Text

SPS Unit 2 ISI Summary Rept for 1997 Refueling Outage
	ML18151A286
Person / Time
Site:	Surry
Issue date:	01/26/1998
From:	; VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.)
To:	;
Shared Package
ML18151A287	List: ML18151A286; ML18153A217;
References
	NUDOCS 9801300051
	Download: ML18151A286 (182)
	v • d • e

{{#Wiki_filter:Attachment 1 Surry Power Station Unit 2 lnservice Inspections Examination Summary and Abstract of Examinations

                  *-------......,I, 9801300051 980126              '

PDR ADOCK 05000281 G PDR

Attachment 1 Page 1 of 29 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner __V_i_r_gim_"a_E_l_ec_t_n_*c_an_d_P_o_w_e_r_C_o_m_p=--an---'-y_,_5_00_0_D_om_im_"o_n_B_l_v_d....c.,_G_l_e_n_All_e_n'--,V_A_2_3_0_6_0_ _ _ _ _ _ _ _ _ __

(Name and Address of Owner)

2. Plant ___Su_rry_P_o_w_e_r_S_ta_ti_*_on_,_5_5_7_0_H_o_g_I_sl_an_d_R_o_a_d_,_Surry__ , _v_A_2_3_8_83_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

(Name and Address of Plant)

3. Plant Unit _______2____ 4. Owner Certificate of Authorization (if required) ___N_A_ _ _ _ __

5. Commercial Service Date 05/0ll73 6. National Board Number for Unit _N_A _ _ _ _ _ _ _ _ _ _ _ __

7. Components Inspected Manufacturer Component or Manufacturer or Installer State or National Appurtenance or Installer Serial No. Province No. Board No.

Steam Generator Westinghouse Tampa Division 2972 VA-58227 6817 2-RC-E-lB Steam Generator Westinghouse Tampa Division 2973 VA58228 6818 2-RC-E-lC Reactor Coolant Westinghouse 494 NA NA Pumn 2-RC-P-lC Pressurizer Westinghouse Tampa Division 1071 VA 58225 6816 2-RC-E-2 ILOop ~top vruve uarllilg NA NA NA 2-RC-MOV-2595 Letdwn Ht Exchanger Joseph Oats & Sons, Inc. 1674-1 VA59648 309 2-CH-E-2 I~eru IDJ ection Commercial J<'ilters Corporation NA NA NA Filter 2-CH-FL-4A Seal lnj ection Commercial Filters Corporation NA NA NA Filter 2-CH-FL-4B Class 1/2 Piping Southwest Fabricating Company NA NA NA ILlass J.U, ~oumwest .l!aoncaung Lompany NA NA NA Component Supports Note: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8\li in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/88) This form (E00029) may be obtained from the Order Dept., ASME, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300.

FORM NIS-1 (Back)

8. Examination Dates _06_/_0_7/_9_6_ _ _ _ _ _ _ _ to 10/30/97 Second Period (5-10 5-10-01)

9. Inspection Period Identification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

10. Inspection Interval Identification ___Thu.ui._.rd.__T..._nwte..cv ...awl-1(,-,.5::;-1'""0cc.-9"-'4L.-:.. . ,;5-:.. 1.,.,0c=.,-0"'4"')_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

11. Applicable Edition of Section XI _1_9_8_9 _ _ _ _ _ _ _ _ _ Addenda _N_o_n_e_ _ _ _ _ _ _ __

June 9, 1997, Revision 8

12. Date/Revision of Inspection Plan - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan.

See Attachment 1, Pages 1 through 5 of Abstract of Examinations Performed See Attachment 1, Pages 1 through 18 of Abstract of System Pressure Tests

14. Abstract of Results of Examinations and Tests.

See Attachment 1, Examination Summary, Pages land 2

15. Abstract of Corrective Measures.

None performed or required We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section XI. Certificate of Authorization No. (if applicable) _N_A_ _ _ _ _ _ _ _ _ _ Expiration Date . . :N:..c.A:_c__ _ _ _ _ _ _ _ __ Virginia Elect. & Power Co. r.- _A/. J J Date Signed - - - - - - - - - - - - - - By &ld7Jl.tvJ~~ Owner CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by Hartford S B T & I Co of

   .......,H=a~rt"'fo=r=d~,C~T_ _ _ _ _ _ _ _ _ _ have inspected the components described in this Owner's Report during the period

__ 6!_7_19_6_ _ _ _ _ _ _ _ to 10/30/97 , and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                                   /JQ l,,LdL, YJ:~'-"

1

                                                  ~            - -fh--                                                                  NB 7933, VA 883 Commissions - - - - - - - - - - - - - - - - - - - -

Inspector's Signatu/re National Board, State, Province, and Endorsements D~-------~'~,--~--199~

Attachment I Page 2 of 29 Serial No.: 97-709 Docket No.: 50-281 Examination Summary Virginia Electric and Power Company Surry Power Station Unit 2 1997 Refueling Outage 3rd Interval, 2nd Period Introduction This report covers inservice examinations and tests of Class 1 and Class 2 components, piping and component supports that were conducted at Surry Power Station Unit 2 from June 7, 1996 through October 30, 1997. The examinations were conducted to meet the requirements of ASME Section XI, 1989 Edition, of the ASME Boiler and Pressure Vessel Code. Examination procedures were approved prior to the performance of the examinations. Certification documents relative to personnel, equipment and materials were reviewed and determined to be satisfactory. Inspections, witnessing and surveillance of the examinations and related activities were conducted by personnel from the Hartford Steam Boiler Inspection and Insurance Company, One State Street, Hartford, Connecticut 06102 (Mr. Robert Smith), and Surry techni-cal staff. Limitations Some of the arrangements and details of the piping systems and components were designed and fabricated before the access and examination requirements of ASME Section XI of the 1989 Code could be applied. Consequently, some examinations are limited or not practical due to geometric configuration or accessibility. Generally these limitations exist at fitting to fitting joints, such as elbow to tee, elbow to valve, reducer to valve, and where integrally welded attachments, lugs and supports preclude access to some part of the examination area. These limitations some-times preclude ultrasonic coupling or access for the required scan length or surface examination. Page 1 of 2

Attachment I Page 3 of 29 Serial No.: 97-709 Docket No.: 50-281 Examinations Examinations were conducted to review as much of the examination zones as was practical within geometric, metallurgical and physical limitations. When the required ultrasonic examination volume or area could not be examined 100%, the. examination method was evaluated and alternate beam angles or methods were consid-ered in an attempt to achieve the maximum examination volume. In the case of surface examinations where full coverage could not be achieved, an alternate component was considered for examination. However, where 100% examination was not possible the examination was considered to be a partial and so noted on the examination report. Where the reduction in coverage was 10% or greater, per Code Case N-460, a subsequent relief request will be provided by separate correspondence. Results Examinations of components, piping and component supports result-ed in no items being reported on the basis of procedure reporting criteria. Analytical Evaluation Analytical evaluation(s) of examination results (Volumetric and/or Surface examinations): None required or performed. Evaluation Analyses Evaluation analyses of examination results (Visual Examinations) None required or performed. Statement of Interval Status Virginia Electric and Power Company has completed 33.5 percent of the second period examinations and 42 percent of the interval examinations. Page 2 of 2

Attachment I Page 4 of 29 Serial No.: 97-709 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC and IWF Sect XI Sect XI Sect XI Exam Exam Drawing Number Mark No. Line No. Class Category Item Method Date Remarks 11548-WMKS-01 OOG1 2-WFPD-H006 14"-WFPD-117-601 2A F-A F1 .20 VT-3 10/16/97 11548-WMKS-01 OOG1 2-WFPD-H009 14"-WFPD-117-601 2A F-A F1 .20 VT-3 10/21/97 11548-WMKS-01 OOG1 H001-1 14"-WFPD-117-601 2A C-C C3.20 MT 10/16/97 11548-WMKS-01 OOG1 H001-2 14"-WFPD-117-601 2A C-C C3.20 MT 10/16/97 11548-WMKS-01 OOG1 H005-1 14"-WFPD-117-601 2A C-C C3.20 MT 10/16/97 11548-WMKS-01 OOG1 H005-2 14"-WFPD-117-601 2A C-C C3.20 MT 10/16/97 11548-WMKS-0103A2-1 1-39L 30"-SHP-101-601 2A C-F-2 C5.52 UT/MT 10/20/97 11548-WMKS-0103A2-2 1-31 L 30"-SHP-102-601 2A C-F-2 C5.52 UT/MT 10/19/97 11548-WMKS-0117A1-1 2-RH-HSS-019 14"-RH-101-1502 1A TS3.2 TS4.17 VT-3 10/10/97 A1 11548-WMKS-0117A1-1 2-RH-HSS-020 14"-RH-101-1502 1A TS3.2 TS4.17 VT-3 10/10/97 A1 11548-WMKS-011 SL 1 2-WCMU-H017 6"-WCMU-106-151 3A F-A F1.30 VT-3 10/6/97 11548-WMKS-011 SL 1 H017-1 6"-WCMU-106-151 3A D-B 02.20 VT-3 10/6/97 548-WMKS-0122K1-1 1-01 BC 6"-RC-318-1502 1A B-J 89.31 UT/PT 10/20/97 548-WMKS-0122L 1 2-SI-HSS-025 12"-Sl-245-1502 1A TS3.2 TS4.17 VT-3 10/10/97 11548-WMKS-0123M1 0-01 12"-CS-101-153 2A C-F-1 C5.11 UT/PT 10/17/97 11548-WMKS-0123M1 0-02 12"-CS-101-153 2A C-F-1 C5.11 UT/PT 10/17/97 11548-WMKS-0123M1 0-06 12"-CS-101-153 2A C-F-1 C5.11 UT/PT 10/15/97 11548-WMKS-0124A 1 1-07 6"-RC-338-1502 1A B-J B9.11 UT/PT 10/11/97 11548-WMKS-0124A 1 1-08 6"-RC-338-1502 1A B-J B9.11 UT/PT 10/11/97 11548-WMKS-0124A 1 2-01DM 6"-RC-337-1502 1A B-F 85.40 UT/PT 10/15/97 11548-WMKS-0124A 1 2-07 6"-RC-337-1502 1A B-J 89.11 UT/PT 10/11/97 11548-WMKS-0124A 1 2-08 6"-RC-337-1502 1A B-J 89.11 UT/PT 10/11/97 11548-WMKS-0124A 1 2-RC-HSS-186 3"-RC-335-1502 1A TS3.2 TS4.17 VT-3 10/8/97 11548-WMKS-0124A1 2-RC-SV-2551 A 6"-RC-339-1502 1A B-M-2 812.50 VT-3 10/22/97 11548-WMKS-0124A 1 2-RC-SV-2551 C 6"-RC-337-1502 1A B-G-2 87.70 VT-1 10/3/97 11548-WMKS-0124A 1 3-01 DM 6"-RC-339-1502 1A B-F 85.40 UT/PT 10/15/97 11548-WMKS-0124A1 3-08 6" -R C-339-1502 1A B-J 89.11 UT/PT 10/11/97 1548-WMKS-0124A1 4-01DM 4" -R C-334-1502 1A B-F 85.40 UT/PT 10/15/97 548-WMKS-0125A 1 1-01 BC 4"-RC-314-1502 1A B-J B9.31 UT/PT 10/20/97 11548-WMKS-0125A 1 1-07 4"-RC-314-1502 1A B-J 89.11 UT/PT 10/20/97 Page 1 of 5

Attachment I Page 5 of 29 Serial No.: 97-709 Docket No.; 50-281 Abstract of Examinations Performed IWB, IWC and IWF Sect XI Sect XI Sect XI Exam Exam Drawing Number Mark No. Line No. Class Category Item Method Date Remarks 11548-WMKS-0125A 1 2-RC-HSS-100 4"-RC-315-1502 1A TS3.2 TS4.17 VT-3 10/10/97 11548-WMKS-0125A 1 2-RC-HSS-107 4"-RC-315-1502 1A TS3.2 TS4.17 VT-3 10/10/97 A1 11548-WMKS-0127C 1 2-S1-H008 8"-Sl-214-152 2F F-A F1.20 VT-3 10/8/97 11548-WMKS-0127C2 2-12 10"-Sl-348-153 2A C-F-1 C5.11 UT/PT 10/9/97 11548-WMKS-012781 2-CH-H003 8"-CH-317-152 2F F-A F1.20 VT-3 10/7/97 11548-WMKS-012782 2-S1-H027 8"-Sl-170-153 2F F-A F1.20 VT-3 10/17/97 11548-WM KS-012782 2-S1-H037 1O"-Sl-206-153 2F F-A F1 .20 VT-3 10/7/97 11548-WM KS-2018A5 3-20 14"-WFPD-109-601 2A C-F-2 C5.51 UT/MT 10/12/97 11548-WMKS-CH-11 1-10 3" -C H-303-1503 2A C-F-1 C5.21 UT/PT 10/14/97 11548-WMKS-CH-18 0-08 3"-CH-371-1503 2A C-F-1 C5.21 UT/PT 10/14/97 11548-WMKS-CH-18 0-09 3"-CH-371-1503 2A C-F-1 C5.21 UT/PT 10/14/97 11548-WMKS-CH-18 0-10 3"-CH-371-1503 2A C-F-1 C5.21 UT/PT 10/7/97 548-WMKS-CH-18 2-CH-H003 3"-CH-371-1503 2A F-A F1 .20 VT-3 10/16/97 548-WMKS-CH-24 0-02 2"-CH-322-1503 2A C-F-1 C5.30 PT 10/13/97 11548-WMKS-CH-24 0-03 2"-CH-322-1503 2A C-F-1 C5.30 PT 10/13/97 11548-WMKS-CH-24 0-29 3"-CH-321-1503 2A C-F-1 C5.21 UT/PT 10/3/97 11548-WMKS-CH-24 0-30 3"-CH-321-1503 2A C-F-1 C5.21 UT/PT 10/3/97 11548-WMKS-CH-24 2-CH-H002A 3"-CH-322-1503 2A F-A F1.20 VT-3 10/16/97 11548-WMKS-CH-25 2-CH-H216 3"-CH-311-1503 2A F-A F1 .20 VT-3 10/7/97 11548-WMKS-CH-E-2 1-01 2-CH-E-2 2A C-A C1.20 UT 10/7/97 28"-56" 11548-WMKS-CH-E-2 1-02 2-CH-E-2 2A C-A C1.10 UT 10/7/97 28"-56" 11548-WMKS-CH-E-2 2-CH-H001 2-CH-E-2 2A F-A F1 .40 VT-3 10/7/97 11548-WMKS-CH-E-2 2-CH-H002 2-CH-E-2 2A F-A F1 .40 VT-3 10/7/97 11548-WMKS-CH-E-2 2-CH-H003 2-CH-E-2 3A F-A F1 .40 VT-3 10/7/97 11548-WMKS-CH-E-2 2-CH-H004 2-CH-E-2 3A F-A F1 .40 VT-3 10/7/97 11548-WMKS-CH-E-2 H003-1 2-CH-E-2 3A D-A 01.20 VT-3 10/7/97 11548-WMKS-CH-E-2 H004-1 2-CH-E-2 3A D-A D1 .20 VT-3 10/7/97 11548-WMKS-CH-FL-4A H001-1 2-CH-FL-4A 2A C-C C3.10 Surface 1/6/97 48-WMKS-CH-FL-4B 1-02 2-CH-FL-4B 2A C-A C1.10 UT 1/17/97 0"-11" 548-WMKS-RC-1024 1-01 2"-CH-393-1502 1A B-J B9.40 PT 10/17/97 Page 2 of5

Attachment I Page 6 of 29 Seriai No.: 97-709 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC and IWF Sect XI Sect XI Sect XI Exam Exam Drawing_Number Mark No. Line No. Class Category Item Method Date Remarks 11548-WMKS-RC-11-1 1-05DM 29"-RC-304-2501 R 1A B-F B5.70 UT/PT 10/8/97 p 11548-WMKS-RC-11-1 1-06DM 31"-RC-305-2501 R 1A B-F B5.70 UT/PT 10/8/97 p 11548-WMKS-RC-11-1 1-09 31"-RC-305-2501 R 1A B-J B9.11 UT/PT 10/19/97 11548-WMKS-RC-11-1 1-18 31 "-RC-305-2501 R 1A B-JB 9.12 UT/PT 10/8/97 11548-WMKS-RC-11-1 1-19 31 "-RC-305-2501 R 1A B-J B9.12 UT/PT 10/8/97 11548-WMKS-RC-11Z1 1-01 BC 2"-RC-357-1502 1A B-J B9.32 PT 10/8/97 11548-WMKS-RC-11Z1 1-05 2"-RC-357-1502 1A B-J B9.40 PT 10/8/97 11548-WMKS-RC-11 Z1 1-06 2"-RC-357-1502 1A B-JB 9.40 PT 10/8/97 11548-WMKS-RC-11Z1 1-07 2"-RC-357-1502 1A B-J B9.40 PT 10/8/97 11548-WMKS-RC-11 Z1 1-20 2"-RC-356-1502 1A B-J B9.40 PT 10/23/97 11548-WMKS-RC-11Z1 1-21 2"-RC-356-1502 1A B-J B9.40 PT 10/23/97 11548-WMKS-RC-11Z2 1-01 BC 2"-RC-499-1502 1A B-J B9.32 PT 10/8/97 11548-WMKS-RC-11Z2 1-07 2"-RC-499-1502 1A B-J B9.40 PT 10/8/97 548-WM KS-R C-11 Z2 1-08 2"-CH-309-1503 1A B-J B9.40 PT 10/8/97 11548-WMKS-RC-11Z2 2-RC-H001 2"-RC-499-1502 1A F-A F1 .40 VT-3 10/20/97 11548-WMKS-RC-11Z3 1-06 2"-CH-395-1502 1A B-J B9.40 PT 10/9/97 11548-WMKS-RC-11Z3 1-07 2"-CH-395-1502 1A B-J B9.40 PT 10/9/97 11548-WMKS-RC-11Z3 1-08 2"-CH-395-1502 1A B-J B9.40 PT 10/9/97 11548-WMKS-RC-11Z3 1-09 2"-CH-395-1502 1A B-J B9.40 PT 10/9/97 11548-WMKS-RC-11 Z3 Flange "A" 2" -C H-395-1502 1A B-G-2 B7.50 VT-1 1017/97 11548-WMKS-RC-2 1-01 BC 3"-RC-416-1502 1A B-J B9.32 PT 10/8/97 11548-WMKS-RC-2A 2-27BC 1 "-RC-360-1502 1A B-J B9.32 PT 10/11/97 11548-WMKS-RC-6Z 2-RC-FE-2480 2"-RC-345-1502 1A B-G-2 B7.50 VT-1 1017/97 11548-WMKS-RC-7Z 2-RC-FE-2481 2"-RC-346-1502 1A B-G-2 B7.50 VT-1 1017/97 11548-WMKS-RC-E-1 A.2 2-RC-HSS-138 NA 2A TS3.2 TS4.17 VT-3 10/10/97 11548-WMKS-RC-E-1 A.2 2-RC-HSS-140 NA 2A TS3.2 TS4.17 VT-3 10/10/97 11548-WMKS-RC-E-1 B.1 2-02 2-RC-E-1 B 2A C-A C1.30 UT 10/11/97 141"-284" 11548-WMKS-RC-E-1 B.1 2-03 2-RC-E-1 B 2A C-A C1.10 UT 10/11/97 141"-282" 548-WMKS-RC-E-1 B.1 2-05 2-RC-E-1 B 2A C-A C1 .10 UT 10/14/97 141"-282" 11548-WMKS-RC-E-1 B.1 CL-MANWAY 2-RC-E-1 B 1A B-G-2 B7.30 VT-1 10/14/97 Page 3 of5

Attachment I Page 7 of 29 Serial No.: 97-709 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC and IWF Sect XI Sect XI Sect XI Exam Exam _prawing Number Mark No. Line No. Class Category Item Method Date Remarks 11548-WMKS-RC-E-1 B.1 HL-MANWAY 2-RC-E-1 B 1A B-G-2 B7.30 VT-1 10/14/97 11548-WMKS-RC-E-1 B.2 2-RC-1-02ANIR 2-RC-E-1 B 1A B-0 B3.140 VT-1 10/20/97 11548-WMKS-RC-E-1 B.2 2-RC-1-02BNIR 2-RC-E-1 B 1A B-0 B3.140 VT-1 10/20/97 11548-WMKS-RC-E-1 C.2 2-09 2-RC-E-1 C 2A C-B C2.21 UT/MT 10/18/97 16"-33" 11548-WM KS-R C-E-2 1-03 2-RC-E-2 1A B-B B2.12 UT 10/12/97 6"-12" 11548-WMKS-RC-E-2 1-04 2-RC-E-2 1A B-B B2.11 UT 10/12/97 145"-290" 11548-WMKS-RC-E-2 1-08 2-RC-E-2 1A B-K B10.10 UT 10/12/97 0"-193" 11548-WMKS-RC-E-2

Heater Elements 2-RC-E-2 1A B-E B4.20 VT-2 10/30/97 11548-WMKS-RC-E-2 Lower Sample Nozzles 2-RC-E-2 1A B-E B4.11 VT-2 10/30/97 11548-WMKS-RC-MOV2595 NUTS-1-13 27 "-RC-309-2501 R 1A B-G-1 B6.230 VT-1 10/14/97 11548-WMKS-RC-MOV2595 STUDS-1-13 27 "-RC-309-2501 R 1A B-G-1 B6.210 UT 10/14/97 548-WMKS-RC-P-1 A.1 2-RC-FRAME 2-RC-P-1A 1A F-A F1 .40 VT-3 10/8/97 1548-WMKS-RC-P-1 C.1 2-RC-P-1 C 2-RC-P-1 C 1A B-L-2 B12.20 VT-3 10/15/97 11548-WMKS-RC-P-1 C.2 B-09 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/14/97 11548-WMKS-RC-P-1 C.2 B-10 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/14/97 11548-WMKS-RC-P-1 C.2 B-11 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/14/97 11548-WMKS-RC-P-1 C.2 B-12 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/14/97 11548-WMKS-RC-P-1 C.2 B-13 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 B-14 2-RC-P-1C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 B-15 2-RC-P-1C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 B-16 2-RC-P-1C 1A B-G-1 B6.180 UT 10/16/97 11548-WMKS-RC-P-1 C.2 B-17 2-RC-P-1C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 B-18 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/16/97 11548-WMKS-RC-P-1 C.2 B-19 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 B-20 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/16/97 548-WMKS-RC-P-1 C.2 B-21 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/14/97 548-WMKS-RC-P-1 C.2 B-22 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/16/97 Page 4 of5

Attachment I Page 8 of 29 Serial No.: 97-709 Docket No. : 50-281 Abstract of Examinations Performed IWB, IWC and IWF Sect XI Sect XI Sect XI Exam Exam _p_rawing Number Mark No. Line No. Class Category Item Method Date Remarks 11548-WMKS-RC-P-1 C.2 B-23 2-RC-P-1 C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 B-24 2-RC-P-1C 1A B-G-1 B6.180 UT 10/13/97 11548-WMKS-RC-P-1 C.2 FLANGE 2-RC-P-1C 1A B-G-1 B6.190 VT-1 10/15/97 11548-WMKS-RC-P-1 C.2 LSHB 2-RC-P-1 C 1A B-G-2 B7.60 VT-1 10/13/97 11548-WMKS-RC-R-1.2 1-01 2-RC-R-1 1A B-A B1 .40 UT/MT 10/14/97 179"-358" 11548-WM KS-S l-12A 1-04 3" -S 1-346-1503 2A C-F-1 C5.21 UT/PT 10(7/97 11548-WMKS-Sl-12A 1-05 3"-Sl-346-1503 2A C-F-1 C5.21 UT/PT 10{7!97 11548-WMKS-Sl-12A 2-05 3"-Sl-272-1503 2A C-F-1 C5.21 UT/PT 10/3/97 11548-WMKS-Sl-12A 2-06 3"-Sl-272-1503 2A C-F-1 C5.21 UT/PT 10/3/97 11548-WMKS-Sl-35 1-25 2"-Sl-274-1502 2A C-F-1 C5.30 PT 10/23/97 11548-WMKS-Sl-9 0-01 3"-Sl-290-1503 2A C-F-1 C5.21 UT/PT 10/3/97 11548-WMKS-Sl-9 0-02 3"-Sl-290-1503 2A C-F-1 C5.21 UT/PT 10/3/97 1548-WMKS-WAPD-5 2-WAPD-H004 6"-WAPD-150-601 3A F-A F1 .30 VT-3 10/17/97 A 1 = Reexamination of a component that required corrective measures during a previous examination. P = Partial examination, (reduction in coverage is greater than 10% as allowed by Code Case N-460) relief will be requested by separate correspondence. Page 5 of 5

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-086C-1-4 RVLIS TRAINS "A & B" OUTSIDE CTMT 2 C-H C7.30 11/26/96 2-SPM-086C-1-4 RVLIS TRAINS "A & B" OUTSIDE CTMT 2 C-H C7.70 11/26/96 2-SPM-086C-2-3 RVLIS TRAINS "A & B" OUTSIDE CTMT 2 C-H C7.30 11/26/96 2-SPM-086C-2-3 RVLIS TRAINS "A & B" OUTSIDE CTMT 2 C-H C7.70 11/26/96 2-SPM-088A-2-3 NON REGENERATIVE HEAT EXCHANGER 2-CH-E-2 2 C-H C7.10 11/27/96 2-SPM-088A-2-3 NON REGENERATIVE HEAT EXCHANGER 2-CH-E-2 2 C-H C7.30 11/27/96 2-SPM-088A-2-3 NON REGENERATIVE HEAT EXCHANGER 2-CH-E-2 2 C-H C7.70 11/27/96 2-SPM-088B-2-3 CHARGING ALTERNATE HEADER 2 C-H C7.30 11/27/96 2-SPM-088B-2-3 CHARGING ALTERNATE HEADER 2 C-H C7. 70 11/27/96 2-SPM-088C-1-8 CHARGING ALTERNATE HEADER 2 C-H C7.30 11/27/96 2-SPM-088C-1-8 CHARGING ALTERNATE HEADER 2 C-H C7.70 11/27/96 2-SPM-088C-2-7 CHARGING ALTERNATE HEADER 2 C-H c7.3D 11/27/96 2-SPM-088C-2-7 CHARGING ALTERNATE HEADER 2 C-H C7.70 11/27/96 2-SPM-089A-3-4 CHARGING ALTERNATE HEADER 2 C-H C7.30 11/27/96 2-SPM-089A-3-4 CHARGING ALTERNATE HEADER 2 C-H C7.70 11/27/96 2-SPM-084A-1-5 RWST COOLERS HDR 2 C-H C7.30 12/02/96 2-SPM-084A-1-5 RWST COOLERS HDR 2 C-H C7.70 12/02/96 2-SPM-088B-2-2 RWST CROSSTIE 2 C-H C7.30 12/11/96 2-SPM-088B-2-2 RWST CROSSTIE 2 C-H C7.70 12/11/96 2-SPM-088B-2-4 "A" LOW HEAD SAFETY INJECT ION PUMP CROSS-TIE TO 2 C-H C7.30 12/11/96 CHARGING PUMPS t:I C/.1 l"d > 0 (0 "' <+

                                                                                                               "11      ()q '1" I><'!"'* ( 0 " '

(0"'

                                                                                                               '1" t-' (0   §
                                                                                                                            "

Page 1 of 18 Z 12: 0 a, 0 0 t-t, ~

                                                                                                                            '1"
                                                                                                               "" N IJl(CCCH 0...,

I I N-.., 0, 0 t-' (0

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-0888-2-4 '~" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H C7.70 12/11/96 CHARGING PUMPS 2-SPM-089A-1-5 RWST CROSSTIE 2 C-H c7.30 12/11/96 2-SPM-089A-1-5 RWST CROSSTIE 2 C-H C7.70 12/11/96 2-SPM-089A-2-7 "A" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H C7.30 12/11/96 CHARGING PUMPS 2-SPM-089A-2-7 "A" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H c7.70 12/11/96 CHARGING PUMPS 2-SPM-082A-3-2 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C7.30 01/02/97 2-SPM-082A-3-2 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C7.70 01/02/97 2-SPM-0888-2-5 CHARGING PUMPS 2-CH-P-1A,1B, AND 1C 2 C-H C7.30 01/02/97 2-SPM-0888-2-5 CHARGING PUMPS 2-CH-P-1A,1B, AND 1C 2 C-H C7.50 01/02/97 2-SPM-0888-2-5 CHARGING PUMPS 2-CH-P-1A,1B, AND 1C 2 C-H c7.70 01/02/97 2-SPM-0888-2-7 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C7.30 01/02/97 2-SPM-0888-2-7 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C7.70 01/02/97 2-SPM-0888-1-3 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H c7.10 01/13/97 PUMP 2-SPM-0888-1-3 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H C7.30 01/13/97 PUMP 2-SPM-0888-1-3 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H c7.70 01/13/97 PUMP 2-SPM-0886-2-6 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H c7.30 01/13/97 PUMP 2-SPM-0888-2-6 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H C7.70 01/13/97 PUMP Page 2 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-089A-2-8 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H C7.30 01/13/97 PUMP 2-SPM-089A-2-8 SEAL RETURN HEADER AND SUCTION LINE TO CHARGING 2 C-H C7.70 01/13/97 PUMP 2-SPM-0888-1-11 MISC CHARGING 2-CH-FCV-21138 2 C-H C7.30 01/13/97 2-SPM-0888-1-11 MISC CHARGING 2-CH-FCV-21138 2 C-H C7.70 01/13/97 1-SPM-082A-1-6 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.30 01/14/97 1-SPM-082A-1-6 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.70 01/14/97 2-SPM-082A-3-1 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.30 01/14/97 2-SPM-082A-3-1 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.70 01/14/97 2-SPM-082A-3-3 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.30 01/14/97 2-SPM-082A-3-3 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.70 01/14/97 2-SPM-088A-1-1 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.30 01/14/97 2-SPM-088A-1-1 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.70 01/14/97 2-SPM-088A-2-2 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.30 01/14/97 2-SPM-088A-2-2 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.70 01/14/97 2-SPM-0888-1-4 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.10 01/14/97 2-SPM-0888-1-4 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.30 01/14/97 2-SPM-0888-1-4 VOLUME CONTROL TANK LETDOWN HEADER 2 C-H C7.70 01/14/97 2-SPM-0888-2-1 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.30 01/22/97 2-SPM-0888-2-1 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.70 01/22/97 2-SPM-088C-1-4 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.30 01/22/97 Page 3 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-088C-1-4 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.70 01/22/97 2-SPM-088C-2-1 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.30 01/22/97 2-SPM-088C-2-1 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.70 01/22/97 2-SPM-089A-3-3 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H C7.30 01/22/97 2-SPM-089A-3-3 CHARGING HEADER AND SEAL INJECTION FILTER 2 C-H c7.70 01/22/97 2-SPM-084A-1-2 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST 2 C-H c7.30 02/10/97 2-SPM-084A-1-2 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST 2 C-H C7.70 02/10/97 2-SPM-089A-1-4 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST 2 C-H C7.30 02/10/97 2-SPM-089A-1-4 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST 2 C-H C7.70 02/10/97 2-SPM-089A-1-8 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST 2 C-H c7.30 02/10/97 2-SPM-089A-1-8 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST 2 C-H C7.70 D2/10/97 1-SPM-079D-1-3 BORIC ACID TRANSFER PUMP 1-CH-P-2C 2 C-H C7.30 02/18/97 1-SPM-079D-1-3 BORIC ACID TRANSFER PUMP 1-CH-P-2C 2 C-H c7.70 02/18/97 1-SPM-088A-1-4 BORIC ACID TRANSFER PUMP 1-CH-P-2C 2 C-H C7.30 02/18/97 1-SPM-088A-1-4 BORIC ACID TRANSFER PUMP 1-CH-P-2C 2 C-H c7.50 02/18/97 1-SPM-088A-1-4 BORIC ACID TRANSFER PUMP 1-CH-P-2C 2 C-H c7.70 02/18/97 2-SPM-084A-1-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H C7.10 02/19/97 2-SPM-084A-1-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H C7.30 02/19/97 2-SPM-084A-1-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H C7.70 02/19/97 2-SPM-084A-2-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H c7.30 02/19/97 2-SPM-084A-2-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H c7.70 02/19/97 Page 4 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-084A-3-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H c7.30 02/19/97 2-SPM-084A-3-1 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H C7. 70 02/19/97 2-SPM-084A-3-2 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H C7.30 02/19/97 2-SPM-084A-3-2 REFUELING WATER STORAGE TANK AND ASSOCIATED PIPE 2 C-H c7.70 02/19/97 2-SPM-084A-3-3 RWST/CATCROSS TIE PIPING 2 C-H c7.30 02/19/97 2-SPM-084A-3-3 RWST/CATCROSS TIE PIPING 2 C-H C7.70 02/19/97 2-SPM-084A-3-4 CAT UNDERGROUND PIPING 2 C-H c7.30 02/19/97 2-SPM-084A-3-4 CAT UNDERGROUND PIPING 2 C-H C7. 70 02/19/97 2-SPM-084A-3-5 REFUELING WATER CHEMICAL ADDITION TANK 2 C-H c7.10 02/19/97 2-SPM-084A-3-5 REFUELING WATER CHEMICAL ADDITION TANK 2 C-H c7.30 02/19/97 2-SPM-084A-3-5 REFUELING WATER CHEMICAL ADDITION TANK 2 C-H c7.70 02/19/97 2-SPM-084A-1-4 2-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H c7.30 05/06/97 2-SPM-084A-1-4 2-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H c7.70 05/06/97 2-SPM-084A-2-2 2-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.30 05/06/97 2-SPM-084A-2-2 2-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.50 05/06/97 2-SPM-084A-2-2 2-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.70 05/06/97 2-SPM-084A-2-3 2-CS-P-1B SUCTION AND DISCHARGE PIPING 2 C-H C7.30 05/06/97 2-SPM-084A-2-3 2-CS-P-1B SUCTION AND DISCHARGE PIPING 2 C-H c7.50 05/06/97 2-SPM-084A-2-3 2-CS-P-1B SUCTION AND DISCHARGE PIPING 2 C-H C7.70 05/06/97 2-SPM-088A-1-2 BORATE FOR END OFCORE LIFE 2 C-H C7.30 05/07/97 2-SPM-088A-1-2 BORATE FOR END OFCORE LIFE 2 C-H C7.70 05/07/97 Page 5 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-079D-1-4 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.30 05/07/97 1-SPM-079D-1-4 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.70 05/07/97 1-SPM-088A-1-5 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.10 05/07/97 1-SPM-088A-1-5 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.30 05/07/97 1-SPM-088A-1-5 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.50 05/07/97 1-SPM-088A-1-5 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.70 05/07/97 1-SPM-088A-2-3 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.30 05/07/97 1-SPM-088A-2-3 BORIC ACID TRANSFER PUMP 1-CH-P-ZD 2 C-H C7.70 05/07/97 1-SPM-088A-1-6 BORIC ACID LINES TOCHARGING PUMPS 2 C-H C7.30 05/08/97 1-SPM-088A-1-6 BORIC ACID LINES TOCHARGING PUMPS 2 C-.H C7.70 05/08/97 2-SPM-088B-1-5 BORIC ACID LINES TOCHARGING PUMPS 2 C-H C7.30 05/08/97 2-SPM-088B-1-5 BORIC ACID LINES TOCHARGING PUMPS 2 C-H C7.70 05/08/97 2-SPM-064A-1-3 A S/G MAIN STEAM INSIDECTMT 2 C-H C7.10 10/06/97 2-SPM-064A-1-3 A S/G MAIN STEAM I NSIDECTMT 2 C-H C7.30 10/06/97 2-SPM-064A-1-3 A S/G MAIN STEAM INSIDECTMT 2 C-H C7.70 10/06/97 2-SPM-064A-2-3 B S/G MAIN STEAM INSIDECTMT 2 C-H C7. 10 10/06/97 2-SPM-064A-2-3 B S/G MAIN STEAM I NSIDECTMT 2 C-H C7.30 10/06/97 2-SPM-064A-2-3 B S/G MAIN STEAM INSIDECTMT 2 C-H C7.70 10/06/97 2-SPM-064A-3-3 C S/G MAIN STEAM INSIDECTMT 2 C-H C7.10 10/06/97 2-SPM-064A-3-3 C S/G MAIN STEAM INSIDECTMT 2 C-H C7.30 10/06/97 l;j Cl:l "a> 2-SPM-064A-3-3 C S/G MAIN STEAM INSIDECTMT 2 C-H C7.70 10/06/97 0 CD ~ tT

                                                                                                       " 11
                                                                                                       ),;'

CD ~

                                                                                                                 °' ""c, I-'* CD ~
                                                                                                       <Tr'r'§ Page 6 of 18                                    Z Z _..      CD 0    0    O  ~
                                                                                                       ....      H, ""

Ln CC N H a -..i co I I N-.., o, a

                                                                                                       .... co

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-068A-1-2 MAIN FEEDWATER TO 11 811 S/G 2 C-H C7.30 10/06/97 2-SPM-068A-1-2 MAIN FEEDWATER TO 11 8 11 S/G 2 C-H C7.70 10/06/97 2-SPM-068A-1-3 MAIN FEEDWATER TO 11 C11 S/G 2 C-H C7.30 10/06/97 2-SPM-068A-1-3 MAIN FEEDWATER TO 11 c11 S/G 2 C-H C7.70 10/06/97 2-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP2-RS-P-2A 2 C-H C7.30 10/06/97 2-SPM-0848-2-2 OUTSIDE RECIRCULATION SPRAY PUMP2-RS-P-2A 2 C-H Cl.SO 10/06/97 2-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP2-RS-P-2A 2 C-H C7.70 10/06/97 2-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP2-RS-P-2B 2 C-H C7.30 10/06/97 2-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP2-RS-P-2B 2 C-H C7.50 10/06/97 2-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP2-RS-P-2B 2 C-H Cl.70 10/06/97 2-SPM-087A-2-5 LETDOWN HEADER 2 C-H C7.30 10/06/97 2-SPM-087A-2-5 LETDOWN HEADER 2 C-H Cl.70 10/06/97 2-SPM-088A-2-1 LETDOWN HEADER 2 C-H C7.30 10/06/97 2-SPM-088A-2-1 LETDOWN HEADER 2 C-H C7.70 10/06/97 2-SPM-088C-1-5 CHARGING TO REGENERATIVE HEAT EXCHANGER 2 C-H C7.30 10/06/97 2-SPM-088C-1-5 CHARGING TO REGENERATIVE HEAT EXCHANGER 2 C-H C7.70 10/06/97 2-SPM-088C-1-9 LETDOWN HEADER 2 C-H C7.10 10/06/97 2-SPM-088C-1-9 LETDOWN HEADER 2 C-H Cl.30 10/06/97 2-SPM-088C-1-9 LETDOWN HEADER 2 C-H C7.70 10/06/97 2-SPM-088C-2-3 REACTORCOOLANT PUMP SEAL INJECTION LINES 2 C-H C7.30 10/06/97 2-SPM-088C-2-3 REACTORCOOLANT PUMP SEAL INJECTION LINES 2 C-H C7.70 10/06/97 Page 7 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. Xi Zone Description Class Category Item Date Remarks 2-SPM-088C-2-5 REACTORCOOLANT PUMP "B" SEAL RETURN LINE 2 C-H c7.30 10/06/97 2-SPM-088C-2-5 REACTORCOOLANT PUMP 11 811 SEAL RETURN LINE 2 C-H c7.70 10/06/97 2-SPM-088C-2-6 REACTORCOOLANT PUMP 11 C11 SEAL RETURN LINE 2 C-H C7.70 10/06/97 2-SPM-088C-2-6 REACTORCOOLANT PUMP "C" SEAL RETURN LINE 2 C-H C7.30 10/06/97 2-SPM-089A-2-1 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 10/06/97 2-SPM-089A-2-1 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 10/06/97 2-SPM-089B-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.10 10/06/97 2-SPM-089B-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 10/06/97 2-SPM-089B-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 10/06/97 2-SPM-089B-1-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 10/06/97 2-SPM-089B-1-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 10/06/97 2-SPM-089B-2-2 LOOP "B" SAFETY INJECTION ACCUMULATOR 2 C-H C7.10 10/06/97 2-SPM-089B-2-2 LOOP 11 811 SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 10/06/97 2-SPM-089B-2-2 LOOP 11 811 SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 10/06/97 2-SPM-089B-2-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H c7.30 10/06/97 2-SPM-089B-2-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 10/06/97 2-SPM-089B-3-2 LOOP "C" SAFETY INJECTION ACCUMULATOR 2 C-H C7.10 10/06/97 2-SPM-089B-3-2 LOOP 11 C SAFETY INJECTION ACCUMULATOR 11 2 C-H C7.30 10/06/97 2-SPM-089B-3-2 LOOP "C" SAFETY INJECTION ACCUMULATOR 2 C-H c7.70 10/06/97 2-SPM-089B-3-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 10/06/97 2-SPM-089B-3-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 10/06/97 Page 8 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-124A-2-2 11811 S/G BLOWDOWN 2 C-H C7.10 10/06/97 2-SPM-124A-2-2 "B" S/G BLOWDOWN 2 C-H C7.30 10/06/97 2-SPM-124A-2-2 11911 S/G BLOWDOWN 2 C-H C7.70 10/06/97 2-SPM-124A-3-2 11c11 S/G BLOWDOWN 2 C-H C7.10 10/06/97 2-SPM-124A-3-2 11c11 S/G BLOWDOWN 2 C-H c7.30 10/06/97 2-SPM-124A-3-2 11c11 S/G BLOWDOWN 2 C-H C7.70 10/06/97 2-SPM-086C-1-3 RVLIS TRAIN IIAII INSIDECTMT 2 C-H C7.70 10/06/97 2-SPM-086C-1-3 RVLIS TRAIN IIAII INSIDECTMT 2 C-H C7.30 10/06/97 2-SPM-086C-1-5 RVLIS TRAIN 11 8 11 INSIDECTMT 2 C-H C7.30 10/06/97 2-SPM-086C-1-5 RVLIS TRAIN "B" INSIDECTMT 2 C-H C7.70 10/06/97 2-SPM-086C-2-2 RVLIS TRAIN 11 8 11 INSIDECTMT 2 C-H C7.30 10/06/97 2-SPM-086C-2-2 RVLIS TRAIN 11811 INSIDECTMT 2 C-H C7.70 10/06/97 2-SPM-089B-2-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.70 10/07/97 2-SPM-089B-2-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 10/07/97 2-SPM-089B-1-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.70 10/07/97 2-SPM-089B-1-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 10/07/97 2-SPM-089B-3-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 10/07/97 2-SPM-089B-3-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.70 10/07/97 2-SPM-087A-2-2 RHR TO RWST PIPING 2 C-H C7.30 10/15/97 2-SPM-087A-2-2 RHR TO RWST PIPING 2 C-H C7.70 10/15/97 t:, r:ll >,j 0 n, Ill

ct 2-SPM-084B-1-3 11 811 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.30 10/17/97 " Ii 0, ct Pl' I-'* (I) Ill (I) Ill " ct"""" [ Page 9 of 18 z z -.J (I) 0 0 O ):j

                                                                                                            ....     '"" ct u, <o N H 0    -.J (0 I    I N    -.J
                                                                                                            "'0
                                                                                                            .... (0

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-084B-1-3 11g11 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.50 10/17/97 2-SPM-084B-1-3 11911 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.70 10/17/97 2-SPM-084B-1-4 "A" INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.30 10/17/97 2-SPM-084B-1-4 IIAII INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.50 10/17/97 2-SPM-084B-1-4 11A11 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.70 10/17/97 2-SPM-089A-2-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 10/21/97 2-SPM-089A-2-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 10/21/97 2-SPM-089A-3-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 10/21/97 2-SPM-089A-3-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 10/21/97 2-SPM-089B-1-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 10/21/97 2-SPM-089B-1-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 10/21/97 2-SPM-089B-2-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 10/21/97 2-SPM-089B-2-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 10/21/97 2-SPM-089B-3-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 10/21/97 2-SPM-089B-3-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 10/21/97 2-SPM-089B-4-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 10/21/97 2-SPM-089B-4-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 10/21/97 1-SPM-090C-1-10 CONTAINMENT VACUUM PUMP "B" 2 C-H C7.30 10/27/97 1-SPM-090C-1-10 CONTAINMENT VACUUM PUMP "B" 2 C-H C7. 70 10/27/97 1-SPM-090C-1-6 POST ACCIDENT GASEOUS WASTE SAMPLE 2 C-H C7.30 10/27/97 C Cll "'1 > 1-SPM-090C-1-6 POST ACCIDENT GASEOUS WASTE SAMPLE 2 C-H C7.70 10/27/97 0 (1) ~ t1" c, 11 00 t1"

,;' ,... (1) ~

(1) ~ t1" t-' ... [ z z

Page 10 of 18 0 0 0) 0 (1)

1

                                                                                                           ....      t-+, t1" l/1 CC NH 0 ...... (0 I I N.....,

0) 0

                                                                                                           ...  (0

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-090C-1-7 HYDROGEN ANALYZER103 RETURN LINE 2 C-H C7.30 10/27/97 1-SPM-090C-1-7 HYDROGEN ANALYZER103 RETURN LINE 2 C-H C7.70 10/27/97 1-SPM-090C-1-8 HYDROGEN ANALYZER203 RETURN LINE 2 C-H C7.30 10/27/97 1-SPM-090C-1-8 HYDROGEN ANALYZER203 RETURN LINE 2 C-H C7.70 10/27/97 1-SPM-090C-1-9 CONTAINMENT VACUUM PUMP "A" 2 C-H C7.30 10/27/97 1-SPM-090C-1-9 CONTAINMENT VACUUM PUMP "A" 2 C-H C7.70 10/27/97 2-SPB-006A-1-1 CONTAINMENT PURGE AIR SUPPLY 2 C-H C7.30 10/27/97 2-SPB-006A-1-1 CONTAINMENT PURGE AIR SUPPLY 2 C-H C7.70 10/27/97 2-SPB-006A-1-2 CONTAINMENT PURGE AIR EXHAUST 2 C-H C7.30 10/27/97 2-SPB-006A-1-2 CONTAINMENT PURGE AIR EXHAUST 2 C-H C7.70 10/27/97 2-SPM-066A-2-1 CONTAINMENT AIR REMOVAL 2 C-H C7.30 10/27/97 2-SPM-066A-2-1 CONTAINMENT AIR REMOVAL 2 C-H C7.70 10/27/97 2-SPM-0758-2-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.30 10/27/97 2-SPM-0758-2-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.70 10/27/97 2-SPM-0758-2-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.30 10/27/97 2-SPM-0758-2-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.70 10/27/97 2-SPM-075C-1-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.30 10/27/97 2-SPM-075C-1-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.70 10/27/97 2-SPM-075C-1-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.30 10/27/97 2-SPM-075C-1-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.70 10/27/97 2-SPM-082A-2-5 RESIDUAL HEAT REMOVAL/SAMPLE 2 C-H C7.30 10/27/97 Page 11 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-082A-2-5 RESIDUAL HEAT REMOVAL/SAMPLE 2 C-H C7.70 10/27/97 2-SPM-082A-2-6 PRESSURIZER RELIEF TANK SAMPLE 2 C*H C7.30 10/27/97 2-SPM-082A-2-6 PRESSURIZER RELIEF TANK SAMPLE 2 C-H C7.70 10/27/97 2-SPM-083A-2-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H C7.30 10/27/97 2-SPM-083A-2-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H C7.70 10/27/97 2-SPM-0838-1-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H C7.30 10/27/97 2-SPM-0838-1-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H C7.70 10/27/97 2-SPM-0838-3-2 HRSS WASTE TANK PUMP DISCHARGE 2 C-H C7.30 10/27/97 2-SPM-0838-3-2 HRSS WASTE TANK PUMP DISCHARGE 2 C-H C7.70 10/27/97 2-SPM-085A-1-3 CONTAINMENT VACUUM EJECTOR 2 C-H C7.30 10/27/97 2-SPM-085A-1-3 CONTAINMENT VACUUM EJECTOR 2 C-H C7.70 10/27/97 2-SPM-085A-2-1 CONTAINMENT VACUUM PUMP 11 8 11 2 C-H C7.30 10/27/97 2-SPM-085A-2-1 CONTAINMENT VACUUM PUMP 11 8 11 2 C*H C7. 70 10/27/97 2-SPM-085A-2-2 CONTAINMENT VACUUM PUMP "A" 2 C-H C7.30 10/27/97 2-SPM-085A-2-2 CONTAINMENT VACUUM PUMP "A" 2 C-H C7.70 10/27/97

2-SPM-0868-2-1 PRIMARY GRADE WATER INTO CONTAINMENT 2 C-H C7.30 10/27/97 2-SPM-0868-2-1 PRIMARY GRADE WATER INTO CONTAINMENT 2 C-H C7.70 10/27/97 2-SPM-1308-1-1 PARTICULATE RAD MONITOR SAMPLE FROM CONTAINMENT 2 C-H C7.30 10/27/97 2-SPM-1308-1-1 PARTICULATE RAD MONITOR SAMPLE FROM CONTAINMENT 2 C-H C7.70 10/27/97 2-SPM-1308-1-2 PARTICULATE RAD MONITOR SAMPLE INTO CONTAINMENT 2 C*H C7.30 10/27/97 2-SPM-1308-1-2 PARTICULATE RAD MONITOR SAMPLE INTO CONTAINMENT 2 C-H C7.70 10/27/97 Page 12 of 18

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2*SPM-068A-1*1 MAIN FEEDWATER TO HAIi S/G 2 C*H C7.30 10/30/97 2*SPM-068A-1*1 MAIN FEEDWATER TO 11A11 S/G 2 C*H C7.70 10/30/97 2*SPM*082A*2*1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2*SPM*082A-2*1 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM*082A*2*2 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2*SPM*082A-2-2 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2*SPM-082A*2*3 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2*SPM*082A-2*3 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2*SPM-082A-2-4 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2*SPM*082A-2-4 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM*086A-1-1 REACTOR COOLANT SYSTEM 8-P 815.30 10/30/97 2-SPM-086A-1*1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-086A*1*1 REACTOR COOLANT SYSTEM 8-P 815.60 10/30/97 2*SPM-086A-1-1 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2*SPM-086A*1*2 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-086A-1-2 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM*086A-1-3 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-086A-1*3 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2-SPM-086A*1-4 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM*086A-1-4 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 t:11:/l "d > 2*SPM-086A-1-5 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 0 n "' a. 11 <1"

                                                                                                                  "' <'"

Is' .... "'"'

                                                                                                        "'
                                                                                                        <1"  I--' N §
                                                                                                             "'      n Page 13 of 18                                    z0 z0 ...    "'

O i::J

                                                                                                        ....      Hi <1" Ln<DNH 0   "'   (D I    I N '-'

0, 0

                                                                                                        ... (D

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-086A-1-5 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.30 10/30/97 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.60 10/30/97 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15 .70 10/30/97 2-SPM-086A-2-2 REACTOR COOLANT SYSTEM B-P B15.30 10/30/97 2-SPM-086A-2-2 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-2-3 REACTOR COOLANT SYSTEM B-P B15.30 10/30/97 2-SPM-086A-2-3 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-2-4 REACTOR COOLANT SYSTEM B-P B15.30 10/30/97 2-SPM-086A-2-4 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-2-5 REACTOR COOLANT SYSTEM B-P B15.30 10/30/97 2-SPM-086A-2-5 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.10 10/30/97 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.30 10/30/97 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.60 10/30/97 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 2-SPM-086A-3-2 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-086A-3-2 REACTOR COOLANT SYSTEM B-P B15 .70 10/30/97 t:I C/l '"tl > 2-SPM-086A-3-3 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 0 CD ~ t"T "Ii°""" i>I' I-'* CD ~ CD ~ n t"1" r' N § Page 14 of 18 Z ZN CD

                                                                                                   ....

0 0 u, <O N H O t:l t-+,"" 0 ..., (0 I I N ._, ex, 0

                                                                                                   ...  (0

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-086A-3-3 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM-086A-3-4 REACTOR COOLANT SYSTEM 8-P B15.50 10/30/97 2-SPM-086A-3-4 REACTOR COOLANT SYSTEM B-P 815.70 10/30/97 2-SPM-086A-3-5 REACTOR COOLANT SYSTEM 8-P B15.50 10/30/97 2-SPM-086A-3-5 REACTOR COOLANT SYSTEM B-P 815.70 10/30/97 2-SPM-086A-3-6 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-086A-3-6 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2-SPM-086B-1-1 REACTOR COOLANT SYSTEM 8-P 815.20 10/30/97 2-SPM-0868-1-1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-0868-1-1 REACTOR COOLANT SYSTEM B-P 815 .70 10/30/97 Z-SPM-0868-1-2 REACTOR COOLANT SYSTEM 8-P B15.50 10/30/97 2-SPM-086B-1-2 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 2-SPM-0868-1-3 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-0868-1-3 REACTOR COOLANT SYSTEM 8-P B15 .70 10/30/97 2-SPM-0868-1-4 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-0868-1-4 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2-SPM-087A-1-1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-087A-1-1 REACTOR COOLANT SYSTEM 8-P B15 .70 10/30/97 2-SPM-087A-2-3 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-087A-2-3 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 0 Cll 'd > 2-SPM-087A-Z-4 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 0 "' I>> t1" Is',..."'

                                                                                                   "t1 O'O t1" I>>
                                                                                                   "'I>>           "

tTr"tjlf Page 15 of 18 z 0z 0 O

                                                                                                                  "'~
                                                                                                   ....      I'+, t1" u,coNH

a. -....J <e I I N ._,

ex, 0

                                                                                                   .... (0

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-087A-2-4 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 2-SPM-088B-1-2 SEAL RETURN HEADER 2 C-H c7.30 10/30/97 2-SPM-0888-1-2 SEAL RETURN HEADER 2 C-H C7.70 10/30/97 2-SPM-088C-1-1 REACTOR COOLANT SYSTEM B-P 815.50 10/30/97 2-SPM-088C-1-1 REACTOR COOLANT SYSTEM B-P B15 .70 10/30/97 2-SPM-088C-1-2 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-088C-1-2 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM-088C-1-3 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-088C-1-3 REACTOR COOLANT SYSTEM B-P 815. 70 10/30/97 2-SPM-088C-1-6 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-088C-1-6 REACTOR COOLANT SYSTEM B-P B15.40 10/30/97 2-SPM-088C-1-6 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 2-SPM-088C-1-7 SEAL RETURN HEADER 2 C-H c7.30 10/30/97 2-SPM-088C-1-7 SEAL RETURN HEADER 2 C-H c7.70 10/30/97 2-SPM-088C-2-2 SEAL RETURN HEADER 2 C-H C7.30 10/30/97 2-SPM-088C-2-2 SEAL RETURN HEADER 2 C-H c7.70 10/30/97 2-SPM-088C-2-4 REACTOR COOLANT PUMP IIAII SEAL RETURN LINE 2 C-H c7.30 10/30/97 2-SPM-088C-2-4 REACTOR COOLANT PUMP 11A11 SEAL RETURN LINE 2 C-H c7.70 10/30/97 2-SPM-088C-2-8 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 2-SPM-088C-2-8 REACTOR COOLANT SYSTEM 8-P B15.60 10/30/97 tlUl"tji> 2-SPM-088C-2-8 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 0 "' 0,, Cl 11 "' c1" c1" Is" I-'*"' "'

                                                                                                            "' "'

c1" c"' ~ Cl

                                                                                                                       § Page 16 of 18                                    z0 0z    O
                                                                                                                       "'~
                                                                                                           .... H, c1" u, <C NH 0  .... "'

I I N .._.

                                                                                                           "'0 c"'"'

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-089B-1-1 REACTOR COOLANT SYSTEM B-P 815.50 10/30/97 2-SPM-089B-1-1 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2-SPM-0898-2-1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-089B-2-1 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM-089B-3-1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-0898-3-1 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM-089B-4-1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-089B-4-1 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM-124A-1-2 "A" S/G8LOWD0WN 2 C-H C7 .10 10/30/97 2-SPM-124A-1-2 11A11 S/G8LOWD0WN 2 C-H C7.30 10/30/97 2-SPM-124A-1-2 11A11 S/G8LOWD0WN 2 C-H C7.70 10/30/97 2-SPM-089B-1-3 REACTOR COOLANT SYSTEM 8-P 815 .70 10/30/97 2-SPM-089B-1-3 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-089B-2-3 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2-SPM-0898-2-3 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-089B-3-3 REACTOR COOLANT SYSTEM 8-P 815.70 10/30/97 2-SPM-089B-3-3 REACTOR COOLANT SYSTEM B-P 815.50 10/30/97 2-SPM-086C-1-2 REACTOR COOLANT SYSTEM B-P B15.70 10/30/97 2-SPM-086C-1-2 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 2-SPM-086C-2-1 REACTOR COOLANT SYSTEM 8-P B15.70 10/30/97 t::l C/l 'ti> 2-SPM-086C-2-1 REACTOR COOLANT SYSTEM 8-P 815.50 10/30/97 0 n ct> I>>

                                                                                                        '1    °"   t1" t1" l>s' ,.... ct> I>>

ct> I>> n t1" "°'z N § Page 17 of 18 la: 0 0 u, ct> O ::l

                                                                                                   ....        H, t1" u,   (0    N H 0    ..... (0 I    I N -..J 0, 0
                                                                                                   ""   (0

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 2-SPM-086C-1-1 REACTOR COOLANT SYSTEM B-P B15 .70 10/30/97 2-SPM-086C-1-1 REACTOR COOLANT SYSTEM B-P B15.50 10/30/97 Page 18 of 18 L_

Attachment I Page 27 of 29 Serial No.: 97-709 Docket No.: 50-281 Abstract of Examinations Snubber Program During the Unit 2 Refueling Outage in October, 1997, there were 55 snubbers selected for functional testing and seal replacement. No failure was found. Visual Inspection was not required due to the extended inspection interval per T.S. 4.17. Informal walkdown of the snubbers re-vealed no visual failures. All snubbers that were removed for functional testing and/or seal replacements were functionally tested prior to reinstallation and visually inspected prior to Unit 2 startup. Page 1 of 1

Attachment I Page 28 of 29 Serial No.: 97-709 Docket No.: 50-281 Abstract of Examinations Eddy Current Examinations of Nonferromagnetic Steam Generator Tubing Inservice examination was performed on steam generator "B" In Steam Generator "B", all except two available tubes were inspected full length with bobbin probes. Two row one tubes (Rl-C34, Rl-C35) were plugged due to restrictions that would not allow the 0.720" bobbin probe to pass through. These two tubes did allow passage of a 0.680 probe. A 683 tube sample was tested with Rotating Pancake Coil (RPC) probes in the hot leg transition (TSH +/- 3") region. A twenty tube sample of the row 1 U-bends was performed with a RPC probe. Supplemental examinations were also performed using bobbin and RPC probes where additional confirmatory or other data was desired. The following tubes were preventively plugged: Row Column 1 34 1 35 37 59 36 69 40 70 This Steam Generator contains a total of seven plugged tubes. Tubes with indications noted during this outage are as follows: Row Column Indication Location Remarks 1 34 RST plugged 1 35 RST plugged 37 59 21 AV3 plugged 32 69 12 AV2 36 69 20 AV2 plugged 40 70 25 AV3 plugged Page 1 of 2

Attachment I Page 29 of 29 Serial No.: 97-709 Docket No. : 50-281 GLOSSARY OF TERMS

1. ROW, COL COLUMN" Tube identifier numbers an X-Y coordinate system.

2. IND INDICATION Character codes and numerics that represent the analysis results of the data for that tube, e.g., SAA, 25%, etc.

3. LOCN LOCATION The location in the tube of the INDICATION called.

4. RST RESTRICTED - Indicates that the probe listed in the record would not physically pass the location specified.

5. 18 A number in the indication column shows the%

through wall depth of the indication. Page 2 of 2.

Attachment 2 Surry Power Station Unit 2 lnservice Inspections Repairs and Replacements NIS-2 Forms _J

Attachment 2 Page 1 of 78 Serial No.: 97-709 Docket No.: 50-281 Repair and Replacements Repair and replacements completed during this refueling outage were performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code, 1989 Edition. The following paragraphs and the attached NIS-2 forms represent those repairs and replacements performed on Class 1 and Class 2 systems: RR# 96-088, replace fasteners on valve 2-CS-46. This replacement was performed under work order 00331892-01, and completed on 6-13-96. RR# .96-101, replace fasteners on 2-CH-E-6B. This replacement was performed under work order 00344553-04, and completed on 7-10-96. RR# 96-102, replace existing nuts and install capnuts to allow injection of leak seal material on 2-FW-10. This replacement was performed under work order 00344933-01, and completed on 7-25-96. RR# 96-106, repair leak at socket welded connection on line 2"- CH-306-602. This repair was performed under work order 00347318-01, and completed on 8-16-96. RR# 96-107, replace fasteners on 2-8I-TV-202A. This replacement was performed under work order 00347789-01, and completed on 8-21-96. RR# 96-108, install temporary support. This replacement was performed under work order 00347318-04, and completed on 9-19-96. RR# 96-115, replace coupling and pipe on line 2"-CH-306-602. This replacement was performed under work order 00350205-01, and completed on 9-13-96. RR# 96-134, replace 2" stainless steel pipe on 2-CH-PP-2.00. This replacement was performed under work order 00351999-01, and completed on 12-20-96. RR# 96-135, install new piping supports. This replacement was performed under work order 00351999-05, and completed on 12 96. RR# 96-136, replace 2" stainless steel check valve 2-CH-211. This replacement was performed under work order 00351868-01, and completed on 12-28-96. Page 1 of 6

Attachment 2 Page 2 of 78 Serial No.: 97*709 Docket No.: 50-281 RR# 96-141, replace fasteners on flange 2-CH-RV-2203. This replacement was performed under work order 00351999-08, and completed on 12-31-96. RR# 96-145, replace fasteners on 2-RC-HCV-2557B. This replace-ment was performed under work order 00356388-01, and completed on 12-16-96. RR# 96-146, replace main flange bolts on 2-RC-P-lC. This re-placement was performed under work order 00356385-01, and com-pleted on 12-20-96. RR# 96-148, replace two flange nuts on 2"-CH-316-1502. This replacement was performed under work order 00356385-03, and completed on 12-20-96. RR# 97-001, repair weld leak on line 2"-CH-385-602. This repair was performed under work order 00357401-03, and completed on 1 97. RR# 97-002, replace relief valve 2-CH-RV-2203. This replacement was performed under work order 00357192-01, and completed on 10-21-97. RR# 97-003, repair weld leak on 2-CH-191. This repair was performed under work order 00357612-01, and completed on 1-10-97. RR# 97-004, replace fasteners on 2-RC-HCV-2244. This replacement was performed under work order 00357822-01, and completed on 1-24-97. RR# 97-053, add additional welds to support. This repair was. performed under work order 00354999-01, and completed on 10 97. RR# 97-077, install new body to bonnet gasket on valve 2-CS-15. This replacement was performed under work order 00342506-01, and completed on 10-20-97. RR# 97-114, replace body to bonnet bolts (one at a time) on valve 2-CS-25. This replacement was performed under work order 003601-82-01, and completed on 5-1-97. RR# 97-128, replace spring can hanger 2-MS-RV-201C. This re-placement was performed under work order 00364363-03, and com-pleted on 6718-97. RR# 97-131, repair weld leak on 2-CH-HCV-2200C. This repair was performed under work order 00351999-13, and completed on 6-27-97. Page 2 of 6

Attachment 2 Page 3 of 78 Serial No.: 97-709 Docket No.: 50-281 RR# 97-132, modify supports 2-CH-HCV-2200B and 2-CH-HCV-2200C. This replacement was performed under work order 00351999-16, and completed on 6-27-97. RR# 97-134, replace valve 2-CS-MOV-202A. This replacement was performed under work order 00336464-03, and completed on 10 97. RR# 97-135, replace valve 2-CS-MOV-202B. This replacement was performed under work order 00336464-03, and completed on 10 97. RR# 97-141, replace flow orifice 2-CH-R0-20RLD1. This replace-ment was performed under work order 00351999-02, and completed on 10-21-97. RR# 97-142, replace valve body 2-CH-HCV-2200A. This replacement was performed under work order 00357847-03, and completed on 8-21-97. RR# 97-143, replace flow orifice 2-CH-R0-20RLD3. This replace-ment was performed under work order 00351999-03, and completed on 10-21-97. RR# 97-144, replace valve body'2-CH-HCV-2200B. This replacement was performed under work order 00357848-03, and completed on 10-21-97. RR# 97-145, replace flow orifice 2-CH-R0-20RLD2. This replace-ment was performed under work order 00351999-04, and completed on 10-21-97. RR# 97-146, replace valve body 2-CH-HCV-2200C. This replacement was performed under work order 00357850-03, and completed on 10-21-97. RR# 97-147, replace pipe 2 11 -CH-532-602. This replacement was performed under work order 00351999-12, and completed on 10 97. RR# 97-148, fabricate, modify and install pipe supports, 2-CH-Supports. This replacement was performed under work order 00351999-11, and completed on 10-25-97. RR# 97-149, replace trim assemb'ly 2-RC-PCV-2456. This replace-ment was performed under work order 00357761-01, and completed on 10-24-97. RR# 97-150, replace trim assembly 2-RC-PCV-2455C. This replace-ment was performed under work order 00371357-01, and completed on 10-22-97. Page 3 of 6

Attachment 2 Page 4 of 78 Serial No.: 97-709 Docket No.: 50-281 RR# 97-151, inspect and repair valve 2-MS-182. This replacement was performed under work order 00369117-01, and completed on 10-8-97. RR# 97-153, inspect and repair valve 2-MS-176. This replacement was performed under work order 00367064-01, and completed on 10-8-97. RR# 97-155, replace fasteners on 2-FW-10. This replacement was performed under work order 00344933-02, and completed on 10 97. RR# 97-157, replace valve 2-MS-266. This replacement was per-formed under work order 00357265-01, and completed on 10-18-97. RR# 97-163, repair valve 2-CH-LCV-2460A. This replacement was performed under work order 00358378-01, and completed on 10 97. RR# 97-164, replace flange gasket 2-CH-FE-2180. This replacement was performed under work order 00365230-01, and completed on 10-13-97. RR# 97-165, inspect and repair valve 2-CH-HCV-2200C. This re-placement was performed under work order 00357850-01, and com-pleted on 10-24-97. RR# 97-166, inspect and repair valve 2-CH-HCV-2200A. This re-placement was performed under work order 00357847-01, and com-pleted on 10-24-97. RR# 97-167, inspect and repair valve 2-CH-HCV-2200B. This re-placement was performed under work order 00357848-01, and com-pleted on 10-24-97. RR# 97-168, overhaul valve 2-MS-PCV-202A. This replacement was performed under work order 00361386-01, and completed on 10 97. RR# 97-169, overhaul valve 2-MS-PCV-202B. This replacement was performed under work order 00353099-01, and completed on 10 97. RR# 97-173, replace pipe 14"-WFPD-117-601. This replacement was performed under work order 00363890-03, and completed on 10 97. RR# 97-174, cut, modify, and install piping for replacing valve 2-CS-MOV-202A. This replacement was performed under work order 00336464-01, and completed on 10-10-97. Page 4 of 6

Attachment 2 Page 5 of 78 Serial No.: 97-709 Docket No.: 50-281 RR# 97-175, cut, modify, and install piping for replacing valve 2-CS-MOV-202B. This replacement was performed under work order 00336465-01, and completed on 10-18-97. RR# 97-177, repair PORV 2-MS-RV-lOlA. This replacement was per-formed under work order 00365700-01, and completed on 9-26-97. RR# 97-178, remove safety valve 2-RC-SV-2551A for testing and reinstall. This replacement was performed under work order 00365793-01, and completed on 10-26-97. RR# 97-179, remove safety valve 2-RC-SV-2551B for testing and reinstall. This replacement was performed under work order 00365794-01, and completed on 10-23-97. RR# 97-180, remove safety valve 2-RC-SV-2551C for testing and reinstall. This replacement was performed under work order 00365795-01, and completed on 10-24-97. RR# 97-198, replace stud and nut on 2-SI-94. This replacement was performed under work order 00375533-01, and completed on 10-14-97. RR# 97-206, replace bonnet stud on 2-RC-MOV-2595. This replace-ment was performed under work order 00375948-01, and completed on 10-17-97. RR# 97-207, replace main flange gasket on 2-RC-P-lC. This re-placement was performed under work order 00356923-02, and com-pleted on 10-26-97. RR# 97-208, remove, install and restretch main flange bolts on 2-RC-P-lA. This replacement was performed under work order 003572-05-01, and completed on 10-21-97. RR# 97-209, repair valve 2-DG-TV-208A. This replacement was performed under work order 00368000-01, and completed on 10 97. RR# 97-212, install CRDM housing canopy seal clamp at penetration 19 on 2-RC-R-1. This replacement was performed under work order 00376203-01, and completed on 10-24-97. RR# 97-214, remove safety valve 2-MS-SV-204C for testing and reinstall. This replacement was performed under work order 00369714-01, .and completed on 10-26-97. RR# 97-215, replace fasteners on 2-MS-SV-205C. This replacement was performed under work order 00369715-01, and completed on 10-26-97. Page 5 of 6

Attachment 2 Page 6 of 78 Serial No.: 97-709 Docket No.: 50-281 RR# 97-216, replace fasteners on 2-MS-SV-202B. This replacement was performed under work order 00365797-01, and completed on 10-26-97. RR# 97-217, replace fasteners on 2-MS-SV-203B. This replacement was performed under work order 00365798-01, and completed on 10-26-97. RR# 97-218, replace fasteners on 2-MS-SV-204B. This replacement was performed under work order 00365799-01, and completed on 10-26-97. RR# 97-219, replace fasteners on 2-MS-SV-203C. This replacement was performed under work order 00369713-01, and completed on 10-26-97. RR# 97-220, replace fasteners on 2-MS-SV-202C. This replacement was performed under work order 00369712-01, and completed on 10-26-97. RR# 97-221, replace fasteners on 2-MS-SV-201C.

This replacement was performed under work order 00369711-01, and completed on 10-26-97 . .

RR# 97-222, replace fasteners on 2-MS-SV-201B. This replacement was performed under work order 00365796-01, and completed on 10-26-97. Page 6 of 6

Attachment 2 Page 7 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7 /31/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Neme 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet ______ o f - - - - - - - - - - - - - ~

Addre11 Surry Power Station Two Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

2. Plant Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00331892-0l, RR#96-088 Addre11 Repair Organization P.O. No., Job No., ate.

3. Work Performed by ___v_i_rg""i-*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol StaffiP _ _ _NA _ _ _ _ _ _ __

Name Authorization No. ________________ Same ae above Expiration Date ___NA _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Containment Spray

4. Identification of S y s t e m - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B31.l 55 NA N-1, N-7 5, (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 0 89 (bl Applicable Edition'of'Section XI Utilized fo~ 'R~pairs or RliplaceJ1ents'19

I*

s: Identification of Components Repaired or. Replaced and Re~lacilme~t co*inpon*ents

ASME

.*.*, *, I,\ / '** \ ' *'\*

Code

                                           "                                      National                                                 Repaired,     Stamped Name of                  Name of          Manufacturer                       Board                     Other           Year       Replaced,        (Yes Component              Manufactu~r           Serial No.                       **No.                Identification       Built   or Replacement or Nol

                                                              .*'.                       ,,.,,
                                                                                                                 ,.

I'l"I' Eng. Ht. # Studs Valves 510684 NA , 2-CS-46 NA Replacement No

                            '.                      'Ht. #
                                                                ;      ,,    ,.,    I,,

Nute Mackson, Inc. AH1393 NA 2-CS-46 NA Replacement No

,,

I

                                  ...                                  ,:    ,,,,          H

7 _ Description of Work _Replace bonnet studs and nuts.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi* Tes~ ,T~mp. °F NOTE: Supplemental sheets in form of lists,'sketclies, or drawings may be used, pr,ovi.ded* (1 I size is,8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet Is numbered and the number of sheets is recorded at the top* of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N. Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO # CNT-5182-95 (studs)*, CNT-529092 (nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A___________ Signed(].~.<< .Z-'Sr 4u(;.,111~ Date . X4r ,l/ ,19 ~ Owner o~O~s Deslgnae, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have !'3:ected the components described in this Owner's Report during the period to ~i:;!!z::..2 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ------+-/?..,,.,.          ...7f2

__.._C?.--'--"-+-r-J{-'-_e: __* _____ commissions _ _ _ _ _ _v_a_._8_8_3_ _ _ _ _ _ _ _ __ I ~ National Board, State, Province, and Endorsements

Attachment 2 Page 8 of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _10/8/96 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Ow ner - - - - - - - - - - - ------------

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant _ Surry

_ _ _ _Power ____ Station _ _ _ _ _ _ _ _ _ _ _ __ Two Unit-------------------- Name 5570 'Hog Island Rd., Surry, Va. 23883 W0#003445J3-04, RR#~6-101 Addre11 Repair Organization P.O. No., Job No., ate.

3. Work Performed by_.......v,..i._rg,..1..,*n"'i,..a..._,,,P.:::o.:awe""r"---------- Type Code Symbol Stamp _ _ _.;.;NA:..:...._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System ____c_h_a_r_g_i_ng_ _ _ _ _ _ _ _ _ _ _ _ _,.,...,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

53 1 1 7 5, (al Applicable Construction Code 1. 19~Edition,_N_A______ Addenda, __ N_-_'_N_-__ _ _ Code Case (bl Applicable Edition*of Section XI Utilizad;for Repairli.or Replaceriie;nts' 19

8 ~, * *, J. '

,,I U.

6. Identification of Components Repaired or Replab~d aiid Replacement Cotnponents ASME Code Na'tional Repaired, Stamped Name of . Name of Manufacturer Board .Other

Year Replaced, (Yes Component
Manu*facturer
Serial No: .. .... ,' No. ' Identification Built *or Replacement or Nol I;' Studs Mac~son, Inc. NA NA 2-CH-E-6B, NA Replacement No Nuts Mackson, Inc. NA NA .;?-CH-E-~B. NA Replacement No 1

7. Description of Work .,Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressu~e psi Tes~ Temp. °F NOTE: Supplemental sheets in form of lists, skirt~hes, or drawings may be used, provided, 111 size is 8% in. x 11 in., 12) informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet. is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtain.ed from the Order Dept., ASME¥, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

< I

FORM NIS-2 (Back) PO #**BNT-46765fr- (studs*-and nuts-)*

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable *Manufacture.r's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A___________ Signe 0 ~p

        ~~ Deslgnee, Title
                               ".AL/     .fl:'C                                  Dat e _ _.../Ar        Y

_""'"~---"-'------., 19 91, CERTIFICATE OF INSERVICE INSPECTION I, the undersigne{r holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of irginia and employed by HSBI and I Co* of Hartford, Ct. h~~ 79ected the components described in this Owner's Report during the period to 5l/9 2 * , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -------+-,,,,        /7)~--"""'~'~--,.~~*  __._____
                                                 .            commissions _ _ _ _ _ _v_a_.__        8 _8_3_ _ _ _ _ _ _ _ _ __
                      ~gnature                                                 National Board, State, Province, and Endorsements Dat.,_e_ ____._/__,D/.__!--1Ll'---_19 I    +             fb

Attachment 2 Page 9 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. ner _Virginia

______ Electric _ _ _ _ _and ___ Power ____ Co. _ _ __ Date _10/17 ____ /96 _ _ _ _ _ _ _ _ _ _ _ _ _ __ Ow Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00344933-0l, RR#96-102 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __y.._..ir...,a._.i..n.,i"'a'-"P""ow,,,,esaar"'---------- Type Code Symbol Stamp _ _ _.,NA"'--------

Neme NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _Nc:,;A'-------------- Addre1&

4. Identification of System ____F_e_e_d_w_a_t_e_r_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

831 ' 1 1 7

5. (a) Applicable Construction Code 1 9 ~ Edition,_N_A_ _ _ _ _ _ Addenda, __ N_-_'_N_-____ Ccrde Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Nuts NA NA NA 2-FW-10 NA Replaced No

Capnuts Team, Inc. Ht.#92778 NA 2-FW-10 NA Replacement No 7, Description of Work Remove existing nuts and install capnuts to allow injection of leak seal material.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BKI-489739

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data'Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________

          ~~ Designee, Title S i g n e d / I d . , ~ - .....     ~          .fl"_-r--

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne.d,., holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of virginia and employed by HSBI and I Co. of Hartford, Ct.

                                                                                           ~e . i?,~ected the components described in this Owner's Report during the period                        ?/lu/'fI   t./
                                                                              ,   to    ?-/ /DI J Y /                  '

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  --------""""'...-=/7)~.,,l<'..+-'-~"--:.L.:c*~-----Commissions _______v_a_.__                     B_B_3_ _ _ _ _ _ _ _ _ _ __

lns~ature National Board, State, Province, and Endorsements Date_ _ _ _ ~/~0+/;~7 7 __19 fb

Attachment 2 Page 10 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _10/8/96 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Ow ner - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 2. Surry Power Station Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00347318-01, RR#96-106 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_--"v.._;,.rg,1.i.1..1'n,...i.,.a...._.P,.o""w""eri....,.,_ _ _ _ _ _ _ __ Type Code Symbol Stamp _ ___J&l,.._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _. . .:. ;NA:..:. . _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System ____c_h_a_r_g_i_n_g_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code B31

1 19~Edition,_NA _ _ _ _ _ _. Addenda,_N_-i_,_N_-_7_ _ _ Code Case (b) Applicable Edition of Section XI Utilized.for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced .and Replacement Components

                                                                               ;
                                                                               '                                                                                         ASME Code National                                                 Repaired,    Stamped Name of                'Name of

Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 2"*Tee NA NA* NA 2"-CH-306-602 NA Repa:ired No

7. Description of Work Repair leak at socket welded connection. Code Case *N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D _Pressure ______ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and th is repair conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed C)~ ,/J

LfS.Z- ~ Date_.,_@,""-*-"A'-"Z-CL*.......w.r

_ _ _ _ _, 19 2k

          ~ : t n ~ D e s l g n e e , Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State
          .

or Province of Virginia and employed by HSBI and I Co.

of Hartford, Ct.

                                                                                           ~ve inspected the components described
                                                                                        ~I / ()I / 9 '7                        , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 883

  -------t~'"=-~~~*-~-,._.~~-~~-----Commissions _______v_a_.___ _ _ _ _ _ _ _ _ _ _ _ __

insi>ectoi*s Signature National Board, State, Province, and Endorsements Date_ _ ____.__/-=U-1-h'-,'IF---19 l 9b

Attachment 2 Page 11 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Ow ner _Virginia

______ Electric _ _ _ _ _ and ___ Power ____ Co. _ _ __ Date _10/8/96 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addreas

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit _Two _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00347789-01, RR#96-107 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_--"v...,i..._rg.;.1..,*ou.1..,*a..._..P,.o""w"'"er"----------- Type Code Symbol Stamp _ _ _.,NA~-------

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ __::cN:.:A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System ____s_a_f_e_t_y_In_J_*e_c_t_i_o_n_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

53 1. 1 5_5_Edition,_N_A_ _ _ _ _ _* Addenda, __ 1 7

5. (a) Applicable Construction Code 19_ N_-_'_N_-____ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 B9

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs Mackson, Inc. NA NA 2-SI-TV-202A NA Replacement No Nuts Mackson, Inc. NA NA 2-SI-TV-202A NA Replacement No

7. Description of Work Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), CNT-467064 (nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report" are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signeda~/ :-.t4/ IS;;r- Date _ _ ...~~..____,C...__ Oc""'* _ _ _ _ , 19 ';p O w n e r o ~ Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have izpected the components described

                                                                                        ~/;O, 97                             , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -------t:=,...___           7/1~

ld~~*_}1/UA,A/ ______ -77:.., v_-_ _ Commissions _ _ _ _ _ _ _Va.883 _ _ _ _ _ _ _ _ _ _ _ _ _ __ nspector'sSig~ National Board, State, Province, and Endorsements Date 10r!1'( I I 19 ?b

Attachment 2 Page 12 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date_l_0_/_1_7_/_9_6_ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd.,*Glen Allen, Va. 23060 Addre11s Surry Power Station Unit __ T_w_o_________________

2. P l a n t - - - - - - - - - - . , , . . , . . . . - - - - - - - - - - -

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00347318-04, RR#96-108 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_~JT:a,i;,;,;<;f:;i;;,i,.,.;;,i,a.._.:pp,.,.,.,,,.re.,.,.,__ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _....,._ _ _ _ _ __

Name Authorization No. _ _N_A _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ __,,cu.A,.___ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _--=cc:.:hc=e:.=m=-i-=-ca"'-1=-a:::n;a;d=-V:...:o:..:l:..:u:::m:.::e--=C-=-on:::::t.:cr=-o:::l=--------------------------

5. (a) Applicable Construction Code 83 1..1 19~Edition,_N_A_ _ _ _ _ _. Addenda, N-1, N-7 Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 sg

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of. Name of* " Manufacturer . Boera Other *veer .. .Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 3/4" Nuts A&G Eng. Lot#065823 NA Temp. Support NA Replacement No Ht. #

1/4" Plate 861048 NA NA Temp. Support NA Replacement No Ht. # 3/4" Threaded Rod 1-4055IV NA NA Temp. Support NA Replacement No Dubose Nat. Ht. # 2" Pipe Energy _Serv. 248612 NA 7'emp. Support NA Replacement No Ht. # 2 1/2" Pipe Hub, Inc. N07998 NA Temp. Support NA Replacement No Dubose Ht. #. 3/4" Plate Steel, Inc. B7219 NA Temp. Support NA Replacement No

7. Description of Work Install . tempora,;y support.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp, _ _ _ _ _ _° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in,, (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-493024 (2" pipe), CNT-523097 (1/4" plate), CNT-456221

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached (3/4" rod), SY-383500 (2 1/2" pipe), CSY-318000 (3/4" plate), SSY-391371 (3/4" nuts) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _ N_A_ _ _ _ _ _ _ _ _ __ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  ---------------------------,t----,---J;:=;----ha~ il)Spected the components described in this Owner's Report during the period                                       to    qLD/97                       , and state that to the best of my knowledge and belief, the Owne~ has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected wit.h this inspection.

                 ~           n             "ifr_                                            Va. 883
  -----1-~~--=---+!-.+J:-+-+~-1~'-"'c=-=---'-'_ _ _ _ commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

lnspacwi:,;Sig~ National Board, State, Province, and Endorsements Date

Attachment 2 Page 13 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date_l_0_/_1_7_/_9_6_ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address Surry Power Station Unit _T_w_o_________________

2. P l a n t - - - - - - - - - - : - : - - - - - - - - - - - -

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00350205-01, RR#96-115 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_-l/.'a.a,.;'rie<9;i;ib<'al4i.aa,....P.Pee,*,..,.,;oari;:....--------- Type Code Symbol StamP----1AA--------

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration-Date _ _......,....__ _ _ _ _ _ _ _ _ __ Address

4. Identification of System ____C.=;h::.e::;:m=:i:..::cc:;a:.=1--=an::.d=-.;Vc.:o:.:l:..::u::=m:.::e_c.=;.o::;:n:.:..:t:.:r:.::o:.=l'-------------------------

5. (a) Applicable Construction Code __B_3_i_._1_ _ _ _ 19~Edition,_N_A_ _ _ _ _ _- Addenda, N-1, N-7 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 a2

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of* Manufacturer Board Other Year Replaced,- (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Pipe NA NA NA 2"-CH-306-602 NA Replaced No Coupling NA NA NA 2"-CH-306-602 NA Replaced No Energy & Pipe Process Corp. Ht. # 7030 1 2"-CH-306-602 NA *Replacement No

      ,..._,,,.....,
               -
                     *--      n-*      M011 ---
                                                   ---       .,~                                 ?"-CH-306-602            NA         Renlacement      No

7. Description of Work Replace coupling and pipe Code case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-473562 (2" pipe), 39527 (2" coupling). DR# S-96-1454 was

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached previously written to document paperwork deficiency of coupling. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N _ A - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - - Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _ NA_ _ _ _ _ _ _ _ _ __ Signed<;;}.£... p_e-r<-: J:t_:r- (:2 Date-~"-<aal....i{"..--~L~2----, 19~2~6~- o w n ~ r ' s Designea, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,,,holdjng 13 valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

          .         v1rg1n1a                                                      HSBI and I Co.

or Province of and employed by of Hartford, Ct.

                                                                                          ~a)'e ~pected the components described in this Owner's Report during the period                                        to   ?j/0(17                         , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                            /77.<2 ':-Tl,~                                                   Va. 883
  --------~"'-"-bo-"=-'--'--~-fr'-~µ,<.-=.J'-""-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _~l~Oa.;-b~J_7~_19 I fb

Attachment 2 Page 14 of 78 ,i, Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addre11

2. Plant Surry Power Station Name 5570 Hog Island Rd., Surry,. Va. 23883 Unit ~.Z%:W0#00351999-0l, RR#96-134 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r.:;.g_in_1._*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stary}?---N_A--'--------

Name Authorization N o . - - - - - - . , . . - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _Charging _ _ _ _System

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.l 55 NA N-1, N-7 5, (a) Applicable Construction Code 19 _ _ . _Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ __ 8 9

6. Identification of Components Repaired or Replaced and Replacement Components I I I i

                                                                                                   '      ,*

ASME Code National Repaired, Stamped Name c;,f I I Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or Nol I McJunkin 2" Coupling Corporation NA NA 2-CH-PP-2.00 NA Replacement No Grinnell 3/8" Bolt Corporation NA NA 2-CH-PP-2.00 NA Replacement No 2" Pipe Hub Inc. NA NA 2-CH-PP-2.00 NA Replacement No Dubose Nationa 2" Tee Energy Srvc, I c. NA NA 2-CH-PP-2.00 NA Replacement No Dubose Nationa 2" Elbow Energy Srvc, I c. NA NA 2-CH-PP-2.00 NA Replacement No

7. Description of Work Replace 2" ss piping per .DCP. Co,~ CAs.i ;t/-1/1/;, pldlr)u~!:.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure Ci}"

Other D Pressure ______ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) mey be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# 95731 (2" Coupling"); SSY-325956 (3/8" Bolt Flange)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CSY-321292 (2" Pipe); CNT-537762 (2" Tee & Elbow) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ __ _ : : . N " ' A " - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. ----=N'-"A=-__________ Expiration Date _ _ _~N=A=----------- Signed Q ~£/~ :I"fr ~~4!#~ O w n e ~ s Designee, Title Date-~~.-,..b-------, 19 f', CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of _______H_a_r_t_f_o_r_d...c'-,--C_t_.__________.....,~ 7,,,------have ins~~ted the components described 77 in this Owner's Report during the period to /0,P~PQ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                       ~            L ~                       Commis~ions _ _ _ _ _ _ _V_a_._8_8_3___________

Inspector's Signature National Board, State, Province, and Endorsements Date

Attachment 2 Page 15 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/30/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen,. Va. 23060 Sheet _____ 1 of _ _ _ _ _ _ _ _ _ _ _ _ __ AddreH Surry Power Station Two

2. P l a n t - - - - - - - - - - . , . . , . - - - - ~ - - - - - - - Unit-------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-0l, RR#96-134 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_rga:.1._*n_i_a_P_o_we_r~--------- Type Code Symbol StawR----'N.;;;A....:._ _ _ _ __

Name Authorization N o . - - - - - - - - - ~ - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ AddraH Charging System

4. Identification of System _ _ _ _ _ _~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ' - - - -

B31.1 55 NA N-1, N-7

5. (al Applicable Construction Code _ _ _ _ _ _ _ _ 19 ___ Edition, _ _ _ _ _ _ _. Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 8 9

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol McJunkin *"-'

2" Coupling Corporation NA NA 2-CH-PP-2.00 NA Replacement No

7. Description of Work Replace 2" ss piping per DCP. (?.,~"' C7A's4 P...,t/1;-I d),)~A'

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form. (12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St,. New York, N.Y. 10017 REPRINT 12/91

l

                                 ,>J1\*1                                         FORM NIS-2 (Back)

PO# 1'3lll'i' , s rn :t'!. (2" Coupling)

9. Remarks _ _ _ _-----4f._,S:-,_2...1-,jr..,_/'.....__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp, _ _ _ _ _ _N = - A " - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. NA Expiration Date ____.c.N.c:A.::...___________ Signed /7:(J' ~

           ~ ~ e s i g n e e , Title f£z: 44'-ULU                        .

Date ;J;Jj .,s?? CERTIFICATE OF INSERVICE INSPECTION I; the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of _______H_a_r_t_f_o_r_d_,_c_t_.__________-,,----;-:;1;.--:---- have insp~ted the components described

 . in this Owner's Report during the period                                                            to    iq//eff)         D              , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ _ _ ___,t:2{<,_<C:..J**

                       ...*...                  ,.m~..

Q"""',.._,._,-~..,C...~* :d'-'-"<~c.,=..::..._-'--,-*_ _ commissions _ _ _ _-,---__v.,.a--,-._8_8-=--3--:_ _ _ _ _ _ _ _ __

I nspector*sU'at;;e -'
National Board, State, Province, and Endorsements Date,_ _ _ _ _G_/_l_/_19 I

'12

Attachment 2 Page 16 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/27/97

1. Owner Date Name 5000 Dominion Blvd., Glen Allen, Va. 23060 ,"i,\Vt" ~J. l..

Sheet of Address Surry Power Station Two

2. Plant Unit Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-05, RR#96-135 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r..;;;g_i_n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a " l l i l - - - - - - - - - - -

Name Authorization N o . - - - : = - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addra11

4. Identification of System _ _ _ _Charging _ _ _ _System_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ __

6. Identification of Components Repaired or Replaced and Replacement Components

                                                           .. I I

ASME

I,: Code National Repaired, Stamped Name qt Name of Manufacturer Board Other Year Replaced, (Yes Component I Manufacturer Serial No. No. Identification Built or Replacement or No) Dubose Nationa Component Angle Energy Serve NA NA Supports NA Replacement No Structural Dubose Nationa Component Tubing Energy Serve NA NA Supports NA Replacement No Dubose Nationa Component 1/2" Plate Energy Serve NA NA Supports NA Replacemen No Component 3/4" Plate Alfab, Inc. NA NA Supports NA Replacemen No 1/2 11 Plate Alfab, Inc. l NA NA s,.;,pports NA Replacemen No

7. Description of Work _ Install

____ new __ piping ___ supports. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

                                           \ .*           FORM NIS-2 (Back)

PO# CNT515681 {~gle); CNT514921 (Structural Tubing)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CNT538662 (1/2 11 Plate); SSY300434 (3/4 11 Plate); SSY319872 (1/2 11 Plate) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

                                    ----=c.c.._________ Expiration Date _ _ _ _N_A                        _ _ _ _ _ _ _ _ _ __

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. ha~e.inspJcted the components described in this Owner's Report during the period

to ~,

                                                                                          ~//i>/ 0 I                  , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ _ _ _ __.al"""'c;;,-=--~~Q-.,...,~--~'.A.~Tkv~-----Commissions _______V_a_._B_B_3.....,_ _ _ _ _ _ _ _ __ insi>ector~ National Board, State, Province, and Endorsements Date_ _ _____.,,t,_/......._/°7,__19 9)

Attachment 2 Page 17 of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/27/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen,. Va. 23060 2 Sheet of _ _ _ _ _ _ _ _ _ _ _ _ __ Addreas Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-05, RR#96-135 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r_g_i_n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a l ' % ! . . - - - - - - - - - - -

Name Authorization N o . - - - , : = - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addreas

4. Identification of System _ _ _ _Charging System

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.l 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components

                                ,                    t
                ,     .:

I I I ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufectu rer: Serial No. No. Identification Built or Replacement or No)

Component Flat Bar Hub, Inc. NA NA Supports NA Replacement No

7. Description of Work _ Install

_ _ _ _new __ piping ___ supports. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2l informa-tion in items 1 through 6 on this report is included on each sheet, and (3l each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82l This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 _J

FORM NIS-2 (Back) PO# CNT424929 (Flat Bar)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and th is replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type_ Code Symbol Stamp, _ _ _ _ _- = . N : : . A - = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. NA Expiration Date _____N_A ___________ Signed G2 it d ~ J1"f ~&!($,.,.,;~ Owner or ~sDesignee, Title

                                                                                                ,--"<~"""<:

Date~~~~==-...... _____, 19 92 CERTIFICATE OF INSERVICE.INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. h/) 7pected the components described

                                                                                        £      D~D I                , and state that to the best of IT!Y knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Inspector'~ s<<~ _ _ _ _ _ _a..._..,..._,.,Q_~---*-Q------~+-'~~-~-----Commissions _ _ _ _ _ _ _V_a_._8_8_3___________ National Board, State, Province, and Endorsements Date <{,/ /°I 19 f'2

Attachment 2 Page 18 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/09/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va, 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 )ut Surry Power Station Jll.J~7 ~ 7"'t.v 0

2. P l a n t - - - - - - - - - - - ~ - - - - - - - - - - -

N11me Umt_*------------------- 5570 Hog Island Rd., Surry, Va. 23883 wo#oo351060-01, RR#96-136 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _;_v_ir...ge..1.;.;n.;.;i_a;,,,,;,P_o_w_er.:,_

_ _ _ _ _ _ _ __ Type Code Symbol StafilP _ _ _N_A_ _ _ _ _ _ __

Name Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Address Charging System

4. Identification ofSystem _ _ _ _ _ _ _ _ _ _ _ _ _~ - - - - - - ~ - - - - - - - - - - - - - - - - - - -

B31. l 55 NA N-1, N-7* 5; (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _. Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements_19__ _ _ 8 9

6. Identification of Components Repaired or Replaced and Replacement Components i'

ASME Code National ':lepaired, Stamped

                                                                                                               ....

Name of Name of Manufacturer* Board Other ,. Year Replaced, (Yes Component Manufacturer Serial No. No, ldenti~ication Built or Replacement or No) Edward 2" Valve Valves, Inc. 36-22118 NA 2-CH-211 NA Replacement No 2" Pipe Frischkorn, *Inc. NA NA 2-CH-211 NA Replacement No Consolidated 2" Elbow Power Supply NA NA 2-CH-211 NA Replacement No

7. Description of Work Replace 2" s/s check valve'. fo)>.t CIiis~* #-_~/6-1' -41/l,,,,fr *

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure ______ psi Test Temp. _ _ _ _ _ _*°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 L__ __J

FORM NIS-2 (Back) PO# CNT-360346 (2" Valve); CNT-439432 (2" Pipe);

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...:__ _ _ _ _ _ _ _ _ _ _ _ ___:_ _ _ _ _ _ _ __

SSY - 3 6 71 71 ( 2 11 Elbow) Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are.correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________

                                       ~e~s,,..;"'~"".c._.(,c.tfPe~~oo!.!!!J;'"=-__,4t!£,,,,,.,~~"",.,._.*~'4~- Date__.,Q--4~-,,..-------, 19 /1)

Signed,-41'2~~n-"'"er-.1~"11r""'o"-w"'~!;ler~' CERTIFICATE OF INSERVICE INSPECTION I, the undersigne.<!, holdjng a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of virginia and employed by HSBI and I Co. of Hartford, Ct.

  ------------------------r:--;-cr=-r----:-

in this Owner's Report during the period to 19'10'qJ' ve ~spected the components described i) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Date,_ _ ~'1-+-;/,-'-)-""':5/__19 7/

Attachment 2 Page 19 of 78 . Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 2/14/97 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - . , . . , - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address Surry Power Sta.tion Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-08, RR#96-141 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __,_v-=i.:.r.,.g:,in"'i""'a"--'

                                                 ' P""o"'w_,.e;:.r_ _ _ _ _ _ _ _ __                 Type Code Symbol Stamp _ ___,N.,.A:.__ _ _ _ __

Name Authorization No. _ _NA_ _ _ _ _ _ __.:._ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addre11

o.f System _ _ _ _

4 . Id ent1'f'1cat1on Chemical ____ and __ Volume ___ Cont,,:ol _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1. 55 NA N-1, N-7

5. (al Applicable Constru,ction Code 19_,_ _ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced .and Replacement Components

                                                                                   ~r* '
                                                                                     '.                                                               ASME Code
                                                                                         *N11tional                                    Repaired,     Stamped Name*of                 Name of                           Manufacturer            Board            Other

Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Studs NA NA ., NA 2-CH-RV-2203 NA Replaced No Studs Mackson, Inc .. NA -~A 2-CH-RV-2203 )':<A Replacement No

                                                                                    '
                                                                                   <

7. Description of Work Replace flange studs.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches; or dra;..,,ings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each.sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. -

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization N o . - - - - - - - - - - - - - - - Expiration D a t e - - - - - - - - - - - - - - - - Signe~~n~~ Date _ _ ,__U~~~,._d.-F-----, 19 9? CERTIFICATE OF INSERVICE INSPECTION I, the undersigne},holdjng ii valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of irg1n1a Hartford, Ct. in this Owner's Report during the period d I db an empoye Y to

~t HSBI and I Co.

                                                                                               £,Drf"'Z i7,pected the components described
                                                                                                                              ,

of and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ------1=v.-Ll_.l_n
                     /'7(1          ~Adi,.                                                           Va. 883
                        ...sp-L(e=c~t~o~r~-s-s..-*1g~n-+t_,u~re.,.~~~~----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date,_ _ ---=cA=-1-/=-c~--+'f-10'7?

Attachinent 2 Page 20 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions ,, : of the ASME Code Section XI Virginia Electric and Power Co: Date _ _2/10/97 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Ow ner - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addreas Surry Power Station Two

2. P l a n t - - - - - - - - - - - - - - - - - - - ~ - - Unit--------------------

Name 5570 Hog Island Rd., Surry, 'va. 23883 W0#0035638B-01, RR#96-145 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by_~y""j.._r:.,g..,iou.i...

ail....lP.so""'w"'e"'"r_ _ _ _ _ _ _....;,__ _ Type Code Symbol Stamp _ _ _..,..,,,_ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _....;;.;NA;;.;;..._ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ R_ea_c_t_o_r_c_o_o_la_n_t_ _ ___,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5, (al. Applicable Construction Code 831 ' 1 10,:-_-55 :,

Edition,_N_A_ _ _ _ _ _ Addenda,..,._N_-_ 1 '_N_-_7___ Code Case (bl Applicable Edition of Section XI Utilized for Repairi(or Replacements 19__0_9__

6. Identification of Components Repaired or Replaced .and Repi'Jd~~ent Components

                                                                                                               
                                                                                                  . . .... ,. ~
                                                                                                         "                                                                                 ASME
                                                       '                                                                                                                                     Code
                                                                                                        .National                                                           Repaired,     Stamped
                                                                                                 ,**.,

Name of Name of* Manufacturer *Board Other Year ' *, Repll!(led,.: - (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

,.

St;,d NA NA NA 2-RC-HCV-2557B NA Replaced No

                                                                                                      *,,
                                                                                   '*,

Nuts NA NA ',.** ,., _;:;_* NA 2-RC-HCV-2557B NA Replaced No

                                                                                            .,
                                                                                                       .      ,,

Stud Mackson, Inc. NA "'. NA 2-RC-HCV-2557B NA Replacement No 1 . ./ ** *i

                                                                                                   ..                 ,: 1
                                                                                                       -       ,__

Nuts Mackson, Inc. NA . ' . NA 2-RC~HCV-2557B NA Replacement No

                                                                                                             . 
                                                                                                               .,
                                                                                                                              .

7. Description of Work_R_e..cp_l_a_c_e_fa_s_t_e_n_e_r_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic , Pneumatic D Nomin~I Operating Pressure D Other D Pressure ______ psi Test*Temp. . OF NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained fro~.the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (stud & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules cif the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - -NA -------------- Signed (iJ_ _/ ,.d_ ~/ .fi:£ £t1uvU~

              ~ o ~ O e s l g n a e , Title
                                                                                   ~~--6-~~d_._@       _____ ,,s22 CERTIFICATE OF INSERVICE INSPECTION I, the undersignefl,,.hold(ng ii valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State v irginia                      d         db                   HSBI and I Co.                                       f or Province o f Hart ford, Ct .                 an emp Ioye y                                                                        o
  ~;;~;~~;~~;:;~~;;;=====~~~~;g~~~'-g=~~hjve jnspected the components described in this Owner's Report during the period                                         {[ 7!0.,L?Z                          , and state that to the best of my knowledge and belief, the qwner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor,his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer sh,all be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                //0 ~                         --1-/

Va. 883

  ----'-~+--"--'!4..-""""_. . ._-F--F-+-....._M=-_..,_/-=--{/V-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

inspecor'Slgna~ National Board, State, Province, and Endorsements Date _ _ ~F_"&_b+/~/~D__19 'r7

Attachment 2 Page 21 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co Date 12 / 0 3 / 9 7 Name 5000 Dominion Blvd Glen Allen, Va. 23060 Address

2. Plant s, irry Power St at i an Unit - - " T ' " " " ' " ' - - - - - - - - - - - - - - - - - -

Name 6 'J>d. 5510 Hog Isl and Rd Surry Va. 23883 3..e56"'"'3.....6...5cc-'-"P'""J~....Ee.R,.,#,..9'1--/_-..sl.:a.4_,,_6_ _ _ _ _ _1 _ _ ____.w..,_o.,,#""a..,_a... ;,/3/97 Address Repair Organization P.O. Ne( Job No., etc.

3. Work Performed by _ _v~i_r_g_in_1_*a_P_o_w_e_r,...,...._ _ _ _ _ _ _ __ Type Code Symbol Stamp ____N_A_ _ _ _ _ _ __

Name Authorization No. _ ___,,...__ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ R_ea_c_t_o_r_c_o_o_l_an_t_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. l 55 NA N-1 through N-13

5. (al Applicable Construction Code _ _ _ _ _ _ _ _ 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9 _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

See Flange Bolts Westinghouse Comments NA 2-RC-P-lC NA Replacement No

7. Description of Work _ _R_e~p_la_c_e_m_a_i_n_f_la_n~g~e_b_o_l_t_s_.- - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# 86182, bolt serial #'s 13431, 13436, 13428, 13438

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed Qe~~. TiESf ~~ Date _ _ _/,~~~~~-----, 19 9:2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct.

                                                                                              ~e Aspected the components described
                                                                                         "'.>- 0 9 )                      and state that I    I                      '

to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                 ///J ~)                    ~/,.._ ,                                           Va. 883
  -----1-(____..,{l-=-"'_ n'"'sp_e_c.c..'t-o-,r'L..s-+~1g.,n,_a-t~u~re~------Commissions_--::-:----:,------,-,,,--.,-,----=--,-----------
                      ='(d._""'1
                          ...

Natlonal Board, State, Province, and Endorsements Date 1r:2-.I I c:r:: 19 '.1:::2 _J

Attachment 2 Page 22 of 78 Serial No.: 97-709 Docket No.: 50-281 I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date_2_/_1_4_/_9_7_ _ _ _ _ _ _ _ _ _ __

1. Ow ner - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va, 23060 Sheet _____ 1 of _ _ _1 _ _ _ _ _ _ _ _ _ __ Address

2. Plant _ _Surry

_ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ _..;.... Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo356385-03, RR#96-148 Address Repair Organization P.O. No., Job No., etc. n;r..,,..* n.._,...* a....P""'o"'w._e._r_ _ _ _ _ _ _ _ __

3. Work Performed by _ __.y..,;... Type Code Symbol Stamp _ _ _.,.,.__ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _--"N=-A=------------- Addre11

4. Identification of System ____c_h_e_m_i_c_a_l_a_n_d_v_o_l_um_e_c_o_n_t_r_o_l_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (al Applicable Construction Code B3 l. l 19_5_5_ Edition,_N_A_ _ _ _ _ _ Addenda, __N_-_1_'_N_-_7_ _ _ . Code Case (bl Applicable Edition of Section XI Utilized for Repairs oi Replacements 19 89

. 6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board* Other Year . Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement

or No)

Nuts NA NA* NA 2 11 -CH-316-1502 NA Replaced *.No Nuts Mackson, Inc, NA . .:.,,., NA 2 11 -CH-316-1502 NA Replacement No

7. Description of Work Replace two flange nuts.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawihgs may be used, provided (1 l size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization No. Expiration D a t e - - - - - - - - - - - - - - - - Signed ( ) . . / ~ 4 , . .< Owner or OwMr~ignee, Title

                                                ~:Z- 4-~4 Mt.dz~            '

Date h,:-4 /1'( ,19 9,2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned,.holding a valid commission issued by the National Board of-8.o..ilir andaere$Ur.ll Vessel Inspectors and the State virginia H~~ an ~ co. or Province of Har L fui d, CL . and employed by of have ipspected the components described in this Owner's Report during the period to r /IO/" D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                                  ~ __ . ..,+h._                                             Va. 883
                                          -~-./U/~~-'---'
  ------t--::....,*ct,9'-1::--+.kXM.-,,.--~*           __ Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

lnectefs ~ National Board, State, Province, end Endorsements Date*--~d-J-,.-,M?~$(_,____19 97

Attachment 2 Page 23 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 1/17/97. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 Address Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357401-03, RR#97-001 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by Virginia Power Type Code Symbol Stamp _ _ _.e;N::.,A,..__ _ _ _ _ __

Name NA Authorization N o * - - ~ - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ ch_~_m_i_c_a_l_an_d_v_o_1_u_m_e_c_o_n_t_r_o_1_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

7 5, (a) Applicable Construction Code B3 l. l 19--=-=--Edition,_N_A_ _ _ _ _ _ Addenda,_..,N_-i_,_N_.-____ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements*19 8 9

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name*of *

Manufacturer Board* Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement .or No)

Pipe to Valve Weld NA NA NA 2"-CH-385-602 NA Repaired No*

7. Description of Work Repair weld leak. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure_._ _ _ _ _ psi Test Temp, _ _ _ _ _ _* F NOTE: Supplemental sheets in form of/lists, sketches, or drawings may be used, provided (1) size is 8% in. x* 11 in., (2) informa-tion in items 1 through 6 on this report' is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. '

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT. 12/91

FORM NIS-2 (Back) None

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

?:2;t;t~:--1;.--S::-z--k.-,-~-w.-'6-iiG--~--Expi::::n_D_a~t~:..-"'-" '-.,_-_.-/._.-.

       ,     Ow~Wesignea, Title NA                                                          NA 7~~~~~~~~~~~-.-,-g-9_7   __

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,4,holdjng iJ valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of v1rg1n1a and employed by HSBI and I Co. of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - - , , - - - - r = , , - - - - - - - h a v e in~ected the components described in this Owner's Report during the period------"-~--"-+-L-...___ to                       -r-//0?97                     , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. C--, ~ l

  ------"===-'"+,,,,."""-+-~-+---~~~"""""/_'-"'~--Commissions ______________________

Va. 883

                   .Jspecto'r~                                                     National Board, State, Province, and Endorsements

Attachment 2 Page 24 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date_1_2_/_0_9_/_9_7_ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addreas

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit _T_w_o_________________ Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357192-01*, RR#97-002 Addre11 Repair Org11nlz11tlon P.O. No., Job No., etc. Virginia Power

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _- " " " ' - - - - - - - - - - - - Addre11

4. Identification of System ____c_hc...a_r""g_i~ng"----------------------------------

5. (a) Applicable Construction Code B3 l.l 19_55__ Edition,_NA _ _ _ _ _ _ Addendii~ 1 through N-lJ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_s"'9"---

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National *- Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

N72390-Relief Valve Crosbu 00-0004 NA 2-C"-RV-2203 NA Rer.lacement No Replace relief valve.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-436063

9. Remarks-----,-----------------------...:.__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate,of Authorization No, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - - CERTIFICATE OF INSERVICE INSPECTION I, the undersigned_ .holding a valid commission issued by the National Board otBoiler and P.,ressure. Vessel Inspectors and the State V1rg1n1a HSB~ ana ~ co. or Province of ., ,,. r and employed by of

          .         harCLULu, ~L.
  - - - - - - - - - - - - - - - - - - - - - - - - - - . - - - , > - = - - - - -

h 9 1 1 e il)S?ected the components described in this Owner's Report during the period 7 to V@(" I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                 ,/7 / ) ~ . .                                                                        Va. 883
  -------"CLL-.-...Jd..c:"-L---l-ff---1'---1'-"~~...,.,_._--'-,-'l'.---Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

inspectqr~ National Board, State, Province, and Endorsements

Attachment 2 Page 25 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 1/21/97 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address Surry Power Station Two

2. P l a n t - - - - - - - - - - - - - - , - . , . . - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357612-0l, RR#97-003 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_......,_v...

i,..rg:,..J.e.,n.!.-'is.ea,.__..P,.o.,,_we,:.re___ _ _ _ _ _ _ __ 0 Type Code Symbol Stamp _ _ __,,N,,,Ac.__ _ _ _ _ __ Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System ____c_h_e_m_i_c_a_l_a_n_d_v_o_l_um_e_c_o_n_t_r_o_l_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1 7

5. (al Applicable Construction Code B31. 1 19~Edition,_N_A_ _ _ _ _ _ Addenda, __N_-__'_N_-____ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9__

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Beare! Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Pipe To Valve Weld NA NA NA ;t_-CH-191 NA Repaired No

                                                                                                                 ).,t  /~?

7. Description of Work_R_e.::p_a_i_r_w_e_l_d_l_e_ak_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) None

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPL'IANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ ____ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,,,holdjng ii valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of v1rg1n1a , and employed by HSBI and I Co. of Hartford, Ct.

                                                                                          ~e ~~ected the components described
                                                                                       ~I     'D/ 9  :Z                , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                    ~~,...-h--,,..
  -------'~'-=-'l=-l"=rl-~-+-+-+~"/l,(/~~--

Va. 883

                                                         '--_ _ Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
                   ~~                                                           National Board, State, Province, and Endorsements

Attachment 2 Page 26 of 78

                                                                                            . ;,,.,                                                                       Serial No.: 97-709 Docket No.: 50-281
                                                                                                  ,,      ::...
                                                                                          *:;:......1,:>'1:\
                                                                                                    ~ :.~ (: >
                            'FORM NIS-2 OWNER'S REPORT.f.OR REPAIRS OR REPLACEMENTS As Required by the Provi~i~'ris ~f the ASME Code Section XI

Virginia Electric and Power Co: 1/28/97 Date _ _ __,_ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner - .:.~-r*~,.

Name .... *.': .* '-, . ~\. *:J . 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet ______1 1 of _______________ Addreas Surry Power Station Two

2. P l a n t - - - - - - - - - - - - , - . , . - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357822-01, RR#97-004 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by ___v.;.i;;.;*r::..g;<.:i;;.;:n;;.;:i"'a'-"-P""ow"-e"-'r=----------'-- Type Code Symbol Stamp ____ NA

_ _ _ _ _ _ __ Neme NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date ____ NA_ _ _ _ _ _ _ _ _.....;._ _ Addreas

                                                                                                    ....       ~   ..

Chemical and Volume Con):,rol:

4. Identification of S y s t e m - - - - - - - - - - - - - - - ' - - - - - - ' - - - " - - - - - - - - - - - - - - - - - - - -

B31.1 .*f5;**-::* NA N-1,N-7'

5. (a) Applicable Construction Code 1 9 ~ Edition,---'------* Addenda, ________ Code Case (b) Applicable Edition ~f Section XI Utilized for Repairsp~-R:~placements 19 89

                                                                             ..J,      *, ... _,,:.,,.

6. Identification of Components Repaired or Replaced .and Replacement - ~ -~I Components ASME

                                                                     'i Code
                                              "
                                           '  -..'~ .. ~                         ,.                   National -                                                Repaired,     Stamped Name of                 Name of                    Manufacturer,-           :.>..',:              B6ard                    *other         :vear*       Replaced,       (Yes Component             Manufacturer                   Serial No.                                 . ', No.                 Identification     Built   or Replacement or No)

_j.. , . .. Studs NA NA NA 2-CH-HCV-2244 -NA Replaced No Nuts NA NA i ~<:: NA 2-CH-HCV-2244 NA Replaced No Studs Mackson, Inc. NA ;

                                                                          *".         *.. _               .,     '       NA    2-CH-HCV-2244          NA       Replacement        No
                                                                                                              ..
                                                                                          -        . *...*. ,,

Nuts Mackson, Inc. NA NA 2-CH-HCV-2244 NA Replacement No

                                                                                                                                                                                             -'-.~

7. Description of Work Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Noniil)~l;QPerating Pressure D Other D Pressure ______ psi Tes(Temp. °F

                                                                                        'r.i-:~1~~~~-~~ :(,~

NOTE: Supplemental sheets in form of lists, sketches; or drawings may be used, provided (1 I size is 8% in. x

11 in., (2) informa-tion in items 1 through 6 on this report is included on. eacl)_.sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of th is form. *:,.,.:: * *, :. *

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., N,!!w York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO # BNT-467650* (studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - , - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code* Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, ____N_A _ _ _ _ _ _ _ _ _ _ Expiration Date --+-'--N_A ___________ Signed Q.~ d ~ Owner or O w ~ e . Title

                                               .fS:Z:- d.u$.,~
                                                           .

Date _ _ 'C~'JJ~f~'/'l~JA.~r~,~2,....fl'~,, 19 12

                                                                                                                                 -'-~--

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~,,.holdi,ng !I valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

          .     . v 1rg1n1a                                                     HSBI and I Co or Province of                               and employed by

of Hartford, ct.

h : il)spected the components described in this Owner's Report during the period S-: ¥ to ~tz.0/97 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in.accordance with the requirements of the ASME Code, Section XI. By signing this_ certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                   ~~ *~,.,_                                                                  Va. 883
  -----+~~-,_,.'-""--,.__-+--l'C-..1<~yt,,A..A/-=-=---_ _ Commissions-....,..,.---,------------------

insi>ector'signatura National Board, State, Province, and Endorsements

Attachment 2 Page 27 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo354999-01, RR#97-053 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i_rg-'-1-*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf----N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ Recirculation

_ _ _ _ _ _Spray _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Coda Casa (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 2-RS-PH Support NA NA NA 123Hl.10 NA Repaired No

7. Description of Work Add additional welds to support.

8, Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY:. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) NA

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and th is repair conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A________________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ____________ Signed_,,..,()~~e.--e..~~.....L.._-"-c,~;=,..__--4,:/),c.,_,~t...o.li'.e.l!J'~*=e=,.....;:'------- Date-~/i_'()_-~/~t~""'----, 19 1'°J r n e r or Owner'sp'esignea, Title 1 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - , - - - - - - h a v e inspected the components described in this Owner's Report during the period                                                              to      5;!/[?!0   1                , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ _ _ _ __,,a=""""'-"'Q'""---'----~+-+-~~<--"'~---'--------Commissions _______v_a_.__s_s_3_ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _ _ _ lf_, 7

                                       ~L~/i_J__19._~f~/~

Attachment 2 Page 28 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM 1'.'!IS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/06/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _- ' - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addreis Surry Power Station Two

2. P l a n t - - - - - - - - - - - - - - - - - - - - - - - Unit---------~----------

Name 5570 Hog Island Rd., Surry, Va. 238.83 W0#00342506-0l, RR#97-077 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_~v=ir=g~1.=*n=i~a~P~o~w~e=r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _N.,,A..__*_ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _~ - - - - Addraas Containment Spray

4. Identification o f S y s t e m - - - - - - - - - - - - - - - - - - - - ~ - . , . . . . ~ - - - - - - - - - - - - - - - -

B31 1 55 NA d N-1 through N-13

5. (a) Applicable Construction Code

19 ___ Edition, _ _ _ _ _ _ _ A. denda, _ _ _ _ _ _ _ Code Case

   . (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 1g __  89_ _

6. Identification of Components Repaired or Replaced .and Replacement Components ASME I Code

                                                                                                                        '
                                                                   . National                                      Repajred,     Stamped Name of                Name of           Manufacturer        Board*            Other          Year      . Replifed,       (Yes Component            Manufacturer          Serial No.          No.          Identification     Built   or Replacement or No) 9/16" Studs     & Nuts     Mackson, Inc.           NA                      NA        2-CS-15            NA       Replacement         No

7. Description of Work Install new body to bonnet gasket.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) BNT-467650 (9/16" studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. _ _ _ _ N_A___________ Expiration Date _ _ _ _N_A___________ Signed { ] ~ ~ - * .L/ 7S'.Z- Date _ _~/~/_.~'---"'--------, 19 9,2 O w n ~ ~ Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - + = - - - - - have ilJspected the components described in this Owner's Report during the period _ _ _ _ _ _ _<-,t.'-'-=-f-L--<--tO                   z;/1{;!0 I                    , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any,personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                          /7~             ~
  ------~C:,...4:J_.....,"""'"...,.__~*~~~,,,_~_,__V7
                                                           <'-ff-_                                   Va. 883
                                                    .....AA/~~-V"--"--commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

insi>ectos Signaturi( National Board, State, Province, end Endorsements Date 11 lob I 10 97

Attachment 2 Page 29 of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/27/97

1. Owner Date Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet of Address Surry Power Station ~ ,,.:&-

2. Plant Unit

                                                                                                  -;-,,.,,<l N11me 5570 Hog Island Rd., Surry, Va. 23883                                                 W0#00360182-01,        RR#97-114 Address                                                Aepalr Orgenlzetlon P.O. No., Job No., ate.

3. Work Performed by _ _v_i_r::.g_in_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a , n , R - - - - - - - - - - -

Name Authorization N o . - - - : = - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addren

4. Identification of System _ _ _ _ Containment

_ _ _ _ _Spray _ _ _System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME I

Code National Repaired, Stamped Name of Name of' Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or No) Mackson 7/8" Nut Incorporated NA NA 2-CS-25 NA Replacement No 7/8" Threaded Mackson Rod Incorporated NA NA 2-CS-25 NA Replacement No

7. Description of Work Replace body to bonnet bolts one at a time.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, end (3) each sheet is numbered and the nu.mber. of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (7/8" Nut arid 7/8" Threaded Rod)

9. R e m a r k s - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

                                    - - - - - - - - - - - - - - - E x p i r a t i o n Date _ _ _ _N_A_ _ _ _ _ _ _ _ _ __

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the N*ational Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of _______H_a_r_t_f_o_r_d_,_C_t_*-----------,.--:~.-:-----hav;,_ in~cted the components described in this Owner's Report during the period to /q//~ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in.accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.~.~

  ---->.~--"""""""",._..___~--t<-~"'--"'-------Commissions _ _ _ _--:-__V---,--a--=-._8_8_3_ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date._ _ _ _ _ b=+a~*t)...~__19 I

f:z

Attachment 2 Page 30 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ _ 11/07 ___ /97 _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - ~ - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00364363-03, RR#97-128 Address Aepalr Organization P.O. No., J.ob No., etc.

3. Work Performed by_......:.V.:.i::.rq"'1"'*na:ai:.:a::....:P-=o-"w""e::.r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.e,NA:.:..._ _ _ _ _ __

Name Authorization No. _ _NA _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ AddreH Main Steam

4. Identification of S y s t e m - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - - -

83 1 1 3

5. (al Applicable Construction Code 1. 19~Edition,_N_A_ _ _ _ _ _ Addenc/;t through N*l Code Case (bl Applicable Edition of Section-XI Utilized for Repairs or Replacements 19 8 9

6. Identification of Components Repaired or Replaced.and Replacement Components ASME Code National .. *,, i Repaired, Stamped Name of Name of Manufacturer Board

                                                                                                        .. ., >'J,,     Other* .       ** Year       Replaced, '*   (Yes Component                Manufacturer                                   Serial No.         No.                Identification       *Built. or Replacement or Nol
                                                                                                                      \
                                                                                                                                 \

Grinnell Grinnell Support Pipe Supports #41-28026 NA 2-MS-RV*201C NA Replacement No NOVA Mach. Cap Screw Prod. Corp .. NA NA 2-MS-RV-201C NA Replacement No

7. Description of Work Replace spr~ng can hanger.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT~553656 (spring hanger), SNS-414213 (cap screw)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Dat,a Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair.or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signed(}./! ~--G4.c'.

      .      Owner oi owc,r's Designee, Title

c~r LAl(y,h~e,(4 Date--~b~~+6---r-----, 19 f 2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v irginia and employed by HSBI and I Co* of Hartford, Ct.

haYj in:,cted the components described in this Owner's Report during the period ~ to ~{_/ l>[.P I ; and state that . to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in.accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor. his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

               .,,,-n              ~             .,*-t--;,                                            Va. 883
  ,____""'CdJ.,dL=-.....,._..~...,-~--,~1-~--t-4,,..4.~AIL~~/'--"----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

lnspector'sSidnature National Board, State, Province, and Endorsements Date

Attachment 2 Page 31 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 8/04/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ AddreliS Surry Power Station Two

2. Plant Unit _ _~ - - - - - - - - - - - - - - - -

                                       - Name 5570 Hog Island Rd., Surry, Va. 23883                                               wo#00351999-13,      RR#97-131 Address                                               Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_rg"'i_*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N:.::A:.:....__ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Address Charging _4. ldemification of S y s t e m - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ' - - - - - - - B31.1 55 NA N--1 through N-13 5, (a) Applicable Construction Code 19 ___ Edition,-------'~ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9 __

6. Identification of Components Repaired or Replaced _and Replacement Components ASME

                                                    '                                                                               Code National ,.                                   Repaired,     Stamped Name of               Name o*f             Manufacturer        Board             Other          Year        Replaced,       (Yes Component            Manufacturer            Serial No.          No.          Identification     Built    or Replacement or No)

Weld NA NA NA 2-cH-Hcv-*22ooc NA Repaired No

7. Description of Work Repair weld leak. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure Ci?"

Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) None

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repaired conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________

Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - NA

                                                                                                         --------------

Sig~ed <i2 .,t__ ~ ~ Owmf~esignee, Title

rr:.:r CERTIFICATE OF INSERVICE INSPECTION I, the undersigne.p,,.holdjng II valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

          .          virginia                                                     HSBI and I Co.

or Province of and employed by of Hartford, Ct. have) ins:ected the components described in this Owner's Report during the period ? to t

                                                                                           'Cf-ID DI                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _____

                    /7) ~ ________
                 ~_.,r-_-.~,..,_~.....__,._,,_ 'It: ,                                         Va. 883 commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

4

                   .Jnspector'~                                                 National Board, State, Province, and Endorsements Date._ _ _$........,/r-_,,_/--+-'}_19 I
                                                'f 2

Attachment 2 Page 32 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 9/04/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion .B.lvd., Glen Allen, Va. 23060 1 1 Sheet of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ __ , , . , . . . . . - - - - - - - - - - - Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-16, RR#97-132 Address Repair Organization P.O. No., Job No,, etc.

3. Work Performed by _ _v_i_rg=-1-*n_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ __

Name Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ AddreH Charging

4. Identification of S y s t e m - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - - -

B31. l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 9

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ~

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Bui!t or Replacement or No)

Consolidated 2-CH-HCV-Valve Support Power Supply NA NA 2200 B & C NA Replaced No

7. Description of Work_M_o_d_i_fy_s_u_p_p_o_r_t_s_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be us~q. provided.(1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BSY 359003 (3"X 3"X 1/2" angle)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that"the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ ____ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ CERTIFICATE OF INSERVICE INSPECTION I, the undersignep1 ,hold(ng ii valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of v1rg1n1a and employed by HSBI and I Co. of Hartford, Ct.

                                                                                         .h,ve ipspected the components described in this Owner's Report during the period-------~+-~'"-+~--..to                     7/'lo/9        I                 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. fie? O'llAJ

  ------i~=--~1::;{_,_    __..___...,_~~~-+-+--"'-------Commissions I

Inspector's Signature Va. 883 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ National Board, State, Province, and Endorsements Date-~~~~~~_,_;1',_~~~19

z::2'.'. /

Attachment 2 Page 33 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date _ _1_2_/_0_1_/_9_7_ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet ___l_ _ of_ _ _l __________~ Address

2. Plant _ _ Surry

____Power ____ Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit __T_w_o_________________ Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00336464-03, RR#97-134 Address Repair Organization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. ___N_A_ _ _ _ _ _ _ _ _ _ __ Expiration Date _ _ _~ - - - - - - - - - - - -

4. Identification of System _ _ _ _c_o_n_t_a_i_n_m_en_t_s~r_a~------------------------------

5. (a) Applicable Construction Code . B31.1 19_5_5_ Edition,_N_A_ _ _ _ _ _ Addenda'!-1 through N-13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_~~-

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

BW/IP C:.'1 'U,::,l ,ro T..-.t-0,...n,::1,t-' ---.1 "' ,on-A-1 ,rn ?-r"-"~"-?non srn 00,....1-- * - __ .._ Nn

7. Description of Work _ _R_e_p_la_c_e_v_a_l_v_e_._c_o_d_e_c_a_se_N_-_4_1_6_-_1_a_p_p_li_*e_s_.- - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 L

FORM NIS-2 (Back) CNT-555934

9. R e m a r k s - - . . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _______________________________ Certificate of Authorization No, _ _ _ _ N_A___________ Expiration Date _____N_A ___________ SigneQ/~ ..T£Z:: Ownw orr{er's Designee, Title

                                                    ~/~                         Date-~/.-~,,..i+---------,              10??

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have insp7cted the components described in this Owner's Report during the period to 'i"';//Lj/0/ , and state that to the best of my knowledge and belief, the Owner has performed examinations and take.n corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -------+-/J....,,,..._:(2..._._L~~-~-   ,,....~*~-----Commissions _______v_a_._8_8_3_ _ _ _ _ _ _ _ _ __
                      ~,;;;;.; S ~                                             National Board, State, Province, and Endorsements Date                       1,p..IIA- 9?  19

Attachment 2 Page 34 of 78 Serial No.: 97-709 Docket ~o.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1

 . Owner    Virginia Electric and Power Co.                                                                            Date _ _   1_2_/_0_1_/_9_7_ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address Surry Power Station

2. Plant ______________________ _ Unit __T_w_o________________

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00336464-03, RR#97-135 Address Repair Organ,ization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. ___N_A_ _ _ _ _ _ _ _ _ _ __ Exp_iration Date _ _ _....,__ _ _ _ _ _ _ _ _ _ __

4. Identification of System _ _ _____,c"-'o"'n'--=t'-"a'-=i~n""m""en,.,_t"--'S"--'p"-'r'--'a,..y_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (al Applicable Construction Code B31.l 19_s_s_Edition,__:N:.::.A.:..._ _ _ _ _ Addend.r,-1 through N-13 Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 as

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Ma*nufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

BW/IP 6" Valve International E138A-4-2 NA 2-CS-MOV-202B NA Reolacement No 7, Description of Work. _ _R_e_p_l_a_c_e_*v_a_l_v_e_._c_o_d_e_c_a_s_e_N_-_4_1_6_-_1_a_P_P_l_i_e_s_.- - - - - - - - - - - - - - - - - - - - - - 8, Tests Conducted, Hydrostatic D Pneumatic D Nominal Operating Pressure !RI Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form. (12/821 This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017

FORM NIS-2 (Back) CNT-555934

9. R e m a r k s - ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________ Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - -NA -------------- CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - , - = - - , . - = - - - - - - h a v e ins9ected the components described in this Owner's Report during the period _ _ _ _ _ _...L..r----+-...,_--'7'--_to    £;1/D/n       I              , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -------<a=<-t_...,,.(2_._..,_)d......,,..,.y~~~~~~-----Commissions _______V_a_._8_8_3____________

Inspector's Signature National Board, State, Province, and Endorsements Date,_ _ _ _~/~~-,,-/~~--19 Z7

Attachment 2 Page 35 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - , - , - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addrees Surry Power Station Two

2. Plant Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00351999-02, RR#97-141 Address Aepalr Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir_g"'-1-*n_1_*a_P_o_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _N:..cA:.::..._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _charging_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Astra Nuclear Part #883D Flow Orifice Dynamics Inc. 391G01 45 ( PM NA 2-CH-R0-20RLD1 NA Replacement No Consolidated 2" Pipe Power Sup. NA NA 2-CH-R0-20RLD1 NA Replacement No

7. Description of Work Replace flow orifice. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure ~

Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) P. 0. CNT-543809 (orifice), CNT-548935 (2"pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed Q-£~L/ ..:.Z:s.;r bo1&!e#Ld Owner orer's Deslgnea, Title Date _ _ ~..-1~:Y._v'>~?______ , 19 9' CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,, holdjng a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of virginia and employed by HSBI and I Co. of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - , - - - , - - b , , . - - - - - h a v e ;*nspected the components described in this Owner's Report during the period                                              to S   /ID,        0 I                  , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ____a=-Q-=-~- _\.._~--f"--+-Q+-d....;J;i--~'-~--Commissions _ _ _ _v_a_*._B_B3_ _ _ _ _ _ __ inspector's~; National Board, State, Province, and Endorsements Date II / 1d-- 10 97

Attachment 2 Page 36 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 11/07 ____ /97 _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - , , . , . - - - - - - - - - - - -

Name 5000 Dominion BLvd., Glen Allen, Va. 23060 Sheet _____ 1 of _ _ _1 _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _....;.

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357847-03, RR#97-142 Address F,iepalr Organization P.O. No., Job No., ate.

3. Work Performed by _ _ v_ir~g""i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp ___....:..:NA:..:...._ _ _ _ _ __

Name ' NA Authcirizatipn N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_*- - - - - - - - - - - Address Charging

4. Identification of S y s t e m - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B31.1 55 NA N-1 through N-13

5. (al Applicable Construction.Code 19 ___ Edition, _ _ _ _ _ _ _. Addenda, Code Case 89 (bl Applicable Edition of Section XI Utilized tor Repairs or Replacements 19__ __

6. Identification of Components Repaired or Replaced and-Replacement Components I ASME Code Nl!tional Repaired,. Stamped Nar'ne*of Name-of Manufacturer Board ' Other Year ' R!!plilced, (Yes Component Manufact1,1 rer . Serial No. No. Identification Built or Replacement or No)

Part# ' . NA Valve Body Copes-Vulcan 359784 2-CH-HCV-2200A NA Replacement No Consolidated 2" Pipe Power Sup. NA NA 2-CH-HCV_-2200A NA Replacement No Energy & 2" Pipe Process Corp. NA NA 2-CH-HCV-2200A NA Replacement No

'/

7. Description of Work Replace valve body. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure IX]

Other D Pressure _ _ _ _ _ psi Test Temp. ______° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT-544184 (valve body), CNT-552689 (2"pipe),

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CNT-548935 (2" pipe) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ________________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ SignedQ,£ ~ - d.-<' Owner or~Deslgnee, Title

                                            ..T5'::Z:-                          Date--~/,~,-'_,_,6----t~-----, 19           9Z CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State
           .

or Province of Virginia and employed by HSBI and I Co. of

Hartford, Ct.

haainyjcted the components described 5:J-i? [)/ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 883 _ _ _ commissions _ _ _ _ _ _v_a_.___ _ _ _ _ _ _ _ _ _ _ __

  ---------'.=-~""'-+"'""""f--'-*~+--+-~'4'-h-~<=-.u,c./
                      ~g£J':i'*                                                National Board, State, Province, and Endorsements Date._ _ _ _ _~/_,//;'""{;fl_u__19 I

97

Attachment 2 Page 37 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. P l a n t - - - - - - - - - - . . , . . , . . . - - - - - - - - - - - Unit-------,--------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo351999-o3, RR#97-143 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_rg=-i-*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Sta'J'f---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addra11 Charging

4. Identification of S y s t e m * - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - - - - - - - -

B31.1 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ 8_9 __

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National. Repaired, Stamped

,.

Name of Name of Manufacturer Boarl:*-'* '

                                                                                          =* Other          Yeilr'   .

Replaced, (Yes Component Manufacturer Serial No. No. Identification Built o.r Replacement or Nol Astro Nuclear Part #

Flow orifice Dynamics Inc. 883D391G01 60GPM NA 2-CH-Rci-20RLD3 NA Replacement No Consolidated 2" Pipe Power Sup. NA NA 2-CH-R0-20RLD3 NA Replacement No

7. Description of Work Replace flow orifice. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pres_sure !)ig Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (11 size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) P. 0. CNT-543809 (orifice), CNT-548935 (2"pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF C<;)MPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _N_A___________ Expiration Date _ _ _ _N_A ___________ Signed~ c / ~ - -U" O~~Designee, Title

z:rr: &W~efU., Date_~/.~'/~/)_?~------, 19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~,, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

virginia HSBI and I Co.

or Province of and employed by of Hartford, Ct. have i)6ected the components described

                                                                                        ~~  / / 0. 0 I
                                                                                                                       ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _______/7(.,,....-:c++,r2~'----c:)-+-.,,.C1<-+-'/l=A-~~---Commissions _ _ _ _ _v_a_._ 8_8 _3 _ _ _ _ _ _ __

                 ~actor's~L;                                                   National Board, State, Province, and Endorsements Date                        /I/;.;;;._   19   . 97 7

Attachment 2 Page 38 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner -----------:-c-------------

Neme 5000 Dominion Blvd., Glen Allen, Va. 23060 1 AddreH Surry Power Station Two

2. Plant Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357848-03, RR#97-144 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_.....:.V=.ir,_g:,.iee*n~i:.:*a=-..,Pc::oe.:w!Oe:.:r:...,.,.---------- Type Code Symbol Stamp _ ___,N,.,,Ac.:....._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _c _ h _ a _ r _ g _ i _ n g - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B3l 1 55 NA N-1 through N-13

5. (a) Applicable Construction Code

19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 8 9

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of :; Manufacturer Board Other Year Replaced, (Yes

..J Component Manufacturer Serial No. No. Identification Built or Replacement or No) Part# Valve Body Copes-Vulcan 359784 NA 2-CH-HCV-2200B NA Replacement No Consolidated 2" Pipe Power Sup. NA NA 2-CH-HCV-2200B NA Replacement No llnergy & 2" Pipe Process Corp. NA NA 2-CH-HCV-2200B NA Replacement No

7. Description of Work Replace valve body. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure [g]

Other O Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT-544184 (valve body), CNT-552689 (2"pipe),

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CNT-548935 (2" pipe) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A___________ SignedQ ~ / _ eu....-: T ~ Owner~ner's Designee, Title Date_~,,-.~'j..,.4....,. _ _ _ _ _ _ _ , 19 l'Z CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and 1 Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - = - - t - = - + - , , , - - - - - - h a ~ 7 ' ins~ected the components described in this Owner's Report during the period                        71  /D. C/7 to           ~i/ DfrJ I                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By' signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                         ~Q, .0                 ~~

_ _ _ _ _ _ _ _.,,C,.L..U-........,,._"-'-_./~/}~_,_-"-----'-----Commissions _ _ _ _ _ _ _ Va.___ 883 _ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National Board, State, Province, and Endorsements Date 11/;;o I 19 12 0

Attachment 2 Page 39 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Re;quired by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date 12/04/97

                                                                !\lame 5000 Dominion Blvd., Glen Allen, Va. 23060 Address

2. Pla_nt SJlrry Power Station Unit Two Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-04 1 RR#97-145 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v:.. :i:..:r:..ag<.:i:..:.n:..:i:..:.a:.. . .:.P. :.o.c.w. :.e:..:.r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp ____N_A_ _ _ _ _ _ __

Neme Authorization N o . - - = - - - - - - - - - - - - Same as above Expiration Date ___N _ A - - - - - - - ~ - - - - - Address Charging

4. Identification of S y s t e m - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - -

                                                                         ,B31.1                            55              NA                        N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9 _ _

6. Identification of Components Repaired.or Replaced and Replacement Components

                                                                                                               '*                                                           ASME Code National                                       Repaired,     Stamped Name of                 Name of                                                    Manufacturer        Board.             Other          Year        Replaced,       (Yes Component            Manufacturer                                                     Serial No.            No.         Identification     Built   or Replacement or Nol Astro Nl!clear/                                                   Serial# M 125-1 Flow orifice          Dynam:i:cs Inc.                                                   & M1125-2                   NA  2-CH-R0-20RLD2         NA       Replacement        No Capitol Pipe 2" Elbow            & Steel Prod.                                                     Ht # OJ                     NA  2-CH-R0-20RLD2          NA      Replacement        No Consolidated 2" Pipe           Power supply                                                       Ht # Cut R K               NA  2-CH-R0-20RLD2          NA      Replacement        No
                                                                                                                      '

7. Description of Work __R_e_p_l_a_c_e_f_l_o_w_o_ri_'f_i_*c_e_._c_o_d_e_c_a_se_N_-_4_1_6_-_1_a_p_p_l_i_e_s_.- - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure J&l Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists; sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-543809 (flow orifice), NS-32947 (elbow),

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CNT-548935 (2" pipe) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI.

repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A___________ Signed ( ) -£ ~P ._,,,,,JI/ Owner or ~ s Designee, Title

                                               -Z:S:Z: C""4 a/Ced.                 D~----L-L-4~-~-~,19 f7 CERTIFICATE OF INSERVICE INSPECTION I, .the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                         and employed by                   HSBI and I Co.                                     of Hartford, Ct.

to the best of my knowledge and belief, the Owner has performed examinations and taken co ive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ~~--+-.,....=Q"""'"~~*-~--__,._+*~-

alnspector's Signature

                                          .~~------Commissions
                                           .                                  _ _ _ _ _ _ _v_a_._ 8_8_3_ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date;_ _ _ _ ..._/==-~c+/--"£'"'--_19 7 z'")

Attachment 2 Page 40 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Address Surry Power Station Two

2. Plant Unit---------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo357B5o-o3, RR#97-146 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_r_..g'-i_n_i_a_Po_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _c_;NA:..:...._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Addreas

4. Identification of System _ _ _ _c_h_a_r_g_in_g_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part# Valve Body Copes-Vulcan 359784 NA 2-CH-HCV-2200C NA Replacement No Consolidated 2" Pipe Power Sup. NA NA 2-CH-HCV-2200C NA Replacement No Energy & 2" Pipe Process Corp. NA NA 2-CH-HCV-22 OOC NA Replacement No

7. Description of Work Replace valve body. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure t8J Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT-544184 (valve body), CNr552.689 (2 "pipe),

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CNT-548935 (2" pipe) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report*are correct and this replacement conforms to the rules of the ASME Code, Section xi: repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No, _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - NA ------------- Signed QV- -. rs::z-Owne~esignee, Title

                                '!/                                              Date _ _~//~6-+-------, 19                   92 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne.d,., holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v irginia                     and employed by                    HSBI and I Co*                                     of Hartford, Ct.

in this Owner's Report during the period--------'-+-'---1'-'--'-- to the best of my knowledge and belief, the Owner has performed examinations and taken c Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or propE!_rty damage or a loss of any kind arising from or connected with this inspection.

                                   ~                                                         Va. 883
  ------+----::;"r---17":>'f-.......,11'--J'T"~-------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

cor's~ National Board, State, Province, and Endorsements Date._ _ _ _ _---'-/._'l+=~-D__19 t:7

Attachment 2 Page 41 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/1 7 /97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _____ 1 1 of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo~51999-12, RR#97-147 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_r-g~i_n_i_a_Po_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _..::N..::A:....__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _Charging

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.l 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8 _9 _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Energy & Ht# 2" Flange Process Corp. 213XNE NA 2"-CH-532-602 NA Replacement No Energy & 3" Flange Process Corp. Ht# C5076 NA 2"-CH-532-602 NA Replacement No Consolidated Ht# 3" Pipe Power Supply L38697 NA 2"-CH-532-602 NA Replacement No Energy & Ht# 2" Pipe Process Corp. 437526 NA 2"-CH-532-602 NA Replacement No

7. Description of Work _ _R_e_p_l_a_c_e_p_ip_e_._c_o_d_e_c_a_s_e_N_-_4_16_-_1_a_p_p_1_i_e_s_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 L__

FORM NIS-2 (Back) PO # CNT-42135 (2" flange), CNT-559903 (3" flange),

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CNT-542234 (2" pipe), SSY-410675 (3" pipe) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization N o . - - - - - - - - - - - - - - - Expiration D a t e - - - - - - - - - - - - - - - - SigneW f fl ~ IS"':Z Owner o~ar's Designee, Title Date _ _ _,_,~~4'-F-f'-7____ , 19 9? CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,q. holdjng a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

          .         virg1nia                                                     HSBI and I Co.

or Province of and employed by of Hartford, Ct. hZmpected the components described

                                                                                        ~         0J                     , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

               ~/) 0                          -hf----.""                                    Va.      883
  -----+~-7"-'~0=-~r--...J::d,.--?-~-,...~-------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

insµector'sSJg~ National Board, State, Province, and Endorsements Date

Attachment 2 Page 42 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date _ _ 1_2_/_0_l_/_9_7_ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 p. .z Sheet _ _ _1 _ _ of _ _~ . - ~ - - - - - - - - - - Address

2. Plant Surry Power Station Unit __T_w_o_________________

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-11, RR#97-148 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r_g_i_n_i_a_P_o_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ _N_A_ _ _ _ _ _ __

Name Authorization No. ___N_A_ _ _ _ _ _ _ _ _ _ __ Expiration D a t e - - - - ~ - - - - - - - - - - - Address

5. (a) Applicable Construction Code B31.1 19_5_5_Edition,~N=A~_ _ _ _ _ Addendaj"-1 through N-13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_-B-'l~-

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No.* Identification Built or Replacement or No)

Dubose Nat. Tube Steel Enerav Serv NA NA 2-CH-Sunnorts NA Renlacement No Energy & Tube Steel Process Corp. NA NA 2-CH-Supports NA Replacement No Interstate 1/2" Plate Steel Supply NA NA 2-CH-Supports NA Replacement No

   - . ..  --
           ............. -

Consolidated

                                    .-     -                -
                                           ..., - ....- ...- -.,
                                                                       ...                    ..          -** - .. --
                                                                                                      -- -**                     ...      - .-                ..
                                                                                                                                                               *-

Consolidated 1 /11,r C"l-.+- 'Q-,..,.

                                     -     c,
                                                            '          '"                     '"
                                                                                                       ")_,-.u_c
                                                                                                                         -       '"       -   '       ,,-
                                                                                                                                                              "-

7. Description of Work _ _F_a_b_ri_*c_a_t_e_,_m_o_d_i_f_y_,_i_n_s_ta_l_l_p_i_p_e_s_u_p_p_o_rt_s_.- - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017

FORM NIS-2 (Back)

PO# CNT-514921 (tube- steel), CNT-505552 (tube steel),

9. R e m a r k s - ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CNT-539203 (1/2" plate), CNT-555935 (1/4" flat bar), CNT-546862 (1/4" flat bar), CNT-522154 (3/8" Kwik-Bolt) CERTIFICATE OF COMPLIANCE We certify that the statements m~de in the report are correct and this . replacement. conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - Date __ ,~l,='L~/,-/_______ , 19 f' '? CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~, )lolding .i valid commission issued by the National Board of.B.oiler and P.res$Ur~Vessel Inspectors and the State v1rg1n1a HSB~ ana ~ ~o. or Province of Hart fora:, Ct. and employed by of have in:9ected the components described in this Owner's Report during the period to q/i>,L()I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any* manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                         .,,/1// C")              ..,f-,1                                       Va . 8 8 3

________,,0Cka-.~~...*.....YJ--1'4c.,,,.~~~~----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National Board, State, Province, and Endorsements Date /;,.._JA 10 9:z

Attachment 2 Page 43 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date __1_2_/_0_l_/_9_7

_ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _ _ 2 _ _ of _ _ _2 _ _ _ _ _ _ _ _ _ __ Address

2. Plant _ _ Surry

_ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Two Unit--------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00351999-ll, RR#97-148 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _Virginia

_ _ _ _Power _ _ _ _ _ _ _ _ _ _ __ NA Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __ Name Authorization No. ___ NA_ _ _ _ _ _ _ _ _ _ _ __ Expiration Date _ _ _" ' - " - - - - - - - - - - - - -

4. Identification of System _ _ ___,c"'hc=aeer..,,_,,,i.,_,n.,,__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code B31.1 19_5_5_Edition,_N_A_ _ _ _ _ _ Addend.!';-1 through N-13 Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19_~--

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Item# 318" Kwik Bolt HILTI 230397 NA 2-CH-Supports NA Replacement No

7. Description of Work _ _Fabricate,

_ _ _ _ _modify, _ _ _ _install ____ pipe _ _supports. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 L

FORM NIS-2 (Back) NA

9. R e m a r k s - - - . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization N o . - - - - - - - - - - - ~ - - - Expiration D a t e - - - - - - - - - - - - - - - - Signe~'-'~""-r-'~"'rr#-,"'n==e"'r"'*s"'o"'e"-s-ig-'?"'e"-e""','{-e....e,~"'1e'-------'tl!!Cu4.=e=-=...,..-:,.,..~=-"""-':.C::..::...,::____ Date _ _ _ ~_J_~I'_______ , 19 5'l CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have ~pected the components described in this Owner's Report during the period to ¢q~o I

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this i n s p e c t i o n ~ .- ~ ~ *

  ----+-..,_,,...._-=~...,_-+--+~~~------- Commissions _ _ _ _ _ _ _Va.                                                                                        ___  883

_ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National B9ard, State, Province, and Endorsements Date_ _ _~/~.;2.'=---'-'-/~~~~-19 97

Attachment 2 Page 44 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. ll/03/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _- : - : - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00357761-0l, RR#97-149 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r_g_i_n_i_a_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a l f f i l - - - - - - - - - - -

Name Authorization N o . - - - , = - - - - - - - - - - - - - Same as above NA Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ _ _......; Addre11 Reactor Coolant System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Copes-2" Trim Assembly Vulcan, Inc. NA NA 2-RC-PCV-2456 NA Replacement No

7. Description of Work __ R_ep_l_a_c_e_t_r_i_m_a_s_s_e_mb_l_Y_*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM-NIS-2 (Back) PO# CNT 555149 (2 11 Trim Assembly)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements m11de in the report are correct and this repJ aceroeot conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _~ N = A ~ - - - - - - - - - - - - , - - - - - - - - - - - - - - - - - - - , - -

 - Certificate of Authorization No. ---~N=A~----------Expiration Date ------=N,.A...___ _ _ _ _ _ _ _ __

Signe~ d O w , r e ~ n e a , Title

                                        * ./ 2S£;'                                     Date-~A'--'~,-+-------, 19                 72 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Bo*ard of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                           and employed by                     HSBI and I Co.                                   of Hartford, Ct.                                                              ,,e zpected the components described
                                                                                              ~ /D Of
                                                                                                ~}                      .   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any nianner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.A?,~

   ----.,,Gl.A-=-.-<->....::
                        ......__,___,...,."=-f-"<....C..---"--------Commissions _______V_a_._8_8_3___________
                    -   lnspac~                                                       National Board, State, Province, and Endorsements Dat.._e----~/~'/...,1      ,_/_~r'___
                                      .         19'77

Attachment 2 Page 45 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/03/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00371357-0l, RR#97-150 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_rg=-1-*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Starg& _ _ _ _ NA

_ _ _ _ _ __ Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _Reactor____ Coolant

_ _ _System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, * (Yes Component Manufacturer Seria*1 No. No. Identification Built or Replacement or Nol Copes-2" Trim Assembly Vulcan, Inc. NA NA 2-RC-PCV-2455C NA Replacement No

7. Description of Work Replace trim assembly.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT 555149 (2" Trim Assembly)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repJ aceroeot conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- - - - ' N ' - " A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. ---~N=A~__________ Expiration Date - - - - = N = A ~ - - - - - - - - - - Signed ~ t: ./. ~ V

          ~;;ner o r ~ g n e e , Title

Z-S.Z:- ..{;,L,µ#4,.

                                                           '¥-

Date~t:~'/-~___.~--4'--,=-~----, 19

FZ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. have :6pected the components described

                                                                                        -i-//v tJI
                                                                                          ~                          ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -------,ctli--:.,....,-~~-',--~~-1-+~~--------Commissions _ _ _ _ _ _ _V_a_._8_8_3___________

inspecic;r*s51gnatur~ National Board, State, Province, and Endorsements Date_ _----"/....,__,/ 1

                                    -+/ _19 97
                            ,__/71-'_

Attachment 2 Page 46 of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97

1. O w n e r _ - - - - - - - - - - , - - - - - - - - - - - - - Date Name 5000 Dominion Blvd., Glen Allen, Va. 23060 -1 1 Sheet of Address Surry Power Station Two

2. P l a n t - - - - - - - - - - . . , . . , . . . - - - ' - - - - - - - - - ' - - Unit N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00369117-01, RR#97-151 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ __;.v.a:.ir""g"'ia.:*n,;;,;:i:..;;a'-"'P""o"""w"'"er:;;__ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _."'"Na.:A_ _ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Sarne as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address Main Steam

4. Identification of S y s t e m ~ - - - - - - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - -

B31.1 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Casa (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ 89_ _

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code Repaired, Stamped Name of Name of Manufacturer Na~ional',

Board

                                                                                                              ..  ..      Other        *Year       Replaced,        (Yes Component            Manufacturer                                        s*erial No,          No.             Identification     Built   or Replacement or Nol i

I

                                                                                                                                                                                 . I Part#

Disc Anchor/Darling C31207 NA 2-MS-182 NA Replacement No

7. Description of Work Inspect and repair valve.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. ______° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (11 size is BY. in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) . This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-462702

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the.statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A________________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed

Q~~- - ~ Ow~-;Jgnee, JJ'.;:r Title D~--~~=z_l_)____~,19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have insp.,ected the components described in this Owner's Report during the period ~ /O ?7 to ,s-;Y~[D I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ---t,cz   ___yZ=~.....
                   .
                        - L L -_    -_~-_~

Inspector's Signature _ ~_~ _* 883 _ _ _ _ Commissions--,---,----v_a_.___ _ _-,----,---------- National Board, State, Province, and Endorsements Date // /;o I 10 97

Attachment 2 Page 47 of.78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07/97

1. O w n e r - - - - - - - - - - ~ - - - - - - - - - - - - Date Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet of Addreas Surry Power Station Two

2. P l a n t - - - - - - - - - - - - , - - , - - - - - - - - - - - - - Unit N11me 5570 Hog Island Rd,, Surry, Va. 23BB3 W0#00367064-0l, RR#97-153 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_....:.v=-ir=-g--'i==*na.::i:.;;a:....:.P""'ow-"-e"-'r=----------- Type Code Symbol Stamp _ _ _::;;NA:.:..._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - ' - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addre1&

4. Identification of System _ _ _ _ Main

_ _Steam _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31. i 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition,-----'-~--- Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19

89

6. Identification of Components Repaired or Replaced .and Replacement Components ASME

                                                 '                                                                                                      Code National
                                                                                                     ,,
                                                                                                        .                                Repaired,     Stamped
                                                                                          ' ' '" ~*-.,.~ ~ '

(Yes Name of Nania of Manufacturer Board* Other " Year Replaced, Component Manufacturer Serial No. No. Identification Built <fr Replacement or No) Part# Disc *Anchor /Darling C31207 NA 2-MS-176 NA Replacement No

7. Description of Work Inspect and repair valve.

8. Tests Conducted: Hydrostatic , Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp, _ _ _ _ _ _° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-462702

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date ---~N_A ___________ Signe ~~-.J. ,.b..23'...Z- ~ ( . / f t w ~ , s Designee, Title Date_--<-/,~'/,__/i_ _ _ _ _ , 19 J? CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,ct, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v irginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - - , - - , - , - + = - - - - - - h a v e i9spected the components described in this Owner's Report during the period                        ~//{!} 'Cl-, to      ~/ID IO /                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -------'-~"'--7"""'"---'J'-~-+--+-+~-~------Commissions _______v_a_.__                       8 _8_3_ _ _ _ _ _ _ _ _ _ __
                ~ t o r ' s Signature                                          National Board, State, Province, and Endorsements Date _ _ _ _ _ _          !_l-+/~(!~v_*__19  z::?

Attachment 2 Page 48 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date __l_l_/_2_5_/_9_7_ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet ___1_ _ of ___1_ _ _ _ _ _ _ _ _ __ Address Surry Power Station Unit __T_w_o _________________

2. P l a n t - - - - - - - - - - - - - , - , - - - - - - - - - - - - -

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00344933-02, RR#97-155 Address Repair Organization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. ___N_A_ _ _ _ _ _ _ _ _ _ __ Expiration Date _ _ _w;_ _ _ _ _ _ _ _ _ _ __

4. Identification of System _ _ _~F~e=e=d=w=a=t=e=r_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (al Applicable Construction Code B31. l 1 9 ~ Edition,-..:Nc:A.:....__ _ _ _ _ Addend.J1*1 through N-13 Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19_......,,'---

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Stud Mackson Inc. NA NA 2-FW-10 NA Renlacement No Nut Mackson, Inc. NA NA 2-FW-10 NA Replacement No 7, Description of Work. _ _R_e_p_l_a_c_e_f_a_st_e_n_e_r_s_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017

FORM NIS-2 (Back) PO# BNT-467650 (nuts), CNT-558078 (studs)

9. R e m a r k s - ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. re.pair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _____N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. have in~ected the components described in this Owner's Report during the period ~ to ,;:-;/IO7/I) I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. C.2<2~ Inspector's Signature Commissions _______V_a_._ 8_8_3___________ National Board, State, Province, and Endorsements Date_ _ _ _ _ _ ~~~"----c.f--/_o_ / 19 9;2

Attachment 2 f Page 49 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 11/17 ____ /97 _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 Addre1&

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00357265-0l, RR#97-157 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v"'i"'rg.,_ic..*n"'"i_a_P_o_w_er__,--------- Type Code Symbol Stamp ____N_A_ _ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ Main

_ _Steam _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55

NA N-1 through N-13 5.. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19-__8 _9 _ _

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code

National Repaired, _* Stamped Name of Name of Manufacturer' **Board
Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Seller Valve Vogt ID # 21633E NA 2-MS-266 NA Replacement No Energy Steel Ht# 1 1/2" Pipe & Supply Co. _ 230792 NA 2-MS-266 NA Replacement No

7. Description of Work _ _R_e_p_la_c_e_v_a_l_v_e_._c_o_d_e_c_a_se_N_-_4_1_6_-1_a_P_P_l_i_e_s_.- - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hy.drostatic

Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

F FORM NIS-2 (Back) PO # CNT-338169 (valve), CNT-486968 (1 1/2" pipe)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________

            /7 d ~~,er.

Signed'1-,?~

    -          OwnerorOer's Daslgnee, Title
                                              -e---

k ~:.£. Date _ _ _~/,~Y...,. 1

                                                                                                         ~~7~---, 19----9'-2_

CERTIFICATE.OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

                                                                                            ~ve {t')pected the components described in this Owner's Report during the period                                       to   S-:

r1

                                                                                             /i)~ /                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this
  . Owner's Report in accordance with the requirements of the ASME Code,_Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _______,C{)"""'"--'-'""""..,___,.' _-_g _,.~~~~~*-----Commissions _ _ _ _ _ _v_a_.__ 8 _8_3_ _ _ _ _ _ _ _ _ __

                     -  Inspector's Signature                                    Nations! Board, State, Province, and Endorsements Date

Attachment 2 Page 50 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/06/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo358378-01, RR#97-163 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_rg~i-*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Sta\rf _ _ _N::c:A:.:....._ _ _ _ _ __ Name Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ Charging

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Trim Part# Assembly (Plug) Copes-Vulcan 138120 NA 2-CH-LCV-2460A NA Replacement No 1 1/8" Nuts Mackson, Inc. NA NA 2-CH-LCV-2460A NA Replacement No 7 _ Description of Work Repair valve, valve leaks by.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Ottier D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

l FORM NIS-2 (Back) PO# CNT-530451 (trim assy.), BNT-467650 (1 1/8" nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A_.__________ Signed r ) .. p;(',fl W n ~ ~ n e e , Title

                                      ~,e       I~r        c.~&,,vP4               Date _ _...-:::...c..'41;/ 4~-----,          19  i'Z CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                     and employed by                       HSBI and I Co*

of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - , - - - - - , r - : , - - - - - - h a v e i9spected the components described in this Owner's Report during the p e r i o d - - - - - - ~ - ~ - ~ - - t o            7./IO,[O /                          , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                    /'Ao ~                    fr_

_ _ _ _ __,_<A.....,~~~=~~*-~~---~-~-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Inspector's Signature Va. 883 National Board, State, Province, and Endorsements Date

Attachment 2 Page 51 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As.Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/06/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addren Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit-------------------- Na.me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo365230-01, RR#97-164 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir--'g"-i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System _ _ _ _ Charging

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 5/8" Studs & Nuts Mackson, Inc. NA NA 2-CH-FE-2180 NA Replacement No

7. Description of Work __R_e_p_l_ac_e_f_l_a_n_g_e_g_a_s_k_e_t_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8Y:, in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) BNT-467650 (5/8" studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No, ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed ;;1_ t j ,t_/

           ~wnar o~Designee, Title fS'.Z-                                Date _ _______,/,_,/+4---------, 19        92 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State
          .

or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. haveJspected the components described

                                                                                      ~-:/IIJP I                    , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. fl/),~

  ------~~~-~~~,....____..-~,._-+-,,-...~------Commissions _ _ _ _ _ _ _                     Va.

___ 883 _ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National Board, State, Province, and Endorsements Date,_ _ _ _----'--)_1...,.,/_,_,.,?:;_ _19 9'7

Attachment 2 Page 52 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co Name soon Dominion Blvd Glen Allen Va 23060 Address

2. Plant_..,s,..,.., ...r ...r-'1,,_,_.P'"'......

o wc.oea..r,.._~S,.,t.....aau.t_,.,_*. _n.. _n.,_____________ Unit _ _,_....._,..__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Name 5570 Hog Island Pd Snrrv Va 23883 wa.uaa3s1aso-01 RR#97 165 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __;Vc.,1.,*r,.,g,_,ie.en!.-'i'-"a'---"P-"'o""w-"e-"r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _....,Nc!:.A.,___ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _c_h_a_r...:.g_i_n_g_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31 1 55 NA N-1 through N-13

5. (a) Applicable Construction Code

19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Copes- Part# rim Assembly (Plug) Vulcan, Inc. 131347 NA 2-CH-HCV-2200C NA Replacement No Nova Macn. Studs Products, Inc. NA NA 2-CH-HCV-2200C NA Replacement No Nuts Mackson, Inc. NA NA 2-CH-HCV-2200C NA Replacement No

7. Description of Work __I_n_s~p~e_c_t~/_r_e=p_a_i_r_va_l_v_e_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

,.

FORM NIS-2 (Back) PO# CNT-550160 (trim assembly), CNT-449104 (studs),

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached BNT-467650 (nuts) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. NA Expiration Date _ _ _ _N_A ___________ Signed(i).. J~A~ .:rs:z- ~ l l 4 Own~ ~Desrenea;=rltle Date_--../..,_-~'--d--------,19 ))

                                                                                                       ¥J-CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                     and employed by                    HSBI and I Co*                                    of Hartford, Ct.

have ~ected the components described in this Owner's Report during the period to '2~&,J>! , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this ..**'* Owner's Report in.accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ____..a~-..._.~o~*

                          *
                                .... ~-)J42~----+-~~~--~----Commissions _ _ _ _ _ _v_a_._B_B_3___________

Inspector's Signature National Board, State, Province, and Endorsements

                                               .     !i7 Date                   1&-)    ;    t:19~

Attachment 2 Page 53 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Vi rgi ni a EJ ectri c and Power Co Date _ _.J-"2..,/'-'0"-"3.J...+.../..,_9...i.7_ _ _ _ _ _ _ _ _ _ __

Name Sheet _ _.....1....._ _ of _ ___.._ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd Glen Allen Va 23060 Address

2. Plant __S...JuJ...r_.r'--J-l'-r--'P"'o"""""IA...lPcc.r..___s...t........aut_,...* ,._o..._n..____________ Unit _ _.......,_,___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5570 Hog Island Rd 23883 wo~aa1s1s41-a1 RR#97 166 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v:.aie.,r,.;:g,.,ic.cn:,eic.:::ac...:.P.::;o.::.w.:::e=.r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _....:Nc:.A.:....__ _ _ _ _ __

Name Authorization No. _ _~ - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _c_h_a_r_g_i_n_g_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31 1 55 NA N-1 through N-13

5. (al Applicable Construction Code

19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Copes- Pa.rt #

rim Assembly (Plug) Vulcan, Inc. 131347 NA 2-CH-HCV-2200A NA Replacement No Nova Mach. Studs Products, Inc. NA NA 2-CH-HCV-2200A NA R.;placement No Nuts Mackson, Inc. NA NA 2-CH-HCV-2200A NA Replacement No

7. Description of Work _ __cI::.:n::.:s-=p_e_c_t-'-/--'r_e.e.p_a_i_r_v_a_l_v_e_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is SY. in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-550160 (trim assembly), CNT-449104 (studs),

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached BNT-467650 (nuts) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, ____N_A___________ Expiration Date _ _ _ _N_A _ _ _ _ _ _ _ _ _ __ Signed ~ / ~ ~ < ' -?"~ Owne~~{}Des1gnee, Tffi'ii.i' Date _ _ _ _ /.-~.,._,,,___ _ _ _ , 19 1? CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. h/; ~ected the components described in this Owner's Report during the period to 5;u/,0 / , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -----..Ja'===-"-'--"(2"""",._*-1.-...,,~+-~-+-"'-=~c.....:c.....

____ Commissions_--,------V-a_.__8_8_3_ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date ;;i_/ ~

I 19 n

Attachment 2 Page 54 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co Date 12 / 0 3 / 9 7 Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address

2. Plant Surry Power st ab Name on Unit Two 5570 Hog Island Rd., Surry, Va. 23883 W0#00357848-0l, RR#97-167 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __;v..ciccr..=gc.ci.;;.;ncci...ca_P_ow_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp ____N_A_ _ _ _ _ _ __

Name Authorization N o * - - = - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _c_h_a_r_g_i_n_g_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Copes- Part#

rim Assembly (Plug) Vulcan, Inc. 131347 NA 2-CH-HCV-2200B NA Replacement No Nova Mach. studs Products, Inc. NA NA 2-CH-HCV-2200B NA Replacement No Nuts Mackson, Inc. NA NA 2-CH-HCV-2200B NA Replacement No Copes- Part# 0 ............. .,,. ... ,,,,, - -- Th- , -,noac:

                                                                                            "~    ?-CH-HCV-2200B          NA       Renlacement        No

7. Description of Work. __I_n_s..;;pc...e_c_t_;_/_r_e.::.p_a_i_r_v_al_v_e_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3l each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-550160 (trim assembly), CNT-449104 (studs),

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached BNT-467650 (nuts), CNT-555625 (bonnet) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________ Certificate of Authorization No. NA Expiration Date _ _ _ _N_A___________ Signed~ /~ ~ zr:z:: 6~~ Ownero~Designee, Title Date _ __,,l,:.._.~""7,--'---* 19 ?7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. haz inspected the components described

                                                                                               , fJ q/0 /                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                    /7)              ~         A"   <-f-1 A'                                         Va. 883
  -----"'"~~-=,-'-=--"--1.--,YYJ+-1Y4"--'-<<-.,_./l.):'.'.'."::"-l,'-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _- ' - - - - - - -
                    . Inspector's Signature                                           National Board, State, Province, and Endorsements Date,_ _ _ _            -'-'/d-~/'--<6=--_19  ??

Attachment 2 Page 55 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 12/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addreas Surry Power Station Two Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

2. Plant N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00361386-0l, RR#97-168 Addrea1 Repair Organization P.O. NgA Job No., etc.

Virginia Power

3. Work Performed by Type Code Symbol S t a r m ? - - - - - - - - - -

Name Authorizetlon No. _______________ Same as above Expiration Dete _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addreas Main Steam

4. Identification of System B31.1 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addende, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9 _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped

(Yes Name of Name of Manufacturer Board Other Year Replaced, Component Manufectu rer Serial No, No, Identification Built or Replacement or No)

Fisher Tag# Controls 2147450 NA 2-MS-PCV-202A NA Replacement No Stem & Plug Overhaul valve.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psl Test Temp, °F NOTE: Supplemental sheets In t'orm of lists, sketches, or drawings may be used, provided (1) size is 8% In. x 11 in., (2) Informs*

tion in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-524773

9. R e m a r k s - - - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. NA Expiration Date _ _ _ _N_A ___________ Signed /'Jc/1,//-=-~

          ~ ~ r ' s Deslgnee, Title
                                               ...:Z:S,:z= b6.-.,~.,-3e          Date _ _ _~/~=+--~--. 19                    72 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State
           .

or Province of Virginia and employed by

                                                                .                 HSBI and I Co.                                    of Hartford, Ct.

ha2 in~cted the components described

                                                                                          ;- /'a 'CJ I I     ;                   I and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ------+-&.:fu!_.,,,'-b,_.(A'""'"_,__r ~
                         /?/) _,,__,,_~~-----Commissions                                      Va. 883

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

                       -lnspectOr's ~                                           National Board, State, Province, and Endorsements Date

          - - -

Attachment 2 Page 56 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS*2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 12/06/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre1S Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo353099-01, RR#97-169 Address Repair Organization P.O. N~.!t Job No., etc. Virginia Power

3. Work Performed by Type Code Symbol S t a , Y R - - - - - - - - - - -

Name Authorizetlon N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Address Main Steam

4. Identification of System B31.1 55 NA N-1 through N-13 5, (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Fisher Tag# 2147450 NA 2-MS-PCV-202B NA Replacement No Stem & Plug Controls Overhaul valve.

7. Description of W o r k = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psl Test Temp. °F NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size is BY. In. x 11 In., (2) Informa-tion In items 1 through 6 on this report Is Included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) mey be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) 1.* PO# CNT-533186

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, ____N_A___________ Expiration Date _ _ _ _N_A---,-__________ Signet::2-L d_ Owner~lgnee, Title

                                              - :ZS% M ~                                 Date _ _--"-'/Z.=¥'-=-----,
                                                                                                              '

1ef 7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have inzected the components described

                                                                                                -r:;:§C; or                   ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                      //0 ~
      -----i~--,,C.-'d{...d__i....;.4-..__-,.._ __,_-"--=---=-------Commissions _ _ _ _ _ _ _        Va._ _ 883

_ _ _ _ _ _ _ _ _ _ _ __

                           ~lnspacto~                                                   National Board, State, Province, and Endorsements Date_ _--+-/~.)__-+--/~£"""----19 I

0

                                                                                                                                              --  -   - ---

Attachment 2 Page 57 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date_1_2_/_0_9_/_9_7_ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant _Surry _ _ _ _Power

____ Station _ _ _ _ _ _ _ _ _ _ _ __ Unit _T_w_o_________________ Neme 5570 Hog Island Rd., Surry, Va. 23883 W0#00363890-03, RR#97-173 Addre11 Repair Organization P.O. No., Job No., etc. Type Code Symbol Stamp _ _ _NA Virginia Power

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ __.....__ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System ____F_e_e_d_w_a_te_r_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (al Applicable Construction Code 831

1 19_5_ 5__ Edition,_NA_ _ _ _ _ _ Addendi.~ 1 through N-13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__.aa..2<--

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired;*. Stamped Name of Name of Manufacturer Board Other Ye~r

Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Energy n.: ..... .,. -

                                     &
                                   -- -            '"                       '"

Al/ r ..,...,...,..,...

                                                                                                             .- --      ...    - .- -
                                                                                                                                         *-~        "-

Replace pipe. Code Case N-416-1 applies.

7. Description of W o r k * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other O Pressure ______ psi Test Temp, * °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-557531

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization N o . - - - - - - - - - - - - - - - Expiration D a t e - - - - - - - - - - - - - - - - Signetla/C~~

Owner or O~Designee, Title

                                                    .n:z 4,au                                  Date _ _    __,/.'__
                                                                                                                 ""z.4

_,_______,19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~, .holdi.ng II valid commission issued by the National Board of_Boi!ru and P.ressur11. Vessel Inspectors and the State v1rg1n1a HSe1 ana 1 co. or Province of and employed by of Hartford, Ct. hay.a in,iiected the components described in this Owner's Report during the period to 'f;//(Ji.J2 I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this i_n_s_p-ec_t..1,a=n=.,......,"""'Q"'-....c_..,__,_~__,'--""~~f"~-=--"~~'------Commissions _______v_a_.__8_8_3_ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _ /~~__,I__/_,.c__ z 19 f7

Attachment 2 Page 58 of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/03/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - : - . , - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet of _ _ _ _ _ _ _ _ _ _ _ _ __ Addreaa Surry Power Station Two Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

2. P l a n t - - - - - - - - - - - , . , - - - - - - - - - - - - -

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00336464-01, RR#97-174 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r""g_i_n_i_a_P_o_w_e_r---------- Type Code Symbol StamiA_ _ _ _N_A_ _ _ _ _ __

Neme Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A _ _ _ _ _ _ _ _ _ _ __ Address Containment Spray

4. Identification of S y s t e m - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - -

B31.l 55 NA N-1 through N-13

5. (a) Applicable Construction Coae 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Casa (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 6" Pipe Tioga Supply I~c. NA NA 2-CS-MOV-202A NA Replacement No 6" Elbow Tioga Supply I~c. NA NA 2-CS-MOV-202A NA Replacement No Consolidated 6" Flange Power Supply NA NA 2-CS-MOV-202A NA Replacement No

8. Tests Conducted: Hydrostatic Pneumatic D Nomi~al Operating Pressure W Other O Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO#* CNT 525276 (6" Pipe), CNT 525150 (6 11 Elbow); .

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CNT 556078 (6 11 Flange) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section x I. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ______ N_A__________ Expiration Date _ _ _ _N_A__________ Signed /1._ ~ /1_ ~

          ~ n e r o r ~ e e , Title

TJ':C Date-~~-,-~_¥__,_/ _ _ _ _ _ _ _ , 19 22 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of

_______H_a_r_t_f_o_r_d_,_C_t_.----------r=--r-=-------haye i9spected the components described in this Owner's Report during the period-----~-~-..__..____ to ~/L.0(0/ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind _arising from or connected with this inspection.

  ----'--'-'---._,...,~_."",

__..L/=-o.-- --hp..___,-.__,

                                                     .......;;t'-=-*
                                                                 ....~'------Commissions _ _ _ _ _ _ _V_a_._8_8_3___________
                   * ~?c,;.;:Signature                                                        National Board, State, Province, and Endorsements Date

Attachment 2 Page 59 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/03/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blyd. ,. Glen Allen,. Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00336465-0l, RR#97-175 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by Virginia Power Type Code Symbol Sta~ ____N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date_......,._N_A_ _ _ _ _ _ _ _ _ _ __ Addre111 Containment Spray

4. Identification of System B31.l 55 NA N-1 through N-13 5, (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped

-..

Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol 6" Pipe Tioga Supply I ~c. NA NA 2-CS-MOV-202B NA Replacement No Consolidated 6" Flange Power Supply *NA NA 2-CS-MOV-202B NA Replacement No

7. Description of Work Cut, modify, and install piping for replacing valve .

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form. (12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT 525276 (6" Pipe), CNT 556078 (6" Flange)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this rep) aceroeut conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- - = N . : : A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. ----=-N-"'A=------------Expiration Date _ _ ___,N=A~---------- SigneQ c.f. L~d.L Owner or~s'i:fesignee, Title

Z-Sf ,:.~_,c!&(t Date-~/~'/+-41-+------,19 P2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. h~ spected the components described

J 0

                                                                                              ,'lJ,, tJ I'               , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ______,a._.."=* ....c ;--'le--#*-~~---~"'- z-. _..._______ Commissions _ _ _ _--,-_ _V_a_._8_8_3___________ Inspector's Signature National Board, State, Province, and Endorsements Date // loL! 7 19 1)

Attachment 2 Page 60 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name

                                                                                        ~=o 5000 Dominion Blvd., Glen Allen, Va. 23060                                             1              1 Sheet              of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station

2. Plant Unit Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00365700-0l, RR#97-177 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir'"'g""i_n_i_a_P_o_we_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ AddreH Main Steam

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Casa 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of 1 Manufacturer Board* Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Schutte & Disc Koerting NA NA 2-MS-RV-lOlA NA Replacement Nq Stud Mackson Inc. NA NA 2-MS-RV*lOlA NA Replacement No

7. Description of Work _ Repair

____ PORV. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT-554063 (disc), BNT-467650 (7/8" stud)

9. R e m a r k s - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the _ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ s;,,ooQ;l.~~"~r.:z- Date _ _~/,~~+~-t=-----, 19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - , - - - r = - - - - - h a v e ilJ,Spected the components described in this Owner's Report during the period                                          to    2;~@ /                        , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                     /-J0 (";                         /'fh.. )
                   ~'-~Commissions--,-----,------,---........,----,---,-------,---------

Va. 883 insiector's Signature National Board, State, Province, and Endorsements Date,_ _ _ __,/....,_/+-6---'0""---Lb-"-----19

7/

Attachment 2 Page 61 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - . , . . , . . . - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address Surry Power Station Unit _Two _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

2. Plant _ _ _ _ _ _ _ _ _ _- - : - , - - - - - - - - - - - - -

Neme 5570 Hog Island Rd., Surry, Va. 23883 W0#00365793-0l, RR#97-178 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v""1.""*r""g""i'"'n"'i""a'-=-Po=-w"-e""r'----------- Type Code Symbol Stamp _ _~N=A~-------

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date ___N _ A ~ - - - - - - - - - - - Addre1&

4. Identification of System ____R_e_a_c_t_o_r_c0_ 0_l_a_n_t_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code 83 1. 1 19_55__ Edition,_NA _ _ _ _ _ _ AddenJt 1 through N-l3 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other *Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 1 3/8" Studs

        & Nuts            Mackson,    Inc.         NA                       NA   2-RC-SV-2551A           NA      Replacement         No

7. Description of Work Remove safety valve for testing and reinstall.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) P. 0. BNT-467650 (1 3/8" studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. _ _ _ _ N_A___________ Expiration Date _ _ _ _N_A___________ Signed'2~ ~ ~ .T.ff 4~~ Owner orOw'sOesignae, Title

//~

Date---~-~4-'""Z-2---+------, 19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~,, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of virginia and employed by HSBI and I Co. of Hartford, Ct. hj;'.,8 ~spected the components described "J I D; iJ I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                   /]/)                  ~""'            ~"'

Va. 883

  ------'~-=--',l,<~"-+----,.......,~-fl/Yv(/(./'-+-'<-.::....--V-___ c o m m i s s i o n s - - - - - - - - - - - - , - - - - - - - - - - -
                                                                   '--'
                     -lnspector'sSigatu~                                                  National Board, State, Province, and Endorsements Date._ _ _ _ _ _              ,_1-+/_1_0__19 7'7

Attachment 2 Page 62 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#o0365794-0l, RR#97-179 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __;_V=.i::.rg.i.;1::.:'n::,:i:.;:a;;_;;;P..=o.:.:.w.=er::.__ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.::N::Ac....__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _ _ Reactor

_ _ _ Coolant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 1 3/8" Studs

        & Nuts            Mackson,                       Inc.                      NA                      NA     2-RC-SV-2551B         NA        Replacement        No 7, Description of Work Remove safety valve for testing and reinstall.

8, Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) P. O. BNT-467650 (1 3/8" studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v irginia and employed by HSBI and I Co* of Hartford, Ct. h9ve ~cted th~ponents described in this Owner's Report during the period '5°I '[) '1 to ,;-;//~f'?'-.? 01 ,~/lfl'1j , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                   ~-C                           ,--f ~
  ------"-~~"-""'=,_.,...__....,-cc._:?)JJ.-4-F-c,,_,.~'-""---'C.-----Commissions _ _ _ _ _ _ _    Va.

_ _ 883 _ _ _ _ _ _ _ _ _ _ _ __ Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _ _ _ ! __19 Y) r_,J~/~i) I

i I Attachment 2 Page 63 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/06/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - . , . . , . - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. P l a n t - - - - - - - - - - - - , - , - - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00365795-0l, RR#97-180 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v.:...i:.:*r:..ga.:i:.:.n:..:ic.::a:_:.Po=.w::.ce:.:r;_,._ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _N_A _ _ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 1 3/8" Studs & Nuts Mackson, Inc. NA NA 2-Rc-sv-:i.,s51c

                                                                                                                            ..,-... -    NA       Replacement        No

7. Description of Work Remove and reinstall safety valve for testing.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) BNT-467650 (1 3/8" studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - - Signed (}~ft ~ :Z:-S'f b4,~4t'. Owner ~ e s i g n e e , Title Date_~/,~'/~~'6 _ _ _ _ _ _ ,199:'7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,q.,holdjng 1l valid commission issued by the National Board of_ Boiler and dPres_sure Vessel Inspectors and the State virginia HSBI an 1 Co. or Province of and employed by of Hartford, Ct. *

  - - - - - - - - - - - - - - - - - - - - - - - - : : : ; - - r - - ~ = - - - - - h a ? ' - ic~ected the components described in this Owner's Report during the period                                        to     ~tL..i:/~     I                 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                   ,,/7/) ~ ---fT_

Va. 883

  --"'-=-GL~~(dc.L......L...._,c-?.J-~~-"'-'~'-----Commissions _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date

Attachment 2 Page 64 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. 0 wner -Virginia Electric and Power Co.

                -----------------------

Date _ _11/25/97 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ N!3me 5000 Dominion Blvd., Glen Allen, Va. 23060 Address

2. Plant _ _ Surry

_ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Two Unit-------------------- Name ),,t .J. 5570 Hog Island Rd., Surry, Va. 23883 W0#003 7 5533 -of. RR#97-198 11/iis"/f/7 Address Repair Organization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. ___ NA _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _= - - - - - - - - - - - - Address

4. Identification of System _ _ _-=s-=ac:f-=e-=t..,_v---=.In'-'-'-*e=-c=-t"-'1"-'o

                                                                                * "-'n-'--------------------------------

5. (al Applicable Construction Code B31.1 19_5_5_Edition,_N_A_ _ _ _ _ _ Addenda'J*l through N-13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_~--

6. Identification of Components Repaired or Replaced and Replacement Components ASME

                                                                                                               ".*   -**. **.                           Code National                                        Repaired,     Stamped Name of                Name of                   Manufacturer                     Board               Other            Year      Replaced,       (Yes Component            Manufacturer                    Serial No.                     No.            Identification       Built  or Replacement or No)

C<-, ,.1 M;::ickson Tnc. NA NA 2-SI-94 NA Replacement No

                                                                                                 . --

Cardinal Nut Ind. Products NA NA 2-SI-94 NA Replacement No

7. Description of Work _ _ R_ep_l_a_c_e_s_t_u_d_a_n_d_n_u_t_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017

FORM NIS-2 (Back) PO# BNT-467650 (stud), CSY-264274 (nut)

9. R e m a r k s - - - . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - -NA -------------- CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have Yt.spected the components described

                                                                                                     'r,l/t>,  ()1                  , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ _ ___.cQ_~-=~1_,.n~sp-1e"'~c'A-to-r'~sll's4~_,"'n4.c.,a"'t~'-'u""re~'-------Commissions _ _ _ _ _ _ _ V_a_._B_B_3___________

                                              ,i(i                                            National Board, State, Province, and Endorsements Date _ _ _ __,/--';i_~/_0__.__/_19                          77

Attachment 2 Page 65 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#o0375948-01, RR#97-206 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir~g~1-*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Sta\rf----'N:c.:A.:....__ _ _ _ _ __ Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ N_A_ _ _ _ _ _ _ _ _ _ __ AddreH Reactor Coolant

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _" - - - - - - - - - - - - - - - - - - - - - - - -

B31. l 55 NA N-1 through N-13

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 1g, __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Stud & Nut Anchor/Darling NA NA 2-RC-MOV-2595 NA Replacement No

7. Description of Work Replace bonnet stud.

8. Tests Conducted: Hydrostatic

Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Tem'p, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY, in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO # CSY-154208 (nut), CNT.:-450013 (stud)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of ~uthorization No, _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ __ Date _ _......./."--'1/'----2'--------, 19 9? CERTIFICATE OF INSERVICE INSPECTION I, the undersigne.d,, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v irg'inia and employed by HSBI and I Co* of Hartford, Ct.

                                                                                         ~hJiv~ ;inspected the components described in this Owner's Report during the period                                       to ,;!L.C;/0 1                          , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  -----~/'fi'=-t:,..a~-+-~~--*-=Pv~-------Commissions _______                                v_a_._8_8_3_ _ _ _ _ _ _ _ _ __
                  ~or'sSlgnatu~                                                National Board, State, Province, and Endorsements Date

Attachment 2 Page 66 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date_l_2_/_0_9_/_9_7_ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit __ T_w_o_________________ N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00356923-02, RR#97-207 Addre11 Repair Organlz11tlon P.O. No., Job No., ate. Virginia Power

3. Work Performed by _ _ _ _ _ _ _ _...,..._ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _NA _ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _......,..,.__ _ _ _ _ _ _ _ _ __ Addr1111

4. Identification of System ____R_e_a_c_t_o_r_c_o...;o:..:l:..:a;.;.;n:..:t_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code B3 1. l 19_55__ Edition,_N_A_ _ _ _ _ _ Addendii: 1 through N-13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__,s"-"'9'---

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

See Flanae Bolts /4\ West* ,..,,,....1-,,...., ,,..e o----'*- "~ ?-DC-D-'C "A Re,....lacement No Replace main flange gasket.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# NS-27102 (bolt SN 9259, 9285, 9441, & 9255)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - - - - - - - - - - - - - - , . . . . - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Signed Q,£.., L _'4~ . If£' fAttl,,,rd-:!-4 Owne~wner's Oesignee, Title Date _ _ _.:./.-=:~_.___,------,, 19 92 ~' CERTIFICATE OF INSERVICE INSPECTION \, I, the undersigne$11 .holdi.ng !I valid commission issued by the National Board otBoiler and P-1essure. Vessel Inspectors and the State v1rg1n1a HSB~ ana ~ co. or Province of and employed by of Hartford, Ct. have in,sl}ected the components described in this Owner's Report during the period to 5-;l!vro I

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                        /'la         r---,

Inspector's Signature

                                                   * --f-J .                                         Va . 8 8 3

_ _ _ _ __.{,,l-""'_,_""=->-.,.,>-~-L-~~--------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ National Board, State, Province, and Endorsements Date,_ _ ~/_c)-... __ I

                                      / _7_19          72

Attachment 2 Page 67 of 78 Serial No.: 97*709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date_1_2_/_0_9_/_9_7_ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 Surry Power Station Unit _T_w_o________________

2. P l a n t - - - - - - - - - - - : - : - - - - - - - - - - - - -

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00357205-0l, RR#97-208 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ Virginia

____ Power_ _ _ _ _ _ _ _ _ __ NA Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ __ Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _. . . . . , , " ' - - - - - - - - - - - - Addra11 . 4. Identification of System _ _ _...:R-"e...:ac..;c_t_o.c;.r_c_o_o:.:l:.:a:::n:.::t_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5, (a) Applicable Construction Code B3 l. l 19_55__ Edition,_N_A_ _ _ _ _ _ Addenclii~ 1 through N- 13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19-'8""'9'---

6. Identification of Components Repaired or Replaced and Replacement Components ASME

                                                                                                                           ,.                                Code National                                        Repaired, ,. Stamped Name of               Name of                      Manufacturer                    Board              Other          Year        Replaced,         (Yes Component            Manufacturer                      Serial No.                    No.           Identification     Built    or Replacement or Nol
                                            '

See Flange Bol°ts (9) Westinghouse Remarks NA 2-RC*P*lA NA Replacement No Remove/install/restretch main flange bolts.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (21 informa-tion in items 1 th.rough 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

                                                         --  - - -

FORM NIS-2 (Back) PO# 86182 (bolt SN 13436), PO# 27102 (bolt SN 9280,

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached 9277, 8282, 9281, 9453, 9446, 9447, & 9449) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement NA Type Code Symbol S t a m P - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signed (2--t ~ _z:r'.L Owner o ~ ner'sDesignee, Title

                                                                 .6,.,4 ,a.Ed_                 Date _ _    ---'l'-°='-/j--4------,   19  92 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 .holdi,ng ;:i valid commission issued by the National Board of Boiler and Pdres1ureCVessel Inspectors and the State v1rg1n1a                                                            HSeI an ~ o.

or Province of and employed by of Hartford, Ct. hayein;pected the components described in this Owner's Report during the period to 0/U,!f) I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                          /70 ~ ---hf __ commissions _ _ _ _ _Va.
  --------'.C.lJ,...,,,.....~L?'"""'"___,_.-~......,__...,._,W~~V_l/_V'--

883 _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date

Attachment 2 Page 68 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/12/97

1. Owner _ _- ' - . - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address 2. Surry Power Station Plant _ _ _ _ _ _ _ _ _ _..,.,.._ _ _ _ _ _ _ _ _ __ Two Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00368000-01, RR#97-209 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i_rg"'-1-*n_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Staw.r-*_ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addreas

4. Identification of System _ _ _ _ Vents

___ and _Drains _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31. l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part# Plug Fisher Control, 11A5314X03 NA 2-DG-TV-208A NA Replacement No

7. Description of. Work _ _R _ e _ p _ a _ i r _ v _ a _ l _ v _ e _ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# SSY-335931

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Date Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - -NA -------------- Signe~~ ~ Owner or ownfr'.~Tunee, Title ff.5:Z- Date _ _ _/,,_,'__/ ;{~k~----, 19 $? CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. hd pected the components described

                                                                                       ? I '?D  0DI                   '

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                ~-.~~                                                                       Va. 883
  -----<cc~=--"-'-'<=,-""'--+**-~+--++-~1/V~~~-"--W"-l"-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, end Endorsements Date

Attachment 2 Page 69 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

  . Owner Virginia Electric and Power Co.                                                   Date_l_2_/_0_9_/_9_7_ _ _ _ _ _ _ _ _ _ __

1 Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _____1 of _ _ 1_ _ _ _ _ _ _ _ _ _ __ Addre11

2. Plant _Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Two Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00376203-0l, RR#97-212 Addre11 Repair Organization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ __...,NA"=------------ Addre11

4. Identification of System ____R_e_a_c_t_o_r_c_o_o-'l'-a-'n'-t------------------------------

5, (a) Applicable Construction Code B31 ** 1 19_5_5 _Edition,_N_A_ _ _ _ _ _ Addendt 1 through N- 13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_8"-'9'---

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Canopy ABB Combust. Task#

      ,la~1  r1 ~--
                          .., _ _ .!,..., ___ _! _ _

onnococ

'"

o_n~_n_,

                                                                                                                   '"       n~-1 ~-~ ,=,...,+-    ,,~

Install CRDM housing canopy seal clamp.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-561433

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Signed /7,/ / 'e(L_/ f ;7

          ~rol&e,J:?si5esignee, Title                                             D~---~-~4~-----,199~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 .holdi,ng II valid commission issued by the National Board of_Boiliu and P-1essure. Vessel Inspectors and the State v1rg1n1a HSB~ ana ~ co. or Province of and employed by of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - = , - - . . . , , , - - - - - - - h a v7_i.n~ected the components described in this Owner's Report during the period------.r...,'-'--=.'--._,.__to                  2"/IV/0/                       , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _____..,c-_u_£.>-~"""-' ~

                  ./'-7/0"--,:..'-~F-,"'-"-=-=-----Commissions_....,.........,              Va. 883

_ _ _ _ _ _ _ _ _,--_ _ _ _ _ _ _ __

                   ~specter's~                                                  National Board, State, Province, and Endorsements Date_ _ _ _ _/<-=-o/.+/---1'9'--_19 I      I 9"7

Attachment 2 Page 70 of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 11/07 /97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. P l a n t - - - - - - - - - - - - , - , - - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo369714-01, RR#97-214 Address Repair Organization P.O.* No., Job No., etc.

3. Work Performed by _ _ v_ir~g=-i-*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Stai;p.f---N_A_ _ _ _ _ _ __ Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System _ _ _ _ Main

_ _Steam _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31. l 55 NA N-1 through N-13

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board

                                                                                  .*.        Other          Year        Replaced,        (Yes Component            Manufacturer               Serial No.          No.           Identification     Built    or Replacement or No)

Studs & Nuts Mackson, Inc. NA NA 2-MS-SV-204C NA Replacement No

7. Description of Work Remove, test, reinstall safety valve.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

I FORM NIS-2 (Back) P. 0. BNT-467650 (1 3/8" studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _. . = N . : : A ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A___________ SignedJ£.- _d,, ~4/ O ~ ~ r ' s Designee, Title Zsr d'l'ltv.v~ Date_,._/l.....,,.,...4----+-------, 19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. hai iVi?ected the components described in this Owner's Report during the period to '>, ij~ I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

    ---------'<ca,,,..£4,><""'-'i.----!-')aqi-+--JC-..J'..
                                                      '--"'Ac.i.~.::.*-"'-------Commissions _______v--,--a_.__8_8_3____________

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _ _ _ _ /,;'--D

                                          /~('-

l __19 r2

Attachment 2 Page 71 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date_l_2....c/_1_5....;/_9_7_ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _l___ of ___l _ _ _ _ _ _ _ _ _ __ Addre11

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit Two Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00369715-0l, RR#97-215 Addre11 Repair Org11nlzetlon P.O. No., Job No., etc. Virginia Power Type Code Symbol Stamp ____ N_A_ _ _ _ _ _ __

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. _-:;N:c;A:....__ _ _ _ _ _ _ _ _ __ Expiration Date _ _~A.------------

4. Identification of System _ _ _~M=a=i=n~st~e=a=m"---------------------------------

5. (a) Applicable Construction Code B31. i 19_55__ Edition,_NA _ _ _ _ _ _ Addenda;l through N-13 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_a""'9,....__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or No) c~ ,,ci_

M--'*--- Tnr hl~ hm ?-M" .cu oner-

                                                                                                              ""      o-~1---           hln Nuts             Mackson,    Inc.        NA                     NA      2-MS-SV-205C                 NA      Renlacement       No Replace fasteners.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ __ SignedQ.£ j/_ - :. , . O w ~ e s l g n e e , Title

rrr bl<fj,,vcM Date _ _ _~/~=ri-~~----, 19 ?'2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 t,olding ~ valid commission issued by the National Board of Boiler and P.res1ur1L Vessel Inspectors and the State

               .               v1rg1n1a                                                     HSBl anal co.

or Province of and employed by of Hartford, Ct. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ have inspected the components described in this Owner's Report during the period-----~,:~c=--/......,,,2'"'1,../....._*f'...Z __ to /c/24/97 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 111..l/:!- lt7

                                                                                                                    'I 1./J. Jo#P'

_..;./N..e..*-=-°"'=*;:,:t~....~'-'---'~~~=*--------Commissions _ _ _ _ _ _v_a_._~ __,-----,---l;"?",,~-A:~-- 1nspector's Signature National Board, State, Province, and Endorsements Date_ _ _~o~--~~"'~~Z.~?~___19 'f Z

Attachment 2 Page n of 78 Serial No.: 97*709 Docket No.: 50*281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virginia Electric and Power Co. Date_1_2_/_1_5_/_9_7 _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant Surry Power Station Unit _T_w_o_________________

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00365797-0l, RR#97-216 Addre11 Repair Organization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by Type Code Symbol Stampe.*- - - - - - - - - - -

Name Authorization No. _ _.c;N;;.;A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _- " ' - " - - - - - - - - - - - - Addre11

4. Identification of System Main Steam

5. (al Applicable Construction Code 831

1 19_55__ Edition,_N_A_ _ _ _ _ _* Addendii~ 1 through N- 13 Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19._.,_a9,___

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes

      .Component              Manufacturer              Serial No.         No.            Identification             Built or Replacement or Nol "r""~            M....,....,1- -   ~--         ...                    "
                                                                                       ')_MC'.l_l'.'l"!T_"'J""""-.
                                                                                                                      '"    n - ...... 1 ~ enr     ,,~

Nuts Mackson, Inc. NA NA 2-MS-SV-202B NA Replacement No Replace fasteners.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (21 Informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030I may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 J

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __

            / 1 . / ~'4.& --

SigneM..£ U-,....1. .;L~ c' ~

                                                           ,,:;:;;,.~tf,u<'66¢           Date _ ___./'--'~"'T--'c,,<~------, 19        92 Owneror~r7s Oesignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 .holdi.ng ll valid commission issued by the National Board of Boiler and P1essure Vessel Inspectors and the State virginia                                                       HSBI ana I Co.

or Province of and employed by of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - - , - - , - - - - - - - h a v e injPected the components described in this Owner's Report during the period                                ,c/µ/'jlz       to        /<.l/i!,.t./£z-            , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. tt;l,Y ~ ' 7

  -----'~--""'--~-~,._'....,.'-~JF=~.C.......C=-*_ _ _ _ _ _ _ _ _ Commissions _ _ _ _ _ _v_a_._~--------~-."....,M7"'A~*_

Inspector's Signature National Board, State, Province, and Endorsar?ients Date_ _ _~fi~~,,-c_~Z,._L~_ _ _19 S-7

Attachment 2 Page 73 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

 , . Owner Virginia Electric and Power Co.                                                  Date_1_2_/_1_5_/_9_7_ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _1___ of ___ l ___________ AddreH Surry Power Station Unit _T_w_o_________________

2. P l a n t - - - - - - - - - - . . , . , . . . - - - - - - - - - - -

Neme 5570 Hog Island Rd., Surry, Va. 23883 W0#00365798-0l, RR#97-217 Addre11 Repair Organization P.O. No., Job No., etc. Virginia Power

3. Work Performed by _ _ ____ _ _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _ NA _ _ _ _ _ _ _ __

Name Authorization No. _ _NA_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _- ' " ' " - - - - - - - - - - - - Addre11

4. Identification of System ____M_a_i_n_s_t_ea_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code B31.i 19_55__ Edition,_NA _ _ _ _ _ _ Addend1i~ 1 through N-l 3 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19-s....9,.___

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

_q1-,,c1~ M-...-.1..- ..... -.-. T-- '" wn ?-MC-CU-?nCH>

                                                                                                                   '"       0= ...... , =,...=....,= .... +-    "

Nuts Mackson, Inc. NA NA 2-MS-SV-203B NA Reolacement No Replace fasteners.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Ya in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ __ Signed r{) ./. j} ;.vv' f Owner~s Designee, Title XZ- ~4t&tt:a, Date _ _ _~/..=~,._....

                                                                                                                                .....
                                                                                                                                 ,:  _ _ _ _ _ , 19       £2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 .holdi.ng ii valid commission issued by the National Board of Boiler and P.res.&ure. Vessel Inspectors and the State v1rg1n1a                                                                   HSB~ ana ~ co.

or Province of and employed by of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - , - - - , - - - - - h a v e inspected the components *described in this Owner's Report during the period                                                ,ID /2,  1/~7 to                ./~ /~ k / F Z           , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty,-expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. /J,'/~ J -~..l~ ,i/1,Jl/v

  ---~....:C~...::.,<:;.~__:~::c:*,-.,./_....:;~.=...L-<<"-~~:__..::;_*_*_ _ _ _ _ _    commissions _ _ _ _ _ _v_a_.-*-~-=--,---------,;.,,:.;.:...<:L---

1nspector's Signature Date_ _ _ _.J<L) ...* <-r,__,,,c__z=-cz,,____19 Y7

Attachment 2 Page 74 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date_1_2_/_1_5_/_9_7_ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit _T_w_o_________________ Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00365799-0l, RR#97-218 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ Virginia Power

_ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ __ Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _- " ' " ' - - - - - - - - - - - - Addre11

4. Identification of System _ _ _...:M.;.:ao.:i:.:cn'-"'s..;:.t.;;;.ea""m"'"---------------------------------

5. (al Applicable Construction Code 831

1 19_55__ Edition,_NA _ _ _ _ _ _. Addendii~ 1 through N-l 3 Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19_8"""9"--'--

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or Nol Studs Mackson Tnc "'~ '" ?-Mc-sv- 0 0* 0 NA Renlacement No Nuts Mackson, Inc. NA NA 2-MS-SV-204B NA Replacement No Replace fasteners.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure [J Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030I may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - Signed /1.. i _) -t.&k-:

          ~ner o~er's Designee, Title J:"f:£ 4/Gtv//a                      Date        /d..i.r*                      , 19 ~   2 CERTIFICATE OF INSERVICE INSPECTION I, the undersignefi, .holdi.ng II valid commission issued by the National Board otBoile.r and P.res:;ure. Vessel Inspectors and the State v1rg1n1a                                                        HSB1 ana 1 ~o.

or Province of and employed by of Hartford, Ct. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ have inspected the components described in this Owner's Report during the period r&/21/jt7 to ,1ch41fz , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this

                                                                                                        ?".-< y mP/:

inspection.

                                                                                                                 ;'ihz- s;7
  ---~~""--~~4"~£~--~~~~~~--~-_____ Commissions _ _ _ _ _ _v_a_._!J.8_~                                    __,----~,J<z;.,.-~~lll"-'-A:~-

1nspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _./)"'"",-:..Jt;..___.,,,2=-"=----19 9,7

Attachment 2 Page 75 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. "Date_1_2_;_1_5_/_9_7_ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _1___ of ___ 1 _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00369713-0l, RR#97-219 Addre11 Aepelr Organization P.O. No., Job No., etc. Virginia Power NA

3. Work Performed by Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _--"'NA.,__ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System Main Steam

5. (a) Applicable Construction Code 831

1 19_55__ Edition,_NA_ _ _ _ _ _ Addenda, N-l through N* 1 tode Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_8""9'---

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

                                            ....         ...                                                           -   , __ -->-

C'h,,.an M-.,-,1..-.-- -

                                                                                '"      "  M~  n,  on"~
                                                                                                              '"                           "-

Nuts Mackson Inc. NA NA 2-MS-SV-203C NA Reolacement No

7. Description of Work Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ N_A___________ Expiration Date _ _ _ _N_A___________ SigneQ L,r Owneror~'sDesignee, Title

                                                                    ~g,~-< _:::r-s_r         £~~~                  Date _ _~/.-~+-'-'t"f~----, 19                       9")

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State virginia HSBI and I Co. or Province of and employed by of Hartford, Ct. have inspech the components described in this Owner's Report during the period-------,,,,.j~c~O~G-1~",,.~~9~Z __ to ,c/24, Z I and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither-the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. n-1&

              .A-.?.;;, /                         A~                                                                            Va.~
                                                                                                                                       '-/;Z.1/ 1 .,,,;a/'l7
                                                                                                                                                          *,:: ,v,1.
                                                                          .==..________ Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _---'...
                            -'~"-'<<4*"""'c...e...~£....,"'--'..."'1F'.""~==-*

__,~e:::.....,c.....,?c..._' =.-~,._,e..y.-.L!!!..___ _ Inspector's Signature National Board, State, Province, and Endorsements Date,_ __,_L)=*....,_r....,,t:.<--__._2....,Z."'---_ _ _19 17

Attachment 2 Page 76 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date _1_2..c/_1_5_/:__9_7_ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant _Surry

_ _ _ _Power ____ Station _.,.,.._ _ _ _ _ _ _ _ _ __ Unit __ T_w_o_________________ Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00369712-0l, RR#97-220 Addre11 Repair Orgenlz11tlon P.O. No., Job No., etc. Type Code Symbol Stamp _ _ _NA Virginia Power

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _........__ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _-'M"-'a::..:i:..:n=-...c:s.::t.::e.c.:am=--------------------------------

5. (a) Applicable Construction Code 831

1 19_5_5 _ Edition,_N_A_ _ _ _ _ _ Addenda, N-l through N- 1code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_s.,_9..__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National

                                                                                      ..                               Repaired,          Stamped Name of               Name of            Manufacturer         Board              Other              Year      Replaced,            (Yes Component            Manufacturer          Serial No.           No,           Identification         Built  or Replacement or No)

Studs M~-'*--- Tn~ Mh ,rn ?-M"-'"'-?Q?C ,rn Re . . . . lacement No Nuts Mackson, Inc. NA NA 2-MS-SV-202C NA Replacement No

7. Description of Work Re lace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Sig~eW~ / _ A/_,- 5 f f~4{,d~ Date _ _----'/,..c;~-r"'.__ _ _ _ _ , 19 f Z O ~ s Deslgnee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v irginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - , , - - - - , , - - - - - - h a v e inspect~ the components described in this Owner's Report during the period _ _ _ _ _               ~/~c-/.~.z-*-,:1~A-J:...
                                                                                         *z~-to         ;rch 6./fz                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. /11} A, .

                                                                                                                   ~241 ;7,/l-i./5'7
  ---'~'----=:.......c--~-'----'
                                 /   /~~
              ~ . . .....k=----,,.-"-'.;.-.,_,.C"---'=------------Commissions            ______             _ _~

Va. ?:- 'V/1 --- _ _ _ _ _ ___,,,"",,,_,.,_,,Y-~' 1nspector's Signature National Board, State, Province, and Endorsements Date_ _ _~/J~r-*e~~'=**=z,___19 77

--

Attachment 2 Page 77 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date_l_2_/_2_2_/_9_7_ _ _ _ _ _ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11

2. Plant _ Surry

_ _ _ _Power _ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ Unit _T_w_o_________________ Nlime 5570 Hog Island Rd., Surry, Va. 23883 W0#00369711-0l, RR#97-221 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ Virginia Power

_ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ __ Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _.........__ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System ____M_a_i_n_s_t_ea_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code B3 1. i 19_55__ Edition,_NA _ _ _ _ _ _ Addenda, N-l through N* 1code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_8"'9"---

6. Identification of Components Repaired or Replaced and Replacement Components ASME I Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

          "'"""~          M,::,-1----   T~-            Mh
                                                                              '"      O.M~   ~n.,n,~
                                                                                                             '"       n~-i ~---ent-. No Nuts             Mackson,      Inc.           NA                     NA      2-MS-SV-201C           NA       Replacement        No Disc             Dresser                      ACV17                  NA      2-MS-SV-201C           NA       Replacement        No

7. Description of Work Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in,, (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts), CNT-538440

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached (disc) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Cod~ Symbol Stamp _ _ _ _ _ _NA _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~1 holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

or Province of virginia and employed by HSBI and I Co. of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - h a v e inspected the components described in this Owner's Report during the period----~"~*~c_/~u-*"'/;""""1'-2~--tO                 /r,/Ufl7                 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  --"'db'--*                      --~~-*_______ Commissions _ _ _ _ _ _v_a_._4_ 2_ 4_ _ _r_,_N_,_A____
              "-*-~~~.d..,_,p.""'*~-*~~~*

lns~ector's Signature National Board, State; Province, and Endorsements Date_ _ __._i.)~'~'£;~*-~,i_z,_ _ _ _19 27

                                                                                                                                              ----

Attachment 2 Page 78 of 78 Serial No.: 97-709 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 . Owner Virginia Electric and Power Co. Date _1_2_/_1_5_/_9_7_ _ _--,--_ _ _ _ _ __ Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _l _ _ of _ _l_ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Unit _T_w_o_________________

2. P l a n t - - - - - - - - - - - : - : - - - - - - - - - - - -

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00365796-0l, RR#97-222 Addre11 Repair Organization P.O. No., Job No., etc. Type Code Symbol Stamp _ _ _NA Virginia Power

3. Work Performed by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ __,,.,.___ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _....cM.:.::a.:.::i;.:.;n;....;;;.s.::.te.::.a"'m"---------------------------------

5. (a) Applicable Construction Coda 831

1 19_55__ Edition,_N_A_-_ _ _ _ _ Addenda, N-l through N-lcode Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19-Bo.;9z..__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes -,

Component Manufacturer Serial No. No. Identification Built or Replacement or No)

         ,<;t-.ucl~       M-,,,-.1--

T-- '" '" o_M~-~n_o~,n **- - ., ~~

                                                                                                                          *--~       "~

Nuts Mackson, Inc. NA NA 2-MS-SV-201B NA Replacement No

7. Description of Work Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (studs), BNT-467064 (nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ____N_A _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _N_A ___________ Signed /7. ~ /

            ~ v i n i i r o ~ n e e , Title L/   .::Z:-<;':Z-CERTIFICATE OF INSERVICE INSPECTION I, the undersigne~, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State
            .

or Province of virginia and employed by HSBI and I Co. of Hartford, Ct.

ha~~hspeA~ the components described in this Owner's Report during the period ______/.._.,c"'/.--'.&:::.:..1,../;-'~""'/._*_ _ to /(;) c.. (, 17 , and state that r to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this I Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. /J?ft'

___4?.-=---"'~'J=. __._,=-~-,..;;'----'*==-----Commissions _ _ _ _ _v_a_._~_*~_'(_,z.._'!._~_~_"_/--'.£.,,,_..,.u;~F/!CL.-_

c.c..:..*__.@c.,*****,c..*. Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _~A~r~&~e~t_'v ___19 7/}}

ML18151A286

Text

Navigation menu

Search