Text

Inservice Inspection Report End of Cycle 22 Refueling Outage
	ML13212A067
Person / Time
Site:	McGuire
Issue date:	07/22/2013
From:	Capps S; Duke Energy Carolinas
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	Download: ML13212A067 (228)
	v • d • e

Steven D. Capps

~DUKE Vice President ENERGY. McGuire Nuclear Station Duke Energy MGOVP 1 12700 Hagers Ferry Road Huntersville, NC 28078 o: 980.875.4805 f: 980.875.4809 Steven.Capps@duke-energy.com July 22, 2013 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001

SUBJECT:

Duke Energy Carolinas, LLC McGuire Nuclear Station Unit 1 Docket Number 50-369 Inservice Inspection Report End of Cycle 22 Refueling Outage In accordance with ASME Section Xl, attached is the Inservice Inspection Report for the end of cycle 22 (EOC-22) refueling outage for McGuire Nuclear Station, Unit 1. This is the first outage of the first inspection period of the fourth ten year interval.

There were no limitations (i.e., 90% or less of the required examination coverage obtained) identified for examinations associated with this outage report.

If you have any questions or require additional information, please contact P. T. Vu at (980) 875-4302.

Sincerely, Steven D. Capps Attachment AODlV www.duke-energy.com

U. S. Nuclear Regulatory Commission July 22, 2013 Page 2 xc:

Victor McCree, Region II Administrator U. S. Nuclear Regulatory Commission Marquis One Tower 245 Peachtree Center Ave., NE Suite 1200 Atlanta, GA 30303-1257 Jason Paige, Project Manager U. S. Nuclear Regulatory Commission 11555 Rockville Pike Mail Stop 0-8 G9A Rockville, MD 20852-2738 John Zeiler NRC Senior Resident Inspector McGuire Nuclear Station

ATTACHMENT FORM NIS-1 OWNER'S DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner:Duke Energy Carolinas, 526 S. Church St. Charlotte, NC 28201-1006 (Name and Address of Owner)

2. Plant: McGuire Nuclear Station, 12700 Haqers Ferry Road Huntersville, N.C. 28078-9340 (Name and Address of Plant)

3. Plant Unit: 1 4. Owner Certificate of Authorization (if required) N/A

5. Commercial Service Date: December 1. 1981 6. National Board Number for Unit 44

7. Components Inspected:

Component or Manufacturer or Manufacturer or State or National Appurtenance Installer Installer Serial Province No. Board No.

No.

See Section 1.1 in the Attached Report Note: Supplemental sheets in the form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Total number of pages contained in this report: 225

OWNER'S REPORT FOR INSERVICE INSPECTIONS MCGUIRE UNIT 1 2013 REFUELING OUTAGE EOC 22 (OUTAGE 1)

Location: McGuire Nuclear Station 12700 Hagers Ferry Road Huntersville, North Carolina 28078-9340 NRC Docket No. 50-369 National Board No. 44 Commercial Service Date: December 1, 1981 Owner: Duke Energy Carolinas 526 South Church St.

Charlotte, N. C. 28201-1006 Revision 0 Prepared By: nlaý,(2o UCALvI7// 1"7/013 Date Reviewed By: Date 2'z/Zo/_3 Approved By: Date 7//7I~ /-~3

DISTRIBUTION LIST

1. Duke Energy Carolinas Nuclear Engineering ASME Section Xl Services

2. McGuire Nuclear Station Inspection Services (ISI Coordinator)

3. NRC Document Control Desk

4. HSBCT (AIA) c/o ANII at McGuire

5. State of North Carolina Department of Labor c/o J. M. Givens, Jr.

TABLE OF CONTENTS Section Title Revision 1.0 General Information 0 2.0 Third Ten-Year Interval Inspection Status 0 3.0 Final Inservice Inspection Plan 0 4.0 Results of Inspections Performed 0 5.0 Owner's Report for Repair / Replacement Activities 0 6.0 Pressure Testing 0

FORM NIS-1 (Back)

8. Examination Dates October 15, 2011 to Aprl22,2013

9. Inspection Period Identification: First Period

10. Inspection Interval Identification: Fourth Interval

11. Applicable Edition of Section Xl 1998 Addenda 2000

12. Date/Revision of Inspection Plan: November 30, 2011 / Revision 0

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Sections 2.0, 3.0, and 6.0

14. Abstract of Results of Examinations and Tests. See Section 4.0. and 6.0

15. Abstract of Corrective Measures. See Section 4.3 We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable) N/A Expiration Dat N/A Date 1Zj7 20 /3 Signed Duke Energy Carolinas By Owner CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Province of North Carolina employed by Hartford Steam Boiler of Connecticut (HSBCT) have inspected the components described in this Owners' Report during the period October 15, 2011 to April 22, 2013, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in the Owners' Report in accordance with the Inspection Plan and as required by the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, test, and corrective measures described in this Owners' Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or pro erty damage or a ss of any kind arising from or connected with this inspection it =**. Commissions NB11473, N.C 1524, N,I spector's Sigr t re National Board, State, Province, and Endorsements Date Z _7 HSBCT 200 Ashford Center North Suite 205 Atlanta, GA. 30338-4860 (800) 417-3721 www.hsbct.com

1.0 GeneralInformation This report describes the Inservice Inspection of Duke Energy Corporation's McGuire Nuclear Station Unit 1 during Outage 1 / EOC 22. This is the first outage of the First Inspection Period of the Fourth Ten-Year Interval. ASME Section Xl, 1998 Edition through the 2000 Addenda was the governing Code for selection and performance of the ISI examinations.

Included in this report are: the inspection status for each examination category, the final inservice inspection plan, the inspection results for each item examined, and corrective action(s) taken when reportable conditions were found. In addition, there is an Owner's Report for the Repair / Replacement Section included for complete NIS-2 documentation of repairs and replacements.

1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.

Reactor Vessel Combustion CE67102 NC-1 78379 20766 Engineering Pressurizer Westinghouse 1471 NC-178395 68-123 Steam Generator 1A BWI 7701-04 NC-302668 157 Steam Generator 1B BWI 7693-01 NC-302669 146 Steam Generator IC BWI 7701-03 NC-302670 155 Steam Generator 1D BWI 7701-02 NC-302671 154 Centrifugal Pacific Pumps 1A-48582 N/A 19 Charging Pump 11B-48583 22 Containment Spray Heat Delta Southern 1A-35005-73-1 NC-147799 3394 Exchanger Co. 1B-35005-73-2 NC-147796 3395 Outage 1/EOC 22 Refueling Outage Report Page 1 of 6 McGuire Unit 1 Revision 0 Section 1 - Fourth Ten-Year Interval July 10, 2013

1.1 IdentificationNumbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.

Excess Letdown Heat Atlas Industrial 1809 NC-1 87817 1554 Exchanger Manufacturing Company Letdown Heat Joseph Oat & Sons, 2049-2A NC-187881 552 Exchanger Inc.

Reciprocating Union Pump N721031 B-603 N/A N/A Charging Pump Company 1A 1-114E841G01 Reactor Coolant Westinghouse 1B 2-114E841 G01 N/A N/A Pump IC 3-114E841G01 1D 4-114E841G01 Reciprocating Metal Bellows 74730-002 N/A 002 Charging Pump Company Accumulator Reciprocating Richmond N2409-10 N/A 75219 Charging Pump Engineering Supply Suction Stabilizer Co.

Residual Heat Joseph Oat & Sons, 1A-2046-2A NC-234202 635 Removal Heat Inc. 1B-2046-2A NC-234201 636 Exchanger Safety Injection Pump Pacific Pumps 1A-49355 N/A 80 11B-49356 81 Regenerative Heat Joseph Oat & Sons, 2047-2A NC-1 87897 595 Exchanger Inc. 596 597 Seal Water Heat Atlas Industrial 1766 NC 1548 Exchanger Manufacturing 169797 Company Seal Water AMF Cuno 1A-13 N/A 3822 Injection Filter _IB-14 3823 Outage I/EOC 22 Refueling Outage Report Page 2 of 6 McGuire Unit 1 Revision 0 Section 1 - Fourth Ten-Year Interval July 10, 2013

1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.

Main Steam Supply to Duke Power Co. SA N/A 4 Auxiliary Equipment System Containment Air Duke Power Co. VQ N/A 12 Release and Addition System Main Steam System Duke Power Co. SM N/A 17 Main Steam Vent to Duke Power Co. SV N/A 18 Atmosphere System Reactor Coolant Duke Power Co. NC N/A 28 System Liquid Waste Recycle Duke Power Co. WL N/A 29 System Refueling Water Duke Power Co. FW N/A 31 System Auxiliary Feedwater Duke Power Co. CA N/A 32 System Residual Heat Duke Power Co. ND N/A 35 Removal System Nuclear Service Water Duke Power Co. RN N/A 36 System Chemical & Volume Duke Power Co. NV N/A 37 Control System Component Cooling Duke Power Co. KC N/A 38 System Main Feedwater Duke Power Co. CF N/A 39 System Containment Spray Duke Power Co. NS N/A 40 System Outage 1I/EOC 22 Refueling Outage Report Page 3 of 6 McGuire Unit 1 Revision 0 Section 1 - Fourth Ten-Year Interval July 10, 2013

1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.

Containment Duke Power Co. RV N/A 41 Ventilation Cooling Water System Safety Injection Duke Power Co. NI N/A 42 System Containment Purge Duke Power Co. VP N/A 6 Ventilation Safety Injection Delta Southern Co. 41617-72-1 NC-178396 3038 Accumulator Tank 1A Safety Injection Delta Southern Co. 41617-72-2 NC-178397 3039 Accumulator Tank 1 B Safety Injection Delta Southern Co. 41617-72-3 NC-1 78398 3040 Accumulator Tank lC Safety Injection Delta Southern Co. 41617-72-4 NC-178399 3041 Accumulator Tank 1D Unit 1 Duke Power Co. N/A N/A 44 1.2 Reference Documents The following reference documents apply to the inservice inspections performed during this report period. A copy may be obtained by contacting the ISI Plan Manager at Duke Energy Carolina's Corporate Office in Charlotte, North Carolina:

Request for Relief (RFR)01-004 Request for Alternative to IWF-5000 OM-1987, Part 4, Snubber Examinations. (Item Number F1.50)

Request for Relief (RFR) 10-MN-001 to use the ASME Section XI 1998 Edition with the 2000 Addenda as the code of record for the first period of the McGuire Unit 1 Fourth Interval ISI Program.

Request for Relief (RFR) I 0-MN-002 to extend S/G primary manway stud exams to the first outage in the fourth interval. Summary Numbers M1..B6.90.0001 through M1 .B6.90.0008.

Outage I/EOC 22 Refueling Outage Report Page 4 of 6 McGuire Unit 1 Revision 0 Section 1 - Fourth Ten-Year Interval July 10, 2013

1.2 Reference Documents Code Case N-460 Alternative Examination Coverage for Class 1 and Class 2 Welds, Section Xl, Division 1.

Code Case N-665 Alternative Requirements for Beam Angle Measurements Using Refracted Longitudinal Wave Search Units.

Code Case N-685 Lighting Requirements for Surface Examinations,Section XI, Division 1.

Code Case N-695 Qualification Requirements for Dissimilar Metal Piping Welds, Section Xl, Division 1.

Code Case N-700 Alternative Rules for Selection of Classes 1, 2 and 3 Vessel Welded Attachments for Examination Section XI, Division 1 (Categories B-K, C-C and D-A)

Code Case N-706-1 Alternative Examination Requirements of Table IWB-2500-1 and Table IWC-2500-1 for PWR Stainless Steel Residual and Regenerative Heat Exchangers, Section Xl, Division. Applicable to Examination Category C-A, Residual Heat Removal Heat Exchanger 1A and Regenerative Heat Exchanger.

Code Case N-722-1 Additional Examinations for PWR Pressure Retaining Welds in Class 1 Components Fabricated with Alloy 600/82/182 Materials, Section Xl, Division 1.

10CFR Part 50, Federal Register, final rule that was issued September 10, 2008 mandates the use of this code case.

Code Case N-729-1 Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure Retaining Partial Penetration Welds Section, XI, Division 1. 10CFR Part 50, Federal Register, final rule that was issued September 10, 2008 mandates the use of this code case.

Code Case N-770-1 Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material with or without Application of Listed Mitigation Activities, Section Xl, Division 1, ASME approval date December 25, 2009.

The following list of Problem Investigation Process (PIP) Serial Numbers were written to address various ISI outage related issues and their actions:

Problem Investigation Process (PIP) M-13-01937 Problem Investigation Process (PIP) M-13-01940 Problem Investigation Process (PIP) M-13-02012 Problem Investigation Process (PIP) M-13-02623 Problem Investigation Process (PIP) M-13-02625 Problem Investigation Process (PIP) M-13-02986 Problem Investigation Process (PIP) M-13-02989 Problem Investigation Process (PIP) M-13-02990 Outage 1/EOC 22 Refueling Outage Report Page 5 of 6 McGuire Unit 1 Revision 0 Section 1 - Fourth Ten-Year Interval July 10, 2013

1.2 Reference Documents Problem Investigation Process (PIP) M-1 3-02992 Problem Investigation Process (PIP) M-13-03552 Problem Investigation Process (PIP) M-13-03553 Problem Investigation Process (PIP) M-13-03619 Problem Investigation Process (PIP) M-13-03681 Problem Investigation Process (PIP) M-13-03682 Problem Investigation Process (PIP) M-13-03686 Problem Investigation Process (PIP) M-13-03708 This List of Problem Investigation Process (PIP) Serial Numbers are referenced in the Section 4 Comments of the Inspection Results for the specific Summary Numbers associated with the PIP.

Outage 1I/EOC 22 Refueling Outage Report Page 6 of 6 McGuire Unit 1 Revision 0 Section 1 - Fourth Ten-Year Interval July 10, 2013

2.0 Third Ten-Year Interval Inspection Status The completion status of inspections required by the 1998 ASME Code Section Xl through the 2000 Addenda is summarized in this section. The requirements are listed by the ASME Section XI Examination Category as defined in Table IWB-2500-1 for Class 1 Inspections, Table IWC-2500-1 for Class 2 Inspections and IWF-2500-1 for Class 1, 2, and 3 Component Supports. Augmented inspections are also included.

Class 1 Inspections Examination Description Inspections Inspections Percentage 1Deferral Category Required Completed Completed Allowed B-A Pressure Retaining 27 0 0% Yes Welds in Reactor Vessel B-B Pressure Retaining 5 0 0% No Welds in Vessels Other than Reactor Vessel B-D Full Penetration 40 0 0% Partial Welded Nozzles in Vessels Inspection Program B

B-F Pressure Retaining 26 0 0% Partial Dissimilar Metal Welds in Vessel Nozzles

- B-G-1 Pressure Retaining 235 29 12.34% Yes Bolting Greater than 2 " in Diameter B-G-2 Pressure Retaining 21 0 0% No Bolting 2" and Less in Diameter

B-J Pressure Retaining 190 0 0% No Welds in Piping

Examination Categories B-F and B-J will become part of a Risk Informed Program when the Relief Request is submitted to the NRC and approval is granted, currently examining welds to ASME Code requirements. Seven Piping Welds were examined volumetrically (UT) under Summary Number R1.11 that will become part of a Risk Informed Program when the Relief Request is submitted to the NRC and approval is granted.

- Summary Numbers M1.B6.90.0001-M1.B6.90.0008 were examined in 1EOC22 and the results are shown in Section 4 of this Report. These examinations will be credited to meet the 3d Interval requirements for Examination Category B-G-1. (Reference Relief Request 10-MN-002) No credit will be taken in 1EOC22 toward meeting Examination Category B-G-1 4 th Interval requirements.

Outage 1I/EOC 22 Refueling Outage Report Page 1 of 6 McGuire Unit I Revision 0 Section 2 - Fourth Ten-Year Interval July 10, 2013

Class 1 Inspections Examination Description Inspections Inspections Percentage 1Deferral Category Required Completed Completed Allowed B-K Welded 2 0 0% No Attachments for Piping, Pumps and Valves B-L-1 Pressure Retaining N/A N/A N/A Yes Welds in Pump Casings B-L-2 Pump Casings 1 0 0% Yes B-M-1 Pressure Retaining N/A N/A N/A Yes Welds in Valve Bodies B-M-2 Valve Body > 4 in. 8 2 25.00% Yes Nominal Pipe Size B-N-1 Interior of Reactor 3 1 33.33% No Vessel B-N-2 Integrally Welded Core Support 2 0 0% Yes Structures and Interior Attachments to Reactor Vessels B-N-3 Removable Core 1 0 0% Yes Support Structures B-O Pressure Retaining 2 1 50% Yes Welds in Control Rod Housings Outage 1/EOC 22 Refueling Outage Report Page 2 of 6 McGuire Unit 1 Revision 0 Section 2 - Fourth Ten-Year Interval July 10, 2013

Class I Inspections Examination Description Inspections Inspections Percentage 'Deferral Category Required Completed Completed Allowed B-P All Pressure REFERENCE SECTION 6.0 OF THIS REPORT Retaining Components B-Q Steam Generator NA See General Requirements Section 3.1 Tubing F-A Class 1 Component 61 9 14.75% No F01.010 Supports I

'Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB 2500-1. These examination categories are exempt from percentage requirements per IWB-2412 (a),

Class 2 Inspections Examination Description Inspections Inspections Percentage Category Required Completed Completed C-A Pressure Retaining 19 6.67 35.11%

Welds in Pressure Vessels C-B Pressure Retaining 11 .66 .06%

Nozzle Welds in Vessels C-C Welded 9 1 11%

Attachments for Vessels, Piping, Pumps and Valves C-D Pressure Retaining N/A N/A N/A Bolting Greater Than 2" in Diameter Outage 1I/EOC 22 Refueling Outage Report Page 3 of 6 McGuire Unit 1 Revision 0 Section 2 - Fourth Ten-Year Interval July 10, 2013

Class 2 Inspections Examination Description Inspections Inspections Percentage Category Required Completed Completed

C-F-1 Pressure Retaining 216 0 0%

Welds in Austenitic Stainless Steel or High Alloy Piping

C-F-2 Pressure Retaining 44 0 0%

Welds in Carbon or Low Alloy Steel Piping C-G Pressure Retaining 8 2 25.00%

Welds in Pumps and Valves C-H All Pressure REFERENCE SECTION 6.0 OF THIS Retaining REPORT Components F-A Class 2 Component 160 25 15.63%

F01.020 Supports

Examination Categories C-F-1 and C-F-2 will become part of a Risk Informed Program when the Relief Request is submitted to the NRC and approval is granted, currently examining welds to code requirements.

Additional Component Support Examinations Class 1, 2 & 3 Examination Description Inspections Inspections Percentage 1Deferral Category Required Completed Completed Allowed F-A Supports other than 34 4 11.76% No F01.040 Piping Supports Class 1, 2 & 3 2F01.050 Component NA NA NA No Supports, Snubbers Class 1, 2 &3 1Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB-2500-1.

2Examinations to be performed per Request for Relief 0 1-004.

Outage 1I/EOC 22 Refueling Outage Report Page 4 of 6 McGuire Unit 1 Revision 0 Section 2 - Fourth Ten-Year Interval July 10, 2013

Augmented I Elective Inspections Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section Xl Code; therefore, it is exempt from ANII review, verification, and/or record certification.

Summary Description Percentage Complete Number Bare Metal Visual Inspection by VT-2 of BMI 100% of Outage 1 /

Nozzles per CC N-722 EOC22 Requirements Met Bare Metal Visual Inspection by VT-2 of RV hot leg No examinations required nozzles per CC N-722 for Outage 1 / EOC22 Bare Metal Visual Inspection by VT-2 of RPV Head 100% of Outage 1/

per CC N-729-1 EOC22 Requirements Met

.34.20 Volumetric/Surface Examination of the RPV Head 100% of Outage 1 /

Partial Penetration Weld Nozzles per CC N-729-1 EOC22 Requirements Met Reactor Coolant Pump Flywheel Inspection No examinations required Program (TS 5.5.7) for Outage 1 / EOC22 M1.G2.1 RPV Closure Head Studs and Nuts per Nuclear No examinations required Guide 1.65 for Outage 1 /EOC22 No examinations required M1.G3.1 Pipe Rupture Protection fofor Outage 1eqCre Outage 1 / EOC22 MI.G5.3 Bare Metal Inspections of the Reactor Vessel 100% of Outage 1 /

Primary Nozzles per MRP-139 EOC22 Requirements Met Bare Metal Visual Inspection of the Pressurizer 100% of Outage 1 /

M1 .G6.2 Manway Diaphram Seal Weld per NRC Bulletin E0C22 Requirements Met 2004-01 Volumetric Examination of Chemical and Volume No examinations required MI.G9.1 Control (ND) System Mixing Tees to detect for Outage 1/ E0C22 Thermal Fatigue Cracking per MRP-192 Volumetric Examination of the Auxiliary Head 100% of Outage 1 I Adapter (AHA) Welds per CCN-770-1 EOC22 Requirements Met VT-1 Examination of the Reactor Vessel Internal No examinations required Clevis Insert Fastners per UFSAR 18.2.16 for Outage 1 / EOC22 Outage 1/EOC 22 Refueling Outage Report Page 5 of 6 McGuire Unit 1 Revision 0 Section 2 - Fourth Ten-Year Interval July 10, 2013

Summary Description PercentageComplete Number VT-1 Examination of the Loop B Cold Leg Welded No examinations required M1 .G12.1 Joints that connect the elbow to adjacent piping fo Outag eq1/ reC per UFSAR 18.2.16 (Milestone ID No.4.21-M03) for Outage 1 / EOC22 Volumetric (UT) Examination of base metal to 100% of Outage 1 /

M1..G14.1 detect Thermal Fatigue Cracking per requirements EOC22 Requirements Met of EPRI MRP-146, Revision 1 Weld Overlay Section Xl Appendix Q Examination Description Inspections Inspections Percentage Category Required Completed Completed M1.QI.1 Weld Overlay 2 0 0%

Outage I/EOC 22 Refueling Outage Report Page 6 of 6 McGuire Unit 1 Revision 0 Section 2 - Fourth Ten-Year Interval July 10, 2013

3.0 FinalInservice Inspection Plan The final Inservice Inspection Plan shown in this section lists all ASME Section Xl Class 1, Class 2, Class 3, and Augmented credited for this report period.

Outage 1/EOC 22 Refueling Outage Report Page 1 of 1 McGuire Unit 1 Revision 0 Section 3- Fourth Ten-Year Interval July 10, 2013

DUKE ENERGY Inservice Inspection DatabaseManagementSystem ScheduleWorks Plan Report McGuire 1, 4th Interval, Outage 8 (EOC-22)

This report includes all changes through addendum 4MNS1-008 Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class I System Description Comments CategoryAUG M1.B15.80.0001 1-RPV-BMI-Nozzles Class 1 NC MC-ISIN4-1553-01.00 NDE-69 VT-2 SS-Inconel NA NAI NA MCM-1201.01-0165/002 Inconel Transition Weld to Stainless Steel Tube (02/15/2012 latest change per Plan Addendum 1MNS-080) Bare metal visual examination by a qualified VT-2 inspector of all the BMI nozzles per the requirements of ASME Code Case N-722-1. The bare metal visual examination shall include an inspection of the bottom head and Alloy 600 transition weld between the Alloy 600 tube and the stainless steel tube. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#8.

This exam added per QA 513-J ER-MNS-09-01.

These augmented examinations are being rescheduled per QA-513-J Form, Tracking Number ER-MNS-10-03, initiated by C.A.

Cruz of the Materials and NDE Services Group. All bottom mounted instrument (BMI) nozzles and transition welds will be examined every refueling outage.

Comments added per Plan Addendum 4MNS1-001: Reference PIP No.G-12-01476, Action No. 4.

M1.84.10.0002 1-RPV-Head-Multiple Class 1 NC MC-!SlN4-1553-01.00 NDE-70 VT-2 CS NA NA/NA MCM-1201.01-0186/001 RPV Closure Head Outer Surface Each refueling outage that the full bare metal visual (Ml.B4.10.0001) is not performed. If EDY<8 and no flaws unacceptable for continued service have been detected, the reexamination frequency of the full bare metal visual may be extended to every third refueling outage or 5 calendar years, whichever is less, provided an IWA-2212 VT-2 visual examination of the head is performed under the insulation through multiple access points in outages that the full bare metal VE is not completed. Provided EDY remains less than 8, the next full bare metal visual will be due in 1EOC21. Therefore, IWA-2212 VT-2 visuals shall be performed in 1EOC20 and continue into every outage that the full bare metal visual is not performed. EDY Calculation will continue to be updated and if EDY greater than or equal to 8 these IWA-2212 VT-2 visuals will no longer take place, because a bare metal visual per CC N-729-1 will be required every refueling outage. Schedule Flexibility: Time between inspections may be shortened, but not lengthened. For additional information reference QA-513J (ER-MNS-09-02) or contact Rachel Doss in the Materials and NDE Services Section, Nuclear Technical Services Division. Acceptance criteria specified In ASME Code Case N-729-1 subject to conditions in 10CFR 50.55a (g)(6)(ii)(D)(2) through (6). Relevant conditions for the purpose of the VE shall include areas of corrosion, boric acid deposits, discoloration, and other evidence of nozzle leakage. Once a licensee implements this requirement, the First Revised NRC Order EA-03-009 no longer applies and is deemed to be withdrawn.

Comments added per Plan Addendum 4MNS1-001: Reference PIP No. G-12-01476, Action No.4.

Printed O7/17/13jec5908 v.06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 1 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class / System Description Comments Category AUG M1.B4.20.0001 1RPV-Head-Pen Class 1 NC MC-ISIN4-1553-01.00 54-ISI-603 UT CS/Alloy 600 NA NA/NA 02-9168092D-003 MCM1201.01-0186/001 RPV Closure Head Partial-Penetration Weld Nozzles Examine all nozzles every 8 calendar years or before RIY=2.25 whichever is less. Time between inspections may be shortened but not lengthened, last inspection performed 1EOC-18. For coverage requirements see Figure 2 of Code Case N-729-1. As specified in ASME Code Case N-729-1 subject to the conditions specified in 10CFR 50.55a (g)(6)(ii)(D)(2) through (6), volumetric and/or surface examination of pressure retaining partial penetration weld nozzles. For additional information reference QA-513J (ER-MNS-09-04) or contact Rachel Doss in the Materials and NDE Services Section, Nuclear Technical Services Division. This inspection replaces Augmented examinations Ml.G5.1.0001 and M1.G5.2.0001 required by NRC Order EA-03-009. Fleet Outage Management has determined this examination starts 1EOC-22 which is the first outage in the fourth interval of the ISI Plan.

(Vendor is required for this inspection)

Comments added per Plan Addendum 4MNS1-001: Reference PIP No. G-12-01476, Action No. 4. Inspection required is UT.

PT/ECT may be necessary as a contingency. Code Case N-729-1 requires a volumetric and/or surface exam be performed on the upper head partial-penetration welds. The inspection technique of choice is UT. However, if the required coverage cannot be obtained by UT alone, a surface inspection (PT/ECT) may be necessary to achieve the required coverage. 10 CFR 50a(g)(6)(ii)(D)(3) states, "...the licensee shall perform volumetric and/or surface examination of essentially 100 percent of the required volume or equivalent surfaces of the nozzle tube, as identified by Figure 2 of ASME Code Case N-729-1. A demonstrated volumetric or surface leak path assessment through all J-groove welds shall be performed. Ifa surface examination is being substituted for a volumetric examination on a portion of a penetration nozzle that is below the toe of the J-groove weld (Point E on Figure 2 of ASME Code Case N-729-1], the surface examination shall be of the inside and outside wetted surface of the penetration nozzle not examined volumetrically."

M1 .84.20.0001 1RPV-Head-Pen Class 1 NC MC-ISIN4-1553-01.00 54-ISI-604 UT CS/Alloy 600 NA NA/ NA 02-9168092D-003 MCM1201.01-0186/001 RPV Closure Head Partial-Penetration Weld Nozzles Examine all nozzles every 8 calendar years or before RIY=2.25 whichever is less. Time between Inspections may be shortened but not lengthened, last inspection performed 1EOC-1 8. For coverage requirements see Figure 2 of Code Case N-729-1. As specified in ASME Code Case N-729-1 subject to the conditions specified in 10CFR 50.55a (g)(6)(ii)(D)(2) through (6), volumetric and/or surface examination of pressure retaining partial penetration weld nozzles. For additional information reference QA-513J (ER-MNS-09-04) or contact Rachel Doss in the Materials and NDE Services Section, Nuclear Technical Services Division. This inspection replaces Augmented examinations M1.G5.1.0001 and M1.G5.2.0001 required by NRC Order EA-03-009. Fleet Outage Management has determined this examination starts 1EOC-22 which Is the first outage in the fourth interval of the ISI Plan.

(Vendor is required for this inspection)

Comments added per Plan Addendum 4MNS1-001: Reference PIP No. G-12-01476, Action No. 4. Inspection required is UT.

PT/ECT may be necessary as a contingency. Code Case N-729-1 requires a volumetric and/or surface exam be performed on the upper head partial-penetration welds. The inspection technique of choice is UT. However, ifthe required coverage cannot be obtained by UT alone, a surface inspection (PT/ECT) may be necessary to achieve the required coverage. 10 CFR 50a(g)(6)(ii)(D)(3) states, "...the licensee shall perform volumetric and/or surface examination of essentially 100 percent of the required volume or equivalent surfaces of the nozzle tube, as identified by Figure 2 of ASME Code Case N-729-1. A demonstrated volumetric or surface leak path assessment through all J-groove welds shall be performed. Ifa surface examination is being substituted for a volumetric examination on a portion of a penetration nozzle that is below the toe of the J-groove weld [Point E on Figure 2 of ASME Code Case N-729-1], the surface examination shall be of the inside and outside wetted surface of the penetration nozzle not examined volumetrically."

Rr-inted 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 2 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category AUG M1.134.20.0002 1RPV-Head-Vent Class 1 NC MC-ISIN4-1553-01.00 54-1SI-460 ET CS/Alloy 600 NA NA/NA MCM-1201.01-0186/001 RPV Closure Head Vent Line Weld Nozzles All nozzles every 8 calendar years or before RIY=2.25 whichever is less. Time between inspections may be shortened but not lengthened, last inspection performed 1 EOC-1 8. For coverage requirements see Figure 2 of Code Case N-729-1. As specified In ASME Code Case N-729-1 subject to the conditions specified in 10CFR 50.55a (g)(6)(ii)(D)(2) through (6), volumetric and/or surface examination of pressure retaining partial penetration weld nozzles. For additional information reference QA-513J (ER-MNS-09-04). For additional information, contact Rachel Doss in the Materials and NDE Services Section, Nuclear Technical Services Division. This inspection replaces Augmented examinations MI.G5.1.0001 and MI.G5.2.0001 required by NRC Order EA-03-009.

Fleet Outage Management has determined this examination starts 1EOC-22 which is the first outage in the fourth interval of the ISI Plan. (A UT and PT examination is required for this item). (Vendor is required for this inspection)

Comments added per Plan Addendum 4MNS1-001: Reference PIP No. G-12-01476, Action No. 4. Inspection required is ECT. PT may be necessary as a contingency. At the time of the original submittal of the 513J forms, the inspections listed were based off of past inspections and current industry guidance. Therefore, it was thought that the ventline would receive UT of the tube material and PT of the j-groove weld. However, since that time, MRP has determined EPRI should not pursue a UT qualification program for ventlines. Therefore, the inspection technique for ventlines (tube material and j-groove weld) is now ECT. If ECT is not successful or identifies a suspect location on the j-groove weld, PT will be performed on the j-groove weld - PT is only a contingency at this time.

M1..B4.20.0002 1RPV-Head-Vent Class 1 NC MC-ISIN4-1553-01.00 54-ISI-494 ET CS/Alloy 600 NA NA/NA MCM-1201.01-0186/001 RPV Closure Head Vent Line Weld Nozzles All nozzles every 8 calendar years or before RIY=2.25 whichever is less. Time between inspections may be shortened but not lengthened, last inspection performed 1EOC-18. For coverage requirements see Figure 2 of Code Case N-729-1. As specified in ASME Code Case N-729-1 subject to the conditions specified in 10CFR 50.55a (g)(6)(ii)(D)(2) through (6), volumetric and/or surface examination of pressure retaining partial penetration weld nozzles. For additional information reference QA-513J (ER-MNS-09-04). For additional information, contact Rachel Doss in the Materials and NDE Services Section, Nuclear Technical Services Division. This inspection replaces Augmented examinations M1.G5.1.0001 and M1.G5.2.0001 required by NRC Order EA-03-009.

Fleet Outage Management has determined this examination starts 1 EOC-22 which is the first outage in the fourth interval of the ISI Plan. (A UT and PT examination is required for this item). (Vendor is required for this inspection)

Comments added per Plan Addendum 4MNS1-001: Reference PIP No. G-12-01476, Action No. 4. Inspection required is ECT. PT may be necessary as a contingency. At the time of the original submittal of the 513J forms, the inspections listed were based off of past inspections and current industry guidance. Therefore, it was thought that the ventline would receive UT of the tube material and PT of the j-groove weld. However, since that time, MRP has determined EPRI should not pursue a UT qualification program for ventlines. Therefore, the inspection technique for ventlines (tube material and j-groove weld) is now ECT. If ECT is not successful or identifies a suspect location on the j-groove weld, PT will be performed on the j-groove weld - PT is only a contingency at this time.

v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 3 of 39 Printedjec5908 07/17/13 Printed O7/17/13jec5908 v.06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 3 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class / System Description Comments Category AUG M1.G10.1.0001 1RPV1-462C-SE Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT CS-Inconel NA 0.630 16.250 50374 MCFI-1N138 Dissimilar MCM 1201.01-113 RPV Head to UHI Tube 180 degrees, Pc. 459-01 to Pc. 446-04.

(Latest change per Plan Addendum 1 MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1.The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#1 1.

M1.G10.1.0002 1RPV1-462B-SE Risk Segment NC-089 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT CS-Inconel NA 0.630/6.250 50374 MCFI-1NI38 Dissimilar MCM-1201.01-113 RPV Head To UHI Tube 90 DEG. PC. 459-01 TO 446-04 (Latest change per Plan Addendum 1MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified In ASME Code Case N-770-1.The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional Information on this change see PIP G-11-0978 CA#11.

M1.G10.1.0003 1RPV1-462A-SE Risk Segment NC-089 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT CS-Inconel NA 0.630/6.250 50374 MCFI-1NI38 Dissimilar MCM-1201.01-113 RPV Head To UHI Tube 0 DEG. PC. 459-01 TO PC. 446-04 (Latest change per Plan Addendum 1MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1.The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#11.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 4 of 39

This report Includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class / System Description Comments Category AUG MI.G10.1,0004 1RPV1-462D-SE Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT CS-Inconel NA 0.630/6.250 50374 MCFI-1N138 Dissimilar MCM-1201.01-113 RPV Head To UHI Tube 270 DEG. PC.459-01 TO PC.446-04 (Latest change per Plan Addendum 1MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1 .The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second Inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-11-0978 CA#11.

M1.G10.1.0005 1N1 FW38-1 Risk Segment NC-089 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT SS-Inconel NA 0.630/6.250 50374 MCFI-1NI38 Dissimilar MCM 1201.01-113 Pipe Cap to UHI Tube (Latest change per Plan Addendum 1MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1 .The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-11-0978 CA#11.

M1.G10.1.0006 1NI1FW38-2 Risk Segment NC-089 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT SS-Inconel NA 0.630/6.250 50374 MCFI-1NI38 Dissimilar MCM-1201.01-113 Pipe Cap to UHI Tube (Latest change per Plan Addendum 1MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1.The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#1 1.

M1.G10.1.0007 1N11FW38-3 Risk Segment NC-089 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-10 UT SS-Inconel NA 0.630 / 6.250 50374 MCFI-1NI38 Dissimilar MCM-1201.01-113 Pipe Cap to UHI Tube (Latest change per Plan Addendum 1 MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1 .The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#1 1.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 5 of 39

This report Includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category AUG M1.G10.1.0008 1NI1FW38-4 Risk Segment NC-089 Class 1 NC MC-ISIN4-1553-01,00 PDI-UT-10 UT SS-Inconel NA 0.630/6.250 50374 MCFI-1NI38 Dissimilar MCM-1201.01-113 Pipe Cap to UHI Tube (Latest change per Plan Addendum 1MNS-080) MNS Unit 1 shall perform a baseline examination of all auxiliary head adaptors (AHAs) welds during the spring 2013 1EOC22 outage and then proceed with the normal inspection frequency as specified in ASME Code Case N-770-1.The AHAs shall be categorized as Inspection Item B per ASME Code Case N-770-1 and shall receive volumetric examinations every second inspection period not to exceed 7 years. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-11-0978 CA#11.

M1.G14.1.0001 Cold Leg 1D Nozzle 4-1 Class 1 NC MC-ISIN4-1553-01.00 NDE-995 UT SS 160 0.281 /1.500 50202 MCFI-1 NC-044 1NC141 Nozzle to Pipe This examination is added per QA-513J Form initiated by Greg Shipley of the McGuire Civil Design/DB Group to meet the requirements of EPRI MRP-146, Revision 1. Reference QA Tracking Number ER-MNS-12-06 (QA-513J with Attachment A) for details of the areas to be examined. Perform a volumetric (UT) examination of the base metal to detect thermal fatigue cracking.

The area to be examined Is the 1-1/2" Boron Injection Line from the RCS Cold Leg 1D Nozzle 4-1 toward Valve 1N10021. The UT examinations to be performed will cover an approximately 1" wide band out from the toe of fillet Weld No. NCI F1613 and along the bottom of the 1-1/2" Boron Injection Line for a length of 6.75" toward Valve 1 NI0021. This exam is to be performed every outage starting with MIEOC22 for the life of the plant. For additional information contact Greg Shipley of the McGuire Civil Design/DB Group. Reference PIP Serial No.M-09-0217, Action No. 9.

M1 .G14.1.0002 Crossover Leg 1A Nozzle 1-6 Class 1 NC MC-ISIN4-1553-01.00 NDE-995 UT SS 160 0.344/2.000 8279-0410 MCFI-1NC-003 Elbow to Pipe This examination is added per QA-513J Form initiated by Greg Shipley of the McGuire Civil DesignrDB Group to meet the requirements of EPRI MRP-146, Revision 1. Reference QA Tracking Number ER-MNS-12-07 (QA-513J with Attachment A) for details of the areas to be examined. Perform a volumetric (UT) examination of the base metal to detect thermal fatigue cracking.

The area to be examined is the 2" RCS Drain Line from the RCS Crossover Leg 1A Nozzle 1-6 toward Valve 1NCO004. The UT examination to be performed will cover a length approximately 1" from the toe of the lower fillet Weld No. NCI F248. This exam is to be performed every other outage starting with M1 EOC22 for the life of the plant. For additional information contact Greg Shipley of the McGuire Civil Design/DB Group. Reference PIP Serial No.M-09-0217, Action No. 9.

Printed 07/17113 jec5908 v. 06/18109 SDQA Cat "C" McGuire 1 7/1712013 9:23:17 AM Page 6 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class / System Description Comments Category AUG M1.G14.1.0003 Cold Leg 1D Nozzle 4-5 Class 1 NC MC-ISIN4-1553-01.00 NDE-995 UT SS 160 0.438/3.000 50225 MCFI-1 NC-034 1 NCP348 Elbow to Pipe This examination is added per QA-513J Form initiated by Greg Shipley of the McGuire Civil Design/DB Group to meet the requirements of EPRI MRP-146, Revision 1. Reference QA Tracking Number ER-MNS-12-08 (QA-513J with Attachment A) for details of the areas to be examined. Perform a volumetric (UT) examination of the base metal and weld to detect thermal fatigue cracking. The area to be examined is the 3" Alt. Charging Line from the RCS Cold Leg ID Nozzle 4-5 toward Valve 1NV0018. The UT examinations to be performed will cover butt Weld No. NCP348-3, the base metal at the bottom of the pipe 13.5" from the tangent plane, and the elbow bend base metal using the bottom of the horizontal pipe to indicate how far to examine (Reference Subassembly 1NCP348). This exam is to be performed every outage starting with MlEOC22 for the life of the plant. For additional information contact Greg Shipley of the McGuire Civil Design/DB Group. Reference PIP Serial No.M-09-0217, Action No. 9.

MI.G14.1.0004 Cold Leg 1A Nozzle 1-3 Class 1 NC MC-ISIN4-1553-01.00 NDE-995 UT SS 160 0.438/3.000 50225 MCFI-1 NC-034 I NCP336 Elbow to Pipe This examination is added per QA-513J Form initiated by Greg Shipley of the McGuire Civil Design/DB Group to meet the requirements of EPRI MRP-146, Revision 1. Reference QA Tracking Number ER-MNS-12-09 (QA-513J with Attachment A) for details of the areas to be examined. Perform a volumetric (UT) examination of the base metal and weld to detect thermal fatigue cracking. The area to be examined is the 3" Charging Line from the RCS Cold Leg 1A Nozzle 1-3 toward Valve 1NVO015. The UT examinations to be performed will cover butt Weld No. NCP336-1, the base metal at the bottom of the pipe beginning at Weld No.

NCP336-1 and running a total length of 13.5" toward Valve 1NVO015 (Reference Subassembly 1NCP336), and the elbow base metal down to in line with the bottom of horizontal pipe to Weld No. NCP336-1. This exam is to be performed every outage starting with M1 EOC22 for the life of the plant. For additional information contact Greg Shipley of the McGuire Civil Design/DB Group.

Reference PIP Serial No.M-09-0217, Action No. 9.

MI .G5.3.0001 1RPV3-445E-SE Class 1 NC MC-ISIN4-1553-01.00 PDI-1SI-254- UT Inconel NA 2.330/29.000 NAVSHIPS Test Block SE-NB MCM-1201.01-0119/001 RV Primary Outlet Nozzle 1A Weld and Butter (Latest change per Plan Addendum 1MNS-080) The reactor vessel outlet nozzles shall be volumetrically inspected every 5 years in accordance with ASME Code Case N-770-1 and shall be categorized as Inspection Item A-2. The next volumetric examinations shall occur during the spring 2013 1EOC22 outage in the 4th interval. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-11-0978 CA#11 VT Examinations removed per Tracking Number ER-MNS-09-010.

Vendor needed to perform UT exam.

Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 7 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class I System Description Comments CategoryAUG Ml .G5.3.0002 1 RPV3-445F-SE Class 1 NC MC-ISIN4-1553-01.00 PDI-ISI-254- UT Inconel NA 2.330/29.000 NAVSHIPS Test Block SE-NB MCM-1201.01-0119/004 RV Primary Outlet Nozzle 1 B Weld and Butter (Latest change per Plan Addendum 1MNS-080) The reactor vessel outlet nozzles shall be volumetrically inspected every 5 years in accordance with ASME Code Case N-770-1 and shall be categorized as Inspection Item A-2. The next volumetric examinations shall occur during the spring 2013 1EOC22 outage in the 4th interval. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#1 1 VT Examinations removed per Tracking Number ER-MNS-09-010.

Vendor needed to perform UT exam.

Ml .G5.3.0003 1RPV3-445G-SE Class 1 NC MC-ISIN4-1553-01.00 PD1-1SI-254- UT Inconel NA 2.330/29.000 NAVSHIPS Test Block SE-NB MCM-1201.01-0119/007 RV Primary Outlet Nozzle 1C Weld and Butter (Latest change per Plan Addendum 1MNS-080) The reactor vessel outlet nozzles shall be volumetrically inspected every 5 years in accordance with ASME Code Case N-770-1 and shall be categorized as Inspection Item A-2. The next volumetric examinations shall occur during the spring 2013 1EOC22 outage in the 4th interval. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-11-0978 CA#1 1 VT Examinations removed per Tracking Number ER-MNS-09-010.

Vendor needed to perform UT exam.

Ml .G5.3.0004 1RPV3-445H-SE Class 1 NC MC-ISIN4-1553-01.00 PD1-1SI-254- UT Inconel NA 2.330/29.000 NAVSHIPS Test Block SE-NB MCM-1201.01 -0119/010 RV Primary Outlet Nozzle 1D Weld and Butter (Latest change per Plan Addendum 1MNS-080) The reactor vessel outlet nozzles shall be volumetrically inspected every 5 years in accordance with ASME Code Case N-770-1 and shall be categorized as Inspection Item A-2. The next volumetric examinations shall occur during the spring 2013 1EOC22 outage in the 4th interval. Any questions concerning this exam shall be directed to the NGO Corporate Programs Group. For additional information on this change see PIP G-1 1-0978 CA#1 1 VT Examinations removed per Tracking Number ER-MNS-09-010.

Vendor needed to perform UT exam.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 8 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class I System Description Comments CategoryAUG Mi .G6.2.0001 1PZR-MANWAY Class 1 NC MC-ISIN4-1553-01.00 NDE-68 VT-2 CS-Inconel NA NA/NA MCM-1201.01-0170/001 PZR Manway Diaphram Seal Weld Bare Metal Visual Exam by VT-2 qualified inspector. Examine the gap between the Pressurizer Manway Cover and Manway for evidence of diaphram plate seat weld leakage. (For responsible individual, contact J.M. Shuping, Alloy 600 Enginering Nuclear Technical Services). Reference NRC Bulletin 2004-01and Form QA-513J (Tracking Number ER-MNS-07-002). To be done every Outage (EOC-18 through EOC-31)

Category B-G-1 M1.86.10.0015 1RPV-449-02-01 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000/ N/A B06.010.001 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1201.01 -0186 is the Reactor Vessel Manual.

Ml .B6.10.0016 1RPV-449-02-02 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7,000 / N/A B06.010.002 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

Ml .B6.10.0017 1RPV-449-02-03 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000/ N/A B06.010.003 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 9 of 39

This report Includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class I System Description Comments Category B-G-I M1.B6.10.0018 IRPV-449-02-04 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000 / N/A B06.010.004 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1 B6.10.0019 1RPV-449-02-05 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000 / N/A B06.010.005 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.16.10.0020 1 RPV-449-02-06 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000/ N/A B06.010.006 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-12201.01-0186 is the Reactor Vessel Manual.

M1.86.10.0021 1RPV-449-02-07 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000 / N/A 806.010.007 MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1. 86.10.0022 1 RPV-449-02-08 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS 7.000/ N/A B06.010.008 MCM-1201.01 -0186 MCM-1201.01-0224 Reactor Vessel Closure Head Nuts Visual examination of all nuts, examination may be done in place under tension, when disassembled or when removed.

Drawing MCM-1 201.01-0186 is the Reactor Vessel Manual.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 10 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class / System Description Comments Category B-G-1 M1 .6,100.0001 1SGA-MW-X2-Y1 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A/N/A B06.100.001 MCM-1201.01-0791/001 MCM-1201.01-0796/001 STEAM GENERATOR 1A PRIMARY INLET MANWAY FLANGE SURFACE. X2-Y1 QUADRANT. 1998/2000 Addenda of the Section XI Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This Is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth Interval.

M1 .86,100.0002 1SGA-MW-X2-Y2 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A/ N/A B06.100.002 MCM-1201,01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1A PRIMARY OUTLET MANWAY FLANGE SURFACE. X2-Y2 QUADRANT. 1998/2000 Addenda of the Section XI Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

M13.6.100.0003 1SGB-MW-X1-Y1 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/Al N/A B06.100.003 MCM-1201.01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1B PRIMARY INLET MANWAY FLANGE SURFACE. X1-Y1 QUADRANT. 1998/2000 Addenda of the Section XI Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

M13.6.100.0004 1SGB-MW-X1-Y2 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A / N/A 106.100.004 MCM-1201,01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1B PRIMARY OUTLET MANWAY FLANGE SURFACE. X1 -Y2 QUADRANT. 1998/2000 Addenda of the Section X1 Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

M1.B6.100.0005 ISGC-MW-X2-Y1 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A / N/A B06.100.005 MCM-1201.01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1C PRIMARY INLET MANWAY FLANGE SURFACE. X2-Y1 QUADRANT. 1998/2000 Addenda of the Section XI Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/1712013 9:23:17 AM Page 11 of 39

This report includes all changes through addendum 4MNS1 -008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickdNPS Cal Blocks Componenet ID 2 Class I System Description Comments Category B-G-1 M1,16.100.0006 I SGC-MW-X2-Y2 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A/N/A B06.100.006 MCM-1201.01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1C PRIMARY OUTLET MANWAY FLANGE SURFACE. X2-Y2 QUADRANT. 1998/2000 Addenda of the Section XI Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

M1,16.100.0007 1SGD-MW-X1-Y1 Class I NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A / N/A B06.100.007 MCM-1201.01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1D PRIMARY INLET MANWAY FLANGE SURFACE. X1-Y1 QUADRANT. 199812000 Addenda of the Section Xl Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

M1.86.100.0008 1SGD-MW-X1-Y2 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A / N/A B06.100.008 MCM-1201.01-0791/001 MCM-1201.01-0769/001 STEAM GENERATOR 1D PRIMARY OUTLET MANWAY FLANGE SURFACE. X1-Y2 QUADRANT. 1998/2000 Addenda of the Section Xl Code Table IWB-2500-1 Note 4 Examination includes 1 in annular surface of flange surrounding each stud. This Is required for the flange surface when connection is disassembled. This examination needs to be alighned with station steam generator work for the fourth interval.

M1 .B6.180.0003 1RCP-1A-F Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 4.500/ N/A 13C-010 B06.180.001 MCM-1201.01-0007/001 MCM-1201.01-0120/002 Reactor Coolant Pump 1A Main Flange Bolts (24 Bolts)

Ml .B6.30.0001 1RPV-449-01-04 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000/N/A 50501 B06.030.004, B06.030.004A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1 201.01-0186 is the Reactor Vessel Manual.

Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 12 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numberrs Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class / System Description Comments Category B-G-1 M1.B6.30.0010 1RPV-449-01-05 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.005, B06.030.005A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.B6.30.0011 1RPV-449-01-06 Class 1 NC MC-lSlN4-1553-01.00 PDI-UT-5 UT CS 7.000 /N/A 50501 B06.030.006, B06.030.006A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.16.30.0012 1RPV-449-01-07 Class 1 NC MC-ISlN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.007, B06.030.007A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.B6.30.0013 1RPV-449-01-01 Class 1 NC MC-lSlN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.001, B06.030.001A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.B6.30.0014 IRPV-449-01-02 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.002, B06.030.002A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 13 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numberrs Procedure Insp Req Material Sched ThickJNPS Cal Blocks Componenet ID 2 Class I System Description Comments Category B-G- 1 M1 .B6.30.0015 1RPV-449-01 -03 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000 N/A 50501 B06.030.003, B06.030.003A MCM-1201.01-0186 MCM-1201,01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.B6.30.0032 1RPV-449-01 -08 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.008, B06.030.008A MCM-1201.01-0186 MCM-1201,01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

Ml .B6.30.0033 1 RPV-449-01 -09 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000 N/A 50501 B06.030.009, 806.030.009A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

M1.1B6.30.0034 1 RPV-449-01-10 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000tN/A 50501 B06.030.010, B06.030.010A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1201.01-0186 is the Reactor Vessel Manual.

Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 14 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickJNPS Cal Blocks Componenet ID2 Class I System Description Comments Category B-G-1 M1.1B6.30.0035 1RPV-449-01-11 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.011, B06.030.01 1A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1 201.01-0186 is the Reactor Vessel Manual.

M1.1B6.30.0036 1RPV-449-01-12 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-5 UT CS 7.000/ N/A 50501 B06.030.012, B06.030.012A MCM-1201.01-0186 MCM-1201.01-0224 Reactor Vessel Closure Head Studs when removed Drawing MCM-1 201.01-0186 is the Reactor Vessel Manual.

M1 .86.50.0013 1RPV-449-03-01 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A/N/A B06.050.001 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1.66.50.0014 1 RPV-449-03-02 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A/ N/A B06.050.002 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1.16.50.0015 1 RPV-449-03-03 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A I N/A B06.050.003 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1.86.50.0016 1 RPV-449-03-04 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A / N/A B06.050.004 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

Printed 07/17/13 jec5908 v.06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 15 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class / System Description Comments Category B-G-1 M1.B6.50.0017 1 RPV-449-03-05 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A /N/A B06.050.005 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1.B6.50.0018 1 RPV-449-03-06 Class 1 NC MC-lSIN4-1553-01.00 NDE-62 VT-1 CS N/A/N/A B06.050.006 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1.1B6.50.0019 1 RPV-449-03-07 Class 1 NC MC-1IIN4-1553-01.00 NDE-62 VT-1 CS N/A/ N/A B06.050.007 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1 .B6.50.0020 1 RPV-449-03-08 Class 1 NC MC-ISIN4-1553-01.00 NDE-62 VT-1 CS N/A / N/A B06.050.008 MCM-1201.01-0224 RV Closure Head Washers visual inspection of all exposed surfaces If actural thickness is req'd., a field measurement will be req'd.

M1..B6.90.0001 1SGA-MW-X2-Y1 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.500/ N/A 7C015 B06.090.001 MCM-1201.01-0747/001 MCM-1201.01-0684/001 STEAM GENERATOR 1A PRIMARY INLET MANWAY BOLTING. 20 STUDS. X2-Y1 QUADRANT Per PIP M-1 1-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth interval. The 1 EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat 'C" McGuire 1 7/17/2013 9:23:17 AM Page 16 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Number s Procedure Insp Req Material Sched Thlck/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category B-G-1 M1 .86.90,0002 1SGA-MW-X2-Y2 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.500/ N/A 7C015 806.090.002 MCM-1201.01-0747/001 MCM-1201.01-0684/001 STEAM GENERATOR 1A PRIMARY OUTLET MANWAY BOLTING. 20 STUDS. X2-Y2 QUADRANT Per PIP M-11-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1 EOC21 third interval and will be performed in 1 EOC22 fourth interval. The 1EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

M13.6.90,0003 1SGB-MW-X1-Y1 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.625/ N/A 7C015 B06.090.003 MCM-1201.01-0747/001 MCM-1201.01-0683/001 STEAM GENERATOR 1B PRIMARY INLET MANWAY BOLTING. 20 STUDS. X1-Y1 QUADRANT Per PIP M-11-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth Interval. The 1EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

M1.B6.90.0004 ISGB-MW-XI-Y2 Class 1 NC MC-ISIN4-1553-01,00 PDI-UT-4 UT CS 2.625/ N/A 7C015 B06.090.004 MCM-1201.01-0747/001 MCM-1201.01-0683/001 STEAM GENERATOR 1B PRIMARY OUTLET MANWAY BOLTING. 20 STUDS. X1-Y2 QUADRANT.

Per PIP M-1 1-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth interval. The 1EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 17 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISOIDWG Numbes s Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class / System Description Comments Category B-G- 1 M1 .B6.90.0005 1SGC-MW-X2-Y1 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.500/ N/A 7C015 B06.090.005 MCM-1201.01-0747/001 MCM-1201.01-0684/001 STEAM GENERATOR 1C PRIMARY INLET MANWAY BOLTING. 20 STUDS. X2-Y1 QUADRANT Per PIP M-1 1-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth interval. The 1 EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

M1 .B6.90.0006 1SGC-MW-X2-Y2 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.500/ N/A 7C015 B06.090.006 MCM-1201.01-0747/001 MCM-1201.01-0684/001 STEAM GENERATOR 1C PRIMARY OUTLET MANWAY BOLTING. 20 STUDS. X2-Y2 QUADRANT Per PIP M-11-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth interval. The 1EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

M1.B6.90.0007 1SGD-MW-X1-Y1 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.500/ N/A 7C015 B06.090.007 MCM-1201.01-0747/001 MCM-1201.01-06831001 STEAM GENERATOR 1D PRIMARY INLET MANWAY BOLTING. 20 STUDS. X1-Y1 QUADRANT Per PIP M-1 1-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth interval. The 1EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

Printed 07117/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 711712013 9:23:17 AM Page 18 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickJNPS Cal Blocks Componenet ID 2 Class / System Description Comments Category B-G-I M1 .B6.90.0008 1SGD-MW-X1-Y2 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-4 UT CS 2.500 / N/A 7C015 B06.090.008 MCM-1201.01-0747/001 MCM-1201.01-0683/001 STEAM GENERATOR 1D PRIMARY OUTLET MANWAY BOLTING. 20 STUDS. X1-Y2 QUADRANT Per PIP M-1 1-04662 and NRC approval of Relief Request 10-MN-002 dated June 23, 2011 the third interval manway stud volumetric examinations will not be done in 1EOC21 third interval and will be performed in 1EOC22 fourth interval. The 1EOC22 examination will not count as part of the fourth interval examinations.

This examination needs to be alighned with station steam generator work for the fourth interval.

Category B-8 M1.B9.11.0085 1NC1F1705 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-02.00 PDI-UT-2 UT SS 160 0.719/6.000 50423 MCFI-1 NC-48 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Tee Thermal Fatigue Exam (R1.11) Required. UT Exam Performed in 1EOC22.

M1.B9.11.0086 1NC1F1707 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-02.00 PDI-UT-2 UT SS 160 0.719 / 6.000 50423 MCFI-1 NC-48 PDI-UT-2-M1 PDI-UT-2A-M Elbow To Tee Thermal Fatigue Exam (R1. 11) Required.

M1.B9.11.0110 1NC128-2 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 140 1.000 10.000 50209 MCFI-1 NC-47 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Elbow Thermal Fatigue Exam (R1.11) Required.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 19 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickJNPS Cal Blocks Componenet ID 2 Class / System Description Comments CategoryB-J M1.B9.11.0111 1NC-128-1 Risk Segment NC-033 Class 1 NC MC-ISIN-1553-01.00 PDI-UT-2 UT SS 140 1.000 / 10.000 50209 MCFI-1 NC-47 PDI-UT-2-M1 PDI-UT-2A-M Pipe to Elbow Thermal Fatigue Exam (RI. 11) Required.

M1.1B9.11.0112 1NC-102-2 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 140 1.000 10.000 50209 MCFI-1 NC-47 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Elbow Thermal Fatigue Exam (RI. 11) Required.

M1.1B9.11.0113 1NC-102-1 Risk Segment NV-019AC Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 140 1.000/10.000 50209 MCFI-1 NC-47 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Elbow Thermal Fatigue Exam (RI. 11) Required.

M1..B9.11.0169 1NC-102-9 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 140 1.000 10.000 50209 MCFI-1NC-47 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Pipe Thermal Fatigue Exam (RI. 11) Required.

M1.1B9.11.0175 1NClF-1739 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 160 0,719/6.000 50423 MCFI-1 NC-49 PDI-UT-2-M1 PDI-UT-2A-M Elbow To Reducer Thermal Fatigue Exam (RI.11) Required.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 20 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID2 Class I System Description Comments Category B-J M1.1B9.11.0198 1N1451-1 Risk Segment NC-033 Class 1 NI MC-ISIN4-1562-03.00 PDI-UT-2 UT SS 160 0.906/8.000 50311 MCFI-1NI-53 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Reducer Thermal Fatigue Exam (R1.11)and IGSCC Exam (R1.16) Required.

M1.B9.11.0338 1N1451-4 Risk Segment NC-033 Class 1 NI MC-ISiN4-1562-03.00 PDI-UT-2 UT SS 160 0.906/8.000 50311 MCFI-1 NI-53 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Pipe Thermal Fatigue Exam (R1.11) and IGSCC Exam (R1.16) Required.

Category B-M-2 M1 .812.50.0031 GROUP-4 Class 1 NI MC-ISIN4-1562-02.00 NDE-64 VT-3 SS N/A / 10.000 MCM-1205.36-0010 MCM-1205.36-0037 GROUP 4. 10" ATWOOD-MORRILL CHECK VALVE. INSPECT ONE OF THE FOLLOWING VALVES IN GROUP 4, ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION. VALVES INI-60, 1NI-82, AND 1NI-94 ARE VALVE ITEM NUMBER 4J-059, VALVE 1NI-71 IS VALVE ITEM NUMBER 4J-054. THESE TWO VALVE ITEM NUMBERS ARE FOR THE SAME TYPE VALVE AND WILL REMAIN IN THE SAME GROUP. Examination shall include all pressure retaining surfaces made accessible for examination by disassembly.

M1.B12.50.0035 GROUP-8 Class 1 NI MC-ISIN4-1562-03.00 NDE-64 VT-3 SS N/A / 6.000 MC-ISIN4-1562-03.01 MCM-1205.36-0028 GROUP 8. 6' WESTINGHOUSE CHECK VALVE. INSPECT ONE OF THE FOLLOWING VALVES IN GROUP 8: 1NI-160, INI-175 AND 1 NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION. VALVE ITEM NUMBER IS 5J-001.

Examination shall include all pressure retaining surfaces made accessible for examination by disassembly.

SDQA Cat "C' McGuire 17/17/20139:23:17 AM Page 21 of 39 Printed 07/17/13 jec5908 Printed 07/17/13 v. 06/18/09 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 21 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class I System Description Comments Category B-N-I M1.B13.10.0001 1RPV-INTERIOR Class 1 NC MC-ISIN4-1553-01.00 NDE-63 VT-3 CS/SS Clad NA 0.000/ NA B13.010.001 MCM-1201.01-0056 Dissimilar MCM-1201.01-146 Reactor Vessel Examine all accessible surfaces during each inspection period if these surfaces are made accessible as a result of planned outage activities, including those associated with removal of the core barrel for augmented examinations. IfCore Barrel is not removed, examine per Footnote 1 of IWB-2500-1 Examination Category B-N-1.

For ISI purposes, the beltline region is considered to be the area between the core plates as shown on Dwg MCM-1201.01-0056.

If actual thickness is required at any location it must be field measured/verified.

Category B-O M1.B14.10.0022 1RPV-CRDM-64 Class 1 NC MC-ISIN4-1553-01.00 NDE-35 PT SS-Inconel 0.630/4.000 B14.010.010 Circumferential MCM-1201.01-0204/001 Dissimilar MCM-1201.01-0242/001 CRDM Housing 10% of peripheral (17) CRD housings/ examination requirement Figure No. IWB-2500-18 (a)

For additional Information on CRDM's reference Manual MCM-1201.01-0186 and drawings MCM-1201.01-0224/001 and MCM-1201.01-0243/001.

Category C-A M1.C1.10.0001 1RHR-1A-3-4 Class 2 ND MC-ISIN4-1561-01.00 NDE-68 VT-2 SS 0.750/N/A C011.010.050 Circumferential MCM-1201.06-22 Nozzle belt To Flange RESIDUAL HEAT REMOVAL HEAT EXCHANGER 1A.

Residual Heat Removal Heat Exchanger 1A Nozzle Belt to Flange Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Residual Heat Removal Heat Exchanger 1A is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G 480 and file Nos. MC-1212.04, MC-1 223.04 and MC-1 223.11 (Record Retention Code # 000252). Reference RHR Heat Exchanger lB.

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1 561-01.00.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/1712013 9:23:17 AM Page 22 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class I System Description Comments Category C-A Ml.Cl.20.0001 5141-3-HD1 Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.075 / NA C01.020.074 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Nozzle belt To Head REGENERATIVE HEAT EXCHANGER. (Shell 3)

Regenerative Heat Exchanger (Shell 3) Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1 212.04, MC-1 223.04 and MC-1223.11 (Record Retention Code # 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02. Thickness dimension is minimum, if actual thickness is required, a field measurement will be required.

Reference drawing MCM 1201.06-0054 M1.Cl.20.0002 5141-3-HD2 Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070/NA C01.020.075 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Shell To Head REGENERATIVE HEAT EXCHANGER. (Shell 3)

Regenerative Heat Exchanger (Shell 3) Shell to Head Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1 223.04 and MC-1223.1 1 (Record Retention Code # 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02. Thickness dimension Is minimum. If actual thickness is required, a field measurement will be required.

Reference drawing MCM 1201.06-0054 1ec5908 v. 06/18/09 SOQA Cat 'C" McGuire i 711 7/2013 9:23:17 AM Page 23 of 39 Printed 07/17/13 Printed 07/17/13jec59O8 v.06/18/09 SDQA Cat "C" McGuire 1 7/1712013 9:23:17 AM Page 23 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID2 Class / System Description Comments Category C-A M1.C1.20.0010 1SGD-W144 Class 2 CF MC-ISIN4-1591-01.01 NDE-820 UT CS 4.125/NA 5139385 C01.020.001 Circumferential MCM-1201.01-0782.001 Steam drum To Steam drum head STEAM GENERATOR ID FIGURE IWC-2500-1 APPLIES M1.C1.20.0010 1SGD-W144 Class2 CF MC-ISIN4-1591-01.01 NDE-640 UT CS 4.125/NA 5139385 C01.020.001 Circumferential MCM-1201.01-0782.001 Steam drum To Steam drum head STEAM GENERATOR 1D FIGURE IWC-2500-1 APPLIES M1.C1.20.0011 iRHR-1A-2-3 Class 2 ND MC-ISIN4-1561-01.00 NDE-68 VT-2 SS 0.750 / N/A C01.020.030 Circumferential MCM-1201.06-0022 Nozzle belt To Head RESIDUAL HEAT REMOVAL HEAT EXCHANGER 1A.

Residual Heat Removal Heat Exchanger 1A Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Residual Heat Removal Heat Exchanger 1A is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

Ifevidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection interval Inservice Inspection Plan. Reference drawing MC-ISIL-1 561-01.00.

Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 24 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickJNPS Cal Blocks Componenet ID2 Class I System Description Comments Category C-A M1.C1.20.0012 5141-1-HD1 Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.075 / NA C01.020.070 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Nozzle belt To Head REGENERATIVE HEAT EXCHANGER. (Shell 1)

Regenerative Heat Exchanger (Shell 1) Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1 212.04, MC-1223.04 and MC-1223,11 (Record Retention Code # 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02. Thickness dimension is minimum. If actual thickness is required, a field measurement will be required.

Reference drawing 1201.06-0054 M1.C1.20.0013 5141-1 -HD2 Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.020.071 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Shell To Head REGENERATIVE HEAT EXCHANGER. (Shell 1)

Regenerative Heat Exchanger (Shell 1) Shell to Head Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02. Thickness dimension is minimum. Ifactual thickness is required, a field measurement will be required.

Reference drawing MCM 1201.06-0054 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 25 of SY Printed 07/17/13 Printed jecS9O8 v.

07/17/13jec59O8 v.06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 25 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class I System Description Comments Category C-A M1 .Cl.20.0014 5141-2-HDI Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.0751NA C01.020.072 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Nozzle belt To Head REGENERATIVE HEAT EXCHANGER. (Shell 2)

Regenerative Heat Exchanger (Shell 2) Nozzle Belt to Head Weld. Code Case N-706 has been Incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

Ifevidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02. Thickness dimension is minimum. If actual thickness is required, a field measurement will be required.

Reference drawing MCM 1201.06-0054 M1.C1.20.0015 5141-2-HD2 Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.020.073 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Shell To Head REGENERATIVE HEAT EXCHANGER. (Shell 2)

Regenerative Heat Exchanger (Shell 2) Shell to Head Weld. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

Ifevidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02. Thickness dimension is minimum. If actual thickness is required, a field measurement will be required.

Reference drawing MC 1201.06-0054 Printed 07/17/13jec5908 v.06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 26 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class / System Description Comments Category C-A M1 .C1.30.0001 1SGA-W65 Class 2 CF MC-ISIN4-1591-01.01 NDE-640 UT CS 3.687 / N/A 5135230 C01.030.001 Circumferential MCM-1201.01-0782.001 Tubesheet To Shell STEAM GENERATOR 1A FIGURE IWC-2500-2 APPLIES M1 .Cl.30.0001 1SGA-W65 Class2 CF MC-ISIN4-1591-01.01 NDE-820 UT CS 3.687/ N/A 5135230 C01.030.001 Circumferential MCM-1201.01-0782.001 Tubesheet To Shell STEAM GENERATOR 1A FIGURE IWC-2500-2 APPLIES M1.Cl.30.0006 5141-1-NB-TS Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 /NA C01.030.020 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Nozzle belt To Tubesheet REGENERATIVE HEAT EXCHANGER. (SHELL 1)

Regenerative Heat Exchanger (Shell 1) Nozzle Belt to Tubesheet. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1 554-01.02.

Reference drawing MCM 1201.06-0054 Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 27 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class / System Description Comments Category C-A MI.C1.30.0007 5141-1-TS-SH Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.030.021 Circumferential MCM-1201.06-0015 MCM-1201,06-0046.001 Tubesheet To Shell REGENERATIVE HEAT EXCHANGER. (SHELL 1)

Regenerative Heat Exchanger (Shell 1) Tubesheet to Shell. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212,04, MC-1223.04 and MC-1223.11 (Record Retention Code# 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02.

Reference drawing MCM 1201.06-0054 M1.C1.30.0008 5141-2-NB-TS Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.030.022 Circumferential MCM-1201.06-0015 MCM-1201,06-0046.001 Nozzle belt To Tubesheet REGENERATIVE HEAT EXCHANGER. (SHELL 2)

Regenerative Heat Exchanger (Shell 2) Nozzle Belt to Tubesheet. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger Is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1 212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

Ifevidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan, Reference drawing MC-ISIL-1 554-01.02.

Reference drawing MCM 1201.06-0054 1ec5908 v. 06/18/09 SDQA Cat 'C" McGuire 17/17/2013 9:23:17 AM Page 28 ot3~

Printed 07/17/13 Printed 07/17/13jec59O8 v.06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 28 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickJNPS Cal Blocks Componenet ID2 Class I System Description Comments Category C-A M1.C1,30.0009 5141-2-TS-SH Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.030.023 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Tubesheet To Shell REGENERATIVE HEAT EXCHANGER. (SHELL 2)

Regenerative Heat Exchanger (Shell 2) Tubesheet to Shell. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code# 000252).

Ifevidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1554-01.02.

Reference drawing MCM 1201.06-0054 MI .C1.30.0010 5141-3-NB-TS Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.030.024 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Nozzle belt To Tubesheet REGENERATIVE HEAT EXCHANGER. (SHELL 3)

Regenerative Heat Exchanger (Shell 3) Nozzle Belt to Tubesheet. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

Ifevidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1 554-01.02.

Reference drawing MCM 1201.06-0054 SDQA Cat "C" McGuire 17/17/2013 9:23:17 AM Page 29 of 39 Printed 07/17/13 1ec5908 Printed 07/17113 v. 06/18/09 jec5908 v. 06/16/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 29 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID2 Class / System Description Comments Category C-A M1.C1.30.0011 5141-3-TS-SH Class 2 NV MC-ISIN4-1554-01.02 NDE-68 VT-2 SS 1.070 / NA C01.030.025 Circumferential MCM-1201.06-0015 MCM-1201.06-0046.001 Tubesheet To Shell REGENERATIVE HEAT EXCHANGER. (SHELL 3)

Regenerative Heat Exchanger (shell 3) Tubesheet to Shell. Code Case N-706 has been incorporated for use during the Fourth Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).

If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.

This exam will be performed under the Pressure Test Program, reference McGuire fourth Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISIL-1 554-01.02.

Reference drawing MCM 1201.06-0054 Category C-B MI.C2.33.0001 1RHR-1A-INLET Class 2 ND MC-ISIN4-1561-01.00 NDE-68 VT-2 SS 0.750 / 14.000 C02.033.

MCM-1201.06-0022 Nozzle to Shell RESIDUAL HEAT REMOVAL HEAT EXCHANGER 1A INLET NOZZLE A VT-2 OF WEEP HOLE IN REINFORCING PAD.

Reference Table IWC-2500-1 Note (5)

M1.C2.33.0002 1RHR-1A-OUTLET Class 2 ND MC-ISIN4-1561-01.00 NDE-68 VT-2 SS 0.750/14.000 C02.033.

MCM-1201.06-0022 Nozzle to Shell RESIDUAL HEAT REMOVAL HEAT EXCHANGER 1A OUTLET NOZZLE B VT-2 OF WEEP HOLE IN REINFORCING PAD.

Reference Table IWC-2500-1 Note (5).

SOQA Cat 'C' McGuire 1 7/17/2013 9:23:17 AM Page 30 of 39 Printed jec5908 07/17113 jec5908 Printed 07/17113 v. 06/18/09

v. 06/18109 SDQA Cat "C" McGuire 17/1712013 9:23:17 AM Page 30 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category C-C Ml .C3.30.0001 1CCPUMP-1A-LEG Class2 NV MC-ISIN4-1554-03.01 NDE-35 PT SS UNK/NA C03.030.001 Centrifugal Chg Pmp 1A MCM-1201.05-228 Centrifugal Chg Pmp 1A CENTRIFUGAL CHARGING PUMP 1A 4 SUPPORT LEGS WELDED ATTACHMENT. VERIFY 4" LINE OUTLET FROM PUMP TO VALVE 1 NV-802 AND 6" LINE INLET FROM PUMP TO VALVE I NV-224 TO VERIFY CORRECT PUMP BEFORE INSPECTION. EXAMINE WITH M1.7F1.40.0061.

If the material type or thickness is required to complete the examination, then the material type and thickness must be field verified.

Category C-F-I M1.C5.11.0787 1N1201-6 Risk Segment NV-019AC Class 2 NI MC-ISIN4-1562-02.00 PDI-UT-2 UT SS 160 0.719/6.000 50423 MCFI-INI-77 PDI-UT-2-M1 PDI-UT-2A-M Pipe To Pipe Thermal Fatigue Exam (R1. 11) Required.

Category C-G M1 .C6.20.0003 1CF-126B-1 Risk Segment N/A Class 2 CF MC-ISIN4-1591-01.01 NDE-25 MT CS N/A N/A C06.020.002A Valve MCFI-1CF8 MCM-1205.00-0989/001 Valve Body to Valve Body Weld Figure IWC-2500-8 applies.

Thickness cannot be obtained from vendor drawing - determine in field at time of examination.

M1.C6.20.0017 ICF-26-1 Risk Segment N/A Class 2 CF MC-ISIN4-1591-01.01 NDE-25 MT CS N/A N/A C06.020.001A Valve MCFI-1CF4 MCM-1205.23-0004 Valve Body To Bonnet Weld Figure IWC-2500-8 applies.

Thickness cannot be obtained from vendor drawing - determine in field at time of examination.

SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 31 of 39 Printed jec5908 v.

07/17/13 jec5908 Printed 07/17/13 v. 06/18/09 06118/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 31 of 39

This report Includes all changes through addendum 4MNS1-008 McGulre 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class / System Description Comments Category D-A MI.DI.10.0008 1KCHX-SUPPORT-IA Class 3 KC MC-ISIN4-1573-01.00 NDE-65 VT-1 CS 1.000 / NA D01.010.007 MCM-1201.06-24 KCHX SUPPORTS Component Cooling Heat Exchanger 1A Welded Attachment.

This welded attachment shall utilize the requirements of Code Case N-700. Reference PIP G-08-00499 ACA#2 and CA#5.

Examine the welded attachment identified on drawing MCM-1201.06-24 sht 5 as fixed support.

M1.D1.10.0009 1KCST-SUPPORT-1A Class 3 KC MC-ISIN4-1573-01.01 NDE-65 VT-1 CSISS 0.250/NA D01.010.008 MCM-1201.04-113 Dissimilar KC Surge Tank Support Component Cooling Surge Tank 1A Welded Attachment. Equipment Number 1KCTKO009 Category F-A M1.FI.10.0001 1-MCR-NC-500 Class 1 NC MCSRD-NC-01/sht.1 NDE-66 VT-3 NA NA /14.000 F01.010.001C Spring Hgr Spring Hgr M1.Fl.10.0003 1-MCR-NC-506 Class 1 NC MCSRD-NC-03/sht.2 NDE-66 VT-3 NA NA /6.000 F01.010.003C Spring Hgr Spring Hgr MI.F1.10.0004 1-MCR-NC-507 Class 1 NC MCSRD-NC-03/sht.2 NDE-66 VT-3 NA NA /6.000 F01.010.004A Rigid Support Rigid Support M1.FI.10.0026 1-MCR-ND-500 Class 1 ND MCSRD-ND-01/sht.1 NDE-66 VT-3 NA NA /14.000 F01.010.051A Rigid Support Rigid Support M1.F1.10.0032 1-MCR-NI-515 Class 1 NI MCSRD-NI-011sht.1 NDE-66 VT-3 NA NA /6.000 F01.010.101C Hyd Snubber Hyd Snubber Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 32 of 39

This report Includes all changes through addendum 4MNS1 -008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Mateuial Sched ThickJNPS Cal Blocks Componenet ID 2 Class I System Description Comments Category F-A M1.F1.10.0033 1-MCR-NI-521 Class 1 NI MCSRD-NI-01/sht.4 NDE-66 VT-3 NA NA /10.000 F01.010.102A Rigid Support Rigid Support MI.F1.10.0035 1-MCR-NI-528 Class 1 NI MCSRD-NI-01/sht.3 NDE-66 VT-3 NA NA /6.000 F01.010.104C Hyd Snubber Hyd Snubber M1.F1.10.0066 1-MCR-NV-1291 Class 1 NV MCSRD-NV-09/sht.1 NDE-66 VT-3 NA NA/2.000 F01.010.163C Mech Snubber Mech Snubber M1.F1.10.0067 1-MCR-NV-1292 Class 1 NV MCSRD-NV-09/sht.1 NDE-66 VT-3 NA NA /2.000 F01.010.164C Spring Hgr Spring Hgr M1.F1.20.0076 1-MCR-NI-676 Class 2 NI MCSRD-NI-ll/Sht.1 NDE-66 VT-3 NA NA/4.000 F01.020.211C Hyd Snubber M1iF1.20.0077 1-MCR-NI-685 Class 2 NI MCSRD-Nl-11/Sht.2 NDE-66 VT-3 NA NA/2.000 F01.020.212B Rigid Restraint M1.F1.20.0394 1-MCA-ND-H69 Class 2 ND MCSRD-NDA/Sht.4 NDE-66 VT-3 NA NA /12.000 F01.020.179A Rigid Restraint Mi.F1.20.0617 1-MCA-NV-H461 Class2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NAI6.000 F01.020.301A Rigid Support M1.F1.20.0658 1-MCA-NV-H611 Class 2 NV MCSRD-NVA/Sht.5 NDE-66 VT-3 NA NA I 3.000 F01.020.

Rigid Restraint Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 33 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class / System Description Comments Category F-A MI .Fl.20.0673 1-MCA-NV-H708 Class 2 NV MCSRD-NVA/Sht.4 NDE-66 VT-3 NA NA /2.000 F01.020.

Rigid Restraint Ml.F1.20.1182 1-MCA-ND-H84 Class 2 ND MCSRD-NDA/Sht.3 NDE-66 VT-3 NA NA/ 8.000 F01.020.163A Rigid Support MI.F1.20.1199 1-MCA-NI-H5 Class 2 NI MCSRD-NIA/Sht.1 NDE-66 VT-3 NA NA /6.000 FOI.020.202A Rigid Support M1.F1.20.1200 1-MCA-NI-H6 Class 2 NI MCSRD-NiA/Sht.1 NDE-66 VT-3 NA NA 18.000 F01.020.203C Spring Hgr M .F1.20.1203 1-MCA-NS-H2 Class 2 NS MCSRD-NSC/Sht.1 NDE-66 VT-3 NA NA /10.000 F01.020.251A Rigid Restraint Ml .Fl.20.1208 1-MCA-ND-H17 Class 2 ND MCSRD-NDA/Sht.2 NDE-66 VT-3 NA NA /8.000 F01.020.153B Rigid Restraint MI. F1.20.1210 1-MCA-ND-H23 Class 2 ND MCSRD-NDA/Sht.2 NDE-66 VT-3 NA NA 1 8.000 F01.020.155C Spring Hgr Mt.Fl.20.1212 1-MCA-ND-H59 Class 2 ND MCSRD-NDA/Sht.6 NDE-66 VT-3 NA NA /8.000 F01.020.157B Rigid Restraint MI.F1.20.1215 1-MCA-ND-H76 Class 2 ND MCSRD-NDA/Sht.8 NDE-66 VT-3 NA NA /8.000 F01.020.160A Rigid Restraint Ml. Fl .20.1223 1-MCA-CA-H426 Class 2 CA MCSRD-CAO/Sht.2 NDE-66 VT-3 NA NA /6.000 F01.020.010A Rigid Support Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 34 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID2 Class I System Description Comments Category F-A M1 .F1.20.1283 1-MCA-NV-H6 Class2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NA /6.000 F01.020.303A Rigid Support M. Fl .20.1284 1-MCA-NV-H8 Class2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NA /8.000 F01.020.304A Rigid Support MI.F1.20,1285 1-MCA-NV-H11 Class 2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NA / 8.000 F01.020.305A Rigid Support M1. F 1.20.1286 1-MCA-NV-H12 Class 2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NA/8.000 F01.020.306A Rigid Support M1.F1.20.1287 1-MCA-NV-H13 Class 2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NA /6.000 F01.020.307A Rigid Support M1.F1.20.1288 1-MCA-NV-H14 Class 2 NV MCSRD-NVD/Sht.1 NDE-66 VT-3 NA NA /6.000 F01.020.308C Spring Hgr M1.F1.20.1317 1-MCA-SA-H19 Class 2 SA MCSRD-SAAISht.1 NDE-66 VT-3 NA NA / 6.000 F01.020.501C Spring Hgr M1.F1.20.1348 1-MCA-SV-H17 Class 2 SV MCSRD-SVA/Sht.2 NDE-66 VT-3 NA NA /6.000 F01.020.602C Hyd Snubber M1.F1.20.1350 1-MCA-VQ-H1O Class 2 VQ MCSRD-VQA/Sht.1 NDE-66 VT-3 NA NA/6.000 F01.020.651C Hyd Snubber M1.F1.20.1401 1-MCA-SM-H 184 Class 2 SM MCSRD-SMA/Sht.4 NDE-66 VT-3 NA NA /34.000 F01.020.

Hyd Snubber Printed 07117/13 jec5908 v. 06118109 SDQA Cat "C" McGuire 1 7/1712013 9:23:17 AM Page 35 of 39

This report Includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category F-A MI.F1.30,0053 1-MCA-KC-1091 Class 3 KC MCSRD-KC-303/Sht.1 NDE-66 VT-3 NA NA! 6.000 F01.030.111A MC-ISIN4-1573-01.00 Rigid Restraint M1.F 1.30.0065 1-MCA-KC-1090 Class 3 KC MCSRD-KC-303/Sht.1 NDE-66 VT-3 NA NA /6.000 F01.030.123B MC-ISIN4-1573-01,00 Rigid Restraint M1.F 1.30.0066 1-MCA-KC-2190 Class 3 KC MCSRD-KC-303/Sht.1 NDE-66 VT-3 NA NA/ 6.000 F01.030.124B MC-ISIN4-1573-01.00 Rigid Restraint Ml Fl.30,0088 1-MCA-RN-H979 Class3 RN MCSRD-RN-301/Sht.2 NDE-66 VT-3 NA NA/20.000 F01.030.208B MC-ISIN4-1574-02.00 Rigid Restraint M 1. F 1.30.0089 1-MCA-RN-2024 Class 3 RN MCSRD-RN-301/Sht.3 NDE-66 VT-3 NA NA /18.000 F01.030.209B MC-ISIN4-1574-03.01 Rigid Restraint M 1.F 1. 30.0090 1-MCA-RN-2330 Class 3 RN MCSRD-RN-301/Sht.4 NDE-66 VT-3 NA NA/20.000 F01.030.210B MC-ISIN4-1574-03.00 Rigid Restraint M1.F1.30,0649 1-MCA-RN-1260 Class 3 RN MCSRD-RN-316 NDE-66 VT-3 NA NA /8.000 F01.030.214A MC-ISIN4-1574-03.00 Rigid Restraint M1.Ft.30.0761 1-MCA-RN-2240 Class 3 RN MCSRD-RN-301/Sht.2 NDE-66 VT-3 NA NA /30.000 F01.030.213A MC-ISIN4-1574-01.01 Rigid Support Printed 07/17/13 jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 36 of 39

This report includes all changes through addendum 4MNSI -008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class / System Description Comments Category F-A M1 F 1.30.0948 1-MCA-RN-H937 Class 3 RN MCSRD-RN-301/Sht.2 NDE-66 VT-3 NA NA /18.000 F01.030.212C MC-ISIN4-1574-01.01 Mech Snubber M. Fl .30.1122 1-MCA-CA-H346 Class 3 CA MCSRD-CAK/Sht.1 NDE-66 VT-3 NA NA /8.000 F01.030.026A Rigid Support M1.F1.30.1123 1-MCA-CA-H347 Class 3 CA MCSRD-CAK/Sht.1 NDE-66 VT-3 NA NA /8.000 F01.030.027C Mech Snubber M1 .Fl.40.0067 1KCST-SUPPORT-1A Class 3 KC MCM-1201.04-113 NDE-66 VT-3 NA NA/NA F01.040.022B MC-ISIN4-1573-01.01 KCST SUPPORT COMPONENT COOLING SURGE TANK 1A SUPPORT.

WORK WITH M1.D1.10.0009 Ml .Fl.40.0068 1 KCP-SUPPORT-1A1 Class 3 KC MCM-1201.05-143 NDE-66 VT-3 NA NA / NA F01.040.023C MC-ISIN4-1573-01.00 KCP SUPPORT COMPONENT COOLING PUMP 1A1 SUPPORT.

Ml.Fl.40.0069 1KCHX-SUPPORT-1A Class 3 KC MCM-1201.06-24/Sht.03 NDE-66 VT-3 NA NA/NA F01.040.024B MC-ISIN4-1573-01.00 MCM-1 201.06-24/Sht.05 KCHX SUPPORT COMPONENT COOLING HEAT EXCHANGER 1A SUPPORT. WORK WITH M1.D1.10.0008.

Ml .Fl.40.0106 1CRAP-SUPPORT-1 Class 3 YC MCM-1201.05-298 NDE-66 VT-3 NA NA / NA F01.040.038 MC-ISIN4-1618-01.00 CRAP SUPPORT CONTROLLED AREA CHILLED WATER PUMP 1 SUPPORT McGuire 1 7/17/2013 9:23:17 AM Page 37 of 39 Printed 07/17/13 Printed jec5908 v.

07/17/13 jec5908 06/18/09 V. 06/18109 Cat "C SDQA Cat SDQA "C" McGuire 1 7/17/2013 9:23:17 AM Page 37 of 39

This report includes all changes through addendum 4MNSI-008 McGuire 1, 4th Interval,outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category R-A M1.R1.11.0044 1NC91-2 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 160 0.719/6.000 50423 R01.011.020 MCFI-1NC-54 PDI-UT-2-M1 PDI-UT-2A-M Circumferential Pipe To Elbow Thermal Fatigue Exam (R1.11) Required.

MI.R1.11.0297 1NC1F1744 Risk Segment NC-043 Class 1 NC MC-ISIN4-1553-02.00 PDI-UT-2 UT SS 160 0.531 /4.000 50275 RO1.011.

MCFI-1NC-49 PDI-UT-2-M1 PDI-UT-2A-M Circumferential Elbow To Pipe Thermal Fatigue Exam (R1. 11) Required.

M1.R1.11.0298 1NC1F1745 Risk Segment NC-043 Class 1 NC MC-ISIN4-1553-02.00 PDI-UT-2 UT SS 160 0.531 /4.000 50275 R01.011.

MCFI-1 NC-49 PDI-UT-2-M1 PDI-UT-2A-M Circumferential Pipe To Elbow Thermal Fatigue Exam (R1.11) Required M1.R1.11.0566 1NC91-1 Risk Segment NC-033 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 160 0.719/6.000 50423 R01.011.

MCFI-1 NC-54 PDI-UT-2-M1 PDI-UT-2A-M Circumferential Elbow To Pipe Thermal Fatigue Exam (Ri.11) Required M1.R1.11.0575 1NCP333-1 Risk Segment NC-022 Class 1 NC MC-ISIN4-1553-01.00 PDl-UT-2 UT SS 160 0.438 3.000 50225 RO1.011.

MCFI-1NC-33 PDI-UT-2-M1 PDI-UT-2A-M Circumferential Pipe To Elbow Thermal Fatigue Exam (R1.11) Required.

Printed 07117113 jec5908 v. 06/18109 SDQA Cat "C" McGuire 1 711712013 9:23:17 AM Page 38 of 39

This report includes all changes through addendum 4MNS1-008 McGuire 1, 4th Interval, outage 8 (EOC-22)

Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category R-A M1.R1.11.0576 1NCP334-1 Risk Segment NC-022 Class 1 NC MC-ISIN4-1553-01.00 PDI-UT-2 UT SS 160 0.438/3.000 50225 R01.011.

MCFI-1NC-33 PDI-UT-2-M1 PDI-UT-2A-M Circumferential Tee To Pipe Thermal Fatigue Exam (R1.11) Required.

M1.R1.11.0577 1NCP334-2 Risk Segment NC-022 Class 1 NC MC-ISIN-1553-01.00 PDI-UT-2 UT SS 160 0.438 /3.000 50225 R01.011, MCFI-1NC-33 PDI-UT-2-MI PDI-UT-2A-M Circumferential Tee To Reducer Thermal Fatigue Exam (RI.11) Required.

M1.R1.11.2434 1NVFW53-64 Risk Segment NI-063B Class 2 NV MC-ISIN4-1554-01.02 PDI-UT-2 UT SS 160 0.343/2.000 PDI-UT-2-M1 MCFI-1NV-53 PDI-UT-2A-M Pipe To Pipe Thermal Fatigue Exam (R1. 11) Required.

Reference PIP G-12-02002, Action No. 3. RI-ISI Segment 1NV-0080B. Greater than 90% coverage of one of the welds in RI-ISI Segment 1NV-0080B must be obtained to meet code coverage requirements in order to avoid a relief request for limited coverage.

The NDE Group may substitute another weld within this segment (1 NV-0080B), upon approval by the SXIP Group, in order to obtain maximum coverage to meet code coverage requirements. RI-ISI Segment 1 NV-0080B consists of the following Weld IDs:

1 NVFW53-64, 1NVFW53-44, 1NVFW53-45, 1NVFW53-46, 1NVFW53-54, 1NVFW53-32, 1 NVFW53-47, 1NVFW53-43, 1NVFW53-28, and 1 NVFW53-53.

End of Report STATISTICS ONLY Class 1 98 Class 2 50 Class 3 17 Total by Class 165 Systems 165 Total Count 165 Printed 07/17/13jec5908 v. 06/18/09 SDQA Cat "C" McGuire 1 7/17/2013 9:23:17 AM Page 39 of 39

4.0 Results of Inspections Performed The results of each examination shown in the final Inservice Inspection Plan (Section 3 of this report) are included in this section. The completion date and status for each examination are shown. All examinations revealing reportable indications and any corrective action required as a result are described in further detail in Subsections 4.1 and 4.2. Corrective measures performed and limited examinations are described in further detail in Subsections 4.3 and 4.4.

4.1 ReportableIndications 1EOC 22 (Outage 1) had no reportable indications during this report period.

4.2 Corrective Action Corrective action is action taken to resolve flaws and relevant conditions, including supplemental examinations, analytical evaluations, repair / replacement activities, and corrective measures. There were no recordable conditions that required corrective action during this report period.

4.3 Corrective Measures Corrective measures are actions (such as maintenance) taken to resolve relevant conditions, but not including supplemental examinations, analytical evaluations, and repair / replacement activities. Any corrective measures performed for examinations associated with this report period will be shown on the examination data sheets which are on file at the Duke's Corporate Office in Charlotte, North Carolina.

4.4 Limited Examinations There were no limitations (i.e., 90% or less of the required examination coverage obtained) identified for examinations associated with this outage report.

Outage 1I/EOC 22 Refueling Outage Report Page 1 of 1 McGuire Unit 1 Revision 0 Section 4 - Fourth Ten-Year Interval July 10, 2013

DUKE ENERGY CORPORATION Inservice Inspection DatabaseManagement System Scheduleworks Inspection Results McGuire1. 4th Interval Outage 8 (EOC-22j Inspection Results For 1 EOC22 Insp insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1.B12.50.00331 GROUP-4 NI 03/30/13 RFC N N N VT- 13-867 Rejectable condition found acceptable for continued service. Reference PIP M 03619.

M1.B12.50.0035 GROUP-8 NI 04/01/13 REC N N N VT- 13-884 Rejectable condition found acceptable for continued service. Reference PIP M 03686 and PIP M-13-03708.

M1 .113.10.0001 1RPV-INTERIOR NC 03/27/13 CLR N N N VT-13-856 M1.B14.10.0022 1RPV-CRDM-64 NC 03/29/13 CLR N N N PT-13-053 M1.B135.80.0001 1-RPV-BMI-Nozzles NC 03/19/13 CLR N N N VT- 13-840 M1 .84.10.0002 1-RPV-Head-Multiple NC 03/28/13 CLR N N N VT- 13-857 M1.B4.20.0001 1RPV-Head-Pen NC 04/11/13 CLR N N N 51-9203100-001 Reference AREVA NP Inc. McGuire Unit 1 MlEOC22 RVCH Examination Final Report No. 51 - 9203100 - 001.

NC 04/11/13 CLR N N N 51-9203100-001 Reference AREVA NP Inc. McGuire Unit 1 MlEOC22 RVCH Examination Final Report No. 51 - 9203100 - 001.

SDQA Cat "C' McGuire 1 7/17/2013 10:03:00 AM Page 1 of 20 Printed 7/17/2013 Printed jec5908 v.

AM jec5908 10:05:00 AM 7/17/2013 10:05:00 01/01/08

v. 01/01/08 SDQA Cat "C", McGuire 1 7/17/2013 10:03:00 AM Page 1 of 20

Inspection Results For 1EOC22 Insp /nsp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .B4.20.0002 1RPV-Head-Vent NC 03/24/13 CLR N N N 51-9203100-001 Reference AREVA NP Inc. McGuire Unit 1 M1EOC22 RVCH Examination Final Report No. 51 - 9203100 - 001.

NC 03/24/13 CLR N N N 51-9203100-001 Reference AREVA NP Inc. McGuire Unit 1 M1EOC22 RVCH Examination Final Report No. 51 - 9203100 - 001.

M1 .B6.10.0015 1RPV-449-02-01 NC 03/31/13 CLR N N N VT-13-868 M1.B6.10.0016 1RPV-449-02-02 NC 03/31/13 REC N N N VT- 13-882 Rejectable condition found acceptable for continued service. Reference PIP M 03682.

M1.B6.10.0017 1RPV-449-02-03 NC 03/31/13 CLR N N N VT-13-869 M1,B6.10.0018 1RPV-449-02-04 NC 03/31/13 CLR N N N VT-13-870 M1,B6.10.0019 1RPV-449-02-05 NC 03/31/13 CLA N N N VT-13-871 M1.B6.10.0020 1RPV-449-02-06 NC 03/31/13 REC N N N VT-13-883 Rejectable condition found acceptable for continued service. Reference PIP M 03681.

M1.16.10.0021 1RPV-449-02-07 NC 03/31/13 CLA N N N VT-13-872 M1.B6.10.0022 1RPV-449-02-08 NC 03/31/13 CLR N N N VT-13-873 M1..B6.100.0001 1SGA-MW-X2-Y1 NC 03/29/13 REC N N N VT-13-865 Rejectable conditions found acceptable for continued service. Reference PIP M-13-03552 and PIP M-13-03553.

Printed 7/17/2013 10:05:00 AM jec5908 v.01/01/08 SDQA Cat "C, McGuire 1 7/17/2013 10:03:00 AM Page 2 of20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1. B6.-100.0002 1SGA-MW-X2-Y2 NC 03/29/13 CLR N N N VT- 13-859 Ml.B6,100.0003 1SGB-MW-X1-Y1 NC 03/29/13 CLR N N N VT- 13-861 M1 .B6.100.0004 1SGB-MW-X1-Y2 NC 03/29/13 CLR N N N VT- 13-858 M1.B6.100.0005 1SGC-MW-X2-Y1 NC 03/29/13 CLR N N VT-1 3-860 M1 .B6.100.0006 1SGC-MW-X2-Y2 NC 03/29/13 CLR N N VT-1 3-862 M1 .B6.100.0007 1SGD-MW-Xi-Yi NC 03/29/13 CLR N N VT- 13-863 M1..B6.100.0008 1SGD-MW-X1-Y2 NC 03/29/13 CLR N N VT- 13-864 M1.B6.180.0003 1RCP-1A-F NC 03/20/13 CLR N N UT-1 3-320 M1.16.30.0001 1RPV-449-01-04 NC 03/31/13 CLR N N UT-13-346 (Page 1)

NC 03/31/13 CLR N N UT-13-346 (Page 2)

M1.B6.30.0010 1RPV-449-01-05 NC 03/31/13 CLR N N N UT-13-347 (Page 1)

NC 03/31/13 CLR N N N UT-13-347 (Page 2)

M1.B6.30.0011 1RPV-449-01-06 NC 03/31/13 CLR N N N UT-13-348 (Page 1)

NC 03/31/13 CLR N N N UT-13-348 (Page 2)

M1.B6.30.0012 1RPV-449-01-07 NC 03/31/13 CLR N N N UT-13-349 (Page 1)

Printed 7/17/2013 10:05:00 AM jec59O8 v. 01/01/08 SDOA Cat "C" McGuire 1 7/17/2013 10:03:00AM Page 3 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .B6.30.0012 1RPV-449-01-07 NC 03/31/13 CLR N N N UT-13-349 (Page 2)

M1.B6.30.0013 1RPV-449-01-01 NC 03/31/13 CLR N N N UT-13-350 (Page 1)

NC 03/31/13 CLA N N N UT-13-350 (Page 2)

M13.6.30.0014 1RPV-449-01-02 NC 03/31/13 CLR N N N UT-13-351 (Page 1)

NC 03/31/13 CLA N N N UT-13-351 (Page 2)

M1.B6.30.0015 1RPV-449-01-03 NC 03/31/13 CLR N N N UT-13-352 (Page 1)

NC 03/31/13 CLR N N N UT-13-352 (Page 2)

M1 .86.30.0032 1RPV-449-01-08 NC 03/31/13 CLR N N N UT-13-353 (Page 1)

NC 03/31/13 CLR N N N UT-13-353 (Page 2)

M1.B6.30.0033 1RPV-449-01-09 NC 03/31/13 CLR N N N UT-13-354 (Page 1)

NC 03/31/13 CLR N N N UT-13-354 (Page 2)

M1.B6.30.0034 1RPV-449-01-10 NC 03/31/13 CLR N N N UT-13-355 (Page 1)

NC 03/31/13 CLR N N N UT-13-355 (Page 2)

M1.B6.30.0035 1RPV-449-01-11 NC 03/31/13 CLR N N N UT-13-356 (Page 1)

NC 03/31113 CLR N N N UT-13-356 (Page 2)

M1.B6.30.0036 1RPV-449-01-12 NC 03/31/13 CLR N N N UT-13-357 (Page 1)

Printed 7/17/2013 10:05:00 AM jec59O8 v. OV01108 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 4 of 20

Inspection Results For 1EOC22 insp mnsp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .B6.30.0036 1RPV-449-01-12 NC 03/31/13 CLR N N N UT-13-357 (Page 2)

M1 .B6.50.0013 1RPV-449-03-01 NC 03/31/13 CLR N N N VT-13-874 MI .B6.50.0014 1RPV-449-03-02 NC 03/31/13 REC N N N VT-13-881 Rejectable condition found acceptable for continued service. Reference PIP M 03682.

M1 .86.50.0015 1RPV-449-03-03 NC 03/31/13 CLR N N N VT- 13-875 M1 .16.50.0016 1RPV-449-03-04 NC 03/31/13 CLR N N N VT- 13-876 M1.B6.50.0017 1RPV-449-03-05 NC 03/31/13 CLR N N N VT- 13-877 M1 .B6.50.0018 1RPV-449-03-06 NC 03/31/13 CLR N N N VT- 13-878 M1.B6.50.0019 1RPV-449-03-07 NC 03/31/13 CLR N N N VT-13-879 M1 .B6.50.0020 1R PV-449-03-08 NC 03/31/13 CLR N N N VT- 13-880 M1 .66.90.0001 1SGA-MW-X2-Y1 NC 04/04/13 CLR N N N UT-13-361 (Page 1)

This examination was performed in 1EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken In 1EOC22 toward meeting Examination Category B-G-1 4th Interval requirements.

NC 03/04/13 CLR N N N UT-13-361 (Page 2)

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDOA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 5 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .B6.90.0002 1SGA-MW-X2-Y2 NC 04/04/13 CLR N N N UT-13-362 (Page 1)

This examination was performed in 1 EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1 EOC22 toward meeting Examination Category B-G-1 4th Interval requirements.

NC 03/04/13 CLR N N N UT-13-362 (Page 2)

M1 .16.90.0003 1SGB-MW-X1-Y1 NC 04/07/13 CLR N N N UT-13-365 (Page 1)

This examination was performed in 1 EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1EOC22 toward meeting Examination Category B-G-1 4th Interval requirements.

NC 04/07/13 CLR N N N UT-13-365 (Page 2)

M1 .16.90.0004 1SGB-MW-Xl-Y2 NC 04/07/13 CLR N N N UT-13-366 (Page 1)

This examination was performed in 1 EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1 EOC22 toward meeting Examination Category B-G-1 4th interval requirements.

NC 04/07/13 CLR N N N UT-13-366 (Page 2)

M1.B6.90.0005 1SGC-MW-X2-Y1 NC 04/07/13 CLR N N N UT-13-367 (Page 1)

This examination was performed in 1EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1EOC22 toward meeting Examination Category B-G-1 4th Interval requirements.

NC 04/07/13 CLR N N N UT-13-367 (Page 2)

M1.B6.90.0006 1SGC-MW-X2-Y2 NC 04/07/13 CLR N N N UT-13-368 (Page 1)

This examination was performed in 1EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1 EOC22 toward meeting Examination Category B-G-1 4th Interval requirements.

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 6 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .B6.90.0006 1SGC-MW-X2-Y2 NC 04/07/13 CLR N N N UT-13-368 (Page 2)

M1.B6.90.0007 1SGD-MW-X1-Y1 NC 04/04/13 CLR N N N UT-13-363 (Page 1)

This examination was performed in 1EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1EOC22 toward meeting Examination Category B-G-1 4th interval requirements.

NC 03/04/13 CLR N N N UT-13-363 (Page 2)

M1.B6.90.0008 1SGD-MW-Xl-Y2 NC 04/04/13 CLR N N N UT-13-364 (Page 1)

This examination was performed in 1EOC22 to complete Examination Category B-G-1 3rd Interval requirements. Reference Request For Relief 10-MN-002. No credit will be taken in 1 EOC22 toward meeting Examination Category B-G-1 4th Interval requirements.

NC 03/04/13 CLR N N N UT-13-364 (Page 2)

M1.B9.11.0085 1NC1F1705 NC 03/23/13 CLR N N N UT-13-333 (Page 1)

NC 03/23/13 CLR N N N UT-13-333 (Page 2)

NC 03/23113 CLR N N N UT-13-333 (Page 3)

M1.B9.11.0086 1NC1F1707 NC 03/23/13 CLR N N N UT-13-334 (Page 1)

NC 03/23/13 CLR N N N UT-13-334 (Page 2)

NC 03/23/13 CLR N N N UT-13-334 (Page 3)

M1.B9. 11.0110 1NC128-2 NC 03/22/13 CLR N N N UT-13-331 (Page 1)

NC 03/22/13 CLR N N N UT-13-331 (Page 2)

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDOA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 7 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1.B9.11.0110 1NC128-2 NC 03/22/13 CLR N N N UT-13-331 (Page 3)

M1.B9.11.0111 1NC-128-1 NC 03/22/13 CLR N N N UT-13-332 (Page 1)

NC 03/22/13 CLR N N N UT-13-332 (Page 2)

NC 03/22/13 CLR N N N UT-13-332 (Page 3)

M1.B9.11.0112 1NC-102-2 NC 03/22/13 CLR N N N UT-13-328 (Page 1)

NC 03/22/13 CLR N N N UT-13-328 (Page 2)

NC 03/22/13 CLR N N N UT-13-328 (Page 3)

M1.19.11.0113 1NC-102-1 NC 03/22/13 CLR N N N UT-13-329 (Page 1)

NC 03/22/13 CLR N N N UT-13-329 (Page 2)

NC 03/22/13 CLR N N N UT-13-329 (Page 3)

M1.B9.11.0169 1NC-102-9 NC 03/22/13 CLR N N N UT-13-330 (Page 1)

NC 03/22/13 CLR N N N UT-13-330 (Page 2)

NC 03/22/13 CLR N N N UT-13-330 (Page 3)

M1.19.11.0175 1NC1F-1739 NC 03/18/13 CLA N N N UT-13-314 (Page 1)

NC 03/18/13 CLR N N N UT-13-314 (Page 2)

NC 03/18/13 CLR N N N UT-13-314 (Page 3)

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDOA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page8 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .B9.11.0198 1N1451-1 NI 03/21/13 CLR N N N UT-13-323 (Page 1)

NI 03/21/13 CLR N N N UT-13-323 (Page 2)

NI 03/21/13 CLR N N N UT-13-323 (Page 3)

M1.19.11.0338 1N1451-4 NI 03/21/13 CLR N N N UT-13-324 (Page 1)

NI 03/21/13 CLA N N N UT-13-324 (Page 2)

NI 03/21/13 CLR N N N UT-13-324 (Page 3)

M1.C1.10.0001 1RHR-1A-3-4 ND 04/01/13 CLR N N N VT-NA Examined under PT Zone # 1ND-019L-B(Reference WO# 2044364).

M1.C1.20.0001 5141-3-HD1 NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1.C1.20.0002 5141-3-HD2 NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1.C1.20.0010 1SGD-W144 CF 03/24/13 CLR N N N UT-13-336 (Page 1)

CF 03/24/13 CLR N N N UT-13-336 (Page 2)

CF 03/24/13 CLR N N N UT-13-336 (Page 3)

CF 03/24/13 CLR N N N UT-13-337 MI .C1.20.0011 1RHR-1A-2-3 ND 04/01/13 CLR N N N VT-NA Examined under PT Zone # 1NV-019L-B(Reference WO# 2044364).

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 9 of 20

Inspection Results For 1EOC22 Insp asp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 Cl.20.0012 5141-1-HO1 NV 04/20113 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365)

M1,C1.20.0013 5141-1-HD2 NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1,C1.20.0014 5141-2-HD1 NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1,C1.20.0015 5141-2-HD2 NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1.C1.30.0001 1SGA-W65 CF 03/20/13 CLR Y N N UT-13-318 (Page 1)

Percent of coverage obtained greater than 90%.

CF 03/20/13 CLR N N N UT-1 3-318 (Page 2)

Percent of coverage obtained greater than 90%.

CF 03/20/13 CLR N N N UT-13-318 (Page 3)

Percent of coverage obtained greater than 90%.

CF 03/20/13 CLR N N N UT-13-318 (Page 4)

Percent of coverage obtained greater than 90%.

CF 03/20/13 CLR N N N UT-13-319 Percent of coverage obtained greater than 90%.

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 10 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment Ml.C1.30.0006 5141-1-NB-TS NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1.C1.30.0007 5141-1-TS-SH NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1 .C1.30.0008 5141-2-NB-TS NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1,C1.30.0009 5141-2-TS-SH NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1,C1.30.0010 5141-3-NB-TS NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1,C1.30.0011 5141-3-TS-SH NV 04/20/13 CLR N N N VT-NA Examined under PT Zone # 1NV-018L-B(Reference WO# 2044365).

M1.C2.33.0001 1RHR-1A-INLET ND 04/01/13 CLR N N N VT-NA Examined under PT Zone # 1ND-019L-B(Reference WO# 2044364).

M1.C2.33.0002 1RHR-1A-OUTLET ND 04/01/13 CLR N N N VT-NA Examined under PT Zone # 1NV-019L-B(Reference WO# 2044364).

M1.C3.30.0001 1CCPUMP-1A-LEG NV 03/27/13 CLR N N N PT-13-054 Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C", McGuire 1 7/17/2013 10:03:00 AM Page 11 of 20

Inspection Results For 1EOC22 Insp Inop Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment Ml.05.11.0787 1N1201-6 NI 03/20/13 CLR UT-13-325 (Page 1)

NI 03/20/13 CLR UT-13-325 (Page 2)

NI 03/20/13 OLR UT-13-325 (Page 3)

Ml .C6.20.0003 1CF-1268-1 CF 03/23/13 OLR MT- 13-067 M1 .C6.20.0017 1CF-26-1 CF 03/23/13 OLA MT- 13-066 M1.D1.10.0008 1KCHX-SUPPORT-lA KC 03/07/13 CLFI VT- 13-823 M1.D1.10.0009 1KCST-SUPPORT-1A KC 03/04/13 CLA VT- 13-803 Ml.Fl.10.0001 1-MCR-NC-500 NC 03/21/13 OLR VT-i13-844 Mi.F1.10.0003 1-MCR-NC-506 NC 03/21/13 CLR VT- 13-842 Ml.Fl.10.0004 1-MCR-NC-507 NC 03/21/13 CILR VT- 13-843 Ml.Fl.10.0026 1-MCR-ND-500 ND 03/21/13 REC VT- 13-845 Rejectable condition found acceptable. Reference PIP M-13-02986.

M1.Fl.10.0032 1-MCR-NI-515 NI 03/21/13 REC N N N VT- 13-850 Rejectable condition found acceptable. Reference PIP M-13-02990.

Mi.F1.10.0033 1-MCR-NI-521 NI 03/21/13 CLR N N N VT-1 3-846 Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 12 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1.F1.10.0035 1-MCR-NI-528 NI 03/21/13 REC N N N VT-13-849 Rejectable condition found acceptable for continued service. Reference PIP M 02989.

M1.Fl.10.0066 1-MCR-NV-1291 NV 03/21/13 CLR N N N VT-13-848 M1.F1.10.0067 1-MCR-NV-1292 NV 03/21/13 REC N N N VT-13-851 Rejectable condition found acceptable for continued service. Reference PIP M 02992.

M1.F1.20.0076 1-MCR-NI-676 NI 03/21/13 CLR N N N VT-13-847 M1.F1.20.0077 1-MCR-NI-685 NI 03/21/13 CLR N N N VT-13-852 M1.F1.20.0394 1-MCA-ND-H69 ND 02/28/13 CLR N N N VT-13-811 M1.F1.20.0617 1-MCA-NV-H461 NV 02/26/13 CLR N N N VT-13-815 M1.F1.20.0658 1-MCA-NV-H611 NV 03/25/13 CLR N N N VT-13-853 M1.F1.20.0673 1-MCA-NV-H708 NV 02/26/13 CLR N N N VT-13-819 M1.F1.20.1182 I-MCA-ND-H84 ND 03/11/13 CLR N N N VT-13-826 M1.F1.20.1199 1-MCA-NI-H5 Ni 02/26/13 CLR N N N VT-13-818 M1.F1.20.1200 1-MCA-NI-H6 NI 02/26/13 CLR N N N VT-13-821 M1.F1.20.1203 1-MCA-NS-H2 NS 02/26/13 CLR N N N VT-13-817 Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDOA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 13 of 20

Inspection Results For 1E0C22 Inap Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment Ml.Fl.20.1208 1-MCA-ND-H17 ND 03/04/13 CLR N N N VT- 13-805 Ml.F1.20.1210 1-MCA-ND-H23 ND 03/12/13 CLR N N N VT- 13-836 M1.F1.20.1212 1-MCA-ND-H59 ND 03/11/13 CLR N N N VT- 13-825 M1 .F1,20.1215 1-MCA-ND-H76 ND 03/12/13 CLR N N N VT- 13-835 Ml.Fl.20.1223 1-MCA-CA-H426 CA 03/11/13 CLR N N N VT- 13-830 Ml.Fl.20.1283 1-MCA-NV-H6 NV 02/26/13 CLR N N N VT- 13-820 Ml.F1.20.1284 1-MCA-NV-H8 NV 02/26/13 CLR N N N VT- 13-814 Ml.Fl.20.1285 1-MCA-NV-H11 NV 02/26/13 CLR N N N VT-13-813 Ml.Fl.20.1286 1-MCA-NV-H12 NV 02/27/13 REC N N N VT- 13-822 Rejectable condition found acceptable for continued service. Reference PIP M 01937.

M1.F1.20.1287 1-MCA-NV-H13 NV 02/27/13 REC N N N VT-13-810 Rejectable condition found acceptable for continued service. Reference PIP M-1 3-01940.

Ml.Fl.20.1288 1-MCA-NV-H14 NV 02/25/13 CLR N N N VT-13-812 MI.F1.20.1317 1-MCA-SA-H19 SA 03/17/13 REC N N N VT-13-839 Rejectable condition found acceptable for continued service. Reference PIP M 02625.

Printed 7/17/2013 10:05:01 AM jec59O8 v. 01/01/08 SDQA cat "c", McGuire 1 7/17/2013 10:03:00 AM Page 14 of 20

Inspection Results For 1EOC22 Insp lnsp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1.Fl.20.1348 1-MCA-SV-H 17 SV 03/17/13 REC N N N VT-13-838 Rejectable condition found acceptable for continued service. Reference PIP M 02623.

Ml.F1.20.1350 1-MCA-VQ-H 10 VQ 03/11/13 CLR N N N VT-13-829 M1.Fl.20.1401 1-MCA-SM-H 184 SM 03/11/13 CLR N N N VT- 13-832 Ml .Fl.30.0053 1-MCA-KC-1091 KC 03/04/13 CLR N N N VT- 13-808 M1.F1 .30.0065 1-MCA-KC-1090 KC 03/04/13 CLR N N N VT-13-806 M 1.F 1.30.0066 1-MCA-KC-2190 KC 03/04/13 CLR N N N VT-13-807 Ml.Fl.30.0088 1-MCA-RN-H979 RN 03/13/13 CLR N N N VT-13-837 Ml.Fl.30.0089 1-MCA-RN-2024 RN 02/26/13 CLR N N N VT-13-816 Ml.Fl.30.0090 1-MCA-RN-2330 RN 03/11/13 CLR N N N VT- 13-834 Ml .Fl.30.0649 1-MCA-RN-1260 RN 03/11/13 CLR N N N VT-13-831 Ml .Fl.30.0761 1-MCA-RN-2240 RN 03/11/13 CLR N N N VT-13-833 Ml .Fl.30.0948 1-MCA-RN-H937 RN 02/28/13 REC N N N VT-13-809 Rejectable condition found acceptable for continued service. Reference PIP M 02012.

M1.F1.30.1122 l-MCA-CA-H346 CA 03/11/13 CLR N N N VT-13-828 Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 15 of 20

Inspection Results For 1EOC22 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1 .Fl.30.1123 1-MCA-CA-H347 CA 03/11/13 CLR N N N VT-13-827 M1.F1.40.0067 1KCST-SUPPORT-1A KC 03/04/13 CLR N N N VT-13-802 M1.Fl.40.0068 1KCP-SUPPORT-lAl KC 03/04/13 CLR N N N VT-13-801 Ml.F1.40.0069 1KCHX-SUPPORT-lA KC 03/07/13 CLR N N N VT-13-824 Ml.Fl.40.0106 1CRAP-SUPPORT-1 YC 03/04/13 CLR N N N VT-13-804 M1.G10.1.0001 1RPV1-462C-SE NC 03/29/13 CLR N N N UT-13-313 (Page 1)

NC 03/29/13 CLR N N N UT-13-313 (Page 2)

NC 03/29/13 CLR N N N UT-13-313 (Page 3)

NC 03/29/13 CLR N N N UT-13-313 (Page 4)

NC 03/29/13 CLR N N N UT-13-313 (Page 5)

M1.G10.1.0002 1RPV1-462B-SE NC 03/29/13 CLR N N N UT-13-358 (Page 1)

NC 03/29/13 CLR N N N UT-13-358 (Page 2)

NC 03/29/13 CLR N N N UT-13-358 (Page 3)

NC 03/29/13 CLR N N N UT-13-358 (Page 4)

NC 03/29/13 CLR N N N UT-13-358 (Page 5)

M1.G10.1.0003 1RPV1-462A-SE NC 03/29/13 CLR N N N UT-13-359 (Page 1)

Printed 7/17/2013 10:05:01 AM jec59O8 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 16 of 20

Inspection Results For 1EOC22 Inap Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1.G10.1.0003 1RPV1-462A-SE NC 03/29/13 CLR N N N UT-13-359 (Page 2)

NC 03/29/13 CLR N N N UT-13-359 (Page 3)

NC 03/29/13 CLR N N N UT-13-359 (Page 4)

NC 03/29/13 CLR N N N UT-13-359 (Page 5)

M1.G10.1.0004 1RPV1-462D-SE NC 03/29/13 CLR N N N UT-13-360 (Page 1)

NC 03/29/13 CLR N N N UT-13-360 (Page 2)

NC 03/29/13 CLR N N N UT-13-360 (Page 3)

NC 03/29/13 CLR N N N UT-13-360 (Page 4)

NC 03/29/13 CLR N N N UT-13-360 (Page 5)

M1.G10.1,0005 1NI1FW38-1 NC 03/29/13 CLR N Y N UT-13-341 (Page 1)

NC 03/29/13 CLR N N N UT-13-341 (Page 2)

NC 03/29/13 CLR N Y N UT-13-341 (Page 3)

NC 03/29/13 CLR N N N UT-13-341 (Page 4)

M1.G10.1.0006 1NI 1FW38-2 NC 03/29/13 CLR N N N UT-13-343 (Page 1)

NC 03/29/13 CLR N N N UT-13-343 (Page 2)

NC 03/29/13 CLR N N N UT-13-343 (Page 3)

NC 03/29/13 CLR N N N UT-13-343 (Page 4)

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C"1 McGuire 1 7/17/2013 10:03:00 AM Page 17 of 20

Inspection Results For 1EOC22 Insp Inap Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M1.G10.1.0007 1NIIFW38-3 NC 03/29/13 CLR N N N UT-13-344 (Page 1)

NC 03/29/13 CLR N N N UT-13-344 (Page 2)

NC 03/29/13 CLR N N N UT-13-344 (Page 3)

NC 03/29/13 CLR N N N UT-13-344 (Page 4)

M1.G10.1.0008 1NI1FW38-4 NC 03/29/13 CLR N N N UT-13-345 (Page 1)

NC 03/29/13 CLA N N N UT-13-345 (Page 2)

NC 03/29/13 CLR N N N UT-13-345 (Page 3)

NC 03/29/13 CLR N N N UT-13-345 (Page 4)

M1.G14.1.0001 Cold Leg 1D Nozzle 4-1 NC 03/30/13 CLR N N N UT-13-342 (Page 1)

NC 03/30/13 CLR N N N UT-13-342 (Page 2)

M1.G14.1.0002 Crossover Leg 1A Nozzle 1- NC 03/29/13 CLR N N N UT-13-338 (Page 1) 6 NC 03/29/13 CLR N N N UT-13-338 (Page 2)

M1.G14.1.0003 Cold Leg 1D Nozzle 4-5 NC 03/29/13 CLR N N N UT-13-339 (Page 1)

NC 03/29/13 CLR N N N UT-13-339 (Page 2)

M1.G14.1.0004 Cold Leg 1A Nozzle 1-3 NC 03/29/13 CLR N N N UT-13-340 (Page 1)

NC 03/29/13 CLR N N N UT-13-340 (Page 2)

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDOA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 18 of 20

Inspection Results For 1EOC22 Insp mnsp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment Ml .G5.3.0001 1RPV3-445E-SE NC 04/03/13 CLR N N N WDI-PJF-1309082-FSR-001 Reference WESDYNE McGuire Unit 1 Reactor Vessel Outlet Nozzle Inspection Report No. WDI-PJF-1309082-FSR-001.

M1.G5.3,0002 1RPV3-445F-SE NC 04/03/13 CLR N N N WDI-PJF-1309082-FSR-001 Reference WESDYNE McGuire Unit 1 Reactor Vessel Outlet Nozzle Inspection Report No. WDI-PJF-1309082-FSR-001.

M1.G5.3.0003 1RPV3-445G-SE NC 04/03/13 CLR N N N WDI-PJF-1309082-FSR-001 Reference WESDYNE McGuire Unit 1 Reactor Vessel Outlet Nozzle Inspection Report No. WDI-PJF-1309082-FSR-001.

M1.G5.3.0004 1RPV3-445H-SE NC 04/03/13 CLR N N N WDI-PJF-1309082-FSR-001 Reference WESDYNE McGuire Unit 1 Reactor Vessel Outlet Nozzle Inspection Report No. WDI-PJF-1309082-FSR-001.

M1.G6.2.0001 1PZR-MANWAY NC 03/19/13 CLR N N N VT-13-841 M1.R1.11.0044 1NC91-2 NC 03/20/13 CLR N N N UT-13-326 (Page 1)

NC 03/20/13 CLR N N N UT-13-326 (Page 2)

M1.R1.11.0297 1NC1F1744 NC 03/18/13 CLR N N N UT-13-315 (Page 1)

NC 03/18/13 CLR N N N UT-13-315 (Page 2)

NC 03/18/13 CLA N N N UT-13-315 (Page 3)

M1.R1.11.0298 1NC1F1745 NC 03/18/13 CLR N N N UT-13-316 (Page 1)

NC 03/18/13 CLR N N N UT-13-316 (Page 2)

Printed 7/17/2013 10:05:01 AM jec5908 v. 01/01/08 SDQA Cat "C" McGuire 1 7/17/2013 10:03:00 AM Page 19 of 20

Inspection Results For 1EOC22 Insp Insp Insp Gee Summary No Component ID System Date Status Limited Ref RFR Comment M1.R1.1 1.0566 1NC91-1 NC 03/20/13 CLR N N N UT-13-327 (Page 1)

NC 03/20/13 CLR N N N UT-13-327 (Page 2)

NC 03/20/13 CLR N N N UT-13-327 (Page 3)

M1.R1.11.0575 1NCP333-1 NC 03/19/13 CLR N N N UT-13-317 (Page 1)

NC 03/19/13 CLR N N N UT-13-317 (Page 2)

NC 03/19/13 CLR N N N UT-13-317 (Page 3)

M1.R1.11.0576 1NCP334-1 NC 03/19/13 CLA N N N UT-13-321 (Page 1)

NC 03/19/13 CLR N N N UT-13-321 (Page 2)

NC 03/19/13 CLR N N N UT-13-321 (Page 3)

M1.R1.11.0577 1NCP334-2 NC 03/19/13 CLR N N N UT-13-322 (Page 1)

NC 03/19/13 CLA N N N UT-13-322 (Page 2)

NC 03/19/13 CLR N N N UT-13-322 (Page 3)

M1.R1.11.2434 1NVFW53-64 NV 03/26/13 CLR N N N UT-13-335 (Page 1)

NV 03/26/13 CLR N N N UT-13-335 (Page 2)

NV 03/26/13 CLR N N N UT-13-335 (Page 3)

NV 03/26/13 CLR N N N UT-13-335 (Page 4)

Printed 711712013 10:05:01 AM jec5908 v. 01101108 SDOA Cat ,c,, McGuire 1 7/17/2013 10:03:00 AM Page20 of 20

5.0 Owner's Report for Repair/ ReplacementActivities As required by the applicable code, records of Class I and Class 2 Repair and Replacement work are included on NIS-2 forms in this section. Attachment A lists the NIS-2 Forms that were completed during 1EOC22.

The NIS-2 forms included in this section were completed for work performed during this report period.

No items were determined to have work performed outside this report period.

The individual work request documents and manufacturers' data reports are on file at McGuire Nuclear Station.

5.1 Class I and 2 Preservice Examinations As required by the applicable code, Preservice Inspection (PSI) Examinations were performed on ISI Class I and 2 items during this report period. PSI examination data for items examined during 1EOC22 are filed with the work order and can be viewed in NEDL Portal.

Outage 1/EOC 22 Refueling Outage Report Page 1 of 1 McGuire Unit 1 Revision 0 Section 5 - Fourth Ten-Year Interval July 10, 2013

1E0C22 NIS2's Work Order# Task Class Description of work 589603 5 B Replaced piping and valve 1KC412 591190 1 B Replaced snubber and it's bolting material on hanger 1MCA-NI-315 592069 1 B Replaced valve 1BB7 II 1 1 592069 17 B Replaced hanger 1MCR-BB-509 after cutting it down as an interference issue.

1849473 6 B Welded item 2 to item 2 to replace hanger 1MCR-S-NV-100-2-X 1849473 1 B Replaced valve 1NV93 1879317 1 B Replaced plate (disc) in valve 1FW5 1922372 1 B Replaced snubber on hanger 1MCR-VQ-508 1922376 1 B Replaced snubber on hanger 1MCR-S-VE-100-01-G 1922380 1 A Replaced snubber and it's bolting material on hanger 1MCR-NV-1067 1922381 1 A Replaced snubber and it's bolting material on hanger 1MCR-NV-1064 1922382 1 A Replaced snubber on hanger 1MCR-NI-588 1922383 1 B Replaced snubber on hanger 1MCR-NI-584 +

1922386 1 B Replaced snubber and it's bolting material on hanger 1MCR-NI-526 1922392 1 A Replaced snubber on hanger 1MCR-NC-564 1922393 1 A Replaced snubber on hanger 1MCR-NC-554 1922570 1 B Replaced snubbers on hanger 1MCA-SM-145 1928909 6 B Replaced valve 1WG254 ang piping 1932305 1 B Replaced valve 1ND64 per EC102978 1948970 5 B Removed a portion of item I and 2 on hanger 1MCR-NV-568 per EC103109 1956812 1 B Replaced disc in valve 1NV459 1957489 7 B Replaced valve iN152 1957490 6 B Replaced valve 1NI63 1957491 6 B Replaced valve 1N174 1957492 6 B Replaced valve 1N186 1981590 11 B Replaced valve 1WG238 and piping 2003909 1 B Replaced flange, bolting material, and weld at discharge of the PD pump per W/O 1952614-39 2005580 1 B Replaced pipe clamp on hanger 1MCR-S-VI-100-01-Q_

2007130 1 B Replaced wedge in valve 1SV25 2007131 1 B Replaced plug in valve 1SV1 2007506 1 B Replaced plug in valve 1SV13 2011716 1 B Replaced bolting material in the baby to bonnet on valve 1ND30 2026124 8 B Replaced valve 1NV491 and it's piping per EC110428 I

1E0C22 NIS2's 2034426 21 B Replaced pivot pin on hanger 1MCA-SM-141 I "

2034426 43 B Replaced bolting material on hanger 1MCR-NV-954 ant snubber 2034834 17 B Replaced manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC101520 2034835 17 B Replaced manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC101520 2034836 17 B Replaced manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC101520 2034838 17 B Replaced manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC101520 2035065 2 B Replaced control valves 5 & 5 in S/G IA lateral support "southern snubber" 2039111 3 A Replaced disc and bolting material in valve 1N160.

2039899 2 B Replaced valve 1NV6 __II 2039905 6 B Replaced stud and nuts in the pipe clamp on hanger 1MCA-SV-17 2039906 6 B Replaced rod and nuts on hanger 1MCA-SA-19 2039923 6 A Modified item number 8 on hanger 1MCR-ND-500 2042399 1 B Replaced disc in valve 1NV1002 2045621 2 B Replaced disc in valve 1KC344 2045641 4 B Replaced disc and bonnet on valve 1SM95 2046263 6 A Replaced valve 1NC2 1 _ _

2054451 9 B Replaced items 1 and 4 on hanger 1MCR-NV-1261 per EC103109 2064076 1 B Replaced disc in valve 1NV29 1 1 2064077 11 B Replaced valve 1NV45 and the piping around it.

2064077 23 B Modified hanger 1MCR-NV-1265 per EC109922 2064078 5 B Rewelded support strap to hanger 1MCR-NV-825 2064078 13 B Replaced valve 1NV61 and it's piping 2064078 17 B Rewelded hanger 1MCR-NV-826 2064079 1 B Replaced disc in valve 1NV77 2077097 5 B Replaced valve 1NV46 and the piping around it per EC110469 2081817 1 B Replaced snubber and it's bolting material on hanger 1MCA-NI-249 2082255 1 A Replaced snubber on hanger 1MCR-NI-658 2082257 1 B Replaced snubber on hanger 1MCR-BB-662 2082695 2 B Replaced valve 1NV229 2088039 1 B Replaced snubber on hanger 1MCA-SV-6 2088932 1 B Replaced snubber on hanger 1MCA-NV-215 2089158 1 B Replaced snubber on hanger 1MCR-NV-874 2089186 1 B Replaced disc and the bolting material in valve 1ND56 2089513 1 A Removed internals of original valve (*1NI160, renamed 1N1887) and installed a new valve 1NI160 per EC110415 j'C, z0ý

1EOC22 NIS2's 2089589 1 B Replaced snubber and it's bolting material on hanger 1MCA-SV-1 2091040 1 B Replaced snubber on hanger 1MCR-CA-443

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl

1. Owner Duke Enermv Carolinas. LLC.Date ' ~~Date :/12/2013 4/221 526 South Church Street. Charlotte. NC. 28201 Shed -of 2I-- i " :

Address

2. Plant McGuire Nuclear Station Unit I Name 12700 HaUers Ferry Road. Huntersmille, NC 28078 589603-05.

. . . . . .. . . . . . .. iI."

Address Work Order # (or Repir/Replaeemet Organizaon P.O. No.,JoblNo., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code Symbol Stamp: ';!A:

Authorization No.: .w/A 526 South Church Street. Charlotte. NC 282"1-1006 A .

Address Expiration Date:. ""

4. Identification of System r C - Component Cooling System 7- 1.

5. (a) Applicable Construction Code. ASME III 19.. Edition, ,Sumaer and IWinter Addenda, ,NIA Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and.2000-Ad da

_____.....

(c) Applicable Section X3 Code Case(s) 'N/A

6. Identification of Corn nents __.... __._... ....

Co"-ecte,. ASME Code Name of Mamafactun National other yearImoledY or S Ome Component Name of Manufacturer Seral No. Board No. Idenification Built Intled (Yes or No) 1KC412 Kerotest TD2-3 -- 8577 - . N/A "7 -e mo KC412 BW/IP T97EP0306 NN/A -/A -7j1 1 9 i i T' - 8 IN/A ... Yes:.

KC System 'Duke Energy WN/A 138 N/A Hl9.

or"et I__ . Yes I :

I Te-t-Temp.

7. Description of Work Renlaced Comoo0nent/ YPar/A90tMne .. .. *..%""

Additional Description ielcdpiping and valve 1KC412 . ..

8. Tests Conducted: Hydrostatic r Pneumatic . Nominal.Operation Pressure F0 Exempt E[ Other rl Pressure TestTep.

Description (Optional): "

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet .L of 1 Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCF4I-lKC12 and 124 Flow Diagram No(s).: 'MCD-_1573_03.00 Support/Restraint Sketch/Drawing No(s).: ;N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A . Expiration Date II..IA Signed ýFL Grass, Quality Assurance Technical Specialist Date April 12 , 20113 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Insectors and the State or Province of North Carolina and employed by 54 0 Steam Boiler Inspection & Insurance Company off Connecticut have inspected the components described in this Owner's Report during the period

""L- -- to -- /, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's R ort. Furthermore, neither the Inspec nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or c ected with this inspection.

JFSwan .Commissions iNBI 1473-NC 1524, N-I ospector's Signature National Board, State, Province, and Endorsnments Date 3

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerev Carolinas. LI C . .Date 1/12/2012 2

S~'I~i ~oiith Chirr~h Stree~t ICharlotte, 526 South Chrch Sree NC, 28201 Sheet 1 of

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road, Huntersville, NC 28078 591190-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: - . . = . . ..

Authorization No.:

526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date:.

4. Identification of System NI - Safety Injection

5. (a) Applicable Construction Code ASME III 19.71 Edition, Summer and Winter Addenda, ýN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edtition with the 1999 and 2000 Addenda ition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Components Corrected, ASME Code.

Name of Manufacturer National Other Year . Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

I MCA-NI-315 Duke Energy 20970 N/A N/A N/A Removed No IMCA-NI-315 Duke Energy 38439 N/A N/A :N/A Installed No

7. Description of Work Replaced Component/Part/Appurtenance Additional Description R ,placed snubber and it's bolting material on hanger IMCA-NI-3 15

8. Tests Conducted: Hydrostatic r Pneumatic F" Nominal Operation Pressure i- Exempt FW Other 1" Pressure PSI Test Temp.

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 2

9. Remarks (Should Include the Following Information, as Applicable): Sheet of 2 Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1562-04.00 Support/Restraint Sketch/Drawing No(s).: IMCA-NI-315 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: 'MCSRD-NIK-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify' that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date :N/A Signed FL Grass, Quality Assurance Technical Specialist , Date January 12 ,20 12 Owner or Owner's Designee. Title SI I .. " . .

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

.North Carolina , and employed by Hartford Steam Boiler Inspection and Insurance Compkny of I Connecticut

/to -/*

have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.

Swan, -Commissions -, NBI 1473-NC1524, N-I.

National Board, State, Province, and Endorsements Date 20

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X"

1. Owner nijkL,-. Fnpro' ** .*.

C~rgmlinn

..*,v.* M..

T LC Date 4/14/2013 ..

526 South Church Stret Charlotte, NC. 28201 2

, i wT-" .........-

T'-,fl r .... Sheet 1 of AAA.

2. Plant McGuire Nuclear Station Unit I Name ...

12700 Haeers Ferry Road. Huntersville. NC 28078 :592069-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: N/A Authorization No.: IN/A 526 South Church Street. Charlotte. NC 28201-1006 S. . '. iM/A Address Expiration Date:

4. Identification of System BB - Steam Generator Blowdown Recycle

5. (a) Applicable Construction Code ASME III . I 19.ZL Edition, ISummer and Winter i Addenda, :iN/. Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Con onents '_"

.. .. . [ Corrected, ASMECode Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification. Built ..Installed (Yes.or No) 1BB7 Borg Warner 9077 84 IV File# 822 j1976! Removed Yes IBB7 Flowserve *~ ~ ~ ~ ~~:;24BRW

~~~ ~~~~~~~~~

........ _. .... a...

.78I/. ...... . ... ..- . . . . .02IsaldYes

........ i/ ..... ....

7. Description of Work Reolaced CornoonentlP~arLAgnuteagce Additional Description Replaced valve lBB7

8. Tests Conducted: Hydrostatic r- Pneumatic F Nominal Operation Pressure F] -Exempt r-- Other C Pressure: PSI Test Temp.. L_ýF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIRREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): 2 2 Sheet of Component Line Size: .2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-IBB4 7&41- M i:~~ix 580 -6i200...... ~ ........

Flow Diagram No(s).: MCFD-.1580-01.00 .. .

Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XL Type Code Symbol Stamp N/A " "

Certificate of Authorization No. N/A Expiration.Date N/A Signed FL Grass, Quality Assurance Technical Specialist. ........................ Dt jApril 14 -,0ý.

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and PresureVessel Inspectors and the State or Province of North Carolina I_

and employed by 'Hartford Steam Boiler Inspection & Insurance Company iof Connecticut have insp~ected the components described in this Owner's Report during the period J~~to QJ zl ~and state that to the best of my knowledge and belief, the Owner has performed examinations .. and taken ..corrective measures described in this Owner's Report in accordance with the requirements of the ASUM Code, Section )a.'

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described.

in this Owner's Report. Furthermore, neither th lnpector nor his employer shall be liable in any manner for an-y personal injury or property damage. or a loss of any kind arising fo oneted with this inspection Commissions NIl7.Nl2,NI-IIrsp.ecs S0ignate aNational Board, State, Prtoirms and Endorsements Date N -,."

-I 20-LS

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner fluke Ftierov Csarnlinne T in C. Date 4/17/2013 Duke Fnercry rm 526 South Church Street_ Charlotte. NC. 28201 Sheet '1 of 2 Address

2. Plant SStation Unit .1 McGuire Nucleai Name 12700 Haeers Ferrv Road. Huntersville. NC 28078 '592069-17 ... .... . .. .... .. ... ...... .....

Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: N/A Authorization No.: .N/A ..

526 South ChurchStreet. Charlotte. NC 28201-1006 Address Expiration Date: N/A

4. Identification of System BB -

5. (a) Applicable Construction Code ASME I . 191L.. Edition, summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Co nents Correctd," ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacr Serial No. Board No. [deatification Built Installed (Yes or No)

IMCR-BB-509 DukeEnergy .N/ N/A -N/A 1CorrectedN S -............ .- - --

7. Description of WorkRelcdCmogrtPWApuena Additional Description :Replaced hanger IMCR-BB-509 after cutting it down as an interference issue.

8. Tests Conducted. Hydrostatic F Pneumatic r1 Nominal Operation Pressure C- Exempt IF' Other C7 Pressure PSI Test Temp.

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 2

9. Remarks (Should Include the Following Information, as Applicable): Sheet of' 2 '

Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: -N/A Flow Diagram No(s).: MCFD-1580-01.00 Support/Restraint Sketch/Drawing No(s).: lMcR-BB=509 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Report to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp :N/A Certificate of Authorization No. N/A Expiration Date 1N/A

. . . .. . . . . . .. ........ . . ... .. . i " " . . . . . . . . . . . . . .. . ....... ...... .. .. ...... ..

Signed FL Grass, Quaity Assurance Technical Speciahist Date AAPril 17 - ,20iL Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION.

1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North North Carolina

_________Carolina_________________-_ _"_ !and employed by

,Harto.rd St.. Boiler Inspection & Insurance Company. of Connecticut hav inspected the components described in this Owner's Report during the period

/.-....to -- Iz -§-, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the In~ ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. "..

JF Swan ".-..-. -t/**i24 iCommissionsn NBI1473-NCi524,N-I i National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY.

As Required by the.Provisions of the ASME Code SectionXI:

1. Owner Duke Energy Carolinas. LILC DAt /12013.

526 Sniith (hiirh qrppt Carotte. NC. 28201 Sheet 'l f 2-A~jIw~q

2. Plant McGuire Nuclear Station Uniti Nam 12700 Hapers Ferry Road. Huntersville. NC 28078 1849473-06 Address Work Order # (or Repair/Replacement Orgmiztion P.0 No.. Job No., etc.).

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code:Symbol Stamp:. IN Authorization.No.: .NI "' .. .

526 South Church Street. Charlotte. N 2.201-1006-- .. A. .*6..

Address Expiration Date: JI:.

4. Identification of System NV -Chemical and Volume Control

5. (a) Applicable Construction Code ASME mI I 1921L Edition,.Summer and WMater Addenda, -N/A Code Case.

(b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 ard'2000 Addenda (c) Applicable Section Xl Code Case(s) 'N/A ...

6. Identification of Components _.___...__....._______.______ _'__.____..___._....___...___.. .. ...

Corrected, ASMECode Name of Manufactr National Rthored or Stamped.

Component Name of Manufacturer Serial No. Board No. NO NV-100-2-X Duke Energy . N/A A N/A - 'N/A nstalled .Yes

l! ' :4

' . . ..' . ... .. . . . . . .. i.... . .. . . .. . . . . : * . .. .. .- ' . ... ... . .......- .. . . .... ... . . :. . . ." ": *. . .

7. Description of Work Repladed Com2ont/Part/relanehaM Additional Description :Welded item 2 to item 2 to replace hanger 1MCR-S-NV- 100-2-4

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure . Exempt'2* Other .. Pressure .PSI TestTmp. . 0 F

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY..

As Required by the Provisions of the ASME COde Seikon X:

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of*2L.....

Component Line Size: 4 in. (nominal) System Class: ASME Clas* 2..

Weld Isometric Drawing No(s).: N/A ,..

Flow Diagram No(s).: OMCFE..554-o-.6...

Support/Restraint Sketch/Drawing No(s).: -MCR-S-NV-100-2-X Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: .

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME-Code, Section XM.

IType Code Symbol Stamp ,N/A Certificate of Authorization No. ýN/A .. Expiration Date ~i FL Grass, Quality Assurance Technical Specialist ,

Owner or Owner's Designee, Title U - >- ,: " . > ' . .. . .. L i :.L :".. i. ." .

CERTIFICATEOF INSERVICE INSPECTION, I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesse i.ecitors and the State orProvice of--

North Carolina and employed by 'Hartford Steam Boiler Inspection.& Insurance Company o f.

Connecticut 'have inspected the components described in this Owner's Report during-the: period

-t " V-/ Z--*

--- -- -- "-and 3 state that to the best of my knowledge and belief, the Owner has perormied examinations and taken cor measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section X.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations.and corrective measures dscribed.

in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for:any personal.injury or property damage or a loss of any kind arising from rnnected with this inspection.

JF Swan - -- Commisio NB I1473"NC.1.524, KN-I National Board, State, Province, and Efidoteiments

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energv Carolinas. LLC Date *4/13/2013 526 South Church Street. Charlotte. NC. 28201IL..----. Sheet of Address

2. Plant McGuire Nuclear Station Unit 1.

Name 12700 Harers Ferry Road. Huntersville, NC 28078 41849473-01 Address Work Order # (or Relair/Replacment Orgninztion P.O. No, Job No., etc.)

3. Work Performed by Duke Enernrv Carolinas. LLC Type Code Symbol Stamp: N -/A NameAuthorization No.: IN/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: LN/A

4. Identification of System INV -Chemical and Volume Control

5. (a) Applicable Construction Code :ASME , - 19*i2 Edition, Summerand:Winter 7771 Addenda, fPA , Code Case (b) Applicable Edition of Section XM used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda_

(c) Applicable Section XI Code Case(s) IN/A A TeA -rnf Cnna4nnnAIC t

co.c t4d ýASME Code Name of facrer National O Year temoved, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No) 1NV93 Dresser . .. _ TG33993 j IN/A N/A Removed 11NV93 ['Dresser ... . TE-09046 1290 119781 L Italled

.., , .'-,. j . .. --'.-...

.- '. .......... . . .-* ...I =-_______

.... -.-- - " , , ,!' =' - -_,' ' _ ' [

7. Description of Work Rwlaced Comgonent/Part/Amuldwanc Additional Description 1NV93.7Repacedvalve

8. Tests Conducted- Hydrostatic ['_ Pneumatic E- Nominal Operation Pressure -* Exempt F Otherfi Pressure =i---PSI Test Temp. -= F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet of Component Line Size: 4 x 6 in. (nominal)

System Class: Cla2 Weld Isometric Drawing No(s).: 'MCFI-1NV68 Flow Diagram No(s).: 1MCFD-1554-01.01 Support/Restraint Sketch/Drawing No(s).: [N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacatrer's Daft Rqpms to be attached CERTIFICATE OF.COMPLIANCE I certify that the statements made in the report are correct and that this conforms to.the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp iN/A_____

Certificate of Authorization No. IN/A ] Expiration Date IN/A Signed Grass, Quality Assurance Technical Specialist ' , '- Date APril 13 205E Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Iand employed by Hartford Steam Boiler Inspection & Insurance Company I of I

k have inspected the components described in this Owner's Report during the period

-to J1.,,

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Iteport. Furthermore, neither the Inspectr nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from orunnected with this inspection. /

ot `__ __ L JF Swan .Commissions iNB1i1473-NC1524, N-I Inspector's Signature National Board State, Province, and Endorseintnts Date 2O-20L

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enermy Carolinas. LIX Date 14/8/2013 526 South Church Street. Chalotte. NC. 28201 Sheet -, of 2 AAA-~e

2. Plant McGuire Nuclear Station Unit I Name 12700 Hazers Ferry Road. Huntersville, NC 28078 1879317-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC .

Name Type Code Symbol Stamp: In/A Authorization No.: INIA 526 South Church Street. Charlotte. NC 28201-100(

Address Expiration Date: I K, i

4. Identification of System TW-R efueling Water ... .......

5. (a) Applicable Construction Code ;ASME I.........................

192.L Edition, !Summer and Winter . Addenda, N/A . Code Case.

(b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A.. .

6. Identification of Corn onents Corrected, ASME Code Name of Manufacturer NatiowA Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

FW5 TRW Mission N/A i 17H9129 9 16Corrected No

7. Description of Work Replaced ComnonentlPart/Apnurtenance Additional Description plate (disc) in valve ........ .. .FW5.

8. Tests Conducted: Hydrostatic F Pneumatic F Nominal Operation Pressure 2 Exempt [] Other [] Pressure .PSI Test Temp.F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME CodeSection XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet of [2 Component Line Size: ,6 fin. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-1W2 &

Flow Diagram No(s).: !MCFD_1571-01.00 Support/Restraint Sketch/Drawing No(s).: jN/A I Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form. .

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp MNA ... . .......-------- .--- ...

Certificate of Authorization No. N/A Expiration Date fNA Signed jFL Grass, Quality Assurance Technical Specialist Date jAprill82 1 Owner er Owner's Designee, Title IIiU"I I I" "I . .. . .

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

!NorthCarolina-d by Hartford Steam Boiler Inspection & Insurance Company Norh Crolnaand employed by . of

.Conecticut ... have inspected the components described in this Owner's Report during the period

! jIto

-E*. /.,_* ), and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner'0eport. Furthermore, neither the Insp tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from onnected with this inspection.

JFSa Comnmissions iNBI1473-NC1524,N-I

/Inspector's Signature National Board, State, Province, and Endorsements Date - ....... /, ,201 . ,

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI _ . ..

1. Owner Duke E..r2. Car-linasl U CDate 4/1/2013 526 Stuth rhurr~h Rtvppt Charlotte, NC, 28201 Sheet . of 2 Addreq*

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagnrs Ferry Road. Huntersville. NC. 28078 1922372-01 I i i i Address Work Order # (orRepak/ReplacmentOrgan _._ ._~~~~~~~....

-- .. i N

"_.I:..._,No.,:Job

_iontP.O etc.)

3. Work Performed by Duke Enerm Carolinas. LLC Name Type Code Symbol Stamp- N/A Authorization No.: IN/A 526 South Church Street. Charlotte. NC 28201-1006 _. '.. 2.1{/A .. . . ,.' '.

Addres .Ex'irationDate:

4. Identification of System VQ -Containment Air Release and Ventilation ..- . prtnDe: .

5. (a) Applicable Construction Code ASME ISIerand 19j. EditionI Winter Addenda, NA Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and2000 Addenda (c) Applicable Section XI Code C ase(s) N/A - -...... .. --- -.. .. . .

.6. Identification of Con onents Co0rected, ASMECode Name of Manufacturr National othrerd eStamrd or Component Name of Manufacturer Serial No. Board No. Identification Built (Yes or NO)

I1MCR-VQ-508: uke Eneg 10722 N/A 2 KNA IIN/A jRmvdN IMCR-VQ-508. Du7ke Ener 1'678 .;N/A N/A NiA Ins. . .d 2?j . .......

7. Description of Work Additional Description Replaced snubber on hanger IMCR-VQ-50

8. Tests Conducted: Hydrostatic r Pneumatic Nominal Operation Pressure r] Exempt ff' Other [] Pressure !.-.,..,PSI Test Temp. ýJ 0 F

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XM

9. Remarks (Should Include the Following Information, as Applicable): Sheet i2*of .2 Component Line Size: .6 in. (nominal) System Class: ASME Cl2 Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCFD-1585.0l-00 Support/Restraint Sketch/Drawing No(s).: I1MCR-VQ-508 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-VQ-2 _ _ _ _ _ _ _ ' _."... " ! : *".'.. . .I Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X3 Type Code Symbol Stamp 'N/A ..

Certificate of Authorization No.:N/A _____________________ Expiration Date Ri -

Signed FL Grass, Quality Assurance Technical Specialist 'A Iae 2 Owner or Owner's Dosigee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of NorthCarolina_ _ and employed by lHartford Steam Boiler Inspection & Insurince Company I..of Connecticut i '

Vv *pected the components described in this Owner's Report during tfie.0 "od;.

., andstate that to the best of my knowledge and belie the Owner has performed and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and conreptive measu described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pers injury or property damage or a loss of any kind arising from o connected with this inspection. -:7j JF Swan ,I~ Commiions NBI1473.NC1524,N-I Impanctor's Signature National Board, State, Province, and Endorsemnts Date ...- 0* ;

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner flule rngmcv rarnlinqe T.LC Date 4/5/2013 526 South Church Street. Charlotte, NC. 28201 Sheet Address

2. Plant McGuire Nucleri statin Unit !

Name 12700 Hagers Fezrrv Road. Huntersville. NC 28078 1922376-01 Address Work Order # (or RxpairfReplacoent Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerm Carolinas. LI Type Code Symbol Stamp:

Name harlotte, NC 28201-1006 Authorization No.: "IN/A 526 South Church Street C halt.N 821106Fk/ A Address Expiration Date: !"' Al

4. Identification of System YVE - Annulus Ventilation

5. (a) Applicable Construction Code ASME m, I19dL Edition, iSummer and Winter ! Addenda, 54 7...Code Case (b) Applicable Edition of Section X3used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N

6. Tdentificaticn nf Cin mnentq Cornered, ASME Code Name of Manufacturer National other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

,VE-100-O1-G DukeEnergy 19951 j N/A -/A . /A IRemoved No VE-100-01-G ,'Duke Energy 13-84,-31 ... N/A

. N/A

Installed N

.. .. ~~~~~ _ _ ... _: . . . .. ~._

~~

7. Description of Work Replaced Comiponent/Part/Amurtenance Additional Description Repýlace snubber on hanger I-MCR-S-VE-100-01-G.

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure Exempt 21 Other fl Pressure LJLIPSI Test Temp. 1 --- °F Description (Optional):

FORM NIS-2 OWNER'SREPORT FOR REPAIR/REPLACEmENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of LJ Component Line Size: "4 min (nominal) System Class: A5M2 Cl-0=2 Weld Isometric Drawing No(s).: IN/A __________________________________________i Flow Diagram No(s).: ;MCFD-1564-01.00 Support/Restraint Sketch/Drawing No(s).: i1-MCR-S-VE- 100-01-G .1 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacnurer's Data Reports to be attached CERTIFICATE OF COMPIUNCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X3.

Type Code Symbol Stamp ,N/A Certificate of Authorization No. __/A__ Expiration Date NA _

Signed 'FL.Grass, Quality Assurance Technical Specialist Owner or Owner's Designee, Tide Date F{Apri 25 3!

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company of Connecticut Ihave inspected the components described in this Owner's Report during the period 1 to , ],,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.

'F Swan . . . . . . . . ...-. Commissions NB11473-NC1524, N-I Insetar's Signaure National Board, State, Province, and Findorseinents Date! ,20L I I IIII 2I I I II

FORM NIS-2 OWNER'S REPORT FOR REPAIREPLACEMENT ACTIVITY.

As Required by the Provisions of the ASME Code Seeton XI

1. Owner Duke Enermv Carolinas. LLC Date 4/5/2013 526 South Church Street, Charlotte. NC. 28201 Address Sheet .1of

2. Plant McGuire Nuclear StatiOn Unit I Name 12700 Hagers Ferr Road. Huntersville, NC 28078 1922380-01.

Address Work Orde # (or R*pairtapwaccmcut Organizsou P.O. No, Job No., etc.)

3. Work Performed by Duke Enemv Carolinas. LLC Name Type Code Symbol Stamp: 1N/A Authorization No.:i 526 South Church Street Charlotte. NC 28201-1006

Address Expiration Date:N/

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code -. 19 DEdition, EASMEm FS-ner andWinter . Addenda, {N/A Code Case (b) Applicable Edition of Section XI used. for Repair/Replacement Activity 1998 Edition with the 1999and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A , ,

I1 I

7. Description of Work oae onw&u9 urn=

Additional Description Replaced snubber and itrs bolting material on hangr IMCR-NV-1067

[

l II , . "

8. Tests Conducted. Hydrostatic r, Pneumatic F Nominal Operation Pressure Exempt Other. Prere s*L PSI Test Temp. 10F Description (Optional):. ,

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEM(ENT ACTIVITY As Required by the Provisions of the ASME Code.Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet El of Li2 Component Line Size: I2 in. (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCFD-1554-01 .03 Support/Restraint Sketch/Drawing No(s).: 1IMCR-NV-1067 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: 1 .1~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE. OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,.Section XI.

Type Code Symbol Stamp IN/A ,. . ..- . ]

Certificate of Authorization No. iN/A Expiration Date__NiA Signed !FL Grass, Quality Assurance Technical Specialist Date Arl5, 203 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North-Carolina rIand a employe yed byof by Hartford Steam Boiler Inspection & Insurance Company may .. of Connecticut have inspected the components described in *this .,,

Owner's Report during the* period

.. *7. .

3

/- ;i.'

to ; LI.-- , and state that to the best of my knowledge and belief, the 'Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations. and corrective measures described in this Owner's Report. Furthermore, neither th tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or nncted with this *inspection.

JF Swan .... M-I1473-NCI524,N-I 7]

Ispector's Signature /National Board, State, Province, and Endotmenmts

ýDate;.-'--q *'- -i 20'4=

FORM NIS-2 OWNER'S REPORT FOR REPAIRIBEPLACEMENT. ACTiITY" As Required by the Provisions of the ASME Code Section X.

1. Owner Duke Enermv Carolinas. LLC Date 4/5/2013 526 South Church Street Charlotte. NC. 28201 Address Sheet Sef

[ of

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road. Huntermville. NC 28078 11922381-01 Address Work Order # (or Repair/Replacernew Organization P.O. No, Job No.. etc.)

3. Work Performed by Duke EnerWv Carolinas. LLC Type Code Symbol Stamp: !N/A Name Type CodeSymbolStamp-526 South Church S=L Charlotte. NC 28201-1006 Authorization No.: EN/A,__

Address Expiration Date: IN/A

4. Identification of System INV - Chemical and Volume Control

5. (a) Applicable Construction Code 'ASME I I 19JL Edition, Sum "e Winrr-- . Addenda, !N/A- Code Case (b) Applicable Edition of Section X) used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) ýN/A

6. Identification of Cor nents _. ..

Conectedi ASME Code Nameof Manufacturer National Other Year Removedor : Stamped Component Name of Manufacturer Serial No. Board No. Identification Built installed (Yes or No) 1i-MCRNV1064 Duke Energy 62 N/A - N/A /A oRemoved 1IMCRNV1O64 !Duke Energ jj38427 'IN/A _ N/A -j /A Installed N

... .-.. --.--.... I. .. ... .. ... .. . .. .. .. .. . . . ... . . .. . . . ----.

.....--- j...-..." .

7. Description of Work Replaced Comonent/Part/Apyutenanc Additional Description iReplaced snubber and its bolting material on hanger IMCR-NV-1064

8. Tests Conducted: Hydrostatic -'* Pneumatic !. Nominal Operation Pressure .i Exempt F. Other fl Pressure 7PSI Test Temp. ]LOF Description (Optional):

FORM NIS-2 OWNER'S.REPORT FOR REPAIR/REPLACEMENT ACTIVrTY As Required by the Provisions of the ASME Code Section X.

9. Remarks (Should Include the Following Information, as Applicable): Sheet IL of Component Line Size: t2 in. (nominal) System Class: ASMIi lasI Weld Isometric Drawing No(s).: ;.N/A.'

r low Liagram, r4oks).: 1MCFD-1554-01.02 Support/Restraint Sketch/Drawing No(s).: lIMCR-NV-1064 '. . -]

Other Applicable Information (e.g., W.O. No EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached C[ERTFCATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section NI.

Type Code Symbol Stamp >i A ........ ....

Certificate of Authorization No. .*N/A ExpirationDate IN/A.

Signed TL Grass, Quality Assurace Techcal Specialist .-- . . . Date D->t41APril"5: ,i 20L Owner or Owner's Designee, Title CERTMICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of, Noth-Carolina-. and employed by iVartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period:

3'----3-to i I Z. -, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the*examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspection.

iF Swan lCommissions INBI 1473-NC 1524, N-II Inpector's signature National Board, State, Province, and Endorsements Date L A2

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner Duke Enemy Carolnas.LLC Date T/5/2013 526 South Church Street Charlotte. NC. 28201 She .o Address Sheet of

2. Plant McGuixe Nuclear Station Unit 1 Name 12700 Haners Ferry Road. Huntersville. NC 28078 11922382-01 Address Work Order # (or R-pair/Repiacement Organization P.O. No., JobNo., ptc.)

3. Work Performed by Duke Energy Carolinas. LLC Type Code Symbol Stamp: IN/A Name Authorization No.: 1N/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: "N/.

4. Identification of System ýNI - Safety Injection

5. (a) Applicable Construction Code 'ASME 111 m 19j21 Edition.iSummer.-nd-Wi -ter ,IAddenda,:IN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999and2000 Addenda "

(c) Applicable Section )I Code Case(s) N/A

6. Identification of Corn nents _ __ __ __ __

Core ASME.C.d Name of Manufactr Nationml other year Removed; or " St'am;.d Component Name of Manufactmrer Serial No. Board No. identification Built lnalld " (Yes or No)

IMCR-NI-588 Duke Energy T152 I N/A .. ... N/A...N/AA

.... _ R *rn i:

IMCR-NI-588 'Duke Energy ,38352 N/A I" II NIA...I

+* No NON/A

.. . ...... ..... .. .. . ..... .... ...... . ... ......... ...... . ... . .L _ _........

.. . ..... . ....... ..... ..... . . .. ............. I.

L------

7. Description of Work Replaed Compment/Part/Ampurtenance Additional Description iRekplceisnubber on hanger IMCR-NI-588

8. Tests Conducted: Hydrostatic - Pneumatic r Nominal Operation Pressure F Exempt 2 Other .Pressure L.......PSI Test Temp.,- F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTWVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of Component Line Size: 6 in. (nominal) System Class: ASM Class I Weld Isometric Drawing No(s).: IN/A Flow Diagram No(s).: iMCFD- 1562-03.01 Support/Restraint Sketch/Drawing No(s).: 11MCR-NI-588 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Aplicable Manufactuza's Data Reports to be attached CERTIFICATE OF COM[PLIANCE I certif that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section MI.

IType Code Symbol Stamp 1:N/A'---

Certificate of Authorization No. IN/ Expiration Date N/A ____

Signed FL Grass, Quality Assurance Technical Specialist 1Date j~ri 2OL3]

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina ,, and employed by [Hartford Steam Boiler Inspection & Insurance Company of Connecticut I have inspected the components described in this Owner's Report during the period

-- -:-z..LL~to ~IiqZ~i~to", and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or nnected with this inspection.

JF Swan 7 0 "Commissions -i-ý B11473-NC1524, N-I Inspector's Signature National Board, State, Province, and Endorsements Date ,2O

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMTY As Required by the Provisions ofthe ASME Code Section XM

1. Owner Duke EneruM Carolinas. LLC Date 4/5/2013 526 South Church Street. Charlotte. NC. 28201 Sheet - of_

Axldress

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road. Huntersville. NC 28078 1922383-01 Address Work Order # (or Repair/Replacemet Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerpv Carolinas. LL( I Name Type Code SymbolStamp:. 'N/A Authorization No.: IN/A 526 South Church Street. Chharlotte. NC 28201-1006 **TAJA Address Expiration Date: ifI

4. Identification of System NI - Safety Injection

5. (a) Applicable Construction Code ASME Ul 19!2+/- Edition, Summer andWiter--- Addenda, IN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A O. Iaentifcation o0 Com nents

, ,a Corrected,. ASME Code Name of Manfaturr National other Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Idenification Built Installed (Yes or No).

1MCR-NI-584 Duke Energy .20611A .Removed No 1MCR-NI-584 Duke Energy 1:384 2N/A . "" N/A

A"Installed No

7. Description of Work Reglaced ComponentPart/Atrtenance Additional Description snubber on hanger ýReplaed IMCR-NI-584

8. Tests Conducted: Hydrostatic r Pneumatic r; Nominal Operation Pressure [] Exempt Other Pressure = PSI Test Temp. = OF Description (Optional):._ _

FORM NIS-2 OWNER'S REPORT FORREPARREPACEMENT ACIITY As Required by the Provisions of the ASME.Code-S*econ X ":

9. Remarks (Should Include the Following Information, as Applicable): .Sheet, 12 of Component Line Size: . (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: 'MCFD-1562-03.OI .{:

Support/Restraint Sketch/Drawing No(s).: 1MCR-NI-584 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

.1 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

IType Code Symbol Stamp iN/A I Certificate of Authorization No. IN/A Expiration Date "N/A Signed FL Grass, Quality Assurance. Techi Seils cal ci Date. !April ", .. 0 13 Owner or Owner's Designee, Title llm~ l I" " ' : II " : "r " . .. "" " " " . . . " ' "' " " " ' " "" :" " " " ' " ' ] ' " " " "" " I i CERTIFICATE OF INSERVICEINSPECTION......

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors, and the State or Province of North Carolinaandemployed by lHartford Steam Boiler Inspection& Insurance Company..

Connecticut have inspected the components descr*bed in this Owner's Report during the period

..~~. .?to, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning-the examinations and corrective measures described in this Owner's Report. Furthermore, neither the.Inms tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind.:

arising from connected with this inspection.

WFSwa - Commiasions iNBI17-N 54 N-I Inspector's Signature National Board, State, Provinme, and o ts-Date 20".

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required. by the Provisions of the ASME Code Section XI

1. Owner Duke Energv Carolinas, LLC Date A/5/2013 526 South Church Street. Charlotte. NC. 28201 Sheet Address

2. Plant McGuire Nuclear Station Unit .

Name 12700 Haoers Ferry Road. Huntersville. NC 28078 2386-01.

Address Work Order # (or Repair/Replacment Organization.P.O. No. Job No, ec.)

3. Work Performed by Duke Enerm Carolinas. LLC Type Code Symbol Stamp:

Name T "

526 South Church.Street. Charlotte. NC 28201-'006 Authorization No.: I'"A 52 ouhChrh Addres Expiration Date:-

4.IdentificationofSystem M Safety"IJectio'

5. (a) Applicable Construction Code . 1ASMEEdition, [Su§mmn 197I and.Winter AddendaN. -'&7 code Case.

(b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 199and2000 Addenda (c) Applicable Section XI Code Case(s) N/A - ....... " " ""...... . . . '

A ~n fr Pt .i-;

Corrected, - ASME Code Name of Manufactrr National .Ye

mo*Ve, or S Conmorent Name of Manucturer Serial No. Board No. Identification Built (Yes or NO)

... . . .. . ..- * . .. *. .. -N ...

.1MCR-NI-526 ; Duke Energy 20709 IN/A IN/A _Aje oved No 1lMCR-NI-526 DukeEnergy .38436-_ . . iN/A tN/A " .N/AJ Instal ." No.

___ . . LJ .

7. Description of Work elcdCmyetaryueie Additional Description ;,Replaced snubber and it's bolting material on hanger IMCR-NI-526

8. Tests Conducted: Hydrostatic r7 Pneumatic r-, Nominal Operation Presure El Exempt I? Other El Pressure 7. 7 PS1 Test Te .mp.__PF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIRIRE*LACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet Ila of____

Component Line Size: .. i6 (nominal)

System Class: ASME Class 2 Weld Isometric Drawing No(s).: WN/A I

Flow Diagram No(s).: MCF-l5-F2-0i.0l Support/Restraint Sketch/Drawing No(s).: lMCR-NI-526.

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: !

Applicable Manufactim's Data Reports to be attached CERTIFCATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X[.

Type Code Symbol Stamp -N/A Certificate of Authorization No. iN/A . Expiration Date N/A Signed FL.Grass, Quality Assurance Technical Specialist Date Aprl 5 20 1,

Owner or Owner's Designee, Title CERTICATE OF INSERVICE INSPECION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

'Nor-Carolina "Hand employed by [Hartford Steam Boiler Inspection &Insurance Company of Connectticut have inspected the components described in this Owner's Report during the period L-L /..Z to L VZ -L-- -Jt, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising forom or nnected with this inspection.

IF Swan . - lCommissions INBN-I I ....... 7----,

Inspector's Signature National Board, Statr, Pmvince, and Endorsements Date , 20L

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Seetion XI

1. Owner Duke Enerav Carolinas. LI .. Date. W/5/2013.

i I 526 South Church Street harlotte. NC. 28201 She of Addre~t

2. Plant McGuire Nuclear Station Unit I Name 12700 Ha~ers Ferry Road. Huntersville. NC 28078 i1922392-01 ..

Address Work Orde # (or Repair/Replmait OT*onization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerry Carolinas. LLC Name Type Code symbol Stamp:N/1 Authorization No.:. IN/A 526 South Church Street. Charlotte. NC 28201-1006 ,XI A I Adress Expiration Date: j'

4. Identification of System NC - Reactor Coolant

5. (a) Applicable Construction Code i9[ FASMEm Edition, iSmerad Winter- 7Addenda, N/A i Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition wit the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) .N/A ,

I

7. Description of Work Replaced Cm nentart/Amurtnance Additional Description :Renlaced snubber on hanaer IMCR-NC ,564

8. Tests Conducted. Hydrostatic r7 Pneumatic C] Nominal Operation Pressure ] EXempt 2 Other ] Pressure =I- PSI Test Temp. = OF Description (Optional): i

FORM NIS-2 OWNER'S REPORT FOR REPAMlRREPLACEME AC TIV As Required by te P ons of the ASME CodeSecton XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet of Component Line Size: 4 in.j (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: !NA Flow Diagram No(s).: iMCFD- 1553-02.00 Support/Restraint Sketch/Drawing No(s).: IIMCR-NC-564 777 -1 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NC-03 Applicable Manufiacur's Data Reports to be attached i

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section-XL Type Code Symbol Stamp fp/A Certificate of Authorization No. _ _ __A_ _ Expiration Date iN/A Signed IFL Grass, Quality Assurance Technical Specialist I Date I iI 20 Owner or Owner's Designee: Title I ' * " "". .: . , ." i " .* * . .. , . . : . . : " ." i .

CERTIMCATE OFINSERVICE INSPECTION

, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina I and employed by aord Steam Boiler Inspection &kIsurance Compn of Connecticut i have inspected the components described in this Owner's Report during the period.

1 = !-to' g A3 1.,,

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Reeport in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corre6tive measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a% loss of any kind arising from or connected with this inspection JF Swan '- - ,,------ .. -Commissions l--/-- iNB-473.-NCl524jN-I

,7 inspector's Signataue - National Board, State, Province, and Endorsements I

FORM NIS-2 OWNER'S REPORT FOR REPAIm/RPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enermv Carolinas. LLC Date 52 526 South Church Street. Charlotte. NC. 28201 Sheet of Address

2. Plant McGuire Nuclear Station Unit I Name 12700 Hakers Ferry Road. Huntersville, NC 28078 '1922393-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energv Carolinas. LLCTN/A Name Type Code Symbol Stamp: I--A 526 South Church Street. Charlotte. NC 28201-1006 Authorization No.: iN/A ExphrationDat:

Address Expiration Date: IN/A

4. Identification of System ;NC - Reactor Coolant

5. (a) Applicable Construction CodeA.E .i.i

. .. .. .. l9[L, Edition, mAddenda, . ...... Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with ft 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Corn nents Coniected, ASME Code Name of Manrkure National Other Year Removed or " Stamped Component Name of Manufacurer, Serial No. BoardNo. ldentificadon Built Installed (Yes or No) 1MCR-NC-554 Duke Energy T21901 VN/A AN/A N Removed No i". ii

. I. . ] . .. * . I..

.i. ... .. ...... l 1MCR-NC-554 DukeEnery38446. - N/A / Installed KN/A.

ii . .. 1

_........._._._._..... . -. " j 1____"

7. Description of Work laced Component/ftntAgnurtanac Additional Description iReplaced snubber on haniger 1MCR-NC-554

8. Tests Conducted: Hydrostatic rn Pneumatic C *Nominal Operation Pressure fl Exempt 2] Otherl] Pressure, PSI Test Temp. = OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code"Section xi"

9. Remarks (Should Include the Following Information, as Applicable): Sheet L of__

Component Line Size: 4--j- -]'in. (nominal) System Class: ASM .oI.

Weld Isometric Drawing No(s).: JN/A Flow Diagram No(s).: MCkFD-1553-02.OO I Support/Restraint Sketch/Drawing No(s).: j1MCR-NC-554 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: r.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASMIE Code,Section X.

IType Code Symbol Stamp iN/A -_

Certificate of Authorization No. PN/A Expiration Date ,N/A Signed iFL Grass, Quality Assurance Technical Specialist 1.Date IA~rR 5, 200il Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina 1 and employed by !Hartford Steam Boiler Inspection-& Insurance Company of

Connecticut have inspected the components described in this, owner's Report during theperiod Ii22iP2*,~~

~0 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Insptor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fhrom or c ected with this inspection.

SSwan .. l 7//- * -Q - Y)/-,- -o f.73NC.. 4 'N- - .. ........................ -I Inspector's Signatu Na onal Board,

-- State, Province, and Endorsements Dates7." 2O0,L

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enery Carolinas. LU LC Date 3/31/2013 526 South Churrh Sqtrept Charlotte. NC. 28201 Sheet ShetI o !

_ of Add*

2. Plant McGuire Nuclear Station Unit I Name 12700 Hamers Ferry Road. Huntersville NC 28078 1922570-01 Address Work Order # (or Repair/Replacement Organization P.O. No, Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: FN/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: iN/A

4. Identification of System SM -Main Steam

5. (a) Applicable Construction Code ASME m 19ZL Edition, SumiertadWmter i Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A ..

6. Identification of Corn nents Corrected, ASMECode Name of Manufacturer National Other Year Removed, or Stiped ComponentName of Manufacturer Senal No. Board No. Idenification Built Installed (Yes or.No) 1MCA-SM145 Duke Energy 15874 : N/A !N/A . .N/A Removed, No IMCA-SM145 Duke Energy JN/A I/A M17374 N/A Removed No 1MCA-SM145 Duke Energy 138350 N/A No IMCA-SM145 Duke Energy 377 /A N/AN/A Installed N

L..... .. ....

7. Description of Work RtlcdCm~nn/ath~reac Additional Description Replaced snubbers on hanger 1MCA-SM-145.

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure r. Exempt F Other r Pressure yPSl Test Temp. L 9F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: i42 in. (nominal) System Class: ASME Class2 Weld Isometric Drawing No(s).: .N/A --

Flow Diagram No(s).: MCFD-1593-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-" SM145 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: .MCSRD-SMASi Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X[.

Type Code SymboliStamp ':N/A Certificate of Authorization No. N/A I Expiration Date IN/A Signed FLGas ult ssurance Technical Specialist D ate... 31 ... 2,213 Owner or Owner's Designee, Title -

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel lnspeetors and the State or Province of North Carla . - --. and employed by Hartford Steam Boiler Inspection.& Insurance Company of Connecticut , have inspected the components described in this Owner's Report during the period itto and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of anykind arising from or onnected with this inspection.

JF SwanN-* 1N473-NC1524, N-I National Board, Stare, Province, and Endorsments Date 20

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerry Carolinas, LILC Date 7/11/2012 526 South Church Street, Charlotte, NC, 28201 Sheet . of 2 Address

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road, Huntersville, NC 28078 1928909-06 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerev Carolinas. LLC Name Type Code Symbol Stamp:. NIA Authorization No.: N/A 526 South Church Street, Charlotte, NC 2820 t- 1006 Address Expiration Date: N/A

4. Identification of System WG - Waste Gas

5. (a) Applicable Construction Code ASME IlI 19.7.L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed ition with the 1999 and 2000 Addenda.

(c) Applicable Section X1 Code Case(s) N/A

6. Identification of Components Corrected, ASME Code Nane of Manufacturer National Other Year Removed, or .Stamped Component Name of Manufacturer Serial No, Board No. Identification Built Installed (Yes or No)

WGO piping System Duke Energy N/A 25 :N/A 1980 Installed Yes IWG254 ITT Grinnell 75-1666-6-6 WRI 199 N/A "1975 Removed Yes I "-

1WG254 ITT GrinneU 80-52459-4-20 WR5991

1. .

N/A . .. ."... ... ... ... . * ...

1980.- . IInstalled

. ;. .... n t a Yes .

7. Description of Work Replaced Component/Part/Appurtenance Additional Description Replaced valve 1WG254 and piping

8. Tests Conducted: Hydrostatic F" Pneumatic - Nominal Operation Pressure F. Exempt r Other F Pressure :71 PSI Test Temp. 79 LOF Description (Optional): test performed per procedure MP/O/A/7650/076

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of.2 Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-IWGl4& 38 Flow Diagram No(s).: MCFD-1567-02.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist

Date. July11 20!i2.

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by .HSB Global Standards of Connecticut have inspected the components described in this Owner's Report during the period

/ - to. 7-7z/01 -/ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code.Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning.the examinations and corrective measures described in this Owner's Report. Furthermore, neither the tnspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.

JFSw Commissions NBI1473-NC 1524, N-T

/Inspector's Signature National Board. State. Province, and Endorsements

/ae 20/0/

FORM NIS-2 OWNER'S REPORT FOR REPAIRREPLACEMENT ACTIVITY As Required by the Provisions of the ASME CodeS.ction I*.

1. Owner Duke Enerzv Carolinas. LII1C ,Date 4/l1/2013 526 South Church Street. Charlotte. NC, 28201 2 Address Sheet 1l of -

2. Plant McGuire Nuclear Station Unit! I Name 12700 H~aners Ferry Road. Huntersville. NC 28078 :1932305-01 . ....

Address Work Order # (or Repair/Replacement Organization P.O. No..Job No*et.)

3. Work Performed by Duke Energv Carolinas. LLC Name Type Code Symbol Stamp: . . .

Authorization No.: N/A . .

526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: N/A

4. Identification of System ND - Residual Heat Removal

5. (a) Applicable Construction Code ASME 111 19 Edition, Summer and winter i Addenida, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Editio with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Components .....-

.Corrcted, ASME Code Name of Manufacturer National ORe Year mnoved, or Stamped.o Component Name of Manufacturer Serial No. Board'No. identification Built *nstaie. (Yesor No)

IND64 Dresser TD52156 20 N/A . 1976 Removed Yes 1ND64 Crosby see other N/A N900208-00-0002 "'2012 Installed Yes

. . .. .... .. ... I ' * -~.. . . - . ~~... ...... .

.".... L. : .. .- . ... " " "' .

~~~~..

7. Description of Work Replaced Comyonent/Part/Anourtenance Additional Description R1*placed valve IND64 per ECi02978 * . . .

8. Tests Conducted: Hydrostatic F Pneumatic r Nominal Operation Pressure 2 Exempt Fý Other 7 _Pressure :. PSI Test Temp. iW:

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code SectionXI 2

9. Remarks (Should Include the Following Information, as Applicable): Sheet of.2 Component Line Size: I x 1 1/2 in. (nominal) System Class: ASME Claw 2 Weld Isometric Drawing No(s).: MCFI-IND13 Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.Q. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

IType Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , ...-. - Date;Aprilll ,20, I Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel instectors and the State or Provice of North Carolina and employed by 'Hartford Steam Boiler Inspection Insurance Company of.

Connecticut have inspected the components described in this Owner's Report during the eriod.

2 - .2 llll2l lto " L/ /.......!, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken Corrective measures described in this Owner's Report in accordane with the requirements of the ASME Code, Section XL.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind.

arising from o onnected with this inspection.

JF ommissions, NBI1473-NC,1524,.N-.

Cwa Inspector's Signature .National Board, State, Province, and Endorsements Date V/. H. 201L&

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke EnerUv Carolinas, LILc " ,Date 4i/9/2013 [

';21; S 11th 1"h-h AAA-l.*

4Z---t Charlotte, NC. 28201 Sheet 2 I

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road, Huntersville, NC 28078 11948970-05 Address Work Order # (or Repair/Replacement Organization P.O. No., .ob No., etc.)

3. Work Performed by Duke Energv Carolinas. LLC Name Type Code Symbol Stamp: _N/A Authorization No.: IN/A.

526 South Church Street, Charlotte. NC 28201-1006 Address Expiration Date: I .

4. Identification of System INV - Chemical and Volume Control

5. (a) Applicable Construction Code `ASME I! 1912L. Edition, Summer and Winter I Addenda, A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A _. ..

6. Identificantion nf mon *nente Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

IMCR-NV-568 'Duke Energy iIN/A LN/A.. . -N/ - N Corrected No

_j

7. Description of Work Other (Describe Below)

Additional Description Removed a portion of item 1 and 2 on hanger 1MCR-NV-568 per EC103109

8. Tests Conducted: Hydrostatic . Pneumatic r Nominal Operation Pressure . Exempt FP Other F Pressure PSI Test Temp. 'OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable). Sheet j12 1of 12 ý1 Component Line Size: i2 .n. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: iN/A Flow Diagram No(s).: 4CFD-1554-01.00 Support/Restraint Sketch/Drawing No(s).: ,MCR-NV-- 8 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: jMCSRD-NV-24F-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

IType Code Symbol Stamp 'N/A -

Certificate of Authorization No. N/A Expiration Date _ _ _ _

Signed ýFL Grass, Quality Assurance Technical Specialist Owner or Owner's Designee, Title

\ 4 . 1Date.!Apri 92OL!

I i CERTIFICATE OF INSERVICE INSPECTION

[, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of . -

North Carolina and employed by IHartford Steam Boiler Inspection & Insurance Company " of

-Connecticut have inspected the components described in this Owner's Report during.the period

. , - - ' -and

- state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XM.

By signing this certificate neither the Inspector nor his %mployermakes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner?' eport. Furthermore, neither the Ins tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r onnected with this inspection.

O

. .... f - -*~

-i t #/.m/ ~ an... ...~~~..-

... .. . .. .. .. - , 2 i --

~Commissions jNB I 1473-NC 1524, N-I Inspcto's SgnaureNational Board, State, Province, and Endorsements Dat MILL

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enera~v Carolinas VT

.... *'i*T "* "r --TTI r" Date -4/15/2013 rh,,n-.h Cgropt Charlotte. NC. 28201 Sheet .1' of 22 Address

2. Plant McGuire Nuclear Station Unit I Name * ." .. ..... . ... . * .. .. . .. ... . * .. . .. 2 . .... .... .. ... ..... ...... .. .... .. "... . ..... . .....

12700 Hagers Ferry Road. Huntersville. NC 28078 .1956812-01 Address Work Order # (or Repair/Replacement Orgaiz*rion P.O. No, Job No., M.)

3. Work Performed by Duke Enermv Carolinas. LLC Name Type Code Symbol Stamp: 'N/A Authorization No.: !N/A ,

Auth o..........:. :N/A .. ......... ....

.526 South Church Street. Charlotte. NC 28201-1006 Address Expirauon Dare: -

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASME III 19 .21 Edition, tSummer and Winter I Ad*d , N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Components

7. Description of Work Replaced Comonent/Part/Ap-urtenanee Additional Description Replaced disc in valve INV459

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure F Exempt r Other - Pressure PSI Test Temp. OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAmREPLACEMENT ACTIM*TY As Requiredby the Provisionsof the A CMES tion-C M

9. Remarks (Should Include the Following Information, as Applicable): 2 2 Sheet oof Component Line Size: :2 in. (nominal) System Class: ASMIClass 2 Weld Isometric Drawing No(s).: 1MCFI-NV26 .... .

Flow Diagram No(s).: MC2D-1-54: . -

Support/Restraint Sketch/D rawing No(s).: .... -.

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

... ~.......................................................................................................... *-

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COM[PLIANICE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section X.

IType Code Symbol Stamp ,N/A ..

Certificate of Authorization No. N/A Expiration Date iN.A Signed FL Grass, Quality Ansurance Technical Specialist . .i Date April 15 i 2013*

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel In tOrs and.the State:or Province of North Carolina ' . !and employed by Hartford Steam. Boiler Inspection & Insurance Company . of Connecticut have inspected the components described in this Owner's:Report during the period...

3 -/-. -to -- "L --- , and state that to the best of my knowledge and belief, the Owner has perormed examinations and taken corrective.

measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section X.

By signing this certificate neither the Inspector nor his apoyer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's rt. Furthermore, neither the r nor his employer shall be liable in any manner for any personal injury or property damage or alosspof any kind arising from or !ected with this inspection.

S.JFSwan " .- Commissions :NBI1473-NC1524,-N4*

/oa.

SnNational State. Province, and Endorsements-. .

Date20 3

FORM MS-2 OWNER'S REPORT FOR REPAIRREPLACEMENT ACTrivY As Required by the Provisions of the ASME Code-Section XI

1. Owner Mlu~' Fnermv ramlinsia .1C ' "Date Wi/4/2013 526 South Church Street- Charlotte. NC. 28201 Sheet LL of AAd~

2. Plant McGuire Nuclear Stto Unit I Name 12700 Haiers Ferry Road. Huntemville. NC 28078 Wr95748907". "' ","

Address Work Order # (or lcai/Raplaceznen Organirnajon P.O. No., Job No., etc.) .

3. Work Performed by Duke EnerMv Carolinias. NameLLC 1

(

Type Code Symbol Stamp:

Authorization No.: [IA 526 South Church St reet. Charlotte. NC 28201-1006 N /A Address Expiration Date: IN/A

4. Identification of System iNI - Safety Injection

5. (a) Applicable Construction Code [ASMEM , 19j.j Edition, -um*e and Winter- Addendaý FNI7 Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition withthe 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A , 1

6. Identification of Corn onents.. .

Conect4d ASME COde Name of Manufalcturer Nationa ohe Year Removed, or Stam*e Complonenlt Naeo auatrrSerial ofK MN90030i0-- other No. Dowrd No.

7 Identification BitInstalled.

(Yes or No) 1N152 Crosby jee 0 0 00er[9 4 208 Removed Yes 1NI52 Cob e other 1NAI190030.00-0002_ L208 stleYs

.. . I _.... _ __1__ __ I.. ~ I~ i_ _ _ _

FII

_______________ _____________________________________ A__

7. Description of Work Replaced ComyonentTaWApv Additional Description nlac leIN152

8. Tests Conducted: Hydrostatic [' Pneumatic r Nominal Operation Pressure I] Exempt El Other ] Pressu= [Z= PSlI Test Temp. =Z-7OF Description (Optional): I

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet . of -l Component Line Size: - .. in. (nominal) System Class: A [hUM1ui Weld Isometric Drawing No(s).: iMCFI.IN1I3 Flow Diagram No(s).: MCFD-1562-02.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COM[PLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,. Section )a.

IType Code Symbol Stap 1N/A Certificate of Authorization No. I Expiration Date N/A I~~ 'o.o.,*..*,

~~~~~~~

Signed ýFL Grass, Quality Assurance Technical Specialist KC e

-iDate *"

fApil 4 2 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION.

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina . and employed by Hartord Steam Boiler Inspection & Insurance Company . of Connecticut . have inspected the components described in this Owner's Report during the period:

-'-L ,to - and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective easures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or qonnecid with this inspection..

IJF Swan' . IY-4 -- -d iCommissions 1 1i1473.3NC1524, N-I Inspector's Signature I Nationsl Board, State, Province, and Endorum*nt.

Date i i __I i i ,201.L3

FORM NI-2 OWNER'S REPORT FOR REPAIRREPLACEMENT ACTrM As Required by the Provisions of the ASME Code Secton X

1. Owner Duke Eneray Carlinas. LLC Date. .4-/412013 526 South Church Street. Charlotte. NC. 28201 "

of-4heet" Address S

2. Plant McGuire uclear S Unit I Name 12700 Ha=ers Ferry Road. HuntersvilieNC 28078 1957490-06 Addre. Work Order # (or Rqmhr/Replavernan Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerev Carolinas. LLC Type Code Symbol Stamp- ,N/A Name 7.

-. 'Authorization No.: [W:A 526 South Church Street. Charlotte. NC 28201-1006 Autho.ization~ot: JNNA Address Expiration Date:N/

4. Identification of System NI - Safety Injection

5. (a) Applicable Construction Code AS EM . 19Lfl Edition, 1umma land Winter I Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A "'

6. Identification of Co p onents _...-_..... _.... .. .. ... .._"_

Corrected. ASME Code Name of Other Year RNtoi or Remove, Stampe*d moet Name of Manufacturer Serial No. Board No. Id-eaification Built : 0."40"I".(Yesor. No)

IN163 iCrosbY . see other . iN/A N900030-00-0008 4 20 Removed N163 C sy .... see other . NA N900030-00-0001. 20 h Iie Yes J 13lrosby N/A ________

.. ,,. .... ..... .... I I,,

7. Description of Work Ralaced Comnonent/art1A uteance Additional Description .e.ae a

8. Tests Conducted. Hydrostatic [] Pneumatic r, Nominal Operation Pressure F1 Exempt r- Other f Pressure I PSI Test:Temp. L_--JOF Description (Optional):

FORMNIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the6ASME C6oýe Stion 3I

... . 1..-.

Sheet).: . of.

9. Remarks (Should Include the Following Information, as Applicable):

Component Line Size: l 2 "in.(nominal) System Class: ASME Clas 2..

Weld Isometric Drawing No(s).: jMCFI-INIl3 Flow Diagram No(s).: ~F-6-2.00 s.1 Support/Restraint Sketch/Drawing No(s).: IN/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: r Appliabe ma. Data Rqx*. to be attaced

.u.t.ms CERTIFICATE OF COMPLIANCE.

I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp IN/A -"""_,,,,,,,"_,_,_,,,,__]i____,-'____,,__,',,'_,,____ ",_,

Certificate of Authorization No. "N/A Expiration Date Signed FL Grass, Quality Assura2ce Technical Specialist -'t, 1A I,

f14*is::.

Owner or Owner's Designee, Ttide

. . .,; ..... " :...:."'i.;.*... _.. .... *..,,

-CERTIFCATE OF INSERVICE. 9NPECTO I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the* State or Province of North Carolina and employed by Hartford Steam Boiler lns tion &In cComay : of Connecticut have inspected the components described in this Owner's R td the perod ,

i. 2 --l tol q, -L

? ,- and state that to the best of my knowledge and belief, Owiner ihe has performed examinations and t"ake- corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section )I.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, On gtheexaminationsand corrective meas described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any mantner for any personal. injry or rope da a o.ss. of any -kind arising from r connected with this insp a.

IJF Sw-an-I .pv --.-. ..

mmica-.,., .NB1 47-.c14.N.I 1 inspectoes! National Board, Province, and Eaddrminents

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY , I As Required by the Provisions of the ASME.Code Section XM

1. Owner Duke Eneyv Carolinas. LLC Date ./4/2013 526 South Church Street. Charlotte. NC. 28201 Sheet 1 Jof Address

2. Plant McGuire Nuclear S Unit 1 Name 12700 Hagers Ferry Road. Huntersville, NC 28078 11957491-06 Address Work Order # (or RepairtReptlacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code Symbol Stamp: N/A Authorization No.: IN/A .. . I 526 South Church Street Charlotte. NC 29201-1006

.......................... * "Y" IT"........

Address Expiration Date: .IN/A ..

4. Identification of System NI - Safety Injection . . . . . .. . . . . . . . . . .. . . . . . . . .. . . . . . tJ.

5. (a) Applicable Construction Code MASME II 19dLj Edition, iSummer and Winter Addenda, [L/&A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity -1998Editinn with th. 1Q n*nnA pnAn dfldfl (c) Applicable Section XI Code Case(s) ýN/A

6. Identification of Comnonents Name of Component Name of Manufacturer Manufacturer Serial No.

National Board No.

Other Identification year Built Corrected Removed, or Installed ASME Code.

Stamped (Yes or No)

I.

11N174 -- *Cro sby ................... Ise other .... N/A_ _"j90003_0-00__oo007 1208 Reoe Yes 1I74 C sby........... . seeother jNA N900030-00-O010 201 talled Yes I.. - .I, T .

.,.._F

___.j

- - ----- __ _ __ __ _ __ _ II, .,

~... I~ . I II1 il III

7. Description of Work

.. ~ ~...i~IIL.4L Waged Com nent/Part/AMurtnaw

--Il'- _____________ I Additional Description Ieplaced valve IN174

8. Tests Conducted: Hydrostatic 17 Pneumatic 1- Nominal Operation Pressure P3 Exempt

Otherl Presms L .IPSI Test Temp. W OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet E of L1.

Component Line Size: 1 lx-- in. (nol) System Class: A~Mfflnaa.

Weld Isometric Drawing No(s).: IMCFI-INII07 Flow Diagram No(s).: TMCFD-.1562-02.01 Support/Restraint Sketch/Drawing No(s).: jN/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

-I Applicable Mmulbctmer's Data Reports to be attache CERTMFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XM.

Type Code Symbo Stamp IN/A imlIl l *}*

~~ ......

....... .. i .. . ...... .,W 7.'

Certificate of Authorization No. INAExpiration Date. [N/A Signed !FL Grass, ,Quality Assurance Technical Specialist . Date JAIA1 ,4 20 1 .

Owne or Owner"s"Designee, Tite*

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel.Inspectors and the State or Province of iNorthCarolina and employed by fo*d Steam BoilerInspection & Insurance Company 1 of Connecticut have inspected the components described in this Owner's Report during the period

-"Ito - and state that to the bst of my knowledge and beief&the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising ftom connected with this inspecti JF Swan Commissions [NIB11473-NC1524, N-I Inspector's Signature " National Board, State, Province, and Endorsements

_T17-r---

i S2OLL..P

FORM NIS-2 OWNER'S REPORT FOR REPAIR/RELACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enermv Carolinam. LiLC Date 4/4/2013 526 South Church Street. Charlotte. NC. 28201 Sheet of AAA-

2. Plant Unit I Name I ?70fl Maakvrq Fprrv 1Rnna Maintp-rqnn~lps '9RY 11957492-06 Address Work order # (or Repair/Itplaceinva Oranation P.O. No., Job No., ec.)

3. Work Performed by Duke Ener2v Caroinas. LLC Name Type Code Symbol Stamp: IN/A.

Authorization No.: N/A 526 South Church Street Charlotte. NC 28201-1006 Address Expiration Date: N/A

4. Identification of System INi S Ianjeinction

5. (a) Applicable Construction Code ASME III 19E7- Edition, S-mm Winter IAddenda, Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1.999.ad 2000 Addenda (c) Applicable Section XI Code Case(s)!N/A

6. Identific~ation of Comnonnent .. ..

Conected ASME Cod Nan fManufacoure National Ote e.a. Removed, or: Stamped~l

____ ____ ___ Name of Manufacturer SerWaNo. Board No. Identification Built likeSIIed (Yea or No) 1N186 jrosby Je ther ___________ 20_0_Ye IN186 !rsyIse other 11salied Ys

..-... . . . . . . .~ ~ ~ ~~~........

_ __ _ _ _ _ _ _ L

_~~~~~.- _ .1

7. Description of Work RglaedCopoenAartAureanc Additional Description Re placed valve IN186.

8. Tests Conducted: Hydrostatic fl Pneumatic 17 Nominal Operation Pressure 2] Exempt fl Other l Pressure.-=PSIii Test Temp. = OF Description (Optional):

FORM NIS-2 OWNER'S.REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl

9. Remarks (Should Include the Following Information, as Applicable): Sheet of 1'"2 Component Line Size: i--- ]in.(nominal) System Class: A CIas2 Weld Isometric Drawing No(s).: [MCF.IN113 Flow Diagram No(s).: 1MCFD-1562-02.01 Support/Restraint Sketch/Drawing No(s).: IN/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manuf.cturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section M i.

IType Code Symbol Stamp jN/A Certificate of Authorization No. INAExpiration Date IN/A Signed ýFL Grass, Quality Assurance Technical Specialist Date

- f~n4 L13[]

Owner or 0woer~s Dlesignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel InspectorsadteSaeo rvneo North Carolina 1and employed by Hartford Steam Boiler Inspection & Insurance Company of IConnecticut have inspected the components described in this Owner's Report during the period

-P 7 -- to -t*/_ .3 1,and state that to the best of my knowledge and belief&the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section X ..

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective me descnrbed in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspecto IF Swan NBI1473-NCIS24, N-I

/

Ii I National Boad, State, Province, and lEdoramnata

-lnpector's Signature 7 Date __7 a- t( 0 I!,20LJ.,.D

-11ý

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke F.nertsv Carn1inr~ II AC Date 7/11/2012 Duke En srv Carnlin L 526 South Church Street.I Charlotte, NC. 28201 Sheet . of 2 AAA,.,,.,

2. Plant McGuire Nuclear Station Unit I Name 12700 Haeers Ferry Road. Huntersville, NC 28078 1981590-11 Address Work Order N (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas, LLC Type Code Symbol Stamp: N/A Name Authorization No.: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: N/A

4. Identification of System WG - Waste Gas

5. (a) Applicable Construction Code ASME I11 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Com onents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

WG piping System Duke Energy N/A 25. N/A 1980 Installed Yes 1WG238 iTT G3innell 75-1666-6-25 WR1218 N/A 1976 Removed Yes 1WG238 iTT Grinnell 80-52459-4-2 WR5973 N/A 1980 Installed Yes

. ... . ...:... . ... ... . . . ... ".... . L . .. . . " ". 5 1 ' .T; I_ ... . . . .. .. I . ............. ;. . ... ...... ..... .. ...

, .... . . .... ... .. . . ... . . ... . , . . . . . ..... .*I . ... ... ... ...... .... . :

7. Description of Work Replaced Component/Part/Appurtenance Additional Description Replaced valve 1WG238 and piping

8. Tests Conducted: Hydrostatic I" Pneumatic r Nominal Operation Pressure f" Exempt r Other r- Pressure 71 PSI Test Temp. 79 OF Description (Optional): test performed per procedure MP/0/A/7650/076

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-IWG4 Flow Diagram No(s).: MCFD-1567-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information.(e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 11 , 20 12 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

.North CaroI ina ..... and employed by HSB Global Standards of

'Connecticut have inspected the components described in this Owner's Report during the period to 7-/ ' - . , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described infthis Owner' Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from .connected with this ._inspection.

JF Sw Commissions .NBI 1473-NC 1524, N-1 National Board, State, Province, and Endorsements D . / ns-cosLgntu "

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner fluke Enemy Carolirua~ LL Date 4/2/2012 Duke Enerpv Carolinas Ll 526 South Church Street. ( harlotte, NC. 28201 Sheet 1 of .2 ArtAli~

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road. Huntersville, NC 28078 2003909-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: N/A Authorization No.: :N/A 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration DateW N/A

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASME Ill 192L Edition, ýSummer and, Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed ition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped .

Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

'NVPipngDuke Energy N/A 3 NVP.ping.Duke.nergy.N/A.37.N/

N/A .... .. !1981 Installed 1981 *IlnstalledYs Y

.N V P ip in g....

.. . . .... ... . ".. .... I". . .... *

7. Description of Work Replaced Component/Part/Appurtenance Additional Description Replaced flange, bolting and weld at the discharge of the PD pump per work order 1952614-39.

8. Tests Conducted: Hydrostatic F Pneumatic F Nominal Operation Pressure F, Exempt r Other F Pressure 2530 .IPSI Test Temp. 905.F Description (Optional): test performed per procedure MP/0/A/7650/076

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet o2 .

o°fý2 !

Component Line Size: 4 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-1NV144 Flow Diagram No(s).: MCFD-1554-03.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date April22 20 12 Owner or Owner's Designee. Title - "

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.

North Carolina and employed by HSB Global Standards of Connecticut have inspected the components described in this Owner's Report during the period 2 - D, to. -. -, and state that to the best of my knowledge and belief, the Owmer has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's port. Furthermore, neither the Insp ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or nected with this inspection.

JF Swan Commissions NBI3473-NC1524, N.I eNational Board, State. Province, and Endorsements

FORM MS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerpv Carolinas. LILC Date I013 Sheet 1/of 526Soth Chtirih Str~t Charlotte. NC. 28201 I-

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road. Huntersville, N-C 28078 12005580-01 .. ..-.

Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enermv Carolinas. LLC Name Type Code Symbol Stamp: R/A Authorization No.: IN/A. ."

526 South Church Street. Charlotte. NC 28201-1006 fXT*. A- .-

Address Expiration Date: .

4. Identification of System iVI - Inst-nime'nt Air

5. (a) Applicable Construction Code fASME Ill 19ai Edition, fSurmr and Winter Addenda, ./A- Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addeda_

(c) Applicable Section XI Code Case(s) !N/A

6. Identification of Components

7. Description of Work Renlaced Comnonent/Part/Apnurtenance Additional Description lRenlaced nine clann on hanger 1MCR-S -VI-IO0-OI-O .I

-VI-100-01-0

8. Tests Conducted: Hydrostatic E Pneumatic El Nominal Operation Pressure El Exempt F1 Other[] -Pressure =iPSI Test Temp. = OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): SheetE:- of F2" Component Line Size: 2F -in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: iN/AY Flow Diagram No(s).: FMiCFD-1i6-05-01.02 .

Support/RestraintSketch/DrawingNo(s).: iMCR--S- VI-00-0mQ Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: [.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COM[PLIANCE I certif that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section MI.

IType Code Symbol Stamp 1N__ ________

Certificate of Authorization No. IN/A ExpirationDate .NA Signed Grass, Quality Assurance Technical Speci.".t "FL Date.Ap 1311.

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and.the State or Province of North Carolina and employedby Hatord Steam. Boiler Inspection & Insurance Company . of iConnecticut have inspected the components described in this Owner's Report during the period LS jto l*,I IZ".---* 3

_i-.. , and state that to the best of my knowledge and belief; the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' ,Report. Furthermore, neither the is tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind-arising from */nnected with this inspection.

IF Swan commissions C........./_[ INBI1473-NC1524, N-I National Board, State, Province, and End6rsments

FORM Ms-2 OWNER'S REPORT FOR REPAIRREPLACEMENT ACT[VrIT As Required by the Provisions of the ASME Code Section XI I. Owner Duke Energv Carjlinas. LLC Dat 1/13/2013 . . . .. ---7 526 South Church Street. Charlotte. NC. 28201 Sheet of -

Address

2. Plant McGuire Nuclear Station Unitl Name 12700 Haters Ferry Road, Huntersville. NC 28078 i2007130-01 Address Work Order # (or Repair/Replacment Organization Fý.O. No., Job No., e.tc.)

3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp:.

Authorization No.:. 110 526 South Church Street. Charlotte. NC 28201-1006 Address Býr tion Date: IN/A

4. Identification of System

5. (a) Applicable Construction Code 11ASME III 1,9E Edition, FSum.merandMEWter... Addenda,~ FN/A- co&:.Caw (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition M2000 Adda&_

(c) Applicable Section )a Code Case(s) 1NIA

6. Identification of Co nents Corrected,. ASMECode.

Nameof Mam1bZtUw National Other Year Component Serial No. Board No. Ida3fification Built or No)

Name of Manufitctwo 19=76 Y, 1SV25 Valworth 371 865 A

_j T

7. Description of Work Rwlaced ComDonent/Part/AD Additional Description ac ge in valve I SV25.

8. Tests Conducted: Hydrostatic M Pneumatic C Nominal Operation Pressure ampt Oth& Pressure " PSI Týs. .tTemP.-= oF.

Description (Optional):

FORM NIS-2 OwNER'S REPORT FOR REPAIRIREPLACEME ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet i. of E Component Line Size: !6 .in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: 1MCFI-ISMI5 & ISV3 Flow Diagram No(s).: MCFD.1593-01.03 Support/Restraint Sketch/Drawing No(s).: fN/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: I I Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XM.

Type Code Symbol Stamp IN/A Certificate of Authorization No. IN/A 1 Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Datel'April 13 , 20 MEi I Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina nd employed by Hartford Steam Boiler Inspection & Insurance Compay of of Connecticut have inspected the components described in this Owner's Report during he period.

-*- 6 2 ito 1i'-fi2/__,

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisigfmt connected with this inspection.

I]F swan 1 2 f - -&--- - . -Commissions JNB IB1473-NC21524, N-**1 ,

S nspector's Signature 1 f National Boa, State, Province, and.Emiorsemaits

/1 DatW.--- -Z' -'-V

-- i, 202D f-A

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enera, Carolinas. L]LC Date -5/20/2013 526 South Church Street. Charlotte. NC. 28201 . Sheet. 1 * . of 2 Address

2. Plant McGuire Nuclea Station Unit I 12700 Hauers Fe rrv Road. Huntersville, NC 28078 2007131-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerav Ca trolinas. LLC Type Code Symbol Stamp: MN/A Name Authorization No.: .N/A 526 South ChurcIhStreet. Charlotte. NC 28201-1006 _ N-/A Address Expiration Date:

4. Identification of System SV - Main Steam Vent to Atmosphere

5. (a) Applicable Construction Code ASME III i 19.1 Edition,, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Components ____________

7. Description of Work Replaced Comnonent-/Part/Anvurtenanmc e Additional Description Replaced plug in valve ISVI

8. Tests Conducted: Hydrostatic r Pneumatic F' Nominal Operation Pressure F Exempt r, Other F Pressure PSI Test Temp. :OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1

9. Remarks (Should Include the Following Information, as Applicable): Sheet ,2 of ' 2 Component Line Size: 6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-ISV3&4 Flow Diagram No(s).: MCFD-1593-01.03 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

IType Code Symbol Stamp N/A Type Code Sym......................

... ................................. :....................... .................. -i-Certificate of Authorization No. N/A Expiration Date :N/A Signed FL Grass, Quality Assurance Technical Specialist D20 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina employed by 'and Hartford Steam Boiler Inspection & Insurance Company .of Connecticut have inspected the components described in this Owner's Report during the period 4 i: * -i .. ..... to - l./ /2 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne 's Report. Furthermore, neither th pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection Commision NB I 1473-NC 1524, N-I SInspector's Signature' National Board, State, Province, and Endorsements Date / 5 / ,20L"

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTVIITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerev Carolinas. LILC , ' Date 5120/20:13 I 526 South Church Street Charlotte. NC. 28201 Sheet ; of 2 r%¥UU

2. Plant McGuire Nuclear Station Unit I Name 12700 Ha2ers Ferry Road. Huntersville. NC 28078 2007506-01.

Address Work Order # (or Repair/Pleplacemjat Organiztion P.O. No., Job*No., etc.)

3. Work Performned by Duke Enermv Carolinas. LLC Name Type Code Symbol Stamp: N/A.

AuthoriZation No.: *N/A-- . .

526 South Church Street. Charlotte. NC 28201-1006 ,N-A ./

Address

O

.sh.......... . . . .. Expiration Date: .:. . ..... ..... .... .:... .... . .... ... . ..: .........

4. Identification of System SV - Main Steam Vent to Atmosphere

5. (a) Applicable Construction Code ASME 11I .- 192L Edition, Summer and Winter Addenda, -..

Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 ind 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Comr nents ' _ _ _ _ _ _.....__ _-

" o: e:t4-.' ASME Code Name o0 Manufcturr National Otheror .".'..stampe Component Name of Manufacturer Serial No. Board No. Idenifi.ca.on Built . ste(Yes.or No) 1SV 13isv ..... Babco.k

.Babcock & Wilcox .......

&"Wilcox*.. 15958-2.3..........176....19.

i TiV File# i076 I ,177 Corected : ,Y I.......e s,

7. Description of Work Replaced CQomonent/Part/Anourtenance Additional Description Replaced plug in valve 1SVI3

8. Tests Conducted: Hydrostatic F Pneumatic F Nominal Operation Pressure P-1, ExemPt r Other r Pressure *PSI Test Temp. "

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet*ý " of:

Component Line Size: '6 in. (nominal) System Class: . . ASME

...... ... .. .... Class

.. . . . .. .... .... ... 2

. ... ... . : ....... .. . ...... .. . . ......... 1-.. ... .- .. .. .. .. .. *. . ...

Weld Isometric Drawing No(s).: MCFI-isV3 &4.

Flow Diagram No(s).:

Support/Restraint Sketch/Drawing No(s).:

MCFD-1593-01.00 N/A

.............. * ............. * ;- - 7 ,:.-... -..... ... j-.1 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: -: .. - ......- .. .. .

Applicable Manufacturer's Data Reports to be attached CERTIFCATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section ..

Type Code Symbol Stamp :N/A Certificate of Authorization No. N/A ExpirationtDate...NA Signed FL Grass, Quality Assurance Technical Specialist .. . . Date M 20,20i **

Owner or Owner's Designee, Titde I ,' *w°"""° ° WT, " ,... .: :: ::::::. : : : iI.:,

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure.Vessel Inspectors and the State or Province of .. :

North Carolina .andemployed an em lo e by,. ýHartford Steam Boiler Inspection & Insurance by ' Company

" . ..- .." . . of

of Connecticut have inspected the components described in this Owners s Report during the 04r*

to -and state that to the best of my knowledge and belief, the Owner has performed examn*ations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XM.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective mea sur described in this Owner's Report. Furthermore, neither the ins~tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kiiid arising from,* connected with this inspection.

JF Swan 1/ . /. Comm i nsqinn NBI1473-NC1524,N-I Inspector's Signature V Mational Board, State, Province, and Endorsements D tel :1 20L3

FORM NIS-2 OWNER'S REPORT FOR REPAIRUREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke I:nermv Carolinas. Ll LC Date V521/2013 2

526 S outh Church Street. Charlotte. NC. 28201 .of 2Sheet Address

2. Plant McGuire Nuclear Station Unit I Name 12700 Haers FerTv Road. Huntersville..NC 28078 2011716-0i Address Work Order # (or Repair/Replaeement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Ener2v Carolinas. LLC Name Type Code Symbol Stamp. lN/A Authorization No.: N/A . ... .

526 South Church Street. Charlotte. NC 28201-1006 WT!A Address Expiration Date:

4. Identification of System 'ND -Residual Heat Removal

5. (a) Applicable Construction Code ASMEIII .. 19 - Edition, .Summer a-d Wint 1Addenda; I-IA Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Comr nents '__" c____ct___,

. ______d Name of Manufacturer National Other Year Corrected,or Removed, ASME Code Stamped Component Seral No. Board No. Identification Built Installed (Yes or Name of Manufactur-er* *.. No)

IND30 rth A0210 N/A N/A 1973, Corrected Yes W-".. -'--

- ' -l--' -

m IA

' 1 . ... ......

... , .... "l .. .. ...... -. ........ ' .... , .-... l *... ...

7. Description of Work we, )laced Comoonern/Part/Ap2Urtenance Additional Description ;R ,placed bolting material in the bad to bonnet on valve IND30

8. Tests Conducted: Hydrostatic r[ Pneumatic r- Nominal Operation Pressure E, Exempt r Other M Pressu= L PSI Test Temp.: iF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code: Section XI.

9. Remarks (Should Include the Following Information, as Applicable): 2 Sheet off2 Component Line Size: 8 -. in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI- IND3 1 . .. . ... .. . ....

Flow Diagram No(s).: MCFD-1561-01.00 .. . . . ,

Support/Restraint Sketch/Drawing No(s).: "MCSRD-NDA-001.

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: . .

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. 'N/A Expiration Date IN/A Siigned FL Grass, Quality Assurance Technical Specialist -- Date May 21 20iL..

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1I,the undersigned, holding a valid co.mmission issued by the National Board of Boiler and Pressure Vessel psors and the State or Province of

&InsuraceeCompany. of North Carolina ...... an emloe by iHartford Steam Boiler Inspection and employed .y &I -s .

m--of Conc t ........ have inspected the components described in this Owner's Report during the period to andstate that to the best of my knowledge and belief, the Owner has performed examintins and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described

[in this Owne 's Report. Furthermore, neither , Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising mror connected with this inspectioyI JF Swan Commissions NB I 1473-NC.1524, N-I I - s Signature Inspector' fNational Board, State, Province,. and Endorsements:_

IJ/ S i ,* ,,k

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerfyv Carolinas LI Date 4/13/2013 s2A qojith rhivri -.h rtr,_gt Charlotte, NC 28201 Sheet . of 2 Address

2. Plant McGuire Nuclear SStation Unit I Name 12700 Ha2ers Fer v Ro*flHuntersville. NC 28078 .2026124-08 Address Work Order # (or Repair/Replacenent Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerav Carolinas. LLC Name Type Code Symbol Stamp: ;N/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 !M/I A Address Expiration Date: :" "

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASMEHI ; 19!7.L Edition, iSummer andWinter Addenda, !N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Corn pnents .-

Cor"cTted, ASME Code Name of Manacture National Other Year Removed, or Stamped.

Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

NV System :Duke Energy ZN/A i3N/A 1981 Corrected Yes lNV491 Borg Warner 18005 -. N/A55 N. . ! 976 Re 1976 __RemovedYes

.,2 ... 7/....Y 1NV-491 Flowserve 69BLM 12274 N/A ,, Inst-led--e

7. Description of Work Replaced ComponentPar/ApMurtenance Additional Description Replaced valve INV491 and it's piping per EC 110428

8. Tests -Conducted: Hydrostatic F Pneumatic [ Nominal Operation Pressure FF Exempt F' Other F Pressure . SI Test Temp...

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisionsof the ASME Code Section XN

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2L. !of2 Component Line Size: ;2 in. (nominal) System Class: ASME Class 2*.

Weld Isometric Drawing No(s).: MCFI-INV172 & 175 Flow Diagram No(s).: .. F...5.5............03. .

46 . ..

Support/Restraint Sketch/Drawing No(s).: ;N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC:1I0428 Applicable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XM.

Type Code Symbol Stamp N/A Certificate of Authorization No. !N/A . Expiration Date N/A SignedFLGrass, Quality...Assurance Technical Specialist .Date *April*

1-3 . = 20 U Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of North Carolina and employed by lHartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

'to ! CO-L-n/

, ./ . i. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from/connected with this inspectio IF S Commisio NBI 1473-NC1524, N-I.

/National Board, State, Povinc, and Endorements

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinags LLC Date 13/27/2013 526 South Church Street. Charlotte. NC. 28201 Sheet [IL I of Address

2. Plant McGuire Nuclear Station Unit I Name 12700 Haoers Ferry Road. Huntersville, NC 28078 !26.34i6-21 I Address Work Order # (or Repak/Replacement Organization P.O. Noý Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: IN/A Authorization No.: IN/A 526 South Church Street. Charlotte. NC 28201-1006 .. . ,A Address Expiration Date:

4. Identification of System SM M ain Steam - - .. .. ........... -I A n Code Case

5. (a) Applicable Construction Code AS . 111 .ME 1 19,j12 Edition, Sumer andWinter Addenda, L . Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Corn onents Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No) ofNouktu Corrmte 1uMCA-SM-141 EnergN/A A i/ Corrected ho

... .. ~.....

."..... ...... ... ......... .............. ...... .. . .....-. I.-....- ..-... ...--- I*

. ~ ~ ~ __ - --- ~-----

-- _____ i ____________

7. Description of Work Renlaced Component/Part/AgL urtenance Additional Description Replaced pivot pin on hanger IMCA-SM-141.

8. Tests Conducted: Hydrostatic E Pneumatic E Nominal Operation Pressure C] Exempt F* Other 1] Pressure Test Temp. = OF

_._PSI Description (Optional):- -

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XM

9. Remarks (Should Include the Following Information, as Applicable): Sheet *of2 Component Line Size: F36 in. (nominal) System Class: A Weld Isometric Drawing No(s).: IN/A Flow Diagram No(s).: 9--3--,0-1-.00,-

Support/Restraint Sketch/Drawing No(s).: IMCA-SM-141 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: IMCSRD-SMA-005 Applicable Manufacture's Data Reports to be attached CERTIFICATE OF COM[PLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section MI.

IType Code Symbol Stamp (N/

Certificate of Authorzaio No. N/i.~.--~.---*.--- Expiration Date N Signed IFL Grass, Quality Assurance Technical Specils Owner or Owner's Designee, Title DatelMa rch 27 i 20F13 l CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

'North Carolina - and employed by riartford Steam Boiler Inspection & Insurance Company .. of Conecicut . .have inspected the components descibed in this Owner's Report during the period

.. Z- -. to i - -*z "., and state that to the best of my knowledge and belief,. the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the s r nor his employer shall be liable in any manner for any personal Wijury or property damage or a loss of any kind arising from or-nnected with this inspection.

'IF Swanl ~ Commissions Iiii 43.C124 N- .

National Board, State, Province, and Endorsements

FORM.NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1

1. Owner fluke Fnerov CRrnhinrm'~ Ti LC Dilke P-ray Caroling T- Date _ _5/2013_" . .. s . 1.

526 South Church Street( Charlotte. NC. 28201 A AA__..

Sheet FL] of

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road. Huntersville. NC 28078 12034426-43 ... 1 Address Work Order # (Or Repair/Replacement Orgamization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC f Name Type Code Symbol Stamp: IN/A . I 526 SouthChurchdSressCalte N22110 Authorization No.: N/A I 1 Address Expiration Date: IN/A.

4. Identification of System !NV - Chemical and Volume Control

5. (a) Applicable Construction Code [ASME III 1 19[E Edition, is eand Witer- Addenda, IN/A ICode Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XM Code Case(s)

6. Identification of Co onents Corrected,. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacmrer Serial No. Board No. Identification . BUilt: .m!!ed (Yes rNO)

,i MCR-NV-954 n N/A- . N/A, _ . _ AlCrre, r976ded M'___

- _ - -.... . ,-_,-- , 1

. ....... ... .. .. . . .. . .. . ...... _.J.Ii _ ... ...

.. ..- ----- . . . .. . . . . . . . . .. . . . . . . . . .. . . . . .. .- " l" .. i 1 L .1 L

"___ _ _ _ _ _ _ i__ 1W _ _ _ _ _ _ _ _ ____

______ __ ___ ___ ___ ___ __ _ L l__ __

7. Description of Work Replaced Comnonent/Part/Annutance Additional Description -

lRenlaceA holtin*

--- material- on harmer

- - 1MCR-NV-954 - at snubber .I

!Rt-nlacedb tina material onhanper IMCR-NV-954 at snubber

8. Tests Conducted: Hydrostatic Cl Pneumatic 7. Nominal Operation Pressure E] Exempt.t Other "Pressure ]PSI Test

' Temp. =OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/EPLACEMENT ACTAIITY As Required by the Provisions of the ASMEE Code.Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet F2_1~of[2 Component Line Size: 12 Jin. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: IN/A Flow Diagram No(s).: iMCFD-1554-01.00 ___________________

Support/Restraint Sketch/Drawing No(s).: IMCR-NV-954.

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: F _

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XM.

Type Code Symbol Stamp !N/A... ......... ............. . *. ... *.,_.i * *" _I Certificate of Authorization No. IN/A Expiration Date .N/A Signed.FL Grass, QualityAssurance Technical Specialist Date APr5 ' 26F Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

'North Carolina and employed by IHartford Steam Boiler Inspection & Insurance Company [of

)Connecticut have inspected the components described in this Owner's Report during the period Sto and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspection.

Swan J6 lzNB1) 14ý73-NC 1524, N-I 7 Inspector's Signature 1-7 National Board, State, Province, and Endorsements Date 20[Z

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Cod Section XI

1. Owner Tlukae Rnierav ('nrnlinne T1LC Date 4/17/2013 526 South Church Street. Charlotte. NC. 28201 Sheet L of 2 AAA-d~

2. Plant McGuire Nuclear Station Unit I1 Name 12700 Hacerm Ferry Road. Huntersville NC 2R078 .2034834-17 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code Symbol Stamp: 'N/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: ,N/A

4. Identification of System NC - Reactor Coolant

5. (a) Applicable Construction Code ASME11 19............,

9 i , mn dd ... a A..er Activity 1998 Edition with the 1999 and 2000 Addenda (b) Applicable Edition of Section XI used for Repair/Replacement (c) Applicable Section Xl Code Case(s) N/A

6. Identification of Corn onents Corrected, ASMECode Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

SG 1A B&W 770104 157 N/A 1996 Corrected Yes

. . . . . .. .. . .. . . . . . .. . .... . .. . .. . . . ... . . . .. . -. .. . .. .[

7. Description of Work eiae Cmoal Vnurenc Additional Description Replaced Manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC 10 1520.

8. Tests Conducted: Hydrostatic r7 Pneumatic r- Nominal Operation Pressure F, Exempt rF other r- Pressure: -. PSI Test Temp. OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet, 2 of 2 Component Line Size: N/A .

System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: .MCFD-1553-100..

Support/Restraint Sketch/Drawing No(s).: ;N/A - . . . .. .

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC101520 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

TType Code Symbol Stamp N/A Certificate of Authorization No. !N/A . Expiration Date 'N/A Signed FL Grass, Quality Assurance Technical Specialist Date APril*17 17, 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall beliable in any manner for any personal injury or property damage or a loss of any kind arising from or nnected with this inspection.

JF Swan I..L, 7L. 2 /. "Commissions NB I1473-NC 1524, N-I Inspector's Signature National Board, State, Province, and Endorsements Date - -4"/- / "" , 20.

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Fnerriv (2arnlina~.

Duke...E y....

T 1LC Yin, ,L "Caml Date i4/i7i03 ..

526 South Church Street.

Street Charlotte, NC. 28201 Sheet_1 of 2 526 South Church Address

2. Plant McGuire Nuclear Station Unit I.

Name 12700 Hagers Ferry Road. Huntersville. NC 28078 2034835-17 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: 'N/A Authorization No.: N/A 526 South Church Street Charlotte. NC 28201-1006 Address Expiration Date: N/A

4. Identification of System NC - Reactor Coolant

5. (a) Applicable Construction Code ASMEII.I. 19. Edition, iSummer and Winter 'Addenda, NIA Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 200 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Com pnents Corrected, ASME Code Name of Manufitmm National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or.No)

SG1B B&W 769301 .146 N/A 1996 Corrected Yes i . . ...... ..........

.. .. .. ....... * . .. ..... .......... z*- ... ................. .................................---.........

7. Description ofWork = n.y A~uut5.. ~ S~~~muju~ipu Additional Description Repl aced Manway nuts with Hydra nuts (utc# 206322) on Steam Generator per ECi01520.

8. Tests Conducted: Hydrostatic ' Pneumatic . Nominal Operation Pressure -F Exempt F Other F Pressure. PSI Test Temp. F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of.

Component Line Size: N/A ;in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: .MCFD.1J-.3-. - -

Support/Restraint SketchlDrawing No(s).:- A .

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: ECI(l120 " " . i

... ..p..c..

. . . . .... ........ .... Da.a.....

.Applicable Manufaeturr's Data Reot to be attaced ".

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A

.,,Ni: . - . . .. . . "

Certificate of Authorization No.N/A ___________________ Expiration Date INIA:

Signed FL Grass, Quality Assurance Technical Specialist -: . . . Date APr 720L :

Owner or Owner's Designee, Title II h

CERTIFICATE OF INSERVICE INSPECTION

[,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure-Vessel Ins-c sandthe State or Province of

'North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company.. of Connecticut have inspected the components described in this Owner's Report during the period

-to. -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Rýeport in accordance with the requirenents of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concernmg theexaminations and corrective measures described in this Owner's Report. Furthermore, neither the ctor nor his employer shall be liable in any manner for any persoial injury or property damage or a loss of any kind arising from o onnected with this inspection.

_. S .Commissions :NBI 1473-NC1524, N-I

/In,-spector'sSignaeNational

. Board State, Provmce, and Endorsements Date* .... (7 /? ......... 2023 ... . ... '...*.+."".

FORM NIS-2 OWNER'S REPORT VOR REPAIR/REPLACEMNENT.ACTIVITY As Required by the Provisions of the ASMEtCodeSectionXI 3

1. Owner Duke Eneray Carolinas. LI Date *4/172013.

526 South C~humnh Stmet Charlotte. NC. 28201 Address Sh2t -

2. Plant M2Guire Nuclear StaionUnit Name 12700 Havers Farrv Road. Hunersville, NC 28078. ;2034836-17 I

Address Work Order # (or Repair/Replacement ion P.O. No.,.Job No., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code Symbol Stamp:: ...

AuthorizationNo.: !N/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: N/A -'

4. Identification of System NC - Reactor Coolant i ~ ~~ ~ ~ ~ ~ ~. . .... . ................

. v :'., "".:'."..

5. (a) Applicable Construction Code ASME ElI .92j. Edition iSumimer and Winter -. - Addenda,-INiA Code: ase (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Components "

7. Description of Work Rei laced Componenti(Part/Annurtenance Additional Description Replaced Manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC 101520. ..

8. Tests Conducted: Hydrostatic F Pneumatic F Nominal Operation Pressure P1 Exempt r-' Other. f Pressure!. PSI: Test Temp. .

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2. of 2 Component Line Size: N/A . (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: !MCFD-l 553-01.00 Support/Restrait Sketch/Drawing No(s).: "N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: ECo101520 Applicable Manuftcturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp :N/A Certificate of Authorization No. 'N/A Expiration Date !N/A Signed FL Grass, Quality Assurance Technical Specialist -------- Date April 17 20.

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartfrd Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

~~3...+/-Lz22..t 0 /L2.2 3L... and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrctv measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.

JF Swan 'Commissions NBII473-NC1524,N-I IeeNational Board, State, Province, and Endo0ments Date 2_________Z3_______

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke-Enermv Carolinas. LI Date 4/1712013 526 South Church Street. (Charlotte. NC. 28201 Sheet j.I of .2 A AA-.

2. Plant McGuire Nuclear Station Unit I Name 12700 Ha~ers Ferry Road. HuntersviLle. NC 28078 2034838-17 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC II Name Type Code Symbol Stamp: :N/A Authorization No.: ýN/A .

526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: ýN/A

4. Identification of System NC - Reactor Coolant

5. (a) Applicable Construction Code ASME III 19_.7 Edition, Summrand Winter Addenda, IN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Com,,nents ...... _ _._

Coneted, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

SG ID B. & W -"---N/A 1996 Corrected 1996'/701027154-- Yes

. : *. .... .. . ... *. ...:__- _ .*_-

_il.- .- _i..i.. ." . .. ... ......" i.. *... .* .... ... ... _.-*.----.

7. Description of Work Rmlaced Comonent/Part/Awur=ance Additional Description Replaced Manway nuts with Hydra nuts (utc# 206322) on Steam Generator per EC101520.

8. Tests Conducted: Hydrostatic r7 Pneumatic r Nominal Operation Pressure rt' Exempt r Other r- Pressure PSI Test Temp. -OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as App Sheett2 of 2*_2 Component Line Size: N/A in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCMh-1553-Ol.00.. .

Support/Restraint Sketch/Drawing No(s).: A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC101520 .-. -

A l * ": *: . io Applicable Manufacturer's DataRcports to be attached ..

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. 'N/A Expiration.Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date April 17 "M203 Owner or Owner's Designee, Title CERTIFICATE OF.INSERVICE INSPECTION.

1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vsl ctors andthe State or Province of North Carolina .. and employed by iHartford Steam Boiler Inspection & Insurance Company . , off.

Connecticut. have inspected the components described intliis Owner'&Report durýpg the period..

Conetiu have the copnnsdsrbd nti we' eor uigtepro

...... -..... i~ to ..... -7 *-- and state that to the best of my knowledge and belief, the'Owner has performed examinations.and takennnpce cortive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinatins and correctivemieures .desribed in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner, for any personal injury or property damage or a loss of any kind..

arising f-om/f connected with this inspecti.

/

JF Swan / CowmssionsBl*473-NClS24, N-I ., '

Dae Date 41~Inpectoe SgnatureNaonlBadSttPcncndEdsent "0 National Boa4 State, ProviWel a6d EDdo.ruments

FORM NIS-2 OWNER'S REPORT FOR REPAiR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinas. L LC Date 4/2/2013 526 South Church Street. Charlotte. NC. 28201 Sheet l of AAA-..

2. Plant McGuire Nuclear Station Unit I Name 12700 Havers Ferry Road. Runternville NC 2R07R 12035065-02 -,

Address Work Order # (or Repair/Replacement Organization P.O.,No, Job No.,-etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: IN/A ...1 Authorization No.: .N/A 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: ANis

4. Identification of System ýNc-Reactor Coolant

5. (a) Applicable Construction Code-ASME II" ] 19121 Edition, Summer and Winter , Addenda, N A CodeCse, (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section X) Code Case(s) IN/A 7

6. Identification of Com nonents_' "_"_-

ASME.Code Coirrced, . :o.r Stmi.*e.d.

Namepof Manufacturer National other Yeare %moved,.or Component Name of Manufacturer Serial No. Board No. Identification Built Installed. (Yes or No)

NC S/G 1A (B) jDuke Energy . . . N/A Corret i . ..!.!.

....---...-.... . - - -............-- w_ __ _ ........... . . .. .. . Z. . . . . .,I

-.......... ..... . ........ II

.... ... . . ....... . ..... - _ _ __ __' i_ _ __ ___ _ _

7. Description of Work Replaced Co=onwt-TAgL&M=awe Additional Description !Revlaced control valves 4 & 5 in S/G IA (B) Lateral sulport "southern snubber" I

8. Tests Conducted: Hydrostatic [ Pneumatic 17 Nominal Operation Pressure 17 Exempt F[ " Other M] Pressure L___JPSI Test.Temp.::= F Description (Optional): ,

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet

of F2 Component Line Size: IR/A -Jdin.(nominal) System Class: AM Class 2 Weld Isometric Drawing No(s).: ýN/A Flow Diagram No(s).: IN/A .

Support/Restraint Sketch/Drawing No(s).: N/A .11 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

! .I Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COM[PLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASM.E Code, Section MI.

Type Code Symbol Stamp /

Certificate of Authorization No. It .. ..... . ... . Expiration Date Signed YFL Grass, Quality Assurance Technical Specialist Date April2 - , 20 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel ectors and the State or Province of i-North Carolina and employed by Hord Se Boiler Inspeon & Insnce Company I of

_Conneticut __ have inspected the components described in this Owner's Report during the period 1 * - ZL/--c Ito - and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and.corrective measures described, in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Inspector's Signatre A' -~ ICom!issons 1NB1 473-NC1524, N-National Board, State, Province, and Endorsements Date_ _ 20__

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner Duke Enerzv Carolis. LLC Date 4/12/2013 526 South Church Street. Charlotte. NC. 28201 Address Sheet . of

2. Plant McGuire Nuclear Station Unit I Name 12700 Haer Ferry Road. Hurtersville. NC 28078 2039111-03 . .. . . . . . . . i iI Address Work Order # (or Repair/Replacement Organizaion P.O. No., Job N6.,'etc.)

3. Work Performed by Duke Enemy Carolinas. LLC T Name Type Code Symbol Stamp:

526 South Church Street. Charlotte. C 28201-100uthoriti Auhrzton No.: IN/A Address Expiration Date: ,N1 ..

4. Identification of System N- Safety Injection

5. (a) Applicable Construction Code 'ASME M . 19fL2 Edition, iSummer and Winter Addenda, [NACode Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity !998 Edition with the 1999 and 2000 Addenda ... ...

(c) Applicable Section XI Code Case(s) N/A .. J-U. u ~ n ~~AL~j. .. * .. .. . ..

Comated, : ASME.Code:

Name of Manuficturer National oh .year, . Removed, or. " Stamped .

Component______ Name of Manufacturer Serial No. Board No. Identification Built Installd (Ye or No) 1NI60 ....... W--iValworth ~ AO13/4.)I 0 . _ N/A " . i, 4 Correte ... :Yes.

_--1 L*_ _

7. Description of Work Additional Description iRepiaced disc and bl-1ng materil invlv1N60

8. Tests Conducted: Hydrostatic C' Pneumatic I Nominal Operation Pressure 2] Exempt m'* Other [r Pressure L PSI Test Temp. OF Description (Optional): Ir

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet L_.of Component Line Size: '......

l Comon e ie:

- in. (nominal) System Class: AS Iass1 Weld Isometric Drawing No(s).: !MCFI-INI79 Flow Diagram No(s).: iMCFD-1562-02.00 Support/Restraint Sketch/Drawing No(s).: ?NA 1 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufcturer's Da= Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp iN/A Certificate of Authorization No. 1N/A Expiration Date IN/A Signed !FL Grass, li-ty AsurnceTehnical Spcialist ., . . Date .April 12 ;20L .

Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Irh Caroi _ _ and employed by 'Hartford Steam Boiler Inspection & Insiuance Company . of

.Connecticut have inspected the components described m this Owner's Report during the penod

--- 3 30 "-- 3*---to "- . ,., and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.

Commis INBI 473iNC1524, N-I geaw aBdoa, S tAt.P rovinc and Endorsa Inpcte Sp tueNattoui Dat - .. / - - .. . .. 20 '

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enemy Carolinas, LI C Date 4/9/2013 526 South Church Street. Charlotte. NC. 28201 Sheet I Address

2. Plant McGuire Nuclear Station Unit I Umt...:. .. .

Name 12700 Haners Ferry Road. Huntesville, NC 28078 !2039899-02 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enemy Carolims. LLC Name Type Code Symbol Stamp: N/A 526 South Church Street. Charlotte. NC 28201-1006 Authorization . No.: -N/A - .. . . i *7 Address Expiration Date: r.'

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASME II. 19.ZL Edition, Surmer and Winter Addenda, MNA Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Comp~onents

7. Description of Work Reulaced Comnonent/PartAnourtenne Additional Description Replaced valve INV6

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure P3 Exemptr Other r- Pressure .-PSI_ Test Temp. I. OF Description (Optional): ---------- .

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet : 2 of !2 Component Line Size: :3 x 4 in. (nominal) System Class: ASME Class 2.

Weld Isometric Drawing No(s).: MCFI-1NV53 Flow Diagram No(s).: MCFD- 1554-01.02 Support/Restraint Sketch/Drawing No(s).: 'N A - - ...... ............ ...-.. .... . .......... ..

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: .

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMEPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

TType Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date IN/A Signed: FL Grass, Quality Assurance Technical Specialist AP 9 "..-"..DateAprl.,20 1 l Owner or Owner's Designme Tide CERTIEFICATE OF INSERVICE IENSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspetr n the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company o Co n n c t i u t ave i ns ecte th co non nts des ri be i n t hi Ow er' Rep rt uri g t e p ri o Connecticut have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinatis and ta.n co measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owneý Report. Furthermore, neither the pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fron_/) connected with this inspection.

IJF Swan I ,,* 7-.. Commi.cionne NBI 1473-NC1524, N-I.

National Board, State, Province, and Endosements

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke EneMy Carolinas. LLC Date 43/31/2013 526 South Church Street. Charlotte. NC. 28201 Sheet 1 of !2 Address

2. Plant McGuire Nuclear Station Unit I Name

.12700 Ha~er Ferry Road, Huntersville, NC 28078 2039905-06 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enemy Carolinas, LLC T,,nm rMj- ,nýUIi 4tam. N/A.. . .

Name Authorization No.: iN/A I 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: "

4. Identification of System SV. - Main Steam Vent to Atmosph . .. . . .. . ...

5. (a) Applicable Construction Code iASME m . 19,7L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) ýN/A

6. Identification of Cop onents Corrected. ASMECode Name of Manufacturer National Other Year Removed, or . Stamped Component Name of Manufacturer Serial No. Board No. Identification Built installed (Yes or No)

IMCA-SV--17 .Duke Energy.N/...N/-A - .N/A N-/A Corrected No

~

S................. ...................

.~~; ... ..... ........

7. Description of Work Replaced CoMoonent/Part/Annurt-enance Additional Description Replaced stud and nuts in the pipe clamp on hanger IMCA-SV-17

8. Tests Conducted- Hydrostatic r- Pneumatic r- Nominal Operation Pressure r-,

Exempt FF Other r- Presure t - SI -.-

Test Temp. L.......F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIRJREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet L of L

Component Line Size: ý6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: *MCFD-1593-01.03 Support/Restraint Sketch/Drawing No(s).: iA.'* .. . .7 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: - . .

Afpplicable Manufacture's Data Reports to be attached CERTIFICATE OF COMPLIANCE-I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp I;N/A. . ---------.... . . .... ..... .

Certificate of Authorization No. N Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist .. ... .. ,.. -..-. .. . t77- - 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel 1Isectors and4 the: State or Provin~ce of North Carolina an mlydb artford Steam Boiler Inspection & Insurance Company o

,Connecticut have inspected the components described in. this Owner's Report during the period:

to~ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section MI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the e-xam~inat-ions and ýcorrect~iv~e measures deicribed in this Ownr', Report. Furthermore, neither the ector nor his employer shall be liable in any mane for any personal injury or property damgeo a loss of .any kn arising frm connected with this inspection.

Comisin NBI1473-NC1524, N-I . -

Inspetor' SigntureNational Board, State. Province, and Endorsemnents flt

..... T-- *

/

,P

-F I 2v

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enemy Carolinas. L]LC¢ Date 4/17/2013 526 South Church Street. Charlotte. NC. 28201 Address Sheet I -of.

2. Plant McGuire Nuclear Station Unit Name 12700 Hagers Ferry Road. Huntersville. NC 28078 :2039906-06 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enemy Carmoin*s. LLC Name Type Code Symbol Stamp: ýN/A Authorization No.: !N-A 526 South Church StreetdR201-1006 Chartte~ N Address Expiration Date: !N/A

4. Identification of System SA - Main Steam Supply to Auxiliary Equipment

5. (a) Applicable Construction Code ASME II . . . . . 191 Edition, S.ummer and Winter INA Addenda, Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Com onents Corrcted, ASME Code Name of Manufacturer National Other Year Removed, or Stamped.

Component Name of Manufacturer Serial No. Board No. Identification Built Inst" (Yes or No)

IMCA-SA-19 Duke Energy N/A IN/A N/A N/A Corrected No

,, j .. ,,

!_, . .. .. -,..,.... ... . . . . . . .. . ... ... :.. " . . . .... .. ... ...... !........ . -j -----...

~ ~~

.. ... ~ ~ ~ ~. ~

. . . . . . . .... ~.. . . . .. . ... ........ . .

.all .

7. Description of Work Replaced Comnonent/Part/Anourtenance Additional Description Replaced rod and nuts on hangeri MCA;-SA--19... .. . ..

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure r Exempt other r-O Pressure :PSI Test Temp. OF 1l3veiinrlnin {(Ontlni~nfl" .

Desnri-tion((" tionall:

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 21 iof 2 "

Component Line Size: ý6 'in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1593-0 .1.00 Support/Restraint Sketch/Drawing No(s).: .1MCA-SA-19 Other Applicable Information (e.g., W.Q. No., EC No.) if not included elsewhere on NIS-2 Form: ;MCSRD-SAA,-00l1 -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certif that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp ýN/A Certificate of Authorization No. N/A Expiration Date !N/A Signed FL Grass, Quality Assurance Technical Specialist~ Date -April17 :20L-.

Owner or Owner's Designee Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Insptors and!the State or Province of N Carolina .Hartford Crth a Steam Boiler Inspection & Insurance Company of I

Connecticut have inspected the components described in this Owner's Report during'the period 4.5/-- -i,2 3 "to" and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section X).

By signing this certificate neither the Inspector nor his ployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the In,6ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from 7 onnected with this inspection. /.

JF Swan /NBI 1473-NC 1524, N-I Inspector's Signature " National Board, State, Province,-and Endorsements Date C 20Y.3

FORM NIS-2 OWNER'S REPORT FOR REPAIRiMPLACEMoENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinas. L LC 4Date

/16/2013'.

526 South Church Strowt Charlotte. NC. 28201 Sheet j.1.' .. of 2 Address

2. Plant McGuire Nucleai SStaion Unit I Name 12700 Haters Ferry Road. Huntersville. NC 28078 :2039923-06 Address Work Order # (or Repair/Repacement Organization P.O. No., Job No., etc.) .)

3. Work Performed by Duke Engr= Carolin. LLC Name Type CodeSymbol Stamp: NI 7":

Authorization No.: INIA 526 South Church Street. Charlotte. NC 28201-1006 ..... __*_ /A. I**-7,77-77'"/

Address rzxpuauon late: -.

4. Identification of System ND - Residual Heat Removal

5. (a) Applicable Construction Code ASME I.. 19.1. Edition, SummerandWmter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Corn onents,-__.._._,-

Corrected, ; ASME.Code Name of Copnn Manufacturer National other eRmoved, or .

InstaUalledy Stamped or No)

Component Name of Manufacturer Serial No. Board No. Identification Built Duke Energy N/A "MCR-ND-500 N/A.i Corrected No I MCR-ND-500 Duke....

Energy.............. Ii/ ....................... A. ......... ... ........-.......

..i N.A........ ........... ~ ~ . .. ...-.

7. Description of Work Renlaced Comnongnt/PaWtAourtenance Additional Description Modified item number 8 on hanger lMCR-ND-500.

8. Tests Conducted. Hydrostatic 17 Pneumatic F Nominal Operation Pressure r, Exempt F: Other r! Pressure' PSI Test Temp.. .... F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet .. of I Component Line Size: 14 in. (nominal) System Class: ASME Class I1 Weld Isometric Drawing No(s).: N/A. .

Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: IMCR-ND-500 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD- . . .. . .".-. .

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section 3a.

IType Code Symbol StampN/

Certificate of Authorization No. ýN/A Exiaio aeN/A Signed FL Grass, Quality Assurance Technical Specialist -DtApi6,2013 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inpcorad h taeo Proine of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

-2 ".-Ž-Z 0to I.L .... iand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described-in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ".

IF Swan -Commissions -NBI1473-NC1524, N-I DateNational Board, Sta'e Province, and Endosments Date __..._______ .. 20Of?

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XM

1. Owner Duke Enemy Carolinas. LLC Date 4/13/2013

, , I 526 South Church Street. Charlotte. NC. 28201 Sheet[. of 2l Address

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road. Huntersville. NC 28078 [ý0ý2399-01 ______ _____

Address Work Order # (or Repair/Replacement Organization P.O. No, Job No., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC. Type Code Symbol Stamp: N .

Name Authorization No.: _N/A_

526 South Church Street, Charlotte. NC 28201-1006 N/A Address Expiration Date:

4. Identification of System !NV - Chemical and Volume Control .

5. (a) Applicable Construction Code ýASME III - 19ij Edition, iummer and Winter Addenda, rg/XA -- ý Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A !,

6. Identification of Com onents Correctd,' ASME Code Nameof Manufacturer National Ote Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed. (Yes or No)

- o02 .... . r CK8-8 ] 4235 iN/A 4.974j Corrected Yes T}r:rzztzrm zznz L___

7. Description of Work Renlaced Component/Part/Aomurtenance Additional Description iReplaed disc in valve INV1002.

8. Tests Conducted. Hydrostatic r-- Pneumatic rJ Nominal Operation Pressure 2] Exempt r Other [] Pressure L -=PSITest Temp. = OF Description (Optional): I 1

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the.Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet r2 71 ofClas1 Component Line Size: r.n.. (nominal) System.Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-.l-NV157 Flow Diagram No(s).: CFD-1554-01-.03 Support/Restraint Sketch/Drawing No(s).: IN/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: F I r

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section MI.

IType Code Symbol Stamp ItN/A -

Certificate of Authorization No. ____________________ Expiration Date 1/

Signed LGrss, QaiyAssurance Tecnial Seialit Owner or Owner's Designee, Title I I7Z Date Ii nil 13 1,20913 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of iNorth Carolina Nand employed by )Hartford Steam Boiler Inspection & Insurance Company . of

Connecticut have inspected the components described in this Owner's Report during the period F --

"1-3 .( Ito L- Z - , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's P.nort. Furthermore, neither the Inspec nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or ected with this inspection.

.ommissions iNB11473-NC1524,N-I ctor's Signature National Board, State, Province, and Endorsements Da/Zi-/21X

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY I Oinc As Required by the Provisions of the ASME Code Section XI Duke I. . rny Carolinas. LIC Date 3/30/2013 P.lOwner 526 South Church Street, Charlotte, NC. 28201 Sheet of2 2');Plant McGuire Nuclear Station Unit I Name 12700 Haaers Ferry Road, HuntCrsville, NC 28078 2045621-02 Address \Vork Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)

13. Work Performed by Duke Ener,_v Carolinas. LLC N/A Name Type Code Symbol Stamp:

Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 S-- " .I ./A Address Expiration Date: . .*.

4. Identification of Syst.:11 KC - Component Cooling System

5. (a) Applicable Construction Code ASME III 1971j Edition, ISummer and Winter Addenda, :N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Sectin XI Code Case(s) N/A

6. Identification of Coin ponents __ _ _._ _.... .......

Corrected, ASME Code Name on Manufacturer National Other Year Removed, or Stamped Component Serial No. Board No. Identification Built Installed (Yes or No)

Nanme ol"Manutheturer Y e._s i1344Kerotest K 1KC344Ker"te" TD2-25

' 8586 . .N.iN/A: A .........

96Cnctd:

1976e............

1KC344... 19.......... t1d. Y6:

.T ... . . . ,

4 4 .1. ,4-4 4

_ 1 _ _ _ _ __ _ _ _ 1 1 .1 _

7. Description of Work placed Component/Part/Appurtenance Additional Description Replaced disc in valve I KC344.

8..Tests Conducted: I- ,drostatic Pneumatic FI Nominal Operation Pressure F1 Exempt F Other

......... - Pressure ...

PSI~S .. .

Test

.T ...

e s Temp. i

-Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI S9. R:emarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal) System Class: ASME Class 2

Weld Isometric DrawingNo(s).: MCFI-IKC116& 117

,Flow Diagram No(s).: MCFD-1573-03.QQ Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE.

I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date /A Signed FL Grass, Quality Assurance Technical Specialist .41, Date March 30 .. 20.L*L Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period S 91 - 7-1-" to 3 'and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore. neither the Inspec nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from oonetdwith this inspection.

JF Swan ommissions NBI 1473-NC1524, N-I SSigntureNational Board. State. Province. and Endorsements Date ,20-0

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinas. LILC DDate 3/29/2013 7 Charlotte. NC. 28201 '1 Address Sheet of..

o

2. Plant McGuire NuclearrStation Unit I" Name 12700 Haaers Fe rrv Road. Huntersville. NC 28078 [f2045641-04 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp:

Authorization No.: 1N/A "_

526 South Church Stree Char-lotte. NC 28201-1006 . ... . . A Address Expiration Date:

4. Identification of System SM - Main Steam

5. (a) Applicable Construction Code ASM* fIII ...... ] 19121 Edition, ISunmmer and Winter IAddenda, / Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A -

6. Identification of Corn nents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No) 1 SM95 .Kerotest TEGI -1 "20402 11N/A _ _1977 Corrected Yes Ii I*

--,--.,-.-i<_

7. Description of Work Add New ComnonentlPartAtiurenance/Weld Additional Description Replaced disc and bonnet on valve 1SM95.

re

8. Tests Conducted: Hydrostatic fl Pneumatic EC Nominal Operation Pressure El Exempt r Other [] Pressure =JPSI Test Temp. =-OF Description (Optional): F-

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet L of Component Line Size: .. in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: IMChFSM14-&-27 Flow Diagram No(s).: IMCFD-1593-0.03 Support/Restraint Sketch/Drawing No(s).: [/

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: F Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp 1W/A Certificate of Authorization No. INIA Expiration Date [N/A Signed FL Grass, Qality Assurance Technical Spcialhst i Date l-arc-h29-, 20[l Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION

[,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina employed by arf°rd Steam Boiler Inspection & Insurance Company rdand I of Connecticut- ----.-

have inspected the components described in this Owner's Report during the period

.' .I to L / and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o onnected with this inspectionh.e ST-Swan- J= - - ]Commissions INBi 1473-NCl-.524, N-I spector's Signature National Board, State, Provincem and Endorsements DeI I

FORM NIS-2 OWNER'S ItEPORT FOR REPAIR/REPLACEMENT ACTrivTY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energv Carolinas. LI S".Date 4/17/2013 526 South Church Street. Charlotte, NC, 28201 Address Sheet ýI of 2

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road. Huntersville.,NC 28078 2046263-06 Address Work Order # (or Repair/Replacement Organization P.O. No, Job No., etc.)

3. Work Performed by Duke Energv Carolinas. LLC Name Type Code Symbol Stamp: i:N/A Authorization No.: IN/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: N/A

4. Identification of System NC - Reactor Coolant i"

5. (a) Applicable Construction Code ASME .IIISummer 1971.. Edition, ad Winter Addenda, IN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6 Identification nf Cam nnente Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manucfar Serial No. Boaxd No. Identification Built Installed (Yes or No)

INC2 Crsy - see other id 30 N56925-00-0006 111974 Removed Yes 1NC2 Crosby ,-seeother id . 52 N56925-00-0007 T1978 Installed Yes

-.. 2 C rosby I i _ _ _ _ _

S-. . - --..

7. Description of Work Replaced Component/Part/Axurtenance Additional Description :Renlaced valve 1NC2

Renlaced valve INC2

8. Tests Conducted: Hydrostatic r. Pneumatic r Nominal Operation Pressure F .. Exempt r Other F Pressure PSI Test Temp. :OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 2

9. Remarks (Should Include the Following Information, as Applicable): Sheet i of 21 -11" Component Line Size: .6 . in. (nominal) System Class: ASME ClamI Weld Isometric Drawing No(s).: MCFI-INC5 Flow Diagram No(s).: MCFD-1553-02.00 . ..

Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacture's Data Reports to be attached CERTIFCATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.

IType Code Symbol Stamp N/A-Certificate of Authorization No. 'N/A Expiration Date N/*A

]Signed FL Grass, QualityAssurance Technical Specialist Date -]-- "--,20t13 Owner or Owner's Designee, Title CERTIFICATE oF INSERVICE INSPECTION.

1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel tors and the State or Province of North Carol-.and employed by 'Hartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

"- ..... 2 /to, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

JF San .......

... Commissions!NBI 1473-NC 1524, N-I Inspetor' SigntureNational Board, State, Province- and Endorsemnents

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enermy Carolinas. LI C Date 4/9/2013 I.

526 South Church Street. Charlotte. NC. 28201 Shet of 2 f

526 South Church Street Address

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Haperq Fer-rv Rnad- Munteimwille NC 2R07R !2054451-09 Address Work Order # (or Repair/Rzplacement Organization P.O. No., Job No;, etc.)

3. Work Performed by Duke Energv Carolinas. LLC NameTyeCdSyblSap Type Code Symbol Stamp: _I_/A_ ......

Authorization No.: ýN/A..,

526 South Chuch Street. Charlotte. NC 28201-1006 A .: ...- _.._.. ........ _ ..

Address Expiration Date: IN/A " "

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code I4SMEM M 191. Edition, ISummer and Winter. Addenda, iNIA - Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Cop onents _

! ' . Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No) 1MCRNV 1261 Dk Energy .. ...

......i N/AN/ IA__

_ /J CorrectdN

......... ~~~~

.... ..... ]

! i~~~~~~..

.. ij .. .... ..

7. Description of Work Add New ComoonentlPart/Annurtenance/Weld Additional Description lReplaced items I and 4 on hanger IMCR-NV-1261 per EC103109-.-,,.- -

8. Tests Conducted: Hydrostatic F Pneumatic C Nominal Operation Pres sure E Exempt [- Other E Pressure I- PSI Test Temp. riOF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisi~ns of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheetl22 01 of Component Line Size: i2 in. (nominal) System Cliss: ASME Class 2 Weld Isometric Drawing No(s).: *N/A-Flow Diagram No(s).: MCFD-1554-01.00 Support/Restraint Sketch/Drawing No(s).: !1MCR-NV-1261 I

a Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere onNIS-2 Form: !MCSRD-NV-24F -___________________

.- ~---.-~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms tolthe requirements of the ASME Code, Section XM.

Type Code Symbol Stamp .N/A Certificae .. .. . .... . .........-. F-.-..i.onN...........

Certificate of Authorization No. iN/A Expiration Date N/A.

Signd iFL Grass, Quality Assurance Technical Specialist i Date tApril9 1,2071 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION

[, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel ctors and the State or Province of

!North Carolina and epoyed by jHartford Steam Boiler Inspection ..

& Insurance Company of o f.

S................n..... . . . .. ..... . . ... . . .. .. .... ...... .. . ..... . .. . . . . .. l e m lo e b y Connecticut

,t have inspected te components described in this Owner's Report during the period

I to 7-..- r2"% ,and state that to the best of 'myknowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of he ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind mrising from or connected with this inspectio iFSwan 1-cwnommini. NB 1473-NC1524,N-I.

Inspector's Signature [- National Board, State, Province, and Endorsemnts Date 220 1

FORM NIS-2 OWNER'S REPORT #OR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisibns of the ASME Code Section XI

1. Owner Duke Enerm Carolinas. LLC- Date 415/2013 526 South Church Street. Charlotte. NC. 28201 Sheet

of Address

2. Plant McGuire Nuclear Station Unit .1 Name 12700 Hawers Ferry Road. Humterville. NC 28078 12064076-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enermy Carolinas. LLC Name Type Code Symbol Stamp: 1N/A Authorization No.: IN/A 526 South Church I Streeti Charlotte.

II II NC 28201-1006 m[] F r I I i [ i KT*^IA Address Expiration Date: I'"'

4. Identification of System NV - Chemilcal and Volume Control

5. (a) Applicable Construction CodeeASMETIU 19,Lf Edition, [SLum rter Addenda, !R/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1948 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A I

6. Identification of Con onents Corrected, ASME Code:

NaMamerf r Nationalof Removed, or Stamped Component Name of Manufacturer Serial No. I Board No. Identification Built .lstall.. (YesorNo) 1NV29 Kerotest IEE9-18 711531 __N/A 1975 Corrected Yes

..............~~~~~~~~~ ......... .. ..... .. .. . .7 = : . ..

.......~~~~~~~~ . Ii_

- -- - -- --- f7 - -- _

rl.... .. .. .......

... ... . ...... . . ....... . ... ........ . .*I .. )

L! J Ii-

.. ................. ." 7______"___ __

4_____________ ___

7. Description of Work Renlaced Comtonent/PartAgAp U ce Additional Description lReplaced disc in valve 1NV29.

8. Tests Conducted. Hydrostatic F. Pneumatic E Nominal Operation Pressure E] Exempt ( Other 17 Pressure I PSI Test Temp. = O]oF Description (Optional): i

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet LJ of 1'2]

Component Line Size: 2 in..(nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: fMCFI-1NV16 I

Flow Diagram No(s).: IMCFD-i51554-OIM0 Support/Restraint Sketch/Drawing No(s).: 7 ON/A Other Applicable Information (e.g., W.O. No., EC No.) iffnot included elsewhere onNIS-2 Form: r .

Applicable Manufactuitr's Data Reports to be attached CERTIFICATe OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A . 77.

Certificate of Authorization No. IN/A Expiration Date N/ J Signed !FL Grass, Quality Assurance Technical Specialist I Date APril 5 , 2013 Owner or Owner's Designee, Title CERTIFICATE OF JNSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

'North Carolina and employed by Hartford Steam Boiler Inspection.& Insurance Company of

',Connecticut have inspected the components described in this Owner's Report during.the period 1-3 to 1,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or.nnected with this inspection.

SwCammiqinn SJFwa L *--'

- w

. -'5---- I 1473-N12 I...-......

Inspector's Signature - IBoard, State, Province, and Endorsements Date - , 20122

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMTY As Required by the Provisiohs of the ASME Code Section XI

1. Owner Tliik- Fnerov Crnmlinn T Date 4/17/2013 . . ... ...

526 South Church StreetI 2 526~~~

Sot CuchSret Charlotte. NC. 28201 Shet I of

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road. Huntersville. NC 28078 :2064077-11 Address Work Order # (or RPair/Replaceement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energv Carolinas. LLC Name Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 _i . kT/ A Address . .....~~....... Expiration Date:. .. ... . .. .. ... .. ... :

4. Identification of System NV - Chemical and Volume Control ......... ...

5. (a) Applicable Construction Code ASME Im 1921 Edition, ;Summer andWinter. Addenda, :NIA Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity IEMiton1998 wit the 1999 and 2000 Addenda (c) Applicable Section X1 Code Case(s) N/A

6. Identification ot Corn onents Co.....ed ASME Code Name of Manufacturer National other Year Removed, or Stamped Component Name of Manuflcure Serial No.

Board No. Identification Built Installed or(Yesr No)

NV System Duke Energy .N/A 37 N/A1981. Co Yes INV45 Kerotest TADF6-3 5851 N/A

.. t1975 Removed Yes INV45 BW - IP 97EP0303 N/A N1997 .Yes install..

7. Description of Work Rgl laced ComnoneV/Part/Anpurtenance Additional Description R4eplaced valve INV45 and the piping around it.

II

8. Tests Conducted: Hydrostatic r Pneumatic r Nominal Operation Pressure F: Exempt r Other r Pressure 'PSI Test Temp. "OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code: Section X3 2

9. Remarks (Should Include the Following Information, as Applicable): Sheet of _.

Component Line Size: .2 in. (nominal) System Class: ASME Class 2 WeldIsometricDrawingNo(s).: 'MCFI--- - -..

Flow Diagram No(s).: MC]FD-1 554-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section X.

Type Code Symbol Stamp N/A " .

Certificate of Authorization No. N/A Expiration Date [NA Signed FL Grass, Quality Assurance TechnicaiSpecialist .... Date Apr il.1 7 ,20 13 Owner or Owner's Designmee Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina Hartford Steam Boiler Inspection,& Insurance Company .... : . . of Connecticut have inspected the components described in this Owner's Report during the period

_3 Z .-.1 -to- ,- . 7, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Reort. Furthermore, neither the Insp or nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or ected with this inspection.

JF Swan :Commissions ;NB11473-NC1524,N-I Inspector's Signature National Board, State, Province, and Endorsements Date ___________________. 201'3 20 . . ..

FORM NIS-2 OWNER'S REPORT FOR REPAR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI.

1. Owner Duke Energv Carolinas. LILaC N.Date "4/17/2013" Charlotte. NC. 28201 Sheet i-2.".of.2-- .

r0f; Rmith Chtirrh Strmq twufI"

2. Plant McGuire Nuclear Station Unit .1 Name 12700 Hagers Ferry Road, Huntersville. NC 28078 2064077-23.

Address Work Order # (or Repair/Replacement Organization P.O. No4 Job No., etc.)

3. Work Performed by Duke Energv Carolinas. LLC Name Type Code Symbol Stamp: IN/A.

Auth No.: IN/A Authorization .. "/"

526 South Church Street. Charlotte. NC 28201-1006 i7pr u nu w ......-... . ....- .. . ....

Address~.. .. x la o ~ w '. ...............

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code III 9L Edition, Summer and .ASME -N/A .Addenda, C

(b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and2000 Addenda.- ......

(c) Applicable Section XI Code Case(s) N/A j.*. JI uLuL*Bu Ul UJ i M.A.M*. *U ...

Corrected, ASME Code Name of Manufacturer National Other Yearor Stamped Component Name of Man,,hctrer Serial No. Board No. Identification Built Insled orN)

A ,-i 'e : '. N-o" 1MCRNVI265 Duke Energy 'N/A N/A ,- N/A , , ./A ICorre.."..I ..

~~. ,.! ..

.... . . . .. i . .. . . . .. .. . .. .... . . I . .. . .... .. .. ... . . ...

7. Description of Work Ren laced CoMonent/Part/Annurtenance Additional Description Mc)dified hanger IMCR-NV- 1265.per EC 109922

8. Tests Conducted: Hydrostatic . Pneumatic .r Nominal Operation Pressure F Exempt Fe Other r" Pressure VPSI Test Temp.1 -°F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 12 Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1 554-01.00 .

SupportlRestraint Sketch/Drawing No(s).: MRNV15.....- - - -- -

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC109922 . *-.

Applicable Manufacturer's Dama Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XL Type Code Symbol Stamp N/A Certificate of Authorization No. !N/A Expiration Date N/A .

Signed FL Grass, Quality Assurance Technical Specialist- ---------------- -----. Date April7'. 20L Owner or Owner's Designee, Title

.. U p

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler andPPressure Vel.Inspectors and the State or Province of North Carolina .and employed by Hartford Steam Boiler Inspection & Insurance.Company, of Connecticut have inspected the components described in this Owner's Report during the period

. " / Rto Z - -- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section X.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne 's Report. Furthermore, neither Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from ir connected with this inspectio Sa -. Commissions NB 1 1473-NC 1524, N-I IeeNational Boar",State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVIY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerev Carolinas. L]LC Date 4/9/2013 106 Rnijth rh~imi-h qtreret Charlotte. NC. 28201 Sheet 1I of 2 AA

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road. Huntersville. NC 28078 !2064078-05 Address Work Ordcr # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by rl~iakn& Fn av C G2nt n r r Name Type Code Symbol Stamp: :N/A Authorization No.: N/A N/A.... . . ... . . ... .. ' . ... . . ..

526 South Church Street. Charlotte. NC 28201-1006 Address Expiraton Date: . -

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASME i1 . . . .. 191L Edition, Summer and Winter Addenda, 1N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Corn nents Name ofCorrected, ASME.Code Name of ManufacmUIe National Other Year Removed, or Stamped Component Name of Manufhcturer Serial No. Board No. Identification Built Installed (Yes or No) 1MCR-NV-825 Duke Energy i~~ ~~N/A~...................... N/A MA Corrected No:

~~~~. . ... . .. ....

... ...J

i m T

7. Description of Work Rci)Llacd Comj*on=nL/Par/Ayyrtean Additional Description Rewelded support strap to hanger lMCR-NV-825

]

8. Tests Conducted:- Hydrostatic F Pneumatic r- Nominal Operation Pressure r Exempt Other ri rssr PSI Test Temp. 1OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): 2 Sheet of"2 Component Line Size: 2. (nominal) System Class: ASME Cass"2 Weld Isometric Draw.g No(s).:*

Flow Diagram No(s).: MCFD-1554-01.01 Support/Restraint Sketch/Drawing No(s).: *pMlR,'..825 -

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: .McsR=- g=002 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XM.

Type Code Symbol Stamp N/A Certificate of Authorization No. iN/A Expiration Date iN/A rss ul*

TindF Specialit echncal '...... _................Dte"' .- 7......................................

SignedwFL Grs, Quality Assurance Tesigneeiatl Date' April 9 2.*L.*

Owner or Owner's Designee, Title

i

'3 CERTIFICATE OF INSERVICE INSPECTION I the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inq s_!ors and the State or Province of.

North Carolina .. and employed Hartford Steam Boiler Inspection& Insurance Company. of Co~nnecticut . -~- ----. - .- -have . inspected the components described in this Owner's Report during the period.

l /3 to /'7L Z(..9 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied,. concerning the examinations and corrective.measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss.of any kind arising from connected with this inspection.

JF Swan Ii.. -- /.*Commissions NB11473-NC1524, N-I Inspector's Signature " National Board, Stale, Province, and Endorsements . *.

Date ~ /~ 2OL-3

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code.Setion XI.

1. Owner Duke Ener-v Carolinas. LLC J7Date f 3/.' ...

=, !

526 South Church Street. Charlotte. NC. 28201 Sheet"*L.'.LJof Address

2. Plant McGuire Nuclear Station Unit. I Name

...,. ....7 12700 Hagers Ferry Road. Huntersville. NC 28078 .2064078-13 Address Wok Orda # (or Ppair/R*plaement Orpantion P.O. No., Job No., etc.)

3. Work Performed by Duke Enerey Carolinas. LLC T Code Symbol Stamp: fN/A Name * . ar' . . ,

Authorization No.: !N/A 526 South Church Street. Charlotte, NC 28201-1006 " " " NA 7" "

Address Expiration Date: !N/A*

4. Identification of System !NV- Chemical and Volume Control .,---" A-~

1

5. (a) Applicable Construction Code A=SME [ - 191--Edition, ISumrmer and.Winter Addenda, . Code .Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999-and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A ...

6. Identification of Comronents Co....t d, ASMECode Name of Manufacturer National Other Year RSD)ovd or. : talmed Component Name of Manufacturer Serial No. Board No. Identification Built.: ( o No)

.,~~... . " ""@ .' . .Y" NV System - Duke Energy 1N/A '137 J.- 9j Co"rce Yes 1 .NV61

.. .... ... ....,EE9-61EKerotest . . ... .117521...N/A

/ ... . Hl97S!e-Ye 1NV61 MW / IP 97EP0304 IN/A / _ 997 italled:

S.. .. . .. . .. . . .. . .. . . . ,. ..... .... . ...........

S.

,o ii U

7. Description of Work Renlaced Comnonent/Part/A enanoe Additional Description (Replaced valve 1N-6"iand piping J

8. Tests Conducted: Hydrostatic f Pneumatic r Nomnial Opera, iPressu= Exempt r Other L7 Prmssure PSI Test Temp6 IZZOF Description (Optional): !D( " : ,. . , ..~ ] ::.

~~...

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XN

9. Remarks (Should Include the Following Information, as Applicable): Sheet t2 'of Component Line Size: 2 ............... (nomina1) System Class: ASMiC1_a_ _

Weld Isometric Drawing No(s).: MCFIINV35 i I

Flow Diagram No(s).: iMCFDr-1554-01.01 Support/Restraint Sketch/Drawing No(s).: jN/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

.1 Applicable Manufanarer's Dama Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp :N1A Certificate of Authorization No. N/AExpiration Date A Signed FL Grass, Quality Assurance Technical Specialist -Date .Aprl14 ", 2[

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina-- I employed by Hirford Steam Boiler Inspection & Insurance Company of Connecticut ._ have inspected the components described in this Owner's Report during the period

. z.--.. -- _Jto;, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's eport. Furthermore, neither the Inspetor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from 0 *nrected with this inspection.

JF Swan O 1 o .,.'nm m ,o ,,, !,.L/"

NB11473-NC1524. N-I Inspector's Signature " r National Board, State, Province and Endorsemtents Date ( 20&

FORM NJS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Secton XI

1. Owner I~nhi-r 1Fnerov Cgirnhinne T1LC Date 4/9/2013

. 526 South Church Street ICharlotte. NC. 28201 Sheet I_.. of 2 AdrCmS

2. Plant MoGuire Nuclear Station UnitI Name 2064078..7.. .. .. ... .. ..... .......

12700 Hagers Ferry Road. Huntersville. NC 28078 .2064078-17 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: IN/A Authorization No.: :N/A 526 South Church Street. Charlotte. NC 28201-1006 A . . . . . .. .. . . . ...... ..

Address 1Xpw[uon LaUun:

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASME LU 19L-L Edition, Summer and Winter Addenda, !N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Copents Corrected, ASMECode Name of Manufacturer National Other Year Removed, or Stamped Component Name of Man,,rer Serial No. Board No. Identification Built Installed (Yes or No)

IMCR-NV-826 -Duke -Energy N/A N/A tN/A N/A Corrected No Enrg __ _

7. Description of Work Ra wlaced Chaonentart/AnCurtena-82 Additional Description -welded hanger I1MCR-NV-826

8. Tests Conducted: Hydrostatic F Pneumatic r7 Nomina Operation Pressure . Exempt rF Other r Pressure _ PSI Test Temp. -OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): SheetL. of, 2J ..

Component Line Size: :2.... in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: :MCFD-1554-01.Ol Support/Restraint Sketch/Drawing No(s).: IMCR-NV-826 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCS*1l-N-08 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF"COM.PLINCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.

FType Code Symbol Stamp 4N/A Certificate of Authorization No. :N/A Exi atinDte-Signed :FL Grass, Quality Assurance Technical Specialist Date1'-,20 11.

OwDaer orpril O D'1ne T Owner.

e ' or Ow Title. ,,.gn ...::*::..:...:. .:.i. ::.: .. .::

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel IRp-tors and the State or Province of North Carolina Iand employed by Hartford Steam Boiler Inspection.& Insurance Company *.' "..

Co n n c t i u t ave i ns ect e t h co pon nts des ri be i n t hi Ow er' Rep rt uri g t e p roo Connecticut have inspected the components described in this Owner's.Report during the. period

.to.. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XM.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concernin.g the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Ip.~pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspection.."

JF Swan /_L -/

Inspector's

.& - , UL....-I--.......-.... NBI 1473-NCIs24 N-I .........-....

National Board. State Pwoviame and Endorsemets Date ; r *,20 >

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energv Carolinas. LLC Date f/5/2013 526 South Church Street. Charlotte. NC. 28201 Sheet 5 ofo Address

2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferny Road. Huntersvidle, NC 28078 ~264079-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energv Carolinas. LLC T Code Syol Stamp [N- -I Name Type Sym p. "

___IJ Authorization No.: .NA 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: fN/A

4. Identification of System INV - Chemical and Volume Control

5. (a) Applicable Construction Code ASME II ] 19i Edition, !Summer and Winter j Addenda, Cde CN/ACase (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda _..

(c) Applicable Section XM Code Case(s) N/A

6. Identification of Corn onents..______t_ ,_.__A____________"Code.

Corrected, ASME Code Name of Manufacturer National Other Year Removed, or I Stamped...

Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

"NV77 iKerotest .LA44-12 8700 N/A 1119761 Corrected . *Yes

.. ........... ............. .. ... r.. I..

7. Description of Work Replaced Component/Part/Atourtenance Additional Description jReplaced disc in valve 1NV77. -fl

8. Tests Conducted: Hydrostatic E Pneumatic [7 Nominal Operation Pressure 2] Exemot [E Other 1] Pressure L_= PSI Test Temp. Z IJ F * ..

Description (Optional): I . ,

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet oof Component Line Size: 2 i. (nominal) System Class: AS.MI Clas 2 Weld Isometric Drawing No(s).: IMCFI-1NV16 .

Flow Diagram No(s).: iMCFD-1554-01.01 "

Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: ___

Applicable Manufacturer's Data Reports to be attached CERITI CATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp IN/A Certificate of Authorization No. )N/A ------ Expiration Date IN/A Signed IFL Grass, Quality Assurance Technical Specialist "-Date Apr 5 . 20 F13 Owner or Owner's Designee, Title CE RIFIC EOFINSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Nor .thC.aroli.na - an mlye y artford Steam Boiler Inspection & Insurance Company of

.Connecticuti have inspected the components describied in this Owner's Report during the period El-- Ito ----5-- -, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's keport in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r oncted with this inspectio Swan Commissions I1473-NC1524,.N-1 -l. '

0/ Inspector's Signature-* National Board, State, Province, and Endorsements a

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinas L ..C Date 4/17/2013 526 South Church Street.

Charlotte. NC. 28201 Sheet 1 of 2 A AA--.

2. Plant McGuire Nuclear Station Unit I Name 12700 Haiers Ferry Road. Huntersville. NC 28078 :2077097-05 Addres Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by D~uku. Ftiemv C'rftmiic rr r Name Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 - . . . . MIAi Address Expiration Date:

4. Identification of System NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASMEI - 192L Edition, :Summer and Winter Addenda, 'N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Com onents ..

Corrected, ASME Code Name of Manufacturer National Other Removed, or Stamped Component Name of Manutfcturer Serial No. Board No. Identification Built Installed (Yes or No)

NV System Duke Energy N/A :37 N/A 1981 Corrected. Yes 1NV46 Kerotest OCA4-3 ' . 14833 N/A 1977 Removed Yes 1NV46 Flowserve E990A-2-2 2355 N/A 12000 i Installed Yes

7. Description of Work Re1vlaced ComgRonent/Part/Apurteance Additional Description Rýeplaced valve 1NV46 and the piping around it per EC 110469.

8. Tests Conducted: Hydrostatic " Pneumatic r Nominal Operation Pressure I Exemptr Other [- Pressure PSI Test Temp. OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of :

Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-INV38 Flow Diagram No(s).: MCFD-1554-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC110469 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

IType Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date.N/A Signed FL Grass, Quality Assurance Technical Specialist Date ýApril"17 _,1201-3 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in.this Owner's Report during the period:

- - and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Riport in accordance with the requirements of the ASME Code,.Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspec"io JF Swan ... Commissions .NBlI473-NC1524,N-I..

Is r SNational Board, State, Province, and Endorsements

!Date, 20L,..

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMTY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enerav Carolinas, LI Date 2/12/2013

~26 ~n~ith Chnri2h gh~eet ( harlotte, NC, 28201 Sheet 1 of_.*

526 South ChrchStee Shee f__

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road, Huntersville, NC 28078 P2081817-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: !N/A Authorization No.: fN/A 526 South Church Street, Charlotte, NC 28201-100O Address Expiration Date: 4/A

4. Identification of System NI - Safety Injection

5. (a) Applicable Construction Code ASME III 192,L Edition, JSummer and Winter- -Addenda, V/A - Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 7N/A

6. Identification of Corn onents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed .(Yes or No) 1MCA-NI-249 Duke Energy 20977 N/A N/A !N/A Reroved No

1MCA-NI-249 Duke Energy '38508 .. 'N/A - N/A ' N/A Installed No

.... r . . .. . . . . . . .. . . . ... *.. . . . . . ,

. .. . . . . . . . . .. . .. . .. . . i 1: : . . .. .. . ... ... . . . . . .. .. . : ... ..... .. .. . .... '........ .... .... ....

7. Description of Work Rev laced Component/Part/Appurtenance Additional Description Re placed snubber and it's bolting material on hanger IMCA-NI-249.

8. Tests Conducted: Hydrostatic IT Pneumatic F Nominal Operation Pressure F Exempt F Other r 7 Pressure -PSI Test Temp. !OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAI/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet of j2 Component Line Size: 4 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1 562-03.00 Support/Restraint Sketch/Drawing No(s).: I1 MCA-NI-249 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

tMCSRD-N.B-002-Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist \ .ui Date jFebruary 12 ,2013*

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

'2t .z" iL-/ .. 'to ~~z. ] . r -"/ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section X1.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from, connected with this inspection.

I JF Sw*-*J an ' !/* *-- " i .i..: " -'.......mm.s.ions. ................. .. ". . . . .' ... -

JF SWCommissions :NB I 1473-.NC 1524, N-I-

/

Inspector's SignatumNational Board, State, Province, and Endorsements

[ate 320

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XN

1. Owner DukeE nemry Carolinas. LILX Date 5/28/2013

[

526 Sc,uth Church Street. Charlotte, NC. 28201 Sheet of

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road. Huntersville. NC 28078 2082255-01 ,1 Address Work Order # (or Repair/Replacement Organization P.O. No, Job No., etc.)

3. Work Performed by Duke Enenzy Carolinas. LLC "

Name Type Code Symbol Stamp: IN/A Authorization No.:: ./A .

526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: IN/A

4. Identification of System INI - Safety Injection

5. (a) Applicable Construction Code 1ASME EI . 197 Edition, Summer and Winter J Addenda, IN/A Code Case.

(b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2(00 Addenda (c) Applicable Section XI Code Case(s) IN/A 7

6. Identification of Corn nents __ _....._'__._ ....

. Corrected, ASME Code Name ofManuf r National Other Year Removed; or " .Stamp6d.:

Component Name of Manufacturer Serial No. Board No. Identification Built installed (Yes orNo)

[IMCR-NI-658 Duke Energy 115696 N/A I/

IN/A " / I Removed nsale N ,

'1MCR-NI-658 Duke Energy 38351 . N/A N Istalled oNA F *. . ... . .

I ___ [1 7I . ___ _________ .. . .___

7. Description of Work Renlaced ComoonenVtPart/Aiopurtenance Additional Description fReplaced snubber on hanger 1MCR-NI-658.

8. Tests Conducted: Hydrostatic r- Pneumatic r Nominal Operation Pressure [1 Exemp~t P3 Other [r Pressure [= PSI " Test Temp. -____OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEM[ENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet L of Component Line Size: ii-- in. (nominal) System Class: AMEass 1__ _

Weld Isometric Drawing No(s).: IN/A Flow Diagram No(s).: M D-.5. ..

Support/Restraint Sketch/Drawing No(s).: IIMCR-NI-658 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRPD-ND-Oi02 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp IN/A Certificate of Authorization No. N/A 1 Expiration Date AN/ A""

Signed -FL Grass,_Quality Assurnace TechnicalSpecialist Date IMarch 28.. 20f 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

'North Carolina an eplye b 'arfrd Steamn Boiler Inspection &-Insurance Company of ZConnecticut have inspected the components described in this Owner'sReport during the period i..-Z-- "3]to - -3 7and State that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning theexaminations and corrective measures described in this Owner's *eport. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or nnected with this inspection.

-]CmINB1473-NC1524,N-I Commiassio Board, State, Province, and Endorsements o a SinatureNational DateiI M22,

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section 3a

1. Owner Duke Ener~v Carolinas. LI L~C Date j3/28/2013 Duke Enemv Carolinas 1 57A Rmith rhirtnh Str&'qpt Charlotte. NC. 28201 Sheet i of Address

2. Plant McGuire Nuclear Station Unit I Name

1 12700 Hauers Feirrv Road. Huntersville. NC 28078 12082257-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enerey Carolinas. LLC Name Type Code Symbol Stamp: 1NIA Authorization No.: IN/A .

526 South Church Street Charlotte. NC 28201-1006 . . -/

Address Expiration Date: "

4. Identification of System BE-Steam Generator Blowdown Recycle...................--.".".".

5. (a) Applicable Construction Code 'ASME m I 19[2I. Edition, lSummer-and Winter 1Addenda, [N/A l Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000.-Addenda (c) Applicable Section XI Code Case(s) N/A " .

6. Identification of Cop onents ._.

Corrected,. ASME Name of Manufacturer National Other Year Removed,. or '"::" Sn... Code j.

Component Name of Manufacturer Setial No. Board No. Identification Built Isaled (Yes or No)

IMCR-BB-662 ------....... ..

r ....

"ble-Fnerg..1120742 '

-- i-- ----. --

N/A __ N/A __

/A RemovedI -

IMCR-BB-662 !Duke Energy F-38513* FN/A LNN/A ___ IN_

7. Description of Work Renlaced Comnonent/Part/ADpurtenance Additional Description JReplaced snubber on hanger 1MCR-BB-662

8. Tests Conducted: Hydrostatic ... Pneumatic . Nominal Operation Pressure r-7 Exe mpt F Other r- Pressure L ... PSI Test Temp. Ij 10F Description (Optional): I

' = I

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet L of 1'2 Component Line Size: I2

i. (

System Class: ASME Class 2 Weld Isometric Drawing No(s).: A . . .

Flow Diagram No(s).: 1MCFD-1580-01 .00 Support/Restraint Sketch/Drawing No(s).: '

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: r 1.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp IN/--- ----- . ......

Certificate of Authorization No. IN/A .... -i Expiration Date IN/A .

Signed FL Grass, Quality Assurance Techncal Specialist . Date {March 28 1,201*:L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of

North°- aroina-- and employed by [Hartford Steam Boiler Inspection & Insurance Company o of

~ ~ ~

Connecticut ~ ~ ~ ~ ~~ haeminpected n thboy nnsdsrbe nti we' epr ui2tepro lConnecticut have inspected the components described in this Owner's Report during the period

~3z.......L3.O"~~-~-* -to L.' -, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspecti JF Swan .z't _ c~neNBi74C54N- i National Board, State, Province, and Endorsements

- Inspector's Signature",[

Date - ,20LLý'

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Enery Carolinas. LIL.C Date 526 South Church Street. Charlotte. NC. 28201 Address Sheet L of.

2. Plant McGu1re Nuclear Station Unit 1 Name 12700 Haver* Ve Rnad- Mhniterqville. WC 2R07R 12082695-02 Address Work Order # (or Repi*/iReplacanet Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enermv Carolinas. LLC Name Type Code Symbol Stamp: IN/A i Authorizi No.: N/A 526 South Church Street. Charlotte. NC.28201-1006 - . .. . fiNTA' Address Expiraton Date:.

4. Identification of System NV - Chemical and Volume Control. --

5. (a) Applicable Construction Code IASME III i191I Edition, 9.um ImeWand " " ] Addenda, IN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A "

6. Identification of Com nents Co*eted, ASME Code.

Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturr Serial No. Board No. Identification Built Installed (Yes or No)

.NV229 Dresser TG70821 11910 IN/A 1986 e Yes 1NV229 Dresser TE_0905_1 . 1262

.. N/A I 9 .... Yes 1NV229~~~. __ _ _____ ___ _

.-.. -.- - - . . .. . ....-...-. ~

... ....... j I ii

7. Description of Work Replaced Com~oncn/AtmHece Additional Description Replaced valve INV229

8. Tests Conducted: Hydrostatic f Pneumatic r- Nominal Operation Pressure R1 Exempt (7 Other 1]l._.PSi Pressure Test Temp. [Z OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi

9. Remarks (Should Include the Following Information, as Applicable): Sheet [ of 1'--7 Component Line Size: Tfl-i 2 , in. (nominal) System Class: A, .. MEIa .

Weld Isometric Drawing No(s).: ,V j. /4 Flow Diagram No(s).:

Support/Restraint Sketch/Drawing No(s).: FN/A I

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form:

I Applicable Manufacturh's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp fN/A -

Certificate of Authorization No. 1F"'-k -- Expiration Date I/

Signed [FL Grass, Quality Assurance Technical Specialist Date [AprIi I, 24i7L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by lHartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

- ----- to! . L3 and state that to the best of my knowledge and beliefC the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or nnected with this inspection.

.JF Swan .... *----, .-- - Commissions iNBI 1473-NC1524, N-I inspector's Signature /'7 National Board, State, Province, and Edomrsmnts

]

)

L

FORM NIS-2 OWNER'S REPORT FOR REPAEIRREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1.Owner Duke Enemy Carolinas. Li L . Date :3/31/2013 526 S'outh Church Street. Charlotte. NC. 28201 Sheet 1 of 2 AAA-

2. Plant McGuire Nuclear Station Unit I Name 12700 Ha#ers Ferry Road. Huntersville. NC 28078 :2088039-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 ;XT/ A Address Expiration Date:

4. Identification of System SV - Main Steam Vent to Atmosphere

5. (a) Applicable Construction Code ASMEII 19 Edition, Summeran Witer Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 12999and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Com pnents Corrected, ASME Code Name of Manufacture National Other year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)

MCA-SV-6 .Duke Energy .3614 NN/A NA N/A Removed No IMCA-SV-6 Duke Energy 138046 .N/A N/A N/A Installed No S-'" " -*, .f-.-- - -. .- -.i -- .. . - -7

. .. . + +

7. Description of Work Relaced Comn-onntPAnZurteance Additional Description Replaced snubber on hange 1MCA-SV-6

8. Tests Conducted: Hydrostatic r- Pneumatic r Nominal Operation Pressure r Exempt ff Other r Pressure! ' PSI Test Temp. OF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XM

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A'----

Flow Diagram No(s).: MCFD-1593-S- .00 ......

Support/Restraint Sketch/Drawing No(s) .: lMCA-SV-6 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SVA-001 Applicable Manufacture's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp AN/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist '~~~-- Date March 31 ,26 13 Owner or Owner's Designee, Title i I I (( MA CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina ................ and employed y Hartford Steam Boiler Inspection & Insurance Company of I Connecticut

"-l L*-L'to'-

have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither e Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspect /

IF Swan .* Commissions NB 1473-NC1524, N-I Kr Inspector'&Signature -. National Board, State, ProvftM and Endo'snits '

ýDate Date (I ~L/- 204.~

20-ý3

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner Duke Enemy Carolinas. LLC Date 4/5/2013 526 South Church Street. Charlotte. NQC. 28201 Sheet 2 ILof AddressShe

2. Plant McGuireNuclar Station Unit I Name 12700 Ha2ers Ferry Road. Huntersville. NC 28078 2088932-01 Address Work Ordr # (or Repair/Replacement Organiz"tion P.O. No, Job No., etc.)

3. Work Performed by Duke Energy Carolinag LE Q Name Type Code Symbol Stamp: iN/A 526 South Church Street Charlotte. NC 28201-1006 Authorization No.: FN/A .

_ ... i1/aA Address Expiration Date: 1 . .

4. Identification of System !NV - Chemical and Volume Control

5. (a) Applicable Construction Code ASm 1gr Edition, mI and Winter Ad a, .-.. CodeCa (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Con onents Corrected, ASME Code Name of Manuacru National Other Year Removed, or Stamped Component .. of ManuN.rer aName Board No. Identification Built Inmtalled (Yes or No)

I1MCA-NV-215 , uk Energy T~2O77 tNA N/ j4A Removed No 1MCA-NV-215

!Duke Energy ,.

N_____ _____j38845 .. .*.

. . Aj Installed No

.,~~~~~~~~... . . J~.. l ... . . ..... ... ..

. . . . . . , . . ... . . . .. ...... . ..... ..... . . .. . ..... .. . . . . . . . . IL I..

7. Description of Work Repac Comxonent/PuVtAtenance Additional Description 'Replaced snubber on hanger IMCA-NV-215

8. Tests Conducted. Hydrostatic rj Pneumatic r Nominal Operation Pressure r- Exempt F! Other Cl Pressure IPSI Test Temp. ._F Description (Optional): ,-,, __

FORM NIS-2. OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME CodeSet0no XI

9. Remarks (Should 2 Component LineInclude Size: the Following Information, as Applicable):

............ Sheet of;.'2 Copoe n ize In. (nominal) System Class: AaMb1EnM _lss___"_....

Weld Isometric Drawing No(s).: f`N/A " .I Flow Diagram No(s).: _MCFD-_1554-02.00._..... __ _- .. ,, __ _ _ _

Support/Restraint Sketch/Drawing No(s).: IMCA-NV-215 : _ : ....:.... i Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: i . '

Applicable Manufacturr's Data Reports to be attached CERTIFICATE OF COMPLIANCE' I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A-7 Certificate of Authorization No. iN/A . Expiration Date N/A Signed ýFL Grass, Quality Assurance Technical Specialist , Date !April 5 ,201 Owner or Owner's Designem Title I I I""" : I" . . : " ". . ' " " " " " ' ' l" " "

CERTIFICATE OF INSERVICE sINSPECTION I, the undersgned, hol.dig a valid commission issued by the National Board of Boiler and Pressure Vessel Inspetors and the State or Province of North Carolina and employed by [Hartford Steam Boiler Inspection & Insurance Company Iof Connectic-ut have inspected the compoents described in this Owner's Report during the period t--* -o* - and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective.

measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measure s described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss ofany kind arising from or nncted with this inspection __

Il.. . .JFswan i,.Commissions -7 52.,-I-.

ýsignatm National Board, State, Province, and Endorsemetits

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner Duke Fi rov Carlintaq [LX Date 4/12/2013 526 South Church Street. (Charlotte. NC. 28201 Sheet Li of 2 AnOciSS

2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road. Huntersville. NC 28078 i2089158-01 Address Work Order # (or Repair/Replacement Organization P.O. No, Job No., etc.)

3. Work Performed by Duke EnergY Carolinas. LLC Name Type Code Symbol Stamp: IN/A Authorization No.: 'N/A 526 South Church Street. Charlotte, NC 28201-1006 . ... . .. N/IA Address Expiration Date: .

4. Identification of System NV - Chemical and Volume ...Control

5. (a) Applicable Construction Code ASME III 1927L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section Xl Code Case(s) N/A

6. Identification of Components

7. Description of Work RepIlaced Comnpnent/Part/Apountm ae Additional Description R ,placed snubber on hanger IMCR-NV-874

8. Tests Conducted: HydrostaticF Pneumatic F Nominal Operation Pressure F Exempt _ Other F Pressure PSI Test Temp. 0F Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).:

.MCFD-1554-Ol.O Support/Restraint Sketch/Drawing No(s).: lMCR-NV-874 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NV-20.

Applicable Manufcture's Data Reports to be atached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamtp N/A Certificate of Authorization No. 'N/A .Expiration DateIN/A Signed FL Grass, Quality Ass-urance Techniical Specialist Owner or Owner's Designee, Title

.4 ,r -Date April 12 ,20i 3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed Steam Boiler Inspection & Insurance Company . of Connecticut have inspected the components described in this Owner's Report during the period to4 ;, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, .expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. . .. . . ... ..

/ /J1 4 .. -

JF~wSwa C**

ommissions.NBI 1473-NC1524, N-I Inspector's Signature /National Board, State, Province, and Endorsements Dat . . .... 2o

FORM NIS-2 OWNER'S REPORT FOR REPAIBIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X3

1. Owner Duke Energy Carolinas. LLC Date 14/12/2013 526 South Church Street. Charlotte. NC. 28201 Sheet Address

2. Plant McGuire Nuclear Station Unit l Name 12700 Hatters Ferry Road. Huntersville. NC 28078 12089186-01 Address Work Order # (or Repair/Replacement Oranization P.O. No., Job No., etc.)

3. Work Performed by Dluk Fanprv Cjimlinsq TI Ir Name Type Code Symbol Stamp:..N/A Authorization No.: IN/A 526 South Church Street. Charl otte. NC 2 2 1I06_ .. .. N.N"l/A*.".. -

Address Expiration Date: .

4. Identification of System 'ND -Residual Heat Removal

5. (a) Applicable Construction Code ASME-II 19d2L Edition, ISuimernd Winte Addenda, IN/A*7+ Code Case.

(b) Applicable Edition of Section XI used for Repair/Replacepnent Activity 1998 Edition with the 1999 and 2000 Addenda _....

(c) Applicable Section Xi Code Case(s) N/A fi Trdentification of Corn nnenti . . .

Corrected,.

Removed, or ASME Code stamped Name of Manfctur National other Year Component Name of MasufactweSerial No. Board No. Identification Built Installed (Yes or No)

'1ND56 Dresser " .... D52155 119 'N/A 75 1Co ,ected Yes

.. ... . .. . .. . ... - -J ..

7. Description of Work RlcdCmoet~d~preac Additional Description Rp ace isc a-nd -th-e-b-oltiqg-m-at-erial in valve IND56

8. Tests, Conducted: Hydrostatic [7 Pneumatic [' Nominal Operation Pressure E3 Exempt [] Other [7 Pressure ZLjPSI Test Temp. !IOF Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required bythe Provisions of the ASME CodeSectionmX

9. Remarks (Should Include the Following Information, as Applicable): Sheet o Component Line Size:-i.i 1/5 . in. (nominal) System Class: ASM IJA_

Weld Isometric Drawing No(s).: ,MCFI- 1ND13 Flow Diagram No(s).: IMCFD-1561:01.00 . "

Support/Restraint Sketch/Drawing No(s).: ýN/A i Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: 1 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the.ASME Code, Section MI.

Type Code Symbol Stamp N/A -

Certificate of Authorization No. 1N/A Expiration Date.".',

Signed ýFl Girass. QuaLity Assurance Technical Specialist IDate F~pril 121,03 Owner or Owner's Designee, Title

........ .2 . . ... 0..2. L.. .

CERTIFICATE OF INSERVICE INSPECTION:

1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure VesselIp rs and the State or Province of SNorth Carolinaanemlydb North.C.oli.a !dan employed by I °Haord Steam Boiler Inspection& fIsu .. ce Company ofo Connecticut i have inspected the components described in this Owner's Report during the period ii - - .. to ilii* - Z .L, and state that to the best of my knowledge and belief;:the er has performed examinatios and taken coetrive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied,. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the ector nor his employer shall be liable:in any manner for any personal injury or property damage or a loss of any kind arising from aconnected with this inspection.

DSate .Commis.ons.N.11473,NC1524 A N-1.

Ins~ecto's ignaureNational Board, State, Province, and Endorsmentets Date~ 20L3-k

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energv Carolinas LI Date 4/14/2013 526 South Church Street. (Charlotte. NC, 28201 2 Sheet I. of i AdAA-.

2. Plant McGuire Nuclear Station unit I .... -. .

Name 12700 Haaers Ferry Road. Huntersvilie, NC 28078 :2089513-01 Address Work Order # (or Repair/Replacement Orgaization P.O. No.. Job No., etc.)

3. Work Performed by Duke Enemy Carolinas. LLC Name Type Code Symbol Stamp: IF Name Authorization No.: -N/A 526 South Church StreeL Charlotte. NC 28201-1006 Address Expiration.Date: N/A

4. Identification of System NI - Safety Injection

5. (a) Applicable Construction Code ASME I. i192L Edition, iSummer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Cornp nents ______

Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer

.... ~~~~~~~~~~~~~~~~~~~~~~~~ Serial

.. No...., .. ......Board No. Identification ]18:

Built orce Installed e No)

(Yes or NI System :Duke Energy N/A 42 N/A 19 Corrected.Yes 1NIN 60 BW / IP 97EP0310 N/A N/A - 1999 Intalled: Yes.

INI160 (*) iWalworth iA0156 N/A V File# 37- - -1974 Corrected Yes

7. Description of Work Ad, :1New Comnonent/Pant/Annurteance/Weld Additional Description Removed internals from original valve (* INI160 to be renamed as 1N1887):and.installed a new valve 1N1160 per EC 10415 1,T PSI TestTemp. !OF:-

8. Tests Conducted: Hydrostatic Pneumatic F Nominal Operation Pressure FF Exempt F Other.- Pressure PSI 'Ts.e j.-.

Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

9. Remarks (Should Include the Following Information, as Applicable): Sheet.... of.2...

Component Line Size: 2 & 6 in. (nominal) System Class: ASME ClassI Weld Isometric Drawing No(s).: MCFI- IN135 Flow Diagram No(s).: M4CFD-i562-03.00. . . . . . . . .. . . . .

Support/Restraint Sketch/Drawing No(s).: N/A .

-77.

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC 110415 Applicable Manufacturwe's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Sig~ ed urnceTelmialS L Gas , Q aliy ciais ........................ * * ?. .................. ................... ...... D te. --......

l -- -,20 Signed FL Grass, Quality Assurance Technical Specialist Date *p*1- 14 ,2043 Owner or Owner's Designee, Tide CERTIFICATE OF INSERVICE MSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inpectors and the State or Province of North Carolina ... and employed by iHartford Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period

. -.. : " . "' ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASMIE Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Aport. Furthermore, neither the Inspec nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fromnr ected with this inspe 2 z"- .

F Swan , ' Commissions -NB 473-NC524, N-I

..- /' inspector's signature .National Board, State, Province, and Endorsemtents

)

I

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinas. LILC Date 4/12/2013 526 South Church Street. Charlotte. NC. 28201 Sheet .1 of 2 Address

2. Plant McGuire Nuclear SStation Unit 1 Name 12700 Hagers Ferry Road. Huntersville, NC 28078 2089589-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke EnerU Carolinas, LLC Type Code Symbol Stamp.: N/A Name Authorization No.: N/A . .... ...

526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: 'N/A

4. Identification of System SV - Main Steam Vent to Atmosphere

5. (a) Applicable Construction Code ASME III 191L Edition, Summer and Winter Addenda, :NIA;. Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A

6. Identification of Con nents Nameof "Corrcteo ASMECode Component Manufacturer National Other Year Remove or Stamped Board No. Identification Built Installed (Yes or No)

Name of Manufacturer Serial No.

IMCA-SV-I Duke Energy 5340 N/A N/A N/A RemovedNO 1MCA-SV-1 Duke Energy .37642 N/A N/A N/A Installed No

7. Description of Work Repilaced Component/Part/Avnurtenance Additional Description A(eplaced snubber and it's bolting material on hanger iMCA-SV-i

8. Tests Conducted: Hydrostatic " Pneumatic r Nominal Operation Pressure r Exempt r- Other r Pressure i PSI Test Temp-.. 0 Description (Optional):

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 2 i

9. Remarks (Should Include the Following Information, as Applicable): Sheet' : of Component Line Size: 16 in. (nominal) System Class: ASME Class 2._ ' "

Weld Isometric Drawing No(s).: MCFI-1SV3& ISM15 Flow Diagram No(s).: .MCFD-1593-0l.03 . .

Support/Restiaint Sketch/Drawing No(s).: ,MCA-SV-Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-.SV-A .. ..

Applicable ManufCturr's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp -N/A Certificate of Authorization No. 'N/A Expiration Date IN/A .

Signed FL Grass, Quality Assurance Technical Specialist . . . Date 1Ap-ý-- ,20.3 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressu Vessel Inspectors and the State or Province of Northand employed by Hartford Steam Boiler Inspection & Insurance Company of

.Connecticut

, have inspected the components described in this Owner's Report during the period

..L -IL i _3ro .i- 1-2-"i !,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XM.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning. the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector n his employer shall be liable in any manner for any personal injury or property damage or a loss ofany kind arising from or c, ected with this inspection.

SSwanstommissions n1 a1473-NC1524, N-I Inspcto's SgnaureNational Board, State, Province and Endorsements Date Date.....

W I 20-a

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner Duke Energy Carolinas, LILDate I . .4/7 .....

526 South Church Street. (Charlotte. NC. 28201 Sheet ,I of. .

Address

2. Plant McGuire Nuclear rStation Unit I Name 12700 Hagers Ferry Road. Huntersville, NC 28078 .2091040-01 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)

3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: N/A

4. Identification of System CA - Auxiliary Feedwater

5. (a) Applicable Construction Code ASME [II 19-L Edition, ,Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda.

(c) Applicable Section XI Code Case(s) N/A

6. Identification of Components

7. Description of Work Renlaced Comnonent/Part/ARpurtenance Additional Description Replaced snubber on hanger IMCR-CA-443

8. Tests Conducted: Hydrostatic - Pneumatic F Nominal Operation Pressure F Exempt F Other r.. Pressure PSI Test Temp. "...°Fý-

Desrinio Mnrinall

FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 2

9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of Component Line Size: 6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: 'N/A.

Flow Diagram No(s).: MCFD-1592-01-00 Support/Restraint Sketch/Drawing No(s).: IMCR-CA-443 . . . . . ". . .

Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-CAO-00 -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date 'N/A Signed FL Grass, Quality Assurance Technical Specialist . Date April17 ,2073 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of iNorthfCarolina

... and employed by :Ha'fbi Steam Boiler Inspection & Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period.

4.*- 1/ - 1--/3 to ./-z 3---L, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective .

measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his mployer makes any warranty, expressed or implied, concerning the examinations. and corrective measures described in this Owner's Report. Furthermore, neither the In Vctor nor his employer shall be liable in any manner for any personal injury or property damage or a.loss of any kind arising from r connected with this inspection.

J. Swan- .Commissions NBI1473-NC 1524, N-i1

/Inspector's Signature National Board, State, Province, and Endorsements ateT'-%z~ ~" .L...~

6.0 Pressure Testinq Third Period- Third 10-Year Interval There was (1) pressure test zone pending for the Third Period / Third Interval that was not included in the previous Outage Summary Report (1EOC21). Table 6-1 shows the completion status for that zone. There was no through-wall leakage observed during the pressure test for zone 1NV-045L-B. All Section Xl pressure test requirements have been met for the Third Period of the Third 10-Year Interval for McGuire Unit 1.

Table 6-1 Class 2 Third Period/ Third Interval Completion Listing VT-2 Zone Completion Examination Code Cases Number Boundary Dwg Status Date Used INV-045L-B MC-ISIL4-1554-03.00 Complete 03/30/2012 None First Period - Fourth Interval There is I Class 1 (Examination Category B-P) pressure test zone that requires pressure testing each refueling outage. Table 6-2 shows a completion status of the Class 1 (Examination Category B-P) pressure test zone conducted during refueling cycle 1EOC 22.

Table 6-2 Class 1 PressureTest Completion Listing IEOC 22 1EOC 22 VT-2 Code Zone Completion Examination Case(s)

Number Boundary Dwg(s) Status Date Used 1NC-070L-A MC-ISIL4-1553-01.00 Complete 04/20/2013 N-566-2 MC-ISIL4-1553-02.00 MC-ISIL4-1553-02.01 MC-ISIL4-1554-01.00 MC-ISIL4-1554-01.01 MC-ISIL4-1554-01.02 MC-ISIL4-1561-01.00 MC-ISIL4-1562-01.00 MC-ISIL4-1562-02.00 MC-ISIL4-1562-02.01 MC-ISIL4-1562-03.00 MC-ISIL4-1562-03.01 Outage I/EOC 22 Refueling Outage Report Page 1 of 5 McGuire Unit 1 Revision 0 Section 6 - Fourth Ten-Year Interval July 10, 2013

There are 42 Class 2 (Examination Category C-H) pressure test zones that require pressure testing once each Inspection Period. Table 6-3 shows a completion status of the 42 Class 2 (Examination Category C-H) pressure tests zones that require pressure testing for the First Period of the Fourth Ten-Year Interval. The First Period began on 12/01/2011 and will extend to 11/30/2014.

T~hhI 91 Mance 9 - let Pjrin CnmnkjtI n I icfinnl VT-2 Code Zone Completion Examination Cases Number Boundary Dwg Status Date Used 1 1BB-096L-B MC-ISIL4-1580-01.00 Incomplete NA None 2 1BB-098L-B MC-ISIL4-1572-03.00 Incomplete NA None MC-ISIL4-1580-01.00 MC-ISIL4-1584-01.00 3 ICA-006L-B MC-ISIL4-1592-01.00 Incomplete NA None 4 ICA-032L-B MC-ISIL4-1584-01.00 Incomplete NA None MC-ISIL4-1591-01.01 MC-ISIL4-1592-01.00 MC-ISIL4-1617-01.00 5 1FW-001L-B MC-ISIL4-1571-01.00 Incomplete NA None 6 1FFW-027L-B MC-ISIL4-1554-03.00 Incomplete NA None MC-ISIL4-1554-03.01 MC-ISIL4-1561-01.00 MC-ISIL4-1562-03.00 MC-ISIL4-1563-01.00 MC-ISIL4-1571-01.00 7 1GN001L-B MC-ISIL4-1602-01.02 Incomplete NA None 8 1KC-001 L-B MC-ISIL4-1573-03.01 Incomplete NA None 9 1NC-001 L-B MC-ISIL4-1553-02.01 Incomplete NA None MC-ISIL4-1554-03.01 MC-ISIL4-1561-01.00 MC-ISIL4-1562-03.00 MC-ISIL4-1562-03.01 MC-ISIL4-1563-01.00 10 1NC-002L-B MC-ISIL4-1553-02.01 Incomplete NA None Outage 1I/EOC 22 Refueling Outage Report Page 2 of 5 McGuire Unit 1 Revision 0 Section 6 - Fourth Ten-Year Interval July 10, 2013

Tnhleda AA/ rince 9..- 1 a# rnridd f'e^% Ids##~ "I §a#finfw VT-2 Code Zone Completion Examination Cases Number Boundary Dwg Status Date Used 11 1NC-003L-B MC-ISIL4-1553-01.00 Incomplete NA None 12 1ND-019L-B MC-ISIL4-1554-01.02 Incomplete NA None MC-ISIL4-1561-01.00 MC-ISIL4-1562-03.00 MC-ISIL4-1562-03.01 MC-ISIL4-1563-01.00 MC-ISIL4-1571-01.00 MC-ISIL4-1572-01.00 13 IND-050L-B MC-ISIL4-1561-01.00 Complete 04/01/2013 None MC-ISIL4-1562-03.01 MC-ISIL4-1563-01.00 14 1NI-021L-B MC-ISIL4-1562-02.00 Complete 04/19/2013 None MC-ISIL4-1562-02.01 MC-ISIL4-1572-01.01 15 1NI-022L-B MC-ISIL4-1562-03.00 Incomplete NA None MC-ISIL4-1562-03.01 16 1NI-039L-B MC-ISIL4-1562-03.01 Incomplete NA None 17 1NI-053L-B MC-ISIL4-1562-03.00 Incomplete NA None 18 INI-060L-B MC-ISIL4-1562-02.01 Incomplete NA None MC-ISIL4-1562-03.00 MC-ISIL4-1562-01.00 Complete 03/23/2013 None 19 1NI-071 L-B 20 1NI-074L-B MC-ISIL4-1562-03.00 Incomplete NA None 21 1NI-044L-B MC-ISIL4-1553-02.00 Incomplete NA None 21 MC-ISIL4-1572-01.00 1NM-045L-B MC-ISIL4-1553-01.00 Incomplete NA None 22 MC-ISIL4-1572-01.00 23 1NM-046L-B MC-ISIL4-1572-01.01 Incomplete NA None 24 1NS-023L-B MC-ISIL4-1563-01.00 Incomplete NA None 25 1NS-024L-B MC-ISIL4-1563-01.00 Incomplete NA None Outage I/EOC 22 Refueling Outage Report Page 3 of 5 McGuire Unit 1 Revision 0 Section 6 - Fourth Ten-Year Interval July 10, 2013

Table 6-3 Class 2- 1st PeriodCompletion Listing VT-2 Code Zone Completion Examination Cases Number Boundary Dwg Status Date Used 26 1NV-001L-B MC-ISIL4-1554-01.00 Incomplete NA None MC-ISIL4-1554-01.01 MC-ISIL4-1554-01.02 MC-ISIL4-1554-02.01 1NV-002L-B MC-ISIL4-1554-01.02 Incomplete NA None 27 MC-ISIL4-1554-02.00 MC-ISIL4-1554-02.01 MC-ISIL4-1554-03.00 MC-ISIL4-1554-03.01 MC-ISIL4-1554-04.00 MC-ISIL4-1555-02.00 MC-ISIL4-1567-01.00 MC-ISIL4-1567-02.01 MC-ISIL4-1572-02.00 1NV-003L-B MC-ISIL4-1554-02.00 Incomplete NA None 28 MC-ISIL4-1554-02.01 MC-ISIL4-1556-01.01 29 1NV-016L-B MC-ISIL4-1554-01.00 Incomplete NA None MC-ISIL4-1554-01.01 MC-ISIL4-1554-01.02 MC-ISIL4-1554-02.00 MC-ISIL4-1554-02.01 MC-ISIL4-1554-03.00 MC-ISIL4-1554-03.01 MC-ISIL4-1554-05.00 MC-ISIL4-1561-01.00 MC-ISIL4-1562-01.00 MC-ISIL4-1562-03.00 30 1NV-01 7L-B MC-ISIL4-1554-01.00 Incomplete NA None MC-ISIL4-1554-01.01 MC-ISIL4-1554-01.02 MC-ISIL4-1554-01.03 31 1NV-018L-B MC-ISIL4-1554-01.02 Incomplete NA None 32 1NV-020L-B MC-ISIL4-1554-01.02 Incomplete NA None Outage I/EOC 22 Refueling Outage Report Page 4 of 5 McGuire Unit 1 Revision 0 Section 6 - Fourth Ten-Year Interval July 10, 2013

Table 6-3 Class 2- 1st PeriodCompletionsting VT-2 Code Zone Completion Examination Cases Number Boundary Dwg Status Date Used 33 1NV-045L-B MC-ISIL4-1554-03.00 Incomplete NA None 34 1NV-051L-B MC-ISIL4-1554-03.01 Incomplete NA None 35 1RN-003L-B MC-ISIL4-1574-04.00 Incomplete NA None 36 1RN-004L-B MC-ISIL4-1574-04.00 Incomplete NA None 37 1RV-002L-B MC-ISIL4-1604-03.00 Incomplete NA None 38 1SA-035L-B MC-ISIL4-1593-01.02 Incomplete NA None 39 1SM-006L-B MC-ISIL4-1572-03.00 Incomplete NA None MC-ISIL4-1584-01.00 MC-ISIL4-1591-01.01 MC-ISIL4-1593-01.00 MC-ISIL4-1593-01.03 40 1SM-036L-B MC-ISIL4-1593-01.00 Incomplete NA None MC-ISIL4-1593-01.02 MC-ISIL4-1593-01.03 41 1SM-037L-B MC-ISIL4-1593-01.00 Incomplete NA None MC-ISIL4-1593-01.03 1VI-001L-B MC-ISIL4-1602-01.02 Incomplete NA None 42 MC-ISIL4-1605-01.13 Outage 1IEOC 22 Refueling Outage Report Page 5 of 5 McGuire Unit 1 Revision 0 Section 6 - Fourth Ten-Year Interval July 10, 2013

ML13212A067

Text

SUBJECT:

Navigation menu

Search