ML17324A935: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(3 intermediate revisions by the same user not shown)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:C~i~)INDIAItIA EI MICHIGAIV EIECTDIC CDAIPANY IINALD C.COOK NUCme PLA,NT FOAM W?C PROCEDURE COVER SHEET**1%P 6P30 IMP.3P5 Procedure No.Reviaion No.TITLE APPETIT)EX R POST-FIRE REPCNKKtK OF VALVES SCOPE OF REVlSlON C g i cKTt3 MAY g 9)geg Cot~FRP>l,I.D LOCO...SIGNATURES REVISION NUMBER PREPARED BY r P DEPARTMENT HEAD APPROVAL INTERFACING DEPARTMENT HEAD CONCURRENCE QUALITY ASSURANCE SUPERVISOR APPROVAL PLANT NUCLEAR SAFETY COMMITTEE PLANT MANAGER APPROVAL APPROVAL DATE 8606130117 86060 PDR ADOCK 05000315 F PDR I EFFECTIVE DATE l S I l**1 THP 6030 IMP.305 LIST OF EFFECTIVE PAGES PAGE NUMBER Page 1 of 18 Page 2 of 18 Page 3 of 18 Page 4 of 18 Page 5 of 18 Page 6 of 18 Page 7 of 18 Page 8 of 18 Page 9 of 18 Page 10 of 18 Page ll of 18 Page 12 o f 18 Page 13 of 18 Page 14 of 18 Page 15 of 18 Page 16 of 18 Page 17 of 18 Page 18 of 18 REVISION NUMBER CS NUMBER Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 5 a V I l APPENDIX A Page 1 of 31 Page 2 of 31 Page 3 of 31 Page 4 of 31 Page 5 of 31 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Page 1 of 2 Rev.0
{{#Wiki_filter:~ i ~
**1 THP 6030 IMP.305 PAGE NUMBER Page 6 of 31 Page 7 of 31 Page 8 of 31 Page 9 of 31 Page 10 of 31 Page ll of 31 Page,12 of 31 Page 13 of 31 Page 14 of 31 Page 15 of 31 Page 16 of 31 Page 17 of 31 Page 18 of 31 Page 19 of 31 Page 20 of 31 Page 21 of 31 Page 22 of 31 Page 23 of 31 Page 24 of 31 Page 25 of 31 Page 26 of 31 Page 27 of 31 Page 28 of 31 Page 29 of 31 Page 30 of 31 Page 31 of'1 REVISION NUMBER CS NUMBER Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Revision 0 Page 2 of 2 Rev.0
C
**1 THP 6030 IMP.305 INDIANA 6 MICHIGAN ELECTRIC COMPANY DONALD C COOK NUCLEAR PLANT APPENDIX R POST FIRE REPOWERING OF IN-CONTAINMENT VALVES U-1.0 OBJECTIVE 1.1 Provision of a repair procedure for inside containment motor-operated valves requiring post-fire operation in the event of a loss of control from the Unit 1 Control Room.This procedure allows the alternative operation of these valves from outside of the containment and eliminates the need for plant personnel to enter the containment to manually operate these valves.1.2 DISCUSSION Sequence of events for repair and operation of a containment valve.1 2~1 1.2.2 Maintenance will disconnect the power source from the motor control center (MCC)containing the motor starter for the valve to be repaired.An alternate power feed from a previously de-energized circuit, will be connected to the MCC by maintenance.
  )
CEI will disconnect the external wiring from the applicable motor starter, and will connect a temporary valve control and indicating panel to the motor starter circuit.1.2.3 1.2.4 Operations will then turn on the alternate power source, and operate the valve.Operations turns off alternate power to the MCC.1 2.5 C&I disconnects the temporary control and indicating panel from the motor starter circuit.Step 1.2.2 will be repeated for the motor starter in the same MCC, for the next valve to be operated, followed by steps 1.2.3, 1.2.4 and 1.2.5, until all valves powered from the MCC have been operated.1.2.6 Motor Control Centers may be de-energized and motor starters modified in any convenient order.One,'r any number, of motor starters in an MCC may be modified as deemed necessary.
FOAM W?C INDIAItIA     EI MICHIGAIV EIECTDIC CDAIPANY IINALDC. COOK NUCme PLA,NT PROCEDURE COVER SHEET
Page 1 of 18 Rev.0
                                                                              **1 %P     6P30 IMP.3P5 Procedure No.
**1 THP 6030 IMP~305 1..2.7 This post-fire repair procedure is intended to provide the plant operators with an alternative method of aligning the following inside-containment motor-operated valves from their associated motor control centers located in the engineered safety system and MCC Room at elevation 609 Ft.in the Auxiliary Building: Valve No.IMO-110 IMO-120 IMO-130 IMO-140 IMO-128 ICM-129 NMO-151 NMO-152 NMO-153 ICM-ill Containment Valve Descri tion Accumulator Isolation Valve Accumulator Isolation Valve Accumulator Isolation Valve Accumulator Isolation Valve RHR Inlet Isolation Valve RHR Inlet Isolation Valve Pressurizer PORV Block Valve Pressurizer PORV Block Valve Pressurizer PORV Block Valve RHR Outlet Isolation Valve MCC 1-EZC-C 1-EZC-B 1-EZC-D 1-EZC-A 1-EZC-B 1-EZC-C 1-EZC-A 1-EZC-B 1-EZC-D l<<EZC-C 1.2.8 This procedure is referenced in and should be used to supplement 12 OHP 4023.100.001,"Unit fl Emergency Remote Shutdown" procedure.
Reviaion No.
TITLE     APPETIT)EX R POST-FIRE REPCNKKtK OF VALVES SCOPE OF REVlSlON C g i cKTt3 MAY g   9)geg Cot~FRP>l,I.D LOCO...
SIGNATURES                               REVISION NUMBER r  P PREPARED BY DEPARTMENT HEAD APPROVAL INTERFACING DEPARTMENT HEAD CONCURRENCE QUALITY ASSURANCE SUPERVISOR APPROVAL 8606130117 86060 PLANT NUCLEAR                                 PDR  ADOCK 05000315 F                    PDR SAFETY COMMITTEE I
PLANT MANAGER APPROVAL APPROVAL DATE EFFECTIVE DATE


===1.3 ASSUMPTIONS===
l S  I                                    **1 THP 6030 IMP.305 l
1.3.1 A loss of total plant off-site power for 72 hours.1.3.2 A fire in any one of the following plant areas: NOTE: (a)Control Room, or (b)Control Room Cable Vault, or (c)Auxiliary Cable Vault, or (d)Switchgear Room Cable Vault As indicated in the"Objective" section of this procedure, the primary concern is loss of control from thc Control Room.However, it is not the intent of this procedure to limit Control Room usc.This procedure may be used for any fire which occurs outside of the, fire areas containing the valves, motor control centers, electrical penetrations and valve cables (routed from a motor control center to a valve)as specified by this procedure.
LIST OF EFFECTIVE PAGES PAGE NUMBER                      REVISION NUMBER  CS NUMBER    5 Page 1 of 18                    Revision  0 Page  2 of 18                    Revision  0 Page  3 of 18                    Revision  0 Page 4 of 18                      Revision  0 Page  5 of 18                    Revision  0 Page 6 of 18                      Revision  0 Page 7 of 18                      Revision  0 Page 8 of 18                      Revision  0 Page 9 of 18                      Revision  0                a V
Page 2 of 18 Rev 0  
I l
**1 THP 6030 IMP~305 2~0 REFERENCES 2.1 10 CFR 50, Appendix R, Section III L.2.2 PMI-2270, Fire Protection.
Page 10 of 18                    Revision  0 Page ll  of 18                    Revision  0 Page 12 o  f 18                  Revision  0 Page 13  of  18                  Revision  0 Page 14  of  18                  Revision  0 Page 15  of  18                  Revision  0 Page 16  of  18                  Revision  0 Page 17  of  18                  Revision  0 Page 18  of 18                   Revision  0 APPENDIX A Page 1 of  31                    Revision 0 Page 2 of  31                  Revision  0 Page 3  of  31                  Revision  0 Page 4  of  31                  Revision  0 Page 5  of  31                  Revision  0 Page 1 of 2 Rev. 0
2.3 PMI-2140, Temporary Modifications.


===2.4 AEPSC===
                  **1 THP 6030 IMP.305 PAGE NUMBER  REVISION NUMBER  CS NUMBER Page 6  of 31 Revision 0 Page 7 of 31  Revision 0 Page 8 of 31  Revision 0 Page 9 of 31  Revision 0 Page 10 of 31 Revision 0 Page ll of 31 Revision 0 Page,12 of 31 Revision 0 Page 13 of 31 Revision 0 Page 14 of 31 Revision 0 Page 15 of 31 Revision 0 Page 16 of 31 Revision 0 Page 17 of 31 Revision 0 Page 18 of 31 Revision 0 Page 19 of 31 Revision 0 Page 20 of 31 Revision 0 Page 21 of 31 Revision 0 Page 22 of 31 Revision 0 Page 23 of 31 Revision 0 Page 24 of 31 Revision 0 Page 25 of 31 Revision 0 Page 26 of 31 Revision 0 Page 27 of 31 Revision 0 Page 28 of 31 Revision 0 Page 29 of 31 Revision 0 Page 30 of 31 Revision 0 Page 31  of'1 Revision 0 Page 2 of 2 Rev. 0
Plant Drawings 1-97331, 1-97332, 1-1316, 1-1315.2.5~*12 OHP 4023.100.001, Unit 41 Emergency Remote Shutdown.2.6~*1 MHP 2140.082.005, Maintenance Procedure for Repowering Containmcnt Valves.3.0 PRECAUTIONS 3.1 When routing temporary cables, do not obstruct walkways.Cables shall be routed off to the side or overhead when possible.3.2 Though the circuits being worked on are de-cncrgizcd, other circuits in close proximity may have voltages present;observe all electrical safety precautions while working on or near energized equipment.


===3.3 Ensure===
                                                **1 THP 6030 IMP.305 INDIANA 6 MICHIGAN ELECTRIC    COMPANY DONALD C    COOK NUCLEAR PLANT APPENDIX R POST FIRE REPOWERING OF IN-CONTAINMENT VALVES U-1.0 OBJECTIVE 1.1  Provision of a repair procedure for inside containment motor-operated valves requiring post-fire operation in the event of a loss of control from the Unit 1 Control Room. This procedure allows the alternative operation of these valves from outside of the containment and eliminates the need for plant personnel to enter the containment to manually operate these valves.
that all connections are clean and tight.3.4 It is'ssumed that the equipment required by this procedure is available.
1.2 DISCUSSION Sequence  of events for repair    and operation  of  a containment valve.
Additionally, usc of equipment required from thc opposite (unaffected) unit should not impair safe continued operation or shutdown of that unit.4.0 PREREQUISITES 4.1 This proccdurc is to interface with Maintenance Department procedure**1 MHP 2140.082.005,"Maintenance Procedure for Rcpowering Containmcnt Valves", which is the controlling procedure for containmcnt valve repair.4.2 Striped-tag clearances must bc transferred to C&I from Maintenance Department prior to working on valve motor controls or associated circuitry.
1 2~1     Maintenance will disconnect the power source from the motor control center (MCC) containing the motor starter for the valve to be repaired. An alternate power feed from a previously de-energized circuit, will be connected to the MCC by maintenance.
4.2.1 When the temporary valve control panel has been connected, Operations is to be informed that power may be turned on and the valve may be operated.Page 3 of 18 Rev 0
1.2.2     CEI will disconnect the external wiring from the applicable motor starter, and will connect a temporary valve control and indicating panel to the motor starter circuit.
**1 THP 6030 IMP~305 4.3 Verify that all terminals are de-energized prior to lifting or landing wires.5~0 CONTAINMENT VALVE REPAIR PROCEDURE 5.1 Coordinate with Maintenance Department to determine which MCC has been de-energized and which motor starters will be modified.5.1.1 5.1.2 ,5 1 3 Motor Starters may be modified in any order required, providing the MCC feeding the starters has been de-energized.
1.2.3     Operations will then turn on the alternate power source, and operate the valve.
Any number, or all, valve motor starters in an MCC may be modified as deemed necessary.
1.2.4     Operations turns off alternate power to the MCC.
Verification of lifted wire signatures will document which motor starters are modified.5.2 Verify that a clearance has been taken on the MCC feeding the selected motor starters, and that the associated circuit breaker is open.5.3 Open the Breaker compartment front door.CAUTION: Verify that all terminals are de-energized prior to lifting or landing wires.5.4 Lift the external wires listed, from their associated terminal pornts.This will disconnect the"low side" of the red and green indicating lights on panel"SIS'r RHR".Independently verify lifted leads.5.4.1 Verify MCC 1-EZC-A has been de-energized.
1 2.5     C&I disconnects    the temporary control and indicating panel from the motor starter circuit.
MAINT~CSI'or IMO-140 and/or NMO-151 located in l-EZC-A, disconnect the following external wires: MCC-1EZC-S VALVE IMO-140 TERM POINT NO.12 13 WIRE NO.12 13 VERIFY LIFTED WIRE TECH 1 TECH 2 EXT.CABLE NO 9102R-1 9102R-1 NMO-151 12 13 12 13 Page 4 of 18 Rev.0 8676R-1 8676R-1
Step 1.2.2   will be  repeated for the motor starter in the same MCC, for the next valve to be operated, followed by steps 1.2.3, 1.2.4 and 1.2.5, until all valves powered from the MCC have been operated.
*~I THP 6030 1M'05 5;4.2 Verify MCC 1-EZC-B has been de-energized.
1.2.6     Motor Control Centers may be de-energized and motor starters modified in any convenient order. One,'r    any number, of motor starters in  an MCC  may be  modified as deemed necessary.
MAINT~C&I For IM0-120, IMO-128 and NMO-152 located in l-EZC-B, disconnect the following external wires: VALVE IMO-120 IMO-128 NMO-152 TERM POINT NO.12 13 12 13 WIRE NO.12 13 12 13 VERIFY LIFTED WIRE TECH 1 TECH 2 EXT.CABLE NO 8870R-1 8870R-1 8871R-1 8677R-1 8677R-1 5.4.3 Verify MCC 1-EZC-C has been de-energized.
Page 1 of 18 Rev. 0
MAINT, C&I For IMO-110, ICM-129 and ICM-ill located in l-EZC-C, disconnect the following external wires: VALVE IMO-110 ICM-129 ICM-ill TERM POINT NO.12 13 WIRE NO.12 13 VERIFY LIFTED WIRE TECH 1 TECH 2 EKT.CABLE NO 8898G-1 8898G-1 9082G-1 9083G-1 5.4.4 Verify MCC 1-EZC-D has been de-energized.
MAINT C&I Page 5 of 18 Rev.0 A
**1 THP 6030 IMP.305 For IMO-130 and IMO-153 located in 1-EZC-D, disconnect.
the following external wires: VALVE INO-130 TEM POINT NO.12 13 WIRE NO.12 13 VERIFY LIFTED WIRE TECH 1 TECH 2 EXT.CABLE NO 8624G-1 8624G-1 NNO-153 12 13 12 13 8931G-1 8931G-1 5.5 Connect wiring from the temporary control panel terminal points to MCC terminal points.Independently verify correct connections.
5.5.1 MCC 1-EZC-A Valve INO-140 To Breaker Verify Terminal'onnections Point Nos.TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Not.TECH 1 TECH 2 Temporary Control Panel Function 10 8A 13 12 9 10 Control Switch-"Low" s contact opening circuit.Control Switch-"High" contact opening circuit.Control Switch-"High" contact closing circuit.Control Switch-"Low" s contact closing circuit."Low" side of green ligh"I.ow" side of red light.Page 6 of 18 Rev.0
**1 THP 6030 IMP.305 Valve NMO-151 To Breaker Verify Terminal Connections Point Nos.TECH I TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH I TECH 2 Temporary Control Panel Function Control Switch-"Low";contact opening circuit Control Switch-"High" contact opening circuit 10 Control Switch-"High" contact closing circuit 8A Control Switch-"Low": contact closing circuit 13 12 10"Low" side of green ligI"Low" side of red light 5.5.2 MCC 1-EZC-B Valve IMO-120 To Breaker Verify Terminal Connections Point Nos.TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH I TECH 2 Temporary Control Panel Function Control Switch-"Low".contact opening circuit.Control Switch-"High" contact opening circuit.10 Control Switch-"High" contact closing circuit 8A Control Switch-"Low": contact closing circuit 13 12 10"Low" side of green ligl"Low" side of red light Page 7 of 18 Rev.0
**1 THP 6030 IMP.305 Valve IHO-128 To Breaker Terminal Point Nos.Verify Connections TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"Lovst>contact opening circuit.2, Control Switch-"High" contact opening circuit.10 Control Svitch-"High" contact closing circuit.8A Control Switch-"Lov" s contact closing circuit.13 12 10"Low" side of green lips"Lov" side of red light Valve IMO-152 To Breaker Verify Terminal" Connections Point Nos.TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"Low": contact opening circuit Control Switch-"High" contact opening circuit.10 Control Switch-"High" contact closing circuit.8A Control Svitch<<"Lov": contact closing circuit.13 12 10"Low" side of green ligl"Low" side of red light Page 8 of 18 Rev.0
**1 THP 6030 IMP.305 5..5.3 MCC 1-EZC-C Valve IMO-110 To Breaker Verify Terminal Connections Point Nos.TECH 1 TECH 2 From Temporary Control Pane Terminal Point Nos.I Verify Connections TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"Low" s contact opening circuit.Control Switch-"High" contact opening circuit.10 Control Switch-"High" contact closing circuit.8A Control Switch-"Low" s contact closing circuit.13 12 10"Low" side of green ligt"Low" side of red light.Valve ICM-129 To Breaker Veri fy Terminal Connections Point Non.TECH 1 TECH 2 From Temporary Control Pane Terminal Point Nos.I Verify Connections TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"I,ow" s contact opening circuit.10 Control Switch-"High" contact opening circuit., Control Switch-"High" contact closing circuit.8A Control Switch-"Low" s contact closing circuit.13 12 10"Low" side of green ligh"Low" side of red light.Page 9 of'8 Rev.0
**I THP 6030 IMP.305 Valve ICM-ill To Breaker Verify Terminal Connections point Nos.TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH 1 TECH 2 Temporary Control Panel Function Control Switch""Low"<contact opening circuit.Control Switch-"High" contact opening circuit.10 Control Switch-"High" contact closing circuit.SA Control Switch-"Low" x contact closing circuit.13 12 10"Low" side of green ligt"Low" side of red light.5.5.4 MCC 1-EZC-D Valve IMO-130 To Breaker Verify Terminal Connections Point Nos.TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"Low" s contact opening circuit.,2 Control Switch-"High" contact opening circuit.10 Control Switch-"High" contact closing circuit.SA Control Switch-"Low" s contact closing circuit.13 12 10"Low" side of green ligh"Low" side of red light.Page 10 of 18 Rev.0
**1 THP 6030 IMP.305 Valve NMO-153 To Breaker Terminal Point Nos.Verify Connections TECH 1 TECH 2 From Temporary Control Panel Verify Terminal Connections Point Nos.TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"Low" s contact opening circuit.Control Switch""High" contact opening circuit.10 Control Switch-"High" contact closing circuit.8A Control Switch-"Low" s contact closing circuit.13 12 10"Low" side of green ligh"Low" side of red light.5.6 The following external MCC wiring previously disconnected at the Breaker control wiring terminal points is to be spliced to wires from the temporary control panel: Page 11 of 18 Rev.0
*+1 THP 6030 IMP.305 5..6.1 MCC 1-EZC-A Valve IHO-140 Brekaer External Wiring To Be Spliced-Wire No.Spliced Wire Connections at the Temporary Control Panel-Terminal Point Nos.Verify Correct Wires Spliced TECH 1 TECH 2 Temporary Control Panel Function 4 (Previously dis-connected from Terminal No.6)Control Switch-"Higt side contact opening circuit 10 (previously dis-connected from Terminal No.2)Control Switch-"Low'ide contact opening circuit 3A (previously dis-connected from Terminal No.11)Control Switch-"Higt side contact closing circuit 7 (previously dis-connected from Terminal No.7)Control Switch-"Iow'ide contact closing circuit 2 (previously dis-connected from Terminal No.8)Indicating Lights-"High" side Page 12 of 18 Rev.0
**1 THP 6030 IMP.305 Valve NHO-151 Breaker External Wiring To Be Spliced-Wire&#xc3;o.4 (Previously dis-connected from Terminal No.6)Spliced Wire Connections at the Temporary Control Panel-Terminal Point Nos.Verify Correct Wires Spliced TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"High side contact opening circuit 10 (previously dis-connected from Terminal No.2)Control Switch<<"Low" side contact opening circuit 3A (previously dis-connected f rom Terminal No.11)Control Switch-"High side contact closing circuit 7 (previously dis-connected from Terminal No.7)Control Switch-"Low" side contact closing circuit 2 (previous,ly dis-connected from Terminal No.8)Indicating Lights-"High" side Page 13 of 18 Rev.0
**1 TIP 6030 IMP.305 5.6.2 MCC 1-EZC-B Valve IHO-120 Breaker External Wiring To Be Spliced-Wire No.4 (Previously dis-connected from Terminal No.6)Spliced Wire Connections at the Temporary Control Panel-Terminal Point Nos.Verify Correct Wires Spliced TECH 1 TECH 2 Temporary Control Panel Function Control Switch-"Higt side contact opening circuit 10 (previously dis" connected from Terminal No.2)Control Switch-"Iow'ide contact opening circuit 3A (previously dis-connected from Terminal No.11)Control Switch-"Higl side contact closing circuit 7 (previously dis-connected from Terminal No.7)Control Switch-"Low'ide contact closing circuit 2 (previously dis-connected from Terminal No.8)Indicating Lights-"High" side Page 14 of 18 Rev.0
**1 THP 6030 IMP.305 Valve INO-128 Breaker External Wiring To Be Spliced-Wire No.Spliced Wire Connections at the Temporary Control Panel-Terminal Point Nos.Verify Correct Wires Spliced Temporary Control'ECH l TECH 2 Panel Function 4 (Previously dis-connected from Terminal No.6)Control Switch-"High side contact opening circuit 10 (previous ly dis-connected from Terminal No.2)Control Switch-"Low" side contact opening circuit 3A (previously dis-connected from Terminal No.11)Control Switch-"Higb side contact closing circuit 7 (previously dis-connected from Terminal No.7)Control Switch-"Low" side contact closing circuit 2 (previously dis-connected from Terminal No.8)Indicating Lights-"High" side Page 15 of 18 Rev.0
**1 THP 6030 IMP.305 Valve NNO-152 Breaker External Wiring To Be Spliced-Wire No.4 (Previously dis-connected from Terminal No.6)Spliced Wire Connections at the Temporary Control Panel-Terminal Point Nos.Verify Correct Wires Spliced TECH I TECH 2 Temporary Control Panel Function Control Switch-"High side contact opening circuit 10 (previously dis-connected from Terminal No.2)Control Switch-"Low" side contact opening circuit 3A (previously dis-connected f rom Terminal No.11)Control Switch-'High side contact closing circuit 7 (previously dis-connected from Terminal No.7)Control Switch-"Low" side contact closing circuit 2 (previously dis-connected from Terminal No.8)Indicating I.ights-"High" side Page 16 of 18 Rev.0
**1 THP 6030 ZNP.305 5.6.3 MCC 1-EZC-D Valve IMO-130 Breaker External Wiring To Be Spliced-Wire No.Spliced Wire Connections at the Temporary Control Panel-Terminal Point Nos.Verify Correct Wires Spliced TECH l TECH 2 Temporary Control Panel Function 4 (Previously dis-connected from Terminal No.6)Control Switch-"High side contact opening circuit 10 (previously dis-connected from Terminal No.2)Control Switch-"Low" side contact opening circuit 3A (previously dis-connected from Terminal No.11)Control Switch-"High side contact closing circuit 7 (previously dis-connected from Terminal No.7)Control Switch-"I.ow" side contact closing circuit 2 (previously dis-connected from Terminal No.8)Indicating Lights-"High" side Page 17 of 18 Rev.0  
**1 THP 6030 IMP.305 Valve NMO-153 Breaker External Wiring To Be Spliced-Wire No.Spliced Wire Connections at the Temporary Control Panel-Terminal, Point Nos.Verify Correct Wires Spliced TECH 1 TECH 2 Temporary Control Panel Function 4 (Previously dis-connected from Terainal No.6)Control Switch-"High'ide contact opening circuit 10 (previously dis-connected from Terminal No.2)Control Switch-"Low" side contact opening circuit 3k.(previously dis-connected from Terminal No.11)7 (previously dis-connected from Terminal No.7)Control Switch-"High'ide contact closing circuit Control Switch-"Low" side contact closing circuit 2 (previously dis-connected from Terainal No.8)Indicating Lights-"High" side 6.0 When Ooerations has operated a valve by use of the temporary control panel, its MCC may be de-energized.


===6.1 After===
                                                    **1  THP 6030 IMP ~ 305 1..2.7        This post-fire repair procedure is intended to provide the plant operators with an alternative method of aligning the following inside-containment motor-operated valves from their associated motor control centers located in the engineered safety system and MCC Room at elevation 609 Ft. in the Auxiliary Building:
verification-of de-energization, the temporary control panel is disconnected from the compartment.
Valve No. Containment Valve Descri tion                  MCC IMO-110      Accumulator Isolation Valve                  1-EZC-C IMO-120      Accumulator Isolation Valve                  1-EZC-B IMO-130      Accumulator Isolation Valve                  1-EZC-D IMO-140      Accumulator Isolation Valve                  1-EZC-A IMO-128      RHR Inlet Isolation Valve                    1-EZC-B ICM-129      RHR Inlet Isolation Valve                    1-EZC-C NMO-151      Pressurizer PORV Block Valve                1-EZC-A NMO-152      Pressurizer PORV Block Valve                1-EZC-B NMO-153      Pressurizer PORV Block Valve                1-EZC-D ICM-ill      RHR Outlet Isolation Valve                  l<<EZC-C 1.2.8        This procedure is referenced in and should be used to supplement 12 OHP 4023.100.001, "Unit fl  Emergency Remote Shutdown" procedure.
6.2 The temporary control panel may now be connected into another compartment after it has been de-energized.
1.3 ASSUMPTIONS 1.3.1       A  loss of  total plant off-site    power  for 72 hours.
6.3 The above sequence, steps 6.1 and 6.2, is repeated until all valves required to be operated have been operated.6.4 Removal of the temporary control panel's wiring from the compartment does not require verification.
1.3.2       A    fire in any one  of the following plant areas:
(a)  Control Room,  or (b)  Control Room  Cable  Vault, or (c) Auxiliary Cable Vault, or (d) Switchgear Room Cable Vault NOTE:        As indicated in the "Objective" section of this procedure, the primary concern is loss of control from thc Control Room. However, not the    intent of  this  procedure  to limit it is Control Room usc. This procedure may be used for any fire which occurs outside of the, fire areas containing the valves, motor control centers, electrical penetrations and valve cables (routed from a motor control center to a valve) as specified by this procedure.
Page  2  of  18 Rev  0


==7.0 Restoration==
                                                **1 THP 6030 IMP ~ 305 2~0 REFERENCES
: 2. 1 10 CFR 50, Appendix R, Section    III L.
2.2  PMI-2270,  Fire Protection.
: 2. 3 PMI-2140, Temporary Modifications.
2.4  AEPSC  Plant Drawings 1-97331, 1-97332, 1-1316, 1-1315.
2.5  ~*12 OHP 4023.100.001, Unit 41 Emergency Remote Shutdown.
2.6  ~*1 MHP 2140.082.005, Maintenance Procedure      for Repowering Containmcnt Valves.
3.0 PRECAUTIONS 3.1  When  routing temporary cables, do not obstruct walkways.
Cables  shall be routed off to the side or overhead when possible.
3.2  Though the    circuits being worked on are de-cncrgizcd, other circuits in close proximity may have voltages present; observe all electrical safety precautions while working on or near energized equipment.
3.3  Ensure  that  all connections are clean and  tight.
3.4  It is'ssumed that the equipment required by this procedure is available. Additionally, usc of equipment required from thc opposite (unaffected) unit should not impair safe continued operation or shutdown of that unit.
4.0 PREREQUISITES 4.1  This proccdurc is to interface with Maintenance Department procedure **1 MHP 2140.082.005, "Maintenance Procedure for Rcpowering Containmcnt Valves", which is the controlling procedure for containmcnt valve repair.
4.2  Striped-tag clearances must bc transferred to C&I from Maintenance Department prior to working on valve motor controls or associated circuitry.
4.2.1      When the temporary valve control panel has been connected, Operations is to be informed that  power may be turned on and the valve may be operated.
Page 3 of  18 Rev 0


===7.1 Restoration===
                                                        **1 THP 6030 IMP ~ 305 4.3  Verify that all terminals are de-energized prior to lifting or  landing wires.
of Containment valves will be documented by job orders which restore the valves to their normal operational status, after mitigation of the fire.7~2 REVIEWED BY DATE Page 18 of 18 Rev.0
5~0  CONTAINMENT VALVE REPAIR PROCEDURE 5.1   Coordinate with Maintenance Department to determine which MCC has been de-energized and which motor starters will be  modified.
**1 THP 6030 IMP.30S APPENDIX A CONTAINMEKT VALVES REPAIR PROCEDURE SIRES TO NE DISCON ECTED AT KC 1-EZC-C I WIRE NO.CABLE NO.I(COIOR CODE)TERMINAL POINT NQ, 9302G-1 3A(W)3(BK)3A ll 930 1G-1 4(BK)5(W)10(GN)8(R)4 5 10 3 I I 8319PG-1 I I I I I I I I I I I I I I I I 8898G-1 I 2(BL)I 3A(RYL)I 4(BK)I 7(BKYL)I 10(YL)I I I I I 2(BI.)3(RYL)4(BK)5(GNBK)6(GNYL)7(BKYL)8(RBK)9(RGN)10(YL)12(GY)13(GN)8 3h 6 7 2 8 11 6 5 10 7 3 8A 2 12 13 WIRES 2, 3A, 4, 7, AND 10 CONTAINED IN CABLE 8319PG-1 MUST BE DIS-CONNECTED AND THEN SPLICED TO h NEW WIRE FOR CONNECTION TO THE TEMPORARY CONTROL PANEI AT TERMINAL POINTS ll, 5, 1, 7 AND 4 RESPECTIVELY.
: 5. 1.1    Motor Starters may be modified in any order required, providing the MCC feeding the starters has been de-energized.
I I I I I I I I~I I WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO-110 Page 1 of 31 Rev.0
5.1.2     Any number, or all, valve motor starters in an MCC may be modified as deemed necessary.
**1 THP 6030 IMP.305 APPENDIX A TERR]eh'~Cv 7ZRH le 5'tRK HO, PO(+T NO.lO 3A 31 l3 I IL sZ, 8<k'1L K ia N O'4'f L t30 Z.6-l 9 0/&I 83i9PC-j g8)RG-j WIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE IMO-110 Page 2 of 31 Rev.0
          ,5  1 3    Verification of lifted wire signatures will document which motor starters are modified.
**1 TEP 6030 IMP.305 APPENDIX A TERMI~At ScOCK TfR&#xc3;ie'h P'OlNT hlO.wiR eD, wP 7R c ZND.AN 7 g,MPO RARy gumtCRS TERYI rAL pO I e r 784WJ hlAL, Po]HT'o 4i)>gf Alo.S pL<cE (gyp>cA~)/0 WIRING TO BE CONNECTED VALVE IMO-110 S ZieeC-~Page 3 of 31 Rev.0
5.2  Verify that  a  clearance has been taken on the MCC feeding the  selected    motor starters, and that the associated circuit breaker is open.
**1 THP 6030 IMP.305 APPENDIX A TSRH ical.Sc CK 7 jPHjNA FO]mT NO.0'/RE NO.iO/3 PA 8c KYL.K 9302'g1 PL 93OI R-I 80 8+PR-l 887o R-]WIRING TO BE DISCONNECTED AT MCC 1-EZC-B VATVE IMO-120 Page 5 of 31 Rev.0 7 fgwiNAL.BcOC,<**1 THP 6030 IMP.305 APPENDIX A~RWiuri PO>NT h/0.Nil HO.MP 7R c END.Ah/'7g~po mR Y g~~PCR-TERRI N4L POs N7-TERrqi~SL, Po(~T No U)(Rf No./O Ry~6 Sr~icE (TYPICAL)t/0 WIRING TO BE CONNECTED VALVE IMO-120 508+PE-I Page 6 of Ql Rev.0  
5.3  Open the Breaker compartment front door.
CAUTION:  Verify that all terminals are de-energized prior to lifting or landing wires.
5.4  Lift the  external wires listed, from their associated terminal pornts. This will disconnect the "low side" of the red and green indicating lights on panel "SIS'r RHR". Independently verify      lifted  leads.
5.4.1      Verify MCC     1-EZC-A has been de-energized.
MAINT~
CSI'or IMO-140 and/or NMO-151      located in l-EZC-A, disconnect the following        external  wires:
MCC-1EZC-S TERM POINT    WIRE            VERIFY LIFTED WIRE VALVE    NO.           NO.       TECH 1              TECH 2        EXT. CABLE NO IMO-140        12        12                                                9102R-1 13        13                                                9102R-1 NMO-151        12        12                                                8676R-1 13        13                                                8676R-1 Page 4  of 18 Rev. 0


**1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO bE DISCONNECTED AT MCC 1-EZC-D CABLE NO.l WIRE NO.(COLOR CODE)TERMINAL POINT NO.93046-1 93036-1 3A(W)3(BK)4(BZ)5(w)10(GN)8(R)3A ll l I I I l 8293PG-1 I 2(Bl.)I 3A(RYL)4(BK)I 7(BKYL)I 10(YL)I I I l I I 8 3A 6 7 2 WIRES 2, 3A, 4, 7, AND 10 CONTAINED IN CABLE l 8293PG-1 MUST BE DIS-I CONNECTED AND THEN l I SPLICED TO A NEW WIRE I FOR CONNECTION TO THE I TEMPORARY CONTROl, I PANEL AT TERMINAL I POINTS 1 1, 5, 1, 7 I AND 4 RESPECTIVELY.
                                                *~I THP 6030 1M'05 5;4.2   Verify MCC   1-EZC-B has been    de-energized.
86246-1 I 2(BL)I 3(RYL)l 4(BK)I 5(GNBK)l 6(GNYL)l 7(BKYL)I 8(RBK)l 9(RGN)10(YL)12(GY)13(GN)I 8 I ll I l 6 I I 5 I I 10 I I 7 I I 3 I i 8h I l 2 I I 12 I l 13 I I I l I I I l l I I WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO<<130 Page 7 of 31 Rev.0
MAINT~
**1 THP 6030 Xm.305 APPENDIX h TgRH iuAL.8~t'x TERHlMfl O'IRK HO.p0]NT NO.IO i3 I NYL.BK k'lL.K N5't304G 1 0 6-I 8 P.93P&Z+G MIRING TO BE DISCONNECTED AT NCC 1-EZC-D VALVE IMO-130 Page 8 of 3$Rev.0 TQRMl ruAl SLOCK**1 THP 6030 IMP.305 APPENDIX A TfRgi Nh PolM NO.veil eo.wP R e ZNb.AN TERRI NAL FO>N7-7c~eoMRV Kvl&f E.P'ECHiNR<PoiNT No CA)sgf No./o S~ucE t7veica~)/0 8~'t3 P&-/VALVE IMO-130 Page 9 of 31 Rev.0
C&I For IM0-120, IMO-128 and NMO-152 located in l-EZC-B, disconnect the following external wires:
**1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED AT MCC 1-EZC-h I WIRE NO~CABfE NO.I(COLOR CODE)TERMI NAf POINT NO.9304R-1 9303R-1 3A(W)3(BK)BK 5(W)10(GN)8(R)3A ll 8471PR-1 9102R-1 I 2(BL)I 3A(RYL)I 4(BK)I 7(BKYL)I 10(YI.)I I I I I 2 (Br.)3 (RYr.)4(BK)5(GNBK)6(GNYL)7(BKYI.)8(RBK)9(RGN)10(YL)12 (GY)13(GN)8 3A 6 2 8 11.6 5 10 7 I 3 I 8A I 2~I I.13 I WIRES 2, 3A, 4, 7g AND 10 CONTAINED IN CABLE 8471PR-1 NJST BE DIS-CONNECTED AND THEN SPLICED TO A NEW WIRE FOR CONNECTION TO THE TEMPORARY CONTROf PANEL AT TERMINAL POINTS ll, 5, 1, 7 AND 4 RESPECTIVELY.
TERM POINT  WIRE          VERIFY LIFTED WIRE VALVE  NO.           NO. TECH  1              TECH 2         EXT. CABLE NO IMO-120      12      12                                            8870R-1 13       13                                            8870R-1 IMO-128                                                               8871R-1 NMO-152      12        12                                            8677R-1 13        13                                            8677R-1 5.4.3   Verify MCC 1-EZC-C has been      de-energized.
WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO-140 Page 10 of 31 Rev.0
MAINT, C&I For IMO-110, ICM-129 and ICM-ill located in l-EZC-C, disconnect the following external wires:
**1 THP 6030 IMP.305 APPENDIX A TsRet~~a Bt.Cx 7 j'PH)MA PO>e7 NO.%AIRE HO.'0/3 8A 8<4'fL K+7IPR-I 0soZ.a-i WIRING TO BE DISCONNECTED AT MCC 1-EZC-A VALVE IMO-140 Page 11 of 31 Rev.0 TERN 1 NWL BtOCK~gg INI WIAK Po)NT bio.HO.**1 THP 6030 IMP.305 APPENDIX A MP yR t." ZN7).Ah/L Tr~Pe RARV 3 v,mf'c p-7ERr<iKAL, Point'o 4))gf'lo.TERRI NAL F p]e7-/o 8a,~P~'cK (<ASPIC~()
TERM POINT  WIRE          VERIFY LIFTED WIRE VALVE  NO.           NO. TECH 1               TECH 2       EKT. CABLE NO IMO-110      12        12                                            8898G-1 13       13                                             8898G-1 ICM-129                                                              9082G-1 ICM-ill                                                              9083G-1 5.4.4    Verify MCC 1-EZC-D has been    de-energized.
/0 bky Va, WIRING TO BE CONNECTED VALVE IMO-140 8+7I PR-I Page 12 of 31 Rev.0
MAINT C&I Page 5  of 18 Rev. 0
**1 THP 6030 IMP 305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE I WIRES TO BE DISCONNECTED AT MCC 1-EZC-B CABLE NO.I WIRE NO.(COLOR CODE)TERMINAL POINT NO.2(BI.)(RYL)I 3 8087PR-1 I 4 (BK)I 7(BKYL)I 10(YL)I I I I 8 11 6 7 WIRES 3, 4p 7 AND 10 CONTAINED IN CABLE 8087PR-1 MUST BE DIS-CONNECTED AND THEN SPLICED TO A NEW WIRE I FOR CONNECTION TO I THE TEMPORARY CONTROL I PANEL AT TERMINAL POINTS 5, 1, 7 AND 4 RESPECT IVEI Y.I I I I I I I 8871R-1 I I I I 2(BL)3(RYL)4(BK)5(GNBK)6(GNYL)7(BKYL)8(RBK)9(RGN)10(YL)11(GN)8 11 6 5 10 7 3 8A 2 1 WIRING-.ABULATION FOR RHR INLET ISOLATION VALVE IMO-128 WIRING TABULATION FOR RHR INLET ISOLATION VALVE IMO-128 Page 13 of 31 Rev.0
++1 THP 6030 IMP.305 APPENDIX A TERY]ohl.8~CX TCRHiuA W'IRf Ho.PIN)NT No.CoLoR RWa b SNVL RSN 7 8K'K 5'B K/0.YL SoS eR;I 871 MIRING TO BE DISCONNECTED AT MCC 1-EZC-B VALVE IMO-128 Page 14 of 31 Rev.0
)-KC-7pRMiwAt BCOC,W**1 THP 6030 IMP.305 APPENDIX A TZRwi NA Po)W NO.WiCK Nd.AN Ta~pe RARV~v v,p~v TERYl NAL POI NT 7f RHiNAK, Po~~T'io CA)s~No.'SpLiCE t7yp>CN)/0 WIRING TO BE CONNECTED VALVE IMO-128 8087PR;I Page 15 of 31 Rev.0
**1 THP 6030 IMP-305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED t AT MCC 1-EZC-C I I WIRE NO.CABLE NO.l(COLOR CODE)TERMINAL POINT&#xc3;O.REMARKS 9190PQ-1 2(BL)3(RYL)4(BK)7(BKYL)10(YL)8 11 6 7 2 WIRES 3, 4~7 AND 10 CONTAINED IN CABLE 9190PG-1 NJST BE DIS-CONNECTED AND THEN SPLICED TO A NEW WIRE POR CONNECTION TO THE TEMPORARY CONTROL PANEL AT TERMINAL POINTS 5, 1, 7, AND 4 RESPECTIVELY.
9082G-1 2(BL)3(RYI.)4(BK)5(GNBK)6(GNYL)I 7(BKYL)I 8(RBK)I 9(RGN)j 10(YL)I 11(GN)I 8 ll 6 5 10 7 3 8A 2 1 MIRING TABULATION FOR RHR INLET ISOLATION VALVE ICM-129 Page 16 of 31 Rev.0
+*1 THP 6030 IMP 305'APPENDIX A.TKRWiuA SlRE Ho.PO]+7 No.COc.dR RGM SL'7 SKVL 8x/0.VL 9(fopt-I WIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE ICM-129 Page 17 of 31 Rev.0
**1 THP 6030 I P 305 APPENDIX A Tf Rpi Mh WE'RE&pic QO.HO, IO AN Ta~~~~v.3 V&fKW 7'ERR t NAL PO I N 7 7ERHiHAL, Point No u))&la.RYl.SPLtCE (TvPICIL)/0 WIRING To BE CONNECT VALVE ICN-129)~/OPAL I Page 18 of 31 Rev.0
~~I**1 THP 6030 IMP-305 APPENDIX A CONTAINM1 NT VALVES REPAIR PROCEDURE I WIRES TO bE DISCONNECTED AT MCC 1-EZC-A I WIRE NO.CABLE NO.I(COLOR CODE)I TERMINAL POINT NO.8750PR-1 I 2(BL)I 3(RYL)4(BK)I 7(BKYL)I 10(YL)I I I I I I 8 ll 6 7 2 WIRES 2, 3, 4, 7 AND 10 CONTAINED IN CABLE 8750PR-1 MUST BE DIS-CONNECTED AND THEN SPLICED TO A NEW WIRE POR CONNECTION TO THE I TEMPORARY CONTROL PANEL AT TERMINAL I POINTS ll, 5, 1, 7 I AND 4 RESPECTIVELY.
I I 2(BL)I I 3(RYL)I I 4(BK)I I 5(GNBK)I I 6(GNYL)I 8676R-1 I 7 (BKYL)I I 8(RBK)I I 9(RGN)I I 10(YL)I I 12(GY)I 13(GN)I 8 ll 6 5 10 7 3 8A 2 12 13 I I I I I I I I WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-151 Page 19 of 31 Rev.0
**1 THP 6030 IMP.305 APPENDIX A 7ERhf!Algal.
8L.CK TERH~uA WIRE hto.Peiev'o.COLOR l3 I GQ I Z.I 7 RYa b GNARL'3 RGN SC 7 8K''BK RBK so.V'L.-OPR-I R-I WIRING TO BE DISCONNECTED AT MCC 1-EZC-A VALVE NMO-151 Page 20 of 31 Rev.0 y.pRMi rvha S~Ot K Tf Rgi NA WICK PoiM NO.HO,**1 THP 6030 IMP.305 APPENDIX A MP ra c ZMD, Ahl TKxPo RORY: Qv mar.W 7'ERYI NAL,'O]N7-7ERW~XA<u)iaE PotuT'o Alp.7 7/0 RVc.8 Ky Va~PL'CE (~V PICf}L)WIRING TO BE CONNECTED VALVE NMO-151 8750 PR-)Page 21 of 31 Rev.0
**1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED I AT MCC 1-EZC-B I I WIRE NO.CABLE NO.I(COLOR CODE)TERMINAl POINT NO.8753PR-1 I I I I I I I 8677R-1 I I I I I I 2(BL)3(RYL)i(BX)7(BKYL)10(YL)I 2(BL)I 3(RYL)I 4(BK)I'(GNBK)I 6(GNYL)I 7(BKYL)I a(RBK)I 9(RGN)I 10(YL)I 12 (GY)I 13(GN)I 8 I 11 I 6 2 8 ll 6 5 10 7 3 Bh 2 12 13 I WIRES 2, 3, i, 7 AND 10 CONTAINED IN CABLE I 8750PR-1 MUST BE DIS-I CONNECTED AND THEN SPLICED TO h NEW WIRE I FOR CONNECTlQN TO THE I TEMPORARY CONTROL PANEL AT TERMINAL POINTS ll, 5, 1, 7 AND 4 RESPECTIVElY.
WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-152 Page 22 of 31 Rev.0  


**1 THP 6030 IMP-305 APPENDIX A TER'H]eAI 8~CK TZPWiuA w'ARE Ho.POtN7 No.g COLOR l3 IlQ iZ iP t'0 3 RSC b<NIAL 9 RtN Gl.'7 ALKYL Bv 5'BK 10.YL 87BF a-9C77R-WIRING TO BE DISCONNECTED AT MCC 1-EZC-B VALVE NMO-152 Page 23 of 31 Rev.0 7$R<f NAt S~Ot'l4**1 THP 6030 IMP.305 APPENDIX A rfRpiul Po(W No.wikK ND.Tc~poMRV Tv~i E.A TERPfl NAL pOi+7-7ECHivAL, u)iaE Boiler ko No.Bt.SPalcE (+YPICAL)/0 WIRING TO BE CONNECTED VALVE NMO-152 Page 24 of 31 Rev.0  
A
**1 THP 6030 IMP.305 APPENDIX A CONTAIN%.'NT VALVES REPAIR PROCEDURE I WIRES TO BE DISCONNECTED AT MCC 1-EZC-D I WIRE NO.CABLE NO.l(COLOR CODE)TERMINAL POINT NO.8764PG-1 I I I I I I I 8931G-1 I l I I I I 2(Bt.)3(RYL)4(BK)7.(BKYI)10(YL)I 2(BL)I 3(RYt)I 4(BK)I 5(GNBK)I 6(GNYL)I 7(BKYL)I 8(RBK)I 9(RGN)I 10(YL)I 12(GY)I 13(GN)I 8 11 6 7 2 8 ll 6 5 10 7 3 8A 2 12 13 WIRES 2, 3, 4, 7 AND 10 CONTAINED IN CABLE 8764PG-1 MUST BE DIS-CONNECTED AND THEN SPLICED TO h NEW WIRE FOR CONNECTION TO THE TEMPORARY CONTROl PANEL AT TERMINAL I POINTS ll, 5, 1, 7 I AND 4 RESPECTIVELY.
                                                            **1 THP 6030     IMP.305 For IMO-130 and IMO-153 located in 1-EZC-D, disconnect. the following external wires:
WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-153 gage 25 of 31 4ev.0  
TEM POINT        WIRE            VERIFY LIFTED WIRE VALVE      NO.                NO.       TECH 1              TECH 2            EXT. CABLE  NO INO-130          12            12                                                  8624G-1 13            13                                                  8624G-1 NNO-153          12            12                                                  8931G-1 13            13                                                  8931G-1 5.5    Connect    wiring from the temporary control panel terminal points to MCC terminal points. Independently verify correct connections.
*a1 THP 6030 IMP 305 APPENDIX A TSRPf>eht 8~CK TZRX>uA F'OINT IVO.13/'7 8KYL NBK 87CHP'&I WIRING TO BE DISCONNECTED AT MCC 1-EZC-D VAT VE NMO-153 Page 26 of 31 Rev.0
5.5.1          MCC  1-EZC-A Valve INO-140 From Temporary To  Breaker            Verify      Control Panel      Verify Terminal        'onnections        Terminal        Connections    Temporary Control Point Nos. TECH  1  TECH 2    Point Not. TECH 1  TECH 2      Panel Function Control Switch - "Low" s contact opening circuit.
~R~i NJSL Boot.'K**1 THP 6p3p Z~305 APPENDIX A Tf RHi MA PowT NO.wMK hid.eP ra e END.r4u TKxPe RARY~Ze~e~a TERHt NIL PO]NF TERmiNAL u)>Pot~7 Mo No.7 7/0 Ba Ayg.+f'L>CE (<yp>CW).WIRING TO BE CONNECTED VALVE NMO-153 Page 27 of 31 Rev.0
Control Switch - "High" contact opening circuit.
~~0~~~~~~~~~$~~
10                                                              Control Switch - "High" contact closing circuit.
**1 THP 6030 IMP.305 APPENDIX A TER'MI ehL.TE'RHlwA VIRK HO.RliNr arp.CO~OR I I GN Rsa b GMYL 8A 9 RGN 8L'7 8KYL xo.VL.9i81PG-I 9o83$-I MIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE ICM-ill Page 29 of 31 Rev.0 i<I I-R 7f R+fNAL BLOC 4 7f Rg)hll PotM NO.**1 THP 6030 MP.305 APPENDIX A Aht e ZHD.Pg~PO RARy.QQ~f~P~7'ERR I NAL POINT 7EWWIHAL, t'ai Poi~T No bio.7 7/0 R.yg'pl.iCE tTYPIChL)WIRING TO BE CONNECTED VALVE ICM-ill q>81PG-J Page 30 of 31 Rev.0 pcs, rz~nrwav roar N>.(~sr>chic) hali'ac pro.(re~~<)IZ,"-PI**1 THP 6030 IMP.305 APPENDIX A I I/Z.5 I I I I I I I I Z~l~~~~~~~~~~~~~el Q~rgoL, Ski T~r~<Pog,hay Chary 4~0 Tee]cgriiu Auc aw 34/0 8A 0 Ops'-C orat-'~r S~/re&PJi 7>!Pair!.8 r!fl)CO<~<>errKT hler.~gtvcH POS<r~o<az6a Cc.aS F CozrhC.7 FuwCrioal I-I t-2.X 3 HI-+X, sH l-0 7~l-8"jjI')6H" Sl OC gag C>RCulT 1%LogJ+5/OE.()pp~g~Cite.vf1'glypt" SiOC CiRCQt7 5I elf i T)C-DKNaTf5"oeTAc,T cLosfD TEMPORARY CONTROL ARD INDICATION PANEL TYPICAL WIRING AND SWITCH DEVELOPMENT Page 31 of 31 Rev.0 q~~a i., e r J I I f f I'(
8A                                                                Control Switch - "Low" s contact closing circuit.
EPP Appendix B LIST OF EFFECTIVE PAGES 1 of 6 2of6 3of6 4of6 5of6 6 of Attachm 1, Page Attachmeh2 2, Page Page Attachment 3, Page 1 of 1 1 of2 20f2 1 of2 Page 2 of 2 A hment 4, Page Page l Page Page 1 of 4 2of4 3 of 4 4 of 4 ttachment 5, Page 1 of Revision Number and Dat Revision 4-12/15/2 Revision 4-1/15/82 Revision 4-12/15/82 Revisi 4-12/15/82 Re sion 4-12/15/82 evision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 Revision 4-12/15/82 DEC 17 1982 Page 1 of 1 Memorial Hospital Agreement Revision 4 EPP Appendix B INDIANA AND MICHIGAN ELECTRIC COMPANY DONALD C.COOK NUCLEAR PLANT HOSPITAL ASSISTANCE PLAN GENERAL All Company safety policies and procedures applicable to conventional generating plant operations apply to the Donald C.Cook Nuclear Plant.In addition, special rules and procedures govern work involving radio-active material.Although measures have been taken to control radio-active contamination, its presence will require the implementation of special procedures governing the treatment of a person injured in a contaminated area.First, the person must be decontaminated unless the nature and/or extent of the injury makes immediate removal from the area and treatment necessary or requires treatment in the area.Second, if a wound is involved, it may become contaminated with radio-active material and complete decontamination may not be possible with-out aggravating the injury.All D.C.Cook Plant Operating Department personnel, appropriate tech-nicians and the staff have a working knowledge of decontamination pro-cedures and all Shift Operating Engineers, Chemical and Radiation Pro-tection Supervisors and Chemical and Radiation Protection Technicians have completed courses of instruction in First Aid.Normally one or more of these employees will be available to administer fi rst aid while decontamination procedures are completed.
13                                    9                          "Low" side  of green ligh 12                                  10                          "I.ow" side  of red light.
In the event the injury endagers life or limb, immediate medical treat-ment shall always precede decontamination procedures'onsequently, provisions have been made for contamination control at Memorial Hospial in St.Joseph and Mercy Hospital in Benton Harbor.In cooperation with Indiana&Michigan Electric Company, the partici-pating hospitals will have a staff of physicians and hospital personnel trained to implement the proper methods of contamination control.Indiana&Michigan Electric Company will ensure that training courses are conducted to provide hospital personnel with basic knowledge of radiation and contamination, as well as control methods.Annual con-ferences and refresher classes will be conducted.
Page 6  of 18 Rev. 0
Also eriodic tests runs to ensure the o erabilit of the Hos ital Assistance P an w>1 Indiana&Michigan Electric Company will ensure the following contami-nation control supplies will be furnished to the hospitals:
 
1.Disposable Gowns 2.Surgical Gloves 3.Surgeon Caps 24 pair 24 pair 12 Page 1 of 6 Memorial Hospital Agreement Revision 4'}}
                                                        **1 THP 6030 IMP.305 Valve NMO-151 From Temporary To  Breaker        Verify      Control Panel    Verify Terminal        Connections    Terminal      Connections    Temporary Control Point Nos. TECH  I  TECH 2    Point Nos. TECH I TECH    2      Panel Function Control Switch - "Low";
contact opening circuit Control Switch - "High" contact opening circuit 10                                                          Control Switch - "High" contact closing circuit 8A                                                          Control Switch - "Low":
contact closing circuit 13                                                          "Low" side  of green ligI 12                              10                        "Low" side  of red light
: 5. 5.2        MCC 1-EZC-B Valve IMO-120 From Temporary To  Breaker        Verify      Control Panel    Verify Terminal        Connections    Terminal      Connections    Temporary Control Point Nos. TECH  1   TECH 2    Point Nos. TECH I TECH    2      Panel Function Control Switch - "Low" .
contact opening circuit.
Control Switch - "High" contact opening circuit.
10                                                         Control Switch - "High" contact closing circuit 8A                                                          Control Switch - "Low":
contact closing circuit 13                                                          "Low" side  of  green  ligl 12                              10                        "Low" side  of red  light Page 7    of  18 Rev. 0
 
                                                      **1 THP 6030 IMP.305 Valve IHO-128 From Temporary To  Breaker        Verify  Control Panel      Verify Terminal        Connections  Terminal        Connections    Temporary Control Point Nos. TECH 1    TECH 2 Point Nos. TECH 1  TECH 2      Panel Function Control Switch - "Lovst  >
contact opening circuit.
2,                        Control Switch - "High" contact opening circuit.
10                                                         Control Svitch - "High" contact closing circuit.
8A                                                        Control Switch - "Lov" s contact closing circuit.
13                                                        "Low" side of green lips 12                             10                         "Lov" side of red  light Valve IMO-152 From Temporary To  Breaker    "
Verify  Control Panel      Verify Terminal        Connections  Terminal        Connections    Temporary Control Point Nos. TECH  1  TECH 2 Point Nos. TECH 1    TECH  2     Panel Function Control Switch - "Low":
contact opening circuit Control Switch - "High" contact opening circuit.
10                                                       Control Switch - "High" contact closing circuit.
8A                                                        Control Svitch << "Lov":
contact closing circuit.
13                                                        "Low" side of green  ligl 12                            10                          "Low" side  of red light Page 8  of  18 Rev. 0
 
                                                          **1 THP 6030   IMP.305 5.. 5.3        MCC 1-EZC-C Valve IMO-110 From Temporary To Breaker          Verify      Control Pane I      Verify Terminal        Connections      Terminal        Connections    Temporary Control Point Nos. TECH  1  TECH 2    Point Nos. TECH 1   TECH 2      Panel Function Control Switch  "Low" s contact opening circuit.
Control Switch - "High" contact opening circuit.
10                                                            Control Switch - "High" contact closing circuit.
8A                                                            Control Switch - "Low" s contact closing circuit.
13                                                            "Low" side of  green ligt 12                                10                          "Low" side of red light.
Valve ICM-129 From Temporary To Breaker          Veri fy      Control Pane I      Verify Terminal        Connections      Terminal        Connections    Temporary Control Point Non. TECH  1  TECH 2    Point Nos. TECH 1  TECH 2      Panel Function Control Switch - "I,ow" s contact opening circuit.
Control Switch  "High" contact opening circuit.,
10                                                            Control Switch - "High" contact closing circuit.
8A                                                            Control Switch - "Low" s contact closing circuit.
13                                                            "Low" side of green ligh 12                                10                          "Low" side of red light.
Page 9 of'8 Rev. 0
 
                                                        **I THP  6030 IMP.305 Valve ICM-ill From Temporary To  Breaker        Verify      Control Panel      Verify Terminal      Connections    Terminal        Connections    Temporary Control point Nos. TECH 1  TECH 2    Point  Nos. TECH 1  TECH 2    Panel Function Control Switch " "Low"  <
contact opening circuit.
Control Switch - "High" contact opening circuit.
10                                                        Control Switch - "High" contact closing circuit.
SA                                                        Control Switch - "Low" x contact closing circuit.
13                                                        "Low" side of green  ligt 12                              10                        "Low" side of red  light.
5.5.4        MCC 1-EZC-D Valve IMO-130 From Temporary To  Breaker        Verify      Control Panel      Verify Terminal      Connections    Terminal        Connections    Temporary Control Point Nos. TECH 1  TECH 2    Point Nos. TECH 1  TECH 2    Panel Function Control Switch - "Low" s contact opening circuit.
                                  ,2                        Control Switch - "High" contact opening circuit.
10                                                        Control Switch - "High" contact closing circuit.
SA                                                        Control Switch - "Low" s contact closing circuit.
13                                                        "Low" side of green  ligh 12                            10                          "Low" side of red light.
Page 10  of 18 Rev. 0
 
                                                      **1 THP 6030   IMP.305 Valve NMO-153 From Temporary To  Breaker        Verify  Control Panel      Verify Terminal        Connections  Terminal        Connections    Temporary Control Point Nos. TECH  1  TECH 2 Point Nos. TECH 1  TECH 2      Panel Function Control Switch - "Low" s contact opening circuit.
Control Switch " "High" contact opening circuit.
10                                                        Control Switch - "High" contact closing circuit.
8A                                                        Control Switch - "Low" s contact closing circuit.
13                                                        "Low" side of green ligh 12                          10                          "Low" side of red light.
5.6  The  following external  MCC  wiring previously disconnected at the Breaker control wiring terminal points is to be spliced to wires from the temporary control panel:
Page 11  of  18 Rev. 0
 
                                                      *+1 THP 6030 IMP.305 5..6.1  MCC  1-EZC-A Valve IHO-140 Spliced Wire Connections at the Temporary Brekaer External Wiring Control              Verify Correct To Be Spliced-       Panel-Terminal        Wires Spliced  Temporary Control Wire No.        Point Nos.         TECH 1    TECH 2    Panel Function 4  (Previously dis-                                        Control Switch - "Higt connected from                                          side contact opening Terminal No. 6)                                         circuit 10  (previously dis-                                        Control Switch -  "Low'ide connected from                                                contact opening Terminal No. 2)                                          circuit 3A  (previously dis-                                        Control Switch - "Higt connected from                                          side contact closing Terminal No. 11)                                        circuit 7   (previously dis-                                       Control Switch -     "Iow'ide connected from                                                contact closing Terminal No. 7)                                          circuit 2   (previously dis-                                       Indicating Lights-connected from                                          "High" side Terminal No. 8)
Page 12 of  18 Rev. 0
 
                                                      **1 THP 6030 IMP.305 Valve NHO-151 Spliced Wire Connections at the Temporary Breaker External Wiring Control              Verify Correct To Be Spliced-      Panel-Terminal        Wires Spliced    Temporary Control Wire &#xc3;o.        Point Nos.        TECH 1    TECH 2      Panel Function 4  (Previously dis-                                          Control Switch - "High connected from                                            side contact opening Terminal No. 6)                                           circuit 10  (previously dis-                                         Control Switch << "Low" connected from                                            side contact opening Terminal No. 2)                                          circuit 3A  (previously dis-                                          Control Switch - "High connected from                                            side contact closing Terminal No. 11)                                          circuit 7  (previously dis-                                          Control Switch - "Low" connected from                                            side contact closing Terminal No. 7)                                          circuit 2  (previous,ly dis-                                        Indicating Lights-connected from                                            "High" side Terminal No. 8)
Page 13  of  18 Rev. 0
 
                                                      **1 TIP 6030 IMP.305 5.6.2   MCC  1-EZC-B Valve IHO-120 Spliced Wire Connections at the Temporary Breaker External Wiring Control              Verify Correct To Be Spliced-      Panel-Terminal        Wires Spliced  Temporary Control Wire  No.        Point Nos.        TECH 1     TECH 2   Panel Function 4   (Previously dis-                                        Control Switch - "Higt connected from                                          side contact opening Terminal No. 6)                                          circuit 10  (previously dis"                                        Control Switch - "Iow'ide connected from                                                contact opening Terminal No. 2)                                          circuit 3A  (previously dis-                                        Control Switch - "Higl connected from                                          side contact closing Terminal No. 11)                                        circuit 7  (previously dis-                                        Control Switch -   "Low'ide connected from                                                contact closing Terminal No. 7)                                          circuit 2  (previously dis-                                         Indicating Lights-connected from                                          "High" side Terminal No. 8)
Page 14 of  18 Rev. 0
 
                                                      **1 THP 6030 IMP.305 Valve INO-128 Spliced Wire Connections at the Temporary Breaker External Wiring Control              Verify Correct To Be Spliced-       Panel-Terminal        Wires Spliced  Temporary Control Wire No.        Point Nos.              l    TECH 2    Panel Function  'ECH 4   (Previously dis-                                         Control Switch - "High connected from                                          side contact opening Terminal No. 6)                                          circuit 10  (previous ly dis-                                       Control Switch - "Low" connected from                                          side contact opening Terminal No. 2)                                          circuit 3A  (previously dis-                                         Control Switch - "Higb connected from                                          side contact closing Terminal No. 11)                                        circuit 7  (previously dis-                                         Control Switch - "Low" connected from                                          side contact closing Terminal No. 7)                                          circuit 2  (previously dis-                                         Indicating Lights-connected from                                          "High" side Terminal No. 8)
Page 15 of 18 Rev. 0
 
                                                      **1 THP 6030 IMP.305 Valve NNO-152 Spliced Wire Connections at the Temporary Breaker External Wiring Control              Verify Correct To Be Spliced-      Panel-Terminal        Wires Spliced  Temporary Control Wire No.        Point Nos.         TECH I    TECH 2    Panel Function 4  (Previously dis-                                        Control Switch - "High connected from                                          side contact opening Terminal No. 6)                                          circuit 10  (previously dis-                                        Control Switch - "Low" connected from                                          side contact opening Terminal No. 2)                                          circuit 3A  (previously dis-                                         Control Switch  'High connected from                                          side contact closing Terminal No. 11)                                        circuit 7  (previously dis-                                        Control Switch - "Low" connected from                                          side contact closing Terminal No. 7)                                          circuit 2  (previously dis-                                        Indicating I.ights-connected from                                          "High" side Terminal No. 8)
Page 16  of   18 Rev. 0
 
                                                      **1 THP 6030  ZNP.305 5.6.3    MCC  1-EZC-D Valve IMO-130 Spliced Wire Connections at the Temporary Breaker External Wiring Control              Verify Correct To Be Spliced-      Panel-Terminal        Wires Spliced  Temporary Control Wire No.         Point Nos.         TECH l    TECH 2    Panel Function 4  (Previously dis-                                        Control Switch - "High connected from                                          side contact opening Terminal No. 6)                                          circuit 10  (previously dis-                                        Control Switch - "Low" connected from                                          side contact opening Terminal No. 2)                                          circuit 3A  (previously dis-                                         Control Switch - "High connected from                                          side contact closing Terminal No. 11)                                        circuit 7  (previously dis-                                        Control Switch - "I.ow" connected from                                          side contact closing Terminal No. 7)                                          circuit 2  (previously dis-                                        Indicating Lights-connected  from                                          "High" side Terminal No. 8)
Page 17  of 18 Rev. 0
 
                                                      **1 THP  6030 IMP.305 Valve NMO-153 Spliced Wire Connections at the Temporary Breaker External Wiring Control                Verify Correct To Be Spliced        Panel-Terminal,      Wires Spliced  Temporary Control Wire No.          Point Nos.        TECH 1    TECH 2    Panel Function 4  (Previously dis-                                         Control Switch    "High'ide connected from                                                contact opening Terainal No. 6)                                          circuit 10  (previously dis-                                          Control Switch - "Low" connected from                                            side contact opening Terminal No. 2)                                          circuit 3k. (previously dis-                                         Control Switch  "High'ide connected from                                                contact closing Terminal No. 11)                                          circuit 7  (previously dis-                                          Control Switch - "Low" connected from                                            side contact closing Terminal No. 7)                                          circuit 2  (previously dis-                                          Indicating Lights connected from                                            "High" side Terainal No. 8) 6.0    When  Ooerations has operated a valve by use of the temporary control panel, its MCC may be de-energized.
6.1 After verification-of de-energization, the temporary control panel is disconnected from the compartment.
6.2    The temporary control panel may now be connected into another compartment after    it  has been de-energized.
6.3    The above sequence,    steps 6.1 and 6.2, is repeated until all  valves required to be operated have been operated.
6.4    Removal of the temporary control panel's wiring from the compartment does not require verification.
7.0    Restoration 7.1 Restoration of Containment valves will be documented by job orders which restore the valves to their normal operational status, after mitigation of the fire.
7~2    REVIEWED BY                                    DATE Page 18  of  18 Rev. 0
 
                                                **1 THP  6030 IMP.30S APPENDIX A CONTAINMEKT VALVES REPAIR PROCEDURE SIRES TO NE DISCON ECTED AT  KC 1-EZC-C I
WIRE NO.      TERMINAL CABLE NO. I(COIOR CODE)    POINT NQ, 9302G-1          3A(W)        3A 3(BK)        ll 4(BK)          4 930 1G-1          5(W)          5 10(GN)        10 8(R)          3 I            I      2(BL)          8      WIRES 2, 3A, 4, 7, AND I  3A(RYL)          3h        10 CONTAINED IN CABLE I 8319PG-1  I      4(BK)          6      8319PG-1 MUST BE DIS-I            I  7(BKYL)            7      CONNECTED AND THEN I            I    10(YL)            2      SPLICED TO h NEW WIRE I            I                              FOR CONNECTION TO THE I            I                              TEMPORARY CONTROL PANEI AT TERMINAL I
I I
I                              POINTS  ll, 5, 1, 7 AND 4 RESPECTIVELY.
I            I I
I I
I                  2(BI.)          8 I                3(RYL)          11                                  I I                  4(BK)          6                                I I                5(GNBK)            5                                I I                6(GNYL)          10                                  I I 8898G-1        7(BKYL)            7                                I 8(RBK)            3                                I 9(RGN)          8A                                  I 10(YL)            2                                I ~
12(GY)        12                                  I 13(GN)        13                                  I WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO-110 Page 1  of 31 Rev. 0
 
                                              **1 THP 6030 IMP.305 APPENDIX A TERR]eh'~
Cv 7ZRH  le PO(+T NO.
5'tRK HO, lO 3A          31 l3          I IL          sZ, 8<
k'1L K
N O'4 t30 Z.6-l ia        'fL 9  0/& I 83i9PC-j g8)RG-j WIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE IMO-110 Page 2  of 31 Rev. 0
 
                          **1 TEP 6030 IMP.305 APPENDIX A TERMI~At ScOCK TfR&#xc3;ie'h wiR P'OlNT hlO. eD, wP c ZND.
7 g,MPO RARy 7R                                gumtCRS AN TERYI rAL pO I e  r 784WJ hlAL, 4i)>gf Po]HT'o Alo.
S pL<cE (gyp>cA~)
            /0 WIRING TO BE CONNECTED S ZieeC -~
VALVE IMO-110 Page 3 of 31 Rev. 0
 
                                      **1 THP 6030 IMP.305 APPENDIX A TSRH ical.
Sc CK 7 jPHjNA 0'/RE  NO.
FO]mT  NO.
iO
    /3 PA                        8c KYL.
K 9302'g1 PL 93OI R -I 80 8+PR- l 887o R-]
WIRING TO BE DISCONNECTED AT MCC 1-EZC-B VATVE IMO-120 Page 5 of 31 Rev. 0
 
                            **1 THP 6030 IMP.305 APPENDIX A 7 fgwiNAL.
BcOC,<
~RWiuri Nil PO>NT h/0. HO.
MP                                  '7g~ po mR Y 7R    c END.                      g~~PCR-Ah/
TERRI N4L POs N7-TERrqi~SL, U)(Rf Po(~T No No.
    /O Sr~icE (TYPICAL) t Ry~
6
              /0 508+PE-I WIRING TO BE CONNECTED VALVE IMO-120 Page 6 of  Ql Rev. 0
 
                                              **1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO bE DISCONNECTED AT MCC 1-EZC-D WIRE NO.      TERMINAL CABLE NO. l (COLOR CODE)    POINT NO.
93046-1            3A(W)        3A 3(BK)        ll                                l I
4(BZ)                                          I 93036-1            5(w)                                          I 10(GN)                                            l 8(R)
I      2(Bl.)        8      WIRES 2, 3A, 4, 7, AND I    3A(RYL)          3A      10 CONTAINED IN CABLE l 8293PG-1          4(BK)          6      8293PG-1 MUST BE DIS-      I I    7(BKYL)          7      CONNECTED AND THEN        l I    10(YL)          2    I SPLICED TO A NEW WIRE I                            I FOR CONNECTION TO THE I                            I TEMPORARY CONTROl, I                            I PANEL AT TERMINAL l                            I POINTS 1 1, 5, 1, 7 I                            I AND 4 RESPECTIVELY.
I 2(BL)          8 I
I l
3(RYL) 4(BK)
I I
l ll 6
I I
I    5(GNBK)    I    5    I l    6(GNYL)    I    10    I 86246-1    l    7(BKYL)    I    7    I                          I I    8(RBK)    I    3    I                          I l    9(RGN)    i    8h    I                          I 10(YL)    l    2    I                          l 12(GY)    I    12    I                          l 13(GN)    l    13    I                          I I                I          l                          I WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO<<130 Page 7  of 31 Rev. 0
 
                                            **1 THP 6030 Xm.305 APPENDIX  h TgRH iuAL.
8~ t'x TERHlMfl O'IRK HO.
p0]NT NO.
IO i3    I BK NYL.
k'lL.
K N5                                    't304G 1 0  6-I 8 P.93P&
Z+G MIRING TO BE DISCONNECTED AT NCC 1-EZC-D VALVE IMO-130 Page 8  of 3$
Rev. 0
 
                          **1  THP  6030 IMP.305 APPENDIX A TQRMlruAl SLOCK TfRgi Nh veil PolM  NO. eo.
wP                              7c~eoMRV R  e ZNb.
Kvl&fE.P AN TERRI NAL FO>N7-
                                            'ECHiNR<
CA)sgf PoiNT No No.
    /o S~ucE t7veica~)
            /0 8 ~'t3 P&-/
VALVE IMO-130 Page 9  of 31 Rev. 0
 
                                                **1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED AT MCC 1-EZC-h I  WIRE NO ~        TERMI NAf CABfE NO. I(COLOR CODE)        POINT NO.
9304R-1            3A(W)            3A 3(BK)            ll BK 5(W) 9303R-1            10(GN) 8(R)
I        2(BL)              8    WIRES 2, 3A, 4, 7g AND I    3A(RYL)            3A    10 CONTAINED IN CABLE I        4(BK)              6    8471PR-1 NJST BE DIS-8471PR-1  I    7(BKYL)                    CONNECTED AND THEN I      10(YI.)            2    SPLICED TO A NEW WIRE I                                FOR CONNECTION TO THE I                                TEMPORARY CONTROf I                                PANEL AT TERMINAL I                                POINTS  ll, 5,  1, AND 4 RESPECTIVELY.
7 I
2 (Br.)            8 3 (RYr.)          11 4(BK)            .6 5(GNBK)              5 6(GNYL)              10 9102R-1        7(BKYI.)              7 8(RBK)      I        3 9(RGN)      I      8A 10(YL)      I        2 ~
12 (GY)    I 13(GN)      I . 13 I
WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO-140 Page 10  of  31 Rev. 0
 
                                          **1 THP 6030 IMP.305 APPENDIX A TsRet~~a Bt. Cx 7j'PH )MA %AIRE HO.
PO>e7 NO.
            '0
    /3 8A                      8<
4'fL K
                                        +7IPR-I 0soZ.a- i WIRING TO BE DISCONNECTED AT MCC 1-EZC-A VALVE IMO-140 Page 11  of 31 Rev. 0
 
                                  **1 THP 6030 IMP.305 APPENDIX A TERN 1 NWL BtOCK
~gg INI    WIAK Po)NT bio. HO.
MP                                    Tr ~Pe RARV yR    t." ZN7).
3 v,mf'c p-Ah/ L TERRI NAL F p]e7-7ERr<iKAL, 4))
Point'o        gf'lo.
    /o
                                    ~P~'cK  (<ASPIC~()
8a, bky
                /0            Va, 8+7I PR-I WIRING TO BE CONNECTED VALVE IMO-140 Page 12  of 31 Rev. 0
 
                                                **1 THP 6030  IMP 305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE I
WIRES TO BE DISCONNECTED AT MCC 1-EZC-B WIRE NO.      TERMINAL CABLE NO. I (COLOR CODE)    POINT NO.
WIRES 3, 4p 7 AND 2(BI.)          8      10 CONTAINED IN CABLE I    3 (RYL)          11      8087PR-1 MUST BE DIS-8087PR-1  I      4 (BK)          6      CONNECTED AND THEN I  7(BKYL)            7      SPLICED TO A NEW WIRE I    10(YL)                  I FOR CONNECTION TO I                            I THE TEMPORARY CONTROL I                            I PANEL AT TERMINAL I                              POINTS 5, 1, 7 AND 4 I                              RESPECT IVEI Y.
I I                  2(BL)            8 I                3(RYL)          11 I                  4(BK)            6 I                5(GNBK)            5 I                6(GNYL)          10 I 8871R-1        7(BKYL)            7 I                8(RBK)            3 I                9(RGN)          8A I                10(YL)            2 I                11(GN)            1 WIRING -.ABULATION FOR RHR INLET ISOLATION VALVE IMO-128 WIRING TABULATION FOR RHR INLET ISOLATION VALVE IMO-128 Page 13  of 31 Rev. 0
 
                                      ++1 THP 6030 IMP.305 APPENDIX A TERY]ohl.
8~ CX TCRHiuA W'IRf Ho.
PIN)NT No. CoLoR RWa b SNVL RSN 7 8K'K 5'B K
          /0  .YL SoS eR;I 871 MIRING TO BE DISCONNECTED AT  MCC 1-EZC-B VALVE IMO-128 Page 14 of 31 Rev. 0
 
                              **1 THP 6030 IMP.305
    )- KC-                    APPENDIX A 7pRMiwAt BCOC,W TZRwi NA  WiCK Po)W NO. Nd.
Ta~ pe RARV
                                        ~v v,p~v AN TERYlNAL POI NT 7f RHiNAK, CA)s~
Po~~T'io No.
                                    'SpLiCE t7yp>CN )
                /0 8087PR;I WIRING TO BE CONNECTED VALVE IMO-128 Page 15  of 31 Rev. 0
 
                                                **1 THP 6030 IMP-305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED t      AT MCC 1-EZC-C I
I                WIRE NO.      TERMINAL CABLE NO. l(COLOR CODE)    POINT &#xc3;O.            REMARKS WIRES 3, 4 ~ 7 AND 2(BL)          8      10 CONTAINED IN CABLE 3(RYL)        11      9190PG-1 NJST BE DIS-9190PQ-1          4(BK)          6      CONNECTED AND THEN 7(BKYL)            7      SPLICED TO A NEW WIRE 10(YL)            2      POR CONNECTION TO THE TEMPORARY CONTROL PANEL AT TERMINAL POINTS 5, 1, 7, AND 4 RESPECTIVELY.
2(BL) 3(RYI.)
4(BK) ll 8
6 5(GNBK)          5 6(GNYL)          10 9082G- 1  I    7(BKYL)          7 I      8(RBK)          3 I      9(RGN)          8A j      10(YL)          2 I      11(GN)          1 I
MIRING TABULATION FOR RHR INLET ISOLATION VALVE ICM-129 Page 16  of 31 Rev. 0
 
                                  +*1 THP 6030 IMP 305
                                'APPENDIX A .
TKRWiuA SlRE Ho.
PO]+7 No. COc.dR RGM SL
                    '7 SKVL 8x
                  /0 .VL 9(fopt -I WIRING TO BE DISCONNECTED AT MCC  1-EZC-C VALVE ICM-129 Page 17    of 31 Rev. 0
 
                            **1 THP 6030  IP 305 APPENDIX A TfRpi Mh  WE'RE
&pic QO. HO, IO Ta~~~~v      .
3 V&fKW AN 7'ERR t NAL PO I N 7 7ERHiHAL, u))
Point No &la.
SPLtCE (TvPICIL)
RYl.
                /0 WIRING To BE CONNECT            )~/OPAL  I VALVE ICN-129 Page 18  of  31 Rev. 0
 
  ~ ~
I
                                                          **1 THP 6030 IMP-305 APPENDIX A CONTAINM1 NT VALVES REPAIR PROCEDURE I
WIRES TO bE DISCONNECTED AT MCC 1-EZC-A I  WIRE NO.        TERMINAL CABLE NO. I(COLOR CODE)      POINT NO.
I 2(BL)            8      WIRES 2, 3, 4, 7 AND 8750PR-1 I
I      3(RYL) 4(BK) ll6 10 CONTAINED IN CABLE 8750PR-1 MUST BE DIS-I    7(BKYL)              7      CONNECTED AND THEN I      10(YL)            2      SPLICED TO A NEW WIRE I                                POR CONNECTION TO THE    I I                                  TEMPORARY CONTROL I                                  PANEL AT TERMINAL I
I POINTS AND 4 ll, 5, 1, 7 RESPECTIVELY.
I I
I 2(BL)
I I
I I
I I
3(RYL) 4(BK) ll 8
6 I          I      5(GNBK)            5                                  I I          I    6(GNYL)            10                                I I  8676R-1  I    7 (BKYL)            7                                I I          I      8(RBK)            3                                I I          I      9(RGN)            8A                                I I          I      10(YL)            2                                I I          I      12(GY)            12                                I I                  13(GN)            13                                I I
WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-151 Page 19 of 31 Rev. 0
 
                                  **1 THP 6030 IMP.305 APPENDIX A 7ERhf!Algal.
8L. CK TERH~uA  WIRE hto.
Peiev'o. COLOR l3    I    GQ I Z. I7 RYa b  GNARL
            '3 RGN SC 7
8K''BK RBK so  .V'L.
                                          -OPR-I R-I WIRING TO BE DISCONNECTED AT MCC 1-EZC-A VALVE NMO-151 Page 20  of 31 Rev. 0
 
                                  **1 THP 6030 IMP.305 APPENDIX A y.pRMi rvha S~Ot K TfRgi NA WICK PoiM  NO. HO, MP                                      TKxPo RORY:
ra    c ZMD,                        Qv mar.W Ahl 7'ERYI NAL, N7-      'O]
7ERW~XA< u)iaE PotuT'o Alp.
                                      ~PL'CE (~V PICf}L)
RVc.
8 7      7              Ky
                /0            Va 8750 PR-)
WIRING TO BE CONNECTED VALVE NMO-151 Page 21  of 31 Rev. 0
 
                                                  **1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED  I AT MCC 1-EZC-B      I I  WIRE NO.      TERMINAl CABLE NO. I(COLOR CODE)      POINT NO.
2(BL) 3(RYL)    I 8
11 WIRES 2, 3,  i,  7 AND 10 CONTAINED IN CABLE I
I 8753PR-1            i(BX)    I      6      8750PR-1 MUST BE DIS-    I 7(BKYL)                    CONNECTED AND THEN 10(YL)          2      SPLICED TO h NEW WIRE    I FOR CONNECTlQN TO THE    I TEMPORARY CONTROL PANEL AT TERMINAL POINTS  ll, 5,  1, AND 4 RESPECTIVElY.
7 I
2(BL)
I I
I I
I I
3(RYL) 4(BK) ll 8
6 I            I  '(GNBK)              5 I            I    6(GNYL)          10 I 8677R-1    I    7(BKYL)            7 I            I      a(RBK)            3 I            I      9(RGN)          Bh I            I      10(YL)            2 I            I      12 (GY)          12 I            I      13(GN)          13 I            I WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-152 Page 22  of  31 Rev. 0
 
                                      **1 THP 6030 IMP-305 APPENDIX A TER'H]eAI 8~ CK TZPWiuA w'ARE Ho.
POtN7 No. g COLOR l3      I      lQ iZ      iP 3    RSC t'0 b  <NIAL 9  RtN Gl.
            '7 ALKYL Bv 5'BK 10  .YL 87BF a-9C77R-WIRING TO BE DISCONNECTED AT MCC 1-EZC-B VALVE NMO-152 Page 23 of  31 Rev. 0
 
                                **1  THP 6030  IMP.305 APPENDIX A 7$ R< f NAt S~Ot'l4 rfRpiul    wikK Po(W No. ND.
Tc~poMRV Tv~i E.A TERPfl NAL pOi+7-7ECHivAL, u)iaE Boiler ko No.
SPalcE (+YPICAL)
Bt.
                /0 WIRING TO BE CONNECTED VALVE NMO-152 Page 24  of  31 Rev. 0
 
                                                  **1 THP 6030 IMP.305 APPENDIX A CONTAIN%.'NT VALVES REPAIR PROCEDURE I
WIRES TO BE DISCONNECTED AT MCC 1-EZC-D I  WIRE NO.      TERMINAL CABLE NO. l(COLOR CODE)    POINT NO.
WIRES 2, 3, 4, 7 AND 2(Bt.)        8        10 CONTAINED IN CABLE 3(RYL)        11        8764PG-1 MUST BE DIS-8764PG-1            4(BK)          6        CONNECTED AND THEN 7.(BKYI )        7        SPLICED TO h NEW WIRE 10(YL)          2        FOR CONNECTION TO THE TEMPORARY CONTROl PANEL AT TERMINAL POINTS AND 4 ll, 5, 1, 7 RESPECTIVELY.
I I
I 2(BL)
I I
I I
I I
3(RYt 4(BK)
                          )        ll 8
6 I            I    5(GNBK)          5 I            I    6(GNYL)          10 I 8931G-1    I    7(BKYL)          7 I            I      8(RBK)          3 l            I      9(RGN)          8A I            I      10(YL)          2 I            I      12(GY)          12 I            I      13(GN)          13 I            I WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-153 gage 25  of 31 4ev. 0
 
                              *a1 THP 6030 IMP 305 APPENDIX A TSRPf >eht 8~ CK TZRX>uA F'OINT IVO.
13    /
            '7 8KYL NBK 87CHP'& I AT MCC 1-EZC-D WIRING TO BE DISCONNECTED VATVE NMO-153 Page 26  of 31 Rev. 0
 
                              **1 THP 6p3p Z~ 305 APPENDIX A
~R~i NJSL Boot.'K TfRHi MA  wMK PowT NO. hid.
eP                                    TKxPe RARY~
ra    e END.                        Ze~e~a r4u TERHt NIL PO]NF TERmiNAL u)>
Pot~7 Mo No.
Ba Ayg
                                    +f'L>CE (<yp>CW ).
7      7
              /0 WIRING TO BE CONNECTED VALVE NMO-153 Page 27    of 31 Rev. 0
 
        ~      ~      0
~  ~  ~ ~
  ~  ~
            ~ ~  ~  ~
                    $    ~
 
                                    **1 THP 6030 IMP.305 APPENDIX A TER'MIehL.
TE'RHlwA VIRK HO.
RliNr arp. CO~OR II  GN Rsa b  GMYL 8A      9 RGN 8L
            '7 8KYL xo .VL.
9i81PG- I 9o83$  -I MIRING TO BE DISCONNECTED AT MCC  1-EZC-C VALVE ICM-ill Page 29  of 31 Rev. 0
 
i< I I-R                    **1 THP 6030 MP.305 APPENDIX A 7f R+fNAL4 BLOC 7fRg)hll PotM  NO.
Pg~PO RARy    .
e ZHD.                      QQ~ f~P~
Aht 7'ERR I NAL POINT 7EWWIHAL, t'ai Poi~T No bio.
                                    'pl.iCE  tTYPIChL)
R.yg 7        7
                /0 q>81PG-  J WIRING TO BE CONNECTED VALVE    ICM-ill Page 30  of  31 Rev. 0
 
                                                  **1 THP 6030 IMP.305 APPENDIX A pcs, rz~nrwav        roar    N>. (~sr>chic) hali'ac pro.  (re~~<)
IZ,
          "- PI aw 34 I                                    I
                      /      Z.          5          I I                                    I
                                                                                            /0 I                                    I I                                    I                                    8A I
            ~  l~~ ~ ~~~~~~~~~~el Z Q~rgoL, Ski T~
r~<Pog,hay Chary 4~0 Tee]cgriiu Auc 0
Ops'-    C  orat-'~r S~/re&
PJi 7>!  Pair!.8 r!fl) CO<~< >
                                  ~gtvcH POS<r~o<          CozrhC.7 errKT hler.      az6a      Cc.aS F      FuwCrioal "jjI')6H " Sl OC I I t-2.        X                      gag    C>RCulT 1%LogJ +  5 /OE 3    HI-+        X,                () pp~g~
SiOC l-0 Cite.vf1'glypt" sH                                            CiRCQt7 7~l8                                        5I elf i      T
                  )C- DKNaTf5 "oeTAc,T cLosfD TEMPORARY CONTROL ARD INDICATION PANEL TYPICAL WIRING AND SWITCH DEVELOPMENT Page 31    of  31 Rev. 0
 
q ~
~ a i.,
e r
J I
I ff I'(
 
EPP  Appendix      B LIST OF EFFECTIVE PAGES Revision Number and Dat 1 of 6                                            Revision    4  - 12/15/ 2 2of6                                              Revision 4      - /15/82 1
3of6                                              Revision    4  - 12/15/82 4of6                                              Revisi      4  - 12/15/82 5of6                                              Re    sion  4  - 12/15/82 6 of                                              evision    4  - 12/15/82 Attachm    1, Page 1 of 1                          Revision    4  - 12/15/82 Attachmeh2 2, Page  1 of2                            Revision    4  - 12/15/82 Page 20f2                            Revision    4  - 12/15/82 , Page  1 of2                          Revision    4  - 12/15/82 Page 2 of 2                          Revision    4  - 12/15/82 l
A    hment 4, Page Page 1
Page 3 Page 4 ttachment 5, Page  1 of 2of4 of of of 4
4 4
Revision Revision Revision Revision 4
4 4
4
                                                                    - 12/15/82 Revision 4 - 12/15/82
                                                                    - 12/15/82
                                                                    - 12/15/82
                                                                    - 12/15/82 DEC    17    1982 Page  1  of  1 Memorial Hospital Agreement Revision    4
 
EPP  Appendix  B INDIANA AND MICHIGAN ELECTRIC COMPANY DONALD C. COOK NUCLEAR PLANT HOSPITAL ASSISTANCE PLAN GENERAL All Company safety policies and procedures applicable to conventional generating plant operations apply to the Donald C. Cook Nuclear Plant.
In addition, special rules and procedures govern work involving radio-active material. Although measures have been taken to control radio-active contamination, its presence will require the implementation of special procedures governing the treatment of a person injured in a contaminated area. First, the person must be decontaminated unless the nature and/or extent of the injury makes immediate removal from the area and treatment necessary or requires treatment in the area.
Second,  if a wound is involved,  it may become contaminated with radio-active material and complete decontamination may not be possible with-out aggravating the injury.
All  D. C. Cook Plant Operating Department personnel, appropriate tech-nicians  and the staff have a working knowledge of decontamination pro-cedures and all Shift Operating Engineers, Chemical and Radiation Pro-tection Supervisors and Chemical and Radiation Protection Technicians have completed courses of instruction in First Aid. Normally one or more of these employees will be available to administer      fi rst aid while decontamination procedures are completed.
In the event the injury endagers life or limb, immediate medical treat-ment  shall always precede decontamination procedures'onsequently, provisions have been made for contamination control at Memorial Hospial in St. Joseph and Mercy Hospital in Benton Harbor.
In cooperation with Indiana & Michigan Electric Company, the partici-pating hospitals will have a staff of physicians and hospital personnel trained to implement the proper methods of contamination control.
Indiana & Michigan Electric Company will ensure that training courses are conducted to provide hospital personnel with basic knowledge of radiation and contamination, as well as control methods. Annual con-ferences and refresher classes will be conducted. Also eriodic tests runs to ensure the o erabilit of the Hos ital Assistance P an w> 1 Indiana  &  Michigan Electric Company  will ensure the following contami-nation control supplies    will be furnished to the hospitals:
: 1. Disposable Gowns                                            24  pair
: 2. Surgical Gloves                                              24  pair
: 3. Surgeon Caps                                                 12 Page 1 of 6 Memorial Hospital Agreement Revision 4'}}

Latest revision as of 02:27, 4 February 2020

Rev 0 to Procedure 1 Thp 6030 IMP.305, App R Post-Fire Repowering of In-Containment Valves.
ML17324A935
Person / Time
Site: Cook  American Electric Power icon.png
Issue date: 05/29/1986
From:
INDIANA MICHIGAN POWER CO. (FORMERLY INDIANA & MICHIG
To:
Shared Package
ML17324A931 List:
References
1-THP-6030-IMP., NUDOCS 8606130117
Download: ML17324A935 (58)
v • d • e


Text

~ i ~

C

)

FOAM W?C INDIAItIA EI MICHIGAIV EIECTDIC CDAIPANY IINALDC. COOK NUCme PLA,NT PROCEDURE COVER SHEET

Reviaion No.

TITLE APPETIT)EX R POST-FIRE REPCNKKtK OF VALVES SCOPE OF REVlSlON C g i cKTt3 MAY g 9)geg Cot~FRP>l,I.D LOCO...

SIGNATURES REVISION NUMBER r P PREPARED BY DEPARTMENT HEAD APPROVAL INTERFACING DEPARTMENT HEAD CONCURRENCE QUALITY ASSURANCE SUPERVISOR APPROVAL 8606130117 86060 PLANT NUCLEAR PDR ADOCK 05000315 F PDR SAFETY COMMITTEE I

PLANT MANAGER APPROVAL APPROVAL DATE EFFECTIVE DATE

l S I **1 THP 6030 IMP.305 l

LIST OF EFFECTIVE PAGES PAGE NUMBER REVISION NUMBER CS NUMBER 5 Page 1 of 18 Revision 0 Page 2 of 18 Revision 0 Page 3 of 18 Revision 0 Page 4 of 18 Revision 0 Page 5 of 18 Revision 0 Page 6 of 18 Revision 0 Page 7 of 18 Revision 0 Page 8 of 18 Revision 0 Page 9 of 18 Revision 0 a V

I l

Page 10 of 18 Revision 0 Page ll of 18 Revision 0 Page 12 o f 18 Revision 0 Page 13 of 18 Revision 0 Page 14 of 18 Revision 0 Page 15 of 18 Revision 0 Page 16 of 18 Revision 0 Page 17 of 18 Revision 0 Page 18 of 18 Revision 0 APPENDIX A Page 1 of 31 Revision 0 Page 2 of 31 Revision 0 Page 3 of 31 Revision 0 Page 4 of 31 Revision 0 Page 5 of 31 Revision 0 Page 1 of 2 Rev. 0

    • 1 THP 6030 IMP.305 PAGE NUMBER REVISION NUMBER CS NUMBER Page 6 of 31 Revision 0 Page 7 of 31 Revision 0 Page 8 of 31 Revision 0 Page 9 of 31 Revision 0 Page 10 of 31 Revision 0 Page ll of 31 Revision 0 Page,12 of 31 Revision 0 Page 13 of 31 Revision 0 Page 14 of 31 Revision 0 Page 15 of 31 Revision 0 Page 16 of 31 Revision 0 Page 17 of 31 Revision 0 Page 18 of 31 Revision 0 Page 19 of 31 Revision 0 Page 20 of 31 Revision 0 Page 21 of 31 Revision 0 Page 22 of 31 Revision 0 Page 23 of 31 Revision 0 Page 24 of 31 Revision 0 Page 25 of 31 Revision 0 Page 26 of 31 Revision 0 Page 27 of 31 Revision 0 Page 28 of 31 Revision 0 Page 29 of 31 Revision 0 Page 30 of 31 Revision 0 Page 31 of'1 Revision 0 Page 2 of 2 Rev. 0
    • 1 THP 6030 IMP.305 INDIANA 6 MICHIGAN ELECTRIC COMPANY DONALD C COOK NUCLEAR PLANT APPENDIX R POST FIRE REPOWERING OF IN-CONTAINMENT VALVES U-1.0 OBJECTIVE 1.1 Provision of a repair procedure for inside containment motor-operated valves requiring post-fire operation in the event of a loss of control from the Unit 1 Control Room. This procedure allows the alternative operation of these valves from outside of the containment and eliminates the need for plant personnel to enter the containment to manually operate these valves.

1.2 DISCUSSION Sequence of events for repair and operation of a containment valve.

1 2~1 Maintenance will disconnect the power source from the motor control center (MCC) containing the motor starter for the valve to be repaired. An alternate power feed from a previously de-energized circuit, will be connected to the MCC by maintenance.

1.2.2 CEI will disconnect the external wiring from the applicable motor starter, and will connect a temporary valve control and indicating panel to the motor starter circuit.

1.2.3 Operations will then turn on the alternate power source, and operate the valve.

1.2.4 Operations turns off alternate power to the MCC.

1 2.5 C&I disconnects the temporary control and indicating panel from the motor starter circuit.

Step 1.2.2 will be repeated for the motor starter in the same MCC, for the next valve to be operated, followed by steps 1.2.3, 1.2.4 and 1.2.5, until all valves powered from the MCC have been operated.

1.2.6 Motor Control Centers may be de-energized and motor starters modified in any convenient order. One,'r any number, of motor starters in an MCC may be modified as deemed necessary.

Page 1 of 18 Rev. 0

    • 1 THP 6030 IMP ~ 305 1..2.7 This post-fire repair procedure is intended to provide the plant operators with an alternative method of aligning the following inside-containment motor-operated valves from their associated motor control centers located in the engineered safety system and MCC Room at elevation 609 Ft. in the Auxiliary Building:

Valve No. Containment Valve Descri tion MCC IMO-110 Accumulator Isolation Valve 1-EZC-C IMO-120 Accumulator Isolation Valve 1-EZC-B IMO-130 Accumulator Isolation Valve 1-EZC-D IMO-140 Accumulator Isolation Valve 1-EZC-A IMO-128 RHR Inlet Isolation Valve 1-EZC-B ICM-129 RHR Inlet Isolation Valve 1-EZC-C NMO-151 Pressurizer PORV Block Valve 1-EZC-A NMO-152 Pressurizer PORV Block Valve 1-EZC-B NMO-153 Pressurizer PORV Block Valve 1-EZC-D ICM-ill RHR Outlet Isolation Valve l<<EZC-C 1.2.8 This procedure is referenced in and should be used to supplement 12 OHP 4023.100.001, "Unit fl Emergency Remote Shutdown" procedure.

1.3 ASSUMPTIONS 1.3.1 A loss of total plant off-site power for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />.

1.3.2 A fire in any one of the following plant areas:

(a) Control Room, or (b) Control Room Cable Vault, or (c) Auxiliary Cable Vault, or (d) Switchgear Room Cable Vault NOTE: As indicated in the "Objective" section of this procedure, the primary concern is loss of control from thc Control Room. However, not the intent of this procedure to limit it is Control Room usc. This procedure may be used for any fire which occurs outside of the, fire areas containing the valves, motor control centers, electrical penetrations and valve cables (routed from a motor control center to a valve) as specified by this procedure.

Page 2 of 18 Rev 0

    • 1 THP 6030 IMP ~ 305 2~0 REFERENCES
2. 1 10 CFR 50, Appendix R, Section III L.

2.2 PMI-2270, Fire Protection.

2. 3 PMI-2140, Temporary Modifications.

2.4 AEPSC Plant Drawings 1-97331, 1-97332, 1-1316, 1-1315.

2.5 ~*12 OHP 4023.100.001, Unit 41 Emergency Remote Shutdown.

2.6 ~*1 MHP 2140.082.005, Maintenance Procedure for Repowering Containmcnt Valves.

3.0 PRECAUTIONS 3.1 When routing temporary cables, do not obstruct walkways.

Cables shall be routed off to the side or overhead when possible.

3.2 Though the circuits being worked on are de-cncrgizcd, other circuits in close proximity may have voltages present; observe all electrical safety precautions while working on or near energized equipment.

3.3 Ensure that all connections are clean and tight.

3.4 It is'ssumed that the equipment required by this procedure is available. Additionally, usc of equipment required from thc opposite (unaffected) unit should not impair safe continued operation or shutdown of that unit.

4.0 PREREQUISITES 4.1 This proccdurc is to interface with Maintenance Department procedure **1 MHP 2140.082.005, "Maintenance Procedure for Rcpowering Containmcnt Valves", which is the controlling procedure for containmcnt valve repair.

4.2 Striped-tag clearances must bc transferred to C&I from Maintenance Department prior to working on valve motor controls or associated circuitry.

4.2.1 When the temporary valve control panel has been connected, Operations is to be informed that power may be turned on and the valve may be operated.

Page 3 of 18 Rev 0

    • 1 THP 6030 IMP ~ 305 4.3 Verify that all terminals are de-energized prior to lifting or landing wires.

5~0 CONTAINMENT VALVE REPAIR PROCEDURE 5.1 Coordinate with Maintenance Department to determine which MCC has been de-energized and which motor starters will be modified.

5. 1.1 Motor Starters may be modified in any order required, providing the MCC feeding the starters has been de-energized.

5.1.2 Any number, or all, valve motor starters in an MCC may be modified as deemed necessary.

,5 1 3 Verification of lifted wire signatures will document which motor starters are modified.

5.2 Verify that a clearance has been taken on the MCC feeding the selected motor starters, and that the associated circuit breaker is open.

5.3 Open the Breaker compartment front door.

CAUTION: Verify that all terminals are de-energized prior to lifting or landing wires.

5.4 Lift the external wires listed, from their associated terminal pornts. This will disconnect the "low side" of the red and green indicating lights on panel "SIS'r RHR". Independently verify lifted leads.

5.4.1 Verify MCC 1-EZC-A has been de-energized.

MAINT~

CSI'or IMO-140 and/or NMO-151 located in l-EZC-A, disconnect the following external wires:

MCC-1EZC-S TERM POINT WIRE VERIFY LIFTED WIRE VALVE NO. NO. TECH 1 TECH 2 EXT. CABLE NO IMO-140 12 12 9102R-1 13 13 9102R-1 NMO-151 12 12 8676R-1 13 13 8676R-1 Page 4 of 18 Rev. 0

  • ~I THP 6030 1M'05 5;4.2 Verify MCC 1-EZC-B has been de-energized.

MAINT~

C&I For IM0-120, IMO-128 and NMO-152 located in l-EZC-B, disconnect the following external wires:

TERM POINT WIRE VERIFY LIFTED WIRE VALVE NO. NO. TECH 1 TECH 2 EXT. CABLE NO IMO-120 12 12 8870R-1 13 13 8870R-1 IMO-128 8871R-1 NMO-152 12 12 8677R-1 13 13 8677R-1 5.4.3 Verify MCC 1-EZC-C has been de-energized.

MAINT, C&I For IMO-110, ICM-129 and ICM-ill located in l-EZC-C, disconnect the following external wires:

TERM POINT WIRE VERIFY LIFTED WIRE VALVE NO. NO. TECH 1 TECH 2 EKT. CABLE NO IMO-110 12 12 8898G-1 13 13 8898G-1 ICM-129 9082G-1 ICM-ill 9083G-1 5.4.4 Verify MCC 1-EZC-D has been de-energized.

MAINT C&I Page 5 of 18 Rev. 0

A

    • 1 THP 6030 IMP.305 For IMO-130 and IMO-153 located in 1-EZC-D, disconnect. the following external wires:

TEM POINT WIRE VERIFY LIFTED WIRE VALVE NO. NO. TECH 1 TECH 2 EXT. CABLE NO INO-130 12 12 8624G-1 13 13 8624G-1 NNO-153 12 12 8931G-1 13 13 8931G-1 5.5 Connect wiring from the temporary control panel terminal points to MCC terminal points. Independently verify correct connections.

5.5.1 MCC 1-EZC-A Valve INO-140 From Temporary To Breaker Verify Control Panel Verify Terminal 'onnections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Not. TECH 1 TECH 2 Panel Function Control Switch - "Low" s contact opening circuit.

Control Switch - "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit.

8A Control Switch - "Low" s contact closing circuit.

13 9 "Low" side of green ligh 12 10 "I.ow" side of red light.

Page 6 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve NMO-151 From Temporary To Breaker Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH I TECH 2 Point Nos. TECH I TECH 2 Panel Function Control Switch - "Low";

contact opening circuit Control Switch - "High" contact opening circuit 10 Control Switch - "High" contact closing circuit 8A Control Switch - "Low":

contact closing circuit 13 "Low" side of green ligI 12 10 "Low" side of red light

5. 5.2 MCC 1-EZC-B Valve IMO-120 From Temporary To Breaker Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Nos. TECH I TECH 2 Panel Function Control Switch - "Low" .

contact opening circuit.

Control Switch - "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit 8A Control Switch - "Low":

contact closing circuit 13 "Low" side of green ligl 12 10 "Low" side of red light Page 7 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve IHO-128 From Temporary To Breaker Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch - "Lovst >

contact opening circuit.

2, Control Switch - "High" contact opening circuit.

10 Control Svitch - "High" contact closing circuit.

8A Control Switch - "Lov" s contact closing circuit.

13 "Low" side of green lips 12 10 "Lov" side of red light Valve IMO-152 From Temporary To Breaker "

Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch - "Low":

contact opening circuit Control Switch - "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit.

8A Control Svitch << "Lov":

contact closing circuit.

13 "Low" side of green ligl 12 10 "Low" side of red light Page 8 of 18 Rev. 0

    • 1 THP 6030 IMP.305 5.. 5.3 MCC 1-EZC-C Valve IMO-110 From Temporary To Breaker Verify Control Pane I Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch "Low" s contact opening circuit.

Control Switch - "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit.

8A Control Switch - "Low" s contact closing circuit.

13 "Low" side of green ligt 12 10 "Low" side of red light.

Valve ICM-129 From Temporary To Breaker Veri fy Control Pane I Verify Terminal Connections Terminal Connections Temporary Control Point Non. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch - "I,ow" s contact opening circuit.

Control Switch "High" contact opening circuit.,

10 Control Switch - "High" contact closing circuit.

8A Control Switch - "Low" s contact closing circuit.

13 "Low" side of green ligh 12 10 "Low" side of red light.

Page 9 of'8 Rev. 0

    • I THP 6030 IMP.305 Valve ICM-ill From Temporary To Breaker Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control point Nos. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch " "Low" <

contact opening circuit.

Control Switch - "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit.

SA Control Switch - "Low" x contact closing circuit.

13 "Low" side of green ligt 12 10 "Low" side of red light.

5.5.4 MCC 1-EZC-D Valve IMO-130 From Temporary To Breaker Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch - "Low" s contact opening circuit.

,2 Control Switch - "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit.

SA Control Switch - "Low" s contact closing circuit.

13 "Low" side of green ligh 12 10 "Low" side of red light.

Page 10 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve NMO-153 From Temporary To Breaker Verify Control Panel Verify Terminal Connections Terminal Connections Temporary Control Point Nos. TECH 1 TECH 2 Point Nos. TECH 1 TECH 2 Panel Function Control Switch - "Low" s contact opening circuit.

Control Switch " "High" contact opening circuit.

10 Control Switch - "High" contact closing circuit.

8A Control Switch - "Low" s contact closing circuit.

13 "Low" side of green ligh 12 10 "Low" side of red light.

5.6 The following external MCC wiring previously disconnected at the Breaker control wiring terminal points is to be spliced to wires from the temporary control panel:

Page 11 of 18 Rev. 0

  • +1 THP 6030 IMP.305 5..6.1 MCC 1-EZC-A Valve IHO-140 Spliced Wire Connections at the Temporary Brekaer External Wiring Control Verify Correct To Be Spliced- Panel-Terminal Wires Spliced Temporary Control Wire No. Point Nos. TECH 1 TECH 2 Panel Function 4 (Previously dis- Control Switch - "Higt connected from side contact opening Terminal No. 6) circuit 10 (previously dis- Control Switch - "Low'ide connected from contact opening Terminal No. 2) circuit 3A (previously dis- Control Switch - "Higt connected from side contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "Iow'ide connected from contact closing Terminal No. 7) circuit 2 (previously dis- Indicating Lights-connected from "High" side Terminal No. 8)

Page 12 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve NHO-151 Spliced Wire Connections at the Temporary Breaker External Wiring Control Verify Correct To Be Spliced- Panel-Terminal Wires Spliced Temporary Control Wire Ão. Point Nos. TECH 1 TECH 2 Panel Function 4 (Previously dis- Control Switch - "High connected from side contact opening Terminal No. 6) circuit 10 (previously dis- Control Switch << "Low" connected from side contact opening Terminal No. 2) circuit 3A (previously dis- Control Switch - "High connected from side contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "Low" connected from side contact closing Terminal No. 7) circuit 2 (previous,ly dis- Indicating Lights-connected from "High" side Terminal No. 8)

Page 13 of 18 Rev. 0

    • 1 TIP 6030 IMP.305 5.6.2 MCC 1-EZC-B Valve IHO-120 Spliced Wire Connections at the Temporary Breaker External Wiring Control Verify Correct To Be Spliced- Panel-Terminal Wires Spliced Temporary Control Wire No. Point Nos. TECH 1 TECH 2 Panel Function 4 (Previously dis- Control Switch - "Higt connected from side contact opening Terminal No. 6) circuit 10 (previously dis" Control Switch - "Iow'ide connected from contact opening Terminal No. 2) circuit 3A (previously dis- Control Switch - "Higl connected from side contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "Low'ide connected from contact closing Terminal No. 7) circuit 2 (previously dis- Indicating Lights-connected from "High" side Terminal No. 8)

Page 14 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve INO-128 Spliced Wire Connections at the Temporary Breaker External Wiring Control Verify Correct To Be Spliced- Panel-Terminal Wires Spliced Temporary Control Wire No. Point Nos. l TECH 2 Panel Function 'ECH 4 (Previously dis- Control Switch - "High connected from side contact opening Terminal No. 6) circuit 10 (previous ly dis- Control Switch - "Low" connected from side contact opening Terminal No. 2) circuit 3A (previously dis- Control Switch - "Higb connected from side contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "Low" connected from side contact closing Terminal No. 7) circuit 2 (previously dis- Indicating Lights-connected from "High" side Terminal No. 8)

Page 15 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve NNO-152 Spliced Wire Connections at the Temporary Breaker External Wiring Control Verify Correct To Be Spliced- Panel-Terminal Wires Spliced Temporary Control Wire No. Point Nos. TECH I TECH 2 Panel Function 4 (Previously dis- Control Switch - "High connected from side contact opening Terminal No. 6) circuit 10 (previously dis- Control Switch - "Low" connected from side contact opening Terminal No. 2) circuit 3A (previously dis- Control Switch 'High connected from side contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "Low" connected from side contact closing Terminal No. 7) circuit 2 (previously dis- Indicating I.ights-connected from "High" side Terminal No. 8)

Page 16 of 18 Rev. 0

    • 1 THP 6030 ZNP.305 5.6.3 MCC 1-EZC-D Valve IMO-130 Spliced Wire Connections at the Temporary Breaker External Wiring Control Verify Correct To Be Spliced- Panel-Terminal Wires Spliced Temporary Control Wire No. Point Nos. TECH l TECH 2 Panel Function 4 (Previously dis- Control Switch - "High connected from side contact opening Terminal No. 6) circuit 10 (previously dis- Control Switch - "Low" connected from side contact opening Terminal No. 2) circuit 3A (previously dis- Control Switch - "High connected from side contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "I.ow" connected from side contact closing Terminal No. 7) circuit 2 (previously dis- Indicating Lights-connected from "High" side Terminal No. 8)

Page 17 of 18 Rev. 0

    • 1 THP 6030 IMP.305 Valve NMO-153 Spliced Wire Connections at the Temporary Breaker External Wiring Control Verify Correct To Be Spliced Panel-Terminal, Wires Spliced Temporary Control Wire No. Point Nos. TECH 1 TECH 2 Panel Function 4 (Previously dis- Control Switch "High'ide connected from contact opening Terainal No. 6) circuit 10 (previously dis- Control Switch - "Low" connected from side contact opening Terminal No. 2) circuit 3k. (previously dis- Control Switch "High'ide connected from contact closing Terminal No. 11) circuit 7 (previously dis- Control Switch - "Low" connected from side contact closing Terminal No. 7) circuit 2 (previously dis- Indicating Lights connected from "High" side Terainal No. 8) 6.0 When Ooerations has operated a valve by use of the temporary control panel, its MCC may be de-energized.

6.1 After verification-of de-energization, the temporary control panel is disconnected from the compartment.

6.2 The temporary control panel may now be connected into another compartment after it has been de-energized.

6.3 The above sequence, steps 6.1 and 6.2, is repeated until all valves required to be operated have been operated.

6.4 Removal of the temporary control panel's wiring from the compartment does not require verification.

7.0 Restoration 7.1 Restoration of Containment valves will be documented by job orders which restore the valves to their normal operational status, after mitigation of the fire.

7~2 REVIEWED BY DATE Page 18 of 18 Rev. 0

    • 1 THP 6030 IMP.30S APPENDIX A CONTAINMEKT VALVES REPAIR PROCEDURE SIRES TO NE DISCON ECTED AT KC 1-EZC-C I

WIRE NO. TERMINAL CABLE NO. I(COIOR CODE) POINT NQ, 9302G-1 3A(W) 3A 3(BK) ll 4(BK) 4 930 1G-1 5(W) 5 10(GN) 10 8(R) 3 I I 2(BL) 8 WIRES 2, 3A, 4, 7, AND I 3A(RYL) 3h 10 CONTAINED IN CABLE I 8319PG-1 I 4(BK) 6 8319PG-1 MUST BE DIS-I I 7(BKYL) 7 CONNECTED AND THEN I I 10(YL) 2 SPLICED TO h NEW WIRE I I FOR CONNECTION TO THE I I TEMPORARY CONTROL PANEI AT TERMINAL I

I I

I POINTS ll, 5, 1, 7 AND 4 RESPECTIVELY.

I I I

I I

I 2(BI.) 8 I 3(RYL) 11 I I 4(BK) 6 I I 5(GNBK) 5 I I 6(GNYL) 10 I I 8898G-1 7(BKYL) 7 I 8(RBK) 3 I 9(RGN) 8A I 10(YL) 2 I ~

12(GY) 12 I 13(GN) 13 I WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO-110 Page 1 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A TERR]eh'~

Cv 7ZRH le PO(+T NO.

5'tRK HO, lO 3A 31 l3 I IL sZ, 8<

k'1L K

N O'4 t30 Z.6-l ia 'fL 9 0/& I 83i9PC-j g8)RG-j WIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE IMO-110 Page 2 of 31 Rev. 0

    • 1 TEP 6030 IMP.305 APPENDIX A TERMI~At ScOCK TfRÃie'h wiR P'OlNT hlO. eD, wP c ZND.

7 g,MPO RARy 7R gumtCRS AN TERYI rAL pO I e r 784WJ hlAL, 4i)>gf Po]HT'o Alo.

S pL<cE (gyp>cA~)

/0 WIRING TO BE CONNECTED S ZieeC -~

VALVE IMO-110 Page 3 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A TSRH ical.

Sc CK 7 jPHjNA 0'/RE NO.

FO]mT NO.

iO

/3 PA 8c KYL.

K 9302'g1 PL 93OI R -I 80 8+PR- l 887o R-]

WIRING TO BE DISCONNECTED AT MCC 1-EZC-B VATVE IMO-120 Page 5 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A 7 fgwiNAL.

BcOC,<

~RWiuri Nil PO>NT h/0. HO.

MP '7g~ po mR Y 7R c END. g~~PCR-Ah/

TERRI N4L POs N7-TERrqi~SL, U)(Rf Po(~T No No.

/O Sr~icE (TYPICAL) t Ry~

6

/0 508+PE-I WIRING TO BE CONNECTED VALVE IMO-120 Page 6 of Ql Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO bE DISCONNECTED AT MCC 1-EZC-D WIRE NO. TERMINAL CABLE NO. l (COLOR CODE) POINT NO.

93046-1 3A(W) 3A 3(BK) ll l I

4(BZ) I 93036-1 5(w) I 10(GN) l 8(R)

I 2(Bl.) 8 WIRES 2, 3A, 4, 7, AND I 3A(RYL) 3A 10 CONTAINED IN CABLE l 8293PG-1 4(BK) 6 8293PG-1 MUST BE DIS- I I 7(BKYL) 7 CONNECTED AND THEN l I 10(YL) 2 I SPLICED TO A NEW WIRE I I FOR CONNECTION TO THE I I TEMPORARY CONTROl, I I PANEL AT TERMINAL l I POINTS 1 1, 5, 1, 7 I I AND 4 RESPECTIVELY.

I 2(BL) 8 I

I l

3(RYL) 4(BK)

I I

l ll 6

I I

I 5(GNBK) I 5 I l 6(GNYL) I 10 I 86246-1 l 7(BKYL) I 7 I I I 8(RBK) I 3 I I l 9(RGN) i 8h I I 10(YL) l 2 I l 12(GY) I 12 I l 13(GN) l 13 I I I I l I WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO<<130 Page 7 of 31 Rev. 0

    • 1 THP 6030 Xm.305 APPENDIX h TgRH iuAL.

8~ t'x TERHlMfl O'IRK HO.

p0]NT NO.

IO i3 I BK NYL.

k'lL.

K N5 't304G 1 0 6-I 8 P.93P&

Z+G MIRING TO BE DISCONNECTED AT NCC 1-EZC-D VALVE IMO-130 Page 8 of 3$

Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A TQRMlruAl SLOCK TfRgi Nh veil PolM NO. eo.

wP 7c~eoMRV R e ZNb.

Kvl&fE.P AN TERRI NAL FO>N7-

'ECHiNR<

CA)sgf PoiNT No No.

/o S~ucE t7veica~)

/0 8 ~'t3 P&-/

VALVE IMO-130 Page 9 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED AT MCC 1-EZC-h I WIRE NO ~ TERMI NAf CABfE NO. I(COLOR CODE) POINT NO.

9304R-1 3A(W) 3A 3(BK) ll BK 5(W) 9303R-1 10(GN) 8(R)

I 2(BL) 8 WIRES 2, 3A, 4, 7g AND I 3A(RYL) 3A 10 CONTAINED IN CABLE I 4(BK) 6 8471PR-1 NJST BE DIS-8471PR-1 I 7(BKYL) CONNECTED AND THEN I 10(YI.) 2 SPLICED TO A NEW WIRE I FOR CONNECTION TO THE I TEMPORARY CONTROf I PANEL AT TERMINAL I POINTS ll, 5, 1, AND 4 RESPECTIVELY.

7 I

2 (Br.) 8 3 (RYr.) 11 4(BK) .6 5(GNBK) 5 6(GNYL) 10 9102R-1 7(BKYI.) 7 8(RBK) I 3 9(RGN) I 8A 10(YL) I 2 ~

12 (GY) I 13(GN) I . 13 I

WIRING TABULATION FOR SI ACCUMULATOR VALVE IMO-140 Page 10 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A TsRet~~a Bt. Cx 7j'PH )MA %AIRE HO.

PO>e7 NO.

'0

/3 8A 8<

4'fL K

+7IPR-I 0soZ.a- i WIRING TO BE DISCONNECTED AT MCC 1-EZC-A VALVE IMO-140 Page 11 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A TERN 1 NWL BtOCK

~gg INI WIAK Po)NT bio. HO.

MP Tr ~Pe RARV yR t." ZN7).

3 v,mf'c p-Ah/ L TERRI NAL F p]e7-7ERr<iKAL, 4))

Point'o gf'lo.

/o

~P~'cK (<ASPIC~()

8a, bky

/0 Va, 8+7I PR-I WIRING TO BE CONNECTED VALVE IMO-140 Page 12 of 31 Rev. 0

    • 1 THP 6030 IMP 305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE I

WIRES TO BE DISCONNECTED AT MCC 1-EZC-B WIRE NO. TERMINAL CABLE NO. I (COLOR CODE) POINT NO.

WIRES 3, 4p 7 AND 2(BI.) 8 10 CONTAINED IN CABLE I 3 (RYL) 11 8087PR-1 MUST BE DIS-8087PR-1 I 4 (BK) 6 CONNECTED AND THEN I 7(BKYL) 7 SPLICED TO A NEW WIRE I 10(YL) I FOR CONNECTION TO I I THE TEMPORARY CONTROL I I PANEL AT TERMINAL I POINTS 5, 1, 7 AND 4 I RESPECT IVEI Y.

I I 2(BL) 8 I 3(RYL) 11 I 4(BK) 6 I 5(GNBK) 5 I 6(GNYL) 10 I 8871R-1 7(BKYL) 7 I 8(RBK) 3 I 9(RGN) 8A I 10(YL) 2 I 11(GN) 1 WIRING -.ABULATION FOR RHR INLET ISOLATION VALVE IMO-128 WIRING TABULATION FOR RHR INLET ISOLATION VALVE IMO-128 Page 13 of 31 Rev. 0

++1 THP 6030 IMP.305 APPENDIX A TERY]ohl.

8~ CX TCRHiuA W'IRf Ho.

PIN)NT No. CoLoR RWa b SNVL RSN 7 8K'K 5'B K

/0 .YL SoS eR;I 871 MIRING TO BE DISCONNECTED AT MCC 1-EZC-B VALVE IMO-128 Page 14 of 31 Rev. 0

)- KC- APPENDIX A 7pRMiwAt BCOC,W TZRwi NA WiCK Po)W NO. Nd.

Ta~ pe RARV

~v v,p~v AN TERYlNAL POI NT 7f RHiNAK, CA)s~

Po~~T'io No.

'SpLiCE t7yp>CN )

/0 8087PR;I WIRING TO BE CONNECTED VALVE IMO-128 Page 15 of 31 Rev. 0

    • 1 THP 6030 IMP-305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED t AT MCC 1-EZC-C I

I WIRE NO. TERMINAL CABLE NO. l(COLOR CODE) POINT ÃO. REMARKS WIRES 3, 4 ~ 7 AND 2(BL) 8 10 CONTAINED IN CABLE 3(RYL) 11 9190PG-1 NJST BE DIS-9190PQ-1 4(BK) 6 CONNECTED AND THEN 7(BKYL) 7 SPLICED TO A NEW WIRE 10(YL) 2 POR CONNECTION TO THE TEMPORARY CONTROL PANEL AT TERMINAL POINTS 5, 1, 7, AND 4 RESPECTIVELY.

2(BL) 3(RYI.)

4(BK) ll 8

6 5(GNBK) 5 6(GNYL) 10 9082G- 1 I 7(BKYL) 7 I 8(RBK) 3 I 9(RGN) 8A j 10(YL) 2 I 11(GN) 1 I

MIRING TABULATION FOR RHR INLET ISOLATION VALVE ICM-129 Page 16 of 31 Rev. 0

+*1 THP 6030 IMP 305

'APPENDIX A .

TKRWiuA SlRE Ho.

PO]+7 No. COc.dR RGM SL

'7 SKVL 8x

/0 .VL 9(fopt -I WIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE ICM-129 Page 17 of 31 Rev. 0

    • 1 THP 6030 IP 305 APPENDIX A TfRpi Mh WE'RE

&pic QO. HO, IO Ta~~~~v .

3 V&fKW AN 7'ERR t NAL PO I N 7 7ERHiHAL, u))

Point No &la.

SPLtCE (TvPICIL)

RYl.

/0 WIRING To BE CONNECT )~/OPAL I VALVE ICN-129 Page 18 of 31 Rev. 0

~ ~

I

    • 1 THP 6030 IMP-305 APPENDIX A CONTAINM1 NT VALVES REPAIR PROCEDURE I

WIRES TO bE DISCONNECTED AT MCC 1-EZC-A I WIRE NO. TERMINAL CABLE NO. I(COLOR CODE) POINT NO.

I 2(BL) 8 WIRES 2, 3, 4, 7 AND 8750PR-1 I

I 3(RYL) 4(BK) ll6 10 CONTAINED IN CABLE 8750PR-1 MUST BE DIS-I 7(BKYL) 7 CONNECTED AND THEN I 10(YL) 2 SPLICED TO A NEW WIRE I POR CONNECTION TO THE I I TEMPORARY CONTROL I PANEL AT TERMINAL I

I POINTS AND 4 ll, 5, 1, 7 RESPECTIVELY.

I I

I 2(BL)

I I

I I

I I

3(RYL) 4(BK) ll 8

6 I I 5(GNBK) 5 I I I 6(GNYL) 10 I I 8676R-1 I 7 (BKYL) 7 I I I 8(RBK) 3 I I I 9(RGN) 8A I I I 10(YL) 2 I I I 12(GY) 12 I I 13(GN) 13 I I

WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-151 Page 19 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A 7ERhf!Algal.

8L. CK TERH~uA WIRE hto.

Peiev'o. COLOR l3 I GQ I Z. I7 RYa b GNARL

'3 RGN SC 7

8KBK RBK so .V'L.

-OPR-I R-I WIRING TO BE DISCONNECTED AT MCC 1-EZC-A VALVE NMO-151 Page 20 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A y.pRMi rvha S~Ot K TfRgi NA WICK PoiM NO. HO, MP TKxPo RORY:

ra c ZMD, Qv mar.W Ahl 7'ERYI NAL, N7- 'O]

7ERW~XA< u)iaE PotuT'o Alp.

~PL'CE (~V PICf}L)

RVc.

8 7 7 Ky

/0 Va 8750 PR-)

WIRING TO BE CONNECTED VALVE NMO-151 Page 21 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A CONTAINMENT VALVES REPAIR PROCEDURE WIRES TO BE DISCONNECTED I AT MCC 1-EZC-B I I WIRE NO. TERMINAl CABLE NO. I(COLOR CODE) POINT NO.

2(BL) 3(RYL) I 8

11 WIRES 2, 3, i, 7 AND 10 CONTAINED IN CABLE I

I 8753PR-1 i(BX) I 6 8750PR-1 MUST BE DIS- I 7(BKYL) CONNECTED AND THEN 10(YL) 2 SPLICED TO h NEW WIRE I FOR CONNECTlQN TO THE I TEMPORARY CONTROL PANEL AT TERMINAL POINTS ll, 5, 1, AND 4 RESPECTIVElY.

7 I

2(BL)

I I

I I

I I

3(RYL) 4(BK) ll 8

6 I I '(GNBK) 5 I I 6(GNYL) 10 I 8677R-1 I 7(BKYL) 7 I I a(RBK) 3 I I 9(RGN) Bh I I 10(YL) 2 I I 12 (GY) 12 I I 13(GN) 13 I I WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-152 Page 22 of 31 Rev. 0

    • 1 THP 6030 IMP-305 APPENDIX A TER'H]eAI 8~ CK TZPWiuA w'ARE Ho.

POtN7 No. g COLOR l3 I lQ iZ iP 3 RSC t'0 b <NIAL 9 RtN Gl.

'7 ALKYL Bv 5'BK 10 .YL 87BF a-9C77R-WIRING TO BE DISCONNECTED AT MCC 1-EZC-B VALVE NMO-152 Page 23 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A 7$ R< f NAt S~Ot'l4 rfRpiul wikK Po(W No. ND.

Tc~poMRV Tv~i E.A TERPfl NAL pOi+7-7ECHivAL, u)iaE Boiler ko No.

SPalcE (+YPICAL)

Bt.

/0 WIRING TO BE CONNECTED VALVE NMO-152 Page 24 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A CONTAIN%.'NT VALVES REPAIR PROCEDURE I

WIRES TO BE DISCONNECTED AT MCC 1-EZC-D I WIRE NO. TERMINAL CABLE NO. l(COLOR CODE) POINT NO.

WIRES 2, 3, 4, 7 AND 2(Bt.) 8 10 CONTAINED IN CABLE 3(RYL) 11 8764PG-1 MUST BE DIS-8764PG-1 4(BK) 6 CONNECTED AND THEN 7.(BKYI ) 7 SPLICED TO h NEW WIRE 10(YL) 2 FOR CONNECTION TO THE TEMPORARY CONTROl PANEL AT TERMINAL POINTS AND 4 ll, 5, 1, 7 RESPECTIVELY.

I I

I 2(BL)

I I

I I

I I

3(RYt 4(BK)

) ll 8

6 I I 5(GNBK) 5 I I 6(GNYL) 10 I 8931G-1 I 7(BKYL) 7 I I 8(RBK) 3 l I 9(RGN) 8A I I 10(YL) 2 I I 12(GY) 12 I I 13(GN) 13 I I WIRING TABULATION FOR PRESSURIZER PORV BLOCK VALVE NMO-153 gage 25 of 31 4ev. 0

  • a1 THP 6030 IMP 305 APPENDIX A TSRPf >eht 8~ CK TZRX>uA F'OINT IVO.

13 /

'7 8KYL NBK 87CHP'& I AT MCC 1-EZC-D WIRING TO BE DISCONNECTED VATVE NMO-153 Page 26 of 31 Rev. 0

    • 1 THP 6p3p Z~ 305 APPENDIX A

~R~i NJSL Boot.'K TfRHi MA wMK PowT NO. hid.

eP TKxPe RARY~

ra e END. Ze~e~a r4u TERHt NIL PO]NF TERmiNAL u)>

Pot~7 Mo No.

Ba Ayg

+f'L>CE (<yp>CW ).

7 7

/0 WIRING TO BE CONNECTED VALVE NMO-153 Page 27 of 31 Rev. 0

~ ~ 0

~ ~ ~ ~

~ ~

~ ~ ~ ~

$ ~

TE'RHlwA VIRK HO.

RliNr arp. CO~OR II GN Rsa b GMYL 8A 9 RGN 8L

'7 8KYL xo .VL.

9i81PG- I 9o83$ -I MIRING TO BE DISCONNECTED AT MCC 1-EZC-C VALVE ICM-ill Page 29 of 31 Rev. 0

i< I I-R **1 THP 6030 MP.305 APPENDIX A 7f R+fNAL4 BLOC 7fRg)hll PotM NO.

Pg~PO RARy .

e ZHD. QQ~ f~P~

Aht 7'ERR I NAL POINT 7EWWIHAL, t'ai Poi~T No bio.

'pl.iCE tTYPIChL)

R.yg 7 7

/0 q>81PG- J WIRING TO BE CONNECTED VALVE ICM-ill Page 30 of 31 Rev. 0

    • 1 THP 6030 IMP.305 APPENDIX A pcs, rz~nrwav roar N>. (~sr>chic) hali'ac pro. (re~~<)

IZ,

"- PI aw 34 I I

/ Z. 5 I I I

/0 I I I I 8A I

~ l~~ ~ ~~~~~~~~~~el Z Q~rgoL, Ski T~

r~<Pog,hay Chary 4~0 Tee]cgriiu Auc 0

Ops'- C orat-'~r S~/re&

PJi 7>! Pair!.8 r!fl) CO<~< >

~gtvcH POS<r~o< CozrhC.7 errKT hler. az6a Cc.aS F FuwCrioal "jjI')6H " Sl OC I I t-2. X gag C>RCulT 1%LogJ + 5 /OE 3 HI-+ X, () pp~g~

SiOC l-0 Cite.vf1'glypt" sH CiRCQt7 7~l8 5I elf i T

)C- DKNaTf5 "oeTAc,T cLosfD TEMPORARY CONTROL ARD INDICATION PANEL TYPICAL WIRING AND SWITCH DEVELOPMENT Page 31 of 31 Rev. 0

q ~

~ a i.,

e r

J I

I ff I'(

EPP Appendix B LIST OF EFFECTIVE PAGES Revision Number and Dat 1 of 6 Revision 4 - 12/15/ 2 2of6 Revision 4 - /15/82 1

3of6 Revision 4 - 12/15/82 4of6 Revisi 4 - 12/15/82 5of6 Re sion 4 - 12/15/82 6 of evision 4 - 12/15/82 Attachm 1, Page 1 of 1 Revision 4 - 12/15/82 Attachmeh2 2, Page 1 of2 Revision 4 - 12/15/82 Page 20f2 Revision 4 - 12/15/82 , Page 1 of2 Revision 4 - 12/15/82 Page 2 of 2 Revision 4 - 12/15/82 l

A hment 4, Page Page 1

Page 3 Page 4 ttachment 5, Page 1 of 2of4 of of of 4

4 4

Revision Revision Revision Revision 4

4 4

4

- 12/15/82 Revision 4 - 12/15/82

- 12/15/82

- 12/15/82

- 12/15/82 DEC 17 1982 Page 1 of 1 Memorial Hospital Agreement Revision 4

EPP Appendix B INDIANA AND MICHIGAN ELECTRIC COMPANY DONALD C. COOK NUCLEAR PLANT HOSPITAL ASSISTANCE PLAN GENERAL All Company safety policies and procedures applicable to conventional generating plant operations apply to the Donald C. Cook Nuclear Plant.

In addition, special rules and procedures govern work involving radio-active material. Although measures have been taken to control radio-active contamination, its presence will require the implementation of special procedures governing the treatment of a person injured in a contaminated area. First, the person must be decontaminated unless the nature and/or extent of the injury makes immediate removal from the area and treatment necessary or requires treatment in the area.

Second, if a wound is involved, it may become contaminated with radio-active material and complete decontamination may not be possible with-out aggravating the injury.

All D. C. Cook Plant Operating Department personnel, appropriate tech-nicians and the staff have a working knowledge of decontamination pro-cedures and all Shift Operating Engineers, Chemical and Radiation Pro-tection Supervisors and Chemical and Radiation Protection Technicians have completed courses of instruction in First Aid. Normally one or more of these employees will be available to administer fi rst aid while decontamination procedures are completed.

In the event the injury endagers life or limb, immediate medical treat-ment shall always precede decontamination procedures'onsequently, provisions have been made for contamination control at Memorial Hospial in St. Joseph and Mercy Hospital in Benton Harbor.

In cooperation with Indiana & Michigan Electric Company, the partici-pating hospitals will have a staff of physicians and hospital personnel trained to implement the proper methods of contamination control.

Indiana & Michigan Electric Company will ensure that training courses are conducted to provide hospital personnel with basic knowledge of radiation and contamination, as well as control methods. Annual con-ferences and refresher classes will be conducted. Also eriodic tests runs to ensure the o erabilit of the Hos ital Assistance P an w> 1 Indiana & Michigan Electric Company will ensure the following contami-nation control supplies will be furnished to the hospitals:

1. Disposable Gowns 24 pair
2. Surgical Gloves 24 pair
3. Surgeon Caps 12 Page 1 of 6 Memorial Hospital Agreement Revision 4'
Retrieved from "https://kanterella.com/w/index.php?title=ML17324A935&oldid=2426596"