ML12025A139: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 3: | Line 3: | ||
| issue date = 01/12/2012 | | issue date = 01/12/2012 | ||
| title = Inservice Inspection Report End of Cycle 21 Refueling Outage | | title = Inservice Inspection Report End of Cycle 21 Refueling Outage | ||
| author name = Repko R | | author name = Repko R | ||
| author affiliation = Duke Energy Carolinas, LLC | | author affiliation = Duke Energy Carolinas, LLC | ||
| addressee name = | | addressee name = | ||
Revision as of 04:13, 29 June 2019
| ML12025A139 | |
| Person / Time | |
|---|---|
| Site: | McGuire  |
| Issue date: | 01/12/2012 |
| From: | Repko R Duke Energy Carolinas |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| Download: ML12025A139 (400) | |
Text
{{#Wiki_filter:REGIS T. REPKO Vice President WEnergy McGuire Nuclear Station Duke Energy MGO VP / 12700 Hagers Ferry Rd.Huntersville, NC 28078 980-875-4111 980-875-4809 fax regis. repko@duke-energy. com January 12, 2012 U.S. Nuclear Regulatory Commission Document Control Desk Washington, D.C. 20555
Subject:
Duke Energy Carolinas, LLC (Duke)McGuire Nuclear Station, Unit 1 Docket Number 50-369 Inservice Inspection Report End of Cycle 21 Refueling Outage In accordance with ASME Section XI, attached is the In-service Inspection Report for the end of cycle 21 (EOC-21) refueling outage for McGuire Nuclear Station, Unit 1. This was the final outage of the Third Inspection Period for the Third Ten-Year Interval.Section 4.4 of the report lists the limited examination item numbers.Questions regarding this submittal should be directed to Kay L. Crane at (980) 875-4306.Regis T. Repko Attachment www. duke-energy. corn U. S. Nuclear Regulatory Commission January 12, 2012 Page 2 xc (with attachment): V. M. McCree Administrator, Region II U.S. Nuclear Regulatory Commission Marquis One Tower 245 Peachtree Center, Ave., NE Suite 1200 Atlanta, GA 30303-1257 John Zeiler Senior Resident Inspector U.S. Nuclear Regulatory Commission McGuire Nuclear Station J.H. Thompson. (addressee only)NRC Project Manager U.S. Nuclear Regulatory Commission 11555 Rockville Pike Mail Stop 0-8 G9A Rockville MD 20852-2738 U. S. Nuclear Regulatory Commission January 12, 2012 Page 3 bxc (w/out attachments): J.M. Boughman R. Branch MCfo1fori K.L. Crane IM&01oi C,.M.A. Pyne t5CO5z j3 G.J. Underwood bxc (with attachments): McGuire Document Control File McGuire RGC File ELL-ECO50 Attachment 1 OWNER'S REPORT FOR INSERVICE INSPECTIONS MCGUIRE UNIT 1 2011 REFUELING OUTAGE EOC 21 (OUTAGE 7)Location: McGuire Nuclear Station 12700 Hagers Ferry Road Huntersville, North Carolina 28078-9340 NRC Docket No. 50-369 National Board No. 44 Commercial Service Date: December 1, 1981 Document Completion Date: I- L Il.Owner: Duke Energy Carolinas 526 South Church St.Charlotte, N. C. 28201-1006 Revision 0 Prepared By: A t /Reviewed By: Approved By: Date / Z-,.-Date /"_Z -d_-Date / 2 -/ -?- FORM NIS-1 OWNER'S DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules 1. Owner: Duke Enerqy Carolinas, 526 S. Church St.. Charlotte, NC 28201-1006 (Name and Address of Owner)2. Plant: McGuire Nuclear Station, 12700 Haqers Ferry Road Huntersville, N.C. 28078-9340 (Name and Address of Plant)3. Plant Unit: 1 4. Owner Certificate of Authorization (if required) N/A 5. Commercial Service Date: December 1, 1981 6. National Board Number for Unit 44 7. Components Inspected: Component or Appu rtenance ManUfacturer or Manufacturer or Installer Installer Serial N o.State or Province No.National Board No.See Section 1.1 in the Attached Report Note: Supplemental sheets in the form of lists, sketches, or drawings may be used, provided (1) size is 8 1 2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.Total number of pages contained in this report 396 FORM NIS-1 (Back)8. Examination Dates April 19, 2010 to October 15, 2011 9. Inspection Period Identification:
- 10. Inspection Interval Identification:
- 11. Applicable Edition of Section XI 12. Date/Revision of Inspection Plan: Third Period Third Interval 1998 Addenda 2000 June 20, 2006 / Revision 2 13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Sections 2.0, 3.0, and 6.0 14. Abstract of Results of Examinations and Tests.See Section 4.0, and 6.0 15. Abstract of Corrective Measures.See Section 4.3 We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section Xl.Certificate of Authorization No. (if applicable)
N/A Date 20 /2-Signed Duke Energy Carolinas Owner Expiration Date N/A By (J CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Province of North Carolina employed by Hartford Steam Boiler of Connecticut (HSBCT) have inspected the components described in this Owners' Report during the period April 19, 2010 to October 15, 2011, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in the Owners' Report in accordance with the Inspection Plan and as required by the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, test, and corrective measures described in this Owners' Report.Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a 'o s of any kind arising from or connected with this inspection SCommissions N.C. 1524 1,N nspector s Si gt 6re National Board, State, Province, and Endorsements (Date L-10-- 2aO/P%HSBCT 200 Ashford Center North Suite 205 Atlanta, GA. 30338-4860 (800) 417-3721 www.hsbct.com DISTRIBUTION LIST 1. Duke Energy Carolinas Nuclear Technical Services Division Section XI Inspection Program Section 2. Inspection Services (ISI Coordinator)
- 3. NRC Document Control Desk 4. HSBCT (AIA)c/o ANII at McGuire 5. State of North Carolina Department of Labor c/o J. M. Givens, Jr.
TABLE OF CONTENTS Section Title Revision 1.0 General Information 0 2.0 Third Ten-Year Interval Inspection Status 0 3.0 Final Inservice Inspection Plan 0 4.0 Results of Inspections Performed 0 5.0 Owner's Report for Repair / Replacement Activities 0 6.0 Pressure Testing 0 7.0 Containment Inservice Inspection (IWE) 0 1.0 General Information This report describes the Inservice Inspection of Duke Energy Corporation's McGuire Nuclear Station Unit 1 during Outage 7 / EOC 21. This is the last outage of the Third Inspection Period of the Third Ten-Year Interval. ASME Section XI, 1998 Edition through the 2000 Addenda was the governing Code for selection and performance of the ISI examinations. Included in this report are: the inspection status for each examination category, the final inservice inspection plan, the inspection results for each item examined, and corrective action(s) taken when reportable conditions were found. In addition, there is an Owner's Report for the Repair / Replacement Section included for complete NIS-2 documentation of repairs and replacements. 1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.Reactor Vessel Combustion CE67102 NC-1 78379 20766 Engineering Pressurizer Westinghouse 1471 NC-178395 68-123 Steam Generator 1A BWI 7701-04 NC-302668 157 Steam Generator 1B BWI 7693-01 NC-302669 146 Steam Generator 1C BWI 7701-03 NC-302670 155 Steam Generator 1D BWI 7701-02 NC-302671 154 Centrifugal Pacific Pumps 1A-48582 N/A 19 Charging Pump 1 B-48583 22 Containment Spray Heat Delta Southern Co. 1A-35005-73-1 NC-147799 3394 Exchanger 1B-35005-73-2 NC-147796 3395 Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 1 Page 1 of 6 Revision 0 January 12, 2012 1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.Excess Letdown Heat Atlas Industrial 1809 NC-1 87817 1554 Exchanger Manufacturing Company Letdown Heat Exchanger Joseph Oat & Sons, Inc. 2049-2A NC-1 87881 552 Reciprocating Charging Union Pump Company N721031 B-603 N/A N/A Pump 1A 1-114E841G01 Reactor Coolant Pump Westinghouse 1 B 2-114E841G01 N/A N/A 1C 3-114E841G01 1D 4-114E841G01 Reciprocating Charging Metal Bellows Company 74730-002 N/A 002 Pump Accumulator Reciprocating Charging Richmond Engineering N2409-10 N/A 75219 Pump Suction Stabilizer Supply Co.Residual Heat Joseph Oat & Sons, Inc. 1A-2046-2A NC-234202 635 Removal Heat 1 B-2046-2A NC-234201 636 Exchanger Safety Injection Pump Pacific Pumps 1A-49355 N/A 80 1 B-49356 81 Regenerative Heat Joseph Oat & Sons, Inc. 2047-2A NC-1 87897 595 Exchanger 596 597 Seal Water Heat Atlas Industrial 1766 NC 169797 1548 Exchanger Manufacturing Company Seal Water AMF Cuno 1A-13 N/A 3822 Injection Filter 11B-14 3823 Main Steam Supply to Duke Power Co. SA N/A 4 Auxiliary Equipment System Containment Air Release Duke Power Co. VQ N/A 12 and Addition System Main Steam System Duke Power Co. SM N/A 17 Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 1 Page 2 of 6 Revision 0 January 12, 2012 1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.Main Steam Vent to Duke Power Co. SV N/A 18 Atmosphere System Reactor Coolant System Duke Power Co. NC N/A 28 Liquid Waste Recycle Duke Power Co. WL N/A 29 System Refueling Water System Duke Power Co. FW N/A 31 Auxiliary Feedwater Duke Power Co. CA N/A 32 System Residual Heat Removal Duke Power Co. ND N/A 35 System Nuclear Service Water Duke Power Co. RN N/A 36 System Chemical & Volume Duke Power Co. NV N/A 37 Control System Component Cooling Duke Power Co. KC N/A 38 System Main Feedwater System Duke Power Co. CF N/A 39 Containment Spray Duke Power Co. NS N/A 40 System Containment Ventilation Duke Power Co. RV N/A 41 Cooling Water System Safety Injection System Duke Power Co. NI N/A 42 Containment Purge Duke Power Co. VP N/A 6 Ventilation Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 1 Page 3 of 6 Revision 0 January 12, 2012 1.1 Identification Numbers Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province Board No. No.Safety Injection Delta Southern Co. 41617-72-1 NC-178396 3038 Accumulator Tank 1A Safety Injection Delta Southern Co. 41617-72-2 NC-178397 3039 Accumulator Tank 1 B Safety Injection Delta Southern Co. 41617-72-3 NC-178398 3040 Accumulator Tank 1 C Safety Injection Delta Southern Co. 41617-72-4 NC-178399 3041 Accumulator Tank 1 D Unit 1 Duke Power Co. N/A N/A 44 1.2 Reference Documents The following reference documents apply to the inservice inspections performed during this report period. A copy may be obtained by contacting the ISI Plan Manager at Duke's Corporate Office in Charlotte, North Carolina: 1. Request for Relief (RFR) 01-004 (Class 1, 2 and 3 snubber examination under station technical specification)
- 2. RFR-01-GO-002 to use Code Case N-416-2 "Alternative Pressure Test Requirement for Welded Repairs, Fabrication Welds for Replacement Parts and Piping Subassemblies, or Installation of Replacement Items by Welding, Class 1, 2 and 3 Section XI, Division 1." 3. RFR 01-005 (Risk Informed Inservice Inspection Program Submittal)
- 4. RFR 01-008 (Risk Informed ISI Alternative to Use VT-2 Instead of Volumetric Examination of Socket Welds)5. RFR 10-MN-002 Relief requested and approved to extend S/G primary manway stud exams to the first outage in the fourth interval.
Summary Numbers Ml.B6.90.0001 through M1..B6.90.0008. Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 1 Page 4 of 6 Revision 0 January 12, 2012 Reference Documents continued 6. Code Case N-460 (Alternative Examination Coverage For Class 1 and Class 2 Welds, Section XI, Division 1.)7. Code Case N-665 (Alternative Requirements for Beam Angle Measurements Using Refracted Longitudinal Wave Search Units)8. Code Case N-685 (Lighting Requirements for Surface Examinations, Section Xl, Division 1.)9. Code Case N-695 (Qualification Requirements for Dissimilar Metal Piping Welds, Section XI, Division 1.) Items are identified by the use of UT Procedure PDI-UT-1 0 and listed in the Plan Report in Section 3.0 of this report as dissimilar metal welds.10. Code Case N-700 (Alternative Rules for Selection of Classes 1, 2 and 3 Vessel Welded Attachments for Examination Section Xl, Division 1)(Categories B-K, C-C and D-A)11. Code Case N-706 (Alternative Examination Requirements of Table IWB-2500-1 and Table IWC-2500-1 for PWR Stainless Steel Residual and Regenerative Heat Exchangers, Section XI, Division 1)12. Code Case N-722 (Additional Examinations for Pressure Retaining Welds in Class 1 Components Fabricated with Alloy 600/82/182 Materials, Section XI, Division 1, 10CFR Part 50, Federal Register, final rule was issued September 10, 2008 mandates the use of this code case.) (Effective date is October 10, 2008)13. Code Case N-729-1 (Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure Retaining Partial Penetration Welds Section ,Xl, Division 1. 10CFR Part 50, Federal Register, final rule was issued September 10, 2008 mandates the use of this code case.)14. PIP M-07-2243 This PIP documented Summary Number M1.B1.21.0001 weld 1 RPV6-446B as having less than 90% coverage and re scheduling weld for future examination.
- 15. PIP M-11-7710 This PIP documents dried boron on (3) M1.B15.90 welds 1 RPV3-44F-SE, 1 RPV3-445G-SE and 1 RPV3-445C-SE.
.16. PIP M-11-7358 This PIP documents non service induced defects discovered on Summary Numbers M1.R1.11.2123 and M1.R1.16.0047 weld 1RCHP-IN.Outage 7/EOC 21 Refueling Outage Report Page 5 of 6 McGuire Unit 1 Revision 0 Section 1 January 12, 2012 Reference Documents continued 17. PIP M-10-3538 This PIP was written to address stress corrosion cracking failure mechanism was not specified and only thermal fatigue mechanism was considered during RA exams.18. PIP M-11-9036 This PIP was written to address limited welds and writing the RFR for limitations found during EOC-21.19. PIP M-11-4662 This PIP will track alternative examination process identified in RR 10-MN-002 for S/G primary manway studs.20. PIP M-1 1-6962 This PIP addresses water and boric acid deposits near the Unit 1 fuel transfer tube area.21. PIP M-11-6842 This PIP addresses Unit 1 Ice Condenser temps being high, and placing ice bed at risk.22. PIP M-1 1-6980 This PIP addresses water build up on the inside of equipment hatch.Outage 7/EOC 21 Refueling Outage Report McGuire Unit I Section 1 Page 6 of 6 Revision 0 January 12, 2012 2.0 Third Ten-Year Interval Inspection Status The completion status of inspections required by the 1998 ASME Code Section XI through the 2000 Addenda is summarized in this section. The requirements are listed by the ASME Section Xl Examination Category as defined in Table IWB-2500-1 for Class 1 Inspections, Table IWC-2500-1 for Class 2 Inspections and IWF-2500-1 for Class 1, 2, and 3 Component Supports. Augmented, Elective, and Risk Informed inspections are also included.During the McGuire Third 10 Year Interval, piping welds will be examined under the Risk Informed Inservice Inspection Program developed in accordance with methodology contained in the Westinghouse Owner's Group (WOG) Topical Report, WCAP-14572, Revision 1-NP-A. Request for Relief 01-005 was submitted to the NRC seeking approval to incorporate the Risk Informed Program into the Third 10 Year Interval ISI Plan for McGuire Unit 1. The NRC approved use of this program per SER dated June 12, 2002. Previous code Examination Categories B-F, B-J, C-F-I, and C-F-2 will now be combined under the new Risk Informed Category R-A.Class I Inspections Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed B-A Pressure Retaining Welds 8 8 100% Yes in Reactor Vessel B-B Pressure Retaining Welds 5 5 100% No in Vessels Other than Reactor Vessel B-D Full Penetration Welded 24 24 100% Partial Nozzles in Vessels Inspection Program B B-F Pressure Retaining Reference Dissimilar Metal Welds in Risk Vessel Nozzles Informed Program R01. Items B-G-1 Pressure Retaining Bolting 243 *235 96.7% Yes Greater than 2" in Diameter* RR 10-MN-002 allows eight exams to be done in EOC-22.Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 2 Page 1 of 5 Revision 0 January 12, 2012 Class I Inspections Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed B-G-2 Pressure Retaining 21 21 100% No Bolting 2" and Less in Diameter B-J Pressure Retaining Welds Reference in Piping Risk Informed Program R01. Items B-K Welded Attachments for 6 6 100% No Piping, Pumps and Valves B-L-1 Pressure Retaining Welds N/A N/A N/A Yes in Pump Casings B-L-2 Pump Casings 1*0 0.00% Yes B-M-1 Pressure Retaining N/A N/A N/A Yes Welds in Valve Bodies B-M-2 Valve Body > 4 in. **5 5 100% Yes Nominal Pipe Size B-N-1 Interior of Reactor Vessel 3 3 100% No B-N-2 Integrally Welded Core Support Structures and 2 2 100% Yes Interior Attachments to Reactor Vessels B-N-3 Removable Core Support I 1 100% Yes Structures B-0 Pressure Retaining Welds 3 3 100% Yes in Control Rod Housings*No pump casings disassembled this interval.**There were seven total valve groups. Only valves in five groups were disassembled and required examination this interval.Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 2 Page 2 of 5 Revision 0 January 12, 2012 Class I Inspections Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed B-P All Pressure Retaining REFERENCE SECTION 6.0 OF THIS REPORT Components B-Q Steam Generator Tubing NA See General Requirements Section 3.1 F-A Class 1 Component 69 69 100% No F01.010 Supports 6 Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB 2500-1. These examination categories are exempt from percentage requirements per IWB-2412 (a), Inspection Program B.Class 2 Inspections Examination Description Inspections Inspections Percentage 6 Deferral Category Required Completed Completed Allowed C-A Pressure Retaining Welds 28 28 100% No in Pressure Vessels C-B Pressure Retaining Nozzle 9 9 100% No Welds in Vessels C-C Welded Attachments for 32 32 100% No Vessels, Piping, Pumps and Valves C-D Pressure Retaining Bolting N/A N/A N/A N/A Greater Than 2" in Diameter C-F-1 Pressure Retaining Welds Reference in Austenitic Stainless Risk Informed Steel or High Alloy Piping Program R01.Items C-F-2 Pressure Retaining Welds Reference in Carbon or Low Alloy Risk Informed Steel Piping Program R01.Items II C-G Pressure Retaining Welds 8 8 100% No in Pumps and Valves C-H All Pressure Retaining REFERENCE SECTION 6.0 OF THIS REPORT Components F-A Class 2 Component 235 235 100% No F01.020 Supports Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 2 Page 3 of 5 Revision 0 January 12, 2012 Additional Component Support Examinations Class 1, 2 & 3 Examination Description Inspections Inspections Percentage 6Deferral Category Required Completed Completed Allowed F-A Supports other than Piping 47 47 100% No F01.040 Supports Class 1, 2 & 3 1 1 1 F01.050 Component Supports, No Snubbers Class 1, 2 & 3 6 Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB-2500-1 and IWC-2500-1.
- Examinations to be performed per Request for Relief 01-004.Risk Informed Inservice Inspection Program Class 1 and 2 Examination Description Inspections Inspections Percentage 6Deferral Category Required Completed Completed Allowed Piping Examinations R-A Class 1 and 2 Section 169 169 *100% No* Risk Informed percentages will be addressed per PIP M-10-3538.
Augmented / Elective Inspections Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section XI Code; therefore, it is exempt from ANII review, verification, and/or record certification. Summary Description Percentage Complete Number 100% of Outage 7 / EOC-21 M1..B15.80 Bare Metal Visual Inspection by VT-2 of BMI Nozzles per CC Requirements Met N-722 100% of Outage 7 / EOC-21 Ml.B135.90 Bare Metal Visual Inspection by VT-2 of RV hot leg nozzles Requirements Met per CC N-722 100% of Outage 7 / EOC-21 M11.B135.95 Bare Metal Visual Inspection by VT-2 of RV cold leg nozzles Requirements Met per CC N-722 100% of Outage 7 / EOC-21 M1.B4.10 Bare Metal Visual Inspection by VT-2 of RPV Head per CC Requirements Met N-729-1 No examinations required for M1.G2.1 RPV Closure Head Studs and Nuts per Nuclear Guide 1.65 Outage 7 / EOC-21 100% of Outage 7 / EOC-21 M1.G3.1 Pipe Rupture Protection Requirements Met No examinations required for M1.G4.1 Reactor Vessel Head to Pipe Welds Outage 7 / EOC-21 Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 2 Page 4 of 5 Revision 0 January 12, 2012 No examinations required for M1.G5.1 Reactor Vessel Head Exams -VT-2 and UT Per NRC Order Outage 7 / EOC-21 EA-03-009 No examinations required for M1 .G5.2 Reactor Vessel Vent Line -UT per NRC Order EA-03-009, Outage 7 / EOC-21 PT per NRC Order EA-03-009, VT-2 every 4 refueling outages or 7years per NRC Order EA-03-009, and VT-2 every 3 refueling outages per MRP-1 39 No examinations required for M1 .G5.3 Bare Metal Inspections of the Reactor Vessel Primary Outage 7 / EOC-21 Nozzles per MRP-139 No examinations required for M1 .G6.1 Bare Metal Visual Inspection of the Pressurizer Welds per Outage 7 / EOC-21 MRP-139 M1 .G6.2 Bare Metal Visual Inspection of the Pressurizer Manway 100% of Outage 7 / EOC-21 Diaphram Seal Weld per NRC Bulletin 2004-0 1 Requirements Met Weld Overlay Section Xl Appendix Q Examination Description Inspections Inspections Percentage Deferral Category Required Completed Completed Allowed M1.Q1.1 Weld Overlay N/A N/A N/A No Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 2 Page 5 of 5 Revision 0 January 12, 2012 3.0 Final Inservice Inspection Plan The final Inservice Inspection Plan shown in this section lists all ASME Section Xl Class 1, Class 2, Class 3, Augmented, and Risk Informed examinations credited for this report period.Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 3 Page 1 of 1 Revision 0 January 12, 2012 DUKE ENERGY NUCLEAR TECHNICAL SERVICES ScheduleWorks Inservice Inspection Database Management System Plan Report McGuire 1, 3rd Interval, Outage 7 (EOC-21)This report includes all changes through addendum IMNS-087 Summary Num Category AUG M1.B15.80.0001 Component ID ISOIDWG Numbers Class / System 1-RPV-BMI-Nozzles Class 1 NC MP/0/A/7150/165 Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 NDE-69 VT-2 Inconel Transition Weld to Stainless Steel Tube Bare Metal Visual Inspection by VT-2 qualified inspector of the BMI Nozzles per the requirements of Code Case N-722 (Item B15.80). The bare metal visual inspection shall include an inspection of the bottom head and Alloy 600 transition weld between the Alloy 600 tube and the stainless steel tube. This exam added per QA 513-J ER-MNS-09-01. This exam should be scheduled every other outage begining EOC-20. Reference Footnote 4 of Code Case N-722 for type of examination. Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).These augmented examinations are being rescheduled per QA-513-J Form, Tracking Number ER-MNS-10-03, initiated by C.A.Cruz of the Materials and NDE Services Group. All bottom mounted instrument (BMI) nozzles and transition welds will be examined every refueling outage instead of every other outage outlined in ER-MNS-09-01. M1.B1 5.90.0001 1 RPV3-445E-SE Class 1 NC MCFD 1553-01.00 MCM 1201.01-0147 MCM 1201.01-0148 NDE-68 VT-2 SS-Inconel 2.312 / 29.000 RV Primary Outlet Nozzle Weld and Buttering (Hot Leg) Nozzle to SE Examination Schedule begining 1EOC20 every refueling outage. Reactor Vessel Hot Leg Nozzles. Bare Metal Visual Inspection by VT-2 qualified inspector of the reactor vessel hot leg nozzles per the requirements of Code Case N-722. Per the requirements of 10 CFR 50.55a(g)(6)(ii)(E), all licensees of PWR's shall augment their ISI program by implementing ASME Code Case N-722 subject to the conditions specified in paragraph (g)(6)(ii)(E) 2 through 4. VT-2 Examination as specified in footnote 4 of Code Case N-722. Acceptance criteria is "no evidence of borated water leakage" Reference ER Tracking Number ER MNS- 09-09 .Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 1 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched ThicklNPS Cal Blocks Componenet ID 2 Class I System Description Comments Category AUG M1.B15.90.0002 1RPV3-445F-SE Class 1 NC MCFD 1553-01.00 NDE-68 VT-2 SS-Inconel 2.312 / 29.000 MCM 1201.01-0147 MCM 1201.01-0148 RV Primary Outlet Nozzle Weld and Buttering (Hot Leg) Nozzle to SE Examination Schedule begining 1 EOC20 every refueling outage. Reactor Vessel Hot Leg Nozzles. Bare Metal Visual Inspection by VT-2 qualified inspector of the reactor vessel hot leg nozzles per the requirements of Code Case N-722. Per the requirements of 10 CFR 50.55a(g)(6)(ii)(E), all licensees of PWR's shall augment their ISI program by implementing ASME Code Case N-722 subject to the conditions specified in paragraph (g)(6)(ii)(E) 2 through 4. VT-2 Examination as specified in footnote 4 of Code Case N-722. Acceptance criteria is "no evidence of borated water leakage" Reference ER Tracking Number ER MNS- 09-09 .Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).Ml.B1 5.90.0003 1RPV3-445G-SE Class 1 NC MCFD 1553-01.00 NDE-68 VT-2 SS-Inconel 2.312 /29.000 MCM 1201.01-0147 MCM 1201.01-0148 RV Primary Outlet Nozzle Weld and Buttering (Hot Leg) Nozzle to SE Examination Schedule begining 1 EOC20 every refueling outage. Reactor Vessel Hot Leg Nozzles. Bare Metal Visual Inspection by VT-2 qualified inspector of the reactor vessel hot leg nozzles per the requirements of Code Case N-722. Per the requirements of 10 CFR 50.55a(g)(6)(ii)(E), all licensees of PWR's shall augment their ISI program by implementing ASME Code Case N-722 subject to the conditions specified in paragraph (g)(6)(ii)(E) 2 through 4. VT-2 Examination as specified in footnote 4 of Code Case N-722. Acceptance criteria is "no evidence of borated water leakage" Reference ER Tracking Number ER MNS- 09-09 .Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).M1.B15.90.0004 1RPV3-445H-SE Class 1 NC MCFD 1553-01.00 NDE-68 VT-2 SS-Inconel 2.312 / 29.000 MCM 1201.01-0147 MCM 1201.01-0148 RV Primary Outlet Nozzle Weld and Buttering (Hot Leg) Nozzle to SE Examination Schedule begining 1EOC20 every refueling outage. Reactor Vessel Hot Leg Nozzles. Bare Metal Visual Inspection by VT-2 qualified inspector of the reactor vessel hot leg nozzles per the requirements of Code Case N-722. Per the requirements of 10 CFR 50.55a(g)(6)(ii)(E), all licensees of PWR's shall augment their ISI program by implementing ASME Code Case N-722 subject to the conditions specified in paragraph (g)(6)(ii)(E) 2 through 4. VT-2 Examination as specified in footnote 4 of Code Case N-722. Acceptance criteria is "no evidence of borated water leakage" Reference ER Tracking Number ER MNS- 09-09. Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).Printed 01/12/12 GJU8302 v. 06/18/09.................. ...... ....SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 2 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category AUG M1.B15.95.0003 1RPV3-445C-SE Class 1 NC MCFD 1553-01.00 NDE-68 VT-2 SS-Inconel 2.281 127.500 MCM 1201.01-0147 MCM 1201.01-0148 RV Primary Inlet Nozzle Weld and Buttering (Cold Leg) Nozzle to SE Examination Schedule begining 1 EOC20. Reactor Vessel Cold Leg Nozzles to be inspected per the requirements of footnote 1 of 10 CFR 50.55a. These inspections shall begin in the interval in effect on January 1, 2009, and shall be prorated over the remaining periods and refueling outages in this interval. Bare Metal Visual Inspection by VT-2 qualified inspector of the reactor vessel cold leg nozzles per the requirements of Code Case N-722. Per the requirements of 10 CFR 50.55a(g)(6)(ii)(E), all licensees of PWR's shall augment their ISI program by implementing ASME Code Case N-722 subject to the conditions specified in paragraph (g)(6)(ii)(E) 2 through 4. VT-2 Examination as specified in footnote 4 of Code Case N-722. Acceptance criteria is"no evidence of borated water leakage" Reference ER Tracking Number ER MNS- 09-08, Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).M1..B15.95.0004 1RPV3-445D-SE Class 1 NC MCFD 1553-01.00 NDE-68 VT-2 SS-Inconet 2.281 /27.500 MCM 1201.01-0147 MCM 1201.01-0148 RV Primary Inlet Nozzle Weld and Buttering (Cold Leg) Nozzle to SE Examination Schedule begining 1 EOC20. Reactor Vessel Cold Leg Nozzles to be inspected per the requirements of footnote 1 of 10 CFR 50.55a, These inspections shall begin in the interval in effect on January 1, 2009, and shall be prorated over the remaining periods and refueling outages in this interval. Bare Metal Visual Inspection by VT-2 qualified inspector of the reactor vessel cold leg nozzles per the requirements of Code Case N-722. Per the requirements of 10 CFR 50.55a(g)(6)(ii)(E), all licensees of PWR's shall augment their ISI program by implementing ASME Code Case N-722 subject to the conditions specified in paragraph (g)(6)(ii)(E) 2 through 4. VT-2 Examination as specified in footnote 4 of Code Case N-722. Acceptance criteria is"no evidence of borated water leakage" Reference ER Tracking Number ER MNS- 09-08 .Any questions concerning this exam should be directed to the Materials and NDE Services Group (Chris Cruz or Jody Shuping).Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 3 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category AUG M1 .B4.10.0001 Component ID ISOIDWG Numbers Class I System 1RPV-Head Class 1 NC MCFD 1553-01.00 MCM 1201.01-0186 001 Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 NDE-70 VT-2 As specified in ASME Code Case N-729-1, a direct visual examination of the bare metal surface of the entire outer surface of the head, including essentially 100% of the intersection of each nozzle with the head (J-groove). For coverage requirements see Figure 1 of Code Case N-729-1. For additional information reference QA-513J (ER-MNS-09-03). Acceptance criteria specified in ASME Code Case N-729-1 subject to the conditions in 10CFR 50.55a (g)(6)(ii)(D)(2) through (6). Relevant conditions for the purpose of the VE shall include areas of corrosion, boric acid deposits, discoloration, and other evidence of nozzle leakage. If EDY<8 and no flaws unacceptable for continued service have been detected, the reexamination frequency may be extended to every third refueling outage or 5 calendar years, whichever is less, provided an IWA-2212 VT-2 visual examination of the head is performed under the insulation through multiple access points in outages that the VE is not completed. Last Bare Metal Visual occurred during 1EOC18, so next full bare metal visual will be due in 1EOC21, provided EDY remains less than 8 and IWA-2212 VT-2 visuals are performed in every outage these VE's are not. EDY Calculation will continue to be updated and if EDY greater than or equal to 8 these VE's will be required every refueling outage, with no flexibility. Schedule Flexibility: Time between inspections may be shortened, but not lengthened. For additional information, contact Rachel Doss in the Materials and NDE Services Section, Nuclear Technical Services Division. This inspection replaces Augmented examinations M1.G5.1.0001 and Ml .G5.2.0001 required by NRC Order EA-03-009. Once licensee implements this requirement the First Revised NRC Order EA-03-009 no longer applies and is deemed to be withdrawn. Ml.G3.1.0004 Circumferential 1NC1F-107 Class 1 NC MCFI-1NC-47 NDE-35 PT SS 1.000 1 10.000 G03.001.002, G03.001.002/ MC-ISIN3-1553-01.00 Elbow to Nozzle AUGMENTED EXAMINATION. REFERENCE DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). M1 .G3.1.0004 Circumferential 1NC1F-107 Class 1 NC MCFI-1NC-47 MC-ISIN3-1553-01.00 PDI-UT-2 UT SS 1.000 /10.000 PDI-UT-2-C PDI-UT-2A-M 50209 G03.001.002, G03.001.002/ Elbow to Nozzle AUGMENTED EXAMINATION. REFERENCE DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 4 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Category AUG Ml .G3.1.0005 Component ID ISOIDWG Numbers Class / System Procedure Insp Req Material Sched Thick/NPS Description Comments Cal Blocks Componenet ID 2 1 NC-72-1 Class 1 NC MCFI-1 NC-47 NDE-35 PT SS 1.000 / 10.000 G03.001.001, G03.001.001/ Circumferential MC-ISIN3-1553-01.00 Elbow To Pipe AUGMENTED EXAMINATION. REFERENCE DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). Ml.G3.1.0005 1 NC-72-1 Class 1 NC MCFI-1NC-47 MC-ISIN3-1553-01.00 PDI-UT-2 UT SS 1.000/ 10.000 PDI-UT-2-C PDI-UT-2A-M 50209 G03.001.001, G03.001.001/ Circumferential Elbow To Pipe AUGMENTED EXAMINATION. REFERENCE DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). MIl.G3.1 .0006 Circumferential INC-73-1 Class 1 NC MCFI-1NC-47 NDE-35 PT SS 1.000 / 10.000 G03.001.003, G03.001.003/ MC-ISIN3-1553-01.00 Elbow To Pipe AUGMENTED EXAMINATION. REFERENCE DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). M1 .G3.1.0006 1NC-73-1 Class 1 NC MCFI-1NC-47 MC-ISIN3-1553-01.00 PDI-UT-2 UT SS 1.000 1 10.000 PDI-UT-2-C PDI-UT-2A-M 50209 G03.001.003, G03.001.003/ Circumferential Elbow To Pipe AUGMENTED EXAMINATION. REFERENCE DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 5 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched ThicklNPS Cal Blocks Componenet ID 2 Class I System Description Comments Category AUG M1.G6.2.0001 1 PZR-MANWAY Class 1 NC MCM 1201.01-0170 001 NDE-68 VT-2 CS-Inconel 0.000 / 0.000 PZR Manway Insert (Gap Between Manway Cover and PZR) 1 PZR-W1 1 Pressurizer Manway Diaphram Seal Weld. Bare Metal Visual Exam by VT-2 qualified inspector. Examine the gap between the Pressurizer Manway Cover and Manway for evidence of diaphram plate seal weld leakage. (For responsible individual, contact J.M. Shuping, Alloy 600 Enginerring Nuclear Technical Services). Reference NRC Bulletin 2004-01. To be done every Outage (EOC-18 through EOC-31)Category B-A M1 1B1.21.0001 1RPV6-446B Class I NC MCM 1201.01-204 PDI-UT-12 UT CS 7.000 10.000 50376 B101.021.00' MCM 1201.01-225 50470 Circumferential MCM 1201.01-224 Head Ring to Head Cap CLOSURE HEAD RING PC. 446-03 TO CLOSURE HEAD CAP PC.446-04. Examined EOC-18, 70.8% coverage. Rescheduled to EOC-19 to get additional coverage. Reference PIP M-07-02243. Rescheduled to 1EOC-20 to allow time for UT Inspector qualification, also shroud will not be removed during EOC-19.Reference PIP M-07-02243 for additional information concerning percent of weld coverage for this weld. Per code deferral is allowed until the end of interval, if no additional coverage is obtained RFR must be filed.Per station request on 01/12/2010 weld rescheduled from Outage 6 (1EOC-20) to Outage 7 (1EOC-21), 1EOC-21 will have much of the insulation removed for MRP-139 exams. W/O 1857060 will remove insulation from closure head.Drawing MCM 1201.01-0224 shows Reactor Head Thickness as 7 inch minimum at weld.Category B-B M1. B2.12.0002 1 PZR-9 Class 1 NC MCM 1201.01-170 PDI-UT-6 UT CS 3.750 / N/A 50337 B02.012.00; Longitudinal MCM 1201.01-171 Head To Shell PRESSURIZER UPPER HEAD TO SHELL EXAMINED OUTAGE 3/EOC17 ADDITIONAL SAMPLE FOR ITEM NUMBER B02.011.001 REFERENCE PIP M-05-4894 Depending on personnel availability NDE-820, NDE-3611 and NDE-640 may be needed in lieu of PDI-UT-6.Drawing EDSK 379624B in Manual MCM 1201.01-0371 shows 2.500 minimum wall at the circumferential weld and 3.750 minimum wall for the shell which covers the lonqitudinal weld.Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 6 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category B-D M1 .13.100.0009 Dissimilar M1.83.100.0010 Component ID ISOIDWG Numbers Procedure Insp Req Material Sched Class I System Description Comments ThicklNPS Cal Blocks Componenet ID 2 1 RPV1-462A-IR Class 1 NC MCM 1201.0 MC-ISIN-155 MCM 1201.0 1CRPV1 -462N-IR Class 1 NC MCM 1201.0 1-0247 53-01.00 1-113 Risk Segment NC-08 0.625 / 6.250 NDE-71 VT-1 Inconel UHI Nozzle to Head UHI Auxiliary Head Nozzle located at 0 degrees on MCM 1201.01-0247( See Detail B). Examine inner radius as required per Figure IWB-2500-7(d). Reference PIP G-10-0134 CA# 9 and 17.Enhanced VT-1 Inspection is required in lieu of UT inspection. A Vendor that is qualified for remote automated Visual examinations (Enhanced VT-1) will have to be contracted to perform this inspection. 11-0247 Risk Segment NC-08.NDE-71 VT-1 Inconel 0.625 / 6.250 MC-ISIN-1553-01.00 Dissimilar MCM 1201.01-113 UHI Nozzle to Head UHI Auxiliary Head Nozzle located at 90 degrees on MCM 1201.01-0247( See Detail B). Examine inner radius as required per Figure IWB-2500-7(d). Reference PIP G-10-0134 CA# 9 and 17.Enhanced VT-1 Inspection is required in lieu of UT inspection. A Vendor that is qualified for remote automated Visual examinations (Enhanced VT-1) will have to be contracted to perform this inspection. M1.183.100.0011 Dissimilar 1RPV1-462C-IR Class 1 NC MCM 1201.01-0247 MC-ISIN-1553-01.00 MCM 1201.01-113 Risk Segment NC-08.NDE-71 VT-1 Inconel 0.625 / 6.250 UHI Nozzle to Head UHI Auxiliary Head Nozzle located at 180 degrees on MCM 1201.01-0247( See Detail B). Examine inner radius as required per Figure IWB-2500-7(d). Reference PIP G-10-0134 CA# 9 and 17.Enhanced VT-1 Inspection is required in lieu of UT inspection. A Vendor that is qualified for remote automated Visual examinations (Enhanced VT-I) will have to be contracted to perform this inspection. Printed 01/12/12 GJU8302 v. 06/18/09.. .... ....... -------- .............. SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 7 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category B-D MI.B3.100.0012 Dissimilar Component ID ISO/DWG Numbers Class I System Procedure Insp Req Material Sched ThickINPS Description Comments Cal Blocks Componenet ID 2 1RPV1-462D-IR Class 1 NC MCM 1201.01-0247 MC-ISIN-1553-01.00 MCM 1201.01-113 Risk Segment NC-08*NDE-71 VT-1 Inconel 0.625 / 6.250 UHI Nozzle to Head UHI Auxiliary Head Nozzle located at 270 degrees on MCM 1201.01-0247( See Detail B). Examine inner radius as required per Figure IWB-2500-7(d). Reference PIP G-10-0134 CA# 9 and 17.Enhanced VT-1 Inspection is required in lieu of UT inspection. A Vendor that is qualified for remote automated Visual examinations (Enhanced VT-1) will have to be contracted to perform this inspection. Category B-G-1 M1.B6.1 10.0001 1SGC-MW-X2-Y1 Class 1 NC MCM 1201.01-0747 MCM 1201.01-0684 NDE-62 VT-1 CS 0.000 1 2.500 B06.1 10.00!M1 .B6.110.0002 STEAM GENERATOR IC PRIMARY INLET MANWAY NUTS. 20 NUTS. X2-Y1 QUADRANT.1 SGC-MW-X2-Y2 Class 1 NC MCM 1201.01-0747 NDE-62 VT-1 CS 0.000 /2.500 MCM 1201.01-0684 B06.1 10.00 STEAM GENERATOR 1C PRIMARY OUTLET MANWAY NUTS. 20 NUTS. X2-Y2 QUADRANT.M1.B6.110.0007 1SGB-MW-X1-Y1 Class 1 NC MCM 1201.01-0747 NDE-62 VT-1 CS 0.000 / 2.500 B06.110.00: MCM 1201.01-0683 STEAM GENERATOR 1B PRIMARY INLET MANWAY NUTS. 20 NUTS. X1-Y1 QUADRANT.M1.B6.110.0008 1SGB-MW-Xl-Y2 Class 1 NC MCM 1201.01-0747 NDE-62 VT-1 CS 0.000 /2.500 B06.1 10.00'MCM 1201.01-0683 STEAM GENERATOR 16 PRIMARY OUTLET MANWAY NUTS. 20 NUTS. Xl-Y2 QUADRANT.Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 8 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category B-G-2 M1.B7.70.0011 1NI-175 Class 1 NI MC-ISIN3-1562-03.01 NDE-62 VT-1 SS 1.250 / N/A B07.070.0641 MCM-1205.36-00281001 GROUP 8.6" WESTINGHOUSE CHECKVALVE. INSPECT ONE OF THE FOLLOWING VALVES IN GROUP 8: 1NI-160, INI-175 and 1NI-176.Category B-K M1.B10.10.0002 1PZR-SKIRT Class 1 NC MCM 1201.01-170 NDE-25 MT CS 1.50010.000 B10.010.001, B10.010.0011 MCM 1201.01-0048 MCM 1201.01-140 Support Skirt To Head WELDED ATTACHMENT. PRESSURIZER SUPPORT SKIRT TO LOWER HEAD.Perform surface exam per Table IWB-2500-1 and Note 7 of Examination Category B-K. Reference PIP G-09-0921 CA#2.Implementation of Code Case N-700 requires this welded attachment to be examined. Reference PIP G-08-00499 ACA#2 and CA#5.Category C-A M1.C1.10.0001 1RHR-1A-3-4 Class 2 ND MCM 1201.06-22 VT-2 SS 0.750 /35.750 C01.010.05(Circumferential MC-ISIN3-1561-01.00 Nozzle belt To Flange RESIDUAL HEAT REMOVAL HEAT EXCHANGER IA.Residual Heat Removal Heat Exchanger 1A Nozzle Belt to Flange Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Residual Heat Removal Heat Exchanger 1A is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1561-01.00 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 9 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched ThickINPS Cal Blocks Componenet ID 2 Class I System Description Comments Category C-A M1.C1.10.0005 1RHR-11B-3-4 Class 2 ND MCM 1201.06-22 VT-2 SS 0.750135.750 C01.010 Circumferential Nozzle Belt To Flange Residual Heat Removal Heat Exchanger 1B Nozzle Belt to Flange Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Residual Heat Removal Heat Exchanger 1 B is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1561-01.00 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.M1.C1.20.0001 5141-3-HD1 Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 / 10.920 C01.020.07, Circumferential MC-ISIN3-1554-01.02 Nozzle belt To Head REGENERATIVE HEAT EXCHANGER. (Shell 3)Regenerative Heat Exchanger (Shell 3) Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 10 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG NIumbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category C-A M1.C1.20.0002 5141-3-HD2 Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 1 10.920 C01.020.07! Circumferential MC-ISIN3-1554-01.02 Shell To Head REGENERATIVE HEAT EXCHANGER. (Shell 3)Regenerative Heat Exchanger (Shell 3) Shell to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos.MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.M1.C1.20.0006 1 RHR-11B-2-3 Class 2 ND MCM 1201.06-22 VT-2 SS 0.750 / 35.750 C01.020 Circumferential Nozzle belt To Head Residual Heat Removal Heat Exchanger 1B Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Residual Heat Removal Heat Exchanger 1B is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1561-01.00 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 11 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category C-A M1.C1.20.0011 1RHR-1A-2-3 Class 2 ND MCM 1201.06-22 VT-2 SS 0.750/35.750 C01.020.03(Circumferential MC-ISIN3-1561-01.00 Nozzle belt To Head RESIDUAL HEAT REMOVAL HEAT EXCHANGER IA.Residual Heat Removal Heat Exchanger 1A Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Residual Heat Removal Heat Exchanger 1A is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1561-01.00 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.M1.C1.20.0012 5141-1-HD1 Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 110.920 C01.020.07(Circumferential MC-ISIN3-1554-01.02 Nozzle belt To Head REGENERATIVE HEAT EXCHANGER. (Shell 1)Regenerative Heat Exchanger (Shell 1) Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Printed 01/12/12 GJUB302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 12 of 50 This report includes all changes-through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Class I System Description Comments Thick/NPS Cal Blocks Componenet ID 2 Category C-A MlCl.20.0013 Circumferential 5141-1-HD2 Class 2 NV MCM 1201.06-0015 MC-ISIN3-1554-01.02 VT-2 SS 1.075 / 10.920 C01.020.07' Mi.C1.20.0014 Circumferential Shell To Head REGENERATIVE HEAT EXCHANGER. (Shell 1)Regenerative Heat Exchanger (Shell 1) Shell to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos.MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.5141-2-HD1 Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 / 10.920 C01.020.07; MC-ISIN3-1554-01.02 Nozzle belt To Head REGENERATIVE HEAT EXCHANGER. (Shell 2)Regenerative Heat Exchanger (Shell 2) Nozzle Belt to Head Weld. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Printed 01/12/12 GJU8302 v. 06/18/09 SDOA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 13 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Category C-A M1.C1.20.0015 Component ID ISOIDWG Numbers Class / System Procedure Insp Req Material Sched ThicklNPS Description Comments Cal Blocks Componenet ID 2 5141-2-HD2 Class 2 NV MCM 1201.06-0015 MC-ISIN3-1554-01.02 VT-2 SS 1.075 / 10.920 C01.020.07" Circumferential Shell To Head REGENERATIVE HEAT EXCHANGER. (Shell 2)Regenerative Heat Exchanger (Shell 2) Shell to Flange Weld. Code Case N-706 has been incorporated for use during the Third interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos.MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.M1 .C1.30.0006 Circumferential 5141-1-NB-TS Class 2 NV MCM 1201.06-0015 MC-ISIN3-1554-01,02 VT-2 SS 1.075 / 10.920 C01.030.02(Nozzle belt To Tubesheet REGENERATIVE HEAT EXCHANGER. (SHELL 1)Regenerative Heat Exchanger (Shell 1) Nozzle Belt to Tubesheet. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 14 of 50 Printed 01/12/12 GJU8302 v. 06/18/09 This report includes all changes through addendum 1IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 Class I System Description Comments Category C-A M1.C1.30.0007 5141-1-TS-SH Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 1 10.920 C01.030.02' Circumferential MC-ISIN3-1554-01.02 Tubesheet To Shell REGENERATIVE HEAT EXCHANGER. (SHELL 1)Regenerative Heat Exchanger (Shell 1) Tubesheet to Shell. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos.MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.M1.C1.30.0008 5141-2-NB-TS Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075/ 10.920 C01.030.02, Circumferential MC-ISIN3-1554-01.02 Nozzle belt To Tubesheet REGENERATIVE HEAT EXCHANGER. (SHELL 2)Regenerative Heat Exchanger (Shell 2) Nozzle Belt to Tubesheet. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Printed 01/12/12 GJU8302 v. 06/18/09 SDOA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 15 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Procedure Insp Req Material Sched ThicklNPS Cal Blocks Componenet ID 2 Class I System Description Comments Category C-A M1.C1.30.0009 5141-2-TS-SH Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 110.920 C01.030.02= Circumferential MC-ISIN3-1554-01.02 Tubesheet To Shell REGENERATIVE HEAT EXCHANGER. (SHELL 2)Regenerative Heat Exchanger (Shell 2) Tubesheet to Shell. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos.MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1 554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.M1.C1.30.0010 5141-3-NB-TS Class 2 NV MCM 1201.06-0015 VT-2 SS 1.075 /10.920 C01.030.02i Circumferential MC-ISIN3-1554-01.02 Nozzle belt To Tubesheet REGENERATIVE HEAT EXCHANGER. (SHELL 3)Regenerative Heat Exchanger (Shell 3) Nozzle Belt to Tubesheet. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos. MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.b Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 16 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category C-A Ml .Cl .30.0011 Circumferential Component ID ISO/DWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 5141-3-TS-SH Class 2 NV MCM 1201.06-0015 MC-ISIN3-1554-01.02 VT-2 SS 1.075 /10.920 C01.030.02t Tubesheet To Shell REGENERATIVE HEAT EXCHANGER. (SHELL 3)Regenerative Heat Exchanger (shell 3) Tubesheet to Shell. Code Case N-706 has been incorporated for use during the Third Interval which allow an alternative exam (VT-2) for this weld. The Regenerative Heat Exchanger is inside the Class 2 Pressure Test Boundary and will receive a VT-2 exam once each period. For additional information reference PIP G-08-480 and file Nos.MC-1212.04, MC-1223.04 and MC-1223.11 (Record Retention Code # 000252).If evidence of leakage is detected for this item during system leakage test, the NDE Plan Manager will be notified of leakage so evaluation can be performed. Use of this code case shall be discontinued for the heat exchanger and others of the same design or configuration if leakage has been detected.This exam will be performed under the Pressure Test Program, reference McGuire third Inspection Interval Inservice Inspection Plan. Reference drawing MC-ISL-1554-01.02 and Plan Addendum M1-PT-023. A VT-2 visual exam will be performed for this weld.Category C-B Ml .C2.21.0008 Circumferential 1SGD-W259 Class 2 SM MCM 1201.01-0782 NDE-25 MT CS 4.125 / 21.740 C02.021.002, C02.021.002/ MC-ISIN3-1591-01.01 MCM 1201.01-0684 Nozzle to Steam Drum STEAM GENERATOR 1D AUXILLARY FEEDWATER NOZZLE.Drawing MCM 1201.01-0735 shows diameter of nozzle as 21.740(+0.000 / -0.015) where it welds to steam drum, and the thickness listed is the thickness of the steam generator. Examiner may use either MT or PT for examination. Ml .C2.21.0008 Circumferential 1SGD-W259 Class 2 SM MCM 1201.01-0782 MC-ISIN3-1591-01 .01 MCM 1201.01-0684 NDE-820 UT CS 4.125 /21.740 5139385 C02.021, 002, C02.021 .0021 Nozzle to Steam Drum STEAM GENERATOR 1D AUXILLARY FEEDWATER NOZZLE.Drawing MCM 1201.01-0735 shows diameter of nozzle as 21.740(+0.000 / -0.015) where it welds to steam drum, and the thickness listed is the thickness of the steam generator. Examiner may use either MT or PT for examination. Printed 01/12/12 GJU8302 v.06/18/09-S D-QACat"C McGuire 1 1/12/2012 6:31:02 AM Page 17 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category C-B M1.C2.21.0008 Circumferential Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 1SGD-W259 Class 2 SM MCM 1201.01-0782 NDE-640 UT CS 4.125 /21.740 5139385 C02.021.002, C02.021.002, MC-ISIN3-1591-01.01 MCM 1201.01-0684 Nozzle to Steam Drum STEAM GENERATOR 1 D AUXILLARY FEEDWATER NOZZLE.Drawing MCM 1201.01-0735 shows diameter of nozzle as 21.740(+0.000 1-0.015) where it welds to steam drum, and the thickness listed is the thickness of the steam generator. Examiner may use either MT or PT for examination. Category C-C Ml.C3.10.0004 1REGHX-SUPPORT Class 2 NV MCM 1201.06-0061 MCM 1201.06-0069 NDE-35 PT SS 0.250 1 0.000 C03.010.004 REGENERATIVE HEAT EXCHANGER SUPPORT WELDED ATTACHMENT Code Case N-700 requires only one welded attachment on a component to be examined. For the Regenerative Heat Exchanger Welded Attachment one of the bracket-to-shell connections is required to be examined. Unless otherwise recommended due to radiological considerations, the welded attachment that shall be examined is the bracket shown on drawing MCM 1201.06-015 at the right end of the middle heat exchanger Shell No. II. (Facing the name plate right side) Reference PIP G-08-00499 ACA#2 and CA#5.The vendor drawing (MCM 1201.06-15), as specified in the 1SI Plan, shows the component 180 degrees out from the as installed configuration in the field. Insulation was removed and there was not an integral attachment located at this location as specified on the drawing.Reference PIP M-10-2588 for additional information concerning this exam.This examination moved from EOC-20 to EOC-21 per Plan Addenda 1MNS-070. 00 1-MCA-NV-H459 Ml .C3.20.0057 Rigid Restraint Ml .C3.20.0072 Rigid Support Class 2 NV MCSRD-NVDIsht. 1 MC-ISIN3-1554-03.01 1-MCA-NV-H459 NDE-35 PT SS 0.125 /0.000 C03.020.05E Welded Attachment, inspect with M1.F1.20.0615. The Thickness 0.125 listed is a reference used to identify support as having a welded attachment since thickness can't be determined using the support sketch. If exact dimension is needed a field measurement will be required.1-MCA-CF-H205 Class 2 CF MCSRD-CFC/sht. 12 MC-ISIN3-1591-01.01 1-MCA-CF-H205 NDE-25 MT CS 0.594 1 0.000 C03.020.01" Welded Attachment, inspect with M1 F11.20.1177 SDQA Cat "C"------ ......Printed 01/12/12 GJU8302 v. 06/18/09 McGuire 1 1/12/2012 6:31:02 AM Page 18 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Category C-C Ml .C3.20.0075 Spring Hgr Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Class I System Description Comments ThickINPS Cal Blocks Componenet ID 2 1-MCA-ND-H31 Class 2 ND MCSRD-FWA/sht. 6 MC-ISIN3-1561-01.00 1-MCA-ND-H31 NDE-35 PT SS.0.237 1 0.000 C03.020.02 Welded Attachment, inspect with M1 FY1.20.0327 Ml .C3.20.0112 1-MCA-CA-H 186 Class 2 CA MCSRD-CAOIsht. 2 MC-ISIN3-1592-01.00 NDE-35 PT SS 0.125 /0.000 C03.020 Rigid Support Welded Attachment. The Thickness 0.125 listed is a reference used to identify support as having a welded attachment since thickness can't be determined using the support sketch. If exact dimension is needed a field measurement will be required.Welded Attachment, inspect with M1.F1.20.1449. Category C-G M1 .C6.20.0027 I NV-237-1 Class 2 NV MCM 1205.00-1186 MC-ISIN3-1554-03.01 NDE-35 PT SS.438/3.000 Seat Ring Insert To Valve Body NV Valve Group 1. Examine weld on inlet side of valve.These valves added as a result of PIP G-09-0921 CA#9.Ml .C6.20.0028 1 NV-237-2 Class 2 NV MCM 1205.00-1186 MC-ISIN3-1554-03.01 NDE-35 PT SS.438/3.000 Seat Ring Insert To Valve Body NV Valve Group 1. Examine weld on outlet side of valve.These valves added as a result of PIP G-09-0921 CA#9.M1 .C6.20.0031 1 NV-244A-1 Class 2 NV MCM 1205.00-0142 MC-ISIN3-1554-03.00-NDE-35 PT SS.438/3.000 Seat Ring Insert To Valve Body NV Valve Group 2. Examine weld on inlet side of valve.These valves added as a result of PIP G-09-0921 CA#9.The Thickness listed is based on pipe size connected to valve and should only be used as a reference since thickness can't be determined using the vendor drawing. If exact dimension is needed a field measurement will be required.Printed 01/12/12 GJU8302 v. 06118109 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 19 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category C-G M1 .C6.20.0032 Component ID ISO/DWG Numbers Class I System Procedure Insp Req Material Sched ThicklNPS Description Comments Cal Blocks Componenet ID 2 1 NV-244A-2 Class 2 NV MCM 1205.00-0142 MC-ISIN3-1554-03.00 NDE-35 PT SS.438/3.000 Seat Ring Insert To Valve Body NV Valve Group 2. Examine weld on outlet side of valve.These valves added as a result of PIP G-09-0921 CA#9.Category D-A M1 .D1.20.0058 Spring Hgr M1 D)1.20.0065 Rigid Support Category F-A M1.F1.10.0022 Spring Hgr M1.F1.10.0023 Rigid Support 1-MCA-CA-H84 Class 3 CA MCSRD-CAJ/sht. 1 MC-ISIN3-1592-01.01 1-MCA-CA-H84 1-MCA-RN-H301 Class 3 RN MCSRD-RN-315 MC-ISIN3-1574-02.00 1-MCA-RN-H301 NDE-65 VT-1 NA 0.125/8,000 D01.020.00' Welded Attachment, inspect with Ml .Fl.30.1107 NDE-65 VT-1 NA 0.125 /8.000 D01.020.07' Welded Attachment, inspect with M1.F1.30.0910 1-MCR-NC-550 Class 1 NC MCSRD-NC-03/sht. 1 1 -MCR-NC-885 Class 1 NC MCSRD-WL-02/sht. 1 NDE-66 VT-3 NA 0.000 / 4.000 F01.010.022C NDE-66 VT-3 NA 0.000 /2.000 F01.010.023/ M1.F1.10.0025 Mech Snubber M1.F1,10.0031 Spring Hgr MI.F1.10.0050 Rigid Restraint 1 -MCR-NC-891 Class 1 NC MCSRD-WL-02/sht. 1 1-MCR-ND-514 Class 1 ND MCSRD-ND-01/sht. 1 1 -MCR-NI-730 Class 1 NI MCSRD-NI-09/sht. 1 NDE-66 VT-3 NDE-66 VT-3 NDE-66 VT-3 NA NA NA 0.000 / 2.000 F01.010.025C 0.000 114.000 F01.010.056C 0.000 / 2.000 McGuire 1 1/12/2012 6:31:02 AM F01.010.119E Page 20 of 50 Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category F-A M1.F1.10.0051 Hyd Snubber Ml .F1.10,0052 Mech Snubber M1.F1.10.0053 Spring Hgr M1.F1.10.0058 Rigid Restraint M1.Fl 10.0059 Rigid Restraint M1.F1.20.0021 Spring Hgr M1 .F1.20.0023 Rigid Support M11F1.20.0024 Mech Snubber M1 .F1.20.0025 Rigid Support Component ID ISOIDWG Numbers Class I System Procedure Insp Req Description Comments Material Sched ThickINPS Cal Blocks Componenet ID 2 1-MCR-NI-733 Class 1 NI MCSRD-NI-09/sht. 1 NDE-66 VT-3 NA 0.000 /2.000 F01.010.120C 1-MCR-NI-858 Class 1 NI MCSRD-NI-16/sht. 1 1-MCR-NI-913 Class 1 NI MCSRD-NI-14/sht. 1 1-MCR-NV-859 Class 1 NV MCSRD-NV-09/sht. 1 1-MCR-NV-895 Class 1 NV MCSRD-NV-07/sht. 1 NDE-66 VT-3 NA 0.000/1.500 F01.010.121C NDE-66 VT-3 NDE-66 VT-3 NDE-66 VT-3 NA NA NA NA 0.000 1 1.500 F01.010.122C 0.000 / 1.500 F01.010.155E 0.000 / 2.000 F01.010.1 56E 1-MCA-FW-H1O Class 2 FW MCSRD-FWAIsht. 1 MC-ISIN3-1571-01.00 NDE-66 VT-3 0.000 124.000 F01.020.102C 1-MCA-FW-H 11 Class 2 FW MCSRD-FWA/sht. 1 MC-ISIN3-1571-01.00 NDE-66 VT-3 NA 0.000 / 24.000 F01.020.104/ 1-MCA-FW-H 111 Class 2 FW MCSRD-FWA/sht. 1 MC-ISIN3-1571-01.00 1-MCA-FW-H127 Class 2 FW MCSRD-FWA/sht. 1 MC-ISIN3-1571-01.00 NDE-66 VT-3 NA 0.000 /24.000 F01.020.105C NDE-66 VT-3 NA 0.000 / 24.000 F01.020.106/ Ml.F1.20.0033 Rigid Restraint 1-MCA-FW-H2 Class 2 FW MCSRD-FWA/sht. 1 MC-ISIN3-1571-01.00 NDE-66 VT-3 NA 0.750 124.000 F01.020.114E Printed 01/12/12 GJU8302 v.06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 21 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category F-A M1 .F1.20.0036 Hyd Snubber M11 F1.20.0037 Hyd Snubber Component ID ISOIDWG Numbers Class I System Procedure Description Comments Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 1-MCA-FW-H122 Class 2 FW MCSRD-FWA/sht. 6 MC-ISIN3-1571-01.00 1-MCA-FW-H110 Class 2 FW MCSRD-FWA/sht. 1 MC-ISIN3-1571-01.00 NDE-66 VT-3 NA 0.000 1 18.000 F01.020.113C NDE-66 VT-3 NA 0.000 124.000 F01.020.112C MI.F1.20.0094 1-MCR-NI-788 Class 2 NI MCSRD-NI-09/sht. 3 Rigid Support MC-ISIN3-1562-03.00 M1.F1.20.0095 1-MCR-NI-823 Class 2 NI MCSRD-NI-08/sht. 2 Rigid Support MC-ISIN3-1562-03.00 Ml. Fl .20.0096 1-MCR-NI-826 Class 2 NI MCSRD-NI-08/sht. 1 Rigid Restraint MC-ISIN3-1562-03.00 NDE-66 VT-3 NA 0.000/4.000 F01.020.229/ NDE-66 VT-3 NA 0.00014.000 F01.020.230/ NDE-66 VT-3 NA 0.000 /2.000 F01.020.231E M1 .F1.20.0097 Rigid Support M1 .F1.20.0099 Rigid Restraint M1.F1.20.0121 Rigid Support 1 -MCR-NI-853 Class 2 NI MCSRD-NI-15/sht.1 MC-ISIN3-1562-01.00 1-MCR-NI-898 Class 2 NI MCSRD-NI-13/sht.1 MC-ISIN3-1562-01.00 1-MCR-NS-659 Class 2 NS MCSRD-NS-04/sht. 2 MC-ISfN3-1563-01.00 NDE-66 VT-3 NDE-66 VT-3 NA NA 0.000 / 3.000 F01.020.232/ 0.000 13.000 F01.020.234E NDE-66 VT-3 NA 0.000 / 8.000 F01.020.274/ M1.F1.20.0122 Rigid Support 1-MCR-NS-679 Class 2 NS MCSRD-NS-04/sht. 2 MC-ISIN3-1563-01.00 NDE-66 VT-3 NA 0.000 /8.000 F01.020.2751 M11F1.20.0123 Rigid Support 1-MCR-NS-709 Class 2 NS MCSRD-NS-05/sht. 2 MC-ISIN3-1563-01.00 NDE-66 VT-3 NA 0.000 / 8.000 F01.020.276/ Printed 01/12/12 GJU8302 v. 06/18/09... .......SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 22 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Category F-A M1 .Fl.20.0124 Rigid Support M1 .F1.20.0327 Spring Hgr Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 1-MCR-NS-714 Class 2 NS MCSRD-NS-05/sht. 2 NDE-66 VT-3 NA MC-ISIN3-1563-01.00 0.000 / 8.000 F01.020.277W M1 .F1.20.0398 Rigid Restraint M1 .F1.20.0590 Hyd Snubber MI .F1.20.0615 Rigid Restraint M1 .F1.20.0639 Mech Snubber M1 .F1.20.0782 Rigid Support M1.F1.20.1171 Spring Hgr M1.Fl.20.1177 Rigid Support 1 -MCA-ND-H31 Class 2 ND MCSRD-FWA/sht. 6 MC-ISIN3-1561-01.00 1-MCR-VQ-541 Class 2 VQ MCSRD-VQ-01/sht. 1 MC-ISIN3-1585-01.00 1-MCA-NV-H433 Class 2 NV MCSRD-NVA/sht. 9 MC-ISIN3-1554-01.00 1-MCA-NV-H459 Class 2 NV MCSRD-NVD/sht. 1 MC-ISIN3-1554-03.01 NDE-66 VT-3 NA 0.237 / 14.000 Inspect with Ml .C3.20.0075 F01.020.178C NDE-66 VT-3 NA 0.000/ 6.000 F01.020.655E NDE-66 VT-3 NA 0.000 13.000 F011.020.342C NDE-66 VT-3 NA 0.125/8.000 F01.020.344E Inspect with Ml .C3.20.0057 1 -MCA-NV-H5608 Class 2 NV MCSRD-NVD/sht. 2 NDE-66 VT-3 MC-ISIN3-1554-03.01 NA NA 0.000 / 8.000 F01.020.343C 1-MCR-NI-505 Class 2 NI MCSRD-NI-01/sht. 1 MC-ISIN3-1562-03.01 1-MCR-CA-H397 Class 2 CA MCSRD-CAN/sht. 1 MC-ISIN3-1592-01.00 1-MCA-CF-H205 Class 2 CF MCSRD-CFC/sht. 12 MC-ISIN3-1591-01.01 NDE-66 VT-3 0.000 / 6.000 F01.020.233i NDE-66 VT-3 NA 0.000 16.000 F01.020.005C NDE-66 VT-3 NA 0.594 / 18.000 F01.020.0551 Inspect with Ml .C3.20.0072 ... .... ...... ..Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 23 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category F-A M1.F1.20.1179 Rigid Support M1,F1.20,1194 Rigid Support Component ID ISO/DWG Numbers Class I System 1-MCR-CF-H400 Class 2 CF MCSRD-CFC/sht. 12 MC-ISIN3-1591-01.01 1-MCA-ND-H302 Class 2 ND MCSRD-NDA/sht. 4 MC-ISIN3-1561-01.00 Procedure Description Comments Insp Req Material Sched Thick/NPS Cal Blocks Componenet ID 2 NDE-66 VT-3 NA 0.000 1 24.000 F01.020.057/ NDE-66 VT-3 NA 0.000 1 8.000 F01.020.1751 M1.F1.20.1195 Hyd Snubber M1.F1.20.1196 Rigid Support M1.F1.20.1216 Rigid Support M1.F1.20.1226 Mech Snubber Mi.F1.20.1263 Rigid Support M1.F1.20.1264 Rigid Support M1.F1.20.1265 Rigid Support 1-MCA-ND-H304 Class 2 ND MCSRD-NDA/sht. 5 MC-ISIN3-1561-01.00 1-MCA-ND-H330 Class 2 ND MCSRD-NDA/sht. 7 MC-ISIN3-1561-01.00 NDE-66 VT-3 NA 0.000 / 8.000 F01.020,176C NDE-66 VT-3 NA 0.000 18.000 F01.020.1771 1-MCA-ND-H79 Class 2 ND MCSRD-NDA/sht. 8 MC-ISIN3-1561-01.00 NDE-66 VT-3 NA 0.000 18.000 F01.020.161/ 1 -MCA-CA-H468 Class 2 CA MCSRD-CAP/sht. 2 MC-ISIN3-1592-01.00 1 -MCA-NV-H95 Class 2 NV MCSRD-NVE/sht. 2 MC-ISIN3-1554-02.00 1 -MCA-NV-H 195 Class 2 NV MC-1190-NV-01-03 MC-ISIN3-1554-03.01 1 -MCA-NV-H 197 Class 2 NV MC-1190-NV-01-03 MC-ISIN3-1554-03.01 1-MCA-NV-H274 Class 2 NV MC-1190-NV-01-03 MC-ISIN3-1554-03.01 NDE-66 VT-3 NA 0.000 / 6.000 F01.020.013C NDE-66 VT-3 NA 0.000 / 4.000 FO1.020.337i NDE-66 VT-3 NA 0.000 / 3.000 F01.020.338/ NDE-66 VT-3 NDE-66 VT-3 NA NA 0.000 / 3.000 F01.020.339/ M1.F1.20.1266 Rigid Support 0.000/ 3.000 F01.020.340/ Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 24 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category F-A M1.F1.20.1267 Rigid Support M1.F1.20.1335 Spring Hgr M1.F1.20.1341 Rigid Support M1.F1.20.1342 Rigid Support M1.F1.20.1441 Hyd Snubber Component ID ISO/DWG Numbers Procedure Insp Req Material Sched Class I System Description Comments Thick/NPS Cal Blocks Componenet ID 2 1-MCA-NV-H275 Class 2 NV MC-1190-NV-01-02 MC-ISIN3-1554-02.01 1 -MCA-SM-H1 15 Class 2 SM MCSRD-SMA/sht. 2 MC-ISIN3-1593-01.00 1-MCA-SM-H109 Class 2 SM MCSRD-SMA/sht. 3 MC-ISIN3-1593-01.03 1 -MCA-SM-H 140 Class 2 SM MCSRD-SMA/sht. 5 MC-ISIN3-1593-01.00 1-MCA-CA-H434 Class 2 CA MCSRD-CAO/SHT. 1 MC-ISIN3-1592-01.00 NDE-66 VT-3 NDE-66 VT-3 NA NA 0.000 / 4.000 F01.020.341/ 0.000 / 42.000 F01.020.552C NDE-66 VT-3 NA 0.000 / 36.000 F01.020.560i NDE-66 VT-3 NA 0.000/ 36.000 F01.020.5611 NDE-66 VT-3 NA 0.000 / 4.000 F01.020.021 C M1.F1.20.1442 Mech Snubber 1-MCA-CA-H464 Class 2 CA MCSRD-CAP/SHT. 2 MC-ISIN3-1592-01.00 NDE-66 VT-3 NA 0.000 / 4.000 F01.020.022C M1.F1.20.1449 1-MCA-CA-H 186 Class 2 CA MCSRD-CAO/sht. 2 MC-ISIN3-1592-01.00 NDE-66 VT-3 NA 0.125 / 4.000 F01.020 M1.F1.30.0107 Rigid Support Ml.F1.30.0108 Rigid Support M1.F1.30.0109 Rigid Support Inspect with Ml .C3.20.0112 1 -MCA-RN-2030 Class 3 RN MCSRD-RN-301/SHT.1 NDE-66 VT-3 NA 0.000 / 18.000 F01.030.186i MC-ISIN3-1574-02.00 1-MCA-RN-1343 Class 3 RN MCSRD-RN-301/SHT.2 MC-ISIN3-1574-01.01 NDE-66 VT-3 NA 0.000 130.000 F01.030.187/ 1-MCA-RN-2039 Class 3 RN MCSRD-RN-301/SHT.2 MC-ISIN3-1574-01.01 NDE-66 VT-3 NA 0.000 / 20.000 F01.030.1881 Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 25 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category F-A M 1.F 1.30.0110 Rigid Support MT.F1.30.0111 Rigid Support M1.Fl.30.0112 Rigid Support M1,F1.30.0113 Rigid Support M1.F1.30.0114 Rigid Support M15F1.30.0115 Rigid Support M1 F1.30.0116 Rigid Support M11F1.30.0117 Rigid Support M1.F1.30.0118 Rigid Support M1.F1.30.0119 Rigid Support Component ID ISOIDWG Numbers Class I System Procedure Insp Req Description Comments Material Sched ThicklNPS Cal Blocks Componenet ID 2 1-MCA-RN-H978 Class 3 RN MCSRD-RN-301/SHT.2 MC-ISIN3-1574-01.01 NDE-66 VT-3 NA 0.000 / 20.000 F01.030.1891 1 -MCA-RN-2023 Class 3 RN MCSRD-RN-301/SHT.3 MC-lSIN3-1574-03.00 NDE-66 VT-3 NA 0.000 / 18.000 F01.030.190/ 1-MCA-RN-2327 Class 3 RN MCSRD-RN-301/SHT.4 NDE-66 MC-ISIN3-1574-03.00 1 -MCA-RN-2081 Class 3 RN MCSRD-RN-302 NDE-66 MC-ISIN3-1574-02.00 VT-3 VT-3 NA NA NA 0.000 / 20.000 F01.030.1911 0.000 1 8.000 F01.030.1921 1 -MCA-RN-1075 Class 3 RN MCSRD-RN-303/SHT.1 MC-ISIN3-1574-02.00 1-MCA-RN-1560 Class 3 RN MCSRD-RN-305/SHT.1 MC-ISIN3-1574-01.00 NDE-66 VT-3 0.000 / 8.000 F01.030.193/ NDE-66 VT-3 NA 0.000/ 6.000 F01.030.194/ 1-MCA-RN-2123 Class 3 RN MCSRD-RN-306/SHT.1 NDE-66 VT-3 NA 0.000 / 10.000 MC-ISIN3-1574-03.00 F01.030.195/ 1-MCA-RN-1314 Class 3 RN MCSRD-RN-307/sht.3 MC-ISIN3-1574-03.00 NDE-66 VT-3 NA 0.000 / 36.000 F01.030.196/ 1-MCA-RN-2341 Class 3 RN MCSRD-RN-307/sht.3 MC-ISIN3-1574-03.00 1-MCA-RN-2339 Class 3 RN MCSRD-RN-307/sht.2 MC-ISIN3-1574-02.01 NDE-66 VT-3 NA 0.000 / 20.000 F01.030.197/ NDE-66 VT-3 NA 0.000 / 20.000 F01.030.198/ Printed 01/12/12 GJU8302 v. 06118/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 26 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Com Clas Category F-A M1.F1.30.0120 1-M(Clas Rigid Support M1IF1.30.0121 1-Mi Clas Rigid Support M1.F1.30.0122 1-M(Clas Rigid Support M1.F1.30.0123 1-Mi Clas Rigid Support M1.F1.30.0124 1-Mi Clas Hyd Snubber M1.F1.30.0125 1-Mi Clas Mech Snubber M1.F1.30.0126 1-Mi Clas Spring Hgr M1.F1.30.0778 1-Mi Clas Rigid Support nponent ID ISOIDWG Numbers s I System CA-RN-H993.s 3 RN MCSRD-RN-307/sht.4 MC-ISIN3-1574-03.01 CA-RN-1 105 s 3 RN MCSRD-RN-309/sht.1 MC-ISIN3-1574-01.00 Procedure Description Comments Insp Req Material Sched ThicklNPS Cal Blocks Componenet ID 2 NDE-66 VT-3 NA 0.000 / 36.000 FO1.030.199/ NDE-66 VT-3 NA 0.000/6.000 F01.030.200/ CA-RN-2518 s 3 RN MCSRD-RN-309/sht.3 MC-ISIN3-1574-01.00 CA-RN-2718 s 3 RN MCSRD-RN-312/sht.2 MC-ISIN3-1574-02.00 CA-RN-2335 s 3 RN MCSRD-RN-307/SHT.1 MC-ISIN3-1574-02.01 CA-RN-2468 s 3 RN MCSRD-RN-307/sht.4 MC-ISIN3-1574-03.01 CA-RN-1302 s 3 RN MCSRD-RN-301/SHT.2 MC-ISIN3-1574-01.01 CA-RN-2298 ss 3 RN MCSRD-RN-316 MC-ISIN3-1574-03.00 NDE-66 VT-3 NA 0.000/ 8.000 F01.030.201; NDE-66 VT-3 NA 0.000 /8.000 F01.030.202/ NDE-66 VT-3 NA 0.000 /20.000 F01.030.203C NDE-66 VT-3 NA 0.000 136.000 F01.030.204C NDE-66 VT-3 NDE-66 VT-3 NA NA 0.000/ 20.000 F01.030.205C 0.000 / 8.000 FO1.030.2151 M1.F1.30.0910 Rigid Support 1 -MCA-RN-H301 Class 3 RN MCSRD-RN-315 MC-ISIN3-1574-02.00 NDE-66 VT-3 NA 0.125 / 8.000 F01.030.216/ _________ ~~~~~~~~~Inspect withMlDl .20.0065 ___________________________________ M1.F1.30.1107 Spring Hgr 1 -MCA-CA-H84 Class 3 CA MCSRD-CAJ/sht.1 MC-ISIN3-1592-01.01 NDE-66 VT-3 NA 0.125 /8.000 F01.030.004C Inspect with M1 .D1.20.0058 Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 27 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 Category F-A M1 F1.40.0011 M .F1.40.0074 M1 .Fl.40.0088 1SGC-LATERALS Class 1 NC MC-1070-05.01 MC-ISIN3-1553-01.00 MC-1070-10.01 1ELDHX-SUPPORT Class 2 NV MCM 1201.06-10 MC-ISIN3-1554-01.02 1WNP-SUPPORT-1B2 Class 3 WN MCM 1203.04-0074 MC-ISIN3-1609-07.00 NDE-66 VT-3 NA 0.000 1 0.000 F01.040.005C STEAM GENERATOR 1C LOWER & UPPER LATERALS AND SNUBBERS. REFERENCE DRAWING MCM 1117.03-0055. NDE-66 VT-3 NA 0.375/ 0.000 FO1.040.043E EXCESS LETDOWN HEAT EXCHANGER SUPPORT NDE-66 VT-3 NA 0.000/ 0.000 F01.040.030E DIESEL GENERATOR ROOM SUMP PUMP 1832 SUPPORT.M1.F1.40.0104 1CAPTD-SUPPORT Class 3 CA MCM 1201.05-218 MC-ISIN3-1592-01.01 NDE-66 VT-3 NA 0.000 10.000 F01.040.03(AUXILIARY FEEDWATER PUMP TURBINE DRIVEN SUPPORT.M1.F1.40.0112 1SWIF-SUPPORT-1A Class 2 NV MCM 1201.04-0027 NDE-66 VT-3 NA MC-ISIN3-1554-02.01 0.375 /0.000 F01.040.011E SEAL WATER INJECTION FILTER 1A SUPPORT.Category R-A M1.R1.1 1.0002 1NC1F-1493 Class 1 NC MCFI-1NC34 MC-ISIN3-1553-01.00 Risk Segment NC-02!R01.011.01(Circumferential MC-1676-4.1 PDI-UT-2 UT SS 160 0.281 /1.500 50202 PDI-UT-2-C PDI-UT-2A-M Pipe to SWEEPOLET SEGMENT NC-025.This weld must be ground flush before examination. Contingencies must be addressed to prepare for possible min. wall issues during weld preparation. Printed 01/12112 GJU8302 v.06118/09 SDQA Cat "C" McGuire 1 1/1212012 6:31:02 AM Page 28 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A Ml.R1.11.0003 Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 1NC1F-1615 Class 1 NC Risk Segment NC-02E R01.011.011; MCFI-1 NC44 MC-ISIN3-1553-01.00 PDI-UT-2 UT SS 160 0281 11.500 50202 PDI-UT-2-C PDI-UT-2A-M Circumferential MC-1676-4.1 Pipe to SWEEPOLET SEGMENT NC-026.This weld must be ground flush before examination. Contingencies must be addressed to prepare for possible min. wall issues during weld preparation. M1.R1.11.0004 Circumferential M1.R1.11.0039 Circumferential Terminal End Dissimilar 1NC1F-1613 Class 1 NC Risk Segment NC-02, R01.011.01i MCFI-1NC44 MC-ISIN3-1553-01.00 PDI-UT-2 UT SS 160 0.281 /1.500 PDI-UT-2A-M 50202 PDI-UT-2-C MC-1676-4.1 Pipe to SWEEPOLET SEGMENT NC-027. Cal Block 50202 alternate block.This weld must be ground flush before examination. Contingencies must be addressed to prepare for possible min. wall issues during weld preparation. 1SGC-OUTLET-W6SE Class 1 NC MC1676-4 MCM 1201.01-0782 Risk Segment NC-007 R01.011.00, PDI-UT-10 UT SS-CS 4.64 / 29"l.D. 5149697 5158172 MCM 1201.01-0769 Nozzle to Safe End STEAM GENERATOR 1C OUTLET NOZZLE. DRAWING # MC-ISiN3-1553-01.00. SEGMENT NC-007.The Thickness and NPS listed are shown on MCM 1201.01-0708. M1.R1.11.0134 Circumferential 1NI1F19 Class 2 NI MCFI-1NI93 MC-ISIN3-1562-03.00 Risk Segment NI-04;0.134 16.000 8279-0414 R01.011.07i NDE-998 UT SS TEE TO ELBOW SEGMENT NI-042 This weld changed from RT to UT per PIP M-09-4090. SDQA Cat "C" Printed 01/12/12 GJU8302 v. 06/18/09 McGuire 1 1/12/2012 6:31:02 AM Page 29 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Category R-A Ml.Ri.11.0694 Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 1NI1F249 Class 2 NI Risk Segment NI-062/R01.011 MCFI-1 N175 MC-ISIN-1562-01.00 PDI-UT-2 UT SS 0.531 /4.000 PDI-UT-2-C PDI-UT-2A-M 50275 Circumferential M1.R1.11.2087 Circumferential PEN 351 TO REDUCER This weld replaces M1 .R1.11.0145 (1NI1F364). (1MNS-070). Examination to be done with M1.R1.16.0045. 1WL1F7651 Class 2 WL Risk Segment WL-002A R01.011.22" MCFI-1WL127 MC-ISIN3-1565-01.00 NDE-12 RT SS 0.120 / 4.000 PIPE TO PIPE SEGMENT WL-002A.This weld requires RT that must be performed EOC-21 see PIP M-10-0514. Examination to be done with M1.R1.16.0048 M1.R1.11.2088 Circumferential 1WLP679-1 Class 2 WL Risk Segment WL-002P R01.011.22; MCFI-1WL127 MC-ISIN3-1565-01.00 NDE-12 RT SS 0.120 / 4.000 ELBOW TO PIPE SEGMENT WL-002A.This weld requires RT that must be performed EOC-21 see PIP M-10-0515. Examination to be done with M1.R1.16.0049 M1.R1.11.2089 Circumferential 1WL1F3063 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-009A R01.011.22; NDE-12 RT SS 0.134 / 6.000 PIPE TO FLANGE SEGMENT WL-009A.This weld requires RT that must be performed EOC-21 see PIP M-10-0518. Examination to be done with M1.R1.16.0050. M1.R1.11.2090 Circumferential 1WL1 F3062 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-01O0A R01.011.221 NDE-12 RT SS 0.134 / 6.000 PIPE TO ELBOW SEGMENT WL-01 OA.This weld requires RT that must be performed EOC-21 see PIP M-10-0517. Examination to be done with M1.R1.16.0051 Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 30 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 Category R-A M1 .R1.1 1.2093 Circumferential 1WL1F3060 Class 2 WL Risk Segment WL-010a R01.011 MCFI-1WL84 MC-ISIN-1565-07.00 NDE-12 RT SS 0.134 /6.000 PIPE TO ELBOW This weld was examined in EOC-21 as an elective examination for segment WL-010A per station request. Examination to be done with M1.R1.16.0062, this examination is not required for Risk Informed report totals.M1.R1.11.2095 Circumferential 1WL1F3069 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-010, 0.134 / 6.000 R01.011 NDE-12 RT SS ELBOW TO ELBOW This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used. This weld is an additional sample for weld 1WL1F3063. For additional information on this item see PIP M-11-07444. This weld to be done with Summary Number MI.R1.16.0061. M1.R1.1 1.2099 1 NVP624-5 Class2 NV MCFI-1NV13 MC-ISIN3-1554-03.01 Risk Segment NV-001 R01.011.13" PDI-UT-2 UT SS 0.148/8.000 PDI-UT-2-C PDI-UT-2A-M 8279-0415 Circumferential ELBOW TO PIPE SEGMENT NV-001.This weld changed from RT to UT per PIP M-09-4090. Examination to be done with M1 .RI.16.0042. M1.R1.1 1.2100 1NV1F2886 Class2 NV MCFI-1NV13 MC-ISIN3-1554-03.01 Risk Segment NV-002A, R01.01 1.13;PDI-UT-2 UT SS 0.148/8.000 PDI-UT-2-C PDI-UT-2A-M 8279-0415 Circumferential PIPE TO ELBOW SEGMENT NV-002AA.This weld changed from RT to UT per PIP M-09-4090. Examination to be done with M1.R1.16.0043. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 31 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A Ml.R1.11.2111 Component ID ISO/DWG Numbers Class / System 1NV1FW175-31 Class2 NV MCFI-1NV175 MC-ISIN3-1554-03.00 Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 Risk Segment NV-019AE R01.01 1.14'PDI-UT-2 UT SS 0.344 / 2.000 8279-0410 PDI-UT-2-C PDI-UT-2A-M Circumferential REDUCER TO PIPE SEGMENT NV-019AB.Examination to be done with M1.R1.16.0017. M1.R1.11.2119 Circumferential 1WL1F3059 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-010, R01.01 1.22,!NDE-12 RT SS 0.134 /6.000 ELBOW TO PIPE SEGMENT WL-010A. Rescheduled from EOC-18 to EOC-19 per station. Reference PIP M-07-2311 and M-07-2308. Reference PIP M-08-05999. This weld requires RT that must be performed EOC-21 see PIP M-10-0516. Examination to be done with MI.R1.16.0052. M1.R1.11.2123 Circumferential Terminal End 1RCHP-IN Class 2 NV MCFI-1NV144 MC-ISIN3-1554-03.00 MCM 1201.05-0301 Risk Segment NV-108A R01.011.161, NDE-12 RT SS 0.237 / 4.000 Flange to Pump RECIPROCATING CHARGING PUMP. SEGMENT NV-108A.*SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS. This weld is located on the Reciprocating Charging Pump, downstream of the Reciprocating Charging Pump Suction Stabilizer, at the Reciprocating Charging Pump Inlet Flange to Pump Body. See instructional manual MCM 1201.05-0301 for additional information. Examination to be done with M1.R1.16.0047 M 1.R 1.11.2161 1NVIFW175-18 Class 2 NV MCFI-1NV175 MC-ISIN3-1554-03.00 Risk Segment NV-020AE R01.01 1.14i PDI-UT-2 UT SS 0.344 / 2.000 8279-0410 PDI-UT-2-C PDI-UT-2A-M Circumferential Reducer to Pipe SEGMENT NV-020AE.Examination to be done with M1.R1.16.0024. Printed 01112/12 GJU8302 v. 06118109 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 32 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1,R1.11.2171 Component ID ISO/DWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 1NV1 FW53-26 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-081 R01.01 1.15<`PDI-UT-2 UT SS 0.436 1 2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0411 Circumferential PIPE TO PIPE SEGMENT NV-081.Examination to be done with M1.R1.16.0032. M1.R1.11.2172 1 NV1 FW53-30 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-08.R01.011.16(PDI-UT-2 UT 55 0.436 /2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0411 Circumferential M1.R1.11.2297 PIPE TO PIPE SEGMENT NV-082.Examination to be done with M1.R31.16.0034. 1 NV50-4 Class 2 NV MC-ISIN3-1554-03.01 MCF1-1NV9 Risk Segment NV-002A R01.011 PDI-UT-2 UT SS 10 0.148/8.000 PDI-UT-2-C PDI-UT-2A-M 8279-0415 Circumferential Pipe to Elbow SEGMENT NV-OO2AA.Examination to be done with M1.R1.16.0058. M1.R1.11.2427 Circumferential IWLIF3048 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-010A R01.011 NDE-12 RT SS 0.134 / 6,000 ELBOW TO FLANGE This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used. This weld is an additional sample for weld 1WL1 F3063. For additional information on this item see PIP M-11-07444. This weld to be done with Summary Number M1.R1.16.0059. ... .. .. ...... .-.. .1 .1 .. ....... .... ...... ...-Printed 01/12112 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 33 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Nun Category R-A M1.R1.11.2428 Circumferential m Component ID ISO/DWG Numbers Class I System 1WLIF3049 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Procedure Insp Req Material Sched Thick/NPS Description Comments Cal Blocks Componenet ID 2 Risk Segment WL-010P R01.011 NDE-12 RT SS 0.134 / 6.000 PIPE TO ELBOW This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used. This weld is an additional sample for weld 1WL1 F3063. For additional information on this item see PIP M-1 1-07444. This weld to be done__with Summary Number Ml RI.16.00600...... M1.R1. 11.2429 1 NV1 FW53-33 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-08;R01.0101.16" PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0410 Circumferential M1,R1.11.2430 PIPE TO PIPE SEGMENT NV-082.Examination to be done with M1.R1.16.0035. 1 NV1 FW53-40 Class 2 NV MCFI-1NV53 Risk Segment NV-08 R01.01 1.16;PDI-UT-2 UT SS MC-ISIN3-1554-01.02 0.436 / 2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0411 Circumferential PIPE TO PIPE SEGMENT NV-083.Examination to be done with MI.R1.16.0036. M1.R1.1 1.2431 1NV1 FW53-41 Class 2 NV Risk Segment NV-08 R01.01 1.16," MCFI-1 NV53 MC-ISIN3-1554-01.02 PDI-UT-2 UT SS 0.344 /2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0410 Circumferential PIPE TO PIPE SEGMENT NV-083.Examination to be done with M1.R1.16.0037. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 34 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num C C Category R-A M1..R1.11.2434 1 (omponent ID ISOIDWG Numbers lass I System Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 NV1FW15-1 lIass 2 NV Risk Segment NV-002L MCFI-1NV15 MC-ISIN-1554-03.01 MC-ISIN-1554-05.00 NDE-12 RT SS 0.120 13.000 PIPE TO PIPE This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program.This weld replaces examination scheduled for M1.RI.1 1.2106 (1NVP631-1) the replacement weld allows for better access and exam coverage. See Plan Addendum 1MNS-075 M1.R1.16.0001 1NI1F1134 Class 2 NI Risk Segment NI-05*MCFI-1N121 MC-ISIN3-1562-03.01 PDI-UT-2 UT SS 0.250 / 18.000 PDI-UT-2A-M 50325 PDI-UT-2-C PIPE TO ELBOW SEGMENT NI-059. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Risk Segment NI-05, M1.R1.16.0002 1 N133A-1 Class 2 NI MCFI-1 N121 MC-ISiN3-1562-03.01 PDI-UT-2 UT SS 0.250 / 18.000 PDI-UT-2A-M 50325 PDI-UT-2-C ELBOW TO ELBOW SEGMENT NI-059. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1 .16.0003 1Nl1F1154 Class 2 NI Risk Segment NI-06(MCFI-1 N121 MC-ISIN3-1562-03.01 PDI-UT-2 UT SS 0.250 / 18.000 PDI-UT-2A-M 50325 PDI-UT-2-C PIPE TO ELBOW SEGMENT NI-060. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Printed 01/12/12 GJU8302 v.06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 35 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1.R1.16.0004 Component ID ISOIDWG Numbers Procedure Insp Req Material Sched Class I System Description Comments Thick/NPS Cal Blocks Componenet ID 2 1N132A-2 Class 2 NI MCFI-1 N121 MC-ISIN3-1562-03.01 PDI-UT-2 UT SS Risk Segment NI-06(0.250/ 18.000 PDI-UT-2A-M 50325 PDI-UT-2-C ELBOW TO ELBOW SEGMENT NI-060. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Remove insulation on RN piping above the NI piping before performing examination on this weld.M1.R1.16.0005 1NI1FW97-1 Class 2 NI Risk Segment NI-061/MCFI-1 N197 MC-ISIN3-1562-01.00 PDI-UT-2 UT SS 0.531 / 4.000 50275 PDI-UT-2-C PDI-UT-2A-M PIPE TO ELBOW SEGMENT NI-061A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1 R 1.16.0006 1NI93-4 Class 2 NI Risk Segment NI-061A MCFI-1NI97 MC-ISIN3-1562-01.00 PDI-UT-2 UT SS 160 0.438 13.000 PDI-UT-2A-M PDI-UT-2-C 50225 Elbow to Reducer SEGMENT NI-061A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Ml Ri.16.0007 1N1267-2 Class 2 NI MCFI-1 N175 MC-ISIN3-1562-01.00 PDI-UT-2 UT SS Risk Segment NI-062/0.438/ 3.000 PDI-UT-2A-M PDI-UT-2-C 50225 REDUCER TO PIPE SEGMENT NI-062A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 36 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1.R1.16.0008 Component ID ISOIDWG Numbers Class I System 1 N1227-6 Class 2 NI MCFI-1N174 MC-ISIN3-1562-01.00 Procedure Insp Req Material Sched Description Comments ThickINPS Cal Blocks Componenet ID 2 Risk Segment NI-063A PDI-UT-2 UT SS 0.438 / 3.000 PDI-UT-2A-M PDI-UT-2-C 50225 REDUCER TO TEE SEGMENT NI-063A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Risk Segment NI-063E M1.R1.16.0009 1N1231-1 Class 2 NI MCFI-1N174 MC-ISIN3-1562-01.00 PDI-UT-2 UT SS 0.281 /1.500 50202 PDI-UT-2-C PDI-UT-2A-M Pipe Butt Weld to Reducer SEGMENT NI-0638B. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0010 1 N1270B-13 Class 2 NI Risk Segment NI-063E MCFI-iN175 MC-ISIN3-1562-01.00 PDI-UT-2 UT SS 0.281 /1.500 50202 PDI-UT-2-C PDI-UT-2A-M Pipe to Reducer SEGMENT NI-0638B. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.RI.16.0011 1NVIFW182-13 Class2 NV MCFI-1NV182 MC-ISIN3-1554-03.00 Risk Segment NV-002E PDI-UT-2 UT SS 0.237 / 4.000 PDI-UT-2A-M PDI-UT-2-C 8279-0416 Tee to Pipe SEGMENT NV-002B. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. ....... .... ...... .. ... .1 ...... ......... .Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 37 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Class I System Category R-A M1.R1.16.0012 1NV1F7900 Class2 NV MCFI-1NV144 MC-ISIN3-1554-03.01 Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 Risk Segment NV-002E PDI-UT-2 UT SS 0.237 /4.000 PDI-UT-2A-M PDI-UT-2-C 8279-0416 Pipe to Elbow SEGMENT NV-002B. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0013 1 NV29-1 Class 2 NV MCFI-1NV185 MC-ISIN3-1554-03.01 Risk Segment NV-011,A PDI-UT-2 UT SS 0.531 / 4.000 50275 PDI-UT-2-C PDI-UT-2A-M PIPE TO ELBOW SEGMENT NV-011A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1 .R 1.16.0014 1NV15-2 Class 2 NV MCFI-1 NV8 MC-ISIN3-1554-03.01 Risk Segment NV-011[Risk Segment NV-011 A PDI-UT-2 UT SS 0.531 /4.000 50275 PDI-UT-2-C PDI-UT-2A-M Tee to Pipe SEGMENT NV-01 1A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.1R1.16.0015 1NV1F12A-12 Class2 NV MCFI-1NV10 MC-ISIN3-1554-03.00 Risk Segment NV-019AA PDI-UT-2 UT SS 0.438 /3.000 50225 PDI-UT-2-C PDI-UT-2A-M TEE TO PIPE SEGMENT NV-019AA. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. ... ....... .........Printed 01112112 GJU8302 v. 06118109...... .. .... ..... ..... ..... ... ................... SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 38 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1.R1.16.0016 Component ID ISO/DWG Numbers Class / System Procedure Insp Req Material Sched Thick/NPS Description Comments Cal Blocks Componenet ID 2 1NV1FW172-28 Class 2 NV MCFI-1NV172 MC-ISIN3-1554-03.00 Risk Segment NV-019AE PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0410 PIPE TO PIPE SEGMENT NV-019AB This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.Rl.16.0017 1NVIFW175-31 Class 2 NV MCFI-1NV175 MC-ISIN3-1554-03.00 Risk Segment NV-019AE PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C PDI-UT-2A-M 8279-0410 REDUCER TO PIPE SEGMENT NV-019AB. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2111. Risk Segment NV-019AC M1.R1.16.0018 1NV1FW175-34 Class2 NV MCFI-1NV175 MC-ISIN3-1554-03.00 PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO REDUCER SEGMENT NV-019AC This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PD1-UT-2 to be used reference PIP M-10-3538. M1 .R1.16.0019 INV1FW173-29 Class2 NV MCFI-1NV173 MC-ISIN3-1554-03.00 Risk Segment NV-019AC PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-019AC This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 39 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Category R-A M1.R1. 16.0020 Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments ThicklNPS Cal Blocks Componenet ID 2 1 NV77-3 Risk Segment NV-020A Class 2 NV MCFI-1NV13 MC-ISIN3-1554-01.01 PDI-UT-2 UT SS 0.438 / 3.000 50225 PDI-UT-2-C PDI-UT-2A-M Pipe to Reducer SEGMENT NV-020A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0021 1NVlFW181-25 Class 2 NV MCFI-1NV181 MC-ISIN3-1554-03.00 Risk Segment NV-020AP PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-020AA This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0022 N V1NFW181-24 Class 2 NV MCFI-INV181 MC-ISIN3-1554-03.00 Risk Segment NV-020M PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-020AA This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Risk Segment NV-020AE Ml.Ri.16.0024 1NV1FW175-18 Class 2 NV MCFI-1NV175 MC-ISIN3-1554-03.00 PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M Reducer to Pipe SEGMENT NV-020AE. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with MI.R1.11.2161. Printed 01/12/12 GJU8302 v. 06/18109 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 40 of 50 This report includes all changes through addendum 1MNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A MI.R1 .16.0025 Component ID ISO/DWG Numbers Class / System 1NVP888-1 Class2 NV MCFI-1NV175 MC-ISIN3-1554-03.00 Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 Risk Segment NV-020AF PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M Reducer to Pipe SEGMENT NV-020AF. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Risk Segment NV-020AF M1.R1.16.0026 1NV1FW173-13 Class2 NV MCFI-1NV173 MC-ISIN3-1554-03.00 PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-020AF. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0027 1NV1F2112 Class 2 NV MCFI-1NV63 MC-ISIN3-1554-01.00 Risk Segment NV-020AC PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO REDUCER SEGMENT NV-020AG. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0028 1NV1F331 Class 2 NV MCFI-1NV5 MC-ISIN3-1554-01.00 Risk Segment NV-0201A PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO REDUCER SEGMENT NV-0201A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. ........... .. .... ....... .. .. ............... ...Printed 01/12/12 GJU8302 v. 06118/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 41 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1.R1.16.0029 Component ID ISO/DWG Numbers Class I System INV3-3 Class 2 NV MCFI-1NV185 MC-ISIN3-1554-03.00 Procedure Insp Req Material Sched Thick/NPS Description Comments Cal Blocks Componenet ID 2 Risk Segment NV-06!PDI-UT-2 UT SS 0.438 / 3.000 50225 PDI-UT-2-C PDI-UT-2A-M ELBOW TO PIPE SEGMENT NV-065. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1.16.0030 INV1F6223 Class2 NV MCFI-1NV145 MC-ISIN3-1554-01.02 Risk Segment NV-077E PDI-UT-2 UT SS 0.344 / 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M REDUCER TO PIPE SEGMENT NV-077B. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1.R1 .16.0031 1 NV1 FW53-27 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-081 PDI-UT-2 UT SS 0.436 12.000 8279-0411 PDI-UT-2-C PDI-UT-2A-M VALVE TO PIPE SEGMENT NV-0811. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. M1 .R1.16.0032 1 NV1 FW53-26 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-081 PDI-UT-2 UT SS 0.436 /2.000 8279-0411 PDI-UT-2-C PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-081. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2171. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 42 of 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC.21)Summary Num Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched ThickINPS Description Comments Cal Blocks Componenet ID 2 Category R-A M1.R1.16.0034 1 NV1 FW53-30 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-08, PDI-UT-2 UT SS 0.436 / 2.000 8279-0411 PDI-UT-2-C PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-082. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2172. M1.R1.16.0035 1 NV1 FW53-33 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-08, Risk Segment NV-08;PDI-UT-2 UT SS 0.344 / 2.000 8279-0410 PDI-UT-2-C PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-082. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2429. Risk Segment NV-08" M1.R1.16.0036 1 NV1 FW53-40 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 PDI-UT-2 UT SS 0.436 / 2.000 8279-0411 PDI-UT-2-C PDI-UT-2A-M PIPE TO PIPE *SEGMENT NV-083. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1 .R1.11.2430. M1.R1.16.0037 1 NV1 FW53-41 Class 2 NV MCFI-1NV53 MC-ISIN3-1554-01.02 Risk Segment NV-08,: PDI-UT-2 UT SS 0.344 /2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M PIPE TO PIPE SEGMENT NV-083. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with Ml .R1.11.2431. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 43 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 Category R-A M1 .R1.16.0038 1 RCPSS-OUT-1 Risk Segment NV-108, Class 2 NV MCFI-1NV144 PDI-UT-2 UT SS 0.237 14.000 8279-0416 MC-ISIN3-1554-03.00 PDI-UT-2-C PDI-UT-2A-M MCM 1201.04-0272 Pipe to Flange RECIPROCATING CHARGING PUMP SUCTION STABILIZER. SEGMENT NV-108A.This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. 1NV1 F479 Risk Segment NV-11O0A Terminal End M1.R1.16.0040 Class 2 NV MCFI-1 NV1 1 MC-ISIN3-1554-03.00 PDI-UT-2 UT SS 0.438 / 3.000 50225 PDI-UT-2A-M PDI-UT-2-C ELBOW TO PIPE SEGMENT NV-110A. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Risk Segment NV-11OE M1 .R1.16.0041 1 NVl F4823 Class 2 NV MCFI-1NV3 MC-ISIN3-1554-03.00 PDI-UT-2 UT SS 0.344 1 2.000 PDI-UT-2-C 8279-0410 PDI-UT-2A-M REDUCER TO PIPE SEGMENT NV-1 10B This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. MI .Ri.16.0042 1 NVP624-5 Class 2 NV MCFI-1NV13 MC-ISIN3-1554-03.01 Risk Segment NV-001 PDI-UT-2 UT SS 0.148 /8.000 8279-0415 PDI-UT-2A-M PDI-UT-2-C ELBOW TO PIPE SEGMENT NV-001.This weld changed from RT to UT per PIP M-09-4090. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2099. Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM. Page 44 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A Ml.R1.16.0043 Component ID ISOIDWG Numbers Class I System 1 NV1 F2886 Class2 NV MCFI-1NV13 MC-ISIN3-1554-03.01 Procedure Insp Req Material Sched ThickINPS Description Comments Cal Blocks Componenet ID 2 PDI-UT-2 UT SS Risk Segment NV-002AP 0.148/ 8.000 8279-0415 PDI-UT-2A-M PDI-UT-2-C PIPE TO ELBOW SEGMENT NV-OO2AA.This weld changed from RT to UT per PIP M-09-4090. This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with Ml.R1.1 1.2100.M1 .R1.16.0045 1NI1F249 Class 2 NI Risk Segment NI-062A MCFI-1 N175 MC-ISIN-1562-01.00 PDI-UT-2 UT SS 0.531 /4.000 PDI-UT-2-C PDI-UT-2A-M 50275 PEN 351 TO REDUCER This weld replaces M1.R1.11.0145 (1Ni1 F364). (1MNS-070) This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.0694. M1.R1.16.0047 Terminal End 1RCHP-IN Class 2 NV MCFI-1NV144 MC-ISIN3-1554-03.00 MCM 1201.05-0301 Risk Segment NV-108A NDE-12 RT SS 0.237 /4.000 Flange to Pump RECIPROCATING CHARGING PUMP, SEGMENT NV-108A.*SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS. This weld is located on the Reciprocating Charging Pump, downstream of the Reciprocating Charging Pump Suction Stabilizer, at the Reciprocating Charging Pump Inlet Flange to Pump Body. See instructional manual MCM 1201.05-0301 for additional information. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2123. SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 45 of 50 Printed 01/12/12 GJU8302 v. 06/18/09 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1.R1.16.0048 Component ID ISO/DWG Numbers Class I System Procedure Insp Req Material Sched ThickINPS Description Comments Cal Blocks Componenet ID 2 IWL1F7651 Class 2 W IL Risk Segment WL-002P MCFI-1WL127 MC-ISIN3-1565-01.00 NDE-12 RT SS 0.120 /4.000 PIPE TO PIPE SEGMENT WL-002A.This weld requires RT that must be performed EOC-21 see PIP M-10-0514. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used reference PIP M-10-3538. Examination to be done with M1 .R1.11.2087. M1.R1.16.0049 1WLP679-1 Class 2 WL MCFI-1WL127 MC-ISIN3-1565-01.00 Risk Segment Risk Segment WL-002P NDE-12 RT SS 0.120 /4.000 ELBOW TO PIPE SEGMENT WL-002A.This weld requires RT that must be performed EOC-21 see PIP M-10-0515. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used reference PIP M-10-3538. Examination to be done with M1 .R1.11.2088. M1.R1.16.0050 1WL1F3063 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-009P NDE-12 RT SS 0.134 / 6.000 PIPE TO FLANGE SEGMENT WL-009A.This weld requires RT that must be performed EOC-21 see PIP M-10-0518. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2089. Risk Segment WL-01OP M1.R1.16.0051 1WL1F3062 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 NDE-12 RT SS 0.134 / 6.000 PIPE TO ELBOW SEGMENT WL-010A.This weld requires RT that must be performed EOC-21 see PIP M-10-0517. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2090. Printed 01/12/12 GJU8302 v. 06/18/09.. ............ .... ......... ............SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 46 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Component ID ISOIDWG Numbers Procedure Insp Req Material Sched Thick/NPS Class I System Description Comments Summary Num Cal Blocks Componenet ID 2 Category R-A Ml.Ri.16.0052 M1.R1.16.0053 1WL1F3059 Risk Segment WL-010A CI IN CI ass 2 WL MCFI-1WL84 NDE-12 RT SS 0.134 /6.000 MC-ISIN3-1565-07.00 ELBOW TO PIPE SEGMENT WL-010A. Rescheduled from EOC-18 to EOC-19 per station. Reference PIP M-07-2311 and M-07-2308. Reference PIP M-08-05999. This weld requires RT that must be performed EOC-21 see PIP M-10-0516. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used reference PIP M-10-3538. Examination to be done with M1.R1.11.2119. 1V39-1 Risk Segment NV-002AE ass2 NV MCFI-1NV8 NDE-12 RT SS 0.134 /6.000 MC-ISIN3-1554-03.01 ELBOW TO ELBOW SEGMENT NV-002AB. Rescheduled from EOC-18 to EOC-19 per station. Reference PIP M-07-1906. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program. Procedure NDE-12 to be used reference PIP M-10-3538.(NOTE) This exam was performed under Summary Number M1.R1.11.2102 during EOC-19. No additional RT examination will be performed during EOC-21.IV37-3 Risk Segment NV-002AE ass2 NV MCFI-1NV8 NDE-12 RT SS 0.134 / 6.000 MC-ISIN3-1554-03.01 ELBOW TO PIPE SEGMENT NV-002AB. Rescheduled from EOC-18 to EOC-19 per station. Reference PIP M-07-1906. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program. Procedure NDE-12 to be used reference PIP M-1 0-3538.(NOTE) This exam was performed under Summary Number M1.R1.11.2103 during EOC-19. No additional RT examination will be performed during EOC-21.M1.R1.16.0054 1N Cl Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 47 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 Category R-A Ml.Rl.16.0055 INV614-1 Class 2 NV Risk Segment NV-020AC MCFI-1 NV5 MC-ISIN-1554-01.00 PDI-UT-2 UT SS 0.344 12.000 8279-0410 PDI-UT-2-C PDI-UT-2A-M MC-ISIN-1554-01.01 FLANGE TO PIPE SEGMENT NV-020AG, This weld replaces weld 1NV1F354 (M1.R1.1 1.1358) for ISI Plan Segment.This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination for Ml.Ri.11.2164 was performed in EOC-16.Ml .R1.16.0056 1RCPA-IN-2 Class 2 NV Risk Segment NV-10*MCFI-1NV11 , MC-ISIN-1554-03.00 MCM-1 201.04-0197 PDI-UT-2 UT SS 0.438 I 3.000 50225 PDI-UT-2A-M PDI-UT-2-C TEE TO PIPE Reference PIP M-07-1351. This summary number is a possible replacement for Summary Number MI.Ri.11.2124 ID# 1RCPA-TE where limited examination coverage (35.4%) was obtained. Only one Summary Number (M1 .R1.11.2410 or Ml .Ri.11.2411) is required for examination. Coverage greated than 90% required to credit examination of one of these welds. The weld crown must be removed before examination can be performed on weld selected for examination. This weld was selected as the replacement for M1.R1.11.2124. This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure PDI-UT-2 to be used reference PIP M-10-3538. Examination for M1.Ri. 1.2411 was performed in EOC-20.Risk Segment NV-002L M1 .Ri.16.0057 INVlFW15-1 Class 2 NV MCFI-1NV15 MC-ISIN-1554-03.01 MC-ISIN-1554-05.00 NDE-12 RT SS 0.120 / 3.000 PIPE TO PIPE This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program. This weld replaces examination scheduled for M1.R1.16.0046 (1NVP631-1) the replacement weld allows for better access and exam coverage. See Plan Addendum 1MNS-075 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 48 of....... ........... .. .... ...... ....... .. .......Printed 01/12/12 GJU8302 v. 06/18/09 50 This report includes all changes through addendum lMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Category R-A M1.R1.16.0058 Component ID ISO/DWG Numbers Class / System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 1 NV50-4 Class 2 NV Risk Segment NV-002AM MC-ISIN3-1554-03.01 MCF1-1NV9 PDI-UT-2 UT SS 10 0.148 / 8.000 8279-0415 PDI-UT-2A-M PDI-UT-2-C Circumferential Pipe To Elbow SEGMENT NV-002AA.This weld is considered (IGSCC) for the Risk Informed Inservice Inspection Program. Examination to be done with Ml. R 1.11.2297. Risk Segment WL-010a M 1 .R 1.16.0059 1WL1F3048 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 NDE-12 RT SS 0.134 / 6.000 ELBOW TO FLANGE This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used. This weld is an additional sample for weld 1WL1F3063. For additional information on this item see PIP M-1 1-07444. This weld to be done with Summary Number MI .R1.11.2427. Risk Segment WL-010a M1.R1.16.0060 1WL1F3049 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 NDE-12 RT SS 0.134 / 6.000 PIPE TO ELBOW This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used. This weld is an additional sample for weld 1WL1 F3063. For additional information on this item see PIP M-11-07444. This weld to be done with Summary Number M1.R1.11.2428. M1.R1.16.0061 1WL1F3069 Class 2 WL MCFI-1WL84 MC-ISIN3-1565-07.00 Risk Segment WL-010P NDE-12 RT SS 0.134 / 6.000 ELBOW TO ELBOW This weld is considered (IGSCC) for Risk Informed Inservice Inspection Program, Procedure NDE-12 to be used. This weld is an additional sample for weld 1WL1F3063. For additional information on this item see PIP M-1 1-07444. This weld to be done with Summary Number M1 RR1.11.2095. M1.R1.16.0062 Circumferential 1WL1F3060 Class 2 WL MCFI-1WL84 MC-ISIN-1565-07.00 Risk Segment WL-010A NDE-12 RT SS 0.134 / 6.000 PIPE TO ELBOW This weld was examined in EOC-21 as an elective examination for segment WL-01OA per station request. Examination to be done with M1.R1.11.2093, this examination is not required for Risk Informed report totals.Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 49 of 50 This report includes all changes through addendum IMNS-087 McGuire 1, 3rd Interval, outage 7 (EOC-21)Summary Num Component ID ISOIDWG Numbers Class I System Procedure Insp Req Material Sched Description Comments Thick/NPS Cal Blocks Componenet ID 2 End of Report S TA TIS TICS ONL Y Class 1 42 Class 2 151 Class 3 27 Total by Class 220 Systems 220 Total Count 220 Printed 01/12/12 GJU8302 v. 06/18/09 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 50 of 50 4.0 Results of Inspections Performed The results of each examination shown in the final Inservice Inspection Plan (Section 3 of this report) are included in this section. The completion date and status for each examination are shown. All examinations revealing reportable indications and any corrective action required as a result are described in further detail in Subsections 4.1 and 4.2. Corrective measures performed and limited examinations are described in further detail in Subsections 4.3 and 4.4.4.1 Reportable Indications EOC 21 (Outage 7) had no reportable indications during this report period, 4.2 Corrective Action Corrective action is action taken to resolve flaws and relevant conditions, including supplemental examinations, analytical evaluations, repair /replacement activities, and corrective measures. There were no recordable conditions that required corrective action during this report period.4.3 Corrective Measures Corrective measures are actions (such as maintenance) taken to resolve relevant conditions, but not including supplemental examinations, analytical evaluations, and repair / replacement activities. Any corrective measures performed for examinations associated with this report period will be shown on the examination data sheets which are on file at the Duke's Corporate Office in Charlotte, North Carolina.4.4 Limited Examinations Limitations (i.e., 90% or less of the required examination coverage obtained)identified for examinations associated with this report period are shown below.A relief request will be submitted to seek NRC acceptance of the limited coverage. This information will be on file at the Duke's Corporate Office in Charlotte, North Carolina.Welds 1NV1F7908 and WI1F3063 had PSI exams performed during 1EOC-21.These welds had less than 90% exam coverage; reference PIP M-1 1-9036 for the limitation coverage on these welds.Outage 7/EOC 21 Refueling Outage Report Page 1 of 2 McGuire Unit 1 Revision 0 Section 4 January 12, 2012 Summary Number M1..B1.21.0001 M1.R1.11.0002 M1.R1.11.0003 Ml.R1.11.0004 M1.Rl.11.2123 M1.R1.16.0009 Ml .R1.16.0025 Ml.R1.16.0031 Ml .R1.16.0047 Description of Limitation Reference PIP M-11-9036 Reference PIP M-1 1-9036 Reference PIP M-11-9036 Reference PIP M-1 1-9036 Reference PIP M-11-9036 Reference PIP M-11-9036 Reference PIP M-11-9036 Reference PIP M-11-9036 Reference PIP M-11-9036 Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 4 Page 2 of 2 Revision 0 January 12, 2012 Scheduleworks DUKE ENERGY CORPORATION QUALITY ASSURANCE TECHNICAL SERVICES Inservice Inspection Database Management System Inspection Results McGuire 1, 3rd Interval Outage 7 (EOC-2)_0C-2_1) Inspection results for EOC-21 Summary No M1..B1.21.0001 Component ID 1 RPV6-446B Insp System Date NC 03/30/07 Insp Insp Geo Status Limited Ref RFR Comment CLR Y N Y UT-n/a This weld was not examined during EOC-21 it was determined no addition coverage could be achieved. Reference PIP M-07-2243 for history on this weld examined during EOC-18. PIP M-11-09036 was written to determine the corrective action for the limited coverage obtained for this item.MI.B10.10.0002 M1.B15.80.0001 M1 .B15.90.0001 M1.B15.90.0002 1PZR-SKIRT NC 09/26/11 CLR N N N MT-11-054 1-RPV-BMI-Nozzles NC 09/20/11 CLR N N N VT-11-623 1 RPV3-445E-SE 1 RPV3-445F-SE NC 10/07/11 CLR N N N VT-11-649 NC 10/07/11 REC N N N VT-11-647 Dried boron on weld inspection area. Reference PIP M-1 1-7710 and WR#1044803 boron and flaking rust were removed.M1.B15.90.0003 1RPV3-445G-SE NC 10/07/11 REC N N N VT-11-646 Dried boron on weld inspection area. Reference PIP M-11-7710 and WR#1044803 boron and flaking rust were removed.M1.115.90.0004 M1.B15.95.0003 1 RPV3-445H-SE 1 RPV3-445C-SE NC 10/07/11 CLR N N N VT-11-650 NC 10/07/11 REC N N N VT-11-648 Dried boron on weld inspection area. Reference PIP M-1 1-7710 and WR#1044803 boron and flaking rust were removed.M1.615.95.0004 1RPV3-445D-SE NC 10/07/11 CLR N N N VT-11-651 Printed 1/12/2012 6:33:57 AM GJU8302 v. 01/01/08 SD(PA Cat "C" McGuire1 1/12/2012 6:31:02 AM Page 1 of 28 Inspection results for EOC-21 Insp Insp Insp System Date Status Limited Geo Ref RFR Comment Summary No Component ID M1.182.12.0002 M1.1B3.100.0009 M1.183. 100.0010 M1.183.100.0011 M1.B3.100.0012 M1.184.10.0001 M1 .B6.110.0001 M1 .86.110.0002 M1.136.110.0007 M1.186.110.0008 M1.87.70.0011 1PZR-9 1RPV1-462A-IR 1RPV1-462B-IR 1RPV1-462C-IR 1RPV1-462D-IR 1RPV-Head 1 SGC-MW-X2-Y1 1SGC-MW-X2-Y2 1 SGB-MW-Xl-Y1 1SGB-MW-X1-Y2 NC NC NC NC NC NC NC NC NC NC NC 09/23/11 09/23/11 09/29/11 09128/11 09/29/11 09/29/11 09/27/11 09/26/11 09/26/11 09/26/11 09/26/11 CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N UT-1 1-220 (Page 1)UT-11-220 (Page 2)VT-1 1-641 VT-1 1-642 VT-1 1-643 VT-1 1-644 VT-1 1-640 VT-1 1-636 VT-1 1-635 VT-1 1-637 VT-1 1-638 VT-11-618 1N1-175 NI 09/19/11 CLR M1.C1.10.0001 1RHR-1A-3-4 ND 11/11/11 CLR N N N VT/n/a Zone 1ND-019L-B completed on this date, which includes this pressure test.Printed 1/12/2012 6:33:57 AM GJU8302 v. 01/01/08 SDOA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 2 of 28 Inspection results for EOC-21 Summary No Ml.Cl.10.0005 Component ID 1RHR-1B-3-4 System ND Insp Date 11/11/11 Insp Status CLR Insp Limited N Geo Ref RFR N N Comment VT n/a Zone 1ND-019L-B completed on this date, which includes this pressure test.Ml .C1.20.0001 5141-3-HD1 NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.MI .C1.20.0002 5141-3-HD2 NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.Ml .C1.20.0006 1 RHR-1 B-2-3 ND 11/11/11 CLR N N N VT n/a Zone 1 ND-01 9L-B completed on this date, which includes this pressure test.1RHR-1A-2-3 Ml.C1.20.0011 ND 11/11/11 CLR N N N VT n/a Zone 1ND-019L-B completed on this date, which includes this pressure test.NV 11/10/11 M1.C1.20.0012 5141-1-HD1 5141-1 -HD2 CLR N N N VT nla Zone 1NV-018L-B completed on this date, which includes this pressure test.Ml.C1.20.0013 NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.M1 .C1.20.0014 5141-2-HDI NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.M1.C1.20.0015 5141-2-HD2 NV 11/10/11 CLR N N N VT n/a Zone INV-018L-B completed on this date, which includes this pressure test.Printed 1/12/2012 6:33:57 AM GJU8302 v. 01101/08 SDQA Cat "C" McGuire 1/12/2012 6:31:02 AM Page 3 of 28 Inspection results for EOC-21 Insp Date Insp Insp Geo Status Limited Ref Summary No M1.C1.30.0006 M1 .C1.30.0007 M1 .C1.30.0008 Component ID 5141-1-NB-TS System RFR Comment NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.5141-1-TS-SH NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.5141-2-NB-TS NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.Ml .C1.30.0009 M1 .C1.30.0010 M1.C1.30.0011 Ml .C2.21.0008 5141-2-TS-SH 5141-3-NB-TS NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.5141-3-TS-SH 1SGD-W259 NV 11/10/11 CLR N N N VT n/a Zone 1NV-018L-B completed on this date, which includes this pressure test.SM SM SM 09/23/11 09/23/11 09/23/11 CLR CLR CLR N N N MT-1 1-053 N N N UT-11-230 Y N N UT-11-231 Page 1 Limitation in axial scans (S1, S2) this is due to adjacent band Y N N UT-11-231 Page 2 Limitation in axial scans (S1, S2) this is due to adjacent band SM 09/23/11 CLR NV 09/23/11 N N Ml .C3.10.0004 1REGHX-SUPPORT CLR N PT-11-040 Printed 1/12/2012 6:33:57 AM GJU8302 v. 01/01/08 SOQA Cat "C' McGuire 1 1/12/2012 6:31 :02 AM Page 4 of 28 Printed 1/12/2012 6:33:57 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 4 of 28 Inspection results for EOC-21 Insp Insp Insp System Date Status Limited Geo Ref RFR Comment Summary No Ml .C3.20.0057 Ml .C3.20.0072 Ml .C3.20.0075 M1.C3.20.0112 M1 0C6.20.0027 Mi .C6.20.0028 M1 .C6.20.0031 Mi .C6.20.0032 MI.D1.20.0058 M .D1.20.0065 M1.F1.10.0022 M1.F1.10.0023 M1.F1.10.0025 Mt.Fi.10.0031 Component ID 1-MCA-NV-H459 1 -MCA-CF-H205 1-MCA-ND-H31 1 -MCA-CA-H 186 1 NV-237-1 1 NV-237-2 1 NV-244A-1 1 NV-244A-2 1-MCA-CA-H84 1-MCA-RN-H301 1-MCR-NC-550 1 -MCR-NC-885 1-MCR-NC-891 I-MCR-ND-514 NV 09/07/11 CF 09/19/11 ND 09/08/11 CA 08/30/11 NV 09/14/11 NV 09/14/11 NV 09/13/11 NV 09/13/11 CA 09/06111 RN 09/12/11 NC 09121/11 NC 09/19/11 NC 09/19/11 ND 09121/11 CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N PT-1 1-031 MT-1 1-052 PT-i 1-032 PT-1 1-030 PT-1 1-033 PT-1 1-034 PT-1 1-035 PT-1 1-036 VT-1 1-581 VT-1 1-580 VT-1 1-626 VT-1 1-612 VT-1 1-616 VT-1 1-627 Printed 1/12/20126:33:57AMGJU8302v.01/01/08 Printed 1/12/2012 6:33:57 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 5 of 28 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 5of28 Summary No M1.F1.10.0050 M 1.F1. 10.0051 MI. Fl. 10.0052 M1.F1.10.0053 Component ID 1-MCR-NI-730 1-MCR-NI-733 1-MCR-NI-858 1-MCR-NI-913 Insp System Date NI 09/19/11 Insp Status REC CLR CLR REC Inspection results for EOC-21 Insp Geo Limited Ref RFR N N N NI NI NI 09/19/11 09/19/11 09/21/11 N N N M1.F1.10.0058 1-MCR-NV-859 NV M1.F1.10.0059 1-MCR-NV-895 NV M1.F1.20.0021 1-MCA-FW-H1O FW M1.F1.20.0023 1-MCA-FW-H11 FW M1.F1.20.0024 1-MCA-FW-H111 FW M1.F1.20.0025 1-MCA-FW-H127 FW M1.F1.20.0033 1-MCA-FW-H2 FW M1.F1.20.0036 1-MCA-FW-H122 FW Printed 1/12/2012 6:33:58 AM GJU8302 v. 01/01/08 09/19/11 CLR N 09/21/11 CLR N 08/29/11 CLR N 08/29/11 CLR N 08/29/11 CLR N 09/07/11 CLR N 08/29/11 CLR N 08/29/11 CLR N N N N N N N N N N Comment VT-11-611 The hanger sketch calls for 1/16" gap between pipe and the top of Item #2. WR# 01044706 was originated to modify existing shims beneath pipe to provide the required clearance. ENG. evaluation: This is not an operability concern, due to accumulation of paint , dust, and rust. This accumulation of material would not impair thermal movement of the pipe.VT-1 1-613 VT-1 1-608 VT-1 1-624 Vertical centedine of spring can is 1.25" from vertical center line of items 3, 4, and 6. EC106606 was written to revise hanger sketch and calculation to update information to show new tolerances. No operability issue for this support VT-11-614 VT-1 1-625 VT-i 1-563 VT-1 1-562 VT-1 1-595 VT-1 1-571 N N N N VT-1 1-593 VT-1 1-596.1 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 6 of 28 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 6 of 28 Inspection results for EOC-21 Insp Insp Insp System Date Status Limited Geo Ref RFR Comment Summary No Component ID M1.F1.20.0037 1 -MCA-FW-H 110 M1.F1.20.0094 1-MCR-NI-788 M1 .F1.20.0095 1-MCR-NI-823 M1.F1.20.0096 1-MCR-NI-826 Ml.Fl.20.0097 1-MCR-NI-853 M1.F1.20.0099 1-MCR-NI-898 M1.F1.20.0121 1-MCR-NS-659 M1.F1.20.0122 1-MCR-NS-679 M1.F1.20.0123 1-MCR-NS-709 M1.F1.20.0124 1-MCR-NS-714 FW 08/29/11 CLR N N N VT-1 1-594 NI 09/21/11 CLR N N N VT-11-629 NI 09/21/11 CLR N N N VT-11-628 NI 09/20/11 CLR N N N VT-11-621 NI 09/19/11 CLR N N N VT-11-610 NI 09/19/11 CLR N N N VT-11-615 NS 09/24111 CLR N N N VT-11-639 NS 09/22/11 CLR N N N VT-11-631 NS 09/19/11 CLR N N N VT-1 1-620 NS 09/22/11 REC N N N VT-11-630 (A) Item #7 pipe clamp is rotated 90 deg. from sketch. (B) Bottom clamp for Item #7 does not have full thread engagement. (C) Item #10 has greater than a 1/16" gap between angle and concrete. Eng. evlauation: (A) Item #7 pipe clamp being rotated 90 deg. does not affect the function and is acceptable. (B) The clamp is tight and bolt not having fullengagement is acceptable since clamp only serves as a spacer. (C) The gap between Item #10 and wall was corrected by W/O 1949262-06. ND 08/29/11 CLR N N N VT-11-564 VQ 09/20/11 CLR N N N VT-1 1-622 M1.F1.20.0327 1-I M1.F1.20.0398 1-MCA-ND-H31 MCR-VQ-541 Printed 1/12/2012 6:33:58 AM GJU8302 v. 01/01/08 McGuire1 1/12/2012 6:31:02 AM Page 7 of 28 SDQA Cat "C" Inspection results for EOC-21 Insp Insp Insp System Date Status Limited Geo Ref RFR Comment Summary No M1 .F1.20.0590 M1.F1.20.0615 M1 Fl1.20.0639 M1 .F1.20.0782 M1.F1.20.1171 M1.F1.20.1177 Ml.Fl.20.1179 M1.F1.20.1194 M1.F1.20.1195 M1.F1.20.1196 M11F1.20.1216 M1.F1.20.1226 M1.F17.20.1263 M1.F1.20.1264 Component ID 1-MCA-NV-H43 1-MCA-NV-H45 1-MCA-NV-H56 1 -MCR-NI-505 1-MCR-CA-H39 1 -MCA-CF-H20 1-MCR-CF-H40 1 -MCA-ND-H3C 1 -MCA-ND-H30 3 NV 09/06111 CLR N N N VT-11-570 9 NV 08/29/11 CLR N N N VT-11-567.08 NV 09/01/11 CLR N N N VT-11-561 NI 09/19/11 CLR N N N VT-1 1-609 17 CA 09/22/11 CLR N N N VT-11-632 5 12 04 CF CF ND ND 1 -MCA-ND-H330 1-MCA-ND-H79 1 -MCA-CA-H468 1-MCA-NV-H95 1-MCA-NV-H195 ND ND CA NV NV 09/07/11 09/23/11 09/01/11 09/14/11 09/13/11 09/02/11 09/14/11 09/02/11 09/02/11 CLR CLR CLR CLR CLR CLR CLR CLR CLR N N N N N N N N N N N N N N N N N N N N N N N N N N N VT-1 1-573 VT-1 1-633 VT-i11-600 VT-1 1-607 VT-1 1-582 VT-11-560 VT-1 1-588 VT-1 1-559 VT-1 1-557 Printed 1/1212012 &33:58 AM GJUB302 v. 01/01/08 SDQA Cat "C" McGuire 1/12/2012 6:31:02 AM Page 8 of 28 Inspection results for EOC-21 Insp Insp Geo Status Limited Ref RFR Comment Summary No M1 .F1.20.1265 M1.Fl.20.1266 Component ID 1-MCA-NV-H 197 1-MCA-NV-H274 Insp System Date NV 08/31/11 CLR N N N VT-11-592 NV 09/02111 CLR M1.F1.20.1267 1-MCA-NV-H275 M1.F1.20.1335 1-MCA-SM-H 15 M1.F1.20.1341 1-MCA-SM-H 109 M1.F1.20.1342 1-MCA-SM-H140 M1.F1.20.1441 1-MCA-CA-H434 M1.F1.20.1442 1 -MCA-CA-H464 M1.F1.20.1449 1-MCA-CA-H186 MI.F1.30.0107 1-MCA-RN-2030 NV SM SM SM CA CA CA RN 09/02/11 09/12/11 09/12/11 09/07/11 09114/11 09/14/11 09/02/11 09/15/11 CLR CLR CLR CLR CLR CLR CLR CLR N N N N N N N N N N N N N N N VT-1 1-556 VT-1 1-604 VT-1 1-578 VT-1 1-577 VT-1 1-597 N N N N N N N N N VT-1 1-591 VT-1 1-590 VT-1 1-575 N N N VT-11-603 M1.F1.30.0108 M1.F1.30.0109 1-MCA-RN-1343 1-MCA-RN-2039 RN 09/14/11 RN 09/14/11 REC N N N VT-11-583 Pipe clamp on item# 1 has loose spacer. Eng. evaluation: Since the correct 2" spacing between clamp ears is present, the loose spacers have no effect on the performance of the pipe clamp and therefore this condition is acceptable as is.No operability concern.N N N VT-11-587 CLR Printed 1/12/2012 6:33:58 AM GJU8302 v. 01/01108 SDOA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 9 of 28 Inspection results for EOC-21 Insp Geo Insp Insp Summary No M1 .F1.30.0110 Mi.Fl.30.0111 Component ID 1-MCA-RN-H978 1-MCA-RN-2023 SJ, ,stem Date Status Limited Ref RFR Comment RN 09/06/11 REC N N N VT-11-552 Rod Item #10 is not carrying load of the pipe, clamp Item #12 spacer is loose.Eng evaluation: WR#01043040 was originated to adjust rod item #10. This is not an operability concern. The spacer is not in the load path of the clamp. The loose spacer does not affect the function of the clamp and does not degrade the clamps ability to support its design loads.RN 09/14/11 CLR N N N VT-11-606 M1.F1.30.0112 1-MCA-RN-2327 M1.F1.30.0113 1-MCA-RN-2081 M1.F1.30.0114 1-MCA-RN-1075 M1.11.30.0115 1-MCA-RN-1560 M1.F1.30.0116 1-MCA-RN-2123 M1.F1.30.0117 1-MCA-RN-1314 M1.F1.30.0118 1-MCA-RN-2341 M1.F1.30.0119 1-MCA-RN-2339 M1.F1.30.0120 1-MCA-RN-H993 M1.F1.30.0121 1-MCA-RN-1105 RN RN RN RN RN RN RN RN RN RN 09/15/11 09/07/11 09/15/11 09/02/11 09/02/11 09/02/11 09/02/11 09/14/11 08/31/11 09/12/11 CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR N N N N N N N N N N VT-1 1-605 VT-1 1-572 VT-1 1-601 VT-1 1-553 VT-1 1-555 VT-1 1-558 VT-1 1-554 VT-1 1-589 VT-1 1-599 VT-1 1-576 M1.F1.30.0122 1-MCA-RN-2518 RN 09/15/11 CLR N N N VT-11-602 Printed 1/12/2012 6:33:58 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuirel 1112120126:31:02AM Page 10 of 28 Inspection results for EOC-21 Insp Insp Insp Geo System Date Status Limited Ref RFR Comment Summary No Mt.Fl.30.0123 Component ID 1-MCA-RN-2718 RN 09/14/11 REC N N N VT-11-584 A pipe cap is wedged between the top ears of the pipe clamp Item# 4. Eng.evaluation: Work Request #1043464 was written to remove the pipe cap from the pipe clamp. The cap is not being gripped by the clamp ears and therefore the cap is not affecting the function of the pipe clamp, this is not an operability concern.M1.F1.30.0124 M1.F1.30.0125 MI.F1.30.0126 1-MCA-RN-2335 1 -MCA-RN-2468 1 -MCA-RN-1302 RN 09/14/11 CLR N N N VT-11-586 RN 09/07/11 CLR N N N VT-11-598 RN 09/14/11 REC N N N VT-11-585 Base plate Item #4 has greater than 1/16" gap between the plate and the concrete at southeast anchor. A review of the record copy of this hanger reveals the bearing area check requirement was waived back in 1980. After additional Engineering review of this information the hanger was determined to be acceptable with the gap beneath the baseplate. This in not an operabilty concer.M1 .Fl.30.0778 Ml .Fl.30.0910 M1.F1.30.1107 M15F1.40.0011 1-MCA-RN-2298 1-MCA-RN-H301 RN 09/02/11 CLR RN 09/12/11 CLR N N N VT-11-574 N N N VT-1 1-579 1-MCA-CA-H84 CA 09/06/11 CLR N N N VT-11-568 1SGC-LATERALS NC 10/05111 REC N N N VT-11-645 Crack like indications at rear bracket, snubber bracket to generator support ring has loose nut. W/O 01952421 / 06 written to re-tighten nut, hair line cracks are acceptable , entered into EDM-410 Structural Inspection Program for future monitoring by Engineering. No operability issue for this support.M1 .Fl.40.0074 1 ELDHX-SUPPORT NV 09/23111 REC N N N VT-11-634 South East anchor has a loose nut. WO# 1952422 was written to re-torque stud and add jam nut. No operability issue since nut is designed for very low torque to allow for movement. (10 ft-lbs.)Printed 1/12/2012 6:33:58 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page I I of 28 Summary No MI .Fl.40.0088 Ml.Fl.40.0104 MI.Fl.40.0112 Component ID 1WNP-SUPPORT-1 B2 ICAPTD-SUPPORT 1SWIF-SUPPORT-lA System WN CA NV Inspection results for EOC-2 Insp Insp Insp Geo Date Status Limited Ref RFR 09/08/11 CLR N N N 09/06/11 CLR N N N 09/12/11 REC N N N 1 Ml .G3.1.0004 M1 .G3.1.0005 1NC1F-107 1 NC-72-1 NC NC NC NC NC NC NC NC NC NC NC 09/22/11 09122/11 09/22/11 09/22/11 09/22/11 09/22/11 09/22/11 09/22/11 09/22/11 09/19/11 09/22/11 CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR CLR Comment VT-1 1-566 VT-1 1-569 VT-1 1-565 Exposed anchors, nuts and washers covered with medium rust. WR# 01043112 was written to clean and coat the rusted anchors. No significant material loss (structural capacity not impaired). No operability issue.PT-1 1-037 UT-11-217 (Page 1)UT-11-217 (Page 2)PT-1 1-038 UT-11-218 (Page 1)UT-1 1-218 (Page 2)PT-1 1-039 UT-11-219 (Page 1)UT-1 1-219 (Page 2)VT-11-619 MI.G3.1.0006 INC-73-1 Ml .G6.2.0001 M1.R1.11.0002 1 PZR-MANWAY 1NC1F-1493 UT-11-221 (Page 1)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.McGuire 1 1/12/2012 6:31:02 AM Page 12 of 28 Printed 1/12/20126:33:59AMGJU8302v.01/01/08 SDQA Cat "C" Inspection results for EOC-21 Insp Insp Insp Geo System Date Status Limited Ref Summary No M1.R1.11.0002 Component ID 1NC1F-1493 RFR Comment NC 09/22/11 CLR Y N Y UT-11-221 (Page 2)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NC 09/22/11 CLR Y N Y UT-11-221 (Page 3)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NC 09/22/11 CLR NC 09/22/11 CLR N N N UT-1 1-221 (Page 4)Y N Y UT-11-221 (Page 5)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.M1.R1.11.0003 1NC1F-1615 NC 09/22/11 CLR Y N Y UT-1 1-222 (Page 1)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NC 09/22/11 CLR Y N Y UT-11-222 (Page 2)Limitation due to sweepolet configuration. PIP M-11-09036 was written to determine the corrective action for the limited coverage obtained for this item.NC 09/22/11 CLR Y N Y UT-1 1-222 (Page 3)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NC 09/22/11 CLR NC 09/22/11 CLR N N N UT-11-222 (Page 4)Y N Y IUT-11-222 (Page 5)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Printed 1/12/2012 6:33:59 AM GJU8302 v. 01/01/08 Printed 1/12/2012 6:33:59 AM GJU8302 v. 01/01/08 SDQA Cat 'C" McGuire 1 1/12/2012 6:31:02 AM Page 13 of 28 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 13 of 28 Inspection results for EOC-21 Summary No MIRI1.10004 Component ID 1NC1F-1613 System NC Insp Date 09122111 Insp Status CLR Insp, Limited Y Geo Ref RFR Comment N Y UT-1 1-223 (Page 1)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NC 09/22/11 CLR NC 09122/11 CLR NC 09122111 CLR NC 09/22/11 CLR Y N Y UT-1 1-223 (Page 2)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Y N Y UT-1 1-223 (Page 3)Limitation due to sweepolet configuration. PIP M-11-09036 was written to determine the corrective action for the limited coverage obtained for this item.N N N UT-11-223 (Page 4)Y N Y UT-11-223 (Page 5)Limitation due to sweepolet configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Y N N UT-11-224 (Page 1)Limitation due to nozzle configuration. NC 09/22/11 M RR1.11. 0039 1SGC-OUTLET-W6SE CLR NC 09/22/11 CLR Y N N UT-11-224 (Page 2)Limitation due to nozzle configuration. NC 09/22/11 CLR NC 09/22/11 CLR NC 09/22/11 CLR Y N N UT-1 1-224 (Page 3)Limitation due to nozzle configuration. Y N N UT-1 1-224 (Page 4)Limitation due to nozzle configuration. Y N N UT-11-224 (Page 5)Limitation due to nozzle configuration. Printed 1/12/20126:33:59AMGJU8302v.01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 14 of 28 Inspection results for EOC-21 Insp System Date Insp Insp Geo Status Limited Ref Summary No M 1.R1. 11.0134 M1.R1.11.0694 Component ID RFR Comment N N N UT-11-180 1NI1F19 1NI1F249 NI 09/07/11 CLR NI NI NI NI NI 09/21/11 09/21/11 09/21/11 09/21/11 09121/11 CLR CLR CLR CLR CLR N N N N N N N N N N N N N N N UT-11-215 (Page 1)UT-11-215 (Page 2)UT-11-215 (Page 3)UT-11-215 (Page 4)UT-11-215 (Page 5)M1.RIA 1.2087 IWLI F7651 WL 10/10/11 REC N N N RT-n/a Indication is film artifact determined to be acceptable. 1WLP679-1 M1.R1.11.2088 WL 10/10/11 REC N N N RT-n/a Indication is film artifact determined to be acceptable. M1..R1.11.2089 1WL1F3063 WL 10/05/11 REC N N N RT-n/a Indications are surface, and film artifact determined to be acceptable. M1.R1.11.2090 1WL1F3062 WL 10/05/11 REC N N N RT-n/a Indication is film artifact determined to be acceptable. M1.R1.11.2093 1WLI1F3060 WL 10/09/11 REC N N N RT-n/a Indications are concavity, tungsten, film artifact and sludge determined to be acceptable. M1.R1.1 1.2095 1WL1F3069 WL 10/11/11 REC N RT-n/a Indications are concavity and film artifact determined to be acceptable. McGuire 1 1112/2012 6:31:02 AM Page 15 of 28 Printed 1/12/2012 6:33:59 AM GJU8302 v. 01/01108 SDQA Cat "C" Inspection results for EOC-21 Insp Insp Insp Geo System Date Status Limited Ref RFR Comment Summary No M1.R1.11.2099 Component ID 1 NVP624-5 NV 09105111 CLR N N N UT-11-232 M1.R1.11.2100 1NV1F2886 NV 09/07/11 CLR Y N N UT-1 1-199 (Page 1)No scan in axial direction due to valve 1 NV1 056 and pipe branch for 2" of weld length causing limitation. NV 09107/11 CLR Y N N UT-1l1-199 (Page 2)No scan in axial direction due to valve 1 NV1 056 and pipe branch for 2" of weld length causing limitation. NV 09/07/11 CLR Y N N UT-1i1-199 (Page 3)No scan in axial direction due to valve 1 NVi 056 and pipe branch for 2" of weld length causing limitation. M1. R 1.11.2111 1NVlFW175-31 NV 09/08/11 CLR NV 09/08/11 CLR N N N UT-1 1-182 (Page 1)N N N UT-1l1-182 (Page 2)M1.R1.11.2119 1WL1F3059 WL 10/02/11 REC N N N RT-n/a Indication is punch marks determined to be acceptable. M1.R1.11.2123 1RCHP-IN NV 09/30/11 REC Y N Y RT-n/a Indicationsn are linear and are rejectable. Indications are not service induced and determined to be fabrication type of defects. For additional information see PIP M-11-07358. PIP M-1 1-9036 was written to determine the corrective action for the limited coverage obtained for this item.M1.R1.11.2161 1NVIFW175-18 NV 09/02/11 CLR NV 09/02/11 CLR N N N UT-11-183 (Page 1)N N N UT-11-183 (Page 2)M1.Rl.11.2171 1 NV1FW53-26 NV 09/26/11 CLR N N N UT-11-227 (Page 1)Printed 1/12/20126:33:59AMGJU8302v.01/01/08 Printed 1/12/2012 6:33:59 AM GJU8302 v. 01/01/08 SOQA Cat C McGuire 1 l/12/20126:31:O2AM Page 16 of 28 SDQA Cat "C " McGuirell 1/12/20126:31:02AM Page 16 of 28 Inspection results for EOC-21 Insp Insp Insp Geo System Date Status Limited Ref Summary No M1.R1.11.2171 Component ID 1NV1FW53-26 RFR Comment NV NV NV 09/26/11 09/26/11 09/26/11 CLR CLR CLR N N N N N N N N N UT-1 1-227 (Page 2)UT-11-227 (Page 3)UT-1 1-227 (Page 4)M 1.R1. 11.2172 1NV1 FW53-30 NV NV NV NV 09/30/11 09/30/11 09/30/11 09130/11 CLR CLR CLR CLR N N N N N N N N N N N N UT-11-234 (Page 1)UT-11-234 (Page 2)UT-1 1-234 (Page 3)UT-11-234 (Page 4)M1.RI.11.2297 1NV50-4 NV NV NV 09/14/11 09/14/11 09/14/11 CLR CLR CLR N N N N N N N N N UT-11-203 (Page 1)UT-11-203 (Page 2)UT-11-203 (Page 3)M1.R1.11.2427 1WL1F3048 WL 10/11/11 REC N N N. RT-n/a Indications are concavity, and film artifact determined to be acceptable. M1.R1.11.2428 1WL1F3049 WL 10/11/11 REC N N N RT-n/a Indications are tungsten, convexity, and concavity and film artifact determined to be acceptable. M1.R1.11.2429 1NV1FW53-33 NV 09/20/11 CL NV 09/20/11 CL NV 09/20/11 CL Printed 1/12/2012 6:33:59 AM GJU8302 v. 01/01/08 R R R N N N N N N N N N UT-11-207 (Page 1)UT-1 1-207 (Page 2)UT-1 1-207 (Page 3)SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 17 of 28 Inspection results for EOC-21 Summary No Component ID Insp Insp System Date Status NV 09/20/11 CLR Insp Limited Geo Ref RFR Comment M1.R1.11.2429 1NV1FW53-33 M1.R1.11.2430 1NV1FW53-40 M 1.R1.11.2431 1NV1FW53-41 N N N UT-1 1-207 (Page 4)NV 09/26/11 CLR NV 09/26/11 CLR NV 09/26/11 CLR NV 09/26/11 CLR NV 09/20/11 CLR NV 09/20/11 CLR NV 09/20/11 CLR NV 09120/11 CLR N N N UT-11-225 (Page 1)N N N N N N N N N N N N N N N UT-11-225 (Page 2)N UT-11-225 (Page 3)N UT-1 1-225 (Page 4)N UT-1 1-209 (Page 1)N UT-11-209 (Page 2)N UT-11-209 (Page 3)N UT-1 1-209 (Page 4)M 1.R11.11.2434 1NV1FW15-1 NV 10/03/11 REC N N N RT-n/a Indications are tungsten, concavity, convexity and film artifact determined to be acceptable. M1.R1.16.0001 1N11F1134 MI.R1.16.0002 1 N133A-1 M1.R1.16.0003 1N11F1154 NI 09/06/11 CLR N N N UT-1 1-179 (Page 1)NI 09/06/11 CLR N N N UT-1l1-179 (Page 2)NI 09/07111 CLR N N N UT-11-181 NI 09/09/11 CLR N N N UT-11-184 M1.R1.16.0004 1N132A-2 NI 09/17/11 CLR N N N UT-1 1-205 (Page 1)Printed 1/12/2012 6:33:59 AM GJU8302 v. 01101/08 SDQA Cat "C" McGuire 1/12/2012 6:31:02 AM Page 18 of 28 Inspection results for EOC-21 Summary No M1.R1.16.0004 M1.R1.16.0005 M1.R1.16.0006 Mi.R1.16.0007 Compn 11\1132A.1N1F\11R onent ID Insp System Date Insp Status Insp Limited Geo Ref RFR Comment 1 N193-4 1 N1267 M1.R1.16.0008 1N1227-2 NI 09/17/11 CLR N N N UT-1 1-205 (Page 2)/97-1 NI 09/12/11 CLR N N N UT-11-197 (Page 1)NI 09/12/11 CLR N N N UT-11-197 (Page 2)NI 09/12/11 CLR N N N UT-11-197 (Page 3)NI 09/12/11 CLR N N N UT-11-197 (Page 4)NI 09/12/11 CLR N N N UT-11-200-2 NI 09/21/11 CLR N N N UT-11-213 (Page 1)NI 09/21/11 CLR N N N UT-11-213 (Page 2)-6 NI 09/21/11 CLR N N N UT-11-214 (Page 1)NI 09/21/11 CLR N N N UT-1 1-214 (Page 2)-1 NI 09/21/11 CLR Y N Y UT-11-211 (Page 1)Lift off due to configuration caused limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NI 09/21/11 CLR Y N Y UT-1 1-211 (Page 2)Lift off due to configuration caused limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NI 09/21/11 CLR Y N Y UT-11-211 (Page 3)Lift off due to configuration caused limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.A GJU8302 v. 01/01108 SDQA Cat "C" McGuire 1 111212012 6:31:02 AM Page 19 of 28 1N1231-M1.R1.16.0009 Printed 1112/2012 6:34:00 Ah Inspection results for EOC-21 Summary No M1.Rl.16.0009 Component ID 1 N1231-1 Insp System Date NI 09/21/11 Insp Insp Status Limited Geo Ref RFR Comment CLR Y N Y UT-1 1-211 (Page 4)Lift off due to configuration caused limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Ml.Rl.16.0010 1N1270B-13 NI 09/21/11 CLR NI 09/21/11 CLR N N N UT-11-212 (Page 1)N N N UT-11-212 (Page 2)NI NI 09/21/11 09/21/11 CLR CLR N N N N N N UT-11-212 (Page 3)UT-11-212 (Page 4)M1.R1.16.0011 1NV1FW182-13 NV 08129/11 CLR NV 08/29111 CLR NV 08/29/11 CLR Y N N UT-1l1-173 (Page 1)Throat area of Tee causing limitation. Y N N IUT-11-173 (Page 2)Throat area of Tee causing limitation. Y N N UT-11-173 (Page 3)Throat area of Tee causing limitation. M1.R1.16.0012 Ml.R1.16.0013 1NV1F7900 1 NV29-1 NV NV 09/08/11 09/08/11 CLR CLR N N N N N N UT-11-185 (Page 1)UT-11-185 (Page 2)NV 09/01/11 CLR N N N UT-1 1-186 (Page 1)NV 09/01/11 .CLR N N N UT-11-186 (Page 2)NV 09/01/11 CLR N N N UT-1 1-186 (Page 3)Printed 1/12/2012 6:34:00 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 20 of 28 Inspection results for EOC-21 Insp Insp Insp System Date Status Limited Geo Ref RFR Comment Summary No M1.R1.16.0013 M1.R1.16.0014 M1.R1.16.0015 Component ID 1NV29-1 NV 09/01/11 CLR N N N UT-11-186 (Page 4)1NV15-2 NV NV NV 09/01/11 CLR 09101(11 CLR 09/01/11 CLR NV 09/01/11 CLR NV 09/07/11 CLR N N N UT-11-187 (Page 1)N N N UT-11-187 (Page 2)N N N UT-11-187 (Page 3)N N N UT-11-187 (Page 4)Y N N UT-11-188 (Page 1)Limited due to tee throat.Y N N IUT-11-188 (Page 2)Limited due to tee throat.Y N N UT-1l1-188 (Page 3)Limited due to tee throat.1NVIF12A-12 NV 09/07/11 CLR NV 09/07/11 CLR M1.R1.16.0016 1NV1FW172-28 NV NV 09/02/11 09/02/11 CLR CLR N N N N N N UT-1 1-176 (Page 1)UT-1 1-176 (Page 2)M1.R1.16.0017 M1.R1.16.0018 1NVIFW175-31 NV NV NV 09/08/11 09/08/11 09/02/11 CLR CLR CLR N N N N N N N N UT-1 1-189 (Page 1)UT-11-189 (Page 2)UT-1 1-190 (Page 1)UT-1 1-190 (Page 2)1NVlFW175-34 N N N N NV 09/02/11 CLR Printed 1/12/2012 6:34:00 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 21 of28 Printed 1/12/2012 6:34:00 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 21 of 28 Inspection results for EOC-21 Insp Insp Insp Geo System Date Status Limited Ref Summary No M1.R1.16.0019 Component ID 1NV1FW173-29 RFR Comment NV NV 09/02/11 09/02/11 CLR CLR N N N N N N UT-1 1-177 (Page 1)UT-1 1-177 (Page 2)M1.R1.16.0020 1 NV77-3 NV NV 09/07/11 09/07/11 CLR CLR N N N N N N UT-1 1-191 (Page 1)UT-11-191 (Page 2)M1.R1.16.0021 1NVlFW181-25 NV NV NV 09/12/11 09/12/11 09112111 CLR CLR CLR N N N N N N N N N UT-11-201 (Page 1)UT-1 1-201 (Page 2)UT-11-201 (Page 3)MI .R1.16.0022 1NV1FW181-24 NV NV NV 09/12/11 09/12/11 09/12/11 CLR CLR CLR N N N N N N N N N UT-11-202 (Page 1)UT-11-202 (Page 2)UT-11-202 (Page 3)M1.R1.16.0024 M1 .R1.16.0025 1NV1FW175-18 NV NV 09/02/11 09/02/11 CLR CLR 1 NVP888-1 NV 09/08/11 CLR N N N UT-1 1-192 (Page 1)N N N UT-11-192 (Page 2)Y N N UT-1l1-193 (Page 1)Valve 494 socket weld configuration causing limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Y N N UT-1 1-193 (Page 2)Valve 494 socket weld configuration causing limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.NV 09/08/11 CLR Printed 1/12/2012 6:34:00 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 22 of 28 Summary No M1.R1.16.0025 Component ID 1 NVP888-1 Insp System Date NV 09/08/11 Insp Status CLR Inspection results for EOC-21 Insp Geo Limited Ref RFR Comment Y N Y UT-11-193 (Page 3)Valve 494 socket weld configuration causing limitation. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.M1 ,Ri.16.0026 M1.R1.16.0027 1NVIFW173-13 1NV1F2112 NV 09102111 NV 09/02/11 NV 09/10/11 NV 09/10/11 NV 09/10/11 CLR CLR CLR CLR CLR N N N N N N N N N N N N N N N UT-11-178 (Page 1)UT-1 1-178 (Page 2)UT-11-194 (Page 1)UT-11-194 (Page 2)UT-1i1-194 (Page 3)1 NV1 F331 MlR1.16.0028 NV 09/10/11 NV 09/10/11 NV 09/10/11 CLR CLR CLR N N N N N N N UT-11-195 (Page 1)N UT-11-195 (Page 2)N UT-1l1-195 (Page 3)M1.R1.16.0029 M1.R1.16.0030 Ml.R1.16.0031 1NV3-3 NV 08/29/11 CLR N N N UT-11-171 1NV1 F6223 NV 08/31/11 CLR N N N UT-11-174 1NVl FW53-27 NV 09/20111 CLR Y N Y UT-11-206 (Page 1)Limitation due to valve 1NV35A configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Printed 1/12/2012 6:34:00 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 23 of 28 Inspection results for EOC-21 Summary No M1.R1.16.0031 Component ID 1 NV1 FW53-27 Insp System Date NV 09/20/11 Insp Insp Status Limited Geo Ref RFR Comment NV 09/20/11 NV 09/20/11 CLR CLR CLR Y N Y UT-11-206-(Page 2)Limitation due to valve 1NV35A configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Y N Y UT-11-206 (Page 3)Limitation due to valve 1NV35A configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.Y N Y UT-1 1-206 (Page 4)Limitation due to valve 1NV35A configuration. PIP M-1 1-09036 was written to determine the corrective action for the limited coverage obtained for this item.M1.R1.16.0032 1 NV1 FW53-26 NV NV NV NV 09/26/11 09/26/11 09/26/11 09/26/11 CLR CLR CLR CLR N N N N N N N N N N N N UT-11-228 (Page 1)UT-1 1-228 (Page 2)UT-11-228 (Page 3)UT-1 1-228 (Page 4)M1.R1.16.0034 1 NV1 FW53-30 NV NV NV NV 09/30/11 09/30/11 09/30/11 09/30/11 CLR CLR CLR CLR N N N N N N N N N N N N UT-11-235 (Page 1)UT-1 1-235 (Page 2)UT-1 1-235 (Page 3)UT-1 1-235 (Page 4)M1.R1.16.0035 1 NV1 FW53-33 NV NV 09/20/11 09/20/11 CLR CLR N N N N N N UT-1 1-208 (Page 1)UT-1 1-208 (Page 2)Printed 1/12/2012 6:34:00 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 24 of 28 Printed 1/12/20126:34:OOAMGJU8302v.01/01/08 SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 24 of 28 Inspection results for EOC-21 Insp Insp Insp System Date Status Limited Geo Ref RFR Comment Summary No M1.R1.16.0035 Component ID 1 NV1 FW53-33 NV NV 09/20/11 09/20/11 CLR CLR N N N N N N UT-1 1-208 (Page 3)UT-1 1-208 (Page 4)Ml .Ri.16.0036 1 NV1 FW53-40 NV NV NV NV 09126111 09/26/11 09/26/11 09/26/11 CLR CLR CLR CLR N N N N N N N N N N N N UT-11-226 (Page 1)UT-1 1-226 (Page 2)UT-11-226 (Page 3)UT-11-226 (Page 4)M1.R1.16.0037 1NV1 FW53-41 NV NV NV NV 09/20/11 09/20/11 09/20/11 09/20/11 CLR CLR CLR CLR N N N N N N N N N N N N UT-11-210 (Page 1)UT-11-210 (Page 2)UT-11-210 (Page 3)UT-1 1-210 (Page 4)M1.R1.16.0038 1RCPSS-OUT-1 NV NV 09/28/11 09/28/11 CLR CLR N N N N N N UT-11-229 (Page 1)UT-1 1-229 (Page 2)INVl F479 M1.R1.16.0040 NV 08/31/11 CLR Y N N UT-11-175.9" diameter metal disc TDC 1.3" D/S of weld CL causing limitation. Ml .Ri.16.0041 1NV1 F4823 NV NV NV 08/29/11 08/29/11 08/29/11 CLR CLR CLR N N N N N UT-11-170 (Page 1)N N UT-11-170 (Page 2)N N UT-11-170 (Page 3)Printed 1/12/2012 6:34:01 AM GJU8302 V. 01/01/08 SOQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 25 of 28 Printed 1/12/2012 6:34:01 AM GJU8302 v.SDQA Cat "C" McGuirel 1/12/20126:31:02AM Page 25 of 28 Inspection results for EOC-21 Insp Insp Insp Geo System Date Status Limited Ref Summary No Component ID RFR Comment Ml.Ri.16.0042 Ml.Rl.16.0043 1 NVP624-5 1NV1F2886 NV 09/05/11 CLR N N N UT-11-233 NV 09/07/11 CLR Y N N UT-1l1-198 (Page 1)No scan in the axial direction due to valve 1 NV1 056 pipe branch for 2" of weld length causing limitation. NV 09/07/11 CLR Y N N UT-11-198 (Page 2)No scan in the axial direction due to valve 1NV1 056 pipe branch for 2" of weld length causing limitation. NV 09/07/11 CLR Y N N UT-11-198 (Page 3)No scan in the axial direction due to valve 1 NV1 056 pipe branch for 2" of weld length causing limitation. M1.R1.16.0045 1NI1F249 NI 09/21/11 CLR NI 09/21/11 CLR NI 09/21/11 CLR NI 09/21/11 CLR NI 09/21/11 CLR NV 09/30/11 REC N N N UT-11-216 (Page 1)N N N UT-11-216 (Page 2)N N N UT-11-216 (Page 3)N N N UT-11-216 (Page 4)N N N UT-11-216 (Page 5)M1.R1.16.0047 1RCHP-IN Y N Y RT n/a Indications are linear and are rejectable. Indications are not service induced and determined to be fabrication type of defects. For additional information see PIP M-1 1-07358.PIP M-11-9036 was written to determine the corrective action for the limited coverage obtained for this item.M1.R1.16.0048 1WL1F7651 WL 10/10/11 REC N N N RT-n/a Indication is film artifact determined to be acceptable. Printed 1/12/2012 6:34:01 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 26 of 28 Inspection results for EOC-21 Insp Insp Insp Geo Date Status Limited Ref Summary No Component ID System RFR Comment M1.R1.16.0049 1WLP679-1 WL 10/10/11 REC N N N RT-n/a Indication is film artifact determined to be acceptable. M1.R1.16.0050 1WL1F3063 WL 10/05/11 REC N N N RT-n/a Indications are surface, and film artifact determined to be acceptable. M1.R1.16.0051 1WL1F3062 WL 10/05/11 REC N N N RT-n/a Indication is film artifact determined to be acceptable. M1.R1.16.0052 1WL1F3059 WL 10/02/11 REC N N N RT-n/a Indication is punch marks determined to be acceptable. M1.R1.16.0053 1 NV39-1 NV 10/08/08 REC N N N RT-n/a Indication is film artifact determined to be acceptable. Note: This exam was performed under Summary Number M1.R1.11.2102 during EOC-19. No additional RT examination was performed during EOC-21.M1.R1.16.0054 1 NV37-3 NV 10/11/08 REC N N N RT-n/a Indication is film artifact determined to be acceptable. Note: This exam was performed under Summary Number M1.R1.11.2103 during EOC-19. No additional RT examination was performed during EOC-21.M1 .R1.16.0055 I1NV614-1 NV 09/10111 CLR NV 09/10/11 CLR NV 09/10/11 CLR N N N UT-11-196 (Page 1)N N N UT-1 1-196 (Page 2)N N N UT-1l1-196 (Page 3)M1,R1.16.0056 1 RCPA-IN-2 NV 08/29/11 CLR N N N UT-11-172 Printed 1/12/2012 6:34:01 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 27 of 28 Summary No M1.R1.16.0057 Component ID 1NVlFW15-1 Insp System Date NV 10/03/11 Insp Status REC Inspection results for EOC-21 Insp Geo Limited Ref RFR Comment N N N RT-n/a Indications are tungsten, concavity, convexity and film artifact determined to be acceptable. M1.RI.16.0058 1NV50-4 NV 09114111 CLR NV 09/14/11 CLR NV 09/14111 CLR N N N UT-11-204 (Page 1)N N N UT-11-204 (Page 2)N N N UT-11-204 (Page 3)Mi.R1.16.0059 1WL1F3048 WL 10/11/11 REC N N N RT-n/a Indications are concavity, and film artifact determined to be acceptable. M1.R1.16.0060 1WL1F3049 WL 10/11/11 REC N N N RT-n/a Indications are tungsten, convexity, and concavity and film artifact determined to be acceptable. M1.R1.16.0061 1WL1F3069 WL 10/11/11 REC N N N RT-n/a Indications are concavity and film artifact determined to be acceptable. N N M1.Rl.16.0062 1WL1F3060 WL 10/09/11 REC N RT-n/a Indications are concavity, tungsten, film artifact and sludge determined to be acceptable. Printed 1112/2012 6:34:01 AM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 1 1/12/2012 6:31:02 AM Page 28 of 28 5.0 Owner's Report for Repair/ Replacement Activities As required by the applicable code, records of Class 1 and Class 2 Repair and Replacement work is included on NIS-2 forms in this section.No items were determined to have work performed outside this report period.The NIS-2 forms included in this section were completed for work performed during this report period.The individual work request documents and manufacturers' data reports are on file at McGuire Nuclear Station.5.1 Class 1 and 2 Preservice Examinations As required by the applicable code, Preservice Inspection (PSI) Examinations were performed on ISI Class 1 and 2 items during this report period. All Class 1 and 2 PSI examination data listed below is on file in the McGuire Nuclear Station QA Vault. Also included in this listing are the Class 3 PSI Examinations performed during this report period.See Attachment A listing for Repair and Replacements for McGuire 1 EOC-21.Outage 7/EOC 21 Refueling Outage Report McGuire Unit 1 Section 5 Page 1 of 1 Revision 0 January 12, 2012 Work Order# Task -Class Description of work I Attachment A Page 1 of 5 575415 1 IB Replaced snubber on hanger 1MCA-FW-148 575416 1 B Replaced snubber on hanger 1MCA-FW-149 588431 1 B Replaced snubber on hanger 1MCA-NI-12 588436 1 B Replaced snubber on hanger 1MCA-ND-256 5884376 1 B Replaced snubbers and there bolting material on hanger 1MCA-ND-255 588439 1 B Replaced snubbers and there bolting material on hanger 1MCA-ND-254 588444 1 B Replaced snubber on hanger 1MCA-ND-248 588445 1 B Replaced snubber on hanger 1MCA-ND-247 588463 1 B Replaced snubbers on hanger 1-MCA-FW-116 591155 1 B Replaced snubber on hanger 1MC-1683-NV-60 R3 591166 1 B Replaced snubber on hanger 1MCA-ND-179 _591167j 1 B Replaced snubber on hanger 1MCA-ND-2_89 -591168 1 B Replaced snubber and it's bolting material on hanger 1MCA-ND-296 591169 1 B !Replaced snubber on hanger IMCA-ND-315 591170 1 B BIReplaced snubber and it's bolting material on hanger 1MCA-NV-374 591170 -12 B Replaced snubber and it's bolting material on hanger 1MCA-NV-374j 591172 ! ..1 B- ..__ Replaced snubber and it's bolting material on hanger 1MCA-NV-5555 591173 1 j B Replaced snubber on hanger 1MCA-NV-5556 -591192 ! 1 B Replaced snubber and it's bolting material on hanger 1MCA-NS-91 591194 .1 B Replaced snubbers and there bolting material on hanger 1MCA-NS-98 591213 1 B Replaced snubber on hanger 1MCA-VQ-10 591339 1 B Replaced snubber on hanger 1MCA-ND-304 591340 1 B Replaced snubber and bolting material on hanger 1MCA-ND-250 591378 1 B Replaced snubber on hanger 1MCA-BB-410 591379 -1 B Replaced snubber on hanger 1MCA-BB-410 591386 1 B Replaced snubber and bolting material on hanger 1MCA-NI-253 591387 1 B Replaced snubber and bolting material on hanger 1MCA-NI-255 591390 1 B Replaced snubber and bolting material on hanger 1MCA-NS-88 591420 1 B Replaced snubber on hanger 1MCA-SM-188 591421 _ 1 B Replaced snubber on hanger 1MCA-SM-192 591423 1 B Replaced snubber on hanger 1MCA-SM-200 591484 1 B IReplaced snubber on hanger 1MC-1683-NV-01-R8A 591489 1 B Replaced snubber on hanger 1MCA-CF-152 I_591530 1 B Replaced snubbers and their bolting material on hanger IMCA-NS-85B 591544 1 B Replaced snubbers on hanger 1MCA-SM-69 I 591553 1 B Replaced snubber on hanger 1MCA-SM-19 591553 12 B Replaced snubber on hanger 1MCA-SM-19 _592066 F 31 B Replaced bolting material on clamp of hanger 1MCA-BB-402 592066 35 B Cut out and replaced valve 1BB413 592067 1 B Cut out and replaced valve 1BB533 592068 1 B Cut out and replaced valve 1BB6 1784845 4 B Replaced disc in valve 1NC57 1794709 1 B Replaced snubber on hanger 1MCR-VQ-514 1794711 1 1 B Replace snubber and it's bolting material on hanger 1MCR-VQ-506 1794735 1 B Replaced snubber and it's bolting material on hanger 1MCR-S-NI-100-04-Y 1794752 1 B Replaced snubber on hanger 1MCR-NV-1214 1794755 1 B Replaced snubber on hanger 1MCR-NV-1213 1794757 1_ B Replaced snubber and it's bolting material on hanger 1MCR-NV-1206 1794773 1 B Replaced snubber and it's bolting material on hanger 1MCR-NV-1201 1794774 1 B Replaced snubber on hanger 1MCR-NV-1043 1794895 1 B iReplaced snubber and it's bolting material on hanger 1MCR-NV-581 1794896 1 B Replaced snubber on hanger 1MCR-NV-545 1794903 1 -1 B Replaced snubber on hanger 1MCA-CA-411 1794904 1 B Replaced snubber and it's bolting material on hanger 1MCA-NV-306 1794905 1 1 B Replaced snubber and it's bolting material on hanger 1MCA-ND-272 1794907 1 -B Replaced snubber on hanger 1MC-1683-NV.04-R33 _1794908 1 B Replaced snubber on hanger 1MC-1683-NV.01-R16 17949i .1 .B Replaced snubber on hanger 1MCA-SM-104 F 1794913 1 .B IReplaced snubber on hanger 1MCA-ND-286I 1794915 -1 B Replaced snubber and it's bolting material on hanger 1MCA-ND-298 1794916 1 B Replaced snubber on hanger 1MCA-ND-290 I 1794917 1 B Replaced snubber on hanger 1MCA-ND-287 1794919 1 1 1 B Replaced snubber on hanger 1MCA-ND-275 1794920 j 1 B Replaced snubber on hanger 1MCA-ND-181 1794925 --1 B Replaced snubber and it's bolting material on hanger 1MCA-ND-270 17949351 1 B Replaced snubber on hanger 1MCA-SM-182 ___ 1794939 1 B Replaced snubber on hanger 1MCA-ND-273 1794941 1 B Replaced snubber on hanger 1MCA-CF-201 1794942 1 B Replaced snubber on hanger 1MCA-CF-201 1794967 1 ! B Replaced snubber and it's bolting material on hanger 1MCA-NV-498 1794990 B 1 bB Replaced snubber on hanger 1MCA-ND-271 1810883 1 A Seal weld cover on valve 1NI19 1810884 1 A Seal weld cover on valve 1NI17 1810887 1 A Seal weld cover on valve 1N1347 1857897 i 1 B Replaced disc in valve 1NS36 1864150 23 B Insalled piping per EC99750 1867772 3 B Replaced disc in valve 1NS64 1878522 20 B Replaced pipe clamp on hanger 1MCA-ND-333 due to operator change out on valve 1ND15 1892748 1 B Replaced plug assembly in valve iSV-1 AB 1 1897294 12 B Replaced bolting in flange at valve 1NVFE5330 1905977 2 B Replaced relief valve INV155 1911887 1 B Replaced snubber on hanger 1MCA-NV-435 1917396 13 B Replaced bolting material on excess letdown heat exchanger 1918405 1 B Replaced snubber on hanger 1MCA-ND-327 I 1919132 18 B Replaced hanger 1MCR-NS-767 with new support per EC101539 1919840 1 B Replaced disc in valve 1V1149 1919840 9 B Cut out and replaced valve 1V1149 per EC103658 1919897 1 B Replaced valve 1NV220 and it's bolting material 1920006 1 __BB Replaced rear pivot mount on hanger 1MCR-NI-702 1922133 1 B Replaced snubber on hanger 1MCR-BB-585 1922134 1 B Replaced snubber on hanger 1MCR-NV-548 1922135 1 B Replaced snubber on hanger 1MCR-NV-1006 1922137 1 *_ B Replaced snubber and it's bolting material on hanger 1MCR-S-NV-100-02-S 1922138 1 B Replaced snubber on hanger 1MCR-S-NF-100-01-H 1922139 1 B Replaced snubber on hanger 1MCR-NV-972 K 1922155 1 B Repla snubber on hanger IMCR-CF-404.... 1922156 1 B Replaced snubber on hanger 1MCR-CF-403 _1922157 1 B Replaced snubber on hanger 1MCR-CF-402 1922362 1 B Replaced snubber on hanger 1MCA-SM-11 1922368 1 B Replaced snubber and it's bolting material on hanger 1MCA-CA-432 1922384 1 B Replaced snubber and it's bolting material on hanger 1MCR-NV-943 1922396 1 B Replaced snubbers on hanger 1MCA-SM-103 1922401 j 1 B Replaced snubbers on hanger 1MCA-SM-75 1922405 s 1 B Replaced snubber on hanger 1MCR-NV-966 1922412 __1 B Replaced snubber on hanger IMCA-CF-157 1922414 1 B Replaced snubbers on hanger 1MCA-SM-108 1922418 1 B Replaced snubber on hanger 1MCR-BB-663 1922422 F 1 B Replaced snubber on hanger 1MCR-NV-1048 1922423 1 A Replaced snubber on hanger 1MCR-NC-574 1922427 1 B Replaced snubber on hanger 1MC-FW-121 1922428 1 B Replaced snubbers on hanger 1MCA-ND-281 1922433 1 B Replaced snubber on hanger 1MCA-ND-297 1922445 1 B Replaced snubber on hanger 1MCA-FW-118 1922446 1 B Replaced snubber on hanger 1MCA-FW-120 1922447 1 B Replaced snubber on hanger 1MCA-FW-126 1922449 -1 B Replaced snubbers on hanger 1MCA-FW-160 1922451 1 B Replaced snubber and it's bolting material on hanger 1MCA-NV-471 1922452 1 B Replaced snubber and it's bolting material on hanger 1MCA-NV-5522 1922553 1 B Replaced snubber and it's bolting material on hanger 1MCA-NV-396 1922571 1 B Replaced snubber on hanger 1MCA-SM-185 1922572 1 B Replaced snubber on hanger 1MCA-SM-209 1930950 8 B Replaced bonnet on valve 1NV498 per EC102955 1930951 14 B Modified hanger 1MCR-BB-501 per EC100651 1930951 18 B Modified hanger 1MCR-BB-507 per EC100651 1948066 9 B Replaced bolting in flange 1NVFE5300 I 1952310 49 B Replaced snubber on hanger 1MCA-NV-5609 1952541 7 B Reworked hanger 1MCR-NV-11901 1956492 3 B Replaced bolting material on penetration M461 1956861 56 B Replaced snubber on hanger 1MCA-CF-173 1957052 2 -B Replaced control valve in Lisege Snubber (SG-D)1957177 8 .A Replaced valve INCI 2002923 1- A Seal welded body to bonnet on valve 1NV810 2002923 6 L A Reworked hanger 1MCR-NV-848 2004055 1 A Base metal repair on piping at hanger 1MCR-NV-1059 2004926 21 B Replaced WL piping per EC106925 2005281 15 B Installed hanger 1MCR-WL-785 per EC106925 2005296 1 A Replaced snubber on hanger 1MCR-NC-769
- i. Owner .. Duke Elnýergy-C arol i n _as LI 526 South Church Street.Address 2. Plant McGui-re Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl LC -----------
~--- -... .... ..... Date 8/24/2010 ChNarloteC, 2820291- Sheet I of'2_Station Name 12700 Hagqs Fer_ Road, Huntersville,&NCQ28078 Address 3. Work Performed by k LL-.Name 526 South Church Street. Charlotteig N 8201- 1006 _Address Unit t 575415-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME 1I](b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XL Code Case(s) N/A 6. Identification of Components 19 71: Edition, Summer and Winter Addenda, N/A Code Case[ition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-FW-148 Duke Energy .19293 N/A N/A N/A Removed No IMCA-FW-148
- Duke Energy 37211 N/A N/A N/A Installed No 7. Description of Work Rer Additional Description rel 8. Tests Conducted:
Hydrostatic F" Description (Optional): flacedCgmponent/Part/Appurtenance placed snubber on hanger I MCA-FW- 148 Pneumatic I" Nominal Operation Pressure FT Exempt F Other I-Pressure* PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 24 in. (nominal) System Class: ASMEClass2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1570-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-FW- 148 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRF-FWA-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist " Date August 24 -20 10 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period..z../"--O...(...to 43"0/O- ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspectio JF Swan Commissions NC 1524, N-I National Board, State, Province, and Endorsements Date 20-1D FORM NIS-2 OWNER'S REPORT FC As Required by the Provisio 1. Owner .Duke Ener C jas LLC .526 South Church Street, NCharlCtte,_N_28_201 _ -....Address 2. Plant McGuire _Nuclear Station Name 12700-Hagers_ Fey oa Hunters.ille. NC.28078 Address 3. Work Performed by Duke EnergyC-arolinas, LLC .Name 526 South Church Street _Charlotte NC 28201-1006 Address)R REPAIR/REPLACEMENT ACTIVITY ns of the ASME Code Section XI Date 8/24/2010 Sheet I of 2 Unit .1 575416-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1.998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 19 71 Edition, Summer and Winter Addenda, N/A Code Case lition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-FW-149 Duke Energy 19288 N/A N/A N/A Removed No IMCA-FW-149 Duke Energy 21739 N/A N/A N/A Installed No 7. Description of Work Re1 Additional Description re 8. Tests Conducted: Hydrostatic I Description (Optional): ý atcedpCromponen-tPa .rt/Appurtenance placed snubber on hanger IMCA-FW- 149 Pneumatic FT Nominal Operation Pressure rI Exempt F Other 17 Pressure PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 24 in. (nominal) System Class: ASME Class_2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1570-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-FW- 149 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRF-FWA-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Date August 24 -2010 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-2'-.-" /o, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither t0 Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspectio JF Swan / "'.- .--a -Commissions NC1524, N-I Inspector's SSignatur,ý r/National Board, State, Province, and Endorsements 20 *1
- 1. Owner 2. Plant fluke Fneroy L[FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date .6/22/2011 Charlotte, NC, 28201 Sheet 1 of 12 526 South Church Street.A ....Aduress McGuire Nuclear Station Name 12700 Ha1aers Ferry Road. Huntersville.
NC 28078 Unit Iý588431-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: iN/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System :NI -Safety Injection 5. (a) Applicable Construction Code ASME III 1971F Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) :N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NI- 12 Duke Energy .21291 .N/A N/A N/A Removed No.IMCA-NI-12 E.Duke Energy 38394 N/A :N/A N/A I!s.... ... .t... ....~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~~~~~. .......l 11 i!~ii12 2 11!1 .. ... ..... ........ .I ..... ... .............. ." .. ... .... .. .. ...........: J : .... .. .. .. ..... " ..... .h... ..... ...... .....7. Description of Work Replaced Component Additional Description Replaced snubber or 8. Tests Conducted: Hydrostatic F Pneumatic Description (Optional): Part/Appurtenance ihanger 1 MCA-NI- 12 a hanger 1MCA-NI- 12 Nominal Operation Pressure r .Exempt F.. Other r Pressure ______PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2. of .2 Flow Diagram No(s).:.MCFD- 1562-03.00 Support/Restraint Sketch/Drawing No(s).: IMCA-NI-12 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NIA-00I Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FLGrass, Quality Assurance Technical Specialist Date :June 22 , 201L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolhna .."and employed by !Hartford Steam Boiler Inspection and Insurance Company of iConnecticut have inspected the components described in this Owner's Report during the period.-.6..z".2- -/' '.f/L to _ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section X1.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspe or nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan X, 0- j, j.Commissions NB 11473-NC1524, N-I-Inspector's Signature National Board, State, Province, and Endorsements D. ....
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI SDuke Energy Date 8/30/2010 526 South Church Stree. Charlotte,_C_
28201 ..Sheet 1 of.2 Address McGuire Nuclear Station Unit I Name 12U70_Hag-e!rs Ferry -Huqntersvilie, NC 28078 Address 3. Work Performed by DukeEnergyCaroinas LLC .Name 526 South Church Street, Charlotte, NC 2820 1-1006 Address 588436-01 Work Order# (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 199.8 Edition with thbe 19.99..a-nd 2000__Add-end-a_(c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-256 Duke Energy 15851 N/A !N/A :N/A Removed No IMCA-ND-256 Duke Energy 36705 N/A N/A N/A Installed No 7. Description of Work Re.Additional Description re 8. Tests Conducted: Hydrostatic -Description (Optional): placed Component/Part/Ap prtenaince placed snubber on hanger I MCA-ND-256. Pneumatic r-Nominal Operation Pressure FT Exempt F Other F Pressure : PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 12 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1563-01.00 Support/Restraint Sketch/Drawing No(s).: MCA-ND-256 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-FWA-004 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date August 30 ,20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period_~"~/~r~lZJQ to / /. ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own I's Report. Furthermore, neither t Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro ?/or connected with this inspectia JF Swan CoO,_7i't-,Z.. .1 k , Commissions NC1524, N-1.... w ........ .Inspector's signature-' ot( iZ I National Board, State, Province, and Endorsements 16r-ý20.L-Cý/
- 1. Owner 2. Plant 1T~nk~ Pner~'v Carn1~i~a~
Ti FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/19/201 1 Charlotte, NC. 28201 Sheet :I of 2 Duke P-nerpv Carolinas L 526 South Church Street. (A~id~McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville. NC 28078 Address Duke Energy Carolinas, LLC Name 526 South Church Street. Charlotte. NC 28201-1006 Unit I 588437-01 3. Work Performed by Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A KrT A Address Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME Hi 1971. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)'IMCA-ND-255 Duke Energy 18012 N/A N/A N/A Removed No IMCA-ND-255 Duke Energy .37823 NNA N/A N/A Installed No 1lMCA-ND-255 'Duke Energy .20854 N/A N/A N/A Removed No IMCA-ND-255 Duke Energy 37830 N/A .. N/A N/A Installed No 7. Description of Work Ret Additional Description R 8. Tests Conducted: Hydrostatic T Description (Optional): elaced Coms onent/Part/Applurtenance eplaced snubbers and there bolting material on hanger I MCA-ND-255 Pneumatic rT Nominal Operation Pressure F Exempt F Other F Pressure' PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 12 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD3-1563-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-ND-255 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist kZ4v4 ft -Date September 19 ,2011 Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut__ have inspected the components described in this Owner's Report during the period../L.z.L. .,to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection. iJF Swan " Commissions
- NBI 1473-NC 1524, N-I Inspector's Signature/ "National Board, State, Province, and Endorsements Dald ' al()
- 1. Owrer Duke Energy Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions oethe ASME Code Section XI C Date Charlotte. NC. 28201 Sheet L of 5~niith Chtwr~h Street I 526 South Q11-h Street-AAA-2. Plant McGuire Nuclear Station Name 12700 Haters Ferry Road, Huntersville, NC 28078 Unit .:588439-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacern'ent Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 06 :XI 526 South Church Street, Charlotte, NC 2820 1-10(Address Expiration Date: 4. Identification of System D-ReiulHaRmol
- 5. (a) Applicable Construction Code ASME 111 191.2 Edition, ;Summer and Winter -Addenda, ,N/A .Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) .N/A 6. Identification of Comn onents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built .Installed (Yes or No)I MCA ND254 .Duke Energy .14937 N/A NIA .N/A Removed 1MCA-ND-254 Duke Energy 1 ..7827 !.N/A 'N/A .iN/ , Installed No... ...... .. ..... ........ .. .. ... ..MCA-ND-254.
.Duke Energy 149437 NIA VN/A NA I Removed IMCA-ND-254 -.-.. .3761 N/AN/AN/A Installed.. ..... .. ...... ........ .. .. ........... ......... -, ., ... .... ....... ... .7. Description of Work Replaced Component/Part/Apourtenance Additional Description
- Replaced snubbers and there bolting material on hanger I MCA-ND-254
- 8. Tests Conducted:
Hydrostatic r_ Pneumatic r7 Nominal Operation Pressure I1' Exempt .F Other F Pressure .PSI Test Temp.. OF Description (Optional): FORM NIS-2 OWNER'S REPORT FOR REPAIRfEPLACEMENT ACIWITY As Required by the Provisions orthe Code Section X1* ~ ~ ~ V ,,""" --t 9. Remarks (Should Include the Following Information, as Applicable): Sheet of 1._j Component Line Size: '12 ...(nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: fN/A "". .... --""......... Flow Diagram No(s).: 1MCFD-1563-01.00 Support/Restraint Sketch/Drawing No(s).: iMCAND254 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: S... .. ... ..... ... ......... .. ..--. ....*.. ... ............. .. .----............ ........... ..__.. .... ... _-Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF CODPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. iN1A Expiration Date 'N/A I S igndFL Grass, Quality Assurance Technical Specialist jDate September 19 20611 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE.INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Insptatct..rs d the S or Provc f.North Carolina............... and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period"to -and state that tO the best of my knowledge and belief, the Owner has perforned exam-iinations and taken corrective measures describedin this Owner's Report in accor ance with the requirements of the ASME Code, Section X1.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither ae Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from fr connected with this inspecti 1F Swan ..... ..,commissions !NBI1473-NC1524, N-Il/ nsl~ctor's Signalture T Datr /20LL National Board, State, Province, and Endorsemients
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI... DukeEnergy Carol inas, LLC .... .. .. ...... .... .Date :8/24/2010 526_South Church Street Charloe..
Sheet ! of 2 Address McGuire _Nuclear Station Unit .I Name 127O0 HagersFerryoadH ptersville, NC 28Q78 Address 3. Work Performed by Duke Energy Car9l.inas,._LLC Name 588444-01 588444-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 4.5.6.526 South Church Street. Charlotte. NC 28201-1006 ......-N/A Address Expiration Date: Identification of System ND -Residual Heat Removal (a) Applicable Construction Code ASME 11l 19 71 " Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A Identification Af Cnmn Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)SI MCA-ND-248 Duke Energy 14872 N/A ;N/A N/A Removed No 1 MCA-ND-248 Duke Energy 20754 N/A N/A N/A Installed No 7. Description of Work Additional Description ret 8. Tests Conducted: Hydrostatic F Description (Optional): pl-ace(d Co-rnpo-en-tP-aq(Ap-pu-e-nanceg )1laced snubber on hanger I MCA-ND-248 Pneumatic F-Nominal Operation Pressure IF Exempt P Other r" Pressure PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 14 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASMEICass 2 Flow Diagram No(s).: MCFD- 156 1-0 1.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-248 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-FWA-006 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 24 ,20210 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut
- have inspected the components described in this Owner's Report during the period 0-1-S 1 .to- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Insp ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.
JF Swan F -. -Commissions NC 1524, N-I lnspector's Signature /National Board, State, Province, and Endorsements Date~j > 20:_!O
- 1. Owner 2. Plant Dluke Ener~v Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 6/22/201i. Charlotte NC, 28201 Sheet I off 2 Duke Energv Carolinas. L 526 South Church Street.Adoress McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit 1 W588445-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)3. Work Performed by Type Code Symbol Stamp: :N/A Authorization No.: N/A"'MT A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: INIl 4. Identification of System !ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 1971i Edition, Summer and Winter Addenda, iN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section X1 Code Case(s) :N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name ofManufacturer Serial No. Board No. Identification Built Installed (Yes or No)1IMCA-ND-247 Duke Energy 21281 NAN/A IN/A Removed No 1MCA-ND-247
- Duke Energy 137051 N/A N/A N/A Installed No... .. ; 1 .......... .... .... ... .... ... ..... .............. .... .... .... ... ..... ....... ...... ......... ..~ ~.. ...... .. .... ... .. ... ...l ...7. Description of Work Replaced Component Additional Description Replaced snubber ot 8. Tests Conducted:
Hydrostatic F- Pneumatic [-Description (Optional): /Part/A urenc i hanger I MCA-ND-247 Nominal Operation Pressure.F Exempt P Other F7 Pressure _ _PSI Test Temp.. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 14 -in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-247 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-FWA-006 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date June 22 ,2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina .and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut have inspected the components described in this Owner's Report during the period k -L/2.to ", and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his em poyer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspec nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection..JF Swan 6 ... CommissionsNB I 1473-NCI524, N-I ,, Inspector's Signature .'ýv National Board, State, Province, and Endorsements I
- 1. Owner 2. Plant Duke Enery Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMTY As Required by the Provisions of the ASME Code Section XI LC Date .7/19/2011
..Charlotte, NC, 28201 Sheet I of 2 526 ~A1,th Ch~irch ~treet~ I 526 Sou Church Street A A,1 McGuire Nuclear Station Name 12700 Haier. Ferry Road_ Huntersville. NC 28078 Unit 1 588463-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte, NC 2820 1-1006 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: :N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME III 1927 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-FW- 116 Duke Energy '20443 N/A Removed IMCA-FW-116
- Duke Energy 38080 /N/A NA Installed No 1MCA-FW- 116 'Duke Energy 20445 IN/A 'N/A N/A Removed No IMCA-FW-1 16 Duke Energy 38083 .N/A N/A N/A Installed No 7. Description of Work Ret Additional Description Re 8. Tests Conducted
Hydrostatic F Description (Optional):)laced Component/Part/Appurtenance eplaced snubbers on hanger I MCA- FW-I 16 Pneumatic F Nominal Operation Pressure F Exempt F Other F Pressure PSI Test Temp. ___°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2_ .of ý2 Component Line Size: 8 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1 554-03.01 Support/Restraint Sketch/Drawing No(s).: IMCA-FW-l116 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date :N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 19 ,20 1I Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:North Carolina .and employed by Hartford Steam Boiler Inspection and Insurance Company ofýConnecticut have inspected the components described in this Owner's Report durinar the period unttd 7// to. 7 a / -/Z ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Ins ptor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from oconnected with this inspection. IF Swan 10 Z-11473-NC1524, N-I uiII12 Inspector's Signature.7 C " 21 National Board, State, Province, and Endorsements 20J~4 l = J FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1. Owner Duke EneryCarolinas_ .Date 10/19/2010 526 SouthChurch Street. Charlotte..NC,.2820_ .... .. .. Sheet 1 of 2 Address 2. Plant McGuire Nuclear Station Unit I Name 127.0Q H gers Fe rrv._oad, utersvil,.NC 28078 Address 3. Work Performed by Duke Energy Carol'nas, Lf C Name 526 South Church Street, CharlotteNC 28201-1006 Address'591 155-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME I1 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity ..t998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMC-1683-NV-60R3 Duke Energy 21809 N/A N/A N/A Removed No IMC-1683-NV-60R3 Duke Energy 36699 N/A N/A N/A Installed No 7. Description of Work Rqp!lace omtponent/Part/Appurtenance Additional Description re 8. Tests Conducted: Hydrostatic F" Description (Optional): placed snubber on hanger IMC- 1683-NV-60R3 Pneumatic r'Nominal Operation Pressure F Exempt F- Other I-Pressure __ PSI Test Temp. _ °OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 11/2 in. (nominal) System Class: ASME.Class_2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MVFD-1554-02.00 Support/Restraint Sketch/Drawing No(s).: IMC- 1683-NV-60R3 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 .Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 19 ,20 10..Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 7-10 to / t D" 2 ." /.. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Jspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fron/or connected with this inspection. JF Swan V .-Commissions NC1524, N-I Inspector's Signatur Date(/ 0 -a,0 National Board, State, Province, and Endorsements 20oP
- 1. Owner 2. Plant Duike- Energy -Caroli.nas, LL 526 SouthChurch SCtreet,c Address McGuire Nuclear FORM N1S-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl-C. .. ... .... ... .. Date 3/2/2011 h r-NC 282-. ------ .....Sheet 1 of'2 Statioon.
Unit .1 Name rrv Road,.Huntersvi_!eJ.NC 28078 '591 166-01 12700 Hap-ers; et Address 3. Work Performed by Duke EnergyCarolinas .. .Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authnrizatinn Nno N/A 526 South Church Street. Charlotte. NC 28201-1006 N/A Address Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME ill 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1.998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-179 Duke Energy 14886 N/A N/A N/A Removed No IMCA-ND-179 Duke Energy 37598 N/A N/A N/A Installed NQ 7. Description of Work R epl;Additional Description re 8. Tests Conducted: Hydrostatic FT Description (Optional): --aci~d Com..po nen t/Part/Appurtenance placed snubber on hanger I MCA-ND-179 Pneumatic r" Nominal Operation Pressure FT Exempt F Other r. Pressure __PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 3*in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 156 1-01.OO Support/Restraint Sketch/Drawing No(s).: I MCA-ND- 179 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date March 2 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina , , ,1 4,, Hartford Steam Boiler Inspection and Insurance Company 4r Connecticut ave ý eted uy th cYdn d t pi have inspected the components described in this Owner's Report during the period L/ O 3 -/t and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's keport. Furthermore, neither the Insp ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from orbnnected with this inspection. JF Swan Commissions NC1524, N-I Inspector's Signature Date &0,~'p National Board, State, Province, and Endorsements ,20I
- 1. Owner 2. Plant Duke Enrgy.C)arolin as,_L 526 South Church Street,_Address Mc.Gui-re Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI S...................................................
Date 8/10/2010 Charlotte.
NC. 28201.Sheet 1 of 2....Station Unit I Name 12700 HaersEerry__Qad,- Huntersyvi~le, NC 28078 *591167-01 Address Work Order 9 (or Repair/Replacement Organization P.O. No., Job No., etc.)3. Work Performed by DukeEnergy CarolinasLLC Type Code Symbol Stamp: N/A Name Authorization No.: N/A 526 South Church Street,. Charlotte, NC 28201-106 Address Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-289 Duke Energy :00165 N/A N/A N/A Removed No:20502 N/A N/A Installed No IMCA-ND-289 Duke Energy 252N/A N/A-----7. Description of Work R~e.Additional Description re 8. Tests Conducted: Hydrostatic F Description (Optional): Al aced Component/ParAppurtenance placed snubber on hanger I MCA-ND-289 Pneumatic r" Nominal Operation Pressure F Exempt F7 Other F Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 8 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1561-0 1.00 Support/Restraint Sketch/Drawing No(s).: I MCA-ND-289 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 10 ,20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period Lm -S. / 0 to t / .and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. F Swan --.*Commissions NC1524, N-I SInspector's Signature National Board, State, Province, and Endorsements D ýe 0- , FORM NIS-2 OWNER'S REPORT FOR REPA[IRREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1. Owner Duke Energy CarolinasLLC Date 8/19/2010 526 South Church Street, Charlotte. NC, 28201 Sheet 1 of 2 Address 2. Plant McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road HuntersvilleiNC 28078 .591168-01 Address 3. Work Performed by Duke Energy Carolinas, LLC......... Name 526 South Church Street CharoQtte,_NC 28201-1006 Address 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Comp)onents Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 1971 Edition, .Summer and Winter[ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-296 Duke Energy 14813 N/A .N/A N/A Removed No IMCA-ND-296 .Duke Energy 20533 N/A N'N/A N/A Installed No... .... ... .. ...~~ ~~ 7 7 .... ..........r. ... ....... ..7. Description of Work Replaced Component Additional Description replaced snubber an 8. Tests Conducted: Hydrostatic F Pneumatic IF Description (Optional): _Part/Appurtenance Ibolting material on hanger I MCA-ND-296 Nominal Operation Pressure F Exempt F .Other F Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).:.MCFD-156I-0l .00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-296 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-002 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist \ Date August, 19 _ 20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period* _ o F./'-? ZC/!, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from oconnected with this inspection..JF Swan Commissions NC 1524, N-I S Inspector's Signature National Board, State, Province, and Endorsements Date ,20ý 5 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions ofthe ASME Code Section X1 1. Owner Duke Energy Carolinas LLC Date 8/24/2010 526 South Church Street Charlotte, NC, 28201 Sheet I of 2 Address 2. Plant McGiuireNLuclear Station Unit 1 Name 12700 _Hagas Fey RoadaHuntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church Street Charlotte NC 28201-1006 Address 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 998. Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components .591169-01 Work Order # (or Repair(Replacement Organization P.O. No., lob No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 19 71 Edition, Summer and Winter ition with the 1999 and 2000_Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-3.15 Duke Energy 20555 N/A N/A "N/A Removed No IMCA-ND-315 Duke Energy .21063 N/A N/A N/A Installed No* ........... ...7. Description of Work Rep Additional Description ret 8. Tests Conducted: Hydrostatic F Description (Optional): laced Component/Part/Appurtenance placed snubber on hanger I MCA-ND-3 15 Pneumatic F" Nominal Operation Pressure F'Exempt F' Other F .Pressure__PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME__Class_2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-315 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVV-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist __'-e..- Date August 24 ,20 11 Owner or Owner's Designee, Title ---CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period?.- Q to " i, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own 's Report. Furthermore, neither/ Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspectio JF Swan 2 .Commissions .NC1524, N-I/ Inspector's OFNational Board, State, Province, and Endorsements o / 31- -o,5 6 I. Owner 2. Plant Duke Energy.Carolinas,LL 526 South Church Street, Address Mc.Guire.Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI C .. Date 5/9/2011 Charlotte, NC, 28201.. .... ...... Sheet 1 of 2 Station Name 12700 Hagers Ferry Road, Huntersvilie, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Unit 1.591170-01 Work Order # (or Repair/Replacement Organization P.O. No., lob No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 5.2.6. South Church Street, Charlotte, NC 28201-1006N Address Expiration Date: N/A 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME II1 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section Xl used for Repair/Replacement Activity 1998 Edition with the-1999 a-nd _2000 Add-enda-.-(c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-NV-374 Duke Energy 18173 N/A N/A N/A Removed No 1MCA-NV-374 Duke Energy 37821 N/A .N/A N/A Installed No 1 4 ..4 .+ .+ 4 4 I 4 4 + + 4 4 7. Description of Work Rei Additional Description Rc 8. Tests Conducted: Hydrostatic F Description (Optional): Iace~d C~omp)o~n~en~t/Part/Appwiqenanc~e placed snubber on hanger IMCA-NV-374 and it's bolting material.Pneumatic r-Nominal Operation Pressure F Exempt 17 Other FI Pressure PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASME_Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: :MCFD-1554-02.01 Support/Restraint Sketch/Drawing No(s).: I MCA-NV-374 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVU-001 Sheet 2:of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date May 9 2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-~z2 //.-to -/Z/-/ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing th* certificate neither the Inspector nor his employpý makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own ' Report. Furthermore, neither the Inspector is employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro connected with this inspection. d7 A x. cefit_.,missions NBI 1473-NC 1524, N-i I-spector's Signature /National Board, State, Province, and Endorsements 'Dat/ / 7"-Z/Z- 1Z ,20J/
- 1. Owner 2. Plant D-uke Energy Carolinas, .LL 5_2_6. South _Church Street,.Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 C.. ... --- Date 5/9/2011 Charlotte, NC, 28.201 ..........
Sheet 1 .of 2 Station Unit I Name!.2_79QJHa~gerr aerrsyvRgylle,..NC 28078 Address 3. Work Performed by DuPke.Energy Caroinas, LLC Name 526 South Church Street,. CharlotteNC 28201-1006 ..Address 4. Identification of System NV -Chemical and Volume Control.591170-12 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: N/A 5. (a) Applicable Construction Code ASME llI 19 71 Edition, Summer and Winter Addenda, :N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity .1998_Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)*IMCA-NV-374 Duke Energy 18169 N/A N/A N/A Removed No.IMCA-NV-374 Duke Energy 37829 N/A :N/A :N/A Installed No 7. Description of Work Additional Description Repiaced Qmp.one.tt/Part/Ap ._urtenance Replaced snubber on hanger IMCA-NV-374 and it's bolting material.8. Tests Conducted: Hydrostatic F Description (Optional): Pneumatic F Nominal Operation Pressure r" Exempt F Other F Pressure PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASMEClass_2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD- 1554-02.01 Support/Restraint Sketch/Drawing No(s).: 1MCA-NV-374 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVU-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Date May9 .2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION [, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period s to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the In ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection. JF Swan ,Commissions NB] 1473-NC1524, N-i Inspector's Signatur"e National Board, State, Province, and Endorsements oatr,/ 20--//
- 1. Owner 2. Plant Duke Energy. Carol inas, LI 526 South Church Street.Address McGuire.Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl C ... ..... Date 5/9/2011 Charlotte, NC,.28201
.............. Sheet I of 2-Station Unit 1 Name 12700 Hagers.Ferry Road, Hluntersville,.NC 28078 Address 3. Work Performed by Duke EnergyCarolinas,.LLC Name 526 South Church Street, Charlotte, NC 28201-1006 ....Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section Xl Code Case(s).N/A
- 6. Identification of Components 591172-01
.Work Order 4 (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 19 71 Edition, Summer and Winter Addenda, N/A Code Case ition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NV-5555 Duke Energy 22021 N/A N/A N/A Removed No IMCA-NV-5555 -Duke Energy 38085 N/A .N/A N/A Installed No 7. Description of Work Rep Additional Description Re 8. Tests Conducted: Hydrostatic F" Description (Optional): laced Com ponent/Part/Appurtenance placed snubber on hanger I MCA-NV-5555 and it's bolting material.Pneumatic F Nominal Operation Pressure r Exempt F Other f7 Pressure PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal)Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 System Class: ASME Clas-s-2 Flow Diagram No(s).: MCFD- 1554-02.01 Support/Restraint Sketch/Drawing No(s).: I MCA-NV-5555 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVT-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. .N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -'- 4'- Date May 9 ,2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period.5"- 'Z to " and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his mployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' eport. Furthermore, neither the Ins tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from -onnected with this inspection. JF Swan -_.-C.m-missions NBI1473-NC1524, N-I Inspector's Signature 1,,,;5 -National Board, State, Province, and Endorsements Date Lis , 20..
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI Duke Energy CarglinasLLC
................ .Date 5/9/2011 526 South Church Street Cha eotte, NC, 2 - -. .....Sheet .." f 2 Address McGuire Nuclear Station Unit I Name.12C 0LgagesFerryRoad,. Hurntrsvi lie. NC 28078 Address 3. Work Performed by Duke EnergyCarqJinasLLC Name 591173-01 Work Order A (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street. ChaNrotte. NC 28201-1006 N/A Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME 111 19 71. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity _1998.Ecdition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, IASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NV-5556 Duke Energy 21425 N/A :N/A N/A Removed No:IMCA-NV-5556 Duke Energy 38086 N/A/A N/A Installed No 7. Description of Work Re~placed1C-omponlent/P~a~r'IAppt)ur~tenancee Additional Description Re 8. Tests Conducted: Hydrostatic F Description (Optional):.placed snubber on hanger I MCA-NV-5556. Pneumatic F" Nominal Operation Pressure F'Exempt F Other F" Pressure PSI Test Temp. _ IF FORM N iS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet.2 of 2 Component Line Size: 4 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-02.O1 Support/Restraint Sketch/Drawing No(s).: I MCA-NV-5556 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on N IS-2 Form: MCSRD-NVT-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist J.,-"' Date May 9 ,2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period to -:57 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report tn accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Insp ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from oconnected with this inspection.
- .F Swan -o " Commissinnt NBI 1473-NC1524, N-I I nspector's Date( f/Z Signature
-kf National Board, State, Province, and Endorsements 20/& FORM NIS-2 OWNER'S REPORT FOR As Required by the Provisions o 1. Owner .Qke..Energy Carolinas. LLC ......526 South Church.hStreet Charlotte,.NC.,2820-l Address 2. Plant McG-uir.e. Nu-cl.e ar_.Stati on Name 12700 H~ars EFrry_ qad, Hunters NC 28078 Address 3. Work Performed by Duke ErnegyroIin, .......Name 526 South Church Street._Charlotte, NC 28201 -1006 Address 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction Code ASME Il (b) Applicable Edition of Section Xl used for Repair/Replacement Activity 1.998.Ed (c) Applicable Section X1 Code Case(s) N/A 6. Identification ofComponents REPAIR/REPLACEMENT ACTIVITY'f the ASME Code Section XI Date 8/17/2010 Sheet I of 2 Unit I.591192-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 1971 Edition, Summer and Winter.ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCA-NS-91 Duke Energy 18064 N/A N/A N/A Removed No I MCA-NS-91 Duke Energy 37599 N/A N/A N/A .Installed No 7. Description of Work Re Additional Description R_8. Tests Conducted: Hydrostatic F-Description (Optional): placed Component/Part/Appurtenance eplaced snubber and it's bolting material on hanger I MCA-NS-91 Pneumatic I-Nominal Operation Pressure FT Exempt F Other FT Pressure_
- PSI Test Temp.
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 10 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-1563-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NS-91 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NSB-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August, 17 ,20 10O Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period L- / I / r to F[- /1ý -/ o ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from with this inspection. JF Swan I r -'----- Commissions NC1524, N-I K // Inspector's Signature '." /Date [9 National Board, State, Province, and Endorsements 202 I. Owner .. Duke Enrgy £Carolinas,.LL 526 South Church Streetj Address 2. Plant McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1_ ... ...... .. .... ...... Date 9/2/2010 h~arlotte,_C,2820. ..... .... Sheet 1 of 2 Station Unit .1 Name 12700 Hagprýi Huntersville, NC_28_078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church Street_ _haott NC 28201-1006 Address 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 591194-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: NS -N/A 19 71 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, *N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NS-98 Duke Energy 18120 N/A .N/A N/A Removed No IMCA-NS-98 Duke Energy 38056 N/A .N/A N/A installed No IMCA-NS-98 iDuke Energy 18880 N/A N/A N/A Removed NQ 1MCA-NS-98 .Duke Energy 38053 N/A N/A N/A Installed No 7. Description of Work Re-Additional Description Rt 8. Tests Conducted: Hydrostatic F" Description (Optional): pced Component/Part/Appurtenance eplaced snubbers and their bolting material of hanger 1 MCA-NS-98 Pneumatic r" Nominal Operation Pressure F-Exempt F Other Fr Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 10 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1563-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NS-98 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NSB-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ..Date September 2 20210.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut ? have inspected the components described in this Owner's Report during the period 9l I to " , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own 's Report. Furthermore, neither e Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising frorr r connected with this inspectic .JF Swan
- NC 1524, N-I National Board, State, Province, and Endorsements Date6/ 20_ A0
- 1. Owner 2. Plant Duke EnergyCarolinaL 526_ South Church Street.Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC_ .... -Date 9/16/2010 CharotteN,2_
.........Sheet I of 2 Station Unit I Name 3. Work Performed by 12_70 ageferr od Hun~tersfyille, NC .28078 Address Duke Energy Carolinas, LLC Name 526 South Church Street. Charlotte, NC 28201-1006 Address Work Order 4 (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A
- 4. Identification of System VQ-5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity .1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, AS ME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-VQ-10 Duke Energy, 15119 N/A .....N./A. N/A Removed No 1 MCA-VQ-10 Duke Energy 3.6870. N/A N/A N/A Installed No.1. n L .1.7. Description of Work Re Additional Description Rt 8. Tests Conducted:
Hydrostatic F" Description (Optional):-lacedComponent/Part/Appjii1enance eplaced snubber on hanger I MCA-VQ- 10.Pneumatic F Nominal Operation Pressure 17 Exempt F Other F Pressure __ PSI Test Temp. _ F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 6 in. (nominal)System Class: ASMEClass_2 Weld Isometric Drawing NOWs.: N/A Flow Diagram No(s).:.MCFD- 1585-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-VQ- 10 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-VQA-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X1.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A SignedFL G ass, Quality Assurance Technical Specialist -Date September 16 ,20 10 Signed FL Gs Q A ne T ehnica S iali D Owner or Owner's Designee. Title -CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period ,- to -/ O, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing t ls certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own r s Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection. JF Swa_. .. -Commissions NC1524, N-I Inspcto's Sgnau,;National Board, State, Province, and Endorsements e________
- 1. Owner Duke I 526 S 2. Plant 3. Work Performed by Energv Carolina-.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date .6/22/201.1 Charlotte NC, 28201 Sheet 1 of!2 o outh Church Street.wuw-rsB McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energ Carolinas LLC Name 526 South Church Street, Charlotte. NC 28201-1006 ___Address Unit I 591339-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 19,71 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A ý Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)'MCA-ND-304 Duke Energy 14965 NA N/A :N/A Removed No 1MCA-ND-304 Duke Energy :38426 N/A N/A Installed No.... ... .~ ~ ~~~~.... ... .. ............... .... ......., , .. ..... ........... ....... .... ,....... .. .. .... .... .... 1 ........ ... ...... ..,. ... .... .7. Description of Work Replaced Component/Part/Appurtenance Additional Description .Re 8. Tests Conducted: Hydrostatic F Description (Optional): placed snubber on hanger I MCA-ND-304 Pneumatic F'Nominal Operation Pressure F Exempt F Other F'Pressure; ____PSI Test Temp. O_°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: .8 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2! of 2 Flow Diagram No(s).: MCFD- 1561-0 1.00 SupportfRestraint Sketch/Drawing No(s).: 1 MCA-ND-304 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: :MCSRD-NDA-005 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date .June 22 :, 20.11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of'North Carolina ,j , 'Hartford Steam Boiler Inspection and Insurance Companyýf'Connecticut have inspected the components described in this Owner's Report during the period"to 2-3 n0 .and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne 's Report. Furthermore, neither tJy Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro/Tr connected with this inspectio JFF Sw P-, .Commissions NB i 1473-NC1524, N-1 Inspector's Signatu're te- 20.7;National Board, State, Province, and Endorsements 20A
- 1. Owner 2. Plant_DDuke.En.ergy Caro-linas.,_L 526 South Church Street.Address McGOuire.
Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR7REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI_ .Date .1/11/2011 Charlotte,. NC, 28201 ..Sheet 1 of.2--Station- Unit I Name 2700 HagersFeyRoaH.unrsi.lNC_28078 Address 3. Work Performed by Duke Eer gyC___rq.inasLLC .... ...Name 526 South Church Street. Charlotte, NC28201-1006 Address:591340-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: :N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity _1998. Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-250 Duke Energy 19898 N/A ýN/A N/A Removed No I MCA-ND-250 Duke Energy 38064 N/A " N/A N/A Installed No 7. Description of Work Rpe Additional Description Re 8. Tests Conducted: Hydrostatic F" Description (Optional): lacedCormponent/Part/Appurtenance eplaced snubber and bolting material on hanger IMCA-ND-250. Pneumatic F Nominal Operation Pressure r-Exempt 17 Other F Pressure____PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 12 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2: Flow Diagram No(s).: MCFD-1563.01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-ND-250 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-FWA-004 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date January, 11 2011 Owner or Owner's Designee, Title/CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period/_ -.to / 7-,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.By signing this ertificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner'tReport. Furthermore, neither the I ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF-Swan CommissionsNC1524,N-1 / ,nspector's Signature fNational Board, State, Province, and Endorsements DateU /"7 '20J--- FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/1/2010 1. Owner 2. Plant Duke Energy Carolinas, LI 526 South Church Street Cha NC 280 Sheet 1 o2 Address McGuire Nuclear Station Unit 1 Name 12700 Hagg g___err ~Road, Hq~ersyille.,_NC_2.8.0_78 Address 3. Work Performed by Duke Energy Caroinas4,LLC-------. Name 526 South Church Street,.Charlotte, NC 28201-1006 Address 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code :ASME II (b) Applicable Edition of Section XI used for Repair/Replacement Activity -1998 Editi (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 591378-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 19 71 Edition, ýSummer and Winter on with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCA-BB-4 10 Duke Energy 20943 N/A .N/A :N/A Rem-oved No 1MCA-BB-410 Duke Energy 38070 N/A :N/A N/A Installed No 7. Description of Work Additional Description LpaceC~omponent/Part/Apputepaitncep replaced snubber on hanger I1MCA-BB34 10 8. Tests Conducted: Hydrostatic r Pneumatic F Description (Optional): Nominal Operation Pressure IT Exempt F Other !" Pressure. _ PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of .2 Component Line Size: 3 *in. (nominal)System Class: ASME_Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).:.MCFD- 1580-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-BB-410 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Z 4 Date September 1 ,20 10.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina "and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period to ,/ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspection..JF Swan .Commissions NC1524, N-I Inspec Dateq -.. T tor's Signature National Board, State, Province, and Endorsements
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!Duke Energy Carolinas, LLC Date 9/1/2010..hrlt NC 28201 526 South Church Streetharlot, NCe 28201 Sheet 1 of 2 Address McGuire Nuclear Station Unit 1 Name 12700 Hagers FerU RoadHuntersvi!e, NC 28078 Address 3. Work Performed by Duke Energy Carolinas LLC Name 591379-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A.K I/A 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: '" 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME III 19771 Edition, iSummer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) .N/A 6_ Identification of flnm nonents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-BB-410
'Duke Energy ..20672 N/A .N/A .N/A Removed No IMCA-BB-410
- Duke Energy .
- 38057 N/A .!N/A N/A Installed No.7. Description of Work Replaced Component Additional Description replaced snubber on 8. Tests Conducted:
Hydrostatic F Pneumatic F Description (Optional): /Part/Apurtenance hanger 1 MCA-BB-4 10 Nominal Operation Pressure r" Exempt F Other F-Pressure PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal) System Class: A SMECClass_2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1580-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-BB-410 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date September 1 ,2010 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina "and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period.- .and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the I npector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan*Commissions NC 1524, N- I.Inspector's Signature National Board, State, Province, and Endorsements Date -7'20Z_0 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1. Owner .. DukeEnergyCarolinas.... .. ... Date 8/10/2010 C 526 South Church Street, Charlotte. NC. 28201 ........ ..Sheet _ of 2 Address 2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hag eys FetM__oa~d, Hu__nt ~svie,NC_2078 Address 3. Work Performed by DtkeEnergy aroinas, LLC.Name 526 South Church Street Charlotte, NC 28201-1006 Address:591386-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System NI- Safety Injection 5. (a) Applicable Construction Code ASME HI 19 71 Edition, Summer and Winter Addenda, ýN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NI-253 Duke Energy 20442 N/A ýN/A N/A Removed No IMCA-NI-253 Duke Energy .18000 N/A ;N/A N/A Removed No IMCA-NI-253 Duke Energy 37593 N/A .N/A .N/A Installed No IMCA-NI-253 Duke Energy 37589 N/A N/A N/A Installed No 7. Description of Work Re.Additional Description re 8. Tests Conducted: Hydrostatic F-Description (Optional):)lce omippnentlPart/A ppurtenanrce placed snubbers and bolting material on hanger I MCA-NI1-253. Pneumatic F Nominal Operation Pressure r" Exempt F Other r-Pressure*. PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 4 in. (nominal)Weld Isometric Drawing No(s).: N ./A System Class: ASME Class 2 Flow Diagram No(s).:.MCFD- 1562-03.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NI-253 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NIB-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 10 20 0__Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina in,, P,, 1, Hartford Steam Boiler Inspection and Insurance Company 4ýConnecticut have inspected the components described in this Owner's Report during the period"to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from l connected with this inspection..JF Swan ./,y"-Jj7 20 /r , Commissions NC1524, N1-n-specto Date _ _- /Z r's Signature I National Board, State, Province, and Endorsements 20L66 v W w FORM NIS-2 OWNER'S REPORT FOR REPA[IRREPLACEMENT ACTIVTY As Required by the Provisions of the ASME Code Section XI 1. Owner Duke En ergyCarolinas LLC Date 8/10/20 10 526 South Church StreetChar.oR, NC,_22 .. .... ...Sheet 1 of 2 Address 2. Plant McGuire Nuclear Station Unit 1.Name 12700 Hagers Ferry Road Huntersville,._NC 28078 Address 3. Work Performed by Duke Ener aroinaLL-..... ...Name 526 South Church StreetCharlotte, NC 28201-1006 Address 591387-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System NI- Safety Injection 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter Addenda, N/A Code Case Iitinn with the lQgO arnd 9A00 Addepndaz]ition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NI-255 Duke Energy 21807 N/A N/A N/A Removed No I MCA-NI-255 Duke Energy .37595 N/A N/A N/A Installed No 71-7. Description of Work Replaced Component Additional Description replaced snubber an 8. Tests Conducted: Hydrostatic F Pneumatic r Description (Optional): lPart/Appurternhange d bolting material on hanger I MCA-NI1-25 5.Nominal Operation Pressure F" Exempt F Other r-Pressure _ PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASME Class_2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1562-03.00 Support/Restraint Sketch/Drawing No(s).: IMCA-NI-255 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NIB-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date JN/A Signed FL Grass, Quality Assurance Technical Specialist \ Date August 10 2010 Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 4' 2t -Z-0 to .z?3L/ Z/ -,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Ow 's Report. Furthermore, neither th nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection JF Sa .Commissions NC1524, N-1 I7 ispctor' s Signature---"-/ National Board, State, Province, and Endorsements Da ,i 20
- 1. Owner 2. Plant Duke EnergyCaQroIin-as._L!
526 South Church Street, Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1__ .. ... ... ...... ...... ...-- -- .. ....... .. Date 8/19/2010 Charlotte,_NC,_282001 .... Sheet I of 2 Station Unit .I Name 12700 Hagersfeay Road, untersvy1ie,,NC28078 Address 3. Work Performed by Duke Energy Carolinas. LLC Name 526 South Church Street, CharlotteNC 28201-1006 Address 591390-01 Work Order# (or Repair/Replacement Organization P.O. No., Job No., etc..)Type Code Symbol Stamp: N/A Authorization No.: 'N/A Expiration Date: N/A 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity j!998 E-dition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped ComponentName of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No).IMCA-NS-88 Duke Energy 14918 N/A N/A N/A Removed No IMCA-NS-88 Duke Energy 37590 N/A N/A N/A Installed No 7. Description of Work Req Additional Description .re1 8. Tests Conducted: Hydrostatic F-Description (Optional): placed Component/Part/Appurtenance placed snubber and bolting material on hanger IMCA-NS-88. Pneumatic F Nominal Operation Pressure F Exempt iy Other F Pressure __PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: I0 in. (nominal) System Class: ASMECl!ass.2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1563-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NS-88 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NSB-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August, 19 ,20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period____________to 4'?-- Zand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither t e Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspectio JF Swan Am -2. --* .,,-,,,_. Commissions NC1524, N-I AV Inspector's Signatul. / --National Board. State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner Duke Energy _CaLrQlinas LLC .... ...... .... ..-. Date 6/15/2010 .....526 South Church Street CharlotteNC,8201 NC Sheet I of f 2 Address 2. Plant McGuire Nuclear Station Unit I Name 1?700 HaRqerq Ferry Road Huintersville-NC 28078 591420-01 Address 3. Work Performed by Duke Energy Carolinas LLC Name 526 South Church Street KCharlotte, NC 28201-1006 .Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III 19 71* Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section Xl used for Repair/Replacement Activity J198 Edition with the 19§99 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-SM-188 'Duke Energy .. .:19959 N/A 'N/A ......N/A Removed. No 1MCA-SM-188
- Duke Energy :21404 N/A :N/A N/A Installed No 7. Description of Work Re Additional Description Ri 8. Tests Conducted:
Hydrostatic [-Description (Optional): placed Cosnpone thart/Apngurtenance eplaced snubber on hanger I MCA-SM- 188.Pneumatic F Nominal Operation Pressure I Exempt F Other F Pressure PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 3 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 1593-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-SM-188 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMW-00i Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Techn ical- Specialist Date June, 15 -2010 Owner or Owner's Designee, Title -/CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period S -to -- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the I pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan PI ,c_,,k:- = Commisinns
- NC1524, N-I Inspector' Date/11 -/6 s Signaturl-National Board, State. Province, and Endorsements 2OZV
- 1. Owner 2. Plant fluke Fner~v Carolinas LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the .ASi'IE Code Section XI LC Date 7/15/2010 Charlotte, NC, 28201 Sheet I of 2 Duke Energv Ca linas L 526 South Church Street. (A dA,~McGuire Nuclear Station Name Unit I 12700 Hapers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 591421-01 Work Order # (or Repair/Replacement Organization P.O. No.. lob No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME IlI 192L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected.
ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Buuilt Installed (Yes or No)I MCA-SM- 192 Duke Energy 19965 N/A N/A N/A Removed No-IMCA-SM-192 Duke Energy 37855 N/A N/A N/A Installed No 7. Description of Work Rer Additional Description Re 8. Tests Conducted: Hydrostatic I Description (Optional):)laced Comiponent/Part/Appurtenance eplaced snubber on hanger IMCA-SM-192. Pneumatic r-Nominal Operation Pressure F'Exempt F7 Other F" Pressure.PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITr As Required by the Provisions of the AS.ME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 3 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1593-01.03 Support/Restraint Sketch/Drawing No(s).: I MCA-SM-192 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMW-001 Applicable Manuftcturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 15 .2010 I Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period-- -U to --/, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's eport. Furthermore, neither the Inspector r his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or onnected with this inspection.
- JF Swan 0 Commissions NC1524, N-I Inspetor' SigntureNational Board. State, Province, and Endorsemnents;
- 1. Owner 2. Plant Duke F.nerpv Carolinas LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl 1C Date 7/15/2010 Charlotte, NC. 28201 Sheet 1 of 2 Duke Enerpv Carolinas L 526 South Church Street.A AA....McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit I Address 3. Work Performed by Duke Energy Carolinas, LLC 591423-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A Name 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System 'SM -Main Steam 5. (a) Applicable Construction Code :ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected.
ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM-200 Duke Energy *21426 N/A N/A N/A Removed NO 1MCA-SM-200 Duke Energy 37860 N/A :N/A N/A Installed No 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced snubber on hanger IMCA-SM-200.
- 8. Tests Conducted:
Hydrostatic r Description (Optional): Pneumatic rT Nominal Operation Pressure I" Exempt F Other Fr Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1593-01.03 Support/Restraint Sketch/Drawing No(s).: I MCA-SM-200 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMW-002 Sheet 2 of 2 .Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 15 ,2010 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period (7 --z L to 17- ZS -- Z D. and state that to the best of my knowledge and belief, the Owner has performed examinations andtaken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner'Aeport. Furthermore, neither the Inspect nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o nnected with this inspection. Commissions NC1524, N-I In sSignature National Board. State. Province, and Endorsements Date9 , 20OJ
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI Duke EnergyCarolinas, LLC Date 8/19/2010 526 South Church Street CharlotteNC_28 Sheet I of 2 Address McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC ..Name 591484-01 591484-01 Work Order # (or RepairfReplacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authori7atinn No: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: N/A 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity J..998 Edition with ththe ,1999 and_20.00_Adden.d.a (c) Applicable Section Xi Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMC-1683-NVOI-R8A, Duke Energy .18117 N/A N/A N/A Removed No 1MC-1683-NVOI-R8A Duke Energy 21453 N/A N/A :N/A Installed No 7. Description of Work Re_Additional Description Re 8. Tests Conducted:
Hydrostatic F Description (Optional): laced Component/Part/Appiurte.nanc£e placed snubber on hanger I MC- 1683-NV-0 1 -R8A Pneumatic r-Nominal Operation Pressure 17 Exempt F Other -" Pressure ___ PSI Test Temp. _ °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASM Class 2 Flow Diagram No(s).: MCFD- 1554-03.01 Support/Restraint Sketch/Drawing No(s).: MG-I 1683-NV-0 -R8A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-MC-1683-01 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August, 19 ,20 10..Owner or Owner's Designee, Title /CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of;North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 131-/ to -10 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan Commissions NC1524, N-I/ nspector's Signature National Board, State, Province, and Endorsements Date t9 .20/o
- 1. Owner 2. Plant Duke Enerav Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date .5/19/2010 Charlotte _NC, 28201 Sheet 1 of 2'i2t~ Snnth flhitrch Sftee~t~526 South Church StreetI A ....,GUure55 McGuire Nuclear Station Name 12700 Hagers Road Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit .1 591489-01 3. Work Performed by WoTk Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: :N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System CF -Feedwater 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971: Edition :Summer and Winter ,ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-CF-152 Duke Energy 20525 N/A ýN/A N/A Removed No IMCA-CF-152
- Duke Energy 15870 N/A N/A N/A Removed No:lMCA-CF-152
- Duke Energy .36869 .N/A N/A N/A Instled No IMCA-CF-152 Duke Energy 36868 N/A N/A N/A Installed No 7. Description of Work Additional Description R(8. Tests Conducted:
Hydrostatic F Description (Optional):)l]ace(d -Comp&uenV4WAp-pujqr-Lanlc-e ~placed snubbers on hanger IlMCA-CF-152 Pneumatic r-T Nominal Operation Pressure IF Exempt F Other F Pressure _ PSI Test Temp. __ F FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 18 in. (nominal)Weld Isometric Drawing No(s).: 'N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 159 1-0 1.01 Support/Restraint Sketch/Drawing No(s).: IMCA-CF-152 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-CFC Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ..... Date May 19, 20 0 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of*Connecticut have inspected the components described in this Owner's Report during the period I.--- -- .to .-, -/'t , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner Report. Furthermore, neither thePspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan -InseCommissions 'NC 1524, N- I Inspct.or s Signature -National Board, State, Province, and Endorsements DatCl -5 0::U ,20:/"0
- 1. Owner 2. Plant Duke Energy Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 7,/19/2011 Charlotte, NC. 28201 Sheet I" of 2 526 South Church Street, McGuire Nuclear Station Name 12700 Hapers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Unit I ,591530-01 Work Order # (or RepairlReplacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: 'N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6_ rdentification of Com nenntn 192L Edition, Summer and Winter Addenda, N/A Code Case[ition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NS-85
..Duke Energy 21666 N/A :N/A :N/A Removed No 1MCA-NS-85 zDuke Energy 37822 N/A N/A N/A Installed No IMCA-NS-85 Duke Energy 21715 N/A N/A N/A Removed No 1MCA-NS-85 Duke Energy 37828 N/A :N/A N/A Installed No 7. Description of Work Ret Additional Description Re 8. Tests Conducted: Hydrostatic F" Description (Optional): ilaced Component/Part/Appurtenance eplaced snubbers and their bolting material on hanger I MCA NS-85.Pneumatic F" Nominal Operation Pressure FT Exempt [ Other [-Pressure ___PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 10 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1563-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NS-85 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NSB-001 Sheet 2 of ý2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist. 2 Date July 19 ,2011.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-ZL~LZ.............to... .and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the I ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. J Swan ! Commissions .NB 1473-NC 1524, N-I Inspector's Signature I- National Board, State, Province, and Endorsements (/ 7/c[Date 201/20-&Date FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 1. Owner Duke EnejgyCarolinas, LLC Date 7/22/2010 526 South Church Street CharlottN, NC 28201. --- ------- Sheet 1 of 2 Address 2. Plant McGuire Nuclear Station Unit 1 Name 12700 Ha ers Feury Road Huntersville NC 28078 Address 3. Work Performed by Duke Energy Carolinas LLC Name 526 South Church Street. Charlotte. NC 28201-1006 Address 59.1544-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME I1 19 71 Edition, Summer and Winter Addenda, :N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity .198 Edition with the 1999 and2000 Ad denda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-SM-69 Duke Energy 16548 N/A N/A N/A Removed No IMCA-SM-69 Duke Energy .17371 N/A N/A N/A Removed No 1 MCA-SM-69 Duke Energy .36600 N/A N/A N/A Installed No I MCA-SM-69 "Duke Energy 36599 N/A N/A N/A Installed NO 7. Description of Work Re Additional Description R(8. Tests Conducted: Hydrostatic F" Description (Optional): placed Com onent/Part/Appurtenance placed snubbers on hanger I1MCA-SM-69. Pneumatic r-Nominal Operation Pressure r" Exempt F Other F" Pressure PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 36 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASMECClass 2 Flow Diagram No(s).:.MCFD- 1593-01.03 Support/Restraint Sketch/Drawing No(s).: I MCA-SM-69 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-004 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist N-4:4% Date July 22 ,20 10 Owner or Owner's Designee, Title 4 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 17- 24& -le to __- 26? -/O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the In ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan 6]..z- .e.. -- Commissions NC1524, N-I 7' / Inspector's Signature National Board, State, Province, and Endorsements I
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REP(As Required by tih Duke Energy Carolinas.aLLC
.526_-South Church Strehet. Charlotte,N , 282 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078)RT FOR REPAIR/REPLACEMENT ACTIVITY e Provisions of the ASME Code Section XI Date 6/24/2010.. ...... Sheet I of 2 Address 3. Work Performed by Duke Energy Carolinas,_LLC Name 526 South Church Street. Charlo__e_ NC 28201-1006 Address Unit I:591553-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: ýN/A Expiration Date: N/A 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Comp onents 1971 Edition, Summer and Winter Lition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-SM-19 Duke Energy 16558 N/A N/A Removed N.o.IMCA-SM-19
- Duke Energy 36890 N/A
- N/A N/A Installed No 7. Description of Work Rep Additional Description re 8. Tests Conducted:
Hydrostatic IT Description (Optional): placed smponerntph.aertIA ppuienance placed snubber on hanger IMCA-SM-19 Pneumatic F" Nominal Operation Pressure -Exempt r" Other I-Pressure _ PSI Test Temp. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 42 in. (nominal) System Class: ASMEClass 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1593-0i.00 Support/Restraint Sketch/Drawing No(s).: I MCA-SM- 19 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-002 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N /A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist N$t' ,.. Date June 24 ,2010 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by-Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspecto nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne s Report. Furthermore, neithe e Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspecti.JF wanCommissions NC 1524, N-I S Inspector's Signature /National Board, State, Province, and Endorsements Date , 2q FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1. Owner Duke Energy Carolinas, LLC Date ý6/24/2010 526 South Church Street-,Charloe 20.. .. _C Sheet 1 of 2 Address 2. Plant McGuire Nuclear Station Unit 1 Name 12700 Hagers Ferry Road Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte NC 28201-1006 Address ,591553-12 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4.5.6.Identification of System SM -Main Steam (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A Identification of Comronents 19 71 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, ;N/A Code Case Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM-19 Duke Energy 15682 N/A N/A N/A Removed No IMCA-SM- 19 Duke Energy 36882 N/A 'N/A N/A Installed No 7. Description of Work Re Additional Description re 8. Tests Conducted: Hydrostatic F Description (Optional): placed Comp onent/Part/Appau-ten ance placed snubber on hanger 1MCA-SM-19 Pneumatic r Nominal Operation Pressure F Exempt r- Other r Pressure;PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 42 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1593-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-SM-19 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-002 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist C .s Date June 24 2010 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of._Connecticut__ have inspected the components described in this Owner's Report during the period-, C) [O to ---."( () ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing th* certificate neither the Inspecto or his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Report. Furthermore, neith e Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising connected with this inspect' n.:JF Swan , A. c .........Commissions NC1524, N-I Inspector's National Board, State, Province, and Endorsements I
- 1. Owner Duke Ei 526 So 2. Plant 3. Work Performed by nergv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi LC Date 10/25/2011 Charlotte, NC, 28201 Sheet I of 2 uth Church Street, McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Enerpv Carolinas. LLC Unit 1 592066-31 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A NI/A Name 526 South Church Street. Charlotte, NC 2820 1-1006 Address Expiration Date: 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME III 192-1 Edition,: Summer and Winter Addenda, ;N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Nameof Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-BB-402 'Duke Energy N/A NA 'N/A N/A Installed.No
- 7. Description of Work Rer Additional Description Re 8. Tests Conducted:
Hydrostatic F Description (Optional):)laced Component/Part/Appurtenance eplaced bolting material on clamp of hanger I MCA-BB-402. Pneumatic F" Nominal Operation Pressure F Exempt F Other F Pressure PSI Test Temp. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: N/A Support/Restraint Sketch/Drawing No(s).: IMCA-BB-402 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on N IS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 25 _ 20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period A .....-.. to... ' , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspecti.JF Swan Commissions .NBI 1473-NC 1524, N-I National Board, State, Province, and Endorsements D _ _ _ 20
- 1. Owner Duke Energy Carolinas.
LL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI-'C Date 10/15/2011 Charlotte. NC. 28201 Sheet '1I of 2 526 South Church Street.Address 2. Plant 3. Work Performed by McGuire Nuclear Station Name_12700 Hapers Ferry Road. Huntersville. NC 28078 Unit 1 592066-35 Address Duke Energy Carolinas. LLC Unit !592066-35 Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: N/A 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME Ill 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Com onents Name of Corrected, ASME Code Component Manufacturer National Other Year Removed, or Stamped Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1BB4 Borg Warner 9090 114 V File# 851 1976 Removed Yes I.!BB4 Flowserve .23BRW 2747 N/A 2011 Corrected Yes 11~~~2 1 ... .. ..r*... ... .. ..7. Description of Work Replaced Component/ParttAppurtenance Additional Description Cut out and replaced valve I BB4.8. Tests Conducted: Hydrostatic " Pneumatic -Nominal Operation Pressure P7 Exempt r Other " Pressure 1062 PSI Test Temp. 553 OF Description (Optional): test performed per procedure MP/0/A/7650/076. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: MCFI- BB27 & 29 Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1580-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE 1 certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ", .Date October 15 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by. Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period/"to -/Z- //, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection..JF Swan o2 v-L.,. NBI 1473-NC 1524. N-1 6/Inspector's -igna(ure-_--/ Dateo -/9 National Board, State. Province, and Endorsements 201// FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES*As Required by the Provisions of the ASME Code, Section III, Division 1 2-3Pg. 1 of 1. Manufactured and cartified by Rowserve Corporation, 1900 Sou id 5;unders St. Raleiqh. NC 27603.:...- mnamna mid addre1 ao N Ceriflcate Holderl 2. Manufactured for Duke Energy P0 BoX 37925 Charlotte, Nc .28237 Inama pin d eadresa of Purhaasr)3. Location of installation McGuire Site 13225 Hagers Ferry (HWY 73) Huntersvlile, NC 28078-8985;(name end nddrea.l 4. Model No., Series No., or Type 1500 GSate Valve Drawing 74S0 Rov. E CRN N/A 5. ASME Coda, Seotion III, Division 1: 1971,--' Summer 1973
- 2 " N/A _(adldenj (addanda datal (*l (Code Cue j no.-0. Pump or valve Valve Nominal inlet size 2 Outlet size 2 (in) (in.)7. Material: (a) valve Body SA182-F316 Bonnet SA18Z-F316 Disk SA351-"FMM Bolting N/A (b) pump Casing C6ver -olcing -(a)Cort Holder's serial No.228RW..-23BPW~24BRW j/ib)Neil Board No.2746V 2747'-2748.(a]V'zdylCasing Serial No.____ A2-150 .- ,~AZ-151 (d)Bonnet/Cover Serial No.LO265-1-2
'L0265-1-2 (e)Diskc seralh No.N9S19-10 N9519-11 W919-12'Supplamen~l inlornnetion in the foam of li~, eketchea, or drawings may be used provided (ii sIze I. SWx 11,12) Nforrnstior. in item. 1 through 4 on*Supplemental Information In the form of rim", asktrhes, or drawings may Ibe usned provided (1) size Is 81/zx 11, 12) ihformatiorn In Items I through 4 on iz included on each sheet, (31 eacth sheet is numbered and the number of t.heats Is reorded at the top of form.,7f 0-72 -o 7Y FORM NPV-1 (Biack -Pg. 2 of 2 "9 Certificate Holder'i Serial No. 2ZBRW THU 248RW 8.Dsgncniios 10 a. Design conditions 1200 psi 567F or valve pressure class 1500(tamfperal 1 o a- Cold working pressure 3600 " ..psi at I OUT 540 VI000 10. Hydrostatic test psi. Disk differential te,:t r:'Qe&ure psi 11. Remarks: S 60701 DQAN PIPE- MATL: SA312-304. HEAT: E3JL Z CERTIFIrCA1ON OF DESIGN Design Specification certified by R..MIller P E. State SC Rag. no. 4237 Design Report certified by N/A P.E. state .Reg. no. N/A CERTINiCAIE OF COMPLIANCE We ertify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Coda, Section III, Division 1.N-1562 1-2-1 N Certificate of Authorization No. N-_ _ _2_ Expires 11-26-12 Date -iLLZZ2ALt Name HO~ev Co~oration
- .ne~i : IN Cartlflenta loldvl1 louthailzed cMRTiW(CArE OF INSPEeTION I, the undersigned, holding a valid commission Issued by the Naijonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of NC and employed by l HB C 1 0 f Haof Haf .. .. .,..... have inspected the pump, or valve, d6scribed In this Data Report on/.2/ IL-.. "~ .and stat thatto the best of my kiowledge and belief, the Certificate Holder has constructed this pump, or valve, In aorcrdanra with the ASME Code, Section IIl, Division 1.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceqrning the component described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any persbhal injury or property damage or a loss of any kind ariling from or connected with this inapticion.
Date 2Y&nLL Signed Commissions ,-J,6'/7o(f 0 Al ),I7 7Notr. (md. andoruawne sod tem Rmev. and no.1
- 1. Owner 2. Plant Duke Enerpv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/16/2011 Charlotte, NC, 28201 Sheet .1 of 2 526 South Church Street. IMcGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Enemy Carolinas, LLC Name Unit I 592067-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)3. Work Performed by Type Code Symbol Stamp: N/A Authorization No.: N/A-...."NA/A " 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: £ "fl 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME I11 1971 Edition, Summer and Winter Addenda, ýN/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section Xl Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1BB5 Borg warner 9079 86 V File# 822 :1976 Removed Yes IBB5 Flowserve 05BPK 2502 N/A .2009 Installed Yes 7. Description of Work Additional Description Replaced Comoonent/Part/Agpourtenance.Cut out and replaced valve I BB5 8. Tests Conducted: Hydrostatic F- Pneumatic r Nominal Operation Pressure P' Exempt F" Description (Optional): test performed per procedure MP/O/A/7650/076 on w/o 1960873 (IS1 test 6-b).Other F- Pressure .953 PSI Test Temp. 530 OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 vin. (nominal)Weld Isometric Drawing No(s).: MCFI-IBB7 & I I Sheet 2 of'2 System Class: ASME Class 2 Flow Diagram No(s).: :MCF Support/Restraint Sketch/Drawing No(s).: N/A D -1580-0............... .... .....Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: *PIP# M-04-2672 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASMECode, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date NIA Signed IFL Grass, Quality Assurance Technical Specialist Date October 16 "120 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province ofýNorth Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 9- 2: /7 to "e" /9" , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection F Swan L, .Commissions NBI 1473-NC1524, N-I Ins pector's Si gna ture .National Board. State. Province, and Endorsements Date /.........
- 20. .
pc 6I011 0'9L I FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES*As Required by the Provisions of the ASME Code, Section III, Division 1 P!2 g. 1. Manufactured and certified by. Rowserve Corporation, 1900 South Saunders St. Raleigh, NC 27603 (name and address of N Certificate Holder)2. Manufactured for Duke Energy PO Box 37925. Charlotte, NC 28237 Iname and address of Purchase)3. Location of installation -McGuire Site 13225 Hagers Ferry (HWY 73) Huntersville, NC 28078-8985 Iname and address)4. Model No.. Series No., or Type 1500# Gate Valve Drawing 74450 Rev. C CRN N/A 5. ASME Code, Section III, Division 1: 1971 Summer 1973 2 N/A ladition) (addenda date (Ictas) (Code Case no.)6. Pump or valve Valve Nominal inlet size 2 Outlet size 2 tin.) fin.)7. Material: (a) valve Body SA182-F316 Bonnet SA182F316 Disk SA351-F.8M Bolting N/A (b) pump Casing Cover Bolting ta)Cen.Holder's Serial No.0413PK-n- OSBPK Wb'Nat'l Board No.2501 .ef 2502por Wc BodylCasing Serial No.A2-79 (d) (et Bonnet/Cover Disk Serial Serial No. No.38427-1-3--__ N9S19-8 18427-1-4 N9519-9*Supplemental information in the form of lists, sketches, or drawings may be used provided (1) size Is 81/2 x 11, (2) information in Items 1 through 4 on this Data Report is included on each sheet. (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.igf 0(a/7 e I FORM NPV-1 (Back -Pg. 2 of 2 02BPK THRU O5BPK /7 Certificate Holder's Serial No. 02BPK___________
- 8. Design conditions 1200 psi 567 *F or valve pressure class 1500 (pressure)
Itempetature)
- 9. Cold working pressure 3600 psi at 100 0 F 5400 3960 10. Hydrostatic test psi. Disk differential test pressure psi 11. Remarks: S.Q. 53881 DRAIN PIPE- MATL: SA312-304.
HEAT: 801951 CERTIFICATION OF DESIGN R.E.Mi _____________er_____SC 4237 Design Specification certified by R.E.MilPer PE. State S Reg. no. 42-37 Design Report certified by N/A P.E. State NIA Reg. no.CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pump or valve conforms to th~e rules for construction of the ASME Code, Section III, Division 1.N Certificate of Authorization No. N-1562 Expires 11-26-09 Date /O Name Flowserve Corporation Signed IN cer~tifcate Holder) Signed reenade CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of NC and employed by HSB CT.of Hartford, CT have inspected the pump, or valve, described in this Data Report on 11, 13 &1 , and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code, Section III, Division 1.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described in this Data Report Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Date Sign Commissions N-.,(- O lAutIIts ucles Inspector INefl'. Bd. tinsl. endorsements) and State Oa tfoy. end no.)uto 4+9 3toG/7 7 FORM NIS-2 OWNER'S REPORT FOR REPAIR/RE PLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/16/2011
- 1. Owner 2. Plant Duke FnerLv Carolinas.
LI 526 South Church Street, Charlottea, NC 28201 Address McGuire Nuclear Station Name Sheet I of 2 Unit I 592068-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME lII (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Namneof Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No).BB6 Borg Warner 9076 83 V File# 822 1976 Removed Yes IBB6 Flowserve 22BRW 2746 N/A 2011 Installed Yes 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Cut out and replaced valve I BB6 8. Tests Conducted: Hydrostatic F Pneumatic F Nominal Operation Pressure F, Exempt F Other F Description (Optional): test performed per procedure MP/0/A/7650/076 on w/o 1960873 (ISI test 6-b.Pressure 953 PSI Test Temp. 530 OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-1BB6 & 42 Flow Diagram No(s).: MCFD-1580-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: PIP# M-04-2672 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist " Date October 16 ,2011 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of*Connecticut have inspected the components described in this Owner's Report during the period" -to /iZi" i , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection
- JF Swan,. V LOY, Commissions NBI 1473-NC1524, N-I National Board. State, Province, and Endorsements Da _- /_ .?, 20_ _
FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS Oft VALVES*As Required by the Provisions of the ASME Code, Section III, Division 1of 2 1. Manufactured and certified by Rowserve Corporation, 1900 South Saunders St. Raleigh, NC 27603 (.. .. .and n ddr&W of N Car'tte0ta N 6d..l 2. Manufactured for Duke Energy PO Box 37925 Charlotte, NC 28237 (nOme and Sddrtas of Put chaser)3. Lovanon of installation McGuire Site 13225 Hagers Ferry (I (AY 73) Huntersville, NC 28078-8985
- 4. Model No., Series No., or Type 1500# Gate Valve Drawing 74450 Rev. CRN N/A 5. ASME Code, Section I1l, Division : 1971 Summer 1973. 2 -. N/A C=ltlznl l0"(addends detal (dau (Cedo Cain no.1 6. Pump or valve Valve Nominal inlet size .2 Outlet size 2 i,n. oInr.)7. Material;(a) valve (b) pump Body SA182-F316 Bonnet SA182-P316 Dirk SA3S1-U8M Botitg NA Casing Cover -oltiig Ia) (bi (cl Cert. Natl Body/Casing fHolder's Board Serial Serial No. No. No.' 22BRW ., 2746 ./ A2-150 7, -`23BRW .X " 2747-" A2-151 ,* R4BRW 2748. A245ZE Supplemental Informaation in the fonm of l"Sts. sketches, or drawings ma~,-Is Included on each shoot, (3) each sheet is numbered and the nurnijqr of sheets Is recordecs at uim ld)Pom'et/Cover 1 serial No.L0265-1-2 I L0265-1-3
'(el No.WS539-10 N9519-12.N9519-12 (2) Inforrriadon in items 1 through 4 on this Data FAp no.. .'. W FORM NPV-1 (Back -Pg. 2 .of 2 22.BiWTHRU 243RW Certificate Holder's perial No.B. Design conditions 1200 psi 567 .. *F or valve pressure class 1.00 (prasaurlI atnparatut bi 9. Cold working presur , 3600, psi at 100F4.00 J4000 7-10. Hydrostatic te5t psi. Disk differential test prressure psi 11. Remarks: S-O, 60701 ......DIWAIN IPE-- MAUL: SA312-304. HEAT: E33L ._," CERTIr-CATION OF DESIGN Design Specifigatlon certified by R.E.Milier P.C. State SC Reg. rio. 4237 Design Report certified by -N/A RPE. State N/A Reg. no.CERTIFICA7 E OF COMPLIANCE We oeify that the statements made in this report are corr-e.t ,ad that this pump or valve conforms to the- rules for construction of the ASME Code, Section III, Division 1. 11-26-12 N Certifloate of Authorization No. N-1562 -' Expires Date Name Flowserve corpoatio Signed___(N C llertif Ica I Hold, I (suchorixd repfaantdvole-CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of NC and employed by HSB CT I of Hadford, CT have inspected the pump, or valve, described In this Data Report on" o r and state that to the best of my knowledge and belief, the Certificate Hoider has constructed this pump, or valve, in accordan6 with the ASME Code, Section III, Division 1.By signing this certificate neither the inspector nor his employer makes any warranty, expressed or Implied, ooncernlng the component described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection J..Date Sind-- Commissions A4614(-70' AlJ/ -AJ"IV'Z I I utnq1=d uc~br I pdr.ri Nonf. 6d. lnal. anaoromernts n d stav atsua prov. prid nb.-I
- 1. Owner 2. Plant Duke Energy Carolinas, Li FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/15/2011 Charlotte, NC, 28201 Sheet 1 of 2 526 South Church Street.-,. A McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Unit I 1784845-04 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte.
NC 28201-1006 Address 4. Identification of System 5. (a) Applicable Construction Code ASME III 1971 Edition, Summerand Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)INC57 TRW Mission 5 1-5293 N/A 1978 Installed Yes 7, Description of Work Replaced Component/Part/Appurtenance Additional Description Replaced disc in valve I NC57 8, Tests Conducted: Hydrostatic F Pneumatic F" Nominal Operation Pressure I7 Description (Optional): test performed per procedure MP/O/A/7700/045. Exempt FT Other F" Pressure PSI Test Temp. IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions ofthe ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: MCFI-INCi8 Flow Diagram No(s).: MCFD-1553-02.0I Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 15 ,20-Ll-Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period-to/ 1 0 /7-- 4 // and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his em loyer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspe r nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising 7 or connected with this inspection. JF Swanf 4y_,.t. ... ]- /7 ... Commisions NBI1473-NC1524, N-I DaC____Inspector's Signature /National Board, State, Province, and Endorsements 201/
- 1. Owner 2. Plant Duke Energv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date '9/27/2011 Charlotte, NC. 28201 Sheet : I of.2 526 South Church Street.McGuire Nuclear Station Name Unit _1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1794709-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: .N/A Expiration Date: IN/A 526 South Church Street. Charlotte. NC 28201-1006 526 South Church Street- Charlotte NC 28201-1006 Address 4. Identification of System VQ -Containment Air Release and Ventilation
- 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section Xl used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, -Summer and Winter Addenda, N/A Code Case ition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-VQ-514 Duke Energy 21712 N/A N/A N/A Removed No I MCR-VQ-5 14 IDuke Energy 37870 N/A N/A N/A. Installed No...... ........ ....., , ... ... ..!i .... ...........i l l. .... ................
..... ..7. Description of Work Additional Description Replaced Component/Part/Appurtenance.Replaced snubber on hanger IMCR-VQ-514
- 8. Tests Conducted:
Hydrostatic I Description (Optional): Pneumatic F Nominal Operation Pressure I" Exempt F OtherF Pressure ___ PSI Test Temp. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1585-01.00 Support/Restraint Sketch/Drawing No(s).: IMCR-VQ-514 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist '? 4 Date September 27 ,20 1L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of::North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period' 2 -'7. /./ "to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the l pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. IJF Swan .Commissions NBI 1473-NC1524, N-I Inspector's Signature' 11 Cte2 -National Board, State, Province, and Endorsements 2o_1/
- 1. Owner 2. Plant Duke Enerav Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/27/2011 Charlotte, NC, 28201 Sheet 1 of 1 2 926 South Church Street.526 South Church Street McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas.
LLC Name 1794711-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A XT/ A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System VQ -Containment Air Release and Ventilation
- 5. (a) Applicable Construction Code ASME III 1972L Edition, Summer and Winter Addenda, !N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-VQ-506 Duke Energy 19219 N/A ..N/A N/A Removed No I MCR-VQ-506 Duke Energy 37824 N/A N/A N/A Installed No 7. Description of Work Rev Additional Description Re 8. Tests Conducted:
Hydrostatic 'Description (Optional): placed Component/Part/Appurtenance tplaced snubber and it's bolting material on hangerI MCR-VQ-506. _________________ Pneumatic r Nominal Operation Pressure rT Exempt [ Other rT Pressure. PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A.Flow Diagram No(s).: MCFD-1585-01.00 Support/Restraint Sketch/Drawing No(s).: I MCR-VQ-506 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Date September 27 ,20 1L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period 7- a / to R. .L7--{ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from orhnected with this inspection. JF Swan (I / ,-- -r'-p 2----- Cnmmisinno NBi 1473-NC1524, N-I Inspector's Signature Date r 9 20L/National Board, State, Province, and Endorsements
- 1. Owner 2. Plant..........
~ Caroli.. ..a.. I--FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl LC Date 9/30/2011 Charlotte, NC, 28201 Sheet :; 1 of .2 Duke Energv Carolinas L 526 South Church Street.I Address McGuire Nuclear Station Name 12700 Haaers Ferry Road. Huntersville, NC 28078 Address 3. Work Performed by Duke Eneray Carolinas, LLC Name Unit 1.1794735-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System NI -Safety Injection 5. (a) Applicable Construction Code ASMEIII 1921 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)NI-100-04-Y Duke Energy 2325 N/A N/A N/A Removed No NI-100-04-Y Duke Energy 37043 N/A N/A N/A Installed No 7. Description of Work Rev Additional Description Re 8. Tests Conducted: Hydrostatic FT Description (Optional): ilaced Component/Part/Appurtenancesnubber and it's bolting material on hanger I MCR-S-NI-I 00-04-Y Pneumatic ['Nominal Operation Pressure F Exempt F Other F Pressure PSI Test Temp. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-l 562-02.00 Support/Restraint Sketch/Drawing No(s).: IMCR-S-NI-00-04-Y Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist \ " " .Date September 30 , 2011L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of!North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut have inspected the components described in this Owner's Report during the period-to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspec n.iJF Swan Commissions NBI 1473-NC1524, N-I Inspector's SignatU e " National Board, State, Province, and Endorsements /_/L
- 1. Owner 2. Plant Duke Eneray Carolinas, L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/3/2011 Charlotte, NC, 28201 Sheet I of 2 526 South Church Street, A AAre McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Fnergv Carolinas.
LLC Unit I 1794752-01
- 3. Work Performed by Work Order # (or Repair/Replacement Organization P.O. No.,.lob No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A"KI/A Name 526 South Church Street. Charlotte.
NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME IIl 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-NV-1214 Duke Energy 19955 N/A N/A N/A Removed No IMCR-NV-1214 Duke Energy 37610 N/A N/A N/A Installed No] i " " 7. Description of Work Re Additional Description R_8. Tests Conducted: Hydrostatic -Description (Optional):)laced Component/Part/Appurtenance eplaced snubber on hanger I MCR-NV- 1214 Pneumatic F Nominal Operation Pressure F'Exempt F' Other F-Pressure PSI Test Temp. *__ FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1554-01.02 Support/Restraint Sketch/Drawing No(s).: IMCR-NV- 1214 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 3 ,20 1I Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period:7o -'- 1/- / -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neithethe Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fromi connected with this inspec .Commissions NBI 1473-NC1524, N-I Inspector's Signat~un- °National Board, State, Province, and Endorsements 1o- /
- 1. Owner fluke Fnert~v ('.arnIin~
1.1 FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date :10/3/2011 Charlotte, NC, 28201 Sheet 1 of 2 Duke Enerpv C olinas L 526 South Church Street.526 outhChuch Sree 2. Plant 3. Work Performed by McGuire Nuclear Station Name 12700 Hacers Ferry Road. Huntersville. NC 28078 Unit 1 1794755-01 Address Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: ....4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME II 197L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped C om ponentIn t l e( Y s o N )Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-NV-1213 Duke Energy 21679 N/A :NA N/A Removed No IMCR-NV-1213 Duke Energy 37603 N/A N/A N/A Installed No 7. Description of Work Additional Description.Replaced Comnonent/PartlAppIurtenance Replaced snubber on hanger I MCR-NV- 1213 8. Tests Conducted: Hydrostatic F'Description (Optional): Pneumatic F" Nominal Operation Pressure F Exempt 1l Other F Pressure PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions oftthe ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 3 in. (nominal)Weld Isometric Drawing No(s).: N/A System-Class: ASMEClass2 Flow Diagram No(s).: MCFD-1554-0l .02 Support/Restraint Sketch/Drawing No(s).: I MCR-NV- 121-3 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 3 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina Connecticut and employed by Hartford Steam Boiler Inspection and Insurance Company of have inspected the components described in this Owner's Report during the period..7z-..e27. 2zLto, Z4Q "7 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section.XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own,'s Report. Furthermore, neither 9A Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro Tr connected with this inspectio JF Swan -Commi.sion .NBI 1473-NC1524, N-I Dat Inspector's Sigriature-ý /National Board, State, Province, and Endorsements 20/ /Dat 2011
- 1. Owner 2. Plant Duke Energv Carolinas L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi Date :9/23/2011 Charlotte, NC, 28201 Sheet I of 2 526 South Church Street Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Unit I 1794757-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 10 1 A Name 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: I"f 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME Il 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-NV-1206 Duke Energy 20744 N/A ..N/A N/A Removed No IMCR-NV-1206 Duke Energy 37612 -N/A .N/A N/A Installed No 7. Description of Work Ret Additional Description R 8. Tests Conducted:
Hydrostatic F Description (Optional): placed Component/Part/Appurtenance-placed snubber and it's bolting material on hanger IMCR-NV-1206 Pneumatic Fr Nominal Operation Pressure rT Exempt F Other F" Pressure PSI Test Temp. O__ F FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal)Sheet 2 of 2 System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1554-01.02 Support/Restraint Sketch/Drawing No(s).: I MCR-NV- 1206 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on.NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist " Date September 23 ,20 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:*Connecticut have inspected the components described in this Owner's Report during the period r7- -/ to -.and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's *eport. Furthermore, neither th Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o nnected with this inspection. '.JF Swan 7 [-Commissions NBI 1473-NC 1524, N-I Inspector's Signature" National Board, State, Province, and Endorsements
- 1. Owner 2. Plant fliik~ Pnpi-crv C~~rn1inne 1.1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date 9/23/2011 Charlotte, NC, 28201 Sheet : I of .2 Duke Enerov Carolinas L 526 South Church Street.A AA..McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit I 3. Work Performed by 1794773-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A.... ..N/A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date:...4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME I1 I 971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-NV-1201 Duke Energy 20576 N/A N/A N/A Removed No 1MCR-NV-1201
- Duke Energy 37601 N/A N/A N/A Installed No 7. Description of Work Rep Additional Description Re 8. Tests Conducted:
Hydrostatic " Description (Optional): ~laced Component/Part/Appurtenance ~placed snubber and it's bolting material on hanger I MCR-NV- 1201 Pneumatic F Nominal Operation Pressure '-Exempt F Other F Pressure _ _PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVI CY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD- 1554-01.02 Support/Restraint Sketch/Drawing No(s).: I MCR-NV- 1201 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI, Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 23 ,2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION [, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period'7 -7_/ -Lto 2, I/ ... , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising frorn4r connected with this inspection./.JF Swan 7 _- -Commissions NB l1473-NCI524, N-Date-7 Inspector's Signature, /9-R7 National Board, State, Province, and Endorsements 20 &- FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMITY As Required by the Provisions of the ASME Code Section XI LC Date 9/27/2011 1. Owner 2. Plant Duke Enery Carolinas, LI 12700Sut Chaersh Fterthrl otte. unC.rvile,20107 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet .of.2 Unit 1 1794774-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASMElI 1971 Edition, Summerand Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-NV-1043 Duke Energy 19894 N/A zN/A N/A Removed No IMCR-NV-1043 Duke Energy 38527 N/A N/A IN/A Installed No 7. Description of Work Replaced Compbonent/Part/AIpurtenance Additional Description R 8. Tests Conducted: Hydrostatic I" Description (Optional): eplaced snubber on hanger 1 MCR-NV- 1043 Pneumatic F Nominal Operation Pressure fT Exempt 1F Other F Pressure PSI Test Temp. -°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 15 Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1554-01 .02 Support/Restraint Sketch/Drawing No(s).: IMCR-NV- 1043 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp :N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 27 _,20L.Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of have inspected the components described in this Owner's Report during the period.Connecticut
- / ) '7 1/' to ' , /( ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's ieport. Furthermore, neither the Inspe or nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o nnected with this inspection.
JF Swan -,,, Commissions NBI 1473-NC 1524, N-I-Inspector's Signature " National Board, State, Province, and Endorsements D t ro-)-D~ 9 te 20 20-/Z
- 1. Owner 2. Plant D.ke.......
Caro na. -L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!Date 10/1/2011 Charlotte, NC, 28201 Sheet .1 of 2 Duke EnerLyv Carolin L 526 South Church Street, (A.uuress McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte, NC 28201-1006 Unit I 1794895-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A XKT A Address Expiration Date: 4. Identification of System ýNV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 192_L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)*MCR-INV-581 Duke Energy 20712 N/A N/A N/A Removed No:MCR-lNV-581 -Duke Energy 37600 N/A N/A N/A Installed No ,__.. _. __... .__. _.. .. .._ ..._______________ _____________ ___________ ____, ___________ ____ ______._____ ______7. Description of Work Re Additional Description R 8. Tests Conducted: Hydrostatic F-Description (Optional):)laced Component/Part/Appurtenance eplaced snubber and it's bolting material on hanger MCR-INV-581 Pneumatic F Nominal Operation Pressure F'Exempt F7 Other r'T Pressure___PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 1554-02.01 Support/Restraint Sketch/Drawing No(s).: MCR-INV-581 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist .Date October 1 )2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period to.-a- //) _/- / ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's port. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o cnnected with this inspection.Swan -,-Commissions NBI 1473-NC 1524, N-I n~scor'sSigntureNational Board. State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/27/2011 1. Owner 2. Plant Duke Enerey Carolinas. Ll I 526 South Church Street, Charlotte, NC, 28201 Sheet '1 of 2 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit I 11794896-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Address 3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 19 71 Edition, 'Summer and Winter Addenda, *N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-NV-545 Duke Energy .19900 N/A ;N/A N/A Removed No IMCR-NV-545 Duke Energy 38410 :N/A 'N/A N/A Installed No....: ............ .......... .... .... ...7. Description of Work Replaced Component/Part/A1purtenance Additional Description R 8. Tests Conducted: Hydrostatic F Description (Optional): eplaced snubber on hanger I MCR-NV-545 Pneumatic r" Nominal Operation Pressure '-Exempt F: Other r-Pressure: PSI Test Temp. O_°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1 554-01.00 Support/Restraint Sketch/Drawing No(s).: I MCR-NV-545 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist "Z7KS ..L.. Date September 27 , 201.Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period-,ý 2 1[ to .' 9 .' /7.../, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither tif Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fromo connected with this inspectio.JF Swan L /7 .Commissions NB11473-NC1524, N-I Dateu-Inspector's Signature 1 National Board, State, Province, and Endorsements 2 0_J
- 1. Owner 2. Plant Duke Energy Carolinas, LL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 6/30/201 Charlotte, NC, 28201 Sheet '1 of 2 526 South Church Street, McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1794903-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A.-\I/A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: '"'4. Identification of System CA -Auxiliary Feedwater 5. (a) Applicable Construction Code ASME III 192., Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-CA-411 Duke Energy 16091 N/A N/A N/A Removed No I MCA-CA-41 I Duke Energy 37875 N/A N/A N/A Installed No 7. Description of Work Ad Additional Description R 8. Tests Conducted:
Hydrostatic F Description (Optional): d New Comnonent/Part/Angurtenance/Weld eplaced snubber on hanger I MCA -CA-41 I Pneumatic F Nominal Operation Pressure F Exempt F* Other F Pressure PSI Test Temp. __ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASMEClass2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1592-01.00 Support/Restraint Sketch/Drawing No(s).: 1 MCA-CA-411 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-CAN-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed I.FL Grass, Quality Assurance Technical Specialist Date Juneb 30 ,20.1I Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 6 -to 2 -state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan ; 2 Commissions NB11473-NC1524,NI i nspetor's Signature National Board, State, Province, and Endorsements
- 1. Owner 2. Plant Duke Enerv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 7/13/2010 Charlotte, NC, 28201 Sheet I ý of 2 I 526 South Church Street, 4 Address McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Enerzy Carolinas, LLC Name 1794904-01 Work Order # (or Repair/Replacement Organization P.O. No.,.lob No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A*KI/A 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 1971. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yesor NO)INCA-NV-306
- Duke Energy 20531 N/A IN/A N/A Removed No 1NCA-NV-306
- Duke Energy .37050 :N/A :N/A N/A Installed No.......* .. * *... .i :.... ..... .. .....7. Description of Work Rer Additional Description Re 8. Tests Conducted:
Hydrostatic F Description (Optional): ~UOLAt S..AJIIALfl)Ik'~,flhL~ u an u n.IJIJUL I. flUE L'.~L, tplaced snubber and it's bolting material on hanger I MCA-NV-306 Pneumatic FT Nominal Operation Pressure FT Exempt F Other F" Pressure__ PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 .in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-1556-01.01 Support/Restraint Sketch/Drawing No(s).: I MCA-NV-306 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NB-306-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 13 ,20i. -Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of NorthCarolina .and employed by Hartford Steam Boiler Inspection and Insurance Company of iConnecticut have inspected the components described in this Owner's Report during the period.i /i to .,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne Report. Furthermore, neither the Inspecto or his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro connected with this inspection. Commissions NC 1524, N-I Inspector's Signature ...... .National Board. State. Province. and Endorsements ter-3 2 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Proisions of the ASME Code Section XI LC Date *2/28/2011
- 1. Owner 2. Plant Duke Enery Carolinas, LI~2ij S~A,1th t2hiir~2h 5~tre~et flharlnttn NC> 2R201 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet I of 2 Unit I 1794905-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System :ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter lition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCA-ND-272
!Duke Energy :14925 N/A N/A N/A Removed No 1MCA-ND-272 .Duke Energy .37591 N/A .:N/A N/A Installed No 7. Description of Work Replaced Component/Part/Appurtenance Additional Description R 8. Tests Conducted: Hydrostatic F Description (Optional): eplaced snubber and it's bolting material on hanger I MCA-ND-272. Pneumatic F'Nominal Operation Pressure F-Exempt [ Other r" Pressure PSI Test Temp. _ OF_ . FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 8 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: :MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-ND-272 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date February 28 20 11.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the periodt and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section X1.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this On' Rert. Furthermore, neither the Ins t his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fm connected with this inspection. JF Swan Commissions NC 1524, N- I Inspector's Signature National Board. State, Province. and Endorsements /I
- 1. Owner 2. Plant Duke Energy Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/8/2011 Charlotte, NC. 28201 Sheet i of.2.26.S..th........Street' 526 South Church Street A AA.-, McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by, Duke Energy Carolinas, LLC Name 1794907-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) 'N/A 6. Identification of Components 197t Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MC1683-NV.04-R33 Duke Energy 21166 N/A .N/A N/A Removed No 1MC1683-NV.04-R33 Duke Energy 38395 ..N/A .N/A .N/A Installed No... .... ... ....... ..7. Description of Work Rey Additional Description R_8. Tests Conducted:
Hydrostatic I Description (Optional): laced Component/Part/Appurtenance eplaced snubber on hanger 1MC1683-NV.04-R33 Pneumatic r" Nominal Operation Pressure FT Exempt FT Other I Pressure _ :_PSI Test Temp. _ :OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-03.Ol Support/Restraint Sketch/Drawing No(s).: I MCI 683-NV.04-R3-3 Sheet '2 of 2 System Class: ASME Class 2 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on N IS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 8 ,,20 Hi Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company ofýConnecticut have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Ins ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. Commissions NB11473-NC1524, N-Inspec-tor'sSignature .National Board, State, Province, and Endorsements Date r ?-I;. ,21
- 1. Owner 2. Plant Duke Energv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/6/20 11 Charlotte, NC, 28201 Sheet I of .2 I 526 South Church Street,....McGuire Nuclear Station Name 12700 Haiers Ferry Road, Huntersville, NC 28078 Unit I Address 3. Work Performed by Duke Energy Carolinas. LLC Name 1794908-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A....T "/A 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME II 1921 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MC1683-NV.01-R16 Duke Energy 20757 N/A N/A N/A Removed No 1lMC1683-NV.01-R16 Duke Energy 38444 N/A .. N/A N/A Installed No 7. Description of Work ReT Additional Description Re 8. Tests Conducted: Hydrostatic F Description (Optional): ,La.,IVu ý..,LLLJ.JVAI'Alu iOl.~fI~U LLLL eplaced snubber on hanger 1MC-1683-NV.0l-R16 Pneumatic F'Nominal Operation Pressure IF Exempt F Other F Pressure _ PSI Test Temp. OF
- 1. Owner 2. Plant..uk ....E-rv C.....na..
LI--FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/1/2011 Charlotte, NC, 28201 Sheet 1 of : 2 Duke Energv C olin L 526 South Church Street, Adduress McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville,-NC 28078 Address 3. Work Performed by Duke Eneray Carolinas, LLC Name 1922157-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: N/A N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System CF -Feedwater 5. (a) Applicable Construction Code ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped ComponentName of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-CF-402 Duke Energy 33791 N/A IN/A N/A Removed No I MCR-CF-402 Duke Energy 38451 N/A ":N/A N/A Installed No 7. Description of Work Rep Additional Description Re 8. Tests Conducted: Hydrostatic I Description (Optional): laced Component/Part/Appurtenance ~placed snubber on hanger I MCR-CF-402 Pneumatic " Nominal Operation Pressure F" Exempt F Other F Pressure PSI Test Temp.: OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 16 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1591-01.01 Support/Restraint Sketch/Drawing No(s).: 1MCR-CF-402 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist \Z Date October I -20 I1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period"/-2~,~ "2,7.Z .to -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthetrnore, neith he Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspec JF SwCommissions NBI1473-NC1524, N-I S Inspector's Signatul- -National Board. State, Province, and Endorsements Da e/ /DL -20//
- 1. Owner Duke Energy Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/20/2011 Charlotte, NC, 28201 Sheet I1 of 2 526 South Church Street, lAUUI~~2. Plant McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit I.1922362-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 192L Edition, Summer and Winter lition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM- IDuke Energy .22391 N/A N/A N/A Removed No 1MCA-SM-11 .Duke Energy 37890 N/A .N/A .N/A Installed No 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced snubber on hanger 1 MCA-SM -I11 8. Tests Conducted:
Hydrostatic r Description (Optional): Pneumatic r-Nominal Operation Pressure F" Exempt F Other F Pressure _ PSI Test Temp. 'F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 42 in. (nominal)Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCF .D- 1 593-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-SM- I I Sheet 2 :of 2 System Class: ASME Class 2 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date September 20 -, 20 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of-Connecticut have inspected the components described in this Owner's Report during the period.7z9._.2".//zto "L- ... and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or onnected with this inspection. JF SwanCommissions NBI 1473-NC 1524, N-I SInspector's Signature National Board, State, Province, and Endorsements DateQ. -' " ,20 IP
- 1. Owner 2. Plant Duke Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date 9/25/2011 Charlotte, NC, 28201 Sheet I of 2 526 South Church Street.A AA., McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit 1.1922368-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: 'N/A Authorization No.: :N/A Expiration Date: N/A 526 South Church Street. Charlotte.
NC 28201-1006 Address 4. Identification of System CA- Auxiliary Feedwater 5. (a) Applicable Construction Code ASME III 1971. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCA-CA-432 Duke Energy 20592 N/A :N/A N/A Removed No I MCA-CA-432 Duke Energy 38408 N/A N/A N/A Installed No 7. Description of Work Additional Description Revlaced Component/Part/Appurtenance Replaced snubber and it's bolting material on hanger IMCA-CA-432
- 8. Tests Conducted:
Hydrostatic 'Description (Optional): Pneumatic F Nominal Operation Pressure rI Exempt 5 Other F-Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1592-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-CA-432 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on N IS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Z. i,,.- Date September25 201L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by :Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period....l 2 7-...-/// ..... to 9 -2 & -//, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own, r's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspec n.JF Swan -. -Commissions NBI 1473-NC 1524, N-I inspector's Sig~turZ National Board. State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 C Date 10/1/2011 1. Owner 2. Plant Duke Enerqv Carolinas. LL 526 South Church Streetr Charlottea, NC 28201 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet I :of 2 Unit I 1922384-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System ýNV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 193_L Edition, Summer and Winter Addenda, :N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)MCR-1NV-943 Duke Energy 21522 N/A ýN/A N/A Removed No:MCR-1NV-943 Duke Energy 38411 N/A N/A N/A Installed No.. .... .. ... .i .... .I ..7. Description of Work Renlaced Comnonent/Part/Annurtenance Additional Description R 8. Tests Conducted: Hydrostatic F'Description (Optional):-placed snubber and it's bolting material on hanger MCR-1NV-943 Pneumatic r- Nominal Operation Pressure rI Exempt F Other fI Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMTY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-01.00 Support/Restraint Sketch/Drawing No(s).: MCR-INV-943 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 ý of'2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 1 , 20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Hartford Steam Boiler Inspection and Insurance Company of'North Carolina and employed by o[Connecticut have inspected the components described in this Owner's Report during the period 7 WL7- to Zz" Z.-- / and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' eport. Furthermore, neier the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r onnected with thiinsion. IFSwan -..-Conmmisions NBI 1473-NC1524, N-I Date.U Inspector's Signatur/r ID /0 National Board, State. Province, and Endorsements 20YL
- 1. Owner Duke 526 S 2. Plant 3. Work Performed by Energy Carolinas, LI outh Church Street.FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI CDate 8/8/2011 Charlotte, NC, 28201 Sheet? 1 of 2 Atd'ess McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas.
LLC Name 526 South Church Street, Charlotte, NC 28201-1006 Address Unit I.1922396-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME Iii 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM-103 Duke Energy 15827 N/A :N/A N/A Removed No:IMCA-SM-103 'Duke Energy 37568 N/A N/A N/A Installed No 1MCA-SM-103 'Duke Energy 16549 .N/A N/A Removed No 1MCA-SM-103 Duke Energy .38108 N/A N/A N/A Installed No.... .. .......... ... i .-............. ... .l : .... ...... ...........7. Description of Work Ret Additional Description Re 8. Tests Conducted: Hydrostatic F Description (Optional): ,laced Component/Part/Appurtenance eplaced snubbers on hanger I MCA-SM-1 03.Pneumatic F Nominal Operation Pressure FI Exempt F Other F7 Pressure_ PSI Test Temp. " -.OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 ý of 2 Component Line Size: 42 'in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1 593-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-SM- 103 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-003 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 8 ,2011.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION [, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North carolina ....and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period to &- /Z /,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. IJF Swan CIOo',d,-Lf-... ,, NBI 1473-NC1524, N-I Inspector's S Da .-ignaturý 1117 National Board, State, Province, and Endorsements 201/
- 1. Owner 2. Plant Duke Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMITY As Required by the Provisions of the ASME Code Section Xi LC Date 8/8/2011 Charlotte, NC, 28201 Sheet 1 of 2 Duke Energv Carolin L 526 South Church Street, I I A ....AddreSS McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Enemy Carolinas, LLC Name Unit I 3. Work Performed by 1922401-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: 'N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System SM -Main Steamr 5. (a)Applicable Construction Code ASME II1 197L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM-75 Duke Energy 176 N/A NN/A Removed No 1MCA-SM-75 Duke Energy 38106 N/A N/A N/A Installed No 1MCA-SM-75 Duke Energy 16033 ,N/A N/A N/A Removed No 1 MCA-SM-75 Duke Energy 38107 N/A IN/A 'N/A Installed No.... .... ' : ....... .... ...... ....~ ~~~~... ........ ... ....... ..... ................7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced snubbers on hanger 1 MCA-SM-75.
- 8. Tests Conducted:
Hydrostatic F Description (Optional): Pneumatic F Nominal Operation Pressure F Exempt P Other I-Pressure _ PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 42 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCFD-1593-01.03 Support/Restraint Sketch/Drawing No(s).: I MCA-SM-75 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-004 Sheet 2 of .2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed TL Grass, Quality Assurance Technical Specialist Date August 8 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:North Carolina .andemployed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period" -to L-( , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Insp tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. f iJF Swan 9 ,l 'Comrn isions NB 1473-NC 1524, N-I Date Inspectoes Signature National Board, State, Province, and Endorsements 20 _Z
- 1. Owner 2. Plant Duk ....~ Carolin.....
LI--FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI Date 9/28/2011 Charlotte, NC, 28201 Sheet 1 of 2 Duke Energv Carolin L 526 South Church Street. (A ,iino, McGuire Nuclear Station Name 12700 Halers Ferry Road4 Huntersville, NC 28078 Unit 1'1922405-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System :NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III .19.71, Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) }N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)iMCR-INV-966 Duke Energy 21513 N/A ..N/A N/A Removed No IMCR- 1NV-966 Duke Energy '38403 N/A N/A N/A Installed No k ~ ~ ~ ~ ~ ~ ... ... .. .. ....... ......... ...... ........ ...':!! .. ...... ..... ~~~~~~~.. .. ... .. ... ...... l ............. ................ ...... ......... ....... ---- ----.. --- .I.... ...... ... .. ........} ......... .......... ... .....-* ....... ...... ., ..... .. ....... ... ....... ... ..7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced snubber on hanger MCR- INV-966 8. Tests Conducted: Hydrostatic
- r. Pneumatic r Description (Optional):
Nominal Operation Pressure.. Exempt .OtherF Pressure !PSI Test Temp. O___F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: .2 "'in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: 'N/A Sheet 2 i of L2 Flow Diagram No(s).: ,MCFD-l1554-01.01 Support/Restraint Sketch/Drawing No(s).: IMCR-INV-966 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp :N/A Certificate of Authorization No. N/A Expiration Date ýN/A Signed fFL Grass, Quality Assurance Technical Specialist Date September 28 :, 201-Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period to :z2.izZ-,-'.toll -.. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspectio JF Swan -Commissions ýNBI 1473-NC1524, N-I/ Inspector's Signature National Board, State, Province, and Endorsements Dat ...._ _ __,20/
- 1. Owner 2. Plant flhlkA Pnprciv flnrnhinn!
II FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date .6/27/2011 Charlotte, NC, 28201 Sheet I of .2 Duke Enerav Carolinas L 526 South Church Street.(526 South Church Street AAA-McGuire Nuclear Station Name 12700 Hagers Ferry Road. Huntersville. NC 28078 Unit 1 1922412-01
- 3. Work Performed by Address Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System CF -Feedwater 5. (a) Applicable Construction Code ASME III 19 7U'- Edition,:
Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-CF-157 Duke Energy .15855 N/A N/A N/A Removed No IMCA-CF-157 Duke Energy 37883 N/A :N/A N/A Installed No 7. Description of Work Rev Additional Description rei 8. Tests Conducted: Hydrostatic f Description (Optional): ,laced Component/Part/Appurtenance placed snubber on hanger I MCA-CF- 157 Pneumatic r-Nominal Operation Pressure rT Exempt F Other F Pressure' PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 26 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-l591-01.01 Support/Restraint Sketch/Drawing No(s).: 1MCA-CF- 157 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-CFC-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X1.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist A Date June 27 ,20_1l Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period.to" -7 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither# Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspecti FCommissions NB 11473-NC 1524, N-I DNational Board, State, Province, and Endorsements
- 1. Owner 2. Plant fliik~ Fnpi-ov Cnrnlina'~
Ti FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMITY As Required by the Provisions of the ASME Code Section XI LC Date 9/20/2011 Charlotte, NC. 28201 Sheet i of .2 Duke Ener- C olinas L 526 South Church Street_AAA.McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922414-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: -N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME 111 19.71. Edition, 'Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s):N/A
- 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-SM-108
- Duke Energy 15857 N/A N/A N/A Removed No 1MCA-SM-108 Duke Energy 38450 N/A N/A N/A Installed No N/A Reoe No IMCA-SM-108 Duke Energy 19911 N/A N/A N/A Removed No:1MCA-SM-108 Duke Energy 37886 :N/A " N/A N/A Installed Yes 7. Description of Work Rep Additional Description Re 8. Tests Conducted:
Hydrostatic -Description (Optional): Ilaced Component/Part/Appurtenancesnubbers on hanger 1MCA-SM-108 Pneumatic -Nominal Operation Pressure F Exempt [ Other F Pressure __PSI Test Temp. O_°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 34 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of :2 Flow Diagram No(s).: MCFD- 1593-01.03 Support/Restraint Sketch/Drawing No(s).: ]1MCA-SM-108 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Date September 20 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period7.. T1// to 0 a6 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from/ connected with this inspection. JF Swan 42 z-r .I-, , y :*Commissions NBI 1473-NC 1524, N-I/ / Inspector's Signature' .1* National Board, State, Province, and Endorsements I FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 1. Owner Duke Energy Carolinas, LLC Date 9/30/2011 526 South Church Street, Charlotte, NC, 28201 Sheet 1 of 2 A S.hee I o 2. Plant McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit I 1922418-01
- 3. Work Performed by Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped p Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-BB-663
- Duke Energy 19540 N/A N/A N/A Removed N.o IMCR-BB-663 Duke Energy .38404 N/A N/A N/A Installed No 7. Description of Work Re Additional Description R 8. Tests Conducted:
Hydrostatic F Description (Optional):)laced Component/Part/Appurtenance eplaced snubber on hanger I MCR-BB-663 Pneumatic rT Nominal Operation Pressure F Exempt FF Other F Pressure. PSI Test Temp. _ ' FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: .2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-1580-01.00 Support/Restraint Sketch/Drawing No(s).: I MCR-BB-663 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-MC-i 190-BB.9.1 Applicablc Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X1.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist \j 42L. Date September 30 2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province ofýNorth Carolina and employed by :Hartford Steam Boiler Inspection and Insurance Company of NorthCaolinae-Connecticut .have inspected the components described in this Owner's Report during the period*.2--72.- 2L/."-.,/ ..to ' " , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Wpector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan (. -,Commissions NBI 1473-NC1524, N-I I/nspector's Signatu /National Board, State, Province, and Endorsements te0 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date I0/1/2011 1. Owner 2. Plant Duke Enerev Carolinas, LI... ...... .....r.h ..t ...t ..h ....... 1 & 28201...Address McGuire Nuclear Station Name 12700 Hagers Ferry R oad, Huntersville, NC 28078 Sheet I of 2 Unit I 1922422-01 Address 3. Work Performed by Duke Enermy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System Nv -'Chemical and Volume Control 5. (a) Applicable Construction Code ASME 111 1971 Edition, Summer and Winter Addenda, N/A Code Case.(b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)'IMCR-NV-1048 'Duke Energy 20492 N/A N/A N/A Removed No.IMCR-NV-1048 ,Duke Energy 38528 :NA N/A N/A Installed No ,. ..... .... .......... .... .....7. Description of Work Replaced Component/Part/Appurtenance Additional Description
- R 8. Tests Conducted:
Hydrostatic c Description (Optional):-placed snubber on hanger I MCR-NV- 1048 Pneumatic r Nominal Operation Pressure Exempt O Other F Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 3 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1554-01.02 Support/Restraint Sketch/Drawing No(s).: I MCR-NV- 1048 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements-of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October I 20 i1.Owner or Owner's Designee. Title .CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Hartford Steam Boiler Inspection and Insurance Company of.North Carolina and employed by o.Connecticut have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspection. JF Swan ]/Commissions NB 11473-NC 1524, N-I Inspector's Signature JNational Board. State, Province, and Endorsements/ ) /,20-L" " ..
- 1. Owner 2. Plant.uk... ..... Car li...... ."L I--FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I.C Date .10/3/2011 Charlotte, NC, 28201 Sheet I1 of 2 Duke Energv Carolin Ll 526 South Church Street, Address McGuire Nuclear Station Name Unit i 1922423-01 12700 Hapers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NC -Reactor Coolant 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 19 71. Edition, Summer and Winter lition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No):lMCR-NC-574 Duke Energy 20512 N/A ?N/A N/A Removed No T1MCR-NC-574 Duke Energy 38399 :N/A .N/A N/A Installed No.... ..... ........ ....... ........ ....I s 7. Description of Work Replaced Component/Part/Appurtenance Additional Description re 8. Tests Conducted:
Hydrostatic I Description (Optional): placed snubber on hanger I MCR-NC-574 Pneumatic r Nominal Operation Pressure F Exempt F7 Other r Pressure __ PSI Test Temp. O_°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: *2 in. (nominal)Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 System Class: ASME Class I Flow Diagram No(s).: MCFD-l 553-02.00 Support/Restraint Sketch/Drawing No(s).: iMCR-NC-574 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist 4 Date October 3 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed byHartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period"/ to- / "and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither th spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fryh or connected with this inspection IJF Swan(] 0 ' ',. .,. _..--- Commissions NBI 1473-NC1524, N-I D24(l Inspector's Signature / ' -National Board, State, Province, and Endorsements 201// FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 I. Owner 2. Plant Duke Enemyv Carolinas. LLC _526 South Church Street. Charlottea, NCt 2820 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Date 9/19/2011 Sheet I of 2 Unit I 1922427-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Reptucement Orgati7ition P.O. No.. Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME IIl 191L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-FW-121 Duke Energy 15118 N/A N/A N/A Removed N-2 IMCA-FW- 121 Duke Energy 37871 N/A N/A N/A Installed No 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced snubber on hanger IMCA-FW-121 -8. Tests Conducted: Hydrostatic F Description (Optional): Pneumatic F Nominal Operation Pressure F" Exempt F7 Other r-Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 24 in. (nominal)Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1571-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-FW-12 I Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data RePorts to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date September 19 ,201i 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of lConnecticut have inspected the components described in this Owner's Report during the period i 7'/L '- .-/ / to .and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective. measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injuty or property damage or a loss of any kind'arising from connected with this inspection. JF Swan -7Commissions NBI 1473-NC1524, N-I S Inspector's Signature National Board. State. Province. and Endorsements Date 9" 2Vi) 2071
- 1. Owner Duke 526 S 2. Plant 3. Work Performed by Energy Carolinas, LI outh Church Street, FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date '9/15/20 1 " Charlotte, NC, 28201 Sheet I of 2 Adoress McGuire Nuclear Station Name 12700 Hapers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit 1 1922428-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A".,TjA 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: i'j 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component of anufacturer Serial No. Board No. Identification Built Installed (Yes or No)1 MCA-ND-281 Duke Energy 14788 ::N/A ;N/A ýN/A i Removed No lMCA-ND-281 Duke Energy 38376 N/A N/A N/A Installed No IMCA-ND-281 Duke Energy :20735 N/A .N/A N/A Removed No IMCA-ND-281 Duke Energy .38377 N/A :N/A N/A Installed No 7. Description of Work Re Additional Description Ri 8. Tests Conducted:
Hydrostatic " Description (Optional): )]aced Component/Part/Appurtenance eplaced snubbers on hanger 1MCA-ND-281 Pneumatic r" Nominal Operation Pressure F" Exempt [ Other F Pressure _ PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 8 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-281 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 15 ,20 L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period'i'.-i to ,- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Ins ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o onnected with this inspection.,JF Swan ; -Commissions NB1 1473-NC 1524, N-I In lnsctors Signature National Board, State, Province, and Endorsements D /,t !9 2
- 1. Owner 2. Plant......... Ca-rol....
as. LI--FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 7/19/2011 Charlotte, NC, 28201 Sheet 1 of 2 Duke Energv Carolinas L 526 South Church Street.AAAr~~, McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922433-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street. Charlotte. NC 28201-1006 Address Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 197L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-297 Duke Energy 15697 N/A N/A N/A Removed No IMCA-ND-297
- Duke Energy 38099 N/A "'N/A N/A Installed No 7. Description of Work Rep Additional Description Re 8. Tests Conducted:
Hydrostatic I" Description (Optional): placed CosnuonhentPart/A1ourten-ance ~placed snubber on hanger I MCA-ND-297. Pneumatic F Nominal Operation Pressure rI Exempt F7 Other "" Pressure PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 12 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-ND-297 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist N'c .Date July19 1,20 IL Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period y....7i .. / ~to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own r's Report. Furthermore, neither the hspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising frof or connected with this inspection..IF Swa, '/ ..Commissions NBI 1473-NC 1524, N-I Inspector's Signature National Board. State, Province, and Endorsements Da&'20.1//I
- 1. Owner 2. Plant Duke Energy Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 9/19/2011 Charlotte, NC, 28201 Sheet of .2 Duke Ener2v Carolinas L 526 South Church Street, AuurIss McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte, NC 28201-1006 Address Unit I 3. Work Performed by'1922445-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME III 191L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-FW- 118 'Duke Energy 14752 N/A N/A N/A Removed No 1MCA-FW- 118 Duke Energy 37842 .N/A N/A N/A Installed No 7. Description of Work Rep Additional Description Re 8. Tests Conducted: Hydrostatic [7 Description (Optional):ComDonent/Part/Appurtenance eplaced snubber on hanger I MCA-FW- 118 Pneumatic [" Nominal Operation Pressure [7 Exempt P Other FI Pressure __PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 4 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 157 1-0 1.00 Support/Restraint Sketch/Drawing No(s).: IMCA-FW- 118 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist 4 ,zgt, Date :September 19 , 201l.l Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Nqorth Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company ofýConnecticut have inspected the components described in this Owner's Report during the period2 L~to ? // , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. IF Swan A ; Commissions nNB1 1473-NC1524, N-I Inspector's Signature '/Date9 National Board, State, Province, and Endorsements 20-L1
- 1. Owner 2. Plant Duke Enerav Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 19/8/2011 Charlotte, NC, 28201 Sheet 1 of 2 526 South Church Street, (/Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit I Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922446-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: :N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASMEIm 192L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) IN/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-FW-120
- Duke Energy 20666 N/A IN/A N/A Removed No IMCA-FW-120
- Duke Energy .38378 NA :N/A Installed N__o.. ..... .. i .. .. * ...*.. ..7. Description of Work Rep Additional Description Re 8. Tests Conducted:
Hydrostatic IF Description (Optional):)laced Component/Part/Appurtenance tplaced snubber on hanger IMCA-FW- 120 Pneumatic r" Nominal Operation Pressure F'Exempt FT Other Fr Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 4 in. (nominal)Weld Isometric Drawing No(s).: 'N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 157 1-0 1.00 Support/Restraint Sketch/Drawing No(s).: I MCA-FW-120 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 9 20 1 Owner or Owner's Designee, Title / " CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut have inspected the components described in this Owner's Report during the period to -,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Insp or nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fromI connected with this inspection..JF Swan I/jo -' .A- Commissinno NBI1473-NC1524, N-I Dateo Inspector's Signature d-q National Board. State, Province, and Endorsements 20-9 Date(" 7 2011
- 1. Owner 2. Plant Duke Enerey Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date :6/30/2011 Charlotte, NC, 28201 Sheet of 2 526 South Church Street, McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte, NC 28201-1006 Address Unit I 1922447-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 3. Work Performed by 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME III 197L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section X! Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-FW-126 Duke Energy 20804 'N/A IN/A N/A Removed No IMCA-FW-126 Duke Energy .37876 N/A :N/A N/A Installed No.... ., .. ........ .. ... ., ...... ... ......... ....... ... .... .. .. ..,, ...:. ... .7. Description of Work Ad Additional Description Re 8. Tests Conducted: Hydrostatic F Description (Optional): I New Component/Part/Appurtenance/Weldsnubber on hanger IMCA-FW-126. Pneumatic r Nominal Operation Pressure F'Exempt F Other r Pressure PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 24 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1571-0l .00 Support/Restraint Sketch/Drawing No(s).: IMCA-FW-126 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-FWA001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XL.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist N T Date June 30 ,20 1l Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of;North Carolina 'and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period 22=Z _Ztand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described i this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Ins ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising connected with this inspection. IIC IJF Swan (- '2-.9 .NB1I1473-NC 1524, N-I D- Inspector's Signature 2/ 0 -Date( / " 0.National Board, State, Province, and Endorsements
- 1. Owner 2. Plant Duke Energy Carolinas, L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date '7/12/2011 Charlotte, NC, 28201 Sheet I of 2 526 South Church Street, (A AA McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922449-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System FW -Refueling Water 5. (a) Applicable Construction Code ASME III 193L; Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No).1MCA-FW-160 Duke Energy 19552 N/A /A N/A Removed No IMCA-FW-160 Duke Energy 37874 N/A N/A N/A Installed N__IMCA-FW-160 Duke Energy 16541 N/A ýN/A N/A Removed No IMCA-FW-160 Duke Energy 37873 N/A :N/A N/A Installed No 7. Description of Work Re Additional Description Ri 8. Tests Conducted:
Hydrostatic F" Description (Optional): vlaced Component/Part/App~urtenance eplaced snubbers on hanger I MCA-FW-160 Pneumatic IF Nominal Operation Pressure F Exempt F Other r" Pressure PSI Test Temp. O 0 F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 24 in. (nominal)Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD-157l-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-FW- 160 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date 'N/A Signed FL Grass, Quality Assurance Technical Specialist --.i,2v Date July 12 ,2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of..North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut have inspected the components described in this Owner's Report during the period-.to T_! / R -i , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither thef pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection..JF Swan g[ 4Z,,Lt2... p- I Commi-inne% NB11473-NC 1524, N-I Inspector's Signatul Datd 7/-I 77w National Board, State, Province, and Endorsements __________________- ~1~~
- 1. Owner 2. Plant Duke Energy Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI L-C Date '7/21/2011 Charlotte, NC, 28201 Sheet .. of 2 526 South Church Street A AA....McGuire Nuclear Station Name 12700 Ha`4ere Ferry Road Huntersville.
NC 28078 Unit 1 11922451-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or RepairfReplacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: :'"'4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 19 71F Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) ;N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-NV-471 Duke Energy 21690 N/A ;N/A N/A Removed No 1MCA-NV-471 Duke Energy 38424 N/A N/A N/A Installed No MCA-V-47 N/ Installed .... ... .. .. ... ... ." * " i ..? ..- * : " .'.. ...' .i " ..." ... ." Z ..I " ..' ., .. .... ......... ... ......... .. ....7. Description of Work Rei Additional Description R 8. Tests Conducted: Hydrostatic I" Description (Optional): laced ComnonentlPart/Aonurtenance eplaced snubber and its bolting material on hanger I MCA-NV-471 Pneumatic r" Nominal Operation Pressure I Exempt F' Other F Pressure_ PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 _ in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1555-02.00 Support/Restraint Sketch/Drawing No(s).: IMCA-NV-471 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVD-003 Sheet 2 of" 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist t Date July 21 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut have inspected the components described in this Owner's Report during the period T zL2 -z/-.... :to ,7- -/ ./ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Insp tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan / ----,,.,.,-,- --Commissions NBI I473-NC1524, N-I Inspector' sSignature ' f National Board, State, Province, and Endorsements 20//! ei 2L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMITY As Required by the Provisions of the ASME Code Section X!Date 7/21/2011 1. Owner 2. Plant Duke Pner~v C~roIinn~ LI Duke Ener" Carolin L 526 South Church Streetr Charlotte, NC, 28201 Address McGuire Nuclear Station Name 12700 Hagers FerrY Road, l-untersville, NC 28078 Sheet I of 2 Unit I 1922452-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME Ill (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section Xl Code Case(s) N/A 6. Identification of Components 19 71 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-NV-5522 Duke Energy 20519 N/A N/A N/A Removed No IMCA-NV-5522 Duke Energy 38418 N/A N/A N/A Installed No 7. Description of Work Rep~laced Component/PartlADRrurtenance Additional Description Re 8. Tests Conducted: Hydrostatic [T Description (Optional): placed snubber and its bolting material on hanger 1 MCA-NV-5522 Pneumatic F-Nominal Operation Pressure Ir Exemp: F-Other I" Pressure PSI Test Temp. ° OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 3 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-l 555-02.00 Support/Restraint Sketch/Drawing No(s).: IMCA-NV-5522 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVS-004 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist
Date July 21 ,20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-/ to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's IReport. Furthermore, neither the Insp tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o onnected with this inspection." JF Swamn ,, A -------ommissions NBI'1473-NC1524, N-I INational Board, State, Province, and Endorsements Date 0 ,7 A- I,20-L
- 1. Owner 2. Plant fluke Fnerov C'~rnhit1R~
1.1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 7/19/2011 Charlotte, NC, 28201 Sheet 1 of 2 Duke Enerov Carolinas L 526 South Church Street_ I 526 South Church Street AAA McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville. NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922553-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME HII (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 192+/-_ Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yea or No)I MCA-NV-396 Duke Energy 21192 N/A N/A N/A Removed No IMCA-NV-396 Duke Energy 38076 N/A N/A N/A Installed No 7. Description of Work Replaced Coms nentbPart/Aimurtenance Additional Description
- 8. Tests Conducted:
Hydrostatic I-Description (Optional): placed snubber and its bolting material on hanger I MCA-NV-3 96.Pneumatic r-Nominal Operation Pressure F-Exempt F Other r- Pressure PSI Test Temp. °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal)Sheet 2 of 2 System Class: ASME Class 2 Weld Isometric Drawing NOWs): N/A Flow Diagram No(s).: MCFD- 1554-02.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NV-396 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 19 -20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period q -, ,- it to / -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his ployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Ins or nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspection. JF Swan Commissions .NB11473-NC1524, N-I-pector's Signature National Board. State, Province, and Endorsements Date -, 20._&
- 1. Owner Duke 526 S 2. Plant 3. Work Performed by Energy Carolinas, LI outh Church Street, FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/20/2011 Charlotte, NC, 28201 Sheet I of 2 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit 1 1922571-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 19.71 Edition, Summer and Winter Addenda, N/A 1998 Edition with the 1999 and 2000 Addenda Code Case 1998 Ed on wi the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM-185 Duke Energy 22428 N/A N/A N/A Removed No IMCA-SM-185 Duke Energy 37884 N/A N/A N/A Installed No 7. Description of Work Rei Additional Description Rt 8. Tests Conducted:
Hydrostatic F Description (Optional): placed Component/Part/Appurtenance eplaced snubber on hanger I MCA-SM- 185 Pneumatic F" Nominal Operation Pressure F Exempt [F Other F-Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 34 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1593-01.03 Support/Restraint Sketch/Drawing No(s).: 1MCA-SM-185 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist '-
- Date September 20 201_.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period--9 /Z to / and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro .r connected with this inspection.
JF Swan. F -Commissions NB11473-NC1524, N-1 Inspector's Signature /National Board, State, Province, and Endorsements Date 0 q -- / , 2 0J/
- 1. Owner 2. Plant Duke F.ner~vv Carolinas LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 7/25/2011 Charlotte, NC, 28201 Sheet 1 I of 2 Duke Enerov Carolinas L 526 South Church Street.A AA-, McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville.
NC 28078 Address 3. Work Performed by Duke Energy Carolinas. LLC Name 1922572-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Comn onents 191L Edition, Summer and Winter Addenda, N/A Code Case]iticon with the 1 QQQ anid 90A0 Adcepndn 1........ wit .... 199 and. 2000 ......da Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-SM-209 Duke Energy 15706 N/A .N/A N/A Removed No 1MCA-SM-209 Duke Energy 37882 N/A N/A N/A Installed No 7. Description of Work Replaced Component/Part/Appurtenance Additional Description Re 8. Tests Conducted: Hydrostatic r Description (Optional): placed snubber on hanger I MCA-SM-209 Pneumatic r-Nominal Operation Pressure r-Exempt Other rI Pressure.PSI Test Temp. O__ F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 42 -in. (nominal)Weld Isometric Drawing NOWs): N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 1593-01.-03 Support/Restraint Sketch/Drawing No(s).: 1MCA-SM-209 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-004 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ,- ,-ýDate July 25 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period I Z2. -// to -//, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector n his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne s Report. Furthermore, neither tl nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection Commissions ~~NBI1473-NC1524, N-I S Inspector's Signature" National Board. State, Province, and Endorsements Dar T-S2/ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC -Date 10/16/2011
- 1. Owner 2. Plant Duke Ener-av Carolinas LI 5 MthchuiarSre NuclearlStationC220 Address McGuire Nuclear Station Name 12700 H-agers Ferry Road, Huntersville, NC 28078 Sheet 1 of 2 Unit I 1930950-08 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street. Charlotte.
NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME IIll 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. AS ME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)INV498 ITT Grinnell 73-8013-8-1 WR2426 V File# 1046 1976 Installed Yes__ _ _ _ _I _ _ _ _ _ __I __ _ _ _ _I I___ _ [_ _ _ _ _ _ _ _ _ _ _1_7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced bonnet on valve INV498 per EC 102955.8. Tests Conducted: Hydrostatic r" Pneumatic r- Nominal Operation Pressure F Description (Optional): test performed per procedure MP/0/A/7700/045. Exempt f" Other F-Pressure PSI Test Temp. °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-INV1O Flow Diagram No(s).: MCFD- 1554-03.01 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No.. EC No.) if not included elsewhere on NIS-2 Form: EC 102955 Sheet 2 of 2 Apphcable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist 2S Date October 16 ,201-.1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period q- a7 -L to./ "7 -/ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the In pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o connected with this inspection. JF Swan .A-,,,.....- -Commissions NBI 1473-NC1524, N-i Y- Inspector's Sinature /A' National Board. State. Province. and Endorsements I FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/14/2011
- 1. Owner 2. Plant Duke Energy Carolinas.
LL Duke Ener2v Carolinas Ll 526 South Church Street Charlotte, NC. 28201 Address McGuire Nuclear Station Name 12700 Ha-gers Ferry Road, Huntersville, NC 28078 Sheet 1 of 2 Unit I 193095 1-14 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.), 11 ^A. ý ..... N/A"I'.Y AtU oriz y i n No.ll:p Authorization No.: 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: t~"r'4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME III 1921. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-BB-501 Duke Energy N/A N/A N/A N/A Installed No 7. Description of Work Additional Description Renlaced Component/Part/Appurtenance Modified hanger I MCR-BB-501 per EC 100651 8. Tests Conducted: Hydrostatic F" Description (Optional): Pneumatic F-Nominal Operation Pressure F" Exempt F Other -" Pressure PSI Test Temp. °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1580-01.00 Support/Restraint Sketch/Drawing No(s).: IMCR-BB-501 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC100651 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 14 ,20 II Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period/ to _,/Q t /7Z. ," , andstate that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Ins ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from onnected with this inspection. JF Swan/ 0 1-Commissions NBI 1473-NC 1524,N-I" Inspector's iSignature -National Board. State, Province, and Endorsements Da lb,_/ _7 20_&
- 1. Owner Duke Energy Carolinas, Li FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTMTY As Required by the Provisions of the ASME Code Section XI Date 10/14/2011 Charlotte, NC., 28201 Sheet -I of 2 526 South Church Street. 4 2. Plant 3. Work Performed by McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name unit 1 193095 1-18 Unit 1 1930951-18 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: e 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-BB-507 Duke Energy N/A N/A N/A N/A Installed No 7. Description of Work Re Additional Description W 8. tests Conducted:
Hydrostatic r Description (Optional): Rlaced Component/Part/Appurtenance 'orked hanger I MCR-BB-507 per EC 10065 1.Pneumatic F-Nominal Operation Pressure '-Exempt r- Other r-Pressure PSI Test Temp. _ O°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions or the ASME Code Section Xi 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1580-0 i.00 Support/Restraint Sketch/Drawing No(s).: 1MCR-BB-507 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC100651 Sheet 2 of 2 Applicable Manufacturer's Dam Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 14 )201 Owner or Owner's Designee. Title I I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period(n I to ZeD -Z /and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the lnsp tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan .Commissions NB 11473-NC 1524, N-I Inspector's Signature -National Board, State, Province, and Endorsements
- 1. Owner 2. Plant Duke Energy CarolinasLI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 9/28/2011 Charlotte, NC, 28201 Sheet 1 of '2 526 Smith church Street. 4 526 South Church Street AAA McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Roadý Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1948066-09 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street. Charlotte.
NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 19.7_L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Comnonents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)NV Piping Duke Energy N/A 37 N/A 1981 Installed Yes a a 4* 4 4 4 4 7. Description of Work Replaced Component/Part/Arrnurtenance Additional Description Ri 8. Tests Conducted: Hydrostatic " Description (Optional): eplaced bolting in flange I NVFE5300.Pneumatic r" Nominal Operation Pressure F Exempt r" Other F" Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Sheet 2 of 2 System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI-INV5 Flow Diagram No(s).: Mi CFD-1554-01.Ol Support/Restraint Sketch/Drawing No(s).: MCSRD-NVA Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 28 ,20 H_Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period Kr S -// -to IF- 2, _ // , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XT.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from 1 7 connected with this inspection. JF Swan/I .J-' ./1-7 NBI 1473-NC1524, N-I I .= = , ., J -- --D 4e Inspector's Signature f-/National Board, State, Province, and Endorsements D4 20120-LI
- 1. Owner 2. Plant Duke Energy Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date 10/3/2011 Charlotte, NC. 28201 Sheet I of 2 52t S~niith Church Sfreet 526 South Church Street McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville. NC 28078 Unit 1 1952310-49 Work Order # (or Repair/Replacement Organization PO. No., Job No., etc.)Address 3. Work Performed by Duke Energy Carolinas. LLC Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME IIl (b) Applicable Edition of Section Xl used for Repair/Replacement Activity 1998 Ed (c) Applicable Section Xi Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter Lition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NV-5609 Duke Energy 11003 N/A N/A N/A Removed No IMCA-NV-5609 Duke Energy 37068 N/A N/A N/A Installed No 7. Description of Work Additional Description Renlaced Comnonent/Part/Annurtenance Replaced snubber on hanger I MCA-NV-5609
- 8. Tests Conducted:
Hydrostatic F' Pneumatic F" Description (Optional): Nominal Operation Pressure '-Exempt fl Other F-Pressure PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-04.00 Support/Restraint Sketch/Drawing No(s).: I MCA-NV-5609 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 3 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period Sto. D , 4/-& and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. IF Swan 0 Commissions NB131473-NC 1524, N-I Inspector's Signature /ate National Board, State, Province, and Endorsements 201//
- 1. Owner 2. Plant fluik~ Fnerov Carolinas.
1.1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi LC -Date 10/5/2011 Charlotte, NC, 28201 Sheet I " of 2 Duke Enerov Carolinas L 526 South Church Street.(526 South Church Street, Address McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1952541-07 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street. Charlotte. NC 28201-1006 Address E~xpiration Date:..4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME Ill 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-NV- 1190 Duke Energy N/A N/A N/A N/A Installed No 7. Description of Work Ad.Additional Description Ri 8. Tests Conducted: Hydrostatic [T Description (Optional): d New Component/Part/Appurtenance/Weld eattached item# 2 (2 x 2 x 1/4 Tube Steel) to item# 1 (3 x 3 x 1/4 Tube Steel) on hanger 1MCR-NV- 1190.Pneumatic --Nominal Operation Pressure F" Exempt F Other F" Pressure PSI Test Temp. °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1554-01.02 Support/Restraint Sketch/Drawing No(s).: I MCR-NV- 1190 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist \'/,4, -Date October 5 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period/ ....-- to I -(o" /Z and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or nnected with this inspection. JF Swan = -Commissions NBI 1473-NC 1524, N-I SInspector's Signature National Board, State, Province, and Endorsements Date -2o0
- 1. Owner 2. Plant Duke Enery Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI tC Date 10/25/2011 Charlotte. NC, 28201 Sheet I of 2 I~96 ~nuth Church Street 526 South Church Street AAA McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Enermv Carolinas, LLC Name Unit i 1956492-03 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 3. Work Performed by 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System MNS -McGuire 5. (a) Applicable Construction Code ASME III 19971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built' Installed (Yes or No)MNS Duke Energy N/A 44 N/A 1981 Installed Yes 7. Description of Work Re Additional Description re 8. Tests Conducted: Hydrostatic F Description (Optional): v1aced Comp~onent/Part/Appurtenance placed bolting, material on penetrations M461I Pneumatic r Nominal Operation Pressure J7 Exempt F Other r" Pressure'PSI Test Temp. _ O_ F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 6 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: N/A Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Apphcablv Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 25 Y20 IlL Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION [, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 4o /c -/2..- -- / , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor hh' employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection. JF Swan ,Commissions NBI1473-NC1524, N-I-Inspector's Signature National Board. State. Province, and Endorsementsa ,
- 1. Owner 2. Plant fluke Fnerov Carohin~q.
11 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi LC Date 9/22/2011 Charlotte, NC, 28201 Sheet I of 2 Duke Enerov Carolinas L 526 South Church Street.A AA-., McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energry Carolinas, LLC Name 1956861-56 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street Charlotte. NC 28201-1006 Address 4. Identification of System CF -Feedwater 5. (a) Applicable Construction Code ASME 111 19271 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-CF-173 Duke Energy 00161 N/A N/A N/A Removed No IMCA-CF-173 Duke Energy 38103 N/A N/A :N/A Installed No 7. Description of Work Additional Description Replaced ComsbonentgPart/AMurtenance Replaced snubber on hanger I MCA-CF- 173 8. Tests Conducted: Hydrostatic F Description (Optional): Pneumatic r-Nominal Operation Pressure IT Exempt F' Other F" Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 18 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1591-01.0i Support/Restraint Sketch/Drawing No(s).: IMCA-CF-173 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X1.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist .Date September 22 ,20I__Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-.!- // -//. to -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan --Commissions NBI1473-NCI524, N-I-/I Inspector's Signature" National Board, State, Province, and Endorsements _/I FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/6/2011 1. Owner 2. Plant Duke Energy Carolinas. LI.Duke Energv Carolinas L 526 South Church Street Charlotte, NC, 28201 Address McGuire Nuclear Station Name 12700 Hap-ers Ferry Road, l-untersville, NC 28078 Sheet 1 of 2 Unit 1 1957052-02 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NC -Reactor Coolant 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Cornmonents 19271 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)SG D Lisega Snubber Duke Energy 7 N/A N/A N/A' Installed No 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced control valve in Lisega Snubber (SG-D)8. Tests Conducted: Hydrostatic F Pneumatic r-Description (Optional): Support for Steam Generator "D" Nominal Operation Pressure F Exempt W Other r" Pressure PSI Test Temp. _ F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIViTY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: N/A in. (nominal)Weld Isometric Drawing NOSsW.: N/A System Class: ASME Class 2 Flow Diagram No(s).: N/A Support/Restraint Sketch/Drawing No(s).: SG-D (07)other Applicable Information (e.g., W.O. No.. EC No.) if not included elsewhere on N IS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 6 .20 I!Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of have inspected the components described in this Owner's Report during the period Connecticut 9 .ZS -// to ID -9L.- & , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Ins ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from ed with this inspection. JF Swan _ I Commissions NBI 1473-NC 1524, N-I DateInspector's Signature Dt 2-/7 7 National Board. State, Province, and Endorsements 2o/__/I FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC -Date 12/1/2011 1. Owner 2. Plant Duke EnerM Carolinas. LI Duke Energy Carolinas, LI 526 South Church Street Charlotte, NCt 28201 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet 1 of 2 Unit I 1957 177-08 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A.26.S...h..h..ch.S.ree. Charl...e. NC 282. .-00 Address 4. Identification of System NC -Reactor Coolant 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)INCI Crosby N56925-00-0003 27 N/A 1974 Installed Yes INCI Crosby N56925-00-0004 28 N/A 1974 Removed Yes 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced valve INC I 8. Tests Conducted: Hydrostatic " Pneumatic -Nominal Operation Pressure FR E Description (Optional): Pressure test was performed in coniunction with the Class A walkdown.xempt -Other r Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 6 in. (nominal)Weld Isometric Drawing No(s).: MCFI-INC5 System Class: ASME Class I Flow Diagram No(s).: MCF Support/Restraint Sketch/Drawing No(s).: N/A~D- 155'3-02.00 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ---%4. Date December I ,20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period-I -a -Z / to 4ZC.: -. -Z-/i., and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective mesures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection. IF Swan ý f ,Commissions NBI 1473-NC 1524, N-I S Inspector's SignaturF ,-National Board, State, Province, and Endorsements D(1; 0ý r f 4R I',. C. FO S Y VA ALV E Ca OAQ .CO c Ikj, S, L. .2., /.:, 5'_ WR ENTHAM , MASS....FORM N- FOi SAFETY A; SAFETY RELIEF VALVES Q.As required by the Provisions of the ASME Code P.ules DATA REPORT XB-27 Safety and Safety Relief ValVes Vm,rn,,ctired Y Crosby Valve & Gatce Company, 43 KendrLck St., Wrentham, 'ass. 02093 616 HB-BP-86 Name and Address lcel .N-56925 Oider No. N-300560 Contract Date 2/12/73 Duke Power Company 2. Mar.ufictured For Charott.e, North C_9_olina Order N".. A-33957 Name and Address-. owner Duke Power Ccr-pany, 422 South Church St.. Charlotte, North Carolina 28201 Name and Address 4. Location of Plant McGuire Nuclear Stati.on Unit #I, Cowans Ford. North Carolina 5. Valve Identification 1-NC-3 serial No. N56925-00-0003 Drawing No. DS-C-56925 Rev. 0 2.154 Type Safety orifice Size M Pipe Size Inlet 6. Outlet 6 Safety.S:ifety Actuated Inch Inch Inch in, 1, 6. Set Pressure (PSIG) 24R5# 700 F.1 I I I Rated Teimper.,ure 3 r. Overp~ressure-3 Ijlnwdc~.n ui IsiG, 124 Stamped Capacity 420006#/hr. Ilydrostatic Test (PSIG) Inlet 4 575 Complete Valve 7. The material. design. construction and workmanship comply with ASME Code. Sectin; Ill.Class
- I Edition 1971 Addenda Date pressure Containin; o, Pressure Retaining Components" JV Winter 1972 a. Castings Body Bonnet b. Bar Stock and Foigings Support Rods Nozzle Disc Insert To Sprinr Washers Bottom Adjusting Bolt Spindle Spindle Ball Serial No.Identification N90397-31-0001.
N~90353-34-0014 H 9015~0-32-0029 N'90-151 0042 N90354-34-0019 N903,55-0019 Material Speclihatlon lncluding Type or Gr.,de ASTM A-351-72 Gr. CF8M ASME SA-351 Gr. CFS:. __AST7.I A-105-71 Gr. II ASME SA-1.05 Or. II-A.G~ HEF ASTMA-.S:105.7 Gr. 11______AS'XN A-19J-YO Nr B6 ASKL S-1.93 Cr. B6 __ASITM A-276-72 T)ypc 440 ASIM SA-276 TNvpt. 440 C I -/ C r P e, t7.Serial No. or Identification Material Spectric~cl 0 0 Including Type or Grade AS'lhW A-304' Cr. 57Jfei N-X-2761-0015 I.I ml.. O~ber Parts such as Pilot Components Di.c v!older N90356-35-0016 Inconel 718 ASTM A-I93-7i U.. B/lon-et Stud 87589 AS%.%: SA-193 (:r. 37 ASTM[ A:9-il G5.Bonnet Stud Nut 2 2371 AWE SA- 19.4 .r... ..SA Z .94 C We certify that the statements made in ibis report are correct.DLto -... V 19 SSigned .Crosby Valve& C o. "_ _ _ .... _ _ .QA 21fa ager Manufacturer Certificate of Authorization No. 331. expires __Jgvember, 9: 1974-.DESIGN ITOPM.IATION ON FILE AT CROSBY VALVE & GAGE COTA',ANY. DESIGN RUPORT NO. EC-158.CERrIFICATE OF SHOP INSPECTIOU. I. the undersigned. holdirng a. alid commission issued by the National Board of Boiler a3rd.Pressiute Vessel Inspcc'.ors arý_ the State or Province of .and employed by Mutual Boiler & :lachirlerv Insurancc Co..'.. have] tha,,,. I. e inspected the'equipmentL descr&bed in this Da.- Report on - and state chat to the best of my knot.'ledge and belief..the himnuticturerI hIas constructed hliti equip, ment in accordance with the apZýicable Subsections of A,\S. Section IlI.By signiog this cPitificate. iteither the Inspector nor hIs enqployer
- naks any wa'.ran:V.
e-pressed or implied. concerning
- -e equtipment described in this Data Report.Furthec..nore.
neth;tt the Inspe"ccot nor his employer .%,ail be liable in any mainer for any .personal injury or, pruperty damage or a loss of any kind 2r---sing frcin or connected with this inspection.
- Factory Mutual Group of Insurance Co.Date -$:19-.---Cmissions AI/Co 7.. """ (I{spector) " ,,;atio lllar l -. Provi-nce .r1 ., 1 .
- 1. Owner 2. Plant Duke Pner~v Carnlinaq LI FORM NIS-2 OWNER'S REPORT FOR REPATI/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1C Date 10/7/2011 Charlotte, NC, 28201 Sheet I of 2 Duke Enerow Carolin L 526 South Church Street. (526~ , Sot hrhSre McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit I 02002923-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Address 3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street_ Charlotte.
NC 28201-1006 526 South Chu h Street- Ch lotte NC 28201-1006 Address Expiration Date: L- /" 4. Identification of System NV -Chemical And Volume Control 5. (a) Applicable Construction Code ASME IHl 1921. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Corn onents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)Valve I NV-810 Kerotest E9-16 7529 N/A 1975 Corrected Yes______________________________________________ A. A. -.1. L 1. A.7. Description of Work Oth Additional Description Se 8. Tests Conducted: Hydrostatic r Description (Optional): er (Describe Below)al welded body to bonnet on valve INV-810 Pneumatic F Nominal Operation Pressure F Exempt F7 Other F Pressure*PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: MCFI-INV-25 Flow Diagram No(s).: MCFD-1554-01-00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCM-1205.01-0032-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed F. R. Sorrow, QA Tech. Support Date 10-7 ,20 1l Owner or Owner's s'signee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period--/(/ to /0 7L , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspection. JF Swan r ; =y-- _..ej,-Commissions N1l1473-NC1524,N-I INational Board, State, Province. and Endorsements Date /D -7 , 20_& FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 10/10/2011
- 1. Owner 2. Plant Duke Energv Carolinas L 526 South Church Street, Charlotte, NC, 28201 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet I of 2 Unit 1 2002923-06
- 3. Work Performed by Address Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte, NC 28201-1006 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4. Identification of System NV -Chemical And Volume Control 5. (a) Applicable Construction Code ASME III 192L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Com onents_Corrected, ASME Code Nampeof Manufacturer National Other Year Removed, or Stamped Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCR-NV-848 Duke Energy N/A N/A N/A N/A Installed No 7. Description of Work Additional Description Re 8. Tests Conducted:
Hydrostatic -Description (Optional): ,ia..,u '..UIhILPVLLtIA tJ al Uniij. U.- Ia QL-L tplaced item 2 (1 x I x 1/4 angle) on hanger IMCR-NV-848. Pneumatic r-Nominal Operation Pressure " Exempt F Other r Pressure PSI Test Temp. __.°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1554-01.00 Support/Restraint Sketch/Drawing No(s).: I MCR-NV-848 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2_____Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ,.Date October 10 _ 20 I1 Owner or Owner's Designee. Title I CERTiFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 7 --// to " and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither th spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection JF Swan Commissions NB11473-.NC1524, N-I-Inspector's Signature t National Board, State, Province, and Endorsements Daote/ /0 -0 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/12/2011
- 1. Owner 2. Plant Duke Enerv Carolinas, LI 526 ~nisth Chi~rch street Charlotte NC. 28201 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road. Huntersville, NC 28078 Sheet 1 of 2 Unit I 2004055-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Address 3. Work Performed by Duke Enerv Carolinas, LLC Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 N/A Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME [II (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Com onents 19 71 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)NV Piping Duke Energy N/A 37 N/A 1981 Installed Yes 7. Description of Work Additional Description Weld Repar Base metal repair at hanger I MCR-NV- 10591.8. Tests Conducted:
Hydrostatic " Description (Optional): Pneumatic r" Nominal Operation Pressure F Exempt r- Other r- Pressure.PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: MCFI-INV45 Flow Diagram No(s).: MCFD- 1554-01.02 Support/Restraint Sketch/Drawing No(s).: iMCR-NV-1059 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NV-04 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist .Date October I , 20 1 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period.to Z -0 /and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne's Report. Furthermore, neither the In ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection. 'JF Swan -10 )'.At /. 6-f"7. .---- /'nmmiscinn. NBI1473-NC1524, N-I Inspector's Signature Date (5& -/National Board. State. Province. and Endorsements 201/
- 1. Owner 2. Plant fliike~ Pne~rov Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XT LC Date 10/15/2011 Charlotte, NC. 28201 Sheet I of 2 Duke Enerow Carolinas Ll 526 South Church Street A AA- ,.McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit I 2004926-21 Address 3. Work Performed by Duke Energy Carolinas. LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System WL -Liquid Waste Recycle System 5. (a) Applicable Construction Code ASME III 1927 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)WL Piping Duke Energy N/A 29 N/A 1981 Installed Yes 7. Description of Work Additional Description Replaced Component/Part/Aw purtenance Replaced piping and welds per EC 106925 8. Tests Conducted: Hydrostatic F Pneumatic F Nominal Operation Pressure S1 Description (Optional): test performed per procedure MP/0/A/7650/076. Exempt F Other F Pressure 15 PSI Test Temp. 78 6F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 6 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: MCF1-W8 Flow Diagram No(s).: MCF Support/Restraint Sketch/Drawing No(s).: N/A D-1 565-07.00 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC106925 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ,,,,,,,, Date October 15 20IL Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period---, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o onnected with this inspection JF Swan ;"f / Commissions NBl 1473-NC1524, N-d f Inspector's Signature ý tr National Board, State. Province, and Endorsements Date 02-L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI C Date 10/14/2011
- 1. Owner 2. Plant Duke Energy Carolinas.
LL Duke Energ-v Carolinas LL 526 South Church Streer Charlotte, NC. 28201 Address McGuire Nuclear Station Name 12700 Hagers Ferr' Road, Huntersville, NC 28078 Sheet I of 2 Unit I 2005281-15 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street Charlotte NC 28201-1006 Address 4. Identification of System WL -Liquid Waste Recycle System 5. (a) Applicable Construction Code ASME III 191L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Com onents_Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-WL-785 Duke Energy N/A N/A N/A N/A Installed No 7. Description of Work Replaced Component/Part/Apourtenance Additional Description H 8. Tests Conducted: Hydrostatic -Description (Optional): inger I MCR-WL-785 worked per EC 106925.Pneumatic r-Nominal Operation Pressure --Exempt F Other F'Pressure.PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 6 in. (nominal)Weld Isometric Drawing No(s).: MCRFI-IWL84 System Class: ASME Class 2 Flow Diagram No(s).: N/A Support/Restraint Sketch/Drawing No(s).: 1MCR-WL-785 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC106925 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Date October 14 _ 20 .H Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period/&5 /C -// to IC "7-// ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner'% Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspectio.JF Swan Commissions NBI 1473-NC 1524, N-I Inspector's Signature
- National Board. State. Province, and Endorsements Date le -1'7 2 Wno- ,,, I
- 1. Owner 2. Plant Duke Enermv Carolinas, LL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/15/2011 Charlotte.
NC, 28201 Sheet 1 of 2 526 South Church Street AA McGuire Nuclear Station Name 12700 Hagers Ferry Road. Huntersville, NC 28078 Unit I Address 3. Work Performed by Duke Ener.y Carolinas, LLC Name 2005296-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NC -Reactor Coolant 5. (a) Applicable Construction Code ASME 11 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section Xl Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-NC-769 Duke Energy 16601 N/A N/A N/A Removed No I MCR-NC-769 Duke Energy 38529 N/A N/A N/A Installed No 7. Description of Work Re, Additional Description R4 8. Tests Conducted: Hydrostatic " Description (Optional): vlaced Comnionient/Part/Appurteniance eplaced snubber on hanger IMCR-NC-769 Pneumatic F" Nominal Operation Pressure r Exempt F Other F Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 4 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class I Flow Diagram No(s).: N/A Support/Restraint Sketch/Drawing No(s).: IMCR-NC-769 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicahie Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date October 15 ,20 L Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period/n- 9 --! -Y and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Insp ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection..F Swan Commissions NB!1473-NC1524, N-I uNational Board, State. Province, and Endorsements 6.0 Pressure Testing There is (1) Class 1 (Category B-P) pressure test zone that requires pressure testing each refueling outage. Table 6-1 shows a completion status of the Class 1 (Category B-P) pressure test zone conducted during refueling cycle EOC 21.Table 6-1 Class 1 Pressure Test Comoletion Listina EOC 21 EOC 21 VT-2 Zone Completion Examination Code Case(s)Number Boundary Dwg(s) Status Date Used 1NC-070L-A MC-ISIL-1553-01.00 Complete 10/14/2011 N-566-2 MC-ISIL-1553-02.00 MC-ISIL-1553-02.01 MC-ISIL-1554-01.00 MC-ISIL-1554-01.01 MC-ISIL-1554-01.02 MC-ISIL-1561-01.00 MC-ISIL-1562-01.00 MC-ISIL-1562-02.00 MC-ISIL-1562-02.01 MC-ISIL-1562-03.00 MC-ISIL-1562-03.01 There are two zones for the (67) Risk Informed Segments (Category R-A) that are required to receive a pressure test each refueling outage. Zone 1 NC-070L-A contains the Class 1 Risk Informed Segments and Zone IRI-001L-B contains the Class 2 Risk Informed Segments. Table 6-2 shows a completion status of the (66 out of 67) Risk Informed Segments pressure tested during refueling cycle EOC 21. Segment NV-109 was not pressure tested during EOC21 due to the pump being out of service (reference PIP M-1 1-08692). The pump will be pressure tested during the 1st quarter of 2012 and the results reported in the EOC22 Summary Report.Table 6-2 Risk Informed Pressure Test Completion Listing EOC 21 Code Zone Segment Completion EOC 21 Case(s)Number Boundary Dwg(s) Number Status VT-2 Date Used 1 1NC-070L-A MC-ISIL-1553-01.00 NC-18 Complete 10/14/2011 N-566-2 2 MC-ISIL-1553-02.00 NC-19 3 MC-ISIL-1554-01.00 NC-20 4 MC-ISIL-1554-01.01 NC-21 5 MC-ISIL-1562-01.00 NC-23 6 NC-86 7 NC-89 8 NC-90 9 NC-054 10 NC-055 11 NC-056 12 NV-033A 13 NV-033B Outage 7/EOC 21 McGuire Unit 1 Section 6 -Third Ten-Year Interval Page 1 of 6 Revision 0 January 5, 2012 Table 6-2 Risk Informed Pressure Test Completion Listing EOC 21 Code Zone Segment Completion EOC 21 Case(s)Number Boundary Dwg(s) Number Status VT-2 Date Used 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 NV-034A NV-034B NV-037 NV-038 NV-041A NV-041 B NV-042A NV-042B NV-030A NV-030B NV-032A NV-032B NV-035 NV-036 NV-039A NV-039B NV-040A NV-040B NI-068 NI-069 NI-070 NI-071 4 4 4 9 .0.1 RI-001 L-B MC-ISIL-1554-01.00 MC-ISIL-1554-01.01 MC-ISIL-1554-01.02 MC-ISIL-1554-01.03 MC-ISIL-1554-03.00 MC-ISIL-1554-03.01 MC-ISIL-1562-01.00 MC-ISIL-1562-03.00 NV-020H NV-020F NV-020GA NV-020AD NV-020B NV-020CA NV-020D NV-020EA NV-01 9AA NV-019B NV-019D NV-020AB NV-020AC NV-021A NV-021 B NV-002AB NV-002D NV-019C NV-019E NV-028 NV-029 NV-026 Complete (except Segment NVI 09)10/14/2011 None Outage 7/EOC 21 McGuire Unit I Section 6 -Third Ten-Year Interval Page 2 of 6 Revision 0 January 5, 2012 Table 6-2 Risk Informed Pressure Test Completion Listing EOC 21 Code Zone Segment Completion EOC 21 Case(s)Number Boundary Dwg(s) Number Status VT-2 Date Used 58 NV-027 59 NV-080A 60 NV-080B 61 NV-084A 62 NV-084B 63 NV-084C 64 NV-002C 65 NV-1 08A 66 NV-109 Incomplete 67 NV-011A There are (30) Class 2 (Category C-H) pressure test zones that require pressure testing once each Inspection Period. Table 6-3 shows a completion status of the (30) Class 2 (Category C-H) pressure tests zones that require pressure testing for the Third Period of the Third Ten-Year Interval. The Third Period began on 12/01/08 and will extend to 04/01/2012. The completion status for Zone 1 NV-045L-B will be documented in the EOC22 Summary Report.Table 6-3 Class 2 -3rd Period Completion Listing VT-2 Zone Examination Code Cases Number Boundary Dwg Completion Status Date Used 1 1BB-096L-B MC-ISIL-1580-01.00 Complete 11/10/2011 None 2 1BB-098L-B MC-ISIL-1572-03.00 Complete 10/14/2011 None MC-ISIL-1580-01.00 MC-ISIL-1584-01.00 3 1CA-006L-B MC-ISIL-1592-01.00 Complete 10/14/2011 None 4 ICA-032L-B MC-ISIL-1584-01.00 Complete 11/10/2011 None MC-ISIL-1591-01.01 MC-ISIL-1592-01.00 MC-ISIL-1617-01.00 5 1FW-027L-B MC-ISIL-1554-03.00 Complete 08/24/2011 None MC-ISIL-1554-03.01 MC-ISIL-1561-01.00 MC-ISIL-1562-03.00 MC-ISIL-1563-01.00 MC-ISIL-1571-01.00 Outage 7/EOC 21 McGuire Unit 1 Section 6 -Third Ten-Year Interval Page 3 of 6 Revision 0 January 5, 2012 Table 6-3 Class 2 -3rd Period Completion Listing VT-2 Zone Examination Code Cases Number Boundary Dwg Completion Status Date Used 6 1ND-019L-B MC-ISIL-1554-01.02 Complete 11/11/2011 N-533-1 MC-ISIL-1561-01.00 N-566-2 MC-ISIL-1562-03.00 MC-ISIL-1562-03.01 MC-ISIL-1563-01.00 MC-ISIL-1571-01.00 MC-ISIL-1572-01.00 7 1ND-050L-B MC-ISIL-1561-01.00 Complete 08/31/2011 N-566-2 MC-ISIL-1562-03.01 MC-ISIL-1563-01.00 8 1NI-021L-B MC-ISIL-1562-02.00 Complete 4/14/2010 None MC-ISIL-1562-02.01 MC-ISIL-1572-01.01 9 1NI-022L-B MC-ISIL-1562-03.00 Complete 11/21/2011 None MC-ISIL-1562-03.01 10 1NI-039L-B MC-ISIL-1562-03.01 Complete 3/19/2010 None 11 INI-053L-B MC-ISIL-1562-03.00 Complete 11/21/2011 None 12 1 NI-060L-B MC-ISIL-1562-02.01 Complete 4/10/2010 None MC-ISIL-1562-03.00 13 1NI-071L-B MC-ISIL-1562-01.00 Complete 09/23/2011 N-566-2 14 1NI-074L-B MC-ISIL-1562-03.00 Complete 11/21/2011 None 15 1NM-046L-B MC-ISIL-1572-01.01 Complete 10/13/2011 None 16 1NS-023L-B MC-ISIL-1563-01.00 Complete 08/18/2011 None 17 1 NS-024L-B MC-ISIL-1563-01.00 Complete 11/21/2011 None Outage 7/EOC 21 McGuire Unit 1 Section 6 -Third Ten-Year Interval Page 4 of 6 Revision 0 January 5, 2012 Table 6.3 Class 2 -3rd Period Completion Listing VT-2 Zone Examination Code Cases Number Boundary Dwg Completion Status Date Used 18 INV-016L-B MC-ISIL-1554-01.00 Complete 10/07/2011 None MC-ISIL-1554-01.01 MC-ISIL-1554-01.02 MC-ISIL-1554-02.00 MC-ISIL-1554-02.01 MC-ISIL-1554-03.00 MC-ISIL-1554-03.01 MC-ISIL-1554-05.00 MC-ISIL-1561-01.00 MC-ISIL-1562-01.00 MC-ISIL-1562-03.00 19 INV-017L-B MC-ISIL-1554-01.00 Complete 11/10/2011 None MC-ISIL-1554-01.01 MC-ISIL-1554-01.02 MC-ISIL-1554-01.03 20 1NV-018L-B MC-ISIL-1554-01.02 Complete 11/10/2011 None 21 INV-020L-B MC-ISIL-1554-01.02 Complete 4/13/2010 None 22 1NV-045L-B MC-ISIL-1554-03.00 Incomplete N/A None 23 1NV-051L-B MC-ISIL-1554-03.01 Complete 08/26/2011 None 24 iRN-004L-B MC-ISIL-1574-04.00 Complete 1011212011 None 25 1 RV-002L-B MC-ISIL-1604-03.00 Complete 10/06/2011 None 26 1SA-035L-B MC-ISIL-1593-01.02 Complete 08/17/2011 None 27 ISM-006L-B MC-ISIL-1572-03.00 Complete 11/10/2011 None MC-ISIL-1591-01.01 MC-ISIL-1593-01.00 MC-ISIL-1593-01.03 Outage 7/EOC 21 McGuire Unit I Section 6 -Third Ten-Year Interval Page 5 of 6 Revision 0 January 5, 2012 Table 6-3 Class 2- 3rd Period Completion Listing VT-2 Zone Examination Code Cases Number Boundary Dwg Completion Status Date Used 28 1SM-036L-B MC-ISIL-1593-01.00 Complete 11110/2011 None MC-ISIL-1593-01.02 MC-ISIL-1593-01.03 29 ISM-037L-B MC-ISIL-1593-01.00 Complete 11/10/2011 None MC-ISIL-1593-01.03 30 IYA-043L-B MC-ISIL-1617-01.00 Complete 11/16/2011 None Section 6 Prepared By: Date: Section 6 Reviewew By: Date: Section 6 Approved By: Date: Outage 7/EOC 21 McGuire Unit i Section 6 -Third Ten-Year Interval Page 6 of 6 Revision 0 January 5, 2012 7.0 Containment Inservice Inspection (IWE)Inservice inspections of Class MC components are performed in accordance with the ASME Boiler and Pressure Vessel Code, Section XI, Subsection IWE, 1998 Edition with the 2000 Addenda. Article IWA-6000, Records And Reports, paragraph IWA-6210, requires the Owner to prepare inservice inspection summary reports for inservice inspections performed on Class 1 and 2 pressure retaining components and their supports.IWA-6000 does not address inservice inspection summary reports for Class MC pressure retaining components and their supports, and the Code does not require preparation and submittal of summary reports for Class MC components. As such, Section 7.0 of this Summary Report does not contain information specified in IWA-6220 or IWA-6230.Section 7.0 of this report contains only that information applicable to Code Class MC components, as required by 10 CFR 50.55a(b)(2)(ix)(A), which states: "The applicant or licensee shall evaluate the acceptability of inaccessible areas when conditions exist in accessible areas that could indicate the presence of or result in degradation to such inaccessible areas. For each inaccessible area identified for evaluation, the applicant or licensee shall provide the following in the ISI Summary Report as required by IWA-6000: (i) A description of the type and estimated extent of degradation, and the conditions that led to the degradation;(ii) An evaluation of each area, and the result of the evaluation, and;(iii) A description of necessary corrective actions.General Visual Examinations were performed on accessible surfaces of the Steel Containment Vessel during refueling outage 1EOC21 in accordance with the ASME Code, Section XI, IWE-2500, Table IWE-2500-1, Examination Category E-A, Item El.11.During this inspection, conditions were observed that were deemed to be reportable per 10 CFR 50.55a(b)(2)(ix)(A). The observed conditions and the information required by 10 CFR 50.55a(b)(2)(ix)(A) are provided below.Description of the Type of Degradation: Location of Indication Pipe Chase floor and containment vessel insulation panel/floor interface below the Unit 1 Fuel Transfer Tube near azimuth 2400 -2700, Elev. 725.Description of Indication: Standing water, boric acid deposits and staining were observed on the Pipe Chase Floor and the base of the stainless steel insulation panel covering the bottom portion of the Steel Containment Vessel interior surface. Although there was no direct indication of containment vessel degradation in this area, degradation of the Steel Containment Vessel shell plate behind the insulation panel could not be readily confirmed by the General Visual Examination. Because the Steel Containment Vessel is not accessible for visual examination at this location, the condition of the Steel Containment Vessel shell behind the insulation panel and concrete could not be readily determined. Outage 7/EOC 21 Page 1 of 3 McGuire Unit 1 Revision 0 Section 7 -Containment Inservice Inspection (IWE) Information January 12, 2012 Problem Investigation Process Report PIP #M-1 1-06962 was written, in part, to address this problem.Estimated Extent of Degradation and Conditions That Led to the Degradation: Based on inspections and evaluations documented below, Duke Energy does not believe that the conditions identified in this report have resulted in actual degradation of the Steel Containment Vessel shell plate behind the insulation and concrete floor interface at this location.The source of borated water has not been determined. However, the observed conditions are likely the result of one or more of the following:
- 1. Melting Ice from the Ice Condenser.
Melting ice from the Ice Condenser is a possible source of the borated water due to unexpected elevated ice condenser temperatures that occurred on 9/20/11 (Reference PIP #M-1 1-6842). It should be noted that the moisture barrier directly above the fuel transfer tube did not show evidence of conditions that would allow moisture to access the Steel Containment Vessel shell plate, but melting ice water could have drained onto the Pipe Chase Floor.2. Rain Water in the Equipment Hatch.It is possible for rain water to enter through the Equipment Hatch, into the VX Fan Pit, and into lower containment through the divider barrier drains. When the Equipment Hatch is opened, water drains into lower ice condenser area (Reference PIP #M-1 1-6980). Rainwater drainage would follow a similar flow path as ice condenser leakage, but would not contain boric acid.3. Decontamination "washdown" activities. Water may have accessed this area during decontamination activities, but would not contain boric acid.Evaluation of the Affected Area and Results of the Evaluation: To confirm that the observed conditions had not resulted in degradation to inaccessible surfaces of the Steel Containment Vessel, the following actions were taken and completed during refueling outage 1EOC21: 1. Portions of the stainless steel insulation panel (and foamglass insulation) and Pipe Chase floor concrete (along approximately 6 inches at the base of the Steel Containment Vessel to a depth of approximately 1") were removed, and a direct visual examination (VT-1) of the interior surfaces of the Steel Containment Vessel were performed in this area. Ultrasonic thickness readings were also taken at this location to confirm the actual thickness of the shell plate. The VT-1 examination revealed some coatings degradation and minor surface rusting, but the condition of the shell plate was considered to be acceptable. No corrosion was observed beneath the interior concrete floor embedment zone interface. UT exams detected thicknesses consistent with the 1" nominal shell plate thickness (1.008", 1.009", and 1.014").2. Ultrasonic thickness measurements were also performed from the exterior side of the Steel Containment Vessel at ten locations (near the floor elevation) to determine whether general corrosion was occurring at other locations behind the insulation Outage 7/EOC 21 Page 2 of 3 McGuire Unit 1 Revision 0 Section 7 -Containment Inservice Inspection (IWE) Information January 12, 2012 panel where the panel had not been removed on the interior of the Steel Containment Vessel in the Fuel Transfer Tube area. These UT thickness readings ranged from 1.007" to 1.014" and are consistent with the 1" nominal shell plate thickness. Because the VT-1 examinations and UT measurements indicated no significant metal loss on the Steel Containment Vessel shell plate, the condition of the Containment Vessel is considered acceptable at this time.Description of Necessary Corrective Actions 1. The foamglass insulation was replaced and the stainless steel panel was reinstalled in accordance with design drawings during refueling outage 1 EOC21.2. Moisture barrier material (sealant) was reinstalled along the base of the insulation panel to protect against any future moisture intrusion.
- 3. The McGuire Containment ISI Plan shall be revised to add examination of the affected area in accordance with the ASME Code, Section XI, IWE-2500, Examination Category E-C, Item E4. 11 (from the interior surface) and Item E4.12 (from the exterior surface)during the next inspection period, as required by IWE-2420.4. McGuire Engineering shall evaluate the feasibility of implementing one or more of the following actions during refueling outage I EOC22: a. Remove the bottom 6" of the insulation panel and foamglass insulation (as necessary) to clean and recoat surfaces of the Steel Containment Vessel shell plate at the Pipe Chase concrete floor embedment zone interface beneath the Fuel Transfer Tube. Restore foamglass insulation and stainless steel insulation panel, and replace/restore moisture barrier (sealant) at the base of the insulation panel at the Pipe Chase floor.b. Remove the entire insulation panel and portions of the foamglass insulation (as necessary) beneath the Fuel Transfer Tube, clean and recoat surfaces of the Steel Containment Vessel shell plate at the Pipe Chase concrete floor embedment zone interface.
Install new moisture barrier (sealant) at the containment vessel shell embedment zone interface, then restore foamglass insulation and stainless steel insulation panel, and replace/restore moisture barrier (sealant) at the base of the insulation panel at the Pipe Chase floor.c. Install multiple inspection ports at the base of the insulation panel at the Pipe Chase floor to enable visual examination of the containment vessel shell/embedment zone interface at various locations around the periphery of the Pipe Chase and revise the Containment ISI Plan to include examination of these locations. Outage 7/EOC 21 Page 3 of 3 McGuire Unit 1 Revision 0 Section 7 -Containment Inservice Inspection (IWE) Information January 12, 2012 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVTY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 16 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: :N/A Flow Diagram No(s).: MCFD-1591-01.Ol Support/Restraint Sketch/Drawing No(s).: I MCR-CF-403 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 1 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:qorth Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period-to : Z and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspectio JF Swan / -;_ Commissions .NBI 1473-NC 1524, N-I Insp~ctor's Signature--,/'7" .National Board, State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 1.5 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-02.00 Support/Restraint Sketch/Drawing No(s).: 1MC-I 683-NV.0 I-Ri 6 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: N/A Sheet 2 of: 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X[.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 6 :, 2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of:Hartford Steam Boiler Inspection and Insurance Company of'North Carolina and employed by o Connecticut .... ... .......Connecticut_ have inspected the components described in this Owner's Report during the period-t , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the In ctor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. --,Commissions NBI 1473-NC 1524, N-I Inspcto's SgnaureNational Board, State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1. Owner Duke Energy Carolinas_.LLC ........... .. Date 5/19/2011 526 South Church Street, Charlotte,. 2&2_01 .. Sheet 1 of2 2 Address 2. Plant McGuire Nuclear Station Unit I Name 12700 HBagers Road, HNutesvil!_NC 28078 Address 3. Work Performed by Duke Energy Carolinas LLC_Name 526 South Church Street,.Charlotte, NC 28201-1006 Address 1794910-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity .1998. Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-SM-104 Duke Energy 15835 N/A N/A N/A Removed No IMCA-SM-104 Duke Energy 38104 N/A N/A N/A Installed No 4 4- 4 4 4 4 9. .. ..........
- 4. 1 .. 4 7. Description of Work ReplacedCQomponent Additional Description Replaced snubber on 8. Tests Conducted:
Hydrostatic F Pneumatic -Description (Optional): /Part/Appureinance ihanger IMCA-SM-104. Nominal Operation Pressure F Exempt F Other F'Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 42 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1593-01.03 Support/Restraint Sketch/Drawing No(s).: IMCA-SM- 104 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-SMA-003 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date May 19 ,20 1L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of!:North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Conniecticut have inspected the components described in this Owner's Report during the period.5 --"-16 / to "ý ,- --and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector no his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither t ýý-nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fron r connected with this inspectio IJF Swan " Commissions NB11473-NC1524, N-I Inspector's Signat ",,/ " National Board, State, Province, and Endorsements 20//
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!Duke Energy Carolinas, L C Date .8/31/2010 526 South Church Street. CharlotteNC.
28201 -........... ...... .Sheet 1 of 2 Address McGuire Nuclear Station Unit I Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy CarolinaLLC..-. Name 526 South Church Street,_Charlotte, NC 28201-1006 Address.1794913-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME HIl 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity _1_998-E-dition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-286 Duke Energy 15869 N/A N/A N/A Removed No IMCA-ND-286 Duke Energy .37218 N/A N/A N/A Installed No 7. Description of Work iv..pna1..u1k k,.AVlfl.JfVIirllLJA at urI " I..JJ.U. Additional Description rei 8. Tests Conducted: Hydrostatic F Description (Optional): laced snubber on hanger I MCA-ND-286. Pneumatic FT Nominal Operation Pressure rT Exempt Other r" Pressure___PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 -in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1561-0 1.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-286 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 31 ,2010 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.Connecticut have inspected the components described in this Owner's Report during the period-to. 3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Insp or nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection."JF Swan r- -Commissions NC 1524, N-I Inspector's Signature " National Board, State, Province, and Endorsements Date/ ,3' /" ,2.; FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As .Required by the Provisions of the ASME Code Section XI I. Owner Duke Energy Carolinas,_LLC ......-.Date 8/19/2010 526 South Church Street. Charlotte. NC. 28201 ._^_ 1 ^2. Plant Address McGuire Nuclear Station Name 12700 Ha ers Ferry Road, Huntersville,,______ ___ S11eL 01I___Unit _NC 28078 .1794915-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and -Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-298 Duke Energy .22181 N/A N/A N/A Removed No*IMCA-ND-298 Duke Energy .37597 .N/A N/A N/A Installed No 7. Description of Work Additional Description Replaced COMIponentlPart/A~ppurtenac replaced snubber and bolting material on hanger I MCA-ND-298
- 8. Tests Conducted:
Hydrostatic F Pneumatic r Description (Optional): Nominal Operation Pressure F Exempt F Other F" Pressure _____PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 1561-0 1.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-298 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-006 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist " Date August, 19 ,20 10 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period--_to 0149L_ _ _,_and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's eport. Furthermore, neither the i spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or onnected with this inspection. JF Swan -Commissions NC1524, N-I SInspector's Signature National Board, State, Province, and Endorsements Date ? 26XL
- 1. Owner 2. Plant Duke Pner~v Carnlina~
VT FORM NIS-2 OWNER'S REPORT FOR REPAIRJREPLACEMENT ACTMTY As Required by the Provisions of the ASME Code Section XI LC Date 9/2/2010 Charlotte, NC, 28201 Sheet i of 2 526 South Church Street Address McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name.1794916-01 Work Order 9 (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: :N/A Authorization No: N/A 526 South Church Street, Charlotte, NC 2820 1-1006 N/A Address Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 19 711 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition, with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-290 Duke Energy T21526 N/A *:N/A N/A Removed No MCA-ND-290 'Duke Energy .38071 N/A ýN/A :N/A Installed No 7. Description of Work Additional Description Re 8. Tests Conducted: Hydrostatic FT Description (Optional):)laced Component/Part/AppIurtenance.placed snubber on hanger 1 MCA-ND-290. Pneumatic r" Nominal Operation Pressure F Exempt f Other F Pressure, PSI Test Temp. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 12 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: :MCFD- 1561-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-290 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ,." , Date September 2 -, 20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period 9 2 M .to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither t Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from/f connected with this inspection JF Swan Commi sions NC1524, N-i g Inspec Date;tor's Signature .National Board, State, Province, and Endorsements 20/aýD
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI DukeEnergy Carol inas,- -----.. .. .... ... .... ...Date 8/31/2010 526 South Church Street, Charlotte 28201_. .... Sheet i 2 Address McGuire Nuclear Station Unit .1 Name 127l00Hagqs HunteFrsville.
NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name:1794917-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A..'M/A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: ...4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 19 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-287 Duke Energy 20507 N/A .N/A N/A Removed No 1MCA-ND-287 Duke Energy .37858 N/A .N/A. N/A Installe-d No 7. Description of Work Re Additional Description re 8. Tests Conducted: Hydrostatic F'Description (Optional):)laced Component/Part/Appurtenance placed snubber on hanger I MCA-ND-287. Pneumatic r" Nominal Operation Pressure r" Exempt R Other F Pressure ____PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: S in. (nominal)Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-01.0 Sheet 2 of .2 System Class: ASME Class 2 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-287 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-002 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 31 ,20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period I? [0 -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section X1.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither th Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection JF Swan Commissions NC1524, N-1 r S r National Board, State, Province, and Endorsements Date ________ _ 201 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI!. Owner __ Duk e g a n L-- --.- --.. ..............- -...... ... .. Date 8/30/2010 526 South Church Street._Charotte,.N, 28201 ............... Sheet I of 2 Address 2. Plant McGuire Nuclear Station Unit I Name 12.7_0_._agerFerry..ad_, ntersv1e,NC M28078 Address Du keEnergyCar!n_ _LLN C ...Name 3. Work Performed by 1794919-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street, Charlotte,. NC 28201-1 006 Address Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME Ill 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-275 Duke Energy 21086 N/A N/A N/A Removed No IMCA-ND-275 Duke Energy .37859 N/A N/A N/A Installed No 7. Description of Work Re_Additional Description re 8. Tests Conducted: Hydrostatic F" Description (Optional): lated _Comonent/Part/Appurtenanc)laced snubber on hanger IMCA-ND-275. Pneumatic F Nominal Operation Pressure F'Exempt F Other r'Pressure.PSI Test Temp. _ °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASMEClass 2 Flow Diagram No(s).: MCFD- 156 1 -0 1.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-275 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X1.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist '
- Date August 30 ,201O_Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period*-" a -Z0 to -- 'Q, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection.
I .Commissions NC 1524, N-I/ Inspector's Signature National Board, State, Province, and Endorsements Da6/ . FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 1. Owner Duke Enrgy.Carolinas.i, L__LC_ ............... ............ Date 8/30/2010_.526_SouthChurch Street.. Charlotte. NC, 282_9_ ..-......... Sheet 1 of 2 Address 2. Plant McGuire Nuclear Station Unit I Name 12700 Hagrs Ferryo7d8 Huntersille,.XQ8078 Address 3. Work Performed by Duke Ene rgyCarolinas, LLC Name:1794920-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A 526 South Church Street._h.airLotte, NC 28201-1006 N/A Address Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped -, Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCA-ND- 181 Duke Energy 20738 N/A N/A N/A Removed No IMCA-ND-181 Duke Energy 38060 N/A N/A N/A Installed No 7. Description of Work ReI Additional Description re.8. Tests Conducted: Hydrostatic F Description (Optional): 1aqed Co _mp on enUn/Paprt.Appu enance placed snubber on hanger IMCA-ND- 181.Pneumatic F Nominal Operation Pressure r" Exempt P Other F'Pressure. .PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal) System Class: ASME*Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: I MCA-ND- 181 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDB-002 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist .Date August 30 -20 0 Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period* --- /c9 to -.3 L -. !Dand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne's Report. Furthermore, neither the I pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising froor connected with this inspection. JF SwanV2- o-ý ..-i.. Commisinno .NC1524, N-I S Inspector's Date 3-Signaturl National Board, State, Province, and Endorsements 204/a
- 1. Owner 2. Plant Duke E..EnerCgy.Carol inas,.LI 52.6. SouthChurch Skeeet,.Address McGuirre-Nuclea.
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC ... .._. ...- .... ..... .. D ate 9/2/2010 Charlotte. NC, 28201 ....Sheet I of 2 Station Unit I Name 1270Q HagureFerryRoad, Huntersville, NC 28078, Address 3. Work Performed by Duke Energy Caro!inras, LLC Name 526. South Church CharlotteNC 2820_1-1-006. Address 1794925-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity .1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-270 Duke Energy 16565 N/A N/A N/A Removed No IMCA-ND-270 Duke Energy 38052 N/A N/A N/A Installed No 7. Description of Work Replaced Component/Part/Appurtenance Additional Description Re 8. Tests Conducted: Hydrostatic r Description (Optional): placed snubber and bolting material on hanger I MCA-ND-270. Pneumatic F Nominal Operation Pressure r" Exempt F Other r-Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XT 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal)System Class: ASMEMClass 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-01 .00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-270 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist c -" -Date September 2 ,00__Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina A I- -,, Hartford Steam Boiler Inspection and Insurance Company r Connecticut have inspected the components described in this Owner's Report during the period to 9- 9 ( , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fron r connected with this inspe.JF Swan ' a, -Commisinno NC 1524, N-I....... (Inspect Date or's Signature /National Board, State, Province, and Endorsements FORM NIS-2 OWNER'S REPORT FOR REPAIR/EPLACEMENT ACTIVTY As Required by the Provisions of the ASME Code Section XI LC Date 9/20/2011 1. Owner 2. Plant Duke Enerav Carolinas. LI I 526 South Church Street, Charlotte, NC, 28201 Address McGuire Nuclear Station Name 12700 Hapers Ferry Road, Huntersville, NC 28078 Sheet I of 2 Unit 1 1794935-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte. NC 28201-1006 Address 4. Identification of System SM -Main Steam 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter[ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCA-SM- 182 Duke Energy 19913 N/A N/A N/A Removed No 1MCA-SM-182 Duke Energy 38112 N/A N/A N/A Installed No 7. Description of Work Additional Description Replaced CMnronent/Part/ApMurtenance Replaced snubber on hanger I MCA-SM- 182 8. Tests Conducted: Hydrostatic r Description (Optional): Pneumatic r Nominal Operation Pressure r Exempt 7l Other r Pressure PSI Test Temp. _°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 34 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1593-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-SM- 182 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September 20 ,2021-1 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 7" ..2ZP7 ". / to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan ,- -Commissions NB11473-NC1524, N-I A Inspector's Signature Board, State, Province, and Endorsements Data t ,20/
- 1. Owner 2. Plant FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI Duke Energy Carolinas.
LLC .. ....... ... ... .....Date 8/30/2010.5.26 South Church Street,. Charlotte, NC,. 28201 _ -*.Sheet I of 2 Address McGuire Nuclear .Station Unit I Name 12700 Hagers Fe .Road, _Huntersvil e, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church Street, Charlotte NC 28201-10.Q_6_ Address 1794939-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc,)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME IIl 19 7L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the. 1.999._and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, AS ME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-273 Duke Energy .21189 N/A N/A N/A Removed No IMCA-ND-273 Duke Energy 37222 N/A N/A N/A Installed No 7. Description of Work Rel Additional Description re 8. Tests Conducted: Hydrostatic F Description (Optional): ilaced Component/Part/Appurteniance placed snubber on hanger I1MCA-ND-273. Pneumatic r Nominal Operation Pressure r Exempt F" Other F Pressure-PSI Test Temp. _ FORM NIS-2 OWN ER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 8 in. (nominal) System Class: ASME Class2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1561-01.00 Support/Restraint Sketch/Drawing No(s).: IMCA-ND-273 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-002 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date August 30 ,2010 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 5ý- L-sL- 16 to -2L/-, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising froA or connected with this inspection. JF Swan , E -.- -- .Commissions NC 1524, N-I Inspector's Signatur National Board, State, Province, and Endorsements FORM NIS-2 OWNER'S REPOI As Required by the I 1. Owner Duke EnergCaroinas, LLC 52_6 SouthChurch .Street. CharlotteNC 28201 Address 2. Plant McGuire Nuclear Station Name 12700 Ha feryR o __untersyiJle NC 28078.Address 3. Work Performed by Duke EnpergyCarolinas_,LLC Name 526 South.ChurchStreet. CQhajLott(. NC 2820_1.- 1006 Address'T FOR REPAIR/REPLACEMENT ACTIVITY provisions of the ASME Code Section Xi....... .......... Date 7/13/2010 Sheet I of 2 Unit I 1794941-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System CF- Feedwater 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed. or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-CF-201 Duke Energy 20436 N/A N/A N/A Removed No I MCA-CF-201 Duke Energy 37231 N/A N/A N/A Installed No 7. Description of Work Rep Additional Description Re 8. Tests Conducted: Hydrostatic F Description (Optional): laced .Comlonent!Part/A ppurtenance placed snubber on hanger I MCA-CF-201 Pneumatic r- Nominal Operation Pressure r Exempt F Other r-Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 18 in. (nominal) System Class: ASMEClasso2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-1591-01.01 Support/Restraint Sketch/Drawing No(s).: IMCA-CF-201 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-CFC-012 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 13 ,20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period Lrz.17- -/Z0 to # and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Own0r's Report. Furthermore, neither tr nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro// or connected with this inspection JF Swan U-, X,_ Crommisinns NC1524. N-I inspector's Signatudre -/iat J I7- ý-2 National Board, State, Province, and Endorsements 20-Lo I. Owner 2. Plant Duke Enpergy.Carolinas_. 526 South Church Street.Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI_C .Date 7/13/2010 Charlotte, NC. 28201 .. ..... .Sheet 1 of 2 Station Unit !Name 12700 Hagers. Eerry Rpa4d Huntersville NC.28078 Address 3. Work Performed by Duke Energy Carglinwa, LLC Name 526 South Church StreetLChariotte. NC 28201-1 0.06.Address 1794942-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4. Identification of System CF- Feedwater 5. (a) Applicable Construction Code ASME III 19.1 Edition, Summer and Winter Addenda, 'N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 199Edition with. the 1999-and 2000 Addenda.(c) Applicable Section XI Code Case(s) N/A 6. Identification of Com onents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-CF-201 Duke Energy 22362 N/A N/A N/A Removed No 1MCA-CF-201 Duke Energy 37221 N/A N/A N/A Installed No 7. Description of Work Additional Description R~z-ke iace4Component/Prit/AAPPurte~nance Replaced snubber on hanger I MCA-CF-201I
- 8. Tests Conducted:
Hydrostatic -Pneumatic J" Description (Optional): Nominal Operation Pressure --Exempt F" Other r" Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 18 in. (nominal) System Class: ASME .Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1591-01.01 Support/Restraint Sketch/Drawing No(s).: IMCA-CF-201 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on N IS-2 Form: MCSRD-CFC-012 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date July 1310 Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-'7- 7-/O)to _-16ý12 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne s Report. Furthermore, neither the I spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro ,r connected with this inspection. iF Swan Y Commissions NC1524, N-I Inspector's Signature National Board, State, Province, and Endorsements I
- 1. Owner 2. Plant fluke I~neivv Carolinas U FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI£C Date 7/15/2010 Charlotte, NC. 28201 Sheet I of 2 Duke En fyv C olinas L 526 South Church Street.A AA McGuire Nuclear Station Name Unit I 1794967-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Enery Carolinas, LLC Name Type Code Symbol Stamp: Authorization No.: Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped ComponentName of Manufturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NV-498 Duke Energy 21407 N/A N/A N/A Removed No I MCA-NV-498 -Duke Energy 37853 N/A N/A N/A Installed No 7. Description of Work Rel Additional Description Re 8. Tests Conducted:
Hydrostatic -Description (Optional): ilaced Component/Part/Aonpurtenance eplaced snubber and it's bolting material on hanger 1 MCA-NV-498 Pneumatic F Nominal Operation Pressure F Exempt F Other F Pressure PSI Test Temp. _OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions ofthe ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal)SystemClass: ASMEClass2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-I 554-03.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-NV-498 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVK-002 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist c 'j " Date July 15 ,20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-" U to 2 -/i5L'Z'and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective. measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector r his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from oflkonnected with this inspection. JF Swan U L , ./? .C. -e--..-.4 rnmiminne NC1524 N-I Inspector's Signature ODate 7 , 20L0 National Board, State., Province, and Endorsements
- 1. Owner 2. Plant Duke Energy Carolinas, LI 526 South Church Street, Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!C .Date 5/4/2011 Charlotte, NC, 28201 Sheet I of .2.Station Unit 1.Name.12700 .Hagers Ferry.oad,.HIuntersville,.
NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South. Church.Street,. Charlotte, _NC 28201-10.0.6 Address 1794990-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the. 1999and 2000. Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component of Manucturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-271 Duke Energy 17997 N/A N/A N/A Removed No IMCA-ND-271 Duke Energy 38387 N/A N/A N/A Installed No 7. Description of Work Replaced Component/Part!Appurtenance Additional Description R 8. Tests Conducted: Hydrostatic F Description (Optional): eplaced snubber on hanger I MCA-ND-271I Pneumatic I-Nominal Operation Pressure F Exempt F Other F Pressure PSI Test Temp. _ I°F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions or the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class.2 Flow Diagram No(s).: MCFD- 1561-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-ND-271 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-006 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , Date May 4 ,201L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period;-'- Z/j to -S-- 5-- // , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro/. or connected with this ins ction.JF Swan -,-r ^- 12 :;---l -, Commissinns NBI1473-NC1524, N-I 6K Date Inspector's Signaiu National Board, State. Province, and Endorsements 20o/-- w ,j
- 1. Owner 2. Plant Duke Energy Carolinas, L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/25/2011 Charlotte, NC, 28201 Sheet I of 2 526 South Church Street. (A AA...McGuire Nuclear Station Name 12700. Hagers Ferry Road, Huntersville, NC 28078 Unit I 1810883-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System NI -Safety Injection 5. (a) Applicable Construction Code ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Comp onents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1NI-19 Flowserve ADFI-1 1 5698 V File# 380 1975 Corrected Yes 7. Description of Work Add New Component/Part/Aopurtenance/Weld Additional Description Se 8. Tests Conducted:
Hydrostatic r Description (Optional): al weld cover to body of valve INI- 19.Pneumatic -" Nominal Operation Pressure F Exempt r- Other F- Pressure _ PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 1 1/2 in. (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: MCFi IN149 Flow Diagram No(s).: MCFD-1562-01.00 Support/Restraint Sketch/Drawing No(s).: MCSRD-NI-13 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCM 1205.01-0031.001 & MC-1414-09.20-00 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist M- .... Date September 25 20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of.ConnecticutA ,_._-,_,,_ __ _have inspected the components described in this Owner's Report during the period-,./Ito ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspect.JF Swan[ ]Commissions NB11473-NC1524, N-I National Board, State, Province, and Endorsements DatC -Z- 20 I I. Owner 2. Plant fluke Pnerov (~rn1in~tq 1.1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xi AC Date 9/25/2011 Charlotte, NC, 28201 Sheet I of 2 Duke En ov Carolin Ll 526 South Church Street.526 South Church St et-Address McGuire Nuclear Station Name 12700 Hapers Ferry Road, Huntersville, NC 28078 Unit I 1810884-01 Address 3. Work Performed by Duke Energy Carolinas. LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street. Charlotte, NC 28201-1006 Address 4. Identification of System NI -Safety Injection 5. (a) Applicable Construction Code ASME III 19271 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)INI-17 Flowserve ADFI-9 5720 V File# 387 1975 Corrected Yes 1 4. 4 4 4 4 8 4 4 4. + 4 4 4 4 4. .t 4. 4 4 4 1 4. 4 4. 1 4. 1 a .. .5. 1 .5. 5 7. Description of Work Adi Additional Description Se 8. Tests Conducted: Hydrostatic -Description (Optional): 1 New Component/Part/Appurtenance/Weld al weld cover to body of valve INi-17.Pneumatic r Nominal Operation Pressure F-'Exempt r Other r Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 1 1/2 in. (nominal) System Class: ASME Class I Weld Isometric Drawing No(s).: MCFI IN164 Flow Diagram No(s).: MCFD-1562-01.00 Support/Restraint Sketch/Drawing No(s).: MCSRD-NI-14 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCM 1205.01-0031.001 & MC-1414-09.20-00 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist .Date September 25 20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period`7 - Z to -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JFCommissions NB 1473-NC 1524, N-I I"lnspector's Signature .1-1/ National Board, State, Province, and Endorsements I
- 1. Owner 2. Plant fluke Fner~v Cnrnlinas IA FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI bC -Date 9/25/2011 Charlotte, NC, 28201 Sheet I of 2 Duke Energv C olin L 526 South Church Street.Address McGuire Nuclear Station Name 12700 Hazers Ferry Road. Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Unit 1 1810887-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NI -Safety Injection 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1921_ Edition, Summer and Winter Addenda, N/A Code Case ition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)INI-347 Flowserve ADFI-14 5701 V File# 380 1975 Corrected Yes 7. Description of Work Ad4 Additional Description Se 8. Tests Conducted:
Hydrostatic F Description (Optional): d New Component/Part/Appurtenance/Weld al weld cover to body of valve IN 1-347.Pneumatic F Nominal Operation Pressure F Exempt r Other F Pressure PSI Test Temp. _OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions ofthe ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet.2 of 2 Component Line Size: I 1/2 in. (nominal) System Class: ASME Class 1 Weld Isometric Drawing No(s).: MCFI 1N164 Flow Diagram No(s).: MCFD-i562-01.00 Support/Restraint Sketch/Drawing No(s).: MCSRD-NI-14 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCM 1205.01-0031.001 & MC-1414-09.20-00 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September25 _,201L Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period..ii. ~/( , -to --o and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither th spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan K-,- --.-Commissions NBI1473-NC1524, N-IInspector's Signature "f National Board, State, Province, and Endorsements Date ~ ~ 602 /
- 1. Owner Duke Energv Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 10/10/2011 Charlotte, NC. 28201 Sheet I of .2 526 South Church Street, (2. Plant McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke EnervY Carolinas, LLC Name 1857897-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 2820 1-1006 Address 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction Code -1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Cornponent Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1NS36 Kerotest FW8-14 6730 V File# 514 1975 Installed Yes 7. Description of Work Additional Description
- 8. Tests Conducted:
Hydrostatic Description (Optional): Replaced Component/PartlAppurtenance Replaced disc in valve 1NS36.Pneumatic F-Nominal Operation Pressure F'7 Exempt r- Other F" Pressure PSI Test Temp. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: MCFI-INS42 Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD-I 56-3-01.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 10 ,2011_._Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period.&-L.3 t" ... .to &./L_ 1L -//-/ .., and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitherA Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspecti Commissions NBI 1473-NC1524, N-I/ ] Inspector's Signature,,-00National Board. State, Province, and Endorsements DateU / -/ ,20.d FORM NIS-2 OWNER'S REPORT FOR REPATRIREPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/11/2011
- 1. Owner 2. Plant Duke Enerv Carolinas.
LI 526 South Church Street, Charlotte, NC, 28201 Address McGuire Nuclear Station N'amie 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet I of 2 Unit 1 1864150-23 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Address 3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address N/A 4. Identification of System RN -Nuclear Service Water 5. (a) Applicable Construction Code ASME 1I1 I 971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)RN Piping Duke Energy N/A 36 N/A 1981 Installed Yes 7. Description of Work Additional Description Replaced Component/Part/Appurtenance
- 8. Tests Conducted:
Hydrostatic F Pneumatic F Nominal Operation Pressure f" Description (Optional): Test performed per procedure MP/0/A/7650/076). Exempt F Other F Pressure 90.5 PSI Test Temp. 95.2 oF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1574-04.00 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: EC99750 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section X1.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 11 ,20 11.Owner or Owner's Designee, Title CERTI FICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period!-- )6-./'/ to "-/ --1.3 A/I/, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectio JF Swar-, 'Commissions .NBI 1473-NC1524, N-I Inspector's Signature .National Board, State, Province, and Endorsements Dat .20/4---w FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl LC Date 10/14/2011
- 1. Owner 2. Plant Duke Ener"v Carolina.
.L1 I 526 South Church Street, Charlotte, NC. 28201 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet 1 of 2 Unit 1 1867772-03 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street Charlotte, NC 28201-1006 Address 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction Code ASME I.. 1971. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Cornponents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1NS64 'Kerotest OM15-1 .12514 N/A 1976 Installed Yes J.+7. Description of Work Additional Description Replaced Comp ient/Part/AvNurtenance Replaced disc in valve I1NS64.8. Tests Conducted: Hydrostatic 17 Pneumatic F Nominal Operation Pressure F Description (Optional): test performed per procedure MP/0/A/7700/045. Exempt " Other " Pressure PSI Test Temp. _ OF FORM N1S-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal)System Class- ASME Class 2 Weld Isometric Drawing No(s).: MCF-I1N543) Flow Diagram No(s).: MCFD- 1563-01.00 SupportfRestraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -FL Grass, Quality Assurance Technical Specialist Date October 14 2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by.:Hartford Steam Boiler Inspection and Insurance Company of::Connecticut have inspected the components described in this Owner's Report during the period 2i --.. to Z. -Zi / ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne 's Report. Furthermore, neither the spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fror br connected with this inspection. JF Swan ( ,.7 /7 / &)--,- Commissions NBI1473-NC1524, N-IýDatea -Inspector's Signature zo -Z7 National Board, State, Province, and Endorsements 20&!Date~~j. 20//
- 1. Owner 2. Plant flida~ Fn~r~~v Cs'erolinac 1.1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/5/2011 Charlotte, NC, 28201 Sheet I of 2 Duke En-v Carolinas L 526 South Church Street.526 South Church Street Address McGuire Nuclear Station Name Unit I1 12700 Haaers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1878522-20 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 SmithChurch ddressCaltt.N 82110 Address 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971 Edition, Summer and Winter Addenda, N/A Code Case lition with the 1999 and 2000 Addenda L ition with the 1999 and 2000 Addenda Corrected, ASME Code Namenof Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-333 Duke Energy N/A N/A N/A N/A Corrected No* 1* 1- 1* F 4~ F F 4. I& I. 4* 4. 4 1 I 4. 4. 4. I 4 I 7. Description of Work Replaced Component/Part/Appurtenance Additional Description R(8. Tests Conducted:
Hydrostatic r Description (Optional): eplaced pipe clamp on hanger IMCA-ND-333 due to operator change out on valve INDI5.Pneumaticr-Nominal Operation Pressure F Exempt P- Other r Pressure PSI Test Temp. _IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 8 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-01.00 Support/Restraint Sketch/Drawing No(s).: 1MCA-ND-333 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NDA-001 Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -C Date October 5 ,20!I1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period q-- _0 -I I to / , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the I pector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. IF Swan -Commissions NB11473-NC1524, N-I SInspector's Signature National Board. State, Province, and Endorsements Date 0 -,20L
- 1. Owner 2. Plant.Duke Energi C:arolinas,, L 526 South Church Street._Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI L-C. ... Date 6/24/2010_Charo.tteNC,_2201........
....... Sheet I of 2 Station Unit 1.Name 3. Work Performed by.27.00 -agrs Ferr o uteryile,.NC 28078 Address Duke Energ.Carolina__L.L .Name 526 South Church StreeeL Charlotte. NC 28201-1006 Address 1892748-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 4. Identification of System SV -Main Steam Vent to Atmosphere
- 5. (a) Applicable Construction Code ASME I1 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addends (c) Applicable Section XI Code Case(s) N/A 6. Identification of Compnonents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)ISV-1AB Babcock-Wilcox 15958-2-1 1075 N/A 1977 7. Description of Work Replaced Component/Part/Appurtenance Additional Description
- 8. Tests Conducted:
Hydrostatic F Description (Optional): placed plug assembly in valve ISV-IAB.Pneumatic r-Nominal Operation Pressure P" Exempt F Other IF Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 6 in. (nominal)Weld Isometric Drawing No(s).: MCFI-SV-2 Sheet 2 of 2 System Class: ASME C1ass2 Flow Diagram No(s).: MCFD- 1593-01.03 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on N IS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. NIA Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date June, 24 .20 10 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of*Connecticut have inspected the components described in this Owner's Report during the period 2-Z " -6 to 12- c ., and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor h'employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' eport. Furthermore, neither the I ector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r onnected with this inspection /F Swan C,,ommisins NC1524-N-I 7 Inspector's Signature 'Date L/National Board. State, Province, and Endorsements 20/&2 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 9/28/2011 1. Owner 2. Plant Duke Energy Carolinas, L~6 Smith Chiimh Street Ch~rIotte NC. 28201 Address McGuire Nuclear Station Name 12700 Haiers Ferry Road, Huntersville, NC 28078 Sheet .I of 2 Unit I Address 3. Work Performed by Duke EneraW Carolinas. LLC Name 1897294-12 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 Soh Church Street. Charlotte. NC 28201-1006 I Address Expiration Date: 'N'1 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 19-1L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped ComponentName of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)NV Piping Duke Energy N/A 37 N/A 1981 Installed Yes 7. Description of Work Replaced Component/Part/Appurtenance Additional Description Rt 8. Tests Conducted: Hydrostatic F" Description (Optional): placed bolting in flange INVFE533Q. Pneumatic '-Nominal Operation Pressure F'T Exempt r- Other r Pressure_PSI Test Temp. _ IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: MCFI-INV5 Flow Diagram No(s).: MCFD-1554-01.01 Support/Restraint Sketch/Drawing No(s).: MCSRD-NVA Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist N', ,,- Date September 28 , 20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period_to Z and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' seport. Furthermore, neither th nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o nnected with this inspection. JF Swan Commissions NB11473-NC1524, N-1 Inspector's Signature " ' /Date r- 3-P -National Board, State, Province, and Endorsements 20// FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/16/2011
- 1. Owner 2. Plant Duke Energv Carolinas.
LI I 526 South Church Street. Charlotte. NC, 28201 Sheet I of 2 Address McGuire Nuclear Station Name 12700 Halzers Ferry Road, H-untersville, NC 28078 Unit I 1905977-02 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Address 3. Work Performed by Duke Energy Carolinas, LLC Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street. Charlotte, NC 28201-1006 Address N/A 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME 111 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)INV155 Dresser TE09048 292 N/A 1978 Removed Yes INVI55 *Dresser TE09049 293 see description below 1978 Installed Yes 7. Description of Work Additional Description Replaced Comronent/Part/Alpurtenance Replaced relief valve INV 155.8. Tests Conducted: Hydrostatic r- Pneumatic rT Nominal Operation Pressure P- Exempt r- Other F- Pressure 'PSI Test Temp. °F Description (Optional): This valve was from original construction equipment installed at valve 2NV155 location (NB# 80, YB 1982 for NV System) FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions ofrthe ASMIE Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 x 6 in. (nominal) 5' stem Class: ASME Class 2 Weld Isometric Drawing No(s).: MCFI- NV34 Sheet 2 of 2 Flow Diagram No(s).: MCFD- 1554-02.01 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 16 ,20,)1H Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of__Connecticut have inspected the components described in this Owner's Report during the period qL -.3c> Z to /0 . , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section X1.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. JF Swan = Commissions NBI1473-NC1524, N-I Inspector's Signature .National Board. State. Province, and Endorsements e /0iseco' -ignature1/
- 1. Owner 2. Plant Duke Energy Carolinas,.
L 526 South Church Street,-Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl C. Date 7/22/2010 Charlotte,.NC, 28201 ...... .Sheet I of 2 Station Unit I Name rrv Road, Huntersville, NC 28078 1911887-01 12700 Hagers Fer Address 3. Work Performed by Duke Energy Carolinas, LLC Name 526 South Church*Street, Charlotte, NC 28201-1006 Address Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section Xl used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed. or Stamped ComponentName of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-NV-435 Duke Energy 19881 N/A N/A N/A Removed No IMCA-NV-435 Duke Energy 37048 N/A N/A N/A Installed No 7. Description of Work Replaced Cosmponent/Part/Appurtenance Additional Description R(8. Tests Conducted: Hydrostatic F Description (Optional): ~placed snubber on hanger I MCA-NV-43 5.Pneumatic r-Nominal Operation Pressure r" Exempt F" Other F-Pressure PSI Test Temp. __ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD- 1554-0'3.00 Support/Restraint Sketch/Drawing No(s).: IMCA-NV-435 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NVA-006 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist -Date July 22 20 Owner or Owner's Designee. Title f CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 7 t 7" 2 $ -" o, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither t Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro or connected with this inspection JF "Commissions NC 1524, N-I aNational Board, State, Province, and Endorsements
- 1. Owner 2. Plant Duke Fner~v Carolina.~
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/18/201.1 Charlotte, NC, 28201 Sheet I of 2 Duke Enerav Carolinas L 526 South Church Street.McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energv Carolinas. LLC Unit I 1917396-13 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)3. Work Performed by Name Type Code Symbol Stamp: Authorization No.: 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: '"'4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME II1 1971. Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Nameof Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)Excess Letdown HX Atlas Industrial 1809 1554 N/A 1972 Installed Yes 7. Description of Work Additional Description Reolaced Comlonent/Part/Alpourtenance Replaced bolting material on Excess Letdown Heat Exchanger.
- 8. Tests Conducted:
Hydrostatic r- Pneumatic F Nominal Operation Pressure P Description (Optional): test performed per procedure MP/0/A/7700/045. Exempt r- Other F Pressure.PSI Test Temp. __ F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD-1554-01.02 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCM-1201.26-0007.001 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist N.Z'A4, Date October 18 ,20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period-'ý -90L-./ to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspetar nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection. JF Swan a .p .,Commissions NBI1473-NCI524,NN-! S Inspector's Signature J "National Board, State, Province, and Endorsements Date& oZC , 2-FORM NIS-2 OWNER'S REPOR As Required by the P 1. Owner .Duke Eneirg CaroJinas. LLC .526 South Church Street,. CharlotteNCQ 28201 .Address 2. Plant McGuire Nuclear Station Name 12700 Hag~ers Ferr RoadHuntersyville, NC2.8078 Address 3. Work Performed by Duke. Energy Carolinas_ LLC.Name 526 South Church Street,..h;arlohtQ. NC_28201 -.!006-Address T FOR REPAIR/REPLACEMENT ACTIVITY rovisions of the ASME Code Section XI------..._____- Date 9/2/2010........ ...... ..Sheet I of 2 Unit 1.191I8405-01 Unit .!.1918405-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System ND -Residual Heat Removal 5. (a) Applicable Construction Code ASME II1 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCA-ND-327 Duke Energy 6696 N/A N/A N/A Removed No IMCA-ND-327 Duke Energy 37056 N/A N/A N/A Installed No 7. Description of Work Replaced Coomponent/Par't'Appurtenance Additional Description Rt 8. Tests Conducted: Hydrostatic " Description (Optional): eplaced snubber on hanger I MCA-ND-327. Pneumatic F" Nominal Operation Pressure F Exempt FP Other IF Pressure-PSI Test Temp. __-IF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal)System Class: ASMEMClass02 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1561-0l .00 Support/Restraint Sketch/Drawing No(s).: I MCA-ND-327 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist , "Date September 2 -,201.Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period S .5 -,/C to 9 , ) ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither th nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o onnected with this inspection. JF Swan Commissions NC1524, N-I Inspector's Signature "National Board, State. Province, and Endorsements Date6/,/ 20-Z
- 1. Owner 2. Plant Duke Enerqv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI AC Date 9/27/2011 Charlotte, NC, 28201 Sheet I of 2 526 South Church Street McGuire Nuclear Station Name 12700 Hagem Ferrv Road_ Huntersville-NC 28078 Unit 1 1919132-18 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or RepairfReplacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte. NC 28201-1006 Address 4. Identification of System NS -Containment Spray 5. (a) Applicable Construction code ASME 111 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section X1 Code Case(s) N/A 6. Identification of Cornmonents Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-NS-767 Duke Energy N/A N/A N/A N/A Installed No.5. 4 4 4 .5. 1 .5.+ 4 I 4 4 1 .5.+ I 4 4 4 4 7. Description of Work Additional Description Replaced Component/Part/Appurtenance Replaced hanger I MCR-NS-767 with new support.8. Tests Conducted: Hydrostatic -Description (Optional): Pneumatic '-Nominal Operation Pressure " Exempt r7" Other F" Pressure PSI Test Temp. _ °F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 8 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1562-03.01 Support/Restraint Sketch/Drawing No(s).: I MCR-NS-767 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: MCSRD-NS-06-002, EC101539 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date September27 20-1l Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period Yto _ " 7(?- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspe r nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from oEconnected with this inspection. JF Swan , 'Commissions NB 11473-NC 1524, N-I Inspector's Signatur .National Board, State, Province, and Endorsements
- 1. Owner 2. Plant Duke Energy Qaroninasj_L 526. South Church Street.(Address McGuire Nuclear FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI L,_ ---... .-.. .. .. .--.... .. ... .... ..... D ate 9/2 8/20 10 Charlotte,_NC, 282.01...
...... .......... Sheet 1 of 2 Station 3. Work Performed by Name 12700 Hagers Frrry o unte~rsy ill.NC2-8078 Address Duke .Energy Carro~Ljas_,LLC Name 526 South Church Street, Charlotte, NC 28201-1006 Address Unit i.1919840-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 4. Identification of System VI -Instrument Air 5. (a) Applicable Construction Code ASME I1 19 71 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section X1 used for Repair/Replacement Activity 1998 Edition with the_1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IVI149 Kerotest ADF7-11 6570 N/A 1975 Installed Yes 7. Description of Work Replaced ComponentlPart/Appurtenance Additional Description
- 8. Tests Conducted:
Hydrostatic Description (Optional): Replaced disc in valve IV1149.Pneumatic F Nominal Operation Pressure F1 Exempt F Other F' Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: MCFI-IV122 Sheet 2 of 2 System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 1605-01.02 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist
- Date September 28 ,2010 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut have inspected the components described in this Owner's Report during the period e-!1 , -/0Z to 9 -a?'- 1and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owher's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from with this inspection.
JF Swarl G ,7 .Commissions NC1524, N-1 Inspector's Sign: Date 9- 2 L-ature I'l National Board, State, Province, and Endorsements 20L I, I. Owner Duke 526 S 2. Plant 3. Work Performed by Enerav Carolinas. Li FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/15/2011 Charlotte, NC. 28201 Sheet I of 2 outh Church Street.Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name 526 South Church Street. Charlotte, NC 28201-1006 Address Unit 1 1919840-09 Work Order # (or Repair/Replacement Organization P.O. No., Job No.. etc.)Type Code Symbol Stamp: NfA Authorization No.: N/A Expiration Date: N/A 4. Identification of System VI -Instrument Air 5. (a) Applicable Construction Code ASME 111 1971L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1VI 149 Kerotest ADF7-11 6570 N/A 1975 Removed Yes IVI149 Velan 111030 N/A N/A 2011 Installed Yes 7. Description of Work Replaced Component/Part/Appurtenance Additional Description Cut out and replaced valve I VI 149 per ECI 03658.8. Tests Conducted: Hydrostatic r- Pneumatic F" Nominal Operation Pressure Description (Optional): test performed per procedure MP/0/A/7650/076. Exempt r" Other '- Pressure 100 PSI Test Temp. 74.7 OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: -) -in. (nominal)Weld Isometric Drawing No(s).: MCFI-IV122 System Class: ASME Class 2 Flow Diagram No(s).: MCFD-l605-0l .02 Support/Restraint Sketch/Drawing No(s).: N/A Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: ECI03658 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist " 4 bSt¢." Date October 15 _ 20 11 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period z7L. /.z/(/ to ./.Q-1(- // , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code. Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the l spector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from 4 connected with this inspection. JF Swan .I2,,=., b-A-= /.i Commissions NBI1473-NC1524,N-I Dat(Inspector's Signature' National Board. State. Province. and Endorsements -)0-A 09/20/11 TUE 07:23 FAX QA LAB Q 002 111030 FORM NPV-1 CERTIFICATE HOLDER'S DATA REPORT FOR NUCLEAR PUMPS OR VALVES As Required by the Provisions of the ASME Code, Section III, Division I pg. 1 of2 1. Manulactured and certified by VELAN INC. 2125 WARD AVEMONTREAL.QUEBEC CANADA H4M1 T6{nan and adldrm of N Cetificate hddur)2. Manufactured for DUKE ENERGY, PO BOX 37025. CHARLOTTE, NC. 28237-7925. UNITED STATES (narme and address asd PuRatir)DUKE ENERGY, MCGUIRE NUCLEAR STATION, 13225 HAGERS FERRY RD, HWY 73.3. Location of installation HUNTERSVILLE. NO. 28078-8985. UNITED STATES (oams'e md nddrnis)PISTON 4. Model No., Series No., or Type CHECK Drawing Pal 1-856478-NOI Rev. CRN N/A 6. ASME Code, Section I11, Divislon 1 1989 'NONE LloCs NIA.6. Pump or valve VALVE Nominal Inlet siie 2" Outlet size i 2" 7. Material-(a) valve Body SA-182, F316 Bonnet SA-1-82, F316 Disk SFA6.21,ERNiCr-A (b) pump Casing NIA Cover -- N/A Bolting NIA (a)Certificate Holder's Serial No.111030V (b)National Board No.N/A (c)Body/Casing Serial No.MMCAF1 (d)Bonnet/Cover Serial No.MMOYV2 SA4564, GR 630 HI 100.Bolting SA-194, GR 8M (e)Disk Serial No.05-7O 14___ I--~ I'Supplem~ental informstlon In the form of Ilets, sketches.. of drawings -nc a5 i ce 4 pcaviled: ( 1) size is 5%A %11; (2) information in ttnims I through 4dan this Data Revort is itictaided on each sh'eet; and (3) each sheet is numbered and Ihe r,,anhnt of sheets Is feCCore~d at the to of thi~s form.(07110)'4355 JPGE 3OF,ý:J-09/20/11 TUE 07:23 FAX QA LAB FORM NPV-1 (Back -Pg. 2 of .2.)Certificate HDoder's Sefrii No- 111030 8. Design conditions Ii5 psi vs 250 OF or valve pressure Cdass 800 9. Cold working pressure 1920 psI at 100 'F 10. Hydrostatic test 2900 pal. DIsk differential lesit pressure 21_50 psi 11, Remarks MATERIALS MEET ASME SECTION II EDI1ION: 2004 ADDENDA: NONE CERTIFICATION OF DESIGN Design Specification certified by JAMES M. L AMB. JR. P.E. Slate NC Reg. no. 6005NC Design Report certified by P.MA.IOR P.E. Slate QUE Reg. no. 37162 CERTIFICATION OF COMPLIANCE We cerd~fy that the statements made In this report am correct and that this pump or valve conforms to the rufes for construction of the ASMF- Code, Section 111. Division N Ceriffi'ate of Authorization No. N-2797-1 -Expires --ýU a 21 CERTIFICATION OF INSPECTiON I, the undersigned, holding a valid commimion Issued by t11e National Board of Boiler and Pressure Vessil Inspectors and the State or Province of QUEBEC and employed by REGIE DU BATIMENT of QUEBEC have inspected the punp, or valve, described In this Data Report on ,and state that to the best of rnv knowledge and belief. the Certificate Holder has constrcted this pump, or valve, in accordance with the ASME Code. Section III. Division 1.By signing this certlicato neither the Inspector nor his einpkoyer makea any warranty, expressed or Implied, oncernlng the component described In this Data Report Furthermore, nai" khe I-pciprho. ..f hr. employer shall be labe In any manner for any ejsnlnjury or property damage or a loss of any kind or conillt rdeclon. C.s r'.' ' ... C k. , Datle 1 5 SEP. 7111 Signed Z , ,.- CommissIons ... .Q1B, G U -=QJEBSC 6 (l 4355 PG
- 1. Owner 2. Plant Duke Eneray Carolinas, L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC -Date 10/10/2Oi1 Charlotte, NC, 28201 Sheet I of 2~,96 Sniith Church Street 526 South Church Street AAA McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Unit 1 1919897-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1919897-01 Work Order # (or Repair/Replacement Organization P.O. No.. Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A XT/ A 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical & Volume Control 5. (a) Applicable Construction Code ASME Ill 192L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No),1NV220 Dresser TE57945 1739 :N/A .1980 Removed Yes I1NV220 Dresser TG33979 1884 MC24681 1984 Installed Yes I I .L A. -, 7. Description of Work Additional Description Re 8. Tests Conducted:
Hydrostatic FT Description (Optional): placed valve INV220 and it's flange bolting material Pneumatic r'Nominal Operation Pressure F Exempt F Other f Pressure PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 1 1/2 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-03.00 Support/Restraint Sketch/Drawing No(s).: MCFI- I NV4 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. .N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist '...<'/ e.- Date October 10 2011 Owner or Owner's Designee. Title I CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period 2C L2.zL41...to ' -/(,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne 's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspection. JF Swan, .Commissions NBI 14733-NC 1524, N-I Inspector's Signature -National Board, State, Province, and Endorsements D te/ 10 -/0O , 20i1/
- 1. Owner 2. Plant Drike Pnei-~v CarA1ina~
Ii FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 10/3/2011 Charlotte, NC, 28201 Sheet '1 of :2 Duke Energv Carolinas L 526 South Church Street, A McGuire Nuclear Station Name 12700 Haiers Ferry Road, Huntersville, NC 28078 Unit I 1920006-01 Address 3. Work Performed by Duke Enerps Carolinas, LLC Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Name Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NI -Safety Injection 5. (a) Applicable Construction Code ASME IlI 1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected. ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)MCR-NI-702 Duke Energy 21082 N/A N/A N/A Corrected No 7. Description of Work Additional Description Replaced Cormonent/Part/Appurtenance Replaced rear pivot mount on hanger I MCR-NI-702
- 8. Tests Conducted:
Hydrostatic F Description (Optional): Pneumatic F" Nominal Operation Pressure F Exempt F Other F Pressure.PSI Test Temp. - FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 2 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1562-02.00 Support/Restraint Sketch/Drawing No(s).: 1MCR-NI-702 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 3 ,2011 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period to / -and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither th Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fromr fconnected with this inspection IJF Swan Commissions NBI 1473-NC 1524, N-I Inspector's Signature National Board, State. Province, and Endorsements Date / D -L/20//I
- 1. Owner 2. Plant Duke Energy Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 1C Date .9/27/2011 Charlotte, NC, 28201 Sheet 1 of :2 526 South Church Street, McGuire Nuclear Station Name 12700 1-aters Ferry Road. I-untersville.
NC 28078 Unit 1 1922133-01 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System BB -Steam Generator Blowdown Recycle 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 19721 Edition, Summer and Winter Addenda, N/A Code Case lition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)I MCR-BB-585 Duke Energy :20731 N/A 1N/A N/A Removed No IMCR-BB-585 Duke Energy 38051 N/A .N/A :N/A Installed No 7. Description of Work Rej Additional Description Re 8. Tests Conducted: Hydrostatic F Description (Optional): placed Component/Part/AIpurtenance ~placed snubber on hanger I MCR-BB-585 Pneumatic r" Nominal Operation Pressure rF Exempt 17 Other F Pressure PSI Test Temp. _ OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD- 1580-01.00 Support/Restraint Sketch/Drawing No(s).: IMCR-BB-585 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist ..Date September 27 ,20 11 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of tonnecticut have inspected the components described in this Owner's Report during the period-a z?-L/L/ to... and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner' Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspVction. JF Swan // , Cnmmiszinon NBI 1473-NC 1524, N-I o Da42 Inspector's Signature qa 20I)1P/National Board, State, Province, and Endorsements 20 //
- 1. Owner 2. Plant Duke Energy Carolinas, LI 526 South Church Street.FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI L.C Date 1 J0/./201j Charlotte, NC, 28201 Sheet 1 of 2 A AA..,.McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922134-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME I1 (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section Xl Code Case(s) N/A 6. Identification of Components 197L Edition, Summer and Winter ition with the 1999 and 2000 Addenda Addenda, N/A Code Case Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)MCR-INV-548 Duke Energy 19983 N/A -N/A ,N/A Removed No MCR-INV-548 Duke Energy 38409 /A "N/A N/A Installed No 7. Description of Work Replaced Comnonent/Part/AMurtenance Additional Description Re 8. Tests Conducted:
Hydrostatic FT Description (Optional):-placed snubber on hanger MCR-lINV-548 Pneumatic IT Nominal Operation Pressure F Exempt F Other I'Pressure 'PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of.2 Component Line Size: 2 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASMFE Class 2 Flow Diagram No(s).:.MCFD- 1554-01.01 Support/Restraint Sketch/Drawing No(s).: MCR-INV-548 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 1 ,2011 Owner or Owner's Designee, Tide CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province ofýNorh Carolina and employed Hartford Steam Boiler Inspection and Insurance Company of Connecticut have inspected the components described in this Owner's Report during the period"" " to"-/-' .t and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Repr. Furthermore, neither the Inspec nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or co/t/ected with this inspection.
- JF Swan / / ,-Commissions NBI 1473-NC 1524, N-I" 7Inspector's Signature National Board, State, Province, and Endorsements
/_/L
- 1. Owner 2. Plant Duke Energv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date 10/1/2011 Charlotte, NC, 28201 Sheet I. of 2 526 South Church Street. , Addoress McGuire Nuclear Station Name 12700 Halers Ferry Road, Huntersville, NC 28078 Address Duke Energy Carolinas, LLC Name Unit 1 1922135-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A 7 Authorization No.: N/A.... ..NI/A 3. Work Performed by 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III .1971 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) 'N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)-IMCR-NV-1006
- Duke Energy .20707 .N/A N/A N/A Removed No..IMCR-NV-1006 Duke Energy 37609 :N/A N/A N/A Installed No......... .. .. .... 1 ... .... .. .. ....7. Description of Work Rep Additional Description Re 8. Tests Conducted:
Hydrostatic Description (Optional): placed Component/Part/Appurtenance ,placed snubber on hanger 1MCR-NV-1006 Pneumatic F Nominal Operation Pressure F Exempt F Other r Pressure:PSI Test Temp. _ FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 3 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1554-01.02 Support/Restraint Sketch/Drawing No(s).: 1MCR-NV-1006 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xi.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October I ,20 111 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina Hartford Steam Boiler Inspection and Insurance Company of NothCaolnaand employed by o iConnecticut have inspected the components described in this Owner's Report during the period 7 c2. '7-il to.i and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspecto or his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connected with this inspection.,JF Swan 9 p, "..'-' .,. / -Commissions NBI 1473-NC1524, N-I.1 Inspector's Signature National Board. State. Province, and Endorsements Date(J /0--/
- 1. Owner 2. Plant Duke Enerqv Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date .10/9/2011 Charlotte, NC, 28201 Sheet -I of 2 526 South Church Street, 4 McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922137-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street, Charlotte, NC 28201-1006 Address Expiration Date: "'" 4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 192L Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No):NV-100-02-S Duke Energy 21437 N/A N/A N/A Removed No NV-100-02-S .Duke Energy 37837 :N/A .N/A N/A Installed No" ........ .. .... ...7. Description of Work Re Additional Description R 8. Tests Conducted: Hydrostatic F" Description (Optional): placed Component/Part/Appurtenance eplaced snubber and it's bolting material on hanger I -MCR-S-NV-100-02-S.Pneumatic r-Nominal Operation Pressure FT Exempt r Other r- Pressure _ PSI Test Temp. _F FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X]9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASME Class 2 Weld Isometric Drawing No(s).: N/A Sheet 2 of 2 Flow Diagram No(s).: MCFD-1554-01.01 Support/Restraint Sketch/Drawing No(s).: 1-MCR-S-NV-100-02-S Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist T Date October 9 ,2011, Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of;Connecticut have inspected the components described in this Owner's Report during the period'7-. /1 to A0-/V -/( ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section. XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this OwneA 's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising fro r connected with this inspectio Commissions NB11473-NC1524, N-I S Inspector's Signature National Board, State, Province, and Endorsements Dal / " /0 ..2 0./
- 1. Owner 2. Plant Duke Energy Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI C Date "9121/2011 harlotte, NC. 28201 Sheet I of 2 52t~ ~nith Church Str~.et (526 South Church Street McGuire Nuclear Station Name Unit 1 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name 1922138-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System NF -Ice Condencer Refrigeration
- 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 1971. Edition, 'Summer and Winter Addenda, 1N/A Code Case lition with the 1999 and 2000 Addenda A ition wi the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IMCR-S-NF-100-01H.i Duke Energy 163 N/A ..N/A N/A Removed No IMCR-S-NF-100-0 1HH Duke Energy 37836 .N/A N/A N/A Installed No 7. Description of Work Replaced Component/Part/A1Murtenance Additional Description Re 8. Tests Conducted:
Hydrostatic FT Description (Optional): ~placed sn ubber on hanger I MCR-S-N F- 100-0 1 H Pneumatic "7 Nominal Operation Pressure r'Exempt FF Other 1" Pressure _ PSI Test Temp. -OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Component Line Size: 4 in. (nominal) System Class: ASME Class Weld Isometric Drawing No(s).: N/A Flow Diagram No(s).: MCFD-1558-04.00 Support/Restraint Sketch/Drawing No(s).: IMCR-S-NF-100-01 H Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Sheet 2 of 2 2 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technicai Specialist Date September21 20-1L Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of'Connecticut__ have inspected the components described in this Owner's Report during the period.i: --z o..LL.../V to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this 0 ner's Report. Furthermore, neithe he Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising or connected with this inspect.JF w ,-.Commissions NB 11473-NC 1524, N-I Ic National Board, State, Province, and Endorsements ýate2 q. ,2:
- 1. Owner 2. Plant Duke Enerv Carolinas, LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X!LC Date ;10/1/2011 Charlotte, NC, 28201 Sheet i of,2 526 South Church Street-ý AA McGuire Nuclear Station Name Unit I 12700 Hagers Ferry Road, Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC* Name 1922139-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: 526 South Church Street. Charlotte, NC 28201-1006 Address Expiration Date: "-4. Identification of System NV -Chemical and Volume Control 5. (a) Applicable Construction Code ASME III 1921 Edition, Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Come Manufacturer National Other Year Removed, or Stamped Name of Manufacturer Serial.No.
Board No. Identification Built Installed (Yes or No).MCR-1NV-972 Duke Energy 14844 N/A /N/A N/A Removed No MCR-INV-972 ýDuke Energy 38405 N/A .N/A N/A Installed No....... ...* ". * ...... .." " .. ..... .... ... ..... ........ ....... .~~~~.... ...... ......1:! .... ... ....7. Description of Work Rei Additional Description R 8. Tests Conducted: Hydrostatic F Description (Optional): ~laced ComponentfPart/Apipurtenance eplaced snubber on hanger MCR- I NV-972 Pneumatic 1" Nominal Operation Pressure F Exempt F Other F.Pressure. ____PSI Test Temp. _. .OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of.2 Component Line Size: 2 in. (nominal)System Class: ASME Class 2 Weld Isometric Drawing No(s).:NA Flow Diagram No(s).: MCFD-1554-0l .01 Support/Restraint Sketch/Drawing No(s).: MCR-INV-972 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October I ,20_ 1 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.Nonnethaicut and employed by Hartford Steam Boiler Inspection and Insurance Company of have inspected the components described in this Owner's Report during the period.Connecticut 7'- L2 r I- to U , and state that to the best ofmy knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither nspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspectio JFSwan (I gA... .- ... Commissions NBI 1473-NC1524, N-I Data Inspector's Signaturo--- 00'National Board, State, Province, and Endorsements / ~ ~ k r\2c// 1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section X1 LC Date 10/1/2011 1. Owner 2. Plant Duke Enerv Carolinas, LI 12700Crc Harerst Fhrrl oad. Hntervil282C0207 Address McGuire Nuclear Station Name 12700 Hagers Ferry Road, Huntersville, NC 28078 Sheet 1 of '2 Unit I_.1922155-01 Address 3. Work Performed by Duke Eneray Carolinas, LLC Name Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: Authorization No.: Expiration Date: 526 South Church Street, Charlotte, NC 28201-1006 Address N/A 4. Identification of System :CF -Feedwater 5. (a) Applicable Construction Code ASME III (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Ed (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components 191L Edition, %Summer and Winter Addenda, N/A Code Case lition with the 1999 and 2000 Addenda Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)1MCR-CF-404 Duke Energy 33742 N/A N/A N/A Removed No 1MCR-CF-404 Duke Energy 38109 N/A N/A N/A Installed No 7. Description of Work tx~una'.~.~ ,S.~kJA~JSJfl~~,I IL' I at,, flu u,,, Lt.nna,,t,~ Additional Description R(8. Tests Conducted: Hydrostatic " Description (Optional): eplaced snubber on hanger I MCR-CF-404 Pneumatic F Nominal Operation Pressure F'Exempt P Other F Pressure ___PSI Test Temp. OF FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI 9. Remarks (Should Include the Following Information, as Applicable): Sheet 2 of 2 Component Line Size: 16 in. (nominal)Weld Isometric Drawing No(s).: N/A System Class: ASME Class 2 Flow Diagram No(s).: MCFD-l591-0l .01 Support/Restraint Sketch/Drawing No(s).: IMCR-CF-404 Other Applicable Information (e.g., W.O. No., EC No.) if not included elsewhere on NIS-2 Form: Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass, Quality Assurance Technical Specialist Date October 1 201-1 Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by Hartford Steam Boiler Inspection and Insurance Company of:Connecticut have inspected the components described in this Owner's Report during the period' 7- ¢2'7. ii/ to / II....../ and state that to the best ofmy knowledge and belief, the Owner has performed examinationsand taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Ownels Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from r connected with this inspectio JF Swan 1/ -Commissions NBI 1473-NC1524, N-I Da (e Inspector's Signature /7 -/D-/ :, National Board, State, Province, and Endorsements 20//
- 1. Owner 2. Plant Duke Energy Carolinas.
LI FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI LC Date 10/1/2011 Charlotte, NC, 28201 Sheet 1 of 2 526 South Church Street., I A..IJ ....Address McGuire Nuclear Station Name 12700 Hapers Ferry Road. Huntersville, NC 28078 Address 3. Work Performed by Duke Energy Carolinas, LLC Name Unit I 1922156-01 Work Order # (or Repair/Replacement Organization P.O. No., Job No., etc.)Type Code Symbol Stamp: N/A Authorization No.: N/A Expiration Date: N/A 526 South Church Street, Charlotte, NC 28201-1006 Address 4. Identification of System CF -Feedwater 5. (a) Applicable Construction Code ASME HI 1971 Edition, **Summer and Winter Addenda, N/A Code Case (b) Applicable Edition of Section XI used for Repair/Replacement Activity 1998 Edition with the 1999 and 2000 Addenda (c) Applicable Section XI Code Case(s) N/A 6. Identification of Components Corrected, ASME Code Name of Manufacturer National Other Year Removed, or Stamped Component Name of Manufacturer Serial No. Board No. Identification Built Installed (Yes or No)IIMCR-CF-403 Duke Energy 3*3793 N/A N/A N/A Removed No 1MCR-CF-403 Duke Energy 38111 ;N/A *N/A N/A Installed No I .7. Description of Work Ret Additional Description Re 8. Tests Conducted: Hydrostatic " Description (Optional): laced Cominonent/Part/A1urtenance placed snubber on hanger I MCR-CF-403 Pneumatic r-Nominal Operation Pressure F'Exempt F Other F'Pressure PSI Test Temp. _ OF}}