ML20069D881

From kanterella
Revision as of 23:35, 7 August 2020 by StriderTol (talk | contribs) (StriderTol Bot change)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Confirms 830309 Telcon Re Proposed FSAR Figure Deletions. Figures Being Deleted Since Drawings Not Controlled & Maintained by GE
ML20069D881
Person / Time
Site: Clinton Constellation icon.png
Issue date: 03/11/1983
From: Wuller G
ILLINOIS POWER CO.
To: Schwencer A
Office of Nuclear Reactor Regulation
References
U-0612, U-612, NUDOCS 8303210048
Download: ML20069D881 (3)


Text

,. -

NM MM7 3 (03-ll)L

- 500 SOUTH 27TH STREET, P. O. BOX 511. DECATUR, ILLINO'S 62525-1805 Docket'No. 50-461 March 11, 1983 Director of Nuclear Reactor Regulation Attention: Mr. A. Schwencer, Chief Licensing Branch No. 2-Division of Licensing U.S. Nuclear Regulatory Commission Washington, D.C. 20555

Dear Mr. Schwencer:

Subj ect : Clinton Power Station Unit 1 Proposed FSAR Figure Deletions This is to confirm the telephone conversation and to provide the details requested on the subject matter as discussed with br. H. Abelson on March 9.

Illinois Power Company proposes to amend the Clinton Final Safety Analysis Report (CPS-FSAR) to remove twenty (20) outdated figures which are Instrumentation Engineering Diagrams (IED's) or Functional Control Diagrams (FCD's). These diagrams, which amount to 85 sheets of FSAR figures, are in Chapter 7 except for one figure in Chapter 8. Attached is the list of FSAR figures which we propose to delete.

All references to these IED's and FCD's in the FSAR text will be revised to reference the appropriate elementary diagrams or electrical schematics which are listed in FSAR Table 1.7-1.

These elementary and schematic diagrams are maintained updated and copies are routinely furnished to the NRC Staff as full-sized drawings in accordance with Section 1.7 of Regulatory Guide 1.70, Rev. 3.

The reason for deleting the FCD's and IED's from the FSAR is that these drawings are not controlled and maintained by the General Electric Company after the elementary diagrams (ED's) are prepared. The FCD's and IED's are used as the bases for preparation of the ED's and schematics and as such do not serve any subsequent -

design function. To keep the FCD's and IED's as FSAR figures will require considerable additional effort for drawing maintenance and control, with no apparent benefit.

v\

8303210048 030311 PDR ADOCK 03000461 A PDR

n- -

U-0612 B25-83(03-ll)6 -

March 11, 1983 Page 2 It has been our experience in working with the NRC reviewers that most of the review effort is directed at the ED's and schematics and not at the FCD's'and IED's. We believe that deletion of these JFSAR figures will not hamper the reviewers efforts or in any way detract from the review process. We kindly request your early consideration of this proposal and confirmation of concurrence before we take action to amend the FSAR.

Sincerel , ,

.:' G. E. Wu 1er '

Supervisor-Licensing Nuclear Station Engineering GEW/j mm enclosure cc: Dr. H. Abelson, NRC Clinton Project Manager Mr. H. H. Livermore, NRC Resident Inspector Illinois Department of Nuclear Safety Mr. R. A. Kendall, NRC ICSB Mr. J. J. Lazevnick, NRC PSB v

c= ' <

g

, s. o <

Attachment to U-0612-March 11, 1983 CPS-FSAR FCD/IED Figures F: -Functional' Control Diagrams Instrumentation Engineering Diagrams FSAR Figures FSMtF4 pres 7.3-10 7.2-1 7.3-11 7.3-19 7.3-13 7.6-1 7.3-16 7.6-2 7.3-18 7.6-8 7.4-2 7.6-9 7.4-4 7.7-7a 7.6-12 7.7-8 7.7-3 7.7-7 7.7-14 8.3-8 g +v-- ---'