ML11224A010

License Amendment Request, Technical Specification Change Regarding Steam Generator Tube Integrity

ML11224A010
Person / Time
Site:	Waterford
Issue date:	07/20/2011
From:	Kowalewski J Entergy Operations
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
W3F1-2011-0040
Download: ML11224A010 (33)

Text

9Entergy Operations, Inc.17265 River Road Killona, LA 70057-3093 En tergý Tel 504-739-6715 Fax 504-739-6698 jkowale@entergy.com Joseph A. Kowalewski Vice President, Operations Waterford 3 W3F1-2011-0 040 July 20, 2011 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555

SUBJECT:

License Amendment Request Technical Specification Change Regarding Steam Generator Tube Integrity Waterford Steam Electric Station, Unit 3 Docket No. 50-382 License No. NPF-38

Dear Sir or Madam:

Pursuant to 10 CFR 50.90, E ntergy Operations, Inc. (Entergy) hereby requests a license amendment to the Waterford Steam Electric Station, Unit 3 (Waterford

3) Technical Specifications (TS). The proposed amendment will modify TS 3/4.4.4, "Steam Generator (SG)Tube Integrity," TS 6.5.9, "Steam Generator (SG) Program," and TS 6.9.1.5, "Steam Generator Tube Inspection Report." Entergy will be replacing the two Waterford 3 steam generators (SGs) during the 1 8 th refueling outage which will commence in the fall of 2012. The existing Waterford 3 SG Program under TS 6.5.9 contains an alternate repair criterion f or SG tube inspections that is no longer applicable to the replacement SGs. Additionally, the replacement SGs will contain improved Alloy 690 thermally treated (TT) tubing material.

Therefore, the SG tubing inservice inspection frequencies may be extended beyond that currently allowed by the Waterford TSs. Entergy proposes to apply the guidance of Technical Specification Task Force (TSTF)-510, Revision 2 for this change. TSTF-510 is currently being proposed as a Cons olidated Line Item Improvement Process (CLIIP); however TSTF-510 has not been approved by the NRC at this time. Due to other proposed changes to the W aterford 3 TSs for the upcoming Replacement SG outage and the near term need to process these changes ahead of NRC approval of TSTF-510, Entergy is requesting adoption of these improvements as a plant specific change for Waterford 3 instead of a CLIIP change.A description of the proposed change is provided i n Attachment

1. A markup of the affected TS pages is contained in Attachment

2. Proposed changes to the TS Bases which are being controlled under the Waterford 3 TS Bases Control Program are provided in Attachment 3, for information only. A clean copy of the proposed TS pages is contained in Attachment 4.The proposed change has been evaluated in accordance w ith 10 CFR 50.91(a) (1) using criteria in 10 CFR 50.92(c) and it has been determined that the changes involve no significant hazards consideration.

W3F1 -2011-0040 Page 2 The proposed change involves no new commitments.

Entergy requests approval of the proposed amendment by August 1, 2012. Once approved, the amendment shall be implemented prior to the first SG tube inservice inspection for the replacement SGs.Please contact William J. Steelman at 504-739-6685 if there are any questions regarding this amendment request.I declare under penalty of perjury that the foregoing is true and correct. Executed on July 20, 2011.Sincerely, JA Attachments:

1. Analysis of Proposed Technical Specification Change 2. Proposed Technical Specification Changes (mark-up)3. Proposed Technical Specification Bases Changes (mark-up for information only)4. Proposed Technical Specification Changes (clean copy)

W3F1-2011-0040 Page 3 cc: Mr. Elmo E. Collins, Jr.Regional Administrator U. S. Nuclear Regulatory Com mission Region IV 612 E. Lamar Blvd., Suite 400 Arlington, TX 76011-4125 NRC Senior Resident Inspector Waterford Steam Electric Station Unit 3 P.O. Box 822 Killona, LA 70066-0751 U. S. Nuclear Regulatory Com mission Attn: Mr. N. Kalyanam Mail Stop O-07D1 Washington, DC 20555-0001 RidsRgn4Mai lCenter@nrc.gov marlone.davis@nrc.gov' Dean.Overland@nrc.gov Kaly.Kalyanam

@nrc.gov Attachment I to W3F1-2011-0040 Analysis of Proposed Technical Specification Change Attachment 1 to W3F1-2011-0040 Page 1 of 10

1.0 DESCRIPTION

This letter is a request to am end Operating License NPF-38 for the Waterford Steam Electric Station, Unit 3 (Waterford 3). Entergy will be replacing the two Waterford 3 steam generators (SGs) during the 1 8 th refueling outage which will commence in the fall of 2012. The Waterford 3 Technical Specifications (TS) 6.5.9, "Steam Generator (SG) Program," and TS 6.9.1.5,"Steam Generator Tube Inspection Report" contain a SG tube alternate repair criterion that is only applicable to the original S Gs. Therefore, this amendment request will propose the removal of this alternate repair criterion.

Additionally, the replacement SG (RSG) tubes will contain Alloy 690 Thermally Treated (TT) material.

Based on this improved tubing material, the SG tube inspection frequency periods are also bei ng requested for extension after the initial inspection post-SG replacement.

Entergy proposes to apply the guidance of Revision 2 to Technical Specification Task Force (TSTF)-510 (Reference 1)for the change in inservice inspection frequency.

Other changes consi stent with TSTF 510 are also being proposed including changes to TS 3/4.4.4,"Steam Generator Tube Integrity."

2.0 PROPOSED CHANGE

The proposed modification to TSs 6.5.9 and 6.9.1.5 will remove currently approved alternate repair criteria applicable to the original SGs and modify the SG tube inspection frequencies in the Waterford 3 Steam Generator Program for the new SG tube material.

These changes will be consistent with TSTF-510, Revision 2. The Waterford 3 SG Program currently contains one alternate repair criterion.

T his criterion excludes inspection and repair of the SG tube below a specified location in the hot leg tubes heet region. The following proposed TS changes will remove inspection, flaw acceptance, and reporting requirements associated with this alternate repair criterion.

In addition, TSTF-510 also contains modified SG Program language that is being proposed for the Waterford 3 TSs. These TS page are discussed below and markups for the proposed changes are contained in A ttachment 2 of this submittal." Revise TS 3/4.4.4 to apply a change in terminology from what was previously referenced as "tube repair criteria" to become "tube plugging criteria." This terminology is also revised in various locations of TS 6.5.9.* Revise TS 6.5.9 to remove the word "provisions" at the end of the first paragraph since this is duplicative to the bulleted items. This is an editorial change and is not further discussed.

• Revise TS 6.5.9.b.1 to relocate the closure of the parenthetical s tatement after "and cooldown" which is consistent with TSTF-510.

This inappropriately includes anticipated transients in the description of normal operating conditions.

This change is considered an editorial change and is not further discus sed.* Revise TS 6.5.9.c to remove the sentence which states: "The following alternate tube repair criteria may be applied as an alternative to the 40% depth based criteria."* Delete TS 6.5.9.c.1 in its entirety.

This specification allows flaws located greater than 10.6 inches below the bottom of the hot leg expansion transition to rem ain in service.* Revise TS 6.5.9.d to remove discussion regarding the alternate repair criterion.

The wording in this section is being revised to be consistent with TSTF-510.

Attachment 1 to W3F1-2011-0040 Page 2 of 10" Revise TS 6.5.9.d for the portion of the sentence where "An assessment of degradation..." is being changed to "A degradation assessment..."* Revise TS 6.5.9.d.1 to change the reference of "SG replacement" to "SG installation." This wording change will allow the Steam Generator Program to apply to both existing plants and new plants. This change is considered editorial and is not further discussed.

• Revise TS 6.5.9.d.2 to replace the current sequential SG tube inspection period requirements for Alloy 600 mill annealed tubing to that for new Alloy 690 TT material consistent with the guidance of TSTF-51 0 (see revised SG tube inspection frequency in Attachment 2). Note: A new TS page 6-7d is created due to rollover of previous text." Revise the first sentence in TS 6.5.9.d.3 to read: "If crack indications are found in any SG tube, then the next ins pection for each affected and potentially affected SG for the degradation mechanism that caused the crack indication shall not exceed 24 effective full power months or one refueling outage (whichever results in m ore frequent inspections)."* Revise TS 6.9.1.5.b and 6.9.1.5.e to remove the word "Active" for reporting degradation mechanisms discovered." Revise TS 6.9.1.5.f to read: "The number and percentage of tubes plugged to date, and the effective plugging percentage in eac h steam generator." This change also replaces TS 6.9.1.5.h which is being deleted." Revise TS 6.9.1.5.g to remove "...assessment of accident induced leakage from all tubesheet indications..." since this was added to address the alternate repair criterion.

The following changes are being proposed to the T S Bases as reflected in Attachment 3.Since TS Bases changes are controlled by the Waterford 3 T S Bases Control Program, they are being provided for information only.* Revise TS Bases 3/4.4.4 in several locations to apply a change in terminology for "tube plugging criteria."" Revise TS Bases 3/4.4.4 under Limiting Conditions for Operation, to remove the discussion regarding tubesheet ins pection depth as part of the defini tion of a SG tube.The wording in this section is being revised to be consistent with current language of TSTF-51 0 where no alternate repair criteria are proposed.* Add the following statement at the end of the fourth paragraph under Surveillance Requirements in TS Bases 3/4.4.4: "If crack indications are found in any S G tube, the maximum inspection interval for all affected and potentially affected SGs is restricted by Specification 6.5.9 until subsequent inspections support extending the inspection interval."* Delete Reference 7 of T S Bases 3/4.4.4 which is associated with WCAP-16208-P that is only applicable to the basis for the tubesheet inspection depth alternate repair criterion.

Attachment 1 to W3F1-2011-0040 Page 3 of 10

3.0 BACKGROUND

In response to Generic Letter 20 04-01 (Reference 2), Entergy determi ned that the Waterford 3 SG tube inspection scope was not consistent with the NRC position for performing tube inspections within the tubesheet region of the S G. As a result, Entergy committed to modify the Waterford-3 TSs to include a specific limitation for tubesheet depth inspection associated with the existing SGs. In letter dated March 15, 2005 (Reference 3), Entergy sought a license amendment for Waterford 3 that proposed an alternate repair criterion that would allow the tube inspection depth to be based on a joint industry testing program which was reported in WCA P-1 6208-P (Reference 4). T his report concluded that flaws below a defined inspection distance below the tubesheet expansion transition region do not pose a safety concern. Based on the results of WCAP-16208-P, Entergy determined that Waterford 3 could exclude inspections of the tube portion from 10.6 inches below the top of the tubesheet and would not affect S G operational safety. Any tube with unacceptable degradation within the tubesheet above this inspection distance would be plugged upon detection.

The NRC approved this license amendment request including supplements in Waterford 3 License Amendment 207 dated August 26, 2006 (Reference 5).Under a separate license amendment request by E ntergy, the NRC approved Waterford 3 License Amendment 204 (Reference

6) which c hanged the SG tube surveil lance program to be consistent with the approach and format approved by the NRC in TSTF-449-A (Reference 7).At the time of implementation of this change, the subsequent ins pection frequency for SG tube inspections was based on having m ill annealed Alloy 600 tubing (Alloy 600 MA). This amendment provided the current Waterfor d 3 SG Tube Integrity requirements in TS 3/4.4.4 and SG Program requirements in TS 6.5.9.TSTF-510, Revision 2 provides industry recommended improvements for SG tube inspection frequencies for that previously provided in the guidance of T STF-449-A, Revision 4 as well as enhancements to other SG Program sections.

Entergy believes that the guidance of TSTF-510 provides a more appropriate approach for SG tube inspection frequency.

Even though not approved, the NRC provided notice of opportunity for public comment on the model safety evaluation for TSTF-510 (Reference 8). However, due to the near ter m need to seek changes to the SG Program TSs in support of the upcoming Replacement SG outage, Entergy is requesting adoption of these im provements as a plant specific change for Waterford 3 instead of a Consoli dated Line Item Improvement Process (CLIIP) change.4.0 TECHNICAL ANALYSIS The Alloy 600 MA tubing material in the original SGs has shown to be susceptible to primary water stress corrosion crack ing (PWSCC). The Waterford 3 RS Gs have been designed usi ng Alloy 690 TT tubing. Alloy 690 TT tubing has been proven through both laboratory testing and operational experience to provide inc reased corrosion resistance compared to Alloy 600 MA. No steam generator tube degradation due to P WSCC has occurred in Westinghouse steam generators using Alloy 690 TT tube material.

Each of the original Waterford 3 SGs contain 9350 vertical U-tubes having an outside diam eter (OD) of 0.750 inches and a tube wall thickness of 0.048 inches. Each RSG will contain 8968 tubes having a tube OD of 0.750 inches and a tube wall thickness of 0.044 inches (rows 1 and 2) or 0.043 inches (rows 3 through 138).Alternate Repair Criteria -Steam generator tube wear is considered to be the only degradation mechanism that has the potential to reduce tube life and tube integrity for the Attachment 1 to W3F1-20111-0040 Page 4 of 10 RSGs. The tube wear is typically caused by fretting between a tube and a neighboring object. Based on the RSG design, unacceptable tube wear is not expected.

The RSGs include a number of features that minimize the potential for tube wear at the tube supports and the anti-vibration bars (AV Bs). Provisions to minimize the potential for wear include the spacing between the tube supports, the configuration of t he broached hole through the support plate, the surface fi nish of the broached hole in the tube s upport plate, the clearance between the tube and the hole in the tube support plate, tube support plate material selection, and the configuration of the A VB assemblies.

Based on the above design changes for the RSGs, Entergy believes that significant wear will be limited over the remaining life of the plant. Therefore, Entergy is eliminating the current alternate repair criterion that is only applicable to the original SGs and is not proposing any additions for new or different alternate repair criteria.SG Tube Structural Integrity Performance Criterion (SIPC) and Pluqging Criteria -Waterford 3 TS 6.5.9.b.1 requires that the SIPC be met for in-service steam generator tubes over the full range of norm al operating conditions and des ign basis accidents.

This includes retaining a safety factor of 3.0 against burst under normal steady state full power operation primary to secondary pressure d ifferential and a safety factor of 1.4 against burst applied to the design basi s accident primary to secondary pressure differential.

In addition, loading conditions associated with the design basis accidents shall also be evaluated to determine if the associated loads contribute significantly to burst or collapse.

In the assessment of tube integrity, those loads that do significantly affect burst or collapse shall be determined and assessed in combination with the loads due to pressure with a safety factor of 1.2 on the combined primary loads and 1.0 on axial secondary loads.The structural integrity analysis for the RS G tubing was perform ed by Westinghouse Electric Company under WCAP-17263-P, Revision 0 (Reference 9). This analysis used the guidance of Regulatory Guide (RG ) 1.121 (Reference

10) and NEI 97-06, Revision 2 (Reference 11). The primary purpose of this evaluation was to confirm the structural capability of the RSG tubing under normal and accident conditions and to show that the current 40% tube plugging criteria provided in TS 6.5.9.c is bounded by the RS G tube "structural limit" given anticipated tube wall degradation.

The evaluation was perform ed for a 40 year replacement steam generator life assuming 10% tube plugging.

The integrity of individual tubes considered both general and local ized degradation based on tube I oadings, tube stresses, and the minimum tube wall thickness given potential wear. For American Society of Mechanical Engineers (ASME) Code,Section III, Service Level A (normal plant operations), Level B (transients), and Level D (desi gn basis accidents) conditions, limiting stresses were determined for primary membrane stresses due to the primary-to-secondary pressure differen tial across the tube wall (Service Level C conditions were enveloped by Level D conditions).

Calculations were performed to establish the minimum wall requirements for uniform tube wear and for wear over limited axial extent at the tube support plate and AVB intersections.

The RSG tube structural analyses were performed for a 55% structural limit which provides sufficient margin above the 40% tube plugging criteria to account for potenti al flaw growth between tube ins ervice inspections during plant operation and for eddy current measurement uncertainty.

The calculated minimum tube wall thickness (tmin) values were based on stress limit criteria consistent with Section III of the ASME Code (Reference 12). The Attachment 1 to W3F1-20111-0040 Page 5 of 10 Waterford 3 analysis determined that the limiting tmin location was along the S G tube freespan region for the given heatup or cooldown transient.

T o bound the.prescribed 55% structural limit, the analysis was restricted to a maximum reactor coolant system (RCS) pressure of 200 0 psia below an RC S temperature of 4500 F and 2250 psia between a tem perature of 450°F and 470 0 F. Based on these heatup/cooldown pressure lim its, the RSG tubes will continue to retain the structural margin against gross failure or burst under normal operating, transient, and post accident conditions.

In addition, the margin against SG tube collapse was confirmed by showing that the S G tubes having uniform localized degradation retains sufficient strength over the secondary to primary differential pressure created from the limiting design basis Loss of Coolant Accident (LOCA). These heatup/cooldown R CS pressure and temperature restrictions are being controlled by Entergy for incorporation into the W aterford 3 operating procedures prior to implementation of the RS Gs.The analysis performed under WCA P-1 7263-P confirm s that the S IPC is met and the 40% tube plugging criteria provided in T S 6.5.9.c remain valid for the Waterford 3 RSGs. Therefore, there are no technical specification changes required based on results of this analysis.SG Tube Inservice Inspection Frequency

-The current SG tube inspection frequency contained under T S 6.5.9.d.2 for subsequent tube ins pections is based on having Alloy 600 MA tubing material.

Since this material is more susceptible to stress corrosion cracking, the inspection frequency is based on a 60 effective full power month period.Since the RS Gs use the latest im proved Alloy 690 TT materials, the inspecti on frequency can be appropriately extended.

However, in lieu of TSTF-449-A, Entergy proposes to apply TSTF-510 which provides more appropriate SG tube inspection frequency options based on the type and conditioning of SG tubing material.

Within each inspection period for Alloy 690TT tubing, the current guidance of TSTF-449-A establishes inspection requirements for the midpoint and end point of each period such that 50% of the tubes are inspected by the refueling outage nearest the midpoint, and the remaining 50% is inspected by the refueling outage nearest the end point. However, these inspection requirements can interfere with a plant's ability to operate for the maximum inspection interval allowed by the specification even when no degradation is present. Sampling requirements for the midpoint and end point of each inspecti on period, and requirem ents for addition of new sample plans after the start of an inspection period, are not wel I defined and can require a plant to adj ust the size of the inspection sam pie to meet these requirements.

As a result, Entergy is proposing to revise TS 6.5.9.d.2 to extend the inspection of 100% of the tubes to include four distinct SG tube inspection periods for Alloy 690TT tubing material after the first refueling outage fol lowing SG installation.

These periods are based on the guidance of TSTF-510 (see Insert 1 of Attachment 2).A provision is also included in TS 6.5.9.d.2 which prorates the inspections for new degradation types or locati ons. It requires that the fraction of I ocations to be inspected for new potential degradation types or locations at the end of the inspection period s hall be no less than the ratio of the number of times the SG is scheduled to be inspected in the inspection period after the determination that a new form of degradation could potentially be occurring at this location divided by the total number of times the SG is scheduled to be inspected in the inspection period. This change provides improved inspection flexibility.

Attachment 1 to W3F 1-2011-0040 Page 6 of 10 The interval between inspections must be supported by an as sessment that concludes tube integrity will be maintained for the period of planned operations.

T he assessment must be reviewed at each refueli ng outage regardless of whether a SG inspection is planned. If this assessment concludes that tube integrity cannot be ensured for the maximum interval between inspections, more frequent inspections are required.

In addition, if crack-like indications are found in any SG, the interval to the next inspection is limited by TS 6.5.9.d.3 to 24 effective full power months or one refueling outage (whichever results in more frequent inspections).

The specification would allow a SG which has tube cracking to return to a longer inspecti on frequency if cracking was not detected in a subsequent inspection provided it is supported with adequate justification in the degradation and operational assessments.

The potential that the total number of SG inspections completed during a given ins pection period may be less is offset by the addition of provisions to increase the minimum sample size at each inspection to ensure that 100% of tubes are inspected.

This justification also supports the provision to allow a 3 effective full power month extension of the inspection period to include a S G inspection outage in an inspection period. Thus, the proposed increase in the total length of each inspection period for 690TT tubing does not reduce or adversely impact the integrity of SG tubing. Waterford 3 is on an 18 month refueling outage cycle whereby the maximum inspection interval within an inspection period will not exceed every third refueling outage.Non-Technical Changes to the Waterford 3 SG Tube Inspection Program -The following provides a discussion of other changes to t he Waterford TSs affecting SG tube inspections:

1. Terminology in TS 3/4.4.4 and TS 6.5.9 is being changed from what was previously referred to as "tube repair criteria" to "tube plugging criteria." Since Waterford 3 will no longer have an approved repair process for the RS Gs, the term "tube plugging criteria" is more appropriate.

This change does not affect the manner in which the SG Program is being implemented and is consistent with TSTF-510 guidance.2. The change in TS 6.5.9.d from "An assessment of degradation" to "A degradation assessment" also represents an improvement in terminology.

The reference to a degradation assessment is more appropriate since this is a formal assessment process that is consistent with industry SG tube inspection guidance.

This change does not affect the manner in which the SG Program is being implemented and is consistent with TSTF-51 0 guidance.3. TS 6.5.9.d.3 is being changed to read: "If crack indications are found in any SG tube, then the next inspection for each affected and potentially affected SG for the degradation mechanism that caused the crack indication shall not exceed 24 effective full power months or one refueling outage (whichever results in m ore frequent inspections)." This language provides clarity to the term "each SG". The intention is that those SGs that are affected or potentially affected must be inspected for the degradation mechanism that caused the crack indication.

The current language could be misinterpreted that "each S G" requires only the SGs that are affected to be inspected for the degradation mechanism.

This change is consistent with TSTF-510 guidance.4. The revision to TS 6.9.1.5.b and 6.9.1.5.e which deletes the word "Active" for reporting degradation mechanisms discovered provides consistency with the remainder of the SG tube inspection program. The term "active" degradation mechanism is not defined or used elsewhere and should be referred to as just "degradation mechanism".

This Attachment 1 to W3F1-2011-0040 Page 7 of 10 change does not affect the manner in which the S G Program is being implemented and is consistent with TSTF-510 guidance.5. The revision to TS 6.9.1.5.f to read: "The number and percentage of tubes plugged to date, and the effective plugging percentage in each steam generator" and the deletion of TS 6.9.1.5.h, provides a more appropriate reporting process. Paragraph 6.9.1.5.f is revised to require reporting the effective plugging percentage.

Vendors of tube repair methods provide the equivalent R CS flow reduction to licensees for effective plugging percentage.

In practice the plugging percentage and the effective pl ugging percentage are the sam e. This change does not affect the manner in which the S G Program is being implemented and is consistent with TSTF-510 guidance.Therefore, the scope of the proposed changes to the Waterford 3 Steam Generator Tube Integrity and Steam Generator Program contained in the technical specifications will eliminate the existing alternate repair criterion which is not applicable to the RSGs and will extend the subsequent SG tube inspection period to conform w ith the SG Program requirements for the new tube materials as recommended by TSTF-510.

Other changes are either editorial or provide a more consistent approach for the implementation of the S G Program.5.0 REGULATORY ANALYSIS 5.1 Applicable Regulatory Requirements/Criteria Entergy Operations, Inc. (E ntergy) proposes to modify the steam generator (SG) tube integrity requirements contained in Waterford Steam Electric Station, Unit 3 (Waterford

3) Technical Specification (TS) 3/4.4.4, "Steam Generator Tube Integrity," TS 6.5.9, "Steam Generator (SG) Program," and TS 6.5.1.5, "Steam Generator Tube Inspection Report." The Waterford 3 TSs contain one alternate repair criterion which i s only applicable to the original S Gs. The original SGs are scheduled to be replaced in the fall 2012 refueling outage where this criterion will no longer be applicable.

Additionally, the allowed subsequent sequential SG tube inspection periods after initial inspection are being extended based on RSGs that contain Alloy 690 Thermally Treated (TT) material.

Other changes to the Waterford 3 TSs provide consistency and clarity to the SG Program. The SG Program structural integrity performance criterion and SG tube plugging criteria have also been confirm ed for the RSG tubing. The proposed changes w ill revise the Waterford 3 T Ss consistent with the discussion contained in the guidance in Technical Specification Task Force (TSTF) -510, Revision 2.In conclusion, Entergy has determined that the proposed changes do not require any exemptions or relief from regulatory requirements and does not adversely affect systems, structures, and components described in the Waterford 3 Updated F inal Safety Analysis Report (FSAR).

Attachment 1 to W3F1-2011-0040 Page 8 of 10 5.2 No Significant Hazards Consideration Entergy Operations, Inc. has evaluated whether or not a significant hazards consideration i s involved with the proposed am endment by focusing on the three standards set forth in 10 CFR 50.92, "Issuance of am endment," as discussed below: 1. Does the proposed change involve a significant increase in the probability or consequences of an accident previously evaluated?

Response:

No.The proposed change continues to implement the Waterford 3 Steam Generator (SG)Program performance criteria for tube structural integrity, accident induced leakage, and operational leakage for the replacem ent SGs. Meeting the performance criteria provides reasonable assurance that the replacem ent SG tubing will remain capable of fulfilling its specific safety function of maintaining reactor coolant system (RCS)pressure boundary integrity throughout each operating cycle and in the unlikely event of a design basis accident.The Steam Generator Tube Rupture (SGTR) is the primary accident analysis associated with SG tube integrity.

The replacement SG tubing contains improved materials that will reduce the likelihood of tubing flaws. The proposed change to remove alternate repair criteria from the SG inspection program does not affect the design of the replacement SGs, their method of operation, operational leakage limits, or primary coolant chemistry controls.

Sufficient SG tube structural margin above the 40% SG tube plugging criteria is retained for the replacem ent SGs to ensure that the probability of an accident is unchanged.

The replacement SGs are designed with substantial margin to burst. Therefore, the proposed change does not affect the probability of a S GTR accident.

The extension of the S G tube inspection frequency after initial inspection is based on the low likelihood of having potential tube flaws and is considered to be an acceptable i nspection period to preserve pressure boundary integrity.

As a result, there will be no affect on the previous dose anal ysis reported in the Updated Final Safety Analysis Report (FSAR) and the consequences of any accident are unchanged.

Therefore, this change does not involve a significant increase in the probability or consequences of an accident previously evaluated.

2. Does the proposed change create the possibility of a new or different kind of accident from any accident previously evaluated?

Response:

No.Steam generator tube rupture events have been postul ated and analyzed in the Waterford 3 FSAR. The improved Alloy 690TT SG tubing material in the Waterford 3 replacement SG reduces the likelihood of creating new or different types of tubing flaws. The proposed changes do not reduce the design requirements of the SG tubes that would affect the current accident analysis.

The proposed amendment does not impact any other plant systems or components.

The SG tube inspection TS requirements assure that potential tubi ng flaws will be detected prior to affect ing tube integrity and the RCS pressure boundary.

Attachment 1 to W3F1-2011-0040 Page 9 of 10 Therefore, the proposed change does not create the possi bility of a new or different kind of accident from any previously evaluated.

3. Does the proposed change involve a significant reduction in a margin of safety?Response:

No.The structural integrity, accident induced leakage, and operational I eakage performance criteria required by the Waterford 3 technic al specifications provide substantial design margin for assuring SG tube integrity against the possibility of a SG tube pressure boundary failure. The analyzed 55% structural limit provides sufficient margin above the SG tube pluggi ng criteria of 40% for consideration of eddy current measurement uncertainty and all owance for inspection cycle flaw growth. The proposed change removes an existing alternate repair criterion that is not applicable to the replacement SGs and establishes appropriate SG tube subsequent inspection periods consistent with the new SG tubing design. The replacement SGs will continue to meet their required performance criteria.

The Waterford 3 SG tube inspection program will assure that this margin is maintained through the operational life of the plant.Therefore, the proposed change does not inv olve a significant reduction in a margin of safety.Based on the above, Entergy concludes that the proposed amendment presents no significant hazards consideration under the standards set forth in 10 CFR 50.92(c), and, accordingly, a finding of "no significant hazards consideration" is justified.

5.3 Environmental Considerations The proposed amendment does not involve (i) a significant hazards consideration, (ii) a significant change in the types or significant increase in the amounts of any effluent that may be released offsite, or (iii) a significant increase in individual or cumulative occupational radiation exposure.

Accordingly, the proposed amendment meets the eligibility criterion for categorical exclusion set forth in 10 CF R 51.22(c)(9).

Therefore, pursuant to 10 CFR 51.22(b), no environmental impact statement or environmental assessment need be prepared in connection with the proposed amendment.

6.0 PRECEDENCE Similar changes to remove alternate repair criteria as part of SG replacements have been previously sought and approved for other licensees.

A recent example was that performed for Progress Energy's Crystal River Nuclear Plant which the NRC approved on May 29, 2009 (Reference 13). Entergy is not aware of any requested or approved NRC license amendment applications based on the guidance of TSTF-510.

Attachment 1 to W3F1-2011-0040 Page 10 of 10

7.0 REFERENCES

1. Technical Specification Task Force (TSTF)-510, "Revision to Steam Generator Program Inspection Frequencies and Tube Sample Selection", Revision 2, transmitted to the NRC on March 1,2011 under letterTSTF-11-02.

[ML110610350]

2. NRC Generic Letter 2004-01, "Requirements for Steam Generator Tube Inspections", August 30, 2004 [ML042370768].

3. Proposed Technical Specification Change Regarding T ubesheet Inspection Depth for Steam Generator Tube Inspections, March 15, 2005 (W3FI-2005-0009).

[M L050770200]

4. WCAP-16208-P, "NDE Inspection Length for CE Steam Generator Tubesheet Regi on Explosive Expansions", Revision 1, May 2005.5. NRC Amendment 207 issued to Entergy Operations on August 29, 2006, "Waterford Steam Electric Station, Unit 3 -Issuance of Amendment Re: Steam Generator Tube Inspections and Repair Criteria within the H ot-Leg Tubesheet Region" (TAC No.MC6421). [ML062220137]

6. NRC Amendment 204 issued to E ntergy Operations on July 31, 2006, "Waterfor d Steam Electric Station, Unit 3 -Issuance of Amendment Re: Steam Generator Tube Integrity" (TAC No. MC7973). [M L062000169]

7. Technical Specification Task Force (TSTF)-449-A, "Steam Generator Tube Integrity", Revision 4, May 5, 2006.8. Notice of Opportunity for Public Comment on the Proposed Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications, Task Force Traveler TSTF-510, Revision 2, "Revision to Steam Generator Program Inspection Frequencies and Tube Sample Selection", Federal Register Vol. 76, No. 118 /Monday, June 20, 2011, Notices, pages 35923 and 35924.9. WCAP-17263-P, "Regulatory Guide 1.121 Analysis and Structural Integrity Performance Criterion Application for the Waterford Unit 3 M odel Delta 110 Replacement Steam Generators for a NSSS Power of 1869.6 MWt/SG" (Proprietary)

Revision 0, November 2010 [Not a public record].10. U. S. Nuclear Regulatory Commission Regulatory Guide 1.121, "Bases for Plugging Degraded PWR Steam Generator Tubes" (for comment), August 1976.11. NEI 97-06, Revision 2, Steam Generator Program Guidelines (May 2005).12 ASME Boiler and Pressure Vessel Code, 1998 Edition with Addenda through 2000 Addenda, Section II1.13. NRC Amendment 234 issued to Progress Energy on M ay 29, 2009, "Crystal River Unit 3-Issuance of Amendment Regarding the Revis ion of the Steam Generator Portion of the Technical Specifications to Reflect the Replacement of the Steam Generators" (TAC No.MD9547). [ML091100056]

Attachment 2 to W3FI-2011-0040 Proposed Technical Specification Changes (mark-up)

Attachment 2 to W3F1-2011-0040 Page 1 of 6 REACTOR COOLANT SYSTEM 3_4.44 STEAM GENERATOR (SG) TUBE INTEGRITY LIMITING CONDITION FOR OPERATION 3.4.4 a. SG tube integrity shall be maintained, and b. All SG tubes satisfying the tube riteria shall be plugged in accordance with the Steam Generator Program.APPLICABILITY:

MODES 1, 2, 3, and 4.ACTION: NOTE: Separate ACTION entry is allowed for each SG tube.a. With one or more SG tubes satisfying the tub e ai and not plugged in accordance with the Steam Generator Program.1. Within 7 days verify tube Integrity of the affected Lube(s) is maintained until the next refueling outage or SG tube inspection, and 2. Plug the affected tube(s) in accordance with the Steam Generator Program prior to entering HOT SHUTDOWN following the next refue!ing outage or SG tube inspection.

b. If the required ACTION and Allowed Outage Time of ACTION a above cannot be met or SG tube integrity cannot be maintained, be in HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />, SURVEILLANCE REQUIREMENTS 4.4.4.1 Verify SG tube integrity in accordance with the Steam Generator Program.4.4.4.2 Verify that each inspected SG tube that satisfies the tub s plugged in accordance with ihe Steam Generator Program prior to entering HOT SHUTDOWN followinq a SG tLube inspection, WATERFORD

-UNIT 3 3/4 4-10 NO. 204 Attachment 2 to W3F1-2011-0040 Page 2 of 6 ADMINISTRATIVE CONTROLS 6.5.8 INSERVICE TESTING PROGRAM This program provides controls for inservice testing of ASME Code Class 1, 2, and 3 components.

The program shall include the following:

a. Testing frequencies specified in Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda as follows: ASME Boiler and Pressure Vessel Code and applicable Required frequencies Addenda terminology for for performing inservice inservice testing activities testinq activities Weekly At least once per 7 days Monthly At least once per 31 days Quarterly or every 3 months At least once per 92 days Semiannually or every 6 months At least once per 184 days Every 9 months At least once per 276 days Yearly or annually At least once per 366 days Biennially or every 2 years At least once per 731 days b. The provisions of Specification 4.0.2 are applicable to the above required frequencies for performing inservice testing activities.

c. The provisions of Specification 4.0.3 are applicable to inservice testing activities, and d. Nothing in the ASME Boiler and Pressure Vessel Code shall be construed to supersede the requirements of any Technical Specification.

6.5.9 STEAM GENERATOR (SG) PROGRAM A Steam Generator Program shall be established and implemented to ensure that SG tube ineritis maintained.

In addition, the Steam Generator Program shall include the following a. Provisions for condition monitoring assessments.

Condition monitoring assessment means an eva!uation of the' as found" condition of the tubing with respect to the performance criteria for structural integrity and accident induced leakage. The 'as foLundýcondition refers to the condition of the tubing during an SG inspection outage, as determiined froim the inservice inspection results or by other means, prior to the plugging of tubes. Condition monitoring assessments shall be conducted during each outage during which the SG tubes are inspected or plugged to confirm that the performance criteria are being met.WATERFORD

-UNIT 3 6-7a AMENDMENT NO. -69, 204 Attachment 2 to W3F1-2011-0040 Page 3 of 6 ADMINISTRATIVE CONTROLS STEAM GENERATOR (SG) PROGRAM (Continued)

b. Performance criteria for SG tube integrity.

SG tube integrity shall be maintained by meeting the performance criteria for tube structural integrity, accident induced leakage, and operational leakage.1. Structural integrity performance criterion:

All in-service steam generator tubes shall retain structural Integrity over the full range of normal operating conditions (including startup, operation in the power range, hot standby. and cool dowr~qid-" all anticipated transients included in the design specificatiorVand design basis accidents.

This includes retaining a safety factor of 3.0 against burst under normal steady state full power operation primary to secondary pressure differential and a safety factor of 1.4 against burst applied to the design basis accident primary to secondary pressure differentials.

Apart from the above requirements, additional loading conditions associated with the design basis accidents, or combination of accidents in accordance with the design and licensing basis, shall also be evaluated to determine if the associated loads contribute significantly to burst or collapse.

In the assessment of tube integrity, those loads that do significantly affect burst or collapse shall be determined and assessed in combination with the loads due to pressure with a safety factor of 1.2 on the combined primary loads and 1.0 on axial secondary loads.2. Accident induced leakage performance criterion:

The primary to secondary accident induced leakage rate for any design basis accident, other than a SG tube rupture, shall not exceed the leakage rate assumed in the accident analysis in terms of total leakage rate for all SGs and leakage rate for an individual SG.Primary to secondary leakage is not to exceed 540 gpd through any one SG.3. The operational leakage performance criterion is specified in LCO 3.4.5.2."Reactor Coolant System Operational Leakage." c. Provisions for SG tube Fepa4 r criteria.

Tubes found by inservice inspection to contain flaws with a depth equal to or exceeding 40% of the nominal tube wall thickness shall be plugged.'I. F 189 itea za gFPteF tz 1ý811 ~ r 10.6 nchoht bk=~' Of iQtof I '~ 'i0qm HeiiZ eF iap~ic er !h e!lg ft beho z Iet~zot, whiaheo'i~r Wwwc, WH a3IR Pho 1984MR Of !hPo 13.t le§ eXO~iel eF 'eP~o o eto tke hot leao tul-cohoo~.hiohcxor hi hao, hll bk9-fjW9o1 o dtoe.. .. .. ... .... , ,9 O .. .. .6 ,4 ...... ... ..."' ...WATERFORD

-UNIT 3 6-7b AMENDMENT NO. ie4,,207 Attachment 2 to W3F1-2011-0040 Page 4 of 6 ADMINISTRATIVE CONTROLS Cthe tu~be--to--tubesheet weld at the STEAM GENERATOR (SG) PROGRAM (Continued) tUn:let d. Provisions for SG tube inspections.

Periodic SG tube inspections shall be performed.

The number and portions of the tubes inspected and methods of inspection shall be performed with the objective of detecting flaws of any type (e.g., volumetric flaws, axial and circumferential cracks) that may be present along the length of the tube, from to W the tube-to-tubes ee~ed he et tean a may satisfy thýe applicable tube critera. he tube-to-tubesheet weld is not part of the tube. In addition to meeting the requirements of d.1, d.2, and d.3 below, the inspection scope, inspection methods, and inspection intervals shall be such as to ensure that SG tube integrity is maintained until the next SG inspection.

Ap-sse'ssmee shall be performed to determine the type and location of flaws to which the tubes may be susceptible and, based on this assessment, to determine which inspection methods need to be employed and at what locations.

1. Inspect 100% of the tubes in each SG during the first refueling outage following SG fQ~eneie"t.

6,SbLt,&--,a.

2. i,.zpeetkrn 100; of lhe hlges at zziguontial poriodc of 60 affectG~l t2'l po~r ( onhs. Tho firet oqctioperied shall 6e eoMidt...

.... e..f.f....i.Re...t h~zr~izz.

s.eptien.

ef the &Co.. e SG shall Sporatcc f9r mcro thlaAr 21 3. If crack indications are found in any SG tube, then the next inspection for each SG for the degradation mechanism that caused the crack indication shall not exceed 24 effective full power months or one refueling outage (whichever+ie.

Jee:9. If definitive information, such as from examination of a pulled tube, diagnostic non-destructive testing, or engineering evaluation indicates that aa crack-like indication is not associated with a crack(s), then the indication need not be treated as a crack.e. Provisions for monitoring operational prmary to secondary leakage.affected and potentially affected results in more frequent inspections WATERFORD

-UNIT 3 6-7c AMENDMENT NO.,2e,, 2K07 Attachment 2 to W3F1-2011-0040 Page 5 of 6 Insert I (TS Section 6.5.9.d.2)

After the first refueling outage following SG installation, inspect each S G at least every 72 effective full power months or at least every th ird refueling outage (whichever results in more frequent inspections).

In addition, the minimum number of tubes inspected at each scheduled inspection shall be the number of tubes in all SGs divided by the number of SG inspection outages scheduled in each ins pection period as defined i n a, b, c and d below. If a degradation asses sment indicates the potential for a type of degradation to occ ur at a location not previously inspected with a technique capable of detecting thi s type of degradation at this location and that may satisfy the applicable tube repair criteria, the minimum number of locations inspected with such a capable inspection technique during the rem ainder of the inspection period may be prorated.

The fraction of locations to be inspected for this potential type of degradation at thi s location at the end of the inspecti on period shall be no less than the ratio of the number of times the SG is scheduled to be inspected in the inspection period after the determination that a new form of degradation could potentiall y be occurring at this location divided by the total num ber of times the SG is scheduled to be inspected in the i nspection period. Each inspection period defined below m ay be extended up to 3 effective full power months to include a SG inspection outage in an inspection period and the subsequent inspection period begins at the conclusion of the included SG inspection outage.a) After the first refueling outage foil owing SG installation, inspect 100% of the tubes during the next 144 effective full power months. This constitutes the first inspection period;b) During the next 120 effective full power months, inspect 100% of the tubes. This constitutes the second inspection period;c) During the next 96 effective full power months, inspect 100% of the tubes. This constitutes the third inspection period; and d) During the remaining life of the SGs, inspect 100% of the tubes every 72 effective full power months. This constitutes the fourth and subsequent inspection periods.

Attachment 2 to W3F1-2011-0040 Page 6 of 6 ADMINISTRATIVE CONTROLS ANNUAL REPORTS (Continued)

(1) Reactor power history starting 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> prior to the first sample in which the limit was exceeded;(2) Results of the last isotopic analysis for radioiodine performed prior to exceeding the limit, results of analysis while limit was exceeded and results of one analysis after the radioiodine activity was reduced to less than limit. Each result should include date and time of sampling and the radioiodine concentrations; (3) Clean-up system flow history starting 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> prior to the first sample in which the limit was exceeded;(4) Graph of the 1-131 concentration and one other radioiodine isotope concentration in microcuries per gram as a function of time for the duration of the specific activity above steady-state level; and (5) The time duration when the specific activity of the primary coolant exceeded the radioiodine limit.6.9.1.5 STEAM GENERATOR TUBE INSPECTION REPORT A report shall be submitted within 180 days after the initial entry into HOT SHUTDOWN following completion of an inspection performed in accordance with the Specification 6.5.9, Steam Generator (SG) Program. The report shall include: a. The scope of inspections performed on each SG, b. Q mechanisms found, c. Nondestructive examination techniques utilized for each degradation mechanism, d. Location, orientation (if linear), and measured sizes (if available) of service induced indications, e. Number of tubes plugged during the inspection outage for each)jdegradation mecha sm, 'and the affective Plugging percenta'f. nuimber and percentage of tubes plugged to date .Un each steam generatr g. The results of condition monitorinc, includina the results of tu lls, in-situ ting, -g..,,, ... t" ig (OF Ell -.-WATERFORD

-UNIT 3 6-17a AMENDMENT NO. 8, 11+/-6, 188,-2EY, 2e4, 207 Attachment 3 to W3FI-2011-0040 Proposed Technical Specification Bases Changes (Mark-up provided for information only)

Attachment 3 to W3F1-2011-0040 Page 1 of 4 For accidents that do not involve fuel damage, the primary coolant activity level is assumed to be equal to the LCO 3.4.7 RCS Specific Activity limits. For accidents that assume fuel damage, the primary coolant activity is a function of the amount of activity released from the damaged fuel.The dose consequences of these events are within the limits of GDC 19 (Reference

2) and 10 CFR 50.67 (Reference 3). Steam generator tube integrity satisfies Criterion 2 of 10 CFR 50.36(c)(2)(ii).,, -- ..../between the tube-to-tubesheet weld Limiting Condition for Operation at the tube inlet an The LCO requires thatG tube integrity be maintained.

The LCO also requires that all SG tubes that satisfy the = criteria be plugged in accordance with the Steam Generator Program. f 4 AV*During a SG inspection, any inspected tube that satisfies the Steam Generator Program fe& #d,4)1 criteria is removed from service by plugging.

If a tube was determined to satisfy the but was not plugged, the tube may still have tube integrity.

In the context of ttjs Specification, a SG tube is defined as the entire length of the tube, including the tube wal mi '19A,,,c~ ; ",',-' ;,,[m t e U e ub -totu eheet weldl at ttmhe ub outlet. The tube-t eq el isno considere part of the tube.A SG tube has tube integrity when it satisfies the SG performance criteria.

The SG performance criteria are defined in Specification 6.5.9, Steam Generator Program, and describe acceptable SG tube performance.

The Steam Generator Program also provides the evaluation process for determining conformance with the SG performance criteria.There are three SG performance criteria:

structural integrity, accident induced leakage, and operational leakage. Failure to meet any one of these criteria is considered failure to meet the LCO.The structural integrity performance criterion provides a margin of safety against tube burst or collapse under normal and accident conditions, and ensures structural integrity of the SG tubes under all anticipated transients included in the design specification.

Tube burst is defined as, "The gross structural failure of the tube wall. The condition typically corresponds to an unstable opening displacement (e.g., opening area increased in response to constant pressure) accompanied by ductile (plastic) tearing of the tube material at the ends of the degradation." Tube collapse is defined as, "For the load displacement curve for a given structure, collapse occurs at the top of the load versus displacement curve where the slope of the curve becomes zero." The structural integrity performance criterion provides guidance on assessing loads that significantly affect burst or collapse.

In that context, the term ,significantly" is defined as "An accident loading condition other than differential pressure is considered significant when the addition of such loads in the assessment of the structural integrity performance criterion could cause a lower structural limit or limiting burst/collapse condition to be established." For tube integrity evaluations, except for circumferential degradation, axial thermal loads are classified as secondary loads. For circumferential degradation, the classification of axial thermal loads as primary or secondary loads will be evaluated on a case-by-case basis. The division between primary and secondary classifications will be based on detailed analysis and/or testing.Structural integrity requires that the primary membrane stress intensity in a tube not exceed the yield strength for all ASME Code,Section III, Service Level A (normal operating conditions) and Service Level B (upset or abnormal conditions) transients included in the WATERFORD

-UNIT 3 B 3/4 4-3a CHANGE NO. 48,49 Attachment 3 to W3F1-2011-0040 Page 2 of 4 design specification.

This includes safety factors and applicable design basis loads based on ASME Code, Section 1t1, Subsection NB ;Reference

4) and Draft Regulatory Guide 1.121 (Reference 5).The accident induced leakage performance criterion ensures that the primary to secondary leakage caused by a design basis accident, other than a SGTR. is within the accident analysis assumptions.

The accident analysis assumes 'tlat accident induced leakage does not e(xceed 540 gpd through any one SG. The accident induced leakage late includes any primary to secondary leakage existing prior to the accident in addition to primary to secondary leakage induced during the accident.The operational leakage performance criterion provides an observable indication of SG tube conditions during plant operation.

The limit on operational leakage is contained in LCO 3.4.5.2. Reactor Coolant System Operational Leakage. and limits primary to secondary leakage through any one SG to < 75 gallons per day. This iin. is based on assumptions in radiological analyses.

This limit is less than the 1560 gallons per day through any one SG limit of NEI 97-06. which assumes that a single crack leaking this amounl would not propagate to a SGTR under the stress conditions of a LOCA or a Main Steam Line Break. If this amount of leakage is due to more than one crack, the cracks are very small, and the above assumption is conservative.

Actions The ACTIONS are modified by a Note clarifying that the ACTIONS may be entered independently for each SG tube. This is acceptable because the ACTIONS provide appropriate compensatory actions for each affected SG tube, Complying with the ACTIONS may allow for continued operations, and subsequent affected SG tubes are governed by subsequent application of associated ACTIONS.ACTION 'a" applies ifit is Iscovered that one or more SG tubes exarmined in an inservice inspection satisfy the tube e criteria but were not plugged in accordance with the Steam Generator Program as required by SR 4.4.4.2. An evaluation of SG tube integrity of the affected tube's) must be made. Steam generator lube integrity is based on meeting the S1 C ,WI-J performance criteria described in the Steam Genetatur Program. The SC '. rria e liitis on SG tube degradation that allow for flaw growth between inspections while stitl providing assurance that the SG performance criteria wiiI continue to be met. In order to determine if a SG tube that should have been plugged has tube integrity, an evaluation must be completed that demonstrates that the SG performance criteria will continue to be met until the next refueling outage or SG tube inspection.

Tbhe tube integrity determination is based on the e.stimated condition of the tue at the time the situation is discovered and the estimated growth of the degradation prior to the next SG tube inspection.

If it is deteW:rnred that tube integrity is not being maintained, ACTION b' applies.An allowed outage time of 7 days is sutfficient to complete the evaluation while minimizing the risk of plant operation with a SG tube that may not have tube integrity.

It the evaluation deterrnines

'hat the alfected tube(s) have tube integrity.

ACTION a.2" allows plant operation to o,}ntirrue until the next relueiinng outage or SG insipe5ction provided the inspection in!erval continues to oe suppovted by an operational assessment that reflects the affected tubes.However, the affected tube(s) rust be plugged prior to entering HOT SHUTDOWN WAvEFORD -U,"NIT 3 B 314 4-3b CHAINIGE NO, .18 Attachment 3 to W3F1-2011-0040 Page 3 of 4 following the next refueling outage or SG inspection.

This time period is acceptable since operation until thte next inspection is supported by the oporational assessmnent.

ACTION 'b" applies if the ACTIONS and associated allowed outage time of ACTION "a' are not met or if SG tube integrity is not being maintained, the reactor must be brought to HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />. The allowed outage times are reasonable, based on operating experience, to reach the desired plant conditions from ful! power conditions in an orderly manner and without challenging plant systems.Surveillance Requirements During shutdown periods the SGs are inspected as required by SR 4.4.4.1 and the Stearn Generator Program. NEI 97-06. Steam Generalor Program Guwdehines (Reference 1). and its referenced EPRI Guidelines, establish the content of the Steam Generator Program. Use of the Steam Generotor Program ensures that the inspection is appropriate and consistent with accepted industry practices.

During SG inspections a condition monitoring assessment of the SG tubes is performed.

The condition monitoring assessment determines the "as found" condition of the SG tubes. The purpose of the condition monitoring assessment is to ensure that the SG performance criteria have been met for the previous operating period.T-he Steam Getterator Program determines the scope of the inspectoand the methods used to determine whether the tubes contain flaws satisfying the criteria.

Inspection scope (i.e., which tubes or areas of tubing within the SG are to be inspected) is a function of existing and potential degradation locations.

The Steam Generator Program also specifies the inspection methods to be used to find potential degradation.

Inspection methods area fuinction of degradation

norohology, non-destructive examination (NDE) technique capabilities, and inspection locations.

The Steam Generator Program defines the frequency of SR 4.4.4.1. The frequency is determined by the operational assessment and other limits in the SG examination guidelines (Reference 6). The Steam Generator Program uses information on existing degradations and growth rates to determine an inspection frequency that provides reasonable assurance that the tubing will meet the SG performance criteria at the next scheduled inspection.

In addition.Specification 6.5.9 contains prescriptive requirements concerning inspection intervals to provide added assurance that the SG performance criteria ,ill be met between scheduled inspections.

As required by SR 4.4.4 2. any inspectrc tu 7 eethat satisfies the o'eam Generator Program ,%t criteria is removed from service by lugging. The tube .criteria delineated in Specification 6.5,9 are intended to ensure. fhat tubes accepted for conlinued service satisfy the SG performance criteria with allowance for error in the flaw size measurement and for future flaw growth in addition, the tube ,, riteria, if, conjunction wi.Jh other elements of the Steam r"eneralor Pro q,.vrrn, ensure that the SG peiformance criteria will continue to be met untii tile next inspection of the subiect tube(s). Reference I provides guidance for performing operational a.sess- ne.nts to verify that the tubes remaining in service will continue to meel the SG performance criteria.If crack indications are found in any SG tube, the maximum inspection interval for all affected and potentially affected SGs is restricted by Specification 6.5.9 until subsequent inspections support extending the inspection interval.VVATERFOR[.)

-- U I'll r .3 6 3/4 4-3t;CHANGE '41. 4:8 Attachment 3 to W3F1-2011-0040 Page 4 of 4 The frequency of prior to entering HOT SHUTDOWN following a SG inspection ensures that the Surveillance has been completed and all tubes meeting the criteria are plugged prior to subjecting the SG tubes to significant primary to secondary pressur~edifferential.

REFERENCES

1. NEI 97-06, Steam Generator Program Guidelines.

2. 10 CFR 50 Appendix A, GDC 19.3. 10 CFR 50.67.4. ASME Boiler and Pressure Vessel Code,Section III, Subsection NB.5. Draft Regulatory Guide 1.121, Basis for Plugging Degraded Steam Generator Tubes, August 1976.6. EPRI, Pressurized Water Reactor Steam Generator Examination Guidelines.

",ORcN t TO:bz9hzz Cb.i' 413)'zE;~wi1,wv'2 WATERFORD

-UNIT 3 B 3/4 4-3d CHANGE NO. 46, 49 I Attachment 4 to W3FI-2011-0040 Proposed Technical Specification Changes (Clean Pages)(contains 6 pages)

.REACTOR COOLANT SYSTEM 3/4.4.4 STEAM GENERATOR (SG) TUBE INTEGRITY LIMITING CONDITION FOR OPERATION a. SG tube integrity shall be maintained, and b. AII.SG tubes satisfying the tube plugging criteria shall be plugged. in accordance with the Steam Generator Program.APPLICABILITY:

MODES 1, 2, 3, and 4.ACTION: NOTE: Separate.

ACTION entry is allowed for each SG tube.a. With one or more SG tubes satisfying the tube -plugging criteria and not plugged in.accordance with the Steam Generator Program.1. Within 7 days verify tube integrity of the affected tube(s) is maintained until the.next refueling outage: or SG. tube inspection,.and

2. Plug the affected tube(s). in accordance with the Steam Generator Program prior to entering HOT SHUTDOWN following the next refueling outage or SG tube. inspection.

• b. If the required ACTION and Allowed Outage Time of ACTION a above cannot be. met or SG tube integrity cannot be maintained, be in HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.SURVEILLANCE REQUIREMENTS 4.4.4.1 Verify SG tube integrity:

in accordance with the :Steam Generator Program.4.4.4.2 Verify that each inspected SG tube that satisfies the tube plugging -criteria is plugged in accordance with .the Steam Generator Program prior to entering HOT SHUTDOWN following a SG tube inspection.

WATERFORD

-UNIT 3 3/4 4-10 AMENDMENT NO. -29,

.ADMINISTRATIVE CONTROLS ANNUAL REPORTS (Continued)

(1) Reactor power history starting 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> prior to the first sample in which the. limit .was exceeded;(2) Results of the. last isotopic analysis for radioiodine performed prior to exceeding the limit, results of analysis while limit Was exceeded and results:of one analysis after the radioiodine activ ity was reduced to less than limit. Each result should include date and time of sampling and the radioiodine concentrations; (3) Clean-up system flow.history starting 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> prior to the first sample in which the limit was exceeded;(4) Graph of the 1-131 concentration and one other radioiodine isotope concentration in microcuries per gram as a function of time for the duration of the specific activityabove steady-state level; and (5) Thetime duration when the specific activity of the primary coolant exceeded the ra.dioiodine limit.6.9.1.5 STEAM GENERATOR TUBE INSPECTION REPORT'A report shall be submitted within 180 days after the initial entry into HOT SHUTDOWN following completion of an inspection performed in accordance with the Specification 6-5.9, Steam Generator (SG) Program. The report shall include: a. The scope of inspections performed on each SG, b. Degradation mechanisms found,.c. Nondestructive examination techniques utilized for each degradation mechanism;

d. Locationorientation (if linear), and measured*

sizes (if available).of service :induced indications, e. Number of tubesplugged during the inspection outage for each degradation.

mechanism,.

f.. The.number and percentage of tubes plugged to date, and.the effective plugging percentagein each.steam generator, and g. The results of condition monitoring, including the. results of tube pulls, in'situ testing.WATERFORD

-UNIT 3 6-17a AMENDMENT NO. 8,+6,+86, 2. .,-2e4-if, --,

ADMINISTRATIVE CONTROLS STEAM GENERATOR (SG) PROGRAM (Continued).

a. Performance criteria for SG tube integrity.

SG tube integrity shall be maintained by meeting the performance criteria for tube structural integrity,.accident induced leakage, and operational leakage.1. Structural integrity performance criterion:

All in-service steam generator tubes shall retain structural integrity over the full range of normal operating conditions (including.startup, operation in the power range, hot standby, and cool down), all anticipated transients included in the design specification, and.design basis accidents.

This includes.

retaining a safety factor of 3.0 against burst under normal steady state full power operation primary to secondary pressure differential and a safety factor of 1.4 against burst applied to the design basis: accident primary to secondary pressure differentials.

Apart from the above requirements, additional loading conditions associated with the design basis accidents,.or combination of accidents in accordance with the design and licensingbasis,, shall also be evaluated to determine if the associated loads contribute, significantly to burst or collapse.

In the assessment of tube integrity, those loads.that~do significantly affectburst or collapse shall be determined and assessed in combination with the loads due to pressure with a safety factor of 1:.2 on the combined primary loads and 1.0 on axial secondary.loads, 2. Accident induced leakage performance criterion:

The primary to secondary accident induced leakage rate for any design basis accident, other than a SG tube rupture, shallnot exceed the leakage rate assumed in the accident analysis in terms of total.leakage, rate for all SGs and leakage rate for an individual SG., Primary to.secondary leakage is not to exceed 54.0. gpd through any one SG.3. The operational leakage performance criterion is specified in LCO 3.4.5.2,"Reactor Coolant System Operational Leakage." c. Provisions for SG tube plugging criteria..

Tubes found by inservice inspection to contain flaws with a depth equal to or exceeding

.40% of the nominal tube wall thickness shall be plugged.WATERFORD

-UNIT. 3 6-7b AMENDMENT NO. -2e4, -i2, ADMINISTRATIVE CONTROLS STEAM GENERATOR (SG) PROGRAM (Continued)

d. Provisions for SG tube inspections.

Periodic SG tube inspections shall be performed.

The number and portions of the tubes inspected.

and methods of inspection shall be performed with the objective of detecting flaws of any type (e.g., volumetric flaws, axial.and, circumferential cracks) that may be present along the. length of the tube, from the tube-to-tubesheet Weld at the tube .inlet to the tube-to-tubesheet weld at the: tube outlet and that may satisfy the applicable tube plugging criteria.

The tube-to-tubesheet weld is.not part of the tube. In addition to meeting the requirements of d-l, d.2, and d.3 below,*the inspection scope, inspection methods, and inspection intervals shall be such as to ensure that SG tube integrity is maintained until the next SG inspection, A degradation assessment shall be performed to. determine the type and location of flaws to which the tubes may be susceptible and, based on this assessment, to determine which inspection methods. need to be employed and at. what.,locations.

1. Inspect 100% of the tubes in each SG during. the firstrefueling outage following SG installation.

2. After the first refueling outage following SG installation, inspect each SG at least every 72"effective full power months or at least every third refueling outage (whichever results in more frequent inspections).

In addition, the minimum nurmber of tubes.inspected at each scheduled inspection shall. be the number of tubes in all SGs divided by the.number of SG inspection outages scheduled in each inspection period as.defined in a, b, c and d below. If a degradation assessment indicates the potential for a type of degradation to occur ata location not previously inspected.with a technique capable of detecting this type of degradation at this location and that may satisfy the applicable tube repair criteria, the minimum.number of locations inspected with such a capable inspection technique during the remainder of the inspection period may be: prorated.

The fraction .of locations to be inspected for this potential type of degradationat this location at the end. of the inspection period shall be no less than the ratio of the number of times, the SG is scheduled to. be inspected in the inspection period after the determination that a new-form of degradation.could potentially be occurring at this. locationdivided by the total number of times the SG is scheduled to be inspected in the inspection period.. Each inspection period defined below may be extended up to 3 effective full power months to :include a SG.inspection outage in an inspection period and the: subsequent inspection period begins at~the conclusion of the included SG inspection outage..a) After the first refueling outage following SG installation, inspect 10.0% of the tubes during the next 144 effective full power months. This constitutes the first inspection period;b) During the next 120 effective.

full power months, inspect 100% of the tubes. This constitutes the second inspection period;WATERFORD:-

UNIT 3 6-7c.AMENDMENT NO. -e*,.-ff1 ADMINISTRATIVE CONTROLS.STEAM GENERATOR (SG).PROGRAM (Continued) c) During the next 96 effective-full power months,. inspect 100% of. the tubes,.This constitutes the. third inspection period; and.d) During the remaining life. of the SGs, inspect 100% of the tubesý every 72: effective full power months. This constitutes the fourth and subsequent

inspection periods.3. If crack. indications are found in: any SG tube, then the next inspection for each affected and potentially affected.

SG for the degradation mechanism that.caused the crack indication shall not exceed 24 effective full power months or one. refueling outage (whichever results in .more frequent inspections), If definitive information, such as from examination of a pulled tube, diagnostic non-destructive testing, or engineering evaluation.indicates that a crack-like indication is not associated with a crack(s)j then the indication need not be treated as.a crack;.e, Provisions for monitoring operational primary to secondary leakage.WATERFORD

-UNIT 3.6-7d AMENDMENT NO. I ADMINISTRATIVE CONTROLS ANNUAL REPORTS (Continued)

(1.) Reactor power history starting 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> prior to.the first sample, in which the limit was exceeded;(2) Results of the last isotopic analysis for radioiodine performed prior to exceeding the limit, results of analysis while limit was exceeded and results of one analysis after, the radioiodine activity was reduced to less than limit. Each resultshould include date.and time of sampling and the radioiodine concentrations;.

(3) Clean-up system flow history starting 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> prior to the first-sample in which the limit was exceeded;(4) Graph of the 1-131 concentration and one other radioiodine isotope concentration in microcuries.

per gram as a function oftimefor the duration of the specific activity above steady-state level; and: (5) The time duration when the specific activity of the primary coolant exceeded the radioiodine limit.6.9.1.5 STEAM GENERATOR TUBEINSPECTION REPORT A report shall be submitted within 180 days after the initial entry into. HOT SHUTDOWN following completion of an inspection performed in accordance with the Specification 6.5.9, Steam Generator (SG) Program. The report shall include: a. The scope ofinspections performed on each SG, b. Degradation mechanisms found,.c. Nondestructive examination techniques utilized for each degradation mechanism, d. Location, orientation (if linear), and measured.sizes (if available) of service induced indications, e. Number of tubes plugged during the inspection outage for each degradation mechanism, f. The number and percentage of tubes plugged to date,.and the effective plugging percentage in each steam generator, g. The results of.condition monitoring, including the results of tube pulls and in-situ testing.I WATERFORD

-UNIT 3 6-17a AMENDMENT NO., 116,,, -2e-2, 2 04, -2e-7,