ML20210G315

Change Notice 1 to Rev 3 to Instruction QI-029, Reinsp of Large Bore Pipes Supports - Non-Rigid

ML20210G315
Person / Time
Site:	Comanche Peak
Issue date:	11/10/1986
From:	Patterson A, Talbian J, Zill R EVALUATION RESEARCH CORP.
To:
Shared Package
ML20210F162	List: ML20210F268 ML20210F328 ML20210F463 ML20210G087 ML20210G139 ML20210G203 ML20210G255 ML20210G315 ML20210G361 ML20210G445 ML20210G544 ML20210G583 ML20210G621 ML20210G645 ML20210G690 ML20210G712 ML20210G875 ML20210G892 ML20210G939 ML20210G960 ML20210G983 ML20210H012 ML20210H067 ML20210H070 ML20210H182 ML20210H239 ML20210H301 ML20210H354 ML20210H393 ML20210H432 ML20210H457 ML20210H484 ML20210H523 ML20210H584 ML20210H604 ML20210H636 ML20210H662 ML20210H703 ML20210H754 ML20210H775 ML20210H787 ML20210H798 ML20210H822 ML20210K794 TXX-6237, Forwards Revs to Comanche Peak Steam Electric Station Manuals
References
QI-029-01, QI-29-1, NUDOCS 8702110258
Download: ML20210G315 (3)

Text

4 Pags 1 of 3

, I EVALUATION RESEARCH CORPORATION UNCONTROLLED COPY COMANCHE PEAK RESPONSE TEAM QUALITY INSTRUCTION FOR ISSUE-SPECIFIC ACTION PLAN VII.c CHANGE NOTICE: 001 INSTRUCTION NO.: QI-029 REVISION: 3 l

ISSUE DATE: 11/10/86 O

REINSPECTION OF LARGE BORE PIPES SUPPORTS - NON-RIGID The QI identified above is hereby changed as shown on the attached page of this notice.

i i

Prepared by: d

.jOi Date: 4 OcVember 86 Approved by: MMdMMM

//[4/86 Date:

IssueCoorpndtor l

Date:

/I-d/"((

Approved by:

On-Site QA Re g entative

~

Approved by:

Y Date:

// 6 8d Q

Review Team' Leader m2anan8Mihs m

J-Changs Notice 001 5-QI-029 Rev. 3 O-1.

Revise Note 31 to read as follows:

"The inspector should record inspection cool code shown on Atta,chment 6;4 for those tools used in the inspection. The tool codes should be recorded on Attachment 6.3. - Where tools have serial numbers or calibration due dates, these shall be recorded on

-.3.

The information_ is for possible future use and is not a requirement for these inspection."

4 2.

Replace Page 24 with the attached page.

O t

O 2

'1 Chance Notice: 001 v

QI-029 Rev. 3 Page 3 of 3 5.0

• NSTRUCTION (Cont'd) 3.9 Modified Component Support Catalog Items (Cont'd)

• Weld sizes are the minimum,'but need not be larger than the thickness of the collar.

B. ITT Grinnell Sway Struts (98)

For ITT Grinnell Sway Struts verify the following fillet weld sizes are met as a minimum:*

Strut Size A-C 1-3 4-6 7

8 Wald Size 3/16" 5/16" ~ 3/8" 5/8" 3/4" t.

• Weld sizes are the minimum, but need not be larger than the thickness of the collar.

C. Snubber Transition Kits (9C)

For ITT Grinnell and NPSI Snubber Transition Kits, verify the following fillet veld sizes are met as a minimum:*

Snubber Size 1/4 - 1/2

~

1 3

10

'35 100 Weld Size 3/16" 3/16" 3/16" 1/4" 3/8" 5/8"

• Weld sizes need not be larger than the thickness of the l

coupling.

D. NPSI Forward Snubber Brackets for sizes 1/4 through 10 (9D) i

1. Bracket Dimensions (1)

Verify C-C dimension of the forward bracket meets thw requirements of the following:

c".g I

b-fA LY

)

ig-i Er=; :aa 5t:e e

• tz. is-C' P*9.M*C1 g, g 8 7/18 1 1/8 1

9 13/18 15/8 3

11 13/18 2

10 14 1/18 2 t/8 24 l

. -.