ML18066A650: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 101: | Line 101: | ||
* Completion Times 1.3 1.3 Completion Times DESCRIPTION (continued) | * Completion Times 1.3 1.3 Completion Times DESCRIPTION (continued) | ||
However, when a subsequent train, subsystem, component, or variable expressed in the Condition is discovered to be inoperable or not within limits, the Completion Time(s) may be extended. | However, when a subsequent train, subsystem, component, or variable expressed in the Condition is discovered to be inoperable or not within limits, the Completion Time(s) may be extended. | ||
To apply this Completion Time extension, two criteria must first be met. The subsequent inoperability: | To apply this Completion Time extension, two criteria must first be met. The subsequent inoperability: | ||
: a. Must exist concurrent with the first inoperability; and b. Must remain inoperable or not within limits after the first inoperability is resolved. | : a. Must exist concurrent with the first inoperability; and b. Must remain inoperable or not within limits after the first inoperability is resolved. | ||
The total Completion Time allowed for completing a Required Action to address the subsequent inoperability shall be limited to the more restrictive of either: a. The stated Completion Time, as measured from the initial entry into the Condition, plus an additional 24 hours; or b. The stated Completion Time as measured from discovery of the subsequent inoperability. | The total Completion Time allowed for completing a Required Action to address the subsequent inoperability shall be limited to the more restrictive of either: a. The stated Completion Time, as measured from the initial entry into the Condition, plus an additional 24 hours; or b. The stated Completion Time as measured from discovery of the subsequent inoperability. | ||
Line 240: | Line 240: | ||
* SURVEILLANCE REQUIREMENTS SR 3.1.2.1 SURVEILLANCE | * SURVEILLANCE REQUIREMENTS SR 3.1.2.1 SURVEILLANCE | ||
------------------------------1\J()TE---------------------------- | ------------------------------1\J()TE---------------------------- | ||
The predicted reactivity values may be adjusted (normalized) to correspond to the measured core reactivity prior to exceeding a fuel burn up of 60 Effective Full Power Days (EFPD) after each fuel loading. Verify overall core reactivity balance is within +/- 1 % Llp of predicted values. Palisades l'Juclear Plant 3.1.2-2 Reactivity Balance 3.1.2 FREQUENCY Prior to entering M()DE 1 after each fuel loading | The predicted reactivity values may be adjusted (normalized) to correspond to the measured core reactivity prior to exceeding a fuel burn up of 60 Effective Full Power Days (EFPD) after each fuel loading. Verify overall core reactivity balance is within +/- 1 % Llp of predicted values. Palisades l'Juclear Plant 3.1.2-2 Reactivity Balance 3.1.2 FREQUENCY Prior to entering M()DE 1 after each fuel loading | ||
()nly required after initial 60 EFPD 31 EFPD Amendment No. | ()nly required after initial 60 EFPD 31 EFPD Amendment No. | ||
MTC 3.1.3 | MTC 3.1.3 | ||
Line 286: | Line 286: | ||
Special Test Exceptions (STE) 3.1.7 | Special Test Exceptions (STE) 3.1.7 | ||
* 3.1 REACTIVITY CONTROL SYSTEMS 3.1. 7 Special Test Exceptions (STE) * | * 3.1 REACTIVITY CONTROL SYSTEMS 3.1. 7 Special Test Exceptions (STE) * | ||
* LCO 3.1.7 During the performance of PHYSICS TESTS, the requirements of LCO 3.1.4, LCO 3.1.5, LCO 3.1.6, .LCO 3.4.2, "Control Rod Alignment"; "Shutdown and Part-Length Rod Group Insertion Limits"; "Regulating Rod Group Position Limits"; and "PCS Minimum Temperature for Criticality" may be suspended, provided: | * LCO 3.1.7 During the performance of PHYSICS TESTS, the requirements of LCO 3.1.4, LCO 3.1.5, LCO 3.1.6, .LCO 3.4.2, "Control Rod Alignment"; "Shutdown and Part-Length Rod Group Insertion Limits"; "Regulating Rod Group Position Limits"; and "PCS Minimum Temperature for Criticality" may be suspended, provided: | ||
: a. THERMAL POWER is 2% RTP; b. 1 % shutdown reactivity, based on predicted control rod worth, is available for trip insertion; and c. Tave is 500°F. APPLICABILITY: | : a. THERMAL POWER is 2% RTP; b. 1 % shutdown reactivity, based on predicted control rod worth, is available for trip insertion; and c. Tave is 500°F. APPLICABILITY: | ||
MODE 2 during PHYSICS TESTS. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. THERMAL POWER not A.1 Reduce THERMAL 15 minutes within limit. POWER to within limit. ' 8. Shutdown reactivity not 8.1 Initiate boration to 15 minutes within limit. restore shutdown reactivity to within limit. C. Tave not within limit. C.1 Restore Tave to within 15 minutes limit. Palisades Nuclear Plant 3.1.7-1 Amendment No. | MODE 2 during PHYSICS TESTS. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. THERMAL POWER not A.1 Reduce THERMAL 15 minutes within limit. POWER to within limit. ' 8. Shutdown reactivity not 8.1 Initiate boration to 15 minutes within limit. restore shutdown reactivity to within limit. C. Tave not within limit. C.1 Restore Tave to within 15 minutes limit. Palisades Nuclear Plant 3.1.7-1 Amendment No. | ||
Line 297: | Line 297: | ||
LHR, as determined by the Excore Monitoring System, not within limits specified in the COLR. LHR, as determined by manual incore detector readings, not within limits specified in the COLR. Palisades Nuclear Plant REQUIRED ACTION Restore LHR to within limits. 3.2.1-1 COMPLETION TIME 1 hour Amendment No. | LHR, as determined by the Excore Monitoring System, not within limits specified in the COLR. LHR, as determined by manual incore detector readings, not within limits specified in the COLR. Palisades Nuclear Plant REQUIRED ACTION Restore LHR to within limits. 3.2.1-1 COMPLETION TIME 1 hour Amendment No. | ||
* * | * * | ||
* ACTIONS CONDITION | * ACTIONS CONDITION | ||
: 8. lncore Alarm and Excore Monitoring Systems inoperable for monitoring LHR. C. Required Action and associated Completion Time not met. SURVEILLANCE REQUIREMENTS | : 8. lncore Alarm and Excore Monitoring Systems inoperable for monitoring LHR. C. Required Action and associated Completion Time not met. SURVEILLANCE REQUIREMENTS | ||
Line 346: | Line 346: | ||
B. One High Startup Rate trip B.1 Restore trip unit and Prior to entering unit or associated associated instrument MODE 2 from instrument channel channel to OPERABLE MODE3 inoperable. | B. One High Startup Rate trip B.1 Restore trip unit and Prior to entering unit or associated associated instrument MODE 2 from instrument channel channel to OPERABLE MODE3 inoperable. | ||
status . Palisades Nuclear Plant 3.3.1-1 Amendment No. | status . Palisades Nuclear Plant 3.3.1-1 Amendment No. | ||
* ACTIONS CONDITION | * ACTIONS CONDITION | ||
: c. One Loss of Load trip unit or associated instrument channel inoperable. | : c. One Loss of Load trip unit or associated instrument channel inoperable. | ||
D. One or more ZPM Bypass Removal channels inoperable. | D. One or more ZPM Bypass Removal channels inoperable. | ||
Line 453: | Line 453: | ||
CONDITION REQUIRED ACTION COMPLETION TIME A. ---------------NOTE--------------- | CONDITION REQUIRED ACTION COMPLETION TIME A. ---------------NOTE--------------- | ||
A.1 Place affected bistable 7 days Not applicable to RAS . in trip. -------------------------------------- | A.1 Place affected bistable 7 days Not applicable to RAS . in trip. -------------------------------------- | ||
One or more Functions with one ESF bistable or associated instrument channel inoperable. | One or more Functions with one ESF bistable or associated instrument channel inoperable. | ||
: 8. ---------------NOTE--------------- | : 8. ---------------NOTE--------------- | ||
-----------------NOTE----------------- | -----------------NOTE----------------- | ||
Line 531: | Line 531: | ||
* 3.3 INSTRUMENTATION 3.3.7 Post Accident Monitoring (PAM) Instrumentation PAM Instrumentation 3.3.7 LCO 3.3.7 . The PAM instrumentation for each Function in Table 3.3.7-1 shall be OPERABLE. | * 3.3 INSTRUMENTATION 3.3.7 Post Accident Monitoring (PAM) Instrumentation PAM Instrumentation 3.3.7 LCO 3.3.7 . The PAM instrumentation for each Function in Table 3.3.7-1 shall be OPERABLE. | ||
APPLICABILITY: | APPLICABILITY: | ||
MODES 1, 2, and 3. ACTIONS . | MODES 1, 2, and 3. ACTIONS . | ||
: 1. LCO 3.0.4 is not applicable. | : 1. LCO 3.0.4 is not applicable. | ||
: 2. Separate Condition entry is allowed for each Ftmction.' | : 2. Separate Condition entry is allowed for each Ftmction.' | ||
CONDITION REQUIRED ACTION *COMPLETION TIME A. One or more Functions A.1 Restore required 30 days with one required channel channel to .OPERABLE inoperable. | CONDITION REQUIRED ACTION *COMPLETION TIME A. One or more Functions A.1 Restore required 30 days with one required channel channel to .OPERABLE inoperable. | ||
Line 565: | Line 565: | ||
' 3.3.8 Alternate Shutdown System ' LCO 3.3.8 The Alternate Shutdown System Functions in Table 3.3.8-1 shall be OPERABLE. | ' 3.3.8 Alternate Shutdown System ' LCO 3.3.8 The Alternate Shutdown System Functions in Table 3.3.8-1 shall be OPERABLE. | ||
APPLICABILITY: | APPLICABILITY: | ||
MODES 1, 2, and 3. '-ACTIONS em 3.8 | MODES 1, 2, and 3. '-ACTIONS em 3.8 | ||
: 1. LCO 3.0.4 is not applicable. | : 1. LCO 3.0.4 is not applicable. | ||
: 2. Separate Condition entry is allowed for each Function. | : 2. Separate Condition entry is allowed for each Function. | ||
-------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------- | ||
Line 574: | Line 574: | ||
Verify each required control circuit and transfer switch is capable of performing the intended function. | Verify each required control circuit and transfer switch is capable of performing the intended function. | ||
Alternate Shutdown System 3.3.8 FREQUENCY Once within 7 days | Alternate Shutdown System 3.3.8 FREQUENCY Once within 7 days | ||
* prior to each reactor startup 18 months SR 3.3.8.3 | * prior to each reactor startup 18 months SR 3.3.8.3 | ||
: 1. Not required for Functions 16, 17, and 18. 2. Neutron detectors are excluded from the CHANNEL CALIBRATION. | : 1. Not required for Functions 16, 17, and 18. 2. Neutron detectors are excluded from the CHANNEL CALIBRATION. | ||
Perform CHANNEL CALIBRATION for each required instrumentation channel. Palisades Nuclear Plant 3.3.8-2 18 months Amendment No. | Perform CHANNEL CALIBRATION for each required instrumentation channel. Palisades Nuclear Plant 3.3.8-2 18 months Amendment No. | ||
Line 662: | Line 662: | ||
ACTIONS Two PCS loops shall be OPERABLE and one PCS loop shall be in operation. | ACTIONS Two PCS loops shall be OPERABLE and one PCS loop shall be in operation. | ||
--------------------------------------------NOTES------------.------------------------------ | --------------------------------------------NOTES------------.------------------------------ | ||
: 1. All primary coolant pumps may not be in operation for s; 1 hour per 8 hour period, provided: | : 1. All primary coolant pumps may not be in operation for s; 1 hour per 8 hour period, provided: | ||
: a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature. | : a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature. | ||
: 2. Forced circulation (starting the first primary coolant pump) shall not be initiated unless one of the following conditions is met: a. PCS cold leg temperature (Tc) is> 430°f=; b. Steam Generator (SG) secondary temperature is equal to or less than the reactor inlet temperature (Tc); c. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is s: 10°F/hour; or d. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level is s; 57%. MODE 3. CONDITION REQUIRED ACTION COMPLETION TIME A. One required PCS loop inoperable. | : 2. Forced circulation (starting the first primary coolant pump) shall not be initiated unless one of the following conditions is met: a. PCS cold leg temperature (Tc) is> 430°f=; b. Steam Generator (SG) secondary temperature is equal to or less than the reactor inlet temperature (Tc); c. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is s: 10°F/hour; or d. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level is s; 57%. MODE 3. CONDITION REQUIRED ACTION COMPLETION TIME A. One required PCS loop inoperable. | ||
Palisades Nuclear Plant A.1 Restore required PCS loop to OPERABLE status . 3.4.5-1 72 hours Amendment No. | Palisades Nuclear Plant A.1 Restore required PCS loop to OPERABLE status . 3.4.5-1 72 hours Amendment No. | ||
Line 678: | Line 678: | ||
* APPLICABILITY: | * APPLICABILITY: | ||
Two loops or trains consisting of any combination of PCS loops and Shutdown Cooling (SOC) trains shall be OPERABLE, and either: a. One PCS loop shall be in operation; or b. One SDC train shall be in operation with :?: 2810 gpm flow through the reactor core. -------------------------------------------NOTE:S------------------------------------------- | Two loops or trains consisting of any combination of PCS loops and Shutdown Cooling (SOC) trains shall be OPERABLE, and either: a. One PCS loop shall be in operation; or b. One SDC train shall be in operation with :?: 2810 gpm flow through the reactor core. -------------------------------------------NOTE:S------------------------------------------- | ||
: 1. All Primary Coolant Pumps (PCPs) and SDC pumps may not be in operation for 1 hour per 8 hour period, provided: | : 1. All Primary Coolant Pumps (PCPs) and SDC pumps may not be in operation for 1 hour per 8 hour period, provided: | ||
: 2. a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature . Forced circulation (starting the first PCP) shall not be initiated unless one of the following conditions is met: a. Steam Generator (SG) secondary temperature is equal to or less than the reactor inlet temperature (Tc), b. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is 10°F/hour, c. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level is _57%. 3. Primary coolant pumps P-50A and P-50B shall not be operated simultaneously. | : 2. a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature . Forced circulation (starting the first PCP) shall not be initiated unless one of the following conditions is met: a. Steam Generator (SG) secondary temperature is equal to or less than the reactor inlet temperature (Tc), b. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is 10°F/hour, c. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level is _57%. 3. Primary coolant pumps P-50A and P-50B shall not be operated simultaneously. | ||
MODE4. n Palisades Nuclear Plant 3.4.6-1 Amendment No. | MODE4. n Palisades Nuclear Plant 3.4.6-1 Amendment No. | ||
Line 700: | Line 700: | ||
* PCS Loops -MODE 5, Loops Filled 3.4.7 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4. 7 PCS Loops -MODE 5, Loops Filled LCO 3.4.7 APPLICABILITY: | * PCS Loops -MODE 5, Loops Filled 3.4.7 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4. 7 PCS Loops -MODE 5, Loops Filled LCO 3.4.7 APPLICABILITY: | ||
One Shutdown Cooling (SOC) train shall be OPERABLE and in operation with 281 O gpm flow through the reactor core, and either: a. One additional SOC train shall be OPERABLE; or b. The secondary side water level of each Steam Generator (SG) shall be -84%. -------------------------------------------NOTES------------------------------------------- | One Shutdown Cooling (SOC) train shall be OPERABLE and in operation with 281 O gpm flow through the reactor core, and either: a. One additional SOC train shall be OPERABLE; or b. The secondary side water level of each Steam Generator (SG) shall be -84%. -------------------------------------------NOTES------------------------------------------- | ||
: 1. The SOC pump of the train in operation may not be in operation for 1 hour per 8 hour period provided: | : 1. The SOC pump of the train in operation may not be in operation for 1 hour per 8 hour period provided: | ||
: 2. a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature. | : 2. a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature. | ||
Both SOC trains may be inoperable for up to 2 hours for surveillance testing or maintenance provided: | Both SOC trains may be inoperable for up to 2 hours for surveillance testing or maintenance provided: | ||
: a. One SOC train is providing the required flow through the reactor core; b. Core outlet temperature is maintained at least 10°F below. saturation temperature; and c. Each SG secondary side water level -84%. 3. Forced circulation (starting the first primary coolant pump) shall not be initiated unless one of the following conditions is met: a. SG secondary temperature is equal to or less than the reactor inlet temperature (Tc); b. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is 10°F/hour; or c. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level 57%. 4. Primary coolant pumps P-50A and P-50B shall not be operated simultaneously. | : a. One SOC train is providing the required flow through the reactor core; b. Core outlet temperature is maintained at least 10°F below. saturation temperature; and c. Each SG secondary side water level -84%. 3. Forced circulation (starting the first primary coolant pump) shall not be initiated unless one of the following conditions is met: a. SG secondary temperature is equal to or less than the reactor inlet temperature (Tc); b. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is 10°F/hour; or c. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level 57%. 4. Primary coolant pumps P-50A and P-50B shall not be operated simultaneously. | ||
: 5. All SOC trains may not be in operation during planned heatup to MODE 4 when at least one PCS loop is in operation. | : 5. All SOC trains may not be in operation during planned heatup to MODE 4 when at least one PCS loop is in operation. | ||
------------------------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------------------ | ||
Line 721: | Line 721: | ||
Two Shutdown Cooling (SOC) trains shall be OPERABLE, and either: a. One SOC train in operation with 2810 gpm flow through the reactor core; or b. One SOC train in operation with 650 gpm flow through the reactor core with two of the three charging pumps incapable of reducing the boron concentration in the PCS below the minimum value necessary to the required SHUTDOWN MARGIN. -------------------------------------- | Two Shutdown Cooling (SOC) trains shall be OPERABLE, and either: a. One SOC train in operation with 2810 gpm flow through the reactor core; or b. One SOC train in operation with 650 gpm flow through the reactor core with two of the three charging pumps incapable of reducing the boron concentration in the PCS below the minimum value necessary to the required SHUTDOWN MARGIN. -------------------------------------- | ||
..... -----NOTES----------------------------------------- | ..... -----NOTES----------------------------------------- | ||
: 1. All SOC pumps may not be in operation for s: 1 hour provided: . a. No operations are permitted that would cause a reduction of the PCS boron concentration; | : 1. All SOC pumps may not be in operation for s: 1 hour provided: . a. No operations are permitted that would cause a reduction of the PCS boron concentration; | ||
: b. c. Core outlet temperature is maintained> | : b. c. Core outlet temperature is maintained> | ||
10°F below saturation temperature; and | 10°F below saturation temperature; and | ||
* No draining operations to further reduce the PCS water volume are permitted. | * No draining operations to further reduce the PCS water volume are permitted. | ||
: 2. One SOC train may be inoperable for s: 2 hours for surveillance testing provided the other SOC train is OPERABLE and in operation. | : 2. One SOC train may be inoperable for s: 2 hours for surveillance testing provided the other SOC train is OPERABLE and in operation. | ||
-MODE 5 with PCS loops not filled. Palisades Nuclear Plant 3.4.8-1 Amendment No. | -MODE 5 with PCS loops not filled. Palisades Nuclear Plant 3.4.8-1 Amendment No. | ||
Line 786: | Line 786: | ||
* 3.4 PRIMARY COOLANT SYSTEM (PCS) * | * 3.4 PRIMARY COOLANT SYSTEM (PCS) * | ||
* 3.4.12 Low Temperature Overpressure Protection (LTOP) System LCO 3.4:12 APPLICABILITY: | * 3.4.12 Low Temperature Overpressure Protection (LTOP) System LCO 3.4:12 APPLICABILITY: | ||
ACTIONS An L TOP System shall be OPERABLE with: a. Both High Pressure Safety Injection (HPSI) pumps incapable of injecting into the PCS, and ------------------------------------------NOTES--------------------------------------------. 1. LCO 3.4.12.a is only required when any PCS cold leg temperature is< 300°F. 2. LCO 3.4.12.a does not prohibit the use of the HPSI pumps for emergency addition of makeup to the PCS. b. One of the following pressure relief capabilities: | ACTIONS An L TOP System shall be OPERABLE with: a. Both High Pressure Safety Injection (HPSI) pumps incapable of injecting into the PCS, and ------------------------------------------NOTES--------------------------------------------. 1. LCO 3.4.12.a is only required when any PCS cold leg temperature is< 300°F. 2. LCO 3.4.12.a does not prohibit the use of the HPSI pumps for emergency addition of makeup to the PCS. b. One of the following pressure relief capabilities: | ||
: 1. 2. Two Power Operated Relief Valves (PORVs) with lift settings as specified in Figure 3.4.12-1; or The PCS depressurized and a PCS vent capable of 167 gpm at a pressure of 315 psia. MODE 3 when any PCS cold leg temperature is< 430°F, MODES 4 and 5, MODE 6 when the reactor vessel head is on. | : 1. 2. Two Power Operated Relief Valves (PORVs) with lift settings as specified in Figure 3.4.12-1; or The PCS depressurized and a PCS vent capable of 167 gpm at a pressure of 315 psia. MODE 3 when any PCS cold leg temperature is< 430°F, MODES 4 and 5, MODE 6 when the reactor vessel head is on. | ||
LCO 3.0.4 is not applicable. | LCO 3.0.4 is not applicable. | ||
Line 844: | Line 844: | ||
* 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.15 PCS Leakage Detection Instrumentation | * 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.15 PCS Leakage Detection Instrumentation | ||
* | * | ||
* LCO 3.4.15 Three of the following PCS leakage detection instrumentation channels shall be OPERABLE: | * LCO 3.4.15 Three of the following PCS leakage detection instrumentation channels shall be OPERABLE: | ||
: a. One containment sump level indicating channel; b. One containment atmosphere gaseous activity monitoring channel; c. One containment air cooler condensate level switch channel; d. One containment atm9sphere humidity monitoring channel. APPLICABILITI: | : a. One containment sump level indicating channel; b. One containment atmosphere gaseous activity monitoring channel; c. One containment air cooler condensate level switch channel; d. One containment atm9sphere humidity monitoring channel. APPLICABILITI: | ||
MODES 1, 2, 3, and 4. ACTIONS -----------------------------------------------------------NOTE---------------------------------------------------------- | MODES 1, 2, 3, and 4. ACTIONS -----------------------------------------------------------NOTE---------------------------------------------------------- | ||
Line 938: | Line 938: | ||
====3.6.1 FREQUENCY==== | ====3.6.1 FREQUENCY==== | ||
In accordance with the Containment Structural Integrity Surveillance Program -----------N | In accordance with the Containment Structural Integrity Surveillance Program -----------N | ||
()TE-------- | ()TE-------- | ||
Local leak rate tests shall be performed at SR 3.0.2 is not 55 psig. applicable. | Local leak rate tests shall be performed at SR 3.0.2 is not 55 psig. applicable. | ||
Line 946: | Line 946: | ||
* 3.6.2 Containment Air Locks LCO 3.6.2 Two containment air locks shall be OPERABLE. | * 3.6.2 Containment Air Locks LCO 3.6.2 Two containment air locks shall be OPERABLE. | ||
APPLICABILITY: | APPLICABILITY: | ||
MODES 1, 2, 3, and 4. ACTIONS | MODES 1, 2, 3, and 4. ACTIONS | ||
: 1. Entry and exit is permissible through a "locked" air lock door to perform repairs on the affected air lock components. | : 1. Entry and exit is permissible through a "locked" air lock door to perform repairs on the affected air lock components. | ||
: 2. Separate Condition entry is allowed for each air lock. 3. Enter applicable Conditions and Required Actions of LCO 3.6.1, "Containment," when leakage results in exceeding the overall containment leakage rate acceptance criteria. | : 2. Separate Condition entry is allowed for each air lock. 3. Enter applicable Conditions and Required Actions of LCO 3.6.1, "Containment," when leakage results in exceeding the overall containment leakage rate acceptance criteria. | ||
CONDITION A. .One or more containment air locks with one containment air lock door inoperable. | CONDITION A. .One or more containment air locks with one containment air lock door inoperable. | ||
Line 958: | Line 958: | ||
* Palisades Nuclear Plant REQUIRED ACTION A.2 Lock the OPERABLE door closed in the affected air lock. AND --------------------NOTE------------------ | * Palisades Nuclear Plant REQUIRED ACTION A.2 Lock the OPERABLE door closed in the affected air lock. AND --------------------NOTE------------------ | ||
Air lock doors in high radiation areas may be verified locked closed by administrative means. ---------------------------------------------- | Air lock doors in high radiation areas may be verified locked closed by administrative means. ---------------------------------------------- | ||
A.3 Verify the OPERABLE door is locked closed in the affected air lock . | A.3 Verify the OPERABLE door is locked closed in the affected air lock . | ||
: 1. | : 1. | ||
* Required Actions B.1, B.2, and B.3 are not applicable if both doors in the same air lock are inoperable and Condition C is entered. 2. Entry and exit of containment is permissible under the control of a dedicated in.dividual. | * Required Actions B.1, B.2, and B.3 are not applicable if both doors in the same air lock are inoperable and Condition C is entered. 2. Entry and exit of containment is permissible under the control of a dedicated in.dividual. | ||
Line 977: | Line 977: | ||
* SURVEILLANCE REQUIREMENTS | * SURVEILLANCE REQUIREMENTS | ||
* | * | ||
* SR 3.6.2.1 SURVEILLANCE | * SR 3.6.2.1 SURVEILLANCE | ||
: 1. An inoperable air lock door does not invalidate the previous successful performance of the overall air lock leakage test. 2. Results shall be evaluated against acceptance criteria of SR 3.6.1.3 in accordance with 10 CFR 50, Appendix J, as modified by approved exemptions. | : 1. An inoperable air lock door does not invalidate the previous successful performance of the overall air lock leakage test. 2. Results shall be evaluated against acceptance criteria of SR 3.6.1.3 in accordance with 10 CFR 50, Appendix J, as modified by approved exemptions. | ||
: 3. A seal contact check shall be performed on the emergency escape air lock following each full pressure test. Emergency escape air lock door opening, solely for the purpose of strongback removal and performance of the seal contact check, does not necessitate additional pressure testing. 4 . Local leak rate tests, other than personnel air lock doors between the seals test, shall be performed at 55 psig. | : 3. A seal contact check shall be performed on the emergency escape air lock following each full pressure test. Emergency escape air lock door opening, solely for the purpose of strongback removal and performance of the seal contact check, does not necessitate additional pressure testing. 4 . Local leak rate tests, other than personnel air lock doors between the seals test, shall be performed at 55 psig. | ||
* Perform required air lock leakage rate testing in accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions. | * Perform required air lock leakage rate testing in accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions. | ||
Line 986: | Line 986: | ||
Amendment No. | Amendment No. | ||
* | * | ||
* SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.6.2.1 (continued) | * SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.6.2.1 (continued) | ||
: b. For each personnel air lock door between the seals test, leakage rate is :s; 0.023 La when tested at 10.0 psig. c. An acceptable emergency escape air lock door seal contact check consists of a verification of continuous contact between the seals and the sealing surfaces. | : b. For each personnel air lock door between the seals test, leakage rate is :s; 0.023 La when tested at 10.0 psig. c. An acceptable emergency escape air lock door seal contact check consists of a verification of continuous contact between the seals and the sealing surfaces. | ||
Containment Air Locks 3.6.2 FREQUENCY SR 3.6.2.2 Verify only one door in the air lock can be opened 18 months at a time . Palisades Nuclear Plant 3.6.2-6 Amendment No. | Containment Air Locks 3.6.2 FREQUENCY SR 3.6.2.2 Verify only one door in the air lock can be opened 18 months at a time . Palisades Nuclear Plant 3.6.2-6 Amendment No. | ||
Line 993: | Line 993: | ||
APPLICABILITY: | APPLICABILITY: | ||
MODES 1, 2, 3, and 4. ACTIONS -----------------------------------------------------------NOTES-------------------------------------------------------- | MODES 1, 2, 3, and 4. ACTIONS -----------------------------------------------------------NOTES-------------------------------------------------------- | ||
: 1. Penetration flow paths, except for 8 inch purge exhaust valves and 12 inch air room supply valves penetration flow paths, may be unisolated intermittently under administrative controls. | : 1. Penetration flow paths, except for 8 inch purge exhaust valves and 12 inch air room supply valves penetration flow paths, may be unisolated intermittently under administrative controls. | ||
: 2. Separate Condition entry is allowed for each penetration flow path. 3. Enter applicable Conditions and Required Actions for system(s) made inoperable by containment isolation valves. 4. Enter applicable Conditions and Required Actions of LC() 3.6.1, "Containment," when leakage results in exceeding the overall containment leakage rate acceptance criteria. | : 2. Separate Condition entry is allowed for each penetration flow path. 3. Enter applicable Conditions and Required Actions for system(s) made inoperable by containment isolation valves. 4. Enter applicable Conditions and Required Actions of LC() 3.6.1, "Containment," when leakage results in exceeding the overall containment leakage rate acceptance criteria. | ||
CONDITION A. --------------NO"T"E------------- | CONDITION A. --------------NO"T"E------------- | ||
Line 1,119: | Line 1,119: | ||
* 3. 7 PLANT SYSTEMS * | * 3. 7 PLANT SYSTEMS * | ||
* 3.7.5 Auxiliary Feedwater (AFW) System LCO 3.7.5 APPLICABILITY: | * 3.7.5 Auxiliary Feedwater (AFW) System LCO 3.7.5 APPLICABILITY: | ||
ACTl()NS Two AFW trains shall be OPERABLE. | ACTl()NS Two AFW trains shall be OPERABLE. | ||
: 1. Only one AFW train, which includes a motor driven pump, is required to be OPERABLE in M()DE 4. 2. . The turbine driven AFW pump is only required to be ()PERABLE in MODES 1 and 2. 3. Two AFW pumps may* be placed in manual for testing, for a period of up to 4 hours. M()DES 1, 2, and 3, M()DE 4 when steam generator is relied upon for heat removal. C()NDITl()N REQUIRED ACTION C()MPLETl()N TIME A. ()ne steam supply to A. 1 turbine driven AFW pump inoperable in M()DE 1 or 2. Palisades Nuclear Plant Restore steam supply to 7 days OPERABLE status. 3.7.5-1 10 days from discovery of failure to meet the LC() Amendment No. | : 1. Only one AFW train, which includes a motor driven pump, is required to be OPERABLE in M()DE 4. 2. . The turbine driven AFW pump is only required to be ()PERABLE in MODES 1 and 2. 3. Two AFW pumps may* be placed in manual for testing, for a period of up to 4 hours. M()DES 1, 2, and 3, M()DE 4 when steam generator is relied upon for heat removal. C()NDITl()N REQUIRED ACTION C()MPLETl()N TIME A. ()ne steam supply to A. 1 turbine driven AFW pump inoperable in M()DE 1 or 2. Palisades Nuclear Plant Restore steam supply to 7 days OPERABLE status. 3.7.5-1 10 days from discovery of failure to meet the LC() Amendment No. | ||
* ACTIONS CONDITION B. One or more AFW trains inoperable for reasons other than Condition A in MODE 1,-2, or 3. AND At least 100% of required AFW fl.ow available to both steam generators. | * ACTIONS CONDITION B. One or more AFW trains inoperable for reasons other than Condition A in MODE 1,-2, or 3. AND At least 100% of required AFW fl.ow available to both steam generators. | ||
Line 1,257: | Line 1,257: | ||
* 3.8 ELECTRICAL POWER SYSTEMS * | * 3.8 ELECTRICAL POWER SYSTEMS * | ||
* 3.8.1 AC Sources -Operating LCO 3.8.1 APPLICABILITY: | * 3.8.1 AC Sources -Operating LCO 3.8.1 APPLICABILITY: | ||
ACTIONS The following AC electrical sources shall be OPERABLE: | ACTIONS The following AC electrical sources shall be OPERABLE: | ||
: a. Two qualified circuits between the offsite transmission network and the onsite Class 1 E AC Electrical Power Distribution System; and b. Two Diesel Generators (DGs) each capable of supplying one train of the onsite Class 1 E AC Electrical Power Distribution System. | : a. Two qualified circuits between the offsite transmission network and the onsite Class 1 E AC Electrical Power Distribution System; and b. Two Diesel Generators (DGs) each capable of supplying one train of the onsite Class 1 E AC Electrical Power Distribution System. | ||
* MODES 1, 2, 3, and 4. CONDITION REQUIRED ACTION COMPLETION TIME A. One offsite circuit inoperable. | * MODES 1, 2, 3, and 4. CONDITION REQUIRED ACTION COMPLETION TIME A. One offsite circuit inoperable. | ||
Line 1,291: | Line 1,291: | ||
====3.8.1 COMPLETION==== | ====3.8.1 COMPLETION==== | ||
TIME 6 hours 36 hours Immediately FREQUENCY 7 days SR Verify each DG starts from standby conditions and 31 days achieves: | TIME 6 hours 36 hours Immediately FREQUENCY 7 days SR Verify each DG starts from standby conditions and 31 days achieves: | ||
: a. In 10 seconds, ready-to-load status; and b., Steady state 2280 V and Palisades Nuclear Plant 2520 V, and 59.5 Hz and 61.2 Hz. 3.8.1-4 Amendment No. | : a. In 10 seconds, ready-to-load status; and b., Steady state 2280 V and Palisades Nuclear Plant 2520 V, and 59.5 Hz and 61.2 Hz. 3.8.1-4 Amendment No. | ||
* * * ( SURVEILLANCE REQUIREMENTS SR 3.8.1.3 SURVEILLANCE | * * * ( SURVEILLANCE REQUIREMENTS SR 3.8.1.3 SURVEILLANCE | ||
Line 1,324: | Line 1,324: | ||
This Surveillance shall not be performed in MODE 1, 2, 3, or4. Verify on an .actual or simulated loss of offsite power signal in conjunction with an actual or_. simulated. | This Surveillance shall not be performed in MODE 1, 2, 3, or4. Verify on an .actual or simulated loss of offsite power signal in conjunction with an actual or_. simulated. | ||
safety injection signal: a. De-energization of emergency buses; bi Load shedding from emergency buses; c. DG auto-starts from standby condition and: 1. | safety injection signal: a. De-energization of emergency buses; bi Load shedding from emergency buses; c. DG auto-starts from standby condition and: 1. | ||
* energizes permanently connected loads in 10 seconds, 2. energizes emergency loads through its automatic load sequencer, 3. achieves steady state voltage :::: 2280 V and 2520 V, 4. achieves steady state frequency | * energizes permanently connected loads in 10 seconds, 2. energizes emergency loads through its automatic load sequencer, 3. achieves steady state voltage :::: 2280 V and 2520 V, 4. achieves steady state frequency | ||
:::: 59.5 Hz and 61.2 Hz, and 5. supplies permanently connected loads for :::: 5 minutes . Palisades Nuclear Plant 3.8.1-8 18 months Amendment No. | :::: 59.5 Hz and 61.2 Hz, and 5. supplies permanently connected loads for :::: 5 minutes . Palisades Nuclear Plant 3.8.1-8 18 months Amendment No. | ||
* * | * * | ||
* AC Sources -Shutdown 3.8.2 3.8 ELECTRICAL POWER SYSTEMS 3.8.2 AC Sources -Shutdown LCO 3.8.2 APPLICABILITY: | * AC Sources -Shutdown 3.8.2 3.8 ELECTRICAL POWER SYSTEMS 3.8.2 AC Sources -Shutdown LCO 3.8.2 APPLICABILITY: | ||
ACTIONS The following AC electrical power sources shall be OPERABLE: | ACTIONS The following AC electrical power sources shall be OPERABLE: | ||
: a. One qualified circuit between the offsite transmission network and the onsite Class 1 E AC electrical power distribution subsystem(s) required by LCO 3.8.10, "Distribution Systems -Shutdown"; | : a. One qualified circuit between the offsite transmission network and the onsite Class 1 E AC electrical power distribution subsystem(s) required by LCO 3.8.10, "Distribution Systems -Shutdown"; | ||
and b. One Diesel Generator (DG) capable of supplying one train of the onsite Class 1 E AC electrical power distribution subsystem(s) required by LCO 3.8.10. MODES 5 and 6, During movement of irradiated fuel assemblies. | and b. One Diesel Generator (DG) capable of supplying one train of the onsite Class 1 E AC electrical power distribution subsystem(s) required by LCO 3.8.10. MODES 5 and 6, During movement of irradiated fuel assemblies. | ||
Line 1,538: | Line 1,538: | ||
One SOC train shall be OPERABLE and in operation. | One SOC train shall be OPERABLE and in operation. | ||
--------------------------------------------NOTES------------------------------------------ | --------------------------------------------NOTES------------------------------------------ | ||
: 1. The required SOC train may not be in operation for 1 hour per 8 hour period, provided no operations are permitted that would cause reduction of the Primary Coolant System boron concentration. | : 1. The required SOC train may not be in operation for 1 hour per 8 hour period, provided no operations are permitted that would cause reduction of the Primary Coolant System boron concentration. | ||
: 2. The required SOC train may be made inoperable for 2 hours per 8 hour period for testing or maintenance, provided one SOC train is in operation providing flow through the reactor core, and core outlet temperature is 200°F. MODE 6 with the refueling cavity water level 647 ft elevation. | : 2. The required SOC train may be made inoperable for 2 hours per 8 hour period for testing or maintenance, provided one SOC train is in operation providing flow through the reactor core, and core outlet temperature is 200°F. MODE 6 with the refueling cavity water level 647 ft elevation. | ||
* =AC=-T=l=O=N=S==============::::;=====================::::;============== | * =AC=-T=l=O=N=S==============::::;=====================::::;============== | ||
Line 1,588: | Line 1,588: | ||
Assemblies with enrichments above 3.27 weight percent U 235 must contain 216 rods which are either U0 2 , Gd 2 0 3-U0 2 or solid metal. The Region 11 fuel storage racks (See Figure B 3. 7 .16-1) are designed and shall be maintained with; a. Fuel assemblies having maximum enrichment of 3.27 weight percent; b. Kett s 0.95 if fully flooded with unborated water, which includes allowance for uncertainties as described in Section 9.11 of the FSAR. c. A nominal 9.17 inch center to center distance between fuel assemblies; and d. Partially spent fuel assemblies which meet the discharge burnup requirements of Table 3. 7.16-1. The new fuel storage racks are designed and shall be maintained with: a. Fuel assemblies having a maximum average planar U 235 enrichment of 4.20 weight percent; b. Kett s 0.95 when flooded with either full density or low density (optimum moderation) water including allowances for uncertainties as described in Section 9.11 of the FSAR. 4.0-2 Amendment No. | Assemblies with enrichments above 3.27 weight percent U 235 must contain 216 rods which are either U0 2 , Gd 2 0 3-U0 2 or solid metal. The Region 11 fuel storage racks (See Figure B 3. 7 .16-1) are designed and shall be maintained with; a. Fuel assemblies having maximum enrichment of 3.27 weight percent; b. Kett s 0.95 if fully flooded with unborated water, which includes allowance for uncertainties as described in Section 9.11 of the FSAR. c. A nominal 9.17 inch center to center distance between fuel assemblies; and d. Partially spent fuel assemblies which meet the discharge burnup requirements of Table 3. 7.16-1. The new fuel storage racks are designed and shall be maintained with: a. Fuel assemblies having a maximum average planar U 235 enrichment of 4.20 weight percent; b. Kett s 0.95 when flooded with either full density or low density (optimum moderation) water including allowances for uncertainties as described in Section 9.11 of the FSAR. 4.0-2 Amendment No. | ||
* | * | ||
* Design Features 4.0 4.0 DESIGN FEATURES 4.3 Fuel Storage 4.3.1 Criticality (continued) | * Design Features 4.0 4.0 DESIGN FEATURES 4.3 Fuel Storage 4.3.1 Criticality (continued) | ||
: c. Assemblies must contain 216 rods which are either U0 2 , Gd 2 0 3-U0 2 or solid metal. d. The pitch of the new fuel storage rack lattice 9.375 inches and every other position in the lattice being permanently occupied by an 8" x 8" structural steel or core plugs, resulting in a nominal 13.26 inch center to center distance between fuel assemblies placed in alternating storage locations. | : c. Assemblies must contain 216 rods which are either U0 2 , Gd 2 0 3-U0 2 or solid metal. d. The pitch of the new fuel storage rack lattice 9.375 inches and every other position in the lattice being permanently occupied by an 8" x 8" structural steel or core plugs, resulting in a nominal 13.26 inch center to center distance between fuel assemblies placed in alternating storage locations. | ||
4.3 Fuel Storage 4.3.2 4.3.3 Drainage The spent fuel storage pool cooling system suction and discharge piping is designed and shall be maintained to prevent inadvertent draining of the pool below elevation 644 ft 5 inches . Capacity The spent fuel storage pool and north tilt pit are designed and shall be maintained with a storage capacity limited to no more than 892 fuel assemblies. | 4.3 Fuel Storage 4.3.2 4.3.3 Drainage The spent fuel storage pool cooling system suction and discharge piping is designed and shall be maintained to prevent inadvertent draining of the pool below elevation 644 ft 5 inches . Capacity The spent fuel storage pool and north tilt pit are designed and shall be maintained with a storage capacity limited to no more than 892 fuel assemblies. | ||
Line 1,614: | Line 1,614: | ||
* 5.2 Organization | * 5.2 Organization | ||
** | ** | ||
* 5.2.2 Plant Staff (continued) | * 5.2.2 Plant Staff (continued) | ||
: c. Shift crew composition may be less than the minimum requirement of 1 O CFR 50.54(m)(2)(i), and 5.2.2.a and 5.2.2.g for a period of time not to exceed 2 hours in order to accommodate unexpected absence of on-duty shift crew members provided immediate action is taken to restore the shift crew composition to within the requirements. | : c. Shift crew composition may be less than the minimum requirement of 1 O CFR 50.54(m)(2)(i), and 5.2.2.a and 5.2.2.g for a period of time not to exceed 2 hours in order to accommodate unexpected absence of on-duty shift crew members provided immediate action is taken to restore the shift crew composition to within the requirements. | ||
: d. A radiation safety technician shall be on site when fuel is in the reactor. The position may be vacant for not more than 2 hours, in order to provide for unexpected absence, provided immediate action is taken to fill the required position. | : d. A radiation safety technician shall be on site when fuel is in the reactor. The position may be vacant for not more than 2 hours, in order to provide for unexpected absence, provided immediate action is taken to fill the required position. | ||
: e. Administrative procedures shall be developed and implemented to limit the working hours of plant staff who perform safety-related functions (e.g., licensed SROs, licensed ROs, radiation safety personnel, auxiliary operators, and key maintenance personnel). | : e. Administrative procedures shall be developed and implemented to limit the working hours of plant staff who perform safety-related functions (e.g., licensed SROs, licensed ROs, radiation safety personnel, auxiliary operators, and key maintenance personnel). | ||
In the event that overtime is used, the following guidelines shall be followed: | In the event that overtime is used, the following guidelines shall be followed: | ||
: 1. An individual should not be permitted to work more than 16 hours straight, excluding shift turnover time; 2. An individual should not be permitted to work more than 16 hours in any 24 hour period, nor more than 24. hours in any 48 hour period, nor more than 72 hours in any 7 day period, all excluding shift turnover time; 3. A break of at least 8 hours should be allowed between work periods, including shift turnover time; 4. Except during extended shutdown periods, the use of overtime should be considered on an individual basis and not for ttie entire staff on a shift. Any deviations from the overtime guidelines shall be authorized in advance by the plant superintendent or his designee, in accordance with approved administrative procedures, or by higher .levels of management, in accordance with established procedures and with documentation of the basis for granting* | : 1. An individual should not be permitted to work more than 16 hours straight, excluding shift turnover time; 2. An individual should not be permitted to work more than 16 hours in any 24 hour period, nor more than 24. hours in any 48 hour period, nor more than 72 hours in any 7 day period, all excluding shift turnover time; 3. A break of at least 8 hours should be allowed between work periods, including shift turnover time; 4. Except during extended shutdown periods, the use of overtime should be considered on an individual basis and not for ttie entire staff on a shift. Any deviations from the overtime guidelines shall be authorized in advance by the plant superintendent or his designee, in accordance with approved administrative procedures, or by higher .levels of management, in accordance with established procedures and with documentation of the basis for granting* | ||
the deviation. | the deviation. | ||
Line 1,627: | Line 1,627: | ||
* 5.2 Organization | * 5.2 Organization | ||
* | * | ||
* 5.2.2 Plant Staff (continued) | * 5.2.2 Plant Staff (continued) | ||
: f. The operations manager or an assistant operations manager shall hold an SRO license. The individual holding the SRO license shall be responsible for directing the activities of the licensed operators. | : f. The operations manager or an assistant operations manager shall hold an SRO license. The individual holding the SRO license shall be responsible for directing the activities of the licensed operators. | ||
: g. The Shift Technical Advisor (STA) shall provide advisory technical support to the Shift Supervisor (SS) in the areas of thermal hydraulics, reactor engineering, and plant analysis with regard to the safe operation of the plant. If either SRO on shift satisfies the Shift Engineer qualification requirements, then the STA does not need to be stationed . Palisades Nuclear Plant 5.0-4 Amendment No. | : g. The Shift Technical Advisor (STA) shall provide advisory technical support to the Shift Supervisor (SS) in the areas of thermal hydraulics, reactor engineering, and plant analysis with regard to the safe operation of the plant. If either SRO on shift satisfies the Shift Engineer qualification requirements, then the STA does not need to be stationed . Palisades Nuclear Plant 5.0-4 Amendment No. | ||
Plant Staff Qualifications 5.3 | Plant Staff Qualifications 5.3 | ||
Line 1,639: | Line 1,639: | ||
* 5.0 ADMINISTRATIVE CONTROLS 5.4 Procedures | * 5.0 ADMINISTRATIVE CONTROLS 5.4 Procedures | ||
* | * | ||
* 5.4.1 Written procedures shall be established, implemented, and maintained covering the activities referenced below: a. The applicable procedures recommended in of Regulatory Guide 1.33, . Revision 2, February 1978. b. The emergency operating procedures required to implement the requirements of NUREG-0737 and NUREG-0737, Supplement 1, as *stated in Generic Letter 82-33; c. Site Fire Protection Program implementation. | * 5.4.1 Written procedures shall be established, implemented, and maintained covering the activities referenced below: a. The applicable procedures recommended in of Regulatory Guide 1.33, . Revision 2, February 1978. b. The emergency operating procedures required to implement the requirements of NUREG-0737 and NUREG-0737, Supplement 1, as *stated in Generic Letter 82-33; c. Site Fire Protection Program implementation. | ||
: d. All programs specified in S!pecification 5.5 . Palisades Nuclear Plant 5.0-6 Amendment No. | : d. All programs specified in S!pecification 5.5 . Palisades Nuclear Plant 5.0-6 Amendment No. | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
Line 1,647: | Line 1,647: | ||
====5.5.1 Offsite==== | ====5.5.1 Offsite==== | ||
Dose Calculation Manual (ODCM) a. The ODCM shall contain the methodology and parameters used in the calculation of offsite doses resulting from radioactive gaseous and liquid effluents, in the calculation of gaseous and liquid effluent monitoring alarm and trip setpoints, and in the conduct of the radiological environmental monitoring program; and b. The ODCM shall also contain (1) the radioactive effluent controls and radiological environmental monitoring activities and (2) descriptions of the information that should be included in the Radiological Environmental Operating Report, and Radioactive Effluent Release Report required by Specification 5.6.2 and Specification 5.6.3. c. Changes to ODCM: 1 . Shall be documented and records of reviews performed shall be retained. | Dose Calculation Manual (ODCM) a. The ODCM shall contain the methodology and parameters used in the calculation of offsite doses resulting from radioactive gaseous and liquid effluents, in the calculation of gaseous and liquid effluent monitoring alarm and trip setpoints, and in the conduct of the radiological environmental monitoring program; and b. The ODCM shall also contain (1) the radioactive effluent controls and radiological environmental monitoring activities and (2) descriptions of the information that should be included in the Radiological Environmental Operating Report, and Radioactive Effluent Release Report required by Specification 5.6.2 and Specification 5.6.3. c. Changes to ODCM: 1 . Shall be documented and records of reviews performed shall be retained. | ||
This documentation shall contain: a. Sufficient information to support the change together with the appropriate analyses or evaluations justifying the changes, and b. A determination that the change will maintain the level of radioactive effluent control required by 10 CFR 20.1302, 40 CFR 190, 10 CFR 50.36a, and 10 CFR 50, Appendix I, and not adversely impact the accuracy or reliability of effluent, dose, or setpoint calculations. | This documentation shall contain: a. Sufficient information to support the change together with the appropriate analyses or evaluations justifying the changes, and b. A determination that the change will maintain the level of radioactive effluent control required by 10 CFR 20.1302, 40 CFR 190, 10 CFR 50.36a, and 10 CFR 50, Appendix I, and not adversely impact the accuracy or reliability of effluent, dose, or setpoint calculations. | ||
: 2. Shall become effective after approval by the plant superintendent. | : 2. Shall become effective after approval by the plant superintendent. | ||
: 3. Shall be submitted to the NRC in the form of a complete, legible copy of the entire ODCM as a part of or concurrent with the Radioactive Effluent Release Report for the period of the report in which any change to the ODCM was made. Each change shall be identified by markings in the margin of the affected pages, clearly indicating the area of the page that was changed, and shall indicate the date (e.g., month/year) the change was implemented . Palisades Nuclear Plant 5.0-7 Amendment No. | : 3. Shall be submitted to the NRC in the form of a complete, legible copy of the entire ODCM as a part of or concurrent with the Radioactive Effluent Release Report for the period of the report in which any change to the ODCM was made. Each change shall be identified by markings in the margin of the affected pages, clearly indicating the area of the page that was changed, and shall indicate the date (e.g., month/year) the change was implemented . Palisades Nuclear Plant 5.0-7 Amendment No. | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals * | * 5.5 Programs and Manuals * | ||
* 5.5.2 Primary Coolant Sources Outside Containment This program provides controls to minimize leakage to the engineered safeguards rooms, from those portions of systems outside containment that could contain highly radioactive fluids during a serious transient or accident, to as low as practical. | * 5.5.2 Primary Coolant Sources Outside Containment This program provides controls to minimize leakage to the engineered safeguards rooms, from those portions of systems outside containment that could contain highly radioactive fluids during a serious transient or accident, to as low as practical. | ||
The systems include the Containment Spray System, the Safety Injection System, the Shutdown Cooling System, and the containment sump suction piping. This program shall include the following: | The systems include the Containment Spray System, the Safety Injection System, the Shutdown Cooling System, and the containment sump suction piping. This program shall include the following: | ||
: a. Provisions establishing preventive maintenance and periodic visual inspection requirements, and b. Integrated leak test requirements for each system at a frequency not to exceed refueling cycle intervals. | : a. Provisions establishing preventive maintenance and periodic visual inspection requirements, and b. Integrated leak test requirements for each system at a frequency not to exceed refueling cycle intervals. | ||
: c. The portion of the shutdown cooling system that is outside the containment shall be tested either by use in normal operation or hydrostatically tested at 255 psig. d. Piping from valves CV-3029 and CV-3030 to the discharge of the safety injection pumps and containment spray pumps shall be hydrostatically tested at no less than 100 psig. | : c. The portion of the shutdown cooling system that is outside the containment shall be tested either by use in normal operation or hydrostatically tested at 255 psig. d. Piping from valves CV-3029 and CV-3030 to the discharge of the safety injection pumps and containment spray pumps shall be hydrostatically tested at no less than 100 psig. | ||
* e. The maximum allowable leakage from the recirculation heat removal systems' components (which include valve stems, flanges and pump seals) shall not exceed 0.2 gallon per minute under the normal hydrostatic head from the SIRW tank (approximately 44 psig). 5.5.3 Post Accident Sampling Program This program provides controls which will ensure the capability to accurately determine the airborne iodine concentration in vital areas and which will ensure the capability to obtain and analyze reactor coolant, radioactive gases and particulates in plant gaseous effluents, and containment atmosphere samples under accident conditions. | * e. The maximum allowable leakage from the recirculation heat removal systems' components (which include valve stems, flanges and pump seals) shall not exceed 0.2 gallon per minute under the normal hydrostatic head from the SIRW tank (approximately 44 psig). 5.5.3 Post Accident Sampling Program This program provides controls which will ensure the capability to accurately determine the airborne iodine concentration in vital areas and which will ensure the capability to obtain and analyze reactor coolant, radioactive gases and particulates in plant gaseous effluents, and containment atmosphere samples under accident conditions. | ||
This program shall include the following: | This program shall include the following: | ||
: a. Training of personnel, b. Procedures for sampling and analysis, and c. Provisions for maintenance of sampling and analytic equipment. | : a. Training of personnel, b. Procedures for sampling and analysis, and c. Provisions for maintenance of sampling and analytic equipment. | ||
Palisades Nuclear Plant 5.0-8 Amendment No. | Palisades Nuclear Plant 5.0-8 Amendment No. | ||
Line 1,664: | Line 1,664: | ||
* 5.5.4 Radioactive Effluent Controls Program A program shall be provided conforming with 10 CFR 50.36a for the control of radioactive effluents and for maintaining the doses to members of the public from radioactive effluents as low as reasonably achievable. | * 5.5.4 Radioactive Effluent Controls Program A program shall be provided conforming with 10 CFR 50.36a for the control of radioactive effluents and for maintaining the doses to members of the public from radioactive effluents as low as reasonably achievable. | ||
The program (1) shall be contained in the Offsite Dose Calculation Manual (ODCM), (2) shall be implemented by operating procedures, and (3) shall include remedial actions to be taken whenever the program limits are exceeded. | The program (1) shall be contained in the Offsite Dose Calculation Manual (ODCM), (2) shall be implemented by operating procedures, and (3) shall include remedial actions to be taken whenever the program limits are exceeded. | ||
The program shall include the following elements: | The program shall include the following elements: | ||
: a. Limitations on the functional capability of radioactive liquid and gaseous monitoring instrumentation including surveillance tests and setpoint determination in accordance with the methodology in the ODCM, b. Limitations on the concentrations of radioactive material released in liquid effluents to unrestricted areas conforming to 10 times the value in c. d. e. f. g. h. 1 O CFR 20, Appendix B, Table 2, Column 2. Monitoring, sampling, and analysis of radioactive liquid and gaseous effluents in accordance with 10 CFR 20.1302 and with the methodology and parameters in the ODCM, Limitation on the annual and quarterly doses or dose commitment to a member of the public from radioactive materials in liquid effluents released from each plant to unrestricted areas conforming to 10 CFR 50, Appendix I, Limitations on the dose rate resulting from radioactive material released in gaseous effluents to areas beyond the site boundary conforming to the doses associated with 10 times the value listed in 10 CFR 20, Appendix B, Table 2, Column 1. Limitations on the annual and quarterly air doses resulting from noble gases released in gaseous effluents from each unit to areas beyond the site boundary conforming to 10 CFR 50, Appendix I, Limitations on the annual and quarterly doses to a member of the public from lodine-131, lodine-133, tritium and all radionuclides in particulate form with half-lives greater than 8 days in gaseous effluents released from each plant to areas beyond the site boundary conforming to 10 CFR 50, Appendix I, Limitations on the annual doses or dose commitment to any member of the public due to releases of radioactivity and to radiation from uranium fuel cycle sources conforming to 40 CFR 190 . ' . Palisades Nuclear Plant 5.0-9 Amendment No. | : a. Limitations on the functional capability of radioactive liquid and gaseous monitoring instrumentation including surveillance tests and setpoint determination in accordance with the methodology in the ODCM, b. Limitations on the concentrations of radioactive material released in liquid effluents to unrestricted areas conforming to 10 times the value in c. d. e. f. g. h. 1 O CFR 20, Appendix B, Table 2, Column 2. Monitoring, sampling, and analysis of radioactive liquid and gaseous effluents in accordance with 10 CFR 20.1302 and with the methodology and parameters in the ODCM, Limitation on the annual and quarterly doses or dose commitment to a member of the public from radioactive materials in liquid effluents released from each plant to unrestricted areas conforming to 10 CFR 50, Appendix I, Limitations on the dose rate resulting from radioactive material released in gaseous effluents to areas beyond the site boundary conforming to the doses associated with 10 times the value listed in 10 CFR 20, Appendix B, Table 2, Column 1. Limitations on the annual and quarterly air doses resulting from noble gases released in gaseous effluents from each unit to areas beyond the site boundary conforming to 10 CFR 50, Appendix I, Limitations on the annual and quarterly doses to a member of the public from lodine-131, lodine-133, tritium and all radionuclides in particulate form with half-lives greater than 8 days in gaseous effluents released from each plant to areas beyond the site boundary conforming to 10 CFR 50, Appendix I, Limitations on the annual doses or dose commitment to any member of the public due to releases of radioactivity and to radiation from uranium fuel cycle sources conforming to 40 CFR 190 . ' . Palisades Nuclear Plant 5.0-9 Amendment No. | ||
* * | * * | ||
Line 1,674: | Line 1,674: | ||
* 5.5 Programs and Manuals ** | * 5.5 Programs and Manuals ** | ||
* 5.5.7 lnservice Testing Program This program provides controls for inservice testing of ASME Code Class 1, 2, and 3 components.* | * 5.5.7 lnservice Testing Program This program provides controls for inservice testing of ASME Code Class 1, 2, and 3 components.* | ||
The program shall include the following: | The program shall include the following: | ||
: a. Testing frequencies specified in Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda (B&PV Code) as follows: B&PV Code terminology for inservice testing activities Weekly Monthly , Quarterly or every 3 months . Semiannually or every 6 months Every 9 months Yearly or annually | : a. Testing frequencies specified in Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda (B&PV Code) as follows: B&PV Code terminology for inservice testing activities Weekly Monthly , Quarterly or every 3 months . Semiannually or every 6 months Every 9 months Yearly or annually | ||
* Biennially or every 2 years Required interval for performing inservice testing activities | * Biennially or every 2 years Required interval for performing inservice testing activities | ||
::; 7 days .:> 31 days .:> 92 days .:> 184 days .:> 276 days ::; 366 days .:> 731 days b. The provisions of SR 3.0.2 are applicable to the above required intervals for performing inservice testing activities; | ::; 7 days .:> 31 days .:> 92 days .:> 184 days .:> 276 days ::; 366 days .:> 731 days b. The provisions of SR 3.0.2 are applicable to the above required intervals for performing inservice testing activities; | ||
: c. The provisions of SR 3.0.3 are applicable to inservice testing activities; and d. Nothing in the B&PV Code shall be construed to supersede the requirements of any Technical Specification. | : c. The provisions of SR 3.0.3 are applicable to inservice testing activities; and d. Nothing in the B&PV Code shall be construed to supersede the requirements of any Technical Specification. | ||
Line 1,688: | Line 1,688: | ||
* 5.5.8 Steam Generator Tube Surveillance Program a. Steam Generator Tube Sample Selection and Inspection (continued) | * 5.5.8 Steam Generator Tube Surveillance Program a. Steam Generator Tube Sample Selection and Inspection (continued) | ||
The SG tube minimum sample size, inspection result classification, and the corresponding action required shall be as specified in Table 5.5.8-1. The tubes selected for each inservice inspection shall include at least 3% of the total number of tubes in all SGs; the tubes selected for these inspections shall be selected on a random basis except: 1. Where experience in similar plants with similar water chemistry indicates critical areas to be inspected, then at least 50% of the tubes inspected shall be from these critical areas. 2. The first sample of tubes selected for each inservice of each SG shall include: a) All nonplugged tubes that previously had detectable wall b) penetrations greater than 20%. | The SG tube minimum sample size, inspection result classification, and the corresponding action required shall be as specified in Table 5.5.8-1. The tubes selected for each inservice inspection shall include at least 3% of the total number of tubes in all SGs; the tubes selected for these inspections shall be selected on a random basis except: 1. Where experience in similar plants with similar water chemistry indicates critical areas to be inspected, then at least 50% of the tubes inspected shall be from these critical areas. 2. The first sample of tubes selected for each inservice of each SG shall include: a) All nonplugged tubes that previously had detectable wall b) penetrations greater than 20%. | ||
* Tubes in those areas where experience has indicated potential problems . c) A tube inspection shall be performed on each selected tube. If any selected tuqe does not permit the passage of the eddy current probe for a tube inspection, this shall be recorded and an adjacent tube shall be selected and subjected to a tube inspection. | * Tubes in those areas where experience has indicated potential problems . c) A tube inspection shall be performed on each selected tube. If any selected tuqe does not permit the passage of the eddy current probe for a tube inspection, this shall be recorded and an adjacent tube shall be selected and subjected to a tube inspection. | ||
: 3. The tubes selected as the second and third samples (if required by Table 5.5.8-1) during each inservice inspection may be subjected to a partial tube inspection provided: | : 3. The tubes selected as the second and third samples (if required by Table 5.5.8-1) during each inservice inspection may be subjected to a partial tube inspection provided: | ||
Palisades Nuclear Plant a) The tubes selected for these samples include the tubes from those areas of the tube sheet array where tubes with imperfections were previously found. b) The inspections include those portions of the tubes where | Palisades Nuclear Plant a) The tubes selected for these samples include the tubes from those areas of the tube sheet array where tubes with imperfections were previously found. b) The inspections include those portions of the tubes where | ||
Line 1,694: | Line 1,694: | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals * | * 5.5 Programs and Manuals * | ||
* 5.5.8 Steam Generator Tube Surveillance Program *a. Steam Generator Tube Sample Selection and Inspection (continued) | * 5.5.8 Steam Generator Tube Surveillance Program *a. Steam Generator Tube Sample Selection and Inspection (continued) | ||
: 4. The re.suits of each sample inspection shall be classified into one of the following three categories: | : 4. The re.suits of each sample inspection shall be classified into one of the following three categories: | ||
Category C-1 C-2 C-3 NOTE: Inspection Results* Less than 5% of the total.tubes inspected are degraded tubes and none of the inspected tubes are defective. | Category C-1 C-2 C-3 NOTE: Inspection Results* Less than 5% of the total.tubes inspected are degraded tubes and none of the inspected tubes are defective. | ||
One or more tubes, but not more than 1 % of the total tubes inspected are defective, or between 5% and 10% of the total tubes inspected are degraded tubes. More than 10% of the total tubes inspected are degraded tubes or more than 1 % of the inspected tubes are defective. | One or more tubes, but not more than 1 % of the total tubes inspected are defective, or between 5% and 10% of the total tubes inspected are degraded tubes. More than 10% of the total tubes inspected are degraded tubes or more than 1 % of the inspected tubes are defective. | ||
* In all inspections, previously degraded tubes must exhibit significant (greater than 10%) further wall penetrations to be included in the above percentage calculations. | * In all inspections, previously degraded tubes must exhibit significant (greater than 10%) further wall penetrations to be included in the above percentage calculations. | ||
: b. Inspection FreguenCies The above required inservice inspection of SG tubes shall be performed at the following frequencies: | : b. Inspection FreguenCies The above required inservice inspection of SG tubes shall be performed at the following frequencies: | ||
: 1. lnservice inspections shall be performed at intervals of not less than 12 nor more than 24 calendar months after the previous inspection. | : 1. lnservice inspections shall be performed at intervals of not less than 12 nor more than 24 calendar months after the previous inspection. | ||
If two consecutive inspections following service under Avr conditions, not including the preservice inspection, result in all inspections results falling into the C-1 category or if two consecutive inspections demonstrate that previously observed degradation has not continued and no additional degradation has occurred, the inspection interval may be extended to a maximum of once per 40 months . Palisades Nuclear Plant 5.0-13 Amendment No. | If two consecutive inspections following service under Avr conditions, not including the preservice inspection, result in all inspections results falling into the C-1 category or if two consecutive inspections demonstrate that previously observed degradation has not continued and no additional degradation has occurred, the inspection interval may be extended to a maximum of once per 40 months . Palisades Nuclear Plant 5.0-13 Amendment No. | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals * | * 5.5 Programs and Manuals * | ||
* 5.5.8 Steam Generator Tube Surveillance Program b. Inspection Frequencies (continued) | * 5.5.8 Steam Generator Tube Surveillance Program b. Inspection Frequencies (continued) | ||
: 2. If the results of the inservice inspection of a SG conducted in accordance with Table 5.5.8-1 at 40 month intervals fall into Category C-3, the inspection frequency shall be increased to at least once per 20 months. The increase in inspection frequency shall apply until the subsequent inspections satisfy the criteria of Specification 5.5.8.b.1; the interval may then be extended to a maximum of once per 40 months. 3. Additional, unscheduled inservice inspections shall be performed on each SG in accordance with the first sample inspection specified in Table 5.5.8-1 during the shutdown subsequent to any of the following conditions: | : 2. If the results of the inservice inspection of a SG conducted in accordance with Table 5.5.8-1 at 40 month intervals fall into Category C-3, the inspection frequency shall be increased to at least once per 20 months. The increase in inspection frequency shall apply until the subsequent inspections satisfy the criteria of Specification 5.5.8.b.1; the interval may then be extended to a maximum of once per 40 months. 3. Additional, unscheduled inservice inspections shall be performed on each SG in accordance with the first sample inspection specified in Table 5.5.8-1 during the shutdown subsequent to any of the following conditions: | ||
a) Primary-to-secondary tube leaks (not including leaks originating from tube-to-tube sheet welds) in exce$S of the limits of LCO 3.4.13. b) A seismic occurrence greater than the Operating Basis | a) Primary-to-secondary tube leaks (not including leaks originating from tube-to-tube sheet welds) in exce$S of the limits of LCO 3.4.13. b) A seismic occurrence greater than the Operating Basis | ||
Line 1,720: | Line 1,720: | ||
f) Plugging Limit means the imperfection depth at or beyond which the tube shall be removed from service and is equal to 40% of the nominal tube wall thickness. | f) Plugging Limit means the imperfection depth at or beyond which the tube shall be removed from service and is equal to 40% of the nominal tube wall thickness. | ||
g) Unserviceable described the condition of a tube if it leaks or contains a defect large enough to affect its structural integrity in the event of an Operating Basis Earthquake, a loss-of-coolant accident, or a steam line or feedwater line break as specified in 5.5.8.b.3, above . h) Tube Inspection means an inspection of the SG tube from the point of entry (hot leg side) completely around the U-bend to the top support of the cold leg. i) Preservice Inspection means an inspection of the full length of each tube in SG performed by eddy current techniques prior to service to establish a baseline condition of the tubing. This inspection shall be performed | g) Unserviceable described the condition of a tube if it leaks or contains a defect large enough to affect its structural integrity in the event of an Operating Basis Earthquake, a loss-of-coolant accident, or a steam line or feedwater line break as specified in 5.5.8.b.3, above . h) Tube Inspection means an inspection of the SG tube from the point of entry (hot leg side) completely around the U-bend to the top support of the cold leg. i) Preservice Inspection means an inspection of the full length of each tube in SG performed by eddy current techniques prior to service to establish a baseline condition of the tubing. This inspection shall be performed | ||
* after the shop hydrostatic test and prior to initial POWER OPERATION using the equipment and techniques expected to be used during subsequent inspections. | * after the shop hydrostatic test and prior to initial POWER OPERATION using the equipment and techniques expected to be used during subsequent inspections. | ||
: 2. The SG shall be determined OPERABLE after completing the corresponding actions (plug all tubes exceeding the plugging limit and all tubes containing through-wall cracks) required by Table 5.5.8-1. The provisions of SR 3.0.2 are applicable to the Steam Generator Tube Surveillance Program . Palisades Nuclear Plant 5.0-15 Amendment No. | : 2. The SG shall be determined OPERABLE after completing the corresponding actions (plug all tubes exceeding the plugging limit and all tubes containing through-wall cracks) required by Table 5.5.8-1. The provisions of SR 3.0.2 are applicable to the Steam Generator Tube Surveillance Program . Palisades Nuclear Plant 5.0-15 Amendment No. | ||
* * | * * | ||
Line 1,730: | Line 1,730: | ||
Ventilation System V-BA or V-88 V-BA and V-88 V-95 orV-96 Flowrate (CFM) 7300 +/- 20% 10,000 +/- 20% 12,500 +/- 10% Palisades Nuclear Plant 5.0-17 Amendment No. | Ventilation System V-BA or V-88 V-BA and V-88 V-95 orV-96 Flowrate (CFM) 7300 +/- 20% 10,000 +/- 20% 12,500 +/- 10% Palisades Nuclear Plant 5.0-17 Amendment No. | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals *-* 5.5.10 Ventilation Filter Testing Program (continued) | * 5.5 Programs and Manuals *-* 5.5.10 Ventilation Filter Testing Program (continued) | ||
: b. , I Demonstrate for each of the ventilation systems that an inplace test of the charcoal adsorber shows a penetration and system bypass< 0.05% for the CRV and< 1.00% for the Fuel Handling Area Ventilation System when tested in accordance with RG 1.52 and ASME N510-1989. | : b. , I Demonstrate for each of the ventilation systems that an inplace test of the charcoal adsorber shows a penetration and system bypass< 0.05% for the CRV and< 1.00% for the Fuel Handling Area Ventilation System when tested in accordance with RG 1.52 and ASME N510-1989. | ||
Ventilation System V-8A and V-88 V-26A and V-268 Flowrate (CFM) 10,000 +/- 20% 3200 +10% -5% c. Demonstrate for each of the ventilation systems that a laboratory test of a sample of the charcoal adsorber, when obtained as described in RG 1.52 shows the methyl iodide penetration less than the value specified below when tested in accordance with ASTM D3803-1989 at a temperature of d. 30°C and equal to the relative humidity specified as follows: Ventilation System VF-66 VFC-26A and VFC-268 Penetration 6.00% -0.157% Relative Humidity 95% 70%. For each of the ventilation systems, demonstrate the pressure drop across the combined HEPA filters, the prefilters, and the charcoal adsorbers is less than the value specified below when tested in accordance with RG 1.52 and ASME N510-1989: | Ventilation System V-8A and V-88 V-26A and V-268 Flowrate (CFM) 10,000 +/- 20% 3200 +10% -5% c. Demonstrate for each of the ventilation systems that a laboratory test of a sample of the charcoal adsorber, when obtained as described in RG 1.52 shows the methyl iodide penetration less than the value specified below when tested in accordance with ASTM D3803-1989 at a temperature of d. 30°C and equal to the relative humidity specified as follows: Ventilation System VF-66 VFC-26A and VFC-268 Penetration 6.00% -0.157% Relative Humidity 95% 70%. For each of the ventilation systems, demonstrate the pressure drop across the combined HEPA filters, the prefilters, and the charcoal adsorbers is less than the value specified below when tested in accordance with RG 1.52 and ASME N510-1989: | ||
Line 1,741: | Line 1,741: | ||
* 5.5.11 5.5.12 Fuel Oil Testing Program A fuel oil testing program to implement required testing of both new fuel oil and stored fuel oil shall be established. | * 5.5.11 5.5.12 Fuel Oil Testing Program A fuel oil testing program to implement required testing of both new fuel oil and stored fuel oil shall be established. | ||
The program shall include sampling requirements, testing requirements, and acceptance criteria, based on the diesel manufacturer's specifications and applicable ASTM Standards. | The program shall include sampling requirements, testing requirements, and acceptance criteria, based on the diesel manufacturer's specifications and applicable ASTM Standards. | ||
The program shall establish the following: | The program shall establish the following: | ||
: a. Acceptability of new fuel oil prior to addition to the Fuel Oil Storage Tank, and acceptability of fuel oil stored in the Fuel Oil Storage Tank, by determining that the fuel oil has the following properties within limits: 1. API gravity or an absolute specific gravity, 2.. Kinematic viscosity, and 3. Water and sediment content. b. Other properties of fuel oil stored in the Fuel Oil Storage Tank, specified by the diesel manufacturers or specified for grade 20 fuel oil in ASTM D 975, are within limits . The provisions of SR 3 .. 0.2 and SR 3.0.3 are applicable to the Fuel Oil Testing Program. Technical Specifications | : a. Acceptability of new fuel oil prior to addition to the Fuel Oil Storage Tank, and acceptability of fuel oil stored in the Fuel Oil Storage Tank, by determining that the fuel oil has the following properties within limits: 1. API gravity or an absolute specific gravity, 2.. Kinematic viscosity, and 3. Water and sediment content. b. Other properties of fuel oil stored in the Fuel Oil Storage Tank, specified by the diesel manufacturers or specified for grade 20 fuel oil in ASTM D 975, are within limits . The provisions of SR 3 .. 0.2 and SR 3.0.3 are applicable to the Fuel Oil Testing Program. Technical Specifications | ||
'(TS) Bases Control Program This. program provides a means for processing changes to the Bases of these. Technical Specifications. | '(TS) Bases Control Program This. program provides a means for processing changes to the Bases of these. Technical Specifications. | ||
: a. Changes to the Bases of the TS shall be made under appropriate administrative controls and reviews. b. Licensees may make changes to Bases without prior NRC approval . provided the changes do not involve either of the following: | : a. Changes to the Bases of the TS shall be made under appropriate administrative controls and reviews. b. Licensees may make changes to Bases without prior NRC approval . provided the changes do not involve either of the following: | ||
: 1. A change in the TS incorporated in the license; or 2. A change to the updated FSAR or Bases that involves an unreviewed safety question as defined in 10 CFR 50.59 . Palisades Nuclear Plant 5.0-19 Amendment No. | : 1. A change in the TS incorporated in the license; or 2. A change to the updated FSAR or Bases that involves an unreviewed safety question as defined in 10 CFR 50.59 . Palisades Nuclear Plant 5.0-19 Amendment No. | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals * | * 5.5 Programs and Manuals * | ||
* 5.5.12 5.5.13 Technical Specifications (TS) Bases Control Program (continued) | * 5.5.12 5.5.13 Technical Specifications (TS) Bases Control Program (continued) | ||
: c. The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the FSAR. d. Proposed changes that meet the criteria of Specification 5.5.12.b. | : c. The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the FSAR. d. Proposed changes that meet the criteria of Specification 5.5.12.b. | ||
above shall be reviewed and approved by the NRC prior to implementation. | above shall be reviewed and approved by the NRC prior to implementation. | ||
Changes to the Bases implemented without prior NRC approval shall be provided to the NRC on a frequency consistent with 10 CFR 50.71 (e). -Safety Functions Determination Program (SFDP) This program ensures loss of safety function is detected and appropriate actions taken. Upon entry into LCO 3.0.6, an evaluation shall be made to determine. | Changes to the Bases implemented without prior NRC approval shall be provided to the NRC on a frequency consistent with 10 CFR 50.71 (e). -Safety Functions Determination Program (SFDP) This program ensures loss of safety function is detected and appropriate actions taken. Upon entry into LCO 3.0.6, an evaluation shall be made to determine. | ||
if loss of safety function exists. Additionally, other appropriate limitations and remedial or compensatory actions may be identified to be taken as a result of the support system inoperability and corresponding exception to entering supported system Condition and Required Actions. This program implements the requirements of LCO 3.0.6. The SFDP shall contain the following: | if loss of safety function exists. Additionally, other appropriate limitations and remedial or compensatory actions may be identified to be taken as a result of the support system inoperability and corresponding exception to entering supported system Condition and Required Actions. This program implements the requirements of LCO 3.0.6. The SFDP shall contain the following: | ||
: a. Provisions for cross train checks to ensure a loss of the capability to perform the safety function assumed in the accident analysis does not go undetected; | : a. Provisions for cross train checks to ensure a loss of the capability to perform the safety function assumed in the accident analysis does not go undetected; | ||
: b. Provisions for ensuring the plant is maintained in a safe condition if a loss of function condition exists; c. | : b. Provisions for ensuring the plant is maintained in a safe condition if a loss of function condition exists; c. | ||
* Provisio.ns to ensure that an inoperable supported system's Completion Time is not inappropriately extended as a result of multiple support system inoperabilities; and d. Other appropriate limitations and remedial or compensatory actions. A loss of safety function exists when, assuming no concurrent single failure, a safety function assumed in the accident analysis cannot be performed. | * Provisio.ns to ensure that an inoperable supported system's Completion Time is not inappropriately extended as a result of multiple support system inoperabilities; and d. Other appropriate limitations and remedial or compensatory actions. A loss of safety function exists when, assuming no concurrent single failure, a safety function assumed in the accident analysis cannot be performed. | ||
Line 1,759: | Line 1,759: | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals * | * 5.5 Programs and Manuals * | ||
* 5.5.13 5.5.14 Safety Functions Determination Program (SFDP) (continued) | * 5.5.13 5.5.14 Safety Functions Determination Program (SFDP) (continued) | ||
: c. A required system redundant to support system(s) for the supported systems (a) and (b) above is also inoperable. | : c. A required system redundant to support system(s) for the supported systems (a) and (b) above is also inoperable. | ||
The SFDP identifies where a loss of safety function exists. If a loss of safety function is determined to exist by this program, the appropriate Conditions and Required Actions of the LCO in which the loss of safety function exists are required to be entered. Containment Leak Rate Testing Program Programs shall be established to implement the leak rate testing of the containment as required by 10 CFR 50.54(0) and 10 CFR 50, Appendix J, Option B, as modified by approved exemptions. | The SFDP identifies where a loss of safety function exists. If a loss of safety function is determined to exist by this program, the appropriate Conditions and Required Actions of the LCO in which the loss of safety function exists are required to be entered. Containment Leak Rate Testing Program Programs shall be established to implement the leak rate testing of the containment as required by 10 CFR 50.54(0) and 10 CFR 50, Appendix J, Option B, as modified by approved exemptions. | ||
Line 1,772: | Line 1,772: | ||
Programs and Manuals 5.5 | Programs and Manuals 5.5 | ||
* 5.5 Programs and Manuals * | * 5.5 Programs and Manuals * | ||
* 5.5.15 Process Control Program (continued) b) A determination that the change will maintain the overall conformance of the solidified waste product to existing requirements of Federal, State, or other applicable regulations. | * 5.5.15 Process Control Program (continued) b) A determination that the change will maintain the overall conformance of the solidified waste product to existing requirements of Federal, State, or other applicable regulations. | ||
: 2. Shall become effective after approval by the plant superintendent. | : 2. Shall become effective after approval by the plant superintendent. | ||
Palisades Nuclear Plant 5.0-23 Amendment No. | Palisades Nuclear Plant 5.0-23 Amendment No. | ||
* * | * * | ||
* Reporting Requirements 5.6 5.0 ADMINISTRATIVE CONTROLS . 5.6 Reporting Requirements The following reports shall be submitted in accordance with 1 O CFR 50.4 .. 5.6.1 Occupational Radiation Exposure Report 5.6.2 This report shall include a tabulation on an annual basis of the number of stations, utility and other personnel (including contractors), for whom monitoring was performed, receiving an annual deep dose equivalent greater than 100 mrem and the associated deep dose equivalent (reported in person-rem) according to work and job functions (e.g., reactor operations and surveillance, inservice inspection, routine maintenance, special maintenance | * Reporting Requirements 5.6 5.0 ADMINISTRATIVE CONTROLS . 5.6 Reporting Requirements The following reports shall be submitted in accordance with 1 O CFR 50.4 .. 5.6.1 Occupational Radiation Exposure Report 5.6.2 This report shall include a tabulation on an annual basis of the number of stations, utility and other personnel (including contractors), for whom monitoring was performed, receiving an annual deep dose equivalent greater than 100 mrem and the associated deep dose equivalent (reported in person-rem) according to work and job functions (e.g., reactor operations and surveillance, inservice inspection, routine maintenance, special maintenance | ||
[describe maintenance], waste processing and refueling). | [describe maintenance], waste processing and refueling). | ||
This tabulation supplements the requirements of 10 CFR 20.2206. The dose assignments to various duty functions may be estimated based OM pocket ionization chamber, electronic dosimeter, TLD, or film badge measurements. | This tabulation supplements the requirements of 10 CFR 20.2206. The dose assignments to various duty functions may be estimated based OM pocket ionization chamber, electronic dosimeter, TLD, or film badge measurements. | ||
Line 1,785: | Line 1,785: | ||
'---Reporting Requirements 5.6 *. 5.6 Reporting Requirements | '---Reporting Requirements 5.6 *. 5.6 Reporting Requirements | ||
* | * | ||
* 5.6.4 Monthly Operating Report Routine reports of operating statistics and shutdown experience shall be submitted on a monthly basis to the NRC no later than the fifteenth of each month following the calendar month covered by the report. 5.6.5 CORE OPERATING LIMITS REPORT (COLR) a. Core operating limits shall be established prior to each reload cycle, or prior to 'any remaining portion of a reload cycle, and shall be documented in the COLR for the following: | * 5.6.4 Monthly Operating Report Routine reports of operating statistics and shutdown experience shall be submitted on a monthly basis to the NRC no later than the fifteenth of each month following the calendar month covered by the report. 5.6.5 CORE OPERATING LIMITS REPORT (COLR) a. Core operating limits shall be established prior to each reload cycle, or prior to 'any remaining portion of a reload cycle, and shall be documented in the COLR for the following: | ||
: b. 3.1.1 Shutdown Margin 3.1.6 Regulating Rod Group Position Limits 3.2.1 Linear Heat Rate Limits 3.2.2 Radial Peaking Factor Limits 3.2.4 ASI Limits . The analytical methods used to determine the core operating limits shall be those approved by the NRC, specifically those described in the latest approved revision of the following documents: | : b. 3.1.1 Shutdown Margin 3.1.6 Regulating Rod Group Position Limits 3.2.1 Linear Heat Rate Limits 3.2.2 Radial Peaking Factor Limits 3.2.4 ASI Limits . The analytical methods used to determine the core operating limits shall be those approved by the NRC, specifically those described in the latest approved revision of the following documents: | ||
: 1. XN-75-27(A), "Exxon Nuclear Neutronics Design Methods for Pressurized Water Reactors," and Supplements 1 (A), 2(A), 3(P)(A), 4(P)(A), and 5(P)(A); Exxon Nuclear Company. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 2. ANF-84-73(P)(A), "Advanced Nuclear Fuels Methodology for Pressurized Water Reactors: | : 1. XN-75-27(A), "Exxon Nuclear Neutronics Design Methods for Pressurized Water Reactors," and Supplements 1 (A), 2(A), 3(P)(A), 4(P)(A), and 5(P)(A); Exxon Nuclear Company. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 2. ANF-84-73(P)(A), "Advanced Nuclear Fuels Methodology for Pressurized Water Reactors: | ||
Analysis of Chapter 15 Events," and Appendix B(P)(A) and Supplements 1 (P)(A), 2(P)(A); Advanced Nuclear Fuels Corporation. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 3. XN-NF-82-21 (P)(A), "Application of Exxon Nuclear Company PWR Thermal Margin Methodology to Mixed Core Configurations," Exxon Nuclear Company. (LCOs 3.2.1, 3.2.2, & 3.2.4) 4. ANF-84-093(P)(A), "Steamline Break Methodology for PWRs," and Supplement 1 (P)(A); Advanced Nuclear Fuels Corporation. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) . Palisades Nuclear Plant 5.0-25 Amendment No. | Analysis of Chapter 15 Events," and Appendix B(P)(A) and Supplements 1 (P)(A), 2(P)(A); Advanced Nuclear Fuels Corporation. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 3. XN-NF-82-21 (P)(A), "Application of Exxon Nuclear Company PWR Thermal Margin Methodology to Mixed Core Configurations," Exxon Nuclear Company. (LCOs 3.2.1, 3.2.2, & 3.2.4) 4. ANF-84-093(P)(A), "Steamline Break Methodology for PWRs," and Supplement 1 (P)(A); Advanced Nuclear Fuels Corporation. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) . Palisades Nuclear Plant 5.0-25 Amendment No. | ||
Line 1,792: | Line 1,792: | ||
* 5.6 Reporting Requirements | * 5.6 Reporting Requirements | ||
* | * | ||
* 5.6.5 CORE OPERATING LIMITS REPORT (COLR) (continued) | * 5.6.5 CORE OPERATING LIMITS REPORT (COLR) (continued) | ||
: 5. XN-75-32(P)(A), "Computational Procedure for Evaluating Fuel Rod Bowing," and Supplements 1 (P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. (LCOs 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 6. EXEM PWR Large Break LOCA Model as defined by: (LCOs 3.1.6, 3.2.1, & 3.2.2) a) XN-NF-82-20(A), "Exxon Nuclear Company Evaluation Model EXEM/PWR ECCS Model Updates," and Supplements 1 (P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. | : 5. XN-75-32(P)(A), "Computational Procedure for Evaluating Fuel Rod Bowing," and Supplements 1 (P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. (LCOs 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 6. EXEM PWR Large Break LOCA Model as defined by: (LCOs 3.1.6, 3.2.1, & 3.2.2) a) XN-NF-82-20(A), "Exxon Nuclear Company Evaluation Model EXEM/PWR ECCS Model Updates," and Supplements 1 (P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. | ||
* b) XN-NF-82-0?(P)(A), "Exxon Nuclear Company ECCS Cladding Swelling and Rupture Model," Exxon Nuclear Company. c) XN-NF-81-58(A), "RODEX2 Fuel Rod Thermal-Mechanical Response Evaluation Model," and Supplements.1(P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. d) XN-NF-85-16(A), "PWR 17x17 Fuel Cooling Tests Program," Volume 1 and Supplements 1 (P)(A), 2(P)(A), and 3(P)(A), and Volume 2 and Supplement 1 (P)(A); Exxon Nuclear Company. e) XN-NF-85-105(A), "Scaling of FCTF Based Reflood Heat Transfer Correlation for other Bundle Designs," and Supplement 1 (P)(A); Exxon Nuclear Company. 7. XN-NF-78-44(A), "A Generic Analysis of the Control Rod Ejection Transient for Pressurized Water Reactors," Exxon Nuclear Company. (LCOs 3.1.6, 3.2.1, & 3:2.2) 8. ANF-1224(P)(A), "Departure from Nucleate Boiling Correlation for High Thermal Performance Fuel," and Supplement 1 (P)(A); Advanced Nuclear Fuels Corporation. | * b) XN-NF-82-0?(P)(A), "Exxon Nuclear Company ECCS Cladding Swelling and Rupture Model," Exxon Nuclear Company. c) XN-NF-81-58(A), "RODEX2 Fuel Rod Thermal-Mechanical Response Evaluation Model," and Supplements.1(P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. d) XN-NF-85-16(A), "PWR 17x17 Fuel Cooling Tests Program," Volume 1 and Supplements 1 (P)(A), 2(P)(A), and 3(P)(A), and Volume 2 and Supplement 1 (P)(A); Exxon Nuclear Company. e) XN-NF-85-105(A), "Scaling of FCTF Based Reflood Heat Transfer Correlation for other Bundle Designs," and Supplement 1 (P)(A); Exxon Nuclear Company. 7. XN-NF-78-44(A), "A Generic Analysis of the Control Rod Ejection Transient for Pressurized Water Reactors," Exxon Nuclear Company. (LCOs 3.1.6, 3.2.1, & 3:2.2) 8. ANF-1224(P)(A), "Departure from Nucleate Boiling Correlation for High Thermal Performance Fuel," and Supplement 1 (P)(A); Advanced Nuclear Fuels Corporation. | ||
: 9. Palisades Nuclear Plant (LCOs 3.2.1, 3.2.2, & 3.2.4) ANF-89-151 (P)(A), "ANF-RELAP Methodology for Pressurized Water Reactors: | : 9. Palisades Nuclear Plant (LCOs 3.2.1, 3.2.2, & 3.2.4) ANF-89-151 (P)(A), "ANF-RELAP Methodology for Pressurized Water Reactors: | ||
Analysis of Non-LOCA Chapter 15 Events," Advanced Nuclear Fuels Corporation. (LCOs 3.1.(3, 3.2.1, 3.2.2, & 3.2.4) 5.0-26 Amendment No. | Analysis of Non-LOCA Chapter 15 Events," Advanced Nuclear Fuels Corporation. (LCOs 3.1.(3, 3.2.1, 3.2.2, & 3.2.4) 5.0-26 Amendment No. | ||
Line 1,804: | Line 1,804: | ||
* 5.6 Reporting Requirements | * 5.6 Reporting Requirements | ||
** | ** | ||
* 5.6.8 Steam Generator Tube Surveillance Report (continued) | * 5.6.8 Steam Generator Tube Surveillance Report (continued) | ||
: b. The complete results of the steam generator tube inservice inspection shall be reported to the Commission within 12 months following completion of the inspection. | : b. The complete results of the steam generator tube inservice inspection shall be reported to the Commission within 12 months following completion of the inspection. | ||
This report shalt include: 1. Number and extent of tubes inspected. | This report shalt include: 1. Number and extent of tubes inspected. | ||
: 2. Location and percent of wall-thickness penetration for each indication of an imperfection. | : 2. Location and percent of wall-thickness penetration for each indication of an imperfection. | ||
: 3. Identification of tubes plugged. c. Results of steam generator t4be inspections that fall into Category C-3 shall require 24 hour verbal notification to the NRC prior to resumption of plant operation. | : 3. Identification of tubes plugged. c. Results of steam generator t4be inspections that fall into Category C-3 shall require 24 hour verbal notification to the NRC prior to resumption of plant operation. | ||
A written followup within the next 30 days shall provide a description of investigations and corrective measures taken to prevent recurrence . Palisades Nuclear Plant 5.0-28 Amendment No. | A written followup within the next 30 days shall provide a description of investigations and corrective measures taken to prevent recurrence . Palisades Nuclear Plant 5.0-28 Amendment No. | ||
High Radiation Area 5.7 | High Radiation Area 5.7 | ||
* 5.0 ADMINISTRATIVE CONTROLS 5. 7 High Radiation Area * | * 5.0 ADMINISTRATIVE CONTROLS 5. 7 High Radiation Area * | ||
* L_ ___ _ 5. 7.1 Pursuant to 10 CFR 20, paragraph 20.1601(c), in lieu of the requirements of 10 CFR 20.1601, each high radiation area, as defined in 10 CFR 20, in which the intensity of radiation is > 100 mrem/hr but < 1000 mrem/hr, shall be barricaded and conspicuously posted as a high radiation area arid entrance thereto shall be controlled by requiring issuance of a Radiation Work Permit (RWP). Individuals qualified in radiation protection procedures (e.g., radiation safety technicians) or personnel continuously escorted by such individuals may be exempt from the RWP issuance requirement during the performance of their assigned duties in high radiation areas with exposure rates < 1000 mrem/hr, provided they are otherwise following plant radiation protection procedures for entry into such high radiation areas. Any individual or group of individuals permitted to enter such areas shall be provided with or accompanied by one or more of the following: | * L_ ___ _ 5. 7.1 Pursuant to 10 CFR 20, paragraph 20.1601(c), in lieu of the requirements of 10 CFR 20.1601, each high radiation area, as defined in 10 CFR 20, in which the intensity of radiation is > 100 mrem/hr but < 1000 mrem/hr, shall be barricaded and conspicuously posted as a high radiation area arid entrance thereto shall be controlled by requiring issuance of a Radiation Work Permit (RWP). Individuals qualified in radiation protection procedures (e.g., radiation safety technicians) or personnel continuously escorted by such individuals may be exempt from the RWP issuance requirement during the performance of their assigned duties in high radiation areas with exposure rates < 1000 mrem/hr, provided they are otherwise following plant radiation protection procedures for entry into such high radiation areas. Any individual or group of individuals permitted to enter such areas shall be provided with or accompanied by one or more of the following: | ||
: a. A radiation monitoring device that continuously indicates the radiation dose rate in the area. b. A radiation monitoring device that continuously integrates the radiation dose rate in the area and alarms when a preset integrated dose is received. | : a. A radiation monitoring device that continuously indicates the radiation dose rate in the area. b. A radiation monitoring device that continuously integrates the radiation dose rate in the area and alarms when a preset integrated dose is received. | ||
Entry into such areas with this monitoring device may be made after the dose rate levels in the area have been established and personnel are aware of them. c. An individual qualified in radiation protection procedures with a radiation dose rate monitoring device, who is responsible for providing positive | Entry into such areas with this monitoring device may be made after the dose rate levels in the area have been established and personnel are aware of them. c. An individual qualified in radiation protection procedures with a radiation dose rate monitoring device, who is responsible for providing positive |
Revision as of 20:20, 25 April 2019
ML18066A650 | |
Person / Time | |
---|---|
Site: | Palisades ![]() |
Issue date: | 09/17/1999 |
From: | CONSUMERS ENERGY CO. (FORMERLY CONSUMERS POWER CO.) |
To: | |
Shared Package | |
ML18066A649 | List: |
References | |
NUDOCS 9909230082 | |
Download: ML18066A650 (261) | |
Text
ENCLOSURE 1 CONSUMERS ENERGY COMPANY . PALISADES PLANT DOCKET 50-255 CONVERSION TO IMPROVED TECHNICAL SPECIFICATIONS IMPROVED TECHNICAL SPECIFICATIONS CLEAN PAGES 1.0 USE AND APPLICATION
1.1 Definitions
Definitions 1.1 The defined terms of this section appear in capitalized type and are applicable throughout these Technical Specifications and Bases. ACTIONS ASSEMBLY RADIAL PEAKING FACTOR (FRA) AVERAGE DISINTEGRATION ENERGY-E AXIAL OFFSET (AO) AXIAL SHAPE INDEX (ASI) Palisades Nuclear Plant Definition ACTIONS shall be that part of a Specification that prescribes Required Actions to be taken under designated Conditions within specified Completion Times. FRA shall be the maximum ratio of the individual.fuel assembly power to the core average fuel assembly power i.ntegrated over the total core height, including tilt E shall be the average (weighted in proportion to the concentration of each radionuclide in the primary coolant at the time of sampling) of the sum of the average beta and
- gamma energies per disintegration (in MeV) for isotopes,
- other than iodines, with half lives > 15 minutes, making up at least 95% of the total noniodine activity in the coolant. AO shall be the power generated in the lower half of the core less the power generated in the upper half of the core, divided by the sum of the power generated in the lower and upper halves of the core (determ'ined using the incore monitoring system). ASI shall be the power generated in the lower half of the core less the power generated in the upper half of the core, ' ' , ***: divided by the sum of the power generated in the lower and upper halves of the core (determined using the excore monitoring system). 1.1-1 Amendment No.
- *
- 1.1 Definitions CHANNEL CALIBRATION CHANNEL CHECK Definitions 1.1 A CHANNEL CALIBRATION shall be the adjustment, as . necessary, of the channel output such that it responds within the necessary range and accuracy to known values of the parameter that the channel monitors.
The CHANNEL. CALIBRATION shall encompass all devices in the channel required for channel OPERABILITY and the CHANNEL FUNCTIONAL TEST. Calibration of instrument channels with Resistance Temperature Detector (RTD) or thermocouple sensors may consist of an inplace qualitative assessment of sensor . behavior and normal calibration of the remaining adjustable devices in the channel. Whenever a RTD*or thermocouple sensing element is replaced, the next required CHANNEL CALIBRATION shall include an inplace cross calibration that compares the other sensing elements with the recently installed sensing element. The CHANNEL CALIBRATION may be performed by means of any series of sequential, overlapping, or total channel steps.
- A CHANNEL CHECK shall be the qualitative assessment, by observation, of channel behavior during operation.
This determination shall include, where possible, comparison of the channel indication and status to other indications or status derived from independent instrument channels measuring the same parameter.
CHANNEL FUNCTIONAL TEST A CHANNEL FUNCTIONAL TEST shall be: Palisades Nuclear Plant a. Analog and bistable channels -the injection of a simulated or actual signal into the channel as close to the sensor as practicable to verify OPERABILITY, of all devices in the channel required for channel OPERABILITY; 1.1-2 Amendment No.
- *
- 1.1 Definitions Definitions
1.1 CHANNEL
FUNCTIONAL TEST b. Digital channels -the use of diagnostic programs to test (continued) digital hardware and the injection of simulated process . data into the channel to verify OPERABILITY, of all devices in the channel required for channel OPERABILITY.
CORE AL TERA TION CORE OPERATING LIMITS REPORT (COLR) DOSE EQUIVALENT 1-131 LEAKAGE Palisades Nuclear Plant The CHANNEL FUNCTIONAL .TEST may be performed by means of any series of sequential, overlapping, or total channel steps so that the entire channel is tested. CORE ALTERATION shall be the movement of any fuel, sources, or control rods within the reactor vessel with the vessel head removed and fuel in the vessel. Suspension of CORE AL TERA TIONS shall not preclude completion of movement of a component to a safe position.
The COLR is the plant specific document that provides cycle specific parameter limits for the current reload cycle. These cycle specific parameter limits shall be determined for each reload cycle in accordance with Specification
5.6.5. Plant
operation within these limits is addressed in individual
- Specifications.
DOSE EQUIVALENT 1-131 shall be that concentration of 1-131 (microcuries/gram) that alone would produce the same thyroid dose as the quantity and isotopic mixture of 1-131, 1-132, 1-133, 1-134, and 1-135 actually present. The thyroid dose conversion factors used for this calculation shall be those listed in Table Ill of TID-14844, AEC, 1962, "Calculation of Distance Factors for Power and Test Reactor Sites." LEAKAGE shall be: a. Identified LEAKAGE 1. LEAKAGE, such as that from pump seals or valve packing (except Primary Coolant Pump seal water leakoff), that is captured and conducted to collection systems or a sump or collecting tank; 1.1-3 Amendment No. ..-----*.
- ,' "
- 1.1 Definitions LEAKAGE
- MODE OPERABLE -OPERABILITY
- Palisades Nuclear Plant a. Identified LEAKAGE (continued)
Definitions 1.1 2. LEAKAGE into the containment atmosphere from sources that are both specifically located and known not to interfere with the operation of leakage detection systems and not to be pressure boundary LEAKAGE; and 3. Primary Coolant System (PCS) LEAKAGE through a Steam Generator (SG) to the Secondary System. b. Unidentified LEAKAGE All LEAKAGE (e?<cept Primary Coolant Pump seal leakoff) that is not identified LEAKAGE; c. Pressure Boundary LEAKAGE LEAKAGE (except SG LEAKAGE) through a nonisolable fault in an PCS component body, pipe wall, or vessel wall. A MODE shall correspond to any one inclusive combination of core reactivity condition, power level, average primary coolant temperature, and reactor vessel head closure bolt I tensioning specified in Table 1.1-1 with fuel in the reactor vessel. A system, subsystem, train, component, or device shall be OPERABLE or have OPERABILITY when it is capable of performing its specified safety function(s) and when all necessary attendant instrumentation, controls, normal or emergency electrical power, cooling and seal water, lubrication, and other auxiliary equipment that are required for the system, subsystem, train, component, or device to perform its specified safety function(s) are also capable of performing their related support function(s) . 1.1-4 Amendment No.
- **
- 1.1 Definitions PHYSICS TESTS QUADRANT POWER TILT (Tq) RA TED THERMAL POWER (RTP) REFUELING BORON CONCENTRATION Definitions
1.1 PHYSICS
TESTS shall be those tests performed to measure the fundamental nuclear characteristics of the reactor core and related instrumentation.
These tests are: a. Described in Chapter 13, Initial Tests and Operation, of the FSAR; b. Authorized under the provisions of 10 CFR 50.59; or c. Otherwise approved by the Nuclear Regulatory Commission.
Tq shall be the maximum positive ratio of the power generated in any quadrant minus the average quadrant power, to the average quadrant power. RTP shall be a total reactor core heat transfer rate to the primary coolant of 2530 Mwt. REFUELING BORON CONCENTRATION shall be a Primary Coolant System boron concentration of 1720 ppm and sufficient to assure the reactor is subcriti.cal by 5% t.P with all control rods withdrawn.
- *
- SHUTDOWN MARGIN (SOM) SOM shall be the instantaneous amount of reactivity by which the reactor is subcritical or would be subcritical from its present condition assuming:
Palisades Nuclear Plant a. All full length control rods (shutdown and regulating) are fully inserted except for the single rod of highest reactivity worth, which is assumed to be fully withdrawn.
However, with all full length control rods verified fully inserted by two independent means, it is not necessary to account for a stuck rod in the SOM calculation.
With any full length control rods not capable of being fully inserted, the reactivity worth of these rods must be accounted for in the determination of SOM; and b. There is no change in part length rod position . 1.1-5 Amendment No.
- 1.1 Definitions STAGGERED TEST BASIS THERMAL POWER TOTAL RADIAL PEAKING FACTOR (FRT) Palisades Nuclear Plant Definitions 1.1 A STAGGERED TEST BASIS shall consist of the testing of one of the systems, subsystems, channels, or other designated components during the interval specified by the Surveillance Frequency, so that all systems, subsystems; channels, or other designated components are tested during n Surveillance Frequency intervals, where n is the total number of systems, subsystems, channels, or other designated components in the associated function.
THERMAL POWER shall be the total reactor core heat transfer rate to the primary coolant. FR T shall be the maximum product of the ratio of the individual fuel pin power to the core average pin power integrated over the total core height, including tilt. 1.1-6 Amendment No.
- *
- MODE TITLE 1 Power Operation 2 Startup 3 Hot Standby 4 Hot Shutdown'bJ 5 Cold Shutdown'bl 6 Refueling<cJ (a) Excluding decay heat. Table 1.1-1(page1of1)
MODES -----------% RATED REACTIVITY THERMAL CONDITION POWER(a) {keff) 2 0.99 >5 2 0.99 5 < 0.99 NA < 0.99 NA < 0.99 NA NA NA (b) All reactor vessel head closure bolts fully tensioned.
Definitions
1.1 AVERAGE
PRIMARY COOLANT TEMPERATURE (oF) NA NA 2 300 300 >Tave> 200 200 NA (c) One or more reactor vessel head closure bolts less than fully tensioned . Palisades Nuclear Plant 1.1-7 Amendment No.
1.0 USE AND APPLICATION Logical Connectors 1.2
- 1.2 Logical Connectors PURPOSE BACKGROUND
- Palisades Nuclear Plant The purpose of this section is to explain the meaning of logical connectors.
- Logical connectors are used in Technical Specifications (TS) to discriminate between, and yet connect, discrete Conditions, Required Actions, Completion Times, Surveillances, and Frequencies.
The only logical connectors that appear in TS are AND and OR. The physical arrangement of the.se connectors.
constitutes logical conventions with specific meanings.
Several levels of logic may be used to state Required Actions. These levels are identified by the placement (or nesting) of the logical connectors and by the number assigned to each Required Action. The first level of logic is identified by the first digit of the number assigned to a Required Action and the placement of the logical connector in the first level of nesting (i.e., left justified with the number of the Required.
Action). The successive levels of logic are identified by additional digits of the Required Action n.umber and by successive indentions of the logical connectors . When logical connectors are used to state a Condition, Completion Time, Surveillance, or Frequency, only the first level of logic is used, and the logical connector is left justified with the statement of the Condition, Completion Time, Surveillance, or Frequency.
1.2-1 Amendment No. i I
- *
- Logical Connectors 1.2 1.2 Logical Connectors EXAMPLES Palisades Nuclear Plant The following examples illustrate the use of logical connectors.
EXAMPLE 1.2-1 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. LCO not met. A.1 Verify ... A.2 Restore ... In this example the logical connector AND is used to indicate that when in Condition A, both Required Actions A.1 and A.2 must be completed . 1.2-2 Amendment No.
Logical Connectors 1.2
- 1.2 Logical Connectors
- EXAMPLES (continued)
Palisades Nuclear Plant EXAMPLE 1.2-2 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. LCO not met. A.1 Trip ... A.2.1 Verify ... A.2.2.1 Reduce ... A.2.2.2 Perform ... OR A.3 Align ... This example represents a more complicated use of logical connectors.'
Required Actions A.1, A.2, and A.3 are alternative choices, only one of which must be performed as indicated by the use of the logical connector OR and the left justified placement.
Any one of these three Actions may be chosen. If A.2 is chosen, then both A.2.1 and A.2.2 must be performed as indicated by the logical connector AND. Required Action A.2.2 is met by performing A.2.2.1 or A.2.2.2. The indented position of the logical connector OR indicates that A.2.2.1 and A.2.2.2 are alternative choices, only one of which must be performed . 1.2-3 Amendment No.
- *
- Completion Times 1.3 1.0 USE AND APPLICATION
1.3 Completion
Times PURPOSE BACKGROUND DESCRIPTION The purpose of this section is to establish the Completion Time convention and to provide guidance for its use. Limiting Conditions for Operation (LCOs) specify minimum requirements for ensuring safe operation of the plant. The ACTIONS associated with an LCO state Conditions that typically describe the ways in which the requirements of the LCO can fail to be met. Specified with each stated Condition are Required Action(s) and Completion Time(s). The Completion Time is the arnount of time allowed for completing a Required Action. It is referenced to the time of discovery of a situation (e.g., inoperable equipment or variable not within limits) that requires entering an ACTIONS Condition unless otherwise specified, providing the plant is in a MODE or specified condition stated in the Applicability of the LCO. Required Actions must be completed prior to the expiration of the specified Completion Time. An ACTIONS Condition remains in effect and
- the Required Actions apply until the Condition no longer exists or the plant is not within the LCO Applicability.
If situations are discovered that require entry into more than one Condition at a time within a single LCO (multiple Conditions), the. Required Actions for each Condition must be performed within the associated Completion Time. When in multiple Conditions, separate Completion Times are tracked for each Condition starting from the time of discovery of the situation that required entry into the Condition.
Once a Condition has been entered, subsequent trains, subsystems, components, or variables expressed in the Condition, discovered to be inoperable or not within limits, will not result in separate entry into the Condition, unless specifically stated. The Required Actions of the Condition continue to apply to each additional failure, with Completion Times based on initial entry into the Condition . Palisades Nuclear Plant 1.3-1 Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times DESCRIPTION (continued)
However, when a subsequent train, subsystem, component, or variable expressed in the Condition is discovered to be inoperable or not within limits, the Completion Time(s) may be extended.
To apply this Completion Time extension, two criteria must first be met. The subsequent inoperability:
- a. Must exist concurrent with the first inoperability; and b. Must remain inoperable or not within limits after the first inoperability is resolved.
The total Completion Time allowed for completing a Required Action to address the subsequent inoperability shall be limited to the more restrictive of either: a. The stated Completion Time, as measured from the initial entry into the Condition, plus an additional 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />; or b. The stated Completion Time as measured from discovery of the subsequent inoperability.
The above Completion Time extensions do not apply to those Specifications that have exceptions that allow completely separate re-entry into the Condition (for each train, subsystem, component, or variable expressed in the Condition) and separate tracking of Completion Times based on this re-entry.
These exceptions are stated in individual Specifications.
The above Compietion Time extension does not apply to a Completion Time with a modified "time zero." This modified "time zero" may be expressed as a repetitive time (i.e., "once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br />," where the Completion Time is referenced from a previous completion of the Required Action versus the time of Condition entry) or as a time modified by the phrase "from discovery
... " Example 1.3-3 illustrates one use of this type of Completion Time. The 1 O day Completion Time specified for Conditions A and B in Example 1.3-3 may not be extended . Palisades Nuclear Plant 1.3-2 Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times EXAMPLES The following examples illustrate the use of Completion Times with different types of Conditions and changing Conditions.
EXAMPLE 1.3-1 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME B. Required 8: 1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Action and associated AND Completion Time not met. B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Condition B has two Required Actions. Each Required Action has its own separate Completion Time. Each Completion Time is referenced to the time that Condition B is entered.
- The Required Actions of Condition B are to be in MODE 3 within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> AND in MODE 5 within 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br />. A total of 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> is allowed for reaching MODE 3 and a total of 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> (not 42 hours4.861111e-4 days <br />0.0117 hours <br />6.944444e-5 weeks <br />1.5981e-5 months <br />) is allowed for reaching MODE 5 from the time that Condition B was entered. If MODE 3 is reached within 3 hours3.472222e-5 days <br />8.333333e-4 hours <br />4.960317e-6 weeks <br />1.1415e-6 months <br />,* the time allowed for reaching MODE 5 is the next 33 hours3.819444e-4 days <br />0.00917 hours <br />5.456349e-5 weeks <br />1.25565e-5 months <br /> because the total time allowed for reaching MODE 5 is 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br />.
- _If Condition B is entered while in MODE 3, the time allowed for reaching MODE 5 is the next 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> . Palisades Nuclear Plant 1.3-3 Amendment No.
I i I 1. I *
- Completion Times 1.3 1.3 Completion Times EXAMPLES (continued)
EXAMPLE 1.3-2 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One pump A.1 Restore pump to 7 days inoperable.
OPERABLE status. B. Required B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Action and associated .AND* Completion Time not met. B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> When a pump is declared inoperable, Condition A is entered. If the pump is not restored to OPERABLE status within 7 days, Condition B is also entered and the Completion Time clocks for Required Actions B.1 and B.2 start. If the inoperable pump is restored to OPERABLE status after Condition B is entered, Condition A and B are exited, and therefore, the Required Actions of Condition B may be terminated.
When a second pump is declared inoperable while the first pump is still inoperable, Condition A is not re-entered for the second pump. LCO 3.0.3 is entered, since the ACTIONS do not include a Condition for more than one inoperable pump. The Completion Time *clock for Condition A does not stop after LCO 3.0.3 is entered, but continues to be tracked from the time Condition A was initially entered. While in LCO .3.0.3, if one of the inoperable pumps is restored to OPERABLE status and the Completion Time for Condition A has not expired, LCO 3.0.3 may be exited and operation continued in accordance with Condition A. While in LCO 3.0.3, if one of the inoperable pumps is restored to OPERABLE status and the Completion Time for Condition A has expired, LCO 3.0.3 may be exited and operation continued in accordance with Condition B . Palisades Nuclear Plant 1.3-4 Amendment No.
- **
- Completion Times 1.3 1.3 Completion Times EXAMPLES EXAMPLE 1.3-2 (continued)
The Completion Time for Condition B is tracked from the time the Condition A Completion Time expired. On restoring one of the pumps to OPERABLE status, the Condition A Completion Time is not reset, but continues from the time the first pump was declared inoperable.
This Completion Time may be extended if the pump restored to OPERABLE status was the first inoperable pump. A 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> extension to the stated 7 days is allowed, provided this does not result in the second pump being inoperable for > 7 days . Palisades Nuclear Plant 1.3-5 Amendment No.
- *
- 1.3 Completion Times EXAMPLES (continued)
EXAMPLE 1.3-3 ACTIONS CONDITION A. One Function X train inoperable.
B. One Function Y train inoperable.
C. One Function X train inoperable.
- AND One* Function Y train inoperable . Palisades Nuclear Plant REQUIRED ACTION A.1 Restore Function X train to OPERABLE status. B.1 Restore Function Y train to OPERABLE status. C.1 Restore Function X train to OPERABLE status. OR C.2 Restore Function Y train to OPERABLE status. 1.3-6 Completion Times 1.3 COMPLETION TIME 7 days AND 10 days from discovery of failure to meet the LCO 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> AND 1 O days from . discovery of failure to meet the LCO 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times EXAMPLES EXAMPLE 1.3-3 (continued)
When one Function X train and one Function Y train are inoperable, Condition A and Condition B are concurrently applicable.
The Completion Times for Condition A and Condition B are tracked separately for each train starting from the time each train was declared inoperable and the Condition was entered. A separate Completion Time is established for Condition C and tracked from the time the second train was declared inoperable (i.e., the time the situation described in Condition C was discovered).
If Required Action C.2 is completed within the specified Completion Time, Conditions B and C are exited. If the Completion Time for Required Action A.1 has not expired, operation may* continue in accordance with .. Condition A. The remaining Completion Time in Condition A is measured from the time the affected train was declared inoperable (i.e., initial entry into Condition A). The Completion Times of Conditions A and B are modified by a logical connector, with a separate 1 O day Completion Time measured from the time it was discovered the LCO was not met. In this example, without the separate Completion Time, it would be possible to alternate between Condition$
A, B, and C in such a manner that operation could continue indefinitely without ever restoring systems to meet the LCO. The separate Completion Time modified by the phrase "from discovery of failure to meet the LCO" is designed to prevent indefinite continued operation while not meeting the LCO. This Completion Time allows for an exception to the normal "time zero" for beginning the Completion Time "clock." In this instance, the Completion Time "time zero" is specified as commencing at the time the LCO was initially not met, instead of at the time the associated Condition was entered . Palisades Nuclear Plant 1.3-7 Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times EXAMPLES (continued)
EXAMPLE 1.3-4 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more A.1 Restore valve(s) to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> valves OPERABLE status. inoperable.
B. Required B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Action and associated AND Completion Time not met. B.2 Be in MODE 4. 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> A single Completion Time is used for any number of valves inoperable at the same time. The c'ompletion Time associated with Condition A is based on the initial entry into Condition A and is not tracked on a per valve basis. Declaring subsequent valves inoperable; while Condition A is still in effect, does not trigger the tracking of separate Completion Times. Once one of the valves has been restored to OPERABLE status, the Condition A Completion Time is not reset, but continues from the time the first valve was declared inoperable.
The Completion Time may be extended if the valve restored to OPERABLE status was the first inoperable valve. The Condition A Completion Time may be extended for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> provided this does not result in any subsequent valve being inoperable for > 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. If the Completion Time of 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> (including the extension) expires while one or more valves are still inoperable, Condition B is entered . Palisades Nuclear Plant 1.3-8 Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times EXAMPLES (continued)
EXAMPLE 1.3-5 ACTIONS --------------------------------------------NOTE--------------------------------------------
Separate Condition entry is allowed for each inoperable valve. CONDITION REQUIRED ACTION COMPLETION TIME A. One or more A.1 Restore valve to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> valves OPERABLE inoperable.
status. B. Required B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Action C1nd associated AND Completion Time not met. B.2 Be in MODE 4. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> The Note above the ACTIONS Table is a method of modifying how the Completion Time is tracked. If this method of modifying how the . Completion Time is tracked was applicable.only to a specific Condition, the Note would appear in that Condition rather than at the top of the ACTIONS Table. The Note allows Condition A to be entered separately for each inoperable valve, and Completion Times tracked on a per valve basis. When a valve is declared inoperable, Condition A is entered and its Completion Time starts. If subsequent valves are declared inoperable, Condition A is entered for each valve and separate Completion Times start and are tracked for each valve. If the Completion Time associated with a valve in Condition A expires, Condition B is entered for that valve. If the Completion Times associated with subsequent valves in Condition A expire, Condition B is entered separately for each valve and separate Completion Times start and are tracked for each valve. If a valve that caused entry into Condition B is restored to OPERABLE status, Condition B is exited for that Since the Note in this example allows multiple Condition entry and tracking of separate Completion Times, Completion Time extensions do not apply . Palisades Nuclear Plant 1.3-9 Amendment No.
Completion Times 1.3
- 1.3 Completion Times *
- EXAMPLE (continued)
EXAMPLE 1.3-6 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One channel A.1 Perform SR 3.x.x.x. Once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> inoperable.
OR A.2 Reduce THERMAL 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> POWER to 50% RTP. B. Required 8.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Action and associated l Completion Time not met. Entry into Condition A offers a choice between Required Action A.1 or A.2. Required Action A.1 has.a "once per" Completion Time, which qualifies for the 25% extension, per SR 3.'0.2, to each performance after the initial performance.
The initial 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> interval of Required Action A.1 begins when Condition A is entered and the initial performance of Required Action A.1 must be complete within the first 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> interval.
If Required Action A.1 is followed and the Required Action is not met within the Completion Time (plus the extension allowed by SR 3.0.2), Condition B is entered. If Required Action A.2 is followed and the Completion Time of 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> is not met, Condition B is entered. If after entry into Condition B, Required Action A.1 or A.2 is met, Condition B is exited and operation may then continue in Condition A. Palisades Nuclear Plant 1.3-10 Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times EXAMPLES (continued)
EXAMPLE 1.3-7 ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One A.1 Verify affected 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> subsystem subsystem inoperable.
isolated.
AND Once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> thereafter AND 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> A.2 Restore subsystem to OPERABLE status . B. Required B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Action and associated AND Completion Time not met. B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Required Action A.1 has two Completion Times. The 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> Completion Time begins at the time the Condition is entered and each "Once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> thereafter" interval begins upon performance of Required Action A.1. If after Condition A is entered, Required Action A.1 is not met within either the initial 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> or any subsequent 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> interval from the previous performance (plus the extension allowed by SR 3.0.2), Condition B is entered . Palisades Nuclear Plant 1.3-11 Amendment No.
- *
- Completion Times 1.3 1.3 Completion Times EXAMPLES EXAMPLE 1.3-7 (continued)
The Completion Time clock for Condition A does not stop after Condition B is entered, but continues from the time Condition A was initially entered. If Required Action A.1 is met after Condition B is entered, Condition B is exited and operation may continue in accordance with Condition A, provided the Completion Time for Required Action A.2 has not expired. IMMEDIATE When "Immediately" is used as a Completion Time, the Required Actioni COMPLETION TIME should be pursued without delay and in a controlled manner . Palisades Nuclear Plant 1.3-12 Amendment No.
- *
- Frequency 1.4 1.0 USE AND APPLICATION
1.4 Frequency
PURPOSE DESCRIPTION EXAMPLES Palisades Nuclear Plant The purpose of this section is to define the proper use and application of Frequency requirements.
Each Surveillance Requirement (SR) has a specified Frequency in which the Surveilfance must be met in order to meet the associated LCO. An understanding of the correct application of the specified Frequency is necessary for compliance with the SR. The "specified Frequency" is referred to throughout this section and each of the Specifications of Section 3.0, Surveillance Requirement (SR) Applicability.
The "specified Frequency" consists of the requirements of the Frequency column of eacli SR, as well as certain Notes in the Surveillance column that modify performance requirements.
Situations where a Surveillance could be required (i.e.; its Frequency could expire), but where it is not possible or not desired that it be performed until sometime after the associated LCO is within its Applicability, represent potential SR 3.0.4 conflicts.
To avoid these conflicts, the SR (i.e., the Surveillance or the Frequency) is stated such that it is only "required" when it can be and should be performed.
With an SR satisfied, SR 3.0.4 imposes no restriction.
The following examples illustrate the various ways that Frequencies are specified.
In these examples, the Applicability of the LCO (LCO not shown) is MODES 1, 2, and 3 . 1.4-1 Amendment No.
- *
- 1.4 Frequency EXAMPLES (continued)
Palisades Nuclear Plant EXAMPLE 1.4-1 SURVEILLANCE REQUIREMENTS SURVEILLANCE Perform CHANNEL CHECK. Frequency
1.4 FREQUENCY
12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Example 1.4-1 contains the type of SR most often encountered in the Technical Specifications (TS). The Frequency specifies an interval (12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />) during which the associated Surveillance must be performed at least one time. Performance of the Surveillance initiates the subsequent interval.
Although the Frequency is stated as 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />, an extension of the time interval to 1.25 times the stated Frequency is allowed by SR 3.0.2 for operational flexibility.
The measurement of this interval continues at all times, even when the SR is not required to be met per SR 3.0.1 (such as when the equipment is inoperable, a variable is outside specified limits, or the plant is outside the Applicability of the LCO). If the interval specified by SR 3.0.2 is exceeded while the plant is in a MODE or other specified condition in the Applicability of the LCO, and the performance of the Surveillance is not otherwise modified (refer to Example 1.4-3), then SR 3.0.3 becomes applicable.
If the interval as specified by SR 3.0.2 is exceeded while the plant is not in a MODE or other specified condition in the Applicability of the LCO for which performance of the SR is required, the Surveillance must be performed within the Frequency requirements of SR 3.0.2 prior to entry into the MODE or other specified condition.
Failure to do so would result in a violation of SR 3.0.4 . 1.4-2 Amendment No.
- **
- 1.4. Frequency EXAMPLES (continued)
Palisades Nuclear Plant EXAMPLE 1.4-2 SURVEILLANCE REQUIREMENTS SURVEILLANCE Verify flow is within limits. Frequency
1.4 FREQUENCY
Once within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after 25% RTP 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> thereafter Example 1.4-2 has two Frequencies.
The first is a one time performance Frequency, and the second is of the type shown in Example 1.4-1. The logical connector "AND" indicates that both Frequency requirements must be met. Each time reactor power is increased from a power level < 25% RTP 25% RTP, the Surveillance must be performed within 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />. The use of "once" indicates a single performance will satisfy the specified Frequency (assuming no other Frequencies are connected by "AND"). This type of Frequency does not qualify for the extension allowed by SR 3.0.2. "Thereafter" indicates future performances must be established per SR 3.0.2, but only after a specified condition is first met (i.e., the "once" performance in this example).
If reactor power decreases to< 25% RTP, the measurement of both intervals stops. New intervals start upon reactor power reaching 25% RTP . 1.4-3 Amendment No.
- *
- 1.4 Frequency EXAMPLES (continued)
EXAMPLE 1.4-3 SURVEILLANCE REQUIREMENTS SURVEILLANCE
N()TE----------------------------
Not required to be performed until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after <: 25% RTP. Perform channel adjustment.
Frequency
1.4 FREQUENCY
7 days As the Note modifies the required performance of the Surveillance, it is construed to be part of the "specified Frequency." Should the 7 day interval be exceeded while operation is < 25% RTP, this Note allows 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after power reaches <: 25% RTP to perform the Surveillance.
The Surveillance is still considered to be performed within the "specified Frequency." The interval continues, whether or not the plant operation is < 25% RTP between performances.
Therefore, if the Surveillance were not performed within the 7 day (plus the extension allowed by SR 3.0.2) interval, but operation was< 25% RTP, it would not constitute a failure of the SR or failure to meet the LC(). Also, no violation of SR 3.0.4 occurs when changing M()DES, even with the 7 day Frequency not met, *provided operation does not exceed 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> with power<: 25% RTP. Palisades Nuclear Plant ()nee the plant reaches 25% RTP, 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> would be allowed for completing the Surveillance.
If the Surveillance were not performed within this 12 hour1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> interval, there would then be a failure to perform a Surveillance within the specified Frequency, and the provisions of SR 3.0.3 would apply . 1.4-4 Amendment No.
- *
- 2.0 SAFETY LIMITS (SLs) 2.1 SLs 2.1.1 Reactor Core SLs ------SLs 2.0 2.1.1.1 In MODES 1 and 2, the Departure from Nucleate Boiling Ratio (DNBR) shall be maintained at or above the following DNB correlation safety limits: 2.1.1.2 Correlation XNB ANFP HTP Safety Limit 1.17 1.154 1.141 In MODES 1 and 2, the peak Linear Heat Rate (LHR) (adjusted for fuel rod dynamics) shall be maintained at s: 21.0 kW/ft. 2.1.2 Primary Coolant System (PCS) Pressure SL In MODES 1, 2, 3, 4, 5, and 6, the PCS pressure shall be maintained at s: 2750 psia . 2.2 SL Violations 2.2.1 If SL 2.1.1.1 or SL 2.1.1.2 is violated, restore compliance and be in MODE 3 within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />. 2.2.2 If SL 2.1.2 is violated:
2.2.2.1 In MODE 1 or 2, restore compliance and be in MODE 3 within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />. 2.2.2.2 In MODE 3, 4, 5, or 6, restore compliance within 5 minutes. Palisades Nuclear Plant 2.0-1 Amendment No.
- *
- LCO Applicability 3.0 3.0 LIMITING CONDITION FOR OPERATION (LCO) APPLICABILITY LCO 3.0.1 LCO 3.0.2 LCO* 3.0.3 LCO 3.0.4 LCOs shall be met during the MODES or other specified conditions in the Applicability, except as provided in LCO 3.0.2 and LCO 3.0.7. Upon discovery of a failure to meet an LCO, the Required Actions of the associated Conditions shall be met, except as provided in LCO 3.0.5 and LCO 3.0.6. If the LCO is met or is no longer applicable prior to expiration of the specified Completion Time(s), completion of the Required Action(s) is not required, unless otherwise stated. When an LCO is not met and the associated ACTIONS are not an associated ACTION is not provided, or if directed by the associated ACTIONS, the plant shall be placed in a MODE or other specified condition in which the LCO is not applicable.
Action shall be initiated within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> to place the plant, as applicable, in: a. MODE 3 within 7 hours8.101852e-5 days <br />0.00194 hours <br />1.157407e-5 weeks <br />2.6635e-6 months <br />; b . MODE 4 within 31 hours3.587963e-4 days <br />0.00861 hours <br />5.125661e-5 weeks <br />1.17955e-5 months <br />; and* c. MODE 5 within 37 hours4.282407e-4 days <br />0.0103 hours <br />6.117725e-5 weeks <br />1.40785e-5 months <br />. Exceptions to this Specification are stated in the individual Specifications.
Where corrective measures are completed that permit operation in accordance with the LCO or ACTIONS, completion of the actions required by LCO 3.0.3 is not required.
LCO 3.0.3 is only applicable in MODES 1, 2, 3, and 4. When an LCO is not met, entry into a MODE or other specified condition in the Applicability shall not be made except when the associated ACTIONS to be entered permit continued operation in the MODE or other specified condition in the Applicability for an unlimited period of time. This Specification shall not prevent changes in MODES or other specified conditions in the Applicability that are required to comply with ACTIONS. Exceptions to this Specification are stated in the individual Specifications . Palisades Nuclear Plant 3.0-1 Amendment No.
- *
- LCO Applicability 3.0 3.0 LCO APPLICABILITY LCO 3:0.5 LCO 3.0.6 LCO 3.0.7 Equipment removed from service or declared inoperable to comply with ACTIONS may be returned to service under administrative control solely to perform testing required to demonstrate its OPERABILITY or the OPERABILITY of other equipment.
This is an exception to LCO 3.0.2 for the system returned to service under administrative control to perform the testing required to demonstrate OPERABILITY.
When a supported system LCO is not met solely due to a support system LCO not being met, the Conditions and Required Actions associated with *this supported system are not required to be entered. Only the support system LCO ACTIONS are required to be entered. This is an exception to LCO 3.0.2 for the supported system. In this event, an evaluation shall be performed in accordance with Specification 5.5.13, "Safety Function Determination Program (SFDP)." If a loss of safety function is determined to exist by this program, the appropriate Conditions and Required Actions of the LCO in which the loss of safety function exists are required to be entered. When a support system's Required Action directs a supported system to be declared inoperable or directs entry into Conditions and Required Actions for a supported system, the applicable Conditions and Required Actions shall be entered in accordance with LCO 3.Q.2 . Special Test Exception (STE) LCOs in each applicable LCO section allow specified Technical Specifications (TS) requirements to be changed to permit performance of special tests and operations.
Unless otherwise specified, all other TS requirements remain unchanged.
Compliance with STE LCOs is optional.
When an STE LCO is desired to be met but is not met, the ACTIONS of the STE LCO shall be met. When an* STE LCO is not desired to be met, entry into a MODE or other specified condition in the Applicability shall only be made in accordance with the other applicable Specifications . Palisades Nuclear Plant 3.0-2 Amendment No.
- *
- SR Applicability 3.0 3.0 SURVEILLANCE REQUIREMENT (SR) APPLICABILITY SR 3.0.1 SR 3.0.2 SR 3.0.3 SRs shall be met during the MODES or other specified conditions in the Applicability for individual LCOs, unless otherwise stated in the SR. Failure to meet a Surveillance, whether such failure is experienced during tht? performance of the Surveillance or between performances of the Surveillance, shall be failure to meet the LCO. Failure to perform a Surveillance within the specified Frequency shall be failure to meet the LCO except as provided in SR 3.0.3. Surveillances do not have to be performed on inoperable equipment or variables outside specified limits. The specified Frequency for each SR is met if the Surveillance is performed within 1.25 times the interval specified in the Frequency, as measured from the previous performance or as measured from the time a specified condition of the Frequency is met. For Frequencies specified as "once," the above interval extension does not apply. If a Completion Time requires periodic performance on a "once per ... " basis, the above Frequency extension applies to each performance after the initial performance . Exceptions to this Specification are stated in the individual Specifications.
If it is discovered that a Surveillance was not performed within its specified Frequency, then compliance with the requirement to declare the LCO not met may be delayed, from the time of discovery, up to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> or up to the limit of the specified Frequency, whichever is less. This delay period is permitted to allow performance of the Surveillance.
If the Surveillance is not performed within the delay period, the LCO must immediately be declared not met, and the applicable Condition(s) must be entered. When the Surveillance is performed within the delay period and the Surveillance is not met, the LCO must immediately be declared not met, and the applicable Condition(s) must be entered . Palisades Nuclear Plant 3.0-3 Amendment No.
SR Applicability 3.0
- 3.0 SR APPLICABILITY
- SR 3.0.4 Entry into a MODE or other specified condition in the Applicability of an LCO shall not be made unless the LCO's Surveillances have been met within their specified Frequency.
This provision shall not prevent entry into MODES or other specified conditions in the Applicability that are required to comply with ACTIONS . Palisades Nuclear Plant 3.0-4 Amendment No.
- 3.1 REACTIVITY CONTROL SYSTEMS 3.1.1 SHUTDOWN MARGIN (SOM) SOM 3.1.1 LCO 3.1.1
- SOM shall be within the limits specified in the COLR.
- APPLICABILITY:
MODE 3, 4, and 5. ACTIONS CONDITION.
A. SOM not within limit. , A.1 SURVEILLANCE REQUIREMENTS REQUIRED ACTION Initiate boration to restore SOM to within limit. SURVEILLANCE SR 3.1.1.1 . Verify SOM to be within limits. Palisades Nuclear Plant 3.1.1-1 COMPLETION TIME 15 minutes FREQUENCY 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Amendment No.
- *
- 3.1 REACTIVITY CONTROL SYSTEMS 3.1.2 Reactivity Balance Reactivity Balance 3.1.2 LCO 3.1.2 The core reactivity balance shall be within +/- 1 % L'lp of predicted values. APPLICABILITY:
MODE 1. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Core reactivity balance not A.1 Re-evaluate core design 7 days within limit. and safety analysis and determine that the reactor core is acceptable for continued operation . AND A.2 Establish appropriate 7 days operating restrictions and SRs. B. Required Action and 8.1 Be in MODE 2. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. Palisades Nuclear Plant 3.1.2-1 Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.1.2.1 SURVEILLANCE
1\J()TE----------------------------
The predicted reactivity values may be adjusted (normalized) to correspond to the measured core reactivity prior to exceeding a fuel burn up of 60 Effective Full Power Days (EFPD) after each fuel loading. Verify overall core reactivity balance is within +/- 1 % Llp of predicted values. Palisades l'Juclear Plant 3.1.2-2 Reactivity Balance 3.1.2 FREQUENCY Prior to entering M()DE 1 after each fuel loading
()nly required after initial 60 EFPD 31 EFPD Amendment No.
MTC 3.1.3
- 3.1 REACTIVITY CONTROL SYSTEMS *
- 3.1.3 Moderator Temperature Coefficient (MTC) LCO 3.1.3 The MTC shall be maintained less positive than 0.5 E-4 at:::: 2% RA TED THERMAL POWER (RTP). APPLICABILITY: . MODES 1 and 2 . . ACTIONS CONDITION REQUIRED ACTION A. MTC not within limits. A.1 Be in MODE 3. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.1.3.1 Verify MTC is less positive than 0.5 E-4 at I :::: 2% RTP. Palisades Nuclear Plant 3.1.3-1 COMPLETION TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> FREQUENCY Prior to exceeding . 2% RTP after each fuel loading Amendment No.
- **
- 3.1 REACTIVITY CONTROL SYSTEMS 3.1.4 Control Rod Alignment Control Rod Alignment 3.1.4 LCO 3.1.4 All control rods, including their position indication channels, shall be OPERABLE and aligned to within 8 inches of all other rods in their respective group, and the control rod position' deviation alarm shall be OPERABLE.
APPLICABILITY:
MODES 1 and 2. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One channel of rod position A.1 Perform SR 3.1.4.1 Once within indication inoperable for (rod position 15 minutes following one or more control rods. verification).
any rod motion in that group B. Rod position deviation . B.1 Perform SR 3.1.4.1 Once within alarm inoperable. (rod position 15 minutes of verification).
movement of any control rod C. One control rod misaligned C. 1 Perform SR 3.2.2.1 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> by > 8 inches. (peaking factor verification).
OR C.2 Reduce THERMAL 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> POWER to::; 75% RTP. D. One full-length control rod D. 1 'Restore control rod to Prior to entering immovable, but trippable.
OPERABLE status. MODE 2 following next MODE 3 entry Palisades Nuclear Plant 3.1.4-1 Amendment No.
- ACTIONS CONDITION E. Required Action and associated Completion Time not met. One or more control rods inoperable for reasons other than Condition D . . OR Two or more control rods misaligned by > 8 inches. Both rod position indication channels inoperable for one or more control rods . Palisades Nuclear Plant REQUIRED ACTION E.1 Be in MODE 3. 3.1.4-2 . Control Rod Alignment
3.1.4 COMPLETION
TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Amendment No.
- SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.1.4.1 Verify the position of each control rod to be within 8 inches of all other control rods in its group. SR 3.1.4.2 Perform a CHANNEL CHECK of the control rod position indication channels.
SR 3.1.4.3 Verify control rod freedom of movement by moving each individual full-length control rod that is not fully inserted into the reactor core 6 inches in either direction. (
- SR 3.1.4.4 Verify the rod position deviation alarm is OPERABLE.
SR 3.1.4.5 Perform a CHANNEL CALIBRATION of the control rod position indication channels.
SR 3.1.4.6 Verify each full-length control rod drop time is :o;; 2.5 seconds. -* Palisades Nuclear Plant 3.1.4-3 '-Control Rod Alignment
3.1.4 FREQUENCY
12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours 92 days 18 months 18 months Prior to reactor criticality, after each reinstallation of the reactor head Amendment No.
Shutdown and Part-Length Rod Group Insertion Limits 3.1.5
- 3.1 REACTIVITY CONTROL SYSTEMS *
- 3.1.5 Shutdown and Part-Length Control Rod Group Insertion Limits LCO 3.1.5 All shutdown and part-length rod groups shall be withdrawn to 128 inches. APPLICABILITY:
MODE 1, MODE 2 with any regulating rod withdrawn above 5 inches. --------------------------------------------NOTE--------------------------------------------
Th is LCO is not applicable while performing SR 3.1.4.3 (rod exercise test). ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more shutdown or A.1 Declare affected control Immediately part-length rods not within rod(s) inoperable and limit. enter the applicable Conditions and Required Actions of LCO 3.1.4. B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.1.5.1 Verify each and part-length rod group is 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> withdrawn 128 inches . Palisades Nuclear Plant 3.1.5-1 Amendment No.
- *
- 3.1 REACTIVITY CONTROL SYSTEMS 3.1.6 Regulating Rod Group Position Limits Regulating Rod Group Position Limits 3.1.6 LCO 3.1.6 The Power Dependent Insertion Limit (PDIL) alarm circuit and the Control Rod Out Of Sequence (CROOS) alarm circuit shall be OPERABLE, and the regulating rod groups shall be limited to the withdrawal sequence, overlap, and insertion limits specified in the COLR. APPLICABILITY:
MODES 1 and 2.
This LCO is not applicable while performing SR 3.1.4.3 (rod exercise test). ACTIONS *CONDITION A. Regulating rod groups inserted beyond the insertion limit. Palisades Nuclear Plant REQUIRED ACTION COMPLETION TIME A.1 Restore regulating rod 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> groups to within limits.
- A.2 Reduce THERMAL 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> POWER to less than or equal to the fraction of RTP allowed by the regulating rod group position and insertion limits specified in the COLR. 3.1.6-1 Amendment No.
- **
- ACTIONS CONDITION B. Regulating rod groups not B.1 within sequence or overlap limits. .c. . PDIL or GROOS alarm C.1 circuit inoperable.
D. Required Action and D. 1 associated Completion Time not met. SURVEILLANCE REQUIREMENTS Regulating Rod Group Position Limits 3.1.6 REQUIRED ACTION COMPLETION TIME Restore regulating rod 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> groups to within appropriate sequence and overlap limits. Perform SR 3.1.6.1 Once within (group position 15 minutes following verification).
any rod motion Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> .* SURVEILLANCE FREQUENCY SR 3.1.6.1 Verify each regulating rod group is within its 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> withdrawal sequence, overlap, and insertion limits. SR 3.1.6.2 Verify PDIL alarm circuit is OPERABLE.
31 days SR 3.1.6.3 Verify GROOS alarm circuit is OPERABLE.
31 days Palisades Nuclear Plant . 3.1.6-2 Amendment No .
Special Test Exceptions (STE) 3.1.7
- 3.1 REACTIVITY CONTROL SYSTEMS 3.1. 7 Special Test Exceptions (STE) *
- LCO 3.1.7 During the performance of PHYSICS TESTS, the requirements of LCO 3.1.4, LCO 3.1.5, LCO 3.1.6, .LCO 3.4.2, "Control Rod Alignment"; "Shutdown and Part-Length Rod Group Insertion Limits"; "Regulating Rod Group Position Limits"; and "PCS Minimum Temperature for Criticality" may be suspended, provided:
- a. THERMAL POWER is 2% RTP; b. 1 % shutdown reactivity, based on predicted control rod worth, is available for trip insertion; and c. Tave is 500°F. APPLICABILITY:
MODE 2 during PHYSICS TESTS. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. THERMAL POWER not A.1 Reduce THERMAL 15 minutes within limit. POWER to within limit. ' 8. Shutdown reactivity not 8.1 Initiate boration to 15 minutes within limit. restore shutdown reactivity to within limit. C. Tave not within limit. C.1 Restore Tave to within 15 minutes limit. Palisades Nuclear Plant 3.1.7-1 Amendment No.
- *
- ACTIONS CONDITION D. Required Action and associated Completion Time not met. SURVEILLANCE REQUIREMENTS D. 1 REQUIRED ACTION Suspend PHYSICS TESTS. SURVEILLANCE SR 3.1.7.1 Verify THERMAL POWER 2% RTP. SR 3.1.7.2 Verify Tave is :?: 500°F. Special Test Exceptions (STE) 3.1.7 COMPLETION TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> FREQUENCY 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 1 hour SR 3.1.7.3 Verify :?: 1 % shutdown reactivity is available for trip 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> insertion . Palisades Nuclear Plant 3.1.7-2 Amendment No.
LHR 3.2.1
- 3.2 POWER DISTRIBUTION LIMITS
- 3.2.1 Linear Heat Rate (LHR) LCO 3.2.1 LHR shall be within the limits specified in the COLR, and the lncore Alarm System or Excore Monitoring System shall be OPERABLE to monitor LHR. APPLICABILITY:
MODE 1 with THERMAL POWER> 25% RTP. ACTIONS CONDITION A. LHR, as determined by the A.1 automatic lncore Alarm System, not within limits specified in the COLR, as indicated by four or more coincident incore channels.
LHR, as determined by the Excore Monitoring System, not within limits specified in the COLR. LHR, as determined by manual incore detector readings, not within limits specified in the COLR. Palisades Nuclear Plant REQUIRED ACTION Restore LHR to within limits. 3.2.1-1 COMPLETION TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> Amendment No.
- *
- ACTIONS CONDITION
- 8. lncore Alarm and Excore Monitoring Systems inoperable for monitoring LHR. C. Required Action and associated Completion Time not met. SURVEILLANCE REQUIREMENTS
8.1 REQUIRED
ACTIO Reduce THERM POWER 85 N AL %RTP. hin ual 8.2 Verify LHR is wit limits using man incore readings.
C. 1 Reduce THERM POWER 25 AL %RTP. SURVEILLANCE SR 3.2.1.1 -------------------------------NOTE-----------------
Only required to be met when the lncore A System is being used to monitor LHR. I arm ----------
Verify LHR is within the limits specified in th e COLR. Palisades Nuclear Plant 3.2.1-2 LHR 3.2.1 COMPLETION TIME 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> 4 hours AND Once per 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> thereafter 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.2.1.2 SR 3.2.1.3 SR 3.2.1.4 SURVEILLANCE
N()TE----------------------------
Only required to be met when the lncore Alarm System is being used to monitor LHR. Adjust incore alarm setpoints based on a measured power distribution.
N()TE---------------------------
()nly required to be met when the Excore Monitoring System is being used to monitor LHR. Verify measured ASI has been within 0.05 of target ASI for last 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. -------------------------------N()TE---------------------------
Only required to be met when the Excore Monitoring System is being used to monitor LHR. Verify THERMAL P()WER is less than the APL. Palisades Nuclear Plant 3.2.1-3 LHR 3.2.1 FREQUENCY Prior to operation
> 50% RTP after each fuel loading 31 EFPD thereafter Prior to each initial use of Excore Monitoring System to monitor LHR 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.2.1.5 SR 3.2.1.6 SURVEILLANCE
N()TE---------------------------
On ly required to be met when the Excore Monitoring System is being used to monitor LHR. Verify measured ASI is within 0.05 of target ASI. -------------------------------N()TE---------------------------
()nly required to be met when the Excore Monitoring System is being used to monitor LHR. Verify Tq :s; 0.03. Palisades Nuclear Plant 3.2.1-4 LHR 3.2.1 FREQUENCY 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 24 hours Amendment No.
Radial Peaking 3.2.2
- 3.2 POWER DISTRIBUTION LIMITS *
- 3.2.2 Radial Peaking Factors LCO 3.2.2 The Assembly Radial Peaking Factor, FRA* and Total Radial Peaking Factor, FR T' shall be within the limits specified in the COLR. APPLICABILITY:
MODE 1 with THERMAL POWER > 25% RTP. ACTIONS CONDITION REQUIRED ACTION A. One or. more Radial A.1 Restore Radial Peaking Peaking Factors not within Factor(s) to within limits. limits specified in the COLR. B. Required Action and 8.1 Reduce THERMAL associated Completion POWER 25% RTP. Time not met. I SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.2.2.1 Verify Fl and FRT are within limits specified in the COLR. Palisades Nuclear Plant 3.2.2-1 COMPLETION TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 4 hours FREQUENCY Prior to operation
> 50% RTP after each fuel loading 31 EFPD thereafter Amendment No.
- 3.2 POWER DISTRIBUTION LIMITS 3.2.3 QUADRANT POWER TILT (Tq) LCO 3.2.3 Tq shall bes 0.05. APPLICABILITY:
MODE 1 with THERMAL POWER> 25% RTP. ACTIONS CONDITION REQUIRED ACTION A. Tq > 0.05. A.1 Verify FRA and FRT are within the limits of LCO 3.2.2, "Radial Peaking Factors."
- B. Tq > 0.10. 8.1 Reduce THERMAL POWER to < 50% RTP. C. Required Action and C.1 Reduce THERMAL associated Completion POWER to s 25% RTP. Time not met. OR Tq>0.15. I SURVEILLANCE REQUIREMENTS
- SURVEILLANCE SR 3.2.3.1 Verify Tq is s 0.05.
- Palisades Nuclear Plant 3.2.3-1 Tq 3.2.3 COMPLETION TIME 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> AND Once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> thereafter 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> 4 hours FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No.
- 3.2 POWER DISTRIBUTION LIMITS 3.2.4 AXIAL SHAPE INDEX (ASI) ASI 3.2.4 LCO 3.2.4 The ASI shall be within the limits specified in the COLR. APPLICABILITY:
MODE 1 with THERMAL POWER> 25% RTP. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. ASI not within limits A.1 Restore ASI to within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> specified in COLR. limits. B. Required Action and B.1 Reduce THERMAL 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />
- associated Completion POWER to 25% RTP . Time not met. SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.2.4.1 Verify ASI is within limits specified in the COLR. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />
- Palisades Nuclear Plant 3.2.4-1 Amendment No.
RPS Instrumentation 3.3.1
- 3.3 INSTRUMENTATION
- 3.3.1 Reactor Protective System (RPS) Instrumentation LCO 3.3.1 Four RPS trip units, associated instrument ctiannels, and associated Zero Power Mode (ZPM) Bypass removal channels for each Function in Table 3.3.1-1 shall be OPERABLE.
APPLICABILITY:
According to Table 3.3.1-1. ACTIONS -----------------------------------------------------------NOTE----------------------------------------------------------
Separate Condition entry is allowed for each Funqtion.
CONDITION REQUIRED ACTION COMPLETION TIME . A. -------------NOTE--------------
A.1 Place affected trip unit 7 days Not applicable to High in trip. Startup Rate, Loss of Load, or ZPM Bypass Removal Functions.
One or more Functions with one RPS trip unit or associated instrument channel inoperable.
B. One High Startup Rate trip B.1 Restore trip unit and Prior to entering unit or associated associated instrument MODE 2 from instrument channel channel to OPERABLE MODE3 inoperable.
status . Palisades Nuclear Plant 3.3.1-1 Amendment No.
- ACTIONS CONDITION
- c. One Loss of Load trip unit or associated instrument channel inoperable.
D. One or more ZPM Bypass Removal channels inoperable.
E. -------------r'JOTE.--------------
Not applicable to . ZPM Bypass Removal
- Function.
One or more Functions with two RPS trip units or associated instrument channels inoperable.
F. Two power range channels inoperable .
- Palisades Nuclear Plant REQUIRED ACTION c. 1 Restore trip unit and associated instrument channel to OPERABLE status. D. 1 Remove the affected ZPM Bypasses.
OR D.2 Declare affected trip units inoperable.
NOTE.------------------
LCO 3.0.4 is not applicable.
E.1 Place one trip unit in trip. AND -----------------NOTE.-------------------
Not applicable to High Startup Rate or Loss of Load Functions.
E.2 Restore one trip unit and associated instrument channel to OPERABLE.
status. F.1 Restrict THERMAL POWER to 70% RTP. 3.3.1-2 RPS Instrumentation
3.3.1 COMPLETION
TIME Prior to increasing THERMAL POWER 17% RTP following entry into MODE3 Immediately Immediately 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 7 days 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> Amendment No.
- **
- ACTIONS CONDITION G. Required Action and associated Completion Time not met. OR Control room ambient air temperature
> 90°F. SURVEILLANCE REQUIREMENTS REQUIRED ACTION G.1 Be in MODE 3. AND G.2.1 Verify no more than one full-length control rod is capable of being withdrawn.
OR G.2.2 Verify* PCS boron concentration is at REFUELING BORON CONCENTRATION . RPS Instrumentation
3.3.1 COMPLETION
TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 6 hours 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> -----------------------------------------------------------NOTE----------------------------------------------------------
Refer to Table 3.3.1-1 to determine which SR shall be performed for each Function.
SURVEILLANCE FREQUENCY SR 3.3.1.1 Perform a CHANNEL CHECK. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> SR 3.3.1.2 Verify control room temperature is ::; 90°F. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Palisades Nuclear Plant 3.3.1-3 Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.3.1.3 SURVEILLANCE
N()TE-----------------------------
Not required to be performed until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after THERMAL P()WER is 15% RTP. RPS Instrumentation
3.3.1 FREQUENCY
Perform calibration (heat balance only) and adjust 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> SR 3.3.1.4 SR 3.3.1.5 SR 3.3.1.6 SR 3.3.1.7 the power range excore and b. T power channels to agree with calorimetric calculation if the absolute difference 1.5%. -----------------------------N()TE-----------------------------
Not required to be performed until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after THERMAL P()WER is 25% RTP. Calibrate the power range excore channels using the incore detectors.
- Perform a CHANNEL FUNCTl()NAL TEST and verify the Thermal Margin Monitor Constants.
Perform a calibration check of the power range excore channels with a test signal. Perform a CHANNEL FUNCTl()NAL TEST of High Startup Rate and Loss of Load Functions.
Palisades Nuclear Plant 3.3.1-4 31 days 92 days 92 days ()nee within 7 days prior to each reactor startup Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.3.1.8 SURVEILLANCE
N()TE-----------------------------
Neutron detectors are excluded from the CHANNEL CALIBRATl()N.
Perform a CHANNEL CALIBRATION.
Palisades Nuclear Plant 3.3, 1-5 RPS Instrumentation
3.3.1 FREQUENCY
18 months Amendment No.
RPS Instrumentation 3.3.1
- Table 3.3.1-1 (page 1 of 2) Reactor Protective System Instrumentation APPLICABLE SURVEILLANCE ALLOWABLE FUNCTION MODES REQUIREMENTS VALUE 1. Variable High Power Trip 1,2,3(a),4(a),5(a)
SR 3.3.1.1 s 15% RTP above SR 3.3.1.2 current THERMAL SR 3.3.1.3 POWER with a SR 3.3.1.4 minimum of s 30% SR 3.3.1.5 RTP and a SR 3.3.1.6 maximum of SR 3.3.1.8 s 106.5% RTP 2. High Startup Rate Trip(b) 1,2 SR 3.3.1.1 NA .SR 3.3.1.7
- SR 3.3.1.8 3. Low Primary Coolant System Flow Trip(c) 1,2,3(a),4(a),5(a)
SR 3.3.1.1 95% SR 3.3.1.5 SR 3.3.1.8 4. Low Steam Generator A
- Level Trip 1,2,3(a),4(a),5(a)
SR 3.3.1.1 25.9% narrow SR 3.3.1.5 range SR 3.3.1.8 5. Low Steam Generator B Level Trip 1 2 3(a) 4(a) 5(a) I I I I SR 3.3.1.1 25.9% narrow SR 3.3.1.5 range SR 3.3.1.8 6. Low Steam Generator A Pressure Trip(c) 1,2,3(a),4(a),5(a)
SR 3.3.1.1 500 psia SR 3.3.1.5 SR 3.3.1.8 7. Low Steam Generator B Pressure Trip(c) 1,2,3(a),4(a),5(a)
SR 3.3.1.1 500 psia SR 3.3.1.5 SR 3.3.1.8 8. High Pressurizer Pressure Trip 1,2,3(a),4(a),5(a)
SR 3.3.1.1 s 2255 psia SR 3.3.1.5 SR 3.3.1.8 (a) With more than one full-length control rod capable of being withdrawn and PCS boron concentration less than REFUELING BORON CONCENTRATION. (b) Trip may be bypassed when Wide Range Power is < 1 E-4% RTP or when THERMAL POWER is > 13% RTP. * (c) Trips may be bypassed when Wide Range Power is < 1 E-4% RTP. Bypass shall be automatically removed when Wide Range Power is 1 E-4% RTP.
- Palisades Nuclear Plant 3.3.1-6 Amendment No.
- *
- RPS Instrumentation
3.3.1 Table
3.3.1-1 (page 2 of 2) Reactor Protective System Instrumentation APPLICABLE SURVEILLANCE ALLOWABLE FUNCTION MODES REQUIREMENTS VALUE 9. Thermal Margin/ Low Pressure Trip<cl 1 2 3(a) 4(a) 5(a) SR 3.3.1.1 Table 3.3.1-2 I t I 1 SR 3.3.1.2 SR 3.3.1.3 SR 3.3.1.4 -SR 3.3.1.5 SR 3.3.1.6 SR 3.3.1.8 10. Loss of Load Trip 1 (d) SR 3.3.1.7 NA SR 3.3.1.8 11. Containment High Pressure Trip 1 2 3(a) 4(a) 5(a) SR 3.3.1.5 3.70 psig I I I I SR 3.3.1.8 1.2. Zero Power Mode Bypass Automatic 1 2 3(a) 4(a) 5(a) Removal SR 3.3.1.8 NA I I I I (a) With more than one full-length control rod capable of being withdrawn and PCS boron concentration less than REFUELING BORON CONCENTRATION. ( c) *Trips may be bypassed when Wide Range Power is < 1 E-4% RTP. Bypass shall be automatically removed when Wide Range Power 1E-4% RTP. (d) When THERMAL POWER 17% RTP . Palisades Nuclear Plant 3.3.1-7 Amendment No.
- *
- Table 3.3.1-2 (page 1of1) RPS Instrumentation
3.3.1 Thermal
Margin/Low Pressure Trip Function Allowable Value The Allowable Value for Margin/Low Pressure Trip, Ptrip* is the higher of two values, P min and P var* both m ps1a: Pmin = 1750 Pvar = 2012(QA)(QR1)
+ 17.0(Tin)
-9493 Where: QA = -0. 720(ASI) + 1.028; QA = -0.333(ASI)
+ 1.067; QA = + 0.375(ASI)
+ 0.925; ASI = Measured ASI ASI = 0.0 QR 1 = 0.412(Q) + 0.588; QR 1 = Q; when -0.628 s ASI < -0.100 when -0.100 s ASI < + 0.200 when + 0.200 s ASI s + 0.565 when Q 0.0625 when Q < 0.0625 when Q s 1.0 when Q > 1.0 Q =THERMAL POWER/RATED THERMAL POWER Tin= Maximum primary coolant inlet temperature, in_ °F ASI, Tin and Qare the existing values as measured by the associated instrument channel. Palisades Nuclear Plant 3.3.1-8 Amendment No.
- 3.3 INSTRUMENTATION
3.3.2 Reactor
Proteqtive System (RPS) Logic and Trip Initiation RPS Logic and Trip Initiation 3.3.2 LCO 3.3.2 Six channels of RPS Matrix Logic, four channels of RPS Trip Initiation Logic, and two channels of RPS Manual Trip shall be OPERABLE.
APPLICABILITY:
MODES 1 and 2, MODES 3, 4, and 5, with more than one full-length control rod capable of being withdrawn and Primary Coolant System (PCS) boron concentration less than REFUELING BORON CONCENTRATION.
ACTIONS CONDITION A. One Matrix Logic channel inoperable . B. One channel of Trip Initiation Logic inoperable.
C. One channel of Manual Trip inoperable.
D. Two channels of Trip Initiation Logic affecting the same trip leg inoperable . Palisades Nuclear Plant A.1 B.1 C.1 D.1 REQUIRED ACTION Restore channel to OPERABLE status. De-energize the affected clutch power supplies.
Restore channel to OPERABLE status. De-energize the affected clutch power supplies.
3.3.2-1 COMPLETION TIME 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> 1 hour Prior to entering MODE 2 from MODE3 Immediately Amendment No.
- *
- RPS Logic and Trip Initiation
3.3.2 ACTIONS
CONDITION REQUIRED ACTION E.* Required Action and E.1 Be in MODE 3. associated Completion Time not met. AND OR E.2.1 Verify no more than one One or more Functions full-length control rod is with two or more Manual capable of being Trip, Matrix Logic or Trip withdrawn.
Initiation Logic channels inoperable for reasons OR other than Condition D. E.2.2 Verify PCS boron concentration is at REFUELING BORON CONCENTRATION . SURVEILLANCE REQUIREMENTS SR 3.3.2.1 SR 3.3.2.2 SURVEILLANCE Perform a CHANNEL FUNCTIONAL TEST on each RPS Matrix Logic channel and each RPS Trip Initiation Logic channel. Perform a CHANNEL FUNCTIONAL TEST on each RPS Manual Trip channel. Palisades Nuclear Plant 3.3.2-2 COMPLETION TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 6 hours 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> FREQUENCY 92 days Once within 7 days prior to each reactor startup Amendment No.
ESF Instrumentation 3.3.3
- 3.3 INSTRUMENTATION
- 3.3.3 Engineered Safety Features (ESF) Instrumentation LCO 3.3.3 Four ESF bistables and associated instrument channels for each Function in Table 3.3.3'..1 shall be OPERABLE.
APPLICABILITY:
As specified in Table 3.3.3-1. ACTIONS -----------------------------------------------------------NOTE----------------------------------------------------------
Separate Condition entry is allowed. for each Function.
CONDITION REQUIRED ACTION COMPLETION TIME A. ---------------NOTE---------------
A.1 Place affected bistable 7 days Not applicable to RAS . in trip. --------------------------------------
One or more Functions with one ESF bistable or associated instrument channel inoperable.
- 8. ---------------NOTE---------------
NOTE-----------------
Not applicable to RAS. LCO 3.0.4 is not applicable.
One or more Functions with B.1 Place one bistable in 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> two ESF bistables or trip. associated instrument . channels inoperable.
AND B.2 Restore one bistable 7 days and associated instrument channel to OPERABLE status . Palisades Nuclear Plant 3.3.3-1 Amendment No.
- ACTIONS CONDITION C. One RAS bistable or C.1 associated instrument channel inoperable.
AND C.2 D. Required Action and D.1 associated Completion Time not met for Functions 1, 2, 3, AND 4, or 7. D.2
- E.
- Required Action and E.1 associated Completion Time not met for Functions 5 or 6. AND E.2
- Palisades Nuclear Plant REQUIRED ACTION Bypass affected bistable.
Restore bistable and associated instrument channel to OPERABLE status. Be in MODE 3. Be in MODE 4. Be in MODE 3. Be in MODE 5. 3.3.3-2 ESF Instrumentation
3.3.3 COMPLETION
TIME 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> 7 days 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 30 hours 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours Amendment No.
- **
- SURVEILLANCE REQUIREMENTS ESF Instrumentation 3.3.3 -----------------------------------------------------------N()TE----------------------------------------------------------
Refer to Table 3.3.3-1 to determine which SR shall be performed for each Function.
SURVEILLANCE FREQUENCY SR 3.3.3.1 Perform a CHANNEL CHECK. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> SR 3.3.3.2 Perform a CHANNEL FUNCTIONAL TEST. 92 days SR 3.3.3.3 Perform a CHANNEL CALIBRATl()N.
18 months Palisades Nuclear Plant 3.3.3-3 Amendment No.
- *
- I. ESF Instrumentation 3.3.3 . Table 3.3.3-1 (page 1 of 2) Engineered Safety Features Instrumentation APPLICABLE SURVEILLANCE ALLOWABLE FUNCTION MODES REQUIREMENTS VALUE 1. Safety Injection Signal (SIS) a. Pressurizer Low Pressure 1,2,3 SR 3.3.3.1 :<>: 1593 psia SR 3.3.3.2 SR 3.3.3.3 2. Steam Generator Low Pressure Signal (SGLP) a. Steam Generator A Low 1 2(a) 3(a) ' ' SR 3.3.3.1 :<>: 500 psia Pressure SR 3.3.3.2 SR 3.3.3.3 b. Steam Generator B Low 1 2(a) 3(a) ' ' SR 3.3.3.1 :<>: 500 psia Pressure SR 3.3.3.2 SR 3.3.3.3 3. Recirculation Actuation Signal (RAS)* a. SIRWT Low Level 1,2,3 SR 3.3.3.3 :<>: 21 inches and :::: 27 inches above tank bottom 4. Auxiliary Feedwater Actuation Signal (AFAS) a. Steam Generator A Low SR 3.3.3.1 ::?: 25.9% Level SR 3.3.3.2 narrow range SR 3.3.3.3 b. Steam Generator B Low 1,2,3 SR 3.3.3.1 ::?: 25.9% Level SR 3.3.3.2 narrow range SR 3.3.3.3 (a) Not required to be OPERABLE when all Main Steam Isolation Valves (MSIVs) are closed and deactivated, and all Main Feedwater Regulating Valves (MFRVs) and MFRV bypass valves are either closed and deactivated, or isolated by closed manual valves. Palisades Nuclear Plant 3.3.3-4. Amendment No.
- *
- ESF Instrumentation
3.3.3 Table
3.3.3-1 (page 2 of 2) Engineered Safety Features Instrumentation APPLICABLE SURVEILLANCE ALLOWABLE FUNCTION MODES REQUIREMENTS VALUE 5. Containment High Pressure (CHP) a. Containment High Pressure -Left Train 1,2,3,4 SR 3.3.3.2 3.7 psig SR 3.3.3.3 and 4.3 psig b. Containment High Pressure -Right Train 1,2,3,4 SR 3.3.3.2 3.7 psig SR 3.3.3.3 and 4.3 psig 6. Containment High Radiation Signal (CHR) a. Containment High Radiation 1,2,3,4 SR 3.3.3.1 20 R/hour SR 3.3.3.2 SR 3.3.3.3 7. Automatic Bypass Removals a. Pressurizer Low Pressure 1,2,3 SR 3.3.3.3 1700 psia Bypass b. Steam Generator A Low 1 2(a) 3(a) ' ' SR 3.3.3.3 565 psia Pressure Bypass c. Steam Generator B Low 1 2(a) 3(a) ' ' SR 3.3.3.3 565 psia Pressure Bypass (a) Not required to be OPERABLE when all Main Steam Isolation Valves (MSIVs) are closed and deactivated, and all Main Feedwater Regulating Valves (MFRVs) and MFRV bypass valves are either closed and deactivated, or isolated by closed manual valves . Palisades Nuclear Plant 3.3.3-5 Amendment No.
ESF Logic and Manual Initiation 3.3.4
- 3.3 INSTRUMENTATION
- 3.3.4 Engineered Safety Features (ESF) Logic and Manual Initiation LCO 3.3.4 Two ESF Manual Initiation and two ESF Actuation Logic channels and associated bypass removal channels shall be OPERABLE for each ESF Function specified in Table 3.3.4-1. APPLICABILITY:
According to Table 3.3.4-1. ACTIONS ----------------------------------------------------------1\JOTE-----------------------------------------------------------
Separate Condition entry is allowed for each Function.
COl\JDITIOl\J REQUIRED ACTIOl\J COMPLETIOl\J TIME A. One or more Functions with A.1 Restore channel to 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> one Manual Initiation, Bypass OPERABLE status . Removal, or Actuation Logic channel inoperable.
B. One or more Functions with B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> two Manual Initiation, Bypass Removal, or Actuation Logic Al\JD channels inoperable for Functions 1, 2, 3, or 4. OR B.2 Be in MODE 4. 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> Required Action and associated Completion Time of Condition A not met for Functions 1, 2, 3, or 4 . Palisades l\Juclear Plant 3.3.4-1 Amendment l\Jo.
- *
- ACTIONS CONDITION C. One or more Functions with two Manual Initiation, or Actuation Logic channels inoperable for Functions 5 or 6. OR Required Action and associated Completion Time of Condition A not met for Functions 5 or 6. SURVEILLANCE REQUIREMENTS C.1 AND C.2 ESF Logic and Manual Initiation
3.3.4 REQUIRED
ACTION COMPLETION TIME Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> SURVEILLANCE FREQUENCY SR 3.3.4.1 SR 3.3.4.2 SR 3.3.4.3 Perform functional test of each SIS actuation 92 days channel normal and standby power functions.
Perform a CHANNEL FUNCTIONAL TEST of each 92 days AFAS actuation logic channel. Perform a CHANNEL FUNCTIONAL TEST. 18 months Palisades Nuclear Plant 3.3.4-2 Amendment No.
- ***
- Table 3.3.4-1 (page 1 of 1) ESF Logic and Manual Initiation
3.3.4 Engineered
Safety Features Actuation Logic and Manual Initiation APPLICABLE FUNCTION MODES 1. Safety Injection Signal (SIS)(a) 1,2,3 2. Steam Generator Low Pressure Signal 1 2(d) 3(d) (SGLP)(b)(c)
I I 3. Recirculation Actuation Signal (RAS) 1,2,3 4. Auxiliary Feedwater Actuation Signal (AFAS) 1,2,3 5. Containment High Pressure.Signal (CHP)(c) 1,2,3,4 6. Containment High Radiation Signal (CHR). 1,2,3,4 (a) SIS actuation by Pressurizer Low Pressure may be manually bypassed when pressurizer pressure is 1700 psia. The bypass shall be automatically removed whenever pressurizer pressure is > 1700 psia. * (b) SGLP actuation may be manually bypassed when SG pressure 565 psia. The bypass shall be automatically removed whenever steam generator pressure is > 565 psia. (c) Manual Initiation may be achieved by individual component controls. (d) Not required to be OPERABLE when all Main Steam Isolation Valves (MSIVs) are closed and deactivated, and all Main Feedwater Regulating Valves (MFRVs) and MFRV bypass valves are either closed and deactivated, or isolated by closed manual valves . Palisades Nuclear Plant 3.3.4-3 Amendment No.
- 3.3 INSTRUMENTATION
- 3.3.5 Diesel Generator (DG) -Undervoltage Start (UV Start) LCO 3.3.5 Three channels of Loss of Voltage Function and three channels of Degraded Voltage Function auto-initiation instrumentation and associated logic channels for each DG shall be OPERABLE. . APPLICABILITY:
When associated DG is required to be OPERABLE.
ACTIONS CONDITION . REQUIRED ACTION COMPLETION TIME A. One or more Functions with one channel per DG inoperable.
A.1 Enter applicable Immediately Conditions and Required Actions for the associated.DG made inoperable .DY DG -UV Start instrumentation . SURVEILLANCE REQUIREMENTS SR 3.3.5.1 SURVEILLANCE Perform a CHANNEL FUNCTIONAL TEST on each DG-UV start logic channel. Palisades Nuclear Plant 3.3.5-1 FREQUENCY 18 months Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.3.5.2 SURVEILLANCE Perform CHANNEL CALIBRATION on each Loss of Voltage and Degraded Voltage channel with setpoints as follows: a. Degraded Voltage Function 2187 V and 2264 v Time delay: 0.5 seconds and 0.8 seconds; and b. Loss of Voltage Function 1780 V and 1940 v Time delay: 5.45 seconds and 8.15 seconds at 1400 V . Palisades Nuclear Plant 3.3.5-2 DG -UV Start 3.3.5 FREQUENCY 18 months Amendment No.
Refueling CHR Instrumentation 3.3.6
- 3.3 INSTRUMENTATION
- 3.3.6 Refueling Containment High Radiation (CHR) Instrumentation LCO 3.3.6 Two Refueling CHR Automatic Actuation Function channels and two CHR Manual Actuation Function channels shall be OPERABLE.
APPLICABILITY:
During CORE ALTERATIONS, During movement of irradiated fuel assemblies within containment.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more Functions A.1 Place* the affected 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> with one channel channel in trip. inoperable.
OR A.2.1 Suspend CORE 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> AL TERA TIONS . AND A.2.2 Suspend movement of 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> irradiated fuel assemblies within containment.
B. One or more Functions B.1 Suspend CORE Immediately with two channels AL TERA TIONS. inoperable.
AND B.2 Suspend movement of I rrimediately irradiated fuel assemblies within containment.
Palisades Nuclear Plant 3.3.6-1 Amendment No.
Refueling CHR Instrumentation 3.3.6
- SURVEILLANCE REQUIREMENTS
- SR 3.3.6.1 SR 3:3.6.2 SR 3.3.6.3 SR 3.3.6.4 SURVEILLANCE FREQUENCY Perform a CHANNEL CHECK of each refueling 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> CHR monitor channel. Perform a CHANNEL FUNCTIONAL TEST of each 31 days refueling CHR monitor channel. Perform a CHANNEL FUNCTIONAL TEST of each 18 months CHR Manual Initiation channel. Perform a CHANNEL CALIBRATION of each refueling CHR monitor channel. 18 months Palisades Nuclear Plant 3.3.6-2 Amendment No.
- *
- 3.3 INSTRUMENTATION 3.3.7 Post Accident Monitoring (PAM) Instrumentation PAM Instrumentation 3.3.7 LCO 3.3.7 . The PAM instrumentation for each Function in Table 3.3.7-1 shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, and 3. ACTIONS .
- 1. LCO 3.0.4 is not applicable.
- 2. Separate Condition entry is allowed for each Ftmction.'
CONDITION REQUIRED ACTION *COMPLETION TIME A. One or more Functions A.1 Restore required 30 days with one required channel channel to .OPERABLE inoperable.
status. B. Required Action and B.1 Initiate action in Immediately associated Completion accordance with Time of Condition A not Specification 5.6.6. met. C. --------------NOl"E-------------
Not applicable to hydrogen monitor channels.
' C. 1 Resfore one channel to 7 days One or more Functions OPERABLE status. with two required channels inoperable . Palisades Nuclear Plant 3.3.7-1 Amendment No. l I I I ' \
- ACTIONS CONDITION D. Two hydrogen monitor channels inoperable.
E. Required Action and associated Completion Time of Condition C or D not met. F. As required by Required Action E.1 and referenced in Table 3.3.7-1.
- G. As required by Required Action E.1 and referenced in Table 3.3.7-1 .
- Palisades Nuclear Plant REQUIRED ACTION D. 1 Restore one hydrogen monitor channel to OPERABLE status. E.1 Enter the Condition referenced in Table 3.3.7-1 for the channel. F.1 Be in MODE 3. AND F.2 Be _in MODE 4. G.1 Initiate action in accordance with Specification 5.6.6. 3.3.7-2 PAM Instrumentation
3.3.7 COMPLETION
TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Immediately 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 30 hours Immediately Amendment No.
- *
- SURVEILLANCE REQUIREMENTS PAM Instrumentation 3.3.7 ---------------------------------------------------------l'll()TE------------------------------------------------------------
These SRs apply to each PAM instrumentation Function in Table 3.3.7-1. SURVEILLAl'llCE FREQUEl'llCY SR 3.3.7.1 Perform CHAl'lll'llEL CHECK for each required 31 days SR 3.3.7.2 instrumentation channel that is normally energized.
!'ll()TE------------------------------
l'lleutron detectors are excluded from the CHAl'lll'llEL CALIBRATIOl'll.
Perform CHAl'lll'llEL CALIBRATl()l'll . Palisades l'lluclear Plant 3.3.7-3 18 months Amendment No. --------------------------------
PAM Instrumentation 3.3.7
- Table 3.3.7-1 (page 1 of 1) Post Accident Monitoring Instrumentation CONDITIONS REFERENCED REQUIRED FROM REQUIRED FUNCTION CHANNELS ACTION E.1 1. Primary Coolant System Hot Leg Temperature (wide range) 2 F -2. Primary Coolant System Cold Leg 2 F Temperature (wide range) 3. Wide Range Neutron Flux 2 F 4. Containment Floor Water Level 2 F (wide range) 5. Subcooled Margin Monitor 2 F 6. Pressurizer Level (wide range) 2 F 7. Containment Hydrogen Monitors 2 F 8. Condensate Storage Tank Level 2 F cg: Primary Coolant System Pressure 2 F (wide range)
- 10. Containment Pressure (wide range) 2 F 11. Steam Generator A Water Level 2 F (wide range) 12. Steam Generator B Water Level 2 F (wide range) 13. Steam Generator A Pressure *2 F 14. Steam Generator B Pressure 2 F I 1 per valve<a) 15. Containment Isolation Valve Position F 16. Core Exit Temperature
-Quadrant 1 4 F 17. Core Exit Temperature
-Quadrant 2 4 F 18. Core Exit Temperature
-Quadrant 3 4 F 19. Core Exit Temperature
-Quadrant 4 4 F 20. Reactor Vessel Water Level 2 G 21. Containment Area Radiation 2 G (high range) (a) Not required for isolation valves whose associated penetration is isolated by at least one closed and de-activated automatic valve, closed manual valve, blind flange, or check valve with flow through the valve
- secured. Palisades Nuclear Plant 3.3.7-4 Amendment No.
- -*
- Alternate Shutdown Syst 3. 3.3 INSTRUMENTATION
' 3.3.8 Alternate Shutdown System ' LCO 3.3.8 The Alternate Shutdown System Functions in Table 3.3.8-1 shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, and 3. '-ACTIONS em 3.8
- 1. LCO 3.0.4 is not applicable.
- 2. Separate Condition entry is allowed for each Function.
CONDITION REQUIRED ACTION COMPLETION TIM E A. One or more required A.1 Restore required 30 days Functions inoperable.
Functions to OPERABLE status. B. . Required Action and B.1 Be in MODE 3 . 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND B.2 Be in MODE 4. 1 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> Palisades Nuclear Plant 3.3.8-1 Amendment No.
- * -* SURVEILLANCE REQUIREMENTS SR 3.3.8.1 SR 3.3.8.2 SURVEILLANCE Perform CHANNEL FUNCTIONAL TEST of the Source Range Neutron Flux Function.
Verify each required control circuit and transfer switch is capable of performing the intended function.
Alternate Shutdown System 3.3.8 FREQUENCY Once within 7 days
- prior to each reactor startup 18 months SR 3.3.8.3
- 1. Not required for Functions 16, 17, and 18. 2. Neutron detectors are excluded from the CHANNEL CALIBRATION.
Perform CHANNEL CALIBRATION for each required instrumentation channel. Palisades Nuclear Plant 3.3.8-2 18 months Amendment No.
Alternate Shutdown System 3.3.8
- Table 3.3.8-1 (page 1 of 1) Alternate Shutdown System Instrumentation and Controls FUNCTION, INSTRUMENT REQUIRED OR CONTROL PARAMETER CHANNELS 1. Source Range Neutron Flux ,' 1 2. Pressurizer Pressure 1 3. Pressurizer Level 1 4. Primary Coolant System (PCS) #1 Hot Leg Temperature 1 5. PCS #2 Hot Leg Temperature 1 6. PCS #1 Cold Leg Temperature 1 7. PCS #2 Cold Leg Temperature 1 8. Steam Generator (SG) A Pressure 1 9. SG 8 Pressure 1 10. SG A Wide Range ,Level 1 . 11 . SG 8 Wide Range Level 1
- 12. Safety Injection Refueling Water (SIRW) Tank Level 1 13. Auxiliary Feedwater (AFW) Flow Indication to SG A 1 14. AFW Flow Indication to SG 8 1 15. AFW Low Suction Pressure Alarm (P-88) 1 16. AFW Pump P-88 Steam Supply Valve Control 1 17. AFW Flow Control to SG A 1 18 . AFW Flow Control to SG 8 1
- Palisades Nuclear Plant 3.3.8-3 Amendment No.
- *
- 3.3 INSTRUMENTATION
3.3.9 Neutron
Flux Monitoring Channels Neutron Flux Monitoring Channels 3.3.9 LCO 3.3.9 Two channels of neutron flux monitoring instrumentation shall be OPERABLE.
APPLICABILITY:
MODES 3, 4, and 5. ACTIONS CONDITION A. One or more required channel(s) inoperable.
Palisades Nuclear Plant A.1 A.2 REQUIRED ACTION COMPLETION TIME Suspend all operations Immediately involving positive reactivity additions . Perform SOM verification in accordance with SR 3.1.1.1. 3.3.9-1 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> Once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter Amendment No.
Neutron Flux Monitoring Channels 3.3.9
- SURVEILLANCE REQUIREMENTS
- SR 3.3.9.1 SR 3.3.9.2 SURVEILLANCE Perform CHANNEL CHECK. -----------------------------N()TE------------------------------
Neutron detectors are excluded from the CHANNEL CALIBRATl()N.
Perform CHANNEL CALIBRATl()N . Palisades Nuclear Plant 3.3.9-2 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 18 months Amendment No.
- *
- SURVEILLANCE REQUIREMENTS
3.3 INSTRUMENTATION
ESRV Instrumentation 3.3.10 3.3.10 Engineered Safeguards Room Ventilation (ESRV) Instrumentation LCO 3.3.10 Two channels of ESRV Instrumentation shall be OPERABLE.
APPLICABILITY: . MODES 1, 2, 3, and 4. *ACTIONS -----------------------------------------------------------NOTE----------------------------------------------------------
Separate Condition entry is aliowed for each channel. CONDITION REQUIRED ACTION COMPLETION TIME A. One or more channels inoperable.
A.1 Initiate action to isolate Immediately the associated ESRV System . SURVEILLANCE REQUIREMENTS SR 3.3.10.1 SR 3.3.10.2 SR 3.3.10.3 SURVEILLANCE Perform a CHANNEL CHECK. Perform a CHANNEL FUNCTIONAL TEST. Perform a CHANNEL CALIBRATION.
Verify high radiation setpoint on each ESRV Instrumentation radiation monitoring channel is :.::; 2.2E+5 cpm . Palisades Nuclear Plant 3.3.10-1 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 31 days 18 months Amendment No.
PCS Pressure, Temperature, and Flow DNB Limits 3.4.1
- 3.4 PRIMARY COOLANT SYSTEM (PCS) *
- 3.4.1 PCS Pressure, Temperature, and Flow Departure from Nucleate Boiling (DNB) Limits LCO 3.4.1 PCS DNB parameters for pressurizer pressure, cold leg temperature, and PCS total flow rate shall be within the limits specified below: a. Pressurizer pressure 2010 psia and =s; 2100 psia; b. The PCS cold leg temperature (Tc) shall not exceed the value given by the following equation:
Where: Tc =s; 542.99 + 0.0580(P-2060)
+ 0.00001 (P-2060)2 + 1.125(W-138)-0.0205(W-138) 2 Tc = PCS cold leg temperature in °F P = nominal operation pressure in psia W = total recirculating mass flow in 1 E6 lb/hr corrected to the operating temperature conditions.
NOTE--------------------------------------------
lf the measured primary coolant system flow is greater than 150. O E6 lbm/hr, the maximum Tc shall be less than or equal to the Tc derived at 150.0 E6 lbm/hr. c. PCS total flow 352,000 gpm. APPLICABILITY:
MODE 1. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Pressurizer pressure, PCS A.1 Restore parameter( s) to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> cold leg temperature, or within limit. PCS total flow rate not within limits. B. Required Action and B.1 Be in MODE 2. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. Palisades Nuclear Plant 3.4.1-1 Amendment No:
- PCS Pressure, Temperature, and Flow DNB Limits 3.4.1 SURVEILLANCE REQUIREMENTS SR 3.4.1.1 SR 3.4.1.2 SR 3.4.1.3 SURVEILLANCE Verify pressurizer pressure :::>: 2010 psia and 2100 psia. Verify PCS cold leg temperature 542.99 + 0.0580(P-2060)+
0.00001 (P-2060)2 + 1.125(W-138)-0.0205(W-138) 2* ------------------------------N()TE----------------------------
Not required to be performed until 31 EFPD after THERMAL P()WER is;:: 90% RTP. Verify PCS total flow rate is :::>: 352,000 gpm. Palisades Nuclear Plant 3.4.1-2 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours 18 months After each plugging of 10 or more steam generator tubes Amendment No.
- *
- 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.2 PCS Minimum Temperature for Criticality PCS Minimum Temperature for Criticality 3.4.2 LCO Each PCS loop average temperature (Tave) shall 525°F. APPLICABILITY:
MODE 1 MODE 2 with Kett 1.0. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Tave in one or more PCS loops not within limit. A.1 Be in MODE 2 with Kett 30 minutes < 1.0 . SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.2.1 Verify PCS Tave in each 525°F. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Palisades Nuclear Plant 3.4.2-1 Amendment No.
PCS PIT Limits 3.4.3
- 3.4 PRIMARY COOLANT SYSTEM (PCS) ***
- 3.4.3 PCS Pressure and Temperature (PIT) Limits LCO 3.4.3 PCS pressure, PCS temperature, and PCS heatup and cooldown rates shall be maintained within the limits of Figure 3.4.3-1 and Figure 3.4.3-2. APPLICABILITY:
At all times. ACTIONS CONDITION REQUIR!=D ACTION COMPLETION TIME A. -------------NOTE--------------
A.1 Restore parameter( s) to 30 minutes Required Action A.2 shall within limits. be completed whenever this Condition is entered. AND -----------------------------------
A.2 Determine*
PCS is 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Requirements of LCO not acceptable for met in MODE 1, 2, 3, or 4. continued operation.
B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time of Condition A not AND met. B.2 Be in MODE 5 with 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> PCS pressure < 270 psia . Palisades Nuclear Plant 3.4.3-1
- Amendment No. I I
-*
- ACTIONS CONDITION REQUIRED ACTION C. --------------NOTE-------------
C.1 Initiate action to restore Required Action C.2 shall parameter(s) to within be completed whenever limits. this Condition is entered. -----------------------------------
AND Requirements of LCO not C.2 Determine PCS is met any time in other than acceptable for MODE 1, 2, 3, or 4. continued operation.
SURVEILLANCE REQUIREMENTS SR 3.4.3.1 SURVEILLANCE
NOl"E---------------------------
Only required to be performed during PCS heatup and cooldown operations.
PCS PIT Limits 3.4.3 COMPLETION TIME Immediately Prior to entering MODE4 FREQUENCY Verify PCS pressure, PCS temperature, and PCS 30 minutes heatup and cooldown rates are within the limits of Figure 3.4.3-1 and Figure 3.4.3-2 . Palisades Nuclear Plant 3.4.3-2 Amendment No.
- * ** ([ ..... (/) a.. a) L ::J Ill Ill Q) L a.. L Q) N -L ::J Ill Ill Q) L a.. PCS PIT Limits 3.4.3 2500------------------
2250-+---------+---+----+----1---1--1 8 F/tr -28 F/tr 1750 ......_ 48 F/tr 68 F/tr 1500 -+-Bl F/tr 191 F/tr 1250 1000 RV Inlet Avg. Hrly. Temperature H/U L1m1"t T 170.F 20.F /Hr. 250 T > 170.F 41/J*F /Hr. 350 > T > 250.F 60.F /Hr.* T 350.F 100.F /Hr. *When shutdown cooling_ 1solet1on valves M0-3015 end M0-3016 ere open. PCS rete shell be me1nte1ned S 4!ll*F /Hr. 0 ............
__. ..............
.......,,_.,..,........,,__
__ ,_._,.......,........i-,...
........ ....+-.........
...--.f.-..........
......-l 50 100 150 200 250 300 350 400 450 RV Inlet T empereture, F Figure 3.4.3-1 (page 1 of 1) Pressure -Temperature Limits for Heatups Palisades Nuclear Plant 3.4.3-3 Amendment No.
,.. * * 170"F 35121 > T > 250"F 250 T 350"F 0 ....... ...,...,,...,....
........ .,....,...
........ ..,....,...,._,.......,,...,....
..........................................
_...--t-,,........
.................
..,....,....,.....f PCS P!T Limits 3.4.3 Av8. Hrly. C/ L1m1t. 40"F/Hr. 40"F /Hr. 60"F/Hr. 100"F/Hr.
50 100 150 200 250 300 350 400 450 RV Inlet T empereture, F Figure 3.4.3-2 (page 1 of 1) Pressure -Temperature Limits for Cooldown Palisades Nuclear Plant 3.4.3-4 Amendment No.
- *
- 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.4 PCS Loops -MODES 1 and 2 PCS Loops -MODES 1 and 2 3.4.4 LCO 3.4.4 Two PCS loops shall be OPERABLE and in operation.
APPLICABILITY:
MODES 1 and 2. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Requirements of LCO not A.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> met. SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.4.4.1 Verify each PCS loop is in operation.
12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Palisades Nuclear Plant 3.4.4-1 Amendment No.
- ***
- PCS Loops -MODE 3 3.4.5 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.5 PCS Loops -MODE 3 LCO 3.4.5 APPLICABILITY:
ACTIONS Two PCS loops shall be OPERABLE and one PCS loop shall be in operation.
NOTES------------.------------------------------
- 1. All primary coolant pumps may not be in operation for s; 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> per 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> period, provided:
- a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature.
- 2. Forced circulation (starting the first primary coolant pump) shall not be initiated unless one of the following conditions is met: a. PCS cold leg temperature (Tc) is> 430°f=; b. Steam Generator (SG) secondary temperature is equal to or less than the reactor inlet temperature (Tc); c. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is s: 10°F/hour; or d. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level is s; 57%. MODE 3. CONDITION REQUIRED ACTION COMPLETION TIME A. One required PCS loop inoperable.
Palisades Nuclear Plant A.1 Restore required PCS loop to OPERABLE status . 3.4.5-1 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Amendment No.
- ACTIONS CONDITION REQUIRED ACTION B. Required Action and B.1 Be in MODE 4. associated Completion Time of Condition A not met. C. No PCS loop OPERABLE.
C.1* Suspend all operations involving a reduction of OR PCS boron concentration.
No PCS loop in operation.
AND C.2 Initiate action to restore one PCS loop to OPERABLE status and op.eration . SURVEILLANCE REQUIREMENTS SR 3.4.5.1 SR 3.4.5.2 SR 3.4.5.3 SURVEILLANCE Verify required PCS loop is in operation.
Verify secondary side water level in each steam
-84%. Verify correct breaker alignment and indicated power available to the required primary coolant pump that is not in operation.
Palisades Nuclear Plant 3.4.5-2 PCS Loops -MODE 3 3.4.5 COMPLETION TIME 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Immediately Immediately FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours 7 days Amendment No.
- *
- APPLICABILITY:
Two loops or trains consisting of any combination of PCS loops and Shutdown Cooling (SOC) trains shall be OPERABLE, and either: a. One PCS loop shall be in operation; or b. One SDC train shall be in operation with :?: 2810 gpm flow through the reactor core. -------------------------------------------NOTE:S-------------------------------------------
- 1. All Primary Coolant Pumps (PCPs) and SDC pumps may not be in operation for 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> per 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> period, provided:
- 2. a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature . Forced circulation (starting the first PCP) shall not be initiated unless one of the following conditions is met: a. Steam Generator (SG) secondary temperature is equal to or less than the reactor inlet temperature (Tc), b. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is 10°F/hour, c. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level is _57%. 3. Primary coolant pumps P-50A and P-50B shall not be operated simultaneously.
MODE4. n Palisades Nuclear Plant 3.4.6-1 Amendment No.
- ACTIONS CONDITION A. One PCS loop inoperable.
A.1 AND Two SOC trains inoperable.
B.
- One SOC train inoperable.
B.1 AND
- Two PCS loops inoperable.
OR No PCS loop in operation AND with SOC flow through the reactor core not within C.2.1 limits. C.2.2 Palisades Nuclear Plant REQUIRED ACTION Initiate action to restore a second PCS loop or one SOC train to OPERABLE status.
Initiate action to restore one PCS loop to OPERABLE status and operation.
OR Initiate action to restore one SDC train to OPERABLE status and operation with 281 O gpm flow through the reactor core. 3.4.6-2 PCS Loops -MODE 4 3.4.6 COMPLETION TIME Immediately 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Immediately Immediately Immediately Amendment No.
PCS Loops -MODE 4 3.4.6
- SURVEILLANCE REQUIREMENTS
- SR 3.4.6.1 SR 3.4.6.2 SR 3.4.6.3 SURVEILLANCE FREQUENCY Verify one SOC train is in operation with 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> :2: 2810 gpm flow through the reactor core, or one PCS loop is in operation.
Verify secondary side water level in required SG(s) 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> is :2: -84%. Verify correct breaker alignment and indicated 7 days power available to the required pump that is not in operation . Palisades Nuclear Plant 3.4.6-3 Amendment No.
- **
- PCS Loops -MODE 5, Loops Filled 3.4.7 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4. 7 PCS Loops -MODE 5, Loops Filled LCO 3.4.7 APPLICABILITY:
One Shutdown Cooling (SOC) train shall be OPERABLE and in operation with 281 O gpm flow through the reactor core, and either: a. One additional SOC train shall be OPERABLE; or b. The secondary side water level of each Steam Generator (SG) shall be -84%. -------------------------------------------NOTES-------------------------------------------
- 1. The SOC pump of the train in operation may not be in operation for 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> per 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> period provided:
- 2. a. No operations are permitted that would cause reduction of the PCS boron concentration; and b. Core outlet temperature is maintained at least 10°F below saturation temperature.
Both SOC trains may be inoperable for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing or maintenance provided:
- a. One SOC train is providing the required flow through the reactor core; b. Core outlet temperature is maintained at least 10°F below. saturation temperature; and c. Each SG secondary side water level -84%. 3. Forced circulation (starting the first primary coolant pump) shall not be initiated unless one of the following conditions is met: a. SG secondary temperature is equal to or less than the reactor inlet temperature (Tc); b. SG secondary temperature is < 100°F above Tc, and shutdown cooling is isolated from the PCS, and PCS heatup/cooldown rate is 10°F/hour; or c. SG secondary temperature is< 100°F above Tc, and shutdown cooling is isolated from the PCS, and pressurizer level 57%. 4. Primary coolant pumps P-50A and P-50B shall not be operated simultaneously.
- 5. All SOC trains may not be in operation during planned heatup to MODE 4 when at least one PCS loop is in operation.
MODE 5 with PCS loops filled. Palisades Nuclear Plant 3.4.7-1 Amendment No.
- ACTIONS CONDITION A.. One SOC train inoperable.
A.1 AND . Any SG with secondary OR side water level not within limit. A.2 B. Two SOC trains B.1 inoperable.
- SOC flow through the AND reactor core not within limits. B.2
- Palisades Nuclear Plant PCS Loops -MODE 5, Loops Filled 3.4.1 REQUIRED ACTION COMPLETION TIME Initiate action to restore Immediately a second SOC train to OPERABLE status. Initiate action to restore Immediately SG secondary side water levels to within limits. Suspend all operations Immediately involving reduction
Initiate action to restore Immediately one SOC train to OPERABLE status and operation with 281 0 gpm flow through the reactor core . 3.4.7-2 Amendment No.
- *
- PCS Loops -MODE 5, Loops Filled 3.4.7 SURVEILLANCE REQUIREMENTS SR 3.4.7.1 SR 3.4.7.2 SR 3.4.7.3 SURVEILLANCE Verify one SDC train is in operation with 2810 gpm flow through the reactor core. Verify required SG secondary side water level is -84%. Verify correct breaker alignment and indicated power available to the required SDC pump that is not in operation . Palisades Nuclear Plant 3.4.7-3 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours 7 days Amendment No.
PCS Loops -MODE 5, Loops Not Filled 3.4.8
- LCO 3.4.8 APPLICABILITY:
Two Shutdown Cooling (SOC) trains shall be OPERABLE, and either: a. One SOC train in operation with 2810 gpm flow through the reactor core; or b. One SOC train in operation with 650 gpm flow through the reactor core with two of the three charging pumps incapable of reducing the boron concentration in the PCS below the minimum value necessary to the required SHUTDOWN MARGIN. --------------------------------------
..... -----NOTES-----------------------------------------
- 1. All SOC pumps may not be in operation for s: 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> provided: . a. No operations are permitted that would cause a reduction of the PCS boron concentration;
- b. c. Core outlet temperature is maintained>
10°F below saturation temperature; and
- No draining operations to further reduce the PCS water volume are permitted.
- 2. One SOC train may be inoperable for s: 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing provided the other SOC train is OPERABLE and in operation.
-MODE 5 with PCS loops not filled. Palisades Nuclear Plant 3.4.8-1 Amendment No.
- *
- PCS Loops -MODE 5, Loops Not Filled 3.4.8 ACTIONS CONDITION REQUIRED ACTION A. One SOC train inoperable.
A.1 Initiate action to restore SOC train to OPERABLE status. B. Two SOC trains B.1 Suspend all operations inoperable.
involving reduction of PCS boron OR concentration.
SOC flow through the AND reactor core not within limits. B.2 Initiate action to restore one SOC train to OPERABLE status and operation with SOC flow through the reactor core within limit. SURVEILLANCE REQUIREMENTS SR 3.4.8.1 SURVEILLANCE
NOTE---------------------------
On ly required to be met when complying with LCO 3.4.8.a. Verify one SOC train is in operation with 2810 gpm flow through the reactor core . Palisades Nuclear Plant 3.4.8-2 COMPLETION TIME Immediately Immediately Immediately I FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No. -----------------------------
- *
- PCS Loops -MODE 5, Loops Not Filled 3.4.8 SURVEILLANCE REQUIREMENTS SR 3.4.8.2 SR 3.4.8.3 SR 3.4.8.4 SURVEILLANCE Only required to be met when complying with LCO 3.4.8.b. Verify one SOC train is in operation with 650 gpm flow through the reactor core. --------------------------------NOTE--------------------------
Only required to be met when complying with LCO 3.4.8.b. Verify two of three charging pumps are incapable of reducing the boron concentration in the PCS below the minimum value necessary to maintain the required SHUTDOWN MARGIN .. Verify correct breaker alignment and indicated power available to the SOC pump that is not in operation . Palisades Nuclear Plant 3.4.8-3 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours 7 days Amendment No.
Pressurizer 3.4.9
- 3.4 PRIMARY COOLANT SYSTEM (PCS) *
- 3.4.9 Pressurizer LCO 3.4.9 APPLICABILITY:
ACTIONS The pressurizer shall be OPERABLE with: a. Pressurizer water level < 62.8%; ---------------------------------------------NOTE:-------------------------------------------
The pressurizer water level limit does not apply in MODE: 3 until after a bubble has been established in the pressurizer and the pressurizer water level has been lowered to within its normal operating band. b. 375 kW of pressurizer heater capacity available from electrical bus 1 D, and c. 375 kW of pressurizer heater capacity available from electrical bus 1 E: with the capability of being powered from an emergency power supply . MODE:S 1, 2, and 3. CONDITION RE:QUIRE:D ACTION COMPLE:TION TIME: A. Pressurizer water level not A.1 within limit. A.2 Palisades Nuclear Plant Be in MODE: 3 with reactor tripped. Be in MODE: 4. 3.4.9-1 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 30 hours Amendment No.
i ,j ' ' I * *
- ACTIONS CONDITION REQUIRED ACTION B. < 375 kW pressurizer B.1 Restore required heater capacity available pressurizer heaters to from electrical bus 1 D, or OPERABLE status. electrical bus 1 E, OR Required pressurizer heater capacity from electrical bus 1 E not capable of being powered from an emergency power supply. C. Required Action and C. 1 Be in MODE 3. associated Completion Time of Condition B not AND met. C.2 Be in MODE 4. SURVEILLANCE REQUIREMENTS SR 3.4.9.1 SURVEILLANCE
:..---------------NOTE---------------------------
Not required to be met until 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> after establishing a bubble in the pressurizer and the pressurizer water level has been lowered to within its normal operating band. Verify pressurizer water level is < 62.8% . Palisades Nuclear Plant 3.4.9-2 Pressurizer
3.4.9 COMPLETION
TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 6 hours 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.4.9.2 *
- Verify the capacity of pressurizer heaters from electrical bus 1 D, and electrical bus 1 Eis SR 3.4.9.3 ;:: 375 kW. Verify the required pressurizer heater capacity from electrical bus 1 Eis capable of being powered from an emergency power supply . Palisades Nuclear Plant 3.4.9-3 Pressurizer
3.4.9 FREQUENCY
18 months *18 months Amendment No.
Pressurizer Safety Valves 3.4.10
- 3.4 PRIMARY COOLANT SYSTEM (PCS) *
- 3.4. 1 O Pressurizer Safety Valves LCO 3.4.10 Three pressurizer safety valves shall be OPERABLE with lift settings as specified in Table 3.4.10-1.
APPLICABILITY:
MODES 1 and 2, MODE 3 with all PCS cold leg 430°F. ACTIONS CONDITION ACTION A. One pressurizer safety A.1 Restore valve to
- valve inoperable.
OPERABLE status. \ B. Required Action and B.1 Be in MODE 3. . associated Completion Time not met. AND OR B.2 Reduce any PCS cold Two or more pressurizer leg temperature safety valves inoperable.
< 430°F. SURVEILLANCE REQUIREMENTS SR 3.4.10.1 SURVEILLANCE Verify each pressurizer safety valve is OPERABLE in accordance with the lnservice Testing Program. Following testing, lift settings shall be within +/- 1 % of required setpoint.
Palisades Nuclear Plant 3.4.10-1 COMPLETION TIME 15 minutes 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> ' 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> FREQUENCY In accordance with the lnservice Testing Program Amendment No.
- *
- Table 3.4.10-1 (page 1 of 1) Pressurizer Safety Valve Lift Settings Pressurizer Safety Valves 3.4.10 VALVE NUMBER LIFT SETTING (psia +/- 3%) RV-1039 2580 RV-1040 2540 RV-1041 2500 Palisades Nuclear Plant 3.4.10-2 Amendment No.
- *
- 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.11 Pressurizer Power Operated Relief Valves (PO RVs) Pressurizer PORVs 3.4.11 LCO 3.4.11 Each PORV and associated block valve shall be OPERABLE.
APPLICABILITY:
MODES 1 and 2, MODE 3 with all PCS cold leg temperatures;::
430°F. ACTIONS -----------------------------------------------------------NOTES--------------------------------------------------------1 . Separate Condition entry is allowed for each PORV. 2. LCO 3.0.4 is not applicable.
CONDITION REQUIRED ACTION COMPLETION TIME A. One PORV inoperable.
A.1 Close associated block 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> valve. AND A.2 Restore PORV to 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> OPERABLE status. B. One block valve 8.1 Place associated PORV 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> inoperable.
in manual control. AND B.2 Restore block valve to 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> OPERABLE status . Palisades Nuclear Plant 3.4.11-1 Amendment No.
- ACTIONS CONDITION C. Two PORVs inoperable.
C. 1 AND C.2 D. Two block valves D. 1 inoperable. ( AND D.2
- E. Required Action and E.1 associated Completion Time not met.
- Palisades Nuclear Plant REQUIRED ACTION Close associated block valves. Restore at least one PORV to OPERABLE status. Place-associated PORVs in manual control. Restore at least one block valve to OPERABLE status. Be in MODE 3. 3.4.11-2 Pressurizer PORVs 3.4.11 COMPLETION TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 2 hours 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 2 hours -6 hours Amendment No.
- SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.4.11.1 Perform a complete cycle of each block valve. Pressurizer PORVs 3.4.11 FREQUENCY Once prior to entering MODE 4 from MODE 5 if not performed within previous 92 days SR 3.4.11.2 Perform a complete cycle of each PORV with PCS 18 months average temperature>
200°F . *
- Palisades Nuclear Plant 3.4.11-3 Amendment No.
LTOP System 3.4.12
- 3.4 PRIMARY COOLANT SYSTEM (PCS) *
- 3.4.12 Low Temperature Overpressure Protection (LTOP) System LCO 3.4:12 APPLICABILITY:
ACTIONS An L TOP System shall be OPERABLE with: a. Both High Pressure Safety Injection (HPSI) pumps incapable of injecting into the PCS, and ------------------------------------------NOTES--------------------------------------------. 1. LCO 3.4.12.a is only required when any PCS cold leg temperature is< 300°F. 2. LCO 3.4.12.a does not prohibit the use of the HPSI pumps for emergency addition of makeup to the PCS. b. One of the following pressure relief capabilities:
- 1. 2. Two Power Operated Relief Valves (PORVs) with lift settings as specified in Figure 3.4.12-1; or The PCS depressurized and a PCS vent capable of 167 gpm at a pressure of 315 psia. MODE 3 when any PCS cold leg temperature is< 430°F, MODES 4 and 5, MODE 6 when the reactor vessel head is on.
LCO 3.0.4 is not applicable.
CONDITION A. One or two HPSI pumps capable of injecting into the PCS. A.1 REQUIRED ACTION COMPLETION TIME Initiate action to verify Immediately no HPSI pump is capable of injecting into the PCS . Palisades Nuclear Plant 3.4.12-1 Amendment No.
- ACTIONS CONDITION B. One required PORV inoperable and pressurizer water level :o; 57%. C. One required PORV inoperable and pressurizer water level> 57%. D. Two required PORVs inoperable.
/ OR Required Action and
- associated Completion Time not met. OR L TOP System inoperable for any reason other than Condition A, B, or C.
- Palisades Nuclear Plant REQUIRED ACTION B.1 Restore required PORV to OPERABLE status. C. 1 Restore required PORV to OPERABLE status. D.1 Depressurize PCS and establish PCS vent capable of relieving 167 gpm at a PCS pressur:e of 315 psia. 3.4.12-2 LTOP System 3.4.12 COMPLETION TIME 7 days 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> 8 hours ' \ Amendment No.
LTOP System 3.4.12
- SURVEILLANCE REQUIREMENTS
- SR 3.4.12.1 SR 3.4.12.2 SR 3.4.12.3 SR 3.4.12.4 SR 3.4.12.5 SURVEILLANCE
NOTE---------------------------
Only required to be met when complying with LCO 3.4.12.a.
FREQUENCY Verify both HPSI pumps are incapable of injecting 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> into the PCS. Verify required PCS vent, capable of relieving 167 gpm at a PCS pressure of 315 psia, is open. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> for unlocked open vent valve(s) 31 days for locked open vent valve( s) Verify PORV block valve is open for each required 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> PORV.
Not required to be performed until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> after decreasing any PCS cold leg temperature to < 430°F. Perform CHANNEL FUNCTIONAL TEST on each 31 days required PORV, excluding actuation.
Perform CHANNEL CALIBRATION on each required PORV actuation channel. 18 months Palisades Nuclear Plant 3.4.12-3 Amendment No.
- * * <C -CJ) CL. . ., L :J Cit Cit .,, L a.. L Q) -L :J .,, .,, ., L a.. 1750 1500 1250 1000 750 LTOP System 3.4.12 0+-i'""'""'.--i-...-...-....+
...........................
......; ....... '""'""'...+-....-...-+-w-
.......
50 100 150 200 250 300 350 400 450 RV Inlet. T empe,.otu,.e, F Figure 3.4.12-1 (page 1 of 1) L TOP Setpoint Limit Palisades Nuclear Plant 3.4.12-4 Amendment No.
PCS Operational LEAKAGE 3.4.13
- 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.13 PCS Operational LEAKAGE *
- LCO 3.4.13 PCS operational LEAKAGE shall be'limited to: a. No pressure boundary LEAKAGE; b. 1 gpm unidentified LEAKAGE; c. 10 gpm identified LEAKAGE; and d. 432 gallons per day primary to secondary LEAKAGE through any one SG. APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. PCS LEAKAGE not within A.1 Reduce LEAKAGE to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> limits for reasons other within limits. than pressure boundary LEAKAGE. B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND OR B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Pressure boundary -LEAKAGE exists . Palisades Nuclear Plant 3.4.13-1 Amendment No.
PCS Operational LEAKAGE 3.4.13
- SURVEILLANCE REQUIREMENTS
- SURVEILLANCE FREQUENCY SR 3.4.13.1 -------------------------------N()TE---------------------------
NOTE---------
SR 3.4.13.2 Not required to be performed in MODE 3 or 4 until 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> of steady state operation.
Verify PCS operational LEAKAGE is within limits by performance of PCS water inventory balance. Verify SG tube integrity is in accordance with the Steam Generator Tube Surveillance Program. Palisades Nuclear Plant 3.4.13-2 Only required to be performed during steady state operation 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> In accordance with the Steam Generator Tube Surveillance Program Amendment No.
,.....----------------------------------------
PCS PIV Leakage 3.4.14
- 3.4 PRIMARY COOLANT SYSTEM (PCS) *
- 3.4.14 PCS Pressure Isolation Valve (PIV) Leakage LCO 3.4.14 Leakage from each PCS PIV shall be within limits and both Shutdown Cooling (SOC) suction valve interlocks shall be OPERABLE.
APPLICABILITY:
fv,'IODES 1, 2, and 3, MODE 4, except during the SOC mode of operation, or transition to or from, the SOC mode of operation.
ACTIONS ----------------------------------------------------------NOTES---------------------------------------------------------1 . Separate Condition entry is allowed for each flow path. 2. Enter applicable Conditions and Required Actions for systems made inoperable by an inoperable PIV . CONDITION A. One or more flow paths with leakage from one or more PCS PIVs not within limit.
- Palisades Nuclear Plant REQUIRED ACTION ------------------NOTE------------------
Each valve used to satisfy Required Action A.1 must have been verified to meet SR 3.4.14.1 and be on the PCS pressure boundary or the high pressure portion of the system. 3.4.14-1 COMPLETION TIME (continued)
Amendment No.
- ACTIONS CONDITION A. (continued)
A.1 AND A.2 B. Required Action and B.1 associated Completion
- Time for Condition A not AND . met. B.2 C. One or both SOC suction C. 1 valve interlocks inoperable.
- Palisades Nuclear Plant REQUIRED ACTION Isolate the high pressure portion of the affected system from the low pressure portion by use of one closed manual, deactivated automatic, or check valve. Restore PCS PIV to within limits. ' Be in MODE 3. Be in MODE 5. Isolate the affected penetration by use of one closed deactivated valve . 3.4.14-2 PCS PIV Leakage 3.4.14 COMPLETION TIME 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> 72 hours 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.4.14.1 SURVEILLANCE
N()TES--------------------------
- 1. Only required to be performed in M()DES 1 and 2. 2. Leakage rates ::;; 5.0 gpm are unacceptable if the latest measured rate exceeded the rate determined by the previous test by an amount that reduces the margin between measured leakage rate and the maximum permissible leakage rate of 5.0 gpm by 50% or greater. 3. Minimum test differential pressure shall not be less than 150 psid. Verify leakage from each PCS PIV is equivalent to ::;; 5 gpm at a PCS pressure of 2060 psia . PCS PIV Leakage 3.4.14 FREQUENCY 18 months Once prior to entering MODE 2 whenever the plant has been in MODE 5 for 7 days or more, if leakage
- testing has not been performed in the* previous 9 months SR 3.4.14.2 Verify each SDC suction valve interlock prevents its 18 months associated valve from being opened with a simulated or actual PCS pressure signal 280 psia.
- Palisades Nuclear Plant 3.4.14-3 Amendment No.
- * ** SURVEILLANCE REQUIREMENTS SR 3.4.14.3 SURVEILLANCE
N()TE----------------------------
()nly required to be performed in M()DES 1 and 2. Verify each of the four Low Pressure Safety Injection (LPSI) check valves are closed. Palisades Nuclear Plant 3.4.14-4 PCS PIV Leakage 3.4.14 FREQUENCY Prior to entering M()DE 2 after each use of the LPSI check valves for soc Amendment No.
PCS Leakage Detection Instrumentation 3.4.15
- LCO 3.4.15 Three of the following PCS leakage detection instrumentation channels shall be OPERABLE:
- a. One containment sump level indicating channel; b. One containment atmosphere gaseous activity monitoring channel; c. One containment air cooler condensate level switch channel; d. One containment atm9sphere humidity monitoring channel. APPLICABILITI:
MODES 1, 2, 3, and 4. ACTIONS -----------------------------------------------------------NOTE----------------------------------------------------------
LCO 3.0.4 is not applicable . CONDITION REQUIRED ACTION COMPLETION TIME A. One or two required leak A.1 Perform SR 3.4.13.1 Once per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> detection instrument (PCS water inventory channels inoperable.
balance).
AND A.2 Restore inoperable 30 days channel(s) to OPERABLE status. B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Palisades Nuclear Plant 3.4.15-1 Amendment No.
- **
- PCS Leakage Detection Instrumentation 3.4.15 ACTIONS CONDITION C. All required channels inoperable.
REQUIRED ACTION C.1 Enter LCO 3.0.3. SURVEILLANCE REQUIREMENTS SR 3.4.15.1 SURVEILLANCE Perform CHANNEL CHECK of the required containment sump level indicator.
COMPLETION TIME Immediately FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> SR 3.4.15.2 Perform CHANNEL CHECK of the required 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> SR 3.4.15.3 SR 3.4.15.4 containment atmosphere gaseous activity monitor . Perform CHANNEL CHECK of the required containment atmosphere humidity monitor. Perform CHANNEL FUNCTIONAL TEST of the required containment air cooler condensate level switch. 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 18 months SR 3.4.15.5 Perform CHANNEL CALIBRATION of the required 18 months containment sump level indicator . Palisades Nuclear Plant 3.4.15-2 Amendment No.
- *
- PCS Leakage Detection Instrumentation 3.4.15 SURVEILLANCE REQUIREMENTS SR 3.4.15.6 SR 3.4.15.7 SURVEILLANCE FREQUENCY Perform CHANNEL CALIBRATION of the required 18 months containment atmosphere gaseous activity monitor. Perform CHANNEL CALIBRATION of the required 18 months containment atmosphere humidity monitor . Palisades Nuclear Plant 3.4.15-3 Amendment No.
- *
- 3.4 PRIMARY COOLANT SYSTEM (PCS) 3.4.16 PCS Specific Activity PCS Specific Acti.vity 3.4.16 LCO 3.4.16 The specific activity of the primary coolant shall be within limits. APPLICABILITY:
MODES 1 and 2, MODE 3 with PCS average temperature (Tave) 500°F. ACTIONS CONDITION A. DOSE EQUIVALENT 1-131 > 1.0 µCi/gm. Palisades Nuclear Plant REQUIRED ACTION -----------------NOTE-------------------
LCO 3.0.4 is not applicable.
A.1 A.2 Verify DOSE . EQUIVALENT 1-131 < 40 µCi/gm. Restore DOSE EQUIVALENT 1-131 to within limit. 3.4.16-1 COMPLETION TIME Once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> 48 hours Amendment No.
- ACTIONS CONDITION B. Required Action and associated Completion Time of Condition A not met.
- DOSE EQUIVALENT 1-131 40 µCi/gm. OR Gross specific activity of the primary coolant not within limit. 8.1 REQUIRED ACTION Be in MODE 3 with Tave < 500°F.
- SURVEILLANCE REQUIREMENTS SR 3.4.16.1 SURVEILLANCE
- Verify primary coolant gross specific activity . ::; 100/E µCi/gm. Palisades Nuclear Plant 3.4.16-2 PCS Specific Activity 3.4.16 COMPLETION TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> FREQUENCY.
7 days Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.4.16.2 SR 3.4.16.3 SURVEILLANCE Only required to be performed in M()DE 1. Verify primary coolant D()SE EQUIVALENT 1-131 specific activity s 1.0 µCi/gm. -------------------------------1\J()TE---------------------------
l\J ot required to be performed*
until 31 days after a minimum of 2 EFPD and 20 days of MODE 1 operation have elapsed sinc.e the reactor was last subcritical for 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> .. PCS Specific Activity 3.4.16 FREQUENCY 14 days Once between 2 and 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> after * . THERMAL POWER change of 15% RTP within a 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> period Determine E from a sample taken in MODE 1 after 184 days a minimum of 2 EFPD and 20 days of MODE 1 operation have elapsed since the reactor was last subcritical for 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> . Palisades l\Juclear Plant 3.4.16-3 Amendment l\Jo. I
- 3.5 EMERGENCY CORE COOLING SYSTEMS (ECCS) 3.5.1 Safety Injection Tanks (SITs) LCO 3.5.1 Four SITs shall be OPERABLE.
APPLICABILITY:
MODES 1 and 2. ACTIONS CONDITION REQUIRED ACTION A. One SIT inoperable due to A.1 Restore boron boron concentration not concentration to within within limits . limits.
- B. One SIT inoperable for B.1 Restore SIT to reasons other than OPERABLE status. Condition A. C. Required Action and C.1 Be in MODE 3. associated Completion Time of Condition A or B not met. D. Two or more SITs D.1 Enter LCO 3.0.3. inoperable .
- Palisades Nuclear Plant 3.5.1-1 SI Ts 3.5.1 COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 1 hour 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Immediately Amendment No.
- SURVEILLANCE REQUIREMENTS
- SR 3.5.1.1 SR 3.5.1.2 SR 3.5.1.3 SR 3.5.1.4 SR 3.5.1.5 SURVEILLANCE Verify each SIT isolation valve is fully open. Verify borated water volume in each SIT is ;;>: 1040ft 3 and :s: 1176ft 3. Verify nitrogen cover pressure in each SIT is ;;>: 200 ps:ig. Verify boron concentration in each SIT is ;;>: 1720 ppm and :s: 2500 ppm . Verify power is removed from each SIT isolation valve operator . Palisades Nuclear Plant 3.5.1-2 SI Ts 3.5.1 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 12 hours 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 31 days 31 days Amendment No.
- 3.5 EMERGENCY CORE COOLING SYSTEMS (ECCS) 3.5.2 ECCS -Operating LCO 3.5.2 Two ECCS trains shall be OPERABLE.
APPLICABILITY:
MODES 1 and 2, ECCS -Operating 3.5.2 MODE 3 with Primary Coolant System (PCS) temperature 2: 325°F. *
- ACTIONS CONDITION A. One or more ECCS trains A.1 B. inoperable.
At least 100% of the required ECCS flow available.
Required Action and associated Completion Time not met. Palisades Nuclear Plant B.1 AND B.2 REQUIRED ACTION Restore train(s) to OPERABLE status. Be in MODE 3. Reduce PCS temperature to< 325°F . 3.5.2-1 COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 6 hours 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Amendment No.
- SURVEILLANCE REQUIREMENTS SR 3.5.2.1 SURVEILLANCE Verify the following valves and hand switches are in the open position.
Valve/Hand Switch Number CV-3027 HS-3027A HS-30278 CV-3056 HS-3056A HS-30568 Function SIRWT Recirc Valve Hand Switch For CV-3027 Hand Switch For CV-3027 SIRWT Recirc Valve Hand Switch For CV-3056 Hand Switch For CV-3056 ECCS -Operating
3.5.2 FREQUENCY
12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> SR 3.5.2.2 Verify each ECCS manual, power operated, and 31 days *
- SR 3.5.2.3 SR 3.5.2.4 SR 3.5.2.5 automatic valve in the flow path, that is not locked, sealed, or otherwise secured in position, is in the correct position.
Verify CV-3006, "SOC Flow Control Valve," is open and its air supply is isolated.
Verify each ECCS pump's developed head at the test flow point is greater than or equal to the required developed head. Verify each ECCS automatic valve that is not locked, sealed, or otherwise secured in position, in the flow path actuates to the correct position on an actual or simulated actuation signal. Palisades Nuclear Plant 3.5.2-2 31 days In accordance with the lnservice Testing Program 18 months Amendment No.
- *
- ECCS -Operating
3.5.2 SURVEILLANCE
REQUIREMENTS SR 3.5.2.6 SR 3.5.2.7 SR 3.5.2.8 SR 3.5.2.9 SURVEILLANCE FREQUENCY Verify each ECCS pump starts automatically on an 18 months actual or simulated actuation signal. Verify each LPSI pump stops on an actual or simulated actuation signal. Verify, for each ECCS throttle valve listed below, each position stop is in the correct position.
Valve Number M0-3008 M0-3010 M0-3012 M0-3014 M0-3082 M0-3083 Function LPSI to Cold leg 1A LPSI to Cold leg 1 B LPSI to Cold leg 2A LPSI to Cold leg 28 HPSI to Hot leg 1 HPSI to Hot leg 1 18 months 18 months Verify, by visual inspection, each ECCS train 18 months containment sump suction inlet is not restricted by debris and the suction inlet screens show no evidence of structural distress or abnormal corrosion . Palisades Nuclear Plant 3.5.2-3 Amendment No.
- * ** 3.5 EMERGENCY CORE COOLING SYSTEMS (ECCS) 3.5.3 ECCS -Shutdown ECCS -Shutdown 3.5.3 LCO 3.5.3 One Low Pressure Safety Injection (LPSI) train shall be OPERABLE.
NOTE----------------------------------------------
A LPSI train may be considered OPERABLE during alignment and operation for shutdown cooling if capable of being manually realigned to the ECCS mode of operation.
- APPLICABILITY:
MODE 3 with Primary Coolant System (PCS) temperature,<
325°F, MODE 4. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Required LPSI train inoperable.
A.1 Initiate action to restore Immediately one LPSI train to OPERABLE status. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.5.3.1 The following SRs of Specification 3.5.2, "ECCS -Operating," are applicable:
SR 3.5.2.2 SR 3.5.2.4 Palisades Nuclear Plant SR 3.5.2.9 3.5.2-4 FREQUENCY In accordance with applicable SRs Amendment No.
- 3.5 EMERGENCY CORE COOLING SYSTEMS (ECCS) 3.5.4 Safety Injection Refueling Water Tank (SIRWT) LCO 3.5.4 The SIRWT shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A. SIRWT boron A.1 Restore SIRWT to concentration not within OPERABLE status. limits. OR
- SIRWT borated water temperature not within limits. 8. SIRWT inoperable for B.1 Restore SIRWT to reasons other than OPERABLE status. Condition A. C. Required Action and C. 1 Be in MODE 3. associated Completion Time not met. AND C.2 Be in MODE 5.
- Palisades Nuclear Plant 3.5.4-1 SIRWT 3.5.4 COMPLETION TIME 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> 1 hour 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours Amendment No.
SIRWT 3.5.4
- SURVEILLANCE REQUIREMENTS
- SR 3.5.4.1 SR 3.5.4.2 SR 3.5.4.3 SR 3.5.4.4 SURVEILLANCE FREQUENCY Verify SIRWT borated water temperature is 2 40°F 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> and::;; 100°F. --------------------------------N()TE--------------------------
()nly required to be met in M()DES 1, 2, and 3. Verify SIRWT borated water volume is 2 250,000 gallons. --------------------------------N()TE--------------------------
()nly required to be met in M()DE 4 . Verify SIRWT borated water volume is 2 200,000 gallons. Verify SIRWT boron concentration is 2 1720 ppm and ::;; 2500 ppm . 7 days 7 days 31 days Palisades Nuclear Plant 3.5.4-2 Amendment No.
TSP 3.5.5
- 3.5 EMERGENCY CORE COOLING SYSTEMS (ECCS) 3.5.5 Trisodium Phosphate (TSP) *
MODES 1, 2, and 3. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. TSP not within limits. A.1 Restore TSP to within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> limits . B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND B.2 Be in MODE 4. 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.5.5.1 Verify the TSP baskets contain ;;>: 8,300 lbs and 18 months 11,000 lbs of TSP. SR 3.5.5.2 Verify that a sample from the TSP baskets provides 18 months adequate pH adjustment of borated water . Palisades Nuclear Plant 3.5.5-1 Amendment No.
- I
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A. Containment inoperable.
A.1 Restore containment to OPERABLE status. _, B . Required Action and B.1 Be in MODE 3. associated Completion Time not met. AND 8.2 Be in MODE 5. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.6.1.1 Perform required visual examinations and Type A leakage *rate testing in accordance with the Containment Leak Rate Testing Program. Palisades Nuclear Plant 3.6.1-1 Containment
3.6.1 COMPLETION
TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 6 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> ' FREQUENCY In accordance with the Containment Leak Rate Testing Program* Amendment No. i I I
-* ** * ---------SURVEILLANCE REQUIREMENTS SR 3.6.1.2 SR 3.6.1.3 SURVEILLANCE Verify containment structural integrity in accordance with the Containment Structural Integrity Surveillance Program. ------------------------------N()"fE----------------------------
Containment
3.6.1 FREQUENCY
In accordance with the Containment Structural Integrity Surveillance Program -----------N
()TE--------
Local leak rate tests shall be performed at SR 3.0.2 is not 55 psig. applicable.
Perform required Type B and C leakage rate testing, except for containment air lock testing, in accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions. "fhe leakage rate acceptance criterion is s 1.0 La. However, during the first unit startup following testing performed in accordance with 10 CFR 50, Appendix J, ()ption A, as modified by approved exemptions, the leakage rate acceptance criteria are < 0.6 La for the Type B and Type C tests . Palisades Nuclear Plant 3.6.1-2 In accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions Amendment No.
Containment Air Locks 3.6.2
- 3.6 CONTAINMENT SYSTEMS *
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS
- 1. Entry and exit is permissible through a "locked" air lock door to perform repairs on the affected air lock components.
- 2. Separate Condition entry is allowed for each air lock. 3. Enter applicable Conditions and Required Actions of LCO 3.6.1, "Containment," when leakage results in exceeding the overall containment leakage rate acceptance criteria.
CONDITION A. .One or more containment air locks with one containment air lock door inoperable.
Palisades Nuclear Plant REQUIRED ACTION ------------------NOTES----------------
- 1. Required Actions A.1, A.2, and A.3 are not applicable if both doors in the same air lock are inoperable and . Condition C is entered. 2. Entry and exit is permissible for 7 days under administrative controls if both air locks are inoperable.
A.1 Verify the OPE.RABLE door is closed in the affected air lock. 3.6.2-1 COMPLETION TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> (continued)
Amendment No.
- ACTIONS CONDITION A (continued) ,
- B. One or more containment air locks with containment air lock interlock mechanism inoperable.
- Palisades Nuclear Plant REQUIRED ACTION A.2 Lock the OPERABLE door closed in the affected air lock. AND --------------------NOTE------------------
Air lock doors in high radiation areas may be verified locked closed by administrative means. ----------------------------------------------
A.3 Verify the OPERABLE door is locked closed in the affected air lock .
- 1.
- Required Actions B.1, B.2, and B.3 are not applicable if both doors in the same air lock are inoperable and Condition C is entered. 2. Entry and exit of containment is permissible under the control of a dedicated in.dividual.
8.1 Verify
an OPERABLE door is closed in the affected air lock. AND 3.6.2-2 Containment Air Locks 3.6.2 COMPLETION TIME 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Once per 31 days 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> (continued)
Amendment No.
- ACTIONS CONDITION B. (continued)
- C. One or more containment air locks inoperable for reasons other than Condition A or B. D. Required Action and associated Completion Time not met.
- Palisades Nuclear Plant REQUIRED ACTION B.2 Lock an OPERABLE door closed in the affected air lock. AND --------------------NOTE------------------
Air lock doors in high radiation areas may be verified locked closed by administrative means. ----------------------------------------------
B.3 Verify an OPERABLE door is locked closed in the affected air lock . C. 1 Initiate action to evaluate overall containment.
leakage rate per LCO 3.6.1. AND C.2 Verify a door is closed in the affected air lock. AND C.3 Restore air lock to OPERABLE status. D. 1 Be in MODE 3. AND D.2 Be in MODE 5. 3.6.2-3 Containment Air Locks 3.6.2 COMPLETION TIME 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Once per 31 days Immediately 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 24 hours 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours Amendment No.
- *
- Palisades Nuclear Plant 3.6.2-4 Containment Air Locks 3.6.2 Amendment*
No.
- SURVEILLANCE REQUIREMENTS
- SR 3.6.2.1 SURVEILLANCE
- 1. An inoperable air lock door does not invalidate the previous successful performance of the overall air lock leakage test. 2. Results shall be evaluated against acceptance criteria of SR 3.6.1.3 in accordance with 10 CFR 50, Appendix J, as modified by approved exemptions.
- 3. A seal contact check shall be performed on the emergency escape air lock following each full pressure test. Emergency escape air lock door opening, solely for the purpose of strongback removal and performance of the seal contact check, does not necessitate additional pressure testing. 4 . Local leak rate tests, other than personnel air lock doors between the seals test, shall be performed at 55 psig.
- Perform required air lock leakage rate testing in accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions.
The acceptar:ice criteria for air lock testing are: a. Overall air lock leakage rate is 1.0 L 2 when tested at Pa and combined with all penetrations and valves subjected to Type B and C tests. However, during the first unit startup following testing performed in accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions, the leakage rate acceptance criteria is < 0.6 La when combined with all penetrations and valves subjected to Type B and C tests . Palisades Nuclear Plant 3.6.2-5 Containment Air Locks 3.6.2 FREQUENCY
NOTE----------
SR 3.0.2 is not applicable In accordance with 10 CFR 50, Appendix J, Option A, as modified by approved exemptions (continued)
Amendment No.
- SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.6.2.1 (continued)
- b. For each personnel air lock door between the seals test, leakage rate is :s; 0.023 La when tested at 10.0 psig. c. An acceptable emergency escape air lock door seal contact check consists of a verification of continuous contact between the seals and the sealing surfaces.
Containment Air Locks 3.6.2 FREQUENCY SR 3.6.2.2 Verify only one door in the air lock can be opened 18 months at a time . Palisades Nuclear Plant 3.6.2-6 Amendment No.
- *
- 3.6 CONTAINMENT SYSTEMS 3.6.3 Containment Isolation Valves Containment Isolation Valves 3.6.3 LCO 3.6.3 Each containment isolation valve shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS -----------------------------------------------------------NOTES--------------------------------------------------------
- 1. Penetration flow paths, except for 8 inch purge exhaust valves and 12 inch air room supply valves penetration flow paths, may be unisolated intermittently under administrative controls.
- 2. Separate Condition entry is allowed for each penetration flow path. 3. Enter applicable Conditions and Required Actions for system(s) made inoperable by containment isolation valves. 4. Enter applicable Conditions and Required Actions of LC() 3.6.1, "Containment," when leakage results in exceeding the overall containment leakage rate acceptance criteria.
CONDITION A. --------------NO"T"E-------------
A.1 Only applicable to penetration flow paths with two containment isolation valves. One or more penetration flow paths with one containment isolation valve inoperable (except for AND purge exhaust valve or air room supply valve not locked closed) . Palisades Nuclear Plant REQUIRED AC"fl()N COMPLETION TIME Isolate the.affected 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> penetration flow path by use of at least one closed and de-activated automatic valve, closed manual valve, blind flange, or check valve with flow through the valve secured. (continued) 3.6.3-1 Amendment No.
- ACTIONS CONDITION A. (continued)
- 8. --------------NOTE-------------
Only applicable to penetration flow paths with two containment isolation valves. -----------------------------------
One or more penetration flow paths with two containment isolation valves inoperable (except for purge exhaust valve or air room supply valve not locked closed) .
- Palisades Nuclear Plant Containment Isolation Valves 3.6.3 REQUIRED ACTION COMPLETION TIME ----------*---------NOTE----------------
Isolation devices in high radiation areas may be verified by use of administrative means. ---------------------------------------------
A.2 Verify the affected Once per 31 days for penetration flow path is isolation devices isolated.
outside containment AND Prior to entering MODE 4 from MODE 5 if not performed within the previous 92 days for isolation devices inside containment
8.1 Isolate
the affected 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> penetration flow path by use of at least one closed and de-activated automatic valve, closed manual valve, or blind flange. 3.6.3-2 Amendment No.
- ACTIONS CONDITION C. --------------NOTE-------------
Only applicable to penetration flow paths with only one containment isolation valve and a closed system. -----------------------------------
One or more penetration flow paths with one containment isolation valve inoperable.
- ' D. One or more purge exhaust or air room supply valves not locked closed. E. Required Action and associated Completion Time not met.
- Palisades l\luclear Plant Containment Isolation Valves 3.6.3 REQUIRED ACTION COMPLETION TIME C. 1 Isolate the affected 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> penetration flow path by use of at least one closed and de-activated automatic valve, closed manual valve, or blind flange. AND -------------------1\!0TE-----------------
Isolation devices in high radiation areas may be verified by use of administrative means. ---------------------------------------------
C.2 Verify the affected Once per 31 days penetration flow path is isolated . D.1 Lock closed the affected 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> valves. E.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Al\ID E.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> 3.6.3-3 Amendment
!\lo.
Containment Isolation Valves 3.6.3
- SURVEILLANCE REQUIREMENTS
- SR 3.6.3.1 SR *3.6.3.2 SURVEILLANCE Verify each 8 inch purge valve and 12 inch air room supply valve is locked closed.
Valves and blind flanges in high radiation areas may be verified by use of administrative means. ------------------------------------------------------------------
FREQUENCY 31 days Verify each manual containment isolation valve 31 days SR 3.6.3.3 and blind flange that is located outside containment and not locked, sealed, or otherwise secured in position, and is required to be closed during accident conditions, is closed, except for
- containment isolation valves that are open under administrative controls . ----------------------------N()TE-----------------------------
Valves and blind flanges in high radiation areas may be verified by use of administrative means. Verify each manual containment isolation valve arid blind flange that is located inside containment and not locked, sealed, or otherwise secured in position, and required to be closed during accident conditions, is closed, except for containment isolation valves that are open under administrative controls . Palisades Nuclear Plant 3.6.3-4 Prior to entering MODE 4from MODE 5 if not performed within the previous 92 days Amendment No.
- *
- Containment Isolation Valves 3.6.3 SURVEILLANCE REQUIREMENTS SR 3.6.3.4 SR 3.6.3.5 SR 3.6.3.6 SURVEILLANCE
- Verify the isolation time of each automatic power operated containment isolation valve is within limits. FREQUENCY In accordance with -the lnservice Testing Program Verify each containment 8 inch purge exhaust and 184 days 12 inch air room supply valve is closed by performance of a leakage rate test. Verify each automatic containment isolation valve 18 months that is not locked, sealed, o*r otherwise secured in position, actuates to the isolation position on an actual or simulated actuation signal. Palisades Nuclear Plant 3.6.3-5 Amendment No.
- 3.6 CONTAINMENT SYSTEMS 3.6.4 Containment Pressure Containment Pressure 3.6.4 LCO 3.6.4 Containment pressure shall be :s: 1.0 psig in MODES 1 and 2 and :s: 1.5 psig in MODES 3 and 4. APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION A. Containment pressure not A.1 within limit. B. Required Action and . B.1 associated Completion Time not met. AND /-B.2 , SURVEILLANCE REQUIREMENTS
/ REQUIRED ACTION Restore containment pressure to within limit. Be in MODE 3. Be in MODE 5. SURVEILLANCE SR 3.6.4.1 Verify containment pressure is within limit. Palisades Nuclear Plant 3.6.4-1 COMPLETION TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> 6 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No.
Containment Air Temperature 3.6.5
- 3.6 CONTAINMENT SYSTEMS 3.6.5 Containment Air Temperature
- LCO 3.6.5 Containment average air temperature shall 140°F. APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A. Containment average air A.1 Restore containment temperature not within average air temperature limit. to within limit. B . Required Action and B.1 Be in MODE 3. associated Completion Time not met. AND B.2 Be in MODE 5. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.6.5.1 Verify containment average air temperature is within limit. Palisades Nuclear Plant 3.6.5-1 COMPLETION TIME 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> 6 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> FREQUENCY 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Amendment No.
- 3.6 CONTAINMENT SYSTEMS 3.6.6 *Containment Cooling Systems Containment Cooling Systems 3.6.6 LCO 3.6.6 Two containment cooling trains shall be OPERABLE.
- APPLICABILITY:
MODES 1, 2, and 3. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more containment A.1 Restore train(s) to 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> cooling trains inoperable.
OPERABLE status. AND At least 1 00% of the required post accident ** containment cooling capability available.
B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND B.2 Be in MODE 4. 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />
- Palisades Nuclear Plant 3.6.6-1 Amendment No.
Containment Cooling Systems 3.6.6
- SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.6.6.1 Verify each containment spray manual, power 31 days operated, and automatic valve in the flow path that is not locked, sealed, or otherwise secured in position is in the correct position.
SR 3.6.6.2 Operate each Containment Air Cooler Fan Unit for 31 days 15 minutes. I \ SR 3.6.6.3 Verify the containment spray piping is full of water 31 days to the 735 ft elevation in the containment spray header .
- SR 3.6.6.4 Verify total service water flow rate, when aligned 18 months --for accident conditions, is 4800 gpm to Containment Air Coolers VHX-1, VHX-2, and VHX-3. SR 3.6.6.5 Verify each containment spray pump's developed In accordance with head at the flow test point is greater than or equal the lnservice Testing to the required developed head. , Program I ( SR 3.6.6.6 Verify each automatic containment spray valve in 18 months the flow path that is not locked, sealed, or otherwise secured in position, actuates to its correct position on an actual or simulated actuation signal.
- Palisades Nuclear Plant 3.6.6-2 Amendment No.
- *
- Containment Cooling Systems 3.6.6 SURVEILLANCE REQUIREMENTS SR 3.6.6.7 SR 3.6.6.8 SR 3.6.6.9 SURVEILLANCE Verify each containment spray pump starts automatically on an actual or simulated actuation signal. Verify each containment cooling fan starts automatically on an actual or simulated actuation signal.
- Verify each spray nozzle is unobstructed.
Palisades Nuclear Plant 3.6.6-3 FREQUENCY 18 months 18 months 10 years Amendment No. , .\.'
- 3.6 CONTAINMENT SYSTEMS 3.6.7 Hydrogen Recombiners LCO 3.6.7 Two hydrogen recombiners shall be OPERABLE.
APPLICABILITY:
MODES 1 and 2. ACTIONS CONDITION REQUIRED ACTION A. One hydrogen recombiner
NOTE------------------
LCO 3.0.4 is not applicable.
A.1 Restore hydrogen recombiner to
- OPERABLE status . B. Required Action and B.1 Be in MODE 3. associated Completion Time not met.
- Palisades Nuclear Plant 3.6.7-1 Hydrogen Recombiners
3.6.7 COMPLETION
TIME 30 days 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Amendment No.
- SURVEILLANCE REQUIREMENTS
- SR 3.6.7.1 SR 3.6.7.2 SR 3.6.7.3 SURVEILLANCE Perform a system functional test for each hydrogen recombiner.
Visually examine each hydrogen recombiner enclosure and verify there is no evidence of abnormal conditions.
Perform continuity and a resistance to ground test for each heater phase . Palisades Nuclear Plant 3.6.7-2 Hydrogen Recombiners
3.6.7 FREQUENCY
18 months 18 months 18 months Amendment No.
- 3. 7 PLANT SYSTEMS 3.7.1 Main Steam Safety Valves (MSSVs) MSSVs 3.7.1 LCO 3.7.1 Twenty-three MSSVs shall be OPERABLE as specified in Table 3.7.1-1. *
- APPLICABILITY:
MODES 1, 2, and 3. ACTIONS CONDITION REQUIRED ACTION A. One or more required A.1 ' Restore required MSSVs inoperable.
MSSVs to OPERABLE status . B. Required Action and B.1 Be in MODE 3. associated Completion . Time not met. AND B.2 Be in MODE4. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.7 .. 1.1 Verify each required MSSV lift setting is within the limits of Table 3.7.1-1 in accordance with the lnservice Testing Program. Following testing, lift settings shall be within +/- 1 % . *Palisades Nuclear Plant 3.7.1-1 COMPLETION TIME 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> 6 hours 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> . FREQUENCY . In accordance with the lnservice Testing Program Amendment No.
- *
- Table 3.7.1-1(page1of1)
MSSVs 3.7.1 Main Steam Safety Valve Lift Settings VALVE NUMBER LIFT SETTIN G Steam Generator A Steam Generator B (psig +/- 3%) RV-0703 RV-0701 RV-0704 RV-0702 1025 RV-0705 RV-0707 RV-0706 RV-0708 RV-0713 RV-0709 RV-0714 RV-0710 1005 RV-0715 RV-0711 RV-0716 RV-0712 RV-0717 RV-0719 RV-0718 RV-0720 985 RV-0723 RV-0721 RV-0724 RV-0722 Palisades Nuclear Plant 3.7.1-2 Am endment No.
- **
- 3. 7 PLANT SYSTEMS 3.7.2 Main Steam Isolation Valves (MSIVs) LCO 3.7.2 . Two MSIVs shall be OPERABLE.
APPLICABILITY:
MODE 1, MS IVs 3.7.2 MODES 2 and 3 except when both MSIVs are closed and de-activated.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One MSIV inoperable in A.1 Restore MSIV to 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> MODE 1. OPERABLE status. B. Required Action and B.1 Be in MODE 2. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> Associated Completion Time of Condition A not met. C. --------------NOTE-------------
C.1 Close MSIV. 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> Separate Condition entry is allowed for each MSIV. AND -----------------------------------
One or more MSIVs C.2 Verify MSIV is closed. Once per 7 days inoperable in MODE 2 or 3. D. Required Action and D.1 Be in MODE 3. . 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time of Condition C not AND met. D.2 Be in MODE 4. 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> Palisades Nuclear Plant 3.7.2-1 Amendment No.
- SURVEILLANCE REQUIREMENTS
- SR 3.7.2.1 SURVEILLANCE Verify closure time of each MSIV is 5 seconds on an actual or simulated actuation signal from each train under no flow conditions . Palisades Nuclear Plant 3.7.2-2 MS IVs 3.7.2 FREQUENCY 18 months Amendment No.
- *
- Main Feedwater Regulating Valves (MFRVs) and MFRV Bypass Valves LCO 3.7.3 Two MFRVs and two MFRV bypass valves shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, and 3 except when both MFRVs and both MFRV bypass valves are either closed and de-activated, or isolated by closed manually actuated valves. ACTIONS ------------------------------------------------------------NOTE:---------------------------------------------------------
Separate Condition entry is allowed for each valve. CONDITION REQUIRED ACTION COMPLETION TIME A. One or more MFRVs or A.1 Close or isolate 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> MFRV bypass valves inoperable MFRV(s) or inoperable.
MFRV bypass valve(s).
AND A.2 Verify inoperable Once per 7 days MFRV(s) or MFRV bypass valve(s) is closed or isolated.
B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND B.2 Be in MODE 4. 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> Palisades Nuclear Plant 3. 7.3-1 Amendment No.
- *
- MFRVs and MFRV Bypass Valves 3.7.3 SURVEILLANCE REQUIREMENTS SR 3.7.3.1 SURVEILLANCE Verify the closure time of each MFRV and MFRV bypass valve is 22 seconds on a actual or simulated actuation signal. Palisades Nuclear Plant 3.7.3-2 FREQUENCY 18 months Amendment No.
AD Vs 3.7.4
- 3.7 PLANT SYSTEMS 3.7.4 Atmospheric Dump Valves (ADVs) LCO 3.7.4 One ADV per steam generator shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, and 3, MODE 4 when steam generator is being relied upon for heat removal. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One required ADV -------------------1\!0TE-----------------
LCO 3.0.4 is not applicable.
A.1 Hestore ADV to 7 days OPERABLE status .
- B. Two required ADVs B.1 Restore one ADV to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> inoperable.
OPERABLE status. C. Required Action and C. 1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met.
- AND C.2 Be in MODE 4 without 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> reliance upon steam generator for heat removal.
- Palisades Nuclear Plant 3.7.4-1 Amendment No.
- SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.7.4.1 Verify one complete cycle of each ADV. *
- Palisades Nuclear Plant 3.7.4-2 AD Vs 3.7.4 FREQUENCY 18 months Amendment No.
AFW System 3.7.5 .
- 3. 7 PLANT SYSTEMS *
- 3.7.5 Auxiliary Feedwater (AFW) System LCO 3.7.5 APPLICABILITY:
ACTl()NS Two AFW trains shall be OPERABLE.
- 1. Only one AFW train, which includes a motor driven pump, is required to be OPERABLE in M()DE 4. 2. . The turbine driven AFW pump is only required to be ()PERABLE in MODES 1 and 2. 3. Two AFW pumps may* be placed in manual for testing, for a period of up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />. M()DES 1, 2, and 3, M()DE 4 when steam generator is relied upon for heat removal. C()NDITl()N REQUIRED ACTION C()MPLETl()N TIME A. ()ne steam supply to A. 1 turbine driven AFW pump inoperable in M()DE 1 or 2. Palisades Nuclear Plant Restore steam supply to 7 days OPERABLE status. 3.7.5-1 10 days from discovery of failure to meet the LC() Amendment No.
- ACTIONS CONDITION B. One or more AFW trains inoperable for reasons other than Condition A in MODE 1,-2, or 3. AND At least 100% of required AFW fl.ow available to both steam generators.
AND At least two AFW pumps OPERABLE.
- C . Required Action and associated Completion Time of Condition A or B not met. OR One or more AFW trains inoperable with at least 100% of the required AFW flow available to only one steam generator in MODE 1, 2, or 3. OR_ Only one AFW pump OPERABLE in MODE 1, 2, or 3 .
- Palisades Nuclear Plant REQUIRED ACTION B.1 Restore train(s) to OPERABLE status. C.1 Be in MODE 3. AND C.2 Be in MODE 4. 3.7.5-2 AFW System 3.7.5 COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> AND 10 days from discovery of failure to meet the LCO 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 30 hours Amendment No. I
- *
- ACTIONS CONDITION D. Two AFW trains inoperable with less than 100% of the required AFW flow. available to each steam generator, in MODE 1, 2, or 3. Required AFW train inoperable in MODE 4. REQUIRED ACTION ------------------NOTE------------------
LCO 3.0.3 and all other LCO Required Actions requiring MODE changes or power reductions are suspended until at least 100% of the required AFW flow is available to at least one steam generator.
D.1 Initiate action to restore one AFW train to AFW System 3.7.5 COMPLETION TIME OPERABLE status. Immediately SURVEILLANCE REQUIREMENTS SR 3.7.5.1 SR 3.7.5.2 SURVEILLANCE Verify each required AFW manual, power operated, and automatic valve in each water flow path and in both steam supply flow paths to the steam turbine driven pump, that is not locked, sealed, or otherwise secured in position, is in the correct position:
Verify the developed head of each required AFW pump at the flow test point is greater than or equal to the required developed head . Palisades Nuclear Plant 3.7.5-3 FREQUENCY 31 days In accordance with the lnservice Testing Program Amendment No.
- * ,. SURVEILLANCE REQUIREMENTS SR 3.7.5.3 SR 3.7.5.4 SURVEILLANCE Only required to be met in M()DES 1, 2 or 3 when AFW is not in operation.
Verify each AFW automatic valve that is not locked, sealed, or otherwise secured in position, actuates to the correct position on an actual or simulated actuation signal. * ------------------------------N()TE----------------------------
Only required to be met in M()DES 1, 2, and 3. Verify each required AFW pump starts
- automatically on an actual or simulated actuation signal. Palisades Nuclear Plant 3.7.5-4 AFW System 3.7.5 FREQUENCY 18 months 18 months Amendment No.
Condensate Storage and Supply 3.7.6
- 3. 7 PLANT SYSTEMS *
- 3. 7.6 Condensate Storage and Supply LCO 3.7.6 The combined useable volume of the Condensate Storage Tank (CST) and Primary Makeup Storage Tank (T-81) shall be 100,000 gallons. APPLICABILITY:
MODES 1, 2, and 3, MODE 4 when steam generator is relied upon for heat removal. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Condensate volume not A.1 Verify OPERABILITY of 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> within limit. backup water supplies.
AND Once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter AND A.2 Restore condensate 7 days volume to within limit. B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time not met. AND B.2 Be in MODE 4 without 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> reliance on steam generator for heat removal. Palisades Nuclear Plant 3.7.6-1 Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.7.6.1 Verify condensate useable volume is 100,000 gallons . Palisades Nuclear Plant 3.7.6-2 Condensate Storage and Supply 3.7.6 FREQUENCY 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No.
- 3. 7 PLANT SYSTEMS 3.7.7 Component Cooling Water (CCW) System LCO 3.7.7 Two CCW trains shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A. One or more CCW trains A.1 Restore train(s) to inoperable.
OPERABLE status. AND At least 1 00% of the
- required CCW post accident cooling capability available.
B. Required Action and B.1 Be in MODE 3. associated Completion Time not met. AND B.2 Be in MODE 5.
- Palisades Nuclear Plant 3.7.7-1 CCW System 3.7.7 COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 6 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Amendment No.
- SURVEILLANCE REQUIREMENTS SR 3.7.7.1 SR 3.7.7.2
- SR 3.7.7.3 SURVEILLANCE
l'J()TE----------------------------
1 solation of CCW flow to individual components does not render the CCW System inoperable.
Verify each CCW manual, power operated, and automatic valve in the flow path servicing safety related equipment, that is not locked, sealed, or otherwise secured in position, is in the correct position.
N()TE-----------------------------
()nly required to be met in M()OES 1, 2, and 3. Verify each CCW automatic valve in the flow path that is not locked, sealed, or otherwise secured in position, actuates to the correct position on an actual or simulated actuation signal. -----------------------------f\l()TE-----------------------------
Only required to be met in M()OES 1, 2, and 3. CCW System 3.7.7 FREQUENCY 31 days 18 months Verify each CCW pump starts automatically on an 18 months actual or simulated actuation signal in the "with standby power available" mode .
- Palisades f\luclear Plant 3.7.7-2 Amendment fl.lo.
- 3. 7 PLANT SYSTEMS 3.7.8 Service Water System (SWS) LCO 3.7.8 Two SWS trains shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A. One or more SWS trains A.1 Resto.re train(s) to inoperable.
OPERABLE status. AND At least 1 00% of the required SWS post
- accident cooling capability available.
B. Required Action and B.1 Be in MODE 3. associated Completion Time not met. AND B.2 Be in MODE 5.
- Palisades Nuclear Plant 3.7.8-1 sws 3.7.8 COMPLETION TIME 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> 6 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Amendment No.
- SURVEILLANCE REQUIREMENTS
- SR 3.7.8.1 SR 3.7.8.2 SR 3.7.8.3 SURVEILLANCE
N()TE-----------------------------
1 solation of SWS flow to individual components does not render SWS Verify each SWS manual, power operated, and automatic valve in the flow path servicing safety related equipment, that is not locked, sealed, or otherwise secured in position, is in the correct position.*
N()TE------------------------------
Only required to be met in M()DES 1, 2, and 3. Verify each SWS automatic valve in the flow path that is not locked, sealed, or otherwise secured in position, actuates to the correct position on an actual or simulated actuation signal. -----.------------------------N()TE--------------.:.--------------
Only required to be met in M()DES 1, 2, and 3. Verify each SWS pump starts automatically on an actual or simulated actuation signal in the "with standby power available" mode . Palisades Nuclear Plant 3.7.8-2 sws 3.7.8 FREQUENCY 31 days 18 months 18 months Amendment No.
- 3. 7 PLANT SYSTEMS *
- 3.7.9 Ultimate Heat Sink (UHS) LCO 3.7.9 The UHS shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A. UHS inoperable.
A.1 Be in MODE 3. AND A.2 Be in MODE 5 . SURVEILLANCE REQUIREMENTS SR 3.7.9.1 SR 3.7.9.2 SURVEILLANCE Verify water level of UHS is 568.25 ft above mean sea level. Verify water temperature of UHS is :.::; 81.5°F. Palisades Nuclear Plant 3.7.9-1 UHS 3.7.9 COMPLETION TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours FREQUENCY 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> 24 hours Amendment No.
- 3. 7 PLANT SYSTEMS 3. 7.1 O Control Room Ventilation (CRV) Filtration LCO 3. 7 .10 Two CRV Filtration trains shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, 4, During CORE AL TERA TIONS,
- During movement of irradiated fuel assemblies, CRV Filtration 3.7.10 During movement of a fuel cask in or over the Spent Fuel Pool (SFP). ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME . A. One CRV Filtration train A.1 Restore CRV Filtration
- ?days inoperable.
train to OPERABLE
- status . B. Required Action and B.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> associated Completion Time of Condition A not AND met in MODE 1, 2, 3, or 4. B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br />
- Palisades Nuclear Plant 3.7.10-1 Amendment No.
- ACTIONS CONDITION C. Required Action and associated Completion Time of Condition A not met during CORE AL TERA TIONS, during movement of irradiated fuel assemblies, or during movement of a fuel cask in or over the SFP.
- D. Two CRV Filtration trains inoperable during CORE AL TERA TIONS, during movement of irradiated fuel assemblies, or during movement of a fuel cask in or over the SFP. E. Two CRV Filtration trains inoperable in MODE 1, 2, 3, or4 .
- Palisades Nuclear Plant REQUIRED ACTION C. 1 Place OPERABLE CRV Filtration train in emergencx mode. OR C.2.1 Suspend CORE AL TERA TIONS. AND C.2.2 Suspend movement of irradiated fuel assemblies.
AND C.2.3 Suspend movement of a fuel cask in or over the SFP. D. 1 Suspend CORE ALTERATIONS.
AND D.3 Suspend movement of a fuel cask in or over the SFP. E.1 Enter LCO 3.0.3. 3.7.10-2 CRV Filtration 3.7.10 COMPLETION TIME Immediately Immediately Immediately Immediately Immediately Immediately Immediately Amendment No.
CRV Filtration 3.7.10
- SURVEILLANCE REQUIREMENTS
- SR 3.7.10.1 SR 3.7.10.2 SR 3.7.10.3 SR 3.7.10.4 SURVEILLANCE Operate each CRV Filtration train for :::: 1 O continuous hours with associated heater (VHX-26A or VHX-268) operating.
Perform required CRV Filtration filter testing in accordance with Ventilation Filter Testing Program. -----------------------------1\J()TE-----------------------------
Only required to be met in M()DES 1, 2, 3, and 4, and during movement of irradiated fuel assemblies in containment.
FREQUENCY 31 days In accordance with the Ventilation Filter Testing Program Verify each CRV Filtration train actuates on an 18 months actual or simulated actuation signal. Verify one CRV Filtration train can maintain a 18 months positive pressure of :::: 0.125 inches water gauge, relative to the adjacent area during the emergency mode of operation, at an emergency ventilation flow rate of:::: 3040 cfm and :s:: 3520 cfm . Palisades Nuclear Plant 3.7.10-3 Amendment No.
- *
- 3. 7 PLANT SYSTEMS 3.7.11 Control Room Ventilation (CRV) Cooling LCO 3. 7 .11 Two CRV Cooling trains shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, 4, During _CORE AL TERA TIONS, During movement of irradiated fuel assemblies, CRV Cooling 3.7.11 During movement of a fuel cask in or over the Spent Fuel Pool (SFP). ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME . A. One CRV Cooling train A.1 Restore CRV Cooling *30 days inoperable.
train to OPERABLE status . B. Required Action and B.1 Be in MODE 3. 6_hours associated Completion Time of Condition A not AND met in MODE 1, 2, 3, or 4. B.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> Palisades Nuclear Plant 3.7.11-1 Amendment No.
- ACTIONS CONDITION C. Required Action and associated Completion Time of Condition A not met during CORE AL TERA TIONS, during movement of irradiated fuel assemblies, or movement of a fuel cask in or over the SFP. ** D. Two CRV Cooling trains inoperable during CORE AL TERA TIONS, during movement of irradiated fuel assemblies, or movement of a fuel cask in or over the SFP.
OR I C.2.1 Suspend CORE AL TERA TIONS. AND C.2.2 Suspend movement of irradiated fuel assemblies.
AND I C.2.3 Suspend movement of a fuel cask in or over the SFP. D.1 Suspend CORE AL TERA TIONS. AND " D.2 Suspend movement of irradiated fuel assemblies.
AND D.3 Suspend movement of a fuel cask in or over the SFP . 3.7.11-2 CRV Cooling 3.7.11 COMPLETION TIME Immediately Immediately Immediately Immediately Immediately Immediately Immediately Amendment No.
- *
- ACTIONS CONDITION E. Two CRV Cooling trains inoperable in MODE 1, 2, 3, or4. SURVEILLANCE REQUIREMENTS REQUIRED ACTION E.1 Enter LCO 3.0.3. SURVEILLANCE CRV Cooling 3.7.11 COMPLETION TIME Immediately FREQUENCY SR 3.7.11.1 Verify each CRV Cooling train has the capability to 18 months remove the assumed heat load . Palisades Nuclear Plant 3.7.11-3 Amendment No.
- *
- Fuel Handling Area Ventilation System 3.7.12 3.7 PLANT SYSTEMS 3. 7.12 Fuel Handling Area Ventilation System LCO 3.7.12 The Fuel Handling Area Ventilation System shall be OPERABLE with one fuel handling area exhaust fan aligned to the emergency filter bank and in operation.
APPLICABILITY:
During movement of irradiated fuel assemblies in the fuel handling building when irradiated fuel assemblies with < 30 days decay time are in the fuel handling building, During movement of a fuel cask in or over the SFP when irradiated fuel assemblies with < 90 days decay time are in the fuel handling building, During CORE AL TERA TIONS when irradiated fuel assemblies with < 30 days decay time are in the containment with the equipment hatch open, During movement of irradiated fuel assemblies in the containment when irradiated fuel assemblies with < 30 days decay time are in the containment with the equipment hatch open. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Fuel Handling Area A.1 Suspend movement of Immediately Ventilation System not fuel assemblies.
aligned or in operation.
AND OR A.2 Suspend CORE Immediately Fuel Handling Area AL TERA TIONS. Ventilation System inoperable.
AND A.3 Suspend movement of Immediately a fuel cask in or over the SFP . Palisades Nuclear Plant 3.7.12-1 Amendment No.
Fuel Handling Area Ventilation System 3.7.12
- SURVEILLANCE REQUIREMENTS
- SR 3.7.12.1 SR 3.7.12.2 SURVEILLANCE Perform required Fuel Handling Area Ventilation
- System filter testing in accordance with the Ventilation Filter Testing Program. Verify the flow rate of the Fuel Handling Area Ventilation System, when aligned to the emergency filter bank, is 5840 cfm and 8760 cfm . Palisades Nuclear Plant 3.7.12-2 FREQUENCY In accordance with the Ventilation Filter Testing Program 18 months Amendment No.
- 3. 7 PLANT SYSTEMS 3. 7.13 Engineered Safeguards Room Ventilation (ESRV) Dampers LCO 3.7.13 Two ESRV Damper trains shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION ESRV Dampers 3.7.13 COMPLETION TIME A. One or more ESRV A.1 Initiate action to isolate Immediately
- Damper trains inoperable.
associated ESRV Damper train(s) . SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.7.13.1 Verify each ESRV Damper train closes on an actual or simulated actuation signal. Palisades Nuclear Plant 3.7.13-1 FREQUENCY 31 days Amendment No.
SFP Water Level 3.7.14
- 3. 7 PLANT SYSTEMS *
- 3.7.14 Spent Fuel Pool (SFP) Water Level LCO 3.7.14 APPLICABILITY:
ACTIONS The SFP water level shall 647 ft elevation.
NOTE------------------------------------------
S FP level may be below the 647 ft elevation to support fuel cask movement, if the displacement of water by the fuel cask submerged in the SFP, would raise SFP level 647 ft elevation.
During movement of irradiated fuel assemblies in the SFP, During movement of a fuel cask in or over the SFP. ----------------------------------------------------------N()TE-----------------------------------------------------------
LCO 3.0.3 is not applicable . CONDITION A. SFP water level not within A.1 limit. A.2 SURVEILLANCE REQUIREMENTS REQUIRED ACTION Suspend movement of irradiated fuel assemblies in SFP. Suspend movement of fuel cask in or over the SFP. SURVEILLANCE SR 3.7.14.1 Verify the SFP water level is 647 ft elevation.
Palisades Nuclear Plant 3.7.14-1 COMPLETION TIME Immediately Immediately FREQUENCY 7 days Amendment No.
- 3. 7 PLANT SYSTEMS 3. 7.15 Spent Fuel Pool (SFP) Boron Concentration SFP Boron Concentration 3.7.15 LCO 3.7.15 The SFP boron concentration shall be 1720 ppm. APPLICABILITY:
When fuel assemblies are stored in the SFP and a verification of the stored assemblies has not been performed since the last movement of fuel assemblies in the SFP. ACTIONS ---------------------------------------------------------NOTE------------------------------------------------------------
LCO 3.0.3 is not applicable.
CONDITION REQUIRED ACTION COMPLETION TIME SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.15.1 Verify the SFP boron concentration is within limit. 7 days Palisades Nuclear Plant 3.7.15-1 Amendment No.
- *
- Spent Fuel Assembly Storage 3.7.16 3. 7 PLANT SYSTEMS 3.7.16 Spent Fuel Assembly Storage LCO 3.7.16 The combination of initial enrichment and burnup of each spent fuel assembly stored in Region II shall be within the requirements of Table 3.7.16-1.
APPLICABILITY:
Whenever any fuel assembly is stored in Region II of either the spent fuel pool or the north tilt pit. ACTIONS ------------------------------------------------------------1\JOTE---------------------------------------------------------
LCO 3.0.3 is not applicable.
CONDITION A. Requirements of the LCO A.1 not met. SURVEILLANCE REQUIREMENTS REQUIRED ACTION Initiate action to move the noncomplying fuel assembly from Region II. SURVEILLANCE SR 3.7.16.1 Verify by administrative means the initial enrichment and burnup of the fuel assembly is in accordance with Table 3.7.16-1 . Palisades Nuclear Plant 3.7.16-1 COMPLETION TIME Immediately FREQUENCY Prior to storing the fuel assembly in Region II Amendment No.
- *
- TABLE 3.7.16-1(page1of1)
Spent Fuel Burnup Requirements for Storage in Region II of Spent Fuel Assembly Storage 3.7.16 the Spent Fuel Pool and North Tilt Pit Initial Enrichment in Weight % of U 235 Discharge Burnup Gigawatt Days per Metric Ton 1.5 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.27 0 1.9 5.2 8.5 11.5 14.1 16.6 18.8 20.9 22.9 23.5 Linear interpolation between two consecutive points will yield conservative results . Palisades Nuclear Plant 3.7.16-2 Amendment No.
* ** 3. 7 PLANT SYSTEMS 3. 7.17 Secondary Specific Activity Secondary Specific Activity 3.7.17 LCO 3.7.17 The specific activity of the secondary coolant shall be 0.1 O µCi/gm DOSE EQUIVALENT 1-131. APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. Specific activity not within A.1 Be in MODE 3. 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> limit. A.2 Be in MODE 5. 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.7.17.1 Verify the specific activity of the secondary coolant is 31 days within limit. Palisades Nuclear Plant 3.7.17-1 Amendment No.
AC Sources -Operating 3.8.1
- 3.8 ELECTRICAL POWER SYSTEMS *
ACTIONS The following AC electrical sources shall be OPERABLE:
- a. Two qualified circuits between the offsite transmission network and the onsite Class 1 E AC Electrical Power Distribution System; and b. Two Diesel Generators (DGs) each capable of supplying one train of the onsite Class 1 E AC Electrical Power Distribution System.
- MODES 1, 2, 3, and 4. CONDITION REQUIRED ACTION COMPLETION TIME A. One offsite circuit inoperable.
Palisades Nuclear Plant A.1 Perform SR 3.8.1.1 (offsite source check) for OPERABLE offsite circuit. 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> Once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> thereafter A.2 Restore offsite circuit to 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> OPERABLE status. 3.8.1-1 10 days from discovery of failure to meet LCO Amendment No.
- ACTIONS CONDITION REQUIRED ACTION 8. One DG inoperable.
8.1 Perform
SR 3.8.1.1 ( offsite source check) for the OPERABLE offsite circuit(s).
AND 8.2 Declare required feature(s) supported by the inoperable DG inoperable when its redundant required feature(s) is inoperable.
AND 8.3.1 Determine OPERABLE
- DG is not inoperable due to common cause failure. OR B.3.2 Perform SR 3.8.1.2 (start test) for OPERABLE DG. AND B.4 Restore DG to OPERABLE status.
- Palisades Nuclear Plant 3.8.1-2 AC Sources -Operating
3.8.1 COMPLETION
TIME 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> AND Once per 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> thereafter 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> from discovery of Condition 8 concurrent with inoperability of redundant required feature(s) 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> 24 hours 7 days AND 10 days from discovery of failure to meet LCO Amendment No.
- ACTIONS CONDITION C. Two offsite circuits inoperable.
D. One offsite circuit inoperable.
- AND One DG inoperable.
E. Two DGs inoperable.
- Palisades Nuclear Plant REQUIRED ACTION C.1 Declare required feature(s) inoperable when its redundant required feature(s) is inoperable.
AND C.2 Restore one offsite circuit to OPERABLE status. ------------------NOTE------------------
Enter applicable Conditions and Required Actions of LCO 3.8.9, "Distribution Systems -Operating," when Condition D is entered with no AC power source to any train. ---------------------------------------------
D.1 Restore offsite circuit to OPERABLE status. OR D.2 Restore DG to OPERABLE status. E.1 Restore one DG to OPERABLE status. ' 3.8.1-3 AC Sources -Operating
3.8.1 COMPLETION
TIME 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> from discovery of Condition C concurrent with inoperability of redundant required feature(s) 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> 12 hours 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> ' 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> Amendment No.
- ACTIONS CONDITION REQUIRED ACTION F. Required Action and F.1 Be in MODE 3. Associated Completion Time of Condition A, B, C, AND D, or E not met. F.2 Be in MODE 5. G. Three or more AC sources G.1 Enter LCO 3.0.3. inoperable.
SURVEILLANCE REQUIREMENTS . SURVEILLANCE . SR .3.8.1.1 Verify correct breaker alig.nrrient and voltage for each offsite circuit. AC Sources -Operating
3.8.1 COMPLETION
TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours Immediately FREQUENCY 7 days SR Verify each DG starts from standby conditions and 31 days achieves:
- a. In 10 seconds, ready-to-load status; and b., Steady state 2280 V and Palisades Nuclear Plant 2520 V, and 59.5 Hz and 61.2 Hz. 3.8.1-4 Amendment No.
- * * ( SURVEILLANCE REQUIREMENTS SR 3.8.1.3 SURVEILLANCE
NOTES---------------------------
- 1. Momentary transients outside the load range do not invalidate this test. 2. This Surveillance shall be conducted on only one DG at a time. 3. This Surveillance shall be preceded by and immediately follow without shutdown a *successful performance of SR 3.8.1.2. Verify each DG is synchronized and loaded, and operates for 60 minutes: a. For 15 minutes loaded to greater than or equal to peak accident load; and b . For the remainder of the test at a load 2300 kW and 2500 kW. AC Sources -Operating
3.8.1 FREQUENCY
31 days SR 3.8.1.4 Verify each day tank 2500 gallons of 31 days fuel oil. SR 3.8.1.5 Verify each DG rejects a load greater than or 18 months equal to its associated single largest post-accident load, and: a. b. c. Palisades Nuclear Plant Following load rejection, the frequency is 68 Hz; Within 3 seconds following load rejection, the voltage is 2280 V and 2640 V; and Within 3 seconds following load rejection, the frequency 59.5 Hz and 61.5 Hz . 3.8.1-5 Amendment No.
- * ** SURVEILLANCE REQUIREMENTS SURVEILLANCE AC Sources -Operating
3.8.1 FREQUENCY
SR 3.8.1.6 Verify each DG, operating at a power factor 0.9, 18 months SR 3.8.1.7 does not trip, and voltage is maintained 4000 V during and following a load rejection of 2300 kW and 2500 kW.
This Surveillance shall not be performed in MODE 1, 2, 3, or 4. Verify on an actual or simulated loss of offsite power signal: a. De-energization of emergency buses; b. Load shedding from emergency buses; c. DG auto-starts from standby condition and: 1. energizes permanently connected loads in 1 O seconds, 2. energizes auto-connected shutdown loads through automatic load sequencer, 3. maintains steady state voltage 2280 V and 2520 V, 4. maintains steady state frequency 59.5 Hz and 61.2 Hz, and 5. supplies permanently connected loads 5 minutes . Palisades Nuclear Plant 3.8.1-6 18 months Amendment No. *
- *
- SURVEILLANCE REQUIREMENTS SR 3.8.1.8 SURVEILLANCE Momentary transients outside the load and power factor ranges do not invalidate this test. AC Sources -Operating
3.8.1 FREQUENCY
Verify each DG, operating at a power factor 0.9, 18 months SR 3.8.1.9 operates for 24 .hours:* a. For 100 minutes loaded its peak accident loading; and b. For the remaining hours of the test loaded 2300 kW and 2500 kW.
This Surveillance shall not be performed in
- MODE 1, 2, 3, or4 . Verify each DG: a. Synchronizes with offsite power source while supplying its associated 2400 V bus upon a simulated restoration of offsite power; b. Transfers loads to offsite power source; and c. Returns to ready-to-load operation . Palisades Nuclear Plant 3.8.1-7 18 months Amendment l'Jo.
- *
- SURVEILLANCE REQUIREMENTS SR 3.8.1.10 SURVEILLANCE
N()TE-----------------------------
This Surveillance shall not be performed in MODE 1, 2, 3, or4. AC Sources -Operating
3.8.1 FREQUENCY
Verify the time of each sequenced load is within 18 months SR 3.8.1.11 +/- 0.3 seconds of design timing for each automatic load sequencer.
This Surveillance shall not be performed in MODE 1, 2, 3, or4. Verify on an .actual or simulated loss of offsite power signal in conjunction with an actual or_. simulated.
safety injection signal: a. De-energization of emergency buses; bi Load shedding from emergency buses; c. DG auto-starts from standby condition and: 1.
- energizes permanently connected loads in 10 seconds, 2. energizes emergency loads through its automatic load sequencer, 3. achieves steady state voltage :::: 2280 V and 2520 V, 4. achieves steady state frequency
- 59.5 Hz and 61.2 Hz, and 5. supplies permanently connected loads for :::: 5 minutes . Palisades Nuclear Plant 3.8.1-8 18 months Amendment No.
- *
- AC Sources -Shutdown 3.8.2 3.8 ELECTRICAL POWER SYSTEMS 3.8.2 AC Sources -Shutdown LCO 3.8.2 APPLICABILITY:
ACTIONS The following AC electrical power sources shall be OPERABLE:
- a. One qualified circuit between the offsite transmission network and the onsite Class 1 E AC electrical power distribution subsystem(s) required by LCO 3.8.10, "Distribution Systems -Shutdown";
and b. One Diesel Generator (DG) capable of supplying one train of the onsite Class 1 E AC electrical power distribution subsystem(s) required by LCO 3.8.10. MODES 5 and 6, During movement of irradiated fuel assemblies.
CONDITION REQUIRED ACTION COMPLETION TIME A. The required offsite circuit inoperable.
Palisades Nuclear Plant -----------------NOTE-------------------
Enter applicable Conditions and Required Actions of LCO 3.8.10, with one required train de-energized as a result of Condition A. A.1 Declare affected Immediately required feature(s) with A.2.1 no offsite power available inoperable.
Suspend CORE AL TERA TIONS. 3.8.2-1 Immediately (continued)
Amendment No.
- ACTIONS CONDITION A. (continued)
- B. The required DG inoperable.
- Palisades Nuclear Plant REQUIRED ACTION A.2.2 Suspend movement of irradiated fuel assemblies.
AND A.2.3 Initiate action to suspend operations involving positive reactivity additions.
AND A.2.4 Initiate action to restore required offsite power circuit to OPERABLE status . B.1 Suspend CORE ALTERATIONS.
AND B.2 Suspend movement of irradiated fuel assemblies.
AND B.3 Initiate action to suspend operations involving positive reactivity additions.
AND B.4 Initiate action to restore required DG to OPERABLE status . 3.8.2-2 AC Sources -Shutdown 3.8.2 COMPLETION TIME Immediately Immediately Immediately Immediately Immediately Immediately Immediately Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.8.2.1 SURVEILLANCE For AC sources required to be OPERABLE, the following SRs of Specification 3.8.1, "AC Sources -Operating" are applicable:
SR 3.8.1.1 SR 3.8.1.2 SR 3.8.1.4 . Palisades Nuclear Plant 3.8.2-3 AC Sources -Shutdown 3.8.2 FREQUENCY In accordance with applicable SRs Amendment No.
Diesel Fuel, Lube Oil, and Starting Air 3.8.3
- 3.8 ELECTRICAL POWER SYSTEMS *
- 3.8.3 Diesel Fuel, Lube Oil, and Starting Air LCO 3.8.3 For each Diesel Generator (DG): a. The stored diesel fuel oil, lube oil, and starting air subsystem shall be within limits, and b. Both diesel fuel oil transfer systems shall be OPERABLE.
APPLICABILITY:
When associated DG is required to be OPERABLE.
ACTIONS ----------------------------------------------------------NOTE-----------------------------------------------------------
Separate Condition entry is allowed for each DG . .. CONDITION REQUIRED ACTION COMPLETION TIME A. Fuel oil inventory A.1 Restore fuel oil 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> < 23, 700 gallons and inventory to within limits. > 20, 11 O gallons in storage tank. B. Stored lube oil inventory B.1 . Restore stored lube oil 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> < 200 gallons and inventory to within limits. > 160 gallons. I C. Fuel transfer system C. 1 Restore fuel transfer 15 hours1.736111e-4 days <br />0.00417 hours <br />2.480159e-5 weeks <br />5.7075e-6 months <br /> (P-18A) inoperable.
system to OPERABLE status . Palisades Nuclear Plant 3.8.3-1 Amendment No. ' I J
- ACTIONS CONDITION D. Fuel transfer system (P-18B) inoperable.
I E. Both fuel transfer systems inoperable.
F. Fuel oil properties other than viscosity, and water and sediment, not within limits .
- G. Required Action and associated . Time not met. OR Stored diesel fuel oil, lube oil, or starting air subsystem not within limits for reasons other than Condition A, B, or F .
- Palisades Nuclear Plant D. 1 E .. 1 F.1 G.1 Diesel Fuel, Lube Oil, and Starting Air 3.8.3 REQUIRED ACTION COMPLETION TIME Restore fuel transfer 7 days system to OPERABLE status. Restore one fuel 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> transfer system to OPERABLE status. : Restore stored fuel oil 30 days properties to within limits. Declare associated Immediately DG(s) inoperable.
3.8.3-2 Amendment.
No.
- *
- Diesel Fuel, Lube Oil, and Starting Air 3.8.3 SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.8.3.1 Verify the fuel oil storage tank contains 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> ;:: 23, 700 gallons of fuel. SR 3.8.3.2 Verify stored lube oil inventory is ;:: 200 gallons. 31 days SR 3.8.3.3 Verify fuel oil properties of new and stored fuel oil are In accordance tested in accordance with, and maintained within the with the Fuel Oil limits of, the Fuel Oil Testing Program. Testing Program SR 3.8.3.4 Verify each DG air start receiver pressure is 31 days ;:: 200 psig . SR *3.8.3.5 Check for and remove excess accumulated water from 92 days the fuel oil storage tank. SR 3.8.3.6 Verify the fuel oil transfer system operates to transfer 92 days fuel oil from the fuel oil storage tank to each DG day tank and engine mounted tank . Palisades Nuclear Plant 3.8.3-3 Amendment No.
- / *
- 3.8 ELECTRICAL POWER SYSTEMS 3.8.4 DC Sources -Operating DC Sources -Operating 3.8.4 LCO 3.8.4 The Left Train and Right Train DC electrical power sources shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS I -CONDITION REQUIRED ACTION COMPLETION TIME. A. One required DC electrical A.1 Verify* functional 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> power battery cross-connected battery charger inoperable.
charger is connected supplying power to the affected DC train. AND \ I A.2 Restore required DC 7 days electrical power source battery charger to OPERABLE status. B. One required DC electrical B.1 Verify OPERABLE 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> power source battery directly connected and inoperable.
functional cross-connected battery chargers are connected supplying power to the affected DC train. AND B.2 Restore required DC 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> electrical power source battery to OPERABLE status . Palisades Nuclear Plant 3:8.4-1 Amendment No.
- *
- ACTIONS CONDITION C. Required Action and associated Completion Time not met. SURVEILLANCE REQUIREMENTS REQUIRED ACTION C.1 Be in MODE 3. C.2 Be in MODE 5. SURVEILLANCE SR 3.8.4.1 Verify battery terminal voltage is 125 V on float charge . DC Sources -Operating
3.8.4 COMPLETION
TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours FREQUENCY 7 days SR 3.8.4.2 Verify no visible corrosion at battery terminals and 92 days SR 3.8.4.3 connectors.
Verify battery connection resistance is 50 µohm for inter-cell connections, 360 µohm for inter-rack connections, and 360 µohm for inter-tier connections.
Inspect battery cells, cell plates, and racks for visual indication of physical damage or abnormal deterioration that could degrade battery performance . Palisades Nuclear Plant 3.8.4-2 12 months Amendment No.
- DC Sources -Operating
3.8.4 SURVEILLANCE
REQUIREMENTS SR 3.8.4.4 SR 3.8.4.5 SR 3.8.4.6 SR 3.8.4.7 SURVEILLANCE FREQUENCY Remove visible terminal corrosion and verify 12 months battery cell to cell and terminal connections are coated with anti-corrosion material.
Verify battery connection resistance is 12 months 50 µohm for inter-cell connections, 360 µohm for inter-rack connections, and 360 µohm for inter-tier connections.
Verify each required battery charger supplies 18 months :<: 180 amps at :<: 125 V for :<: 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> . -----------------------------NOTES---------------------------
- 1. The modified performance discharge test in SR 3.8.4.8 may be performed in lieu of the service test in SR 3.8.4.7. 2. This Surveillance shall not be performed in MODE 1, 2, 3, or4. Verify battery capacity is adequate to supply, and maintain in OPERABLE status, the required emergency loads for the design duty cycle when subjected to a battery service test. 18 months Palisades Nuclear Plant 3.8.4-3 Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.8.4.8 SURVEILLANCE
NOTE---------------------------
Th is 3urveillance shall not be performed in MODE 1, 2, 3, or4. Verify battery capacity is 80% of the manufacturer's rating when subjected to a performance discharge test or a modified performance discharge test. Palisades Nuclear Plant 3.8.4-4 DC Sources -Operating
3.8.4 FREQUENCY
60 months 12 months when battery shows degradation or has reached 85% of the expected life with capacity < 100% of manufacturer's rating 24 months when battery has reached 85% of the expected life with capacity 100% of manufacturer's rating Amendment No.
DC Sources -Shutdown 3.8.5
- 3.8 ELECTRICAL POWER SYSTEMS 3.8.5 DC Sources -Shutdown * *
- LCO 3.8.5 DC electrical power source(s) shall be OPERABLE to support the DC electrical power distribution subsystem(s) required by LCO 3.8.10, "Distribution Systems -Shutdown." APPLICABILITY:
MODES 5 and 6, During movement of irrad.iated fuel assemblies.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more required DC A.1 Declare affected Immediately electrical power sources required feature(s) inoperable . inoperable.
OR A.2.1 Suspend CORE Immediately AL TERA TIONS. AND A.2.2 Suspend movement of Immediately irradiated fuel assemblies.
AND A.2.3 Initiate action to Immediately suspend operations involving positive reactivity additions.
AND (continued)
Palisades Nuclear Plant 3.8.5-1 Amendment No.
- **
- ACTIONS CONDITION REQUIRED ACTION DC Sources -Shutdown 3.8.5 COMPLETION TIME A. (continued)
A.2.4 Initiate action to restore Immediately required DC electrical power source(s) to OPERABLE status. SURVEILLANCE REQUIREMENTS SR 3.8.5.1 SURVEILLANCE For DC sources required to be OPERABLE, the following SRs are applicable:
SR 3.8.4.1 SR 3.8.4.2 SR 3.8.4.3 SR 3.8.4.4 SR 3.8.4.5 SR 3.8.4.6 . Palisades Nuclear Plant 3.8.5-2 FREQUENCY
- 1n accordance with applicable SRs Amendment No.
- *
- 3.8 ELECTRICAL POWER SYSTEMS
- 3.8.6 Battery Cell Parameters Battery Cell Parameters 3.8.6 LC0*3.8.6 Battery cell parameters for the Left Train and Right Train batteries shall be within limits. APPLICABILITY:
When associated DC electrical p*ower source(s) are required to be OPERABLE.
ACTIONS Separate Condition entry is allowed for each battery. C()NDITl()N REQU_IRED ACTION COMPLETl()N TIME A. ()ne or more batteries with A.1 Verify pilot cells 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> one or more battery cell electrolyte level and float parameters not within voltage meet Category A or B limits. Table 3.8.6-1 Category C limits. AND A.2 Verify battery cell 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> parameters meet Table 3.8.6-1 AND Category C limits. ()nee per 7 days thereafter AND A.3 Restore battery cell 31 days parameters to Category A and B limits of Table 3.8.6-1 . Palisades Nuclear Plant 3.8.6-1 Amendment No.
- *
- ACTIONS CONDITION B. Required Action and associated Completion Time of Condition A not met. OR One or more batteries with average electrolyte temperature of the representative cells < 70°F. OR One or more batteries with one or more battery cell parameters not within Category C limits . 8.1 REQUIRED ACTION Declare associated battery inoperable.
SURVEILLANCE REQUIREMENTS SR 3.8.6.1 SR 3.8.6.2 SR 3.8.6.3 SURVEILLANCE Verify battery cell parameters meet Table 3.8.6-1 Category A limits. Verify average electrolyte temperature of representative cells is ?0°F. Verify battery cell parameters meet Table 3.8.6-1 Category B limits . Palisades Nuclear Plant 3.8.6-2 Battery Cell Parameters
3.8.6 COMPLETION
TIME Immediately FREQUENCY 31 days 31 days 92 days Amendment No.
- *
- PARAMETER Electrolyte Level Float Voltage Specific Gravity(b)(c)
Table 3.8.6-1 (page 1 of 1) Battery Surveillance Requirements CATEGORY A: CATEGORY B: NORMAL LIMITS NORMAL LIMITS FOR EACH FOR EACH DESIGNATED CONNECTED PILOT CELL CELL > Minimum level > Minimum level indication mark, and indication mark, and 'Y4 inch above Y.a inch above maximum level maximum level indication mark(a) indication mark(a) 2.13 v 2.13 v 1.205 1.200 AND Average of connected cells 1.205 Battery Cell Parameters . 3.8.6 CATEGORYC:
ALLOWABLE LIMITS FOR EACH CONNECTED CELL Above top of plates, and not overflowing
> 2.07 v Not more than 0.020 below average connected cells AND Average of all connected cells 1.195 (a) It is acceptable for the electrolyte level to temporarily increase above the specified maximum during equalizing charges provided it is not overflowing. (b) Corrected for electrolyte temperature and level. Level correction is not required, however, when battery charging is < 2 amps when on float charge. (c) A battery charging current of< 2 amps when on float charge is acceptable for meeting specific gravity limits . Palisades Nuclear Plant 3.8.6-3 Amendment No.
- *
- 3.8 ELECTRICAL POWER SYSTEMS 3.8.7 Inverters
-Operating LCO 3.8.7 Four invert.ers shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4. ACTIONS CONDITION REQUIRED ACTION A One inverter inoperable.
NOTE------------------
Enter applicable Conditions and Required Actions of LCO 3.8.9, "Distribution Systems -Operating" with any Preferred AC bus de-energized.
A.1 Restore inverter to OPERABLE status. B. Required Action and B.1 Be in MODE 3. associated Completion Time not met. AND B.2 Be in MODE 5. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.8.7.1 Verify correctinverter voltage, frequency, and alignment to Preferred AC buses . Palisades Nuclear Plant 3.8.7-1 Inverters
-Operating
3.8.7 COMPLETION
TIME 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> 6 hours 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br /> FREQUENCY 7 days Amendment No.
- 3.8 ELECTRICAL POWER SYSTEMS 3.8.8 Inverters
-Shutdown Inverters
-Shutdown 3.8.8 LCO *3.8.8 lnverter(s) shall be OPERABLE to support the onsite Class 1 E Preferred AC bus electrical power distribution subsystem(s) required by LCO 3.8.10, "Distribution Systems -Shutdown." APPLICABILITY:
MODES 5 and 6, During movement of irradiated fuel assemblies.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more required A.1 Declare affected Immediately inverters inoperable.
required feature(s) inoperable.
OR A.2.1 Suspend CORE Immediately
- AL TERA TIONS. AND A.2.2 Suspend movement of Immediately irradiated fuel assemblies.
AND A.2.3 Initiate action to Immediately suspend operations involving positive reactivity additions.
AND A.2.4 Initiate action to restore Immediately required inverters to OPERABLE status .
- Palisades Nuclear Plant 3.8.8-1 Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.8.8.1 SURVEILLANCE Verify correct inverter voltage, frequency, and alignment to required Preferred AC buses . Palisades Nuclear Plant 3.8.8-2 Inverters
-Shutdown 3.8.8 FREQUENCY 7 days Amendment No.
- *
- 3.8 ELECTRICAL POWER SYSTEMS 3. 8. 9 Distribution Systems -Operating Distribution Systems -Operating 3.8.9 LCO 3.8.9 Left Train and Right Train AC, DC, and Preferred AC bus electrical power distribution subsystems shall be OPERABLE.
APPLICABILITY:
MODES 1, 2, 3, and 4.
CONDITION REQUIRED ACTION COMPLETION TIME A. One or more AC electrical A.1 Restore AC eleCtrical 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> power distribution power distribution subsystems in one train subsystem(s) to AND inoperable.
OPERABLE status. 16 hours1.851852e-4 days <br />0.00444 hours <br />2.645503e-5 weeks <br />6.088e-6 months <br /> from discovery of failure to* meet LCO B. One Preferred AC bus B.1 Restore Preferred AC 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> inoperable.
bus to status. AND I 16 hours1.851852e-4 days <br />0.00444 hours <br />2.645503e-5 weeks <br />6.088e-6 months <br /> from discovery of failure to meet LCO C. One or more DC electrical C.1 Restore DC electrical 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> power distribution power distribution subsystems in one train subsystem(s) to AND inoperable.
OPERABLE status. 16 hours1.851852e-4 days <br />0.00444 hours <br />2.645503e-5 weeks <br />6.088e-6 months <br /> from discovery of failure to meet LCO Palisades Nuclear Plant 3.8.9-1 Amendment No.
- *
- Distribution Systems -Operating
3.8.9 ACTIONS
CONDITION REQUIRED ACTION D. Required Action and D.1 Be in MODE 3. associated Completion Time not met. AND D.2 Be in MODE 5. E. Two or more inoperable E.1 Enter LCO 3.0.3. distribution subsystems that result in a loss of function.
SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.8.9.1 Verify correct breaker alignments and voltage to required AC, DC, and Preferred AC bus electrical power distribution subsystems . Palisades Nuclear Plant 3.8.9-2 COMPLETION TIME 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> 36 hours Immediately FREQUENCY 7 days Amendment No.
Distribution Systems -Shutdown 3.8.10
- 3.8 ELECTRICAL POWER SYSTEMS *
- 3.8.1 O Distribution Systems -Shutdown LCO 3.8.10 The necessary portion of AC, DC, and Preferred AC bus electrical power distribution subsystems shall be OPERABLE to support equipment required to be OPERABLE.
APPLICABILITY:
MODES 5 and 6, . During movement of irradiated fuel assemblies.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One or more required AC, A.1 Declare associated Immediately DC, or Preferred AC bus supported required electrical power distribution feature(s) inoperable.
subsystems inoperable.
OR A.2.1 Suspend CORE Immediately AL TERA TIONS. AND A.2.2 Suspend movement of ,Immediately irradiated fuel assemblies.
AND A.2.3 Initiate action to Immediately suspend operations involving positive reactivity additions.
AND (continued)
Palisades Nuclear Plant 3.8.10-1 Amendment No.
- ACTIONS CONDITION A (continued)
A.2.4 Distribution Systems -Shutdown 3.8.10 REQUIRED ACTION COMPLETION TIME Initiate actions to Immediately restore required AC, DC, and Preferred AC bus electrical power distribution subsystems to OPERABLE status. A.2.5 Declare associated Immediately required shutdown cooling train inoperable and not in operation.
- SURVEILLANCE REQUIREMENTS SURVEILLANCE .FREQUENCY SR 3.8.10.1 Verify correct breaker alignments and voltage to 7 days required AC, DC, and Preferred AC bus electrical power distribution subsystems .
- Palisades Nuclear Plant 3.8.10-2 Amendment No.
Boron Concentration 3.9.1
- 3.9 REFUELING OPERATIONS
- 3.9.1 Boron Concentration LCO 3.9.1 Boron concentrations of the Primary Coolant System and the refueling cavity shall be maintained at the REFUELING BORON CONCENTRATION.
APPLICABILITY:
MODE 6. ACTIONS CONDITION REQUIRED ACTION ' A. Boron concentration not A.1 Suspend CORE within limit. AL TERA TIONS. AND A.2 Suspend positive reactivity additions.
AND A.3 Initiate action to restore boron concentration to within limit. SURVEILLANCE REQUIREMENTS SURVEILLANCE SR 3.9.1.1 Verify boron concentration is at the REFUELING BORON CONCENTRATION . Palisades Nuclear Plant 3.9.1-1 COMPLETION TIME Immediately Immediately Immediately FREQUENCY 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> Amendment No.
- 3.9 REFUELING OPERATIONS
3.9.2 Nuclear
Instrumentation LCO 3.9.2 Two source range channels shall be OPERABLE.
APPLICABILITY:
MODE 6. ACTIONS CONDITION REQUIRED ACTION A. One source range channel A.1 Suspend CORE inoperable.
AL TERA TIONS. AND A.2 Suspend positive
- reactivity . B. Two source range B.1 Initiate action to restore channels inoperable.
one source range channel to OPERABLE status. AND B.2 Perform SR 3.9.1.1 (PCS boron concentration verification) .
- Palisades Nuclear Plant 3.9.2-1 Nuclear Instrumentation
3.9.2 COMPLETION
TIME Immediately Immediately Immediately Once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Amendment No.
- *
- SURVEILLANCE REQUIREMENTS SR 3.9.2.1 SR 3.9.2.2 SURVEILLANCE Perform CHANNEL CHECK. -----------------------------N()l"E------------------------------
Neutron detectors are excluded from the CHANNEL CALIBRA"fl()N.
Perform CHANNEL CALIBRA"fl()N . Palisades Nuclear Plant 3.9.2-2 Nuclear Instrumentation
3.9.2 FREQUENCY
12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> 18 months Amendment No.
- *
- Containment Penetrations 3.9.3 3.9 REFUELING OPERATIONS
3.9.3 Containment
Penetrations LCO 3.9.3 APPLICABILITY:
The containment penetrations shall be in the following status: a. The equipment hatch closed and held in place by four bolts; ----------------------------------------------N()TE------------------------------------------
The equipment hatch is only required to be closed when the Fuel Handling Area Ventilation System is not in compliance with LCO 3. 7 .12, "Fuel Handling Area Ventilation System." b. One door in the personnel air lock closed; --------------------------------------------NOTE--------------------------------------------
()ne door in the personnel air lock is only required to be closed the equipment hatch is closed. c. One door in the emergency air lock closed; and d. Each penetration providing direct access from the containment atmosphere to the outside atmosphere either: 1. closed by a manual or automatic isolation valve, blind flange, or equivalent, or 2. capable of being closed by an OPERABLE Refueling Containment High Radiation Initiation signal. During CORE AL TERA TIONS, During movement of irradiated fuel assemblies within containment.
Palisades Nuclear Plant 3.9.3-1 Amendment No.
- *
- Containment Penetrations
3.9.3 ACTIONS
CONDITION REQUIRED ACTION A. One or more containment A.1 Suspend CORE AL TERA TIONS. penetrations not iri required status. A.2 Suspend movement of irradiated fuel assemblies within containment.
SURVEILLANCE REQUIREMENTS SR 3.9.3.1 SR 3.9.3.2 SURVEILLANCE Verify each required to be met containment penetration is in the required status. -----------------------------NOTE-----------------------------
Only required to be met for unisolated containment penetrations.
Verify each required automatic isolation valve closes on an actual or simulated Refueling Containment High Radiation signal. Palisades Nuclear Plant 3.9.3-2 COMPLETION TIME Immediately Immediately FREQUENCY 7 days 18 months Amendment No.
- ' ) SOC and Coolant Circulation
-High Water Level 3.9.4 3.9 REFUELING OPERATIONS
3.9.4 Shutdown
Cooling (SOC) and Coolant Circulation
-High Water Level APPLICABILITY:
One SOC train shall be OPERABLE and in operation.
NOTES------------------------------------------
- 1. The required SOC train may not be in operation for 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> per 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> period, provided no operations are permitted that would cause reduction of the Primary Coolant System boron concentration.
- 2. The required SOC train may be made inoperable for 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> per 8 hour9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> period for testing or maintenance, provided one SOC train is in operation providing flow through the reactor core, and core outlet temperature is 200°F. MODE 6 with the refueling cavity water level 647 ft elevation.
- =AC=-T=l=O=N=S==============::::;=====================::::;==============
- CONDITION A. One required SOC train inoperable or not in operation.
Palisades Nuclear Plant A.1 A.2 REQUIRED ACTION COMPLETION TIME Initiate action to restore Immediately SOC train to OPERABLE status and operation.
Suspend operations involving a reduction in primary coolant boron concentration.
3.9.4-1 Immediately (continued)
Amendment No.
- ACTIONS CONDITION A (continued)
A.3 A.4 SOC and Coolant Circulation
-High Water Level 3.9.4 REQUIRED ACTION Suspend loading irradiated fuel assemblies in the core. Close all containment penetrations providing direct access from containment atmosphere to outside atmosphere.
COMPLETION TIME Immediately 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />
- SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.4.1 Verify one SOC train is in operation and circulating 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> primary coolant at a flow rate 1000 gpm .
- Palisades Nuclear Plant 3.9.4-2 Amendment No.
- *
- 3.9 REFUELING OPERATIONS SOC and Coolant Circulation
-Low Water Level 3.9.5 3.9.5 Shutdown Cooling (SOC) and Coolant Circulation
-Low Water Level LCO 3.9.5 Two SOC trains shall be OPERABLE, and one SOC tra.in shall be in operation.
APPLICABILITY:
MODE 6 with the refueling cavity water level < 647 ft elevation.
ACTIONS CONDITION A. One SOC train inoperable.
A.1 A.2 Palisades Nuclear Plant REQUIRED ACTION COMPLETION TIME Initiate action to restore Immediately SOC train to OPERABLE status . Initiate action to establish the refueling cavity water level 647 ft elevation . 3.9.5-1 Immediately Amendment No.
- *
- ACTIONS SOC and Coolant Circulation
-Low Water Level 3.9.5 CONDITION REQUIRED ACTION COMPLETION TIME B. No SOC train OPERABLE B.1 Suspend operations Immediately or in operation.
involving a reduction in primary coolant boron concentration.
AND B.2 Initiate action to restore Immediately one SOC train to OPERABLE status and to operation.
AND B.3 Initiate action to close Immediately all containment penetrations providing direct access from containment atmosphere to outside atmosphere.
SURVEILLANCE REQUIREMENTS SURVEILLANCE FREQUENCY SR 3.9.5.1 Verify one SOC train is in operation and 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> circulating primary coolant at a flow rate of 1000 gpm. SR 3.9.5.2 Verify correct breaker alignment and indicated 7 days power available to the required SOC pump that is not in operation . Palisades Nuclear Plant 3.9.5-2 Amendment No.
- Refueling Cavity Water Level 3.9.6 3.9 REFUELING OPERATIONS
3.9.6 Refueling
Cavity Water Level LCO 3.9.6 refueling cavity water level shall be maintained 647 ft elevation.
APPLICABILITY:
During CORE AL TERA TIONS, During movement of irradiated fuel assemblies within containment.
ACTIONS CONDITION A. Refueling cavity water level not within limit. SURVEILLANCE REQUIREMENTS A.I A.2 REQUIRED ACTION Suspend CORE AL TERA TIONS . Suspend movement of irradiated fuel assemblies within containment.
SURVEILLANCE SR 3.9.6.1 Verify refueling cavity water level 647 ft elevation . Palisades Nuclear Plant 3.9.6-1 COMPLETION TIME Immediately Immediately FREQUENCY 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Amendment No.
- *
- Design Features 4.0 4.0 DESIGN FEATURES 4.1 Site Location The Palisades Nuclear Plant is located on property owned by Consumers Energy 6n the eastern shore of Lake Michigan approximately four and one-half miles south of the southern city limits of South Haven, Michigan.
The minimum distance to the boundary of the exclusion area as defined in 10 CFR 100.3 shall be 677 meters. 4.2 Reactor Core 4.2.1 4.2.2 Fuel Assemblies The reactor core shall contain 204 fuel assemblies.
Each assembly shall consist of a matrix of zircaloy-4 clad fuel rods with an initial composition of depleted, natural, or slightly enriched uranium dioxide (U0 2) as fuel material.
Limited substitutions of zirconium alloy or stainless steel filler rods for fuel rods, in accordance with approved applications of fuel rod configurations, may be used. Fuel assemblies shall be limited to those fuel designs that have been analyzed with applicable NRC staff approved codes and methods and shown by tests or analyses to comply with all fuel safety design bases. A limited number of lead test assemblies that have not completed representative testing may be placed in nonlimiting core regions. A core plug or plugs may be used to replace cine or more fuel assemblies subject to the analysis of the resulting power distribution.
Poison may be placed in the fuel bundles for long-term reactivity control. Control Rod Assemblies The reactor core shall contain 45 control rods. Four of these control rods may consist of part-length absorbers.
The control material shall be silver-indium-cadmium, as approved by the NRC. 4.3 Fuel Storage 4.3.1 Criticality 4.3.1.1 Palisades Nuclear Plant The Region I fuel storage racks (See Figure B 3.7.16-1) are designed and shall be maintained with: a. Fuel assemblies having a maximum enrichment of 4.40 weight percent; 4.0-1 Amendment No.
- *
- 4.0 DESIGN FEATURES 4.3 Fuel Storage Design Features 4.0 4.3.1 Criticality (continued) 4.3.1.2 4.3.1.3 Palisades Nuclear Plant b. Kett s 0.95 if fully flooded with unborated water, which includes allowances for uncertainties as described in Section 9.11 of the FSAR. c. A nominal 10.25 inch center to center distance between fuel assemblies with the exception of the single Type E rack which has a nominal 11.25 inch center to center distance between fuel assemblies; and d. New or partially spent fuel assemblies.
Assemblies with enrichments above 3.27 weight percent U 235 must contain 216 rods which are either U0 2 , Gd 2 0 3-U0 2 or solid metal. The Region 11 fuel storage racks (See Figure B 3. 7 .16-1) are designed and shall be maintained with; a. Fuel assemblies having maximum enrichment of 3.27 weight percent; b. Kett s 0.95 if fully flooded with unborated water, which includes allowance for uncertainties as described in Section 9.11 of the FSAR. c. A nominal 9.17 inch center to center distance between fuel assemblies; and d. Partially spent fuel assemblies which meet the discharge burnup requirements of Table 3. 7.16-1. The new fuel storage racks are designed and shall be maintained with: a. Fuel assemblies having a maximum average planar U 235 enrichment of 4.20 weight percent; b. Kett s 0.95 when flooded with either full density or low density (optimum moderation) water including allowances for uncertainties as described in Section 9.11 of the FSAR. 4.0-2 Amendment No.
- Design Features 4.0 4.0 DESIGN FEATURES 4.3 Fuel Storage 4.3.1 Criticality (continued)
- c. Assemblies must contain 216 rods which are either U0 2 , Gd 2 0 3-U0 2 or solid metal. d. The pitch of the new fuel storage rack lattice 9.375 inches and every other position in the lattice being permanently occupied by an 8" x 8" structural steel or core plugs, resulting in a nominal 13.26 inch center to center distance between fuel assemblies placed in alternating storage locations.
4.3 Fuel Storage 4.3.2 4.3.3 Drainage The spent fuel storage pool cooling system suction and discharge piping is designed and shall be maintained to prevent inadvertent draining of the pool below elevation 644 ft 5 inches . Capacity The spent fuel storage pool and north tilt pit are designed and shall be maintained with a storage capacity limited to no more than 892 fuel assemblies.
Palisades Nuclear Plant 4.0-3 Amendment No.
- 5.0 ADMINISTRATIVE CONTROLS 5.1 Responsibility Responsibility 5.1 5.1.1 The plant superintendent shall be responsible for overall plant operation and shall delegate in writing the succession for this responsibility during his absence. The plant superintendent or his designee shall approve, prior to implementation, each proposed test, experiment or modification to systems or equipment that affect nuclear safety. 5.1.2 The Shift Supervisor (SS) shall be responsible for the control room command function.
During any absence of the SS from the control room while the plant is in MODE 1, 2, 3, or 4, an individual with an active Senior Reactor Operator (SRO) license shall be designated to assume the control room command function.
During any absence of the SS from the control room while the plant is in MODE 5 or 6 an individual with an active SRO license or Reactor Operator (RO) license shall be designated to assume the control room command function . Palisades Nuclear Plant 5.0-1 Amendment No.
- *
- 5.0 ADMINISTRATIVE CONTROLS 5.2 Organization
5.2.1 Onsite
and Offsite Organizations Organization
5.2 Onsite
and offsite organizations shall be established for plant operation and corporate management, respectively.
The onsite and offsite organizations shall include the positions for activities affecting the safety of the Palisades plant. a. Lines of authority, responsibility and communication shall be established and defined for the highest management levels through intermediate levels to and including all operating organization positions.
These relationships shall be documented, and updated, as appropriate, in the form of organization charts, functional descriptions of departmental responsibilities and relationships, and job descriptions for key positions, or in equivalent forms of documentation.
These requirements and the plant specific equivalent of those titles referred to in these Technical Specifications shall be documented in the FSAR. b. The plant superintendent shall be responsible for overall plant safe operation and shall have control over those onsite activities necessary for safe operation and maintenance of the plant. c. A specified corporate executive shall have corporate responsibility for overall plant nuclear safety and shall take any measures needed to ensure acceptable performance of the staff in operating, maintaining and providing technical support to the plant to ensure nuclear safety. d. The individuals who train the operating staff and those who carry out . radiation safety and quality assurance functions may report to the appropriate onsite manager; however, they shall have sufficient organizational freedom to ensure their independence*
from operating pressures.
5.2.2 Plant
Staff a. A non-licensed operator shall be assigned when fuel is in the reactor and an additional non-licensed operator shall be assigned when the reactor is operating in MODES 1, 2, 3, or 4. b. At least one licensed Reactor Operator (RO) shall be present in the control room when fuel is in the reactor. In addition, while the plant is in MODES 1, 2, 3, or 4, at least one licensed Senior Reactor Operator (SRO) shall be present in the control room . Palisades Nuclear Plant 5.0-2 Amendment No.
Organization 5.2
- 5.2 Organization
- 5.2.2 Plant Staff (continued)
- c. Shift crew composition may be less than the minimum requirement of 1 O CFR 50.54(m)(2)(i), and 5.2.2.a and 5.2.2.g for a period of time not to exceed 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> in order to accommodate unexpected absence of on-duty shift crew members provided immediate action is taken to restore the shift crew composition to within the requirements.
- d. A radiation safety technician shall be on site when fuel is in the reactor. The position may be vacant for not more than 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />, in order to provide for unexpected absence, provided immediate action is taken to fill the required position.
- e. Administrative procedures shall be developed and implemented to limit the working hours of plant staff who perform safety-related functions (e.g., licensed SROs, licensed ROs, radiation safety personnel, auxiliary operators, and key maintenance personnel).
In the event that overtime is used, the following guidelines shall be followed:
- 1. An individual should not be permitted to work more than 16 hours1.851852e-4 days <br />0.00444 hours <br />2.645503e-5 weeks <br />6.088e-6 months <br /> straight, excluding shift turnover time; 2. An individual should not be permitted to work more than 16 hours1.851852e-4 days <br />0.00444 hours <br />2.645503e-5 weeks <br />6.088e-6 months <br /> in any 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> period, nor more than 24. hours in any 48 hour5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> period, nor more than 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> in any 7 day period, all excluding shift turnover time; 3. A break of at least 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> should be allowed between work periods, including shift turnover time; 4. Except during extended shutdown periods, the use of overtime should be considered on an individual basis and not for ttie entire staff on a shift. Any deviations from the overtime guidelines shall be authorized in advance by the plant superintendent or his designee, in accordance with approved administrative procedures, or by higher .levels of management, in accordance with established procedures and with documentation of the basis for granting*
the deviation.
Controls shall be included in the procedures such that individual overtime shall be reviewed monthly by the plant superintendent or his designee to ensure that excessive hours have not been assigned.
Routine deviation from the above guidelines is not authorized.
Palisades Nuclear Plant 5.0-3 Amendment No.
Organization 5.2
- 5.2 Organization
- 5.2.2 Plant Staff (continued)
- f. The operations manager or an assistant operations manager shall hold an SRO license. The individual holding the SRO license shall be responsible for directing the activities of the licensed operators.
- g. The Shift Technical Advisor (STA) shall provide advisory technical support to the Shift Supervisor (SS) in the areas of thermal hydraulics, reactor engineering, and plant analysis with regard to the safe operation of the plant. If either SRO on shift satisfies the Shift Engineer qualification requirements, then the STA does not need to be stationed . Palisades Nuclear Plant 5.0-4 Amendment No.
Plant Staff Qualifications 5.3
- 5.0 ADMINISTRATIVE CONTROLS *
- 5.3 Plant Staff Qualifications 5.3.1 Each member of the plant staff shall meet or exceed the minimum qualifications of ANSI N18.1-1971 for comparable positions.
5.3.2 The radiation safety manager shall meet the qualifications of a Radiation Protection Manager as defined in Regulatory Guide 1.8, September 1975. For the purpose of this section, "Equivalent," as utilized in Regulatory Guide 1.8 for the bachelor's degree requirement, may be met with four years of any one or combination of the following: (a) Formal schooling in science or engineering, or (b) operational or technical experience and training in nuclear power. 5.3.3 The Shift Technical Advisor shall have a bachelor's degree or equivalent and the Shift Engineer shall have a bachelor's degree in a scientific or engineering discipline.
Specific training for both the Shift Technical Advisor and the Shift Engineer shall include plant design, operations, and response and analysis of the plant for transients and accidents.
The Shift Engineer shall hold a Senior Reactor Operator license . 5.3.4 The plant staff who perform reviews which ensure compliance with 10 CFR 50.59 shall meet or exceed the minimum qualifications of ANS 3.1-1987, Section 4.7.1 and 4.7.2. A Senior Reactor Operator license or certification shall be considered equivalent to a bachelors degree for the purpose of this . specification . Palisades Nuclear Plant 5.0-5 Amendment No.
Procedures 5.4
- 5.0 ADMINISTRATIVE CONTROLS 5.4 Procedures
- 5.4.1 Written procedures shall be established, implemented, and maintained covering the activities referenced below: a. The applicable procedures recommended in of Regulatory Guide 1.33, . Revision 2, February 1978. b. The emergency operating procedures required to implement the requirements of NUREG-0737 and NUREG-0737, Supplement 1, as *stated in Generic Letter 82-33; c. Site Fire Protection Program implementation.
- d. All programs specified in S!pecification 5.5 . Palisades Nuclear Plant 5.0-6 Amendment No.
Programs and Manuals 5.5
- 5.0 ADMINISTRATIVE CONTROLS 5.5 Programs and Manuals *
- The following programs shall be established, implemented, and maintained:
5.5.1 Offsite
Dose Calculation Manual (ODCM) a. The ODCM shall contain the methodology and parameters used in the calculation of offsite doses resulting from radioactive gaseous and liquid effluents, in the calculation of gaseous and liquid effluent monitoring alarm and trip setpoints, and in the conduct of the radiological environmental monitoring program; and b. The ODCM shall also contain (1) the radioactive effluent controls and radiological environmental monitoring activities and (2) descriptions of the information that should be included in the Radiological Environmental Operating Report, and Radioactive Effluent Release Report required by Specification 5.6.2 and Specification 5.6.3. c. Changes to ODCM: 1 . Shall be documented and records of reviews performed shall be retained.
This documentation shall contain: a. Sufficient information to support the change together with the appropriate analyses or evaluations justifying the changes, and b. A determination that the change will maintain the level of radioactive effluent control required by 10 CFR 20.1302, 40 CFR 190, 10 CFR 50.36a, and 10 CFR 50, Appendix I, and not adversely impact the accuracy or reliability of effluent, dose, or setpoint calculations.
- 2. Shall become effective after approval by the plant superintendent.
- 3. Shall be submitted to the NRC in the form of a complete, legible copy of the entire ODCM as a part of or concurrent with the Radioactive Effluent Release Report for the period of the report in which any change to the ODCM was made. Each change shall be identified by markings in the margin of the affected pages, clearly indicating the area of the page that was changed, and shall indicate the date (e.g., month/year) the change was implemented . Palisades Nuclear Plant 5.0-7 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.2 Primary Coolant Sources Outside Containment This program provides controls to minimize leakage to the engineered safeguards rooms, from those portions of systems outside containment that could contain highly radioactive fluids during a serious transient or accident, to as low as practical.
The systems include the Containment Spray System, the Safety Injection System, the Shutdown Cooling System, and the containment sump suction piping. This program shall include the following:
- a. Provisions establishing preventive maintenance and periodic visual inspection requirements, and b. Integrated leak test requirements for each system at a frequency not to exceed refueling cycle intervals.
- c. The portion of the shutdown cooling system that is outside the containment shall be tested either by use in normal operation or hydrostatically tested at 255 psig. d. Piping from valves CV-3029 and CV-3030 to the discharge of the safety injection pumps and containment spray pumps shall be hydrostatically tested at no less than 100 psig.
- e. The maximum allowable leakage from the recirculation heat removal systems' components (which include valve stems, flanges and pump seals) shall not exceed 0.2 gallon per minute under the normal hydrostatic head from the SIRW tank (approximately 44 psig). 5.5.3 Post Accident Sampling Program This program provides controls which will ensure the capability to accurately determine the airborne iodine concentration in vital areas and which will ensure the capability to obtain and analyze reactor coolant, radioactive gases and particulates in plant gaseous effluents, and containment atmosphere samples under accident conditions.
This program shall include the following:
- a. Training of personnel, b. Procedures for sampling and analysis, and c. Provisions for maintenance of sampling and analytic equipment.
Palisades Nuclear Plant 5.0-8 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.4 Radioactive Effluent Controls Program A program shall be provided conforming with 10 CFR 50.36a for the control of radioactive effluents and for maintaining the doses to members of the public from radioactive effluents as low as reasonably achievable.
The program (1) shall be contained in the Offsite Dose Calculation Manual (ODCM), (2) shall be implemented by operating procedures, and (3) shall include remedial actions to be taken whenever the program limits are exceeded.
The program shall include the following elements:
- a. Limitations on the functional capability of radioactive liquid and gaseous monitoring instrumentation including surveillance tests and setpoint determination in accordance with the methodology in the ODCM, b. Limitations on the concentrations of radioactive material released in liquid effluents to unrestricted areas conforming to 10 times the value in c. d. e. f. g. h. 1 O CFR 20, Appendix B, Table 2, Column 2. Monitoring, sampling, and analysis of radioactive liquid and gaseous effluents in accordance with 10 CFR 20.1302 and with the methodology and parameters in the ODCM, Limitation on the annual and quarterly doses or dose commitment to a member of the public from radioactive materials in liquid effluents released from each plant to unrestricted areas conforming to 10 CFR 50, Appendix I, Limitations on the dose rate resulting from radioactive material released in gaseous effluents to areas beyond the site boundary conforming to the doses associated with 10 times the value listed in 10 CFR 20, Appendix B, Table 2, Column 1. Limitations on the annual and quarterly air doses resulting from noble gases released in gaseous effluents from each unit to areas beyond the site boundary conforming to 10 CFR 50, Appendix I, Limitations on the annual and quarterly doses to a member of the public from lodine-131, lodine-133, tritium and all radionuclides in particulate form with half-lives greater than 8 days in gaseous effluents released from each plant to areas beyond the site boundary conforming to 10 CFR 50, Appendix I, Limitations on the annual doses or dose commitment to any member of the public due to releases of radioactivity and to radiation from uranium fuel cycle sources conforming to 40 CFR 190 . ' . Palisades Nuclear Plant 5.0-9 Amendment No.
- *
- Programs and Manuals 5.5 5.5 Programs and Manuals 5.5.5 Containment Structural Integrity Surveillance Program 5.5.6 This program provides controls for monitoring any tendon degradation in pre-stressed concrete containments, including effectiveness of its corrosion protection mepium, to ensure containment structural integrity.
The program shall include baseline measurements prior to initial operations.
The Containment Structural Integrity Surveillance Program, inspection frequencies, and acceptance criteria shall be in accordance with ASME Boiler and Pressure Vessel Code,Section XI, Subsection IWE and IWL. If, as a result of a tendon inspection, corrective retensioning of five percent (8) or more of the total number of dome tendons is necessary to restore their liftoff forces to within the limits, a dome delamination inspection shall be performed within 90 days following such corrective retensioning.
The results of this inspection shall be reported to the NRC in accordance with Specification 5.6.7, "Containment Structural Integrity Surveillance Report." The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Containment Structural Integrity Surveillance Program inspection frequencies . Primary Coolant Pump Flywheel Surveillance Program a. Surveillance of the primary coolant pump flywheels shall consist of a 100% volumetric inspection of the upper flywheels each 10 years. b. The provisions of SR 3.0.2 are not applicable to the Flywheel Testing Program . Palisades Nuclear Plant 5.0-10 Amendment No. -
Programs and Manuals 5.5
- 5.5 Programs and Manuals **
- 5.5.7 lnservice Testing Program This program provides controls for inservice testing of ASME Code Class 1, 2, and 3 components.*
The program shall include the following:
- a. Testing frequencies specified in Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda (B&PV Code) as follows: B&PV Code terminology for inservice testing activities Weekly Monthly , Quarterly or every 3 months . Semiannually or every 6 months Every 9 months Yearly or annually
- Biennially or every 2 years Required interval for performing inservice testing activities
- 7 days .
- > 31 days .:> 92 days .:> 184 days .:> 276 days ::; 366 days .:> 731 days b. The provisions of SR 3.0.2 are applicable to the above required intervals for performing inservice testing activities;
- c. The provisions of SR 3.0.3 are applicable to inservice testing activities; and d. Nothing in the B&PV Code shall be construed to supersede the requirements of any Technical Specification.
5.5.8 Steam
Generator Tube Surveillance Program This program provides controls for surveillance testing of the Steam Generator (SG) tubes to ensure that the structural integrity of this portion of the Primary Coolant System (PCS) is maintained.
The program shall contain controls to ensure: a. Steam Generator Tube Sample Selection and Inspection The inservice inspection may be limited to one SG on a rotating schedule encompassing 6% of the tubes if the results of previous inspections indicate that both SGs are performing in a like manner. If the operating conditions in one SG are found to be more severe than those in the other SG, the sample sequence shall be modified to inspect the most severe conditions . Palisades Nuclear Plant 5.0-11 Amendment No.
Programs and Manuals 5.5.
- 5.5 Programs and Manuals *
- 5.5.8 Steam Generator Tube Surveillance Program a. Steam Generator Tube Sample Selection and Inspection (continued)
The SG tube minimum sample size, inspection result classification, and the corresponding action required shall be as specified in Table 5.5.8-1. The tubes selected for each inservice inspection shall include at least 3% of the total number of tubes in all SGs; the tubes selected for these inspections shall be selected on a random basis except: 1. Where experience in similar plants with similar water chemistry indicates critical areas to be inspected, then at least 50% of the tubes inspected shall be from these critical areas. 2. The first sample of tubes selected for each inservice of each SG shall include: a) All nonplugged tubes that previously had detectable wall b) penetrations greater than 20%.
- Tubes in those areas where experience has indicated potential problems . c) A tube inspection shall be performed on each selected tube. If any selected tuqe does not permit the passage of the eddy current probe for a tube inspection, this shall be recorded and an adjacent tube shall be selected and subjected to a tube inspection.
- 3. The tubes selected as the second and third samples (if required by Table 5.5.8-1) during each inservice inspection may be subjected to a partial tube inspection provided:
Palisades Nuclear Plant a) The tubes selected for these samples include the tubes from those areas of the tube sheet array where tubes with imperfections were previously found. b) The inspections include those portions of the tubes where
- imperfections were previously found . 5.0-12 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.8 Steam Generator Tube Surveillance Program *a. Steam Generator Tube Sample Selection and Inspection (continued)
- 4. The re.suits of each sample inspection shall be classified into one of the following three categories:
Category C-1 C-2 C-3 NOTE: Inspection Results* Less than 5% of the total.tubes inspected are degraded tubes and none of the inspected tubes are defective.
One or more tubes, but not more than 1 % of the total tubes inspected are defective, or between 5% and 10% of the total tubes inspected are degraded tubes. More than 10% of the total tubes inspected are degraded tubes or more than 1 % of the inspected tubes are defective.
- In all inspections, previously degraded tubes must exhibit significant (greater than 10%) further wall penetrations to be included in the above percentage calculations.
- b. Inspection FreguenCies The above required inservice inspection of SG tubes shall be performed at the following frequencies:
- 1. lnservice inspections shall be performed at intervals of not less than 12 nor more than 24 calendar months after the previous inspection.
If two consecutive inspections following service under Avr conditions, not including the preservice inspection, result in all inspections results falling into the C-1 category or if two consecutive inspections demonstrate that previously observed degradation has not continued and no additional degradation has occurred, the inspection interval may be extended to a maximum of once per 40 months . Palisades Nuclear Plant 5.0-13 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.8 Steam Generator Tube Surveillance Program b. Inspection Frequencies (continued)
- 2. If the results of the inservice inspection of a SG conducted in accordance with Table 5.5.8-1 at 40 month intervals fall into Category C-3, the inspection frequency shall be increased to at least once per 20 months. The increase in inspection frequency shall apply until the subsequent inspections satisfy the criteria of Specification 5.5.8.b.1; the interval may then be extended to a maximum of once per 40 months. 3. Additional, unscheduled inservice inspections shall be performed on each SG in accordance with the first sample inspection specified in Table 5.5.8-1 during the shutdown subsequent to any of the following conditions:
a) Primary-to-secondary tube leaks (not including leaks originating from tube-to-tube sheet welds) in exce$S of the limits of LCO 3.4.13. b) A seismic occurrence greater than the Operating Basis
- c) A loss-of-coolant accident resulting in initiation of flow of the engineered safeguards.
d) A main steam line or main feedwater line break. c. Acceptance Criteria 1. As used in this Specification:
Palisades Nuclear Plant a) Imperfection means an exception to the dimensions, finish or contour of a tube from that required fabrication drawings or specifications.
Eddy-current testing indications below 20% of the nominal tube wall thickness, if detectable, may be considered as imperfections.
b) Degradation means a service-induced cracking, wastage, wear or general corrosion occ1,.1rring on either inside or outside of a tube. c) Degraded Tube means a tube containing imperfections greater than or equal to 20% of the nominal wall thickness
- caused by degradation . 5.0-14 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.8 Steam Generator Tube Surveillance Program b. Inspection Frequencies (continued) d) % Degradation means the percentage of the tube wall thickness affected or removed by degradation.
e) Defect means an imperfection of such severity that it exceeds the plugging limit. A tube containing a defect is. defective.
f) Plugging Limit means the imperfection depth at or beyond which the tube shall be removed from service and is equal to 40% of the nominal tube wall thickness.
g) Unserviceable described the condition of a tube if it leaks or contains a defect large enough to affect its structural integrity in the event of an Operating Basis Earthquake, a loss-of-coolant accident, or a steam line or feedwater line break as specified in 5.5.8.b.3, above . h) Tube Inspection means an inspection of the SG tube from the point of entry (hot leg side) completely around the U-bend to the top support of the cold leg. i) Preservice Inspection means an inspection of the full length of each tube in SG performed by eddy current techniques prior to service to establish a baseline condition of the tubing. This inspection shall be performed
- after the shop hydrostatic test and prior to initial POWER OPERATION using the equipment and techniques expected to be used during subsequent inspections.
- 2. The SG shall be determined OPERABLE after completing the corresponding actions (plug all tubes exceeding the plugging limit and all tubes containing through-wall cracks) required by Table 5.5.8-1. The provisions of SR 3.0.2 are applicable to the Steam Generator Tube Surveillance Program . Palisades Nuclear Plant 5.0-15 Amendment No.
- *
- TABLE 5.5.8-1 Programs and Manuals 5.5 STEAM GENERATOR TUBE INSPECTION 1 ST SAMPLE INSPECTION 1 2ND SAMPLE INSPECTION 3RD SAMPLE INSPECTION Result Action Required Result Action Required Result Action Required C-1 None
- N/A N/A N/A N/A C-2 Plug defective tubes and inspect additional 2S tubes in this SG. C-1 None N/A N/A C-3 Inspect all tubes in C-2 Plug defective C-1 None this SG, plug tubes and inspect C-2 Plug defective defective tubes and additional 4S tubes inspect 2S tubes in in this SG. tubes each other SG. C-3 Perform action for C-3 result of first Sample C-3 Perform action for N/A N/A C-3 result of first Sample All None N/A N/A other SGs are C-1 Some Perform action for N/A NIA SGs C-2 result of C-2 but second sample no other SGis C-3. Other Inspect all tubes N/A N/A SG is each SG and plug C-3 defective tubes NOTES: 1 The minimum sample size for the first sample inspection is S tubes per SG where S=(6/n)%,,where n is the number of steam generators inspected during an inspection . Palisades Nuclear Plant 5.0-16 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.9 Secondary Water Chemistry Program 5.5.10 A program shall be established, implemented and maintained for monitoring of secondary water chemistry to inhibit steam generator tube degradation and shall include: a. Identification of a sampling schedule for the critical variables and control. points for these variables, b. Identification of the procedures used to measure the values of the critical variables, c. Identification of process sampling points, which shall include monitoring the discharge of the condensate pumps for evidence of condenser leakage, d. Procedures for the recording and management of data, e. Procedures defining corrective actions for all off-control point chemistry conditions, and f. A procedure identifying (a) the authority responsible for the interpretation of the data, and (b) the sequence and timing of administrative events required to initiate corrective actions. Ventilation Filter Testing Program A program shall be established to implement the following required testing of Control Room Ventilation (CRV) and Fuel Handling Area Ventilation systems at the frequencies specified in Regulatory Guide 1.52, Revision 2 (RG 1.52), and in accordance with RG 1.52 and ASME N510-1989, at the system flowrates and tolerances specified below*: a. Demonstrate for each of the ventilation systems that an inplace test of the High Efficiency Particulate Air (HEPA) filters shows a penetration and system bypass < 0.05% for the CRV and < 1.00% for the Fuel Handling . Area Ventilation System when tested in accordance with RG 1.52 and ASME N510-1989:
Ventilation System V-BA or V-88 V-BA and V-88 V-95 orV-96 Flowrate (CFM) 7300 +/- 20% 10,000 +/- 20% 12,500 +/- 10% Palisades Nuclear Plant 5.0-17 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *-* 5.5.10 Ventilation Filter Testing Program (continued)
- b. , I Demonstrate for each of the ventilation systems that an inplace test of the charcoal adsorber shows a penetration and system bypass< 0.05% for the CRV and< 1.00% for the Fuel Handling Area Ventilation System when tested in accordance with RG 1.52 and ASME N510-1989.
Ventilation System V-8A and V-88 V-26A and V-268 Flowrate (CFM) 10,000 +/- 20% 3200 +10% -5% c. Demonstrate for each of the ventilation systems that a laboratory test of a sample of the charcoal adsorber, when obtained as described in RG 1.52 shows the methyl iodide penetration less than the value specified below when tested in accordance with ASTM D3803-1989 at a temperature of d. 30°C and equal to the relative humidity specified as follows: Ventilation System VF-66 VFC-26A and VFC-268 Penetration 6.00% -0.157% Relative Humidity 95% 70%. For each of the ventilation systems, demonstrate the pressure drop across the combined HEPA filters, the prefilters, and the charcoal adsorbers is less than the value specified below when tested in accordance with RG 1.52 and ASME N510-1989:
Ventilation System V-8A and V-88 VF-26A and VF-268 Delta P (In H 2 Ql 6.0 8.0 Flowrate (CFM) 10,000 +/- 20% 3200 +10% -5% e. Demonstrate that the heaters for the CRV system dissipates the following specified value+/- 20% when tested in accordance with ASME N510-1989:
Ventilation System VHX-26A and VHX-268 Wattage 15 kW The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Ventilation Filter Testing Program frequencies.
- Should the 720-hour limitation on charcoal adsorber operation occur during a plant operation requiring the use of the charcoal adsorber -such as refueling
-testing may be delayed until the completion of the plant operation or up to 1,500 hours0.00579 days <br />0.139 hours <br />8.267196e-4 weeks <br />1.9025e-4 months <br /> of filter operation; whichever occurs first. Palisades Nuclear Plant 5.0-18 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.11 5.5.12 Fuel Oil Testing Program A fuel oil testing program to implement required testing of both new fuel oil and stored fuel oil shall be established.
The program shall include sampling requirements, testing requirements, and acceptance criteria, based on the diesel manufacturer's specifications and applicable ASTM Standards.
The program shall establish the following:
- a. Acceptability of new fuel oil prior to addition to the Fuel Oil Storage Tank, and acceptability of fuel oil stored in the Fuel Oil Storage Tank, by determining that the fuel oil has the following properties within limits: 1. API gravity or an absolute specific gravity, 2.. Kinematic viscosity, and 3. Water and sediment content. b. Other properties of fuel oil stored in the Fuel Oil Storage Tank, specified by the diesel manufacturers or specified for grade 20 fuel oil in ASTM D 975, are within limits . The provisions of SR 3 .. 0.2 and SR 3.0.3 are applicable to the Fuel Oil Testing Program. Technical Specifications
'(TS) Bases Control Program This. program provides a means for processing changes to the Bases of these. Technical Specifications.
- a. Changes to the Bases of the TS shall be made under appropriate administrative controls and reviews. b. Licensees may make changes to Bases without prior NRC approval . provided the changes do not involve either of the following:
- 1. A change in the TS incorporated in the license; or 2. A change to the updated FSAR or Bases that involves an unreviewed safety question as defined in 10 CFR 50.59 . Palisades Nuclear Plant 5.0-19 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.12 5.5.13 Technical Specifications (TS) Bases Control Program (continued)
- c. The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the FSAR. d. Proposed changes that meet the criteria of Specification 5.5.12.b.
above shall be reviewed and approved by the NRC prior to implementation.
Changes to the Bases implemented without prior NRC approval shall be provided to the NRC on a frequency consistent with 10 CFR 50.71 (e). -Safety Functions Determination Program (SFDP) This program ensures loss of safety function is detected and appropriate actions taken. Upon entry into LCO 3.0.6, an evaluation shall be made to determine.
if loss of safety function exists. Additionally, other appropriate limitations and remedial or compensatory actions may be identified to be taken as a result of the support system inoperability and corresponding exception to entering supported system Condition and Required Actions. This program implements the requirements of LCO 3.0.6. The SFDP shall contain the following:
- a. Provisions for cross train checks to ensure a loss of the capability to perform the safety function assumed in the accident analysis does not go undetected;
- b. Provisions for ensuring the plant is maintained in a safe condition if a loss of function condition exists; c.
- Provisio.ns to ensure that an inoperable supported system's Completion Time is not inappropriately extended as a result of multiple support system inoperabilities; and d. Other appropriate limitations and remedial or compensatory actions. A loss of safety function exists when, assuming no concurrent single failure, a safety function assumed in the accident analysis cannot be performed.
For the purpose of this program, a loss of safety function may exist when a support system is inoperable, and: a. A required system redundant to system(s) supported by the inoperable support system is also inoperable; or b. A required system redundant to system(s) in turn supported by the inoperable supported system is also inoperable; or Palisades Nuclear Plant 5.0-20 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.13 5.5.14 Safety Functions Determination Program (SFDP) (continued)
- c. A required system redundant to support system(s) for the supported systems (a) and (b) above is also inoperable.
The SFDP identifies where a loss of safety function exists. If a loss of safety function is determined to exist by this program, the appropriate Conditions and Required Actions of the LCO in which the loss of safety function exists are required to be entered. Containment Leak Rate Testing Program Programs shall be established to implement the leak rate testing of the containment as required by 10 CFR 50.54(0) and 10 CFR 50, Appendix J, Option B, as modified by approved exemptions.
The Type A test program shall meet the requirements of 1 O CFR 50, Appendix J, Option B and shall be in accordance with the guidelines of Regulatory Guide "Performance-Based Containment Leakage-Test Program, dated September 1995." The Type B and Type C test program shall meet the requirements of 1 O CFR 50, . ' Appendix J, Option A, as modified by the exemption from certain requirements of 10 CFR 50 Appendix J which was granted in an NRC letter to Consumers Power Company dated December 6,
- 1989. The peak calculated containment internal pressure for the design basis loss of coolant accident, par is 52.64 psig. The maximum allowable containment leak rate, L 3 , at Pa* shall be 0.1 % of. containment air weight per day. Local leak rate tests, other than Personnel Airlock doors between the seals tests, shall be performed at 55 psig. Local leak rate tests for checking airlock doors seals within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> of each door opening shall be performed as follows: a.. A between the seals test shall be performed on the Personnel Airlock at 10 psig. b. A full pressure test shall be performed on the Emergency Escape Airlock at psig. A seal contact check shall be performed on the Emergency Escape Airlock following each full pressure test. Emergency Escape Airlock door opening, solely for the purpose of strongback removal and performance of the seal contact check, does not necessitate additional pressure testing. Palisades Nuclear Plant 5.0-21 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.14 5.5.15 Containment Leak Rate Testing Program (continued)
Leak rate acceptance criteria are: a. Containment leak rate acceptance criteria is ::; 1.0 La. During the first plant startup following testing in accordance with this program, the leak rate acceptance criteria are ::; 0.60 La for the Type B and Type C tests and ::; 0. 75 La for Type A tests; b. The leakage for a Personnel Airlock door seal test shall not exceed 0.023 La. c. An acceptable Emergency Escape Airlock door seal contact check consists of a verification of co.ntinuous contact between the seals and the sealing surfaces.
Containment OPERABILITY is equivalent to "Containment Integrity" for the purposes of the air lock testing requirements in 10 CFR 50, Appendix J. The provisions of SR 3.0.2 are not applicable to the Containment Leak Rate Testing Program requirements . The provisions of SR 3.0.3 are applicable to the Containment Leak Rate Testing Program requirements.
Process Control Program a. The Process Control Program shall contain the current formula, sampling, analyses, tests, and determinations to be made to ensure that the processing and packaging of solid radioactive wastes based on demonstrated processing of actual or simulated wet solid wastes will be accomplished in such a way as to *assure compliance with 10 CFR 20, 10 CFR 71, Federal and State regulations, and other requirements governing the disposal of the radioactive waste. b. Changes to the Process Control Program: 1. Shall be documented and records of reviews performed shall be retained as required by the Quality Program, CPC-2A. This documentation shall contain: a) Sufficient information to support the change together with the appropriate analyses or evaluation justifying the change(s) and Palisades Nuclear Plant 5.0-22 Amendment No.
Programs and Manuals 5.5
- 5.5 Programs and Manuals *
- 5.5.15 Process Control Program (continued) b) A determination that the change will maintain the overall conformance of the solidified waste product to existing requirements of Federal, State, or other applicable regulations.
- 2. Shall become effective after approval by the plant superintendent.
Palisades Nuclear Plant 5.0-23 Amendment No.
- *
- Reporting Requirements 5.6 5.0 ADMINISTRATIVE CONTROLS . 5.6 Reporting Requirements The following reports shall be submitted in accordance with 1 O CFR 50.4 .. 5.6.1 Occupational Radiation Exposure Report 5.6.2 This report shall include a tabulation on an annual basis of the number of stations, utility and other personnel (including contractors), for whom monitoring was performed, receiving an annual deep dose equivalent greater than 100 mrem and the associated deep dose equivalent (reported in person-rem) according to work and job functions (e.g., reactor operations and surveillance, inservice inspection, routine maintenance, special maintenance
[describe maintenance], waste processing and refueling).
This tabulation supplements the requirements of 10 CFR 20.2206. The dose assignments to various duty functions may be estimated based OM pocket ionization chamber, electronic dosimeter, TLD, or film badge measurements.
Small exposures totaling less
- than 20% of the individual total dose need not be accounted for. In the aggregate, at least 80% of the total deep dose equivalent external sources should be assigned to specific major work functions.
The report covering the previous calendar year shall be submitted by April 30 of each year . Radiological Environmental Operating Report
- The Radiological Environmental Operating Report covering the operation of the plant during the previous calendar year shall be submitted before May 15 of each year. The report shall include summaries, interpretations, and analysis of trends of the results of the radiological environmental monitoring program for the reporting period. The material provided shall be consistent with the objectives outlined in the Offsite Dose Calculation Manual and in 10 CFR 50, Appendix I, Sections IV.8.2, IV.8.3, and IV.C. 5.6.3 Radioactive Effluent Release Report The Radioactive Effluent Release Report covering operation of the plant in the previous year shall be submitted prior to May 1 of each year in accordance with 1 O CFR 50.36a. The report shall include a summary of the quantities of radioactive liquid and gaseous effluents and solid waste released from the plant. The material provided shall be consistent with the objectives outlined in the Offsite Dose Calculation Manual and Process Control Program, and shall be in conformance with 10 CFR 50.36a and 10 CFR 50, Appendix I, Section IV.8.1 . Palisades Nuclear Plant 5.0-24 Amendment No.
'---Reporting Requirements 5.6 *. 5.6 Reporting Requirements
- 5.6.4 Monthly Operating Report Routine reports of operating statistics and shutdown experience shall be submitted on a monthly basis to the NRC no later than the fifteenth of each month following the calendar month covered by the report. 5.6.5 CORE OPERATING LIMITS REPORT (COLR) a. Core operating limits shall be established prior to each reload cycle, or prior to 'any remaining portion of a reload cycle, and shall be documented in the COLR for the following:
- b. 3.1.1 Shutdown Margin 3.1.6 Regulating Rod Group Position Limits 3.2.1 Linear Heat Rate Limits 3.2.2 Radial Peaking Factor Limits 3.2.4 ASI Limits . The analytical methods used to determine the core operating limits shall be those approved by the NRC, specifically those described in the latest approved revision of the following documents:
- 1. XN-75-27(A), "Exxon Nuclear Neutronics Design Methods for Pressurized Water Reactors," and Supplements 1 (A), 2(A), 3(P)(A), 4(P)(A), and 5(P)(A); Exxon Nuclear Company. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 2. ANF-84-73(P)(A), "Advanced Nuclear Fuels Methodology for Pressurized Water Reactors:
Analysis of Chapter 15 Events," and Appendix B(P)(A) and Supplements 1 (P)(A), 2(P)(A); Advanced Nuclear Fuels Corporation. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 3. XN-NF-82-21 (P)(A), "Application of Exxon Nuclear Company PWR Thermal Margin Methodology to Mixed Core Configurations," Exxon Nuclear Company. (LCOs 3.2.1, 3.2.2, & 3.2.4) 4. ANF-84-093(P)(A), "Steamline Break Methodology for PWRs," and Supplement 1 (P)(A); Advanced Nuclear Fuels Corporation. (LCOs 3.1.1, 3.1.6, 3.2.1, 3.2.2, & 3.2.4) . Palisades Nuclear Plant 5.0-25 Amendment No.
Reporting Requirements 5.6
- 5.6 Reporting Requirements
- 5.6.5 CORE OPERATING LIMITS REPORT (COLR) (continued)
- 5. XN-75-32(P)(A), "Computational Procedure for Evaluating Fuel Rod Bowing," and Supplements 1 (P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. (LCOs 3.1.6, 3.2.1, 3.2.2, & 3.2.4) 6. EXEM PWR Large Break LOCA Model as defined by: (LCOs 3.1.6, 3.2.1, & 3.2.2) a) XN-NF-82-20(A), "Exxon Nuclear Company Evaluation Model EXEM/PWR ECCS Model Updates," and Supplements 1 (P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company.
- b) XN-NF-82-0?(P)(A), "Exxon Nuclear Company ECCS Cladding Swelling and Rupture Model," Exxon Nuclear Company. c) XN-NF-81-58(A), "RODEX2 Fuel Rod Thermal-Mechanical Response Evaluation Model," and Supplements.1(P)(A), 2(P)(A), 3(P)(A), and 4(P)(A); Exxon Nuclear Company. d) XN-NF-85-16(A), "PWR 17x17 Fuel Cooling Tests Program," Volume 1 and Supplements 1 (P)(A), 2(P)(A), and 3(P)(A), and Volume 2 and Supplement 1 (P)(A); Exxon Nuclear Company. e) XN-NF-85-105(A), "Scaling of FCTF Based Reflood Heat Transfer Correlation for other Bundle Designs," and Supplement 1 (P)(A); Exxon Nuclear Company. 7. XN-NF-78-44(A), "A Generic Analysis of the Control Rod Ejection Transient for Pressurized Water Reactors," Exxon Nuclear Company. (LCOs 3.1.6, 3.2.1, & 3:2.2) 8. ANF-1224(P)(A), "Departure from Nucleate Boiling Correlation for High Thermal Performance Fuel," and Supplement 1 (P)(A); Advanced Nuclear Fuels Corporation.
- 9. Palisades Nuclear Plant (LCOs 3.2.1, 3.2.2, & 3.2.4) ANF-89-151 (P)(A), "ANF-RELAP Methodology for Pressurized Water Reactors:
Analysis of Non-LOCA Chapter 15 Events," Advanced Nuclear Fuels Corporation. (LCOs 3.1.(3, 3.2.1, 3.2.2, & 3.2.4) 5.0-26 Amendment No.
Reporting Requirements 5.6
- 5.6 Reporting Requirements
- ** 5.6.5 CORE OPERATING LIMITS REPORT (COLR) (continued) 5.6.6 5.6.7 10. EMF-92-153(P)(A), "HTP: Departure from Nucleate Boiling Correlation for High Thermal Performance Fuel," Siemens Power Corporation. (LCOs 3.2.1, 3.2.2, & 3.2.4) c. The core operating limits shall be determined such that all applicable
- limits (e.g., fuel thermal mechanical limits, core thermal hydraulic limits, Emergency Core Cooling Systems limits, nuclear limits such as shutdown margin, transient analysis limits, and accident analysis limits) of the safety analysis are met. d. The COLR, including any mid cycle revisions or supplements, shall be provided, upon issuance for each reload cycle, to the NRC. Post Accident Monitoring Report When a report is required .by LCO 3.3.7, "Post Accident Monitoring Instrumentation," a report shall be submitted within the following 14 days. The report shall outline the preplanned alternate method of monitoring, the cause of the inoperability, and the plans and schedule for restoring the instrumentation channels to OPERABLE Containment Structural Integrity Surveillance Report Reports shall be submitted to the NRC covering Prestressing, Anchorage, and Dome Delamination tests within 90 days after completion of the tests. 5.6.8 Steam Generator Tube Surveillance Report The following reports shall be submitted to the Commission following each inservice inspection of steam generator tubes: *a. The number of tubes plugged in each steam generator shall be reported to the Commission within 15 days following the completion of each inspection, and Palisades Nuclear Plant 5.0-27 Amendment No.
Reporting Requirements 5:6
- 5.6 Reporting Requirements
- 5.6.8 Steam Generator Tube Surveillance Report (continued)
- b. The complete results of the steam generator tube inservice inspection shall be reported to the Commission within 12 months following completion of the inspection.
This report shalt include: 1. Number and extent of tubes inspected.
- 2. Location and percent of wall-thickness penetration for each indication of an imperfection.
- 3. Identification of tubes plugged. c. Results of steam generator t4be inspections that fall into Category C-3 shall require 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> verbal notification to the NRC prior to resumption of plant operation.
A written followup within the next 30 days shall provide a description of investigations and corrective measures taken to prevent recurrence . Palisades Nuclear Plant 5.0-28 Amendment No.
- 5.0 ADMINISTRATIVE CONTROLS 5. 7 High Radiation Area *
- L_ ___ _ 5. 7.1 Pursuant to 10 CFR 20, paragraph 20.1601(c), in lieu of the requirements of 10 CFR 20.1601, each high radiation area, as defined in 10 CFR 20, in which the intensity of radiation is > 100 mrem/hr but < 1000 mrem/hr, shall be barricaded and conspicuously posted as a high radiation area arid entrance thereto shall be controlled by requiring issuance of a Radiation Work Permit (RWP). Individuals qualified in radiation protection procedures (e.g., radiation safety technicians) or personnel continuously escorted by such individuals may be exempt from the RWP issuance requirement during the performance of their assigned duties in high radiation areas with exposure rates < 1000 mrem/hr, provided they are otherwise following plant radiation protection procedures for entry into such high radiation areas. Any individual or group of individuals permitted to enter such areas shall be provided with or accompanied by one or more of the following:
- a. A radiation monitoring device that continuously indicates the radiation dose rate in the area. b. A radiation monitoring device that continuously integrates the radiation dose rate in the area and alarms when a preset integrated dose is received.
Entry into such areas with this monitoring device may be made after the dose rate levels in the area have been established and personnel are aware of them. c. An individual qualified in radiation protection procedures with a radiation dose rate monitoring device, who is responsible for providing positive
- control over the activities within the area and shall perform periodic radiation surveillance at the frequency specified by the Radiation Work Request. 5.7.2 In addition to the requirements of Specification 5.7.1, except as allowed by 5.7.3, areas with radiation levels 1000 mrem/hr shall be provided with locked or continuously guarded doors to prevent unauthorized entry and the keys shall be maintained under the administrative control of the Shift Supervisor on duty or radiation safety supervision.
Doors shall remain lo.eked except during periods of access by personnel under an approved RWP that shall specify the dose rate levels in the immediate work areas and the maximum allowable stay times for individuals in those areas. In lieu of the stay time specification of the RWP, direct or remote (such as closed circuit TV cameras) continuous surveillance
- may be made by personnel qualified in radiation protection procedures to provide positive exposure control over the activities being performed within the area . Palisades Nuclear Plant 5.0-29 . Amendment No.
High Radiation Area . . 5_j .
- 5. 7 High Radiation Area *
- 5.7.3 For individual high radiation areas with radiation levels 1000 mrem/hr, accessible to personnel, that are located within large areas 'Such as" containment, where no enclosure exists for purposes of lockirig, or that cannot be continuously guarded, and where no. enclosure.can be.reasonably constructed around the individual area, that area shaJI be barricaded and conspicuously posted, and a flashing light shall be activated as warning device. * *
- Palisades Nuclear Plant 5.0-30 No.