ML18040A749: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:%'C'aPennsylvania Power8LightCompanyTwoNorthNinthStreet~Allentown, PA18101~215/770.5151 NormanW.CurtisVicePresident-Engineering 6Construction-Nuclear 215/770-7501 DEC61984DirectorofNuclearReactorRegulation Attention:
{{#Wiki_filter:%'C'a Pennsylvania Power 8 Light Company Two North Ninth Street~Allentown, PA 18101~215/770.5151 Norman W.Curtis Vice President-Engineering 6 Construction-Nuclear 21 5/770-7501 DEC 6 1984 Director of Nuclear Reactor Regulation Attention:
Mr.A.Schwencer, ChiefLicensing BranchNo.2DivisionofLicensing U.S.NuclearRegulatory Commission Washington, DC20555SUSQUEHANNA STEAMELECTRICSTATIONPROPOSEDAMENDMENTS 57TOLICENSENPF-14AND12TOLICENSENPF-22ER100450PLA-2370DocketNos.50-38750-388
Mr.A.Schwencer, Chief Licensing Branch No.2 Division of Licensing U.S.Nuclear Regulatory Commission Washington, DC 20555 SUSQUEHANNA STEAM ELECTRIC STATION PROPOSED AMENDMENTS 57 TO LICENSE NPF-14 AND 12 TO LICENSE NPF-22 ER 100450 PLA-2370 Docket Nos.50-387 50-388  


==DearMr.Schwencer:==
==Dear Mr.Schwencer:==


Thepurposeofthisletteristoproposeamendments totheSusquehanna SESUnit1andUnit2Technical Specifications inordertoavoidtheforcedshutdownofUnit2duringtheUnit1firstrefueling outage.PROBLEM:SSESUnit2currently dependsoncertainUnit1125-voltbatteries tosupportcommonloads;theseUnit1batteries aretherefore listedintheUnit2LCOsonDCsystems.SinceUnit1batteryloadprofiletestingmustbeperformed duringthefirstrefueling outage,anACTIONstatement mustbeenteredintheUnit2Technical Specifications.
The purpose of this letter is to propose amendments to the Susquehanna SES Unit 1 and Unit 2 Technical Specifications in order to avoid the forced shutdown of Unit 2 during the Unit 1 first refueling outage.PROBLEM: SSES Unit 2 currently depends on certain Unit 1 125-volt batteries to support common loads;these Unit 1 batteries are therefore listed in the Unit 2 LCOs on DC systems.Since Unit 1 battery load profile testing must be performed during the first refueling outage, an ACTION statement must be entered in the Unit 2 Technical Specifications.
TherequiredtestingwillforcetheshutdownofUnit2,sinceitcannotbeperformed withinthetwohoursallottedintheACTIONstatement.
The required testing will force the shutdown of Unit 2, since it cannot be performed within the two hours allotted in the ACTION statement.
PROPOSEDSOLUTION:
PROPOSED SOLUTION: A single line diagram of Channel"A" of the Unit 1 125-volt DC system is provided in Figure 1.PP&L has developed a.common load transfer scheme which will allow common loads to be powered from a 125-volt DC source on either unit through the use of manual transfer switches (see Figure 2).In several cases, the individual feeder breakers supply not only a common load, but: also a Unit 1 load (See Figure 3).Therefore, once the loads have been transferred to the Unit 2'source, the Unit 1 loads (hereinafter called"tag along loads")will be energized from a Unit 2 source.In the revised design, non-Class 1E loads will usually be transferred between two different Unit 1 sources;some will be transferred between Unit 1 and Unit 2 sources.In order to maintain division/channel separation all Class 1E loads being transferred to support the transfer of common loads (again, this includes some tag along loads)will be transferred between the Unit 1 and corresponding Unit 2 battery.80i2i80b2i 84i20b PDR ADOCK 05000l387 P PDR Al gC~+four jP t l4 j rill rrf M ll'M r r' Hl Page 2 SSES PLA-2370 ER 100450 File 841-8 Hr.A.Schwencer PROPOSED TECHNICAL SPECIFICATION CHANGES: A mark-up of the changes needed to support the proposed revised design is attached.For t'e Unit 1 specifications, the following changes were made: pages 3/4 8-10: The Unit 2 batteries, from which common and tag along loads may now be powered, are added to the LCO.A footnote is provided to remove them as an LCO requirement under situations when they are not supporting Unit 1 operation.
AsinglelinediagramofChannel"A"oftheUnit1125-voltDCsystemisprovidedinFigure1.PP&Lhasdeveloped a.commonloadtransferschemewhichwillallowcommonloadstobepoweredfroma125-voltDCsourceoneitherunitthroughtheuseofmanualtransferswitches(seeFigure2).Inseveralcases,theindividual feederbreakerssupplynotonlyacommonload,but:alsoaUnit1load(SeeFigure3).Therefore, oncetheloadshavebeentransferred totheUnit2'source,theUnit1loads(hereinafter called"tagalongloads")willbeenergized fromaUnit2source.Inthereviseddesign,non-Class 1Eloadswillusuallybetransferred betweentwodifferent Unit1sources;somewillbetransferred betweenUnit1andUnit2sources.Inordertomaintaindivision/channel separation allClass1Eloadsbeingtransferred tosupportthetransferofcommonloads(again,thisincludessometagalongloads)willbetransferred betweentheUnit1andcorresponding Unit2battery.80i2i80b2i 84i20bPDRADOCK05000l387 PPDRAlgC~+fourjP tl4jrillrrfMll'Mrr' HlPage2SSESPLA-2370ER100450File841-8Hr.A.Schwencer PROPOSEDTECHNICAL SPECIFICATION CHANGES:Amark-upofthechangesneededtosupporttheproposedreviseddesignisattached.
ACTION a was revised to affect Unit 1 equipment only.ACTION b is provided on insert A to cover the common and tag along load transfer in the event that a Unit 2 battery supporting Unit 1 operation is inoperable.'CTION;c is provided, to cover the realignment of Unit 1 loads to,their normal Unit 1 source once that source has been restored to OPERABLE status.Finally, ACTION b has been relettered.
Fort'eUnit1specifications, thefollowing changesweremade:pages3/48-10:TheUnit2batteries, fromwhichcommonandtagalongloadsmaynowbepowered,areaddedtotheLCO.AfootnoteisprovidedtoremovethemasanLCOrequirement undersituations whentheyarenotsupporting Unit1operation.
P"I 4 o page 3/4 8-11: ACTION c has been relettered.
ACTIONawasrevisedtoaffectUnit1equipment only.ACTIONbisprovidedoninsertAtocoverthecommonandtagalongloadtransferintheeventthataUnit2batterysupporting Unit1operation isinoperable.'CTION;c isprovided, tocovertherealignment ofUnit1loadsto,theirnormalUnit1sourceoncethatsourcehasbeenrestoredtoOPERABLEstatus.Finally,ACTIONbhasbeenrelettered.
o page 3/4 8-12: The load profile for the Unit 1 Channel"B" battery has been revised to provide margin for future load additions,'should they occur.Insert B provides the load profiles for the Unit 2 batteries that are now required by the revised LCO.o page 3/4 8-15: See discussion for page 3/4 8-10.o page 3/4 8-16: ACTIONS c and d have been relettered.
P"I4opage3/48-11:ACTIONchasbeenrelettered.
o page 3/4 8-17: As on 3/4 8-10, required Unit 2 equipment has been added to the LCO with a footnote to govern when it is required to support Unit 1 operation.
opage3/48-12:TheloadprofilefortheUnit1Channel"B"batteryhasbeenrevisedtoprovidemarginforfutureloadadditions,
o page 3/4 8-18: See above discussion on 3/4 8-17.Also, as discussed on 3/4 8-10 for sources, appropriate ACTION statements have been proposed on insert D for the affected DC load groups.o page 3/4 8-20: See discussion on 3/4 8-17.o page 3/4 8-21: "And/or" has been revised to just"or" for consistency with the LCO requirement on page 3/4 8-20.Insert E is provided again for controls over common load transfer and restoration of normal alignment.
'shouldtheyoccur.InsertBprovidestheloadprofilesfortheUnit2batteries thatarenowrequiredbytherevisedLCO.opage3/48-15:Seediscussion forpage3/48-10.opage3/48-16:ACTIONScanddhavebeenrelettered.
For the Unit 2 specifications similar changes were made to each section.The only significant differences are on the inserts (A through E)which provide one, not two ACTION statements.
opage3/48-17:Ason3/48-10,requiredUnit2equipment hasbeenaddedtotheLCOwithafootnotetogovernwhenitisrequiredtosupportUnit1operation.
The ACTION statement provided is different than the first ACTION on each Unit 1 insert in that it does not apply to any Unit 1 (tag along)loads.This is because Unit 2 requires only the common loads to support its operation.
opage3/48-18:Seeabovediscussion on3/48-17.Also,asdiscussed on3/48-10forsources,appropriate ACTIONstatements havebeenproposedoninsertDfortheaffectedDCloadgroups.opage3/48-20:Seediscussion on3/48-17.opage3/48-21:"And/or"hasbeenrevisedtojust"or"forconsistency withtheLCOrequirement onpage3/48-20.InsertEisprovidedagainforcontrolsovercommonloadtransferandrestoration ofnormalalignment.
The second ACTION proposed in the Unit 1 inserts covers the restoration of the normal Unit 1 alignment with respect to unitized loads.Since no Unit 2 loads C 1 il'i f m t 1L II I""I I'I DEC 6 1984 Page 3 SSES PLA-2370 ER 100450 File 841-8 Mr.A.Schwencer are being transferred due to this change, such an ACTION is not required in the Unit 2 specifications.
FortheUnit2specifications similarchangesweremadetoeachsection.Theonlysignificant differences areontheinserts(AthroughE)whichprovideone,nottwoACTIONstatements.
NO SIGNIFICANT HAZARDS CONSIDERATIONS:
TheACTIONstatement providedisdifferent thanthefirstACTIONoneachUnit1insertinthatitdoesnotapplytoanyUnit1(tagalong)loads.ThisisbecauseUnit2requiresonlythecommonloadstosupportitsoperation.
I.The proposed changes do not involve a significant increase in the probability or consequences of an accident previously evaluated, for the following reasons: Each unit has four independent 125-volt DC power sources.The FSAR analysis shows that a unit can be safely shut down with any one 125-volt DC power source disabled (Section 8.3).Based on the revised design, one 125-volt DC source would fail due to a fault in a Unit 1 tag along load if both upstream protective devices (fuse and distribution panel breaker)failed.The more likely result of a fault on a Unit 1 tag along load would be loss of an individual circuit.Therefore, the most probable failure is less severe than the loss of an entire power source, which has been previously evaluated.
ThesecondACTIONproposedintheUnit1insertscoverstherestoration ofthenormalUnit1alignment withrespecttounitizedloads.SincenoUnit2loads C1il'ifmt1LIII""II'I DEC61984Page3SSESPLA-2370ER100450File841-8Mr.A.Schwencer arebeingtransferred duetothischange,suchanACTIONisnotrequiredintheUnit2specifications.
Finally, the Unit 2 batteries have been analyzed and do have sufficient stored energy to operate all necessary loads for the design basis interval of four hours, after loss of AC power and assuming the loss of the battery charger.II.The proposed changes do not create the possibility of a new or different kind of accident from any accident previously evaluated.
NOSIGNIFICANT HAZARDSCONSIDERATIONS:
As stated above, the probable failure as a result of the revised design is within the bounds of the previous FSAR analysis, and battery capacity is sufficient to meet design commitments.
I.Theproposedchangesdonotinvolveasignificant increaseintheprobability orconsequences ofanaccidentpreviously evaluated, forthefollowing reasons:Eachunithasfourindependent 125-voltDCpowersources.TheFSARanalysisshowsthataunitcanbesafelyshutdownwithanyone125-voltDCpowersourcedisabled(Section8.3).Basedonthereviseddesign,one125-voltDCsourcewouldfailduetoafaultinaUnit1tagalongloadifbothupstreamprotective devices(fuseanddistribution panelbreaker)failed.ThemorelikelyresultofafaultonaUnit1tagalongloadwouldbelossofanindividual circuit.Therefore, themostprobablefailureislessseverethanthelossofanentirepowersource,whichhasbeenpreviously evaluated.
Therefore no new or different possibility exist.III.The proposed changes do not involve a significant reduction in a margin of safety.Based on the existence of sufficient battery capacity, the increased reliability of Unit 1 due to continuity of p'ower, and the fact that the worst case failure due to the new design is consistent with previous analysis, one can conclude that the existing margin of safety has not been reduced.Based upon the considerations presented above, this change appears to fall under an example as stated in 48FR14870, Column 3, paragraph (vi).PPSL does note that this change presents a deviation from our previous FSAR commitments to Regulatory Guide 1.81, and upon approval of this change we will take the appropriate steps to revise the FSAR accordingly.  
Finally,theUnit2batteries havebeenanalyzedanddohavesufficient storedenergytooperateallnecessary loadsforthedesignbasisintervaloffourhours,afterlossofACpowerandassumingthelossofthebatterycharger.II.Theproposedchangesdonotcreatethepossibility ofanewordifferent kindofaccidentfromanyaccidentpreviously evaluated.
~>~~V'I DEC 6 1984 Page 4 SSES PLA-2370 ER 100450 File 841-8 Mr.A.Schwencer IMPLEMENTATION SCHEDULE: As stated at the beginning of this proposal, the most immediate problem which is being avoided as a result of this change is the shutdown of Unit 2 during the Unit 1 first refueling outage.Therefore, it is imperative that PP&L receive approval of the proposed change prior to or very early into the outage so that battery load profile testing can proceed on schedule and as a result of this modification, not force the shutdown of Unit 2.The appropriate fees pursuant t'o 10CFR170.22 have been enclosed.Any questions on this matter should be directed to Mr.R.Sgarro at (215)770-7855.We are willing to meet with you at your convenience to further discuss this matter.Very truly ours, N.W.Curtis Vice President-Engineering
Asstatedabove,theprobablefailureasaresultofthereviseddesigniswithintheboundsofthepreviousFSARanalysis, andbatterycapacityissufficient tomeetdesigncommitments.
&Construction-Nuclear Enclosures cc: M.J.Campagnone US NRC R.H.Jacobs US NRC T.M.Gerusky, Director Bureau of Radiation Protection Pa.Dept.of Environmental Resources P.0.Box 2063 Harrisburg, PA 17120 4~P H~I H\P~'!I I I e H T H I''gt t;*r e r HT~p"'ll P PI~I~~I'~~~Hl P~r~P I e d IP}}
Therefore nonewordifferent possibility exist.III.Theproposedchangesdonotinvolveasignificant reduction inamarginofsafety.Basedontheexistence ofsufficient batterycapacity, theincreased reliability ofUnit1duetocontinuity ofp'ower,andthefactthattheworstcasefailureduetothenewdesignisconsistent withpreviousanalysis, onecanconcludethattheexistingmarginofsafetyhasnotbeenreduced.Basedupontheconsiderations presented above,thischangeappearstofallunderanexampleasstatedin48FR14870, Column3,paragraph (vi).PPSLdoesnotethatthischangepresentsadeviation fromourpreviousFSARcommitments toRegulatory Guide1.81,anduponapprovalofthischangewewilltaketheappropriate stepstorevisetheFSARaccordingly.  
~>~~V'I DEC61984Page4SSESPLA-2370ER100450File841-8Mr.A.Schwencer IMPLEMENTATION SCHEDULE:
Asstatedatthebeginning ofthisproposal, themostimmediate problemwhichisbeingavoidedasaresultofthischangeistheshutdownofUnit2duringtheUnit1firstrefueling outage.Therefore, itisimperative thatPP&Lreceiveapprovaloftheproposedchangepriortoorveryearlyintotheoutagesothatbatteryloadprofiletestingcanproceedonscheduleandasaresultofthismodification, notforcetheshutdownofUnit2.Theappropriate feespursuantt'o10CFR170.22 havebeenenclosed.
Anyquestions onthismattershouldbedirectedtoMr.R.Sgarroat(215)770-7855.
Wearewillingtomeetwithyouatyourconvenience tofurtherdiscussthismatter.Verytrulyours,N.W.CurtisVicePresident-Engineering
&Construction-Nuclear Enclosures cc:M.J.Campagnone USNRCR.H.JacobsUSNRCT.M.Gerusky,DirectorBureauofRadiation Protection Pa.Dept.ofEnvironmental Resources P.0.Box2063Harrisburg, PA17120 4~PH~IH\P~'!IIIeHTHI''gtt;*rerHT~p"'llPPI~I~~I'~~~HlP~r~PIedIP}}

Revision as of 03:11, 6 July 2018

Forwards Applications for Proposed Amends 57 & 12 to Licenses NPF-14 & NPF-22,respectively.Amends Change Tech Specs to Separate Unit 1 & 2 Battery Loads to Avoid Forced Shutdown of Unit 2 During Unit 1 Refueling Outage
ML18040A749
Person / Time
Site: Susquehanna  Talen Energy icon.png
Issue date: 12/06/1984
From: CURTIS N W
PENNSYLVANIA POWER & LIGHT CO.
To: SCHWENCER A
Office of Nuclear Reactor Regulation
Shared Package
ML17139C742 List:
References
PLA-2370, NUDOCS 8412180621
Download: ML18040A749 (8)


Text

%'C'a Pennsylvania Power 8 Light Company Two North Ninth Street~Allentown, PA 18101~215/770.5151 Norman W.Curtis Vice President-Engineering 6 Construction-Nuclear 21 5/770-7501 DEC 6 1984 Director of Nuclear Reactor Regulation Attention:

Mr.A.Schwencer, Chief Licensing Branch No.2 Division of Licensing U.S.Nuclear Regulatory Commission Washington, DC 20555 SUSQUEHANNA STEAM ELECTRIC STATION PROPOSED AMENDMENTS 57 TO LICENSE NPF-14 AND 12 TO LICENSE NPF-22 ER 100450 PLA-2370 Docket Nos.50-387 50-388

Dear Mr.Schwencer:

The purpose of this letter is to propose amendments to the Susquehanna SES Unit 1 and Unit 2 Technical Specifications in order to avoid the forced shutdown of Unit 2 during the Unit 1 first refueling outage.PROBLEM: SSES Unit 2 currently depends on certain Unit 1 125-volt batteries to support common loads;these Unit 1 batteries are therefore listed in the Unit 2 LCOs on DC systems.Since Unit 1 battery load profile testing must be performed during the first refueling outage, an ACTION statement must be entered in the Unit 2 Technical Specifications.

The required testing will force the shutdown of Unit 2, since it cannot be performed within the two hours allotted in the ACTION statement.

PROPOSED SOLUTION: A single line diagram of Channel"A" of the Unit 1 125-volt DC system is provided in Figure 1.PP&L has developed a.common load transfer scheme which will allow common loads to be powered from a 125-volt DC source on either unit through the use of manual transfer switches (see Figure 2).In several cases, the individual feeder breakers supply not only a common load, but: also a Unit 1 load (See Figure 3).Therefore, once the loads have been transferred to the Unit 2'source, the Unit 1 loads (hereinafter called"tag along loads")will be energized from a Unit 2 source.In the revised design, non-Class 1E loads will usually be transferred between two different Unit 1 sources;some will be transferred between Unit 1 and Unit 2 sources.In order to maintain division/channel separation all Class 1E loads being transferred to support the transfer of common loads (again, this includes some tag along loads)will be transferred between the Unit 1 and corresponding Unit 2 battery.80i2i80b2i 84i20b PDR ADOCK 05000l387 P PDR Al gC~+four jP t l4 j rill rrf M ll'M r r' Hl Page 2 SSES PLA-2370 ER 100450 File 841-8 Hr.A.Schwencer PROPOSED TECHNICAL SPECIFICATION CHANGES: A mark-up of the changes needed to support the proposed revised design is attached.For t'e Unit 1 specifications, the following changes were made: pages 3/4 8-10: The Unit 2 batteries, from which common and tag along loads may now be powered, are added to the LCO.A footnote is provided to remove them as an LCO requirement under situations when they are not supporting Unit 1 operation.

ACTION a was revised to affect Unit 1 equipment only.ACTION b is provided on insert A to cover the common and tag along load transfer in the event that a Unit 2 battery supporting Unit 1 operation is inoperable.'CTION;c is provided, to cover the realignment of Unit 1 loads to,their normal Unit 1 source once that source has been restored to OPERABLE status.Finally, ACTION b has been relettered.

P"I 4 o page 3/4 8-11: ACTION c has been relettered.

o page 3/4 8-12: The load profile for the Unit 1 Channel"B" battery has been revised to provide margin for future load additions,'should they occur.Insert B provides the load profiles for the Unit 2 batteries that are now required by the revised LCO.o page 3/4 8-15: See discussion for page 3/4 8-10.o page 3/4 8-16: ACTIONS c and d have been relettered.

o page 3/4 8-17: As on 3/4 8-10, required Unit 2 equipment has been added to the LCO with a footnote to govern when it is required to support Unit 1 operation.

o page 3/4 8-18: See above discussion on 3/4 8-17.Also, as discussed on 3/4 8-10 for sources, appropriate ACTION statements have been proposed on insert D for the affected DC load groups.o page 3/4 8-20: See discussion on 3/4 8-17.o page 3/4 8-21: "And/or" has been revised to just"or" for consistency with the LCO requirement on page 3/4 8-20.Insert E is provided again for controls over common load transfer and restoration of normal alignment.

For the Unit 2 specifications similar changes were made to each section.The only significant differences are on the inserts (A through E)which provide one, not two ACTION statements.

The ACTION statement provided is different than the first ACTION on each Unit 1 insert in that it does not apply to any Unit 1 (tag along)loads.This is because Unit 2 requires only the common loads to support its operation.

The second ACTION proposed in the Unit 1 inserts covers the restoration of the normal Unit 1 alignment with respect to unitized loads.Since no Unit 2 loads C 1 il'i f m t 1L II I""I I'I DEC 6 1984 Page 3 SSES PLA-2370 ER 100450 File 841-8 Mr.A.Schwencer are being transferred due to this change, such an ACTION is not required in the Unit 2 specifications.

NO SIGNIFICANT HAZARDS CONSIDERATIONS:

I.The proposed changes do not involve a significant increase in the probability or consequences of an accident previously evaluated, for the following reasons: Each unit has four independent 125-volt DC power sources.The FSAR analysis shows that a unit can be safely shut down with any one 125-volt DC power source disabled (Section 8.3).Based on the revised design, one 125-volt DC source would fail due to a fault in a Unit 1 tag along load if both upstream protective devices (fuse and distribution panel breaker)failed.The more likely result of a fault on a Unit 1 tag along load would be loss of an individual circuit.Therefore, the most probable failure is less severe than the loss of an entire power source, which has been previously evaluated.

Finally, the Unit 2 batteries have been analyzed and do have sufficient stored energy to operate all necessary loads for the design basis interval of four hours, after loss of AC power and assuming the loss of the battery charger.II.The proposed changes do not create the possibility of a new or different kind of accident from any accident previously evaluated.

As stated above, the probable failure as a result of the revised design is within the bounds of the previous FSAR analysis, and battery capacity is sufficient to meet design commitments.

Therefore no new or different possibility exist.III.The proposed changes do not involve a significant reduction in a margin of safety.Based on the existence of sufficient battery capacity, the increased reliability of Unit 1 due to continuity of p'ower, and the fact that the worst case failure due to the new design is consistent with previous analysis, one can conclude that the existing margin of safety has not been reduced.Based upon the considerations presented above, this change appears to fall under an example as stated in 48FR14870, Column 3, paragraph (vi).PPSL does note that this change presents a deviation from our previous FSAR commitments to Regulatory Guide 1.81, and upon approval of this change we will take the appropriate steps to revise the FSAR accordingly.

~>~~V'I DEC 6 1984 Page 4 SSES PLA-2370 ER 100450 File 841-8 Mr.A.Schwencer IMPLEMENTATION SCHEDULE: As stated at the beginning of this proposal, the most immediate problem which is being avoided as a result of this change is the shutdown of Unit 2 during the Unit 1 first refueling outage.Therefore, it is imperative that PP&L receive approval of the proposed change prior to or very early into the outage so that battery load profile testing can proceed on schedule and as a result of this modification, not force the shutdown of Unit 2.The appropriate fees pursuant t'o 10CFR170.22 have been enclosed.Any questions on this matter should be directed to Mr.R.Sgarro at (215)770-7855.We are willing to meet with you at your convenience to further discuss this matter.Very truly ours, N.W.Curtis Vice President-Engineering

&Construction-Nuclear Enclosures cc: M.J.Campagnone US NRC R.H.Jacobs US NRC T.M.Gerusky, Director Bureau of Radiation Protection Pa.Dept.of Environmental Resources P.0.Box 2063 Harrisburg, PA 17120 4~P H~I H\P~'!I I I e H T H Igt t;*r e r HT~p"'ll P PI~I~~I'~~~Hl P~r~P I e d IP