency buses; and

c. EDG subsystem auto-starts from standby condition, force parallels, and:

1. energizes permanently connected loads in :s; 11 seconds,

2. energizes auto-connected emergency loads in the prescribed sequence,

3. achieves steady state voltage ~ 3900 V and:s; 4400 V,

4. achieves steady state frequency ~ 58.8 Hz and :s; 61.2 Hz, and

5. supplies permanently connected and auto-connected emergency loads for <:: 5 minutes.

SR 3.8.1.13 Verify interval between each sequenced load block is In accordance with greater than or equal to the minimum design load the Surveillance interval. Frequency Control Program JAFNPP 3.8.1-10 Amendment 301 I

Diesel Fuel Oil, Lube Oil, and Starting Air 3.8.3 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. One or more EDGs with new D.1 Restore stored fuel oil 30 days fuel oil properties not properties to within limit.

within limits.

E. One or more EDGs with E.1 Restore required starting 48 hours5.555556e-4 days 0.0133 hours 7.936508e-5 weeks 1.8264e-5 months required starting air air receiver pressure to receiver pressure < 150 within limits.

psig and ~ 110 psig.

F. Requires Action and F.1 Declare associated EDG Immediately associated Completion inoperable.

Time of Condition A, B, C, D, or E not met.

OR One or more EDGs with diesel fuel oil, lube oil, or starting air subsystem not within limits for reasons other then condition A, B, C, D, or E.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.3.1 Verify each fuel oil storage tank contains ~ a 7 day In accordance supply of fuel. with the Surveillance Frequency Control Program (continued)

JAFNPP 3.8.3-2 Amendment 301 I

Diesel Fuel Oil, Lube Oil, and Starting Air 3.8.3 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.3.2 Verify lube oil inventory of each EDG is ~ a 7 day In accordance supply. with the Surveillance

! Frequency Control i Program SR 3.8.3.3 Verify fuel oil properties of new and stored fuel oil lin accordance are tested in accordance with, and maintained with the Diesel within the limits of, the diesel Fuel Oil Testing Fuel Oil Testing Program. . Program SR 3.8.3.4 Verify Each EDG required air start receiver pressure In accordance is ~ 150 psig. with the Surveillance Frequency Control Program SR 3.8.3.5 Check for and remove accumulated water from In accordance each fuel oil storage tank. with the Surveillance Frequency Control Program JAFNPP 3.8.3-3 Amendment 301 I

DC Sources - Operating 3.8.4 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.4.1 Verify battery terminal voltage on float charge is: In accordance with the

a. ~ 127.8 VDC for 125 VDC batteries, and Surveillance Frequency

b. ~ 396.2 VDC for 419 VDC LPCI MOV Control Progra m independent power supply batteries.

SR 3.8.4.2 Verify each 125 VDC battery charger supplies ~ In accordance 270 amps at ~ 128 VDC for ~ 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months . with the Surveillance Frequency Control Program Verify each 125 VDC battery charger can recharge the battery to the fully charged state within 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months while supplying the largest combined demands of the various continuous steady state loads, after a battery discharge to the bounding design basis event discharge state.

SR 3.8.4.3 - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - -

This Surveillance shall not normally be performed in MODE 1, 2, or 3 for the 125 VDC batteries.

However, portions of the Surveillance may be performed to reestablish OPERABILITY provided an assessment determines the safety of the plant is maintained or enhanced. Credit may be taken for unplanned events that satisfy this SR.

Verify battery capacity is adequate to In accordance supply, and maintain in OPERABLE status, with the the required emergency loads for the design Surveillance duty cycle when subjected to a battery Frequency service test or a modified performance Control Program discharge test.

(continued)

JAFNPP 3.8.4-3 Amendment 301 I

DC Sources - Operating 3.8.4 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.4.4 - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - -

This Surveillance shall not normally be performed in MODE 1, 2, or 3 for the 125 VDC batteries.

However, portions of the Surveillance may be performed to reestablish OPERABILITY provided an assessment determines the safety of the plant is maintained or enhanced. Credit may be taken for unplanned events that satisfy this SR.

Verify battery capacity is ~ 80% of the In accordance manufacturer's rating when subjected to a with the performance discharge test or a modified Surveillance performance discharge test. Frequency Control Program 12 months when battery shows degradation or has reached 85%

of expected life with capacity

< 100% of manufacturer's rating 24 months when battery has reached 85% of the expected life with capacity

~ 100% of manufactu rer's rating JAFNPP 3.8.4-4 Amendment 301 I

Battery Cell Parameters 3.8.6 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME A. (continued) A.3 Restore battery cell 31 days parameters to Category A and B limits of Table 3.8.6-1.

B. Required Action and B.l Declare associated battery Immediately associated Completion Time inoperable.

of Condition A not met.

.QB One or more batteries with average electrolyte temperature of the representative cells not within limits.

QB One or more batteries with one or more battery cell parameters not within Category C limits.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.6.1 Verify battery cell parameters. meet Table 3.8.6-1 In accordance with Category A limits. the Surveillance Frequency Control Program (continued)

JAFNPP 3.8.6-2 Amendment 301 I

Battery Cell Parameters 3.8.6 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.8.6.2 Verify battery cell parameters meet Table 3.8.6-1 In accordance with Category B limits. the Surveillance Frequency Control Program SR 3.8.6.3 Verify average electrolyte temperature of In accordance with representative cells is ~ 65°F for each 125 VDC the Surveillance battery, and ~ 50°F for each 419 VDC LPCI MOV Frequency Control independent power supply battery. Program JAFNPP 3.8.6-3 Amendment 301 I

Distribution Systems - Operating 3.8.7 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME D. Two or more electrical power D.l Enter LCO 3.0.3. Immediately distribution subsystems inoperable that result in a loss of function.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.7.1 Verify correct breaker alignments and voltage to In accordance with required AC and 125 VDC electrical power distribution the Surveillance subsystems. Frequency Control Program JAFNPP 3.8.7-2 Amendment 301 I

Distribution Systems - Shutdown 3.8.8 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME A.(continued)

A.2.3 Initiate action to suspend Immediately operations with a potential for draining the reactor vessel.

Mill A.2.4 Initiate actions to restore Immediately required AC and 125 VDC electrical power distribution subsystems to OPERABLE status.

Mill A.2.5 Declare associated Immediately required shutdown cooling subsystem(s) inoperable.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.8.1 Verify correct breaker alignments and voltage to In accordance with required AC and 125 VDC electrical power distribution the Surveillance subsystems. Frequency Control Program JAFNPP 3.8.8-2 Amendment 301 1

Refueling Equipment Interlocks 3.9.1 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.1.1 Perform CHANNEL FUNCTIONAL TEST on each of In accordance the following required refueling equipment with the interlock inputs: Surveillance Frequency

a. AII-rods-in, Control Program

b. Refuel platform position,

c. Refuel platform fuel grapple, fuel loaded,

d. Refuel platform fuel grapple not fully up,

e. Refuel platform frame mounted hoist, fuel loaded, and

f. Refuel platform trolley mounted (monorail) hoist, fuel loaded.

JAFNPP 3.9.1-2 Amendment 301 I

Refuel Position One-Rod-Out Interlock 3.9.2 3.9 REFUELING OPERATIONS 3.9.2 Refuel Position One-Rod-Out Interlock LCO 3.9.2 The refuel position one-rod-out interlock shall be OPERABLE.

APPLICABI LlTY: MODE 5 with the reactor mode switch in the refuel position and any control rod withdrawn.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Refuel position one-rod-out A.1 Suspend control rod Immediately interlock inoperable. withdrawal.

A.2 Initiate action to fully insert Immediately all insertable control rods in core cells containing one or more fuel assemblies.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.2.1 Verify reactor mode switch locked in refuel position. In accordance with the Surveillance Frequency Control Program SR 3.9.2.2 - - - - - - - - - - - - - - - - - -NOTE- - - - - - - - - - - - - - - - -

Not required to be performed until 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months after any control rod is withdrawn.

Perform CHANNEL FUNCTIONAL TEST. In accordance with the Surveillance Frequency Control Program JAFNPP 3.9.2-1 Amendment 301 I

Control Rod Position 3.9.3 3.9 REFUELING OPERATIONS 3.9.3 Control Rod Position LCO 3.9.3 All control rods shall be fully inserted.

APPLICABILITY: When loading fuel assemblies into the core.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more control rods not A.1 Suspend loading fuel Immediately fully inserted. assemblies into the core.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.3.1 Verify all control rods are fully inserted. In accordance with the Surveillance Frequency Control Program JAFNPP 3.9.3-1 Amendment 301 I

Control Rod OPERABILITY - Refueling 3.9.5 3.9 REFUELING OPERATIONS 3.9.5 Control Rod OPERABILITY - Refueling LCO 3.9.5 Each withdrawn control rod shall be OPERABLE.

APPLICABILITY: MODE 5.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more withdrawn A.1 Initiate action to fully insert Immediately control rods inoperable. inoperable withdrawn control rods.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.5.1 --------------------NOTE-------------------

Not required to be performed until 7 days after the control rod is withdrawn.

Insert each withdrawn control rod at least one notch. In accordance with the Surveillance Frequency Control Program SR 3.9.5.2 Verify each withdrawn control rod scram accumulator In accordance with pressure is ~ 940 psig. the Surveillance Frequency Control Program JAFNPP 3.9.5-1 Amendment 301 I

RPV Water Level 3.9.6 3.9 REFUELING OPERATIONS 3.9.6 Reactor Pressure Vessel (RPV) Water Level LCO 3.9.6 RPV water level shall be ~ 22 ft 2 inches above the top of the RPV flange.

APPLICABI L1TY: During movement of irradiated fuel assemblies within the RPV, During movement of new fuel assemblies or handling of control rods within the RPV, when irradiated fuel assemblies are seated within the RPV.

ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. RPV water level not within A.l Suspend movement of fuel Immediately limit. assemblies and handling of control rods within the RPV.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.6.1 Verify RPV water level is ~ 22 ft 2 inches above the top In accordance with of the RPV flange. the Surveillance Frequency Control Program JAFNPP 3.9.6-1 Amendment 301 I

RHR - High Water Level 3.9.7 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME B. (continued) B.3 Initiate action to restore Immediately one standby gas treatment subsystem to OPERABLE status.

B.4 Initiate action to restore Immediately isolation capability in each required secondary containment penetration flow path not isolated.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.7.1 Verify each required RHR shutdown cooling subsystem In accordance with manual, power operated, and automatic valve in the the Surveillance flow path that is not locked, sealed, or otherwise Frequency Control secured in position, is in the correct position, or can Program be aligned to the correct position.

JAFNPP 3.9.7-2 Amendment 301 I

RHR - Low Water Level 3.9.8 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME B. (continued) B.3 Initiate action to restore Immediately isolation capability in each required secondary containment penetration flow path not isolated.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.8.1 Verify each RHR shutdown cooling subsystem manual, In accordance with power operated, and automatic valve in the flow path the Surveillance that is not locked, sealed, or otherwise secured in Frequency Control position, is in the correct position, or can be aligned to Program the correct position.

JAFNPP 3.9.8-2 Amendment 301 I

Reactor Mode Switch Interlock Testing 3.10.2 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. (continued) A.3.1 Place the reactor mode 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months switch in the shutdown position.

A.3.2 - - - - - - - - NOTE - - - - - - - - -

Only applicable in MODE 5.

Place the reactor mode 1 hour1.157407e-5 days 2.777778e-4 hours 1.653439e-6 weeks 3.805e-7 months switch in the refuel position.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.10.2.1 Verify all control rods are fully inserted in core cells In accordance with containing one or more fuel assemblies. the Surveillance Frequency Control Program SR 3.10.2.2 Verify no CORE ALTERATIONS are in progress. In accordance with the Surveillance Frequency Control Program JAFNPP 3.10.2-2 Amendment 301 I

Single Control Rod Withdrawal- Hot Shutdown 3.10.3 SURVEILLANCE REQUIREMENTS SURVEI LLANCE FREQUENCY SR 3.10.3.1 Perform the applicable SRs for the required LCOs. According to the applicable SRs SR 3.10.3.2 - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - -

Not required to be met if SR 3.10.3.1 is satisfied for LCO 3.10.3.d.l requirements.

Verify all control rods, other than the control rod In accordance being withdrawn, in a five by five array centered with the on the control rod being withdrawn, are disarmed. Surveillance Frequency Control Program SR 3.10.3.3 Verify all control rods, other than the control rod In accordance being withdrawn, are fully inserted. with the Surveillance Frequency Control Program JAFNPP 3.10.3-3 Amendment 301 I

Single Control Rod Withdrawal - Cold Shutdown 3.10.4 ACTIONS (continued)

CONDITION REQUIRED ACTION COMPLETION TIME B. One or more of the above B.l Suspend withdrawal of the Immediately requirements not met with control rod and removal of the affected control rod not associated CRD.

insertable.

B.2.1 Initiate action to fully insert Immediately all control rods.

B.2.2 Initiate action to satisfy the Immediately requirements of this LCO.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.10.4.1 Perform the applicable SRs for the required LCOs. According to the applicable SRs SR 3.10.4.2 - - - - - - - - - - - - - - - - - NOTE - - - - - - - - - - - - - - - - - - -

Not required to be met jf SR 3.10.4.1 is satisfied for LCO 3.10.4.c.l requirements.

Verify all control rods, other than the control rod being In accordance with withdrawn, in a five by five array centered on the the Surveillance control rod being withdrawn, are disarmed. Frequency Control Program (continued)

JAFNPP 3.10.4-3 Amendment 301 I

Single Control Rod Withdrawal - Cold Shutdown 3.10.4 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.10.4.3 Verify all control rods, other than the control rod being In accordance with withdrawn, are fully inserted. the Surveillance Frequency Control Program SR 3.10.4.4 -----------------NOTE---------------------

Not required to be met if SR 3.10.4.1 is satisfied for LCO 3.10.4.b.1 requirements.

Verify a control rod withdrawal block is inserted. In accordance with the Surveillance Frequency Control Program JAFNPP 3.10.4-4 Amendment 301 I

Single CRD Removal - Refueling 3.10.5 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. (continued) A.2.1 Initiate action to fully insert Immediately all control rods.

A.2.2 Initiate action to satisfy the Immediately requirements of this LCO.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.10.5.1 Verify all control rods, other than the control rod In accordance with withdrawn for the removal of the associated CRD, are the Surveillance fully inserted. Frequency Control Program SR 3.10.5.2 Verify all control rods, other than the control rod In accordance with withdrawn for the removal of the associated CRD, in a the Surveillance five by five array centered on the control rod Frequency Control withdrawn for the removal of the associated CRD, are Program disarmed.

SR 3.10.5.3 Verify a control rod withdrawal block is inserted. In accordance with the Surveillance Frequency Control Program SR 3.10.5.4 Perform SR 3.1.1.1. According to SR 3.1.1.1 SR 3.10.5.5 Verify no other CORE ALTERATIONS are in progress. In accordance with the Surveillance Frequency Control Program JAFNPP 3.10.5-2 Amendment 301 I

Multiple Control Rod Withdrawal - Refueling 3.10.6 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. (continued) A.3.1 Initiate action to fully insert Immediately all control rods in core cells containing one or more fuel assemblies.

A.3.2 Initiate action to satisfy the Immediately requirements of this LCO.

SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.10.6.1 Verify the four fuel assemblies are removed from core In accordance with cells associated with each control rod or CRD the Surveillance removed. Frequency Control Program SR 3.10.6.2 Verify all other control rods in core cells containing one In accordance with or more fuel assemblies are fully inserted. the Surveillance Frequency Control Program SR 3.10.6.3 -------------------NOTE-------------------

Only required to be met during fuel loading.

Verify fuel assemblies being loaded are in compliance In accordance with with an approved spiral reload sequence. the Surveillance Frequency Control Program JAFNPP 3.10.6-2 Amendment 301 I

SDM Test-Refueling 3.10.8 SURVEILLANCE REQUIREMENTS {continued}

SURVEILLANCE FREQUENCY SR 3.10.8.2 - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - -

Not required to be met if SR 3.10.8.3 satisfied.

Perform the MODE 2 applicable SRs for According to the LCO 3.3.2.1, Function 2 of Table 3.3.2.1-1. applicable SRs SR 3.10.8.3 - - - - - - - - - - - - - - - - - - NOTE- - - - - - - - - - - - - - - - -

Not required to be met if SR 3.10.8.2 satisfied.

Verify movement of control rods is in compliance During control with the approved control rod sequence for the rod movement SDM test by a second licensed operator or other qualified member of the technical staff.

SR 3.10.8.4 Verify no other CORE ALTERATIONS are in

In accordance progress. I with the Surveillance Frequency Control Progra m (continued)

JAFNPP 3.10.8-3 Amendment 301 I

SDM Test - Refueling 3.10.8 SURVEILLANCE REQUIREMENTS (continued)

SURVEILLANCE FREQUENCY SR 3.10.8.5 Verify each withdrawn control rod does not go to Each time the the withdrawn overtravel position. control rod is withdrawn to "full-out" position Prior to satisfying LCO 3.10.8.c requirement after work on control rod or CRD

System that

could affect

~~~~~~~~~~~~~~~~~~~~~~~~I coupling SR 3.10.8.6 Verify CRD charging water header pressure ~ 940 . In accordance psig. I with the Surveillance Frequency Control Program JAFNPP 3.10.8-4 Amendment 301 I

Programs and Manuals 5.5 5.5 Programs and Manuals 5.5.14 Control Room Envelope Habitability Program (continued)

e. The quantitative limits on unfiltered air inleakage into the CRE. These limits shall be stated in a manner to allow direct comparison to the unfiltered air inleakage measured by the testing described in paragraph c. The unfiltered air inleakage limit for radiological challenges is the inleakage flow rate assumed in the licensing basis analyses of DBA consequences. Unfiltered air inleakage limits for hazardous chemicals must ensure that exposure of CRE occupants to these hazards will be within the assumptions in the licensing basis.

f. The provisions of SR 3.0.2 are applicable to the Frequencies for assessing CRE habitability, determining CRE unfiltered inleakage, and measuring CRE pressure and assessing the CRE boundary as required by paragraphs c and d, respectively.

5.5.15 Surveillance FreQuency Control program This program provides controls for Surveillance Frequencies. The program shall ensure that Surveillance Requirements specified in the Technical Specifications are performed at intervals sufficient to assure the associated Limiting Conditions for Operation are met.

a. The Surveillance Frequency Control Program shall contain a list of Frequencies of the Surveillance Requirements for which the Frequency is controlled by the program.

b. Changes to the Frequencies listed in the Surveillance Frequency Control Program shall be made in accordance with NEI 04-10, "Risk-Informed Method for Control of Surveillance Frequencies," Revision 1.

c. The provisions of Surveillance Requirements 3.0.2 and 3.0.3 are applicable to the Frequencies established in the Surveillance Frequency Control Program.

JAFNPP 5.5-15 Amendment 301 I

UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555*0001 SAFETY EVALUATION BY THE OFFICE OF NUCLEAR REACTOR REGULATION RELATED TO AMENDMENT NO. 301 TO RENEWED FACILITY OPERATING LICENSE NO. DPR-59 ENTERGY NUCLEAR OPERATIONS, INC.

JAMES A. FITZPATRICK NUCLEAR POWER PLANT DOCKET NO. 50-333

1.0 INTRODUCTION

By letter dated July 22, 2011, Agencywide Documents Access and Management System (ADAMS) Accession No. ML112060443, as supplemented by letter dated October 19, 2011, ADAMS Accession No. ML112930085, Entergy Nuclear Operations, Inc. (the licensee) submitted a request for changes to the James A. FitzPatrick Nuclear Power Plant (JAFNPP)

Technical Specifications (TSs). The supplement dated October 19, 2011, provided additional information that clarified the application, did not expand the scope of the application as originally noticed, and did not change the Nuclear Regulatory Commission (NRC) staff's original proposed no significant hazards consideration determination.

The requested change is the adoption of NRC-approved Technical Specification Task Force (TSTF) traveler TSTF-425, Revision 3, "Relocate Surveillance Frequencies to Licensee Control-RITSTF Initiative 5b" (Reference 1). When implemented, TSTF-425 relocates most periodic frequencies of TS surveillances to a licensee controlled program, the Surveillance Frequency Control Program (SFCP), and provides requirements for the new program in the Administrative Controls section of the TS. All surveillance frequencies can be relocated except:

Frequencies that reference other approved programs for the specific interval (such as the In-Service Testing Program or the Primary Containment Leakage Rate Testing Program);

Frequencies that are purely event-driven (e.g., "each time the control rod is withdrawn to the 'full out' position");

Frequencies that are event-driven, but have a time component for performing the surveillance on a one-time basis once the event occurs (e.g., "within 24 hours2.777778e-4 days 0.00667 hours 3.968254e-5 weeks 9.132e-6 months after thermal power reaching;::: 95% RTP [Reactor Thermal Power]"); and

Frequencies that are related to specific conditions (e.g., battery degradation, age and capacity) or conditions for the performance of a surveillance requirement (SR) (e.g.,

"drywell to suppression chamber differential pressure decrease").

- 2 A new program is added to the Administrative Controls of TS Section 5 as Specification 5.5.15.

The new program is called the SFCP and describes the requirements for the program to control changes to the relocated surveillance frequencies. The TS Bases for each of the affected SRs are revised to state that the frequency is set in accordance with the SFCP. Some SRs Bases do not contain a discussion of the frequency. In these cases, the Bases describing the current frequency were added to maintain consistency with the Bases for similar surveillances. These instances are noted in the markup along with the source of the text. The proposed licensee changes to the Administrative Controls of the TS to incorporate the SFCP include a specific reference to Nuclear Energy Institute (NEI) 04-10, "Risk-Informed Technical Specifications Initiative 5B, Risk-Informed Method for Control of Surveillance Frequencies," Revision 1 (Reference 2) as the basis for making any changes to the surveillance frequencies once they are relocated out of the TS.

In a letter dated September 19, 2007 (Reference 3) , the NRC staff approved NEI 04-10, Revision 1, as acceptable for referencing in licensing actions to the extent specified and under the limitations delineated in NEI 04-10, and the final acceptance safety evaluation (SE) providing the basis for NRC acceptance of NEI 04-10.

2.0 REGULATORY EVALUATION

In the "Final Policy Statement: Technical Specifications for Nuclear Power Plants" published in the Federal Register (FR) (58 FR 39132, July 22, 1993) the NRC addressed the use of Probabilistic Safety Analysis (PSA, currently referred to as Probabilistic Risk Assessment or PRA) in Standard Technical Specifications. In discussing the use of PSA in Nuclear Power Plant TSs, the Commission wrote in part:

The Commission believes that it would be inappropriate at this time to allow requirements which meet one or more of the first three criteria [of 10 CFR 50.36 1] to be deleted from Technical Specifications based solely on PSA (Criterion 4). However, if the results of PSA indicate that Technical Specifications can be relaxed or removed, a deterministic review will be performed.

The Commission Policy in this regard is consistent with its Policy Statement on "Safety Goals for the operation of Nuclear Power Plants," 51 FR 30028, published on August 21, 1986. The Policy Statement on Safety Goals states in part, "* *

probabilistic results should also be reasonably balanced and supported through use of deterministic arguments. In this way, judgments can be made * *

about the degree of confidence to be given to these [probabilisticf estimates and assumptions. This is a key part of the process of determining the degree of regulatory conservatism that may be warranted for particular decisions. This defense-In-depth approach is expected to continue to ensure the protection of public health and safety."

The Commission will continue to use PSA, consistent with its policy on Safety Goals, as a tool in evaluating specific line-item improvements to Technical 1 This clarification is not part of the original policy statement.

2 The Federal Register Notice 58 FR 39135 (Alteration in Original) explains the brackets.

-3 Specifications, new requirements, and industry proposals for risk-based Technical Specification changes.

Approximately 2 years later, the NRC provided additional detail concerning the use of PRA in the "Final Policy Statement: Use of Probabilistic Risk Assessment Methods in Nuclear Regulatory Activities" published in the Federal Register (60 FR 42622, August 16, 1995). The Commission, in discussing the deterministic and probabilistic approach to regulation, and the Commission's extension and enhancement of traditional regulation, wrote in part:

PRA addresses a broad spectrum of initiating events by assessing the event frequency. Mitigating system reliability is then assessed, including the potential for multiple and common cause failures. The treatment therefore goes beyond the single failure requirements in the deterministic approach. The probabilistic approach to regulation is, therefore, considered an extension and enhancement of traditional regulation by considering risk in a more coherent and complete manner.

The Commission provided its new policy, stating:

Although PRA methods and information have thus far been used successfully in nuclear regulatory activities, there have been concerns that PRA methods are not consistently applied throughout the agency, that sufficient agency PRAIstatistics expertise is not available, and that the Commission is not deriving full benefit from the large agency and industry investment in the developed risk assessment methods. Therefore, the Commission believes that an overall policy on the use of PRA in nuclear regulatory activities should be established so that the many potential applications of PRA can be implemented in a consistent and predictable manner that promotes regulatory stability and efficiency. This policy statement sets forth the Commission's intention to encourage the use of PRA and to expand the scope of PRA applications in all nuclear regulatory matters to the extent supported by the state-of-the-art in terms of methods and data.

Implementation of the policy statement will improve the regulatory process in three areas: Foremost, through safety decision making enhanced by the use of PRA insights; through more efficient use of agency resources; and through a reduction in unnecessary burdens on licensees.

Therefore, the Commission adopts the following policy statement regarding the expanded NRC use of PRA:

(1) The use of PRA technology should be increased in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data and in a manner that complements the NRC's deterministic approach and supports the NRC's traditional defense-in-depth philosophy.

(2) PRA and associated analyses (e.g., sensitivity studies, uncertainty analyses, and importance measures) should be used in regulatory matters, where practical within the bounds of the state-of-the-art, to reduce unnecessary conservatism associated with current regulatory requirements, regulatory guides, license commitments, and staff practices. Where appropriate, PRA

-4 should be used to support the proposal for additional regulatory requirements in accordance with 10 CFR 50.109 (Backfit Rule). Appropriate procedures for including PRA in the process for changing regulatory requirements should be developed and followed. It is, of course, understood that the intent of this policy is that existing rules and regulations shall be complied with unless these rules and regulations are revised.

(3) PRA evaluations in support of regulatory decisions should be as realistic as practicable and appropriate supporting data should be publicly available for review.

(4) The Commission's safety goals for nuclear power plants and subsidiary numerical objectives are to be used with appropriate consideration of uncertainties in making regulatory judgments on the need for proposing and backfitting new generiC requirements on nuclear power plant licensees.

In Title 10 of the Code of Federal Regulations (10 CFR) 50.36, the NRC established its regulatory requirements related to the content of TS. Pursuant to 10 CFR 50.36, TS are required to include items in the following five specific categories related to station operation:

(1) safety limits, limiting safety system settings, and limiting control settings; (2) limiting conditions for operation (LCOs); (3) SRs; (4) design features; and (5) administrative controls.

As stated in 10 CFR 50.36(c)(3), "Surveillance requirements are requirements relating to test, calibration, or inspection to assure that the necessary quality of systems and components is maintained, that facility operation will be within safety limits, and that the limiting conditions for operation will be met." These categories will remain in TS. The new TS SFCP provides the necessary administrative controls to require that surveillances relocated to the SFCP are conducted at a frequency to assure that the necessary quality of systems and components is maintained, that facility operation will be within safety limits, and that the LCOs will be met.

Changes to surveillance frequencies in the SFCP are made using the methodology contained in NEI 04-10, including qualitative considerations, results of risk analyses, sensitivity studies and any bounding analyses, and recommended monitoring of structures, systems, and components (SSCs), and required to be documented. Furthermore, changes to frequencies are subject to regulatory review and oversight of the SFCP implementation through the rigorous NRC review of safety-related SSC performance provided by the reactor oversight program (ROP).

Licensees are required by TS to perform surveillance test, calibration, or inspection on specific safety-related system eqUipment (e.g., reactivity control, power distribution, electrical, and instrumentation) to verify system operability. Surveillance frequencies, currently identified in TS, are based primarily upon deterministic methods such as engineering judgment, operating experience, and manufacturer's recommendations. The licensee's use of NRC-approved methodologies identified in NEI 04-10 provides a way to establish risk-informed surveillance frequencies that complement the deterministic approach and support the NRC's traditional defense-in-depth philosophy.

The licensee's SFCP ensures that SRs specified in the TS are performed at intervals sufficient to assure the above regulatory requirements are met. Existing regulatory requirements, such as 10 CFR 50.65, "Requirements for monitoring the effectiveness of maintenance at nuclear power plants," and 10 CFR 50 Appendix B (corrective action program), require licensee monitoring of

-5 surveillance test failures and implementing corrective actions to address such failures. One of these actions may be to consider increasing the frequency at which a surveillance test is performed. In addition, the SFCP implementation guidance in NEI 04-10 requires monitoring the performance of SSCs for which surveillance frequencies are decreased to assure reduced testing does not adversely impact the SSCs. These requirements, and the monitoring required by NEI 04-10, ensure that surveillance frequencies are sufficient to assure that the requirements of 10 CFR 50.36 are satisfied and that any performance deficiencies will be identified and appropriate corrective actions taken.

Regulatory Guide (RG) 1.174, "An Approach for Using Probabilistic Risk Assessment in Risk Informed Decisions on Plant-Specific Changes to the Licensing Basis," (Reference 4), describes a risk-informed approach, acceptable to the NRC, for assessing the nature and impact of proposed permanent licensing-basis changes by considering engineering issues and applying risk insights. This RG also provides risk acceptance guidelines for evaluating the results of such evaluations.

RG 1.177, "An Approach for Plant-Specific, Risk-Informed Decisionmaking: Technical Specifications," (Reference 5), describes an acceptable risk-informed approach specifically for assessing proposed permanent TS changes.

RG 1.200, "An Approach for Determining the Technical Adequacy of Probabilistic Risk Assessment Results for Risk-Informed Activities," (Reference 6), describes an acceptable approach for determining whether the quality of the PRA, in total or the parts that are used to support an application, is sufficient to provide confidence in the results, such that the PRA can be used in regulatory decision making for light-water reactors.

3.0 TECHNICAL EVALUATION

The licensee's adoption of TSTF-425 for JAFNPP provides for administrative relocation of applicable surveillance frequencies, and provides for the addition of the SFCP to the administrative controls of TS. TSTF-425 also requires the application of NEI 04-10 for any changes to surveillance frequencies within the SFCP. The licensee's application for the changes proposed in TSTF-425 included documentation regarding the PRA technical adequacy consistent with the requirements of RG 1.200. In accordance with NEI 04-10, PRA methods are used, in combination with plant performance data and other conSiderations, to identify and justify modifications to the surveillance frequencies of equipment at nuclear power plants. This is in accordance with guidance provided in RG 1.174 and RG 1.177 in support of changes to surveillance test intervals.

3.1 RG 1.177 Five Key Safety Principles RG 1.177 identifies five key safety principles required for risk-informed changes to TS. Each of these principles is addressed by the industry methodology document, NEI 04-10.

3.1 .1 The Proposed Change Meets Current Regulations 10 CFR 50.36( c)(3) provides that TSs will include surveillances which are "requirements relating to test, calibration, or inspection to assure that necessary quality of systems and components is maintained, that facility operation will be within safety limits, and that the limiting conditions for operation will be met." NEI 04-10 provides guidance for relocating the surveillance frequencies

- 6 from the TSs to a licensee-controlled program by providing an NRC-approved methodology for control of the surveillance frequencies. The surveillances themselves would remain in the TSs, as required by 10 CFR 50.36(c)(3).

This change is consistent with other NRC-approved TS changes in which the surveillance frequencies are relocated to licensee-controlled documents, such as surveillances performed in accordance with the Inservice Testing Program or the Primary Containment Leakage Rate Testing Program. Thus, this proposed change meets the first key safety principle of RG 1.177 by complying with current regulations.

3.1.2 The Proposed Change Is Consistent With the Defense-in-Depth Philosophy Consistency with the defense-in-depth philosophy, the second key safety prinCiple of RG 1.177, is maintained if:

A reasonable balance is preserved among prevention of core damage, prevention of containment failure, and consequence mitigation.

Over-reliance on programmatic activities to compensate for weaknesses in plant design is avoided.

System redundancy, independence, and diversity are preserved commensurate with the expected frequency, consequences of challenges to the system, and uncertainties (e.g., no risk outliers). Because the scope of the proposed methodology is limited to revision of surveillance frequencies, the redundancy, independence, and diversity of plant systems are not impacted.

Defenses against potential common cause failures are preserved, and the potential for the introduction of new common cause failure mechanisms is assessed.

Independence of barriers is not degraded.

Defenses against human errors are preserved.

The intent of the General Design Criteria in 10 CFR Part 50, Appendix A, is maintained.

TSTF-425 requires the application of NEI 04-10 for any changes to surveillance frequencies within the SFCP. NEI 04-10 uses both the core damage frequency (CDF) and the large early release frequency (LERF) metrics to evaluate the impact of proposed changes to surveillance frequencies. The guidance of RG 1.174 and RG 1.177 for changes to CDF and LERF is achieved by evaluation using a comprehensive risk analysis, which assesses the impact of proposed changes including contributions from human errors and common cause failures.

Defense-in-depth is also included in the methodology explicitly as a qualitative consideration outside of the risk analysis, as is the potential impact on detection of component degradation that could lead to an increased likelihood of common cause failures. Both the quantitative risk analysis and the qualitative considerations assure a reasonable balance of defense-in-depth is maintained to ensure protection of public health and safety, satisfying the second key safety principle of RG 1.177.

3.1.3 The Proposed Change Maintains Sufficient Safety Margins The engineering evaluation that will be conducted by the licensee under the SFCP when frequencies are revised will assess the impact of the proposed frequency change to assure that

-7 sufficient safety margins are maintained. The guidelines used for making that assessment will include ensuring the proposed surveillance test frequency change is not in conflict with approved industry codes and standards or adversely affects any assumptions or inputs to the safety analysis, or, if such inputs are affected, justification is provided to ensure sufficient safety margin will continue to exist.

The design, operation, testing methods, and acceptance criteria for SSCs, specified in applicable codes and standards (or alternatives approved for use by the NRC) will continue to be met as described in the plant licensing basis (including the Updated Final Safety Analysis Report and Bases to TS), since these are not affected by changes to the surveillance frequencies. Similarly, there is no impact to safety analysis acceptance criteria as described in the plant licensing basis.

Thus, safety margins are maintained by the proposed methodology, and the third key safety principle of RG 1.177 is satisfied.

3.1.4 When Proposed Changes Result in an Increase in Core Damage Frequency or Risk, the Increases Should Be Small and Consistent With the Intent of the Commission's Safety Goal Policy Statement RG 1.177 provides a framework for evaluating the risk impact of proposed changes to surveillance frequencies. This requires the identification of the risk contribution from impacted surveillances, determination of the risk impact from the change to the proposed surveillance frequency, and performance of sensitivity and uncertainty evaluations. TSTF-425 requires application of NEI 04-10 in the SFCP. NEJ 04-10 satisfies the intent of RG 1.177 requirements for evaluating the change in risk, and for assuring that such changes are small.

3.1.4.1 Quality of the PRA The quality of the JAFNPP PRA must be compatible with the safety implications of the proposed TS change and the role the PRA plays in justifying the change. That is, the more the potential change in risk or the greater the uncertainty in that risk from the requested TS change, or both, the more rigor that must go into ensuring the quality of the PRA.

RG 1.200 is NRC's developed regulatory guidance for assessing the technical adequacy of a PRA. Revision 2 of this RG endorses (with comments and qualifications) the use of the American Society of Mechanical Engineers (ASME)/American Nuclear Society (ANS)

RA-Sa-2009, "Addenda to ASME RA-S-2008 Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications," (Reference 7),

NEI 00-02, "PRA Peer Review Process Guidelines," (Reference 8) and NEI 05-04, "Process for Performing Follow-On PRA Peer Reviews Using the ASME PRA Standard" (Reference 9).

Revision 1 of this RG had endorsed the internal events PRA standard ASME RA-Sb-2005, "Addenda to ASME RA-S-2002 Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications," (Reference 10). For the internal events PRA, there are no significant technical differences in the standard requirements, therefore, assessments using the previously endorsed internal events standard are acceptable.

The licensee used RG 1.200 to address the technical adequacy of the JAFNPP PRA. The licensee has performed an assessment of the PRA models used to support the SFCP using the

-8 guidance of RG 1.200 to assure that the PRA models are capable of determining the change in risk due to changes to surveillance frequencies of SSCs, using plant-specific data and models.

Capability category II is required by NEI 04-10 for the internal events PRA, and any identified deficiencies to those requirements are assessed further to determine any impacts to proposed decreases to surveillance frequencies, including by the use of sensitivity studies where appropriate.

The JAFNPP internal events PRA model was subjected to a peer review using RG 1.200 and the PRA standard in September 2009. This was a full-scope peer review of the internal events model. The review identified 21 facts and observations (F&O) where the JAFNPP model did not meet at least capability category II of the standard for an applicable supporting requirement.

The licensee identified and dispositioned each of the remaining 11 open F&Os for this application, and confirmed that the other 10 F&Os have been resolved and closed out. The NRC staff reviewed the licensee's assessment of the open F&Os as discussed below:

F&O for Supporting Requirement AS-B7 The credit for control rod drive (CRD) makeup does not account for time dependency, in that the CRD has insufficient capacity for decay heat removal immediately after a transient. Therefore, some other source of makeup must function early in the event sequence. The licensee stated that although the success of other early injection sources different than CRD is not explicitly modeled, CRD is only credited for long-term loss of containment heat removal sequences which implicitly have long-term failure of other higher capacity high-pressure injection sources. Early failures of these other sources of injection due to random (not due to accident phenomena) failures are of sufficiently low probability that they do not contribute to sequences above the truncation limit for quantification.

Therefore, this deficiency can be addressed by the methodology of NEI 04-10.

F&O for Supporting Requirement HR-G7 The human error probability (HEP) dependency method does not consider the sequence of the human error events, instead applying a dependent probability to the event with the higher HEP. The licensee has not yet corrected its dependency analysis in the JAFNPP model. An evaluation of combinations of human errors which are contributors to the JAFNPP PRA results by the licensee determined that lower probability human error events are generally those which occur earlier in the accident sequence, and that there is conservatism in the overall dependent HEP values calculated due to low or zero dependence between the execution steps of two human actions which is not explicitly considered. In response to a request for additional information (RAI), the licensee performed a re-evaluation of dependent events considering the actual order of the events and stated that the cumulative impact on the baseline CDF was an increase of less than 2%, and much less than 1% for baseline LERF. Therefore, the licensee concluded that the impact on risk calculations which support this application is not significant. The NRC staff cannot conclude that in all cases the HEP dependency would be insignificant to risk calculations which support this application; however, sensitivity analyses, required by the NEI 04-10 methodology to evaluate existing open F&Os from the peer review, can be conducted if one or more HEP dependencies are related to surveillance test intervals being evaluated. Therefore, this deficiency can be addressed consistent with the methodology of NEI 04-10.

F&O for Supporting Requirement aU-A3 The quantification method is a point estimate of the mean value of CDF, but due to the manner in which the JAFNPP basic event database is constructed, the state-of-knowledge correlation is not fully accounted. The licensee conducted sensitivity analyses at the time of the peer review which demonstrated that this is not a

- 9 significant issue, and the mean value and point estimate of the mean value for both CDF and LERF are very close in value. Therefore, this deficiency can be addressed by the methodology of NEI 04-10.

F&O for Supporting Requirement QU-D7 The model documentation includes risk ranking of components, but there is no discussion of the reasonableness of these rankings. A review of the rankings was performed which established a verification of the reasonableness of the results, therefore, the F&O represents a baseline model documentation issue only, and would not impact risk calculations for this application. Therefore, this deficiency would not impact risk calculations, and so resolution of this F&O is not required to support this application.

F&O for Supporting Requirement LE-C4 Point estimates are used for success branches of the level two PRA model while logic models are used for the failure branches. There are two main types of event tree branches in a typical level two PRA model - hardware failure branches and severe accident phenomena branches. For phenomena branches, point estimate probabilities are applied which is reasonable and appropriate. For hardware failure branches, the success branch is near a probability of 1.0, so there is minimal impact of applying a point estimate.

Therefore, there is no significant impact expected on this application, and so this deficiency can be addressed by the methodology of NEI 04-10.

F&O for Supporting Requirement LE-E3 There are inconsistencies in the definition of "early" for LERF calculations. In response to an RAI, the licensee reviewed core damage sequences which are binned as large early release sequences, and confirmed that the existing LERF model bins CDF sequences accordingly. The only core damage sequence identified as potentially impacted by the definition of "early" was the loss of containment decay heat removal which does not involve a large early release. If this sequence were considered to be a large early release, the baseline LERF would increase by 3 x 1Q-8/year, which is not significant compared to the nominal baseline LERF. Therefore, this deficiency can be addressed by the methodology of NEI04-10.

F&O for Supporting Requirement IFSN-A6 The potential impacts from jet impingement, pipe whip, humidity, temperature, are not assessed and are not stated in the documentation as not being assessed. The PRA standard does not require these impacts to be addressed for capability category II, and so this is a documentation issue only. Therefore, this deficiency would not impact risk calculations, and so resolution of this F&O is not required to support this application.

F&O for Supporting Requirement IFEV-A 1 The corresponding initiating event group is not identified for the majority of internal flooding scenarios. The licensee has identified that the link to initiating event applied for each flood scenario is provided in the model files but not documented. Therefore, this deficiency would not impact risk calculations, and so resolution of this F&O is not required to support this application.

F&O for Supporting Requirement IFEV-A5 and IFQU-A1 The initiating event frequency is not documented and is only found in spreadsheets outside of the approved documentation. This is a documentation issue only. Therefore, this deficiency would not impact risk calculations, and so resolution of this F&O is not required to support this application.

- 10 F&O for Supporting Requirement IFEV-A6 Review and consideration of plant-specific information on flooding is required for capability category II. The licensee has reviewed plant data and not found any plant-specific significant impacts which would require altering the generic data, and so this is an open documentation issue only. Therefore, this deficiency would not impact risk calculations, and so resolution of this F&O is not required to support this application.

Based on the above discussion, the licensee's assessment using the applicable PRA standard and RG 1.200, the level of PRA quality, combined with the proposed evaluation and disposition of the open F&Os, using sensitivity analyses consistent with the guidance in NEI 04-10, is sufficient to support the evaluation of changes proposed to surveillance frequencies within the SFCP, and is consistent with regulatory position 2.3.1 of RG 1.177.

3.1.4.2 Scope of the PRA The licensee is required to evaluate each proposed change to a relocated surveillance frequency using the guidance contained in NEI 04-10 to determine its potential impact on risk, due to impacts from internal events, fires, seismic, other external events, and from shutdown conditions. Consideration is made of both CDF and LERF metrics. In cases where a PRA of sufficient scope or where quantitative risk models were unavailable, the licensee uses bounding analyses, or other conservative quantitative evaluations. A qualitative screening analysis may be used when the surveillance frequency impact on plant risk is shown to be negligible or zero.

The licensee will use the fire PRA developed in support of the Individual Plant Examination of External Events (IPEEE) to evaluate surveillance test interval changes of plant equipment when that equipment is included in the fire PRA; otherwise a qualitative or bounding assessment or a determination of zero fire risk impact will be performed. The licensee will use its IPEEE seismic margins analysis to assess seismic risk impact. The IPEEE external hazards screening analysis will be applied to qualitatively assess this hazard group.

Based on the above discussion, the licensee's evaluation methodology is sufficient to ensure the scope of the risk contribution of each surveillance frequency change is properly identified for evaluation, and is consistent with regulatory position 2.3.2 of RG 1.177.

3.1.4.3 PRA Modeling The licensee will determine whether the SSCs affected by a proposed change to a surveillance frequency are modeled in the PRA. Where the SSC is directly or implicitly modeled, a quantitative evaluation of the risk impact may be carried out. The methodology adjusts the failure probability of the impacted SSCs, including any impacted common cause failure modes, based on the proposed change to the surveillance frequency. Where the SSC is not modeled in the PRA, bounding analyses are performed to characterize the impact of the proposed change to the surveillance frequency. Potential impacts on the risk analyses due to screening criteria and truncation levels are addressed by the requirements for PRA technical adequacy consistent with guidance contained in RG 1.200, and by sensitivity studies identified in NEI 04-10. The licensee will perform quantitative evaluations of the impact of selected testing strategy (i.e.,

staggered testing or sequential testing) consistently with the guidance of NUREG/CR-6141 and NUREG/CR-5497, as discussed in NEI 04-10.

- 11 Thus, through the application of NEI 04-10, the JAFNPP PRA modeling is sufficient to ensure an acceptable evaluation of risk for the proposed changes in surveillance frequency, and is consistent with regulatory position 2.3.3 of RG 1.177.

3.1.4.4 Assumptions for Time Related Failure Contributions The failure probabilities of SSCs modeled in the JAFNPP PRA may include a standby time related contribution and a cyclic demand-related contribution. NEI 04-10 criteria adjusts the time-related failure contribution of SSCs affected by the proposed change to surveillance frequency. This is consistent with RG 1.177, Section 2.3.3 which permits separation of the failure rate contributions into demand and standby for evaluation of SRs. If the available data do not support distinguishing between the time-related failures and demand failures, then the change to surveillance frequency is conservatively assumed to impact the total failure probability of the SSC, including both standby and demand contributions. The SSC failure rate (per unit time) is assumed to be unaffected by the change in test frequency, and will be confirmed by the required monitoring and feedback implemented after the change in surveillance frequency is implemented. The process requires consideration of qualitative sources of information with regards to potential impacts of test frequency on SSC performance, including industry and plant-specific operating experience, vendor recommendations, industry standards, and code-specified test intervals. Thus, the process is not reliant upon risk analyses as the sole basis for the proposed changes.

The potential beneficial risk impacts of reduced surveillance frequency, including reduced downtime, lesser potential for restoration errors, reduction of potential for test caused transients, and reduced test-caused wear of equipment, are identified qualitatively, but are conservatively not required to be quantitatively assessed. Thus, based on the above discussion, through the application of NEI 04-10, the licensee has employed reasonable assumptions with regard to extensions of surveillance test intervals, and is consistent with regulatory position 2.3.4 of RG 1.177.

3.1.4.5 Sensitivity and Uncertainty Analyses NEI 04-10 requires sensitivity studies to assess the impact of uncertainties from key assumptions of the PRA, uncertainty in the failure probabilities of the affected SSCs, impact to the frequency of initiating events, and of any identified deviations from capability category II of the PRA standard. Where the sensitivity analyses identify a potential impact on the proposed change, revised surveillance frequencies are considered, along with any qualitative considerations that may bear on the results of such sensitivity studies. Required monitoring and feedback of SSC performance once the revised surveillance frequencies are implemented will also be performed. Thus, through the application of NEI 04-10, the licensee has appropriately considered the possible impact of PRA model uncertainty and sensitivity to key assumptions and model limitations, and is consistent with regulatory position 2.3.5 of RG 1.177.

3.1.4.6 Acceptance Guidelines The licensee wi" quantitatively evaluate the change in total risk (including internal and external events contributions) in terms of CDF and LERF for both the individual risk impact of a proposed change in surveillance frequency and the cumulative impact from a" individual changes to surveillance frequencies using the guidance contained in NRC approved NEI 04-10 in

- 12 accordance with the TS SFCP. Each individual change to surveillance frequency must show a risk impact below 1E-6 per year for change to CDF, and below 1E-7 per year for change to LERF. These are consistent with the limits of RG 1.174 for very small changes in risk. Where the RG 1.174 limits are not met, the process either considers revised surveillance frequencies which are consistent with RG 1.174 or the process terminates without permitting the proposed changes. Where quantitative results are unavailable to permit comparison to acceptance guidelines, appropriate qualitative analyses are required to demonstrate that the associated risk impact of a proposed change to surveillance frequency is negligible or zero. Otherwise, bounding quantitative analyses are required which demonstrate the risk impact is at least one order of magnitude lower than the RG 1.174 acceptance guidelines for very small changes in risk. In addition to assessing each individual SSC surveillance frequency change, the cumulative impact of all changes must result in a risk impact below 1E-5 per year for change to CDF, and below 1E-6 per year for change to LERF, and the total CDF and total LERF must be reasonably shown to be less than 1E-4 per year and 1E-5 per year, respectively. These are consistent with the limits of RG 1.174 for acceptable changes in risk, as referenced by RG 1.177 for changes to surveillance frequencies. The staff interprets this assessment of cumulative risk as a requirement to calculate the change in risk from a baseline model utilizing failure probabilities based on the surveillance frequencies prior to implementation of the SFCP, compared to a revised model with failure probabilities based on changed surveillance frequencies. The NRC staff further notes that the licensee includes a provision to exclude the contribution to cumulative risk from individual changes to surveillance frequencies associated with insignificant risk increases (less than 5E-8 CDF and 5E-9 LERF) once the baseline PRA models are updated to include the effects of the revised surveillance frequencies.

The quantitative acceptance guidance of RG 1.174 is supplemented by qualitative information to evaluate the proposed changes to surveillance frequencies, including industry and plant-specific operating experience, vendor recommendations, industry standards, the results of sensitivity studies, and SSC performance data and test history.

The final acceptability of the proposed change is based on all of these considerations and not solely on the PRA results compared to numerical acceptance guidelines. Post implementation performance monitoring and feedback are also required to assure continued reliability of the components. The licensee's application of NEI 04-10 provides reasonable acceptance guidelines and methods for evaluating the risk increase of proposed changes to surveillance frequencies, consistent with Regulatory Position 2.4 of RG 1.177. Therefore, based on the above discussion, the proposed methodology satisfies the fourth key safety principle of RG 1.177 by assuring any increase in risk is small consistent with the intent of the Commission's Safety Goal Policy Statement.

3.1.5 The Impact of the Proposed Change Should Be Monitored Using Performance Measurement Strategies The licensee's adoption of TSTF-425 requires application of NEI 04-10 in the SFCP. NE104-10 requires performance monitoring of SSCs whose surveillance frequency has been revised as part of a feedback process to assure that the change in test frequency has not resulted in degradation of equipment performance and operational safety. The monitoring and feedback includes consideration of maintenance rule monitoring of equipment performance. In the event of degradation of SSC performance, the surveillance frequency will be reassessed in accordance with the methodology, in addition to any corrective actions which may apply as part

- 13 of the maintenance rule requirements. The performance monitoring and feedback specified in NEI 04-10 is sufficient to reasonably assure acceptable SSC performance and is consistent with regulatory position 3.2 of RG 1.177. Thus, the fifth key safety principle of RG 1.177 is satisfied.

3.2 Addition of Surveillance Frequency Control Program to Administrative Controls The licensee has included the SFCP and specific requirements into the Administrative Controls, TS Section 5.5.15, Surveillance Frequency Control Program, as follows:

This program provides controls for Surveillance Frequencies. The program shall ensure that Surveillance Requirements specified in the Technical Specifications are performed at intervals sufficient to assure that the associated Limiting Conditions for Operation are met.

a. The Surveillance Frequency Control Program shall contain a list of Frequencies of the Surveillance Requirements for which the Frequency is controlled by the program.

b. Changes to the Frequencies listed in the Surveillance Frequency Control Program shall be made in accordance with NEI 04-10, "Risk-Informed Method for Control of Surveillance Frequencies," Revision 1.

c. The provisions of Surveillance Requirements 3.0.2 and 3.0.3 are applicable to the Frequencies established in the Surveillance Frequency Control Program.

The proposed program is consistent with the model application of TSTF-425, and is therefore acceptable.

3.3 Summary and Conclusions The NRC staff has reviewed the licensee's proposed relocation of some surveillance frequencies to a licensee controlled document, and controlling changes to surveillance frequencies in accordance with a new program, the SFCP, identified in the administrative controls of TS. The SFCP and TS Section 5.5.15 references NEI 04-10, which provides a risk informed methodology using plant-specific risk insights and performance data to revise surveillance frequencies within the SFCP. This methodology supports relocating surveillance frequencies from TS to a licensee-controlled document, provided those frequencies are changed in accordance with NEI 04-10 which is specified in the Administrative Controls of the TS.

The proposed licensee adoption of TSTF-425 and risk-informed methodology of NEI 04-10 as referenced in the Administrative Controls of TS, satisfies the key principles of risk-informed decision making applied to changes to TS as delineated in RG 1.177 and RG 1.174, in that:

The proposed change meets current regulations;

The proposed change is consistent with defense-in-depth philosophy;

The proposed change maintains sufficient safety margins;

Increases in risk resulting from the proposed change are small and consistent with the Commission's Safety Goal Policy Statement; and

The impact of the proposed change is monitored with performance measurement strategies.

- 14 10 CFR 50.36(c)(3) states "Technical specifications will include items in the following categories: Surveillance requirements. Surveillance requirements are requirements relating to test, calibration, or inspection to assure that the necessary quality of systems and components is maintained, that facility operation will be within safety limits, and that the limiting conditions for operation will be met." The NRC staff finds that with the proposed relocation of surveillance frequencies to an owner-controlled document and administratively controlled in accordance with the TS SFCP, Entergy Nuclear Operations continues to meet the regulatory requirement of 10 CFR 50.36, and specifically, 10 CFR 50.36(c)(3), Surveillance requirements.

4.0 STATE CONSULTATION

In accordance with the Commission's regulations, the New York State official was notified of the proposed issuance of the amendment. The State official had no comments.

5.0 ENVIRONMENTAL CONSIDERATION

The amendment changes a requirement with respect to the installation or use of a facility component located within the restricted area as defined in 10 CFR Part 20 and changes surveillance requirements. The NRC staff has determined that the amendment involves no significant increase in the amounts, and no significant change in the types, of any effluents that may be released offsite, and that there is no significant increase in individual or cumulative occupational radiation exposure. The Commission has previously issued a proposed finding that the amendment involves no significant hazards consideration, and there has been no public comment on such finding (76 FR 70772). Accordingly, the amendment meets the eligibility criteria for categorical exclusion set forth in 10 CFR 51.22(c)(9). Pursuant to 10 CFR 51.22(b) no environmental impact statement or environmental assessment need be prepared in connection with the issuance of the amendment.

6.0 CONCLUSION

The Commission has concluded, based on the considerations discussed above that (1) there is reasonable assurance that the health and safety of the public will not be endangered by operation in the proposed manner, (2) such activities will be conducted in compliance with the Commission's regulations, and (3) the issuance of the amendment will not be inimical to the common defense and security or to the health and safety of the public.

7.0 REFERENCES

1. TSTF-425, Revision 3, "Relocate Surveillance Frequencies to Licensee Control-RITSTF Initiative 5b," March 18,2009 (ADAMS Accession No. ML090850642).

2. NEI 04-10, Revision 1, "Risk-Informed Technical Specifications Initiative 58, Risk Informed Method for Control of Surveillance Frequencies," April 2007 (ADAMS Accession No. ML071360456).

3. Final Safety Evaluation for Nuclear Energy Institute (NEI) Topical Report (TR) 04-10, Revision 1, "Risk-Informed Technical Specifications Initiative 58, Risk-Informed Method for Control of Surveillance Frequencies," September 19, 2007 (ADAMS Accession No. ML072570267).

- 15

4. Regulatory Guide 1.174, "An Approach for Using Probabilistic Risk Assessment in Risk Informed Decisions on Plant-Specific Changes to the Licensing Basis," Revision 2, May 2011 (ADAMS Accession No. ML100910006).

5. Regulatory Guide 1.177, "An Approach for Plant-Specific, Risk-Informed Decisionmaking: Technical Specifications," Revision 1, May 2011 (ADAMS Accession No. ML 10091000S).

6. Regulatory Guide 1.200, "An Approach for Determining the Technical Adequacy of Probabilistic Risk Assessment Results for Risk-Informed Activities," Revision 2, March 2009 (ADAMS Accession No. ML090410014).

7. ASME/ANS PRA Standard ASME/ANS RA-Sa-2009, "Addenda to ASME RA-S-200S, "Standard for Level1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications."

S. NEI 00-02, Revision 1 "Probabilistic Risk Assessment (PRA) Peer Review Process Guidance, Revision 1, May 2006 (ADAMS Accession No. ML061510621).

9. NEI 05-04, "Process for Performing Follow-On PRA Peer Reviews Using the ASME PRA Standard", Revision 0, August 2006.

10. ASME pRA Standard ASME RA-Sb-2005, "Addenda to ASME RA-S-2002, "Standard for Probabilistic Risk Assessment for Nuclear Power Plant Application."

Principal Contributor: Andrew J. Howe Gerald Waig Date: February 14, 2012

ML113430851 OFFICE LPL1-1\PM LPL1-1\LA APLAlBC STSB/BC OGC LPL1-1\BC LPL1-1\PM NAME B. K. Vaidya SLittie DHarrison RElliott CKanatas GWilson B. K. Vaidya DATE 1/17/12 1/17/2012 1/20/12 12/22/11 1123112 2/9112 2/13/12

v t e Letter Sequence Approval
TAC:ME6755, Control Room Habitability, Relocate Surveillance Frequencies to Licensee Control - RITSTF Initiative 5B (Approved, Closed)
Initiation Request Acceptance Administration Questions 12 September 2011 Answers 19 October 2011 Results Approval Other:
MONTHYEAR2011-08-24 [Table View]

ML113430851

Text

SUBJECT:

Dear Sir or Madam:

Enclosures:

Attachment:

1.0 INTRODUCTION

2.0 REGULATORY EVALUATION

3.0 TECHNICAL EVALUATION

4.0 STATE CONSULTATION

5.0 ENVIRONMENTAL CONSIDERATION

6.0 CONCLUSION

7.0 REFERENCES

Navigation menu

Search