ML17345A724

Rev 15 to Topical QA Rept.

ML17345A724
Person / Time
Site:	Saint Lucie, Turkey Point, 05000000
Issue date:	06/09/1989
From:	FLORIDA POWER & LIGHT CO.
To:
Shared Package
ML17345A723	List: ML17345A722 ML17345A724
References
NUDOCS 8906190151
Download: ML17345A724 (619)

Text

{{#Wiki_filter:ENCLOSURE ZZ TOPZCAL REPORT (REVZSZON 15)890619015k 8906i2 PDR ADOCK 05000250 PDC. TOPICAL QUALITy ASSURANCE REPORT Rev.4 Date June 24, 1989 Page 1<<1 Florida Power 6 Light Company (FPL)has established and implemented a Quality Assurance Program to provide assurance that the design, procurement, modification and operation of nuclear power plants conform with applicable regulatory requirements. The FPL'Quality Assurance Program described in this Topical Report is in compliance with the requirements of Appendix B to 10 CFR Part 50.The FPL Quality Assurance Program meets the requirements provided by the NRC Regulatory Guidance and Industry Standards as listed in Appendix C of this Topical Quality Assurance Report.ID CO CII C 0 2 Cl Ol E 0 U

TOPICAL QUALITY ASSURANCE REPORT TABLE OP CONTENTS Rev.Date June 9, 1989 Page 1 of 2 REVISION NUMBER C/N'DATE Title Page Abstract NRC Staff Evaluation Letter Table of Contents Policy Statement Introduction 15 16 10 June 9, June 24, October 19, June 9, June 24, June 24, 1989 1988 1988 1988 1988 1988 Topical Quality Requirements TQR 1.0 Organization TQR 2.0 Quality Assurance Program TQR 3.0 Design Control TQR 4.0 Procurement Document Control TQR 5.0 Instruction, Procedures &Drawings TQR 6.0 Document Control TQR 7.0 Control, of Purchased Items&Services TQR 8.0 Identification &Control of Materials, Parts&Components TQR 9.0 Control of Special Processes TQR 10.0 Inspection TQR 11.0 Test Control TQR 12.0 Control of Measuring&Test Equipment TQR 13.0 Handling, Storage'Shipping TQR 14.0 Inspection, Test&Operating Status TQR 15.0 Nonconforming Materials, Parts or Components 14 8 3 32 October June October June October October June June October May June June June June October 27, 1988 24, 1988 27, 1988 24, 1988 27, 1988 27, 1988 24, 1988 10, 1986 27, 1988 10, 1988 10, 1986 10, 1985 24, 1988 10, 1986 27, 1988 II TQR 16.0 Corrective Action TQR 17.0 Quality Assurance Records TQR 18.0 Audits June 10, 1986 June 10, 1986 June 10, 1986 0 C 0 Z Ol~v CV 6 0 4. TOPICAL QUALITY ASSURANCE REPORT TABLE OF CONTENTS Rev 16 Date June 9, Page 2 of 2 REVISION NUMBER'/N~DATE Appendices A-Organizations &Figures Figure 1-1: Organization of Departments Affecting Quality Figure 1-2: Turkey Point Nuclear Site Organization Figure 1-3: St.Lucie Nuclear Site Organization B-Qualification &Experience Requirements for Quality Assurance Personnel C-Baseline Document Matrix D-Cancelled E-List of Corporate Quality Assurance Procedures (QPs)F-Topics to be Addressed in Safety Analysis Reports 15 7 June 9, 1989 June 9, 1989 June 9, 1989 June 10, 1986 June 10, 1984 May 7, October 27, 19 8 May 7, 1982 ID Ol 0 D C I a Z Ol Ol E 0 4. TOPICAL QUALITY ASSURANCE REPORT QUALITY ASSURANCE PROGRAM POLICY Rev.oa e June 24, 1988 Page I of NEED FOR POLICY To avoid undue risk to the health and safety of the public and company employees, it is necessary to design, construct, operate and modify nuclear power plants with a high degree of functional integrity, quality and reliability. STATEMENT OF POLICY It is the policy of Florida Power&Light Company to design, construct, operate and modify nuclear power plants of a quality level that will meet or'exceed.government regulations and will merit public confidence by providing electricity in a reliable, efficient and safe manner.RESPONSIBILITY The President of Florida Power&Light Company is responsible for the execution of the Quality Assurance Program for Florida Power&Light Company nuclear power plants.The authority for developing and verifying execution of the Program is delegated to the Director of Quality Assurance, through the Senior Vice President Nuclear and the Executive Vice President responsible for power generation and delivery.The head of each organization performing quality-related activities is responsible for: identifying those activities within his organization which are quality-related as defined by the QA Program;establishing and clearly defining the duties and responsibilities of personnel within his organization who execute those quality related activities; and planning, selecting, and training personnel to meet the requirements of the QA Program.CV R.E.Talion, President Florida Power&Light Company C 0 Z (7I 0 U.

TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION June 9, 1989 Page 1 of 32 1.1 GENRE UIREHENTS The FPL organizational structure shall be defined such that the responsibilities for establishment and implementation of the Quality Assurance Program are clearly identified. The authority and duties of individuals 'and organizations performing quality assurance and quality control functions shall be described, and shall illustrate the organizational independence and authority necessary to identify problems;to initiate, recommend, or provide solutions; and to verify implementation of solutions. In addition, the description shall illustrate that persons or groups responsible for verifying the correct performance of an activity are independent of the person or groups responsible for performing the activity.1.2 IMPLEM1%TATION The President of Florida Power R Light is ultimately responsible for the execution of the Quality Assurance Program for Florida Power E Light Company (FPL)nuclear power plants.The authority for developing and verifying execution of the program is delegated to the Director of Quality Assurance, the Senior Vice President Nuclear and the Executive Vice President. The reporting relationship of each department involved with the Quality Assurance Program is shown in Appendix A, Figure 1-1.To provide for a review and evaluation of Quality Assurance Program policies and activities, the President has established the Quality Assurance Committee, chaired by the Executive Vice President. This organization's responsibilities are defined in Section 1.2.1.0 Vl C 0 z Ol CV E 0 IL TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, page 2 of 32 l.2 IHPURENTATION: (Cont')In addition, a Quality Assurance Program Review Committee (QAPRC)(formerly the QA/QC Coordinators) has been established to review changes to the Quality Assurance Program and to provide an interface for quality matters in each department affecting quality.This organization's responsibilities are defined in Section 1.2.2.The head of each department or organization performing quality-related activities is responsible for: a)identifying those activities within the organization which are quality-related as defined by the Quality Assurance Program;b)establishing and clearly defining the duties and responsibilities of personnel within his organization who execute those quality-related activities; and c)planning, selecting, and trainin personnel to meet the requirements of the Quality Assurance Program.The responsibility, authority, and organizational relationship for performing quality-related activities within each organization shall be established and delineated in organizational charts and written job or functional descriptions. A Quality Assurance Program Review Committee (QAPRC)Member shall be designated by the head of each department or organization except for the E Quality Assurance Committee, since this committee is a policy forming body (of which the Director of Quality Assurance is a member).The QAPRC Member is the prime interface for coordination of quality-related matters within the member's department, with the Quality Assurance Department, and with other departments. ID CV D L N C O z Ol Ol 0 The organization chart, Appendix A, Figure 1-1, illustrates the lines of authority and areas of responsibility for each of the organizations that are involved in quality-related activities. , The Project Management organization shown in this figure is applicable during design, procurement, construction, repairs and preoperational start-up and testing of power TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 9, 1989 Page 3 of 32 1.2 IMPLEMENTATION: (Cont')plant and modifications of power plants (determined by management on a case-by-case basis)as described in Section 1.2.4.Below are listed the departments and organizations that have Quality Assurance responsibilities. Specific organizational responsibilities for implementation of the Quality Assurance Program are described in the corresponding section numbers.1.2.1 Quality Assurance Committee 1.2.2 Quality Assurance Program Review Committee 1.2.3 Nuclear Energy Department -Nuclear Power Generation -Nuclear Corporate Staff 1.2.4 Project Management Department

1.2.8 Construction

1.2.9 Power Supply 1.2.10 Inventory Resources 1.2.11 Company Nuclear Review Board 1.2.12 Nuclear Fuel 1.2.13 Corporate Records Services 1.2.5 1.2.6 Corporate Contracts Department Environmental Affairs 1.2.14 Documentary Files 1.2.7 Purchasing 1.2.1 Quality Assurance Committee The Quality Assurance Committee, chaired by the Executive Vice President, is comprised of executive level members of management with responsibilities for the execution of the Quality Assurance Program within their responsibilities. This Committee's composition is delineated in its current charter and it'reporting relationship is shown in Appendix A, Figure 1-1.The Quality Assurance Committee is responsible for reviewing and evaluating Quality Assurance Program policies and activities. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 I ORGANIZATION Rev.15 Date June 9, Page 4 1.2.1 ualit Assurance Committee: (Cont'd)Policy changes shall be initiated when Committee findings indicate the necessity. Quality Assurance Program status reports shall be periodically prepared by the Quality Assurance Department and routed to the members of the Quality Assurance Committee for their review.In addition, Quality Assurance Committee meetings shall be held by the Executive Vice President to keep members apprised of conditions including signif icant problems that require management attention. The Quality Assurance Committee shall be the final authority for resolution of contested quality policies, differences of opinion, and stop-work or other corrective aetio requests when lower-level agreement cannot be reached between Quality Assurance or Quality Control and other departments. Periodic audits of the Quality Assurance Department shall be performed by z:earn independent of the Quality Assurance Department, whic.', is selected and approved by the Chairman of the Quality Assurance committee. The results of this audit are presented to the Quality Assurance Committee. 1.2.2 Quality Assurance Program Review Committee (QAPRC)IO CV 0: 5 Vl C a Z Oh C4 C 0 U.The QAPRC (formerly the QA/QC Coordinators) was formed as an organization with the responsibility to review and resolve recommended changes to the Quality Assurance Program.This committee is administered by the Quality Assurance Services group.Quality Assurance Program changes reviewed by the QAPRC are reviewed and signed by the department heads or individuals listed on each Quality Procedure. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 1989 Page 5 of 1.2.3 Nuclear Energy Department Nuclear Energy responsibility for the plant begins with the Department's acceptance of a system or portion thereof from FPL Project Management. Throughout the remainder of plant life, Nuclear Energy maintains control of and responsibility for any plant modifications coordinated b'y Nuclear Energy and for the preoperational 'and start-up testing, operation, maintenance, refueling, and modification of the plant in accordance with written and approved procedures. The organizational structure of Nuclear Energy is shown in Appendix A, Figure 1-1.The Senior Vice President Nuclear has overall responsibility for Nuclear Energy's activities. The Senior Vice President Nuclear is designated as the Senior Corporate Nuclear Officer of Section 6.0, Administrative Controls, of each Unit's Technical Specifications. Reporting to the Senior Vice President Nuclear are: The Site Vice President-St.Lucie, the Site Vice President-Turkey Point, the Vice President Nuclear Energy, Assistant, the Director of Quality Assurance and Director-Nuclear Licensing. Additionally, reporting to the Senior Vice President is the Vice President responsible for overview of regulatory activities. 1.2.3.1 Nuclear Power Generation EO CO 04 Vl C 0 Z Ol Ol The Site Vice President-St. Lucie and Site Vice President-Turkey Point are accountable for the operation, maintenance, and modification of their respective nuclear plant, as well as the selection, development and direction of.the assigned staff.They will act as liaison between the plants and corporate headquarters, and are accountable for ensuring that company TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 9, Page 6 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)policies and procedures are properly implemented and continued at the nuclear site.The Plant Manager (Plant Manager Nuclear at PTN)through the Vice Presidents -Turkey Point and St.Lucie Plants (as applicable) is responsible for the operation of the nuclear plant.The plant manager is additionally responsible for the establishment and implementation of plant Quality Control policy which implements the quality control aspects of the Quality Assurance Program.EO Ol D C m C 0 z Ol Ol 0 U.Reporting directly to the Plant Manager is the plant Quality Control Supervisor who has the authority and freedom t administer the plant Quality Control program and, when necessary, to stop activities adverse to quality.The Quality Control Supervisor, his staff, and personnel performing Quality Control inspection functions are required to be independent of groups or persons performing activities that they may be required to verify or inspect.Quality Control effort includes preparation and review of plant procedures, PCMs, quality-related instructions and procurement documents; Quality Control personnel are also responsible for inspection, monitoring, surveillance, and review of plant activities to verify compliance with the provisions of the facility operating license and the Quality Assurance Manual.The Quality Control Supervisor shall take corrective action for deficiencies identified, where applicable, and shall follow up on corrective action taken by other organizations until close out.He shall receive quality program direction from the Director of Quality Assurance. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Oate June 9, 1989 Page 7 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)The Plant Nuclear Safety Committee (PNSC)at Turkey Point Plant or the Facility Review Group (FRG)at the St.Lucie Plant is comprised of key plant management and staff personnel as described in the plant Technical Specifications. The PNSC/FRG serves the plant manager in a technical advisory capacity for the review of all safety-related procedures and activities that impact on plant safety and the facility operating license.The Quality Assurance Department shall be responsible for administering the FPL Quality Assurance Program.This includes" developing and verifying implementation of corporate policies, plans, requirements, and procedures affecting quality.This is accomplished through the Quality Assurance Department. The Quality Assurance Department retains responsibility for delegated portions of the Quality Assurance Program by performing initial evaluation and subsequent periodic audits of the contractors'uality Assurance Programs.The'Quality Assurance Program responsibility further extends to the performance of audits within the Company to assure management that the established requirements and procedures are being implemented, and that the Program complies with the baseline document requirements. The organizational freedom of the Quality Assurance function is accomplished through the corporate structure, illustrated in Appendix A, which provides independence from those departments responsible for design, procurement, engineering, construction and operation. With Quality Assurance as the sole function of this organizationally independent department, the Director of Quality Assurance and his staff, both on-site and off-site, are completely free from the cost and scheduling pressures of TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, Page 8 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)design, procurement, construction and operation. The Quality Assurance Department has the freedom and authority to: a)identify quality problems;b)initiate, recommend or provide corrective action;c)verify implementation of the corrective action;and d)recommend the stoppage of work or operations adverse to quality, when necessary. The Director of Quality Assurance reports to the Senior Vice President Nuclear.He is responsible for the technical direction and the administrative control (e.g., performance appraisal, salary review, hire/fixe, position assignment) of all members of the Quality Assurance Department. The Manager of Quality Assurance Services, the Superintendent of Quality Assurance-St.Lucie and the Superintendent of Quality Assurance-Turkey Point report administratively and functionally to the Director of Quality Assurance. The Superintendents of Quality Assurance receive technical direction from the Manager of Quality Assurance Services.ID Ol D C Ih C 0 2 Cl Ol 0 4.The Director of Quality Assurance, the Senior Vice President Nuclear, and the Vice President Nuclear Energy are each members of the Quality Assurance Committee. This reporting relationship and memberships on the Quality Assurance Committee assure that the Quality Assurance Department has direct access to the levels of management necessary to assure effective implementation of the Quality Assurance Program.Further, the Operations Quality Control Supervisors of both Turkey Point and St.Lucie receive quality program direction from the Director of Quality Assurance. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 1989 Page 9 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)The Manager of Quality Assurance Services directs and administers the Corporate Quality Assurance Program, including developing and verifying implementation of policies, plans, requirements, procedures and audits which assure compliance with the baseline documents listed in Appendix C of this Topical Quality Assurance Report.Additionally, the Manager of Quality Assurance Services is responsible for assuring the quality of safety related items and services, and their vendors, through the Quality Assurance Procurement Group.0 The duties, responsibilities, and authorities of each Quality Assurance group are described in the sections which follow." a.Quality Assurance Systems and Audits Group ID CO N V 0 Vl C 0 z Ol CV g 0 U.Quality Assurance Systems and Audits is responsible for the development and maintenance of the overall Quality Assurance Program, including the following: Develop and maintain the Quality Assurance Department Quality Instructions, Quality Assurance Department Training 6 Organization Manual, and the corporate Quality Assurance Manual;including the administration of the Quality Assurance Program Review Committee (QAPRC)Assist other departments in the development of Quality Instructions by review and comment and through interpretation of corporate Quality Assurance requirements; Develop and implement a Quality Assurance indoctri-nation program for PPL supervisory personnel, and a training program for the Quality Assurance Department; TOPICAL QUALMY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, Page 10 of 32 1~2.3.1 Nuclear Power Generation ,(Cont'd)Prepare reports on Quality Assurance Program activities for presentation to the Quality Assurance Committee by the Manager of Quality Assurance Services;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Department; Review Regulatory Guides, Codes, SAR Document Commitments and Standards for impact on the Quality Assurance Program and recommend appropriate program changes;Review documents submitted to the Company Nuclear Review Board (CNRB)as requested by the Qualit Assurance Department CNRB member;Plan, coordinate and implement a comprehensive system of periodic internal audits with support from the other , Quality Assurance groups, when necessary; Initiate, recommend or provide solutions and verify implementation of solutions for quality problems identified; Review PPL originated design specifications for inclusion of appropriate quality requirements. b.Quality Assurance Procurement Group Ol'P D K IA C 0 2 Ol Ol C 0 Quality Assurance Procurement is responsible for assuring the quality of safety-related items and services, and their vendors, including the following: o Assist in the development and imp'lementation of policies, plans, requirements and procedures for the requisition and purchase of materials, equipment and TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9,]9g9 Page 11<<32 1.2.3.1 Nuclear Power Generation (Cont'd)services related to nuclear power plants and to the acceptance and storage of equipment and material;o Perform appropriate surveillance of hardware during manufacture; o Develop and implement a program for auditing of supplier.Quality Assurance/Quality Control programs including architect/engineer/ Nuclear Steam Supply System Suppliers; o Review and approve PPL procurement documents and changes to these documents to assure that the necessary quality requirements are imposed;o Assist other PPL departments in the identification of quality problems associated with procurement and storage;initiate, recommend, or provide solution;and verify implementation of solutions; o Review, approve and periodically audit the execution of PPL contractor quality assurance programs;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Procurement group;o Evaluate the Quality Assurance capability of suppliers requested by Purchasing and Corporate Contracts and maintain the Quality Assurance Department"Approved Suppliers List".The responsibility of this group, in terms of phases of procurement, begins with the preparation of the procurement document, extends through bid evaluation, vendor selection,..fabrication and shipment;and ends upon receipt of shipment at the operating plant or warehouse. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 9 Page 12 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)This group, through audits and surveillances, assures that the contractors'rganizations performing Quality Assurance functions have sufficient authority and organizational freedom to implement effective Quality Assurance programs.c.Quality Assurance Group-Turkey Point The Superintendent of Quality Assurance-Turkey Point has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: N C lh C 0 z Ch OI E 0 4.o Coordinate in the development and implementation o policies, plans, requirements, and procedures for portions of the quality assurance program related to the operation and modification of nuclear power plants at Turkey Point Units 3 and 4 (PTN);Perform audits, assessments and other observations at PTN to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage, health physics, chemistry, plant security and fire protection; Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PTN through audits of FPL and contractor organizations; TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 1989 Page 13 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)Recommend stoppage of work or operations adverse to t quality at PTN in accordance with the appropriate Quality Procedures; Review and comment on Quality Instructions or equivalent quality-related administrative procedures prior, to issue, with respect to the requirements of the FPL Quality Assurance Program, the PTN Final Safety Analysis Report, and the PTN Technical Speci'fications; Assure that the status is tracked for all PTN open items identified by the FPL Quality Assurance Turkey I Point group, and inform appropriate management when there is an indication that a commitment will not be ID CO CV D 0 I C 0 Z Ol OI E 0 U.met on time;Maintain a file system for documentation of quality assurance activities performed by the Turkey Point group;Assure design-related activities performed by the Architect Engineer meet the quality aspects of the W contract;Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);Review site generated FPL procurement documents and changes to procurement documents in accordance with the appropriate Quality Procedures; Perform audits of PTN architect engineer and Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with the Quality Assurance Procurement group. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Oate June 9, Page 14 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)The interface with the Quality Assurance Procurement group ends with the receipt of a shipment of nuclear safety-related equipment at the plant site.The Quality Assurance program for the shipment is then within the purview of the Quality Assurance Turkey Point group.w Off-site interfaces for the resolution of quality-related problems and NRC items are with Project Management, Nuclear Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the Turkey Point operating plant.The Turkey Point group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-related problems.d.Quality Assurance Group-St.Lucie (PSL)The Superintendent of Quality Assurance St.Lucie has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: tb Ol O 0: N C 0 Z Ol Ol E 0 U.Coox'dinate in the development and implementation of policies, plans, requirements and procedures for portions of the quality assurance program related to the operation or modification of St.Lucie Unit 1 5 Unit 2 (PSL);Perform audits, assessments and other observations at PSL to verify compliance with Quality Assurance Program commitments, identify quality, problems and ensure TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 1989 Page 15 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage, health physics, chemistry, plant security and f ire protection; Identi f y requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PSL through audits of FPL and contractor organizations; Maintain a file system for documentation of quality assurance activities performed by the St.Lucie Projects-Quality Assurance group;Assure design-related activities performed by the Architect Engineer meet the quality aspects of the contract Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);Review site-generated FPL procurement documents and changes thereto, in accordance with appropriate Quality Procedures; Perform audits of PSL architect engineer/Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with the'Quality Assurance Procurement group;Recommend stoppage of work or operations adverse to quality at PSL in accordance with the appropriate Quality Procedures; TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, Page 16 of 32 1.2.3.1 Nuclear Power Generation (Cont'd)o Review and comment on Quality Instructions or equivalent quality-related administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PSL Final Safety Analysis Reports and the plant Technical Specifications; o Assure that the status is tracked for all PSL open items identified by FPL St.Lucie Projects Quality.Assurance group, and inform appropriate management when there is~an indication that a commitment will not be met on time;The interface with the Quality Assurance Procurement group ends with the receipt of a shipment of nuclear safety-related equipment at the plant site.The Quality Assurance program for the shipment is then within the purview of the St.Lucie Projects Quality Assurance group.ID EO C4 O 0: Vl C 0 Z Ol Ol e 0 U.Off-site interfaces for the resolution of quality-related'roblems and NRC items are with Project Management, Nuclear.Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the St.Lucie operating plant.The St.Lucie Projects Quality Assurance group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-related problems.The Director-Nuclear Licensing is responsible for coordinating the NRC interface, distributing NRC documents requiring actions, evaluating potential impact and responding to all NRC action ~~r~~r~~I~~I~~~~~~~~~~~~~~0~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~l-~.~~~~~~~II~ll~~~~~~l~~~II~~~~~~l~~~~~~-~~ TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date June 9, Page 18 of 32 1.2.3.2 Nuclear Corporate Staff (Cont'd)responsible for approval of design output.JPN is responsible for defining the scope of delegated activities and the responsibilities of the contractor. Prior to the release of design outputs by contractor organizations, JPN ensures that the contractor is technically qualified to perform the design-related activity.JPN is responsible for development and maintenance of the design control program governing design-related activities performed by JPN and for providing technical support to the Quality Assurance Department for assessing the adequacy, implementation and effectiveness of contractor design control programs.JPN is responsible for the preparation, revision, approval and distribution of plant design drawings that are identified to be maintained as"as constructed" drawings during plant operation. The Director-Nuclear Engineering reports to the Vice President-Nuclear Energy as shown in Appendix A, Figure 1-1.CV D C PA C 0 Z Ol CV E 0 IL The Director-Nuclear Engineering directs the engineering aspects of all FPL nuclear power plant projects during construction and operation to assure efficient, economical and reliable power plant design, conformance with engineering schedules and budgets and compliance with regulatory requirements. The Maintenance Manager Nuclear is responsible for directing activities in support of major plant maintenance projects, modifications and upgradings, as well as the development of work TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9,].989 Page 19 of 32 1.2.3.2 Nuclear Corporate Staff (Cont'd)methods, specifications and systems to promote increased productivity. The Manager Nuclear Energy Services is accountable for technical staff support to the-generating department and certain centralized special functions. This group consists of section supervisors and technical specialists, with functions including Health Physics, Chemistry, Radiological Waste, Emergency Planning, Plant Support, and Materials, Codes and Inspections. 0 The Manager of Nuclear.Training prepares policy documents regarding nuclear training and provides support to secure the necessary resources to ensure that Nuclear Energy personnel are adequately trained.They must have adequate technical and job-related skills to provide safe and efficient operation while complying with NRC requirements. The Manager of Planning and Control-Nuclear directs or coordinates the planning, administration and control of information management, budgeting and cost control, nuclear security, personnel, and rate regulatory activities for the Nuclear Energy'Department. The Manager of Nuclear Security'reports to the Manager of Planning and Control and is responsible for coordinating the overall development and implementation of nuclear security-policy for the Nuclear Energy Department. 0 C 0 z Ol C 0 U. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, Page 20 of 32 1.2.4 Project Management Department The Project Management Department, through the Project General Manager, exercises management control of assigned projects.This management control begins when a Project is assigned to the Project Management Department and continues until the facility is accepted for operation or the project is complete.This management control includes the responsibility for coordination of specifications and requisitions, repair, construction and may include preoperational start-up and testing of power plant modifications. The Project Management Department organization is shown in Appendix A, Figure 1-1.The Director of Projects, reporting to the Vice President-Plant Support, has overall, responsibility for the activities of the Project Management Department. A Project General Manager, reporting to the Director of Projects, is responsible for completing the assigned project in compliance with technical and other project specifications, and for the application of the provisions of the Quality Assurance Manual during the project.The Project General Manager is responsible for obtaining corrective action from , any contractor's management when corrective action cannot be obtained at the project site management level and, when neces'sary, can exercise his authority to stop work on project activities adverse to quality.ED Ol CI C C 0 Z CII E 0 The overall responsibility for Plant Changes and Modifications to operating plants is defined in each plant's Technical Specifications. However, frequently the work of installation and administration of Plant Changes and Modifications is assigned TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9 19g9 Page 21 of 32 1.2.4 Project Management Department (Cont'd)to FPL Project Management Department. The Project Site Manager will report to the appropriate nuclear site Vice President but will also"receive guidance and advice from the Project General Manager.The Project Site Manager is additionally responsible for the functional direction of construction Quality Control for the purpose of coordinating inspection activities which implement the quality control aspects of the quality assurance program for modifications of projects assigned to Project Management. Activities affecting quality may be performed by FPL or contracted. Should any of these functions be contracted, the contractor may perform the activities under his own Quality Assurance Program, which must have prior approval by FPL Quality Assurance, or the contractor may directly adopt the requirements of the FPL Quality Assurance Manual.If the contractor implements the Quality Control function directly to the FPL Quality Assurance Manual requirements, the contractor's Quality Control Supervisor shall have the authority and freedom to administer the Quality Control program.Project Team Members are appointed by their home department heads as the departmental representative on the respective project, when requested by the Project General Manager.Team Members, other than Quality Assurance and Stores Department, report functionally to the Project General Manager, or the Project Site Manager, but continue to.receive administrative support and technical direction from their home department. Team members are responsible to the Project General Manager for home department support to the project. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date June 9, Page 22 of 32 1.2.5 Corporate Contracts Department The Corporate Contracts Department is responsible for generation, negotia" ion and issuance of contracts over specified time periods and dollar limits for turbine generators, steam generators, nuclear steam supply systems (NSSS), new items, repairs, constructors, construction managers, and Architect Engineer (A/E)and consulting services.CorporateContracts is also responsible for assuring that technical and quality requirements developed by others are incorporated in such contracts, as appropriate, and that these contracts have the required approvals. Details of the activities of the department in fulfilling this responsibility shall be delineated in the appropriate Quality Procedures. The Manager of Corporate Contracts reports to the Director of Procurement 6 Material Management. The Corporate Contracts Organization is shown in Appendix A, Figure 1-1.1.2.6 Environmental Affairs Environmental Affairs is responsible for obtaining the federal and state environmental permits required for FPL facilities and operations. Environmental Affairs is responsible for overall coordination of non-radiological environmental monitoring (federal and s'tate)programs at the nuclear power plant sites.lO Ol O C C 0 z Ch Ol 0 IL The Manager of Environmental Technical Services, the Manager of Environmental Resources and Planning and the Manager of Environmental Permitting and Programs report to the Director of Environmental Affairs as illustrated in Appendix A, Figure 1-1.The Director of Environmental Affairs has overall responsibility for implementation of the Environmental Protection Plans at nuclear power plant sites. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 19g9 Page 23 of 32 1.2.6 Environmental Affairs (Cont'd)The Environmental Affairs Department through its management of the Company Environmental Review Group (CERG)is responsible for overall coordination of environmental monitoring programs and requirements related to the Environmental Protection Plans.The CERG provides review of proposed changes to the Environmental Protection Plans, review of any violations of monitoring and/or limitation requirements of federal and state permits and Environmental Protection Plans and review of plant activities as described in those Environmental Affairs Department Environmental Procedures subject to QA requirements. The CERG provides information to the Director of Environmental Affairs and the Chairman of the CNRB on environmental matters for which requirements are included in Environmental Protection Plans.1.2.7 Purchasing The Purchasing Department is responsible for the purchase of materials and services by FPL for its nuclear power plants with the exception of those materials and services secured by Corporate Contracts and Nuclear Fuels.Materials and services for nuclear safety-related application are secured only from approved suppliers, or as commercial grade, as applicable. The Department is responsible for assuring that technical and quality requirements developed by others are reviewed and approved by the designated quality departments, as applicable, are incorporated in the procurement document which the department authorizes. It is responsible for maintaining traceability of TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 9, Page 24 of 32 1.2.7 Purchasing (Cont'd)purchase records from acceptance of requisitions through payment of the purchase order invoices.The Manager of Power Plant Purchasing reports to the Director of Procurement 5, Material Management who reports to the Vice President of Corporate Services, Chief Financial Officer as shown in Appendix A, Figure 1-1.1.2.8 Construction The Juno Construction Management Department (JCM)is responsible for providing direction and coordination regarding construction, supervision and management, equipment utilization, quality control, welding, NDE and other construction support activities. The Director of Construction reports directly to the Vice President-Plant Support.He is responsible for directing and administering effective management of the department to ensure compliance to the corporate policies, practices and procedures. Reporting to the Director of Construction Management are the Manager of Plant Construction and the Manager of Construction Quality Control, Welding and NDE.Ol D C Ih C 0 z Ol N E 0 U.The Manager of Plant Construction is responsible for providing qualified construction support personnel to the Project Site Manager.Reporting administratively to the Manager of Plant Construction are the Lead Construction Supervisors. The Lead Construction Supervisor is responsible for conformance of project construction activities to the requirements of TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 1989 Page 25 of 32 1.2.8 Construction (Cont'd)specifications, codes, regulations and site procedures. He supervises the construction peisonnel assigned to the project, coordinates construction 'activities, including the scheduling of construction personnel requested by the Project Site Manager.n The Manager of Construction Quality Control, Welding and NDE is responsible for directing and administering the Construction Quality Control and Welding Programs and for the technical direction and administrative control of all personnel within the Construction Quality Control and Welding organizations. This includes the development and implementation of policies, plans and procedures to meet the requirements of the Quality Assurance program, codes and standards. Reporting to the Manager of Construction Quality Control, Welding and NDE are the site Project Quality Control Supervisors, NDE Level III Supervisor, FPL Welding Superintendent and a staff of Quality Control Coordinators. Construction Quality Control is responsible for providing inspections as required, to assure that backfit activities meet the requirements of engineering drawings, specifications, codes and standards. This responsibility extends from receipt inspections of material on-site to acceptance of the installed items prior to turnover to the Nuclear Energy Department. It also includes verification of conformance of an item or activity accomplished during this period to quality requirements (e.g., records review, NDE, inspections). 0 N C 0 z Ol r CV 0 V. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date June 9, Page 26 of 32 1.2.8 Construction (Cont'd), Each nuclear power plant is assigned a Project Quality Control Supervisor, who directs the on-site backfit Quality Control organization. The Project Quality Control Supervisor reports administratively and technically to the Manager of Construction Quality Control, Welding and NDE, however, he also reports functionally to the Project Site Manager for the purpose of coordinating and scheduling inspection activities. The functional/administrative reporting roles provide the necessary independence of thesite Construction Quality Control organization and also maximizes the communication between the Construction staff, the Quality Control staff and the Nuclear Energy staff.ID Ol C 5 C O z Ol CV 0 The Project Quality Control Supervisor is-responsible for first line verification of the conformance of backfit activities to quality requirements, specifications, codes and local, State and Federal regulations. He directs on-site implementation of the Construction Quality Control Program which includes supervision, and daily coordination, and scheduling of inspection activities, and review of inspection results.The freedom and independence of the on-site Quality Control organization to assure the effectiveness of the Quality Control Program from pressures of cost and scheduling is derived from the Project Quality Control Supervisor's administrative and technical reporting relationship to the Manager of Construction Quality Control, Welding and NDE.Both the Manager of Construction Quality Control, Welding and NDE, and the Project~Quality Control Supervisor have the authority to stop work or>>operations adverse to quality if the need arises. TOPICAL QUALI'.IY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9]989 Page 27 of 32 1.2.8 Construction (Cont'd)The NDE Level III Supervisor is responsible for directing and monitoring the NDE activities performed under the control of the Construction Management Department. He is responsible for preparation, revision and implementation of NDE procedures, and the training, testing and qualification of the NDE personnel performing these activities. He is also responsible for providing the programs and direction for performance of NDE activities meeting the ASME, AWS and other NDE code requirements. The Quality Control Coordinators provide staff technical and administrative support to the Manager of Construction Quality Control, Welding and NDE in the preparation, review, issue and monitoring of the Construction Quality Control program to ensure effective implementation. 0 0 C 0 Z Ol CV C 0 The FPL Welding Superintendent reports to the Manager of Construction Quality Control, Welding and NDE.His responsibilities are to develop, maintain and control the FPL Welding Control Manual with assistance from Nuclear Engineering, to originate and qualify welding procedure specifications and qualification of welders and welding operators to meet the applicable code requirements. He provides administrative and technical direction to the personnel within the FPL welding control program to meet engineering welding standards and code requirements. Reporting to the FPL Welding Superintendent are E the Welding, Supervisors at each Nuclear site.r The organization structure of the Construction Management Department" is illustrated in Appendix A, Figure 1-1. TOPICAL QUALITY ASSURANCE REPORT TQR 1'Rev.15 ORGANIZATION Date June 9, Page 28 ot'2 1.2.9 Power Supply Within the Power Supply Department only equipment and services provided by the System Protection Group and Power Supply Technical Services Group are subject to the requirements of the Quality Assurance Program.Appendix A Figure 1-1 illustrates the reporting relationship. System Protection is responsible for test, calibration and maintenance of certain high voltage electrical protective relays for safety-related systems of the nuclear plant.Activities of System Protection include final wiring connection checks, preoperational check-out and test of system protection devices and providing inspection of equipment under their cognizance. Power Supply Technical Services is responsible for providing certain setpoint and checkpoint values for protective devices.1.2.10 Inventory Resources The Inventory Resources Department is responsible for the receipt, handling, storage, shipping and issue of items received at the plant site for control by Inventory Resources. This responsibility encompasses spare and replacement parts and components for'lant equipment through all phases of plant life.Ct EO C4 O C I C 0 z Ch N 0 U.During operations, Inventory Resources also performs additional quality-related activities such as handling and segregation for nonconforming items received for stores control.The Manager of Power Plant Stores reports to the Manager of Inventory Resources who reports to the Director of Procurement &Material Managemen as shown in Appendix A, Figure 1-1. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 19g9 Page 29 of 32 1.2.11 Company Nuclear Review Board The Company Nuclear Review Board (CNRB)reviews or directs the performance of reviews of activities concerning the technical aspects of the operating nuclear power plant insofar as they impact on plant safety, the health and safety of the public, and laws, regulations and licensing commitments. In addition, audits of these areas are performed under the cognizance of the CNRB.1 Where necessary, the Board may use consulting services to perform required reviews.The management level to which the CNRB reports is illustrated in Appendix A, Figure 1-1.Its composition is delineated in Section 6.0 of each facility's Technical Specifications. The Senior Vice President responsible for Power Delivery, Construction, Power Plant Engineering, and Projects will perform his CNRB membership duties as Acting Group Vice President. Subjects within the purview of the Board are listed in the appropriate plant Technical Specifications. The CNRB has the authority to carry out its responsibilities by way of written action letters, verbal direction, minutes of meetings or appointed subcommittees. 1.2.12 Nuclear Fuel IO CO N D 0 C 0 Z Ol CV E 0 4 The Nuclear Fuel Section'(FRN)of the Fuel Resources Department is responsible for the procurement, management, and accountability of FPL's nuclear fuel assets, and for providing technical support to fuel users within FPL.The Nuclear Fuel Section is under the direction of the Manager of Nuclear Fuel who has the responsibilities described below: TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9 Page 30 of 32 1.2.12 Nuclear Fuel (Cont'd)ID Ol D C PA C 0 Z Ol N 0 U.o Forecasting FPL's nuclear fuel requirements and the availability and price of nuclear fuel;o Preparing the procurement specifications for components of the nuclear fuel cycle;o Determining sources of supply and evaluating alternatives; o Making commercial arrangements, including contract negotiations with vendors for acquisition, processing and delivery of nuclear fuel and related services for the nuclear fuel cycle;o Assuring that'technical and quality requirements including inputs from other FPL departments are incorporated in fuel contracts and letters of authorization and that these documents have the necessary approvals; o Administering and managing contracts for nuclear fuel and related services to assure that contractual obligations are met, and serving as FPL liaison in all matters of nuclear fuel and fuel-related contracts; o'roviding support to the Quality Assurance Department for their auditing of nuclear fuel design and fuel assembly manufacturing; o Performing fuel management and safety analyses of nuclear cores to'support plant licensing; o'evelopment and/or review of fuel and nuclear physics desi'gn;Performing the project management function with respect to nuclear fuel;Reviewing core-related changes to Safety Analysis Reports and Technical Specifications for compliance with design criteria and regulatory requirements; TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 9, 19g9 Page 31 of 32 1.2.12 Nuclear Fuel (Cont'd)Participating in start-up physics tests and providing other technical support for operating nuclear power plants;Planning, maintenance and implementation of the Corporate Special Nuclear Materials program.The Manager of Nuclear Fuel reports to the Director of Fuel Resources as shown in Appendix A, Figure 1-1.The Fuel Services Section of the Fuel Resources Department is responsible for the accountability reporting of FPL's nuclear fuel assets to other FPL groups, and for providing support in computer code maintenance to the Nuclear Fuel Section (FRN).The Fuel Services Section is under the direction of the Manager of Fuel Services who has the responsibilities described below: Provide and maintain computer codes and procedures available for Fuel Resources'ine functions and other departments for daily use in maintaining records, performing safety analysis and core design, reporting of off-site nuclear fuel management activities and providing economic data;Maintain effective and controlled computer access to nuclear applications; Performing audits and coordinating accountability reporting on all nuclear fuel;Develop and provide, to appropriate FPL groups, information necessary to determine FPL's fuel-related costs and to finance fuel-related expenditures. The Manager of Fuel Services reports to the Director of Fuel Resources. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZhTION Date June 9, Page 32 of 32 1.2.13 Corporate Records Services The Manager of Corporate Records Services is responsible for: ensuring the Quality Assurance records program activities are managed in accordance with'pplicable laws and regulations; assisting with the development and implementation of effective and compatible records and micrographics programs;developing, approving and maintaining record retention schedules; establishing parameters for indexing in the corporate records'omputerized Record Management System (RMS);locating acceptable record storage areas when requested; storage, retrieval and control of records/documents as requested by other departments; leading the evaluation of specially designated"Quality Assurance approved" storage facilities and maintaining the records of this evaluation. The Corporate Records Services organization is shown in Appendix A, Figure 1-1.1.2.14 Documentary Files The Supervisor of Documentary Files is responsible for receiving, maintaining, retrieving and storing the Quality Assurance records in connection with licenses and contracts received from other departments. The Documentary Files organization is shown in Appendix A, Figure 1-1.ID Ol'P D C Ih C 0 Z Ch N C 0 U. TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASKJRANCE PROGRtLM Rev.June 24,'988 Page]of 9 2.1 GENERAL RE UIREMENTS Florida Power 6 Light Company has established a Quality Assurance Program which complies with the criteria of 10 CFR 50 Appendix B, and meets the requirements of Regulatory Guides and Industry Standards referenced in Appendix C, of this report.'The Topical Quality Requirements and attached Policy Statement,, together with the Quality Procedures and Quality Instructions document the Program and the FPL policy with regard to Quality Assurance. 'his Program shall be instituted for each plant site in a schedule consistent with accomplishing the required activity and shall be carried out throughout the life of FPL nuclear plants.The requirements of the FPL Quality Assurance Program shall only apply to nuclear safety-related structures, systems, and components as identified in the Safety Analysis Report for each nuclear unit.Additionally, the requirements of the FPL Quality Assurance Program shall apply to all FPL, contractor, or consultant organizations performing activities affecting-the quality of safety-related structures, systems, and components of FPL nuclear power plants.Documented procedures shall require and define indoctrination and training of personnel performing activities affecting quality as necessary to assure thag suitable proficiency is achieved and maintained. Periodic program reviews of the status and adequacy of the FPL Quality Assurance'Program shall be accomplished by the independent audit team described in Section 1.2.1 and by Quality Assurance Department audits.IA C 0 Z Ol Ol E 0 4. TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASSURANCE PROGRAM Rev.Date June 24, 1988 Page 2 of 9 2.1 General Requirements (Cont'd)Management of organizations outside Florida Power 6 Light Company participating in the Program shall be required to regularly review the status and adequacy of that part of the FPL Quality Assurance Program which they are executing. The FPL Quality Assurance Department shall review and concur in the Quality Assurance Program of contractors. 2.2 2.2.1 Goals and Objectives As stated in the Policy Statement of the President of Florida Power 6 Light Company, the goal of the FPL Quality Assurance Program is to maintain quality levels in an effective and efficient manner, and to assure the high degree of functional integrity and reliability of nuclear safety-related structures, systems, and components. To meet this goal, the following objectives of the FPL Quality Assurance Program have been defined: a 0 Define through documented procedures and instructions the quality activities that apply to the design, fabrication, b.procurement, modification, testing, operation, maintenance, and repair af nuclear power plants;Establish, assign, and document the responsibilities refueling, for those N e C Fl a 0 Z OI F 0 4.c~activities affecting quality of safety-related structures, systems, and components; Establish confidence that the design, fabrication, modification, an.operation of nuclear power generation facilities are performed in a manner consistent with FPL policies by assuring quality-related activities are performed by responsible personnel; TOPICAL QUALITY ASSURtQiCE REPORT TQR 2.0 QUALITY ASSURANCE'PROGRAM Rev.8 oa e June 24, 1988 Page 3 of 9 2.2.1 Goals and Objectives (Cont'd)d.e.Apprise management of unresolved problems and trends which could have a significant effect on nuclear power plant safety;and Prevent schedule delays and high cost due to poor quality.2.2.2 Program Documentation The Topical Quality Assurance Report, which defines the policy, goals, and objectives regarding the Quality Assurance Program, shall be contained in the FPL Quality Assurance Manual, and used as guidance for the development of corporate level Quality Procedures which are also contained in the Quality Assurance Manual.Revisions to the Topical Quality Assurance Report will be made, as needed, to reflect current FPL program requirements and descriptions of activities. These revisions shall be made in accordance with a Quality Procedure. If a program revision reflects a reduction of the commitments from the baseline documents contained in Appendix C, the revision shall be submitted to and approved by the NRC prior to implementation. In all other cases, amendments to the Topical Quality Assurance Report will be submitted to the NRC to reflect implemented program revisions on an annual or more frequent basis.Vl C 0 Z Ol N 0 U Quality Procedures shally be~written by the department with major responsibilities for an activity, or by the Quality Assurance Department when requested. These procedures shall be reviewed by all the departments with responsibility for some portion of that procedure, and shall be approved by the major implementing departments with co-approval by the Director of Quality Assurance. A listing of corporate level Quality Procedures is contained in Appendix E. TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASSURANCE PROGRAM Rev.Date, June 24,].989 Page 4 of 9 2.2.2 Program Description (Cont'd)Each Quality Procedure shall be written to further address criteria contained in the Topical Quality Requirements and to further define the FPL Quality Assurance policies, plans, and program where action is requiMed 5y more than one department. Each department head shall have the responsibility for implementation of the Quality Assurance Program, which includes compliance with procedure requirements applicable to his department. In addition, he shall be responsible for the preparation, approval, and distribution of Quality Instructions, operating procedures, testing'rocedures, or other instructions where further guidance is necessary for implementation of the Quality Assurance Program requirements within his department. Quality Instructions shall be reviewed by the Quality Assurance Department at each revision.2.2.3 Structures, Systems, and Components Ol 4 C 5'C 0 z Ol N C 0 LL The requirements of the FPL Quality Assurance Program shall apply to nuclear safety-related structures, systems, and components, as defined in the SAR..Safety-related structures, systems, and components are listed as those necessary to assure the integrity of the reactor coolant boundary,~the capability to shutdown the reactor and maintain it in a safe shutdown condition,. or the capability to prevent or mitigate the consequences of accidents which could result in off-site exposures comparable to the guideline exposures of 10 CFR 100. TOPICAL QUALITY ASS%VINCE REPORT TQR 2.0 QUALITY ASSURANCE PRO(BAH Rev.Date June 24," 1g88 Page 5 of g 2.2.3 Structures, Systems and Components (Cont'd)Control over activities affecting the quality of safety-related structures, systems, and components .shall be to the extent consistent with their importance to safety.Such control shall include use of appropriate equipment, establishment of suitable environmental conditions, and assurance that all prerequisites for a given activity have been satisfied. The Program shall provide for controls over special processes and skills necessary to attain the required quality, and the need for verification of quality by inspection and test.Advance planning is required, for the control of management and h technical interfaces between FPL and contractors, during the phase-out of design and construction and during preoperational testing and plant turnover.This is achieved through periodic meetings of concerned organizations and the development of procedures which define responsibilities and interfaces, and control the testing and turnover of plant systems to FPL.2.2.4 Participating Organizations lh The FPL organizations with responsibilities for activities affecting quality ,of nuclear safety-related .structures, systems, and components are identified in TQR 1.0, which also briefly describes their assigned responsibilities. vl C 0 z Ol~4 fl N E 0 Florida Power 6 Light Company may delegate activities to contractor organizations and equipment vendors.Delegated activities are subject to the external organization's FPL approved Quality Assurance Program or the FPL Quality Assurance Program, or some FPL/approved combination thereof. TOPICAL QUALITY ASSUMNCE REPORT TQR 2.0 QUALITY ASSURANCE PROGRM Rev.Date June 24, 1988 Page 6 of 9 2.2.4 Participating Organizations (Cont'd)However, Fpi, shall retain overall responsibilities for the Quality Assurance Program.Procurement documents shall define the scope of delegated activities, as well as Quality Assurance Program requirements that shall govern these activities. The Quality Assurance Department shall review and approve the Quality Assurance Program governing contracted activities prior to award of contract except for activities for which the output is of a conceptual and/or prototype nature.In all cases, final approval shall occur at a point in the process to ensure that the output complies with the.requirements of the FPL approved Quality Assurance Pzogram.The object of this zeview shall be to verify that the program is in compliance with the applicable requirements of Appendix B, 10CFR50, and ANSI N45.2.Audits shall be conducted periodically to verify the acceptable implementation of the contractor's FPL approved Quality Assurance Program governing delegated activities. The Quality Assurance Department is zesponsible for conducting these audits.The initial review and periodic audits shall be performed by qualified Quality Assuz'ance Department personnel, and as appropriate, by technical specialists from other FPL departments and contractor organizations.

2.2.5 Indoctrination

and Training uh c~uh C O Z ru 0 A program shall be established'and maintained for'quality assurance indoctrination, and for training which assures that the required level of personnel competence and skill is achieved and maintained in the performance of quality-related activities. Quality 1 Procedures shall delineate the zequirements for an indoctrination TOPICAL, QUALITY ASSUKQiCE REPORT TQR 2.0 QUALITY ASSURANCE PROGRAM Rev.Date June 24, 3,998 Page 7 of 9 2.2.5 Indoctrination and Training (Cont'd)program to assure that personnel, responsible for performing quality activities are instructed in the purpose, scope, and implementation of the quality-related manuals, instructions, and procedures and that compliance to these documents is a mandatory requirement. Quality Procedures shall also require the head of each department (including the Quality Assurance Department) to be responsible for a training plan which assures that~personnel performing quality related activities are trained in the principles and techniques of the activity being performed. This training shall maintain the proficiency of personnel in'the skills necessary for the quality related activities through retraining; requalification or reexamination, as appropriate. When personnel are assigned to perform their functions under the direction of personnel from other than their home department, the department head of the organization providing direction is responsible for the indoctrinaton and training of personnel who perform quality-r'elated activities under his direction. Quality Procedures shall specify the requirements for documenting indoctrination and training sessions, including a course description, attendance, lecation, and date.2.2.6 Management Participation IO tO cv Vl C 0 Z Ol CII'E 0 U In additi.on to the involvement of department heads in implementing the Quality Assurance Program within their departments and the involvement of the Director of Quality Assurance and the Manager of Quality Assurance Services in the development, coordination, and TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 2>>0 QUALITY ASSURANCE PROGRAM>>June 24, 1988 Page 8 of 2.2.6 Management Participation (Cont'd)review of the Program, the Quality'ssurance Committee shall be apprised of the status and adequacy of the Quality Assurance Program on a periodic basis.The following actions shall be instituted to assure that the Quality Assurance Committee remains informed and meets its Program responsibilities: a>>b.c>>d.The Committee shall review a summary of the results of management level Quality Assurance audits of FPL Departments. The Quality Assurance Department shall circulate monthly reports of quality-related activities to members of the Quality Assurance Committee and affected department heads.The monthly reports may include such items as the status of audits, a summary of audit findings, the status of development projects, and descriptions of policy matters or problems requiring management attention. The Quality Assurance Committee shall review the status of the Quality Assurance Program on a semiannual basis.The review will include assessment of the Program goals, objectives, and accomplishments. Periodic audits of the Quality Assurance Department and Program shall be conducted by an independent audit group under the direction of the Chairman of the Quality Assurance Committee. This audit group shall'employ FPL audit procedures and shall distribute the audit report, to the Quality Assurance Department, and to the Quality Assurance Committee for review of findings and corrective action.Auditor certificat'ons of independent audit teams will be retained by the': silty Assurance Department. 0 0~~~~0~~~~0~~

TOPICAL QUALITY.ASKJKLNCE REPORT DESIGN CONTROL Rev.TQR 3.0 October 27, 1988 Page 1 of 7 3.1 GENERAL RE UIEKMENTS A Quality Assurance Program shall be established for design-related activities. This design control program shall ensure that the design is defined, controlled and verified;that applicable design inputs are specified and correctly translated into design output documents; that design interfaces are identified and controlled; that design adequacy is verified by persons other than those who designed the item;and that design changes, including field changes, are governed by control measures commensurate with those applied to the original design.Design records shall be developed to provide evidence that the design process and design verification were performed in accordance with the requirements of FPL's Quality Assurance Program.The design organization (Nuclear Engineering, the Fuel Resources Department or designated contractor organization) shall be responsible for the content of these records.Design records shall include design output documents and the important steps in the design effort.The intent of this documentation is to allow a technically qualified person to I understand how the design was developed, and to allow that person to verify the design based on.the design documentation and engineering data sources referenced therein.I/l C 0 Z Ol CV E 0 IL TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date October 27, 1 Page 2 of 7 3.2 IMPI2969iTATION The design organization's Quality Assurance Program for design control shall be approved by the FPL Quality Assurance Department prior to the release of approved-design outp'.by the design organization. The design organization is tne organization responsible for approval of design output.Quality Procedures and Quality Instructions shall be developed to delineate design control requirements governing activities performed by Nuclear Engineering and the Department and for their delegating activities organizations. design-related Fuel Resources to contractor 3.2.1 Design Process The design organization shall specify and document its design activities to the level of detail necessary to permit the design to be developed in a correct manner and to permit verification that design output documents satis'fy design input requirements. Design methods, materials, parts, equipment and processes, including those associated with commercial grade items that are essential to the function of the structure, systemor component shall be selected, reviewed and approved for suitability of application by the design organization. CV O C Vl C 0 z Ol cv 0 TOPICAL QUALITY ASKJRANCE REPORT DESIGN CONTROL Rev.TQR<3 0 Date October" 27, 1988 Page 3 of 7 3.2.1 Design Process (Cont'd)Design inputs shall be identified, documented, reviewed and approved by the design organization. They shall be specified to the level of detail necessary to permit the design activity to be carried out in a correct manner, and to provide a consistent basis for making design-related decisions, performing design verification and evaluating design changes.Changes to approved design inputs, including the reason for the changes, shall be approved, documented and controlled by the design organization. The design organization shall identify aspects of manufacture, f construction, inspection and testing critical to achieving the function of the structure, system or component. Quality standards and'quality requirements shall be specified on design output or procurement documents. Changes from approved quality-related requirements specified in design output, including the reason for the'hanges, shall be approved, documented and controlled by'the.design organization. Design analyses shall be controlled and documented. Approved design output documents and approved changes thereto shall be relatable to the design input by documentation in sufficient detail to permit verification. The design organization shall establish procedures to review industry design experience. As appropriate, this experience shall be made available to cognizant design personnel. ~I C 0 Z'l~t lh Ol E 0 TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.7 October 27, 1 Page 4 of 7 3.2.2 Design Change Control Changes to approved design output documents, including field changes, shall be justified, subjected to control measures commensurate with those applied to the original design, and shall be reviewed and approved by the same design organization that approved the-original design unless other organizations are specifically designated. Where a significant design change is necessary because of an incorrect design, as appropriate, Nuclear Engineering or Fuel Resources shall determine the cause of the incorrect design.As necessary, design and verification procedures shall be reviewed and modified to correct the cause of the incorrect design.During the operations phase, design changes shall also be reviewed by operating plant management including plant Quality Control.The intent of this review is to ensure that implementation of the design change is coordinated with any necessary changes to operating procedures and practices, and required Quality Control Surveillance activities. In accordance with plant technical specification requirements, nuclear safety-related 'design changes are, reviewed by the Plant Nuclear Safety Committee (PNSC)or Facility Review Group (FRG)and the Company Nuclear Review Board (CNRB).lo CV O C CCC C 0 2 CCI CII 0 TOPICAL QUALITY ASSUEVLNCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date October 27, l988 Page 5 of 7 3.2.3 Design Interface Control The design organization'hall be responsible for identification, control, resolution and documentation of design interface requirements. Procedures shall establish interface controls between participating organizations and between the various technical disciplines within the design organization. These procedures shall include the assignment of responsibility, and be in sufficient detail to cover the preparation, review, approval, release, distribution and revision of design output documents. For interdisciplinary design, approval documentation of each involved discipline of the design organization shall appear on the design output document or on a separate document directly traceable to the design output.The design organization shall designate a discipline(s) responsible for resolution of the comments of participating organizations. The designated discipline(s) approval of a design output shall also document resolution of the comments of participating organizations. 3.2.4 Design Verification Design control measures shall be established to independently verify the design inputs, design process, and that design inputs are correctly incorporated into design output.The design organization shall develop procedures that govern design verification. These procedures shall require that the design organization identify and document the verification method utilized and that the documentation clearly identify those individuals performing the design verification. Vl C 0 z Ol Ol E 0 IL TOPICAL QUALITY ASKJRANCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date October 27, l Page 6 of 7 3.2.4 Design Verification (Cont'd)Design verification shall be performed by technically qualified individual(s) or group(s)other than those who performed the design.The original designers and verifiers may both be from the design organization. Design verification by the designer's immediate supervisor shall be limited to those instances where the supervisor is the only qualified individual available within the design organization. These instances are further restricted to designs where the supervisor did not specify a singular'esign approach, or did not restrict design methods or alternatives, or did not specify design inputs (unless the specified design inputs have already been independently verified). Justification for verification by the designer's immediate supervisor should be documented along with the extent of the supervisor's involvement in the design.The design organization shall be responsible for determining the extent of design verification and methods to be employed.The methods may include one or more of the following: the performance of design reviews, the use of alternate calculations, or the performance of qualification tests.This shall apply to original design and to.changes to approved design output.Where reverification is not required for a design change, the bases shall be documented by the'esign organization. Cursory supervisory reviews and mathematical checks for calculation accuracy do not satisfy the independent design verification requirement. CV C vl C 0 Z Ch N E ,0'J TOPICAL QUALITY ASSURANCE REPORT'QR 3.0 DESIGN CONTROL Rev.October 27, 1g88 Page 7 of.7 3.2.4 Design Verification (Cont'd)Design verification shall normally be completed prior to release of design output for procurement, manufacture or release by the design organization for use in design activities by a participating organization. Verification shall be conducted based on the status of design at the time of release of design documents. Where this timing cannot be met, verification may be deferred provided that the unverified portion of the design output, and all design output documents, structures, systems and components based on the unverified portion of design are identified and controlled. In all cases verification shall be completed prior to relying on any affected items to perform their design functions. 3.2.5 Computer Codes Organizations utilizing computer codes as a method for design shall maintain instructions or procedures to effect the following: 1.That such codes are verified for their particular use using benchmark problems, alternate calculations, comparison with other code or experimental results, design review or similar.methods, 2.3.That such codes have been qualified for their specific application sufficient to ensure valid results, That such codes are provided with user instructions sufficient for a technically competent individual to follow, 4.That configuration controls are provided to assure that.such code changes or modifications are documented and controlled.

TOPIChL QUhLITY hSSURhNCE REPORT TQR 4.0 Rev.June 24, 1988'of 3 4.1 GERKhL UIKRENTS C/N DATE PG 32 1/24/89 2 Procurement of items and services shall be performed in accordance with procedures which assure that applicable regulatory requirements, design bases, code requirements, and other requirements necessary to assure quality shall be included or invoked by reference in the px'ocurement document.These procedures shall delineate the sequence of actions to be accomplished in the preparation, review, approval, and contxol of procurement documents. Changes to procurement documents shall be subjected to the same degree of control as utilized in the preparation of the original documents. 4.2 IMPLEAD?NTATION

4.2.1 Procurement

Document Provisions Quality Procedures and Quality Instructions shall idengify the responsibilities and actions required of the organizations originating, reviewing, approving, and controlling. procurement documents.. These procedures shall require the procurement documents to specify: a~b.The scope of work to be performed. Technical requirements (by specifying or referencing) which e shall include the'pplicable components and materials identification requirements, drawings, specifications, procedures, instructions, codes, and regulations and provide for identification of applicable test, inspection and acceptance requirements, or special process instructions. '0 IJ 0 Vl C 0 z Ol cv E TOPICAL QUALITY ASSURANCE REPORT TQR 4.0 Rev.CONTROL June 24, 1988 2 of 3 4.2.1 Procurement Document Provisions (Cont d)Co d.e.Quality Assurance Program requirements to be imposed on contractors which shall include the applicable portions of 10 CFR 50, Appendix B.Right of access which provides, as appropriate, for access to contractor facilities and records for inspection or audit by FPL or its designated representative, and to access for events such as witness and hold points.The documentation required to be prepared,'aintained, andlor submitted to FPL or its representative for review, approval, or historical record.The time of submittal of this documentation and the retention and disposition of quality assurance records which will not be delivered to FPL shall be prescribed. Consideration shall be given to the need for special requirements in the preparation and review of procurement documents. Procedures and instructions shall be prepared and implemented for special on-site handling or storage requirements. The receiving department shall be responsible for on-site implementation of the special handling, shipping, and storage requirements for items received and controlled by their organization. Special handling, preservation, storage, cleaning, packaging, and shipping requirements shall be specified, as appropriate, in the design documents or purchase orders.The requirements established in the design documents or purchase orders shall be consistent with industry accepted standards, the importance of equipment or material to nuclear safety, and the material or equipment's sensitivity to damage.The preparation of these design documents or purchase orders may be delegated by FPL'o other organizations. Thepreparation and control--of design documents and purchase orders is described in TQR 3.0.32 TOPICAL QlMZ1Y ASSURhHCE REPORT TQR 4.0 Rev, Oate June 24,'988 Page 3 of 3 4.2.2 Procurement Document Review Procurement documents shall be reviewed for correctness, and inspectability and controllability of quality requirements in accordance with Quality Procedures and Quality Instructions to assure that the appropriate provisions of Section 4.2.1 are included.This review shall be documented and performed by designated technical and quality evaluators, and shall assure that the procurement document was prepared, reviewed and approved as required.Spare or replacement parts for safety-related structures, systems, and components are subject to technical or quality requirements equivalent to or better than those used for the original equipment. Changes to procurement documents, whether initiated by FPL or their representative, are subjected to the same degree of control as that utilized in the preparation of the original document.4.2.3 Selection of Procurement Sources The Purchasing,- Fuel Resources or Corporate Contracts Department, as applicable, shall verify that the procurement document has been reviewed and approved, and that the supplier has been approved prior to issuing the purchase order for safety related materials or services.Supplier approval is not necessary if the important characteristics of the 3.tern'can be verified by inspection or test.The overall procurement requirements including those related to planning, bid evaluation, and review and concurrence of suppliers Quality Assurance programs are described in Quality Procedures and Quality Instructions. ' TOPICAL QUALITY ASSURANCE REPORT TQR 5.0 INSTRUCTIONS, PROCEDURES AND DRAWINGS Rev.October 27, 1988 Page 1 of 4 5.1 GENERAL BE UIREK?ZTS Activities affecting quality of nuclear safety-related structures, systems, and components shall be prescribed by documented instructions, procedures, or drawings of a type appropriate to the circumstances and shall be accomplished in accordance with these instructions, procedures, or drawings.These documents shall include appropriate quantitative criteria such as dimensions, tolerances, and operating limits', and qualitative criteria such as comparative 'orkmanship samples, to assure that the quality assurance activity has been satisfactorily accomplished. 5.2 IMPLl96&TATION 5.2.1 Quality Assurance Program Documents The FPL Quality Assurance Manual described in TQR 2.0 contains corporate Quality Procedures which comply with the criteria of 10 CFR 50, Appendix B.Quality Procedures and department level Quality Instructions provide direction for activities affecting quality.The Quality Assurance Department reviews and comments on Quality Instructions written by other departments. Comments concerning compliance with corporate Quality Assurance commitments and regulatory requirements are resolved prior to issuance.The Quality Assurance Department receives controlled copies of Quality Instructions issued by other departments. TOPICAL QUALITY ASSURANCE REPORT TQR 5.0 INSTRUCTIONS, PROCEDURES AND DRAWINGS Rev.Date October 27,'19 Page 2 of 4 5.2.2 Procedures and Instructions Instructions and procedures for activities affecting quality shall be prepared, reviewed, and approved in accordance with written r Quality Procedures or Quality Instructions. For plant operations, on-site plant procedures shall be prepared, reviewed, and approved in accordance with written instructions which includes a review for Control personnel. procedures, off-normal concurrence by Quality Assurance or Quality These plant procedures include operating and emergency procedures, test procedures, and calibration procedures. Also included are maintenance and repair procedures for subcontracted maintenance and repair activities which are outside the normal scope of plant craft capability: For backfit activities, contractors shall be required to have Quality Assurance Programs which contain written instructions for preparation, review, and approval of procedures, instructions, and drawings affecting quality.In addition, Contractor's site procedures and Quality Control inspection procedures shall be approved by FPL Project Site Manager, or his designee, following reviews by Quality Assurance or Quality Control personnel to assure compliance with Corporate commitment and regulatory requirements. ID EO Cll O C, 5 C 0 z Ol cv During the design, modification, and procurement phases, the Architect/Engineer or other contractors may be delegated responsibility for maintaining, issuing and verifying the I TOPICAL QUALITy ASSURANCE REPORT TQR 5.0 INSTRUCTIONS, PROCEDURES AND DRAWINGS Rev.October 27, 1988 Page 3 of 4 5.2.3 Procedures and Instructions (Cont'd)implementation of appropriate program documents. In this case, Quality Assurance Department audit and/or Construction Quality Control surveillance activities shall assure that such measures are established and implemented. Contractor programs shall clearly delineate the actions to be accomplished in the preparation, review and control of instructions, procedures and drawings, and the methods for complying with the appropriate criteria of 10 CFR 50, Appendix B.A plant change or modification of a magnitude requiring the assignment of a Project General Manager-Nuclear shall be subject to the Quality Assurance Program as discussed in above.5.2.3 Drawings The design organization is responsible for review and approval of drawings.For delegated design activities, as appropriate, Nuclear Engineering or the Nuclear Fuel Department may approve changes to drawings.The technical control of drawings, i.e., review and approval of the drawing and all changes thereto shall be governed by procedures. A means shall be developed and updated as required to identify approved drawings and revisions thereto.A Master Drawing List is the normal means used for this.ID 47 CV C 0 z Cll~t CV 0 U. TOPICAL QUALITY ASSURANCE REPORT INSTRUCTIONS, PROCEDURES AND DK9fINGS Rev.TQR 5.0 October 27", 19 Page 40f 4 5.2.4 Acceptance Criteria Quality Procedures and Quality Instructions require that quality-related instructions, procedures, and drawings include adequate quantitative and qualitative acceptance criteria, as appropriate, for determining satisfactory work performance and quality compliance. These acceptance criteria requirements apply to important activities such as design, operations, test control, inspection, and plant modifications. Z Ol I L'l C a Z Ch C4 0 TOPICAL QUALITy ASSURANCE REPORT DOCUMENT CONTROL Rev.TQRWS.O Date October'27, 1gSS Page 1 of 4 I 6.1 GENERAL RE UK%MENTS structures, systems, and components shall be controlled. These documents shall be prepared, reviewed for adequacy, and approved for release by authorized personnel in the effected organization. These documents shall be distributed to locations where the activity is performed. The distribution of documents such as instructions, procedures, and drawings which provide guidance, specifications, or requirements affecting the quality of nuclear safety-related Changes to controlled documents shall be so identified and shall be reviewed and approved by the same organization that performed the original review and approval unless otherwise specified in the implementing procedures. In addition, procedures shall provide for controlling obsolete documents to preclude the possibility of use of outdated documents.

6.2 IMPLEMENTATION

6.2.1 Responsibility

Quality Procedures shall delineate the control measures for controlled documents including, direction for the review for adequacy, approval by authorized personnel, distribution of controlled documents and verification that changes are received.These control measures shall apply to documents affecting the ID CO N quality of , nuclear safety-related components such as: structures, systems, and TOPICAL QUALITY ASK JRANCE REPORT TQR 6.0 DOCUMENT CONTROL Rev.Date October 27, 198 Page 2 of 4 6.2.1 Responsibility (Cont'd)a~b.c~d.e.design specifications; design, manufacturing, construction, and installation drawings;quality program manuals, procedures, and'nstructions; inspection, manufacturing, and'est procedures and instructions; plant operating and maintenance procedures; plant Safety Analysis Reports and related design criteria documents. The requirements for control of procurement documents are contained in TQR 4.0.During all phases of the plant life, it shall be the responsibility of each organization issuing and using controlled documents to use document control procedures. Procedures shall document the responsibility for review, approval, maintenance and distribution of documents including assuring revisions are initiated to interfacing documents within their organization. IO N C lh C 0 Z dl CII E 0 During the design and construction phase and for operating plant changes under their co'gnizance, the Architect/Engineer, Nuclear C Steam Supply System vendor, and other contractors shall be responsible for assuring that all revisions. required as a result of FPL comments, nonconformances, or engineering work are incorporated into revised documents. TOPICAL QUALITY ASSURANCE REPORT TQR 6.0 DOCUMENT CONTROL Rev.6.Date October'27, 1988 Page 3 of 4 6.2.2 Distribution of Controlled Documents Quality Procedures shall specify that controlled documents and revisions be distributed to locations where the activity is performed. 6.2.3 Drawing Control FPL assumes control of the drawings and Master Drawing List after initial operation of the facility or'elegates this activity to a qualified contractor. Nuclear Engineering shall require that participating design organizations update the drawings and Master Drawing List to reflect the as-built conditions of the facility prior to FPL's acceptance of these documents. Maintenance, distribution and control of the drawings and the Master Drawing List by FPL during the operation phase shall be assigned.to a drawing custodian. to release by the appropriate, Nuclear Revision to drawings shall be approved prior drawing custodian, approval shall be by, as Engineering, Nuclear Fuel, or a design organization designated by one of these departments. During the operation phase a system shall be established to provide ready access and availability of drawings to engineering and operations personnel; to identify drawings affected by approved plant design changes;and to update drawings and the Master Drawing List to reflect implemented design changes.vl C 0 Z Cll C4 0 CL, TOPICAL QUALITy ASSURANCE REPORT Rev.TQR 6.0 DOCUMENT CONTROL Date October 27, 19 Page 4 of 4 6.2.'4 Instruction 6 Procedure Control Participating organizations shall be responsible for development, maintenance and control of those documents identified in paragraph 6.2.1 issued by them as controlled documents. Each organization shall be responsible for the adequacy of their procedures. 6.2.5 Obsolete Documents Controls established by Quality Procedures and Quality Instructions shall assure that outdated copies of controlled documents are not inadvertently used.cv~I C Vl C 0 Z Ol Ol E 0 IL TOPICAL QUALITY ASSUKLNCE REPORT TQR 7.0 CONTROL OF PURCHASED ITEMS 8 SERVICES Rev.Date June 24,'1988 Page 1 of 3 7.1 GENERAL RE UIEKKBFZS Measures shall be established to assure that safety-related items or services purchased by or for FPL conform to the requirements of the procurement document.These measures shall include documented evidence of source selection, verification activities and examination of items or services to assure compliance with the procurement document.The effectiveness of the control of quality by contractors and subcontractors shall be assessed at intervals consistent with the importance, complexity, and quantity of the product or service.7.2 7.2.1 Initial Evaluation of Suppliers Procurement source evaluation and selection measures shall be specified in Quality Procedures and Quality Instructions which shall identify the responsibility of qualified individuals for determining supplier capability. The evaluation may require integrated action involving Quality Assurance and one or more organizations (e.g., Engineering, Construction, Fuel Resources or Purchasing) based upon the item or service being procured.This evaluation is to ensure that the FPL contractors comply with the applicable portions of 10 CFR 50, Appendix B.Documented evidence of the evaluation, and the acceptance of the contractor's quality program and procedures shall be retained in the Quality Assurance Department files.The determination of supplier approval shall be based on such factors as Vl C 0 Z Ol 0 U TOPICAL QUALITY ASSURANCE REPORT TQR 7.0 CONTROL OP PURCHASED ITEMS&SERVICES Rev.Oate June 24, 1988 Page 2 of3 7.2.1 Initial Evaluation of Suppliers (Cont'd)prior performance, historical quality performance data, source surveys or audits, and evaluation of the supplier's Quality Assurance Program.The basis shall be consistent with the importance, complexity, and quality required for the items or services involved.7.2.2 Verification Activities Quality Procedures shall define the requirements for verification activities such as surveillance, inspection, or audit to assure conformance of procured items and services to identified requirements. These verification activities shall be performed in accordance with written procedures, procurement documents and their references, which specify the documentation required and the characteristic or process to be witnessed, inspected, ver':=8, or accepted.FPL verification activities shall be accompl=.-.;",ed by qualified personnel'o verify that the supplier complies with quality requirements, and depending on the importance/complexity, shall be performed on those items where verification of procurement requirements cannot be determined upon receipt.7.2.3 Receiving Inspection Cl IN O 0: Vl a 0 2 Cl N C 0 U.Quality Procedures and Quality Instructions shall delineate requirements and responsibilities for the performance of receiving inspection. This inspection shall verify that suppl'ers have fulfilled their contractual obligation and that the procured items TOPICAL QUALITY ASSUKLNCE REPORT TQR 7.0 CONTROL OF PURCHASED ITEMS 6 SERVICES Rev.Date June 24,]988 Page 3 of 3 7.2.3 Receiving Inspection (Cont'd)meet the appropriate quality requirements. Receiving inspection shall include, as appropriate: a~b.c~d.e.Measures for verifying that the shipment is complete, properly identified, undamaged, and corresponds with the purchase order documentation; Measures for inspection of the item and review of supporting documentation (e.g., mill test reports, NDE reports)as required by the purchase documents; Measures for disposition of items to inspection instructions; Measures for identifying and controlling items including identification of inspection status prior to release from the receiving inspection area;Measures to ascertain that inspection records or Certificates of Conformance are available prior to release.7.2.4 Supplier Furnished Records Records required to be furnished by the supplier shall be specified in the procurement document.Certifications or documentation verifying conformance provided by the supplier shall identify the specific procurement requirements met (either by reference to the purchase order or by referenced requirements therein).Such certification shall identify any procurement requirements which have not been met and provide a description of those nonconformances dispositioned"accept as is" or"repair". 0 TOPICAL QUALITY ASSURANCE REPORT Rev.T R SO FLORIDA POWE'R 5 LIGHT COMPANY IDENTIFICATION AND CONTROL OF MATERIALS~ PARTS~AND COMPONENTS Date June i0 l986 Page l of 2 8.1 GENERAL RE UIREMENTS Materials, parts, and components, including partially fabricated assemblies, shall be identified and controlled as required throughout fabrication, receipt, handling, storage, installation, and use of the item.The identification of the item shall be maintained by heat number, part number, serial number, FPL MRS number, or other suitable means, and shall be physically marked'on the item or on records traceable to the item.The object of these controls shall be to prevent the use of incorrect or defective materials, parts, and components.(The FPL Material and Supplies-MdcS number is a number given to each unique type of item in inventory to distinguish it from each other type of item in inventory).

8.2 IMPLEMENTATION

Quality Procedures and Quality Instructions shall establish the responsibilities and requirements for the identification and control of materials, parts and components. The procedures and instructions used by all organizations shall assure that identification and control is maintained throughout fabrication, receipt, handling, storage, installation and use of items.Provisions include: aQ b.c, d.Requirements for traceability to appropriate documentation, such as: procurement documents, manufacturing documents, drawings, specifications, inspection and test records, and nonconformance reports.Controls to assure that the correct identification of an item is verified and documented prior to fabrication; receipt, handling, storage, installation and use.Requirements which assure that the method or location of markings do not affect the function or quality of an item.Establishment of identification requirements by specifications, drawings, procurement documents, instructions or procedures during initial planning.'Ol A e 0 4 FLORIOA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT IDENTIFICATION AND CONTROL OF MATERIALS, PARTS, AND COMPONENTS TQR 8.0 Rev.2 Date June l0, 198 Page 2 of 2 8.2 Implementation (Cont'd)FPL may delegate any portion of the implementation of the identification and control program to the Architect/Engineer, Constructor, Nuclear Steam Supply System vendor or other contractors. If delegated, contracts shall require that the contractor establish an identification and control program which meets the requirements of this TQR. TOPICAL QUALITY ASSURANCE REPORT CONTROL OF SPECIAL PROCESSES TQR 9.0 Rev.7 page October.27, 1988 Page Df 9.1 GENERAL RE UIRE2KNTS Measures shall be established to assure that special processes such as welding, heat treating, and nondestructive examination, are controlled and accomplished by qualified personnel using qualified procedures and equipment in accordance with applicable codes, standards, specifications, criteria, and other special requirements.

9.2 IMPLEMENTATION

Nuclear Engineering, or the Fuel Resources Department or the delegated contractor organization, as appropriate, shall include special process requirements in their design outputs and changes thereto.Special processes used during plant operations shall be the responsibility of the plant manager, who shall ensure that procedures are developed, reviewed, approved and controlled, and that personnel and equipment are qualified.

9.2.1 Identification

of Special Processes Special processes are those processes which must be qualified and controlled where quality is highly dependent on close control of process variables or operator skills, and objective verification (inspection, examination ur testing)of end quality is difficult. I ID CO Ol vl C 0 Z Ol Ol 6 0 U.As a further clarification, special processes identified as such by applicable codes and standards shall be controlled, qualified, and implemented in accordance with those codes and standards. Examples of special processes include (but are not limited to)welding, heat treating, and nondestructive examination. Others, i.e., flushing, protective coating, plating applications and nuclear cleaning should be reviewed to determine if they are special processes. TOPICAL QUALITY ASSURANCE REPORT TQR 9.0 CONTROL OF SPECIAL PROCESSES Rev.Date October 27, 19 2 Page'f 9.2.2 Procedure Qualification and Control Process control procedures written by FPL organizations or their contractors shall be used and qualified as required by applicable specifications, codes, or-mdards.Where FPL assigns work to outside contractors, the contractors shall make their procedures and personnel qualifications available for review to FPL prior to the start of work.The Architect/Engineer, Nuclear Steam Supply System vendor, or other organization designated by FPL shall be responsible for the evaluation and acceptance of on-site contractor special process procedures, and shall interface with the appropriate FPL department, as necessary, to resolve review comments with the contractor. The contractor shall also be responsible for the control and approval of sub-contractor procedures. 9.2.3 Personnel Qualification and Certification Ol~I 0'.PA a 0 Z Ol C4 0 U.Procedures or instructions shall specify personnel qualification and certi'fication requirements. Personnel responsible for the performance and verification of special processes shall be trained, testedand certified as'required by applicable specifications, codes and standards; Requirements for the period of certification, retesting, and recertification of personnel shall also be specified. Contractors shall qualify personnel'and maintain records of qualified personnel in accordance with applicable codes, standards, specifications, and contract or procurement document requirements. 9.2.4 Special Process Records. TOPICAL QUALITY ASSURANCE REPORT TQR 9.0 CONTROL OF SPECIAL PROCESSES Rev.pate October.27 p 3 3 Page of The Plant Manager is responsible for the review and retention of records.Records shall provide objective evidence that special processes were performed in compliance with approved procedures by qualified personnel and 9.2.4 Special Process Records (Cont'd)equipment. Records shall also be maintained for verification activities when required by procedure, code or specification. Results of nondestructive examinations shall be recorded in accordance. with applicable specifications, codes and standards. These records shall be retained by the vendor or supplied to FPL as required by contract or purchase orders.If records are to be retained by the vendor, the contract or purchase order shall specify the retention'eriod and instructions for final disposition of such records.For backfit activities, the Construction Quality Control organization is responsible for the review of nondestructive examination documents for acceptance. The Project Site Manager is responsible for assuring that documents for special processes utilized for modifications are properly collected, reviewed, accepted and transmitted for retention of records.N C 0 Z Ol~h Ol 6 0 L 0 TOPICAL QUALITY ASSURANCE REPORT TQR 10.0 INSPECTION Rev.Date May 10, j988 Page 1 of 5 10.1 GENEKQ RE UIREMENTS I A program for inspection shall be established and executed by or for FPL to verify conformance with the documented instructions, procedures and drawings for accomplishing an activity.Such inspections shall be performed by individuals or groups other than those who performed the activity being inspected. Examinations, measurements and tests of materials or products processed shall be performed for each work operation, where necessary, to assure conformance to established requirements. If direct inspection of processed materials or products is impossible or disadvantageous, indirect control by surveillance or monitoring shall be provided.Mandatory inspection, witness, or hold points beyond which work shall not proceed without the consent of FPL or a designated representative shall be indicated in the appropriate documents. 10.2 IMPLEMENTATION 10.2.1 Inspection Responsibilities For plant operations activities, a program for on-site inspection of activities affecting quality shall be established by the Nuclear Energy Department. Nuclear Energy shall perform inspections, surveillance and monitoring of plant activities and plant operations as required by established plans, schedules and/or procedurally required inspection, witness or hold points.In all cases, the personnel performing the inspection shall be independent of the group performing the work.A C 0 Z Ol~4 CI4 0 TOPICAL QUALITY ASSUKLNCE REPORT TQR 10.0 INSPECTION Rev.Date May 10, 1988 page 2 of 5 10.2.1 Inspection Responsibilities (Cont'd)For plant modifications assigned to Project Management Department or when requested by the Plant Manager, a program for on-site inspection of these activities affecting quality shall be established and executed by the Construction Management Department to ensure conformance with documented instructions, procedures and drawings.For these plant modifications, the Construction Management Department may delegate the establishment and execution of this program to a contractor or other designated FPL representative, but shall retain ultimate responsibility for the program.For preoperational start-up and testing of plant modifications, Nuclear Energy personnel may report functionally to the Project Site Manager and establish plans, schedules and procedurally required inspection, witness or hold points.In all cases, the personnel performing the inspection shall be independent of the group performing the work.The Construction Management Department shall also be responsible for performing receiving and process verification inspections for work under the jurisdiction of the Project Gener'al Manager, or as requested by the Plant Manager.F The System Protection Group may perform inspections of equipment within their purview during operations. performed in accordance vfith approved, qualified personnel. Inspections shall be written procedures by tD cv O C N C 0 Z Ol CV 0 Quality Procedures and Quality Instructions shall be written which delineate-the requirements and, responsibilities for the performance of inspections. TOPICAL QUALITY ASSURANCE REPORT TQR 10.0 INSPECTION Rev.8 Date" gay 10;1988 Page 3 of 5 10.2.2 Inspection Plans and Schedules Documented inspection plans may be either a separate document or an integral part of work instruction documents. The plans shall be based on design specifications, procurement documents, drawings, other specifications or previous experience, as appropriate. Inspections shall be scheduled to assure that sufficient time and resources are available, and to assure inspections are not inadvertently omitted or bypassed.10.2.3 Inspection Personnel'~Inspections shall be performed by individuals other than those who performed or directly supervised the activity being inspected. Inspection personnel shall be qualified and certified in accordance with appropriate codes, standards and/or company training programs.Qualifications and certifications shall be kept current.b.Prior to performing inspections, inspection personnel shall have access to the drawings, procedures, specifications or other documented criteria necessary for performance of the inspection. 10.2.4 Inspection Procedures ED CV Required inspection, surveillance or monitoring activities shall be performed and documented according to written, approved instructions or procedures. Inspection procedures, instructions or checklists shall contain the following: el C 0 z Ol Ol E 0'LL TOPICAL QUALITY ASKJBANCE REPORT TQR 10.0 INSPECTION Rev.Date May 10, 19SS Page 4 of 5 10.2.4 Inspections Procedures (Cont'd)o 0 o 0 Identification of characteristics to be inspected; Identification of the individual or groups responsible for performing the inspection; Acceptance 'criteria or reference to the acceptance criteria;A description of the method of inspection; Verification of completion and certification of inspection. b.Inspection records shall identify: o Inspector or data recorder;0 0 o o Method or type of observations; Test or inspection results;Statement of acceptability; Date of observation; Deficiencies and nonconformances, and the action taken in connection with these deficient conditions, either by inclusion or by reference to other documents. co Inspection procedures shall be reviewed by QC personnel to determine the need for an independent inspection and the degree and method if such an inspection is required, and to assure the identif ication of inspect'ion personnel and the method of documentation of inspection results.Cl N D C 5 C 0 2 Ol CII 0 4 d.Written approved instructions shall specify surveillance or monitoring of processing methods, or testing and operation of equipment when inspection is impossible, inaccessible or not applicable. TOPICAL QUALITY ASSURANCE REPORT TQ INSPECTION Rev.Oate May 10, Page 5 of 5 10.2.4 Inspections Procedures (Cont'd)e.Modification, repair, replacement or rework items shall be inspected in accordance with original inspection requirements or acceptable alternatives. 10.2.5 Inspection, Witness, and Hold Point Identification Appropriate inspection, witness or hold points shall appear in process documents (e.g., construction, testing, operating and maintenance procedures). These process procedures are subject to the review of the appropriate Quality Control organization for adequacy of inspection, witness, and hold points.Mandatory hold points shall be used when witnessing and inspecting must be performed and signed-off by the responsible personnel before work can proceed.FPL shall indicate FPL witness or hold points applicable during the manufacture of an item in procurement documents. A distinction shall be made between witness points and mandatory hold points.ID CO cv C 0 Z Ol CII C 0 U

TOPICAL QUALITY ASSURANCE REPORT TQR 11.0 FLORIDA POWER 5 LIGHT COMPANY TEST CONTROL Rev.2 3une 19, 1986 Page 1 Gf 3 11.1 GENERAL RE UIREMENTS A test program shall be established to assure that testing required to demonstrate that structures, systems and components will perform satisfactorily in service is identified, accomplished, and documented in accordance with written procedures. The test program shall include, as appropriate, proof tests, prior to installation, pre'operational tests, start-up tests, and operational tests, and retest following repairs, replacements or modifications. 11.2 IMPLEMENTATION 11.2.1 Test Program Testing requirements shall be identified in the engineering/design documents, SAR documents, procedures, or procurement documents, as appropriate. Retest following repairs, repla'cements, or modifications shall be performed in accordance with the original design and test requirements or acceptable alternatives. Retest shall'be performed when the original test results are invalidated. Quality Procedures and Quality Instructions shall be written which delineate the methods and responsibilities for controlling, accomplishing, and documenting testing.FPL may delegate the implementation of all or any part of the test program to other organizations but shall retain ultimate responsibility for the program.The contractor shall be required to control, perform and evaluate tests in accordance with written procedures and shall be required to prepare a written test program detailing the testing required. TOPICAL QUALITY ASSURANCE REPORT TQR 11.0 FLORIDA POWER k LIGHT COMPANY TEST CONTROLRev.2 oate 3une 10, 1986 Page 2 of 3 11.2.2 Test Procedure Preparation and Test Performance Testing shall be accomplished in accordance with written approved test procedures which incorporate or reference the requirements and acceptance limits in the applicable design and procurement documents. The test procedure or test program'documents shall include the following as a minimum: a.Instructions for the testing method used;b.Required test equipment and instrumentation; c.Test requirements and acceptance criteria;d.Hold, witness, inspection and data collection points;e.Test prerequisites such as: calibrated instrumentation; trained, qualified, and licensed or certified personnel; preparation, condition and completeness of item to be tested;suitable and controlled environmental conditions. f.Methods for documenting or recording test data and results;g.Test records shall identify: 1)Inspector or data recorder;2)Method or type of observations; 3)Test or inspection results;0)Statement of acceptability;

TOPICAL QUALITY ASSURANCE REPORT TQR 11.0 Rev.FLORIDA POWER&LIGHT COMPANY TEST CONTROL Date 3une[0, 1936 Page 3 Of.3 11.2.2 Test Procedure and Test Performance (Cont'd)0)Date of observation; and 6)Deficiencies and nonconformances, and the action taken in connection with'hese deficient conditions, either by inclusion or by reference to other documents. 11.2.3 Evaluation of Test Results The documented test results shall be evaluated against the predetermined acceptance criteria by a group or individual having appropriate qualifications. The acceptance status of the test shall be documented. Deficiencies noted during the evaluation shall be documented and dispositioned in accordance with approved Quality Procedures or Quality Instructions. The evaluation of the test results may be delegated to other organizations; however, FPL shall retain the responsibility for the evaluation. The evaluating organization shall be required to use qualified personnel, evaluate the data against predetermined criteria, and document the results of the evaluation and acceptance status of the test. TOPICAL'QUALITY ASSURANCE REPORT R ev.T R 120 FLORIDA POWER 8 LIGHT COMPANY CONTROL OF MEASURING AND TEST.EQUIPMENT Date 3une 10,'1985 Page I of 12.1 GENERAL RE UIREMENTS Tools, gauges, and other measuring and testing equipment used as the basis for acceptance in activities affecting quality shall be properly controlled, periodically calibrated, and adjusted to assure that accuracy is maintained within limits necessary to verify that design requirements have been met.It is the responsibility of each department maintaining calibrated instruments to provide for the calibration and control of such instruments. 12.2 IMPLEMENTATION 12.2.1 Control of Measuring and Test Equipment Procedures shall be written to delineate the methods and responsibilities for the control, maintenance, and calibration of measuring and test equipment (MATE).MRTE control procedures or calibration program documents shall contain the following: a.A listing of MRTE to be controlled; b.Frequency of calibration of listed MRTE.The frequency may be based on calendar time or relate to usage, and be based on such factors as experience, inherent stability, instrument purpose, or accuracy.required;c.A method for controlling issue and recall of portable MdcTE;d.A method to identify controlled MRTE (e.g., labeling)required calibration frequency and calibration test data applicable to the MATE;e.Method to document and maintain the status of MRTE.Vl C O Z tb A e 0 4 TOPICAL QUALITY ASSURANCE REPORT Rev.T R 120 3, FLORIDA POWER 4 LIGHT COMPANY CONTROL OF MEASURING AND TEST EQUIPMENT Date 3une 10, 1985 Page of 12.2.1 Control of Measuring and Test Equipment (Cont'd)FPL may delegate the control and/or calibration of MATE to other organizations. FPL, however, retains ultimate responsibility-for control and'calibration, and the contractor shall meet the requirements of this TQR or an acceptable alternative'program as required by the procurement document for the contracted services.12.2.2 Calibration Procedure MdcTE shall be calibrated in accordance with written approved procedures. 'The calibration procedures shall contain, as a minimum: a.Identity of MItcTE to which the procedure applies;b.Calibration equipment and reference standards to be used;c.Acceptance criteria;d.Sequence of operations and special instructions; e.Documentation and data collection requirements; f.A requirement that MRTE be checked and results recorded before adjustments or repairs are made;g.Calibration f requency required.V)C O Z Ol A e 0 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 12.0 FLORIDA POWFR 4 LIGHT COMPANY CONTROL OF MEASURING AND TEST EQUIPMENT 3une 10,'1935 Page 3 Of 12.2.3 Calibration Standards MRTE shall be calibrated using reference standards whose calibration has a known, documented, valid relationship to nationally recognized standards or accepted values of natural physical constants. If no national standard exists, the basis for calibration shall be documented. Standards and reference standards shall have an accuracy level, range and stability which are adequate to verify that the equipment being calibrated is within tolerance and adequate for the programmatic requirements of the equipment being calibrated. MdcTE shall be calibrated against working standards having an accuracy of at.least four times the required accuracy of the equipment being calibrated. When this is not practical, working standards shall have an accuracy that assures that the MRTE being calibrated will be within required accuracy tolerances and that the basis of acceptance is documented and authorized by designated responsible management. The meaning of this paragraph may be diagrammed as follows: NATIONAL BUREAU OF STANDARDS (NBS)/NBS Certified Laboratory"greater than" tolerance PRIMARY STANDARD (if applicable)"greater than" tolerance SECONDARY STA'NDARD (if applicable)"greater than" tolerance WORKING STAN DARD"IA ratio" tolerance (except as noted above)MdrTE (installed instruments and measuring and test equipment used for inspection, maintenance, etc.) TOPICAL QUALITY ASSURANCE REPORT Rev.T R 120 FLORIDA POWER i LIGHT COMPANY CONTROL OF MEASURING AND TEST EQUIPMENT Date 3une 10, 1985 Page Qf 12.2.3 (Cont'd)The accuracies of MRTE and reference standards shall be chosen such that the equipment being calibrated can be calibrated and maintained within the required tolerances. 12.2.0"Out of Tolerance" Control MdcTE and reference standards, when found out of tolerance, shall be so identified and removed from service.An investigation shall be conducted to determine the validity of previous inspection or test results gained through use of the instrument,'and of the acceptability of items previously inspected or tested. TOPICAL QUALITY ASSUIVLHCE REPORT TQR 13.0 HANDLING, STORAGE AND SHIPPING Rev.June 24;1988 Page 1 of 2 13.1 GENERAL BE UIBI969FZS Written instructions, or procedures shall be established and implemented for the cleaning, shipping, storage, preservation, packaging, and handling of specified items.These instructions and procedures shall delineate measures which prevent degrading an item through damage or deterioration. When necessary for particular products, special protective environments such as inert gas atmosphere, specific moisture content levels, and temperature levels shall be specified and provided.13.2 13.2.1 General a Instructions or procedures shall be written to define the requirements and responsibilities for the cleaning, packaging, preservation, handling, storage, and shipping of equipment and material, and shall require implementation of the established design and specif ication requirements by personnel having appropri ate qualifications. FPL may delegate any portion of the responsibility for handling, storage and shipping of material and equipment, but shall retain ultimate responsibility. Where any of the functions in the section which follow is delegated to a contractor, the contractor shall be required to adhere to the FPL requirements stated herein.C 0 Z Ol~V Ol F.0 U TOPICAL QUALITY ASSUKLNCE REPORT TQR 13.0 HANDLING, STORAGE AND SHIPPING Rev.Date June 24,].988 Page 2 of 2 13.2.3 Handling, Storage, and Shipping Procedures Materials and equipment which are to be incorporated into a safety-related system of a nuclear power plant shall be handled, stored, and shipped in accordance with written procedures, where necessary, to implement the design document and purchase order requirements. These procedures shall assure that cleaning, handling, storing, packaging, shipping, and preserving materials, components and systems will preclude damage, loss, or deterioration by environmental conditions, such as temperature or humidity.The preparation and/or implementation of these procedures may be delegated to other organizations, but FPL shall retain the ultimate responsibility for proper material handling, storage, and shipping.13.2.4 Verification of Proper Handling, Storage, and Shipping.The Quality Assurance Department shall be responsible for verification of proper handling, storage and shipping at vendor facilities. The Plant Manager and the gualitT Assurance Department shall be responsible for verification of proper handling,'torage, and shipping at the plant.'0's e J ll 0 Z Ol fs E 0 TOPICAL QUALITY ASSURANCE REPORT TQR 10.0 R ev.6 FLORIDA POWE'R 8 LIGHT COMPANY INSPECTION, TEST, AND OPERATING STATUS Date 3une 10;1986 Page l of 2 10.1 GENERAL RE UIREMENTS Measures shall be established to indicate by the use of markings such as stamps, tags, labels, routing cards or other suitable means, the status of inspections and tests performed on material, equipment, or systems.These measures shall provide for the identification of items which have satisfactorily passed required inspections and tests.Measures shall also be established, for indicating the operating status of structures, systems and components to prevent inadvertent operations. 10.2 IMPLEMENTATION 10.2.1 General For operations activities, the Nuclear Energy Department is responsible for establishment and maintenance of a suitable system for identifying the inspection, test, and operating status of materials, equipment, systems, and s components. For plant modifications assigned to Project Management Department or when requested by the Plant Manager, the Project Site Manager is responsible for establishing a suitable system for identifying, inspecting and testing for material, equipment, systems and components which is approved by Nuclear Energy Department. Each system shall be established, implemented and maintained in accordance with written Quality Procedures and Quality Instructions. The Architect/Engineer or Contractors shall develop and implement procedures to comply with contractual responsibilities, and applicable codes, standards, specifications, and criteria governing the status identification of procurement items being tested, installed,.or fabricated. The Architect/Engineer (where applicable), suppliers and contractors shall be required to maintain a system for identifying the inspection, test and processing status of materials, parts, and TOPICAL QUALITY ASSURANCE REPORT TQR I 0.0 R ev.'LORIDA POWER 4 LIGHT COMPANY INSPECTION~ TEST~AND OPERATING STATUS 3une 10, 1986 Pege 2 of L0.2.L General (cont'd)components. Elements of this system require that suppliers and contractors have a controlled manufacturing and test operation in order to preclude the inadvertent bypassing of processing, inspections or test, and to provide a positive identification of component status throughout all phases of manufacturing, testing, and inspecting, by means of tagging, routing cards, stamping, manufacturing or test reports, labeling or other appropriate methods.The Vice Presidents -Turkey Point or St.Lucie and the Quality Assurance Department shall verify adequacy of the controls established and implemented, as appropriate for their site.L 0.2.2 Status Identification and Control Quality Procedures and Quality Instructions shall describe control of the application and removaL of markings such as stamps, tags, labels, routing cards, and other suitable means to indicate the status of non-operational, nonconforming, or malfunctioning nuclear safety related structures, systems and components to prevent inadvertent operation, and to prevent omission of inspections, tests, or other critical operations. These procedures and instructions shall delineate the requirements, methods and responsibilities for indicating the status of the affected items.These procedures will clearly delineate the individuals or groups responsible for application and removal of status indicators. < TOPICAL QUALITY ASSURANCE REPORT TQR 15.0 NONCONFORMING MATERIALS, PARTS OR COMPONENTS Rev.Date October 27, 1988 Page 1 of 15.1 GENERAL RE UIREMENTS Measures shall be established to control materials, parts, or components which do not conform to requirements in order to prevent their inadvertent use or installation. These measures shall include, as appropriate, procedures for identification, documentation, segregation, disposition and notification to affected organizations. Nonconforming items shall be reviewed and accepted, rejected, repaired or-reworked in accordance-with documented procedures. 15.2 IMPIBDKNTATION 15.2.1 Program Quality Procedures and Quality Instructions shall define the responsibilities and methods for identifying, documenting, segregating and dispositioning nonconforming items.For procedure'eview requirements, see TQR 2.0 and TQR 5.0.Each department shall be responsible for the identification, control and disposition of nonconformances within the scope of their departmental responsibilities. Throughout plant life FPL may delegate any portion of the identification and control of nonconforming items and services to an Architect/Engineer (A/E),, constructor, NSSS vendor or other contractors. In any case, FPL retains the responsibility for assuring that requirements are ,met, and shall assure that the contractor's actions conform to requirements set by, FPL;.Vl C 0 Z Ol CV 6 0 TOPICAL QUALITY ASSURANCE REPORT TQR 15.0 NONCONFORMING MATERIALS, PARTS OR COMPONENTS Rev.Da<<October 27, 198 Page 2 of 4 15.2.2 Documenting and Controlling Nonconformances All nonconformances'n safety related items shall be documented and reported for corrective action.Measures shall be delineated in Quality Procedures and Quality Instructions which control further processing, installation, or operation of nonconforming items.These measures shall include: a.Physical identification of the item as nonconforming. b;Segregation of nonconforming items until properly dispositioned. Where physical segregation is not practical, suitable tags, marking or documentation shall be used to assure control.15.2.3 Documentation A Documentation of the nonconforming item shall: identify the item;describe the nonconformance; show disposition of the nonconformance and inspection requirements; and include the signature of the person approving the disposition. 15.2.4 Evaluation and Disposition lO N CC vl C 0 Z Ol C4 E 0 r Nuclear Engineering, Nuclear Fuel, Nuclear Energy or the delegated contractor organization, as specified by procedure, sha3.1 evaluate nonconformances and disposition them based on the results of the evaluations. These evaluations and dispositions shall be reviewed, approved and documented in accordance with procedures. TOPICAL QUALITY ASKJRANCE REPORT TQR 15.0 NONCONFORMING MATERIALS r PARTS OR COMPONENTS Rev.Date October-27, 1988 Page 3 of 4 15.2.4 Evaluation and Disposition (Cont'd)An evaluation to determine the disposition of nonconforming items shall be performed. The evaluation shall determine whether an item is.to be accepted as-is, repaired, reworked or rejected.A technical, evaluation shall be performed when an item is accepted as-is or is repaired to an acceptable condition. Records of the disposition of these items shall be made part of the nonconformance report.This evaluation shall assure that the final condition does not adversely, effect safety, operability or maintainability of the item, or of the component or system in which it is installed; The A/E, or other contractors on-site, shall be required to inform the FPL Construction Management or Nuclear Energy Department prior to use or installation of a nonconforming item.The nature and extent of a nonconformance and the reason for proposing its use or installation shall be justified. Nonconforming items dispositioned"accept as-is", or repaired to an acceptable condition, shall'e so identified. Nonconformance reports for those items shall be made part of the item records and forwarded with the material to FPL.The, determination of the need and the advisability of releasing nonconforming materials or items, is made by the Nuclear Engineering, Construction Management or Nuclear Energy Departments. The following factors may, be appropriate considerations in making this determination: a.Effect on the orderly progress of work if material or items are released;r b.Safety of personnel; vl C 0 z Ol cv E 0 4 TOPICAL QUALITY ASKHULNCE REPORT TQR 15.0 Rev..8, NONCONFORMING MATERIALS, PARTS OR COMPONENTS Date October 27, 198 Page 4 of 4 15.2.4 Evaluation and Disposition (Cont'd)c~d.e.Suitability of material or items in"as-is" condition, i.e., probability of eventual satisfactory resolution of the nonconformance without repair, rework, or replacement; Accessibility of material or items after release;Cost of removal and repair of,.replacement should material or items eventually have to be removed, repaired, or replaced;Impact on plant safety.Items shall be reworked or repaired in accordance with documented procedures and shall be verified by reinspecting the item as originally inspected or by a documented method which is at least equal, to the original inspection method.Quality Assurance or Quality Control personnel shall periodically review nonconformance reports to identify quality trends.The results of these analyses shall be reviewed with appropriate members of upper level management. Cl CIL a Vl C e Z C4 0 TOPICAL QUALITY ASSURANCE REPORT 7QR 16.0 Rev.5 FLORIOA POWER a LIGHT COMPANY CORRECTIVE ACTION DaIe 3une 10 1936 Page 1 Df 3 16.1 GENERAL RE UIREMENTS 4 Documented measures shall be'used to assure that conditions adverse to quality such as failures, malfunctions, deficiencies, deviations, defective material and equipment, and nonconformances, are promptly identified and corrected as soon as practicable. In the case of significant conditions adverse to quality, the cause of the condition shall be determined and action taken to preclude repetition. The identification of significant conditions adverse to quality, the cause of the condition, and the corrective action taken shall be documented and reported to appropriate levels of management. 16.2 IMPLEMENTATION 16.2.1 Corrective Action and Follow-Up Quality Procedures and Quality Instructions shall define responsibilities and methods for identifying and correcting conditions adverse to quality.When an adverse condition is detected, a determination shall be made by plant supervision, Quality Control, or Quality Assurance personnel as to whether immediate or routine corrective action is required.ao"Immediate Corr'ective Action" applies to conditions which pose a threat to plant safety or to the health and safety of the public, which could result in major equipment and material damage, or could, if not corrected, produce defects of significantly greater consequences than those immediately resulting from the condition."Immediate Corrective Action" is accomplished through stop-work requests/orders 'o appropriate levels of management, requiring that work be stopped, the plant be shut down or other appropriate actions be taken.Z A e 0 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR l 6.0 FLORIDA POWER 5 LIGHT COMPANY CORRECTIVE ACTION Date June IO 19 Page 2 of 3 16.2.l Corrective Action and Follow-Vp (Cont'd)b."Routine Corrective Action" applies to conditions which do not require immediate corrective action.Routine corrective action is assured through the distribution and disposition associated with inspection reports, surveillance reports, nonconformance r'eports, and audit reports;and the investigation analysis and action associated with reportable conditions. Follow-up to verify implementation of'corrective action and close-out of corrective action documentation is accomplished by the QA or QC organization responsible for verifying the corrective action.The Quality Assurance Department shall track,'follow-up, and close-out open items identified by QA Department audits and vendor surveillances. The respective department or plant shall track those items charged to its operating license by the NRC.Each department shall be responsible for follow-up and close-out of corrective action resulting from their departmental inspections, tests, or operations. If corrective action is inadequate or not timely, the follow-up organization shall request corrective action from management, as~delineated in procedures. The Quality Assurance Committee is the final authority in the event that agreement is not reached at lower levels regarding stop work requests or other corrective action.Where corrective 'action is required of contractor personnel, FPL shall define in procedures and contracts the corrective action interface between FPL and the contractor. FPL shall require the A/E, NSSS vendor, constructor and other suppliers of safety related ma'terials and services to have a documented corrective action system.Vl 8 Z Ol CI~e a TOPICAL QUALITY ASSURANCE REPORT TQR 16.0 FLORIOA POWER 4 LIGHT COMPANY CORRECTIVE ACTION R ev.Date June-10, 1936 Page 3 of 3 16.2.2 Recurrence Control It is the responsibility of the organization which identifies the significant condition adverse to quality to verify that corrective action description not only corrects the immediate condition, but also precludes the con'dition from recurring, The organization(s) that provide(s) the corrective action disposition and implementation is responsible to assure that the corrective action taken not only corrects the immediate condition, but also precludes recurrence. 16.2.3 Incidents and Reportable Occurrences Reporting Operating Reportable Occurrences and reports of incidents shall be investigated, documented as to cause and corrective action, and reported to the NRC in accordance with the applicable plant Technical Specifications. Reportable Occurrences and reports of incidents that result in damage or are otherwise safety related, shall be forwarded to the Company Nuclear Review Board (CNRB)for review.Conditions adverse to quality are'reported to operating plant management through: distribution of QA audit reports, QC inspection reports, corrective action requests, and the investigation and reporting of Reportable Occurrences in accordance with plant Technical Specifications. C 0 2 Cb e 0 U

TOPICAL QUALITY ASSURANCE REPORT TQR 17.0 FLORIDA POWER I LtGHT COMPANY QUALITY ASSURANCE RECORDS Rev.2 h Date 3une 10, 1986 Page 1 Df 2 17.1 GENERAL RE UIREMENTS Sufficient records shall be maintained to furnish documented evidence of the quality of safety related structures, systems, and components, and of activities affecting their quality.The records shall include, as appropriate, data such as qualifications of personnel,. procedures, and equipment; and other documentation such as inspection or test acceptance criteria, and the action taken in connection with deficiencies noted during inspection. The records required to furnish documentary evidence of quality, herein called quality assurance records, shall be identifiable and retrievable. These records shall be maintained in facilities that provide a suitable environment to minimize deterioration or damage and to prevent loss.The requirements and responsibilities for quality assurance record control, transmittal, retention, and maintenance shall be established and documented. These record requirements shall be consistent with applicable design, manufacturing, and installation codes and standards, and with procurement document requirements. 17.2 IMPLEMENTATION 17.2.1 Records Identification Quality Procedures shall define the quality assurance records necessary to furnish documentary evidence of the quality of safety related structures, systems, and components; and activities affecting quality.These records shall include plant operating logs;results of design reviews, inspections, 4 tests, audits, and material analyses;qualification of personnel, procedures, and equipment; design records such as drawings and specifications; procurement documents; calibration records;and nonconformance or corrective action reports.Ol CI~E 0 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 17.0 FLORIDA POWER 5 LIGHT COMPANY QUALITY ASSURANCE RECORDS 3une 1P'193 Page 2 of 17.2.2 Responsibilities Responsibilities shall be established and documented for the control, transfer, maintenance, and retention of quality assurance records.Quality Procedures shall provide guidance for determining the retention requirements of quality assurance records.Each organization responsible for the conduct of a quality activity shall be responsible for the maintenance of the subsequent quality assurance records unless retention responsibilities have been transferred by a prearranged agreement. In any case, the organization initiating the quality assurance records shall be responsible for their validity and approval.17.2.3 Retrieval Quality Procedures shall require that quality assurance records submitted for retention be legible, completely filled out, and adequately identifiable and retrievable for each item.The records shall be filed in the storage area or facility using a documented system to provide retrievability. Quality Procedures additionally require control of corrections and supplements issued for quality assurance records that are previously approved and filed', and that documented methods for control and accountability of records removed from the storage area be instituted. 17.2.0 Storage Specified in the Quality Procedures are the construction features and location requirements for record storage facilities which assure that quality assurance records are protected from possible destruction by causes such as fire, flooding, theft, tornadoes, insects, rodents, and from possible deterioration by a combination of extreme variations in temperature and humidity.Specific instructions regarding the storage area are given for special processed records and for temporary storage facilities. TOPICAL QUALITY ASSURANCE REPORT TQR 18.0 FLORIDA POWER S LIGHT COMPANY AUDITS Rev.Date 3une'0, 1986 Page 1 of 5 18.1 GENERAL RE UIREMENTS A comprehensive'ystem of planned and periodic audits shall be carried out to verify compliance with all aspects of the quality assurance program and to determine the effectiveness of the program.The audits shall be performed in accordance with the written procedures or checklists by appropriately trained personnel not having direct responsibilities in the areas being audited.Audit results shall be documented and reviewed by management having responsibility in the area audited.Follow-up action, including reaudit of deficient areas,.shall be taken, where necessary. 18.2 IMPLEMENTATION A comprehensive program of audits is carried out by the Quality Assurance Department during the design, procurement, construction, and operations phase of nuclear power plants.These audits are performed to verify that all safety'related activities associated with nuclear power plants are carried out in accordance with the requirements of the FPL QA Program, and that the implementation is ef f ective.18.2.1 Personnel Quality Procedures provide instructions for the training of QA Department personnel who perform audit activities, to assure that they are adequately I indoctrinated and trained, and that they are qualified to carry out these activities. Quality Procedures provide for personnel qualified as Lead Auditors to be formally certified by Quality Assurance Department management. Certification shall be based on education, experience, training and other specified criteria. TOPICAL QUALITY ASSURANCE REPORT TQR 18.0 Rev.FLORIDA POWER 4 LIGHT COMPANY AUDITS 3une l0 I936 Page 2 of 5 l8.2.2 Planning and Scheduling Quality Procedures and Quality Instructions provide requirements for written audit plans and schedules. The audits are planned and scheduled on the basis of the following requirements, as appropriate: a.Activities shall be audited as early in their life as practicable. Auditing shall be initiated early enough to assure effective quality assurance during the design, procurement and contracting activities. b.Applicable elements of the internal and on-site QA Programs shall be audited at least once every two years during the operation phase of plant life following initial fuel loading.For other plants'hases, the applicable elements shall be audited at least once every year or once within the life of a quality related activity, whichever is shorter.c.An annual evaluation of suppliers'uality performance history shall be performed to determine reaudit requirements. Reaudit requirements for suppliers shall be based on the supplier's quality performance and the complexity and criticality of the equipment or service being procured.A facility evaluation (audit)will be performed at least every three years and shall be conducted in accordance with Quality Procedures and Quality Instructions for supplier evaluations. d.Audits shall be regularly scHeduled for on-going activities. e.Regularly scheduled audits shall be supplemented, as required to cover unforeseen events or changes in requirements. Cl CO u3 Vl C O Z th P N a 0 The scope of audit activities shall include, as a minimum: TOPICAL QUALITY ASSURANCE REPORT TQR I 3.0 FLORIDA POWER 4 LIGHT COMPANY AUDITS Rev.3une'IO, l986 Page 3 of IS.2.2 Planning and Scheduling (Cont'd)a.The determination of site features which affect plant safety (e.g., core sampling, site preparation, and meteorology). b.The preparation, review, approval, and control of the SAR, designs, specifications, procurement documents, instructions, procedures, and drawings.c.Evaluation of bids.d.Indoctrination and training programs.e.Receiving and plant inspections. f.Operation, maintenance/repair and modification. g.The implementation of operating and test procedures. h.All criteria in Appendix 8 to 10 CFR Part 50.i.Validity of Certificates of Conformance. External audits shall be performed by the Quality Assurance Department on Architect/Engineers, NSSS'endors, constructors, and other suppliers of safety related materials and services to evaluatetheir QA programs, procedures and activities. Procurement documents require that FPL suppliers and contractors in turn perform audits on their sub-tier suppliers and contractors. 0 Vl 8 Z Ol e 0 4 TOPICAL QUALITY ASSURANCE REPORT TQR l8.0 Rev.FLORIDA POWER 4 LIGHT COMPANY AUDITS 3une lo, 1986 Page g of 5 18.2.3 Conduct of Audits Quality Procedures and Quality-Instructions shall delineate requirements for the conduct of audits.These procedures and instructions shall require that: a.Audits be conducted by trained and qualified personnel. b.Personnel conducting audits shall not have direct responsibility in the area audited.c.Checklists or procedures shall be used to ensure depth and continuity of audits.d.Objective evidence shall be examined for compliance with quality assurance program requirements. This shall include examination of procedures and activities to assure that documented objective evidence is meaningful and in compliance with the overall Quality Assurance Program.e.Audits shall include evaluation of work areas, activities, processes and items;and the review of documents and records.18.2.0 Reporting of Audit Findings Audit findings shall be documerited in written reports.Audit reports shall be distributed to the responsible management of the audited FPL organization within thirty calendar days after completion of the audit.D 4t CO C 0?Cb I cv C 0 U TOPICAL QUALITY ASSURANCE REPORT TQR 18.0 FLORIDA POWER a LIGHT COMPANY AUDITS Rev.Date 3une 10, 1986 Page 5 of 5 18.2.5 Follow-up Responsible management of the audited organization shall take action to'orrect the deficiencies identified in the audit report and provide a written response within thirty calendar days af ter receipt of the report.This response shall include action taken and/or planned to correct deficiencies and to prevent recurrence of the deficiencies, and commitment dates for actions not yet complete.The mechanism for evaluation and follow-up of corrective action is described in TQR 16.0.The status of correction of deficiencies shall be followed until the corrective actions have been accomplished and verified.18.2.6 Reports to Management Quality'Assurance Program status reports are periodically prepared by the QA Department and routed to the members of the QA Committee for their review.This status report summarizes the results of QA Department audit activities for the period, keeps all Committee members apprised of current conditions and program ef fectiveness, and when necessary, directs management attention to significant trends and problems.V)S Z OL A e 0 l4 0 SII(VICE PRtSOENI TURKEY RON NUCLEAR SERAC(5 NAIHC(R NUCLEAR SR(PROVE(I HANAC(R ENON((RWC PRCVECT HANACER SAFETY (VALUATION CROVP CIWRNAN lf AO CONSIRVCTCN SLP(RVI5OR l(AO HAIAROCUS CTASTE CCCROPHTOR PIANI NVCL EAR SAY(TY CONLATT(t SIANVP 9IP(RINTENOf NT PRR(CT CONT ROI.SUPE RVISCR TECHIACAL CEPARTN(N SLP(RASOR TRNNNC SUPERWIEN((NI PRS ASST.5VP(INNTENOf Nl H(ALIH PHY9CS SVP(RASOR OPERATIONS TRAHHC SUPERVISOR ASSI.IWNT f NANCf SVP(RPII (AC(NT REACTCR (NTANE(RS'IRNNNC 9PPCRT OPS/MNNT COOROPIAIOR ALARA/SUPP.SUP(RHSOR PLAN SVPERASOR NUCLEAR (SRO)NAAIT./SPEC.TRNNHC SVPERVISCR H(A(TH PHI9CS CPERATENS EN(RCENCY PLAN COCRO NUCl(AR NAI(H ENCW(ER (SRO)OPERATIONS A595IAN SVP(RWT EIAX N N(CHAIPCAL IWNT (NANCE HEALTH PHI9CS 5(NCR f NCW([R ERCAOS CPERAICNAL (NOH(ER NVCL(AR CONTROl Cf NER OPERATOR (RO A5951ANI SVP(ANT(TO(HI (lCCTTNCAL HNNI(NANCE CPS ENON(ER OAIA PROKSSHC OPERATOR VAI(R IREATN(N PLAN COORCPIAIOR AS95IANI SUP(NNIEIC(N PTAS EO IWNIfNINCf (KRCENCY PLAAPIHC I(OI.TOPICAL OUALITY ASSURANCE REPORT TURKEY POINT NUCLEAR SITE ORGANIZATION FIGURE 1-2 APPENOIX A OAT(I 0-$-6$PACE I OT I

t YEOIT IV[VICE PR[56[NT MCE PRESCEN CORPORAT[5tRNC[5 ANO OI[f fINANCW, OFFICER IXWllf ASS%ANCE CORRI 1[[ORECTOR Of pRCCUR[uf N a IMTE RUE NANACE OR[CTOR Cf FV[l RESOURCES IMNACf R OF PONER FLAN PUROM5WC CORPORATf SECRETARY UANAC[R Of NUCLEAR FV[L SIT[UC[PRE SCEN 51.LUCE IMNAC[R Cf INVE NORF RESOURCE 5 NANAC[R Of COPORAIE R[COROS S[RMCES WRAC[R Of FUEL 5[RVC[5 SPEOAC SRE ORCAN[ATCN WFIC.I 2 SPEOFIC SFIE ORGAN/AION WFIC.T)R NVCLE IRNNNO IWIACf R OF PONER PLANT SIORtS SVP[RVISCR Cf OOCUUEN ART f RES OR[CICR POwER SIPPlY PRTUECI'TEAN SVP[RNEIO[N OL SI.lUOE R NUCLE[N[ROY WWT[NANCE IMNACER Of CORPOME CONTRACIS~'ANIC[R SIST[M PROIECICTN IMNACf R OUAUIY SSVRANCE SERVICES R NVClt f N[RCY SERMC[S COMPANY EIMRONU[NTAL REVET CROP WNCfR OF ENVRCNNE NIAL TECHNICAL SERVCE 5 MANACOI OF POw[R SUPPLY TEOfeCAL Sf RVCE 5 IWIACER CONSIRUCION OC, wtlOwC ANO IOE OUAUIY ASSURANCE PROCRW R[UOI CCLAA[If t ORf CTOR NUCLEAR f NCPC f RWO IMIMCER Of ENARONN[NAL Rf SOURc[s a PVUwwC IWIACE R Of f NVIIONllf NAL P[RIATIWC AICI PROCRANS SIAFF OC COOROIMIOR IO[1[V[i~SUPE RVISOR'w[LOWC 5VPfRWT[NO[NI TOPICAL QUALITY ASSURANCE REPORT ORGANIZATION OF DEPARTMENTS AFFECTING QUALITY FIGURE I-I APPENDIX A R[V.15 6/9/69 PACE I Cf I 9TC VICf PR(9QENT Sl.LVCTE SE RIACCS HANACER 9TC CNCANECRINC 5VPERVISQR Pl@HECT OVAIIN CONTROL SVPE VISOR LCAO CONSTAVCTIQN 9IPCRVISOR ACAAMSTRATAE SVPCRVISOR FRC PROTECTQN SVPERIISQR CPC RAT CNS SVPEAINT l IOENt Tf CIPACAL OEPARI VENT SVPE RVISCR HEALTH PHT9CS SVPC RVISCR O ERATCNS SVPERVISQR AOHNtST RATIVC COQRQNA TON SVPC RVISQR SVPERVI5QR (SRQ)PRIHARES/VQNITOR$SVPERVISOR A59$TANT SVPERINIENCENt ACCHAMCAL IIANT f NANCE REACTOR TECIFIICIAN AS95TANT NVClCAR PLANT SU%5NR (SRO)SECOIATNICS/ CNVTIQNLEHTAL 4 AOHPAgRATNC SVKR45N PLAHl TEST CROVP AS9$TANT 9PERTNICNOENT f LECTIVCAL'lAPITC NANCf HEALTH PHI9CS TECNHCAL SV PC RVISOR CONTROL OPERATCR (RQ)APPCIOT l/CQVNTPIQ ROON/HA9C SVPC RIISQR VNVCC NSE 0 OPf RATQR5 WTP/STP POLISKR TOPICAL OUALITY ASSURANCE REPORT ST.LUCIE PLANT.UNITS 1 0 2 SITE ORGANIZATION FIGURE 1-3 APPENDIX A OAT(: 0-$89 PACC I Ot I TOPICAL QUALITY ASSURANCE REPORT R ev.FLORIDA POWER 8 LIGHT COMPANY QUALIFICATION AND EXPERIENCE REQUIREMENTS FOR FPL'QUALITY ASSURANCE PERSONNEL Date 3une 10 1986 Page of 1 TITLE Manager of Quality Assurance Services and Superintendents -QA EDUCATION AND BACKGROUND EXPERIENCE+ Shall satisfy the following set of Fequirements: Graduate of a four year accredited engineering or science college or university, plus seven years of industrial experience, including five (3)years in positions of leadership such as lead engineer, project engineer, audit team leader, etc.At least two (2)years of this five (5)years experience shall be nuclear power plant experience in the implementation of the Quality Assurance Program.Six (6)months of the two (2)years experience shall be obtained within a Quality Assurance organization. A masters degree in engineering or business management is considered equivalent to two (2)years of general industry experience. Assistant Manager of Quality Assurance Shall satisfy one of the following sets of requirements: Graduate of a four year accredited engineering or science college or university, plus seven years of industrial experience including three years in positions of leadership, such as lead engineer, project engineer, audit team leader, etc.At least two years of this experience should be associated with nuclear facilities. A masters degree in engineering or business management is considered equivalent to two years of experience. Completion of college level work leading to an associates degree in a related discipline plus fifteen years of industrial experience including three years in positions of leadership, such as project engineer, audit team leader, supervisor, etc.At least five years of this experience should be associated with nuclear facilities. High school graduate, plus twenty years of industrial experience, including three years of positions of leadership, such as project engineer, audit team leader, supervisor, etc.At least five years of this experience should be associated with nuclear facilities. The education and experience requirements should not be treated as absolute when similar training or an outstanding record will provide reasonable assurance that a person can perform the required tasks.

FLORIDA POWER&LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C R ev.'une 10, 1980 P&9e 1+f 23 This topical report contains the program requirements for Florida Power 2 Light Company's Quality Assurance Program.The Quality Assurance Program is described in detail in the Florida Power R Light Company Quality Assurance Manual.The Regulatory Guides, codes, and standards specifically listed in the matrix of this appendix (on page 2)represent the baseline documents used in the preparation of FPL's QA Manual and this topical report.These documents, therefore, provide the basis for the FPL QA Program, but'hey are not considered to be part of the QA Program unless specifically addressed in the applicable SAR, technical specifications, etc.The FPL Quality Assurance Program meets the requirements of the documents referenced in this appendix.Any alternatives or clarifications made to the requirements contained in these documents are stated on pages subsequent to the second page of this appendix.(h C O Z Eh 04 e 0 4 TOPICAL QUALITY ASSURANCE REPORT APPENDIX C R ev.FLORIDA POWER 4 LIGHT COMPANY BASELINE DOCUMENT MATRIX oate gune 10, 198/e9e 2 Gf 23 GOVERNMENT DOCUMENT 10 CFR PART 50, APPENDIX B 10 CFR PART 50.55a Regulatory Guide 1.8 Rev.1 DATED 2/19/75 9/75 REFERENCE INDUSTRY STANDARD ANSI-iV05.2 ASME BdcPV Code Section III 4 XI ANSI-N18.1 ANSI/ANS 3.1 DRAFT REV.ISSUED DATE 1971 Specified in the SAR document of the respective plant 1971 1978 Regulatory Guide Regulatory Guide 1.28 1.30 Regulatory Guide 1.33 Rev.2 Regulatory Guide 1.37 Regulatory Guide 1.38 Rev.2 Regulatory Guide 1.39 Rev.2 Regulatory Guide 1.58 Rev.1 Regulatory Guide 1.60 Rev.2 Regulatory Guide 1.70 Regulatory Guide 1.88 Rev.2 Regulatory Guide 1.90 Rev.1 Regulatory Guide Regulatory Guide 1.116 1.123 Rev.1 Regulatory Guide 1.100 Rev.1 Regulatory Guide 1.106 6/7/72 8/11/72 2/78 ANSI-N05.2 ANSI-N05.2.0 ANSI-N18.7 5/77 9/77 9/80 6/76 2/70 10/76 0/76 6/76 7/77 9/80 8/80 ANSI-N05.2.2 ANSI-N05.2.3 ANSI-N05.2.6 ANSI-N05.2.11 ANSI-N05.2.10 ANSI-N05.2.9 ANSI-N05.2.5 ANSI-N05.2.8 ANSI-NO 5.2.13 V ANSI-N05.2.12 ANSI-N05.2.23 3/16/73 ANSI-N05.2.1 1971 1972 1976 1973 1972 1973 1978'970 1973 1970 1970 1975 1976 1977 1978 TOPICAL QUALITY ASSURANCE REPORT APPENDIX C LORIOA POWER&LIGHT COMPANY BASELINE DOCUMENT MATRIX Rev.Date June 10, 198/Page 3 of 23 Florida Power 2 Light Company position regarding conflicting guidance and exceptions:, T AR A endix C Clarification ANSI/ANS 3.1-1978 (PSL-2)The Regulatory Guides and industry standards listed in Appendix C to the Topical Quality Assurance Report take precedence over any Regulatory Guide or industry standard which may be referenced in any one of these documents. Re ulator Guide 1.8 Rev.1 ANSI N18.1-1971 ANSI/ANS 3.1 (PSL-2)ANSI N18.1 describes the training and education requirements for plant staff positions and is endorsed by Reg.Guide 1.8 with an exception. That exception is the requirements for the Supervisor -Radiation Protection. ANSI N18.1 is invoked by Technical Specifications (Appendix A of the Facility Operating License)at the Turkey Point plants and PSL-1.ANSI/ANS 3.1-1978 is invoked by Technical Specification at PSL-2.Reg.Guide 1.8 is also invoked by Technical Specifications at our St.Lucie plant and a license amendment has been approved for our Turkey Point plant to specify the Health Physics Supervisor qualifications addressed in Reg.Guide 1.8.To avoid duplication of requirements, FPL will address Plant Staff Qualifications in only the Technical Specif ications.Re ulator Guide 1.30 ANSI'N05.2.0-1972 1 ANSI Nff 5.2.0-1972, Paragraph'.3 addresses installation specifications and requires the inclusion of inspection and test objectives. 'PL maintains that test values and inspection scope are inherently contained in the applicable procedures. ANSI N05.2.0-1972, Paragraph 6.1.2 requires that the inspection of installed equipment verify that"good and proper workmanship" has prevailed. FPL maintains that acceptable parameter compliance with codes and standards along with company preference is the verification of"good and proper workmanship". TOPICAL QUALITY ASSURANCE REPORT APPENDIX C Rev.7'LORIOA POWER a LIGHT COMPANY BASELINE DOCUMENT MATRIX 3une 10, 1980 Page f Gf Re ulator Guide 1.33 Rev.2 ANSI N18.7-1976 FPL's method of addressing Paragraphs 0.0, 5.2.2, 5.2.15 and 5.3 of ANSI 18.7-1976 as modified by Regulatory Guide 1.33, Rev.2 is covered in Section 6 of each individual plant's Technical Specifications. ANSI N18.7-1976, Section 0.3, requires that personnel performing the independent review and audit be specified in number and technical discipline. This standard is invoked by the Technical Specifications (Appendix A of the Facility Operating Licenses)which have been approved for the FPL nuclear plants at St.Lucie and Turkey Point.Specifically this function is performed by the Company Nuclear Review Board (CNRB)identified in Section 6.5.2 of the Technical Specifications. To avoid duplication of requirements, FPL will address the personnel and functions of this independent review and audit only in the Technical Specifications. FPL's method of addressing Section 5.2 of ANSI N18.7-1976, as modified by Regulatory Guide 1.33, Rev.2, is by administratively controlling licensed operator hours on shift and by our Duty.Call Supervisor system.Further, FPL has developed a response to NUREG 0650 which provides staf f ing availability. FPL's method of addressing Paragraph 5.2.8 of ANSI N18.7-1976, as modified by Regulatory Guide 1.33, Rev.2, is covered in Section 0 of each plant's Technical Specifications. FPL's method of addressing Paragraph 5.2.9 of ANSI N18.7-1976, as modified by Regulatory Guide 1.33, Rev.2, is covered in 10 CFR 73 and each plant's Security Plan, and as such is not included in the Quality.Assurance Program. LORIOA POWER II LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C R ev.7 Date gune 10, 1984 Page 5 of 23 Chemical cleaning is not presently controlled as a special process per se;however, the requirements of ANSI N05.2.1-1973 and Regulatory Guide 1.37 dated 3/16/73 are part of the FPL QA Program and are met in our program.FPL proposes these requirements to be an alternative to the requirements of ANSI, N18.7-1976, Paragraph'5.2.18. Further, TQR 9.0, Paragraph 9.2 explains the review of potential special processes and determination of their status as special processes. FPL meets the intent of Section 5.2.19.3 of ANSI N18.7-1976 as modified by Regulatory Guide 1.33, Rev.2, as applied to significant changes to operating procedures, by the technical review of the procedure change by knowledgeable plant professionals, by the safety review of the procedure change by the on-site facility review group, by the regulatory and QA review of the procedure by plant Quality Control, by training the licensed operators in the change through the training report system, and by trained, licensed operators using the revised operating procedure and observing the proper result.In addition, procedure changes will be reviewed to assure 10 CFR 50.59 requirements'are met.Paragraph 5.3.5(0)-Clarification -When FPL uses vendor manuals and drawings which provide adequate instructions for maintenance, these documents are attached or referenced. with Plant Work Orders which are reviewed and appr oved by Supervisory and Quality Control personnel and are considered to be adequate procedures in themselves. These vendor manuals and drawings, when received at site, are controlled documents and changes to the applicable sections and instructions of these documents require the same level of review and approval as the operating procedures. Appendix A of Regulatory Guide 1.33 lists"typical safety related activities which should be covered by written procedures". Regulatory Guide 1.33 is invoked by the Technical Specifications at FPL Nuclear Plants.In order to avoid duplication of requirements invoked in our licensing documents, the FPL Quality Assurance Program does not list those required operating procedures specified in-Appendix A. FLORIDA POWER 4 LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7'a e gune 1P, 198q Pege 6<f 23 Re ulator Guide 1.37/ANSI N05.2.1-1973 ANSI N05.2.1-1973, Paragraph 5 states in part that,"Fitted and tackwelded joints (which will not be immediately sealed by welding)shall be wrapped with polyethylene or other non-halogenated plastic film until the welds can be completed". The FPL QA Manual shall require that the weld be covered to prevent entry of moisture and contaminants but will not specify the material to be employed.Materials employed to cover openings shall meet the requirements of Regulatory Guide 1.37, Position 0.ANSI N05.2.1-1973, Paragraph 7.1 states in part,"provisions shall be made to collect leakage and protect insulation from being wetted".FPL Quality Assurance Program includes the above requirements. However, FPL's program allows the wetting of metallic type insulations which are not adversely affected by wetting.AiVSI N05.2.1-1973, Paragraphs 7.2.2, 7.2.3, and 7.3 address specific cleaning methods (Alkaline, Chelate, Acid)and make recommendations associated with seVeral types of cleaning methods.FPL's QA manual does not specifically delineate these paragraphs. However, the procedure developed per,:Paragraph 2.2 of ANSI N05.2.1 will ensure that any specific cleaning method chosen will be properly considered and controlled. FLORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C R ev.7 oate gune lP, l98q g'.'f 23 Re ulator Guide 1.38 Rev.2/ANSI N05.2.2-l972 FPL will meet the requirements of Reg.Guide l.38, Rev.2, Position 2C, D and E for safety related applications during preoperational and operational activities. Restrictions imposed for tapes to be color constrasting will only be applied to the extent that these colors are dissimilar , or otherwise distinguishable. This does not preclude using other tapes when precuations are taken to ensure these tapes do not come in contact with austentic stainless steel or nickel alloy materials. Vapor barrier material (other than metal)shall be colored to contrast with or be otherwise distinguishable from safety related systems to prevent undisclosed entry into the system.These requirements do not apply to components in storage which would require removal of such tapes and barriers to effect installation. ANSI N05.2.2-1972 Section 2.7 requires that items governed by this standard be classified into one of four levels by the buyer or the contractor. FPL intends to consider what care is appropriate for each item individually rather than generically classifying the mater'ial into protection levels and providing care required of that level.The following shall be considered when determining the handling, storage, and shipping requirements: 1.The vendor's recommended handling, shipping, and storage standards. 2.Environmental requirements which may include such requirements as inert gas I 4 atmosphere, humidity limits, temperature limits, chemical requirements, acceleration (g force)requirements. 3.Special tools or equipment which are provided and controlled as necessary to ensure safe and adequate handling., These tools or equipment shall be inspected and tested at specified times to verify that they are adequately maintained. C 0 Z Ol OI e 0 IL TOPICAL QUALITY ASSURANCE REPORT APPENDIX C Rev.FLORIDA POWER 4 LIGHT COMPANY BASELINE DOCUMENT MATRIX 3une l0, l980 Page'Gf 0.Packaging, covering or coatings required to meet environmental requirements such as barrier and wrap material, desiccants, pipe caps, plugs, contact preservatives, etc.5.Container, crating, skids of sufficient strength to support the item (including stacking). 6.Cushioning, blocking, bracing, and anchoring to prevent movement during shipment or handling.7.Special handling or storage procedures for unique situations. 8.Marking and identification of the item and its packaging. 9.Anticipated"shelf life" of the item.FPL considers this to be a more effective approach since the quantity of spare and replacement material, parts and components governed by this standard will be af forded protection commensurate with the recommendations of Section 2.7 of this standard.8 ANSI N05.2.2-1972 Sections 3.0, 0.0, and the Appendix address all the requirements applicable to the packaging and shipping of material.FPL in general does not package or ship material governed by this standard.Suppliers of material are required by purchase order to provide adequate packaging and shipping protection. Isolated cases of material packaging or shipping are treated on a case-by-case basis and receive protection comparable to that required by the manufacturer of that material.Loading, rigging and handling ptecautions identified in Section 0.3 are applied to material unloaded by FPL kom a transport vehicle.ANSI N05.2.2-1972 Section 5.2 requires that specific attributes of material and components received by FPL be inspected. For plants with operating licenses FPL verities conformance to procurement documents during receipt inspections. Any of these attributes identified in these procurement documents are verified during this inspection. FLORIDA POWER&LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Bey.7 oa e June 10, 198'a 9'f 23 ANSI N05.2.2-1972 Section 5.2, paragraph 5.2.1, requires certain preliminary inspections to be done"prior to unloading" of material which is received.We believe that the sequence specified in the standard is to facilitate commercial claims, and should these preliminary inspections occur"after unloading" that control of materials quality would not be degraded.Accordingly, required shipping damage inspections may be performed after unloading. The requirements of ANSI N05.2.2, Paragraph 7.2 for items that require special handling instructions is clarified by FPL to be limited to those items covered in the scope of NUREG 0612, entitled"Control of Heavy Loads at Nuclear Power Plants".ANSI N05,2.2-1972, Paragraph 7.4 requires that an inspection program be established for handling equipment and rigging, including methods for identifying acceptable and nonconforming items.In lieu of having a program of periodic, documented inspections of rigging and handling equipment, FPL's practice is to,have the individual user determine the equipment's acceptability prior to each use.This prior-to-use inspection is exactly the same as that required during periodic inspections, and uses criteria identified in ANSI N05.2.2-1972, paragraph 7.0.This practice also precludes the need for a system to indicate the acceptability of rigging and handling equipment. Implementation of this prior-to-use inspection will be assured thro'ugh periodic surveillances and audits performed by Quality Assurance and Quality Control.Cranes are inspected on a periodic basis and will not be subjected to this prior-to-use inspection. 0 N C O z Ol OI a 0 4 Certain mechanical components of the PSL-2 nuclear unit have been designed for a service environment of the site area because portions of the plant are exposed to the temperature, humidity, and ocean salt spray during operations. Extreme air temperature variations, snow or r slush are not encountered during operations or in the out-of-doors storage environment. As an alternative to the rigid requirements of storage levels B and C in paragraph 6.1 of ANSI N05.2.2-1972, FPL proposes to store these particular mechanical components outdoors, but within controlled areas, with sufficient periodic surveillances and inspections to minimize the possibility of damage or lowering of quality due to corrosion, contamination, deterioration, or physical damage.In cases where special environmental conditions are present (i.e.hurricanes, paint'sprays, concrete pours, etc.)precautions or additional steps will be taken to further protect the items. FLORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C R ev.7 oate gune 10, 1980 f 23 Re ulator Guide 1.39 Rev.2 ANSI N05.2.3-1973 For FPL's operating nuclear plants, alternative methods are followed to achieve equivalent objectives for the below listed sections of ANSI N05.2.3-1973: The zone designations of Section 2.1 of N05.2.3 and the requirements associated with each zone are not consistent with the FPL Housekeeping requirements at our operating nuclear units.In lieu of the zone designation, cleanliness is maintained at a level consistent with the work being performed, so as to prevent the entry of foreign material into safety related systems.Documented cleanliness inspections are performed immediately prior to system closure.!Control of personnel, tools, equipment, and supplies is established with approved procedures when the safety function of a system, component, or item may be jeopardized and also while the reactor system is opened for inspection, maintenance, or repair.Re ulator Guide 1.58 Revision 1 ANSI N05.2.6-1978 ANSI N05.2.6-1978, Paragraphs 1.1, 3.1, 3.2.2(a)and 0 (Table-1)identify requirements which apply to personnel who perform inspections, tests or nondestructive examinations or who participate in the approval of procedures, the handling of data or test results, or the control of reports and records.FPL proposes an alternative to capability requirements for those who participate in: (1)the approval of procedures, (2)the handling of data or test results and (3)the control of reports and records.FPL accomplishes this by having personnel determined to be qualified and competent by management through consideration of education, ttaining, and experience. The Florida Power 2 Light Company position on the scope of ANSI N05.2.6-1978 is.that personnel participating in testing who take data or make observations, where special training is not required to perform this function, need not be qualified in accordance with ANSI N05.2.6 but need only be trained to the extent necessary to perform the assigned function. FLORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7~'a e gune 10 J.98$age 11~f 23 For leak testing conducted as part of the preoperational and operational testing programs,'FPL considers that the qualification requirements of Regulatory Guide 1.8 (ANSI N18.1-1971) and ANSI N05.2.6-1978, Paragraph 3.0 to be an acceptable alternative to SNT-TC-1A-1975 requirements for leak testing, except for leak testing defined in and performed under Section III of'the ASME Code, where in such cases, the Code shall govern.For preoperational and operational inspection, examination and testing by Quality Control Inspectors, FPL considers that Position C.l of Regulatory Guide 1.58, Revision 1 and ANSI N05.2.6-1978, Paragraph 3.0 are acceptable requirements for training and qualification, except for inspections, tests and examinations defined in and performed under Section III of the ASME Code, where in such cases, the Code shall govern.For all other preoperational and operational inspection, examination and testing performed by 1 operating plant and support personnel, FPL considers that training and qualification to the requirement of ANSI N18.1-1971 and Regulatory Guide 1.8 are sufficient for the type and scope of activities performed and that qualific'ations to ANSI N05.2.6-1978 is unnecessary and'redundant. These preoperational and operational inspection, examination tests shall be supervised or directed by personnel qualified to Position C.l of Regulatory Guid'e 1.58, Revision l.FPL shall comply with Position C.10 of Regulatory Guide 1.58, Revision 1, effective with Revision 0 of the Topical Quality Assurance Report, in that all new certifications issued for personnel shall meet the education and experience requirements or shall document objective evidence demonstrating that the individual indeed does have comparable or equivalent competence to that which would be gained from having the required education and experience. FPL's position on ANSI N05.2.6-1978, Paragraph 2.3 is that an initial and periodic review (not to exceed two years)of personnel shall determine the capabilities in his qualified area.If during this review or at any other time, it is determined that the individual's capabilities are not in accordance with the specified requirements, that individual shall be removed from that activity until the required'capability has.been demonstrated. In addition, during this review a 4 determination shall be made that an individual has been actively involved in the inspection process in his qualified area. FLORIDA POWER 4 LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7 oa e June 1P, 198$a9e 12<f 23 Re ulator Guide 1.60 Rev.2 ANSI N05.2.11-1970 FPL's exception to Regulatory Guide position C.2 is as follows: I Design verification shall be performed by technically qualified individual(s) or group(s)other than those who performed the design.The original designers and verifiers may both be from the design organization. Design verification by the designer's immediate supervisor shall be limited to those instances where the supervisor is the only qualified individual available within the design organization. These instances are further restricted to designs where the designs where the supervisor did not,.specify a singular design approach, or did not restrict design methods or alternatives, or did not specify design inputs (unless the specified design inputs have already been independently verified)., Justification for verification by the designer's immediate supervisor should be documented along with the extent of the-supervisor's involvement in the design.ANSI N05.2.11-1970, Paragraph 11.0 requires that"audits shall include an evaluation of design quality assurance policies, practices, procedures and instructions...." FPL's design quality assurance (and all other QA elements)policies, procedures and instructions are included in FPL's.Quality Assurance Program documentation. The Quality Assurance Department evaluates all of this documentation in reviews performed during its development and revision.Accordingly, FPL does not require subsequent (and redundant) evaluations of these Quality Assurance Program policies, procedures and instructions during au'dits.FPL audits will include evaluations of the adequacy of the practices which are the implementation of these policies, procedures and instructions. Re ulato Guide 1.68 (11 73)Regulatory Guide 1.68 (11/73)entitled"Preoperational and Initial Start-up Test Programs for Water Cooled Power Reactors" is addressed in Section 10.2.1 of the St.Lucie Unit 2 FSAR which states in part,"The start-up test program is developed using the recommendations of Regulatory Guide 1.68".To avoid duplication of requirements, FPL will address Regulatory Guide 1.68 in the FSAR. FLORIDA POWER Ii LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7 3une'10, 1980 Pege 13~f 23 Re ulator Guide 1.70 ANSI N05.2.10-1973 ANSI N05.2.10-1973 identifies terms and their definitions important to the uniform understanding of the intent of required quality assurance practices for the construction of nuclear power plants.Regulatory Guide 1.70 (2-70)endorses these terms and definitions and extends them through the.operational phase and includes a clarification of procurement documents. FPL has developed a glossary of terms and their definitions as part of the Quality Assurance Manual which is being used throughout its nuclear construction and operating plant activities. The following def initions are'urrently listed in our glossary and are alternatives or clarifications to those listed in the ANSI Standard and Regulatory Guide: Assembly A combination of subassemblies or components or both, fitted together to form a workable unit.Audit A documented activity performed in accordance with written procedures or checklists to verify, by examination and evaluation of objective evidence, that applicable elements of the quality assurance program have been developed, documented and effectively implemented in accordance with specified requirements. An audit does not include surveillance or inspection for the purpose of process control or product acceptance. Guidelines Particular provisions which are considered good practice but which are not mandatory in programs intended to comply with Standards. The term"should" denotes a guideline; the term"shall" denotes a requirement; and the word"may" denotes permission, neither a requirement nor a recommendation. FLORIDA POWER d LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C 8 ev., 7 oate gune la, I9gq PGg8 lq Gf Inspector (Owner's or Installer's) A qualified inspector employed by the Owner or Installer, whose duties include the verification of quality related activities on installations. Inspection Examination, observation, or measurement to determine the conformance of materials, supplies, components, parts, appurtenances, systems, processes, or structures to predetermined requirements. Procurement Documents Contractually binding documents, including such documents as contracts, letters of intent, work orders, purchase orders or proposals and their acceptances which authorize the seller to perform services or supply equipment, material, or facilities on behalf of the purchaser. Qualif ication (Personnel) The characteristics or abilities gained through training or experience or both as measured against established requirements such as standards or tests that qualify an individual to perform a required function.Quality Assurance All those planned and systematic actions necessary to provide adequate confidence that a structure, system or component will perform satisfactorily in service.Quality Assurance includes quality control.Quality Control Those quality assurance actions related to the physical characteristics or material, structure, component or system, which provide a means to control the quality of the material, structure, component or system to predetermined requirements. LORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C 8 ev.7 3une 10;1980 Page 15 Gf 23 Storage That period following the release of an item for shipment until turnover.for start-up preoperational testing.This would include in-place storage.System An integral part of a nuclear power plant comprised of electrical,.electronic, or mechanical components (or combinations thereof)that may be operated as a separate entity to perform a specific function.Testing Performance of those steps necessary to determine that systems or components function in accordance with predetermined specif ications."Re uirements" Clarification for Glossar.A mandatory action, denoted by the word shall.(See"Guidelines")Requirements are generally based on statutes or regulations, but may be internally generated within the company."Shall" is therefore used for both external, legally enfor ceable actions and internal requirements not enforceable under current NRC practices. Re ulator Guide 1.88 Rev.2 ANSI N05.2.9-1974 t'NSI N05.2.9-1970, Section 3.2.5 requires Quality Assurance records be classified as lifetime or non-permanent and further defines lifetime and" non-permanent in Section 2.2 of the Standard.FPL provides the following definitions as an alternative:to the above.0 Vl 8 2 Cll t Ol e 0 4 Lifetime Records: Records which are required by the NRC facility operating license, the NRC l construction permit, applicable parts of lOCFR, the FSAR, or other NRC commitments to be retained for the life of the plant.' FLORIDA POWER I LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7 3une,10, 1980 P~ge 16 Gf 23 iVon-permanent Records: Records which are required by the NRC facility operating license, the NRC construction permit, applicable parts of 10CFR, the FSAR, or other NRC commitments to be retained for periods of time less than the life of the plant.ANSI N05.2.9-1970, requirements for Section 5.6,"Facility", are clarified by FPL as follows: QA records shall be stored in a manner as to protect contents from possible destruction by causes such as fire, flooding, tornados, insects, rodents, and from possible deterioration by a combination of extreme variations in temperature and humidity conditions. A QA Record Storage Evaluation Team (QARSET)shall be responsible for determining methods utilized to assure that QA Records are adequately stored and protected. The QARSET shall consist of the following: the Manager of Quality Assurance, the Loss Prevention Engineer, and the Manager of Corporate Record Services, who shall be responsible for maintaining records of evaluations and establishing schedules to assure that reevaluations are performed every two (2)years.If necessary, the above QARSET Committee may delegate appropriate d:signees to serve as team members.As part of their responsibility, the QARSET shall evaluate the status of existing facilities and the adequacy of additional records facilities prior to the construction of a new facility or the conversion of existing structures. Preferably, such evaluations should be performed during the design phase.r ANSI N05.2.9-1974 will be utilized in the evaluation of potential record storage facilities. Section 5.6"Facilities" is modified as follows and shall be the basis for QARSET approved QA Record Storage Facilities. l.A 2-hour vault meeting NFPA No, 232 without additional provisions. 2.2-hour rated fire resistant'file room as defined in iVFPA No.232-1980 if the following additional provision are provided: FLORIDA POWER I LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7 aune lo, I98O P~9e.l7 G 23 a.Early warning fire detection and automatic fire suppression shall be provided, with electronic supervison at a constantly monitored central station.b.Records shall be stored in fully enclosed metal cabinets.Records shall not be permitted on open steel shelving.No storage or records shall be permitted on the floor of the facility.Adequate access and aisle space shall be maintained at all times throughout the facility.c.Work not directly associated with records storage or retrieval shall be prohibited .within the storage facility.d.Smoking and eating/drinking shall be prohibited throughout the records storage facility.e.Ventilation, temperature, and humidity control equipment shall be provided with approved fire dampers where they penetrate fire barriers.3.Other conditions from the above may be approved by the QARSET if in their judgement the condition meets the established level of protection defined above.There are two acceptable alternatives to the establishment of an approved QA record storage facility: l.The maintenance of duplicate QA Records stored in separate locations which are not subject to the same destructive force at the same time.2.The use of QARSET approved factory built record protection equipment, such as insulated record containers, fire-resistive safes, and insulated filing devices.V)C 0 Z Cb CV C 0 4 Where a specially constructed storage room is maintained to store the only copy of QA records, at least the following features should be considered in its construction: TOPICAL QUALITY ASSURANCE REPORT APPENDIX C FLQRIOA POWER d LIGHT COMPANY BASELINE DOCUMENT MATRIX Rev.7 3une 10, 1980 Pege l 8<f 23 (1)Reinforced concrete, concrete block, masonry, or equal construction. (2)Concrete floor and roof with sufficient slope for drainage;if a floor drain is provided, a check valve (or equal)shall be included.(3)Structure, doors, frames and hardware should be fire-rated with a recommended two hour minimum rating.(0)Sealant applied over walls as a moisture or condensation barrier.(5)Surface sealant on floor providing a hard-wear surface to minimize concrete dusting.(6)Foundation sealant and provision for drainage.(7)Forced-air circulation with filter system.(8)Adequate fire detection and/or suppression system.(9)No pipes other than those providing fire protection to the storage facility are to be located within the facility.Re ulator Guide 1.116 ANSI N05.2.8-1975 ANSI N05.2.8-1975, Paragraph 2.3 requires that Measuring and Test Equipment (MRTE)used for inspection be identified on the Inspection Report.FPL may, as an option, employ a MdcTE issue log which provides traceability between MdcTE and the applicable inspections. ANSI N05.2.8-1975, Paragraph 0.6 addresses care of items to the extent that temporary use.of equipment or facilities to which the standard applies that are to become part of the completed project may be desirable. TOPICAL QUALITY ASSURANCE REPORT APPENDIX C Rev.LORIOA POWER a LIGHT COMPANY BASELINE DOCUMENT MATRIX oate gune 10, 198'a9a 19<f 23 The following clarification applies to the above statement. For FPL plants in the construction phase (to the point of plant operation license)temporary use of equipment and facilities may be used according to need and/or situation. In this case, authorization for usage shall be provided along with all the documents, conditions, safeguards and evaluations to verify permanent plant equipment adequacy.In the operations phase all equipment, including temporary equipment, is subject to identical controls to preclude adverse effects on safety and suitability for use.Re ulato.Guide 1.123 Rev.1 ANSI N05.2.13-1976 ANSI N05.2.13-1976 Section 1.1 states that the extent to which the individual requirements of this standard will apply will depend upon the nature and scope of the work to be performed and the required quality of the items or services purchased. For commercial grade items, FPL has determined that certain aspects of the individual requirements of ANSI N05.2.13 need not apply.Commercial grade items are those (1)not subject to design or specification requirements that are unique to facilities or activities licensed by the NRC, and (2)used in applications other than facilities or activities licensed by the NRC, and (3)to be ordered from the manufacturer/supplier on the basis of specifications set forth in the manufacturer's published product description. These commercial items are subject to varying degrees of control as indicated in the FPL Quality Assurance Manual.1 As a minimum, an evaluation is performed by qualified personnel to assure that the commercial C item satisfies the necessary technical and quality requirements and the item is checked upon receipt to assure that the item received was the one ordered, damage was not sustained during U shipment, and documentation, if required, was received.C 0 Z Ol ea a 0 4 ANSI N05.2.13-1976 Section 1.3 provides a definition of"procurement document" which is different from the definition contained in ANSI N05.2.10-1973 and Regulatory Guide 1.74.The Florida Power dc Light (FPL)Quality Assurance Program uses the definition of"procurement document" contained in ANSI N05.2.10-1973 as modified by Regulatory Guide 1.70. FLORIDA POWER 4 LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7 3une 10, 1980 eege 20~~23 ANSI N05.2.13-1976 Section 3.3.a requires that procurement documents be reviewed prior to release for bid and contract award.The FPL Quality Assurance Program requires procurement document reviews prior to bid and contract award for all safety related purchases with the exception of these accomplished by"Confirming Purchase Order".A"Confirming Purchase Order" is an order which is initially placed verbally with the supplier and then later confirmed with a written Purchase Order.A"Confirming Purchase Order" is only used when time r restraints would prohibit the normal review and approval cycle.The following controls are provided in the FPL Quality Assurance Manual to assure that the intent of ANSI N05.2.13 is satisfied for"Confirming Purchase Orders".(1)Quality Assurance must be contacted prior to contacting the supplier to place the order unless it is an emergency purchase after normal working hours in which case Quality Assurance is contacted the next working day.(2)Prior to verbally placing the order, it must be verified that the intended supplier is on the FPL Quality Assurance Approved Supplier List.(3)The verbally placed order must be promptly followed-up (confirmed) with a written procurement document which is subject to all reviews and approvals required for safety related purchases. Section 8.2 of ANSI N05.2.13 identifies those nonconformances which shall be submitted to the Purchaser. Florida Power R Light's (FPL)position regarding the nonconformances to be reported is as follows.Suppliers (including A/E's and Contractors) shall submit all nonconformances which consist of one or more of the following: 1)2)Technical or material requirements are violated.Requirement in supplier documents which have been approved by the Purchaser is violated.3)Nonconformances which would affect the quality of the item in regard to function of safety related features.In cases where the supplier cannot make this determination, they shall be submitted to the Purchaser for evaluation. 4 TOPICAL QUALITY ASSURANCE REPORT APPENDIX C Rev.FLORIOA POWER 4 LIGHT COMPANY BASELINE DOCUMENT MATRIX 3une 10, 1980 ege 21 Gf 23 This policy assures that all nonconformances affecting safety related functions will be reviewed and approved by FPL.In all cases, the supplier's documentation on nonconformances is.available for FPL's review.Re ulator Guide 1.130 ANSI N05.2.0-1972 ANSI N05.2.0-1972, Paragraph 2.5.2 requires that equipment be"suitably marked to indicate date of next required calibration". In lieu of marking equipment, FPL has chosen to control calibration of installed instrumentation and control equipment by maintaining records for each piece of equipment by instrument tag number (or equivalent) to show that established schedules and procedures for calibration have been followed.Re ulator Guide 1.100 Rev.1/ANSI N05.2.12-1977 Regulatory Guide 1.100, Positions C.3 adtb, states in part that applicable elements of an organization's Quality Assurance Program should be audited at least annually or at least once within the life of the activity, whichever is shorter.ANSI N18.7-1972, Paragraph 0A (endorsed by Regulatory Guide 1.33)states in part;"Audits of selected aspects of plant operation shall be performed with a frequency commensurate with their safety significance, and in such a manner as to assure that an audit of safety related activities is completed within a period of'two years." V)C 0 2 Ol I Cll e 0 4 I FPL has chosen a two year cycle for auditing elements of the internal and on-site QA Program during the operation phase of plant life following initial fuel loading.FPL's position is that the two year cycle: (1)allows more in-depth and meaningful audits in each regularly scheduled area, (2)permits more audits of ongoing activities, and (3)in conjunction with the planning and'scheduling requirement of TQR 18.0 provides for a comprehensive audit program.The audit frequency requirements of Regulatory Guide 1.100 will be followed during other plants'hases. FLORIDA POWER I LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX'PPENDIX C Rev.7 3une 10, 1980 ege 22~f 23 In the case of suppliers, an annual evaluation of quality performance history shall be performers to determine reaudit requirements. Reaudit requirements for suppliers shall be based on the quality performance, and the complexity and criticality of the equipment or service being procured.ANSI N05.2.12, Paragraph 0.3.1 states:."A brief pre-audit conference shall be conducted at the audit site with cognizant organization management. The purpose of the conference shall be to confirm the audit scope, present the audit plan, introduce auditors, meet counterparts, discuss audit sequence and plans for the post-audit conference, and establish channels of communication." ,FPL will not require the pr e-audit conference for audits of limited scope and of specific site activities conducted by the Construction and Operations Groups.This conference is omitted because the day-to-day contact of the auditors and plant management, the awareness on the part of plant management that these audits are conducted without pre-audit conferences, and the limited scope of the audits meet the intent of a're-audit conference. ANSI Standard N05.2.12-1977, Paragraph 0.5.1 states in part"The audited organization shall provide a follow-up report stating the corrective action taken and the date corrective'action 'as completed". The FPL QA Program requires the QA Department to followup on all action taken by the audited department. This is documented on the corrective action followup form by the QA Department and closed by the QA Department instead of the audited department. This assures that all actions taken by the audited department are verified by the QA Department and that the QA Department concurs with the resolution. We feel that'it is appropriate for this to be documented by the QA Department instead of the audited department. FLORIDA POWER II LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT BASELINE DOCUMENT MATRIX APPENDIX C Rev.7 3une 10, 1980 Pe9e 23 Gf 23 P lannin Clarif ication ANSI N05.2.0-1972, Paragraph 2.1;ANSI N05.2.6-1973, Paragraph 2.1;ANSI N05.2.13-1976, Paragraph 7.2;ANSI N18.7-1972, Paragraph 5.1.6.3;ANSI N05.2.8-1975, Paragraph 2.1 and Paragraph 2.2 include plans and/or planning as required.The terms plan and/or planning are included in FPL's activities as indicated in the following clarification: Planning is considered to be a management process or analytical tool used as an aid to help develop identification and/or development of program requirements, implementation activities, assignments and staffing, inspections, surveillances and audits, controls and other activities to assure completeness of the requirements. Planning, as such, is not always documented nor addressed as an end item and is considered to be an integral"process" within the developed item.Plans which are considered to be end type or output type documents have the term"plan" in the title, such as ISI I%aster Plan, Audit Plan, Start-up Plan, and others, which as such will reflect directly the requirement of these standards in the appropriate documents. Plans which are not considered to be end type or output type documents do not have the word plan in the title.However, certain procedures, instructions, flow charts, schedules and checklists may be considered to be plans reflecting planned actions which especially require step-by-step accomplishments. In these cases, the term plan may not appear in the title but considered to be a plan only in the indirect sense and identified as a procedure or other document.FPL considers the above practice to be in compliance with the"plan" requirements of these standards.

TOPICAL QUALITY ASSURANCE REPORT Rev.APP END IX D N/A FLQRIOA POWER 4 LIGHT COMPANY GRAY, GREEN, AND ORANGE BOOK MATRIX TO QA PROCEDURES oa~May 7 I932 cage APPENDIX D"GRAY, GREEN, AND ORANGE BOOK MATRIX TO QA PROCEDURES CANCELLED IN ENTIRETY c7)e 0 Z Ol n E 0 4 TOPICAL QUALITY ASKJRANCE REPORT Rev.APPENDIX E LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE 4'bctober 2'/;1988 Page 1 of 11 P NUMBER TITLE SECTION DESCRIPTION 1.1 CANCELLED 2.1 CANCELLED (Terms and Definitions contained in the QA Manual Glossary)2.2 REVISION OF THE TOPICAL QUALITY ASSURANCE REPORT Provides instructions for the revision of the Florida Power Light Company Topical Quality'ssurance Report (FPL TQAR).2.3 QUALITY ASSURANCE PROGRAM REVIEW Describes the instructions and methods used for establishing, preparing, issuing, revising and controlling Quality Procedures employed in supporting quality requirements.

2.4 PREPARATION

AND REVISION OF QUALITY INSTRUCTIONS Provides the responsibilities, guidelines and methods used for developing and revising Quality Instructions, based upon QP's, that involve quality activities within a department or organization and are unique to that activity.2.5 QUALITY ASSURANCE INDOCTRINATION AND DEPARTMENTAL TRAINING Describes the requirements for the indoctrination and training of personnel'ho perform, or are responsible for activities that affect quality.2.6 CANCELLED C 0 z Ol CV 0 IL TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE Date October 27,]Page 2 of P NUMBER TITLE SECTION DESCRIPTION

2.7 IDENTIFICATION

OF SAFETY RELATED STRUCTURES, SYSTEMS, AND COMPONENTS Describes the development and approval of documents identifying safety related and safety related design feature structures, systems and components.

2.8 CLEANLINESSiCONTROL

METHODS Provides criteria for securing good housekeeping. Assigns responsi-bilities for assuring that the cleanliness of material, systems and structures is maintained.

2.9 QUALIFICATION

OF QA AUDIT, QC INSPECTION AND CONSTRUCTION TEST PERSONNEL Describes the personnel INSPECTION qualifications that are required to assure that competent QC inspectors, QA auditors, and construction test personnel perform these respective functions. 2.10 HOUSEKEEPING FOR OPERATING PLANTS 2.11 CANCELLED Describes the responsibilities and controls for housekeeping at operat-ing nuclear power plants.Cl CO Ol O C 17 D Y V 0 N a 0 Z Ol Ol E 0 2.12 FPL QA PROGRAM APPLICABILITY FOR FIRE PROTECTION SYSTEMS 2.13 PROCESSING OF NRC CORRESPONDENCE 'Identifies the applicability of the~Quality Assurance Program for Fire Protection Systems.Describes the system for providing, responses to NRC initiated action requests. TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE October 27, 1988 Pe9e 3 Of 11 P NUMBER TITLE SECTION DESCRIPTION 2.14 IMPLEMENTATION OF ASME XI 2.17 ENVIRONMENTAL QUALIFICATION (EQ)OF ELECTRICAL EQUIPMENT Describes the program and responsibilities for controlling activities defined by ASME Section XI'elineates the responsibilities and requirements for maintaining the environmental qualifications of nuclear'plant components. 3:1 CANCELLED 3.2 IDENTIFICATION AND CONTROL OF DESIGN INTERFACES Describes measures employed for identifying and controlling design interfaces, changes in design interfaces, and modifications that affect documents. 3.4 PLANT CHANGES AND MODIFICATIONS FOR OPERATING PLANTS Establishes measures for controlling design changes or modifications in operating nuclear power plants.3.5 DESIGN CONTROL AT THE CONSTRUCTION SITE Defines the responsibilities and methods employed for the initiation, review, evaluation, approval and disposition of field~initiated design changes and miscellaneous design documents such as field sketches and isometrics. 3.6 CONTROL OF FPL ORIGINATED DESIGN Covers the preparation, review, and approval of design input documents, design analysis specifications, and design verification for safety related design work originated by FPL. TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE October 27, 1 Page 4 of, ll P NUMBER TITLE SECTION DESCRIPTION

3.7 EVALUATION

AND CONTROL OF CONTRACTOR DESIGN FOR NUCLEAR FUEL AND RELATED SYSTEMS Describes the-evaluation and control of contractor designs for fuel related components and analysis.4.1 CONTROL OF PROCUREMENT ORIGINATED BY OPERATING PLANT PERSONNEL Provides a system to assure that the appropriate technical and quality requirements are placed upon suppliers who provide materials, equipment, and services for operating nuclear plants as requested by operating plant personnel.

4.2 EVALUATION

OF CONTRACTOR'S BIDS TECHNICAL Provides the basic evaluation factors for technical evaluations of contractor's bids to supply material, equipment, or services to FPL or FPL's Architect/Engineer. 4.3 CANCELLED 4.4 CONTROL OF PROCUREMENT ORIGINATED BY NON-OPERATING PLANT PERSONNEL Applies to all FPL issued purchase orders and contracts relating to a nuclear power plant, except those originated by operating plant personnel. Cl CV~C CC: '0 0 0 0 Vl 0 0 Z Ol CV E 0 I 4.5 PROCUREMENT OF SAFETY RELATED AND QUALITY RELATED ELECTRICAL EQUIPMENT Provides a system to assure, appropriate'echnical and quality requirements are placed on suppliers of electrical equipment for nuclear plants. TOPICAL QUALITY ASSURANCE REPORT APPENDIX E Rev.LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE October"27, 1988 Page 5 of 11 P NUMBER TITLE SECTION DESCRIPTION 5.1 OPERATING PLANT PROCEDURES Describes measures which ensure that instructions and procedures used in operating plants are identified, prepared, reviewed, approved," issued and revised in accordance with regulatory and FPL requirements. 5.2 BACKFZT PROCEDURES"Describes the generation, review and control of backfit procedures. 6.1'ONTROL OF CONSTRUCTION PROJECT CONTRACTOR DRAWINGS, SPECIFICATIONS, AND PROCEDURES Defines responsibilities and methods for the control and issue of contractor drawings, specifications and procedures to be used during the construction phase of nuclear power plants.6.2 CONTROL OF DOCUMENTS ISSUED BY FPL Instructions are provided ,for controlling documents issued by FPL'hich prescribe activities affecting the quality of safety related items.6.3 CANCELLED 6.4 CANCELLED'.5 CANCELLED 6.6 DRAWING CONTROL FOR OPERATING NUCLEAR POWER PLANTS Describes the method to be used'or controlling and updating nuclear safety related drawings for operating plants after turnover from the design organization. TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E LIST OF CORPORATE QUALITY ASKJRANCE PROCEDURE Date October 27,'1 Page 6 Of 11 P NUMBER TITLE SECTION DESCRIPTION 6.7 CONTROL OF'VENDOR MANUALS AND VENDOR TECHNICAL ZNFORMATION 7.1 RECEIPT INSPECTION OF MATERIALS, PARTS AND COMPONENTS AT THE PLANT SITE 7.2 CANCELLED Establishes requirements for controlling technical manuals for operating, maintenance and test equipment. Provides instructions for receipt inspection of materials, parts and components which have been obtained for use in nuclear safety applica-tions at the operating plant site.7.3 CANCELLED 7.4 EVALUATION OF SUPPLIERS OF SAFETY RELATED ITEMS OR SERVICES 7.5 CANCELLED Provides standards, measures, and guidelines for the evaluation of QA Programs of contractors or suppliers supplying items or services.Cl cv 4 C 5 PA 0 0 2 Ol C4 E ,0 7.6 ACCEPTANCE OF ITEMS AND SERVICES 7.8 REVIEW AND DISPOSZTION OF SUPPLIER DEVIATION NOTICES Describes the responsibilities and requirements for accepting nuclear safety related items or services that are being procured for nuclear power plants.Describes the responsibilities and requirements for the review and disposition of nonconformances identified 'ithin a supplier's facility which have resulted or will result in an item which does not fully comply with the FPL.procurement document quality and technical requirements. This procedure applies to purchased items which have not yet been shipped. TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE APPENDIX E Rev.11 October 27, 1988 Page 7 of P NUMBER TITLE SECTION DESCRIPTION 7.9 CONTROL OF ON-SITE VENDOR SERVICES This procedure provides a system to assure that vendors who provide on-site services by contract or purchase order to FPL at nuclear power plants are controlled.

8.1 1DENTIFICATION

AND CONTROL OF Delineates measures for assuring MATERIALS, PARTS, AND COMPONENTS AT THE traceability, identification and PLANT SITE control of items from the time they are received through usage at operating plants.8.2 CANCELLED 9.1 CONTROL OF SPECIAL PROCESSES Delineates the responsibilities of organizations and personnel, and the-control and documentation of special, processes that are applied to safety related items.9.2 CANCELLED (Combined with 9.1)9.4 CONTROL OF WELDING FOR NUCLEAR POWER PLANTS Delineates responsibilities and requirements for control FPL welding processes for nuclear power plants.10.1 CANCELLED CO Ol 10.2 CANCELLED ul C 0 z Ol IH Ol s 0 TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE APPENDIX E Rev.11 October 27, 198 Page 8 Of 11 SECTION DESCRIPTION 10.3 INSPECTION AND SURVEILLANCE 10.4 CANCELLED 10.5 CANCELLED 10.6 CANCELLED Delineates responsibilities and requirements for the inspection and surveillance of safety related plant maintenance activities, operation of safety related systems, and fuel handling activities. 11.1 CANCELLED (Combined with 11.4)11.2 CANCELLED (Combined with 11.4)11.3 CANCELLED (Combined with 11.4)11.4 TEST CONTROL Defines the measures for control of proof test prior to installation, construction tests, preoperational tests, startup tests, operational tests and retests following repairs, replacements or modif i-cations for nuclear safety related systems, structures, and components. ID CO CI~D 0'.O D V 0 Ih C d 2 N F 0 TOPICAL QUALITY ASSURANCE REPORT APPENDIX E Rev.11 LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE'bctober 27, 1988 Page 9 of 11 P NUMBER TITLE SECTION DESCRIPTION 12.1 CALIBRATION AND CONTROL OF MEASURING AND TEST EQUIPMENT Delineates the responsibilities for implementing the described program for maintenance, calibration and control of measuring'nd test equipment (MGTE).12.2 CALIBRATION CONTROL OF INSTALLED PLANT INSTRUMENTATION AND CONTROL EQUIPMENT 13.1 HANDLING, STORAGE AND SHIPPING OF MATERIALS, PARTS AND COMPONENTS 13.2 CANCELLED Describes the calibration program, delineates responsibilities, and establishes procedures for control over the calibration of installed instrumentation and plant control equipment. Establishes responsibilities and procedures to assure that measures are employed by FPL and contractors to: (1)control the handling, shipping and storage of material;(2)protect the quality of material by using proper handling, shipping, and storage techniques; .(3)effectively control the disposition of discrepant items.13.3 CANCELLED (Combined with 13.1)14.1 CANCELLED (Combined with 14.3)14.2 CANCELLED (Combined with 14.3)Vl C 0 2 Ol Ol 0 TOPICAL QUALITY ASKJMNCE REPORT Rev.APPENDIX E LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE Date October 27, Page 10 of 11 P NUMBER TITLE SECTION DESCRIPTION 14.3 INSPECTION, TEST AND OPERATING STATUS DURING PLANT OPERATION Defines the measures and responsi-bilities for the identification 'of the inspection, test and operating status of structures, systems, and components. 15.1 CANCELLED (Combined with 15.2)15.2 CONTROL OF NONCONFORMING MATERIALS, PARTS, COMPONENTS AND SERVICES 16.1 CORRECTIVE ACTION Defines the objectives and PARTS OR responsibilities for controlling nonconforming items or services in order to prevent their inadvertent use, installation or application to operating nuclear power plants.Establishes the respective responsibilities of FPL personnel and the procedure for assuring that conditions identified by the FPL QA Department as being adverse to quality, are corrected. 16.2 CANCELLED (Combined with 16.1)16.3 CANCELLED (Combined with 16.1)tD CO tV D K Q 4 0 Vl C 0 Z Ol N E 0 16.4 EVALUATING AND REPORTING OF DEFECTS AND NONCOMPLIANCES FOR SUBSTANTIAL SAFETY HAZARDS IN ACCORDANCE WITH 10 CFR PART 21" Specifies the measures and DEFECTS 6 responsibilities within Florida Power 6 Light to assure compliance to 10 CFR Part 21. TOPICAL QUALITY ASSUEVLNCE REPORT Rev.APPENDIX E LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE October 27, 1988 ll Of 11 P NUMBER TITLE SECTION DESCRIPTION 16.6 CANCELLED 17.1 THE COLLECTION AND STORAGE OF QUALITY ASSURANCE RECORDS FOR NUCLEAR POWER PLANTS 18.1 PERFORMANCE OF QUALITY ASSURANCE AUDITS Zdentif ies records and documents required to substantiate quality;and, describes measures employed for their maintenance, retention and retrieval. Provides instructions for conducting audits of FPL Quality Assurance'rogram activities. 18.2 CANCELLED 18.3 CANCELLED 18.4 CANCELLED .)DI t FLORIDA POWER 8 LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT TOPICS TO BE ADDRESSED IN SAFETY ANALYSIS REPORTS APPENDIX F Rev.I Da'e i/ay 7 I9$2 Page nfl The FPL Topical Quality Assurance Report is the statement of Florida Power 2 Light Company Quality Assurance Program Requirements which do not vary with plant site.These stated requirements form a description of the FPL Quality Assurance Program which does not contain identification of the involvement of principal contractors such as the'Architect/Engineer, Nuclear Steam Supply System vendor, or Constructor. The contractor involvement in the Program will be described in the plant Safety Analysis Report.In addition, other detailed aspects of the Quality Assurance Program vary from plant-to-plant or with plant site.These aspects will also be described in the plant SAR.The requirements of the FPL Quality Assurance Program shall apply to the nuclear safety related structures, systems-and components as defined in the applicable plant SA R. lf tJ ENCLOSURE XXX PEN AND XNK MARKED UP PAGES OF THE PREVXOUS REVXSXONS e 0 TOPICAL QUALITY ASSURANCE REPORT Rev.FLORIDA POWER 4 LIGHT COMPANY ABSTRACT Date 3une 10, 1980 Page 1 of l, Florida Power R Light Company (FPL)has established and implemented a Quality Assurance Program to provide assurance that the design, procurement, modification and operation of nuclear power plants conforms with applicable regulatory requirements. The FPL Quality Assurance Program described in this Topical Report is in compliance with the requirements of Appendix B to 10 CFR Part 50.The FPL Quality Assurance Program meets the requirements provided by the NRC Regulatory Guidance and Industry Standards as listed in Appendix C of this Topical Quality Assurance Report. f:A s g f, I ig II* TOPICAL QUALITY ASSURANCE REPORT Reve 11 TABLE OF CONTENTS Date May 10, 1988 Page 1 of REVISION DATE ID Ol C Title Page Abstract NRC Staff Evaluation Letter Table of Contents Policy Statement Introduction Topical Quality Requirements

" g'>~f.U C i'v t/~cM TQR 1.0 Organization TQR 2.0 Quality Assurance Program TQR 3.0 Design Control TQR 4.0 Procurement Document Control TQR 5.0 Instruction, Procedures

&Drawings TQR 6.0 TQR 7.0 Document Control Control of Purchased Items&Services TQR 14.0 TQR 15.0 Inspection, Test&Operating Status'Nonconforming Materials, Parts or Components TQR 16.0 Corrective Action TQR 17.0 Quality Assurance Records TQR 18.0 Audits C~7&2 8 3 6 TQR 8.0 Identification &Control of Materials, Parts&Components TQR 9.0 Control of Special'roce'sses TQR 10.0 Inspection TQR 11.0 Test Control TQR 12.0 Control of Measuring&Test Equipment TQR 13.0 Handling, Storage&Shipping*~~),l)t 5~a+((83 I (f6 (t+~@4(8$'l I Jl June 10, 1986 June 10, 1986 May 10, 1988 June 10,-1986 June 10, 198.~J June 10, 1986 May 10, 1988 June 10, 1986 June 10, 1986 June 10, 1986 C 0 Z Ol CV 0 4. 11 1l l~,'I TOPICAL QUALITY ASSURANCE REPORT Rev.TABLE OF CONTENTS Date May 10, 1988 Page 2 of 2 REVISION I DATE Appendices A-Organizations 6 Figures Figure 1-1: Organization of Departments Affecting Quality B-Qualification 6 Experience Requirements for QA Personnel C-Baseline Document Matrix D-Cancelled E-List of Corporate QA Procedures (QPs)F-Topics to be Addressed in Safety Analysis Reports 10 June 10, 1986 June 10, 1984 May 7, 1982 May 10, 1988 May 7, 1982 ID CO N O 0 C 0 Z Ol N 0 IL I e p I TOPICAL QUALITY ASSURANCE REPORT Rev.12 TABLE OP CONTENTS oa e June 24, 1988 Page 1 of REVISION DATE Title Page Abstract NRC Staff Evaluation Letter Table of Contents Policy Statement Introduction Topical Quality Requirements TQR 1.0 Organization TQR 2.0 Quality Assurance Program TQR 3.0 Design Control TQR 4.0 Procurement Document Control 4 7 10 (3 8 TQR 5.0 Instruction, Procedures &Drawings 7 TQR 6.0 Document Control 5 TQR 7.0 Control of Purchased Items&Services 5 TQR 8.0 Identification &Control of Materials, 2 Parts&Components June June June June June June June June I 24, 1988 I 24, 1988 (~(9A I 24, 1988 I 24, 1988 I 24, 1988 24, 1988 24, 1988 24, 1988 June 10, 1986 3~l~+(~$h'$t June 24, 1988 t (e(, Hff1 TQR 9.0 Control of Special Processes TQR 10.0 Inspection TQR 11.0 Test Control TQR 12.0 Control of Measuring&Test Equipment TQR 13.0 Handling, Storage&Shipping TQR 14.0 Inspection, Test&Operating Status 2 June June June 10, 1985 24, 1988 10, 1986 June 10, 1986 May 10, 1988 June 10, 1986 tD 8)cu 4 10, 1988 May-(y9 June 10, 1986 June 10, 1986 0+~~g(S Qgg+11 June 10, 1986 Components TQR 16.0 Corrective Action TQR 17.0 Quality Assurance Records TQR 18.0 Audits TQR 15.0 Nonconforming Materials, Parts or ~~\I~ TOPICAL QUALITY ASSURANCE REPORT Rev.12 I TABLE OF CONTENTS Date June 24, 1988 Page 2 of 2 REVISION DATE Appendices A-Organizations 6 Figures Figure 1-1: Organization of Departments /3~Affecting Quality B-Qualification 6 Experience Requirements for Quality Assurance Personnel June 10, 1986 C-Baseline Document Matrix D-Cancelled E-List of Corporate Quality Assurance Procedures (QPs)F-Topics to be Addressed in Safety Analysis Reports 10 June 10, 1984 May 7, 1982 May 10, 1988 May 7, 1982 0~4 ill C 0 Z Ol N E o LL 4~V 4,T l r1 4 TOPICAL QUALITY ASSURANCE REPORT Rev.13 0 TABLE OP CONTENTS Date July 15, 1988 Page 1 of 2 REVISION DATE Title Page Abstract NRC Staff Evaluation Lette Table of Contents Policy Statement Introduction Topical Quality Requirements TQR 1.0 Organization TQR 2.0 TQR 3.0 Quality Assurance Program Design Control TQR 4.0 Procurement Document Control TQR 5.0 Instruction, Procedures 6 Drawings TQR 6'Document Control 10 8 7 3 8 w 4 June 24, 1988 Q g~~, tsar June 24, 1988 June 24, 1988 0~wa7,<<~June 24, 1989.~g Vl bY m~v.~16 Octa~e lO Cl OI O 0 FA C 0 2 Ol lh N E 0 U.TQR 9.0 Control of Special Processes TQR 10.0 Inspection TQR 11.0 Test Control TQR 12.0 Control of Measuring 6 Test Equipment TQR 13.0 Handling, Storage 6 Shipping TQR 14.0 Inspection, Test 6 Operating Status TQR 15.0 Nonconforming Materials, Parts or Components TQR 16.0 Corrective Action TQR 17.0 Quality Assurance Records TQR 18.0 Audits 7 4-8 TQR 7.0 Control of Purchased Items 6 Services 5 TQR 8.0 Identification 6 Control of Materials, 2 Parts 6 Components June 24, 1988 June 10, 1986 Q,4~~~a<W'ay 10, 1988 June 10, 1986 June 10, 1985 June 24, 1988 June 10, 1986>June 10, 1986 June 10, 1986.June 10, 1986 lg , A 0 TOPICAL QUALITY ASSURANCE REPORT Rev.13 TABLE OF CONTENTS July 15, 1988 Page 2 of Appendices A-Organizations &Figures Figure 1-1: Organization of Departments Affecting Quality B-Qualification &Experience Requirements for Quality Assurance Personnel C-Baseline Document Matrix D-Cancelled E-List of Corporate Quality Assurance Procedures (QPs)F-Topics to be Addressed in Safety Analysis Reports 1 I;NUMBER l REVISION DATE June 10, 1986 June 10, 1984 May 7, 1982 Oc,fares May 7, 1982 ID N I C 0 2 Ol Pi N s I 0 pr iC s>> TOPICAL QUALITY ASSURANCE REPORT Rev.14 TABLE OP CONTENTS Page October 27, 1988 of REVISION DATE Title Page Abstract)~NRC Staff Evaluation Lette&..'..-Table of Contents Policy Statement Introduction Topical Quality Requirements ,14 14 10 October 27, 1988 June 24, 1988 October 19, 1988 October 27, 1988)June 24, 1988 June 24, 1988 TQR 1.0 TQR"2.0 Organization Quality Assurance Program 14 October 27, 1988)June 24, 1988 TQR 3.0'esign Control TQR 4.0 Procurement Document Control TQR 5.0 Instruction, Procedures 6 Drawings TQR 6.0 Document Control TQR 7.0 TQR 8.0 Control of Purchased Items R Services Identification &Control of Materials, Parts 6 Components TQR 9.0 Control of Special Processes TQR 10.0 Inspection TQR 11.0 Test Control TQR 12.0 Control of Measuring t'est Equipment TQR 13.0 Handling, Storage 6 Shipping TQR 14.0 Inspection, Test 6 Operating Status TQR 15.0 Nonconforming Materials, Parts or Components October May 7 June 27, 1988)10, 1988 10, 1986 June 10, 1985 June 24, 1988 June October 10, 1986 27, 1988)October 27, 1988)June 24, 1988 October 27, 1988)October 27, 1988)June 24, 1988 June 10, 1986 tD CO N0 C C)z Ol C4 E 0)).TQR 16.0 TQR 17'TQR 18.0 Corrective Action Quality Assurance Records Audits June, 10, 1986 June 10, 1986 June 10, 1986 g7 e TOPICAL QUALITY ASSURANCE REPORT TABLE OF CONTENTS Rev.14 October 27, 1988 Page 2 Of 2 REVISION DATE Appendices A-Organizations 6 Figures Figure 1-1: Organization of Departments Affecting Quality Figure 1-2: Turkey Point Nuclear Site Organization Figure 1-3: St.Lucie Nuclear Site Organization B-Qualification 6 Experience Requirements for Quality Assurance Personnel C-Baseline.Document Matrix D-Cancelled E-List of Corporate Quality Assurance , Procedures (QPs)F-Topics to be Addressed in Safety Analysis Reports 14 October 27, 1988 I October 27, 1988 (, October 27, 1988)June 10, 1986 June 10, 1984 May 7, 1982 October 27, 1988 May 7, 1982 I Vl C 0 z Ol N E 0 IL ~, rC I, pit 1 I'4)'\t~i TOPICAL QUALHY ASKJRANCE REPORT Rev.1989 Page 1.of SUBJECT REVISION NUMBER C/N DATE Title Page Abstract NRC Staff Evaluation Letter Table of Contents Policy Statement Introduction Topical Quality Requirements TQR 1.0 Organization TQR 2.0 Quality Assurance Program TQR 3.0 Design Control TQR 4.0 Procurement Document Control 4~/g 8 3 32 J~g(l98~8-&-June 24, 1988 October h9,)9N June 24, 1988 Jun 24 1988 June 24, 1988 October 27, 1988 June 24, 1988 0~e ill C 0 Z Ol CII E 0 IL TQR 5.0 TQR 6.0 TQR 7.0 TQR 8.0 TQR 9.0 TQR 10.0 TQR 11.0 TQR 12.0 TQR 13.0 TQR 14.0 TQR 15.0 TQR 16.0 TQR 17.0 TQR 18.0 Instruction, Procedures &Drawings Document Control Control of Purchased Items&Services Identification &Control of Materials, Parts&Components Control of Special Processes Inspection Test Control Control of Measuring&Test Equipment Handling, Storage&Shipping Inspection, Test&Operating Status Nonconforming Materials, Parts or Components Corrective Action Quality Assurance Records Audits 6 6 October 27," 1988 October 27, 1988 June 24, 1988 June 10, 1986 October 27, 1988 May 10, 1988 June 10, 1986 June 10, 1985 June 24, 1988 June 10, 1986 October 27, 1988 June 10, 1986 June 10, 1986 June 10, 1986 lg g I 5C+PS.I 1 TOPICAL QUALITY ASK JRANCE REPORT Rev.~l 5 TABLE, OF CO%.'ENTS Page 2 of SUBJECT REVISION%ABER C/N DATE Appendices A-Organizations &Figures Figure 1-1: Organization of Departments Affecting Quality Figure 1-2: Turkey Point Nuclear Site Organization Figure 1-3: St.Lucie Nuclear Site Organization B-Qualification 5: Experience Requirements for Quality Assurance Personnel C-Baseline Document Matrix D-Cancelled E-List of Corporate Quality Assurance Procedures (QPs)F-Topics to be Addressed in Safety Analysis Reports Zo~~9)~~f J()~~9(($89 June 10, 1986 N June 10, 1984 May 7, 1982 October 27, 1988 May 7, 1982 ~l C f l~4t t k% TOPICAL QUALITY ASSDRAHCE REPORT QUALI'.FY ASSURANCE PEKXBULM POLICY Rev.May 10, 1988 Page 1 of]NEED FOR POLICY To avoid undue risk to the health and safety of the public and company employees, it is necessary to design, construct, operate and modify nuclear power plants with a high degree of functional integrity, quality and reliability. STATEMENT OF POLICY Co,psAQ Zt is the policy of Florida Power&Light to design, construct, operate and modify nuclear power plants of a quality level that will meet or exceed government regulations and will merit public confidence by providing electricity in a reliable, efficient and safe manner.RESPONSIBILITY The President of Florida Power&Light Company is responsible for the execution of the Quality Assurance Program for Florida Power&Light Company nuclear power plants.'he authority for developing and verifying execution of the Program is Senior delegated to the Director of Quality Assurance, through the+Vice President~Nuclear nd the Executive Vice President responsible for power generation and delivery.The head of each organization performing quality related activities is responsible for: identifying those activities within his organization which are quality related as defined by the QA Program;establishing and clearly defining the duties and responsibilities of personnel within his organization who execute those quality-related activities; and planning, selecting, and training personnel to meet the requiremeats of the QA Program.,-g9 R.E.Talion, President Florida Power&Light Compan na~1~'r pl Kll%agV~P P~'ll jt r 0 TOPICAL QUALITY ASSURANCE REPORT INTRODUCTION Rev.June 10, 1987 Page 1 Of The Topical Quality Assurance Report (FPLTQAR 1-76A)contains the description of the Florida Power 6 Light Company (FPL)Quality Assurance Program relative to its nuclear power plants.This report consists of three parts: The Introduction, which delineates the purpose and summarizes the@St<svib~scope and applicability of the Topical p eport.The second part, Topical QVhU~AssvSQpc5 Quality Requirements (TQRs), which delineate~Program requirements and summarizes the FPL approach to activities related to materials, parts, components, systems, and services included in the Quality Assurance Program.The third part, Appendices, which provide supporting statements, tabulations, and technical analyses or deviations which are not, in themselves, the subject of the report.The Topical QA Report shall be an integral part of the corporate Quality Assurance Manual (FPL-NQA-100A), and shall delineate the generic QUALLQ requirements and responsibilities by which FPL implements the corporate~g CS+Program.Revisions and changes to this Report will be made in accordance aup.<<~with a Quality Procedure as outlined in TQR 2.0.The remainder of the~p'sst 6.~a ual is comprised of Quality Procedures (QPs)which serve as the documents which describe how the interfacing of,.tasks between departments or organizations is achieved.The Quality Procedures also cover those technical elements which require a common corporate position for interfaces or resolution of problem areas.In addition to the Quality Assurance Manual, Quality Instructions (QIs)are developed as required by each of the implementing plants and departments. Quality Instructions describe the me s es to be used to implement the Quipu~Am~quality requirements of the~Manual.The Quality Instructions desc actions and responsibilities to be performed within a de or organization and address the requirements of the appro e Tog, uality Requirements, and Quality Procedures. o (<~@0'>> A c'I l' TOPICAL QUALITY ASSURANCE REPORT INTRODUCTION Rev.'une 10, 1987 Page 2 of 2 The FPL Quality Assurance Program meets the requirements provided by the NRC Regulatory Guidance and Industry Standards as listed in Appendix C of this Topical Quality Assurance Report.Qwc.i+4>soAblC8 The requirements of this Topicalpgt Report apply to'afety selated materials, parts, components, systems and structures; and to services employed for design, procurement, construction, operation, maintenance, refueling, repair, and modification. The safety related systems for each plant are specified in the respective plant Safety Analysis Report.The FPL Quality Assurance Program fully addresses the requirements of Nugu~WSv ttkQcf Appendix B to 10 CFR Part 50.The Topica Report shall be applicable to all existing nuclear plants, those under construction, and supporting FPL departments, and'ill be referenced in the Safety Analysis Report (SAR).For future plants, the description of activities, requirements, and organizational structures that are unique to a particular plant shall be addressed in the respective SAR document.CO OI D 4*ector of Quality Ass~a~q>, ,".: 'iJV PG,~i'g4~ay 8 s'h;y'ig ,vs f/'vl 4'ay'f: TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date May 10, 19S8 Page 1 of 32 GENERAL RE UIREMENTS The FPL organizational structure shall be defined such that the responsibilities for establishment and implementation of the Quality Assurance Program are clearly identified. The authority and duties of individuals and organizations performing quality assurance and quality control functions shall be described, and shall illustrate the organizational independence and authority necessary to identify problems;to initiate, recommend, or provide solutions. and to verify implementation of solutions. In addition, the description shall illustrate that persons or groups responsible for verifying the correct performance of an activity are independent of the person or groups responsible for performing the activity.IMPLEMENTATION The President of Florida Power 6 Light is ultimately responsible for the execution of the Quality Assurance Program for Florida Power R Light Company (FPL)nuclear power plants.,The authority for developing and verifying execution of the program is delegated to the Director of Quality Assurance, , the Senior Vice President Nuclear and the Executive Vice President. The reporting relationship of each department involved with the Quality Assurance Program is shown in Appendix A, Figure 1-1.4~aiig H>~SbJ~To provide for a review and evaluation of~~Program policies and activities, the President has established the orm5ittee, chaired by the Executive Vice President. This organization's responsibilities are defined in Section 1.2.1. Cp 0 I g'(1I tP g>>'f<<k P}II a$h TOPICAL QUALITY ASKJRANCE REPORT Rev.TQR 1.0 ORGANIZATION May 10, 1988 2<<32 1.2 IMPLEMENTATION: (Cont'd)In addition, a Quality Assurance Program Review Committee (QAPRC)(formerly the QA/QC Coordina4ors) has been established to review Q0A4,tH A550gkgce changes to the~Frogram aM to provide an interface for quality matters in each department affecting quality.This organization's responsibilities are defined in Section 1.2.2.The head of each department or organization performing quality>>related activities is responsible for: a)identifying those activities ~thin the organization which are quality related as~Ac-tw Nsq~M defined by the~Program; b)establishing and clearly defining the duties and responsibilities of personnel within his organization who execute those quality~related activities; and c)planning, selecting, and training personnel to meet the requirements of the QA Program.The responsibility, authority, and organizational relationship for performing quality>>related activities within each organization shall be established and delineated in organizational charts and written job or functional descriptions. @CAP~jhgd&WC Ag!Prbgram Review Committee (QAPRC)Member shall be designated by the head of each department or organization except for the Quality Assurance Committee, since this committee is a policy forming body (of which the Director of Quality Assurance is a member).The QAPRC Member is the prime interface for coordination of quality related Q~auW~o~~cE matters within the member's department, with the~Department, and with other departments. The organization chart, Appendix A, Figure 1-, i<ihsttdattgs~ P(, P'h lines of authority and areas of responsibi ity for'eReRi'ohf..'%~he pig].~organizations that are involved in quality~clat d adt&rik&C>!The"~,. g)l 1 1 S, t'~" tg I y TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.11 Date May 10, 19SS Page 3 of 32 1.2 IMPLEMENTATION (Cont'd)I Project Management organization shown in this figure is applicable during design, procurement, construction, repairs and preoperational start-up and testing of power plant and modifications of power plants (determined by management on a case-by-case basis)as described in Section 1.2.4.Below are listed the departments and organizations that have Quality Assurance , responsibilities. Specific organizational responsibilities for implementation of the.Quality Assurance Program are described in the corresponding section numbers.1.2.1 1'.2 1~2'Quality Assurance Committee Quality Assurance Program Review Committee Nuclear Energy Department-Nuclear Power Generation .-Nuclear Corporate Staff 1.2.9 Construction 1.2.10 Power Supply 1.2.11 Inventory Resources 1.2.12 Company Nuclear Review Board 1.2.13 Nuclear Fuel 1.2.14 Corporate Records Services 1.2.4 1.2.5~1.2.6 1.2.7 1.2.8 Project Management Department 1.2.15 Documentary Files Corporate Contracts Department Environmental Affairs Power Plant Engineering Purchasing 1.2.1 Quality Assurance Committee The Quality Assurance Committee, chaired by the Executive Vice President, is comprised of executive level members of management with responsibilities for the execution of the Quality Assurance Program within their responsibilities. This 0 J J TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANIZATION May 10, 1988 4<<32 1.2.1 Quality Assurance Committee (Cont')ll~s f J<c, r./Committiee's composition is.delineated in'current chartdi'nd it's repenting relationship is shown in AppendirrXPC'gpss'e:: //The Quality Assurance Committee is responsible for reviewing U~~ASM RksJC and evaluating,~P Program policies and activities. Policy changes shall be initiated when Committee findings indicate the necessity. Quality Assurance Program status reports shall be>A<<~~444J~periodicallgpregared by the Department and routed to the W ks~members of the Coeeittee or their review.uac.<~Jbsv~c6'n addition, QR'/Committee meetings shall be held by the Executive Vice President to keep members apprised of conditions including significant problems that require management attention. The Quality Assurance Committee shall be the final authority for resolution of contested quality policies, differences of opinion, and stop-work or other corrective action reqgests hen lower~leveg agreement cannot be reached CUBIC r~ASSU cd'V~(g+g C~~4 f between gP+and other departments. Periodic audits of the Quality Assurance Department shall be performed by a team CQU4~~S4~C.G'ndependent of the~p Department, which is selected and approved by the Chairman of the Quality Assurance committee. The results of this audit are presented to the Cotttmittee. up CO cu O 0 C 0 z Ol CV E I 0 U.1.2.2 Quality Assurance Program Review Committee (QAPRC)The QAPRC (formerly the QA/QC Coordinators) was formed as an organization with the resp sib'lity to review and resolve Li~Of'ecommended changes to the'rogr.is commit ee is Q,Uk i A5SU C6 V~M~u administered by the Services group.~Program changes reviewed by the QAPRC are reviewed and signed by the department L j" 1, I,(F(lt$t 3k TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATI Rev.11 Date May 1,0, 1988 age 5 of 32"""'~,'tP Q I.heads or individuals listed on each Qua'r++.Nuclear Energy responsibility for the plant begins with the 1.2.3 Nuclear Energy Department Department's acceptance of a system or portion thereof from FPL Project Management. Throughout the remainder of plant life, Nuclear Energy maintains control of and responsibility for any plant modifications coordinated by, Nuclear Energy and for the preoperational and start-up testing, operation, maintenance, refueling, and modification of the plant in accordance with written and approved procedures. The organizational structure of Nuclear Energy is shown in Appendix A, Figure 1-1.The Senior Vice President Nuclear has overall responsibility for Nuclear Energy's activities. The Senior Vice President Nuclear is designated as the Senior Corporate Nuclear Officer of Section 6.0, Administrative Controls, of each Unit's Technical Specifications. 1.2.3.1 Reporting to the Senior Vice President Nuclear are: The Site Vice President-St.Lucie, the Site Vice President-Turkey point snst the Vice president Nuclear Energy<Q~+tie Qtp'~~c+Rue(lg kssuratgN. e,.Nuclear Power Generation The Site Vice President-St. Lucie and Site Vice President-Turkey Point are accountable for the operation, maintenance, and modification of their respective nuclear plant, as well as the selection, development and direction of the assigned staff.They will act as liaison between the plants and corporate headquarters, and are accountable for ensuring that company policies and procedures are properly implemented and continued at the nuclear site. IQQt gE h ~'~~$~g~~~~~.~'~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-~~~~~~~~~~~~~~ I t',qluC i lg'i fd&or+0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION May 10, 1988 Page 7 of 32 1.2.3.1 1~5er+Soh cuu'in'Q Pageg O0 A.B+C6 l PR icon~F ('S y 1~."'o Nuclear Power Generation (Cont da g!Q,.',~.~I'!'".p crihed in the plant Technical Specificatio f NI PNSC/FRG serves the plant manager in a technical advisory ca acity for the review of all safety related procedures and activities that impact on plant safety and the facility operating license.Nuclear Corporate Staff The Vice President Nuclear Energy is responsible for'the selection, staffing, training and development of personnel required for supervisory and'perating continuity of staff groups supporting nuclear power generation. Reporting to the Vice President Nuclear Energy ar'e the Maintenance Manager Nuclear, Manager Nuclear Energy Services, the Manager of Nuclear Training, the Director of Nuclear Licensing and the Manager of Planning and Control.'he Maintenance Manager Nuclear is responsible for directing activities in support of major plant maintenance projects, modifications and upgradings, as well as the development of work methods, specifications and systems to promote increased productivity. 0: Vl E 0 z Ol C~E The Manager Nuclear Energy Services is accountable for technical staff support to the generating department and certain centralized special functions. This group consists of section supervisors and technical specialists, with functions including Health Physics, Chemistry, Radiological Waste, Emergency Planning, Plant Support, and Materials, Codes and Inspections. (\lip, A.v))t N 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANIZATIO Date May 10, 1988 Pa9e 8 of 32 1.2.3.2 They must have adequate technical and job~related skills to provide safe and efficient operation while complying with NRC requirements. /(~.,'uclear Corporate Staff (Cont'd)~:, CO...,'>>':C~'-'">>.W+: The Manager of Nuclear Tqaining'olicy)f0'QW 5'gPPiP+H g c dlgdcigt0slregarding nuclear training andgsecure the nec y resources to ensure that Nuclear Energy personnel are adequately trained.The Quality Assurance Department shall be responsible for administering the FPL Quality Assurance Program.This includes developing and verifying implementation of corporate policies, plans,'equirements, and procedures affecting quality.This'is accomplished through the Quality Assurance Department. The Quality Assurance Department retains responsibility for 4LVbgi~kCfV l~~delegated portions of the QR'Program by performing initial evaluation and subsequent periodic audits of the contractors'uaL; ~vrovze ckva t iN tissu r~~..rograms.The 5Program responsibility further extends to the performance of audits within the Company to assure management that the established requirements and procedures are being implemented, and that the Program complies with the baseline document requirements. eggs+~stifassIC ~The organizational freedom of the~function is accomplished through the corporate structure, illustrated in Appendix A, which provides independence from those departments responsible for design, procurement, engineering, construction and operation. With Quality Assurance as the sole function of this organizationally independent department, the Director of Quality Assurance and his staff, both on-site and offsite, are completely free from the cost and scheduling pressures of 'ir Vi (y>>",~0*~/gal~t 0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION May 10, 1988 n s Page 9 Of 32'Psssmiemr Cayugas+M'.:,.4".,"i::,.,'f/)(Cont'd)<<..Pg..design, procurement, construction and ope tfejj".2 Quality Assurance Department has the freedom and aut to: a)identify quality problems;b)initiate, recommend or provide corrective action;c)verify implementation of the corrective action;and d)recommend the stoppage of work or operations adverse to quality, when necessary. 58n.id@" The Director of Quality Assurance reports to thepVice President Nuclear%aoxgy, He is responsible for the technical direction and the administrative control (e.g., performance appraisal, salary review, hire/fire, position assignment) of all members of the Quality Assurance Department. The Manager of Quality'ssurance Services, the Manager of Quality Assurance Procurement 6 Reliability, the Superintendent of Quality Assurance-St.Lucie and the Superintendent of Quality Assurance-Turkey Point report administratively and functionally to the Director of Quality Assurance. The QWmL<@spur Superintandents of ecezve tec nzcal direction from the Manager of~Se vices.The Director of Quality Assurance, the Senior Vice President Nuclear, and theiVice President Nuclear Energy are each members of the Quality Assurance Commit ee.This reporting Ro tW A.$e I'ceo~regltionship and memherships on the~Camnittee assure that 9 (m msv<a~.the~+Department has airect access to the levels of management QuE4i necessary'o assure effective.p ementagion of the beaulL a(rogram.Further, the Operations Supervisors of both Turkey t pa:>A WW ll 1')'I I s Jf bh 0, TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION g.)~May 10, 1988 10 of 32 Nuclear verifying implementation of policies, plans, requirements, procedures and audits which assure compliance with the baseline documents listed in Appendix C of this Topical Quality Assurance Report.a IW cr&Pmr Germ mv r'h'qr'/r,,'r'v"./Point and gt.Lucia receive quality program'eon Cr m the~r Director of~f24)Q,(g 45$o f&uaC C!2(JQ I i+/egg yorrt~The Manager of Pk yServices directs and administers the Corporate Quality Assurance Program, including developing and The duties, responsibilities, and authorities of each Quality Assurance group are described in the sections which follow.a.Quality Assurance Services Group r0 ep Ol Vl C 0 z CV C 0 Quality Assurance Services is responsible , for the~+.L i&A5$df~aZ development and maintenance of the overall Piogram, including the following: o Develop anQ maint~n the department Quality Instructions,~+Department raini g 6 Organization C@v 44 s~rwA Manual, and the corporate Manu;including the Qg (so administration of the o'gWam evzew Committee (QAPRC)o Assist other departments in the development of Quality Instructions by review and comment and through interpretation of corporate Quality Assurance requirements; o Develop and implement a Quality Assurance indoctrination program for FPL supervisory personnel, r r 4 i'i-)I S A 4 l'~A,'$gl 4 JP' TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANIZA p.Date May 10, 1gsS Page 11 of 32 ypP~.h$v (Pglesi~CI CA'~M~,>>yet'uclear ty gp and a training program for t Assurance Department; o Prepare reports on Quality Assurance Program activities for presentation to the Quality Assurance Committee by the Manager of Quality Assurance Services;o Maintain a file system for docum tat'o of quality muv'see CA.assurance activities performed by the r ment;o Review Regulatory Guides, Codes, SAR Document Commitments and Standards for impact on the Quality Assurance Program and recommend appropriate program changes;o Review documents submitted to the Compa y Nuclear+~~l>~wrOqac Review Board (CNRB)as requested by the~pe artment CNRB member;o Plan, coordinate and implement a comprehensive system of periodic internal audits with support from the other Quality Assurance groups, when necessary; o Initiate, recommend or provide solutions and verify implementation of solutions for quality problems identified; o Review PPL originated design specifications for inclusion of appropriate quality requirements. b.Quality Assurance Procurement and Reliability Group The Manager of Procurement and Reliability is responsible for assuring the quality of safety related items and services, and their vendors, including the following: '4 lt TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANI ION"((~n;n May 10, 1988 12 Of 32 l>~'uclear emr"n,.o Assist in the development and'entation of policies, plans, requirements and procedures for the requisition and purchase of materials, equipment and services related to nuclear power plants and to the acceptance and storage of equipment and material;o Perform appropriate surveillance of hardware during manufacture; o Deymlop, mnd implement a rogrg for auditing of supplier grogr sync udlng arcoiitect/engineer/ gdi~~s.ppT~-.; "~~1 o Review and approve FPL procurement documents and changes to these documents to assure that the necessary quality requirements are imposed;o Assist other FPL departments in the identification of quality problems associated with procurement and storage;initiate, recommend, or provide solution;and verify implementation of solutions; o Review, approve and periodically audit the execution of FPL contractor quality assurance programs;o Evaluate the Quality Assurance capability of suppliers requested by Purchasing and Corporate Contracts and maintain the Quality Assurance Department"Approved Suppliers List"., o Maintain a file system for documentation of quality EpUSLI+~g g assurance activities performed by thePRpProcuremen group;The responsibility of this group, in terms of phases of procurement, begins with the preparation of the procu'rement document, extends through bid evaluation,, J 4 4 4 0<<$5 II Ilk((I hler TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANI ON May 10, 1988 13 ef 32 A.g Nuclear (cc~!.%,4p 4 I'endor selection, fabrication and shx and ends upon receipt of shipment at the operating plant or warehouse. This group, through audits and surveillances assu es that Agsd/8~the contractor's organizations performing fu ctions have sufficient autgority and organizational freedom to Lc.Meal~~implement effective progr'.Ce Quality Assurance Group-Turkey Point Qaa 44 Am~r~~The Superintendent ofjPK-Turkey Point has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: ID CII I 0 lO C 0 z Ol ee Ol E 0 L o Coordinate in the development and implementation of policies, plans, requirements, and procedures for portions of'the quality assurance program related to the operation and modification of nuclear power plants at Turkey Point Units 3 and 4 (PTN);o Perform audits, assessments and other observations at vs(j~Wsal'Q~PTN to verify compliance with~pProgram commitments,* identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement 'f spare/replacement parts, material storage, health physics, chemistry, plant security and fire protection; r'h),v<J L/(g TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZAT ON Date May 10, 1988 14 of 32 3~~.~~~~~, gp, j o Identify requirements, ensure inclu'k commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PTN through audits of FPL and contractor organizations; o Recommend stoppage of work or operations adverse to quality at PTN in accordance with the appropriate Quality Procedures; o Review and comment on Quality Instructions or equivalent quality~related administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PTN Final Safety Analysis Report, and the PTN Technical Specifications;,o Assure that the status is trac ed for'all PTN'open dual~4 S C;~~itemsidentified by the FPL~rkey Point group, and inform appropriate management when there is an indication that a commitment will not be met on time;o Maintain a file system for documentation of quality assurance activities performed by the Turkey Point group;o Assure design related activities performed by the Architect/Engineer meet the quality aspects of the contract;62~a 4 Paar o Review backfit procedures with respect to the FPL Program (for procedure review requirements see TQR 5.0);o Review site generated FPL procurement documents and changes to procurement documents in accordance with the appropriate Quality Procedures; l Af4 4p I pl'I A I E'4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANI IO~g p~, Date May 10.1989 Pa%15 of 32'Pd~~C~m~-O"';-'uclear (cont s,P<'il~~f QL4Cl&~o Perform audits of PTN'rchit Nn ineer and 0~5 ping 5/SfAN suppliers both on-site and off-site, in conjunction. with+hRHt.+un!i&kssurame Prts~re~Goalc+gsrura~C The interface with the+Procurement 6 Reliability group ends with the receipt of a shipment of nuclear safety related equipment at the plant site.The Quality Assurance program for the shipment is then within the (goo\]~~sufbwcR.purview of the~~Turkey Point group.Off-site interfaces for the resolution of quality related problems and NRC items are with Project Management, Power Plant Engineering, Nuclea<.Corporate Staff and the architect engineer and~p Quality Assurance Department. This group is called upon to audit the Turkey Point operating plant.The Turkey Point group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality~elated problems.d.Quality Assurance Group-St.Lucie (PSL)Cm(;+The Superintendent of@C St.ucie has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: o Coordinate in the development and implementation of policies, plans, requirements and procedures for portions of the quality assurance program related to the operation or modification of St.Lucie Unit 1 6 Unit 2 (PSL); ~1'F ,a~n~4' TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANI ION.,~Fr.;Date May 10,]ASS 16 of 32 ID CO N I P/ae I (pm~de Q~~Wi g, f'~z(.g,<<Pr..4 g.-o Perform audits, assessment~ an4, o ervations at GUAVA(d+f PSL to verify compliance with~+Program commitments, identify quality problems and ensure timely corrective action are taken in the areas of plant operation, Nuclear system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage,*health physics,'hemistry, plant security and fire protection; o Identify requirerpents, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PSL through audits of FPL and contractor organizations; o Maintain a file system for documentation of quality assurance qctivifies performed by the St.Lucie pPva(<~~Sgl'rojects-group;o Assure design related activities performed by the Architect Engineer meet the quality aspects of the i contract;o Review backfit procedures with respect to the FPL~Program (for procedure review requirements see TQR 5.0);o Review site generated FPL procurement documents and changes thereto, in accordance with appropriate Quality Procedures; 'eel Ma(PQ+~~o Perform audits of PSL architeotgengineer/889& 5gz48yA suppliers both on-site and off-site, conjunction Ataurpniie Prdadrq~gJirt(i,'(;Q 'Ol~e Ol 47g~h I~4 II 4f'III 1'" 6 rgCI P>yl TOPICAL QUALITY ASS CE REPORT Rev.TQR 1.0 ORGAN yyDN/Pg~'C.r,, Oate May 10, 1g88 Page 17<<32[2.3.C IP, G a+>~4~@,"."~,).Nuclear (Cont'd)o Recommend stoppage of work or operations adverse to quality at PSL in accordance with the appropriate Quality Procedures; o Review and comment on Quality Instructions or equivalent quality related administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PSL Final Safety Analysis Reports and the plant Technical Specifications; o Assure that the status is tracked for all PSL open items identified by FPL St.Lucie Projects~Jr'os, and inform appropriate management when there is an indication that a commitment will not be met on time;~(:9 Ag.~+~~The interface with the/@~Procurement 6 Reliability group ends with the receipt of a shipment of nuclear safety~elated equipment at the plant site.The Quality Assurance program for the sgipmynt is then within the purview of the St.Lucie~~9 t Wear~~Projects~ggroup.Off-site interfaces for the resolution of quality related problems and NRC items are with Project Management, Power Plant gineering, Nuclear Corporate taff and the architect engineer and~Quality Assuranue uepartment. this group is called upon to aq it the St.Lucie operating plant.The St.Lucie 64etg.~~J Projects~I group zn er ce with the Site Vice President and his staff on-site by assisting in the resolution of quality~related problems. g(ar TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.11 ORGANIZATI I a~~/W Dele May 10, 1988 18 Of 32 gl/~>p Licensing is sible for 1.2.3.2 Nuclear Corporate Staff (Cont'd)The Director of Nuclear informing appropriate management when there is an indication that a commitment will not be met on time.coordinating the NRC interface, distributing NRC documents requiring actions, evaluating potential impact and responding to all NRC action items.He is also responsible for assuring that the status is tracked for all open items identified by the NRC or other federal, local and state agencies and for 1.2.4 Project Management Department The Project Management Department, through the Project General Manager, exercises management control of assigned projects.This management control begins when a Project is assigned to the Project.Management Department and continues until the facility is accepted for operation or the project is complete.This management control includes the responsibility for coordination of specifications and requisitions, repair, construction and may include preoperational start-up and testing of power plant modifications. The Project Management Department organization is shown in Appendix A, Figure 1-1.CO Ol D The Director of Projects, reporting to the Senior Vice President, has overall responsibility for the activities of the Project Management Department. A Project General Manager, reporting to the Director of Projects, is responsible for completing the assigned project in compliance with technical C 0 z Eh Ol E 0 l'ka k 8'), 0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.Date May 10, 1gSS Page 19 of 32))(i'tj(: Q Project Nenegement (Cont and other project specifications, r the application of the provisions of the Quality Assuran e Manual during the project.The Project General Manager is responsible for obtaining corrective action from any contractor's management when corrective action cannot be obtained at the project site management level and, when necessary, can exercise his authority to stop work on project activities adverse to quality.The overall responsibility for Plant Changes and Modifications to operating plants is defined in each plant's Technical Specifications. However, frequently the work of installation and administration of Plant Changes and Modifications 's assigned to FPL Project Management Department. The Project Site Manager will report to the appropriate nuclear site Vice President but will also receive guidance and advice from the Project General Manager.The Project Site Manager is additionally responsib e for the functional direction of Chelae~~of constructioŽn 98+'for he purpose of coordinating inspection activities which implement the quality control aspects of the quality assurance program for modifications of projects assigned to project management. Activities affecting quality may be performed by FPL or contracted. Should any of these functions be contracted, the contractor may perform the activities under his own Quality Assurance Program, which must have prior approval by FPL Quality Assurance, or the contractor may directly adopt the requirements of the FPL Quality Assurance Manual.If the contractor implements the Quality Control function directly to the FPL QA Manual requirements, jjl TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZAT N Rev.11 May 10, 1988 20 Of 32 1.2e4 Project Management (Cont'd)the contractor's Quality authority and freedom to program.Control g'r/'a all have the administer ality Control Project Team Members are appointed by their home department heads as the departmental representative on the respective project, when requested by Members, other than Quality the Project General Manager.Team Assurance and Stores Department, report functionally to the Project General Manager,.or the Project Site Manager, but continue to receive administrative support and technical direction from their home department. Team members are responsible to the Project General Manager for home department support to the roject.1.2e5 Corporate Contracts Department lO CO Ol O The Corporate Contracts Department ,is responsible for generation, negotiation and issuance of ontracts over specified time periods and dollar limits for turbine generators, steam generators, nuclear steam supply systems (NSSS), new items, repairs, constructors, construction managers, and Architect Engineer (A/E)and consulting services.Corporate Contracts is also responsible for assuring that technical and quality requirements developed by others are incorporated in such contracts, as appropriate, and that these contracts have the required approvals. Details of.the activities of the department in fulfilling this responsibility shall be delineated in the appropriate Quality Procedures. The Manager of Corporate Contracts reports to the Director of Corporate Contracts. The Corporate Contracts Organization is shown in Appendix A, Figure 1-1. k Q ,sl 4C sl QS't e TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.I OR PH\~'g.e, I (>(')I Date May 1.0, 1gSS Page 21 Of 32 1.2.6\/, c~t%e~(Environmental Affairs Environmental Affairs is responsible o aining the federal and state environmental permits required or FPL facilities and operations. Environmental Affairs is responsible for overall coordination of non-radiological environmental monitoring (federal and state)programs at the nuclear power plant sites.The Manager of Environmental Technical Services, the Manager of Environmental Resources and Planning and the Manager of Environmental Permitting and Programs report to the Director of Environmental Affairs as illustrated in Appendix A, Figure 1-1.The Director of Environmental Affairs has overall responsibility for implementation ~of the Environmental Technical Specifications and Environmental Protection Plans at nuclear power plant sites.ED CO CII The Environmental Affairs Department through its management of the Company Environmental Review Group (CERG)is responsible for overall coordination of environmental monitoring programs and requirements related to the Environmental Technical Specifications and Environmental Protection Plans.The CERG provides review of proposed changes to the Environmental Technical Specifications and Environmental Protection Plans, review of any violations of monitoring and/or limitation requirements and review of proposed plant changes and modifications for environmental impact effects as requested by the plant manager(s). Z Ol CV 0 J I, g4."4'~ TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.OR Pi/Q-pg I Date Hay 10, 1988 page 22 of gyp~Lig~p.1.2.6 Environmental Affairs (Cont'd)Efjgp~The CERG provides information to the Director of Environmental Affairs and the Chairman of the CNRB on environmental matters for which requirements are included in the Environmental Technical Specifications and Environmental Protection Plans.1.2.7 Power Plant Engineering The Power Plant Engineering Department (JPE)is responsible for Nutty+~su>~~power plant design related aspects of the FPL~Program throughout all phases of plant life except as specified for the Fuel Resources Department in Section 1.2.13.This responsibility extends from initial engineering evaluations of plant design related site characteristics, through preliminary and detailed design, construction, operation and decommissioning. iD iO N JPE performs design~related activities and delegates design related activities to qualified contractors. For activities 6748(l~~gu~~performed by JPE, the work is governed by FPL's~+PPogram, and JPE is responsible for approval of the design output.Delegated act viales are performed in accordance 'ith an FPL@dual,l, j~Žsov~~approved~~rogram and the contractor is responsible for approval of design output.JPE is responsible for defining the scope of delegated activities and the r'esponsibilities of the L contractor. Prior to the release of design outputs by contractor organizations, JPE ensures that the contractor is technically qualified to perform the design related activity.2 Cll CV l~)j gl'.rI y TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date May 1O,]gsS 23 of 32 1.2.7 Power Plant Engineering (Cont'd)JPE is responsible for de~pn%nW and maintenance of the design control program governing design~related activities performed by JPE and for providing technical support to the Quality Assurance Department for assessing the:adequacy, implementation and effectiveness of contractor design control programs.JPE is responsible for the preparation, revision, approval and distribution of plant design drawings that are identified to be maintained as"agonstructed" drawings during plant operation. '5)b+c The Chief Engineer-Power Plants reports to the Senior Vice President as shown in Appendix A, Figure 1-1.1.2.8 Purchasing The Purchasing Department is responsible for the purchase of materials and services by FPL for its nuclear power plants with the exception of those materials and services secured by Corporate Contracts and Nuclear Fuels.Materials and services for nuclear safety-related application are secured only from approved suppliers, or as commercial grade, as applicable. The Department is responsible for assuring that technical and quality requirements developed by others are reviewed and approved by the designated quality departments, as applicable, are incorporated in the procurement document=which the departmen authorizes. It is responsible for maintaining ,I t4 e e I'yl k'f TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.'"gp'p, copD Date May 10, 19S8 Page 24 of 32 1.2.8 Purchasing (Cont'd)>W)~~~P-.'s JP>f'g,"qt~j>>s.+>>f, gl j Pl Xe f$~f'g~J traceability of purchase records from acceptance of requisitions through payment of the purchase order invoices.The Manager of Purchasing reports to the Director of Procurement and Materials Management who reports to the Vice President of Corporate Services, Chief Financial Officer as shown in Appendix A, Figure 1-1.1's9 Construction The Juno Construction Management Department (JCM)is responsible for providing direction and coordination regarding construction, supervision and management, equipment utilization, quality control, welding, NDE and other construction support activities. The Director of Construction reports directly to the Vice President of Engineering, Projects and Construction. He is responsible for directing and administering effective management of the department to ensure compliance to the corporate policies, practices and procedures. Reporting to the Director of Construction Management are thy M~a er of Plant constrnotion and the Manager of ConstrnotionPC, welding add NDE.The Manager of Plant Construction is responsible for providing qualified construction support personnel to the Project Site Manager.Reporting administratively to the Manager of Plant e Construction are the Construction Superintendents. v4 l i y,L(i j TOPICAL QUALITY ASSURANCE REPORT TQR l.0 Rev.ORGANIZATION Date May 10, 1998 ge 25 of 32 1.2.9 Construction (Cont'd)The Construction Superinte be bh&k4-Car~conformance of project construction activities to the requirements of specifications, codes, regulations and site procedures. He supervises the construction personnel assigned to the project, coordinates construction activities> including the scheduling of construction personnel requested by the Project Site Manager.CV The Manager of Construction Quality Control, Welding and g)E~responsible for directing and administering the Construction and Welding Programs and for the technical direction an admin'str ti e control of all personnel within the Construction p and We ing organizations. This includes the development and implementation of pol'cits, plans and procedures to meet GM i RS5v e~~~m the requirements of the rogram, codes and standards. ~;<~l Reporting to thy Ma ger of Cqnstruction g Welding and NDE 448(i Cirh.~f are the site Progec Supervisors, NDLLe e III Supervisor, FPL Welding Superintendent and a staff of~@Co rdinat:ors. 0 (.+~(Construction ~is responsible for providing inspections as required, to assure that backfit activities meet the requirements of engineering drawings, specifications, codes and standards. This responsibility extends from receipt inspections of material on-site to'acceptance of the installed items prior to turnover to the Nuclear Energy Department. It also includes verification ofconformance of an item'r activity accomplished during this period to quality requirements (e.g., records review, NDE, inspections). rQ 0 Vl C 0 z Ol~t Ol F 0 4.

TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION AA RECORD Date May 10, 1999 Page 26 of 32 1.2.9 Construction (Cont'd)!~~"~S.z s'f!f gz CO N Each nuclear power plant is assigned a Project Quality Control.faeZZ(I fss Cars~supervisor wh,o dire ts th o~-site hackfit jjzporgsnization. C}ue 4]The Project~p upervzsor reports administratively and technically to the Manager of Construction Quality Control, Welding and NDE, however, he also reports functionally to the Project Site Manager for the purpose of coordinating and scheduling inspection activities. The functional/ administrative reporting roles provide the necessary independence of the site Construction Quality Control organization and als max'zes the communication between the+el Construction staff, t e aLf and the Nuclear Energy staff.Qual+6mb t The Project PCp Supervisor is responsible for first line verification of the conformance of backfit activities to quality requirements, specifications, codes and local, State and Federal regulations,. He directs on-site implementation of Q,ua(]~~Md I the Construction ~gPrcfgram which includes supervision, and daily coordination, and scheduling of inspection activities, and review o4 inspection results.The freedom and independence.ffduS f M~(of the n-site~or anrzation to assure the effectiveness of 5het(the P o r rom pressur s of cost and scheduling is derived from the ProjecŽt~~SQpervisors administrative and tech@ice.reporting relationship to the Manager of Constructio Welding and NDE.Both the Manager of Construction Quality Control, Welding and NDE, and the Project Quality Control Supervisor have the authority to stop work or operations adverse to quality if the need arises. n rf ly if'C 4 A TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANIZATION May 10, 1988 27<<32 1.2.9 Construction (Cont'd)Ts~f v~~u~~~~I!~II~~~I~~~~~I~~II~~~~~I~I~~~Ih~I~l~~I~~I~s t a see sssa~7 g sa The NDE Level III Supervisor is responsibledor directing and monitoring the NDE activities performed under the control of the Construction Management Department. He is responsible for preparation, revision and implementation of NDE procedures, and the training, testing and qualification of the NDE personnel performing these activities. He is also responsible for providing the programs and direction for performance of NDE activities meeting the ASME, AWS and other NDE code requirements. The Quality Control Coordinators provide staff technical and d>oO4+administrative support to the Manager of Construction Welding and NDE in the prepar tion, rev'ew, issue and CPVal d monitoring of the Construction ~pr o nsure effective implementation. ID CO CV The FPL Plpldi g du~ertntendent reports to the Manager of 4tv04 Construction , Welding and NDE.His responsibilities are to develop, maintain and control the FPL Welding Control Manual, with assistance from Power'Plant Engineering, to originate and qualify welding procedure specifications and qualification of welders and welding operators to meet the applicable code requirements. He provides administrative and technical direction to the personnel within-the FPL welding control program to meet engineering welding standards and code requirements. Reporting to the FPL Welding Superintendent are the Welding Supervisors at each Nuclear site.The organization structure of the Construction Management Department is illustrated in Appendix A, Figure 1-1. 0)~l I 0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.ll Date May 10, 1988 Page 28 of 32 si~rid,>>J]Ts1IR.:.'"il'J~Jf=N f'~Within the Power Supply e a fKOTtt~y'1.2.10 Power Supply nt and services provided by the System Protection Group and Power Supply Technical Services are subject to the requirements of the Quality Assurance Program.Appendix A Figure 1-1 illustrates the'eporting relationship. System Protection is responsible for test, calibration and maintenance of certain high voltage electrical protective relays for safety>>related systems of the nuclear plant.Activities of System Protection include final wiring connection checks, preoperational check-out and test of system protection devices and providing inspection of equipment under their cognizance. Power Supply Technical Services is responsible for providing to System Protection certain setpoint and checkpoint values for protective devices.1.2.11 Inventory Resources IO CO CV The Inventory Resources Department is responsible for the receipt, handling, storage, shipping and issue of items received at the plant site for control by Inventory Resources. This responsibility encompasses spare and replacement parts and components for plant equipment through all phases of plant life. 5>>If) TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION May 10, 1988 Qe 29 of 32 1.2.11 Inventory Resources (Cont'd)During operations, Inventory additional quality related activities such as handling and segregation for nonconforming items received for stores control.The Manager of Power Plant Stores reports to the Manager of Inventory Resources who reports to the Director of Procurement and Material Management as shown in Appendix A, Figure 1-1.1.2.12 Company Nuclear Review Board The Company Nuclear Review Board (CNRB)reviews or directs the performance of reviews of activities concerning the technical aspects of the operating nuclear power plant insofar as they impact on plant safety, the health and safety of the public, and laws, regulations and licensing commitments. In addition, audits of these areas are performed under the cognizance of the CNRB.Where necessary, the Board may use consulting services to perform required reviews.The management level to which the CNRB reports is illustrated in Appendix A, Figure 1-1.Its composition is delineated in Section 6.0 of each facility's Technical Specifications. The Senior Vice President responsible for Power Delivery, Construction, Power Plant, Engineering, and Projects will perform his CNRB membership duties as Acting Group Vice President. Subjects within the purview of the Board are listed in the appropriate plant Technical Specifications. The CNRB has the authority to carry out its responsibilities by way of written action letters, verbal direction, minutes of meetings or appointed subcommittees. /.~tg 0 0 1 J grt TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date May 10, 1g88 age 30 of 32 1.2.13 Nuclear Fuel The Nuclear Fuel Section (p~j{("~" i-: Nt'IM D,p~g t~j',ff', p.$~)II 0 p1 j, p;-l~;-.-~.~j Wc4s Department is responsible for the procurement, management, and accountability of FPL's nuclear fuel assets, and for providing technical support to fuel users within FPL.The Nuclear Fuel Section is under the direction of the Manager of Nuclear Fuel who has the responsibilities described below: o Forecasting FPL's nuclear fuel requirements and the availability and price of nuclear fuel;o Preparing the procurement specifications for components of the nuclear fuel cycle;o Determining sources of supply and evaluating alternatives; o Making commercial arrangements, including contract o o 0 0 negotiations with vendors for acquisition, processing and delivery of nuclear fuel and related services for the nuclear fuel cycle;Assuring that technical and quality requirements including inputs from other FPL departments are incorporated in fuel contracts and letters of authorization and that these F documents have the necessary approvals; Administering and managing contracts for nuclear fuel and related services to assure that contractual obligations are met, and serving as FPL liaison in all matters of nuclear fuel and fuel~related contracts; Performing audits and coordinating accountability reporting on all nuclear fue 6dOe(l 4baoo ra Providing support to the epartment for their auditing of nuclear fuel design and fuel assembly manufacturing; Ega 1 TOPICAL QUALITY ASSURANCE REPORT TQR 1~0 ORGANIZATION Rev.11 Date May 10 1988 Page 31 of 32 1.2.13 Nuclear Fuel (Cont'd)o Performing fuel man es of nuclear cores to support plant licensing; o Development and/or review of fuel and nuclear physics design;o Performing the project management function with respect to nuclear fuel;o Provide and maintain benchmarked computer codes and procedures available for Fuel Resources line functions and other departments for daily use in maintaining records, performing safety analysis and core design, reporting of off-.site nuclear fuel management activities and providing economic data;o Maintain effective and controlled computer access to 0 0 0 0 Nuclear applications systems;Develop and provide, to'ppropriate FPL groups, information necessary to determine FPL's fuel~related costs and to finance fuel~related expenditures; Reviewing core related changes to Safety Analysis Reports and Technical Specifications for compliance with design criteria and regulatory requirements; Participating in start-up physics tests and providing other technical support for operating nuclear power plants;Planning, maintenance and implementation of the Corporate Special Nuclear Materials program.ID CO Ol D The Manager of Nuclear Fuel reports to the Director of Fuels as shown in Appendix A, Figure 1-1.C 0 2 Ol CV 0 U. 9 fd 4g l4',~As'V%' TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANIZATION May 10, 1988 32 e~32 1.2.14 Corporate Records Services The Manager of Corporate Records Services is responsible for:%~at:Ahac~r~~ ensuring t5e~~records program activities are managed in accordance with applicable laws and regulations; assisting with the development and implementation of effective and compatible records and micrographics programs;developing, approving and maintaining record retention schedules; establishing parameters for indexing in the corporate records computerized Record Management System (RMS);locating acceptable record storage areas when requested; storage, retrieval and control of records/documentsas reqested by other departments; leading the Q<QIPQ~su g~04, evaluation of specially designated ~g approved'torage facilities and maintaining the records of this evaluation. The Corporate Records Services organization is shown in Appendix A, Figure 1-1.1.2.15 Documentary Files The Supervisor of Documentary Files is rasvonsible for Qj~hl l p ossa~~receiving, maintaining, retrieving and storing the ecords in connection with licenses and contracts received from other departments. The Documentary Files organization is shown in Appendix A, Figure 1-1.gA RECOPD ogpu'X~AT 4 At TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 Page 1 of l.1 GENERA RE UIREMENTS The FPL organizational structure shall be defined such that the responsibilities for establishment and implementation of the Quality Assurance Program are clearly identified. The authority and duties of individuals and organizations performing quality assurance and quality control functions shall be described, and shall illustrate the organizational independence and authority necessary to identify problems;to initiate, recommend, or provide solutions; and to verify implementation of solutions. In addition, the description shall illustrate that persons or groups responsible for verifying the correct performance of an activity are independent of the person or groups responsible for performing the activity.1.2 IMPLEMENTATION The President of Florida Power 6 Light is ultimately responsible for the execution of the Quality Assurance Program for Florida Power 6 Light Company (FPL)nuclear power plants.The authority for developing and verifying execution of the program is delegated to the Director of Quality Assurance, the Senior Vice President Nuclear and the Executive Vice President. The reporting relationship of each department involved with the Quality Assurance Program is shown in Appendix A, Figure 1-1.0 C 0 2 Ol Ol 0 U.To provide for a review and evaluation of Quality Assurance Program policies and activities, the President has established the Qualit Assurance Committee, chaired by the Executive Vice Presi.'s organization's responsibilities are defined in g 1.~sg F gP I'Jl gf 1 Wl il TOPICAL QUALITY ASSURANCE REPORT TQR 1eo Rev.12 ORGANIZATION Date June 24, 1999 Page 2 of 33 1.2 IMPL19KNTATION: (Cont')In addition, a Quality Assurance Program Review Committee (QAPRC)(formerly the QA/QC Coordinators) has been established to review changes to the Quality Assurance Program and to provide an interface for quality matters in each department affecting quality.This organization's responsibilities are defined in Section 1.2.2.The head of each department or organization performing quality-related activities is responsible for: a)identifying those activities within the organization which are quality-related as defined by the Quality Assurance Program;b)establishing and clearly defining the duties and responsibilities of personnel within his organization who execute those quality-related activities; and c)planning, selecting, and training personnel to meet the requirements of the Quality Assurance Program.The responsibility, authority, and organizational relationship for performing quality-related activities within each organization shall be established and delineated in organizational charts and written job or functional descriptions. A Quality Assurance Program Review Committee (QAPRC)Member shall be designated by the head of each department or organization except for.the Quality Assurance, Committee, since this committee is a policy forming body (of which the Director of Quality Assurance is member).The QAPRC Member is the prime interface for coo'ge of quality-related matters within the memher's de en&~vP tVie Quality Assurance Department, and with other dep rtmtuith...@<~'-'he organization chart, Appendix A, Figure 1-1 gKVBst~g,Ch@~ lines oy authority and areas of responsihilit Qu>igdh e!organizations that are involved in quality-related a'es.The i~'Q C A TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12ORGANIZATION Date June 24, 1988 Page 3 of 33 1.2 IMPIJ9KNTATION (Cont'd)Project Management organization shown in this figure is applicable during design, procurement, construction, repairs and preoperational start-up and testing of power plant and modifications of power plants (determined by management on a case-by-case basis)as described in Section 1.2.4.Below are listed the departments and organizations that have Quality Assurance responsibilities. Specific organizational responsibilities for implementation of the Quality Assurance Program are described in the corresponding section numbers.1.2.1 Quality Assurance Committee 1.2.2 Quality Assurance Program Review Committee 1.2.3 Nuclear Energy Department -Nuclear Power Generation -Nuclear Corporate Staff 1.2.9 Construction 1.2.10 Power Supply 1.2.11 Inventory Resources 1.2.12 Company Nuclear Review Board 1.2.13 Nuclear Fuel 1.2.4 Project Management Department 1.2.14 Corporate Records 1.2.5 Corporate Contracts Department

1.2.6 Environmental

Affairs 1,2e7 Power Plant Engineering

1.2.8 Purchasing

Services 1.2.15 Documentary Files 1.2.1 Quality Assurance Committee iO cv The Quality Assurance Committee, chaired by the Ese gqvic President, is comprised of executive el~@s=-of management with responsibilities for thegexecugicg9'of Qg Quality Assurance Program within their r ponsibTIit~~D'&ip ~0 C 0 z Ol N 6 0 U. 4 I'Vf TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 Page 4 of 33 1.2.1 Quality Assurance Committee (Cont')Committiee's composition is delineated in its current charter and it's reporting relationship is shown in Appendix A, Figure 1-1.The Quality Assurance Committee is responsible for reviewing and evaluating Quality Assurance Program policies and activities. Policy changes shall be initiated when Committee findings indicate the necessity. Quality Assurance Program status reports shall be periodically prepared by the Quality Assurance Department and routed to the members of the Quality Assurance Committee for their review.In addition, Quality Assurance Committee meetings shall be held by the Executive Vice President to keep members apprised of conditions including significant problems that require management attention. The Quality Assuzance Committee shall be the final authority for resolution of contested quality policies, differences of opinion, and stop-work oz other corrective action requests when lower-level agreement cannot be reached between Quality Assurance or Quality Control and other departments. Periodic audits of'the Quality Assurance Department shall be performed by a team independent of the guality Assurance Department, which is selected and approved by the Chairman of the Quality Assurance committee. The results of this audit are presented to the Quality Assurance Committ gN9, s gii$(ptnwK tcvgg<H~s r r.'g't.9 we 4~(P~Np ei.I J Qtr l'k 0 ~'~l~~g~~~~~~~h 4~ai 0 0 0~~I~~~~~~~0~'~~~0~~~~~~~~~~~~~~g~~~~~~~~-~~~~~~-~~~~~~~~~~~~0~~~~~~~~0~~~~~~~~~~~~~~~~-~~~~~~~It~~~~0~~I'~ @4>K Cp w TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 Page 6 of 33 1.2.3.1 Nuclear Power Generation J The Site Vice President-St. Lucie and Site Vice President-Turkey Point are accountable for the operation, maintenance, and modification of their respective nuclear plant, as well as the selection, development and direction of the assigned staff.They will act as liaison between the plants and corporate headquarters, and are accountable for ensuring that company policies and procedures are properly implemented and continued at the nuclear site.The Plant Manager (Plant Manager Nuclear at PTN)through the Vice Presidents -Turkey Point and St.Lucie Plants (as applicable) is responsible for the operation of the nuclear plant.The plant manager is additionally responsible for the establishment and implementation of plant Quality Control policy.which implements the quality control aspects of the Quality Assurance Program.Reporting directly to the Plant Manager is the plant Quality Control Supervisor who has the authority and freedom to administer the plant Quality Control program and, when necessary, to stop activities adverse to quality.The Quality Control Supervisor, his staff, and personnel performing Quality Control inspection functions are required to be independent of groups or persons performing activities that they may be required to verify or inspect.Quality Control effort includes preparation and review of plant procedures, PCMs, qualit-related instructions and procurement documents; 'qn+Q.personnel are also responsible for insp ti~+o Bric, surveillance, and review of plant activities to veM$" o gkV g~ t.'r'll. TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1999 Page 7 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)compliance with the provisions of the facility operating license and the Quality Assurance Manual.The Quality Control Supervisor shall take corrective action for deficiencies identified, where applicable, and shall follow up on corrective action taken by other organizations until close out.He shall receive quality program direction from the Director of Quality Assurance. The Plant Nuclear Safety Committee (PNSC)at Turkey Point Plant or the Facility Review Group (FRG)at the St.Lucie Plant is comprised of key plant management and staff personnel as described in the plant Technical Specifications. The PNSC/FRG serves the plant manager in a technical advisory capacity for the review of all safety-related procedures and activities that impact on plant safety and the facility operating license.lO CO Ol The Quality Assurance Department shall be responsible for administering the FPL Quality Assurance Program.This includes developing and verifying implementation of corporate policies, plans, requirements, and procedures affecting quality.This is accomplished through the Quality Assurance Department. The Quality Assurance Department retains responsibility for, delegated portions of the Quality Assurance Program by performing initial evaluation and subsequent periodic audits of the contractors'uality Assurance Programs.The Quality Assurance Program responsibility further extends to the performance of audits within the Company to assure management that the established requirements and implemented, and that the Program compl document requirements. pp[ti,', r<i~li" N T PH)g OOCUgENT stjplgsioEB Iy Vg;I;Y~uk'-pl gt 0'g I~+p 1(p 4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION June 24, 1988 Page 8 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)The organizational freedom of the Quality Assurance function is accomplished through the corporate structure, illustrated in Appendix A, which provides independence from those departments responsible for design, procurement, engineering, construction and operation. With Quality Assurance as the sole function of this organizationally independent department, the Director of Quality Assurance and his staff, both on-site and off-site, are completely free from the cost and scheduling pressures of design, procurement, construction and operation. The Quality Assurance Department has the freedom and authority to: a)identify quality problems;')initiate, recommend or provide corrective action;c)verify implementation of the corrective action;and d)recommend the stoppage of work or operations adverse to quality, when necessary. The Director of Quality Assurance reports to the Senior Vice President Nuclear.He is responsible for the technical direction and the administrative control (e.g., performance appraisal, salary review, hire/fire, position assignment) of all members of the Quality Assurance Department. t The Manager of Quality Assurance Services, the Manager of Quality Assurance Procurement R Reliability, the Superintendent of Quality Assurance-St.Lucie and the Superintendent of Quality Assurance-Turkey Point report administratively and functionally to the Director of Quality Assurance. The Superintendents of Quality Assurance direction from the Manager of Quality A ur S i pc.f0 4'Af i THiS DO 0~~i)7 c'O p t g (L t)E 0 r gi1,'4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24,].98S Page 9 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)The Director of Quality Assurance, the Senior Vice President Nuclear, and the Vice President Nuclear Energy are each members'of the Quality Assurance Committee. This reporting relationship and memberships on the Quality Assurance Committee assure that the Quality Assurance Department has direct access to the levels of management necessary to assure effective implementation of the Quality Assurance Program.Further, the Operations Quality Control Supervisors of both Turkey Point and St.Lucie receive quality program direction from the Director of Quality Assurance. The Manager of Quality Assurance Services directs and administers the Corporate Quality Assurance Program, including developing and verifying implementation of policies, plans, requirements, procedures and audits which assure compliance with the baseline documents listed in Appendix C of this Topical Quality Assurance Report.The duties, responsibilities, and authorities of each Quality Assurance group are described in the sections which follow.a.Quality'Assurance Services Group Quality Assurance Services.is responsible for the development and maintenance of the overall Quality Assurance Program, including the following: o Develop and maintain the Quality Assurance D Quality Instructions, Quality A Training 6 Organization Manual, an (I TOPICAL QUALITY ASSURANCE REPORT TQR 1.P Rev.12 ORGANIZATION Date June 24, 198S Page 1p of 33 1.2.3.1 Nuclear Power Generation (Cont'd)Services;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Department; o Review Regulatory Guides, Codes, SAR Document Commitments and Standards for impact on the Quality Assurance Program and recommend appropriate program changes;o Review documents submitted to the Company Nuclear Review Board (CNRB)as requested by the Quality Assurance Department CNRB member;o Plan, coordinate and implement a comprehensive system of periodic internal audits with g the whe(Q c@+Q)~e~Ph)j<'<l pg~t:i>~g)c" OQC~>"~~p~aetg49 other Quality Assurance groups, Quality Assurance Manual;including the administration of the Quality Assurance Program Review Committee (QAPRC)o Assist other departments in the development of Quality Instructions by review and comment and through interpretation of corporate Quality Assurance requirements;,, o Develop and implement a Quality Assurance indoctrination program for FPL supervisory personnel, and a training program for the Quality Assurance Department; o Prepare reports on Quality Assurance Program activities for presentation to the Quality Assurance Committee by the Manager of Quality Assurance ~F TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 page 11 of 1.2.3.1 Nuclear Power Generation (Cont'd)o Initiate, recommend or provide solutions and verify implementation of solutions f or quality problems identified; o Review FPL originated design specifications for inclusion of appropriate quality requirements. b.Quality Assurance Procurement and Reliability Group The Manager of Procurement and Reliability is responsible for assuring the quality of safety-related items and services, and their vendors, including the following: o Assist in the development and implementation of policies, plans, requirements and procedures for the requisition and purchase of materials, equipment and services related to nuclear power plants and to the acceptance and storage of equipment and material;o Perform appropriate surveillance of hardware during manufacture; o Develop and implement a program for auditing of supplier Quality Assurance/Quality Control programs including architect/engineer/ Nuclear Steam Supply System Suppliers; o Review and approve FPL procurement documents and changes to t:hese documents to assure that the necessary quality requirements are imposed;o Assist other FPL departments in the identification of quality problems associated with storage;initiate, recommend, or pro verify'mplementation of solutions; TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.12 Date June 24,],9S8 Page 12 Of 33 1.2.3.1 Nuclear Power Generation (Cont'd)o Review, approve and periodically audit the execution of FPL contractor quality assurance programs;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Procurement group;o Evaluate the Quality Assurance capability of suppliers requested by Purchasing and Corporate Contracts and maintain the Quality Assurance Department"Approved Suppliers List".The responsibility of this group, in terms of phases of procurement, begins with the preparation of the procurement document, extends through bid evaluation, vendor selection, fabrication and shipment;and ends upon receipt of shipment at the operating plant or warehouse. This group, through audits and surveillances, assures that the contractors'rganizations performing Quality Assurance , functions have sufficient authority and organizational freedom to implement effective Quality Assurance programs.c.Quality Assurance Group-Turkey Point iD CO CV O The Superintendent of Quality Assurance-Turkey Point has responsibility for on-site development and implementation of the Quality Assurance Program, including the followi g: Ih C 0 z Ol CV 0 LL 4'V C Spy 1 P'I 4 TOPICAL QUALITy ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1998 Page 13 of 33 1.2.F 1 Nuclear Power Generation (Cont'd)o Coordinate in the development and implementation of policies, plans, requirements, and procedures for portions of the quality assurance program related to the operation and modification of nuclear power plants at Turkey Point Units 3 and 4 (PTN);o Perform audits, assessments and other observations at PTN to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage, health physics, chemistry, plant security and fire protection; o Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PTN through audits of FPL and contractor organizations; o Recommend stoppage of work or operations adverse to quality at PTN in accordance with the appropriate Quality Procedures; o Review and comment on Quality Instructions or equivalent quality-related administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PTN Final Safety Analysis Report, Specifications; and the cal Z Ol Ol Ar~~P't W4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 Page 14 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)o Assure that the status is tracked for all PTN open items identified by the FPL Quality Assurance Turkey Point group, and inform appropriate management when there is an indication that a commitment will not be met on time;o Maintain a file system for documentation of quality assurance activities performed by the Turkey Point group;o Assure design-related activities performed by the Architect Engineer meet the quality aspects of the contract;o Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);o Review site generated FPL procurement documents and changes to procurement documents in accordance with the appropriate Quality Procedures; o Perform audits of PTN architect engineer and Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with Quality Assurance Procurement &Reliability. The interface with the Quality Assurance Procurement 6 Reliability group ends with the receipt of a shipment of nuclear safety-related equipment at the plant site.The Quality Assurance program for the shipment is t the purview of the Quality Assurance l>*, AC 1 0 TOPICAL QUALITy ASSURANCE REPORT Rev.TQR 1.0 12 ORGANIZATION June 24, 1988 15 o<33 1.2.3.1 Nuclear Power Generation (Cont'd)Off-site interfaces for the resolution of quality-related problems and NRC items are with Project Management, Power Plant Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the Turkey Point operating plant.The Turkey Point group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-related problems.d.Quality Assurance Group-St.Lucie (PSL)The Superintendent of Quality Assurance St.Lucie has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: o Coordinate in the development and implementation of policies, plans, requirements and procedures for portions of the quality assurance program related to the operation or modification of St.Lucie Unit 1 6 Unit 2 (PSL);o Perform audits, assessments and other observations at PSL to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such refueling, inservice inspect procurement of spare/replacement p r 0 1))fgC TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.12 Date June 24, 1988 Page 16 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)storage, health physics, chemistry, plant security and fire protection; o Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PSL through audits of FPL and contractor organizations; o Maintain a file system for documentation of quality assurance activities performed by the St.Lucie Projects-Quality Assurance group;o Assure design-related activities performed by the Architect Engineer meet the quality aspects of the contract;o Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);o Review site-generated FPL procurement documents and changes thereto, in accordance with appropriate Quality Procedures; o Perform audits of PSL architect engineer/Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with Quality Assurance Procurement Reliability; o Recommend stoppage of work or operations adverse to quality at PSL in accordance with the appropriate Quality Procedures; o Review and comment-on equivalent quality-related prior to issue, with respect Quality Instructions .o administ es ,II J jt'q ig*., y}>0 TOPICAL QUALITY ASSURANCE REPORT TQR'1.0 Rev.12 0 ORGANIZATION Date June 24, 1988 Page 17 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)the FPL Quality Assurance Program, the PSL Final Safety Analysis Reports and the plant Technical Specifications; o Assure that the status is tracked for all PSL open items identified by FPL St.Lucie Projects Quality Assurance group, and inform appropriate management when there is an indication that a commitment will not be met on time;The interface with the Quality Assurance Procurement Reliability group ends with the receipt of a shipment of nuclear safety-related equipment at the plant site.The Quality Assurance program for the shipment is then within the purview of the St.Lucie Projects Quality Assurance group.Off-site interfaces for the resolution of quality-related problems and NRC items are with Project Management, Power Plant Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the St.Lucie operating plant.The St.Lucie Projects Quality Assurance group.interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-related problems.1.2.3.2 Nuclear Corporate Staff I C 0 z Cl CV E 0 4.The Vice President Nuclear Energy is selection, staffing, training and deve required for supervisory and operating con C respons'm~a 4<~, nuiQ~%58f'>k 7~H)s oo g9$Qa(.>>" C>>V N P)1ry I I TOPICAL QUALITY ASKJRANCE REPORT TQR 1.0 Rev..12 ORGANIZATION Date June 24, 1988 Page 18 of 33 1.2.3.2 Nuclear Corporate Staff (Cont'd)groups supporting nuclear power generation. Reporting to the Vice President. Nuclear Energy are the Maintenance Manager Nuclear, Manager Nuclear Energy Services, the Manager of Nuclear Training, the Director of Nuclear Licensing and the Manager of Planning and Control.The Maintenance Manager Nuclear is responsible for directing activities in support of major plant maintenance projects, modifications and upgradings, as well as the development of work methods, specifications and systems to promote increased productivity. The Manager Nuclear Energy Services is accountable for technical staff support to the generating department and certain centralized special functions. This group consists of section supervisors and technical specialists, with functions including Health Physics, Chemistry, Radiological Waste, Emergency Planning, Plant Support, and Materials, Codes and Inspections. The Manager of Nuclear Training prepares policy documents regarding nuclear training, and provides support to secure the necessary resources to ensure that Nuclear Energy personnel are adequately trained.They must have adequate technical and job-related skills to provide safe and efficient operation while complying with NRC requirements. q CBO qP p Q Vl I'l~I w/Pg Sl e t'.Ill TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 12 ORGANIZATION Date June 24, 198S Page 19<<33 1.2.3.2 Nuclear Corporate Staff (Cont'd)The Director of Nuclear Licensing is responsible for coordinating the NRC interface, distributing NRC documents requiring actions, evaluating potential impact and responding to all NRC action items.He is also responsible for assuring that the status is tracked for all open items identified by the NRC or other federal, local and state agencies and for informing appropriate management when there is an indication that a commitment will not be met on time.1.2.4 Project Management Department The Project Management Department, through the Project General Manager, exercises management control of assigned projects.lO as Ol O Vl C 0 2 Ol N E 0 This management control begins when a Project is assigned to the Project Management Department and continues until the'acility is accepted for operation or the project is complete.This management control includes the responsibility for coordination of specifications and requisitions, repair, construction and may include preoperational start-up and testing of power plant modifications. The Project Management Department organization is shown in Appendix A, Figure 1-1.VLCC.P~ps~The Pirector, of Projects, re~opting to the p~ar Pl~@~+n.ce M, f'I e+mm~~~i&T~~Wreri6eak, h s overallMespokibility for the activities of the Project Management Department. A Project General Manager, reporting to the Director of Projects, is res\completing the assigned project in compli'nce Wh h ca and other project specifications, and for th app'cj@andof'4~ '""' ~p I~I S I'4 y4 4P n7 L TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.12 Date June 24, 1988 Page 20 of 33 1.2.4 Project Management (Cont'd)the provisions of the Quality Assurance Manual during the project.The Project General Manager is responsible for obtaining corrective action from any contractor's management when corrective action cannot be obtained at the project site management level and, when necessary, can exercise his authority to stop work on project activities adverse to quality.ID CO Ol O lh C 0 z Ol C4 E 0 Site Manager will report to the appropriate nuclear site Vice President but will also receive guidance and advice from the Project General Manager.The Project Site Manager is additionally responsible for the functional direction of construction Quality Control for the purpose of coordinating inspection activities which implement the quality control aspects of the quality assurance program for modifications of projects assigned to project management. Activities affecting quality may be performed by FPL or contracted. Should any of these functions be contracted, the contractor may perform the activities under his own Quality Assurance Program, which must have prior approval by FPL Quality Assurance, or the contractor may directly adopt the requirements of the FPL Quality Assurance Manual.If the contractor implements the Qua I Control function directly to the FPL Qual'a p~o SQe isor,phyll -: th~<<-sier%le gg~-~A't<gt.9 ggp tgS~requirements, the contractor's Quality Contr l have the authority and freedom to admi i Control program.The overall responsibility for Plant Changes and Modifications to operating plants is defined in each plant's Technical Specifications. However, frequently the work of installation and administration of Plant Changes and Modifications is assigned to FPL Project Management Department. The Project 'Ejj I-1$f l; TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, lgSS Page 21 of 33.1.2.4 Project Management (Cont'd)Project Team Members are appointed by their home department heads as the departmental representative on the respective project, when requested by the Project General Manager.Team Members, other than Quality Assurance and Stores Department, report functionally to the Project General Manager, or the Project Site Manager, but continue to receive administrative support and technical direction from their home department. Team members are responsible to the Project General Manager for home department support to the project.1.2.5 Corporate Contracts Department lO CO N 0 C 0 Z Ol lh cv h 0 U.The Corporate Contracts Department 'is responsible for generation, negotiation and issuance of contracts over specified time periods and dollar limits for turbine generators, steam generators, nuclear steam supply systems (NSSS), new items, repairs, constructors, construction managers, and Architect Engineer (A/E)and consulting services.Corporate Contracts is also responsible for assuring that technical and quality requirements developed by others are incorporated in such contracts, as appropriate, and that these contracts have the required approvals. Details of the activities of the department in fulfilling this responsibility shall be delineated in the appropriate Quality Procedures. The Manager of Corporate Contracts reports to the Director of Corporate Contracts. The Corporate Contracts Organiza's shown in Appendix A, Figure 1-1.gag i p is oo.gv,R~ 'j B ,I)h II TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 12 ORGANIZATION June 24, 1988 22 Of 33 1.2.6 Environmental Affairs Environmental Affairs is responsible for obtaining the federal and state environmental permits required for FPL facilities and operations. Environmental Affairs is responsible for overall coordination of non-radiological environmental monitoring (federal and state)programs at the nuclear power plant sites.The Manager of Environmental Technical Services, the Manager of Environmental Resources and Planning and the Manager of Environmental Permitting and Programs report to the Director of Environmental Affairs as illustrated in Appendix A, Figure 1-1.The Director of Environmental Affairs has overall responsibility for implementation of the Environmental Technical Specifications and Environmental Protection Plans at nuclear power plant sites.The Environmental Affairs Department through its management of the Company Environmental Review Group (CERG)is responsible for overall coordination of environmental monitoring programs and requirements related to the Environmental Technical Specifications and Environmental Protection Plans.The CERG provides review of proposed changes to the Environmental Technical Specifications and Environmental Protection Plans, review of any violations of monitoring and/or limi requirements end review of proposed p, negggapRl modifications for environmental impact effe s asr quqs~@'~y the plant manager(s). -y)".4:."-'E"fH~.p g'Q$.9~The CERG provides information to the Director r Affairs and the Chairman of the CNRB on envir ntal matters for which requirements are included in the Environmental Technical Specifications and Environmental Protection Plans. ,ii l,,+, h rh TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12ORGANIZATION Date June 24, 3.988 Page 23 of 33 1.2.7 Power Plant Engineering The Power Plant Engineering Department (JPE)is responsible for power plant design-related aspects of the FPL Quality Assurance Program throughout all phases of plant'ife except as specified for the Fuel Resources Department in Section 1.2.13.This responsibility extends from initial engineering evaluations of plant design-related site characteristics, through preliminary and detailed design, construction,'peration and decommissioning. JPE performs design-related activities and delegates design-1 related activities to qualified contractors. For activities performed by JPE, the work is governed by FPL's Quality Assurance Program, and JPE is responsible for approval of the design output.Delegated activities are performed in accordance with an FPL approved Quality Assurance Program and the contractor is responsible for approval of design output.JPE is responsible for defining the scope of delegated activities and the responsibilities of the contractor. Prior to the release of design outputs by contractor organizations, JPE ensures that the contractor is technically qualified to perform the design-related activity.ID Cl CV O JPE is responsible for development and maintenance of the design control program governing design-related activities performed by JPE and for providing technical support to the Quality Assurance Department for assessing the adequacy, implementation and effectiveness of contractor design co programs.0 lA C 0 z Ch tg E 0 4. 4;,T p E TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Ref, Date June 24, 1g88 Page 24 of 33 1.2.4 Project Management (Cont'd)JPE is responsible for the preparation, revision, approval and distribution of plant design drawings that are identified to be maintained as"as constructed" drawings during plant operation. v;~e Presi4&-7 veev~g Ssvejnocrj +i fr geact tt sasss~~~~Ge strvct~1.2.8 Purchasing The Purchasing Department is responsible for the purchase of materials and services by FPL for its nuclear power plants with the'xception of those materials and services secured by Corporate Contracts and Nuclear Fuels.Materials and services for nuclear safety-related application are secured only from 1 approved suppliers, or as commercial grade, as applicable. The Department is responsible for assuring that technical and quality requirements developed by others are reviewed and approved by the designated quality departments, as applicable, are incorporated in the procurement document which the department authorizes. It is responsible for maintaining traceability of purchase records from acceptance of requisitions through payment of the purchase order invoices.The Manager of Purchasing reports to the Director of I Procurement and Materials Management who reports to the president of corporate Services, Chief pi'fpp+Qs i shown in Appendix A, Figure 1-1.~e gq)Q V ts.-'-". iA>-.i~ TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION June 24, 1988 Pege 25 of 33 1.2.9 Construction The Juno Construction Management Department (JCM)is responsible for providing direction and coordination regarding construction, supervision and management, equipment utilization, quality control, welding, NDE and other construction support activities. The Directgr of Construction ze orts direct3.v to the Vice i4~er Pla&President~pEngineering, Projec p and Construction. He is responsible for directing and administering effective management of the department to ensure compliance to the corporate policies, practices and procedures. Reporting to the Director of Construction Management, are the Manager of Plant Construction and the Manager of Construction Quality Control, Welding and NDE.The Manager of Plant Construction is responsible for providing qualified construction, support personnel to the Project Site Manager.Reporting administratively to the Managez of Plant Construction are the Construction Superintendents. ID EO Ol O 0 PA C 0 z'l Ol C 0 specifications, codes, regulations and site procedures Mo~Qe p@gjp~o ng Mh scgedul~g t gh>'" pffft~~QV supervises the construction personnel assign coordinates construction activities, includ of construction personnel requested by t Manager.SU The Manager of Construction Quality Control, W xng and NDE is responsible for directing and administering, the Construction The Construction Superintendent is responsible for conformance of project construction activities to the requirements of i I I'VQ't~~ja'f W I j TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 19SS Page 26 Of 33 Construction (Cont'd)Quality Control and Welding Programs and for the technical direction and administrative control of all personnel within the Construction Quality Control and Welding organizations. This includes the development and implementation of policies, plans and procedures to meet the requirements of the Quality Assurance program, codes and standards. Reporting to Welding and the Manager of Construction Quality Control, NDE are the site Project Quality Control Supervisors, NDE Level III Supervisor, FPL Welding Superintendent and a staff of Quality Control Coordinators. Construction Quality Control is responsible for providing inspections as required, to assure that backfit activities meet the requirements of engineering drawings, specifications, codes and standards. This responsibility extends from receipt inspections of material on-site to acceptance of the installed items prior to turnover to the Nuclear Energy Department. It also includes verif ication of conformance of an item or activity accomplished during this period to quality requirements (e.g., records review, NDE, inspections). >g~ggo c aR>a>i,~ctivit'ies. i~M)c~i>>pgg i (tie'uality Control, Welding and NDE, howeve functionally to the Project Site Manager f r coordinating and scheduling inspection functional/administrative reporting roles prov Each nuclear power plant is assigned a Project Quality Control Supervisor, who directs the on-site backfit Quality Control organization. The Project Quality Control Supervisor reports administratively and technically to the Manager of Constructio Pp E$'I 1)4@ TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 Page 27 of 33 1.2.9 Construction (Cont'd)independence of the site Construction Quality Control organization and also maximizes the communication between the Construction staff, the Quality Control staff and the Nuclear Energy staff.The Project Quality Control Supervisor is responsible for first line verification of the conformance of backfit activities to quality requirements, specifications, codes and local, State and Federal regulations. He directs on-site implementation of the Construction Quality Control Program which includes supervision, and daily coordination, and scheduling of inspection activities, and review of inspection results.The t freedom and independence of the on-site Quality Control organization to assure 0he effectiveness of the Quality Control Program from pressures of cost and scheduling is derived from the Project Quality Control Supervisor's administrative and technical reporting relationship to the Manager of Construction Quality Control, Welding and NDE.Both the Manager of Construction Quality Control, Welding and NDE, and the Project Quality Control Supervisor have the authority to stop work or operations adverse to quality if the need arises.The NDE Level III Supervisor is responsible for"directing and monitoring the NDE activities performed under the control of the Construction Management Department. He is responsible for preparation, revision and implementation of NDE procedures, and s the training, testing and qualification of the NDE per performing these activities. He is also Q do providing the progrems end directi fo&Qr ce.of NDE Ql wp%%)l activities'eeting the ASME, AWS and ckhei'" NDE,,~requirements. T\\J ft,~i 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 12 ORGANIZATION June 24, 1988 Page 28 of 33 1.2.9 Construction (Cont'd)The Quality Control Coordinators provide staff technical and administrative support to the Manager of Construction Quality Control, Welding and NDE in the preparation, review, issue and monitoring of the Construction Quality Control program to ensure effective implementation. The FPL Welding Superintendent reports to the Manager of Construction Quality Control, Welding and NDE.His responsibilities are to develop, maintain and control the FPL Welding Control Manual with assistance from Power Plant Engineering, to originate and qualify welding procedure specifications and qualification of welders and welding operators to meet the applicable code requirements'e provides administrative and technical direction to the personnel within the FPL welding control program to meet engineering welding standards and code requirements. Reporting to the FPL Welding Superintendent are the Welding Supervisors at each Nuclear site.The organization structure of the Construction Management Department is illustrated in Appendix A, Figure 1-1.1.2.10 Power Supply Within the Power Supply Department only equipment and services provided by the System Protection Group and Power Sup Technical Services are subject to the Quality Assurance Program.Appendix A the reporting relationship. 0~~4 ustrates k~<1O 4($Pi'(V V'42 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1988 Page 29 of 33 1.2.10 Power Supply (Cont'd)System Protection is responsible for test, calibration and maintenance of certain high voltage electrical protective relays for safety-related systems of the nuclear plant.Activities of System Protection include final wiring connection checks, preoperational check-out and test of system protection devices and providing inspection of equipment under their cognizance. Power Supply Technical Services is responsible for providing to System Protection certain setpoint and checkpoint values for protective devices.1.2.11 Inventory Resources The Inventory Resources Department is responsible for the receipt, handling, storage, shipping and issue of items received at the plant site for control by Inventory Resources. This responsibility encompasses spare and replacement parts and components 'for plant equipment through all phases of plant life.ID CV D During operations, Inventory Resources also performs additional quality-related activities such as handling and segregation for nonconforming items received for stores control.The Manager of Power Plant Stores reports to the Manager of Inventory Resources who reports to the Director of Procurement Material Management as shown in Appendix A, F 0 Vl C 0 2 Ch Ol 6 0 U. ~9 yf~Qxi E 4 h 7pI+/I TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.12 ORGANIZATION Date June 24, 1998 Page 30 of 33 1.2.12 Company Nuclear Review Board The Company Nuclear Review Board (CNRB)reviews or directs the performance of reviews of activities concerning the technical aspects of the operating nuclear power plant insofar as they impact on plant safety, the health and safety of the public, and laws, regulations and licensing commitments. In addition, audits of these areas are performed under the, cognizance of the CNRB.Where necessary, the Board may use consulting services to perform required reviews.The management level to which the CNRB reports is illustrated in Appendix A, Figure 1-1.Its composition is delineated in Section 6.0 of each facility's Technical , Specifications. The Senior Vice President responsible for Power Delivery, Construction, Power Plant Engineering, and Projects will perform his CNRB membership duties as Acting Group Vice President. Subjects within the purview of the Board are listed in the appropriate plant Technical Specifications. The CNRB has the authority to carry out its responsibilities by way of written action letters, verbal direction, minutes of meetings or appointed subcommittees. 1~2.13 Nuclear Fuel 0 C 0 z Ol CV E 0 IL The Nuclear Fuel Section (FRN)of the Fuel Resources Department is responsible for the procurement, management, and accountability of FPL's nuclear fuel assets, and for providing technical support to fuel users within FPL.Section is under the direction of the Mana who has the responsibilities described below 6 4 TOPICAL QUALITY ASSURANCE REPORT TQR 1eo ORGANIZATION Rev.12 Date June 24, 1988 Page 31 of 33 1.2.13 Nuclear Fuel (Cont'd)I o Forecasting FPL's nuclear fuel requirements and the availability and price of nuclear fuel;o Preparing the procurement specifications for components of the nuclear fuel cycle;o Determining sources of supply and evaluating alternatives; o Making commercial arrangements, including contract negotiations with vendors for acquisition, processing and delivery of nuclear fuel and related services for the nuclear fuel cycle;o Assuring that technical and quality requirements including inputs from other FPL departments are incorporated in fuel contracts and letters of authorization and that these documents have the necessary approvals; o Administering and managing contracts for nuclear fuel and related services to assure that contractual obligations are met, and serving as FPL liaison in all matters of nuclear fuel and fuel-related contracts; o Performing audits and coordinating accountability reporting on all nuclear fuel;o Providing support to the Quality Assurance Department for their auditing of nuclear fuel design and fuel, assembly manufacturing; o Performing fuel management and safety analyses of nuclear 0 lh C 0 Z (h~s N E 0 U.o 0 0 cores to support plant licensing; Development and/or review of fuel and nuclear design;Performing the project management nc wQh-respect to nuclear fuel;Provide and maintain benchmarke comqptepQcddes ~ape@>>procedures available for Fuel Resour k'iuu&Qduibur.~ '7 I it I'Fit t 1 gV pi'I I Nf'-1A TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.ORGANIZATION Date June 24 19SS Page 32 of 33 1.2.13 Nuclear Fuel (Cont'd)and other departments for daily use in maintaining records, performing safety analysis and core design, reporting of off-site nuclear fuel management activities and providing economic data;o Maintain effective and controlled computer access to Nuclear applications systems;o Develop and provide, to appropriate FPL groups, 0 0 0 information necessary to determine FPL's fuel-related costs and to finance fuel-related expenditures; Reviewing core-related changes to Safety Analysis Reports and'Technical Specifications for compliance with design criteria and regulatory requirements; Participating in start-up physics tests and providing other technical support for operating nuclear power plants;Planning, maintenance and implementation of the Corporate Special Nuclear Materials program.The Manager of Nuclear Fuel reports to the Di shown in Appendix A, Figure 1-1.1.2.14 Corporate Records Services ecto/f IlIZegpg 0 p~P~)h Y4~.c 1 fB~3l~rpo)()Q~DO~+~<>~,pr.gg'980 lO CO Ol The Manager of Corporate Records Se'rvices is responsible for: ensuring the Quality Assurance records program activities are managed in accordance with applicable laws and regulations; assisting with the development and implementation of effective and compatible records and micrographics programs;developing, approving and maintaining record retention.schedules; establishing parameters for indexing in the corporate records' t gl TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 12 ORGANIZATION Date June 24,]988 Page 33 of 33 1.2.14 Corporate Records Services (Cont'd)computerized Record Management System (RMS);locating acceptable record storage areas when requested; storage, retrieval and control of records/documents as reqested by other departments; leading the evaluation of specially designated"Quality Assurance approved" storage facilities and maintaining the records of this evaluation. The Corporate Records Services organization is shown in Appendix A, Figure 1-1.I 1.2.15 Documentary Files The Supervisor of Documentary Files is responsible for receiving,'aintaining, retrieving and storing the Quality Assurance records in connection with licenses and contracts received from other departments. The Documentary Files organization is shown in Appendix A, Figure 1-1. ,J I i~1 2t I J,4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 1 of 33 1.1 GENEKK RE UIREMENTS The FPL organizational structure shall be defined such that the responsibilities for establishment and implementation of the Quality Assurance Program are clearly identified. The authority and duties of individuals and organizations performing quality assurance and quality control functions shall be described, and shall illustrate the organizational independence and authority necessary to identify problems;to initiate, recommend, or provide solutions; and to verify implementation of solutions. In addition, the description shall illustrate that persons or groups responsible for verifying the correct performance of an activity are independent of the per~s 1.2 or groups responsible for performing the act IHPIBDIENTATION The President of Florida Power 6 Light is ult the execution of the Quality Assurance Progr~~'!~Q V:~p~gfwll i~'++c Q sJ'~t'jop@Q'rida Power 6 Light Company (FPL)nuclear power plants.The authority for developing and verifying execution of the program is delegated to the Director of Quality Assurance, the Senior Vice President Nuclear and the Executive Vice President. The reporting relationship of each department involved with the Quality Assurance Program is shown in Appendix A, Figure 1-1.To provide for a review and ebaluation of Quality Assurance Program policies and activities, the President has established the Quality Assurance Committee, chaired by the Executive Vice President. This organization's responsibilities are defined in Section 1.2.1.C 0 2 Ol Ol E 1 0 pre rk'Il'E~5h I ~~~g~~~~~~~I I'I'~~~~~~~~~~~-~~~~~~~~~~~~~~~~~~~~~g~~~~~~~~~~~~~~~~-~~~~~ C>>\gji Ig I C TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.13 July 14, 1988 Page 3 of 33 1.2 IMPL1FMENTATION (Cont'd)Project Management organization shown in this figure is applicable during design, procurement, construction, repairs and preoperational start-up and testing of power plant and modifications of power plants (determined by management on a case-by-case basis)as described in Section 1.2.4.Below are listed the departments and.organizations that have Quality Assurance responsibilities. Specific organizational responsibilities for implementation of the Quality Assurance Program are described in the corresponding section numbers.1.2.1 Quality Assurance Committee 1.2.2 Quality Assurance Program 1.2.3 1.2.4 Review Committee Nuclear Energy Department -Nuclear Power Generation -Nuclear Corporate Staff Project Management Department 1.2e5 Corporate Contracts Department

1.2.6 Environmental

Af f airs 1.2Fg 8 Co 1.2.Po 1.2.OIn 1.2 Pf/(Co I;.!RECORD 0 P';~P, q Fl 1 4 C I I T struction--:~'a 9"""-.gdgggggED E J ny Nuclear Review Board 1.2 Q/2Ruclear Fuel 1.2 Pl//Corporate Records Services 1.2.Q/f2!ocumentary Files 1.j2f7 Fcuhra i sgn 1.2.1 Quality Assurance Committee The Quality Assurance Committee, chaired by the Executive Vice President, is comprised of executive level members-of management with responsibilities for the execution of the Quality Assurance Program within their responsibilities. This e l<1 E'hi 1 l U TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 4 of 33 1'.2.1 Quality Assurance Committee (Cont'd)Committiee's composition is delineated in its current charter and it's reporting relationship is shown in Appendix A, Figure The Quality Assurance Committee is responsible for reviewing and evaluating Quality Assurance Program policies and activities. Policy changes shall be initiated when Committee findings indicate the necessity. Quality Assurance Program status reports shall be periodically prepared by the Qua>ity-Assurance Department and routed to the membe'Fs ofl thePQual~i@.'a Assurance Committee for their review.J$~~,'.l;its In addition, Quality Assurance Committee meetihgs s 1 by the Executive Vice President to keep me e3sV conditions including significant problems that require management attention. The Quality Assurance Committee shall be the final authority for resolution of contested quality policies, differences of opinion, and stop-work or other corrective action requests when lower-level agreement cannot be reached between Quality Assurance or Quality Control and other'epartments. Periodic audits of the Quality Assurance Department shall be performed by a team independent of the Quality Assurance Department, which is selected and approved by the Chairman of the Quality Assurance committee. The results of this audit are presented to the Quality Assurance Committee. gH TOPICAL QUALITY ASSURANCE REPORT TQR l.0 Rev.ORGANIZATION July 14, 1988 Page 5 of 33 1~2.2 Quality Assurance Program Review Committee (QAPRC)The QAPRC (formeriy the QA/QC Coordinators) was formed as an organization with the responsibility to review and resolve recommended changes to the Quality Assurance Program.This committee is administered by the Quality Assurance Services group.Quality Assurance Program changes reviewed by the QAPRC are reviewed and signed by the department heads or individuals listed on each Quality Procedure. 1.2.3 Nuclear Energy Department Nuclear Energy responsibility for the plant begins with the Department's acceptance of a system or portion thereof from FPL Project Management. Throughout the remainder of plant life, Nuclear Energy maintains control of and responsibility for~ay plant modifications coordinated by Nuclear'energy:;ant:foPIthecJ ~)X t~preoperatzonal and start-up testa.ng, operat eon,-magqtenaAqe, V'1<v.ti:~-'efueling,, and modification of the plant n accor+nre~yjggt written and approved procedures.

I aII g f~l.The organizational structure of Nuclear Energy is shown in Appendix A, Figure l-l.The Senior Vice President Nuclear has overall responsibility for Nuclear Energy's, activities.

The Senior Vice President Nuclear is designated as the Senior Corporate Nuclear Officer of Section 6.0, Administrative Controls, of each Unit's Technical Specifications. Cl CV P O I C 0 z Oi N 0 IL Reporting to the Senior Vice President Nuclear are: The Site Vice President-St.Lucie, the Site Vice President-Turkey Point, the Vice President Nuclear Energy, Executive Assistant, and the Director of Quality Assurance. F E 4~4,'% TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Ju]y j.4 19SS Page 6<<33 1.2.3.1 Nuclear Power Generation The Site Vice President-St. Lucie and Site Vice President-Turkey Point are accountable for the operation, maintenance,'nd modification of their respective nuclear plant, as well as the selection, development and direction of the assigned staff.They will act as liaison between the plants and corporate headquarters, and are accountable-o eas that company policies and procedures are prop and continued at the nuclear site.The Plant Manager (Plant Manager Nuclear at Vice Presidents -Turkey Point and St.L ere PXants (as applicable) is responsible for the operation of the nuclear plant.The plant manager is additionally responsible for the establishment and implementation of plant Quality Control policy which implements the quality control aspects of the Quality Assurance Program.ID CO Ol 0 Reporting directly to the Plant Manager is the plant Quality'ontrol Supervisor who has the authority and freedom to administer the plant Quality Control program and, when necessary, to stop activities adverse to quality.The Quality Control Supervisor, his.staff, and personnel performing Quality Control inspection functions are required to b'e independent of groups or persons performing activities that they may be required to verify or inspect.Quality Control effort includes preparation and review of plant procedures, PCMs, quality-related instructions and procurement documents; Quality Control personnel are also responsible for inspection, monitoring, surveillance, and review of plant activities to verify 2 Ol~i cv ~i'iL 1'X a'E VN C~ TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 13 ORGANIZATION July 14, 1988 Page 7 of 1.2.3.1 Nuclear Power Generation (Cont'd)compliance with the provisions of the facility operating license and the Quality Assurance Manual.The Quality Control Supervisor shall take corrective action for deficiencies identified, where applicable, and shall follow up on corrective action taken by other organizations until cl receive quality program direction from the Assurance. pE Riv!Af JEST The Plant Nuclear Safety Committee (PNSC)at TH IS DOCU Wl E NT or the Facility Review Group (FRG)at the t'SWFPRS44 E 0 comprised of key plant management and staff personnel as described in the plant Technical Specifications. The PNSC/FRG serves the plant manager'n a technical advisory capacity for the review of all safety-related procedures and activities that impact on plant safety and the facility operating license.The Quality Assurance Department shall be responsible for administering the FPL Quality Assurance Program.This includes developing and verifying implementation of corporate policies, plans, requirements, and procedures affecting quality.This is accomplished through the Quality Assurance Department. The Quality Assurance Department retains responsibility for delegated portions of the Quality Assurance Program by performing initial evaluation and subsequent periodic audits of the contractors'uality Assurance Programs.The Quality Assurance Program responsibility further extends to the performance of audits within the Company to assure management that the established requirements and procedures are being implemented, and that the Program complies with the baseline document requirements. )'J ter et'll V~l Jf I~ TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION July 14, 1988 I 1 Of 33 1.2.3.1 Nuclear Power Generation (Cont'd)The organizational freedom of the Quality Atssiu:ance-&nctMIT is accomplished through the corporate structure, illustrated in Appendix A, which provides independence from those departments responsible for design, procurement, engineering, construction and operation. With Quality Assurance as the sole function of this organizationally independent department, the Director of Quality Assurance and his staff, both on-site and off-site, are completely free from the cost and scheduling pressures of design, procurement, construction and operation. The Quality Assurance Department has the freedom and authority to: a)identify quality problems;b)initiate, recommend or provide corrective action;c)verify implementation of the corrective action;and d)recommend the stoppage of work or operations adverse to quality, when necessary. The Director of Quality Assurance reports to the Senior Vice President Nuclear.He is responsible for the technical direction and the administrative control (e.g., performance appraisal, salary review, hire/fire, position assignment) of all members of the Quality Assurance Department. The Manager of Quality Assurance Services, the Manager of Quality Assurance Procurement &Reliability, the Superintendent of Quality Assurance-St.Lucie and the Superintendent of Quality Assurance-Turkey Point report administratively and functionally to the Director of Quality Assurance. The Superintendents of Quality Assurance receive technical direction from the Manager of Quality Assurance Services. 1$V TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 ORGANIZATION July 14, 1988 Page-9 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)The Director of Quality Assurance, the S Nuclear, and the Vice President Nuclear Ene of the Quality Assurance Committee. relationship and memberships on the Quality Assurance Committee assure that the Quality Assurance Department has direct access to the levels of management necessary to assure effective implementation of the Quality Assurance Program.Further, the.Operations Quality Control Supervisors of both Turkey Point and St.Lucie receive quality program direction from the Director of Quality Assurance. The Manager of Quality Assurance Services directs and administers the Corporate Quality Assurance Program, including developing and verifying implementation of policies, plans, requirements, procedures and audits which assure compliance with the baseline documents listed in Appendix C of this Topical Quality Assurance Report.The duties, responsibilities, and authorities of each Quality Assurance group are described in the sections which follow.a.Quality Assurance Services Group ID CO Ol P D Quality Assurance Services is responsible for the development and maintenance of the overall Quality Assurance Program, including the following: o Develop and maintain the Quality Assurance Department Quality Instructions, Quality Assurance Department Training 6 Organization Manual, and the corporate fs 4" i4 iD(~tv' TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 13 ORGANIZATION July 14, 1988 Pege 10 Of 33 1.2.3.1 Nuclear Power Generation (Cont'd)Quality Assurance Manual;including the administration of the Quality Assurance Program Review Committee (QAPRC),, o Assist other departments in the development of Quality Instructions by review and comment and through interpretation of corporate Quality Assurance requirements; o Develop and implement a Quality Assurance indoctrination program for FPL supervisory personnel,/and a training program for the Quality Assurance Department; o Prepare reports , on Quality Assurance Program activities for presentation to the Quality Assurance Committee by the Manager of Quality Assurance Services;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Department; o Review Regulatory Guides, Codes, SAR Document Commitments and Standards for impact on the Quality Assurance Program and recommend appropriate program changes;o Review documents submitted to the Company Nuclear Review Board (CNRB)as ,requested by the Quality ID Ol D Assurance Department CNRB member;o Plan, coordinate and implement a of periodic internal audits other Quality Assurance groups, comprehem eqp+Rm t:ne en necessary; I Vl C 0 2 Oh cv 0 4. n'I lg f;h 0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION July 14, 1988 Page 11 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)b.o Initiate, recommend or provide solutions and verify implementation of solutions for quality problems identified; o Review FPL originated design specificat inclusion of appropriate quality requir men%6;~Quality Assurance psccurement and Reliabili fr~'QOC4'"'qgt94'3 The Manager of Procurement and Reliability sees for assuring the quality of safety-related items and I services, and their vendors, including the following: 0 I/I C 0 2 Ol Ol 0 IL o Assist in the, development and implementation of policies, plans, requirements and procedures for the requisition and purchase of materials, equipment and services related to nuclear power plants and to the acceptance and storage of equipment and material;o Perform appropriate surveillance of hardware during manufacture; o Develop and implement a program for auditing of supplier Quality Assurance/Quality Control programs including architect/engineer/ Nuclear Steam Supply System Suppliers; o Review and approve FPL.procurement documents and changes to these documents to assure that the necessary quality requirements are imposed;o Assist other FPL departments in the identification of quality problems associated with procurement and storage;initiate, recommend, or provide solution;and'verify implementation of solutions; 1 0~1'l Ef I~, TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13ORGANIZATION Date July 14, 1988 Page 12 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)o Review, approve and periodically audit the execution of FPL contractor quality assurance programs;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Procurement group;o Evaluate the Quality Assurance capability of suppliers requested by Purchasing and Corporate Contracts and maintain the Quality Assurance Department"Approved Suppliers List".The responsibility of this group, in terms of phases of procurement, begins with the preparation of the procurement document, extends through bid evaluation, vendor selection, fabrication and shipment;and ends upon receipt of shipment at the operating plant or warehouse. This group, through audits and surveillances, assures that the contractors'rganizations performing Quality Assurance functions have sufficient authority and organizational freedom to implement effective Quality Assurance programs.c.Quality Assurance Group-Turkey Point ID Ol C The Superintendent of Quality, Assurance-Turkey Point has sponsibility for on-site development and implementation the Quality Assurance Program, including the following: C 0 z Ol N E 0 U. 4'1 t s TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.13 July 14, 1988 Page 13 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)o Coordinate in the development and implementation of policies, plans, requirements, and procedures for portions of the quality assurance program related to the operation and modification of nuclear power plants at Turkey Point Units 3 and 4 (PTN);o Perform audits, assessments and other observations at PTN to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such azeas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage, health physics, chemistry, plant secuzity and fire protection; o Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Pzogram during the backfit activities at PTN through audits of FPL and contractor organizations; 0 Recommend stoppage of work or operations adverse to quality at PTN in accordance with the appropriate Quality Procedures; o Review and comment on Quality Instructions or equivalent quality-related. administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PTN Final Safety Analysis Report, and the PTN Technical Specifications; D~0 g e il If'I 1 h1 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION July 14, 1988 Pa98 14 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)o Assure that the status is tracked for all PTN open items identified by the FPL Quality Assurance Turkey Point group, and inform appropriate management when there is an indication that a commitment will not be met on time;o Maintain a file system for documentation of quality assurance activities performed by the Turkey Point group;o Assure design-related activities performed by the Architect Engineer meet the quality aspects of the contract;o Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);o Review site generated FPL procurement documents and changes to procurement documents in accordance with the appropriate Quality Procedures; o Perform audits of PTN architect engineer and Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with Quality Assurance Procurement 6 Reliability. ID CO N'P O Vl C 0 Z Ol Ol E 0 T interface with the Quality Assurance Procurement 6 Rel'ability group ends with the.receipt of a shipment of nucl ar safety-related equipment at the plant site.The ,~<q'Qikli Assurance program for the shipment is then within gO ygQQu view oy the Quality Assurance Turkey point group.(.i>,$9.Ž'V l ying t I 1 1[i'+pl TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 13 ORGANIZATION July 14, 1988 15 o<33'C 1.2.3.1 Nuclear Power Generation (Cont'd)Off-site interfaces for the resolution of quality-related problems and NRC items are, with Project Management,~~gv~l~~Engineering, Nuclear.Corporate Staff and the, architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the Turkey Point operating plant.The Turkey Point group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-related problems.d.Quality Assurance Group-St.Lucie (PSL)The Superintendent of Quality Assurance St.Lucie has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: 'I ,Ki 9 o Coordinate in the development and implementation of policies, plans, requirements and procedures for portions of the quality assurance program related to the operation or modification of St." Lucie Unit 1 G Unit 2 (PSL);o Perform audits, assessments and other observations at PSL to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system urnover, modification and maintenance; including such areas as refueling, inservice inspection .and testing, procurement of spare/replacement parts, material Ch C4 gP E 0 TOPICAL QUALITy ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 16<<33, 1.2.3.1 Nuclear Power Generation (Cont'd)storage, health physics, chemistry, plant security and fire protection; o Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PSL through audits of FPL and contractor organizations; 0 Maintain a file system for documentation of quality assurance activities performed by the St.Lucie Projects-Quality Assurance group;o Assure design-related activities performed by the Architect Engineer meet the quality aspects of the 0 0 contract;Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);r Review site-generated FPL procurement documents and changes.thereto, in accordance with appropriate 'uality Procedures; o Perform audits of PSL architect engineer/Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with Quality Assurance Procurement Reliability; o Recommend stoppage of work or operations adverse to quality at PSL in accordance with the appropriate Quality Procedures; Review and comment on Quality Instructions or J equivalent quality-related administrative procedures prior to issue, with respect to the requirements of V'v i~lg ty TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 19SS Page 17 of 33 1.2.3.1 Nuclear Power Generation (Cont'd)the FPL Quality Assurance Program, the PSL Final Safety Analysis Reports and the plant Technical Specifications; o Assure that the status is tracked for all PSL open items identified by FPL St.Lucie Projects Quality Assurance group, and inform appropriate management when there is an indication that a commitment will not be met on time;The interface with the Quality Assurance Procurement Reliability group ends with the receipt of a shipment of nuclear safety-related equipment at the plant site.The Quality Assurance program for the shipment is then within the purview of the St.Lucie Projects Quality Assurance group.Off-site interfaces for the resolution of quality-related M~c aalu problems and NRC items are with Project Management, Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the St.Lucie operating plant.The St.Lucie Projects Quality Assurance group assisting in the resolution of quality-related problems..1~'2'.3.?.~+ear Corporate Staff)The Vice President Nuclear Energy is responsible for the selection, staffing, training and development of personnel required for supervisory and operating continuity of staff I V 4 tr Fy~ly TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 13 e ORGANIZATION Date Ju].y]4, 1988 Page 18 Of 33 1.2.3.2 Nuclear Corporate Staff (Cont'd)/~de+I'3 p Pg>groups supporting nuclear power gengratiog. Reporting to the, Qt r ec~&vcleav C~tMerihqz Vice President Nuclear Energy are they Maintenance Manager Nuclear, Manager Nuclear Energy Services, the Manager of Nuclear Training, the Director of Nuclear Licensing and the Manager of Planning and Control.The Maintenance Manager Nuclear is responsible for directing activities in support of major plant maintenance projects, modifications and upgradings, as well as the development of work methods, specifications and systems to promote increased productivity. The Manager Nuclear Energy Services is accountable for technical staff support to the generating department and certain centralized special functions. This group consists of section supervisors and technical specialists, with functions including Health Physics, Chemistry, Radiological Waste, Emergency Planning, Plant Support, and Materials, Codes and Inspections. z Ol N The Manager of Nuclear Training prepares policy documents regarding nuclear training and provides support to secure the ecessary resources to ensure that Nuclear Energy personnel are a equately trained.They must have adequate technical and job-r lated skills to provide safe and e'fficient operation while;,~~gem lying with NRC requirements. N u cl~iv G~g~ec (~ig cL r ccats'1~P~~~~cks cLurs~Cam+r~~0i~ a 4 oP~~~~*4yjipe.~ft acid'hf(+coal.y&i<iw 0~g c'<l i4lol.~pn~~<~otst~gg~Qr~y~~t~B~)i a<~l'-l~g$&eclulgg M g~vclgsqz~~~~l(an.4M~Pgg<l&~~I e)u)~~~.

s~+~~~~~+~.'2, r,~g~~>.a p p(~m~j~~~cA C~M(pJ~~(en~a;v~As~cooke;~a&s p (g am<n.CLZrnn.~my+'~f t~~~4 c~W (.a+t 4+~~Q.(~g~~g+'~a~d CaS~c<nn.~a (h.u cL~~>cc~r~~a smn~((+~A r~4~r~)~<~f'<fl~5 RlV~M Vga%~Bjrl~~~+-~.K~QC4 cr p g uC.(~~I'~p~~W~c jK~y~o+p(~~>-.>msp~s',(,~< ~<~>~~i~~+i~g W~ov Qrd (ge v e~c[~mP th (l~o 4W,~og~QQ~~gaol(cq Qr 4 e Qu~(ee li II'I I$F lt'~, 4*4 Q,r,y TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date Ju]y]4]988 Page 19 of 33 1.2.3.2 Nuclear Corporate Staff (Cont'd)The Director of Nuclear Licensing is responsible for coordinating the NRC interface, distributing NRC documents requiring actions, evaluating potential impact and responding to all NRC action items.He is also responsible for assuring that the status is tracked for all open items identified by the NRC or other federal, local and state agencies and for informing appropriate management when there is an indication that a commitment will not be met on time.>gyp'a~y.~p~'.2.4 Project Management Department The Project Management Department, through the Project General Manager, exercises management control of assigned projects.This management control begins when a Project is assigned to the Project Management Department and continues until the facility is accepted for operation,or the project is complete.This management control includes the responsibility for coordination of specifications and requisitions, repair, construction and may include preoperational start-up and testing of power plant modifications. The Project Management Department organization is shown in Appendix A, Figure 1-1.9 lfCc~~~i-~Q The Director of Prqjects, reporting to the'l~t~4l~.',","hhs overall responsibility for the activities of the Project'QQa ement Department. A Project General Manager, reporting to~~i,~.'g.~+e Director of Projects, is responsible for completing the assigned project in compliance with technical and other project r' TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 20 of 33 Project Management (Cont'd)specifications, and for the application of the provisions of the Quality Assurance Manual during the project.The Project General-Manager is responsible for obtaining corrective action I from any contractor's management when corrective action cannot be obtained at the project site management level and, when necessary, can exercise his authority to stop work on project activities adverse to quality.The overall responsibility for Plant Changes and Modifications to operating plants is defined in each plant's Technical Specifications. However, frequently the work of installation and administration of Plant Changes and Modifications is assigned to FPL Project Management, Department. The Project Site Manager will report to the appropriate nuclear site Vice President but will also receive guidance and advice from the Project General Manager.The Project Site Manager is additionally responsible, for the functional direction of construction Quality Control for the purpose of coordinating inspection activities which implement the quality control aspects of the quality assurance program for modifications of projects assigned to project management. Activities affecting quality may be performed by FPL or contracted. Should any of these functions be contracted, the contractor may perform the tivities under his own Quality Assurance Program, which must e prior approval by FPL Quality Assurance, or the contractor directly adopt the requirements of the FpL Quality surance Manual.If the contractor implements the Quality Control function directly to the FPL Quality Assurance Manual requirements, the contractor's Quality Control Supervisor shall have the authority and freedom to administer the Quality Control program. P'1 l~~0 gg gl 4>P Sp TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 1.0 13 ORGANIZATION July 14, 1988 Pa9e 21 of 33 1.2.4 Project Management (Cont'd)Project Team Members are appointed by their home department heads as the departmental representative on the respective project, when requested by the Project General Manager.Team Members, other than Quality Assurance and Stores Department, report functionally to the Project General Manager, or the Project Site Manager, but continue to receive administrative support and technical direction from their home department. Team members are responsible to the Project General Manager for home department support to the project.1.2.5 Corporate Contracts Department M't The Corporate Contracts Department is responsible for generation, negotiation and issuance of contracts over specified time periods and dollar limits for turbine generators, steam generators, nuclear steam supply systems (NSSS), new items, repairs, constructors, construction managers, and Architect Engineer (A/E)and consulting services.Corporate Contracts is also responsible for assuring that technical and quality requirements developed by others are incorporated in such contracts, as appropriate, and that these contracts have the required approvals. Details of the activities of the department in fulfilling this responsibility shall be delineated in the appropriate Quality Procedures. The Manager of Corporate Contracts reports to the Director of Corporate Contracts. The Corporate Contracts Organization is own in Appendix A, Figure 1-1.C 0 2 Ol CV s 0 LL V 1~4 0 TOPICAL QUALITY ASSURANCE REPORT TQR le0 Rev.13 s ORGANIZATION Date July 14, 1988 Page 22 of 33 1.2.6 Envir'onmental Affairs Environmental Affairs is responsible for obtaining the federal and state environmental permits required for FPL facilities and operations. Environmental Affairs is responsible for overall coordination of non-radiological 'environmental monitoring (federal and state)programs at the nuclear power plant sites.The Manager of Environmental Technical Services, the Manager of Environmental Resources and Planning and the Manager of Environmental Permitting and Programs report to the Director of Environmental Affairs as illustrated in Appendix A, Figure 1-1.The Director of Environmental Affairs has overall responsibility for implementation of the Environmental Technical Specifications and Environmental Protection Plans at nuclear power plant sites.The Environmental Affairs Department through its management of the Company Environmental Review Group (CERG)is responsible for overall coordination of environmental monitoring programs and requirements related to the Environmental Technical Specifications and Environmental Protection Plans.The CERG provides review of proposed changes to the Environmental Technical Specifications and Environmental Protection Plans, review of any violations of monitoring and/or limitation quirements and review of proposed plant changes and~Q mo ifications for environmental impact effects as requested by Q gM the plant manager(s). OG mh+G provides information to the.Director of Environmental airs and the chairman of the cHRB on environmental matters for which requirements are included in the Environmental Technical Specifications and Environmental Protection Plans. .%'i'h TOPICAL QUALITY ASSURANt-"E REPORT Rev.TQR 1.0 13 ORGANIZATION Date July]4 1988 Page 23 Of 33 power plant design-related aspects of the FPL Quality Assurance Program throughout all phases of plant life except as specified for the Fuel Resources Department in Section 1.2.13.This responsibility extends from initial engineering evaluations of plant design-related site characteristics, through preliminary and detailed design, construction, operation and decommissioning. performs design-related activities and delegates design-related activitig to qualified contractors. For activities performed by~, the work is governed by FPL's Quality Assurance Program, and.ZPE is responsible for approval of the design output.Delegated activities are performed in accordance with an FPL approved Quality Assurance Program and the~contractor is responsible for approval of design output.'JPE is responsible for defining the scope of delegated activities and the responsibilities of the contractor. Prior to he release of design outputs by contractor organizations, ensures that the contractor is technically qualified to perform the design-related activity.~is responsible for development and maintenance of the or'v esign control program governing. rformed by and for providing Qu lity Assurance Department for~~~i'~p ementation and ef fectiveness of So design-related activities technical support to the assessing the adequacy, contractor design control Vl C 0 Z gl cv E 0 IL Ql'r}f\KNI t*l3 TOPICAL QUALITy ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 24 of 33 I 2-gs~is responsible for the preparation, revision, approval and distribution of plant design drawings that are identified to be maintained as"as constructed" drawings during plant operation. e,t.~~-hJ<dear G g<<acr i~The reports to the Vice President t4uclcav-G~r.as shown in Appendix A, Figure 1-1.1.2 Purchasing The Purchasing Department is responsible for the purchase of materials and services by FPL for its nuclear power plants with the exception of those materials and services secured by Corporate Contracts and Nuclear Fuels.Materials and services for nuclear safety-related application are secured only from approved suppliers, or as commercial grade, as applicable. The Department is responsible for assuring that technical and quality requirements developed by others are reviewed and approved by the designated quality departments, as applicable, are incorporated in the procurement document which the artment authorizes. It is responsible for maintaining ..pic tra eability of purchase records from acceptance of requ'sitions through payment of the purchase order invoices.~~~Pl~<'~~r: p"~CM~.The+nager ofgpurchasing reports to they Director of rement and Materials Management who reports to the Vice President of Corporate Services, Chief Financial Officer as shown in Appendix A, Figure 1-1. , I.~I'lk 4 1+'g II i TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 25 of 33 1.2.Construction ons ruc son The, Director of onst IC tion re orts directly to the Vice.S~.He is responsible for directing and administering effective management of the department to ensure compliance to the corporate policies, practices and procedures. Reporting to the Director of Construction Management are the Manager of Plant Construction and the Manager of Construction Quality Control, Welding and NDE.The Manager of Plant Construction is responsible for providing qualified construction support personnel to the Project Site Manager.Reporting administratively to the Manager of Plant Construction are the Construction Superintendents. The Construction Superintendent is responsible for conformance roject construction activities to the requirements of peci ications, codes, regulations and site procedures. He~superv ses the construction personnel assigned to the project, J~n(tes construction activities, including the scheduling ,o&,'mops ruction personnel requested bp the project site The Manager of Construction Quality Control, Welding and NDE is responsible for directing and administering the Construction A sgll'll 4 Cg C~J.h TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION July 14, 1988 Page 26 Df 33 1.2/g Construction (Cont'd)Quality Control and Welding Programs and for the technical direction and administrative control of all personnel within the Construction 'Quality Control and Welding organizations. This includes the development and implementation of policies, plans and procedures to meet the requirements of the Quality Assurance program, codes and standards. Reporting to the Manager of Construction Quality Control, Welding and NDE are the site Project Quality Control Supervisors, NDE Level III Supervisor, FPL Welding Superintendent and a staff of Quality Control Coordinators. Construction Quality Control is responsible for providing inspections as required, to assure that backfit activities meet the requirements of engineering drawings, specifications, codes and standards. This responsibility extends from receipt inspections of material on-site to acceptance of the installed items prior to turnover to the Nuclear Energy Department. It also"includes verification of conformance of an item or activity accomplished during this period to quality requirements (e.g., records review, NDE, inspections). .~~Q Ea nuclear power plant is assigned a Project Quality Control sup'e isor, who directs the on-site backfit Quaiity control~t t~',~n'zation. The Project Quality Control Supervisor reports 4njpi tratively and technically to the Manager of Construction ity Control, Welding and NDE, however, he also reports functionally to the Project Site Manager for the purpose of coordinating and scheduling inspection activities. The functional/administrative reporting roles provide the necessary 1 tl tP 4t)1%,t~ttt 0 TOPICAL QUALITy ASSURANCE REPORT TQR 1.0 Rev.'13 ORGANIZATION July 14, 1988 Page, 27 of 33 1.2A$Construction (Cont'd)independence of the si:te Construction Quality Control organization and also maximizes the communication between the Construction staff, the Quality Control staff and the Nuclear Energy staff.The Project Quality Control Supervisor is responsible for first line verification of the conformance of backfit activities to quality requirements, specifications, codes and local, State and Federal regulations. He directs on-site implementation of the Construction Quality Control Program which includes supervision, and daily coordination, and scheduling of inspection activities, and review of inspection results.The freedom and independence of the on-site Quality Control organization to assure the effectiveness of the Quality Control Program from pressures of cost and scheduling is derived from the Project Quality Control Supervisor's administrative and technical reporting relationship to the Manager of Construction Quality Control, Welding and NDE.Both the Manager of Construction Quality Control, Welding.and NDE, and the Project Quality Control Supervisor have the authority to stop work or operations adverse to quality if the need arises.-<<i QQQ e NDE Level III Supervisor is responsible for directing and.,~~8'-,,%.~< m itoring the NDE activities performed under the control of OG%Ppe Construction Management Department. He is responsible for)0+,<~g'Q~reparation, revision and implementation of NDE procedures, and the training, testing and qualification of the NDE personnel performing these activities. He is also responsible for providing the programs and direction for performance of NDE activities meeting the ASME, AWS and other NDE code requirements. P TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 19SS Page 28 of 33 1.2.9 Construction (Cont'd)The Quality Control Coordinators provide staff technical and administrative support to the Manager of Construction Quality Control, Welding and NDE in the preparation, review, issue and monitoring of the Construction Quality Control program to ensure effective implementation. The FPL Welding Superintendent reports to the Manager of Construction Quality Control, Welding and NDE.His responsibilities are to develop, maintain and control the FPL Welding Control Manual with assistance from Power Plant Engineering, to originate and qualify welding procedure specifications and operators to meet qualif ication of welders and.welding the applicable code requirements. He provides administrative and technical direction to the personnel within the FPL welding control program to meet engineering welding standards and code requirements. Reporting to the FPL Welding Superintendent are the Welding Supervisors at each Nuclear site.O ill C 0 z Ol IPI OI E 0 U.The organization structure of the Construction Management Department is illustrated in Appendix A, Figure 1-1.<<~-,-...,,V '1;<3~~ggphwer Supply@~in the Power Supply Department only equipment and services~a~:-~-.'~provided by the System Protection Group and Power Supply Technical Services are subject to the requirements of the Quality Assurance Program.Appendix A Figure 1-1 illustrates the reporting relationship. 0 g4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 29 of 33 1.2 Pf f.Power Supply (Cont'd)System Protection is responsible'or test, calibration and maintenance of certain high voltage electrical protective relays for safety-related systems of the nuclear plant.Activities of System Protection include final wiring connection checks, preoperational check-out and test of system protection devices and, providing inspection of equipment under their cognizance. Power Supply Technical Services is responsible for providing to System Protection certain setpoint and checkpoint values for protective devices'.2 Pi/0 Inventory Resources ID N D The Inventory Resources Department is responsible for the receipt, handling, storage, shipping and issue of items received at the plant site for control by Inventory Resources. This responsibility encompasses spare and replacement parts and components for plant equipment through all phases of plant l ife.1 J D ing operations, Inventory Resources also performs additional ity-related activities such as handling and segregation for nonconforming items received for stores control.The Manager of Power Plant Stores reports to the Manager of Inventory Resources who reports to the Director of Procurement and Material Management as shown in Appendix A, Figure 1-1.0 C 0 z Ol ws Ol E 0 IL !'4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1989 Page 30 of 33 1.2.~/I Company Nuclear, Review Board The Company Nuclear Review Board (CNRB)reviews or directs the performance of reviews of activities concerning the technical aspects of the operating nuclear power plant insofar as they impact on plant safety, the health and safety of the public, and laws, regulations and licensing commitments. In addition, audits of these areas are performed under the cognizance of the CNRB.Where necessary, the Board may use consulting services to perform required reviews.The management level to which the CNRB reports is illustrated in Appendix A, Figure 1-1.Its composition is delineated in Section 6.0 of each facility's Technical Specifications. The Senior Vice President 4 CAN~responsible for Power Delivery, Construction, Engineering, and Projects will perform his CNRB membership duties as Acting Group Vice President. Cl N D 0 C 0 z Ol cv E h 0 U.Subjects within the purview of the Board are listed in the appropriate plant Technical Specifications. The CNRB has the authority to carry out its responsibilities by way of written~~;action letters, verbal direction, minutes of meetings or pointed subcommittees. lg 1 Q$ear Fuel The Nuclear Fuel Section (FRN)of the Fuel Resources Department ~9~is responsible for the procurement, management, and accountability of FPL's nuclear fuel assets, and for providing technical support to fuel users within FPL.The Nuclear Fuel Section is under the direction of the Manager of, Nuclear Fuel who has the responsibilities described below: o Forecasting FPL's nuclear fuel requirements and the availability and price of nuclear fuel; a q C'~,'eT~gfa TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION July 14, 1988 31 of 33 1.2~/Wcclear Feel (Cent'd)o Preparing the procurement specifications for components of the nuclear fuel cycle;o Determining sources of supply and evaluating alternatives; o Making commercial arrangements, including contract negotiations with vendors for acquisition, processing and delivery of nuclear fuel and related services for the nuclear fuel cycle;o Assuring that technical and quality requirements including inputs from other FPL departments are incorporated in fuel contracts and letters of authorization and that these J documents have the necessary approvals; o Administering and managing contracts for nuclear fuel and related services to assure that contractual obligations are met, and serving as FPL liaison in all matters of nuclear fuel and fuel-related contracts; o Performing audits and coordinating accountability reporting on all nuclear fuel;o ,Providing support to the Quality Assurance Department for their auditing of nuclear fuel design and fuel assembly lO N Performing fuel management and safety analyses of nuclear procedures available for Fuel Resources'ine functions manu f ac turing;t cores to support plant.licensing;

,,~~>o g Development and/or review of fuel and nuclear physics o Performing the project management function with respect to nuclear fuel;o Provide and maintain benchmarked computer codes and 0 C 0 Z Ol N E 0 IL

TOPICAL QUALITy ASSURANCE REPORT Rev.TQR 1.0 13 ORGANIZATION Date July].4,]9SS Page 32 of 33 1.2~I~Nuclear Fuel (Cont'd)and other departments for daily use in maintaining records, performing safety analysis and core design, reporting of off-site nuclear fuel management activities and providing economic data;o Maintain effective and controlled computer access to Nuclear applications systems;o Develop and provide, to appropriate FPL groups, information necessary to determine FPL's fuel-related costs and to finance fuel-related expenditures; 0 0 0 Reviewing core-related changes to Safety Analysis Reports and Technical Specifications for compliance with design criteria and regulatory requirements; Participating in start-up physics tests and providing other technical support for operating nuclear power plants;Planning, maintenance and implementation 'f the Corporate Special Nuclear Materials program.The Manager of Nuclear Fuel reports to the Director of Fuels as shown in Appendix A, Figure 1-1...: 1.2.~orporate Records Services The Manager of Corporate Records Services is responsible for: ensuring the Quality Assurance records program activities are managed in accordance with applicable laws and regulations; assisting with the development and implementation of effective and compatible records and micrographics programs;developing, approving and maintaining record retention schedules; establishing parameters for indexing in the corporate records' TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.13 ORGANIZATION Date July 14, 1988 Page 33 of 33 1.2.14 Corporate Records Services (Cont')computerized Record Management System (RMS);locating acceptable record storage areas when requested; storage, retrieval and control of records/documents as reqested by other departments; leading the evaluation of specially designated"Quality Assurance approved" storage facilities and maintaining the records of this evaluation. The Corporate Records Services organization is shown in Appendix A, Figure 1-1.1.2.15 Documentary Files The Supervisor of Documentary Files is responsible for receiving, maintaining, retrieving and storing the.Quality Assurance records in connection with licenses and contracts received from other departments. The Documentary Files organization is shown in Appendix A, Figure 1-1.CO CC 2 I CV fl l I¹e$)v 0 TOPICAL QUAIZTY ASSURANCE REPORT TQR 1.0ORGANIZATION Rev.15 Date June 7, 19/9 Page 1 of 31 1.1 GENERAL UIREMENTS'The FPL.organizational structure shall be defined such that the responsibilities for establishment and implementation of the Quality Assurance Program are clearly identified. The authority and duties of individuals and organizations performing quality assurance and quality control functions shall be described, and shall illustrate the organizational independence and authority necessary to identify problems;to initiate, recommend, or provide solutions; and to verify implementation of solutions. In addition, the description shall illustrate that persons or groups responsible for verifying the correct performance of an activity are independent of the person or groups responsible for performing the activity.1.2 IMPLEMENTATION The President of Florida Power&Light is ultimately responsible for the execution of the Quality Assurance Program for Florida Power&Light Company (FPL)nuclear power plants.The authority for developing and verifying execution of the program is delegated to the Director of Quality Assurance, the Senior Vice President Nuclear and the Executive Vice President. The reporting relationship of each department involved with the Quality Assurance Program is shown in Appendix A, Figure 1-1.To provide for a review and evaluation of Quality Assurance Program policies and activities, the President has established the Quality Assurance Committee, chaired by the Executive Vice President. This organization's responsibilities are defined in Section 1.2.1.0 I/l C 0 z Ol CV E n e J K 4 ggi*VP TOPICAL QUALMY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Oate June 7 19g9 Page 2 of 31 1.2 IMPLMÃZATION: (Cont')gg:.,i In addition, a Quality Assurance Program Review Committee (QAPRC)(formerly the QA/QC Coordinators) has been established to review changes to the Quality Assurance Program and to provide an interface for quality matters in each department affecting quality.This organization's responsibilities are defined in Section 1.2.2.The head of each department or organization performing quality-related activities is responsible for: a)identifying those activities within the organization which are quality-related as defined by the Quality Assurance Program;b)establishing and clearly defining the duties and responsibilities of personnel within his organization who execute those quality-related activities; and c)planning, selecting, and training personnel to meet the requirements of the Quality Assurance Program.The responsibility, authority, and organizational relationship for performing quality-related activities within each organization shall be established and delineated in organizational charts and written job or functional descriptions. A Quality Assurance Program Review Committee (QAPRC)Member shall be designated by the head of each department or organization except for the Quality Assurance Committee, since this committee is a policy forming body (of which the Director of Quality Assurance is a member).The QAPRC Member is the prime interface for coordination of quality-related matters within the member's department, with the Quality Assurance Department, and with other departments. C 0 z Cb tL C4 E 0 The organization chart, Appendix A, Pigure 1-1, illustrates the lines of authority and areas of responsibility for each of the organizations that are involved in quality-related activities. The Project Management organization shown in this figure is applicable during design, procurement, construction, repairs and preoperational start-up and testing of power lh'4 TOPICAL QUALHY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7]9g9 Page 3 of 31 plant and modifications of power-plants (determined by management on a case-by-case basis)as described in Section 1.2.4.Below are listed the department:s and organizations that have Quality Assurance responsibilities. Specific organizational responsibilities for implementation of the Quality Assurance Program are described in the corresponding section numbers.1.2.1 Quality Assurance Committee 1.2.2 Quality Assurance Program 1.2.8 1.2.9 Construction Power Supply, Review Committee 1.2.10 Inventory Resources 1.2.3 Nuclear Energy Department -Nuclear Power Generation -Nuclear Corporate Staff 1.2.11 1.2.12 Company Nuclear Review Board Nuclear Puel 1.2.4 Project Management Department 1.2.5 Corporate Contracts Department 1.2.13 Corporate Records Services 1.2.14 Documentary Piles 1.2.6 1.2.7 Environmental. Affairs Purchasing 1.2.1 Quality Assurance Committee The Quality Assurance Committee, chaired by the Executive Vice President, is comprised of executive level members of management with responsibilities for the execution of the Quality Assurance Program within their responsibilities. This Committee's composition is delineated in its current charter and it'reporting relationship is shown in Appendix A, Pigure 1-1.0 lh C 0 z Ol CV 0 The Quality Assurance Committee is responsible for reviewing and evaluating Quality Assurance Program policies and activities. Policy changes shall be initiated'when Committee findings indicate the necessity. Quality Assurance Program status reports shall be periodically prepared by the Quality Assurance e 4$,rp TOPICAL QUALMY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 1989 Page 4 of 31 Department and routed.to the members of the Quality Assurance Committee for their review.In addition, Quality Assurance Committee meetings shall be held by the Executive Vice President to keep members apprised of conditions including signif icant problems that require management attention. The Quality Assurance Committee shall be the final authority for resolution of contested quality policies, differences of opinion, and stop-work or other corrective action requests when lower-level agreement cannot be reached between Quality Assurance or Quality Control and other departments. Periodic audits of the Quality Assurance Department shall b'performed by a team independent of the Quality Assurance Department, which is selected and approved by the Chairman of the Quality Assurance committee. The results of this audit are l presented to the Quality Assurance Committee. Quality Assurance Program Review Committee (QAPRC)The QAPRC (formerly the QA/QC Coordinators) was formed as an organization with the responsibility,to review and resolve recommended changes to the Quality Assurance Program.This committee is administered by the Quality Assurance Services group.Quality Assurance Program changes reviewed by the QAPRC are reviewed and signed by the department heads or individuals listed on each Quality Procedure. >4k~4 i j I r, J IL Jk J A J 4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rav.15 ORGANIZATION Date June 7, 1989 Page 5 of 31 1.2.3 Nuclear Energy Department Nuclear Energy responsibility for the plant begins with the Department's acceptance of a system or portion thereof from FPL Project Management. Throughout the remainder of plant life, Nuclear Energy maintains control of and responsibility for any plant modifications coordinated by Nuclear Energy and for the preoperational and start-up testing, operation, maintenance, refueling, and modification of the plant in accordance with written and approved procedures. The organizational structure of Nuclear Energy is shown in Appendix A, Figure 1-1.The Senior Vice President Nuclear has overall responsibility for Nuclear Energy's activities. The Senior Vice President Nuclear is designated as the Senior Corporate Nuclear Officer of Section 6.0, Administrative Controls, of each Unit's Technical Specifications. Reporting to the Senior Vice President Nuclear are: The Site Vice President-St.Lucie, the Site Vice President-Turkey Point, the Vice President Nuclear Energy, RMeeeMve Assistant, aa6 the Director of Quality Assurance and Director-Licensing. Additionally, reporting to the Senior Vice President is the Vice President responsible for overview of regulatory activities. 1.2.3.1 Nuclear Power Generation 0 C 0 z Ol~i Ol E ,0 The Site Vice President-St. Lucie and Site Vice President-Turkey Point are accountable for the operation, maintenance, and modification of their respective nuclear plant, as well as the selection, development and direction of the assigned staff.They will act as liaison between the plants and corporate headquarters, and are accountable for ensuring that company Q'l>n gt I l,lf:~ TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 oete June 7 1989 pege 6 pf 31 policies and procedures. are properly implemented and continued at the nuclear site.The Plant Manager (Plant Manager Nuclear at PTN)through the Vice Presidents -Turkey Point and St.Lucie Plants (as applicable) is responsible for the operation of the nucl'ear plant.The plant manager is additionally responsible for the establishment and implementation of plant Quality Control policy which implements the quality, control aspects of the Quality Assurance Program.Reporting directly to the Plant Manager is the plant Qualit'y Control Supervisor who has the authority and freedom to administer the plant Quality Control program and, when necessary, to stop activities adverse to quality.The Quality Control Supervisor, his staff, and personnel performing Quality Control inspection functions are required to be independent of groups or persons performing activities that they may be required to verify or inspect.Quality Control effort includes preparation and review of plant procedures, PCMs, quality-related instructions and procurement documents; Quality Control personnel are also responsible for inspection, monitoring, surveillance, and review of plant activities to verify compliance with the provisions of the facility operating license and the Quality Assurance Manual.The Quality Control Supervisor shall take corrective action for deficiencies identified, where applicable, and shall follow up on corrective action taken by other organizations until close out.He shall receive quality program direction from the Director of Quality Assurance. The Plant Nuclear Safety Committee (PNSC)at Turkey Point Plant or the Facility Review Group (FRG)at the St.Lucie Plant is comprised of key plant management and staff personnel as described in the plant Technical Specifications. The PNSC/FRG f'IW~ifV t4 t~$l h, y c 0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Da<e June 7 1989 Page 7 of 31 serves the plant manager in a technical advisory capacity for the review of all safety-related procedures and activities that impact on plant safety and the facility operating license.The Quality Assurance Department shall be responsible for administering the FPL Quality Assurance Program.This includes developing and verifying implementation of corporate policies, plans, requirements, and procedures affecting quality.This is accomplished through the Quality Assurance Department. The Quality Assurance Department retains responsibility for delegated portions of the Quality Assurance Program by performing initial evaluation and subsequent periodic audits of the contractors'uality Assurance Programs.The Quality Assurance Program responsibility further extends to the performance of audits within the Company to assure management that the established requirements and procedures are being implemented, and that the Program complies with the baseline document requirements. C 0 The organizational freedom of the Quality Assurance function is accomplished through the corporate structure, illustrated in Appendix A, which provides independence from those departments responsible for design, procurement, engineering, construction and operation. With Quality Assurance as the sole function of this organizationally independent department, the Director of Quality Assurance and his staff, both on-site and off-site, are completely free from the cost and scheduling pressures of design, procurement, construction and operation. The Quality Assurance Department has the freedom and authority to: a)identify quality problems;b)initiate, recommend or provide corrective action;c)verify implementation of the corrective action;and d)recommend the stoppage of work or operations adverse to quality, when necessary. Ol CV E 0 ~t/~a J'A,'a gr TOPICAL QUALHY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 7, 1989 Page 8 of 31 The Director of Quality Assurance reports to the Senior Vice V President Nuclear.He is responsible for the technical direction and the administrative control (e.g., performance appraisal, salary review, hire/fire, position assignment) of all members of the Quality Assurance Department. The Manager of Quality Assurance Services, the Superintendent of Quality Assurance-St.Lucie and the Superintendent of Quality Assurance-Turkey Point report administratively and functionally to the Director of Quality Assurance. The Superintendents of Quality Assurance receive technical direction from the Manager of Quality Assurance Services.The Director of Quality Assurance, the Senior Vice President Nuclear, and the Vice President Nuclear Energy are each members of the Quality Assurance Committee. This reporting relationship and memberships on the Quality Assurance Committee assure that the Quality Assurance Department has direct access to the levels of management necessary to assure effective implementation of the Quality Assurance Program.Further, the Operations Quality Control Supervisors of both Turkey Point and St.Lucie receive quality program direction from the Director of Quality Assurance. ID CO Ol 0 C a Z Ol CV C 0 The Manager of Quality Assurance Services directs and administers the Corporate Quality Assurance Program, including developing and verifying implementation of policies, plans, requirements, procedures and audits which assure compliance with the baseline documents listed in Appendix C of this Topical Quality Assurance Report.Additionally, the Manager of Quality Assurance Services is responsible for assuring the quality of safety'related items and services, and their vendors, through the Quality Assurance Procurement Group.' pl~r Q'0-II T A TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 1989 Page 9 of 31 The duties, responsibilities, and authorities of each Quality Assurance group are described in the sections which follow.a.Quality, Assurance~triecm Systems and Audits Group Oi 0 C 0 2 Cl C4 E 0 Quality Assurance Seamier Systems and Audits is responsible for the development and maintenance of the overall Quality Assurance Program, including the following: o Develop and maintain the Quality Assurance Department Quality Instructions, Quality Assurance Department Training 5.Organization Manual, and the corporate Quality Assurance Manual;including the administration of the Quality Assurance Program Review Committee (QAPRC)o Assist other departments in the development of Quality Instructions by review and comment and through interpretation of.corporate Quality Assurance requirements; o Develop and implement a Quality Assurance indoctri-nation program for FPL supervisory personnel, and a training program for the Quality Assurance Department; o Prepare reports on Quality Assurance Program activities for presentation to the Quality Assurance Committee by the Manager of Quality Assurance Services;o Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Department; o Review Regulatory Guides, Codes, SAR Document Commitments and Standards for impact on the Quality Assurance Program and recommend appropriate program n changes; V~J'> TOPICAL QUALHY ASSURANCE REPORT'QR 1.0 Rev.15 ORGANIZATION Date June 7,]9g9 Page 10 of 3].Review documents submitted to the Company Nuclear Review Board (CNRB)as requested by, the Quality Assurance Department CNRB member;Plan, coordinate and implement a comprehensive system of periodic internal audits with support from the other Quality Assurance groups, when necessary; Initiate, recommend or provide solutions and verify implementation of solutions for quality problems identified; Review FPL originated design specifications for inclusion of appropriate quality requirements. b.Quality Assurance Procurement Group Quality Assurance Procurement is responsible for assuring the quality of safety-related items and services, and their vendors, including the following: C4 0 C 0 2 Cl CV 6 I 0 0 Assist in the development and implementation of policies, plans, requirements and procedures for the requisition and purchase of materials, equipment and services related to nuclear power plants and to the acceptance and storage of equipment and material;Perform appropriate surveillance of hardware during manufacture; Develop and implement a program for auditing of supplier Quality Assurance/Quality Control programs including architect/engineer/ Nuclear Steam Supply System Suppliers; Review and approve FPL procurement documents and changes to these documents to assure that the necessary quality requirements are imposed; ~-n s'i4$V'ilw TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7,]9g9 Page 11 of 31 Assist other.FPL departments in the identification of quality problems associated with procurement and storage;initiate, recommend, or provide solution;and verify implementation of solutions; Review, approve and periodically audit the execution of FPL contractor quality assurance programs;Maintain a file system for documentation of quality assurance activities performed by the Quality Assurance Procurement group;Evaluate the Quality Assurance capability of suppliers requested by Purchasing and Corporate Contracts and maintain the Quality Assurance Department"Approved Suppliers'List".The responsibility of this group, in terms of phases of procurement, begins with the preparation of the procurement document, extends through bid evaluation, vendor selection, fabrication and shipment;and ends upon receipt of shipment at the operating plant or warehouse. This group, through audits and surveillances, assures that the contractors'rganizations perfo6ning Quality Assurance functions have sufficient authority and organizational freedom to implement effective Quality Assurance programs.c.Quality Assurance Group-Turkey Point 0 Y EJ 0 ill E 0 z Cl CV E ,0 The Superintendent of Quality Assurance-Turkey Point has responsibility for on-site development and implementation of the Quality Assurance Program, including the following: o Coordinate in the development and implementation of policies, plans, requirements, and procedures for portions of the quality assurance program related to ft>I g1 I 1 ,I4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 1989 Page 12 of 310 i 0 z Ol C4 E ,0 the operation.and modification of nuclear power plants at Turkey Point Units 3 and 4.(PTN);Perform audits, assessments and other observations at PTN to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage, health physics, chemistry, plant security and fire protection; Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PTN through audits of FPL and contractor organizations; Recommend stoppage of work or operations adverse to quality at PTN in accordance with the appropriate Quality Procedures Review and comment on Quality Instructions or equivalent quality-related administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PTN Final Safety Analysis Report, and the PTN Technical Specifications; Assure that the status is tracked for all PTN open items identified by the FPL Quality Assurance Turkey Point group, and inform appropriate management when there is an indication that a commitment will not be met on time;Maintain a file system for documentation of quality assurance activities performed by the Turkey Point group; 0 h y*I f~s 7~'P TOPICAL QUAIZTY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 7, 1989 Page 13 of 31 Assure design-related activities performed by=the Architect Engineer meet the quality aspects of the contract;Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);Review site generated FPL procurement documents and'hanges to procurement documents in accordance with the appropriate Quality Procedures; Perform audits of PTN architect engineer and Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with the Quality Assurance The interface with the Quality Assurance Procurement nuclear safety-related equipment at the plant site.The Quality Assurance program for the shipment is then within the purview of the Quality Assurance Turkey Point group.IO CO Ol Off-site interfaces for the resolution of quality-related problems and NRC items are with Project Management, Nuclear Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the Turkey Point operating plant.The Turkey Point group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-,related problems.d.Quality Assurance Group-St.Lucie (PSL)0 Vl C 0 Z CV E ,0 The Superintendent of Quality Assurance St.Lucie has responsibility for on-site development and implementation p:Cs ID 7 TOPICAL QUAIL ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 Date June 7,]9g9 Page 14 of 31 of the Quality Assurance Program, including the following: 0 Ih C 0 z C4 E.0 o Coordinate in the development and implementation of policies, plans, requirements and procedures for portions of the quality assurance program related to the operation or modification of St.Lucie Unit 1 Ec Unit 2 (PSL);o Perform audits, assessments and other observations at PSL to verify compliance with Quality Assurance Program commitments, identify quality problems and ensure timely corrective actions are taken in the areas of plant operation, system turnover, modification and maintenance; including such areas as refueling, inservice inspection and testing, procurement of spare/replacement parts, material storage, health physics, chemistry, plant security and fire protection; Identify requirements, ensure inclusion of commitments in documents and verify implementation of the Quality Assurance Program during the backfit activities at PSL through audits of PPL and contractor organizations; Maintain a file system for documentation of quality assurance activities performed by the St.Lucie Projects-Quality Assurance group;Assure design-related activities performed by the Architect Engineer meet the quality aspects of the contract;Review backfit procedures with respect to the FPL Quality Assurance Program (for procedure review requirements see TQR 5.0);Review site-generated PPL procurement documents and changes thereto, in accordance with appropriate Quality Procedures; 1+1 gl I" 4 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Oate June 7]9g9 Page 15 of 31 Perform audits of PSL architect engineer/Nuclear Steam Supply System suppliers both on-site and off-site, in conjunction with the Quality Assurance Procurement &group)Recommend stoppage of work or operations 'adverse to quality at PSL in accordance with the appropriate Quality Procedures; Review and comment on Quality Instructions or equivalent quality-related administrative procedures prior to issue, with respect to the requirements of the FPL Quality Assurance Program, the PSL Final Safety Analysis Reports and the plant Technical Specifications; k Assure that the status is tracked for all PSL open items identified by FPL St.Lucie Projects Quality Assurance group, and inform appropriate management when there is an indication that a commitment will not be met on time;The interface with the Quality Assurance Procurement safety-related equipment at the plant site.The Quality Assurance program for the shipment is then within the purview of the St.Lucie Projects Quality Assurance group.0 Vl C 0 z Ol~V CV Off-site interfaces for the resolution of quality-related problems and NRC items are with Project Management, Nuclear Engineering, Nuclear Corporate Staff and the architect engineer and Nuclear Steam Supply System Quality Assurance Department. This group is called upon to audit the St.Lucie operating plant.The St.Lucie Projects Quality Assurance group interfaces with the Site Vice President and his staff on-site by assisting in the resolution of quality-related probgeay.y~><WT Pr'~~~~6&~~CM~~~ -<<I lg l, TOPICAL QUAIZTY ASSURANCE'REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7]989 Page 16 of 31 1.2.3.2 Nuclear Corporate Staff The Vice President Nuclear Energy is responsible for the selection, staffing, training and development of personnel required for supervisory and operating continuity of staff groups ,supporting nuclear power generation. Reporting to the Vice President Nuclear Energy are the Director-Nuclear Engineering, Maintenance Manager Nuclear, Manager Nuclear Energy Services, Manager of Nuclear Training, Manager of Planning and Control.and The Nuclear Engineering Department (JPN)is responsible for power plant design-related aspects of the FPL Quality Assurance Program throughout all phases of plant life except as specified for the Fuel Resources Department in Section 1.2.13.This responsibility extends from initial engineering evaluations of plant design-related site characteristics, through preliminary and detailed design, construction, operation and decommissioning. 0 N C 0 2 I N 0 JPN performs design-related activities and delegates design-related activities to qualified contractors. For activities performed by JPN, the work is governed by FPL's Quality Assurance Program, and JPN is responsible for approval of the design output.Delegated activities are performed in accordance with an FPL approved Quality Assurance Program and the contractor is responsible for approval of design output.JPN is responsible for defining the scope of delegated activities and the responsibilities of the contractor. Prior to the release of design outputs by contractor organizations, JPN ensures that the contractor is technically qualified to perform the design-related activity. n yt, I p ,~A w}*s k f l TOPICAL QUALI',IY ASSIHUlNCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 19g9 Page 17 of 31 JPN is responsible for development and maintenance of the design control program governing design-related activities performed by JPN and for providing technical support to the Quality Assurance Department for assessing the adequacy, implementation and effectiveness of contractor design control programs.JPN is responsible for the preparation, revision, approval and distribution of plant design drawings that are identified to be maintained as"as constructed" drawings during plant operation. The Director-Nuclear Engineering reports to the Vice President-Nuclear Energy as shown in Appendix A, Figure 1-1..The Director-Nuclear Engineering directs the engineering aspects of all FPL nuclear power plant projects during construction and operation to.assure efficient, economical and reliable power plant design, conformance with engineering schedules and budgets and compliance with regulatory requiremmts. The Maintenance Manager Nuclear is responsible for directing activities in support of major plant maintenance projects, modifications and upgradings, as well as the development of work methods, specifications and systems to promote increased productivity. 0 I/l C 0 z Ol CV E 0 The Manager Nuclear Energy Services is accountable for technical staff support to the generating department and certain centralized special functions. This group consists of section supervisors and technical specialists, with functions including Health Physics, Chemistry, Radiological Waste, Emergency Planning, Plant Support, and Materials, Codes and Inspections. e lA TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 I ORGANIZATION Date June 7, 1989 Page 18 of 31 The Manager of Nuclear Training prepares policy documents regarding nuclear training and provides support to secure the necessary resources to ensure that Nuclear Energy personnel are adequately trained.They must have adequate, technical and job-related skills to provide safe and efficient operation while complying with NRC requirements. The Director of Nuclear Licensing is responsible for coordinating the NRC interface, distributing NRC documents requiring actions, evaluating potential impact and responding to all NRC action items.He is also responsible for assuring that the status is tracked for all open items identified by the NRC or other federal, local and state agencies and for informing appropriate management when there is an indication that a commitment will not be met on time.The Manager of Planning and Control-Nuclear directs or coordinates 'he planning, administration and control of information management, budgeting and cost control, nuclear security, personnel, and rate regulatory activities for the Nuclear Energy Department. The Manager of Nuclear Security reports to the Manager of Planning and Control and is responsible for coordinating the overall development and implementation of nuclear security policy for the Nuclear Energy Department. ID N 0 I/I C 0 Z Ch CV C\0 1I 1.2.4 Project Management Department The Project Management Department, through the Project General Manager, exercises management control'of assigned projects. C,i k my r TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 1989 Page 19 of 31 This management control.begins when a Project is assigned to the Project Management Department and continues until the facility is accepted for operation or the project is complete.This management control includes the responsibility for coordination of specifications and requisitions, repair, construction and may include preoperational start-up and testing of power plant modifications. The Project Management Department organization is shown in Appendix A, Figure 1-1.The Director of Projects, reporting to the~eerie+Vice President-Plant Support, has overall responsibility for the activities of the Project Management Department. 'Project General Manager, reporting to the Director of Projects, is responsible for completing the assigned project in compliance with technical and other project specifications, and for the'pplication of the provisions of the Quality Assurance Manual during the projec2.The Project General Manager is responsible for obtaining corrective action from any contractor's management hen when corrective action cannot be obtained at the project site management level and, when necessary, can exercise his authority to stop work on project activities adverse to quality.0 Vl C 0 z Ch CV The overall responsibility for Plant Changes and Modifications to operating plants is defined in each plant's Technical Specifications. However, frequently the work of installation and administration of Plant Changes and Modifications is assigned to FPL Project Management Department. The Project Site Manager will report to the appropriate nuclear site Vice President but will also receive guidance and advice'from the Project General Manager.The Project Site Manager is additionally responsible for the functional di'rection of construction Quality Control for I El l j gl 4'4\h t t t' TOPICAL QUALIIY ASSURANCE REPORT TQR 1.0ORGANIZATION Rev.15 Date June 7, 1989 page 20 of 31 the purpose of coordinating inspection activities which implement the quality control aspects of the quality assurance program for modifications of projects assigned to project Hmanagement. Activities affecting quality may be performed by FPL or contracted. Should any of these functions be contracted, the contractor may perform the activities under his own Quality Assurance Program, which must have prior approval by FPL Quality Assurance, or the contractor may directly adopt the requirements of the FPL Quality Assurance Manual.If the contractor implements the Quality Control function directly to the FPL Quality Assurance Manual requirements, the contractor's Quality Control Supervisor shall have the authority and freedom to administer the Quality Control program.o'roject Team Members are appointed by-their home department heads as the departmental representative on the respective project, when requested by the Project General Manager.Team Members, other than Quality Assurance and Stores Department, report functionally to the Project General Manager, or the Project Site Manager, but continue to receive administrative support and technical direction from their home department. Team members are responsible to the Project General Manager for home department support to the project.1.2.5 Corporate Contracts Department 0 C 0 Z Ol N F ,0 E The Corporate Contracts Department is responsible for generation, negotiation and issuance of contracts over specified time periods and dollar limits for turbine generators, steam generators, nuclear steam supply systems (NSSS), new items, repairs, constructors, construction managers, and Architect Engineer (A/E)and consulting services.Corporate Contracts is also responsible for assuring that technical and quality requirements developed ~(n v t 0 I35 lt TOPICAL QUAGGY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Da<e June 7, 1989 Page 21 of 31 by others are incorporated in such contracts, as appropriate, and that these contracts have the required approvals. Details of the activities of the department in fulfilling this responsibility shall be delineated in the appropriate Quality Procedures. The Manager of Corporate Contracts reports to the Director of Procurement 6 Material Management. The Corporate Contracts Organization is shown in Appendix A, Figure 1-1.1.2.6 Environmental Affairs Environmental Affairs is responsible for obtaining the federal and state environmental permits required for FPL facilities and operations. Environmental Affairs is responsible for overall coordination of non-radiological environmental monitoring (federal and state)programs at the nuclear power plant sites.The Manager of Environmental Technical Services, the Manager of Environmental Resources and Planning and the Manager of Environmental Permitting and Programs report to the Director of Environmental Affairs as illustrated in Appendix A, Figure 1-1..The Director of Environmental Affairs has overall responsibility for implementation of the cab Environmental Protection Plans at nuclear power plant sites.C 0 2 Ch N 0 The Environmental Affairs Department through its management of the Company Environmental Review Group (CERG)is responsible for overall coordination of environmental monitoring programs and requirements related to the Environmental Protection Plans.The CERG provides review of proposed changes to the Environmental Protection Plans, review of any violations of monitoring and/or limitation P I I TOPICAL QUALHY ASSURANCE REPORT TQR 1.0 ORGANIZATION Rev.15 June 7, 1989 Page 22 of'1 requirements of federal and state permits and Environmmtal Protection Plans and review of plant activities as described in those Enviroxmeatal Affairs Department Environmental Procedures subject to QA requirements. The CERG provides information to the Director of Environmental Affairs and the Chairman of the CNRB on environmental matters for which requirements are included in Environmental Protection Plans.1.2.7 Purchasing The Purchasing Department is responsible for the.purchase of materials and services by FPL for its nuclear power plants with the exception of those materials and services secured by Corporate Contracts and Nuclear Fuels.Materials and services for nuclear safety-related application are secured only from approved suppliers, or as commercial grade, as applicable. ID CO I The Department is responsible for assuring that technical and quality requirements developed by others are reviewed'and approved by the designated quality departments, as applicable, are incorporated in the procurement document which the department authorizes. It is responsible for maintaining traceability of purchase records from acceptance of requisitions through payment of the purchase order invoices.C 0 2 Oi~V CV The Manager of Power Plant Purchasing reports to the Director of Procurement ~R Materials Management who reports to the Vice President of ~5, l F, TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 1989 Page 23 of 31 I Corporate Services, Chief Financial Officer as shown in Appendix A, Figure 1-1.1.2.8 Construction The Juno Construction Management Department (JCM)is responsible for providing direction and coordination regarding construction, supervision and management, equipment utilization, quality control, welding, NDE and other construction support activities. The Director of Construction reports directly to the Mme~Vice President-Plant Support.He is responsible for directing and administering effective management of the department to ensure compliance to the corporate policies, practices and procedures. Reporting to the Director of Construction Management are the Manager of Plant Construction and the Manager of Construction Quality Control, Welding and NDE.The Manager of Plant Construction is responsible for providing qualified construction support personnel to the'Project Site Manager.Reporting administratively to the Manager of Plant Construction are the Construction Supervisors. .Lead0 Vl C 0 z Ch Ol E responsible for conformance of project construction activities to the requirements of specifications, codes, regulations and site procedures. He supervises the construction personnel assigned to the project, coordinates construction activities, including the scheduling of construction personnel requested by the Project Site Manager.The Manager of Construction Quality Control, Welding and NDE is lv k f f c~<Y WlAI~( TOPICAL QUAIZTY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7 1989 Page 24 of 31 responsible for directing and administering the Construction Quality Control and Welding Programs and for the technical direction and administrative control of all personnel within the Construction Quality Control and Welding organizations. This includes the development and implementation of policies, plans and procedures to meet the requirements of the Quality Assurance program, codes and standards. Reporting to the Manager of Construction Quality Control, Welding and NDE are the site Project Quality Control Supervisors, NDE Level III Supervisor, PPL Welding Superintendent and a staff of Quality Control Coordinators. Construction Quality Control i's responsible for providing inspections as required, to assure that backfit activities meet the requirements of engineering drawings, specifications, codes and standards. This responsibility extends from receipt inspections of material on-site to acceptance of the installed items prior to turnover to the Nuclear Energy Department. It also includes verification of conformance of an item or activity accomplished during this per'iod to quality requirements (e.g., records review, NDE, inspections). 0 C 0 z Cl CV E Each nuclear power plant is assigned a Project Quality Control Supervisor, who directs the on-site backfit Quality Control organization. The Project Quality Control Supervisor reports administratively and technically to the Manager of Construction Quality Control, Welding and NDE, however, he also reports functionally to the Project Site Manager for the purpose of coordinating and scheduling inspection activities. The functional/administrative reporting ro'les provide the necessary independence of the site Construction Quality Control organization and also maximizes the communication between the hhh TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZaTION 'ate June 7, 1989 pa<<25 of 31 Construction staff, the Quality Control staff and the Nuclear Energy staff.0 The Project Quality Control Supervisor is responsible for first line verification of the conformance of backfit activities to quality requirements, specifications, codes and local, State and Federal regulations. He directs on-site implementation of the Construction Quality Control Program which includes supervision, and daily coordination, and scheduling of inspection activities, and review of inspection results.The freedom and independence of the on-site Quality Control organization to assure the effectiveness of the Quality Control Program from pressures of cost and scheduling is derived from the Project Quality Control Supervisor's administrative and technical reporting relationship to the Manager of Ccastruction Quality Control, Welding and NDE.Both the Manager of Construction Quality Control, Welding and NDE, and the Project Quality Control Supervisor have the authority to stop work or operations adverse to quality if the need arises.The NDE Level III Supervisor is responsible for directing and monitoring the NDE activities performed under the control of the Construction Management Department. He is responsible for preparation, revision and implementation of NDE procedures, and the training, testing and qualification of the NDE personnel performing these activities. He is also responsible for providing the programs and direction for performance of NDE activities meeting the ASME, AWS and other NDE code requirements. Ih C 0 2 Ol C.0 The Quality Control Coordinators provide staff technical and administrative, support to the Manager of Construction Quality Control, Welding and NDE in the preparation, review, issue and ,5 4'I n 4' TOPICAL QUALZIY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7 I9g9 Page 26 of 31 monitoring of the Construction Quality Control program to ensure effective implementation. cR" The FPL Welding Superintendent reports to the Manager of Construction Quality Control, Welding and NDE.His responsibilities are to develop, maintain and control the FPL Welding Control Manual with assistance from Nuclear Engineering, to originate and qualify welding procedure specifications and qualification of welders and welding operators to meet the applicable code requirements. He provides administrative and technical direction to the personnel within the FPL welding control program to meet engineering welding standards and code requirements. Reporting to the FPL Welding Superintendent are the Welding Supervisors at each Nuclear site.The organization structure of the Construction Management Department is illustrated in Appendix A, Figure 1-1.1.2.9 Power Supply Within the Power Supply Department only equipment and services provided by the System Protection Group and Power Supply Technical Services Group are subject to the requirements of the Quality Assurance Program.Appendix A Figure 1-1 illustrates the reporting relationship. C 0 z Ol r Ol E.0 System Protection is responsible for test, calibration and maintenance of certain high voltage electrical protective relays for safety-related systems of the nuclear plant.Activities of, System Protection include final wiring connection checks, preoperational check-out and test of system protection devices and providing inspection of equipment under their cognizance. Power Supply Technical Services is responsible for providing~ ~'I'tta g P A] TOPICAL (}UAIZTY ASSURANCE REPORT TQR 1'Rev.15 e ORGANIZATION 0 te June 7 19/9 Page 27 of 31 certain setpoint and checkpoint values for protective devices.1.2.10 Inventory Resources The Inventory Resources Department is responsible for the receipt, handling, storage, shipping and issue of items received at the plant site for control by Inventory Resources. This responsibility encompasses spare and replacement parts and components for plant equipment through all phases of plant life.During operations, Inventory Resources also performs additional quality-related activities such as handling and segregation for'nonconforming items received for stores control.The Manager of Power Plant Stores reports to the Manager of Inventory Resources who reports to the Director'of Procurement end 6 Material Management as shown in Appendix A, Figure 1-1.1.2.11 Company Nuclear Review Board IA C 0 z Ol r CV.0 The Company Nuclear Review Board (CNRB)reviews or directs the performance of reviews of activities concerning the technical aspects of the operating nuclear power plant insofar as they impact on plant safety, the health and safety of the public, and laws, regulations and licensing commitments. In addition, audits of these areas are performed under the cognizance of the CNRB.Where necessary, the Board may use consulting services to perform required reviews.The management level to which the CNRB reports is illustrated in Appendix A, Figure 1-1.Its composition is delineated in Section 6.0 of each facility's Technical Specifications. The Senior Vice President responsible for Power t.P II 011 0 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7 19g9 Page 28 of 31 Delivery, Construction, Heekeae Power Plant Engineering, and Projects will perform his CNRB membership duties as Acting Group Vice President. Subjects within the purview of the Board are listed in the appropriate plant Technical Specifications. The CNRB has the authority to carry out its responsibilities by way of written action letters, verbal direction, minutes of meetings or appointed subcommittees. 1.2.12 Nuclear Fuel The Nuclear Fuel Section (FRN)of the Fuel Resources Department is responsible for the procurement, management, and accountability of FPL's nuclear fuel assets, and for providing technical support to fuel users within FPL.The Nuclear Fuel Section is under the direction of the Manager of Nuclear Fuel who has the responsibilities described below: N C 0 2 Ol CV C 0 o Forecasting FPL's nuclear fuel requirements and the availability and price of nuclear fuel;o Preparing the procurement specifications for components of the nuclear fuel cycle;o Determining sources of supply and evaluating alternatives; o Making commercial arrangements, including contract negotiations with vendors for acquisition, processing and delivery of nuclear fuel and related services for the nuclear fuel cycle;o Assuring that technical and quality requirements including inputs from other FPL dep'artments are incorporated in fuel contracts and letters of authorization and that these documents have the necessary approvals; t)'r 4 l]L c0 (~t I TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7,]9g9 bhaga 29,<<31 o Administering and managing contracts for nuclear fuel and related services to assure that contractual obligations are met, and serving as FPL liaison in all matters of nuclear fuel and fuel-related contracts; QV o Providing support to the Quality Assurance Department for their auditing of nuclear fuel design and fuel assembly manufacturing; o Performing fuel management and safety analyses of nuclear cores to support plant licensing; Development and/or review of fuel and nuclear physics design;Performing the project management function with respect to nuclear fuel;0 C 0 Z Ol CV C 0 Reviewing core-related changes to Safety Analysis Reports and Technical Specifications for compliance with design criteria and regulatory requirements; Participating in start-up physics tests and providing other technical support for operating nuclear power plants;Planning, maintenance and implementation of the Corporate Special Nuclear Materials program. '(s4-P~4'v Ki'd TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7,]989 Page 30 of 31 The Manager of Nuclear Fuel reports to the Director of Pueke Fuel Resources as shown in Appendix A, Figure 1-1.The Fuel Services Section of the Fuel Resources Department is responsible for the accountability reporting of FPL's nuclear fuel assets to other FPL groups, and for providing support in computer code maintenance to the Nuclear Fuel Section (FRN).The Fuel Services Section is under the direction of the Manager of Fuel Services who has the responsibilities described below: o Provide and maintain computer codes and procedures available for Fuel Resources'ine functions and other departments for daily use in maintaining records, performing safety analysis and core design, reporting of off-site nuclear fuel management activities and providing economic data;o Maintain effective and controlled computer access to nuclear applications; o Performing audits and coordinating accountability reporting on all nuclear fuel;o Develop and provide, to appropriate FPL groups, information necessary to determine FPL's fuel-related costs and to finance fuel-related expenditures. The Manager of Fuel Services reports to the Director of Fuel Resources. 1.2.13 Corporate Records Services 0 C 0 2 Ol C4 E 0 The Manager of Corporate Records Services is responsible for: ensuring the Quality Assurance records program activities are managed in accordance with applicable laws and regulations; assisting with the development and implementation of effective I I v'V<'v f 1'g~f 4'g1 TOPICAL QUALITY ASSURANCE REPORT TQR 1.0 Rev.15 ORGANIZATION Date June 7, 1989 Page 31 of 31 and compatible records and micrographics programs;developing, approving and maintaining record retention schedules; establishing parameters for indexing in the corporate records'omputerized Record Management System (RMS);locating acceptable record storage areas when requested; storage, retrieval and control of records/documents as requested by other departments; leading the evaluation of specially designated"Quality Assurance approved" storage facilities and maintaining the records of this evaluation. The Corporate Records Services organization is shown in Appendix A, Pigure 1-1.1.2.14 Documentary Piles Oi The Supervisor of Documentary Piles is responsible for receiving, maintaining, retrieving and storing the Quality Assurance records in connection with licenses and contracts received from other departments. The Documentary Piles organization is shown in Appendix A, Figure 1-1. A~t 4 TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASSURANCE PRO%%M Rev.Date June 10, 1987 Page 1 Of 8 2.1 GENERAL RE UK%MENTS Florida Power 6 Light Compa 2l.'!."~'.i.i<l c i'lT i s-~'S U*Q'C',')fief'JT 4~ds&aBkikh9Pdk u lity Assurance Program which complies with the criteria of 10 CFR 50 Appendix B, and meets the requirements of Regulatory Guides and Industry Standards referenced in Appendix C of this report.The Topical Quality Requirements and attached Policy Statement, together with'he Quality Procedures and Quality Instructions document the'Program and the FPL policy with regard to Quality Assurance. This Program shall be instituted for each plant site in a schedule consistent with accomplishing the required activity and shall be carried out throughout the life of FPL nuclear plants.The requirements of the FPL Quality Assurance Program shall only apply to nuclear safety~related structures, systems, and components as identified in the Safety Analysis Report for each nuclear unit.Additionally, the requirements of the FPL Quality Assurance Program shall apply to all FPL, contractor,'or consultant organizations performing activities'ffecting the quality of safety~related structures, systems, and components of FPL nuclear power plants.Documented procedures shall require and define indoctrination and training of personnel performing activities affecting quality as necessary to assure that suitable proficiency is achieved and maintained. Periodic program reviews of the status and adequacy of the FPL Quality Assurance Program shall be accomplisheg by the independent 4M04W g$'8'vv dna~audit team described in Section 1.2.1 and by~Department audits.A t$ TOPICAL QUALITY ASSURANCE REPORT TQR 2'2.1 QUALITY ASSURANCE PROGR3LM!~Q+pq 3>LUAU(l General Requirements (Cont'"-:<'."~L l'>3)N/8 Q hfc'L~$Management of organizatio sgg@9d7e Q'@gith3,~g e participating in the Progra~m5KT1-be Rev.Date'une 10, 1987 Page 2 of 8 6 Light Company regularly review the status and adequacy of that part of the FPL Quality Assurance Program which they are executing. The FPL Q3tality Assurance Ma t t~~so~r~~au Department shall review and concur in the~Program of contractors.

2.2 IMPL39KNTATION

2.2.1 Goals and Objectives As stated in the Policy Statement of the President of Florida Power 6 Light Company, the goal of the FPL Quality Assurance Program is to maintain quality levels in an effective and efficient manner, and to assure the high degree of functional integrity and reliability of nuclear safetymelated structures, systems, and components. To meet this goal, the following objectives of the FPL Quality Assurance Program have been defined: a~b.C.Define through documented procedures and instructions the quality activities that apply to the design, fabrication, procurement, modification, testing, operation, refueling, maintenance, and repair of nuclear power plants;Establish, assign, and document the responsibilities for those activities affecting quality of safety related structures, systems, and components; Establish confidence that the design, fabrication, modification, and operation of nuclear power generation facilities are performed in a manner consistent with FPL policies by assuring quality related activities are performed by responsible personnel; b" t<"I,f S'k V 4 tl, TOPICAL QUALITY ASSURANCE REPORT TQR 2eo QUALITY ASSURANCE PROGRAM R ev.Date June 10 19S7 Pi t'.CORD Page 3<<8 d.Apprise management )~'~~el)eQ s,t rr fg ugroedSB'ep Qep leps tieÃ4 could have a significant e e and 2.2s1 Goals and Objectives (Cont'nd trends which er plant safety e.Prevent schedule delays and high cost due to poor quality.2.2.2 Program Documentation The Topical Quality Assurance Report, which'"defines the policy, goals, and objectives regarding the Quality Assurance Program, shall be contained in the FPL Quality Assurance Manual, and used as guidance for the development of corporate level Quality Procedures which are also contained in the Quality Assurance Manual.Revisions to the Topical Quality Assurance Report will be made, as needed, to reflect current FPL program requirements and descriptions of activities. These revisions shall be made in accordance with a Quality Procedure. If a program revision reflects a reduction of the commitments from the baseline documents contained in Appendix C, the revision shall be submitted to and approved by the NRt priqr o mva.(f implementation. In all other cases, amendments to the Topical$5QliMd@eport will be submitted to the Hpc to reflect implemented program revisions on an annual or more frequent basis.lO er CV Quality Procedures shall be written by the department with major responsibilities for an activity, or by the Quality Assurance Department when requested. These procedures shall be reviewed by all the departments with responsibility for some portion of that procedure, and shall be approved by the major implementing departments with co-approval by the Director of Quality Assurance. A listing of corporate level Quality Procedures is contained in Appendix E.V)t: 0 Z i7I N 0 U. 'x$.4 TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASS Rev.ate June 10, 1997 age 4 of 8 2.2.2 Program Description Each Quality Procedure shall be wrXKt~o4 ress criteria coztained in the Topical Quality Requirements and to further define Cl&2 (i 5aJ/~~the FPL o iczes, plans, and program where action is required by more than one department. Each department head shall have the responsibility for implementation of the Quality Assurance Program, which includes compliance with procedure requirements applicable .to his department. ln addition, he shall be responsible foz the preparation, approval, and distribution of Quality Instructions, operating procedures, testing procedures, or other inst~ctions, wva.c g'~where further guidance is necessary for implementation of the~/gygp~gRProgram requirements within his department. Quality Instructions shall be reviewed by the Quality Assuzance Depaztment at each revision." 2.2.3 Structures, Systems, and Components The requirements of the FPL Quality Assurance Program shall apply to nuclear safety related.structures, systems, and components, as defined in the SAR.Safety-related structures, systems, and components are listed as those necessary to assure the integrity of the reactor coolant boundary, the capability to shutdown the reactor and maintain it in a safe shutdown condition, or the capability to prevent or mitigate the consequences of accidents which could result in off-site exposures comparable to the guideline exposures of 10 CFR 100. qO,W Vg gl~(II C gI'I+T ig Ai TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASSURANCE Rev.Date June 10, 1987 age 5 of 8 2.2.3 structures, systems and components (CdnB@.'..., I lacy Control over activities affecting the~gjgg f ty~elated structures, systems, and components shall be the extent consistent with their importance to safety.Such control shall include use of appropriate equipment, establishment of suitable environmental conditions, and assurance that all prerequisites for a given activity have been satisfied. The Program shall provide for controls over special processes and skills necessary to attain the required quality, and the need for verification of quality by inspection and test.Advance planning is required, for the control of management and technical interfaces between FPL and contractors, during the phase-out of design and construction and during preoperational testing and plant turnover.This is achieved through periodic meetings of concerned organizations and the development of procedures which define responsibilities and interfaces, and control the testing and turnover of plant systems to FPL.2.2.4 Participating Organizations The FPL organizations with responsibilit:ies for activities affecting quality of nuclear safety related structures, systems, and components are identified in TQR 1.0, which also briefly describes their assigned responsibilities. Florida Power 6 Light Company may delegate activities to contractor organizations and equipment vendors.Delegated acti jt'es are V~spur subject to the external organization's FPL approved ro or the FPL QA Program, or some FPL approved combination thereof. ,1~A 2 gN t C (irb TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASSURANCE PROGRAM O!'l pr qo Rev.Date June 10, 1987 Page 6 Of 8 2.2.4'Participating Organizatio sf';(fop'+sif~fsjT i~ees ss Q st'P i l~j However, FPL shall re'.'>Qkgi4g~l@oh (: ities for the~p 5QJyp~rogram. Procuremqpt d cuments shall define the scope cFvs t~~4~I'~~activities, as well as Program requirements that these activities. of delegated shall govern 4ufh(c The Quality Assurance Department shall review and approve the~gqggf&~Program governing contracted activities prior to award of contract except for activities for which the output is of a conceptual and/or prototype nature.In all cases, final approval shall occur at a point in the process to ensure that the output complies with the mum.t i~~s~~a requirements of the FPL approved~prŽogram. The object of this review shall be to verify that the program is in compliance with the applicable requirements of Appendix B, lOCFR50, and ANSI N45.2.Audits shall be conducted periodically to verify the acceptable ~vM i W~S<r~implementation of the contractor's FPL approved~Program governing delegated activities. The Quality Assurance Department is responsible for conducting these audits.The initial review and periodic audits shall be performed by qualified Quality Assurance Department personnel, and as appropriate, by technical specialists from other FPL departments and contractor organizations.

2.2.5 Indoctrination

and Training ID N V)C 0 Z r N E s 0 U.A program shall be established and maintained for quality assurance indoctrination, and for training which assures that the required level of personnel competence and skill is achieved and maintained in the performance of quality~related activities. Quality Procedures shall delineate the requirements for an indoctrination program to assure that personnel responsible for performing quality activities are instructed in the purpose, scope, and implementation of the quality~elated manuals, instructions, and procedures and that compliance to these documents is a mandatory requirement. 'll l, f j""4 ((i'J ()g If TOPICAL QUALITY ASSURANCE REPORT TQR 2.0 QUALITY ASSURANCE PROGRtLM Rev.Oate June lP, lgS7 Page 7 of 8 2.2.5 Indoctrination and Training (Cont'd)Quality Procedur s shall also require the head of each department A.ssur~m (including the QA Department) to be responsible for a training plan which assures that personnel performing quality related activities are trained in the principles and techniques of the activity being performed. This training shall maintain the proficiency of personnel in the skills necessary for the quality related activities through retraining, requalification or reexamination, as appropriate. When personnel are assigned to perform their functions under the direction of personnel from other than their home department, the department head of the organization providing direction is responsible for the indoctrinaton and training of personnel who perform quality related activities under his direction. Quality Procedures shall specify the requirements for documenting indoctrination and training sessions, including a course description, attendance, location, and date.2.2e6 Management Participation In addition to the involvement of department heads in implementing Qual t'R As>Mr the~PrOgram wxt in their departments and~e involvement of the t<~A~g~r~~Director of Quality Assurance and the Manager of~Services in the development, coordination, and review of the Program, the Quality Assurance Committee shall be apprised of the status and adequacy of the Quality Assurance Program on a periodic basis.The following C gt, I'l TOPICAL QUALITY ASSURANCE REPORT TQR 2eo QUALITY ASSURANCE PROGRAM Rev.Date June 10, I.gS7 Page S of 9 2.2e6 Management Participation (Cont'd)actions shall be instituted to assure that the Quality Assurance'ommittee remains informed and meets its Program responsibilities: a.The Committee shell review a summary of the results of Sub ((Q S V t e df).~management level~au its of Fpl Departments. b.The Quality Assurance Department shall circulate monthl CRu~]<reports of quality~related activities to members of the~$%$'~~~Committee and af f ected department heads.The monthly reports may include such items as the status of audits, a summary of audit findings, the status of development projects, and descriptions of policy matters or problems requiring management attention. c.Tge Quality Assurance Committee shall review the status of the Qu8lc~AMvf&e~~~Program on a semiannual basis.The review will'nclude assessment of the Program goals, objectives, and accomplishments. Chad~ssv r~~d.Periodic audits of the~Department and Program shall be'onducted by an independent audit group under the direction of the Chairman of the Quality Assurance Committee. This audit group shall employ FPL audit procedures and shall distribute Wa(<A the audit report toŽthe fI Departmen, and to the QualitY Assurance Committee for review of findings and corrective action.Auditor certifications of independent audit teams will be retained by the Quality Assurance Department. The programs of contractor organizations that perform quality related activities shall be reviewed by Quality Assurance to assure that their management regularly adequacy of that part of the FPL Qu which they are executing. eve g t P nd lit su&ice Program PER)V)A))F)'~T--u~)O~U)g)F)HT i Je~Clio-:.$SEBE9 t Jl k r TOPICAL QUALITY ASSURANCE REPORT R ev.FLORIDA POWER&LIGHT COMPANY DESIGN CONTROL Date 3une l0 l986 3.1 Page of l 6 ORO'p~)I""'"s'p GENERAL RE UIREMENTS pi.~'Ocf,"'<i It g~,.:I...", A Quality Assurance Program shall be esta'for design-related activities. This design control program shall ensure that the design is defined, controlled and verified;that applicable design inputs are specified and correctly translated into design output documents; that design interfaces are I identified and controlled; that design adequacy is verified by persons other than those who designed the item;and that design changes, including field changes, are governed by control measures commensurate with those applied to the original design.Design records shall be developed to provide evidence that the design process and design verification were performed in accordance with the requirements of FPL's Quality Assurance Program.The design organization (the Power Plant Engineering Department, the Fuel Resources Department or designated contractor organization) shall be responsible for the content of these records.Design records shall include design output documents and the important steps in the design effort.The intent of this documentation is to allow a technically qualified person to understand how the design was developed, and to allow that person to verify the design based on the design documentation and engineering data sources referenced therein.3.2 IMPLEMENTATION The design organization's Quality Assurance Program for design control shall be approved by the FPL Quality Assurance Department prior to the release of approved design output by the design organization. The design organization is the organization responsible for approval of design output.(0 C 0 Z Ol Ol e O U rgb$f, I'I l'C g I A TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 FLORIDA POWER aL LIGHT COMPANY Rev.5 Date 3une l0, l 986 Page 2 of 3.2~r Implementation (Cont~'4.g Quality Procedures and Quality Instructio ll be developed to delineate design control requirements governing designwelated activities performed by the Power Plant Engineering Department and the Fuel Resources Department and for their delegating activities to contractor organizations. 3.2.1 Design Process The design organization shall specify an'd document its design activities to the level of detail necessary to permit the design to be developed in a correct manner and to permit verification that design output documents satisfy design input requirements. Design.methods, materials, parts, equipment and processes, including those associated with commercial grade items that are essential to the function of the structure, system or component shall.be selected, reviewed and approved for suitability of application by the design organization. Design inputs shall be identified, documented, reviewed and approved by the design organization. They shall be specified to the level of detail necessary to permit the design activity to be carried out in a correct manner, and to provide a consistent basis for making design-related decisions, performing I design verification and evaluating design changes.Changes to approved design inputs, including the reason for the changes, shall be approved, documented and controlled by the design organization. The design organization shall identify aspects of manufacture, construction, inspection and testing critical to achieving the function of the structure, system or component. Quality standards and quality requirements shall be specified on design output or procurement documents. Changes from rs I l'V' TOPICAL QUALITY ASSURANCE REPORT Rev.T R 3.0 DESIG CO OL g p p Date 3une 10, 1986 Page Gf 3.2.1'ri~e'vr Design Process (Cont'd)tlst tvg s.ye st approved qualitye elated requirements speci iIt gs'output, including the reason for the changes, shall be approved, documen ed and controlled by the design organization. Design analyses shall be controlled and documented. Approved design output documents and approved changes thereto shall be relatable to the design input by documentation in sufficient detail to permit verification. The design organization shall establish procedures to review industry design experience. As appropriate, this experience shall be made available to cognizant design personnel. 3.2.2 Design Change Control Changes to approved design output document's, including field changes, shall be justified, subjected to control measures commensurate with those applied to the original design, and shall be reviewed and approved by the same design organization that approved the original design unless other organizations are specifically designated. Where a significant design change is necessary because of an incorrect design, as appropriate, Power Plant Engineering or Fuel Resources shall determine the cause of the incorrect design.As necessary, design and verification procedures shall be reviewed and modified to correct the cause of the incorrect design.V 0 c ss 2 rn I tu C 0 u During the operations phase, design changes shall also be reviewed by operating plant management including plant Quality Control.The intent of this review is to ensure that implementation of the design change is coordinated with any ecessaLy changes to perating procedures and practices and required~Surveillance activities4n accordance with plant A po y)s:l't, g I'gh'~1 TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 FLORIDA POWER 4 LIGHT COMPANY DESIGN C TROL Rev.Date"june 10, 1986 Page 0 of 6 3.2.3 D esign Change Control (Cont'd)p p+I/+technical specification requirements, n MP t rema ed design changes are reviewed by the Plant Nuclear Safety Q (PNSC)or Facility Review Group (FRG)and the Company Nuclear Review oard (CNRB).3.2.3 Design Interface Control The design organization shall be responsible for identification, control, resolution and documentation of design interface requirements. Procedures shall establish interface controls between participating organizations and between the various technical disciplines within the design organization. These procedures shall include the assignment of responsibility, and be in sufficient detail to cover the preparation, review, approval, release, distribution and revision of design output documents. For interdisciplinary design, approval documentation of.each involved discipline, of the design organization shall appear on the design output document or on a separate document directly traceable to the design output.The design organization shall designate a discipline(s) responsible for resolution of the comments of participating organizations. The designated discipline(s) approval of a design output shall also document resolution of the comments of participating organizations. 3.2.0 Design Verif ication try 8 Z cn r or E 0 Design control measures shall be established to independently verify the design inputs,, design process, and that design inputs are correctly incorporated into design output.The design organization shall develop procedures that govern design verification. These procedures shall require that the design organization identify and document the verification method utilized and that the documentation clearly identify those individuals performing the design verification. gl I'g r'g f 1 1~C l4 gV T TOPICAL QUALITY ASSURANCE REPORT R ev.DESIGN CONTROL Date 3une IO 1986 Page of 5 6 Hg Design Verification (Co'd)'"~s,:, g, Design verification shall be p hSigt gf'iy qualified individual(s) or group(s)other than those who performe gn.The original designers and verifiers may both be from the design organization. Design verification by the designer's immediate supervisor shall be limited to those instances where the supervisor is the only qualified individual available within the I design organization. These instances are further restricted to designs where the supervisor did not specify a singular design approach, or did not restrict design methods or alternatives, or did not specify design inputs (unless the specified design inputs have already been independently verified). 3ustification for verification by the designer's immediate supervisor should be documented along with the extent of the supervisor's involvement in the design.The design organization shall be responsible for determining the extent of design verification and methods to be employed.The methods may include one or more of the following: the performance of design reviews, the use of alternate calculations, or the performance of qualification tests.This shall apply to original design and to changes to approved design output.Where reverification is not required for a design change the bases shall be documented by the design organization. Cursory supervisory reviews and mathematical checks for calculation accuracy do not satisfy the independent design verification requirement. Design verification shall normally be completed prior to release of design output for procurement, manufacture or release by the design organization for use in design activities by a participating organization. Verification shall be conducted based on the status of design at the time of release of design documents. Where this timing cannot be met, verification may be deferred provided that the unverified portion of the design output, and all design output p~Of 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 3.0 I DESIGN CONTROL Date 3une 10, 1986 Page 6 of 6 3.2.0 Design Veri f ication (Cont'd)documents, structures, systems and components based on the unverified portion of design are identified and controlled. In all cases verification shall be completed prior to relying on any affected items to perform their design functions. 3.2.5 Computer Codes Organizations utilizing computer codes as a method for design shall maintain instructions or procedures to effect the following: 1.That such codes are verified for their particular use using benchmark problems, alternate calculations, comparison with other code or experimental results, design review or similar methods, 2.That such codes have been qualified for their specific application suf f icient to ensure valid results, 3.That such codes are provided with user instructions sufficient for a technically competent individual to follow, 0.That configuration controls are provided to assure that such code changes or modifications are documented and c oiled.P 1"Pz.q r..-,,~'4/t'P~8 2 Ol e 0 V Ql ir PI h 8pm TOPICAL QUALITY ASSURANCE REPORT DESIGN CONTROL Rev.TQR 3.0 June 24, 1988 Page 1 of 3.1 GENERAL RE UIREMENTS A Quality Assurance Program shall be established for design-related activities. This design control program shall ensure that the design is defined, controlled and verified;that applicable design inputs are specified and correctly translated into design output documents; that design interfaces are identified and controlled; that design adequacy is verified by persons other than those who designed the item;and that design changes, including field changes, are governed by control measures commensurate with those applied to the original design.Design records shall be developed to provide evidence that the design process and design verification were performed in accordance with the requirements of design organization (FPL's Quality Assurance Ppogram.The<>t+~G.w'h.eer c the'uel Resources Department or designated contractor organization) shall be responsible for the content of these records.Design records shall include design output documents and the important steps in the design effort.The intent of this documentation is to allow a technically qualified person to understand how the design was developed, and to allow that person to verify the design based on the design documentation and engineering data sources referenced therein.gr3, R'-CORU i j~~~l f~l QO j~~$vo~SUppgsj~Ji'.>I l pl'A TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date June 24, 1999 Page 2 Of 7 3.2 IMPL19KNTATION The design organization's Quality Assurance Program for design control shall be approved by the FPL Quality Assurance Department. prior to the release of approved design output by the design organization. The design organization is the organization responsible for approval of design output.Quality Procedures and Quality Instructions shall be developed to delineate design control requirements go~ming design-related H'u c(C.Sr-W~<~egg t'~activities performed by and the Fuel Resources Department and for their delegating activities to contractor organizations. 3.2.1 Design Process The design organization shall specify and document its design activities to the level of detail necessary to permit the design to be developed in a correct manner and to permit verification that design output documents satisfy design input requirements. Design methods, materials, parts, equipment and processes, including those associated with commercial grade items that are essential to the function of the structure, system or component shall be selected, reviewed and approved for sui:tability of application by the design organization. 0 C 0 Z Ob Ol E 0 4 e I 11 1 li)I~~4 Sl TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date June 24, 1988 Page 3 of 7 3.2.1 Design Process (Cont'd)Design inputs shall be identified, documented, reviewed and approved by the design organization. They shall be specified to the level of detail necessary to permit the design activity to be carried out in a correct manner, and to provide a consistent basis for making design-related decisions, performing design verification and evaluating design changes.Changes to approved design inputs, including the reason for the changes, shall be approved, documented and controlled by the design organization. The design organization shall identify aspects of, manufacture, construction, inspection and testing critical to achieving the function of the structure, system or component. Quality standards and quality requirements shall be specified on design output or procurement documents. Changes from approved quality-related requirements specified in design output, including the reason for the changes, shall be approved, documented and controlled by the design organization. Design analyses shall be controlled and documented. Approved design output documents and approved changes thereto shall be relatable to the design input by documentation in sufficient detail to permit verification. The design organization shall establish procedures to review industry design experience. As appropriate, this experience shall be made available to cognizant design personnel. "\I s,j 0 TOPICAL QUALITy ASSURANCE REPORT Rev.TQR 3.0 DESIGN CONTROL Date June 24, 1999 Page 4 0f 7 3.2.2 Design Change Control Changes to approved design, output documents, including field changes, shall be justified, subjected to control measures commensurate with those applied to the original design, and shall be reviewed and approved by the same design organization that approved the original design unless other organizations are specifically designated. Where a significant design change is necessary because of an Q~cA~Resources shall determine the cause of the incorrect design.As necessary, design and verification procedures shall be reviewed and modified to correct the cause of the incorrect design.During the operations phase, design changes shall also be reviewed by operating plant management including plant Quality Control.The intent of this review is to ensure that implementation of the design change is ,coordinated with any necessary changes to operating'I procedures and practices, and required Quality Control Surveillance activities. In accordance with plant technical specification requirements, nuclear safety related design changes are reviewed b an lg Nuclear Safety Committee (PNSC)or Faci1i the Company Nuclear Review Board (CNRB).ID cv 0 C 0 z Ol CV 0 L i 1'g'l'Pf(3 TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date June 24, 1988 Page 5 of 7 3.2.3 Design Interface Control The design organization shall be responsible for identification, control, resolution and documentation of design interface requirements. Procedures shall establish interface controls between participating organizations and between the various technical disciplines within the design organization. These procedures shall include the assignment of responsibility, and be in sufficient detail to cover the preparation, review, approval, release, distribution and revision of design output documents. For interdisciplinary design, approval documentation of each~involved discipline of the design organization shall appear on the design output document or on a separate document directly traceable 1 to the design output.The design organization shall designate a discipline(s) responsible for resolution of the comments of participating organizations. The designated discipline(s) approval of a design output shall also document resolution of the comments of participating organizations. 3,2.4 Design Verification ID CO OI 0 C 0 z Ol N 6 0 U.Design control measures shall be established to independently verify the design inputs, design process, and that design inputs are correctly incorporated into design output.The design organization shall develop procedures that govern design verification. These procedures shall require that the design organization identi document the verification method utilized and th'on clearly identify those individuals pe fo'.design verification. pg'f,hh+1 ggv~'..-'- t~I TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.6 Date June 24, 1988 Page 6 of 3.2.4 Design Verification (Cont'd)Design verification shall be performed by technically qualified individual(s) or group(s)other than those who performed the design.The original designers and verifiers may both be from the design organization. Design verification by the designer's immediate supervisor shall be limited to those instances where the supervisor is the only qualified individual available within the design organization. These instances are further restricted to designs where the supervisor did not specify a singular design approach,'or did not restrict design methods or alternatives, or did not specify design inputs'unless the specified design inputs have already been independently verified). Justification for verification by the designer's immediate supervisor should be documented along with>he extent of the supervisor's involvement in the design.The design organization shall be responsible for determining the extent of design verification and methods to be employed.The methods may include one or more of the following: the performance of design reviews, the use of alternate calculations, or the performance of qualification tests.This shall apply,to original design and to changes to approved design output.Where reverification is not required for a design change, the bases shall be documented by the design organization. Cursory supervisory reviews and mathematical checks for calculation accuracy do t satisfy the independent design verification requi lO'O N~y$4)$*~~0 C 0 2 Ol CV E 0 LL Agp i" t I TOPICAL QUALITY ASSURANCE REPORT TQR 3.0 DESIGN CONTROL Rev.Date June 24, lgSS Page 7 of 7 3.2.4 Design Verification (Cont'd)Design verification shall normally be completed prior to release of design output for procurement, manufacture or release by the design organization for use in design activities by a participating organization. Verification shall be conducted based on the status of design at the time of release of design documents. Where this timing cannot be met, verification may be deferred provided that the unverified portion of the design output, and all design output documents, structures, systems and components based on the unverified portion of design are identified and controlled. In all cases verification shall be completed prior to relying on any affected items to perform their design functions. 3.2.5 Computer Codes Organizations utilizing computer codes as a method for design shall maintain instructions or procedures to effect the following: 1.That such codes are verified for their particular use using benchmark problems, alternate calculations, comparison with other code or experimental results, design review or similar methods, 2.That such codes have been qualified for their specific application sufficient to ensure valid results, 3.That such codes are provided with u'ser instructions sufficient for a technically competent individual to follow, lO CV 4, That configuration controls are"provided e h code changes or modifications are document d 0 C 0 2 th CV C 0 U. tI/1~I g'I'I II 1 TOPICAL QUALITY ASSURANCE REPORT TQR 0.0 Rev.FLORIDA POWER e LIGHT COMPANY PROCUREMENT DOCUMENT CONTROL Date June l0, l936 Page l of 3 O.l CENERAL RE UIREMENTS Oti ICE Procurement of items and services shall be performed in accordance with procedures which assure that applicable regulatory requirements, design bases, code requirements, and other requirements necessary to assure quality shall be included or invoked by reference in the procurement document.These procedures shall delineate the sequence of actions to be accomplished in the preparation, review, approval, and control of procurement documents. Changes to procurement documents shall be subjected to the same degree of control as utilized in the preparation of the original documents. r ORD 0.2 IMPLEMENTATION P!"';~/!"!.'T T!)l~QQcf tÃt=~.~T 0.2.l Procurement Document Provisions 34PF.RS':I3'-0 Quality Procedures and Quality Instructions shall identify the responsibilities and actions required of the organizations originating, reviewing, approving, and controlling procurement documents. These procedures shall require the procurement documents to specify: a.The scope of work to be performed. b.Technical requirements (by specifying or referencing) which shall include the applicable components and materials identification requirements, drawings, specifications, procedures, instructions, codes, and regulations and provide for identification of applicable test, inspection and acceptance requirements, or special process instructions. Q,val I W M s~r'n C4P c.~Pt'Ogram requirements to be imposed on contractors which shall include the applicable portions of 10 CFR 50, Appendix B.d.Right of access which provides, as appropriate, for access to contractor facilities and records for inspection or audit by FPL or its designated representative, and to access for events such as-witness and hold points. 4 4~I~J TOPICAL QUALITY ASSURANCE REPORT Rev.T R 0.0 FLORIDA POWER It LIGHT COMPANY PROCUREMENT DOCUMENT CONTROL Date 3une 10, 1986 Page Gf 0.2.1 Procurement Document Provisions (Cont'd)e.The documentation required to be prepared, maintained, and/or submitted to FPL or its representative for review, approval, or historical record.The time of submittal of this documentation and the retention and disposition of quality assurance records which will not be delivered to FPL shall be prescribed. Consideration shall be given to the need for special requirements in the preparation and review of"procurement documents. Procedures and instructions shall be prepared and implemented for special on-site handling or storage requirements. The receiving department shall be responsible for on-site implementation of the special handling, shipping, and storage requirements for items received and controlled by their organization. nEPOPD Special handling, preservation, storage, cleaning, packaging, and shipping requirements shall be specified, as appropriate, in the design documents or purchase orders.The requirements established in the design documents or purchase orders shall be consistent with industry accepted standards, the importance of equipment or material to nuclear safety, and the material or equipment's sensitivity to damage.The preparation of these design documents or purchase orders may be delegated by FPL to other organizations. The preparation and control of design documents and purchase orders is describe'd in TQR 3.0.0.2.2'rocurement Document Review Procurement documents shall be reviewed for correctne cta ility and controllability of quality requirements in accordance with Quality Procedures and Quality Instructions to assure that the appropriate provisions t7I e 0 Z (7l Ol e 0 4

TOPICAL QUALITY ASSURANCE REPORT Ftev.FLORIDA POWER t LIGHT COMPANY PROCUREMENT DOCUMENT CONTROL Date 3une 10 1986 Page 3 0.2.2 Procurement Document Review (Cont'd)of Section 0.2.1 are included.This review shall be documented and performed by designated technical and quality evaluators, and shall assure that the procurement document was prepared, reviewed and approved as required.Spare or replacement parts for safety~elated structures, systems, and components are subject to technical or quality requirements equivalent to or I better than those used for the original equipment. Changes to procurement documents, whether initiated by FPL or their representative, are subjected to the same degree of control as that utilized in the preparation of the original document.0 0.2.3 Selection of Procurement Sources The Purchasing, Fuel Resources or Corporate Contracts Department, as applicable, shall verify that the procurement document has been reviewed and approved, and that the supplier has been approved prior to issuing the purchase order for safety related materials or services.Supplier approval is not necessary if the important characteristics of the item can be verified by inspection or test.The overall procurement requirements including those<elate to planning, bid GLuNI evaluation, and review and concurrence of suppliers pf'ograms are described in Quality Procedures and Quality Instructions. V)8"Z N e 0 4 I 0 XP I TOPICAL QUALITY ASSURANCE REPORT TQR 4.0 PROCUREMENT DOCUMENT CONTROL Rev.Oate June 24, 1988 Page'of 3 4.1 GENERAL RE UIREMENTS Procurement of items and services shall be performed in accordance with procedures which assure that applicable regulatory requirements, design bases, code requirements, and other requirements necessary to assure quality shall be included or invoked by reference in the procurement document.These procedures shall delineate the sequence of actions to be accomplished in the preparation, review, approval, and control of procurement documents. Changes to procurement documents shall be subjected to the same degree of control as utilized in the preparation of the original documents.

4.2 IMPU9KNTATION

4.2.1 Procurement

Document Provisions Quality Procedures and Quality Instructions shall identify the responsibilities and actions required of the organizations originating, reviewing, approving, and controlling procurement documents. These procedures shall require the procurement documents to specify: 0 0 C 0 Z Ol M N E 0 U.a e b.The scope of work to be performed. Technical requirements (by specifying or referencing) which shall include the applicable components and materials identification requirements, drawings, specifications, procedures, instructions, codes, and regulations and provide for identification of applicable test, inspection and acceptance requirements, or special process instructions. ~'/1 ($>j4a TOPICAL QUALITY ASSURANCE REPORT TQR 4.0 I PROCUK9KNT DOCUMENT CONTROL Rev.Date June 24, 19SS Page 2 of 3 4.2.1 Procurement Document Provisions (Cont'd)c~d.e.Quality Assurance Program requirements to be imposed on contractors which shall include the applicable portions of 10 CFR 50, Appendix B.Right of access which provides, as appropriate, for access to contractor facilities and records for inspection or audit by FPL or its designated representative, and to access for events such as witness and hold points.The documentation required to be prepared, maintained,= and/or submitted to FPL or its representative for review, approval, or historical record.The time of submittal of this documentation and the retention and disposition of quality assurance records which will not be delivered to FPL shall be prescribed. Consideration shall be given to the need for special requirements in t: he preparation and review of procurement documents. Procedures and instructions shall be prepared and implemented for special on-site handling or storage requirements. The receiving department shall be responsible for on-site implementation of the special handling, shipping, and storage requirements for items received and controlled by their organization. N 0 IA C 0 z~i CV E 0 Special handling, preservation, storage, cleaning, packaging, and shipping requirements shall be specified, as appropriate, in the design documents or purchase orders.The requirements established in the design documents or purchase orders shall be consistent with industry accepted standards, the importance of equipment or material to nuclear safety, and the material or equipment's sensitivity to damage.The preparation of these design documents or purchase orders may be delegated by FPL to other organizations. The q preparation and-control of design documents'and purchas'e orders is descri4M~g I,Q,g Q.O.'Q 8' gt 410 l,a Wl~ TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 4.0 PROClJREMENT DOCUMENT CONTROL June 24, 1988 Page 3 of 3 4.2.2 Procurement Document Review Procurement documents shall be reviewed for correctness, and inspectability and controllability of quality requirements in accordance with Quality Procedures and Quality Instructions to assure that the appropriate provisions of Section 4.2'are included.This review shall be documented and performed by designated technical and quality evaluators, and shall assure that the procurement document was prepared, reviewed and approved as required.Spare or replacement parts for safety-related structures, systems, and components are subject to technical or quality requirements equivalent to or better than those used for the original equipment. Changes to procurement documents, whether initiated by FPL or their representative, are subjected to the same degree of control as that utilized in the preparation of the original document.4.2.3 Selection of Procurement Sources The Purchasing, Fuel Resources or Corporate Contracts Department, as applicable, shall verify that the procurement document has been reviewed and approved, and that the supplier has been approved prior to issuing the purchase order for safety related materials or services.Supplier approval is not necessary if the important characteristics of the item can be verified by inspection or test.The overall procurement requirements including those related to planning, bid evaluation, and review and concurrence of suppliers Quality Assurance programs are described in Quality Procedures and Quality Instructions. ~~s)if ii/H TOPICAL QUALITY ASSURANCE REPORT TQR 5.0 FLORiOA POWER a LiGHT COMPANY INSTRUCTIONS, PROCEDURES, AND DRA%'INGS R ev.Date June 10, 1936 Page 1 of 3 5.1 GENERAL RE UIREMENTS Activities affecting quality of nuclear safetymelatedgtructures, systems, and components shall be prescribed by documented instructions, procedures, or drawings of a type appropriate to the circumstances and shall be accomplished in accordance with these instructions, procedures, or drawings.These documents shall include appropriate quantitative criteria such as dimensions, tolerances, and operating limits, and qualitative criteria such as comparative workmanship samples, to assure that the quality assurance activity has been satis accomplished. qI, P';CORD 5.2 IMPLEMENTATION ~g II@>>5.2.1 Quality Assurance Program Documents The FPL Quality Assurance Manual described in TQR 2.0 contains corporate Quality Procedures which comply with the criteria of 10 CFR 50, Appendix B.Quality Procedures and department level Quality Instructions provide direction for activities affecting quality.The Quality Assurance Department reviews and comments on Quality Instructions written by+ther,.QLvB L departments. Comments concerning compliance with corporate<~commitments and requlatory requirements are resolved prior to issuance.The Quality Assurance Department receives controlled copies of Quality Instructions issued by other departments.

5.2.2 Procedures

and Instructions Instructions and procedures for activities affecting quality shall be prepared, reviewed, and approved in accordance with written Quality Procedures or Quality Instructions. k 4s 1 C~ TOPICAL QUALITY ASSURANCE REPORT INSTRUCTIONS, PROCEDURES, AND DRAWINGS Rev.TQR 5.0 3une l0, l936 Page 2 of 3 5.2.2 Procedures and Instructions (Cont'd)For plant operations, on-site plant procedures shall be prepared, reviewed, and approved in accordance with written instructions which includes a review for concurrence by Quality Assurance or Quality Control personnel. These plant procedures include operating procedures, off-normal and emergency procedures, test procedures, and calibration procedures. Also included are, maintenance and repair procedures for subcontracted maintenance and repair activities which are outside the normal scope of plant craft capability. For backfit activities, contractors shall be required to have Quality Assurance Programs which contain written instructions for preparation, review, and approval of procedures, instructions, and drawings affecting quality.In addition, Contractor's site procedures and Quality Control inspection procedures shall be approved by FPL Project Site Manager, or his designee, following reviews by Quality Assurance or Quality Control personnel to assure compliance with Corporate commitment and regulatory requirements. During the design, modification, and procurement phases, the Architect/Engineer or other contractors may be delegated responsibility for maintaining, issuing and verifying the implementation of appropriate program documents. In this case, Quality Assurance Department audit and/or Construction Quality Control surveillance activities shall assure that such measures are established and implemented. Contractor programs shall clearly delineate the actions to be accomplished in the preparation, review and control of instructions, procedures and drawings, and the methods for complying with the appropriate criteria of 10 CFR 50, Appendix B.A plant change or modification of a magnitude requiring thq assignment of a't General Manager-Nuclear shall be subject te tnesett'Or rtI Qi in above.Ptu.R" V)C 0 Z cs es e 0 4 ll Q1 TOPICAL QUALITY ASSURANCE REPORT TQR 5.0 INSTRUCTIONS, PROCEDURES, AND DRAWINGS Rev.6 Date 3une l0, l936 Page 3 of 3 5.2.3 Drawings The design organization is responsible for review and approval of drawings.For delegated design activities, as appropriate, the Power Plant Engineering Department or the Nuclear Fuel Department may approve changes to drawings.The technical control of drawings, i.e., review and approval of the drawing and all changes thereto shall be governed by procedures. A means shall be developed and updated as required to identify approved drawings and revisions thereto.A Master Drawing List is the normal means used for this.5.2.0 Acceptance Criteria Quality Procedures and Quality Instructions require that quality related instructions, procedures, and drawings include adequate quantitative and qualitative acceptance criteria, as appropriate, for determining satisfactory work performance and quality compliance. These acceptance criteria requirements apply to important activities such as design, operations, test control, inspection, and plant modifications. Eh t CV e 0 L4 'lg' TOPICAL QUALITY ASSURANCE REPORT TQR 5,0 INSTRUCTIONS, PROCEDURES AND DRAWINGS Rev.Date June 24, 1988 Page 1 of 4 5.1 GENERAL RE UIREMENTS Activities affecting quality of nuclear safety-related structures, systems, and components shall be prescribed by documented instructions, procedures, or drawings of a type appropriate to the circumstances and shall be accomplished in accordance with these instructions, procedures, or drawings.These documents shall include appropriate quantitative criteria such as dimensions, tolerances, and operating limits, and qualitative criteria such as comparative workmanship samples, to assure that the quality assurance activity has been satisfactorily accomplished.

5.2 IMPLEMENTATION

5.2.1 Quality Assurance Program Documents LD CO N 4 The FPL Quality Assurance Manual described i corporate Quality Procedures which comply with the criteria of 10 CFR 50, Appendix B.Quality Procedures and department level Quality Instructions provide direction for activities affecting quality.The Quality Assurance Department reviews and comments on Quality Instructions written by other departments. Comments concerning compliance with corporate Quality Assurance commitments and requlatory requirements are resolved prior to issuance.The Quality Assurance Department receives controlled copies of Quality Instructions issued by other departments. VP C C)2 Ol Ol E 0 U. i(4~1 4 I g) TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 5.0 INSTRUCTIONS, PROCEDURES AND DRAWINGS June 24, 1988 Page 2 of 4 5.2.2 Procedures and Instructions Instructions and procedures for activities affecting quality shall be prepared, reviewed, and approved in accordance with written Quality Procedures or Quality Instructions. For plant operations, on-site plant procedures shall be prepared, reviewed, and approved in accordance with written instructions which includes a review for concurrence by Quality Assurance or Quality Control personnel. These plant procedures include operating procedures, off-normal and emergency procedures, test procedures, and calibration procedures. Also included are maintenance and-.-" repair procedures for subcontracted mainten~an up+pe'pspr>activities which are outside the normal'c e~'8i plah't craft capability. sly~ss e For backfit activities, contractors shall be r jink to~hhvW>>.- Quality Assurance Programs which contain writte a.ons for preparation, review, and approval of procedures, instructions, and drawings af fecting quality.In addition, Contractor' site procedures and Quality Control inspection procedures shall be approved by FPL Project Site Manager, or his designee, following reviews by Quality Assurance or Quality Control personnel to assure compliance with Corporate commitment and regulatory requirements. During the design, modification, and procurement phases, the Architect/Engineer or other contractors may be delegated responsibility for maintaining, issuing and verifying the tg F%0'i$P yL TOPICAL QUALITY ASSURANCE REPORT TQR 5.0 INSTRUCTIONS ~PROCEDURES AND DK9fINGS Rev.Date June 24, 1988 Page 3 of 4 5.2.3 Procedures and Instructions (Cont'd)implementation of appropriate program documents. In this case, Quality Assurance Department audit and/or Construction Quality Control surveillance activities shall assure that such measures are established and implemented. Contractor programs shall clearly delineate the actions to be accomplished in the preparation, review and control of instructions, procedures and drawings, and the methods for complying with the appropriate criteria of 10 CFR 50, Appendix B.A plant change or modification of a magnitude requiring the assignment of a Project General Manager-Nuclear shall be l subject to the Quality Assurance Program as discussed in above.5.2.3 Drawings The design organization is responsible for review and approval of rawi gs.For delegated design activities,, as appropriate, the Engineering Department or the Nuclear Fuel Department l may approve changes to drawings.The technical control of drawings, i.e., review and approval of the drawing and all changes thereto shall be governed by procedures. A means shall be developed and updated as required to identify thereto.A Master Drawing List is approved drawings and ns the normal s sed lD CO CiI O 0 Vl C 0 z Ol N 0 4. g 1~,~' TOPICAL QUALITY ASSURANCE REPORT TQR 5.0 INSTRUCTIONS, PROCEDURES AND DRAWINGS Rev.pate June 24, 1988 Page 4 of 4 5.2.4 Acceptance Criteria Quality Procedures and Quality Instructions require that quality-related instructions, procedures, and drawings include adequate quantitative and qualitative acceptance criteria, as appropriate, for determining satisfactory work performance and quality compliance. These acceptance criteria requirements apply to important activities such as design, operations, test control, inspection, and plant modifications. >l(r 0 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 6.0 DOCUMENT CONTROL 3une 10, 1986 Page 1 of 3 6.1 GENERAL RE UIREMENTS The distr'ibution of'documents such as instructions, procedures, and drawings'which provide guidance, specifications, or requirements affecting the quality of nuclear safety-related structures; systems, and components shall be controlled. These documents shall be prepared, reviewed for adequacy, and approved for release by authorized personnel in the effected organization. These documents shall be distributed to locations where the activity is performed. "";.'t"-."eo sPt sg gp g Quality Procedures shall, delineate the control measures for c ed documents including direction for the review for adequacy, approval by authorized personnel; distribution of controlled documents and verification I that changes are received.These control measures shall apply to documents affecting the quality of nuclear safety~related structures, systems, and components such as: 6.2 IMPLEMENTATION 4 6.2.1 Responsibility Changes to controlled documents shall be so identified and shall be reviewed and approved by the same organization that performed the original review.and approval unless otherwise specified in the implementing procedures. In addition, procedures shall provide for controlling obsolete documents to preclude the possibility of use of outdated documents. a.design specifications; b.design, manufacturing, construction, and installation drawings;c.quality program manuals, procedures, and instructions; I 4 gi(1 f' TOPICAL QUALITY ASSURANCE REPORT TQR 6.0 FLORIDA POWER 8 LIGHT COMPANY DOCUMENT CONTROL Rev.3une 10, 1986 Page 2 of 3 6.2.1 Responsibility (Cont'd)d.inspection, manufacturing, and test procedures and instructions; e.plant operating and maintenance procedures; f.plant Safety Analysis Reports and related design criteria documents. The requirements for control of procurement documents are contained in TQR 0.0.During all phases of the plant life, it shall be the responsibility of each organization issuing and using controlled documents to use document control procedures. Procedures shall document the responsibility for review, approval, maintenance and distribution of documents including assuring revisions are initiated to interfacing documents within their organization. During the design and construction phase and for operating plant changes under their cognizance, the Architect/Engineer, Nuclear Steam Supply System vendor, and other contractors shall be responsible for assuring that all revisions required as a result of FPL comments, nonconformances, or engineering work are incorporated into revised documents.

6.2.2 Distribution

of Controlled Documents Quality Procedures shall specify that controlled documents and revisions be distributed to locations, where the activity is performed. j L p' TOPICAL QUALITY ASSURANCE REPORT R ev.T R 6.0 FLORIDA POWER&LIGHT COMPANY DOCUMENT C NT ji/Ir/j'~m u/T'ag 3" 3 Date 3une 10, 1986 6.2.3 Dra wing Control documents. P>>44~'J ep FPL assumes control of the drawings and Master Drawt ist after initial operation of the facility or delegates this activity to a qualified contractor. The Power Plant Engineering Department shall require that participating design organizations update the drawings and Master Drawing List to reflect the as-built conditions of the facility prior to FPL's acceptance of these Maintenance, distribution and control of the drawings and the Master Drawing List by FPL during the operation phase shall be assigned to a drawing custodian. Revision to drawings shall be approved prior to release by the drawing custodian, approval shall be-by, as appropriate, Power Plant Engineering, Nuclear Fuel, or a design organization designated by one of these departments. During the operation phase a system shall be established to provide ready access and availability of drawings to engineering and operations personnel; to identify drawings affected by approved plant design changes;and to update drawings and the Master Drawing List to reflect implemented design changes.6.2.0 Instruction 2 Procedure Control Participating organizations shall be responsible for development, maintenance and control of those documents identified in paragraph 6.2.1 issued by them as controlled documents. Each organization shall be responsible for the adequacy of their procedures. 6.2.5 Obsolete Documents Controls established by Quality Procedures and Quality Instructions shall assure that outdated copies of controlled documents are not inadvertently usedo 4'l J.~1~fgl e*s TOPICAL QUALITY ASSURANCE REPORT TQR 6.0 DOCUMENT CONTROL Rev.Date June 24, 1988 Page 1 of 4 6.1 GEMBVLL RE UIREMENTS The distribution of documents such as instructions, procedures, and drawings which provide guidance, specifications, or requirements affecting the quality of nuclear safety-related structures,-systems, and components shall be controlled. These documents shall be prepared, reviewed for adequacy, and approved for release by authorized personnel in the effected organization. These documents shall be distributed to locations where the activity is performed. Changes to controlled documents shall be so identified and shall be reviewed and approved by the same organization that performed the original review and approval unless otherwise specified in the implementing procedures. In addition, procedures shall provide for controlling obsolete documents to preclude the possibility of use of outdated documents.

6.2 IMPLEMENTATION

6.2.1 Responsibility

Quality Procedures shall delineate the c pt".A~,h: <<r pw At~ye P(QV~U measures for controlled documents including direction for the review for adequacy, approval by authorized personnel, distribution of controlled documents and verification that changes are received.These control measures shall apply to documents affecting the quality of nuclear safety-related structures, systems, and components such as: Vl c 0 Z lh Ol E 0 U. I Sg 0 TOPICAL QUALITY ASSURANCE REPORT TQR 6.0 DOCUMENT CONTROL Rev.oa e June 24, 1988 Page 2 of 4 6.2.1 Responsibility (Cont'd)a e b.C.design specifications; design, manufacturing, construction, and installation drawings;quality program manuals, procedures, and instructions; d.inspection, manufacturing, instructions; and test'rocedures and e.plant operating and maintenance procedures; plant Safety Analysis Reports and related design criteria documents. The requirements for control of procurement documents are contained in TQR 4.0.During all phases of the plant life, it shall be the responsibility of each organization issuing and using controlled documents to use document control procedures. Procedures shall document the responsibility for review, approval, maintenance and distribution of documents including assuring revisions are initiated to interfacing documents within their organization. ID CV During the design and construction phase and for operating plant, changes under their cognizance, the Architect/Engineer, Nuclear Steam Supply System vendor, and other contractors shall be responsible for assuring that all revisions required as a result of FPL comments, nonconformances, or engineering work are incorporat~ed into revised documents. C 0 z Ch lh CV E 0 If~ff7 4I'4 I'4 7P j4' TOPICAL QUALITY ASSURANCE REPORT TQR 6.0 DOCUMENT CONTROL Rev.Date June 24, 1988 Page 3 of 4 6.2.2 Distribution of Controlled Documents Quality Procedures shall specify that controlled documents and revisions be distributed to locations where the activity is performed. 6.2.3 Drawing Control FPL assumes control of the drawings and Master Drawing List after initial operation of the scil,ity or delegates this activity to a N v c.l C ZH qualified contractor. Engineering Department shall require that participating design organizations update the drawings and Master Drawing List to reflect the as-built conditions of the facility prior to FPL's acceptance of these documents. Maintenance, distribution and control of the drawings and the Master Drawing List by FPL during the operation phase shall be assigned to a drawing custodian. Revision to drawings shall be approved prior to release by the drawing custodian, approval shall be by, as Mo,l~appropriate, Engineering, Nuclear Fuel, or a design organization designated by one of these departments. ID Ol~s gi C 0 Z E7I Ol E 0 During the operation phase a system shall be established to provide ready access and availability of drawings to engineering and operations personnel; to identify drawings affected by approved plant design changes;and to update drawings and the Master ing List tc reflect implemented design changes.~~-r:i'>'~~J\l~A 1 (Jg TOPICAL QUALITY ASSURANCE REPORT TQR 6.0 DOKJMENT CONTROL Rev.Date June 24, 1988 Page 4 of 4 6.2.4 Instruction 6 Procedure Control Participating organizations shall be responsible for development, maintenance and control of those documents identified in paragraph 6.2.1 issued by them as controlled documents. Each organization shall be responsible for the adequacy of their procedures. 6.2.5 Obsolete Documents Controls established by Quality Procedures and Quality Instructions shall assure that outdated copies of controlled documents are not inadvertently used.ID co ct 4 lA C O Z Ol Ol E h 0 IL JÃ"i QJ.i/g', 0 TOPICAL QUALITY ASSURANCE REPORT TQR 7.0 R ev.0 FLORIDA POWER 8 LIGHT COMPANY CONTROL OF PURCHASED ITEMS AND SERVICES Dace 3une 10, 1936 Page 1 of 3 7.1 GENERAL RE UIREMENTS importance, complexity, and quantity of the product or service.ggIII9 go"-~~j(S Procurement source evaluation and selection measu e specified in Quality Procedures and Quality Instructions which shall identify the responsibility of qualified individuals for determining supplier capability. The evaluation may require integrated action involving Quality Assurance and one or more organizations (e.g., Engineering, Construction, Fuel Resources or Purchasing) based upon the item or service being procured.This evaluation is to ensure that the FPL contractors comply with the applicable portions of 10 CFR 50, Appendix B.Documented evidence of the evaluation, and the acceptance of the contractor's quality program and procedures shall be retained in the Quality Assurance Department files.The determination of supplier approval shall be based on such factors as prior performance, historical quality performance data, source surveys or audits, and evaluation of the supplier's QA Program.The basis shall be consistent with the importance, complexity, and quality required for the items or services involved.7.2 IMPLEMENTATION 7.2.1 Initial Evaluation of Suppliers Measures shall be established to assure that safety>>related items or services purchased by or for FPL conform to the requirements of the procurement document.These measures shall include documented evidence of source selection, verification activities and examination of items or services to assure compliance with the procurement document.The effectiveness of the control of quality by contractors and subcontractors shall be assessed at intervals consistent with the 4 H 4 E. ~~~~~0~~~~~~,~~0~~~~~~0~~~~~~I~~~~~'~~~~~~~~~~~~~~f~~~~~~~~~~~~~~~~~~~~~~~~0~-~-~~~+~~~~~~~~~~~~~~S~~I'0~~~~~~~~~~~~~~I~~-~~0~'~~~'I~~~~~~~ ,~I' TOPICAL QUALITY ASSURANCE REPORT Rev.T 70 FLORIOA POWER 5 LIGHT COMPANY CONTROL OF PURCHASED ITEMS AND SERVICES Date 3une 10 1986 Page of 3 3 7.2.3 Receiving Inspection (Cont'd)e.Measures to ascertain that inspection records or Certificates of Conformance are available prior to release.7.2.0 Supplier Furnished Records 0 Records required to be furnished by the supplier shall be specified in the procurement document.Certifications or documentation verifying conformance provided by the supplier shall identify the specific procurement requirements met (either by reference to the purchase order or by referenced requirements therein).Such certification shall identify any procurement requirements which have not been met and provide a description nonconformances dispositioned"accept as is" or"repair"{Qh ag'gN 1')I Vl'H 4 IL 4 t TOPICAL QUALITY ASSURANCE REPORT TQR 9.0 FLORIDA POWER 8 LIGHT COMPANY CONTROL OF SPECIAL PROCESSES Rev.Date 3une 10, 1986 Page l of 3 9.I GENERAL RE UIREMENTS 0 9.2 IMPLEMENTATION Measures shall be established to assure that special processes such as welding, heat treating, and nondestructive examination, are controlled and accomplished by qualified personnel using qualified procedures and equi tn a ordance with 8 ,applicable codes, standards, specifi'cOregii)d other special\requirements. Pe)s t$t a~o P~e~Engineering Department, uel Resources Department or the delegated contractor organization, as appropriate, shall include special process requirements in their design outputs and changes thereto.Special processes used during plant operations shall be the responsibility of the plant manager, who shall ensure that procedures are developed, reviewed, approved and controlled, and that personnel and equipment are qualified.

9.2.1 Identification

of Special Processes Special processes are those processes which must be qualified and controlled where quality is highly dependent on close control of process variables or operator skills, and objective verification (inspection, examination or testing)of end quality is di f f icult.srs C O 2 cs e 0 4 As a further clarification, special processes identified as such by applicable codes and standards shall be controlled, qualified, and implemented in accordance with those codes and standards. Examples of special processes include (but are not limited to)welding, heat treating, and nondestructive examination. Others, i.e., flushing, protective coating, plating applications and nuclear cleaning should be reviewed to determine if they are special processes. 'l'\l.)~(I I(g If A t I J pI TOPICAL QUALITY ASSURANCE REPORT TQR 9.0 Rev.CONTROL OF SPECIAL PROCESSES June 10, 1936 Page 2 of 3 9.2.2 Procedure Qualification and Control Process control procedures written by FPL organizations or their contractors shall be used and qualified as required by applicable specifications, codes, or standards. Inhere FPL assigns work to outside contractors, the contractors shall make their procedures and personnel qualifications available for review to FPL prior to the start of work.The Architect/Engineer, Nuclear Steam Supply System vendor, or other organization designated by FPL shall be responsible for the evaluation and acceptance of on-site contractor special process procedures, and shall interface with the appropriate FPL department, as necessary, to resolve review comments with the contractor. The contractor shall also be responsible for the control and approval of sub-contractor procedure~ 9.2.3 Personnel Qualification and Certification Procedures or instructions shall specify certification requirements. Personnel respo verification of special processes shall be tr y@$&nel'ual>fjcagieq I and sigh:,~fth8 Id:ifwrhs~dei and:"J>i ed, and certified as required by applicable specifications, codes and standards. Requirements for the period of certification, retesting, and recertification of personnel shall also be specified. Contractors shall qualify personnel and maintain records of qualified personnel in accordance with applicable codes, standards, specifications, and contract or procurement document requirements. 9.2.0 Special Process Records The Plant Manager is responsible for the review and retention of records.Records shall provide objective evidence that special processes were performed in compliance with approved procedures by qualified personnel and ~i h 0 TOPICAL QUALITY ASSURANCE REPORT" Rev.TQR 9.0 FLORIDA POWER 8 LIGHT COMPANY CONTROL OF SPECIAL PROCESSES 3une 10, 1986 Page 3 Gf 3 9.2.0 Special Process Records (Cont'd)equipment. Records shall also be maintained for verification activities when required by procedure, code or specification. Results of nondestructive examinations shall be recorded in accordance with applicable specifications, codes and standards. These records shall be retained by the vendor or supplied to FPL as required by contract or purchase orders.If records are to be retained by the vendor, the contract or purchase order shall specify the retention period and instructions for final disposition of such records.For backfit activities, the Construction Quality Control organization is responsible for the review of nondestructive examination documents for acceptance. The Project Site Manager is responsible for assuring that documents for special processes utilized for modifications are properly collected, reviewed, accepted and transmitted for retention of records.'6 4'4g 1 Z Ol I CV e 0 4 rl 0'1~k'A TOPICAL QUALITY ASSURANCE REPORT TQR 13.0 FLORIDA POWER 4 LIGHT COMPANY HANDLING, STORAGE AND SHIPPING Rev.Date 3une 10, 1986 Page 1 of 2 13.1 GENERAL RE UIREMENTS 13.2 IMPLEMENTATION 13.2.1 General Written instructions or procedures shall be established and implemented for the cleaning, shipping, storage, preservation, packaging, and handling of specified items.These instructions and procedures shall delineate measures which prevent degrading an item through damage or deterioration. When necessary for particular products, special protective environments such as inert gas atmosphere, specific moisture content levels, and temperature levels shall be specified and provided.//~I O-,..f":.)n 5>>/Instructions or procedures shall be written to define the requiremerrts-<hd responsibilities for the cleaning, packaging, preservation, handling, storage, and shipping of equipment and material, and shall require implementation of the established design and specification requirements by personnel having appropriate'ualifications. FPL may delegate any por tion of the responsibility for handling, storage and shipping of material and equipment, but shall retain ultimate responsibility. Where any of the functions in the section which follow is delegated to a contractor, the contractor shall be required to adhere to the FPL requirements stated herein.13.2.3 Handling, Storage, and Shipping Procedures Materials and equipment which are to be incorporated into a safetymelated system of a nuclear power plant shall be handled, stored, and shipped in accordance with written procedures, where necessary, to implement the'design document and purchase order requirements. These procedures shall assure that cleaning, handling, storing, packaging, shipping, and preserving lg I TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 13.0 FLORIDA POWER 5 LIGHT COMPANY HANDLING, STORAGE AND SHIPPING 3une 10, 1986 Page 2 Gf 13.2.3 Handling, Storage, and Shipping Procedures materials, components and systems will preclude damage, loss, or deterioration by environmental conditions, such as temperature or humidity.The preparation and/or implementation of these procedures may be delegated to other organizations, but FPL shall retain the ultimate responsibility for proper material handling, storage, and shipping.13.2.0 Verification of Proper Handling, Storage, and Shipping.The Quality Assurance Department shall be responsible for verification of proper handlinz, stora e and shipping at vendor facilities. The Plant 6ikJ L Pk5$vt Q.Manager and the epartment shall e responsible for verification of proper handling, storage, and shipping at the plant. "I Il LJ II'$l'%pa V 1 l'$g~$y I y1$D 1 p TOPICAL, QUALITY ASSURANCE REPORT TQR 15.0 FLORIDA POWER 8 LIGHT COMPANY NONCONFORMING MATERIALS, PARTS OR COMPONENTS R ev.6 ate 3une 10, 19 e 1 of ag 15.1 GENERAL RE UIREMENTS Measures shall be established to control erials, parts, or components which do not conform to requirements in order to prevent their inadvertent use or installation. These measures shall include, as appropriate, procedures for identification, documentation, segregation, disposition, and notification to affected organizations. Nonconforming items shall be reviewed and accepted, rejected, repaired or reworked in accordance with documented procedures. 15.2 IMPLEMENTATION 15.2.1 Program Quality Procedures and Quality Instructions shall define the responsibilities and methods for identifying, documenting, segregating and dispositioning nonconforming items.For procedure review requirements, see TQR 2.0 and TQR 5.0.Each department shall be responsible for the identification, control, and disposition of nonconformances within the scope of their departmental responsibilities. Throughout plant life, FPL may delegate any portion of the identification and control of nonconforming items and services to an Architect/Engineer (A/E), constructor, NSSS vendor or other contractors. In any case, FPL retains the responsibility for assuring that requirements are met, and shall assure that the contractor's actions conform to requirements set by FPL. T J~~i J W$( TOPICAL QUALITY ASSURANCE REPORT TQR l5so Rev.FLORIDA POWER 4 LIGHT COMPANY NONCONFORMING MATERIALS, PARTS OR COMPONENTS Date gune l0 l936 Page 2 of 15.2.2 Documenting and Controlling Nonconformances All nonconformances in safety related items shall be documented and reported for corrective action.Measures shall be delineated in Quality Procedures and Quality Instructions which control further processing, installation, or operation of nonconforming items.These measures 1 include: a.~PhySiCal identifiCatian Of the item aS ncnCOnfcr in'-<au&r g(.p b.Segregation of nonconforming items until propert drsp'osjIIoitggI.g Where physical segregation is not practical, suitable rags, marking or documentation shall be used to assure control.15.2e3 Documentation Documentation of the nonconforming item shall: identify the item;describe the nonconformance; show disposition of the nonconformance and inspection requirements; and include the signature of the person approving the disposition. 15.2.0 Evaluation and Disposition Power Plant Engineering, Nuclear Fuel, Nuclear Energy, or the delegated contractor organization, as specified by procedure, shall evaluate nonconformances and disposition them based on the results of the evaluations. These evaluations and dispositions shall be reviewed, approved and documented in accordance with procedures. ,ha f~'t 4 gl I Cg TOPICAL QUALITY ASSURANCE REPORT TQR 15.0 FLORIDA POWER 4 LIGHT COMPANY NONCONFORMING MATERIALS, PARTS OR COMPONENTS Rev.Date 3une l0, l 986 Page 3 of l5.2.0 Evaluation and Disposition (Cont'd)An evaluation to determine the disposition of nonconforming items shall be performed. The evaluation shall determine whether an item is to be accepted as-is, repaired, reworked, or rejected.A technical evaluation shall be performed when an item is accepted as-is or is repaired to an acceptable condition. Records of the disposition of these items shall be made part of the nonconformance report.This evaluation shall assure that the final condition does not adversely effect safety, operability or maintainability of the item, or of the component or system in which it is installed. The A/E, pr other contra tors on-site, shall be required to inform the FPL Shawl, Constructio or uclear Energy Department prior to use or installation of a nonconforming item.The nature and extent of a nonconformance and the reason for proposing its use or installation shall be justified. Nonconforming items dispositioned"accept as-is", or repaired to an acceptable condition, shall be so identified. Nonconformance reports for those items shall be made part of the item records and forwarded with the material to FPL.b.Safety of personnel; The determination of the need and the advisability of releasing nonconforming materials items, is made by the Power Plant Engineering, Constructiorp or uclear nergy Departments. The following rs may be appropriate considerations in making this determination: pe a.Effect on the orderly progress of odftif ttnattgtbtl or~it4 s are released;gO gg)~~@A c.Suitability of materia!or items in"as-is" ndition, i.esr probability of eventual satisfactory resolution of the nonconformance without repair, t rework, or replacement; Sa TOPICAL QUALITY ASSURANCE REPORT TQR l 5.0 Rev.FLORIDA POWER a LIGHT COMPANY NONCONFORMING MATERIALS, PARTS OR COMPONENTS Da~e 3une 10 1986 Page Q of 13.2.0 Evaluation and Disposition (Cont'd)d.Accessibility of material or items after release;e.Cost of removal and repair of replacement should material or items eventually have to be removed, repaired, or replaced;f.Impact on plant safety.Items shall be reworked or repaired in accordance with documented procedures and shall be verified by reinspecting the item as originally inspected or by a documented method which is at least equal to the original inspection method.Quality Assurance or Quality Control personnel shall periodically review nonconformance reports to identify quality trends.The results of these analyses shall be reviewed with appropriate members of up ev management. ~@9 I J~II b TOPICAL QUALITY ASSURANCE REPORT TQR 15.0NONCONFORMING MATEKGKS, PARTS OR COMPONENTS Rev.Date May 10, 1988 Page 1 of 4 15.1 GENEKQ RE UIREMENTS Measures shall be established to control materials, parts, or components which do not conform to requirements in order to prevent their inadvertent use or installation. These measures shall include, as appropriate, procedures for identification, documentation, segregation, disposition and notification to affected organizations. Nonconforming items shall be reviewed and accepted, rejected, repaired or reworked in accordance with documented procedures. 15.2 IMPLEMENTATION tC~'tQ~ll'5.2.1 Program Quality Procedures and Quality Instructions T)~q>-): s w.p fl~+'8~,i s'!.~.~"'define the responsibilities and methods for identifying, documenting, segregating and dispositioning nonconforming items.For procedure review requirements, see TQR 2.0 and TQR 5.0.Each department shall be responsible for the identification, control and disposition of nonconformances within the scope of their departmental responsibilities. ID CO N Throughout plant life, FPL may delegate any portion of the identification and control of nonconforming items and services to an Architect/Engineer (A/E), constructor,.NSSS vendor or other contractors. In any case, FPL retains the responsibility for assuring that requirements are met, and shall assure that the contractor's actions conform to requirements set by FPL. <g'I TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 15.0 NONCONFORMING MATERIALS,'ARTS OR, COMPONENTS May 10, 1988 Page 2 of 4 15.2.2 Documenting and Controlling Nonconformances All nonconformances in safety related items shall be documented and reported for corrective action.Measures shall be delineated in Quality Procedures and Quality Instructions which control further processing, installation, or operation of nonconforming items.These measures shall include: a~b.Physical identification of the item as nonconforming. Segregation 'f nonconforming items until dispositioned. properly Where physical segregation is not practical, suitable tags, marking or documentation shall be used to assure control 15.2.3 Documentation Documentation of the nonconforming item'shall describe the nonconformance; show disposition o 4l'-'",".,~ ..'~i}s ,j.dentjgy., the item;.i Che.-norrcaf} f ormance and inspection requirements; and include the signature of the person approving the disposition. 15.2.4 Evaluation and Disposition ID CO N Engineering, Nuclear Fuel, Nuclear Energy or the delegated contractor organization, as specified by procedure, shall evaluate nonconformances and disposition them based on the results of the evaluations. These evaluations and dispositions shall be reviewed, approved and documented in accordance with procedures. tjf c f I F t$~e<<<~U p>>I d I<g 0 TOPICAL QUALITY ASSURANCE REPORT NONCONFORMING MKTERIZKS, PARTS OR COMPONENTS TQR 15.0 Rev.7 May 10, 1988 Page 3 Of 4 15.2.4 Evaluation and Disposition (Cont'd)An evaluation to determine the disposition of nonconforming items shall be performed. The evaluation shall determine whether an item is to be accepted as-is, repaired, reworked or rejected.A technical evaluation shall be performed when an item is accepted as-is or is repaired to an acceptable condition. Records of the disposition of these items shall be made part of the nonconformance report.This evaluation shall assure that the final condition does not adversely effect safety, operability or maintainability of the item, or of the component or system in which it is installed. The A/E,, or other contractors on-site, shall be required to inform the FPL Construction Management or Nuclear Energy Department prior to use or installation of a nonconforming item.The nature and extent of a nonconformance and the reason for proposing its use or installation shall be justified. Nonconforming items dispositioned"accept as-is", or repaired to an acceptable condition, shall be so identified. Nonconformance reports for those items shall be made part of the item records and forwarded with the material to FPL.The determination of the need and the advisability o nonconforming materials or items, is made by the eleasing Engineering, Construction Management or Nuclear Energy Departme The following factors may this determination: be appropriate c p~gPaki g IO CO N a.Effect on the orderly released;b.Safety of personnel; progress of work , Ql'IL II'I y 4 TOPICAL QUALITY ASSURANCE REPORT Rev.TQR 15.0 NONCONFORMING MATERIALS, PARTS OR COMPONENTS May 10, 1988 Page 4 of 4 15.2.4 Evaluation and Disposition (Cont'd)co d.e.Suitability of material or items in"as-is" condition, i.e., probability of eventual satisfactory resolution of the nonconformance without repair, rework, or replacement; Accessibility of material or items after release;Cost of removal and repair of replacement should material or items eventually have to be removed, repaired, or replaced;Impact on plant safety.Items shall be reworked or repaired in accordance with documented procedures and shall be verified by reinspecting the item as originally inspected or by a documented method which is at least equal to the original inspection method.Quality Assurance or Quality Control personnel shall periodically review nonconformance reports to identify quality trends.The results of these analyses shall be reviewed with appropriate members of upper level management. ID CO Ol P D 0 C 0 z Oi~N CV C 0 1L C'J fE>I 4 tiCSIDCNT C I t CV I I V l VICE titSIOCNI K 1 t CV I I V E VICC PAESIDENT SCNIOi VICE thtllOtNI VTCC tiCSIDCNI COAORITC SlIYICCS ANO CNICS SINANC'IAL OSSICEA SCNIOI VICE thtSIDCNT CONPANV NVCLCM itY ICY SOAID OUILITV ASSVIANCt CONNI'litt SCNIOI VICE tilSIOCNT NVCLC M OIICCIOA~COIPOAAIC CONTRACTS YICt titSIOKNI 011CCIOI DS MOClNCNCNI AND NAItIIAL NSNT CICCUllvt ASSISTANT I NINASCA Of COitOMTC CONIAACIS COItORAIC SECRE'TAIT NANASt1 OF tUiCNA I I NI VICE PAKSIDCNT tOVCA DCLTVMT DliCCTOI Of CONS I I VC I I ON CillS ENSINCtA POVt1 PLANT DIIKCTOA Of PIOJCC'I l NANASEA OF CMtOAA'It ACCMOS SEAVICCS SVtlhvll01 Of DOCVNCNIAAT F ILCS NANASCA Of INVENTORY AETOVAC\S OTACC'101 Of SVCLS NANASCA Of tLNIT CONSThVCI lON NANISl1 CONSIIVC'I ION SC VtLOINS ANO NDC OUTSIDE CONSVLIANTS FNLICCT SCNCRN.NANASCA DIRECTOR Of CNVIAONNCNTIL Af f Alit NANASCA Of tOVM PLANI~IMC~NANASCI OF NVCLCAI SVKL CONS MVC 1 I 01 SVPEAINTCNOthl STIFF SC COOADTNAIOA PROJECT TMN CONt NIT C 1 V I i INN C N TAL iCVIC'V MOUS NANISCI Of CNVIAONNCNIAL CCNNTCAL SMVICCS 0IACC'101 POYCA SUPPLY CONSTAVCTION PMSONNCL PIDNCT SC SVtthvlSOA NANASEA Of CivliONNCNIAL ICSOVACCS~PLANNIN~NANATCI Of CNVIIONNENIIL PEINI'I'111 'tiOSAANS NANASCI~TSICN tiOICC'I ION NANISCA Of POVKA SVttLV TCCNNICIL SCAVICCS NOC LEVEL III~VPCIVISOA VELD INS SVttil NICNDCNt Slit YICC PRCSIDCNT TWIXKY POINI NVCLCIA SPECI~IC SITC OISINT TAT ION lh f1~I t VICC PICSIDCNT NUCLEAR CNCRST SITE VICE PAESIOCN SI,LVCIC SPECIFIC SITE OISANI I ATION IN Sl~I NANISCA PLAIN INS NIO CONTROL NANISCA NUCLEAR ENCAST SCRVICCS 0 IICCTOA OUALI IT ASSINANCE NANAK'NUCLtAA ENtiST NAINIENANCC NANASCA NVCLEM TANITNS SVPMINIENOtil OA 11, LVCIC NANISlA SVtthlNTCNOCNI OUILI'll ASSININCC OA~CAVTCCS TINKCT tOINT NANISM PIOCINCNKNT ~iKLIASTL I'I'I TOPICAL OUALITT ASSURANCE REPORT OISANITI'IION Of DEPAA'INCNTS ISFCCtlNS SVALITT FISVIC I I APPENDIX I~SV.~~~alt~~ASK I~I~OVALITT ISNNANCC PAOSAAN ACVICV CONNITlt I OAPIC I Cid OC SA 7 SKVSII) e t 0 tRCSIDCNT EXECUTIVE VICE tRCSIDEHI C K C CU f I V E'YIKE thESIDENT VICE tRESIDENT COAORATC SERVICES ANO CHtlt FINANCIAL OFFICER SCN ION VICE thMIDCNT SENIOR VICE PRESIDENT EOHPANY NUCLCAA ACVICY SOARS DUALITY ASSURANCE OOHNI TICE SENIOR VICE tRCSIDCNI NUCLEAR CYCCUTIVC ASSTSTANT DIACCTOR CORPORATE CONTRACTS HAHASCA OF CUR t OAR I K CONTMCfS OIRCOTOR OF PROCURENCNT ANO 11TCRI1L NONI HAHASCR Ol'URCHAS f HO VICE thCSIOENI COAtOAA I E SCCRETAAT VICE PRESIDENT tOVM DELTVCAY DIRECTOR OF COIISTRUCI ION DIREClOR OF t ROUE CPS CHIKF CNOINMR FOYER tLAIII NAHAOEA Ot INVENTORY RESOURCES HANASCR OF C SAPOR 4 I C hCCOAOS SERYICES SUtMVISOR OF DOCUHENIAAY FILCS NAHAOCA Ot tOVKR tLANT STOAES DIRTC'TOA OF CNVIROHHCNTAL AFF1IAS DIRECTOR OF FUCLS HANASE1 OF HUCLCAA F UK I.HANASEA COIISIRUCI IOH OO YELOINO AND HDE STAFF OC COORS I HAT OR NANASEA OF PLANf CONSTRUCT I OH CONSTRUCTION SUPMTNICNOENT PROJECT OENEAAL HANASCR PA<LOOT TEAN OUTSIDE CONSULfANIS COHtANY C NV I 1 0 IIN C II I 4L REYTEV OAOUP NAH4SCA OF CHYIROHNCHTAL ECHN ICAL SERVICES DIRCCTOA POSER SUttLY HANAOEA SYSTCN tROICCTI ON PROJECT OC DUPERY I SOA NDC LCVCL Ill SUPMYTSOR CONSTAUOTTOII tCASONIIEL SITE VTCC tACSIDCNf TUARCY tOINT NUCLEAR SPECIFIC SITC ORSAHTTAII ON INFIO I 2 DMCCfSR OUAL IVY ASSURANCE HANAS E 4 PAOCUREHKIIT S ACLI1SILITY Sl'lC VICE PRESIDENT ST.LUOIC SPECIFIC SITE OASANIIAIIOII IN Fl~I VICC PRESTDKNT NUCLCAR CNCRST DIRECTOR NUCLEAR LICCNSINO NANASCA OC CNVIROHHCIIT4L RESOURCES 1~LANNfNS 14HASCR OF CNVIROHNCHIAL ~CRNITIINO PAOSRAHS HAIIASCR OF tOVER SUttLV TECHNICAL SCAVTECS VCLDIHO SUPMINTENOCNT SU t C 1 I N I C ROC N I OA'TURRET tOIN'l NANAOCR NUCL C11 f11 I Hl NS SUPCRIIIIENOCNI OA Sf LUClC HAH1OE 1 NUCLEAR EHCRST NAINfCNAHCC NANASE1 OIHILI'IY ASSUIAIICC SCRVICCS~IAHASCA NUCLEAR CNCRST SCAVIOCS TOPlCAL OUALlTY ASSURANCE REPORT OASANTTATTOH OF DEtARTNKNTS AFFECT I NO OUALTTT FISURC I I AttCNDIE 1~TY INIK IIIMVV PNVK~I DUALITY ASSURANCE PAOSRAH REVICV COHHITTE NANAOCA tLAHNINO ANO CONTROL OAO OO OA T 42TSIAV t" K.Wp~e ll~r PRES IOEN1 5 et CU1 I et VICC PRESIDENT tatCUTIvt VICC PRESIDCN'I VICC PRESIDENT COJSINATC 5tRvlCIS WeO CNltf SINANCIAL Off ICIR SENIOR vlCt PRE510CNI SENIOR VlCC PRC510CNT CCev arv sasCLCM Rtvltr 10a10 Oukl O'Ie ASSeaekrtt CONTI IICC W RIOR VICC PRESIDENT NUCLE M DISIECIOR COSLPCNA Tt CONIRAC15 OIREC'ICR Of PROGast K Nl kKs NATIRIAL NANACEKNT VLCC PRESIOleel V ICt PRESIDENT POstR OCLIVERV 5 at C le I I vC ASSISTMT NANACIR Of CORPLNa TC CONTRAC15 luleACI 1 Of~URCNASINS CORPORATE 5ECK TART DIRECTCN Of SUEL5 DIRCCTCR Of CONS'IRUCTION DIRECTOR Of~ROJCCTS tf I ER 1 NANALIR Of INVINIORT K 50IATC 1 5 SIANACE1 Of CORP(Nk1C RtCC105 5ESIVICC5~IANACER Of SASCLCM fUCL NkakCtR CS~I AN1 COTSTRvt'I IOe~ROSIE T CENERAL NkelkSCR SQNALER Of PONER PL Wel 5 I Oet 5 SUPCRV I SON OS DOCVKNTMT S ILE5 OISICC101 POUER SUSPL T CONSTRUCIIOe 5uvt 11 1 I I sOE N I pROIECT TcaN OIRCCTOI OUALITV JSSURMCC SWE VICC PAt510Esel luelaCV POINT sasct 5 M 511t vlCC SRC510Csel 5T~LOCI C VICC P1E510Csel sasCLIM tslCRCT OI JECICR Of I NVIRONKN'IAL JSSAIRS NANAEE 1$151ISS PSLOIECIION C OJW RVC'I l ON PC ITS ORE L NANASIR PROCURE IC NT~RELIAOILIIT 5PCCIS IC SIIC OAEAN 1 1 a I I ces IN SIS.I.C 5PEClflC 5WC ORCANIIAT ION Iss f15.1 OIRECTOI NUCLEAR 5 ICE Nt I se5 COPANT tseVIRONNENTAL RtvSIN CROUP NANALER a POKR SUPPLV TttsveI Cat 5CRVTCE5 NANACI I CONWRVCTICN oc NELOINC kate SESS 5UPtlllrlt SCSENI Ok Tuaatv POINT slksucl1 sascecAR TRAININS slkseAcc1 os t NVIRONKNIAL Rt SOURCE 5~~\klvelNL SIASS OC COCNOINATOSI 5UPE 11 1 I t fest N I OA 51,LUCIC NANASIR NUCLEM EKRCV seklsellNANCC NANACER Of t NVIROVNNTAL TECNNICAL 5CSLVICE5 PROJECT OC SUPERTI50ll NANACE 1 Casak I'l ASSURANCE SCRVICC5 SIANJLC1 NUCLCM EKRCT StRVICCS NANACC1 Of CNVIRONKNIAL PIRNIT TINS A~1051 JNS SESS LCVtt lll SIPCRV150ll Oskk I IV ASSURANCE PROLRAII Rtvltr COINII'IEC NANALC1 PLASeerNS ANO CCNIROL NELDINO SUPERINTENDENT ~Met]/as'V j'Ae(y J'HIS g(.-(,.-, 5R>Q jf~-f':;5 4')~Ls l'$l;~W m4vha@C.Pvc,LCb%g,%~C~TOP!CAL OVAL ITT ASSNTARCE REPORT OREANIEATICN Of DCPARINEN15 ASS tCTINC OVALIIT Slkuat I I APPINOIA A REV.II OJIE~Ielesaa PALE I Of I CADE Jkll~101 100 'ki'C~lX r pl!'r SITE YICC TAESIDENT TVAECT POINT PLANT NANASCA UNCLEAN 5EAYICES NANASEA NVCLCM SITC AAOJECT AANME A ENS INC t A I NS~EA PLMI SECUAIIT svrtAYI501 ALAN I NUCLCM~Af t I Y COUNT f TCC EIAC TAONCTION SWE AY ISOA<egg Hs~rdeuS w~ste ceord4a J6'c 6'~r.ovPV~uhc(t V s PMw.Jv&0)]opec,) ENGINE~SwPV~siW ft~Mci d~cuC<LI/O4,~~PV.Ott AA I I ON 5 5 WC 1 I N I t NOC 1 f NUCLE AA OUALIIT CONTAOL SWEATISOA ItCNNI CAT.SEAM TAE N f SWfAY I SOA S4 f11ININS MINNNANEC SVAE A INTENOENT NUCLE M 0&to-uBAv<s gf C.else S.~6g VEAL IN ANTS ICS SVYCAYISOA ACACTOA 5WEAYISOA Wf AAI IOUS SWEATI SON CNCNISIAT 5VYEAYISOA r cadt.uPy.I 1 5 I AUNE N'I ANO CONTAOL SUTCAYISOA A55 I SIANI SVACA IN ENOENI Nt OMNI CAL MINNNANCC CVC5606 155ISTANI SWE1INTCNOf NI ELCCT1 ICAL NA IN f f NANCE g~III~pc,g44C jb0vLs AtACTOI ENSINCCA j PLANT SWEAT I50A NUCLC M I SAD I NUCLEOLI T1fCN CNS INC CA I MOI et'SEc et'uPV~oC4%ed~wAI~<46IPV.PPc@ERAT QQPVY TNIIPP iPu1 so PttW,*$ne T'.~QPbbg~~N l-.I~,, glES I-.)K i&I4'o S Ca NUCLCM CONTAOL CfNTCA OttAATOA I 101 VNL I C t N 5 t 0 OAEAATOAS sysrCwl guHhdC~CESO&0~oAFl5.CC4V f;>cIN.~XTTCYTS s~PV Pg.oa..gp6QP6 JPg.TOPICAL QUAL I TY ASSURANCE REPORT IHlHlg lglhl CuPPe g gPQLQI50 A IN%;5/8C.TAh as<H 4 Sv P&tV Es44 (AS ASsr so peA ure9Mt Ooze 6C h 6a 0 PS//TTUf1 iver cdag O.CAO OC OA 7 52 st%~IUAXEY POIHI HUCLEAA SIIE OAOAHIZAYIOH FISUAE 1-2 APPEHOIX A AET.0 5/10/00 OAf C~AS I~I aKN>iaaS gu~lJl$0l~ t4 f 51d 4(I P l"'P"'t pg 41 A JT SITE Tiff PASS IOCNI Sl LICIC tLAN'I NANASCA P4ge~t.hhAA/h OCUL gwwt c~M~SOPH 5't e)cog)aAv< SVPV SCAYIC ES NANASCA QQ05c~Poor SV Pu AOII I N I 0 I 1 1'I I YE SWfAYISOA c~~M~C~hu ks&u5~S TAf PA 0 I C CT I ON SVtCAYISOA gf)$&~Pf 0~Sf)V~I PS<%cV gypDSPLvcA~> Sc)(04ta%04)IG)TI PLANT SCCVAI'IY SWCAYISOII Otf NATIONS SWCAINICNOCNI 'TAAININS SVPEAYI SOS I E f NN I 0 AL 0ltAATNENT 50tfAYISOA OVAL I I Y CONIAOL SVtCA Y I SOA NA I N I E NANT E SVtCA!NTCNOCN'I VEAL TN tNYS ICE SVPEAYISOII ACAOTOA SVtCAY ISOII OtCAAIIONS SWEAT ISOA I SAOI CNCNISTAY SVPCAY I SOA INSTAVNCNT ANO CONTAOL SVPEAYISOA ASSI IANI SVPC1IN ENOCNI AC CNAN I COL NAINICNANCC 1 S S I 0'I AN I EWE 0 I N I E NOT 0 I CLCCTA ICAL NAIN'ICNANCC c S SCT phv R C4T)g,P svPv.o>d~5LI~~~1 (~-C:>1f AC TOA CNSINECA NVCLCAA PLANT SWCAYI SON I SAOI ASSI IANI NVCLEAA tLWI SVt 4 1 Y I SOA ISAOI CON I AOL CENIEN Ot C11 I 01 ISO I VNL I C C 1 Sl 0 OPCAAIOAS g)~m/Qi~40$Sf)Pv.H'<os~IFAVlAN.QAOmIN.SoPv.AV.x c o b8afi gaow$QPVA'NTR ST)POT.IC KIGL V Vo SNIPI TCCNNICAL OATS COprrto4 S&vl (Og Stuicb ivy fEc,f7~G gd~C)(BtA<I~~ ')tj)u C 84~0~<47.g C'cthe~v)yt C t'Q6Ae 0QL.'pth irU)M SG)PAM S~@~v<<R-ICE<<ANIL Iq$sz t)fbg.r$'M f/'/SSd g CAO OC GA-T-S S TOPICAL QUAL'I TY ASSURANCE REPORT ST LUCIE PLAH'T.UHITS I 0 G GTTE OAGAHIZATIOH FIGURE I-5 APPEHOIX 4 1CY PACE~I I gl, 4 I r<,~1"'P 0 P 1 pl(,6%0f~l 5tJCS g/LHl>~~IXI'F ICCRKS NML AICN1 0 IL&L.IIXCS 0 SIFCS m ac raum na omar IUICE IDCBC ICI NNQJQR DBLIl%CHIC QD SQQlHS D FILI.I IKCN%1M LIQKX 50 Ul IX'IXID MmES GWDWGlk IQUlIDO I MÃN5 aua ln SHAM tRCllGS IF IUNIH5 HW?5~QX NQCN JX I QX I I NHQ I it@, 54 IUld0 ll AX I C I yL-f 1Il'T'J l t TOPICAL OUALITY ASSURANCE REPORT TURKEY POINT NUCLEAR SITE ORGANIZATION 88148801.ROi FIGURE 1-2 APPENOIX A f.IJ'a'f>~.1P'l'I 1I t 4r ik SIIK TIDE IaSMIT ST.LATE 511K Dlf DKBDJS QIESTISN INJECT LEAD JJJJLITT CNTJCL 404TI0CTTDI J:JSLJA'dZLJC T ION OCJPJJÃSPLSO g-Ja DJISTMTITE QJ%JITISN I IIE I%Off elf a SIPKSTISN JQJCTa QPESTISN IUJJT LIIJSIN OSLO JEJCTN TKCJJJICIN NJLEJ0'IJJJT QPESTISN (SMI 555 I STJJJT NJSSJQ IUJJT SNESTISN ISSCI$KCTJOJJIESI GJTISOIKNIJL 0 JasISTMTTN QIEXTISa 0fsfa CN TEL JJJLP JSSISTJlf QPQINDCKJTT %CJDJJICL MTIKSJJCE J$$ISTJJT 5ltff JTDJJDJT KJECTJICL MDJTKMJCE JEJLDJ INlSICS TEOJJICQ.QIKSTISN JIITJOIS I CCJNJT Na 5JSTE QICfffa JSXIJSnfTT 5 QIINT QPEJT1$N TOPICAL QUALITY ASSURANCE REPORT ST.LlÃIE PLAIT,IPIITS I d Z SITT.ORGJIIIZATIOI dd Id ZSOI.1IOO FM I.)JPPOOIX d 0JIE IDIT Sd IJJE OI I ~l)%c Cf FLORIDA POWER 8 LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES Rev.Date 3une IO l986 Page Gf I 10 P NUMBER/TITLE I.l CANCELLED 2.1 CANCELLED (Terms and Definitions contained in the QA Manual Glossary)2.2 REVISION OF THE TOPICAL QUALITY ASSURANCE REPORT 2.3 QUALITY ASSURANCE PROGRAM REVIEW 2.0 PREPARATION AND REVISION OF QUALITY INSTRUCTIONS 2.5 QUALITY ASSURANCE INDOCTRINATION AND DEPARTMENTAL TRAINING 2.6 CANCELLED 2.7 IDENTIFICATION OF NUCLEAR SAFETY RELATED AND SAFETY RELATED DESIGN FEATURE STRUCTURES, SYSTEMS COMPONENTS AND SERVICES SECTION DESCRIPTION gA RECQRQ PE",,lpga, 1 lT OQt Ufttt c SgpKRS$9F-9 Provides instructions for the revision of the Florida Power R Light Company Topical Quality Assurance Report (FPL TQAR).Describes the instructions and methods used for establishing, preparing, issuing, revising and controlling Quality Procedures employed in supporting quality requirements. Provides the responsibilities, guidelines and methods used for developing and.revising Quality Instructions, based upon QP's, that involve quality activities within a department or organization and are unique to that activity.Describes the requirements for the indoctrination and training of personnel who perform, or are responsible for activities that af feet quality.Describes the development and approval of documents identifying safety related and safety related design feature structures, systems and components. 0 C Ep FLORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES Rev.Date 3une IO 1986 Page of 2 IO P NUMBER/TITLE

2.8 CLEANLINESS

CONTROL METHODS 2.9 QUALIFICATION OF QA AUDIT, QC INSPECTION AND CONSTRUCTION TEST PERSONNEL 2.10 HOUSEKEEPING FOR OPERATING PLANTS 2.11 CANCELLED 2.12 FPL QA PROGRAM APPLICABILITY FOR FIRE PROTECTION SYSTEMS 2.13 PROCESSING OF NRC CORRESPONDENCE SECTION DESCRIPTION Provides criteria for securing good house-keeping.Assigns responsibilities for assuring that the cleanliness of material, systems and structures is maintained. Describes the personnel qualifications that are required to assure that competent QC inspectors, QA auditors, and construction test personnel perform these respective functions. Describes the r onsibilities and controls for house ing t operating nuclear~5,, go Pfieb 5e applicability of the FPL+4/)Jilt~"Assurance Program for Fire Protection Systems.Describes the system for providing responses to NRC initiated action requests.D IJ O Vl 2.10 IMPLEMENTATION OF ASME XI g.l"1 guvzrgsa~t&r~4 4 PA.4e~dACE'0) >>coFEaR,~(H~Ecu<grfg~ r-CANCELLED 3.2 IDENTIFICATION AND CONTROL OF.DESIGN INTERFACES Describes the program and responsibilities for controlling activities defined by ASME Section XI.be<Ie~ggf~S g.+~t y+S<if'~(Ti Aa4 CC'ev deb~~h4 M~ATh~A i~<~f.r guv<&alM~c-%.V pu pt c~4 S~F pJvca.Shat-PLJh~c~t'44M~Describes measures employed for identifying and controlling design interfaces, changes in design interfaces, and modifications that affect documents. t jC FLORIDA POWER&LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES APPENDIX E Rev.9 Date 3une I 0, 1986 Page of lo P NUMBER/TITLE 3.0 PLANT CHANGES AND MODIFICATIONS FOR OPERATING PLANTS 3.5 DESIGN CONTROL AT THE CONSTRUCTION SITE SECTION DESCRIPTION Establishes measures for controlling design changes or modifications in operating nuclear power plants.Defines the responsibilities and methods employed for the initiation, review, evaluation, approval and disposition of field initiated design changes and miscellaneous design documents such as field sketches and isometrics. 0 3.6 CONTROL OF FPL RIG1NA~~QiI DESIGN l 3.7 EVALUATION AND CONTROL OF CONTRACTOR DESIGN FOR NUCLEAR FUEL AND RELATED SYSTEMS O.l CONTROL OF PROCUREMENT ORIGINATED BY OPERATING PLANT PERSONNEL 0.2 EVALUATION OF CONTRACTOR'S BIDS-TECHNICAL 0.3 CANCELLED Covers the preparation, review, and approval of design input documents, design analysis specifications, and design verification for safety related design work originated by FPL.Describes the evaluation and control of contractor designs for fuel related components and analysis.Provides a system to assure that the appropriate technical and quality require-ments are placed upon suppliers who provide materials, equipment, and services for operating nuclear plants as requested by operating plant personnel. Provides the basic evaluation factors for technical evaluations of contractor's bids to supply material, equipment, or services to FPL or FPL's Architect/Engineer. 0.0 REVIEW OF PROCUREMENT DOCUMENTS FOR ITEMS AND SERVICES OTHER THAN SPARE PARTS k Applies to all FPL issued purchase orders and contracts relating to a nuclear power plant, except those originated by operating plant personnel. 4'I~I~pc 1 ex FLORIDA POWER&LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES Rev.Date 3une 10 1986 Page of 10 V 0 07 C 0 2 Ol Ol e 0 4 P NUMBER/TITLE

0.5 PROCUREMENT

OF SAFETY RELATED AND QUALITY RELATED ELECTRICAL. EQUIP MENT 5.1 OPERATING PLANT PROCEDURES 5.2, BACKFIT PROCEDURES 6.1 CONTROL OF CONSTRUCTION PRO3ECT CONTRACTOR DRA WINGS, SPECIFICATIONS AND PROCEDURES 6.2 CONTROL OF DOCUMENTS ISSUED" B Y FLORIDA POWER 2 LIGHT COMPANY 6.3 CANCELLED 6.0 CANCELLED 6.5 CANCELLED 6.6 DRAWING CONTROL FOR OPERATING NUCLEAR POWER PLANTS aP y+A 04 tC-~w4I+c.5 e4 V~gag-t6&~crH.(uR~Mn~~SECTION DESCRIPTION Provides a system to assure appropriate technical and quality requirements are placed on suppliers of electrical equipment for nuclear plants.Describes measures which ensure that instructions and procedures used in operating plants are identified, prepared, reviewed, approved, issued and revised, in accordance with regulatory and FPL requirements. Describes the generation, review and control of backfit procedures. Defines responsibilities and methods for the control and issue of contractor drawings, specifications and procedures to be used during the construction phase of nuclear power plants.Instructions are provided for controlling documents issued by FPL which prescribe activities affecting the quality of safety related items.~='($.Describes method to be used for controlling and updating nuclear safety related drawings for operating plants after turnover from the design organization. A<>>I~%<<<>c as t mlitt;m kccLicatu~~<<ts a~C+t~~'uach 4g J+gg v I~kyPf<< P f f hQ ti' FLORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES APPENDIX E Rev.Oate 3une 10 1986 Page of 5 10 I P NUMBER/TITLE 7.1 RECEIPT INSPECTION OF MATERIALS, PARTS AND COMPONENTS AT THE PLANT SITE 7.2 CANCELLED 7.3 CANCELLED 7.0 EVALUATION OF SUPPLIERS OF SAFETY RELATED ITEMS OR SERVICES 7.5 CANCELLED 7.6 ACCEPTANCE OF ITEMS R SERVICES 7.8 REVIEW AND DISPOSITION OF SUPPLIER DEVIATION NOTICES'7.~(f yy g,++~DE~g~c/(48 S 8.1 IDENTIFICATION R CONTROL OF MATERIALS, PARTS AND COMPONENTS AT THE PLANT SITE SECTION DESCRIPTION Provides instructions for receipt inspection of materials, parts and components which have been obtained for use in nuclear safety applicatio at the operating plant site.~gy9 gpss t,b Provides st ndards, measures, and guide-lines for the evaluation of QA Programs of contractors or suppliers supplying items or services.Describes the responsibilities and requirements for accepting nuclear safety related items or services that are being procured for nuclear power plants.Describes the responsibilities and requirements for the review and disposition of nonconformances identified within a supplier's facility which have resulted or will result in an item which does not fully comply with the FPL procurement document quality and technical requirements. This procedure applies to purchased items which have not yet been shipped.WusDWs W8~/~E Delineates measures for assuring trace-ability, identification and control of items from the time they are received through usage at operating plants. 1 fa Qli <p~5 7I Th~yc c>~ra (rouid e.s~sist~~tn aar~<e.~~Vs+~~ars y~ui8e.a~s;6e scru~~z c~M~~v V~~~av-4~(W n.~p~((~~~~ILL. ') FLORIDA POWER a LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES R ev.9 Date 3une 10 1986 Page of 6 10 P NUMBER/TITLE SECTION DESCRIPTION 8.2 CANCELLED 9.1 CONTROL OF SPECIAL PROCESSES 9.2 C~~M (co~BI&~Mc rOL&.I)Delineates the responsibilities of organ-izations and personnel, and the control and documentation of special processes that are applied to safety related items.e t ems ur>9.0 CONTROL OF WELDING FOR NUCLEAR POWER PLANTS 10.1 CANCELLED 10.2 CANCELLED 10.3 INSPECTION AND SURVEILLANCE Delineates responsibilities and require-ments for control FPL welding processes for nuclear power plants.Delineates responsibilities and requirements for the inspection and surveillance of safety related plant maintenance activities, operation of safety related systems, and fuel handling activities. 10.0 CANCELLED 10.5 CANCELLED 10.6 CANCELLED l et~~i ,K e 4 1 ji t$,~I H 11$W*II (l FLORIDA POWER 8, LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES Rev.9 Date June 10, 1986 Page of 10 P NUMBER/TITLE SECTION DESCRIPTION ('*~Md d c~~b~>~I(f)11.2 ring cpa~et(t J (g (rr t'net~(~(,(%'ns 1 le3 Ca~e,Lt~Ce~11.0 TEST CONTROL 12.1 CALIBRATION AND CONTROL OF MEASURING AND TEST EQUIPMENT 12.2 CALIBRATION CONTROL OF INSTALLED PLANT INSTRUMENTATION AND CONTROL EQUIP MENT emo Defines the measures for control of proof test prior to installation, construction tests, preoperational tests, startup tests, operational tests and retests following repairs, replacements or modifications for nuclear safety related systems, structures, and components. Delineates the responsibilities for implementing the described program for maintenance, calibration and control of measuring and test equipment (Mdc TE).Describes the calibratio ro am, delineates respons'~and establishes QPcont 1 over the calibrat'i+jnatrume tatien.and ant rol qgq@tne~g (AC+c;.0 q h.'l't-~f gui e II ty JT S~f ~~~0~~0~~'~'~~~'~~~~~~~0~~~~~0~~~'~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0~~~~~~~~~~~~~~s~~~...,)o$~~~~~~~~~~~~-.~~~~~~~~g~~r L~I 1g~L'I 0~~~~~~~~~~~~~~~~~~~~~~~~e 0 e~s~~~~0 T'~~I~~~4~~~~r~~~1 ~g, n II I C JA V 4)fa FLORIDA POWER d LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES R ev.9 Date 3une 10, 1986 Page ofP NUMBER/TITLE 15.2 CONTROL OF NONCONFORMING MATERIALS, PARTS, OR COMPONENTS -OPERATING PLANTS 16.1 CORRECTIVE ACTION 16.2 CANCELLED (Combined with 16.1)16.3 CANCELLED (Combined with 16.1)16.0 EVALUATING AND REPORTING OF DEFECTS AND NONCOMPLIANCES FOR SUBSTANTIAL SAFETY HAZARDS IN ACCORDANCE WITH 10 CFR PART 21 16.6 CANCELLED 17.1 THE COLLECTION AND STORAGE OF QUALITY ASSURANCE RECORDS FOR NUCLEAR POWER PLANTS 18.1 PERFORMANCE OF QUALITY ASSURANCE AUDITS SECTION DESCRIPTION Defines the objectives and responsibilities for controlling nonconforming items or services in order to prevent their inadvertent use, installation or application to operating nuclear power plants.Establishes the respective responsibilities of FPL personnel and the procedure for assuring that conditions identified by the FPL QA Department as being adverse to quality, are corrected. gy9 nP 98 gvI<~Wcifies the measures and responsibilities within Florida Power 2 Light to assure compliance to 10 CFR Part 21.Identifies records and documents required to substantiate quality;and, describes measures employed for their maintenance, retention and retrieval. Provides instructions for conducting audits of FPL Quality Assurance Program activities. g W FLORIOA POWER I LIGHT COMPANY TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURES R ev.Date June 10 1986 Page of 10 10 P NUMBER/TITLE SECTION DESCRIPTION 18.2 CANCELLED 18.3 CANCELLED 18.0 CANCELLED~II P,Pt'QRD pQggg),'atilt C~XI l ,i~~g<4t i THlS DOlt~i.1 4? 0 TOPICAL QUALITY ASSURANCE REPORT LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE APPENDIX E Rev.10 Date May 10, j,9SS Page 1 of 11 P NUMBER TITLE 1.1 CANCELLED 2.1 CANCELLED (Terms and Definitions contained in the QA Manual Glossary)2.2 REVISION OF THE TOPICAL QUALITY ASSURANCE REPORT SECTION DESCRIPTION Qe(Provides instructions for the revision of the Florida Power Light Company Topical Quality Assurance Report (FPL TQAR).2.3 QUALITY ASSURANCE PROGRAM REVIEW Describes the instructions and methods used for establishing, preparing,'ssuing, revising and controlling Quality Procedures employed in supporting quality requirements. lO CO Ol 2.4 PREPARATION AND REVISION OF QUALITY INSTRUCTIONS '2.5 QUALITY ASSURANCE INDOCTRINATION AND DEPARTMENTAL TRAINING 2.6 CANCELLED Provides the responsibilities, guidelines and methods used for developing and revising Quality Instructions, based upon QP's, that involve quality activities within a department or organization and are unique to that activity.Describes the requirements for the indoctrination and training of personnel who perform, or are responsible for activities that affect quality.0 C 0 z Ol Ol 0 4. gl ,I'I'gY.~)N II*C, L TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E 10 LIST OF CORPORATE QKLLZI!Y ASSURANCE PROCEDURE May 10, 1988 of 11 P NUMBER TITLE 2.7 1DENTZFICATION OF i%8&8958 SAFETY RELATED WRAIUQ&STRUCTURES i SYSTEMS Ag JV 0 COMPONENTS , A,, Pl SECTION ESCRIR.'ION ~t>>0 g A Describes<QM~, v:pevdlopm'ent and approval o'Q"'identifying safety re e and safety related design feature structures, systems and components.

2.8 CLEANLINESS

CONTROL METHODS Provides criteria for securing good housekeeping. Assigns responsi-bilities for assuring that the cleanliness of material, systems and structures is maintained.

2.9 QUALIFICATION

OF QA AUDIT, QC INSPECTION AND CONSTRUCTION TEST PERSONNEL Describes the personnel INSPECTION qualifications that are required to assure that competent QC inspectors, QA auditors, and construction test personnel perform these respective functions. 2.10 HOUSEKEEPING OPERATING PLANTS Describes the responsibilities and controls for housekeeping at operat-ing nuclear power plants.2.11 CANCELLED 2.12 FPL QA PROGRAM APPLICABILITY FPL FOR FIRE PROTECTION SYSTEMS Identifies the applicability of the Quality Assurance Program for Fire Protection Systems.Cl CII 2.13~PROCESSING OF NRC CORRESPONDENCE Describes the system for providing responses to NRC initiated action requests.0 Vl C 0 Z Ol CII E 0 4 0/gl F~>>II I w la TOPICAL QUALITY ASSURANCE REPORT LIST OP CORPORATE QUALITY ASSUEVLNCE PROCEDURE APPENDIX E Rev.10 Date May 10].9SS Page 3 of 11 P NUMBER TITLE'ECTION DESCRIPTION 2.14 IMPLEMENTATION OF ASME XI 2.17 ENVIRONMENTAL QUALIFICATION (EQ)OF ELECTRICAL EQUIPMENT 3.1 CANCELLED 3.2 IDENTIFICATION AND CONTROL OF DESIGN INTERFACES Describes the program and responsibilities for controlling activities defined by ASME Section XI.Delineates the responsibilities and requirements for maintain'he environmental qualifi as+f nuclear plant compo e~Q V ec>"'",~nb' ~',-o gg Describes measures identifying and con esign interfaces, changes esign interfaces, and modifications that affect documents. 3.4 PLANT CHANGES AND MODIFICATIONS FOR Establishes measures.for controlling OPERATING PLANTS design changes or modifications in operating nuclear power plants.3.5 DESIGN CONTROL AT THE CONSTRUCTION SITE Defines the.responsibilities and methods employed for the initiation, review, evaluation, approval and disposition of field initiated design changes and miscellaneous design documents such as field sketches and isometrics. 3e6 CONTROL OF FPL ORIGINATED DESIGN Covers the preparation, review, and approval of design input documents, design analysis specifications, and design verification for safety related design work originated by FPL. O4 I I TOPICAL QUALITY ASSURANCE REPORT APPENDIX E Rev.10 LIST OF CORPORATE QUALITY ASSUKQiCE PROCEDURE Date May 10.].989 Page 4 Of 11 P NUMBER TITLE SECTION DESCRIPTION 3'EVALUATION AND CONTROL OF CONTRACTOR DESIGN FOR NUCLEAR FUEL AND RELATED SYSTEMS Describes the evaluation and control of contractor designs for fuel related components and analysis.4.1 CONTROL OF PROCUREMENT ORIGINATED BY OPERATING PLANT PERSONNEL Provides a system to assure that the appropriate technical and quality requirements are placed upon suppliers who provide materials, equipment, and services for operating nuclear plants's requested by operating plant personnel.

4.2 EVALUATION

OF CONTRACTOR'S BIDS-TECHNICAL Provides the basic evaluation factors for technical evaluations of contractor's bids to supply material, equipment, or services to FPL or FPL's Architect/Engineer. 4.3 CANCELLED 4,4 REVIEW OF PROCUREMENT DOCUMENTS FOR ITEMS AND SERVICES OTHER THAN SPARE PARTS r Applies to all FPL issued purchase orders and contracts relating to a nuclear power plant, except those originated by operating plant personnel.

4.5 PROCUREMENT

OF SAFETY RELATED AND QUALITY RELATED ELECTRICAL EQUIPMENT Provides a system to assure appropriate technical and qu requirements are placed on s'ers of electrical equipment ear plants...p I C 0 Z Ol Ol E 0 e I u)'p TOPICAL QUALITY ASSURANCE REPORT Rev, APPENDIX E 10 LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE Date May 10.1 Page 5 of 11 P NUMBER TITLE SECTION DESCRIPTION 5.1 OPERATING PLANT PROCEDURES Describes measures which ensure that instructions and procedures used in operating plants are identified, prepared, reviewed, approved, issued and revised in accordance with regulatory and FPL requirements. 5.2 BACKFZT PROCEDURES Describes the generation, review and control of backfit procedures. 6.1 CONTROL OF CONSTRUCTION PROJECT CONTRACTOR DRAWINGS, SPECIFICATIONS p AND PROCEDURES Defines responsibilities and methods for the control and issue of contractor drawings, specifications and procedures to be used during the construction phase of nuclear power plants.0 Vl C 0 Z 0I N s 0 IL 6.2 CONTROL OF DOCUMENTS ISSUED BY 6.3 CANCELLED 6.4 CANCELLED 6.5 CANCELLED 6.6 DRAWING CONTROL FOR OPERATING NUCLEAR POWER PLANTS Instructions are provided for controlling documents issued by FPL which prescribe activities affecting the quality of safety related items.gag g)CJJ~c.".;~g~~q<g'\Describes the method to be used for controlling and updating nuclear safety related drawings for operating plants after turnover from the design organization. <$r zqr~Pg', V',g Hl P 1),t I Y TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE APPENDIX E RBV.10 May 10, 1988 6 of ll P NUMBER TITLE SECTION DESCRIPTION 6.7 CONTROL OF VENDOR MANUALS AND VENDOR TECHNICAL INFORMATION 7.1 RECEIPT INSPECTION OF MATERIALS, PARTS AND COMPONENTS P~v s'(TED 7.2 CANCELLED 7.3 CANCELLED Il 7.4 EVALUATION OF SUPPLIERS OF SAFETY RELATED ITEMS OR SERVICES 7.5 CANCELLED Establishes requirements for controlling technical manuals for operating, maintenance and test e'quipment. Provides instructions for receipt inspection of materials, parts and components which have been obtained for use in nuclear safety applica-tions at the operating plant Provides standards, e s~e's~and guidelines for the eval itin of QA Programs of contractors or suppliers supplying items or services.7.6 ACCEPTANCE OF ITEMS 6 SERVICES 7.8 REVIEW AND DISPOSITION OF SUPPLIER DEVIATION NOTICES Describes the responsibilities and requirements for accepting nuclear safety related items or services that are being procured for nuclear power plants.Describes the responsibilities and requirements for the review and disposition of nonconformances identified within a supplier's facility which have resulted or will result in an item which does not fully comply with the FPL procurement document quality and technical requirements. This procedure applies to purchased items which have not yet been shipped. 'f 1"15 zt A I TOPICAL QUALITY ASSKULNCE REPORT Rev, APPENDIX E 10 LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE May 10, 1988 of SECTION DES(2tIPTION 7.9 CONTROL OF ON-SITE VENDOR , SERVICES This procedure provides a system to assure that vendors who provide on-site services by contract or purchase order to FPL at nuclear power plants are controlled.

8.1 IDENTZFICATION

6 CONTROL OF MATERIALS, PARTS, COMPONENTS AT THE PLANT SITE Delineates measures for assuring'traceability, identification and, control of items from the time they are received through usage at operating plants.8.2 CANCELLED 9.1 CONTROL OF SPECIAL PROCESSES Delineates the responsibilities of organizations'nd personnel, and the control and documentation of special processes that are applied to safety related items.9.2 CANCELLED (Combined with 9.1)9e4 CONTROL OF WELDING FOR NUCLEAR POWER PLANTS 10.1 CANCELLED Delineates responsibilitie~ and'.requirements for control-F&L welding;processes t aran'pOeer plahrs.as s e s~oseI lO cs O 0 Vl C 0 2 Oi~e cv E 0 4 I TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E 10 LIST OP CORPORATE QUALITY ASSURANCE PROCEDURE Date Nay 10, 1gSS Page 8 of SECTION DESCK~ION 10.2 CANCELLED 10.3 INSPECTION AND SURVEILLANCE 10.4 CANCELLED Delineates responsibilities and requirements for the inspection and surveillance of safety related plant maintenance activities, operation of safety related systems, and fuel handling activities. 10.5 CANCELLED t 10.6 CANCELLED 11.1 CANCELLED (Combined with 11.4)11.2 CANCELLED (Combined with 11.4)11.3 CANCELLED (Combined with 11.4)~,]+0 L~~'Pp'g" O~11.4 TEST CONTROL Defines the measures for control of proof test prior to installation, construction tests, preoperational tests, startup tests, operational tests and retests following repairs, replacements or modifi-cations for nuclear safety related systems, structures, and components. C 0 z O N E 0 Ql)'4 p1 TOPICAL QUALITY ASSURANCE REPORT LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE APPENDIX E Rev.10 Date May 10 1gSS Pe 9 Of P NUMBER TITLE SECTION DESCEG:PTION 12.1 CALIBRATION AND CONTROL OF MEASURING AND TEST EQUIPMENT Delineates the responsibilities for implementing the described program for maintenance, calibration and control of measuring and test equipment (MGTE).12.2 CALIBRATION CONTROL OF INSTALLED PLANT INSTRUMENTATION AND CONTROL EQUIPMENT 13.1 HANDLING, STORAGE AND SHIPPING OF MATERIALS, PARTS AND COMPONENTS 13.2 CANCELLED 13.3 Describes the calibration program, delineates responsibilities, and establishes procedures for control over the calibration of installed instrumentation and plant control equipment. Establishes responsibilities and procedures to assure that measures are employed by FPL and contractors to: (1)control the handling, shipping and storage of material;(2)protect the quality of material~by using proper handling, shippin~'" and storage techniques -<<(3'P3>>.effectively control t sporsition'f discrepant item.~!I f ID sO CII 0 C 0 Z Cll OI E 0 C!.C~~cc~Q~~4b ad Cd&B.l)14.1 AND OPE C.a,~s e(<~0f~!MCSS!~H.5)is s c ze an con ro e respec ve STATUS 'l7 4>>l I>>>>IP>>~'>>i77 TOPICAL QUALITY ASKRUZCE REPORT Rev.APPENDIX E 10 LIST OF CORPORATE QUALITY ASSURANCE PROCEDURE Date May 10, 19SS pege 10 Of 1 1 SECTION DESCRIPTION 14.2 op zation.Defines the objectives and PARTS OR responsibilities for controlling nonconforming items or services in order to prevent their inadvertent use, installation or application to operating nuclear power plants.Establishes the respective responsibilities of FPL personnel and the procedure for assuring that conditions identified by the FPL QA Department as being adverse quality, are corrected. ~I i.xj\*ge 16.2 CANCELLED (Combined with 16.1)16.3 CANCELLED (Combined with 16.1)~re.(leg (c.on k:n.e4~i++, i4 3)pl 15.1 CANCELLED (Combined with 15.2)1S.2 CONTROL OF NONCONFORMING MATERIALS, PARTS, COMPONENTS AND SERVICES CORRECTIVE ACTION ID~0 N 16.4 EVALUATING AND REPORTING OF NONCOMPLIANCES FOR SUBSTANTIAL SAFETY HAZARDS IN ACCORDANCE WITH 10 CFR PART 21 Specifies the measures and DEFECTS 6 responsibilities within Florida Power 6 Light to assure compliance to 10 CFR Part 21.C 0 Z Ol N s 0 'A a.'C TOPICAL QUALITY ASSURANCE REPORT Rev.APPENDIX E 10 LIST OP CORPORATE QUALITY ASSme~d P)mZDURE May 10, 1988 P NUMBER TITLE SECTION DESC5HPTION 16.6 CANCELLED 17.1 THE COLLECTION AND STORAGE OF QUALITY ASSURANCE RECORDS FOR NUCLEAR POWER PLANTS 18.1 CONDUCT OF QUALITY ASSURANCE AUDITS Identifies records and documents required to substantiate quality;and, describes measures employed for their maintenance, retention and retrieval. Provides instructions for conducting audits of FPL Quality Assurance Program activities. 18.2 CANCELLED 18.3 CANCELLED 18.4 CANCELLED IO (il O C 0 lh (0 Z Ol ci(E 0 I(.e a~~P~+(D;'p-p(~mes'(((((Je opa~~e~~q((g(g(s p~m(o)656Le~ ~i~%~~~)LksEJ'~S (esp~xi fn (i f(idMi Ac>'p (~>p~~~(~,%san a-~~[~a+>,sgs~a.a ("~~~. t ,4}}