|
|
(4 intermediate revisions by the same user not shown) |
Line 3: |
Line 3: |
| | issue date = 06/11/1996 | | | issue date = 06/11/1996 |
| | title = ISI & Testing. | | | title = ISI & Testing. |
| | author name = FITCHUK J J, WORTHINGTON K | | | author name = Fitchuk J, Worthington K |
| | author affiliation = INDIANA MICHIGAN POWER CO. (FORMERLY INDIANA & MICHIG | | | author affiliation = INDIANA MICHIGAN POWER CO. (FORMERLY INDIANA & MICHIG |
| | addressee name = | | | addressee name = |
Line 17: |
Line 17: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:JUN'.-26'6(%ED) 12:08 COOK PLANT MAINT.TEL:6164662621 P.001 Post-i6 Fax Note 7671 Oal~f p" P 3, FcQfll+/+Py+~~PhOAS I FIX I uclear Plant Safety Evaluation Screening Checklist PMP 1040.SES.001 SCREENING APPLICABLE TQ (Document Number, Rev.&CSP)Tl~: i n T tin 1.0 DESCRIPTION OF CHANGE Summary of proposed change: Reason for proposed change: Re ired b 10CFFl.55a.2.0 SAFETY EVALUATION APPUCABILITY DETERMINATION Using a continuation page or pages, the screener must include a justification for each item marked No".Documents that were used as references must be listed, Including the specific sections.The screener must likewfse provide a reason for each item marked"Yes".A statement shall be made as to why a specific section of an affected document vril need to be changed.DOES THE PROCEDURE OR MODIFICATION TO WHICH TH)S SCREENING IS APPLICABLE REPRESENT: | | {{#Wiki_filter:JUN'. -26'6(%ED) 12:08 COOK PLANT MAINT. TEL:6164662621 P. 001 Post-i6 Fax Note 7671 Oal~f p" P 3, FcQfll |
| NOTE: Refer to the procedure text as needed for full explanation of each question.Please circle the appropriate answer to each of the following questions: | | +/+ Py+~~ |
| 2.1 NO A change to the plant as described In the FSAR, Emergency Plan or Security Plan?SeePa e3.2.2 YES 0 A change to procedures as described in the FSAR, Emergency Plan or Security Plan?See Pa e3.2.3 YES NO A test or experiment not described In the FSAR?SeePa e3.PMP 1040.SES.001 Revision 1 Attachment 1 Page1 of 3 9607020i8i 960M7 PDR ADOCK 050003i5i 9.PDR TEL:6164662621 P.002 PMP 1040.SES.001 2.4 YES 0 A change to procedures, design, or a test or experiment which could affect the environment, or a change to Appendix B of the Technical Specifications (Environmental Protection Plan)?SeePa e3.25 S NO A change to the Technical Specifications or the Operating License?SeePa e3.2.6 YES (1~$7 isa Safety Evaluation requested heoause there h douhtas to whether this change affects the FSAFI, the Emergency Plan or the Security Plan (MASP)?'rovkle reason.See P e3.3.0 If the answer to ALL of the above questions is"NO", neither a Safety Evaluation or an Environmental Evaluation Is required, 4.0 If the answer to any of the Questions 2.1, 2.2, 2.3, 2.5 OR 2.6 is"YES" or if the document ls a Design Change, a Safety Evaluation MUST be performed. | | PhOAS I PMP 1040.SES.001 FIX I uclear Plant Safety Evaluation Screening Checklist SCREENING APPLICABLETQ (Document Number, Rev. & CSP) |
| 4.1 ES NO Is a Safety Evaluation required?5.0 lf the answer to Question 2.4 is"YES".then an Environmental Evaluation must be performed. | | Tl~: i n T tin |
| 5.1 YES 0 Is an Environmental Evaluation required?Screening performed by: Print Name fgn Name Review performed by: Plant En.06 11 96 Department | | |
| /Date/K~RW rnt t"ttsnl Print Name c~)90 Quallflcatlon Date Sign Nam Department | | ==1.0 DESCRIPTION== |
| /ate/QualiTication Date PMP 1040.SES.001 Revision 1 Attachment 1 Page 2 of 3' | | OF CHANGE Summary of proposed change: |
| 'JUN.'-26'6(WED) 12:09 COOK PLANT MAINT.TEL:6164662621 P.003 PMP 1040.SES.001 SAFETY EYALUATION SCREENING CONTINUATION PAGE Document Title: PMI-5070 Rev.12 2.1-Per10CFR50$ | | Reason for proposed change: Re ired b 10CFFl .55a. |
| 5a, the third Intetval update to the IST Program requires Insetvlce testing be performed to ASME OM Standards and not ASME Sectton XI as referenced ln UFSAR 5.4.4.6.2.5. | | 2.0 SAFETY EVALUATIONAPPUCABILITYDETERMINATION Using a continuation page or pages, the screener must include a justification for each item marked No". Documents that were used as references must be listed, Including the specific sections. |
| 9.35, 9.4.4, 9.5.6.R2-UFSAR 4 51.1, 4512,544, 825, 944 944,996 and QAPD 1.7125, 1.722, 1.710 were reviewed for procedures that would be changed and none were noted.There is no reference to the ISI Program in the Emergency Plan and Sectlity Plan per my discussion with Jeff Smith and Lany Smead and to the best of my knowledge. | | The screener must likewfse provide a reason for each item marked "Yes". A statement shall be made as to why a specific section of an affected document vril need to be changed. |
| 2.3-The ISI/IST Program Is described UFSAR-see 22 references. | | DOES THE PROCEDURE OR MODIFICATIONTO WHICH TH)S SCREENING IS APPLICABLE REPRESENT: |
| 2.4-There Is no environmental Impact resulting from the change of the instruction and the ISI Program is not referenced in the EP Plan per discussion with Rocky Seem and to the best of my knowledge. | | NOTE: Refer to the procedure text as needed for full explanation of each question. |
| '2.5-Tech.Spec.4.0$must be changed to reflect the new regulatory requirements on the IST Program as stated in 2.1~2.6-There is no doubt that the Third Interval IST Program update affects the UFSAFL PMP 1040.SES.001 Revision 1 Attachment 1 Page 3 of 3
| | Please circle the appropriate answer to each of the following questions: |
| | 2.1 NO A change to the plant as described In the FSAR, Emergency Plan or Security Plan? |
| | SeePa e3. |
| | 2.2 YES 0 A change to procedures as described in the FSAR, Emergency Plan or Security Plan? |
| | See Pa e3. |
| | 2.3 YES NO A test or experiment not described In the FSAR? |
| | SeePa e3. |
| | PMP 1040.SES.001 Attachment 1 Revision 1 Page1 of 3 9607020i8i 960M7 PDR ADOCK 050003i5i 9 . PDR |
| | |
| | TEL:6164662621 P. 002 PMP 1040.SES.001 2.4 YES 0 A change to procedures, design, or a test or experiment which could affect the environment, or a change to Appendix B of the Technical Specifications (Environmental Protection Plan)? |
| | SeePa e3. |
| | 25 S NO A change to the Technical Specifications or the Operating License? |
| | SeePa e3. |
| | 2.6 YES (1~$ 7 isa Safety Evaluation requested heoause there h douhtas to whether this change affects the FSAFI, the Emergency Plan or the Security Plan (MASP)? |
| | 'rovkle reason. |
| | See P e3. |
| | 3.0 Ifthe answer to ALLof the above questions is "NO", neither a Safety Evaluation or an Environmental Evaluation Is required, 4.0 Ifthe answer to any of the Questions 2.1, 2.2, 2.3, 2.5 OR 2.6 is "YES" or ifthe document ls a Design Change, a Safety Evaluation MUST be performed. |
| | 4.1 ES NO Is a Safety Evaluation required? |
| | 5.0 lfthe answer to Question 2.4 is "YES". then an Environmental Evaluation must be performed. |
| | 5.1 YES 0 Is an Environmental Evaluation required? |
| | Screening performed by: |
| | Print Name fgn Name Plant En . 06 11 96 Department / Date / Quallflcatlon Date Review performed by: K~RWrnt t"ttsnl Print Name Sign Nam c ~)90 Department / ate / QualiTication Date PMP 1040.SES.001 Attachment 1 Revision 1 Page 2 of 3' |
| | |
| | 'JUN.'-26'6(WED) 12:09 COOK PLANT MAINT. TEL:6164662621 P. 003 PMP 1040.SES.001 SAFETY EYALUATIONSCREENING CONTINUATIONPAGE Document |
| | |
| | ==Title:== |
| | PMI-5070 Rev. 12 2.1 - Per10CFR50$ 5a, the third Intetval update to the IST Program requires Insetvlce testing be performed to ASME OM Standards and not ASME Sectton XI as referenced ln UFSAR 5.4.4.6.2.5. 9.35, 9.4.4, 9.5.6. |
| | R2- UFSAR 4 51.1, 4512,544, 825, 944 944,996 and QAPD 1.7125, 1.722, 1.710 were reviewed for procedures that would be changed and none were noted. There is no reference to the ISI Program in the Emergency Plan and Sectlity Plan per my discussion with Jeff Smith and Lany Smead and to the best of my knowledge. |
| | 2.3-The ISI/IST Program Is described UFSAR - see 22 references. |
| | 2.4- There Is no environmental Impact resulting from the change of the instruction and the ISI Program is not referenced in the EP Plan per discussion with Rocky Seem and to the best of my knowledge. |
| | 2.5 - Tech. Spec. 4.0$ must be changed to reflect the new regulatory requirements on the IST Program as stated in 2.1 ~ |
| | 2.6- There is no doubt that the Third Interval IST Program update affects the UFSAFL PMP 1040.SES.001 Attachment 1 Revision 1 Page 3 of 3 |
| | |
| ~q}} | | ~q}} |
Similar Documents at Cook |
---|
Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML17335A5581999-10-12012 October 1999 Proposed Tech Specs Surveilllance Requirement 4.6.2.2.d for Spray Additive Sys to Relocate Details Associated with Acceptance Criteria & Test Parameters to Associated TS Bases ML17335A5611999-10-11011 October 1999 Proposed Tech Specs Pages,Correcting TS Pages Inadvertently Submitted in 990923 Submittal ML17335A5431999-10-0101 October 1999 Proposed Tech Specs Re Containment Recirculation Sump Water Inventory ML17326A1591999-09-23023 September 1999 Proposed Tech Specs Re Movement of SG Sections in Auxiliary Bldg for SG Replacement Project ML17326A1461999-09-17017 September 1999 Proposed Tech Specs Pages for Credit of Rod Cluster Control Assemblies for Cold Leg LBLOCA Subcriticality ML17326A1181999-09-10010 September 1999 Proposed Tech Specs Pages,Revising TS Surveillance Requirement 4.4.7,TS Tables 4.4-3,3.4-1 & TS Surveillance Requirement 4.11.2.2 Re RCS & Gas Storage Tank Sampling ML17326A0941999-08-17017 August 1999 Proposed Tech Specs,Removing voltage-based Repair Criteria, F* Repair Criteria & Sleeving Methodologies from Unit 1 TS & Clarifying Bases Section ML17326A1471999-05-28028 May 1999 Non-proprietary Version of Control Rod Insertion Following Cold Leg LBLOCA at DC Cook,Units 1 & 2. ML17325B6061999-05-21021 May 1999 Proposed Tech Specs Revising Limitations on Positive Reactivity Additions ML17325B5891999-05-0707 May 1999 Rev 5 to PMP 7200.RST.004, Expanded Sys Readiness Review Program. ML17325B5901999-05-0707 May 1999 Rev 1 to PMP 7200.RST.006, Expanded Sys Readiness Review Program for Level 2 Sys. ML17325B5551999-04-19019 April 1999 Proposed Tech Specs 3/4.8.1.2, Electrical Power Systems & Associated Bases,Providing one-time Extension of 18-month Surveillance Interval for Specific SRs ML17325B4671999-03-0303 March 1999 Rev 5 to Cook Nuclear Plant Restart Plan. ML17335A3581998-12-0303 December 1998 Proposed Tech Specs 4.6.5.1, Ice Condenser,Ice Bed & Associated Bases,Reflecting Max Ice Condenser Flow Channel Blockage Assumed in Accident Analyses ML17335A3681998-12-0303 December 1998 Proposed Tech Specs,Adding New TS Re Distributed Ignition Sys ML17335A3651998-12-0303 December 1998 Proposed Tech Specs 3/4.7.7, Sealed Source Contamination & Associated Bases Addressing Revised Testing Requirements for Fission Detectors ML17335A3621998-12-0303 December 1998 Proposed Tech Specs Removing Obsolete Info to Provide Consistency Between Units 1 & 2 to Provide Consistency with Std Tech Specs,To Provide Clarification & to Correct Typos ML17325B4431998-11-0202 November 1998 Rev 4 to Cook Nuclear Plant Restart Plan. with 981216 Ltr ML17335A4071998-11-0202 November 1998 Rev 4 to Cook Nuclear Plant Restart Plan. ML17335A2781998-10-0808 October 1998 Proposed Tech Specs Sections 3.3.3.8 & 3.3.3.6,placing Tighter Restrictions on Amount of Time RWST Water Level Instrumentation Can Be Out of Svc Before Compensatory Actions Are Required ML17335A2691998-10-0808 October 1998 Proposed Tech Specs 3.4.1.3 Re Reactor Coolant Loop Requirements in Modes 4 & 5 ML17335A2651998-10-0808 October 1998 Proposed Tech Specs Changing Containment Sys TS Bases 3/4.6.1.4, Internal Pressure & 3/4.6.1.5, Air Temp. ML17335A2341998-09-14014 September 1998 Proposed Tech Specs Page 3/4 5-6,revising Runout Limits for SI Pump to 675 Gpm Unless Pump Is Specifically Tested to Higher Flow Rate Not Exceeding 700 Gpm ML17335A2301998-09-12012 September 1998 Rev 3 to Cook Nuclear Plant Restart Plan. ML17335A2721998-09-0404 September 1998 Rev 0 to PL-CNSI-98-007, Transportation & Emergency Response Plan for DC Cook Unit 2 SG Project. ML17335A2751998-09-0202 September 1998 Rev 1 to ER-98-012, Evaluation of Dose Rate from U-Tube End of DC Cook SG Lower Assembly. ML17335A1931998-08-28028 August 1998 Proposed Tech Specs Requesting Extension of SG Surveillance TS 4.4.5.3,which TSs Require to Be Performed on 990408,until End of Current Fuel Cycle Currently Scheduled for Mar 2000 ML17335A2731998-08-21021 August 1998 Rev 0 to ST-307, Structural Evaluation of DC Cook Unit 2 Sgla Package. ML17334A7301998-05-0606 May 1998 Rev 2 of Cook Nuclear Plant Restart Plan. ML17325B5271998-04-0707 April 1998 Rev 1 to Cook Nuclear Plant Restart Plan. ML17334B8041998-04-0303 April 1998 Rev 1 to Valve IST Program for DCP Third 10-Yr Interval. ML17325B5261998-03-0707 March 1998 Rev 0 to Cook Nuclear Plant Restart Plan. ML17334B7031998-03-0303 March 1998 Proposed Tech Specs Pages,Removing Word Immediately from Unit 1 Hydrogen Recombiner Surveillance Requirement 4.6.4.2.b.4 & Revising Unit 1 & 2 TS 3/4.6.4 Bases ML20212A7051997-10-21021 October 1997 Proposed Tech Specs 3/4.6.5 Re Ice Weight & Surveillance Requirement ML17333B0751997-10-0808 October 1997 Proposed Tech Specs 3/4.6.5 & 3/4.5.5 Re Ice Weight & SR ML17333B0451997-09-19019 September 1997 Proposed Tech Specs,Deleting Requirement for Automatic Valve Closure Feature on RHR Sys Suction from RCS ML17333A9891997-08-11011 August 1997 Proposed Tech Specs,Reflecting Changes for Moderator Temp Coefficient Measurement in Response to RAI ML17333A9851997-08-11011 August 1997 Proposed Tech Specs,Allowing Filling of ECCS Accumulators W/O Declaring ECCS Equipment Inoperable ML17335A2121997-08-0101 August 1997 Proposed Tech Specs 4.7.1.2.g Deleting Wording When Secondary Steam Supply Pressure Is Greater than 310 Psig. ML17333A8301997-03-26026 March 1997 Proposed Tech Specs Modifying TS 4.7.5.1.e.2 Which Describes Control Room Ventilation Sys Autostart Functions ML17333A8331997-03-26026 March 1997 Proposed Tech Specs Involving Grammatical Correction to Wording of Unit 2 TS 3.4.8,Action a for Modes 1,2 & 3 & Returning Frequency Requirement to TS 4.7.1.2.c & 4.7.1.2.d That Was Inadvertently Deleted in Prior Amend ML17333A8261997-03-26026 March 1997 Proposed Tech Specs Removing Administrative Controls Related to Quality Assurance Requirements IAW Guidance of Administrative Ltr 95-06 ML20135C3781997-02-24024 February 1997 Revised Proposed Tech Specs Page Re 3/4, Limiting Condition for Operation & Surveillance Requirements ML17333A7161996-12-20020 December 1996 Proposed Tech Specs Change to Allow for Repair of Hybrid Sleeved SG Tubes in Response to RAI ML17333A7151996-12-20020 December 1996 Proposed Tech Specs 3/4.4.10 Re Reactor Coolant Sys ML17333A5161996-07-22022 July 1996 Proposed Tech Specs,Informing Operations Superintendent Will Have to Hold SRO License,Have Held Senior Operator License or Been Certified to Have Senior Operator Knowledge ML17334B5951996-07-11011 July 1996 Proposed Tech Specs,Supporting Operation of Facility at Increased Core Rated Thermal Power of 3,588 Mwt ML17333A4771996-06-19019 June 1996 Proposed Tech Specs Re Voltage Based Repair Criteria for Repair of Westinghouse SG Tubes Affected by Outside Diameter Stress Corrosion Cracking,Per GL 95-05 ML17333A4841996-06-11011 June 1996 ISI & Testing. ML17333A4651996-06-11011 June 1996 Proposed Tech Specs Re Administrative Controls Related to QA 1999-09-23
[Table view] Category:TEST/INSPECTION/OPERATING PROCEDURES
MONTHYEARML17325B5901999-05-0707 May 1999 Rev 1 to PMP 7200.RST.006, Expanded Sys Readiness Review Program for Level 2 Sys. ML17325B5891999-05-0707 May 1999 Rev 5 to PMP 7200.RST.004, Expanded Sys Readiness Review Program. ML17325B4671999-03-0303 March 1999 Rev 5 to Cook Nuclear Plant Restart Plan. ML17335A4071998-11-0202 November 1998 Rev 4 to Cook Nuclear Plant Restart Plan. ML17325B4431998-11-0202 November 1998 Rev 4 to Cook Nuclear Plant Restart Plan. with 981216 Ltr ML17335A2301998-09-12012 September 1998 Rev 3 to Cook Nuclear Plant Restart Plan. ML17335A2721998-09-0404 September 1998 Rev 0 to PL-CNSI-98-007, Transportation & Emergency Response Plan for DC Cook Unit 2 SG Project. ML17335A2751998-09-0202 September 1998 Rev 1 to ER-98-012, Evaluation of Dose Rate from U-Tube End of DC Cook SG Lower Assembly. ML17335A2731998-08-21021 August 1998 Rev 0 to ST-307, Structural Evaluation of DC Cook Unit 2 Sgla Package. ML17334A7301998-05-0606 May 1998 Rev 2 of Cook Nuclear Plant Restart Plan. ML17325B5271998-04-0707 April 1998 Rev 1 to Cook Nuclear Plant Restart Plan. ML17334B8041998-04-0303 April 1998 Rev 1 to Valve IST Program for DCP Third 10-Yr Interval. ML17325B5261998-03-0707 March 1998 Rev 0 to Cook Nuclear Plant Restart Plan. ML17333A4841996-06-11011 June 1996 ISI & Testing. ML17333A4701996-02-0808 February 1996 In-Service Pump Test Plan, Units 1 & 2 ML17334B5661995-11-30030 November 1995 Vols I & II of Third 10-Yr Interval Long-Term Inservice Exam Plan for Class,1,2 & 3 Sys & Components for DC Cook Nuclear Plant,Unit 1, Final Plan ML17334B5671995-11-30030 November 1995 Vols I & II of Third 10-Yr Interval Long-Term Inservice Exam Plan for Class 1,2 & 3 Sys & Components for DC Cook Nuclear Plant,Unit 2, Final Plan ML17332A2521994-08-0303 August 1994 Rev 3 to Plant Manager Procedure (PMP) 12 PMP 3150 PCP.100, Radwaste Pcp. ML17332A2491994-08-0303 August 1994 Rev 7 to Plant Manager Procedure (PMP) 12 PMP 6010 OSD.001, Odcm. ML20063K0631994-02-11011 February 1994 Change Sheet 1 to Rev 5 to Plant Manager Procedure (PMP) 12 PMP 6010 RPP.304, Use of HEPA Vacuum Cleaners. W/ Updated Index,Page 14 ML17331B0441993-11-0909 November 1993 Rev 15 to Emergency Response Manual. W/931109 Ltr ML17334B4851993-08-0909 August 1993 Rev 14 to Emergency Response Manual. W/930809 Ltr ML17334B4821993-04-0202 April 1993 Rev 3 of Pump Inservice Test Program. ML17329A5431992-06-11011 June 1992 Change Sheet 7 to Rev 6 to Procedure PMP 2080 EPP.107, Notification of Plant Personnel. ML20077S7281991-03-14014 March 1991 Rev 3 to PMP 6010.OSD.001, Odcm ML17325B3791990-03-0101 March 1990 Change Sheet 1 to Rev 3 to Procedure PMP 2080 EPP.106, Initial Offsite Notification. ML17334B3551990-02-0505 February 1990 Rev 2 to DC Cook Nuclear Plant Units 1 & 2 Inservice Testing Pump Program. ML17334B3561990-02-0505 February 1990 Rev 3 to DC Cook Nuclear Plant Unit 2 Inservice Testing Valve Program. ML17334B3571990-02-0505 February 1990 Rev 3 to DC Cook Nuclear Plant Unit 1 Inservice Testing Valve Program. ML20246M2191989-03-21021 March 1989 Procedure MS-3.2.1.9-1B, Maint & Surveillance Ite Medium Voltage Switchgear Equipment ML17325B0511988-12-0909 December 1988 Interim Acceptance Criteria for Safety-Related Piping Sys. ML17334B1491987-10-0505 October 1987 Rev 2 to DC Cook Nuclear Plant Unit 1 Inservice Testing Valve Program. ML17334B1501987-10-0505 October 1987 Rev 2 to DC Cook Nuclear Plant Unit 2 Inservice Testing Valve Program. ML20212A3191986-10-0202 October 1986 Rev 1 to Procedure 12 PMP 4021 TRP.001, Reactor Trip Review ML17324A9301986-05-29029 May 1986 Rev 0 to Procedure 1MHP2140.082.001, Maint Procedure for Repowering RHR Pump. ML17324A9321986-05-29029 May 1986 Rev 0 to Procedure 1MHP2140.082.003, Maint Procedure for Repowering Pressurizer Backup Heaters. ML17324A9331986-05-29029 May 1986 Rev 0 to Procedure 1MHP2140.082.005, Maint Procedure for Repowering Containment Valves. ML17324A9341986-05-29029 May 1986 Rev 0 to Procedure 1 Thp 6030 IMP.304, Pressurizer PORV Cable Repair. ML17324A9351986-05-29029 May 1986 Rev 0 to Procedure 1 Thp 6030 IMP.305, App R Post-Fire Repowering of In-Containment Valves. ML17334A9711986-05-22022 May 1986 Rev 0 to Procedure 12-OHP 4023.100.001, Unit 1 Emergency Remote Shutdown. ML20213F6011986-05-15015 May 1986 Rev 1 to Procedure PMP 6010.OSD.001, Offsite Dose Calculation Manual ML17324A9001986-05-0101 May 1986 Rev 1 to Procedures Generation Package,Part Iv,Training for Donald C Cook Nuclear Plant Emergency Operating Procedures. ML17324A8991986-05-0101 May 1986 Rev 1 to Procedures Generation Package,Part Ii,Writers Guide for Donald C Cook Nuclear Plant Emergency Operating Procedures. ML17324A8971986-05-0101 May 1986 Rev 1 to Procedures Generation Package,Part I,Specific Technical Guidelines for Donald C Cook Nuclear Plant. ML18005A0161986-05-0101 May 1986 Rev 1 to Procedures Generation Package,Part III, Verification/Validation for Donald C Cook Nuclear Plant Emergency Operating Procedures. ML20195C5361986-03-15015 March 1986 Public Version of Emergency Response Manual for DC Cook Nuclear Plant ML20141D7121986-02-28028 February 1986 Rev 0 to Master Insp Plan ML20137J6061985-12-17017 December 1985 Public Version of Revised Emergency Plan Implementing Procedures,Including Rev 2 to Erp 2.07, Outside Agency Liaison, Rev 1 to Erp 2.08, Initial Assessment Group Runner & Rev 2 to Erp 5.01.W/860117 Release Memo ML17334A9441985-11-0505 November 1985 Change Sheet 1 of Rev 9 to Spec DCCFP101QCN, Matl & Application Spec - Initial & Repair Installations, Revising App D Silicon Foam Scope of Work to Identify New Fire Barriers & for Cross Referencing Fire Zones ML17334A9191985-10-15015 October 1985 Implementation Plan of Reg Guide 1.97,Rev 3 for Donald C Cook Nuclear Plant Units 1 & 2, Status Rept 1999-05-07
[Table view] |
Text
JUN'. -26'6(%ED) 12:08 COOK PLANT MAINT. TEL:6164662621 P. 001 Post-i6 Fax Note 7671 Oal~f p" P 3, FcQfll
+/+ Py+~~
PhOAS I PMP 1040.SES.001 FIX I uclear Plant Safety Evaluation Screening Checklist SCREENING APPLICABLETQ (Document Number, Rev. & CSP)
Tl~: i n T tin
1.0 DESCRIPTION
OF CHANGE Summary of proposed change:
Reason for proposed change: Re ired b 10CFFl .55a.
2.0 SAFETY EVALUATIONAPPUCABILITYDETERMINATION Using a continuation page or pages, the screener must include a justification for each item marked No". Documents that were used as references must be listed, Including the specific sections.
The screener must likewfse provide a reason for each item marked "Yes". A statement shall be made as to why a specific section of an affected document vril need to be changed.
DOES THE PROCEDURE OR MODIFICATIONTO WHICH TH)S SCREENING IS APPLICABLE REPRESENT:
NOTE: Refer to the procedure text as needed for full explanation of each question.
Please circle the appropriate answer to each of the following questions:
2.1 NO A change to the plant as described In the FSAR, Emergency Plan or Security Plan?
SeePa e3.
2.2 YES 0 A change to procedures as described in the FSAR, Emergency Plan or Security Plan?
See Pa e3.
2.3 YES NO A test or experiment not described In the FSAR?
SeePa e3.
PMP 1040.SES.001 Attachment 1 Revision 1 Page1 of 3 9607020i8i 960M7 PDR ADOCK 050003i5i 9 . PDR
TEL:6164662621 P. 002 PMP 1040.SES.001 2.4 YES 0 A change to procedures, design, or a test or experiment which could affect the environment, or a change to Appendix B of the Technical Specifications (Environmental Protection Plan)?
SeePa e3.
25 S NO A change to the Technical Specifications or the Operating License?
SeePa e3.
2.6 YES (1~$ 7 isa Safety Evaluation requested heoause there h douhtas to whether this change affects the FSAFI, the Emergency Plan or the Security Plan (MASP)?
'rovkle reason.
See P e3.
3.0 Ifthe answer to ALLof the above questions is "NO", neither a Safety Evaluation or an Environmental Evaluation Is required, 4.0 Ifthe answer to any of the Questions 2.1, 2.2, 2.3, 2.5 OR 2.6 is "YES" or ifthe document ls a Design Change, a Safety Evaluation MUST be performed.
4.1 ES NO Is a Safety Evaluation required?
5.0 lfthe answer to Question 2.4 is "YES". then an Environmental Evaluation must be performed.
5.1 YES 0 Is an Environmental Evaluation required?
Screening performed by:
Print Name fgn Name Plant En . 06 11 96 Department / Date / Quallflcatlon Date Review performed by: K~RWrnt t"ttsnl Print Name Sign Nam c ~)90 Department / ate / QualiTication Date PMP 1040.SES.001 Attachment 1 Revision 1 Page 2 of 3'
'JUN.'-26'6(WED) 12:09 COOK PLANT MAINT. TEL:6164662621 P. 003 PMP 1040.SES.001 SAFETY EYALUATIONSCREENING CONTINUATIONPAGE Document
Title:
PMI-5070 Rev. 12 2.1 - Per10CFR50$ 5a, the third Intetval update to the IST Program requires Insetvlce testing be performed to ASME OM Standards and not ASME Sectton XI as referenced ln UFSAR 5.4.4.6.2.5. 9.35, 9.4.4, 9.5.6.
R2- UFSAR 4 51.1, 4512,544, 825, 944 944,996 and QAPD 1.7125, 1.722, 1.710 were reviewed for procedures that would be changed and none were noted. There is no reference to the ISI Program in the Emergency Plan and Sectlity Plan per my discussion with Jeff Smith and Lany Smead and to the best of my knowledge.
2.3-The ISI/IST Program Is described UFSAR - see 22 references.
2.4- There Is no environmental Impact resulting from the change of the instruction and the ISI Program is not referenced in the EP Plan per discussion with Rocky Seem and to the best of my knowledge.
2.5 - Tech. Spec. 4.0$ must be changed to reflect the new regulatory requirements on the IST Program as stated in 2.1 ~
2.6- There is no doubt that the Third Interval IST Program update affects the UFSAFL PMP 1040.SES.001 Attachment 1 Revision 1 Page 3 of 3
~q