ML062090498

From kanterella
Jump to navigation Jump to search

Email: (PA) Bolting Integrity Program
ML062090498
Person / Time
Site: Pilgrim
Issue date: 05/05/2006
From: Wen P
NRC/NRR/ADRO/DLR
To: Jennifer Davis
Office of Nuclear Reactor Regulation
References
%dam200612, TAC MC9669
Download: ML062090498 (2)


Text

James Davis - Re: Bolting Int9grityPrograrn Jam es. .. Davis- -....Re:..Bolting...

.. ntegrity. Program l ,P ,age 1 From: Peter Wen To: James Davis Date: Fri, May 5, 2006 1:14 PM

Subject:

Re: Bolting Integrity Program Jim, Since bolting integrity is yours, could you get back to them.

Peter

>>> <erachp@comcast.net> 05/05/06 1:06 PM >>>

Wayne, PNPS does not have a bolting program. However, I believe NRC is requesting them to submit one. I do not know where they are with this. By copy of this maybe Peter or Jim can advise.

For SS bolting, there will not be LOM due to corrosion, however, for loss of pre-load, if in your experience or there is a past precedent where NRC asked an RAI on this subject, then we will have to address it.

Erach

- ------------- Original message-------

From: wapavinich @comcast.net

> I need a little help here. PNPS says that the Bolting Integrity Program is not

" applicable. Bolting AEs are handle through other programs. However, stainless

" steel bolting in ESF systems are assigned no AEs although loss of preload is

" plausible. Will PNPS be required to have a bolting integrity program? Should

" loss of preload be captured for stainless steel bolting?

> Wayne

c:\temp\GW)00001.TMP Pýage 1 c:\ternp\GW}OOO0i.TM P Page 1~

Mail Envelope Properties (445B87F3.207: 20: 35420)

Subject:

Re: Bolting Integrity Program Creation Date Fri, May 5, 2006 1:14 PM From: Peter Wen Created By: PXW@nrc.gov Recipients OWGWPO01.HQGWDO01 JAD (James Davis)

Post Office Route OWGWPO01.HQGWDO01 Files Size Date & Time MESSAGE 2301 Friday, May 5, 2006 1:14 PM Options Expiration Date: None Priority: Standard ReplyRequested: No Return Notification: None Concealed

Subject:

No Security: Standard Junk Mail Handling Evaluation Results Message is not eligible for Junk Mail handling Message is from an internal sender Junk Mail settings when this message was delivered Junk Mail handling disabled by User Junk Mail handling disabled by Administrator Junk List is not enabled Junk Mail using personal address books is not enabled Block List is not enabled