ML062160052
ML062160052 | |
Person / Time | |
---|---|
Site: | Oyster Creek |
Issue date: | 07/28/2006 |
From: | Ashley D NRC/NRR/ADRO/DLR/RLRA |
To: | AmerGen Energy Co |
Ashley D | |
References | |
%dam200612 | |
Download: ML062160052 (10) | |
Text
July 28, 2006 LICENSEE: AmerGen Energy Company, LLC FACILITY: Oyster Creek Nuclear Generating Station
SUBJECT:
SUMMARY
OF TELEPHONE CONFERENCE CALLS HELD ON MARCH 24 AND APRIL 7, 2006, BETWEEN THE U.S. NUCLEAR REGULATORY COMMISSION AND AMERGEN ENERGY COMPANY, LLC, CONCERNING DRAFT REQUEST FOR ADDITIONAL INFORMATION PERTAINING TO THE OYSTER CREEK NUCLEAR GENERATING STATION, LICENSE RENEWAL APPLICATION The U.S. Nuclear Regulatory Commission staff (NRC or the staff), and representatives of AmerGen Energy Company, LLC (AmerGen), held two telephone conference calls on March 24 and April 7, 2006 to discuss and clarify the staffs draft request for additional information (D-RAI) concerning the Oyster Creek Nuclear Generating Station license renewal application (LRA).
The conference calls were useful in clarifying the intent of the staffs D-RAI. provides a listing of the conference call participants. Enclosure 2 contains a listing of the D-RAI discussed with the applicant, including a brief description on the status of the items.
The applicant had an opportunity to comment on this summary.
/RA/
Donnie J. Ashley, Project Manager License Renewal Branch A Division of License Renewal Office of Nuclear Reactor Regulation Docket No. 50-219
Enclosures:
As stated cc w/encls: See next page
ML062160052 DOCUMENT NAME: E:\Filenet\ML062160052.wpd OFFICE PM:RLRA:DLR LA:RLRA:DLR BC:RLRA:DLR NAME DAshley YEdmonds LLund DATE 07/ 26 /06 07/ 26 /06 07/ 28 /06
Oyster Creek Nuclear Generating Station cc:
Site Vice President - Oyster Creek Director - Licensing and Regulatory Affairs Nuclear Generating Station AmerGen Energy Company, LLC AmerGen Energy Company, LLC Correspondence Control P.O. Box 388 P.O. Box 160 Forked River, NJ 08731 Kennett Square, PA 19348 Senior Vice President of Manager Licensing - Oyster Creek Operations Exelon Generation Company, LLC AmerGen Energy Company, LLC Correspondence Control 200 Exelon Way, KSA 3-N P.O. Box 160 Kennett Square, PA 19348 Kennett Square, PA 19348 Kathryn M. Sutton, Esquire Regulatory Assurance Manager Morgan, Lewis, & Bockius LLP Oyster Creek 1111 Pennsylvania Avenue, NW AmerGen Energy Company, LLC Washington, DC 20004 P.O. Box 388 Forked River, NJ 08731 Kent Tosch, Chief New Jersey Department of Assistant General Counsel Environmental Protection AmerGen Energy Company, LLC Bureau of Nuclear Engineering 200 Exelon Way CN 415 Kennett Square, PA 19348 Trenton, NJ 08625 Ron Bellamy, Region I Vice President - Licensing and U.S. Nuclear Regulatory Commission Regulatory Affairs 475 Allendale Road AmerGen Energy Company, LLC King of Prussia, PA 19406-1415 4300 Winfield Road Warrenville, IL 60555 Correspondence Control Desk AmerGen Energy Company, LLC Regional Administrator, Region I 200 Exelon Way, KSA 1--1 U.S. Nuclear Regulatory Commission Kennett Square, PA 19348 475 Allendale Road King of Prussia, PA 19406-1415 Oyster Creek Nuclear Generating Station Plant Manager Mayor of Lacey Township AmerGen Energy Company, LLC 818 West Lacey Road P.O. Box 388 Forked River, NJ 08731 Forked River, NJ 08731 Senior Resident Inspector License Renewal Manager U.S. Nuclear Regulatory Commission Exelon Generation Company, LLC P.O. Box 445 200 Exelon Way, Suite 230 Forked River, NJ 08731 Kennett Square, PA 19348
Oyster Creek Nuclear Generating Station cc:
Mr. James Ross Nuclear Energy Institute 1776 I Street, NW, Suite 400 Washington, DC 20006-3708 Mr. Michael P. Gallagher Vice President License Renewal Exelon Generation Company, LLC 200 Exelon Way, Suite 230 Kennett Square, PA 19348 Mr. Christopher M. Crane President and Chief Nuclear Officer AmerGen Energy Company, LLC 4300 Winfield Road Warrenville, IL 60555
Note to: AmerGen Energy Company, LLC, Facility: Oyster Creek Nuclear Generating Station from Donnie Ashley dated July 28, 2006.
SUBJECT:
SUMMARY
OF TELEPHONE CONFERENCE CALLS HELD ON MARCH 24 AND APRIL 7, 2006 , BETWEEN THE U.S. NUCLEAR REGULATORY COMMISSION AND AMERGEN ENERGY COMPANY, LLC, CONCERNING DRAFT REQUEST FOR ADDITIONAL INFORMATION PERTAINING TO THE OYSTER CREEK NUCLEAR GENERATING STATION, LICENSE RENEWAL APPLICATION HARD COPY DLR R/F E-MAIL:
JFair RWeisman AMurphy RPettis GGalletti CLi GBagchi SSmith (srs3)
SDuraiswamy YL (Renee) Li RidsNrrDlr RidsNrrDlrRlra RidsNrrDlrRlrb RidsNrrDe RidsNrrDci RidsNrreEemb RidsNrrDeEeeb RidsNrrDeEqva RidsNrrDss RidsNrrDnrl RidsOgcMailCenter RidsNrrAdes DLR Staff
C. Holden R. Laufer G. Miller R. Bellamy, RI R. Cureton, RI J. Lilliendahl, RI M. Modes, RI M. Sykes, RI T. Mensah M. Young OPA
LIST OF PARTICIPANTS FOR TELEPHONE CONFERENCE CALLS TO DISCUSS THE OYSTER CREEK NUCLEAR GENERATING STATION LICENSE RENEWAL APPLICATION March 24, 2006 Participants Affiliations Donnie Ashley U.S. Nuclear Regulatory Commission (NRC)
Amar Pal NRC Duc Nugyen NRC Don Warfel AmerGen Energy Company, LLC (AmerGen)
John Hufnagel AmerGen Deborah Spamer AmerGen April 7, 2006 Participants Affiliations Donnie Ashley U.S. Nuclear Regulatory Commission (NRC)
Amar Pal NRC Duc Nugyen NRC Don Warfel AmerGen Energy Company, LLC (AmerGen)
George Beckl AmerGen Deborah Spamer AmerGen ENCLOSURE 1
DRAFT REQUESTS FOR ADDITIONAL INFORMATION (D-RAI)
OYSTER CREEK NUCLEAR GENERATING STATION LICENSE RENEWAL APPLICATION April 7, 2006 The U.S. Nuclear Regulatory Commission staff (the staff) and representatives of AmerGen Energy Company, LLC (AmerGen), held a telephone conference call on March 24, 2006, and April 7, 2006, to discuss and clarify the staffs draft request for additional information (D-RAI) concerning the Oyster Creek Nuclear Generating Station (OCNGS), license renewal application (LRA). The following D-RAIs were discussed during the telephone conference calls.
D-RAI-3.6.2.2.5 Industry operating experience as discussed in Information Notice 93-95 identified the potential for loss of offsite power due to salt contamination of the switchyard insulators. On March 17, 1993, Crystal River Unit 3 experienced a loss of the 230 kV switchyard (normal offsite power to safety-related busses) when a light rain caused arcing across salt-laden 230 kV insulators and opened breakers in switchyard. Since 1982, Pilgrim station has also experienced several loss of offsite power events when heavy ocean storms deposited salt on the 345 kV switchyard causing the insulator to arc to ground. The applicant stated that an incident on September 18, 2003, was considered a highly unusual weather condition that resulted in wind blown salty spray deposited on insulators causing flashing. The fact that industry operating experience has shown that the potential loss of offsite power due to salt contamination of switchyard insulators does exist for facilities that are near the sea coast where salt spray is prevalent, the staff requests the applicant to provide an aging management program (AMP) to manage the aging effects of insulator surface contamination due to salt deposits.
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.2.6-1 Torque relaxation for bolted connections is a concern for switchyard bus connections and transmission conductors connections. An electrical connection must be designed to remain tight and maintain good conductivity through a large temperature range. Meeting this design requirement is difficult if the material specified for the bolt and the conductor are different and have different rates of thermal expansion. For example, copper or aluminum bus/conductor materials expand faster than most bolting materials. If thermal stress is added to stresses inherent at assembly, the joint members or fasteners can yield. If plastic deformation occurs during thermal loading (i.e., heatup) when the connection cools, the joint will be loose. EPRI document TR-104213, Bolted Joint Maintenance & Application Guide recommends inspection of bolted joints for evidence of overheating, signs of burning or discoloration, and indication of loose bolts. The staff requests the applicant to provide a discussion as to why torque relaxation for bolted connection is not a concern for OCNGS.
ENCLOSURE 2
Discussion: A review of the boundary drawings showed that the switchyard bus connections are not in the scope of license renewal. The question will be revised to remove the reference to the switchyard bus connections. The applicant understands the revised question and will provide an answer.
D-RAI-3.6.2.2.6-2 The staff requests the applicant to compare the Ontario Hydroelectric study to Oyster Creek.
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.3.1-1 In LRA Section 3.6.2.3.1, the applicant stated that These panels are not located in adverse localized areas of high temperature or humidity. These rooms are protected from weather variations and are not subject to significant temperature variations. The staff requests the applicant to explain how these rooms are protected from weather variations.
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.3.1-2 In LRA Section 3.6.2.3.1, the applicant indicated that With regard to internal moisture (i.e., formation of condensation), a walkdown revealed no signs of moisture/humidity in the area, or any sign of moisture within the enclosure. The staff requests the applicant to provide details about the walkdown (number of fuse holders inspected and condition of the fuse holders, etc.).
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.3.1-3 In the LRA Section 3.6.2.3.1, the applicant stated that SCRAM solenoid fuses are not subject to frequent manipulations. When these circuits need to be de-energized, power is removed at the safety-related power supplies. When manipulated an inspection is performed... The staff requests that the applicant discuss the disconnection means at the safety-related power supplies. Also, discuss how often the fuses are manipulated and the reason for this manipulation.
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.3.2 In LRA Section 3.6.2.3.2, the applicant stated that Because of the non-EQ electrical penetrations are the same as the EQ electrical penetrations, and the EQ penetrations have been shown to have a qualified life of 60 years, Amergen concludes that non-EQ electrical penetrations are also qualified for a 60-year life. The staff requests that the applicant confirm that non-EQ electrical penetrations will be exposed to the same environment as the EQ penetrations.
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.3.3 In LRA Section 3.6.2.3.3, under the heading Thermal Cycling, Ohmic Heating and Electrical Transients, the applicant stated that At Oyster Creek, power supply cables are typically installed in a continuous run from the supply, e.g., switchgear, to the load, e.g., motor. The metallic parts of connections to the supply and load are therefore part of, or internal to, active components, e.g., the switchgear and motor, and therefore are not subject to aging management. The AMP XI-E6, Electrical Cable Connections not Subject to 10 CFR 50.49 Environmental Qualification Requirements of NUREG-1801, Rev. 1 specified that connections associated with cables within the scope of license renewal are part of this program, regardless of their association with active or passive components. Also, refer to pages 107, 256 and 257 of NUREG-1833, Technical Bases for Revision to the License Renewal Guidance Documents, for additional information regarding AMP XI-E6. The staff requests that the applicant provide an AMP with the ten elements.
Discussion: The applicant understands the question and will provide an answer.
D-RAI-3.6.2.3.4 In LRA Section 3.6.2.3.4, the applicant stated that Ground connections are commonly made with welds or compression type connectors, which include compression-, bolted-, and wedge type devices. Torque relaxation for bolted connections is a concern for ground connections.
An electrical connection must be designed to remain tight and maintain good conductivity through a large temperature range. Meeting this design requirement is difficult if the material specified for the bolt and the conductor are different and have different rates of thermal expansion. For example, copper or aluminum conductor materials expand faster than most bolting materials. If thermal stress is added to stresses inherent at assembly, the joint members or fasteners can yield. If plastic deformation occurs during thermal loading (i.e.,
heatup) when the connection cools, the joint will be loose. EPRI document TR-104213, Bolted Joint Maintenance & Application Guide recommends inspection of bolted joints for evidence of overheating, signs of burning or discoloration, and indication of loose bolts. The staff requests that the applicant provide a discussion as to why torque relaxation for bolted connection is not a concern for OCNGS.
Discussion: The applicant understands the question and will provide an answer.