ML18142A099: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(One intermediate revision by the same user not shown)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:( REVISIONS LTR ECO DESCRIPTION DATE APPROVED -------------041105  
{{#Wiki_filter:(
~ooii~1 o5oooiti *, pDR A -. ~--* F -----------...----------------------1 SIGNATURE DATE TITLE 1---------------------+----~
REVISIONS LTR         ECO                             DESCRIPTION                               DATE     APPROVED
AB295-Q2 Analog Board Assembly PROD TEST GI NEERING QUAL CONTROL VEC 304-11/80 -U1-a. ... (;;:_ tPrl.~ Acceptance Test Procedure r:./c:r / $"o NUMBER ATP445 SHEET 1 OF 7 8626 WILBUR AVENUE
                          -------041105
* NORTHRIDGE.
            ~ooii~1
CA 91324 * (213) 886-8488
            *,   pDR A -       .
* Telex No. 65*1303 REV AlidyNE ENQINEEIHNQ COIIPOIIATION 1.0 SCOPE This document defines the Acceptance Test Procedure (ATP) for the AB295-Q2 Analog Board assembly.
o5oooiti
This assembly includes 8 s*ub-assembly boards, VEC part number 9860-XX (the low pass frequency, -XX Hz. is to be in accordance with the Sales Order). The 9860-XX assemblies are to have been previously tested and accepted as ready for shipment.
  ~--*           F     -----------...----------------------1 SIGNATURE                           DATE     TITLE 1---------------------+----~
Any burn-in tests to be specified will be accomplished after completion of this ATP. Either the end item ATP or a special test procedure priate to a particular contract will define any additional test ments. 2.0 EQUIPMENT REQUIRED Table 1 lists the test equipment required to perform the ATP. Table 1 -E ui ment Re uired for ATP Part No. Decription Manufacturer or Model Alternate I AB295 Tester Power Supply (+/-15 VDC/0.lSA)
PROD TEST AB295-Q2 Analog Board Assembly Acceptance Test Procedure GI NEERING           ~ -U1-a....(;;:_           r:./c:r / $"o NUMBER                               REV ATP445 QUAL CONTROL        tPrl.~
Digital Multimeter 3.0 PRELIMINARY PROCEDURE Validyne Lambda Data Precision T-1087 LPD-422FM DP245, DP248 None Commerical Equivalent Commerical Equivalent 3.1 Inspect the AB295-Q2 assembly for accuracy and completeness of assembly.
SHEET     1     OF 7 8626 WILBUR AVENUE
* NORTHRIDGE. CA 91324 * (213) 886-8488
* Telex No. 65*1303 VEC 304-11/80
 
AlidyNE ENQINEEIHNQ COIIPOIIATION 1.0 SCOPE This document defines the Acceptance Test Procedure (ATP) for the AB295-Q2 Analog Board assembly. This assembly includes 8 s*ub-assembly boards, VEC part number 9860-XX (the low pass frequency, -XX Hz. is to be in accordance with the Sales Order). The 9860-XX assemblies are to have been previously tested and accepted as ready for shipment. Any burn-in tests to be specified will be accomplished after completion of this ATP. Either the end item ATP or a special test procedure appro-priate to a particular contract will define any additional test require-ments.
2.0 EQUIPMENT REQUIRED Table 1 lists the test equipment required to perform the ATP.
Table 1 - E ui ment Re uired for ATP Part No.
Decription I
Manufacturer                 or Model       Alternate AB295 Tester           Validyne                  T-1087            None Power Supply           Lambda                    LPD-422FM        Commerical
(+/-15 VDC/0.lSA)                                                     Equivalent Digital Multimeter     Data Precision             DP245, DP248     Commerical Equivalent 3.0 PRELIMINARY PROCEDURE 3.1 Inspect the AB295-Q2 assembly for accuracy and completeness of assembly.
Log the Low Pass Filter (Ass'y. 9860) serial numbers and positions in which they are installed on the data sheet. Verify retaining screws securely fasten each 9860 assembly in place on the AB295-Q2.
Log the Low Pass Filter (Ass'y. 9860) serial numbers and positions in which they are installed on the data sheet. Verify retaining screws securely fasten each 9860 assembly in place on the AB295-Q2.
4.0 INITIAL TEST SET-UP 4.1 With the +/-lSVDC power supply "OFF", connect the AB295-Q2 (UUT) to the AB295-Q2 tester. CAUTION: Always use caution to observe proper polarity of the mating connector and to turn off the power supply before connecting or ting the UUT to the tester. NUMBER ATP445 SHEET 2 OF 7 REV A(idyNE ENGINEERING CORPORATION 5.0 FUNCTIONAL TESTS Perform all tests and follow the sequence described.
4.0 INITIAL TEST SET-UP 4.1 With the +/-lSVDC power supply "OFF", connect the AB295-Q2 (UUT) to the AB295-Q2 tester.
Apply +/-15 VDC +/-3% power, with current limits of 150 to 300 mA. 5.1.1 On the AB295-Q2 tester press the RESET switch to obtain CHANNEL ADDRESS indication for QIAN 1. Place S3 in the #1 position.
CAUTION: Always use caution to observe proper polarity of the mating connector and to turn off the power supply before connecting or disconnec-ting the UUT to the tester.
Monitor the current test points 11+15V CURRENT" on the tester panel using the 100 mA DC current range of the digital multimeter.
NUMBER       ATP445             REV SHEET 2 OF 7
The indicated current shall not exceed 130 mA DC. 5.1.2 Monitor the current test points 11-15V CURRENT" on the tester front panel using the 100 mA DC current range of the digital multimeter.
 
The . cated current shall not exceed 110 mA DC. 5.2 Reference Voltage Adjustments 5.2.1 Monitor DC volts at TPl with respect to TP3 (ground) of the UUT. Adjust R2 (+9V ADJ) on UUT (the second potentiometer away from the card edge connector) to obtain +9.000 +/-0.005 VDC. 5.2.2 Monitor DC volts at TP2 with respect to TP3 (ground) of the UUT. Adjust RS (-9V ADJ) on UUT (the_first potentiometer, closest to the card edge connector) to obtain -9.000 +/-0.005 VDC. 5.3 +/-7V Reference 5.3.1 Measure DC volts at AB295-Q2 tester 11+15V CURRENT" -(minus) test point with respect to ground. (EA) 5.3.2 Measure DC volts at tester 11+7.5V 11 test point. (EB) 5.3.3 The voltage measured in 5.3.2 shall be (EB) = EA +/-0.025 voe. 5.3.4 M~asure the DC volts at AB295-Q2 tester 11-15V tURRENT" + (plus) test point with respect to ground. (EC) 5.3.5 Measure DC volts at tester 11-7.5V" test point. 5.3.6 The voltage measured in 5.3.5 shall be (E 0) = EC +/-0.025 VDC. 2 5.4 +12 voe Check Measure DC volts at UUT TPlO with respect to TP3 (ground).
A(idyNE ENGINEERING CORPORATION 5.0     FUNCTIONAL TESTS Perform all tests and follow the sequence described.               Apply +/-15 VDC +/-3%
The voltage shall be +12.0 +/-0.6 voe. NUMBER ATP445 SHEET 3 OF 7 REV 5.5 Analog Multiplexer Tests 5.5.1 Monitor the DC voltage difference between the "INPUT" and "OUTPUT" test points of the AB295-Q2 tester. (53 in position 1 gives +IOV at all even input channels and -IOV at all odd input channels.)
power, with current limits of 150 to 300 mA.
Press "RESET" to monitor the channel 1 input to output voltage ential. Press the "STEP" switch once to increment the measurement to channel 2, etc., until all 32 channels have been measured.
5.1.1   On the AB295-Q2 tester press the RESET switch to obtain CHANNEL ADDRESS indication for QIAN 1. Place S3 in the #1 position. Monitor the current test points 11 +15V CURRENT" on the tester panel using the 100 mA DC current range of the digital multimeter. The indicated current shall not exceed 130 mA DC.
At each position of the 32-channel multiplexer, the input to output differential voltage shall be 0.000 +/-0.020 voe. Also note that the "INPUT FAULT" indicator remains milit (at front panel of tester). 5.5.2 Repeat the tests described in 5.5.1, except place S3 in position 2 (which gives +lOV at all odd input channels and -lOV at all even input channels).
5.1.2 Monitor the current test points 11 -15V CURRENT" on the tester front panel using the 100 mA DC current range of the digital multimeter. The indi-
At each position of the 32-channel multiplexer, the input to output differential voltage shall be 0.000 +/-0.020 voe. Also note that the "INPUT FAULT" indicator remains milit (at the front panel of tester). 5.5.3 After completion of above tests, remove power and disconnect UUT from tester. Complete data*entries in TEST REPORT forms and indicate acceptance or note deficiencies.
      . cated current shall not exceed 110 mA DC.
NUMBER ATP445 SHEET 4 OF 7 REV
5.2     Reference Voltage Adjustments 5.2.1 Monitor DC volts at TPl with respect to TP3 (ground) of the UUT. Adjust R2 (+9V ADJ) on UUT (the second potentiometer away from the card edge connector) to obtain +9.000 +/-0.005 VDC.
( S/0 W/0 Paragraph/Step ASSY TEST REPORT AB295-Q2 ANALOG BOARD ASSEMBLY CUSTOMER SERIAL NO. Accepted Specification 3.1 Visual Inspection Ass'y accurate and complete.
5.2.2 Monitor DC volts at TP2 with respect to TP3 (ground) of the UUT. Adjust RS (-9V ADJ) on UUT (the_first potentiometer, closest to the card edge connector) to obtain -9.000 +/-0.005 VDC.
Screws tight. POSITION Ch 1-4 Ch 5-8 Ch 9-12 Ch 13-16 5 .1.1 +15V CURRENT 5 .1. 2 -15V CURRENT 5.2.1 * +9V ADJUST 5.2.2 -9V ADJUST 5.3.1 E = A 5.3.2 E = B 5.3.3 E = A 2 5.3.4 EC = 5.3.5 ED = 5.3.6 EC = 2 5.4 +12 VDC check 9860 S/N POS 9860 S/N 17-20 21-24 25-28 29-32 VDC VDCJ VDC VDC VDCJ VDC NUMBER ATP445 130 mA DC Max. 110 mA DC Max. -+9.000 +/-.005 VDC -9.000 +/-.005 VDC ED= EC +/-0.025 2 VDC +12.0 +/-0.6 VDC REV SHEET 5 OF 7 8626 WILBl.JR AVENI.LE *~~ORJHRIDGE CA 91324
5.3     +/-7V Reference 5.3.1 Measure DC volts at AB295-Q2 tester         11
                                                      +15V CURRENT" - (minus) test point with respect to ground.                         (EA) 5.3.2 Measure DC volts at tester     11
                                        +7.5V 11 test point.                         (EB) 5.3.3 The voltage measured in 5.3.2 shall be (EB) = EA                 +/-0.025 voe.
5.3.4 M~asure the DC volts at AB295-Q2 tester             11
                                                            -15V tURRENT" + (plus) test point with respect to ground.                               (EC) 5.3.5 Measure DC volts at tester     11
                                        -7.5V" test point.
5.3.6 The voltage measured in 5.3.5 shall be (E0 ) = EC +/-0.025 VDC.
2 5.4     +12 voe Check Measure DC volts at UUT TPlO with respect to TP3 (ground).               The voltage shall be +12.0 +/-0.6 voe.
NUMBER                             REV ATP445 SHEET 3     OF 7
 
5.5   Analog Multiplexer Tests 5.5.1 Monitor the DC voltage difference between the "INPUT" and "OUTPUT" test points of the AB295-Q2 tester. (53 in position 1 gives +IOV at all even input channels and -IOV at all odd input channels.)
Press "RESET" to monitor the channel 1 input to output voltage differ-ential. Press the "STEP" switch once to increment the measurement to channel 2, etc., until all 32 channels have been measured.
At each position of the 32-channel multiplexer, the input to output differential voltage shall be 0.000 +/-0.020 voe. Also note that the "INPUT FAULT" indicator remains milit (at front panel of tester).
5.5.2 Repeat the tests described in 5.5.1, except place S3 in position 2 (which gives +lOV at all odd input channels and -lOV at all even input channels).
At each position of the 32-channel multiplexer, the input to output differential voltage shall be 0.000 +/-0.020 voe. Also note that the "INPUT FAULT" indicator remains milit (at the front panel of tester).
5.5.3 After completion of above tests, remove power and disconnect UUT from tester. Complete data*entries in TEST REPORT forms and indicate acceptance or note deficiencies.
NUMBER                           REV ATP445 SHEET   4 OF 7
 
(                                                       TEST REPORT AB295-Q2 ASSY    ANALOG BOARD ASSEMBLY S/0                                                  CUSTOMER W/0                                                  SERIAL NO.
Paragraph/Step                                                  Accepted               Specification 3.1     Visual Inspection                                                             Ass'y accurate and complete.
POSITION          9860 S/N          POS        9860 S/N Screws tight.
Ch 1-4                           17-20 Ch 5-8                           21-24 Ch 9-12                           25-28 Ch 13-16                         29-32 5 .1.1 +15V CURRENT                                                                 130 mA DC Max.
5 .1. 2 -15V CURRENT                                                                 110 mA DC Max.
5.2.1 * +9V ADJUST
                                                                                        +9.000
                                                                                        +/-.005 VDC 5.2.2   -9V ADJUST                                                                   -9.000
                                                                                        +/-.005 VDC 5.3.1   E =                     VDC A
5.3.2   E =
B VDCJ VDC 5.3.3   EA =
2 5.3.4   EC =                   VDC 5.3.5   ED =                     VDCJ 5.3.6   EC =                     VDC                                                 ED= EC +/-0.025 VDC 2                                                                                   2 5.4    +12 VDC check                                                                  +12.0 +/-0.6 VDC NUMBER                                  REV ATP445 SHEET 5       OF 7 8626 WILBl.JR AVENI.LE *~~ORJHRIDGE CA 91324
* 12131 886-8488 *~elexNo 65-1303
* 12131 886-8488 *~elexNo 65-1303
( \ ( TEST REPORT AB295-Q2 ASSY ANALOG BOARD ASSEMRT;Y S/0 W/0 Paragraph/Step 5.5.1 Multiplexer Differential Voltage (+lOV@ EVEN, -lOV@ ODD) INPUT FAULT INDICATOR Chl 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 CUSTOMER SERIAL NO.** ---------* Accepted Specification Unlit 0.00 +/-0.02 VDC 0.00 +/-0.02 VDC NUMBER REV ATP445 SHEET 6 OF 7 8626 WILBUR AVENUE
 
* NORTHRIDGE.
(
CA 91324 * (213) 886-8488
\                                                   TEST REPORT AB295-Q2 ASSY   ANALOG BOARD ASSEMRT;Y S/0                                             CUSTOMER W/0                                             SERIAL NO.** - - - - - - - - -
Paragraph/Step
* Accepted                  Specification 5.5.1 Multiplexer Differential Voltage (+lOV@ EVEN, -lOV@ ODD)
INPUT FAULT INDICATOR                                                         Unlit Chl                                                                 0.00 +/-0.02 VDC 2
3 4
5 6
7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32                                                                 0.00 +/-0.02 VDC
(
NUMBER                                       REV ATP445 SHEET 6           OF 7 8626 WILBUR AVENUE
* NORTHRIDGE. CA 91324 * (213) 886-8488
* Telex NC)_. 6ji_~03 __ _
* Telex NC)_. 6ji_~03 __ _
AlidyNE l!NGINl!IHUNG COllfOOIIATION TEST REPORT AB295-Q2 ASSY ANALPG BQABP ASSEMBLY S/0 W/0 Paragraph/Step 5.5.2 Multiplexer Differential Voltage (-lOV@ EVEN, +lOV@ ODD) INPUT FAULT INDICATOR Chl 2 3 .4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 CUSTOMER SERIAL NO. Accepted NUMBER ATP445 Specification Unlit 0.00 +/-0.02 VDC 0.00 +/-0.02 VDC REV SHEET 7 OF 7}}
 
AlidyNE l!NGINl!IHUNG COllfOOIIATION TEST REPORT AB295-Q2 ASSY     ANALPG BQABP ASSEMBLY S/0                                               CUSTOMER W/0                                               SERIAL NO.
Paragraph/Step                                             Accepted          Specification 5.5.2 Multiplexer Differential Voltage (-lOV@ EVEN, +lOV@ ODD)
INPUT FAULT INDICATOR                                               Unlit Chl                                                   0.00 +/-0.02 VDC 2
3
                        .4 5
6 7
8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32                                                     0.00 +/-0.02 VDC NUMBER        ATP445            REV SHEET 7     OF 7}}

Latest revision as of 00:44, 3 February 2020

Acceptance Test Procedure ATP445, AB295-Q2 Analog Board Assembly.
ML18142A099
Person / Time
Site: Surry, 05000000
Issue date: 12/10/1980
From:
VALIDYNE ENGINEERING SALES CORP.
To:
Shared Package
ML18130A405 List:
References
ATP445, NUDOCS 8411200411
Download: ML18142A099 (7)
v • d • e


Text

(

REVISIONS LTR ECO DESCRIPTION DATE APPROVED

041105

~ooii~1

  • , pDR A - .

o5oooiti

~--* F -----------...----------------------1 SIGNATURE DATE TITLE 1---------------------+----~

PROD TEST AB295-Q2 Analog Board Assembly Acceptance Test Procedure GI NEERING ~ -U1-a....(;;:_ r:./c:r / $"o NUMBER REV ATP445 QUAL CONTROL tPrl.~

SHEET 1 OF 7 8626 WILBUR AVENUE

  • NORTHRIDGE. CA 91324 * (213) 886-8488
  • Telex No. 65*1303 VEC 304-11/80

AlidyNE ENQINEEIHNQ COIIPOIIATION 1.0 SCOPE This document defines the Acceptance Test Procedure (ATP) for the AB295-Q2 Analog Board assembly. This assembly includes 8 s*ub-assembly boards, VEC part number 9860-XX (the low pass frequency, -XX Hz. is to be in accordance with the Sales Order). The 9860-XX assemblies are to have been previously tested and accepted as ready for shipment. Any burn-in tests to be specified will be accomplished after completion of this ATP. Either the end item ATP or a special test procedure appro-priate to a particular contract will define any additional test require-ments.

2.0 EQUIPMENT REQUIRED Table 1 lists the test equipment required to perform the ATP.

Table 1 - E ui ment Re uired for ATP Part No.

Decription I

Manufacturer or Model Alternate AB295 Tester Validyne T-1087 None Power Supply Lambda LPD-422FM Commerical

(+/-15 VDC/0.lSA) Equivalent Digital Multimeter Data Precision DP245, DP248 Commerical Equivalent 3.0 PRELIMINARY PROCEDURE 3.1 Inspect the AB295-Q2 assembly for accuracy and completeness of assembly.

Log the Low Pass Filter (Ass'y. 9860) serial numbers and positions in which they are installed on the data sheet. Verify retaining screws securely fasten each 9860 assembly in place on the AB295-Q2.

4.0 INITIAL TEST SET-UP 4.1 With the +/-lSVDC power supply "OFF", connect the AB295-Q2 (UUT) to the AB295-Q2 tester.

CAUTION: Always use caution to observe proper polarity of the mating connector and to turn off the power supply before connecting or disconnec-ting the UUT to the tester.

NUMBER ATP445 REV SHEET 2 OF 7

A(idyNE ENGINEERING CORPORATION 5.0 FUNCTIONAL TESTS Perform all tests and follow the sequence described. Apply +/-15 VDC +/-3%

power, with current limits of 150 to 300 mA.

5.1.1 On the AB295-Q2 tester press the RESET switch to obtain CHANNEL ADDRESS indication for QIAN 1. Place S3 in the #1 position. Monitor the current test points 11 +15V CURRENT" on the tester panel using the 100 mA DC current range of the digital multimeter. The indicated current shall not exceed 130 mA DC.

5.1.2 Monitor the current test points 11 -15V CURRENT" on the tester front panel using the 100 mA DC current range of the digital multimeter. The indi-

. cated current shall not exceed 110 mA DC.

5.2 Reference Voltage Adjustments 5.2.1 Monitor DC volts at TPl with respect to TP3 (ground) of the UUT. Adjust R2 (+9V ADJ) on UUT (the second potentiometer away from the card edge connector) to obtain +9.000 +/-0.005 VDC.

5.2.2 Monitor DC volts at TP2 with respect to TP3 (ground) of the UUT. Adjust RS (-9V ADJ) on UUT (the_first potentiometer, closest to the card edge connector) to obtain -9.000 +/-0.005 VDC.

5.3 +/-7V Reference 5.3.1 Measure DC volts at AB295-Q2 tester 11

+15V CURRENT" - (minus) test point with respect to ground. (EA) 5.3.2 Measure DC volts at tester 11

+7.5V 11 test point. (EB) 5.3.3 The voltage measured in 5.3.2 shall be (EB) = EA +/-0.025 voe.

5.3.4 M~asure the DC volts at AB295-Q2 tester 11

-15V tURRENT" + (plus) test point with respect to ground. (EC) 5.3.5 Measure DC volts at tester 11

-7.5V" test point.

5.3.6 The voltage measured in 5.3.5 shall be (E0 ) = EC +/-0.025 VDC.

2 5.4 +12 voe Check Measure DC volts at UUT TPlO with respect to TP3 (ground). The voltage shall be +12.0 +/-0.6 voe.

NUMBER REV ATP445 SHEET 3 OF 7

5.5 Analog Multiplexer Tests 5.5.1 Monitor the DC voltage difference between the "INPUT" and "OUTPUT" test points of the AB295-Q2 tester. (53 in position 1 gives +IOV at all even input channels and -IOV at all odd input channels.)

Press "RESET" to monitor the channel 1 input to output voltage differ-ential. Press the "STEP" switch once to increment the measurement to channel 2, etc., until all 32 channels have been measured.

At each position of the 32-channel multiplexer, the input to output differential voltage shall be 0.000 +/-0.020 voe. Also note that the "INPUT FAULT" indicator remains milit (at front panel of tester).

5.5.2 Repeat the tests described in 5.5.1, except place S3 in position 2 (which gives +lOV at all odd input channels and -lOV at all even input channels).

At each position of the 32-channel multiplexer, the input to output differential voltage shall be 0.000 +/-0.020 voe. Also note that the "INPUT FAULT" indicator remains milit (at the front panel of tester).

5.5.3 After completion of above tests, remove power and disconnect UUT from tester. Complete data*entries in TEST REPORT forms and indicate acceptance or note deficiencies.

NUMBER REV ATP445 SHEET 4 OF 7

( TEST REPORT AB295-Q2 ASSY ANALOG BOARD ASSEMBLY S/0 CUSTOMER W/0 SERIAL NO.

Paragraph/Step Accepted Specification 3.1 Visual Inspection Ass'y accurate and complete.

POSITION 9860 S/N POS 9860 S/N Screws tight.

Ch 1-4 17-20 Ch 5-8 21-24 Ch 9-12 25-28 Ch 13-16 29-32 5 .1.1 +15V CURRENT 130 mA DC Max.

5 .1. 2 -15V CURRENT 110 mA DC Max.

5.2.1 * +9V ADJUST

+9.000

+/-.005 VDC 5.2.2 -9V ADJUST -9.000

+/-.005 VDC 5.3.1 E = VDC A

5.3.2 E =

B VDCJ VDC 5.3.3 EA =

2 5.3.4 EC = VDC 5.3.5 ED = VDCJ 5.3.6 EC = VDC ED= EC +/-0.025 VDC 2 2 5.4 +12 VDC check +12.0 +/-0.6 VDC NUMBER REV ATP445 SHEET 5 OF 7 8626 WILBl.JR AVENI.LE *~~ORJHRIDGE CA 91324

  • 12131 886-8488 *~elexNo 65-1303

(

\ TEST REPORT AB295-Q2 ASSY ANALOG BOARD ASSEMRT;Y S/0 CUSTOMER W/0 SERIAL NO.** - - - - - - - - -

Paragraph/Step

  • Accepted Specification 5.5.1 Multiplexer Differential Voltage (+lOV@ EVEN, -lOV@ ODD)

INPUT FAULT INDICATOR Unlit Chl 0.00 +/-0.02 VDC 2

3 4

5 6

7 8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 0.00 +/-0.02 VDC

(

NUMBER REV ATP445 SHEET 6 OF 7 8626 WILBUR AVENUE

  • NORTHRIDGE. CA 91324 * (213) 886-8488
  • Telex NC)_. 6ji_~03 __ _

AlidyNE l!NGINl!IHUNG COllfOOIIATION TEST REPORT AB295-Q2 ASSY ANALPG BQABP ASSEMBLY S/0 CUSTOMER W/0 SERIAL NO.

Paragraph/Step Accepted Specification 5.5.2 Multiplexer Differential Voltage (-lOV@ EVEN, +lOV@ ODD)

INPUT FAULT INDICATOR Unlit Chl 0.00 +/-0.02 VDC 2

3

.4 5

6 7

8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 0.00 +/-0.02 VDC NUMBER ATP445 REV SHEET 7 OF 7

Retrieved from "https://kanterella.com/w/index.php?title=ML18142A099&oldid=2404676"