ML18065A334
| ML18065A334 | |
| Person / Time | |
|---|---|
| Site: | Palisades  |
| Issue date: | 12/06/1995 |
| From: | CONSUMERS ENERGY CO. (FORMERLY CONSUMERS POWER CO.) |
| To: | |
| Shared Package | |
| ML18065A333 | List: |
| References | |
| NUDOCS 9512120026 | |
| Download: ML18065A334 (7) | |
Text
P.SADES PLANT TECHNICAL SPECIFIC.ONS TABLE OF CONTENTS SECTION DESCRIPTION 3.0 LIMITING CONDITIONS FOR OPERATION (continued) 3.10 3.10.1 3.10.2 3.10.3 3.10.4 3.10.5 3.10.6 3.10.7 CONTROL ROD AND POWER DISTRIBUTION LIMITS Shutdown Margin Requirements Deleted Part~Length Control.Rods Misaligned or Inoperable Rod Regulating Group Insertion limits Shutdown. Rod Limits Low Power Physics Testtng PAGE NO 3-1
. 3-50 3-50 3-51 3-51 3-52 3-52 3-53 3-53 3.11 POWER DISTRIBUTION INSTRUMENTATION 3-56 3.11.1 lncore Detectors 3-56 3.11.2 Excore Power Distribution Monitori-ng System 3-57 Figure 3.11-1 Axial Variation Bounding Condition 3~59 3.12 3.13 3.14 3.15 MODERATOR TEMPERATURE COEFFICIENT OF REACTIVITY Deleted CONTROL ROOM VENTILATION REACTOR PRIMARY SHIELD COOLING SYSTEM 3-60 3-60 3-61 3-62 3.16 ESF SYSTEM INITIATION INSTRUMENTATION SETTINGS 3-63 Table 3.16.1 ESF System Initiation Instrument Setting Limits 3-63 83.16 Basis - ESF System Instrumentation Settings B 3.16-1 3.17 INSTRUMENTATION AND CONTROL SYSTEMS 3.17.1 Reactor Protective System Instruments Table 3.17.1 Instrument Requirements for RPS 3.17.2 Engineered Safety Features Instruments Table 3.17.2 Instrument Requirements for ESF Systems 3.17.3 Isolation Functions Instruments Table 3.17w3 Instrument Require~ents Isolation Functions 3.17.4 Accident Monitoring Instruments Table 3.17.4 Instrument Requirements for Accident Monitoring 3.17.5 Alternate Shutdowrr System Instruments Table 3.17.5 Instruments for the Alternate Shutdown System 3.17.6 Other Safety Feature In~truments Table 3.17.6 Instruments for Other Safety Features B3.17 Basis - Instrumentation Systems 3.18 Deleted 3.19 IODINE REMOVAL SYSTEM 3.20 SHOCK SUPPRESSORS (Snubbers) 3.21 Deleted 3.22 Delet~d 3.23 POWER DISTRIBUTION LIMITS 3.23.1 Linear Heat Rate 3.23.2 Radial Peaking Factors 3.23.3 Quadrant Power Tilt - Tq Table 3.23-3 Power Distribution Measurement Uncertainty ii 3-64 3-64 3-65 3-66 3-67 3-68 3-69 3-70 3-71 3-72 3-73 3-74 3-77 B 3.17-1 3.-79 3-79 3-80 3-80 3-84 3-84 3-84 3-86 3-87 3-88 Amendment No.
(
9512120026 951206
- ---~-~
PDR ADOCK 05000255 p, *~*,.,.
.,.. PDR
3.20 SHOCK SUPPREtltRs (Snubbers)
Applicability Applies to the operating status of the safety-related p1p1ng shock suppressors (snubbers).
The only snubbers excluded from this requirement are those installed on non-safety-related systems and then only if their failure or failure of the system on which they are installed would have no adverse effect on any safety-related system.
Objective To minimize the possibility of unrestrained pipe motion as might occur during an earthquake or severe transient.
Specification 3.20.l When systems associated with snubbers in Specification 3.20 are required to be OPERABLE, the snubbers in those systems shall be OPERABLE except as noted below:
- a.
With one or more snubbers inoperable, within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> replace or restore the inoperable snubbers to OPERABLE status and perform an engineering evaluation per Specification 4.16.1.c. on the supported component or declare the system inoperable.
Snubbers are required to be OPERABLE to ensure that the structural integrity of the reactor coolant system and all other safety-related systems is maintained during and following a seismic or other event initiating dynamic loads.
3.21 Deleted (Next Page is 3-84)
Amendment No. 3-, &9, -l-G-7, ~'
3-80
ATTACHMENT 2 CONSUMERS POWER COMPANY PALISADES PLANT DOCKET 50-255 TECHNICAL SPECIFICATION CHANGE REQUEST CRANE OPERATION AND MOVEMENT OF HEAVY LOADS Existing Pages Correlating Existing And Proposed Requirements 4 Pages
3.20
- SHOCK SUPPRE.RS {Snubbers)
Applicability Applies to the operating status of the safety-related p1p1ng shock suppressors (snubbers).
The only snubbers excluded from this requirement are those installed on non-safety-related systems and then only if their failure or failure of the system on which they are installed would have no adverse effect on any safety-related system.
Objective To minimize the possibility of unrestrained pipe motion as might occur during an earthquake or severe transient.
Specification 3.20.1 When systems associated with snubbers in Specification 3.20 are required to be OPERABLE, the snubbers in those systems shall be OPERABLE except as noted below:
- a.
With one or more snubbers inoperable, within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> replace or restore the inoperable snubbers to OPERABLE status and perform an engineering evaluation per Specification 4.16.1.c. on the supported component or declare the system inoperable.
Snubbers are required to be OPERABLE to ensure that the structural integrity of the reactor coolant system and all other safety-related systems is maintained during and following a seismic or other event initiating dynamic 1 oads.
Amendment No. ~' 69-, +/-97, ~
3-80
0
~.. *.1 :t;:..*t.. i.
i