|
---|
Category:Letter
MONTHYEARIR 05000382/20230102024-01-31031 January 2024 Comprehensive Engineering Team Inspection Report 05000382/2023010 IR 05000382/20230032024-01-23023 January 2024 Acknowledgment of Reply to a Notice of Violation NRC Inspection Report 05000382/2023003 ML24012A1962024-01-12012 January 2024 Response to 2nd Round Request for Additional Information Concerning Relief Request Number EN-RR-22-001 Proposed Alternative to Use ASME Code Case N-752, Risk-Informed Categorization and ML23340A2292023-12-28028 December 2023 Withdrawal of an Amendment Request to Revise Technical Specification 3/4.3.2 to Remove Exemption from Testing Certain Relays at Power to Support Elimination of Potential Single Point Vulnerability (EPID L-2022-LLA-0169)-LTR ML23349A1672023-12-21021 December 2023 Request for Withholding Information from Public Disclosure ML23348A3572023-12-14014 December 2023 Application to Revise Technical Specifications to Use Online Monitoring Methodology Slides and Affidavit for Pre-Submittal Meeting ML23352A0292023-12-13013 December 2023 Entergy - 2024 Nuclear Energy Liability Evidence of Financial Protection ML23340A1592023-12-13013 December 2023 Entergy Operations, Inc. - Entergy Fleet Project Manager Assignment ML23333A1362023-11-29029 November 2023 Supplement to Request for Exemption from Enhanced Weapons, Firearms Background Checks, and Security Event Notifications Implementation ML23325A1442023-11-21021 November 2023 Request for Exemption from Enhanced Weapons, Firearms Background Checks, and Security Event Notifications Implementation ML23312A1832023-11-14014 November 2023 Integrated Inspection Report 05000382/2023003 and Notice of Violation ML23311A2082023-11-0909 November 2023 Reassignment of U.S. Nuclear Regulatory Commission Branch Chief in the Division of Operating Reactor Licensing for Plant Licensing Branch IV IR 05000382/20234012023-10-0404 October 2023 Cyber Security Inspection Report 05000382/2023401 (Cover Letter Only) IR 05000382/20230052023-08-21021 August 2023 Updated Inspection Plan for Waterford Steam Electric Station, Unit 3 - (Report 05000382/2023005) IR 05000382/20233012023-08-15015 August 2023 NRC Initial Operator Licensing Examination Approval 05000382/2023301 IR 05000382/20230022023-08-0808 August 2023 Integrated Inspection Report 05000382/2023002 IR 05000382/20234022023-08-0707 August 2023 NRC Security Inspection Report 05000382/2023402 (Full Report) IR 05000382/20230402023-07-12012 July 2023 Revised 95001 Supplemental Inspection Report 05000382/2023040, Exercise of Enforcement Discretion, and Follow-Up Assessment Letter ML23191A4562023-07-10010 July 2023 Notification of Comprehensive Engineering Team Inspection (050003822023010) and Request for Information ML23158A1042023-06-0808 June 2023 Information Request for the Cybersecurity Baseline Inspection, Notification to Perform Inspection 05000382/2023401 ML23145A2272023-06-0202 June 2023 95001 Supplemental Inspection Report 05000382/2023040, and Exercise of Enforcement Discretion ML23130A2732023-05-10010 May 2023 and Waterford 3 Steam Electric Station - Response to Regulatory Issue Summary 2023-01, Preparation and Scheduling of Operator Licensing Examinations ML23117A2172023-05-0101 May 2023 Safety Evaluation for Quality Assurance Program Manual Reduction in Commitment IR 05000382/20230012023-04-24024 April 2023 Integrated Inspection Report 05000382/2023001, Independent Spent Fuel Storage Installation Report 07200075/2023001, and Exercise of Enforcement Discretion ML23111A2132023-04-21021 April 2023 Responses to RAI Concerning Relief Request Number EN-RR-22-001 Proposed Alternative to Use ASME Code Case N-752, Risk-Informed Categorization and Treatment for Repair/ Replacement Activities ML23110A1122023-04-20020 April 2023 Annual Report for Entergy Quality Assurance Program Manual Changes Under 10 CFR 50.54(a)(3), 10 CFR 71.106, and 10 CFR 72.140(d). Notification of Application of Approved Appendix B to 10 CFR 72 Subpart G ML23108A2542023-04-18018 April 2023 WCGS Information Request, Security IR 2023401 IR 05000382/20234032023-04-17017 April 2023 Security Baseline Inspection Report 05000382/2023403 ML23093A2122023-04-0303 April 2023 Annual Report on Westinghouse Electric Company LLC Combustion Engineering Emergency Core Cooling System Performance Evaluation Models for Calendar Year 2022 ML23089A0602023-03-30030 March 2023 Entergy Operations, Inc. - Fleet Project Manager Assignment ML23088A3922023-03-29029 March 2023 Nuclear Onsite Property Damage Insurance (10 CFR 50.54(w)(3)) ML23080A2882023-03-21021 March 2023 Decommissioning Funding Status Report Per 10 CFR 50.75(f)(1) Entergy Operations, Inc ML23059A2592023-03-0707 March 2023 Correction to Issuance to Amendment No. 270 Adoption of TSTF-505, Revision 2, Provide Risk-Informed Extended Completion Times - RITSTF Initiative 4b ML23065A2002023-03-0303 March 2023 EN 56252 Update - Flow Serve - Final Notification of Potential Part 21 on Peerless 56 Frame DC Motors ML23060A1092023-03-0101 March 2023 Proof of Financial Protection (10 CFR 140.15) IR 05000382/20220062023-03-0101 March 2023 Annual Assessment Letter for Waterford Steam Electric Station, Unit 3, (Report 05000382/2022006) ML22322A1092023-02-17017 February 2023 Issuance of Amendment No. 270 Adoption of TSTF-505, Revision 2, Provide Risk-Informed Extended Completion Times - RITSTF Initiative 4b IR 05000382/20230902023-02-0101 February 2023 Final Significance Determination of a White Finding, NOV, and Follow-Up Assessment Letter; NRC Inspection Report 05000382/2023090 ML23032A5062023-02-0101 February 2023 Technical Specification Index and Bases Update to the NRC for the Period November 11, 2021 Through July 25, 2022 ML23030A6642023-01-27027 January 2023 Flowserve, Part 21 Second Interim Notification Report Re Peerless 56 Frame DC Motors IR 05000382/20220042023-01-26026 January 2023 Integrated Inspection Report 05000382/2022004 and Independent Fuel Storage Installation Inspection Report 07200075/2022001 ML23024A0822023-01-20020 January 2023 Stephens Insurance, Entergy - 2023 Nuclear Energy Liability Evidence of Financial Protection ML23018A2202023-01-18018 January 2023 Quality Assurance Program Manual Reduction in Commitment IR 05000382/20220912023-01-12012 January 2023 Emergency Preparedness Inspection Report 05000382/2022091 and Preliminary White Finding and Apparent Violation IR 05000382/20220032023-01-0505 January 2023 Revised Integrated Inspection Report 05000382/2022003 ML22342B1402022-12-0202 December 2022 56252-EN 56252 - Flowserve - Limitorque - Interim Report Potential Part 21 on Peerless 56 Frame DC Motors ML22300A2082022-11-30030 November 2022 Issuance of Amendment No. 269 Adoption of 10 CFR 50.69, Risk-Informed Categorization and Treatment of Structures, Systems and Components for Nuclear Power Reactors ML22332A5292022-11-29029 November 2022 Notification of NRC Initial Operator Licensing Examination 05000382/2023301 IR 05000382/20220132022-11-28028 November 2022 Design Basis Assurance Inspection (Programs) Inspection Report 05000382/2022013 IR 05000382/20220022022-11-0101 November 2022 Revised Integrated Inspection Report 05000382/2022002 2024-01-31
[Table view] Category:License-Application for Facility Operating License (Amend/Renewal) DKT 50
MONTHYEARW3F1-2023-0035, Application for Technical Specification Change to Revise Surveillance Requirements Included in the Surveillance Frequency Control Program2023-07-26026 July 2023 Application for Technical Specification Change to Revise Surveillance Requirements Included in the Surveillance Frequency Control Program W3F1-2021-0061, Supplement to License Amendment Request to Relocate Chemical Detection Systems Technical Specifications to Technical Requirements Manual2021-10-14014 October 2021 Supplement to License Amendment Request to Relocate Chemical Detection Systems Technical Specifications to Technical Requirements Manual ML21279A2312021-10-0606 October 2021 Application to Revise Technical Specifications to Adopt TSTF-554, Revise Reactor Coolant Leakage Requirements Using the Consolidated Line-Item Improvement ML21266A1612021-09-23023 September 2021 Application to Revise Technical Specifications to Adopt TSTF-541, Add Exceptions to Surveillance Requirements for Valves and Dampers Locked in the Actuated W3F1-2021-0039, Application for Technical Specification Change to Revise Pressure/Temperature and Low Temperature Overpressure Protection for 55 Effective Full Power Years2021-08-25025 August 2021 Application for Technical Specification Change to Revise Pressure/Temperature and Low Temperature Overpressure Protection for 55 Effective Full Power Years W3F1-2021-0055, Supplement to License Amendment Request to Relocate Boration Systems Technical Specifications to the Technical Requirements Manual2021-08-20020 August 2021 Supplement to License Amendment Request to Relocate Boration Systems Technical Specifications to the Technical Requirements Manual ML21182A1582021-07-0101 July 2021 Application to Revise Technical Specifications to Adopt TSTF 577, Revised Frequencies for Steam Generator Tube Inspections ML21175A3622021-06-24024 June 2021 Application to Revise Technical Specifications to Adopt TSTF-569, Revision of Response Time Testing Definitions ML21148A1042021-05-28028 May 2021 Application to Revise Technical Specifications to Adopt TSTF-563, Revise Instrument Testing Definitions to Incorporate the Surveillance Frequency Control Program W3F1-2021-0032, Revised License Amendment Request - Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System2021-05-21021 May 2021 Revised License Amendment Request - Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System W3F1-2021-0027, Supplement to Application for Technical Specification Change to Adopt Risk-Informed Extended Completion Times - RITSTF Initiative 4b2021-04-0808 April 2021 Supplement to Application for Technical Specification Change to Adopt Risk-Informed Extended Completion Times - RITSTF Initiative 4b W3F1-2021-0026, Open Item Response, License Amendment Request to Implement a Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System2021-03-19019 March 2021 Open Item Response, License Amendment Request to Implement a Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System W3F1-2021-0003, Application for Technical Specification Change to Adopt Risk-Informed Extended Completion Times - RITSTF Initiative 4B2021-02-0808 February 2021 Application for Technical Specification Change to Adopt Risk-Informed Extended Completion Times - RITSTF Initiative 4B W3F1-2021-0002, Open Item Response - License Amendment Request to Implement a Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System2021-01-22022 January 2021 Open Item Response - License Amendment Request to Implement a Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System W3F1-2020-0038, License Amendment Request to Implement a Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System2020-07-23023 July 2020 License Amendment Request to Implement a Digital Upgrade to the Core Protection Calculator (CPC) System and Control Element Assembly Calculator (Ceac) System W3F1-2020-0017, Transmittal of Slides for Fourth Partially Closed Pre-submittal Meeting with Entergy Operations, Inc. to Discuss a Planned License Amendment Request for Digital Instrumentation and Control Modification2020-03-12012 March 2020 Transmittal of Slides for Fourth Partially Closed Pre-submittal Meeting with Entergy Operations, Inc. to Discuss a Planned License Amendment Request for Digital Instrumentation and Control Modification W3F1-2019-0073, (Waterford 3) - License Amendment Request to Revise Technical Specification 3.8.1.1 Surveillance Requirements2019-10-24024 October 2019 (Waterford 3) - License Amendment Request to Revise Technical Specification 3.8.1.1 Surveillance Requirements W3F1-2019-0062, License Amendment Request to Relocate Boration Systems Technical Specifications to the Technical Requirements Manual2019-09-20020 September 2019 License Amendment Request to Relocate Boration Systems Technical Specifications to the Technical Requirements Manual W3F1-2019-0047, Application for Technical Specification Change to Control Room Air Conditioning System2019-08-27027 August 2019 Application for Technical Specification Change to Control Room Air Conditioning System CNRO-2019-00003, Application to Revise Technical Specifications to Adopt TSTF-529 11 Clarify Use and Application Rules, 11 Revision 42019-01-31031 January 2019 Application to Revise Technical Specifications to Adopt TSTF-529 11 Clarify Use and Application Rules, 11 Revision 4 W3F1-2018-0043, Amendment 2 to License Renewal Application2018-07-30030 July 2018 Amendment 2 to License Renewal Application W3F1-2018-0031, Supplemental Information Supporting the License Amendment Request Regarding Use of the Tranflow Code for Determining the Pressure Drops Across the Steam Generator Secondary Side Internal Components2018-06-13013 June 2018 Supplemental Information Supporting the License Amendment Request Regarding Use of the Tranflow Code for Determining the Pressure Drops Across the Steam Generator Secondary Side Internal Components W3F1-2018-0025, (Waterford 3) - Supplemental Information Supporting the License Amendment Request Regarding Proposed Change to Technical Specification 3/4.7.4 for Ultimate Heat Sink Design Basis Update2018-05-17017 May 2018 (Waterford 3) - Supplemental Information Supporting the License Amendment Request Regarding Proposed Change to Technical Specification 3/4.7.4 for Ultimate Heat Sink Design Basis Update W3F1-2018-0014, License Amendment Request for Use of the Tranflow Code for Determining the Pressure Drops Across the Steam Generator Secondary Side Internal Components2018-04-12012 April 2018 License Amendment Request for Use of the Tranflow Code for Determining the Pressure Drops Across the Steam Generator Secondary Side Internal Components W3F1-2017-0050, License Amendment Request - Proposed Change to Technical Specification 3/4.7.4 for Ultimate Heat Sink Design Basis Update2018-03-26026 March 2018 License Amendment Request - Proposed Change to Technical Specification 3/4.7.4 for Ultimate Heat Sink Design Basis Update W3F1-2018-0011, License Amendment Request to Update the Results for the Inadvertent Loading of a Fuel Assembly Into the Improper Position (Fuel Assembly Misload) Event2018-03-0808 March 2018 License Amendment Request to Update the Results for the Inadvertent Loading of a Fuel Assembly Into the Improper Position (Fuel Assembly Misload) Event W3F1-2017-0067, License Amendment Request to Remove Technical Specification 3/4.3.2 Table 4.3-2 Note 3 Exemption for Testing Relays K114, K305, and K3132017-12-0606 December 2017 License Amendment Request to Remove Technical Specification 3/4.3.2 Table 4.3-2 Note 3 Exemption for Testing Relays K114, K305, and K313 W3F1-2017-0065, License Amendment Request for Use of RAPTOR-M3G Code for Neutron Fluence Calculations2017-11-28028 November 2017 License Amendment Request for Use of RAPTOR-M3G Code for Neutron Fluence Calculations W3F1-2017-0081, Amendment 1 to License Renewal Application (Laa)2017-11-15015 November 2017 Amendment 1 to License Renewal Application (Laa) ML17268A2132017-09-21021 September 2017 ISFSI, River Bend Station Unit 1 & ISFSI, Waterford 3 Steam Electric Station & ISFSI, Grand Gulf Nuclear Station & ISFSI, Application for Order Approving Transfers of Licenses and Conforming License Amendments W3F1-2017-0025, License Amendment Request for Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-501, Revision 1, Relocate Stored Fuel Oil and Lube Oil Volume Values to Licensee Control.2017-03-28028 March 2017 License Amendment Request for Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-501, Revision 1, Relocate Stored Fuel Oil and Lube Oil Volume Values to Licensee Control. W3F1-2016-0055, License Amendment Request to Revise Technical Specification 3/4.3.2 to Relocate Surveillance Frequency Requirements for Engineered Safety Features Actuation System (ESFAS) Subgroup Relays to the Surveillance Frequency Control Program2016-09-0101 September 2016 License Amendment Request to Revise Technical Specification 3/4.3.2 to Relocate Surveillance Frequency Requirements for Engineered Safety Features Actuation System (ESFAS) Subgroup Relays to the Surveillance Frequency Control Program W3F1-2016-0036, Application to Revise Technical Specifications to Adopt TSTF-545, Rev 3, TS Inservice Testing Program Removal & Clarify SR Usage Rule Application to Section 5.5 Testing, and to Request an Alternative to the ASME Code2016-07-25025 July 2016 Application to Revise Technical Specifications to Adopt TSTF-545, Rev 3, TS Inservice Testing Program Removal & Clarify SR Usage Rule Application to Section 5.5 Testing, and to Request an Alternative to the ASME Code W3F1-2016-0049, Supplement to the Risk-Informed Surveillance Requirements License Amendment Request (LAR)2016-07-12012 July 2016 Supplement to the Risk-Informed Surveillance Requirements License Amendment Request (LAR) ML16088A3312016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 1 of 9) ML16088A3252016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 3 of 9) W3F1-2016-0012, License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 9 of 9)2016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 9 of 9) ML16088A3292016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 7 of 9) ML16088A3282016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 6 of 9) ML16088A3272016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 5 of 9) ML16088A3262016-03-23023 March 2016 License Renewal Application Waterford Steam Electric Station, Unit 3 (Waterford 3) (Part 4 of 9) W3F1-2015-0040, License Amendment Request to Revise Control Element Assembly Drop Times Associated with Technical Specification 3.1.3.42015-07-0202 July 2015 License Amendment Request to Revise Control Element Assembly Drop Times Associated with Technical Specification 3.1.3.4 W3F1-2015-0037, License Amendment Request, Cyber Security Plan Implementation Schedule2015-06-29029 June 2015 License Amendment Request, Cyber Security Plan Implementation Schedule ML15170A1262015-06-17017 June 2015 Application for Technical Specification Change Regarding Risk-Informed Waterford Steam Electric Station, Unit 3 - Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program. Part 5 of 5 ML15170A1252015-06-17017 June 2015 Application for Technical Specification Change Regarding Risk-Informed Waterford Steam Electric Station, Unit 3 - Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program. Part 4 of 5 W3F1-2015-0006, Application for Technical Specification Change Regarding Risk-Informed Waterford Steam Electric Station, Unit 3 - Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program. Part2015-06-17017 June 2015 Application for Technical Specification Change Regarding Risk-Informed Waterford Steam Electric Station, Unit 3 - Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program. Part 3 of 5 ML15170A1232015-06-17017 June 2015 Application for Technical Specification Change Regarding Risk-Informed Waterford Steam Electric Station, Unit 3 - Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program. Part 2 of 5 ML15170A1222015-06-17017 June 2015 Application for Technical Specification Change Regarding Risk-Informed Waterford Steam Electric Station, Unit 3 - Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program. Part 1 of 5 W3F1-2014-0052, License Amendment Request Technical Specification Change to Extend the Type a Test Frequency to 15 Years2014-08-28028 August 2014 License Amendment Request Technical Specification Change to Extend the Type a Test Frequency to 15 Years ML14217A4962014-08-0404 August 2014 Attachment 1 - W3F1-2014-0005 - Waterford Steam Electric Station, Unit 3, Analysis of Proposed Operating License Change, Section 4 Thru 6, Including Attachment 2 and 3 2023-07-26
[Table view] Category:Technical Specifications
MONTHYEARML23348A3572023-12-14014 December 2023 Application to Revise Technical Specifications to Use Online Monitoring Methodology Slides and Affidavit for Pre-Submittal Meeting W3F1-2023-0035, Application for Technical Specification Change to Revise Surveillance Requirements Included in the Surveillance Frequency Control Program2023-07-26026 July 2023 Application for Technical Specification Change to Revise Surveillance Requirements Included in the Surveillance Frequency Control Program ML22104A2222022-05-12012 May 2022 Issuance of Amendments Revise Technical Specifications to Adopt TSTF 554 ML22075A1022022-04-29029 April 2022 Issuance of Amendment No. 264 to Relocate Chemical Detection System Technical Specifications to Technical Requirements Manual ML21279A2312021-10-0606 October 2021 Application to Revise Technical Specifications to Adopt TSTF-554, Revise Reactor Coolant Leakage Requirements Using the Consolidated Line-Item Improvement ML21148A0522021-06-0808 June 2021 Correction to License Amendment 214 Request to Support Next Generation Fuel; Review and Approval of Revised ECCS Performance Analysis; and Review and Approval of Supplement to the ECCS Performance Analysis ML21116A1432021-04-26026 April 2021 (Waterford 3) - Revision to License Amendment Request to Relocate Boration Systems Technical Specifications to the Technical Requirements Manual ML20148M1062020-06-22022 June 2020 Corrections to Technical Specifications Issued in Amendments Nos. 102 and 225 and with the Renewed License ML20113E8362020-04-23023 April 2020 Summary of March 19, 2020, Category 1 Public Meeting with Entergy Operations Inc. a Planned LAR to Install Digital Systems in Accordance with Di&C ISG-06 Revision 2, Licensing Processes at Waterford Steam Electric Station ML19175A0422019-09-11011 September 2019 Arkansas Units 1 and 2; Grand Gulf, Unit 1; Indian Point 2 and 3; Palisades; River Bend, Unit 1; Waterford Unit 3 - Issuance of Amendments to Adopt TSTF-529, Clarify Use and Application Rules ML19022A3372019-02-13013 February 2019 Issuance of Amendment No. 253 to Revise Section 15.4.3.1 of the Updated Final Safety Analysis Report to Account for Fuel Misload ML17192A0072017-07-27027 July 2017 Issuance of Amendment No. 250 Adoption of Technical Specifications Task Force Traveler TSTF 545, Revision 3 ML16077A2702016-05-10010 May 2016 Issuance of Amendment No. 247 Regarding Cyber Security Plan Milestone 8 Full Implementation Schedule W3F1-2016-0010, Responses to Request for Additional Information Regarding the Risk-Informed Surveillance Requirements License Amendment Request (LAR)2016-03-0303 March 2016 Responses to Request for Additional Information Regarding the Risk-Informed Surveillance Requirements License Amendment Request (LAR) ML15289A1432015-11-13013 November 2015 Redacted - Issuance of Amendment No. 246 Changes to Technical Specification 3.1.3.4 Regarding Control Element Assembly Drop Times ML15244B3862015-09-0303 September 2015 Correction to Issuance of Amendment Extension of the Integrated Leak Rate Testing to 15 Years ML15139A4832015-08-31031 August 2015 Issuance of Amendment No. 245 Change to Updated Final Safety Analysis Report Clarifying Pressurizer Heaters Function for Natural Circulation at the Onset of a Loss of Offsite Power ML15217A1432015-08-24024 August 2015 Issuance of Amendment No. 244 Extension of the Integrated Leak Rate Testing to 15 Years ML15138A4402015-08-14014 August 2015 Orders Approving Transfer of Facility Operating Licenses and Indirect Transfer, Draft Conforming Amendment, and Safety Evaluation W3F1-2015-0061, Provides Supplement to Revise Control Element Assembly Drop Times Associated with Technical Specification 3.1.3.42015-08-14014 August 2015 Provides Supplement to Revise Control Element Assembly Drop Times Associated with Technical Specification 3.1.3.4 ML15174A2272015-07-29029 July 2015 Issuance of Amendment of Technical Specifications s 3.9.6 and 3.9.7 to the Technical Requirements Manual ML14321A7132014-12-10010 December 2014 Issuance of Amendment No. 241, Revise Operating License Condition for Change to Cyber Security Plan Milestone 8 Full Implementation Date W3F1-2014-0052, License Amendment Request Technical Specification Change to Extend the Type a Test Frequency to 15 Years2014-08-28028 August 2014 License Amendment Request Technical Specification Change to Extend the Type a Test Frequency to 15 Years CNRO-2012-00009, Entergy Responses to Request for Additional Information Regarding Changes to the Quality Assurance Program Manual & Associated Plant Technical Specifications Re Staff Qualifications2012-11-20020 November 2012 Entergy Responses to Request for Additional Information Regarding Changes to the Quality Assurance Program Manual & Associated Plant Technical Specifications Re Staff Qualifications W3F1-2012-0084, Technical Specification Change for Dry Cooling Tower Fans Out of Service for Ultimate Heat Sink2012-10-0808 October 2012 Technical Specification Change for Dry Cooling Tower Fans Out of Service for Ultimate Heat Sink W3F1-2012-0028, Supplement 2 of License Amendment Request to Revise Technical Specification 3/4.7.4 Table 3.7-3, Ultimate Heat Sink Minimum Fan Requirements Per Train2012-05-22022 May 2012 Supplement 2 of License Amendment Request to Revise Technical Specification 3/4.7.4 Table 3.7-3, Ultimate Heat Sink Minimum Fan Requirements Per Train W3F1-2011-0067, License Amendment Request, Proposed Change to Technical Specification 3/4.7.4 Table 3.7-3, Ultimate Heat Sink Minimum Fan Requirements Per Train.2011-10-13013 October 2011 License Amendment Request, Proposed Change to Technical Specification 3/4.7.4 Table 3.7-3, Ultimate Heat Sink Minimum Fan Requirements Per Train. ML1125103192011-09-20020 September 2011 Correction of an Error in Amendment No. 226, Administrative Changes to Technical Specifications 6.9.1.11 and 6.9.1.11.1 Relating to Core Operating Limits Report ML1109501232011-04-0404 April 2011 Attachment 2 to W3F1-2011-0021, Proposed Operating License Change (Mark-up) and Attachment 3, Revised Operating License Page ML1021001582010-09-13013 September 2010 Issuance of Amendment No. 228, Modify Technical Specification Tables 2.2-1 and 3.3-1 to Clarify Notes and Actions ML1021504662010-09-13013 September 2010 Issuance of Amendment No. 227, Modify Technical Specification 3/4.9.7, Crane Travel - Fuel Handling Building to Permit Certain Operations Needed for Dry Cask Storage of Spent Nuclear Fuel W3F1-2010-0065, Response to Request for Additional Information Associated with Technical Specification Table 3.4-1 Isolation Valve Addition2010-08-12012 August 2010 Response to Request for Additional Information Associated with Technical Specification Table 3.4-1 Isolation Valve Addition W3F1-2010-0047, License Amendment Request for Proposed Change to Technical Specification 3.7.1.2, Emergency Feedwater System.2010-07-20020 July 2010 License Amendment Request for Proposed Change to Technical Specification 3.7.1.2, Emergency Feedwater System. 2CAN051001, Response to Request for Additional Information Associated with Core Operating Limits Report References2010-05-17017 May 2010 Response to Request for Additional Information Associated with Core Operating Limits Report References ML1011100352010-04-22022 April 2010 Correction to Technical Specification Page 3/4 3-10 Issued with Amendment No. 225 Technical Specification Change to Relocate Steam Generator Level - High Trip Function W3F1-2010-0011, License Amendment Request, Technical Specification Change Regarding Steam Generator Program2010-02-22022 February 2010 License Amendment Request, Technical Specification Change Regarding Steam Generator Program ML1005504632010-02-22022 February 2010 Request for Amendment to Technical Specification Table 3.4-1 Isolation Valve Addition W3F1-2009-0045, License Amendment Request to Modify Technical Specification Information for Table 2.2-1 and Table 3.3-12009-10-22022 October 2009 License Amendment Request to Modify Technical Specification Information for Table 2.2-1 and Table 3.3-1 W3F1-2009-0021, License Amendment Request to Revise the Departure from Nucleate Boiling Ratio (DNBR) Safety Limit2009-06-0303 June 2009 License Amendment Request to Revise the Departure from Nucleate Boiling Ratio (DNBR) Safety Limit W3F1-2008-0051, Entergy'S Response to Nrc'S Request for Additional Information Regarding License Amendment Request to Modify Requirements Regarding Control Room Envelope Habitability, Waterford Unit 32009-01-0808 January 2009 Entergy'S Response to Nrc'S Request for Additional Information Regarding License Amendment Request to Modify Requirements Regarding Control Room Envelope Habitability, Waterford Unit 3 ML0819904722008-07-30030 July 2008 License and Technical Specification Pages, Issuance of Amendment No. 216, Modify Diesel Generator Fuel Oil Testing Surveillance Requirements ML0812700362008-05-0909 May 2008 Tech Spec Page for Correction to Amendment 214 Request to Support Next Generation Fuel; Review & Approval of Revised ECCS Performance Analysis; & Review & Approval of Supplement to ECCS Performance Analysis ML0803800062008-04-16016 April 2008 License Page 4 and Technical Specification Page 5-5, Issuance of Amendment No. 215 Use of Optimized ZIRLO-TM Fuel Rod Cladding ML0808800152008-04-15015 April 2008 Tech Spec Pages for Amendment 214, Request to Support Next Generation Fuel; Review and Approval of ECCS Performance Analysis; and Review and Approval of Supplement to ECCS Performance Analysis ML0804401272008-02-12012 February 2008 2/12/2008 E-mail from Licensee Enclosing Markup of Technical Specification Page 5-5, Supplement to 4/24/2007 License Amendment Request Use of Optimized ZIRLO-TM Fuel Rod Cladding W3F1-2008-0001, License Amendment Request NPF-38-275, Containment Isolation Valves.2008-01-0202 January 2008 License Amendment Request NPF-38-275, Containment Isolation Valves. W3F1-2007-0033, License Amendment Request NPF-38-273 to Modify Requirements Regarding Control Room Envelope Habitability2007-08-16016 August 2007 License Amendment Request NPF-38-273 to Modify Requirements Regarding Control Room Envelope Habitability ML0711603482007-04-24024 April 2007 License Amendment Request to Allow the Use of Optimized Zirlo Fuel Rod Cladding ML0706803372007-03-19019 March 2007 Tech Spec Pages for Amendment 212 Reactor Coolant System Leakage Detection Instrumentation ML0703704312007-02-0606 February 2007 Technical Specifications, Issuance of Amendment No. 211 to Facility Operating License Removal of Vendor Recommended Diesel Generator Surveillance Requirement 2023-07-26
[Table view] |
Text
Entergy Nuclear South Entergy Operations, Inc.17265 River Road Killona, LA 70057-3093 Tel 504 739 6660 Fax 504 739 6678 jkowale@entergy.com Joseph A. Kowalewski Vice President, Operations Waterford 3 W3F1-2010-0019 February 22, 2010 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555-0001
Subject:
Technical Specification Table 3.4-1 Isolation Valve Addition Waterford Steam Electric Station, Unit 3 Docket No. 50-382 License No. NPF-38
Dear Sir or Madam:
Pursuant to 10 CFR 50.90, Entergy Operations, Inc. (Entergy) hereby requests the following amendment forWaterford Steam Electric Station Unit 3 (Waterford 3).The proposed amendment adds valve SI-4052A (RC LOOP 2 SDC SUCTION INSIDE CONTAINMENT BYPASS ISOL) and valve SI-4052B (RC LOOP 1 SDC SUCTION INSIDE CONTAINMENT BYPASS ISOL) to Technical Specification Table 3.4-1. The purpose of this line is to equalize the shutdown cooling system pressure down stream of valve SI-405A (RC LOOP 2 SDC SUCTION INSIDE CONTAINMENT ISOL) and valve SI-405B (RC LOOP 1 SDC SUCTION INSIDE CONTAINMENT ISOL).Attachment 1 provides an analysis of the proposed Technical Specification change.Attachment 2 provides a mark-up of the proposed changed page. Attachment 3 provides a clean copy of the proposed changed page.The proposed change has been evaluated in accordance with 10 CFR 50.91(a)(1) using the criteria in 10 CFR 50.92(c), and it has been determined that the changes involve no significant hazards consideration.
The bases for these determinations are included in the attached submittal.
The proposed change includes new commitments listed in Attachment
- 4. Entergy requests approval of the proposed amendment by February 22, 2011. Once W3F1-2010-0019 Page 2 approved, the amendment shall be implemented prior to Mode 4 following refuel 17.Although this request is neither exigent nor emergency, your prompt review is requested.
If you have any questions or require additional information, please contact Robert J.Murillo at 504-739-6715.
I declare under penalty of perjury that the foregoing is true and correct. Executed on February 22, 2010.Sincerely, JAKI JMIWJS Attachments:
- 1. Analysis of Proposed Technical Specification Change 2. Proposed Operating License Condition Change (mark-up)3. Proposed Operating License Condition Change (clean copy)4. List of Regulatory Commitments W3F1 -2010-0019 Page 3 cc: Mr. Elmo E. Collins, Jr.Regional Administrator U. S. Nuclear Regulatory Commission Region IV 612 E. Lamar Blvd., Suite 400 Arlington, TX 76011-4125 NRC Senior Resident Inspector Waterford Steam Electric Station Unit 3 P.O. Box 822 Killona, LA 70066-0751 U. S. Nuclear Regulatory Commission Attn: Mr. N. Kalyanam Mail Stop O-07D1 Washington, DC 20555-0001 Wise, Carter, Child & Caraway ATTN: J. Smith P.O. Box 651 Jackson, MS 39205 Winston & Strawn ATTN: N.S. Reynolds 1700 K Street, NW Washington, DC 20006-3817 Morgan, Lewis & Bockius LLP ATTN: T.C. Poindexter 1111 Pennsylvania Avenue, NW Washington, DC 20004 Attachment 1 W3F1-2010-0019 Analysis of Proposed Technical Specification Change Attachment 1 to W3F1-2010-0019 Page 1 of 9
1.0 DESCRIPTION
The proposed change adds valve SI-4052A (RC LOOP 2 SDC SUCTION INSIDE CONTAINMENT BYPASS ISOL) and valve SI-4052B (RC LOOP 1 SDC SUCTION INSIDE CONTAINMENT BYPASS ISOL) to Technical Specification Table 3.4-1 (Reactor Coolant System Pressure Isolation Valves). This change also adds a SI-4052A(B) leakage requirement of 0.375 gpm consistent with NUREG-1 432 Section 3.4.14 (RCS Pressure Isolation Valve (PIV) Leakage) guidance.SI-4052A(B) will be solenoid valves installed to bypass shutdown cooling isolation valve SI-405A (RC LOOP 2 SDC SUCTION INSIDE CONTAINMENT ISOL ) and SI-405B (RC LOOP 1 SDC SUCTION INSIDE CONTAINMENT ISOL), respectively.
The purpose of this line is to equalize the shutdown cooling system pressure down stream of valves SI-405A(B) in order to minimize the pressure transient in the system when valves S!-405A(B) are opened.Figure 1 shows the new valves and line configuration.
Figure 1 is specifically for the"A" train; the "B" train is a similar configuration.
Figure 1. Shutdown Cooling Suction Bypass Line SDC VACUtM " PRIMING CONNECTION 1" REL IEF_ _VE T --_SI1-404A S 1-401 A.1 8A REVISE Attachment 1 to W3F1-2010-0019 Page 2 of 9
2.0 PROPOSED CHANGE
The proposed Technical Specification change (mark-ups) which is submitted for NRC review and approval is provided in Attachment
- 2. Attachment 3 provides the clean copy of the proposed change.
3.0 BACKGROUND
The function of the Shutdown Cooling (SDC) System during normal and abnormal operation is to provide a means for removing decay heat from the reactor by providing flow to the reactor core through shutdown cooling heat exchangers.
Shutdown Cooling Suction Isolation Valves, SI-405A(B) and SI-4052A(B) are required for containment isolation and they are also the class boundary separating the SDC Class 1 line from the Class 2 low pressure safety injection (LPSI) pump suction piping. SI-405A(B) and SI-4052A(B) are required to be interlocked with pressurizer pressure to prevent over pressurization of the LPSI pump suction piping. The Open Permissive Interlock (OPI) prevents opening the valves until Reactor Coolant System (RCS) pressure is below 386 psia. Shutdown Cooling entry is not permitted until RCS pressure is less than 392 psia..4.0 TECHNICAL ANALYSIS The proposed change adds SI-4052A(B) to Technical Specification Table 3.4-1.*This change also adds a SI-4052A(B) leakage requirement of 0.375 gpm consistent with NUREG-1432 Section 3.4.14 (RCS Pressure Isolation Valve (PIV) Leakage)guidance to verify leakage from each RCS PIV is equivalent to-< 0.5 gpm per nominal inch of valve size up to a maximum of 5 gpm at a RCS pressure of 2 [2215]psia and '[2255] psia.Once this change is installed, valves SI-405A(B) and SI-4052A(B) become parallel inside containment isolation valves in the shutdown cooling system suction lines.SI-4052A(B) will also be listed as Containment Isolation Valves in UFSAR Table 6.2-32 and are designed to fail closed on. loss of power. These valves will be normally closed except during shutdown cooling operations or if the alignment of Low Temperature Overpressurization relief(s) are required.
Valves SI-401A(B) are upstream of SI-405A(B) and SI-4052A(B) and also will be.normally closed. Valves SI-407A(B) are the outside containment isolation valves, also normally closed. The configuration of SI-405A(B) and SI-4052A(B) includes interlocks such that these valves cannot be inadvertently opened with the RCS above the design pressure of the shutdown cooling system. Once SI-405A(B) is open, SI-4052A(B) may be independently closed from the control room. This change does not affect the capability of these valves to isolate the RCS from SDC. Therefore, there is no credible mechanism by which this change can introduce an inter-system LOCA (ISLOCA) as previously evaluated in the UFSAR. These features are discussed in FSAR section 7.6.1.1.2.
Attachment 1 to W3F1 -2010-0019 Page 3 of 9 The new line will create a bypass around valves SI-405A(B) to minimize the void formed during the plant operating cycle downstream of SI-405A(B) before SI-405A(B) is opened. The solenoid valves, SI-4052A(B), which will be installed in parallel with valves SI-405A(B) will be part of the class boundary separating class 1 and class 2 piping and are identified as a containment isolation valves.Mechanical and Civil SI-4052A(B).will be procured as a Safety Class 1 and Seismic Category 1 with a similar code edition as SI-405A(B).
The new bypass line will be procured and installed as Safety Related, ASME Section III, Class 1 up to and including solenoid valve SI-4052A(B).
Downstream of the solenoid valve the line is Class 2. Line 1S13/4-356 (357) will be 3/4" schedule 160 SA-376 piping and is rated for the design pressure of 2485 psig and temperature of 650 OF of the system. Line 2S13/4-358 (359) will be 3/4" schedule 80 SA-376 piping and is rated for the design pressure of 440 psig and temperature of 400 OF. The stainless steel material is suitable for use in this borated water system. This material is currently in use in this system.SI-405A(B) were constructed to the ASME B&PV Code,Section III, Subsection NB, 1971 Edition through winter 1972 Addenda with no Code Case applied. The code of record for the design of Class 1 piping is ASME B&PV Code,Section III, 1974 Edition, including addenda through Summer 1975. The applicable Code of record for the class 1 piping supports is ASME B&PV Code,Section III, Subsection NF, 1974 Edition through Summer Addenda 1975. Class 2 piping and piping supports code is ASME Section .11, 1971 through winter Addenda 1972.A code reconciliation will be performed for any components procured to a different code edition than described above. The seismic qualification of the new solenoid valves will meet the requirements of FSAR Section 3.9C and the new valves will be ,,added to FSAR Table 3.9-9 and 3.9C-1.Based on UFSAR 3.6A.1.2.5, "Typical cases for jet impingement loading on piping were analyzed.
The pipe supports/restraints are assumed to be functional under jet impingement load on pipe. Based on this assumption,,the essential piping under jet impingement load was found to meet stress criteria of ASME Section III". The pipe analysis methods used to analyze the new bypass line are equal to or more conservative than the methods used at the time of original plant design. The methods used previously were found to be sufficient to prevent overstress of pipe under jet impingement events per UFSAR 3.6A.1.2.5.
The pipe is fabricated and installed to appropriate plant specifications and procedures for ASME Class 1 or 2 pipe. Thus, the new by-pass line is adequate for jet impingement loads. In addition, the consequences of a jet impingement load on the new bypass line would be no different than the consequences of jet impacts on adjacent SI lines 1 S13-278(279), 1SI1-91A(91 B), and 1Sil1-32A(34B) due to the fact that these lines are all Attachment 1 to W3F1 -2010-0019 Page 4 of 9 in the same location; would be affected by the same jet; would impact the same target (if these lines were to become missiles);
and are of similar size and schedule.The new bypass line will require 2 supports at the new solenoid valves SI-4052A(B) at the vertical class 2 piping run.The addition of insulation on the bypass fill piping does notaffect the GSI-191 (Debris Generation Calculation) since the bypass fill line is located outside of the zone of influence for any GSI-191 postulated pipe breaks.Electrical
/ I & C The SI-4052A(B) solenoid valves and controls will be powered from the safety related A and B battery banks, respectively.
The batteries and power distribution panels were evaluated and determined to have acceptable margin available for this modification.
The control circuit length was also evaluated with respect to voltage drop and determined that sufficient voltage exists for proper operation-The SI-4052A(B) indicating lights will be powered from Static Uninterruptable Power Supplies (SUPS) 3A and 3B, respectively.
The SUPS and power distribution panels were evaluated and determined to have acceptable margin available for this modification.
Separating the control and position indication power, allows the 125 VDC controls power to be de-energized at the 125 VDC distribution panel to SI-4052A(B) valves whenever the RCS pressure is above 392 psia. SI-4052A(B) are failed closed valves so this will provide an additional means of protection against accidental or spurious operation.
Manual operation capability of SI-4052A(B) is provided in the Main Control Room (MCR) and Shutdown Control panel LCP-43. SI-4052A(B) operation are tied to the same Open Permissive Interlock (OPI) as SI-405A(B), which prevents opening the SDC valves until RCS pressure is below 386 psia. Regulatory Guide 1.75 requirements for separation of class 1 E components will be maintained for wiring changes.Circuit logic and physical design is established to ensure that Appendix R requirements are met. If a new solenoid valve were to spuriously open, the SI-401A(B) valve ensures high to low pressure boundary integrity.
This failure scenario is no different than the current configuration if SI-405A(B) spuriously opened.The solenoid valves will be procured to withstand the environmental and accident conditions inside containment as shown in FSAR Table 3.11-1. Seismic qualifications for the controls will meet IEEE-344-1975 requirements.
Containment Analysis The proposed change to containment net free volume by the addition of two bypass lines is within the documented margin to the minimum net free volume. The Attachment 1 to W3F1-2010-0019 Page 5 of 9 containment steel volume and surface area limits are met and the maximum allowable values are not challenged.
Based on no increase in the maximum containment pressure and temperature, containment integrity is not challenged by this modification.
The new bypass line is above the safety injection sump maximum level. Therefore, no safety injection sump parameters are challenged and the dose consequences for accidents which are mitigated using the safety injection sump (e.g., LOCA) are not increased.
5.0 REGULATORY
ANALYSIS 5.1 Applicable Regulatory Requirements/Criteria CRITERION 54 -PIPING SYSTEMS PENETRATING CONTAINMENT Piping systems penetrating primary reactor containment shall be provided with leak detection, isolation, and containment capabilities which reflect the importance to safety of isolating these piping systems. Such piping systems shall be designed with a capability to test periodically the operability of the isolation valves and associated apparatus to determine if valve leak-off is within acceptable limits.CRITERION 55 -REACTOR COOLANT PRESSURE BOUNDARY PENETRATION CONTAINMENT Each line that is part of the reactor coolant pressure boundary and that penetrates primary reactor containment shall be provided with containment isolation valves as follows, unless it can be demonstrated that the containment isolation provisions for a specific class of lines, such as instrument lines, are acceptable on some other defined basis: a) One locked closed isolation valve inside and one locked closed isolation valve outside containment or, b) One automatic isolation valve inside and one locked closed isolation valve outside containment or, c) One locked closed isolation valve inside and one automatic isolation valve outside containment.
A simple check valve may not be used as the automatic isolation valve outside containment or, d)'One automatic isolation valve inside and one automatic isolation valve outside containment.
A simple check valve may not be used as the automatic isolation valve outside containment.
Isolation valves outside containment shall be located as close to containment as practical and upon loss of actuating power, automatic isolation valves shall be designed to take the position that provides greater safety.The revised containment isolation configuration satisfies GDC 54 and 55 criteria, with the new solenoid valve SI-4052A(B) serving as the inboard containment Attachment 1 to W3F1 -2010-0019 Page 6 of 9 isolation valve in parallel with existing inboard containment isolation valve SI-405A(B). Existing valve SI-407A(B) is the outboard containment isolation valve.SI-4052A(B) will be included in Technical Requirements Table 3.6-2 (Containment Isolation Valves) similar to SI-405A(B) to demonstrate compliance with GDC 55(a).Manual valves SI-4053A(B) serve no containment isolation function.
This open manual valve is in series with solenoid valve SI-4052A(B) and functions only to maintain pressure boundary during plant operations.
The SI-4053A(B) valve will normally only be closed to facilitate testing when the plant is in an outage. Because this open manual valve is never required to perform a containment isolation function, no position indication is required.GDC 55 requirements are considered satisfied based on the following:
The GDC does not specifically prohibit the location of another valve in the piping Sbetween the containment wall and the valve designated as the Containment Isolation Valve (CIV). The only statement in GDC 55 regarding location of the CIVs is: "Isolation valves outside containment shall be located as close to the containment as practical...".
However, this statement is specifically directed at the outboard side only. There is no such statement in GDC 55 relevant to isolation valves on the inboard side of containment.
The GDC 55 statement does not specifically apply to the location of the SI-4053A(B) valves relative to the inboard SI-4052A(B)
CIVs since they are inside containment.
ANSI N271-1976 Figure B-3 shows a case where an additional valve exists between the designated inboard CIV and the containment wall.The manual valve SI-4053A(B) is being installed to accommodate testing provisions as specified in Section 5.3.2 of ANSI N271-1976.
This section states "The designer must then add to the fluid system -test and vent connections, test barriers such as additional valves, or other provisions necessary to establish a test volume to conduct the leakage rate tests." As such, the SI-4053A(B) valves are similar in function to the existing test valves SI-4051A(B) as they provide a test barrier, except during normal operation this test barrier valve is left open. In this configuration, the SI-4053A(B) valve is a passive component and functions the same as the piping to maintain a pressure boundary.Based on these considerations, (1) there is reasonable assurance that the health and safety of the public will not be endangered by operation in the proposed manner, (2) such activities will continue to be conducted in accordance with the site licensing basis, and (3) the approval of the proposed change will not be inimical to the common defense and security or the health and safety of the public.In conclusion, Waterford 3 has determined that the proposed change does not require any exemptions or relief from regulatory requirements and does not affect conformance with any GDC described in the Final Safety Analysis Report (FSAR).
Attachment 1 to W3F1 -2010-0019 Page 7 of 9 5.2 No Significant Hazards Consideration Waterford 3 has evaluated whether or not a significant hazards consideration is involved with the proposed amendment by focusing on the three standards set forth in 10 CFR 50.92, "Issuance of amendment," as discussed below: 1.1 Does the proposed change involve a significant increase in the probability or consequences of an accident previously evaluated?
Response:
No.The addition of the bypass fill line will decrease the likelihood of a pressure transient in the Shutdown Cooling System suction piping which increases the reliability of the Shutdown Cooling System. Once this change is installed valves SI-405A(B) and SI-4052A(B) become parallel inside containment isolation valves in the shutdown cooling system suction lines. The configuration of SI-405A(B) and SI-4052A(B) includes interlocks such that these valves cannot be inadvertently opened with the RCS above the design pressure of the shutdown cooling system. This change does not affect the capability of these valves to isolate the RCS from SDC. Therefore, there is no credible mechanism by which this change can introduce an inter-system LOCA (ISLOCA) different than previously evaluated in the UFSAR. These features are, discussed in FSAR section 7.6.1.1.2.
Therefore, this proposed changedoes not involve a significant increase in the probability or consequences of an accident previously evaluated.
- 2. Does the proposed change create the possibility of a new or different kind of accident from any accident previously evaluated?
Response:
No.Once this change is installed valves SI-405A(B) and SI-4052A(B) become parallel inside containment isolation valves in the shutdown cooling system suction lines. SI-4052A(B) and its associated lines and valves are designed to the same requirements as SI-405A(B) and its associated lines. The previously evaluated SI-405A(B) failure modes bound those failure modes possible by SI-4052A(B).
Thus, no failure of SI-4052A(B) exists that would be different or more severe than SI-405A(B), This proposed change does not create the possibility of a new or different kind of accident from any accident previously evaluated.
Attachment I to W3F1 -2010-0019 Page 8 of 9 3. Does the proposed change involve a significant reduction in a margin of safety?Response:
No.The proposed amendment adds SI-4052A(B) to Technical Specification Table 3.4-1. The change also adds an allowed leakage limit to SI-4052A(B) consistent with NUREG-1 432 guidance.Since the SI-4052A(B) leakage limit is commensurate with the valve size, this does not represent a significant reduction in a margin of safety.5.3 Environmental Considerations The proposed amendment does not involve (i) a significant hazards consideration, (ii) a significant change in the types or significant increase in the amounts of any effluent that may be released offsite, or (iii) a significant increase in individual or cumulative occupational radiation exposure.
Accordingly, the proposed amendment meets the eligibility criterion for categorical exclusion set forth in 1 OCFR51.22(c)(9).
Therefore, pursuant to 1 OCFR51.22(b), no environmental impact statement or environmental assessment need be prepared in connection with the proposed amendment.
6.0 PRECEDENCE
NUREG-1432 Section 3.4.14 (RCS Pressure Isolation Valve (PIV) Leakage)provides the leakage limit guidance applied to this application.
Attachment 1 to W3F1-2010-0019 Page 9 of 9
7.0 REFERENCES
7.1. Waterford
Steam Electric Station Unit No. 3, Updated Final Safety Analysis Report, Revision 303, June 2009: 7.2. Waterford Steam Electric Station Unit No. 3, Technical Specification.
7.3. NUREG-1432 Revision 3, Standard Technical Specification Combustion Engineering Plants, June 2004.
Attachment 2 W3F1-2010-0019 Proposed Technical.
Specification Change (mark-up)
Attachment 2 to W3F1-2010-0019 Page 1 of 1 SI-4052A S-C Suction Bypass Isolation SI-4052B SDC Suction Bypass Isolation~TABLE 3.4-1 REACTQR COOLANT SYSTEM PRESSURE ISOLATION VALVES SECTION A SI-329A SIT Check SI-329B " SI-330A SI-330B SI-336A Cold Leg Injection Check SI-3368 SI-335A " SI-335B SI-510A Hot Leg Injection Check SI-512A SI-510B SI-512B " SI-241 HPSI Check SI-242 SI-243 SI-244 SECTIONSB SI-142A LPSI Check SI-142B SI-143A SI-143B SECTION C POWER-OPERATED VALVES SI-401A SDC Suction Isolation SI-401O SI-405A SI-4058 " (a),. Maximum Allowable Leakage (each valve):
as noted below, leakage rates greater than 1.0 gpm are .. .... .e?'ccunac~ceptablea.
________ -L4\C"- I-401A(B) and SI-405A(B), For we op at~d'v ves POV% leakage rates greater aa ... .-gii. hut less tan or equal to 5.0 gpm are acceptable if the latest measured rate has not exceeded the rate determined by the.previous test by an amount that reduces the margin between previous measured leakage rate and the maximum permissible rate of 5. m.by 50% or greater. S o1-401A(B) and SI-405A(B'( ({j;For p wer oper te Val s... ly eakage rates great n -qe W1.O gpm u ess an or a o .gpm are unacceptable if the" -latest measured rate exceeded the rate determined by the previous test by an amount that reduces the margin between measured leakage rate and the maximum permissible rate of 5.0 gpm by 50% or greater.'§,Leakage rates greater than 5.0 gpm are unacceptable.(b) Toct'lfy ALARA requirements, leakage may be measured indirectly (as from ithe performance of pressure indicators) if accomplished in accordance with approved procedures and supported by computations showing that the method is capable of demonstrating valve compliance with the leakage criteria.) D (c) Minimum test differential pressure shall not be less than 200 psid.WATERFORD
-UNIT 3 3/4 4-20 1. SI-4052A(B) leakage limit is less than or equal to 0.375 gpm. -
Attachment 3 W3F172010-0019 Proposed Technical Specification Change (clean copy)
Attachment 3 to W3F1-201 0-0019 Page 1 of 1 TABLE 3.4-1 REACTOR COOLANT SYSTEM PRESSURE ISOLATION VALVES SECTION A SI-329A SIT Check, Sl-329B SI-330A SI-330B SI-336A Cold Leg Injection Check SI-336B SI-335A SI-335B Sl-510A Hot Leg Injection Check SI-512A" SI-510B SI-512B SI-241 HPSI Check SI-242" ~SI-243 .SI-244 SECTIONB.SI-142A. LPSI Check SI-i42B SI-1i43A SI- 43B SECTION C POWER-OPERATED VALVES S1401A SDC Suction Isolation SI-401B.SI-405A SI-405B SI-4052A SDC Suction Bypass Isolationi SI-4052B SDC Suction Bypass Isolation (a) Maximum Allowable Leakage (each valve): 1. SI-4052A(B) leakage limit isless than or equal to 0.375 gpm.2. Except as noted below, leakage rates greater than 1.0,gpm are unacceptable.
3.. For S17401A(B) and Sl-405A(B), leakage rates greater than 1.0 gpm but less than or equal to 5.0 gpm are acceptable if the latest measured rate has not exceeded the rate determined by the previous test by.an amount that reduces the margin between previous measured leakage rate and the maximum permissible rate of 5.0 gpm by 50%.or greater..4. For SI-401A(B) and SI-405A(B), leakagerates greater than .1.0 gpm but less than or equal to 5.0 gpm are unacceptable if the latest measured rate exceeded the rate determined by the previous test by an amount that reduces the margin between measured leakage rate and the maximum permissible rate of 5.0 gpm by 50% or greater.5.. Leakage rates greater than 5.0 gpm are. unacceptable.(b), to satisfy ALARA requirements, leakage maybe measured indirectly (as from the performance of pressure indicators) if accomplished in accordance With approved procedures:
and supported by.computations showing that the method is capable of demonstrating Valve compliance with .the leakage criteria.(c)- Minimum testdifferential pressure shall not be less than 200 psid.WATERFORD
-UNIT 3 3/4 4-20 AMENDMENT NO Attachment 4 W3F1-2010-0019 List of Regulatory Commitments Attachment 4 to W3F1-2010-0019 Page 1 of 1 List of Regulatory Commitments The following table identifies those actions committed to by Entergy in this document.
Any other statements in this submittal are provided for information purposes and are not considered to be regulatory commitments.
TYPE SCHEDULED COMPLETION DATE COMMITMENT (Check one)(If Required)ONE-TIME CONTINUING ACTION COMPLIANCE SI-4052A(B) will be procured as a X Prior to Refuel 17 Safety Class 1 and Seismic Category 1 return to Mode 4 with a similar code edition as SI-405A(B). The new bypass line will be procured and installed as Safety Related, ASME SectionlllI, Class 1 up to and including solenoid valve SI-4052A(B).A code reconciliation will be performed x Prior to Refuel 17 for any components procured to a return to Mode 4 different code edition than described above.SI-4052A(B) seismic qualification will x Prior to Refuel 17 meet the requirements of FSAR Section return to Mode 4 3.9C and the new valves will be added to FSAR Table 3.9-9 and 3.9C-1.SI-4052A(B) will be procured to X Prior to Refuel 17 withstand the environmental and return to Mode 4 accident conditions inside containment as shown in FSAR Table 3.11-1.SI-4052A(B) will be included in X Prior to Refuel 17 Technical Requirements Table 3.6-2 return to Mode 4 (Containment Isolation Valves) similar to SI-405A(B) to demonstrate compliance with GDC 55(a).Seismic qualifications for the controls X Prior to Refuel 17 will meet IEEE-344-1975 requirements.
return to Mode 4