ML19235A078: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
 
(Created page by program invented by StriderTol)
Line 16: Line 16:


=Text=
=Text=
{{#Wiki_filter:PRODUCT SELECTION GUIDE Industrial Insulation InsulThin HTHydrophobic Microporous Blanket InsulationAVAILABLE SHAPES AND SIZES Roll Size Roll Weight Dimensions 36" Wide 45lbs 10mm x 36" x 25' 5mm x 36" x 50' 60" Wide 75lbs 10mm x 60" x 25' 5mm x 60" x 50' THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.189   0.027200ºF / 93ºC 0.195 0.028400ºF / 204ºC 0.213 0.031600ºF / 316ºC 0.237 0.034SPECIFICATION COMPLIANCE ASTM C1676 Material Speci~cation - Passes ASTM C1617 Corrosion - Passes ASTM C665 Corrosivity to Steel - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
{{#Wiki_filter:PRODUCT SELECTION GUIDE Industrial Insulation
Passes ASTM E84 Surface Burning Characteristics - Flame Spread-0, Smoke Developed-0 For more information, refer to product data sheet IND-700 InsulThin HT is a high-temperature, hydrophobic, thin, exible, microporous blanket insulation. Microporous insulation is a highly ef~cient insulation material and has been in service in a variety of industrial and commercial insulation applications for more than 35 years.
 
AVAILABLE SHAPES AND SIZES Form Pipe Size in/mm                                                             Thickness in/mm Pipe Insulation                                1/2 - 24 / 15-600 1-3 / 25-76 Thermo-1200'                                                          Quad Segments 20-37 / 500-925
Hex Pipe Covering 38-52 / 950-1300
1 1/2-3 / 38-76 1 1/2-3 / 38-76 Calcium Silicate Pipe & Block Insulation                              Curved Segments                                30-126 / 700-3200                      1 1/2-3 / 38-76 3-V Scored Block                              30 min / 750 min 1 1/2-4 / 38-102 Beveled Lags                                  126 min / 3200 min                      1 1/2-3 / 38-76 Flat Block                                    Flat Surface 1-4 / 25-102 THERMAL PERFORMANCE ASTM C335 (PIPE)                                     ASTM C518 (FLAT)
Mean Temp.                    Btu.in/(hr . ft2 . 0F) W/mºC                        Btu.in/(hr . ft2 . 0F)          W/mºC 100ºF / 38ºC               .344 .050                                          .355                            .051 200ºF / 93ºC               .389                       .056                   .373                            .054 300ºF / 149ºC                  .437                          .063                    .397                            .057 400ºF / 204ºC               .486                       .070                    .428                            .062 500ºF / 260ºC                  .538                          .078                    .465                            .067 600ºF / 316ºC               .591                          .085                    .509                            .559 700ºF / 371ºC                  .647                          .093                    .559                            .081 Thermo-1200'* is a water-resistant, molded, high-temperature, SPECIFICATION COMPLIANCE ASTM C533 Type I Material Specification - Passes                                  ASTM C795 / C871 / C692 Corrosion Austenitic abuse-resistant pipe and block insulation composed of hydrous        ASTM C1617 Corrosion - Passes                                                    Stainless Steel - Passes calcium silicate. Recommended for use in the industrial processing                                                                                      ASTM E136 Non-Combustible - Passes and power generation industries. Integral to Thermo-1200' is XOX      For more information, refer to product data sheet IND-303 Corrosion Inhibitor, a distinctive formula and process that actively *Thermo-1200' water resistant calcium silicate is not hydrophobic. Thermo-1200' is designed to be able to withstand short periods of rainfall without absorbing water in excess. The volume of water absorption depends on the duration of exposure and the amount of rainfall. The inhibits corrosion to outside surfaces of pipe and equipment.        insulation is not meant to withstand extreme weather conditions without jacketing. While this new water resistant feature can be helpful during prolonged field installations, it is nevertheless recommended that an installer weatherproof and jacket the thermal insulation as soon Operating Temperature Limit: 1200°F (650°C)                          as it is feasibly possible. Should water enter the system, the corrosion inhibitors will still activate to continue to help combat corrosion at a chemical level, and once the system reaches operating temperatures, the water will vaporize and leave the system.
Sproule-1200'                                                          AVAILABLE SHAPES AND SIZES Form Pipe Size in/mm                                                               Thickness in/mm Expanded Perlite Pipe & Block Insulation                              Pipe Insulation                                  1/2 - 24 / 15-600 1- 4 / 25-102 Quad Segments 24 - 40 / 600-1000                                                     1 1/2-3 / 38-76 Scored or V-Grooved Block                    30 min / 750 min 1 1/2-4 / 38-102 Flat Block                                    Flat Surface 1-4 / 25-102 THERMAL PERFORMANCE ASTM C335 (PIPE)                                     ASTM C518 (FLAT)
Mean Temp.                    Btu.in/(hr . ft2 . 0F) W/mºC                        Btu.in/(hr . ft2 . 0F)          W/mºC 100ºF / 38ºC               .412 .059                                          .438                            .063 200ºF / 93ºC               .481                       .069                   .476                            .069 300ºF / 149ºC                  .548                          .079                    .515                            .074 400ºF / 204ºC               .611                       .088                    .557                            .080 500ºF / 260ºC                  .671                          .097                    .601                            .087 600ºF / 316ºC               .728                          .105                    .646                            .093 700ºF / 371ºC                  .782                          .113                    .694                            .100 Sproule-1200' is a preformed, high-temperature, non-wicking pipe and block insulation composed of expanded perlite that            SPECIFICATION COMPLIANCE ASTM C610 Material Specification - Passes is uniformly reinforced with a high-strength fiber. Integral to        ASTM C1617 Corrosion - Passes Sproule-1200' is XOX Corrosion Inhibitor, a distinctive formula        ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes and process that actively inhibits corrosion to outside surfaces        ASTM E136 Non-Combustible - Passes of pipe and equipment.
For more information, refer to product data sheet IND-200 Operating Temperature Limit: 1200°F (650°C)
InsulThin HT AVAILABLE SHAPES AND SIZES Hydrophobic Microporous Blanket Insulation                            Roll Size                                     Roll Weight                               Dimensions 36 Wide                                     45lbs                                     10mm x 36 x 25
                                                                                                                                                              5mm x 36 x 50 60 Wide                                     75lbs                                     10mm x 60 x 25
                                                                                                                                                              5mm x 60 x 50 THERMAL PERFORMANCE Mean Temperature                           Btu.in/(hr . ft2 . 0F)                   W/mºC 100ºF / 38ºC                               0.189 0.027 200ºF / 93ºC                               0.195                                     0.028 400ºF / 204ºC                             0.213                                     0.031 600ºF / 316ºC                             0.237                                     0.034 SPECIFICATION COMPLIANCE InsulThin HT is a high-temperature, hydrophobic, thin, flexible,      ASTM C1676 Material Specification - Passes microporous blanket insulation. Microporous insulation is a            ASTM C1617 Corrosion - Passes highly efficient insulation material and has been in service in a      ASTM C665 Corrosivity to Steel - Passes variety of industrial and commercial insulation applications for      ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes more than 35 years.                                                    ASTM E84 Surface Burning Characteristics - Flame Spread-0, Smoke Developed-0 Operating Temperature Limit: 1200°F (650°C)                            For more information, refer to product data sheet IND-700 2
 
MinWool-1200 Pipe                                                        AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                                    Form Pipe Size in/mm                                   Thickness in/mm One Piece                            1/2 - 6 / 15-152 1-6 / 25-152 Two Piece                            7-24 / 175-600       1-6 / 25-152 Four Piece 25-44 / 625-1100                             1-6 / 25-152
                                                                                                                                    (1/2 increments)
THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC                     0.23 0.033 200ºF / 93ºC                     0.28               0.040 400ºF / 204ºC                     0.40                  0.058 600ºF / 316ºC                     0.56                  0.081 MinWool-1200 Pipe is a water-repellent pipe insulation made of SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types I, II, IV - Passes inorganic fibers derived from basalt, a volcanic rock. It is made          ASTM C665 Corrosivity to Steel - Passes with a thermosetting resin binder. Advanced manufacturing                  BS EN 13472 Short-Term Water Absorption technology ensures consistent product quality, with high fiber density and low shot content, for excellent performance in high-          For more information, refer to product data sheet IND-401 temperature, thermal control and fire-resistant applications.
Operating Temperature Limit: 1200°F (650°C)
Operating Temperature Limit: 1200°F (650°C)
Thermo-1200
MinWool-1200 Preformed Pipe                                              AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                                    Standard Thickness
ŽCalcium Silicate Pipe & Block Insulation Thermo-1200
Single Layer: 1-4 thick Double Layer: Over 4 thick in 1/2 increments Pipe Size: 1/2 - 36 Available in iron and copper tubing sizes THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F)  W/mºC 100ºF / 38ºC                     0.25 0.036 200ºF / 93ºC                     0.30               0.044 400ºF / 204ºC                     0.44                 0.064 600ºF / 316ºC                     0.62                    0.090 MinWool-1200 Preformed (PF) Pipe insulation is made of inorganic fibers derived from basalt, a volcanic rock. It is made with a SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types III - Passes thermosetting resin binder. PF Pipe insulation is a factory V-grooved    ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes mineral wool board that is formed to specific pipe sizes and provided      ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less in half cylinder sections with a variety of facing options.
Ž* is a water-resistant, molded, high-temperature, abuse-resistant pipe and block insulation composed of hydrous calcium silicate. Recommended for use in the industrial processing and power generation industries.
Operating Temperature Limit: 1200°F (650°C)                               For more information, refer to product data sheet IND-423 MinWool-1200 Field-Formed Pipe                                            AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                                    Standard Thickness
Integral to Thermo-1200
Single Layer: 11/2-4 thick Double Layer: Over 4 thick in 1/2 increments Pipe Size: 21/2-72 Available in NPS pipe sizes and copper tubing sizes THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC                     0.25 0.036 200ºF / 93ºC                     0.30               0.044 400ºF / 204ºC                     0.44                 0.064 600ºF / 316ºC                     0.62                    0.090 MinWool-1200 Field-Formed Pipe insulation is made of inorganic SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types III - Passes fibers derived from basalt, a volcanic rock. It is made with a            ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes thermosetting resin binder. Field-Formed Pipe insulation is a factory      ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less V-grooved mineral wool board with a unique contact adhesive in the grooves. It is manufactured to specific pipe sizes with a variety of  For more information, refer to product data sheet IND-420 facing options. It ships flat and allows for easy forming at the job site.
Ž is XOX Corrosion Inhibitor
Operating Temperature Limit: 1200°F (650°C) 3
, a distinctive formula and process that actively inhibits corrosion to outside surfaces of pipe and equipment.
Operating Temperature Limit: 1200°F (650°C)AVAILABLE SHAPES AND SIZES Form    Pipe Size in/mm Thickness in/mm Pipe Insulation 1/2 - 24 / 15-600  1-3 / 25-76 Quad Segments


20-37 / 500-925  1 1/2-3 /  38-76 Hex Pipe Covering  38-52 / 950-1300  1 1/2-3 /  38-76 Curved Segments 30-126 / 700-3200 1 1/2-3 /  38-76 3-V Scored Block 30 min / 750 min  1 1/2-4 /  38-102 Beveled Lags 126 min / 3200 min 1 1/2-3 /  38-76 Flat Block Flat Surface
MinWool-1200 Precision Cut                                            AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                                Standard Thickness                                       Facings Available
 
Single Layer: 1-4 thick                                      Sizes 1/2 - 2 are supplied with no facing Double Layer: Over 4 thick in 1/2 increments                  Sizes 21/2 and above are supplied with a Pipe Size: 1/2 -72                                              fiberglass mat facing Available in iron and copper tubing sizes                      Other facings available include: ASJ and FSK THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F)               W/mºC 100ºF / 38ºC                     0.25 0.036 200ºF / 93ºC                     0.30                             0.044 400ºF / 204ºC                     0.44                             0.064 600ºF / 316ºC                     0.62                                0.090 MinWool-1200 Precision Cut (PC) Pipe insulation is made of SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types III - Passes inorganic fibers derived from basalt, a volcanic rock. It is made with ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes thermosetting resin binder. PC Pipe insulation (without adhesive) is    ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less a factory V-grooved mineral wool board manufactured to specific pipe or vessel sizes with a variety of facing options. It ships flat in For more information, refer to product data sheet IND-422 4 mil plastic and allows easy forming at the job site.
1-4 / 25-102 THERMAL PERFORMANCE ASTM C335 (PIPE)  ASTM C518 (FLAT)Mean Temp.
Operating Temperature Limit: 1200°F (650°C)
Btu.in/(hr . ft² . 0 F) W/mºC Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC
MinWool-1200 Pipe & Tank Wrap                                          AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                                Roll Length ft/m Width in/m                                          Thickness in/mm 18 / 5.5                              48 / 1.22 11/2 / 40 16 / 4.9                              48 / 1.22                          2 / 50 14 / 4.3                              48 / 1.22                          21/2 / 65 12 / 3.7                              48 / 1.22                          3 / 75 10 / 3.1                              48 / 1.22                          31/2 / 90 8 / 2.4                              48 / 1.22                          4 / 100 THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F)              W/mºC 100ºF / 38ºC                       0.23 0.033 200ºF / 93ºC                       0.28                           0.040 400ºF / 204ºC                     0.40                                0.058 600ºF / 316ºC                     0.56                                0.081 MinWool-1200 Pipe & Tank Wrap insulation is made of                      SPECIFICATION COMPLIANCE inorganic fibers derived from basalt, a volcanic rock. It is made        ASTM C553 Mineral Fiber Blanket Specification Types I, II,III,IV, V, VI - Passes with a thermosetting resin binder. Advanced manufacturing                ASTM C665 Corrosivity to Steel - Passes technology ensures consistent product quality, with high fiber          ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes ASTM E84 Surface Burning Characteristics / Flame Spread - 25, Smoke Developed - 50 or less density and low shot content, for excellent performance in high-ASTM E136 Non-Combustible - Passes (mineral wool only) temperature, thermal control and fire-resistant applications.
    .344    .050 .355 .051 200ºF / 93ºC
Operating Temperature Limit: 1200°F (650°C)                              For more information, refer to product data sheet IND-415 MinWool-1200 Lamella Tank Wrap                                          AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                                  Standard Thickness
    .389    .056 .373 .054 300ºF / 149ºC
Single Layer: 1-4 thick Facings Available
.437 .063 .397 .057400ºF / 204ºC
Standard is fiberglass mat Available with ASJ THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F)             W/mºC 100ºF / 38ºC                       0.29 0.042 200ºF / 93ºC                       0.36                           0.052 400ºF / 204ºC                     0.54                                0.078 600ºF / 316ºC                     0.82                                0.118 SPECIFICATION COMPLIANCE MinWool-1200 Lamella Tank Wrap is a flexible mineral wool wrap          ASTM C1393 Material Specification / Complies ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes insulation. It is a lightweight, high-performance insulation for high-ASTM E84 Surface Burning Characteristics / Flame Spread - 25, Smoke Developed - 50 or less temperature applications. This insulation is produced to fit large      ASTM E136 Non-Combustible - Passes (mineral wool only) diameter pipe, duct, tanks and equipment, ranging in temperatures from below ambient up to 1000°F continuous maximum service temperature.     For more information, refer to product data sheet IND-424 Operating Temperature Limit: 1200°F (650°C) 4
    .486    .070 .428 .062 500ºF / 260ºC
.538 .078 .465 .067600ºF / 316ºC
    .591 .085 .509 .559 700ºF / 371ºC
.647 .093 .559 .081SPECIFICATION COMPLIANCEASTM C533 Type I Material Speci~cation - Passes ASTM C1617 Corrosion - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E136 Non-Combustible - Passes For more information, refer to product data sheet IND-303
*Thermo-1200
Ž water resistant calcium silicate is not hydrophobic. Thermo-1200
Ž is designed to be able to withstand short periods of rainfall without absorbing water in excess. The volume of water absorption depends on the duration of exposure and the amount of rainfall. The insulation is not meant to withstand extreme weather conditions without jacketing. While this new water resistant feature can be helpful during prolonged ~eld installations, it is nevertheless recommended that an installer weatherproof and jacket the thermal insulation as soon as it is feasibly possible. Should water enter the system, the corrosion inhibitors will still activate to continue to help combat corrosion at a chemical level, and once the system reaches operating temperatures, the water will vaporize and leave the system.
THERMAL PERFORMANCE ASTM C335 (PIPE)  ASTM C518 (FLAT)Mean Temp.
Btu.in/(hr . ft² . 0 F) W/mºC Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC
    .412    .059 .438 .063 200ºF / 93ºC
    .481    .069  .476 .069 300ºF / 149ºC
.548 .079 .515 .074400ºF / 204ºC
    .611    .088 .557 .080 500ºF / 260ºC
.671 .097 .601 .087600ºF / 316ºC
    .728 .105 .646 .093 700ºF / 371ºC
.782 .113 .694 .100AVAILABLE SHAPES AND SIZES Form    Pipe Size in/mm Thickness  in/mm Pipe Insulation 1/2 - 24 / 15-600  1- 4 / 25-102 Quad Segments


24 - 40 / 600-1000  1 1/2-3 / 38-76Scored or V-Grooved Block 30 min / 750 min  1 1/2-4 / 38-102 Flat Block Flat Surface
MinWool-1200 Industrial Board                                  AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                          Nominal Densities (lb/ft3/kg/m3)            Sizes in/mm            Thicknesses in/mm 1240 (4 / 48)                                  24 x 48 / 610 x 1219    1-4 / 25-102 1260 (6 / 96)                                  36 x 48 / 914 x 1219    (All Densities) 1280 (8 / 128)                                  (All Densities)          Foil Scrim Polyethylene 1210 (10 / 160)                                                         (FSP) facing may be 1212 (12 / 192)                                                         available on a
                                                                                                                                        made-to-order basis THERMAL PERFORMANCE*
Mean Temperature                   Btu.in/(hr . ft2 . 0F)          W/mºC 100ºF / 38ºC                       0.25 0.036 200ºF / 93ºC                       0.30                       0.043 400ºF / 204ºC                     0.42                            0.061 600ºF / 316ºC                     0.56                            0.081 MinWool-1200 Industrial Board insulation is made of inorganic SPECIFICATION COMPLIANCE ASTM C612 Material Specification - Complies fibers derived from basalt, a volcanic rock. It is made with a  ASTM C665 Corrosivity to Steel - Passes thermosetting resin binder. Advanced manufacturing technology    ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes ensures consistent product quality, with high fiber density and ASTM E136 Non-Combustible - Passes low shot content, for excellent performance in high-temperature,
                                                                  *Thermal Performance listed for 1280 density only - for other densities and more information, refer to thermal control and fire-resistant applications.                product data sheet IND-402


1-4 / 25-102SPECIFICATION COMPLIANCE ASTM C610 Material Speci~cation - Passes ASTM C1617 Corrosion - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Operating Temperature Limit: 1200°F (650°C)                         1 thickness available in 8#, 10# and 12# densities only MinWool-1200 Flex Batt                                            AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                            Nominal Densities (lb/ft3/kg/m3)          Sizes in/mm              Thicknesses in/mm 1240 (4 / 48)                                  24 x 48 / 610 x 1219      1-4 / 25-102 1260 (6 / 96)                                  36 x 48 / 914 x 1219      (All Densities) 1280 (8 / 128)                                  (All Densities) 1210 (10 / 160)
Passes ASTM E136 Non-Combustible - Passes For more information, refer to product data sheet IND-200 Sproule-1200
1212 (12 / 192)
Ž is a preformed, high-temperature, non-wicking pipe and block insulation composed of expanded perlite that is uniformly reinforced with a high-strength ~ber. Integral to Sproule-1200
THERMAL PERFORMANCE*
Ž is XOX Corrosion Inhibitor
Mean Temperature                   Btu.in/(hr . ft2 . 0F)         W/mºC 100ºF / 38ºC                     0.25 0.036 200ºF / 93ºC                     0.30                       0.043 400ºF / 204ºC                     0.42                            0.061 600ºF / 316ºC                     0.56                            0.081 MinWool-1200 Flexible Batt insulation is made of inorganic SPECIFICATION COMPLIANCE ASTM C612 Material Specification - Complies fibers derived from basalt, a volcanic rock. It is made with a     ASTM C665 Corrosivity to Steel - Passes thermosetting resin binder. Advanced manufacturing technology      ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes ensures consistent product quality, with high fiber density and   ASTM E136 Non-Combustible - Passes low shot content, for excellent performance in high-temperature,
, a distinctive formula and process that actively inhibits corrosion to outside surfaces of pipe and equipment.
                                                                  *Thermal Performance listed for 1280 density only - for other densities and more information, refer to thermal control and fire-resistant applications.                  product data sheet IND-406
Operating Temperature Limit: 1200°F (650°C)
Sproule-1200
ŽExpanded Perlite Pipe & Block Insulation 2
MinWool-1200 Field-Formed PipeMineral Wool InsulationAVAILABLE SHAPES AND SIZESStandard Thickness      Single Layer: 11/2-4" thick Double Layer: Over 4" thick in 1/2" incrementsPipe Size:  21/2-72" Available in NPS pipe sizes and copper tubing sizes THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25   0.036200ºF / 93ºC 0.30     0.044400ºF / 204ºC 0.44    0.064600ºF / 316ºC 0.62 0.090SPECIFICATION COMPLIANCEASTM C547 Material Speci~cation Types III - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less For more information, refer to product data sheet IND-420MinWool-1200 Field-Formed Pipe insulation is made of inorganic ~bers derived from basalt, a volcanic rock. It is made with a thermosetting resin binder. Field-Formed Pipe insulation is a factory "V-grooved" mineral wool board with a unique contact adhesive in the grooves. It is manufactured to speci~c pipe sizes with a variety of facing options. It ships at and allows for easy forming at the job site.
Operating Temperature Limit: 1200°F (650°C)MinWool-1200 PipeMineral Wool InsulationAVAILABLE SHAPES AND SIZES Form    Pipe Size in/mm Thickness  in/mm One Piece    1/2 - 6 / 15-152


1-6 / 25-152Two Piece  7-24 / 175-600  1-6 / 25-152 Four Piece
Operating Temperature Limit: 1200°F (650°C)                          1 thickness available in 8#, 10# and 12# densities only MinWool-1200 Metal Mesh Blanket                                  AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                          Standard Thickness
Single Layer: 1-4 thick in 1/2 increments Standard Width: 24 Standard Length: 48 THERMAL PERFORMANCE*
Mean Temperature                   Btu.in/(hr . ft2 . 0F)          W/mºC 100ºF / 38ºC                     0.25 0.036 200ºF / 93ºC                     0.30                       0.043 400ºF / 204ºC                     0.42                            0.061 600ºF / 316ºC                     0.56                            0.081 SPECIFICATION COMPLIANCE ASTM C592 Specification of Metal Mesh Covered Blanket Type I,II,III - Complies ASTM C665 Corrosivity to Steel - Passes MinWool-1200 Metal Mesh Blanket (MMB) insulation is made          ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes of inorganic fibers derived from basalt, a volcanic rock, with    ASTM E136 Non-Combustible - Passes a thermosetting resin binder. MMB is a mineral wool blanket
                                                                  *Thermal Performance listed for 1280 density only - for other densities and more available with a variety of metal mesh options mechanically information, refer to product data sheet IND-406 applied to one or both surfaces.
Operating Temperature Limit: 1200°F (650°C) 5


25-44 / 625-1100  1-6 / 25-152 (1/2" increments)
MinWool-1200 Mitered Fittings                                      AVAILABLE SHAPES AND SIZES Mineral Wool Insulation                                              Standard Thickness                                       Facings Available
THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.23    0.033200ºF / 93ºC 0.28    0.040400ºF / 204ºC 0.40 0.058600ºF / 316ºC 0.56 0.081SPECIFICATION COMPLIANCEASTM C547 Material Speci~cation Types I, II, IV - Passes ASTM C665 Corrosivity to Steel - Passes BS EN 13472 Short-Term Water Absorption For more information, refer to product data sheet IND-401MinWool-1200 Pipe is a water-repellent pipe insulation made of inorganic ~bers derived from basalt, a volcanic rock. It is made with a thermosetting resin binder. Advanced manufacturing technology ensures consistent product quality, with high ~ber density and low shot content, for excellent performance in high-temperature, thermal control and ~re-resistant applications. Operating Temperature Limit: 1200°F (650°C)MinWool-1200 Preformed PipeMineral Wool InsulationAVAILABLE SHAPES AND SIZESStandard Thickness       Single Layer: 1-4" thick Double Layer: Over 4" thick in 1/2" incrementsPipe Size:  1/2 - 36" Available in iron and copper tubing sizes THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25   0.036200ºF / 93ºC 0.30     0.044400ºF / 204ºC 0.44   0.064600ºF / 316ºC 0.62 0.090SPECIFICATION COMPLIANCEASTM C547 Material Speci~cation Types III - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Single Layer: 1-4 thick                                       Sizes 1/2 - 2 are supplied with no facing Double Layer: Over 4 thick in 1/2 increments                  Sizes 21/2 and above are supplied with a Sizes available up to a 72 IPS but vary by thickness          fiberglass mat facing Available in NPS pipe sizes and copper tubing sizes           Other facings available include: ASJ and FSK THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F)             W/mºC 100ºF / 38ºC                       0.25 0.036 200ºF / 93ºC                       0.30                           0.044 400ºF / 204ºC                     0.44                             0.064 600ºF / 316ºC                     0.62                               0.090 MinWool-1200 Mitered Fittings are made of inorganic fibers derived from basalt, a volcanic rock. It is made with thermosetting resin SPECIFICATION COMPLIANCE ASTM C547 / C585 MICA Fabrication Standards - Complies binder. These mitered and bonded fittings are for standard short and ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes long radius and non-standard radius sweep elbows found in normal    ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less piping schemes. Fittings are manufactured from MinWool-1200 Preformed Pipe Insulation and mitered into precision segments.       For more information, refer to product data sheet IND-419 Operating Temperature Limit: 1200°F (650°C)
Passes ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less For more information, refer to product data sheet IND-423MinWool-1200 Preformed (PF) Pipe insulation is made of inorganic ~bers derived from basalt, a volcanic rock. It is made with a thermosetting resin binder. PF Pipe insulation is a factory "V-grooved" mineral wool board that is formed to speci~c pipe sizes and provided in half cylinder sections with a variety of facing options.
Super Caltemp Gold 1700                                            AVAILABLE SHAPES AND SIZES Calcium Silicate Pipe & Block Insulation                            Form Pipe Size in/mm                                                 Thickness in/mm 3-V Scored Block                      30 min / 750 min 1 1/2-3 / 38-76 Flat Block                            Flat Surface 1-3 / 25-76 THERMAL PERFORMANCE Mean Temperature                   Btu.in/(hr . ft2 . 0F)             W/mºC 200ºF / 93ºC                       0.54                           0.078 400ºF / 204ºC                     0.61                                0.088 600ºF / 315ºC                     0.67                                0.097 800ºF / 427ºC                     0.73                                0.105 Super Caltemp Gold 1700 block is an inorganic, non-combustible,       SPECIFICATION COMPLIANCE high-temperature insulation that is composed primarily of hydrous    ASTM C533 Type II Material Specification - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes calcium silicate. The insulation is tailored for systems operating up ASTM E136 Non-Combustible - Passes to 1700°F (927°C). Super Caltemp Gold 1700 meets or exceeds the physical and thermal property requirements of ASTM C533, Type II.
Operating Temperature Limit: 1200°F (650°C) 3 MinWool-1200 Lamella Tank WrapMineral Wool InsulationAVAILABLE SHAPES AND SIZESStandard Thickness      Single Layer: 1-4" thickFacings Available      Standard is ~berglass matAvailable with ASJ THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F)  W/mºC100ºF / 38ºC 0.29    0.042200ºF / 93ºC 0.36    0.052400ºF / 204ºC 0.54 0.078600ºF / 316ºC 0.82 0.118SPECIFICATION COMPLIANCE ASTM C1393 Material Speci~cation / Complies ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Operating Temperature Limit: 1700°F (927°C)                           For more information, refer to product data sheet IND-305 Super Firetemp                                                      AVAILABLE TYPES AND SIZES High-Temperature Insulation                                          Types Board Dimensions                                                Thickness in/mm Super Firetemp L                   4ft x 8ft 3/4 - 3 / 13 - 76 Super Firetemp M                      4ft x 8ft                            1/2 - 3 / 13 - 76 Super Firetemp H                      4ft x 8ft                            1/2 -2 / 13 - 51 Super Firetemp X                      4ft x 8ft                            1/2 - 2 / 13 - 51 Super Firetemp S                      4ft x 8ft                            1/2 - 11/2 / 13 - 38
Passes ASTM E84 Surface Burning Characteristics / Flame Spread - 25, Smoke Developed - 50 or less ASTM E136 Non-Combustible - Passes (mineral wool only)
                                                                                                                                              (1/2 increments)
For more information, refer to product data sheet IND-424MinWool-1200 Lamella Tank Wrap is a exible mineral wool wrap insulation. It is a lightweight, high-performance insulation for high-temperature applications. This insulation is produced to ~t large diameter pipe, duct, tanks and equipment, ranging in temperatures from below ambient up to 1000°F continuous maximum service temperature.
AVAILABLE DENSITIES Type                                  Density (Avg.)                     ASTM C656 Super Firetemp L                      20 pcf (288 kg / m3) Type II, Grade 5 Super Firetemp M                      28 pcf (449 kg / m3)               Type II, Grade 6 Super Firetemp H                      35 pcf (561 kg / m3)               Type II, Grade 6 Super Firetemp X                      40 pcf (641 kg / m )     3 Type II, Grade 7 Super Firetemp S                      55 pcf (881 kg / m )     3 Type II, Grade 8 Super Firetemp boards are inorganic, high-temperature boards          SPECIFICATION COMPLIANCE ASTM C795 Corrosion Austenitic Stainless Steel - Passes with exceptional strength and insulating qualities, produced ASTM E136 Non-Combustible - Passes in various densities. Super Firetemp boards are suitable for fire protection applications, refractory backup, and can be          For more information, refer to product data sheets:
Operating Temperature Limit: 1200°F (650°C)MinWool-1200 Precision CutMineral Wool InsulationAVAILABLE SHAPES AND SIZESStandard Thickness      Single Layer: 1-4" thick Double Layer: Over 4" thick in 1/2" incrementsPipe Size:  1/2 -72" Available in iron and copper tubing sizes THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25    0.036200ºF / 93ºC 0.30    0.044400ºF / 204ºC 0.44    0.064600ºF / 316ºC 0.62 0.090SPECIFICATION COMPLIANCEASTM C547 Material Speci~cation Types III - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
machined into component parts of many shapes and sizes.              IND-103(L), IND-104(M), IND-105(H), IND-106(X), IND-107(S)
Passes ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less For more information, refer to product data sheet IND-422MinWool-1200 Precision Cut (PC) Pipe insulation is made of inorganic ~bers derived from basalt, a volcanic rock. It is made with thermosetting resin binder. PC Pipe insulation (without adhesive) is a factory "V-grooved" mineral wool board manufactured to speci~c pipe or vessel sizes with a variety of facing options. It ships at in 4 mil plastic and allows easy forming at the job site.
Continuous Temperature Limit: Varies by product type 6
Operating Temperature Limit: 1200°F (650°C)MinWool-1200 Pipe & Tank WrapMineral Wool InsulationAVAILABLE SHAPES AND SIZESRoll Length ft/m Width in/m Thickness in/mm 18 / 5.5    48 / 1.22 11/2 / 40 16 / 4.9  48 / 1.22 2 / 50 14 / 4.3  48 / 1.22 21/2 / 65 12 / 3.7  48 / 1.22 3 / 75 10 / 3.1  48 / 1.22 31/2 / 90  8 / 2.4  48 / 1.22 4 / 100 THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.23    0.033200ºF / 93ºC 0.28    0.040400ºF / 204ºC 0.40 0.058600ºF / 316ºC 0.56 0.081SPECIFICATION COMPLIANCEASTM C553 Mineral Fiber Blanket Speci~cation Types I, II,III,IV, V, VI - Passes ASTM C665 Corrosivity to Steel - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E84 Surface Burning Characteristics / Flame Spread - 25, Smoke Developed - 50 or less ASTM E136 Non-Combustible - Passes (mineral wool only)
For more information, refer to product data sheet IND-415MinWool-1200 Pipe & Tank Wrap insulation is made of inorganic fibers derived from basalt, a volcanic rock. It is made with a thermosetting resin binder. Advanced manufacturing technology ensures consistent product quality, with high fiber density and low shot content, for excellent performance in high-temperature, thermal control and fire-resistant applications.
Operating Temperature Limit: 1200°F (650°C)Facings Available      Sizes 1/2 - 2" are supplied with no facingSizes 21/2" and above are supplied with a
~berglass mat facing Other facings available include: ASJ and FSK 4
MinWool-1200 Metal Mesh BlanketMineral Wool InsulationAVAILABLE SHAPES AND SIZESStandard Thickness      Single Layer: 1-4" thick in 1/2" increments Standard Width: 24" Standard Length: 48" THERMAL PERFORMANCE*Mean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25    0.036200ºF / 93ºC 0.30    0.043400ºF / 204ºC 0.42 0.061600ºF / 316ºC 0.56 0.081SPECIFICATION COMPLIANCEASTM C592 Speci~cation of Metal Mesh Covered Blanket Type I,II,III - Complies ASTM C665 Corrosivity to Steel - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E136 Non-Combustible - Passes
*Thermal Performance listed for 1280 density only
- for other densities and more information, refer to product data sheet IND-406MinWool-1200 Metal Mesh Blanket (MMB) insulation is made of inorganic ~bers derived from basalt, a volcanic rock, with a thermosetting resin binder. MMB is a mineral wool blanket available with a variety of metal mesh options mechanically applied to one or both surfaces.
Operating Temperature Limit: 1200°F (650°C)MinWool-1200 Industrial BoardMineral Wool InsulationAVAILABLE SHAPES AND SIZES Nominal Densities (lb/ft³/kg/m³)            Sizes in/mm Thickness es in/mm 1240 (4 / 48) 24 x 48 / 610 x 1219 1f-4 / 25f-102 1260 (6 / 96) 36 x 48 / 914 x 1219          (All Densities) 1280 (8 / 128)
(All Densities)
Foil Scrim Polyethylene 1210 (10 / 160)
(FSP) facing may be 1212 (12 / 192) available on a made-to-order basis THERMAL PERFORMANCE*Mean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25    0.036200ºF / 93ºC 0.30    0.043400ºF / 204ºC 0.42 0.061600ºF / 316ºC 0.56 0.081SPECIFICATION COMPLIANCE ASTM C612 Material Speci~cation - Complies ASTM C665 Corrosivity to Steel - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E136 Non-Combustible - Passes
*Thermal Performance listed for 1280 density only -
for other densities and more information, refer to product data sheet IND-402 f 1" thickness available in 8#, 10# and 12# densities onlyMinWool-1200 Industrial Board insulation is made of inorganic fibers derived from basalt, a volcanic rock. It is made with a thermosetting resin binder. Advanced manufacturing technology ensures consistent product quality, with high fiber density and low shot content, for excellent performance in high-temperature, thermal control and fire-resistant applications. Operating Temperature Limit: 1200°F (650°C)MinWool-1200 Flex Batt Mineral Wool InsulationAVAILABLE SHAPES AND SIZES Nominal Densities (lb/ft³/kg/m³)            Sizes in/mm Thickness es in/mm 1240 (4 / 48) 24 x 48 / 610 x 1219            1 f-4 / 25f-102 1260 (6 / 96) 36 x 48 / 914 x 1219            (All Densities) 1280 (8 / 128)
(All Densities) 1210 (10 / 160) 1212 (12 / 192)
THERMAL PERFORMANCE*Mean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25    0.036200ºF / 93ºC 0.30     0.043400ºF / 204ºC 0.42 0.061600ºF / 316ºC 0.56 0.081SPECIFICATION COMPLIANCE ASTM C612 Material Speci~cation - Complies ASTM C665 Corrosivity to Steel - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E136 Non-Combustible - Passes
*Thermal Performance listed for 1280 density only
- for other densities and more information, refer to product data sheet IND-406 f 1" thickness available in 8#, 10# and 12# densities onlyMinWool-1200 Flexible Batt insulation is made of inorganic fibers derived from basalt, a volcanic rock. It is made with a thermosetting resin binder. Advanced manufacturing technology ensures consistent product quality, with high fiber density and low shot content, for excellent performance in high-temperature, thermal control and fire-resistant applications.
Operating Temperature Limit: 1200°F (650°C) 5 Super Firetemp High-Temperature InsulationAVAILABLE TYPES AND SIZES Types    Board Dimensions Thickness  in/mm Super Firetemp L    4ft x 8ft


3/4 - 3 / 13 - 76 Super Firetemp M 4ft x 8ft  1/2 - 3 / 13 - 76 Super Firetemp H 4ft x 8ft  1/2 -2 / 13 - 51 Super Firetemp X 4ft x 8ft  1/2 - 2 / 13 - 51 Super Firetemp S 4ft x 8ft  1/2 - 11/2 / 13 - 38 (1/2" increments)AVAILABLE DENSITIESType Density (Avg.)
Accessories Insulation Product Accessories Insulkote ET                                              Calbond Gold Weather Protective Coating                                  High-Temperature Glue Developed as a high-quality protective coating, Insulkote  CalBond Gold is a modified, silicate-based glue for ET is a compound of selected and processed bitumens        thermal insulations. It sets quickly to provide a high-and mineral fillers. It is recommended for weather-         temperature bond for porous insulating materials.
ASTM C656 Super Firetemp L 20 pcf (288 kg / m
protecting insulated vessels, tanks, piping, equipment      CalBond Gold is useful for bonding sections of calcium and duct work. Insulkote ET is a non-vapor barrier,         silicate or perlite high-temperature pipe or block weather-proof coating for use over thermal insulation      insulation and to make mitered elbows, large insulating where breathing is required.                              sections or other special shapes.
: 3)  Type II, Grade 5 Super Firetemp M 28 pcf (449 kg / m
For more information, refer to product data sheet IND-10    For more information, refer to product data sheet IND-11 CalCoat-127                                                Super Calstik One Coat Finishing Cement                                  High-Temperature Glue CalCoat-127 is a proprietary blend of hydraulic cement,     Super Calstik is a modified, silicate-based glue. It sets calcium silicate and inorganic mineral fibers with          quickly to provide a high-temperature bond for porous corrosion inhibitors that provides a smooth finish          insulating materials. Super Calstik is used for bonding over high-temperature insulation. CalCoat-127 is            and sealing joints in Super Firetemp high-temperature recommended for finishing use with calcium silicate        insulation. It is used in walls, structural steel, cable or perlite insulation in high-temperature piping and       trays and other fire-rated applications.
: 3) Type II, Grade 6 Super Firetemp H 35 pcf (561 kg / m
equipment applications.
: 3) Type II, Grade 6 Super Firetemp X 40 pcf (641 kg / m
For more information refer, to product data sheet IND-108 For more information, refer to product data sheet IND-13 7
: 3) Type II, Grade 7 Super Firetemp S 55 pcf (881 kg / m
: 3) Type II, Grade 8SPECIFICATION COMPLIANCE ASTM C795 Corrosion Austenitic Stainless Steel -
Passes ASTM E136 Non-Combustible - Passes For more information, refer to product data sheets:
IND-103(L), IND-104(M), IND-105(H), IND-106(X), IND-107(S)
Super Firetemp boards are inorganic, high-temperature boards with exceptional strength and insulating qualities, produced in various densities. Super Firetemp boards are suitable for fire protection applications, refractory backup, and can be machined into component parts of many shapes and sizes. Continuous Temperature Limit: Varies by product typeMinWool-1200 Mitered FittingsMineral Wool InsulationAVAILABLE SHAPES AND SIZESStandard Thickness      Single Layer: 1-4" thick Double Layer: Over 4" thick in 1/2" increments Sizes available up to a 72" IPS but vary by thicknessAvailable in NPS pipe sizes and copper tubing sizes THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F) W/mºC100ºF / 38ºC 0.25    0.036200ºF / 93ºC 0.30    0.044400ºF / 204ºC 0.44    0.064600ºF / 316ºC 0.62 0.090SPECIFICATION COMPLIANCE ASTM C547 / C585 MICA Fabrication Standards - Complies ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Passes ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less For more information, refer to product data sheet IND-419MinWool-1200 Mitered Fittings are made of inorganic fibers derived from basalt, a volcanic rock. It is made with thermosetting resin binder. These mitered and bonded fittings are for standard short and long radius and non-standard radius sweep elbows found in normal piping schemes. Fittings are manufactured from MinWool-1200 Preformed Pipe Insulation and mitered into precision segments.
Operating Temperature Limit: 1200°F (650°C)
Super Caltemp Gold 1700Calcium Silicate Pipe & Block InsulationAVAILABLE SHAPES AND SIZES Form    Pipe Size in/mm Thickness  in/mm 3-V Scored Block 30 min / 750 min  1 1/2-3 /  38-76 Flat Block Flat Surface


1-3 / 25-76 THERMAL PERFORMANCEMean Temperature Btu.in/(hr . ft² . 0 F)  W/mºC200ºF / 93ºC 0.54    0.078400ºF / 204ºC 0.61 0.088600ºF / 315ºC 0.67 0.097 800ºF / 427ºC 0.73 0.105SPECIFICATION COMPLIANCEASTM C533 Type II Material Speci~cation - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel -
Technical specifications as shown in this literature are intended to be used as general guidelines only. Please refer to the Safety Data Sheet and product label prior to using this product. The physical and chemical properties of the products listed herein represent typical, average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Any references to numerical flame spread or smoke developed ratings are 717 17th St.
Passes ASTM E136 Non-Combustible - Passes For more information, refer to product data sheet IND-305Super Caltemp Gold 1700 block is an inorganic, non-combustible, high-temperature insulation that is composed primarily of hydrous calcium silicate. The insulation is tailored for systems operating up to 1700°F (927°C). Super Caltemp Gold 1700 meets or exceeds the physical and thermal property requirements of ASTM C533, Type II.
not intended to reflect hazards presented by these or any other materials under actual fire Denver, CO 80202                    conditions. Check with the Regional Sales Office nearest you for current information.
Operating Temperature Limit: 1700°F (927°C)Facings Available      Sizes 1/2 - 2" are supplied with no facing Sizes 21/2" and above are supplied with a
800-866-3234 JM.com                              All Johns Manville products are sold subject to Johns Manvilles standard Terms and Conditions, which includes a Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville standard Terms and Conditions or for information on other Johns Manville thermal insulation and systems, visit www.jm.com/terms-conditions or call (800)654-3103.
~berglass mat facing Other facings available include: ASJ and FSK 6
IND-902 02/13/19 (Replaces 02/23/18)                                                               © 2019 Johns Manville All Rights Reserved}}
Insulkote ETWeather Protective Coating CalCoat-127 One Coat Finishing Cement Calbond Gold High-Temperature Glue Super Calstik High-Temperature Glue Developed as a high-quality protective coating, Insulkote ET is a compound of selected and processed bitumens and mineral ~llers. It is recommended for weather-protecting insulated vessels, tanks, piping, equipment and duct work. Insulkote ET is a non-vapor barrier, weather-proof coating for use over thermal insulation where "breathing" is required.
For more information, refer to product data sheet IND-10 CalCoat-127 is a proprietary blend of hydraulic cement, calcium silicate and inorganic mineral ~bers with corrosion inhibitors that provides a smooth ~nish over high-temperature insulation. CalCoat-127 is recommended for ~nishing use with calcium silicate or perlite insulation in high-temperature piping and equipment applications.
For more information, refer to product data sheet IND-13 CalBond Gold is a modi~ed, silicate-based glue for thermal insulations. It sets quickly to provide a high-temperature bond for porous insulating materials.
CalBond Gold is useful for bonding sections of calcium silicate or perlite high-temperature pipe or block insulation and to make mitered elbows, large insulating sections or other special shapes
.For more information, refer to product data sheet IND-11 Super Calstik is a modified, silicate-based glue. It sets quickly to provide a high-temperature bond for porous insulating materials. Super Calstik is used for bonding and sealing joints in Super Firetemp high-temperature insulation. It is used in walls, structural steel, cable trays and other fire-rated applications.For more information refer, to product data sheet IND-108 Accessories Insulation Product Accessories 7
Technical specifications as shown in this literature are intended to be used as general guidelines only. Please refer to the Safety Data Sheet and product label prior to using this product. The physical and chemical properties of the products listed herein represent typical, average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Any references to numerical flame spread or smoke developed ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions. Check with the Regional Sales Office nearest you for current information. All Johns Manville products are sold subject to Johns Manville's standard Terms and Conditions, which includes a Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville standard Terms and Conditions or for information on other Johns Manville thermal insulation and systems, visit www.jm.com/terms-conditions or call (800)654-3103.
717 17th St.
Denver, CO 80202 800-866-3234 JM.com© 2019 Johns Manville All Rights Reserved IND-902 02/13/19 (Replaces 02/23/18)}}

Revision as of 00:02, 8 October 2019

Mineral Wool Website
ML19235A078
Person / Time
Site: Surry  Dominion icon.png
Issue date: 08/19/2019
From: Alan Huynh
NRC/NRR/DMLR/MCCB
To:
Alan Huynh, NRR/DMLR/MCCB, 415-1137
Shared Package
ML19235A051 List:
References
Download: ML19235A078 (8)
v • d • e


Text

PRODUCT SELECTION GUIDE Industrial Insulation

AVAILABLE SHAPES AND SIZES Form Pipe Size in/mm Thickness in/mm Pipe Insulation 1/2 - 24 / 15-600 1-3 / 25-76 Thermo-1200' Quad Segments 20-37 / 500-925

Hex Pipe Covering 38-52 / 950-1300

1 1/2-3 / 38-76 1 1/2-3 / 38-76 Calcium Silicate Pipe & Block Insulation Curved Segments30-126 / 700-3200 1 1/2-3 / 38-76 3-V Scored Block 30 min / 750 min 1 1/2-4 / 38-102 Beveled Lags 126 min / 3200 min 1 1/2-3 / 38-76 Flat Block Flat Surface 1-4 / 25-102 THERMAL PERFORMANCE ASTM C335 (PIPE) ASTM C518 (FLAT)

Mean Temp. Btu.in/(hr . ft2 . 0F) W/mºC Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC .344 .050 .355 .051 200ºF / 93ºC .389 .056 .373 .054 300ºF / 149ºC .437 .063 .397 .057 400ºF / 204ºC .486 .070 .428 .062 500ºF / 260ºC .538 .078 .465 .067 600ºF / 316ºC .591 .085 .509 .559 700ºF / 371ºC .647 .093 .559 .081 Thermo-1200'* is a water-resistant, molded, high-temperature, SPECIFICATION COMPLIANCE ASTM C533 Type I Material Specification - Passes ASTM C795 / C871 / C692 Corrosion Austenitic abuse-resistant pipe and block insulation composed of hydrous ASTM C1617 Corrosion - Passes Stainless Steel - Passes calcium silicate. Recommended for use in the industrial processing ASTM E136 Non-Combustible - Passes and power generation industries. Integral to Thermo-1200' is XOX For more information, refer to product data sheet IND-303 Corrosion Inhibitor, a distinctive formula and process that actively *Thermo-1200' water resistant calcium silicate is not hydrophobic. Thermo-1200' is designed to be able to withstand short periods of rainfall without absorbing water in excess. The volume of water absorption depends on the duration of exposure and the amount of rainfall. The inhibits corrosion to outside surfaces of pipe and equipment. insulation is not meant to withstand extreme weather conditions without jacketing. While this new water resistant feature can be helpful during prolonged field installations, it is nevertheless recommended that an installer weatherproof and jacket the thermal insulation as soon Operating Temperature Limit: 1200°F (650°C) as it is feasibly possible. Should water enter the system, the corrosion inhibitors will still activate to continue to help combat corrosion at a chemical level, and once the system reaches operating temperatures, the water will vaporize and leave the system.

Sproule-1200' AVAILABLE SHAPES AND SIZES Form Pipe Size in/mm Thickness in/mm Expanded Perlite Pipe & Block Insulation Pipe Insulation 1/2 - 24 / 15-600 1- 4 / 25-102 Quad Segments 24 - 40 / 600-1000 1 1/2-3 / 38-76 Scored or V-Grooved Block 30 min / 750 min 1 1/2-4 / 38-102 Flat Block Flat Surface 1-4 / 25-102 THERMAL PERFORMANCE ASTM C335 (PIPE) ASTM C518 (FLAT)

Mean Temp. Btu.in/(hr . ft2 . 0F) W/mºC Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC .412 .059 .438 .063 200ºF / 93ºC .481 .069 .476 .069 300ºF / 149ºC .548 .079 .515 .074 400ºF / 204ºC .611 .088 .557 .080 500ºF / 260ºC .671 .097 .601 .087 600ºF / 316ºC .728 .105 .646 .093 700ºF / 371ºC .782 .113 .694 .100 Sproule-1200' is a preformed, high-temperature, non-wicking pipe and block insulation composed of expanded perlite that SPECIFICATION COMPLIANCE ASTM C610 Material Specification - Passes is uniformly reinforced with a high-strength fiber. Integral to ASTM C1617 Corrosion - Passes Sproule-1200' is XOX Corrosion Inhibitor, a distinctive formula ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes and process that actively inhibits corrosion to outside surfaces ASTM E136 Non-Combustible - Passes of pipe and equipment.

For more information, refer to product data sheet IND-200 Operating Temperature Limit: 1200°F (650°C)

InsulThin HT AVAILABLE SHAPES AND SIZES Hydrophobic Microporous Blanket Insulation Roll Size Roll Weight Dimensions 36 Wide 45lbs 10mm x 36 x 25

5mm x 36 x 50 60 Wide 75lbs 10mm x 60 x 25

5mm x 60 x 50 THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.189 0.027 200ºF / 93ºC 0.195 0.028 400ºF / 204ºC 0.213 0.031 600ºF / 316ºC 0.237 0.034 SPECIFICATION COMPLIANCE InsulThin HT is a high-temperature, hydrophobic, thin, flexible, ASTM C1676 Material Specification - Passes microporous blanket insulation. Microporous insulation is a ASTM C1617 Corrosion - Passes highly efficient insulation material and has been in service in a ASTM C665 Corrosivity to Steel - Passes variety of industrial and commercial insulation applications for ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes more than 35 years. ASTM E84 Surface Burning Characteristics - Flame Spread-0, Smoke Developed-0 Operating Temperature Limit: 1200°F (650°C) For more information, refer to product data sheet IND-700 2

MinWool-1200 Pipe AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Form Pipe Size in/mm Thickness in/mm One Piece 1/2 - 6 / 15-152 1-6 / 25-152 Two Piece 7-24 / 175-600 1-6 / 25-152 Four Piece 25-44 / 625-1100 1-6 / 25-152

(1/2 increments)

THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.23 0.033 200ºF / 93ºC 0.28 0.040 400ºF / 204ºC 0.40 0.058 600ºF / 316ºC 0.56 0.081 MinWool-1200 Pipe is a water-repellent pipe insulation made of SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types I, II, IV - Passes inorganic fibers derived from basalt, a volcanic rock. It is made ASTM C665 Corrosivity to Steel - Passes with a thermosetting resin binder. Advanced manufacturing BS EN 13472 Short-Term Water Absorption technology ensures consistent product quality, with high fiber density and low shot content, for excellent performance in high- For more information, refer to product data sheet IND-401 temperature, thermal control and fire-resistant applications.

Operating Temperature Limit: 1200°F (650°C)

MinWool-1200 Preformed Pipe AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Standard Thickness

Single Layer: 1-4 thick Double Layer: Over 4 thick in 1/2 increments Pipe Size: 1/2 - 36 Available in iron and copper tubing sizes THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.044 400ºF / 204ºC 0.44 0.064 600ºF / 316ºC 0.62 0.090 MinWool-1200 Preformed (PF) Pipe insulation is made of inorganic fibers derived from basalt, a volcanic rock. It is made with a SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types III - Passes thermosetting resin binder. PF Pipe insulation is a factory V-grooved ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes mineral wool board that is formed to specific pipe sizes and provided ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less in half cylinder sections with a variety of facing options.

Operating Temperature Limit: 1200°F (650°C) For more information, refer to product data sheet IND-423 MinWool-1200 Field-Formed Pipe AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Standard Thickness

Single Layer: 11/2-4 thick Double Layer: Over 4 thick in 1/2 increments Pipe Size: 21/2-72 Available in NPS pipe sizes and copper tubing sizes THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.044 400ºF / 204ºC 0.44 0.064 600ºF / 316ºC 0.62 0.090 MinWool-1200 Field-Formed Pipe insulation is made of inorganic SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types III - Passes fibers derived from basalt, a volcanic rock. It is made with a ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes thermosetting resin binder. Field-Formed Pipe insulation is a factory ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less V-grooved mineral wool board with a unique contact adhesive in the grooves. It is manufactured to specific pipe sizes with a variety of For more information, refer to product data sheet IND-420 facing options. It ships flat and allows for easy forming at the job site.

Operating Temperature Limit: 1200°F (650°C) 3

MinWool-1200 Precision Cut AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Standard Thickness Facings Available

Single Layer: 1-4 thick Sizes 1/2 - 2 are supplied with no facing Double Layer: Over 4 thick in 1/2 increments Sizes 21/2 and above are supplied with a Pipe Size: 1/2 -72 fiberglass mat facing Available in iron and copper tubing sizes Other facings available include: ASJ and FSK THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.044 400ºF / 204ºC 0.44 0.064 600ºF / 316ºC 0.62 0.090 MinWool-1200 Precision Cut (PC) Pipe insulation is made of SPECIFICATION COMPLIANCE ASTM C547 Material Specification Types III - Passes inorganic fibers derived from basalt, a volcanic rock. It is made with ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes thermosetting resin binder. PC Pipe insulation (without adhesive) is ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less a factory V-grooved mineral wool board manufactured to specific pipe or vessel sizes with a variety of facing options. It ships flat in For more information, refer to product data sheet IND-422 4 mil plastic and allows easy forming at the job site.

Operating Temperature Limit: 1200°F (650°C)

MinWool-1200 Pipe & Tank Wrap AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Roll Length ft/m Width in/m Thickness in/mm 18 / 5.5 48 / 1.22 11/2 / 40 16 / 4.9 48 / 1.22 2 / 50 14 / 4.3 48 / 1.22 21/2 / 65 12 / 3.7 48 / 1.22 3 / 75 10 / 3.1 48 / 1.22 31/2 / 90 8 / 2.4 48 / 1.22 4 / 100 THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.23 0.033 200ºF / 93ºC 0.28 0.040 400ºF / 204ºC 0.40 0.058 600ºF / 316ºC 0.56 0.081 MinWool-1200 Pipe & Tank Wrap insulation is made of SPECIFICATION COMPLIANCE inorganic fibers derived from basalt, a volcanic rock. It is made ASTM C553 Mineral Fiber Blanket Specification Types I, II,III,IV, V, VI - Passes with a thermosetting resin binder. Advanced manufacturing ASTM C665 Corrosivity to Steel - Passes technology ensures consistent product quality, with high fiber ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes ASTM E84 Surface Burning Characteristics / Flame Spread - 25, Smoke Developed - 50 or less density and low shot content, for excellent performance in high-ASTM E136 Non-Combustible - Passes (mineral wool only) temperature, thermal control and fire-resistant applications.

Operating Temperature Limit: 1200°F (650°C) For more information, refer to product data sheet IND-415 MinWool-1200 Lamella Tank Wrap AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Standard Thickness

Single Layer: 1-4 thick Facings Available

Standard is fiberglass mat Available with ASJ THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.29 0.042 200ºF / 93ºC 0.36 0.052 400ºF / 204ºC 0.54 0.078 600ºF / 316ºC 0.82 0.118 SPECIFICATION COMPLIANCE MinWool-1200 Lamella Tank Wrap is a flexible mineral wool wrap ASTM C1393 Material Specification / Complies ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes insulation. It is a lightweight, high-performance insulation for high-ASTM E84 Surface Burning Characteristics / Flame Spread - 25, Smoke Developed - 50 or less temperature applications. This insulation is produced to fit large ASTM E136 Non-Combustible - Passes (mineral wool only) diameter pipe, duct, tanks and equipment, ranging in temperatures from below ambient up to 1000°F continuous maximum service temperature. For more information, refer to product data sheet IND-424 Operating Temperature Limit: 1200°F (650°C) 4

MinWool-1200 Industrial Board AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Nominal Densities (lb/ft3/kg/m3) Sizes in/mm Thicknesses in/mm 1240 (4 / 48) 24 x 48 / 610 x 1219 1-4 / 25-102 1260 (6 / 96) 36 x 48 / 914 x 1219 (All Densities) 1280 (8 / 128) (All Densities) Foil Scrim Polyethylene 1210 (10 / 160) (FSP) facing may be 1212 (12 / 192) available on a

made-to-order basis THERMAL PERFORMANCE*

Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.043 400ºF / 204ºC 0.42 0.061 600ºF / 316ºC 0.56 0.081 MinWool-1200 Industrial Board insulation is made of inorganic SPECIFICATION COMPLIANCE ASTM C612 Material Specification - Complies fibers derived from basalt, a volcanic rock. It is made with a ASTM C665 Corrosivity to Steel - Passes thermosetting resin binder. Advanced manufacturing technology ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes ensures consistent product quality, with high fiber density and ASTM E136 Non-Combustible - Passes low shot content, for excellent performance in high-temperature,

  • Thermal Performance listed for 1280 density only - for other densities and more information, refer to thermal control and fire-resistant applications. product data sheet IND-402

Operating Temperature Limit: 1200°F (650°C) 1 thickness available in 8#, 10# and 12# densities only MinWool-1200 Flex Batt AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Nominal Densities (lb/ft3/kg/m3) Sizes in/mm Thicknesses in/mm 1240 (4 / 48) 24 x 48 / 610 x 1219 1-4 / 25-102 1260 (6 / 96) 36 x 48 / 914 x 1219 (All Densities) 1280 (8 / 128) (All Densities) 1210 (10 / 160)

1212 (12 / 192)

THERMAL PERFORMANCE*

Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.043 400ºF / 204ºC 0.42 0.061 600ºF / 316ºC 0.56 0.081 MinWool-1200 Flexible Batt insulation is made of inorganic SPECIFICATION COMPLIANCE ASTM C612 Material Specification - Complies fibers derived from basalt, a volcanic rock. It is made with a ASTM C665 Corrosivity to Steel - Passes thermosetting resin binder. Advanced manufacturing technology ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes ensures consistent product quality, with high fiber density and ASTM E136 Non-Combustible - Passes low shot content, for excellent performance in high-temperature,

  • Thermal Performance listed for 1280 density only - for other densities and more information, refer to thermal control and fire-resistant applications. product data sheet IND-406

Operating Temperature Limit: 1200°F (650°C) 1 thickness available in 8#, 10# and 12# densities only MinWool-1200 Metal Mesh Blanket AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Standard Thickness

Single Layer: 1-4 thick in 1/2 increments Standard Width: 24 Standard Length: 48 THERMAL PERFORMANCE*

Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.043 400ºF / 204ºC 0.42 0.061 600ºF / 316ºC 0.56 0.081 SPECIFICATION COMPLIANCE ASTM C592 Specification of Metal Mesh Covered Blanket Type I,II,III - Complies ASTM C665 Corrosivity to Steel - Passes MinWool-1200 Metal Mesh Blanket (MMB) insulation is made ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes of inorganic fibers derived from basalt, a volcanic rock, with ASTM E136 Non-Combustible - Passes a thermosetting resin binder. MMB is a mineral wool blanket

  • Thermal Performance listed for 1280 density only - for other densities and more available with a variety of metal mesh options mechanically information, refer to product data sheet IND-406 applied to one or both surfaces.

Operating Temperature Limit: 1200°F (650°C) 5

MinWool-1200 Mitered Fittings AVAILABLE SHAPES AND SIZES Mineral Wool Insulation Standard Thickness Facings Available

Single Layer: 1-4 thick Sizes 1/2 - 2 are supplied with no facing Double Layer: Over 4 thick in 1/2 increments Sizes 21/2 and above are supplied with a Sizes available up to a 72 IPS but vary by thickness fiberglass mat facing Available in NPS pipe sizes and copper tubing sizes Other facings available include: ASJ and FSK THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 100ºF / 38ºC 0.25 0.036 200ºF / 93ºC 0.30 0.044 400ºF / 204ºC 0.44 0.064 600ºF / 316ºC 0.62 0.090 MinWool-1200 Mitered Fittings are made of inorganic fibers derived from basalt, a volcanic rock. It is made with thermosetting resin SPECIFICATION COMPLIANCE ASTM C547 / C585 MICA Fabrication Standards - Complies binder. These mitered and bonded fittings are for standard short and ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes long radius and non-standard radius sweep elbows found in normal ASTM E84 Surface Burning Characteristics - Flame Spread - 25, Smoke Developed - 50 or less piping schemes. Fittings are manufactured from MinWool-1200 Preformed Pipe Insulation and mitered into precision segments. For more information, refer to product data sheet IND-419 Operating Temperature Limit: 1200°F (650°C)

Super Caltemp Gold 1700 AVAILABLE SHAPES AND SIZES Calcium Silicate Pipe & Block Insulation Form Pipe Size in/mm Thickness in/mm 3-V Scored Block 30 min / 750 min 1 1/2-3 / 38-76 Flat Block Flat Surface 1-3 / 25-76 THERMAL PERFORMANCE Mean Temperature Btu.in/(hr . ft2 . 0F) W/mºC 200ºF / 93ºC 0.54 0.078 400ºF / 204ºC 0.61 0.088 600ºF / 315ºC 0.67 0.097 800ºF / 427ºC 0.73 0.105 Super Caltemp Gold 1700 block is an inorganic, non-combustible, SPECIFICATION COMPLIANCE high-temperature insulation that is composed primarily of hydrous ASTM C533 Type II Material Specification - Passes ASTM C795 / C871 / C692 Corrosion Austenitic Stainless Steel - Passes calcium silicate. The insulation is tailored for systems operating up ASTM E136 Non-Combustible - Passes to 1700°F (927°C). Super Caltemp Gold 1700 meets or exceeds the physical and thermal property requirements of ASTM C533, Type II.

Operating Temperature Limit: 1700°F (927°C) For more information, refer to product data sheet IND-305 Super Firetemp AVAILABLE TYPES AND SIZES High-Temperature Insulation Types Board Dimensions Thickness in/mm Super Firetemp L 4ft x 8ft 3/4 - 3 / 13 - 76 Super Firetemp M 4ft x 8ft 1/2 - 3 / 13 - 76 Super Firetemp H 4ft x 8ft 1/2 -2 / 13 - 51 Super Firetemp X 4ft x 8ft 1/2 - 2 / 13 - 51 Super Firetemp S 4ft x 8ft 1/2 - 11/2 / 13 - 38

(1/2 increments)

AVAILABLE DENSITIES Type Density (Avg.) ASTM C656 Super Firetemp L 20 pcf (288 kg / m3) Type II, Grade 5 Super Firetemp M 28 pcf (449 kg / m3) Type II, Grade 6 Super Firetemp H 35 pcf (561 kg / m3) Type II, Grade 6 Super Firetemp X 40 pcf (641 kg / m ) 3 Type II, Grade 7 Super Firetemp S 55 pcf (881 kg / m ) 3 Type II, Grade 8 Super Firetemp boards are inorganic, high-temperature boards SPECIFICATION COMPLIANCE ASTM C795 Corrosion Austenitic Stainless Steel - Passes with exceptional strength and insulating qualities, produced ASTM E136 Non-Combustible - Passes in various densities. Super Firetemp boards are suitable for fire protection applications, refractory backup, and can be For more information, refer to product data sheets:

machined into component parts of many shapes and sizes. IND-103(L), IND-104(M), IND-105(H), IND-106(X), IND-107(S)

Continuous Temperature Limit: Varies by product type 6

Accessories Insulation Product Accessories Insulkote ET Calbond Gold Weather Protective Coating High-Temperature Glue Developed as a high-quality protective coating, Insulkote CalBond Gold is a modified, silicate-based glue for ET is a compound of selected and processed bitumens thermal insulations. It sets quickly to provide a high-and mineral fillers. It is recommended for weather- temperature bond for porous insulating materials.

protecting insulated vessels, tanks, piping, equipment CalBond Gold is useful for bonding sections of calcium and duct work. Insulkote ET is a non-vapor barrier, silicate or perlite high-temperature pipe or block weather-proof coating for use over thermal insulation insulation and to make mitered elbows, large insulating where breathing is required. sections or other special shapes.

For more information, refer to product data sheet IND-10 For more information, refer to product data sheet IND-11 CalCoat-127 Super Calstik One Coat Finishing Cement High-Temperature Glue CalCoat-127 is a proprietary blend of hydraulic cement, Super Calstik is a modified, silicate-based glue. It sets calcium silicate and inorganic mineral fibers with quickly to provide a high-temperature bond for porous corrosion inhibitors that provides a smooth finish insulating materials. Super Calstik is used for bonding over high-temperature insulation. CalCoat-127 is and sealing joints in Super Firetemp high-temperature recommended for finishing use with calcium silicate insulation. It is used in walls, structural steel, cable or perlite insulation in high-temperature piping and trays and other fire-rated applications.

equipment applications.

For more information refer, to product data sheet IND-108 For more information, refer to product data sheet IND-13 7

Technical specifications as shown in this literature are intended to be used as general guidelines only. Please refer to the Safety Data Sheet and product label prior to using this product. The physical and chemical properties of the products listed herein represent typical, average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Any references to numerical flame spread or smoke developed ratings are 717 17th St.

not intended to reflect hazards presented by these or any other materials under actual fire Denver, CO 80202 conditions. Check with the Regional Sales Office nearest you for current information.

800-866-3234 JM.com All Johns Manville products are sold subject to Johns Manvilles standard Terms and Conditions, which includes a Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville standard Terms and Conditions or for information on other Johns Manville thermal insulation and systems, visit www.jm.com/terms-conditions or call (800)654-3103.

IND-902 02/13/19 (Replaces 02/23/18) © 2019 Johns Manville All Rights Reserved

Retrieved from "https://kanterella.com/w/index.php?title=ML19235A078&oldid=1892202"