ML17173A298: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 2: | Line 2: | ||
| number = ML17173A298 | | number = ML17173A298 | ||
| issue date = 06/21/2017 | | issue date = 06/21/2017 | ||
| title = | | title = Supplement to Response to Request for Additional Information Related to License Amendment Request to Adopt Emergency Action Level Scheme Pursuant to NEI 99-01 Revision 6 | ||
| author name = Hettel W G | | author name = Hettel W G | ||
| author affiliation = Energy Northwest | | author affiliation = Energy Northwest |
Revision as of 14:55, 2 April 2019
ML17173A298 | |
Person / Time | |
---|---|
Site: | Columbia |
Issue date: | 06/21/2017 |
From: | Hettel W G Energy Northwest |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
CAC MF8219, GO2-17-119 | |
Download: ML17173A298 (211) | |
Text
ENERGY NORTHWEST W.Grover Hettel Columbia Generating Station P.O. Box968, PE023 Richland, WA 99352-0968 Ph. 509.377.8311 IF. 509.377.4150 wghettel@energy-northwest.com June 21, 2017 G02-17-119 10CFR 50.90 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001
Subject:
COLUMBIA GENERATING STATION, DOCKET NO. 50-397 SUPPLEMENT TO RESPONSE TO REQUEST FOR ADDITIONAL INFORMATION RELATED TO LICENSE AMENDMENT REQUEST TO ADOPT EMERGENCY ACTION LEVEL SCHEME PURSUANT TO NEI 99-01 REVISION 6 (MF8219)
References:
- 1. Letter from W. Hettel, Energy Northwest to NRC, "Request for Amendment to Emergency Plan," (ADAMS Accession Number ML 1621 OA528), dated July 28, 2016. 2. Email from J. Klos, NRC, to R. Garcia, Energy Northwest, "Columbia EAL Scheme Change, MF8219, Request for Additional Information," (ADAMS Accession Number ML17025A061), dated January 25, 2017. 3. Letter from W. Hettel, Energy Northwest to NRC, "Response to Request for Additional Information Related to License Amendment Request to Adopt Emergency Action Level Scheme Pursuant to NEI 99-01 Revision 6 (MF8219)," (ADAMS Accession Number ML 17054D781
), dated February 23, 2017.
Dear Sir or Madam:
By Reference 1 , Energy Northwest submitted a license amendment request for Columbia Generating Station (Columbia).
The amendment proposes to revise the current Emergency Action Level (EAL) scheme to one based upon Revision 6 to the Nuclear Energy Institute (NEI) document NEI 99-01, "Development of Emergency Action Levels for Non-Passive Reactors" (ADAMS Accession Number ML 12326A805).
By Reference 2, the Nuclear Regulatory Commission (NRC) requested additional information related to the Energy Northwest submittal, and Energy Northwest provided responses (Reference 3). This submittal replaces in total the responses to RAI Requests Nos. 3.a and 6 previously provided in Reference 3 to address additional technical concerns raised by your staff specific to those RAI responses.
G02-17-119 Page 2 of 2 Enclosure 1 to this letter contains the supplemental information, while Enclosure 2 provides an updated technical bases document.
No new commitments are being made by this letter or the enclosures.
Additionally, the No Significant Hazards Consideration determination in the original submittal is not altered by the additional information provided in this response.
If there are any questions or if additional information is needed, please contact Ms. L. L. Williams, Licensing Supervisor, at 509-377-8148.
I declare under penalty of perjury that the foregoing is true and correct. Executed this 02 I!.< day of June, 2017. Respectfully, W.G. Hettel Vice President, Operations
Enclosures:
- 1. Supplement to Response to Request for Additional Information
- 2. Updated Technical Basis Document cc: NRC Region IV Administrator NRC NRA Project Manager NRC Senior Resident lnspector/988C NRC NRA Division of Policy and Rulemaking (DPR) Director NRC NRA Plant Licensing Branch Chief CD Sonoda-BPA/1399 WA Horin -Winston & Strawn RR Cowley-WDOH (email) EFSECutc.wa.gov--
EFSEC (email)
G02-17-119 Enclosure 1 Page 1 of 4 SUPPLEMENT TO RESPONSE TO REQUEST FOR ADDITIONAL INFORMATION NRC REQUEST No. 3a: Concerning the proposed Table 3, "Effluent Monitor Classification Thresholds," as it relates to RU1 .1, please address the following:
- a. The proposed turbine building exhaust (TEA-RIS-13) value in Table 3 for an Unusual Event is 1.02E-04 µCi/cc and the proposed value for an Alert is 8.35E-04 µCi/cc. The proposed radwaste building exhaust (WEA-RIS-14) value in Table 3 for an Unusual Event is 1.98E-03 µCi/cc and the proposed value for an Alert is 3.45E-03 µCi/cc. The actual dose that corresponds to an Unusual Event, as indicated on page 5.015 of Enclosure 2, ADAMS Accession No. ML 1621 OA530, is 6 mrem/hr thyroid for TEA-RIS-13 and 29 mrem/hr thyroid for WEA-RIS-14.
The NRC staff reviews proposed EALs for consistency, human factors engineering and user friendliness, and to ensure that the potential for emergency classification upgrade only when there is an increasing threat to public health and safety. The above values for the declaration of an Unusual Event and an Alert based on RIS-14 indications are less than a factor of two apart. Additionally, an Unusual Event declaration based on TEA-RIS-13 would correspond to 6 mrem/hr, and an Unusual Event declaration based on WEA-RIS-14 would correspond to 29 mrem/hr. Both instruments indicate that the basis for the setpoint is 2 times the Offsite Dose Calculation Manual limit. Please revise the Table 3 Unusual Event setpoint for WEA-RIS-14 to reflect a similar threat to public health and safety as TEA-RIS-13. Additionally, please revise the Table 3 Unusual Event setpoint as necessary to provide a more appropriate difference between an Unusual Event and an Alert condition or provide a more detailed explanation for the proposed Unusual Event setpoints for WEA-RIS-14.
ENERGY NORTHWEST'S RESPONSE TO RAI No. 3a: This information replaces in total the response to RAI No. 3a previously subm i tted. Energy Northwest will use the methodology for Unusual Event (UE) as two times the Offsite Dose Calculation Manual (ODCM) limit defined in Nuclear Energy Institute (NEI) document NEI 99-01 in the radiological calculation, NE-02-09-12, to update the Table 3 UE values for gaseous releases from the Reactor Building, Turbine Building, and Radwaste Building.
Liquid release thresholds for UE as well as all thresholds for Alert, Site Area Emergency, and General Emergency remain unchanged from the original subm i ttal. Table 3 below replaces all previously submitted versions of the Effluent Monitor Classification Thresholds table. The new version of Table 3 is reflected in the updated EAL bases document (Enclosure 2).
G02-17-119 Enclosure 1 Page 2 of 4 The values shown in Table 3, column "UE", are consistent with the NEI 99-01 methodology and establish UE thresholds equal to two times the ODCM release limits. The revised UE values for TEA-RIS-13 and WEA-RIS-14 are approximately one order of magnitude below the Alert values. Both the TEA-RIS-13 and WEA-RIS-14 thresholds represent a comparable threat to public health and safety in that they are set to be twice the ODCM limits. Table 3 Effluent Monitor Classification Thresholds Release Point Monitor General SAE Alert UE PRM-RE-18 (I) ------------3.00E+03 cps ti) Reactor Building Exhaust ::I PRM-RE-1C (H) 2.00E+04 cps 2.00E+03 cps 4.00E+02 cps ----0 Cl) ti) Turbine Building Exhaust TEA-RIS-13 8.35E-02 µCi/cc 8.35E-03 µCi/cc 8.35E-04 µCi/cc 4.22E-05 µCi/cc ca Radwaste Building WEA-RIS-14 3.45E-01 µCi/cc 3.45E-02 µCi/cc 3.45E-03 µCi/cc 3.98E-04 µCi/cc Exhaust Radwaste Effluent FDR-RIS-606
2 X HI-HI alarm :2 TSW Effluent TSW-RIS-5
3.00E-05 uCi/cc ::I .2" Service Water Process A SW-RIS-604 1.00E+02 cps ..J Service Water Process B SW-RIS-605
1.00E+02 cps NRC REQUEST No. 6: The fourth paragraph of the proposed Columbia CA6.1 and MAS.1 basis discussion states: An emergency classification is required if a FIRE or EXPLOSION caused by an equipment failure damages safety system equipment that was otherwise functional or operable (i.e., equipment that was not the source/location of the failure).
For example, if a FIRE or EXPLOSION resulting from the failure of a piece of safety system equipment causes damage to the other train of the affected safety system or another safety system, then an emergency declaration is required in accordance with this IC and EAL. The example provided in the above paragraph requires two trains of equipment to be damaged. The first train would be potentially damaged by the fire or explosion, and the second train would be damaged by the piece of safety system equipment that was on fire or exploded.
It is not the intent of CA6 and MAS to require two trains of equipment to be damaged by an explosion or fire as declaration criteria.
Please remove the provided example from the fourth paragraph of the CA6 and MAS, or explain how this example will not potentially cause a decision maker to infer that two trains of equipment must be damaged to meet the threshold value for declaration of CA6 or MAS.
G02-17-119 Enclosure 1 Page 3 of 4 ENERGY NORTHWEST'S RESPONSE TO RAI 6: This information replaces in total the response to RAI No. 6 previously submitted.
Energy Northwest has deleted the fourth paragraph of Columbia's bases for CA6.1 and MAB.1, as well as the associated fifth paragraph.
To ensure that CA6 and MAB are declared as intended by the NEI 99-01, Revision 6 scheme, Energy Northwest will modify the definition of VISIBLE DAMAGE and revise CA6 and MAB. The proposed revisions represent a deviation from NEI 99-01 Revision 6 guidance that has been determined to be acceptable as noted below. (NOTE: capitalized terms represent defined terms per the new EAL scheme.) The definition of VISIBLE DAMAGE is being rewritten to read as follows:
- Damage to a SAFETY SYSTEM train that is readily observable without measurements, testing, or analysis.
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected SAFETY SYSTEM train. The revised definition for VISIBLE DAMAGE is appropriate since it is only used for EALs CA6 and MAB within the proposed scheme, and it more clearly delineates the EAL focus on safety system trains rather than individual components or structures.
A note is added to the CA6.1 and MAB.1 bases stating:
- If the affected SAFETY SYSTEM train (or component) was already inoperable or out of service before the event occurred, then this emergency classification is not warranted as long as the damage is limited to the affected SAFETY SYSTEM train (or component).
This note represents an acceptable deviation in that it meets the intent of the EALs. Additionally, it is consistent with other EALs within the scheme and ensures emergencies are declared based upon unplanned events that may post a radiological risk to the public. An additional note is added to the CA6.1 and MAB.1 bases stating:
- If the event results in VISIBLE DAMAGE, with no indications of degraded performance to any SAFETY SYSTEM train, then this emergency declaration is not warranted.
This note also represents an acceptable deviation as it effectively summarizes detailed information contained in the associated bases section related to when conditions would require declaration of an Alert.
G02-17-119 Enclosure 1 Page 4 of 4 Additional conforming wording changes have been made to Initiating Conditions CA6.1 and MA8.1, and their associated bases discussions (depicted in Enclosure 2). These changes to IC and bases represent an acceptable deviation in that they ensure the EAL is appropriately focused on the underlying intent of when Alert declarations are required per this EAL. In total the revised Initiating Conditions and associated bases discussion, definition, and additional notes represent an acceptable deviation in that it ensures that escalations from an UE to an Alert, due to a hazardous event, are appropriately made. The deviations are consistent with the intent of the EALs in requiring an Alert declaration when the following conditions are met: 1. A hazardous event has occurred;
- 2. One SAFETY SYSTEM train is having performance issues as a result of the hazardous event; and 3. Either the second SAFETY SYSTEM train is having performance issues or the visible damage is enough to be concerned that the second SAFETY SYSTEM train may have operability or reliability issues. The aforementioned changes are reflected in the enclosed EAL Bases document (Enclosure 2).
G02-17-119 Enclosure 2 Updated Technical Basis Document Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 1 of 203 PLANT PROCEDURES MANUAL PCN#: N/A *13.1.lA*
Effect i ve Date: 13.1.1A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 2 of 203 TABLE OF CONTENTS SECTION 1.0 PURPOSE ..............................................................................................................................
4 DISCUSSION
.........................................................................................................................
4 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 Background
.........................................................................................................................
4 Fission Product Barriers ......................................................................................................
5 Emergency Classification Based on Fission Product Barrier Degradation
.........................
5 EAL Organization
................................................................................................................
6 Technical Bases Information
...............................................................................................
8 Mode Applicability
...............................................................................................................
8 Definitions
...........................................................................................................................
8 Basis ...................................................................................................................................
9 CGS Basis Reference(s)
.....................................................................................................
9 Operating Mode Applicability (ref. 4.1.2) .............................................................................
9 Storage Operations
.............................................................................................................
9 3.0 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS
...........................................
10 3.1 General Considerations
.............................................
.......................................................
10 3.2 Classification Methodology
...............................................................................................
11
4.0 REFERENCES
.....................................................................................................................
14 4.1 Developmental
..................................................................................................................
14 4.2 Implementing
....................................................................................................................
14 5.0 DEFINITIONS, ACRONYMS & ABBREVIATIONS
..............................................................
15 5.1 Definitions
.........................................................................................................................
15 5.2 Abbreviations/Acronyms
...................................................................................................
19 6.0 CGS-TO-NEI 99-01 Rev. 6 EAL CROSS-REFERENCE
.....................................................
23 7.0 ATTACHMENTS
..................................................................................................................
26 7.1 Emergency Action Level Technical Bases ........................................................................
26 7 .2 Fission Product Barrier Matrix and Bases .........................................................................
26 7.3 Notes and Tables ..............................................................................................................
27 7.4 Safe Operation
& Shutdown Areas Table 9 Bases ...........................................................
26 7.5 Columbia Generating Station Emergency Classification Chart Distribution
......................
26 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 3 of 203 1 Emergency Action Level Technical Bases .....................................................................
27 Category R Abnormal Rad Release I Rad Effluent..
..........................................
27 Category C Cold Shutdown I Refuel System Malfunction
..................................
51 Category H Category M Category E Category F Hazards ...........................................................................................
79 System Malfunction
.......................................................................
103 ISFSI .............................................................................................
132 Fission Product Barrier Degradation
.............................................
135 2 Fission Product Barrier Matrix and Bases ...................................................................
142 3 Notes and Tables .........................................................................................................
189 4 Safe Operation
& Shutdown Areas Table 9 Bases ......................................................
195 5 Columbia Generating Station Emergency Classification Chart Distribution
................
199 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 4 of 203 1.0 PURPOSE This document provides an explanation and rationale for each Emergency Action Level (EAL) included in the EAL Upgrade Project for Columbia Generating Station (CGS). It should be used to provide historical documentation for future reference and serve as a training aid. Decision-makers responsible for implementation of PPM 13.1.1, Classifying the Emergency, may (though not required) use this document as a technical reference in support of EAL interpretation.
The expectation is that emergency classifications are to be made as soon as conditions are present and recognizable for the classification, but within 15 minutes or less in all cases of conditions present. Use of this document for assistance is not intended to delay the emergency classification.
Because the information in a basis document can affect emergency classification making (e.g., the Emergency Director refers to it during an event), the NRC staff expects that changes to the basis document will be evaluated in accordance with the provisions of 10 CFR 50.54(q).
Additionally, some criteria/values in the CGS EALs and fission product barrier thresholds are drawn from plant AOPs and EOPs. The impact of any changes to those procedures on EAL bases must be evaluated for screening in accordance with the provisions of 10 CFR 50.54(q).
This Emergency Plan Implementing Procedure as identified by reference in the Emergency Plan. Changes to the EAL Scheme (Attachments 7.1, 7.2, 7.3, 7.4) require an LDCN since it is part of the Emergency Plan. 2.0 DISCUSSION
2.1 Background
2.1.1 EALs are the plant-specific indications, conditions or instrument readings that are utilized to classify emergency conditions defined in the CGS Emergency Plan. 2.1.2 In 1992, the NRG endorsed NUMARC/NESP-007 "Methodology for Development of Emergency Action Levels" as an alternative to NUREG-0654 EAL guidance.
2.1.3 NEI 99-01 (NUMARC/NESP-007)
Revisions 4 and 5 were subsequently issued for industry implementation.
Enhancements over earlier revisions included:
- Consolidating the system malfunction initiating conditions and example emergency action levels which address conditions that may be postulated to occur during plant shutdown conditions.
- Initiating conditions and example emergency action levels that fully address conditions that may be postulated to occur at permanently Defueled Stations and Independent Spent Fuel Storage Installations (ISFSls).
- Simplifying the fission product barrier EAL threshold for a Site Area Emergency.
2.1.4 Subsequently, Revision 6 of NEI 99-01 has been issued which incorporates resolutions to numerous implementation issues including the NRC EAL Frequently Asked Questions (FAQs). Using NEI 99-01 Revision 6, "Methodology for the Development of Emergency Action Levels for Non-Passive Reactors," November Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 5 of 203 2012 (ADAMS Accession Number ML 12326A805) (ref. 4.1.1 ), CGS conducted an EAL implementation upgrade project that produced the EALs discussed herein. 2.2 Fission Product Barriers Fission product barrier thresholds represent threats to the defense in depth design concept that precludes the release of radioactive fission products to the environment.
This concept relies on multiple physical barriers, any one of which, if maintained intact, precludes the release of significant amounts of radioactive fission products to the environment.
Many of the EALs derived from the NEI methodology are fission product barrier threshold based. That is, the conditions that define the EALs are based upon thresholds that represent the loss or potential loss of one or more of the three fission product barriers. "Loss" and "Potential Loss" signify the relative damage and threat of damage to the barrier. A "Loss" threshold means the barrier no longer assures containment of radioactive materials.
A "Potential Loss" threshold implies an increased probability of barrier loss and decreased certainty of maintaining the barrier. 2.2.1 The primary fission product barriers are: a. Fuel Clad CFC): The Fuel Clad Barrier consists of the cladding material that contains the fuel pellets. b. Reactor Coolant System (RCS): The RCS Barrier is the reactor coolant system pressure boundary and includes the RPV and all reactor coolant system piping out to and including the isolation valves. c. Containment (PC): The drywell, the wetwell, their respective interconnecting paths, and other connections up to and including the outermost containment isolation valves comprise the PC barrier. Containment Barrier thresholds are used as criteria for escalation of the ECL from Alert to either a Site Area Emergency or a General Emergency using the Fission Product Barrier table. 2.3 Emeraency Classification Based on Fission Product Barrier Degradation The following criteria are the bases for event classification related to fission product barrier loss or potential loss: 2.3.1 Alert: Any loss or any potential loss of either Fuel Clad or RCS barrier 2.3.2 Site Area Emergency:
Loss or potential loss of any two barriers 2.3.3 General Emergency:
Loss of any two barriers and loss or potential loss of the third barrier Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 6 of 203 2.4 EAL Organization 2.4.1 The CGS EAL scheme includes the following features:
- a. Division of the EAL set into three broad groups: 1) EALs applicable under all plant operating modes -This group would be reviewed by the EAL-user any t i me emergency classification is considered.
- 2) EALs applicable only under hot operating modes -This group would only be reviewed by the EAL-user when the plant is in Hot Shutdown, Startup, or Power Operations mode. 3) EALs applicable only under cold operating modes -This group would only be reviewed by the EAL-user when the plant is in Cold Shutdown, Refuel or Defueled mode. 2.4.2 The purpose of the groups is to avoid review of hot condition EALs when the plant is in a cold condition and avoid review of cold condition EALs when the plant is in a hot condition. This approach significantly minimizes the total number of EALs that must be reviewed by the EAL-user for a given plant condition, reduces EAL-user reading burden and, thereby, speeds identification of the EAL that applies to the emergency.
2.4.3 Within
each group, assignment of EALs to categories and subcategories:
2.4.4 Category
and subcategory titles are selected to represent conditions that are operationally significant to the EAL-user.
The CGS EAL categories are aligned to and represent the NEI 99-01"Recognition Categories." Subcategories are used in the CGS scheme as necessary to further divide the EALs of a category into logical sets of possible emergency classification thresholds.
The CGS EAL categories and subcategories are listed in Table 2.4-1. 2.4.5 The primary tool for determining the emergency classification level is the EAL Classification Matrix. The user of the EAL Classification Matrix may (but is not required to) consult the EAL bases in order to obtain additional information concerning the EALs under classification consideration.
The user should consult Section 3.0 and Attachments 7.1 & 7.2 of this document for such information.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 7 of 203 Table 2.4-1 EAL Groups, Categories and Subcategories EAL Group/Category Any Operating Mode: R -Abnormal Rad Release I Rad Effluent H -Hazards and Other Conditions Affecting Plant Safety E -Independent Spent Fuel Storage Installation (ISFSI) Hot Conditions: M -System Malfunction F -Fission Product Barrier Degradation Cold Conditions:
C -Cold Shutdown I Refuel System Malfunction I EAL Subcategory 1 -Radiological Effluent 2 -Irradiated Fuel Event 3 -Area Radiation Levels 1 -Security 2 -Seismic Event 3 -Natural or Technological Hazard 4-Fire 5 -Hazardous Gas 6 -Control Room Evacuation 7 -Emergency Director Judgment 1 -Confinement Boundary 1 -Loss of Emergency AC Power 2 -Loss of Vital DC Power 3 -Loss of Control Room Indications 4 -RCS Activity 5 -RCS Leakage 6 -RPS Failure 7 -Loss of Communications 8 -Hazardous Event Affecting Safety Systems None 1 -RPV Level 2 -Loss of Emergency AC Power 3 -RCS Temperature 4 -Loss of Vital DC Power 5 -Loss of Communications 6 -Hazardous Event Affecting Safety Systems Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 8 of 203 2.5 Technical Bases Information 2.5.1 EAL technical bases are provided in Attachment 1 for each EAL according to EAL group (Any, Hot, Cold), EAL category (R, C, H, M, F and E) and EAL subcategory.
A summary explanation of each category and subcategory is given at the beginning of the technical bases discussions of the EALs included in the category.
For each EAL, the following information is provided:
- a. Category Letter & Title b. Subcategory Number & Title c. Initiating Condition (IC) 2.5.2 Site-specific description of the generic IC given in NEI 99-01 Rev. 6. a. EAL Identifier (enclosed in rectangle)
- 1) Each EAL is assigned a unique identifier to support accurate communication of the emergency classification to onsite and offsite personnel.
Four characters define each EAL identifier:
a) First character (letter):
Corresponds to the EAL category as described above (R, C, H, M, F or E) b) Second character (letter):
The emergency classification (G, S, A or U) G = General Emergency S = Site Area Emergency A= Alert U = Unusual Event c) Third character (number):
Subcategory number within the given category.
Subcategories are sequentially numbered beginning with the number one (1 ). If a category does not have a subcategory, this character is assigned the number one (1 ). d) Fourth character (number):
The numerical sequence of the EAL within the EAL subcategory.
If the subcategory has only one EAL, it is given the number one (1 ). 2) Classification (enclosed in rectangle):
Unusual Event (U), Alert (A), Site Area Emergency (S) or General Emergency (G) 3) EAL (enclosed in rectangle)
Exact wording of the EAL as it appears in the EAL Classification Matrix 4) Notes Any notes applicable to the EAL 2.6 Mode Applicability One or more of the follow i ng plant operating conditions comprise the mode to which each EAL is applicable:
1 -Power Operations, 2 -Startup, 3 -Hot Shutdown, 4 -Cold Shutdown , 5 -Refuel, D -Defueled , or All. Additionally , unique to the ISFSI, Storage Operations. (See Section 2 .10 for operating mode definitions).
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 9 of 203 2.7 Basis: A basis section that provides CGS-relevant information concerning the EAL as well as a description of the rationale for the EAL as provided in NEI 99-01 Rev. 6. 2.8 CGS Basis Reference(s):
Site-specific source documentation from which the EAL is derived 2.9 Operating Mode Applicability (ref. 4.1.2) 2.9.1 Power Operations Reactor mode switch is in RUN 2.9.2 Startup The mode switch is in STARTUP/HOT STANDBY or REFUEL with all reactor vessel head closure bolts fully tensioned 2.9.3 Hot Shutdown The mode switch is in SHUTDOWN, with all reactor vessel head closure bolts fully tensioned, and reactor coolant temperature is GT 200°F 2.9.4 Cold Shutdown The mode switch is in SHUTDOWN, all reactor vessel head closure bolts are fully tensioned, and reactor coolant temperature is LE 200°F 2.9.5 Refuel The mode switch is in REFUEL or SHUTDOWN and one or more reactor vessel head closure bolts less than fully tensioned
2.9.6 Defueled
All reactor fuel removed from RPV. (Full core off load during refueling or extended outage). 2.9.7 The plant operating mode that exists at the time that the event occurs (prior to any protective system or operator action being initiated in response to the condition) should be compared to the mode applicability of the EALs. If a lower or higher plant operating mode is reached before the emergency classification is made, the declaration shall be based on the mode that existed at the time the event occurred.
2.9.8 For events that occur in Cold Shutdown or Refuel, escalation is via EALs that have Cold Shutdown or Refuel for mode applicability, even if Hot Shutdown (or a higher mode) is entered during any subsequent heat-up. In particular, the fission product barrier EALs are applicable only to events that initiate in Hot Shutdown or higher. 2.9.9 The ISFSI related EAL EU1 .1 is applicable in the Storage Operations mode as defined in the Certificate of Compliance Appendix A Section 1.1 Definitions (ref 4.1.12): 2.10 Storage Operations Storage operations include all licensed activities that are performed at the ISFSI while a Spent Fuel Storage Cask (SFSC) containing spent fuel is situated within the ISFSI perimeter.
Storage Operations does not include MPC transfer between the Transfer Cask and the Overpack which Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 10 of 203 begins when the MPC is lifted off the HI-TRAC bottom lid and ends when the MPC is supported from beneath by the Overpack (or the reverse).
3.0 GUIDANCE
ON MAKING EMERGENCY CLASSIFICATIONS
3.1 General
Considerations When making an emergency classification, the Emergency Director must consider all information having a bearing on the proper assessment of an Initiating Condition (IC). This includes the Emergency Action Level (EAL) plus the associated Operating Mode Applicability, Notes, and the informing basis information.
In the Recognition Category F matrices, EALs are based on loss or potential loss of Fission Product Barrier Thresholds.
3.1.1 Classification
Timeliness NRG regulations require the licensee to establish and maintain the capability to assess, classify, and declare an emergency condition within 15 minutes after the availability of indications to plant operators that an emergency action level has been exceeded and to promptly declare the emergency condition as soon as possible following identification of the appropriate emergency classification level. The NRG staff has provided guidance on implementing this requirement in NSIR/DPR-ISG-01, "Interim Staff Guidance, Emergency Planning for Nuclear Power Plants" (ref. 4.1.3). 3.1.2 Valid Indications All emergency classification assessments shall be based upon valid indications, reports or conditions.
A valid indication, report, or condition, is one that has been verified through appropriate means such that there is no doubt regarding indicator operability, condition existence, or report accuracy.
For example, verification could be accomplished through an instrument channel check, response on related or redundant indicators, or direct observation by plant personnel.
An indication, report, or condition is considered to be valid when it is verified by (1) an instrument channel check, or (2) indications on related or redundant indicators, or (3) by direct observation by plant personnel, such that doubt related to indicator operability, the condition existence, or the report accuracy is removed. Implicit in this definition is the need for timely assessment.
The validation of indications should be completed in a manner that supports timely emergency declaration.
3.1.3 Imminent
Conditions For ICs and EALs that have a stipulated time duration (e.g., 15 minutes, 30 minutes, etc.), the Emergency Director should not wait until the applicable time has elapsed, but should declare the event as soon as it is determined that the condition has exceeded, or will likely exceed, the applicable time. If an ongoing radiological release is detected and the release start time is unknown, it should be assumed that the release duration specified in the IC/EAL has been exceeded, absent data to the contrary.
3.1.4 Planned
vs. Unplanned Events A planned work activity that results in an expected event or condition which meets or exceeds an EAL does not warrant an emergency declaration provided that: 1 ) the activity proceeds as planned, and 2) the plant remains within the limits imposed by the operating license. Such activities include planned work to test, manipulate, repair, maintain or modify a system or component.
In these cases, the controls associated Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 11 of 203 with the planning, preparation and execution of the work will ensure that compliance is maintained with all aspects of the operating license provided that the activity proceeds and concludes as expected.
Events or conditions of this type may be subject to the reporting requirements of 10 § CFR 50. 72 (ref. 4.1.4 ). 3.1.5 Classification Based on Analysis The assessment of some EALs is based on the results of analyses that are necessary to ascertain whether a specific EAL threshold has been exceeded (e.g., dose assessments, chemistry sampling, RCS leak rate calculation, etc.). For these EALs, the EAL wording or the associated basis discussion will identify the necessary analysis.
In these cases, the 15-minute declaration period starts with the availability of the analysis results that show the threshold to be exceeded (i.e., this is the time that the EAL information is first available).
The NRC expects licensees to establish the capability to initiate and complete EAL-related analyses within a reasonable period of time (e.g., maintain the necessary expertise on-shift}.
3.1.6 Emergency
Director Judgment While the EALs have been developed to address a full spectrum of possible events and conditions which may warrant emergency classification, a provision for classification based on operator/management experience and judgment is still necessary.
The NEI 99-01 EAL scheme provides the Emergency Director with the ability to classify events and conditions based upon judgment using EALs that are consistent with the Emergency Classification Level (ECL) definitions (refer to Category H). The Emergency Director will need to determine if the effects or consequences of the event or condition reasonably meet or exceed a particular ECL definition.
A similar provision is incorporated in the Fission Product Barrier Tables; judgment may be used to determine the status of a fission product barrier. 3.2 Classification Methodology To make an emergency classification, the user will compare an event or condition (i.e., the relevant plant indications and reports) to an EAL(s) and determine if the EAL has been met or exceeded.
The evaluation of an EAL must be consistent with the related Operating Mode Applicability and Notes. If an EAL has been met or exceeded, the associated IC is likewise met, the emergency classification process "clock" starts, and the ECL must be declared in accordance with plant procedures no later than fifteen minutes after the process "clock" started. When assessing an EAL that specifies a time duration for the off-normal condition, the "clock" for the EAL time duration runs concurrently with the emergency classification process "clock." For a full discussion of this timing requirement, refer to NSIR/DPR-ISG-01 (ref. 4.1.3). 3.2.1 Classification of Multiple Events and Conditions
- a. When multiple emergency events or conditions are present, the user will identify all met or exceeded EALs. The highest applicable ECL identified during this review is declared.
For example:
- If two Alert EALs are met, an Alert should be declared.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 12 of 203 c. Related guidance concerning classification of rapidly escalating events or conditions is provided in Regulatory Issue Summary (RIS) 2007-02, Clarification of NRG Guidance for Emergency Notifications During Quickly Changing Events (ref. 4.1.5). 3.2.2 Consideration of Mode Changes During Classification
- a. The mode in effect at the time that an event or condition occurred, and prior to any plant or operator response, is the mode that determines whether or not an IC is applicable.
If an event or condition occurs, and results in a mode change before the emergency is declared, the emergency classification level is still based on the mode that existed at the time that the event or condition was initiated (and not when it was declared).
Once a different mode is reached, any new event or condition, not related to the original event or condition, requiring emergency classification should be evaluated against the ICs and EALs applicable to the operating mode at the time of the new event or condition.
- b. For events that occur in Cold Shutdown or Refuel, escalation is via EALs that are applicable in the Cold Shutdown or Refuel modes, even if Hot Shutdown (or a higher mode) is entered during the subsequent plant response.
In particular, the fission product barrier EALs are applicable only to events that initiate in the Hot Shutdown mode or higher. 3.2.3 Classification of Imminent Conditions Although EALs provide specific thresholds, the Emergency Director must remain alert to events or conditions that could lead to meeting or exceeding an EAL within a relatively short period of time (i.e., a change in the ECL is IMMINENT).
If, in the judgment of the Emergency Director, meeting an EAL is IMMINENT, the emergency classification should be made as if the EAL has been met. While applicable to all emergency classification levels, this approach is particularly important at the higher emergency classification levels since it provides additional time for implementation of protective measures.
3.2.4 Emergency
Classification Level Upgrading and Downgrading
- a. An ECL may be downgraded when the event or condition that meets the highest IC and EAL no longer exists, and other site-specific downgrading requirements are met. If downgrading the ECL is deemed appropriate, the new ECL would then be based on a lower applicable IC(s) and EAL(s). The ECL may also simply be terminated.
- b. As noted above, guidance concerning classification of rapidly escalating events or conditions is provided in RIS 2007-02 (ref. 4.1.5). 3.2.5 Classification of Short-Lived Events Event-based ICs and EALs define a variety of specific occurrences that have potential or actual safety significance.
By their nature, some of these events may be short-lived and, thus, over before the emergency classification assessment can be completed.
If an event occurs that meets or exceeds an EAL, the associated ECL must be declared regardless of its continued presence at the time of declaration.
Examples of such events include an earthquake or a failure of the reactor protection system to automatically scram the reactor followed by a successful manual scram. 3.2.6 Classification of Transient Conditions Many of the I Cs and/or EALs employ time-based criteria.
These criteria will require Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 13 of 203 that the IC/EAL conditions be present for a defined period of time before an emergency declaration is warranted.
In cases where no time-based criterion is specified, it is recognized that some transient conditions may cause an EAL to be met for a brief period of time (e.g., a few seconds to a few minutes).
The following guidance should be applied to the classification of these conditions.
- a. EAL momentarily met during expected plant response -In instances where an EAL is briefly met during an expected (normal) plant response, an emergency declaration is not warranted provided that associated systems and components are operating as expected, and operator actions are performed in accordance with procedures.
- b. EAL momentarily met but the condition is corrected prior to an emergency declaration
-If an operator takes prompt manual action to address a condition, and the action is successful in correcting the condition prior to the emergency declaration, then the applicable EAL is not considered met and the associated emergency declaration is not required.
For illustrative purposes, consider the following example: An A TWS occurs and the high pressure ECCS systems fail to automatically start. RPV level rapidly decreases and the plant enters an inadequate core cooling condition (a potential loss of both the fuel clad and RCS barriers).
If an operator manually starts a high pressure ECCS system in accordance with an EOP step and clears the inadequate core cooling condition prior to an emergency declaration, then the classification should be based on the ATWS only. c. It is important to stress that the 15-minute emergency classification assessment period (process clock) is not a "grace period" during which a classification may be delayed to allow the performance of a corrective action that would obviate the need to classify the event. Emergency classification assessments must be deliberate and timely, with no undue delays. The provision discussed above addresses only those rapidly evolving situations when an operator is able to take a successful corrective action prior to the Emergency Director completing the review and steps necessary to make the emergency declaration.
This provision is included to ensure that any public protective actions resulting from the emergency classification are truly warranted by the plant conditions.
3.2.7 After-the-Fact Discovery of an Emergency Event or Condition
- a. In some cases, an EAL may be met but the emergency classification was not made at the time of the event or condition.
This situation can occur when personnel discover that an event or condition existed which met an EAL, but no emergency was declared, and the event or condition no longer exists at the time of discovery.
This may be due to the event or condition not being recognized at the time or an error that was made in the emergency classification process. b. In these cases, no emergency declaration is warranted; however, the guidance contained in NUREG-1022 (ref. 4.1.6) is applicable.
Specifically, the event should be reported to the NRC in accordance with 10 CFR § 50.72 (ref. 4.1.5) within one hour of the discovery of the undeclared event or condition.
The licensee should also notify appropriate State and local agencies in accordance with the agreed upon arrangements.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 14 of 203 3.2.8 Retraction of an Emergency Declaration Guidance on the retraction of an emergency declaration reported to the NRC is discussed in NUREG-1022 (ref. 4.1.6).
4.0 REFERENCES
4.1 Developmental
4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.1.10 4.1.11 4.1.12 4.1.13 4.1.14 4.1.15 4.1.16 NEI 99-01 Revision 6, Methodology for the Development of Emergency Action Levels for Non-Passive Reactors, ADAMS Accession Number ML 12326A805 Technical Specifications Table 1.1-1 Modes NSIR/DPR-ISG-01 Interim Staff Guidance, Emergency Planning for Nuclear Power Plants 10 § CFR 50.72 Immediate Notification Requirements for Operating Nuclear Power Reactors RIS 2007-02 Clarification of NRC Guidance for Emergency Notifications During Quickly Changing Events, February 2, 2007 NUREG-1022 Event Reporting Guidelines:
10CFR50.72 and 50.73 Hl-2002444, Holtec International Final Safety Analysis Report for the HI-STORM 100 Cask System, USNRC Docket No. 72-1014 , Chapter 7, Confinement PPM 1.20.3, Outage Risk Management Deleted 10 § CFR 50. 73 License Event Report System M570, General Arrangement Plan -El. 572 ft-0 in. and El. 606 ft-10 1/2 in. -Reactor Building Certificate of Compliance No. 1014 Appendix A Technical Specifications for the STORM 100 Cask System Section 1.1 Definitions SWP-PR0-03, Procedure Writer's Manual CGS Physical Security Plan CGS Graphics Plant Draw i ng 902118-P Energy Northwest Columbia Generating Station Offsite Dose Calculation Manual, Amendment 52 4.2 Implementing 4.2.1 PPM 13.1.1 , Classifying the Emergency
4.2.2 Emergency
Plan Columbia Generating Station 4.2.3 Columbia Generating Station NEI 99-01 Revision 6 EAL Compar i son Matrix 4.2.4 PPM 13.1.1 B, EAL Hot Matrix 4.2.5 PPM 13.1.1 C, EAL Cold Matrix Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 15 of 203 5.0 DEFINITIONS.
ACRONYMS & ABBREVIATIONS
5.1 Definitions
(ref. 4.1.1 except as noted) Selected terms used in Initiating Condition and Emergency Action Level statements are set in all capital letters (e.g., ALL CAPS). These words are defined terms that have specific meanings as used in this document.
The definitions of these terms are provided below. 5.1.1 ALERT Events are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant or a security event that involves probable life threatening risk to site personnel or damage to site equipment because of HOSTILE ACTION. Any releases are expected to be limited to small fractions of the EPA PAG exposure levels. 5.1.2 CAN/CANNOT BE MAINTAINED ABOVE/BELOW The value of an identified parameter is/is not able to be held within the specified limit. The determination requires an evaluation of system performance and availability in relation to parameter values and trends. An instruction prescribing action when a parameter cannot be maintained above or below a specified limit neither requires nor prohibits anticipatory action-depending upon plant conditions, the action may be taken as soon as it is determined that the limit will ultimately be exceeded, or delayed until the limit is actually reached. Once the parameter does exceed the limit, however, the action must be performed; it may not be delayed while attempts are made to restore the parameter to within the desired control band. 5.1.3 CAN/CANNOT BE RESTORED ABOVE/BELOW The value of an identified parameter is/is not able to be brought within the specified limit. The determination requires an evaluation of system performance and availability in relation to parameter values and trends. An instruction prescribing action when a value cannot be restored and maintained above or below a specified limit does not require immediate action simply because the current values is outside the range, but does not permit extended operation beyond the limit; the action must be taken as soon as it is apparent that the specified range cannot be attained.
5.1.4 CONFINEMENT
BOUNDARY The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage. As related to the CGS ISFSI, Confinement Boundary is defined as the Multi-Purpose Canister (MPC) (ref. 4.1.7). 5.1.5 CONTAINMENT CLOSURE The procedurally defined conditions or actions taken to secure Containment (Primary or Secondary) and its associated structures, systems, and components as a functional barrier to fission product release under shutdown conditions.
A functional barrier is one which mitigates offsite release during an event. Containment Closure requires a functional barrier (not necessarily Technical Specification Operable; the appropriate structures, systems, and components are functional) to exist at the time of an event. The site cannot rely on contingency methods to establish a functional barrier after the event has started. In Mode 4 either a functional Primary Containment or a functional Secondary Containment is sufficient to mitigate offsite release. In Mode 5, a functional Secondary Containment is sufficient to mitigate offsite release. Therefore, Containment Closure is met in Mode 4 with either a functional Primary Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 16 of 203 Containment or a functional Secondary Containment.
Containment Closure is met in Mode 5 with a functional Secondary Containment.
5.1.6 EPA PAGS Environment Protection Agency Protective Action Guidelines.
The EPA PAGs are expressed in terms of dose commitment:
1 Rem TEDE or 5 Rem COE Thyroid. Actual or projected offsite exposures in excess of the EPA PAGs requires CGS to recommend protective actions for the general public to offsite planning agencies.
5.1.7 EMERGENCY
ACTION LEVEL A pre-determined, site-specific, observable threshold for an Initiating Condition that, when met or exceeded, places the plant in a given emergency classification level. 5.1.8 EMERGENCY CLASSIFICATION LEVEL One of a set of names or titles established by the US Nuclear Regulatory Commission (NRC) for grouping off-normal events or conditions according to (1) potential or actual effects or consequences, and (2) resulting onsite and offsite response actions. The emergency classification levels, in ascending order of severity, are:
- Unusual Event (UE)
- Alert
- Site Area Emergency (SAE)
- General Emergency
5.1.9 EXPLOSION
5.1.10 5.1.11 5.1.12 5.1.13 A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization.
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion.
Such events require a post-event inspection to determine if the attributes of an explosion are present. FIRE Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute fires. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed.
FISSION PRODUCT BARRIER THRESHOLD A pre-determined, site-specific, observable threshold indicating the loss or potential loss of a fission product barrier. FLOODING A condition where water is entering a room or area faster than installed equipment is capable of removal, resulting in a rise of water level within the room or area. GENERAL EMERGENCY Events are in progress or have occurred which involve actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity or HOSTILE ACTION that results in an actual loss of physical control of the facility.
Releases can be reasonably expected to exceed EPA PAG exposure levels offsite for more than the immediate site area.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 17 of 203 5.1.14 HOSTAGE A person(s) held as leverage against the station to ensure that demands will be met by the station. 5.1.15 HOSTILE ACTION 5.1.16 5.1.17 An act toward CGS or its personnel that includes the use of violent force to destroy equipment, take hostages, and/or intimidate Energy Northwest to achieve an end. This includes attack by air, land, or water using guns, explosives, projectiles, vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
Hostile action should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on CGS. terrorism-based EALs should be used to address such activities (i.e., this may include violent acts between individuals in the Owner Controlled Area). HOSTILE FORCE One or more individuals who are engaged in a determined assault, overtly or by stealth and deception, equipped with suitable weapons capable of killing, maiming, or causing destruction.
IMMINENT The trajectory of events or conditions is such that an EAL will be met within a relatively short period of time regardless of mitigation or corrective actions. 5.1.18 IMPEDE(D)
Personnel access to a room or area is hindered to an extent that extraordinary measures are necessary to facilitate entry of personnel into the affected room/area (e.g., requiring use of protective equipment, such as SCBAs, that is not routinely employed).
5.1.19 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) A complex that is designed and constructed for the interim storage of spent nuclear fuel and other radioactive materials associated with spent fuel storage. 5.1.20 INITIATING CONDITION 5.1.21 5.1.22 5.1.23 5.1.24 An event or condition that aligns with the definition of one of the four emergency classification levels by virtue of the potential or actual effects or consequences.
MAINTAIN Take appropriate action to hold the value of an identified parameter within specified limits. NORMAL LEVELS As applied to radiological IC/EALs, the highest reading in the past twenty-four hours excluding the current peak value. OWNER CONTROLLED AREA The area that Energy Northwest maintains industrial and process control of (ref. 4.2.2). PROJECTILE An object directed toward CGS that could cause concern for its continued operability, reliability, or personnel safety.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 18 of 203 5.1.25 PROTECTED AREA An area located within the OWNER CONTROLLED AREA which contains the Columbia Generating Station power block and is surrounded by chain link fence (ref. 4.2.2). 5.1.26 RCS INTACT The RCS should be considered intact when the RCS pressure boundary is in its normal condition for the cold shutdown mode of operation (e.g., no freeze seals or nozzle dams). 5.1.27 REFUELING PATHWAY Reactor cavity and spent fuel pool comprise the Refuel Pathway (ref. 4.1.11 ). 5.1.28 SAFETY SYSTEM A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. These are typically systems classified as safety-related (as defined in 1 OCFR50.2):
Those structures, systems and components that are relied upon to remain functional during and following design basis events to assure: a. The integrity of the reactor coolant pressure boundary;
- b. The capability to shut down the reactor and maintain it in a safe shutdown condition;
- c. The capability to prevent or mitigate the consequences of accidents which could result in potential offsite exposures.
5.1.29 SECURITY CONDITION Any security event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A security condition does not involve a HOSTILE ACTION. 5.1.30 SITE AREA EMERGENCY Events are in progress or have occurred which involve actual or likely major failures of plant functions needed for protection of the public or HOSTILE ACTION that results in intentional damage or malicious acts; 1) toward site personnel or equipment that could lead to the likely failure of or; 2) that prevent effective access to, equipment needed for the protection of the public. Any releases are not expected to result in exposure levels which exceed EPA PAG exposure levels beyond the site boundary.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 19 of 203 5.1.31 SITE BOUNDARY 1950-meter radius around the plant as depicted in Figure 3-1 of the CGS ODCM (ref. 4.1.16). The key-hole area between the river and this radius is not within the Site Boundary.
5.1.32 UNISOLABLE An open or breached system line that cannot be isolated, remotely or locally. 5.1.33 UNPLANNED A parameter change or an event that is not: 1) the result of an intended evolution, or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown. 5.1.34 UNUSUAL EVENT Events are in progress or have occurred which indicate a potential degradation of the level of safety of the plant or indicate a security threat to facility protection has been initiated. No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of safety systems occurs. 5.1.35 VALID An indication, report, or condition, is considered to be valid when it is verified by (1) an instrument channel check, or (2) indications on related or redundant indicators, or (3) by direct observation by plant personnel, such that doubt related to the indicator's operability, the condition's existence, or the report's accuracy is removed. Implicit in this definition is the need for timely assessment.
5.1.36 VISIBLE DAMAGE Damage to a SAFETY SYSTEM train that i s readily observable without measurements, testing, or analysis.
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected SAFETY SYSTEM train. 5 .2 Abbreviations/
Acronyms OF Degrees Fahrenheit 0 Degrees AC Alternating Current APRM Average Power Range Meter ARI Automatic Rod Insertion ATWS Anticipated Transient Without Scram BWR Boiling Water Reactor BWROG Boiling W a t e r Reactor Owners Group CDE Committed Dose Equivalent CFR Code of Federal Regulat i ons Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 20 of 203 cpm cps OBA DC EAL ECCS ECL EOF EOP EPA EPG EPIP ESF FAA FBI FEMA FSAR GOS GE gm GT HCTL HPCS HOO IC IDLH IPEEE ISFSI Kett LCO LE LER LFL counts per minute counts per second Design Basis Accident Direct Current Emergency Action Level Emergency Core Cooling System Emergency Classification Level Emergency Operations Facility Emergency Operating Procedure Environmental Protection Agency Emergency Procedure Guideline Emergency Plan Implementing Procedure Engineered Safety Feature Federal Aviation Administration Federal Bureau of Investigation Federal Emergency Management Agency Final Safety Analysis Report Graphic Display System Greater than or Equal to Gram Greater Than Heat Capacity Temperature Limit High Pressure Core Spray NRC Headquarters Operations Officer Initiating Condition Immediately Dangerous to Life and Health Individual Plant Examination of External Events (Generic Letter 88-20) Independent Spent Fuel Storage Installation Effective Neutron Multiplication Factor Limiting Condition of Operation Less than or Equal to Licensee Event Report Lower Flammability Limit Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 21 of 203 LOCA LPCS LT LWR MPC µCi MSCRWL MSCP MSIV MSL mR MW NEI NESP NORAD NPP NRC NSSS OBE OCA ODCM ORO PPM PMU PRA/PSA PRM PWR PSIG PSP R RB RCC RCIC Loss of Coolant Accident Low Pressure Core Spray Less Than Light Water Reactor Maximum Permissible Concentration/Multi-Purpose Canister Micro Curie Minimum Steam Cooling RPV Water Level Minimum Steam Cooling Pressure Main Steam Isolation Valve Main Steam Line milliRoentgen Megawatt Nuclear Energy Institute National Environmental Studies Project North American Aerospace Defense Command Nuclear Power Plant Nuclear Regulatory Commission Nuclear Steam Supply System Operating Basis Earthquake Owner Controlled Area Off-site Dose Calculation Manual Offsite Response Organization Plant Procedure Manual Panel Meter Unit Probabilistic Risk Assessment I Probabilistic Safety Assessment Process Radiation Monitor Pressurized Water Reactor Pounds per Square Inch Gauge Pressure Suppression Pressure Roentgen Reactor Building Reactor Building Closed Cooling Reactor Core Isolation Cooling Number: 13.1.1A I Use Category:
REFERENCE
- Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 22 of 203 RCS Reactor Coolant System Rem Roentgen Equivalent Man RHR Residual Heat Removal RPS Reactor Protection System RPV Reactor Pressure Vessel RWCU Reactor Water Cleanup SGT Stand-By Gas Treatment SBO Station Blackout SDSP Shutdown Safety Plan SLC Standby Liquid Control SPDS Safety Parameter Display System SRO Senior Reactor Operator SSC Structure, System or Component SW Service Water TEA Turbine Exhaust Air TEDE Total Effective Dose Equivalent TAF Top of Active Fuel TSC Technical Support Center TSW Plant Service Water WEA Waste Exhaust Air Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 23 of 203 6.0 CGS-TO-NEI 99-01 Rev. 6 EAL CROSS-REFERENCE This cross-reference is provided to facilitate association and location of a CGS EAL within the NEI 99-01 IC/EAL identification scheme. Further information regarding the development of the CGS EALs based on the NEI guidance can be found in the EAL Comparison Matrix. NEI 99-01 Rev. 6 CGS EAL Example IC EAL RU1.1 AU1 1, 2, 3 RU2.1 AU2 1 RA1.1 AA1 1, 2 RA1.2 AA1 3 RA1.3 AA1 4 RA2.1 AA2 1 RA2.2 AA2 2 RA2.3 AA2 3 RA3.1 AA3 1, 2 RS1.1 AS1 1, 2 RS1.2 AS1 3 RS2.1 AS2 1 RG1.1 AG1 1, 2 RG1.2 AG1 3 RG2.1 AG2 1 CU1.1 CU1 1, 2 CU2.1 CU2 1 CU3.1 CU3 1 CU3.2 CU3 2 CU4.1 CU4 1 CU5.1 CU5 1, 2, 3 CA1.1 CA1 1, 2 CA2.1 CA2 1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 24 of 203 NEI 99-01 Rev. 6 CGS EAL Example IC EAL CA3.1 CA3 1, 2 CA6.1 CA6 1 CS1.1 CS1 1, 2 CS1.2 CS1 3 CG1.1 CG1 1 CG1.2 CG1 2 FA1.1 FA1 1 FS1.1 FS1 1 FG1.1 FG1 1 HU1.1 HU1 1, 2 3 HU2.1 HU2 1 HU3.1 HU3 1, 5 HU3.2 HU3 2 HU3.3 HU3 3,4 HU4.1 HU4 1 HU4.2 HU4 2 HU4.3 HU4 3,4 HU7.1 HU? 1 HA1.1 HA1 1, 2 HA5.1 HA5 1 HA6.1 HA6 1 HA7.1 HA? 1 HS1 .1 HS1 1 HS6.1 HS6 1 HS7.1 HS? 1 HG7.1 HG? 1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 25 of 203 NEI 99-01 Rev. 6 CGS EAL Example IC EAL MU1.1 SU1 1 MU3.1 SU2 1 MU4.1 SU3 1 MU4.2 SU3 2 MUS.1 SU4 1, 2, 3 MU6.1 SUS 1, 2 MU7.1 SU6 1, 2, 3 MA1.1 SA1 1 MA3.1 SA2 1 MA6.1 SAS 1 MA8.1 SA9 1 MS1.1 SS1 1 MS2.1 SS8 1 MS6.1 SSS 1 MG1.1 SG1 1 MG1.2 SG8 1 EU1 .1 E-HU1 1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 26 of 203 7.0 ATTACHMENTS
7.1 Emergency
Action Level Technical Bases 7 .2 Fission Product Barrier Matrix and Bases 7.3 Notes and Tables 7.4 Safe Operation
& Shutdown Areas Table 9 Bases 7.5 Columbia Generating Station Emergency Classification Chart Distribution Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 27 of 203 ATTACHMENT 7.1: EAL Technical Bases Category R -Abnormal Rad Release I Rad Effluent EAL Group: ANY (EALs in this category are applicable to any plant condition, hot or cold.) Many EALs are based on actual or potential degradation of fission product barriers because of the elevated potential for offsite radioactivity release. Degradation of fission product barriers though is not always apparent via non-radiological symptoms.
Therefore, direct indication of elevated radiological effluents or area radiation levels are appropriate symptoms for emergency classification.
At lower levels, abnormal radioactivity releases may be indicative of a failure of containment systems or precursors to more significant releases.
At higher release rates, offsite radiological conditions may result which require offsite protective actions. Elevated area radiation levels in the plant may also be indicative of the failure of containment systems or preclude access to plant vital equipment necessary to ensure plant safety. Events of this category pertain to the following subcategories
- 1. Radiological Effluent Direct indication of effluent radiation monitoring systems provides a rapid assessment mechanism to determine releases in excess of classifiable limits. Projected offsite doses, actual offsite field measurements or measured release rates via sampling indicate doses or dose rates above classifiable limits. 2. Irradiated Fuel Event Condit i ons indicative of a loss of adequate shielding or damage to irradiated fuel may preclude access to vital plant areas or result in radiological releases that warrant emergency classification.
- 3. Area Radiation Levels Sustained general area radiation levels which may preclude access to areas requiring continuous occupancy also warrant emergency classification.
Number: 13.1.1A j Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 28 of 203 Initiating Condition:
Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer EAL: RU1.1 Unusual Event (1) Reading on any Table 3 effluent radiation monitor GT column "UE" for GE 60 min. OR (2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate > 2 x ODCM limits for GE 60 min. (Notes 1, 2, 3) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Note 3: If the effluent flow past an effluent monitor is known to have stopped, indicating that the release path is isolated, the effluent monitor reading is no longer VALID for classification purposes Table 3 Effluent Monitor Classification Thresholds Release Point Monitor General SAE Alert UE PRM-RE-1B (I) ----*-------3.00E+03 cps Ill Reactor Building Exhaust :J PRM-RE-1C (H) 2.00E+04 cps 2.00E+03 cps 4.00E+02 cps ----0 Cl) Ill Turbine Building Exhaust TEA-RIS-13 8.35E-02 µCi/cc 8.35E-03 µCi/cc 8.35E-04 µCi/cc 4.22E-05 µCi/cc "' C> Radwaste Building WEA-RIS-14 3.45E-01 µCi/cc 3.45E-02 µCi/cc 3.45E-03 µCi/cc 3.98E-04 µCi/cc Exhaust Radwaste Effluent FDR-RIS-606
2 X HI-HI alarm "Cl :J TSW Effluent TSW-RIS-5
3.00E-05 µCi/cc C" :i Service Water Process A SW-R I S-604 1.00E+02 cps ------------Service Water Process B SW-RIS-605 1.00E+02 cps Mode Applicability:
I 1 I 2 3 4 s I det I Basis: Per NEI 99-01, this EAL addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways and planned batch releases from releases from non-continuous release pathways.
The column "UE" gaseous release values in Table 3 represent two times the appropriate ODCM release rate limits associated with the specified monitors (ref. 1, 2, 3, 4).
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 29 of 203 ATTACHMENT 7.1: EAL Technical Bases The Radwaste Effluent monitor (FDR-RIS-606)
Hi-Hi alarm is established per a discharge permit and should be multiplied by 2 to determine the effluent threshold.
This IC addresses a potential decrease in the level of safety of the plant as indicated by a low-level radiological release that exceeds regulatory commitments for an extended period of time (e.g., an uncontrolled release).
It includes any gaseous or liquid radiological release, monitored or un-monitored, including those for which a radioactivity discharge permit is normally prepared.
Nuclear power plants incorporate design features intended to control the release of radioactive effluents to the environment.
Further, there are administrative controls established to prevent unintentional releases, and to control and monitor intentional releases.
The occurrence of an extended, uncontrolled radioactive release to the environment is indicative of degradation in these features and/or controls.
Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Releases should not be prorated or averaged.
For example, a release exceeding 4 times release limits for 30 minutes does not meet the EAL. Threshold
- 1 -This threshold addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways as well as radioactivity releases that cause effluent radiation monitor readings to exceed 2 times the limit established by a radioactivity discharge permit. This EAL may also be associated with planned batch releases from non-continuous release pathways (e.g., radwaste, waste gas). Threshold
- 2 -This threshold addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental surveys, particularly on unmonitored pathways (e.g., spills of radioactive liquids into storm drains, heat exchanger leakage in river water systems, etc.). Escalation of the emergency classification level would be via IC RA 1. CGS Basis Reference(s):
- 1. CGS Offsite Dose Calculation Manual (ODCM) 2. Calculation NE-02-09-12 Revision 3 3. 16.10.1 Radioactive Liquid Waste Discharge to the River 4. FSAR Section 11.5 Process and Effluent Radiological Monitoring and Sampling 5. NEI 99-01 AU1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 30 of 203 Initiating Condition:
Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid COE EAL: RA1.1 Alert (1) Reading on any Table 3 effluent radiation monitor GT column "ALERT" for GE 15 min. OR (2) Dose assessment using actual meteorology indicates doses GT 10 mrem TEDE or GT 50 mrem thyroid CDE at or beyond the SITE BOUNDARY (Notes 1, 2, 3, 4) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Note 3: If the effluent flow past an effluent monitor is known to have stopped, indicating that the release path is isolated, the effluent monitor reading is no longer VALID for classification purposes Note 4: The pre-calculated effluent monitor values presented in EALs RA1 .1, RS1 .1 and RG1 .1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available Table 3 Effluent Monitor Classification Thresholds Release Point Monitor General SAE Alert UE PRM-RE-1B (I) ------------3.00E+03 cps I/I Reactor Building Exhaust ::I PRM-RE-1C (H) 2.00E+04 cps 2.00E+03 cps 4.00E+02 cps ----0 Cl> I/I Turbine Building Exhaust TEA-RIS-13 8.35E-02 µCi/cc 8.35E-03 µCi/cc 8.35E-04 µCi/cc 4.22E-05 µCi/cc ca (!) Radwaste Building WEA-RIS-14 3.45E-01 µCi/cc 3.45E-02 µCi/cc 3.45E-03 µCi/cc 3.98E-04 µCi/cc Exhaust Radwaste Effluent FDR-RIS-606
2 X HI-HI alarm :2 TSW Effluent TSW-RIS-5 3.00E-05 µCi/cc ::I ------------CT ::i Service Water Process A SW-RIS-604 1.00E+02 cps ------------Service Water Process B SW-RIS-605 1.00E+02 cps Mode Applicability:
1 2 3 4 s I def I Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 31 of 203 ATTACHMENT 7.1: EAL Technical Bases Basis: Threshold
- 1 The pre-calculated effluent monitor values presented in Table 3 should be used for emergency classification assessments only until the results from a dose assessment using actual meteorology are available.
This EAL address gaseous radioactivity releases, that for whatever reason, cause effluent radiation monitor readings corresponding to SITE BOUNDARY doses that exceed either (ref. 1, 2):
- 10 mRem TEDE
- 50 mRem COE Thyroid The column "ALERT" gaseous effluent release values in Table 3 correspond to calculated doses of 1 % of the EPA Protective Action Guidelines (TEDE or COE Thyroid) (ref. 1 ). Threshold
- 2 Dose assessments are performed by computer-based methods (ref. 3). This IC addresses a release of gaseous or liquid radioactivity that results in projected or actual offsite doses greater than or equal to 1 % of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases.
Releases of this magnitude represent an actual or potential substantial degradation of the level of safety of the plant as indicated by a radiological release that significantly exceeds regulatory limits (e.g., a significant uncontrolled release).
Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at 1 % of the EPA PAG of 1,000 mrem while the 50 mrem thyroid COE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid COE. Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Escalation of the emergency classification level wou Id be via IC RS 1. CGS Basis Reference(s}:
- 1. Calculation NE-02-09-12 Revision 3 2. FSAR Section 11.5 Process and Effluent Radiological Monitoring and Sampling 3. PPM 13.8.1 Emergency Dose Projection System Operations
- 4. NEI 99-01 AA1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 32 of 203 Category:
Subcategory:
Initiating Condition:
EAL: RA1.2 Alert ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid COE Analysis of a liquid effluent sample indicates a concentration or release rate that would result in doses GT 10 mrem TEDE or GT 50 mrem thyroid COE at or beyond the SITE BOUNDARY for 60 min. of exposure (Notes 1, 2) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Mode Applicability:
I 1 I 2 3 4 s I det I Basis: For a radiological water release, the calculated effluent concentration from a field team sample is compared to the emergency action level (ref. 1, 2, 3). This IC addresses a release of gaseous or liquid radioactivity that results in projected or actual offsite doses greater than or equal to 1 % of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases.
Releases of this magnitude represent an actual or potential substantial degradation of the level of safety of the plant as indicated by a radiological release that significantly exceeds regulatory limits (e.g., a significant uncontrolled release).
Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at 1 % of the EPA PAG of 1,000 mrem while the 50 mrem thyroid COE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid COE. Escalation of the emergency classification level would be via IC RS1. CGS Basis Reference(s):
- 1. FSAR Section 11.5 Process and Effluent Radiological Monitoring and Sampling 2. PPM 13.9.1 Environmental Field Monitoring Operations
- 3. PPM 13.9.5 Environmental Sample Collection
- 4. NEI 99-01 AA1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 33 of 203 Initiating Condition:
Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid COE EAL: RA1.3 Alert Field survey results indicate EITHER of the following at or beyond the SITE BOUNDARY:
- Closed window dose rates GT 10 mR/hr expected to continue for GE 60 min.
- Analyses of field survey samples indicate thyroid COE GT 50 mrem for 60 min. of inhalation. (Notes 1, 2) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Mode Applicability:
I 1 I 2 I 3 I 4 I 5 I def I Basis: Plant procedures, provides guidance for emergency or post-accident radiological environmental monitoring (ref. 1 ). This IC addresses a release of gaseous or liquid radioactivity that results in projected or actual offsite doses greater than or equal to 1 % of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases. Releases of this magnitude represent an actual or potential substantial degradation of the level of safety of the plant as indicated by a radiological release that significantly exceeds regulatory limits (e.g., a significant uncontrolled release).
Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at 1 % of the EPA PAG of 1,000 mrem while the 50 mrem thyroid COE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid COE. Escalation of the emergency classification level would be via IC RS1. CGS Basis Reference(s):
- 1. PPM 13.9.1 Environmental Field Monitoring Operations
- 2. NEI 99-01 AA1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT7.1:
EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 34 of 203 Initiating Condition:
Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid COE EAL: RS1.1 Site Area Emergency (1) Reading on any Table 3 effluent radiation monitor GT column "SAE" for GE 15 min. OR (2) Dose assessment using actual meteorology indicates doses GT 100 mrem TEDE or GT 500 mrem thyroid COE at or beyond the SITE BOUNDARY (Notes 1, 2, 3, 4) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Note 3: If the effluent flow past an effluent monitor is known to have stopped, indicating that the release path is isolated, the effluent monitor reading is no longer VALID for classification purposes Note 4: The pre-calculated effluent monitor values presented in EALs RA 1 .1 , RS 1.1 and RG 1 .1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available Table 3 Effluent Monitor Classification Thresholds Release Point Monitor General SAE Alert UE PRM-RE-1B (I) ------------3.00E+03 cps t/j Reacto r Building Exhaust ::::J PRM-RE-1C (H) 2.00E+04 cps 2.00E+03 cps 4.00E+02 cps ----0 cu t/j Turb i ne Building Exhaust TEA-RIS-13 8.35E-02 µCi/cc 8.35E-03 µCi/cc 8.35E-04 µCi/cc 4.22E-05 µCi/cc Cl:S (!) Radwaste Building WEA-RIS-14 3.45E-01 µCi/cc 3.45E-02 µCi/cc 3.45E-03 µCi/cc 3.98E-04 µCi/cc Exhaust Radwaste Effluent FDR-RIS-606
2 X HI-HI alarm :2 TSW Effluent TSW-RIS-5 3.00E-05 µCi/cc ::::J ------------C" :J Service Water Process A SW-RIS-604 1.00E+02 cps ------------Service Water Process B SW-RIS-605 1.00E+02 cps Mode Applicability: 1 2 I 3 4 I s I def I Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 35 of 203 ATTACHMENT 7.1: EAL Technical Bases Basis: Threshold
- 1 The pre-calculated effluent monitor values presented in Table 3 should only be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available.
This EAL address gaseous radioactivity releases, that for whatever reason, cause effluent radiation monitor readings corresponding to SITE BOUNDARY doses that exceed either (ref. 1, 2):
- 100 mRem TEOE
- 500 mRem COE Thyroid The column "SAE" gaseous effluent release values in Table 3 correspond to calculated doses of 10% of the EPA Protective Action Guidelines
{TEDE or COE Thyroid) (ref. 1 ). Threshold
- 2 Dose assessments are performed by computer-based methods (ref. 3). This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to 10% of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases.
Releases of this magnitude are associated with the failure of plant systems needed for the protection of the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEOE dose is set at 10% of the EPA PAG of 1,000 mrem while the 500 mrem thyroid COE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid COE. Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Escalation of the emergency classification level would be via IC RG1. CGS Basis Reference(s):
- 1. Calculation NE-02-09-12 Revision 3 2. FSAR Section 11.5 Process and Effluent Radiological Monitoring and Sampling 3. PPM 13.8.1 Emergency Dose Projection System Operations
- 4. NEI 99-01 AS1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 36 of 203 Initiating Condition:
Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid COE EAL: RS1 .2 Site Area Emergency Field survey results indicate EITHER of the following at or beyond the SITE BOUNDARY:
- Closed window dose rates GT 100 mR/hr expected to continue for GE 60 min.
- Analyses of field survey samples indicate thyroid COE GT 500 mrem for 60 min. of inhalation. (Notes 1, 2) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Mode Applicability:
I 1 I 2 I 3 I 4 I s I def I Basis: Plant procedures provide guidance for emergency or post-accident radiological environmental monitoring (ref. 1 ). This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to 10% of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases.
Releases of this magnitude are associated with the failure of plant systems needed for the protection of the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEOE dose is set at 10% of the EPA PAG of 1,000 mrem while the 500 mrem thyroid COE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid COE. Escalation of the emergency classification level would be via IC RG1. CGS Basis Reference(s):
- 1. PPM 13.9.1 Environmental Field Monitoring Operations
- 2. NEI 99-01 AS1 Number: 13.1.1A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 37 of 203 Initiating Condition:
Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE EAL: RG1 .1 General Emergency (1) Reading on any Table 3 effluent radiation monitor GT column "GENERAL" for GE 15 min. OR (2) Dose assessment using actual meteorology indicates doses GT 1,000 mrem TEDE or GT 5,000 mrem thyroid COE at or beyond the SITE BOUNDARY (Notes 1, 2, 3, 4) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Note 3: If the effluent flow past an effluent monitor is known to have stopped, indicating that the release path is isolated, the effluent monitor reading is no longer VALID for classification purposes Note 4: The pre-calculated effluent monitor values presented in EALs RA 1.1, RS1 .1 and RG1 .1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are Table 3 Effluent Monitor Classification Thresholds Release Point Monitor General SAE Alert UE PRM-RE-1B (I) ------------3.00E+03 cps t/I Reactor Building Exhaust ;::, PRM-RE-1C (H) 2.00E+04 cps 2.00E+03 cps 4.00E+02 cps ----0 Q) t/I Turbine Building Exhaust TEA-RIS-13 8.35E-02 µCi/cc 8.35E-03 µCi/cc 8.35E-04 µCi/cc 4.22E-05 µCi/cc CIS (!) Radwaste Building WEA-RIS-14 3.45E-01 µCi/cc 3.45E-02 µCi/cc 3.45E-03 µCi/cc 3.98E-04 µCi/cc Exhaust Radwaste Effluent FDR-RIS-606
2 X HI-HI alarm "C ;::, TSW Effluent TSW-RIS-5
3.00E-05 µCi/cc er :J Service Water Process A SW-RIS-604 1.00E+02 cps ------------Service Water Process B SW-RIS-605 1.00E+02 cps Mode Applicability: 1 2 3 4 s I def I Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 38 of 203 ATTACHMENT EAL Technical Bases Basis: Theshold #1 The pre-calculated effluent monitor values presented in Table 3 should only be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available.
This EAL address gaseous radioactivity releases, that for whatever reason, cause effluent radiation monitor readings corresponding to SITE BOUNDARY doses that exceed either (ref. 1 , 2):
- 1000 mRem TEDE
- 5000 mRem COE Thyroid The column "GENERAL" gaseous effluent release values in Table 3 correspond to calculated doses of 100% of the EPA Protective Action Guidelines (TEDE or COE Thyro i d) (ref. 1 ). Threshold
- 2 Dose assessments are performed by computer-based methods (ref. 3). This IC addresses a release of gaseous radioactivity that r esults in projected or actual offsite doses greater than or equal to the EPA Protective Action Guides (PAGs). It i ncludes both monitored and monitored releases.
Releases of this magnitude will require implementation of protective actions for the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. The TEDE dose is set at the EPA PAG of 1 , 000 mrem while the 5,000 mrem thyroid COE was established in consideration of the 1 : 5 ratio of the EPA PAG for TEDE and thyroid COE. Classification based on ef f luent mon i tor readings assumes that a release path to the environment is established. If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
CGS Basis Reference(s):
- 1. Calculation N E-02-09-12 Revision 3 2. FSAR Section 11.5 Process and Effluent Radiolog i cal Monitoring and Sampling 3. PPM 13.8.1 Emergency Dose Projection System Operations
- 4. NEI 99-01 AG1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 1 -Radiological Effluent Major Rev: Draft Minor Rev: N/A Page: 39 of 203 Initiating Condition:
Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE EAL: RG1 .2 General Emergency Field survey results indicate EITHER of the following at or beyond the SITE BOUNDARY:
- Closed window dose rates GT 1,000 mR/hr expected to continue for GE 60 min.
- Analyses of field survey samples indicate thyroid COE GT 5,000 mrem for 60 min. of inhalation. (Notes 1, 2) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: Plant procedures provide guidance for emergency or post-accident radiological environmental monitoring (ref. 1 ). This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to the EPA Protective Action Guides (PAGs). It includes both monitored and monitored releases.
Releases of this magnitude will require implementation of protective actions for the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at the EPA PAG of 1,000 mrem while the 5,000 mrem thyroid COE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid COE. CGS Basis Reference(s):
- 1. PPM 13.9.1 Environmental Field Monitoring Operations
- 2. NEI 99-01 AG1 Number: 13.1.1A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 2 -Irradiated Fuel Event Unplanned loss of water level above irradiated fuel RU2.1 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 40 of 203 UNPLANNED water level drop in the REFUELING PATHWAY as indicated by EITHER of the following:
- SFP level LE 22.3 ft.
- SFP low level alarm AND UNPLANNED rise in area radiation levels as indicated by any of the following radiation monitors:
- ARM-RIS-1 Reactor Building Fuel Pool Area
- ARM-RIS-2 Reactor Building Fuel Pool Area
- ARM-RIS-34 Reactor Building Elevation 606 Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The spent fuel pool is designed to maintain the water level in the pool above the top of active fuel providing cooling for the fuel bundles. The fuel pool low level alarm is actuated by level switch FP-LS-4A when fuel pool water level drops below 605' 5-1/2". SFP level is can be determined by FPC-Ll-21, FPC-LIT-21A, FPC-LIT-21 B or local indication (ref. 1, 2, 3). This EAL is applicable for conditions in which irradiated fuel is being transferred to and from the RPV and spent fuel pool as well as for spent fuel pool drain down events. ARM-RIS-1 and ARM-RIS-2 are located in the fuel pool area of the 606' elevation of the Reactor Building.
ARM-RIS-34 is located on the east side of the 606' elevation of the Reactor Building (ref. 4). This IC addresses a decrease in water level above irradiated fuel sufficient to cause elevated radiation levels. This condition could be a precursor to a more serious event and is also indicative of a minor loss in the ability to control radiation levels within the plant. It is therefore a potential degradation in the level of safety of the plant. A water level decrease will be primarily determined by indications from available level instrumentation.
Other sources of level indications may include reports from plant personnel (e.g., from a Refuel crew) or video camera observations (if available).
A significant drop in the water level may also cause an increase in the radiation levels of adjacent areas that can be detected by monitors in those locations.
The effects of planned evolutions should be considered.
For example, a Refuel bridge area radiation monitor reading may increase due to planned evolutions such as lifting of the reactor vessel head or movement of a fuel assembly.
Note that this EAL is applicable only in cases where the elevated reading is due to an unplanned loss of water level.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 41 of 203 ATTACHMENT 7.1: EAL Technical Bases A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refuel modes. Escalation of the emergency classification level would be via IC RA2. CGS Basis Reference(s):
- 1. PPM 4.626.FPC1-2.2 (4.626.FPC2-2.2)
Fuel Pool Level High/Low 2. PPM 4.627.FPC2-2.2 (4.627.FPC2-2.2)
Fuel Pool Level High/Low 3. ABN-FPC-LOSS Loss of Fuel Pool Cooling 4. FSAR Table 12.3-1 Area Monitors 5. NEI 99-01 AU2 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 2 -Irradiated Fuel Event Major Rev: Draft Minor Rev: N/A Page: 42 of 203 Initiating Condition:
Significant lowering of water level above, or damage to, irradiated fuel EAL: RA2.1 Alert Uncovery of irradiated fuel in the REFUELING PATHWAY Mode Applicability:
I 1 I 2 3 4 s I det I Basis: The spent fuel pool is designed to maintain the water level in the pool above the top of active fuel providing cooling for the fuel bundles. This EAL is applicable for conditions in which irradiated fuel is being transferred to and from the RPV and spent fuel pool as well as for spent fuel pool drain down events. This IC addresses events that have caused imminent or actual damage to an irradiated fuel assembly, or a significant lowering of water level within the spent fuel pool. These events present radiological safety challenges to plant personnel and are precursors to a release of radioactivity to the environment.
As such, they represent an actual or potential substantial degradation of the level of safety of the plant. This EAL applies to irradiated fuel that is licensed for dry storage up to the point that the loaded storage cask is sealed. Once sealed, damage to a loaded cask causing loss of the CONFINEMENT BOUNDARY is classified in accordance with EU1.1. Escalation of the emergency would be based on either Recognition Category R or C I Cs. This EAL escalates from RU2.1 in that the loss of level, in the affected portion of the REFUEL PATHWAY, is of sufficient magnitude to have resulted in uncovery of irradiated fuel. Indications of irradiated fuel uncovery may include direct or indirect visual observation (e.g., reports from personnel or camera images), as well as significant changes in water and radiation levels, or other plant parameters.
Computational aids may also be used (e.g., a boil-off curve). Classification of an event using this EAL should be based on the totality of available indications, reports and observations.
While an area radiation monitor could detect an increase in a dose rate due to a lowering of water level in some portion of the REFUEL PATHWAY, the reading may not be a reliable indication of whether or not the fuel is actually uncovered.
To the degree possible , readings should be considered in combination with other available indications of inventory loss. A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refuel modes. Escalation of the emergency classification level would be v i a IC RS1. CGS Basis Reference(s):
- 1. ABN-FPC-LOSS Loss of Fuel Pool Cooling 2. NEI 99-01 AA2 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 43 of 203 ATTACHMENT 7.1: EAL Technical Bases Category: R -Abnormal Rad Release I Rad Effluent Subcategory: 2 -Irradiated Fuel Event Initiating Condition:
Significant lowering of water level above, or damage to, irradiated fuel EAL: RA2.2 Alert Damage to irradiated fuel resulting in a release of radioactivity AND High alarm on any of the following radiation monitors:
- ARM-RIS-1 Reactor Building Fuel Pool Area
- ARM-RIS-2 Reactor Building Fuel Pool Area
- ARM-RIS-34 Reactor Building Elevation 606
- REA-RIS-609A-D Rx Bldg Vent Mode Applicability:
I 1 I 2 3 4 s I def I Basis: ARM-RIS-1 and ARM-RIS-2 are located in the fuel pool area of the 606' elevation of the Reactor Building.
ARM-RIS-34 is located on the east side of the 606' elevation of the Reactor Building (Ref. 1 ). The ARM alarm setpoints are controlled by procedure.
REA-RIS-609A-D are the Reactor Building Exhaust Plenum radiation monitors.
This system monitors the radiation level of the reactor building ventilation system exhaust plenum prior to its discharge from the building into the elevated release duct. A high radioactivity level in the exhaust system could be due to fission gases from damaged or leaking spent fuel or an accident (ref. 2). Actuation of the High-High alarm actuates a Secondary Containment isolation and starts SGT (ref. 3). This IC addresses events that have caused imminent or actual damage to an irradiated fuel assembly, or a significant lowering of water level within the spent fuel pool. These events present radiological safety challenges to plant personnel and are precursors to a release of radioactivity to the environment.
As such, they represent an actual or potential substantial degradation of the level of safety of the plant. This EAL applies to irradiated fuel that is licensed for dry storage up to the point that the loaded storage cask is sealed. Once sealed, damage to a loaded cask causing loss of the CONFINEMENT BOUNDARY is classified in accordance with EU1 .1. Escalation of the emergency would be based on either Recognition Category R or C !Cs. This EAL addresses a release of radioactive material caused by mechanical damage to irradiated fuel. Damaging events may include the dropping, bumping or binding of an assembly, or dropping a heavy load onto an assembly.
A rise in readings on radiation monitors should be considered in conjunction with in-plant reports or observations of a potential fuel damaging event (e.g., a fuel handling accident).
Escalation of the emergency classification level would be via IC RS1. CGS Basis Reference(s):
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 44 of 203 ATTACHMENT 7.1: EAL Technical Bases 2. FSAR Section 11.5.2.1.2 Reactor Building Exhaust Plenum Radiation Monitoring System 3. PPM 4.602.AS-1.4 Reactor Building Exh Plenum Rad Hi-Hi 4. NEI 99-01 AA2 Number: 13.1.1A j Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 2 -Irradiated Fuel Event Major Rev: Draft Minor Rev: N/A Page: 45 of 203 Initiating Condition:
Significant lowering of water level above, or damage to, irradiated fuel EAL: RA2.3 Alert Lowering of spent fuel pool level to 10 ft Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The spent fuel pool is designed to maintain the water level in the pool above the top of irradiated fuel and thus providing cooling for the fuel assemblies.
SFP level can be determined by FPC-LIT-21A, LIT-21 B, FPC-Ll-21 or local indication.
Instrument "reference zero" is the top of the spent fuel pool racks (ref. 1 ). The spent fuel pool is equipped with primary and backup guided wave radar probes to measure pool level. The range is continuous from the high pool level elevation to the top of the spent fuel racks. Fukushima order EA-12-051 required the installation of reliable SFP level indication (FPC-LIT-21 A and FPC-LIT-21 B) capable of identifying SFP level providing .personnel shielding (Level 2: 9.8 ft [rounded to 10 ft.]) (ref. 1). This EAL addresses events that have caused imminent or actual damage to an irradiated fuel assembly, or a significant lowering of water level within the spent fuel pool. These events present radiological safety challenges to plant personnel and are precursors to a release of radioactivity to the environment.
As such, they represent an actual or potential substantial degradation of the level of safety of the plant. A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refuel modes. Spent fuel pool water level at this value is within the lower end of the level range necessary to prevent significant dose consequences from direct gamma radiation to personnel performing operations in the vicinity of the spent fuel pool. This condition reflects a significant loss of spent fuel pool water inventory and thus it is also a precursor to a loss of the ability to adequately cool the irradiated fuel assembles stored in the pool. Escalation of the emergency classification level would be via ICs RS1or RS2). CGS Basis Reference(s):
- 1. IMDS for FPC-LIT-21A/21 B 2. NEI 99-01 AA2 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 2 -Irradiated Fuel Event Spent fuel pool level at the top of the fuel racks RS2.1 Site Area Emergency Lowering of spent fuel pool level to 0.5 ft Mode Applicability:
I 1 I 2 3 4 s I def I Basis: Major Rev: Draft Minor Rev: N/A Page: 46 of 203 The spent fuel pool is designed to maintain the water level in the pool above the top of irradiated fuel and thus providing cooling for the fuel assemblies.
SFP level can be determined by FPC-LIT-21A, LIT-218, FPC-Ll-21 or local indication.
Instrument
" reference zero" is the top of the spent fuel pool racks (ref. 1 ). The spent fuel pool is equipped with primary and backup guided wave radar probes to measure pool level. The range is continuous from the high pool level elevation to the top of the spent fuel racks. Fukushima order EA-12-051 required the installation of rel i able SFP level indication (FPC-LIT-21A and FPC-LIT-218) capable of identifying SFP level near top of the fuel racks (Level 3: 0.4 ft [rounded to 0.5 ft]) (ref. 1 ). This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to IMMINENT fuel damage. This condition entails major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration.
It is recognized that this IC would likely not be met until well after another Site Area Emergency IC was met; however, it is included to provide classification diversity.
Escalation of the emergency classification level would be via IC RG1 or RG2. CGS Basis Reference(s):
- 1. IMDS for FPC-LIT-21A/218
- 2. NEI 99-01 AS2 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 2 -Irradiated Fuel Event Major Rev: Draft Minor Rev: N/A Page: 4 7 of 203 Initiating Condition:
Spent fuel pool level cannot be restored to at least the top of the spent fuel racks for 60 minutes or longer EAL: RG2.1 General Emergency Spent fuel pool level cannot be restored to at least 0.5 ft for GE 60 min. (Note 1) Note 1: The Emergency D i rector should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I 1 I 2 3 4 s I det I Basis: The spent fuel pool is designed to maintain the water level in the pool above the top of irradiated fuel and thus providing cooling for the fuel assemblies.
SFP level can be determined by FPC-LIT-21A, LIT-21 B, FPC-Ll-21 or local indication.
Instrument "reference zero" is the top of the spent fuel pool racks (ref. 1 ). The spent fuel pool is equipped with primary and backup guided wave radar probes to measure pool level. The range is continuous from the high pool level elevation to the top of the spent fuel racks. Fukushima order EA-12-051 required the installation of reliable SFP level indication (FPC-LIT-21A and FPC-LIT-21 B) capable of identifying SFP level near top of the fuel racks (Level 3: 0.4 ft [rounded to 0.5 ft]). (ref. 1 ). This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to a prolonged uncovery of spent fuel. This condition will lead to fuel damage and a radiological release to the environment.
It is recognized that this IC would likely not be met until well after another General Emergency IC was met; however, it is included to prov i de classification diversity.
CGS Basis Reference(s):
- 1. IMDS for FPC-LIT-21A/21B
- 2. NEI 99-01 AG2 Number: 13.1.1A j Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases R -Abnormal Rad Release I Rad Effluent 3 -Area Radiation Levels Major Rev: Draft Minor Rev: N/A Page: 48 of 203 Initiating Condition:
Radiation levels that IMPEDE access to equipment necessary for normal plant operations, cooldown or shutdown EAL: RA3.1 Alert (1) Dose rates GT 15 mR/hr in Control Room (ARM-RIS-19) or CAS (by survey) OR (2) An UNPLANNED event results in radiation levels that prohibit or IMPEDE access to any Table 9 rooms or areas (Note 5) Table 9 Safe Operation
& Shutdown Areas Room/Area RW 467' Radwaste Control Room (RHR flush to RW tanks) RW 467' Vital Island (RHR-V-9 disconnect)
RB 422' B RHR Pump Rm (local pump temperatures)
RB 454' B RHR Pump Rm (operate RHR-V-85B)
Mode Applicability:
I 1 I 2 I 3 I 4 s I det I Basis: Threshold
- 1 Mode Applicability 3 3 3 3 The CGS Control Room requires continuous occupancy because of its importance to assure safe plant operations and control of site security functions (Central Alarm Station).
Control Room ARM (ARM-RIS-19) measures area radiation in a range of 1 to 10 4 mR/hr (ref. 1 ). Threshold
- 2 The list of plant rooms or areas with entry-related mode applicability identified specify those rooms or areas that contain equipment which require a manual/local action as specified in operating procedures used for normal plant operation, cooldown and shutdown.
Rooms or areas in which actions of a contingent or emergency nature would be performed (e.g., an action to address an off-normal or emergency condition such as emergency repairs, corrective measures or emergency operations) are not included.
In addition, the list specifies the plant mode(s) during which entry would be required for each room or area (ref. 2). This IC addresses elevated radiation levels in certain plant rooms/areas sufficient to preclude or impede personnel from performing actions necessary to maintain normal plant operation, or to perform Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 49 of 203 ATTACHMENT 7.1: EAL Technical Bases a normal plant cooldown and shutdown.
As such, it represents an actual or potential substantial degradation of the level of safety of the plant. The Emergency Director should consider the cause of the increased radiation levels and determine if another IC may be applicable.
For threshold
- 2, an Alert declaration is warranted if entry into the affected room/area is, or may be, procedurally required during the plant operating mode in effect at the time of the elevated radiation levels. The emergency classification is not contingent upon whether entry is actually necessary at the time of the increased radiation levels. Access should be considered as impeded if extraordinary measures are necessary to facilitate entry of personnel into the affected room/area (e.g., installing temporary shielding, requiring use of non-routine protective equipment, requesting an extension in dose limits beyond normal administrative limits). An emergency declaration is not warranted if any of the following conditions apply.
- The plant is in an operating mode different than the mode specified for the affected room/area (i.e., entry is not required during the operating mode in effect at the time of the elevated radiation levels). For example, the plant is in Mode 1 when the radiation increase occurs, and the procedures used for normal operation, cooldown and shutdown do not require entry into the affected room unti l Mode 4.
- The increased radiation levels are a result of a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area (e.g., radiography, spent filter or resin transfer, etc.).
- The action for which room/area entry is required is of an administrative or record keeping nature (e.g., normal rounds or routine inspections).
- The access control measures are of a conservative or precautionary nature , and would not actually prevent or impede a required action. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs. CGS Basis Reference(s):
- 1. FSAR Table 12.3-1 Area Monitors 2. Attachment 7.4 Safe Operation
& Shutdown Rooms/Areas Tables 9 Bases 3. NEI 99-01 M3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY -TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Category C -Cold Shutdown I Refuel System Malfunction EAL Group: Cold Conditions (RCS temperature
Given the variability of plant configurations (e.g., systems out-of-service for maintenance, containment open, reduced AC power redundancy, time since shutdown) during these periods, the consequences of any given initiating event can vary greatly. For example, a loss of decay heat removal capability that occurs at the end of an extended outage has less significance than a similar loss occurring during the first week after shutdown.
Compounding these events is the likelihood that instrumentation necessary for assessment may also be inoperable.
The cold shutdown and Refuel system malfunction EALs are based on performance capability to the extent possible with consideration given to RCS integrity, CONTAINMENT CLOSURE, and fuel clad integrity for the applicable operating modes (4 -Cold Shutdown, 5 -Refuel, D -Defueled).
The events of this category pertain to the following subcategories:
- 1. RPV Level Reactor Pressure Vessel water level is directly related to the status of adequate core cooling and, therefore, fuel clad integrity.
- 2. Loss of Emergency AC Power Loss of emergency plant electrical power can compromise plant safety system operability including decay heat removal and emergency core cooling systems which may be necessary to ensure fission product barrier integrity.
This category includes loss of onsite and offsite power sources for 4160 V emergency buses. 3. RCS Temperature Uncontrolled or inadvertent temperature or pressure increases are indicative of a potential loss of safety functions.
- 4. Loss of Vital DC Power Loss of vital plant electrical power can compromise plant safety system operability including decay heat removal and emergency core cooling systems which may be necessary to ensure fission product barrier integrity.
This category includes loss of power to or degraded voltage on the vital125 voe buses. 5. Loss of Communications Certain events that degrade plant operator ability to effectively communicate with essential personnel within or external to the plant warrant emergency classification.
- 6. Hazardous Event Affecting Safety Systems Certain hazardous natural and technological events may result in visible damage to or degraded performance of safety systems warranting classification.
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 1 -RPV Level Initiating Condition:
UNPLANNED loss of RPV inventory EAL: CU1.1 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 51 of 203 (1) UNPLANNED loss of reactor coolant results in RPV level less than a required lower limit for GE 15 min. (Note 1) OR (2) RPV level cannot be monitored AND UNPLANNED increase in any Table 1 sump or pool levels due to a loss of RPV inventory Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Basis: Table 1 Sumps/Pool
- Any valid Hi-Hi level alarm on R-1 through R-5 sumps
- FDR GE 10 GPM
- Wetwell level rise
- Observation of UNISOLABLE RCS leakage These Cold Shutdown EALs represent the hot condition EAL MU5.1, in which RCS leakage is associated with Technical Specification limits. In Cold Shutdown, these limits are not applicable
- hence, the use of RPV level as the parameter of concern in this EAL. This IC addresses the inability to restore and maintain water level to a required minimum level (or the lower limit of a level band), or a loss of the ability to monitor RPV level concurrent with indications of coolant leakage. Either of these conditions is considered to be a potential degradation of the level of safety of the plant. Refuel evolutions that decrease RCS water inventory are carefully planned and controlled.
An UNPLANNED event that results in water level decreasing below a procedurally required limit warrants the declaration of an Unusual Event due to the reduced water inventory that is available to keep the core covered. Continued loss of RCS inventory may result in escalation to the Alert emergency classification level via either IC CA 1 or CA3.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 52 of 203 ATTACHMENT 7.1: EAL Technical Bases EAL#1 In Mode 4 and Mode 5, prior to flood up, RPV level is monitored from -310 in. to +400 in. to ensure adequate coverage for expected and postulated conditions of RPV level. All instruments are referenced to a benchmark at 527.5 in. above the inside bottom head of the reactor vessel. This benchmark corresponds to the bottom edge of the steam dryer skirt and is the 0 in. reference indication on the RPV level instruments (ref. 1, 2, 3). In preparation for refueling operations, level instruments are modified to provide continuous level indication from within the RPV to the refuel floor (ref. 4, 5). The RPV level is controlled in a designated band in the reactor vessel and it is the inability to maintain level above the low end of the designated control band due to a loss of inventory resulting from a leak in the RCS that is the concern. With the plant in Refuel mode, RPV water level is normally maintained at or above the reactor vessel flange (ref. 6). EAL #1 recognizes that the minimum required RPV level can change several times during the course of a Refuel outage as different plant configurations and system lineups are implemented.
This EAL is met if the minimum level, specified for the current plant conditions, cannot be maintained for 15 minutes or longer. The minimum level is typically specified in the applicable operating procedure but may be specified in another controlling document.
The 15-minute threshold duration allows sufficient time for prompt operator actions to restore and maintain the expected water level. This criterion excludes transient conditions causing a brief lowering of water level. EAL#2 In this EAL, all RPV level indication is unavailable and the RPV inventory loss must be detected by the leakage indications listed in Table 1. Level increases must be evaluated against other potential sources of leakage such as cooling water sources inside the drywall to ensure they are indicative of RPV leakage. Reactor Building equipment or floor drain sump level rise may be indicative of RPV inventory losses external to the primary containment from systems connected to the RPV (ref. 7, 8, 6). With RHR System operating in the Shutdown Cooling mode, an unexplained rise in wetwell level could be indicative of RH R valve misalignment or leakage (ref. 10). If the make-up rate to the RPV unexplainably rises above the pre-established rate, a loss of RPV inventory may be occurring even if the source of the leakage cannot be immediately identified.
Visual observation of leakage from systems connected to the RCS in areas outside the primary containment that cannot be isolated could be indicative of a loss of RPV inventory.
EAL #2 addresses a condition where all means to determine RPV level have been lost. In this condition, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the RPV. CGS Basis Reference(s):
- 1. FSAR Section 7.5.1.1 2. FSAR Table 7.5-1 3. FSAR Figure 7.7-1 4. PPM 10.27.39 Refueling Reactor Vessel Level (Temporary)
- 5. SOP-CAVITY-FILL Reactor Cavity and Dryer Separator Pit Fill 6. Technical Specifications 3.9.6 7. FSAR Section 7.6.1.3 Number: 13.1.1A I Use Category: REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 53 of 203 ATTACHMENT 7.1: EAL Technical Bases 8. SOP-EDR-OPS Equipment Drain System Operation
- 9. SOP-FDR-OPS Floor Drain System Operation
- 10. SOP-RHR-SDC RHR Shutdown Cooling 11. NEI 99-01 CU1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: CA1.1 Alert ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 1 -RPV Level Significant loss of RPV inventory (1) Loss of RPV inventory as indicated by RPV level LT -50 in. OR (2) RPV level cannot be monitored for GE 15 min. (Note 1) AND Major Rev: Draft Minor Rev: N/A Page: 54 of 203 UNPLANNED increase in any Table 1 sump or pool levels due to a loss of RPV inventory Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I 4 I s Basis: Table 1 Sumps/Pool
- Any valid Hi-Hi level alarm on R-1 through R-5 sumps
- FDR GE 10 GPM
- Wetwell level rise
- Observation of UNISOLABLE RCS leakage This IC addresses conditions that are precursors to a loss of the ability to adequately cool irradiated fuel (i.e., a precursor to a challenge to the fuel clad barrier).
This condition represents a potential substantial reduction in the level of plant safety. If RPV water level continues to lower, then escalation to Site Area Emergency would be via IC CS1. EAL #1 The threshold RPV level of -50 in. is the low-low ECCS (HPCS) actuation setpoint (ref. 1, 2). In Cold Shutdown mode, the RCS will normally be intact and standard RPV level monitoring means are available. In the Refuel mode, the RCS is not intact and RPV level may be monitored by different means, including the ability to monitor level visually. For EAL #1, a lowering of water level below -50 in. indicates that operator actions have not been successful in restoring and maintaining RPV water level. The heat-up rate of the coolant will increase as the available water inventory is reduced. A continuing decrease in water level will lead to core uncovery.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 55 of 203 ATTACHMENT 7.1: EAL Technical Bases Although related, EAL #1 is concerned with the loss of RCS inventory and not the potential concurrent effects on systems needed for decay heat removal (e.g., loss of a Decay Heat Removal suction point). An increase in RCS temperature caused by a loss of decay heat removal capability is evaluated under ICCA3. EAL#2 In this EAL, all RPV level indication is unavailable and the RPV inventory loss must be detected by the leakage indications listed in Table 1. Level increases must be evaluated against other potential sources of leakage such as cooling water sources inside the drywall to ensure they are indicative of RPV leakage. Reactor Building equipment or floor drain sump level rise may be indicative of RPV inventory losses external to the primary containment from systems connected to the RPV (ref. 3, 4). With RHR System operating in the Shutdown Cooling mode, an unexplained rise in wetwell level could be indicative of RHR valve misalignment or leakage (ref. 5). If the make-up rate to the RPV unexplainably rises above the pre-established rate, a loss of RPV inventory may be occurring even if the source of the leakage cannot be immediately identified.
Visual observation of leakage from systems connected to the RCS in areas outside the primary containment that cannot be isolated could be indicative of a loss of RPV inventory.
For EAL #2, the inability to monitor RPV level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation.
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the RPV. The 15-minute duration for the loss of level indication was chosen because it is half of the EAL duration specified in IC CS1. CGS Basis Reference(s):
- 1. Technical Specifications Table 3.3.5.1-1
- 4. SOP-FDR-OPS Floor Drain System Operation
- 5. SOP-RHR-SDC RHR Shutdown Cooling 6. NEI 99-01 CA1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 1 -RPV Level Major Rev: Draft Minor Rev: N/A Page: 56 of 203 Initiating Condition:
Loss of RPV inventory affecting core decay heat removal capability EAL: CS1.1 Site Area Emergency (1) CONTAINMENT CLOSURE not established AND RPV level LT-129 in. OR (2) CONTAINMENT CLOSURE established AND RPV level LT -161 in. Mode Applicability:
I I I I 4 s Basis: EAL#1 The threshold RPV water level of-129 in. is the low-low-low ECCS actuation setpoint.
The magnitude of this loss of water indicates that makeup systems have not been effective and may not be capable of preventing further RPV water level decrease and potential core uncovery.
The inability to restore and maintain level after reaching this setpoint infers a failure of the RCS barrier and Potential Loss of the Fuel Clad barrier. (ref. 1) EAL#2 When RPV level drops to the top of active fuel (an indicated RPV level of -161 in.), core uncovery starts to occur (ref. 2). This IC addresses a significant and prolonged loss of RCS inventory control and makeup capability leading to IMMINENT fuel damage. The lost inventory may be due to a RCS component failure, a loss of configuration control or prolonged boiling of reactor coolant. These conditions entail major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration.
Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RPV level cannot be restored, fuel damage is probable.
Outage/shutdown contingency plans typically provide for re-establishing or verifying CONTAINMENT CLOSURE following a loss of heat removal or RCS inventory control functions.
The difference in the specified RPV levels of CS1.1 (1) and CS1.1 (2) reflect the fact that with CONTAINMENT CLOSURE established, there is a lower probability of a fission product release to the environment.
This EAL addresses concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operations at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management.
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Escalation of the emergency classification level would be via IC CG1 or RG1. CGS Basis Reference(s):
Major Rev: Draft Minor Rev: N/A Page: 57 of 203 1. Technical Specifications Table 3.3.5.1-1 , "Emergency Core Cooling System Instrumentation" 2. PPM 5.1.1 RPV Control 3. NEI 99-01 CS1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 1 -RPV Level Major Rev: Draft Minor Rev: N/A Page: 58 of 203 Initiating Condition:
Loss of RPV inventory affecting core decay heat removal capability EAL: CS1.2 Site Area Emergency RPV level cannot be monitored for GE 30 min. (Note 1) AND Core uncovery is indicated by any of the following:
- UNPLANNED wetwell level rise GT 2 inches (PPM 5.2.1 entry condition)
- Observation of UNISOLABLE RCS leakage outside primary containment of sufficient magnitude to indicate core uncovery Note 1: The Emergency D i rector should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability: 4 5 Basis: In this EAL, all RPV level indication is unavailable and the RPV inventory loss must be detected by the leakage indications provided.
Level increases must be evaluated against other potential sources of leakage such as cooling water sources inside the drywall to ensure they are indicative of RPV leakage. Reactor Building equipment or floor drain sump level r i se may be indicative of RPV inventory losses external to the primary containment from systems connected to the RPV (ref. 1, 2). With RHR System operating in the Shutdown Cool i ng mode, an unexplained r i se in wetwell level could be indicative of RHR valve misalignment or leakage (ref. 3). If the make-up rate to the RPV unexplainably rises above the pre-established rate, a loss of RPV inventory may be occurring even if the source of the leakage cannot be immediately identified.
An UNPLANNED wetwell level increase to GT 2 inches or a VALID RB room high level alarm indicates a significant loss of RCS that could lead to core uncovery if not isolated (ref. 4 , 5). Visual observation of significant leakage from systems connected to the RCS in areas outside the primary containment that cannot be isolated could be indicative of a loss of RPV inventory sufficient to lead to core uncovery. This IC addresses a significant and prolonged l oss of reactor vessel/RCS inventory control and makeup capability leading to IMMINENT fuel damage. The lost inventory may be due to a RCS component failure, a loss of configuration control or prolonged boiling of reactor coolant. These cond i tions entail major failures of plant functions needed for protection of t he public and thus warrant a Si t e Area E mergency decl a ration. Following an extended loss of core decay heat removal and inventory makeup , decay heat will cause reactor coolant bo i ling and a further reduction in reactor vessel level. If RPV level cannot be restored, fue l damage is probable.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 59 of 203 ATTACHMENT 7.1: EAL Technical Bases The 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties).
It also allows sufficient time for performance of actions to terminate leakage, recover inventory control/makeup equipment and/or restore level monitoring.
The inability to monitor RPV level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation.
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the RCS. This EAL addresses concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operations at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management.
Escalation of the emergency classification level would be via IC CG1 or RG1 CGS Basis Reference(s):
- 1. SOP-EDR-OPS Equipment Drain System Operation
- 2. SOP-FDR-OPS Floor Drain System Operation
- 3. SOP-RHR-SDC RHR Shutdown Cooling 4. PPM 5.2.1 Primary Containment Control 5. PPM 5.3.1 Secondary Containment Control 6. NEI 99-01 CS1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 1 -RPV Level Major Rev: Draft Minor Rev: N/A Page: 60 of 203 Initiating Condition:
Loss of RPV inventory affecting fuel clad integrity with containment challenged EAL: CG1 .1 General Emergency RPV level LT -161 in. for GE 30 min. (Note 1) AND Any of the following indications of Containment Challenge:
- CONTAINMENT CLOSURE not established (Note 6)
- UNPLANNED rise in PC pressure
- RB area radiation GT any Maximum Safe Operating level (PPM 5.3.1 Table 24) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I I I I 4 I s I Basis: When RPV level drops to the top of active fuel (an indicated RPV level of -161 in.), core uncovery starts to occur (ref. 1, 2). Four conditions are associated with a challenge to primary containment (PC) integrity:
- Containment Closure is defined as the Shutdown Safety Plan (SDSP) actions taken to secure primary or secondary containment and its associated structures, systems, and components as a functional barrier to fission product release under existing plant conditions.
This definition is less restrictive than Technical Specification criteria governing Primary and Secondary Containment operability.
If the Technical Specification criteria are met , therefore, Containment Closure has been established. (ref. 3, 4, 5)
- Explosive (deflagration) mixtures in the primary containment are assumed to be elevated concentrations of hydrogen and oxygen. BWR industry evaluation of hydrogen generation for development of EOPs/SAGs indicates that any hydrogen concentration above minimum detectable is not to be expected within the short term. Post-LOCA hydrogen generation primarily caused by radiolysis is a slowly evolving, long-term condition.
Hydrogen concentrations that rapidly develop are most likely caused by metal-water reaction.
A water reaction is indicative of an accident more severe than accidents cons i dered in the plant design basis and would be indicative, therefore, of a potential threat to primary containment integrity.
Hydrogen concentration of approximately 6% is considered the global deflagration concentration limit (ref. 6). The specified values for this threshold are the minimum global deflagration concentration limits (6% hydrogen and 5% oxygen, ref. 5) and readily recognizable because 6% hydrogen is well Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 61 of 203 ATTACHMENT 7.1: EAL Technical Bases above the EOP flowchart entry condition (ref. 8). The minimum global deflagration hydrogen/oxygen concentrations (6%/5%, respectively) require intentional primary containment venting, which is defined to be a loss of the primary containment barrier. Atmosphere samples from a minimum of two locations inside the primary containment and one location in the suppression chamber are sequentially monitored for hydrogen and oxygen percentage levels by each of two redundant analyzer systems. The analyzers are single range (0 to 30% hydrogen and 0 to 30% oxygen). Two redundant (divisional) recorders are provided in the Main Control Room CMS-02/H2R-1 (H13-P827) and CMS-02/H2R-2 (H13-P811).
Hydrogen and oxygen concentrations can also be displayed on the plant computers (ref. 9-12)
- Any UNPLANNED rise in PC pressure in the Cold Shutdown or Refueling mode indicates Containment Closure cannot be assured and the primary containment cannot be relied upon as a barrier to fission product release.
- RB (Reactor Building) area radiation monitors should provide indication of increased release that may be indicative of a challenge to Containment Closure. The Maximum Safe Operating levels are indicative of problems in the secondary containment that are spreading.
The locations into which the primary system discharge is of concern correspond to the areas addressed in Table 24 of the EOP flowcharts (ref. 13). All Table 24 Maximum Safe Operating radiation levels can be determined in the main Control Room. If RPV level is restored and maintained above the top of active fuel before a Containment Challenge condition occurs and subsequently a Containment Challenge condition is reached, this EAL is not met. This IC addresses the inability to restore and maintain reactor vessel level above the top of active fuel with containment challenged.
This condition represents actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity.
Releases can be reasonably expected to exceed EPA PAG exposure levels offsite for more than the immediate site area. Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RPV level cannot be restored, fuel damage is probable.
With CONTAINMENT CLOSURE not established, there is a high potential for a direct and unmonitored release of radioactivity to the environment.
If CONTAINMENT CLOSURE is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required.
The existence of an explosive mixture means, at a minimum, that the containment atmospheric hydrogen concentration is sufficient to support a hydrogen burn (i.e., at the lower deflagration limit). A hydrogen burn will raise containment pressure and could result in collateral equipment damage leading to a loss of containment integrity.
It therefore represents a challenge to Containment integrity.
In the early stages of a core uncovery event, it is unlikely that hydrogen buildup due to a core uncovery could result in an explosive gas mixture in containment.
If all installed hydrogen gas monitors are of-service during an event leading to fuel cladding damage, it may not be possible to obtain a containment hydrogen gas concentration reading as ambient conditions within the containment will preclude personnel access. During periods when installed containment hydrogen gas monitors are of-service, operators may use the other listed indications to assess whether or not containment is challenged.
The 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties).
It also allows sufficient time for performance of actions to terminate Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 62 of 203 ATTACHMENT 7.1: EAL Technical Bases leakage, recover inventory control/makeup equipment and/or restore level monitoring.
This EAL addresses concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operations at Commercial Nuclear Power Plants in the United States; and NU MARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management.
CGS Basis Reference(s):
- 1. Calculation NE-02-03-05 Attachment 3 Note 8 2. PPM 5.1.1 RPV Control 3. Technical Specifications 3.6.1.1 4. Technical Specifications 3.6.4.1 5. PPM 1.20.3 Outage Risk Management
- 6. BWROG EPG/SAG Revision 2, Sections PC/G 7. PPM 5.7.1 RPV and Primary Containment Flooding SAG, Table 19 8. PPM 5.2.1 Primary Containment Control 9. FSAR Section 7.5.1.5.4
- 10. PPM 5.0.10 Flowchart Training Manual 11. PPM 4.814.J1 814.J1 Annunciator Panel Alarms, 2-2 12. PPM 4.814.J2 814.J2 Annunciator Panel Alarms, 2-2 13. PPM 5.3.1 Secondary Containment Control 14. NEI 99-01 CG1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 1 -RPV Level Major Rev: Draft Minor Rev: N/A Page: 63 of 203 Initiating Condition:
Loss of RPV inventory affecting fuel clad integrity with containment challenged EAL: CG1 .2 General Emergency RPV level cannot be monitored for GE 30 min. (Note 1) AND Core uncovery is indicated by any of the following:
- UNPLANNED wetwell level rise GT 2 inches (PPM 5.2.1 entry condition)
- Observation of UNISOLABLE RCS leakage outside primary containment of sufficient magnitude to indicate core uncover AND Any of the following indication of containment challenge:
- CONTAINMENT CLOSURE not established (Note 6)
- UNPLANNED rise in PC pressure
Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 6: If CONTAINMENT CLOSURE is re-established prior to exceeding the 30-minute time limit, declaration of a General Emergency is not required Mode Applicability: 4 5 Basis: In this EAL, all RPV level indication is unavailable and the RPV inventory loss must be detected by the leakage indications provided.
Level increases must be evaluated against other potential sources of leakage such as cooling water sources inside the drywell to ensure they are indicative of RPV leakage. Reactor Building equipment or floor drain sump level rise may be indicative of RPV inventory losses external to the primary containment from systems connected to the RPV (ref. 1, 2). With RHR System operating in the Shutdown Cooling mode, an unexplained rise in wetwell level could be indicative of RHR valve misalignment or leakage (ref. 3). If the make-up rate to the RPV unexplainably rises above the pre-established rate, a loss of RPV inventory may be occurring even if the source of the leakage cannot be immediately identified.
An UNPLANNED wetwell level increase to GT 2 inches or a VALID RB room high level alarm indicates a significant loss of RCS that could lead to core uncovery if not isolated (ref. 4, 5).
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 64 of 203 ATTACHMENT 7.1: EAL Technical Bases Visual observation of significant leakage from systems connected to the RCS in areas outside the primary containment that cannot be isolated could be indicative of a loss of RPV inventory sufficient to lead to core uncovery. Four conditions are associated with a challenge to primary containment (PC) integrity:
- CONTAINMENT CLOSURE is not established.
- Explosive (deflagration) mixtures in the primary containment are assumed to be elevated concentrations of hydrogen and oxygen. BWR industry evaluation of hydrogen generation for development of EOPs/SAGs indicates that any hydrogen concentration above minimum detectable is not to be expected within the short term. Post-LOCA hydrogen generation primarily caused by radiolysis is a slowly evolving, long-term condition.
Hydrogen concentrations that rapidly develop are most likely caused by metal-water reaction.
A metal-water reaction is indicative of an accident more severe than accidents considered in the plant design basis and would be indicative, therefore, of a potential threat to primary containment integrity.
Hydrogen concentration of approximately 6% is considered the global deflagration concentration limit (ref. 6). The specified values for this threshold are the minimum global deflagration concentration limits (6% hydrogen and 5% oxygen, ref. 6) and readily recognizable because 6% hydrogen is well above the EOP flowchart entry condition (ref. 8). The minimum global deflagration hydrogen/oxygen concentrations (6%/5%, respectively) require intentional primary containment venting, which is defined to be a loss of the primary containment barrier. Atmosphere samples from a minimum of two locations inside the primary containment and one location in the suppression chamber are sequentially monitored for hydrogen and oxygen percentage levels by each of two redundant analyzer systems. The analyzers are single range (0 to 30% hydrogen and 0 to 30% oxygen). Two redundant (divisional) recorders are provided in the Main Control Room CMS 02/H2R 1 (H13 P827) and CMS 02/H2R 2 (H13 P811). Hydrogen and oxygen concentrations can also be displayed on the plant computers (Ref. 9-12)
- Any unplanned rise in PC pressure in the Cold Shutdown or Refueling mode indicates Containment Closure cannot be assured and the primary containment cannot be relied upon as a barrier to fission product release.
- RB (Reactor Building) area radiation monitors should provide indication of increased release that may be indicative of a challenge to Containment Closure. The Maximum Safe Operating levels are indicative of problems in the secondary containment that are spreading.
The locations into which the primary system discharge is of concern correspond to the areas addressed in Table 24 of the EOP flowcharts (ref.13).
This IC addresses the inability to restore and maintain reactor vessel level above the top of active fuel with containment challenged.
This condition represents actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity.
Releases can be reasonably expected to exceed EPA PAG exposure levels offsite for more than the immediate site area. Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RPV level cannot be restored, fuel damage is probable.
With CONTAINMENT CLOSURE not established, there is a high potential for a direct and unmonitored release of radioactivity to the environment.
If CONTAINMENT CLOSURE is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 65 of 203 ATTACHMENT 7.1: EAL Technical Bases The existence of an explosive mixture means, at a minimum, that the containment atmospheric hydrogen concentration is sufficient to support a hydrogen burn (i.e., at the lower deflagration limit). A hydrogen burn will raise containment pressure and could result in collateral equipment damage leading to a loss of containment integrity.
It therefore represents a challenge to Containment integrity.
In the early stages of a core uncovery event, it is unlikely that hydrogen buildup due to a core uncovery could result in an explosive gas mixture in containment.
If all installed hydrogen gas monitors are of-service during an event leading to fuel cladding damage, it may not be possible to obtain a containment hydrogen gas concentration reading as ambient conditions within the containment will preclude personnel access. During periods when installed containment hydrogen gas monitors are of-service, operators may use the other listed indications to assess whether or not containment is challenged.
The 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties).
It also allows sufficient time for performance of actions to terminate leakage, recover inventory control/makeup equipment and/or restore level monitoring.
The inability to monitor RPV level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation.
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the RCS. This EAL addresses concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operations at Commercial Nuclear Power Plants in the United States; and NU MARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management. CGS Basis Reference(s):
- 1. SOP-EDR-OPS Equipment Drain System Operation
- 2. SOP-FDR-OPS Floor Drain System Operation
- 3. SOP-RHR-SDC RHR Shutdown Cooling 4. PPM 5.2.1 Primary Containment Control 5. PPM 5.3.1 Secondary Containment Control 6. BWROG EPG/SAG Revision 2, Sections PC/G 7. PPM 5.7.1 RPV and Primary Containment Flooding SAG, Table 19 8. PPM 5.2.1 Primary Containment Control 9. FSAR Section 7.5.1.5.4
- 10. PPM 5.0.10 Flowchart Training Manual 11. PPM 4.814.J1 814.J1 Annunciator Panel Alarms, 2-2 12. PPM 4.814.J2 814.J2 Annunciator Panel Alarms, 2-2 13. PPM 5.3.1 Secondary Containment Control 14. NEI 99-01 CG1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 2 -Loss of Emergency AC Power Major Rev: Draft Minor Rev: N/A Page: 66 of 203 Initiating Condition:
Loss of fil! but one AC power source to emergency buses for 15 minutes or longer EAL: CU2.1 Unusual Event AC power capability, Table 2, to emergency buses SM-7 and SM-8 reduced to a single power source for GE 15 min. (Note 1) AND Any additional single power source failure will result in a loss of fil! AC power to SAFETY SYSTEMS Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Table 2 AC Power Sources Off site
- Startup Transformer TR-S
- Backup Transformer TR-B
- Backfeed 500 KV power through Main Transformers (if already aligned in modes 4, 5, def only) On site
- DG1
- DG2
- Main Generator via TR-N1/N2 Mode Applicability:
I 4 I s I def I Basis: Table 2 provides the list of AC power sources available to power emergency buses (ref. 1, 2). Station Startup 230KV power comes from the Ashe substa t ion through Startup transformer TR-S. The startup transformer usually supplies station auxiliary loads when the main generator is not available.
S t a tion B a ckup 11 5 KV pow e r from th e B e nton Sub s t a tion f ee d er c a n be s up p li e d to eme rgency bus e s SM-7 and SM-8 (ref. 3, 4). Credit is not taken in this EAL fo r SM-4/DG3 crosstie capability because establishing the crosstie to SM-7 or SM-8 is assumed t o req u ire more than 15 minutes (5). SM-4 is not a site specific emergency AC buss source since SM-4 does not provide core cooling or containment cooling.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 67 of 203 ATTACHMENT 7.1: EAL Technical Bases It is possible to remove startup power from service and continue to supply the plant during shutdown conditions by backfeeding 500 KV power from Ashe Substation through the Main Transformers, the Normal Transformers and associated "N" breakers.
This involves disconnecting the Main Generator from the Isolated Phase conductors (25 KV system) and overriding various interlocks.
This action would take significantly longer than 15 minutes; therefore, backfeed must be in service to credit this source (ref. 7). The second threshold statement in this EAL does not describe a separate condition, it is clarifying the first threshold statement.
This cold condition EAL is equivalent to the hot condition EAL MA 1.1. This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS. In this condition, the sole AC power source may be powering one, or more than one, train of safety-related equipment.
When in the cold shutdown, Refuel, or defueled mode, this condition is not classified as an Alert because of the increased time available to restore another power source to service. Additional time is available due to the reduced core decay heat load, and the lower temperatures and pressures in various plant systems. Thus, when in these modes, this condition is considered to be a potential degradation of the level of safety of the plant. An "AC power source" is a source recognized in AOPs, and capable of supplying required power to an emergency bus. Some examples of this condition are presented below.
- A loss of all offsite power with a concurrent failure of one division of emergency power sources (e.g., onsite diesel generators).
- A loss of all offsite power and loss of all emergency power sources (e.g., onsite diesel generators) with a single train of emergency buses being back-fed from the unit main generator.
- A loss of emergency power sources (e.g., onsite diesel generators) with a single division of emergency buses being back-fed from an offsite power source. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. The subsequent loss of the remaining single power source would escalate the event to an Alert in accordance with IC CA2. CGS Basis Reference(s):
- 1. FSAR Figure 8.1-2.1 Main One-Line Diagram -Main Buses 2. FSAR Figure 8.1-2.2 Main One-Line Diagram -Emergency Buses 3. FSAR Section 8.2 4. 01-53 Offsite Power 5. FSAR Section 8.3 6. ABN-ELEC-LOOP Loss Of All Off-Site Electrical Power 7. SOP-ELECT-BACKFEED
- 8. NEI 99-01 CU2 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 2 -Loss of Emergency AC Power Major Rev: Draft Minor Rev: N/A Page: 68 of 203 Initiating Condition:
Loss of all offsite and all onsite AC power to emergency buses for 15 minutes or longer EAL: CA2.1 Alert Loss of 211 offsite and all onsite AC power capability to emergency buses SM-7 and SM-8 for GE 15 min. (Note 1) Note 1 : The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I 4 I s I def I Basis: This cold condition EAL is equivalent to the hot condition EAL MS 1.1. This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control , spent fuel heat removal and the ultimate heat sink. When in the cold shutdown, Refuel, or defueled mode, this condition is not classified as a Site Area Emergency because of the increased time available to restore an emergency bus to service. Additional time is available due to the reduced core decay heat load, and the lower temperatures and pressures in various plant systems. Thus, when in these modes, this condition represents an actual or potential substantial degradation of the level of safety of the plant. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via IC CS1 or RS1. CGS Basis Reference(s):
- 1. FSAR Figure 8.1-2.1 Main One-Line Diagram -Main Buses 2. FSAR Figure 8.1-2.2 Main One-Line Diagram -Emergency Buses 3. FSAR Section 8.2 4. 01-53 Offsite Power 5. FSAR Section 8.3 6. ABN-ELEC-LOOP Loss Of All Off-Site Electrical Power 7. SOP-ELECT-BACKFEED
- 8. NEI 99-01 CA2 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 3 -RCS Temperature UNPLANNED increase in RCS temperature CU3.1 Unusual Event UNPLANNED increase in RCS temperature to GT 200°F Mode Applicability:
Basis: Major Rev: Draft Minor Rev: N/A Page: 69 of 203 In the absence of reliable RCS temperature indication caused by a loss of decay heat removal capability, classification should be based on EAL CU3.2 should RCS level indication be subsequently lost. The Technical Specification cold shutdown temperature limit is 200°F (ref. 1 ). This IC addresses an UNPLANNED increase in RCS temperature above the Technical Specification cold shutdown temperature limit and represents a potential degradation of the level of safety of the plant. If the RCS is not intact and CONTAINMENT CLOSURE is not established during this event, the Emergency Director should also refer to IC CA3. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification.
This EAL involves a loss of decay heat removal capability, or an addition of heat to the RCS in excess of that which can currently be removed, such that reactor coolant temperature cannot be maintained below the cold shutdown temperature limit specified in Technical Specifications.
During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of Power Operations.
During an outage, the level in the reactor vessel will normally be maintained at or above the reactor vessel flange. Refuel evolutions that lower water level below the reactor vessel flange are carefully planned and controlled.
A loss of forced decay heat removal at reduced inventory may result in a rapid increase in reactor coolant temperature depending on the time after shutdown.
Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation to Alert would be via IC CA 1 based on an inventory loss or IC CA3 based on exceeding plant configuration-specific time criteria.
CGS Basis Reference(s):
- 1. Technical Specifications Table 1.1-1 2. NEI 99-01 CU3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 3-RCS Temperature UNPLANNED increase in RCS temperature CU3.2 Unusual Event Loss of fill RCS temperature and RPV water level indication for GE 15 min. (Note 1) Major Rev: Draft Minor Rev: N/A Page: 70 of 203 Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I 4 I s Basis: Recirculation suction temperature, RRC-TR-650 pt 1 (2), is the primary temperature measurement instrument when RPV pressure is less than 100 psig and the associated RRC pump is operating.
Monitoring of the RWCU bottom head drain temperature element, RWCU-TE-21, as read on Tl-607 pt 5 (H13 P602) or MS-TR-6 pt 316 (RB 522) is acceptable only if a RRC pump is operating for forced flow and RWCU flow of greater than 50 gpm exists. (ref. 4) With flow through the RHR Heat Exchanger, the inlet temperature (TDAS pt. X045) is indicative of RRC system temperature.
If adequate core flow cannot be provided, RPV metal temperature can be monitored on MS-TR-6. (ref. 5) This EAL addresses the inability to determine RCS temperature and RPV level, and represents a potential degradation of the level of safety of the plant. If the RCS is not intact and CONT Al NMENT CLOSURE is not established during this event, the Emergency Director should also refer to IC CA3. This EAL reflects a condition where there has been a significant loss of instrumentation capability necessary to monitor RCS conditions and operators would be unable to monitor key parameters necessary to assure core decay heat removal. During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of Power Operations.
Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation to Alert would be via IC CA 1 based on an inventory loss or IC CA3 based on exceeding plant configuration-specific time criteria.
CGS Basis Reference(s):
- 1. FSAR Table 7.5-1 2. FSAR Figure 7.7-1 3. FSAR Section 7.6.1.3 4. OSP-RCS-C102 RPV Non-Critical Cooldown Surveillance
- 5. SOP-RHR-SDC RHR Shutdown Cooling 6. NEI 99-01 CU3 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: CA3.1 Alert ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 3 -RCS Temperature Inability to maintain the plant in cold shutdown Page: 71 of 203 UNPLANNED increase in RCS temperature to GT 200°F for GT Table 7 duration (Note 1) OR UNPLANNED RPV pressure increase GT 10 psig Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Table 7 RCS Heat-up Duration Thresholds RCS Status CONTAINMENT CLOSURE Heat-up Duration Status Intact N/A 60 min.* established 20 min.* Not intact not established 0 min.
- If an RCS heat removal system is in operation within this time frame and RCS temperature is being reduced, the EAL is not applicable.
Mode Applicability:
I 4 I s Basis: 200°F is the Technical Specification cold shutdown temperature limit (ref. 1 ). 10 psi is one-half of the 20 psi minor division on the Wide Range RPV pressure instrument, RFW-Pl-605, on Main Control Room Panel H13-P603 (ref. 2). This instrument has a range of 0 to 1200 psig. This RPV pressure indication is also displayed on plant computer point 8016 (ref. 3). Recirculation suction temperature, RRC TR 650 pt 1 (2), is the primary temperature measurement instrument when RPV pressure is less than 100 psig and the associated RRC pump is operating.
Monitoring of the RWCU bottom head drain temperature element, RWCU TE 21, as read on RWCU Tl 607 pt 5 (H13 P602) or MS TR 6 pt 316 (RB 522) is acceptable only if a RRC pump is operating for forced flow and RWCU flow of greater than 50 gpm exists. (ref. 4) With flow through the RHR Heat Exchanger, the inlet temperature (TDAS pt. X045) is indicative of RRC system temperature.
If adequate core flow cannot be provided, RPV metal temperature can be monitored on MS TR 6. (ref. 5) The RCS should be considered intact when the RCS pressure boundary is in its normal condition for the cold shutdown mode of operation (e.g., no freeze seals or nozzle dams).
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 72 of 203 ATTACHMENT 7.1: EAL Technical Bases This IC addresses conditions involving a loss of decay heat removal capability or an addition of heat to the RCS in excess of that which can currently be removed. Either condition represents an actual or potential substantial degradation of the level of safety of the plant. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification.
The RCS Heat-up Duration Thresholds table addresses an increase in RCS temperature when CONTAINMENT CLOSURE is established but the RCS is not intact.. The 20-minute criterion was included to allow time for operator action to address the temperature increase.
The RCS Heat-up Duration Thresholds table also addresses an increase in RCS temperature with the RCS intact. The status of CONTAINMENT CLOSURE is not crucial in this condition since the intact RCS is providing a high pressure barrier to a fission product release. The 60-minute time frame should allow sufficient time to address the temperature increase without a substantial degradation in plant safety. Finally, in the case where there is an increase in RCS temperature, the RCS is not intact , and CONTAINMENT CLOSURE is not established, no heat-up duration is allowed (i.e., 0 minutes).
This is because 1) the evaporated reactor coolant may be released directly into the Containment atmosphere and subsequently to the environment, and 2) there is reduced reactor coolant inventory above the top of irradiated fuel. The RCS pressure increase threshold provides a pressure-based indication of RCS heat-up in the absence of RCS temperature monitoring capability.
Escalation of the emergency classification level would be via IC CS1 or RS1. CGS Basis Reference(s):
- 1. Technical Specifications Table 1.1-1 2. Instrument Master Datasheet for EPN RFW-Pl-605
- 3. PPM 10.27.36 Reactor Pressure High Alarm -CC 4. OSP-RCS-C102 RPV Non-Critical Cooldown Surveillance
- 5. SOP-RHR-SDC RHR Shutdown Cooling 6. NEI 99-01 CA3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 4 -Loss of Vital DC Power Loss of vital DC power for 15 minutes or longer CU4.1 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 73 of 203 Indicated voltage LT 108 VDC on required 125 VDC buses DP-S1-1 and DP-S1-2 for GE 15 min. (Note 1) Note 1 : The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability: 4 5 Basis: The 125 VDC Class 1 E DC power system consists of three electrically independent and separate distribution systems (S1-1, S1-2, and S1-HPCS).
S1-HPCS is not included in this EAL. Each DC distribution system has a battery and a battery charger that are normally connected to the bus such that these two sources of power are operating in parallel.
The charger is normally supplying system electrical loads with the battery on a float charge. Each battery has the necessary amp-hour discharge capacity to sustain system loads for a minimum of two hours. This capacity is specifically for a loss of power to the charger coincident with a design basis accident.
The batteries have capacity to carry design load at 60°F without decreasing battery voltage below 1.81 volts/cell (or 108 VDC, ref. 1) with loss of output from the battery chargers during the specified period. Battery capacity is sufficient to provide starting currents while operating at full load. (ref. 2) This EAL is the cold condition equivalent of the hot condition loss of DC power EAL MS2.1. This IC addresses a loss of essential DC power which compromises the ability to monitor and control operable SAFETY SYSTEMS when the plant is in the cold shutdown or Refuel mode. In these modes, the core decay heat load has been significantly reduced, and coolant system temperatures and pressures are lower; these conditions increase the time available to restore a vital DC bus to service. Thus, this condition is considered to be a potential degradation of the level of safety of the plant. As used in this EAL, "required" means the essential DC buses necessary to support operation of the service, or operable, train or trains of SAFETY SYSTEM equipment.
For example, if Division I is service (inoperable) for scheduled outage maintenance work and Division II is in-service (operable}, then a loss of essential DC power affecting Division II would require the declaration of an Unusual Event. A loss of essential DC power to Division I would not warrant an emergency classification.
Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Depending upon the event, escalation of the emergency classification level would be via IC CA 1 or CA3, or an IC in Recognition Category R. CGS Basis Reference(s):
- 1. Calculation No. 2.05.01 Battery Sizing, Voltage Drop, and Charger Studies for Div. 1 & 2 Systems 2. FSAR Section 8.3.2 3. NEI 99-01 CU4 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Category:
Subcategory:
C -Cold Shutdown I Refuel System Malfunction 5 -Loss of Communications Initiating Condition:
Loss of all onsite or offsite communications capabilities EAL: CU5.1 Unusual Event (1) Loss of all Table 4 onsite communication methods OR (2) Loss of all Table 4 ORO communication methods OR (3) Loss of .9l! Table 4 NRC communication methods Table 4 Communication Methods System Onsite ORO Plant Public Address (PA) System x Plant Telephone System x x Plant Radio System Operations and x Security Channels Offsite calling capability from the Control x Room via direct telephone Long distance calling capability on the x commercial phone system Mode Applicability:
I I I 4 I s I det I Basis: Major Rev: Draft Minor Rev: N/A Page: 7 4 of 203 NRC x x Onsite and offsite (ORO and NRC) communications include one or more of the systems listed in Table 4 (ref. 1, 2). Public Address (PA} System The public address system provides a way of contacting personnel in the various buildings of the plant and locations of the site that might be inaccessible using other means of communication.
The wide alarm system alerts (via the public address system speakers) operating personnel to fire hazards and other trouble conditions for which plant management finds it necessary to alert plant personnel.
Plant Telephone System This system consists of interconnections to the public telephone network (and trunks to the PBX) with individual direct lines that provide inward and outward dialing access to most plant locations.
Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 75 of 203 ATTACHMENT 7.1: EAL Technical Bases Plant Radio System Operations and Security Channels The radio communications system is used for communications with personnel involved in maintenance and security in and around the plant complex by means of hand-held portable radio units, mobile radio units, and paging receivers.
The telephone link to BPA provides a direct communication link to the BPA Dittmer Control Center. The radio communications system provides a communications link for security and emergency communications to local law enforcement agencies and emergency control centers. Offsite calling capability from the Control Room via direct telephone and fax lines This communications method includes following dedicated phone networks that are available for emergency communications in addition to the normal Energy Northwest phone network:
- Energy Northwest Emergency Center Network
- Response Agency Network
- NRC Emergency Notification System Various locations such as the Control Room, Technical Support Center, Emergency Operations Facility, Joint Information Center, Department of Energy-RL, Washington State Emergency Operations Center, Oregon State Emergency Coordination Center and the Benton and Franklin County Emergency Operations Centers have facsimile transceivers.
The facsimile transceivers enable the transmission and receipt of printed material.
The facsimile system which connects the Energy Northwest emergency centers with the county and state emergency centers uses dedicated phone lines. Long distance calling capability on the commercial phone system The Energy Northwest Richland phone system is a computer based, software controlled telephone exchange (Computerized Branch Exchange).
It is equipped with redundant computerized processor units and is served by an uninterruptible power supply. The direct-dial private telephone system provides communication between the Energy Northwest facilities.
The phone system is arranged such that plant telephones can reach other Energy Northwest facilities by direct-dialing and without the need of an operator.
This EAL is the cold condition equivalent of the hot condition EAL MU7.1. This IC addresses a significant loss of on-site or offsite communications capabilities.
While not a direct challenge to plant or personnel safety, this event warrants prompt notifications to OROs and the NRC. This IC should be assessed only when extraordinary means are being utilized to make communications possible (e.g., use of non-plant, privately owned equipment, relaying of on-site information via individuals or multiple radio transmission points, individuals being sent to offsite locations, etc.). The first EAL condition addresses a total loss of the communications methods used in support of routine plant operations.
The second EAL condition addresses a total loss of the communications methods used to notify all OROs of an emergency declaration.
The OROs referred to here are Washington Stare, Benton County, Franklin County and DOE RL. The third EAL addresses a total loss of the communications methods used to notify the NRC of an emergency declaration.
CGS Basis Reference(s):
- 1. Emergency Plan Section 6.6 2. FSAR Section 9.5.2 3. NEI 99-01 CU5 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases C -Cold Shutdown I Refuel System Malfunction 6 -Hazardous Event Affecting Safety Systems Major Rev: Draft Minor Rev: N/A Page: 76 of 203 Initiating Condition:
Hazardous event affecting SAFETY SYSTEMS needed for the current operating mode EAL: CA6.1 Alert The occurrence of any Table 8 hazardous event AND Event damage has caused indications of degraded performance on one train of a SAFETY SYSTEM needed for the current operating mode AND EITHER: Event damage has caused indications of degraded performance to a second train of a SAFETY SYSTEM needed for the current operating mode OR Event damage has resulted in VISIBLE DAMAGE to a second train of a SAFETY SYSTEM needed for the current operating mode (Notes 9, 10) Note 9: If the affected SAFETY SYSTEM train was already inoperable or out of service before the hazardous event occurred, then emergency classification is not warranted.
Note 10: If the hazardous event only resulted in VISIBLE DAMAGE, with no indications of degraded performance to at least one train of a SAFETY SYSTEM, then this emergency classification is not warranted. Table 8 Hazardous Events
- Seismic event
- Internal or external FLOODING event
- Tornado strike
- FIRE
- EXPLOSION
- Volcanic ash fallout
- Other events with similar hazard characteristics as determined by the Shift Manager Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 77 of 203 ATTACHMENT 7.1: EAL Technical Bases Mode Applicability:
I I 4 I s Basis: This IC addresses a hazardous event that causes damage to SAFETY SYSTEMS needed for the current operating mode. In order to provide the appropriate context for consideration of an ALERT classification, the hazardous event must have caused indications of degraded SAFETY
- SYSTEM performance in one train, and there must be either indications of performance issues with the second SAFETY SYSTEM train or VISIBLE DAMAGE to the second train such that the potential exists for this second SAFETY SYSTEM train to have performance issues. In other words, in order for this EAL to be classified, the hazardous event must occur, at least one SAFETY SYSTEM train must have indications of degraded performance, and the second SAFETY SYSTEM train must have indications of degraded performance or VISIBLE DAMAGE such that the potential exists for performance issues. Note that this second SAFETY SYSTEM train is from the same SAFETY SYSTEM that has indications of degraded performance; commercial nuclear power plants are designed to be able to support single system issues without compromising public health and safety from radiological events. Indications of degraded performance addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available.
The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. VISIBLE DAMAGE addresses damage to a SAFETY SYSTEM train that is not in service/operation and that potentially could cause performance issues. Operators will make this determination based on the totality of available event and damage report information.
This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. This VISIBLE DAMAGE should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. The significance of a seismic event is discussed under EAL HU2.1 (ref. 1 ). Internal FLOODING may be caused by events such as component failures, equipment misalignment, or outage activity mishaps (ref. 2). Seismic Category I structures are analyzed to withstand a sustained, design wind velocity of at least 100 mph (ref. 3). Areas containing functions and systems required for safe shutdown of the plant are identified by Fire Areas in the fire response procedure (ref. 4). The potential for volcanic eruption exists in the Pacific Northwest.
Heavy ash fall, such as that experienced at certain locations following the eruption of Mt. St. Helens in 1980, could affect operation of plant equipment if precautionary measures are not taken. The design basis ash fall is projected for a twenty hour duration. (ref. 5) Table 5 provides a list of CGS safety system areas (ref. 6). Escalation of the emergency classification level would be via IC CS1 or RS1. CGS Basis Reference(s):
- 1. FSAR Section 3.7 Seismic Design Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 78 of 203 ATTACHMENT 7.1: EAL Technical Bases 2. FSAR Section 3.4.1 Flood Protection
- 3. CGS Calculation CALC CE-02-93-16 Evaluate PMR/BDC 98-0131-0A change from 5 min. to 15 min. averaging of 33 ft. elev. met twr. wind speeds for UE and Alert declarations
- 4. ABN-FIRE Attachment 13.2, Fire Areas 5. ABN-ASH Ash Fall 6. FSAR Table 3.2-1 Equipment Classification
- 7. NEI 99-01 CA6 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 79 of 203 ATTACHMENT 7.1: EAL Technical Bases Category H -Hazards and Other Conditions Affecting Plant Safety EAL Group: ANY (EALs in this category are applicable to any plant condition, hot or cold.) Hazards are non-plant, system-related events that can directly or indirectly affect plant operation, reactor plant safety or personnel safety. 1. Security Unauthorized entry attempts into the Protected Area, bomb threats, sabotage attempts, and actual security compromises threatening loss of physical control of the plant. 2. Seismic Event Natural events such as earthquakes have potential to cause plant structure or equipment damage of sufficient magnitude to threaten personnel or plant safety. 3. Natural or Technology Hazard Other natural and non-naturally occurring events that can cause damage to plant facilities include tornados, FLOODING, hazardous material releases and events restricting site access warranting classification.
- 4. Fire Fires can pose significant hazards to personnel and reactor safety. Appropriate for classification are fires within the site Protected Area or which may affect operability of equipment needed for safe shutdown 5. Hazardous Gas Toxic, corrosive, asphyxiant or flammable gas leaks can affect normal plant operations or preclude access to plant areas required to safely shutdown the plant. 6. Control Room Evacuation If the Control Room must be evacuated, additional support for monitoring and controlling plant functions is necessary through the emergency response facilities.
- 7. Emergency Director Judgment The EALs defined in other categories specify the predetermined symptoms or events that are indicative of emergency or potential emergency conditions and thus warrant classification.
While these EALs have been developed to address the full spectrum of possible emergency conditions which may warrant classification and subsequent implementation of the Emergency Plan, a provision for classification of emergencies based on operator/management experience and judgment is still necessary.
The EALs of this category provide the Emergency Director the latitude to classify emergency conditions consistent with the established classification criteria based upon Emergency Director judgment.
Number: 13.1.1A J Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 80 of 203 ATTACHMENT 7.1: EAL Technical Bases Category: H -Hazards Subcategory: 1 -Security Initiating Condition:
Confirmed SECURITY CONDITION or threat EAL: HU1 .1 Unusual Event (1) A SECURITY CONDITION that does not involve a HOSTILE ACTION as reported by the Security Sergeant or Security Lieutenant OR (2) Notification of a credible security threat directed at the site OR (3) A validated notification from the NRC providing information of an aircraft threat Mode Applicability:
I 1 I 2 I 3 I 4 I s I def I Basis: The Security Shift Supervision is defined as either the Security Lieutenant or the Security Sergeant (ref. 1 ). This EAL is based on the CGS Physical Security Plan (ref. 1 ). The Safeguards Contingency Plan (Appendix C of CGS Physical Security Plan) defines the events that meet the criteria of a SECURITY CONDITION or HOSTILE ACTION (ref. 1 ). This IC addresses events that pose a threat to plant personnel or SAFETY SYSTEM equipment, and thus represent a potential degradation in the level of plant safety. Security events which do not meet one of these EALs are adequately addressed by the requirements of 10 CFR § 73. 71 or 10 CFR § 50.72. Security events assessed as HOSTILE ACTIONS are classifiable under ICs HA1 and HS1. Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Classification of these events will initiate appropriate threat-related notifications to plant personnel and Offsite Response Organizations.
Security plans and terminology are based on the guidance provided by NEI 03-12, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program].
Threshold
- 1 references the Security Shift Supervision because these are the individuals trained to confirm that a security event is occurring or has occurred.
Training on security event confirmation and classification is controlled due to the nature of Safeguards and 10 CFR § 2.39 information.
Threshold
- 2 addresses the receipt of a credible security threat. The credibility of the threat is assessed in accordance with the CGS Physical Security Plan (ref. 1 ). Threshold
- 3 addresses the threat from the impact of an aircraft on the plant. The NRC Headquarters Operations Officer (HOO) will communicate to the licensee if the threat involves an aircraft.
The status and size of the plane may also be provided by NORAD through the NRC. Validation of the threat is performed in accordance with ABN-AIRBORNE-ATTACK (ref. 2). Emergency plans and implementing procedures are public documents; therefore, EALs should not Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 81 of 203 ATTACHMENT 7.1: EAL Technical Bases incorporate Security-sensitive information.
This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location. sensitive information should be contained in non-public documents such as the CGS Physical Security Plan (ref. 1 ). Escalation of the emergency classification level would be via IC HA 1. CGS Basis Reference(s):
- 1. CGS Physical Security Plan 2. ABN-AIRBORNE-ATTACK
- 2. NEI 99-01 HU1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 82 of 203 Category:
Subcategory:
Initiating Condition:
EAL: HA1.1 Alert ATTACHMENT 7.1: EAL Technical Bases H-Hazards 1 -Security HOSTILE ACTION within the OWNER CONTROLLED AREA or airborne attack threat within 30 minutes (1) A HOSTILE ACTION is occurring or has occurred within the OWNER CONTROLLED AREA as reported by the Security Sergeant or Security Lieutenant OR (2) A validated notification from NRC of an aircraft attack threat within 30 min. of the site Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The Security Shift Supervision is defined as either the Security Lieutenant or the Security Sergeant (ref. 1 ). Note that the ISFSI Protected Area is an area separate from the Protected Area surrounding the power block. The Safeguards Contingency Plan (Appendix C of CGS Physical Security Plan) defines the events that meet the criteria of a SECURITY CONDITION or HOSTILE ACTION (ref. 1 ). This IC addresses the occurrence of a HOSTILE ACTION within the OWNER CONTROLLED AREA or notification of an aircraft attack threat. This event will require rapid response and assistance due to the possibility of the attack progressing to the PROTECTED AREA, or the need to prepare the plant and staff for a potential aircraft impact. Timely and accurate communications between the Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Security plans and terminology are based on the guidance provided by NEI 03-12, Template for the Security Plan, Training and Qualification Plan , Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program].
As time and conditions allow, these events require a heightened state of readiness by the plant staff and implementation of onsite protective measures (e.g., evacuation, dispersal or sheltering).
The Alert declaration will also he i ghten the awareness of Offsite Response Organizations (OROs), allowing them to be better prepared should it be necessary to consider further actions. This IC does not apply to incidents that are accidental events, acts of civil disobedience, or otherwise are not a HOSTILE ACTION perpetrated by a HOSTILE FORCE. Examples include the crash of a small aircraft, shots from hunters, physical disputes between employees , etc. Reporting of these types of events is adequately addressed by other EALs, o r the requirements of 10 CFR § 73. 71 or 1 O CFR § 50.72. Threshold
- 1 is applicable for any HOSTILE ACTION occurring, or that has occurred, in the OWNER CONTROLLED AREA. This includes any action directed against the ISFSI which is located outside the plant PROTECTED AREA.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY-TECHNICAL BASES Page: 83 of 203 ATTACHMENT 7.1: EAL Technical Bases Threshold
- 2 addresses the threat from the impact of an aircraft on the plant, and the anticipated arrival time is within 30 minutes. The intent of this EAL is to ensure that threat-related notifications are made in a timely manner so that plant personnel and OROs are in a heightened state of readiness.
This EAL is met when the threat-related information has been validated in accordance with ATTACK (ref 2) s. The NRC Headquarters Operations Officer (HOO) will communicate to the licensee if the threat involves an aircraft.
The status and size of the plane may be provided by NORAD through the NRC. In some cases, it may not be readily apparent if an aircraft impact within the OWNER CONTROLLED AREA was intentional (i.e., a HOSTILE ACTION). It is expected, although not certain, that notification by an appropriate Federal agency to the site would clarify this point. In this case, the appropriate federal agency is intended to be NORAD , FBI, FM or NRC. The emergency declaration, including one based on other ICs/EALs, should not be unduly delayed while awaiting notification by a Federal agency. Emergency plans and implementing procedures are public documents; therefore, EALs should not incorporate Security-sensitive information.
This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location. sensitive information should be contained in non-public documents such as the CGS Physical Security Plan (ref. 1 ). CGS Basis Reference(s):
- 1. CGS Physical Security Plan 2. ABN-AIRBORNE-ATTACK
- 2. NEI 99-01 HA 1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 84 of 203 ATTACHMENT 7.1: EAL Technical Bases Category: H -Hazards Subcategory: 1 -Security Initiating Condition:
HOSTILE ACTION within the Protected Area EAL: HS1.1 Site Area Emergency A HOSTILE ACTION is occurring or has occurred within the PROTECTED AREA as reported by the Security Sergeant or Security Lieutenant Mode Applicability:
I 1 I 2 I 3 I 4 I s I def I Basis: The Security Shift Supervision is defined as either the Security Lieutenant or the Security Sergeant (ref. 1 ). Note that the ISFSI Protected Area is an area separate from the Protected Area surrounding the power block. The Safeguards Contingency Plan (Appendix C of CGS Physical Security Plan) defines the events that meet the criteria of a SECURITY CONDITION or HOSTILE ACTION (ref. 1 ). This IC addresses the occurrence of a HOSTILE ACTION within the PROTECTED AREA. This event will require rapid response and assistance due to the possibility for damage to plant equipment.
Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Security plans and terminology are based on the guidance provided by NEI 03-12, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program].
As time and conditions allow, these events require a heightened state of readiness by the plant staff and implementation of onsite protective measures (e.g., evacuation, dispersal or sheltering).
The Site Area Emergency declaration will mobilize Offsite Response Organization (ORO) resources and have them available to develop and implement public protective actions in the unlikely event that the attack is successful in impairing multiple safety functions.
This IC does not apply to a HOSTILE ACTION directed at an ISFSI PROTECTED AREA located outside the plant PROTECTED AREA; such an attack should be assessed using IC HA 1. It also does not apply to incidents that are accidental events, acts of civil disobedience, or otherwise are not a HOSTILE ACTION perpetrated by a HOSTILE FORCE. Examples include the crash of a small aircraft, shots from hunters, physical disputes between employees, etc. Reporting of these types of events is adequately addressed by other EALs, or the requirements of 10 CFR § 73.71 or 10 CFR § 50.72. Emergency plans and implementing procedures are public documents; therefore, EALs should not incorporate Security-sensitive information.
This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location. sensitive information should be contained in non-public documents such as the CGS Physical Security Plan (ref. 1 ). CGS Basis Reference(s):
- 1. CGS Physical Security Plan Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 85 of 203 ATTACHMENT 7.1: EAL Technical Bases 2. NEI 99-01 HS1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 2 -Seismic Event Seismic event GT OBE levels HU2.1 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 86 of 203 Seismic event GT Operating Bas i s Earthquake (OBE) as indicated by H13.P851.S1
.5-1 (OPERATING BASIS EARTHQUAKE EXCEEDED) activated Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: CGS seismic instrumentation consists of a Kinemetrics SMA-3 Strong Motion Accelerograph and assoc i ated sensors that are equipped with seismic triggers set to initiate recording at an acceleration equal to or exceeding 0.01 g (ref. 1 , 2). This also annunciates the seismic activity alarm H13.P851.S1.2-5 Minimum Seismic Earthquake Exceeded (ref. 2, 3, 4). A seismic switch unit that is similar to the seismic trigger unit is also prov i ded. The trip point of the seismic switch unit is set at the maximum acceleration corresponding to the OBE , and it provides immediate Control Room annunciation that the OBE has been exceeded requiring declaration of an Unusual Event (ref. 1, 3, 4) This IC addresses a seism i c event that results in accelerations at the plant site greater than those specified for an Operating Basis Earthquake (OBE). An earthquake grea t er than an OBE but less than a Safe Shutdown Earthquake (SSE) should have no sign i ficant impact on safety-related systems, structures and components
- however, some time may be required for the plant staff to ascertain the actual post-event condition of the plant (e.g., performs walk-downs and post-event inspections).
Given the time necessary to perform walk-downs and inspections , and fully understand any impacts , t his event represents a potential degradation of the level of safety of the plant. Event ver i fication with external sources should not be necessary during or following an OBE. Earthquakes of this magnitude should be readily felt by on-site personnel and recognized as a seismic event (e.g., lateral accelerations in excess of 0.08g). The Sh i ft Manager or Emergency may seek external verification if deemed appropriate (e.g., a call to the USGS, check internet news sources , etc.); however, the verification action must not preclude a timely emergency decla r ation. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA8. CGS Basis Reference(s):
- 2. ISP-SEIS-M20 1 Seismic Systems Channel Check 3. PPM 4.851.S1 .2-5 Minimum Se i smic Earthquake Exceeded 4. ABN-E AR T HQUAK E Ea rthqu a k e 5. NEI 99-01 HU2 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 3 -Natural or Technology Hazard Hazardous event HU3.1 Unusual Event (1) A tornado strike within the PROTECTED AREA OR (2) Volcanic ash fallout requiring plant shutdown Mode Applicability:
I 1 I 2 I 3 I 4 I s I def I Basis: Major Rev: Draft Minor Rev: N/A Page: 87 of 203 If damage is confirmed visually or by other in-plant indications, the event may be escalated to an Alert under EAL CA6.1 or MA8.1. Threshold
- 1 A tornado striking (touching down) within the PROTECTED AREA warrants declaration of an Unusual Event regardless of the measured wind speed at the meteorological tower. A tornado is defined as a violently rotating column of air in contact with the ground and extending from the base of a thunderstorm.
A dust devil is not a tornado. Threshold
- 2 The potential for volcanic eruption exists in the Pacific Northwest.
Heavy ash fall, such as that experienced at certain locations following the eruption of Mt. St. Helens in 1980, could affect operation of plant equipment if precautionary measures are not taken. The design basis ash fall is projected for a 20 hour2.314815e-4 days <br />0.00556 hours <br />3.306878e-5 weeks <br />7.61e-6 months <br /> duration.
Plant shutdown may be warranted, based on several individual criteria specified in ABN-ASH (ref. 1 ). This threshold is met when ABN-ASH requires plant shutdown.
This IC addresses hazardous events that are considered to represent a potential degradation of the level of safety of the plant. Threshold
- 1 addresses a tornado striking (touching down) within the PROTECTED AREA. Threshold
- 2 addresses a volcanic ash fallout event. Escalation of the emergency classification level would be based on ICs in Recognition Categories R, F, M orC. CGS Basis Reference(s):
- 1. ABN-ASH Ash Fall 2. NEI 99-01 HU3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY -TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 3 -Natural or Technology Hazard Hazardous event HU3.2 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 88 of 203 Internal room or area FLOODING of a magnitude sufficient to require manual or automatic electrical isolation of a SAFETY SYSTEM component needed for the current operating mode Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: An uncontrolled flooding event may pose a direct threat to safety-related equipment.
As such, the potential exists for substantial degradation of the level of safety of the plant. One indication of FLOODING is indicated by ECCS room level alarms on P601 (ref. 1, 2). This IC addresses hazardous events that are considered to represent a potential degradation of the level of safety of the plant. This EAL addresses FLOODING of a building room or area that results in operators isolating power to a SAFETY SYSTEM component due to water level or other wetting concerns.
Classification is also required if the water level or related wetting causes an automatic isolation of a SAFETY SYSTEM component from its power source (e.g., a breaker or relay trip). To warrant classification, operability of the affected component must be required by Technical Specifications for the current operating mode. Escalation of the emergency classification level would be based on I Cs in Recognition Categories R, F, M orC. CGS Basis Reference(s):
- 1. Calculation ME 02-02-02 Reactor Building Flooding 2. Calculation ME 02-02-46, RB/RW/TB/DG Corridor Flooding 3. NEI 99-01 HU3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 3 -Natural or Technology Hazard Hazardous event HU3.3 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 89 of 203 (1) Movement of personnel within the PROTECTED AREA is IMPEDED due to an offsite event involving hazardous materials (e.g., an offsite chemical spill, 618-11 event or toxic gas release) OR (2) A hazardous event that results in on-site conditions sufficient to prohibit the plant staff from accessing the site via personal vehicles (Note 7) Note 7: This EAL does not apply to routine traffic impediments such as fog, snow, ice, or vehicle breakdowns or accidents Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: As used here, the term "offsite" is meant to be areas external to the PROTECTED AREA. Threshold
- 1 includes an event at the 618-11 burial ground which would IMPEDE movement of personnel within the PROTECTED AREA. Threshold
- 2 includes a range fire causing Hanford officials to limit vehicle access to the site. The origin of the hazardous event could be from on or off-site.
This IC addresses hazardous events that are considered to represent a potential degradation of the level of safety of the plant. Threshold
- 1 addresses a hazardous materials event originating at an offsite location and of sufficient magnitude to impede the movement of personnel within the PROTECTED AREA. Threshold
- 2 addresses a hazardous event that causes an on-site impediment to vehicle movement and significant enough to prohibit the plant staff from accessing the site using personal vehicles.
Examples of such an event include site flooding caused by a hurricane, heavy rains, up-river water releases, dam failure, etc., or an on-site train derailment blocking the access road. This EAL is not intended apply to routine impediments such as fog, snow, ice, or vehicle breakdowns or accidents, but rather to more significant conditions such as the Hurricane Andrew strike on Turkey Point in 1992, the flooding around the Cooper Station during the Midwest floods of 1993, or the flooding around Ft. Calhoun Station in 2011. Escalation of the emergency classification level would be based on I Cs in Recognition Categories R, F, M orC. CGS Basis Reference{s):
- 1. NEI 99-01 HU3 Number: 13.1.1A Title: CLASSIFYING THE EMERGENCY -TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 4-Fire FIRE potentially degrading the level of safety of the plant HU4.1 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 90 of 203 A FIRE is not extinguished within 15 min. of any of the following FIRE detection indications (Note 1 ):
- Report from the field (i.e., visual observation)
- Receipt of multiple (more than 1) fire alarms or indications
- Field verification of a single fire alarm AND The FIRE is located within any Table 5 area Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Table 5 Safe Shutdown Areas
- Vital portions of the Rad Waste/Control Building:
467' elevation vital island 487' elevation cable spreading room Main Control Room and vertical cable chase 525' elevation HVAC area
- Reactor Building
- Vital portions of the Turbine Building DEH pressure switches RPS switches on turbine throttle valves Main steam line radiation monitors Turbine Building ventilation radiation monitors Main steam line piping up to MS-V-146 and the first stop valves
- Standby Service Water Pump Houses
- Diesel Generator Building 1 2 3 4 s I def I Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 91 of 203 ATTACHMENT 7.1: EAL Technical Bases Basis: A fire alarm can be confirmed by multiple/redundant indications such as additional alarms on FCP-1 or FCP-2, fire pumps starting, fire suppression system discharge, fire water header pressure fluctuations or by notification by plant personnel (ref. 1 ). The Table 5 Safe Shutdown Areas include those structures/areas that contain any Class 1, 2 or 3 SSC. Table 5 includes those structures containing functions and systems required to achieve and maintain cold shutdown (including all auxiliary equipment such as AC/DC power, cooling water and instrumentation) (ref. 2). The concept of this EAL is that a fire exists in a Table 5 area that is not extinguished within 15 minutes. This IC addresses the magnitude and extent of FIRES that may be indicative of a potential degradation of the level of safety of the plant. For EAL HU4.1 the intent of the 15-minute duration is to size the FIRE and to discriminate against small FIRES that are readily extinguished (e.g., smoldering waste paper basket). In addition to alarms, other indications of a FIRE could be a drop in fire main pressure, automatic activation of a suppression system, etc. Upon receipt, operators will take prompt actions to confirm the validity of an initial fire alarm, indication, or report. For EAL assessment purposes, the emergency declaration clock starts at the time that the initial alarms, indications, or report was received, and not the time that a subsequent verification action was performed.
Similarly, the fire duration clock also starts at the time of receipt of the initial alarms, indications or report. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA8. CGS Basis Reference(s):
- 1. ABN-FIRE 2. FSAR Table 3.2-1 Equipment Classification
- 3. NEI 99-01 HU4 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 4-Fire FIRE potentially degrading the level of safety of the plant HU4.2 Unusual Event Receipt of a single fire alarm (i.e., no other indications of a FIRE) AND The fire alarm is indicating a FIRE within any Table 5 area AND The existence of a FIRE is not verified within 30 min. of alarm receipt (Note 1) Major Rev: Draft Minor Rev: N/A Page: 92 of 203 Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Table 5 Safe Shutdown Areas
- Vital portions of the Rad Waste/Control Building:
467' elevation vital island 487' elevation cable spreading room Main Control Room and vertical cable chase 525' elevation HVAC area
- Reactor Building
- Vital portions of the Turbine Building DEH pressure switches RPS switches on turbine throttle valves Main steam line radiation monitors Turbine Building ventilation radiation monitors Main steam line piping up to MS-V-146 and the first stop valves
- Standby Service Water Pump Houses
- Diesel Generator Building 1 2 3 4 I 5 I det I Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 93 of 203 ATTACHMENT 7.1: EAL Technical Bases Basis: The 30 minute requirement begins upon receipt of a single valid fire detection system alarm. The alarm is to be validated using available Control Room indications or alarms to prove that it is not spurious, or by reports from the field. Actual field reports must be made within the 30 minute time limit or a classification must be made. If a fire is verified to be occurring by field report, classification shall be made based on EAL HU4.1. A single point fire alarm, with no other indications of a fire, may be more indicative of an instrumentation issue rather than a fire in the plant. The concept of this EAL is that there is 30 minutes to determine if a fire exists when only one fire alarm is received. The Table 5 Safe Shutdown Areas include those structures/areas that contain any Class 1, 2 or 3 SSC. Table 5 includes those structures containing functions and systems required to achieve and maintain cold shutdown (including all auxiliary equipment such as AC/DC power, cooling water and instrumentation) (ref. 1 ). This IC addresses the magnitude and extent of FIRES that may be indicative of a potential degradation of the level of safety of the plant. This EAL addresses receipt of a single fire alarm, and the existence of a FIRE is not verified (i.e., proved or disproved) within 30-minutes of the alarm. Upon receipt, operators will take prompt actions to confirm the validity of a single fire alarm. For EAL assessment purposes, the 30-minute clock starts at the time that the initial alarm was received, and not the time that a subsequent verification action was performed. A single fire alarm, absent other indication(s) of a FIRE, may be indicative of equipment failure or a spurious activation, and not an actual FIRE. For this reason, additional time is allowed to verify the validity of the alarm. The 30-minute period is a reasonable amount of time to determine if an actual FIRE exists; however, after that time, and absent information to the contrary, it is assumed that an actual FIRE is in progress.
If an actual FIRE is verified by a report from the field, then HU4.1 is immediately applicable, and the emergency must be declared if the FIRE is not extinguished within 15-minutes of the report. If the alarm is verified to be due to an equipment failure or a spurious activation, and this verification occurs within 30-minutes of the receipt of the alarm, then this EAL is not applicable and no emergency declaration is warranted.
Basis-Related Requirements from Appendix R Appendix R to 10 CFR 50, states in part: Criterion 3 of Appendix A to this part specifies that "Structures, systems, and components important to safety shall be designed and located to minimize, consistent with other safety requirements , the probability and effect of fires and explosions." When considering the effects of fire, those systems associated with achieving and maintaining safe shutdown conditions assume major importance to safety because damage to them can lead to core damage resulting from loss of coolant through boil-off.
Because fire may affect safe shutdown systems and because the loss of function of systems used to mitigate the consequences of design basis accidents under post-fire conditions does not per se impact public safety , the need to limit fire damage to systems required to achieve and Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 94 of 203 ATTACHMENT 7.1: EAL Technical Bases maintain safe shutdown conditions is greater than the need to limit fire damage to those systems required to mitigate the consequences of design basis accidents.
In addition, Appendix R to 10 CFR 50, requires , among other considerations, t he use of 1-hour fire barriers for the enclosure of cable and equipment and associated non-safety circuits of one redundant train (G.2.c). As used in this EAL , the 30-minutes to verify a single alarm is well within this worst-case 1-hour time period. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MAB. CGS Basis Reference(s):
- 1. FSAR Table 3.2-1 Equipment Classification
- 2. NEI 99-01 HU4 Number: 13.1.1A j Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 4-Fire FIRE potentially degrading the level of safety of the plant HU4.3 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 95 of 203 (1) A FIRE within the ISFSI or plant PROTECTED AREA not extinguished within 60 min. of the initial report, alarm or indication (Note 1) OR (2) A FIRE within the ISFSI or plant PROTECTED AREA that requires firefighting support by an offsite fire response agency to extinguish Note 1: The Emergency Director should declare the event promptly upon determining that time l i mit has been exceeded, or will likely be exceeded Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: These thresholds reflect the potential issues that can arise from a fire in other areas of the plant for greater than one-hour or a fire requiring offsite fire department to actively support firefighting efforts because the fire is beyond the capability of the Fire Brigade to extinguish.
Basis: This IC addresses the magnitude and extent of FIRES that may be indicative of a potential degradation of the level of safety of the plant. Threshold
- 1 In addition to a FIRE addressed by EAL HU4.1 or HU4.2, a FIRE within the plant PROTECTED AREA not extinguished within 60-minutes may also potentially degrade the level of plant safety. This basis extends to a FIRE occurring within the PROTECTED AREA of an ISFSI located outside the plant PROTECTED AREA. Threshold
- 2 If a FIRE within the plant or ISFSI PROTECTED AREA is of sufficient size to require a response by an offsite firefighting agency (e.g., a local town Fire Department), then the level of plant safety is potentially degraded.
The dispatch of an offsite firefighting agency to the site requires an emergency declaration only if it is needed to actively support firefighting efforts because the fire is beyond the capability of the Fire Brigade to extinguish.
Declaration is not necessary if the agency resources are placed on by, or supporting post-extinguishment recovery or investigation actions. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA8. CGS Basis Reference(s):
- 1. NEI 99-01 HU4 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 5 -Hazardous Gases Major Rev: Draft Minor Rev: N/A Page: 96 of 203 Initiating Condition:
Gaseous release IMPEDING access to equipment necessary for normal plant operations, cooldown or shutdown EAL: HA5.1 Alert Release of a toxic, corrosive, asphyxiant or flammable gas into any Table 9 rooms or areas AND Entry into the room or area is prohibited or IMPEDED (Note 5) Note 5: If the equipment in the listed room or area was already inoperable or out-of-service before the event occurred, then no emergency classification is warranted Table 9 Safe Operation
& Shutdown Areas Room/Area Mode Applicability RW 467' Radwaste Control Room (RHR flush to RW tanks) 3 RW 467' Vital Island (RHR-V-9 disconnect) 3 RB 422' B RHR Pump Rm (local pump temperatures) 3 RB 454' B RHR Pump Rm (operate RHR-V-85B) 3 Mode Applicability:
I 1 I 2 3 4 s I det I Basis: The list of plant rooms or areas with entry-related mode applicability identified specify those rooms or areas that contain equipment which require a manual/local action as specified in operating procedures used for normal plant operation, cooldown and shutdown.
Rooms or areas in which actions of a contingent or emergency nature would be performed (e.g., an action to address an off-normal or emergency condition such as emergency repairs, corrective measures or emergency operations) are not included.
In addition, the list specifies the plant mode(s) during which entry would be required for each room or area (ref. 1 ). This IC addresses an event involving a release of a hazardous gas that precludes or impedes access to equipment necessary to maintain normal plant operation, or required for a normal plant cooldown and shutdown.
This condition represents an actual or potential substantial degradation of the level of safety of the plant. An Alert declaration is warranted if entry into the affected room/area is, or may be, procedurally required during the plant operating mode in effect at the time of the gaseous release. The emergency classification is not contingent upon whether entry is actually necessary at the time of the release. Evaluation of the IC and EAL do not require atmospheric sampling; it only requires the Emergency Director's judgment that the gas concentration in the affected room/area is sufficient to preclude or Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY -TECHNICAL BASES Page: 97 of 203 ATTACHMENT 7.1: EAL Technical Bases significantly impede procedurally required access. This judgment may be based on a variety of factors including an existing job hazard analysis, report of ill effects on personnel, advice from a subject matter expert or operating experience with the same or similar hazards. Access should be considered as impeded if extraordinary measures are necessary to facilitate entry of personnel into the affected room/area (e.g., requiring use of protective equipment, such as SCBAs, that is not routinely employed).
An emergency declaration is not warranted if any of the following conditions apply:
- The plant is in an operating mode different than the mode specified for the affected room/area (i.e., entry is not required during the operating mode in effect at the time of the gaseous release).
For example, the plant is in Mode 1 when the gaseous release occurs, and the procedures used for normal operation, cooldown and shutdown do not require entry into the affected room until Mode 4.
- The gas release is a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area (e.g., fire suppression system testing).
- The action for which room/area entry is required is of an administrative or record keeping nature (e.g., normal rounds or routine inspections).
- The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. An asphyxiant is a gas capable of reducing the level of oxygen in the body to dangerous levels. Most commonly, asphyxiants work by merely displacing air in an enclosed environment.
This reduces the concentration of oxygen below the normal level of around 19%, which can lead to breathing difficulties, unconsciousness or even death. This EAL does not apply to firefighting activities that automatically or manually activate a fire suppression system in an area, or to intentional inerting of containment.
Escalation of the emergency classification level would be via Recognition Category R, C or F ICs. CGS Basis Reference(s):
- 1. Attachment 7.4 Safe Operation
& Shutdown Areas Table 9 Bases 2. NEI 99-01 HAS Number: 13.1.1A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 6 -Control Room Evacuation Major Rev: Draft Minor Rev: N/A Page: 98 of 203 Initiating Condition:
Control Room evacuation resulting in transfer of plant control to alternate locations EAL: HA6.1 Alert An event has resulted in plant control being transferred from the Control Room to the Remote Shutdown Panel or Alternate Remote Shutdown Panel Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The Shift Manager (SM) determines if the Control Room is inoperable and requires evacuation.
This determination can depend on a number of factors, including Control Room habitability, loss of safe shutdown control circuity, or a Security event (ref. 1 ). For the purpose of this EAL the 15 minute classification clock starts when the last licensed operator leaves the Control Room. Inability to establish plant control from outside the Control Room escalates this event to a Site Area Emergency per EAL HS6.1. This IC addresses an evacuation of the Control Room that results in transfer of plant control to alternate locations outside the Control Room. The loss of the ability to control the plant from the Control Room is considered to be a potential substantial degradation in the level of plant safety. Following a Control Room evacuation, control of the plant will be transferred to alternate shutdown locations.
The necessity to control a plant shutdown from outside the Control Room, in addition to responding to the event that required the evacuation of the Control Room , will present challenges to plant operators and other on-shift personnel.
Activation of the ERO and emergency response facilities will assist in responding to these challenges.
Escalation of the emergency classification l evel would be via IC HS6. CGS Basis Reference(s):
- 1. ABN-CR-EVAC Control Room evacuation and Remote Cooldown 2. NEI 99-01 HA6 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 6 -Control Room Evacuation Major Rev: Draft Minor Rev: N/A Page: 99 of 203 Initiating Condition:
Inability to control a key safety function from outside the Control Room EAL: HS6.1 Site Area Emergency An event has resulted in plant control being transferred from the Control Room to the Remote Shutdown Panel or Alternate Remote Shutdown Panel AND Control of any of the following key safety functions is not reestablished within 15 min. (Note 1 ):
- Reactivity (Modes 1 and 2 only)
- RPV water level
- RCS heat removal Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
l1l213l4lsl Basis: The Shift Manager determines if the Control Room is inoperable and requires evacuation.
This determination can depend on a number of factors, including Control Room habitability, loss of safe shutdown control circuity, or a Security event (ref. 1 ). For the purpose of this EAL the 15 minute classification clock starts when the last licensed operator leaves the Control Room. This IC addresses an evacuation of the Control Room that results in transfer of plant control to alternate locations, and the control of a key safety function cannot be reestablished in a timely manner. The failure to gain control of a key safety function following a transfer of plant control to alternate locations is a precursor to a challenge to one or more fission product barriers within a relatively short period of time. The determination of whether or not "control" is established at the remote safe shutdown location(s) is based on Emergency Director judgment.
The Emergency Director is expected to make a reasonable, informed judgment within 15 minutes whether or not the operating staff has control of key safety functions from the remote safe shutdown location(s).
Escalation of the emergency classification level would be via IC FG1 or CG1. CGS Basis Reference(s):
- 1. ABN-CR-EVAC Control Room evacuation and Remote Cooldown 2. NEI 99-01 HS6 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 7 -Emergency Director Judgment Major Rev: Draft Minor Rev: N/A Page: 100 of 203 Initiating Condition:
Other conditions existing which in the judgment of the Emergency Director warrant declaration of a UE EAL: HU7.1 Unusual Event Other conditions exist which, in the judgment of the Emergency Director, indicate that events are in progress or have occurred which indicate a potential degradation of the level of safety of the plant or indicate a security threat to facility protection has been i nitiated. No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of SAFETY SYSTEMS occurs. Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The Emergency Director is the designated onsite individual having the responsibility and authority for implementing the Emergency Response Plan. The Shift Manager (SM) initially acts in the capacity of the Emergency Director and takes actions as outlined in the Emergency Plan implementing procedures.
If required by the emergency classification or if deemed appropriate by the Emergency Director, emergency response personnel are notified and instructed to report to the i r emergency response locations.
In this manner, the individual usually in charge of activities in the Control Room is responsible for initiating the necessary emergency response, but Plant Management i s expected to manage the emergency response as soon as available to do so in anticipation of the possible wide-ranging responsibilities associated with managing a major emergency.
This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the Emergency Director to fall under the emergency classification level description for an Unusual Event. CGS Basis Reference(s):
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 101 of 203 Category:
Subcategory:
Initiating Condition:
EAL: HA7.1 Alert ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 7 -Emergency Director Judgment Other conditions exist which in the judgment of the Emergency Director warrant declaration of an Alert Other conditions exist which, in the judgment of the Emergency Director, indicate that events are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant or a security event that involves probable life threatening risk to site personnel or damage to site equipment because of HOSTILE ACTION. Any releases are expected to be limited to small fractions of the EPA Protective Action Guideline exposure levels. Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The Emergency Director is the designated onsite individual having the responsibility and authority for implementing the Emergency Response Plan. The Shift Manager (SM) initially acts in the capacity of the Emergency Director and takes actions as outlined in the Emergency Plan implementing procedures.
If required by the emergency classification or if deemed appropriate by the Emergency Director, emergency response personnel are notified and instructed to report to their emergency response locations.
In this manner, the individual usually in charge of activities in the Control Room is responsible for initiating the necessary emergency response, but Plant Management is expected to manage the emergency response as soon as available to do so in anticipation of the possible wide-ranging responsibilities associated with managing a major emergency.
This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the Emergency Director to fall under the emergency classification level description for an Alert. CGS Basis Reference(s):
- 1. NEI 99-01 HA?
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 7 -Emergency Director Judgment Major Rev: Draft Minor Rev: N/A Page: 102 of 203 Initiating Condition:
Other conditions existing which in the judgment of the Emergency Director warrant declaration of a Site Area Emergency EAL: HS7.1 Site Area Emergency Other conditions exist which, in the judgment of the Emergency Director, indicate that events are in progress or have occurred which involve actual or likely major failures of plant functions needed for protection of the public or HOSTILE ACTION that results in intentional damage or malicious acts, (1) toward site personnel or equipment that could lead to the l i kely failure of or, (2) that prevent effective access to equipment needed for the protection of the public. Any releases are not expected to result in exposure levels which exceed EPA Protective Action Guideline exposure levels beyond the SITE BOUNDARY.
Mode Applicability:
I 1 I 2 I 3 I 4 I s I det I Basis: The Emergency Director is the designated onsite individual having the responsibility and authority for implementing the Emergency Response Plan. The Shift Manager (SM) initially acts in the capacity of the Emergency Director and takes actions as outlined in the Emergency Plan implementing procedures.
If required by the emergency classification or if deemed appropriate by the Emergency D i rector , emergency response personnel are notified and instructed to report to their emergency response locations.
In this manner, the individual usually in charge of activities in the Control Room is responsible for initiating the necessary emergency response, but Plant Management is expected to manage the emergency response as soon as available to do so in anticipation of the possible wide-ranging responsibilities associated with managing a major emergency.
This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the Emergency Director to fall under the emergency classification level description for a Site Area Emergency.
CGS Basis Reference(s):
- 1. NEI 99-01 HS?
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases H -Hazards and Other Conditions Affecting Plant Safety 7 -Emergency Director Judgment Major Rev: Draft Minor Rev: N/A Page: 103 of 203 Initiating Condition:
Other conditions exist which in the judgment of the Emergency Director warrant declaration of a General Emergency EAL: HG7.1 General Emergency Other conditions exist which, in the judgment of the Emergency Director, indicate that events are in progress or have occurred which involve actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity or HOSTILE ACTION that results in an actual loss of physical control of the facility.
Releases can be reasonably expected to exceed EPA Protective Action Guideline exposure levels offsite for more than the immediate site area. Mode Applicability:
I 1 I 2 3 4 s I det I Basis: The Emergency Director is the designated onsite individual having the responsibility and authority for implementing the Emergency Response Plan. The Shift Manager(SM) initially acts in the capacity of the Emergency Director and takes actions as outlined in the Emergency Plan implementing procedures.
If required by the emergency classification or if deemed appropriate by the Emergency Director, emergency response personnel are notified and instructed to report to their emergency response locations.
In this manner, the individual usually in charge of activities in the Control Room is responsible for initiating the necessary emergency response, but Plant Management is expected to manage the emergency response as soon as available to do so in anticipation of the possible wide-ranging responsibilities associated with managing a major emergency.
This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the Emergency Director to fall under the emergency classification level description for a General Emergency.
CGS Basis Reference(s):
- 1. NEI 99-01 HG?
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Category M -System Malfunction EAL Group: Hot Conditions (RCS temperature GT 200°F); EALs in this category are applicable only in one or more hot operating modes. Major Rev: Draft Minor Rev: N/A Page: 104 of 203 Numerous system-related equipment failure events that warrant emergency classification have been identified in this category.
They may pose actual or potential threats to plant safety. The events of this category pertain to the following subcategories:
- 1. Loss of Emergency AC Power Loss of emergency electrical power can compromise plant safety system operability including decay heat removal and emergency core cooling systems which may be necessary to ensure fission product barrier integrity.
This category includes loss of onsite and offsite sources for emergency AC buses. 2. Loss of vital DC Power Loss of vital electrical power can compromise plant safety system operability including decay heat removal and emergency core cooling systems which may be necessary to ensure fission product barrier integrity.
This category includes loss of power to or degraded voltage on the vital 125 VDC buses. 3. Loss of Control Room Indications Certain events that degrade plant operator ability to effectively assess plant conditions within the plant warrant emergency classification.
Losses of indicators are in this subcategory.
- 4. RCS Activity During normal operation, reactor coolant fission product activity is very low. Small concentrations of fission products in the coolant are primarily from the fission of tramp uranium in the fuel clad or minor perforations in the clad itself. Any significant increase from these base-line levels (2% -5% clad failures) is indicative of fuel failures and is covered under the Fission Product Barrier Degradation category.
However, lesser amounts of clad damage may result in coolant activity exceeding Technical Specification limits. These fission products will be circulated with the reactor coolant and can be detected by coolant sampling.
- 5. RCS Leakage The reactor pressure vessel provides a volume for the coolant that covers the reactor core. The reactor pressure vessel and associated pressure piping (reactor coolant system) together provide a barrier to limit the release of radioactive material should the reactor fuel clad integrity fail. Excessive RCS leakage greater than Technical Specification limits indicates potential pipe cracks that may propagate to an extent threatening fuel clad, RCS and Containment integrity.
- 6. RPS Failure This subcategory includes events related to failure of the Reactor Protection System (RPS) to initiate and complete reactor scrams. In the plant licensing basis, postulated failures of the RPS to complete a reactor scram comprise a specific set of analyzed events referred to as Anticipated Transient Without Scram (ATWS) events. For EAL classification, however, ATWS is intended to mean any trip failure event that does not achieve reactor shutdown.
If RPS actuation fails to assure reactor shutdown, positive control of reactivity is at risk and could cause a threat to fuel clad, RCS and Containment integrity.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 105 of 203 ATTACHMENT 7.1: EAL Technical Bases 7. Loss of Communications Certain events that degrade plant operator ability to effectively communicate with essential personnel within or external to the plant warrant emergency classification. 8. Hazardous Event Affecting Safety Systems Certain hazardous natural and technological events may result in visible damage to or degraded performance of safety systems warranting classification.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 106 of 203 Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 1 -Loss of Emergency AC Power Loss of all offsite AC power capability to emergency buses for 15 minutes or longer MU1.1 Unusual Event Loss of ill! offsite AC power capability, Table 2, to emergency buses SM-7 and SM-8 for GE 15 min. (Note 1) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Table 2 AC Power Sources Off site
- Startup Transformer TR-S
- Backup Transformer TR-B
- Backfeed 500 KV power through Main Transformers (if already aligned in modes 4, 5, def only) On site
- DG1
- DG2
- Main Generator via TR-N1/N2 Mode Applicability:
Basis: Table 2 provides the list of AC power sources available to power emergency buses (ref. 1, 2). Station Startup 230KV power comes from the Ashe substation through Startup transformer TR-S. The startup transformer usually supplies station auxiliary loads when the main generator is not available.
Station Backup 115KV power from the Benton Substation feeder can be supplied to emergency buses SM-7 and SM-8. (ref. 3, 4) Credit is not taken in this EAL for SM-4/DG3 crosstie capability because establishing the crosstie to SM-7 or SM-8 is assumed to require more than 15 minutes (5). SM-4 is not a site specific emergency AC buss source since SM-4 does not provide core cooling or containment cooling. This IC addresses a prolonged loss of offsite power. The loss of offsite power sources renders the plant more vulnerable to a complete loss of power to AC emergency buses. This condition represents a potential reduction in the level of safety of the plant.
Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 107 of 203 ATTACHMENT 7.1: EAL Technical Bases For emergency classification purposes, "capability" means that an offsite AC power source(s) is available to the emergency buses, whether or not the buses are powered from it. Fifteen minutes was selected as a threshold to exclude transient or losses of offsite power. Escalation of the emergency classification level would be via IC MA 1. CGS Basis Reference(s):
- 1. FSAR Figure 8.1-2.1 Main One-Line Diagram -Main Buses 2. FSAR Figure 8.1-2.2 Main One-Line Diagram -Emergency Buses 3. FSAR Section 8.2 4. 01-53 Offsite Power 5. FSAR Section 8.3 6. NEI 99-01 SU1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 108 of 203 Category:
Subcategory:
Initiating Condition:
EAL: MA1.1 Alert ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 1 -Loss of Emergency AC Power Loss of all but one AC power source to emergency buses for 15 minutes or longer AC power capability, Table 2, to emergency buses SM-7 and SM-8 reduced to a single power source for GE 15 min. (Note 1) AND Any additional single power source failure will result in a loss of ill! AC power to SAFETY SYSTEMS Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Table 2 AC Power Sources Off site
- Startup Transformer TR-S
- Backup Transformer TR-B
- Backfeed 500 KV power through Main Transformers (if already aligned in modes 4, 5, def only) On site
- DG1
- DG2
- Main Generator via TR-N 1 /N2 Mode Applicability:
Basis: Table 2 provides the list of AC power sources available to power emergency buses (ref. 1, 2). Station Startup 230KV power comes from the Ashe substation through Startup transformer TR-S. The startup transformer usually supplies station auxiliary loads when the main generator is not available.
Station Backup 115KV power from the Benton Substation feeder can be supplied to emergency buses SM-7 and SM-8 (ref. 3, 4). Credit is not taken in this EAL for SM-4/DG3 crosstie capability because establishing the crosstie to SM-7 or SM-8 is assumed to require more than 15 minutes (5). SM-4 is not a site specific emergency AC buss source since SM-4 does not provide core cooling or containment cooling.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 109 of 203 ATTACHMENT 7.1: EAL Technical Bases The second threshold statement in this EAL does not describe a separate condition, it is clarifying the first threshold statement.
This hot condition EAL is equivalent to the cold condition EAL CU2.1. This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS. In this condition, the sole AC power source may be powering one, or more than one, train of safety-related equipment.
This IC provides an escalation path from IC MU1. An "AC power source" is a source recognized in AOPs, and capable of supplying required power to an emergency bus. Some examples of this condition are presented below.
- A loss of all offsite power with a concurrent failure of all but one emergency power source (e.g., an onsite diesel generator).
- A loss of all offsite power and loss of all emergency power sources (e.g., onsite diesel generators) with a single train of emergency buses being back-fed from the unit main generator.
- A loss of emergency power sources (e.g., onsite diesel generators) with a single train of emergency buses being back-fed from an offsite power source. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. Escalation of the emergency classification level would be via IC MS1. CGS Basis Reference(s):
- 1. FSAR Figure 8.1-2.1 Main One-Line Diagram -Main Buses 2. FSAR Figure 8.1-2.2 Main One-Line Diagram -Emergency Buses 3. FSAR Section 8.2 4. 01-53 Offsite Power 5. FSAR Section 8.3 6. ABN-ELEC-LOOP
- 7. NEI 99-01 SA1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 11 O of 203 ATTACHMENT 7.1: EAL Technical Bases Category: M -System Malfunction Subcategory: 1 -Loss of Emergency AC Power Initiating Condition:
Loss of all offsite power and .sill onsite AC power to emergency buses for 15 minutes or longer EAL: MS1.1 Site Area Emergency Loss of all offsite and all onsite AC power capability to emergency buses SM-7 and SM-8 for GE 15 min. (Note 1) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I 1 I 2 3 Basis: This hot condition EAL is equivalent to the cold condition EAL CA2.1. This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. In addition, fission product barrier monitoring capabilities may be degraded under these conditions.
This IC represents a condition that involves actual or likely major failures of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via I Cs RG1, FG1 or MG1. CGS Basis Reference(s):
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 111 of 203 ATTACHMENT 7.1: EAL Technical Bases Category:
M -System Malfunction Subcategory: 1 -Loss of Emergency AC Power Initiating Condition:
Prolonged loss of gJJ. offsite and all onsite AC power to emergency buses EAL: MG1 .1 General Emergency Loss of gJJ. offsite AND gJJ. onsite AC power capability to emergency buses SM-7 and SM-8 AND EITHER: Restoration of emergency bus SM-7 or SM-8 in LT 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> is not likely (Note 1) OR RPV level cannot be restored and maintained GT-186 in. Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Basis: Credit may be taken in this EAL for DG 3 crosstie capability provided a reasonable expectation exists that AC power can be restored to either SM-7 or SM-8 from DG3 and SM-4 within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. (ref. 1 ). Four hours is the station blackout coping time (ref. 2). Indication of continuing core cooling degradation is manifested by the inability to restore and maintain RPV water level above the Minimum Steam Cooling Reactor Water Level (-186 in.) (ref. 3). Core submergence is the most desirable means of core cooling, however when RPV level is below TAF, the uncovered portion of the core can be cooled by less reliable means (i.e., steam cooling or spray cooling).
This IC addresses a prolonged loss of all power sources to AC emergency buses. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. A prolonged loss of these buses will lead to a loss of one or more fission product barriers.
In addition, fission product barrier monitoring capabilities may be degraded under these conditions.
The EAL should require declaration of a General Emergency prior to meeting the thresholds for IC FG1. This will allow additional time for implementation of offsite protective actions. Escalation of the emergency classification from Site Area Emergency will occur if it is projected that power cannot be restored to at least one AC emergency bus by the end of the analyzed station blackout coping period. Beyond this time, plant responses and event trajectory are subject to greater uncertainty, and there is an increased likelihood of challenges to multiple fission product barriers.
The estimate for restoring at least one essential bus should be based on a realistic appraisal of the situation.
Mitigation actions with a low probability of success should not be used as a basis for delaying a classification upgrade. The goal is to maximize the time available to prepare for, and implement, protective actions for the public.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 112 of 203 ATTACHMENT 7.1: EAL Technical Bases The EAL will also require a General Emergency declaration if the loss of AC power results in parameters that indicate an inability to adequately remove decay heat from the core. CGS Basis Reference(s):
- 1. FSAR Section 8.2 2. PPM 5.6.1 Station Blackout (SBO} 3. PPM 5.1.1 RPV Control 4. NEI 99-01 SG1 Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 113 of 203 Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT7.1:
EAL Technical Bases M-System Malfunction 1 -Loss of Essential AC Power Loss of all emergency AC and vital DC power sources for 15 minutes or longer MG1 .2 General Emergency Loss of all offsite AND all onsite AC power capability to emergency buses SM-7 and SM-8 for GE 15 min. (Note 1) AND Indicated voltage is LT 108 VDC on both 125 VDC buses DP-S1-1 and DP-S1-2 for GE 15 min. (Note 1) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Basis: This EAL addresses operating experience from the March 2011 accident at Fukushima Daiichi. The 125 VDC Class 1 E DC power system consists of three electrically independent and separate distribution systems (S1-1, S1-2, and S1-HPCS) (ref. 2). S1-HPCS is not included in this EAL. Each DC distribution system has a battery and a battery charger that are normally connected to the bus such that these two sources of power are operating in parallel.
The charger is normally supplying system electrical loads with the battery on a float charge. Each battery has the necessary amp-hour discharge capacity to sustain system loads for a minimum of two hours. This capacity is specifically for a loss of power to the charger coincident w i th a design basis accident.
The batteries have capacity to carry design load at 60°F without decreasing battery voltage below 1.81 volts/cell (or 108 VDC, ref. 3) with loss of output from the battery chargers during the specified period. Battery capacity is sufficient to provide starting currents while operating at full load. (ref. 1, 3). This IC addresses a concurrent and prolonged loss of both emergency AC and Vital DC power. A loss of all emergency AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. A loss of vital DC power compromises the ability to monitor and control SAFETY SYSTEMS. A sustained loss of both emergency AC and vital DC power will lead to multiple challenges to fission product barriers.
Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. The 15-minute emergency declaration clock begins at the point when both EAL thresholds are met. CGS Basis Reference(s):
- 1. FSAR Section 8 2. E505 DC One Line Diagram 3. Calculation No. 2.05.01 Battery Sizing, Voltage Drop, and Charger Studies for Div. 1 & 2 Systems 4. PPM 5.6.1 Station Blackout (SBO) 5. NEI 99-01 SGS Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 114 of 203 ATTACHMENT 7.1: EAL Technical Bases Category: M -System Malfunction Subcategory: 2 -Loss of Vital DC Power Initiating Condition:
Loss of all vital DC power for 15 minutes or longer EAL: MS2.1 Site Area Emergency Indicated voltage is LT 108 VDC on both 125 VDC buses DP-S1-1 and DP-S1-2 for GE 15 min. (Note 1) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
I 1 I 2 3 Basis: The 125 VDC Class 1 E DC power system (ref. 1) consists of three electrically independent and separate distribution systems (S1-1, S1-2, and S1-HPCS) (ref. 2). S1-HPCS is not included in this EAL. Each DC distribution system has a and a charger that are normally connected to the bus such that these two sources of power are operating in parallel.
The charger is normally supplying system electrical loads with the on a float charge. Each has the amp-hour discharge capacity to sustain system loads for a minimum of two hours. This capacity is specifically for a loss of power to the charger coincident with a design basis accident.
The batteries have capacity to design load at 60°F without decreasing voltage below 1.81 volts/cell (or 108 VDC, ref. 2) with loss of output from the chargers during the specified period.
capacity is sufficient to provide starting currents while operating at full load. (ref. 3). This EAL is the hot condition equivalent of the cold condition loss of DC power EAL CU4.1. This IC addresses a loss of vital DC power which compromises the ability to monitor and control SAFETY SYSTEMS. In modes above Cold Shutdown, this condition involves a major failure of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or power losses. Escalation of the emergency classification level would be via I Cs RG1, FG1 or MG1. CGS Basis Reference(s):
- 1. E505 DC One Line Diagram 2. Calculation No. 2.05.01 Sizing , Voltage Drop, and Charger Studies for Div. 1 & 2 Systems 3. FSAR Section 8.3.2 4. NEI 99-01 SS8 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 115 of 203 ATTACHMENT 7.1: EAL Technical Bases Category: M -System Malfunction Subcategory: 3 -Loss of Control Room Indications Initiating Condition:
UNPLANNED loss of Control Room indications for 15 minutes or longer EAL: MU3.1 Unusual Event An UNPLANNED event results in the inability to monitor one or more Table 10 parameters from within the Control Room for GE 15 min. (Note 1) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Table 10 Safety System Parameters
- Reactor power
- RPV level
- RPV pressure
- Primary containment pressure
- Wetwell level
- Wetwell temperature Mode Applicability:
Basis: SAFETY SYSTEM parameters listed in Table 10 are monitored in the Control Room through a combination of hard control panel indicators as well as computer based information systems. The Plant Computers and Graphic Display System provide redundant parameter indications (ref. 1-4). This IC addresses the difficulty associated with monitoring normal plant conditions without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. This condition is a precursor to a more significant event and represents a potential degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s).
For example, the reactor power level cannot be determined from any analog , digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required.
The event would be reported if it significantly impaired the capability to perform emergency assessments.
In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making.
This EAL is focused on a selected subset of plant parameters associated with the key safety functions of reactivity control, RPV level and RCS heat removal. The loss of the ability to determine one or more Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 116 of 203 ATTACHMENT 7.1: EAL Technical Bases of these parameters from within the Control Room is considered to be more significant than simply a reportable condition.
In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other SAFETY SYSTEM parameters may be impacted as well. For example, if the value for RPV water level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter values may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation of the emergency classification level would be via IC MA3. CGS Basis Reference(s):
- 1. FSAR Section 7.7.1 2. ABN-COMPUTER
- 3. SOP-COMPUTER-OPS Plant Process Computer (PPC) 4. SOP-GDS-OPS Graphics Display System 5. NEI 99-01 SU2 Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 117 of 203 Category:
Subcategory:
Initiating Condition:
EAL: MA3.1 Alert ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 3 -Loss of Control Room Indications UNPLANNED loss of Control Room indications for 15 minutes or longer with a significant transient in progress An UNPLANNED event results in the inability to monitor one or more Table 10 parameters from within the Control Room for GE 15 min. (Note 1) AND Any Table 11 transient event in progress Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Basis: Table 10 Safety System Parameters
- Reactor power
- RPV level
- RPV pressure
- Primary containment pressure
- Wetwell level
- Wetwell temperature Table 11 Significant Transients
- Reactor scram
- Runback GT 25% thermal reactor power
- Electrical load rejection GT 25% full electrical load
- ECCS injection
- Thermal power oscillations GT 10% SAFETY SYSTEM parameters listed in Table 10 are monitored in the Control Room through a combination of hard control panel indicators as well as computer based information systems. The Plant Computers and Graphic Display System provide redundant parameter indications (ref. 1-4).
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 118 of 203 ATTACHMENT 7.1: EAL Technical Bases Significant transients are listed in Table 11 and include response to automatic or manually initiated functions such as scrams, run backs involving greater than 25% thermal power change, electrical load rejections of greater than 25% full electrical load, ECCS injections, or thermal power oscillations of 10% or greater. This IC addresses the difficulty associated with monitoring rapidly changing plant condit i ons during a transient without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. During this condition, the margin to a potential fission product barrier challenge is reduced. It thus represents a potential substantial degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s).
For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required. The event would be reported if it significantly impaired the capability to perform emergency assessments.
In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making.
This EAL is focused on a selected subset of plant parameters associated with the key safety functions of reactivity control, RPV level and RCS heat removal. The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition.
In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other SAFETY SYSTEM parameters may be impacted as well. For example, if the value for RPV water level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter values may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation of the emergency classification level would be via ICs FS1 or IC RS1 CGS Basis Reference(s):
- 1. FSAR Section 7.7.1 2. ABN-COMPUTER
- 3. SOP-COMPUTER-OPS Plant Process Computer (PPC) 4. SOP-GOS-OPS Graphics Display System 5. NEI 99-01 SA2 Number: 13.1.1A J Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 4 -RCS Activity Major Rev: Draft Minor Rev: N/A Page: 119 of 203 Initiating Condition:
Reactor coolant activity greater than Technical Specification allowable limits EAL: MU4.1 Unusual Event SJAE CONDSR OUTLET RAD HI-HI alarm (P602) Mode Applicability:
Basis: The main condenser offgas gross gamma activity rate is an initial condition of the Main Condenser Offgas System failure event. The gross gamma activity rate is controlled to ensure that during the event, the calculated offsite doses will be well within the limits of 10 CFR 50.67 (ref. 1 ). SJAE CONDSR OUTLET RAD HI HI monitor and alarm, OG-RIS-612 (GE 2300 mR/hr), senses the offgas effluent and, therefore, may be one of the first indicators of degrading fuel conditions.
The alarm is confirmed by verification of greater than the current alarm setpoint on Recorder OG-RIS-612 on Panel P604 or high offgas pre-treatment air activity (determined by sample results) greater than limits specified in Technical Specification.
If OG-RIS-612 and OG-RR-604 are reading off-scale high, the alarm may be confirmed by a significant increase in the Main Steam line radiation monitors (MS-RIS-610A-D) on H13-P606 and H13-P633 (ref. 2). This IC addresses a reactor coolant activity value that exceeds an allowable limit specified in Technical Specifications.
This condition is a precursor to a more significant event and represents a potential degradation of the level of safety of the plant. Escalation of the emergency classification level would be via ICs FA1 or the Recognition Category R I Cs. CGS Basis Reference(s):
- 1. Technical Specifications 3.7.5 2. PPM 4.602.A5 ANNUNCIATOR RESPONSE, P602 ANNUNCIATOR A5 3-3 3. NEI 99-01 SU3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 4 -RCS Activity Major Rev: Draft Minor Rev: N/A Page: 120 of 203 Initiating Condition:
Reactor coolant activity greater than Technical Specification allowable limits EAL: MU4.2 Unusual Event Coolant activity GT 0.2 µCi/gm dose equivalent 1-131 Mode Applicability:
Basis: The limits on the specific activity of the primary coolant ensure that the 2-hour thyroid and whole body doses at the SITE BOUNDARY, resulting from an Main Steam Line Break (MSLB) outside containment during steady state operation, will not exceed the dose guidelines of 10 CFR 50.67. This IC addresses a reactor coolant activity value that exceeds an allowable limit specified in Technical Specifications.
This condition is a precursor to a more significant event and represents a potential degradation of the level of safety of the plant. Escalation of the emergency classification level would be via I Cs FA 1 or the Recognition Category R I Cs. CGS Basis Reference(s):
- 1. Technical Specifications 3.4.8 2. NEI 99-01 SU3 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
Initiating Condition:
EAL: ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 5 -RCS Leakage RCS leakage for 15 minutes or longer MUS.1 Unusual Event (1) RCS unidentified or pressure boundary leakage GE 10 gpm for GE 15 min. OR (2) RCS identified leakage GT 25 gpm for GE 15 min. OR Major Rev: Draft Minor Rev: N/A Page: 121 of 203 (3) Leakage from the RCS to a location outside containment GT 25 gpm for GE 15 min. (Note 1) Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Mode Applicability:
Basis: Pressure boundary leakage is defined to be leakage through a non-isolable fault in a RCS component body, pipe wall, or vessel wall. This EAL does not apply to relief valves performing their normal design function.
Unidentified leakage is defined to be all leakage into the drywell that is not identified leakage. Identified leakage is defined to be leakage into the drywell such as that from pump seals or valve packing, that is captured and conducted to a sump; or leakage into the drywell atmosphere from sources that are both specifically located and known either not to interfere with the operation of leakage detection systems or not to be pressure boundary leakage. (ref. 1) The Leak Detection (LO) system is designed to monitor leakage from the reactor coolant pressure boundary and to isolate this leakage when limits are exceeded.
Systems, or parts of systems, that are in direct communication with the reactor vessel (form part of the primary coolant pressure boundary) are provided with leakage detection systems. (ref. 2-8) Drain flow from the drywell equipment and floor drain sumps is monitored and recorded (EDR-FRS-623) on P632. The flow rate for unidentified leakage in the EAL is equal to the full scale reading on EDR-FRS-623 Pen 1. Leakage not explicitly identified by installed instrumentation requires analysis and declaration clock starts at completion of analysis.
This includes use of alternate means. As an alternate means, leaks within the drywell are detected by monitoring for abnormally high: Pressure or temperature inside the drywell
- Fill up rates of equipment and floor drain sumps
- Containment leak detection rad monitors (CMS-SR-20/21)
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 122 of 203 ATTACHMENT 7.1: EAL Technical Bases Outside Containment leakage may require analysis to quantify leak rate GT 25 gpm and declaration clock starts at completion of analysis.
Examples of outside Containment leakage include:
- GT 25 gpm RWCU differential flow (RWCU-Fl-620) due to RCS leakage
- Instrument line break in the RX building with failure to isolate
- Rx Building sump fill timers due to RCS leakage RFW and RCC are not considered part of RCS leakage for this EAL. For classification under this EAL, RCS leakage includes a broken SRV tailpipe that is discharging into the drywall or wetwell airspace.
Once the SRV is closed , however, this RCS leakage path is considered isolated.
This IC addresses RCS leakage which may be a precursor to a more significant event. In this case, RCS leakage has been detected and operators, following applicable procedures, have been unable to promptly isolate the leak. This condition is considered to be a potential degradation of the level of safety of the plant. Threshold
- 1 and threshold
- 2 are focused on a loss of mass from the RCS due to "unidentified leakage", "pressure boundary leakage" or "identified leakage" (as these leakage types are defined in the plant Technical Specifications).
Threshold
- 3 addresses an RCS mass loss caused by an UNISOLABLE leak through an interfacing system. These conditions thus apply to leakage into the containment, or a location outside of containment.
The leak rate values for each threshold were selected because they are usually observable with normal Control Room indications.
Lesser values typically require time-consuming calculations to determine (e.g., a mass balance calculation).
Threshold
- 1 uses a lower value that reflects the greater significance of unidentified or pressure boundary leakage. A stuck-open Safety Relief Valve (SRV) or SRV leakage is not considered either identified or unidentified leakage by Technical Specifications and, therefore, is not applicable to this EAL. The 15-minute threshold duration allows sufficient time for prompt operator actions to isolate the leakage, if possible.
Escalation of the emergency classification level would be via ICs of Recognition Category R or F. CGS Basis Reference(s):
- 1. Technical Specification 1.1 2. Technical Specifications 3.4.7 3. FSAR Section 5.2.5 4. FSAR Section 7 .6.1 5. ABN-LEAKAGE Reactor Coolant Leakage 6. SOP-EDR-OPS Equipment Drain System Ope r ation 7. SOP-FDR-OPS Floor Drain System Operation
- 8. PPM 10.27.35 Leakage Surveillance And Prevention Program 9. NEI 99-01 SU4 Number: 13.1.1A j Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 6 -RPS Failure Initiating Condition:
Automatic or manual scram fails to shut down the reactor EAL: MU6.1 Unusual Event An automatic OR manual scram did not shut down the reactor AND Major Rev: Draft Minor Rev: N/A Page: 123 of 203 A subsequent automatic scram OR manual scram action taken at the reactor control console (mode switch in shutdown, manual push buttons or ARI) is successful in shutting down the reactor as indicated by reactor power LE 5% (APRM downscale) (Note 8) Note 8: A manual scram action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies Mode Applicability:
I 1 I 2 Basis: This EAL addresses a failure of an automatic or manually initiated scram and a subsequent automatic or manual scram is successful in shutting down the reactor (reactor power LE 5%) (ref.1 ). A successful scram has occurred when there is sufficient rod insertion from the trip of RPS to bring the reactor power to or below the APRM downscale trip setpoint of 5%. For the purposes of this EAL, a successful automatic initiation of ARI that reduces reactor power to or below 5% is a not a successful automatic scram. (ref. 2, 3, 4, 5) For the purposes of emergency classification at the Unusual Event level, successful manual scram actions are those which can be quickly performed from the reactor control console (i.e., mode switch, manual scram pushbuttons, and manual ARI actuation).
Reactor shutdown achieved by use of the alternate control rod insertion methods of PPM 5.5.11 does not constitute a successful manual scram (ref. 6). Following any automatic RPS scram signal plant procedures prescribe insertion of redundant manual scram signals to back up the automatic RPS scram function and ensure reactor shutdown is achieved.
Even if the first subsequent manual scram signal inserts all control rods to the full-in position immediately after the initial failure of the automatic scram, the lowest level of classification that must be declared is an Unusual Event. The operating mode change associated with movement of the Mode Switch, by itself, does not justify failure to declare an emergency for ATWS events. If both subsequent automatic and subsequent manual reactor scram actions in the Control Room fail, the event escalates to an Alert under EAL MA6.1. This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor scram that results in a reactor shutdown, and either a subsequent operator manual action taken at the reactor control consoles or an automatic scram is successful in shutting down the reactor. This event is a precursor to a more significant condition and thus represents a potential degradation of the level of safety of the plant.
Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 124 of 203 ATTACHMENT 7.1: EAL Technical Bases Following the failure on an automatic reactor scram, operators will promptly initiate manual actions at the reactor control consoles to shutdown the reactor (e.g., initiate a manual reactor scram). If these manual actions are successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems. If an initial manual reactor scram is unsuccessful, operators will promptly take manual action at another location(s) on the reactor control consoles to shutdown the reactor (e.g., i nitiate a manual reactor scram) using a different switch). Depending upon several factors, the initial or subsequent effort to manually scram the reactor, or a concurrent plant condition, may lead to the generation of an automatic reactor scram signal. If a subsequent manual or automatic scram is successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems. A manual action at the reactor control consoles is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core (e.g., initiating a manual reactor scram). This action does not include manually driving in control rods or implementation of boron injection strategies.
Actions taken at back-panels or other locations within the control room, or any location outside the control room , are not considered to be "at the reactor control consoles".
Taking the reactor mode switch to shutdown is considered to be a manual scram action. The plant response to the failure of an automatic or manual reactor scram will based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If subsequent operator manual actions taken at the reactor control consoles are also unsuccessful in shutting down the reactor, then the emergency classification level will escalate to an alert v i a IC SA6. Depending upon the plant response, escalation is also possible via IC FA1. Absent the plant conditions needed to meet either IC MA6 or FA 1, an unusual event declaration is appropriate for this event. A reactor shutdown is determined in accordance with applicable emergency operating procedure criteria.
Should a reactor scram signal be generated as a result of plant work (e.g., RPS setpoint testing), the following classification guidance should be appl i ed.
- If the signal causes a plant transient that should have included an automatic reactor scram and the RPS fails to automatically shutdown the reactor, then this IC and the EALs are applicable , and should be evaluated.
- If the signal does not cause a plant transient and the scram failure i s determined through other means (e.g., assessment of test results), then this IC and the EALs are not applicable and no classification is warranted.
Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 125 of 203 ATTACHMENT 7.1: EAL Technical Bases CGS Basis Reference(s):
- 1. Technical Specifications Table 3.3.1.1-1
- 5. PPM 5.1.2 RPV Control-A TWS 6. PPM 5.5.11 Alternate Control Rod Insertions
- 7. NEI 99-01 SUS Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 126 of 203 Category:
Subcategory:
Initiating Condition:
EAL: MA6.1 Alert ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 2 -RPS Failure Automatic or manual scram fails to shut down the reactor and subsequent manual actions taken at the reactor control consoles are not successful in shutting down the reactor An automatic OR manual scram fails to shut down the reactor AND Manual scram actions taken at the reactor control console (mode switch in shutdown, manual push buttons or ARI) are not successful in shutting down the reactor as indicated by reactor power GT 5% (Note 8) Note 8: A manual scram action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies Mode Applicability:
I 1 I 2 Basis: This EAL addresses any automatic or manual reactor scram signal that fails to shut down the reactor followed by a subsequent manual scram that fails to shut down the reactor to an extent the reactor is producing energy in excess of the heat load for which the safety systems were designed.
For the purposes of emergency classification, successful manual scram actions are those which can be quickly performed from the reactor control console (i.e., mode switch in shutdown, manual push buttons or ARI). Reactor shutdown achieved by use of the alternate control rod insertion methods of PPM 5.5.11 does not constitute a successful manual scram (ref. 1 ). The APRM downscale trip setpoint (5%) is a minimum reading on the power range scale that indicates power production.
It also approximates the decay heat which the shutdown systems were designed to remove and is indicative of a condition requiring immediate response to prevent subsequent core damage. Below the APRM downscale trip setpoint, plant response will be similar to that observed during a normal shutdown.
Nuclear instrumentation (APRM) indications or other reactor parameters (steam flow, BPV position or continuous SRV operation) can be used to determine if reactor power is greater than 5% power (ref. 2). Escalation of this event is via EAL MS6.1. This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor scram that results in a reactor shutdown, and subsequent operator manual actions taken at the reactor control consoles to shutdown the reactor are also unsuccessful.
This condition represents an actual or potential substantial degradation of the level of safety of the plant. An emergency declaration is required even if the reactor is subsequently shutdown by an action taken away from the reactor control consoles since this event entails a significant failure of the RPS. A manual action at the reactor control console is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core (e.g., initiating a manual reactor scram). This action does not include manually driving in control rods or implementation of boron injection strategies.
If this Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 127 of 203 ATTACHMENT 7.1: EAL Technical Bases action(s) is unsuccessful, operators would immediately pursue additional manual actions at locations away from the reactor control console (e.g., locally opening breakers).
Actions taken at backpanels or other locations within the control room, or any location outside the control room, are not considered to be "at the reactor control console".
Taking the reactor mode switch to shutdown is considered to be a manual scram action. The plant response to the failure of an automatic or manual reactor scram will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If the failure to shut down the reactor is prolonged enough to cause a challenge to RPV water level or RCS heat removal safety functions, the emergency classification level will escalate to a Site Area Emergency via IC MS6. Depending upon plant responses and symptoms, escalation is also possible via IC FS1. Absent the plant conditions needed to meet either IC SS6 or FS1, an Alert declaration is appropriate for this event. It is recogn i zed that plant responses or symptoms may also require an Alert declaration in accordance with the Recognition Category F ICs; however, this IC and EAL are included to ensure a timely emergency declaration.
A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria.
CGS Basis Reference(s):
- 1. PPM 5.5.11 Alternate Control Rod Insertions
- 2. Technical Specifications Table 3.3.1.1-1
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases M -System Malfunction 2 -RPS Failure Major Rev: Draft Minor Rev: N/A Page: 128 of 203 Initiating Condition:
Inability to shut down the reactor causing a challenge to RPV water level or RCS heat removal EAL: MS6.1 Site Area Emergency An automatic OR manual scram fails to shut down the reactor AND All actions to shut down the reactor are not successful as indicated by reactor power GT 5% AND EITHER: RPV level cannot be restored and maintained above -186 in. or cannot be determined OR WW temperature and RPV pressure cannot be maintained below the HCTL Mode Applicability:
I 1 I 2 Basis: This EAL addresses the following:
- Any automatic reactor scram signal followed by a manual scram that fails to shut down the reactor to an extent the reactor is producing energy in excess of the heat load for which the safety systems were designed (EAL MA6.1 ), and
- Indications that either core cooling is extremely challenged or heat removal is extremely challenged.
Reactor shutdown achieved by use of control rod insertion methods in PPM 5.5.11 is also credited as a successful manual scram provided reactor power can be reduced below the APRM downscale trip setpoint before indications of an extreme challenge to either core cooling or heat removal exist. (ref. 1) The APRM downscale trip setpoint (5%) is a minimum reading on the power range scale that indicates power production.
It also approximates the decay heat which the shutdown systems were designed to remove and is indicative of a condition requiring immediate response to prevent subsequent core damage. Below the APRM downscale trip setpoint, plant response will be similar to that observed during a normal shutdown.
Nuclear instrumentation (APRM) indications or other reactor parameters (steam flow, RPV pressure, wetwell temperature trend) can be used to determine if reactor power is greater than 5% power (ref. 2). The combination of failure of both front line and backup protection systems to function in response to a plant transient, along with the continued production of heat, poses a direct threat to the Fuel Clad and RCS barriers.
Indication that core cooling is extremely challenged is manifested by inability to restore and maintain RPV water level above the Minimum Steam Cooling RPV Water Level (MSCRWL) (ref. 3). The MSCRWL is the lowest RPV level at which the covered portion of the reactor core will generate sufficient steam to prevent any clad temperature in the uncovered part of the core from exceeding Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 129 of 203 ATTACHMENT 7.1: EAL Technical Bases 1500°F. This water level is utilized in the EOPs to preclude fuel damage when RPV level is below the top of active fuel. RPV level below the MSCRWL for an extended period of time without satisfactory core spray cooling could be a precursor of a core melt sequence.
The Heat Capacity Temperature Limit (HCTL) is the highest suppression pool water temperature from which Emergency RPV Depressurization will not raise suppression pool temperature above the maximum design suppression pool temperature.
The HCTL is a function of RPV pressure and wetwell level. It is utilized to preclude failure of the containment and equipment in the containment necessary for the safe shutdown of the plant (ref. 4 ). This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor scram that results in a reactor shutdown, all subsequent operator actions to manually shutdown the reactor are unsuccessful, and continued power generation is challenging the capability to adequately remove heat from the core and/or the RCS. This condition will lead to fuel damage if additional mitigation actions are unsuccessful and thus warrants the declaration of a Site Area Emergency.
In some instances, the emergency classification resulting from this IC/EAL may be higher than that resulting from an assessment of the plant responses and symptoms against the Recognition Category F ICs/EALs.
This is appropriate in that the Recognition Category F ICs/EALs do not address the additional threat posed by a failure to shut down the reactor. The inclusion of this IC and EAL ensures the timely declaration of a Site Area Emergency in response to prolonged failure to shutdown the reactor. A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria.
Escalation of the emergency classification level would be via IC RG1 or FG1. CGS Basis Reference(s):
- 1. PPM 5.5.11 Alternate Control Rod Insertions
- 2. Technical Specifications Table 3.3.1.1-1
- 3. PPM 5.1.2 RPV Control -ATWS 4. PPM 5.2.1 Primary Containment Control, 5. NEI 99-01 SS5 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Category: M -System Malfunction Subcategory: 7 -Loss of Communications Initiating Condition:
Loss of all ons i te or offsite communications capabilities EAL: MU7 .1 Unusual Event (1) Loss of all Table 4 onsite communication methods OR (2) Loss of fill Table 4 ORO communication methods OR (3) Loss of all Table 4 NRC communication methods Table 4 Communication Methods System Onsite ORO Plant Public Address (PA) System x Plant Telephone System x x Plant Radio System Operations and x Security Channels Offsite calling capability from the Control x Room via direct telephone Long distance calling capability on the x commercial phone system Mode Applicability:
Basis: Major Rev: Draft Minor Rev: N/A Page: 130 of 203 NRC x x Onsite and offsite (ORO and NRC) communications include one or more of the systems listed i n Table 4 (ref. 1, 2). Public Address (PA) System The public address system provides a way of contacting personnel in the various buildings of the plant and locations of the site t hat might be inaccessible using other means of commun i cation. The buildingwide alarm system alerts (via the publ i c address system speakers) operating personnel to fire hazards a nd oth e r trouble conditions for which plant man a gement finds it necessary to alert pl a nt personn e l. Plant Telephone System This system consists of interconnections to the public telephone network (and trunks to the PBX) with individual direct li nes that provide i nward and outward dialing access to most plant locations.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 131 of 203 ATTACHMENT 7.1: EAL Technical Bases Plant Radio System Operations and Security Channels The radio communications system is used for communications with personnel involved in maintenance and security in and around the plant complex by means of hand-held portable radio units, mobile radio units, and paging receivers.
The telephone link to BPA provides a direct communication link to the BPA Dittmer Control Center. The radio communications system provides a communications link for security and emergency communications to local law enforcement agencies and emergency control centers. Offsite calling capability from the Control Room via direct telephone and fax lines This communications method includes following dedicated phone networks that are available for emergency communications in addition to the normal Energy Northwest phone network:
- Energy Northwest Emergency Center Network
- Response Agency Network
- NRC Emergency Notification System Various locations such as the Control Room, Technical Support Center, Emergency Operations Facility, Joint Information Center, Department of Energy-RL, Washington State Emergency Operations Center, Oregon State Emergency Coordination Center and the Benton and Franklin County Emergency Operations Centers have facsimile transceivers.
The facsimile transceivers enable the transmission and receipt of printed material.
The facsimile system which connects the Energy Northwest emergency centers with the county and state emergency centers uses dedicated phone lines. Long distance calling capability on the commercial phone system The Energy Northwest Richland phone system is a computer based, software controlled telephone exchange (Computerized Branch Exchange).
It is equipped with redundant computerized processor units and is served by an uninterruptible power supply. The direct-dial private telephone system provides communication between the Energy Northwest facilities.
The phone system is arranged such that plant telephones can reach other Energy Northwest facilities by direct-dialing and without the need of an operator.
This EAL is the hot condition equivalent of the cold condition EAL CU5.1. This IC addresses a significant loss of on-site or offsite communications capabilities.
While not a direct challenge to plant or personnel safety, this event warrants prompt notifications to OROs and the NRC. This IC should be assessed only when extraordinary means are being utilized to make communications possible (e.g., use of non-plant, privately owned equipment , relaying of on-site information via individuals or multiple radio transmission points, individuals being sent to offsite locations, etc.). Threshold
- 1 addresses a total loss of the communications methods used in support of routine plant operations.
Threshold
- 2 addresses a total loss of the communications methods used to notify all OROs of an emergency declaration. The OROs referred to here are Washington Stare, Benton County, Franklin County and DOE RL. Threshold
- 3 addresses a total loss of the communications methods used to notify the NRC of an emergency declaration.
CGS Basis Reference(s}:
- 1. Emergency Plan Section 6.6 2. FSAR Section 9.5.2 3. NEI 99-01 SU6 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 132 of 203 ATTACHMENT 7.1: EAL Technical Bases Category: M -System Malfunction Subcategory: 8 -Hazardous Event Affecting Safety Systems Initiating Condition:
Hazardous event affecting SAFETY SYSTEMS needed for the current operating mode EAL: MA8.1 Alert The occurrence of any Table 8 hazardous event AND Event damage has caused indications of degraded performance on one train of a SAFETY SYSTEM needed for the current operating mode AND EITHER: Event damage has caused indications of degraded performance to a second train of a SAFETY SYSTEM needed for the current operating mode OR Event damage has resulted in VISIBLE DAMAGE to a second train of a SAFETY SYSTEM needed for the current operating mode (Notes 9, 10) Note 9: If the affected SAFETY SYSTEM train was already inoperable or out of service before the hazardous event occurred, then emergency classification is not warranted.
Note 10: If the hazardous event only resulted in VISIBLE DAMAGE, with no indications of degraded performance to at least one train of a SAFETY SYSTEM, then this emergency classification is not warranted.
Table 8 Hazardous Events
- Seismic event
- Internal or external FLOODING event
- Tornado strike
- FIRE
- EXPLOSION
- Volcanic ash fallout
- Other events with similar hazard characteristics as determined by the Shift Manager Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 133 of 203 ATTACHMENT 7.1: EAL Technical Bases Mode Applicability:
Basis: This IC addresses a hazardous event that causes damage to SAFETY SYSTEMS needed for the current operating mode. In order to provide the appropriate context for consideration of an ALERT classification, the hazardous event must have caused indications of degraded SAFETY SYSTEM performance in one train, and there must be either indications of performance issues with the second SAFETY SYSTEM train or VISIBLE DAMAGE to the second train such that the potential exists for this second SAFETY SYSTEM train to have performance issues. In other words, in order for this EAL to be classified, the hazardous event must occur, at least one SAFETY SYSTEM train must have indications of degraded performance, and the second SAFETY SYSTEM train must have indications of degraded performance or VISIBLE DAMAGE such that the potential exists for performance issues. Note that this second SAFETY SYSTEM train is from the same SAFETY SYSTEM that has indications of degraded performance; commercial nuclear power plants are designed to be able to support single system issues without compromising public health and safety from radiological events. Indications of degraded performance addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available.
The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. VISIBLE DAMAGE addresses damage to a SAFETY SYSTEM train that is not in service/operation and that potentially could cause performance issues. Operators will make this determination based on the totality of available event and damage report information.
This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. This VISIBLE DAMAGE should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. The significance of a seismic event is discussed under EAL HU2.1 (ref. 1 ). Internal FLOODING may be caused by events such as component failures, equipment misalignment, or outage activity mishaps (ref. 2). Seismic Category I structures are analyzed to withstand a sustained, design wind velocity of at least 100 mph (ref. 3). Areas containing functions and systems required for safe shutdown of the plant are identified by Fire Areas in the fire response procedure (ref. 4). The potential for volcanic eruption exists in the Pacific Northwest.
Heavy ash fall, such as that experienced at certain locations following the eruption of Mt. St. Helens in 1980, could affect operation of plant equipment if precautionary measures are not taken. The design basis ash fall is projected for a twenty hour duration (ref. 5). Table 5 provides a list of CGS safety system structures/areas (ref. 6). Table 8 provides a list of hazardous events. Escalation of the emergency classification level would be via IC FS1 or RS1. CGS Basis Reference(s):
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 134 of 203 ATTACHMENT 7.1: EAL Technical Bases 1. FSAR Section 3.7 Seismic Design 2. FSAR Section 3.4.1 Flood Protection
- 3. CGS Calculation CALC CE-02-93-16 Evaluate PMR/BDC 98-0131-0A change from 5 min. to 15 min. averaging of 33 ft. elev. met twr. w i nd speeds for UE and Alert declarations
- 4. ABN-FIRE Attachment 13.2, Fire Areas 5. ABN-ASH Ash Fall 6. FSAR Table 3.2-1 Equipment Classification
- 7. NEI 99-01 SA9 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Category E -Independent Spent Fuel Storage Installation (ISFSI) EAL Group: ANY (EALs in this category are applicable to any plant condition, hot or cold) Major Rev: Draft Minor Rev: N/A Page: 135 of 203 An independent spent fuel storage installation (ISFSI) is a complex that is designed and constructed for the interim storage of spent nuclear fuel and other radioactive materials associated with spent fuel storage. A significant amount of the radioactive material contained within a cask/canister must escape its packaging and enter the biosphere for there to be a significant environmental effect resulting from an accident involving the dry storage of spent nuclear fuel. An Unusual Event is declared on the basis of the occurrence of an event of sufficient magnitude that a loaded cask CONFINEMENT BOUNDARY is damaged or violated.
A hostile security event that leads to a potential loss in the level of safety of the ISFSI is a classifiable event under Security category EAL HA 1.1.
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Sub-category:
ATTACHMENT 7.1: EAL Technical Bases E -ISFSI None Initiating Condition:
Damage to a loaded cask CONFINEMENT BOUNDARY EAL: EU1.1 Unusual Event Major Rev: Draft Minor Rev: N/A Page: 136 of 203 Damage to a loaded canister (MPC) CONFINEMENT BOUNDARY as indicated by measured dose rates on a loaded overpack GT EITHER:
- 20 mrem/hr (gamma+ neutron) on the top of the overpack
- 100 mrem/hr (gamma + neutron) on the side of the overpack, excluding inlet and outlet ducts Mode Applicability:
Storage Operations Basis: The Independent Spent Fuel Storage Installation utilizes the HOL TEC International (HOLTEC) STORM 100 Spent Fuel Dry Storage (SFDS) system. HI-STORM overpack or storage overpack means the cask that receives and contains the sealed multi-purpose canisters containing spent nuclear fuel. It provides the gamma and neutron shielding, ventilation passages, missile protection, and protection against natural phenomena and accidents for the MPC. (ref. 1, 2) The EAL threshold values represent two-times the limits specified in the ISFSI Certificate of Compliance Technical Specification Section 3.2, Radiation Protection Program (ref. 2). CGS has casks loaded to various amendments to the Certificate of Compliance (COC) Technical Specifications.
The numbers above reflect the most limiting Technical Specification
{TS} values (Amendment 1 ). This IC addresses an event that results in damage to the CONFINEMENT BOUNDARY of a storage cask containing spent fuel. It applies to irradiated fuel that is licensed for dry storage beginning at the point that the loaded storage cask is sealed. The issues of concern are the creation of a potential or actual release path to the environment, degradation of one or more fuel assemblies due to environmental factors, and configuration changes which could cause challenges in removing the cask or fuel from storage. The existence of "damage" is determined by radiological survey. The technical specification multiple of "2 times", which is also used in Recognition Category RIC RU1, is used here to distingu i sh between non-emergency and emergency conditions.
The emphasis for this classification is the degradation in the level of safety of the spent fuel cask and not the magnitude of the associated dose or dose rate. It is recognized that in the case of extreme damage to a loaded cask, the fact that the "on-contact" dose rate limit is exceeded may be determined based on measurement of a dose rate at some distance from the cask. Security-related events for ISFSls are covered under ICs HU1 and HA1.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 137 of 203 ATTACHMENT 7.1: EAL Technical Bases CGS Basis Reference(s):
- 1. ABN-ISFSI, ISFSI Abnormal Conditions
- 2. ISFSI Certificate of Compliance No. 1014 Amendment 1, Appendix A, Technical Specifications for the HI-STORM 100 Cask Syste_m, Section 3.2 Radiation Protection Program 3. NEI 99-01 E-HU1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.1: EAL Technical Bases Category F -Fission Product Barrier Degradation EAL Group: Hot Conditions (RCS temperature GT 200°F); EALs in this category are applicable only in one or more hot operating modes. Major Rev: Draft Minor Rev: N/A Page: 138 of 203 EALs in this category represent threats to the defense in depth design concept that precludes the release of highly radioactive fission products to the environment.
This concept relies on multiple physical barriers any one of which, if maintained intact, precludes the release of significant amounts of radioactive fission products to the environment.
The primary fission product barriers are: A. Fuel Clad (FC): The Fuel Clad Barrier consists of the cladding material that contains the fuel pellets. B. Reactor Coolant System (RCS): The RCS Barrier is the reactor coolant system pressure boundary and includes the RPV and all reactor coolant system piping out to and including the isolation valves. C. Containment (PC): The drywell, the wetwell, their respective interconnecting paths, and other connections up to and including the outermost containment isolation valves comprise the PC barrier. Containment Barrier thresholds are used as criteria for escalation of the ECL from Alert to either a Site Area Emergency or a General Emergency.
The EALs in this category require evaluation of the loss and potential loss thresholds listed in the fission product barrier matrix of Table F-1 (Attachment 2). "Loss" and "Potential Loss" signify the relative damage and threat of damage to the barrier. "Loss" means the barrier no longer assures containment of radioactive materials. "Potential Loss" means integrity of the barrier is threatened and could be lost if conditions continue to degrade. The number of barriers that are lost or potentially lost and the following criteria determine the appropriate emergency classification level: Alert: Any loss or any potential loss of either Fuel Clad or RCS Site Area Emeraencv:
Loss or potential loss of any two barriers General Emergencv:
Loss of any two barriers and loss or potential loss of third barrier The logic used for emergency classification based on fission product barrier monitoring should reflect the following considerations:
- The Fuel Clad Barrier and the RCS Barrier are weighted more heavily than the Containment Barrier.
- Unusual Event ICs associated with RCS and Fuel Clad Barriers are addressed under System Malfunction ICs.
- For accident conditions involving a radiological release, evaluation of the fission product barrier thresholds will need to be performed in conjunction with dose assessments to ensure correct and timely escalation of the emergency classification.
For example, an evaluation of the fission product barrier thresholds may result in a Site Area Emergency classification while a dose assessment may indicate that an EAL for General Emergency IC RG1 has been exceeded.
- The fission product barrier thresholds specified within a scheme reflect CGS design and operating characteristics.
Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 139 of 203 ATTACHMENT 7.1: EAL Technical Bases
- As used in this category, the term RCS leakage encompasses not just those types defined in Technical Specifications but also includes the loss of RCS mass to any location-inside the containment, an interfacing system, or outside of the containment.
The release of liquid or steam mass from the RCS due to the as-designed/expected operation of a relief valve is not considered RCS leakage.
- At the Site Area Emergency level, EAL users should maintain cognizance of how far present conditions are from meeting a threshold that would require a General Emergency declaration.
For example, if the Fuel Clad and RCS fission product barriers were both lost, there should be frequent assessments of containment radioactive inventory and integrity.
Alternatively, if both the Fuel Clad and RCS fission product barriers were potentially lost, the Emergency Director would have more assurance that there was no immediate need to escalate to a General Emergency.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 140 of 203 ATTACHMENT 7.1: EAL Technical Bases Category:
Fission Product Barrier Degradation Subcategory:
N/A Initiating Condition:
Any loss or any potential loss of either Fuel Clad or RCS EAL: FA1.1 Alert Any loss or any potential loss of EITHER Fuel Clad or RCS barrier (Table F-1) Mode Applicability:
Basis: Fuel Clad, RCS and Containment comprise the fission product barriers.
Table F-1 (Attachment
- 2) lists the fission product barrier thresholds, bases and references.
At the Alert classification level, Fuel Clad and RCS barriers are weighted more heavily than the Containment barrier. Unlike the Containment barrier, loss or potential loss of either the Fuel Clad or RCS barrier may result in the relocation of radioactive materials or degradation of core cooling capability.
Note that the loss or potential loss of Containment barrier in combination with loss or potential loss of either Fuel Clad or RCS barrier results in declaration of a Site Area Emergency under EAL FS1.1 CGS Basis Reference(s):
- 1. NEI 99-01 FA1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/ A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 141 of 203 ATTACHMENT 7.1: EAL Technical Bases Category:
Fission Product Barrier Degradation Subcategory:
N/A Initiating Condition:
Loss or potential loss of any two barriers EAL: FS1 .1 Site Area Emergency Loss or potential loss of any two barriers (Table F-1) Mode Applicability:
Basis: Fuel Clad, RCS and Containment comprise the fission product barriers.
Table F-1 (Attachment
- 2) lists the fission product barrier thresholds, bases and references. At the Site Area Emergency class i fication level, each barrier is weighted equally. A Site Area Emergency is therefore appropriate for any combination of the following conditions:
- One barrier loss and a second barrier loss (i.e., loss -loss)
- One barrier loss and a second barrier potential loss (i.e., loss -potential loss)
- One barrier potential loss and a second barrier potential loss (i.e., potential loss -potential loss) At the Site Area Emergency classification level, the ability to dynamically assess the proximity of present conditions with respect to the threshold for a General Emergency is important.
For example, the existence of Fuel Clad and RCS Barrier loss thresholds in addition to offs i te dose assessments would require continual assessments of radioactive inventory and Conta i nment integrity in anticipation of reaching a General Emergency classification.
Alternat i vely , if both Fuel Clad and RCS potential loss thresholds existed , the Emergency Director would have greater assurance that escalation to a General Emergency is less imminent.
CGS Basis Reference(s):
- 1. NEI 99-01 FS1 Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Category:
Subcategory:
ATTACHMENT 7.1: EAL Technical Bases Fission Product Barrier Degradation N/A Major Rev: Draft Minor Rev: N/A Page: 142 of 203 Initiating Condition:
Loss of any two barriers and loss or potential loss of third barrier EAL: FG1.1 General Emergency Loss of any two barriers AND Loss or potential loss of third barrier (Table F-1) Mode Applicability:
Basis: Fuel Clad, RCS and Containment comprise the fission product barriers.
Table F-1 (Attachment
- 2) lists the fission product barrier thresholds, bases and references.
At the General Emergency classification level each barrier is weighted equally. A General Emergency is therefore appropriate for any combination of the following conditions:
- Loss of Fuel Clad, RCS and Containment barriers
- Loss of Fuel Clad and RCS barriers with potential loss of Containment barrier
- Loss of RCS and Containment barriers with potential loss of Fuel Clad barrier
- Loss of Fuel Clad and Containment barriers with potential loss of RCS barrier CGS Basis Reference(s):
- 1. NEI 99-01 FG1 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 143 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Introduction Table F-1 lists the threshold conditions that define the Loss and Potential Loss of the three fission product barriers (Fuel Clad, Reactor Coolant System, and Containment).
The table is structured so that each of the three barriers occupies adjacent columns. Each fission product barrier column is further divided into two columns; one for Loss thresholds and one for Potential Loss thresholds.
The first column of the table (to the left of the Fuel Clad Loss column) lists the categories (types) of fission product barrier thresholds.
The fission product barrier categories are: A. RPV Water Level 8. RCS Leak Rate B. PC Conditions C. PC Radiation I RCS Activity D. PC Integrity or Bypass E. Emergency Director Judgment Each category occupies a row in Table F-1 thus forming a matrix defined by the categories.
The intersection of each row with each Loss/Potential Loss column forms a cell in which one or more fission product barrier thresholds appear. If NEI 99-01 does not define a threshold for a barrier Loss/Potential Loss, the word "None" is entered in the cell. Thresholds are assigned sequential numbers within each Loss and Potential Loss column beginning with number one. In this manner , a threshold can be identified by its category title and number. For example, the first Fuel Clad barrier Loss in Category A would be assigned "FC Loss A.1," the third Containment barrier Potential Loss would be assigned "PCP-Loss B.3," etc. If a cell in Table F-1 contains more than one numbered threshold, each of the numbered thresholds, if exceeded, signifies a Loss or Potential Loss of the barrier. It is not necessary to exceed all of the thresholds in a category before declaring a barrier Loss/Potential Loss. Subdivision of Table F-1 by category facilitates association of plant conditions to the applicable fission product barrier Loss and Potential Loss thresholds.
This structure promotes a systematic approach to assessing the classification status of the fission product barriers.
When equipped with knowledge of plant conditions related to the fission product barriers, the EAL-user first scans down the category column of Table F-1 , locates the likely category and then reads across the fission product barrier Loss and Potential Loss thresholds in that category to determine if a threshold has been exceeded.
If a threshold has not been exceeded, the EAL-user proceeds to the next likely category and continues review of the thresholds in the new category If the EAL-user determines that any threshold has been exceeded, by definition, the barrier is lost or potentially lost -even if multip l e thresholds in the same barrier column are exceeded, only that one barrier is lost or potentially lost. The EAL-user must examine each of the three fission product barriers to determine if other barrier thresholds in the category are lost or potentially lost. For example, if containment rad i ation is sufficiently high, a Loss of the Fuel Clad and RCS barriers and a Potential Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 144 of 203 ATTACHMENT 7 .2: Fission Product Barrier Matrix and Bases Loss of the primary containment barrier can occur. Barrier Losses and Potential Losses are then applied to the algorithms given in EALs FG1 .1, FS1 .1, and FA1 .1 to determine the appropriate emergency classification.
In the remainder of this Attachment, the Fuel Clad barrier threshold bases appear first, followed by the RCS barr i er and finally the Containment barrier threshold bases. In each barrier, the bases are given according category Loss followed by category Potential Loss beginning with Category A, then B, ... , F.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 145 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Table F-1 Fission Product Barrier Threshold Matrix FC -Fuel Clad Barrier RCS -Reactor Coolant System Barrier PC -Containment Barrier Category Loss Potential Loss Loss Potential Loss Loss Potential Loss A RPV level cannot be restored and RPV level cannot be restored and SAG entry required maintained GT -161 in. maintained GT -161 in. None None SAG entry required RPVWater or cannot be determined or cannot be determined Level UNISOLABLE break in fil!Y of the UNISOLABLE primary system following:
UNISOLABLE primary system leakage leakage that results in exceeding . Main steam lines that results in exceeding EITHER: EITHER: B . RCIC steam Line RB area temperature alarm level RB area maximum safe operating None None . RWCU (PPM 5.3.1Table23) temperature (PPM 5.3.1Table23)
None RCS . Feedwater Leak Rate OR OR OR RB area radiation alarm level RB area maximum safe operating Emergency RPV Depressurization is (PPM 5.3.1Table24) required radiation (PPM 5.3.1Table24)
PC pressure GT 45 psig UNPLANNED rapid drop in PC OR c pressure following PC pressure rise Explosive mixture exists inside PC (H 2 None None PC pressure GT 1.68 psig None OR GE 6% and 0 2 GE 5%) PC due to RCS leakage Conditions PC pressure response not consistent OR with LOCA conditions WW temperature and RPV pressure cannot be maintained below the HCTL Containment Radiation Monitor D CMS-RIS-27E or CMS-RIS-27F reading GT 3,600 R/hr Containment Radiation Monitor CMS-Containment Radiation Monitor CMS-PC Rad/ OR None RIS-27E or CMS-RIS-27F reading None None RIS-2 7E or CMS-RIS-27F reading RCS GT 70 R/hr GT 14,000 R/hr Activity Primary coclant activity GT 300 µCVgm dose equivalent 1-131 UNISOLABLE direct downstream E pathway to the environment exists None None None None after PC isolation signal None PC Integrity OR or Bypass Intentional PC venting per EOPs F in the opinion of the condition in the opinion of the condition in the opinion of the condition in the opinion of the condition in the opinion of the condition in the op i nion of the Emergency Emergency Director that indicates Emergency Dire cto r that indicates Emergency Director that indicates Emergency Director that indicates Emergency Director that indicates Emergency Director that indicates potential loss of the Containment Director loss of the fuel c lad barrier potential loss of the fuel clad barrier loss of the RCS barrier potential loss of the RCS barrier loss of the Containment barrier barrier Judgment Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 146 of 203 ATTACHMENT 7 .2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
A. RPV Level Degradation Threat: Loss Threshold:
I SAG entry required Basis: EOP flowcharts provide instructions to assure adequate core cooling by restoring and maintaining RPV water level above prescribed limits, operate sufficient RPV injection sources to assure adequate core cooling, and assess the possibility of core damage when RPV level cannot be determined.
The Fuel Clad Loss threshold conditions are the EOP flowchart conditions that signal a loss of adequate core cooling and a requirement to exit all EOPs and enter the SAGs (ref. 1-6). This threshold is also a Loss of the RCS barrier (RCS Loss A) and a Potential Loss of the Containment barrier (PCP-Loss A), and therefore represents a Loss of two barriers and a Potential Loss of a third , which requires a General Emergency classification.
The Loss threshold represents the EOP requirement for entry to the Severe Accident Guidelines (SAGs). CGS Basis Reference(s):
- 1. PPM 5.1.1 RPV Control 2. PPM 5.1.2 RPV Control -ATWS 3. Calculation NE-02-03-06 Attachment 10 RPV Variables
- 4. PPM 5.0.10 Flowchart Training Manual 5. PPM 5.1.4 RPV Flooding 6. PPM 5.1.6 RPV Flooding -ATWS 7. NEI 99-01 RPV Water Level Fuel Clad Loss 2.A Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 147 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
A. RPV Level Degradation Threat: Potential Loss Threshold:
RPV level cannot be restored and maintained GT -161 in. or cannot be determined Basis: An RPV water level instrument reading of -161 in. indicates RPV level is at the top of active fuel (TAF) (ref. 1, 2). When RPV level is at or above the TAF, the core is completely submerged.
Core submergence is the most desirable means of core cooling. When RPV level is below TAF, the uncovered portion of the core must be cooled by less reliable means (i.e., steam cooling or spray cooling).
If core uncovery is threatened, the EOPs specify alternate, more extreme, RPV water level control measures in order to restore and maintain adequate core cooling. Since core uncovery begins if RPV level drops to TAF, the level is indicative of a challenge to core cooling and the Fuel Clad barrier. When RPV level cannot be determined, EOPs require RPV flooding strategies.
RPV water level indication provides the primary means of knowing if adequate core cooling is being maintained.
When all means of determining RPV level are unavailable, the fuel clad barrier is threatened and reliance on alternate means of assuring adequate core cooling must be attempted.
The instructions in PPM 5.1.4 and PPM 5.1.6 specify these means, which include emergency depressurization of the RPV and injection into the RPV at a rate needed to flood to the elevation of the main steam lines or hold RPV pressure above the Minimum Steam Cooling Pressure (in ATWS events) (ref. 3, 4). If RPV level cannot be determined with respect to the top of active fuel, a potential loss of the fuel clad barrier exists. This water level corresponds to the top of the active fuel and is used in the EOPs to indicate a challenge to core cooling. The RPV water level threshold is the same as RCS barrier Loss RPV Water Level threshold
.A. Thus, this threshold indicates a Potential Loss of the Fuel Clad barrier and a Loss of the RCS barrier that appropriately escalates the emergency classification level to a Site Area Emergency.
This threshold is considered to be exceeded when, as specified in the site-specific EOPs, RPV water cannot be restored and maintained above the specified level following depressurization of the RPV (either manually, automatically or by failure of the RCS barrier) or when procedural guidance or a lack of low pressure RPV injection sources preclude Emergency RPV depressurization.
EOPs allow the operator a wide choice of RPV injection sources to consider when restoring RPV water level to within prescribed limits. EOPs also specify depressurization of the RPV in order to facilitate RPV water level control with low-pressure i njection sources. In some events, elevated RPV pressure may prevent restoration of RPV water level until pressure drops below the shutoff heads of available injection sources. Therefore, this Fuel Clad barrier Potential Loss is met only after either: 1) the RPV has been depressurized, or required emergency RPV depressurization has been attempted, giving the operator an opportunity to assess the capab i lity of low-pressure injection sources to restore RPV water level or 2) no low pressure RPV injection systems are available, precluding RPV depressurization in an attempt to minimize loss of RPV inventory.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 148 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases The term "cannot be restored and maintained above" means the value of RPV water level is not able to be brought above the specified limit (top of active fuel). The determination requires an evaluation of system performance and availability in relation to the RPV water level value and trend. A threshold prescribing declaration when a threshold value cannot be restored and maintained above a specified limit does not require immediate action simply because the current value is below the top of active fuel, but does not permit extended operation below the limit; the threshold must be considered reached as soon as it is apparent that the top of active fuel cannot be attained.
In high-power ATWS/failure to scram events, EOPs may direct the operator to deliberately lower RPV water level to the top of active fuel in order to reduce reactor power. RPV water level is then controlled between the top of active fuel and the Minimum Steam Cooling RPV Water Level (MSCRWL).
Although such action is a challenge to core cooling and the Fuel Clad barrier, the immediate need to reduce reactor power is the higher priority.
For such events, ICs MA6 or MS6 will dictate the need for emergency classification.
Since the loss of ability to determine if adequate core cooling is being provided presents a significant challenge to the fuel clad barrier, a potential loss of the fuel clad barrier is specified.
CGS Basis Reference(s):
- 1. Calculation NE-02-03-05 Attachment 3 Note 8 2. PPM 5.1.1 RPV Control 3. PPM 5.1.4 RPV Flooding 4. PPM 5.1.6 RPV Flooding -ATWS 5. PPM 5.1.2 RPV Control -ATWS 6. NEI 99-01 RPV Water Level Fuel Clad Potential Loss 2.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 149 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
B. RCS Leak Rate Degradation Threat: Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 150 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
B. RCS Leak Rate Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 151 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
C. PC Conditions Degradation Threat: Loss Threshold:
I None Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 152 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
C. PC Conditions Degradation Threat: Potential Loss Threshold:
None Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 153 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
D. PC Radiation I RCS Activity Degradation Threat: Loss Threshold:
Containment Radiation Monitor CMS-RIS-27E or CMS-RIS-27F reading GT 3,600 R/hr Basis: Four high range area radiation detectors (CMS-RE-27A, B, E and F) are installed to monitor the drywell. CMS-RE-27 A and -27B are located in the bioshield wall at elevations 522' and 525', azimuth 60° and 297°, respectively.
CMS-RE-27E and -27F are located inside containment at elevation 515', azimuth 290° and 51.5°, respectively.
The companion containment radiation monitors (CMS-RIS-27A, B, E and F) are located on RAD Boards 22 and 23 in the Main Control Room. (ref. 1) The threshold value was calculated assuming the instantaneous release and dispersal of the reactor coolant noble gas and iodine inventory associated with a concentration of 300 µCi/gm dose equivalent 1-131 (or approximately 5% clad failure) into the drywell atmosphere.
Evaluation of detector location, geometry and anticipated response suggests CMS-RIS-27E or F will provide the desired response to a given radiation source in the drywell and are , therefore , identified as the preferred monitors for evaluating this Fuel Clad Loss threshold. (ref. 2) The radiation monitor reading corresponds to an instantaneous release of all reactor coolant mass into the primary containment, assuming that reactor coolant activity equals 300 µC i/gm dose equivalent 1-131. Reactor coolant activity above this level is greater than that expected for iodine spikes and corresponds to an approximate range of 2% to 5% fuel clad damage. Since this condition indicates that a significant amount of fuel clad damage has occurred, it represents a loss of the Fuel Clad Barrier. The radiation monitor reading in this threshold is higher than that specified for RCS Barrier Loss threshold D since it indicates a loss of both the Fuel Clad Barrier and the RCS Barrier. Note that a combination of the two monitor readings appropriately escalates the emergency classification level to a Site Area Emergency.
There is no Potential Loss threshold associated with primary containment radiation.
CGS Basis Reference(s):
- 1. TM-2117 TSG -Core Thermal Engineer , Attachment 4.2 2. Calculation NE-02-94-57
- 2. NEI 99-01 Primary Containment Radiation Fuel Clad Loss 4.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 154 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
D. PC Radiation I RCS Activity Degradation Threat: Loss Threshold:
Primary coolant activity GT 300 µCi/gm dose equivalent 1-131 Basis: This threshold indicates that RCS radioactivity concentration is greater than 300 µCi/gm Dose Equivalent 1-131. Reactor coolant activity above this level is greater than that expected for iodine spikes and corresponds to an approximate range of 2% to 5% fuel clad damage. Since this condition indicates that a significant amount of fuel clad damage has occurred, it represents a loss of the Fuel Clad Barrier. It is recognized that sample collection and analysis of reactor coolant with highly elevated activity levels could require several hours to complete.
Nonetheless, a sample-related threshold is included as a backup to other indications.
There is no Potential Loss threshold associated with RCS Activity.
CGS Basis Reference(s):
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 155 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
D. PC Radiation I RCS Activity Degradation Threat: Potential Loss Threshold:
[None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 156 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
E. PC Integrity or Bypass Degradation Threat: Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 157 of 203 ATTACHMENT 7.2: Fission Produc t Barrier Matrix and Bases Barrier: Fuel Clad Category:
E. PC Integrity or Bypass Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 158 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
F. Emergency Director Judgment Degradation Threat: Loss Threshold:
Any condition in the opinion of the Emergency Director that indicates loss of the Fuel Clad barrier Basis: The Emergency Director judgment threshold addresses any other factors relevant to determining if the Fuel Clad barrier is lost. Such a determination should include imminent barrier degradation, barrier monitoring capability and dominant accident sequences.
- Imminent barrier degradation exists if the degradation will likely occur within two hours based on a projection of current safety system performance.
The term "imminent" refers to recognition of the inability to reach safety acceptance criteria before completion of all checks.
- Barrier monitoring capability is decreased if there is a loss or lack of reliable indicators.
This assessment should include instrumentation operability concerns, readings from portable instrumentation and consideration of offsite monitoring results.
- Dominant accident sequences lead to degradation of all fission product barriers and likely entry to the EOPs. The Emergency Director should be mindful of the Loss of AC power (Station Blackout) and ATWS EALs to assure timely emergency classification declarations.
This threshold addresses any other factors that are to be used by the Emergency Director in determining whether the Fuel Clad barrier is lost. CGS Basis Reference(s):
- 1. NEI 99-01 Emergency Director Judgment Fuel Clad Loss 6.A Number: 13.1.1A J Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 159 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Fuel Clad Category:
F. Emergency Director Judgment Degradation Threat: Potential Loss Threshold:
Any condition in the opinion of the Emergency Director that indicates potential loss of the Fuel Clad barrier Basis: The Emergency Director judgment threshold addresses any other factors relevant to determining if the Fuel Clad barrier is potentially lost. Such a determination should include imminent barrier degradation, barrier monitoring capability and dominant accident sequences.
- Imminent barrier degradation exists if the degradation will likely occur within two hours based on a projection of current safety system performance.
The term "imminent" refers to recognition of the inability to reach safety acceptance criteria before completion of all checks.
- Barrier monitoring capability is decreased if there is a loss or lack of reliable indicators.
This assessment should include instrumentation operability concerns, readings from portable instrumentation and consideration of offsite monitoring results.
- Dominant accident sequences lead to degradation of all fission product barriers and likely entry to the EOPs. The Emergency Director should be mindful of the Loss of AC power (Station Blackout) and ATWS EALs to assure timely emergency classification declarations.
This threshold addresses any other factors that are to be used by the Emergency Director in determining whether the Fuel Clad barrier is potentially lost. The Emergency Director should also consider whether or not to declare the barrier potentially lost in the event that barrier status cannot be monitored.
CGS Basis Reference(s):
- 1. NEI 99-01 Emergency Director Judgment Potential Fuel Clad Loss 6.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 160 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
A. RPV Water Level Degradation Threat: Loss Threshold:
RPV level cannot be restored and maintained GT -161 in. or cannot be determined Basis: An RPV water level instrument reading of -161 in. indicates level is at the top of active fuel (TAF) (ref. 1, 2). TAF is significantly lower than the normal operating RPV level control band. To reach this level, RPV inventory loss would have previously required isolation of the RCS and PC barriers, and initiation of all ECCS. If RPV water level cannot be maintained above TAF, ECCS and other sources of RPV injection have been ineffective or incapable of reversing the decreasing level trend. The cause of the loss of RPV inventory is therefore assumed to be a LOCA. By definition, a LOCA event is a Loss of the RCS barrier. When RPV water level cannot be determined, EOPs require RPV flooding strategies.
RPV water level indication provides the primary means of knowing if adequate core cooling is being maintained.
The instructions in PPM 5.1.4 and PPM 5.1.6 specify emergency depressurization of the RPV, which is defined to be a Loss of the RCS barrier (RCS Loss B threshold
- 2). (ref. 3, 4) The conditions of this threshold are also a Potential Loss of the Fuel Clad barrier (FC P-Loss A). A Loss of the RCS barrier and Potential Loss of the Fuel Clad barrier requires a Site Area Emergency classification.
This water level corresponds to the top of active fuel and is used in the EOPs to indicate challenge to core cooling. The RPV water level threshold is the same as the Fuel Clad barrier RPV Water Level Potential Loss threshold.
Thus, this threshold indicates a Loss of the RCS barrier and Potential Loss of the Fuel Clad barrier and that appropriately escalates the emergency classification level to a Site Area Emergency.
This threshold is considered to be exceeded when, as specified in the site-specific EOPs, RPV water cannot be restored and maintained above the specified level following depressurization of the RPV (either manually, automatically or by failure of the RCS barrier) or when procedural guidance or a lack of low pressure RPV injection sources preclude Emergency RPV depressurization.
EOPs allow the operator a wide choice of RPV injection sources to consider when restoring RPV water level to within prescribed limits. EOPs also specify depressurization of the RPV in order to facilitate RPV water level control with low-pressure injection sources. In some events, elevated RPV pressure may prevent restoration of RPV water level until pressure drops below the shutoff heads of available injection sources. Therefore, this RCS barrier Loss is met only after either: 1) the RPV has been depressurized, or required emergency RPV depressurization has been attempted, giving the operator an opportunity to assess the capability of low-pressure injection sources to restore RPV water level or 2) no low pressure RPV injection systems are available, precluding RPV depressurization in an attempt to minimize loss of RPV inventory.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 161 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases The term, "cannot be restored and maintained above," means the value of RPV water level is not able to be brought above the specified limit (top of active fuel). The determination requires an evaluation of system performance and availability in relation to the RPV water level value and trend. A threshold prescribing declaration when a threshold value cannot be restored and maintained above a specified limit does not require immediate action simply because the current value is below the top of active fuel, but does not permit extended operation beyond the limit; the threshold must be considered reached as soon as it is apparent that the top of active fuel cannot be attained.
In high-power ATWS/failure to scram events, EOPs may direct the operator to deliberately lower RPV water level to the top of active fuel in order to reduce reactor power. RPV water level is then controlled between the top of active fuel and the Minimum Steam Cooling RPV Water Level (MSCRWL).
Although such action is a challenge to core cooling and the Fuel Clad barrier, the immediate need to reduce reactor power is the higher priority.
For such events, ICs MA6 or MS6 will dictate the need for emergency classification.
There is no RCS Potential Loss threshold associated with RPV Water Level. CGS Basis Reference(s):
- 1. Calculation NE-02-03-05 Attachment 3 Note 8 2. PPM 5.1.1 RPV Control 3. PPM 5.1.4 RPV Flooding 4. PPM 5.1.6 RPV Flooding -ATWS 5. PPM 5.1.2 RPV Control -ATWS 6. NEI 99-01 RPV Water Level RCS Loss 2.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 162 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
A. RPV Water Level Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 163 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
B. RCS Leak Rate Degradation Threat: Loss Threshold:
UNISOLABLE break in any of the following:
- RCIC steam line
- Feedwater Basis: The conditions of this threshold include required containment isolation failures allowing a flow path to the environment.
A release pathway outside primary containment exists when flow is not prevented by downstream isolations.
In the case of a failure of both isolation valves to close but in which no downstream flowpath exists, emergency declaration under this threshold would not be required.
Similarly, if the emergency response requires the normal process flow of a system outside containment (e.g., EOP requirement to bypass MSIV low RPV water level interlocks and maintain the main condenser as a heat sink using main turbine bypass valves), the threshold is not met. The combination of these threshold conditions represent the loss of both the RCS and Containment (see PC Loss E Threshold
- 1) barriers and justifies declaration of a Site Area Emergency (i.e., Loss or Potential Loss of any two barriers). (ref.1-4)
Even though RWCU and Feedwater systems do not contain steam, they are included in the list because an unisolable break could result in the high-pressure discharge of fluid that is flashed to steam from relatively large volume systems directly connected to the RCS. (ref. 1) Large high-energy lines that rupture outside primary containment can discharge significant amounts of inventory and jeopardize the pressure-retaining capability of the RCS until they are isolated.
If it is determined that the ruptured line cannot be promptly isolated from the control room, the RCS barrier Loss threshold is met. CGS Basis Reference(s):
- 1. FSAR Section 5.4.5 2. FSAR Section 5.4.6 3. FSAR Section 5.4.8 4. FSAR Section 10.3 5. NEI 99-01 RCS Leak Rate RCS Loss 3.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 164 of 203 ATTACHMENT 7 .2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
B. RCS Leak Rate Degradation Threat: Loss Threshold:
Emergency RPV Depressurization is required Basis: Plant symptoms requiring Emergency RPV Depressurization per the EOPs are indicative of a loss of the RCS barrier. Emergency RPV Depressurization is specified in the EOP flowcharts when symbols containing the phrase "EMERG DEPRESS REQ'D" are reached (ref. 1-7). If Emergency RPV Depressurization is required, the plant operators are directed to open safety relief valves (SRVs) and keep them open as needed to maintain adequate core cooling with available injection sources (ref. 8, 9). Even though the RCS is being vented into the suppression pool, a loss of the RCS exists due to the diminished effectiveness of the RCS pressure barrier to a release of fission products beyond its boundary.
Emergency RPV Depressurization in accordance with the EOPs is indicative of a loss of the RCS barrier. If Emergency RPV Depressurization is performed, the plant operators are directed to open safety relief valves (SRVs) and keep them open. Even though the RCS is being vented into the suppression pool, a Loss of the RCS barrier exists due to the diminished effectiveness of the RCS to retain fission products within its boundary.
CGS Basis Reference(s):
- 1. PPM 5.1.1 RPV Control 2. PPM 5.1.2 RPV Control -ATWS 3. PPM 5.1.4 RPV Flooding 4. PPM 5.1.6 RPV Flooding -ATWS 5. PPM 5.2.1 Primary Containment Control 6. PPM 5.3.1 Secondary Containment Control 7. PPM 5.4.1 Radioactivity Release Control 8. PPM 5.1.3 Emergency RPV Depressurization
-ATWS 10. NEI 99-01 RCS Leak Rate RCS Loss 3.B Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
B. RCS Leak Rate Degradation Threat: Potential Loss Threshold:
UNISOLABLE primary system leakage that results in exceeding EITHER: Basis: RB area temperature alarm level (PPM 5.3.1 Table 23) OR RB area radiation alarm level (PPM 5.3.1 Table 24) Major Rev: Draft Minor Rev: N/A Page: 165 of 203 The presence of elevated general area temperatures or radiation levels in the secondary containment may be indicative of unisolable primary system leakage outside the primary containment.
The PPM 5.3.1 Table 23 and Table 24 alarm levels define this RCS threshold because they are the maximum normal operating values and signify the onset of abnormal system operation.
When parameters reach this level, equipment failure or misoperation may be occurring.
Elevated parameters may also adversely affect the ability to gain access to or operate equipment within the affected area. The locations into which the primary system discharge is of concern correspond to the areas addressed in PPM 5.3.1 Tables 23 and 24 (ref. 1 ). Area temperature alarms are provided by the leak detection and reactor building recirculation air (RRA) systems (ref. 2) The ARM alarm setpoints listed in Table 24 vary due to plant operating mode and Health Physics radiation surveys. A program is established to maintain the current setpoint values in PPM 4.602.A5 for annunciator window 3-1; thus, reference is made to the annunciator response procedure in Table 24. (ref. 2) In general, multiple indications should be used to determine if a primary system is discharging outside primary containment.
For example, a high area radiation condition does not necessarily indicate that a primary system is discharging into the secondary containment since this may be caused by radiation shine from nearby steam lines or the movement of radioactive materials.
Conversely, a high area radiation condition in conjunction with other indications (e.g. room flooding, high area temperatures, reports of steam in the secondary containment, an unexpected rise in feedwater flowrate, or unexpected main turbine control valve closure) may indicate that a primary system is discharging into the secondary containment.
Potential loss of RCS based on primary system leakage outside the primary containment is determined from EOP temperature or radiation Max Normal Operating values in areas such as main steam line tunnel, RCIC, etc., which indicate a direct path from the RCS to areas outside primary containment.
A Max Normal Operating value is the highest value of the identified parameter expected to occur during normal plant operating conditions with all directly associated support and control systems functioning properly.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 166 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases The indicators reaching the threshold barriers and confirmed to be caused by RCS leakage from a primary system warrant an Alert classification.
A primary system is defined to be the pipes, valves, and other equipment which connect directly to the RPV such that a reduction in RPV pressure will effect a decrease in the steam or water being discharged through an unisolated break in the system. An UNISOLABLE leak which is indicated by Max Normal Operating values escalates to a Site Area Emergency when combined with Containment Barrier Loss threshold 3.A (after a containment isolation) and a General Emergency when the Fuel Clad Barrier criteria is also exceeded.
CGS Basis Reference(s):
- 1. PPM 5.3.1 Secondary Containment Control 2. PPM 5.0.10 Flowchart Training Manual 3. NEI 99-01 RCS Leak Rate RCS Potential Loss 3.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 167 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
C. PC Conditions Degradation Threat: Loss Threshold:
PC pressure GT 1 .68 psig due to RCS leakage Basis: The drywell high pressure scram setpoint is an entry condition to the EOP flowcharts:
PPM 5.1.1, RPV Control, and PPM 5.2.1, Primary Containment Control (ref. 1, 2, 3). Normal primary containment (PC) pressure control functions such as operation of drywall cooling and venting through SGT are specified in PPM 5.2.1 in advance of less desirable but more effective functions such as operation of drywall or wetwell sprays. In the CGS design basis, primary containment pressures above the drywall high pressure scram setpoint are assumed to be the result of a high-energy release into the containment for which normal pressure control systems are inadequate or incapable of reversing the increasing pressure trend. Pressures of this magnitude, however, can be caused by non-LOCA events such as a loss of drywall cooling or inability to control primary containment vent/purge (ref. 3). The threshold phrase " ... due to RCS leakage" focuses the barrier failure on the RCS instead of the non-LOCA malfunctions that may adversely affect primary containment pressure. Primary containment pressure greater than 1.68 psig with corollary indications (e.g., elevated drywall temperature, indications of loss of RCS inventory) should therefore be considered a Loss of the RCS barrier. Loss of drywall cooling that results in pressure greater than 1.68 psig should not be considered an RCS barrier loss. 1.68 psig is the drywall high pressure setpoint which indicates a LOCA by automatically initiating the ECCS or equivalent makeup system. There is no Potential Loss threshold associated with drywall pressure.
CGS Basis Reference(s):
- 1. Technical Specifications Table 3.3.5.1-1 2. PPM 5.1.1 RPV Control 3. PPM 5.2.1 Primary Containment Control 4. FSAR Section 6 5. NEI 99-01 Primary Containment Pressure RCS Loss 1.A Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 168 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
C. PC Conditions Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 169 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
D. PC Radiation I RCS Activity Degradation Threat: Loss Threshold:
Containment Radiation Monitor CMS-RIS-27E or CMS-RIS-27F reading GT 70 R/hr Basis: Four high range area radiation detectors (CMS-RE-27A, B, E and F) are installed in the drywell. RE-27 A and -27B are located in the bioshield wall at elevations 522' and 525', azimuth 60° and 297°, respectively.
CMS-RE-27E and -27F are located inside containment at elevation 515', azimuth 290° and 51.5°, respectively.
The companion containment radiation monitors (CMS-RIS-27A, B, E and F) are located on RAD Boards 22 and 23 in the Main Control Room. (ref. 1) The threshold value was calculated assuming the instantaneous release and dispersal of the reactor coolant noble gas and iodine inventory associated with normal operating concentrations (i.e., within Technical Specifications) into the drywell atmosphere.
Evaluation of detector location, geometry and anticipated response suggests CMS-RIS-27E or F will provide the desired response to a given radiation source in the drywell and are, therefore, identified as the preferred monitors for evaluating this RCS Loss threshold. (ref. 2) The radiation monitor reading corresponds to an instantaneous release of all reactor coolant mass into the primary containment, assuming that reactor coolant activity equals Technical Specification allowable limits. This value is lower than that specified for Fuel Clad Barrier Loss threshold D.1 since it indicates a loss of the RCS Barrier only. There is no Potential Loss threshold associated with primary containment radiation.
CGS Basis Reference(s):
- 1. TM-2117 TSG -Core Thermal Engineer, Attachment 4.2 2. Calculation NE-02-94-57
- 3. NEI 99-01 Primary Containment Radiation RCS Loss 4.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 170 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
D. PC Radiation I RCS Activity Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 171 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
E. PC Integrity or Bypass Degradation Threat: Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 172 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
E. PC Integrity or Bypass Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 173 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
F. Emergency Director Judgment Degradation Threat: Loss Threshold:
Any condition in the opinion of the Emergency Director that indicates loss of the RCS barrier Basis: The Emergency Director judgment threshold addresses any other factors relevant to determining if the RCS barrier is lost. Such a determination should include imminent barrier degradation, barrier monitoring capability and dominant accident sequences.
- Imminent barrier degradation exists if the degradation will likely occur within two hours based on a projection of current safety system performance.
The term "imminent" refers to the recognition of the inability to reach safety acceptance criteria before completion of all checks.
- Barrier monitoring capability is decreased if there is a loss or lack of reliable indicators.
This assessment should include instrumentation operability concerns, readings from portable instrumentation and consideration of offsite monitoring results.
- Dominant accident sequences lead t o degradation of all fission product barriers and likely entry to the EOPs. The Emergency Director should be mindful of the Loss of AC power (Station Blackout) and A TWS EALs to assure timely emergency classification declarations.
This threshold addresses any other factors that may be used by the Emergency Director in determining whether the RCS Barrier is lost. CGS Basis Reference(s):
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 17 4 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Reactor Coolant System Category:
F. Emergency Director Judgment Degradation Threat: Potential Loss Threshold:
Any condition in the opinion of the Emergency Director that indicates potential loss of the RCS barrier Basis: The Emergency Director judgment threshold addresses any other factors relevant to determining if the RCS barrier is potentially lost. Such a determination should include imminent barrier degradation, barrier monitoring capability and dominant accident sequences.
- Imminent barrier degradation exists if the degradation will likely occur within two hours based on a projection of current safety system performance. The term "imminent" refers to the inability to reach final safety acceptance criteria before completing all checks.
- Barrier monitoring capability is decreased if there is a loss or lack of reliable indicators.
This assessment should include instrumentation operability concerns, readings from portable instrumentation and consideration of offsite monitoring results.
- Dominant accident sequences lead to degradation of all fission product barriers and likely entry to the EOPs. The Emergency Director should be mindful of the Loss of AC power (Station Blackout) and A TWS EALs to assure timely emergency classification declarations.
This threshold addresses any other factors that may be used by the Emergency Director in determining whether the RCS Barrier is potentially lost. The Emergency Director should also consider whether or not to declare the barrier potentially lost in the event that barrier status cannot be monitored.
CGS Basis Reference(s):
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 175 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
A. RPV Water Level Degradation Threat: Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY -TECHNICAL BASES Page: 176 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
A. RPV Water Level Degradation Threat: Potential Loss Threshold:
I SAG entry required Basis: EOP flowcharts provide instructions to assure adequate core cooling by restoring and maintaining RPV water level above prescribed limits, operate sufficient RPV injection sources to assure adequate core cooling, and assess the possibility of core damage when RPV level cannot be determined.
The Fuel Clad Loss threshold conditions are the EOP flowchart conditions that signal a loss of adequate core cooling and a requirement to exit all EOPs and enter the SAGs (ref. 1-6). This threshold is also a Loss of the RCS barrier (RCS Loss A) and a Loss of the Fuel Clad barrier (FC Loss A), and therefore represents a Loss of two barriers and a Potential Loss of a third, which requires a General Emergency classification.
The Potential Loss threshold is identical to the Fuel Clad Loss RPV Water Level threshold.
The Potential Loss requirement for SAG entry indicates adequate core cooling cannot be restored and maintained and that core damage is possible.
BWR EPGs/SAGs specify the conditions that require SAG entry. When SAG entry is required, the EPGs are exited and SAGs are entered. Entry into SAGs is a logical escalation in response to the inability to restore and maintain adequate core cooling. PRA studies indicate that the condition of this Potential Loss threshold could be a core melt sequence which, if not corrected, could lead to RPV failure and increased potential for primary containment failure. In conjunction with the RPV water level Loss thresholds in the Fuel Clad and RCS barrier columns, this threshold results in the declaration of a General Emergency.
CGS Basis Reference(s):
- 1. PPM 5.1.1 RPV Control 2. PPM 5.1.2 RPV Control -ATWS 3. Calculation NE-02-03-06 Attachment 10 RPV Variables
- 4. PPM 5.0.10 Flowchart Training Manual 5. PPM 5.1.4 RPV Flooding 6. PPM 5.1.6 RPV Flooding -ATWS 7. NEI 99-01 RPV Water Level PC Potential Loss 2.A Number: 13.1.1A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
B. RCS Leak Rate Degradation Threat: Loss Threshold:
UNISOLABLE primary system leakage that results in exceeding EITHER: Basis: RB area maximum safe operating temperature (PPM 5.3.1 Table 23) OR RB area maximum safe operating radiation (PPM 5.3.1 Table 24) Major Rev: Draft Minor Rev: N/A Page: 177 of 203 The presence of elevated general area temperatures or radiation levels in the Reactor Building (RB) may be indicative of unisolable primary system leakage outside the primary containment.
The maximum safe operating values define this Containment barrier threshold because they are indicative of problems in the secondary containment that are spreading and pose a threat to achieving a safe plant shutdown.
This threshold addresses problematic discharges outside primary containment that may not originate from a high-energy line break. The locations into which the primary system discharge is of concern correspond to the areas addressed in PPM 5.3.1 Tables 23 and 24 (ref. 1 ). RB maximum safe operating temperatures are conservatively defined by the qualification temperature of safety related equipment in the area. The equipment qualification program has proven that safety related equipment will perform satisfactorily to at least this temperature.
In an area with multiple components and different qualification temperatures, the maximum safe operating temperature assigned to that area is generally the lowest of the individual temperatures. (ref. 2) The maximum safe operating radiation value is defined to be 10,000 mR/hr in areas other than the refueling floor. This is the maximum indication on all but the high level instruments.
This value is high enough to be indicative of substantial and immediate problems yet low enough to allow time for shutdown or isolation of a leak without exceeding the total integrated dose allowable for even the most sensitive safety related equipment.
No area radiation levels are defined for the refueling floor because no primary systems are routed there. (ref. 2) In general, multiple indications should be used to determine if a primary system is discharging outside primary containment.
For example, a high area radiation condition does not necessarily indicate that a primary system is discharging into the secondary containment since this may be caused by radiation shine from nearby steam lines or the movement of radioactive materials.
Conversely, a high area radiation condition in conjunction with other indications (e.g. room flooding, high area temperatures, reports of steam in the secondary containment, an unexpected rise in feedwater flowrate, or unexpected main turbine control valve closure) may indicate that a primary system is discharging into the secondary containment.
The Max Safe Operating Temperature and the Max Safe Operating Radiation Level are each the highest value of these parameters at which neither: (1) equipment necessary for the safe shutdown of the plant will fail, nor (2) personnel access necessary for the safe shutdown of the plant will be Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 178 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases precluded.
EOPs utilize these temperatures and radiation levels to establish conditions under which RPV depressurization is required.
The temperatures and radiation levels should be confirmed to be caused by RCS leakage from a primary system. A primary system is defined to be the pipes, valves, and other equipment which connect directly to the RPV such that a reduction in RPV pressure will effect a decrease in the steam or water being discharged through an unisolated break in the system. In combination with the RCS Potential Loss RCS Leak Rate threshold this threshold would result in a Site Area Emergency.
There is no Potential Loss threshold associated with primary containment isolation failure. CGS Basis Reference(s):
- 1. PPM 5.3.1 Secondary Containment Control 2. PPM 5.0.10 Flowchart Training Manual 3. NEI 99-01 RCS Leak Rate PC Loss 3.C Number: 13.1.1A Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 179 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
B. RCS Leak Rate Degradation Threat: Potential Loss Threshold:
None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 180 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
C. PC Conditions Degradation Threat: Loss Threshold:
UNPLANNED rapid drop in PC pressure following PC pressure rise Basis: Rapid UNPLANNED loss of primary containment pressure (i.e., not attributable to containment spray or condensation effects) following an initial pressure increase indicates a loss of primary containment integrity.
This threshold relies on operator recognition of an unexpected response for the condition and therefore a specific value is not assigned.
The unexpected (UNPLANNED) response is important because it is the indicator for a containment bypass condition.
CGS Basis Reference(s):
- 1. NEI 99-01 Primary Containment Conditions PC Loss 1.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 181 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
C. PC Conditions Degradation Threat: Loss Threshold:
PC pressure response not consistent with LOCA conditions Basis: This indicator is considered to be a loss of both the RCS and PC barriers.
Normal LOCA conditions are drywell pressure rising with wetwell pressure following.
Primary containment or drywell pressure responses not consistent with LOCA conditions indicate a loss of the primary containment barrier. This may be noticed as a decrease in drywell pressure when no operator action (e.g., starting drywell cooling fans) has been taken. It would also include a failure of the drywell pressure to increase as expected during a LOCA. Also, a loss of suppression function in conjunction with a LOCA would indicate a loss of the primary containment barrier. Exceeding Pressure Suppression Pressure (PSP) is an indication of loss of pressure suppression function.
Primary containment pressure should increase as a result of mass and energy release into the primary containment from a LOCA. Thus, primary containment pressure not increasing under these conditions indicates a loss of primary containment integrity. This threshold relies on operator recognition of an unexpected response for the condition and therefore a specific value is not assigned.
The unexpected (UNPLANNED) response is important because it is the indicator for a containment bypass condition.
CGS Basis Reference(s):
- 1. FSAR Section 6.2.1.1.3.3
- 2. FSAR Figure 6.2-3 3. FSAR Table 6.2-5 4. FSAR Table 6.2-1 5. NEI 99-01 Primary Containment Conditions PC Loss 1.B Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 182 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
C. PC Conditions Degradation Threat: Potential Loss Threshold:
I PC pressure GT 45 psig Basis: If this threshold is exceeded, a challenge to the primary containment structure has occurred because assumptions used in the accident analysis are no longer valid and an unanalyzed condition exists (ref. 1, 2). This constitutes a Potential Loss of the Containment barrier even if a containment breach has not occurred.
The threshold pressure is the primary containment internal design pressure.
Structural acceptance testing demonstrates the capability of the primary containment to resist pressures greater than the internal design pressure.
A pressure of this magnitude is greater than those expected to result from any design basis accident and, thus, represent a Potential Loss of the Containment barrier. CGS Basis Reference(s):
- 1. FSAR Table 6.2-1 2. FSAR Section 6.2 3. NEI 99-01 Primary Containment Conditions PC Potential Loss 1.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 183 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
C. PC Conditions Degradation Threat: Potential Loss Threshold:
Explosive mixture exists inside PC (H2 GE 6% and 02 GE 5%) Basis: Explosive (deflagration) mixtures in the primary containment are assumed to be elevated concentrations of hydrogen and oxygen. BWR industry evaluation of hydrogen generation for development of EOPs/SAGs indicates that any hydrogen concentration above minimum detectable is not to be expected within the short term. Post-LOCA hydrogen generation primarily caused by radiolysis is a slowly evolving, long-term condition.
Hydrogen concentrations that rapidly develop are most likely caused by metal-water reaction.
A metal-water reaction is indicative of an accident more severe than accidents considered in the plant design basis and would be indicative, therefore, of a potential threat to primary containment integrity.
Hydrogen concentration of approximately 6% is considered the global deflagration concentration limit (ref. 1 ). Except for brief periods during plant startup and shutdown, oxygen concentration in the primary containment is maintained at insignificant levels by nitrogen inerting.
The specified values for this Potential Loss threshold are the minimum global deflagration concentration limits (6% hydrogen and 5% oxygen, ref. 2) and readily recognizable because 6% hydrogen is well above the EOP flowchart entry condition (ref. 3). The minimum global deflagration hydrogen/oxygen concentrations (6%/5%, respectively) require intentional primary containment venting, which is defined to be a Loss of Containment (PC Integrity or Bypass). If hydrogen concentration reaches or exceeds the lower flammability limit, as defined in plant EOPs, in an oxygen rich environment, a potentially explosive mixture exists. If the combustible mixture ignites inside the primary containment, loss of the Containment barrier could occur. CGS Basis Reference(s):
- 1. BWROG EPG/SAG Revision 2, Sections PC/G 2. PPM 5.7.1 RPVand Primary Containment Flooding SAG, Table 19 3. PPM 5.2.1 Primary Containment Control 4. FSAR Section 7.5.1.5.4
- 5. PPM 5.0.10 Flowchart Training Manual 6. PPM 4.814.J1 814.J1 Annunciator Panel Alarms, 2-2 7. PPM 4.814.J2 814.J2 Annunciator Panel Alarms , 2-2 8. NEI 99-01 Primary Containment Conditions PC Potential Loss 1.B Number: 13.1.1A j Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 184 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
C. PC Conditions Degradation Threat: Potential Loss Threshold:
WW temperature and RPV pressure cannot be maintained below the HCTL Basis: The HCTL is given in EOP flowchart Figure C (ref. 1 ). This is the only instance in which the threshold could be met. Heat Capacity Temperature Limit (HCTL) is the highest Wetwell temperature from which emergency RPV depressurization will not exceed:
- Capability of the Wetwell, and equipment within the Wetwell which may be required to operate, when the RPV is pressurized
- Pressure Limit (PCPL), while the rate of energy transfer from the RPV to the Containment is GT the capacity of the Containment vent The HCTL is a function of RPV pressure, suppression pool temperature and suppression pool water level. It is utilized to preclude failure of the containment and equipment in the containment necessary for the safe shutdown of the plant and therefore, the inability to maintain plant parameters below the limit constitutes a potential loss of containment.
CGS Basis Reference(s):
- 1. PPM 5.2.1 Primary Containment Control 2. NEI 99-01 Primary Containment Conditions PC Potential Loss 1.C Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 185 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
D. PC Radiation I RCS Activity Degradation Threat: Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 186 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
D. PC Radiation I RCS Activity Degradation Threat: Potential Loss Threshold:
Containment Radiation Monitor CMS-RIS-27E or CMS-RIS-27F reading GT 14,000 R/hr Basis: Four high range area radiation detectors (CMS-RE-27 A, B, E and F) are installed in the drywell. CMS-RE-27 A and -27B are located in the bioshield wall at elevations 522' and 525', azimuth 60° and 297°, respectively.
CMS-RE-27E and -27F are located inside containment at elevation 515', azimuth 290° and 51.5°, respectively.
The companion containment radiation monitors (CMS-RIS-27 A, B, E and F) are located on RAD Boards 22 and 23 i n the Main Control Room. (ref. 1) The threshold value was calculated assuming the instantaneous release and dispersal of the reactor coolant noble gas and iodine inventory associated with 20% fuel clad damage into the drywall atmosphere.
Evaluation of detector location, geometry and anticipated response suggests CMS-RIS-27E or F will provide the desired response to a given radiation source in the drywell and are, therefore, identified as the preferred monitors for evaluating this Containment barrier Potential Loss threshold. (ref. 2) The radiation monitor reading corresponds to an instantaneous release of all reactor coolant mass into the primary containment, assuming that 20% of the fuel cladding has failed. This level of fuel clad failure is well above that used to determine the analogous Fuel Clad Barrier Loss and RCS Barrier Loss thresholds.
NUREG-1228, Source Estimations During Incident Response to Severe Nuclear Power Plant Accidents, indicates the fuel clad failure must be greater than approximately 20% in order for there to be a major release of radioactivity requiring offsite protective actions. For this condition to exist , there must already have been a loss of the RCS Barrier and the Fuel Clad Barrier. It is therefore prudent to treat this condition as a potential loss of containment which would then escalate the emergency classification level to a General Emergency.
CGS Basis Reference(s):
- 1. TM-2117 TSG -Core Thermal Engineer , Attachment 4.2 2. Calculation NE-02-94-57
- 2. NEI 99-01 Primary Containment Radiation Fuel Clad Potential Loss 1.D Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 187 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
E. PC Integrity or Bypass Degradation Threat: Loss Threshold:
UNISOLABLE direct downstream pathway to the environment exists after PC isolation signal Basis: This threshold addresses failure of open isolation devices which should close upon receipt of a manual or automatic containment isolation signal resulting in a significant radiological release pathway directly to the environment.
The concern is the unisolable open pathway to the environment.
A failure of the ability to isolate any one line indicates a breach of containment integrity.
Leakage into a closed system is to be considered only if the closed system is breached and thereby creates a significant pathway to the environment.
Examples include uniso l able main steam line or RCIC steam line breaks, unisolable RWCU system breaks, and unisolable PC vent paths. PPM 5.2.1, Primary Containment Control, may specify primary containment venting and intentional bypassing of the containment isolation valve logic, even if offsite radioactivity release rate limits are exceeded (ref. 1 ). Under these conditions w i th a valid conta i nment isolation signal, the Containment barrier should be considered lost. The use of the modifier "direct" in defining the release path discriminates against release paths through interfacing liquid systems or minor release pathways, such as instrument lines, not protected by the Primary Containment Isolation System (PCIS). The existence of a filter is not considered in the threshold assessment.
Filters do not remove fission product noble gases. In addition, a filter could become ineffective due to iodine and/or particulate loading beyond design limits (i.e., retention ability has been exceeded) or water saturation from steam/high humidity in the release stream. Following the leakage of RCS mass into primary containment and a rise in primary containment pressure , there may be minor radiological releases associated with allowable primary containment leakage through various penetrations or system components.
Minor releases may also occur if a primary containment isolation valve(s) fails to close but the primary containment atmosphere escapes to an enclosed system. These releases do not constitute a loss or potential loss of primary containment but should be evaluated using the Recognition Category R ICs. CGS Basis Reference(s):
- 1. PPM 5.2.1 Primary Containment Control 2. NEI 99-01 Primary Containment Isolation Failure PC Loss 3.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 188 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
E. PC Integrity or Bypass Degradation Threat: Loss Threshold:
[ Intentional PC venting per EOPs Basis: EOP flowcharts (PPM 5.2.1, Primary Containment Control) may specify primary containment venting and intentional bypassing of the containment isolation valve logic, even if offsite radioactivity release rate limits are exceeded (ref. 1 ). The threshold is met when the operator begins venting the primary containment in accordance with EOP Support Procedures (PPM 5.5.14 or PPM 5.5.15) or VENT, not when actions are taken to bypass interlocks prior to opening the vent valves (ref. 2, 3, 4). Purge and vent actions specified in PPM 5.2.1 to control primary containment pressure below the drywall high pressure scram setpoint or to lower hydrogen concentration does not meet this threshold because such action is only permitted if offsite radioactivity release rates will remain below the ODCM RFO limits (ref. 1 ). EOPs may direct primary containment isolation valve logic(s) to be intentionally bypassed, even if offsite radioactivity release rate limits will be exceeded.
Under these conditions with a valid primary containment isolation signal, the containment should also be considered lost if primary containment venting is actually performed.
Intentional venting of primary containment for primary containment pressure control to the secondary containment and/or the environment is a Loss of the Containment.
Venting for primary containment pressure control when not in an accident situation (e.g., to control pressure below the drywall high pressure scram setpoint) does not meet the threshold condition.
CGS Basis Reference(s):
- 1. PPM 5.2.1 Primary Containment Control 2. PPM 5.5.14 Emergency Wetwell Venting 3. PPM 5.5.15 Emergency Drywall Venting 4. ABN-CONT-VENT
- 5. NEI 99-01 Primary Containment Isolation Failure PC Loss 3.B Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 189 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
E. PC Integrity or Bypass Degradation Threat: Potential Loss Threshold:
I None Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
Degradation Threat: F. Emergency Director Judgment Loss Threshold:
Major Rev: Draft Minor Rev: N/A Page: 190 of 203 Any condition in the opinion of the Emergency Director that indicates loss of the Containment barrier Basis: The Emergency Director judgment threshold addresses any other factors relevant to determining if the Containment barrier is lost. Such a determination should include imminent barrier degradation, barrier monitoring capability and dominant accident sequences.
- Imminent barrier degradation exists if the degradation will likely occur within two hours based on a projection of current safety system performance. The term "imminent" refers to recognition of the inability to reach safety acceptance criteria before completion of all checks.
- Barrier monitoring capability is decreased if there is a loss or lack of reliable indicators.
This assessment should include instrumentation operability concerns, readings from portable instrumentation and consideration of offsite monitoring results.
- Dominant accident sequences lead to degradation of all fission product barriers and likely entry to the EOPs. The Emergency Director should be mindful of the Loss of AC power (Station Blackout) and ATWS EALs to assure timely emergency classificat i on declarations. This threshold addresses any other factors that may be used by the Emergency Director in determining whether the Containment Barrier is lost. CGS Basis Reference(s):
- 1. NEI 99-01 Emergency Director Judgment PC Loss 6.A Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 191 of 203 ATTACHMENT 7.2: Fission Product Barrier Matrix and Bases Barrier: Containment Category:
F. Emergency Director Judgment Degradation Threat: Potential Loss Threshold:
Any condition in the opinion of the Emergency Director that indicates potential loss of the Containment barrier Basis: The Emergency Director judgment threshold addresses any other factors relevant to determining if the Containment barrier is potentially lost. Such a determination should include imminent barrier degradation, barrier monitoring capability and dominant accident sequences.
- Imminent barrier degradation exists if the degradation will likely occur within two hours based on a projection of current safety system performance. The term "imminent" refers to recognition of the inability to reach safety acceptance criteria before completion of all checks.
- Barrier monitoring capability is decreased if there is a loss or lack of reliable indicators.
This assessment should include instrumentation operability concerns, readings from portable instrumentation and consideration of offsite monitoring results.
- Dominant accident sequences lead to degradation of all fission product barriers and likely entry to the EOPs. The Emergency Director should be mindful of the Loss of AC power (Station Blackout) and ATWS EALs to assure timely emergency classification declarations.
This threshold addresses any other factors that may be used by the Emergency Director in determining whether the Containment Barrier is lost. CGS Basis Reference(s):
- 1. NEI 99-01 Emergency Director Judgment PC Loss 6.A Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES * * * * *
- ATTACHMENT 7.3: NOTES AND TABLES Table 1 Sumps/Pool
- Any valid Hi-Hi level alarm on R-1 through R-5 sumps
- FDR GE 10 GPM
- Wetwell level rise
- Observation of UNISOLABLE RCS leakage Table 2 AC Power Sources Off site Startup Transformer TR-S Backup Transformer TR-B Backfeed 500 KV power through Main Transformers (if already aligned in modes 4, 5, def only) On site DG1 DG2 Main Generator via TR-N 1 /N2 Major Rev: Draft Minor Rev: N/A Page: 192 of 203 Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 193 of 203 ATTACHMENT 7.3: NOTES AND TABLES Table 3 Effluent Monitor Classification Thresholds Release Point Monitor General SAE Alert UE PRM-RE-1B (I) ------------3.00E+03 cps I/) Reactor Building Exhaust ::;:, PRM-RE-1C (H) 2.00E+04 cps 2.00E+03 cps 4.00E+02 cps ----0 Cl) I/) Turbine Building Exhaust TEA-RIS-13 8.35E-02 µCi/cc 8.35E-03 µCi/cc 8.35E-04 µCi/cc 4.22E-05 µCi/cc cu C> Radwaste Building WEA-RIS-14 3.45E-01 µCi/cc 3.45E-02 µCi/cc 3.45E-03 µC i/cc 3.98E-04 µC i/cc Exhaust Radwaste Effluent FDR-RIS-606 ------------2 X HI-HI alarm :E TSW Effluent TSW-RIS-5 3.00E-05 µCi/cc ::;:, ------------tr :i Service Water Process A SW-RIS-604 1.00E+02 cps -----------Service Water Process B SW-RIS-605 1.00E+02 cps Table 4 Communication Methods System On site ORO NRC Plant Public Address (PA) System x Plant Telephone System x x Plant Radio System Operations and x Security Channels Offsite calling capability from the Control x x Room via direct telephone Long distance calling capability on the x x commercial phone system Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.3: NOTES AND TABLES Table 5 Safe Shutdown Areas
- Vital portions of the Rad Waste/Control Building:
467' elevation vital island 487' elevation cable spreading room Main Control Room and vertical cable chase 525' elevation HVAC area
- Reactor Building
- Vital portions of the Turbine Building DEH pressure switches RPS switches on turbine throttle valves Main steam line radiation monitors Turbine Building ventilation radiation monitors Main steam line piping up to MS-V-146 and the first stop valves
- Standby Service Water Pump Houses
- Diesel Generator Building Table 7 RCS Heat-up Duration Thresholds Page: 194 of 203 RCS Status CONTAINMENT CLOSURE Heat-up Duration Status Intact N/A 60 min.* established 20 min.* Not intact not established 0 min.
- If an RCS heat removal system is in operation within this time frame and RCS temperature is being reduced, the EAL i s not applicable.
Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.3: NOTES AND TABLES Table 8 Hazardous Events
- Seismic event
- Internal or external FLOODING event
- Tornado strike
- FIRE
- EXPLOSION
- Volcanic ash fallout
- Other events with similar hazard characteristics as determined by the Shift Manager Table 9 Safe Operation
& Shutdown Areas Major Rev: Draft Minor Rev: N/A Page: 195 of 203 Room/Area Mode Applicability RW 467' Radwaste Control Room (RHR flush to RW tanks) 3 RW 467' Vital Island (RHR-V-9 disconnect) 3 RB 422' B RHR Pump Rm (local pump temperatures) 3 RB 454' B RHR Pump Rm (operate RHR-V-85B) 3 Table 10 Safety System Parameters
- Reactor power
- RPV level
- RPV pressure
- Primary containment pressure
- Wetwell level
- Wetwell temperature Number: 13.1.1A I Use Category:
REFERENCE Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES ATTACHMENT 7.3: NOTES AND TABLES Table 11 Significant Transients
- Reactor scram
- Runback GT 25% thermal reactor power
- Electrical load rejection GT 25% full electrical load
- ECCS injection
- Thermal power oscillations GT 10% Major Rev: Draft Minor Rev: N/A Page: 196 of 203 Number: 13.1.1A Major Rev: Draft Minor Rev: N/ A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 197 of 203 ATTACHMENT 7.3: NOTES AND TABLES Table 12 Notes Note 1: The Emergency Director should declare the event promptly upon determining that time limit has been exceeded, or will likely be exceeded Note 2: If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded the specified time limit Note 3: If the effluent flow past an effluent monitor is known to have stopped, indicating that the release path is isolated, the effluent monitor reading is no longer VALID for classification purposes Note 4: The pre-calculated effluent monitor values presented in EALs RA 1.1, RS 1.1 and RG1 .1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available Note 5: If the equipment in the listed room or area was already inoperable or out-of-service before the event occurred, then no emergency classification is warranted Note 6: If CONTAINMENT CLOSURE is re-established prior to exceeding the 30-minute time limit, declaration of a General Emergency is not required Note 7: This EAL does not apply to routine traffic impediments such as fog, snow , ice, or vehicle breakdowns or accidents Note 8: A manual scram action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core , and does not include manually driving in control rods or implementation of boron injection strategies Note 9: If the affected SAFETY SYSTEM train was already inoperable or out of service before the hazardous event occurred, then emergency classification is not warranted.
Note 10: If the hazardous event only resulted in VISIBLE DAMAGE, with no indications of degraded performance to at least one train of a SAFETY SYSTEM, then this emergency classification is not warranted.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 198 of 203 ATTACHMENT 7.3: NOTES AND TABLES Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY -TECHNICAL BASES Page: 199 of 203 ATTACHMENT 7.4: Safe Operation
& Shutdown Areas Table 9 Bases Background NEI 99-01 Revision 6 ICs AA3 and HAS prescribe declaration of an Alert based on impeded access to rooms or areas (due to either area radiation levels or hazardous gas concentrations) where equipment necessary for normal plant operations, cooldown or shutdown is located. These areas are intended to be plant operating mode dependent.
Specifically the Developers Notes For AA3 and HAS states: The "site-specific list of plant rooms or areas with entry-related mode applicability identified" should specify those rooms or areas that contain equipment which require a manual/local action as specified in operating procedures used for normal plant operation, coo/down and shutdown.
Do not include rooms or areas in which actions of a contingent or emergency nature would be performed (e.g., an action to address an off-normal or emergency condition such as emergency repairs, corrective measures or emergency operations).
In addition , the list should specify the plant mode(s) during which entry would be required for each room or area. The list should not include rooms or areas for which entry is required solely to perform actions of an administrative or record keeping nature (e.g., normal rounds or routine inspections).
Further, as specified in IC HAS: The list need not include the Control Room if adequate engineered safety/design features are in place to preclude a Control Room evacuation due to the release of a hazardous gas. Such features may include, but are not limited to , capability to draw air from multiple air intakes at different and separate locations, inner and outer atmospheric boundaries , or the capability to acquire and maintain positive pressure within the Control Room envelope.
Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 200 of 203 ATTACHMENT 7.4: Safe Operation
& Shutdown Areas Table 9 Bases Table 9 Bases The following table lists the locations into which an operator may be dispatched in order to safely shut down the reactor and reach cold shutdown conditions in accordance with plant procedures.
The reason for these in-plant actions has been evaluated and a determination made whether or not the actions, if not performed, would prevent achieving cold shutdown.
The minimum set of in-plant actions, associated locations, and operating modes to shut down and cool down the reactor are identified as "yes". These comprise the rooms/areas to be included in EAL Table 9. Building Elevation Room Modes Reason If not performed, prevents cooldown/shutdown?
TG 441 Booster pump area 1,3,4 Condensate Booster No Pump S/D per SOP-COND-SHUTDOWN RFT Area 1,3 RFT S/D per SOP-RFT-No SHUTDOWN IR-9 Area 1 Verify Desuperheater No pressure per SOP-MT-SHUTDOWN Mech Vacuum 3 Mech Vacuum Pmp Start No, can break vacuum and cool PmpRm per SOP-AR-down with SRVs SHUTDOWN Mech Vacuum 3 Mech Vacuum Pmp Stop No PmpRm per SOP-AR-ST ART OG Preheater Rm 3 OG System S/D per No SOP-CG-SHUTDOWN Gland Exh 3 OG System S/D per No Condenser Area SOP-CG-SHUTDOWN H2 valve station 1,3,4 H2 makeup to Mn No Generator per SOP-H2/C02-0PS 501 MT Turning Gear 1 Place MT on Turning No Area Gear per SOP-MT-START CW Pump n/a CW PmpArea 1 CW Pmp S/D per SOP-No House CW-SHUTDOWN Towers and CW 1 Monitor water level per No Basin SOP-CW-SHUTDOWN Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 201 of 203 ATTACHMENT 7.4: Safe Operation
& Shutdown Areas Table 9 Bases Building Elevation Room Modes Reason If not performed, prevents cooldown/shutdown?
RW 467 Radwaste Control 1,3 Remove CFDs from No Room service per SOP-CFO-SHUTDOWN 3 Align RW tanks to Yes, RWCR operator will need receive RH R water per to align Radwaste tanks to SOP-RHR-SDC accept RHR SOC flush water. Vital Island 3 Close disc for RHR-V-9 Yes, Disconnect for RHR-V-9 is per SOP-RHR-SDC normally left open during power operations.
525 Communication 4 Check Oscillograph per No Rm PPM 3.2.1 TMU n/a TMU Pump Area 1 TMU Pmp Shutdown per No SOP-TMU-SHUTDOWN Switchyard n/a 500KV MODs 1 Open MODs per SOP-No MT-SHUTDOWN Rx Bldg 422 B RHR Pump Rm 3 RHR Pump local Yes, local readings of RHR temperature reading per pump taken prior to and during SOP-RHR-SDC flush to ensure minimal delta-T is established 441 Railroad Bay 1 CIA N2 Bottle Change No, Many installed bottles, out per SOP-CIA-OPS infrequent task 454 B RHR Pump Rm 3 Cycle RHR-V-85B for Yes, valve must be cycled to flush per SOP-RHR-SDC perform RHR SOC line flush 501 HCU Area 1 HCU Charging per SOP-No, infrequent task CRD-HCU 548 B RHR Valve Rm 3 Vent RHR system post No, vent not necessary to enter flush per SOP-RHR-SDC soc 572 B RHRHXRm 3 Vent RHR system post No, vent not necessary to enter flush per SOP-RHR-SDC soc Number: 13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 202 of 203 ATTACHMENT 7.4: Safe Operation
& Shutdown Areas Table 9 Bases Table 9 Results Table 9 Safe Operation
& Shutdown Areas Room/Area Mode Applicability RW 467' Radwaste Control Room (RHR flush to RW tanks) 3 RW 467' Vital Island (RHR-V-9 disconnect) 3 RB 422' B RHR Pump Rm (local pump temperatures) 3 RB 454' B RHR Pump Rm (operate RHR-V-858) 3 Plant Operating Procedures Reviewed 1. PPM 3.2.1 NORMAL PLANT SHUTDOWN 13. SOP-MT-SHUTDOWN 2. SOP-FWH-SHUTDOWN
- 14. SOP-CW-OPS
- 3. SOP-MSR-OPS
- 15. SOP-OG-SHUTDOWN
- 4. SOP-CW-SHUTDOWN
- 16. SOP-AR-START
- 5. SOP-COND-SHUTDOWN
- 17. SOP-MT-ST ART 6. SOP-CFO-SHUTDOWN
- 18. OSP-RHR-M102
- 7. SOP-TMU-SHUTDOWN
- 19. SOP-RHR-SDC 8. SOP-AS-START
- 20. SOP-RCIC-SHUTDOWN
- 9. SOP-SS-OPS
- 10. SOP-RFT-SHUTDOWN 11 . SOP-RFT-OPS
- 12. SOP-AR-SHUTDOWN
- 21. SOP-SS-SHUTDOWN
- 22. SOP-H2/C02-0PS
- 23. SOP-CIA-OPS
- 24. SOP-CRD-HCU Number: *'13.1.1A I Use Category:
REFERENCE Major Rev: Draft Minor Rev: N/A Title: CLASSIFYING THE EMERGENCY
-TECHNICAL BASES Page: 203 of 203 ATTACHMENT 7.5: Columbia Generating Station Emergency Classification Chart Distribution NOTE: The Emergency Classification Chart is prov i ded in a separate , controlled distribution to the following locations:
Location Control Room (MCR) Control Room Simulator Technical Support Center (TSC) Alternate TSC Emergency Operations Facility (EOF) Alternate EOF Joint Information Center (JIC) Remote Shutdown Room Simulator Remote SID Room No. Of Copies 2 half size 2 half size 2 half size, 1 full size 2 half size, 1 full size 2 half size, 2 full size 2 half size 1 half size 1 half size 1 half size NOTE: Information Only charts should be provided to the following locations: Benton County EOC Franklin County EOC Washington State EOC Grant County EOC Adams County EOC Yakima County EOC 1 half size 1 half size 1 half size 1 half size 1 half size 1 half size