ML18016A866: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 17: | Line 17: | ||
=Text= | =Text= | ||
{{#Wiki_filter:HARRIS NUCLEAR POWER PLANT OPERATOR TRAINING SIMJLATOR SIC(JLATOR CERTIFICATION | {{#Wiki_filter:HARRIS NUCLEAR POWER PLANT OPERATOR TRAINING SIMJLATOR SIC( JLATOR CERTIFICATION QUADRENNIALREPORT MARCH 1999 CAROLINAPOWER 4 LIGHT COMPANY NEW HILL, NORTH CAROLINA eeosiioieo iiosi9 05000400' PDR ADGCK VDa L~ | ||
~~ | Page 1 of 33 | ||
SHNPP CERTIFICATION REPORT PACKAGE TABLE OF CONTENTS FORM 474 INTRODUCTION General Information Simulator Configuration Control Exceptions to ANSUANS-3.5-1985 Standard 1.0 SIMULATOR INFORMATION 1.1 Simulator General 1.1.1 Owner 1.1.2 Reference Plant/Unit 1.1.3 Simulator Supplier 1.1.4 Ready for Training Date 1.1.5 Type of Report 1.2 Simulator Control Room 1.2.1 Physical Arrangement 1.2.2 Panels and Equipment 1.2.3 Systems 1.2.4 Environment 1.3 Simulator Instructor Interface 1.3.1 General Instructor System 1.3.2 Initial Conditions 1.3.3 Malfunction Selection 1.3.4 Overrides 1.3.5 Local Operator Actions 1.3.6 Parameter and Equipment Monitoring 1.3.7 Simulator Special Features 1.4 Operating Procedures for Reference Plant 1.5 Changes Since Last Report 1.5.1 Plant Modifications 1.5.2 Simulator Upgrades Page 2 of 33 | |||
'I~ | ~ ~ | ||
~~SIMULATOR CERTIFICATION REPORT PACKAGE TABLE OF CONTENTS 2.0 | SHNPP CERTIFICATION REPORT PACKAGE TABLE OF CONTENTS FORM 474 INTRODUCTION General Information Simulator Configuration Control Exceptions to ANSUANS-3.5-1985 Standard 1.0 SIMULATOR INFORMATION 1.1 Simulator General 1.1.1 Owner 1.1.2 Reference Plant/Unit 1.1.3 Simulator Supplier 1.1.4 Ready for Training Date 1.1.5 Type of Report 1.2 Simulator Control Room 1.2.1 Physical Arrangement 1.2.2 Panels and Equipment 1.2.3 Systems 1.2.4 Environment 1.3 Simulator Instructor Interface 1.3.1 General Instructor System 1.3.2 Initial Conditions 1.3.3 Malfunction Selection 1.3.4 Overrides 1.3.5 Local Operator Actions 1.3.6 Parameter and Equipment Monitoring 1.3.7 Simulator Special Features 1.4 Operating Procedures for Reference Plant 1.5 Changes Since Last Report 1.5.1 Plant Modifications 1.5.2 Simulator Upgrades Page 2 of 33 | ||
'I ~ | |||
~ ~ | |||
SIMULATOR CERTIFICATION REPORT PACKAGE TABLE OF CONTENTS 2.0 SIMULATORDESIGN DATABASE 3.0 SIMULATOR DISCREPANCY AND UPGRADE PROGRAM 3.1 Simulator Service Request Program 3.2 Engineering Service Request Implementation 3.3 Simulator Configuration Management System 4.0 SIMULATORTESTS 4.1 Certification Test Schedule 4.1.1 Annual Operability Tests 4.1.2 Malfunction Tests 4.2 Simulator Test Procedure to ANSI/ANS-3.5-1985 Cross-Reference 4.3 Summary of Certification Deficiencies 4.4 Certification Test Abstracts APPENDIX A: SCHEDULE OF ANNUALOPERABILITYTESTS APPENDIX B: SCHEDULE OF MALFUNCTIONTESTS APPENDIX C: | |||
==SUMMARY== | ==SUMMARY== | ||
OF CERTIFICATION DEFICIENCIES SIMULATOR CERTIFICATION TEST ABSTRACTS SCHEDULED | OF CERTIFICATION DEFICIENCIES APPENDIX D: SIMULATOR CERTIFICATION TEST ABSTRACTS APPENDIX E: SCHEDULED MALFUNCTIONTEST TO ANSI 3.5 1985 CROSS REFERENCE Page 3 of 33 | ||
Washingtcn, DC 205554001~and to tho Paperwork Reduction Project (31504138), Office of Managomont and Budgot.Washkigton, DC 205CL lf an Accmai'on coaoctke does not rgsptay a currently veld OMB ccntrol number, tho NRC | |||
INBTRUOTIDNs: | NRC FORM 474 U.S. NUCLEAR REGULATORY COMMISSION APPROVED BY OMBt NO. 31500138 EXPIR ESt 08is li2001 (8.1998) Estimated burdon por rosponso to comply with thiS mandatory information collection roqvest: 120 hour* This information ls used to certify a simviatkxt facility. Forward comments regarding burdon estimate to tho Records Management Branch (TA F33), U.S. | ||
This form Is to bo Ekxf tor Initial ceniyication. | Nuclear Regulatory CommMiion. Washingtcn, DC 205554001 ~ and to tho Paperwork SIMULATION FACILITYCERTIFICATION Reduction Project (31504138), Office of Managomont and Budgot. Washkigton, DC 205CL lf an Accmai'on coaoctke does not rgsptay a currently veld OMB ccntrol number, tho NRC mayynot conduct or sponsor. and a porson ts not roqvirod to respond to, the Information colloction. | ||
recortificadon gl required), and for any chango to a simulation fadlky performance testing plan made aker krklat submktal of such a lan.Provide the foo krformation and chock the a ate box to Indicate reason tor submittal. | INBTRUOTIDNs: This form Is to bo Ekxf tor Initial ceniyication. recortificadon gl required), and for any chango to a simulation fadlky performance testing plan made aker krklat submktal of such a lan. Provide the foo krformation and chock the a ate box to Indicate reason tor submittal. | ||
FACIUTY Shearon Harris Nuclear Power Plant UCENSEE Carolina Power and Light Company | FACIUTY DOCKET NUMBER Shearon Harris Nuclear Power Plant so 400 UCENSEE DATE Carolina Power and Light Company 3/1 5/99 This is to certify thaL | ||
NAME (or other krentryrcatbn) | : 1. lho above named facility liconsoo Is using a simulation facility conatstkig sotely of a plantuoforoncod sknvtator that moots tho roqukomonts of 10 CFA 55.45. | ||
AND LOCATION OF | : 2. Documentation Is ava8abio tor NRO review in accordanco with 10 cFA 55.45(b). | ||
DESCRIPTION OF PERFORMANCE TESTING COMPLETED.(Attach addkbnaI pages as necessary and | : 3. This sknutatkxt facility moots tho guidance contained in ANSIJANS 3 5.1985 or ANSI/ANS 3 5.1993. as ondorsod by NRC Regulatory Guide 1.149. | ||
DEscRI pTIDN oF pERFoRMANGE TEsTING To BE coNDUOTED.(Attach addabnal pages as necessary and | lt there aro any EXCEPTIONS to Iho certification ot this item CHECK HERE [ X ] and desc6be tully on additional pages as necessary. | ||
testhg pron suhmlted on a previous cert yicatbra)DESCRIPTION OF PERFORMANCE TESTING PLAN CHANGE (Artarh addkknar pages as necessly and krentify the item descrptbn behg conthuaf)A complete, revised test plan is attached as Appendix A,"Schedule for Annual Operability Tests";and Appendix B,"Schedule of Malfunction Tests".See Section 4.1,"Certification Test Schedule" for an explanation of the changes.RECERTIFICATION (Descnbe corrective acr Jons taken.anach resorts ol compiefed periormanco testhg h acc>>nfanco wrrrr 10 CFR 5545(b)(5)(v).(Attach addsbnaf pages as necossary and ident yy the kern descrrprbn behg conthued)Any false statement or omission In this document, indvdng attachments, may bo subject to civil and criminal sanctions. | NAME (or other krentryrcatbn) AND LOCATION OF SIMULATIONFACIUlY. | ||
I cortify undor penalty of porjury that the tnformadon In this document and attachmonts Is truo and corrocL SIGNATURE UTHORIZED A P SENTATIVE Vice President-Harris Nuclear Plant | Harris Simulator - Harris Energy and Environmental Center 3932 New Hill - Holleman Road New Hill, North Carolina 27562-0327 SIMULATION FACIUlYPERFORMANCE TEST ABSTRACTS ATTACHED. (For performance tests conducted h tire pen'od orxrng wirrr tire date of firJs cenifcatbra) | ||
An upgrade to the simulation computer system was completed approximately two months before this submittal to make the system Y2K compliant. | DESCRIPTION OF PERFORMANCE TESTING COMPLETED. (Attach addkbnaI pages as necessary and kfentlfythe lorn descrr)rtbn bang conrnued) | ||
The documentation contained herein is intended to constitute sufficient basis for retention of the certification of the Harris Simulator. | Abstracts for tests added since the 1995 Certification Quadrennial Report are attached. See Section 4.0, "Simulator Tests," and Appendix D, "Simulator Certification Test Abstracts." | ||
Simulator Confi uration Control A Simulator Review Group (SRG)is tasked with oversight of changes, potential enhancements, identified discrepancies, and proposed upgrades for implementation or resolution on the Harris Simulator. | slMULATIQNFAGIUTY pERFDRMANc6 TEsllNG scHEDULE ATTADHED. (For tire conduct olapproxrmereiy25 percent orperrormanco tests per year ior too lour year perbd commoncng wkh fire dare of trris ceciTeatJon.) | ||
The SRG is comprised of the Manager of Operations, Supervisor of License Operator Training, Lead Instructor for Operator Initial Training (OIT)and Licensed Operator Continuing Training (LOCT), and a Program Lead from Simulator Support (functioning as facilitator) or their designees. | DEscRI pTIDN oF pERFoRMANGE TEsTING To BE coNDUOTED. (Attach addabnal pages as necessary and kbnliryfire flem descn'prbn behg contnued) | ||
Other training and plant operations personnel may also participate in SRG meetings as a function of the topics to be addressed. | See Section 4.0, "Simulator Tests"; Appendix A, "Schedule of Annual Operability Tests"; and Appendix B, "Schedule of Malfunction Tests." | ||
Plant modifications are reviewed by a member of the Operator Training program.Those with clear impact to the scope of simulation require no further review and are implemented. | pERFQRMANGE TEsTING pLAN cHANGE (For any modilcarbn to a performanr>> testhg pron suhmlted on a previous cert yicatbra) | ||
Those changes with questionable impact are presented to the SRG for a training value assessment. | DESCRIPTION OF PERFORMANCE TESTING PLAN CHANGE (Artarh addkknar pages as necessly and krentify the item descrptbn behg conthuaf) | ||
This SRG review ensures that differences between the plant and the simulator do not detract from training.The SRG also reviews outstanding deficiencies for impact on training to ensure high priority items are properly scheduled for resolution. | A complete, revised test plan is attached as Appendix A, "Schedule for Annual Operability Tests"; | ||
The SRG provides guidance for scheduling discrepancy resolutions and modification implementations. | and Appendix B, "Schedule of Malfunction Tests". See Section 4.1, "Certification Test Schedule" for an explanation of the changes. | ||
Exce tions to ANSI/ANS-3.5-1985 Standard Exceptions listed below, except for Exceptions | RECERTIFICATION (Descnbe corrective acr Jons taken. anach resorts ol compiefed periormanco testhg h acc>>nfanco wrrrr 10 CFR 5545(b)(5)(v). | ||
¹3 and¹7, were identified at the time of the initial certification of the Harris Simulator's compliance with 10CFR55.45(b) stipulations. | (Attach addsbnaf pages as necossary and ident yy the kern descrrprbn behg conthued) | ||
Exceptions | Any false statement or omission In this document, indvdng attachments, may bo subject to civil and criminal sanctions. I cortify undor penalty of porjury that the tnformadon In this document and attachmonts Is truo and corrocL SIGNATURE UTHORIZED A P SENTATIVE DATF. | ||
¹3 and¹7 were identified in the 1995 quadrennial report.At those times the SRG reviewed the list of exceptions to ensure that the exception did not detrimentally impact the license operator training program and did not prevent 10CFR55 compliant simulator examinations (operating tests)from being conducted. | accot Vice President - Harris Nuclear Plant with 10 CFA 55.5. Ccmmunlcations, this torm shall be submitted lo the NRC as follows: | ||
The exceptions identified in this section are listed by ANSI-3.5 reference and subject.The justification for Page 4 of 33 each exception is included.1.ANS Section 3.1.1(7) | 3 i'q YMAILADDRESSED TO: DIRECTOR, OFFICE OF NUCLEAR REACTOR REGULATION BY DEUVEAYIN PERSON ONE WHITE FUNT NORTH U.S. NUCLEAR REGULATORY COMMISSION TO THE NRC OFFICE AT: 11555 ROCKVILLEPIKE WASHINGTON DC 205554001 ROCKVII.LE, MO NRC FORM 474 (8 1998) PAINTED ON RECYCLED PAPER | ||
Power operations with less than three operating reactor coolant pumps is prohibited by Technical Specifications. | |||
However, the simulator is capable of such operations. | INTRODUCTION General Information The Shearon Harris Nuclear Power Plant Simulator Certification Quadrennial Report is provided to demonstrate compliance with the requirements of 10CFR55.45(b) including compliance with ANSI/ANS-3.5-1985 as implemented by NRC Regulatory Guide 1.149 Rev 1. The subject simulation facility consists solely of a plant reference full-scope simulator, which is the primary vehicle for providing positive, practical license training and examination. An upgrade to the simulation computer system was completed approximately two months before this submittal to make the system Y2K compliant. The documentation contained herein is intended to constitute sufficient basis for retention of the certification of the Harris Simulator. | ||
2.ANS Section 3.1.1(9) | Simulator Confi uration Control A Simulator Review Group (SRG) is tasked with oversight of changes, potential enhancements, identified discrepancies, and proposed upgrades for implementation or resolution on the Harris Simulator. | ||
Tests which were conducted applicable to this section were Estimated Critical Conditions, Shutdown Margin, and Heat Balance.3.ANS Section 3.1.2(11) | The SRG is comprised of the Manager of Operations, Supervisor of License Operator Training, Lead Instructor for Operator Initial Training (OIT) and Licensed Operator Continuing Training (LOCT), and a Program Lead from Simulator Support (functioning as facilitator) or their designees. Other training and plant operations personnel may also participate in SRG meetings as a function of the topics to be addressed. | ||
4.ANS Section 3.1.2(12) | Plant modifications are reviewed by a member of the Operator Training program. Those with clear impact to the scope of simulation require no further review and are implemented. Those changes with questionable impact are presented to the SRG for a training value assessment. This SRG review ensures that differences between the plant and the simulator do not detract from training. The SRG also reviews outstanding deficiencies for impact on training to ensure high priority items are properly scheduled for resolution. The SRG provides guidance for scheduling discrepancy resolutions and modification implementations. | ||
A normal telephone system that emulates the real control room exist for normal operator training and is replaced by a similar system of different colored phones when the simulator is used for Emergency Preparedness drills.A radio simulation is available as well as sound-powered phones.The SRG deemed the provided communications systems to be appropriate.(Ceiling and Lighting)The current ceiling is approximately twenty feet above the simulator panels rather than three feet as in the plant to facilitate visitor viewing of the simulator from above.The lighting provides failure capability and emergency lighting to simulate electrical bus failures.The lighting configuration was altered due to ceiling height differences to provide light intensity level which approximates lighting levels in the plant control room.c.(Noise Levels)Background noise levels in the simulator room is approximately that of the plant control room.A replacement of the simulator room HVAC units occurred since the 1995 Certification Report that established this match in background sound.8.ANS Section 4.1(3) | Exce tions to ANSI/ANS-3.5-1985 Standard Exceptions listed below, except for Exceptions ¹3 and ¹7, were identified at the time of the initial certification of the Harris Simulator's compliance with 10CFR55.45(b) stipulations. Exceptions ¹3 and ¹7 were identified in the 1995 quadrennial report. At those times the SRG reviewed the list of exceptions to ensure that the exception did not detrimentally impact the license operator training program and did not prevent 10CFR55 compliant simulator examinations (operating tests) from being conducted. The exceptions identified in this section are listed by ANSI-3.5 reference and subject. The justification for Page 4 of 33 | ||
ANS Section 4.1(4) | |||
The criteria used for comparison between the simulator and plant parameters was 2 percent (10 percent for non-critical parameters) of the associated instrument loop range.In addition, the parameter variation must not detract from training.The standard states to use 2 percent (10 percent for noncritical parameters) of the reference plant parameter. | each exception is included. | ||
Using the percentage of instrument loop range is more limiting and more realistically represents the difference which can be noted by the operators. | : 1. ANS Section 3.1.1(7) Operations at Less than Full Reactor Coolant System (RCS) Flow This section is not applicable. Power operations with less than three operating reactor coolant pumps is prohibited by Technical Specifications. However, the simulator is capable of such operations. | ||
This method was reviewed and approved by the SRG at the time of the original certification submittal. | : 2. ANS Section 3.1.1(9) Core Performance Testing Rod worth and reactivity coefficient measurement procedures were not performed as a part of the certification test program. These tests are performed by Reactor Engineering, not Operations. | ||
9.ANS Section Appendix B.1 | Tests which were conducted applicable to this section were Estimated Critical Conditions, Shutdown Margin, and Heat Balance. | ||
Page 6 of 33 1.0 SIMULATOR INFORMATION 1.1 Simulator General 1.1.1 Owner | : 3. ANS Section 3.1.2(11) Protective System Channel Failures Protective system channel failures have been replaced by component overrides consisting of process instrumentation transmitter, relay, and bistable failures. This enhancement provides more credible failures for the student to diagnose or respond to. The instructor has more explicit control over these devices than had been available through the deleted malfunctions. | ||
1.1.3 Simulator Supplier: | : 4. ANS Section 3.1.2(12) Control Rod Failures Drifting rods are not simulated as this type of failure is not relevant to the rod mechanisms used at the Harris Nuclear Plant. | ||
There are other minor differences with carpet color, location/style of handrails, type of furniture, and shape/size of status boards.The differences have been reviewed and accepted by the Simulator Review Group.1.2.2 Panels and Equipment Control room panels are included in the simulation except the Condensate Booster Pump Panel, Seismic Monitoring Panel, and the Digital Metal Impact Monitoring Panel.The Reactivity Computer, which was only used by the reactor engineers at the time of refueling, has also been omitted.Connections for the portable device that they actually use during physics testing are available. | : 5. ANS Section 3.1.2(25) Reactor Pressure Control System Failure including Turbine Bypass Failure (BWR) | ||
These panels and equipment were omitted based on training value assessment. | This item is specifically related to Boiling Water Reactors. | ||
Page 7 of 33 | : 6. ANS Section 3.2.1 Degree of Panel Simulation The Seismic Monitoring, Condensate Booster Pump, and Digital Metal Impact Monitoring Panels were not included in the simulation based on an assessment of the training value of having these panels. Training in this area can be sufficiently accomplished utilizing the actual panels in the Harris Plant control room. | ||
~~ | : 7. ANS Section 3.2.3 Control Room Environment Page 5 of 33 | ||
Classroom and on-the-job training are the means to provide training on these systems.With the exception of the Emergency Response Facility Information System (ERFIS)peripherals, no panels outside the control room are included in the simulation facility.Communications equipment capabilities essential to operator training and examination are provided in the simulation facility.Telephone and radio communications terminate in the instructor station rather than various locations in the plant.The instructor plays the role of appropriate plant personnel, interacts with the operating crew, and performs the local operator actions requested. | |||
Dialed or automatic ring-down telephone calls made by the operating crew give a lighted indication in the instructor station as to who was the intended recipient of the call.1.2.3 Systems ,Operative plant systems assessable from the control room are simulated except for Seismic Monitoring, Digital Metal Impact Monitoring, and Waste Processing. | a'. (Communications Systems) A telephone page system used at the plant to page outside operators was evaluated by the SRG and determined to be unnecessary in the simulation. | ||
A normal telephone system that emulates the real control room exist for normal operator training and is replaced by a similar system of different colored phones when the simulator is used for Emergency Preparedness drills. A radio simulation is available as well as sound-powered phones. The SRG deemed the provided communications systems to be appropriate. | |||
(Ceiling and Lighting) The current ceiling is approximately twenty feet above the simulator panels rather than three feet as in the plant to facilitate visitor viewing of the simulator from above. The lighting provides failure capability and emergency lighting to simulate electrical bus failures. The lighting configuration was altered due to ceiling height differences to provide light intensity level which approximates lighting levels in the plant control room. | |||
: c. (Noise Levels) Background noise levels in the simulator room is approximately that of the plant control room. A replacement of the simulator room HVAC units occurred since the 1995 Certification Report that established this match in background sound. | |||
: 8. ANS Section 4.1(3) Steady State Accuracy Tests (Critical Parameters) | |||
ANS Section 4.1(4) Steady State Accuracy Tests (Non-Critical Parameters) | |||
The criteria used for comparison between the simulator and plant parameters was 2 percent (10 percent for non-critical parameters) of the associated instrument loop range. In addition, the parameter variation must not detract from training. The standard states to use 2 percent (10 percent for noncritical parameters) of the reference plant parameter. Using the percentage of instrument loop range is more limiting and more realistically represents the difference which can be noted by the operators. This method was reviewed and approved by the SRG at the time of the original certification submittal. | |||
: 9. ANS Section Appendix B.1 BWR Simulator Operability Test This item is specifically related to Boiling Water Reactors. | |||
: 10. ANS Section Appendix B.2.1(2) Steady State Performance Steam generator temperature was not measured as this parameter is only applicable to once-through type steam generators. | |||
Page 6 of 33 | |||
1.0 SIMULATOR INFORMATION 1.1 Simulator General | |||
====1.1.1 Owner==== | |||
Carolina Power & Light Company 1.1.2 Reference Plant/Unit: Shearon Harris Nuclear Power Plant, Unit ¹I, Westinghouse 3-Loop PWR 1.1.3 Simulator Supplier: Westinghouse Electric Corporation with major upgrades by S3 Technologies (currently GSE Systems) 1.1.4 Ready-for-Training Date: Initial December 20, 1985 Upgrade December 27, 1994 Year 2000 Upgrade January 11, 1999 1.1.5 Type of Report: Quadrennial (4-Year) Report 1.2 Simulator Control Room 1.2.1 Physical Arrangement The simulator control room is approximately 80 percent as large as the Harris Plant control room. The simulated control room panels are the same size and color as found in the Harris Plant control room. Some of the panels have been moved or angled slightly to accommodate space restrictions and the protrusion of the instructor station area into the simulator control room. The simulated panels are in the same relative location as in the Harris Plant control room and provide the same visual perspective as in the plant. The raised platform in the middle of the "at the controls" area is approximately 80 percent the size of the platform in the plant due to room size restrictions. There are other minor differences with carpet color, location/style of handrails, type of furniture, and shape/size of status boards. The differences have been reviewed and accepted by the Simulator Review Group. | |||
1.2.2 Panels and Equipment Control room panels are included in the simulation except the Condensate Booster Pump Panel, Seismic Monitoring Panel, and the Digital Metal Impact Monitoring Panel. The Reactivity Computer, which was only used by the reactor engineers at the time of refueling, has also been omitted. Connections for the portable device that they actually use during physics testing are available. These panels and equipment were omitted based on training value assessment. | |||
Page 7 of 33 | |||
~ ~ | |||
Classroom and on-the-job training are the means to provide training on these systems. | |||
With the exception of the Emergency Response Facility Information System (ERFIS) peripherals, no panels outside the control room are included in the simulation facility. | |||
Communications equipment capabilities essential to operator training and examination are provided in the simulation facility. Telephone and radio communications terminate in the instructor station rather than various locations in the plant. The instructor plays the role of appropriate plant personnel, interacts with the operating crew, and performs the local operator actions requested. | |||
Dialed or automatic ring-down telephone calls made by the operating crew give a lighted indication in the instructor station as to who was the intended recipient of the call. | |||
1.2.3 Systems | |||
,Operative plant systems assessable from the control room are simulated except for Seismic Monitoring, Digital Metal Impact Monitoring, and Waste Processing. | |||
These systems are omitted based on training value assessment. | These systems are omitted based on training value assessment. | ||
1.2.4 Environment Some differences exist in the ceiling, and lighting between the simulator and the Harris Plant control rooms (see Exception¹7).The simulator control room is designed to include a viewing platform for visitors to the Harris Energy and Environmental Center and an instructor station viewing area.This results in a difference between the simulator and main control room ceiling and lighting 1.3 Simulator Instructor Interface 1.3.1 General Instructor System The Harris Simulator has an instructor booth (or station)that is separated from the simulator control room and out of sight (one way mirrored glass)from the operator's view.The instructor is able to observe the actions of the operators in the simulator control room from the booth.A multiple camera audio/video system is provided in the simulator facility to allow better analysis of operator activity.The audio/video system has been reviewed and accepted by the SRG as a no-training impact difference. | 1.2.4 Environment Some differences exist in the ceiling, and lighting between the simulator and the Harris Plant control rooms (see Exception ¹7). The simulator control room is designed to include a viewing platform for visitors to the Harris Energy and Environmental Center and an instructor station viewing area. This results in a difference between the simulator and main control room ceiling and lighting 1.3 Simulator Instructor Interface 1.3.1 General Instructor System The Harris Simulator has an instructor booth (or station) that is separated from the simulator control room and out of sight (one way mirrored glass) from the operator's view. The instructor is able to observe the actions of the operators in the simulator control room from the booth. A multiple camera audio/video system is provided in the simulator facility to allow better analysis of operator activity. The audio/video system has been reviewed and accepted by the SRG as a no-training impact difference. | ||
Page 8 of 33 The instructor has the capability of operating the simulator from the instructor's booth or from a terminal in the simulated control room.Hand held remote operating controls are also available for inserting pre-planned simulation functions. | Page 8 of 33 | ||
1.3.2 Initial Conditions (IC)The simulation has storage for up to 200 Initial Condition sets.A controlled set of ICs are stabilized and re-snapped after each major simulator modification/upgrade period but prior to training restart.These ICs contain a minimum of 3 power levels at 3 times in core life (BOL, MOL, and EOL), hot standby, and other primary training starting points selected to satisfy training objectives. | |||
Training Administrative Procedures provides a method of controlling simulator initial conditions. | The instructor has the capability of operating the simulator from the instructor's booth or from a terminal in the simulated control room. Hand held remote operating controls are also available for inserting pre-planned simulation functions. | ||
1.3.3 Malfunction Selection The simulation contains capability to insert any number of discrete malfunctions individually or in combination. | 1.3.2 Initial Conditions (IC) | ||
The selection of malfunctions may be accomplished through command line entry, menu selection or available simulation dynamic PAIDs.Malfunction severity, time of activation, and time to reach selected severity may be entered through the instructor system and modified as training objectives dictate.Any number of malfunctions may be active at the same time.Malfunctions may also be initiated based on specific plant conditions. | The simulation has storage for up to 200 Initial Condition sets. A controlled set of ICs are stabilized and re-snapped after each major simulator modification/upgrade period but prior to training restart. These ICs contain a minimum of 3 power levels at 3 times in core life (BOL, MOL, and EOL), hot standby, and other primary training starting points selected to satisfy training objectives. Training Administrative Procedures provides a method of controlling simulator initial conditions. | ||
1.3.3 Malfunction Selection The simulation contains capability to insert any number of discrete malfunctions individually or in combination. The selection of malfunctions may be accomplished through command line entry, menu selection or available simulation dynamic PAIDs. | |||
Malfunction severity, time of activation, and time to reach selected severity may be entered through the instructor system and modified as training objectives dictate. Any number of malfunctions may be active at the same time. | |||
Malfunctions may also be initiated based on specific plant conditions. | |||
Deactivation and time delayed deactivation of malfunctions are also facilitated. | Deactivation and time delayed deactivation of malfunctions are also facilitated. | ||
The current status of selected malfunctions is readily available to the instructor. | The current status of selected malfunctions is readily available to the instructor. | ||
1.3.4 Simulator Overrides 1.3.4.1 Panel Overrides The instructor has the ability to override any simulated device on the control room panels.For example, a meter may be driven to any value, a light may be turned off or on, or a switch may be failed closed.The override may be inserted with a time delay, and analog values may be ramped in over a specified time band.Page 9 of 33 | 1.3.4 Simulator Overrides 1.3.4.1 Panel Overrides The instructor has the ability to override any simulated device on the control room panels. For example, a meter may be driven to any value, a light may be turned off or on, or a switch may be failed closed. The override may be inserted with a time delay, and analog values may be ramped in over a specified time band. | ||
~~k 1.3.4.2 Transmitter Overrides Most transmitters that have meters on the MCB or others may be overridden or failed to any value in it's range so that corresponding bistable trips and automatic actions will occur.The bistables may also be overridden directly.As with malfunctions, the override may be ramped in over a specified time period.This capability was expanded since the original certification submittal resulting in several of the previously certified malfunctions being no longer necessary. | Page 9 of 33 | ||
1.3.4.3 Relay Overrides Selected relays may be overridden or failed to a specified state.This capability was added since simulator certification and eliminated the need for related system malfunctions, some of which had been certified as a part of the original submittal. | |||
1.3.4.4 Selection of Overrides The selection of overrides may be accomplished through command line entry, through a menu of available overrides or from dynamic system P&IDs.1.3.5 Local Operator Actions (LOAs)Local operator actions needed to provide training are available through the same selection methods as malfunctions and overrides. | ~ ~ k 1.3.4.2 Transmitter Overrides Most transmitters that have meters on the MCB or others may be overridden or failed to any value in it's range so that corresponding bistable trips and automatic actions will occur. The bistables may also be overridden directly. As with malfunctions, the override may be ramped in over a specified time period. This capability was expanded since the original certification submittal resulting in several of the previously certified malfunctions being no longer necessary. | ||
Plant procedures are reviewed to identify needed changes to these LOAs.Additional LOAs identified by training within the scope of simulation are added as needed.1.3.6 Parameter and Equipment Monitoring The graphical capabilities of the instructor system facilitate visual monitoring of the simulation through dynamic P&IDs and panel mimic displays.Plot capabilities for up to 400 parameters simultaneously is available through the instructor system.The standard parameter versus time and X-Y plots are available along with the capability to trend against previously recorded trends, as is necessary to compare a previous test of simulator performance against the current simulator performance. | 1.3.4.3 Relay Overrides Selected relays may be overridden or failed to a specified state. This capability was added since simulator certification and eliminated the need for related system malfunctions, some of which had been certified as a part of the original submittal. | ||
Page 10 of 33 | 1.3.4.4 Selection of Overrides The selection of overrides may be accomplished through command line entry, through a menu of available overrides or from dynamic system P&IDs. | ||
~ | 1.3.5 Local Operator Actions (LOAs) | ||
The time between snaps of backtracks can be changed to lengthen or shorten this time.The capability for"nested" batch files allow multiple computer aided exercises to run concurrently, which facilitates simulation of a test (such as a maintenance surveillance test)being run on a system in the plant while other normal plant operations continue without required instructor interaction. | Local operator actions needed to provide training are available through the same selection methods as malfunctions and overrides. Plant procedures are reviewed to identify needed changes to these LOAs. Additional LOAs identified by training within the scope of simulation are added as needed. | ||
1.3.6 Parameter and Equipment Monitoring The graphical capabilities of the instructor system facilitate visual monitoring of the simulation through dynamic P&IDs and panel mimic displays. Plot capabilities for up to 400 parameters simultaneously is available through the instructor system. The standard parameter versus time and X-Y plots are available along with the capability to trend against previously recorded trends, as is necessary to compare a previous test of simulator performance against the current simulator performance. | |||
Page 10 of 33 | |||
" | |||
~ | |||
1.3.7 Simulator Special Features Industry standard capabilities are available in the areas of switch check status/override, run, freeze, backtrack, replay, snapshot, fast time for certain parameters, slow time, Computer Aided Exercises, and simulation limit exceeded warnings. | |||
Backtrack capabilities allow for four hours of storage at 2 minute intervals. The time between snaps of backtracks can be changed to lengthen or shorten this time. The capability for "nested" batch files allow multiple computer aided exercises to run concurrently, which facilitates simulation of a test (such as a maintenance surveillance test) being run on a system in the plant while other normal plant operations continue without required instructor interaction. | |||
In compliance with ANSI/ANS-3.5 section 4.3, the simulator operating limits exceeded warning to the instructor exist and includes the following: | In compliance with ANSI/ANS-3.5 section 4.3, the simulator operating limits exceeded warning to the instructor exist and includes the following: | ||
-Containinent Temperature | - Containinent Temperature > 400 degrees | ||
>400 degrees-Containment Pressure>60 psia-RCS Pressure>2700 psia-Thermocouple Temperature | - Containment Pressure > 60 psia | ||
>2500 degrees-RCS Boron<0 ppm-Steam Generator Pressure>1400 psia-Steam Generator Steam Flow>12.6 MPPH-Core Power>120%-Condenser Pressure>.20 psia 1.4 Operating Procedures for the Reference Plant The Simulator Control Room utilizes a selected set of controlled procedures identical to those used in the Harris Plant control room.1.5 Changes Since Last Report 1.5.1 Plant Modifications Numerous modifications to the plant have occurred since the last submittal which impact the simulator. | - RCS Pressure > 2700 psia | ||
The scope of the modifications was significantly less than in the previous certification cycle.Plant modifications continue to be reviewed for simulator and training impact.The more significant modifications are listed below: Page 11 of 33 | - Thermocouple Temperature > 2500 degrees | ||
-Reactor core fuel cycles 7, 8 and 9-ERFIS display system replacement (RTIN)1.5.2 Simulator Upgrades One operating system upgrade has occurred since the last submittal. | - RCS Boron < 0 ppm | ||
That upgrade was completed and the system declared"Ready For Training" on 1/11/99.This operating system upgrade to SGI IRIX 6.5 made the simulator computers Y2K compliant. | - Steam Generator Pressure > 1400 psia | ||
The operating system upgrade was followed by an extensive Performance Test performed in conjunction with the Annual Operability Test.The peripheral computer systems such as ERFIS and the Radiation Monitoring System (RMS)are being addressed by the plant's Information Technology (IT)group's Y2K compliance plan.With the 1994 GSE Systems upgrade graphic based code generator modeling tools were purchased. | - Steam Generator Steam Flow > 12.6 MPPH | ||
Those tools have been used to build improved themo-hydraulic models of the following systems:~Auxiliary Feed-water (AFW)~Residual Heat Removal (RHR)~Pressurizer Spray~Charging and Safety Injection System (SIS)~Letdown Each of these system upgrades was followed by a specific series of performance test prior to being turned over to training.1.5.2.1 Other Upgrades An ongoing effort to replace the generic controllers with system specific controllers continues. | -Core Power > 120% | ||
This effort allows for the use of plant specific settings since the mathematics of the simulated controller matches that of the plant.Page 12 of 33 2.0 SIMULATOR DESIGN DATABASE The original simulator design data base consists of plant reference drawings (logics, CWDs, PEcIDs), FSAR, Plant Operating Manuals (POMs)including system descriptions, and system test results.A complete set of these reference documents is available for use in simulator modification, troubleshooting, and updating.The design data base was pre-start-up data.Updated Harris Plant design data subsequently obtained is being used to perform simulator modifications. | - Condenser Pressure >.20 psia 1.4 Operating Procedures for the Reference Plant The Simulator Control Room utilizes a selected set of controlled procedures identical to those used in the Harris Plant control room. | ||
This design data is maintained as part of the Simulator Update Design Data.Plant modification/change data have continued to be collected and analyzed for simulator applicability through formally controlled distribution of Engineering Service Requests (ESR's), documentation updates, and plant procedure changes.Page 13 of 33 | 1.5 Changes Since Last Report 1.5.1 Plant Modifications Numerous modifications to the plant have occurred since the last submittal which impact the simulator. The scope of the modifications was significantly less than in the previous certification cycle. Plant modifications continue to be reviewed for simulator and training impact. The more significant modifications are listed below: | ||
~~ | Page 11 of 33 | ||
3.0 SIMULATOR DISCREPANCY AND UPGRADE PROGRAMS 3.1 Simulator Service Request Program Discrepancies noted in the simulator during testing or training sessions are documented by a Simulator Service Request (SSR).The SSR is used by the simulator staff to evaluate the problem and to identify corrective actions.Documentation used to research the problems is attached to the SSR for inclusion as part of the Simulator Update Design Data Base.3.2 Engineering Service Request Implementation Engineering Service Requests (ESRs)which are approved for work and which have the potential to impact the simulator, are reviewed by the staff concurrent with the plant review for applicability to the simulator. | |||
ESR's which are applicable to the scope of simulation are used to generate a Simulator Service Request.Plant modification SSRs are scheduled to be completed in the simulator within twelve months of their operability in the plant.If requested by the plant operations staff, the modification may be performed in the simulator prior to its completion in the plant in order that the operators may be trained prior to plant modification completion. | - Reactor core fuel cycles 7, 8 and 9 | ||
This is particularly true for many modifications performed during a scheduled plant outage so as to be available for training operators prior to plant start-up.The package is maintained as part of the simulator Update Design Data Base.3.3 Simulator Configuration Management System The simulator Configuration Management System (CMS)is a PC-based management and design control system which is used to track the simulator's consistency with Harris Plant, performance or certification testing, modifications, and maintenance. | - ERFIS display system replacement (RTIN) 1.5.2 Simulator Upgrades One operating system upgrade has occurred since the last submittal. That upgrade was completed and the system declared "Ready For Training" on 1/11/99. This operating system upgrade to SGI IRIX 6.5 made the simulator computers Y2K compliant. The operating system upgrade was followed by an extensive Performance Test performed in conjunction with the Annual Operability Test. | ||
This system is used for recording and tracking plant changes and Simulator Service Requests.Based on the relative importance of the modification or severity of the problem, a four-level schedule system is applied to the SSR or SMR.This schedule is used to determine the order in which items are worked.When SSRs are completed, their status is updated in the CMS computer.The CMS computer is used to provide necessary reports as to the status of outstanding plant modifications and service requests.Page 14 of 33 4.0 | The peripheral computer systems such as ERFIS and the Radiation Monitoring System (RMS) are being addressed by the plant's Information Technology (IT) group's Y2K compliance plan. | ||
The tests were based on Harris Plant data, similar plant performance data, best estimate analysis, or a panel of experts.The selection of simulator performance test topics was determined based on ANSVANS-3.5-1985 requirements and a comprehensive review of the licensed operator training program.Listed in Appendix C are those certification test deficiencies identified during testing that remain unresolved at the time of this report submittal. | With the 1994 GSE Systems upgrade graphic based code generator modeling tools were purchased. Those tools have been used to build improved themo-hydraulic models of the following systems: | ||
4.1 Certification Test Schedule The test programs in place at Harris Nuclear Plant (HNP)for the past two certification cycles have exceeded the requirements of ANSI 3.5 1985 and Regulatory Guide 1.149 (1987).Because of improvements in the simulator model fidelity and simulator reliability this additional testing is no longer considered necessary. | ~ Auxiliary Feed-water (AFW) | ||
Accordingly, the annual test program was reduced in scope but continues to meet the requirements of the applicable standards and guides.4.1.1 Annual Operability Tests With this submittal, the requirements of ANSI 3.5 1985 were reviewed and the total number of annual operability test was reduced to those test specified in ANSI 3.5 1985 Appendix B.The annual operability tests program now includes the simulator Real Time Test, the Steady State Stability and Accuracy Tests, and the Transient Tests.These tests are listed in Appendix A.4.1.2 Malfunction Tests Malfunctions and component overrides available on the simulator and incorporated in the operator training program have been formally tested via an individual performance test, typically at the time of inclusion. | ~ Residual Heat Removal (RHR) | ||
In addition, scenario validation performed at the time that a scenario is added verifies that the malfunctions and component failures function as expected.With this submittal, the requirements of ANSI 3.5 1985 were reviewed and the total number of malfunction test to be performed annually was reduced.Only the malfunctions included in the simulation to meet the requirements of ANS/ANSI 3.5-1985 Section 3.1.2 are tested on a periodic basis.These tests are scheduled such that approximately 25 percent of these required malfunctions are tested each year.Page 15 of 33 The number of performance tests will be adjusted as malfunctions are added to or deleted from the certification test program as dictated by operator training program requirements. | ~ Pressurizer Spray | ||
These additions and/or deletions will be noted in subsequent quadrennial reports, however, the test program will be maintained in compliance with ANSI/ANS-3.5-1985. | ~ Charging and Safety Injection System (SIS) | ||
Appendix B lists the malfunctions which meet this requirement and schedule for performing them over the next four years.4.2 Simulator Test Procedure to ANSI/ANS-3.5-1985 Cross-Reference Appendix E reflects those malfunctions and malfunction test used to show compliance to the ANSI 3.5 1985 section 3.1.2 list of required malfunctions. | ~ Letdown Each of these system upgrades was followed by a specific series of performance test prior to being turned over to training. | ||
4.3 Summary of Certification Deficiencies Certification deficiencies are listed in Appendix C to this report.To be listed in this appendix, test results must be identified as either"Satisfactory with Deficiencies" or"Unsatisfactory". | 1.5.2.1 Other Upgrades An ongoing effort to replace the generic controllers with system specific controllers continues. This effort allows for the use of plant specific settings since the mathematics of the simulated controller matches that of the plant. | ||
Deficiencies against these tests will be resolved based on training impact in accordance with the four-level scheduling system outlined in Harris Training Administrative Procedures. | Page 12 of 33 | ||
There are no tests identified as"Unsatisfactory" at this time.4.4 Certification Test Abstracts Abstracts of the certification tests were included in the original certification submittal or subsequent quadrennial reports.Abstracts for those new tests identified in the above appendix are attached to this report.Page 16 of 33 APPENDIX A SCHEDULE OF | |||
2.0 SIMULATOR DESIGN DATABASE The original simulator design data base consists of plant reference drawings (logics, CWDs, PEcIDs), FSAR, Plant Operating Manuals (POMs) including system descriptions, and system test results. A complete set of these reference documents is available for use in simulator modification, troubleshooting, and updating. The design data base was pre-start-up data. | |||
Updated Harris Plant design data subsequently obtained is being used to perform simulator modifications. This design data is maintained as part of the Simulator Update Design Data. | |||
Plant modification/change data have continued to be collected and analyzed for simulator applicability through formally controlled distribution of Engineering Service Requests (ESR's), | |||
documentation updates, and plant procedure changes. | |||
Page 13 of 33 | |||
~ ~ | |||
3.0 SIMULATOR DISCREPANCY AND UPGRADE PROGRAMS 3.1 Simulator Service Request Program Discrepancies noted in the simulator during testing or training sessions are documented by a Simulator Service Request (SSR). The SSR is used by the simulator staff to evaluate the problem and to identify corrective actions. Documentation used to research the problems is attached to the SSR for inclusion as part of the Simulator Update Design Data Base. | |||
3.2 Engineering Service Request Implementation Engineering Service Requests (ESRs) which are approved for work and which have the potential to impact the simulator, are reviewed by the staff concurrent with the plant review for applicability to the simulator. ESR's which are applicable to the scope of simulation are used to generate a Simulator Service Request. | |||
Plant modification SSRs are scheduled to be completed in the simulator within twelve months of their operability in the plant. If requested by the plant operations staff, the modification may be performed in the simulator prior to its completion in the plant in order that the operators may be trained prior to plant modification completion. This is particularly true for many modifications performed during a scheduled plant outage so as to be available for training operators prior to plant start-up. The package is maintained as part of the simulator Update Design Data Base. | |||
3.3 Simulator Configuration Management System The simulator Configuration Management System (CMS) is a PC-based management and design control system which is used to track the simulator's consistency with Harris Plant, performance or certification testing, modifications, and maintenance. This system is used for recording and tracking plant changes and Simulator Service Requests. Based on the relative importance of the modification or severity of the problem, a four-level schedule system is applied to the SSR or SMR. This schedule is used to determine the order in which items are worked. When SSRs are completed, their status is updated in the CMS computer. The CMS computer is used to provide necessary reports as to the status of outstanding plant modifications and service requests. | |||
Page 14 of 33 | |||
4.0 SIMULATORTESTS The simulator certification testing is carried out in accordance with the Simulator Certification test schedule. The testing is typically accomplished by SRO licensed or certified individuals using test procedures developed by currently or previously licensed or certified personnel, engineers or others as appropriate. The tests were based on Harris Plant data, similar plant performance data, best estimate analysis, or a panel of experts. The selection of simulator performance test topics was determined based on ANSVANS-3.5-1985 requirements and a comprehensive review of the licensed operator training program. Listed in Appendix C are those certification test deficiencies identified during testing that remain unresolved at the time of this report submittal. | |||
4.1 Certification Test Schedule The test programs in place at Harris Nuclear Plant (HNP) for the past two certification cycles have exceeded the requirements of ANSI 3.5 1985 and Regulatory Guide 1.149 (1987). Because of improvements in the simulator model fidelity and simulator reliability this additional testing is no longer considered necessary. Accordingly, the annual test program was reduced in scope but continues to meet the requirements of the applicable standards and guides. | |||
4.1.1 Annual Operability Tests With this submittal, the requirements of ANSI 3.5 1985 were reviewed and the total number of annual operability test was reduced to those test specified in ANSI 3.5 1985 Appendix B. The annual operability tests program now includes the simulator Real Time Test, the Steady State Stability and Accuracy Tests, and the Transient Tests. These tests are listed in Appendix A. | |||
4.1.2 Malfunction Tests Malfunctions and component overrides available on the simulator and incorporated in the operator training program have been formally tested via an individual performance test, typically at the time of inclusion. In addition, scenario validation performed at the time that a scenario is added verifies that the malfunctions and component failures function as expected. With this submittal, the requirements of ANSI 3.5 1985 were reviewed and the total number of malfunction test to be performed annually was reduced. Only the malfunctions included in the simulation to meet the requirements of ANS/ANSI 3.5 -1985 Section 3.1.2 are tested on a periodic basis. These tests are scheduled such that approximately 25 percent of these required malfunctions are tested each year. | |||
Page 15 of 33 | |||
The number of performance tests will be adjusted as malfunctions are added to or deleted from the certification test program as dictated by operator training program requirements. These additions and/or deletions will be noted in subsequent quadrennial reports, however, the test program will be maintained in compliance with ANSI/ANS-3.5-1985. Appendix B lists the malfunctions which meet this requirement and schedule for performing them over the next four years. | |||
4.2 Simulator Test Procedure to ANSI/ANS-3.5-1985 Cross-Reference Appendix E reflects those malfunctions and malfunction test used to show compliance to the ANSI 3.5 1985 section 3.1.2 list of required malfunctions. | |||
4.3 Summary of Certification Deficiencies Certification deficiencies are listed in Appendix C to this report. To be listed in this appendix, test results must be identified as either "Satisfactory with Deficiencies" or "Unsatisfactory". Deficiencies against these tests will be resolved based on training impact in accordance with the four-level scheduling system outlined in Harris Training Administrative Procedures. There are no tests identified as "Unsatisfactory" at this time. | |||
4.4 Certification Test Abstracts Abstracts of the certification tests were included in the original certification submittal or subsequent quadrennial reports. Abstracts for those new tests identified in the above appendix are attached to this report. | |||
Page 16 of 33 | |||
APPENDIX A SCHEDULE OF ANNUALOPERABILITYTESTS The following tests are performed on an annual basis. | |||
Real Time Test R~ | |||
RTI'-001 SST-001 SST-002 Computer Real Time Test 100 Percent Power and Accuracy Test 75 Percent Power Accuracy Test SST-003 30 Percent Power Accuracy Test Transient Tests TT-001 Manual Reactor Trip Tl'-002 Simultaneous Trip of all Feedwater Pumps TT-003 Simultaneous Closure of All Main Steam Isolation Valves Ti'-004 Simultaneous Trip of All Reactor Coolant Pumps TT-005 One Reactor Coolant Pump Trip TT-006 Turbine Trip Below P-10 TT-007 Maximum Rate Power Ramp TT-008 Maximum Size RCS Leak Inside Containment With Loss of Off-site Power TT-009 Maximum Size Steam Leak Inside Containment TT-010 Slow RCS Depressurization to Saturation Using PORV's and No SI Page 17 of 33 | |||
APPENDIX B SCHEDULE OF MALFUNCTIONTESTS MALFUNCTIONTESTS FIRST YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1042 Reactor Trip Breakers Fail (B fails to open) 3.1.2(24) | |||
MT-111A Pressurizer Steam Space Leak 3.1.2(lc) | |||
MT-12 NSW Pump Trip and Loss of NSW 3.1.2(6) | |||
MT-1222 Steam Generator Tube Rupture (S/G A) 3.1.2(la) | |||
MT-1231 RCP Trip From 100 Percent Power (RCP-C) 3.1.2(4) | |||
MT-135 RHR Bypass Line Leak (Train A) 3.1.2(7) | |||
MT-42 Logic Cabinet Urgent Failure 3.1.2(13) | |||
MT-44 Stuck Rod 3.1.2(12) | |||
MT-51 Letdown Isolation Valve Failure (1CS-11) 3.1.2(23) | |||
MT-61 Station Blackout 3.1.2(3) | |||
MT-623 Loss of 120-VAC Uninterruptible Power (Power Supply SIII) 3.1.2(3) | |||
MT-710 Condensate Pump Trip (Pump A) 3.1.2(9) | |||
MT-724 Feedline Break Outside Containment 3.1.2(20) | |||
MT-86 Steam Generator Relief Valve Failure (Open) 3.1.2(20) | |||
MT-97 Power Range Channel Detector Failure (Low) 3.1.2(21) | |||
MT-MSC3 Annunciator System Failure 3.1.2(22) | |||
RCS-18 Small Break LOCA 3.1.2(lc) | |||
Page 18 of 33 | |||
MALFUNCTIONTESTS SECOND YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1032 Safety Injection Failure (Train A, Fail to Initiate) 3.1.2(23) | |||
MT-1041 Reactor Trip Breakers Fail (Both Inadvertent Open) 3.1.2(19) | |||
MT-112 Loss of Instrument Air to the Reactor (Reactor Auxiliary 3.1.2(2) | |||
Building) | |||
MT-1132 Pressurizer Relief Valve Failure (444B Without P-11 Interlock) 3.1.2(18) | |||
MT-114 Pressurizer Safety Valve Failure (8010C Open) 3.1.2(1d) | |||
MT-1211 RCS Leak Within Capacity of Charging Pumps 3.1.2(lc) | |||
MT-1212 LOCA Within Capacity of the SI Pumps 3.1.2(1c) | |||
MT-1214A LOCA on RHR 3.1.2(17) | |||
MT-1232 Reactor Coolant Pump Trips (RCP-C) 3.1.2(4) | |||
MT-151 Inadvertent Turbine Trip 3.1.2(15) | |||
MT45 Ejected Rod 3.1.2(12) | |||
MT-571 Letdown Pressure Control Valve Failure (PK-145 Open) 3.1.2(18) | |||
MT-651 Loss of 6.9-KV Emergency Bus (1A-SA) 3.1.2(3) | |||
MT-67 Diesel Generator Failure 3.1.2(3) | |||
MT-712A Turbine Driven Auxiliary Feedwater Pump Trip 3.1.2(23) | |||
MT-719 Main Feedwater Pump Trip (Pump B) 3.1.2(10) | |||
MT-723 Feedline Break Inside Containment 3.1.2(20) | |||
MT-82 Steam Break Outside Containment 3.1.2(20) | |||
Page 19 of 33 | |||
I | |||
~ ~ | |||
MALFUNCTIONTESTS THIRD YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1072 Turbine Runback Failure (Failure to Runback) 3.1.2(22) | |||
MT-1110 Pressurizer Level Control Band Shift Down 3.1.2(22) | |||
MT-113 Loss of Instrument Air to the Containment Building 3.1.2(2) | |||
'T-1211B Uncoupled Control Rod 3.1.2(12) | |||
MT-1213 A RCS Leak (Large Break) 3.1.2(1b) | |||
MT-1221 Steam Generator Tube Leak (S/G B) 3.1.2(1a) | |||
MT-136 RHR Sump Valves Fail to Open 3.1.2(23) | |||
MT-333 Hotwell Level Controller Failure (LC-1901 Low) 3.1.2(5) | |||
MT-34 Loss of Condenser Vacuum 3.1.2(5) | |||
MT-612 Generator Output Breakers Fail to Trip 3.1.2(16) | |||
MT-68 Automatic Voltage Regulator Failure (High) 3.1.2(16) | |||
MT-711A Motor Driven Auxiliary Feedwater Pump Trip 3.1.2(10) | |||
MT-76 Auxiliary Feedwater Flow Control Valve Failure (Open) 3.1.2(23) | |||
MT-81 Steamline Break Inside Containment 3.1.2(20) | |||
MT-815 Main Steam Header Break 3.1.2(20) | |||
MT-91 Source Range Instrument Failure (N31 High) 3.1.2(21) | |||
RCS-6 Median Select Circuit Failure 3.1.2(22) | |||
Page 20 of 33 | |||
MALFUNCTIONTESTS FOURTH YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1015 Diesel Generator Sequencer Fails to Complete Block 1 3.1.2(23) | |||
MT-111 Loss of Instrument Air (Turbine Building) 3.1.2(2) | |||
MT-112A Pressurizer Spray Valve Failure 3.1.2(18) | |||
MT-1211A RCS Fuel Rod Breach 3.1.2(14) | |||
MT-1212A RCS Leakage into an Accumulator 3.1.2(23) | |||
MT-21 Component Cooling Water Pump Trip 3.1.2(8) | |||
MT-22A Loss of CCW to RHR Heat Exchanger 3.1.2(8) | |||
MT-28 Loss of CCW to the Reactor Coolant Pumps 3.1.2(8) | |||
MT-331 Hotwell Level Controller Failure (LC-1900 High) 3.1.2(5) | |||
MT-431 Dropped Rod (One Rod) 3.1.2(12) | |||
MT-512 RCP Number 1 Seal Failure (RCP B) 3.1.2(8) | |||
MT-616 Diesel Generator Breaker Inadvertent Trip 3.1.2(3) | |||
MT-912 Intermediate Range Control Power Fuse Blown 3.1.2(21) | |||
CRF-16 Control Rod Stuck on Trip (NEW) 3.1.2(12) | |||
CVC-30 Charging/Safety Injection Pump Speed Changer Failure (NEW) 3.1.2(23) | |||
MSC-4 Inadvertent Containment Isolation Phase A 3.1.2(22) | |||
SWS-7 Normal Service Water Pump Shaft Shear (NEW) 3.1.2(6) | |||
Page 21 of 33 | |||
APPENDIX C | |||
==SUMMARY== | ==SUMMARY== | ||
OF CE<RTIFICATION DEFICIENCIE<S Performance tests were run as a part of the current (March 1995-March 1999)certification testing program.The resulting deficiencies that remain unresolved at this time are shown below.TEST/RE<SULTS CMS/DR¹TITLE</DE<SCRIPTION MT-1211A 98-261 RCS Fuel Rod Breach The acceptance criteria is 1000X normal and 800X normal was achieved.Efforts are ongoing to determine if the acceptance criteria is correct for a best estimate situation vice a worst case situation of the normal EP environment. | OF CE<RTIFICATION DEFICIENCIE<S Performance tests were run as a part of the current (March 1995 - March 1999) certification testing program. The resulting deficiencies that remain unresolved at this time are shown below. | ||
Page 22 of 33 | TEST/RE<SULTS CMS/DR ¹ TITLE</DE<SCRIPTION MT-1211A 98-261 RCS Fuel Rod Breach The acceptance criteria is 1000X normal and 800X normal was achieved. Efforts are ongoing to determine if the acceptance criteria is correct for a best estimate situation vice a worst case situation of the normal EP environment. | ||
~~ | Page 22 of 33 | ||
1 4 APPENDIX D SIMULATOR | |||
Safety | ~ ~ | ||
1 4 | |||
APPENDIX D SIMULATOR CERTIFICATIONTEST ABSTRACTS This appendix contains a complete list (index) of the performance test performed per schedule, in the previous certification period. Abstracts of these test were included in the previous certification submittals and are not being included in this submittal unless it is one of the tests added in the past four years. | |||
INDEX OF ABSTRACTS Simulator Ph sical Fidelit Test (2) | |||
FT-001 Simulator Physical Fidelity Test FT-002 Simulator Model Limits Exceeded Test Malfunction Tests (180) | |||
MT-1013 Inadvertent Feedwater Isolation MT-1014 Inadvertent Main Steam Isolation MT-1015 Diesel Generator Sequencer Fails to Complete Block 1 MT-10161 Failure of Rod Blocks to Block (C-1) | |||
MT-10162 Failure of Rod Blocks to Block (C-2, C-3, C-4) | |||
MT-10165 Failure of Rod Block to Block (C-5) | |||
MT-1017 Failure of Permissive Interlock P-14 MT-1031 Safety Injection Failure (Train B, Inadvertent) | |||
MT-1032 Safety Injection Failure (Train A, Fail to Initiate) | |||
MT-1041 Reactor Trip Breakers Fail (Both Inadvertent Open) | |||
MT-1042 Reactor Trip Breakers Fail (B fails to open) | |||
MT-106 False Containment Spray Actuation MT-1071 Turbine Runback Failure (Erroneous Runback) | |||
MT-1072 Turbine Runback Failure (Failure to Runback) | |||
MT-111 Loss of Instrument Air (Turbine Building) | |||
MT-1110 Pressurizer Level Control Band Shift Down MT-111A Pressurizer Steam Space Leak MT-112 Loss of Instrument Air to the Reactor (Reactor Auxiliary Building) | |||
MT-112A Pressurizer Spray Valve Failure MT-113 Loss of Instrument Air to the Containment Building (AIR-1, 1) | |||
MT-1131 Pressurizer Relief Valve Failure (445A With P-11 Interlock) | |||
MT-1132 Pressurizer Relief Valve Failure (444B Without P-11 Interlock) | |||
MT-114 Pressurizer Safety Valve Failure (8010C Open) | |||
MT-1151 Pressurizer Pressure Channel Failure (PT~ High) | |||
MT-1152 Pressurizer Pressure Channel Failure (PTM5 Low) | |||
MT-1162 Pressurizer Pressure Channel Failure (PT-457 Low) | |||
Page 23 of 33 | |||
MT-117'1 Pressurizer Level Channel Failure (LTC59 Low) | |||
MT-118 Pressurizer Backup Heaters Groups A and B Failure MT-12 NSW Pump Trip and Loss of NSW MT-121 Emergency Service Water Pump Trip MT-1210 RCP A, B, C High Vibration MT-1211 RCS Leak Within Capacity of Charging Pumps MT-1211A RCS Fuel Rod Breach MT-1211B Uncoupled Control Rod MT-1212 LOCA Within Capacity of the SI Pumps MT-1212A RCS Leakage into an Accumulator MT-1213 RCS Vessel Flange Leak MT-1213A RCS Leak (LOCA) | |||
MT-1214 RCP Bearing Oil Reservoir Leak MT-1214A LOCA on RHR MT-1215 RCS Thermal Barrier Leak into CCW System MT-1216 RCS Flow Transmitter Failure (FT-436 w) | |||
MT-1221 Steam Generator Tube Leak (S/G B) | |||
MT-1222 Steam Generator Tube Rupture (S/G A) | |||
MT-1231 RCP Trip From 100 Percent Power (RCP-C) | |||
MT-1232 Reactor Coolant Pump Trips (RCP-C) | |||
MT-124 Reactor Coolant Pump Trip (Locked Rotor) | |||
MT-125 RCP Shaft Break Accident (RCP B) | |||
MT-126 RCS Boron Dilution MT-1281 RCS Protection RTD Failure (TE-412B Low) | |||
MT-129 RCS WR Pressure Transmitter Failure (PT-403 High) | |||
MT-131 RHR Pump Trip (Pump A) | |||
MT-131A RHR Pump Trip (Pump A) | |||
MT-1321 RHR HX Flow Control Valve Failure (FCV-603A Closed) | |||
MT-1322 RHR HX Flow Control Valve Failure (FCV-603B Open) | |||
MT-1331 RHR HX Bypass FCV Failure (FK-605A1 Open) | |||
MT-1332 RHR HX Bypass FCV Failure (FK-605B1 Closed) | |||
MT-134 RHR to Letdown Valve Failure (HCV-142.1 Open) | |||
MT-135 RHR Bypass Line Leak (Train A) | |||
MT-136 RHR Sump Valves Fail to Open MT-137 Containment Spray Pump Failure MT-138 Containment Spray Pump Discharge Valve Failure MT-141 Containment Fan Cooler Unit Trip MT-151 Inadvertent Turbine Trip MT-152 Turbine Protection Trip Failure MT-154 Turbine Vibration MT-155 Governor Valve Failure (GV-3 Closed) | |||
Page 24 of 33 | |||
I MT-157 Turbine DEH Computer Failure MT-17 Refueling Water Storage Tank Leak MT-21 Component Cooling Water Pump Trip MT-210 Seal Water Heat Exchanger Tube Leak MT-22 Loss of CCW to RHR Heat Exchanger MT-22A Loss of CCW to RHR Heat Exchanger MT-23 CCW Leak into the Service Water System MT-24 Component Cooling Water Header Supply Valve Failure (Closed) | |||
MT-25 Letdown Heat Exchanger Tube Leak MT-26 Loss of CCW to RCP Thermal Barrier MT-271 Letdown Temperature Controller Failure (TK-144 Low) | |||
MT-272 Letdown Temperature Controller Failure (TK-144 High) | |||
MT-28 Loss of CCW to the Reactor Coolant Pumps MT-31 Circulating Water Pump Trip MT-32 Main Condenser Tube Leak MT-331 Hotwell Level Controller Failure (LC-1900 High) | |||
MT-333 Hotwell Level Controller Failure (LC-1901 Low) | |||
MT-34 Loss of Condenser Vacuum MT-35 Loss of Condenser Vacuum Pump MT-41 Power Cabinet Urgent Failure MT-410 DRPI-Open or Shorted Coil MT-411 Improper Bank Overlap MT-412 Control Bank Rod Step Counter Failure MT-413 Rod Speed Deadband Control Failure MT-42 Logic Cabinet Urgent Failure MT431 Dropped Rod (One Rod) | |||
Stuck Rod MT'T'T-461 Ejected Rod Uncontrolled Automatic Rod Motion MT462 Uncontrolled Manual Rod Motion MT-47 Failure of Auto Rod Blocks to Block (C-11) | |||
MT48 TREF Failure DRPI Loss of Voltage MT'T-51 Letdown Isolation Valve Failure (1CS-11) | |||
MT-5111 VCT Level Transmitter Failure (LT-112 High) | |||
MT-512 RCP Number 1 Seal Failure (RCP B) | |||
MT-513 RCP Number 2 Seal Failure (RCP A) | |||
MT-514 RCP Number 3 Seal Failure (RCP C) | |||
MT-5151 Boric Acid Flow Xmtr. Failure (FT-113 to 20 gpm) | |||
MT-5152 Boric Acid Flow Xmtr. Failure (FT-113 to 0 gpm) | |||
MT-516 Boric Acid Filter Plugged Page 25 of 33 | |||
MT-'518'1 Seal Injection Flow Control Valve Failure (HC-186 Open) | |||
MT-5182 Seal Injection Flow Control Valve Failure (HC-186 Closed) | |||
MT-52 VCT Outlet Isolation Valve Failure (LCV-115E Closed) | |||
MT-5201 Failure of Charging Flow Control Valve MT-5202 Failure of Charging Flow Control Valve (Closed) | |||
MT-523 High Temperature Divert Valve (TCV-143) Failure MT-524 Charging Pump Suction From RWST Failure (115D Open) | |||
MT-525 Charging Pump Mini Flow Valve Failure (1CS-182 Closed) | |||
MT-526 Boric Acid Pump Trip MT-527 Charging Line Containment Isolation Valve Failure MT-5281 Charging Line Leak on Charging Pump Suction MT-5282 Charging Pump Discharge Line Leak Before FT-122 MT-5283 Charging Line Leak Between FT-122 and 1CS-235 MT-5284 Charging Line Leak in Containment Before Regen HX MT-5285 Charging Line Leak Between Regen HX and 1CS-492 MT-53 Letdown Line Leak Inside Containment MT-54 Letdown Line Leak Outside Containment MT-55 Charging Pump Trip MT-56 Reactor Makeup Water Pump Trip MT-571 Letdown Pressure Control Valve Failure (PK-145 Open) | |||
MT-572 Letdown Pressure Control Valve Failure (PK-145 Closed) | |||
MT-58 Loss of Normal Letdown MT-59 VCT Divert Valve Control Failure (HUT) | |||
MT-61 Station Blackout MT-6101 Loss of Unit Auxiliary Transformer A phase MT-6102 Loss of Unit Auxiliary Transformer B phase MT-612 Generator Output Breakers Fail to Trip MT-615 Diesel Generator Governor Failure MT-616 Diesel Generator Breaker Inadvertent Trip MT-623 Loss of 120-VAC Uninterruptible Power (Power Supply SIII) | |||
MT-632 Loss of 1&-VDC Emergency Bus (DP 1B-SB) | |||
MT-64 Loss of 6.9 KV Auxiliary Bus (1B) | |||
MT-645 Loss of 6.9 Aux Bus 1E MT-651 Loss of 6.9-KV Emergency Bus (1A-SA) | |||
MT-661 Loss of a 250-VDC Nonvital Bus (DP-1-250) | |||
MT-662 Loss of a 125-VDC Nonvital Bus (DP 1A) | |||
MT-67 Diesel Generator Failure MT-68 Automatic Voltage Regulator Failure (High) | |||
MT-69 Loss of Start-up Transformer 1A MT-692 Loss of Start-up Transformer 1B MT-710 Condensate Pump Trip (Pump A) | |||
Page 26 of 33 | |||
MT-'711A Motor Driven Auxiliary Feedwater Pump Trip MT-712 Failure of Excess Condensate Dump Valve (Closed) | |||
MT-712A Turbine Driven Auxiliary Feedwater Pump Trip MT-714 Condensate Storage Tank Leak MT-715 Heater Drain Pump Trip (Pump B) | |||
MT-719 Main Feedwater Pump Trip (Pump B) | |||
. MT-72 Condensate Booster Pump Trip (Pump B) | |||
MT-720 Main Feedwater Pump Recirc Valve Failure (Pump 1B) | |||
MT-721 Feedwater Flow Transmitter Failure (FT466 Low) | |||
MT-722 Feedwater Control Valve Position Failure (LCV-488 Open) | |||
MT-723 Feedline Break Inside Containment MT-724 Feedline Break Outside Containment MT-725 Steam Generator Level Chan. Failure (LT-496 Low) | |||
MT-73 Turbine Driven Auxiliary Feedwater Pump Speed Control Oscillates MT-74 Steam Generator Backleakage MT-76 Auxiliary Feedwater Flow Control Valve Failure (Open) | |||
MT-771 Feedwater Bypass Valve Failure (Closed) | |||
MT-772 Feedwater Bypass Valve Failure (Open) | |||
MT-78 Turbine Driven Auxiliary Feedwater Flow Control Valve Failure (Closed) | |||
MT-81 Steamline Break Inside Containment MT-810 Steam Dump Control Failure (Closed) | |||
MT-811 Mechanically Stuck Condenser Dump Valve (PCVA08 Open) | |||
MT-812 Steam Dump Permissive (P-12) Failure MT-814 Steam Failure to TDAFW Pump (1MS-72 Closed) | |||
MT-815 Main Steam Header Break MT-82 Steam Break Outside Containment MT-83 Steam Header Press. Detector Failure (PT-464 High) | |||
MT-84 Steam-Line Flow Transmitter FT-494) | |||
MT-85 Steam Generator Press. Xmtr. Failure (PT-485 High) | |||
MT-86 Steam Generator Relief Valve Failure (Open) | |||
MT-87 MSIV Failure (S/G B Shut) | |||
MT-88 Steam Generator Safety Valve Failure (Open) | |||
MT-89 Atmospheric Steam Dump Valve Failure (PCV408J Open) | |||
MT-91 Source Range Instrument Failure (N31 High) | |||
MT-911 Source Range Instrument Power Fuse Blown MT-912 Intermediate Range Control Power Fuse Blown MT-913 Power Range Control Power Fuse Blown MT-92 Source Range Pulse Height Discriminator Failure MT-93 Failure of Source Range High Voltage to Disconnect MT-94 Source Range Channel High Voltage Failure MT-95 Intermediate Range Channel Failure Page 27 of 33 | |||
I MT-'96 Intermediate Range Channel Gamma Compensation Failure MT-97 Power Range Channel Detector Failure (Low) | |||
MT-98 Power Range Channel Failure (Low) | |||
MT-MSC3 Annunciator System Failure MT-RCS-18 Small Break LOCA MT-RCS-6 Median Select Circuit Failure MT-RPS4 Inadvertent Containment Isolation Phase B MT-CRF16 Control Rod Stuck on Trip (NEW) | |||
MT-CVC29 CSIP Shaft Shear (NEW) | |||
MT-CVC30 CSIP Speed Changer Failure (NEW) | |||
MT-DSG5 Diesel Generator Emergency Trip (NEW) | |||
MT-HVA4 Essential Services Chiller Trip MT-SWS4 Service Water Discharge Valve Fails to Open (NEW) | |||
MT-SWSS B NSW Pump Fails to Auto Start (NEW) | |||
MT-SWS6 SW From Containment Fan Coolers Back Pressure Valve Failure (NEW) | |||
MT-SWS7 NSW Pump Shaft Shear (NEW) | |||
Page 28 of 33 | |||
Normal 0 erator Surveillance Tests (25) | |||
NOST-1004 OST-1004, Power Range Heat Balance NOST-1005 OST-1005, Control Rod and Rod Position Exercise NOST-1007 OST-1007, CVCS/SI System Operability NOST-1008 OST-1008, RHR Pump Operability NOST-1009 OST-1009, Containment Spray Operability NOST-1013 OST-1013, 1A-SA Emergency Diesel Generator Operability NOST-1014 OST-1014, Turbine Valve Test NOST-1018 OST-1018, Main Steam Isolation Valve and Main Feedwater Isolation Valve Operability Test NOST-1021 OST-1021, Daily Surveillance Requirements Modes 1 and 2 NOST-1022 OST-1022, Daily Surveillance Requirements Modes 3 and 4 NOST-1026 OST-1026, Reactor Coolant System Leakage Evaluation NOST-1036 OST-1036, Shutdown Margin Calculation NOST-1039 OST-1039, Calculation of Quadrant Power Tilt Ratio NOST-1046 OST-1046, Main Steam Isolation Valve Operability Test NOST-1054 OST-1054, Permissives P-6 and P-10 Verification NOST-1073 OST-1073, 1B-SB Emergency Diesel Generator Operability NO ST-1075 OST-1075, Turbine Mechanical Overspeed Trip Test NOST-1076 OST-1076, AFW Pump 1BCB Operability Test - Quarterly NOST-1080 OST-1080, Turbine Driven AFW Pump Full Flow Test NOST-1087 OST-1087, Motor Driven AFW Pumps Flow Test NOST-1092 OST-1092, RHR Pump 1B-SB Operability NOST-1126 OST-1126, Reactor Coolant Pump Seals Controlled Leakage Evaluation NOST-1211 OST-1211, AFW Pump 1A-SA Operability Test - Quarterly NOST-1316 OST-1316, CCW System Operability - Quarterly NOST-1411 OST-1411, AFW Pump 1X-SAB Operability Normal 0 erations Tests (9) | |||
NOT-001 GP-001, Plant Fill and Vent NOT-002 GP-002, Plant Heatup NOT-003 Recovery to Rated Power Following Reactor Trip NOT-004 GP-004, Reactor Startup NOT-005 GP-005, Plant Startup NOT-006 GP-006, Plant Shutdown NOT-007 GP-007, Plant Cooldown NOT-008 GP-008, Plant Drain to Mid-Loop NOT-009 GP-009, Refueling with Cavity Fill and Drain page 29 of 33 | |||
Real Time Test (1) | |||
RTT-001 Computer Real Time Test SST-001 100 Percent Power Accuracy Test SET-002 75 Percent Power Accuracy Test SST-003 30 Percent Power Accuracy Test Transient Tests (10) | |||
TT-001 Manual Reactor Trip TT-002 Simultaneous Trip of all Feedwater Pumps TT-003 Simultaneous Closure of All Main Steam Isolation Valves TT-004 Simultaneous Trip of All Reactor Coolant Pumps TI'-005 One Reactor Coolant Pump Trip TT-006 Turbine Trip Below P-10 TT-007 Maximum Rate Power Ramp Tl'-008 Maximum Size RCS Leak Inside Containment With Loss of Off-site Power TT-009 Maximum Size Steam Leak Inside Containment TT-010 Slow RCS Depressurization to Saturation Using PORV's and No SI Page 30 of 33 | |||
APPE<NDIX E Scheduled Malfunction Test to ANSI 3.5 1985 Cross Reference This appendix contains a list (index) of the malfunction test to be performed in the upcoming certification cycle with a cross reference to the specific ANSI 3.5 1985 requirement. Abstracts of these test were included in the previous certification submittals and are not being included in this submittal unless it is one of the tests added in the past four years. | |||
ANSI 3.5 1985 TEST TITLE Test Number Reference 3.1.2(la) Steam Generator Tube Rupture (S/G A) MT-1222 3.1.2(la) Steam Generator Tube Leak (S/G B) MT-1221 3.1.2(lb) RCS Leak (Large Break) MT-1213A 3.1.2(lc) Small Break LOCA RCS-18 3.1.2(lc) RCS Leak Within Capacity of Charging Pumps MT-1211 3.1.2(lc) LOCA Within Capacity of the SI Pumps MT-1212 3.1.2(lc) Pressurizer Steam Space Leak MT-111A 3.1.2(ld) Pressurizer Safety Valve Failure (8010C Open) MT-114 3.1.2(2) Loss of Instrument Air to the Containment Building MT-113 3.1.2(2) Loss of Instrument Air to the Reactor (Reactor Auxiliary MT-112 Building) 3.1.2(2) Loss of Instrument Air (Turbine Building) MT-111 3.1.2(3) Station Blackout MT-61 3.1.2(3) Loss of 120-VAC Uninterruptible Power (Power Supply SIII) MT-623 3.1.2(3) Loss of 6.9-KV Emergency Bus (1A-SA) MT-651 3.1.2(3) Diesel Generator Failure MT-67 3.1.2(3) Diesel Generator Breaker Inadvertent Trip MT-616 3.1.2(4) RCP Trip From 100 Percent Power (RCP-C) MT-1231 3.1.2(4) Reactor Coolant Pump Trips (RCP-C) MT-1232 3.1.2(5) Hotwell Level Controller Failure (LC-1901 Low) MT-333 3.1.2(5) Loss of Condenser Vacuum MT-34 3.1.2(5) Hotwell Level Controller Failure (LC-1900 High) MT-331 3.1.2(6) NSW Pump Trip and Loss of NSW MT-12 3.1.2(6) Normal Service Water Pump Shaft Shear (NE<W) SWS-7 3.1.2(7) RHR Bypass Line Leak (Train A) MT-135 3.1.2(8) Component Cooling Water Pump Trip MT-21 Page 31 of 33 | |||
~ | |||
j' ~ | |||
3.1.2(8) Loss of CCW to RHR Heat Exchanger MT-22A 3.1.2(8) Loss of CCW to the Reactor Coolant Pumps MT-28 3.1.2(8) RCP Number 1 Seal Failure (RCP B) MT-512 3.1.2(9) Condensate Pump Trip (Pump A) MT-710 3.1.2(10) Main Feedwater Pump Trip (Pump B) MT-719 3.1.2(10) Motor Driven Auxiliary Feedwater Pump Trip MT-711A 3.1.2(1 1) N/A to HNP. See exceptions to ANSI 3.5 item 3 on page 5 3.1.2(12) Stuck Rod MT-44 3.1.2(12) Uncoupled Control Rod MT-1211B 3.1.2(12) Dropped Rod (One Rod) MT-431 3.1.2(12) Ejected Rod MT'RF-16 3.1.2(12) Control Rod Stuck on Trip (NEW) 3.1.2(13) Logic Cabinet Urgent Failure 3.1.2(14) RCS Fuel Rod Breach MT'T-1211A 3.1.2(15) Inadvertent Turbine Trip MT-151 3.1.2(16) Generator Output Breakers Fail to Trip MT-612 3.1.2(16) Automatic Voltage Regulator Failure (High) MT-68 3.1.2(17) LOCA on RHR MT-1214A 3.1.2(18) Pressurizer Relief Valve Failure (444B Without P-11 Interlock) MT-1132 3.1.2(18) Letdown Pressure Control Valve Failure (PK-145 Open) MT-571 3.1.2(18) Pressurizer Spray Valve Failure MT-112A 3.1.2(19) Reactor Trip Breakers Fail (Both Inadvertent Open) MT-1041 3.1.2(20) Feedline Break Outside Containment MT-724 3.1.2(20) Steam Generator Relief Valve Failure (Open) MT-86 3.1.2(20) Feedline Break Inside Containment MT-723 3.1.2(20) Steam Break Outside Containment MT-82 3.1.2(20) Steamline Break Inside Containment MT-81 3.1.2(20) Main Steam Header Break MT-815 3.1.2(21) Power Range Channel Detector Failure (Low) MT-97 3.1.2(21) Source Range Instrument Failure (N31 High) MT-91 3.1.2(21) Intermediate Range Control Power Fuse Blown MT-912 3.1.2(22) Annunciator System Failure MT-MSC3 3.1.2(22) Turbine Runback Failure (Failure to Runback) MT-1072 3.1.2(22) Pressurizer Level Control Band Shift Down MT-1110 3.1.2(22) Median Select Circuit Failure RCS-6 3.1.2(22) Inadvertent Containment Isolation Phase A MS'T-51 3.1.2(23) Letdown Isolation Valve Failure (1CS-11) 3.1.2(23) Safety Injection Failure (Train A, Fail to Initiate) MT-1032 3.1.2(23) Turbine Driven Auxiliary Feedwater Pump Trip MT-712A Page 32 of 33 | |||
3.1:2(23) RHR Sump Valves Fail to Open MT-136 3.1.2(23) Auxiliary Feedwater Flow Control Valve Failure (Open) MT-76 3.1.2(23) Diesel Generator Sequencer Fails to Complete Block 1 MT-1015 3.1.2(23) RCS Leakage into an Accumulator MT-1212A 3.1.2(23) Charging/Safety Injection Pump Speed Changer Failure (NEW) CVC-30 3.1.2(24) Reactor Trip Bnreakers Fail (B fails to open) MT-1042 3..1,2(25) N/A to HNP. See Exceptions to ANSI 3.5 item 5 on page 5. | |||
Any power with A NSW Pump in service Test | Abstracts for those new tests identified in the above appendix are attached to this report following this page. | ||
Page 33 of 33 | |||
~ ~ | |||
4 Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWSS or: MT-SWSS Malfunction Number: CO SWS Z21 Year: 3 Title: B NSW Pump Fails to Auto Start on a A Pump Faiure ANSUANS-3.5-1985 Section 3.2.3(6) | |||
Available Options: Test the proper response of the B NSW Pump to a Malfunction of the A NSW Pump simultaneous with a failure of the B NSW Pump Auto Start Relay 2-2181. It is not the intent of the test to address the hydraulic response of the NSW system. Either A or B pump malfunctions are available. | |||
Tested Options: This test address the B NSW Pump. | |||
Initial Conditions: Any power with A NSW Pump in service Test | |||
== Description:== | == Description:== | ||
This test verifies that with a relay failure inserted on the auto start relay of B NSW Pump and a malfunction occurring on the A NSW Pump via the simulated malfunction SWS1A that the B NSW pump will not automatically start. The result should prompt the operator to manually start the B NSW Pump and it will start from a switch input. The test is complete when the B NSW pump has been started and the discharge valve has been opened. | |||
Baseline Data: (1) Panel of experts. | |||
Current Status: Date Achieved Status: 2/18/97 Year 1: Results 1: Year 2: Results 2: | |||
Year 3: 2/18/97 Results 3: S Year 4: Results 4: | |||
Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficiencies: | |||
Abslract Page | |||
C 4 | |||
A I | |||
1 | |||
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWS6 or: MT-SWS6 Malfunction Number: SWS5a Year: 3 Title: SW From CNM Fan Cooler Back Pressure Valve fail open ANSVANS-3.5-1985 Section 3.2.3(6) | |||
Available Options: This malfunction allows the operator to fail the SWS back pressure control valve for the Containment Fan Coolers to any selected valve. Options are available for the A train as well as the B train valve. | |||
Mode 1, approximately 100%power.Test | Tested Options: This test address the A train valve SW-116. | ||
Initial Conditions: Mode 1, approximately 100% power. | |||
Test | |||
== Description:== | == Description:== | ||
This test verifies that with the malfunction inserted at 100% that SW 116 does not shut in response to a ESW Booster Pump start when SI is activated. The test will insert the malfunction, verify that the valve is open, insert a large LOCA to cause SI activation and thc verify the valve position based on MCB indications and SW pressures. | |||
Baseline Data: (1) Panel of experts. | |||
Current Status: Date Achieved Status: 10/9/97 Year 1: Results 1: Year 2: Results 2: | |||
Year 3: 10/9/97 Results 3: S Year 4; Results 4: | |||
Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficiencies: | |||
hbslraer Page | |||
~ ~ | |||
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CRF16 or: MT-CRF16 Malfunction Number: CRF-16 Year: 4 Title: Control Rod Stuck on Trip ANSUANS-3.5-1985 Section 2.1.2(12) | |||
Available Options: The malfunction is one of 8 (CRF16a-h) that can select any of the 52 control rods. | |||
Tested Options: CRF16A for Rod G-3 at 24 steps. CRF16C for Rod E-11 at 48 steps. CRF16E for Rod D-4 at 72 steps. CRF16h for Rod F-6 at a variable position above the current value. | |||
~~Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CRF16 or: MT-CRF16 Malfunction Number: CRF-16 Title: Control Rod Stuck on Trip | Initial Conditions: Mode 1, approximately 50% power. | ||
Mode 1, approximately 50%power.Test | Test | ||
== Description:== | == Description:== | ||
Eight identical malfunctions are available that will affect any of the Control or Shutdown Rods. This test uses four of these malfunctions simultaneously to verify the ability to stick multiple rods on a Reactor Trip. In at least one case the selected stuck position is above the current rod position of the rod. In that case thc rod should stick at the actual rod height at the time of the trip. | |||
Baseline Data: (1) Panel of experts Current Status: Date Achicvcd Status: 9/23/98 Year I: Results 1: Year 2: Results 2:. | |||
Year 3: Results 3: Year 4: 9/23/98 Results 4: S Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficiencies: | |||
Absrrael Page 261 | |||
~ | |||
4 | |||
~ | |||
r t+E If | |||
Harris | |||
) | |||
Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CVC29 or: MT-CVC29 Malfunction Number: CVC-29 Year: 4 Title: Charging Pump Shaft Shear ANSVANS-3.5-1985 Section 3.1.2 (18) | |||
Any at power condition with CSIP"A" in service Test | Available Options: Three malfunctions are available as CVC29A-C. CVC29C will impact the "C" pump reguardless of which power bus it is attached Tested Options: Charging Pump A shaft shear. | ||
Initial Conditions: Any at power condition with CSIP "A" in service Test | |||
== Description:== | == Description:== | ||
The shaft on the "A" CSIP shears between the speed changer and the pump. The charging header will depressurize to less than RCS pressure causing a loss of charging flow and seal injection. Ifcharging flow is not restored letdown system will heat up and activate alarms accordingly. The CSIP amps should decrease to a value representing the motor with only the speed changer load. | |||
Baseline Data: (1) Panel of experts. (2) OP-107, Chemical and Volume Control System. (3) Hot functional test CVCS Current Status: Date Achieved Status: 10/19/98 Year 1: Results 1: Year 2: Results 2: | |||
Year 3: Results 3: Year 4: 10/19/98 Results 4: S Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficiencies: | |||
Abstract Page 262 | |||
4 A'~ | |||
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CVC30 or: MT-CVC30 Malfunction Number: CVC-30 Year: 4 Title: Charging/Safety Injection Pump Speed Changer Failure ANSVANS-3.5-1985 Section 3.1.2 (18) | |||
Available Options: Three malfunctions are available as CVC29A-C. CVC29C will impact the "C" pump reguardless of which power bus it is attached Tested Options: Charging Pump B speed changer failure Initial Conditions: Any at power condition with CSIP "B" in service Test | |||
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CVC30 or: MT-CVC30 Malfunction Number: CVC-30 Title: Charging/Safety Injection Pump Speed Changer Failure ANSVANS-3.5-1985 Section 3.1.2 (18) | |||
Any at power condition with CSIP"B" in service Test | |||
== Description:== | == Description:== | ||
The shaft on the "B" CSIP shears in the speed changer causing a reduction of about 10% in the speed of the pump. The charging header will depressurize to less than RCS pressure causing a loss of charging flow and seal injection. Ifcharging flow is not restored the letdown system will heat up and activate alarms accordingly. The CSIP amps should increase about 15 amps greater than thc previous value representing the motor plus a binding in the speed changer. This malfunction is based on event that occurred at the HNP. | |||
Baseline Data: Plant data from ACR 93-0111 Current Status: Date Achieved Status: 10/19/98 Year 1: Results I: Year 2: Results 2: | |||
Year 3: Results 3: Year 4: 10/19/98 Results 4: S Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Dcficicncics: | |||
Abstract Page 263 | |||
I I | |||
m | |||
Harris a ~ I Simulator Performance Test Abstracts | |||
Tested Options: Diesel Generator A Emergency Failure Initial Conditions: | ~ | ||
Mode l, approximately 100%power Test | ~ | ||
/0-Mar-99 Test Number: MT-DSG5 or: MT-DSG5 Malfunction Number: DSG-5 Year: 2 Title: Diesel Generator Emergency Trip ANSVANS-3.5-1985 Section 3.1.2(23) | |||
Available Options: The malfunction is available for either Emergency Diesel Generator. | |||
Tested Options: Diesel Generator A Emergency Failure Initial Conditions: Mode l, approximately 100% power Test | |||
== Description:== | == Description:== | ||
This test inserts a diesel generator emergency trip following a normal start. After the trip is verified, an emergency start signal is initiated. Indications and alarms consistent with starting air being depleted are verified as well as the removal of the start signal by the low air pressure condition. To complete the test the malfunction is cleared, the trip is reset, and diesel generator is started. | |||
Baseline Data: (I) Panel of Experts Current Status: S Date Achieved Status: 9/25/96 Year 1: Results 1: Year 2: 9/25/96, Results 2: S Year 3: Results 3: Year 4: Results 4: | |||
Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficiencies: | |||
Abslract Page 26'4 | |||
~ | |||
g$ | |||
/) | |||
P'y | |||
Mode 3 with A NSW Pump in service.Test | Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWS4 or: MT-SWS4 Malfunction Number: SWS-4 Year: 2 Title: Service Water Discharge Valve Fails to Open ANSVANS-3.5-1985 Section 3.2.3(6) | ||
Available Options: This procedure tests the proper response to a failure of a Normal Service Water (NSW) pump discharge valve to stroke to 10% within 10 seconds. This results in a trip of the NSW pump. The malfunction is available for either A or B pump. | |||
Tested Options: This test addresses the A NSW pump. | |||
Initial Conditions: Mode 3 with A NSW Pump in service. | |||
Test | |||
== Description:== | == Description:== | ||
This test verifies a failure of the NSW pump discharge valve to stroke to 10% in less than 10 seconds. This results in a trip of the NSW pump. | |||
Basclinc Data: (I) Panel of experts. | |||
Current Status: Date Achieved Status: 10/17/96 Year 1: Results 1: Year 2: 10/17/96 Results 2: S Year 3: Results 3: Year 4: Results 4: | |||
Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficiencies: | |||
Abslract Page 268 | |||
lg C | |||
P~ '-r~ | |||
J'a p'4 4 | |||
HyrrIIs Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWS7 or: MT-SWS7 Malfunction Number: SWS-7 Year: 4 Title: Nortnal Service Water Pump Shaft Shear ANSVANS-3.5-1985 Section Available Options: This malfunction allows the simulator operator to break the Normal Service Water (NSW) | |||
Pump shaft at the pump to motor coupling. Options are available for either A or B NSW pumps. | |||
Any power with A NSW pump in service.Test | Tested Options: This test address the A NSW pump. | ||
Initial Conditions: Any power with A NSW pump in service. | |||
Test | |||
== Description:== | == Description:== | ||
The simulator is initialized to an at power condition with "A" NSW pump in service. The malfunction to cause the shaft shear is inserted and plant response noted. The ESW headers will depressurize causing an auto start of both ESW pumps and alignment of the ESW to return water to the Aux Reservoir will occur. The NSW system will also depressurize since an auto start of the "B" NSW pump will not occur. | |||
Baseline Data: (l) Panel of experts. | |||
Current Status: Date Achieved Status: 8/20/98 Year 1: Results 1: Year 2: Results 2: | |||
Year 3: Results 3: Year 4: 8/20/98 Results 4: S Open SSRs/DRs: | |||
Comments on Current Status and Training Impact of Any Deficicncics: | |||
Abslract Page 269 | |||
0 ' | |||
'Cg}} |
Revision as of 05:38, 22 October 2019
ML18016A866 | |
Person / Time | |
---|---|
Site: | Harris ![]() |
Issue date: | 03/31/1999 |
From: | CAROLINA POWER & LIGHT CO. |
To: | |
Shared Package | |
ML18016A865 | List: |
References | |
NUDOCS 9903260290 | |
Download: ML18016A866 (55) | |
Text
HARRIS NUCLEAR POWER PLANT OPERATOR TRAINING SIMJLATOR SIC( JLATOR CERTIFICATION QUADRENNIALREPORT MARCH 1999 CAROLINAPOWER 4 LIGHT COMPANY NEW HILL, NORTH CAROLINA eeosiioieo iiosi9 05000400' PDR ADGCK VDa L~
Page 1 of 33
~ ~
SHNPP CERTIFICATION REPORT PACKAGE TABLE OF CONTENTS FORM 474 INTRODUCTION General Information Simulator Configuration Control Exceptions to ANSUANS-3.5-1985 Standard 1.0 SIMULATOR INFORMATION 1.1 Simulator General 1.1.1 Owner 1.1.2 Reference Plant/Unit 1.1.3 Simulator Supplier 1.1.4 Ready for Training Date 1.1.5 Type of Report 1.2 Simulator Control Room 1.2.1 Physical Arrangement 1.2.2 Panels and Equipment 1.2.3 Systems 1.2.4 Environment 1.3 Simulator Instructor Interface 1.3.1 General Instructor System 1.3.2 Initial Conditions 1.3.3 Malfunction Selection 1.3.4 Overrides 1.3.5 Local Operator Actions 1.3.6 Parameter and Equipment Monitoring 1.3.7 Simulator Special Features 1.4 Operating Procedures for Reference Plant 1.5 Changes Since Last Report 1.5.1 Plant Modifications 1.5.2 Simulator Upgrades Page 2 of 33
'I ~
~ ~
SIMULATOR CERTIFICATION REPORT PACKAGE TABLE OF CONTENTS 2.0 SIMULATORDESIGN DATABASE 3.0 SIMULATOR DISCREPANCY AND UPGRADE PROGRAM 3.1 Simulator Service Request Program 3.2 Engineering Service Request Implementation 3.3 Simulator Configuration Management System 4.0 SIMULATORTESTS 4.1 Certification Test Schedule 4.1.1 Annual Operability Tests 4.1.2 Malfunction Tests 4.2 Simulator Test Procedure to ANSI/ANS-3.5-1985 Cross-Reference 4.3 Summary of Certification Deficiencies 4.4 Certification Test Abstracts APPENDIX A: SCHEDULE OF ANNUALOPERABILITYTESTS APPENDIX B: SCHEDULE OF MALFUNCTIONTESTS APPENDIX C:
SUMMARY
OF CERTIFICATION DEFICIENCIES APPENDIX D: SIMULATOR CERTIFICATION TEST ABSTRACTS APPENDIX E: SCHEDULED MALFUNCTIONTEST TO ANSI 3.5 1985 CROSS REFERENCE Page 3 of 33
NRC FORM 474 U.S. NUCLEAR REGULATORY COMMISSION APPROVED BY OMBt NO. 31500138 EXPIR ESt 08is li2001 (8.1998) Estimated burdon por rosponso to comply with thiS mandatory information collection roqvest: 120 hour* This information ls used to certify a simviatkxt facility. Forward comments regarding burdon estimate to tho Records Management Branch (TA F33), U.S.
Nuclear Regulatory CommMiion. Washingtcn, DC 205554001 ~ and to tho Paperwork SIMULATION FACILITYCERTIFICATION Reduction Project (31504138), Office of Managomont and Budgot. Washkigton, DC 205CL lf an Accmai'on coaoctke does not rgsptay a currently veld OMB ccntrol number, tho NRC mayynot conduct or sponsor. and a porson ts not roqvirod to respond to, the Information colloction.
INBTRUOTIDNs: This form Is to bo Ekxf tor Initial ceniyication. recortificadon gl required), and for any chango to a simulation fadlky performance testing plan made aker krklat submktal of such a lan. Provide the foo krformation and chock the a ate box to Indicate reason tor submittal.
FACIUTY DOCKET NUMBER Shearon Harris Nuclear Power Plant so 400 UCENSEE DATE Carolina Power and Light Company 3/1 5/99 This is to certify thaL
- 1. lho above named facility liconsoo Is using a simulation facility conatstkig sotely of a plantuoforoncod sknvtator that moots tho roqukomonts of 10 CFA 55.45.
- 2. Documentation Is ava8abio tor NRO review in accordanco with 10 cFA 55.45(b).
- 3. This sknutatkxt facility moots tho guidance contained in ANSIJANS 3 5.1985 or ANSI/ANS 3 5.1993. as ondorsod by NRC Regulatory Guide 1.149.
lt there aro any EXCEPTIONS to Iho certification ot this item CHECK HERE [ X ] and desc6be tully on additional pages as necessary.
NAME (or other krentryrcatbn) AND LOCATION OF SIMULATIONFACIUlY.
Harris Simulator - Harris Energy and Environmental Center 3932 New Hill - Holleman Road New Hill, North Carolina 27562-0327 SIMULATION FACIUlYPERFORMANCE TEST ABSTRACTS ATTACHED. (For performance tests conducted h tire pen'od orxrng wirrr tire date of firJs cenifcatbra)
DESCRIPTION OF PERFORMANCE TESTING COMPLETED. (Attach addkbnaI pages as necessary and kfentlfythe lorn descrr)rtbn bang conrnued)
Abstracts for tests added since the 1995 Certification Quadrennial Report are attached. See Section 4.0, "Simulator Tests," and Appendix D, "Simulator Certification Test Abstracts."
slMULATIQNFAGIUTY pERFDRMANc6 TEsllNG scHEDULE ATTADHED. (For tire conduct olapproxrmereiy25 percent orperrormanco tests per year ior too lour year perbd commoncng wkh fire dare of trris ceciTeatJon.)
DEscRI pTIDN oF pERFoRMANGE TEsTING To BE coNDUOTED. (Attach addabnal pages as necessary and kbnliryfire flem descn'prbn behg contnued)
See Section 4.0, "Simulator Tests"; Appendix A, "Schedule of Annual Operability Tests"; and Appendix B, "Schedule of Malfunction Tests."
pERFQRMANGE TEsTING pLAN cHANGE (For any modilcarbn to a performanr>> testhg pron suhmlted on a previous cert yicatbra)
DESCRIPTION OF PERFORMANCE TESTING PLAN CHANGE (Artarh addkknar pages as necessly and krentify the item descrptbn behg conthuaf)
A complete, revised test plan is attached as Appendix A, "Schedule for Annual Operability Tests";
and Appendix B, "Schedule of Malfunction Tests". See Section 4.1, "Certification Test Schedule" for an explanation of the changes.
RECERTIFICATION (Descnbe corrective acr Jons taken. anach resorts ol compiefed periormanco testhg h acc>>nfanco wrrrr 10 CFR 5545(b)(5)(v).
(Attach addsbnaf pages as necossary and ident yy the kern descrrprbn behg conthued)
Any false statement or omission In this document, indvdng attachments, may bo subject to civil and criminal sanctions. I cortify undor penalty of porjury that the tnformadon In this document and attachmonts Is truo and corrocL SIGNATURE UTHORIZED A P SENTATIVE DATF.
accot Vice President - Harris Nuclear Plant with 10 CFA 55.5. Ccmmunlcations, this torm shall be submitted lo the NRC as follows:
3 i'q YMAILADDRESSED TO: DIRECTOR, OFFICE OF NUCLEAR REACTOR REGULATION BY DEUVEAYIN PERSON ONE WHITE FUNT NORTH U.S. NUCLEAR REGULATORY COMMISSION TO THE NRC OFFICE AT: 11555 ROCKVILLEPIKE WASHINGTON DC 205554001 ROCKVII.LE, MO NRC FORM 474 (8 1998) PAINTED ON RECYCLED PAPER
INTRODUCTION General Information The Shearon Harris Nuclear Power Plant Simulator Certification Quadrennial Report is provided to demonstrate compliance with the requirements of 10CFR55.45(b) including compliance with ANSI/ANS-3.5-1985 as implemented by NRC Regulatory Guide 1.149 Rev 1. The subject simulation facility consists solely of a plant reference full-scope simulator, which is the primary vehicle for providing positive, practical license training and examination. An upgrade to the simulation computer system was completed approximately two months before this submittal to make the system Y2K compliant. The documentation contained herein is intended to constitute sufficient basis for retention of the certification of the Harris Simulator.
Simulator Confi uration Control A Simulator Review Group (SRG) is tasked with oversight of changes, potential enhancements, identified discrepancies, and proposed upgrades for implementation or resolution on the Harris Simulator.
The SRG is comprised of the Manager of Operations, Supervisor of License Operator Training, Lead Instructor for Operator Initial Training (OIT) and Licensed Operator Continuing Training (LOCT), and a Program Lead from Simulator Support (functioning as facilitator) or their designees. Other training and plant operations personnel may also participate in SRG meetings as a function of the topics to be addressed.
Plant modifications are reviewed by a member of the Operator Training program. Those with clear impact to the scope of simulation require no further review and are implemented. Those changes with questionable impact are presented to the SRG for a training value assessment. This SRG review ensures that differences between the plant and the simulator do not detract from training. The SRG also reviews outstanding deficiencies for impact on training to ensure high priority items are properly scheduled for resolution. The SRG provides guidance for scheduling discrepancy resolutions and modification implementations.
Exce tions to ANSI/ANS-3.5-1985 Standard Exceptions listed below, except for Exceptions ¹3 and ¹7, were identified at the time of the initial certification of the Harris Simulator's compliance with 10CFR55.45(b) stipulations. Exceptions ¹3 and ¹7 were identified in the 1995 quadrennial report. At those times the SRG reviewed the list of exceptions to ensure that the exception did not detrimentally impact the license operator training program and did not prevent 10CFR55 compliant simulator examinations (operating tests) from being conducted. The exceptions identified in this section are listed by ANSI-3.5 reference and subject. The justification for Page 4 of 33
each exception is included.
- 1. ANS Section 3.1.1(7) Operations at Less than Full Reactor Coolant System (RCS) Flow This section is not applicable. Power operations with less than three operating reactor coolant pumps is prohibited by Technical Specifications. However, the simulator is capable of such operations.
- 2. ANS Section 3.1.1(9) Core Performance Testing Rod worth and reactivity coefficient measurement procedures were not performed as a part of the certification test program. These tests are performed by Reactor Engineering, not Operations.
Tests which were conducted applicable to this section were Estimated Critical Conditions, Shutdown Margin, and Heat Balance.
- 3. ANS Section 3.1.2(11) Protective System Channel Failures Protective system channel failures have been replaced by component overrides consisting of process instrumentation transmitter, relay, and bistable failures. This enhancement provides more credible failures for the student to diagnose or respond to. The instructor has more explicit control over these devices than had been available through the deleted malfunctions.
- 4. ANS Section 3.1.2(12) Control Rod Failures Drifting rods are not simulated as this type of failure is not relevant to the rod mechanisms used at the Harris Nuclear Plant.
- 5. ANS Section 3.1.2(25) Reactor Pressure Control System Failure including Turbine Bypass Failure (BWR)
This item is specifically related to Boiling Water Reactors.
- 6. ANS Section 3.2.1 Degree of Panel Simulation The Seismic Monitoring, Condensate Booster Pump, and Digital Metal Impact Monitoring Panels were not included in the simulation based on an assessment of the training value of having these panels. Training in this area can be sufficiently accomplished utilizing the actual panels in the Harris Plant control room.
- 7. ANS Section 3.2.3 Control Room Environment Page 5 of 33
a'. (Communications Systems) A telephone page system used at the plant to page outside operators was evaluated by the SRG and determined to be unnecessary in the simulation.
A normal telephone system that emulates the real control room exist for normal operator training and is replaced by a similar system of different colored phones when the simulator is used for Emergency Preparedness drills. A radio simulation is available as well as sound-powered phones. The SRG deemed the provided communications systems to be appropriate.
(Ceiling and Lighting) The current ceiling is approximately twenty feet above the simulator panels rather than three feet as in the plant to facilitate visitor viewing of the simulator from above. The lighting provides failure capability and emergency lighting to simulate electrical bus failures. The lighting configuration was altered due to ceiling height differences to provide light intensity level which approximates lighting levels in the plant control room.
- c. (Noise Levels) Background noise levels in the simulator room is approximately that of the plant control room. A replacement of the simulator room HVAC units occurred since the 1995 Certification Report that established this match in background sound.
- 8. ANS Section 4.1(3) Steady State Accuracy Tests (Critical Parameters)
ANS Section 4.1(4) Steady State Accuracy Tests (Non-Critical Parameters)
The criteria used for comparison between the simulator and plant parameters was 2 percent (10 percent for non-critical parameters) of the associated instrument loop range. In addition, the parameter variation must not detract from training. The standard states to use 2 percent (10 percent for noncritical parameters) of the reference plant parameter. Using the percentage of instrument loop range is more limiting and more realistically represents the difference which can be noted by the operators. This method was reviewed and approved by the SRG at the time of the original certification submittal.
- 9. ANS Section Appendix B.1 BWR Simulator Operability Test This item is specifically related to Boiling Water Reactors.
- 10. ANS Section Appendix B.2.1(2) Steady State Performance Steam generator temperature was not measured as this parameter is only applicable to once-through type steam generators.
Page 6 of 33
1.0 SIMULATOR INFORMATION 1.1 Simulator General
1.1.1 Owner
Carolina Power & Light Company 1.1.2 Reference Plant/Unit: Shearon Harris Nuclear Power Plant, Unit ¹I, Westinghouse 3-Loop PWR 1.1.3 Simulator Supplier: Westinghouse Electric Corporation with major upgrades by S3 Technologies (currently GSE Systems) 1.1.4 Ready-for-Training Date: Initial December 20, 1985 Upgrade December 27, 1994 Year 2000 Upgrade January 11, 1999 1.1.5 Type of Report: Quadrennial (4-Year) Report 1.2 Simulator Control Room 1.2.1 Physical Arrangement The simulator control room is approximately 80 percent as large as the Harris Plant control room. The simulated control room panels are the same size and color as found in the Harris Plant control room. Some of the panels have been moved or angled slightly to accommodate space restrictions and the protrusion of the instructor station area into the simulator control room. The simulated panels are in the same relative location as in the Harris Plant control room and provide the same visual perspective as in the plant. The raised platform in the middle of the "at the controls" area is approximately 80 percent the size of the platform in the plant due to room size restrictions. There are other minor differences with carpet color, location/style of handrails, type of furniture, and shape/size of status boards. The differences have been reviewed and accepted by the Simulator Review Group.
1.2.2 Panels and Equipment Control room panels are included in the simulation except the Condensate Booster Pump Panel, Seismic Monitoring Panel, and the Digital Metal Impact Monitoring Panel. The Reactivity Computer, which was only used by the reactor engineers at the time of refueling, has also been omitted. Connections for the portable device that they actually use during physics testing are available. These panels and equipment were omitted based on training value assessment.
Page 7 of 33
~ ~
Classroom and on-the-job training are the means to provide training on these systems.
With the exception of the Emergency Response Facility Information System (ERFIS) peripherals, no panels outside the control room are included in the simulation facility.
Communications equipment capabilities essential to operator training and examination are provided in the simulation facility. Telephone and radio communications terminate in the instructor station rather than various locations in the plant. The instructor plays the role of appropriate plant personnel, interacts with the operating crew, and performs the local operator actions requested.
Dialed or automatic ring-down telephone calls made by the operating crew give a lighted indication in the instructor station as to who was the intended recipient of the call.
1.2.3 Systems
,Operative plant systems assessable from the control room are simulated except for Seismic Monitoring, Digital Metal Impact Monitoring, and Waste Processing.
These systems are omitted based on training value assessment.
1.2.4 Environment Some differences exist in the ceiling, and lighting between the simulator and the Harris Plant control rooms (see Exception ¹7). The simulator control room is designed to include a viewing platform for visitors to the Harris Energy and Environmental Center and an instructor station viewing area. This results in a difference between the simulator and main control room ceiling and lighting 1.3 Simulator Instructor Interface 1.3.1 General Instructor System The Harris Simulator has an instructor booth (or station) that is separated from the simulator control room and out of sight (one way mirrored glass) from the operator's view. The instructor is able to observe the actions of the operators in the simulator control room from the booth. A multiple camera audio/video system is provided in the simulator facility to allow better analysis of operator activity. The audio/video system has been reviewed and accepted by the SRG as a no-training impact difference.
Page 8 of 33
The instructor has the capability of operating the simulator from the instructor's booth or from a terminal in the simulated control room. Hand held remote operating controls are also available for inserting pre-planned simulation functions.
1.3.2 Initial Conditions (IC)
The simulation has storage for up to 200 Initial Condition sets. A controlled set of ICs are stabilized and re-snapped after each major simulator modification/upgrade period but prior to training restart. These ICs contain a minimum of 3 power levels at 3 times in core life (BOL, MOL, and EOL), hot standby, and other primary training starting points selected to satisfy training objectives. Training Administrative Procedures provides a method of controlling simulator initial conditions.
1.3.3 Malfunction Selection The simulation contains capability to insert any number of discrete malfunctions individually or in combination. The selection of malfunctions may be accomplished through command line entry, menu selection or available simulation dynamic PAIDs.
Malfunction severity, time of activation, and time to reach selected severity may be entered through the instructor system and modified as training objectives dictate. Any number of malfunctions may be active at the same time.
Malfunctions may also be initiated based on specific plant conditions.
Deactivation and time delayed deactivation of malfunctions are also facilitated.
The current status of selected malfunctions is readily available to the instructor.
1.3.4 Simulator Overrides 1.3.4.1 Panel Overrides The instructor has the ability to override any simulated device on the control room panels. For example, a meter may be driven to any value, a light may be turned off or on, or a switch may be failed closed. The override may be inserted with a time delay, and analog values may be ramped in over a specified time band.
Page 9 of 33
~ ~ k 1.3.4.2 Transmitter Overrides Most transmitters that have meters on the MCB or others may be overridden or failed to any value in it's range so that corresponding bistable trips and automatic actions will occur. The bistables may also be overridden directly. As with malfunctions, the override may be ramped in over a specified time period. This capability was expanded since the original certification submittal resulting in several of the previously certified malfunctions being no longer necessary.
1.3.4.3 Relay Overrides Selected relays may be overridden or failed to a specified state. This capability was added since simulator certification and eliminated the need for related system malfunctions, some of which had been certified as a part of the original submittal.
1.3.4.4 Selection of Overrides The selection of overrides may be accomplished through command line entry, through a menu of available overrides or from dynamic system P&IDs.
1.3.5 Local Operator Actions (LOAs)
Local operator actions needed to provide training are available through the same selection methods as malfunctions and overrides. Plant procedures are reviewed to identify needed changes to these LOAs. Additional LOAs identified by training within the scope of simulation are added as needed.
1.3.6 Parameter and Equipment Monitoring The graphical capabilities of the instructor system facilitate visual monitoring of the simulation through dynamic P&IDs and panel mimic displays. Plot capabilities for up to 400 parameters simultaneously is available through the instructor system. The standard parameter versus time and X-Y plots are available along with the capability to trend against previously recorded trends, as is necessary to compare a previous test of simulator performance against the current simulator performance.
Page 10 of 33
"
~
1.3.7 Simulator Special Features Industry standard capabilities are available in the areas of switch check status/override, run, freeze, backtrack, replay, snapshot, fast time for certain parameters, slow time, Computer Aided Exercises, and simulation limit exceeded warnings.
Backtrack capabilities allow for four hours of storage at 2 minute intervals. The time between snaps of backtracks can be changed to lengthen or shorten this time. The capability for "nested" batch files allow multiple computer aided exercises to run concurrently, which facilitates simulation of a test (such as a maintenance surveillance test) being run on a system in the plant while other normal plant operations continue without required instructor interaction.
In compliance with ANSI/ANS-3.5 section 4.3, the simulator operating limits exceeded warning to the instructor exist and includes the following:
- Containinent Temperature > 400 degrees
- Containment Pressure > 60 psia
- RCS Pressure > 2700 psia
- Thermocouple Temperature > 2500 degrees
- Steam Generator Pressure > 1400 psia
- Steam Generator Steam Flow > 12.6 MPPH
-Core Power > 120%
- Condenser Pressure >.20 psia 1.4 Operating Procedures for the Reference Plant The Simulator Control Room utilizes a selected set of controlled procedures identical to those used in the Harris Plant control room.
1.5 Changes Since Last Report 1.5.1 Plant Modifications Numerous modifications to the plant have occurred since the last submittal which impact the simulator. The scope of the modifications was significantly less than in the previous certification cycle. Plant modifications continue to be reviewed for simulator and training impact. The more significant modifications are listed below:
Page 11 of 33
- Reactor core fuel cycles 7, 8 and 9
- ERFIS display system replacement (RTIN) 1.5.2 Simulator Upgrades One operating system upgrade has occurred since the last submittal. That upgrade was completed and the system declared "Ready For Training" on 1/11/99. This operating system upgrade to SGI IRIX 6.5 made the simulator computers Y2K compliant. The operating system upgrade was followed by an extensive Performance Test performed in conjunction with the Annual Operability Test.
The peripheral computer systems such as ERFIS and the Radiation Monitoring System (RMS) are being addressed by the plant's Information Technology (IT) group's Y2K compliance plan.
With the 1994 GSE Systems upgrade graphic based code generator modeling tools were purchased. Those tools have been used to build improved themo-hydraulic models of the following systems:
~ Auxiliary Feed-water (AFW)
~ Pressurizer Spray
~ Charging and Safety Injection System (SIS)
~ Letdown Each of these system upgrades was followed by a specific series of performance test prior to being turned over to training.
1.5.2.1 Other Upgrades An ongoing effort to replace the generic controllers with system specific controllers continues. This effort allows for the use of plant specific settings since the mathematics of the simulated controller matches that of the plant.
Page 12 of 33
2.0 SIMULATOR DESIGN DATABASE The original simulator design data base consists of plant reference drawings (logics, CWDs, PEcIDs), FSAR, Plant Operating Manuals (POMs) including system descriptions, and system test results. A complete set of these reference documents is available for use in simulator modification, troubleshooting, and updating. The design data base was pre-start-up data.
Updated Harris Plant design data subsequently obtained is being used to perform simulator modifications. This design data is maintained as part of the Simulator Update Design Data.
Plant modification/change data have continued to be collected and analyzed for simulator applicability through formally controlled distribution of Engineering Service Requests (ESR's),
documentation updates, and plant procedure changes.
Page 13 of 33
~ ~
3.0 SIMULATOR DISCREPANCY AND UPGRADE PROGRAMS 3.1 Simulator Service Request Program Discrepancies noted in the simulator during testing or training sessions are documented by a Simulator Service Request (SSR). The SSR is used by the simulator staff to evaluate the problem and to identify corrective actions. Documentation used to research the problems is attached to the SSR for inclusion as part of the Simulator Update Design Data Base.
3.2 Engineering Service Request Implementation Engineering Service Requests (ESRs) which are approved for work and which have the potential to impact the simulator, are reviewed by the staff concurrent with the plant review for applicability to the simulator. ESR's which are applicable to the scope of simulation are used to generate a Simulator Service Request.
Plant modification SSRs are scheduled to be completed in the simulator within twelve months of their operability in the plant. If requested by the plant operations staff, the modification may be performed in the simulator prior to its completion in the plant in order that the operators may be trained prior to plant modification completion. This is particularly true for many modifications performed during a scheduled plant outage so as to be available for training operators prior to plant start-up. The package is maintained as part of the simulator Update Design Data Base.
3.3 Simulator Configuration Management System The simulator Configuration Management System (CMS) is a PC-based management and design control system which is used to track the simulator's consistency with Harris Plant, performance or certification testing, modifications, and maintenance. This system is used for recording and tracking plant changes and Simulator Service Requests. Based on the relative importance of the modification or severity of the problem, a four-level schedule system is applied to the SSR or SMR. This schedule is used to determine the order in which items are worked. When SSRs are completed, their status is updated in the CMS computer. The CMS computer is used to provide necessary reports as to the status of outstanding plant modifications and service requests.
Page 14 of 33
4.0 SIMULATORTESTS The simulator certification testing is carried out in accordance with the Simulator Certification test schedule. The testing is typically accomplished by SRO licensed or certified individuals using test procedures developed by currently or previously licensed or certified personnel, engineers or others as appropriate. The tests were based on Harris Plant data, similar plant performance data, best estimate analysis, or a panel of experts. The selection of simulator performance test topics was determined based on ANSVANS-3.5-1985 requirements and a comprehensive review of the licensed operator training program. Listed in Appendix C are those certification test deficiencies identified during testing that remain unresolved at the time of this report submittal.
4.1 Certification Test Schedule The test programs in place at Harris Nuclear Plant (HNP) for the past two certification cycles have exceeded the requirements of ANSI 3.5 1985 and Regulatory Guide 1.149 (1987). Because of improvements in the simulator model fidelity and simulator reliability this additional testing is no longer considered necessary. Accordingly, the annual test program was reduced in scope but continues to meet the requirements of the applicable standards and guides.
4.1.1 Annual Operability Tests With this submittal, the requirements of ANSI 3.5 1985 were reviewed and the total number of annual operability test was reduced to those test specified in ANSI 3.5 1985 Appendix B. The annual operability tests program now includes the simulator Real Time Test, the Steady State Stability and Accuracy Tests, and the Transient Tests. These tests are listed in Appendix A.
4.1.2 Malfunction Tests Malfunctions and component overrides available on the simulator and incorporated in the operator training program have been formally tested via an individual performance test, typically at the time of inclusion. In addition, scenario validation performed at the time that a scenario is added verifies that the malfunctions and component failures function as expected. With this submittal, the requirements of ANSI 3.5 1985 were reviewed and the total number of malfunction test to be performed annually was reduced. Only the malfunctions included in the simulation to meet the requirements of ANS/ANSI 3.5 -1985 Section 3.1.2 are tested on a periodic basis. These tests are scheduled such that approximately 25 percent of these required malfunctions are tested each year.
Page 15 of 33
The number of performance tests will be adjusted as malfunctions are added to or deleted from the certification test program as dictated by operator training program requirements. These additions and/or deletions will be noted in subsequent quadrennial reports, however, the test program will be maintained in compliance with ANSI/ANS-3.5-1985. Appendix B lists the malfunctions which meet this requirement and schedule for performing them over the next four years.
4.2 Simulator Test Procedure to ANSI/ANS-3.5-1985 Cross-Reference Appendix E reflects those malfunctions and malfunction test used to show compliance to the ANSI 3.5 1985 section 3.1.2 list of required malfunctions.
4.3 Summary of Certification Deficiencies Certification deficiencies are listed in Appendix C to this report. To be listed in this appendix, test results must be identified as either "Satisfactory with Deficiencies" or "Unsatisfactory". Deficiencies against these tests will be resolved based on training impact in accordance with the four-level scheduling system outlined in Harris Training Administrative Procedures. There are no tests identified as "Unsatisfactory" at this time.
4.4 Certification Test Abstracts Abstracts of the certification tests were included in the original certification submittal or subsequent quadrennial reports. Abstracts for those new tests identified in the above appendix are attached to this report.
Page 16 of 33
APPENDIX A SCHEDULE OF ANNUALOPERABILITYTESTS The following tests are performed on an annual basis.
Real Time Test R~
RTI'-001 SST-001 SST-002 Computer Real Time Test 100 Percent Power and Accuracy Test 75 Percent Power Accuracy Test SST-003 30 Percent Power Accuracy Test Transient Tests TT-001 Manual Reactor Trip Tl'-002 Simultaneous Trip of all Feedwater Pumps TT-003 Simultaneous Closure of All Main Steam Isolation Valves Ti'-004 Simultaneous Trip of All Reactor Coolant Pumps TT-005 One Reactor Coolant Pump Trip TT-006 Turbine Trip Below P-10 TT-007 Maximum Rate Power Ramp TT-008 Maximum Size RCS Leak Inside Containment With Loss of Off-site Power TT-009 Maximum Size Steam Leak Inside Containment TT-010 Slow RCS Depressurization to Saturation Using PORV's and No SI Page 17 of 33
APPENDIX B SCHEDULE OF MALFUNCTIONTESTS MALFUNCTIONTESTS FIRST YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1042 Reactor Trip Breakers Fail (B fails to open) 3.1.2(24)
MT-111A Pressurizer Steam Space Leak 3.1.2(lc)
MT-12 NSW Pump Trip and Loss of NSW 3.1.2(6)
MT-1222 Steam Generator Tube Rupture (S/G A) 3.1.2(la)
MT-1231 RCP Trip From 100 Percent Power (RCP-C) 3.1.2(4)
MT-135 RHR Bypass Line Leak (Train A) 3.1.2(7)
MT-42 Logic Cabinet Urgent Failure 3.1.2(13)
MT-44 Stuck Rod 3.1.2(12)
MT-51 Letdown Isolation Valve Failure (1CS-11) 3.1.2(23)
MT-61 Station Blackout 3.1.2(3)
MT-623 Loss of 120-VAC Uninterruptible Power (Power Supply SIII) 3.1.2(3)
MT-710 Condensate Pump Trip (Pump A) 3.1.2(9)
MT-724 Feedline Break Outside Containment 3.1.2(20)
MT-86 Steam Generator Relief Valve Failure (Open) 3.1.2(20)
MT-97 Power Range Channel Detector Failure (Low) 3.1.2(21)
MT-MSC3 Annunciator System Failure 3.1.2(22)
RCS-18 Small Break LOCA 3.1.2(lc)
Page 18 of 33
MALFUNCTIONTESTS SECOND YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1032 Safety Injection Failure (Train A, Fail to Initiate) 3.1.2(23)
MT-1041 Reactor Trip Breakers Fail (Both Inadvertent Open) 3.1.2(19)
MT-112 Loss of Instrument Air to the Reactor (Reactor Auxiliary 3.1.2(2)
Building)
MT-1132 Pressurizer Relief Valve Failure (444B Without P-11 Interlock) 3.1.2(18)
MT-114 Pressurizer Safety Valve Failure (8010C Open) 3.1.2(1d)
MT-1211 RCS Leak Within Capacity of Charging Pumps 3.1.2(lc)
MT-1212 LOCA Within Capacity of the SI Pumps 3.1.2(1c)
MT-1214A LOCA on RHR 3.1.2(17)
MT-1232 Reactor Coolant Pump Trips (RCP-C) 3.1.2(4)
MT-151 Inadvertent Turbine Trip 3.1.2(15)
MT45 Ejected Rod 3.1.2(12)
MT-571 Letdown Pressure Control Valve Failure (PK-145 Open) 3.1.2(18)
MT-651 Loss of 6.9-KV Emergency Bus (1A-SA) 3.1.2(3)
MT-67 Diesel Generator Failure 3.1.2(3)
MT-712A Turbine Driven Auxiliary Feedwater Pump Trip 3.1.2(23)
MT-719 Main Feedwater Pump Trip (Pump B) 3.1.2(10)
MT-723 Feedline Break Inside Containment 3.1.2(20)
MT-82 Steam Break Outside Containment 3.1.2(20)
Page 19 of 33
I
~ ~
MALFUNCTIONTESTS THIRD YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1072 Turbine Runback Failure (Failure to Runback) 3.1.2(22)
MT-1110 Pressurizer Level Control Band Shift Down 3.1.2(22)
MT-113 Loss of Instrument Air to the Containment Building 3.1.2(2)
'T-1211B Uncoupled Control Rod 3.1.2(12)
MT-1213 A RCS Leak (Large Break) 3.1.2(1b)
MT-1221 Steam Generator Tube Leak (S/G B) 3.1.2(1a)
MT-136 RHR Sump Valves Fail to Open 3.1.2(23)
MT-333 Hotwell Level Controller Failure (LC-1901 Low) 3.1.2(5)
MT-34 Loss of Condenser Vacuum 3.1.2(5)
MT-612 Generator Output Breakers Fail to Trip 3.1.2(16)
MT-68 Automatic Voltage Regulator Failure (High) 3.1.2(16)
MT-711A Motor Driven Auxiliary Feedwater Pump Trip 3.1.2(10)
MT-76 Auxiliary Feedwater Flow Control Valve Failure (Open) 3.1.2(23)
MT-81 Steamline Break Inside Containment 3.1.2(20)
MT-815 Main Steam Header Break 3.1.2(20)
MT-91 Source Range Instrument Failure (N31 High) 3.1.2(21)
RCS-6 Median Select Circuit Failure 3.1.2(22)
Page 20 of 33
MALFUNCTIONTESTS FOURTH YEAR TEST TEST TITLE ANSI 3.5 1985 NUMBER Reference MT-1015 Diesel Generator Sequencer Fails to Complete Block 1 3.1.2(23)
MT-111 Loss of Instrument Air (Turbine Building) 3.1.2(2)
MT-112A Pressurizer Spray Valve Failure 3.1.2(18)
MT-1211A RCS Fuel Rod Breach 3.1.2(14)
MT-1212A RCS Leakage into an Accumulator 3.1.2(23)
MT-21 Component Cooling Water Pump Trip 3.1.2(8)
MT-22A Loss of CCW to RHR Heat Exchanger 3.1.2(8)
MT-28 Loss of CCW to the Reactor Coolant Pumps 3.1.2(8)
MT-331 Hotwell Level Controller Failure (LC-1900 High) 3.1.2(5)
MT-431 Dropped Rod (One Rod) 3.1.2(12)
MT-512 RCP Number 1 Seal Failure (RCP B) 3.1.2(8)
MT-616 Diesel Generator Breaker Inadvertent Trip 3.1.2(3)
MT-912 Intermediate Range Control Power Fuse Blown 3.1.2(21)
CRF-16 Control Rod Stuck on Trip (NEW) 3.1.2(12)
CVC-30 Charging/Safety Injection Pump Speed Changer Failure (NEW) 3.1.2(23)
MSC-4 Inadvertent Containment Isolation Phase A 3.1.2(22)
SWS-7 Normal Service Water Pump Shaft Shear (NEW) 3.1.2(6)
Page 21 of 33
APPENDIX C
SUMMARY
OF CE<RTIFICATION DEFICIENCIE<S Performance tests were run as a part of the current (March 1995 - March 1999) certification testing program. The resulting deficiencies that remain unresolved at this time are shown below.
TEST/RE<SULTS CMS/DR ¹ TITLE</DE<SCRIPTION MT-1211A 98-261 RCS Fuel Rod Breach The acceptance criteria is 1000X normal and 800X normal was achieved. Efforts are ongoing to determine if the acceptance criteria is correct for a best estimate situation vice a worst case situation of the normal EP environment.
Page 22 of 33
~ ~
1 4
APPENDIX D SIMULATOR CERTIFICATIONTEST ABSTRACTS This appendix contains a complete list (index) of the performance test performed per schedule, in the previous certification period. Abstracts of these test were included in the previous certification submittals and are not being included in this submittal unless it is one of the tests added in the past four years.
INDEX OF ABSTRACTS Simulator Ph sical Fidelit Test (2)
FT-001 Simulator Physical Fidelity Test FT-002 Simulator Model Limits Exceeded Test Malfunction Tests (180)
MT-1013 Inadvertent Feedwater Isolation MT-1014 Inadvertent Main Steam Isolation MT-1015 Diesel Generator Sequencer Fails to Complete Block 1 MT-10161 Failure of Rod Blocks to Block (C-1)
MT-10162 Failure of Rod Blocks to Block (C-2, C-3, C-4)
MT-10165 Failure of Rod Block to Block (C-5)
MT-1017 Failure of Permissive Interlock P-14 MT-1031 Safety Injection Failure (Train B, Inadvertent)
MT-1032 Safety Injection Failure (Train A, Fail to Initiate)
MT-1041 Reactor Trip Breakers Fail (Both Inadvertent Open)
MT-1042 Reactor Trip Breakers Fail (B fails to open)
MT-106 False Containment Spray Actuation MT-1071 Turbine Runback Failure (Erroneous Runback)
MT-1072 Turbine Runback Failure (Failure to Runback)
MT-111 Loss of Instrument Air (Turbine Building)
MT-1110 Pressurizer Level Control Band Shift Down MT-111A Pressurizer Steam Space Leak MT-112 Loss of Instrument Air to the Reactor (Reactor Auxiliary Building)
MT-112A Pressurizer Spray Valve Failure MT-113 Loss of Instrument Air to the Containment Building (AIR-1, 1)
MT-1131 Pressurizer Relief Valve Failure (445A With P-11 Interlock)
MT-1132 Pressurizer Relief Valve Failure (444B Without P-11 Interlock)
MT-114 Pressurizer Safety Valve Failure (8010C Open)
MT-1151 Pressurizer Pressure Channel Failure (PT~ High)
MT-1152 Pressurizer Pressure Channel Failure (PTM5 Low)
MT-1162 Pressurizer Pressure Channel Failure (PT-457 Low)
Page 23 of 33
MT-117'1 Pressurizer Level Channel Failure (LTC59 Low)
MT-118 Pressurizer Backup Heaters Groups A and B Failure MT-12 NSW Pump Trip and Loss of NSW MT-121 Emergency Service Water Pump Trip MT-1210 RCP A, B, C High Vibration MT-1211 RCS Leak Within Capacity of Charging Pumps MT-1211A RCS Fuel Rod Breach MT-1211B Uncoupled Control Rod MT-1212 LOCA Within Capacity of the SI Pumps MT-1212A RCS Leakage into an Accumulator MT-1213 RCS Vessel Flange Leak MT-1213A RCS Leak (LOCA)
MT-1214 RCP Bearing Oil Reservoir Leak MT-1214A LOCA on RHR MT-1215 RCS Thermal Barrier Leak into CCW System MT-1216 RCS Flow Transmitter Failure (FT-436 w)
MT-1221 Steam Generator Tube Leak (S/G B)
MT-1222 Steam Generator Tube Rupture (S/G A)
MT-1231 RCP Trip From 100 Percent Power (RCP-C)
MT-1232 Reactor Coolant Pump Trips (RCP-C)
MT-124 Reactor Coolant Pump Trip (Locked Rotor)
MT-125 RCP Shaft Break Accident (RCP B)
MT-126 RCS Boron Dilution MT-1281 RCS Protection RTD Failure (TE-412B Low)
MT-129 RCS WR Pressure Transmitter Failure (PT-403 High)
MT-131 RHR Pump Trip (Pump A)
MT-131A RHR Pump Trip (Pump A)
MT-1321 RHR HX Flow Control Valve Failure (FCV-603A Closed)
MT-1322 RHR HX Flow Control Valve Failure (FCV-603B Open)
MT-1331 RHR HX Bypass FCV Failure (FK-605A1 Open)
MT-1332 RHR HX Bypass FCV Failure (FK-605B1 Closed)
MT-134 RHR to Letdown Valve Failure (HCV-142.1 Open)
MT-135 RHR Bypass Line Leak (Train A)
MT-136 RHR Sump Valves Fail to Open MT-137 Containment Spray Pump Failure MT-138 Containment Spray Pump Discharge Valve Failure MT-141 Containment Fan Cooler Unit Trip MT-151 Inadvertent Turbine Trip MT-152 Turbine Protection Trip Failure MT-154 Turbine Vibration MT-155 Governor Valve Failure (GV-3 Closed)
Page 24 of 33
I MT-157 Turbine DEH Computer Failure MT-17 Refueling Water Storage Tank Leak MT-21 Component Cooling Water Pump Trip MT-210 Seal Water Heat Exchanger Tube Leak MT-22 Loss of CCW to RHR Heat Exchanger MT-22A Loss of CCW to RHR Heat Exchanger MT-23 CCW Leak into the Service Water System MT-24 Component Cooling Water Header Supply Valve Failure (Closed)
MT-25 Letdown Heat Exchanger Tube Leak MT-26 Loss of CCW to RCP Thermal Barrier MT-271 Letdown Temperature Controller Failure (TK-144 Low)
MT-272 Letdown Temperature Controller Failure (TK-144 High)
MT-28 Loss of CCW to the Reactor Coolant Pumps MT-31 Circulating Water Pump Trip MT-32 Main Condenser Tube Leak MT-331 Hotwell Level Controller Failure (LC-1900 High)
MT-333 Hotwell Level Controller Failure (LC-1901 Low)
MT-34 Loss of Condenser Vacuum MT-35 Loss of Condenser Vacuum Pump MT-41 Power Cabinet Urgent Failure MT-410 DRPI-Open or Shorted Coil MT-411 Improper Bank Overlap MT-412 Control Bank Rod Step Counter Failure MT-413 Rod Speed Deadband Control Failure MT-42 Logic Cabinet Urgent Failure MT431 Dropped Rod (One Rod)
Stuck Rod MT'T'T-461 Ejected Rod Uncontrolled Automatic Rod Motion MT462 Uncontrolled Manual Rod Motion MT-47 Failure of Auto Rod Blocks to Block (C-11)
MT48 TREF Failure DRPI Loss of Voltage MT'T-51 Letdown Isolation Valve Failure (1CS-11)
MT-5111 VCT Level Transmitter Failure (LT-112 High)
MT-512 RCP Number 1 Seal Failure (RCP B)
MT-513 RCP Number 2 Seal Failure (RCP A)
MT-514 RCP Number 3 Seal Failure (RCP C)
MT-5151 Boric Acid Flow Xmtr. Failure (FT-113 to 20 gpm)
MT-5152 Boric Acid Flow Xmtr. Failure (FT-113 to 0 gpm)
MT-516 Boric Acid Filter Plugged Page 25 of 33
MT-'518'1 Seal Injection Flow Control Valve Failure (HC-186 Open)
MT-5182 Seal Injection Flow Control Valve Failure (HC-186 Closed)
MT-52 VCT Outlet Isolation Valve Failure (LCV-115E Closed)
MT-5201 Failure of Charging Flow Control Valve MT-5202 Failure of Charging Flow Control Valve (Closed)
MT-523 High Temperature Divert Valve (TCV-143) Failure MT-524 Charging Pump Suction From RWST Failure (115D Open)
MT-525 Charging Pump Mini Flow Valve Failure (1CS-182 Closed)
MT-526 Boric Acid Pump Trip MT-527 Charging Line Containment Isolation Valve Failure MT-5281 Charging Line Leak on Charging Pump Suction MT-5282 Charging Pump Discharge Line Leak Before FT-122 MT-5283 Charging Line Leak Between FT-122 and 1CS-235 MT-5284 Charging Line Leak in Containment Before Regen HX MT-5285 Charging Line Leak Between Regen HX and 1CS-492 MT-53 Letdown Line Leak Inside Containment MT-54 Letdown Line Leak Outside Containment MT-55 Charging Pump Trip MT-56 Reactor Makeup Water Pump Trip MT-571 Letdown Pressure Control Valve Failure (PK-145 Open)
MT-572 Letdown Pressure Control Valve Failure (PK-145 Closed)
MT-58 Loss of Normal Letdown MT-59 VCT Divert Valve Control Failure (HUT)
MT-61 Station Blackout MT-6101 Loss of Unit Auxiliary Transformer A phase MT-6102 Loss of Unit Auxiliary Transformer B phase MT-612 Generator Output Breakers Fail to Trip MT-615 Diesel Generator Governor Failure MT-616 Diesel Generator Breaker Inadvertent Trip MT-623 Loss of 120-VAC Uninterruptible Power (Power Supply SIII)
MT-632 Loss of 1&-VDC Emergency Bus (DP 1B-SB)
MT-64 Loss of 6.9 KV Auxiliary Bus (1B)
MT-645 Loss of 6.9 Aux Bus 1E MT-651 Loss of 6.9-KV Emergency Bus (1A-SA)
MT-661 Loss of a 250-VDC Nonvital Bus (DP-1-250)
MT-662 Loss of a 125-VDC Nonvital Bus (DP 1A)
MT-67 Diesel Generator Failure MT-68 Automatic Voltage Regulator Failure (High)
MT-69 Loss of Start-up Transformer 1A MT-692 Loss of Start-up Transformer 1B MT-710 Condensate Pump Trip (Pump A)
Page 26 of 33
MT-'711A Motor Driven Auxiliary Feedwater Pump Trip MT-712 Failure of Excess Condensate Dump Valve (Closed)
MT-712A Turbine Driven Auxiliary Feedwater Pump Trip MT-714 Condensate Storage Tank Leak MT-715 Heater Drain Pump Trip (Pump B)
MT-719 Main Feedwater Pump Trip (Pump B)
. MT-72 Condensate Booster Pump Trip (Pump B)
MT-720 Main Feedwater Pump Recirc Valve Failure (Pump 1B)
MT-721 Feedwater Flow Transmitter Failure (FT466 Low)
MT-722 Feedwater Control Valve Position Failure (LCV-488 Open)
MT-723 Feedline Break Inside Containment MT-724 Feedline Break Outside Containment MT-725 Steam Generator Level Chan. Failure (LT-496 Low)
MT-73 Turbine Driven Auxiliary Feedwater Pump Speed Control Oscillates MT-74 Steam Generator Backleakage MT-76 Auxiliary Feedwater Flow Control Valve Failure (Open)
MT-771 Feedwater Bypass Valve Failure (Closed)
MT-772 Feedwater Bypass Valve Failure (Open)
MT-78 Turbine Driven Auxiliary Feedwater Flow Control Valve Failure (Closed)
MT-81 Steamline Break Inside Containment MT-810 Steam Dump Control Failure (Closed)
MT-811 Mechanically Stuck Condenser Dump Valve (PCVA08 Open)
MT-812 Steam Dump Permissive (P-12) Failure MT-814 Steam Failure to TDAFW Pump (1MS-72 Closed)
MT-815 Main Steam Header Break MT-82 Steam Break Outside Containment MT-83 Steam Header Press. Detector Failure (PT-464 High)
MT-84 Steam-Line Flow Transmitter FT-494)
MT-85 Steam Generator Press. Xmtr. Failure (PT-485 High)
MT-86 Steam Generator Relief Valve Failure (Open)
MT-87 MSIV Failure (S/G B Shut)
MT-88 Steam Generator Safety Valve Failure (Open)
MT-89 Atmospheric Steam Dump Valve Failure (PCV408J Open)
MT-91 Source Range Instrument Failure (N31 High)
MT-911 Source Range Instrument Power Fuse Blown MT-912 Intermediate Range Control Power Fuse Blown MT-913 Power Range Control Power Fuse Blown MT-92 Source Range Pulse Height Discriminator Failure MT-93 Failure of Source Range High Voltage to Disconnect MT-94 Source Range Channel High Voltage Failure MT-95 Intermediate Range Channel Failure Page 27 of 33
I MT-'96 Intermediate Range Channel Gamma Compensation Failure MT-97 Power Range Channel Detector Failure (Low)
MT-98 Power Range Channel Failure (Low)
MT-MSC3 Annunciator System Failure MT-RCS-18 Small Break LOCA MT-RCS-6 Median Select Circuit Failure MT-RPS4 Inadvertent Containment Isolation Phase B MT-CRF16 Control Rod Stuck on Trip (NEW)
MT-CVC29 CSIP Shaft Shear (NEW)
MT-CVC30 CSIP Speed Changer Failure (NEW)
MT-DSG5 Diesel Generator Emergency Trip (NEW)
MT-HVA4 Essential Services Chiller Trip MT-SWS4 Service Water Discharge Valve Fails to Open (NEW)
MT-SWSS B NSW Pump Fails to Auto Start (NEW)
MT-SWS6 SW From Containment Fan Coolers Back Pressure Valve Failure (NEW)
MT-SWS7 NSW Pump Shaft Shear (NEW)
Page 28 of 33
Normal 0 erator Surveillance Tests (25)
NOST-1004 OST-1004, Power Range Heat Balance NOST-1005 OST-1005, Control Rod and Rod Position Exercise NOST-1007 OST-1007, CVCS/SI System Operability NOST-1008 OST-1008, RHR Pump Operability NOST-1009 OST-1009, Containment Spray Operability NOST-1013 OST-1013, 1A-SA Emergency Diesel Generator Operability NOST-1014 OST-1014, Turbine Valve Test NOST-1018 OST-1018, Main Steam Isolation Valve and Main Feedwater Isolation Valve Operability Test NOST-1021 OST-1021, Daily Surveillance Requirements Modes 1 and 2 NOST-1022 OST-1022, Daily Surveillance Requirements Modes 3 and 4 NOST-1026 OST-1026, Reactor Coolant System Leakage Evaluation NOST-1036 OST-1036, Shutdown Margin Calculation NOST-1039 OST-1039, Calculation of Quadrant Power Tilt Ratio NOST-1046 OST-1046, Main Steam Isolation Valve Operability Test NOST-1054 OST-1054, Permissives P-6 and P-10 Verification NOST-1073 OST-1073, 1B-SB Emergency Diesel Generator Operability NO ST-1075 OST-1075, Turbine Mechanical Overspeed Trip Test NOST-1076 OST-1076, AFW Pump 1BCB Operability Test - Quarterly NOST-1080 OST-1080, Turbine Driven AFW Pump Full Flow Test NOST-1087 OST-1087, Motor Driven AFW Pumps Flow Test NOST-1092 OST-1092, RHR Pump 1B-SB Operability NOST-1126 OST-1126, Reactor Coolant Pump Seals Controlled Leakage Evaluation NOST-1211 OST-1211, AFW Pump 1A-SA Operability Test - Quarterly NOST-1316 OST-1316, CCW System Operability - Quarterly NOST-1411 OST-1411, AFW Pump 1X-SAB Operability Normal 0 erations Tests (9)
NOT-001 GP-001, Plant Fill and Vent NOT-002 GP-002, Plant Heatup NOT-003 Recovery to Rated Power Following Reactor Trip NOT-004 GP-004, Reactor Startup NOT-005 GP-005, Plant Startup NOT-006 GP-006, Plant Shutdown NOT-007 GP-007, Plant Cooldown NOT-008 GP-008, Plant Drain to Mid-Loop NOT-009 GP-009, Refueling with Cavity Fill and Drain page 29 of 33
Real Time Test (1)
RTT-001 Computer Real Time Test SST-001 100 Percent Power Accuracy Test SET-002 75 Percent Power Accuracy Test SST-003 30 Percent Power Accuracy Test Transient Tests (10)
TT-001 Manual Reactor Trip TT-002 Simultaneous Trip of all Feedwater Pumps TT-003 Simultaneous Closure of All Main Steam Isolation Valves TT-004 Simultaneous Trip of All Reactor Coolant Pumps TI'-005 One Reactor Coolant Pump Trip TT-006 Turbine Trip Below P-10 TT-007 Maximum Rate Power Ramp Tl'-008 Maximum Size RCS Leak Inside Containment With Loss of Off-site Power TT-009 Maximum Size Steam Leak Inside Containment TT-010 Slow RCS Depressurization to Saturation Using PORV's and No SI Page 30 of 33
APPE<NDIX E Scheduled Malfunction Test to ANSI 3.5 1985 Cross Reference This appendix contains a list (index) of the malfunction test to be performed in the upcoming certification cycle with a cross reference to the specific ANSI 3.5 1985 requirement. Abstracts of these test were included in the previous certification submittals and are not being included in this submittal unless it is one of the tests added in the past four years.
ANSI 3.5 1985 TEST TITLE Test Number Reference 3.1.2(la) Steam Generator Tube Rupture (S/G A) MT-1222 3.1.2(la) Steam Generator Tube Leak (S/G B) MT-1221 3.1.2(lb) RCS Leak (Large Break) MT-1213A 3.1.2(lc) Small Break LOCA RCS-18 3.1.2(lc) RCS Leak Within Capacity of Charging Pumps MT-1211 3.1.2(lc) LOCA Within Capacity of the SI Pumps MT-1212 3.1.2(lc) Pressurizer Steam Space Leak MT-111A 3.1.2(ld) Pressurizer Safety Valve Failure (8010C Open) MT-114 3.1.2(2) Loss of Instrument Air to the Containment Building MT-113 3.1.2(2) Loss of Instrument Air to the Reactor (Reactor Auxiliary MT-112 Building) 3.1.2(2) Loss of Instrument Air (Turbine Building) MT-111 3.1.2(3) Station Blackout MT-61 3.1.2(3) Loss of 120-VAC Uninterruptible Power (Power Supply SIII) MT-623 3.1.2(3) Loss of 6.9-KV Emergency Bus (1A-SA) MT-651 3.1.2(3) Diesel Generator Failure MT-67 3.1.2(3) Diesel Generator Breaker Inadvertent Trip MT-616 3.1.2(4) RCP Trip From 100 Percent Power (RCP-C) MT-1231 3.1.2(4) Reactor Coolant Pump Trips (RCP-C) MT-1232 3.1.2(5) Hotwell Level Controller Failure (LC-1901 Low) MT-333 3.1.2(5) Loss of Condenser Vacuum MT-34 3.1.2(5) Hotwell Level Controller Failure (LC-1900 High) MT-331 3.1.2(6) NSW Pump Trip and Loss of NSW MT-12 3.1.2(6) Normal Service Water Pump Shaft Shear (NE<W) SWS-7 3.1.2(7) RHR Bypass Line Leak (Train A) MT-135 3.1.2(8) Component Cooling Water Pump Trip MT-21 Page 31 of 33
~
j' ~
3.1.2(8) Loss of CCW to RHR Heat Exchanger MT-22A 3.1.2(8) Loss of CCW to the Reactor Coolant Pumps MT-28 3.1.2(8) RCP Number 1 Seal Failure (RCP B) MT-512 3.1.2(9) Condensate Pump Trip (Pump A) MT-710 3.1.2(10) Main Feedwater Pump Trip (Pump B) MT-719 3.1.2(10) Motor Driven Auxiliary Feedwater Pump Trip MT-711A 3.1.2(1 1) N/A to HNP. See exceptions to ANSI 3.5 item 3 on page 5 3.1.2(12) Stuck Rod MT-44 3.1.2(12) Uncoupled Control Rod MT-1211B 3.1.2(12) Dropped Rod (One Rod) MT-431 3.1.2(12) Ejected Rod MT'RF-16 3.1.2(12) Control Rod Stuck on Trip (NEW) 3.1.2(13) Logic Cabinet Urgent Failure 3.1.2(14) RCS Fuel Rod Breach MT'T-1211A 3.1.2(15) Inadvertent Turbine Trip MT-151 3.1.2(16) Generator Output Breakers Fail to Trip MT-612 3.1.2(16) Automatic Voltage Regulator Failure (High) MT-68 3.1.2(17) LOCA on RHR MT-1214A 3.1.2(18) Pressurizer Relief Valve Failure (444B Without P-11 Interlock) MT-1132 3.1.2(18) Letdown Pressure Control Valve Failure (PK-145 Open) MT-571 3.1.2(18) Pressurizer Spray Valve Failure MT-112A 3.1.2(19) Reactor Trip Breakers Fail (Both Inadvertent Open) MT-1041 3.1.2(20) Feedline Break Outside Containment MT-724 3.1.2(20) Steam Generator Relief Valve Failure (Open) MT-86 3.1.2(20) Feedline Break Inside Containment MT-723 3.1.2(20) Steam Break Outside Containment MT-82 3.1.2(20) Steamline Break Inside Containment MT-81 3.1.2(20) Main Steam Header Break MT-815 3.1.2(21) Power Range Channel Detector Failure (Low) MT-97 3.1.2(21) Source Range Instrument Failure (N31 High) MT-91 3.1.2(21) Intermediate Range Control Power Fuse Blown MT-912 3.1.2(22) Annunciator System Failure MT-MSC3 3.1.2(22) Turbine Runback Failure (Failure to Runback) MT-1072 3.1.2(22) Pressurizer Level Control Band Shift Down MT-1110 3.1.2(22) Median Select Circuit Failure RCS-6 3.1.2(22) Inadvertent Containment Isolation Phase A MS'T-51 3.1.2(23) Letdown Isolation Valve Failure (1CS-11) 3.1.2(23) Safety Injection Failure (Train A, Fail to Initiate) MT-1032 3.1.2(23) Turbine Driven Auxiliary Feedwater Pump Trip MT-712A Page 32 of 33
3.1:2(23) RHR Sump Valves Fail to Open MT-136 3.1.2(23) Auxiliary Feedwater Flow Control Valve Failure (Open) MT-76 3.1.2(23) Diesel Generator Sequencer Fails to Complete Block 1 MT-1015 3.1.2(23) RCS Leakage into an Accumulator MT-1212A 3.1.2(23) Charging/Safety Injection Pump Speed Changer Failure (NEW) CVC-30 3.1.2(24) Reactor Trip Bnreakers Fail (B fails to open) MT-1042 3..1,2(25) N/A to HNP. See Exceptions to ANSI 3.5 item 5 on page 5.
Abstracts for those new tests identified in the above appendix are attached to this report following this page.
Page 33 of 33
~ ~
4 Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWSS or: MT-SWSS Malfunction Number: CO SWS Z21 Year: 3 Title: B NSW Pump Fails to Auto Start on a A Pump Faiure ANSUANS-3.5-1985 Section 3.2.3(6)
Available Options: Test the proper response of the B NSW Pump to a Malfunction of the A NSW Pump simultaneous with a failure of the B NSW Pump Auto Start Relay 2-2181. It is not the intent of the test to address the hydraulic response of the NSW system. Either A or B pump malfunctions are available.
Tested Options: This test address the B NSW Pump.
Initial Conditions: Any power with A NSW Pump in service Test
Description:
This test verifies that with a relay failure inserted on the auto start relay of B NSW Pump and a malfunction occurring on the A NSW Pump via the simulated malfunction SWS1A that the B NSW pump will not automatically start. The result should prompt the operator to manually start the B NSW Pump and it will start from a switch input. The test is complete when the B NSW pump has been started and the discharge valve has been opened.
Baseline Data: (1) Panel of experts.
Current Status: Date Achieved Status: 2/18/97 Year 1: Results 1: Year 2: Results 2:
Year 3: 2/18/97 Results 3: S Year 4: Results 4:
Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficiencies:
Abslract Page
C 4
A I
1
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWS6 or: MT-SWS6 Malfunction Number: SWS5a Year: 3 Title: SW From CNM Fan Cooler Back Pressure Valve fail open ANSVANS-3.5-1985 Section 3.2.3(6)
Available Options: This malfunction allows the operator to fail the SWS back pressure control valve for the Containment Fan Coolers to any selected valve. Options are available for the A train as well as the B train valve.
Tested Options: This test address the A train valve SW-116.
Initial Conditions: Mode 1, approximately 100% power.
Test
Description:
This test verifies that with the malfunction inserted at 100% that SW 116 does not shut in response to a ESW Booster Pump start when SI is activated. The test will insert the malfunction, verify that the valve is open, insert a large LOCA to cause SI activation and thc verify the valve position based on MCB indications and SW pressures.
Baseline Data: (1) Panel of experts.
Current Status: Date Achieved Status: 10/9/97 Year 1: Results 1: Year 2: Results 2:
Year 3: 10/9/97 Results 3: S Year 4; Results 4:
Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficiencies:
hbslraer Page
~ ~
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CRF16 or: MT-CRF16 Malfunction Number: CRF-16 Year: 4 Title: Control Rod Stuck on Trip ANSUANS-3.5-1985 Section 2.1.2(12)
Available Options: The malfunction is one of 8 (CRF16a-h) that can select any of the 52 control rods.
Tested Options: CRF16A for Rod G-3 at 24 steps. CRF16C for Rod E-11 at 48 steps. CRF16E for Rod D-4 at 72 steps. CRF16h for Rod F-6 at a variable position above the current value.
Initial Conditions: Mode 1, approximately 50% power.
Test
Description:
Eight identical malfunctions are available that will affect any of the Control or Shutdown Rods. This test uses four of these malfunctions simultaneously to verify the ability to stick multiple rods on a Reactor Trip. In at least one case the selected stuck position is above the current rod position of the rod. In that case thc rod should stick at the actual rod height at the time of the trip.
Baseline Data: (1) Panel of experts Current Status: Date Achicvcd Status: 9/23/98 Year I: Results 1: Year 2: Results 2:.
Year 3: Results 3: Year 4: 9/23/98 Results 4: S Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficiencies:
Absrrael Page 261
~
4
~
r t+E If
Harris
)
Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CVC29 or: MT-CVC29 Malfunction Number: CVC-29 Year: 4 Title: Charging Pump Shaft Shear ANSVANS-3.5-1985 Section 3.1.2 (18)
Available Options: Three malfunctions are available as CVC29A-C. CVC29C will impact the "C" pump reguardless of which power bus it is attached Tested Options: Charging Pump A shaft shear.
Initial Conditions: Any at power condition with CSIP "A" in service Test
Description:
The shaft on the "A" CSIP shears between the speed changer and the pump. The charging header will depressurize to less than RCS pressure causing a loss of charging flow and seal injection. Ifcharging flow is not restored letdown system will heat up and activate alarms accordingly. The CSIP amps should decrease to a value representing the motor with only the speed changer load.
Baseline Data: (1) Panel of experts. (2) OP-107, Chemical and Volume Control System. (3) Hot functional test CVCS Current Status: Date Achieved Status: 10/19/98 Year 1: Results 1: Year 2: Results 2:
Year 3: Results 3: Year 4: 10/19/98 Results 4: S Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficiencies:
Abstract Page 262
4 A'~
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-CVC30 or: MT-CVC30 Malfunction Number: CVC-30 Year: 4 Title: Charging/Safety Injection Pump Speed Changer Failure ANSVANS-3.5-1985 Section 3.1.2 (18)
Available Options: Three malfunctions are available as CVC29A-C. CVC29C will impact the "C" pump reguardless of which power bus it is attached Tested Options: Charging Pump B speed changer failure Initial Conditions: Any at power condition with CSIP "B" in service Test
Description:
The shaft on the "B" CSIP shears in the speed changer causing a reduction of about 10% in the speed of the pump. The charging header will depressurize to less than RCS pressure causing a loss of charging flow and seal injection. Ifcharging flow is not restored the letdown system will heat up and activate alarms accordingly. The CSIP amps should increase about 15 amps greater than thc previous value representing the motor plus a binding in the speed changer. This malfunction is based on event that occurred at the HNP.
Baseline Data: Plant data from ACR 93-0111 Current Status: Date Achieved Status: 10/19/98 Year 1: Results I: Year 2: Results 2:
Year 3: Results 3: Year 4: 10/19/98 Results 4: S Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Dcficicncics:
Abstract Page 263
I I
m
Harris a ~ I Simulator Performance Test Abstracts
~
~
/0-Mar-99 Test Number: MT-DSG5 or: MT-DSG5 Malfunction Number: DSG-5 Year: 2 Title: Diesel Generator Emergency Trip ANSVANS-3.5-1985 Section 3.1.2(23)
Available Options: The malfunction is available for either Emergency Diesel Generator.
Tested Options: Diesel Generator A Emergency Failure Initial Conditions: Mode l, approximately 100% power Test
Description:
This test inserts a diesel generator emergency trip following a normal start. After the trip is verified, an emergency start signal is initiated. Indications and alarms consistent with starting air being depleted are verified as well as the removal of the start signal by the low air pressure condition. To complete the test the malfunction is cleared, the trip is reset, and diesel generator is started.
Baseline Data: (I) Panel of Experts Current Status: S Date Achieved Status: 9/25/96 Year 1: Results 1: Year 2: 9/25/96, Results 2: S Year 3: Results 3: Year 4: Results 4:
Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficiencies:
Abslract Page 26'4
~
g$
/)
P'y
Harris Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWS4 or: MT-SWS4 Malfunction Number: SWS-4 Year: 2 Title: Service Water Discharge Valve Fails to Open ANSVANS-3.5-1985 Section 3.2.3(6)
Available Options: This procedure tests the proper response to a failure of a Normal Service Water (NSW) pump discharge valve to stroke to 10% within 10 seconds. This results in a trip of the NSW pump. The malfunction is available for either A or B pump.
Tested Options: This test addresses the A NSW pump.
Initial Conditions: Mode 3 with A NSW Pump in service.
Test
Description:
This test verifies a failure of the NSW pump discharge valve to stroke to 10% in less than 10 seconds. This results in a trip of the NSW pump.
Basclinc Data: (I) Panel of experts.
Current Status: Date Achieved Status: 10/17/96 Year 1: Results 1: Year 2: 10/17/96 Results 2: S Year 3: Results 3: Year 4: Results 4:
Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficiencies:
Abslract Page 268
lg C
P~ '-r~
J'a p'4 4
HyrrIIs Simulator Performance Test Abstracts 09-Mar-99 Test Number: MT-SWS7 or: MT-SWS7 Malfunction Number: SWS-7 Year: 4 Title: Nortnal Service Water Pump Shaft Shear ANSVANS-3.5-1985 Section Available Options: This malfunction allows the simulator operator to break the Normal Service Water (NSW)
Pump shaft at the pump to motor coupling. Options are available for either A or B NSW pumps.
Tested Options: This test address the A NSW pump.
Initial Conditions: Any power with A NSW pump in service.
Test
Description:
The simulator is initialized to an at power condition with "A" NSW pump in service. The malfunction to cause the shaft shear is inserted and plant response noted. The ESW headers will depressurize causing an auto start of both ESW pumps and alignment of the ESW to return water to the Aux Reservoir will occur. The NSW system will also depressurize since an auto start of the "B" NSW pump will not occur.
Baseline Data: (l) Panel of experts.
Current Status: Date Achieved Status: 8/20/98 Year 1: Results 1: Year 2: Results 2:
Year 3: Results 3: Year 4: 8/20/98 Results 4: S Open SSRs/DRs:
Comments on Current Status and Training Impact of Any Deficicncics:
Abslract Page 269
0 '
'Cg