ML20138K528

Rev 9 to Ort 72, Electrical Penetration Leak Test for Unit 2

ML20138K528
Person / Time
Site:	Point Beach
Issue date:	01/25/1997
From:	WISCONSIN ELECTRIC POWER CO.
To:
Shared Package
ML20138K159	List: ML20138K155 ML20138K171 ML20138K173 ML20138K186 ML20138K203 ML20138K225 ML20138K241 ML20138K251 ML20138K255 ML20138K264 ML20138K290 ML20138K294 ML20138K299 ML20138K303 ML20138K307 ML20138K312 ML20138K318 ML20138K323 ML20138K336 ML20138K351 ML20138K358 ML20138K362 ML20138K376 ML20138K381 ML20138K387 ML20138K393 ML20138K400 ML20138K405 ML20138K410 ML20138K414 ML20138K418 ML20138K421 ML20138K424 ML20138K430 ML20138K435 ML20138K442 ML20138K447 ML20138K455 ML20138K461 ML20138K465 ML20138K470 ML20138K475 ML20138K479 ML20138K486 ML20138K491 ML20138K496 ML20138K499 ML20138K504 ML20138K510 ML20138K516 ... further results
References
ORT-72, NUDOCS 9702180405
Download: ML20138K528 (3)

Text

_ .

~

NUCLEAR POWER BUSINESS UNIT ORT 72 OPERATIONS REFUELING TESTS MINOR h Revision 9 8

ELECTRICAL PENETRATION LEAK TEST January 25,1997

,- UNIT 2 Date RECORD DSS PROCEDunt vtniritD CuantNT AND CHECKtD FOR TEMPORARY CH ANGES IF FitLD COPit5 P100! RED. USE PBF 0026: LAW NP 1.2 4 AND DOE COMPLETt THIS BLOCA BY: DATE:

1.0 PURPOSE The purpose of ORT 72 is to perform a refueling interval leakage test of Penetrations E20 and E22 in Pipeway No. 3 upper.

2.0 REFERENCES

IR 96-006, NRC Inspection Report, NRC Commitment for Operations procedure PMT/QC reviews.

3.0 PRECAUTIONS AND LIMITATIONS 3.1 Penetrations E20 and E22 may be ganged together for leak testing purposes.

3.2 All electrical penetrations must be leak tested with nitrogen.

4.0 INITI AL CONDITIONS Permission to Perform Test The conditions required by this test are consistent with required plant conditions including equipment operability. Permission is granted to perform this test.

l DSS Time Date INITIALS 5.0 PROCEDURE NOTE: Thesepenetrations must be leak tested with nitrogen.

5.1 Open the isolation valve downstream of pressure gauge for the penetration to be tested and remove the test cap.

i 5.2 Remove the pressure gauge and Whitey valve assembly. I l

'9702180405 970210 Page1of3 CONTINUOUS USE PDR ADOCK 05000301 .

P PDR -

NUCLEAR POWER BUSINESS UNIT ORT 72 OPERATIONS REFUELING TESTS MINOR Revision 9

! ELECTRICAL PENETRATION LEAK TEST January 25,1997

/ UNIT 2 INITIALS NOTE: Minimize the amount of time the leak rate tester is connected to the mechanicalpenetration.

5.3 Connect the test rig to the penetration test connection and test per 01-58. ,

5.4 Upon completion of the test, vent the penetration per 01-58.

5.5 Disconnect the test rig and replace the pressure gauge and Whitey valve assembly.

5.6 Repressurize the penetration to 15 psig. Close the isolation valve and replace the test cap.

PMT 5.7 Snoop disturbed fittings for leakage and tighten / initiate work order, as required.

6.0 EVALUATION To be completed by manager - Operations or his representative.

6.1 Individual leakages compared to allowable value and included in tabulation of total leak rate.

6.2 Results acceptable, no limits exceeded.

Yes No If no, give details in the remarks section and notify the manager -

Regulatory and Support Services to determine reportability.

6.3 Data Analyzed By:

Date:

Remarks:

Page 2 of 3 CONTINUOUS USE 9 $ I S

y NUCLEAR POWER BUSINESS UNIT ORT 72 i OPERATIONS REFUELING TESTS MINOR Revision 9 A

ELECTRICAL PENETRATION LEAK TEST January 25,1997 UNIT 2 LEAK TEST DATA SHEET Penetrations E20 and E22 Pressure Leak Rate Time (psig) (secm)

Test instrument ID Range (Circle one): Low Mid High Comments:

Test Operator Date:

a l

\

Page 3 of 3 CONTINUOUS USE I

. .