ML17346A918: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(3 intermediate revisions by the same user not shown)
Line 3: Line 3:
| issue date = 03/28/1985
| issue date = 03/28/1985
| title = Forwards Revised Significant Hazards Statement & Detailed Explanation of Amends to Licenses DPR-31 & DPR-41 Re Containment Integrity Requested in 850128 Ltr.Corrected Tech Spec Pages 3.10-1,3.10-2 & 3.10-4 Encl
| title = Forwards Revised Significant Hazards Statement & Detailed Explanation of Amends to Licenses DPR-31 & DPR-41 Re Containment Integrity Requested in 850128 Ltr.Corrected Tech Spec Pages 3.10-1,3.10-2 & 3.10-4 Encl
| author name = WILLIAMS J W
| author name = Williams J
| author affiliation = FLORIDA POWER & LIGHT CO.
| author affiliation = FLORIDA POWER & LIGHT CO.
| addressee name = THOMPSON H R
| addressee name = Thompson H
| addressee affiliation = NRC OFFICE OF NUCLEAR REACTOR REGULATION (NRR)
| addressee affiliation = NRC OFFICE OF NUCLEAR REACTOR REGULATION (NRR)
| docket = 05000250, 05000251
| docket = 05000250, 05000251
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:REGULATORY FORMATION DISTRIBUTION SY M (RIDS)ACCESSION NBR:8504020296 DOC~DATE: 85/03/28 NOTARIZED:
{{#Wiki_filter:REGULATORY     FORMATION DISTRIBUTION SY           M (RIDS)
NO DOCKET FACIL;50-250 Turkey Point Plant~Unit 3, F,lor)da Power and Light C 05000250 50 251 Turkey Point Planti Unit 4, Florida Power and Light.C 0500025}AUTH, NAME AUTHOR AFFILIATION WILLIAMS,JiH.
ACCESSION NBR:8504020296           DOC ~ DATE: 85/03/28       NOTARIZED: NO           DOCKET FACIL;50-250 Turkey Point Plant~ Unit 3, F,lor)da Power and Light                   C   05000250 50 251 Turkey Point Planti Unit 4, Florida Power and Light.                 C   0500025}
Flor fda Power 8 Light Co, REC IP~NAME RECIPIENT AFF II I ATION THOMPSON<H.R, Division of I icensing SUBJECT;Forwards revised significant hazards statement.,a detailed explanation of amends to Licenses DPR 3}8 DPR 41 re containment integrity requested--
AUTH, NAME           AUTHOR AFFILIATION WILLIAMS,JiH.         Flor fda Power     8 Light Co, REC IP ~ NAME         RECIPIENT AFF II I ATION THOMPSON<H.R,         Division of   I icensing SUBJECT;     Forwards revised significant hazards statement.,a detailed explanation of amends to Licenses DPR 3} 8 DPR 41 re containment integrity requested-- in 8S0128 l,tr Corrected Tech Spec Pages   3 '0-}i3.10     2 8 3, 10   4   ncl,
in 8S0128 l,tr~Corrected Tech Spec Pages 3'0-}i3.10 2 8 3, 10 4 ncl, DISTRIBUTION CODE!A001D COPIES RECEIJEDiLTR ENCL'IZEC TITLE: OR Submittal:
                                                                        ~
General Distribution NOTES!OI.:07/19/72 OL:04/14/73
DISTRIBUTION CODE! A001D         COPIES RECEIJEDiLTR           ENCL   'IZEC TITLE:   OR Submittal: General Distribution NOTES!                                                                               ~
~05000250 05000251 RECIPIENT ID CODE/NAME NRR ORB}BC Ol INTERNALS ACRS 09 ELD/HDS4 NRR/DL DIR NRR/DI./TSRG NRR/DS I/RA 8 RGN2 EXTERNALe EG<G BRUSKEgS NRC PDR 02'OPIES LTTR ENCL 77 6 6 1 0 1 1 1 1 1 1 1 1-1 1 1 RECIPIENT ID CODE/NAME LPDR NSIC" 03 05 ADM/LFMB NRR/DE/MTEB NRR/DL/ORAB N I/METB RE F IL 0 COPIES LTTR'NCL'0 1 1 0 1 1 1~1 1 1~TOTAI.NUMBER OF COPIES REQUIRED'TTR 27 ENCL'4 I t r,~P w'I f (J h'I fI
05000250 OI.:07/19/72 05000251 OL:04/14/73 RECIPIENT                             RECIPIENT            COPIES ID CODE/NAME                         ID CODE/NAME          LTTR'NCL' NRR ORB} BC     Ol     77 LTTR ENCL INTERNALS ACRS               09     6      6    ADM/LFMB ELD/HDS4       02'OPIES1      0    NRR/DE/MTEB              1 0
~yak Iljg r~-FLORIDA POWER&LIGHT COMPANY gQ 2 8[885 L-85-92 Office of Nuclear Reactor Regulation Attention:
NRR/DL DIR                     1    NRR/DL/ORAB              1    0 NRR/DI./TSRG           1      1    N        I/METB          1    1 NRR/DS I/RA8            1      1    RE    F IL        0 RGN2                   1      1 EXTERNALe EG<G BRUSKEgS             1-      1     LPDR              03      1 ~
Mr.Hugh R.Thompson, Director Division of Licensing U.S.Nuclear Regulatory Commission Washington, D.C.20555
1 NRC PDR                1       1     NSIC"             05     1     1 ~
TOTAI. NUMBER OF COPIES     REQUIRED'TTR         27   ENCL'4


==Dear Mr.Thompson:==
          'I I
Re: Turkey Point Units 3 and 0 Docket Nos.50-250 and 50-251 Proposed License Amendment Containment Inte rit Florida Power 4 Light forwarded a request for license amendment concerning containment integrity in our letter L-85-52, dated 3anuary 28, 1985.In response to a request from your staff we have prepared a revised significant hazards statement and a detailed explanation of requested changes.These items are attached.Also attached are pages 3.10-1, 3.10-2, and 3.10-0.These pages correct typographical errors on our original submittal.
t r, ~        P w            f (
Should you or your staff have any'additional questions, please contact us.Very truly yours, 3.W.Williams, jr.Group Vice President Nuclear Energy 3W W/PLP/js Attachment cc: Dr.J.Nelson Grace, Region II Harold F.Reis, Esquire Lyle Jerrett, Administration Radiological Health Services Dept.of Health R Rehabilitative Services 1323 Winewood Boulevard Tallahassee, FL 32301 PNS-LI-85-88p 850402029b 850328 PDR ADOCK 05000250 P PDR PEOPLE...SERVING PEOPLE ATTACH MENT Re: Turkey Point Units 3 and 0 Docket Nos.50-250 and 50-251 Proposed License Amendment Containment Inte rit The following discussion is provided to support FPL's conclusion that the changes in our Proposed License Amendment for Containment Integrity dated 3anuary 28, 1985 do not represent a significant safety hazard, and that operation of the facility in accordance with the proposed amendment would not: '(1)Involve a significant increase in the probability or consequences of an accident previously evaluated; or (2)Create the possibility of a new or different kind of accident from any accident previously evaluated; or (3)Involve a significant reduction in a margin of safety.The examples mentioned with the following items refer to Examples of Amendment That Are Considered Not Likely to Involve Significant Hazards Considerations as.published in the Federal Register on April 6, 1983.Table 1.1, Definitions 1.8, 1.9, and 1.36.Mode Definitions The addition of Operational Modes as described in the STS is similar to example ii.These changes add MODE definition to the area between the current hot shutdown and cold shutdown and therefore constitute an additional control not presently included in technical specifications.
J h
Specification
                  'I fI


===1.5 Definition===
                                                                                              ~yak Iljg r~-
of Containment Integrity This change is made to achieve consistency with proposed specification 3.3.1 and the STS and is therefore an administrative change and similar to example Specification
FLORIDA POWER & LIGHT COMPANY gQ 2 8  [885 L-85-92 Office of Nuclear Reactor Regulation Attention:      Mr. Hugh R. Thompson, Director Division of Licensing U. S. Nuclear Regulatory Commission Washington, D. C. 20555


===3.0 Limiting===
==Dear Mr. Thompson:==
Conditions for Operation-Applicability The addition of proposed specification 3.02, 3.03, and 3.00 are changes similar to example ii in that they add additional limitations, restrictions or controls not presently included in the technical specifications. Specification


====3.3.1 Containment====
Re:  Turkey Point Units 3 and 0 Docket Nos. 50-250 and 50-251 Proposed License Amendment Containment Inte rit Florida Power 4 Light forwarded a request for license amendment concerning containment integrity in our letter L-85-52, dated 3anuary 28, 1985. In response to a request from your staff we have prepared a revised significant hazards statement and a detailed explanation of requested changes. These items are attached.
Integrity The proposed specification is a format change only, except for the footnote.The current specification, 3.3.l.a, requires containment integrity except in cold shutdown as does the proposed specification 3.3.1.Because this portion is a reformatting it is similar to example i.The second portion of the current specification, 3.3.1.b concerns containment integrity with the reactor vessel head removed.In the current specification, containment integrity is required when the vessel head is removed and the reactor is not in refueling shutdown condition (10%subcritical and Tave<160).The 1st note to the Action statement in proposed specification 3.10.8 requires that the reactor be maintained in MODE 6 (IOFo subcritical and Tave(100oF)whenever there is fuel in the reactor and the vessel head closure bolts are less than fully tensioned on with the head removed.This proposed specification eliminates the need for the containment integrity requirements of current specification 3.3.1.b as this condition mentioned in the current specification will not be allowed.Because the MODE 6 requirements are stricter and the proposed specification will apply to the case where the vessel head closure bolts are less than fully tensioned, this change constitutes an additional limitation, restriction or control and is similar to example ii.The exception note to allow for testing of valves is similar to the STS note to Table 3.6-1 (Containment Isolation Valves).This change is being requested in response to a commitment to USNRC, Region II as described in Inspection Reports 250-80-27 and 251-80-28.
Also attached are pages 3.10-1,          3.10-2, and   3.10-0. These  pages    correct typographical errors on our original submittal.
This change does not involve a significant increase.in the probability or consequences of an accident previously evaluated because the opening of those valves under administrative controls could not cause an accident that has been previously evaluated, and because the administrative controls will ensure that the valves are quickly shut, should a previously evaluated accident occur, the consequences of the accident should not be significantly increased.
Should you or your  staff have any'additional questions, please contact us.
This change does not create the possibility of a new or different kind of accident from any accident previously evaluated because the opening of the valves under administrative controls cannot cause an accident.This change does not involve a significant reduction in a margin of safety because the administrative controls will ensure the valves and quickly shut in the event they are required.Specification
Very truly yours,
: 3. W. Williams, jr.
Group Vice President Nuclear Energy 3W W/PLP/js Attachment cc:    Dr. J. Nelson Grace, Region II Harold F. Reis, Esquire Lyle Jerrett, Administration Radiological Health Services Dept. of Health R Rehabilitative Services 1323 Winewood Boulevard Tallahassee, FL 32301 PNS-LI-85-88p 850402029b 850328 PDR    ADOCK 05000250 P                      PDR                                            PEOPLE... SERVING PEOPLE


====3.3.2 Internal====
ATTACHMENT Re:    Turkey Point Units 3 and 0 Docket Nos. 50-250 and 50-251 Proposed License Amendment Containment Inte rit The following discussion is provided to support FPL's conclusion that the changes in our Proposed License Amendment for Containment Integrity dated 3anuary 28, 1985 do not represent a significant safety hazard, and that operation of the facility in accordance with the proposed amendment would not:
Pressure This change is made to adopt the Standard Technical Specifi'cation.(STS) requirements for internal pressure.Because this change adds the requirements in Mode 0 and because it can require eventually going to cold shutdown, it constitutes an additional limitation, restriction or control not presently included in th'e technical specification and is therefore similar to example ii.
        '(1)  Involve a significant increase in the probability or consequences  of an accident previously evaluated; or (2)  Create the possibility of a new or different kind of accident from any accident previously evaluated; or (3) Involve a significant reduction in a margin of safety.
Specification
The examples mentioned with the following items refer to Examples of Amendment That Are Considered Not Likely to Involve Significant Hazards Considerations as
. published in the Federal Register on April 6, 1983.
Table 1.1, Definitions 1.8, 1.9, and 1.36. Mode Definitions The addition of Operational Modes as described in the STS is similar to example ii. These changes add MODE definition to the area between the current hot shutdown and cold shutdown and therefore constitute an additional control not presently included in technical specifications.
Specification 1.5 Definition of Containment Integrity This change is made to achieve consistency with proposed specification 3.3.1 and the STS and is therefore an administrative change and similar to example Specification 3.0 Limiting Conditions for Operation-Applicability The addition of proposed specification 3.02, 3.03, and 3.00 are changes similar to example ii in that they add additional limitations, restrictions or controls not presently included in the technical specifications.


====3.3.3 Containment====
Specification 3.3.1 Containment Integrity The proposed specification is a format change only, except for the footnote.
Isolation Valves The LCO of this specification and applicability are changes in format to use the definition of MODES.This portion of the change is purely administrative to achieve consistency throughout the technical specifications and is similar to example i.The Action statement of the proposed specification is added for clarification and operational flexibility in the event of an inoperable contain-ment isolation valve.By adding the STS Action statement, the specifications are made clearer because there is no specified requirements for action required in the current specification, as current specification 3.0.1 does not specifically apply to this LCO.Because this change constitutes an additional limitation, restriction or control not presently included in the technical specifications, it is similar to example ii.Specification
The current specification, 3.3.l.a, requires containment integrity except in cold shutdown as does the proposed specification 3.3.1. Because this portion is a reformatting it is similar to example i. The second portion of the current specification, 3.3.1.b concerns containment integrity with the reactor vessel head removed.      In the current specification,      containment integrity is required when the vessel head is removed and the reactor is not in refueling shutdown condition (10% subcritical and Tave<160 ). The 1st note to the Action statement in proposed specification 3.10.8 requires that the reactor be maintained in MODE 6 (IOFo subcritical and Tave( 100oF) whenever there is fuel in the reactor and the vessel head closure bolts are less than fully tensioned on with the head removed. This proposed specification eliminates the need for the containment integrity requirements of current specification 3.3.1.b as this condition mentioned in the current specification will not be allowed. Because the MODE 6 requirements are stricter and the proposed specification will apply to the case where the vessel head closure bolts are less than fully tensioned, this change constitutes an additional limitation, restriction or control and is similar to example ii.
The exception note to allow for testing of valves is similar to the STS note to Table 3.6-1 (Containment Isolation Valves). This change is being requested in response to a commitment to USNRC, Region II as described in Inspection Reports 250-80-27 and 251-80-28. This change does not involve a significant increase. in the probability or consequences        of an accident previously evaluated because the opening of those valves under administrative controls could not cause an accident that has been previously evaluated, and because the administrative controls will ensure that the valves are quickly shut, should a previously evaluated accident occur, the consequences of the accident should not be significantly increased. This change does not create the possibility of a new or different kind of accident from any accident previously evaluated because the opening of the valves under administrative controls cannot cause an accident. This change does not involve a significant reduction in a margin of safety because the administrative controls will ensure the valves and quickly shut in the event they are required.
Specification 3.3.2 Internal Pressure This change is made to adopt the Standard Technical Specifi'cation.(STS) requirements for internal pressure.         Because   this change adds the requirements in Mode 0 and because it can require eventually going to cold shutdown, it constitutes an additional limitation, restriction or control not presently included in th'e technical specification and is therefore similar to example ii.


====3.3.0 Containment====
Specification 3.3.3 Containment Isolation Valves The LCO of this specification and applicability are changes in format to use the definition of MODES. This portion of the change is purely administrative to achieve consistency throughout the technical specifications and is similar to example i. The Action statement of the proposed specification is added for clarification and operational flexibility in the event of an inoperable contain-ment isolation valve. By adding the STS Action statement, the specifications are made clearer because there is no specified requirements for action required in the current specification, as current specification 3.0.1 does not specifically apply to this LCO. Because this change constitutes an additional limitation, restriction or control not presently included in the technical specifications, it is similar to example ii.
Airlocks This specification is added in the STS format as a new specification.
Specification 3.3.0 Containment Airlocks This specification is added in the STS format as a new specification. Because it adds an addition limitation, restriction or control not presently included in "the technical specifications, this change is similar to example ii.
Because it adds an addition limitation, restriction or control not presently included in"the technical specifications, this change is similar to example ii.Specification 3.0.1 f and g Engineered Safety Features These specifications are moved from the Engineered Safety Features section to the Refueling section of the specifications as in the STS.This change is an administrative change to achieve consistency throughout the technical specifications and is similar to example i.Specif ication 3.10.1 Containment Building Penetrations This change is a format change to adopt the STS wording except for the exception note concerning testing of the valves.Because this change places minimum requirements on the securing of the equipment door it constitutes an additional limitation, restriction or control not presently included in the technical specifications and this portion of the change is similar to example ii.The exception to allow opening of valves for testing was discussed above for proposed specification 3.3.1.Specification 3.10.2 Containment Ventilation.
Specification 3.0.1  f and  g Engineered Safety Features These specifications are moved from the Engineered Safety Features section to the Refueling section of the specifications as in the STS. This change is an administrative change to achieve consistency throughout the technical specifications and is similar to example i.
Isolation System This change does not alter the current requirements in that the containment ventilation isolation system must be OPERABLE during core alteration This is a format change to achieve consistency of STS format in the technical specifications and is similar to example i.Specification 3.10.3 Instrumentation This change adds the STS action statement including the additional require-ment to determine boron concentration.
Specif ication 3.10.1 Containment Building Penetrations This change is a format change to adopt the STS wording except for the exception note concerning testing of the valves. Because this change places minimum requirements on the securing of the equipment door it constitutes an additional limitation, restriction or control not presently included in the technical specifications and this portion of the change is similar to example ii. The exception to allow opening of valves for testing was discussed above for proposed specification 3.3.1.
Because this change constitutes an additional limitation, restriction or control not presently included in the technical specifications, it is similar to example ii.
Specification 3.10.2 Containment Ventilation. Isolation System This change does not alter the current requirements in that the containment ventilation isolation system must be OPERABLE during core alteration This is a format change to achieve consistency of STS format in the technical specifications and is similar to example i.
0~
Specification 3.10.3 Instrumentation This change adds the STS action statement including the additional require-ment to determine boron concentration. Because this change constitutes an additional limitation, restriction or control not presently included in the technical specifications, it is similar to example ii.
Specification 3.10.0 Radiation Monitoring This change adapts a portion of current specification 3.10.2 to the STS format, and deletes current specification 3.10.3.The deletion of specification 3.10.3 eliminates duplicate, unclear requirements.
 
The monitoring of radiation levels in containment and the spent fuel storage areas are addressed by proposed specifications 3.10.0 and by current specification Table 3.5-3, Table 3 5 Oy Table 3.5-5, and Table 3.9-3.The addition of specific action statements from STS 3.3.3.1, Table 3.3-6 adds additional limitation, restriction or controls not presently included and is therefore similar to example ii.Specification 3.10.5 Decay Time This change adopts the format and wording of the STS without changing the requirements and is a purely admiriistrative change similar to example i.Specif ication 3.10.6 Communications This change adopts the format and wording of the STS without changing the requirements and is a purely administrative change similar to example i.Specification 3.10.7 Residual Heat Removal and Coolant Circulation This change adopts the STS format, moves the requirements from current specification 3.0.1f and g to the Refueling section and includes additional requirements which are more restrictive than the current specification.
0
Because this change constitutes an additional limitation, restriction or control not presently included in the technical specification, it is similar to example ii.Specification 3.10.8 Boron Concentration This change adopts the STS format and applicable wording, which adds additional requirements concerning action to be taken.Because this change constitutes additional limitations, restrictions or controls not presently included in the technical specification it is similar to example ii.Specification 3.10.9 Crane Travel-Spent Fuel Storage Area This change adopts the STS format, and is purely administrative in nature.The change is therefore similar to example i.Specification 3.12 Cask Handling This is purely an administrative change to change a reference which was modified by the change discussed above in proposed specification 3.10.9.Because the change is purely administrative to achieve consistency throughout the technical specification, this change is similar to example i.
  ~
Turkey Point Units 3 an 4 Docket Nos.50-250 and 50-251 Containment Inte rit EXPLANATION OF REQUESTED CHANGES This section is revised to supersede our present 3.0.1, with the STS 3.0.1, 3.0.2 3.0.3 and 3.0A.Our present 3.0.2 is kept and renumbered to be 3.0.5.These changes are deemed necessary in order to facilitate our conversion to MODES of operation and subsequent STS format.In addition, these changes offer additional clarification of LCO applicability and action requirements.
 
a Section 3.3.1: Containment Integrity This section is modified to reflect STS except for the requested exception to be able to breach containment integrity by opening certain valves and/or airlocks under administrative controls in order to perform surveillance or testing requirements.
Specification 3.10.0 Radiation Monitoring This change adapts a portion of current specification 3.10.2 to the STS format, and deletes current specification 3.10.3.            The deletion of specification 3.10.3 eliminates duplicate, unclear requirements.             The monitoring of radiation levels in containment and the spent fuel storage areas are addressed by proposed specifications 3.10.0 and by current specification Table 3.5-3, Table 3 5 Oy Table 3.5-5, and Table 3.9-3. The addition of specific action statements from STS 3.3.3.1, Table 3.3-6 adds additional limitation, restriction or controls not presently included and is therefore similar to example ii.
This exception request is in compliance with a commitment made to NRC Region II Inspector, C.M.Hosey, as described in Inspection Report 250-80-27 and 251-80-28.
Specification 3.10.5 Decay Time This change adopts the format and wording of the STS without changing the requirements and is a purely admiriistrative change similar to example i.
Similarly, STS Table 3.6-1 offers the ability of opening certain containment isolation valves on an intermittent basis under administrative control.Section 3.3.2: Internal Pressure This section is modified to adopt STS format and add applicability and action statements.
Specif ication 3.10.6 Communications This change adopts the format and wording of the STS without changing the requirements and is a purely administrative change similar to example i.
The STS action statement for this specification is more conservative than our present one, and it is being adopted in this change.Section 3.3.3: Containment Isolation Valves This section is modified to adopt the STS format.The applicability modes are added and and the action statements from STS are adopted, which offers further clarification and operational flexibility upon discovery of inoperable containment isolation valves.Section 3.3.0: Containment Air Locks This section is adopted as a new specification, which is not presently contained in our specifi-cations.This change is deemed necessary to place restrictions and action statements to be invoked in case of discovering a containment air lock inoperable.
Specification 3.10.7 Residual Heat Removal and Coolant Circulation This change adopts the STS format, moves the requirements from current specification 3.0.1f and g to the Refueling section and includes additional requirements which are more restrictive than the current specification.
~Pa e 3.0-3 This page is modified to delete the specifications for coolant loops operability in refueling shutdown and transfer themto Section 3.10.This is done in order to organize our Technical Specifications in a more efficient manner.Section 3.10: Refueling Operations
Because this change constitutes an additional limitation, restriction or control not presently included in the technical specification, it is similar to example ii.
'ection 3.10.1: Containment Building Penetrations This section is modified to adopt the STS format except for the requested exeption, to be able to breach containment integrity by opening certain valves and/or airlocks under administrative controls in order to perform surveillance or testing requirements.
Specification 3.10.8 Boron Concentration This change adopts the STS format and applicable wording, which adds additional requirements concerning action to be taken. Because this change constitutes additional limitations, restrictions or controls not presently included in the technical specification it is similar to example ii.
This exception request is in compliance with a commitment made to NRC Region II Inspector, C.M.Hosey, as described in Inspection Report 250-80-27 and 251-80-28.
Specification 3.10.9 Crane Travel - Spent Fuel Storage Area This change adopts the STS format, and is purely administrative in nature.
This'hange also contains the addition of applicability and action statements, which are being adopted from STS.
The change is therefore similar to example i.
Section 3.10.2: Containment Ventilation Isolation System This section is modified to adopt the STS format.Applicability and action statements are also adopted from STS.This change offers operational flexibility and restrictions to be invoked at refueling conditions.
Specification 3.12 Cask Handling This is purely an administrative change to change a reference which was modified by the change discussed above in proposed specification 3.10.9.
Section 3.10.3: Instrumentation This section is modified to adopt the STS format.The present specification is not altered, only the addition of applicability and action statements are adopted from STS.Section 3.10.0: Radiation Monitoring This section is modified to adopt the STS format.The present specification is not altered, only the addition of applicability and action statements are adopted from STS.Section 3.10 5: Decay Time This section is modified to adopt the STS format.The applicability and action statements are included from present Technical Specifications and are in compliance with STS.Section 3.10.6: Communications This section is modified to adopt the STS format.The applicability and action statements are included from present Technical Specifications and are in compliance with STS.Section 3.10.7: RHR and Coolant Circulation This section i's modified to adopt the STS format.Two subsections are presented to further separate specifications for high water and low water levels in the reactor vessel.The appli-cability and action statements are adopted from STS and are more conservative than our present specifications.
Because the change is purely administrative to achieve consistency throughout the technical specification, this change is similar to example i.
This change is deemed'ecessary to offer operational flexibility and restrictions to be invoked for residual heat removal at refueling conditions.
 
Section 3.10.8: Boron Concentration This section is modified to adopt STS format.The specification, applicability and action statements are those in STS, which are more restrictive than our present, Section 3.10.9: Crane Travel-Spent Fuel Storage Areas This section is modified to adopt the STS format.The specification, applicability and,action statements are from our present Technical Specifications and are identical to STS.Section 3.12: Cask Handling This section is modified only to reflect the new reference number to be TS 3.10.9.No format changes are being made.Section B3.0: Subsections B3.0.1, B3.0.2, B3.0.3 and B3.0.0 are adopted from STS in order to support the proposed philosopy of MODES of operation.
Turkey Point Units 3 an 4 Docket Nos. 50-250 and 50-251 Containment Inte    rit EXPLANATION OF REQUESTED CHANGES This section is revised to supersede our present 3.0.1, with the STS 3.0.1, 3.0.2 3.0.3 and 3.0A. Our present 3.0.2 is kept and renumbered to be 3.0.5.
The only change is made in B3.0.1, where the hours are changed to reflect our present LCOs.Subsection B3.0.5 is a carryover from our present Bases, with no changes.Section B.3.3.1: Containment Integrity This section is adopted from STS and was not specifically contained in our present Bases.This proposed change does not represent a deviation from the FSAR.
These changes are deemed necessary in order to facilitate our conversion to MODES of operation and subsequent STS format. In addition, these changes offer additional clarification of LCO applicability and action requirements.
Section B.3.3.2: Internal Pressure This section is a carryover from our present Bases, except for a change made to the contain-ment design pressure from 55 psig to 59 psig to be consistent with our FSAR, Section 5.1.1.Section B.3.3.3:-Containment Isolation Valves.This section is adopted from STS and was not specifically addressed in our current Bases.The GDC numbers were left out and will be included as=part of our STS conversion project.This change does not represent a deviation from the FSAR.Section B3.3.0: Containment Air Locks This section is adopted from STS and was specifically addressed in our current Bases.This proposed change does not represent a deviation from the FSAR.Section B.3.10: Refueling Operations Section B3.10.1: Containment Building Penetrations This section is adopted from STS and was not specifically addressed in our current Bases.This change does not represent a deviation from our FSAR.Section B.3.10.2: Containment Ventilation Isolation This section is adopted from STS and was not specifically addressed in our current Bases.This change does not represent a deviation from our FSAR.The title of this section i'different from STS and is necessary in order to maintain consistency with presently used terminology and documents.
a Section 3.3.1: Containment Integrity This section is modified to reflect STS except for the requested exception to be able to breach containment integrity by opening certain valves and/or airlocks under administrative controls in order to perform surveillance or testing requirements. This exception request is in compliance with a commitment made to NRC Region II Inspector, C. M. Hosey, as described in Inspection Report 250-80-27 and 251-80-28.
Section B3.10.3: Instrumentation This section is adopted from STS and was not specifically addressed in our current Bases.This change does not represent a deviation from our FSAR.Section B3.104 This section is included to be consistent with our Technical Specifications format, and is not necessarily covered by STS under Refueling Operations.
Similarly,  STS Table 3.6-1 offers the ability of opening certain containment isolation valves on an  intermittent basis under administrative control.
Section B3.10.5: Decay Time Section B3.10.6: Communications These sections are adopted from STS and our present Bases do contain similar statements, to the ones being proposed.These changes do not represent a deviation from our FSAR.Section B3.10.7: RHR and Coolant Circulation This section is a carry over from our present Bases and it is addressed in Page B3.l.la of our Technical Specifications.
Section 3.3.2: Internal Pressure This section is modified to adopt STS format and add applicability and action statements.
These Bases are presented in this section to be consistent with our format.Section B3.10.8: Boron Concentration This section is adopted from STS and our present Bases do contain similar statements to the ones being proposed.The changes made from STS are values consistent with our FSAR.Section B3.10.9: Crane Travel-'Spent Fuel Storage Areas This section is a carryover from our present Bases, which is compliance with STS.}}
The STS action statement for this specification is more conservative than our present one, and it is being adopted in this change.
Section 3.3.3: Containment Isolation Valves This section is modified to adopt the STS format. The applicability modes are added and and the action statements from STS are adopted, which offers further clarification and operational flexibilityupon discovery of inoperable containment isolation valves.
Section 3.3.0: Containment Air Locks This section is adopted as a new specification, which is not presently contained in our specifi-cations. This change is deemed necessary to place restrictions and action statements to be invoked in case of discovering a containment air lock inoperable.
~Pa  e 3.0-3 This page is modified to delete the specifications for coolant loops operability in refueling shutdown and transfer themto Section 3.10. This is done in order to organize our Technical Specifications in a more efficient manner.
Section 3.10: Refueling Operations 3.10.1: Containment Building Penetrations
                                      'ection This section is modified to adopt the STS format except for the requested exeption, to be able to breach containment integrity by opening certain valves and/or airlocks under administrative controls in order to perform surveillance or testing requirements. This exception request is in compliance with a commitment made to NRC Region II Inspector, C. M. Hosey, as described in Inspection Report 250-80-27 and 251-80-28.
This'hange also contains the addition of applicability     and action statements,   which are being adopted from STS.
 
Section 3.10.2: Containment Ventilation Isolation System This section is modified to adopt the STS format. Applicability and action statements are also adopted from STS. This change offers operational flexibility and restrictions to be invoked at refueling conditions.
Section 3.10.3: Instrumentation This section is modified to adopt the STS format. The present specification is not altered, only the addition of applicability and action statements are adopted from STS.
Section 3.10.0: Radiation Monitoring This section is modified to adopt the STS format. The present specification is not altered, only the addition of applicability and action statements are adopted from STS.
Section 3.10 5: Decay Time This section is modified to adopt the STS format. The applicability and action statements are included from present Technical Specifications and are in compliance with STS.
Section 3.10.6: Communications This section is modified to adopt the STS format. The applicability and action statements are included from present Technical Specifications and are in compliance with STS.
Section 3.10.7: RHR and Coolant Circulation This section i's modified to adopt the STS format. Two subsections are presented to further separate specifications for high water and low water levels in the reactor vessel. The appli-cability and action statements are adopted from STS and are more conservative than our present specifications. This change is deemed'ecessary         to offer operational flexibility and restrictions to be invoked for residual heat removal at refueling conditions.
Section 3.10.8: Boron Concentration This section is modified to adopt STS format. The specification, applicability and action statements are those in STS, which are more restrictive than our present, Section 3.10.9: Crane Travel - Spent Fuel Storage Areas This section is modified to adopt the STS format. The specification, applicability and,action statements are from our present Technical Specifications and are identical to STS.
Section 3.12: Cask Handling This section is modified only to reflect the new reference number to be TS 3.10.9.         No format changes are being made.
Section B3.0:
Subsections B3.0.1, B3.0.2, B3.0.3 and B3.0.0 are adopted from STS in order to support the proposed philosopy of MODES of operation. The only change is made in B3.0.1, where the hours are changed to reflect our present LCOs.
Subsection B3.0.5 is a carryover from our present Bases, with no changes.
Section B.3.3.1: Containment Integrity This section is adopted from STS and was not specifically contained in our present Bases.
This proposed change does not represent a deviation from the FSAR.
Section B.3.3.2: Internal Pressure This section is a carryover from our present Bases, except for a change made to the contain-ment design pressure from 55 psig to 59 psig to be consistent with our FSAR, Section 5.1.1.
Section B.3.3.3:- Containment Isolation Valves.
This section is adopted from STS and was not specifically addressed in our current Bases.
The GDC numbers were left out and will be included as=part of our STS conversion project.
This change does not represent a deviation from the FSAR.
Section B3.3.0: Containment Air Locks This section is adopted from STS and was specifically addressed in our current Bases. This proposed change does not represent a deviation from the FSAR.
Section B.3.10: Refueling Operations Section B3.10.1: Containment Building Penetrations This section is adopted from STS and was not specifically addressed     in our current Bases.
This change does not represent a deviation from our FSAR.
Section B.3.10.2: Containment Ventilation Isolation This section is adopted from STS and was not specifically addressed in our current Bases.
This change does not represent a deviation from our FSAR. The title of this section i' different from STS and is necessary in order to maintain consistency with presently used terminology and documents.
Section B3.10.3: Instrumentation This section is adopted from STS and was not specifically addressed     in our current Bases.
This change does not represent a deviation from our FSAR.
Section B3.104 This section is included to be consistent with our Technical Specifications format, and is not necessarily covered by STS under Refueling Operations.
Section B3.10.5: Decay Time Section B3.10.6: Communications These sections are adopted from STS and our present Bases do contain similar statements, to the ones being proposed. These changes do not represent a deviation from our FSAR.
Section B3.10.7: RHR and Coolant Circulation This section is a carry over from our present Bases and it is addressed in Page B3.l.la of our Technical Specifications. These Bases are presented in this section to be consistent with our format.
Section B3.10.8: Boron Concentration This section is adopted from STS and our present Bases do contain similar statements to the ones being proposed. The changes made from STS are values consistent with our FSAR.
Section B3.10.9: Crane Travel -'Spent Fuel Storage Areas This section is a carryover from our present Bases, which is compliance with STS.}}

Latest revision as of 22:14, 3 February 2020

Forwards Revised Significant Hazards Statement & Detailed Explanation of Amends to Licenses DPR-31 & DPR-41 Re Containment Integrity Requested in 850128 Ltr.Corrected Tech Spec Pages 3.10-1,3.10-2 & 3.10-4 Encl
ML17346A918
Person / Time
Site: Turkey Point  NextEra Energy icon.png
Issue date: 03/28/1985
From: Williams J
FLORIDA POWER & LIGHT CO.
To: Thompson H
Office of Nuclear Reactor Regulation
Shared Package
ML17346A919 List:
References
L-85-92, NUDOCS 8504020296
Download: ML17346A918 (11)
v • d • e


Text

REGULATORY FORMATION DISTRIBUTION SY M (RIDS)

ACCESSION NBR:8504020296 DOC ~ DATE: 85/03/28 NOTARIZED: NO DOCKET FACIL;50-250 Turkey Point Plant~ Unit 3, F,lor)da Power and Light C 05000250 50 251 Turkey Point Planti Unit 4, Florida Power and Light. C 0500025}

AUTH, NAME AUTHOR AFFILIATION WILLIAMS,JiH. Flor fda Power 8 Light Co, REC IP ~ NAME RECIPIENT AFF II I ATION THOMPSON<H.R, Division of I icensing SUBJECT; Forwards revised significant hazards statement.,a detailed explanation of amends to Licenses DPR 3} 8 DPR 41 re containment integrity requested-- in 8S0128 l,tr Corrected Tech Spec Pages 3 '0-}i3.10 2 8 3, 10 4 ncl,

~

DISTRIBUTION CODE! A001D COPIES RECEIJEDiLTR ENCL 'IZEC TITLE: OR Submittal: General Distribution NOTES! ~

05000250 OI.:07/19/72 05000251 OL:04/14/73 RECIPIENT RECIPIENT COPIES ID CODE/NAME ID CODE/NAME LTTR'NCL' NRR ORB} BC Ol 77 LTTR ENCL INTERNALS ACRS 09 6 6 ADM/LFMB ELD/HDS4 02'OPIES1 0 NRR/DE/MTEB 1 0

NRR/DL DIR 1 NRR/DL/ORAB 1 0 NRR/DI./TSRG 1 1 N I/METB 1 1 NRR/DS I/RA8 1 1 RE F IL 0 RGN2 1 1 EXTERNALe EG<G BRUSKEgS 1- 1 LPDR 03 1 ~

1 NRC PDR 1 1 NSIC" 05 1 1 ~

TOTAI. NUMBER OF COPIES REQUIRED'TTR 27 ENCL'4

'I I

t r, ~ P w f (

J h

'I fI

~yak Iljg r~-

FLORIDA POWER & LIGHT COMPANY gQ 2 8 [885 L-85-92 Office of Nuclear Reactor Regulation Attention: Mr. Hugh R. Thompson, Director Division of Licensing U. S. Nuclear Regulatory Commission Washington, D. C. 20555

Dear Mr. Thompson:

Re: Turkey Point Units 3 and 0 Docket Nos. 50-250 and 50-251 Proposed License Amendment Containment Inte rit Florida Power 4 Light forwarded a request for license amendment concerning containment integrity in our letter L-85-52, dated 3anuary 28, 1985. In response to a request from your staff we have prepared a revised significant hazards statement and a detailed explanation of requested changes. These items are attached.

Also attached are pages 3.10-1, 3.10-2, and 3.10-0. These pages correct typographical errors on our original submittal.

Should you or your staff have any'additional questions, please contact us.

Very truly yours,

3. W. Williams, jr.

Group Vice President Nuclear Energy 3W W/PLP/js Attachment cc: Dr. J. Nelson Grace, Region II Harold F. Reis, Esquire Lyle Jerrett, Administration Radiological Health Services Dept. of Health R Rehabilitative Services 1323 Winewood Boulevard Tallahassee, FL 32301 PNS-LI-85-88p 850402029b 850328 PDR ADOCK 05000250 P PDR PEOPLE... SERVING PEOPLE

ATTACHMENT Re: Turkey Point Units 3 and 0 Docket Nos. 50-250 and 50-251 Proposed License Amendment Containment Inte rit The following discussion is provided to support FPL's conclusion that the changes in our Proposed License Amendment for Containment Integrity dated 3anuary 28, 1985 do not represent a significant safety hazard, and that operation of the facility in accordance with the proposed amendment would not:

'(1) Involve a significant increase in the probability or consequences of an accident previously evaluated; or (2) Create the possibility of a new or different kind of accident from any accident previously evaluated; or (3) Involve a significant reduction in a margin of safety.

The examples mentioned with the following items refer to Examples of Amendment That Are Considered Not Likely to Involve Significant Hazards Considerations as

. published in the Federal Register on April 6, 1983.

Table 1.1, Definitions 1.8, 1.9, and 1.36. Mode Definitions The addition of Operational Modes as described in the STS is similar to example ii. These changes add MODE definition to the area between the current hot shutdown and cold shutdown and therefore constitute an additional control not presently included in technical specifications.

Specification 1.5 Definition of Containment Integrity This change is made to achieve consistency with proposed specification 3.3.1 and the STS and is therefore an administrative change and similar to example Specification 3.0 Limiting Conditions for Operation-Applicability The addition of proposed specification 3.02, 3.03, and 3.00 are changes similar to example ii in that they add additional limitations, restrictions or controls not presently included in the technical specifications.

Specification 3.3.1 Containment Integrity The proposed specification is a format change only, except for the footnote.

The current specification, 3.3.l.a, requires containment integrity except in cold shutdown as does the proposed specification 3.3.1. Because this portion is a reformatting it is similar to example i. The second portion of the current specification, 3.3.1.b concerns containment integrity with the reactor vessel head removed. In the current specification, containment integrity is required when the vessel head is removed and the reactor is not in refueling shutdown condition (10% subcritical and Tave<160 ). The 1st note to the Action statement in proposed specification 3.10.8 requires that the reactor be maintained in MODE 6 (IOFo subcritical and Tave( 100oF) whenever there is fuel in the reactor and the vessel head closure bolts are less than fully tensioned on with the head removed. This proposed specification eliminates the need for the containment integrity requirements of current specification 3.3.1.b as this condition mentioned in the current specification will not be allowed. Because the MODE 6 requirements are stricter and the proposed specification will apply to the case where the vessel head closure bolts are less than fully tensioned, this change constitutes an additional limitation, restriction or control and is similar to example ii.

The exception note to allow for testing of valves is similar to the STS note to Table 3.6-1 (Containment Isolation Valves). This change is being requested in response to a commitment to USNRC, Region II as described in Inspection Reports 250-80-27 and 251-80-28. This change does not involve a significant increase. in the probability or consequences of an accident previously evaluated because the opening of those valves under administrative controls could not cause an accident that has been previously evaluated, and because the administrative controls will ensure that the valves are quickly shut, should a previously evaluated accident occur, the consequences of the accident should not be significantly increased. This change does not create the possibility of a new or different kind of accident from any accident previously evaluated because the opening of the valves under administrative controls cannot cause an accident. This change does not involve a significant reduction in a margin of safety because the administrative controls will ensure the valves and quickly shut in the event they are required.

Specification 3.3.2 Internal Pressure This change is made to adopt the Standard Technical Specifi'cation.(STS) requirements for internal pressure. Because this change adds the requirements in Mode 0 and because it can require eventually going to cold shutdown, it constitutes an additional limitation, restriction or control not presently included in th'e technical specification and is therefore similar to example ii.

Specification 3.3.3 Containment Isolation Valves The LCO of this specification and applicability are changes in format to use the definition of MODES. This portion of the change is purely administrative to achieve consistency throughout the technical specifications and is similar to example i. The Action statement of the proposed specification is added for clarification and operational flexibility in the event of an inoperable contain-ment isolation valve. By adding the STS Action statement, the specifications are made clearer because there is no specified requirements for action required in the current specification, as current specification 3.0.1 does not specifically apply to this LCO. Because this change constitutes an additional limitation, restriction or control not presently included in the technical specifications, it is similar to example ii.

Specification 3.3.0 Containment Airlocks This specification is added in the STS format as a new specification. Because it adds an addition limitation, restriction or control not presently included in "the technical specifications, this change is similar to example ii.

Specification 3.0.1 f and g Engineered Safety Features These specifications are moved from the Engineered Safety Features section to the Refueling section of the specifications as in the STS. This change is an administrative change to achieve consistency throughout the technical specifications and is similar to example i.

Specif ication 3.10.1 Containment Building Penetrations This change is a format change to adopt the STS wording except for the exception note concerning testing of the valves. Because this change places minimum requirements on the securing of the equipment door it constitutes an additional limitation, restriction or control not presently included in the technical specifications and this portion of the change is similar to example ii. The exception to allow opening of valves for testing was discussed above for proposed specification 3.3.1.

Specification 3.10.2 Containment Ventilation. Isolation System This change does not alter the current requirements in that the containment ventilation isolation system must be OPERABLE during core alteration This is a format change to achieve consistency of STS format in the technical specifications and is similar to example i.

Specification 3.10.3 Instrumentation This change adds the STS action statement including the additional require-ment to determine boron concentration. Because this change constitutes an additional limitation, restriction or control not presently included in the technical specifications, it is similar to example ii.

0

~

Specification 3.10.0 Radiation Monitoring This change adapts a portion of current specification 3.10.2 to the STS format, and deletes current specification 3.10.3. The deletion of specification 3.10.3 eliminates duplicate, unclear requirements. The monitoring of radiation levels in containment and the spent fuel storage areas are addressed by proposed specifications 3.10.0 and by current specification Table 3.5-3, Table 3 5 Oy Table 3.5-5, and Table 3.9-3. The addition of specific action statements from STS 3.3.3.1, Table 3.3-6 adds additional limitation, restriction or controls not presently included and is therefore similar to example ii.

Specification 3.10.5 Decay Time This change adopts the format and wording of the STS without changing the requirements and is a purely admiriistrative change similar to example i.

Specif ication 3.10.6 Communications This change adopts the format and wording of the STS without changing the requirements and is a purely administrative change similar to example i.

Specification 3.10.7 Residual Heat Removal and Coolant Circulation This change adopts the STS format, moves the requirements from current specification 3.0.1f and g to the Refueling section and includes additional requirements which are more restrictive than the current specification.

Because this change constitutes an additional limitation, restriction or control not presently included in the technical specification, it is similar to example ii.

Specification 3.10.8 Boron Concentration This change adopts the STS format and applicable wording, which adds additional requirements concerning action to be taken. Because this change constitutes additional limitations, restrictions or controls not presently included in the technical specification it is similar to example ii.

Specification 3.10.9 Crane Travel - Spent Fuel Storage Area This change adopts the STS format, and is purely administrative in nature.

The change is therefore similar to example i.

Specification 3.12 Cask Handling This is purely an administrative change to change a reference which was modified by the change discussed above in proposed specification 3.10.9.

Because the change is purely administrative to achieve consistency throughout the technical specification, this change is similar to example i.

Turkey Point Units 3 an 4 Docket Nos. 50-250 and 50-251 Containment Inte rit EXPLANATION OF REQUESTED CHANGES This section is revised to supersede our present 3.0.1, with the STS 3.0.1, 3.0.2 3.0.3 and 3.0A. Our present 3.0.2 is kept and renumbered to be 3.0.5.

These changes are deemed necessary in order to facilitate our conversion to MODES of operation and subsequent STS format. In addition, these changes offer additional clarification of LCO applicability and action requirements.

a Section 3.3.1: Containment Integrity This section is modified to reflect STS except for the requested exception to be able to breach containment integrity by opening certain valves and/or airlocks under administrative controls in order to perform surveillance or testing requirements. This exception request is in compliance with a commitment made to NRC Region II Inspector, C. M. Hosey, as described in Inspection Report 250-80-27 and 251-80-28.

Similarly, STS Table 3.6-1 offers the ability of opening certain containment isolation valves on an intermittent basis under administrative control.

Section 3.3.2: Internal Pressure This section is modified to adopt STS format and add applicability and action statements.

The STS action statement for this specification is more conservative than our present one, and it is being adopted in this change.

Section 3.3.3: Containment Isolation Valves This section is modified to adopt the STS format. The applicability modes are added and and the action statements from STS are adopted, which offers further clarification and operational flexibilityupon discovery of inoperable containment isolation valves.

Section 3.3.0: Containment Air Locks This section is adopted as a new specification, which is not presently contained in our specifi-cations. This change is deemed necessary to place restrictions and action statements to be invoked in case of discovering a containment air lock inoperable.

~Pa e 3.0-3 This page is modified to delete the specifications for coolant loops operability in refueling shutdown and transfer themto Section 3.10. This is done in order to organize our Technical Specifications in a more efficient manner.

Section 3.10: Refueling Operations 3.10.1: Containment Building Penetrations

'ection This section is modified to adopt the STS format except for the requested exeption, to be able to breach containment integrity by opening certain valves and/or airlocks under administrative controls in order to perform surveillance or testing requirements. This exception request is in compliance with a commitment made to NRC Region II Inspector, C. M. Hosey, as described in Inspection Report 250-80-27 and 251-80-28.

This'hange also contains the addition of applicability and action statements, which are being adopted from STS.

Section 3.10.2: Containment Ventilation Isolation System This section is modified to adopt the STS format. Applicability and action statements are also adopted from STS. This change offers operational flexibility and restrictions to be invoked at refueling conditions.

Section 3.10.3: Instrumentation This section is modified to adopt the STS format. The present specification is not altered, only the addition of applicability and action statements are adopted from STS.

Section 3.10.0: Radiation Monitoring This section is modified to adopt the STS format. The present specification is not altered, only the addition of applicability and action statements are adopted from STS.

Section 3.10 5: Decay Time This section is modified to adopt the STS format. The applicability and action statements are included from present Technical Specifications and are in compliance with STS.

Section 3.10.6: Communications This section is modified to adopt the STS format. The applicability and action statements are included from present Technical Specifications and are in compliance with STS.

Section 3.10.7: RHR and Coolant Circulation This section i's modified to adopt the STS format. Two subsections are presented to further separate specifications for high water and low water levels in the reactor vessel. The appli-cability and action statements are adopted from STS and are more conservative than our present specifications. This change is deemed'ecessary to offer operational flexibility and restrictions to be invoked for residual heat removal at refueling conditions.

Section 3.10.8: Boron Concentration This section is modified to adopt STS format. The specification, applicability and action statements are those in STS, which are more restrictive than our present, Section 3.10.9: Crane Travel - Spent Fuel Storage Areas This section is modified to adopt the STS format. The specification, applicability and,action statements are from our present Technical Specifications and are identical to STS.

Section 3.12: Cask Handling This section is modified only to reflect the new reference number to be TS 3.10.9. No format changes are being made.

Section B3.0:

Subsections B3.0.1, B3.0.2, B3.0.3 and B3.0.0 are adopted from STS in order to support the proposed philosopy of MODES of operation. The only change is made in B3.0.1, where the hours are changed to reflect our present LCOs.

Subsection B3.0.5 is a carryover from our present Bases, with no changes.

Section B.3.3.1: Containment Integrity This section is adopted from STS and was not specifically contained in our present Bases.

This proposed change does not represent a deviation from the FSAR.

Section B.3.3.2: Internal Pressure This section is a carryover from our present Bases, except for a change made to the contain-ment design pressure from 55 psig to 59 psig to be consistent with our FSAR, Section 5.1.1.

Section B.3.3.3:- Containment Isolation Valves.

This section is adopted from STS and was not specifically addressed in our current Bases.

The GDC numbers were left out and will be included as=part of our STS conversion project.

This change does not represent a deviation from the FSAR.

Section B3.3.0: Containment Air Locks This section is adopted from STS and was specifically addressed in our current Bases. This proposed change does not represent a deviation from the FSAR.

Section B.3.10: Refueling Operations Section B3.10.1: Containment Building Penetrations This section is adopted from STS and was not specifically addressed in our current Bases.

This change does not represent a deviation from our FSAR.

Section B.3.10.2: Containment Ventilation Isolation This section is adopted from STS and was not specifically addressed in our current Bases.

This change does not represent a deviation from our FSAR. The title of this section i' different from STS and is necessary in order to maintain consistency with presently used terminology and documents.

Section B3.10.3: Instrumentation This section is adopted from STS and was not specifically addressed in our current Bases.

This change does not represent a deviation from our FSAR.

Section B3.104 This section is included to be consistent with our Technical Specifications format, and is not necessarily covered by STS under Refueling Operations.

Section B3.10.5: Decay Time Section B3.10.6: Communications These sections are adopted from STS and our present Bases do contain similar statements, to the ones being proposed. These changes do not represent a deviation from our FSAR.

Section B3.10.7: RHR and Coolant Circulation This section is a carry over from our present Bases and it is addressed in Page B3.l.la of our Technical Specifications. These Bases are presented in this section to be consistent with our format.

Section B3.10.8: Boron Concentration This section is adopted from STS and our present Bases do contain similar statements to the ones being proposed. The changes made from STS are values consistent with our FSAR.

Section B3.10.9: Crane Travel -'Spent Fuel Storage Areas This section is a carryover from our present Bases, which is compliance with STS.

Retrieved from "https://kanterella.com/w/index.php?title=ML17346A918&oldid=2423486"