ML041940170

Inservice Inspection Report End of Cycle 16 Refueling Outage

ML041940170
Person / Time
Site:	McGuire
Issue date:	06/30/2004
From:	Gordon Peterson Duke Power Co
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML041940170 (185)

Text

Duke GARY R. PETERSON UWPoweres Vice President McGuire Nuclear Station A Duke Energy Company Duke Power MG01 VP / 12700 Hagers Ferry Road Huntersville, NC 28078-9340 704 875 5333 704 875 4809 fax grpeters@duke-energy.com June 30, 2004 U. S. Nuclear Regulatory Commission Washington, D.C. 20555-0001 ATTENTION: Document Control Desk

Subject:

McGuire Nuclear Station, Unit 1 Docket No. 50-369 Inservice Inspection Report End of Cycle 16 Refueling Outage Attached is the Inservice Inspection Report of Duke Energy Corporation's McGuire Nuclear Station Unit 1 for Outage 2/EOC 16.

This report is submitted pursuant to the filing requirements of Article IWA-6000 of Section XI of the ASME Code.

Section 4.4 of the attached report lists the limited examination item numbers. A limited examination relief request is under development and will be submitted to the NRC for review and approval in accordance with IOCFR50.55a(g)(5)(iii). This Inservice Inspection Report contains no regulatory commitment statements.

Any questions on this matter should be directed to Norman T.

Simms, Regulatory Compliance, at (704) 875-4685.

G.R. Peterson Attachment Boq/71 www.duke-energy.com

U.S. Nuclear Regulatory Commission June 30, 2004 Page 2 cc w/o att:

Mr. W.D. Travers Regional Administrator, Region II U. S. Nuclear Regulatory Commission Atlanta Federal Center, 23 T 85 61 Forsyth Street, S.W.

Atlanta, Georgia 30303 Mr. J.S. Shea, Project Manager (addressee only)

Office of Nuclear Reactor Regulation U. S. Nuclear Regulatory Commission One White Flint North, Mail Stop O-8G1 11555 Rockville Pike Rockville, MD 20852-2738 J.B. Brady NRC Senior Resident Inspector McGuire Nuclear Station

_.Pages 137 FORM NIS-1 OWNER'S DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner:Duke Energy Corporation, 526 S. Church St.. Charlotte. NC 28201-1006 (Name and Address of Owner)

2. Plant: McGuire Nuclear Station. Hiahwav 73 Cowans Ford, N.C. 28216 (Name and Address of Plant)

3. Plant Unit: 1 4. Owner Certificate of Authorization (if required) N/A

5. Commercial Service Date: December 1, 1981 6. National Board Number for Unit 44

7. Components Inspected:

Component or Manufacturer or Manufacturer or State or National Appurtenance' Installer Installer Serial Province No. Board No.

No.

See Section 1.1 in the Attached Report Note: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

FORM NIS-1 (Back)

8. Examination Dates October 11, 2002 to April 12, 2004

9. Inspection Period Identification: First period

10. Inspection Interval Identification: Third Interval

11. Applicable Edition of Section Xl 1995 Addenda 1996

12. Date/Revision of Inspection Plan: May 22, 2001 / Revision 0

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Sections 2.0, 3.0. and 6.0

14. Abstract of Results of Examinations and Tests. See Section 4.0. and 6.0

15. Abstract of Corrective Measures. See Section 4.3 We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section Xl.

Certificate of Authorization No. (if applicable) N/A Expiration Date N/A Date to// 20 e 4 Signed Duke Energy Corp. By __________a-<?-__

-6/ ~OwnerI /

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Province of AM. employed by

• HSB CT. of Connecticut have inspect d the components described in this Owners' Report during the period

. D to -1_-., OJ and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in the Owners' Report in accordance with the Inspection Plan and as required by the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, test, and corrective measures described in this Owners' Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection Commissions A/&/ Z353 0` " -

Date ______at__ National Board, State, Province, and Endorsements 20 i:

• The Hartford Steam Boiler Inspection & Insurance Company of Connecticut 200 Ashford Center North Suite 205 Atlanta, GA. 30338-4860 (800) 417-3721 www.hsbct.com I

OWNER'S REPORT FOR INSERVICE INSPECTIONS MCGUIRE UNIT 1 2004 REFUELING OUTAGE 2/EOC 16 Location: McGuire Nuclear Station Highway 73 Cowans Ford, North Carolina 28216 NRC Docket No. 50-369 National Board No. 44 Commercial Service Date: December 1, 1981 Document Completion Date: G/I17/2OOd.

Owner: Duke Energy Corporation 526 South Church St.

Charlotte, N. C. 28201-1006 Revision 0 Prepared By: U-Ikw(nr\ Date C. //0I Reviewed By: 4A co 4-th" Date 6&I(1°oq-Approved By: Date b4- 1

DISTRIBUTION LIST

1. Duke Energy Corporation Nuclear Assurance Division Quality Assurance Technical Services

2. Inspection and Welding Services (ISI Coordinator)

3. NRC Document Control Desk

4. Hartford Steam Boiler Inspection and Insurance Corporation of Connecticut (AIA) c/o ANII. At McGuire

5. State of North Carolina Department of Labor c/o J. M. Givens, Jr.

6. Nuclear GO Nuclear Assurance c/o Bruce Nardoci

TABLE OF CONTENTS Section Title Revision 1.0 General Information 0 2.0 Third Ten-Year Interval Inspection Status 0 3.0 Final Inservice Inspection Plan 0 4.0 Results of Inspections Performed 0 5.0 Owner's Report for Repair/ Replacement Activities 0 6.0 Pressure Testing 0

1.0 General Information This report describes the Inservice Inspection of Duke Energy Corporation's McGuire Nuclear Station Unit 1 during Outage 2/ EOC 16. This is the second outage of the First Inspection Period of the Third Ten-Year Interval. ASME Section XI, 1995 Edition through the 1996 Addenda was the governing Code for selection and performance of the ISI examinations.

Included in this report are the inspection status for each examination category, the final inservice inspection plan, the inspection results for each item examined, and corrective action(s) taken when reportable conditions were found. In addition, there is an Owners Report for Repair / Replacement section included for complete NIS-2 documentation of repairs and replacements.

1.1 IdentificationNumbers Manufacturer National Manufacturer or Installer State or Board Item or Installer Serial No. Province No. No.

Reactor Vessel Combustion CE67102 NC-178379 20766

._ Enqineering Pressurizer Westinghouse 1471 NC-178395 68-123 Steam Generator 1A BWI 7701-04 NC-302668 157 Steam Generator 1B BWI 7693-01 NC-302669 146 Steam Generator 1C BWI 7701-03 NC-302670 155 Steam Generator 1D BWI 7701-02 NC-302671 154 Centrifugal Pacific Pumps 1A-48582 N/A 19 Charging Pump 1B-48583 22 Containment Spray Heat Delta Southern Co. 1A-35005-73-1 NC-1 47799 3394 Exchanger 1B-35005-73-2 NC-147796 3395 Outage 2/EOC 16 Refueling Outage Report Page 1 of 6 McGuire Unit 1 Revision 0 Section 1 June 14, 2004

1.1 Identification Numbers Continued Manufacturer National Manufacturer or Installer State or Board Item or Installer Serial No. Province No. No.

Excess Letdown Heat Atlas Industrial 1809 NC-187817 1554 Exchanger Manufacturing Company Letdown Heat Exchanger Joseph Oat & Sons, Inc. 2049-2A NC-187881 552 Reciprocating Charging Union Pump Company N721031 B-603 N/A N/A P um p _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

1A 1-114E841G01 Reactor Coolant Pump Westinghouse lB 2-114E841G01 N/A N/A 1C 3-114E841 G01 1D 4-114E841 G01 Reciprocating Charging Metal Bellows Company 74730-001 N/A 001 Pump Accumulator Reciprocating Charging Richmond Engineering N-2409.10 N/A 75219 Pump Suction Stabilizer Supply Co.

Residual Heat Joseph Oat & Sons, Inc. 1A-2046-2A NC-234202 635 Removal Heat 1B-2046-2A NC-234201 636 Exchanger Safety Injection Pump Pacific Pumps 1A-49355 N/A 80 1B-49356 81 Regenerative Heat Joseph Oat & Sons, Inc. 2047-2A NC-1 87897 595 Exchanger 596 597 Seal Water Heat Atlas Industrial 1766 NC 169797 1548 Exchanger Manufacturing Company Seal Water AMF Cuno 1A-13 N/A 3822 Injection Filter 11B-14 3823 Outage 2/EOC 16 Refueling Outage Report Page 2 of 6 McGuire Unit 1 Revision 0 Section 1 June 14, 2004

1.1 Identification Numbers Continued Manufacturer National Manufacturer or Installer State or Board Item or Installer Serial No. Province No. No.

Main Steam Supply to Duke Power Co. SA N/A 4 Auxiliary Equipment System Containment Air Release Duke Power Co. VO N/A 12 and Addition System _

Main Steam System Duke Power Co. SM N/A 17 Main Steam Vent to Duke Power Co. SV N/A 18 Atmosphere System Reactor Coolant System Duke Power Co. NC N/A 28 Liquid Waste Recycle Duke Power Co. WL N/A 29 System Refueling Water System Duke Power Co. FW N/A 31 Auxiliary Feedwater Duke Power Co. CA N/A 32 System Residual Heat Removal Duke Power Co. ND N/A 35 System Nuclear Service Water Duke Power Co. RN NIA 36 System Chemical & Volume Duke Power Co. NV N/A 37 Control System Component Cooling Duke Power Co. KC N/A 38 System Main Feedwater System Duke Power Co. CF N/A 39 Containment Spray Duke Power Co. NS N/A 40 System Outage 2/EOC 16 Refueling Outage Report Page 3 of 6 McGuire Unit 1 Revision 0 Section 1 June 14, 2004

1.1 Identification Numbers Continued Manufacturer National Manufacturer or Installer State or Board Item or Installer Serial No. Province No. No.

Containment Ventilation Duke Power Co. RV N/A 41 Cooling Water System Safety Injection System Duke Power Co. NI N/A 42 Containment Purge Duke Power Co. VP N/A 6 Ventilation Safety Injection Delta Southern Co. 41617-72-1 NC-178396 3038 Accumulator Tank 1A Safety Injection Delta Southern Co. 41617-72-2 NC-178397 3039 Accumulator Tank 1B Safety Injection Delta Southern Co. 41617-72-3 NC-178398 3040 Accumulator Tank 1C Safety Injection Delta Southern Co. 41617-72-4 NC-1 78399 3041 Accumulator Tank 1D Unit 1 Duke Power Co. N/A N/A 44 1.2 Personnel, Equipment and Material Certifications All personnel who performed or evaluated the results of inservice inspections during the time frame bracketed by the examination dates shown on the NIS-1 Form were certified in accordance with the requirements of the 1995 Edition of ASME Section Xl with the 1996 Addenda including Appendix VII for ultrasonic inspections. In addition, ultrasonic examiners were qualified in accordance with ASME Section Xl, Appendix Vill, and 1995 Edition with the 1996 Addenda through the Performance Demonstration Initiative (PDI) for similar metal piping welds.

The appropriate certification records for each inspector, calibration records for inspection equipment, and records of materials used (i.e. NDE consumables) are on file at McGuire Nuclear Station or copies may be obtained by contacting the Duke Energy's Corporate Office in Charlotte, North Carolina.

Outage 2/EOC 16 Refueling Outage Report Page 4 of 6 McGuire Unit 1 Revision 0 Section 1 June 14, 2004

1.3 Reference Documents The following reference documents apply to the inservice inspections performed during this report period. A copy may be obtained by contacting the ISI Plan Manager at Duke Energy's Corporate Office in Charlotte, North Carolina:

1. RFR 01-004 (Class 1, 2 and 3 snubber examination under station technical specification)

2. RFR 01-005 (Risk Informed Inservice Inspection Program Submittal)

3. RFR 01-008 (Risk Informed ISI Alternative to Use VT-2 Instead of Volumetric Examination of Socket Welds)

4. Code Case N-460 (Alternative Examination Coverage For Class 1 and Class 2 Welds)

5. RFR-01-GO-002 to use Code Case N-416-2 "Alternative Pressure Test Requirement for Welded Repairs, Fabrication Welds for Replacement Parts and Piping Subassemblies, or Installation of Replacement Items by Welding, Class 1, 2 and 3 Section Xi, Division 1."

1.4 Augmented and Elective Examinations Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section Xl Code; therefore, it is exempt from ANII review, verification, and/or record certification.

Outage 2/EOC 16 Refueling Outage Report Page 5 of 6 McGuire Unit 1 Revision 0 Section 1 June 14, 2004

1.5 Responsible Inspection Agency The Hartford Steam Boiler Inspection and Insurance Company of Connecticut is responsible for the third party inspections required by ASME Section Xl.

Authorized Nuclear Inservices Inspectior~s)

Name: R. D. Klein and J. F. Swan Employer: The Hartford Steam Boiler Inspection & Insurance Company of Connecticut Business 200 Ashford Center North Address: Suite 205 Atlanta, GA 30338-4860 (800) 417-3721 www.hsbct.com Outage 2/EOC 16 Refueling Outage Report Page 6 of 6 McGuire Unit 1 Revision 0 Section 1 June 14, 2004

2.0 Third Ten-Year IntervalInspection Status The completion status of inspections required by the 1995 ASME Code Section XI through the 1996 Addenda is summarized in this section. The requirements are listed by the ASME Section Xl Examination Category as defined in Table IWB-2500-1 for Class 1 Inspections, Table IWC-2500-1 for Class 2 Inspections and IWF-2500-1 for Class 1, 2, and 3 Component Supports. Augmented and Risk Informed inspections are also included.

During the McGuire Third 10 Year Interval piping welds will be examined under the Risk Informed Inservice Inspection program developed in accordance with methodology contained in the Westinghouse Owners Group (WOG) Topical Report, WCAP-14572, Revision 1-NP-A. Request for Relief 01-005 was submitted to the NRC seeking approval to incorporate the Risk Informed Program into the Third 10 Year Interval ISI Plan for McGuire Unit 1. The NRC approved use of this program per SER dated June 12, 2002. Previous code examination Categories B-F, B-J, C-F-1, and C-F-2 will now be combined under the new Risk Informed Category R-A.

• _ _ Class 1 Inspections Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed B-A Pressure Retaining Welds 28 5 17.85% Yes in Reactor Vessel _

B-B Pressure Retaining Welds 5 1 20.00% No in Vessels Other than Reactor Vessel B-D Full Penetration Welded 36 10 27.77% Partial Nozzles in Vessels Inspection Program B B-F Pressure Retaining Reference Dissimilar Metal Welds in Risk Vessel Nozzles Informed Program R01. Items B-G-1 Pressure Retaining Bolting 243 82 33.74% No Greater than 2 " in Diameter Outage 2/EOC 16 Refueling Outage Report Page 1 of 5 McGuire Unit 1 Revision 0 Section 2 June 14, 2004

Class 1 Inspections (Continued)

.6 Examination Description Inspections Inspections Percentage 6Deferral Category Required Completed Completed Allowed B-G-2 Pressure Retaining 15 4 26.66% No Bolting 2" and Less in Diameter B-J Pressure Retaining Welds Reference in Piping Risk Informed Program

_ 01. Items B-K Integral Attachments for 6 2 33.33% No Piping, Pumps and Valves _

B-L-1 Pressure Retaining Welds N/A N/A N/A Yes in Pump Casings B-L-2 Pump Casings 1 0 0.00% Yes B-M-1 Pressure Retaining N/A N/A N/A Yes Welds in Valve Bodies B-M-2 Valve Body > 4 in. 7 3 42.85% Yes Nominal Pipe Size B-N-1 Interior of Reactor Vessel 3 1 33.33% No B-N-2 Integrally Welded Core Support Structures and 2 0 0.00% Yes Interior Attachments to Reactor Vessels B-N-3 Removable Core Support 1 0 0.00% Yes Structures B-0 Pressure Retaining Welds 3 1 33.33% Yes in Control Rod Housings Outage 2/EOC 16 Refueling Outage Report Page 2 of 5 McGuire Unit 1 Revision 0 Section 2 June 14, 2004

Class 1 Inspections (Continued)

Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed B-P All Pressure Retaining REFERENCE SECTION 6.0 OF THIS REPORT Components B-Q Steam Generator Tubing See Note Below F-A Class 1 Component 68 22 32.35% No F01.01 0 Supports Note: Steam Generator Tubing is examined and documented by the Metallurgy and Lab Services Section/Nuclear Technical Services Division as required by the Station Technical Specifications and Is not Included in this report.

6 Deferral of Inspection to the end of the Interval as allowed by ASME Section Xl Tables IWB 2500-1.

These examination categories are exempt from percentage requirements per IWB-2412 (a),

Inspection Program B.

Outage 2/EOC 16 Refueling Outage Report Page 3 of 5 McGuire Unit 1 Revision 0 Section 2 June 14, 2004

Class 2 Inspections Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed C-A Pressure Retaining Welds 26 6 23.07% No in Pressure Vessels .

C-B Pressure Retaining Nozzle 9 2 22.22% No Welds in Vessels C-C Integral Attachments for 32 10 31.25% No Vessels, Piping, Pumps and Valves C-D Pressure Retaining Bolting N/A N/A N/A N/A Greater Than 2" in Diameter C-F-1 Pressure Retaining Welds Reference in Austenitic Stainless Risk Informed Steel or High Alloy Piping Program R01.

C-F-2 Pressure Retaining Welds Reference in Carbon or Low Alloy Risk Informed Steel Piping Program R01.

Items C-G Pressure Retaining Welds 3 1 33.33% No in Pumps and Valves C-H All Pressure Retaining REFERENCE SECTION 6.0 OF THIS REPORT Components F-A Class 2 Component 226 73 32.30% No F01.020 Supports Outage 2/EOC 16 Refueling Outage Report Page 4 of 5 McGuire Unit 1 Revision 0 Section 2 June 14, 2004

Additional Component Support Examinations Class 1, 2 & 3 Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed F-A Supports other than Piping 45 14 31.11% No F01.040 Supports Class 1, 2 & 3 1 1 1 F01.050 Component Supports, No

______ ___ Snubbers Class 1, 2 & 3 __ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _

6 Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB-2500-1 and IWC-2500-1.

• Examinations to be performed per Request for Relief 01-004 Risk Informed Inservice Inspection Program Class 1 and 2 Augmented Inspections Description Percentage Complete Reactor Coolant Pump Flywheels (Item No. Series No Examinations required for G01.) Outage 2/ EOC-16 Pipe Rupture Protection (Item No. Series G03.) No Examinations required for Outage 2 / EOC-16 Reactor Vessel Head to Pipe Welds (Item No. No Examinations required for Series G04.) Outage 2 / EOC-16 Bare Metal Inspections (Item No. Series GO5.) No Examinations required for Outage 2 / EOC-1 6 Outage 2/EOC 16 Refueling Outage Report Page 5 of 5 McGuire Unit 1 Revision 0 Section 2 June 14, 2004

3.0 FinalInservice Inspection Plan The final Inservice Inspection Plan shown in this section lists all ASME Section XI Class 1, Class 2, Class 3, Augmented and Risk Informed examinations credited for this report period.

The information shown below is a field description for the reporting format included in this section of the report:

ITEM NUMBER = ASME Section Xl Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2 ), Augmented and Risk Informed Requirements ID NUMBER - Unique Identification Number SYS - Component System Number ISO/DWG NUMBERS = Location and/or Detail Drawings PROC = Examination Procedures INSP REQ. = Examination Technique - Magnetic Particle, Dye Penetrant, etc.

MAT / SCH = General Description of Material DIA / THICK = Diameter/Thickness CAL BLOCKS = Calibration Block Number COMMENTS = General and/or Detail Description Outage 2/EOC 16 Refueling Outage Report Page 1 of 1 McGuire Unit 1 Revision 0 Section 3 June 14, 2004

EOC 16 DUKE ENEhAY CORPORATION CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report IHead Welds McGuire I Page 1 InservIce Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Merldlonal ****

B01.022.001 IRPV 1-446A MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 See Comm 7.300 50236A MERIDIONAL WELD Class A APPROX. 36 DEG.

DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-6 MAY BE USED IN LIEU OF PROCEDURE NDE-620.

B01.022.002 1RPV 1-446B MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 See Comm 7.300 50236A MERIDIONAL WELD Class A APPROX. 108 DEG.

DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-6 MAY BE USED INLIEU OF PROCEDURE NDE-620.

B01.022.003 1RPV 1-446C MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 See Comm 7.300 50236A MERIDIONAL WELD Class A APPROX.180 DEG.

DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-6 MAY BE USED INLIEU OF PROCEDURE NDE-620.

Total B01.022 Items: 3 Total B01 Items: 3

EOC 16 DUKE ENE... I CORPORATION CATEGORY B-B, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report McGuire I Page 2 Pressurizer Inservice Inspection Plan for Interval 3 Outage 2 05/1812004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Shell-to-Head; Circumferential ****

B02.011.002 1PZR-5 MCM 1201.01-170 NDE-640 UT CS 91.500 50337 PRESSURIZER CIRCUMFERENTIAL WELD.

Circumferential MCM 1201.01-171 NDE-820 3.750 Class A PZR Upper Head to Shell Total B02.011 Items: 1 Total B02 Items: 1 C

EOC 16 DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 3 Inservice InspectIon Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG iNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

"** Nozzle-to-Vessel Welds 803.110.002 1PZR-12 MCM 1201.01-170 NDE-640 UT CS 12.750 50338 PRESSURIZER SPRAY NOZZLE TO UPPER CircumferentIal MCM 1201.01-171 NDE-820 1.900 HEAD.

Class A 803.110.005 1PZR-15 MCM 1201.01-170 NDE-640 UT CS 15.000 50338 PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential MCM 1201.01-171 NDE-820 1.900 HEAD (X-Y AXIS).

Class A B03.110.006 1PZR-16 MCM 1201.01-170 NDE-640 UT CS 15.000 50338 PRESSURIZER RELIEF NOZZLE TO UPPER Circumferential MCM 1201.01-171 NDE-820 1.900 HEAD.

Class A Total B03.110 Items: 3

EOC 16 DUKE ENEHUY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWC GNUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section ****

B03.120.002 1PZR-12R MCM 1201.01-170 NDE-680 UT CS 12.750 50338 PRESSURIZER SPRAY NOZZLE TO UPPER HEAD Circumferential MCM 1201.01-171 1.900 50237D INSIDE RADIUS Class A B03.120.005 1PZR-15R MCM 1201.01-170 NDE-680 UT CS 15.000 50338 PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential MCM 1201.01-171 1.900 50237D HEAD INSIDE RADIUS (X Y AXIS)

Class A B03.120.006 1PZR-16R MCM 1201.01-170 NDE-680 UT CS 15.000 50338 PRESSURIZER RELIEF NOZZLE TO UPPER Circumferential MCM 1201.01-171 1.900 50237D HEAD INSIDE RADIUS Class A Total B03.120 Items: 3

EOC 16 DUKE ENEhY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report ESteam Generators (Primary Side) McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 2 05/1812004 ITEM NUMBER IDNUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS

• • ' Nozzle Inside Radius Section ****

B03.140.001 1SGA-INLET MOM 1201.01-0782 NDE-680 UT CS 0.000 50235 STEAM GENERATOR IA Circumferential MCM 1201.01-0769 6.500 INLET NOZZLE Class A RADIUSED SECTION B03.140.002 1SGA-OUTLET MCM 1201.01-0782 NDE-680 UT CS 0.000 50235 STEAM GENERATOR 1A Circumferential MCM 1201.01-0769 6.500 OUTLET NOZZLE RADIUSED SECTION Class A 803.140.007 1SGD-INLET MCM 1201.01-0782 NDE-680 UT CS 0.000 50235 STEAM GENERATOR ID Circumferential MCM 1201.01-0769 6.500 INLET NOZZLE Class A RADIUSED SECTION B03.140.008 1SGD-OUTLET MCM 1201.01-0782 NDE-680 UT CS 0.000 50235 STEAM GENERATOR ID Circumferential MCM 1201.01-0769 6.500 OUTLET NOZZLE RADIUSED SECTION Class A Total B03.140 Items: 4 Total B03 Items: 10

EOC 16 DUKE ENEnUY CORPORATION CATEGORY B-G-2. Pressure Retaining Bolting. 2 INSERVICE INSPECTION PLAN MANAGEMENT In. And Less In Diameter Inservice Inspection Database Management System Plan Report NPressurizer McGuire I Page 6 N Inservice Inspection Plan for Interval 3 Outage 2 0511812004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ***

B07.020.001 IPZR-MWB MCM 1201.01.170 OAL-13 VT-1 CS 1.880 PRESSURIZER MANWAY BOLTING 16 BOLTS MCM 1201.01-171 7.500 MCM 1201.01-140 Total B07.020 Items: 1

EOC 16 DUKE ENEhXY CORPORATION CATEGORY B-G-2. Pressure Retaining Bolting. 2 INSERVICE INSPECTION PLAN MANAGEMENT In. And Less In Diameter Inservice Inspection Database Management System Plan Report IRmOs McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISOtDWG NUMBERS PROC INSP REQ MAT/SCH DlMJTHK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.060.003 1RCP-1C.S MCM 1201.01-120 QAL.13 VT-1 CS 2.000 ..... SEAL GLAND BOLTING MCFD 1553-01.00 8.000 12 BOLTS PC. 15 Class A B07.060.007 1RCP-1C-H MCM 1201.01-120 QAL-13 VT-1 CS 1.000 SEAL HOUSING BOLTING MCFD 1553.01.00 3.250 12 BOLTS PC. 66 Class A Total B07.060 Items: 2

EOC 16 DUKE ENE&.f CORPORATION CATEGORY B-G-2. Pressure Retaining Bolting, 2 INSERVICE INSPECTION PLAN MANAGEMENT in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 8 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIArTHK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.070.061D 1NI-93 MCM 1205.36-0011 QAL-13 VT-1 SS 1.875 10' VALVE, MCFI-1NI86 MCFD 1562.02.01 0.000 INSPECT ONLY ONE VALVE INTHIS GROUP Class A (61A.61H) PER INTERVAL ITEM # 4J.055 Total B07.070 Items: 1 Total B07 Items: 4

EOC 16 DUKE ENEhK-x CORPORATION CATEGORY B-K, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report IENessure Vessels McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER IDNUMBER SYS IiSO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments B10.010.002 1PZR-W13A MCM 1201.01-170 NDE-25 MT CS 6.000 Y-Z QUADRANT MCM 1201.01 0048 NDE-35 4.000 ITEM # CHANGED FROM B08.020.002 DUE TO Class A MCM 1201.01-140 PZR Seismic Lug to CODE CHANGE Shell PT MAY BE USED INLIEU OF OR IN CONJUNCTION WITH MT EXAMINATION PER INSPECTORS DECISION B10.010.003 1PZR-W13B MCM 1201.01-170 NDE-25 MT CS 6.000 Y-X QUARANT MCM 1201.01-0048 NDE-35 4.000 ITEM # CHANGED FROM B08.020.003 DUE TO Class A MCM 1201.01-140 PZR Seismic Lug to CODE CHANGE Shell PT MAY BE USED INLIEU OF OR IN CONJUNCTION WITH MT EXAMINATION PER INSPECTORS DECISION Total B10.010 Items: 2 Total B10 Items: 2

EOC 16 DUKE ENEh-Y CORPORATION CATEGORY B-M-2. Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 2 05/1812004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS Valve Body, Exceeding NPS 4 B12.050.001B 1NC-2 MCM 1205.09.0001 OAL-14 VT-3 SS 6.000 MCFI-1NC5 MCFD-1553-02.00 0.000 CROSBY RELIEF VALVE INSPECT ONE VALVE IN Class A THIS GROUP (1A-1C) PER INTERVAL.INSPECT ONLY IF DISASSEMBLED. ITEM # 1NC-0002 B12.050.004F 1NI-82 MCM 1205.36-0010 OAL-14 VT-3 SS 10.000 MCFI.1N187 MCFD-1 562-02.01 0.000 ATWOOD-MORRILL CHECK VALVE Class A INSPECT ONE VALVE INTHIS GROUP (4A-4H)

PER INTERVALINSPECT ONLY IF DISASSEMBLED. ITEM # 4J-054 B12.050.004H 1NI-94 MCM 1205.36-0010 QAL.14 VT-3 SS 10.000 MCFI-1N186 MCFD-1562-02.01 0.000 ATWOOD-MORRILL CHECK VALVE Class A INSPECT ONE VALVE INTHIS GROUP (4A-4H)

PER INTERVAL.INSPECT ONLY IF DISASSEMBLED. ITEM # 4J.054 B12.050.006A INI-126 MCM 1205.00-0005 OAL-14 VT-3 SS 6.000 MCFI-INI53 MCFD-1562-03.00 0.000 CRANE-ALOYCO CHECK VALVE Class A INSPECT ONE VALVE INTHIS GROUP (6A-6F)

PER INTERVAL. INSPECT ONLY IF DISASSEMBLED. ITEM # 4J-008 Total B12.050 Items: 4 Total B12 Items: 4

EOC 16 DUKE ENEHuY CORPORATION CATEGORY B-N-1, Interior Of Reactor Vessel INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report EReactor Vessel McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Vessel Interior****

B13.010.001 I RPV-INTERIOR MCM 1201.01-146 QAL-14 VT-3 SS 0.000 AREA ABOVE AND BELOW CORE MADE MCM 1201.01-223 0.000 ACCESSIBLE DURING REFUELING OUTAGES.

Class A INSPECT ONCE EACH INSPECTION PERIOD Total B13.010 Items: 1 Total B13 Items: 1

EOC 16 DUKE ENERG.AY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

• Shell Circumferential Welds McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 N.

ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS C01.010.040 IELDHX-SH-FLG MC-ISIN-1554-01.02 NDE-330 UT CS 8.625 50327 EXCESS LETDOWN HEAT EXCHANGER (SHELL Circumferential NV MCM 1201.06-0010 0.322 TO FLANGE). THIS EXAMINATION WILL BE Class B Shell to PERFORMED USING PROCEDURE NDE-630 Flange DURING OUTAGE 2 TO MEET THE REQUIREMENTS FOR THE SECOND INSPECTION INTERVAL. REFERENCE PIP M-03-2452.

C01.010.090 1RCPA-8-1 MCM 1201.04-197 NDE-330 UT SS 6.660 50319 RECIPROCATING CHARGING PUMP Circumferential 0.495 ACCUMULATOR Class B Flange to Shell C01.010.100 1ASWINJF-1 MCM 1201.04-27 NDE-330 UT SS 4.000 50424 SEAL WATER INJECTION FILTER 1A Circumferential 0.438 Class B Shell to Upper flange C01.010.101 1ASWINJF-2 MCM 1201.04-27 NDE-330 UT SS 4.000 50424 SEAL WATER INJECTION FILTER 1A Circumferential 0.438 Class B Shell to Lower flange Total C01.010 Items: 4

EOC 16 DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retalnina Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

• Head Circumferential Welds McGuire I Page 13 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REO MAT/SCH DIANTHK CAL BLOCKS COMMENTS C01.020.020 1ELDHX-SH-HD MC-ISIN-1554-01.02 NDE-330 UT CS 8.625 50327 EXCESS LETDOWN HEAT EXCHANGER (SHELL Circumferential NV MCM 1201.06-0010 0.322 TO HEAD). THIS EXAMINATION WILL BE Class B Shell to PERFORMED USING PROCEDURE NDE-630 Head DURING OUTAGE 2 TO MEET THE REQUIREMENTS FOR THE SECOND INSPECTION INTERVAL. REFERENCE PIP M.03-2452.

C01.020.021 1ELDHX-HD-FLG MC-ISIN-1554-01.02 NDE-330 UT SS-CS 9.500 CB0803 EXCESS LETDOWN HEAT EXCHANGER (HEAD Circumferential NV MCM 1201.06.0010 0.750 50210 TO FLANGE), CS WITH 3116' TYPE 304 SS Class B Head to CLADDING ON FLANGE SIDE OF WELD. THIS Flange EXAMINATION WILL BE PERFORMED USING PROCEDURE NDE-630 DURING OUTAGE 2 TO MEET THE REQUIREMENTS FOR THE SECOND INSPECTION INTERVAL REFERENCE PIP M-03-2452.

C01.020.080 1RCPA-10-1 MCM 1201.04-197 NDE-330 UT SS 6.660 50319 RECIPROCATING CHARGING PUMP Circumferential 0.495 ACCUMULATOR Class B Shell to Head Total C01.020 Items: 3 Total C01 Items: 7

EOC 16 DUKE ENE. .CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report TPressureRVessels McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.010.003 1RCPSS-SUPP MCM 1201.04-272 NDE-35 PT SS 12.000 RECIPROCATING CHARGING PUMP SUCTION NV 0.375 STABLIZER SUPPORT Class B WELDED ATTACHMENT EXAMINED OUTAGE 21EOC-16 AS ADDITIONAL SAMPLE FOR ITEM NUMBER C03.010.005 C03.010.005 1ELDHX-SUPPORT MC-ISIN-1554-01.02 NDE-25 MT Cs 0.000 EXCESS LETDOWN HEAT EXCHANGER NV MCM 1201.06-0010 NDE-35 0.375 SUPPORT Class B (2WELDED ATTACHMENTS). THIS EXAMINATION WILL BE PERFORMED DURING OUTAGE 2 TO MEET THE REQUIREMENTS FOR THE SECOND INSPECTION INTERVAL.

REFERENCE PIP M-03-2452.

PT MAY BE USED IN LIEU OF OR IN CONJUNCTION WITH MT EXAMINATION PER INSPECTORS DECISION Total C03.010 Items: 2

EOC 16 DUKE ENEhAY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report i~llna McGuire I Page 15 N Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.020.022 1-MCA-ND.H16 MCSRD-NDA/sht. 5 NDE-35 PT SS 8.000 WELDED ATTACHMENT Rigid Restraint ND 1.000 Class B C03.020.026 1-MCA-ND-H24 MCSRD-NDA/sht. 2 NDE-35 PT SS 8.000 WELDED ATTACHMENT Spring Hgr ND 0.125 Class B C03.020.032 1-MCA-NI-H278 MC.1190.NV-01-01 NDE-35 PT SS 4.000 WELDED ATTACHMENT Rigid Restraint NI 0.125 Class B C03.020.045 1 MCA-NS-H87 MCSRD-NSB/sht. 1 NDE-35 PT SS 10.000 WELDED ATTACHMENT Rigid Restraint NS 0.125 Class B C03.020.051 1-MCA-NV-H321 MCSRD-NVAlsht. 3 NDE-35 PT SS 3.000 WELDED ATTACHMENT Spring Hgr NV 0.125 Class B C03.020.052 1-MCA-NV-H322 MCSRD-NVA/sht. 3 NDE-35 PT SS 3.000 WELDED ATTACHMENT Spring Hgr NV 0.125 Class B Total C03.020 Items: 6 Total C03 Items: 8

EOC 16 DUKE ENEHuY CORPORATION CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire I Page 16 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DW( 3INUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.010.001 1CBD-SUPPORT MCM 1201.09-0004 OAL-13 VT-1 NA 0.000 CATION BED DEMINERALIZER WELDED NV 0.000 ATTACHMENT Class C D01.010.002 1MBD-SUPPORT-1A MCM 1201.09.0006 OAL-13 VT-1 NA 0.000 MIXED BED DEMINERALIZER 1A WELDED NV 0.000 ATTACHMENT Class C D01.010.004 ILDT-SUPPORT-lA MCM 1218.04-0003 QAL-13 VT-1 NA 0.000 1A DIESEL GENERATOR LUBE OIL FILTER LD 0.000 WELDED ATTACHMENT Class C Total D01.010 Items: 3

EOC 16 DUKE ENEh-JY CORPORATION CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report IENina McGuire 1 Page 17 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER IDNUMBER SYS ISOIDW(3 NUMBERS PROC INSP REQ MAT/SCH DIArTHK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.020.081 1-MCA-SA-H42 MCSRD-SAA/sht.3 QAL-13 VT-1 CS 6.000 WELDED ATTACHMENT Rigid Support SA 0.500 Class C Total D01.020 Items: 1 Total D01 Items: 4

EOC 16 DUKE ENE...Y CORPORATION CATEGORY F-A. Surmorts INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report ECIass 1 PplngSupports McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 2 05118/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ****

F01.010.006B 1-MCR-NC-544 MCSRD-NC-03/sht. 2 OAL-14 VT-3 NA 6.000 Rigid Restraint NC 0.000 Class A F01.010.010C 1-MCR-NC-564 MCSRD-NC-03/sht. 1 OAL-14 VT-3 NA 4.000 Hyd Snubber NC 0.000 Class A F01.010.011C I-MCR-NC-565 MCSRD-NC-03/sht. 2 OAL-14 VT-3 NA 6.000 Hyd Snubber NC 0.000 Class A F01.010.012C 1-MCR-NC-566 MCSRD-NC-03/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber NC 0.000 Class A F01.010.024C 1-MCR-NC-801 MCSRD-NI-131sht.2 QAL-14 VT-3 NA 1.500 Hyd Snubber NC 0.000 Class A F011.0110.052B 1-MCR-ND-505 MCSRD-ND-01/sht. 1 OAL-14 VT-3 NA 14.000 Rigid Restraint ND 0.000 Class A F01.010.105C 1-MCR-NI-531 MCSRD-NI-01/sht. 3 OAL-14 VT-3 NA 10.000 Mech Snubber NI 0.000 Class A F01.010.106B 1-MCR-NI-534 MCSRD-NI-01/sht. 3 QAL-14 VT-3 NA 10.000 Rigid Restraint NI 0.000 Class A

EOC 16 DUKE ENEHiUY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Icass 1 Piping Supports McGuire 1 Page 19 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.010.115C 1-MCR-NI-611 MCSRD-NI-01/sht.3 QAL-14 VT-3 NA 10.000 Spring Hgr NI 0.000 Class A F01.010.116A 1.MCR-NI-614 MCSRD-NI-01/sht. 1 OAL-14 VT-3 NA 6.000 Rigid Support NI 0.000 Class A F01.010.153C 1-MCR-NV-852 MCSRD-NV.06/sht. 1 OAL-14 VT-3 NA 2.000 Hyd Snubber NV 0.000 Class A Total F01.010 Items: 11

EOC 16 DUKE ENEhJY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Cass 2 Piplna Supports McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 2 05/1812004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS tett "A", One-Dlrectlonal, "B", Multi-Directional, "C", Thermal Movement F01.020.011A 1-MCA-CA-H429 MCSRD-CAO/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support CA 0.000 Class B F01.020.012A 1-MCA-CA-H457 MCSRD-CAO/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Support CA 0.000 Class B F01.020.156A 1-MCA-ND-H29 MCSRD-NDA/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.000 Class B F01.020.158A 1-MCA-ND-H64 MCSRD-NDA/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.000 Class B F01.020.162C 1-MCA-ND-H82 MCSRD-NDA/sht. 3 QAL-14 VT-3 NA 8.000 Spring Hgr ND 0.000 Class B F01.020.167C 1-MCA-ND-H247 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 14.000 Hyd Snubber ND 0.000 Class B F01.020.184B 1-MCA-ND-H264 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint ND 0.000 Class B F01.020.185B 1-MCA-ND.H16 MCSRD-NDA/sht. 5 QAL-14 VT-3 NA 8.000 Rigid Restraint ND 1.000 Class B

EOC 16 DUKE ENE-..Y CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report E~! ss2 Pipfingupports McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 2 05118/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.186B 1-MCA-ND-H335 MCSRD-NIO/sht. 1 QAL-14 VT-3 NA 18.000 Rigid Restraint ND 0.750 Class B F01.020.187C 1 MCA-ND-H24 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Spring Hgr ND 0.125 Class B F01.020.214A 1-MCR-NI-696 MCSRD-NI-11/sht. I OAL-14 VT-3 NA 2.000 Rigid Support NI 0.000 Class B F01.020.215A 1-MCR-NI-H240 MCSRD-NIO/sht. 1 QAL-14 VT-3 NA 24.000 Rigid Support NI 0.000 Class B F01.020.216A 1-MCR-NI-698 MCSRD-NI-11/sht. 1 OAL-14 VT.3 NA 2.000 Rigid Support NI 0.000 Class B F01.020.219B 1-MCR-NI-708 MCSRD-NI-1 1/sht. 1 OAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B F01.020.220B 1-MCR-NI-712 MCSRD-NI- 1/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B F01.020.221B 1-MCR-NI-713 MCSRD-NI-11/sht. 1 OAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B F01.020.235B 1-MCA-NI-H278 MC-1190-NV-01-01 QAL-14 VT-3 NA 4.000 Rigid Restraint NI 0.125 Class B

EOC 16 DUKE ENE&..d CORPORATION CATEGORY F-A, Sunports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report QWCIas PpngMSuprts McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.236A I-MCR-NI.501 MCSRD-Nit01/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NI 0.000 Class B F01.020.255A 1 MCA-NS-H13 MCSRD-NSB/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.256A 1-MCA-NS.H17 MCSRD-NSA/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.257A 1-MCA-NS-H22 MCSRD-NSA/sht. I OAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.258A 1-MCA-NS-H25 MCSRD-NSAlsht. 2 OAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.259C 1-MCA-NS-H28 MCSRD-NSAlsht. 2 OAL.14 VT-3 NA 10.000 Spring Hgr NS 0.000 Class B F01.020.278B 1-MCA-NS.H87 MCSRD-NSB/sht. 1 OAL-14 VT-3 NA 10.000 Rigid Restraint NS 0.125 Class B F01.020.280B 1-MCR-NS-501 MCSRD-NS-01/sht. 1 OAL.14 VT-3 NA 8.000 Rigid Restraint NS 0.000 Class B F01.020.281B 1-MCR-NS-502 MCSRD-NS-01/sht. I OAL-14 VT-3 NA 8.000 Rigid Restraint NS 0.000 Class B

EOC 16 DUKE ENEht;Y CORPORATION CATEGORY F-A. Suonorts INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report E~as 2Piping Suports McGuire I Page 23 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS F01.020.309A 1-MCA-NV*H15 MCSRD-NVD/sht. 3 QAL-14 VT-3 NA 6.000 Rigid Support NV 0.125 Class B F01.020.310A 1-MCA-NV-H16 MCSRD-NVD/sht. 3 OAL-14 VT-3 NA 6.000 Rigid Support NV 0.000 Class B F01.020.311C 1-MCA-NV.H17 MCSRD-NVD/sht. 3 QAL-14 VT-3 NA 6.000 Spring Hgr NV 0.000 Class B F01.020.312B 1-MCA-NV-H585 MCSRD-NVA/sht. 1 QAL-14 VT-3 NA 3.000 Rigid Restraint NV 0.000 Class B F01.020.313B 1-MCA-NV-H588 MCSRD-NVA/sht. 5 QAL-14 VT-3 NA 3.000 Rigid Restraint NV 0.000 Class B F01.020.314C MC-1683-NV.11-R20 MC-1683-NV.11 OAL-14 VT-3 NA 3.000 Mech Snubber NV 0.000 Class B F01.020.315B 1-MCA-NV-H22 MC.1190.NV-01-03 OAL-14 VT-3 NA 3.000 Rigid Restraint NV 0.000 Class B F01.020.345C 1-MCA-NV-H321 MCSRD-NVA/sht. 3 QAL-14 VT-3 NA 3.000 Spring Hgr NV 0.125 Class B F01.020.346C 1MCA-NV-H322 MCSRD-NVA/sht. 3 OAL-14 VT-3 NA 3.000 Spring Hgr NV 0.125 Class B

EOC 16 DUKE ENEhiY CORPORATION CATEGORY F-A, SuDports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report E~as2 PipingSuports McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.020.562C 1-MCA-SM-H150 MCSRD-SMA/sht. 5 OAL.14 VT.3 NA 42.000 Spring Hgr SM 0.000 Class B F01.020.564C 1-MCA-SM-H164 MCSRD-SMA/sht. 5 OAL-14 VT-3 NA 42.000 Mech Snubber SM 0.000 Class B F01.020.701B 1-MCR-WL-785 MCSRD-WL-07/sht. 4 OAL-14 VT-3 NA 6.000 Rigid Restraint WL 0.000 Class B Total F01.020 Items: 38

EOC 16 DUKE ENEh -JY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Cass 3 PiPing Supports McGuire 1 Page 25 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.021A 1-MCA-CA-H105 MCSRD-CAJ/sht.1 OAL-14 VT-3 NA 8.000 Rigid Support CA 0.000 Class C F01.030.022A 1-MCA-CA-H106 MCSRD-CAJ/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support CA 0.000 Class C F01.030.025A 1-MCA-CA-H104 MCSRD-CAK/sht.1 OAL.14 VT-3 NA 6.000 Rigid Support CA 0.000 Class C F01.030.101A 1-MCA-KC-1014 MCSRD-KC-304/sht.2 OAL-14 VT-3 NA 20.000 Rigid Support KC MCFD 1573-01.01 0.000 Class C F01.030.132B 1-MCA-KC-1009 MCSRD-KC-315/sht.1 QAL-14 Vr-3 NA 10.000 Rigid Restraint KC MCFD 1573-01.00 0.000 Class C F01.030.133B 1-MCA-KC-1007 MCSRD-KC-315/sht.2 OAL-14 VT-3 NA 20.000 Rigid Restraint KC MCFD 1573-01.00 0.000 Class C F01.030.134C 1-MCA-KC-1102 MCSRD-KC-315/sht.1 QAL-14 VT-3 NA 8.000 Hyd Snubber KC MCFD 1573-01.00 0.000 Class C F01.030.136C 1-MCA-KC-2105 MCSRD-KC-315/sht.2 OAL-14 VT-3 NA 16.000 Spring Hgr KC MCFD 1573-01.00 0.000 Class C

EOC 16 DUKE ENEhxY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 26 ilass3Piping~ Suprts Inservice Inspection Plan for Interval 3 Outage 2 05118/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.138C 1-MCA-KC-1066 MCSRD-KC-304/sht.2 QAL-14 VT-3 NA 20.000 Hyd Snubber KC MCFD 1573.01.01 0.000 Class C F01.030.139B 1-MCA-KC-1008 MCSRD-KC-315/sht.2 QAL-14 VT-3 NA 16.000 Rigid Restraint KC MCFD 1573.01.00 0.000 Class C F01.030.171B 1 MCA-RN-2524 MCSRD-RN-302 QAL-14 V1-3 NA 8.000 Rigid Restraint RN MCFD 1574.02.00 0.000 Class C F01.030.172B 1-MCA-RN-1076 MCSRD-RN-303/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MCFD 1574.02.00 0.000 Class C F01.030.173B 1-MCA-RN-1077 MCSRD-RN-303/sht.1 OAL.14 VT-3 NA 8.000 Rigid Restraint RN MCFD 1574.02.00 0.000 Class C F01.030.251B 1-MCA-RV-H209 MCSRD-RN-309/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint RV MCFD 1604-03.00' 0.000 Class C F01.030.261B 1-MCA-SA-H42 MCSRD-SAA/sht.3 OAL-14 VT-3 NA 6.000 Rigid Restraint SA 0.500 Class C F01.030.262B 1 MCA-SA-H28 MCSRD-SAA/sht. 2 OAL-14 VT-3 NA 6.000 Rigid Support SA 0.000 Class C F01.030.263C 1-MCA-SA-H27 MCSRD-SAA/sht. 2 OAL-14 VT-3 NA 6.000 Mech Snubber SA 0.000 Class C

EOC 16 DUKE ENE. . I CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report EClass 3 Piping Supports McGuire 1 Page 27 Inservice Inspection Plan for Interval 3 Outage 2 0511812004 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DlA/rHK CAL BLOCKS COMMENTS F01.030.286C 1-MCA-YC-108 MCSRD-YC-305/sht.2 QAL.14 VT3 NA 5.000 Spring Hgr YC MCFD 1618.01.00 0.000 Class C F01.030.287C 1-MCA-YC.109 MCSRD-YC-305/sht.2 OAL-14 VT-3 NA

• 5.000 Hyd Snubber YC MCFD 1618-01.00 0.000 Class C Total F01.030 Items: 19

EOC 16 DUKE ENEHtiY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Supports Other Than Piping Supports McGulre 1 Page 28 Inservice Inspection Plan for Interval 3 Outage 2 05/1812004 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.031 1DG-SUPPORT-1A MCM 1301.00-02 QAL-14 VT-3 NA 0.000 1A DIESEL GENERATOR ENGINE SUPPORT KD 0.000 (DIESEL ENGINE DRIVEN Class C LUBE OIL PUMP 1A)

F01.040.032 1LDT-SUPPORT-1A MCM 1218.04-0003 OAL-14 VT-3 NA 0.000 1A DIESEL GENERATOR LUBE OIL FILTER LD 0.000 SUPPORT Class C F01.040.039 ICBD-SUPPORT MCM 1201.09.0004 QAL-14 VT-3 NA 0.000 CATION BED DEMINERALIZER SUPPORT NV 0.000 Class C F01.040.040 1MBD-SUPPORT.1A MCM 1201.09.0006 OAL-14 VT-3 NA 0.000 MIXED BED DEMINERALIZER 1A SUPPORT NV 0.000 Class C F01.040.042 1LDHX-SUPPORT MCM 1201.06-0021 QAL-14 VT-3 NA 0.000 VERTICAL LETDOWN HEAT EXCHANGER KC MC-1220-39 0.000 SUPPORT Class C F01.040.044 1WEPEC-SUPPORT MCM 1201.09-37 QAL-14 VT-3 NA 0.000 WASTE EVAP. PACKAGE EVAP. CONDENSER KC 0.000 SUPPORT Class C F01.040.045 IREPEC-SUPPORT MCM 1201.09.37 QAL-14 VT-3 NA 0.000 RECYCLE EVAP. PACKAGE EVAP. CONDENSER KC 0.000 SUPPORT Class C F01.040.046 1CCERACC-SUPPORT MCM 1211.00.0136 QAL-14 VT-3 NA 0.000 CONTROL CABLE AND EQUIPMENT ROOM AIR RN 0.000 CONDITIONING CONDENSER 1A SUPPORT Class C Total F01.040 Items: 8 Total F01 Items: 76

EOC 16 DUKE ENEHGY CORPORATION CATEGORY R-A, Risk Informed PipinQ INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report

• CIass 1 and 2 Plpina Welds McGuire I Page 29 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 N1 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• "* Elements Subject to Thermal Fatigue ****

R01.011.008 1SGD-OUTLET-W6SE MC1676-4 See Comm UT SS-CS 31.000 5149697 STEAM GENERATOR ID OUTLET NOZZLE, DWG.

Circumferential NC MCM 1201.01-0782 2.500 5158172 MC-ISIN-1553-01.00, SEGMENT NC-008 Class A Term end MCM 1201.01-0769 Nozzle to PROCEDURE PDI-UT.10 Dissimilar Safe End R01.011.015 1NCIF-1492 MCFI-1NC34 NDE-910 UT Ss 1.500 50202 SEGMENT NC-024 Circumferential NC MC-ISIN-1553-01.00 160 0.281 Class A MC-1676-4.1 Pipe to Sweepolet R01.011.019 1NC154-2 MCFI-1NC-54 NDE-600 UT SS 6.000

• SEGMENT NC-032 Circumferential NC MC-ISIN-1553-01.00 See Comm 0.719 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Elbow to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED INLIEU OF PROCEDURE NDE.600. IF PDI-UT-2 ISUSED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.051 1ND48-2 MCFI-1 ND27 NDE-600 UT SS 8.000 SEGMENT ND-008A, Circumferential ND MC-ISIN-1561-01.00 See Comm 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.052 1ND46-3 MCFI-1 ND27 NDE-600 UT SS 8.000 ^ SEGMENT ND-009A, Circumferential ND MC-ISIN-1561-01.00 See Comm 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

ROt.011.076 1NI1F36 MCFI-1N192 NDE-600 UT SS 4.000 ^ SEGMENT NI-030A, Circumferential NI MC-ISIN-1562-03.00 See Comm 0.337 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Tee to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS

EOC 16 DUKE ENEhkGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report lClass 1 and 2 Piping Welds McGuire 1 Page 30 Inservice Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO /DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS QUALIFICATIONS, PROCEDURE PDIWUT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.078 1Ni1F1134 MCFI-1N121 NDE-600 UT SS 18.000 ' SEGMENTNI-059, Circumferential NI MC-ISIN-1562-03.01 See Comm 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS Elbow DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.079 1N133A-1 MCFI-1N121 NDE-600 UT SS 18.000

• SEGMENTNI-059, Circumferential NI MC-ISIN-1562-03.01 See Comm 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS Elbow DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.080 1NI1F1154 MCFI-1N121 NDE-600 UT SS 18.000

• SEGMENT NI-060, Circumferential NI MC-ISIN-1562-03.01 See Comm 0.250 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS Elbow DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.082 1NI93-4 MCFI-1N197 NDE-600 UT SS 3.000

• SEGMENT NI-061A, Circumferential NI MC-ISIN-1562-01.00 See Comm 160 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS Reducer DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED IN LIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

EOC 16 DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report iCassI and 2 Piping Welds McGuire 1 Page 31 InservIce Inspection Plan for Interval 3 Outage 2 05/18/2004 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS R01.011.150 1NVP888-1 MCFI-1NV175 NDE-600 UT SS 2.000 SEGMENT NV020AF, Circumferential NV MC-ISIN-1554-03.00 See Comm 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED INLIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.151 1NV1FW173-13 MCFI-INV173 NDE-600 UT SS 2.000 SEGMENT NV-020AF, Circumferential NV MC-ISIN-1554-03.00 See Comm 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDI-UT-2 MAY BE USED INLIEU OF PROCEDURE NDE-600. IF PDI-UT-2 IS USED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

R01.011.152 1NV614-1 MCFI-1NV5 NDE-600 UT SS 2.000 SEGMENT NV-020AG, Circumferential NV MC-ISIN-1554-01.00 See Comm 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B MC-ISIN-1554-01.01 Flange to REQUIREMENTS Pipe DEPENDING UPON THE EXAMINERS QUALIFICATIONS, PROCEDURE PDIWUT-2 MAY BE USED INLIEU OF PROCEDURE NDE-600. IF PDI-UT-2 ISUSED, CALIBRATION BLOCK PDI-UT-2-M SHOULD BE USED.

Total R01.011 Items: 13 Total R01 Items: 13

4.0 Results of Inspections Performed The results of each examination shown in the final Inservice Inspection Plan (Section 3 of this report) are included in this section. The completion date and status for each examination are shown. All examinations revealing reportable indications and any corrective action required as a result are described in further detail in Subsection 4.1 and 4.2. Corrective measures performed and limited examinations are described in further detail in Subsections 4.3 and 4.4.

The information shown below is a field description for the reporting format included in this section of the report:

ITEM NUMBER = ASME Section XI Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2),

Augmented and Risk Informed Requirements ID NUMBER - Unique Identification Number SYSTEM - Component System Identification INSP DATE = Date of Examination INSP STATUS = CLR Clear REC Recordable REP Reportable INSP LIMITED = Indicates inspection was limited.

Coverage obtained is listed GEO REF Y Yes (Geometric Reflector N No applies only to UT)

Y Yes RFR (Relief Request) - N No COMMENTS = General and/or Detail Description Outage 2/EOC 16 Refueling Outage Report Page 1 of 2 McGuire Unit 1 Revision 0 Section 4 June 14, 2004

DUKE ENEF * 'ORATION QUALITY ASSURALt .1 utuHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 16 Page 1 McGuire 1 Inservice Inspection Listing Plant: McGuire 1 05/18/2004 Interval 3 Outage 2 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS B01.022.001 1RPV 1-446A 03/12/2CD04 CLR --- N N B01.022.002 1RPV 1-446B 03/12/2C104 CLR --- N N 801.022.003 1RPV 1-446C 03/12/2CD04 CLR -.. N N 802.011.002 1PZR-5 03/20/2C004 CLR 94.83% N N REFERENCE PIP M.04-1549 B03.110.002 1PZR-12 03/14/2CD04 CLR 73.60% N Y B03.110.005 1PZR-15 03/14/2CD04 CLR 73.60% N Y B03.110.006 1PZR-16 03/14/2CD04 CLR 73.60% N Y B03.120.002 1PZRF12R 03/14/2CD04 CLR --- N N B03.120.005 1PZR-15R 03/14/2C 104 CLR -.. N N 803.120.006 1PZR-16R 03/14/2C D04 CLR .-- N N 803.140.001 I SGA-INLET 03/111/2C D04 CLR .-- N N B03.140.002 1SGA.OUTLET 03/11/2C104 CLR -.. N N B03.140.007 1SGD.INLET 03/11/2C104 CLR -.. N N 803.140.008 1SGD.OUTLET 03/11/2C 304 CLR --- N N B07.020.001 1PZR-MWB 03/10/2C 304 CLR --- N N 807.060.003 1RCP-1 C-S 03/17/2C104 CLR --- N N B07.060.007 1RCP-1C-H 03/17/2C 304 CLR -.. N N 807.070.061 D 1NI-93 03/18/2C 304 CLR --. N N B10.010.002 1PZR-W13A 03/21/2C304 CLR --- N N 810.010.003 1PZR-W13B 03/21/2C D04 CLR --- N N 812.050.0018B 1NC-2 03/16/2C D04 CLR .-. N N B12.050.004F 1NI-82 03/16/2C 304 CLR .-- N N B12.050.004H 1NI-94 03/16/2C 304 CLR --- N N B12.050.006A 1Nl-126 03/17/2C 304 CLR --- N N B13.010.001 1RPV-INTERIOR 03/23/2C104 CLR -.. N N C01.010.040 I ELDHX-SH-FLG NV 03/14/2C104 CLR .-- N N C01.010.090 1RCPA-8*1 02/25/2C304 CLR 74.40% N Y C01.010.100 1ASWINJF-1 02/25/2C304 CLR 64.40% N Y C01.010.101 1ASWINJF-2 02/25/2C104 CLR 90.10% N N C01.020.020 1ELDHX-SH-HD NV 03/14/2C )04 CLR --- N N C01.020.021 1ELDHX-HD-FLG NV 03/16/2C304 CLR 79.80% N Y C01.020.080 1RCPA-10-1 02/25/2C104 CLR 71.10% N Y C03.010.003 1RCPSS-SUPP NV 03/18/2C104 CLR .-- N N THIS WAS EXAMINED DURING EOC-16 AS AN ADDITIONAL SAMPLE FOR C03.010.005 C03.010.005 1ELDHX-SUPPORT NV 03/14/2004 REP N N REFERENCE PIP M-04-1342 C03.020.022 1-MCA-ND-H16 ND 03/18/2004 CLR N N C03.020.026 1-MCA-ND-H24 ND 02/25/2004 CLR N N

DUKE ENEP ' 'ORATION QUALITY ASSURAN. . TrhiNICAL SERVICES In-Service Inspection Database Management System Run D EOC 16 McGuire 1 Inservice inspection Listing Page 2 Plant: McGuire 1 05118/2004 Interval 3 Outage 2 ITEM NUMBER ID NUMBER SYSTEM INSP DA TE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS C03.020.032 1-MCA-NI-H278 NI 03/03/2004 CLR C03.020.045 1-MCA-NS-H87 NS 03/02/2004 CLR C03.020.051 1-MCA-NV-H321 NV 03/03/2004 CLR C03.020.052 I -MCA-NV-H322 NV 03/03/2004 CLR D01.010.001 ICBD-SUPPORT NV 02/26/2004 CLR D01.010.002 1MBD-SUPPORT-1A NV 02/26/2004 CLR D01.010.004 1LDT-SUPPORT-1A LD 02/25/2004 CLR D01.020.081 1-MCA-SA-H42 SA 02/17/2004 CLR F01.010.006B I -MCR-NC-544 NC 03/09/2004 CLR F01.010.010C 1-MCR-NC-564 NC 03/09/2004 CLR F01.010.011C 1-MCR-NC-565 NC 03/09/2004 CLR F01.010.012C 1-MCR-NC-566 NC 03/09/2004 CLR F01.010.024C I -MCR-NC-801 NC 03/09/2004 CLR F01.010.052B 1-MCR-ND-505 ND 03/09/2004 CLR F01.010.105C 1-MCR-NI-531 NI 03/09/2004 CLR F01.010.106B 1-MCR-NI-534 Ni 03/09/2004 CLR F01.010.1150 1-MCR-NI-611 NI 03/09/2004 CLR F01.010.1 16A 1-MCR-NI-614 NI 03/09/2004 CLR F01.010.1530 1-MCR-NV.852 NV 03/09/2004 CLR F01.020.011A 1-MCA-CA-H429 CA 02/16/2004 CLR F01.020.012A 1-MCA-CA-H457 CA 02/16/2004 CLR F01.020.156A I-MCA.ND-H29 ND 02/17/2004 CLR F01.020.158A 1-MCA.ND-H64 ND 02/17/2004 CLR F01.020.162C 1-MCA-ND.H82 ND 02/16/2004 CLR F01.020.167C 1-MCA-ND-H247 ND 02/16/2004 CLR F01.020.184B 1-MCA-ND-H264 ND 02/18/2004 CLR F01.020.185B 1-MCA-ND-HI6 ND 02/17/2004 CLR F01.020.1868 1-MCA-ND-H335 ND 02/16/2004 CLR F01.020.187C 1-MCA-ND-H24 ND 02/18/2004 CLR F01.020.214A 1-MCR-NI-696 NI 03/08/2004 CLR F01.020.215A 1-MCR-NI-H240 NI 03/22/2004 CLR f01.020.216A 1-MCR-NI-698 NI 03/08/2004 CLR F01.020.2199B 1-MCR-NI-708 NI 03/08/2004 CLR F01.020.220B 1-MCR-NI-712 NI 03/08/2004 CLR F01.020.221 B 1-MCR-NI-713 NI 03/08/2004 CLR F01.020.235B I -MCA-NI-H278 NI 02/17/2004 CLR

DUKE ENEP-" ( 'ORATION QUALITY ASSURAI TEuwiNICAL SERVICES In-Service Inspection Database Management System Run D EOC 16 McGuire 1 Inservice Inspection Listing Page 3 Plant: McGuire 1 05/18/2004 Interval 3 Outage 2 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS F01.020.236A 1-MCR-NI-501 NI 03/09/2004 CLR F01.020.255A 1-MCA-NS-H13 NS 02/16/2004 CLR F01.020.256A 1-MCA-NS-H17 NS 02/16/2004 CLR F01.020.257A 1-MCA-NS-H22 NS 02/17/2004 CLR F01.020.258A 1-MCA-NS-H25 NS 02/23/2004 CLR F01.020.259C 1-MCA-NS-H28 NS 02/17/2004 CLR F01.020.278B 1-MCA-NS-H87 NS 02/16/2004 CLR F01.020.280B 1-MCR-NS.501 NS 03/07/2004 CLR F01.020.281B 1-MCR-NS-502 NS 03/07/2004 CLR F01.020.309A 1-MCA-NV-H15 NV 02/16/2004 CLR F01.020.31OA 1-MCA-NV-H16 NV 02/16/2004 CLR FO1.020.31 1C 1-MCA-NV-H17 NV 02/18/2004 CLR F01.020.3128 1-MCA-NV-H585 NV 02/23/2004 CLR F01.020.3133B 1 MCA-NV-H588 NV 02/23/2004 CLR F01.020.314C MC-1683-NV.11 -R20 NV 02/16/2004 CLR F01.020.315B 1-MCA-NV-H22 NV 02/18/2004 CLR F01.020.345C 1-MCA-NV-H321 NV 02/17/2004 CLR F01.020.346C 1-MCA-NV-H322 NV 02/17/2004 REC F01.020.562C 1-MCA-SM-H150 SM 02/16/2004 CLR F01.020.564C 1-MCA-SM-H164 SM 02/16/2004 CLR F01.020.701B 1-MCR-WL-785 WL 03/09/2004 CLR F01.030.021A 1-MCA-CA.H105 CA 02/17/2004 CLR F01.030.022A 1 MCA-CA-H106 CA 02/17/2004 CLR F01.030.025A 1-MCA-CA-H104 CA 02/17/2004 CLR F01.030.101A 1-MCA-KC-1014 KC 02/18/2004 CLR F01.030.132B 1-MCA-KC.1009 KC 02/23/2004 CLR F01.030.1338 1-MCA-KC-1007 KC 02/23/2004 CLR F01.030.134C 1-MCA-KC.1102 KC 02/16/2004 CLR F01.030.136C 1-MCA-KC-2105 KC 02/16/2004 CLR F01.030.138C 1-MCA-KC.1066 KC 02/18/2004 REC F01.030.139B 1-MCA-KC-1008 KC 02/23/2004 REC F01.030.171B 1-MCA-RN-2524 RN 02/17/2004 CLR F01.030.1728 1-MCA-RN-1076 RN 02/17/2004 CLR F01.030.173B 1-MCA-RN-1077 RN 02/17/2004 CLR F01.030.251B 1-MCA-RV-H209 RV 02/18/2004 CLR F01.030.261B 1-MCA-SA-H42 SA 02/17/2004 CLR

DUKE ENEi 't 'ORATION QUALITY ASSURAN . TEtLHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 16 McGuire 1 Inservice Inspection Listing Page 4 Plant: McGuire I 05/18/2004 Interval 3 Outage 2 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS F01.030.262B 1-MCA-SA-H28 SA 02/16/2004 CLR ... N N F01.030.263C 1-MCA-SA-H27 SA 02/16/2004 CLR N N F01.030.286C 1-MCA-YC-108 YC 02/17/2004 REC N N F01.030.287C 1-MCA-YC-109 YC 02/17/2004 CLR N N F01.040.031 1DG.SUPPORT-1A KD 02/25/2004 CLR ... N N f01.040.032 1LDT-SUPPORT-1A LD 02/25/2004 CLR ... N N F01.040.039 1CBD-SUPPORT NV 02/26/2004 CLR ... N N F01.040.040 1MBD-SUPPORT-1A NV 02/26/2004 CLR N N F01.040.042 1LDHX-SUPPORT KC 03/01/2004 CLR N N F01.040.044 1WEPEC-SUPPORT KC 02/26/2004 CLR N N F01.040.045 1REPEC-SUPPORT KC 02/26/2004 CLR N N F01.040.046 1CCERACC-SUPPORT RN 02/26/2004 CLR N N R01.011.008 1SGD-OUTLET-W6SE NC 03/11/2004 CLR N N R01.011.015 1NC1 G1492 NC 03/12/2004 CLR N N R01.011.019 1NC154-2 NC 03/11/2004 CLR N N R01.011.051 1ND48-2 ND 03/16/2004 CLR N N R01.01 1.052 I ND46-3 ND 03/05/2004 CLR N N R01.011.076 1N11F36 NI 03/03/2004 CLR ... N N R01.011.078 1N1lF1134 NI 03/02/2004 CLR N N 35.60%

R01.011.079 1N133A-1 NI 03/02/2004 CLR N N R01.011.080 1Nl1F1IS4 NI 03/02/2004 CLR N N R01.01 1.082 1N193-4 NI 03/16/2004 CLR N N R01.011.150 1NVP888-1 NV 02/25/2004 CLR N Y R01.011.151 1NV1FW173-13 NV 02/25/2004 CLR N N R01.01 1.152 1NV614-1 NV 03/03/2004 CLR N N

4.1 Reportable Indications There was one reportable indication for the examinations associated with this report period. Item Number C03.010.005 reference PIP M-04-1342.This involved indications found on Excess Letdown Heat Exchanger Support.

4.2 Corrective Action Corrective action is action taken to resolve flaws and relevant conditions, including supplemental examinations, analytical evaluations, repair / replacement activities, and corrective measures. There was one corrective action for the examinations associated with this report period.

Item Number C03.010.005 had a reportable condition, which the ASME Section Xl Code required one additional examination. For additional information covering this examination item reference PIP M-04-1342.

4.3 Corrective Measures Corrective measures are actions (such as maintenance) taken to resolve relevant conditions, but not including supplemental examinations, analytical evaluations, and repair / replacement activities. Any corrective measures performed for examinations associated with this report period will be shown on the examination data sheets which are on file at the Duke Energy Corporate Office in Charlotte, North Carolina.

4.4 Limited Examinations Limitations (i.e., 90% or less of the required examination coverage obtained) identified for examinations associated with this report period are shown below. A relief request will be submitted to seek NRC acceptance of the limited coverage this information will be on file at the Duke Energy Corporate Office in Charlotte, North Carolina.

Item Number Description of Limitation B03.110.002 73.60%

B03.110.005 73.60%

B03.110.006 73.60%

C01.010.090 74.40%

C01.010.100 64.40%

C01.020.021 79.80%

C01.020.080 71.10%

R01.011.150 35.60%

Outage 21EOC 16 Refueling Outage Report Page 2 of 2 McGuire Unit 1 Revision 0 Section 4 June 14, 2004

5.0 Owner's Report for RepairlReplacement Activities As required by the applicable code, records of Class 1 and Class 2 Repair and Replacement work is included on NIS-2 forms in this section.

No items were determined to have work performed outside this report period.

I Work Order Number I Signoff Date/EOC I PIP Numberl NONE I NONE I NONE The NIS-2 forms included in this section were completed for work performed during this report period.

The individual work request documents and manufacturers' data reports are on file at McGuire Nuclear Station.

5.1 Class 1 and2 Preservice Examinations As required by the applicable code, Preservice Inspection (PSI) Examinations were performed on ISI Class 1 and 2 items during this report period. All Class 1 and 2 PSI examination data listed below is on file in the McGuire Nuclear Station QA Vault.

Work Order Number Identification Number ISI Type of

, Class Inspection 98547231 1MCR-NI-529 A VT-3 98549532 1-NI-VA-126 A VT-1 98554952 1MCA-FW-H 110 B VT-3 98555751 1MCA-NS-H106 B VT-3 98555754 1MCA-FW-H157 B VT-3 98555757 1 MCA-FW-H 134 B VT-3 98555761 1 MCA-NV-H464 B VT-3 98555763 1 MCA-NI-H083 B VT-3 98577242 1MCA-CF-H184 B VT-3 98578675 1MCA-CF-H206 B VT-3 98580705 1NC-VA-2 A VT-1 98580705 1NC-VA-2 A VT-3 98581864 1 NS-HX-0004 B VT-1 98583740 1MCR-S-NF-100-01-1 B VT-3 98583742 1MCR-NI-912 B VT-3 98584799 1 MCR-NV-1011 B VT-3 Outage 2/EOC 16 Refueling Outage Report Page 1 of 2 McGuire Unit 1 Revision 0 Section 5 June 14, 2004

Work Order Number Identification Number ISI Type of Class In o 98584805 1MCR-NI-612 A VT-3 98584806 1MCR-NC-803 A VT-3 98584809 1MCR-NC-687 A VT-3 98584819 1MCR-NC-681 A VT-3 98584821 1MCR-NC-565 A VT-3 98584823 1MCR-NC-562 A VT-3 98584824 1MCR-NC-561 A VT-3 98584825 1MCR-NC-559 A VT-3 98584826 1MCR-NC-557 A VT-3 98584828 1MCR-NC-551 A VT-3 98584829 1MCR-NC-549 A VT-3 98584831 1MCR-NI-786 B VT-3 98607887 1MCA-SM-H1 18 B VT-3 98607888 1MCA-SM-H119 B VT-3 98607889 1MCA-SM-H034 B VT-3 98607892 1MCA-SM-H115 B VT-3 98610296 1MCA-FW-H136 B VT-3 98628183 1MCA-SA-H17 B VT-3 98629069 1MCA-ND-H64 B VT-3 98654052 1-NI-VA-82 A VT-3 98654053 1-NI-VA-94 A VT-3 98655015 1MCA-SM-H064 B VT-3 98655016 1MCA-SM-H136 B VT-3 98659200 1MCR-NV-1005 B VT-3 Outage 2/EOC 16 Refueling Outage Report Page 2 of 2 McGuire Unit 1 Revision 0 Section 5 June 14, 2004

FORM NIS-2 OWNER'S REI .. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv Ia. Date March 28. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 011 02 033 OShared (specify Units __)

3. Work Performed By: Duke Power Comoanv 3a. Work Order #:. 98452797 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job U Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #:_ N/A

4. (a) Identification of System: CF - Feedwater 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component - Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

_ ___ ___ ___ ____ ___ _ _ _ _I(yaese Installed__ o o rs nno A 0 El Corrected, 0 No 1-CF-VA-120 Pacific 0239-6 74 V File# 1977 0 Removed,

. . - 1090 0 Installed 0 Yes B 0 Corrected, 0 No 0 Removed,

. . 0 Installed 0Yes C 0 Corrected, 0 No 03 Removed, l 0 Installed 0 Yes D 0 Corrected, 0 No 0 Removed,

. ., 0 Installed 0Yes E 0l Corrected, 0 No 0 Removed, 0 Installed 0Yes F 0 Corrected, 0 No 0 Removed,

._ Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material in the bonnett

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. Il Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date Owner oirOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivana and employed by HSB Cj-~a-q inspected he c mponents described in this Owner's Report during the period I I I oZ zV 70 and state that to the best of my knowledge and belief, the Owner has perormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this inspection. //

> Y E~erome

,V F Swan Commissions PA2759, N-I nspectosigtr National Board. State, Province and Endorsements Date 3 R/C Page 2 of 2

FORM NIS-2 OWNER'S RE& .. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Companv la. Date March 25.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: E11 E32 03 OShared (specify Units _

3. Work Performed By: Duke Power Companv 3a. Work Order #:, 98540118 Address: 526 S. Church Street. Charlotte NC 28201-1006 RSPir Ornizgaion Job t Type Code Symbol Stamp: IAt Authorization No. NAIA Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: NI - Safety Inlection 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 19ZJ. Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repalr / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

l Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 l Column 8 Name of Component Name of Mg - Mfg Serial No. National Board No. Other Identification Year Bullt Corrected, Removed, or ASME Code Stamped

_ . . ._. _ _ Installed - (yes or no)

A 03 Corrected, 0 No 1-NI-VA-171 Kerotest CK2-21 3970 . - N/A 1974 0 Removed,

__ Installed 1 Yes B 0 Corrected, 0 No 03 Removed, C

_ 0 3 Installed 0 Yes 0 Corrected, 0 No 03 Removed, O0Installed 0 Yes D 0 Corrected, 0 No 03 Removed, O0Installed 0 Yes E 0 Corrected, 0 No

0. Removed,

-- 0 Installed 0Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 03 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bonnet (cover)

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. El Other 0 Exempt[

Pressure PSig Test Temp. OF Pressure psig Test Temp. OF Pressure Sig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.OA Tech Specialist Date Owner orOwner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivana and employed by HSB CT havq inspected She cmponents described in this Owner's Report during the period 3 /1 /°P to j2)Z and state that to the best of my knowledge and belief, the Owner has performed exAmin'ations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o roperty damage or a loss of any kind arising from or connected with this 9nspection. /

V Inspectos Y erome F Swan Commissions PA2759. N-I National Board, State, Province and Endorsements C Dat Page 2 of 2

FORM NIS-2 OWNER'S REr -... . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provislons Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv la. Date March 25.2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Fernr Road. Huntersville. NC 28078 2a. Unit: E1 02 03 OShared (specify Units )

3. Work Performed By, Duke Power ComDanv 3a. Work Order #:. 98541680 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair organization Job C Type Code Symbol Stairip: N1 Authorization No. 4A Expiration Date: N/A 3b. NSM or MM #:_ N/A

4. (a) Identification of Sy'stem: RV- Containment Ventilation Coolino Water 4. (b) Class of System: .B..

5. (a) Applicable Construction Code: ASMEIII 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 0ol 6 Column 7 Column 8 Name of Component Name of Mig Mfg Serial No. National Board No. Oter Identiflcation Year Built Corrected, Removed, or ASME Code Stamped

. .. .- . . . . - In iatlled (yes or no)

A . . 0 Corrected, 0 No.

RV System Duke Power.  : N/A 41 N/A 1981 0 Removed,

. Installed . d Yes B 0 Corrected, 0 No 0: Removed,

.. O Installed 0 Yes C 03 Corrected, 0 No 03 Removed, 03 Installed 0 Yes D 03 Corrected, 0 No

-o Removed, 03 Installed 0Yes E 0 Corrected,- 0 No 0 Removed, 0

El Installed - 0 Yes F 0 Corrected, 0 No 0 Removed, O Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced bolting material in flange at valve 1RV76

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. -F

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrOQA Tech Specialist Date 3/-2pOot Owner er's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CrT-ave inspected the components described in this Owners Report during the period T3tZ I/& to.a2S/L9 ZI; and state that to the best of my knowledge and belief, the Owner has performed examihations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore neither the Inspector nor his employer shall be liable in any manner for ninspection.

any personal injury property damage or a loss of any kind arising from or connected with this 2

roma F Swan Commissions PA2759, N-I Inspecoes S e/ National Board, State, Province and Endorsements c Iat/

Page 2 of 2

FORM NIS-2 OWNER'S REF .. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv la. Date March24.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: M1 02 03 OShared (specify Units -)_

3. Work Performed By: Duke Power Company: 3a. Work Order #: 98542710 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organlulon Job I Type Code Symbol Stamp: N4/S Authorization No. ! ExpIration Date: N/A 3b. NSM or MM N: l N/A

4. (a) Identification of System: NV.-Chemical and Volume Control 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASMEIII 19Z.I Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair! Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg . Mfg Serial No. National Board No. Other Identification Year Buitt Corrected, Removed, or ASME Code Stamped

.I ._

. installed (yes or no)

A 0 Corrected, 0 No 1-NV-VA-459 Anchor Darling DB171-1-2 1223 N/A 1990 0 Removed,

,

3_Installed. 0 Yes B - . 0 Corrected, 0 No 03 Removed, 0

3_Installed 0Yes C 3 Corrected,; O No 0 Removed, D

0 3_Installed 0-Yes 0 Corrected, 0 No 0- Removed,

. i 0 3 Installed 0 Yes E 0l Corrected, 0 No 0 Removed, O0Installed 0 Yes F 0 Corrected, 0 No 0 Removed,

. 0 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced disc

8. Tests Conducted:Hydrostatic 0 Pneumatic O Nom. Operating Press. 0 Other 0 ExemptO Pressure pSig Test Temp. OF Pressure psig Test Temp. OF

- Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed our wne.FL Grass Jr.QA Tech Specialist Date 3/s.gI f Owner 6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvana and employed by HSB CTflave.inspecte thepomponents described in this Owner's Report during the period

.. o( toll1/sZ Log.; and state that to the best of my knowledge and belief, the Owner has performed eamirniations and taken corrective measures described In this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for fl inspection. <

any personal injuryHr property damage or a loss of any kind arising from or connected with this AUerome F Swan Commissions PA2759, N-I Inspector, SnaJAh National Board, State, Province and Endorsements C Date 3.L-3LFV 4- I Page2 of 2

FORM NIS-2 OWNER'S REI .. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv Ia. Date March 12. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1J. of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShired (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98547231 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repir Organratlon Job 0

Type Code Symbol Stamp: NIA Authorization No. M/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: Ni - Safety Injection 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASMEIil 197_. Edition, Summer and Winter Addenda, NIA Code Cases (b) Applicable Edition of Section Xl Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serfal No. National Board No. Oter Identificatlon Year Built Corrected. Removed, or ASME Code Stamped

___ __ __ __ __ __ __ __ _ __ __ __ __ __ __ - Instafted (me or no)

A 0 Corrected, 0 No 1-MCR-NI-529 Duke Power N/A' N/A' N/A N/A 0 Removed, B

_3_ . . . . .. ' -'Installed

. 03Yes 0 Corrected, 0 No

.<0 Removed, C

. l o Installed 0Yes Corrected, 0 No o Removed,'

D

. ____ . . . .3 Installed 0Yes 03 Corrected, 0 No 03 Removed, E

_3 . 0Installed 0 Yes 03 Corrected;, 0 No 03 Removed,

__3_ . . _ . . . Installed 0 Yes F 0 Corrected, 0 No 03 Removed,

_ . . 0 Installed 0Yes Page i of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced sprinp can rods

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF

-- Pressure Sig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.QA Tech Secialist -

Date Owner orbwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CTliavq inspected he gbmponents described in this Owner's Report during the period 3/o/S to 317-L1fL; and state that to the best of my knowledge and belief, the Owner has performed ex'amirations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermo e, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this 9r

{linspection.

isp-etieon F Swan Commissions PA2759, N-I a inspector's~platurp National Board, State, Province and Endorsements C-I Page 2 of 2

FORM NIS-2 OWNER'S REF ., . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date March 23. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 C2 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv ,3a. Work Order#: 98549532 Address: 526 S. Church Street. Charlotte NC 28201-1 006 Rseair OraIzation JobX Type Code Symbol Stamp: SO Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: NI - Safetv Inlection 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME III 19ZJ Edition, Summer and Winter Addenda, N/A . Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

l Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8.

Name of Component Name of Mfg Mfg Serial No. National Board No. .. Other Identtfication Year Bullt Corrected, Removed, or ASME Code Stamped

_ -_ ._ . _. _. - Installed (Yes or no)

A El Corrected, 0 No 1-NI-VA-126 Aloyco A0158 N/A N/A 1974 0 Removed,

._3. . . .  : . . . Installed El Yes B 0 Corrected, 0 No 0 Removed, C

__3 . . . . __ Installed 0Yes 0.Corrected, 0 No 0 Removed, D

l_ . __ . . . . . . Installed 03 Yes 03 Corrected, 0 No

0. Removed, 03 Installed 0 Yes E .0 Corrected, 0 No 0 Removed, I.E30 Installed 0Yes F Corrected, 0 No 0 Removed, 03 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced disc. 4 studs. & 7 nuts

8. Tests Conducted:Hydrostatic 0 Pneumatic aJ Nom. Operating Press. E Other 0 ExemptO Pressure pSig Test Temp. OF Pressure pSig Test Temp. OF Pressure psig Test Temp. °F

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed dSf k4 2 FL Grass JrOA Tech Specialist Owner orOwner's Designee. Title Date CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT Oave inspectedthe omponents described in this Owner's Report during the period r/I./0I to3/,12Ž i1 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this

/ inspection.

/

I INational rome F Swan Commissions PA2759. N-I Board, State, Province and Endorsements 6oae3;t0 Page 2 of 2

FORM NIS-2 OWNER'S REF . . OR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Company 1a. Date March 23. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station-12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: E1 02 03 OShared (specify Units )

3. Work Performed By:, Duke Power Companv 3a. Work Order # .

oan;'i on Jf zI{flVJ Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organlhido Job i Type Code Symbol Stamp: NA Authorization No. NA Expiration Date: MA 3b. NSM or MM1: N/A

4. (a) Identification of System: NC . Reactor Coolant 4. (b) Class of System: .A

5. (a) Applicable Construction Code: ASME III 19f. Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Bult corrected. Removed, or ASME Code Stamped

, . Installed (yes or no)

A 0 Corrected, 0 No 1-NC-VA-27 Fisher 5671562 1035 N/A 1976 0 Removed,

. 0 3 Installed 0 Yes B 03 Corrected, 0 No

o Removed, E0Installed 0 Yes C 0 Corrected, 0 No 03 Removed,

. 0 Installed 0 Yes D 03 Corrected, 0 No 03 Removed,

. . . . . .0 Installed 0Yes E 0 Corrected, 0 No 03 Removed,.

. 0 3 Installed 0Yes F 0 Corrected, 0 No 0 Removed,

. . 0 Installed 0Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced ball (Dlug)

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. El Other 0 ExemptO Pressure pSig Test Temp. OF Pressure psig Test Temp. °F Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed . FL Grass JrOA Tech Specialist Date _V Omer oKOwner's Designee. Tite CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSI C4iavp inspected hecpmponents described in this Owner's Report during the period

.I 710.Y to-3/2V/O5 and state that to the best of my knowledge and belief, the Owner has performed e amirlations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury property damage or a loss of any kind arising from or connected with this inspection.

- ome F Swan Commissions PA2759. N-1 Inspectors S ry National Board, State. Province and Endorsements Date 3 / - /0 Page 2 of 2

FORM NIS-2 OWNER'S REF . . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv la. Date March 23. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: McGuire Nuca St 12700 Haaers Ferry Road. Huntersvile. NC 28078 2a. Unit: E1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. WorkOrder#: 98554952 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organruion Job #

Type Code Symbol Stamp: ML&Authorization No. NIA Expiration Date: 1!A 3b. NSM or MM N/A

4. (a) Identification of System: FW - Refuelina Water 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME li 19yl. Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xi Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mig Mfg Serial No. National Board No. Oher Identification Year Built Corrected, Removed, or ASME Code Stamped

._._._._Instafled (yes or no)

A 03 Corrected, 0 No 1-MCA-FW-H110 Duke Power - 19181 N/A N/A N/A 0 Removed, O Installed 0 Yes B 0 Corrected, 0a No 1-MCA-FW-H11O Duke Power 15689 N/A N/A N/A 0 Removed,

_ 0 Installed 03Yes C 0 Corrected, 0 No 0 Removed, 0 Installed 0OYes D 0 Corrected, 0 No 03 Removed, E0 Installed 0 Yes E 0 Corrected, 0 No iORemoved, O Installed 0 Yes F 0 Corrected,- 0 No o Removed,

[3 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced Snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exemptol Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. _F

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 1&'ty%1/ FL Grass JrQA Tech SDecialist Date S/4 /o eq Owner o(Owner's Designee, ritle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT'ha e inspected The Components described in this Owner's Report during the period

.317L/2/O to L23

/23;/0; and state that to the best of my knowledge and belief, the Owner h'asperformed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for dinspection.

any personal injury property damage or a loss of any kind arising from or connected with this U e rome F Swan Commissions PA2759. N-I Inspectors 5iftur National Board, State, Province and Endorsements Date 3 .aY Page 2 of 2

FORM NIS-2 OWNER'S REI , .. OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of Tho ASME Code Section Xl

1. Owner Address: Duke Power Comoanv 1a. Date March 23. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1_.Lof 1

2. Plant Address: McGuIre Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: M1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98555712 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repalr Organlzation Job #

Type Code Symbol Stamp: _A Authorization No. tNIA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME II 19Z1 Edition, Summer and Winter Addenda, NWA Code Cases (b) Applicable Edition of Section Xi Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mhg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

__ ._ ,_._._:_._._._._._ .Installed (yes or no)

A 03 Corrected, 0 No 1-MCA-NC-H074 Duke Power, 14785 N/A N/A N/A El Removed, 0 Installed 0 Yes B 03 Corrected; 0 No 1-MCA-NC-H074 Duke Power: 20685 N/A N/A N/A 0 Removed,

............ -:- -:-. Installed 0 Yes C 0 Corrected, 0 No 0 Removed, D

. . : 0 Installed. 0Yes 0 Corrected, 0 No 0 Removed, E

- . 0 13 Installed 0Yes

. 0 Corrected, 0 No 0 Removed, F

. . 0 3 Installed 0Yes 03 Corrected, 0 No 0 Removed,

. . . . 0 Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced snubber

8. Tests Conducted:Hydrostatic E Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure p sig Test Temp. OF Pressure -p sig Test Temp. _ F Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \j/4 1dL FL Grass Jr.OA Tech Specialist Date Ka> / /?o

.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivana and employed by HSI 2QT, e inspected Ihe components described in this Owner's Report during the period 9t(L/04 to 1/Z3/OY;and state that to the best of my knowledge and belief, the Owner has erforrmed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this

{)inspection.X/

ip i - rorme F Swan Commissions PA2759, N-l

/ Inspector, tuye National Board. State, Province and Endorsements Date a Page 2 of 2

FORM NIS-2 OWNER'S REI .. .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comranv la. Date March 21. 2004 526 S. Church Street; Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: Mckie ulerSation 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 0 Shared (specify Units )

3. Work Performed By: Duke Power ComDanv 3a. Work Order #: 98555751 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Orgamiation Job 0 Type Code Symbol Stamp: M/A Authorization No. M Expiration Date: N/A 3b. NSM or MM #- N/A

4. (a) Identification of System: NS - Containment Sorav 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 19Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4 Column 5 Col 6- Column 7 Column 8 Name of Component Name of Mfg

• Mfg Serial No. National Board No. Other ldentfficaton Year Built Corrected, Removed, or ASME Code Stamped

._ ._._, _, _. . ._in.tafted (es or no)

A . _ 0 Corrected, El No 1-MCA-NS-H106 Duke Power 14853 N/A N/A N/A 0 Removed,

_ - . 0 Installed 0 Yes B . 0 Corrected, 0 No 1-MCA-NS-H106 Duke Power 20541 N/A N/A N/A 0 Removed,

- 1 Installed 0 Yes C -. 0 Corrected, 0 No 1-MCA-NS.H106 Duke Power 14837 N/A N/A N/A 0 Removed, O3 Installed 3 Yes D 0 Corrected, 0l No 1-MCA-NS-H106 Duke Power 19416 N/A N/A N/A 0 Removed,

_ _ __ Installed O Yes E 03 Corrected, 0 No 0 Removed,

' 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed,-

0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubbers

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptEl Pressure psig Test Temp. °F Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made inthe report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date -2/-roy' Owner dlOwners Designee. Trde CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT ave inspected the omponents described in this Owners Report during the period to 0 ; and state that to the best of my knowledge and belief, the Owner has performed e aminations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this Dinspection.-

Jerome F Swan Commissions PA2759. N-I Jinspto t re National Board, State, Province and Endorsements Co Daet/34 Page 2 of 2

FORM NIS-2 OWNER'S REP . .JR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Companv la. Date March21:.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units , .

3. Work Performed By: Duke Power Comoanv . 3a. Work Order #: 98555754 Address: 526 S. Church Street. Charlotte NC 28201-1006 Rear Orgenization JX 9 Type Code Symbol Stamp: Nall Authorization No. NtlA Expiration Date: N!A 3b. NSM or MM # N/A

4. (a) Identification of System: FW - Refueling Water 4. (b) Class of System: B

5. (a) Applicable Constnuction Code: ASMEIII 19Z1 Edition, Summer and Winter Addenda, k/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair! Replacement Activity:' 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serlal No. National Board No. Oter Identification Year Bult Conrected. Removed, or ASME Code Stamped installed es or no)

A .3 Corrected, 0 No 1-MCA-FW-H157 Duke Power 21795 N/A N/A N/A 0 Removed,

__._._.-3._,0 Installed 0 Yes B 0 Corrected, 0 No 1MCA-FW-H157 Duke Power 14948 N/A N/A N/A 03 Removed, 0 Installed 0 Yes C 0 Corrected, 0 No O Removed, D

_ _ O Installed 0 Yes 0 Corrected,- 0 No

0. Removed, E

- . 3 Installed 0 Yes 03 Corrected, 0 No 03 Removed, F

. 0 3 Installed 0 Yes 0 Corrected, 0 No 0 Removed, 0

3 Installed 03Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced Snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exempt0Z Pressure PSig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed - FL Grass Jr.QA Tech Specialist Date . 1,_2A/2WY _

Owner of Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvivana and employed by HSB CT have inspected the copponents described in this Owner's Report during the period V09to 3/2 Z/ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this erome F Swan Commissions PA2759. N.I National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REF . .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The i'rovislons Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv Ia. Date March 23. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 61 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Combanv 3a. Work Order #: 98555757 Address: 526 S. Church Street. Charlotte NC 28201 -1006 Repair Orgenization,JobS Type Code Symbol Stamp: N Authorization No. N/A Expiration Date: N/A 3b. NSM or MM N/A

4. (a) Identification of System: FW - Refueling Water 4. (b) Class of System: B

5. (a) Applicable.Constnictlon Code: ASMEIII I 921 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components: -

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of component . Name of Mfg Mfg Serial No. National Board No. Other ldentiflcatlon Year Built Corrected, Removed, or ASME Code Stamped

-  : Installed; (yes or no)

A 03 Corrected, 0 No 1-MCA-FW-H134 Duke Power 18159 N/A N/A N/A El Removed,.

. - 0 Installed . 0 Yes B  : 0 Corrected, El No 1-MCA-FW-H134 Duke Power. 20724 N/A N/A N/A 0 Removed,.

C

.__________ _0 Installed 0 Corrected, 0Yes El No 1-MCA-FW-H134 Duke Power 14769 N/A N/A N/A E0 Removed,.

._ . -_._ -:.. 0 Installed . Yes D 0 Corrected,. El No 1-MCA-FW-H134 Duke Power 21767 N/A N/A -NMA 0 Removed,

_ . .- . __ .T0 Installed 0 Yes E 0 Corrected, 0 No 03 Removed, F

_0

. . 0 Installed 0Yes Corrected, 0 No 03 Removed,

.I . . . _ 0Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced Snubbers

8. Tests Conducted:Hydrostatic 0 Pneumatic EJ Nom. Operating Press. E Other a ExemptEs Pressure Sig Test Temp. OF Pressure psig Test Temp. OF Pressure Sig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed '. FL Grass Jr.QA Tech Specialist Date Owner O ergs Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CThave inspectedjthe components described in this Owner's Report during the period

.$1/SDi2 to -3/Z.3/A2j/; and state that to the best of my knowledge and belief, the Owner has performed examirations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection>/

Jerome F Swan Commissions PA2759. N-National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REP . .OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv la. Date March 21.2004 526 S. Church Street. Charlotte, NC 28201-1006 Sheet I of 1 M. N S

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Company. 3a. Work Order #:

Address: 526 S. Church Street. Charlotte NC 28201-1006 Re~er Orgarnlzatdon Job U Type Code Symbol Stamp: MI Authorization No. NA Expiration Date: N/A 3b. NSM or MM #:* N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B

5. (a) ApplicableConstructlonCode:ASMEI.l1 9fEdition, SummerandWinterAddenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Correted, Removed, or ASME Code Stamped

-__ __ __ __ __ __ __ __ __ __ __ _Inetafted (yes or no)

A 03 Corrected, El No -

1-MCA-NV-H464 Duke Power 14803 N/A N/A N/A 0 Removed, 0

3 Installed 0Yes B 0 Corrected, 0 No 1-MCA-NV-H464 Duke Power 21749 N/A N/A N/A 0 Removed, et Installed 03 Yes C 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes D 0 Corrected, 0 No 0 Removed, l 0 Installed 0 Yes E 0 Corrected, 0 No 0 Removed,

.  : 0 3 Installed 0 Yes F 0 Corrected, 0 No 0 Removed, O Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure p sig Test Temp. OF Pressure psig Test Temp. OF Pressure _psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed - f a FL Grass Jr.QA Tech Specialist Date /2 Owner oKOwner's Designee, Tite CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvana and employed by HSB CT h ve )nspected he omponents described in this Owner's Report during the period Tl'/o7l to W M /oL; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furtherm re, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this inspection.

ns t er ome F Sw an Commissions PA2759. N-I Inspecto gnapuro National Board, State, Province and Endorsements Date '312.7Z10,>

Page 2 of 2

FORM NIS-2 OWNER'S REI . ,-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power CorrDian Ia. Date March 21. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGulre Nuclear Station 12700 Haaers FerrV Road. Huntersville, NC 28078 2a. Unit: M1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. WorkOrder#:, 98555763 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job

• Type Code Symbol Stamp: NAL Authorization No. SAL Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for RepalrI Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg - Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

_____ .__,__*__.__.__- _.__. Installed 'e aor no)

A 03 Corrected, 0 No 1-MCA-NI-H83 Duke Power 14809 N/A N/A . N/A El Removed, B

.3C . . .

. Installed 0 Corrected, 0Yes 0 No 1-MCA-NI-H83 Duke Power 21685 N/A N/A N/A 0 Removed,

_ . . . . . . El Installed 0 Yes C . . 0 Corrected, 0 No 03 Removed,

. . 0 Installed 0 Yes D 0.Corrected, 0 No 03 Removed,

.3 . . . . .  ; __ Installed 0 Yes E 0 Corrected, 0 No 0 Removed, F

. . . 0Installed 0 Yes 0 Corrected, 0 No 0 Removed,

. 0 3 Installed 0Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptIO Pressure psig Test Temp. OF Pressure p Sig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed A<ea FL Grass Jr.OA Tech Specialist Date Owner'6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvana and employed by HSB QT'havp inspected he gomponents described in this Owner's Report during the period 3~71 Po Yt to 31221 t; and state that to the best of my knowledge and belief, the Owner has performed elamihati6ns and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injfry or property damage or a loss of any kind arising from or connected with this 4 inspection nmnnn F Swan Commissions PA2759- N-1

/ inspectoefeOnature National Board, State, Province and Endorsements 6 Date 1-I Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code SectIon Xl

1. Owner Address: Duke Power Companv -- Ia. Date March 9.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station -

12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power ComQanv 3a. Work Order #: 98577242 Address: -526 S. Church Street. Charlotte NC 28201-1006 Repir Organizalon Job #

Type Code Symbol Stamp: NEA Authorization No. N/A Expiration Date: N!A 3b. NSM or MM #:* N/A

4. (a) Identification of System: CF - Feedwater 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME-I1 19Zj Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Secton Xl Utilized for Repalr! Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 , Column 2 Column 3 Column 4. Column 5 0o1 6' Column 7 Coiumn 8 Name of Component - . Name of Mfg . . - Mtg Serial No. National Board No. Other Identification Year Buitt Corrected. Removed, or ASME Code Stamped

. _._-_,____._._._._._._Installed (yes or no)

A El Corrected,; R No 1-MCA-CF-184 Duke Power - 22356 N/A N/A N/A 01 Removed,-

. 0 Installed 0 Yes B 03 Corrected, RI No 1-MCA-CF-184 Duke'Power 17417 N/A N/A N/A 0 Removed,

.Z0Installed 0 Yes C 0 Corrected, 0 No 1-MCA-CF-184 - Duke Power 15862 N/A N/A N/A 0 Removed; 0 Installed 03 Yes D .. Corrected, E No 1-MCA-CF-1 84 Duke Power 18857 N/A N/A N/A 0 Removed, 0 Installed 0 Yes E 0 Corrected, 0 No 0 Removed, I.I o Installed 0Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Wnrie -* I Pinnint-nfl cnihhinre

~11IA t J *~J.~

8. Tests Conducted:Hydrostatic E Pneumatic 0 Nom. Operating Press. 0 Other El ExemptEI Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \04ink FL Grass Jr.QA Tech Specialist -

Date ?2zo /

Owner oeOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 8-7 ' tcid . ..$. .; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described inthis Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

5 InspeM&-Si)Cature R.D. Klein Commissions NC853, N-l National Board. State. Province and Endorsements Date 3dLCL. ° J Page2of2

FORM NIS-2 OWNER'S REPURT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv Ia. Date March 9. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station - -

12700 Haaers Ferry Road. Huntersvllte. NC 28078 2a. Unit: E1l 02 03 OShared (specify Units _

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98578675 Address: - 526 S. Church Street. Charlotte NC 28201-1 006 Repir OrgaNzation Job #

Type Code Symbol Stamp: N9 Authorizatlon No. n! Expiration Date: N/A 3b. NSM or MM #:, N/A

4. (a) Identification of System: CF- Feedwater 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 19ZJ Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair! Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mtg Mtg Serial No. National Board No. Ofter Identification Year Buit Corrected, Removed, or ASME Code Stamped

__-_ ____Inftafed (yes or no)

A .. 03 Corrected, 0 No 1-MCA-CF-206 Duke Power 22411 N/A N/A N/A M Removed,

_3_ - . . o Installed 0 Yes B 03 Corrected, El No 1-MCA-CF-206 Duke Power 22250 N/A N/A N/A 0 Removed,

_ . . . l0 Installed 0 Yes C -. Corrected, El No 1-MCA-CF-206 Duke Power 19000 N/A N/A N/A El Removed,

0. Installed 0 Yes D 0 Corrected, El No 1-MCA-CF-206 Duke Power 15916 - N/A N/A N/A 0 Removed, El Installed 03 Yes E ;3 Corrected, 0 No 0 Removed,

_ -- - . _3O Installed 0 Yes 0 Corrected, 0 No I 0 Removed, I

_ - 0 Installed 03 Yes Page 1 0172

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in.x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work- Replaced snubbers

8. Tests Conducted:Hydrostatic 0 Pneumatic a Nom. Operating Press. 0 Other 5 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of Authorization No. N/A Expiration Date N/A Signed X ig Q FL Grass Jr.OA Tech Specialist Date .1e Owner Owners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period

'T70 v toIl0 -By:and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853. N-I nispecgnature National Board, State, Province and Endorsements Date L(U ,

Page 2 of 2

FORM NIS-2 OWNER'S REf OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power ComDanv la. Date Aodl 4. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units,

3. Work Performed By: Duke Power Companv 3a. Work Order #: 98580705 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair OrgaNzatfon Job #

Type Code Symbol Stamp: NSA Authorization No. IAA Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASMEIIJ 19Zj Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 - Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mtg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

__._. _ ._._._._Installed (yes or no)

A 03 Corrected, 0 No 1NCVA0002 Crosby N56925-00-002 26 N/A 1974 S Removed,

. . . l _ . . O Installed 0 Yes B 0 Corrected, 0 No 1NCVA0002 Crosby N56925-00-003 27 N/A 1974 0 Removed, 0 Installed 0 Yes C 03 Corrected, 0 No

.O Removed,

. . . - .O0 Installed - 0 Yes D 03 Corrected, 0 No

0. Removed,

__ 0Installed 0Yes E 0 Corrected, 0 No 03 Removed,

. . . 0 Installed 0Yes F 0 Corrected, 0 No 03 Removed,

. . 0 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced valve and 8 studs with nuts

8. Tests Conducted:Hydrostatic 0 Pneumatic a Nom. Operating Press. Ed Other 0 ExemptOl Pressure 2235 psig Test Temp. 557 OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks Test performed on procedure MP/0/A/7650/076 per work order 98581347/ 01 (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of A thorization No. N/A Expiration Date N/A Signed )w FL Grass Jr.OA Tech Specialist Date Signed N Owner or (wrer's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HS3 CT hav inspected thepomponents described in this Owner's Report during the period 3//o/ 0 to C/5/OK; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermor neither the Inspector nor his employer shall be liable in any manner for any personal inju property damage or a loss of any kind arising from or connected with this inspection./

me F Swan Commissions PA2759, N-l Inspector,s fi re National Board, State, Province and Endorsements

( Date A Page 2 of 2

(.

7-

-'GOSSYT & VALVE G& GA Coa 4.. I.-

.. ~ W RE UT H1t%.l, ?dAGSS

-FORM. VV-1 FOR SATETY.A.1:, SAFETY RELlIE VALVES Q.C As requiired by the Provissor~s of the ASMrE Code Rules DATA REPORT 3-27 Safety and Safetv flelitf Valves I ,r.cwre By Crosby Valve & (ace Companv, 43 Kendrick St., Wrentha,,

6M16 IIB-BP-86 Name and ,ddress

, h 5.6-56925 Order No. N-3005S0 Contract Date 2/12/73 Duke Power Comzpany 2.tMar.utacittredFor- .Carl!tlte, liorth C<.rnlinn OrderNt.. A-33957 Name and Adress

,.Oncr Duke Power Cer.panv, 422 South Church St.. Charlotte, North Carolina 28701 Name and Address 4 Location oaplant MrcGuire tNuclear Station Unit ,1i,Cowtans Ford, North Carolina

5. Valve Identification 1-NC-3 Sertal No. N56925-00-0003 Drawing no. DS-C-56925 Rev. 0 2.154 Type Safety Orifice Size I1 Pipe Stzc_ _ iniet 6j. outlet 6 Safetv.Slfetv Relief.Fibot.Power Actuated Inch Inch Incl Ins Ia

6. Set Pressure (PSIG) 24R5# 700 Ra.,ed Term.lC:J ure r

Stamped Capacity 420006f-/hr. .- 3 -; overIpressuire 3_ fHl~rjwdnAn s ~j, 124 Ilydrostztic Test (PSIG) Inlet 475 L Complete Valve 75_ _

7. The rnaterial. design. construction and workmanship complv with ASME Code. Sectiot; 111.

Class

• I Edition 1971 Addenda Date Vinter 1972 Pressure Contzininr o- Pressure Retaining Corr.ponents Serial No. m* terial Specilicatiori

a. Castings Identification Including Type or Gr.ad ASTM A-351-72 Gr. CFSM Body h'90397-31-0001 ASME SA-351 Cr. CFS ___

ASTI4 A-105-71 Gr. II Bonnet N90353-34-0014 ASME SA-1.05 Gr. II

b. Bar Stock and ror;ings Support Rods N~ozzle i9Q39-9=32-QQ5.5 As ~ ULU G0 F Disc Inscrt Top N9;)3'0 -3. -Cf29 ASTHl A-105-71 (.I-. II Spting Washers Bottom .LCfl3.5 i-,

632zf l.) -A S A& - i 05 J T: _ _ _ _ _

AS-f A-rliL Gr. IU6 Adjustin: Bolt N90351 00-42

• ASME SA-193 Cir. ____6 I;90354-34-0O]9 A S A-SL- I I C - __ __ _

Spindle AS11h A-276-72 Type 440 Spindle Ball N90355-0019 AS4lSA-276 4~L~

I40 I --.- -- ---

0 T A DUKE POWER COMIPANJY DESIGN ENGINEERING DEPARTMENT VENDOR QUALITY ASSURANCE CERTIFICATION The listed component(s) or material(s) conform to the requirements of Duke Power Company Specification tfCS-1205.09 rev. I with the approved deviations noted above. The -!A documentation has been comnleted and attached to this form. No later than component or -'aterial shipment, the comolete QA documentation packet is being cransmicted to Du!ke Power Cc;-canv S. K. Blackley, Jr., Chief Engineer, Mechanical £ Nuclear Division C. J. Wylie., Chief Engineer, Electrical Division L. C. Dail, Chief Engineer, Civil &Environmental Division Design Engineering Department P. 0. Box 2178 Charlotte, N. C. 28242 A copy of this comio!eenr 'n'rc:- Qua It. Asurance Certificat;on. forn will be included with shipping papers- and shipped with the ccmponent to Duke Power Cor~pany, at the address des;ignated in the soecification. This is to certify that the item of equ;pment identified above Fully meets the requirements of the above listed specification- including all of the codes, standards, test requirements, and quality assurance renuirements ;nvoked therein.

Y Title __ _ ate _ _

• Form 930.1 P~ev. ;

DUKE POWER COMPANY DESIGN ENGINEERItIG DEPARTMENT VENDOR QUALITY ASSURAUCE CERTIFICATIONI Name of Vendor Crosby V1yve & m-ir Compan. Item No.

Address of Vend or Plant Wrenthnmir mass 0?0g1 Spec. 1`o.0acS-1205.p9 Rev.

Component(s) or Material Stepl Sifety ',Mlvp Date 1/1R1/7S Shipping ID No.

Release No. ./

.X,, _

Mill Power Order No. A-33957 Certification Included Yes Full X Partial The following listed tests and inspections have been completed as requi~ed by specification: (If 'partial certification, list materials or components for which certification applies.)

1) Tested in accordanre ,ith rrn-lhy Prne--drrD T-1PArS-0 2) 3)

• Physical and Chernical Analysis Major Repair Records and Chart Design Report Repair NDT _L Nq/A I Stress Report x Hydra (Test Press.-PSIG )

_. x Heat Treatment Cleanliness Radiographic Test Operating Test Ultrasonic Test x Performance Curve N/A Magnetic Particle x ASHE Data Report Penetrant Tests x Personnel Qualif;cations on Record Yx Deviation Record None

.The follo.wing OA Cocumentatio- as recu;red by the specification is attached to' the original cOpy of chis for-.: (if cartial certif;cation, include docurenta-tion applicable only tc, this sDecific s-ipient.)

Valve Document.tion P.ack.-9e Rev. 1 Form 530.1 53G.1 (Continued) Rev.# I

(t Serial No. or Miterial Specific~aton Identification Includir-C Type of Grade.7 C. S,. s-WX-2761-00155 ASTM A-304 Or. 51"felii I

I'I 4. Zi:"tr.g a: pilot Comeponentls nltc 1!oldcr l,'903 56-35-0016 Inconel 718 AXbliM A WJ-41 rflnnnlit Stud 87589 ASM-'-l3A- ,-r- 37 **:

f*.*.

A I;T,-I A - I C!--

' jl Eon:iet Stud Nut 2371 A sX-1§4 C We certify thrt the statemnents cMade in tbis report are correct. * , D DoLte w

• Signed Crosbv Valve & rate Co. _ _ _ _

Manufacturer QA tanaager Certificate of Authorization No. 331 expires .Yiyemberr9, 1974 D'.SIG'; IFO.M*ATION Ohl FILE AT CROSBY VALVE & GAGE COiMPAI,,Y.

DESIG'; REPOR.T 1"O. EC-158.

.~ ,

CERTIFICATE OF SHOP INSPECTIOfl

1. the undersigned. holdirZ a. ralid commission issued by th.e National Board of BJoller ani .

Pressure Vcsseil Inspcc.-rs arna the State e: Province o! and emnployed by MNtut)l Boiler & :;Ic!hi;:2rv Tlsvur.!nce Co Win Llar9 ;Sss -- ttve inspccted the equipmen, descrl ed in this Data Repo-t on 19- and state that to t.c best or .-.v knrn._ledg-e and belief. the wanufactur. r h.s constructed thts equitp inent in accordance with the a;:Fczble Subsections of ASMI: Scction Ill.

By signing this certificate. in.e.:her the Jr.spector nor It:s tn:ployer rnAns any wirzny. ex.

pressed or ir:pited. crincernirm. :ic eqnipnitnt descril'ed in thts Data Rcport.rullhefr:Z2re. nettt;e:

the Inspector ror its employer st.1l1 be liable in an-. rraniner for any persoral injury *- VrOupcrty dirrnue or a loss of any kind -- sitng frcin or ronnected %..;uh0 is ,nic;ectinn.

Date *Factory 1.tiLual Croup of Itnsurance Co.

/ Co.rnis s ons -/_

. (ls~~~~~~~~~~~~~~~~~~~protrl N.....................tflnl!-~tS:;.p ar.I! t.X

FORM NIS-2 OWNER'S RE[ OR REPAIR / REPLACEMENT ACTIVITY As Required By The rrovisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comranv la. Date Anril 7. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: M1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. Work Order #: 98581808 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair organization Jobi Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # _ MGMM-14889

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASMEIII 192j Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xi Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

._I . , . Installed (yes or no)

A 0.Corrected, El No MC-1683-SM-01-R2 Duke Power N/A N/A N/A N/A 0 Removed,

._ . - . . 0 Installed 0Yes B 0l Corrected, 0 No 0 Removed,

. . . . . 0 Installed 0Yes C .0 Corrected, 0 No 0 Removed,

. . . O Installed 0Yes D 0 Corrected, 0 No

0. Removed,

. . . 0 Installed 0Yes E 0 Corrected, 0 No

0. Removed,

. . 0Installed 0Yes F .0 Corrected, 0 No 03 Removed,

. . . 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Modified hanger (item# 11) per MGMM-14889

8. Tests Conducted:Hydrostatic Cl Pneumatic O Nom. Operating Press. l Other O Exemptlo Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 'W"'Q- FL Grass JrOA Tech Specialist Date Owner o(Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT'have ins ected hecomponents described in this Owner's Report during the period 3 4IQ2 loIo A/PL 2..; and state that to the best of my knowledge and belief, the Owner has performed examitations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju r property damage or a loss of any kind arising from or connected with this inspection.

- rome F Swan Commissions PA2759, N-1 Inspector's Peore National Board, State, Province and Endorsements Date Qi Page 2 of 2

FORM NIS-2 OWNER'S RE, .. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv la. Date Avril 4. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1_.L of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrv Road. Huntersville. NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98581808 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repaor Organizafon Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: NIA 3b. NSM or MM 4. AOr!1 lAr_+/-ANAAA 1lu.J I_vI*.AVIIvI

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASMEIII 19Z1Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

-Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identiticaton Year Bulit Corrected, Removed, or ASME Code Stamped

. ___ ____ __ .__ ._ _._ _._ _ .. Installed (yes or no)

A 03 Corrected, 0 No 1-SM-VA-83 Kerotest DAN3-8 35862 N/A 1983 El Removed,.

.__ :_ ._ ._ ._._._. 0Installed 0 Yes B . Corrected,. 0 No 1-SM-VA-83 Kerotest 94EP0073 N/A QA# MC41787: 1995 0 Removed,

. . . PPO# F48512 0 Installed 0 Yes C 03 Corrected, 0 No SM System Duke Power N/A. 17 N/A 1981 0 Removed,

.  : . l0 Installed 0 Yes D 03 Corrected,, 0 No

0. Removed,

. . 0 Installed 0 Yes E 0 Corrected, 0 No

0. Removed,.

. . . 0 Installed 0Yes F 0 Corrected, 0 No 03 Removed,

. . 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Cut out and replaced valve 1SM83 and welds SMl FW28-1, 2 and 6.

8. Tests Conducted:Hydrostatic C Pneumatic 0 Nom. Operating Press. EX Other 0 ExemptS Pressure 1083 psig Test Temp. 560.5 OF Pressure psig Test Temp. _F Pressure psig Test Temp. OF

9. Remarks Test performed per procedure MP/O/NA7650/076 on this work order task 11 (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed i14Aai// FL Grass JrQA Tech Specialist Date g4Lffi/

b~nerrlOwner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT-havp inspected he/components described in this Owner's Report during the period

.3.J1 470' to 12 fol; and state that to the best of my knowledge and belief, the Owner has performed exatniriations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj ry or property damage or a loss of any kind arising from or connected with this inspection. 1

, Jerome F Swan Commissions I, Dnspect r ture National Board, State, Province and Endorsements Date 44A../DX Page 2 of 2

FORM NIS-2 OWNER'S REi .. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv la. Date March 22. 2004 526 S. Church Street. Charotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haners Ferry Road. Huntersvile. NC 28078 2a. Unit: l1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. WorkOrder #: 98581863 Address: 526 S. Church Street. Charlotte NC 28201-1006 RPor Orgnlzaton Jobt Type Code Symbol Stamp: &A Authorization No. N/A Expiration Date: NA 3b. NSM or MM#: N/A

4. (a) Identification of System: NS - Containment Sorav 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME Iil 1971 Edition, Summer and Winter Addenda: N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair ! Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. IdentificatIon of Components:

Column 1 Column 2. Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 -

Name of Component Name of Mtg. Mfg Serial No. National Board No. Otlher Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no)

A 0 Corrected, 0 No Containment Spray Delta Southern Co. 350005-73-1 3394 N/A 1973. 0 Removed,.

Heat Exchanger ._.:_._.__0Installed 0 Yes B 0 Corrected, 0 No 0 Removed,

0. Installed 0 Yes C .0 Corrected, 0 No

0. Removed,

.3 . . . . Installed 0 Yes D . .. Corrected, 0 No

0. Removed, E

_ -. 0Installed 0 Yes E0 Corrected,- 0 No 0l Removed,

_3_ . . . . . Installed 0 Yes F .0 Corrected, 03 No 0 Removed,

. . . 3_Installed 0Yes Page 1 of2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material on the manway

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. _ F Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed /,l , FL Grass Jr.QA Tech Specialist Date _fi46V~ Z

'Omner orOine's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvana and employed byHSB CT av inspectelthe omponents described in this Owner's Report during the period 2 J17122Y to .34lIft2A ; and state that to the best of my knowledge and belief, the Owner hag perormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this inspection.

r6me F Swan Commissions PA2759. N-I Inspector inatuje National Board, State, Province and Endorsements Datez3/ t(2/

Page 2 of 2

FORM NIS-2 OWNER'S REF . . JR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comranv Ia. Date March 25. 2004 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of i

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrv Road. Huntersville. NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. Work Order #: 98581864 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Orgailzetdon Job #

Type Code Symbol Stamp: N Authorization No. t11 Expiration Date: ItA 3b. NSM or MM #, N/A

4. (a) Identification of System: NS - Containment SoraV 4. (b) Class of System: 8

5. (a) Applicable Construction Code: ASMEil 19Zl Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mtg Mfg Serial No. Natlonal Board No. Other Identification Yee Built CoreItaedRemoved,or ASME Code Stamped

- Installed (yS orno A .0 Corrected, 0 No Containment Spray Delta Southem Co 35005-73-2 3395 N/A 1973 0 Removed,.

HX 1B ' Installed E Yes B 0 Corrected, 0 No 0 Removed,

.3 0 Installed 03 Yes C 0 Corrected, 0 No 0 Removed, 0 Installed 0Yes D 0 Corrected, 0 No 03 Removed,

.  : 0 Installed 0Yes E . 0 Corrected, 0 No

, 0 Removed,

_ 0Installed 03Yes F 0 Corrected, O No 0 Removed, -

0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work ReDlaced bolting material in the manway

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. El Other 0 Exempto Pressure psig Test Temp. OF Pressure .Sig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.QA Tech Specialist Date Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB Crhavnspected m onents described in this Owner's Report during the period

/-2/1L to A  ; and state that to the best of my knowledge and belief, the Owner ha's perdormed examinatiors and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore neither the Inspector nor his employer shall be liable in any manner for any personal injuryAd property damage or a loss of any kind arising from or connected with this (7nspection. m n7 x l. erome F Swan Commissions PA2759. N-I

/ nspector' 0 National Board. State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REF . .-0R REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv la. Date March 26. 2004 526 S. Church Street. Charlotte. NC 28201-1 006 Sheet_ 1 of I

2. Plant Address: McGuire Nuclear Road. ne 12700 Hagers Ferry Road, Huntersville. NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order # 6oQO'Y7AA Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair organization Job i Type Code Symbol Stamp: N/A Authorizatlon No. L/A Expiration Date: 1NA 3b. NSM or MM #:_ N/A

4. (a) Identification of System: NF - Ice Condenser Refriaeration 4. (b) Class of System: B

5. (a) Applicable Constructlon Code: ASiviE 11119l EditIon, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of SectIon Xl Utilized for Repair/ Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Cal 6 Column 7 Column 8 Name of Component Name of Mig Mig Serial No. National Board No. Other Identification Year Buit Corrected, Removed, or ASME Code Stamped

- . .,_._. Installed (yes or no)

A 03 Corrected, 0I No 1-MCR-S-NF-100- Duke Power 20508 N/A N/A N/A 0 Removed, 01-I __ Installed 0 Yes B 0 Corrected, 0 No 1-MCR-S-NF-100- Duke Power 00087 N/A N/A N/A 0 Removed, 01-I __ Installed 0Yes C 0 Corrected, 0 No 0 Removed, O0Installed 0 Yes D 0 Corrected, 0 No

.* 0 Removed,

_ OInstalled 3 Yes E 03 Corrected, 0 No 03 Removed,

. 0 Installed 0Yes 03 Corrected, 0 No 0 Removed,

- 0 Installed 0Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptIl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturees Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed\ FL Grass Jr.QA Tech Specialist Date 3 /6s1-

~' Aoiier opOwner's Designee, Ttle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by HSB CT bavejnspectedthe Components described in this Owner's Report during the period 3/25/o:0Y to R/Z61°g; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury property damage or a loss of any kind arising from or connected with this inspection.

erome F Swan Commissions PA2759. N-I Inspectors pyIwiatf National Board. State. Province and Endorsements Date /41 /

Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv Ia. Date March 18. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of I

2. Plant Address: McGtuire Nucl ear 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units -)

3. Work Performed By: Duke Power Comoanv 3a. Work Order #:, 98583741 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repalr Organizagon Job U Type Code Symbol Stamp: SL/ Authorization No. NA Expiration Date: NIA 3b. NSM or MM # _ N/A

4. (a) Identification of System: NM -Nuclear Sampling 4. (b) Class of System: 1

5. (a) Applicable Construction Code: ASME IlI 1971 Edition, Summer and Winter Addenda, NIA Code Cases (b) Applicable Edition of Section Xl Utilized for Repair /Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Comp6nents:

= Column 1 Column 2 - Column 3 Column 4' Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other identification Year Built Corrected, Removed, or ASME Code Stamped

_ _ _ _ _ __ __ __ ___ __ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ __ _ __ __ __ __ _ _In sta lled (y e o r' no )

A . 0 Corrected,- E0No 1-MCR-NI-912 Duke Power 14778 N/A N/A N/A 0 Removed, W

. . l O Installed 0 Corrected, 03Yes El No 1-MCR-NI-912 Duke Power 19542 N/A N/A N/A 0 Removed,

_ . El Installed - Yes C 0 Corrected, 0 No 0.Removed,

. 03Installed 0 Yes D ,. Corrected, 0 No 0 Rermoved,

. _ 0 Installed 0 Yes E 0 Corrected, 0 No 1

0 Removed,-

. __ 0 3 Installed 0Yes T Corrected, 0 No 0 Removed,

.0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in.x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exempto Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPUANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed - FL Grass Jr.QA Tech Specialist Date

'owner 9a"OWner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period to /!9XF; and state that to the best of my knowledge and belief, the Owner has perlbrmed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853, N-I lnspec~o'T~'Sqinature National Board. State, Province and Endorsements Date Page 2 of 2

FORM NIS-2 OWNER'S REF . . JR REPAIR / REPLACEMENT ACTIVITY As Required By The t-rovisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date March 21. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 032 03 OShared (specify Units _

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98583742 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organizon Job S Type Code Symbol Stamp: S/ Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #- N/A

4. (a) Identification of System: NI - Safety Inlection 4. (b) Class of System: B.

5. (a) Applicable Construction Code: ASME lIl 19.1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of component Name of MWg Mfg Serial No. National Board No. Other Identification Year Buift Corrected. Removed, or ASME Code Stamped

- Instafted (yes or no)

A 03 Corrected, 0 No 1-MCR-NI-912 Duke Power 20585 N/A N/A N/A 0 Removed,

._ ._ ._ . ,. Installed 0 Yes B . 0 Corrected, 0 No 1-MCR-S-NI-912 Duke Power 20596 N/A N/A N/A 0 Removed,.

. - Installed 0 Yes C 0 Corrected, O No 03 Removed,

. . .3. O Installed 0 Yes D 03 Corrected, 0 No 0 Removed, 03 Installed 0 Yes E l 0 Corrected, 0 O No

. 0 Removed, 0 Installed 0 Yes F 0 Corrected, 0 No 03 Removed,

- 03 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic O Nom. Operating Press. 0 Other O ExemptlA Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed X A/a@,2 FL Grass Jr.OA Tech Specialist Date e 12,°S Owner otineresDesignee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSI3

_C haye inspecte the omponents described in this Owner's Report during the period L3K'&/f2L to34z /OgL; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this inspection.

9 Inspecto a

gnatur 7 rome F Swan Commissions PA2759, N-I National Board, State, Province and Endorsements 6 Dato c3 22/

Page 2 of 2

FORM NIS-2 OWNER'S REF . .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Companv Ia. Date March 21. 2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet 1_.L of I

2. Plant Address: McGuire Nuclear Station 12700 Hagers Fen' Road. Huntersville, NC 28078 2a. Unit: Ml1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comnanv 3a. Work Order #: 98584799 Address: 526 S.Church Street. Charlotte NC 28201-1006 Repair Organizion Job i Type Code Symbol Stamp: E/ Authorization No. N/A Expiration Date: M 3b. NSM br MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME II 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xi Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7. Column 8 Name of component Name of Mfg Mfg Serial No. National Board No. Other Identifcaftfon Year Built Corrected. Removed, or ASME Code Stamped Instaned (yes or no)

A 03Corrected, 0 No 1-MCA:-NV-1 01 1 Duke Power 18066 N/A N/A N/A 0 Removed,!

.__. . . . . .0 Installed 0Yes B 0 Corrected,, El No 1-MCA-NV-1 0 1 Duke Power .21525 N/A N/A N/A 0 Removed,

. . . . ._ .0 Installed 0Yes C 03Corrected, 0 No 03Removed,

_ -  : . O Installed 0 Yes D 03Corrected, 0 No 0l Removed,

. . _3. O Installed 0 Yes E 0 Corrected, 0 No 0 Removed,

. . 0 Installed 0Yes F Corrected, 1ONo 0 Removed,

. 0 3 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exemptil Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure -psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code. Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed OFL gX Grass Jr.OA Tech Specialist Date 3/-f Owner dir Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT'have inspecteq the Components described in this Owner's Report during the period

'U L to Lg42-/; and state that to the best of my knowledge and belief, the Owner had performed ex'ami ations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this inspection.

, - erome F Swan Commissions PA2759, N-I (nspector'p, natuje National Board, State, Province and Endorsements 6 Date 5/Z 2.a '

Page 2 of 2

FORM NIS-2 OWNER'S REPU. ,s . JR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv la. Date March 25.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station  ;

12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: 011 02 03 OShared (specify Units )

3. Work Performeod By: Duke Power Compzany 3a. Work Order #:  : 98584805 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair OrganizOon Job I Type Code Symbol Stamp: m/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Inlection 4. (b) Class of System: A I; . .. . ..

5. (a) Applilable Construction Code: ASME 11119ZI Edition, Summer and Winter Addenda,- N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components: .. 11.

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of MWg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

.____-___.____. ___.___Installed (yes or no)

A 0. Corrected, R No 1-MCA-NI-H612 Duke Power 22048' N/A N/A N/A El Removed,

0. Installed 0 Yes B 03 Corrected, E0 No 1-MCA-NI-H612 Duke Power 20961 N/A N/A N/A 0 Removed, C

__ ___ Installed 0 Corrected, 03 0 No Yes 0 Removed,

. 0 Installed 0 Yes D 0 Corrected, 0 No 0 Removed,

. 0 Installed 0 Yes E 0 Corrected, 0 No 0 Removed,

. . 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed,

. 0 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic l Pneumatic Cl Nom. Operating Press. El Other 0 ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed . - a, FL Grass Jr.OA Tech Specialist Date Owner& Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvana and employed by HSI TShaves inspected tjhe copmponents described in this Owner's Report during the period 3/2/3/04 to 1/4loV; and state that to the best of my knowledge and belief, the Owner has performed exahinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection.

/ Jerorme F Swan Commissions PA2759, N-I Inspecto XI*ure National Board, State, Province and Endorsements Datea I Page 2 of 2

FORM NIS-2 OWNER'S REIt. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv la. Date March 25.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station 12700 Haders Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. Work Order #: 98584806 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair OrganIzatlor JobS Type Code Symbol Stamp: NM Authorization No. n/ Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NC -Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Constriction Code: A$ME I 1I 9Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. 'Other Identification Year Built Coected, Removed, or ASME Code Stamped

__ _ _ _ _ _ __ _ _ _ _ _installed (yes or no)

A .. Corrected, 0 No 1-MCR-NC-H803 Duke Power 16563 N/A N/A N/A 0 Removed,

. 0 Installed 0Yes B 0 Corrected, E0 No 1-MCR-NC-H803 Duke Power 14934 N/A N/A N/A 0 Removed,

_ . .El0 Installed 0 Yes C 03 Corrected, 0 No 0 Removed,

_ . . .3. O Installed - 0 Yes D 0 Corrected, 0 No 03 Removed,

- . .  ; . O0Installed 0 Yes E 0- Corrected, 0 No 03 Removed, 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic El Nom. Operating Press. 0 Other El ExemptIl Pressure psig Test Temp. °F Pressure p Sig Test Temp. _F Pressure psig Test Temp. °F

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 4 Z VI47 FL Grass Jr.QA Tech Specialist Date Owner of Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvfvana and employed by HSB jShavq inspecte the mponents described in this Owner's Report during the period

<L2-5/Q' to 3 /2Z/<L; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthemmpe, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this

-Jerome F Swan Commissions PA2759, N-I

//Ins re National Board, State, Province and Endorsements Date ./ 2 Page 2 of 2

FORM NIS-2 OWNER'S REPOAT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv la. Date March 21. 2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Fern' Road, Huntersville. NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. WorkOrder#:, 98584809 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job

• Type Code Symbol Stamp: N/A Authorlzatlon No. NMA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: -A

5. (a) Applicable Construction Code: ASME Il'19f. Edition, Summer and Winte Addenda, N/A - Code Cases (b) Applicable Edition of Section Xi Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg - Mfg Serial No. National Board No. Other Identwfcatvon Year Bult Corrected. Removed, or ASME Code Stamped

._._._._._ _ _Installed' (yes or no)

A - 0 Corrected, E0No 1-MCR-NC-687 Duke Power 21730 N/A N/A N/A - 0 Removed, O0Installed 0Yes B 0 Corrected, 0 No 1-MCR-NC-687 Duke Power 21227 N/A N/A N/A 0 Removed,

._ , - _ _ _ Installed 0Yes C 0 Corrected, 0 No 0 Removed,

0 Installed 0 Yes D .0 Corrected, 0 No 0 Removed,

_ 0 Installed 0Yes E 0 Corrected, 0 No 0 Removed,

. 0 Installed 03Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes Page I of2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of thie form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. l Other El ExemptOl Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed <,,J2X t-i 1 FL Grass Jr.QA Tech Specialist Date ,

Owner of wner's Designee, Ttle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period Q',EW--Oqto 3 -/q"y:and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Y ea R.D. Klein Commissions NQ853, N-I nspec lture National Board. State. Province and Endorsements Dato3-a l a&OI Y Page 2 of 2

FORM NIS-2 OWNER'S REF .. rFOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv la. Date March 22. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuiclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared(specifyUnits )

3. Work Performed By: Duke Power Comoanv : 3a. Work Order #: 98584819 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repsir Organization Job c

Type Code Symbol Stamp: NA Authorization No. WA Expiration Date: &A 3b. NSM or MM N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME IlI 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repalr / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

C Column 1 - Column 2- Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg . Mfg Serial No. National Board No. Other Iderntllcation Year Built Corrected, Removed. or ASME Code Stamped

, Instatled (yes or no)

A - 0 Corrected,. El No 1-MCR-NC-681 Duke Power 15659 N/A .. N/A N/A El Removed,.

.0 Inistalled 0 Yes B 0 Corrected, 0 No 1-MCR-NC-681 Duke Power. 00192 N/A N/A N/A 0 Removed, 0 Installed 0 Yes C 03Corrected, 0 No

.3 Removed, D ..

I. oInstalled 0 Yes 0 Corrected, 0 No 0.Removed,

.3 . 0Installed 0 Yes E 0 Corrected, 0 No 0.Removed,

.3 . . 0Installed 0Yes 0 Corrected,. 0 No 03Removed,

. . - 0Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptFo Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed m a FL Grass Jr.OA Tech Specialist Owneor Owner's Designee, Title Date _LIa.

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvana and employed by HSB CThavq inspected the omponents described in this Owner's Report during the period 3//6/ y to 3/2VoL/ ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this ninspection. /

e- z /iierome F Swan Commissions PA2759, N-I Inspect 3 ~s~natur? National Board, State, Province and Endorsements Date l/Zi4 Page 2 of 2

FORM NIS-2 OWNER'S REF ., OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Companv la. Date March 26. 2004 526 S. Church Street. Chartotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 0 Shared (specify Units )

3. Work Performed By: Duke Power Comoanv  ; 3a. WorkOrder#: 98584821 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organizatlon Job #

Type Code Symbol Stamp: NA Authorization No. N/A Expiration Date: SA 3b. NSM or MMN: N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME I 19Z71 Edition, Summer and Winter Addenda, NWA Code Cases (b) Applicable Edition of Section Xl Utilized for Repalr/ Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component --Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

._._._._._._._. Installed (yes or no)

A , OCorrected,. S No 1-MCR-NC-565 Duke Power.-' 22184 N/A N/A N/A 1 Removed,

. .- . . 0 Installed a3 Yes B 0 Corrected, 0 No 1-MCR-NC-565 Duke Power 21750 N/A N/A N/A 0 Removed,

. . . El Installed 0Yes C .0 Corrected,. 0 No

0. Removed, D

.31 .. 0Installed 0Yes 0 Corrected, 0 No 03 Removed,

_ .. ,_ , OInstalled OYes E 0 Corrected, 0 No 0 Removed,

. . . . .3O Installed 0 Yes F .. Corrected, 0 No 03 Removed,

. . . 0 Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic C] Pneumatic 11 Nom. Operating Press. 11 Other El ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure Sig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed xj 4 FL Grass Jr.QA Tech Specialist Date /,

Owner opOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by HSI CT Av inspected the c9mponents described in this Owner's Report during the period 3// 7 to 3 and state that to the best of my knowledge and belief, the Owner h prformed es examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermoe, neither the Inspector nor his employer shall be liable in any manner for any personal injur,br property damage or a loss of any kind arising from or connected with this inspection.

O/ krLeFrome F Swan Commissions PA2759. N-I Inspector, ecyturp National Board. State, Province and Endorsements Date ee Page2of2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power ComDanv la. Date March 16. 2004 526 S. Church Street, Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrv Road, Huntersville. NC 28078 2a. Unit: E1l 02 03 CiShared (specify Units _ _ )__

3. Work Performed By: Duke Power Comoanv - 3a. Work Order #: 98584823 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repalf Organtization Job #

Type Code Symbol Stamp: NAA Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: NC- Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME I 19Z71 Edition, Summer and Winter Addenda, NMA Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. .Other Identification Year Buit Corrected, Removed, or ASME Code Stamped

. . .Installed aor no)

A 0. Corrected, 0 No 1-MCR-NC-562 Duke Power 20653 N/A N/A N/A 01 Removed,

.3 0 Installed 0Yes B 0 Corrected, 0 No 1-MCR-NC-562 Duke Power 20607 N/A, N/A N/A 0 Removed, C

. . 0 Installed 0Yes 0 Corrected, 0 No 0 Removed,

_ . O Installed 0 Yes D 0. Corrected, 0 No 03 Removed, E

0listalled 03Yes 0 Corrected, 0 No 0 Removed, F

. 0 Installed. 0Yes 0 Corrected, 0 No 0 Removed, 0 Installed 0Yes Page 1 of2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in.x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of thi form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic C Pneumatic E Nom. Operating Press. El Other 5 ExemptlO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed f7 FL Grass JrQA Tech Specialist Date Owner op-ower's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period iIZ P4 to TAŽ2 ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853, N-I Ins to nature National Board, State, Province and Endorsements Date 3-17 R 9 Page2of2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date March 16. 2004 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of 1

2. Plant Address: Mc(;uire Nuclear Station .' -

12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 O3Shared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. WorkOrder#: 98584824 Address: 526 S. Church Street. Charlotte NC 28201-1006 RepoairOrganization Job I Type Code Symbol Stamp: N/A Authdrization No. N!!A Exiration Date: NIA 3b. NSM or MM #: N/A

4. (a) Identification of System: NC - Reactor Coblant 4. (b) Class of System:A A

5. (a) Applicable Construction Code: ASME 1111971 Edition,, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 - Column 3 Column 4 } Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mtg W g Serial No. National Board No. other identification Year Buin Corrected. Removed, or ASME Code Stamped Installed (yes o no)

A . 0 Corrected, 0 No 1-MCR-NC-561 Duke Power 21240 2 N2A0 N/A N/A 0 Removed,

______0Installed 0Yes B 03 Corrected, 0 No 1-MCR-NC-561 Duke Power 21787 N/A N/A N/A 0 Removed, C

_0 Installed 0Yes 0 Corrected, 0 No lO Removed,

, OInstalled 3 Yes D . 0 Corrected, 0 No 0 Removed, E

0 Installed 0Yes 0 Corrected, 0 No 0 Removed, F

03 Installed 03 Yes 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of U' form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. E Other E Exempt0 Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed data Owner FL Grass Jr.OA Tech Specialist Owner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3/~'b-S9~ to i-n7-O cL ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853. N-I inspedf6iortSidgnature National Board. State, Province and Endorsements Date 3-A+/-2sŽ Io Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date March 17.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrv Road. Huntersvilie, NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv  : 3a. Work Order #: 98584825 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair ftamntzaiion Job I Type Code Symbol Stamp: N/A Authorization No. NIA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NC- Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME III 1 9Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair /Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. IdentificatIon of Components:

= Column I Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification yearBult Corrected. Removed, or ASME Code Stamped Intafled (yes or no)

A 0 Corrected, E0 No 1-MCR-NC-559 Duke Power 18069 N/A N/A N/A 0 Removed, O3 Installed 0 Yes B 0 Corrected, 0 No 1-MCR-NC-559 Duke Power 14804 N/A N/A N/A 0 Removed,

. - El Installed 0Yes C 0 Corrected, 0 No 03 Removed, D

E3 Installed 0Yes 0 Corrected, 0 No 03 Removed, 03 Installed 0Yes E 0 Corrected, 0 No 0 Removed,

_ 0 Installed 0Yes F 0 Corrected, 0 No 0 Removed,

_ 0 Installed 3 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Wo Hek Ponlnr'cd

. I' v enubihber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptE[

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed A7s FL Grass Jr.QA Tech Specialist Date Owner r Owners Designee, Titie CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period

'3=0 to .3f-.*4$; and state that to the best of my knowledge and belief, the Owner has perforined examinations and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NQ853. N-I Inspectors 8inature National Board, State. Province and Endorsements Date Lj a 09 Pagc2 of 2

FORM NIS-2 OWNER'S REPAiST FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv Ia. Date March 16. 2004

. . t . t .

526 S. Church Street, Charlotte. NO 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuclear Station 12700 Haoers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units -_)

3. Work Performed By: Duke Power Comoanv - 3a. Work Order #: 98584826 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repelt Organization Joba Type Code Symbol Stamp: N/A Authorization No. N/S Expiration Date: N/A 3b. NSM or MM #. N/A

4. (a) Identification of System: NC-.ReactorCoolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASMEII 19Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

_ Column 1 Column 2- Column 3

• Column 4 Column 5 Col 8 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed' (es or no)

A  ; 0... Corrected, E l No.

1-MCR-NC-557 Duke Power 20242 N/A N/A N 0ARemoved, r

_ . 0 Installed 0 Yes B 0 Corrected, 0 No 1-MCR-NC-557 Duke Power - 20842 N/A N/A NIA 0 Removed, C

_ _ Installed l_ I__ 0Yes 0 Corrected, 0 No

0. Removed, D

. . _ 0 Installed 0Yes 03 Corrected, 0 No

. 0 Removed,

.] . 0 Installed 0Yes E 0 Corrected, 0 No 0 Removed, I 0Installed 0Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of thik form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic O Nom. Operating Press. Cl Other O ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 66e2 FL Grass JrQA Tech Specialist Date _1//C/: 'i Owner 4 Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owners Report during the period 3 0to 327j q  ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

JA 1AA R.D. Klein Commissions NC853. N-I Ins*Yor's ignature National Board, State. Province and Endorsements Date 2z12. i-01o/

Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv - - la. Date March 16. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGu1 r Nuclear s StationR .

12700-Heaers Ferry Road,-Huntersville. NO 28078 2a. Unit: 01 012 03 OShared (specify Units ) I I

3. Work Performed By: Duke Power Company. 3a. Work Order #: 98584828 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Jobe Type Code Symbol Stamp: L Authorization No. N/A Expiration Date: MIA 3b. NSM or MM #:_ N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Constniction Code: ASME III 19Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xi Utilized for Repair Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. identification of Components:

LColumn 1 Column 2' - Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mtg Mfg Serial No. National Board No. Other Identification Year Built Corrected. Removed, or ASME Code Stamped

_ ___ _ __ _ __ _ ___ __ _ ___ __ _ __ _ __ __ __ __ _ __ __ __ __ _ _ _ _ __ _ _ ___ __ ___ ___ __ _ _n__ __ ___ __ ___ _(ystasedo ore ono A .3 Corrected,. 0 No 1-MCR-NC-551 Duke Power 16588 N/A N/A N/A l Removed,

3 . . --., . . Installed ' 3 Yes B 01 Corrected, El No 1-MCR-NC-551 Duke Power 18174 N/A N/A N/A 0 Removed,

. 0 Installed - 0Yes C . 0 Corrected, 0 No

0. Removed,

__ E. Installed 3 Yes D 0 Corrected, 0 No

.: Removed,

.. .. Installed 01Yes E . 03 Corrected, 0 No 03 Removed,

.3  : -.. -. . Installed 03Yes F 0 Corrected, 0 No 3 Removed,

. _3_ . . . . ._ . . . Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic a Nom. Operating Press. 0 Other 0 ExemptlI Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPUANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.i A Tech Specialist Date &

Owner or wer's Desigee, Titie CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period IRC2*L to :2  ; an state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853, N-I Inspecio'rSignature National Board, State, Province and Endorsements Date 3- /7 2COY Page 2 of 2

FORM NIS-2 OWNER'S REI -.. OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date March 21. 2004

- 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station -'

12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 012 03 OShared (specify Units )

3. Work Performed By: Duke Power ComDany, 3a., Work Order #:. 98584829 Address: 526 S.Church Street. Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: NIA Authorization No. NIA Expiration Date: N/A 3b. NSM or MM NIA

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME iII 19j. Edition, Summer and Winter Addenda, N/,A Code Cases (b) Applicable Edition of Section XI Utilized for Repair ! Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

l Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mtg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

-Installed (yes o no)

A 03Corrected,- 0 No 1-MCR-NC-549 Duke Power 15680 N/A N/A N/A 0 Removed,:~

0 Installed 0 Yes B 0 Corrected, 0 No 1-MCR-NC-549 Duke Power 21183 - N/A N/A N/A 0 Removed,

. _ -_ .__. Installed 0Yes C 0.Corrected, 0 No 0 Removed,

__ Installed 0 Yes D 0 Corrected, 0 No 0-Removed,

. . . 0 Installed 0 Yes E 0 Corrected, 0 No 0.Removed,

_ . 0 Installed 0Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 0Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -JAX-0 FL Grass J r,QA Tech Specialist Date /m/2 A-Owner pf Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CTjiaveinspecte thepomponents described in this Owner's Report during the period

.d3 /J to 02 : and state that to the best of my knowledge and belief, the Owner Z? °S; has perormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for rl any personal injup or property damage or a loss of any kind arising from or connected with this R inspection.

Q..a-7 *,Iro,41romeF Swan Commissions PA2759. N-I Inspector' qfihatyre National Board, State, Province and Endorsements Date z

/ 72Q jji Page 2 of 2

FORM NIS-2 OWNER'S REF . .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv Ia. Date March 26. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrv Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3, Work Performed By: Duke Power Compan v 3a. Work Order #: 98584831 Address: 526 S.Church Street. Charlotte NC 28201-1006 RepaIr Orgartfzation Job #

Type Code Symbol Stamp: M Authorization No. N/A Expiration Date: M/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Inlectiorn 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME 1II 9Zj Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports) 4

6. Identification of Components:

l Column 1 l Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component ,Name ofMfg Mfg Serial No. National Board No. : Other IdentificatIon Year Built Corrected, Removed, or ASME Code Stamped

._ ._._._._.Installed (yes or no)

A 03 Corrected, El No 1-MCR-NI-786 Duke Power 14874 N/A- . N/A N/A 0 Removed, B

._ -_ - . .  ; . Installed 0Yes 03 Corrected, 0 No 1-MCR-NI-786 Duke Power 21456 N/A N/A N/A 0 Removed,

. .0 . - . Installed 0Yes C 0 Corrected, 0 No

-, . 0 Removed,

. . . . . . O Installed 0Yes D 03 Corrected, 0 No 0 Removed,

_ _ . . , 0 Installed 0Yes E 0 Corrected, 0 No

0. Removed,

.3. 0 Installed 0 Yes F 0 Corrected, 0 No 0l Removed,

. 3_Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this repoq is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Pinnlnnrid -niihhpr

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed v 44a FL Grass Jr.QA Tech Specialist Date 3"

~Oeerri Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed by HSB CT Pave inspectedAthe Components described in this Owner's Report during the period

V3/2 Yj to 3/2?'/1 .; and state that to the best of my knowledge and belief, the Owner has performed ex'aminations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Jeroerome F Swan Commissions PA2759, N-I Inspector's Wa re National Board, State, Province and Endorsements

( Date 3--/-

Page 2 of 2

FORM NIS-2 OWNER'S REF .. .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv la. Date Adril 1. 2004 526 S. Church Street. Charlotte. NC 28201 1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: E01 02 03 OShared (specify Units :_)

3. Work Performed By: Duke Power Comoanv 3a. Work Order#:

Address:' - 526 S. Church Street. Charlotte NC 28201-1006 Repair Organl~lon Job9 Type Code Symbol Stamp: M/A Authorization No. N/A Expiration Date: NIA 3b. NSM or MM # NIA

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B

5. (a) Applicable Construction Code ASE ll 1971 Edition,' Summer and Winter Addenda, NIA Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

l Column 1 Column 2 Column 3 Column 4 - Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identificaton Year Built Corrected, Removed, or ASME Code Stamped

._._____._._._._.__._.Installed (ves or no)

A El Corrected, El No 1-MCR-CA-H376 Duke Power N/A N/A N/A N/A 0Removed,.

03 Installed 0 Yes B 0 Corrected, 0 No 0 Removed, 03 Installed 03 Yes C 0. Corrected, 0 No

0. Removed,

. 0 Installed 0 Yes D 0 Corrected, 0 No 0 Removed,

. . : . . .0 Installed 0 Yes E .. 0 Corrected, 0 No 03 Removed,.

_ . . .3.Installed 0Yes F 0 Corrected,, 0 No 0 Removed,

. . . 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced load pin

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exempt1l Pressure p sig Test Temp. OF Pressure psig Test Temp. OF Pressure pSig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed - 69,> FL Grass Jr.QA Tech Specialist Owner o Owner's Designee, Title Date // Z) t CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HS3 Chavq inspected the components described in this Owner's Report during the period

-/a /OJ to L

/LL  ; and state that to the best of my knowledge and belief, the Owner hds performed exarniations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this t nO merome F Swan Commissions PA2759, N-I Y;re National Board, State, Province and Endorsements 6

Page 2 of 2

FORM NIS-2 OWNER'S REF .-'OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date ADril 4. 2004 526 S. Church Street. Charlotte. NC 28201-1 006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comganv 3a. Work Order#:

Address: 526 S. Church Street. Charlotte NC 28201-1006 RepaIr Organizatfon Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM N/A

4. (a) Identification of System: KC - Comoonent Cooling 4. (b) Class of System: B&C

5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

l Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mtg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

_ _ _ _ __ __ __ -Imtaulled (yes or no)

A 0. Corrected, 0 No 1-KC-VA-394 Kerotest JH1-10 7726 N/A 1975 1 Removed,

._ _ _ _3 . . . _._; _ 0Installed El Yes B 0 Corrected, 0 No 1-KC-VA-394 Kerotest WO1-15 31321 N/A - 1980 0 Removed,

._._._:_El Installed E Yes C .0 Corrected, 0 No KC System Duke Power N/A 38 N/A 1981 0 Removed,

. . Installed 3 Yes D 03 Corrected, 0 No 0 Removed,

[0 Installed 0 Yes E 0 Corrected, 0 No 0 Removed, E30Installed 0 Yes F 0 Corrected, 0 No 0 Removed, l_Installed. 03 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Cut out and replaced 1KC394 valve with welds KC1 F1 102.

KC1 F1 103, and 1KC703-5.

8. Tests Conducted:Hydrostatic Cl Pneumatic 0 Nom. Operating Press. El Other 0 ExemptO Pressure 98 psig Test Temp. 75 0F Pressure psig Test Temp. . F Pressure psig Test Temp. .OF

9. Remarks Test per procedure MP/0/A/7650/076 per task 07 of this work order (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.QA Tech Specialist Date e/M /,

Owner.6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvana and employed by HSB ha ins ectedh co ponents described in this Owner's Report during the period jYL~g/;

3 0to and state that to the best of my knowledge and belief, the Owner has perormed exlaniinatons and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this

- rome F Swan Commissions PA2759. N-I Inspector's ure National Board, State, Province and Endorsements G Date LI/0 Page 2 of 2

FORM NIS-2 OWNER'S REP.. .. .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv 1a. Date March 29. 2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 0 Shared (specify Units )

3. Work Performed By: Duke Power Comoany. 3a. Work Order #: 98602822 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Orgarizetion JobC Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: NV --Chemical and Volume Control 4. (b) Class of System: B

5. (a) Applicable Construction Code:ASMEIII 19ZI Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xi Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 -Column 2- Column 3 Column 4 - Column 5 CoI 6 Column 7 Column 8 Name of Component Name of Mfg Meg Serlal No. National Board No. Other Identification Year Built Co0ected, Removed, or ASME Code Stamped

__. -. Installed' (yes or no)

A El Corrected, 0 No 1-NV-VA-6 Dresser TD3631 7 204 . N/A 1976 0 Removed,[

_ - 0Installed El Yes B 03 Corrected, 0 No 0 Removed, 0 Installed 0 Yes C 0 Corrected, 0 No 0 Removed, a_3Installed 0 Yes D 0 Corrected, 0 No 03 Removed, E

0 Installed 0Yes 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed, O0Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Machined nozzle

8. Tests Conducted:Hydrostatic O Pneumatic El Nom. Operating Press. El Other 11 Exempt[]

Pressure psig Test Temp. _ F Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed / FL Grass Jr.QA Tech Specialist Date -P Owner orOwners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT have inspecte the om onents described in this Owner's Report during the period jZ /o' toZ9 O; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj'ry or property damage or a loss of any kind arising from or connected with this A inspection.

Jerome F Swan Commissions PA2759, N-I o

Ins~ Ator;Sjinature National Board, State. Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provislons Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv la. Date March 17.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: Ei 02 03 OShared (specify Units _)

3. Work Performed By: Duke Power Comoanv  : 3a. Work Order #: 98607887 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job I Type Code Symbol Stamp: NIA Authorization No. M Expiration Date: NIA 3b. NSM or MM #:* N/A

4. (a) Identification of System: SM- Main Steam 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME i 19Z_. Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components: -

l Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mig Mfg Serial No. National Board No. Other Identiflcation Year Built Corrected, Removed, or ASME Code Stamped installed (yes or no)

A El Corrected,-. 0 No 1-MCA-SM-118 Duke Power 21434 N/A N/A N/A 0 Removed,

._ ._ 0 Installed 0 Yes B 0 Corrected, 0 No 03 Removed,

. -. . . .3. .. O Installed 0 Yes C 0 Corrected, 0 No 03 Removed,

_3 0Installed 0Yes D .0 Corrected, 0 No 03 Removed,

_3 0Installed 0Yes E .0 Corrected, 0 No 03 Removed, O0Installed Corrected, 0

0 No Yes F

0 Removed,

. . 0 Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of WorkI Renlaced Divot Din

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exempto Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 2gL FL Grass Jr.OA Tech Specialist Date Owner or owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period

^°o to -f p)9-; and state that to the best of my knowledge and belief, the Owner has performed exaniinattons and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853. N-I Inspei or's nature National Board, State. Province and Endorsements Date 5cQ9 Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv la. Date March 16. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1._ of I

2. Plant Address: McGuire Nuclear Station -

12700 Hagers Ferry Road. Huntersvlle. NC 28078 2a. Unit: 01 02 03 OShared (specify Units ) I I

3. Work Performed By:. Duke Power Companv 3a. Work Order #: 98607888 Address: 526 S.Church Street. Charlotte NC 28201-1006 Repair Organization Job a Type Code Symbol Stamp: M Authorization No. NIA Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: 8

5. (a) Applicable Construction Code: ASMEiII 19Z1 Edition, Summer and Winter Addenda,- N/A Code Cases (b) Applicable Edition of Section Xl Utilized for RepaIr / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7-- Column 8 Name of Component . Name of Mg Mtg Serial No. National Board No.. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

__ _ _ _ _ _ _ _ _ _ _ _ _Inatalled - y so o A . E Corrected, 0 No I-MCA-SM.H119 Duke Power - N/A N/A N/A N/A 0 Removed,

. . . 0 Installed 0 Yes B 0 Corrected, 0 No 03 Removed,

- _ . 0Installed 0Yes C 0 Corrected, 0 No 03 Removed,

. 0Installed 0Yes D 03 Corrected, 0 No 03 Removed,

'  : - 0Installed 0Yes E 03 Corrected, 0 No 03 Removed,

. - - 0 Installed 0Yes F 0 Corrected, 0 No Removed, 0 Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work PpnIlicipri I nqiri Pin (Pivot Pin'l

8. Tests Conducted:Hydrostatic 5 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exemptlo Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Sinned Eta ,v FL Grass Jr.OA Tech Snecialist s gn Owner's Des-i g-nee, 6Ownerptr'0

. . _t Tilse

.t_

Date _Z /LsA CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have irISpected the components described in this Owner's Report during the period I2E2I°L to Zi 12A ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

g AW~ oVF R.D. Klein Commissions NC853. N-I Inspectors'Si'nature National Board. State, Province and Endorsements Date Z-)7 . Z 005 Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoany Ia. Date March 16. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

I

3. Work Performed By: Duke Power Companv 3a. Work Order #: 98607889 Address: 526 S.Church Street. Charlotte NC 28201-1006 Repair Orgailzatioi Job #

Type Code Symbol Stamp: NLA Authorization No. N/A Expiration Date: MIA 3b. NSM or MM #- N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B.

5. (a) Applicable Construction Code: ASME li 19Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

- Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected. Removed, or ASMECodeStamped

_ _ _ _ _ _Instafled

_ _ __ _ (yes or no)

A 0l Corrected, 0 No 1-MCA-SM-H34 Duke Power N/A N/A N/A N/A 0 Removed,

. 0Installed 03Yes B 03Corrected, 0 No 0.Removed;

._ 0.Installed 0Yes C 0 Corrected, 0 No

.O Removed,

. 0Installed 0Yes D 0 Corrected, 0 No 03Removed,

. . . .0 Installed 0Yes E .0 Corrected, 0 No 03Removed,

.3 0Installed 0 Yes O Corrected, 0 No 0 Removed,

. . 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Worl I Replaced Load Pin (Pivot Pin)

8. Tests Conducted:Hydrostatic a Pneumatic O Nom. Operating Press. 0 Other 0 ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -A,1-ig2 FL Grass Jr.OA Tech Specialist Owner of Owner's Designee. Title Date -4L co CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by 4MSBCT have inspected the components described in this Owners Report during the period age 21*;

to~d7< and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853. N-1 lnspec ~s'ipnature National Board. State. Province and Endorsements Date g7/? .2cvY Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Companv Ia. Date March 17. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road., Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98607892 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Otanlratlon Job Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: SA 3b. NSM or MM#: N/A

4. (a) Identification of System: SM- Main Steam 4. (b) Class of System: B I

5. (a) Appilcable Construction Code: ASME lIl 19n.Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg -  ; Mfg Serial No. National Board No., Other Identification Year Built Corrected, Removed, or ASME Code Stamped

___________ ___________installed -N co o A .0 Corrected, 0 No 1-MCA-SM-115 Duke Power - 21547 N/A N/A N/A 0 Removed,

0. Installed 0 Yes B 0: Corrected,: 0 No 0 Removed, 0 Installed 0 Yes C 0 Corrected, 0 No

0. Removed, 03 Installed 0 Yes D 0 Corrected, 0 No 0 Removed,

- . . . 0 Installed 0Yes E O3 Corrected, 0 No 03 Removed,-

._ ._ .0 Installed 0.Yes F 0 Corrected, 0 No 0 Removed,

.3 . . 0Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced pivot pin

8. Tests Conducted:Hydrostatic Cl Pneumatic O Nom. Operating Press. 0 Other 0 ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure -psig Test Temp. .. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.OA Tech Specialist Date V/7/ -4 Owner r Owner's Designee, Tite CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3-7:0 to 3-49  ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853. N-I Inspector's SignFure National Board. State, Province and Endorsements Dateo3 q .A00 Page 2 of 2

FORM NIS-2 OWNER'S REPuRT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoany la. Date March 21. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power ComDanv 3a. Work Order #: 98610296 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job i Type Code Symbol Stamp: L Authorization No. NIA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: FW - Refuelino Water 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME ll 19Z1 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

_ Installed (yes or no)

A 0. Corrected, E0 No 1-MCA-FW-H136 Duke Power 15918. NA N/A N/A El Removed, i_3 . - '._ 0Installed 0Yes B 0 Corrected, 0 No 1-MCA-FW-H136 Duke Power 17412 N/A N/A N/A 0 Removed, C

. E El Installed 0Yes 03 Corrected, 0 No 0-Removed, D

.3

.0

. ._ 0Installed 0Yes Corrected, 0 No 0 Removed, E

0 Installed . 0Yes 0 Corrected, 0 No 03 Removed,

. 0 Installed. 0 Yes F 03 Corrected, 0 No 03 Removed,

. 0Installed 0Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of thir form.

7. Description of Work Replaced Snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic El Nom. Operating Press. E Other E ExemptlO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. .. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed gita- FL Grass Jr QA Tech Specialist Date / /

Owner g er's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 6-y to3-zOg .; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853, N-I Inspectorls'Sibnature National Board, State, Province and Endorsements Date 3L2P0 y Page 2 of 2

FORM NIS-2 OWNER'S REI .. rOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv 1a. Date March 26. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of I

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companyv 3a. WorkOrder#: 98628183 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repalr Ornmtlon Job

• Type Code Symbol Stamp: W Authorization No. S/ Expiration Date: n 3b. NSM or MM #;. NSM-12556

4. (a) Identification of System: SA - Main Steam Supvly to Auxiliary Eguloment 4. (b) Class of System: X

5. (a) Applicable Construction Codo: ASMEi11 1971 Edition, Summer and Winter Addenda, NIA Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components: .

l Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg NMg Serial No. National Board No. Other Identfflcation Year Built Coreted, Removed, or ASME Code Stamped Installed (yes or no)

A 0 Corrected, 0 No 1-MCA-SA-H017 Duke Power - N/A, N/A N/A N/A 0 Removed,-

0.Installed 0 Yes B . 0 Corrected, 0 No 1-MCA-SA-H096 Duke Power N/A N/A N/A N/A 0 Removed,

.  ; . . .3. .  ; O Installed 0Yes C 0 Corrected, 03No 0 Removed, 0 Installed 0 Yes D 03Corrected, 0 No 0.Removed,

. .. . . .  : , . . 0 Installed 0 Yes E 0 Corrected, 0 No 03Removed, F

.3 , 0 Installed 0 Yes 03Corrected, 0 No 03Removed,

.3 . . . . Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Modified 1-MCA-SA-H01 7 and deleted 1 MCA-SA-H096

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptEI Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -FL Grass JrQA Tech Specialist Date 0wher op{)wner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvtvana and employed by HSB CT av inspecte theyomponents described in this Owner's Report during the period

.3JS2Vtto 326 O ; and state that to the best of my knowledge and belief, the Owner ha's performed ekamifations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this v nspection. /

--- erome F Swan Commissions PA2759. N-1 Inspector sswtuye National Board, State, Province and Endorsements 6 Date 5 a Page 2 of 2

FORM NIS-2 OWNER'S REF .. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comranv Ia. Date Adril 4. 2004 526 S. Church Street. Charlotte. NC 28201-1006

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv -I 3a. Work Order #: 98628183 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organizatlon Job I Type Code Symbol Stamp: N/A Authorization No. t!/A Expiration Date: N! 3b. NSM or MM #: NSM-12556

4. (a) Identification of System: SA - Main Steam SugglV to Aux Eauipment 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

. . ._. Installed (yes or no)

A El Corrected, 0 No SA System Duke Power N/A 4 N/A 1979 0 Removed,

. 0 Installed El Yes B 0 Corrected, 0 No

O Removed, O3 Installed 0Yes C 0 Corrected, 0 No O Removed,

.3 0Installed 0 Yes D 0 Corrected, 0 No 0.Removed, l 0 Installed 03Yes E 0 Corrected, 0 No o Removed,

. 0Installed 0 Yes F 0 Corrected, 0 No o Removed,

. 0 Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Cut out & replaced welds SA1 FW3-2 and SA1 FW3-3 at valve 1SA49

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure 1080 psig Test Temp. 510 0 F Pressure s Sig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks Test performed per procedure MP/0/A/7650/076 on this work order (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed *h*2 FL Grass J rOA Tech Specialist Date V,4-O&/

Owner 6r Owner's Designee. Wie CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvyvana and employed by HSB gjhavgr inspected Pe components described in this Owner's Report during the period W//2/I22O to ;0tgf/j and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for' any personal injury or property damage or a loss of any kind arising from or connected with this f/ nseciome Inspectors re F Swan Commissions PA2759. N-I National Board, State, Province and Endorsements 6 Date 9LY-Page 2 of 2

FORM NIS-2 OWNER'S RES a, (:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv la. Date March 29. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet _1_ of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 033 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98629069 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Orgaisntion Job I Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # _ MGMM-14533

4. (a) Identification of System: ND - Residual Heat Removal 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME II 1921 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repalr/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component - Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected. Removed, or ASME Code Stamped

. -. Installed (yes or no)

A 0. Corrected, Ed No 1-MCA-ND-H64 Duke Power . N/A N/A N/A N/A 0 Removed, B

_ . . . . Installed

0. Corrected, 0

0 No Yes 03 Removed,

_3 . 0 Installed a Yes C .0 Corrected, 0 No 03 Removed, O0Installed 0 Yes D 0 Corrected, 0 No 03 Removed, E

.3. . 0 Installed 0 Yes 0 Corrected,: 0 No 03 Removed, F

_ 0 Installed 0 Yes 0 Corrected, 0 No 0 Removed,

. . 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Hanaer modified oer MGMM-14533 (reDlaced strut with a rod)

8. Tests Conducted:Hydrostatic El Pneumatic E Nom. Operating Press. E Other E ExemptO Pressure P- Sig Test Temp. OF Pressure psig Test Temp. OF Pressure Sig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 7 FL Grass Jr QA Tech Specialist Date Owner cpwner's Designee, ritle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsv vana and employed by HSB CVfiavp inspectedjthe omponents described in this Owner's Report during the period 3l29 to 3//!L.0.; and state that to the best of my knowledge and belief, the Owner has pe formed ek&mirratiohs and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this Jinspection.

ome F Swan Commissions PA2759, N-I inspectors ignure National Board, State, Province and Endorsements I Datee!zS @

Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Comoanv la. Date February 26. 2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )_I

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98634911 Address: 526 S. Church Street. Charlotte NC 28201-1006 epiJr Organ8afOn JOb X

Type Code Symbol Stamp: N/A Authorization No. NIA Expiration Date: N/ 3b. NSM or MM #: N/A

4. (a) Identification of System: RN - Nuclear Service Water & NS - Containment Sprav 4. (b) Class of System: B / C

5. (a) Applicable Construction Code: ASME 1I 19Z1 Edition, Summer and Wnter Addenda, N/A Code Cases (b) Applicable Edition of Section Xi Utilized for Repair/ Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. - National Board No. Other Idenfifcation Year Built Corrected. Removed, or ASME Code Stamped Iinstalled (yes or no)

A 03 Corrected, 0 No RN Piping System Duke Power N/A 36 N/A 1981 0 Removed,

.. 0 Installed. 1 Yes B .0 Corrected, 0 No NS Piping System Duke Power N/A 40 N/A 1981 0 Removed,

.E_ _ ._ ._.____ Installed 0 Yes C 0 Corrected, 0 No 03 Removed,

. .. . O Installed 0 Yes D 0 Corrected, 3 No

0. Removed,

.3 . . . . . Installed 0Yes 03 Corrected, 0 No 0 Removed,

. . .0 Installed 0Yes F 0 Corrected, 0 No 0 Removed,

. . . .. . _ O Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting on flanges at valves 1RN-VA-1017, 1018, 1019. &

1020 as well as the viewin port .

8. Tests Conducted:Hydrostatic Cl Pneumatic 0 Nom. Operating Press. 0 Other 0 Exempte Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPUANCE I certify that the statements made in the report are correct and this confornis to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Rinnpd FL Graqs .r-OA Tech nPrcialist Date 3//Z4at-(

o(Owees Dosignee.Ttl CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by.

HSB CT have inspected the components described in this Owner's Report during the period I;7iQ5L. to IzR-tL..; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853. N-I inspbct-orl~nature National Board, State, Province and Endorsements Date 3 A My Page 2 of 2

FORM NIS-2 OWNER'S REF . FOR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date March 24. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Fern, Road. Huntersvine, NC 28078 2a. Unit: 01 02 013 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. Work Order #: 98654052 Address: 526 S. Church Street. Charlotte NC 28201-1006 RspairO Tg on Job e Type Code Symbol Stamp: WA Authorizatlon No. WA Expiration Date: N/A 3b. NSM or MM #. N/A

4. (a) Identification of System: NI - Safety Inlection 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME il 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6, Column 7 Column 8 Name ot component Name of Mfg - Mfg Serial No. National Board No. Other Identifrcation Year Built Corrected, Removed, or ASME Code Stamped

.- nstalled(yes or no)

A . . . . Corrected, 0 No 1-NI-VA-82 Atwood Morrell 2-15436-01 364 . N/A 1986 0 Removed,

. __3 -  : . - :0 Installed - E Yes B 0 Corrected, 0 No 03 Removed,

.3 . .  : .0 Installed 0Yes C 0. Corrected, 0 No 03 Removed, 03 Installed 0 Yes D 03 Corrected, 0 No

0. Removed, 03 Installed 0Yes E 0 Corrected, 0 No 03 Removed,

. 03 Installed 0 Yes F 0 Corrected, 0 No 0 Removed,

. .3_ 0Installed . 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of WWs nr&

9%

Pinnli+/-nri nicfk

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 Exempto Pressure psig Test Temp. OF Pressure psig Test Temp. __ OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed J&A a FL Grass Jr.OA Tech Specialist Date ,L0LYgO/L Owner o00wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSI

§Ch ase inspectedthe ca mpnents described in this Owner's Report during the period o

6Y to 3/Z Y foand state that to the best of my knowledge and belief, the Owner hs pbrfoimed exAminations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore neither the Inspector nor his employer shall be liable in any manner for any personal injur property damage or a loss of any kind arising from or connected with this 1 inspection. Co

(

7-secorlga"Pye Llez /XromeFSwan- Commissions-PA2759, N-1 National Board, State, Province and Endorsements Page2of2

FORM NIS-2 OWNER'S REF .

m EOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv 1a. Date March 24. 2004 526 S. Church Street. Charlotte. NC 28201-1 006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units - _)

3. Work Performed By: Duke Power Combanv 3a. Work Order #: 98654053 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair OfganIzatiom JobX Type Code Symbol Stamp: NL Authorization No. i1!A Expiration Date: N!LA 3b. NSM or MM #- MGMM-14837

4. (a) Identification of System: NI - Safety Iniectlon 4. (b) Class of System: A

5. (a) Applicable Construction Code: ASME ll 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mg fg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

.__ __ __ __ __ __ _ _ .__ Installed - (yes or no}

A - 0 Corrected,, 0 No 1-NI-VA-94 Atwood Morrell 3-15436-01 365 N/A 1986 a Removed,

. _ O Installed S Yes B 03 Corrected, 0 No 03 Removed, l3 0 Installed 0 Yes C 03 Corrected, 0 No o Removed, 0 Installed 0 Yes D 0 Corrected, 0 No

0. Removed, 03 Installed 0Yes E .0 Corrected, 0 No 0 Removed, F

0 3 Installed 0Yes 0 Corrected, 0 No 0 Removed,

. 03 Installed 0Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced Disc and Bonnett

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. El Other 0 ExemptO Pressure psig Test Temp. OF Pressure Psig Test Temp. OF Pressure . . psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \ Z FL Grass Jr.OA Tech Specialist Date I Owner & Owners Designee, Title S

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CfTiav9 inspected )he 9omponents described in this Owner's Report during the period 3 lC7/lo to -3/ 2...; and state that to the best of my knowledge and belief, the Owner has peWormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o property damage or a loss of any kind arising from or connected with this nsPection.

erome F Swan Commissions PA2759. N-I Inspectore e National Board, State, Province and Endorsements C Date Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: P Duke Power Comoanv Ia. Date March 16. 2004 526 S. Church Street. CIharlotte. NC 28201-1006 Sheet 1 of 1 I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersviile. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv - 3a. WorkOrder#: 98655015 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair organizalion JobU Type Code Symbol Stamp: N/A Authorization No. NIA Expiration Date: NSA 3b. NSM or MM #*. NMA

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME IiI 19Z7_ Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair! Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg SerIal No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes Or no)

AO Corrected, El No 1-MCA-SM-H064 Duke Power 15860 N/A N/A N/A 0 Removed, B

_ . O Installed 03Yes 0 Corrected, 0 No 1-MCA-SM-H064 Duke Power 22342 N/A N/A N/A 03 Removed,

. . . El Installed 0Yes C 0 Corrected, 0 No 03 Removed,

. . - O3.Installed 0Yes D 0 Corrected, 0 No

03 Removed, 0 Installed 0 Yes

. .E Corrected, 0 No 03 Removed, O0Installed 0Yes F 0 Corrected, 0 No 0 Removed,

. . . .0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists,. sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of thik form.

7. Description of W ork Renlaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.QA Tech Specialist Date ,

Owner VOwner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected] e components described in this Owner's Report during the period 3*H?...¶_ to 3--(7 X ; and state that to the best of my knowledge and belief, the Owner has performed examinati ns and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owrier's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

R.D. Klein Commissions NC853, N-I lnspecto signature National Board. State, Province and Endorsements I

Date ;QV7 *i j Page 2 of 2

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv 1a. Date March 16. 2004 526 S. Church Street. Charlotte. NC 28201.1006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station 12700 Haoers Ferrv Road. Huntesville. NC 28078 2a. Unit: 01 02 C3 OShared (specify Units )

3. Work Performed By: Duke Power Comoanv 3a. Work Order#: 98655016 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Ovrgdnzeliort Job

• Type Code Symbol Stamp: NAL Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SM- Main Steam 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASMEIlil 191.EdItion, Summer and WInter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1995, 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Cot 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

._-_._._ ._._._ _ . Installed (yes or no)

A 03 Corrected,- el No 1-MCA-SM-H136 Duke Power .15858 - N/A  : N/A N/A El Romoved, B

. 0 Installed 03 Yes 03 Corrected, E No 1-MCA-SM-H136 Duke Power 19916 N/A N/A N/A 0 Removed, C

._ ._ ._._...E Installed 0 Yes 0 Corrected, 0 No

0. Removed,

. 0 3 Installed 0 Yes D 03 Corrected, 0 No 03 Removed,

_ . . 0 Installed 0 Yes 0 Corrected, 0 No

0. Removed,

. 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed, 0 Installed 0Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in.x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of W ork Renlaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptEl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 4A /0 FL Grass Jr QA Tech Specialist Date v /1elc Owner o(Owners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by.

HSB CT have inspected the components described in this Owner's Report during the period

?-t3.OI? to 3-Adg.L ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

.R. D. Klein Commissions N-l NC853 ,

inspecIor's'iqiature National Board, State, Province and Endorsements Date 1+/- .Gas 0 yI Page 2 of 2

FORM NIS-2 OWNER'S REI ,, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power ComDanv Sha.

Date March 28o2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units )__

3. Work Performed By: Duke Power Comoanv 3a. Work Order #: 98655587 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Orpzatlon Job C Type Code Symbol Stamp: N Authorization No. MI Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: Ni - Safetv Iniection 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASMEill 192. Edition Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1995.1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4. Column 5 Col 6 Column 7 Column 8 Name of Component - Name of MtKg - mQ Serial No. National Board No. Other Identification Year Built Corrected, Removed,or ASME Code Stamped Ineslted (yes or no)

A 0 Corrected, 0 No 1-NI-VA-10 Walworth C54506 7 N/A 1973 0 Removed, B

. . . - 0Installed E Yes 0 Corrected, 0 No O3 Removed,

. 0 3 Installed 0 Yes C 0 Corrected, 0 No 0 Removed,

. . 0Installed 0Yes D 0 Corrected, 0 No

0. Removed,

_ . 0 Installed 0Yes E 0 Corrected, 0 No 0.Removed,,

_ . . . .O0 Installed 0Yes F 03 Corrected, 0 No 03 Removed,.

_ - . . 0 Installed 03Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced disc

8. Tests Conducted:Hydrostatic a Pneumatic 0 Nom. Operating Press. El Other 0 Exempto Pressure psig Test Temp. OF Pressure psig Test Temp. i OF Pressure Psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Sianed N tti FL Grass Jr.OA Tech Soecialist Date 4 Owner oeOwneres Designee, rte CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT have/ins ec the c ponents described in this Owner's Report during the period 17 Q to 32iZ k and state that to the best of my knowledge and belief, the Owner ha6peored eiaminigtions and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this ginspectiion,, D (I rnspector ur Jerome FSwan Commissions PA2759.N-I National Board, State, Province and Endorsements Date3/7 r /

L/

Page 2 of 2

FORM NIS-2 OWNER'S REI .. r.OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv la. Date April 5. 2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1J_ of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrv Road. Huntersville. NC 28078 2a. Unit:* 01 02 03 OShared (specify Units )

3. Work Performed By: Duke Power ComDany 3a. Work Order #: 98656076 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Orga aIlon Job #

Type Code Symbol Stamp: N/A Authorization No. M/A Expiration Date: N/A 3b. NSM or MM #: MGMM14855

4. (a) Identification of System: NF-- Ice Condencer Refrigeration 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME li1i1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 -Column 7 Column 8 Name of Component Name of Mfg - Mtg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

_ __ __ _Installed

_ _ _ _ (yes or no)

A - Corrected, 0 No NF System Duke Power N/A 5 N/A 1979 0 Removed,

. 0 Installed E Yes B 0 Corrected, 0 No 0 Removed, 0 Installed 03 Yes C

• 0 Corrected, 0 No

.o Removed,

-3 0Installed 0Yes D -0 Corrected, 0 No

0 Removed, 0Installed 03 Yes E 0 Corrected, 0 No

. 0 Removed,

0 Installed 0 Yes F Corrected, 0 No 0 Removed, E0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material in the flange at Penetration M371 (Annulus Side)

8. Tests Conducted:Hydrostatic 0 Pneumatic E Nom. Operating Press. El Other 0 Exemptf Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure pSig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed-Ja4 wa FL Grass Jr.QA Tech Specialist Date ___

Owner owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed byHSB CT have t hnspected components described in this Owner's Report during the period

-3 Il D to and state that to the best of my knowledge and belief, the Owner has perfbrmed examinatibons and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.:

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for ny personal injury or property damage or a loss of any kind arising from or connected with this spection.

-1j,) r o mrome F Swan Commissions PA2759, N-I nspectoespSigre National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REF . .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv Ia. Date Airil 1. 2004 526 S.Church Street. Charlotte. NC 28201-1006 Sheet 1L_ of I

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville, NC 28078 2a. Unit: E1l 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Companv 3a. WorkOrder# : 981656473 Address: 526 S. Church Street. Charlotte NC 28201-1006 RepairOi Ahizatlon JobU Type Code Synrbol Stamp: 1LA Authorization No. N/ EIplration Date: N/A - 3b. NSM or MM #:_N_ _

4. (a) Identification of System: RN- Nuclear Service Water 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME III 1921 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repalr / Replacement ActIvity: 1995.1996 Addenda (1992 through 1992 Addenda for Classt AC and CC and their supports)

6. identification of Components:

Column 1 Column 2 Column 3 Column 4 .: l Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg  ; . Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

__ __ _ __ __ -Instatled (yes or no)

A 0 Corrected 0 No RN System Duke Power N/A 36 N/A 1981 0 Removed,,

. 0 Installed E Yes B 0 Corrected, 0 No 0 Removed, 0 Installed ' 0 Yes C 0 Corrected, 0 No 0 Removed,

-  : 0 Installed 0 Yes D 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes E 0 Corrected, 0 No 0 Removed, 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed,

. O Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Performed weld build-un in the toe of weld RN1 F32B

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 1 Other 0 ExemptO Pressure jpsig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturee's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE, I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of Authorization No. NIA Expiration Date N/A Signed S0 1-Aa FL Grass Jr.OA Tech Specialist Date A-!/4 t/_

Owner prOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CT have i spected the omponents described in this Owners Report during the period

]3 t2 to i/lRAW: and state that to the best of my knowledge and belief, the Owner has'perfdrmed exami ations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju r property damage or a loss of any kind arising from or connected with this

-me F Swan Commissions PA2759. N-I t i reNational Board, State. Province and Endorsements

(

Page2of 2

FORM NIS-2 OWNER'S REl' .. r OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv Ila. Date Aoril 14.2004 526 S. Church Street. Charlotte. NC 28201-1006 Sheet I of 1

2. Plant Address: McGuire Nuclear Station 12700 Hacers Ferry Road. Huntersville, NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Company 3a. Work Order #:. 98659196 Address: - 526 S.Church Street. Charlotte NC 28201-1006 Repair Orinzatlon Job C Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SM- Main Steam 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASME lIl 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1995. 1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

= Column 1 Column 2 Column 3 Column 4 Column 5 Col 6. Column 7 Column 8 Name of Component Name of Mfg

• Mfg Sertal No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no)

A 0 Corrected, 0 No 1-SM-VA-7 Atwood / Morrill 4-623 N/A . N/A 1975 0 Removed, 0 Installed E Yes B 0 Corrected, 0 No-0 Removed, 03 Installed 0 Yes C 03 Corrected, 0 No-0 Removed,

. I__0Installed 0Yes D 0 Corrected, 0 No 0 Removed,

.E.l. . . O Installed 0Yes E 0 Corrected, 0 No 03 Removed, 0.Installed 0 Yes F 03 Corrected, 0 No 0 Removed, 0 Installed 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced stud

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. E Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed i& Owner-(2 FL Grass Jr.OA Tech Specialist o(Owner's Designee, Title Date Sz/a/i.

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSI CT h e inspected he omponents described in this Owner's Report during the period Rbto i LtL 2// ; and state that to the best of my knowledge and belief, the Owner has pedormed examinfations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.D

'Tr" of 1{C ome F Swan Commissions PA2759, N-I Inspectoe r National Board, State, Province and Endorsements Date ileD_

Page 2 of 2

FORM NIS-2 OWNER'S REI ,. .FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv la. Date Anril 5. 2004 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of I

2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road. Huntersville. NC 28078 2a. Unit: El1 02 03 OShared (specify Units )

3. Work Performed By: Duke Power Compan 3a. Work Order #: 98659200 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Oftentlion Job #

Type Code Symbol Stamp: N/A Authorization No. NSA Expiration Date: N/A 3b. NSM or MM #:_ N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B

5. (a) Applicable Construction Code: ASMEIII 1971t Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repalr/ Replacement Activity: 1995,1996 Addenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mf9g Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped

.___ .__ -_ *_._-._. _: _. ._._-Installed (yes or no)

A 0 Corrected, 0 No 1-NV-HG-1005 Duke Power - 20533 N/A N/A N/A 0 Removed,'

. i.-. O Installed a Yes B 0 Corrected, 01 No 1-NV-HG-1005 Duke Power 14783 N/A N/A N/A 0 Removed, C

. . . 0 Installed 0 Corrected, 03 0 No Yes 03 Removed,

. . . . . 0 Installed 0 Yes D lOCorrected, O No 0 Removed, E

0l Installed 0 Corrected, 0 Yes 0 No 0 Removed,

. 0 Installed 0 Yes F 0 Corrected, 0 No 0 Removed,

. . . . O Installed 0 Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber

8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other 0 ExemptZl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed  ; bOwner fVeoe'Owner'sFL Designee, Grass JrOA Tech Specialist Title Date 4/w/ovZ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsvlvana and employed by HSB CThave spected th ctnppnents described in this Owner's Report during the period

. /4/A2SLto X/L5/ and state that to the best of my knowledge and belief, the Owner hasdperformed exahinitiorls and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore neither the Inspector nor his employer shall be liable in any manner for any personal injury property damage or a loss of any kind arising from or connected with this rome F Swan Commissions PA2759, N-I Inspeto r National Board. State, Province and Endorsements Page 2 of 2

6.0 Pressure Testin4 Table 6-1 shows the number of Class 1 (Category B-P), Class 2 (Category C-H),

and Risk Informed Segment (Category R-A) pressure tests completed for refueling outage EOC-16.

Table 6-1 Outage Specific Sum ary Examination Category Test Requirement Total Completed EOC16 B-P System Leakage Test (IWB-5221) 1 C-H System Leakage Test (IWC-5221) 7 R-A Risk Informed VT-2 for Socket Welds 67 Segments Table 6-2 shows a completion status of pressure tests conducted during the first period of the third ten-year interval.

Table 6-2 Per od Specific Summary Total Total (O)

Examination Test Requirement Examinations Examinations Examinations Category Required For Credited For Complete For This Period This Period This Period B-P System Leakage Test 2 2 100%

(IWB-5221)

C-H System Leakage Test 31 7 22.58%

(IWC-5221)

__________¢P__ ,; p .. , .'-t4,

[,, ' ,

R-A System Leakage Test (67 Segments 134 100%

Each Refueling Outage) 134 For Period .

Section 6 Prepared By: Date:

Secin 6 ReviPwqd By: Date:

C _ ((1kt. V- { 1)/

Outage 2/EOC 16 Page 1 of 7 McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14, 2004

The Class 1 (Category B-P) pressure test zone is required each refueling outage.

Table 6-3 shows a completion status of the Class 1 (Category B-P) pressure test zone conducted during refueling cycle EOC16.

_Table 6-3 Detailed Class Listing EOC16 Zone Completion Number Boundary Dwg Status EOC16 VT-2 Examination Date 1NC-070L-A MC-ISIL-1553-01.00 Complete 04-Apr-04 MC-ISIL-1 553-02.00 Complete 04-Apr-04 MC-ISIL-1553-02.01 Complete 04-Apr-04 MC-ISIL-1554-01.00 Complete 04-Apr-04 MC-ISIL-1554-01.01 Complete 04-Apr-04 MC-ISIL-1554-01.02 Complete 04-Apr-04 MC-ISIL-1561-01.00 Complete 04-Apr-04 MC-ISIL-1562-01.00 Complete 04-Apr-04 MC-ISIL-1562-02.00 Complete 04-Apr-04 MC-ISIL-1562-02.01 Complete 04-Apr-04 MC-ISIL-1562-03.00 Complete 04-Apr-04 MC-ISIL-1562-03.01 Complete 04-Apr-04 Class 2 (Category C-H) pressure test zones are required once each inspection period.

Table 6-4 shows a completion status of Class 2 (Category C-H) pressure tests required for the first period of the third ten-year interval.

Table 6-4 Detailed Class 2 Period Listing ______

VT-2 Examination Zone Number Boundary Dwg Completion Status Date 1 1BB-096L-B MC-ISIL-1580-01.00 Partial 04-Apr-04 2 1BB-098L-B MC-ISIL-1572-03.00 Not Yet Tested N/A MC-ISIL-1580-01.00 Not Yet Tested N/A MC-ISIL-1584-01.00 Not Yet Tested N/A 3 1CA-006L-B MC-ISIL-1592-01.00 Completed in EOC1 6 04-Apr-04 4 1CA-032L-B MC-ISIL-1584-01.00 Not Yet Tested N/A MC-ISIL-1591-01.01 Not Yet Tested N/A MC-ISIL-1592-01.00 Not Yet Tested N/A MC-ISIL-1617-01.00 Not Yet Tested N/A Outage 2/EOC 16 Page 2 of 7 -

McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14, 2004

VT-2 Examination Zone Boundary Dwg Completion Status Date 5 1FW-027L-B MC-ISIL-1 554-03.00 Not Yet Tested N/A MC-ISIL-1554-03.01 Not Yet Tested N/A MC-ISIL-1561-01.00 Not Yet Tested N/A MC-ISIL-1562-03.00 Not Yet Tested N/A MC-ISIL-1563-01.00 Not Yet Tested N/A

_ MC-ISIL-1571-01.00 Not Yet Tested N/A 6 1KC-003L-B MC-ISIL-1 573-03.01 Partial 03-Oct-02 7 1ND-019L-B MC-ISIL-1554-01.02 Not Yet Tested N/A MC-ISIL-1561-01.00 Partial 08-Mar-04 MC-ISIL-1562-03.00 Partial 08-Mar-04 MC-ISIL-1 562-03.01 Partial 17-Sep-02 MC-ISIL-1563-01.00 Not Yet Tested N/A MC-ISIL-1571-01.00 Not Yet Tested N/A MC-ISIL-1 572-01.00 Not Yet Tested N/A 8 1ND-050L-B MC-ISIL-1561-01.00 Not Yet Tested N/A MC-ISIL-1 562-03.01 Not Yet Tested N/A MC-ISIL-1563-01.00 Not Yet Tested N/A 9 1NI-021L-B MC-ISIL-1562-02.00 Completed in EOC16 31-Mar-04 MC-ISIL-1562-02.01 Completed in EOC1 6 31 -Mar-04 MC-ISIL-1572-01.01 Completed in EOC16 31-Mar-04 10 1NI-022L-B MC-ISIL-1562-03.00 Not Yet Tested N/A MC-ISIL-1562-03.01 Not Yet Tested N/A 11 1NI-039L-B MC-ISIL-1 562-03.01 Partial 19-Sep-02 12 1NI-053L-B MC-ISIL-1562-03.00 Not Yet Tested N/A 13 1NI-060L-B MC-ISIL-1 562-02.01 Partial 30-Sep-02 MC-ISIL-1562-03.00 Not Yet Tested N/A 14 1Nl-071 L-B MC-ISIL-1562-01.00 Completed in EOC16 29-Apr-04 15 1NI-074L-B MC-ISIL-1562-03.00 Not Yet Tested N/A 16 1NM-046L-B MC-ISIL-1572-01.01 Completed in EOC16 31 -Mar-04 17 1NS-023L-B MC-ISIL-1563-01.00 Not Yet Tested N/A Outage 2/EOC 16 Page 3 of 7 -

McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14, 2004

VT-2 Examination Zone Boundary Dwg Completion Status Date 18 1NS-024L-B MC-ISIL-1563-01.00 Not Yet Tested N/A 19 1NV-01 6L-B MC-ISIL-1554-01.00 Partial 05-Apr-04 MC-ISIL-1554-01.01 Partial 05-Apr-04 MC-ISIL-1554-01.02 Not Yet Tested N/A MC-ISIL-1554-02.00 Not Yet Tested N/A MC-ISIL-1 554-02.01 Not Yet Tested N/A MC-ISIL-1 554-03.00 Partial 05-Apr-04 MC-ISIL-1554-03.01 Partial 05-Apr-04 MC-ISIL-1554-05.00 Not Yet Tested N/A MC-ISIL-1 561 -01.00 Not Yet Tested N/A MC-ISIL-1562-01.00 Partial 05-Apr-04 MC-ISIL-1562-03.00 Partial 05-Apr-04 20 1NV-017L-B MC-ISIL-1554-01.00 Completed in EOC16 04-Apr-04 MC-ISIL-1554-01.01 Completed in EOC16 04-Apr-04 MC-ISIL-1554-01.02 Completed in EOC15 14-Sep-02 MC-ISIL-1554-01.03 Completed in EOC16 04-Apr-04 21 1NV-018L-B MC-ISIL-1554-01.02 Completed in EOC16 04-Apr-04 22 1NV-020L-B MC-ISIL-1554-01.02 Completed in EOC1 6 02-Apr-04 23 1NV-045L-B MC-ISIL-1554-03.00 Partial 05-Apr-04 24 1NV-051 L-B MC-ISIL-1554-03.01 Partial 05-Apr-04 25 1RN-004L-B MC-ISIL-1574-04.00 Partial 04-Oct-02 26 1RV-002L-B MC-ISIL-1604-03.00 Partial 17-Sep-02 27 1SA-035L-B MC-ISIL-1 593-01.02 Not Yet Tested N/A 28 1SM-006L-B MC-ISIL-1572-03.00 Partial 04-Apr-04 MC-ISIL-1591-01.01 Partial 04-Apr-04 MC-ISIL-1593-01.00 Partial 04-Apr-04 MC-ISIL-1593-01.03 Partial 04-Apr-04 29 1SM-036L-B MC-ISIL-1593-01.00 Not Yet Tested N/A MC-ISIL-1593-01.02 Not Yet Tested N/A MC-ISIL-1593-01.03 Not Yet Tested N/A Outage 2/EOC 16 Page 4 of 7 McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14, 2004

VT-2 Examination Zone Boundary Dwg Completion Status Date 30 1SM-037L-B MC-ISIL-1593-01.00 Not Yet Tested N/A

_ MC-ISIL-1593-01.03 Not Yet Tested N/A 31 1YA-043L-B MC-ISIL-1617-01.00 Not Yet Tested N/A Risk Informed Segments (Category R-A) that receive a pressure test are required each refueling outage. Table 6-5 shows a completion status of the Risk Informed Segment pressure test zones conducted during refueling cycle EOC16.

Table 6-5 Detailed Risk Informed Pressure Test Listing EOC16 Zone Segment Completion EOC16 VT-2 Number Boundary Dwg Number Status Examination Date 1 1NC-070L-A MC-ISIL-1553-01.00 NC-18 Complete 04/04/04 2 NC-19 Complete 04/04/04 3 NC-20 Complete 04/04/04 4 NC-21 Complete 04/04/04 5 NC-23 Complete 04104/04 6 INC-86 Complete 04/04/04 7 NC-89 Complete 04/04/04 8 NC-90 Complete 04/04/04 9 MC-ISIL-1553-02.00 NC-054 Complete 04/04/04 10 NC-055 Complete 04/04104 11 NC-056 Complete 04/04/04 12 MC-ISIL-1 554-01.00 NV-033A Complete 04/04/04 13 NV-033B Complete 04/04/04 14 NV-034A Complete 04/04104 15 NV-034B Complete 04104104 16 NV-037 Complete 04/04/04 17 NV-038 Complete 04104/04 18 NV-041A Complete 04/04/04 19 NV-041 B Complete 04/04/04 20 NV-042A Complete 04/04/04 21 NV-042B Complete 04/04/04 I Part of this segment is also shown on drawing MC-ISIL-1553-02.01 Outage 2/EOC 16 Page 5 of 7 McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14, 2004

EOC16 Zone Segment Completion EOC16 VT-2 Number Boundary Dwg Number Status Examination Date 22 1NC-070L-A MC-ISIL-1554-01.01 NV-030A Complete 04104104 23 NV-030B Complete 04/04/04 24 NV-032A Complete 04/04/04 25 NV-032B Complete 04/04/04 26 NV-035 Complete 04/04/04 27 NV-036 Complete 04/04/04 28 NV-039A Complete 04/04104 29 NV-039B Complete 04/04/04 30 NV-040A Complete 04/04/04 31 NV-040B Complete 04/04/04 32 MC-ISIL-1562-01.00 NI-068 Complete 04/04/04 33 NI-069 Complete 04/04/04 34 NI-070 Complete 04/04/04 35 NI-071 Complete 04/04/04 36 1NV-016L-B MC-ISIL-1554-01.00 NV-020H Comolete 04/04/04 37 NV-020F Complete 04/04/04 38 NV-020GA ComDIete 04/04/04 39 MC-ISIL-1554-01.01 NV-020AD Complete 04/04/04 40 NV-020B Complete 04/04104 41 NV-020CA Complete 04/04/04 42 NV-020D Complete 04/04/04 43 NV-020EA Complete 04/04/04 3 NV-01 9AA Complete 04104/04 44 MC-ISIL-1554-03.00 45 NV-01 9B Complete 04/04/04 46 NV-019D Complete 04/04/04 47 NV-020AB Complete 04/04/04 48 NV-020AC Complete 04/04/04 59 NV-021 A Complete 04/04/04 50 NV-021 B Complete 04/04/04 2

51 MC-ISIL-1554-03.01 NV-002AB Complete 04/04104 52 NV-002D Complete 04/04/04 53 NV-019C I Complete 04/04/04 54 NV-019E Complete 04/04/04 3 NV-028 Complete 04/04/04 55 1NV-017L-B MC-ISIL-1554-01.00 56 3 NV-029 Complete 04/04/04 57 MC-ISIL-1554-01.01 3 NV-026 Complete 04104/04 3 NV-027 Complete 04/04104 58 59 1NV-01 8L-B MC-ISIL-1554-01.02 NV-080A Complete 04/04/04 60 NV-080B Complete 1 04/04/04 61 I _____________

NV-084A £ Complete 04/04/04 2 Part of this segment is also shown on drawing MC-ISIL-1562-03.00 3 Part of this segment is also shown on drawing MC-ISIL-1554-01.03 Outage 2/EOC 16 Page 6 of 7 McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14,2004

EOC16 Zone Segment Completion EOC16 VT-2 Number Boundary Dwg Number Status Examination Date 62 1NV-018L-B MC-ISIL-1554-01.02 NV-084B Complete 04/04/04 63 NV-084C Complete 04/04/04 64 1 NV-045L-B MC-ISIL-1554-03.00 NV-002C Complete 04/04/04 65 NV-1 08A Complete 04/04/04 66 NV-109 Complete 04/04/04 4 NV-01 1A Complete 04/04/04 67 1 NV-0511-B I MC-ISIL-1554-03.01 4 Part of this segment is also shown on drawings MC-ISIL-1554-03.01 and MC-ISIL-1562-01.00 Outage 2/EOC 16 Page7of7 -

McGuire Unit 1 Revision 0 Section 6 - Third Ten-Year Interval June 14, 2004