ML081830500
ML081830500 | |
Person / Time | |
---|---|
Site: | Monticello ![]() |
Issue date: | 06/26/2008 |
From: | O'Connor T J Nuclear Management Co |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
L-MT-08-034 | |
Download: ML081830500 (47) | |
Text
NMC> Monticello Nuclear Generatina Plant Commitfed to NWr ExceIlence Operated by Nuclear Management Company, LLC June 26,2008 L-MT-08-034 10 CFR 50.90 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 Monticello Nuclear Generating Plant Docket 50-263 Renewed Facility Operating License No.
DPR-22 License Amendment Request: Revision to Required Actions for Specification 3.5.1, Emerqencv Core Coolinq Svstem Pursuant to 10 CFR 50.90, the Nuclear Management Company, LLC (NMC) proposes to revise the Required Actions for Technical Specification 3.5.1, "Emergency Core Cooling System (ECCS) and Reactor Core Isolation Cooling (RCIC) System, ECCS - Operating,"within the Monticello Nuclear Generating Plant (MNGP) Technical Specifications (TS) to more accurately reflect the assumptions of the MNGP Loss of Coolant Accident (LOCA) accident analysis.
Based upon the ECCS single failure analysis for the MNGP, applying deterministic considerations and licensing precedents, it is proposed to revise the existing Conditions and Required Actions and add several new actions (and associated Completion Times) to Specification 3.5.1 to address inoperability of selected combinations of low pressure ECCS subsystems for which Required Actions are not presently specified. Enclosure 1 provides a description of the proposed changes and includes the technical evaluation and associated no significant hazards determination and environmental evaluation. Enclosure 2 provides a marked-up copy of the TS pages showing the proposed changes. Enclosure 3 provides a copy of the associated draft marked-up TS Bases pages for information.
The NMC requests approval of the proposed license amendment by one year from the date of submittal, with an implementation period of 90 days. The MNGP Plant Operations Review Committee has reviewed this application. In accordance with 10 CFR 50.91, a copy of this application, with enclosures, is being provided to the designated Minnesota Official. 2807 West County Road 75 Monticello, Minnesota 55362-9637 Telephone:
763.295.5151 a Fax: 763.295.1454 Document Control Desk Page 2 Summaw of Commitments This letter proposes no new commitments or revises any existing commitments.
I declare under penalty of perjury that the foregoing is true and correct. President, Monticello Nuclear Generating Plant Nuclear Management Company, LLC Enclosures (3) cc: Administrator, Region Ill, USNRC Project Manager, Monticello, USNRC Resident Inspector, Monticello, USNRC Minnesota Department of Commerce TABLE OF CONTENTS LICENSE AMENDMENT REQUEST REVISION TO REQUIRED ACTIONS FOR SPECIFICATION 3.5.1 EMERGENCY CORE COOLING SYSTEM SECTION TITLE
1.0 INTRODUCTION
2.0 BACKGROUND
3.0 DESCRIPTION
OF THE PROPOSED CHANGES
4.0 DESCRIPTION
OF THE EMERGENCY CORE COOLING SYSTEM 5.0 TECHNICAL ANALYSIS 5.1 Inconsistency Between the Required Actions for the ESW System Specification and the ECCS Specification 5.2 Grouping of BWR Plants by Pertinent ECCS Characteristics 5.3 Review of the Dresden 2 and 3 and Quad Cities 1 and 2 ECCS Specifications 5.4 Review of the Duane Arnold ECCS Specification 5.5 Review of the Limerick ECCS Specification 5.6 MNGP Updated Safety Analysis Report Accident Analysis Assumptions 5.7 Review of ITS Development 5.8 Application of These Considerations to the MNGP ECCS Technical Specification Required Actions 6.0 REGULATORY ANALYSIS 6.1 No Significant Hazards Determination 6.2 Applicable Regulatory Requirements 7.0 ENVIRONMENTAL EVALUATION 24
8.0 REFERENCES
25 Page 1 of 1 ENCLOSURE I DESCRIPTION OF CHANGE LICENSE AMENDMENT REQUEST REVISION TO REQUIRED ACTIONS FOR SPECIFICATION 3.5.1 EMERGENCY CORE COOLING SYSTEM I .O INTRODUCTION Pursuant to 10 CFR 50.90, the Nuclear Management Company, LLC (NMC) proposes to revise the Required Actions for Technical Specification 3.5.1, "Emergency Core Cooling System (ECCS) and Reactor Core Isolation Cooling (RCIC) System, ECCS - Operating," within the Monticello Nuclear Generating Plant (MNGP) Technical Specifications (TS) to more accurately reflect the assumptions of the MNGP Loss of Coolant Accident (LOCA) accident analysis. Based upon the ECCS single failure analysis for the MNGP, applying deterministic considerations and licensing precedents, it is proposed to revise the existing Conditions and Required Actions and to add several new actions (and associated Completion Times) to Specification 3.5.1 to address inoperability of selected combinations of low pressure ECCS subsystems for which Required Actions are not presently specified.(') These Required Actions address conditions where the following combinations of low pressure ECCS injectionlspray subsystems are inoperable:
- 1. Two entire Low Pressure Coolant Injection (LPCI) subsystems inoperable.
- 2. One Core Spray subsystem and one LPCI subsystem (or one or two LPCI pumps) inoperable.
- 3. Both Core Spray subsystems inoperable. The General Electric SAFERIGESTR set of computer codes (Reference 1) are the evaluation model used for the MNGP licensing basis LOCA analysis.
The ECCS-LOCA analysis (References 2 and 3) performed for the MNGP assumed single failures that are more limiting than those reflected within the existing MNGP TS. Therefore, the NMC proposes to revise Specification 3.5.1 to more fully reflect the assumptions of the single failure analysis, consistent with the U.S. Nuclear Regulatory Commission (NRC) approved TS for several other Boiling Water Reactors (BWRs). This approach is also consistent with the single failure assumption applied for the Pressurized Water Reactor (PWR) standard technical specification (STS) NUREGs. 1. The proposed Conditions, Required Actions and Completion Times have been previously approved by the NRC for several other BWRs with ECCS configurations that are consistent with the MNGP ECCS configuration. Page 1 of 26 ENCLOSURE I 2.0 BACKGROUND At the MNGP, there are two independent ECCS Room Coolers (one for each low pressure ECCS division) providing cooling to the low pressure ECCS equipment. Each ECCS Room Cooler is located in the respective division's Residual Heat Removal (RHR) / Core Spray Corner Room in the Reactor Building. Each low pressure ECCS division consists of one RHR subsystem, with two RHR pumps lined up in the LPCl mode, and a Core Spray subsystem, containing one Core Spray pump. The Emergency Service Water (ESW) System consists of two independent subsystems each taking supply from the ultimate heat sink (UHS) providing cooling water to the ECCS Room Coolers, among other loads. Condition A of Specification 3.7.2, "Emergency Service Water (ESW) System and Ultimate Heat Sink (UHS)," provides a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time for restoration to OPERABLE status when one ESW subsystem is inoperable.
ECCS Room Cooler Events Resulting In Operational Challenqes On July 2, 2007, during quarterly ESW pump and valve surveillance testing, a low flow condition was identified to the "A RHR 1 Core Spray Pump Room resulting in inadequate flow to the Division I ECCS Room Cooler. The inoperability of the Division I ECCS Room Cooler resulted in the simultaneous inoperability of the "A and "C" RHR pump loops (one LPCl subsystem) and the "A Core Spray subsystem due to the inability to provide adequate room cooling. With two low pressure ECCS subsystems inoperable, Specification 3.5.1, "Emergency Core Cooling System (ECCS) and Reactor Core Isolation Cooling System (RCIC)," Action M, directed entry into Limiting Condition for Operation (LCO) 3.0.3 requiring commencement of a plant shutdown. This event was reported in Licensee Event Report (LER) 2007-04 (Reference 4). On August 20, 2007, during Control Room panel walkdowns an Operator discovered that the indicating light for the Division II ECCS Room Cooler was not lit. It was determined that the Division II ECCS Room Cooler supply breaker would not function.
On December 11, 2007, the Division I ECCS Room Cooler failed to start due to a blown fuse. Each of these room cooler inoperability events resulted in declaration of the respective division's RHR pumps (one LPCl subsystem) and associated Core Spray subsystem being declared inoperable resulting in entry into LC0 3.0.3 in accordance with TS.(*) These events illustrate the vulnerability of the unit to a required shutdown due to the current TS requirements based on inoperability of an ECCS Room Cooler.
- 2. In each of these cases, the problem was able to be resolved within the Completion Time and the unit was not taken offline. Review of the December 11, 2007, event identified that the unit was within the single failure analysis and consequently not in an unanalyzed condition.
Page 2 of 26 ENCLOSURE I
3.0 DESCRIPTION
OF THE PROPOSED CHANGES Review of the MNGP ECCS single failure analysis indicates that one entire low pressure ECCS division was assumed inoperable as part of the MNGP ECCS LOCA analysis, although this combination of low pressure ECCS injectionlspray subsystems out-of-service was not included within the Required Actions of Specification 3.5.1.
An action such as this would allow maintenance and restoration of an inoperable ECCS Room Cooler, precluding the need for an unwarranted reactor shutdown with the associated risk.
The MNGP is of the BWRl3 design. Several BWRs with the same ECCS complement (BWW3 and BWW4 GE(~) product lines) have 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Times for restoration of an inoperable low pressure ECCS division. Also, the PWR STS provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time for the restoration of an entire ECCS train to OPERABLE status. This allowance to have up to one division of low pressure ECCS equipment out-of-service for up to 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> was approved for the Duane Arnold Energy Center (DAEC) as part of their Improved STS (ITS) conversion (Reference 5). Further review identified that the Fermi TS and Limerick TS (based on the "old" STS) also include this allowance to have one division of low pressure ECCS equipment out-of-service for up to 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The DAEC, Fermi and Limerick units are of the BWW4 design, with the same complement of ECCS systems, as the MNGP . During the MNGP ITS conversion, the MNGP requested to change the TS to allow the combination of two full LPCl subsystems to be inoperable. That request was not included in the approved ITS amendment as it was considered by the NRC as a Beyond-Scope Change. It was indicated that this change could be submitted later as a separate technical change. This proposed change has been previously approved by the NRC for Dresden Units 2 and 3 and Quad Cities 1 and 2. Each of these units is of the BWRl3 design, with the same complement of ECCS systems as the MNGP. Also, it was recognized during review of the MNGP ECCS single failure analysis that adding a new Condition F to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when both Core Spray subsystems are inoperable was worthwhile. This allowance was approved for the DAEC as part of the ITS conversion. These actions with 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Times have been previously approved by the NRC for plants with the same complement of ECCS systems as the MNGP, are within the constraints of the MNGP ECCS single failure analysis, are standard for the PWRs, and hence are conservative and have been previously demonstrated acceptable. Based upon the single failure analysis associated with the MNGP LOCA analysis, it is proposed to revise and add the following Required Actions (and associated Completion Times) to Specification 3.5.1, "Emergency Core Cooling System, ECCS - Operating" to more fully reflect the Conditions (assumptions) of the ECCS analysis and design basis.
- 3. Section 5.2 discusses the pertinent ECCS characteristics that apply to the BWW3 and BWW4 GE product lines.
Page 3 of 26 ENCLOSURE I The following changes are proposed: Revise existing Condition D to apply to two entire LPCl subsystems being inoperable. Currently, the Condition applies when two LPCl subsystems are inoperable due to inoperable injection paths. Add a new Condition E to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when one Core Spray subsystem and one LPCl subsystem (or one or two LPCl pump(s) (may be in the same LPCl or opposite LPCl subsystems)) are inoperable. Add a new Condition F to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when both Core Spray subsystems are inoperable. Re-designate the Conditions and Required Actions (starting at existing letter E) to reflect the insertion of new Conditions E and F. Note that there are no changes to the technical content of the actions, only the letter of the designators are being revised to reflect the insertions. The major revised actions 1 changes to the applicable portions of the Specification 3.5.1 Actions table are shown below.(4) The table also provides a reference to other BWR's NRC approved TS which contain the same Conditions, Required Actions and Completion Times.
Action CONDITION 1 REQUIRED ACTION 1 COMPLETION 1 OTHER TIME BWR's D. Two LPCl subsystems inoperable
&&e for-reasons other than Condition
.--------..--....-.----------...
C or Condition H. .-----.....-.....--------.
D.l Restore one LPCl subsystem to .---.... -----.- OPERABLE status.
72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 4. Additions are shown by dotted underlining or revision bars, and deletions by strikeout.
Page 4 of 26 ENCLOSURE I CONDITION E. One Core Spray subsystem inoperable. One LPCl subsystem inoperable.
OR - One or two LPCl pump(s) inoperable.
F. Both Core Spray subsystems inoperable. REQUIRED ACTION E. 1 Restore Core Spray subsystem to OPERABLE status. E.2 Restore LPCl subsystem to OPERABLE status. E.3 Restore LPCl pump(s) to OPERABLE status.
F. 1 Restore one Core Spray subsystem to OPERABLE status. G. Required Action and . . . associated Completion Time of Condition A, B, C, w D,-E-orE.
not met. G.l Be in MODE 3. .....- AND G.2 Be in MODE 4. ....-- OTHER BWR's TS (MNGP 1 Existing)
Changes to the remaining Conditions and Required Actions reflect insertion of the new conditions (see mark-up). A full mark-up of the proposed changes to the Conditions, Required Actions and Completion Times table for Specification 3.5.1 is provided in Enclosure
- 2. Enclosure 3 provides a copy of the associated draft TS Bases pages. The Bases changes will be issued in accordance with Specification 5.5.9, "Technical Specification TS Bases Control Program," following approval of this LAR.
4.0 DESCRIPTION
OF THE EMERGENCY CORE COOLING SYSTEM The MNGP emergency core cooling system network consists of the following: High Pressure Coolant lnjection (HPCI), Automatic Depressurization System (ADS), Core Spray (CS), and Low Pressure Coolant lnjection (LPCI), (an operating mode of RHR). Page 5 of 26 ENCLOSURE I (The other operating modes of RHR include shutdown cooling, containment spray and suppression pool cooling, and supplemental fuel pool cooling.)
The ECCS subsystems are designed to limit clad temperature over the complete spectrum of possible break sizes in the nuclear system process barrier, including the design basis break. The design basis break is defined as the complete and sudden circumferential rupture of the largest pipe connected to the reactor vessel (i.e., one of the recirculation loop pipelines) with displacement of the ends so that blowdown occurs from both ends.
A simplified diagram showing the Monticello ECCS flow paths(5) is provided below. DIESEL GENERATOR A DIESEL GENERATOR RECIRC. PUMP A RECIRC. PUMP B 5. The Reactor Core Isolation Cooling (RCIC) System flowpath is also shown, but it is not a credited ECCS.
Page 6 of 26 ENCLOSURE I High Pressure Coolant Injection The High Pressure Coolant Injection (HPCI) System consists of a steam driven turbine pump unit, piping, and valves to provide steam to the turbine, as well as piping and valves to transfer water from the suction source to the core via the feedwater system line, where the coolant is distributed within the reactor pressure vessel (RPV) through the feedwater sparger.
Pump suction for HPCl is normally aligned to the condensate storage tanks (CSTs) to minimize injection of suppression pool water into the RPV.
However, if the water level in the CSTs are low, or if the suppression pool level is high, an automatic transfer to the suppression pool water source ensures a water supply for continuous operation of the HPCl System. The steam supply to the HPCl turbine is piped from a main steam line upstream of the associated inboard main steam isolation valve. The HPCl System is designed to provide core cooling for a wide range of reactor pressures (150 psig to 1120 psig). Exhaust steam from the HPCl turbine is discharged to the suppression pool. Automatic Depressurization Svstem The Automatic Depressurization System (ADS) consists of three of the eight safetylrelief valves (SIRVs). It is designed to provide depressurization of the reactor coolant system (RCS) during a small break LOCA if HPCl fails or is unable to maintain required water level in the RPV. ADS operation reduces the RPV pressure to within the operating pressure range of the low pressure ECCS subsystems (CS and LPCI), so that these subsystems can provide coolant inventory makeup.
Core Sprav Two independent loops are provided as a part of the Core Spray (CS) System. Each loop consists of one 100 percent-capacity centrifugal pump driven by an electric motor, a spray sparger in the reactor vessel above the core, piping and valves to convey water from the suppression pool to the sparger, and the associated controls and instrumentation.
In the case of low-low water level in the reactor vessel plus low reactor vessel pressure, or high pressure in the drywell, or low-low reactor water level sustained for 20 minutes, the CS System, when reactor vessel pressure is low enough, automatically sprays water onto the top of the fuel assemblies at a sufficient flow rate to cool the core and limit fuel cladding temperature. (LPCI starts from the same signals and operates independently to achieve the same objective by flooding the reactor vessel). The CS System can provide protection to the core for the largest break in the reactor pressure boundary (the double-ended recirculation line break). The CS System, after ADS has operated to lower reactor vessel pressure provides coolant to the core for small breaks in the reactor pressure boundary for which the control rod drive water pumps, RCIC, and HPCl are all unable to maintain the reactor vessel water level.
Page 7 of 26 ENCLOSURE 1 Low Pressure Coolant lniection Low Pressure Coolant Injection (LPCI) is an operating mode of RHR. There are two LPCl subsystems, each consisting of two motor driven pumps, piping and valves that transfer water from the suppression pool to the reactor vessel through the corresponding recirculation loop. LPCl operates to restore and maintain the coolant inventory in the reactor vessel after a loss-of-coolant accident so that the core is sufficiently cooled to preclude fuel clad temperatures in excess of 2200°F and subsequent energy release due to a metal-water reaction. The LPCl subsystem operates in conjunction with HPCI, ADS, and the CS System to achieve this goal. HPCl is a high-head system and pumps water into the reactor vessel when the nuclear system is at high pressure. If HPCl fails to maintain the required level of water in the reactor vessel, the automatic depressurization feature of the Nuclear System Pressure Relief System functions to reduce nuclear system pressure so that LPCl operates to inject water into the pressure vessel. LPCl is a low-head, high-flow subsystem.
All these operations are carried out automatically. LPCl is designed to reflood the reactor vessel to at least two-thirds core height and to maintain this level. After the core has been flooded to this height, the capacity of one RHR pump (in the LPCl mode) is more than sufficient to maintain level. During LPCl operation, the pumps take suction from the pressure suppression pool and discharge to the reactor vessel into the core region through the selected recirculation loop. Operation of the LPCl loop select logic results in the LPCl pump discharge into the unbroken recirculation loop.
Any spillage through a break in the lines within the primary containment returns to the pressure suppression pool through the pressure suppression vent lines. 5.0 TECHNICAL ANALYSIS A review of the TS versus the ECCS single failure analysis for the MNGP indicated that allowable combinations of low pressure ECCS equipment out-of-service were not included within the Required Actions to the ECCS Specification, i.e., Specification 3.5.1 in the MNGP TS. Various equipment out-of-service allowances including two LPCl subsystems inoperable, one Core Spray subsystem inoperable and one LPCl subsystem (or one or two LPCl pump(s)) inoperable, or both Core Spray subsystems inoperable, have been previously approved by the NRC for various plants, solely or in combination, with a Completion Time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The plants are listed below. Dresden Units 2 and 3 Quad Cities Unit 1 and 2 Limerick Unit 1 Fermi Unit 2 Duane Arnold Page 8 of 26 ENCLOSURE I These units are of the BWRM and BWRl4 designs, with the same complement of ECCS systems, as the MNGP. The PWR STSs provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time for restoring an entire ECCS train@) to OPERABLE status. Based upon the MNGP single failure analysis, existing precedents within the PWR STS NUREGs and several BWRl3 and BWRl4 plant TSs, it is proposed to revise the Required Actions in Specification 3.5.1, based upon purely deterministic considerations, to address the following situations. The changed7) proposed to the Required Actions (and associated Completion Times) of Specification 3.5.1 are: Revise existing Condition D to apply to two entire LPCl subsystems being inoperable. Condition D currently applies to inoperable injection paths. Add a new Condition E to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when one Core Spray subsystem and one LPCl subsystem (i.e., a low pressure ECCS division), (or one or two LPCl pump(s) (may be in the same LPCl or opposite LPCl subsystems)) are inoperable. Add a new Condition F to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when both Core Spray subsystems are inoperable. Each LPCl subsystem consists of a common suction line from the suppression pool, parallel flowpaths through the two RHR pumps, and a common injection line to the reactor pressure vessel. An inoperable "LPCI pump" refers to the condition where inoperable components associated with the flowpath through one of the two parallel RHR pumps renders that LPCl pump flowpath inoperable, but the common portions of the associated LPCl subsystem remain OPERABLE. For this condition the LPCl function can still be performed by the remaining OPERABLE LPCl pump in the associated LPCl subsystem. The TS Bases to Specification 3.5.1 have been revised to clarify this concept, so that it is clear that the Required Actions apply to the inoperable components associated with a LPCl pump flowpath rather than just a LPCl pump. Note that an inoperable component in the common LPCl subsystem sections would result in the entire LPCl subsystem being declared inoperable. These proposed changes have been previously approved by the NRC for plants with the same complement of ECCS as the MNGP, are consistent with the MNGP ECCS single failure analysis and consistent with the philosophy of the STS for PWRs. -- - - 6. A PWR ECCS train generally consists of high pressure and low pressure injection pumps supplied from offsite power backed-up by an emergency diesel generator (EDG). Loss of an EDG for a BWRl3 or 4 results in the loss of a single low pressure ECCS injectionlspray division (the steam driven High Pressure Coolant Injection System is still available to provide high pressure ECCS injection).
- 7. Additional changes to re-label the existing Conditions and Required Actions to reflect the insertion of the new Required Actions and provide clarification where no action exists are shown in the marked-up TS in Enclosure
- 2. Page 9 of 26 ENCLOSURE I 5.1 Inconsistency Between the Required Actions for the ESW System Specification and the ECCS Specification The MNGP ECCS components of Specification 3.5.1 are served by several support systems. There is an inconsistency between the Completion Time allowed for one subsystem of the Emergency Service Water (ESW) System being inoperable (i.e., 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />) and the Completion Time allowed for a division of low pressure ECCS injectionispray subsystems being inoperable, as described below. This section discusses the discrepancy and the impact on plant operations. Several of the following sections discuss proposed TS changes (and supporting analyses) which remedy this situation.
Emerqencv Service Water - Specification 3.7.2 The MNGP ESW System provides a safety-related source of cooling water for removal of heat from safety-related equipment; including the RHR pumps motor thrust bearingd8), the Core Spray pumps motor thrust bearings, and the ECCS Room Coolers. Each ECCS Room Cooler provides area cooling to its associated division of ECCS equipment. The ESW System consists of two independent subsystems each taking supply from the ultimate heat sink (UHS). In accordance with Condition A of Specification 3.7.2, "Emergency Service Water (ESW) System and Ultimate Heat Sink (UHS)," a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time is provided for restoration when one ESW subsystem is inoperable. Two of the components served by ESW are the RHRiCore Spray Room Coolers (V-AC-4 and V-AC-5), referred to as the ECCS room coolers.
At the MNGP there are two ECCS room coolers, one for each low pressure ECCS division. Cooling water to each ECCS room cooler is supplied by the ESW subsystem associated with that ECCS division.
When the required cooling flow can not be supplied to the ECCS room cooler due to a problem with its ESW subsystem (resulting in the inability to cool the RHR 1 Core Spray Pump Room) 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> is allowed to restore the ESW subsystem to OPERABLE status in accordance with Condition A of Specification 3.7.2.
CONDITION A. One ESW subsystem inoperable. - - 8. Two of the four RHR pump motor upper bearings, one in each ECCS division, were replaced with models that do not require cooling water.
Page 10 of 26 REQUIRED ACTION A.l Restore the ESW subsystem to OPERABLE status. COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> ENCLOSURE I Conversely, when there is a problem with an ECCS room cooler (having the same result - the inability to cool the RHR I Core Spray Pump Room) the Required Actions for Specification 3.5.1 direct LC0 3.0.3 entry via Condition M, requiring a plant shutdown and the unit to be in Mode 4 in 37 hours4.282407e-4 days <br />0.0103 hours <br />6.117725e-5 weeks <br />1.40785e-5 months <br />. 5.2 Grouping of BWR Plants by Pertinent ECCS Characteristics BWR plant designs have evolved over time resulting in changes to the RHR and Core Spray Systems. Nonetheless, the design changes have been generally evolutionary or reflect design options. For example, in the Core Spray subsystems, two half-capacity pumps instead of one full capacity pump have sometimes been utilized in a subsystem to provide the required flow. Table 2.1 (see next page) from page 2-2 of NUREGICR-5268, (Reference 6), illustrates six groupings developed for a study of BWR RHR System designs. The most common configuration is the two RHR subsystem (loop) design, with two RHR pumps per subsystem and one or two heat exchangers for each subsystem. Note that for all GE designs when utilized for ECCS operation the RHR pumps are put in a specific lineup referred to as the LPCI injection mode. As can be seen, grouping plants by RHR System characteristics indicates that DAEC, Fermi, Dresden, Quad Cities and Monticello plants have the same general ECCS RHR System design (Group 1). The Group 1 design has two RHR (LPCI) pumps per subsystem (loop) with two RHR (LPCI injection) subsystems and one RHR heat exchanger per s~bs~stern.(~)(~~)('~) Note that Limerick is in Group 3 and Dresden 2 and 3 are in Group 5. The Limerick and Hope Creek (late BWW4 designs) evolved to independent injection lines from the common injection line design associated with the BWRl3 and earlier BWW4 designs. - 9. The difference between Groups 1 and 2 is that Group 2 has two RHR heat exchangers per RHR Subsystem.
- 10. Group 3 retained the one RHR heat exchanger per division of Group 1, but instead of having two LPCI subsystems (with two LPCI injection pumps per subsystem), each LPCI pump was a stand alone subsystem with separate injection paths.
- 11. The BWW5 and BWWG RHR System designs are contained in Group 4. Page 11 of 26 ENCLOSURE I GROUP 1 Table 2.1 Grouping of Plants by RHR System Characteristics
@R SYSTEM GHARACTERISTIQ Arnold Loops: 2 Brunswick 1 & 2 Pumps : 2 Per Loop Cooper HX's: 1 Per Loop Fermi 2 Fitzpatrick Hatch 1 & 2 Monticello Pilgrim Quad Cities 1 & 2 Shoreham Susquehanna 1 & 2 Browns Ferry 1. 2 & 3 Loops: 2 Peach Bottom 2 & 3 Pumps: 2 Per Loop HX's: 2 Per Loop Hope Creek Limerick HX's: 2 Total Clinton Grand Gulf 1 & 2 La Salle 1 & 2 Nine Nile Point 2 Perry River Bend WP2 Dresden 2 & 3 Millstone 1 6 Nine Mile Point 1 Oyster Creek Loops: 4 Pumps: 4 Total Loops: 3 Pumps: 3 Total HX's: 2 Total Separate LPCI/SDC Systems SDC Loops: 2 LPCI Loops: 2 SDC Pumps: 2 LPCI Pumps: 4 SDC HX's: 2 LPCI HX's: 2* No LPCI System SDC Loops: 3 SDC Pumps: 3 SDC HX's: 3
- LPCI HX's used for containment cooling only. For the BWW3 and BWW4 Core Spray System designs there are two different configurations. There is one configuration with each subsystem containing one Core Spray pump and a second configuration with each subsystem containing two half capacity pumps. Page 12 of 26 ENCLOSURE I 5.3 Review of the Dresden 2 and 3 and Quad Cities I and 2 ECCS Specifications The Dresden Units 2 and 3 Specification 3.5.1, "Emergency Core Cooling System (ECCS) and Isolation Condenser (IC) System, ECCS - Operating," and the Quad Cities Units 1 and 2 Specification 3.5.1, "Emergency Core Cooling System (ECCS) and Reactor Core Isolation Cooling System (RCIC), ECCS - Operating," both indicate Required Action D as stated below. This condition correlates to Condition D within the MNGP TS. The section entitled "Additional TS Changes and Beyond-Scope Items" in the Dresden Units 2 and 3 NRC Safety Evaluation (SE) (Reference
- 7) and the Quad Cities Units 1 and 2 NRC SE (Reference
- 8) approved the incorporation of the above Required Action into the TS for each unit during the conversion of each unit to ITS. An excerpt from that section of each SE (identical wording for Dresden and Quad Cities) is provided below. (Emphasis added by underlining certain items.) CONDITION D. Two LPCl subsystems inoperable for reasons other than Condition c.' More Restrictive Shutdown Requirements for LPCl Inop. (ITS 3.5.1. DOC M.l) [custom TS] CTS 3.5.A.2 defines the LPCl subsystem as being comprised of four LPCl pumps and a flow path capable of taking suction from the suppression chamber and transferring the water to the reactor vessel. ITS 3.5.1 will define two LPCl subsystems, each consisting of two motor driven pumps, piping, and valves capable of transferring water from the suppression pool to the RPV via the "selected" recirculation loop. CTS 3.5.A Action 2.b, which allows the entire LPCl System to be inoperable for 7 days, has been modified to allow only one LPCl subsystem to be inoperable (ITS 3.5.1, Condition B) or one LPCl pump in each LPCl subsystem to be inoperable (ITS 3.5.1 Condition C) for 7 days, or both LPCl subsvstems to be inoperable for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> (ITS 3.5.1 Action Dl. These changes represent additional restrictions on plant operation. The staff finds these changes to be acceptable. REQUIRED ACTION D. 1 Restore one LPCl subsystem to OPERABLE status.
The NRC approved changes for Dresden Units 2 and 3 and Quad Cities Units 1 and 2 allow two entire LPCl subsystems to be out-of-service for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. As COMPLETION TIME 72-h-oou~sS
- 12. Condition C allows one LPCl pump in each subsystem to be inoperable for 7 days. Page 13 of 26 ENCLOSURE I indicated previously, the Dresden and Quad Cities units are of the BWRl3 design, with the same complement of ECCS systems, as the MNGP. Therefore, the changes proposed by the NMC for the MNGP are consistent with the changes previously approved by the NRC for Dresden and Quad Cities during their ITS conversions and are applicable to the MNGP. 5.4 Review of the Duane Arnold ECCS Specification On May 22, 1998, Amendment Number 223 (Reference
As stated in the cover letter to the amendment, this "amendment also revised the TS requirements for the combinations of emergency core cooling systems I subsystems that may be out of service". The pertinent revised Required Actions for the DAEC Specification 3.5.1, "Emergency Core Cooling System (ECCS) and Reactor Core Isolation Cooling System (RCIC), ECCS - Operating," after approval are shown below.(13) These conditions correlate to proposed Conditions E and F within the MNGP TS. Section G, "Evaluation of Other TS Changes Included in the Application for Conversion to Improved Technical Specifications," in the NRC SE for the DAEC ITS conversion provides the NRC evaluation of the ECCS conditions shown above. An excerpt from that section of the SE (pages 51 and 52) is provided below. (Emphasis has been added by underlining certain subjects.)
CONDITION C. One Core Spray subsystem inoperable.
AND One or two RHR pump(s) inoperable.
D. Both Core Spray subsystems inoperable.
The NRC staff has concluded that, because the licensee used NRC approved ECCS analvsis codes and methods, the following changes to the CTS are acceptable. These changes take credit for the lower flow rates found adequate in the computer calculations for ECCS systems (SAFER1 -- -- 13. One Core Spray subsystem together with one LPCl subsystem out-of-service for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> was approved by the NRC for Fermi in Amendment No.
134. REQUIRED ACTION C.l Restore Core Spray subsystem to OPERABLE status. - OR C.2 Restore RHR pump(s) to OPERABLE status.
D. 1 Restore one Core Spray subsystem to OPERABLE status. Page 14 of 26 COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 72 hours 72 -~-O-L!JS, ENCLOSURE I GESTR, approved June 1, 1984 in a letter from C. Thomas (NRC) to J.Quirk (GE)) as well as the combinations of ECCS equipment found adequate to meet 10 CFR 50, Appendix K, requirements. Detailed discussions of the individual changes falling in this category are provided below. L2. ITS 3.5.1 action C establishes required actions and completion times for the situation when one Core Sprav subsvstem and one or two RHR [LPCI) pump(s) are inoperable. ITS 3.5.1 is less restrictive than CTS 3.5.A.4, which allows one RHR pump to be inoperable for 30 days, and CTS 3.5.A.5, which allows two RHR pumps (i.e., the LPCI subsystem) to be inoperable for up to 7 days, provided the remaining RHR (LPCI) active components, both Core Spray subsystems, the Containment Spray subsystem, and the DGs are verified to be operable. The CTS does not allow one Core Spray subsystem and one or two RHR pump(s) to be inoperable at the same time. The LOCA analvsis, conducted in accordance with an approved methodologv and presented in NEDC-3131 OP, (Duane Arnold Energy Center SAFERIGESTR-LOCA Loss-of-Coolant Accident Analysis, pursuant to DAEC License Amendment
- 142, dated May 7, 1987), indicates that an adequate level of protection is provided bv the remaining operable ECCS subsvstems in this condition. The accident analysis also demonstrates that, in this condition, the peak clad temperature remains below the regulatory limit.
However, another single failure may place the plant in a condition where adequate core cooling may not be available during a design basis LOCA. Therefore, a completion time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> has been established to either restore the inoperable Core Sprav subsvstem or the inoperable RHR pump(s). ITS 3.5.1 action D establishes required actions and completion times for the situation when two Core Sprav (CS) subsvstems are inoperable. ITS 3.5.1 is less restrictive than CTS 3.5.A.2, which allows only one Core Spray subsystem to be inoperable. CTS 3.5.A.6 would require the plant to be in Hot Shutdown within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> and Cold Shutdown within the following 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> if both Core Spray subsystems were inoperable. With two CS subsvstems inoperable, the LOCA analvsis presented in NEDC-3131 OP, (Duane Arnold Energy Center SAFERIGESTR-LOCA Loss-of-Coolant Accident Analysis), indicates that the remaining operable low pressure ECCS subsvstem (LPCI) with all four RHR pumps operable (onlv 3 of which are required), provides adequate protection. However, another single failure may place the plant in a condition where adequate core cooling mav not be available during a design basis LOCA. Therefore, a completion time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> has been established to restore one Core Spray subsvstem to operable status.
Page 15 of 26 ENCLOSURE 1 The NRC approved changes for the DAEC and Fermi units to allow one division of low-pressure ECCS equipment to be out-of-service for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The approved change allows one or two RHR pump(s) in the LPCl mode in either ECCS division to be inoperable for the DAEC for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. In summary, this flexibility, consistent with the DAEC and Fermi units ECCS accident analysis allows either one entire LPCl subsystem, or two RHR pump LPCl flowpaths to be inoperable for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. This DAEC TS change also allowed both Core Spray subsystems('4) to be inoperable for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. As indicated previously, the DAEC and Fermi units are of the BWRl4 design, with the same complement of ECCS systems, as the MNGP. The changes proposed by the NMC for the MNGP are consistent with changes previously approved by the NRC for DAEC and Fermi, and hence previously determined acceptable.
5.5 Review of the Limerick ECCS Specification This change, to allow one division of low pressure ECCS equipment to be out-of- service for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> is included within the Limerick TS. The Limerick units are of the late BWRl4 design, with a similar complement of ECCS systems, as the MNGP. As described in the LC0 to Specification 314.5.1, "ECCS - OPERATING,
for Limerick Unit 1, the pertinent low pressure ECCS are defined as: 3/4.5.1 ECCS - OPEtATItJrJ 3.5.1 The emergency cczc ccr~ling systems s3ail be OWSABLE with: a. :he core spray syscen {CSS) canslsting of two subsystems with each sT&systms cmprxsed of: I. Two OPE-LZ CS pumps, and 2. An CPEFGELE Zi~w patch capable of taking suction from the suppresslon chamber an& transferzing the water through the spray spargez to che reactor vessel. b. 3e iew pressure coolant rn]ectlon (LPCI) system of the residual heac, re~aval system consrstlng of four subsystems with each subs ysta comprised of: 1. One OPEWLL :PC1 pmp, and 2. Etn C?-3 flvd path capable of raking suction from the sllppressron chamber an& transferring the water to the reactor vessel. 14. The MNGP custom TS until 1991 included a 7-day allowable out-of-service time for both Core Spray subsystems inoperable (Reference 9). Page 16 of 26 ENCLOSURE I Limerick has two Core Spray subsystems and four LPCl subsystems.
As stated in the Actions to Limerick, Unit 1, Specification 314.5.1, b. for the LPCl system:
- 4. Hith two LPCZ subsystexs
- noperable, provided that at least one CSS subsystem IS O?EZIZBLE, zestore at least :bet LFCL subsystems to CPWE statzs i;~zhln ? days or bt in at least HOT SHUT^* wnthrn the next 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> and In COLD SHbTD&'N within the folla%iny 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. 5. With three LPCZ subsysterrs
- noperable, provnded that both CSS subsystctms art O?ER&BLE, restore az leasz two LPCZ subsystems to UERABLE status wlthnn 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> oz be In at least HOT SHUTWR@? withln the next 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> an8 In C3LD SHCTCOtri vrthin the follmlng 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. Limerick Action b.4 provides a 7 day period (Completion Time) to restore one LPCl subsystem to OPERABLE (from an initial condition of one Core Spray subsystem inoperable and two LPCl subsystems inoperable), in other words one low pressure ECCS division out-of-service. This condition correlates to proposed Condition E within the MNGP TS. Limerick Action b.5 provides a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> period (Completion Time) to restore two LPCl subsystems to OPERABLE (from an initial condition of three LPCl subsystems inoperable). The Limerick units are of the late BWRl4 design, with a similar complement of ECCS systems, as the MNGP. Therefore, the changes proposed by the NMC for the MNGP are in compliance with changes previously approved by the NRC for the Limerick units and hence previously demonstrated acceptable.
5.6 MNGP Updated Safety Analysis Report Accident Analysis Assumptions The General Electric SAFERIGESTR set of computer codes (Reference
- 1) are the evaluation model used for ECCS LOCA licensing basis analysis for the MNGP. The ECCS-LOCA analysis (References 2 and
- 3) was performed assuming the single failures presented in Updated Safety Analysis Report (USAR) Table 14.7-1
- 1. All of these situations are bounded by the existing single failure analysis assumptions within the LOCA accident analysis, however these assumptions are not fully reflected within the MNGP TS. The Required Actions of Specification 3.5.1 are proposed to be revised and new Conditions added (along with the associated Completion Times) to address the above situations which were evaluated as part of the original single failure analysis.
USAR Section 14.7.2.3.2, "Single Failure Considerations," states:
In order to determine the acceptability of the response to a LOCA, the most limiting combination of break size, location, and single failure must be determined. The single failures that are considered must reflect any failure of an ECCS component or support system which might be postulated to occur Page 17 of 26 ENCLOSURE I during a LOCA.
The component failures typically considered for BWR-3 plants are listed below:
An emergency diesel generator A [Direct Current]
DC power source (Battery)
A LPCl injection valve The HPCl System An ADS valve The single failure in the analysis is considered in conjunction with the unavailability of offsite power. The ECC Systems remaining available following a single failure are shown in [USAR] Table 14.7-1
One specific DC power source failure (Item 2) can disable the HPCl System and one emergency diesel generator. This failure results in ADS, one Core Spray subsystem and two RHR pumps in the LPCl injection mode remaining available. A modified(15)
USAR Table 14.7-1 1 is provided below: Table 14.7-1 1 Single Failures and Available Svstems Break Assumed Single Systems Remaininq TS 3.5.1 Location ~ailure(l~)
~vailable('~)
Condition 1. Recirc Suction None 2 CS + 4 LPCl + HPCl + ADS 2. Recirc Suction DC Power 1 CS
+ 2 LPCl + ADS E. 3. Recirc Suction Diesel Generator 1 CS
+ 2 LPCl + HPCl + ADS E. 4. Recirc Suction LPCl Injection 2 CS + HPCl + ADS D. Valve 5. Recirc Suction HPCl System 2 CS
+ 4 LPCl + ADS 6. Core S ray (1 8P DC Power 2 LPCl + ADS Line 15. A column indicating which proposed Specification 3.5.1 out-of-service Condition applies to a particular break and the limiting single failure was added. 16. Other postulated failures are not specifically considered because they all result in at least as much ECCS capacity as one of the above assumed failures.
- 17. Systems remaining, as identified in this table, are applicable to all non-ECCS line breaks. For a LOCA from an ECCS line break, the systems remaining are those listed, less the ECCS system in which the break is assumed.
- 18. The Core Spray Line failure is shown for illustration and also because proposed Condition F applies. Page 18 of 26 ENCLOSURE I Break Location Assumed Sinqle Svstems Remaininq
~ailure('~)
~vailable(")
TS 3.5.1 Condition
- 7. Feedwater Line DC Power 1 CS + 2 LPCl + ADS 8. Steamline DC Power 1 CS + 2 LPCl + ADS The limiting licensing basis event is the design basis accident (DBA) recirculation suction line break LOCA. As can be seen for the bounding cases analyzed, with the various limiting single failures assumed, proposed Condition D (which would result in both LPCl subsystems being inoperable, i.e., 4 LPCl inoperable) and Condition E (which would result in one Core Spray subsystem and one LPCl subsystem (or one or two LPCl pump(s)) being inoperable, i.e., 1 CS + 2 LPCl inoperable) results in the systems shown above remaining available for LOCA response.
For the non-limiting Core Spray line break LOCA, with the limiting single failure of a loss of DC Power assumed, proposed Condition F (which would result in one LPCl subsystem, both Core Spray subsystems and the HPCl System being inoperable, i.e., 2 LPCl + 2 CS + HPCl inoperable) results in the systems shown above remaining available for LOCA response.
As indicated above, a review of USAR Table 14.7-1 1 indicates that the proposed TS changes and the resulting equipment out-of-service combinations are all within the bounds of the existing MNGP ECCS single failure analysis. Also as discussed previously, Completion Times for each of these combinations have been established and approved by the NRC previously for other BWRs. A Completion Time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> has been determined to be acceptable by the NRC for these ECCS out-of-service configurations, by the licensing precedents previously discussed. Since plants currently with this specification have the same complement of ECCS and design, these previously approved ECCS out-of-service I single failure combinations and Completion Times are also applicable to the MNGP. 5.7 Review of ITS Development The TS reflect a conservative representation of the accident analysis. A review of Specification 3.5.1 for the Monticello, and the BWW4 and BWW6 STS (NUREG-1433 and NUREG-1434 respectively), indicated that the Monticello ITS wording was standard (both for the Required Action and the associated Bases). A review of other BWR technical specifications indicated that most plants did not credit in their TS some of the systems I subsystems available (out-of-service combinations) based upon the single failure considerations in their accident analyses. While it can not be established why this appears to be the case, it is Page 19 of 26 ENCLOSURE 1 worth noting that the PWR STS do appear to provide Required Actions to reflect ECCS trains (or equipment) out-of-service to the defined limits of their accident analyses. This condition did not originate with ITS as the conversions generally carry over the existing ECCS equipment combination analysis from the prior standard or custom TS. A discussion with one of the lead developers of the Monticello ITS who was involved with the development of the original ITS BWR NUREGs indicated that the disconnect between BWR ECCS single failure analysis and TS allowances was recognized during development of the original ITS NUREGs by the involved industry/NRC/and Excel personnel but was not pursued.
5.8 Application of These Considerations to the MNGP ECCS Technical Specification Required Actions Based upon a review of the MNGP ECCS single failure analysis and the other considerations discussed previously, it has been demonstrated that the following combinations of low pressure ECCS equipment out-of-service are acceptable for the MNGP and meet the licensing constraints of the LOCA analysis. Also, it has been determined that the following combinations of out-of-service have been reflected in NRC approved TS Required Actions (and associated Completion Times) for other BWR units of the same ECCS complement as the MNGP. Revise existing Condition D to apply to two entire LPCl subsystems being inoperable. Add a new Condition E to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when one Core Spray subsystem and one LPCl subsystem (or one or two LPCl pump(s) (may be in the same LPCl or opposite LPCl subsystems)) are inoperable. Add a new Condition F to provide a 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time when both Core Spray subsystems are inoperable. There are no inherent differences between the ECCS design at the MNGP and these other plants which would preclude application of these Required Actions and Completion Times at the MNGP. As previously described, the NRC staff has concluded that because these licensees used NRC approved ECCS analysis codes and methods, that these changes were acceptable. These TS changes took credit for the combinations of ECCS equipment found adequate to meet 10 CFR 50, Appendix K, requirements.
Based upon purely deterministic considerations, the MNGP ECCS LOCA analysis and the associated single failure analysis, and existing licensing precedents for other BWR plants, it is appropriate to apply these Required Actions and Completion Times at the MNGP. Page 20 of 26
~~ ~~ -~ ~~ ~ - - ~~
ENCLOSURE I 6.0 REGULATORY ANALYSIS 6.1 No Significant Hazards Determination In accordance with the requirements of 10 CFR 50.90, the Nuclear Management Company, LLC (NMC) requests an amendment to facility Renewed Operating License DPR-22, for the Monticello Nuclear Generating Plant (MNGP) to revise Specification 3.5.1. The NMC has evaluated the proposed amendment in accordance with 10 CFR 50.91 against the standards in 10 CFR 50.92 and has determined that the operation of the MNGP in accordance with the proposed amendment presents no significant hazards.
NMC1s evaluation against each of the criteria in 10 CFR 50.92 follows.
- 1. Does the proposed amendment involve a significant increase in the probability or consequences of an accident previously evaluated? Response: No.
The low pressure Emergency Core Cooling System (ECCS) subsystems are designed to inject to reflood or to spray the core after any size break up to and including a design basis Loss of Coolant Accident (LOCA). The proposed changes to the Required Actions and associated Completion Times do not change the conditions, operating configurations, or minimum amount of operating equipment assumed in the safety analysis for accident mitigation.
No changes are proposed to the manner in which the ECCS provides plant protection or which would create new modes of plant operation. The proposed changes will not affect the probability of any event initiators. There will be no degradation in the performance of, or an increase in the number of challenges imposed on, safety related equipment assumed to function during an accident situation. There will be no change to normal plant operating parameters or accident mitigation performance. Therefore, the proposed changes do not involve a significant increase in the probability or consequences of an accident previously evaluated.
Page 21 of 26 p~ ~ ----
ENCLOSURE I 2. Does the proposed amendment create the possibility of a new or different kind of accident from any accident previously evaluated?
Response:
No. There are no hardware changes nor are there any changes in the method by which any plant systems perform a safety function. This request does not affect the normal method of plant operation. The proposed changes do not introduce new equipment, which could create a new or different kind of accident.
No new external threats, release pathways, or equipment failure modes are created. No new accident scenarios, transient precursors, failure mechanisms, or limiting single failures are introduced as a result of this request. Therefore, the implementation of the proposed changes will not create a possibility for an accident of a new or different type than those previously evaluated.
- 3. Does the proposed amendment involve a significant reduction in a margin of safety? Response: No. The ECCS are designed with sufficient redundancy such that a division of low pressure ECCS may be removed from service for maintenance or testing. The remaining subsystems are capable of providing water and removing heat loads to satisfy the Updated Safety Analysis Report requirements for accident mitigation or unit safe shutdown. There will be no change to the manner in which the safety limits or limiting safety system settings are determined nor will there be any change to those plant systems necessary to assure the accomplishment of protection functions. There will be no change to post-LOCA peak clad temperatures. For these reasons, the proposed amendment does not involve a significant reduction in a margin of safety. Based on the above, the NMC has determined that operation of the facility in accordance with the proposed change does not involve a significant hazards consideration as defined in 10 CFR 50.92(c), in that it does not:
(1) involve a significant increase in the probability or consequences of an accident previously evaluated; or (2) create the possibility of a new or different kind of accident from any accident previously evaluated; or (3) involve a significant reduction in a margin of safety. Page 22 of 26 ENCLOSURE I 6.2 Applicable Regulatory Requirements 10 CFR 50.36, "Technical specifications," provides the regulatory requirements for the content required in the Technical Specifications (TSs). As stated in 10 CFR 50.36, the TSs will include Surveillance Requirements (SRs) to assure that the limiting conditions for operation (LCO) (and associated remedial actions) are met. The MNGP was designed largely before the publishing of the 70 General Design Criteria (GDC) for Nuclear Power Plant Construction Permits proposed by the Atomic Energy Commission (AEC) for public comment in July 1967, and constructed prior to the 1971 publication of Appendix A, "General Design Criteria for Nuclear Power Plants", to 10 CFR Part 50. As such, the MNGP was not licensed to the Appendix A, General Design Criteria (GDC). The MNGP USAR, Section 1.2, lists the principal design criteria for the design, construction and operation of the plant.
USAR Appendix E provides a plant comparative evaluation to the 70 proposed AEC design criteria. It was concluded that the plant conforms to the intent of the 70 proposed GDCs.
The applicable GDCs and proposed GDCs are discussed below.
GDC Criterion 35 - Emergency core cooling. A system to provide abundant emergency core cooling shall be provided. The system safety function shall be to transfer heat from the reactor core following any loss of reactor coolant at a rate such that (I) fuel and clad damage that could interfere with continued effective core cooling is prevented and (2) clad metal-water reaction is limited to negligible amounts. Suitable redundancy in components and features, and suitable interconnections, leak detection, isolation, and containment capabilities shall be provided to assure that for onsite electric power system operation (assuming offsite power is not available) and for offsite electric power system operation (assuming onsite power is not available) the system safety function can be accomplished, assuming a single failure.
Proposed GDC Criterion 38 - Reliability and Testability of Engineered Safely Features All engineered safety features shall be designed to provide high functional reliability and ready testability.
In determining the suitability of a facility for proposed site, the degree of reliance upon and acceptance of the inherent and engineered safety afforded by the systems, including engineered safety features, will be influenced by the known and the demonstrated performance capability and reliability of the systems, and by the extent to which the Page 23 of 26 ENCLOSURE I operability of such systems can be tested and inspected where appropriate during the life of the plant.('g)
NMC has evaluated the proposed changes against the applicable regulatory requirements and acceptance criteria. The technical analysis concludes that the proposed changes will continue to assure that the design requirements and acceptance criteria of MNGP ECCS LOCA analysis and single failure analysis are met. Based on this, there is reasonable assurance that the health and safety of the public, following approval of this change, is unaffected.
- 19. PDC Criterion 38 corresponds approximately to 10 CFR 50, Appendix A, GDC Criterion 37 - Testing of emergency core cooling system.
Page 24 of 26 ENCLOSURE 1 7.0 ENVIRONMENTAL EVALUATION NMC has determined that the proposed amendment would not change a requirement with respect to installation or use of a facility or component located within the restricted area, as defined in 10 CFR 20, nor would it change an inspection or surveillance requirement. The proposed amendment does not involve (i) a significant hazards consideration, or (ii) authorize a significant change in the types or a significant increase in the amounts of any effluent that may be released offsite, or (iii) result in a significant increase in individual or cumulative occupational radiation exposure. Accordingly, the proposed amendment meets the eligibility criterion for a categorical exclusion set forth in 10 CFR 51.22(~)(9).
Therefore, NMC concludes pursuant to 10 CFR 51.22(b), no environmental impact statement or environmental assessment need be prepared in connection with the proposed amendment. Page 25 of 26 ENCLOSURE 1 REFERENCES
- 1. NRC letter (C. 0. Thomas) to GE (J. F.
Quirk), Acceptance for Referencing of Licensing Topical Report NEDE-23785P, Revision 1, Volume Ill (P), "The GESTR-LOCA and SAFER Models for the Evaluation of the Loss-of-Flow Accident," June 1, 1984. 2. GE Nuclear Energy, NEDC-32514P, Revision 1, "Monticello Nuclear Generating Plant SAFERIGESTR-LOCA Loss-of-Coolant Accident Analysis," dated October 1997.
- 3. GE Nuclear Energy, GE-NE-J1103878-09-02P, "Monticello ECCS-LOCA Evaluation for GE14," August 2001. 4. Letter NMC to NRC, Licensee Event Report (LER) 2007-04, "Degradation of Emergency Service Water Flow to Emergency Core Cooling System Room Cooler," (L-MT-07-060) dated August 30.
2007. 5. NRC letter (C. 0. Thomas) to DAEC (J. F. Quirk), Amendment No. 223 to Facility Operating License No. DPR-49, Duane Arnold Energy Center (TAC No.
M97197), dated May 22, 1998.
- 6. NUREGICR-5268, "Aging Study of Boiling Water Reactor Residual Heat Removal System," prepared for the U.S. NRC by the Brookhaven National Laboratory (BNL-NUREG--2177), published June 1989.
- 7. NRC letter (S. N. Bailey) to Exelon (0. D. Kingsley), "Issuance of Amendments (TAC Nos. MA8382 and MA8383)," dated March 30,2001. 8. NRC letter (S. N. Bailey) to Exelon (0. D. Kingsley), "Issuance of Amendments (TAC Nos. MA8378 and MA8379)," dated March 30,2001. 9. NRC letter (W.
M79653), dated April 9, 1991. Page 26 of 26 ENCLOSURE 2 MONTICELLO NUCLEAR GENERATING PLANT MARKED-UP PROPOSED TECHNICAL SPECIFICATION CHANGES LICENSE AMENDMENT REQUEST REVISION TO REQUIRED ACTIONS FOR SPECIFICATION 3.5.1 EMERGENCY CORE COOLING SYSTEM (5 pages follow)
ECCS - Operating 3.5.1 3.5 EMERGENCY CORE COOLING SYSTEM (ECCS) AND REACTOR CORE ISOLATION COOLING SYSTEM (RCIC) 3.5.1 ECCS - Operating LC0 3.5.1 Each ECCS injectionlspray subsystem and the Automatic Depressurization System (ADS) function of three safetylrelief valves shall be OPERABLE.
NOTE Low pressure coolant injection (LPCI) subsystems may be considered OPERABLE during alignment and operation for decay heat removal with reactor steam dome pressure less than the Residual Heat Removal (RHR) shutdown cooling supply isolation interlock in MODE 3, if capable of being manually realigned and not otherwise inoperable.
..................................................................................................
APPLICABILITY:
MODE I, MODES 2 and 3, except high pressure coolant injection (HPCI) and ADS valves are not required to be OPERABLE with reactor steam dome pressure I 150 psig.
ACTIONS ----------------------------------------OTE
...........................................................
LC0 3.0.4.b is not applicable to HPCI. Monticello CONDITION A. One LPCl pump inoperable.
B. One LPCl subsystem inoperable for reasons other than Condition A. OR - One Core Spray subsystem inoperable.
Amendment No. 146 REQUIRED ACTION A.l Restore LPCl pump to OPERABLE status.
B.l Restore low pressure ECCS injectionlspray subsystem to OPERABLE status. COMPLETION TIME 30 days 7 days ECCS - Operating 3.5.1 ACTIONS (continued)
CONDITION C. One LPCl pump in both LPCl subsystems inoperable. D. Two LPCl subsystems inoperable
&+&Y o+JI er tk~n Ce*tt%~fi C8 C ,i! Required Action and associated Completion Time of Condition A, B, C, e+ D,,not met. *r F )r x. Two LPCl subsystems inoperable due to open RHR intertie return line isolation valve(s).
X &. Required Action and associated Completion Time of Condition j? not met. H J H. HPCl System inoperable.
REQUIRED ACTION C.l Restore one LPCl pump to OPERABLE status.
D.l Restore one LPCI- A *to OPERABLE status.
I Be in MODE
- 3. AND - 2.2 Be in MODE
- 4. 4 I Isolate the RHR intertie line. L 6.1 Be in MODE 2. s yl. 1 Verify by administrative means RClC System is OPERABLE.
AND 3- H.2 Restore HPCl System to OPERABLE status.
COMPLETION TIME 7 days 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 12 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> 18 hours I 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Immediately 14 days Monticello Amendment No.
W6-Specification 3.5.1 - ECCS Required Actions Action INSERT A CONDITION E. One Core Spray subsystem inoperable. REQUIRED ACTION COMPLETION One LPCl subsystem inoperable.
One or two LPCl pump(s) inoperable.
E. 1 Restore Core Spray subsystem to OPERABLE status. E.2 Restore LPCl subsystem to OPERABLE status. E.3 Restore LPCl pump(s) to OPERABLE status. 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 72 hours 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> -....-..-----.-..
F. Both Core Spray subsystems inoperable.
Page 3.5.1-2 Insert F. 1 Restore one Core Spray subsystem to OPERABLE status.
ECCS - Operating 3.5.1 I( // HPCl System ACTIONS (continued)
/ $1 Restore HPCl System to 1 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> CONDITION inoperable.
I - OPERABLE status.
I AND - REQUIRED ACTION Condition A, B, or C entered. COMPLETION TIME L ,d' One ADS valve inoperable.
I( 1 d2 Restore low pressure ECCS injectionlspray subsystem(s) to OPERABLE status. 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 21 Restore ADS valve to OPERABLE status.
Condition A, B, or C entered. 14 days I M ,K One ADS valve inoperable.
OR - M jC2 Restore low pressure ECCS injectionlspray subsystem(s) to OPERABLE status. 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 1 Restore ADS valve to OPERABLE status. Iv x. Required Action and associated Completion Time of Condition*
J, 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> f 9~ K#ot met. Two or more ADS valves inoperable.
HPCl System or one or more ADS valves inoperable and Condition D a+ El f, r entered. N Y. ' Be in MODE 3. EI g.2 Reduce reactor steam dome pressure to 1 150 psig. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 36 hours Monticello 3.5.1-3 Amendment No. ++*I-ECCS - Operating 3.5.1 ACTIONS (continued)
CONDITION 0 pX Two or more low pressure ECCS injectionlspray subsystems inoperable for reasons other than Condition C, D, er-F;: E9 f HPCl System and one or more ADS valves inoperable.
REQUIRED ACTION COMPLETION TIME 6 M.1 Enter LC0 3.0.3. Immediately SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.5.1.1 Verify, for each low pressure ECCS injectionlspray subsystem, the piping is filled with water from the pump discharge valve to the injection valve. SR 3.5.1.2 Verify each ECCS injectionlspray subsystem manual, power operated, and automatic valve in the flow path, that is not locked, sealed, or otherwise secured in position, is in the correct position.
SR 3.5.1.3 Verify ADS pneumatic pressure is as follows for each required ADS pneumatic supply:
- a. SIRV Accumulator Bank header pressure 2 88.3 psig; and
- b. Alternate Nitrogen System pressure is 1 41 0 psig. FREQUENCY 31 days 31 days 31 days Monticello Amendment No. %,*
ENCLOSURE 3 MONTICELLO NUCLEAR GENERATING PLANT DRAFT TECHNICAL SPECIFICATION BASES PAGES (FOR INFORMATION)
LICENSE AMENDMENT REQUEST REVISION TO REQUIRED ACTIONS FOR SPECIFICATION 3.5.1 EMERGENCY CORE COOLING SYSTEM (1 1 pages follow)
ECCS - Operating 3.5.1 B 3.5 EMERGENCY CORE COOLING SYSTEM (ECCS) AND REACTOR CORE ISOLATION COOLING (RCIC) SYSTEM B 3.5.1 ECCS - Operating BASES BACKGROUND The ECCS is designed, in conjunction with the primary and secondary containment, to limit the release of radioactive materials to the environment following a loss of coolant accident (LOCA). The ECCS uses two independent methods (flooding and spraying) to cool the core during a LOCA. The ECCS network consists of the High Pressure Coolant Injection (HPCI) System, the Core Spray (CS) System, the low pressure coolant injection (LPCI) mode of the Residual Heat Removal (RHR) System, and the Automatic Depressurization System (ADS). The suppression pool provides the required source of water for the ECCS. Although no credit is taken in the safety analyses for the condensate storage tanks (CSTs), they are capable of providing a source of water for the HPCI, LPCI, and CS Systems. On receipt of an initiation signal, ECCS pumps automatically start and the system aligns and the pumps inject water, taken either from the CSTs or suppression pool, into the Reactor Coolant System (RCS) as RCS pressure is overcome by the discharge pressure of the ECCS pumps. Although the system is initiated, ADS action is delayed, allowing the operator to interrupt the timed sequence if the system is not needed. The HPCl pump discharge pressure almost immediately exceeds that of the RCS, and the pump injects coolant into the vessel to cool the core. If the break is small, the HPCl System will maintain coolant inventory as well as vessel level while the RCS is still pressurized. If HPCl fails, it is backed up by ADS in combination with LPCI and CS. In this event, the ADS timed sequence would be allowed to time out and open the selected safetylrelief valves (SIRVs) depressurizing the RCS, thus allowing the LPCI and CS to overcome RCS pressure and inject coolant into the vessel. If the break is large, RCS pressure initially drops rapidly and the LPCI and CS cool the core. Water from the break returns to the suppression pool where it is used again and again. Water in the suppression pool is circulated through a heat exchanger cooled by the RHR Service Water System. Depending on the location and size of the break, portions of the ECCS may be ineffective; however, the overall design is effective in cooling the core regardless of the size or location of the piping break. The combined operation of all ECCS subsystems are designed to ensure that no single active component failure will prevent automatic initiation and successful operation of the minimum required ECCS equipment.
Monticello B 3.5.1-1 Revision No. -
ECCS - Operating 3.5.1 BASES BACKGROUND (continued)
The CS System (Ref. 1) is composed of two independent subsystems. Each subsystem consists of a motor driven pump, a spray sparger above the core, and piping and valves to transfer water from the suppression pool to the sparger.
The CS System is designed to provide cooling to the reactor core when reactor pressure is low. Upon receipt of an initiation signal, the CS pumps in both subsystems are automatically started in approximately 15 seconds after AC power is available.
When the RPV pressure drops sufficiently, CS System flow to the RPV begins. A full flow test line is provided to route water from and to the suppression pool to allow testing of the CS System without spraying water in the RPV. LPCl is an independent operating mode of the RHR System. There are two LPCl subsystems (Ref. 2), each consisting of two motor driven pumps in the same RHR loop and piping and valves to transfer water from the suppression pool to the RPV via the selected recirculation loop.
qzh LPCl subsystem consists of a common suction line from the suppression pool, parallel flowpaths through the two RHR pumps, and a common injection line to the RPV. An inoperable "LPCI pump" refers to the condition where inoperable components associated with the flowpath through one of the two parallel RHR pumps renders that LPCl pump flowpath inoperable, but the common portions of the associated LPCl subsystem are OPERABLE.
--- The LPCl System is equipped with a loop select logic that determines which, if any, of the recirculation loops has been broken and selects the non-broken loop for injection. If neither loop is determined to be broken, a preselected loop is used for injection. The LPCl System cross-tie valve must be open to support OPERABILITY of both LPCl subsystems. Similarly, the LPCl swing bus, consisting of two motor control centers which are directly connected together, is required to be energized from the Division 1 power supply (normal source), with automatic transfer capability to the Division 2 power supply (backup source) to support both LPCl subsystems.
The LPCl subsystems are designed to provide core cooling at low RPV pressure. Upon receipt of an initiation signal, all four LPCl pumps are automatically started (pumps A and B approximately 5 seconds after AC power is available and pumps C and D approximately 10 seconds after AC power is available). RHR System valves in the LPCl flow path are automatically positioned to ensure the proper flow path for water from the suppression pool to inject into the selected recirculation loop. When the RPV pressure drops sufficiently, the LPCl flow to the RPV, via the selected recirculation loop, begins.
The water then enters the reactor through the jet pumps. Full flow test lines are provided for each LPCl subsystem to route water from and to the suppression pool, to allow testing of the LPCl pumps without injecting water into the RPV. These test lines also provide suppression pool cooling capability, as described in LC0 3.6.2.3, "RHR Suppression Pool Cooling." An intertie Monticello B 3.5.1-2 Revision No. -
ECCS - Operating 3.5.1 BASES BACKGROUND (continued) line is provided to connect the RHR shutdown cooling suction line with the two RHR shutdown cooling loop return lines to the associated recirculation loop. This line includes two RHR intertie return line isolation valves that are normally closed and a RHR intertie suction line isolation valve that is normally open. The purpose of this line is to reduce the potential for water hammer in the recirculation and RHR systems.
The isolation valves are opened during a cooldown to establish recirculation flow through the RHR suction line and return lines, thereby ensuring a uniform cooldown of this piping. The RHR intertie loop return line isolation valves receive a closure signal on LPCl initiation.
In the event of an inoperable RHR intertie loop return line isolation valve, there is a potential for some of the LPCl flow to be diverted to the broken loop during a LOCA. This may cause early transition boiling during a LOCA. The RHR intertie line flow is not permitted in MODE 1 to eliminate the need to compensate for the small change in jet pump drive flow and a reduction in core flow during a loss of coolant accident. The HPCl System (Ref. 3) consists of a steam driven turbine pump unit, piping, and valves to provide steam to the turbine, as well as piping and valves to transfer water from the suction source to the core via the feedwater system line, where the coolant is distributed within the RPV through the feedwater sparger. Suction piping for the system is provided from the CSTs and the suppression pool. Pump suction for HPCl is normally aligned to the CSTs to minimize injection of suppression pool water into the RPV. However, if the water level in any CST is low, or if the suppression pool level is high, an automatic transfer to the suppression pool water source ensures a water supply for continuous operation of the HPCl System. The steam supply to the HPCl turbine is piped from a main steam line upstream of the associated inboard main steam isolation valve. The HPCl System is designed to provide core cooling for a wide range of reactor pressures (150 psig to 1120 psig). Upon receipt of an initiation signal, the HPCl turbine stop valve and turbine steam supply valve open and the turbine accelerates to a specified speed. As the HPCl flow increases, the turbine governor valve is automatically adjusted to maintain design flow. Exhaust steam from the HPCl turbine is discharged to the suppression pool. A full flow test line is provided to route water from and to the CSTs to allow testing of the HPCl System during normal operation without injecting water into the RPV. The ECCS pumps are provided with minimum flow bypass lines, which discharge to the suppression pool. The valves in these lines automatically open or remain open to prevent pump damage due to overheating when other discharge line valves are closed. To ensure rapid delivery of water to the RPV and to minimize water hammer effects, Monticello B 3.5.1-3 Revision No. -
ECCS - Operating 3.5.1 BASES BACKGROUND (continued) all ECCS pump discharge lines are filled with water.
The LPCI and CS System discharge lines are kept full of water using a "keep fill" system (Condensate Service System). The HPCl System is normally aligned to the CSTs. The height of water in the CSTs is sufficient to maintain the piping full of water up to the first closed isolation valve in the discharge piping. The relative height of the feedwater line connection for HPCl is such that the water in the feedwater lines keeps the remaining portion of the HPCl discharge line full of water. Therefore, HPCl does not require a "keep fill" system. The ADS (Ref.
- 4) consists of three of the eight SIRVs. It is designed to provide depressurization of the RCS during a small break LOCA if HPCl fails or is unable to maintain required water level in the RPV. ADS operation reduces the RPV pressure to within the operating pressure range of the low pressure ECCS subsystems (CS and LPCI), so that these subsystems can provide coolant inventory makeup.
The ADS valves are normally supplied by the lnstrument Nitrogen System.
This pneumatic supply will automatically transfer to the lnstrument Air System on high or low lnstrument Nitrogen System pressure. However, both of these pneumatic supplies are non-safety related and are not assumed to operate following an accident. The safety grade pneumatic supply to two of the ADS valves is the Alternate Nitrogen System and to the third ADS valve is the SIRV Accumulator bank. The Alternate Nitrogen System contains two independent trains (i.e., subsystems) of safety related replaceable gas cylinders that supply two of the three ADS valves (SIRVs A and C). One Alternate Nitrogen System train supplies one ADS valve and other non-ADS related pneumatic loads and the other Alternate Nitrogen System train supplies a different ADS valve and other non-ADS related pneumatic loads. The SIRV Accumulator Bank supplies the third ADS valve (SIRV D), and consists of a dedicated safety related backup accumulator bank and an associated inlet check valve.
APPLICABLE The ECCS performance is evaluated for the entire spectrum of break SAFETY sizes for a postulated LOCA. The accidents for which ECCS operation is ANALYSES required are presented in References 5 and 6. The required analyses and assumptions are defined in Reference
- 7. The results of these analyses are also described in References 5 and
- 6. This LC0 helps to ensure that the following acceptance criteria for the ECCS (Ref.
8), established by 10 CFR 50.46 (Ref.
9), will be met following a LOCA, assuming the worst case single active component failure in the ECCS:
- a. Maximum fuel element cladding temperature is 5 2200°F; b. Maximum cladding oxidation is 5 0.17"times the total cladding thickness before oxidation; Monticello Revision No. -
ECCS - Operating 3.5.1 BASES APPLICABLE SAFETY ANALYSES (continued)
- c. Maximum hydrogen generation from a zirconium water reaction is 5 0.01 times the hypothetical amount that would be generated if all of the metal in the cladding surrounding the fuel, excluding the cladding surrounding the plenum volume, were to react; d. The core is maintained in a coolable geometry; and
- e. Adequate long term cooling capability is maintained. The limiting single failures are discussed in Reference 10. For a large discharge pipe break LOCA, failure of the LPCl valve on the unbroken recirculation loop is considered the most limiting breaklfailure combination. For a small break LOCA, HPCl failure is the most severe failure. One ADS valve is assumed to fail for events requiring ADS operation. The remaining OPERABLE ECCS subsystems provide the capability to adequately cool the core and prevent excessive fuel damage. The ECCS satisfy Criterion 3 of 10 CFR 50.36(c)(2)(ii). Each ECCS injectionlspray subsystem and three ADS valves are required to be OPERABLE. The ECCS injectionlspray subsystems are defined as the two CS subsystems, the two LPCl subsystems, and one HPCl System. The low pressure ECCS injectionlspray subsystems are defined as the two CS subsystems and the two LPCl subsystems. With less than the required number of ECCS subsystems OPERABLE, the potential exists that during a limiting design basis LOCA concurrent with the worst case single failure, the limits specified in Reference 9 could be exceeded. All ECCS subsystems must therefore be OPERABLE to satisfy the single failure criterion required by Reference
- 9. As noted, LPCl subsystems may be considered OPERABLE during alignment and operation for decay heat removal when below the actual RHR shutdown cooling supply isolation interlock in MODE 3, if capable of being manually realigned (remote or local) to the LPCl mode and not otherwise inoperable. Alignment and operation for decay heat removal includes when the required RHR pump is not operating or when the system is realigned from or to the RHR shutdown cooling mode. This allowance is necessary since the RHR System may be required to operate in the shutdown cooling mode to remove decay heat and sensible heat from the reactor.
At these low pressures and decay heat levels, a reduced complement of ECCS subsystems should provide the required core cooling, thereby allowing operation of RHR shutdown cooling when necessary.
Monticello B 3.5.1-5 Revision No. -
ECCS - Operating 3.5.1 BASES APPLICABILITY All ECCS subsystems are required to be OPERABLE during MODES 1, 2, and 3, when there is considerable energy in the reactor core and core cooling would be required to prevent fuel damage in the event of a break in the primary system piping. In MODES 2 and 3, when reactor steam dome pressure is I 150 psig, ADS and HPCl are not required to be OPERABLE because the low pressure ECCS subsystems can provide sufficient flow below this pressure.
ECCS requirements for MODES 4 and 5 are specified in LC0 3.5.2, "ECCS - Shutdown." ACTIONS A Note prohibits the application of LC0 3.0.4.b to an inoperable HPCl subsystem. There is an increased risk associated with entering a MODE or other specified condition in the Applicability with an inoperable HPCl subsystem and the provisions of LC0 3.0.4.b, which allow entry into a MODE or other specified condition in the Applicability with the LC0 not met after performance of a risk assessment addressing inoperable systems and components, should not be applied in this circumstance. If one LPCl pump is inoperable, the inoperable pump must be restored to OPERABLE status within 30 days.
In this condition, the remaining OPERABLE pumps provide adequate core cooling during a LOCA. However, overall LPCl reliability is reduced, because a single failure in one of the remaining OPERABLE LPCl subsystems, concurrent with a LOCA, may result in the LPCl subsystems not being able to perform their intended safety function. The 30 day Completion Time is based on a reliability study cited in Reference 11 that evaluated the impact on ECCS availability, assuming various components and subsystems were taken out of service. The results were used to calculate the average availability of ECCS equipment needed to mitigate the consequences of a LOCA as a function of allowable repair times (i.e., Completion Times). If a LPCl subsystem is inoperable for reasons other than Condition A, or a CS subsystem is inoperable, the inoperable low pressure injectiontspray subsystem must be restored to OPERABLE status within 7 days. In this condition, the remaining OPERABLE subsystems provide adequate core cooling during a LOCA. However, overall ECCS reliability is reduced, because a single failure in one of the remaining OPERABLE subsystems, concurrent with a LOCA, may result in the ECCS not being able to perform its intended safety function. The 7 day Completion Time is based Monticello B 3.5.1-6 Revision No. -
ECCS - Operating 3.5.1 BASES ACTIONS (continued) on a reliability study (Ref.
I I) that evaluated the impact on ECCS availability, assuming various components and subsystems were taken out of service. The results were used to calculate the average availability of ECCS equipment needed to mitigate the consequences of a LOCA as a function of allowed outage times (i.e., Completion Times).
If one LPCl pump in each subsystem is inoperable, one inoperable LPCl pump must be restored to OPERABLE status within 7 days. In this condition, the remaining OPERABLE ECCS subsystems provide adequate core cooling during a LOCA. However, overall ECCS reliability is reduced because a single failure in one of the remaining OPERABLE ECCS subsystems, concurrent with a LOCA, may result in the ECCS not being able to perform its intended safety function. The 7 day Completion Time is based on a reliability study (Ref.
I I) that evaluated the impact on ECCS availability, assuming various components and subsystems were taken out of service. The results were used to calculate the average availability of ECCS equipment needed to mitigate the consequences of a LOCA as a function of allowed outage times (i.e., Completion Times). CS subsystems provide adequate core cooling during a LOCA. However, overall ECCS reliability is reduced, because a single failure in one of the remaining CS subsystems, concurrent with a LOCA, may result in ECCS not being able to perform its intended safety function. The 72 hour8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Completion Time is based on a reliability study cited in Reference 11 that evaluated the impact on ECCS availability, assuming various components and subsystems were taken out of service. The results were used to calculate the average availability of ECCS equipment needed to mitigate the consequences of a LOCA as a function of allowable repair times (i.e., Completion Times).
Monticello B 3.5.1-7 Revision No. -
ECCS - Operating 3.5.1 BASES - - - -A ACTIONS (continued) If any one low pressure CS subsystem is inoperable in addition to either one LPCl subsystem OR one or two LPCl pump(s), adequate core cooling is ensured by the OPERABILITY of HPCl and the remaining low pressure ECCS subsystems. This condition results in a complement of remaining OPERABLE low pressure ECCS (i.e., one CS and either two or three LPCl pumps) whose makeup capacity is bounded by the minimum makeup capacity evaluated in the accident analysis, which assumes the limiting single component failure (Reference 10). However, overall ECCS reliability is reduced, because a single active component failure in the remaining low pressure ECCS, concurrent with a design basis LOCA, could result in the minimum required ECCS equipment not being available. Since both a CS subsystem is inoperable and a reduction in the makeup capability of the LPCl System has occurred, a more restrictive Completion Time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> is required to restore either a CS subsystem or, either a LPCl subsystem OR the LPCl pump(s) to OPERABLE status. The Completion Time was developed using engineering judgment based on a reliability study cited in Reference 11 and previous BWR licensing precedents. This Completion Time has been found to be acceptable through operating experience.
F.l and F.2 If both low pressure CS subsystems are inoperable, adequate core cooling is ensured by the OPERABILITY of HPCl and the two remaining low pressure LPCl subsystems. However, overall ECCS reliability is reduced, because a single active component failure in a LPCl subsystem, concurrent with a design basis LOCA, could result in the minimum required ECCS equipment not being available. Since both CS subsystems are inoperable, a more restrictive Completion Time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> is required to restore one CS subsystem to OPERABLE status. The Completion Time was developed using engineering judgment based on a reliability study cited in Reference 11 and previous BWR licensing precedents. This Completion Time has been found to be acceptable I through operating experience.
I Monticello Revision No. -
ECCS - Operating 3.5.1 BASES ACTIONS (continued) m p.1 and ~.2,) and associated Completion Time of Condition A, met, the plant must be brought to a MODE in apply. To achieve this status, the plant must be brought to at least MODE 3 within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> and to MODE 4 within 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br />. The allowed Completion Times are reasonable, based on operating experience, to reach the required plant conditions from full power conditions in an orderly manner and without challenging plant systems. If two LPCl subsystems are inoperable due to open RHR intertie return line isolation valve(s), the RHR intertie line must be isolated within 18 hours2.083333e-4 days <br />0.005 hours <br />2.97619e-5 weeks <br />6.849e-6 months <br />. The line can be isolated by closing both RHR intertie return line isolation valves or by closing one RHR intertie return line isolation valve and the RHR intertie suction line isolation valve. The 18 hour2.083333e-4 days <br />0.005 hours <br />2.97619e-5 weeks <br />6.849e-6 months <br /> Completion Time is reasonable, considered the low probability of a DBA occurring during this period.
If the Required Action and associated Completion Time of
~ondition@is not met, the plant must be brought to a MODE in which the RHR intertie return line isolation valves are not required to be closed. To achieve this status, the plant must be brought to at least MODE 2 within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />. The allowed Completion Time is reasonable, based on operating experience, to reach the required plant conditions from full power conditions in an orderly manner and without challenging plant systems. If the HPCl System is inoperable and the RClC System is verified to be OPERABLE, the HPCl System must be restored to OPERABLE status within 14 days. In this condition, adequate core cooling is ensured by the OPERABILITY of the redundant and diverse low pressure ECCS injectionlspray subsystems in conjunction with ADS. Also, the RClC System will automatically provide makeup water at most reactor operating pressures. Verification of RClC OPERABILITY is therefore required immediately when HPCl is inoperable. This may be performed as an administrative check by examining logs or other information to determine Monticello B 3.5.1-9 Revision No. -
ECCS - Operating 3.5.1 BASES ACTIONS (continued) if RClC is out of service for maintenance or other reasons. It does not mean to perform the Surveillances needed to demonstrate the OPERABILITY of the RClC System. If the OPERABILITY of he RClC System cannot be immediately verified, however, Conditio N ust be rd. entered. In the event of component failures concurrent with a design basis LOCA, there is a potential, depending on the specific failures, that the minimum required ECCS equipment will not be available. A 14 day Completion Time is based on a reliability study cited in Reference 11 and has been found to be acceptable through operating experience.
El and K~ If any one low pressure ECCS injectionlspray subsystem, or one LPCl pump in both LPCl subsystems, is inoperable in addition to an inoperable HPCl System, the inoperable low pressure ECCS injectionlspray subsystem(s) or the HPCl System must be restored to OPERABLE status within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. In this condition, adequate core cooling is ensured by the OPERABILITY of the ADS and the remaining low pressure ECCS subsystems. However, the overall ECCS reliability is significantly reduced because a single failure in one of the remaining OPERABLE subsystems concurrent with a design basis LOCA may result in the ECCS not being able to perform its intended safety function. Since both a high pressure system (HPCI) and a low pressure subsystem(s) are inoperable, a more restrictive Completion Time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> is required to restore either the HPCl System or the low pressure ECCS injectionlspray subsystem(s) to OPERABLE status. This Completion Time is based on a reliability study cited in Reference 11 and has been found to be acceptable through operating experience.
The LC0 requires three ADS valves to be OPERABLE in order to provide the ADS function. Reference 12 contains the results of an analysis that evaluated the effect of one ADS valve being out of service. Per this analysis, operation of only two ADS valves will provide the required depressurization. However, overall reliability of the ADS is reduced, because a single failure in the OPERABLE ADS valves could result in a reduction in depressurization capability. Therefore, operation is only allowed for a limited time. The 14 day Completion Time is based on a reliability study cited in Reference 11 and has been found to be acceptable through operating experience.
Monticello B 3.5.1-10 Revision No. -
ECCS - Operating 3.5.1 BASES ACTIONS (continued) (M.1 and M.21 If any one low pressure ECCS injectionlspray subsystem, or one LPCl pump in both LPCl subsystems, is inoperable in addition to one inoperable ADS valve, adequate core cooling is ensured by the OPERABILITY of HPCl and the remaining low pressure ECCS injectionlspray subsystem. However, overall ECCS reliability is reduced because a single failure in one of the remaining OPERABLE subsystems concurrent with a design basis LOCA may result in the ECCS not being able to perform its intended safety function.
Since both a high pressure system (ADS) and a low pressure subsystem(s) are inoperable, a more restrictive Completion Time of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> is required to restore either the low pressure ECCS subsystem(s) or the ADS valve to OPERABLE status. This Completion Time is based on a reliability study cited in Reference 11 and has been found to be acceptable through operating experience.
If any Required Action and associated Completion Time of ~onditiom
-0r.M)~ not met, or if two or more ADS valves are inoperable, or GI System or one or more ADS valves are inoperable and E F or hntered, the plant must be brought to a condition in I which the oes not apply. To achieve this status, the plant must be brought to at least MODE 3 within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> and reactor steam dome pressure reduced to 2 150 psig within 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br />. The allowed Completion Times are reasonable, based on operating experience, to reach the required plant conditions from full power conditions in an orderly manner and without challenging plant systems.
0.1 ressure ECCS injectionlspray~systems.are.jno~?e~b!e
..------.~-~.....-----------
-..-----..---
an.Cond.it.ion~~C,..~~~EI.F.or.H~L.t.~ee~!a~.~..issir!.a.
degraded-condition-nof .s~ec!f!ca!l~.just-i~iedfor-contjnuedo~eration,.and on ourslue or the accident analyses.
I herefore, entered immediately. failure assumptions of the accident analysis the plant may not be in an unanalyzed condition (Ref. 10) but the allowable duration for operation in the condition has not been justified, therefore LC0 3.0.3 must be entered immediately.
Monticello B 3.5.1-1 1 Revision No. -