ML19163A221

Supplement No. 5 - Changes to the Peach Bottom Atomic Power Station, Units 2 and 3, Subsequent License Renewal Application

ML19163A221
Person / Time
Site:	Peach Bottom
Issue date:	06/12/2019
From:	Gallagher M Exelon Generation Co
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML19163A221 (4)

Text

Exelon Generation 200 Exelon Way Kennett Square, PA 19348 www.exeloncorp

.com June 12, 2019 10 CFR 50 10 CFR 51 10 CFR 54 U.S. Nuclear Regulatory Commission Attention:

Document Control Desk Washington, DC 20555-0001 Peach Bottom Atomic Power Station, Units 2 and 3 Renewed Facility Operating License Nos. DPR-44 and DPR-56 NRC Docket Nos. 50-277 and 50-278

Subject:

Supplement No. 5 -Changes to the Peach Bottom Atomic Power Station, Units 2 and 3, Subsequent License Renewal Application

References:

1. Letter from Michael P. Gallagher, Exelon Generation Company, LLC (Exelon) to NRC Document Control Desk, dated July 1 O, 2018, "Application for Subsequent Renewed Operating Licenses" 2. Letter from Michael P. Gallagher, Exelon Generation Company, LLC (Exelon) to NRC Document Control Desk, dated September 14, 2018, "Changes to the Peach Bottom Atomic Power Station, Units 2 and 3, Subsequent License Renewal Application" (Supplement No. 1) 3. Letter from Michael P. Gallagher, Exelon Generation Company, LLC (Exelon) to NRC Document Control Desk, dated January 23, 2019, "Changes to the Peach Bottom Atomic Power Station, Units 2 and 3, Subsequent License Renewal Application" (Supplement No. 2) 4. Letter from Michael P. Gallagher, Exelon Generation Company, LLC (Exelon) to NRC Document Control Desk, dated February 11, 2019, "Changes to the Peach Bottom Atomic Power Station, Units 2 and 3, Subsequent License Renewal Application" (Supplement No. 3) 5. Letter from Michael P. Gallagher, Exelon Generation Company, LLC (Exelon) to NRC Document Control Desk, dated March 18, 2019, "Changes to the Peach Bottom Atomic Power Station, Units 2 and 3, Subsequent License Renewal Application" (Supplement No. 4) In Reference 1, Exelon submitted the Subsequent License Renewal Application (SLRA) for the Peach Bottom Atomic Power Station, Units 2 and 3 (PBAPS). In References 2, 3, 4, and 5, Exelon submitted Supplement Nos. 1, 2, 3, and 4 to the SLRA for PBAPS. The purpose of this letter is to provide Supplement No. 5 to the SLRA for PBAPS. Supplement No. 5 includes one change to the SLRA, which provides additional information and clarification in SLRA Section B.2.1.29 to address the NRC Safety Review Audit information needs.

June 12, 2019 U.S. Nuclear Regulatory Commission Page 2 Enclosure A to this letter provides a description of the change, and corresponding mark-ups to the affected portion of the SLRA, thereby supplementing the PBAPS SLRA. This letter contains no new regulatory commitments.

This submittal has been discussed with the NRC License Renewal Senior Project Manager for the PBAPS Subsequent License Renewal project. If you have any questions, please contact Mr. David Distel, Licensing Lead, Exelon License Renewal Projects, at 610-765-5517.

I declare under penalty of perjury that the foregoing is true and correct. Executed on the 12 1 h day of June 2019. Respectfully submitted, Vice President

-License Renewal and Decommissioning Exelon Generation Company, LLC

Enclosure:

A. Change to the PBAPS Subsequent License Renewal Application cc: Regional Administrator

-NRC Region I NRC Senior Project Manager (Safety Review), NRR-DMLR NRC Project Manager (Environmental Review), NRR-DMLR NRC Project Manager, NRR-DORL-Peach Bottom Atomic Power Station NRC Senior Resident Inspector, Peach Bottom Atomic Power Station R.R. Janati, Pennsylvania Bureau of Radiation Protection D.A. Tancabel, State of Maryland Introduction Enclosure A June 12, 2019 Enclosure A Page 1 of 2 Change to the PBAPS Subsequent License Renewal Application This Enclosure contains one change that is being made to the Subsequent License Renewal Application (SLAA) that was identified after submittal of the SLRA. For this item, the change is described and the affected page number(s) and portion(s) of the SLRA is provided.

For clarity, entire sentences or paragraphs from the SLRA are provided with deleted text highlighted by strikothroughs and inserted text highlighted by balded italics.

June 12, 2019 Enclosure A Page 2 of 2 Revision of SLRA Section B.2.1.29 for Internal Coatings Affected SLRA Sections:

Section B.2.1.29 SLRA Page Numbers: B-163 Issue: SLRA Table 3.3.2-13, "Emergency Service Water System," identifies stainless steel with internal coating as included within the scope of the program; however, SLRA Section B.2.1.29 does not include stainless steel. Description of Change: SLRA Table 3.3.2-13, "Emergency Service Water System," includes, under component type "Piping, piping components with Internal Coatings," the material "Stainless Steel (with Internal Coating)." The Peach Bottom Emergency Service Water System contains flow elements that are stainless steel with an internal coating. As discussed in the issue statement above, this material type was not included in the list of materials provided in SLRA Section B.2.1.29.

Accordingly, SLRA Section B.2.1.29, Page B-163, is revised as shown below to include the material type "stainless steel." B.2.1.29 Internal Coatings/Linings for In-Scope Piping, Piping Components, Heat Exchangers, and Tanks Program Description The Internal Coatings/Linings for In-Scope Piping, Piping Components, Heat Exchangers, and Tanks aging management program is a new condition monitoring program that includes visual inspections of internal coatings/linings of cast iron, ductile iron, stainless steel, and carbon steel piping, piping components, valve bodies, tanks, heat exchangers, accumulators, and blower housings exposed to raw water, treated water, waste water, condensation, and lubricating oil. There are no piping or components with internal coatings/linings in the program scope that are exposed to closed-cycle cooling water, treated borated water, or fuel oil. This program is not used to manage the integrity of coatings applied to external surfaces of piping or components.