Search by property

Jump to navigation Jump to search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Title" with value "Technical Specifications - SNM-2514 Renewal". Since there have been only a few results, also nearby values are displayed.

⧼showingresults⧽

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • RNP-RA/13-0079, Technical Specifications (TS) Section 5.8.6, Post Accident Monitoring (PAM) Instrumentation Report, 14-Day Report for the Inoperability of the Wide Range Containment Pressure Transmitter  + (Technical Specifications (TS) Section 5.8.6, Post Accident Monitoring (PAM) Instrumentation Report, 14-Day Report for the Inoperability of the Wide Range Containment Pressure Transmitter)
  • ML070310013  + (Technical Specifications (Ts), Amendments 180 and 167, Extension of TS Completion Times, on a One Time Basis, Associated with the Residual Heat Removal Service Water System, Diesel Generator Cooling Water System)
  • ML050120134  + (Technical Specifications (Ts), Revise TS Allowed Outage Times for TS 3.3.3, Accident Monitoring Instrumentation, to Be Consistent with the Completion Times in the Related Specification in NUREG-1431, Revision 2)
  • ML071340392  + (Technical Specifications (Ts), Revise TS 5.5.7, Ventilation Filter Test Program, to Correct Referenced Flow Units)
  • ML071760127  + (Technical Specifications (Ts), Revised TS 3.10.1, Inservice Leak and Hydrostatic Testing Operation, Consistent with Technical Specification Task Force-484)
  • ML031710773  + (Technical Specifications (Ts), Revising TS 3.5.3, Low-Pressure Injection, Condition a, to Change Completion Time from 72 Hours to 7 Days)
  • ML16267A001  + (Technical Specifications - Amendment 13 for the Purdue University Reactor, PUR-1)
  • ML062370475  + (Technical Specifications - Deletion of Reporting Requirement in Facility Operating License)
  • ML20082J260  + (Technical Specifications - Enhancing the Safety Impact)
  • ML062550413  + (Technical Specifications - Errata to Amendment No. 161, Dated July 27, 2006)
  • ML021680421  + (Technical Specifications - Farley Amendment Nos. 156 & 146)
  • ML062410188  + (Technical Specifications - Fuel Storage and Handling)
  • ML062350507  + (Technical Specifications - Issuance of Amendment Application of Alternative Source Term Methodology)
  • ML082720002  + (Technical Specifications - Issuance of Amendments Regarding Removing Notes Associated with Amendment Nos. 230 and 221 Regarding an Alternate Method to Monitor Rod Position for a Rod)
  • ML080710577  + (Technical Specifications - Issuance of Amendment Regarding Technical Specification Change 06-06 Revised Steam Generator Voltage-Based Repair Criteria Probability of Prior Cycle Detection (Popcd))
  • ML061600117  + (Technical Specifications - Issuance of Amendments Inservice Testing Program)
  • ML063240049  + (Technical Specifications - Issuance of Amendments 163, 163, and 163, Revise TS 3.7.2, Main Steam Isolation Valves (Msivs), to Include Specific Requirements)
  • ML043380221  + (Technical Specifications - Issuance of Amendment Changes to Safety Limit Minimum Critical Power Ratio S111396)
  • ML052200366  + (Technical Specifications - Issuance of Amendments Conditional Exemption from Measurement of End-Of-Life Moderator Temperature Coefficient)
  • ML080990830  + (Technical Specifications - Issuance of Amendments Regarding Inservice Testing Program)
  • ML081060309  + (Technical Specifications - Issuance of Amendment)
  • ML081340115  + (Technical Specifications - Issuance of Exigent Amendment Regarding Interim Alternate Criteria for Steam Generator Tube Repair)
  • ML021680400  + (Technical Specifications - McGuire Amendments 202 & 183)
  • ML020330004  + (Technical Specifications - Oyster Creek - Amendment No. 224 (Tac No MB2431))
  • ML080810408  + (Technical Specifications - Revision of Core Operating Limits Report (COLR) References for Realistic Large Break LOCA Methodology Minimum Containment Pressure)
  • ML20161A028  + (Technical Specifications - SNM-2514 Renewal)
Retrieved from "https://kanterella.com/Special:SearchByProperty/:Title/Technical-20Specifications-20-2D-20SNM-2D2514-20Renewal"