ML110050415
ML110050415 | |
Person / Time | |
---|---|
Site: | Salem, Hope Creek ![]() |
Issue date: | 10/14/2010 |
From: | Public Service Enterprise Group |
To: | Office of Nuclear Reactor Regulation |
References | |
LR-N10-0355 CY-AA-170-500, Rev 0 | |
Download: ML110050415 (35) | |
Text
Revision 0
Page 1 of 1
Level 2 - Reference Use PSEG NUCLEAR L.L.C.
METEOROLOGICAL MONITORI NG SYSTEM CALIBRATION AND MAINTENANCE
REVISION
SUMMARY
This is a new procedure, no revision bars were used. This procedure supersedes NC.CH-SC.MET-1206(Q), Meteorological Monitoring System Calibration and Maintenance, IAW Order
- 70079685-1990. No commitments have been changed or deleted. This is an OEM consolidation activity. DCP 80067994, which implemen ts the HC SPDS computer replacement, is incorporated in this revision. DCP 80095184, which implements the MET System new devices and MET Tower modification, is incorporated in this revision.
Subsection 5.4 adds information for Wind Direction and Speed sensor exchange.
Subsection 5.5 adds information for annual inspection frequencies for the tower and once per three year inspection fr equency for the guy wire anchors.
Due to the technical content and complexity of usage of this document, some deviations to the AD-AA-101 formatting process were approved by the CFAM.
CY-AA-170-500 METEOROLOGICAL MONITORING SYSTEM CALIBRATION AND MAINTENANCE TABLE OF CONTENTS Section Title Page 1.0 PURPOSE............................................................................................................................. 2 2.0 PREREQUISITES................................................................................................................. 2 3.0 PRECAUTIONS & LIMITATIONS ........................................................................................ 2
4.0 EQUIPMENT/ MATERIAL REQUIRED................................................................................. 3 5.0 PROCEDURE....................................................................................................................... 4
5.1 Monthly
Maintenance Checks.....................................................................................4 5.2 Pre-Calibration Set Up.................................................................................................7 5.3 Calibrations..................................................................................................................7 5.4 Annual Sensor Exchange..........................................................................................14
5.5 Tower
Functional Checks..........................................................................................14
5.6 Return
To Service......................................................................................................15
6.0 RECORDS.......................................................................................................................... 16
7.0 REFERENCES
.................................................................................................................... 16 8.0 GLOSSARY..........................................................................................................................17 ATTACHMENTS
, Wind Sensor Components.........................................................................................18 Attachment 2, Wind Sensor Mounting Options.................................................................................19 , Met Parameters.........................................................................................................20 Attachment 4 Wind Sensor Alignment.............................................................................................
.24 EXHI BITS Exhibit 1, Meteorological Monitoring Display System.......................................................................25 Exhibit 2, Meteorological Monitoring Data Acquisition System.........................................................27 Exhibit 3, Meteorological Tower........................................................................................................28 Exhibit 4, Support System Contacts..................................................................................................29 FORMS
Form 1, Test Equipment List.............................................................................................................31 Form 2, Meteorological Tower Calibration........................................................................................33 Form 3, Monthly Maintenance Check Sheet.....................................................................................34 Page 1 of 34 Rev. 0 CY-AA-170-500
1.0 PURPOSE
1.1 Provide
calibration instruction during system calibr ation and preventive maintenance activities.
1.2 Provide
instruction for Meteorological Monitoring System repair.
1.3 Provide
instruction for monthly system performance checks.
2.0 PREREQUISITES
2.1 Personnel
performing the calibrations described in this proced ure should have a comprehensive knowledge of the Meteorological Monitoring System.
2.2 Prior
to performing system calibration or maintenance, NOTIFY Salem Unit 1 and Hope Creek Control Rooms.
2.3 Work on the Meteorological Monitoring System requires a valid Order.
2.4 A full set of sonic wind sensors must be available for system calibration as calibration is performed by a wind tunnel test at an approved facility.
3.0 PRECAUTIONS
AND LIMITATIONS
3.1 IF it is suspected that test equipment is not performi ng properly, THEN PERFORM a comparison check with a similar device OR CHECK the device for calibration against a standard. This should be done prior to taking an y other correcti ve actions.
3.2 IF deficiencies are encountered during the performance of the procedure, THEN REPORT the deficiency to the job supervisor AND CREATE a notification IAW LS-AA-120, Issue Identification and Screening Process. NOTE these deficiencies and any corrective action (repairs or commitments to rework) in the REMARKS section of the Data Package Cover Sheet.
3.3 IF "AS FOUND" data is unobtainable, THEN NOTE the reason on the appropriate data sheet Index.
3.4 Equipment
repair is limited to meteorological instrument components (e.g., meteorological sensors, signal processing circuit boards, data loggers) for which a "like for like" replacemen t can be accomplished.
3.5 Any major equipment replacement should be done IAW with CC-AA-103, Configuration Change Control for Permanent Physical Plant Changes.
3.6 REPLACE
delta temperature thermistor s only in matching sets.
Page 2 of 34 Rev. 0 CY-AA-170-500
3.7 Specific
instruments on the main tower provide signals that are not transmitted to the Salem and Hope Creek stations. Reference Attachment 3.
3.8 This procedure maybe completed in whole or in part. Applicable steps within a section should be completed prior to starting the next section. When individual sections are performed out of sequence the applicable pre-requisite conditions for that section must still be met. The maintenance superv isor should determine which sections and what steps are to be performed.
4.0 EQUIPMENT/MATERIALS REQUIRED
4.1 Meters
or electronic test equipment used for calibration and/or repair should be NIST traceable and calibrated by the Measurements & Test Equipment (M&TE) Lab.
4.2 The following equipment is required:
NOTE: Calibration of the Me t One or RTP 2000 data loggers is a separate activity and is performed under separate contract administrated by PSEG Nuclear Digital Systems Group.
Functional MET-A & Met-B DAS (PC hardware). Met One Instrument Manual (VTD 325493) Ref. 7.1 Sufficient number of thermos bottles with crus hed ice & distilled water. M&TE calibrated multimeter (12 month calibration cycle) Safety climbi ng equipment Pulley, rope, bucket assembly Sound-powered head sets Voltage standard (12 month calibration cycle) Psychrometer (12 month calibration cycle) Soft sound-absorbent cloth Data Forms Calibration fixture - MetOne Model 70.5
Page 3 of 34 Rev. 0 CY-AA-170-500
5.0 PROCEDURE
5.1 Monthly Maintenance Checks NOTE: The following section is specific to mont hly PMs, display syst em surveillances, and instrument performance checks.
5.1.1 PRIOR
to starting PMs, CONTACT both Salem and Hope Creek Control Rooms.
5.1.2 RECORD
"As Found" readings on the monthly check sheet prior to any adjustments.
5.1.3 PERFORM
channel check and any required adjustments using the appropriate section of the Met One Instrument Manual, VTD 325493.
5.1.4 IF the adjustments are minor and do not affect system calibration, THEN PERFORM the adjustments.
DOCUMENT as appropriate using the SAP corrective action process. IF significant instruments, data logger or computer probl ems are found THEN CREATE a Notification using the appropriate SAP corrective action process.
5.1.5 RECORD
"As Left" readings on the appropriate monthly chec k sheets Forms.
5.1.6 CHECK
aspirator operation. IF inoperative, THEN CREATE a Notification IAW corrective action program AND REPAIR aspirator.
5.1.7 CHECK
EdgeTech dew point system as follows:
A. CHECK insect screen for cleanliness.
B. CHECK current dew-point reading with psychrometer readings.
C. COMPARE the EdgeTech dew point temperature with the MetOne humidity monitoring system using the appropriate conversion techniques.
D. COMPARE dew point temperature against the ambient te mperature to ensure that dew point is lower.
5.1.8 CHECK
solar radiation system as follows:
A. WIPE the glass bulb of pyrano meter clean and dry with fine muslin cloth or tissue paper.
B. CHECK spirit level to verify instrument is level.
C. IF condensation is observed, THEN REPLACE desiccant.
Page 4 of 34 Rev. 0 CY-AA-170-500
5.1.9 CHECK
precipitation system as follows:
A. TEST MetOne tipping bucket rain gauge by manually tipping bucket at 30 second intervals.
B. TIP bucket 5 times.
C. WAIT 15 minutes and the syst em will reset itself.
D. NOTE the time of the test in the log book.
E. RECORD any problems on the monthl y maintenance check sheet.
5.1.10 Wind speed and direction reviews.
A. REVIEW wind speed and direction trends using the appropriate trending functions on the MET-A, MET-B computers (i.e., TRENDS menu option or the SYSTEM FUNCTIONS, ARCHIVE RETRIEVAL menus).
B. REVIEW problem log report.
TAKE appropriate corrective action as necessary.
C. REVIEW INPUT CROSS CHECKS.
TAKE appropriate action as necessary NOTE: Wind direction fluctuations generally decrease with height and prevailing wind speed. Wind speed generally increases wi th height.
D. RECORD any suspected probl ems on monthly maintenance check sheet Form.
5.1.11 Delta Temperature reviews.
A. REVIEW temperature trends for the 150-33 foot, 197-33 foot and 300-33 foot delta temperature for behavior trace using the TRENDS or the SYSTEM FUNCTIONS, Arch ive Retrieval menu.
NOTE: Generally, the three delta temperatures should show the same trends. The longer interval (300-33 ft.) tr ace will likely be more positive or negative than t he 197-33 ft and the 150-33 ft. inte rval trace.
B. RECORD any suspected probl ems on monthly maintenance check sheet Form as appropriate.
Page 5 of 34 Rev. 0 CY-AA-170-500 5.1.12 MetOne humidity check.
A. COMPARE current dew-point and humidity reading with psychrometer readings.
B. COMPARE the Met One hum idity values with the Edge Tech dew point monitoring system using the appropriate conversion techniques.
5.1.13 Instrument power supply check
A. VERIFY DC instrument power for +12v, -12v output.
B. USE a voltmeter and extender board AND LOCATE test points 2, 12, & 21 using the VTD Manual Reference 7.1.
C. Verify DC instrument power for the +15v power supplies mounted near the surge protected terminal boards for each of the wind sensor loops.
D. USE a voltmeter AND LOCATE the appropriate term inals using the VTD Manual Reference 7.1.
E. RECORD any suspected problems on the appropriate monthly maintenance check sheet Form.
5.1.14 Verification of Data Acquisition Operability
NOTE: List of commands and operating instru ctions for MET-A and MET-B DAS are located in Met One Instru ment Manual (VTD 325493) and Scientech Meteorological System Users Manual.
A. CHECK the System time to ensure current time. System time is displayed in the right top corner of the display screen.
. NOTE: Database time is maintained as Gree nwich Mean Time (GMT) but displays will be local time.
B. USE the "15 MINUTE AVERAGE DATA" menu function to check averages.
C. USE the TRENDS menu to obtain current instan taneous values (use Attachment 3 to identify channel IDs of interest). THEN CHECK instantaneous input value or SYSTEM FUNCTIONS, ARCHIVE RETRIEVAL.
D RECORD any suspected problems on the appropriate monthly maintenance check shee t Form as appropriate.
Page 6 of 34 Rev. 0 CY-AA-170-500 5.2 Pre-Calibration Setup
5.2.1 COMPLETE
Test Equipment documentation using Form-1.
5.2.2 VERIFY
that power supply of translator cards provides a positive and negative 12.0 +/- 0.5 vdc.
5.2.3 Verify
the separately mounted 15 vdc power supplies for the wind sensor loops provide +15 vdc +/- 0.5 vdc.
5.2.4 PREPARE
a sufficient number of thermos bottles with ice-liquid mixture.
5.2.5 ENSURE
that channels to be calibrated are removed from service using Data Acquisition System (DAS) software IAW Met One VTD 325493 [Reference 7.1]
5.2.6 Prior
to any adjustment or repair, RECORD "AS FOUND" zero and span data for all channels on appropriate form.
NOTE: The Meteorological Monitor System v endor manual - Met One VTD 325493 [Ref.
7.1] - which provides detailed information on all system instruments (i.e., sensor, transmitters, translator cards, power supplie s, etc.), may be used in conjunction with system calibration procedures.
5.3 Calibrations
NOTE: Procedure Section 5.3 directions are specific to system calibration. These steps may also be used for trouble shooting and other corrective maintenance activities as necessary.
NOTE: While the Salem and Hope Creek Updated Final Safety Analysis Report (UFSAR) require daily channel checks and six month channel calibration, the Stations are currently calibrating the meteorological tower instruments on a Quarterly frequenc y, reference order 70102140.
NOTE: USE Form 1 Test Equipment List for all calibration activities.
5.3.1 Wind Direction Sy stem Calibrations NOTE: The annual sonic wind instrument calibration is performed in a wind tunnel at the manufacturer's or other approved facility. Ensu re that a complete set of replacement sensors is available prior to initiating the calibration.
A. TAKE the wind direction channel s out of service on the Master Computer using the Group Update menu function.
AWD300S - (Wind Direction @ 300')
Page 7 of 34 Rev. 0 CY-AA-170-500 AWD197S - (Wind Direction @ 197')
AWD150S - (Wind Direction @ 150')
AWD33S - (Wind Direction @ 33')
AWDBUS - (Wind Direction B/U @ 33')
B. USE the "15 Minute Average Data" display AND VERIFY that the appropriate channels indicate OS [Out of Service].
C. RETRACT the instrumentation boom.
NOTE: Orientation to true North was established during installation (DCP 80035257). Wind sensor orientation can only be visibly checked (see VTD 325493 for documentation).
D. CHECK alignment of MetOne 50.5 sensor using the MetOne orientation device Model 50.5.
ALIGN the orientation device with the black and white ground marking (and 4 th fence post west of the north apex of the security fence. REFER to Attachment 4).
E. USE Met One Users Manual VTD 325493 to make the necessary adjustments.
F. ORIENT the backup tower sensor using the calibration fixture [Met One Model 70.5] siting on the 3 rd fence post west of the north apex of the security fence.
REFER to Attachment 4.
G. IF troubleshooting is required THEN REFER to Ref 7.1 AND FOLLOW the maintenance/ trouble shooting direction.
H. Every quarterly calibration , CHECK the wind direction by covering the north-south transponder elem ents of the sonic sensor as directed in VTD 325493 [Attachment 1] also include east and west directions.
I. PERFORM an electronic zero and span using the zero and span switches on the respective translator cards and Ref 7.1.
J. RECORD the "AS LEFT" values on data calibration sheet Form-2, Meteorological Tower Calibration.
K. VERIFY that heat tracing to the sensors mounted on the tower is operating properly.
L. PUT the direction channels back in service on the Master Computer using the system function menu, group updates for wind direct ion instruments.
Page 8 of 34 Rev. 0 CY-AA-170-500 M. VERIFY that all wind direction channels ha ve been properly returned to service by using a suitable display menu such as MET INPUT DATA or INPUT CROSS CHECK to assure that the OS identifier is no longer present. N. Following every other six month calibration, PACKAGE AND SEND the replaced instruments to an approved facility for calibration.
5.3.2 Wind Speed System NOTE: The annual sonic wind instrument calibration is performed in a wind tunnel at the manufacturer's or other approved facility. Assu re that a complete set of replacement sensors is available prior to performing the calibration.
A. TAKE the wind speed channels out of service on th e Master Computer using the Group Update menu function.
AWS300S - (Wind Speed @ 300')
AWS197S - (Wind Speed @ 197')
AWS150S - (Wind Speed @ 150')
AWS33S - (Wind Speed @ 33')
AWSBUS - (Wind Speed B/U @ 33')
B. USE the "15 Minute Average Data" display AND VERIFY that the wind speed channels indicate OS [Out of Service]
C. RETRACT the instrumentation boom.
D. REFER to VTD 325493 AND FOLLOW the wind speed translator calibration sequence.
E. Every quarterly calibration, CHECK the wind speed instrument by covering wind sensor tr ansponder el ements. IF this is a six month calibration, THEN PROCEED to the next step.
F. MOUNT the instrument on the appropriate boom and check as follows:
- 1. VERIFY directional alignment is correct, THEN SECURE sensor in mounting fixture.
- 2. CONNECT instrument cable and heat trace cable.
- 3. COVER sonic wind sensor IAW VTD 325493 Ref 7.1 AND RECORD wind speed.
Page 9 of 34 Rev. 0 CY-AA-170-500
- 4. I F the wind speed does not go full scale THEN ADJUST IAW VTD 325493. . 5. EXTEND boom AND CLAMP in place.
G. RETURN the wind speed channel s to service on the computer by using the appropriate Group Update menu function.
H. USE a suitable display menu such as MET INPUT DATA or INPUT CROSS CHECK AND VERIFY that the OS identifier is no longer present.
I. Following six month calibration, PACKAGE AND SEND the replaced instruments to an approved facility for calibration.
J. RETURN the system to normal operation.
5.3.3 EdgeTech
Dew Point and Temperature System NOTE: The EdgeTech Model 200M Dewtrack Meteorological System Operator Manual is included in the Met One Manual (Ref 7.1). This manual should be referred to for calibration and repair of the dew point monitoring system.
A. REFER to Section 6.4 of the EdgeTech manual for calibration and repair of the dew point sensor.
B. INSPECT the sensor insect screen and mirror.
CLEAN if required.
C. RETURN the system to normal operation.
D. CHECK current dew point reading with Psychrometer reading AND CONVERT from wet bulb to dew point temperature.
E. RETURN the dew point and Ed geTech temperature channels to service on the Master Computer using the SYSTEM FUNCTIONS, GROUP UPDATE menu
F. USE the "15 Minute Average Data" menu AND VERIFY that the OS flag has been removed.
Page 10 of 34 Rev. 0 CY-AA-170-500 5.3.4 Met One Ambient, Delta Temperature and Humidity System NOTE: The "Met One" temperature monitoring system consists of eight channels: Ambient temperature at 33'and 300' Ambient temperature at 300' Delta temperature 300-33' Delta temperature 197-33' Delta temperature 150-33' Humidity - 300' Humidity - 33'and 300' Shelter temperature A. REMOVE the temperature channels from se rvice on the Ma ster Computer by using the appropriate group update functions.
B. CHECK the zero and span of all 8 channels.
C. PLACE the thermistor probes in the ice baths.
D. RECORD the "AS FOUND" values of all 8 channels on th e appropriate Form.
E. REFER to MetOne Instrument Manual (VTD 325493) AND PERFORM the ambient temperature calibration sequence as indicated in the manual.
F. RECORD "AS LEFT" values for zero, span and the ice bath values on the appropriate Form.
G. REFER to MetOne Instrument Manual (VTD 325493) AND PERFORM the delta temperature calibration sequence as indicated in Reference 7.1.
H. RECORD "AS LEFT" values for zero, span and the ice bath values on the appropriate Form.
I. REFER to MetOne Instrument Manual (VTD 325493) AND PERFORM the humidity calibration sequence using the M&TE calibrated psychrometer as the reference point. IF necessary, CLEAN the sensor element as directed in the MetOne manual. IF adjustments are required THEN PERFORM them as indicat ed in the manual.
J. RECORD "AS LEFT" values for zero, span values on the appropriate Form.
K. REFER to MetOne Instrument Manual (VTD 325493) AND as necessary, PERFORM the shelter temperature calibrati on sequence as indicated in the manual. (Shelter sensor is not part of the required parameters)
Page 11 of 34 Rev. 0 CY-AA-170-500 L. RECORD "AS LEFT" values for zero, span and the ice bath values on the appropriate Form.
M. PLACE the temperature channels back in service on the Master Computer using the appropriate Syst em Function, Group Update menu functions.
N. VERIFY that all temperature and humidity channels have been properly returned to service by viewing the "15 Minute Aver age Data" menu options.
O. VERIFY that each temperature probe aspirator is operating by listening for the sound of the fan. IF not operating, THEN CONSULT VTD 325493 for troubleshooting.
5.3.5 Precipitation
A. REMOVE the precipitation channel from se rvice on the Ma ster Computer using the appropriate Group Update menu.
B. RECORD the " AS FOUND" zero and span values using the translator fixed inputs.
C. REMOVE precipitation gauge cover AND SLOWLY TIP bucket ten times.
RECORD "AS FOUND" values for 0.10 inches of precipitation.
D. REFER to Rainfall Calibra tion Sequence and the VTD Manual for instruction on rain gaug e instrument calibration.
E. RECORD the " AS LEFT" values for the translator fixed input zero and span.
F. SLOWLY TIP bucket 10 times.
RECORD " AS LEFT" values for 0.10 inches of precipitation.
G. PLACE the precipitation channel back in service on the Master Computer using the appropriate Gro up Update menu function.
H. USE MET INPUT DATA OR INPUT CROSS CHECK AND VERIFY that the DAS channel no longer indicates OS.
Page 12 of 34 Rev. 0 CY-AA-170-500
5.3.6 Barometric
Pressure A. REMOVE the barometric channel from service on th e Master Computer by using appropriate Group Update menu function.
B. PRIOR to any adjustments, CHECK the system zero and span.
C. RECORD the " AS FOUND" values on the check sheet.
D. REFER to Pressure Calibration Sequence and the Met One Instrument Manual (Ref 7.1) for barometric pressu re instrument calibration instruction.
E. RECORD the " AS LEFT" zero and sp an values.
F. RETURN the system to normal operation.
G. COMPARE the barometric pr essure reading wi th the M&TE Lab.
H. RECORD the " AS LEFT" value on the appropriate data calibration Form.
I. PLACE the barometric channel back in service on the Master Computer using the appropriate Gro up Update menu function.
J. USE the "15 Minute Average Data" to verify that the OS indication is no longer present.
5.3.7 Solar
Radiation A. REMOVE the solar channel from service on the Master Computer using the appropriate Gr oup Update menu.
B. RECORD the " AS FOUND" zero and span values on the calibration check sheet.
C. REFER to (Reference 7.1) instrument calibration procedure to perform the calibration of this channel.
D. RECORD the " AS LEFT" zero and span values on the appropriate data calibration Form.
E. PLACE the solar channel back in servic e on the Master Computer using the appropriate Group Update menu function.
F. USE the "15 Minute Average Data to verify that the OS indication is no longer present.
Page 13 of 34 Rev. 0 CY-AA-170-500
5.4 Annual
Sensor Exchange 5.4.1 Wind Direction Sensors 5.4.1.1 Every other six months calibration (once per year)
REMOVE all transmitters from the tower AND REPLACE as follows:
5.4.1.2 REMOVE sonic sensors.
REFER to Attachment 2, Wind Transmitter. 5.4.1.3 INSTALL the primary tower transmitters AND ORIENT all sonic wind sensors IAW Step 5.2.1.D.
5.4.1.4 INSTALL the back-up pole transmitter AND ORIENT IAW Step 5.2.1.F 5.4.2 Wind Speed Sensors 5.4.2.1 Once a year (every other six month calibration)
REMOVE the transmitter from the tower AND REPLACE as follows:
5.4.2.2 Prior to any adjustments and with the boom retracted COVER the sonic wind sensor AND RECORD the "AS FOUND" wind speed zero value for the digital display.
5.4.2.3 DISCONNECT instrument sensor cable and heating cable AND LOWER sensor to the ground.
5.4.2.4 REPLACE the wind speed sensors AND RETURN new sensors to the respective tower elevation.
5.5 Tower
Functional Checks Note: IF the tower navigation light bulbs are out, THEN NOTIFY IT who will contact the vendor to arrange for bulb replacement.
5.5.1 VISUALLY
check the tower lightning ground system for broken or loose cables.
5.5.2 CHECK
the junction boxes for weather tight integrity.
5.5.3 RECORD
any tower maintenance required on the remarks sheet.
Page 14 of 34 Rev. 0 CY-AA-170-500
5.5.4 CHECK
the material condition of the tower area including:
- Weeds and grass
- Trash - Security fence
- Signage 5.5.5 Annually PERFORM tower inspections to ANSI/TIA/EIA-222 standards.
5.5.6 PERFORM
guy wire inspections annually.
5.5.7 PERFORM
guy wire anchor inspecti ons once per three years.
5.6 Return
to Service
5.6.1 ENSURE
that all systems and equipment are returned to normal operation.
5.6.2 VERIFY
that both DAS computers display the correct local time.
5.6.3 COMPLETE
log book entries.
5.6.4 COMPLETE
the check sheets.
5.6.5 MAKE the following
" RETURN TO SERVICE
" notifications:
- Salem Unit 1 Control Room
- Hope Creek Control Room
5.6.6 ENSURE
that the Order is co mplete and signed off.
Page 15 of 34 Rev. 0 CY-AA-170-500
6.0 RECORDS
6.1 RETAIN and PROCESS all records IAW RM-AA-101, Records Management Program.
6.2 Copies
of records generated by this proced ure may be stored locally for information and program support. All completed forms, i.e. completed work order and technician field notes from inspections, calibrations, etc., should be attached to the appropriate orde rs for proper work closeout.
7.0 REFERENCES
7.1 Salem
and Hope Creek Nucl ear Generating Stations Meteorological System Owners Manual, VTD 325493
7.2 Salem
Unit 1 Nuclear Generating Station MET One Model 50.5 Wind Sensor Operation Manual, VTD 325462 7.3 Hope Creek UFSAR Sections 2.3 and 7.7.1.11
7.4 Salem
UFSAR Sections 2.3, 7.2, and 7.7.2.13. 7.5 LS-AA-120, Issue Identific ation and Screening Process 7.6 AD-AA-101-1002, Writer's Guide and Process Guide for Procedures and T&RMs 7.7 NRC Regulatory Guide 1.23 7.8 ANS/ANSI 3.11-2000, Determining Meteorological Informat ion At Nuclear Facilities 7.9 ANSI/TIA/EIA-222 Structural Standards for Steel Antenna Towers and Antenna Supporting Structures 7.10 NC.CH-AP.MET-1201(Q), Meteorological Monitoring Program Administration 7.11 NC.CH-TI.MET-1202(Q), Meteorological System O peration/ Interrogation 7.12 Order 80077897
7.13 PCR Order 70102140
7.14 DCP 80067994
7.15 DCP 80095184 7.16 Cross-References 7.16.1 CC-AA-103, Configuration Change Control for Permanent Physical Plant Changes 7.16.2 RM-AA-101, Records Management Program Page 16 of 34 Rev. 0 CY-AA-170-500
Page 17 of 34 Rev. 0 8.0 GLOSSARY 8.1 MET-A and MET-B - Meteorological data acquisition s ystem computer s located in the meteorological monitoring system instrument building. These computers are also refereed to as Met Host A and Host B in some Scientech documentation. MET-A and MET-B are standard PCs running MS Windows and Scientech software.
8.2 DVM - Digital Volt Meter
8.3 Channel
Calibration - A loop calibration as defined in the Station Technical Specifications. [There are no alarms or trip functions associated with any meteorological monitoring parameter (There is an alarm associated with loss of AC power at the meteorological to wer. This is not considered part of the meteorological instrument system)]
8.4 Surveillance
- Examination of channel information to determine operability. [See Technical Specification definition for Ho pe Creek.]
8.5 PCB - Printed Circuit Board The boards are also referred to as a logic cards or translator cards. The electric components which translate an electronic signal from a meteorological instrument sensor to an output which is supplied to the data loggers and the DAS.
8.6 Functional
check - Test pe rformed to check the correct functional operation of the instrument being observed/ tested. The so nic wind instrument are functional check for proper operation using the procedure described in the MetOne Instrument Manual.
8.7 Loop Check -A loop check is performed by simulating the input to the sensor with the output displayed by the channel read out. Sonic wind instruments must be calibrated at an approved facility using a wind tunnel. Therefor e loop check cannot be performed from the inst rument to the data acquisition system.
Wind instrument will be checked using Functional Testing. Ambient and delta temperature measurements will be loop c hecked from the instrument to the data acquisition computers.
CY-AA-170-500 ATTACHMENT 3 Page 1 of 4 MET PARAMETERS AWD33DL 0 - 33 Foot Wind Direction from Data Logger AWD150DL 1 - 150 Foot Wind Direction from Data Logger AWD300DL 2
- 300 Foot Wind Direction from Data Logger AWD33RT 3 - 33 Foot Wind Direction from RTP AWD150RT 4 - 150 Foot Wind Direction from RTP AWD300RT 5 - 300 Foot Wind Direction from RTP AWS33DL 6
- 33 Foot Wind Speed from Data Logger AWS150DL 7 - 150 Foot Wind Speed from Data Logger AWS300DL 8 - 300 Foot Wind Speed from Data Logger AWS33RT 9 - 33 foot Wind Speed From RTP AWS150RT 10 - 150 foot Wind Speed From RTP AWS300RT 11 - 300 foot Wind Speed From RTP AWDBDL 12 - Backup Tower Wind Direction from Data Logger AWSBDL 13 - Backup Tower Wind Speed from Data Logger AWDBRT 14 - Backup Tower Wind Direction from RTP AWSBRT 15 - Backup Tower Wind Speed from RTP ABARODL 16 - Barometric Pressure from Data Logger ABARORT 17 - Barometric Pressure from RTP ASIG33DL 18 - 33 Foot Sig Theta From Data Logger ASIG33 RT 19 - 33 Foot Sig Theta From RTP ASIG150DL 20 - 150 Foot Sig Theta From Data Logger ASIG15 0RT 21 - 150 Foot Sig Theta From RTP ASIG300DL 22 - 300 Foot Sig Theta From Data Logger ASIG30 0RT 23 - 300 Foot Sig Theta From RTP ASIGBDL 24 - Backup Sig Theta From Data Logger ASIGBRT 25 - Backup Sig Theta From RTP ATAMBDL 26 - 33 Foot Ambient Temp from Data Logger ATAMBRT 27 - 33 Foot Ambient Temp from RTP ADT300DL 28 - Delta T from 300-33 Foot Level - Data Logger ADT300R T 29 - Delta T From 300-33 Foot Level - RTP ADT150DL 30 - Delta T From 150-33 Foot Level - Data Logger ADT150R T 31 - Delta T From 150-33 Foot Level - RTP ASOLDL 32 - Solar Radiation From Data Logger ASOLRT 33 - Solar Radiation From RTP ADEWDL 34 - 33 Foot Dew Point From Data Logger ADEWRT 35 - 33 Foot Dew Point From RTP ARHDL 36 - 33 Foot Relative Humidity from Data Logger ARHRT 37 - 33 Foot Relative Humidity from RTP APRECI PDL 38 - Precipitation From Data Logger APRECI PRT 39 - Precipitation From RTP The followi ng parameters are available at the Meteorological System DAS in the Met Shelter and are not transmitted to the Salem or Hope Creek Stations:
ADT197DL 40 - Delta T from 197-33 Foot Level - Data Logger ADT197RT 41 - Delta T from 197-33 Foot Level - RTP ATAM300DL 42 - Ambient Temp 300 Foot Level - Data Logger ATAM300RT 43 - Ambient Temp 300 Foot Level - RTP AWD197DL 44 - 197 Foot Wind Direction from Data Logger AWD197RT 45 - 197 Foot Wind Direction from RTP AWS197DL 46 - 197 Foot Wind Speed from Data Logger AWS197RT 47 - 197 Foot Wind Speed from RTP ARH300DL 48 - 300 Foot Relative Humidity from Data Logger ARH300RT 49 - 300 Foot Relative Humidity from RTP ASIG197DL 50 - 197 Foot Sigma Theta from Data Logger ADEW300DL 51 - 300 Foot Dew Point from Data Logger Page 20 of 34 Rev. 0 CY-AA-170-500 ATTACHMENT 3 Page 2 of 4 MET PARAMETERS The following 16 outputs are 15-minute average data points that duplicate the signals in the curren t MET system. A9800 0 Wind Speed @33 FT 15-Min Avg A9811 8 Barometric Pressure 15-Min Avg A9801 1 Wind Speed @150 FT 15-Min Avg A9812 9 Net Solar Radiation 15-Min Avg A9802 2 Wind Speed @300 FT 15-Min Avg A9991 10 Ambient Temp @33 FT 15-Min Avg A9803 3 Wind Dir @33 FT 15-Min Avg A9992 11 Dew Point @33 FT 15-Min Avg A9804 4 Wind Dir @150 FT 15-Min Avg A9993 12 Temp 150-33 FT 15-Min Avg A9805 5 Wind Dir @150 FT 15-Min Avg A9994 13 Temp 300-33 FT 15-Min Avg A9806 6 Backup Wind Speed 15-Min Avg A9998 14 Relative Humidity @33 FT 15-Min Avg A9807 7 Backup Wind Dir 15-Min Avg A9999 15 15-Minute Total Precipitation The following parameters are available at the Meteorological System DAS in the Met Shelter and are not transmitted to the Salem or Hope Creek Stations:
A9900 16 Wind Dir @197 FT 15-Min Avg A9901 17 Wind Speed @197 FT 15-Min Avg A9902 18 Ambient Temp @300 FT 15-Min Avg A9903 19 Relative Humidity @300 FT A9904 20 Temp 197-33 FT 15-Min Avg The following 16 outputs are 15-minute rolling average data points.
A9800R 0 Wind Speed @33 FT 15-Min Rolling Avg A9801R 1 Wind Speed @150 FT 15-Min Rolling Avg A9802R 2 Wind Speed @300 FT 15-Min Rolling Avg A9803R 3 Wind Dir @33 FT 15-Min Rolling Avg A9804R 4 Wind Dir @150 FT 15-Min Rolling Avg A9805R 5 Wind Dir @150 FT 15-Min Rolling Avg
Page 21 of 34 Rev. 0 CY-AA-170-500 ATTACHMENT 3 Page 3 of 4 MET PARAMETERS A9806R 6 Backup Wind Speed 15-Min Rolling Avg A9807R 7 Backup Wind Dir 15-Min Rolling Avg A9811R 8 Barometric Pressure 15-Min Rolling Avg A9812R 9 Net Solar Radiation 15-Min Rolling Avg A9991R 10 Ambient Temp 15-Min Rolling Avg A9992R 11 Dew Point 15-Min Rolling Avg A9993R 12 Delta Temp 150-33 FT 15-Min Rolling Avg A9994R 13 Delta Temp 300-33 FT 15-Min Rolling Avg A9998R 14 Relative Humidity 15-Min Rolling Avg A9999R 15 15- Minute Total Precipitation The following parameters are available at the Meteorological System DAS in the Met Shelter and are not transmitted to the Salem or Hope Creek Stations:
A9900H 16 Wind Dir @197 FT 15-Min Avg - Hourly A9900R 17 Wind Dir @197 FT 15-Min Avg - Rolling A9900RT 18 Wind Dir @197 FT 15-Min Avg - Rolling Towards A9900S 19 Wind Dir @197 FT 15-Min Avg - Selected A9900T 19 Wind Dir @197 FT 15-Min Avg - Towards A9901H 20 Wind Speed @197 FT 15-Min Avg - Hourly A9901R 21 Wind Speed @197 FT 15-Min Avg - Rolling A9901S 22 Wind Speed @197 FT 15-Min Avg - Selected A9902H 23 Ambient Temp @300 FT 15-Min Avg - Hourly A9902R 24 Ambient Temp @300 FT 15-Min Avg - Rolling A9902S 25 Ambient Temp @300 FT 15-Min Avg - Selected A9904H 26 Delta Temp @197-33 FT 15-Min Avg - Hourly A9904R 27 Delta Temp @197-33 FT 15-Min Avg - Rolling A9904S 28 Delta Temp @197-33 FT 15-Min Avg - Selected The following group of signals are used to produce X-Y plot date for wind vectors AWD33XV 0 - 33 Foot X vector AWD33YV 1 - 33 foot Y vector AWD150XV 2 - 150 Foot X vector AWD150YV 3 - 150 Foot Y vector AWD300XV 4 - 300 Foot X vector AWD300YV 5 - 300 Foot Y vector Page 22 of 34 Rev. 0 CY-AA-170-500
Page 23 of 34 Rev. 0 ATTACHMENT 3 Page 4 of 4 MET PARAMETERS The following points are 15 minute standard deviation calculation results A9813 0 Backup Sig Theta @33 FT 15-Min Avg A9995 1 Sig Theta @33 FT 15-Min Avg A9996 2 Sig Theta @150 FT 15-Min Avg A9997 3 Sig Theta @300 FT 15-Min Avg The following parameters are available at the Meteorological System DAS in the Met Shelter and are not transmitted to the Salem or Hope Creek Stations:
A9905 4 Sig Theta @197 FT 15-Min Avg A9905H 5 Sig Theta @197 FT 15-Min Avg - Hourly A9905R 6 Sig Theta @197 FT 15-Min Avg - Rolling A9905S 7 Sig Theta @197 FT 15-Min Avg - Selected
The following points are the PASQUILL Stability Class Points
APASQ33 0 Pasquill Stability Class - 33ft APASQ150 1 Pasquill Stability Class - 150ft APASQ300 2 Pasquill Stability Class - 300ft APASQ33B 3 Pasquill Stability Class - 33ft Backup APASQUILL 4 Selected Pasquill Stability Class APASQDT150 5 Delta T stability class, 150 FT APASQDT300 6 Delta T stability class, 300 FT The following parameters are available at the Meteorological System DAS in the Met Shelter and are not transmitted to the Salem or Hope Creek Stations:
APASQ197 7 Pasquill Stability Index - Rolling - 197ft APASQ197A 8 Pasquill Stability Index - 197 ft APASQDT197 9 Delta T Pasquill Stability Index - Rolling - 197ft APASQDT197 10 Delta T Pasquill Stability Index - 197ft
CY-AA-170-500 EXHIBIT 2 METEOROLOGICAL MONITORING DATA ACQUISITION SYSTEM Signal Conditione r(Primary Tower)Signal Conditione r(Backup Tower)Data Logge r Data Logge rRTP 2000R*Time Host AR*Time Host B Hub300'. Towe r 33" Tower To Plant NetworkRS-232RS-232 Data Splitte rRS-232 link to SPDSRS-232 link to SPDS Data Splitte r Page 27 of 35 Rev. 0
CY-AA-170-500 EXHIBIT 3 METEOROLOGICAL TOWER
JB4 JB3 JB2 JB1A JB 1 MET TOWER SIMET-1MET NEW PLATFORM NEW JB1A EXISTING 33' ELEVATION WEATHER ARM AND JB3. REPLACED EXISTING HUMIDITY SENSOR IN ASPIRATED
SHEILD WITH NEW DIFF TEMP.
SENSOR. INSTALLED NEW HUMIDITY
DEVICE UTILIZING EXISTING SPARE CONDUCTORS IN JB3 EXISTING 300' ELEVATION WEATHER ARM AND JB1. ADD NEW HUMIDITY AND AMBIENT TEMPERATURE DEVICES UTILIZING EXISTING SPARE CONDUCTORS IN JB1 NEW 197' ELEVATION WEATHER ARM WITH NEW WIND SPEED/
DIRECTION AND TEMP. DEVICES 2 NEW CONDUITS WITH INSTRUMENT AND POWER CABLES UTILIZING SPARES/CONNECTIONS IN JB2 EXISTING 150' ELEVATION WEATHER ARM AND JB2. CONNECT NEW SIGNALS FROM 197' NOTES:1. PICTOGRAM IS NOT TO SCALE
- 2. ALL WEATHER ARMS EXTEND
APPROX. 8'-0" 3. NEW JB1A IS 12H x 14W x 6D REFERENCE DRAWINGS:MET TOWER EQUIPMENTDWG. #211019 MET TOWER TRANSMITTERS DWG. #249635
MET TOWER ARRANGEMENT DWG. #239850
MET BUILDING 1PNL14131 DWG. #605799
DCP 80095184 ADLEXISTING BASELINE JB4.
REPOSITION OUTLET. ADD TERM BOARD. INTERCONNECT SIGNALS UTILIZING EXISTING SPARE CONDUCTORS.
80095184R0 SUP01R0 PICTOGRAM Page 28 of 34 Rev. 0
CY-AA-170-500 EXHIBIT 4 SUPPORT SYSTEM CONTACTS Name/Organization Function Telephone NumberSalem Control Room Shift Manager Operations 339-5201/5111
339-5200 Hope Creek Control Room
Shift Manager Operations 339-3059 339-3027 Healy Company
Mike Healy Maintenance and Calibration
Consultant (717) 548-3786
(717) 548-3035
Meteorological Evaluation
Srvs Pat Brennan Meteorological Consultant (data interrogation and analysis)
(631) 691-3395 ABS Consulting LLC Mark Abrams MIDAS (301) 907-9100 Meteorological Instrument
Bldg Support 339-2596 Hope Creek Chemistry
Jenny Shelton
Meteorological Monitoring Program
Support:Sensor Cal / Maintenance
339-1138 Dial-up Data Acquisition Primary DAS
Back-up DAS
Meteorological data display
J. Southers Meteorological Display & Data Acquisition 339-5630 Help Desk Telecomm 339-5555 Security Security, Building and Grounds 339-2222 Scientech DAS (860) 563-7572 Emergency Preparedness
G. Young Emergency Preparedness Support
339-3804 Maintenance
Salem WIN Maintenance Support -
CM/PM Workorders 2390 / 5180 Facilities Maintenance Don Adams Fill MET diesel 1040 / 5022 Information Technology
J. Southers
J. Harris Computer System Support
339-5630 339-1519 Supplemental Network/Radio
Support Hobart Burnett IT Services 339-1728 Salem System Engineering
G. Greer System Engineer 339-3651 Page 29 of 34 Rev. 0
CY-AA-170-500 Information Technology Netops Tower Beacon Lights
Network Hardware
Radio Systems (including alarms)
Pager Systems 339-7008 Information Technology
Mark Ferelli Structural Inspection 339-5049 IT Corp Tom Chipko UPS System 609-799-6900 Salem System Engineering
D. Kolasinski Diesel Generator Technical Issues 339-2055 Facilities Maintenance
D. Barner Diesel Generator fuel and oil 339-1601 Salem Mechanical
Maintenance
D. Brown Diesel Generator Maintenance 339-2770 Yard Maintenance Electrical, I&C S. Sheehan Power, Oversight for Maintenance Vendor-Healy 339-2389 Hope Creek Design
Engineering
A. Ghose Met Structure 339-2034 Fire Protection
FP Duty Supervisor Fire Protection 339-2803 Page 30 of 34 Rev. 0
CY-AA-170-500 FORM - 1 Page 1 of 2 TEST EQUIPMENT LIST TEST EQUIPMENT Test Equipment Id No. Cal Date Data Precision Model 8100 DC Std Psychrometer Model 566 Fluke DPC Model 701 CALIBRATION TOLERANCE INSTRUMENT UNITS VALUE Zero - Span 1 NOTES Wind Direction 300 ft.
Deg. (+/-) 5 358 - 359 Tolerance on factory certs 2 Wind Speed 300 ft.
MPH (+/-) 0.5 0 - 111.8 Tolerance on factory certs 2 Wind Direction 150 ft.
Deg. (+/-) 5 358 - 359 Tolerance on factory certs 2 Wind Speed 150 ft.
MPH (+/-) 0.5 0 - 111.8 Tolerance on factory certs 2 Wind Direction 33 ft.
Deg. (+/-) 5 358 - 359 Tolerance on factory certs 2 Wind Speed 33 ft.
MPH (+/-) 0.5 0 - 111.8 Tolerance on factory certs 2 Wind Direction B/U 33 ft.
D eg. (+/-) 5 358 - 359 Tolerance on factory certs 2 Wind Speed B/U 33 ft.
MPH (+/-) 0.5 0 - 111.8 Tolerance on factory certs 2 Ambient Temperature 33 ft.
Deg C. (+/-) 0.5
-50 to +50 Ice Bath = 0 Deg C Temperature 300 - 33 ft. Deg C. (+/-) 0.1 -5.0 to 10.0 Ice Bath = 0 Deg C Temperature 150 - 33 ft. Deg. C. (+/-) 0.1 -5.0 to 10.0 Ice Bath = 0 Deg C EdgeTech Dew Point 33 ft.
Deg. C. (+/-) 0.5
-50 to +50 Pressure In. Hg (+/-) 0.1 26.0 to 32.0 Solar Radiation Lg/cm 2 (+/-) 0.02 0 to 2.0 Relative Humidity 33 ft.
% (+/-) 4 0 to 100 Range 10% - 100% Precipitation 1n. (+/-) 0.01 0 to 1 Ambient Temperature 300 ft.
Deg C. (+/-) 0.5
-50 to +50 Ice Bath = 0 Deg C 3 Relative Humidity 300 ft.
% (+/-) 4 0 to 100 Range 10% - 100%
3 Wind Direction 197 ft.
Deg. (+/-) 5 358 - 359 Tolerance on factory certs2,3 Wind Speed 197 ft.
MPH (+/-) 0.5 0 - 111.8 Tolerance on factory certs2,3 Temperature 197 - 33 ft. Deg C. (+/-) 0.1 -5.0 to 10.0 Ice Bath = 0 Deg C 3
- 1. Zero & Span are MetO ne Translator Expected Outputs 2. Factory calibration cert ification provides calibrat ion record (not settable). 3. Sensor values are not transmi tted to the Salem or Hope Creek Stations Page 31 of 34 Rev. 0
CY-AA-170-500 Page 32 of 34 Rev. 0 FORM - 1 Page 2 of 2 TEST EQUIPMENT LIST
VERIFICATION
Instrument Power Supply Design +12v +/- 0.5 Design -12v +/- 0.5 Actual volts DC Actual volts DC Wind Sensor Loop Power Supply Design +15v +/- 0.5 Actual volts DC Barometric Pressure Met Tower M&TE in. Hg.in. Hg.
Dew Point EdgeTech Deg CPsychrometer*
Deg C. *Calculate from wet bulb reading
Calibration Period From:_________ To:__________ Order No.______________
Performed by:____________
_____ Date:________
Reviewed by:_________________
Date:_________
CY-AA-170-500 FORM - 2 Page 1 of 1 METEOROLOGICAL TOWER CALIBRATION Digital Work Order #______________________
As Found As Left PARAMETER ZERO SPAN Functional Check N-S Functional Check E-W Ice Bath ZERO SPAN Functional Check N-S Functional Check E-W Ice Bath Wind Dir 300' Wind Spd 300' Wind Dir 150' Wind Spd 150' Wind Dir 33' Wind Spd 33' Wind Dir BU - 33' Wind Spd BU - 33' Temp Amb 33' T 300'-33' T 150'-33' Dew Pt EdgeTech Barometric Pres Solar Rad Relative Humidity 33' Temp Amb 300' 2 Relative Humidity 300' 2 Wind Dir 197' 2 Wind Spd 197' 2 T 197'-33' 2 Prec. Tip Bkt Zero Span 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 As Found 1 As Left 1. Calibration of tipping Bucket r equires only 20 tips (0.2 in).
- 2. Sensor values are not transmitted to the Salem or Hope Creek Stations Performed By: ________________________________ Date: ___________________
Reviewed By: ________________________________ Date: ___________________
Page 33 of 34
Rev. 0
CY-AA-170-500 FORM-3 Page 1 of 1 MONTHLY MAINTENANCE CHECK SHEET LOCATION: Meteorological Tower Work Order
- Digital System AS FOUND 1 AS LEFT 1 PARAMETER ZERO SPAN ZERO SPAN REMARKS 2 WD 300' WS 300' WD 150' WS 150' WD 33' WS 33' WD BU - 33' WS BU - 33' Ambient Temp 33' T 300'-33' T 150'-33' EdgeTech Dew Pt MetOne Humidity 33' Barometric Pressure Precipitation Tip Bkt Solar Rad Ambient Temp 300' 3 WD 197' 3 WS 197' 3 T 197'-33' 3 MetOne Humidity 300' 3 1 If data are missing due to equipment malfunction indicate as N/A (not available) 2 Instrument tolerances are specified on Form-1 3 Sensor values are not transmitted to the Salem or Hope Creek Stations Performed by:____________________ Date:___________
Reviewed by:____________________
Date:___________
Page 34 of 34
Rev. 0