ML20211D644

Notifies That Callaway Thermal/Hydraulic Design Parameters Will Be Withheld from Public Disclosure Under 10CFR2.790(b)(5) & Section 103(b) of Atomic Energy Act of 1954,as Amended,Per 860218 Request & 860512 Affidavit

ML20211D644
Person / Time
Site:	Callaway
Issue date:	06/10/1986
From:	Youngblood B Office of Nuclear Reactor Regulation
To:	Wiesemann R WESTINGHOUSE ELECTRIC COMPANY, DIV OF CBS CORP.
References
NUDOCS 8606130019
Download: ML20211D644 (2)

Text

__

8 'o

~g UNITED STATES l n NUCLEAR REGULATORY COMMISSION

, 5 j WASHINGTON, D. C. 20555

%.....+' 10 JUN 1386 Docket No.: 50-483 Mr. R. A. Wiesemann, Manager Regulatory and Legislative Affairs Westinghouse Electric Corporation P. O. Box 355 Pittsburgh, Pennsylvania 15230

Subject:

Request for Withholding Infomation From Public Disclosure By letter dated February 18, 1986, Union Electric Company submitted "Callaway Thermal / Hydraulic Design Parameters," and requested that they be withheld from public disclosure pursuant to 10 CFR 2.790. Your appliation and affidavit dated May 12, 1986, supported that request. (

You stated that the submitted infomation should be considered exempt from mandatory public disclosure for the following reasons:

1. The information sought to be withheld from public disclosure is owned and has been held in confidence by Westinghouse.

't

2. The information is of a type customarily held in confidence by Westing-house and not customarily disclosed to the public.

3. The information was transmitted to the Comission in confidence.

4. The information is not available in public sources.

5. Public disclosure of this information concerning design procedures would cause substantial ham to the competitive position of Westinghouse be-cause competitors could utilize this information to assess and justify their own designs without comensurate expense.

We have reviewed your application and the material based on the requirements and criteria of 10 CFR 2.790 and, on the basis of your statements, have deter-mined that the submitted information sought to be withheld contains trade secrets or proprietary comercial infomation.

Therefore, the "Callaway Thermal / Hydraulic Design Parameters," marked as proprietary will be withheld from public disclosure pursuant to 10 CFR 2.790 (b)(5) and Section 103(b) of the Atomic Energy Act of 1954, as amended.

8606130019 860610 PDR ADOCK 05000483 p PDR

__ ~ __

10 Jun 1989 Withholding from public inspection shall not affect the right, if any, of per-sons properly and directly concerned to inspect the documents. If the need arises, we may send copies of this information to our consultants working in this area. We will, of course, insure that the consultants have signed the appropriate agreements for handling proprietary information.

If the basis for withholding this information from public inspection should change in the future such that the information could then be made available for public inspection, you should promptly notify the NRC. You should also understand that the NRC may have cause to review this determination in the future, such as if the scope of a Freedom of Information Act request includes your information. In all review situations, if the NRC needs additional information from you or makes a detennination adverse to the above, you will be notified in advance of any public disclosure.

Sincerely,

\1 B. J. Youngblood, Director PWR Project Directorate #4 Division of PWR Licensing-A DISTRIBUTION:

. pocket r11e.

^NRC PDR

Local PDR NSIC PRC System PWR!4 Rdg MDuncan P0'Connor bVf flY PWR(4/pjPR-A MDuncMTmac PWRf4/DPWR-A P0'Connor PWR#4/DPWR-A

.[n BJYoungblood

'LQ 06/j/86 06/ f /86 06/ f /86 bf b