ML17151B057

Fire Protection Evaluations for Unique or Unbounded Fire Barrier Configuration, M-663-00017A, Rev. W05-01

ML17151B057
Person / Time
Site:	Wolf Creek
Issue date:	03/09/2017
From:	Wolf Creek
To:	Office of Nuclear Reactor Regulation
Shared Package
ML17151A982	List: ML17151A981 ML17151A992 ML17151A993 ML17151A996 ML17151A997 ML17151A999 ML17151B000 ML17151B002 ML17151B003 ML17151B005 ML17151B007 ML17151B008 ML17151B009 ML17151B010 ML17151B011 ML17151B013 ML17151B014 ML17151B015 ML17151B016 ML17151B018 ML17151B019 ML17151B020 ML17151B033 ML17151B036 ML17151B039 ML17151B040 ML17151B041 ML17151B042 ML17151B043 ML17151B044 ML17151B045 ML17151B046 ML17151B052 ML17151B053 ML17151B055 ML17151B057 ML17151B058 ML17151B060 ML17151B061 ML17151B062 ML17151B063 ML17151B064 ML17151B065 ML17151B066 ML17151B068 ML17151B071 ML17151B072 ML17151B073 ML17151B074 ML17151B075 ... further results
References
WO 17-0045
Download: ML17151B057 (2)

Text

Form APF-05-003-01, Rev. 2 A ' ASSIGNED DISCIPLINE:

Mechanical DESIGN DOCUMENT CHANGE NOTICE DOCUMENT NUMBER M-663-00017 A OTHER DOCUMENTS AFFECTED BY THIS CHANGE: NONE OTHER DDCN'S REQUIRED TO IMPLEMENT CHANGE: NONE REASON FOR CHANGE: Incorporate changes per CCP 14714. Cable tray 115U5A94 now contains a PFSSD cable so clarification is needed since this cable tray is in the heat affected zone for some penetrations.

PREPARED BY: DATE: 11/20/2014 Verifier Qualification will be to the same requirement as the parent document VERIFIED BY: APPROVED BY: DC RELEASE: DESCRIPTION OF CHANGE: 02/07/2015 DATE: DATE: 02/19/2015 Kay L Smith Released by Document Services.

Release Date: 2015.03.26 08:23:46 -05'00' On page B 13-66 ofB 13-88, make the following changes: Fire Area (Side 1) A-16 INITIATING DOC. TYPE: N/A NO. N/A DCP/CCP NO 14714 REV. 0 REV. W05 SEQ. NO. 01 PAGE I OF 2

.. I R

1. <1:1, P'-'" . f::

0_1..

\ . ;:.:: . -. : g*s i-11\ ) 6 '::'! 7l . _.:P,:;,:::. ** .. /t;qNsf'-'3

.* *

• of ......

'IONAL 111 11111111111111\111\\\

Digitally signed by Brian R Fox Date: 2015.02.20 08:21:36 -06'00' RPE Certification For ASME Section III design specifications, refer to AP 05-004 for qualification requirements I. 24" Cable Tray 5U5A94 is within Heat Affected Zone. Further review determined that this cable tray is PFSSD. Document E-IF9910 provides the basis for acceptance.

Fire Area (Side 2) A-5 1. 24" Cable Tray 5U5A94 is within Heat Affected Zone. Further review determined that this cable tray is PFSSD. Document E-IF9910 provides the basis for acceptance.

.----------------------------------------------------

---

Form APF-05-003-01, Rev. 0 i_ ' ASSIGNED DISCIPLINE:

Mechanical DESIGN DOCUMENT CHANGE NOTICE DOCUMENT NUMBER M-663-00017A On page B 13-69 ofB 13-88, make the following changes: Fire Area (Side 1) A-16 INITIATING DOC. TYPE: N/A NO. N/A DCP/CCP NO 14714 REV. 0 REV. wos SEQ. NO. 01 PAGE 2 OF 2 1. 24" Cable Tray 5U5A94 is within Heat Affected Zone (1/2" clearance to pipe strut clamp). Further review determined that this cable tray is PFSSD. Document E-1F991 0 provides the basis for acceptance.

Fire Area (Side 2) A-5 1. 24" Cable Tray 5U5A94 is within Heat Affected Zone (3-1/2").

Further review determined that this cable tray is PFSSD. Document E-1F9910 provides the basis for acceptance.