ML19318C086: Difference between revisions
StriderTol (talk | contribs) (StriderTol Bot change) |
StriderTol (talk | contribs) (StriderTol Bot change) |
||
Line 386: | Line 386: | ||
,/ / a. Continuout seal wcld bett cen nembers 'of frcme and between frama _- | ,/ / a. Continuout seal wcld bett cen nembers 'of frcme and between frama _- | ||
'and housing. . , | 'and housing. . , | ||
- | -((- | ||
M /; .. / / b. S tructural rigidity. - | M /; .. / / b. S tructural rigidity. - | ||
I"'' '/ / c. Squareness of medoers, flatness and condition of component seating | I"'' '/ / c. Squareness of medoers, flatness and condition of component seating |
Latest revision as of 17:25, 27 February 2020
ML19318C086 | |
Person / Time | |
---|---|
Site: | Palisades |
Issue date: | 03/11/1975 |
From: | CONSUMERS ENERGY CO. (FORMERLY CONSUMERS POWER CO.) |
To: | |
Shared Package | |
ML18045A283 | List: |
References | |
NCS-375, NUDOCS 8006300530 | |
Download: ML19318C086 (12) | |
Text
-. .
- - p%
\.- s.. g - . . .
, , s j-
- ;- 0,'.
q-e -
- PROCEDURE , -
ij t *
- FOR
- 2. ,
f,.*
w IN PLACE TESTING OF HEPA FILTERS .
1 4
{ .
AND IODINE AD30RBERS ' '
-NCS-375 *
.e -
- p. < ~
. ;u
- g. , .
MARCH 11, 1975
~
2 '
_ . .a, ,.
9 ** , s., V .,' > a
- s. v - -d, , ..
-q . . . ,- r Q , ,. > , ;k , . .
3 .-
. - 1 :
~ .. ., . .y
, n ,. o 3 3.. ,
.~ , , .
,- ,u>
. ,, c .o ,,
n ,-
i g., , '6* ,
c'
- gj j 1, -
y- .' a 5, U u .
7 ,
v r .
TV i- '
NUCLEAR CONTAINMENT SYSTEMS, INC.
~
.. COLUMBUS, 01110 43219 REVIEWED BY ~/' .-/t IN-PLACE TESTING -
7 ,
'f El'FECTIVE DATE 3121/75 d,. ,
APPROVED BY h Y g e,t. J REVISION NO.t 8/22/75 I
, - , - j l
.i .~
2; . , , - , . :.-
-~
w.~ . e :., .. <
s >
?
e
'~
. . ;. .g .,.
,7
,",T.'g.'..,.,
9 . +
+. , ,
- v, '
- - w; 3 -:,e 7% ,
_ . _j .
sy .. .
. a .-
j;:;t:. .* .
f?j. h , ;:: "
.' 7
~ '. .
-:: ,: ~ -
p, _
O.
-Q s,1 '
. S .., NUCI. EAR COMTAIMIENT SYSTEMS, INC.
' . ' - +' P.O. BOX 19827 - COLUMBUS, 01110 43219 4 (614) 252-1420 g.c l s .
~
CONTR03ED COW.
ea
- 1. *. 3.e '
c d O %.. ' . , ~
,.~ 4 v. _g
- fwc '
w a.-
~8006_800($3C _ _ .-.
.- . . - . . - - . . . . .~ . - - . .
e, R v. 3 -
s . et y ? .. . '
.S.
SCOPE
- 1. 0 This procedure covers the in-placing testing of the liigh Ef ficiency '
Particulate Air (llE?A) filters and Iodine Adsorber filters. . .
s STANDARD ,
r, -
- 2. 0 This procedure complies with ORN(,-NSIC-65, " Design, Cons t ruc tion,.
> and Testing of IIish-Ef ficiency Air Filtration Systems for Nuclear
- Applications" and ANSI N510, " Testing of Nuclear Air C1 caning '
, .G.
Systems", and in accord with ANSI 101/1 and Regulatory Guide 1.52.
[. Q, .
VISUAL INSPECTION A' - ..a .
3.1 A visual inspection of the components or subsystems to be tested,.
\_. their holding devices, gaskets, housing, and all components shall
{ ,s cy , he made before any leak test. - ,-
,ld ;
Y
- 3. 2 Complete a visual report, NCS Form No. 1 attached to this NCS-375 ,.
pr,ocedure, page 6.
- 7. Y
..t
- ' i E .
- 3. .. ,
G(<
- u,
- .1/ -: - ,
1py?: , ,
.Je, ;< - '..
5 ig u.m #
I. .
+. C;?; -
. - -- y
~t < .
_ y;t y .,.,. ,_ , '
~
M i; 5;$ f i
%M: e P , ] , ,
z }, g ..
..,.gi .
O
}f C2
'4., :,
j .'3[- )$
g, n .
, 'vn u .
o l1
- v
- I l l, ~
\
ef'*
j bVC;M ?+0',;/.
e
.Y ,, +
._,,,,,,e., _
y--
~
- , + - - - - , ,
r ., ,, - -: - . '
i .m..' ~ 12) .NCS-375 .m
^Rev.1 i
EQUIPMENT & SYSTEM TESTS
.4.1 Testing of IIEPA Filter Banks.
Perform the following steps on the high efficiency filter systems listed below and attach a completed test report for each filter .m -
system to this procedure. ,
4.1.1 ~ Establish ai[ flow through the' filter being tested. Measure and .
record the resistance across the filter bank. .
4.1.2 Connect the penetrometer sampling line to upstream sampling port .
and calibrate it against its built-in standard in accordance with t,he manufacturer's instruction.
2~ '
4.1.3 For an' acceptance test of a new system, check the background dust concentration upstream and dounstream of the filters; the bdck-
[
- ground dust concentration shall be Icss than 257. of the expected aerosol concentration during the test. .r -
A r.
4.1.4 Connect' the DOP generator to the injection port.
1 Start the injec- -
tion and adjust the generator as necessary.
T
) 4.1.5 . Connect the penetrometer to the upstream sample point, allow it to stabilize, and adjust it to read 507. or higher on the lowest sen-sitivity . scale, readjusting the DOP generator as necessary. Record 7
the upstream reading. It may prove in larger systems a lower or 1f i
s
'different scale reading is necessary to establish an upstream reading.
T. 4.1.6 Connect the sampling line to the douastream sampic point, allow 1%. the photometer to stabilize, and record the downstream reading. ,
$ ~
l Nb . 4.1.7 Repeat steps 5 and 6 and record the new readings if different. 'If if significant dif ferences occur, recheck until the readings remain ' +
constant within about +57.. Use the final constant readings for cal-
- s -
culating the Icakasc. -
M.
n y
4.1.8 Calculate the leakage from the equation: ~' K 1 (f-4 l
& 7. Leahage where L = 100 Cd '
?: U '
NJ O% .. u t ta 4. ;'ve. ant Icahage 5 N DE bdhf. kf7; /? ?.'Odm - dounstream cunpentration; from photometer reading j
if ntrati n; fr m ph t meter reading CC up e lw 4.1.9 If the Icah'a'ge'-in-3cca.ter than t to specified value of Section 5.0,
.U'- scan the downstream faceTEirc ank as follous:
- a. Connect a sampic line to downstream sampic port and adjust the
, . .g penetrometer to zero uhen set to the most sensitive scale, y^
N" - b. ' Disconnect .the sampic line from the downstream sample port and
- attach a scanning probe. Traverse the downstream side of bank l .j..x.- ,'at a rate of about 10ft/ min. with the probe held about 1 to 1 1/2
~
- (f ~
n - . .
y7 , rQ
.w= . .
. C01.1. av:- ,
1.: a * . . ; ,. . ,. .
a inches from the section to be checked. It is reco.wacnded that the seal between the counting frame and the housing be scanned '
first; then the peripheries of the individual filters, and .
finally the cores of the individual filters. .
- c. A Icak is indicated by a sustained and reporducible deficction of the meter needic uhen the probe is held at the point in question .
on one scale division or more. .
- d. Mark the indicated Icaks. - Af tpr necessary repairs or filter .
replacemen,t, rctest the system in accordance with Steps 1 thru 8. .
4.1.10 If the llEPA filter system contains more that one bank of filters, each bank must be tested individually. Complete a separate test report for t.
'. each bank. ,- ~ .
- 4.1.11 Close system after testing. ' .
- a. Disconnect all sample lines.
, . ._ ,q-
. ~
.t
- b. Seal all injection and sample ports. .
'} c. ' Notify designated plant personnel that test is completed and system '
~
may be put in normal operation.
?
! 4.1.12 Complete a t'est report, for each HEPA bank on NCS Form No. 2, attached .
- to this procedure page 7. -
4 l '
- g. ,
d e
4 c
y,
, ,I.
- ..m . g ,
- '~e e,
.:., y -
R$(; *' '
e . s : 1
- s. -, .
W.; h s
' IM.
- i N s *
, h*]' "._ _ '
l=' -
,[ [f v s
'{ , '
- h. ~
' ' 4.-.?.f;; -7 ..N,%.. .
m MS di(m') ;;%'N.?,
. . , ,, -'s ,'s.
d" '.' -
$~$ ,q %y p,,\% % ,
, : "i1 * - V,..- s y.
', ; .d,
, ,'r[ ( m_/*Ah
%-i h'.*.
w
, h
- g.n ,, =. y sx J' "
in O'! i I '*-" A NQ. '
yifi \.L<J. '
- i*? .~> ,
q =% - .
- ?.T ,
_,a __
y~J~ .
i . Rev. 1
- +. .- ,
.,p*. *
- '4. 2 Testing of Iodine Adsorber Banks ,
Perform the following steps on each iodine adsorber bank listed' below and attach a completed test report for each, bank to this i procedure.
4.2.1 Each iodine adsorber shall be inspected individually for any -
[ visibic damage prior to testing.
~;
- 4.2.2 Establish air flow through the bank.
T l 4.2.3 Conhect the sample lines to upstream and downstream sample points, establish detcetor operating conditions used in their calibration, establish . upstream dilution-air rat o to produce an upstream con-centration at the tracer gas detector which is within the linear
)J response range.
4.2.4 Take upstrena background samples and downstream background sampics ,
{g ,(5 minimum for noncontinuous detectors). If these show no back- .
ground contaminants that might interfere with the test results,
- continue with the test. If downstream interference;is too great to .
1 obtain a base line, purge the bank at rated system air flow for 8
^ ~
to 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />, or change tracer gas.
! 4.2.5 Estimate the tracer gas transit time from the generator on through ,
, i the injection port and system to the detector. Start the injection and after the estimated transit time, monitor the upstream concen-7 tration. The time when the initial tracer gas is detected is des-j ignated as time zero tracer gas R-11.
.-* 4.2.6 Calculate the Icakage for cach time interval from the equation:
% Leakage Where L = 100 gd_
' with L = % Icakage Cu r- "
5 Y ~
Cd = Downstream concentration I Cu = Upstream concentration W' Plot penetration vs. time and extrapolate curve to time zero. . . .
3, . ~
If the leakage obtained from step 6 is greater than the value
[. 4.2.7 specified in section 5.0 of this procedure, locate and repair any ,
,. Icaks, then retest. _
+ t s:, .,-
~'
l L4.2.8 Close system after testing. . .
~ [J '
, a. Disconnect all sampic lines.
.i? .
'l b. Scal all injection and sampic ports.
1,N c. Notify designated plant personnel that tent is completed and -
- system may be put in normal operatLon.
4 -
- 4.2.9 Conplete a test report for cach adsorber bank, on NCS Form ho. 3,
(/ attached to this procedure, page 8. '
.A -
, q. -.
_ ,;;ye ;..
CONTR0!.gD COP 1. ;
[. .
Rev.1 ._
ACCEPTANCE CRITERIA 5.1 Each IIEPA filter bank, except for those specified in step 5.3, shall have a miximum Icakage of 0.057. (cf ficiency of 99.957.) or as specified by the Contractor, based on the actual number of ,particules that pen-ctrate the filter when using the polydisperse acrosol, gen'erated from a liquid DOP having a particle diameter of 0.75 + 0.50 micron. ,
5.2 Each iodine adsorber bank si'all have an in-place maximum leakage of 1.07. (ef ficiency of 99.0%), or #a s specified by the Co tractor, based on the differential zero time concentration of the upstream and down-
. stream sampics. It is understood that the test shous only acchanical i- Icak and does not- represent actual clemental iodine of methyl iodide ,
removal efficiency. , ,
f i
-5. 3 The Sample Rack filters and Fume Hood filters shall have a masimum Icakage of 57. (efficiency of 95%) as specified by the DOP test in
. Step 4.1.
~
- 1. -
T -
4 y * .
.f Y
- h 1 ,
I f}
- g . r
-1 y ..
1
. .e 1
- f.
}, '
- - s ~ 4 -l 4
s
, ;I
[ -
Cova ~4 J~9 .~"
it ,
- i. ]
r ~ . - _ _ _ . . _ ,,
n + -- ..: _ ,
Rav.1 -
~. .
(- ,
NCS FORM NO. 1 Rev. O
~
VISUAL INSPECTION OF FILTER SYSTEM .
CUSTOMER Purchase Order No.
J
. LOCATION -
SYSTEM
~
~
' ' NUMBER OF FILTERS .
i - -
< _ 4 FLOW
'. FILTER TYPE 8
. DATE OF INSPECTION .
i *
! INSPECTED BY ,
1 NUCLEAR CONTAINMENT SYSTEMS, Ii;CORPORATED
', y -
DATE ,
- :y _
g _. . : ~.
- i;'V - -
' CHECK LIST FOR VISUAL. INSPECTION ,
I;p7 ' Mounting Frames '
~
g:r,;+ .
,/ / a. Continuout seal wcld bett cen nembers 'of frcme and between frama _-
'and housing. . ,
-((-
M /; .. / / b. S tructural rigidity. -
I" '/ / c. Squareness of medoers, flatness and condition of component seating
, , ,f4 surfaces.
- / / 'd. Damage to frames.
Filter Clamping Devices or_I!oltq
,_ '/_/ a. Proper adjust = cat (30 to 807, gasket compression all around)
- .l (tighten if less). ,
j
, kb A gh j ,
' @vu
_ (U$'d a $U h _
L _ :- -
m
,. + ..-
Rev.,1- .
2 . . .
/ / . b. Suf ficient number of adequate size to produce 50 to 807. .
gasket compression.
~
/ / c. Individual clamping of filter (adsorber) cells.
/ / d. Proper condition of clamping devices (eg., .all nuts in place and tighteneC.n ~
/ / e. Adequate cicarances between filter (adsorber) cicmonts to tighten clamping devices op all sides.
/ / f. Full penetration and freedom from cracks in ucids of clamping .
devices. . .
. HEPA Filters .
i .
- . . ^
f11'ter media (tears, cracks etc. - some damage to
/ / a. Damage tt separ- ; prs is permissible), case, case corners, on both - N face's '
j of filters. ~
i -
/ / b. Damage to or linpre; '- -S t-ing of gaskets. ,
' Burns of media or case from cutting or, welding on both faces l / / c.
. of filters. ,
t
/ / d. Exces'sive dirt loading (check gage shouing pressure drop across
)
filters). .
Prefilters
! , / / a. Damage to media, case, or gaskets.
t .
^
/ / b. Excessive dirt loading.
~
4 - -
- kg.g . A Adsorbers ' -
w.
v..
v..
( .:ft \ _
+
- v {. .m/ ; ,. n. Damage to cells, includLng burn.3 from welding or cutting opera- -
3
- i. tions in housing.
p(:a ' b, .. '"
1 , .
/'*;,/ . b .3 Individual clamping. '
N . ' .s \
/'ceb Condition of clamping devices. .
c.
./ \ . $F,. ,.Co,n .; ition of gaskets. .
.g
=g g Ld3htligh \
w..s s J/ / a. ti quift ,{op visual inspection of hou:ing nad cor.poacnts.
'.'_ / / b. All je' s lit (replace if out). j
~
CONM03.ED COF5 .
R0v. 1 - *
~e. > . .
s
/ '/ c. Penetration of mounting frame by power or control conduits.
/ / d, Vapor-tight globe, guard to protect globe from physical damage.
.x Housing .
, / / .t . Adequate ' space for personnel and equipment for maintenance, .
testing.
$' / / b. Reasonabic access to housidg.
/ / c. Space adjacent to housing amenable to isolation as a contan-ination zone, adequate space for temporary storage of clean p{ ,
.and contaminated filters during filter change. -
- d. Doors of rigid construction with adequate seal between door
}~' ./ /
and casing; doors opening outward on negative-pressure housings.
A I / ./ e. . Adequate latches on doors, with provision for opening from -
1 inside and outside of housing and provision for locking.
Adequate sills. '
z- Adequate structural rigidity to resist undue ficxure - rein-f / / f.
forcing members on ou. side, preferably.
n
/ / g. Acces's to upper tiers with permanent service platform at approx-lla imately the 6-foot Icyc1 - adequate, permanently installed , ,
. ladders.
?
'I / / 'h. Adequate cicarances between banks of components, with door on each side of each bank. .
T
/ / i. No back-to-back banks of. components. .
- } .
.. F / / j. Proper location of tracer injection and sample ports, k / / k. Adequate guards on fans located inside of housing. -
- r. .
- - ilousekacping in and around housing.
./ L/ 1. ~
/ / m. Condition of flexibic connection between housing.and fan external
=- to housing.
4
/ / n. Fan-shaft seal.
[~ / / o. Accquate dampers to prevent intake of air from adjacent housing 4
.or pienen during test, and to prevent bypassing of systca. ,
/ / p. Freedom from corridors, plenums, conduits, cicctrical, connections, plumbing, drains or other conditions that could result in bypassing
( *
, of the system, cany of which are not immediately apparent.
.. lk.
h
{ .x -
[h t. .
a
. .- .+
g a., , LRev.1 . .
-Dampers
/ / a. Damage to or distortion of frame or. blades.
(
/ / b'. . Bent pivot pins, operator.
/ / c. Missing seats ox-blado edging. l
/ /. d. Condition of resilient seats or cdging.
Drains
/ / a. Each section has a drain, y;; ,
~
/ / b. Shut-off va'1ves for cach drain.
L2' / / c. No two sections with common pipe connection. ,
+
/ / d. All drains closed during in-place testing of filter ban'ks.
?: RDIARkS 7
7
%l *
~
b L.. >. n..
t,e,
.e g . . . . ,,3 -.
r
/ * /, s
' \, * %. * ,,
, G.. J'.
-.r > ,
g,. .
t >
m g.
- s.f
- T h--- ,
-l 1,
. ,e, *
)
,~ ,
e cf, +
- ",
- ee m4, s ' *% -
- ~ ~ - -
=
1
"*4 I s ~1 ' *. .'g 'N .
\
') >
1 f
s ,,T,2* , /
- y. A. ,f l T _ _ . , _ _ - _ _
j N/ i g'4..-
4 g- - - .
y
- r. Le v.o . .o n .o
\l)
]l' f.
,Rev. 1 .
NCS FORM NO. 2 Rev. 1 ,
PARTICULATE FILTER IN-PLACE LEAK TEST REPORT CUSTOMER Purchase Order No ,
LOCATION SYSTFlt -
4e '
NIDIBER OF FILTERS
?'
> 'FLOM ,-
i .
. AP llEFA FILTERS 1
.I, i FILTER TYPE i DATE OF TEST - -
V'lf Q % LEAKAGE % EFFICIENCY (DOP AEROSOL)
TEST RESULT .
t
~
REMARKS -
T ;x
- j. --
.;}s
. _ v -
m: .
?
c ,y-7, .
'* , l L.
~
r, % '. .> j a+ l A: -
l
- :s.;
.l , .. - _ ..
4
' TEST PEREORMED BY _ _ _ _ _ .
3
_g,- NUCl. EAR CONTAIN> TENT SYSTEMS, TNCORPORATED
{~ -
DATE ,,_ , _ ,_ __ . __
I ~.
.4 1 : ., :5- . ;,7
. }Qj r, . ,
- ' ' O
,' ~~s :. . .
AL _ .
CO L ~3~~
. -- . .. ~ . . , _ . _ _ .. ,
, .:4 %..
., i- .
NCS FOPJi No. 3 REV. 1 IN-PI. ACE -
CilARCOAL ADSORBER FILTER I.EAK TEST REPORT ,
CUSTOlfER Purchase Order No LOCATION
~
.- SYSTDI ,
NUMBER OF FILTERS ,
. ~ ,
. FLOW AP Cl!ARCOAL ADSORBERS ,
FILTER TYP'E , .
- DATE OF TEST
, TEST RESUf.T .% LEAKAGE % EFFICIENCY R$ MARKS
~
t -
J .
e ,
j . -q.
d . g
- r I-
. r-S *
- TEST PERFORMED BY . - - . - . . _ -
NUCI. EAR CON TAT. N.M.E. N,T., SYSTEMS,, INCORPORATED-DATE - .._ _ .- _ .--
aN 3.gy, COMTROUJcD COP.% . .
'. c
-- ~? {~
- u r.
L- , , , , _