Latest revision as of 10:53, 4 February 2020

Text

Rev 0 to, Inservice Insp Rept for Third Interval (1990-1991),First Period,First Outage (1990) at Re Ginna Nuclear Power Plant.
	ML17261B139
Person / Time
Site:	Ginna
Issue date:	07/13/1990
From:	; ROCHESTER GAS & ELECTRIC CORP.
To:	;
Shared Package
ML17261B138	List: ML17261B137; ML17261B139;
References
	NUDOCS 9008230232
	Download: ML17261B139 (236)
	v • d • e

ROCHESTER GAS AND ELECTRIC CORPORATION 89 EAST AVENUE, ROCHESTER, NEW YORK 14649 INSERVICE INSPECTION REPORT FOR THE THIRD INTERVAL (1990 1999)

FIRST PERIOD~ FIRST OUTAGE (1990)

AT R. E. GINNA NUCLEAR POWER STATION REVISION 0 JULY 13, 1990 9008230232 900817 Ii PDR ADOCK 05000244 Q PDC

A GINNA NUCLEAR POWER STATION Inservice Inspection Report 1990 1999 Interval, First Outage 1990 Table of Contents Introduction and Synopsis Summary of Work Accomplished Class 1 Components Class 2 Components Class 3 Components High Energy Components Design Break Weld Examinations Consequential Break Weld Examinations Component Support Examinations Steam Generator System Pressure Tests Hydrostatic Testing Leakage Testing Snubber Program Visual Examinations Functional Testing Repair/Replacement Program Repairs Service Induced Rejectable Indications Code Rejectable Indications Replacements Erosion/Corrosion Program Attachment I ISI Program Summary Attachment II Erosion/Corrosion (Minwall) Program Summary Attachment III Miscellaneous NDE Summary

l GINNA NUCLEAR POWER STATION Inservice Inspection Report 1990 1999 Interval, First Outage 1990 INTRODUCTION AND SYNOPSIS:

Inservice Inspection (ISI) activities during the 1990 Refueling Outage were performed on components of Class 1, 2, 3, High Energy Pipi'ng, Steam Generator Tubes and Snubbers. The examinations were initiated on 12 March 1990 and activities concluded on 7 May 1990. Examination methods included Visual Examination (VT), Liquid Penetrant Examination (PT), Magnetic Particle Examination (MT), Ultrasonic Examination (UT),

Radiographic Examination (RT), Eddy Current Examination (ET),

Functional Testing (FT) and System Hydrostatic Pressure and Leakage Tests.

Personnel involved included the RG&E Materials Engineering and Inspection Services Section., Southwest Research Institute, Gilbert Commonwealth, Allen Nuclear Associates, NDE Technologies, Ginna Station Quality Control and the Ginna Station Results/Test Group.

Additional Support Personnel involved, included individuals from the following departments: Ginna Station Insulators, Maintenance, Electricians, Pipe Fitters, Health Physics, Turbine Maintenance, RG&E's General Maintenance and the Mechanical Engineering Group of the Engineering Department.

~SMMARY OF ~WOR ACC M LISHED:

Note: A detailed summary of all components with associated results can be found in the Attachments.

I!

A total of 63 Class 1 components were examined during the 1990 Outage. The examination for these components consisted of 20 VT-1's, 11 VT-3's, 36 PT's, 3 MT's,,l RT, and 22 UT's. A total of 93 examinations were performed on Class 1 components.

Class 1 examinations were performed on the following components and/or system lines:

Pressurizer.

Steam Generators.

Regenerative Heat Exchanger.

10" Pressurizer Surge Line; 10-RC8-2501 2" Auxiliary Spray Line; 2-CH5-2501 10" Safety Injection Line; 10A-SI2-2501A

'h 6" Safety Injection (L.P. ) Line; 6A-RC-2501-B 4" Safety Injection (L.P.) Line; 4A-RC-2501-B 6" Safety Injection (L.P.) Line; 6A-RC-2501-A 2" Safety Injection Loop A Line; 2C-SI2-2501 2"

2" Safety Injection Loop B Line; 2B-SI2-2501 Letdown Line; 2B-RCO-2501-A 2" Letdown Line; 2A-RCO-2501-B 2" Letdown Line; 2A-CH4-2501 2" Charging Line; 2B-CH5-2501 2" Alternate Charging Line; 2A-CH5-2501 Reactor Coolant Pump B.

Reactor Coolant Pump Spare Flywheel.

Valves.

~SASS 2 CO PO ENTS' total of 75 Class 2 components were examined. The examination for these components consisted of 7 RT's, 19 UT's, 32 PT's, 14 MT's, 2 UTTK (Thickness Measurement), 10 VT-1's> and 35 VT-3's for a total of 119 examinations.

Class 2 examinations were performed on the following components and/or system lines:

Non-Regenerative Heat Exchanger.

Seal Water Heat Exchanger.

Reactor Coolant Filter.

Pulse Dampener Line;, 8A-CH-2502.

Seal Water Injection Filters.

Main Steam Loop A Line; 30A-MS-600-1A.

Main Steam Loop A Line; 6B-MS-600-1A.

Main Steam Loop B Line; 30B-MS-600-1B.

Feedwater Loop A Line; 14A-FW-900-1A.

Feedwater Loop B Line; 14B-FW-900-1B.

L.P. Safety Injection; Line 10-SI-151.

L.P. Safety Injection; Line SA-SI-301B.

LE P Safety Injection; Line SA-SI-151.

L.P. Safety Injection; Line 8B-SI-151.

L.P. Safety Injection; Line SD-SI-301.

LE PE Safety Injection; Line 6-AC-601.

L.P. Safety Injection;.Line 6A-AC-601.

L.P. Safety Injection; Line 4A-SI-301.

H.P. Safety Injection; Line 4D-SI-1501.

H.P. Safety Injection;. Line 4E-SI-1501.

H.P. Safety Injection; Line 3B-SI-1501.

H.P. Safety Injection; Line 3C-SI-1501.

H.P. Safety Injection; Line 3E-SI-1501 Safety Injection; Line 2A-SI-1501. '.P.

H.P. Safety Injection; Line 2D-SI-1501>>.

Residual Heat Removal; Line SFF-AC-601.

Residual Heat Removal; Line 6K-AC-151,

Residual Heat Removal; Line 10B-AC-601.

Residual Heat Removal; Line 10D-AC-601.

Residual'eat Removal; Line 10A-AC-601.

Residual Heat Removal; Line 10H-AC-601.

Residual Heat Removal; Line SC-AC-601.

Residual Heat Removal; Line 6C-AC-601.

Residual Heat Removal; Line SX-AC-601.

Containment Spray; Line 6C-SI-301.

Containment, Spray; Line 6E-SI-301.

A total of 21 Class 3 components were examined by the VT-3 visual technique, Class 3 component examinations were performed on the following system lines:

Component Coolant Pumps Discharge to Component Coolant Heat Exchanger Line: SB-AC5-152.

Service Water to Component Cooling and Spent Fuel Pit Heat Exchangers Line: 20A-SWO-125-9.

Service Water Intermediate Building to A 8c B Chillers Line:

6B-SW0-125-9.

Auxiliary Feedwater Pumps Discharge-Intermediate Building Line: 3A-FW7-900-1B.

Standby Auxiliary Feedwater from Penetration 119 to A S/G Feedwater Header.

Standby Auxiliary Feedwater From Penetration 119 to Auxiliary Feedwater Pump C Line: 3A-FW8-902-A.

Standby Auxiliary Feedwater from 'Penetration 123 to B S/G Feedwater Header.

Standby Auxiliary Feedwater Service Water Supply to Standby Auxiliary Feedwater Pump D Line: 4A-FW8-152-B.

Twenty Three (23) High Energy Piping components were examined during the 1990 Outage. The examinations for these components consisted of 16 VT-1's, 6 VT-3's, 6 PT's, 18 MT's, 11 UT's, 1 UTTK and 16 RT's for a total of 74 examinations.

High Energy component examinations were performed on the following system lines:

~Desi n Break Weld Examinations:

Main Steam Loop A Outside Containment, Line: 30A-MS-600-1A.

Main Steam Loop B Outside Containment, Line: 30B-MS-600-.1B.

Feedwater Loop A Outside Containment, Line: 14A-FW-900-1A.

Feedwater Loop B Outside Containment, Line: 14B-FW-900-1A.

sn Conse uential Break Weld Examinations:

Main Steam Loop A Outside Containment, Line: 30A-MS-600-1A.

Main Steam Loop B Outside Containment, Line: 30B-MS-600-1B.

Main Steam Turbine Building, Line: 24A-MS-600-1A.

Feedwater Turbine Building, Line: 20-FW-900-1.

Feedwater Turbine Building, Line: 8-FW-900-1.

Feedwater Loop A Outside Containment, Line:'4A-FW-900-1A.

Feedwater Loop B Outside Containment, Line: 14B-FW-900-1B.

Main Steam, Line: 36-MS-600-1.

Main Steam, Line: 24A-MS-600-1A.

Main Steam, Line: 24B-MS-600-1B.

Feedwater, Line: 14A-FW-900-1A.

Feedwater, Line: 14B-FW-900-1B.

STEAN GENERATOR ~BING:

Eddy Current Examinations were performed on tubes in the A and B Steam Generators.

The following Eddy Current examinations were performed during the 1990 Outage:

1 ~ Open Generator Tubes, Previously identified degradation greater than 20%.

2 ~ Open Generator Tubes, 20% Minimum, Rotating Random Sample Full Length (Total).

3 ~ Open Generator Tubes, 100% of all unsleeved tubes.

Hot Leg Tube End through First Tube Support Hot Leg.

4, Sleeved Generator Tubes, 20% Random Sample of each type.

Sleeve End to Sleeve End (minimum).

5. MRPC of Row 1 U-Bends and Row 2 U-Bends that are a part, of the 20% Random Sample Full Length.

The following information summarizes the initial pre-outage and post-outage tube status as well as the planned and completed Eddy Current work scope for Steam Generators A 8I B.

STEAM GENERATOR A:

Total Tubes 3260 Out of Service (plugged) 173 Sleeved Tubes 172 Open Unsleeved Tubes 2915

Req'd Number Number Min ~Pro m'd ~Ins t'd Com leted Hot, Leg to ¹1 TSP 2915 2915 2915 100.0%

Full Length (20X Random) 583 586 585 100.3X Previous Ind. > 20% 100 OX Sleeves 35 36. 35 100.0%

Total Tubes 3260 Out of Service (plugged) 197 Sleeved Tubes 223 Open Unsleeved Tubes 2840 Note: A total of 75 tubes were repaired.

( 51 sleeved R 24 plugged = 75 repairs)

STEAM GENERATOR B:

Total Tubes 3260 Out of Service (plugged) 340 Sleeved Tubes 642 Open Unsleeved Tubes 2278 Req'd Number Number X Min ~Pro m' ~In s t' Com leted Hot Leg to ¹1 TSP 2278 2278 2278 100.0X Full Length (20X Random) 456 461 460 100.9%

Previous Ind. > 20X 19 19 19 100.0X Sleeves 129 131 131 101.6X Deplugged Tubes (F/L) 28 28 28 100 OX

u~C

Steam Generator "B" Post-Outa e Tube Status:

Total Tubes 3260 Out of Service (plugged) 332 Sleeved Tubes 832 (~)

Open Unsleeved Tubes 2096 Notes: A total of 211 tubes were repaired.

(191 sleeved &, 20 (4) plugged = 211 repairs)

(4) = One previous post-outage B&W Sleeved Tube was plugged and is included in the'20 tubes identified in the above note.

Eddy Current Examination details are documented in the "Summary Examination Report for the 1990 Steam Generator Eddy Current Inspection".

SYSTEM PRESSURE ~EST:

H drostatic:

Four (4) Hydrostatic tests and associated VT-2 examinations were performed during the 1990. Outage.

Hydrostatic tests were performed on the following:

Procedure Discre tion RSSP-15.7.1 Charging System through Regenerative Heat Exchanger.

RSSP-13.16 CVCS Hold-up Tank "A".

RSSP-13.17 CVCS Hold-up Tank "B".

RSSP-13.18 CVCS Hold-up Tank "C".

Two Hydrostatic examinations were scheduled for the 1990 outage but were not performed. One'xamination was scheduled in error and was subsequently rescheduled for the correct outage, The second examination scheduled pertained to a non-class vessel and associated piping that was initially performed during the Second Interval ISI Program. The associated examination boundary is not under the jurisdiction of Appendix B of the Quality Assurance Manual and was removed from the Third Interval ISI Program.

Two Leakage Examinations'ere performed during the 1990 Outage and are listed below:

Reactor Coolant System Leakage Examination (PT-7)

Containment Spray Rings

Five (5) Leakage examinations were also performed to fulfill the Second Interval Program when Ginna Station was placed back in service in 1989. The Leakage examinations included the following.

CVCS Hold-Up Tanks &, Piping.

CVCS Charging R Letdown outside Containment.

CVCS Boric Acid Storage Tanks R Piping.

CVCS Boric Acid Evaporizer - Demineralizers ~

Diesel Generators.

~NBBER ~PR GRA Visual Examinations:

A total of 147 Snubber components were inspected that required 148 VT-3 examinations. These examinations were performed to satisfy Ginna Station Technical Specification requirements.

A Mechanical Snubber on the Feedwater Loop "B" System; FWU-54, was rejected during the close of the 1989 Outage. This component was reviewed by Engineering under NCR G89-743 and resulted in a "use-as-is" determination.

Snubber examinations were performed on the following components and/or system lines:

Steam Generator "A".

Steam Generator "B".

Turbine Driven Auxiliary Feedwater Pump Suction Line: 4A-SW-125-1.

Auxiliary Feedwater Pump Discharge Intermediate Building Lines: 3D-FW7-900-1 ~

3A-FW7-900-1A.

3J-FW7-900-1.

3A-FW7-900-1B.

3A-FW-900-1A.

Steam Generator 1B Blowdown Line: 2C-MS-600-1B.

Auxiliary Cooling Line: 3C-AC-152.

Auxiliary Cooling System from Pump Cooling Outlet to Penetration 126 Line: 3E-AC6-152 Cooling Line: 4B-AC-152. 'uxiliary 2-IN..Letdown Line: 2A-CH4-2501.

2-IN. Alternate Charging Lines: 2-CH-2501R.

2A-CH5-2501.

CVCS Letdown Line: 2G-CH-601.

Reactor Coolant Pump "B" Seal Water Line: 2AB-CH-2502.

Reactor Coolant. Pump "A" Seal Water Line: 2U-CH-151.

CVCS Letdown Line: 2H-CH-601.

CVCS Letdown Line: 2N-CH-151.

Feedwater Loop "A" Line: 14A-FW-900-1A.

Feedwater Loop "B" Line: 14B-FW-900-1B.

Main Steam Loop "A" Line: 30A-MS-600-1A.

Main Steam Loop "B" Line: 30B-MS-600-1'

'I fc

Main Steam Loop "B" Riser Line: 6B-MS-600-1B.

Main Steam Loop "A" Riser Line: 6B-MS-600-1A.

Main Steam Supply to Auxiliary Feedwater Pump Turbine Lines: 6B-MS-600-1.

6A-MS-600-1.

Low Head Safety Injection Line: 6-AC-601.

Residual Heat, Removal Line: 10A-AC7-2501-A.

Residual Heat Removal Line: 8B-AC-601.

. Residual Heat Removal Line: 10-AC-601.

Residual Heat Removal Line: 6D-AC-601.

Residual Heat Removal Line: 10E-AC-601.

Residual Heat Removal Line: 10G-AC-601.

Safety Injection Line: 10GG-AC-601.

Residual Heat Removal Line: 10D-AC-601.

Safety Injection Line: 6K-AC-151.

Safety Injection Line: 10-SI-151.

Safety Injection .Line: 4-SI-301.

Safety Injection Line: 8H-SI-151.

Safety Injection Lines: 10A-SI2-2501-B.

10A-SI2-2501-A.

Residual Heat Removal Line: 10A-AC7-2501-B.

Service Water to A8rB Diesel Generator Water Coolers Lines: 10B-SW0-125-9.

8G-SW0-125-9B.

Service Water Intermediate Building From 16" Header to Penetrations 312-320 Line: 8A-SW0-125-9.

Standby Auxiliary Feedwater from Penetration 123 to B S/G Feedwater Header Line: 3-FW-900-1B.

Standby Auxiliary Feedwater from Penetration 119 TO A S/G Feedwater Header Line: 3-FW-900-1A.

Pressurizer Relief from Pressurizer to Relief Manifold Lines: 6AP-RC-602.

6BP-RC-602.

Power Pressurizer Relief Lines: 3BP-RC-602.

3BP-RC-2501.

Functional ~Teatin A total of 15 Snubbers were Functionally Tested (FT) during the 1990 outage. Twelve of the Fifteen Supports were Mechanical Snubbers and the remaining three were Hydraulic Snubbers. One Snubber AFU-227 was originally scheduled for functional testing but was substituted by AFU-109 during the outage, Snubber Functional Testing (FT) was performed on the following components and/or system lines:

Steam Generator "A".

Auxiliary Feedwater Pump Discharge, Lines: 3A-FW7-900-1B 3A-FW-900-1A Reactor Coolant Pump 1B Seal Water, Line: 2AB-CH-2502.

Chemical 8c Volume Control System Letdown, Line: 2H-CH-601 Feedwater Loop "A", Line: 14A-FW-900-1A Feedwater Loop "B", Line: 14B-FW-900-1B Residual Heat Removal System, Line: 10G-AC-601 Safety Injection, Line: 10A-SI2-2501-B Pressurizer Relief from Pressurizer to Relief Manifold, Line: 6BP-RC-602 Power Pressurizer Relief, Line: 3BP-RC-602 REPAIR PROGRAM:

The Repair Program as described under the Ginna Station Quality Assurance Manual Appendix B identifies the component jurisdiction and associated requirements. The Rochester Gas &,

Electric Repair Program for Ginna Station covers both Servic'e Induced and Code Rejectable Repairs. A "Service Induced Reject" occurs when an item that is under Appendix B jurisdiction contains an indication that is beyond acceptable standards that was caused during its'nservice life. A "Code Reject" occurs when an item that is under Appendix B jurisdiction contains indications or other rejectable conditions that were not service induced. Code rejects include but are not 'limited to items such as arc strikes or tightening of loose bolting.

Three service induced rejectable components were identified during the 1990 Outage. The following listing provides a summary of the component and the associated exp'anded examination scope.

ASME Class: 1

~S etem: 2" Alternate Charging Line: 2A-CH5-2501 Com onent: Variable Spring, CVU-51 A 3/4" rod was bent from the vertical position. NCR 90-167 was generated and corrective action taken. The rod was replaced under Work Order ¹ (WO¹) 9021606. This support was reexamined and acceptable.

~Ex anded Examination ~Sco e:

The following components were examined on the system:

1. Support CVU-50, "U-Bolt" type: Examination revealed no other service induced recordable indications.

2. Support CVU-5, Variable Spring: Examination revealed no other service induced recordable indications.

II. ASME Class: 2

~S stem: Low Pressure Safety Injection Line: SB-SI-151 The Rod in the Spring Can is locked the space in front 85 of the can is 1/2" while the rod touches the rear of the can. NCR 90-091 was generated for Engineering disposition. Work Order (W04) 9021614 was initiated to correct the situation. The support, was reexamined'with no recordable indications and acceptable.

~Ex ended Examination ~gco e:

The following components were examined on the system:

1. Support RHU-101, Rigid Support: Examination revealed no other service induced recordable indications.

2. Support RHU-130, Variable Spring: Examination revealed no other service induced recordable indications.

1 III. ASME Class: 2

~S stem: High Pressure Safety Injection Line: 3E-SI-1501 Com onent: Rigid Support, SIU-58 Code Service Induced Re 'ectable Indication:

A loose nut was identified on top of the support while the associated bottom nut can be turned by hand. NCR 90-107 was generated for Engineering disposition. Work Order (W04) 9021810 was initiated to perform the repairs. The support was reexamined after repairs and acceptable,

~Ex ended Examination ~Sco e:

The following components were examined on the system:

1. Support SIU-57, Rigid Support: Examination revealed no other service induced recordable indications.

2. Support SIU-59, Rigid Support: The Examination revealed no other service induced recordable indications.

3. Support SIU-66> Rigid Restraint: Examination revealed no other service induced recordable indications.

fp Code The following .listing of 40 components provides an accounting of Code Respectable Indications identified during the 1990 Outage.

ASME Class: 1

~S stem: Low Pressure Safety lnjeotion System:

Line: 6A-RC-2501-B Slag inclusions located in the crotch area were identified in the Northeast and Southeast Lug Plates. NCR 90-163 was generated. An Engineering evaluation was performed that resulted in a use-as-is disposition.

2 ~ ASME Class: 1

~S stem: 2" Safety Znjeotion Loop A Line: 2C-SI2-2501 Code Re ectable Indication:

A rough weld with numerous pores on the weld center line was identified. NDE personnel "blended out" the indication with a file. The area was reexamined after blending and acceptable.

3 ~ ASME Class: 2

~S stem: Main Steam Loop A Line: 30A-MS-600-1A Com onent: Anchor in Penetration 401(outside containment),PS-A Code Re ectable Indication:

Lack of thread engagement was identified and reported on NCR 90-186. Engineering reviewed and performed an evaluation with a resulting disposition of use-as-is.

4 ~ ASME Class: 2

~S stem: Feedwater Loop A Line: 14A-FW-900-1A Coin onent: Variable Spring, FWU-1 The top nut does not have full thread engagement. NCR 90-173 was generated. Engineering review of this reportable condition indicated that that had a disposition of it was addressed under NCR G83-132 use-as-is, acceptable.

~ '

1i f'

<( >

lw

S. ASME Class: 2

~S stem: Low Pressure Safety Injection System Line: SA-SI-301B This Inspection identified loose Micarta block on the North side of the guide. NCR 90-160 was generated for Engineering review. A use-as-is disposition was based on the pipe to block gaps being within the requirements with the associated nuts tack welded in place as addressed by FCR-3092-145 dated 5-11-87.

6. ASME Class: 2

~S stem: Residual Heat Removal System Line: 10B-AC-601 The examination reported linear respectable indications in the weld. Additional augmented NDE investigation revealed that the indications were actually score marks that appeared to be mechanical in origin. The final disposition of this weld is acceptable.

ASME Class: 2

~S stem: Low Pressure Safety Injection System Line: 4A-SI-301 Code Re 'ectable Indication:

The Integral Welded attachment to the Elbow pressure boundary was 'not welded all around. NCR 90-164 was generated for Engineering review and evaluation. A disposition of use-as-is was made based upon the adequacy of the existing weld.

8. .ASME Class: 2 I

~S stem: High pressure Safety Injection System Line: 3E-SI-1501 L

Examination revealed that the ear on the pipe clamp is bent inward. NCR 90-247 was generated for Engineering review and evaluation. The replacement of the clamp was performed under WO¹ 9021837. Reexamination of the component was acceptable.

fr"j'f ASME Class: 2

~S stem: High Pressure Safety Injection System Line: 3E-SI-1501 Examination revealed that a bushing was located in the upper clamp section while none were located in the lower clamp. NCR 90-090 was generated for review and disposition.

Quality Control revealed that the bushing is a spacer and only required on one bolt. The component is acceptable, use-as-is.

ASME Class: 2

~S stem: Containment. Spray System Line: 6E-SI-301 Code Re 'ectable Indication:

The Integrally Welded attachment to the pressure boundary is missing 1.5" of weld in the crotch area, an arc strike is also situated adJacent to the weld. NCR 90-089 was generated for Engineering review and evaluation.

of use-as-is on the missing weld was based on Engineerings'isposition EWR 2512 design analysis, ME 39 Attachment Bl. The respectable arc strike was removed under WOg 9021570. Subsequent reexamination was acceptable.

ASME Class: High Energy Program Appendix B

~S stem: Feedwater Loop B Out.side Containment.

Line: 14B-FW-900-1B Code Re 'ectable Indication:

A rejectable Linear Indication 1/4" long was identified and reported on NCR 90-123. A disposition for repair employing a metal removal method was initiated under WOg 9021386.

Reexamination after the repair activity was acceptable.

ASME Class: High Energy Program Appendix B

~S stem: Feedwater Outside Containment Line: 14A-FW-900-1A Com onent: Mechanical Snubber, FWU-21 This support was rejected due to insulation obstructing the snubber movement. The insulation, was tight against the snubber, 6" away on the clamp side. NCR 90-200 was initiated to resolve the situation. Engineering dispositioned the NCR as rework and instructed that the clamp be moved and rotated to insure that the final clamp position will not restrict the snubber freedom of movement in the hot position. Reexamination of the support was acceptable. P

$t ASME Class: 3

~S stem: Service Water to Component Cooling A Spent Fuel Pit Heat Exchangers.

Line: 20A-SWO-125-9 Four(4) bo'its were identified and rejected for being 1/8" short of full thread enga'gement. NCR 90;090 was generated for Engineering review. Upon Engineerings'eview 85 evaluation, a use-as-is disposition was made due to the associated loads are in compression.

ASME Class: 3

~S stem: Auxiliary Feedwater Pump Discharge Intermediate Building.

Line: 3A-FW7-900-1B Code Re 'ectable Indication:

Inspection revealed that the support did not conform to the drawing requirements. NCR 90-108 was initiated and reported to Engineering for disposition. Engineering review indicated that Revision 1 of the drawing should have been used. The support is acceptable as is and agrees to Revision 1 drawing requirements.

ASME Class: 3

~S stem: Standby Auxiliary Feedwater from Penetration 119 to A Steam Generator Feedwater Header, Line: .3C-FW-900-1A Com onent: Variable Spring, AFW-30 The inspection revealed that the can setting of 580 lbs.

did not agree with the 540 lbs. identified in ME-256 Specification. NCR 90-185 was generated for Engineering review. The disposition initiated work to reset the spring can-to resolve the discrepancy. Reexamination i'ndicated no recordable indications, acceptable.

ASME .Class: 3

~S stem: Standby Auxiliary Feedwater from Penetration 123 to B Steam Generator Feedwater Header.

Line: 3C-FW-900-1B Code Re ectable Indication:

Results of the inspection revealed that the support cold setting of 2 1/8" should be 3 1/2". NCR 90-109 was generated.

A review of the data by Engineering indicated that the Gilbert Scales show the setting to be 2 1/2". The reading of 2 1/8" is acceptable. ME-256 Specification for this component will be corrected and revised.

(14)

j t

17. ASME Class: 3

~S stem: Standby Auxiliary Feedwater , Service Water supply to Standby Auxiliary Feedwater Pump D.

Line: 4A-FWS-152-B Oode Re 'ectable Indication:

Bottom lug weld on the East side has lack of sufficient weld at the toe. NCR 90-188 was generated to resolve this problem. Engineerings'isposition indicated that repairs are required. Upon completion of repair activities, a reexamination of the component was performed and acceptable.

This repair was performed on a component under the jurisdiction of "Construction". This component is not under the jurisdiction of Appendix B until "Construction" rework turnover.

18. ASME Class: Snubber Program Appendix B

~S stem: Auxiliary Feedwater Pumps Discharge, Xntermediate Building.

Line: 3A-FW-900-1A

\

Inspection revealed that the bolt holding the fluid reservoir was loose. NCR 90-104 was generated. Corrective action was performed by replacing the support with another Snubber under WO ¹9020415. Reexamination of the support was acceptable.

19. ASME Class: Snubber Program Appendix B

~S stem: Feedwater Loop A Line: 14A-FW-900-1A The top of the Snubber was hitting the mounting brackets.

NCR 90-246 was generated to document this condition.

Engineering performed an evaluation and dispositioned the condition use-as-is. The disposition of use-as-is was based on the angular tolerance and clearance on the snubber being adequate to perform its function.

20. ASME Class: Snubber Program Appendix B

~S stem: Feedwater Loop B Line: 14B-FW-900-1B Insulation on valve 4012 was resting on the snubber that may interfere with and cause binding of the snubber during operation. NCR 90-103 was generated to resolve this situation. Engineering disposition of reduceing the thickness of the insulation on the valve in order to provide the needed clearance was performed. Reexamination after repairs was acceptable.

(15)

21. ASME Class: Snubber Program Appendix B

~S stem: Feedwater Loop A Line: 14B-FW-900-1B The Inspection revealed that the locknut was not tight on the snubber side, the cotter pin was missing and a turnbuckle on the component was not shown on the drawing. NCR 90-172 was generated. Repairs were initiated to correct the reported items. The snubber was reexamined after repairs and found to be acceptable.

22. ASME Class: Snubber Program Appendix B

~S stem: Main Steam Loop A Line'. 30A-MS-600-1A The snubber was installed backwards to the way the drawing indicated. NCR 90-101 was generated for Engineering evaluation. The'esults of the evaluation indicated that the snubber may be rotated 180 degrees without changing its function. A disposition of use-as-is was made.

23 'SME Class: Snubber Program Appendix B

~Sstem: Safety Injection System Line: 10A-SI2-2501-A Code Re ectable Indication:

The inspection revealed that the snubber tang was binding on the pipe clamp. NCR 90-187 was initiated to address this problem. A repair was performed and the snubber was subsequently reexamined and found acceptable.

24. ASME Class: Snubber Program Appendix B

~S stern: Service Water to A ik B Diesel Generator Water Coolers.

Line: 10B-SWO-125-9 The examination indicated that loose nuts were found on the West side of the Snubber pipe clamp. NCR 90-208 was initiated for Engineering review 80 disposition. Repairs were initiated to tighten the loose nuts. Reexamination of the snubber indicated the component was acceptable.

il

~ (

g'r

- ASME

~S Class: Snubber Program Appendix B stem: Standby Auxiliary Peedwater from Penetration Steam Generator Feedwater Header.

Line: 3C-PW-900-1B 123 to B Inspection revealed that the 2 1/16" observed setting did not compare with the 3 1/2" documented cold setting in ME-256 Specification. NCR 90-109 was generated to resolve this problem. Engineering revealed that the Gilbert scales show the proper setting to be 2 1/2". Engineering disposition of use-as-is was made along with a proposed revision to ME-256 Specification.

26. ASME Class: Snubber Program Appendix B

~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: SAP-RC-602 Code Re 'ectable Indication:

The Snubber hits the base plate at the wall and is missing its I.D. Tag. NCR 90-184 was generated. Engineering evaluation indicated a use-as-is disposition. The base plate does not impair the snubber function. A new I.D. Tag was installed. The reexamination of the snubber was acceptable.

27 'SME Class: Snubber Program Appendix B

~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: 6AP-RC-602 The Inspection revealed that, the snubber was missing an I.D. Tag. NCR 90-184 was generated. A new I.D. Tag was installed. The reexamination was acceptable.

28. ASME Class: Snubber Program Appendix B

~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: 6BP-RC-602 The Inspection indicated that the snubber was missing an I.D. Tag. NCR 90-184 was generated. A new I.D. Tag was installed. The reexamination was acceptable.

ASME Class: Snubber Program Appendix B

~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: 6AP-RC-602 Com onent: Hydraulic Snubber, N607 The Inspection indicated that the snubber was missing an I.D. Tag. NCR 90-184 was generated. A new I.D. Tag was installed. The reexamination was acceptable.

(17)

F

~a f- ~

30. ASME Class: Snubber Program Appendix B

~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: 6AP-RC-602 The Snubber hits the base plate at the wall and is missing its I.D. Tag. NCR 90-184 was generated. Engineering evaluation indicated a use-as-is disposition. The base plate does not impair the snubber function. A new I.D. Tag was installed. The Reexamination of the snubber was acceptable.

31. ASME Class: Snubber Program Appendix B l ~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: 6BP-RC-602 The Inspection indicated that the snubber was missing an I.D. Tag. NCR 90-184 was generated. A new I.D. Tag was installed. The reexamination was acceptable.

32. ASME Class: Snubber Program Appendix B

~S stem: Pressurizer Relief from Pressurizer to Relief Manifold Line: 6AP-RC-602 The'nspection indicated that the snubber was missing an I.D. Tag and a cotter key was broken at top of the component near the wall. NCR 90-184 was generated. Engineering disposition indicated that the cotter key should be repaired and a new I.D. Tag installed. The reexamination was acceptable.

33 'SME Class: Snubber Program Appendix B

~S stem: Power Pressurizer Relief Line Line: 3BP-RC-2501 Inspection indicated that the cotter key at top of the component was not engaged 100X and was deformed. NCR 90-112 was generated. Engineering review indicated a repair should be made. The reexamination was acceptable.

34, ASME Class: Snubber Program Appendix B

~S stem: Power Pressurizer Relief Line Line: 3BP-RC-2501 Code Re 'ectable Indication:

The Inspection revealed that the snubber had a broken cotter key and the clamp end bolting had lack of thread engagement. NCR 90-112 was generated for Engineering review.

An Engineering design analysis was performed to address the lack of thread engagement. The dispositioned of use-as-is was made by Engineering. Work was initiated on the support wi'th the cotter key being replaced. Reexamination of the component was acceptable.

(18)

KI 0

35. ASME Class: 3

~S stem: Auxiliary. Feedwater System Line: 2A-FW-900-1 This 4" Crane Check Valve had cracks on the gasket surface and valve body. NCR 90-096- was generated for Engineering review. The disposition was made to remove the indications and perform a weld repair under WO ¹ 9021452.

Reexamination was performed and acceptable. The NDE reexamination record was documented under the Maintenance NDE Summary Number 900023.

36. ASME Class: 2

~S stem: Low Pressure Safety Injection Line Line: 10-SI-151 Two linear indications, 1/8" 86 1/2" was identified in the 2" Weld-0-Let to Pipe Weld. NCR 90-102 was generated.

Engineering reviewed this condition and recommended a repair be performed by metal removal process under WO¹ 9021568. A reexamination was performed of the repaired area and was acceptable.

37. ASME Class: 2

~S stem: Steam Generator Blowdown Line: 2E-MS-600-IA The wall thickness was 68K T Nominal that equates to a minimum reading of 0.150". In 1988 &, 1989 the thickness of this section was 0.170". NCR 90-150 was generated for Engineering review &. disposition. An interim use disposition was made to repair the area by grinding and rewelding. Work was performed under WO¹ 9021695. Replacement of this

.component is scheduled for the 1991 Outage under EWR 4324C or reinspected in 1991 if the EWR is deferred.

38. ASME Class: 2

~S stem: Steam Generator Blowdown Line: 2E-MS-600-1A The wall thickness was 64X T Nominal that equates to a minimum reading of 0.140". In 1988 the thickness of this section was 0 '80" and in 1989 the thickness'was 0.160". NCR 90-150 was generated for Engineering review &, disposition. An interim use disposition was made to repair the area by grinding and rewelding. Work was performed under WO¹ 9021695.

Replacement of this component is scheduled for the 1991 Outage under EWR 4324C or reinspected in 1991 if the EWR is deferred.

(

'I

~4i

+V" I 1"

39. ASME Class: 2

~S stem: Steam Generator Blowdown Line: SB-'MS-600-1A During a Maintenance activity to remove Valve 3411 internals, seat.

it was discovered that scoring occurred Steam cuts was also observed on the face of on the the valve bonnet. NCR 90-234 was generated to address the problem.

Repairs were performed under WO¹ 9000043. Upon completion of welding 86 subsequent machining operations, reexamination of the component was acceptable.

40. ASME Class: Class 3

~S stem: Service Cooling Water Line: 2B-SW-152 Inspection indicated that a 3/32" wide by 1/8" long through wall indication was identified in the 2" pipe by support SWU-570. The through wall indication was caused by work activities associated with EWR 2512. NCR G90-022 was generated for resolution. Engineering review indicated that a weld repair be performed. A Code weld repair and subsequent examinations were performed by Projects under SM 2512.129. The NDE consisted of surface examinations, UT thickness measurements and Hydrostatic testing. All repair cycle examinations and testing were acceptable.

Appendix B of the Ginna Station Quality Assurance Manual identifies the component jurisdiction and requirements for the Replacement Program. The term Replacement includes both Replacements and Modifications.

Replacements and/or Modifications that were initiated prior to 1 January 1990 and installed during the 1990 Outage are under the jurisdiction of the Second Interval Appendix B Program requirements. Any Replacements and/or Modifications that were initiated after 1 January 1990 are under the Third Interval Appendix B Program requirements. During the 1990 Outage, no Major Modifications were initiated and/or installed to the Third Interval Program requirements.

The following Replacements and Minor Modifications were performed during the 1990 Outage and conforms to the Third Interval Program requirements.

1. ASME Class: 3

~S stem: Chemical & Volume Control Line: 2C-CH6-151 (20)

t Re lacement ~Summer : The ITT Grinnell Valve Bonnet was an approved equilivant replacement. Code required reconciliation and verification was performed and is documented under TSR 90-

25. This bonnet was ordered under PO NEG-87329 and was installed under Work Order 4 9000185. A VT-2 Leakage examination was performed and acceptable.

2 ~ ASME Class: 3

~S stem: Auxiliary Eeedwater Line: 3A-FW-900-1A Re lacement ~Summer : The Crane Valve Disk assembly was a "like and kind" replacement. The Code required verification was performed. The Crane seating and disc assembly was ordered under PO NQ 10274CSD, serial number 159953102 and installed under Work Order g 9021448. A VT-2 Leakage examination was performed and acceptable.

EROSIO CORR SION ~NW~LL ~POGRAN:

A Total of 312 Components were examined during the 1990 Outage. The breakdoun of this total number is as follows: 154 components were of pipes, 108 components were of elbows, 28 components were of Tees'-, 19 components were of reducers and 3 components were nozzles.

Component Thickness measurements were performed .on the following systems:

A/B Feedwater Pump Discharge to 5 A/B Heater.

Feedwater Cleanup to Condenser East Wall.

Heaters 4 A/B to Feedwater Suction.

Condensate Pump &, Heater Drain Tank Discharge to Fee dwater Suction.

Low Pressure Downcomers. s Low Pressure Downcomers in West Condenser.

Low Pressure Downcomers in East Condenser.

MSR lA, 1B 2nd Pass Drain.

MSR 2A, 2B 2nd Pass Drain.

MSR lA, 1B 2nd Pass Drain to 5A H.P.H. & Condenser.

MSR 2A, 2B 2nd Pass Drain to 5B H.P.H. & Condenser.

MSR,1A 4th Pass to 5A Heater.

MSR 1B 4th Pass to 5B Heater.

MSR 1A &. 1B 4th Pass to Condenser.

MSR 2A 4th Pass to 5A Heater.

MSR 2B 4th Pass to 5B Heater.

MSR 2A & 2B 4th Pass to Condenser.

1A, 2A &. 3A L.P.H. Drains to Condenser.

Steam Extraction to Preseparator B & 4B L.P.H.

Steam Extraction to Preseparator A & 4A L.P.H.

Condensate Booster Pumps to Hydrogen Coolers.

MSR 1A & 1B to Heater Drain Tank.

MSR 2A & 2B to Heater Drain Tank.

5A H.P.H. Drain to 4A L.P.H.

5B H.P.H. Drain to 4B L.P.H.

Preseparator A/B to Heater Drain Tank 8c Condenser.

Preseparator A/B to Heater Drain Tank.

Turbine Driven Auxiliary Feedwater Pump to Discharge Lines.

Auxiliary Feedwater Pump A to Discharge Lines.

Auxiliary Feedwater Pump B to Discharge Lines.

Steam Extraction to 5A R 5B H.P.H.

Feedwater Discharge, Turbine Building.

Steam Generator Blowdown Lines, (Intermediate Building)

Steam Generator Blowdown Lines, (Turbine Building)

Steam Generator 1A Blowdoun Lines, (Containment Building)

Steam Generator 1B Blowdoun Lines, (Containment Building)

Feedw'ater Recirculation (CV-18).

Feedwater Recirculation (CV-19).

Main Feedwater Pump Bypass.

Steam Generator Blowdoun to Condenser.

Service Mater in Screen House.

Heater Drain Tank to Condenser, Main Steam Dump to Condenser.

Blowdown Tank to Condenser.

Blowdown Tank to 3A Low Pressure Heater.

Gland Steam Discharge to Gland Steam Condenser.

Preseparator Drain to Preseparator Vent.

4B Low Pressure Heater Vent.

Prepared By: 7-]3 PO Frank A. Klepacki ISI Engineer I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspections and employed by The Hartford Steam Boiler Inspection and Insurance Company have inspected and/or verified that the components described within this report and associated Attachments during the stated reporting time frame, and state to the best of my knowledge and belief, the Owner has performed examinations and corrective measures described in this Report.. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Reviewed By: 7 js 5"o ANII's Signature Date Approved By:

Michael J. Sa ori.to Supervisor, Materi.'als Engineering NDE Level III (22)

t' ef D,

GINNA NUCLEAR POWER STATION Inservice Inspection Report 1990 1999 Interval, First Outage 1990 Attachment I gU1~A4+

A. CLASS 1 COMPONENTS:

e Summary NDE Number Com onent Exam Results 004400 Surge Line Nozzle PT PT h. UT, no recordable to Reducer Weld; UT indications. Limitations SLNSEW due to ID Plate -acceptable.

005000 Safety Nozzle ¹1 PT PT 8r. UT, no recordable to Safe End; UT indications acceptable.

RC-273-I 005200 Safety Nozzle ¹2 PT PT & UT, no recordable to Safe End;- UT indications. Limitations, RC-273-S 1" downstream due to reducer acceptable.

005600 Manway Bolting, VT-1 VT-1 8c UT, no recordable 16 total. UT indications. MT required MT only when removed-bolting not removed. Acceptable.

2 Summary

~ ~gg &'l NDE h=~ a=a Exam Results 006000 Elbow to Safe End PT PT Ec UT, no recordable Inlet Nozzle Weld; UT indications, unable to skew PL-FW-I-ASW 45 degrees due to curved shoe acceptable.

006200 Outlet Nozzle Safe PT PT 8c UT, no recordable End to Elbow Weld; UT indications, unable to skew PL-FW-IX-ASW 45 degrees due to curved shoe.

No upstream exam due to nozzle

-acceptable.

006430 Inlet Manway Nuts; VT-1 VT-1, MT 8c UT, no recordable 16 Total. UT indications acceptable.

MT

C Summary NDE Exam Results 006435 Inlet Manway Studs; VT-1 VT-1, MT 8c UT, no recordable 16 Total. UT ,indications acceptable.

MT Summary NDE Exam Results 009200 Component Support VT-3 VT-3, no recordable indications Hanger; RHE-8-PR1 acceptable.

~tt 4 R '

ll 'B Summary NDE Exam Results 014000 Safe End to Pipe UT PT; no recordable indications.

Weld' PT UT; no recordable indications, UT,Geom: 2 indications upstream acceptable.

Pipe to Pipe Weld; PT; no recordable indications.

a.

014100 UT B PT UT; no recordable indications, UT, Geom: 2 indications, 1 upstream &. 1 downstream-acceptable..

014200 Pipe to Pipe Weld; UT PT; no recordable indications.

C PT UT; no recordable indications, UT, Geom: 2 indications, 1 upstream &, 1 downstream acceptable.

r w 014500 Pipe to Nozzle UT PT 8c UT; no recordable Weld; D .PT indications. UT Geom upstream acceptable.

5 2tt Summary NDE Exam Results 023000 Tee to Pipe Weld; PT PT; no recordable indications 9 acceptable.

Qi

,f I

Summary NDE Exam Results 025200 Pipe to Elbow Weld; PT PT; no recordable indications 20 acceptable.

026000 Pipe to Reducer PT PT; no recordable indications Weld; 27 RT (to verify removal of surface type Geom, indication.) RT; no recordable indications, Insig.,

intermittent IUC, suck-up, tungsten spot Bc spot pores acceptable.

~i~ 10 - I2- 5 Summary NDE Exam Results 034200 Elbow to Pipe UT PT 8c UT; no recordable Weld; GSW-2 PT indications. UT Geom:

upstream inside surface acceptable.

~L'e: 0 -S -2501-B Summary NDE Exam Results 034530 Hydraulic Snubber VT-3 VT-3; no recordable Support; SIU-3 indications, PSA-10 setting of 3 1/4" at a temperature of 57 deg. F. acceptable.

036100 Elbow to Nozzle UT PT; Insig: 1/4" long arc strike Weld; K PT -acceptable per Section XI table 3514-2. UT; no recordable indications acceptable.

7, 9" ~ow L>~~~@ Ryi~~

0 Summary NDE Exam Results

/

036400 Rigid Hanger, PT PT; Rej,, slag inclusions at Integral Attachment; NE & SE Lug plates in crotch RHU-22 area. NCR 90-163 generated, use-as-is per Engineering evaluation-acceptable.

,gS Summary NDE Exam Results 036500 Rigid Hanger VT-3; no recordable Support; RHU-22 indications acceptable.

8e 4" ~w ~8~4~~ ~Sa e ~stem:

Summary NDE Exam Results 036800 Elbow to Pipe UT PT 8r, UT; no recordable Weld; H PT indications acceptable.

9. $ " ~w ~~~ ~~ ~~tg

'ummary NDE Exam Results 037600 852A Valve to Pipe UT PT R UT; no recordable Weld; J PT indications. UT; Geom., Elbow side, root geometry acceptable.

10. !

&'ummary NDE Exam Results 039600 Pipe to Elbow PT PT, Rej.; Rough weld &, pores in Weld; ASW-1 center line of weld. Reexam.

after blending weld- no recordable indications per Sect. XI IWB-3514- 2,

-acceptable.

11 2" ROXeM l e.

LKULSall Summary NDE Exam Results 041600 Pipe to Elbow PT Insig ~ ; 1/16" Dia. round Weld; GSW-14 indication. Acceptable per Section XI IWB-3514-2.

c)>

l l.

Summary NDE Exam Results 042300 Nozzle 'to Pipe PT PT: no recordable indications Weld; 1 acceptable.

D w h='UUI Summary NDE Exam Results 043300 Pipe to Elbow PT PT: no recordable indications Weld; 6 acceptable.

Summary NDE Number Com onent Exam Results 046000 Rigid Restraint PT PT: no recordable indications Integral Attachment acceptable.

Support; CVU-31 046020 Rigid Restraint VT-3 VT-3: no recordable indications Support; CVU-31 acceptable.

al~akJ~

Summary - NDE Exam Results 051200 Elbow to Pipe PT PT: no recordable indications Weld'7 acceptable.

I" Alt Summary NDE Exam Results 052525 Anchor Integral PT PT: no recordable indications Attachment Support; acceptable.

CVU-24

C")

Summary NDE Exam Results 052530 Anchor Support: VT-3 VT-3; no recordable indications CVU-24 acceptable.

053300 383A Valve to Pipe UT PT Sc UT; no recordable Weld'8 PT indications acceptable.

053800 Pipe to Nozzle PT PT; no recordable indications Weld; 43 acceptable.

w Summary NDE Exam Results 054200 Variable Spring VT-3 VT-3; Rej. 3/4" rod bent. NCR Support; CVU-51 90-167 generated. Reexam.

after repairs, Setting of 61¹ at 65 deg. F.,Support SN: 582

-acceptable. Service Induced expanded scope required. See Summary ¹'s 054300 5, 054900.

054300 U-Bolt Support; VT-3 VT-3; no recordable indications CVU<<50 acceptable, no degradation of component identified with expanded service induced scope.

054300 Variable Spring VT-3 VT-3; no recordable indications Support; CVU-5 acceptable, no degradation of component identified with expanded service induced scope.

Setting of 135¹ at 63 deg. F.

Berger Patterson Size 3 support.

055100 393 Valve to Pipe UT PT & UT; no recordable Weld; 11 PT indications - acceptable.

lt I

l S P l

0

15. ~Rabat)~ ~Cl~at ~P

~u ~C~~ ~We ~ aw Summary NDE Exam Results 057410 Weld A VT-1 VT-1 8c PT; no recordable PT indications. VT-1, Insig; pits from casting process 360 deg.

around weld < 1/32". Grind marks from prepping-acceptable.

PT, Insig; 15 Random rounded indications < 1/16" Dia., small scale 1/8 x 1/4 and 4 gouges at weld attachments < 1/32" acceptable.

057420 Weld B VT-1 VT-1 &. PT; no recordable PT indications. VT-1, Insig; pits from casting process 360 deg.

around weld < 1/32". Grind marks from prepping-acceptable.

PT; Insig., casting rounded inclusions 1/8" Dia.;

Limitations due to pump supports B-1, B-2 &, B-3 over weld for 20" each acceptable.

057430 Weld C VT-1 VT-1 & PT; no recordable PT indications. VT-1 & PT; Insig.,

Gouge 1/2 x 1/32 deep by 1/16 wide at 11 1/2" location acceptable. Also, 1/2" Dia.

rounded indication above gouge with cluster porosity < 1/64" each -acceptable.

w Summary NDE h Exam Results 057910 Support 1 ,VT-1 VT-1 &, PT; no recordable PT indications. VT-1, Insig.;

minor pits < 1/32" in casting, grind marks from welds ground flush -acceptable. PT, Insig.;

2 indications each 3/8" long.

Indications are underbead cold laps at edge of weld and are not service induced acceptable.

4e

$g

Summary NDE Exam Results 057920 Support 2 VT-1 VT-1 8c PT; no recordable PT indications. VT;1, Insig.;

under cut < 1/32" long acceptable. PT, Insig.; Linear indication 7/16" long is undercut < 1/32" deep, Indication not service induced and acceptable per Section III NB4424(C).

057930 Support 3 VT-1 VT-1 8c PT; no recordable PT indications. VT-1, Insig.;

Weld is prepped showing grind marks < 1/32" deep acceptable.

16. Qeac~o ee Coa,'~Q ~ ~e: W Summary NDE Exam Results 058200 Flywheel, SN: UT UT; no recordable indications, 212-3D19156-G01-02 Top side keyway bore reflections were observed acceptable.

17. Va.'I vi~

~0 ~~q VVVv~e w Summary NDE Exam Results 058300 Darling Check VT-1 VT-1; no recordable indications Valve 842A acceptable.

10" ~Ce<+ V~alv Summary NDE Exam Results 058400 Darling Check VT-1 VT-1; no recordable indications Valve 842B acceptable.

4 Summary NDE Exam Results 059100 Velan Motor Oper. VT-1 VT-1; no recordable indications Gate Valve 701 bolts inspected in place acceptable.

~G ~V~v ~5)0 ~bs Summary NDE Exam Results 059200 Velan Motor Oper. UT PT & UT: no recordable Gate Valve; 720-1 PT indications acceptable.

Body Weld 059205 Velan Motor Oper. UT PT &, UT: no recordable Gate Valve; 720-2 PT indications acceptable.

Body Weld 059210 ,Velan Motor Oper. VT-3 VT-3; no recordable indications Gate Valve; 720 acceptable.

059300 Velan Motor Oper. VT-1 VT-1, MT &. UT: no recordable Gate Valve; 720 indications. Baseline exam performed in 1989. Nuts and Studs installed in 1990.

6" ~Ceca ~Vive Summary NDE Exam Results 059600 Velan Check Valve; VT-1 VT-1: no recordable indications, Bolts inspected in place acceptable.

Summary NDE Number Com onent Exam Results 059600 Velan Check Valve; VT-1 VT-1: no recordable indications, Bolts inspected in place acceptable.

V t

1t>

I g 'I

joe~ ~Vvea Summary NDE Exam Results 060000 Crosby Relief VT-1 VT-1: no recordable Valve; 434 indications on 8 1 1/4" Dia.

Bolts, 93 1"x8 nuts &, 48 1"x8x7" studs. Rej: 12 1" Dia.

Bolts. NCR 90-159 was generated for disposition.

Examination performed after installation; flange, bonnet studs & replacements acceptable.

060100 Crosby Relief VT-1 VT-1: no recordable Valve; 435 indications, 93 1"x8 nuts & 48 1"x8x7" studs. Insig: 1 of 1 1/4" Dia. bolts have minor corrosion; 7 bolts, NRI with 8 acceptable. Re): 12 1" Dia.

bolts with thread damage. NCR 90-159 was generated for disposition. Examination performed after installation; flange, bonnet studs &,

replacements -acceptable.

CoK~tQ; ~Eely Summary NDE Exam Results 060200 Copes-Vulcan VT-1 VT-1: no recordable Control Valve; indications acceptable.

430 3" ~ Zalea W H

Summary NDE Exam Results 060600 Velan Motor Oper. VT-1 VT-1; no recordable indications Gate Valve; 515 acceptable.

(l wh, I

~i~t+o. ~Va ve Summary NDE Exam Results 060200 Copes-Vulcan VT-1 VT-1: Rej: heavy corrosion Control Valve; on nuts, WO 9021545 was 200A generated to clean nuts for examination in accordance with A-1407 Procedure. No recordable indications &, no material degradation observed acceptable.

060900 Copes-Vulcan VT-1 VT-1: no recordable Control Valve; indications - acceptable.

200B 070000 Copes-Vulcan VT-1 VT-1: Rej: Boron deposits Control Valve; on top of gl &. g7 nuts and, 202 between nuts &, bolts. WO 9021545 was generated to clean deposit areas for examination in accordance with A-1407 Procedure. No recordable indications & no material degradation observed acceptable.

B. CLASS 2 COMPONENTS:

1. o

'La Summary NDE Exam Results 072240 7/8" Diameter UT VT-1: no recordable Bolts VT-1 indications. Insig: slight MT rust on all bolting. All studs were double nutted top &

bottom. One stud over V204A had 1 nut on bottom due to lack of space -acceptable. MT:

required when bolts are removed, bolting not removed.

UT: no recordable indications, 20 bolts were examined from top

& bottom -acceptable.

i<

l

%b

Summary NDE Exam Results 073170 Support Leg ¹3; VT-3 VT-3: no recordable S3 indications. Insig: paint on weld acceptable.

073400 Support Leg ¹3; PT PT: no recordable indications.

Integral Attachment Insig: Weld spatter on weld,

'eld, S3 nonrelevant indication acceptable.

3. Pg~~o ~o~ ~Flter:

~Wl~e Summary NDE Exam Results 073170 Support Leg ¹3; PT PT: no recordable indications Integral Attachment acceptable.

Weld, L3 074760 Support Leg ¹3; VT-3 VT-3: no recordable L3 indications acceptable.

I IL

-2 2 Summary NDE Exam Results 075800 Pipe to Elbow UT PT 83 UT; no recordable Weld; 2 PT indications acceptable.

5. ~Se

~We ~gc~cC IL Summary NDE Exam Results 078630 Support Leg ¹2; VT-3 VT-3; no recordable Welded Support, 2 indications. Insig; 4 pinholes 1/64", light undercut < 1/16" and peening marks acceptable.

i F')

,I

Summary NDE Exam Results 074760 Support Leg 42; PT PT: no recordable indications.

Integral Attachment Insig; 3 scattered pin holes Weld, 2 1/32" Dia. acceptable.

6. ~ St~@ ~oo Summary NDE Exam Results 080400 Anchor Support in VT-3 VT-3; Rej, Lack of thread Pen. 401 Outside MT engagement. NCR 90-186 was Containment; PS-A generated. Engineering disposition of use-as-is was made. MT; Insig, 3/4"xl"x1/2" circular indication with scabs from fabrication acceptable.

080450 Anchor Support in VT-3 VT-3; no recordable indication Pen. 401 Inside MT Insig; intermittent arc strikes Containment; PS-B 360 deg. < 1/32" -acceptable.

MT; no recordable indications, made. MT; Insig, 3/4"x1"xl/2" 080600 Pipe to Elbow RT VT-1, MT 8c RT; Examined as High Weld; D MT Energy Weld, see Summary No.

VT-1 200005 for 1990 results.

083200 6" Branch Conn. RT VT-1; no recordable indication Weld'3-BC-3 VT-1 Insig: various arc strikes, MT intermittent undercut &, light rust acceptable. MT; Insig, areas of arc strikes acceptable. RT; Other, weld configuration not conducive for RT examination.

083300 6" Branch Conn. RT VT-1; no recordable indication Weld; G3-BC-4 VT-1 Insig: various arc strikes, MT intermittent undercut acceptable. MT; no recordable indications in areas of arc strikes -acceptable. RT; Other, weld configuration not conducive for RT examination.

1" P tl cled~

y 8

Summary NDE Exam Results 083860 Bolting (< 2") VT-1 VT-1; no recordable G2-BC-2-B-BT MT indications on 12, 1"x7 1/4" UT studs acceptable. MT; MT not performed, only when studs are removed. UT; no recordable indications, scanned from top side only -acceptable.

S ILJIQS Summary NDE Exam Results 086800 Mechanical Snubber VT-3 VT-3; no recordable indications Support, MSU-15 SN 7476, North setting = 3" South 3 1/4" at a Temp. of 53 deg. F, -acceptable. Insig; snubber can not be rotated by hand -acceptable.

086805 Mechanical Snubber MT MT: Insig; intermittent EUC on Integral Attachment both North South snubber that 8r.

Weld, MSU-15 is < 1/32" 360 deg. around pipe side -acceptable.

087600 Guide Support; VT-3 VT-3: no recordable indications MSU-24 acceptable.

088100 Variable Spring VT-3 VT-3; no recordable indications Support; MSU-28 acceptable. Insig; rivet missing on ID Tag. Setting of 3 1/4 with load of 108524 at 47 deg. F., Berger patterson VS-1 support-acceptable.

Summary NDE Exam Results

'89300 6" Branch Conn. RT VT-1; no recordable indication Weld; L2-BC-1 VT-1 Insig: Light rust 360 deg. on MT weld, intermittent weld spatter Sc undercut < 1/32" deep acceptable. MT; no recordable indications -acceptable. RT; Other, weld configuration not conducive for RT examinations

l l 'A

Summary NDE Exam Results 093500 Variable Spring VT-3; Rej. Top nut, not in full Support; FWU-1 thread engagement. NCR 90-173 was generated for Engineering evaluation. Condition previous addressed on NCR G83-132, use-as-is -acceptable.

093505 Variable Spring MT MT; no recordable indications Integral Attachment accept'able.

Weld, FWU-1 094300 Elbow to Nozzle RT VT-1 &, MT; no recordable Weld; EE MT indications acceptable.

VT-1 RT; Insig, Various porosity, no apparent change since last examination on 4/7/89.

aw Summary NDE Exam Results 095400 Mechanical Snubber VT-3 VT-3; no recordable Support, FWU-47 Boot covering snubber indications'ubber is ripped. Acceptable for ISI examination, Trouble Card written for boot covering.

096800 Rigid Restraint VT-3 VT-3: no recordable indications Support; FWU-56 acceptable.

097200 Pipe to Elbow RT VT-1 &, MT; Weld prep for I-98 Weld'2 MT UT, no recordable indications.

VT-1 PT;(Aug. exam) no recordable UT indications. UTTK;(Aug. exam)

PT acceptable. UT; (I-98), no UTTK Recordable indications. UT; (I-98), Geom; ID configuration. UT performed in lieu of RT.

Summary NDE Exam Results 099900 Elbow to Nozzle RT VT-1 8c MT; no recordable Weld; BB MT indications acceptable.

VT-1 RT; Insig, Various porosity>

UT slag &, suck up. No apparent change since last examination on 3/27/89. UT; no downstream examination, indications were inclusions &, ID surface geometry acceptable.

9. ~ow +~si~ c~e~t I " ~

Summary NDE Exam Results 100310 2" Branch Weld; PT PT; no recordable indications 5M acceptable.

100325 Guide Support; VT-3 VT-3: no recordable indications SIU-109 acceptable. White powder residue from installation.

100925 Guide Support; VT-3: Insig, insulation residue SIU-108 resulting in light corrosion acceptable. Rej; Loose micarta block identified. NCR 90-160 was generated. Engineering evaluation provided use-as-is status.

I E I'

Summary NDE Exam Results 106050 Rigid Support; VT-3 VT-3: no recordable indications SIU-103 acceptable.

(

Summary NDE Exam Results 110300 Variable Spring VT-3 VT-3; no recordable indications Support; RHU-78 acceptable. Setting of 7/8" equates to a load of 644 4's at 61 deg. F..

e ~Stem:

iLJ Summary NDE Exam Results 110900 Pipe to Elbow PT PT 80 UT; no recordable Weld; 1A UT indications acceptable.

~ Resi~dg, ~a Qe@~v, ~S~t~n~

II raw'3

'LJR Summary NDE Exam Results 126400 Pipe to Tee PT PT 80 UT; no recordable Weld; 6 UT indications acceptable.

14. ~R~~~

P geea. Eeeoval, ~i~erg:

IJ Summary NDE Exam Results 129900 Tee to Pipe PT PT 80 UT; no recordable Weld; 1 UT indications - acceptable.

~+

I to

15. ~Resid a Heat ~Remove

~Sstem'-20 Summary NDE Exam Results 130300 Pipe to Pipe PT PT; Rej; initial exam indicated Weld; 1 UT linear indications. PT; reexam indicated that the linear marks were created by mechanical means, use-as-is by Materials Engineering - acceptable. UT; no recordable indications acceptable.

130550 2" Branch Weld; PT PT; no recordable indications 3A acceptable.

16. ~Raid al Heat ~emova ~Sst m:

Summary NDE Exam Results 133100 Elbow to PT PT 85 UT; no recordable 24 Flange'Weld; UT indications acceptable.

17. ~Res d al ~t removal ~Sstem:

ILRII Summary NDE Exam Results 133900 Rigid Restraint VT-3 VT-3: no recordable indications Support; RHU-28 acceptable.

133910 Rigid Restraint PT PT: no recordable indications Integral Attachment paint removed acceptable.

RHU-28 Summary NDE Exam Results 136000 Elbow to Tee PT PT &, UT; no recordable Weld; 17 UT indications acceptable.

-1 yl

18. iiesidu~ iiSS2 ~eoval ~St~m:

ILs Summary NDE Exam Results 140000 Rigid Hanger; VT-3 VT-3: no recordable indications RHU-383 acceptable,

19. ~Res'd a ~a gem<~vit. ~Ss~tnu C- C-60 raw' iLm Summary NDE Exam Results 144150 2" Branch Weld; PT PT; no recordable indications 19A Limitations; Hanger clamp 1/4" from toe of weld acceptable.

20. Lest~a ~Hea ~Re i~vs . ~Ss em'ummary NDE Exam Results 154250 Rigid Hanger VT-3 VT-3: no recordable indications Support; RHU-58 acceptable.

154255 Rigid Hanger PT PT: no recordable indications Integral Attachment paint removed acceptable.

RHU-58 154700 Elbow to Pipe FT PT &, UT; no recordable Weld; 1M UT indications acceptable.

21. ~es < iUt1 ~He t ~Remov ~Si~SL su Summary hfDE Exam Results 158500 Nozzle to Elbow PT PT L UT; no recordable Weld; 1 UT indications acceptable.

Pp

~Lin 10- D aw'ummary NDE Exam Results 159100 Rigid Support VT-3 VT-3:no recordable indications.

RHU-101 Insig. Spot of weld at 0" 8L 4" on 10" Elbow, weld deposit-no linear indications -acceptable.

No ID Tag. Additional Exam after NCR 90-091 for RHU-129 Service Induced Degradation.

No Service Induced Degradation found with expanded exam scope.

159105 Rigid Support VT-3 VT-3:no recordable indications.

Integral Attachment Insig, Spot of weld at 0" &, 4" Weld, RHU-101 on 10" Elbow, weld deposit-no linear indications -acceptable, No ID Tag. Additional Exam after NCR 90-091 for RHU-129 Service Induced Degradation, No Service Induced Degradation found with expanded exam scope.

159450 2" Branch Weld, PT PT: no recordable indications A4A acceptable,

23. ~o +~~re ~a~et I 8 hixn' Summary NDE Exam Results 159900 Variable Spring VT-3 VT-'3: Service Induced Reject; Support, RHU-129 Rod in spring can is l'ocked.

Space in front of can is 1/2",

Rod touches rear of can. NCR 90-091 was generated for Engineering disposition.

Repairs performed with reexamination acceptable -no recordable indications.

Setting of 6614 at a Temp. of 69 deg. F. for size 7 acceptable. See Summary No.'-s 159100 & 160400 for expanded scope results.

159901 Variable Spring PT PT: no recordable indications.

Integral Attachment acceptable.

Weld, RHU-129 1

Jg lg

24. ~Lw ~re sure ~Sa et Summary NDE Exam Results 160400 Variable Spring VT-3 VT-3: no recordable indications Support, RHU-130 -additional exam after NCR 90-091 for RHU-129 Service Induced Reject. No Service Induced Degradation found. Setting of 482¹ at 69 deg. F. -acceptable.

-S -3 Summary NDE Exam Results 160550 -

Rigid Support VT-3 VT-3: Reject-Support to elbow RHU-126 not welded all around. Missing 3" to 3 1/2" of weld on upper outmost radius. NCR 90-164 was generated. Engineering disposition and evaluation indicated that the existing weld is adequate and should be used as is acceptable.

Ih! t! e Summary NDE Exam Results 161350 Rigid Restraint VT-3 VT-3: no recordable indications Support, -SIU-73 Insig, grease fitting painted over, Restraint will not swivel back and forth -acceptable.

161390 Variable Spring VT-3 VT-3: no recordable indications Support, SIU-72 settings were taken at a "Temp. of 77 deg. F. of 5/8" equating to 250¹ -acceptable.

161391 Variable Spring PT PT: no recordable indications Integral Attachment paint removed from weld Weld, SIU-72 acceptable.

A$

Jgl F"'

~Li e: A-S 0 Summary NDE Exam Results 162090 Tee to 3/4" PT PT: no recordable indications Reducer Weld, 28 acceptable.

162210 Rigid Restraint VT-3 VT-3: no recordable indications Support, SIU-29 acceptable.

idee: -SI- 5 Summary NDE Exam Results 162740 Pipe to Elbow PT PT R UT; no recordable Weld'6 UT indications acceptable.

fe ~e Summary NDE Exam Results 163110 Pipe to Tee PT PT 8c UT; no recordable Weld; 10 UT indications acceptable.

ee p ee.f aJ e r wi Summary NDE exam Results 163590 Spring Can VT-3 VT-3: no recordable indications Support, SIU-68 setting of .7" or 5490 at a Temp, of 78 deg, F.-acceptable.

163591 Spring Can PT PT: no recordable indications Integral Attachment paint removed- acceptable.

Weld, SIU-68 I

Summary NDE Exam "

Results 163640 Rigid Restraint VT-3 VT-3: Reject. Ear on pipe clamp Support, SIU-66 is bent inward. NCR 90-247 was generated for Engineering review. Clamp was replaced, reexamined-acceptable.

Additional Exam performed after NCR 90-107 for SIU-58 that was a Service Induced Reject. No Service Induced Degradation was found with expanded scope acceptable.

163650 Guide Support VT-3 VT-3: no recordable indications SIU-65 acceptable.

163690 Rigid Support VT-3 VT-3: no recordable indications SIU-63 acceptable.

163710 Elbow to Pipe PT PT &, UT; no recordable Weld; 16 UT indications - acceptable.

UT, Insig; Geometry downstream acceptable.

163790 Rigid Restraint VT-3 VT-3: Reject. Identified Support, SIU-59 bushing in upper clamp section while no bushing was in the lower clamp. NCR 90-090 was

- generated. Bushing is actually a spacer Ec only required on one bolt per QC. Use-as-is, acceptable. No other recordable indications acceptable. Additional exam performed after NCR 90-107 for SIU-58 Service Induced Reject.

No Degradation found with expanded scope -acceptable.

163820 Rigid Support VT-3 VT-3: Service Induced Reject, SIU-58 Loose nut identified on top while the nut on the bottom tube can be turned by hand.

NCR 90-107 was generated for disposition. Nuts were tightened, Reexam after repairs acceptable. For Service Induced Code Reject,'xam.

scope was expanded. Exams were performed on Summary 0's 163830, 163790 8c 163640.

p Summary NDE Exam. Results 163830 Rigid Restraint VT-3: Additional exam after Support, SIU-57 NCR 90-107 for SIU-58 for Service Induced Reject. No Service Induced Degradation was found -acceptable.

31 ~ HiiHh ~rsyure ~~et Summary NDE Exam Results 164300 Flange to Pipe PT PT &, UT; no recordable Weld; 56 UT indications acceptable.

iLk4 Summary NDE Exam Results 164700 Pipe to Valve 878H PT PT; no recordable indications Weld'9 acceptable.

33 'a'S~a ~t~

Summary NDE Exam Results 166050 Reducer to Pipe PT PT &, UT; no recordable Weld; 2 UT indications acceptable.

UT, Root Geometry

%l 6 -S -30 Summary NDE Exam Results 166840 Rigid Support VT-3 VT-3 Rej., 1 1/2" of weld CSU-33 UTTK missing at crotch & arc strike PT adjacent to the weld. NCR 90-089 was generated. Arc strike was blended out. UT thickness readings obtained &, Acceptable.

PT &, VT-3 reexam after repairs

-acceptable'ngineering evaluation performed on missing weld with a use-as-is determination based on design analysis EWR 2512 &, ME 39 Attachment Bl.

166842 Rigid Support PT PT; no recordable indications Integral Attachment acceptable.

CSU-33 C. CLASS 3 COMPONENTS:

Summary NDE Exam Results 500200 Rigid Support VT-3 VT-3: no recordable indications Integral Attachment acceptable.

CCU-86 500205 Rigid Support VT-3 VT-3: no recordable indications CCU-86 Insig; no grout not required per ME121. Weep hole accepted, general practice when welding a confined component -acceptable.

~h

2. Service Water:

Summary NDE Exam Results 502080 Rigid Support VT-3 ,VT-3: no recordable indications Integral Attachment Insig. surface rust 8c light SWU-212 scale on weld acceptable.

500205 Rigid Support VT-3 VT-3: Rej. 4 nuts 1/8" short of SWU-212 full thread engagement. NCR 90-090 was generated for Engineering review. The disposition indicated that the load was in compression and that the condition was use-as-is. acceptable.

D aw'ummary NDE Exam Results 502130 Variable Spring VT-3 VT-3: no recordable indications Integral Attachment Insig. light rust on weld SWU-120 acceptable.

502135 Variable Spring VT-3 VT-3: no recordable indications Support, SWU-120 at a Temp. of 57 deg. F. the setting was 299¹'s -acceptable.

MRLIR5=

Summary NDE

/umber Com onent Exam Results 503620 Rigid Restraint VT-3 VT-3: no recordable indications Integral Attachment Insig. Light rust on lugs, SWU-384 welds R pipe acceptable.

503625 Rigid Restraint VT-3 VT-3: no recordable indications Support, SWU-384 pipe clamp insulated acceptable.

t d

Summary NDE Exam Results 505000 Guide/Rigid Support VT-3 VT-3: no recordable indications Integral Attachment with paint removed -acceptable.

AFU-08 505005 Guide/Rigid Support VT-3 VT-3: Rej. Guide does not AFU-08 conform to the component support drawing. Pipe was replaced by steel block with no attachment weld to the pipe.

NCR 90-108 was generated for Engineering review.

Disposition indicated that no nonconformance occurred due to review of the revised drawing, Revision 1 -acceptable.

Summary NDE Exam Results 505270 Variable Spring VT-3: no recordable indications Support, AFU-104 'Support is a size 9 with a setting of 870 0's taken at a Temp. of 272 deg. F.. Support ID4 is N-EG-13312-82-330 acceptable.

eedwater:

Summary NDE Exam Results 507000 Variable Spring VT-3: no recordable indications Support, AFW-14 Support is a Navco type E, Model BE-401 size 0 that had a setting of 604's at a Temp. of 66 deg. F..

507090 Guide Support, VT-3: no recordable indications AFU-221 Other; New tag for AFU-221 was (was AFW-22) attached to the support & a new baseline was performed and accepted.

Nt

/

0

Summary NDE Exam Results 507180 Variable Spring VT-3 VT-3: Rej. Can setting reading Support, AFW-30 of 580¹'s conflicted with the 540¹'s that the Specification allows. NCR 90-185 was generated for Engineering review. The support was reset, reexamined and acceptable.

Summary NDE Exam Results 507380 Guide, VT-3 VT-3: no recordable indications integral Attachment Other, New tag for AFU-165 was AFU-165 attached to the support. A new (was AFW-88) baseline was performed and accepted.

507385 Guide, VT-3 VT-3: no recordable indications AFU-165 Other, New tag for AFU-165 was (was AFW-88) attached to the support. A new baseline was performed and accepted.

Summary NDE Exam Results 508000 Variable Spring VT-3 VT-3: no recordable indications Support, AFW-3 acceptable. This support is a Navco Type D Size 3 that had a setting of 190¹'s at a Temp.

of 64 deg. F..

508090 Hydraulic Snubber VT-3 VT-3: Rej. Cold setting should Support, AFU-208 be 3 1/2" was 2 1/8". NCR 90-(was AFW-13) 109 was generated for Engineering review. Disposition indicated that the Gilbert Scales show a 2 1/2" reading.

Engineering to revise ME-256 and use-as-is the support to its existing, setting.

'T,

~ lp

Summary NDE Exam Results 508860 Guide Support VT-3 VT-3: Rej. Bottom weld on East Integral Attachment side has lack of weld at toe.

SWU-500 NCR 90-188 was generated for (was SW-88) Engineering review. Disposit,ion indicated that repairs will be made. Reexam after repairs indicated insignificant results being that small pinholes 1/16" were found 8L acceptable.

This support, has been upgraded to SWU-500 508863 Guide Support VT-3 VT-3: Guide was formerly SW-88 SWU-500 and has been upgraded to SWU-(was SW-88) 500 Examination indicated no

~

recordable indications acceptable.

D. HIGH ENERGY COMPONENTS:

1. ~Min Steam ~Loo g ~Out ide Containment:

Summary NDE Exam Results 200005 Pipe to Elbow VT-1 VT-1 8L RT: no recordable Weld, D RT indications. VT-1: Insig.Gouges MT from line-up lug ( 1/32" deep, acceptable. MT: Insig, surface scabs acceptable. RT: Insig.

Fine 8C spot porosity, all porosity acceptable per table A-5 NACSI 3/2/82.'00120 Elbow to Pipe VT-1 VT-1 MT 8L RT: no recordable Weld, E2 RT indications. VT-1: Insig.

HT Intermittent undercut up 8L down stream. An arc strike was also identified and prepped to 1/32" -all acceptable. RT:

Insig. Suck-up, fine porosity, slight weld concavity &, minor U/C -all acceptable, tg V

~ ~

1

2. ~Ma'team ~Lao B Outside C ntainment:

a ~ s Summary NDE Exam Results 200030 Pipe to Elbow VT-1 VT-1,MT &, UT: no recordable Weld, D RT indications. VT-1:Insig. Light MT rust on pipe weld-acceptable.

8L UT UT performed in lieu of RT.

200175 Elbow to Pipe VT-1 VT-1 & MT: no recordable Weld, E RT indications for weld prep.

MT PT: no recordable indications.

UT UTTK: initial and final PT thickness measurements for the UTTK weld prep -acceptable. UT: no recordable indications. UT:

Geom, Thickness change, root geometry, counterbore and ID acceptable.,

200180 Elbow to Pipe VT-1 VT-1: no recordable indications Weld, J RT VT-1, Insig, Minor pits < 1/32"

,light rust and grind marks from weld prep-acceptable. UT, PT &, MT: no recordable indications-acceptable. UTTK:

initial and final thickness measurements for weld prep acceptable. UT: Geom, rough root acceptable. UT performed in lieu of RT.

I k

~ice: 1 HE:

Summary NDE Exam Results 200070 Pipe to Pipe VT-1 VT-1,MT &, UT: no recordable Weld, AA RT indications. VT-1:Insig. Under MT cut < 1/32" deep-acceptable.

UT UT: Geom. ID counterbore configuration was confirmed by RT. Root Geometry acceptable.

UT performed in lieu of RT.

I I

~h 1

Summary NDE Exam Results 200410 Pipe to Pipe VT-1 VT-1, PT R UT: no recordable Weld, V2 RT indications. VT-1:Insig. One MT pit, undercut was removed when UT weld was ground flush PT acceptable. MT; Insig. All undercut was removed acceptable. UT; Geom. ID root configuration. UT performed in lieu of RT.

200425 Pipe to Valve VT-1 VT-1, MT &, UT: no recordable 3993 Weld, W RT indications. VT-1:Insig. Arc MT strike R undercut 1/16" deep UT acceptable. UT; Geom. No downstream exam due to valve acceptable. UT performed in lieu of RT.

2 " Wld m t:

Summary NDE Exam Results 200080 Elbow to Pipe VT-1 VT-1,MT R RT: no recordable Weld, F4 RT indications. RT:Insig. Stringer MT pass weld contains fine 8c spot porosity. No change since last inspected on 1-26-87 acceptable.

200090 Elbow to Pipe VT-1 VT-1,PT 5, UT: no recordable Weld, V RT indications. VT-1:Insig. 2 pits MT 1/16" deep, acceptable. MT: no UT recordable indications on weld PT prep for UT-acceptable. UT:

Geom. Root Sc counterbore identified. Ut performed in lieu of RT.

13

\+

2

Summary NDE Exam Results 200530 Pipe to Pipe VT-1 VT-1, MT, PT & UT: no Weld, H2 RT recordable indications MT acceptable. VT-1; Insig. Light UT rust & minor pits < 1/32" PT acceptable. UT; Geom. ID root geometry acceptable. UT performed in lieu of RT

'200545 Pipe to Pipe VT-1 MT: Rej. 1/4" linear indication Weld, J RT and arc strikes from MT fabrication. PT: Rej. Linear UT pin hole indications. NCR 90-PT 123 generated and repairs made.

VT-1, UT & PT: no recordable indications -acceptable. VT-1:

Insig. Light rust. UT thickness readings were performed and acceptable. UT; Geom., ID and root configuration -acceptable. UT performed in lieu of RT, IL't

~: i=2!

Summary NDE Exam 'Results 200235 Pipe to Elbow VT-1 VT-1,MT & RT: no recordable

, Weld, B RT indications. RT:Insig. Weld MT spatter and spot porosity identified acceptable. No apparent change since last examination on 3-17-82 acceptable.

Summary NDE Exam Results 200295 Pipe to Elbow VT-1 VT-1 & MT: no recordable Weld, B RT indications'T:Insig ~ Fine MT and spot porosity identified.

No apparent change since last inspection on 3-19-82.

L J

II C,

Summary NDE Exam Results 200340 Pipe to Elbow VT-1 VT-1, RT &, MT: no recordable Weld, D RT indications. RT:Insig. Minor MT suckup, excessive root bead 8c spot porosity acceptable.

VT-1: Insig, undercut ( 1/32" acceptable. No apparent change since last examination in 1982 acceptable.

IL '

Summary NDE Exam Results 201000 Anchor Support, VT-3 VT-3, PT 8c MT: no recordable MSU-35 MT indications on areas accessible PT to examination. VT-3; Insig.

Grout cracked acceptable.

Summary NDE Exam Results 201200 Hydraulic Snubber VT-3 VT-3; No recordable indications Support, S10 acceptable. VT-3; Insig. Light rust on pipe clamp -acceptable.

Snubber SN¹ is 487620. Fluid reading of 1 7/16 was taken when the Temp. was 72 deg.

F..-acceptable.

Summary NDE Exam Results 201400 Hydraulic Snubber VT-3; No recordable indications Support, S20 acceptable. The Snubber is a Grinnell Size 3 type having a SN¹ of 11946. The piston position of 2 3/4" was obtained when the temperature was 72 deg. F.-acceptable.

f

'4'>>

Z gine: 14A-FW-900-1A Kl=

Summary NDE Exam Results 201600 Mechanical VT-3 VT-3; Rej. Insulation tight Snubber Support, against snubber 6" away on the FWU-21 clamp side. NCR 90-200 was generated for corrective action. Repairs were performed and the support reexamined-acceptable. The Snubber SNg is F-51035-1 that had a setting of 3 5/32" at a Temp. of 75 deg.

F ~ ~

HS=

Summary NDE Exam Results 201840 Hydraulic Snubber VT-3 VT-3; No recordable indications Support, FWU-39 acceptable. VT-3; Insig. Light rust acceptable. The Snubber SNg is 61642 which is a type PSA-35 that had a setting of 3 3/8 at a Temp. of 64 deg. F.

-acceptable. h 201841 Hydraulic Snubber MT MT; No recordable indications Integral Attachment acceptable.

FWU-39 M.

Summary NDE Exam Results 202040 Rigid Support VT-3 VT-3; No recordable indications FWU-29 acceptable.

L'>

pl JI

E. STEAM GENERATOR TUBING:

Summary NDE Exam Results 800000 Open Generator ET ET; All previous indications Tubes having >20X were examined to the previous identified extent of degradation as a degradation >20X. minimum. See the 1990 Eddy Current Examination Report for details.

800150 20% Rotating ET ET; 20X Random sample of all Random Sample on open unsleeved tubes were open Generator examined full length. Tube R3-Tubes. C39 was programed but not examined full length. See the 1990 Eddy Current Examination Report for details.

800200 100K of all ET ET; 100X of all open unsleeved tubes were examined to the 41

'nTubes.open Unsleeved Tubes Generator Tube Support on the Hot Leg.

See the 1990 Eddy Current Examination Report for details.

800350 20X Rotating ET ET; 20X Random sample of each Random Sample on type of sleeved Generator Tube

, each type of Sleeve. were examined from sleeve end to sleeve end as a minimum.

Sleeved Tube R19-C22 was programed (excess of 20X) but not examined. See,the 1990 Eddy Current Examination Report

~

for details.

~

NDE R'ummary Exam Results 801000 Open Generator ET ET; All previous indications Tubes having >20% were examined to the previous identified extent of degradation as a degradation >20X. minimum. See the 1990 Eddy Current Examination Report for details.

~i

Ã

Summary NDE Exam Results 801150 20K Rotating ET ET; 20X Random sample of all Random Sample on open unsleeved tubes were open Generator examined full length. See the Tubes. 1990 Eddy'urrent Examination Report for details.

801200 100X of all ET ET; 100X of all open unsleeved Unsleeved Tubes tubes were examined to the g1 on open Generator Tube Support on the Hot Leg.

Tubes. See the 1990 Eddy Current Examination Report for details.

801350 20X Rotating ET ET; 20X Random sample of each Random Sample on type of sleeved Generator Tube each type of Sleeve. were examined from sleeve end to sleeve end as a minimum.

See the 1990 Eddy Current Examinatio'n Report for details.

P. SYSTEM PRESSURE TESTS:

~Casa: 2 Summary NDE Exam Results 350710 RSSP-15.7.1 VT-2 VT-2: no recordable indications Charging System or leakage acceptable./

through the Regenerative Heat Exchanger.

Summary NDE Exam Results 361600 RSSP-13.16 VT-2, VT-2: no recordable indications CVCS "A" Holdup -acceptable. Cannot examine Tank under tank due to support.

361700 RSSP-13.17 VT-2 VT-2: no recordable indications CVCS "B" Holdup -acceptable. Cannot examine Tank under tank due to support.

361800 RSSP-13.18 VT-2 VT-2: no recordable indications CVCS "D" Holdup -acceptable. Cannot examine Tank under tank due to support.

I fi

,n

g,'~asks' g ~a 3 Summary NDE Exam Results 411000 PT-7 VT-2 VT-2: no recordable indications Leakage of acceptable. Insig. Boron Reactor Coolant residue found and reported to System the Station by work requests for the following; valve 392A bonnet, valve 700 packing, FIP 180, valve 924 bonnet bolts &

valve 427 -acceptable.

415300 PT-30, Containment VT-2 VT-2: no recordable indications Spray Rings, open all nozzles appear to have flow flow path test. -acceptable.

400800 CVCS Holdup Tanks VT-2 VT-2: no recordable indications

&. Piping or leakage acceptable.

400805 CVCS Charging VT-2 VT-2: no recordable indications Letdown outside or leakage acceptable.

containment 400820 CVCS Boric Acid VT-2 VT-2: no recordable indications Storage Tanks 8c, or leakage acceptable.

Piping 400825 CVCS Boric Acid VT-2 VT-2: no recordable indications Evaporizer- or leakage - acceptable.

Demineralizers.

401100 Diesel Generators VT-2 VT-2: no recordable indications or leakage acceptable.

ly G. SNUBBER PROGRAM:

1. /team Generator A ~raw n'ummary NDE Exam Results 600080 SGA-7 VT-3 No recordable indications.

Hydraulic Snubber Insignificant: Serial numbers Serial Number: 78t8 are inverted with each 77-28073-A other. Fluid level 1" from top. Temperature 65 F.

Setting 2 7/16" Acceptable.

600090 SGA-8 VT-3 No recordable indications.

Hydraulic Snubber Insignificant: Hammer marks Serial Number: on the snubber block. Serial 77-28073-A numbers 78c8 are inverted with each other. Fluid level 1".

No tag on No. 8. Temperature 65 F. Setting: 2 1/2" Acceptable.

~~a~~g:

Summary NDE Exam Results 600120 SGB-3 VT-3 No recordable indications.

Hydraulic Snubber Insignificant: No ID stamp Serial Number: on snubber. Temperature: 65 F.

77-28073-A Setting: 2 7/8" Acceptable.

600130 SGB-4 VT-3 No recordable indications.

Hydraulic Snubber Insignificant: No ID tag.

Serial Number: Hammer marks on snubber block 77-28073-A Temperature 65 F. Setting 2 1/2" Acceptable.

IL Draw~ ~o C-16 Summary NDE Exam Results 600200 AFU-03 VT-3 No recordable indications.

Mechanical Snubber Temperature 84 F.

Serial Number: Setting: 2" 20925 Acceptable.

Model PSA-1 q I I',

4 ~ 'ar 2 " 2

~Dawi~ ~C- E Summary NDE Exam Results 600220 AFU-31 VT-3 No recordable indications.

Mechanical Snubber Temperature: 100 F.

Serial Number: Setting: 2" Acceptable.

24452 Model PSA-1 600240 AFU-34 VT-3 No recordable Mechanical Snubber 98 F.

indications'emperature:

Serial Number: Setting: 2 7/8".

16379 Acceptable.

Model PSA-1

~Dr win: ~C-Summary NDE Exam Results 600260 AFU-52 VT-3 No recordable ind'ications.

Mechanical Snubber Temperature: 100 F.

Serial Number: Setting: 1 3/4" ~

24453 Acceptable.

Model PSA-1

~aw~in : g-18 Summary NDE Exam Results 600280 AFU-75 VT-3 No recordable indications.

Mechanical Snubber Temperature: 102 F.

Serial Number: Setting: 2".

20924 Acceptable.

Model 'PSA-1 600300 AFU-98 VT-3 No recordable indications.

Mechanical Snubber Temperature: 302 F.

Serial Number: Setting: 1 1/2".

24454 Acceptable.

Model PSA-1 lp Eq. E

~Dawin: C-1C Summary NDE Number Com onent Exam Results'o 600320 AFU-101 VT-3 recordable indications, Mechanical Snubber Temperature: 302 F.

Serial Number: Setting: 3 1/4" 15751 Acceptable.

Model PSA-1 600339 AFU-103 (EAST) VT-3 No recordable indications.

Mechanical Snubber Temperature: 67 F.

Serial Number: Setting: 2 5/8" 18184 Acceptable.

Model PSA-3 600340 AFU-103 (WEST) VT-3 No recordable indications.

Mechanical Snubber Temperature: 67 F.

Serial Number: Setting: 3 1/8" 18185 Acceptable.

Model PSA-3

.I ~Drawin 'C-

'ummary NDE Number Com onent Exam Results 600360 AFU-109 VT-3 Rejected: Bolt holding Hydraulic Snubber reservoir loose. NCR 90-104 Serial Number: Replaced with a new snubber, 30986 SN 30986. Temperature: 76 F.

Size 1.5 Setting: 2 3/4" Acceptable.

600380 AFU-111 VT-3 No recordable indications.

Mechanical Snubber Temperature: 76 F.

Serial Number: Setting: 2 1/4" 16377 Acceptable.

Model PSA-1 600400 AFU-123 VT-3 No recordable indications.

Mechanical Snubber Temperature: 290 Serial Number: 1 5/8" F.'etting:

16378 Acceptable.

Model PSA-1 600420 AFU-124 No recordable indications.

Mechanical Snubber Temperature: 290 F.

Serial Number: 244 Setting: 2" Model PSA-1 Acceptable.

4 i$

'rl

~n~ C- B ~Daw~i: B-3 1 Summary NDE Exam Results 600460 BDU-16 VT-3 No recordable indications.

Mechanical Snubber Temperature: 68 F.

Serial Number: Setting: 2 1/2" 10182 Acceptable.

Model PSA-5 6.

~aw~ Q-29 Summary NDE Exam Results 600530 CCU-43 VT-3 No recordable indications.

Mechanical Snubber Temperature: 68 F.

Serial Number: Setting: 1 1/8" 11462 Acceptable.

Model PSA-1

~~w'~ C-34 Summary NDE Exam Results 600610 CCU-57 VT-3 No recordable indications.

Mechanical Snubber Temperature: 65 F.

Serial Number: Setting: 2 3/8" 04160305 Acceptable.

Model PSA-3 8.

~Dgwi~n: Q-30 Summary NDE

~Exa Results 600710 CCU-71 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 64 F.

Serial Number: Setting: 2 1/2" 18193 Acceptable.

Model PSA-3

~ s 9 ~ 2 ~ch ~Ltdown:

~Drawin ~A-2 Summary NDE Number Com onent Exam Results 600880 CVU-26 VT-3 No Recordable Indications Mechanical Snubber Temperature: 50 F.

Serial Number: Setting: 2" 20880 Acceptable.

Model PSA-1

10. J J"

~ige,'VC ~ Q('eLaJLa 2 ~El~em~ ~rawin: ~S-Summary NDE Number Com onent Exam Results 600900 CVU-46 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 50 F.

Serial Number: Setting: 2 23517 Acceptable.

Model PSA 1/4 j)raw~i:- ~27 Summary NDE

~umber -Exam Resu ts 600920 CVU-49 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 48 F.

Serial Number: Setting: 1 1/2" 9483 Acceptable.

Model PSA 1/2

~CV S Let~ow~

elJJIJal ~Draw': B-32 Summary NDE Number Exam Results 600940 CVU-80 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 50 F.

Serial Number: Setting: 1 1/2" 23516 Acceptable.

Model PSA 1/4 II IV

12. ~eact r ~Coo ant ~Pum 1B Seal Water:

Summary NDE Number Com onent Exam Results 600960 CVU-103 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 66 F.

Serial Number: Setting: 2" 24450 Acceptable.

Model PSA-1 600980 CVU-104 VT-3 No Recordable Indications, Mechanical Snubber Temperature: 62 F.

Serial Number: Setting: 2" 24449 Acceptable.

Model PSA-1 13 Summary

'eactor ~Coo a t ~um ~1 NDE

~Sea

~Draw ':

~Wat r:

B-34 Results Number Exam 601000 CVU-186 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 60 F.

Serial Number: Setting: 1 5/8" 16541 Acceptable.

Model PSA-1

14. ~CV S ~Le dow

~rw~ B-35 Summary NDE Number Com onent Exam Results 601040 CVU-345 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 69 F.

Serial Number: Setting: 1 1/2" 9491 Acceptable.

Model PSA 1/2 601060 CVU-351 VT No Recordable Indications.

Mechanical Snubber Temperature: 63 F.

Serial Number: Setting: 1" 12508 Acceptable.

Model PSA 1/2

~ '

~Dx awin B-36 Summary NDE Number Com onent Exam Results 601080 CVU-372 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 63 F.

Serial Number: Setting: 7/8" 12917 Acceptable.

Model PSA 1/2=

15

~Dawi~ ~2 NDE

'ummary Number Com onent Exam Results 601100 FWU-3 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 69 F.

Serial Number: Setting: 4 1/16" 2500-10-153 Acceptable.

Model Berger Paterson Size 10 601110 FWU-5 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 69 F.

Serial Number: Setting: 2 1/2" 2500-10-152 Acceptable.

Model Berger Paterson Size 10 16.

~Daw~ B-13 Summary NDE Number Exam Results 601120 FWU-8 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 58 F.

Serial Number: Setting: 3 1/8" 8033 Acceptable.

Model PSA-10 601130 FWU-12 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 58 F.

Serial Number: Setting: 3" 8034 Acceptable.

Model PSA-10 1'I 17

'~ice: 14 -FW-900-1A ~aw~i: ~B- 1

'ummary NDE Number Com onent Exam Results 601140 FWU-15 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 241 F.

Serial Number: Setting: 2 5/8" 9358/51644 Acceptable.

Model PSA-35 601150 FWU-17 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Corrosion on Serial Number: housing. Tube marks on 9392 transition tube and housing.

Model PSA-35 Acceptable. Temperature: 242 F.

Setting: 5" Acceptable.

601160 FWU-18 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 211 F.

Serial Number: Setting: 4 3/4" 7067 Acceptable.

Model PSA-35 graw~n: ~HE-Summary NDE Number Com onent Exam Results 601170 FWU-20 VT-3 Reject: Top of snubber was Mechanical Snubber hitting mounting bracket. NCR Serial Number: 90-246: Angular tolerance OK.

7049 Clearance adequate. Use-as-Model PSA-35 is per E.K. Voci Acceptable.3" Temperature:79 F.; Setting:

Acceptable.

601180 FWU-21 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 220 F.

Serial Number: Setting: 3 11/16" F51035 Acceptable.

Model HSSA-20 601190 FWU-23 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 250 F.

Serial Number: Setting: 2 3/4" 8630 Acceptable.

Model PSA-10 601200 FWU-24 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 280 F.

Serial Number: Setting: 3" 10061 Acceptable.

Model PSA-10

~42, s,g<

'L l

L,

,4

Summary NDE Number Com onent Exam Results 601209 FWU-26 (EAST) No Recordable Indications.

Mechanical Snubber Temperature: 156 F.

Serial Number: Setting: 3" 18179 Acceptable.

Model PSA-3 601210 FWU-26 (WEST) No Recordable Indications.

Mechanical Snubber Temperature: 195 F.

Serial Number: Setting: 3" 18180 Acceptable.

Model PSA-3

/raw'i~ QE-5 Summary NDE Number Com onent Exam Results 601220 FWU-32 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 222 F.

Serial Number: Setting: 3 1/4" 7053 Acceptable.

Model PSA-35

~rw~n: ~1 Summary NDE Number Com onent Exam Results 601230 FWU-38 No Recordable Indications.

Mechanical Snubber Temperature: 260 F.

Serial Number: Setting: 2 3/4" 9395 Acceptable.

Model PSA-35 601240 FWU-39 No Recordable Indications.

Mechanical Snubber Temperature: 177 F.

Serial Number: Setting: 3 7/8" 9354/51642 Acceptable.

Model PSA-35 601250 FWU-40 No Recordable Indications.

Mechanical Snubber Temperature: 267 F.

Serial Number: Setting: 3 1/2" 7066 Acceptable.

'odel PSA-35 li 18

~pe: 4-B-FW-900-1B l~rawi~ HE-8

'ummary NDE Number Exam Results 601260 VT-3 Reject: Insulation on Mechanical Snubber valve 4012 resting on snubber; Serial Number: binding. Re-exam after repair.

No Recordable Indications.

6158 Model PSA-35 Temperature: 73 F,

'WU-42 Setting: 4 3/8" Acceptable.

601270 FWU-44 VT-3 Rejec't: Insulation not removed.

Hydraulic Snubber 1) Locknut not tight on snubber Serial Number: side. 2) Snubber does not move.

643864-20 3) No oil indicator.

Model HSSA-30 4) Reservoir on bottom.

5) Cotter Pin missing.

6) Turnbuckle not on print NCR 90-172 generated. Re-exam after repairs. Temperature: 75 F., Setting: 3 3/4",Acceptable.

601280 FWU-47 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Boot on snubber Serial Number: has rip with tape on it.

7474 Trouble card written for boot.

Model PSA-35 Temperature: 47 F., Setting:

4.875" Acceptable.

601290 FWU-48 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Very light Serial Number: corrosion that was cleaned 7475 off. Hole in'oot on bottom.

Model PSA-35 Temperature: 66 F.

Setting: 4 1/4" Acceptable.

601300 FWU-51 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Very light Serial Number: corrosion after cleaning.

7483 Temperature: 61 F.

Model PSA-35 Setting: 4 1/2". Setting on chart 4 3/8" -Acceptable.

601310 FWU-52 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 182 F.

Serial Number: Setting: 1.875" 8607 Acceptable.

Model PSA-10 601320 FWU-54 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 187 F.

Serial Number: Setting: 3 1/2" 7482 Acceptable.

Model PSA-35

Summary NDE Number Com onent Exam Results 601330 FWU-57 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 187 F.

Serial Number: Setting: 2.875" 10064 Acceptable.

Model PSA-10

19. Maia Steam ~Loo ~A

~Draw ': B-8 Summary NDE Number Com onent Exam Results 601350 MSU-2 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 68 F.

Serial Number: Setting: 3 1/4" 7048 Acceptable.

Model PSA-35 601360 MSU-3 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 67 F.

Serial Number: Setting: 3" 7060 Acceptable.

Model PSA-35 20 'a'n ~Si~aa~ ~Loo B:

~aw~in '-8 Summary NDE Number Com onent Exam Results 601369 MSU-7 (TOP) VT-3 No Recordable Indications.

Mechanical Snubber Insi,gnificant: No damage is Serial Number: apparent to snubber or rear 7051 brackets. Total movement is Model PSA-35 significant -2". Drag force present. Temperature: 80 F.

Setting: 2 3/4". Acceptable to ME-256 per A. Butcavage.

601370 MSU-7 (BOTTOM) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: No damage to Serial Number: snubber. Present movement 2".

7047 Drag force present.

Model PSA-35 Temperature: 80 F., Setting:

3". Acceptable to ME-256 per A.

Butcavage.

Summary NDE Number Com onent Exam Results 601380 MSU-8 VT-3 No Recordable Indications.

Hydraulic Snubber Insignificant: Snubber does Serial Number: not, move by hand. Temperature:

G-20968-1-30 100 F., Setting 3 1/2",

Model HSSA-20 Acceptable.

3 -B- S-6 0-1B ~Draw '~n'B- 1 0 Summary NDE Number Com onent Exam Results 601390 MSU-12 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces.

Serial Number: Acceptable per NCR 90-119.

9400 Temperature: 190 F.

Model PSA-35 Setting: 3.375" -Acceptable.

601399 MSU-13 (EAST) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces.

Serial Number: Acceptable per NCR 90-119.

1467 Temperature: 200 F.

Model PSA-100 Setting: 3.25" Acceptable.

601400 MSU-13 (WEST) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces, Serial Number: Acceptable per NCR 90-119.

1464 Temperature: 200 F.

Model PSA-100 Setting: 3.25" Acceptable.

601409 MSU-15 (NORTH) VT-3 No Recordable Indications, Mechanical Snubber Insignificant: Light rust; Serial Number: Does not rotate-acceptable.

7476 Temperature: 48 F., Setting: 3" Model PSA-35 Acceptable.

601410 MSU-15 (SOUTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust.

Serial Number: Does not rotate, acceptable.

7477 Temperature: 48 F., Setting:

Model PSA-35 3 1/4"> -Acceptable.

601419 MSU-16 (NORTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces.

Serial Number: Acceptable per NCR 90-119.

7481 Temperature: 190 F., Setting:

Model PSA-35 3.875" Acceptable.

IP 4.

s 'I, 4i P

~Drawin: B-10 Summary NDE Number Com onent Exam Results 1

601420 MSU-16 (SOUTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces.

Serial Number: Acceptable per NCR 90-119.

7480 Temperature: 205 F. Setting:

Model PSA-35 4.375" Acceptable.

601429 MSU-18 (NORTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces.

Serial Number: Acceptable per NCR 90-119.

93695 1645 Temperature: 180 F.,

Model PSA-35 Setting: 3.625" Acceptable.

601430 MSU-18 (SOUTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Pigeon feces.

Serial Number: Acceptable per NCR 90-119.

937251646 Temperature: 160 F.

Model PSA-35 Setting: 3.375" -Acceptable.

601439 MSU-19 (NORTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust.

Serial Number: Does not rotate. Acceptable.

9369 Temperature: 325 F.

Model PSA'-35 Setting: 4.25" -Acceptable.

601440 MSU-19 (SOUTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust.

Serial Number: Does not rotate. Accept.

9372 Temperature: 235 F.

Model PSA-35 Setting: 4.25" -Acceptable.

601450 MSU-22 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust'.

Serial Number: Does not rotate. Accept.

9357 Temperature: 235 F.

Model PSA-35 Setting: 4.375" -Acceptable.

601460 MSU-25 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust.

Serial Number: Does not rotate. Accept.

1465 Temperature: "235 F.

Model PSA-100 Setting: 4.125" -Acceptable.

I Summary NDE Exam Results 601469 MSU-26 (TOP) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust.

Serial Number: Does not rotate. Accept.

1465 Temperature: 235 F., Setting:

Model PSA-100 4.125", Acceptable.

601470 MSU-26 (BOTTOM) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust on Serial Number: attachment plate to pipe.

9389 Temperature: 235 F., Setting:

Model PSA-35 1.5" ,

Acceptable.

601480 MSU-27 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust.

Serial Number: Does not rotate. Accept.

9398 Temperature: 235 F., Setting:

Model PSA-35 4.5", -Acceptable.

601490 MSU-29 VT-3 No Recordable Indications Mechanical Snubber Insignificant: Does not Serial Number: rotate. Accept. Temperature:

1469 416 F., Setting: 4 1/8" Model PSA-100 Acceptable.

601500 MSU-31 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 416 F.

Serial Number: Setting: 2 5/8" 9356 Acceptable.

Model PSA-35 601510 MSU-32 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 292 F.

Serial Number: Setting: 2 1/2" 1093 Acceptable.

Model PSA-100

/

J'

21 ~ ~Ma'n ~St.ea ~Lo A:

~ awi~n: B-9 Summary NDE Number Com onent Exam Results 601520 MSU-38 VT-3 Reject: Snubber installed Mechanical Snubber backward to print. NCR 90-101.

Serial Number: Snubber may be installed 180 1090 deg. without change of Model PSA-100 function. Use-as-is. per E.K.

Voci. Acceptable.

601530 MSU-39 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Does not Serial Number: rotate. Accept.

1087 Temperature: 76 F.

Model PSA-100 Setting: 4 3/4" -Acceptable.

601540 MSU-40 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Does not Serial Number: rotate. Accept.

1080 Temperature: 416 F.

Model PSA-100 Setting: 4 5/8" -Acceptable.

601550 MSU-44 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Does not Serial Number: rotate. No ID tag. Accept.

1468 Temperature: 416 F.

Model PSA-100 Setting: 3 1/8" -Acceptable.

22 'KQX $ <CKR a'

~ RL 9 XQQ4 3UB~eQ=

-ILJOJLJR ~'aw~ ~B- 0 Summary NDE Number Com onent Exam Results 601560 MSU-55 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 109 F.

Serial Number: Setting: 1 5/8" 18195 Acceptable.

Model PSA-3 601570 MSU-57 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: No tag-Accept.

Serial Number: Temperature: 138 F.

15388 Setting: 2 1/4" Model PSA-3 Acceptable.

1 II

23 Summary Number

'Ma'n Com n:

~Stea onent

~Loo A' Inch NDE Exam

~Rise s

~Dawin v

B-9 Results 601580 MSU-58 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 170 F.

Serial Number: Setting: 2 1/4" 18187 Acceptable.

Model PSA-3 601590 MSU-60 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Corrosion Serial 18186 Number: from pipeline above Temperature: 169 F.

it -Accept.

Model PSA-3 Setting: 3" Acceptable.

24

@raw~ C-32

'ummary NDE Number Com onent Exam Results 601600 MSU-72 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 140 F.

Serial Number: Setting: 2 1/2" 15767 Acceptable.

Model PSA-3 601610 MSU-74 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 335 F.

Serial Number: Setting: 3 1/4" 10083 Acceptable.

Model PSA-10 601620 MSU-75 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 334 F.

Serial Number: Setting: 1,7/8" 8030 Acceptable.

Model PSA-10

~Dw~in ~C-Summary NDE Number Com onent Exam Results 601630 MSU-78 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 220 F.

Serial Number: Setting: 3" 8576 Acceptable.

Model PSA-10

Summary NDE Number Com onent Exam Results 601640 MSU-80 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 220 F.

Serial Number: Setting: 2 1/8" 18181 Acceptable.

Model PSA-3 601650 MSU-82 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 220 F.

Serial Number: Setting: 2 3/4" 15768 Acceptable.

Model PSA-3 601659 MSU-84 (EAST) VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 72 F.

Serial Number: Setting: 3 1/8" 18182 Acceptable.

Model PSA-3 601660 MSU-84 (WEST) VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 72 F.

Serial Number: Setting: 2 5/8" 18183 Acceptable.

Model PSA-3 601670 MSU-85 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 284 F.

Serial Number: Setting: 3 3/8" 10074 Acceptable.

Model PSA-10

25. ~w ~e~s ~Sa et ct'o

~L'~ ~A~0 ~Daw~

Summary NDE Number Exam Results 601680 RHU-8 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 61 F.

Serial Number: Setting: 2 5/8" 15755 Acceptable.

Model PSA-3 II

'l+

l~

26. ~R sidual Heat Removal:

~i~ 10A-A 7-250 ~raw'n: ~15 Summary NDE Number Exam Results 601690 RHU-30 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 61 F.

Serial Number: Setting: 1" 7065 Acceptable.

Model PSA-35 601700 RHU-33 VT-3 No Recordable Mechanical Snubber 61 F.

Indications'emperature:

Serial Number: Setting: 3 1/8" 7064 Acceptable.

Model PSA-35

-* ~Dr win: B-23 Summary NDE Number Com onent Exam Results 601710 RHU-36 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 64 F.

Serial Number: Setting: 2 1/2" 15756 Acceptable.

Model PSA-3 Summary NDE Number Com onent Exam Results 601720 RHU-51 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 76 F, Serial Number: Setting: 2 1/2" 15752 Acceptable.

Model PSA-3 601730 RHU-53 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 74 F, Serial Number: Setting: 2 3/4",

15754 Acceptable.

Model PSA-3 p

~ice: 6D-AC-601 ~Draw'n: B-26 Summary NDE Number Com onent Exam Results 601740 RHU-61 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 79 F.

Serial Number: Setting: 2 3/8" 15753 Acceptable.

Model PSA-3 Summary NDE Number Com onent Exam Results 601749 RHU-63 (NORTH) VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 64 F.

Serial Number: -Setting: 2 3/4" 16380 Acceptable.

Model PSA-1 601750 RHU-63 (SOUTH) VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Mortar under Serial Number: mounting plate is cracked.

16375 Acceptable per NCR 90-118, Model PSA-1 A.G. Goetz. Temperature: 64 F.

Setting: 3" Acceptable.

~Draw' 'B-Summary NDE Number Com onent Exam Results 601760 RHU-69 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 65 F.

Serial Number: Setting: 2 1/4" 8629 Acceptable.

Model PSA-10 601769 RHU-71 (NORTH) VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 63 F.

Serial Number: Setting: 2 1/2" 11466 Acceptable.

Model PSA-1 601770 RHU-71 (SOUTH) VT-3 No Recordabl'e Indications.

Mechanical Snubber Temperature: 63 F.

Serial Number: Setting: 2 1/2" 11465 Acceptable.

Model PSA-1

~E 1

~

4 ~t

27

~Dw~in: Q-20 NDE

'ummary Number Com onent Exam Results 601780 RHU-72 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 63 F.

Serial Number: Setting: 3" 8606 Acceptable, Model PSA-10

28. Residual ~Hat geqjova~

~D~awi >~ Q-20 Summary NDE Number Com onent Exam Results 601790 RHU-75 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 63 F.

Serial Number: Setting: 3 1/2" 8632 Acceptable.

Model PSA-10

+raw in@: ~B-2 Summary NDE Number Com onent Exam Results 601800 RHU-92 VT-3 No Recordable Indications.

Mechanical Snubber Insignificant: Light rust Serial Number: on base plate. Accept.

16376- Temperature: 63 F.

Model PSA-1 Setting: 2 1/4" -Acceptable.

29

~Dew ln: ~B-1

'ummary NDE

~em be r Com onent Exam Results-601810 RHU-109 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 79 F.

Serial Number: Setting: 2 1/4" 11463 Acceptable.

Model PSA-1 I

~ )

1 t

Summary NDE Number Com onent, Exam Results 601820 RHU-110 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 74 F.

Serial Number: Setting: 2 1/4" 16373 Acceptable.

Model PSA-1 Line: ~S-30 ~Dr aw ': ~1~6 Summary NDE Number Com onent Exam Results 601830 RHU-119 VT-3 No 'Recordable Indications.

Mechanical Snubber Temperature: 140 F.

Serial Number: Setting: 1 5/8" 15766 Acceptable.

Model PSA-3

~Drawin: 1i-19 Summary NDE Number Com onent Exam Results 601840 RHU-123 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 89 F, Serial Number: Setting: 2 1/2" 15765 Acceptable.

Model PSA-3 Line: 10 2-250 ~Draw Summary NDE Number Com onent Exam Results 601850 SIU-3 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 57 F.

Serial Number: Setting: 3.250" 8614 Acceptable.

Model PSA-10

~L'ne: -S 2- 50 ~Dawin: ~6 Summary -NDE Number Com onent Exam Results 601860 SIU-47 VT Reject: Snubber tang binding Mechanical Snubber on pipe clamp. Repaired under Serial Number: NCR 90-187. No Recordable 15349 Indications, Acceptable.

Model PSA-3 Temperature: 72 F.

Setting: 3 3/8" -Acceptable.

r'g 0,

g I

30. Resi1Lnn,'Bat removal:

~D~wi~n: A-14 Summary NDE Exam Results 601870 SIU-52 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 69 F.

Serial Number: Setting: 2 9/16" 15348 Acceptable.

Model PSA-3 31 ~ e ': 1 6 1ll' ma w ~Dawin: C-13 Summary NDE Number Exam Results 601890 SWU-254 VT-3 Rejected: Loose nuts on west Mechanical Snubber side of snubber pipe clamp.

Serial Number: Repaired under NCR 90-208.

12508 Temperature: 42 F.

Model PSA 1/2 Setting: 1 1/8" -Acceptable.

~Drawin: C-14 Summary NDE Number Exam Results 601900 SWU-308 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 49 F.

Serial Number: Setting: 2 3/4".

8031 Acceptable.

Model PSA-10

~'la.

601910 SWU-309 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 49 F.

Serial Number: Setting: 3 1/4" 10073 Acceptable.

Model PSA-10 32 ' - ~ a-' e- w Penetrat'on ~31 -32

~DawiDR: ~C- 6B Summary NDE Number Exam Results 601920 SWU-370 VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 45 F, Serial Number: Setting: 2 1/4" 11464 Acceptable.

Model PSA-1 "J

7.

33

~D~w'~n: C-24

'ummary NDE Number Corn onent Exam Results 601930 AFU-205 (AFW-10) VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 81 F.

Serial Number: Setting: 3" 12900 Acceptable.

Model Grinnell Size 1 1/2 Fight AFU-208 (AFW-13) VT-3 Reject: Cold setting 2 1/16" 601940 Hydraulic Snubber should be 3 1/2". NCR 90-109 Serial Number: generated. Gilbert Scales show 21010 proper setting to be 2 1/2".

Model Grinnell Revise ME-256 Use-as-is per

~f 8r.

200 E.K. Voce Temperature: 66 F.

Setting: 2 1/16" -Acceptable.

34. IL M '

+raw~ C-20 Summary NDE Number Com onent Exam Results 601950 AFW-25 VT-3 Other: This snubber has been Hydraulic'nubber removed from the line under seismic upgrade program phase

10. Removed from Snubber program.

601960 AFW-26 VT-3 Other: This snubber has been Hydraulic Snubber removed from the line under seismic upgrade program phase

10. Removed from Snubber program.

601970 AFU-226 (AFW-27) VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 86 F.

Serial Number: Setting: 3 1/8" 12901 Acceptable.

Model Grinnell Size 1 1/2 601980 AFU-224 (AFW-28) VT-3 No Recordable Indications, Hydraulic Snubber Temperature: 86 F.

Serial Number: Setting: 2 1/2" 12905 Acceptable.

Model Grinnell Size 1 1/2

0 4

r

Summary NDE Number Com onent Exam Results 601990 AFU-225 (AFW-29) VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 85 F.

Serial Number: Setting: 1 3/4" 12906 Acceptable.

Model Grinnell Size 1 1/2 602000 AFU-227 (AFW-31) VT-3 No Recordable Indications.

Mechanical Snubber Temperature: 69 F.

'"'l Serial Number: Setting: 4 1/4" 25594 Acceptable.

Model PSA-3 35 'I'L

~Drawin S-2 Summary NDE Number Com onent Exam Results 602010 N601 VT-3 Reject: Snubber hits base Hydraulic Snubber plate at wall has no ID tag.

8D Serial Number: NCR 90-184 generated. Base 6565 plate does not impair function.

Model Grinnel Use-as-is per E.K. Voci. New Size 2 ID tag installed. Temperature:

66 F., Setting: 3" -Acceptable.

602020 N602 VT-3 Reject: No ID tag. NCR 90-184 Hydraulic Snubber generated, ID tag installed.

Serial Number: Temperature: 66 F.

6568 Setting: 2 1/4" Model Grinnell Acceptable.

Size 2 Summary NDE

~aw~ ~S-Number ,Exam Results 602030 N604 VT-3 Reject: No ID tag. NCR 90-184 Hydraulic Snubber generated. ID tag installed.

Serial Number: Temperature: 66 F.

6566 Setting: 1 1/2" Model Grinnell Acceptable.

Size 2 602040 N605 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 66 F.

Serial Number: Setting: 2 3/4" 6561 Acceptable.

Model Grinnell Size 2 ch g,l

Summary NDE Number Com onent Exam Results 602050 N607 VT-3 Reject: No ID tag. NCR 90-184 Hydraulic Snubber generated. ID tag installed.

Serial Number: Temperature: 66 F.

6562 Setting: 3 1/2" Model Grinnell Acceptable.

Size 2 602060 N608 VT-3 Reject: Snubber has no ID tag 5, Hydraulic Snubber hits base plate. NCR 90-184 Serial Number: generated. The Snubber hitting 6563 base plate does not impair its Model Grinnell function. Use-as-is per E.K.

Size 2 Voci. New ID tag installed.

Temperature: 66 F.

Setting: 3 3/4" -Acceptable.

/raw~ S-2 Summary NDE Number Com onent Exam Results 602070 N615 VT-3 Reject: No ID tag. NCR 90-184 Hydraulic Snubber generated. ID tag installed.

Serial Number: Temperature: 64 F.

6564 Setting: 2 3/8" Model Grinnell Acceptable.

Size 2 Qrawirri: S-2 Summary NDE Number Com onent Exam Results 602080 N616 VT-3 Reject: Cotter key broken off Hydraulic Snubber at top near wall, no ID tag.

Serial Number: NCR 90-184 generated. Key 6567 repaired R ID tag installed.

Model Grinnell Temperature: 65 F.

Size 2 Setting: 2 5/8" -Acceptable.

36 :2

'&'DE awi~

Exam'D

'ummary Number Results 602090 PS-2 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 63 F.

Serial Number: Setting: 4" PD872-39-1244 Acceptable.

Model Paul Monroe PMH2103

'h 45

Summary NDE Number Corn onent Exam Results 602100 PS-4 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 63 F.

Serial Number: Setting: 1" PD86144-1152 Acceptable.

Model Paul Monroe. PMH 2103

~Draw in: S-1 Summary NDE Number Com onent Exam Results 602110 PS-5 VT-3 Reject: Cotter key at top not Hydraulic Snubber engaged 100K 8c deformed. NCR Serial Number: 90-112'enerated for repairs.

PD87767-1246 Re-examined after repairs.

Model Temperature: 65 F.

Paul Monroe PMH 2103 Setting: 2 5/8" -Acc'eptable.

602120 PS-6 VT-3 Reject: Broken cotter key/lack Hydraulic Snubber of thread engagement at clamp Serial Number: end. NCR 90-112 generated.

PD87767-1239 Re-examined after repairs.

Model Insignificant: Lack of thread Paul Monroe -PMH 2103 engagement acceptable per design analysis by W. Tomo.

602130 . PS-8 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 65 F, .

Serial Number: Setting: 2 3/4" 86144-1159 Acceptable.

Model Paul Monroe PMH 2103 602140 PS-9 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 65 F.

Seri'al Number: Setting: 3" 86144-1154 Acceptable.

Model Paul Monroe PMH 2103 602150 PS-10 VT-3 No Recordable Indications.

Hydraulic Snubber Temperature: 66 F.

Serial Number: Setting: 3 5/8" 86144-1157 Acceptable.

Model Paul Monroe PMH 2103 T

~rawin: S-1A Summary NDE Number Com onent Exam Results 602160 PS-11 VT-3 No Recordable Indications.

Hydraulic. Snubber Temperature: 65 F.

Serial Number: Setting: 2 5/16" PD86144-1156 Acceptable.

Model Paul Monroe PMH 2103 H. SNUBBER PROGRAM FUNCTIONAL TESTING:

~Draw ': ~A-Summary NDE Number Com onent Exam Results 600081 SGA-7 FT Functionally tested and Hydraulic Snubber acceptable.

2 ~

~Dawin Summary NDE Number Exam Results 600341 AFU-103 (EAST) FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

18184 Model PSA-3 600342 AFU-103 (WEST) FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

18185 Model PSA-3

/raw~i'C-Summary NDE Number Com onent Exam Results 600361 AFU-109 FT Functionally tested S/N Hydraulic Snubber 15403. Installed new snubber Serial Number: S/N 30986 acceptable.

30986 Size 1.5

1 Summary NDE Exam Results 600381 AFU-111 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

16377 Model PSA-1

3. Reactor coolant ~P m 1B ~Sea Water:

~Dr w'n: B-33 Summary NDE Exam Results 600961 CVU-103 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

24450 Model PSA-1 Functionally tested

'00981 CVU-104 FT and Mechanical Snubber acceptable.

Serial Number:

24449 Model PSA-1

4. CWCS ~Ltdow

~Dr win: B-35 Summary NDE Number Com onent Exam Results 601041 CVU-345 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

9491 Model PSA 1/2

~D. awi~ gE-5 Summary NDE Exam Results 601171 FWU-20 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

7049 Model PSA-35 w"p

~L'ne: 14-B- W-900-19 ~Dewin: HB-8 Summary NDE Number Exam Results 601291 FWU-48 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

7475 Model PSA-35 601301 FWU-51 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

7483 Model PSA-35

7. Residual geea, ~eoval:

~awi~n B-20 Summary NDE Exam Results 601761 RHU-69 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

8679 Model PSA-10

@iLne: 0 -S 2-2 0 ~Daw:Lnn Summary NDE

'esults Exam 601861 'IU-47 FT Functionally tested and Mechanical Snubber acceptable, Serial Number:

15349 Model PSA-3 if '

ff4

9 ~ Service ~Wate to A & Q ~D'esel Generator Water Coolers:

~Drswin: 0-13 Summary NDE Number Com onent Exam Results

'601891 SWU-254 FT Functionally tested and Mechanical Snubber acceptable.

Serial Number:

12508 Model PSA 1/2 10 ~ l' s g Steam Generator Feedwater ~~e ~

I '" ~rawin '-20 Summary NDE Number Com onent Exam Results 602001 AFU-227 (AFW-31) FT Functional test not required Mechanical Snubber on this snubber in 1990.

Serial Number: Snubber AFU-109 was 25594 substituted per G. Wahl.

Model PSA-3 I' 'U '

~raw n:

u~

'S-2

~

Summary NDE Number Com onent Exam Results 602041 N605 FT Functionally tested and Hydraulic Snubber acceptable.

Serial Number:

6561 Model Grinnell, Size 2 12 ~Powe P e u

~R~eg,'DE Qg~w'~n: ~S-1

'ummary Number Com onent Exam Results 602161 PS-11 FT Functionally tested and Hydraulic Snubber acceptable.

Serial Number:

PD86144-1156 Model Paul Monroe PMH 2103 qi'

kg

/'

GINNA NUCLEAR POWER STATION Inservice Inspection Report 1990 1999 Interval, First Outage 1990 Attachment II Erosion/Corrosion (Minwall) Summary Report This section provides a detailed listing of components and associated examination results on items that were inspected during the 1990 Ginna Outage. A total of 312 components were examined.

Chart number 1 shows by graphic display the types of components that were examined. This chart also provides an overall display of

,components in relationship to the percentage of nominal wall remaining. Out of a total number of 312 components; 17 components had less than 65X nominal wall remaining.

Table number 1 provides a complete listing of items by components that were examined during the 1990 Ginna Outage. If the listed component had examination results in 1989, the results of that, examination is specified along with the results of the 1990 inspection. The percentage of Nominal Wall remaining by component is also included for reference.

1990 Minwall Examination Program and Results:

The following listing identifies the systems, the types of components within the system, the examination result breakdown as a percentage of nominal wall remaining as well as the reference drawing that identifies the component within the specified system.

Drawing System

~o. +ice M-1 A/B Feedwater Pump Discharge to 5 A/B Heater.

Results:

2 Pipes 1 >88X of nominal 1 88-82X of nominal M-4B Feedwater Cleanup to Condenser East Wall.

Results:

4 Elbows 1 >88X of nominal 2 Pipes 2 88-82X of nominal 2 Reducers 1 82-76X of nominal 4 76-70X of nominal Heaters 4 A/B to Feedwater Suction.

Results:

2 Elbows 3 >88X of nominal 2 Pipes 2 88-82X of nominal 1 Tee

~

'lMf p "1

Drawing System No. Title M-7B Condensate Pump h Heater Drain Tank Discharge to Feedwater Suction.

Results:

1 Elbow 6 >88X of nominal 3 Pipes 2 Tees M-10 Low Pressure Downcomers.

Results:

1 Pipe 1 76-70X of nominal M-10A Low Pressure Downcomers in West Condenser.

Results:

5 Elbows 6 >88X of nominal 17 Pipes 10 88-82X of nominal 2 82-76X of nominal 2 76-70X of nominal 2 <65X of nominal M-10B Low Pressure Downcomers in East Condenser.

Results:

7 Pipes 5 88-82% of nominal 1 82-76X of nominal 1 <65X of nominal M-11A .MSR lA, 1B 2nd Pass Drain.

Results:

2 Elbows 3 >88X of nominal 2 Pipes 1 88-82X of nominal M-11B MSR 2A, 2B 2nd Pass Drain.

Results:

1 Pipe 1 >88X of nominal 2 Tees 2 88-82X of nominal M-12A MSR 1A, 1B 2nd Pass Drain to 5A H.P.H. & Condenser.

Com onents Examined: Results:

2 Elbows 3 >88X of nominal 3 Pipes 1 88-82X of nominal 1 Tee 1 82-76X of nominal 1 76-70X of nominal M-12B MSR 2A,. 2B 2nd Pass Drain to 5B H.P.H. k, Condenser.

Results:

2 Elbows 4 >88X of nominal 3 Pipes 1 88-82X of nominal 2 Reducers 3 82-76X o'f nominal 1 Tee

A l

j1 0

+l

System

~T'ie MSR 1A 4th Pass to 5A Heater.

Results:

2 Elbows 1 >88X of nominal 1 88-82X of nominal MSR 1B 4th Pass to GB Heater.

Results:

2 Elbows 1 >88X of nominal 1 88-82%'of nominal MSR 1A & 1B 4th Pass to Condenser.

Results:

2 Elbows 2 88-82X of nominal MSR 2A 4th Pass to GA Heater.

Results:

1 Elbow 1 >88X of nominal MSR 2B 4th Pass to GB Heater.

Results:

2 Elbows 2 >88X of nominal 1 Pipe 1 88'-82X of nominal MSR 2A &. 2B 4th Pass to Condenser.

Results:

5 Elbows 8 >88X of nominal 5 Pipes 4 88-82X of nominal 2 Tees 1A, 2A & 3A L.P.H. Drains to Condenser.

Results:

2 Elbows 3 >88X of nominal 3 Reducers 1 88-82X of nominal 1 82-76X of nominal Steam Extraction to Preseparator B & 4B L.P.HE Results:

10 Elbows 11 >88X of nominal 9 Pipes 3 88-82X of nominal 1 Reducer 1 82-76X of nominal 1 Tee 4 76-70X of nominal 1 Downcomer (pipe) 1 70-65X of nominal 2 <65% of nominal

P fE J

Drawing System NcC, ~T'~e M-22 Steam Extraction to Preseparator A Sc 4A L.P.H.

Results:

5 Elbows 4 88-82X of nominal 4 Pipes 3 82-76X of nominal 1 Reducer 2 76-70X of nominal 1 Tee 3 <65X of nominal 1 Downcomer (pipe)

M-27 Condensate Booster Pumps to Hydrogen Coolers.

Results:

1 Elbow 1 >88% of nominal 1 Pipe 1 82-76X of nominal M-28 Condensate Booster Pumps to Hydrogen Coolers.

Results:

1 Elbow 1 >88X of nominal M-31 MSR 1A & 1B to Heater Drain Tank.

Results:

2 Elbows 2 >88X of nominal 1 Tee 1 88-82X of nominal M-32 MSR 2A 8r. 2B to Heater Drain Tank.

Results:

5 Elbows 9 >88X of nominal 3 Pipes 1 Reducer M-41A 5A H.P.H. Drain to 4A L.P.H.

1 Reducer 1 >88X of nominal M-41B GB H.P.H. Drain to 4B L.P.H.

1 Elbow 2 >88X of nominal 1 Pipe M-45 Preseparator A/B to Heater Drain Tank &, Condenser.

Results:

1 Pipe 1 76-70X of nominal M-46A Preseparator A/B to Heater Drain Tank 8r, Condenser.

Results:

1 Elbow 82-76X of nominal

e.

System Title Preseparator A/B to Heater Drain Tank.

Results:

1 Pipe 3 >88X of nominal 2 Reducers Turbine Driven Auxiliary Feedwater Pump to Discharge Lines.

Results:

5 Elbows 7 >88X of nominal 3 Pipes 2 88-82X of nominal 1 Tee Auxiliary Feedwater Pump A to Discharge Lines.

Results:

2 Elbows 3 >88X of nominal 1 Pipe Auxiliary Feedwater Pump B to Discharge Lines.

Results:

1 Pipe 1 >88X of nominal Steam Extraction to 5A Sc 5B H.PoH.

Results:

1 Elbow 5 >88X of nominal 4 Pipes 2 88-82X of nominal 2 Reducers 4 <65X of nominal 2 Tees 2 Nozzles Feedwater Discharge, Turbine Building.

Results:

1 Reducer 1 76-70X of nominal Steam Generator Blowdown Lines, (Intermediate Building)

Results:

7 Elbows 6 >88X of nominal 7 Pipes 2 88-82X of nominal 4 76-70X of nominal 1 70-65X of nominal 1 <65X of nominal Steam Generator Blowdown Lines, (Turbine Building)

Results:

4 Elbows 8 >88X of nominal 6 Pipes 2 88-82X of nominal 1 Lateral 1 <65X of nominal

dk wt II~

I I

I'I t

Drawing System goo. /itic M-89A Steam Generator 1A Blowdown Lines, (Containment Building)

Results:

6 Pipes 10 >88X of nominal 3 Tees 1 Nozzle, M-89B Steam Generator 1B Blowdown Lines, (Containment Building)

Results:

4 Pipes 3 >88X of nominal 1 Tee 2 88-82X of nominal M-89C Steam Generator 1B Blowdowm Lines (Containment Building)

Results:

1 Elbow 3 >88X of nominal 3 Pipes 2 88-82X of nominal 2 Tees 1 82-76X of nominal M-90 Feedwater Recirculation (CV-10).

Results:

1 Pipe 1 70-65X of nominal Feedwater Recirculation (CV-19),

Results:

1 Elbow 1 70-65X of nominal M-92 Main Feedwater Pump Bypass.

Results:

2 Elbows 1 >88X of nominal 1 76-70X of nominal M-94 Steam Generator Blowdoun to Condenser.

Results:

8 Elbows 15 >88X of nominal 10 Pipes Housel'esults:

3 88-82X of nominal M-SW Service Water in Screen 8 Elbows 21 >88X of nominal 15 Pipes 6 88-82X of nominal 4 Tees N/A Heater Drain Tank to Condenser.

Summary Numbers 400001 to 400002 Results:

2 Elbows 2 >88X of nominal

l Drawing System

~o ~ Tii]e IP N/A Main Steam Dump to Condenser.

Summary Numbers 400003 to 400004 Results:

2 Reducers 2 >88X of nominal N/A Blowdown Tank to Condenser.

Summary Numbers 400005 to 400006 Results:

1 Elbow 2 >88X of nominal 1 Pipe N/A Blowdown Tank to 3A Low Pressure Heater.

Summary Numbers 400007 to 400008 Results:

1 Elbow 2 >88X of nominal 1 Pipe N/A Gland Steam Discharge to Gland Steam Condenser.

Su'mmary Numbers 400009 to 400010 Com onents Examined: Results:

1 Elbow 2 >88X of nominal 1 Lateral N/A Preseparator Drain to Preseparator Vent.

Summary Numbers 400011 to 400015 Results:

1 Elbow 4 >88X of nominal 3 Pipes 1 <65X of nominal' Tee N/A 4B Low Pressure Heater Vent.

Summary Numbers 400016 to 400025 Results:

3 Elbows 9 >88X of nominal 5 Pipes 1 Tee N/A Steam Extraction To 4A Low Pressure Heater.

Summary Numbers 400047 to 400058 Results:

12 Pipes 6 76-70X of nominal 4 70-65X of nominal 2 <65X of nominal

kt 9 1 ebl

Component Respectable Dispositions:

The following listing of Dispositions provides information on components that have less than 70X of Nominal Wall remaining.

f~s.em: Low Pressure Downcomers in West Condenser.

Component Dwg. ID Summar No. No. No. NCR No. Dis osit.ion 212180 M-10A 18 90-143 Engineering Evaluation, "use-as-is", Reexamine during 1992 outage.

212190 M-10A 19 90-143 Engineering Evaluation, "use-as-is", Reexamine during 1992 outage.

~S t~e~ Low Pressure Downcomers in East Condenser.

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 213060 M-10B 2F 90-142 Engineering Evaluation, "use-as-is", Reexamine during 1992 outage.

~S stem: Feedwater Recirculation (CV-18) ~

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 300440 M-90 43 89-312 No change since last exam during 1989 outage.

~a~t n: Feedwater Recirculation (CV-19),

Component Dwg. ID Summar No, No. No. NCR No. Dis osition 300840 M-91 38 89-279 No change since last exam during 1989 outage.

~tern: Steam Extraction to Preseparator B &, 4B L.P.H.

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 301270 M-21 25 90-128 Component was Replaced.

301290 '-21 27 90-128 Component, was Replaced.

-301300 M-21 28 90-128 Engineering Evaluation, use &s is ~

N

~S st~ Steam Extraction to Preseparator A & 4A L.P.H.

Component Dwg. ID Dis ositi:on 302010 M-22 28 90-131 'ngineering Evaluation, II use-as-is II 302020 M-22 29 90-131 First 20" of component was Replaced.

302130. M-22 38 90-131 Component was Replaced.

~S can'team Extraction to 5A &, 5B H.P.H.

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 303015 M-75 1A 90-168 Component was Replaced.

303017 M-75 1B N/A Component was "pad welded" from I.D. when downstream component was Replaced.

303165 M-75 16A 90-168 Component was Replaced.

303167 M-75 16B N/A Component was "pad welded" from I.D. when downstream component was Replaced.

~S i~taa Steam Generator Blowdown Lines, (Intermediate Building)

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 304425 M-88A 2A 90-150 Adjacent fillet welds were reworked to give a concave shape to reduce stresses.

304435 M-88A 3A 90-150 Adjacent, fillet welds were reworked to give a concave shape to reduce stresses.

Qgg~terg: Steam Generator Blowdown Lines, (Turbine Building)

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 385800 M-88D 80 90-215 Welded rolled plate to O.D.

~i~m'reseparator Drain to Preseparator Vent.

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 400014 N/A N/A 90-216 Engineering Evaluation, II use-as-is tt

~t~ Steam Extraction To 4A Low Pressure Heater.

Component Dwg. ID Summar No. No. No. NCR No. Dis osition 400051 N/A 5 90-131 Engineering Evaluation, ft use-as-is It 400053 N/A 90-131 'ngineering Evaluation, "use-as-is".

400054 N/A 90-131 Engineering Evaluation, "use-as-is",.

400056 N/A 90-131 Engineering Evaluation, "use-as-is".

400057 N/A 90-131 Engineering Evaluation, "use-as-is".

400058 N/A A 90-131 Engineering Evaluation, "use-as-is".

I1 l\

W

}

~ .

MlNWALL MINWALL 1990 GINNA OUTAGE 1990 GINNA OUTAGE 154 160 200 180 140 120 108 150 100 80 100 64 60 40 28 50 19 27 16 17 20 0 0 PIPES ELBOV/S TEES REDUCERS NOZZLES >88% 88-82% 82-76% 76-70% 70-65% >65%

NUhSER OF EACH OOMPONENT TYPE PERCENTAGE OF NOMINAL THAT WAS EXAMNED WALL REhWNING Chart I

J IP I

Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL

- DRAWING NUMBER M-1 200010 1 P 0.602 0.595 88-82 200015 1A P 0.534 0.669 >88

"* DRAWING NUMBER M-4B 204510 51 0.481 0.483 82-76 204520 52 E 0.494 0.494 88-82 204570 57 E 0.434 0.436 76-70 204590 59 E 0.458 0.448 76-70 204600 60 P 0.495 0.444 76-70 204610 61 E 0. 453, 0.491 88-82 204630 63 R 0.469 0.454 76-70 204840'4 P 0.209 0.247" ">88

- DRAWING NUMBER 205040 4 E 0. 323 88-82 205050 5 P 0.342 >88 205160 16 E 0.319 88-82 205170 17 P 0.365 >88 205250 25 T 0.505 >88

- DRAWING NUMBER M-7B 208550 55 T 0.395 >88 208600 60 P 0.298 >88 208610 61 E 0.303 >88 208620 62 P 0.310 >88 208630 63 T 0.362 >88 208640 64 P 0.336 >88

'* DRAWING NUMBER M-10 211060 1F P 0.151 0.273 76-70

- DRAWING NUMBER M-10A 212010 1 P 0.334 >88 212020 2 E 0. 299 >88 212030 3 P 0.324 88-82 212040 4 E 0.327 88-82 212050 5 P 0.333 >88 212060 6 P 0.343 >88 212070 7 E 0.329 88-82 212080 8 P 0.326 88-82 212090 9 E 0;344 >88 212100 10 P 0.324 88-82 212110 11 P 0.344 >88 212120 12 P 0.322 88-82 212130 13 P 0.329 88-82 212150 15 E 0.322 88-82 212160 16 P 0.281 76-70 212180 18 P 0.169 <65 212190 19 P 0.169 <65 Table 1

l f

4 t,

Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL 212200 20 0.314 88-82 212210 21 0.302 82-76 212220'2 0. 318'.

88-82 212230 23 281 76-70 212240 24 0.289 82-76

- DRAWING NUMBER M-10B 213010 2A P 0. 329 88-82 213020 2B P 0.322 88-82 213030 2C P 0.291 82-76 213040 2D P 0.308 88-'82 213050 2E P 0.317 88-82 213060 2F P 0. 176 <65 213070 2G P 0. 318 88-82

- DRAWING NUMBER M-11A 215410 41 P 0. 456 >88 215411 41A E 0.358 88-82 215412 41B P 0. 424 >88 215420 42 E 0.388 >88

- DRAWING NUMBER M-11B ~

216100 88 T 0.363 0. 470 >88 216300 108 P 0.375 0.371 88-82 216440 122 T 0.315 0.358 88-82

- DRAWING NUMBER M-12A 222280 26 P 0.361 0.361 88-82

- DRAWING NUMBER M-12B 222490 47 R 0. 302 88-82 222495 47B P 0.394 >88 222500 48 E 0.429 82-76 222510 49 P 0.386 >88 222890 87 E 0.332 82-76 222900 88 P 0.357 . 0.343 82-76 222905 88A R 0.456 >88 222910 89 T 0.497 , 0.584 >88

- DRAWING NUMBER M-12A 223040 101 E 0.372 0.446 >88'88 223050 102 P 0.400 223080 105 E 0.346 82-76 223090 106 P 0.316 0.304 76-70 223095 106A R 0.421 >88

- DRAWING NUMBER M-15A 226250 25 E 0.259 0.258 88-82 226480 48 E 0.246 0.307 >88 Table 1

~,

I

Page No.

05/15/90

SUMMARY

COMP TYPE 1989'IN ~ 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL

- DRAWING NUMBER M-15B 227440 96 E 0.253 0.299 >88 227500 102 E 0.265 0.285 88-82 DRAWING NUMBER M-16 228060 6 E 0.235 0.260 88-82 228270 27 E 0.288 0.287 88-82

- DRAWING NUMBER M-17A 230410 41 E 0.271 0.316 >88

"* DRAWING NUMBER M-17B 231020 52 E 0.353 0.372 88-82 231410 91 P 0.255 0.313 >88 231420 92 E 0.240 0.297 >88

- DRAWING NUMBER M-18 232070 7 E 0.283 >88 232080 8 P 0.266 88-82 232090 9 E 0.275 88-82 232100 10 P 0.291 >88 232260 26 T 0.338 >88 232330 33 E 0.277 88-82 232340 34 P 0.298 >88 232350 35 E 0.291 >88 232360 36 P 0.293 >88 232520 52 T 0.309 88-.82 232580 58 E 0.481 >88 232590 59 P 0.540 >88

- DRAWING NUMBER M-19 234405 40A E 0.306 0.334 82-76 234420 42 E 0.360 0.362 88-82 234455 45A R 0.374 >88 234457 45B R 0.366 >88 234465 46A R 0.281 >88

- DRAWING NUMBER M-27 253260 26 P 0.309 0.307 82-76 253270 27 E 0.302 0.357 >88

"* DRAWING NUMBER M-28 254250 25 E 0.312 0.385 >88

- DRAWING NUMBER M-31 260020 2 T 0.359 0.466 >88 260241 24A E 0.384 >88 260242 24B E 0.363 88-82 Table 1

e Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL

"* DRAWING NUMBER M-32 261380 38 E 0.396 ~,>88 261390 39 P 0.388 >88 261400 40 E 0.392 >88 261410 41 P 0.390 >88 261420 42 E 0.412 >88 261430 43 R 0.320 >88 261460 46 E 0.533 >88 261470 47 E 0.612 >88 261500 50 P 0.547 >88

- DRAWING NUMBER M-92 281200 20 E 0.450 76-70 281310 31 E 0.351 0.351 >88

- DRAWING NUMBER M-41A 290016 1B R 0.447 >88

- DRAWING NUMBER M-41B 291020 41 E 0.417 >88 291030 42 P 0.407 >88

- DRAWING NUMBER M-45 298520 52 P 0.332 0.319 76-70

"* DRAWING NUMBER M-90 300440 43 P 0.297 0.298 70-65

- DRAWING NUMBER M-91 300840 '38 E 0.291 0.297 70-65

- DRAWING NUMBER M-21 301025 2A D 0.362 0.351 76-70 301040 4 P 0.703 >88 301050 5 E 0.809 >88 301100 10 R 0.759 >88 301180 17 E 0.759 >88 301250 23 P 0.400 82-76 301260 24 E 0.267 76-70 301270 25 P 0. 151 <65 301280 26 E 0.324 88-82 301290 27 P 0.233 <65 301300 28 E 0.258 70-65 301310 29 P 0.275 76-70

'301320 30 T 0.496 0.473 76-70 301390 37 E 0.309 88-82 301400 37A P 0.342 >88 301405 39B P 0.333 >88 301410 38 E 0.312 88-82 301420 39 P 0.354 >88 Table 1

W

~\

I' 1

'Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL 301425 39A E 0.338 >88 301430 40 E 0. 356 >88 301450 42 P 0.361 >88 301470 44 E 0.374 >88

- DRAWING NUMBER M-22 301705 1B D 0.342 0.400 82-76 301780 9 E 0.669 0.676 76-70 301830 14 R 0.733 88-82 302010 28 P 0.320 <65 302020 29 P 0.155 <65 302030 30 E 0.328 88-82 302090 35 E 0.332 0.311 88-82 302110 37 T 0.502 0.498 76-70 302120 37A P 0.300 82-76 302130 38 E 0.185 <65 302140 39 P 0.324 88-82 302150 40 E 0.298 82-76

- DRAWING NUMBER M-75 303010 1 P 0.318 88-82 303015 1A R 0. 110 <65 303017 1B N 0.200 <65 303020 2 T 0.343 0.318 88-82 303160 16 P 0.353 >88 303165 16A R 0.161 <65 303167 16B N 0.250 <65 303220 22 P- 0.271 0.366 >88 303230 23 T 0.318 0.463 >88 303235 23A P 0.344 >88 303240 24 E 0.211 0.372 >88

- DRAWING NUMBER M>>88A 304420 2 E 0.160 0. 160 76-70 304425 2A P 0.170 0. 150 70-65 304430 3 V NE 304435 3A P 0. 160 0. 140 <65 304440 4 E 0.160 0. 180 88>>82 304450 5 P 0. 250 >88 304460 6 V NE 304560 16 E 0.283 >88 304950 55 E 0. 150 0.160 76-70 304955 55A P 0.160 0.160 76-70 304960 56 E 0.280 >88 304970 57 P 0.150 0.160 76-70 304980 58 E 0.300 >88 304990 59 V NE 305000 60 P 0. 170 0.250 >88 305010 61 V NE 305020 62 P 0.170 0.220 >88 Table 1

k*

\,

-1

\

el.

P 1

~I 4

Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL 305090 69 E 0.261 88-82

- DRAWING NUMBER M-48 320370 37 E 0. 265 >88 320390 39 P 0.287 >88 320400 40 E 0.285 >88

- DRAWING NUMBER M-49 323420 42 P 0.266 0.269 >88

- DRAWING NUMBER M-47 327070 7 E 0.296 0.321 88-82 327080 8 P 0.352 >88 327180 18 T 0.330 >88'88 327190 19 P 0.278 327200 20 E . 0.287 >88 327250 25 E 0. 314 88-82 327500 50 E 0.288 >88 327510 51 P 0. 292 >88 327570 57 E 0.348 >88

- DRAWING NUMBER M-46B 328115 11A R 0. 311 >88 328125 12A R 0.352 >88 328130 13 P 0.420 >88

- DRAWING NUMBER M-46A 329230 53 E 0.362 0.352 82-76

" DRAWING NUMBER M-88D 385010 1 E 0.280 >88 385080 8 P 0.262 88-82 385100 10 P 0.288 >88 385260 26 E 0.275 >88 385290 29 P 0.286 >88 385420 42 E 0.289 >88 385470 47 P 0.273 >88 49 P '85490 0.255 88-82 385660 66 E 0.271 >88 385680 68 P 0.272 >88 385800 80 L 0.308 <65

- DRAWING NUMBER M-81 390060 6 R 0.653 0. 614 76-70

- DRAWING NUMBER M-94 395010 1 P 0.277 >88 395030 3 . P 0.301 >88 395040 4 "

E 0.267 0.270 >88 395100 10 E 0;242 0.277 >88 Table 1

4f Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN.'ERCENT NUMBER NO. READING READING NOMINAL 395180 18 E 0. 290 >88 395190 19 P 0.280 >88

.395210 2r. P' 0.306 >88 395230 23 0.298 >88 395240 24 E 0.293 88-82 .

395270 27 P 0.305 >88 395290 29 P 0.288 >88

'95360 36 E 0.231 0.262 88-82 395400 40 E 0.281 >88 395440 44 E 0.259 88-82 395450 45 P 0.280 >88 395470 47 P 0.302 >88 395490 49 P 0.'300 >88 395500 50 E 0.309 >88

- DRAWING NUMBER NA 400001 NA E 0. 759 >88 400002 NA E 0.672 >88 400003 NA R 0.381 >88 400004 NA R 0.359 >88 400005 NA P 0.397 >88 400006 NA E 0.427 >88 400007 NA E 0.277 >88 400008 NA 'P 0.265 >88 400009 NA L 0.234 >88 400010 NA E 0.252 >88 400011 NA E 0.240 >88 400012 NA P 0.160 >88 400013 NA T 0.200 >88 400014 NA P 0.102 <65 400015 NA P 0.200 >88 400016 NA P 0.195 >88 400017 NA E 0.190 >88 400018 NA P 0.200 >88 400019 NA E 0.230 >88 400020 NA P 0.195 >88 400021 NA T 0.250 >88 400023 NA P 0.180 >88 400024 NA P 0.180 >88 400025 NA E 0.230 >88

- DRAWING NUMBER M-89A 400026 14 N 0. 500 >88 400027 15 P 0.'225 >88 400028 16 T 0.270 >88 400029 17 P 0.218 >88 400030 18 T 0.350 >88 40003'1 19 P 0.210 >88 .

400032 20 P 0.179 >88 400033 28 P 0.210 >88 Table 1

Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL 400034 29 0.270 >88 400035 30 0.210 >88

- DRAWING NUMBER M-89B 400036 8A P 0. 190 88-82 400037 9 T 0.300 >88 400038 11 P 0.220 >88 400039 12 P 0.190 88-82 400040 24 P 0.170 >88

- DRAWING NUMBER M-89C 400041= 26 T 0.300 >88 400042 27 P 0.180 88-82 400043 28 E 0.300 >88 400044 29 P 0.190 88-82 400045 30 T 0.290 >88 400046 31 P 0.170 82-76

" DRAWING NUMBER NA 400047 1 P 0.281 76-70 400048 2 P 0.261 76-70 400049 3 P 0.280 76-70 400050 4 P 0.274 76-70 5 '00051 P 0.259 70-65 400052 6 P 0.267 76-70 400053 7 P 0.250 70-65 400054 8 P -0.253 70-65 400055 D P 0.274 76-70 400056 C 0.234 (65 400057 B 0.247 70-65 400058 A 0.230 <65

- DRAWING NUMBER M-SW 400059 1 E 0.360 >88 400060 2 E 0.361 >88 400061 3 E 0.350 >88 400062 4 E 0. 359 >88 400063 5 P 0.337 >88 400064 6 P 0. 342 >88 400065 7 P 0. 332 >88 400066 8 P 0. 321 88-82 400067 9 E 0.346 >88 400068 10 E 0.341 >88 400069 11 E 0.365 >88 400070. 12 E 0.355 >88 400071 13 P 0.312 88-82 400072 14 P 0.331 >88.

400073 15 P 0.353 >88 400074'00075 16 P 0.346 >88 17 P 0.322 88-82 Table 1

I Page No.

05/15/90

SUMMARY

COMP TYPE 1989 MIN. 1990 MIN. PERCENT NUMBER NO. READING READING NOMINAL 400076 18 T 0.468 >88 400077 19 P 0.325 88-82 400078 20 T 0.425 >88 400079 21 P 0.331 >88 400080 22 P 0.327 88-82 400081 23 P 0.335 >88 400082 24 T 0.458 >88 400083 25 P 0.330 88-82 400084 26 T 0.425 >88 400085 27 P 0.337 >88 Abbreviation Component Type D= Downcomer E= Nozzle P- Pipe R= Reducer T= Tee Table l

kgb I

l

GINNA NUCLEAR POWER STATION Inservice Inspection Report 1990 1999 Interval, First Outage 1990 Attachment III Miscellaneous NDE Examination Summary Report This section consist of all examinations performed as a "service" by Materials Engineering and Inspection Services. The documented results of the below listed examinations have been submitted to the requesting individual and/or department for proper processing. The results of all examinations listed below in this "Mis'cellaneous" Section are acceptable unless otherwise specified.

The following examinations were performed under the Maintenance Inservice Inspection Program (MISIP).

A. Visual Examinations:

1. Reactor Coolant Pump Motor Lift Sling.

2. Reactor Vessel Head Lift Rig.

3. Reactor Vessel Internals Lift Rig.

4. Steam Generator "A" 8c "B"- Tubelane Blocking Device Tack Welds.

B ~Ma netic Particle Examinations:

1. Containment Crane Hooks 7 Hooks Total.

2. Reactor Head Chain Hoist Hooks 3 Hooks Total.

3. Forklift Forks - 11 Forklift Trucks Total.

4. Pallet Cart Forks "A"11 Pallet Carts Total.

5. Steam Generators 4, "B" Secondary Manway Covers.

6. Steam Generator "B" ¹4 and ¹6 Wedge Port Covers.

C. Visual and Liciuid Penetrant Examinations:

1. Steam Generator Nozzle Dams 10 Dams Total.

D. Ultrasonic Examinations:

1. Steam Generator "B" - ¹4 and ¹6 Wedge Port Bolts.

E. Visual and ~Ma netic Particle "A"

Examinations:

"B"

1. Steam Generators and Handhole Covers North and South.

t f

P. Visual ~Ma netic Particle and Ultrasonic Examinations:

1. Steam Generators "A" and "B" Secondary Manway Bolts.

2. Steam Generators "A" and "B" Handhole Cover Bolts North and South.

3. Steam Generator "A" - Outlet Nuts and Studs.

4. Steam Generator "B" Inlet Nuts and Studs.

5. Steam Generator "B" Outlet Nuts and Studs.

~urb'ne Com o ants:

The following examinations were performed on Turbine Components.

Note: Respectable Examination results are reported to the Turbine Department for disposition and corrective action as required.

A. Visual Examinations:

1. Inner Cylinder (¹2) - Stationary Blade Rings Governor End, Stages 8, 9, 10 and 11.

B. Liciuid Penetrant Examinations:

1. L.P. Turbine ¹3 Bearing'abbitt Surface.

2. Valve Stem Seat Main Steam Stop Valve..

3. Stellite Seats ¹2 and ¹4 Control Valves.

4. Outer Diaphragm Top Outside Welds.

II, /

Indication. Bottom Inside Welds.

5. Outer Diaphragm Re 'ectable -Inside Welds; Vertical Weld ¹3, 4 1/2" Linear Thru Wall Indication; Welds ¹ 7 &, 8, 22 Cold Lap Indications.

6 ~ Inner Diaphragm Top Outside Welds.

7. Inner Diaphragm Bottom Inside Welds.

8. "C" L.P. Rotor Stellite Ends.

Re 'ectable Blade W7G at Governor End Stage 9 contained Linear Indication 1/4" Long at Blade Edge.

9. "1" LE P. Rotor Outer Diaphragms crossover Pipe.

C. ~Ma netic Particle Examinations:

1. L.P. Turbine Inner Cylinder-Blade Rings &, Flow Dividers, I

21 Linear Indications at Inner Edge of Blades; Upper Blade Ring 4th Stage Contained 9 Linear Indications on Inner Edge of Blades; Lower Blade Ring 2nd Stage Contained 4 Linear Indications on Inner Edge of Blades; Upper Blade Ring 2nd Stage contained 9 Linear Indications on Inner Edge of Blade; 3rd Stage Contained 2 Linear Indications on Inner Edge of Blade and Between the 3rd and 4th Stages had 1 Linear Indication on Base Surface; Lower Blade Ring 4th Stage Contained 45 Linear Indications on Inner Edge of Blades.

C~

'K tl l

A l

2 ~ ¹2 Inner Cylinder Governor End Stages.

Weld-Steam Undercut on Base Side.

a

3. Upper Inner Cylinder Steam Seals, Control Valve Muffler and Baskets.

II Indications on Inner Edge, of Blades; ¹1 Upper Inner Cylinder (other side) Contained 12 Indications on Inner Edge of Blades.

4. Inner, Crossover Diaphragm.

5. Outer Crossover Diaphragm.

6. "C" L.P. Rotor - End Shafts.

7 ~

"C" L.P. Rotor Generator End - Stages 1 11.

8. "C" L.P. Rotor Generator End Stages 1 11.

D. Ultra sonic Examinations:

1 ~ ¹5 Bearing Top &, Bottom Halves Babbitt, Bonding.

2 ~ Inner 8L Outer Shell Dowel Studs 14 Studs Total.

3 ~ Inner &, Outer Shell Studs 92 Studs Total.

4e Control Valve Studs 52 Studs Total.

5. Stop Valve Studs 30 Studs Total.

6. Crossover Hi Hat Studs 52 Studs Total.

7 ~ Inner Cylinder Shell Studs 55 Studs Total.

8. H.P.'oupling Studs 20 Studs Total.

9. Stop Valve Pilot &, Mummy Studs 24 Studs Total.

10. Outer Cylinder Shell Studs 52 Studs Total.

11 Jack Shaft Thrust Studs 30 Studs Total.

'2 Cross Pipe Vertical Joint 44 Studs Total.

'3 Crossover Pipe Diaphragm 52 Bolts Total.

'4.

Crossover Studs 5 Studs Total.

15. Inner Cylinder 17 Studs Total.

16. Control Valve Tension Bolts 2 Bolts Total.

17 Blade Ring 4 Studs Total.

'8.

Stud 688J343-19 25 Studs Total.

19. Inner Shell Studs 682J249-23 2 Studs Total.

20. Inner Shell Studs 682J343-21 4 Studs Total.

21 Inner Shell Studs 682J343-16 4 Studs Total.

'2 Upper Studs 885J343-19 25 Studs Total.

'3 Inner Shell Studs -'82J342-15 12 Studs Total.

'4

~ Miscellaneous Turbine Studs 120 Studs Total.

E. Liciuid Penetrant and Ultrasonic Examinations:

1. Upper Babbitt,

2. Lower Babbitt.

II~

~Wor $ 4eceests ~WR~P The following examinations were performed in support of Engineering Work Requests (EWR's).

A. Visual Examinations:

1. 1/2" Valves 1032-1 &, 1032-2, Cleanliness-EWR 4613.

the Joint "Prep" Joint, g3. Burr removed and verified by

'luor 20" Daniel QC personnel Accepted.

2. Service Water Header, Cleanliness-EWR 4930.

B. Radio ra hic Examinations:

1. Containment Penetration 2 Welds EWR 4998 '

and Linear Indications. Repaired, Re-examined and Accepted.

C. Visual and Ultrasonic Examinations:

1. Heater Drain Tank Pump Barrels "A" 8L "B" EWR 5053.

The following examinations were performed in support of Maintenance Work Orders (MWO's).

A. Visual Examinations:

1. CV Equipment Hatch Geneva Latch Plug Welds.

2. CV Floor Grating Tack Welds.

3. Pressurizer Safety Line Nuts for Valves 434 &, 435 Replacements (48 nuts &. 93 studs accepted).

Q Contained Axial Cracks in Hex Head, 2 Nuts Contained Thread Damage that Prevented Engagement on Stud.

B. Ultrasonic Thickness Examinations:

1. H.P. Turbine Drain Lines Pipe &, Fittings Wall Thickness.

C. Visual and L'iciuid Penetrant Examinations:

1. 3/4" Nitrogen Supply to AOV-846, 8 Socket Welds.

2. Charging Pump "A" - 3/4" Valve 281C &, Piping - 8 Welds.

3. Safety Injection Pump "B" 3/4" Nipple to Elbow Weld.

4. MSIV 3516 Lug & Nut Locking Weld.

1 .e a',q

5. MS Non-return Check Valve 3518B Disc Stop Welds.

Re-Examined after Repairs-Acceptable.

6. MS Non-return Check Valve 3519A Disc Stop Welds.

Re-Examined after Repairs-Acceptable.

7. "A" &, "B" Service Water Pressure Gage Header -Pipe Coupling Welds. (1" pipe to coupling to 20" pipe) 8 ~ Charging Pump "A", Valve 285 to Pipe Weld.

9. Charging Pump "B", Valve 284 to Pipe Weld.

"C",

10. Charging Weld Pump

/"

Valve 283 to Pipe Weld.

Centerline. Reexamined after repairs ,

/

accepted.

D.

k.

The

~

Liciuid Penetrant and ~Ma netic Particle Examinations:

1 ~

"A" Preseparator 16" Diameter Pipe Replacement 3 Welds.

miscellaneous work.

A.

e following examinations were performed in support of Visual Examinations on Welds:

1, Astregal Plate Welds Fire Door ¹ 23.

2. Skin Repair Fire Door ¹ F-500.

3. Heater Drain Tank at Valve 3098, 1/2" Socket Welds 3 Welds.

4. Freeze Plugs in Nitrogen Supply Lines.

5. "B" Reactor Coolant Pump Insulation Support Welds.

6, Steam Generator Blowdown Socket Welds.

7. DI System - Valve 8419 Valve Cap.

8. Steam Generator Blowdown Valve 5701, 2 Welds.

9. "B" Steam Extraction Line 5 Welds.

10. Check Valve 4023 Tack Welds.

11. Personnel Hatch Outer Door Geneva Latch Plate Plug Weld.

12. Steam Generator Blowdown Valve 5735 8 Socket Welds.

13. Equipment Hatch Rollup Door Channel to Plate, Angle and Lug ~

14. "B" CCW Pump Motor Stand to Base Plate.

B. Visual Examinations on Com onents:

1. Class 2 Valve Upgrade for Henze Valve Nuts.

2. Valve Stem Feedwater Valve 4269.

3. Steam Generator Primary Manway Washers 201 Washers Accepted.

Re 'ectable 2 Washers Contained Machine Cuts on ID Surface.

s t4r .

Ci P'1 yr

4, Steam Support S-4, Re-exam for NCRG89-365.

5. Service Water Headers Screen House Min Wall & Surface Condition.

6. Service Water 20" Header Pipe Downstream of Support 7

'ain

~

SWU-616.

Fire Doors ¹37, ¹46, ¹27, ¹26, ¹79, ¹61 and ¹62 Fillet Welds.

8. Service Water Screen House Surface Condition Downstream from Valve 4606'.

/ "

/

Wall Thickness Resulted in Identifying Wall to be 0.355" Thick. Remaining Wall Thickness is 0.305". Wall Loss at This Area 14X.

9 ~ Service Water Screen House Surface Condition Downstream from Support SW-620.

Re ectable Random Pitting and Undercut Around Entire Circumference. Pitting 8 to 17X of Wall Thickness ( 1/64" to 1/16" Deep).

10 "A" Service Water Pump 2 Rigid Restraints.

C. Liciuid Penetrant Examinations on Com onents:

1. Ten Inch (10") SI Line, 2" Weld-0-Let " to Pipe.'

/

90-102 Generated. Defects were Repaired by Blending, Re-.

examined -Acceptable.

2. Freeze Plugs for Leakage Examination on Pipe 2 Areas.

3. Main Feedwater Pump Shaft &, Impeller.

4. Feedwater Valve 4272 Seat Examination.

5. Low Pressure Steam Extraction Bellows Welds.

6,. Valve 4270 - Stem, Seats, Plug &, Gage.

7. Valve ¹ 390 Filter Vent Socket Weld.

8. CVCS Pipe to Valve ¹ 390.

9. Hanging Scaffolds, Al, A2, Bl, B2 & B3, 25 Welds Total.

Re 'ectable -Linear Indications in Bl &" B2. These welds are to be repaired and reexamined before the 1991 AI&0,

10. Bolts from Check Valves 870A, 870B, 889A & 889B.

D. ~Ma netic Particle Examinations on Com onents:

1 ~ Auxiliary Feedwater Valve 4017 Seat Area.

NCR 90-96 was Generated. Defects were Repaired and Re-examined -Acceptable.

2. L.P. Steam Extraction to 2A Heater Bellows.

3. Steam Extraction Pipe to Elbow Welds.

4. Steam Extraction to 5A &, 5B Heaters Reducer Welds (2).

5. Blowdown to Blown Tank Component 80 Pad Weld.

E. Ultrasonic Examinations on Com onents:

l. Auxiliary Feedwater-Three Supports-Verify Bolt Lengths.

2. 1A &. 1B Diesel Generators-Ductwork-Verify Bolt Lengths.

3. Spent Fuel Pit "A" - Verify Bolt Support AFW-600, Verify Bolt Lengths.

Lengths'.

I ~

4g

-S A

Pl t4 rr t

jg I

5. Support SWU-623, Verify Bolt Lengths.

6, Service Water 14" Diameter Pipe Wall Thickness.

7. Support SWU-625, Verify Bolt Lengths.

8. S/G "A", Swirl Vane Wrapper- Wrapper Thickness.

Generated. Fabricated and Installed 7 Impingement Plates on Severely Eroded Areas. Use-As-Is on Feedwater Tee Erosion. A Monitoring Program Initiated for the Feedwater Tee 8c Steam Generator Wrapper Erosion not Repaired in. the 7 Areas Above.

9. S/G "B", Swirl Vane Wrapper- Wrapper Thickness.

Re 'ectable Wrapper Thickness Eroding, NCR 90-124 Generated, Action Taken was Incorporated into Item 48 Above.

10. Sampling Line at AOV 5736 Wall Thickness.

11. Service Water Support SWU-631, SWU-632, SWU-633 and SWU-634, Verify Bolt Lengths.

12. Service Water Support SWU-568, Verify Bolt Lengths.

F. Visual and Liciuid Penetrant Examinations on Com onent.s:

1. RHR System By Valve 687B - Sock-o-let Weld.

2. Service Water Header Valve 4799 2 Welds, Coupling, and "Prep" Areas.

G. Visual and ~Ma netic Particle Examinations on Com onents:

l. "A" S/G - Swirl Vane Wrapper Patches.

Generated, Action Taken was Incorporated into Items 48 & 9 in Paragraph E Above.

2. Main Steam System Valve 3411 Flange Seal Area.

H. Visual ~Ma netic Particle F. Ultrasonic Examinat.iona on Com onents:

1. Retaining Block Studs Baseline for Valves 870A, 870B, 880A and 880B.

~

1. Pipes and Elbows in the Min-Wall (Wall Thickness) Program.

2. "B" Reactor Coolant Pump Insulation Support Bushings.

1. Service Water Elbow Downstream of Valve 9633B.

2. Standby Auxiliary Feedwater -Pipe by Support SWO-508 0.207" Thickness, 1"

1. 3/4," Chemical Feed Line to "A" S/G Feedwater.

Angle Iron. Missing Nut on U-Bolt.

b

/fan

ML17261B139: Difference between revisions

Latest revision as of 10:53, 4 February 2020

Contents

Text

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

Navigation menu

ML17261B139: Difference between revisions

Latest revision as of 10:53, 4 February 2020

Text

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

Navigation menu

Search