ML101260533

Technical Specification Bases Manual

ML101260533
Person / Time
Site:	Susquehanna
Issue date:	04/28/2010
From:	Susquehanna
To:	Gerlach R M Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML101260533 (33)

Text

Apr. 28, 2010 Page I of 2 MANUAL HARD COPY DISTRIBUTION DOCUMENT TRANSMITTAL 2010-19743 USER INFORMATION:

GERLACH*ROSE M EMPL#:028401 CA#: 0363 Address: NUCSA2 Phone#: 254-3194 TRANSMITTAL INFORMATION:

TO: GERLACH*ROSE M 04/28/2010 LOCATION:

USNRC FROM: NUCLEAR RECORDS DOCUMENT CONTROL CENTER (NUCSA-2)THE FOLLOWING CHANGES HAVE OCCURRED TO THE HARDCOPY OR ELECTRONIC MANUAL ASSIGNED TO YOU. HARDCOPY USERS MUST ENSURE THE DOCUMENTS PROVIDED MATCH THE INFORMATION ON THIS TRANSMITTAL.

WHEN REPLACING THIS MATERIAL IN YOUR HARDCOPY MANUAL, ENSURE THE UPDATE DOCUMENT ID IS THE SAME DOCUMENT ID YOU'RE REMOVING FROM YOUR MANUAL. TOOLS FROM THE HUMAN PERFORMANCE TOOL BAG SHOULD BE UTILIZED TO ELIMINATE THE CHANCE OF ERRORS.ATTENTION: "REPLACE" directions do not affect the Table of Contents, Therefore no TOC will be issued with the updated material.TSBI -TECHNICAL SPECIFICATION BASES UNIT 1 MANUAL REMOVE MANUAL TABLE OF CONTENTS DATE: 04/14/2010 ADD MANUAL TABLE OF CONTENTS DATE: 04/27/2010 CATEGORY:

DOCUMENTS TYPE: TSBl Apr. 28, 2010 Page 2 of 2 ID: TEXT 3.4.1 ADD: REV: 4 REMOVE: REV:3 CATEGORY:

DOCUMENTS ID: TEXT 3.4.2 ADD: REV: 2 TYPE: TSB1 REMOVE: REV:1 CATEGORY:

DOCUMENTS ID: TEXT LOES ADD: REV: 98 REMOVE: REV:97 CATEGORY:

DOCUMENTS TYPE: TSB1 TYPE: TSBI ID: TEXT TOC REMOVE: REV:18 ADD: REV: 19 ANY DISCREPANCIES WITH THE MATERIAL PROVIDED, CONTACT DCS @ X3107 OR X3136 FOR ASSISTANCE.

UPDATES FOR HARDCOPY MANUALS WILL BE DISTRIBUTED WITHIN 3 DAYS IN ACCORDANCE WITH DEPARTMENT PROCEDURES.

PLEASE MAKE ALL CHANGES AND ACKNOWLEDGE COMPLETE IN YOUR NIMS INBOX UPON COMPLETION OF UPDATES. FOR ELECTRONIC MANUAL USERS, ELECTRONICALLY REVIEW THE APPROPRIATE DOCUMENTS AND ACKNOWLEDGE COMPLETE IN YOUR NIMS INBOX.

SSES MANUAL Manual Name:. TSB1 Manual Title: TECHNICAL SPECIFICATION BASES UNIT 1 MANUAL Table Of Contents Issue Date: 04/27/2010 Procedure Name Rev TEXT LOES 98 Title: LIST OF EFFECTIVE SECTIONS Issue Date 04/27/2010 Change ID Change Number TEXT TOC 19 04/27/2010 Title: TABLE OF CONTENTS TEXT 2.1.1 5 05/06/2009, Title: SAFETY LIMITS (SLS) REACTOR CORE SLS TEXT 2.1.2 1 10 / 04-/2007, Title: SAFETY LIMITS (SLS) REACTOR COOLANT<SYSTEM (RCS) PRESSURE S\ }. TEXT 3.0 3 /2 0 82-/2029 Title: LIMITING CONDITION FOR/6PERATf0N,&(LCO)

APPLICABILITY TEXT 3.1.1 1\ 04/18/2006 Title: REACTIVITY CONTROL-SYSTEMS' SHUTDOWN MARGIN (SDM)TEXT 3.1.2 0 11/15/2002 Title: REACTIVITY CONTROL SYSTEMS REACTIVITY ANOMALIES TEXT 3.1.3 Title: REACTIV-ITY CONTROL 2 SYSTEMS 01/19/2009 CONTROL ROD OPERABILITY TEXT 3.1.4 4 01/30/2009 Title: REACTIVITY CONTROL SYSTEMS CONTROL ROD SCRAM TIMES TEXT 3.1.5 1 07/06/2005 Title: REACTIVITY CONTROL SYSTEMS CONTROL ROD SCRAM ACCUMULATORS TEXT 3.1.6 2 04/18/2006 Title: REACTIVITY CONTROL SYSTEMS ROD PATTERN CONTROL Pagel of 8 Report Date: 04/27/10 Page 1 of 8 Report Date: 04/27/10 SSES MANUAL , Manual Name: TSBl Manual Title: TECHNICAL SPECIFICATION BASES UNIT 1 MANUAL TEXT 3.3.4.2 0 11/15/2002 Title: INSTRUMENTATION ANTICIPATED TRANSIENT WITHOUT SCRAM RECIRCULATION PUMP TRIP (ATWS-RPT)

INSTRUMENTATION TEXT 3.3.5.1 3 08/20/2009 Title: INSTRUMENTATION EMERGENCY CORE COOLING SYSTEM (ECCS) INSTRUMENTATION TEXT 3.3.5.2 Title: INSTRUMENTATION TEXT 3.3.6.1 Title: INSTRUMENTATION TEXT 3.3.6.2 Title: INSTRUMENTATION TEXT 3.3.7.1 Title: INSTRUMENTATION INSTRUMENTATION TEXT 3.3.8.1 Title: INSTRUMENTATION TEXT 3.3.8.2 Title: INSTRUMENTATION TEXT 3.4.1 Title: REACTOR COOLANT TEXT 3.4.2 Title: REACTOR COOLANT 0 11/15/2002 REACTOR CORE ISOLATION COOLING (RCIC) SYSTEM INSTRUMENTATION 4 04/23/2008 PRIMARY CONTAINMENT ISOLATION INSTRUMENTATION 3 10/27/2008 SECONDARY CONTAINMENT ISOLATION INSTRUMENTATION 2 10/27/2008 CONTROL ROOM EMERGENCY OUTSIDE AIR SUPPLY (CREOAS) SYSTEM 2 12/17/2007 LOSS OF POWER (LOP) INSTRUMENTATION 0 11/15/2002 REACTOR PROTECTION SYSTEM (RPS) ELECTRIC POWER MONITORING 4 04/27/2010 SYSTEM (RCS) RECIRCULATION LOOPS OPERATING 2 04/27/2010 SYSTEM (RCS) JET PUMPS 2 04/23/2008 SYSTEM RCS SAFETY RELIEF VALVES S/RVS 0 11/15/2002 SYSTEM (RCS) RCS OPERATIONAL LEAKAGE TEXT 3.4.3 Title: REACTOR TEXT 3.4.4 Title: REACTOR COOLANT COOLANT Page 3~ of 8 Report Date: 04/27/10 Page3 of 8 Report Date: 04/27/10 SSES MANUAL Manual Name: TSB1 Manual Title: TECHNICAL SPECIFICATION BASES UNIT 1 MANUAL TEXT 3.6.1.3 Title: CONTAINMENT SYSTEMS 9 04/14/2010 PRIMARY CONTAINMENT ISOLATION VALVES (PCIVS)LDCN LDCN 3092 4683 TEXT 3.6.1.4 Title: CONTAINMENT TEXT 3.6.1.5 Title: CONTAINMENT TEXT 3.6.1.6 Title: CONTAINMENT TEXT 3.6.2.1 Title: CONTAINMENT TEXT 3.6.2.2 Title: CONTAINMENT TEXT 3.6.2.3 Title: CONTAINMENT TEXT 3.6.2.4 Title: CONTAINMENT TEXT 3.6.3.1 Title: CONTAINMENT TEXT 3.6.3.2 Title: CONTAINMENT TEXT 3.6.3.3 Title: CONTAINMENT 1 04/23/2008 SYSTEMS CONTAINMENT PRESSURE 1 10/05/2005 SYSTEMS DRYWELL AIR TEMPERATURE 0 11/15/2002 SYSTEMS SUPPRESSION CHAMBER-TO-DRYWELL VACUUM BREAKERS 2 04/23/2008 SYSTEMS SUPPRESSION POOL AVERAGE TEMPERATURE 0 11/15/2002 SYSTEMS SUPPRESSION POOL WATER LEVEL 1 01/16/2006 SYSTEMS RESIDUAL HEAT REMOVAL (RHR) SUPPRESSION POOL COOLING 0 11/15/2002 SYSTEMS RESIDUAL HEAT REMOVAL (RHR) SUPPRESSION -POOL SPRAY 2 06/13/2006 SYSTEMS PRIMARY CONTAINMENT HYDROGEN RECOMBINERS 1 04/18/2005 SYSTEMS DRYWELL AIR FLOW SYSTEM 0 11/15/2002 SYSTEMS PRIMARY CONTAINMENT OXYGEN CONCENTRATION Pages of 8 Report Date: 04/27/10 Page -5 of 8 Report Date: 04/27/10 SSES MANUAL Manual Name: TSBI Manual Title: TECHNICAL SPECIFICATION BASES UNIT 1 MANUAL TEXT 3.8.2 Title: ELECTRICAL TEXT 3.8.3 Title: ELECTRICAL TEXT 3.8.4 Title: ELECTRICAL TEXT 3.8.5 Title: ELECTRICAL TEXT 3.8.6 Title: ELECTRICAL TEXT 3.8.7 Title: ELECTRICAL TEXT 3.8.8 Title: ELECTRICAL 0 POWER SYSTEMS 2 POWER SYSTEMS 11/15/2002 AC SOURCES -SHUTDOWN 04/14/2010 DIESEL FUEL OIL, LUBE OIL, AND STARTING AIR LDCN 4755 3 01/19/2009 POWER SYSTEMS DC SOURCES -OPERATING 1 12/14/2006 POWER SYSTEMS DC SOURCES -SHUTDOWN 1 12/14/2006 POWER SYSTEMS BATTERY CELL PARAMETERS 1 10/05/2005 POWER SYSTEMS DISTRIBUTION SYSTEMS -OPERATING 0 11/15/2002 POWER SYSTEMS DISTRIBUTION SYSTEMS -SHUTDOWN TEXT 3. 9.1 Title: REFUELING TEXT 3.9.2 Title: REFUELING TEXT 3.9.3 Title: REFUELING TEXT 3.9.4 Title: REFUELING TEXT 3.9.5 Title: REFUELING OPERATIONS OPERATIONS OPERATIONS OPERATIONS OPERATIONS 0 11/15/2002 REFUELING EQUIPMENT INTERLOCKS 0 11/15/2002 REFUEL POSITION ONE-ROD-OUT INTERLOCK 0 11/15/2002 CONTROL ROD POSITION 0 11/15/2002 CONTROL ROD POSITION INDICATION 0 11/15/2002 CONTROL ROD OPERABILITY

-REFUELING Pagel of 8 Report Date: 04/27/10 Page 7 of 8 Report Date: 04/27/10 TABLE OF CONTENTS (TECHNICAL SPECIFICATIONS BASES)B2.0 SA FETY LIM ITS (S Ls) ..................................................................................

B2.0-1 B2.1.1 R eactor C ore S Ls ...........................................................................

B2.0-1 B2.1.2 Reactor Coolant System (RCS) Pressure SL ...........................

TS/B2.0-7 B3.0 LIMITING CONDITION FOR OPERATION (LCO) APPLICABILITY

........ TS/B3.0-1 B3.0 SURVEILLANCE REQUIREMENT (SR) APPLICABILITY

......................

TS/B3.0-10 B3.1 REACTIVITY CONTROL SYSTEMS ....................................................

B3.1-1 B3.1.1 Shutdown Margin (SDM) ................................................................

B3.1-1 B3.1.2 R eactivity A nom alies ......................................................................

B3.1-8 B3.1.3 Control Rod OPERABILITY

............................................................

B3.1-13 B3.1.4 Control Rod Scram Times ........................................................

TS/B3.1-22 B3.1.5 Control Rod Scram Accumulators

............................................

TS/B3. 1-29 B3.1.6 Rod Pattern Control ..................................................................

TS/B3.1-34 B3.1.7 Standby Liquid Control (SLC) System ......................................

TS/B3.1-39 B3.1.8 Scram Discharge Volume (SDV) Vent and Drain Valves ..........

TS/B3.1-47 B3.2 POWER DISTRIBUTION LIMITS ...................................................

TS/B3.2-1 B3.2.1 Average Planar Linear Heat Generation Rate (APLHGR) ........ TS/B3.2-1 B3.2.2 Minimum Critical Power Ratio (MCPR) .....................................

TS/B3.2-5 B3.2.3 Linear Heat Generation Rate (LHGR) .......................................

TS/B3.2-10 B3.3 INSTRUMENTATION

.....................................................................

TS/B3.3-1 B3.3.1.1 Reactor Protection System (RPS) Instrumentation

...................

TS/B3.3-1 B3.3.1.2 Source Range Monitor (SRM) Instrumentation

.........................

TS/B3.3-35 B3.3.2.1 Control Rod Block Instrumentation

..........................................

TS/B3.3-44 B3.3.2.2 Feedwater

-Main Turbine High Water Level Trip Instrum entation ...................................................................

TS/B3.3-55 B3.3.3.1 Post Accident Monitoring (PAM) Instrumentation

.....................

TS/B3.3-64 B3.3.3.2 Remote Shutdown System .....................................................

..B3.3-76 B3.3.4.1 End of Cycle Recirculation Pump Trip (EOC-RPT)Instrum entation .........................................................................

B 3.3-81 B3.3.4.2 Anticipated Transient Without Scram Recirculation Pump Trip (ATWS-RPT)

Instrumentation

..............................

TS/B3.3-92 B3.3.5.1 Emergency Core Cooling System (ECCS)Instrum entation ...................................................................

TS/B3.3-1 01 B3.3.5.2 Reactor Core Isolation Cooling (RCIC) System Instrum entation .........................................................................

B 3.3-135 B3.3.6.1 Primary Containment Isolation Instrumentation

..............

B3.3-147 B3.3.6.2 Secondary Containment Isolation Instrumentation

...................

TS/B3.3-180 B3.3.7.1 Control Room Emergency Outside Air Supply (CREOAS)System Instrumentation

......................................................

TS/B3.3-192 (continued)

SUSQUEHANNA

-UNIT 1 TS / B TOC -1 Revision 19 TABLE OF CONTENTS (TECHNICAL SPECIFICATIONS BASES)B3.3 INSTRUMENTATION (continued)

B3.3.8.1 Loss of Power (LOP) Instrumentation

.......................................

TS/B3.3-205 B3.3.8.2 Reactor Protection System (RPS) Electric Power M o nito ring ................................................................................

B 3 .3-2 13 B3.4 REACTOR COOLANT SYSTEM (RCS) ...............................................

B3.4-1 B3.4.1 Recirculation Loops Operating

.......................................................

B3.4-1 B 3.4.2 Jet P um ps ................................................................................

T S/B 3.4-10 B3.4.3 Safety/Relief Valves (S/RVs) ....................................................

TS/B3.4-15 B3.4.4 RCS Operational LEAKAGE ..........................................................

B3.4-19 B3.4.5 RCS Pressure Isolation Valve (PIV) Leakage .................................

B3.4-24 B3.4.6 RCS Leakage Detection Instrumentation

..................................

TS/B3.4-30 B3.4.7 RCS Specific Activity ................................................................

TS/B3.4-35 B3.4.8 Residual Heat Removal (RHR) Shutdown Cooling System -Hot Shutdown ...........................................................

B3.4-39 B3.4.9 Residual Heat Removal (RHR) Shutdown Cooling System -Cold Shutdown ........................................................

B3.4-44 B3.4.10 RCS Pressure and Temperature (P/T) Limits ...........................

TS/B3.4-49 B3.4.11 Reactor Steam Dome Pressure ................................................

TS/B3.4-58 B3.5 EMERGENCY CORE COOLING SYSTEMS (ECCS) AND REACTOR CORE ISOLATION COOLING (RCIC) SYSTEM ..................................

B3.5-1 B3.5.1 ECCS -Operating

.........................................................................

B3.5-1 B3.5.2 ECCS -Shutdown .........................................................................

B3.5-19 B3.5.3 RCIC System ...........................................................................

TS/B3.5-25 B3.6 CONTAINMENT SYSTEMS ...........................................................

TS/B3.6-1 B3.6.1.1 Primary Containment

................................................................

TS/B3.6-1 B3.6.1.2 Primary Containment Air Lock ........................................................

B3.6-7 B3.6.1.3 Primary Containment Isolation Valves (PCIVs) .........................

TS/B3.6-15 B3.6.1.4 Containment Pressure ....................................................................

B3.6-41 B3.6.1.5 Drywell Air Temperature

...........................................................

TS/B3.6-44 B3.6.1.6 Suppression Chamber-to-Drywell Vacuum Breakers ................

TS/B3.6-47 B3.6.2.1 Suppression Pool Average Temperature

..................................

TS/B3.6-53 B3.6.2.2 Suppression Pool Water Level .......................................................

B3.6-59 B3.6.2.3 Residual Heat Removal (RHR) Suppression Pool C o o ling .....................................................................................

B 3 .6 -6 2 B3.6.2.4 Residual Heat Removal (RHR) Suppression Pool Spray ................

B3.6-66 B 3 .6 .3.1 N ot U sed ..................................................................................

T S /B3.6-70 B3.6.3.2 Drywell Air Flow System .................................................................

B3.6-76 B3.6.3.3 Primary Containment Oxygen Concentration

..................................

B3.6-81 B3.6.4.1 Secondary Containment

...........................................................

TS/B3.6-84 B3.6.4.2 Secondary Containment Isolation Valves (SCIVs) ....................

TS/B3.6-91 B3.6.4.3 Standby Gas Treatment (SGT) System ...................................

TS/B3.6-101 (continued)

SUSQUEHANNA

-UNIT 1 TS / B TOC -2 Revision 19 TABLE OF CONTENTS (TECHNICAL SPECIFICATIONS BASES)B3.7 PLANT SYSTEMS .........................................................................

TS/B3.7-1 B3.7.1 Residual Heat Removal Service Water (RHRSW) System and the Ultimate Heat Sink (UHS) ......................................

TS/B3.7-1 B3.7.2 Emergency Service Water (ESW) System ................................

TS/B3.7-7 B3.7.3 Control Room Emergency Outside Air Supply (CREOAS) System .............................................................

TS/B3.7-12 B3.7.4 Control Room Floor Cooling System ..................

TS/B3.7-19 B3.7.5 Main Condenser Offgas ...........................................................

TS/B3.7-24 B3.7.6 Main Turbine Bypass System ...................................................

TS/B3.7-27 B3.7.7 Spent Fuel Storage Pool Water Level ......................................

TS/B3.7-31 B3.7.8 Main Turbine Pressure Regulation System ..............................

TS/B3.7-34 B3.8 ELECTRICAL POWER SYSTEM ...................................................

TS/B3.8-1 B3.8.1 AC Sources -Operating

..........................................................

TS/B3.8-1 B3.8.2 AC Sources -Shutdown...............................................................

B3.8-38 B3.8.3 Diesel Fuel Oil, Lube Oil, and Starting Air ................................

TS/B3.8-45 B3.8.4 DC Sources -Operating

..........................................................

TS/B3.8-54 B3.8.5 DC Sources -Shutdown ..........................................................

TS/B3.8-66 B3.8.6 Battery Cell Parameters

...........................................................

TS/B3.8-71 B3.8.7 Distribution Systems -Operating

...................................................

B3.8-78 B3.8.8 Distribution Systems -Shutdown ...................................................

B3.8-86 B3.9 REFUELING OPERATIONS

..........................................................

TS/B3.9-1 B3.9.1 Refueling Equipment Interlocks

................................................

TS/B3.9-1 B3.9.2 Refuel Position One-Rod-Out Interlock

...........................................

B3.9-5 B3.9.3 C ontrol Rod Position ......................................................................

B3.9-9 B3.9.4 Control Rod Position Indication

......................................................

B3.9-12 B3.9.5 Control Rod OPERABILITY-Refueling

.........................................

B3.9-16 B3.9.6 Reactor Pressure Vessel (RPV) Water Level ...........................

TS/B3.9-19 B3.9.7 Residual Heat Removal (RHR) -High Water Level ........................

B3.9-22 B3.9.8 Residual Heat Removal (RHR) -Low Water Level .........................

B3.9-26 B3.10 SPECIAL OPERATIONS

...............................................................

TS/B3.10-1 B3.10.1 Inservice Leak and Hydrostatic Testing Operation

...................

TS/B3.10-1 B3.10.2 Reactor Mode Switch Interlock Testing ..........................................

B3.10-6 B3.10.3 Single Control Rod Withdrawal

-Hot Shutdown .............................

B3.10-11 B3.10.4 Single Control Rod Withdrawal

-Cold Shutdown ...........................

B3.10-16 B3.10.5 Single Control Rod Drive (CRD) Removal -Refueling

...................

B3.10-21 B3.10.6 Multiple Control Rod Withdrawal

-Refueling

..................................

B3.10-26 B3.10.7 Control Rod Testing -Operating

....................................................

B3.10-29 B3.10.8 SHUTDOWN MARGIN (SDM) Test -Refueling

.............................

B3.10-33 TSBI Text TOC 4/15/2010 SUSQUEHANNA

-UNIT I TS / B TOC -3 Revision 19 SUSQUEHANNA

-UNIT 1 TS / B TOC -3 Revision 19 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision TOC Table of Contents 19 B 2.0 SAFETY LIMITS BASES Page B 2.0-1 0 Page TS / B 2.0-2 3 Page TS / B 2.0-3 5 Page TS / B 2.0-4 3 Page TS / B 2.0-5 5 Page TS / B 2.0-6 1 Pages TS / B 2.0-7 through TS / B 2.0-9 1 B 3.0 LCO AND SR APPLICABILITY BASES Page TS / B 3.0-1 1 Pages TS / B 3.0-2 through TS / B 3.0-4 0 Pages TS / B 3.0-5 through TS / B 3.0-7 1 Page TS / B 3.0-8 3 Pages TS / B 3.0-9 through TS / B 3.0-11 2 Page TS / B 3.0-1 la 0 Page TS / B 3.0-12 1 Pages TS / B 3.0-13 through TS / B 3.0-15 2 Pages TS / B 3.0-16 and TS / B 3.0-17 0 B 3.1 REACTIVITY CONTROL BASES Pages B 3.1-1 through B 3.1-4 0 Page TS / B 3.1-5 1 Pages TS / B 3.1-6 and TS / B 3.1-7 2 Pages B 3.1-8 through B 3.1-13 0 Page TS / B 3.1-14 1 Page B 3.1-15 0 Page TS / B 3.1-16 1 Pages B 3.1-17 through B 3.1-19 0 Pages TS / B 3.1-20 and TS / B 3.1-21 1 Page TS / B 3.1-22 0 Page TS / B 3.1-23 1 Page TS / B 3.1-24 0 Pages TS / B 3.1-25 through TS / B 3.1-27 1 Page TS / B 3.1-28 2 Page TS / B 3.1-29 1 Pages B 3.1-30 through B 3.1-33 0 Pages TS / B 3.3-34 through TS / B 3.3-36 1 Pages TS / B 3.1-37 and TS / B 3.1-38 2 Page TS / B 3.1-39 and TS / B 3.1-40 2 Page TS / B 3.1-40a 0 Pages TS / B 3.1-41 and TS / B 3.1-42 2 SUSQUEHANNA

-UNIT 1 SUSQUEHANNA

-UNIT I TS / B LOES-1 Revision 98 TS / B LOES-1 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Page TS / B 3.1.43 1 Page TS / B 3.1-44 0 Page TS / B 3.1-45 3 Pages TS / B 3.1-46 through TS / B 3.1-49 1 Page TS / B 3.1-50 0 Page TS / B 3.1-51 3 B 3.2 POWER DISTRIBUTION LIMITS BASES Page TS / B 3.2-1 2 Pages TS / B 3.2-2 and TS / B 3.2-3 3 Pages TS / B 3.2-4 and TS / B 3.2-5 2 Page TS / B 3.2-6 3 Page B 3.2-7 1 Pages TS / B 3.2-8 and TS / B 3.2-9 3 Page TS / B 3.2.10 2 Page TS / B 3.2-11 3 Page TS / B 3.2-12 1 Page TS / B 3.2-13 2 B 3.3 INSTRUMENTATION Pages TS / B 3.3-1 through TS /B 3.3-4 1 Page TS / B 3.3-5 2 Page TS / B 3.3-6 1 Page TS / B 3.3-7 3 Page TS / B 3.3-7a 1 Page TS / B 3.3-8 4 Pages TS / B 3.3-9 through TS / B 3.3-12 3 Pages TS / B 3.3-12a 1 Pages TS / B 3.3-12b and TS / B 3.3-12c 0 Page TS / B 3.3-13 1 Page TS / B 3.3-14 3 Pages TS / B 3.3-15 and TS / B 3.3-16 1 Pages TS / B 3.3-17 and TS / B 3.3-18 4 Page TS / B 3.3-19 1 Pages TS / B 3.3-20 through TS / B 3.3-22 2 Page TS / B 3.3-22a 0 Pages TS / B 3.3-23 and TS / B 3.3-24 2 Pages TS / B 3.3-24a and TS / B 3.3-24b 0 Page TS / 8 3.3-25 3 Page TS / B 3.3-26 2 Page TS / 8 3.3-27 1 Pages TS / B 3.3-28 through TS / B 3.3-30 3 Page TS / B 3.3-30a 0 SUSQUEHANNA

-UNIT 1 TS / B LOES-2 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Page TS / B 3.3-31 4 Page TS / B 3.3-32 5 Pages TS / B 3.3-32a 0 Page TS / B 3.3-32b 1 Page TS / B 3.3-33 5 Page TS / B 3.3-33a 0 Page TS / B 3.3-34 1 Pages TS / B 3.3-35 and TS / B 3.3-36 2 Pages TS / B 3.3-37 and TS / B 3.3-38 1 Page TS / B 3.3-39 2 Pages TS / B 3.3-40 through TS / B 3.3-43 1 Page TS / B 3.3-44 4 Pages TS / B 3.3-44a and TS / B 3.3-44b 0 Page TS / B 3.3-45 3 Pages TS / B 3.3-45a and TS / B 3.3-45b 0 Page TS / B 3.3-46 3 Pages TS / B 3.3-47 2 Pages TS / B 3.3-48 through TS / B 3.3-51 3 Pages TS / B 3.3-52 and TS / B 3.3-53 2 Page TS / B 3-3-53a 0 Page TS / 8 3.3-54 4 Page TS / B 3.3-55 2 Pages TS / B 3.3-56 and TS / B 3.3-57 1 Page TS / B 3.3-58 0 Page TS / 8 3.3-59 1 Page TS / 8 3.3-60 0 Page TS / B 3.3-61 1 Pages TS / B 3.3-62 and TS / B 3.3-63 0 Pages TS / B 3.3-64 and TS / B 3.3-65 2 Page TS / B 3.3-66 4 Page TS / 8 3.3-67 3 Page TS / 8 3.3-68 4 Page TS / B 3.3-69 5 Pages TS / B 3.3-70 4 Page TS / B 3.3-71 3 Pages TS / B 3.3-72 and TS / B 3.3-73 2 Page TS / 8 3.3-74 3 Page TS / 8 3.3-75 2 Page TS / B 3.3-75a 6 Page TS / B 3.3-75b 7 Page TS / B 3.3-75c 5 SUSQUEHANNA

-UNIT 1 TS / B LOES-3 Revision 98 SUSQUEHANNA

-UNIT 1 TS / B LOES-3 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Pages B 3.3-76 through 3.3-77 0 Page TS / B 3.3-78 1 Pages B 3.3-79 through B 3.3-81 0 Page B 3.3-82 1 Page B 3.3-83 0 Pages B 3.3-84 and B 3.3-85 1 Page B 3.3-86 0 Page B 3.3-87 1 Page B 3.3-88 0 Page B 3.3-89 1 Page TS / B 3.3-90 1 Page B 3.3-91 0 Pages TS / B 3.3-92 through TS / B 3.3-100 1 Pages TS / B 3.3-101 through TS / B 3.3-103 0 Page TS / B 3.3-104 2 Pages TS / B 3.3-105 and TS / B 3.3-106 0 Page TS / B 3.3-107 1 Page TS / B 3.3-108 0 Page TS / B 3.3-109 1 Pages TS / B 3.3-110 and TS / B 3.3-111 0 Pages TS / B 3.3-112 and TS / B 3.3-112a 1 Pages TS / B 3.3-113 through TS / B 3.3-115 1 Page TS / B 3.3-116 3 Page TS / B 3.3-117 1 Pages TS / B 3.3-118 through TS / B 3.3-122 0 Pages TS / B 3.3-123 and TS / B 3.3-124 1 Page TS / B 3.3-124a 0 Page TS / B 3.3-125 0 Pages TS / B 3.3-126 and TS / B 3.3-127 1 Pages TS / B 3.3-128 through TS/ B 3.3-130 0 Page TS / B 3.3-131 1 Pages TS / B 3.3-132 through TS / B 3.3-134 0 Pages B 3.3-135 through B 3.3-137 0 Page TS / B 3.3-138 1 Pages B 3.3-139 through B 3.3-149 0 Pages TS / B 3.3-150 and TS / B 3.3-151 1 Pages TS / B 3.3-152 through TS / B 3.3-154 2 Page TS / B 3.3-155 1 Pages TS / B 3.3-156 through TS / B 3.3-158 2 Pages TS / B 3.3-159 through TS / B 3.3-162 1 Page TS / B 3.3-163 2 Pages TS / B 3.3-164 and TS / B 3.3-165 1 Pages TS / B 3.3-166 and TS / B 3.3-167 2 SUSQUEHANNA

-UNIT 1 TS / B LOES-4 Revision 98 SUSQUEHANNA

-UNIT 1 TS / B LOES-4 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Pages TS / B 3.3-168 and TS / B 3.3-169 1 Page TS / B 3.3-170 2 Pages TS / B 3.3-171 through TS / B 3.3-177 1 Pages TS / B 3.3-178 through TS / B 3.3-179a 2 Pages TS / B 3.3-179b and TS / B 3.3-179c 0 Page TS / B 3.3-180 1 Page TS / B 3.3-181 3 Page TS / B 3.3-182 1 Page TS / B 3.3-183 2 Page TS / B 3.3-184 1 Page TS / B 3.3-185 3 Page TS / B 3.3-186 1 Pages TS / B 3.3-187 and TS / B 3.3-188 2 Pages TS / B 3.3-189 through TS / B 3.3-191 1 Page TS / B 3.3-192 0 Page TS / B 3.3-193 1 Pages TS / B 3.3-194 and TS / B 3.3-195 0 Page TS / B 3.3-196 2 Pages TS / B 3.3-197 through TS / B 3.3-204 0 Page TS / B 3.3-205 1 Pages B 3.3-206 through B 3.3-209 0 Page TS / B 3.3-210 1 Pages B 3.3-211 through B 3.3-219 0 B 3.4 REACTOR COOLANT SYSTEM BASES Pages B 3.4-1 and B 3.4-2 0 Pages TS / B 3.4-3 and Page TS / B 3.4-4 4 Page TS / B 3.4-5 3 Pages TS / B 3.4-6 throigh TS / B 3.4-9 2 Page TS / B 3.4-10 1 Pages TS / 3.4-11 and TS / B 3.4-12 0 Page TS / B 3.4-13 1 Page TS / B 3.4-14 0 Page TS / B 3.4-15 2 Pages TS / B 3.4-16 and TS / B 3.4-17 3 Page TS / B 3.4-18 2 Pages B 3.4-19 through B 3.4-27 0 Pages TS / B 3.4-28 and TS / B 3.4-29 1 Pages TS / B 3.4-30 and TS / B 3.4-31 0 Pages TS / B 3.4-32 and TS / B 3.4-33 1 Page TS / B 3.4-34 0 Pages TS / B 3.4-35 and TS / B 3.4-36 1 Page TS / B 3.4-37 2 Page TS / B 3.4-38 1 SUSQUEHANNA

-UNIT 1 TS I B LOES-5 Revision 98 SUSQUEHANNA

-UNIT 1 TS / B LOES-5 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Pages B 3.4-39 and B 3.4-40 0 Page TS / B 3.4-41 1 Pages B 3.4-42 through B 3.4-48 0 Page TS / B 3.4-49 3 Page TS / B 3.4-50 1 Page TS / B 3.4-51 3 Page TS / B 3.4-52 2 Page TS / B 3.4-53 1 Pages TS / B 3.4-54 through TS / B 3.4-56 2 Page TS / B 3.4-57 3 Pages TS / B 3.4-58 through TS / B 3.4-60 1 B 3.5 ECCS AND RCIC BASES Pages B 3.5-1 and B 3.5-2 0 Page TS / B 3.5-3 2 Page TS / B 3.5-4 1 Page TS / B 3.5-5 2 Page TS / B 3.5-6 1 Pages B 3.5-7 through B 3.5-10 0 Page TS / B 3.5-11 1 Page TS / B 3.5-12 0 Page TS / B 3.5-13 1 Pages TS / B 3.5-14 and TS / B 3.5-15 0 Pages TS / B 3.5-16 through TS / B 3.5-18 1 Pages B 3.5-19 through B 3.5-24 0 Page TS / B 3.5-25 1 Pages TS / B 3.5-26 and TS / B 3.5-27 1 Pages B 3.5-28 through B 3.5-31 0 B 3.6 CONTAINMENT SYSTEMS BASES Page TS / B 3.6-1 2 Page TS / B 3.6-1a 3 Page TS / B 3.6-2 4 Page TS / B 3.6-3 3 Page TS / B 3.6-4 4 Pages TS / B 3.6-5 and TS / B 3.6-6 3 Pages TS / B 3.6-6a and TS / B 3.6-6b 2 Page TS / B 3.6-6c 0 Pages B 3.6-7 0 Page B 3.6-8 1 Pages B 3.6-9 through B 3.6-14 0 Page.TS / B 3.6-15 2 Page TS / B 3.6-15a 0 Page TS / B 3.6-15b 2 SUSQUEHANNA

-UNIT 1 TS / B LOES-6 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Pages TS / B 3.6-16 and TS I B 3.6-17 1 Page TS / B 3.6-17a 0 Pages TS / B 3.6-18 and TS / B 3.6-19 0 Page TS / B 3.6-20 1 Page TS / B 3.6-21 2 Page TS / B 3.6-22 1 Page TS / B 3.6-22a 0 Page TS / B 3.6-23 1 Pages TS / B 3.6-24 and TS / B 3.6-25 0 Pages TS / B 3.6-26 and TS / B 3.6-27 2 Page TS / B 3.6-28 7 Page TS / B 3.6-29 2 Page TS / B 3.6-30 1 Page TS / B 3.6-31 3, Pages TS / B 3.6-32 and TS / B 3.6-33 1 Pages TS / B 3.6-34 and TS / B 3.6-35 0 Page TS / B 3.6-36 1 Page TS / B 3.6-37 0 Page TS / B 3.6-38 3 Page TS / B 3.6-39 2 Page TS / B 3.6-40 6 Page B 3.6-41 1 Pages B 3.6-42 and B 3.6-43 3 Pages TS / B 3.6-44 and TS / B 3.6-45 1 Page TS / B 3.6-46 2 Pages TS / B 3.6-47 through TS / B 3.6-51 1 Page TS / B 3.6-52 2 Pages TS / B 3.6-53 through TS / B 3.6-56 0 Page TS / B 3.6-57 1 Page TS / 3.6-58 2 Pages B 3.6-59 through B 3.6-63 0 Pages TS / B 3.6-64 and TS / B 3.6-65 1 Pages B 3.6-66 through B 3.6-69 0 Pages TS I B 3.6-70 through TS / B 3.6-72 1 Page TS / B 3.6-73 2 Pages TS / B 3.6-74 and TS / B 3.6-75 1 Pages B 3.6-76 and B 3.6-77 0 Page TS / B 3.6-78 1 Pages B 3.6-79 through B 3.3.6-83 0 Page TS / B 3.6-84 3 Page TS / B 3.6-85 2 Page TS / B 3.6-86 4 SUSQUEHANNA

-UNIT 1 TSIBLOES-7 Revision 98 SUSQUEHANNA

-UNIT 1 TS / B LOES-7 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision Pages TS / B 3.6-87 through TS / B 3.6-88a 2 Page TS / B 3.6-89 4 Page TS / B 3.6-90 2 Page TS / B 3.6-91 3 Pages TS / B 3.6-92 through TS / B 3.6-96 1 Page TS / B 3.6-97 2 Pages TS / B 3.6-98 and TS / B 3.6-99 1 Page TS / B 3.6-100 3 Page TS / B 3.6-100a 0 Pages TS / B 3.6-101 and TS / B 3.6-102 1 Pages TS / B 3.6-103 and TS / B 3.6-104 2 Page TS / B 3.6-105 3 Page TS / B 3.6-106 2 Page TS / B 3.6-107 3 B 3.7 PLANT SYSTEMS BASES Pages TS / B 3.7-1 3 Page TS / B 3.7-2 4 Pages TS / B 3.7-3 through TS / B 3.7-5 3 Page TS / B 3.7-5a 1 Page TS / B 3.7-6 3 Page TS / B 3.7-6a 2 Page TS / B 3.7-6b 1 Page TS / B 3.7-6c 2 Page TS / B 3.7-7 3 Page TS / B 3.7-8 2 Pages TS / B 3.7-9 through TS / B 3.7-11 1 Pages TS / B 3.7-12 and TS / B 3.7-13 2 Pages TS / B 3.7-14 through TS / B 3.7-18 3 Page TS / B 3.7-18a 1 Pages TS / B 3.7-18b through TS / B 3.7-18e 0 Pages TS / B 3.7-19 through TS I B 3.7-23 1 Page TS / B 3.7-24 1 Pages TS / B 3.7-25 and TS / B 3.7-26 0 Pages TS / B 3.7-27 through TS / B 3.7-29 5 Page TS / B 3.7-30 2 Page TS / B 3.7-31 1 Page TS / B 3.7-32 0 Page TS / B 3.7-33 1 Pages TS / B 3.7-34 through TS I B 3.7-37 0 SUSQUEHANNA

-UNIT I TS I B LOES-8 Revision 98 SUSQUEHANNA

-UNIT 1 TS / B LOES-8 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision B 3.8 ELECTRICAL POWER SYSTEMS BASES Page TS / B 3.8-1 3 Pages TS / B 3.8-2 and TS / B 3.8-3 2 Page TS / B 3.8-4 3 Pages TS / B 3.8-4a and TS / B 3.8-4b 0 Page TS / B 3.8-5 5 Page TS / B 3.8-6 3 Pages TS / B 3.8-7 through TS/B 3.8-8 2 Page TS / B 3.8-9 4 Page TS / B 3.8-10 3 Pages TS / B 3.8-11 and TS / B 3.8-17 2 Page TS / B 3.8-18 3 Pages TS / B 3.8-19 through TS / B 3.8-21 2 Pages TS / B 3.8-22 and TS / B 3.8-23 3 Pages TS / B 3.8-24 through TS / B 3.8-37 2 Pages B 3.8-38 through B 3.8-44 0 Page TS / B 3.8-45 1 Pages TS / B 3.8-46 through TS / B 3.8-48 0 Pages TS / B 3.8-49 through TS / B 3.8-51 1 Page TS / B 3.8-52 0 Page TS / B 3.8-53 1 Pages TS / B 3.8-54 through TS / B 3.8-57 2 Pages TS / B 3.8-58 through TS / B 3.8-61 3 Pages TS / B 3.8-62 and TS / B 3.8-63 5 Page TS / B 3.8-64 4 Page TS / B 3.8-65 5 Pages TS / B 3.8-66 through TS / B 3.8-77 1 Pages TS / B 3.8-77A through TS / B 3.8-77C 0 Pages B 3.8-78 through B 3.8-80 0 Page TS / B 3.8-81 1 Pages B 3.8-82 through B 3.8-90 0 B 3.9 REFUELING OPERATIONS BASES Pages TS / B 3.9-1 and TS / B 3.9-1a 1 Pages TS / B 3.9-2 through TS / B 3.9-4 1 Pages B 3.9-5 through B 3.9-18 0 Pages TS / B 3.9-19 through TS I B 3.9-21 1 Pages B 3.9-22 through B 3.9-30 0 SUSQUEHANNA

-UNIT 1 TS / B LOES-9 Revision 98 SUSQUEHANNA

-UNIT 1 TS / B LOES-9 Revision 98 SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL SPECIFICATIONS BASES)Section Title Revision B 3.10 SPECIAL OPERATIONS BASES Page TS / B 3.10-1 2 Pages TS / B 3.10-2 through TS / B 3.10-5 1 Pages B 3.10-6 through B 3.10-31 0 Page TS / B 3.10-32 2 Page B 3.10-33 0 Page TS / B 3.10-34 1 Pages B 3.10-35 and B 3.10-36 0 Page TS / B 3.10-37 1 Page TS / B 3.10-38 2 TSB1 Text LOES.doc 4/15/2010 SUSQUEHANNA

-UNIT 1 TS / B LOES-10 Revision 98 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 B 3.4 B 3.4.1 REACTOR COOLANT SYSTEM (RCS)Recirculation Loops Operating BASES BACKGROUND The Reactor Coolant Recirculation System is designed to provide a forced coolant flow through the core to remove heat from the fuel. The forced coolant flow removes more heat from the fuel than would be possible with just natural circulation.

The forced flow, therefore, allows operation at significantly higher power than would otherwise be possible.

The recirculation system also controls reactivity over a wide span of reactor power by varying the recirculation flow rate to control the void content of the moderator.

The Reactor Coolant Recirculation System consists of two recirculation pump loops external to the reactor vessel. These loops provide the piping path for the driving flow of water to the reactor vessel jet pumps. Each external loop contains one variable speed motor driven recirculation pump, a motor generator (MG) set to control pump speed and associated piping, jet pumps, valves, and instrumentation.

The recirculation pump, piping, and valves are part of the reactor coolant pressure boundary and are located inside the drywell structure.

The jet pumps are reactor vessel internals.

The recirculated coolant consists of saturated water from the steam separators and dryers that has been subcooled by incoming feedwater.

This water passes down the annulus between the reactor vessel wall and the core shroud. A portion of the coolant flows from the vessel, through the two external recirculation loops, and becomes the driving flow for the jet pumps. Each of the two external recirculation loops discharges high pressure flow into an external manifold, from which individual recirculation inlet lines are routed to the jet pump risers within the reactor vessel. The remaining portion of the coolant mixture in the annulus becomes the suction flow for the jet pumps. This flow enters the jet pump at suction inlets and is accelerated by the driving flow. The drive flow and suction flow are mixed in the jet pump throat section. The total flow then passes through the jet pump diffuser section into the area below the core (lower plenum), gaining sufficient head in the process to drive the required flow upward through the core. The subcooled water enters the bottom of the fuel channels and contacts the fuel cladding, where heat (continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-1 Revision 0 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 BASES BACKGROUND (continued) is transferred to the coolant. As it rises, the coolant begins to boil, creating steam voids within the fuel channel that continue until the coolant exits the core. Because of reduced moderation, the steam voiding introduces negative reactivity that must be compensated for to maintain or to increase reactor power. The recirculation flow control allows operators to increase recirculation flow and sweep some of the voids from the fuel channel, overcoming the negative reactivity void effect. Thus, the reason for having variable recirculation flow is to compensate for reactivity effects of boiling over a wide range of power generation without having to move control rods and disturb desirable flux patterns.Each recirculation loop is manually started from the control room. The MG set provides regulation of individual recirculation loop drive flows. The flow in each loop is manually controlled.

APPLICABLE SAFETY ANALYSES The operation of the Reactor Coolant Recirculation System is an initial condition assumed in the design basis loss of coolant accident (LOCA)(Ref. 1). During a LOCA caused by a recirculation loop pipe break, the intact loop is assumed to provide coolant flow during the first few seconds of the accident.

The initial core flow decrease is rapid because the recirculation pump in the broken loop ceases to pump reactor coolant to the vessel almost immediately.

The pump in the intact loop coasts down relatively slowly. This pump coastdown governs the core flow response for the next several seconds until the jet pump suction is uncovered (Ref. 1). The analyses assume that both loops are operating at the same flow prior to the accident.

However, the LOCA analysis was reviewed for the case with a flow mismatch between the two loops, with the pipe break assumed to be in the loop with the higher flow. While the flow coastdown and core response are potentially more severe in this assumed case (since the intact loop starts at a lower flow rate and the core response is the same as if both loops were operating at a lower flow rate), a small mismatch has been determined to be acceptable based on engineering judgment.

The recirculation system is also assumed to have sufficient flow coastdown characteristics to maintain fuel thermal margins during abnormal operational transients (Ref. 2), which are analyzed in Chapter 15 of the FSAR.(continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-2 Revision 0 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 BASES APPLICABLE Plant specific LOCA analyses have been performed assuming only one SAFETY operating recirculation loop. These analyses have demonstrated that, in ANALYSES the event of a LOCA caused by a pipe break in the operating recirculation (continued) loop, the Emergency Core Cooling System response will provide adequate core cooling, provided that the APLHGR limit for SPC ATRIUMTM-10 fuel is modified.The transient analyses of Chapter 15 of the FSAR have also been performed for single recirculation loop operation and demonstrate sufficient flow coastdown characteristics to maintain fuel thermal margins during the abnormal operational transients analyzed provided the MCPR requirements are modified.

During single recirculation loop operation, modification to the Reactor Protection System (RPS) average power range monitor (APRM) instrument setpoints is also required to account for the different relationships between recirculation drive flow and reactor core flow. The APLHGR, LHGR, and MCPR limits for single loop operation are specified in the COLR. The APRM Simulated Thermal Power-High setpoint is in LCO 3.3.1.1, "Reactor Protection System (RPS)Instrumentation." In addition, a restriction on recirculation pump speed is incorporated to address reactor vessel internals vibration concerns and assumptions in the event analysis.Recirculation loops operating satisfies Criterion 2 of the NRC Policy Statement (Ref. 5).LCO Two recirculation loops are required to be in operation with their flows matched within the limits specified in SR 3.4.1.1 to ensure that during a LOCA caused by a break of the piping of one recirculation loop the assumptions of the LOCA analysis are satisfied.

With the limits specified in SR 3.4.1.1 not met, the recirculation loop with the lower flow must be considered not in operation.

With only one recirculation loop in operation, modifications to the required APLGHR limits (LCO 3.2.1, "AVERAGE PLANAR LINEAR HEAT GENERATION RATE"), LHGR limits (LCO 3.2.3,"LINEAR HEAT GENERATION RATE (LHGR)"), MCPR limits (LCO 3.2.2,"MINIMUM CRITICAL POWER RATIO (MCPR)"), and APRM Simulated Thermal Power-High setpoint (LCO 3.3.1.1) may be applied to allow continued operation consistent with the safety analysis assumptions.

Furthermore, restrictions are placed on recirculation pump speed to ensure the initial assumption of the event analysis are maintained.(continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-3 Revision 4 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 BASES LCO (continued)

The LCO is modified by a Note that allows up to 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> to establish the required limits and setpoints after a change from two recirculation loops operation to single recirculation loop operation.

If the limits and setpoints are not in compliance with the applicable requirements at the end of this period, the ACTIONS required by the applicable specifications must be implemented.

This time is provided to stabilize operation with one recirculation loop by: limiting flow in the operating loop, limiting total THERMAL POWER, monitor APRM and local power range monitor (LPRM) neutron flux noise levels; and, fully implementing and confirming the required limit and setpoint modifications.

APPLICABILITY In MODES 1 and 2, requirements for operation of the Reactor Coolant Recirculation System are necessary since there is considerable energy in the reactor core and the limiting design basis transients and accidents are assumed to occur.In MODES 3, 4, and 5, the consequences of an accident are reduced and the coastdown characteristics of the recirculation loops are not important.

ACTIONS A. 1 When operating with no recirculation loops operating in MODE 1, the potential for thermal-hydraulic oscillations is greatly increased.

Although this transient is protected for expected modes of oscillation by the OPRM system, when OPERABLE per LCO 3.3.1.1, Function 2.f (Reference 3, 4), the prudent response to the natural circulation condition is to preclude potential thermal-hydraulic oscillations by immediately placing the mode switch in the shutdown position.B.1 Recirculation loop flow must match within required limits when both recirculation loops are in operation.

If flow mismatch is not within required limits, matched flow must be restored within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />. If matched flows are not restored, the recirculation loop with lower flow must be declared "not in operation." Should a LOCA occur with recirculation loop flow not matched, the core flow coastdown and resultant core response may not be bounded by the LOCA analyses.

Therefore, only a limited time is allowed prior to imposing restrictions associated with single loop operation.

Operation with only one recirculation loop satisfies the requirements of the LCO and the initial conditions of the accident sequence.(continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-4 Revision 4 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 BASES ACTIONS The 2 hour2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> Completion Time is based on the low probability of an accident (continued) occurring during this time period, providing a reasonable time to complete the Required Action, and considering that frequent core monitoring by operators allows abrupt changes .in core flow conditions to be quickly detected.These Required Actions do not require tripping the recirculation pump in the lowest flow loop when the mismatch between total jet pump flows of the two loops is greater than the required limits. However, in cases where large flow mismatches occur, low flow or reverse flow can occur in the low flow loop jet pumps, causing vibration of the jet pumps. If zero or reverse flow is detected, the condition should be alleviated by changing recirculation pump speed to re-establish forward flow or by tripping the pump. Additional recirculation loop flow rate restrictions during single loop operation are provided in TRM Section 3.4.6.C.__With no recirculation loops in operation while in MODE 2 or if after going to single loop operations the required limits and setpoints cannot be established, the plant must be brought to MODE 3, where the LCO does not apply within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />. In this condition, the recirculation loops are not required to be operating because of the reduced severity of DBAs and minimal dependence on the recirculation loop coastdown characteristics.

The allowed Completion Time of 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> is reasonable to reach MODE 3 from full power conditions in an orderly manner without challenging plant systems.SURVEILLANCE SR 3.4.1.1 REQUIREMENTS This SR ensures the recirculation loops are within the allowable limits for mismatch.

At low core flow (i.e., < 75 million Ibm/hr), the MCPR requirements provide larger margins to the fuel cladding integrity Safety Limit such that the potential adverse effect of early boiling transition during a LOCA is reduced. A larger flow mismatch can therefore be allowed when core flow is < 75 million Ibm/hr. The recirculation loop jet pump flow, as used in this Surveillance, is the summation of the flows from all of the jet pumps associated with a single recirculation loop.(continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-5 Revision 3 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 BASES SURVEILLANCE SR 3.4.1.1 (continued)

REQUIREMENTS The mismatch is measured in terms of core flow. If the flow mismatch exceeds the specified limits, the loop with the lower flow is considered inoperable.

The SR is not required when both loops are not in operation since the mismatch limits are meaningless during single loop or natural circulation operation.

The Surveillance must be performed within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> after both loops are in operation.

The 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Frequency is consistent with the Surveillance Frequency for jet pump OPERABILITY verification and has been shown by operating experience to be adequate to detect off normal jet pump loop flows in a timely manner.SR 3.4.1.2 As noted, this SR is only applicable when in single loop operation.

This SR ensures the recirculation pump limit is maintained.

The 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Frequency is based on operating experience and the operators inherent knowledge of the current reactor status.REFERENCES

1. FSAR, Section 6.3.3.7.2. FSAR, Section 5.4.1.4.3. GE NEDO-31960-A "BWROG Long Term Stability Solutions Licensing Methodology," November 1995.4. GE NEDO-31960-A "BWROG Long Term Stability Solutions Licensing Methodology, Supplement 1," November 1995.5. Final Policy Statement on Technical Specifications Improvements, July 22, 1993 (58 FR 39132).SUSQUEHANNA

-UNIT 1 TS / B 3.4-6 Revision 2 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 THIS PAGE INTENTIONALLY LEFT BLANK SUSQUEHANNA

-UNIT 1 TS / B 3.4-7 Revision 2 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 THIS PAGE INTENTIONALLY LEFT BLANK SUSQUEHANNA

-UNIT 1 TS / B 3.4-8 Revision 2 PPL Rev. 4 Recirculation Loops Operating B 3.4.1 THIS PAGE INTENTIONALLY LEFT BLANK SUSQUEHANNA

-UNIT 1 TS / B 3.4-9 Revision 2 PPL Rev. 2 Jet Pumps B 3.4.2 B 3.4 REACTOR COOLANT SYSTEM (RCS)B 3.4.2 Jet Pumps BASES BACKGROUND The Reactor Coolant Recirculation System is described in the Background section of the Bases for LCO 3.4.1, "Recirculation Loops Operating," which discusses the operating characteristics of the system and how these characteristics affect the Design Basis Accident (DBA) analyses.The jet pumps are part of the Reactor Coolant Recirculation System and are designed to provide forced circulation through the core to remove heat from the fuel. The jet pumps are located in the annular region between the core shroud and the vessel inner wall. Because the jet pump suction elevation is at two-thirds core height, the vessel can be reflooded and coolant level maintained at two-thirds core height even with the complete break of the recirculation loop pipe that is located below the jet pump suction elevation.

Each reactor coolant recirculation loop contains ten jet pumps.Recirculated coolant passes down the annulus between the reactor vessel wall and the core shroud. A portion of the coolant flows from the vessel, through the two external recirculation loops, and becomes the driving flow for the jet pumps. Each of the two external recirculation loops discharges high pressure flow into an external manifold from which individual recirculation inlet lines are routed to the jet pump risers within the reactor vessel. The remaining portion of the coolant mixture in the annulus becomes the suction flow for the jet pumps. This flow enters the jet pump at suction inlets and is accelerated by the drive flow. The drive flow and suction flow are mixed in the jet pump throat section. The total flow then passes through the jet pump diffuser section into the area below the core (lower plenum), gaining sufficient head in the process to drive the required flow upward through the core.TRM Section 3.4.6 provides discussion of single loop operation flow rate requirements to address jet pump structural concerns during this mode of operation.

APPLICABLE Jet pump OPERABILITY is an explicit assumption in the design basis loss SAFETY of coolant accident (LOCA) analysis evaluated in Reference 1.ANALYSES (continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-10 Revision I PPL Rev. 2 Jet Pumps B 3.4.2 BASES APPLICABLE SAFETY ANALYSES (continued)

The capability of reflooding the core to two-thirds core height is dependent upon the structural integrity of the jet pumps. If the structural system, including the beam holding a jet pump in place, fails, jet pump displacement and performance degradation could occur, resulting in an increased flow area through the jet pump and a lower core flooding elevation.

This could adversely affect the water level in the core during the reflood phase of a LOCA as well as the assumed blowdown flow during a LOCA.Jet pumps satisfy Criterion 2 of the NRC Policy Statement (Ref. 4).LCO The structural failure of any of the jet pumps could cause significant degradation in the ability of the jet pumps to allow reflooding to two-thirds core height during a LOCA. OPERABILITY of all jet pumps is required to ensure that operation of the Reactor Coolant Recirculation System will be consistent with the assumptions used in the licensing basis analysis (Ref. 1).APPLICABILITY In MODES 1 and 2, the jet pumps are required to be OPERABLE since there is a large amount of energy in the reactor core and since the limiting DBAs are assumed to occur in these MODES. This is consistent with the requirements for operation of the Reactor Coolant Recirculation System (LCO 3.4.1).In MODES 3, 4, and 5, the Reactor Coolant Recirculation System is not required to be in operation, and when not in operation, sufficient flow is not available to evaluate jet pump OPERABILITY.

ACTIONS A. 1 An inoperable jet pump can increase the blowdown area and reduce the capability of reflooding during a design basis LOCA. If one or more of the jet pumps are inoperable, the (continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-11 Revision 0 PPL Rev. 2 Jet Pumps B 3.4.2 BASES ACTIONS A.1 (continued) plant must be brought to a MODE in which the LCO does not apply. To achieve this status, the plant must be brought to MODE 3 within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />.The Completion Time of 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> is reasonable, based on operating experience, to reach MODE 3 from full power conditions in an orderly manner and without challenging plant systems.SURVEILLANCE REQUIREMENTS This SR is designed to detect significant degradation in jet pump performance that precedes jet pump failure (Ref. 2). This SR is required to be Oerformed only when the loop has forced recirculation flow since surveillance checks and measurements can only be performed during jet pump operation.

With no forced recirculation flow, stresses on jet pump assemblies are significantly reduced. The jet pump failure of concern is a complete mixer displacement due to jet pump beam failure. Jet pump plugging is also of concern since it adds flow resistance to the recirculation loop. Significant degradation is indicated if the specified criteria confirm unacceptable deviations from established patterns or relationships.

The allowable deviations from the established patterns have been developed based on the variations experienced at plants during normal operation and with jet pump assembly failures (Refs. 2 and 3). Each recirculation loop must satisfy two of the performance criteria provided.

Since refueling activities (fuel assembly replacement or shuffle, as well as any modifications to fuel support orifice size or core plate bypass flow) can affect the relationship between core flow, jet pump flow, and recirculation loop flow, these relationships may need to be re-established each cycle. Similarly, initial entry into extended single loop operation may also require establishment of these relationships.

During the initial weeks of operation under such conditions, while base-lining new"established patterns," engineering judgment of the daily surveillance results is used to detect significant abnormalities, which could indicate a jet pump failure.The recirculation pump speed operating characteristics (loop (continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-12 Revision 0 PPL Rev. 2 Jet Pumps B 3.4.2 BASES SURVEILLANCE SR 3.4.2.1 (continued)

REQUIREMENTS drive flow versus pump speed) are determined by the flow resistance from the loop suction through the jet pump nozzles. A change in the relationship indicates a plug, flow restriction, loss in pump hydraulic performance, leakage, or new flow path between the recirculation pump discharge and jet pump nozzle. For this criterion, loop drive flow versus pump speed relationship must be verified.Individual jet pumps in a recirculation loop normally do not have the same flow. The unequal flow is due to the drive flow manifold, which does not distribute flow equally to all risers. The flow (or jet pump diffuser to lower plenum differential pressure) pattern or relationship of one jet pump to the loop average is repeatable.

An appreciable change in this relationship is an indication that increased (or reduced) resistance has occurred in one of the jet pumps. This may be indicated by an increase in the relative flow for a jet pump that has experienced beam cracks.The deviations from normal are considered indicative of a potential problem in the recirculation drive flow of jet pump system (Ref. 2). Normal flow ranges and established jet pump flow and differential pressure patterns are established by plotting historical data as discussed in Reference 2.The 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Frequency has been shown by operating experience to be timely for detecting jet pump degradation and is consistent with the Surveillance Frequency for recirculation loop OPERABILITY verification.

This SR is modified by two Notes. If this SR has not been performed in the previous 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> at the time an idle recirculation loop is restored to service, Note 1 allows 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> after the idle recirculation loop is in operation before the SR must be completed because these checks can only be performed during jet pump operation.

The 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> is an acceptable time to establish conditions and complete data collection and evaluation.

Note 2 allows deferring completion of this SR until 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> after THERMAL POWER is greater than 23% of RTP. During low flow conditions, jet pump noise approaches the threshold (continued)

SUSQUEHANNA

-UNIT 1 TS / B 3.4-13 Revision 1 PPL Rev. 2 Jet Pumps B 3.4.2 BASES SURVEILLANCE REQUIREMENTS SR 3.4.2.1 (continued) response of the associated flow instrumentation and precludes the collection of repeatable and meaningful data.REFERENCES

1. FSAR, Section 6.3.2. GE Service Information Letter No. 330, June 9, 1990.3. NUREG/CR-3052, November 1984.4. Final Policy Statement on Technical Specifications Improvements, July 22, 1993 (58 FR 39132).SUSQUEHANNA

-UNIT 1 TS / B 3.4-14 Revision 0