Text

Inservice Inspections Abstract of Exams.
	ML18151A311
Person / Time
Site:	Surry
Issue date:	07/21/1997
From:	; VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.)
To:	;
Shared Package
ML18151A312	List: ML18151A311; ML18153A427;
References
	NUDOCS 9707290050
	Download: ML18151A311 (160)
	v • d • e

-** *----**--

Attachment 1 Surry Power Station Unit 1 Inservice Inspections Abstract of Examinations

9707290050 970721

PDR ADOCK 05000280 -

.. G PDR l

Attachment 1 Page 1 of 33 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules Virginia Electric and Power Company, 5000 Dominion Blvd., Glen Allen, VA 23060

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

(Name and Address of Owner) 2 . Plant __s_u_r_ry_P_o_w_e_r_s_t_a_t_i_o_n_,_5_5_7_0_H_o_g_I_s_la_n_d_R_d_.,_s_u_r_ry_,_v_A_2_3_8_8_3_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

(Name and Address of Plant)

NA

3. Plant Unit _ _ _ _ _ _ _ _ _ _ 4. Owner Certificate of Authorization (if required) _ _ _ _ _ _ _ __

5. Commercial Service Date 12/22/72 6. National Board Number for Unit - - = N A ~ - - - - - - - - - -

7. Components Inspected Manufacturer Component or Manufacturer or Installer State or National Appurtenance or Installer Serial No. Province No. Board No.

Reactor Vessel Rotterdam 137-1 VA 58201 NA Steam Generator Westinghouse Tampa Division 2981 VA 58203 681 1-RC-E-1A Steam Generator Westinghouse Tampa Division 2982 VA 58204 682 1-RC-E-1B Reactor Coolant Westinghouse 458 NA NA Pump 1-RC-P-1A Seal Injection Commercial Filters Corporation NA NA NA Filter 1-CH-FL-4B Pressurizer Westinghouse NA VA 58202 1031 1-RC-E-2 Excess LD HEX Atlas Industrial Manutacturrng 1-CH-E-4 Company 851 VA 58206 702 RHR Heat Ex Atlas Industrial Manufacturing 1-RH-E-1A Company 890 VA 58212 740 RHR Heat Ex Atlas Industrial Manufacturing 1-RH-E-1B Comoanv 891 VA 58211 741 Class 1/2 Piping Southwest Fabricating Comany NA NA NA Class 1/2 Component Supports Southwest Fabricating Company NA NA NA Note: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,

(2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/88) This form (E00029) rnay be obtained from the brder Dept., ASME, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300.

FORM NIS-1 (Back)

8. Examination Dates ___9.o,./_2_6/'-9_5_ _ _ _ _ _ to ___ 4/'-2_6..:./_9_7_ _ _ _ __

First Period (10-14 10-14-96), Second Period (10-14 10-14-00)

9. Inspection Period Identification - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - - -

Third Interval (10-14 10-14-03)

10. Inspection Interval Identification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

11. Applicable Edition of Section XI ___1_9_8_9_ _ _ _ _ _ _ Addenda _ _;_:N..:.o'-'-ne~-------

February 5, 1997, Revision 7

12. Date/Revision of Inspection Plan - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan.

See Attachment 1, Pages through 12 of abstract of examinations performed See Attachment 1, Pages through 4 of abstract of system pressure tests

14. Abstract of Results of Examinations and Tests.

See Attachment 1, (examination surrrnary, Pages 1-3)

15. Abstract of Corrective Measures.

See Attachment 1, (examination summary, Pages 2 and 3)

We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable) _ _ _N_A_ _ _ _ _ _ _ _ Expiration Date _ _N_A_ _ _ _ _ _ _ _ __

Signed _ ___,V...,iccr_,,g_._in'-'-1.. ,a,.__,,E'

-'-l.,,_ec~t,,_,.,.._,,&'-'--Po=w=e..,_r__,,C_,.o~.- - - By Owner Cw ~~Jo,.,

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Vi rgi ni a and employed by Hartford s

8

I. & I. Co* of Hartford, CT

- - - - - - - - - - - - - - - have inspected the components described in this Owner's Report during the period

09"/""2.u6-1-'9""5.,______ to 4(26(97 , and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

ao' M4a.A Inspectbs / ~ b

~

L/

Commissions __N_B_7_9_33_,__V_A_B_B_3_ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date 19 I

Attachment 1 Page 2 of 33 Serial No.: 97-311 Docket No.: 50-280 Examination Summary

Virginia Electric and Power Company Surry Power Station Unit 1 1997 Refueling Outage 3rd Interval 8 1st and 2nd Periods Introduction This report covers inservice examinations and tests of Class 1 and Class 2 components, piping and component supports that were conducted at Surry Power Station Unit 1 from September 26, 1995 through April 26, 1997. The examinations were conducted to meet the requirements of ASME Section XI, 1989 Edition, of the ASME Boiler and Pressure Vessel Code.

Examination procedures were approved prior to the performance of the examinations. Certification documents relative to personnel, equipment and materials were reviewed and determined to be satisfactory.

Inspections, witnessing and surveillance of the examinations and related activities were conducted by personnel from the Hartford Steam Boiler Inspection and Insurance Company, One State Street, Hartford, Connecticut 06102 (Mr. R.A. Smith), and Surry technical staff.

Limitations Some of the arrangements and details of the piping systems and components were designed and fabricated before the access and examination requirements of ASME Section XI of the 1989 Code could be applied. Consequently, some examinations are limited or not practical due to geometric configuration or accessibility.

Generally these limitations exist at fitting to fitting joints, such as elbow to tee, elbow to valve, reducer to valve, and where integrally welded attachments, lugs and supports preclude access to some part of the examination area. These limitations some-times preclude ultrasonic coupling or access for the required scan length or surface examination .

Page 1 of 4

Attachment 1 Page 3 of 33 Serial No.: 97-311 Docket No.: 50-280 Examinations Examinations were conducted to review as much of the examination zones as was practical within geometric, metallurgical and physical limitations. When the required ultrasonic examination volume or area could not be examined 100%, the examination method was evaluated and alternate beam angles or methods were consid~

ered in an attempt to achieve the maximum examination volume. In the case of surface examinations where full coverage could not be achieved, an alternate component was considered for examination.

However, where 100% examination was not possible the examination was considered to be a partial and so noted on the examination report. Where the reduction in coverage was 10% or greater, per Code Case N-460, a subsequent relief request will be provided by separate correspondence.

Results Examinations of components, piping and component supports result-ed in a total.of three (3) items being reported on the basis of procedure reporting criteria. All other examinations and tests are acceptable.

A summary of the indications and their dispositions are as follows:

1. Support 1-RH-H019, (Class 2) shown on drawing 11448-WMKS-0117Al-1, on line 14"-RH-2-602 was reported as having a missing I.D. plate and scale, and therefore, a determination of the cold spring setting could not be made. A follow up examination by Design Engineering determined that a load scale was attached, but the support load was outside the allowable tolerance. The load was adjusted to within toler-ance, reinspected and accepted. The support is scheduled for re-examination in the next period per ASME Section XI, IWF-2420. Per ASME Section XI, IWF-2430, an immediately adjacent support was examined, (there was only one immedi-ately adjacent support, i.e., the line terminated on one side of the rejected support with no additional supports on that line) and the examinations were extended to include additional supports equal in number and similar in type, design and function to those initially examined during the inspection period. No corrective measures were required to be performed on the additional supports that were scheduled due to expansion of the examinations.

2. Weld 7-0lBC, (Class 2) shown on drawing 11448-WMKS-0122Kl on line 2"-SI-81-1502 was examined by liquid penetrant exami-nation, and a linear indication 0.5" long was reported. The indication was noted as being located in a start/stop area

Page 2 of 4

Attachment 1 Page 4 of 33 Serial No.: 97-311 Docket No.: 50-280 of the weld. The linear indication was ground out, and the excavation was examined with the liquid penetrant method to verify removal of the linear indication. The area was repaired by welding. A preservice examination was performed using the liquid penetrant method, the examination reported no relevant indications. Per ASME Section XI, IWC-2430, the examinations were extended to include an additional number of welds (25 welds) within the same examination category, equal to the number of welds examined initially during the inspection period. No indications were found on the welds that were scheduled due to expansion of the examinations.

3. Weld 2-06, (Class 2) on steam generator "B" shown on drawing 11448-WMKS-RC-E-lB.1 was examined by ultrasonic examination and these indications 60-3, 60-4 and 45-18 were detected.

All three indications were initially detected during an ISI examination conducted in 1986 and have been monitored during successive periods. The requirements of the ASME Section Xl Code now in effect at Surry (1989 Edition) have been changed to require the use of a 20% dB drop technique. The indica-tions were previously sized with a 50% dB drop technique in accordance with the requirements of the Section Xl Code Editions which were previously in effect at Surry. Since the 20% dB drop technique will result in a larger size for the indications, they were also sized with a 50% dB drop technique in order to facilitate comparison with previous

examination results. The current examination results for these indications revealed no significant changes in the size of these indications. In addition, Westinghouse was tasked to reevaluate the indications to ensure that they meet the current Code requirements when sized with the 20%

dB drop technique. The Westinghouse evaluation, using the same analytical techniques used in 1986, determined the indications as measured by the 20% dB drop technique to be acceptable. The Westinghouse evaluation is provided as Attachment 3 of this report.

Analytical Evaluation Analytical evaluation(s) of examination results (Volumetric and/or Surface examinations):

To confirm the continued acceptance of the indications 60-3, 60-4 and 45-18 after sizing with a 20% dB drop technique, Westinghouse performed an evaluation using the same analytical techniques used previously, 1986, when the flaws were sized using 50% dB drop technique acceptance criteria. (See item 3 under results.) The indications remain acceptable .

Page 3 of 4

Attachment 1 Page 5 of 33 Serial No.: 97-311 Docket No.: 50-280 Evaluation Analyses

Evaluation analyses of examination results (Visual Examinations)

None required or performed.

Statement of Interval Status Virginia Electric and Power Company has completed 49 percent of the Second Period examinations and 48 percent of the interval examinations .

Page 4 of 4 I_ _J

Attachment 1 Page 6 of 33 Serial No.: 97-311 Docket No.: 50-280 Abstract of Examinations Performed IWB, IWC & IWF 11448-WMKS-0100A1Z Mark No.

1-01 Line No.

W, 11 -CH-97-1502 Sect XI Class 1A Sect XI Category B-J Sect XI Item No.

B9.40 Exam.

Method PT Exam.

Date 03/26/97 Remarks 11448-WMKS-0100A4Z 1-RC-HCV-1557A 2"-RC-55-1502 1A B-G-2 B7.70 VT-1 03/16/97 A 11448-WMKS-0100A7Z 1-33 2"-CH-8-1503 1A B-J B9.40 PT 03/25/97 11448-WMKS-0100D1 1-SHP-HSS-004 30"-SHP-1-601 2A TS3.2 TS4.17 VT-3 03/12/97 11448-WMKS-0100G1 1-WFPD-HSS-002 14"-WFPD-17-601 2A TS3.2 TS4.17 VT-3 03/12/97 11448-WMKS-0101A1Z FLANGE A W, 11 -CH-95-1502 1A B-G-2 B7.50 VT-1 03/16/97 11448-WMKS-0101D1 H004-1 30 11 -SHP-2-601 2A c-c C3.20 MT 03/30/97 11448-WMKS-0101D1 H004-2 30 11 -SHP-2-601 2A c-c C3.20 MT 03/30/97 11448-WMKS-0101G1 1-WFPD-HSS-015 14 11 -WFPD-13-601 2A TS3.2 TS4.17 VT-3 03/12/97 11448-WMKS-0101G1 H003-1 14"-WFPD-13-601 2A c-c C3.20 MT 03/30/97 11448-WMKS-0101G1 H003-2 14 11 -WFPD-13-601 2A c-c C3.20 MT 03/30/97 11448-WMKS-0102A1Z 1-09 2"-CH-93-1502 1A B-J B9.40 PT 03/15/97 11448-WMKS-0102A1Z 1-13 2"-CH-93-1502 1A B-J B9.40 PT 03/15/97 MKS-0102A1Z 1-17 211 -CH-93-1502 1A B-J B9.40 PT 03/27/97 MKS-0102A1Z FLANGE A ,V, 11 -CH-93-1502 1A B-G-2 B7.50 VT-1 03/16/97 11448-WMKS-0102A2Z 1-03 2"-RC-58-1502 1A B-J B9.40 PT 03/22/97 11448-WMKS-0102A2Z 1-06 2"-RC-58-1502 1A B-J B9.40 PT 03/22/97 11448-WMKS-0102A2Z 1-09 2"-RC-58-1502 1A B-J B9.40 PT 03/19/97 11448-WMKS-0102A2Z 1-16 2"-RC-58-1502 1A B-J B9.40 PT 03/27/97 11448-WMKS-0102A2Z 1-18BC 2"-RC-59-1502 1A B-J B9.32 PT 03/12/97 11448-WMKS-0102A2Z 1-22 2"-RC-59-1502 1A B-J B9.40 PT 03/12/97 11448-WMKS-0102A2Z 1-25 211 -RC-59-1502 1A B-J B9.40 PT 03/12/97 11448-WMKS-0102A2Z 1-30 2"-RC-59-1502 1A B-J B9.40 PT 03/12/97 11448-WMKS-0102A2Z 1-RC-H001 211 -RC-58-1502 1A F-A F1.10 VT-3 03/16/97 A 11448-WMKS-0102A2Z 1-RC-HCV-1557C 2"-RC-59-1502 1A B-G-2 B7.70 VT-1 03/11/97 A 11448-WMKS-0102A3Z 1-01BC 2"-RC-200-1502 1A B-J B9.32 PT 03/12/97 11448-WMKS-0102A3Z 1-CH-H001 2"-CH-10-1503 1A F-A F1.40 VT-3 03/16/97 11448-WMKS-0102A3Z 1-CH-HCV-1556C 2"-CH-10-1503 1A B-G-2 B7.70 VT-1 03/11/97 11448-WMKS-0102D1 1-SHP-H001B 30"-SHP-3-601 2A F-A F1.20 VT-3 04/01/97 11448-WMKS-0102D1 H001-1 30 11 -SHP-3-601 2A c-c C3.20 MT 04/01/97

-WMKS-0102D1 H001-2 30 11 -SHP-3-601 2A c-c C3.20 MT 04/01/97 Page 1 of 6

Attachment 1 Page 7 of 33 Serial No.: 97-311 Docket No.: 50-280 Abstract of Examinations Performed IWB, IWC & IWF 11448-WMKS-0102G1 11448-WMKS-0103A2-2 Mark No.

1-WFPD-HSS-014 0-1L Line No.

14"-WFPD-9-601 30"-SHP-23-601 Sect XI Class 2A 2A Sect XI Category TS3.2 C-F-2 Sect XI Item No.

TS4.17 CS.52 Exam_

Method VT-3 UT/MT Exam.

Date 03/12/97 03/15/97 Remarks 11448-WMKS-0103A2-2 0-4L 30"-SHP-2-601 2A C-F-2 CS.52 UT/MT 03/15/97 11448-WMKS-0103A2-2 1-07A 611 -SHP-46-601 2A C-F-2 CS.51 UT/MT 03/13/97 11448-WMKS-0103A2-2 4-10 30"-SHP-2-601 2A C-F-2 CS.51 UT/MT 03/15/97 11448-WMKS-0103A2-2 4-11BC 30"-SHP-23-601 2A C-F-2 cs .81 UT/MT 03/15/97 11448-WMKS-0103A2-2 4-25 30"-SHP-2-601 2A C-F-2 CS.51 UT/MT 03/15/97 11448-WMKS-0103A2-3 1-04 611 -SHP-47-601 2A C-F-2 CS.51 UT/MT 03/16/97 11448-WMKS-0117A1-1 1-RH-HOOSA 14"-RH-18-602 2A F-A F1.20 VT-3 04/10/97 E2 11448-WMKS-0117A1-1 1-RH-H019 14"-RH-2-602 2A F-A F1.20 VT-3 03/26/97 F2 11448-WMKS-0117A1-1 1-RH-HSS-026 14"-RH-2-602 2A TS3.2 TS4.17 VT-3 04/10/97 E2 11448-WMKS-0117A1-1 1-RH-MOV-1700 14"-RH-1-1502 1A B-G-2 B7.70 VT-1 03/28/97 11448-WMKS-0118A2-1 1-WAPD-H024A 611 -WAPD-50-601 2A F-A F1.20 VT-3 03/26/97 11448-WMKS-0122A1 1-RH-H008 10"-RH-16-1502 1A F-A F1. 10 VT-3 03/11/97 MKS-0122A2 1-03 12"-RC-24-1502 1A B-J B9.11 UT/PT 03/18/97

-WMKS-0122A2 1-RH-HSS-023 10"-RH-17-1502 1A TS3.2 TS4. 17 VT-3 03/11/97 11448-WMKS-0122D1 1-SI-HSS-023 12 11 -SI 1502 1A TS3.2 TS4 .17 VT-3 03/11/97 11448-WMKS-0122H1 1-SI-239 611 -RC-16-1502 1A B-G-2 B7.70 VT-1 03/21/97 A 11448-WMKS-0122J1 0-01 2"-SI-79-1502 2A C-F-1 CS.30 PT 03/28/97 E1 11448-WMKS-0122J1 0-02 2"-Sl-79-1502 2A C-F-1 CS.30 PT 03/28/97 E1 11448-WMKS-0122J1 1-08 611 -RC-21-1502 1A B-J B9.11 UT/PT 03/21/97 11448-WMKS-0122K1 1-22 611 -SI-50-1502 2A C-F-1 CS.11 UT/PT 03/30/97 11448-WMKS-0122K1 3-16 611 -SI-48-1502 2A C-F-1 CS.11 UT/PT 03/24/97 11448-WMKS-0122K1 7-01BC 2"-SI-81-1502 2A C-F-1 CS.41 PT 03/28/97 F1 11448-WMKS-0122K1 7-02 2"-SI-81-1502 2A C-F-1 CS.30 PT 03/29/97 E1 11448-WMKS-0122K1AZ 1-11 2"-Sl-80-1502 2A C-F-1 CS.30 PT 03/29/97 E1 11448-WMKS-0122K1BZ 1-05 211 -SI-81-1502 2A C-F-1 CS.30 PT 03/29/97 E1 11448-WMKS-0122K1BZ 1-06 2"-S!-81-1502 2A C-F-1 CS.30 PT 03/29/97 E1 11448-WMKS-0122K1BZ 1-12 2"-Sl-81-1502 2A C-F-1 CS.30 PT 03/29/97 11448-WMKS-0122L1 1-S!-109 12"-SI-45-1502 1A B-G-2 B7.70 VT-1 03/21/97 11448-WMKS-0123Q1 0-05 12 11 -CS-2-153 2A C-F-1 CS.11 UT/PT 03/16/97 MKS-0124A1-1 1-08 611 -RC-39-1502 1A B-J B9.11 UT/PT 03/25/97 Page 2 of 6

Attachment 1 Page 8 of 33 Serial No.: 97-311 Docket No.: 50-280 Abstract of Examinations Performed IWB, IWC & IWF Marie Line Sect XI Sect XI Sect XI Exam_ Exam_

No_ No- Class Category Item No_ Method Date Remarks 11448-WMKS-0124A1-1 2-01DM 6 11 -RC-38-1502 1A B-F B5.40 UT/PT 03/26/97 11448-WMKS-0124A1-1 2-02 6 -RC-38-1502 11 1A B-J B9.11 UT/PT 03/26/97 11448-WMKS-0124A1-1 2-08 611 -RC-38-1502 1A B-J B9.11 UT/PT 03/26/97 11448-WMKS-0124A1-1 3-01DM 4"-RC-34-1502 1A B-F B5.40 UT/PT 03/18/97 11448-WMKS-0124A1-1 3-02 4"-RC-34-1502 1A B-J B9.11 UT/PT 03/18/97 11448-WMKS-0124A1-1 3-07BC 3"-RC-35-1502 1A B-J B9.32 PT 03/18/97 11448-WMKS-0124A1-1 3-10 3 11 -RC-35-1502 1A B-J B9.21 PT 03/18/97 11448-WMKS-0124A1-1 3-16 3"-RC-61-1502 1A B-J B9.21 PT 03/18/97 11448-WMKS-0124A1-1 4-01DM 6"-RC-37-1502 1A B-F B5.40 UT/PT 03/26/97 11448-WMKS-0124A1-1 4-02 611 -RC-37-1502 1A B-J B9.11 UT/PT 03/26/97 11448-WMKS-0124A1-1 4-08 611 -RC-37-1502 1A B-J B9.11 UT/PT 03/25/97 11448-WMKS-0125A1-1 1-11 4"-RC-14-1502 1A B-J B9.11 UT/PT 03/28/97 11448-WMKS-0125A1-2 1-RC-H002A 4"-RC-15-1502 1A F-A F1. 10 VT-3 03/26/97 A 11448-WMKS-0125A1-2 1-RC-H002B 4"-RC-15-1502 1A F-A F1.10 VT-3 03/26/97 A MKS-0125A1-2 1-RC-H006 4"-RC-15-1502 1A F-A F1.10 VT-3 03/16/97 A 11 -WMKS-0125A1-2 1-RC-HSS-104 4"-RC-15-1502 1A TS3.2 TS4.17 VT-3 03/11/97 11448-WMKS-0125A1-2 2-25DM 4"-RC-15-1502 1A B-F B5.40 UT/PT 03/26/97 11448-WMKS-0127C2 1-04 6 11 -SI-153-1502 2A C-F-1 C5.11 UT/PT 03/15/97 11448-WMKS-0127C2 1-07 10"-SI-152-1502 2A C-F-1 C5.11 UT/PT 03/17/97 11448-WMKS-0127C2 1-SI-H009 10"-SI-152-1502 2A F-A F1.20 VT-3 03/14/97 11448-WMKS-0127C2 1-SI-H014 611 -SI-48-1502 2A F-A F1.20 VT-3 03/14/97 11448-WMKS-0127C2 2-09 6"-SI-48-1502 2A C-F-1 C5.11 UT/PT 03/15/97 11448-WMKS-0127C2 3-AGF 10"-SI-148-153 2F C-F-1 C5.11 UT/PT 03/16/97 11448-WMKS-0127J1 1-SI-241 611 -SI-145-1502 1A B-G-2 B7.70 VT-1 03/10/97 A 11448-WMKS-0127J1 1-SI-79 6 -RC-17-1502 11 1A B-G-2 B7.70 VT-1 03/10/97 A 11448-WMKS-0127J2 1-SI-082 6"-RC-19-1502 1A B-G-2 B7.70 VT-1 03/11/97 A 11448-WMKS-0127J2 1-SI-242 6 -SI-144-1502 11 1A B-G-2 B7.70 VT-1 03/11/97 A 11448-WMKS-0127J3 1-03 6"-RC-20-1502 1A B-J B9.11 UT/PT 03/22/97 11448-WMKS-0127J3 1-SI-085 6 -RC-20-1502 11 1A B-G-2 B7.70 VT-1 03/11/97 A 11448-WMKS-0127J3 1-SI-243 6 11 -SI-153-1502 1A B-G-2 B7. 70 VT-1 03/11/97 A 11448-WMKS-0127J4 1-SI-H003 6"-SI-153-1502 2A F-A F1.20 VT-3 03/11/97 WMKS-0127J4 1-SI-H007 6"-SI-153-1502 2A F-A F1.20 VT-3 03/16/97 Page 3 of 6

Attachment 1 Page 9 of 33 Serial No.: 97-311 Docket No.: 50-280 Abstract of Examinations Performed IWB 6 IWC & IWF 11448-WMKS-0127J5 11448-WMKS-0127J5 Mark No.

1-SI-H005 1-SI-H006 Line No.

611 -SI-145-1502 611 -SI-145-1502 Sect XI Class 2A 2A Sect XI Category F-A F-A Sect XI Item No.

F1.20 F1.20 Exam.

Method VT-3 VT-3 Exam.

Date 03/11/97 03/11/97 Remarks 11448-WMKS-0127J5 3-35 611 -SI-153-1502 2A C-F-1 C5.11 UT/PT 03/24/97 11448-WMKS-1103A2 1-RC-MOV-1587 8"-RC-13-2501R 1A 8-M-2 812.50 VT-3 03/29/97 11448-WMKS-1103A2Z 1-018C 2"-RC-44-1502 1A 8-J 89.32 PT 03/19/97 11448-WMKS-1103A2Z 1-178C 2"-RC-44-1502 1A 8-J 89.32 PT 03/19/97 11448-WMKS-1103A2Z 1-RC-FE-1482 2"-RC-44-1502 1A 8-G-2 87.50 VT-1 03/11/97 A 11448-WMKS-1103A3Z 1-RC-FE-1481 2"-RC-46-1502 1A 8-G-2 87.50 VT-1 03/-11/97 A 11448-WMKS-110585 0-03 4"-CH-80-1503 2A C-F-1 C5.21 UT/PT 03/12/97 11448-WMKS-110585 1-06 3"-CH-69-1503 2A C-F-1 CS.21 UT/PT 03/08/97 11448-WMKS-110585 1-CH-H-005 311 -CH-113-1503 2A F-A F1.20 VT-3 03/07/97 11448-WMKS-110585 2-AJ 311 -CH-2-1503 2A C-F-1 CS.21 UT/PT 03/09/97 11448-WMKS-110585 2-8L 211 -CH-20-1503 2A C-F-1 C5.30 PT 03/13/97 11448-WMKS-110585 2-8Y 2"-CH-21-1503 2A C-F-1 C5.30 PT 03/07/97

~MKS-110585 2-T 311 -CH-2-1503 2A C-F-1 CS.21 UT/PT 03/07/97 MKS-110586 1-CH-H-002 4"-CH-80-1503 2A F-A F1.20 VT-3 03/07/97 11448-WMKS-110589 1-ANF 311 -CH-69-1503 2A C-F-1 C5.21 UT/PT 03/11/97 11448-WMKS-110589 1-8GS 211 -CH-8-1503 2A C-F-1 CS.21 UT/PT 03/11/97 11448-WMKS-1106A2 0-02 3 11 -SI-147-1503 2A C-F-1 C5.21 UT/PT 03/24/97 11448-WMKS-1106A3 0-12 211 -SI-72-1503 2A C-F-1 C5.30 PT 03/28/97 E1 11448-WMKS-1106A3 0-13 2 -SI-72-1503 11 2A C-F-1 CS.30 PT 03/28/97 E1 11448-WMKS-1106A3 0-14 211 -SI-72-1503 2A C-F-1 C5.30 PT 03/28/97 E1 11448-WMKS-1106A3 1-22 2 -SI-77-1503 11 2A C-F-1 C5.30 PT 03/28/97 E1 11448-WMKS-1106A3 1-23 211 -SI-77-1503 2A C- F-1 CS.30 PT 03/28/97 E1 11448-WMKS-1106A3 1-25 2"-SI-77-1503 2A C-F-1 CS.30 PT 03/28/97 E1 11448-WMKS-1106A3 2-21 2"-Sl-73-1503 2A C-F-1 CS.30 PT 03/28/97 E1 11448-WMKS-1106A3 2-22 2"-Sl-73-1503 2A C-F-1 cs .30 PT 03/28/97 E1 11448-WMKS-1106A3 2-23 2"-SI-73-1503 2A C-F-1 C5.30 PT 03/28/97 E1 11448-WMKS-1106A4 3-41 2"-SI-74-1502 2A C-F-1 CS.30 PT 03/29/97 E1 11448-WMKS-1106A4 4-25 2"-SI-75-1502 2A C-F-1 CS.30 PT 03/28/97 E1 11448-WMKS-1106A4 4-26 2"-SI-75-1502 2A C-F-1 CS.30 PT 03/28/97 E1

~MKS-1106A4 4-29 211 -SI-70-1503 2A C-F-1 C5.30 PT 03/28/97 E1 Page 4 of 6

Attachment 1 Page 10 of 33 Serial No.: 97-311 Docket No.: 50-280 Abstract of Examinations Performed IWB, IWC & IWF

11448-WMKS-1106A4 11448-WMKS*1106A4Z Mark No.

4-30 1-29 Line No.

2"-SI-70-1503 2"-SI-74-1502 Sect XI Class 2A 2A Sect XI Category C-F-1 C-F-1 Sect XI Item No.

C5.30 C5.30 Exam.

Method PT PT Exam.

Date 03/28/97 03/29/97 Remarks E1 E1 11448-WMKS-1106A4Z 1-30 2"-SI-74-1502 2A C-F-1 C5.30 PT 03/29/97 E1 11448-WMKS-1106A4Z 1-33 2"-SI-74-1502 2A C-F-1 C5.30 PT 03/29/97 E1 11448-WMKS-1106A4Z 1-39 2"-SI-74-1502 2A C-F-1 C5.30 PT 03/29/97 E1 11448-WMKS-1106A4Z 1-40 2"-Sl-74-1502 2A C-F-1 C5.30 PT 03/29/97 E1 11448-WMKS-1106B2 0-25 311 -SI-147-1503 2A C-F-1 C5.21 UT/PT 03/08/97 11448-WMKS-1106B3 0-23 3 -SI -147-1503 11 2A C-F-1 C5.21 UT/PT 03/08/97 11448-WMKS-1106B4 0-07 3"-SI-57-1503 2A C-F-1 C5.21 UT/PT 03/13/97 11448-WMKS-1106B4 1-SI-H-001 3"-SI-57-1503 2A F-A F1.20 VT-3 03/07/97 11448-WMKS-1106B5 1-SI-H-003 3 11 -SI-72-1503 2A F-A F1.20 VT-3 03/07/97 11448-WMKS-1106B6 0-25 311 -SI-70-1503 2A C-F-1 C5.21 UT/PT 03/08/97 11448-WMKS-1106B6 0-30 3"-Sl-70-1503 2A C-F-1 C5.21 UT/PT 03/08/97 11448-WMKS-1106B6 1-SI-H-004 311 -SI-90-1503 2A F-A F1.20 VT-3 03/07/97

~KS-CH-E-4 1-01 1-CH-E-4 2A C-A C1.20 UT 03/24/97 911 -18 11 MKS-CH-E-4 1-02 1-CH-E-4 2A C-A C1.10 UT 03/24/97 911 -18 11 11448-WMKS-CH-FL-4A 1-CH-H001 1-CH-FL-4A 2A F-A F1 .40 VT-3 02/14/97 11448-WMKS-CH-FL-4A 1-CH-H002 1-CH-FL-4A 2A F-A F1.40 VT-3 02/14/97 11448-WMKS-CH-FL-4A 1-CH-H003 1-CH-FL-4A 2A F-A F1 .40 VT-3 02/14/97 11448-WMKS-CH-FL-4B 1-01 1-CH-FL-4B 2A C-A C1.20 UT 02/14/97 11 11 -22 11 11448-WMKS-CH-FL-4B 1-02 1-CH-FL-4B 2A C-A C1.10 UT 02/14/97 11 11 -22 11 11448-WMKS-RC-E-1B.1 2-02 1-RC-E-1B 2A C-A C1.30 UT 03/13/97 142 11 -284 11 11448-WMKS-RC-E-1B.1 2-03 1-RC-E-1B 2A C-A C1. 10 UT 03/22/97 142 11 -284 11 11448-WMKS-RC-E-1B.1 2-05 1-RC-E-1B 2A C-A C1. 10 UT 03/15/97 142 11 -284 11 11448-WMKS-RC-E-1B.1 206 1-RC-E-1B 2A C-A C1.10 UT 03/24/97 184 11 -368 11 11448-WMKS-RC-E-1B.1 2-08 1-RC-E-1B 2A C-A C1.20 UT 03/23/97 184 11 -368 11 11448-WMKS-RC-E-1B.2 1-RC-2-02DNIR 1-RC-E-1B 2A C-B C2.22 UT 03/17/97 16 11 -33 11 11448-WMKS-RC-E-1B.2 2-09 1-RC-E-1B 2A C-B C2.21 UT/MT 03/20/97 16 11 -33 11 11448-WMKS-RC-E-1B.2 2-10 1-RC-E-1B 2A C-B C2.21 UT/MT 03/23/97 33 11 -6711 11448-WMKS-RC-E-2 1-08 1-RC-E-2 1A B-B B2.11 UT 03/15/97 145 11 -290 11 11448-WMKS-RC-E-2 1-16 1-RC-E-2 1A B-K-1 B10.10 UT 03/18/97 9711 -194 11

~WMKS-RC-E-2 1-RC-20NIR 1-RC-E-2 1A B-D B3.120 UT 03/26/97 Page 5 of 6

Attachment 1 Page 11 of 33 Serial No.: 97-311 Docket No.: 50-28D Abstract of Examinations Performed IWB 6 IWC & IWF Mark Line Sect XI Sect XI Sect XI Exam. Exam.

No. No. Class Category Item No. Method Date Remarks 11448-WMKS-RC-E-2 1-RC-21NIR 1-RC-E-2 1A B-D B3.120 UT 03/26/97 11448-WMKS-RC-E-2 H001-2 1-RC-E-2 1A B-K-1 B10.10 MT 03/20/97 11448-WMKS*RC-E-2 Heater Elements 1-RC-E-2 1A B-E B4.20 VT-2 04/27/97 11448-WMKS-RC-E-2 Lower Sample Noz 1-RC-E-2 1A B-E B4.11 VT-2 04/27/97 11448-WMKS*RC-E-2 MANWAY 1-RC-E-2 1A B-G-2 B7.20 VT-1 03/11/97 11448-WMKS-RC-MOV1595 NUTS 1-13 2?1/,11 -RC-9-2501R 1A B-G-1 B6.230 VT-1 03/17/97 11448-WMKS-RC-MOV1595 STUDS 1-13 2?1/,"*RC-9-2501 R 1A B-G-1 B6.210 UT 03/22/97 11448-WMKS-RC-P-1A.1 1-RC-FRAME 1-RC-P-1A 1A F-A F1.40 VT-3 03/16/97 11448-WMKS-RC-P-1A.1 1-RC-P-1A 1-RC-P-1A 1A B-L-2 B12.20 VT-3 03/24/97 11448-WMKS-RC-P-1A.2 B09 1-RC-P-1A 1A B-G-1 B6.180 UT 03/20/97 11448-WMKS-RC-P-1A.2 B10 1-RC-P-1A 1A B-G-1 B6.180 UT 03/20/97 11448-WMKS-RC-P-1A.2 B11 1-RC-P-1A 1A B-G-1 B6.180 UT 03/20/97 11448-WMKS-RC-P-1A.2 B12 1-RC-P-1A 1A B-G-1 B6. 180 UT 03/20/97 11448-WMKS-RC-P-1A.2 B13 1-RC-P-1A 1A B-G-1 B6. 180 UT 03/20/97 MKS-RC-P-1A.2 B14 1-RC-P-1A 1A B-G-1 B6.180 UT 03/20/97

-WMKS-RC-P-1A.2 B15 1-RC-P-1A 1A B-G-1 B6.180 UT 03/20/97 11448-WMKS-RC-P-1A.2 B16 1-RC-P-1A 1A B-G-1 B6.180 UT 03/20/97 11448-WMKS-RC-P-1A.2 FLANGE 1-RC-P-1A 1A B-G-1 B6. 190 VT-1 03/23/97 11448-WMKS-RC-R-1.2 1-01 1-RC-R-1 1A B-A B1.40 UT/MT 03/25/97 179 11 -358 11 11448-WMKS-RC-R-1.2 CRD-58 1-RC-R-1 1A B-0 B14.10 PT 03/29/97 11448-WMKS-RH-E-1A H002-1 1-RH-E-1A 2A c-c C3.10 PT 09/26/95 11448-WMKS*RH-E-1B H001-1 1-RH-E-1B 2A c-c C3.10 PT 09/28/95 Remarks Code:

A: Reexamination of a component that required corrective measures during a previous examination.

E1: Extended examinations performed due to indication on weld 7-01BC, on drawing 11448-WMKS-0122K1.

E2: Extended examinations performed due to failure of support 1-RH-H019, on drawing 11448-WMKS-0117A1-1.

F1: Weld 7-01BC, on drawing 11448-WMKS-0122K1 exhibited an indication which exceeded the Code acceptance criteria. The indication was removed and the excavation was examined by the method that found the original indication (liquid penetrant) to verify removal. The area was repaired by welding, and a preservice examination was performed. The examination for this category of weld was then extended to include a number equal to the number of welds selected for examination during the refueling outage.

F2: Support 1-RH-H019, on drawing 11448-WMKS-0117A1-1 was determined to have its support setting out of allowable tolerance. The load was adjusted to within tolerance, reinspected and accepted. The examination was then extended to include adjacent supports and a number equal in number and similar in type, design and function to those initially examined during the inspection period .

Page 6 of 6

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPB-006A-1-1 CONTAINMENT PURGE AIR SUPPLY PIPING 2 C-H C7.30 03/24/97 1-SPB-006A-1-1 CONTAINMENT PURGE AIR SUPPLY PIPING 2 C-H C7.70 03/24/97 1-SPM-064A-1-3 A S/G MAIN STEAM INSIDE CTMT 2 C-H C7 .10 04/27/97 1-SPM-064A-1-3 A S/G MAIN STEAM INSIDE CTMT 2 C-H C7.30 04/27/97 1-SPM-064A-1-3 A S/G MAIN STEAM INSIDE CTMT 2 C-H C7.70 04/27/97 1-SPM-064A-2-3 B S/G MAIN STEAM INSIDE CTMT 2 C-H C7.10 04/27/97 1-SPM-064A-2-3 B S/G MAIN STEAM INSIDE CTMT 2 C-H C7.30 04/27/97 1-SPM-064A-2-3 B S/G MAIN STEAM INSIDE CTMT 2 C-H C7.70 04/27/97 1-SPM-064A-3-3 C S/G MAIN STEAM INSIDE CTMT 2 C-H C7.10 04/27/97 1-SPM-064A-3-3 C S/G MAIN STEAM INSIDE CTMT 2 C-H C7.30 04/27/97 1-SPM-064A-3-3 C S/G MAIN STEAM INSIDE CTMT 2 C-H c7.70 04/27/97 1-SPM-066A-2-1 AIR EJECTOR DIVERT 2 C-H c7.30 03/12/97 1-SPM-066A-2-1 AIR EJECTOR DIVERT 2 C-H C7.70 03/12/97 1-SPM-068A-1-1 MAIN FEEDWATER TO 11 A11 S/G 2 C-H C7.30 04/27/97 1-SPM-068A-1-1 MAIN FEEDWATER TO 11 A11 S/G 2 C-H C7.70 04/27/97 1-SPM-068A-1-2 MAIN FEEDWATER TO 11 811 S/G 2 C-H c7.30 04/27/97 1-SPM-068A-1-2 MAIN FEEDWATER TO 11 811 S/G 2 C-H C7.70 04/27/97 1-SPM-068A-1-3 MAIN FEEDWATER TO "C" S/G 2 C-H C7.30 04/27/97 1-SPM-068A-1-3 MAIN FEEDWATER TO 11 C S/G 11 2 C-H c7.70 04/27/97 1-SPM-075C-1-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.30 03/11/97 0 CJ) oromrt

"'U )>

n,<ert A_,, C'1) llJ CD o, rt,--~~

n N3 zz CD Page 1 of 18 0 0 0 :J

-h n-w~

1.11 ,0 l,J

~--;,J NlN

())~

o~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-075C-1-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.70 03/11/97 1-SPM-075C-1-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.30 03/11/97 1-SPM-075C-1-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.70 03/11/97 1-SPM-079D-1-1 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H C?.30 09/30/96 1-SPM-079D-1-1 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H Cl. 70 09/30/96 1-SPM-079D-1-2 BORIC ACID TRANSFER PUMP 1-CH-P-28. 2 C-H C7.30 09/30/96 1-SPM-079D-1-2 BORIC ACID TRANSFER PUMP 1-CH-P-28. 2 C-H c?.70 09/30/96 1-SPM-082A-1-1 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H c?.30 10/04/96 1-SPM-082A-1-1 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.70 10/04/96 1-SPM-082A-1-2 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C?.30 09/23/96 1-SPM-082A-1-2 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H c?.70 09/23/96 1-SPM-082A-1-3 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.30 10/04/96 1-SPM-082A-1-3 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H c?.70 10/04/96 1-SPM-082A-1-5 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H c?.30 10/04/96 1-SPM-082A-1-5 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H Cl.70 10/04/96 1-SPM-0828-2-1 REACTOR COOLANT SYSTEM B-P 815.50 04/27/97 1-SPM-0828-2-1 REACTOR COOLANT SYSTEM B-P 815. 70 04/27/97 1-SPM-0828-2-2 REACTOR COOLANT SYSTEM B-P 815.50 04/27/97 1-SPM-0828-2-2 REACTOR COOLANT SYSTEM B-P 815.70 04/27/97 1-SPM-0828-2-3 REACTOR COOLANT SYSTEM B-P 815.50 04/27/97 OUl-U)>

o m m rt 1-SPM-0828-2-3 REACTOR COOLANT SYSTEM B-P 815.70 04/27/97 o,tart A....,, CD Cl>

(1) DJ n rtr--.Jt.~

vJ3

z :z (1)

Page 2 of 18 0 0 0 ::,

-+, rt vJ~

V1 ,0 vJ

~~

NvJ o,~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-082B-2-4 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-082B-2-4 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-082B-2-5 RESIDUAL HEAT REMOVAL/SAMPLE 2 C-H c7.30 03/22/97 1-SPM-082B-2-5 RESIDUAL HEAT REMOVAL/SAMPLE 2 C-H C7.70 03/22/97 1-SPM-082B-2-6 PRESSURIZER RELIEF TANK SAMPLE 2 C-H C7.30 03/17/97 1-SPM-082B-2-6 PRESSURIZER RELIEF TANK SAMPLE 2 C-H c7.70 03/17/97 1-SPM-083A-1-1 PRIMARY DRAIN TANK VENT HEADER. 2 C-H C7.30 03/28/97 1-SPM-083A-1-1 PRIMARY DRAIN TANK VENT HEADER. 2 C-H c7.70 03/28/97 1-SPM-083A-2-1 POST ACCIDENT SAMPLE RETURN 2 C-H C7.30 03/18/97 1-SPM-083A-2-1 POST ACCIDENT SAMPLE RETURN 2 C-H C7.70 03/18/97 1-SPM-083A-2-2 CONTAINMENT SUMP PUMP DISCHARGE. 2 C-H C7.30 03/23/97 1-SPM-083A-2-2 CONTAINMENT SUMP PUMP DISCHARGE. 2 C-H C7.70 03/23/97 1-SPM-083B-1-1 PRIMARY DRAIN TANK VENT HEADER. 2 C-H C7.30 03/28/97 1-SPM-083B-1-1 PRIMARY DRAIN TANK VENT HEADER. 2 C-H C7.70 03/28/97 1-SPM-083B-3-2 CONTAINMENT SUMP PUMP DISCHARGE. 2 C-H c7.30 03/23/97 1-SPM-083B-3-2 CONTAINMENT SUMP PUMP DISCHARGE. 2 C-H C7.70 03/23/97 1-SPM-083B-3-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-084A-1-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.10 08/22/96 PIPING 1-SPM-084A-1-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.30 08/22/96 PIPING 0 (/) -0 ;i:,,

OCDDlrt o-,lQrt

,;- - * (I) DJ (I) DJ (")

M' - - :::r

.P-3 Page 3 of 18 :z :z (I) 0 0 0 :I l,J....>

U1'0 l,J

'T~

NvJ CX>--"

0--"

Abstract of Examinations Performed System Pressure Test Program Sect XI SecL XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-084A-1-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.70 08/22/96 PIPING 1-SPM-084A-1-2 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST. 2 C-H C7.30 08/19/96 1-SPM-084A-1-2 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST. 2 C-H C7.70 08/19/96 1-SPM-084A-1-4 1-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.30 07/16/96 1-SPM-084A-1-4 1-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.70 07/16/96 1-SPM-084A-2-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.30 08/22/96 PIPING 1-SPM-084A-2-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.70 08/22/96 PIPING 1-SPM-084A-2-2 1-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H c7.30 07/16/96 1-SPM-084A-2-2 1-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.50 07/16/96 1-SPM-084A-2-2 1-CS-P-1A SUCTION AND DISCHARGE PIPING 2 C-H C7.70 07/16/96 1-SPM-084A-2-3 1-CS-P-1B SUCTION AND DISCHARGE PIPING 2 C-H C?.30 07/16/96 1-SPM-084A-2-3 1-CS-P-1B SUCTION AND DISCHARGE PIPING 2 C-H C7.50 07/16/96 1-SPM-084A-2-3 1-CS-P-1B SUCTION AND DISCHARGE PIPING 2 C-H C7.70 07/16/96 1-SPM-084A-2-7 OUTSIDE RECIRCULATION SPRAY PUMP SUCTION PIPING 2 C-H C7.30 03/16/97 FROM CONTAINMENT SUMP 1-SPM-084A-2-8 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H c7.30 08/22/96 PIPING 1-SPM-084A-2-8 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H c7.70 08/22/96 PIPING 1-SPM-084A-3-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.30 08/22/96 PIPING C, CJ) "IJ :z:,

OC'DO>rl' O""'J{Qr-t A ..... , rt) o, (1) Ill n rt ,- ~ ::r

'113 zz (1)

Page 4 of 18 0 0 0 :J

...... rt vi~

V1 -0 vi

';'~

"'vi oo~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-084A-3-1 REFUELING WATER STORAGE TANK AND CS PUMP SUCT 2 C-H c7.70 08/22/96 PIPING 1-SPM-084A-3-2 REFUEL! NG WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.30 08/22/96 PIPING 1-SPM-084A-3-2 REFUEL! NG WATER STORAGE TANK AND CS PUMP SUCT 2 C-H C7.70 08/22/96 PIPING 1-SPM-084A-3-3 RWST/CAT CROSS TIE PIPING 2 C-H C7.30 08/22/96 1-SPM-084A-3-3 RWST/CAT CROSS TIE PIPING 2 C-H C7.70 08/22/96 1-SPM-084A-3-4 REFUELING WATER CHEMICAL ADDITION TANK. 2 C-H C7.30 08/22/96 1-SPM-084A-3-4 REFUEL! NG WATER CHEMICAL ADDITION TANK. 2 C-H c7.70 08/22/96 1-SPM-084A-3-4 REFUELING WATER CHEMICAL ADDITION TANK. 2 C-H c7.50 08/22/96 1-SPM-084A-3-5 REFUELING WATER CHEMICAL ADDITION TANK. 2 C-H c7.10 08/22/96 1-SPM-084A-3-5 REFUELING WATER CHEMICAL ADDITION TANK. 2 C-H c7.30 08/22/96 1-SPM-084A-3-5 REFUEL! NG WATER CHEMICAL ADDITION TANK. 2 C-H C7.70 08/22/96 1-SPM-084B-1-3 "A" INSIDE RECIRC SPRAY PUMP 2 C-H c7.30 03/25/97 1-SPM-084B-1-3 "A" INSIDE RECIRC SPRAY PUMP 2 C-H c7.50 03/25/97 1-SPM-084B-1-3 11A11 INSIDE RECIRC SPRAY PUMP 2 C-H C7.70 03/25/97 1-SPM-084B-1-4 "B" I NS IDE RECIRC SPRAY PUMP 2 C-H c7.30 03/24/97 1-SPM-084B-1-4 "B" INSIDE RECIRC SPRAY PUMP 2 C-H C7.50 03/24/97 1-SPM-084B-1-4 "B" I NS IDE RECIRC SPRAY PUMP 2 C-H C7.70 03/24/97 1-SPM-084B-2-1 OUTSIDE RECIRCULATION SPRAY PUMP SUCTION PIPING 2 C-H C7.30 03/16/97 FROM CONTAINMENT SUMP 0 Cl) -o>

OCDO>r-t o-,ccr-t A_,, CD C>

Cl) '1)

,-tr--Jr,,::r n

0-3 Page 5 of 18 zz Cl) 0 :I 0 0 I>!~

U1 -0 I>!

?-;J NI>!

oo~

o~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-084B-2-1 OUTSIDE RECIRCULATION SPRAY PUMP SUCTION PIPING 2 C-H C7.70 03/16/97 FROM CONTAINMENT SUMP 1-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP 1-RS-P-2A 2 C-H C7.30 04/11/97 1-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP 1-RS-P-2A 2 C-H C7.50 04/11/97 1-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP 1-RS-P-2A 2 C-H C7.70 04/11/97 1-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP 1-RS-P-2B 2 C-H C7.30 04/09/97 1-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP 1-RS-P-2B 2 C-H C7.50 04/09/97 1-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP 1-RS-P-2B 2 C-H c7.70 04/09/97 1-SPM-085A-2-1 CONTAINMENT VACUUM PUMP "B" PENETRATION PIPING 2 C-H C7.30 03/26/97 1-SPM-085A-2-1 CONTAINMENT VACUUM PUMP "B" PENETRATION PIPING 2 C-H C7.70 03/26/97 1-SPM-085A-2-2 CONTAINMENT VACUUM PUMP "A" PENETRATION PIPING 2 C-H C7.30 03/26/97 1-SPM-085A-2-2 CONTAINMENT VACUUM PUMP "A" PENETRATION PIPING 2 C-H C7.70 03/26/97 1-SPM-086A-1-1 REACTOR COOLANT SYSTEM B-P B15.30 04/27/97 1-SPM-086A-1-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-1-1 REACTOR COOLANT SYSTEM B-P B15.60 04/27/97 1-SPM-086A-1-1 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-086A-1-2 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-1-2 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-086A-1-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-1-3 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-086A-1-4 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 C Ul "ti >

0 11) Ql ...

n,ccrt 7<"-* 11) Ql

11) Ql (")

rt - - :::r

-..j3 Page 6 of 18 zz 11) 0 0 0 :,

-h ...

vi~

U1 '° 0-..j vi N vi co~

o~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-D86A-1-4 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086A-1-5 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-1-5 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.30 04/27/97 1-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.60 04/27/97 1-SPM-086A-2-1 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086A-2-2 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-2-2 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086A-2-3 PRIMARY GRADE WATER INTO CONT. PENETRA Tl ON B-P B15.50 04/27/97 1-SPM-086A-2-3 PRIMARY GRADE WATER INTO CONT. PENETRATION B-P B15. 70 04/27/97 1-SPM-086A-2-4 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-2-4 REACTOR COOLANT SYSTEM B-P B15 .70 04/27/97 1-SPM-086A-2-5 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-2-5 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15 .10 04/27/97 1-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.30 04/27/97 1-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.60 04/27/97 1-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 C (I) "U :t>

OCDO>rt 1-SPM-086A-3-2 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 n,car1-7' -* rt) a, rt) a, n rt r- - ::r 003 Page 7 of 18 zz rt) 0 =1 0 0 w~

V1 '() w

~~

NW oo~

o~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-086A-3-2 REACTOR COOLANT SYSTEM B-P B15 .70 04/27/97 1-SPM-086A-3-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-3-3 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086A-3-4 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-3-4 REACTOR COOLANT SYSTEM B-P B15 .70 04/27/97 1-SPM-086A-3-5 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-3-5 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086A-3-6 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086A-3-6 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086B-1-1 REACTOR COOLANT SYSTEM B-P B15.20 04/27/97 1-SPM-086B-1-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086B-1-1 REACTOR COOLANT SYSTEM B-P B15 .70 04/27/97 1-SPM-086B-1-2 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086B-1-2 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-086B-1-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086B-1-3 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086B-1-4 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086B-1-4 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086B-1-5 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086B-1-5 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 C, Cl) .,, :>

o ro cu 1"'1-1-SPM-086B-2-1 PRIMARY GRADE WATER INTO CONTAINMENT PENETRATION 2 C-H c7.30 04/07/97 n,c.c.r+

A _., CD O>

(1) DJ (")

rtr-....;i.:r

-0 3 Page 8 of 18 zz (1) 0 0 0 ::,

vi~

U1 -0 vi

';' "";J Nvl oo~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-086B-2-1 PRIMARY GRADE WATER INTO CONTAINMENT PENETRATION 2 C-H C7.70 04/07/97 1-SPM-086C-1-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086C-1-1 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086C-1-2 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086C-1-2 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-086C-1-3 RVLIS TRAIN 11A11 INSIDE CONTAINMENT 2 C-H c7.30 04/28/97 1-SPM-086C-1-3 RVLIS TRAIN "A" INSIDE CONTAINMENT 2 C-H C7.70 04/28/97 1-SPM-086C-1-4 RVLIS TRAIN "A" AND "B" OUTSIDE CONTAINMENT 2 C-H c7.30 09/25/96 1-SPM-086C-1-4 RVLIS TRAIN "A" AND 11811 OUTSIDE CONTAINMENT 2 C-H C7.70 09/25/96 1-SPM-086C-1-5 RVLIS TRAIN "B" INSIDE CONTAINMENT 2 C-H c7.30 04/28/97 1-SPM-086C-1-5 RVLIS TRAIN 11911 INSIDE CONTAINMENT 2 C-H C7.70 04/28/97 1-SPM-086C-2-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-086C-2-1 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-086C-2-2 RVLIS TRAIN 11911 INSIDE CONTAINMENT 2 C-H C7.30 04/28/97 1-SPM-086C-2-2 RVLIS TRAIN 11911 INSIDE CONTAINMENT 2 C-H c7.70 04/28/97 1-SPM-087A-1-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-087A-1-1 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-087A-1-5 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-087A-1-5 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-087A-2-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 0 U) "'O OCDOlrt 1-SPM-087A-2-3 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 o,cart

,s- -* (1) 0, (1) 0, C')

rtr-N:J" 03 Page 9 of 18 :z :z (1) 0 0 0 ::J

-+, ....

vJ~

\.11 ,0 vJ

?~

NvJ oo~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-087A-2-4 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-087A-2-4 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-087A-2-5 LETDOWN HEADER 2 C-H C7.30 04/27/97 1-SPM-087A-2-5 LETDOWN HEADER 2 C-H C7.70 04/27/97 1-SPM-OBBA-1-2 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H C7.10 09/30/96 1-SPM-OBBA-1-2 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H C7.30 09/30/96 1-SPM-OBBA-1-2 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H c7.50 09/30/96 1-SPM-OBBA-1-2 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H C7.70 09/30/96 1-SPM-OBBA-1-3 BORIC ACID TRANSFER PUMP 1-CH-P-2B. 2 C-H C7.10 09/30/96 1-SPM-OBBA-1-3 BORIC ACID TRANSFER PUMP 1-CH-P-2B. 2 C-H C7.30 09/30/96 1-SPM-OBBA-1-3 BORIC ACID TRANSFER PUMP 1-CH-P-2B. 2 C-H C7.50 09/30/96 1-SPM-OBBA-1-3 BORIC ACID TRANSFER PUMP 1-CH-P-2B. 2 C-H C7.70 09/30/96 1-SPM-OBBA-2-1 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H C7.30 09/30/96 1-SPM-OBBA-2-1 BORIC ACID TRANSFER PUMP 1-CH-P-2A. 2 C-H C7.70 09/30/96 1-SPM-OBBA-2-2 BORIC ACID TRANSFER PUMP 1-CH-P-2B. 2 C-H c7.30 09/30/96 1-SPM-OBBA-2-2 BORIC ACID TRANSFER PUMP 1-CH-P-2B. 2 C-H C7.70 09/30/96 1-SPM-OBBA-3-1 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H c7.30 10/04/96 1-SPM-OBBA-3-1 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.70 10/04/96 1-SPM-OBBA-4-1 LETDOWN HEADER 2 C-H C7.30 04/27/97 1-SPM-OBBA-4-1 LETDOWN HEADER 2 C-H C7.70 04/27/97 0(1)"0)>

Oct>O>rt 1-SPM-OBBA-4-2 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.30 10/04/96 0 7'-*

-, C.C rt (1) C, (1) C, n rtr-N:J""

~3 Page 10 of 18 zz (1) 0 0 0 :J

-+, rt l.,J~

V1 '° l.,J

?-;-'

Nl>J ex,~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-088A-4-2 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.70 10/04/96 1-SPM-088A-4-3 NON REGENERATIVE HEAT EXCHANGER 1-CH-E-2 2 C-H C7.10 07/02/96 (CHARGING SIDE).

1-SPM-088A-4-3 NON REGENERATIVE HEAT EXCHANGER 1-CH-E-2 2 C-H C7.30 07/02/96 (CHARGING SIDE).

1-SPM-088A-4-3 NON REGENERATIVE HEAT EXCHANGER 1-CH-E-2 2 C-H C7.70 07/02/96 (CHARGING SIDE).

1-SPM-0886-1-11 MISC. CHARGING 1-CH-FCV-1113B 2 C-H C7.70 10/04/96 1-SPM-088B-1-11 MISC. CHARGING 1-CH-FCV-1113B 2 C-H C7.30 10/04/96 1-SPM-088B-1-2 SEAL RETURN HEADER 2 C-H c7.30 04/12/97 1-SPM-088B-1-2 SEAL RETURN HEADER 2 C-H C7.70 04/12/97 1-SPM-088B-1-3 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H C7 .10 07/03/96 PUMPS 1-SPM-088B-1-3 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H C7.30 07/03/96 PUMPS 1-SPM-088B-1-3 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H C7. 70 07/03/96 PUMPS 1-SPM-088B-1-4 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.10 10/04/96 1-SPM-088B-1-4 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.30 10/04/96 1-SPM-088B-1-4 VOLUME CONTROL TANK LETDOWN HEADER. 2 C-H C7.70 10/04/96 1-SPM-088B-2-1 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H C7.30 09/25/96 1-SPM-088B-2-1 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H C7.70 09/25/96 1-SPM-088B-2-2 RWST CROSSTIE 2 C-H C7.30 08/18/96 CJ(/) ""CJ>

0 CD Cl r-t 1-SPM-088B-2-2 RWST CROSSTI E 2 C-H C7.70 08/18/96 0 , (Q r-t 7' ~. (1) a, ro a, n r-tr-N:r N3 Page 11 of 18 :z :z (1) 0 0 0::,

-+, ...

w~

lJ1 '() w 0--.j NW ex,~

o~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-088B-2-3 CHARGING ALTERNATE HEADER 2 C-H C7.30 08/15/96 1-SPM-088B-2-3 CHARGING ALTERNATE HEADER 2 C-H C7.70 08/15/96 1-SPM-088B-2-4 "A" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H c7.30 07/02/96 CHARGING PUMPS.

1-SPM-088B-2-4 "A" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H C7. 70 07/02/96 CHARGING PUMPS.

1-SPM-088B-2-5 CHARGING PUMPS 1A, 1B. AND 1C. 2 C-H c7.30 09/23/96 1-SPM-088B-2-5 CHARGING PUMPS 1A, 1B. AND 1C. 2 C-H C7.50 09/23/96 1-SPM-088B-2-5 CHARGING PUMPS 1A, 1B. AND 1C. 2 C-H c7.70 09/23/96 1-SPM-088B-2-6 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H c7.30 07/03/96 PUMPS 1-SPM-088B-2-6 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H C7.70 07/03/96 PUMPS 1-SPM-088B-2-7 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C7.30 09/23/96 1-SPM-088B-2-7 CHARGING PUMP DISCHARGE SAMPLING LINES 2 C-H C7. 70 09/23/96 1-SPM-088C-1-1 REACTOR COOLANT SYSTEM B-P B15. 70 04/27/97 1-SPM-088C-1-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-088C-1-2 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-088C-1-2 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-088C-1-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-088C-1-3 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-088C-1-4 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H c7.30 09/25/96 0(1)-U)>

OCDWrt 1-SPM-088C-1-4 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H C7.70 09/25/96 n,ccrt 7<' -* Cl) Ol Cl) Ol (")

rtr-N:::T vJ3 Page 12 of 18 zz Cl) 0 0 0 ::,

..... rt l,J __,.

V1 -0 l,J NvJ 00 __,.

0--"

Abstract of Examinations Performed System Pressure Test Program Sect XI SecL XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-088C-1-5 REGENERATIVE HEAT EXCHANGER (CHARGING SIDE) AND 2 C-H C7.10 04/27/97 ASSOCIATED PIPING.

1-SPM-088C-1-5 REGENERATIVE HEAT EXCHANGER (CHARGING SIDE) AND 2 C-H c7.30 04/27/97 ASSOCIATED PIPING.

1-SPM-088C-1-5 REGENERATIVE HEAT EXCHANGER (CHARGING SIDE) AND 2 C-H c7.70 04/27/97 ASSOCIATED PIPING.

1-SPM-088C-1-6 REACTOR COOLANT SYSTEM 8-P 815.50 04/27/97 1-SPM-088C-1-6 REACTOR COOLANT SYSTEM 8-P 815.70 04/27/97 1-SPM-088C-1-7 SEAL RETURN HEADER 2 C-H C7.30 04/12/97 1-SPM-088C-1-7 SEAL RETURN HEADER 2 C-H C7.70 04/12/97 1-SPM-088C-1-8 CHARGING ALTERNATE HEADER 2 C-H c7.30 08/15/96 1-SPM-088C-1-8 CHARGING ALTERNATE HEADER 2 C-H C7.70 08/15/96 1-SPM-088C-1-9 LETDOWN HEADER 2 C-H c7.10 04/27/97 1-SPM-088C-1-9 LETDOWN HEADER 2 C-H c7.30 04/27/97 1-SPM-088C-1-9 LETDOWN HEADER 2 C-H c7.70 04/27/97 1-SPM-088C-2-1 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H C7.30 09/25/96 1-SPM-088C-2-1 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H C7.70 09/25/96 1-SPM-088C-2-2 SEAL RETURN HEADER 2 C-H c7.30 04/12/97 1-SPM-088C-2-2 SEAL RETURN HEADER 2 C-H C7.70 04/12/97 1-SPM-088C-2-3 REACTOR COOLANT PUMP SEAL INJECT ION LINES 2 C-H c7.30 04/27/97 1-SPM-088C-2-3 REACTOR COOLANT PUMP SEAL INJECTION LINES 2 C-H C7.70 04/27/97 1-SPM-088C-2-4 REACTOR COOLANT PUMP'~" SEAL RETURN LINE. 2 C-H c7.30 04/12/97 ocn-o:r>

0 CD m r-t o-,mr 7<" -* (1) 0, (1) 0, n r-t.-N::r

+'3 Page 13 of 18 zz (1) 0 0 0 :J l,J~

l.n '° l,J

~~

I\J l,J o,~

o~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-088C-2-4 REACTOR COOLANT PUMP "A" SEAL RETURN LI NE. 2 C-H C7.70 04/12/97 1-SPM-088C-2-5 REACTOR COOLANT PUMP 11 811 SEAL RETURN LI NE. 2 C-H C7.30 04/12/97 1-SPM-088C-2-5 REACTOR COOLANT PUMP 11 811 SEAL RETURN LINE. 2 C-H C7.70 04/12/97 1-SPM-088C-2-6 REACTOR COOLANT PUMP "C" SEAL RETURN LI NE. 2 C-H c7.30 04/12/97 1-SPM-088C-2-6 REACTOR COOLANT PUMP "C" SEAL RETURN LI NE. 2 C-H c7.70 04/12/97

1-SPM-088C-2-7 CHARGING ALTERNATE HEADER 2 C-H c7.30 08/15/96 1-SPM-088C-2-7 CHARGING ALTERNATE HEADER 2 C-H C7.70 08/15/96 1-SPM-088C-2-8 REACTOR COOLANT SYSTEM 8-P 815.50 04/27/97 1-SPM-088C-2-8 REACTOR COOLANT SYSTEM 8-P 815.60 04/27/97 1-SPM-088C-2-8 REACTOR COOLANT SYSTEM 8-P 815. 70 04/27/97 1-SPM-089A-1-1 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H c7.30 04/15/97 1-SPM-089A-1-1 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H c7.70 04/15/97 1-SPM-089A-1-4 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST. 2 C-H C7.30 08/19/96 1-SPM-089A-1-4 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST. 2 C-H c7.70 08/19/96 1-SPM-089A-1-6 RWST CROSSTIE 2 C-H C7.30 08/18/96 1-SPM-089A-1-6 RWST CROSSTIE 2 C-H c7.70 08/18/96 1-SPM-089A-1-8 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST. 2 C-H c7.30 08/19/96 1-SPM-089A-1-8 LOW HEAD SAFETY INJECTION PUMP SUCTION FROM RWST. 2 C-H c7.70 08/19/96 1-SPM-089A-2-1 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 04/15/97 1-SPM-089A-2-1 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 04/15/97 C, (/) , , :,:,.

OCDD>rt 1-SPM-089A-2-2 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7.30 04/24/97 o,ccrt 7' -* (1) Cl (1) Cl (")

rt .- N ::r U1 3 Page 14 of 18 zz (1) 0 0 0 ::J

..... rt

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-089A-2-2 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H c7.70 04/24/97 1-SPM-089A-2-5 LOW HEAD SAFETY INJECTION DISCHARGE PIPING TO 2 C-H C7.30 08/15/96 MOV-1890C.

1-SPM-089A-2-5 LOW HEAD SAFETY INJECTION DISCHARGE PIPING TO 2 C-H C7.70 08/15/96 MOV-1890C.

1-SPM-089A-2-7 "A" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H C7.30 07/02/96 CHARGING PUMPS.

1-SPM-089A-2-7 "A" LOW HEAD SAFETY INJECTION PUMP CROSS-TIE TO 2 C-H C7.70 07/02/96 CHARGING PUMPS.

1-SPM-089A-2-8 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H c7.30 07/03/96 PUMPS 1-SPM-089A-2-8 SEAL RETURN HEADER AND VCT DRAIN TO THE CHARGING 2 C-H C7.70 07/03/96 PUMPS 1-SPM-089A-3-2 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7*.30 04/24/97 1-SPM-089A-3-2 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7.70 04/24/97 1-SPM-089A-3-3 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H c7.30 09/25/96 1-SPM-089A-3-3 CHARGING HEADER AND SEAL INJECTION FILTER. 2 C-H C7.70 09/25/96 1-SPM-089A-3-4 CHARGING ALTERNATE HEADER 2 C-H C7.30 08/15/96 1-SPM-089A-3-4 CHARGING ALTERNATE HEADER 2 C-H c7.70 08/15/96 1-SPM-0898-1-1 REACTOR COOLANT SYSTEM 8-P 815.50 04/27/97 1-SPM-0898-1-1 REACTOR COOLANT SYSTEM 8-P 815.70 04/27/97 1-SPM-0898-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7 .10 04/15/97 1-SPM-0898-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 04/15/97 ou,.:,:,,.

OCDO>rt 1-SPM-0898-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 04/15/97 n , ca n-

""....,, CD m (1) OJ (')

rt r - N ::::r 0-3 zz Page 15 of 18 0 0 0 (1)

J

-+, ,..,.

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-089B-1-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-089B-1-3 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-089B-1-4 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H c7.30 04/24/97 1-SPM-089B-1-4 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H c7.70 04/24/97 1-SPM-089B-1-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 04/15/97 1-SPM-089B-1-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 04/15/97 1-SPM-089B-1-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 04/15/97 1-SPM-089B-1-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.70 04/15/97 1-SPM-089B-2-1 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-089B-2-1 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-089B-2-2 LOOP "B" SAFETY INJECTION ACCUMULATOR 2 C-H C7.10 04/15/97 1-SPM-089B-2-2 LOOP "B" SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 04/15/97 1-SPM-089B-2-2 LOOP 11 811 SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 04/15/97 1-SPM-089B-2-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-089B-2-3 REACTOR COOLANT SYSTEM B-P B15.70 04/27/97 1-SPM-089B-2-4 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7.30 04/24/97 1-SPM-089B-2-4 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7.70 04/24/97 1-SPM-089B-2-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 04/15/97 1-SPM-089B-2-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H c7.70 04/15/97 1-SPM-089B-2-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H c7.30 04/15/97 0 Cl) "C >

0 CD CU r-t 1-SPM-089B-2-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H c7.70 04/15/97 o-,<art 7'" -* CD OJ CD OJ rt ,- N :,-

n

--.J3 Page 16 of 18 zz CD 0 0 0 ::::,

vJ~

V, -0 vJ

~-;,J NvJ co~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-0896-3-1 REACTOR COOLANT SYSTEM B-P 815.50 04/27/97 1-SPM-0896-3-1 REACTOR COOLANT SYSTEM B-P 815.70 04/27/97 1-SPM-0896-3-2 LOOP 11 C11 SAFETY INJECT ION ACCUMULATOR 2 C-H C7.10 04/15/97 1-SPM-089B-3-2 LOOP 11 C11 SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 04/15/97 1-SPM-089B-3-2 LOOP 11 C11 SAFETY INJECTION ACCUMULATOR 2 C-H c7.70 04/15/97 1-SPM-0896-3-3 REACTOR COOLANT SYSTEM B-P B15.50 04/27/97 1-SPM-089B-3-3 REACTOR COOLANT SYSTEM B-P 815.70 04/27/97 1-SPM-0896-3-4 LHS! AND HHS! TO HOT AND COLD LEGS 2 C-H C7.30 04/24/97 1-SPM-089B-3-4 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7.70 04/24/97 1-SPM-0896-3-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 04/15/97 1-SPM-0896-3-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 04/15/97 1-SPM-089B-3-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 04/15/97 1-SPM-0896-3-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H c7.70 04/15/97 1-SPM-0896-4-1 REACTOR COOLANT SYSTEM B-P 815.50 04/27/97 1-SPM-0896-4-1 REACTOR COOLANT SYSTEM B-P 815.70 04/27/97 1-SPM-0896-4-2 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H C7.30 04/24/97 1-SPM-089B-4-2 LHSI AND HHS! TO HOT AND COLD LEGS 2 C-H c7.70 04/24/97 1-SPM-090C-1-1 POST ACCIDENT GASEOUS WASTE SAMPLE 2 C-H C7.30 03/28/97 1-SPM-090C-1-1 POST ACCIDENT GASEOUS WASTE SAMPLE 2 C-H C7.70 03/28/97 1-SPM-090C-1-2 HYDROGEN ANALYZER 104 RETURN 2 C-H C7.30 03/27/97 0 U) -a )>

OCDOl.-t 1-SPM-090C-1-2 HYDROGEN ANALYZER 104 RETURN 2 C-H c7.70 03/27/97 (') -, (.Q rt 7' ~. CD Ol CD Ol n rtr-N::::r 0:,3

z :z CD Page 17 of 18 0 0 0 :,

-+, ...

l,J~

V1'0 l,J

~-;-a N vJ co~

a~

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date Remarks 1-SPM-090C-1-3 HYDROGEN ANALYZER 204 RETURN 2 C-H C7.30 03/25/97 1-SPM-090C-1-3 HYDROGEN ANALYZER 204 RETURN 2 C-H C7.70 03/25/97 1-SPM-090C-1-4 CONTAINMENT VACUUM PUMP "8" PENETRATION PIPING 2 C-H C7.30 03/26/97 1-SPM-090C-1-4 CONTAINMENT VACUUM PUMP 11911 PENETRATION PIPING 2 C-H C7.70 03/26/97 1-SPM-090C-1-5 CONTAINMENT VACUUM PUMP IIAII PENETRATION PIPING 2 C-H C7.30 03/26/97 1-SPM-090C-1-5 CONTAINMENT VACUUM PUMP "A" PENETRA Tl ON PIPING 2 C-H c7.70 03/26/97 1-SPM-124A-1-2 "A" S/G SLOWDOWN 2 C-H C7.30 04/27/97 1-SPM-124A-1-2 "A" S/G SLOWDOWN 2 C-H C7.70 04/27/97 1-SPM-124A-2-2 11 811 S/G SLOWDOWN 2 C-H C7.30 04/27/97 1-SPM-124A-2-2 "B" S/G SLOWDOWN 2 C-H c7.70 04/27/97 1-SPM-124A-3-2 11c11 S/G SLOWDOWN 2 C-H C7.30 04/27/97 1-SPM-124A-3-2 11 C11 S/G SLOWDOWN 2 C-H C7.70 04/27/97 1-SPM-130B-1-2 PARTICULATE RAD MONITOR INTO CTMT 2 C-H C7.30 03/23/97 1-SPM-1308-1-2 PART! CULATE RAD MONITOR INTO CTMT 2 C-H C7.70 03/23/97 2-SPM-089A-1-6 RWST CROSST!E 2 C-H C7.30 08/18/96 2-SPM-089A-1-6 RWST CROSSTIE 2 C-H C7.70 08/18/96 OU>"'U)>

ommrt Ol<Or-t ro -*

o, ro o°'

t"'tr-N:r

-03 Page 18 of 18 zz ro 0 0 0 :,

* -+, rt

Attachment 1 Page 30 of 33 Serial No.: 97-311 Docket No.: 50-280

Abstract of Examinations Snubber Program SNUBBER PROGRAM Snubber visual inspection was performed in accordance with Technical Specifications (T.S.) 4.17, no visual failures were identified during the inspection.

Fifty-one (51) snubbers were selected for functional testing and seal replacements this refueling outage. No failures were identified. All snubbers were as-left visually inspected satis-factorily prior to Unit 1 start-up.

Page 1 of 1

Attachment 1 Page 31 of 33 Serial No.: 97-311 Docket No.: 50-280

Abstract of Examinations Eddy Current Examinations of Nonferromagnetic Steam Generator Tubing Inservice examination was performed on steam generator "A".

In Steam Generator "A" all available tubes were inspected full length with bobbin probes, except three. Three row one tubes:

Rl-C35, Rl-C36, and Rl-C37 were plugged due to restrictions that would not allow the bobbin probe to pass through. A 739 tube sample was tested with Rotating Pancake Coil (RPC) probes in the hot leg transition (TSH +/- 3") region. Supplemental examina-tions were also performed using RPC probes where additional confirmatory or other data was desired. The following tubes were plugged:

Row Column 1 35 1 36 1 37 32 68 14 85 This Steam Generator ("A") contains a total of eleven plugged tubes. See the attached l i s t , on page 2, for details of the inspection performed this refueling outage.

Page 1 of 3

Attachment 1 Page 32 of 33 Serial No.: 97-311 Docket No.: 50-280 Row Column Indication Location Remarks

33 37 1

16 22 35 10 10 RST AV2 AVl TEC plugged*

1 36 RST TEC plugged*

1 37 RST TEC plugged*

46 43 13 AVl 46 45 13 AVl 32 68 16 AVl plugged 32 68 25 AV2 plugged**

32 68 17 AV3 plugged 32 69 17 AV2 32 69 12 AV4 37 72 14 AV4 37 75 18 AV2

14 85 PVN plugged***

Preventively plugged due to restriction of tube.

- Preventively plugged due to indication recent growth rate calculated at approximately 3.7% per fuel cycle since the last inspection of this tube based on a maximum indication of 25% through wall.

- - Preventively plugged, due to permeability variations, this tube is considered unsuitable for inspection.

Page 2 of 3

Attachment 1 Page 33 of 33 Serial No.: 97*311 Docket No.: 50-280 GLOSSARY OF TERMS

1.

2.

AVl, AV2, AV3, AV4 55 Anti-Vibration Bars 1 through 4.

A number in the indication column shows the%

through wall depth of the indication.

3. IND INDICATION Character codes and numerics that represent the analysis results of the data for that tube, e.g., RST, 25%, etc.

4. LOCN LOCATION The location in the tube of the INDICATION called.

5* PVN PERMEABILITY VARIATION If extreme may mask actual anomalies or indications.

6. ROW, COL COLUM:N Tube identifier numbers an X-Y coordinate system.

7. RST RESTRICTED Indicates that the probe listed in the record would not physically pass the location specified.

8* TEC Tube End, Cold Leg.

9* TSH Top of Tubesheet Hot Leg.

Note: Where no comment appears in the remarks column the tube is still in service.

Page 3 of 3

Attachment 2 Surry Power Station Unit 1 Inservice Inspections Repairs and Replacements NIS-2 Forms

Attachment 2 Page 1 of 64 Serial No.: 97*311 Docket No.: 50*280

Repair and Replacements Repairs and replacements completed during this refueling outage were performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code, 1989 Edition.

The following, paragraphs and the attached NIS-2 Forms represent those repair~* .and replacements performed on Class 1 and Class 2 systems:

RR# 94-:140, :t~place bonnet assembly on valve 1-FC-69. This replacement was performed on work order 00264804-01, and complet-ed on 7-24:..96.

RR# 95-150, replace valve 1-RC-PCV-1455B. This replacement was performed on work order 00299329-01, and completed on 3-31-97.

RR# 96-094; replace check valve 1-FC-50. This replacement was performed on work order 00321729-02, and completed on 7-23-96.

RR# 96-100, replace fasteners on flanged connection for tempera-ture element.1-CH-TK-1164. This replacement was performed on work order 00344553-01, and completed on 7-8-96.

RR# 96-105; replace steam trap station l-MS-TD-9. This replace~

ment was performed on work order 00295298-07, and completed on 4-5-97. i RR# 96-i12, overhaul gate valve 1-RH-MOV-1720A. This replacement was performed on work order 00329566-01, and completed on 3 97.

RR# 96-113, overhaul valve 1-RH-MOV-1720B. This replacement was performed on work order 00329369-01, and completed on 3-29-97.

97.

RR# 96-116, replace trim assembly on valve 1-CH-FCV-2114A. This replacement was performed on work order 00351738-01, and complet-ed on 9 - 2 5 - 9 6 . .

RR# 96-121, replace fasteners on 1-CH-P-2B. This replacement was performed on work order 00352273-01, and completed on 10-25-96.

RR# 96-133, replace valve 1-MS-197. This replacement was per-formed on work order 00353755-01, and completed on 4-13-97.

RR# 97-010, replace*cover (3/8 11 ) cap screws, studs and nuts on valve 1-MS-182. This replacement was performed on work order 00346881-01, and completed on 3-10-97 .

Page 1 of 5 I

L __j

Attachment 2 Page 2 of 64 Serial No.: 97-311 Docket No.: 50-280 RR# 97-011; replace cover (3/8") cap screws, studs and nuts on valve 1-MS-178. This replacement was performed on work order 00346878-01, and completed on 3-10-97.

RR# 97-012, replace cover (3/8") cap screws, studs and nuts on valve 1-MS-176. This replacement was performed on work order 00346871-01, and completed on 4-*2-97.

RR# 97-015/97~072, overhaul valve 1-RC-PCV-1455C and replace bonnet bolting. This replacement was performed on work order 00340247-01, and completed on 3-25-97.

RR# 97-016, replace trim assembly and bonnet bolting on valve 1-RC-PCV-1455B. This replacement was performed on work order 00299329-05, and completed on 3-31-97.

RR# 97-017, replace internals on valve 1-SI-130. This replace-ment was performed on work order 00306891-01, and completed on 3-28-97.

RR# 97-018, replace internals on valve 1-SI-147. This replace-ment was performed on work order 00328809-01, and completed on 3-30-97.

RR# 97-021, replace trim with Class III shut-off trim on valve 1- )

MS-PCV-102B. This replacement was performed on work order 00353102-01, and completed on 3-20-97.

RR# 97-022, replace trim with Class VI shut-off trim on valve 1-MS-PCV-102A. This replacement was performed on work order 00353100-01, and completed on 3-20-97.

RR# 97-024, remove, test, repair as required and reinstall valve 1-RC-SV-1551A. This replacement was performed on work order 00346645-01, and completed on 4-15-97.

RR# 97-025, remove, test, repair as required and reinstall valve 1-RC-SV-1551B. This replacement was performed on work order 00346646-01, and completed on 4-15-97.

RR# 97-026, remove, test, repair as required and reinstall valve 1-RC-SV-1551C. This replacement was performed on work order 00346647-01, and completed on 4-15-97.

RR# 97-031, replace pipe 1-FW-PP5D-10 and elbow 1-FW-PSF2-103.

This replacement was performed on work order 00346920-11, and completed on 4-10-97.

RR# 97-032, replace elbow 1-FW-PSF2-102. This replacement was performed on work order 00346920-12, and completed on 4-9-97.

Page 2 of 5

Attachment 2 Page 3 of 64 Serial No.: 97*311 Docket No.: 50*280 RR# 97-033, 2" letdown piping. This replacement was performed on work order 00353870-01, and completed on 3-29-97.

RR# 97-034, modify-fabricate-install supports on letdown piping.

This replacement was performed on work order 00353870-02, and completed on 4-1-97.

RR# 97-035, replace 2" orifice and piping. This replacement was performed on work order 00353870-05, and completed on 3-29-97.

RR# 97-036, replace 2" orifice and piping. This replacement was performed on work order 00353870-06, and completed on 3-29-97.

RR# 97-037, replace 2" orifice and piping. This replacement was performed on work order 00353870-07, and completed on 3-29-97.

RR# 97-038, replace cap screws on filter l-CH-FL-4B. This replacement was performed on work order 00329195-01, and complet-ed on 3-10-97.

RR# 97-048, replace bolting on pump casing 1-CH-P-lB. This replacement was performed on work order 00345549-01, and complet-ed on 3-25-97.

RR# 97-054, weld jacking blocks on pump flange 1-RC-P-lA. This replacement was performed on work order 00326418-05, and complet-ed on 4-5-97.

RR# 97-059, replace trim assembly on valve l-RC-PCV-1455A. This replacement was performed on work order 00361900-01, and complet-ed on 3-31-97.

RR# 97-060, fabricate snubber support per DCP 93-048. This replacement was performed on work order 00361814-01, and complet-ed on 4-12-97.

RR# 97-061, replace 14" elbow l-FW-PSF2-63, 62 and pipe PPSD-13.

This replacement was performed on work order 00346920-16, and completed on 4-9-97.

RR# 97-062, replace elbow on line 14"-WFPD-9-601. This replace-ment was performed on work order 00346920-14, and completed on 4-9-97.

RR# 97-063, replace 14" elbow l-FW-PSF2-80. This replacement was performed on work order 00346920-08, and completed on 4-9-97.

RR# 97-080, weld repair indications on valve l-CH-HCV-1200A (inlet). This repair was performed on work order 00359546-03, and completed on 3-23-97.

Page 3 of 5

Attachment 2 Page 4 of 64 Serial No.: 97-311 Docket No.: 50-280 RR# 97-081, replace bonnet on valve 1-CH-198. This replacement was performed on work order 00331691-01, and completed on 3 97.

RR# 97-083, grind weld flush with pipe on line 14"-WFPD-17-601.

This repair was performed on work order 00350675-03, and complet-ed on 3-25-97.

RR# 97-084, repair steam cut in flange face on 1-MS-RV-lOlB.

This repair was performed on work order 00328556-05, and complet-ed on 4-4-97.

RR# 97-086, replace trim assembly on valve 1-CH-PCV-1122. This replacement was performed on work order 00361402-02, and complet-ed on 3-27-97.

RR# 97-088, replace trim assembly, cage spacer and cover bolting on valve 1-RC-PCV-1456. This replacement was performed on work order 00362273-01, and completed on 4-2-97.

RR# 97-089, overhaul valve 1-CH-HCV-1200A. This replacement was performed on work order 00359546-01, and completed on 3-28-97.

RR# 97-090, replace trim assembly on valve 1-CH-HCV-1200C. This replacement was performed on work order 00359548-01, and complet-ed on 3-26-97.

RR# 97-091, replace trim assembly on valve 1-CH-HCV-1200B. This replacement was performed on work order 00359547-01, and complet-ed on 3-28-97.

RR# 97-092, replace checkvalve 1-FW-58 and 3" piping. This replacement was performed on work order 00360924-02, and complet-ed on 4-12-97.

RR# 97-093, replace 3" checkvalve 1-FW-27 and 3" piping. This replacement was performed on work order 00360923-02, and complet-ed on 4-9-97.

RR# 97-096, overhaul valve 1-RC-MOV-1587. This replacement was performed on work order 00328784-02, and completed on 4-7-97.

RR# 97-097, repair weld indication on weld 7-0lBC on line No. 2"-

SI-81-1502, shown on drawing 11448-WMKS-0122Kl. This repair was performed on work order 00362393-01, and completed on 3-30-97.

RR# 97-098, cut 1~" SS pipe and fit for socket flange and short line. This repair was performed on work order 00343858-04, and completed on 4-9-97.

RR# 97-100, replace snubber l-MS-HSS-7. This replacement was performed on work order 00345586-01, and completed on 4-3-97.

Page 4 of 5 J

Attachment 2 Page 5 of 64 Serial No.: 97-311 Docket No.: 50-280 RR# 97-101, replace snubber 1-SI-HSS-26. This replacement was performed on work order 00345608-01, and completed on 3-28-97.

RR# 97~102, replace snubber 1-MS-HSS-11. This replacement was performed on.work order 00345603-01, and completed on 4-2-97.

RR# 97-103, repair base metal indication on 1-FW-PPS-87. This repair ~as performed on work order 00346920-16, and completed on 4-9-97.

RR# 97-109, replace valve 1-BD-11. This replacement was per-formed on work order 00363201-02, and completed on 4-14-97.

RR# 97-111, remove/replace snubber 1-RC-MSS-218. This replace-ment was performed on work order 00363216-01, and completed on 4-13-97.

RR# 97-112, replace bolting on 2" flange 1-SI-LT-1926. This re-placement was performed on work order 00363429-01, and completed on 4-16-97.

Page 5 of 5

Attachment 2 Page 6 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ _10/8/96

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Unit _ One Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00264804-0l, RR#94-140 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_--"v_,_i,,_rg,.1""*n"-'1..,*a.__.P-"o""w-"'e=-r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _..,N,:,A~-------

Name NA Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Spent

___ Fuel

__ Pit

__ Cooling 31 1 1 7

5. (al Applicable Construction Code B ' 19~Edition,_N_A_ _ _ _ _ _ Addenda, __N_-__'_N_-__ _ _ Code Casa (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Bonnet Assembly Grinnell NA NA l-FC-69 NA Replaced No ITT 93-60567-Bonnet Assembly Eng. Valves 1-1 NA l-FC-69 NA Replacement No

7. Description of Work Replace bonnet assembly.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. _ _ _ _ _ _°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. *

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

_J

l I PO# CNT-441725 (bonnet assembly)

FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and th is replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp ______N_A_______________________________

Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A___________

SignedW jJ) .,r// fs..z:- Date_-a~'rl..........,2"';,-.....;r'~----, 19 96 Owner or ~ ~ s l g n e e , Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, ~t.

h i~ted the components described

/ q0'/ ft 6 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~. "?'7-. ' Va. 883

+~----=---'--~"----'--"--_.c.,------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

-lnspecto~ National Board, State, Province, and Endorsements Date

Attachment 2 Page 7 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00299329-0l, RR#95-150 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by Virginia Power

Type Code Symbol Stam&.----N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A _ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System _ _ _ _Reactor

____ Coolant

_ _ _System B31.1 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Copes-4" Valve Vulcan, Inc. CV2103 NA 1-RC-PCV-1455B NA Replacement No Consolidated 4" Pipe Power Supply NA NA 1-RC-PCV-1455B NA Replacement No

7. Description of Work Replace 4" ss valve body.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. _ _ _ _ _ _° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 0

I

_ ___j

}i'O# - CNT-51,9276 FORM NIS-2 (Back)

(4" Valve); CNT-545450 (4" Pipe) ,

1 1 1

9. R e m a r k ' s ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ~ ' * - - - - - - - ' - - ~ ' - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _ _N_A ___________ Expiration Date _____N_A ___________

Signe~ £. d ~/ .ZS..C

~Jvn~er'sl5eslgnee, Title Date _--'l~Fld:=.o.',!...____./~Jl"...___ _ _ _ , 19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State 92 or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

,-,.~.,----,-,----,-----hav7_ir:i~cted the components described in this Owner's Report during the period 6to /q/2'~£'D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_____,._a=-- ___ Commissions _ _ _ _ _ _ _V_a_._8_ 8_3_ _ _ _ _ _ _ _ _ __

........t:7""=-.___---c.,~F-'-'+~"'"~-=-,.-=c---**

lnspectorsStgnatu~ National Board, State, Province, and Endorsements Date_ _ ~b-+-/r9 7

____5~_19 Z>

L

Attachment 2 Page 8 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _10/8/96

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Address

2. Plant _ Surry

_ _ _ _Power

_ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ One Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00321729-02, RR#96-094 Address Repair Organization P.O. No,, Job No., etc.

3. Work Performed by_--"-v""ir:.:ga1,1._.*n..,.ia,aa..._..P.,,,o.,,_we,,_r,___ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.:,NA:..o. . ._ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre111

4. Identification of System _ _ _ _ Spent___ Fuel__ Pit

__ Cooling 1 7

5. (al Applicable Construction Code 83 1. 1 19_5_5_ Edition,_N_A_ _ _ _ _ _ Addenda, __ N_-_'_N_-____ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Check Valve Anchor/Darling NA NA 1-FC-50 NA Replaced No Check Valve Anchor/Darling EZ677-1-1 NA 1-FC-50 NA Replacement No Dubose Nationa Ht. # 4600 1 2 1/2" Pipe Energy Service: Ht. Code S ~VIK NA 1-FC-50 NA Replacement No

7. Description of Work Replace check valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure [i2{"

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-520581 (check valve), SSY-413738 (2 1/2 II pipe)

9. Remarks_'*-~-------------------*-**_*_ _ _ _ _ _ _ _ _ _ _ _ _ _*._!--,---'------,------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp ______N_A________________________________

Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - NA--------------

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct.

hab' i~cted the components described

/q '4 ?,, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any m*anner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Al.~~-

Inspector's Signature Va. 883

_ _ _ _ _......G.LJ-=-~,.....___,-~~~---"--------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date

Attachment 2 Page 9 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date_l_0~/_8_/_9_6_ _ _ _ _ _ _ _ _ _ __

1. Ow ner - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _- ' - - - - - - - - - - - ~

Addre1&

Surry Power Station One

2. P l a n t - - - - - - - - - - - - - , . . , - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#00344553-01, RR#96-100 Address Repair Organization P.O. No., Job No.,.etc.

3. Work Performed by_....,.v...

n.,_;...,a._..e...

i r..,g""1... w..

a .... er.__ _ _ _ _ _ _ __ Type Code Symbol Stamp _ ___,w,.._ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __

Same as above Expiration Date _ _--=NAc.;;..._ _ _ _ _ _ _ _ _ __

Address

.4. Identification of System ____c _ h _ a _ r - = g ' - i _ n = - g - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

7

5. (a) Applicable Construction Code B3 l.l 19~1;dition,_N_A______ Addenda, __ N_-i_._N_-__ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced .and Replacement *components ASME Code National Repaired, Stamped Name*of Name of Manufacturer

Board

Other *- Year Replaced, (Yes

.Component Manufacturer Serial No. No . ldentificatio_n Built or Replacement or No)

Studs Mackson, Inc. NA NA 1-CH-TK-lB NA Replacement No Nuts Mackson, In.c. NA NA 1-CH-TK-1B NA Replacement No

7. Description of Work Replace fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operatin'g Pressure D Other O Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# BNT-467650 (studs and nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _~__N_A ________________________________

Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ____________

Signed CJ£.. /

~slgnee,

-: : :Z:-t:"f Title Date_~a~.... r::"-"'--T'-----. 19 9..{

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

,<'- ~-'---;J,'~"'+-~~-+-<'+-"'~'--*----Commissions _ _ _ _ _v_a_._B_B_3_ _ _ _ _ _ _ __

~ig~re National Board, State, Province, and Endorsements Date_ _ _~/~/)-#-'/;.__.r'.~19 7' 6

Attachment 2 Page 10 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/30/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 2 Sheet of _ _ _ _ _ _ _ _ _ _ _ _ __

Address Surry Power Station One

2. P l a n t - - - - - - - - - - - - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00295298-07, RR#96-105 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r"'g_in_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stainf----N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Main

_ _Steam

___ System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Dubose Nationa 1 1/2" Pipe Energy Srvc, Ir c. NA NA 1-MS-TD-9 NA Replacement No Energy & Proceis 1 1/2" Elbow Corporation NA NA 1-MS-TD-9 NA Replacement No Energy & Proceis 1 1/2" Tee Corporation NA NA 1-MS-TD-9 NA Replacement No 1 1/2" Piston Check Valve Velan Pl-79522-N NA 1-MS-TD-9 NA Replacement No Dubose Nationa 1 1/2" Coupling Energy Srvc, I1 c. NA NA 1-MS-TD-9 NA Replacement No

7. Description of Work Replace steam trap station.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

I I

. I I

.[ ~

I: t*

FORM NIS-2 (Back)

!:!O # CNT-499434 (1 1/2" Pipe); CNT-494461 (1 1/2" Elbow)

9. R~"]arks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CNT-471799 (1 1/2" Tee); CNT-463179 (1 1/2" Piston Check W)

CNT-455210 (1 1/2" Coupling)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp ______N_A________________________________

of A~uthor~izationNo. _____N_A Certifica(£.te ___ t'_____*___ Expiration Dat~ _ _ _ _N_A ___________

Signed * ~ ~ ,e;,.,,ful!,e!".<~ ...'4:...--.l~----, 19 Date-~4~~..,.,4'lc ~?

\/llll~O'sD7slinee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct.

h~ ~ected the components described in this Owner's Report during the period O ' to /0 Y~J?{) , and state that 7

to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the I examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property.damage or a loss of any kind arising from or connected with this inspection.

_ / / ~ ~

7T..._.

~-~"""=_..._Cd_~~.,..,..'~-.,.*~*

Va. 883

-.*~~--*.....,.-Commissions _ _ _ _- , - - - - - - - - - , - - - - - . , - - - - -

1nspector's Signatu*re

National Board, State, Province, and Endorsements Date_ _ _ _ ,=-+-/(_/_~

I

__ C/7 19

Attachment 2 Page 11 of 64 f

Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/30/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 2 2 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00295298-o7, RR#96-105 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r_g_in_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a ' 1 1 R - - - - - - - - - - -

Name Authorization N o . - - - = = - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System _ _ _ _ _Main

_ _Steam

___ System B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name*of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 1 1/2" Globe Yarway Valve Corporation 5617B-F22 NA l-MS-TD-9 NA Replacement No Yarway 3/4" Steam Trap Corporation NA NA l-MS-TD-9 NA Replacement No WFI Nuclear 1 1/2" Reducer Products, Inc. NA NA l-MS-TD-9 NA Replacement No

7. Description of Work Replace steam trap station. G~,1- ~S:.f

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-471740 (1 1/2" Globe Valve);

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CNT-533854 (3/4" Steam Trap); CNT-548859 (1 1/2" Reducer)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp ______N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. ____N:..:.:.A=------------Expiration Date ---~N=A..__ _ _ _ _ _ _ _ __

Date---.a.,"v,..,..t_q..,'(l!,...~--.l~*----, 19 f/ 2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. ~ d}>Jpected the components described in this Owner's Report during the period ~. to I ~'t){) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

,--~~~,"'t-~Sd

~r~af~

.. l'-c-.,,.~--r-~~-*--**.

____ commissions _ _ _ _ _ _V::..a:::..:.*___:8:.c8::.3=-----------

National Board, State, Province, and Endorsements Date_ _ _ __,,,,b~/_,_/...::.;i-.

I

__19 ?7

Attachment 2 Page 12 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ _5/21/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 Surry Power Station One

2. P l a n t _ - ' - - - - - - - - - - - - - - - - - - - - - - Unit--------------------

. Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00329566-0l, RR#96-112 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __,.vc....i..._rl,j.g...,inu.1....

a......P""a"'w""e...,r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.llLIO.___ _ _ _ _ __

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __

Same as above Expiration Date _ _--"N""A'-------------

Address

4. Identification of System ____R_e_s_i_d_u_a_l_H_e_a_t_R_e_m_ov_a_l_s~y_s_t_em _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5, (a) Applicable Construction Code B3 l. l 19_5_5_ Edition,_N_A_ _ _ _ _ _ Addenda, __N_-_ 1_*_N_-_7_ _ _ Code Cese (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components

/

ASME Code National Repaired, Stamped Name of Name of Manufactu re'r Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Anchor/Darling Disc, Valve Valve Company P-J799 NA l-RH-MOV-1720A NA Replacement No

7. Description of Work Gate Valve overhaul.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-~46154 (Disc, Valve)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A________________________________

Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N ~ A ~ - - - - - - - - - -

Signedl.%G~e~~e¥en"aa, £-5'~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. h~ ~ected the components described

/ q~'7J " * , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

---+a.,,,..."""'.O.

.*. "-"-~L~~+--,."'""-~~~~*--------Commissions Inspector's Signature

_______v_a_._8_8_3_--'-----------

National Board, State, Province, and Endorsements Date_ _ _ _ _ _ fl+;D-P..~7__19 <?'2

Attachment 2 Page 13 of 64 Serial No.:.97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/27/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island ~d., Surry, Va. 23883 W0#00329369-0l, RR#96-113 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i_rg_i_*n_i_a_P_o_w_e_r,.,...._ _ _ _ _ _ _ __ NA Type Code Symbol S t a W } ? - - - - - - - - - - -

Name Authorization N o . - ~ : ; : ; : - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Address Residual Heat Removal System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Coda 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Man u factu re r Serial No. No. Identification Built or Replacement or Nol Mackson 1 7/8" Studs Incorporated NA NA l-RH-MOV-1720B NA Replacement No

7. Description of Work Gate valve overhaul.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) 1 PO # BNT-467650 (1 7/8" Studs)

9. R e m a r k s - ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repJ aceroent conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- - " ' N = A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. -----"'N=A=-----------Expiration Date - - - ~ N = A = - - - - - - - - - - -

Signe/JL. .tJ e,b' .:nz::

Owner~r's Designee, Title

~~ Date 4-J.? '19 9;2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co of Hartford, Ct. have;.i~ected the components described in this Owner's Report during the period ~ to /¢~0 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

1:al.,..,. ... .,....""-+........~ - ; < - - --=-------Commissions lnspector's Signature

,F-1~* _______V-'-"a=-*a--=8'-"'8""'3=------------

National Board, State, Province, end Endorsements Date----~'~/;~~--19 7

<f'7

Attachment 2 Page 14 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 10/11/96

1. Ow ner - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre1s

2. Plant _ _Surry

_ _ _Power

_ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __ One Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#0035173B-ol, RR#96-116 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_.......v....j..._rg~in...,,...

;a...._.p""q""w,.e....

r _ _ _ _ _ _ _ _ __ Type Code Symbol S t a m P - - - ~ - - - - - - -

Name Authorization No. _ _N_A_ _ _ _ _ _ _ _ _ _ __

Same as above Expiration Date _ _.....:.;N:..:Ac...._ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System ____c_h_e_m_i_c_a_l_an_d_v_o_l_u_m_e_c_o_n_t_r_o_l_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5, (a) Applicable Construction Code B3 l.l _19~Edition,_N_A_ _ _ _ _ _ Addenda, __ N_-i_,_N_-_7___ Code Case (bl Applicable Edition of Section XI Utilized for Repairs -o; Replacements 19 89

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of

Manufacturer Board Other Year Replaced,* (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) rim Assembly (plug) Copes-Vulcan Part#13256 '"

~ ... ~

NA 1-CH-FCV-2114A NA Replaced No Part#13256

'"rim *Assembly (plug) Copes-Vulcan Ht.. #33783 :,'. NA l*CH-FCV-2114A NA Replacement No

7. Description of Work Replace trim assemmbly.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-395682

9. R e m a r k s - ' - " - - ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data*Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _ N_A________________________________

Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ____________

Signed Q ~ £1 ~--<L:-:'."

Owner~Oesignee, Title

.ZS-r Date_~Q~c=Z:~-6~'/_ _ _ _ _ _ , 19. 96 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

- - - - - - - - - - - - - - - - - - - - - - - - - ; c - - , - , - - - , , = - - - - - h a v e inJi:iected the components described in this Owner's Report during the period /0 to /01/;y'9h , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Va. 883

- - - - 1 c =.....--i,--....,--~~--------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

t ~

I nspecorsSignature National Board, State, Province, and Endorsements Date @!Ir) 19?6

Attachment 2 Page 15 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island ~d., Surry, Va. 23883 W0#00352273-01 RR#96-121 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r""g_in_1._*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stary}?---N_A_ _ _ _ _ __

Name Authorization No. _________________

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre1a

4. Identification of System _ _ _ _Charging_ _ _ _System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ __ 8 9

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired,. Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. . Identification Built or Replacement or No)

Mackson 1/2" Rod, Threaded Iricorporated NA. *NA 1-CH-P-2B NA Replacement No Mackson 1/2" Hex Nut Incorporated NA .. - NA 1-CH-P-2B NA Replacement No

7. Description of Work Replacement of Discharge Flange fastners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be. obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# BNT-467650 (1/2" Rod, Threaded and Hex Nut)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ' - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________

Certificate of Authorization No. _ _ _ _N_A___________ Expiration Date _ _ _ _N ~ A ~ - - - - - - - - - -

Signed tl. -L.. 1_ *AP :n:r

~wnero(~Designee, Title

£;4~#~ ~ -~~~t'=L~---, 19 Date _ _.........~-... f 7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of

_______H_a_r_t_f_o_r_d_,__C_t_.________---:-:-:;--r.:;,-r,::;:,-----have jnsP_e9ted the components described in this Owner's Report during the period------~+-~+-~-"-to /C:t.£~D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer

,~m;o,ao~

shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Commissions _______V_a_._8_8_3___________

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ ~b-&_/._~

I

__ 19 77 L

-~~_---::-::--=-:-:-___ ----.- ~-=--=-

Attachment 2 Page 16 of 64 Serial No.: 97-311 Docket No.: 50-280 FO_RM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/21/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _......::~--

Addre11

2. Plant _ _Surry

_ _ _Power

_ _ _ _Station _ _ _ _ _ _ _ _ _ _ _ _ __

One Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00353755-0l, RR#96-133 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_--=V-=i=r..i.q.=in""1."'*a::. . .;P;, ,;:o:. :;wc::ec=r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _N::.cAc:..__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - -

Same as. above Expiration Dete _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System ____M_a_i_*n_s_t_e_a_m_s_y_s_t_e_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1 7

5. (a) Applicable Construction Code B31

1 19-=.._ Edition,_N_A_ _ _ _ _ _. Addenda, __N_-__'_N_-____ Code Case (bl Applicable Edition of Section XI Utilized-for Repairs or Replacements 19 8 9

6. Identification of Components Repaired or Replaced end Replacement Components ASME Code N_atioilal .. Repaired, Stamped Name of Name.of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. . No. Identification .Built or Replacement or Nol Henry Vogt 2" Globe Valve Machine Co. NA. NA 1-MS-197 NA Replacement No Energy &*Proce s 2" Pipe Corporation . NA NA 1-MS-197 NA Replacement No

7. Description of Work Replace 2" cs valve. Co)/: c~

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure G;;jl' Other D Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - SSY-334458-1 (2" Globe Valve); CNT-526021 (2"

9. f;!emafk5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _......__....o...~-------

Applicable Manufacturer's Data Reports to be attached Pie CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _. . . . = N : : . : : A - = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. -----=-N:.::A-=-----------Expiration Date ----"-N"'A-=-----------

Signed /) ~ _jJ *

~ ~ ~ e s l g n e e , Title 4AL :£sf tf..vtv~t!U Date ---"~'----#-0""',"""t/~.Z..-/_____ , 19 9?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. h~ i~ected the components described

/ 9 '/~/l)D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~o~~

1,-- /7')-=-"""'"""'"---'~-+--1'-++"

~~"-"--'--------Commissions _ _ _ _ _ _ _V_a_._8_8_3___________

National Board, State, Province, and Endorsements Date_ _ _ _<-+-~-/J-_)___19 I

r>

Attachment 2 Page 17 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Address Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346881-0l, RR#97-010 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_r""g_in_1._*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a " l l i l . - - - - - - - - - - -

Name Authorization N o . - - - : : : : : - - - - - - - - - - - - -

Sarne as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _...:___ __

Address

4. Identification of System _ _ _ _Main _ _Stearn

___ System B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Mackson 3/8" Cap Screw Incorporated NA NA l-MS-182-CKVALV NA Replacement No

7. Description of Work __ R_ep_l_a_c_e_c_o_v_er_3_/_8_"_c_ap_s_c_r_e_w_s_,_s_t_u_d_s_a_nd_n_u_t_s_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT- 53 3'197

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _ _N_A ___________ Expiration Date _____N_A ___________

SigneQ ~ , < ~ /

OwnerorOr'sDesignee, Title L~ .e!-~~,i, Date~~'--ff'lil"'-~¥-l-/.....,.f---, 19 f2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

4CA~-~a=. . . "-l-~...._--+--"'-'""-'""~------Commissions _ _ _ _ _ _ _v_a_._a_a_3___________

~ Jnspecto~ National Board, State, Province, and Endorsements Date_ _ _ _~~-+-//J~2_19 fL I

Attachment 2 Page 18 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

AddreH Surry Power Station One

2. Plant _ _ _ _ _ _ _!.___ _ _ _ _ _ _ _ _ _ _ _ _ __ Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346878-0l, RR#97-011 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _V:..:i==r"'gc:i~n:::.i:::.a...;P::..;o:c.:w;.:e::.=r.___ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ __:N;.;;:A.:..___ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _Main _ _Steam _ _ _System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code _ _ _ _ _ _ _ _ 1 9 _ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19, __8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Mackson 3/8" Cap Screw Incorporated NA NA l-MS-178-CKVALV NA Replacemen1 No

7. Description of Work Replace cover 3/8" cap screws, studs and nuts.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

PO# - NT-533197 FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this . replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

,:/,j::;;"J" *:-~---;-:-;:---2,-~---,u;-~--*;....e.__

~wne~~nee,Title Expi:a:::_n_D""~-te""_""4:~.-,,_~~l~'i-"-N,.."'"A_""_-_-_-_-_-_-_-~.-,-_

CERTIFICATE OF INSERVICE INSPECTION I

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State 9

_/__

7 or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

hv ~ected the components described l'D. ~p D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

1~/7J...,._~~'-~-+--+-l}1+-',C.C~"-------Commissions _ _ _ _ _ _ _V_a_._B_S_3_ _ _ _ _ _ _ _ _ __

~'sSlgnatu7e National Board, State, Province, and Endorsements Date_ _ _ _ _ ,-+(_;.._')_19 f2

Attachment 2 Page 19 *of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ _ 5/16/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060. Sheet _____ 1 of _ _ _1 _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant _ _ _ _ _ __.;._ _ _ _ _ _ _ _ _ _ _ _ _~ - -

Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346871-01, RR#97-012 Address Repair Org&nlzatlon P.O. No., Job No., etc.

3. Work Performed by _ _v_1_*r""g,_i_n_i_a_Po_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol StamJi____N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - ' - - - - - - - - -

Same as above Expiration Oate _ _ _N_A_ _~ - - - - - - - - -

Address

4. Identification of System _ _ _ _M_a_i_n_s_t_e_a_m_s_ys_t_e_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition,~*------- Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National . Repaired, Stamped

. Name of Name of Manufacturer:* Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Mackson 3/8" Cap Screw Incorporated NA NA l-MS-176-CKVALV NA Replacement No.

7. Description of Work Replace cover 3/8" cap screws, studs and nuts.

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure 0 Other D Pressure _ _ _ _ _ psi Test Temp. ______°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa*

tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-528177

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair.or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A------------------------~-----

Certificate of Authorization No, _ _ _ _N_A ___________ Expiration Date -----=N:.::A::.:____________

Signed~~

wnero~ 14,/ ~

er~Designee, Title

~M$lll&t.f-b Date~A;_4 ___.f__,./,___1---, 19 9?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and empl~yed by HSBI and I Co, of

_______H_a_r_t_f_o_r_d__,..,_c_t_.---------,--,-,-+/-.::--;-----:-~~~pected the components described in this Owner's Report during the period-----~~.,,..,_~.......~~-to /~~~ i) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's .Report. Furthermore, neither the Inspector nor his employer shall be_ liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

i-=-/J"-t::aQ_f_.....,.~~~~--<-+~-=--------Commissions _ _ _ _ _ _ _V_a_._a_a_3_ _ _ _ _ _ _ _ _ __

~o..:s~ National Board, State, Province, and Endorsements Date_ _ _ _ ~__,I _i-~~2___19 LL

--- --- - --- -*~ - ------.-~-------- - -- -~--~---~----.--- ----

Attachment 2 Page 20 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/09/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va .. 23060 1 1

-Sheet _____ of _ _ _ _ _ _ _ _ _ _~ - - -

Addre1&

Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Sur,:y, Va. 23883 W0#00340247-0l, RR#97-072 ,I 14,e""" S' ,_ tU,I' Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_*r~g_i_n_i_a_l?o_w_e_r..,.,_ _ _ _ _ _ _ __ NA Type Code Symbol S t a r o p - - - - - - - - - - -

Name Authorization No.--:::::---~----'-------

Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __

Addre11 Reactor Coolant

4. Identification of System _ _ _ _ _ _ _' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ' - -

B3l. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME

'I ' Code Nation~I Repaired, Stamped Name of Name on:'* Manufacturer Board Other Year Replaced,- (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Allied Nut_& Bo lt l 1/8" H~~ Nuts Company, Inc. NA NA l-RC-l?CV-1455C NA Replacement No

_COl?ES NA NA l-RC-PCV-l:455C NA Replacement No 2" TRIM ASSEMBLY VULCAN, INC;

7. Description of Work New Bolting for bonnet on 1-RC-PCV-1455C; Ov~Altl#~&, :i))Jk/,!.

8. Tests Conducted: Hydrostatic I Pneumatic'O Nominal Operating Pressure D Other D Presslire ______ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# SY-392526 (1 1/8" Hex Nuts); CNT-527734 (2" Trim

9. Remarks _ _ _ _\ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached Assembly)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A______________________________

Certificate of Authorization No. ____N_A_ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _ N_A___________

S;gned ( ) _ ~ d__ * " .ZS.&" f,v6,,uc:£<~ Date____...~'--"-""""".,_~i?:=----,

( F 19 S ;2 O w n e r o ~ n e e , Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned,,holdjng ,a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

hav,: dhcted the components described in this Owner's Report during the period-----~~c.......<-+..L...""'fo::....._to /ij//7f-'2.-i> , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in.accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspecti212n. ~ Va.

---t---,,..,..~....,,....,.-...,...._"T"_,....-'~~~-----Commissions _ _ _ _ _ _ _ _ _883 _ _ _ _ _ _ _ _ _ _ __

.,npec~ National Board, State, Province, and Endorsements

Attachment 2 Page 21 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/09/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd. , Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va, 23883 wo#00299329-o5, RR#97-016 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_rg=-1-*n_i_a_P_o_w_er.....,.._ _ _ _ _ _ _ __ Type Code Symbol Stame _ _ _N_A_ _ _ _ _ _ __

Name

. Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addre11.

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __:__ _

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code _ _ _ _ _ _ _ _ 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components i

ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or Nol Consolidated

1 1/4" Nute Power Supply NA NA 1-RC-PCV-1455B NA Replacement No 1 1/4" Threaded Cardinal Rod Ind. Products NA NA 1-RC-PCV-1455B NA Replacement No

7. Description of Work Replace tr~eembly. and bonnet bolting.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# SY-188937 (1 1/4" nuts); CNT-450292

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

(1 1/4" TH. ROD) Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement

ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________

Signed C") / ~- ~Ae: ..:Z::S.Z: .,

~~--~-~-~~'-----,19~2

~ ~ ; D e s l g n e e , Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

ha#~cted the components described in this Owner's Report during the period to /~~c) , and state th11t to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, *concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of a.ny kind arising from or connected with this inspection.

Date_ _ _ ~~...--,.lj~,;L.~__19 V

Attachment 2 Page 22 of 64 Serial No.: 97*311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/18/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#o0306891-0l, RR#97-017 Address Aepalr Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir--'g"-1.-*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf----N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - , - - - - - -

Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __

Addreas

4. Identification of System _ _ _ _ Safety

___ Injection

_ _ _ _System B31.l 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Part#

Disc Anchor/Darling D13868 NA'* 1-SI-130 NA Replaced No Studs Mackson, Inc. NA NA 1-SI-130 NA Replaced No Cardinal Nuts Ind. Products NA NA 1-SI-130 NA Replaced No

7. Description of Work Replace internals.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2l informa-tion in items 1 through 6 on this report is included on each sheet, and (3l each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82l This Form (E00030l may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT539022 (disc), CNT51170j'.1 (studs),, CSY342199 (nuts)

9. Remarks ;, 7 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp ______N_A_______________________________

Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A___________

Signed(iJ~LJ ~b,: _f~:r ~W-~~~~~---LH~-----,1992 Ownero~er's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

- - - - - - - - - - - - - - - - - - - - - - - - - - r c - - . : , ; , , . - - - - - h a v7 ins~ct_ed the components described in this Owner's Report during the period lP to Lql'l~flU , and state that to the best of my knowledge and belief, the Owner has performed ,examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectio~\C?~

.~,__.,,e...._...ec.-

n~_J

_ _,_~~~-lf!--,jl<...>"-"-='--------Commissions _ _ _ _ _ _ _ Va. 883 Inspector's Signature Natlonal Board, State, Province, and Endorsements

Attachment 2 Page 23 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/18/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1

\,**. Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station One

2. P l a n t - - - - - - - - - - - - , - , - - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00328809-0l, RR#97-018 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by __v_i_*r-'g'-i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp----N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Safety

_ _ _Injection

_ _ _ _System B31.1 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part#

Disc Anchor/Darling D13868 NA 1-SI-147 NA Replaced No Studs Mackson, Inc. NA NA 1-SI-147 NA Replaced No Cardinal Nuts Ind. Products NA NA 1-SI-147 NA Replaced No

7. Description of Work Replace internals*

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2l informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82l This Form (E00030l may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT539022 (disc), CNT51170j'!(studs), CSY342199 (nuts)

9. Remarks ------------------~~&----"'.s..<.a~~-----------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair o~ replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __

SigneW L~ e-k ;rrz Owner or Ovinefis Deslgnee, Title Virginia

,,J,111E ~

Date---==----<C.....-'J.-------,

CERTIFICATE OF INSERVICE INSPECTION 92 19 __,.'---i,~-

I, the undersigned,.holdjng ;J valid commission issued by the National Board of_B_oiler and dPreuure Vessel Inspectors and the State HSBI an 1 Co.

or Province of and employed by of Hartford, Ct.

~;~l~~~d the components described in this Owner's Report during the period to /~P"I l) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

./. 7/Jt

Va. 883

~_,&-'.....,,..,,4,-__,_,----J'--#'->f<'-1,1"'4"""'~----Commissions ____________________'--_

nspectOr'sSfgn~ ~ National Board, State, Province, and Endorsements Date_ _ _{o-+-"'!rJc......,_J=---_19 I

<r7

Attachment 2 Page 24 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/30/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo353102-01, RR#97-021 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by Virginia Power Type Code Symbol StawR---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - ~ - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11 Main Steam System

4. Identification of System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 8 9 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME

, Code National Repaired, Stamped Name of Name of ' Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No .. Identification Built or Replacement or.Nol Fisher Control, Stem & Plug International NA NA 1-MS-PCV-102B NA Replacement No

7. Description of Work Replace trim with Class III Shut-off trim.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form IE00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-544970 (Stem/Plug)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - : - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _. . . : N : . . : : A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. ----==-A=------------Expiration Date _ _ _ _N=A=-------------

. Signed~~~ -~- / :fSZ:~4~-'4 Date _ ........,._I____, 19 P)

__..,~->J_,,t-:

O w ~ e s i g n e e , Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I

Co. of

______._H_a_r_t_f_o_r_d_:,__ C_t_._________---:r--,-+...--.----h~e J'!spected the components described in this Owner's Report during the period _ _ _ _ _ _L.Lq.,c:,£µ:.....!:b~_to /Q/1~0 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with_ the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

______a_ . . ._O

...,;i....J'L..~-'--,-'-4"~"""------Commissions _______v.:...:;ac.:...__::8__8:..3;::__ _ _ _ _ _ _ _ _ __

-lrlspector'sSignature National Board,.State, Province, and Endorsements Date_ _ _____,0=!'/!t'-'--=-~--'---19 I

'.77

Attachment 2 Page 25 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ _5/21/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _ _ 1 _ _ of _ _ _1 _ _ _ _ _ _ _ _ _ __

Addre11

2. Plant _ _Surry

_ _ _Power

____ Station One Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00353100-01, RR#97-022 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_.......,_v-=-ir:,;g""1"'*n"'iesa,...,a;P.,eo::,.w""er,a__ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _""'N"-'A'---------

Name NA Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _M_a_in_s_t_e_a_m_sy_s_t_e_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code B31

1 19_5_5_ Edition,_N_A_ _ _ _ _ _ Addenda, __N_-_ 1 _'_N_-_7___ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components I

ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

>,., '> "0 /l C961202-1 NA 1-MS-PCV-102A NA Replacement No 3" Valve Fisher Control

7. Description of Work Replace Trim with Class VI shut-'off trim.

8, Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-533186-1 (3" Valve)

9. R e m a r k s - * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and th is replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _......c_ _ _ N_A_______________________________

e Certificate of Authorization No. NA Expiration Date _ _ _ _Nc..cc.A=-----------

Signed G)Owner or~Designee,

_jl_ J/ r,c;z:.- 6~A/ff~

Title Date---.L~.......,,..,,_,,.f'--l...,,,_1 _ _ _ _, 19 I}

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

haV/ ~ected the components described Ii); '/l 'tJ{) ,

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

- - -..02=-"-=C....,..-"'~=-~,-,-,.-"--'-~-*

_*__________ Commissions _ _ _ _ _ _ _V_a_._8_8_3_-'-----------

1nspector's Signature National Board, State, Province, and Endorsements Date_ __,if<-cf2_7_ _ _ _19 C/

Attachment 2 Page 26 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPO.RT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. . 5/16/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd:, Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Address

.Surry Power Station One

2. P l a n t - - - - - - - - - - ~ . , . . . - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00346645-0l, RR#97-024 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _'v_i_r..:g_i_n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Sta~____N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - -

Same as above

Expiration Date~_ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _Reactor ____ Coolant

_ _ _System B31.1 55 NA N-1, N-7

. 5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Niime of Manufacturer

Board

Other. Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Eiuilt or Replacement or No) 1" Rod Mackson Threaded Incorporated NA NA 1-RC-SV-1551A NA Replacement No 1 3/8" Rod Mackson Threaded Incorpor~ted NA NA l-RC-SV-l551A NA Replacement No

.1

7. Description of Work Remove, test," repair as reg. and reinstall.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is 8% in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on eech sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/821 This Form (E00030I may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-467650 (l" Rod, Threaded) ; NT-467650 (1 3/8 '~

9. Remarks _ _ _ _ _~ . . . . , . . . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached Rod Threaded CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement - conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

____ N_A_ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _.c..N:c.A.;;.__ _ _ _ _ _ _ __

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

~e spected the components described 0

IO.; '/ Y. 0 l> . , and state

. that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Ownf!r's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

,<- /'//_........,ti~c:--1*-~-,c..+

. -l<-'~-------Commissions _______V_a_.__8_8_3___________

b-"L~tor's Signature National Board, State, Province, and Endorsements Date,_ _ _ _ _'J.-+-/....:c'J--_7,___19 9z

Attachment 2 Page 27 of 64 serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre11 Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit--------------------

N11me

_5570 Hog Island Rd., Surry, Va. 23883 W0#00346646-0l, RR#97-025 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r-=g_i_n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Sta"m. ____N_A_ _ _ _ _ __

Name Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ __

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _Reactor

____ Coolant

_ _ _System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 8

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 1" Rod Mackson Threaded Incorporated NA NA 1-RC-SV-1551B NA Replacement No 1 3/8" Rod Mackson Threaded Incorporated NA NA 1-RC-SV-1551B NA Replacement No 1" Heavy Mackson -

Hex Nut Incorporated NA NA l-RC-SV-1551B NA Replacemen1 No

7. Description of Work _ Remove,

_ _ _ _test,___ repair

___ as_req.

_ _ and

_ _reinstall.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) eech sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-467650 (1 11 Rod, Threaded); NT-467650 (1 3/8"

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - -

Applicable Manufacturer's Data Reports to be attached Rod, Threaded; NT-467650 (l" Heavy Hex Nut)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _ _ N_A__________ Expiration Date _ _ _ _N_A__________

Signed()* / / -e,d,.,

O w ~ Deslgnee, Title

.ZS'Z: ~<< "ll"'-,j../E,...L/.c£,~----, 19 Date .....~"'--"'. P?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

- - - - - - - - - - - - - - - - - - - - - - - : : - : . r - ~ = - = - - - - - h ~ v p :=ected the components described in this Owner's Report during the period------~-+-~'f-'--b__ to /i)(I~ () , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

ao~ Va.883

+--:;J._.-.~~'----,.-,.....~'--'"~----Commissions _ _ _ _ _ _ _ _ _----,---,------,--,::------

j;spactor's ~ National Board, State, Province, and Endorsements Date_ _ _ _~'-'-l.._3..L2_ _19 V

Attachment 2 Page 28 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addresa Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346647-0l, RR#97-026 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_*r...:g:...i_n_i_a_Po_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stam&,.____N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _Reactor ____ Coolant

_ _ _System B31.l 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol 1" Rod Mackson Threaded Incorporated NA NA l-RC-SV-1551C NA Replacement No 1 3/8" Rod Mackson Threaded Incorporated NA NA l-RC-SV-1551C NA Replacement No

7. Description of Work _Remove,

_ _ _ _test, ___ repair

___ as_req.

_ _ and

_ _reinstall.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-467650 (1" Rod, Threaded); NT-467650 (1 3/8"

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached Rod, Threaded

. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement

conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _ _ N_A__________ Expiration Date _ _ _ _N_A__________

Signe~... V~-~-

~ n e ~ S J Q n e e , Title

.:Z:.S::z:: Date_..i~-=~-'l-#<-/-.,.f'-----, 19 S'?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

have in~cted the compone.nts described in this Owner's Report during the period to Lojl'4PD , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.*

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or *a loss of any kind arising from or connected with this inspection.

~-~~

~~--_-,.--,.,_ _,_-+.,__.""~"""'-=-:;_----Commissions _ _ _ _ _ _ _

~ n;;;;;;ior'signaure Va.

_ _ 883 National Board, State, Province, and Endorsements Date_ _ _ _ _ _ _ ,--1/~;i-~7__ 'CZ 19

Attachment *2 Page 29 of 64 Serial No.: 97-311 Docket No.: 50-280

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/2/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _.;..

Addr1111 Surry Power Station one

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346920-11, RR#97-031 Addres1 Repair Organization P.O. No,., Job No., etc.

NA

3. Work Performed by __v_i_*r_g_i_n_i_a_P_ow_e_r-:-:---------- Type Code Symbol S t a ' N ' R - - - - - - - - - - -

Name Authorization N o . - - - , , : : : - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addre11 Feedwater System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Coda Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME

,. Code

,, ., National Repaired, Stamped Name of Name of Manufacturer* Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Tioga Pipe 14" Pipe Supply Co,. Inc NA NA VARIOUS NA Replacement No Tioga Pipe 14" Pipe Supply Co. Inc .. NA NA VARIOUS NA Replacement No Radnor.

14" Elbow Alloys, Inc. NA NA VARIOUS NA Replacement No 7 . Description of Work Replace lcFW~PP5D-10 and 1-FW-~PSF2-103. ~).I ~t!- ,'(/.*4,'/6-/ A?),,>,1.,L$'.

8; Tests Conducted: Hydrostatic I

Pneumatic D

Nominal Operating Pressure [!?"

Other D Pressure psi Test Temp. *F NOTE: Supplemental sheets .in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-519174 (14" Pipe); CNT-540713 (14" Pipe);.

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CSY-304077 (14" Elbow)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. ____N_A _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _N_A _ _ _ _ _ _ _ _ _ __

SigneQ.. i::~ IS£ Owner orner'sDesignee, Title 4"°4,<<<a ... Date _ _..,L_,,.,.,..,,.,.....,E~....,J-1_ _ _ _ _ , 19 92 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

hpV'!.)1}8Pected the components described in this Owner's Report during the period _ _ _ _ _--1..-.::;.;e..:......:..,r--:-_.:;._ _ to I°.!£ 7i-D O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in.accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

+-.

uu/7/,.......Q,...__,c 6 ____.'""VYZ lnspeMslin~

__~ .. -

--~---commissions _ _ _ _ _V_a_._8_8_3_ _ _ _ _ _ __

National Board, State, Province, and Endorsements

- --- - --~--*-- --- ; ---- ---------"

Attachment 2 Page 30 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/2/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346920-12, RR#97-032 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by __v_i_*r_g_i_n_i_a_Po_w_e_r....,..,._ _ _ _ _ _ _ __ NA Type Code Symbol S t a ~ - - - - - - - - - - -

Name Authorization N o . - - - - : , = - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _....,._ _ _ _ _ _ _ _ __

Addra11 Feedwater System

4. Identification of System _ _ _ _ _ _ _. . . , . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda,----'----Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ _ _

. 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer" Serial No. No, Identification Built or Replacement or No)

Radnor 14" Elbow Alloys, Inc. NA NA l-FW-PSF2-102 NA Replacement No I

7. Description of Work Replace 1-FW-PSF2-102. C'c,b,f &s.e:. Al-fi6-/4;4'k.J. ~ .

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure ~

Other O Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E:00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

'. .PO# CSY-304077 (14" Elbow)

9. Renia~ks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

____N_A___________ Expiration Date _____N_A___________

Signed:!,,E::16£.~"-'~-?!~~~~=~""-ld~-&~V.d.~~:::::,._ Date _ - .............f ______, 19 9:)

_,4\,,_/_p._....:~~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

~~pected the components described

/(f ~ 't>O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither.the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

---~,<-, ,,/l

__ /7>+-4<-~-*

~*'--,'F-i~"-""...~ * ~ - *_ *_ _ _ _ Commissions:...*--'------V_a_._8_8_3___________

6,,'~e~ National Board, State, Province, and Endorsements Date

=-/µ'--/~---b /p 19 P2

Attachment 2 Page 31 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/30/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00353870-0l, RR#97-033 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g_i_*n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol StaryR---N_A_ _ _ _ _ __

Name Authorization N o . - - - : : : - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addresa

4. Identification of System _ _ _ _ Charging

____ System 831.1 55 NA N-1, N-7

s. (al* Applicable Construction Code _ _ _ _ _ _ _ _ 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Cesa 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired,. Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No, No. Identification Built or Replacement or No)

Energy & Proce~s 2" Pipe Corporation NA NA VARIOUS NA Replacement No Consolidated 2" Elbow Power Supply NA NA VARIOUS NA Replacement No Dubose Nationa 2" Tee Energy Srvc, I c. NA NA VARIOUS NA Replacement No Consolidated 2" Flange Power Supply NA NA VARIOUS NA Replacement No

7. Description of Work Replace letdown piping. Cle ~s.? Al - ,Y//,, /-~.f'

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure w' Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may ba used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

__J

FORM NIS-2 (Back)

PO# CNT-542234 (2" Pipe); CNT-540787 (2" Elbow)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to ba attached CNT-540345 (2" Tee) CNT-542135 (2" Flange)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _.=Nc.::A=-=.. _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _N_A _ _ _ _ _ _ _ _ _ __

Signet;;)_~ j/ * , 'Zr£ b/4,.rr#~ ,19 ?7 O w n e r ~ g n e e , Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. _hjve )9.!Pected the components described in this Owner's Report during the period to lq~~l) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordanc_e with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

+~~--~--~~-'-'"-~~~-~--

In s p e c t o ~ ~

-*-* __.__ commissions Va. 8 83 National Board, State, Province, end Endorsements Date_ _ _ _ =-fo-+-/--+-9__19- 9°7 I '

J

Attachment 2 Page 32 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/21/97

1. O w n e r - - - - - - - - - - - , - , - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreaa Surry Power Station One

2. Plant Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00353870-02, RR#97-034 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _.....,,V,.,.i.e.rg,,....in ia"---'P"-'o"-'w"-'e"'r-.---------- Type Code Symbol Stamp _ _ _:,NA,:e.__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _c_h_a_r.::g_i_n;:;.g_S....;y:..s_t_e_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

33 1. l 1 7

5. (al Applicable Construction Code 1 9 ~ Edition,_N_A_ _ _ _ _ _ Addenda, __N_-__'_N_-____ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Consolidated 3" Angle Power Supply NA NA VARIOUS NA Replacement No Dubose Nationa 1/4" Tubing Energy Srvc, Ir c. NA NA VARIOUS NA Replacement No Dubose 3/4" Plate Steel, Inc. NA NA VARIOUS NA Replacement No Energy & Proce s 1/2" Plate Steel Corporation NA NA VARIOUS NA Replacement No Consolidated 3" Tubing Power Supply NA NA VARIOUS NA Replacement No

7. Description of Work Modify-Fabricate-Install supports on Letdown Piping

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other D Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - CNT-465913 (3" Angle); CNT-514921 (1/4" Tubing);

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CSY-318000 (3 /4 11 Plate) CNT-505207 (1/2" Plate Steel) ;

SSY-381663 (3 11 Tubing)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this rel') aceroeot conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp, _ _ _ _ _- ' N " ' A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. _ _ _...,N,.,_A=-=-----------Expiration Date _ _ ___,N=A,___ _ _ _ _ _ _ __

Sig~edQ / Lol'A/ JfZ: &,4,.uU-,e_

bvii~~r's "i:fesienee, Title Date---~-*-"""""'Jl"--"2,/""'-_ _ _ _ , 19 r

V CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. '0~spected the components described

/Q )"'

~

t?o . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of .the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

+//._.-Q/.,.....__-_.~c...;,_-"'-"""'-'-------Commissions _ _ _ _ _ _..;V:.:a::.;.*__::8cc8:c.;:c3___________

~r*~ National Board, State, Province, and Endorsements

Attachment 2 Page 33 of 64 Ser;aL No.: 97-311 Docket No.: 50-280

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Virginia Electric and Power Co.

As Required by the Provisions of the ASME Code Section XI 5000 Dominion Blvd., Glen Allen, Va. 23060 Name 5/27/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00353870-05, RR#97-035 Address Repair Organlz11tlon P.O. No., Job No,, etc.

3. Work Performed by_....;..v.;:.ir.;:.g~i:.:*n.::i:..:a....;..P.;:.o.;:.we.;:.r;:__ _ _ _ _ _ _ __ Type Code Symbol Sta'lJf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Charging

____ System B31.1 55 NA N-1, N-7 5 .. (a) Applicable Construction Coda 19 ___ Edition, _ _ _ _ _ _ _ Addanda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9 __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code

.. National Repaired, Stamped Name of Name of* Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. . No. Identification Built or Replacement or No)

John H.

2" Pipe Frischkorn, Inc. NA NA 1-CH-RO-lORLDl NA Replacement No Astro Nuclear/

Letdown Orifice Dynamics Inc. NA NA 1-CH-RO-lORLKDl NA Replacement No

7. Description of Work Replace 2" orifice and piping.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-543809 (Letdown Orifice); CSY-310739 (2" Pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- = . N : : . A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. ----=-N:.:A.:.....-'----------Expiration Date _ _ _ _:cN:.:A-=-*~----------

Signe /1 ~ ,£_ ~ TitleJS£

~r¥ro~ee, Date _ -G:.___,,f<'-9_ _ _ _ , 19

_,~"""'"'-.""... 2?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. h pvected the components described

/0.~~0 VD ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

---~c::?D~..,*::...c-==-

.._,_t_~-+-~-F---<L

lnspe~

_ _ _ _ _ _ _ Commissions _ _ _ _ _ __:.V..cacc.c..___,8'-8=-=3_ _ _ _ _ _ _ _ _ __

A~c:."':;__

National Board, State, Province, and Endorsements Date_ _ _b--+-/--'-/'-(____19 7Z

Attachment 2 Page 34 of 64 Serial No.: 97-311 Docket No.: 50-280

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 5/30/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addr'!H Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00353870-06, RR#97-036 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_*r_g_i_n_i_a_P_ow_e_r....,..,._ _ _ _ _ _ _ __ NA Type Code Symbol S t a W R - - - - - - - - - - -

Name Authorization N o . - - . , . = - - - - - - - - - - - - -

Same as above NA Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ _ __

Addre111 Charging System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 _ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

John H.

2" Pipe Frischkorn, Inc. NA NA l-CH-R0-10RLD3 NA Replacement No

~

Astro Nuclear/

Letdown Orifice Dynamics Inc. NA NA l-CH-R0-10RLD3 NA Replacement No

7. Description of Work Replace 2" orifice and piping. D 8, Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in,, (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

PO# CNT-543809 (Letdown Orifice); CSY-310739 (2 11 Pipe)

FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________

Certificate of Authorization No. ____ N_A___________ Expiration Date _ _ _ _N_A___________

Signed Q~ / ,A -*V fl$'. .&"'Mi,.,d-~~

OwKr;;r~signee, Title Date-~J;_~~==----,.F-9_ _ _ _ , 19 f 2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct* h-:':~Ded the components described in this Owner's Report during the period ~ to It?~ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

- - - ~ -/h__,,,.'""'"Q.-""'=_*-~-P--4L/-<-JC-""""-;r....~"",-"'-""---'

..'--___ Commissions _ _ _ _ _~_V_a_._8_8_3___________

&l~~o~attJn( National Board, State, Province, and Endorsements Date ~1(/ I I I 19 v

Attachment 2 Page 35 of 64 Serial No.: 97-311 Docket No.: 50-280

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 5/27/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00353870-07, RR#97-037 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_ir-'g=-1.-*n_i_a_P_o_w_er.....,.,_ _ _ _ _ _ _ __ Type Code Symbol Staw.R _ _ _N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11,

4. Identification of System _ _ _ _ Charging

____ System B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda,..,________ Code Casa 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components I

ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built, or Replacement or No)

John H.

2" Pipe Frischkorn, Inc. NA NA l-CH-R0-10RLD2 NA Replacement No Astro Nuclear/

Letdown Orifice Dynamics Inc. NA NA l-CH-R0-10Rr.:/n2 NA Replacement No

))~..,. r,,fo ,n

/

7. Description of Work Replace 2" orifice and piping.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure ~

Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-543809 (Letdown Orifice); CSY-310739 (2" Pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N = - = A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. _ _ _~N==A=-__________ Expiration Date _ _ ____,N=A=------------

s;goe~,~~""~£ ~.g'., Da t e - ;/Mt,,,£ _9

~ ~ ~ - ~ - - - ~ - - - - , 19 p ;,

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

. or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct,. hav,k il)~C~ the components described ID Y"(/0 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

f-a~""'--+-\Q,-6 . ._

Inspector's Signature

~

_ _ __ _ _ _ commissions _______v_a_.__8_8_3____________

_._,_~.L--jL-*

National Board, State, Province, and Endorsements Date. _ _ _ _ _ (p_/_l _/_19 f2

Attachment 2 Page 36 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 4/28/97

1. O w n e r - - - - - - - - - - . , . . . , - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. P l a n t - - - - - - - - - - - - , - , - - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#00329195-0l, RR#97-038 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_*r~g,_i_n_i_a_Po_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp ____ NA Name NA Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date ___N_A _ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Charging B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Cap screws NA NA NA 1-CH-FL-4B NA Replaced No Ht. # 1069::

Cap screws Mackson, Inc. Tr. # A21 NA 1-CH-FL-4B NA Replacement No

7. Description of Work Replace cap screws*

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 L

CNT-545695 FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________

NA NA Certif~icateof A~utho,rization No. " Expiration Date Signe~~

wne or Ow

..2"$'.:Z:£.N41,~ Date--4~~~'""'"""~""-"'-'2.""""'r.___,19 f2 r's Oeslgnee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

. of Virginia or Province and employed by HSBI and I Co

of Hartford, Ct.

~ e c t e d the components described in this Owner's Report during the period b to /a~ - f?O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection~ \ ~ j .. .L.4.... Va.

883

---~~-~--,------,.--,,.....,,.~~-~-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

- Inspector'~~ National Board, State, Province, and Endorsements Date--0-=-3_i)_ 1 9 ??

1 Attachment 2 Page 37 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME- Code Section XI Virginia Electric and Power Co. 5/16/97

1. Own.er Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Address Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. "23883 W0#00345549-0l, RR#97-048 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r..:g_i~n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Starw,____N_A_ _ _ _ _ __

Name Authorization No. ____ * -----------

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address Charging System

4. Identification of System _ _ _ _ _ _ _ _~ - - ~ - - - - - - - : - - - - - - - - - - - - ~ - , - - - - - - ' - - - -

B31.1 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition,--------'* Addenda, _ _....:,.._ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19, __8_9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of ' Manufacturer Board Other

Year Replaced, (Yes Component Manufacturer Ser.ial No. No. Identification Built or Replacement or No)

BW/IP Bolt & Nut International, ~nc NA NA 1-CH-P-lB NA Replacement No I

1 1/8" Heavy_ Mackson Hex Nut Incorporated ._*, NA NA 1-CH-P-lB NA Replacement No Mackson Rod, Threaded Incorporated NA NA f-CH-P-lB NA Replacemen No BW/IP Nut, Coupling International, IncNA NA 1-CH-P-lB NA Replacemen No Replace bolting on pump casing.

7. Description of W o r k * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - . . . : . . . ._ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressu~e _ _ _ _ _ psi Test Temp.

I

°F NOTE: Supplemental sheets in form of lists, sketches; or drawings may be used; provided (1) size is SY. in. x 11 in., (2) *Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numl:iered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - SY-311337 (Bolt & Nut); NT-467650 (1 1/8" Heavy

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached Hex Nut); NT-521709 (Rod, Threaded); SY-184755/ (Hex Machine Screw Nut)

CERTIFICATE OF COMPLIANCE We certif.y. that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ________________________________

Certificate of Authorization No. _ _ _ _ N_A__________ Expiration Date _ _ _ _N = A ~ - - - - - - - - -

Date _ _.~.__,.,,..;i4'....,')11<-"....,1Y!joc-.- - - , 19 9_ 2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hart-ford, Ct.

hw~~ted the components described Ii / ~ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section.XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations -~nd corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_ _ _ ___,,'--/7)""=_.""'""-'-~~_,_.,_~-------Commissions _______V_a_.__ 8_8_3___________

~t~ National Board, State, Province, and Endorsements Date*----~~-+J~~--2 l

_ _ _19 LL

- --- - ~- ---- ---~

Attachment 2 Page 38 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/21/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

AddreH Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00326418-05, RR#97-054 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r.:cg_in_1_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Sta'DR---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Reactor

____ Coolant

_ _ _System B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Consolidated 4" Steel Block Power Supply NA NA 1-RC-P-lA NA Replacement No

7. Description of Work Weld jacking blocks on pump 'flange.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

PO# - NT-548147 FORM NIS-2 (Back)

(4" Steel Block)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A________________________________

Certificate of Authorization No. _ _ _ _ N_A___________ Expiration Date ----=-N:.:A-=------------

Signed {JJ~~~~4/

Ow <l rs IS'-Z:

Designee, Title

~rv~ Date_...:.~____:;,o,:::~oc:..,v,..__J!./~----, 19 9i CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co, of

_______H_a_r_t_f_o_r_d_,_c_t_*-------------,~:-1-:::c------ha,ve _i_~spected the components described in this Owner's Report during the period to IOj/'/IPD , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owne*r*s Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~.o-~,!A,

---~~-=----~~~..s....-+-+--=-~--------Commissions _______V_a_._8_8_3_ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date*-----~~+l~:J~2~_ _19 7

V

Attachment 2 Page 39 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 4/16/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Address Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00361900-01, RR#97-059 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _ v_ir_g;;..1_*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Address Reactor Coolant System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part#

rim Assembly (plug) Copes-Vulcan 131428 NA 1-RC-PCV-1455A NA Replaced No Part#

rim Assembly (plug) Copes-Vulcan 131428 NA 1-RC-PCV-1455A NA Replacement No

,/'

7. Description of Work Replace trim assembly.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY:, in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-512166 1 9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. NA Expiration Date _ _ _ _N_A___________

Signed~,?

~ e r or Owner'~nee, Title liC: L ~ # ~ Date _ _ Aj4_,_,__~,,e-~*___,,_J_fz~---, 19 9 2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne$1,,.holdjng ii valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of virginia and employed by HSBI and I Co. of Hartford, Ct.

have i~pe~J,lld the components described in this Owner's Report during the period b to /Oj,('(Lt?O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

883

+~-=""""'"""""-'-~c.r-,'--1'~* ~~------Commissions _______v_a_.___ _ _ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date._ _ __._,~f---'-/;~~~19 97

Att.achment 2 Page 40 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreu Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 WO#D0361814-0l RR#97-060 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_*r..:g:...i_n_i_a_P_ow_e_r..,..,._ _ _ _ _ _ _ __ NA Type Code Symbol S t a W f > - - - - - - - - - - -

Name Authorization N o . - - - - - - - - - - - - - - - -

Sarne as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Address Feedwater System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B3l. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Coda National Repaired, Stamped Name of Name of - Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Dubose Nationa Hanger 5 8 II Pipe Energy Srvc, Ir c. NA NA 14"-FW-13-601 NA Replacement No Dubose Hanger 5 3/4" Plate Steel, Inc. NA NA 14"-FW-13-601 NA Replacement No l/2" Plate Dubose Nationa Hanger 5 9 1/2 11 X 9 l/2 11 Energy Srvc, I c. NA NA 14"-FW-13-601 NA Replacement No 1/2 11 Plate Dubose Nationa Hanger 5 8" X 10" Energy Srvc, I c. NA NA 14"-FW-13-601 NA Replacement No

7. Description of Work Fabricate snubber support per DCP 93-048.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-516728 (8" Pipe); CSY-318000 (3/4" Plate)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CNT-538662 (1/2 11 Plate - 9 1/2" x 9 1/2 11 /8 11 x 10")

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repl aceroeot conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _. . . : N : . . : : A = - = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. NA Expiration Date _ _ __,N=-=A,...__________

Signed (1 L d ~/ . T f.. r 4fuuiu.

Owner o ~ s l g n e e , Title" Date ~ '

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of

_______H_a_r_t_f_o_r_d_,__C_t_.- - - - - - - - - - 7 c - - - ~ - - - h a y ~ !~ted the components described in this Owner's Report during the period to ICj!/17'? , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

____._aQ_ __ -inspe~tu~

~~~*~~+--*'-+ -~ -r,A.~~~------Commissions _______V:..a::.:..:.*__;8=-8=--=3____,----------

National Board, State, Province, and Endorsements Date_ _ _ _ _ i>_,_,b~/_tz._

_ _19'17

_J

Attachment 2 Page 41 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/2/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346920-16, RR#97-061 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir....:g:'...i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ NA T ype Code Symbol S t a f f i { > -----------

Name Authorization N o . - - : : : : - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

AddreH

4. Identification of System _ _ _ _ Feedwater

_ _ _ _System_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National. Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Tioga Pipe 14" Pipe Supply Co. Inc NA NA l-FW-PP-14.00 NA Replacement No John H.

14" Elbow Frischkorn NA NA l-FW-PP-14.00 NA Replacement No

7. Description of Work Replace 14" elbow (1-FW-PSF2-63, 62 and PPSD-13).

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0 Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists,,sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-519174 (14" Pipe); CSY-193805 (14 11 Elbow)

9. R e m a r k ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repJ aceroeot conforms to the rules of the ASME Cod,e,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _~ N = A - = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. ---~N=A-=-----------Expiration Date - - - ~ N ~ A ~ - - - - - - - - - -

Signed Q £ ~ :. .-

Owner o ~ s l g n e e , Title I

'Z$, Z:: ~4,,,,,,,F,,f-4 ,..,J_.,~M~.f......1~-----, 19 97 Date_.....

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of

_______H_a_r_t_f_o_r_d~,'---C_t_.-----------,'-----z~7'"""----:h,ve. i_i2spected the components described in this Owner's Report during the period to /l}#fff?D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the

_examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~

~ s Signature

- ~ Commissions _ _ _ _ _ _V~a~*-8~8~3__________

National Board, State, Province, and Endorsements Date_ _ _ _ b_/;,__;?_19 ??

/

Attachment 2 Page 42 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Address Surry Power Station One

2. Plant Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00346920-14 RR#97-062 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r_g_i_n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a , n J ? - - - - - - - - - - -

Name Authorization N o . - - . , , ~ - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

AddreH Feedwater System

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Radnor l-FW-PP-14. 00 14" Pipe, Elbow Alloys, Inc. NA NA 14"-WFPD-9-601 NA Replacement No

?. Description of Work Replace 14" elbow on line 14"-WFPD-9-601. (1,1>~ G.,~ Q-,t/"-f ,lf/)/~t.!:I

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. _ _ _ _ _ _° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CSY-304077 (14" Pipe, Elbow)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A________________________________

Certificate of Authorization No, ____N_A___________ Expiration Date _ _ _ _N_A___________

Signed '1. ~J - - ZJ~,~r,(,0~

O w n e r o r ~ e e , Title Date _

CERTIFICATE OF INSERVICE INSPECTION

__..s7;'-"""~-----.9-----, 19 92 I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

+a2--=-""""*'t--~54.J1--,,,__-I'-~..,'.6~~~""~------Commissions

-~-

rnspector's Signature

_______V_a_._8_8_3_ _ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date_ _ _ _ _b_,_P~'/_i9-. ___19 '1?

Attachment 2 Page 43 of 64 Serial No.: 97*311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/2/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00346920-08, RR#97-063 Addren1 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_rg_i_*n_i_a_P_o_w_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a ' i l i W - - - - - - - - - - -

Name Authorization N o . - - - : = - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addre111

4. Identification of System _ _ _ _ Feedwater

_ _ _ _System B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Coda 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Tioga Pipe 14" Pipe Supply Co. Inc NA NA l-FW-PP-14.00 NA Replacement No Radnor 14" Elbow Alloys, Inc. NA NA l-FW-PP-14.00 NA Replacement No

7. Description of Work Replace 14" elbow (l-FW-PSF2-80). Cot-

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure g' Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

/

FORM NIS-2 (Back)

PO# CNT-519174 (14" Pipe); CSY-304077 (14" Elbow)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No,-,-___N=A"------------Expiration Date _ _ _ _N=A~*-----------

SignedQ ~ _./! -

0wneror~gnee, Title

-4b f.fr 4- Date _ _ ,¥<J,._.,..,,_~,..___,_.1~----, 19 .f'2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co, of Hartford, Ct. :h,v~pected the components described in this Owner's Report during the period ~ to t"c?&!~J) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, *concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_____,,{2(2'""""-==""""-'"'"*-'ri:n__.'--* "'--"------Commissions _______

"""-*+-...~"'""'"'""", v_a-'-._8_8--'-3____________

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _G,'------i,_f<<_0~7'~*--19 1

72

Attachment 2 Page 44 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 4/16/97

1. O w n e r - - - - - - - - - - - , - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _____ 1 of _ _ _1 _ _ _ _ _ _ _ _ _ __

Addra11 Surry Power Station One

2. P l a n t - - - - - - - - - - . . , . . , . . - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23BB3 W0#00359546-03, RR#97-0B0 Address . Repair Organization P.O. No., Job No., etc.

3. Work Performed by_~v=ir=a=1=*n=i=a~P=o=w=er=-,-,--------- Type Code Symbol StamP--~"""'--------

Name NA Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System ____c_h_a_r_g_i_n_g_s_y_s_t_e_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code 33 1. 1 19_5_5 _Ed.ition,_N_A_ _ _ _ _ _. Addenda, __N_-_ 1 _'_N_-_7_ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 B9

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer ' . Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA. NA NA 1-CH-HCV-1200A NA Repaired No

7. Description of Work Weld repair indications on valve inlet.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. _ _ _ _ _ _°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form .(E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N,Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

None

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the repair or replacement

ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A______________________________

Certificate of Authorization No,,..._ _'"_t_rA___________ Expiration Date ____N_A___________

SIQa,4~,,~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,.,,holdjng 13 valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State

. v irginia , HSBI and I Co.

or Province of

and employed by of

Hartford, Ct.

hav 7 ins9ected the components described in this Owner's Report during the period to /0/(e;,:'/tJD l

, and state that to the best of my knowledge and belief, _the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage o*r a loss of any kind arising from or connected with this inspection.

_____,,_ecQ~.,,,,._,.,,~=---'-'-~~-'--"* '--"C-'.=--=c.__ _ _ Commissions _______V_a_.__B_B_3_ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date*----~-/i~/~'%'~19 V

Attachment 2 Page 45 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/21/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

Address Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

One Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00331691-01, RR#97-081 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_.......:V.=i.::.r....

gc:;in:.:;i::.:*a=-=Pc..:oc::w-=e.::.r_ _ _ _ _ _ _ _ __ Type Code Symbol StarrJf---:.cNA:..::..__ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre1&

4. Identification of System _ _ _ _c_ha_r_g_i_n_g_s_y_st_e_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

83 1 1 7

5. (al Applicable Construction Code 1. 19~Edition,_N_A_ _ _ _ _ _ Addenda, __N_-__'_N_-____ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired,

Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Mackson 7/16" Hex Nut Incorporated NA NA l-CH-198 NA Replacement No Mackson 7/16" Stud Incorporated NA NA l-CH-198 NA Replacement No J,, ** ,

Valve t ,,~-,-

ITT Industries 581552-1-1 NA l-CH-198 NA Replacement No

7. Description of Work Replace valve bonnet.

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ _ psi Test Temp, _ _ _ _ _ _°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - NT-520870 (7/16" Hex Nuti; NT-522737 (7/16" stud);.

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - , - - - - - - - -

Applicable Manufacturer's Data Reports to be attached NT-526992-1 (Valve)

,/

I

/

I

/

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- - = . N c c A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. _ _ _~N~A~----------Expiration Date _ _ _~ N = A ~ - - - - - - - - - -

Signed ( ) ~ " ' ~ . r _,CS':f: 9?

, 19~~.'---

Owner or Ownei(.Joe7iiiriee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of

_______H_a_r_t_f_o_r_d~,_C_t_._________~---,--+:=--=-----hav; injPected the components described in this Owner's Report during the period to lljll4f'{!O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectio~o~

---<~1--c,,.c..-,,,..-~~-"'--,-...--='-"'---------Commissions _ _ _ _ _ _ _V_a_._8_8_3___________

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ ')~--t--/c~;;._____

1

,7 19 ?'7

Attachment Z Page 46 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 4/03/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 2.' Plant _ Surry

_ _ _ _Power

____ Station

_ _ _ _ _ _ _ _ _ _ _ __ Unit _ One Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00350675-03, RR#97-083 Address Repair Organization P.O. No., Job No., etc.

3.- Work Performed by _ __,_v""i.,,,rg.._1.=*n=1.=*a~P=o=w=e=-r.,..,-_ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.,,N,aA.___ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addreaa

4. Identification of System ____F_e_e_d_w_a_t_e_r_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code 831 ' 1 19_5_5_ Edition,_N_A_ _ _ _ _ _ Addenda, __N_-_ 1 7

_'_N_-__ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 B9

6. Identification of Components Repaired or Replaced .and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board

Other Year Repiaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Weld# 1-03 NA NA NA 14"-WFPD-17-601 NA Repaired No 7, Description of Work Grind weld* flush with pipe.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

NA

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

NA NA Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - -

Signed t:1. t L - &4~ "

_¥wner or~r's Deslgnee, Title rs.r- <t:;., if/,.,,., r!!Z,,Z,. Date~dA'--'-i'~.g~,_ ] ' - - - - - - - , 19 f '?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned..holding a valid commission issued by the Natiqnal Board of..B.oilar and df!res.sur11. Vessel Inspectors and the State Virginia HSB~ an ~ co.

or Province of Hartford, Ct. and employed by . of

- - - - - - - - - - - - - - - - - - - - - - - - . , _ . . - r - - . - r : = - - - - h a v ~ in_SPJCted the components described in this Owner's Report during the period /{), / ~ to L/fLVO i) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor-his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

./'?/"I ~ W,,...,__, Va. 883

6,LLJ-r--.r--._.La~~~*-~-+--+-~~--------Commissions ______________________

~ inspect~ National Board, State, Province, and Endorsements Date

Attachment 2 Page 47 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/12/97

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _ 1_ _~of _ _ 1 _ _ _ _ _ _ _ _ _ _ __

Address Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

One Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#o0328556-05, RR#97-084 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_......:.v.=.i=.rg"-'1=-=*n::.:i:.:a.:...::P.=o..::.w.=cer::.__ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _~N:.:A_ _ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __

Addreu

4. Identification of System _ _ _ _ Main _ _Steam ___ System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA NA NA 1-MS-RV-101B NA Repaired No

7. Description of Work Repair steam cut in flange face.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 L_

FORM NIS-2 (Back)

NA

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and th is repair conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp ______N_A_______________________________

Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - -NA --------------

SignedW ~ / ; A L Ownerorb~'s Designee, Title L~£ 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne{y holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of irginia and e~ployed by HSBI and I Co* of Hartford, Ct.

- - - - - - - - - - - - - - - - - - - - - - - - - - , , - - , ~ _ . . , . - - - - - h a ~ !~pected the components described in this Owner's Report during the period to lq/le//t?O , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/? / / C-:, .. 7'7 _ ~ Va. 883

- - - - - - ~ ~ - - ~ ~ - , - ~ ~ - , ._ ._ _,___~_ _ _ Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ ____,,~-/L,-__c.1>---1/_19

~ I Q

Attachment 2 Page 48 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 4/25/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00361402-02, RR#97-086 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_*r_g_i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addren

4. Identification of System _ _ _ _ Charging B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Trim Assembly(Plug) Copes-Vulcan Part# 132 40 NA l-CH-FCV-1122 NA Replaced No Trim Assembly(Plug) Copes-Vulcan Part# 132 40 NA l-CH-FCV-1122 NA Replacement No Replace trim assembly.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# SSY-326832

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _ NA

____ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Signed.J,£t~':1-~';/,-~~:--"'~~-~:S::~--.Z-~___.!!~~El~~:.J;;1i:;zA:£...__ _ Date _ _1j.,,_,~~if~------, 19 9?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned .. holding ii valid commission issued by the National Board of Boiler and dPreuurll, Vessel Inspectors and the State Virginia HSBI an ~ co.

or Province o f . . , ,. C and employed by of r1art:..1.oru, t:..

'.:ve .}'!spected the components described in this Owner's Report during the period / to /IJU~J)o . and state that to the best of my knowled~e and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning ttie examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~'-

'~'-=-,.c..........,_,,......_...,__,"'-+-+-......,=--=-=----Commissions _______ Va.883

~r~ National Board, State, Province, and Endorsements Date_ _ _ --+7!-+-*=~-~-'---~_1977

Attachment 2 Page 49 of 64 Serial No.: 97*311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/27/97

1. Owner Date--------------------

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00362273-0l, RR#97-088 Addrasa Aepalr Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir...;g::..i_*n_i_a_P_o_w_er.....,..,_ _ _ _ _ _ _ __ T ype Code Symbol S t a w -NA ----------

Name Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

AddreH

4. Identification of System _ _ _ _ Reactor

_ _ _ Coolant _ _ _ _System B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code

>,~1 ' Af1 National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Copes- t~noJ 2" Trim Assembly Vulcan, Inc. NA l-RC-PCV-1456 NA Replacement No

-ii!',, O>mr-'

5/8" Heavy Allied Nut &

Hex Nut Bolt Co., Inc. NA NA l-RC-PCV-1456 NA Replacement No 5/8" Structural Copes-Stud Vulcan, Inc. NA NA l-RC-PCV-1456 NA Replacement No

7. Description of Work Replace trim assbly, cage spacer and cover bolting.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) . This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-527734 (2" Trim Assbly); SSY-405741 (5/8" Heavy

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached Hex Nut) CNT-530451 (5/8" Structural Stud)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _.....::cN.:::A-=------------Expiration Date _____N_A_ _ _ _ _ _ _ _ _ __

SigneQt,~~gn~lr= ~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by . .HSBI and I Co. of Hartford, Ct. ~~spected the components described in this Owner's Report during the period to let~() , and sta_te that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

____. . .c2J~--<--=

. g_..._.,,_~

...Y2-..,.........

Inspector's Signature

..... ~-----Commissions _______V_a_._8_8_3_ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date_ _ _ _ _ b_,/;,_,'/_,3=--_19 7>

Attachment 2 Page 50 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS. OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreas Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00359546-0l, RR#97-089 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i_rg::..1_*n_i_a_P_o_w_er___,--------- T ype Code Symbol S t a W fNA -----------

Name Authorization N o . - - - - : : : - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Charging

____ System B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Trim Assembly Copes-Vulcan NA NA l-CH-HCV-1200A NA Replacement No 5/8" Heavy Mackson Hex Nut Incorporated NA NA l-CH-HCV-1200A NA Replacement No Bonnet Copes-Vulcan NA NA l-CH-HCV-1200A NA Replacement No

7. Description of Work_v_a_l_v_e_o_v_e_r_h_a_u_l_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# SY-14410 (Trim Assembly); BNT-467064 (5/8" Heavy

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached Hex Nut) CSY-257842 (Bonnet)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- = N ' - " A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. ----=N'-"A'-"-----------Expiration Date ----=N.,,A=------------

Signefil--L _d_ ~ .:z'I:r 64~

O w n e r ~ n e e , Title Date _ _,,,""/,,,.,._=,,.,.':..._..9._____ , 19 92 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct* have in_s9ecl)d the components described in this Owner's Report during the period to lo/l~l) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this, inspection.

c:2-~..-,r:2.....,"c-' ,'::-~-+-1,_,.-=.=_.:;.

. Inspector's Signature

__*__ Commissions _ _National _ _ _ _. .:V-=a::. . :. --=8...:8:;..;3=------------

Board, State, Province, and Endorsements Date_ _ _ ~b-+-./~/_/_ 1 9 <f7

Attachment 2 Page 51 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 4/25/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Address Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo35954a-01, RR#97-09o Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g_i_*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Sta~ _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - : , ~ - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Address Charging

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19,___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part#

Trim Assetnbly(Plug) Copes-Vulcan 144900MKD NA l-CH-HCV-1200C NA Replaced No Part#

Trim Assetnbly(Plug) Copes-Vulcan 144900MKD NA l-CH-HCV-1200C NA Replacement No Replace trim assembly.

7. Description of Work _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8, Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

PO # SY-17251 FORM NIS-2 (Back).

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

____ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - NA --,-------------

A.?-U.,~~~~~-~:rJ::::...!J:~~==---....il!!!Uif.l!<<.~~,.___Date _ _ ___,,,,~l;~.-------,

. 19 [i2 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,..holdjng II valid commission issued by the National Board of Boiler and dl're$UrJ!. Vessel Inspectors and the State v1rg1n1a HSBI an l co.

or Province of Hartford, Ct. and employed by _ of

~J; l~pected the components described in this Owner's Report during the period to t'/'li!(JJO , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME_ Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_____..... ~~

_--=-~-~-t:-1.':-.F""lJl"-'"""-"--"-----Commissions

_.~ _______ Va.883

~ } * ~ National Board, State, Province, and Endorsements Date

Attachment 2 Page 52 of 64 Ser;aL No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 4/25/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

AddreH Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00359547-01, RR#97-091 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _ v_ir_g_i_*n_i_a_P_o_we_r__,--------- NA Type Code Symbol S t a f f i { > - - - - - - - - - - -

Name Authorization N o . - - : : : : : - - - - - - - - - ~ - -

Same as above NA Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Charging

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _. Addende, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 _ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code

... National . Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part#

Trim Assembly(Plug) Copes-Vulcan 131347MKD NA 1-CH-HCV-1200B NA Replaced* No Part#

Trim Assembly(Plug) Copes-Vulcan 131347MKD NA l-CH-HCV-1200B NA Replacement No Replace trim assembly.

7. Description of W o r k * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered end the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# SY-14410

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

NA NA Certificate of Authorization No. Expiration D a t e - - - - - - - - - - - - - - - -

Signed Q~ A ~

Own;;;;fq;,; Deslgnee, Title

D'f4~;_,,a4 Date_~~.....,~'---"-C-----, 19 ~?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned,.holding a valid commission issued by the National Board ot.Bll.ilar and aeres,sur.e. Vessel Inspectors and the State v1rg1n1a HSBl an 1 co.

or Province of H f d dL [. UL I C C. and employed by of

.hjlve. ~spected the components described in this Owner's Report during the period '6 to I0/1'(112 () , and state that to the best of my knowledge and belief, the Owner h~s performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~ Va.883

_ _ _ _ __,~~~-"'-'"'+--~-"---~~-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

ins;;ecior'~ National Board, State, Province, and Endorsements Date_ _--F-F-ifr_...._---=-S--_ _19 97

Attachment 2 Page 53 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre1s Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ ___,_ _ _ _ _ _ _ _ _ __

Unit--------------------

Neme 5570 Hog Island Rd., Surry, Va. 23883 W0#00360924-02, RR#97-092 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v..ci;;;.;*r'-'g,_i_n_i""a°"'""Po"'-w_e.;...r_ _ _ _ _ _ _ _ __ Type Code Symbol StamP.---"""""N:..:A_ _ _ _ _ __

Name Authorization No. _ _ _ NA_ _ _ _ _ _ _ _ _ _ __

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System _ _ _ _F_e_e_d_w_at_e_r_s_y_s_t_em--------------------------'----

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _* Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8_9__

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired,. Stamped Name of Nanie of Manufacturer Board Oth'er . Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Anchor/Darling 3" Valve Valve Company EZ812-1-i NA 1-FW-58 NA Replacement No Energy & Proce ss 3" Pipe Corporation NA NA 1-FW-58 NA Replacement No

7. Description of Work Replace checkvalve 3" C. s. and piping.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure @"

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Ya in. x 11 in., (2) informa*

tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - CNT-532401 (3" Valve); CNT-498645 (3 11 Pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No, _ _ _ _N_A ___________ Expiration Date _ _ _ _~N=A~----------

Signe /.1. J L ,u.,.e'

~ ~ b i f s i g n e e , Title Z);:C' btt;,,NC56£. Date fldf I'/ ,19 9?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. h . d h d

- - - - - - - - - - - - - - - - - - - - - - - - - : : - - : r - - - - : . - = - , - - - - - ,aye l')specte t e components escri e "b d in this Owner's Report during the period b to /0//o/flD~Lf-

, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a Joss of any kind arising from or connected with this inspection.

~"-+-~~,..A,_~-=-;bJ-"""'-'--------Commissions _ _ _ _ _ _ _

---~~<---.,.....--=-4--+-.... V_a_.__8_8_3___________

i,,;p~7sfunature National Board, State, Province, and Endorsements Date._ _ _ _;;-,-+-/_il-_,_7___19 CZ

Attachment 2 Page 54 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/27/97

1. Owner Date--------------------

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00360923-02, RR#97-093 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g:....i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ NA Type Code Symbol S t a r m ? - - - - - - - - - - -

Name Authorization No. ---:c=------------

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Address

4. Identification of System _ _ _ _ Feedwater

_ _ _ _System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 _ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National . Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Anchor/Darling 3" Check Valve Valve Co. EZ812-1-2 NA 1-FW-27 NA Replacement No Energy & Proce,s 3" Pipe Corporation NA NA 1-FW-27 NA Replacement No

7. Description of Work Replace 3" C. S. Check valve and piping. ~) ~ ~s.(. M,

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

l FORM NIS-2 (Back)

PO# CNT-532401 (3" Check Valve); CNT-498645 (3" Pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repl aceroent conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- = - N ' - " A - = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Certificate of Authorization No. ___-=-N'-"A-=-----------Expiration Date ----""'N,,,_A-=-----------

SigneQ ~d ~

Ownero~esignee~

-C~ ~kf<_ Date ~ f 1-7 ,191 ;2 C.ERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia

and employed by HSBI and I Co. of Hartford, Ct. ~~e _il}Spected the components described in this Owner's Report during the period to IPjL?j{lJD , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

---..,.,..o..c:22~..,."".~.

~~c'-*+.- -=-=*~

. .,_-F---""'-'o,:;.'-":;,.. , _ ____._commissions _______V-=--=a=--=-.-=8'-'8==3___________

.' Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ __19 ?'2

-=b'-+-/;~/_o)-

I

Attachment 2 Page 55 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addreaa Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#000328784-02 RR#97-096 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir..;g::..1._*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Sta'IJJ?---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - : - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addreas

4. Identification of System _ _ _ _ Reactor

____ Coolant

_ _ _System B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 8_9 __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Rockwell Disc, Valve International NA NA l-RC-MOV-1587 NA Replacement No

7. Description of Work_v_a_l_v_e_o_v_e_r_h_a_u_l_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

PO# CNS-146385 (Disc, Valve)

FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's o"ata Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Signeti.1.£.-.

Ownero~ Deslgnee, Title Date -

Certificate of Authorization No. _ _ _.cNc.=A;;.___________ Expiration Date _ _ _ _N_A___________

£f _ t1U xs:e V,.,+/k 'f ,199.7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. 'v?~pected the components described

/(?. "!} 0 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

,I.e..., /Jt_....;'4~4-.,_~.1<....-1<-~M..,'~-=--~.cc._

______ commissions _______V_a_._8_8_3____________

~c~~~ National Board, State, Province, and Endorsements Date,_ _ _ _ _...cc.b__,/'--1_!__19 '72

Attachment 2 Page 56 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 4/18/97

1. Owner Date _ _ _ _ _ _...:__ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _~of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Supry Power Station One

2. Plant Unit-------------'-------

Name 5570 Hog Island Rd. , Surry, Va. 23883 wo#00362393-01, RR#97-097 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i...;rg=-1-*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ . Type Code Symbol Stawf---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addrea&

4. Identification of System _ _ _ _ Safety

_ _ _Injection B31.l 55 NA N-1, N-7

5. (al Applicable Construction Code 19_._ _ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code NatiO!lal Repaired, Stamped Name of Name of 1 Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Weld 7-0lBC NA NA NA 2"-SI-81-1502 NA Repaired No Description of Work Repair weld 7-0lBC as shown on dwg. ll44B-WMKS-Ol22Kl. Code case N-41'1* applies.

7. Jtf,.,, -17

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure 0"'

Other O Pressure Alo,~ psi Test Temp. /fl oC °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet. is numbered and the number of sheets is recorded at the top of this form.

(12/821 This Form (E00030l may be obtained from the Order Dept., ASME_. 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

None FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

NA NA

'~

Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - -

SigneWJ J ,j1 - -< fi_,.,,-- h4L~c&?

Ownerbr~~. Title Date 4f"

, 19 92 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned,.holding a valid commission issued by the National Board of Boiler and dPrefillure Vessel Inspectors and the State Virginia HSBI an ~ Co.

or Province of Hart fora, Ct . and employed by of

,h'Y.'e _!flspected the components described in this Owner's Report during the period to /_l!ffl/f/~i) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Date _ _ ___,_~+-i.__lcr;-=---_19 97

Attachment 2 Page 57 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00343858-04 RR#97-098 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r.;;.g_in_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stary_R---N_A_ _ _ _ _ __

Name Authorization N o . - - - = = - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System _ _ _ _ Reactor

____ Coolant

_ _ _System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National '

Repaired, Stamped Name of Nam*e of Manufacturer Board Other

Year Replaced, (Yes Component Manufacturer Serial No, No, Identification Built or Replacement .or No) 1 1/2" Socketed Dubose Nationa Flange Energy Srvc, II C. .NA, NA 1-RC-P-lA NA Replacement No

7. Description of Work Cut 1 1/2" SS Pp & fit for socket fng & short line

a~ ~q A/- :I: _

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure W Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

PO# CNS-469377 (1 1/2" Socketed Flange)

FORM NIS-2 (Back)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _-'Nc..cAc.c...__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No, _ _ _~N=A-=-----------Expiration Date ----=-N=A-=-----------

Signe / ] . / A P,,t.,~./

~ e f ' s Designee, Title Z-sr'. Date _ _ .z;;;c..a,,_.*"""-&~<-------,, 19 /R?

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. hie ~p~ted the components described

/QI '/~ '

'() ,

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

--,-----i,--/)* ,...,,'--..,.*'---------Commissions _ _ _ _ _ _""""V""a-'-'-._8_8_3___________

""""'""al_""",.,.*__,,~.,,___,._..,**

~spector's Signature

National Board, State, Province, and Endorsements Date_ _ _ _ _ Co__,_/~!;l___

__19 ( /

Attachment 2 Page 58 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00345586-01 RR#97-100 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_ir_g_1_*n_i_a_P_o_w_er--:-:--------- Type Code Symbol Stary.f---N-A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System _ _ _ _ Main

_ _Steam

___ System B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _. Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9 __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Grinnell Snubber Corporation 33860 NA l-MS-HSS-7 NA Repi'acement No

7. Description of Work_R_e_p_l_a_ce_s_n_u_b_b_e_r_.- - - - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D

Nominal Operating Pressure D Other D Pressure psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BYa in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 L

FORM NIS-2 (Back)

PO# CNT-536041 (Snubber)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _- = N " ' - A = - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Signed <i2 ~t,)~

av.mer or ~~Designee, Title f~ ~~ -

Certificate of Authorization No. ---~N=-=A=----------- Expiration Date _ _ _ _N = A ~ - - - - - - - - - -

u.-""c.___,/.<--J--=------, 19___.,_?..___

Date-~11...b...,l,f._.c...

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of

_______H_a_r_t_f_o_r_d_,,___C_t_._-----------,--t=-------:hlJ>le ~').i!Jected the components described in this Owner's Report during the period _ _ _ _ _ _-1...--"',f-!...-?,!+~-to /0(/~~c) , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ~. --11.i

~

- - - - - I ' - ~----7"-+-----c(~~...,__...:...-+-~--=::.....------Commissions

- _______V--'--"a=----'-.---=8c.c8c.3=------------

National Board, State, Province, and Endorsements Date_ _ _----'~=+-/;~/,_'c:'_ _19 97 7

-~----- - --- - -- ----- ---------- - - - --- ---- ------------ - - - - ~ - - - -- - - - - - * ----

Attachment 2 Page 59 of 64 Serial No.: 97-311 Docket No.:.50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/12/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - , - , - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#003456o8-0l, RR#97-lOl Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_rg::.1_*n_i_*a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - -

Same as abov9 . Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11 Safety Injection System

4. Identification of System _ _ _ _ _ _ _ _ _- - ' - - - - - - - - - - - - - - - - - - - - - - - - ' - - - - - - -

B3l.l 55 NA N-1, N-7 5, (a) Applicable*CQnstruction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 8

(bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19, ___9 __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped

Name of Nam*e of Manufacturer Eioard Other ** Year Replaced, (Yes Componen.t Manufacturer Serial No, No, . Identification Built or Replacement or No)

Snubber Grinnell Corp. 33869 NA l-SI-HSS-26 NA Replacement No Replace *snubber.

7. Description of Work _ _ _ _ _ _ _ _- ' - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - ' - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nom.inal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# CNT-539901

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE

_We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code,Section XI.

Type Code Symbol Stamp ______N_A________________________________

Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________

Signed CJ..~ ,I/

Owneror~gnee, Title

_. 1 >::C: ---

Date _ ___,.\h,,.__,,.;vc..&

............c.L.=L.=---, 19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne"\7: holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of irginia and employed by HSBI and I Co* of Hartford, Ct.

+----c--->";;--;-----ha_ye il)Spected the components described in this Owner's Report during the period to / Cfltf)"P D , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~ -~ Va. 883

_ ___,_ __.,,----...,s.<<t--__.__-~----P--<---='---_,.'-----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

~~ National Board, State, Province, and Endorsements Date_ _ _ ~fo=-,/;,_~'---19 I

97

Attachment 2 Page 60 of 64 Serial No.: 97*311 Docket No.: 50*280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 (i Sheet _____*of _ _ _ _ _ _....,.i_*- - - - - -

Addre11 Surry Power Station One

2. Plant Unit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name I 5570 Hog Island Rd. , Surry, Va. 23883 W0#00345603-01 RR#97-102 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_rg_i_*n_i_*a_P_o_w_e_r,.,..._ _ _ _ _ _ _ __ NA Type Code Symbol S t a ' N ' R - - - - - - - - - - -

Name Authorization N o . - - - ; ; - ; - - - - - - - - - - - -

Same as above NA Expiration Date _ _ _ _ _~ - - - - - - - - -

Addre11 Main Steam System

4. Identification of System _ _ _ _ _ _ _- - : - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B31.1 55 NA N-1, N-7

5. (al Applicable Construction*Code 19 ___ Edition, _ _ _ _ _ _ _. Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ __

6. Identification of Components Repaired or Replaced and Replacement Components I ASME Code Nation11I R.epajred, Stamped

.. Replaced, (Yes Name of Name of Manufacturer Board Other Year Component Manufacturer Serial No. No. Identification Built or Replacement or No) t:

i*

Snubber Grinnell Corporation

,o 33sit/ NA 1_-MS-HSS-11 NA Repla~ement No

i I

~NI.

.. *i;./f?

7. Description of Work._R_e_p_l_a_c_e_sn_u_b_b_e_r_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _+-------

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D I,.

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provi.ded (1) size is BY. in. x 11 ir., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. 1

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New Y,Qrk, N.Y. 10017

~,1 RE~RINT 12/91

FORM NIS-2 (Back)

PO# CNT-539901 (Snubber)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _..:N...:Ac..c...._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

=-=----------Expiration Date _ _ _ _N = A ~ - - - - - - - - - -

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. h : inspected the components described in this Owner's Report during the period to lqL'L'Y/PD , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the lnspei;tor nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

+~__,"- . '"-'----~-;.....,~c...,.'-""--=-=----Commissions

.o _ _ _ _ _ _. :V..:a.c. :. .__:8...:8:..3c...-__________

-i,;spector's ~~

National Board, State, Province, and Endorsements Date_ _ ____,,boe..,/;,__/'--:,_ _ _19 97

I ---

Attachment 2 Page 61 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Virgifiia Eleetrraie and Power Cg Date --<6,_,/.....3~/.;;a9c,7c....__ _ _ _ _ _ _ _ _ _ _ __

eme Sheet _ _........_ of _ _.......__ _ _ _ _ _ _ _ __

5999 BemiAieA BL*,ei., Gka'ar*~~-leR, Va 23060

2. Plant _ _,,S..-i1:1erF"""1'F~'J...

0

- -lPl-'<8B\'&,if'EOHraa....,S!!R=t:,;:;rt,1,'&,l.1,<O c J H R , - - - - - - - - - - -

""lir11me Unit _.J..1..1~----------------

23883 WQ#QQ346920-16, RR#97-103 Repair Org11nlzetlon P.O. No., Job No., ate.

3. Work Performed by _ __.V...iu.C.:.i9u.i.... o...,ia......._p.,.o"'w"'"e._r, - - - - - - - - - - Type Code Symbol Stal"rlJ'A,----N_A_ _ _ _ _ __

Name Authorization No.--:-:-:------.......,..-----

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ __

AddreH

4. Identification of System _ _ _ _F_ee_d_w_a_t_e_r_s_y_s_t_em_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31. 1 55 NA N-1, N-7

5. (al Applicable-Construction Code _ _ _ _ _ _ _ 19 _ _ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

NA . NA NA 1-FW-PPS-87 NA Repaired No 14 Pipe 7 _ Description of Work __R_e_p_a_i_r_b_a_s_e_m_et_a_L_i_nd_1_*c_a_t_i_on_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure D OtherO Pressure _ _ _ _ _ psi TestTemp. _ _ _ _ _ _°F NOTE: Supplemental sheets in form* of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

.. (12/82) This Form (EOOQ30) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

9. Remarks - - - ~ N = A ~ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Appllcable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE repair We certify that the statements made in the report are*correct and this conforms to the rules of the ASME Code,Section XI. repair or replacement NA Type Code Symbol Stamp _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

NA NA Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Sign~d Cl __/ ~ . 9, e/ ;rJ"£ o / w ~ ~ r ' s Oeslgnee, Title Date_1¥/-cw,,.,*...,,.f:....__1

______ , 19 P2 CERTIFICATE OF INSERVICE INSP.ECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by ussr. . .a:nd n .. T I

e-.

of

, ,,?:2'~i>ted the components described in this Owner's Report during the period 6 to,_a...r..,*~--~'-"--------, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

___..,.a'--,,_b,,'O>=C_.___,__~,,_4-+--=--'-

_______ Commissions __________,Jv-Jeia~,-e6>E6~J"".- - - - - - - - - -

lnspec~ National Board, State, Province, and Endorsements 0 /f Date*-----~-,7,-.L.;,__,.~----19 117

-- ~

u Attachment 2 Page 62 of 64 Serial No.: 97*311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/16/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _____ 1 1 of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

One Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00363201-02, RR#97-109 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by_......:Vc.::i::r...ig.:::i:.:n::;ia::....:P:.::o:.::w:.::e:.=r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.:N.::.A=---------

Name NA Authorization N o . - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addre11

4. Identification of System _ _ _ _Blowdown _ _ _ _System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 . . NA N-1, N-7 5, (a) Applicable Construction Code 19 ____ Ed1t1on, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Eioard Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 2 1/2" Globe Valve Conval Inc. 14692 NA 1-BD-11 NA Replacement No C,>r ~~

7. Description of Work Replace 2 1/2 c.s. valve. Al-~/6-/ -~,~-

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - SSY-137912

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Se9tion XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Certificate of Authorization No. _ _ _ _N_A ___________ Expiration Date _____N_A ___________

Signed t:'). ,,b' ~ - - ,(.4,.. <

~ e r Uw~ignee, Title J:.Sf br/4/.vd~ Date h:,,j It/ ,1992 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBl and I Co* of Hartford, Ct.

ze ~spected the components described I I~ DO , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

- - - - - f - - ,/T),e,,"""--""~-P'--"'--"--"'-""_"".,.=--------Commissions

. _______ v_a_._8_ 8 _3_ _ _ _ _ _ _ _ _ _ __

~ a c t o r ' s Signature National Board, State, Province, and Endorsements Date,_ _ _ _ _~_,+-/-2:_7~_19 97

l I

Attachment 2 I Page 63 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 5/21/97 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre1s Surry Power Station One

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00363216-0l, RR#97-lll Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_--=V-=i=r-"-g.:in::;1:.:*a::.. . .:l?:.. :o:..:;wc.::e.:r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _..:.N::.;A:..__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __

Addrea&

4. Identification of System ____R_e_a_c_t_o_r_c_oo_l_a_n_t_s_y_s_te_m_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

83 1 1 7

5. (a) Applicable Construction Code 1. 19----=-=--Edition,_N_A_ _ _ _ _ _ Addenda, __N_-__'_N_-__ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 8 9

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired,- Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Anchor/Darling 101, Snubber, Mechanica Industries, In ~ NA l-RC-MSS-218 NA Replacement No

~~

r/:1.,/17

7. Description of Work Remove/Replace snubber.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BYa in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00?30) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# - SY-264744 (Snubber, Mechanical)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A________________________________

Certificate of Authorization No. ----'N==A=------------ Expiration Date ------'N==A=-----------

Signe C)_~,i)- -* V

~ n e r o ~ l g n e e , Title f i f L;,t(jp~&r;'4,_ Date_.£....&~,.,__,A/---. 19 97 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. ha~ i~ected the components described IC?, 1:& D , and state that to ttie best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

---,'----,, /J. 0 ___._,~_,_.......,.....,...A.,,,,.~~~~~---Commissions _ _ _ _V_a_._8_8_3_ _ _ _ _ __

__7..__..

~cJsm~7e National Board, State, Province, and Endorsements

Attachment 2 Page 64 of 64 Serial No.: 97-311 Docket No.: 50-280 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/06/97

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ __;__ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _~of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre11 Surry Power Station One

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00363429-0l RR#97-112 Addre11 Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_r.::.g_in_i_*a_P_o_w_e_r.,..,..._ _ _ _ _ _ _ __ Type Code Symbol StarnR---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - - -

Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __

Addra111 Safety Injection System

4. Identification of System _ _ _ _ _ _ _ _- ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . . : . . . . . - -

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _. Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired,. Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Mackson 5/8" Rod Incorporated NA NA l-SI-LT-1926 NA Rep la.cement No Mackson 5/8" Hex Nut Incorporated NA NA l-SI-LT-1926 NA Replacement No

7. Description of Work Replace bolting in 2". Flange.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back)

PO# BNT-467650 (5/8" Rod and Hex Nut)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A________________________________

Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A___________

Signed /.J ~d_ . ~ z5£

~.;naro~signee, Title Date--""'Z'-111~~,,,J...,....___..::./...:::~:___ _ , 19 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State 97 or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. haye il)Spected the components described in this Owner's Report during the period ~ to /tJ/(~/00 I , , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or irnplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/?~.~

---t~---,,r=~--~-~---;c.-f<--'~~~-------Commissions _______V_a_._8_8_3____________

Inspector's Signature National Board, State, Province, and Endorsements Date._ _ _ _ _ b_,_/j_/_;2...

I

__19 '7 /

Attachment 3 Surry Power Station Unit 1 Inservice Inspections Evaluation of Indications WCAP-14874 Handbook on Flaw Evaluation Surry Units 1 and 2 Steam Generators Upper Shell to Cone Weld Regions

ML18151A311

Text

Navigation menu

Search