Latest revision as of 04:14, 23 February 2020

Text

Form NIS-1 Owner Rept for ISI, Required by Provisions of ASME Code
	ML18151A438
Person / Time
Site:	Surry
Issue date:	08/08/1996
From:	; VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.)
To:	;
Shared Package
ML18151A439	List: ML18151A438; ML18153A059;
References
	NUDOCS 9609100206
	Download: ML18151A438 (122)
	v • d • e

{{#Wiki_filter:Attachment I 1 .J Page 1 of 34 Serial No.: 96-310 Docket No.: 50-281 FORMNIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules _ 1. Owner __V_i_r-=-g_in_1_*a_E_l_e_ct_r_i_c_a_nd_P_o_w_e_r_c_o_m_:__p_an_y'-- ----5_o_oo_D_o_m_i_n_io_n_B_lv_d_._:_'_G_le_n_A_l_l_en-','----v_A_23_0_6_o_ _ _ _ _ __ (Name and Address of Owner) Surry Power Station, 5570 Hog Island Road, Surry, VA 23883

2. P l a n t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

(Name and Address of Plant)

3. Plant Unit ____2_ _ _ _ _ _ 4. Owner Certificate of Authorization (if required) ____N:.:. :A_c____ _ __

5. Commercial Service Date 05/01/73 6. National Board Number for Unit ____N_A_ _ _ _ _ _ _ _ __

7. Components Inspected Manufacturer Component or Manufacturer or Installer State or National Appurtenance or Installer Serial No. Province No. Board No.

Steam Generator Westinghouse Tampa Division 2-RC-E-1A 2971 VA 58226 6817 Steam Generator Westinghouse Tampa D1v1s1on en,:. VA ~!la/ o!ll!l 2-RC*E-1B Steam Generator Westinghouse Tampa Division 2973 VA 58228 6819 2-RC-E-1C Reactor Coolant Westinghouse 494 NA NA Pumn 2-RC-P-1C Excess Letdown Hea Atlas Industrial Manufacturing Exchanger 2-CH-E-4 Company 852 VA 58229 703 Pressurizer Westinghouse Tampa Division 1071 VA 58225 6816 2-RC-E-2 Safety Injection Byron Jackson Pumps, Inc. NA NA NA Pump 2-SI-P-1A _-as Recirc. Spray Byron Jackson Pumps, Inc. NA NA NA Pump 2-RS-P-2A Loop Stop Valve Darling NA NA NA 2-RC-MOV-2592 Class 1/2 Piping Southwest Fabricating Company NA NA NA Class 1/2 Southwest Fabricating Company NA NA NA Component Supports 9609100206 960829 \ PDR ADOCK 05000281 G PDR Note: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8'h in. x I 1 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/BB) This form (E00029) may be obtained from the Order Dept., ASME, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300.

f. (

                                                                                                                                                .. 1' FORM NIS-1 (Back)

8. Examination Dates _ _0_3~/_2_1~/9_5_ _ _ _ _ _ to _ _ _0_6_/_0_7/_9_6_ _ _ __

First Period (5-10 5-10-97)

9. Inspection Period Identification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Thi rd Interval (5-10 5-10-04)

10. Inspection Interval Identification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

11. Applicable Edition of Section XI ___1_9_8_9_ _ _ _ _ _ _ Addenda _N_o_n_e_ _ _ _ _ _ _ __

January 5, 1996, Revision 6

12. Date/Revision of Inspection Plan - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Attachment 1, Pages 1 through 5 of Abstract of Examinat i ans Performed see Attachment 1, Pages through 17 of Abstract of System Pressure Tests

14. Abstract of Results of Examinations and Tests.

See Attachment 1, Examination Summary, Pages 1-3

15. Abstract of Corrective Measures.

See Attachment 1, Examination Summary, Pages 2 and 3 We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section XI. NA NA Certificate of Authorization No. (if applicable) - - - - - - - - - - - Expiration Date - - - - - - - - - - - - 19_~9_6__ Signed Virginia Elect. & Power Co. Owner Byc;kd/~Q CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and theStateorProvinceof Virginia

and employed by Hartford S.B.I. & 1* Co. of Hartford, CT . . . . O , R d
h
d

    - - - - - - - - - - - - - - - have mspected the components descnbed m this wner s eport unng t e peno 3121195                        to       6/7/96                  , and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ___ClJ ____~~'~~--._..__,._- ____ Commissions ~/J-----"l3c...__,_7i--L.......C3:c-3'--+,~l/'~'?_._%~~~3~-- Inspector's Signature National Board, St~te, Province, and Endorsements Date , er; I 'b'. 19 96 l

Attachment 1 Surry Power Station Unit 2 lnservice Inspections Abstract of Examinations

Attachment I Page 2 of 34 Serial No.: 96*310 Docket No.: 50-281 Examination Summary

Virginia Electric and Power Company Surry Power Station Unit 2 1996 Refueling Outage 3rd Interval, 1st Period Introduction This report covers inservice examinations and tests of Class 1 and Class 2 components, piping and component supports that were conducted at Surry Power Station Unit 2 from March 21, 1995 through June 7, 1996. The examinations were conducted to meet the requirements of ASME Section XI, 1989 Edition, of the ASME Boiler and Pressure Vessel Code.

Examination procedures were approved prior to the performance of the examinations. Certification documents relative to personnel, equipment and materials were reviewed and determined to be satisfactory. Inspections, witnessing and surveillance of the examinations and related activities were conducted by personnel from the Hartford Steam Boiler Inspection and Insurance Company, One State Street, Hartford, Connecticut 06102 (Mr. R.L. Coder and Mr. Robert Smith), and Surry technical staff. Limitations Some of the arrangements and details of the piping systems and components were designed and fabricated before the access and examination requirements of ASME Section XI of the 1989 Code could be applied. Consequently, some examinations are limited or not practical due to geometric configuration or accessibility. Generally these limitations exist at fitting to fitting joints, such as elbow to tee, elbow to valve, reducer to valve, and where integrally welded attachments, lugs and supports preclude access to some part of the examination area. These limitations some-times preclude ultrasonic coupling. Page 1 of 3

Attachment I ' ), Page 3 of 34

 .,                                                               Serial No.: 96-310 Docket No.: 50-281 Examinations Examinations were conducted to review as much of the examination zones as was practical within geometric, metallurgical and physical limitations. When the required ultrasonic examination volume or area could not be examined 100%, the examination method was evaluated and alternate beam angles or methods were consid-ered in an attempt to achieve the maximum examination volume.

However, where 100% examination was not possible the examination was considered to be a partial and so noted on the examination report. Where the reduction in coverage was 10% or greater, per Code Case N-460, a subsequent relief request is provided by separate correspondence. Results Examinations of components, piping and component supports result-ed in a total of four (4) items being reported on the basis of procedure reporting criteria. All other examinations and tests are acceptable. A summary of the indications and their dispositions are as follows:

1. Steam generator (cold-leg) manway bolts numbers 30 and 31 was reported as having galled threads. The bolting is Class 1, Category B-G-2, Item B7.30. The bolting was replaced with new bolting. A preservice examination was performed on the new bolting. Per ASME Section XI, IWB-2430 the examina-tions were extended to include the remaining inspection item scheduled for this period and the subsequent period, (period 2). The additional (extended) examinations did not reveal indications exceeding the acceptance standards of Table IWB-3410-1.

2. Heat exchangers 2-RH-E-lA and 2-RH-E-lB were found to be leaking at a flanged connection during the performance of a system pressure test. In accordance with Relief Request 5, bolting nearest the leak was removed, VT-3 inspected, and found to be degraded. All the bolting in these connections was removed and replaced with new material

3. Steam generator 2-RC-E-lC, tube (row) 43 (column) 31 had a through wall indication of 42%. In accordance with Techni-cal Specifications (T.S.) 4.19, the tube was plugged thus removing it from service.

Page 2 of 3

Attachment I

 ' J Page 4 of 34 Serial No.: 96-310 Docket No.: 50-281

4. During power operations prior to refueling shut down, me-chanical snubber 2-MS-MSS-5 was identified to have the snubber pin partially pulled out. The snubber was declared inoperable. The snubber was made operable by re-inserting the pin and installing a new cotter key.

Analytical Evaluation Analytical evaluation(s) of examination results (Volumetric and/or Surface examinations): None required or performed. Evaluation Analyses Evaluation analyses of examination results (Visual Examinations): None required or performed. Statement of Interval Status Virginia Electric and Power Company has completed 99.5 percent of the First Period examinations and 31.2% of the interval examina-

tions.

Page 3 of 3

       )  J Attachment I Page 5 of 34 Serial No.: 96-310 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC & IWF Mark        Line             Sect XI Sect XI  Sect XI  Exam. Exam.

No. No. Class Category Item No. Method Date Remarks 11548-WMKS-0100D1 H001*1 30-SHP-101-601 2A c-c C3.20 Surface 05/15/96 11548-WMKS-0100D1 H001-2 30-SHP-101-601 2A c-c C3.20 Surface 05/15/96 11548-WMKS-0100D1 H002*1 30-SHP-101*601 2A c-c C3.20 surface 05/20/96 11548*WMKS*0100D1 H003-1 30-SHP-101-601 2A C*C C3.20 Surface 05/15/96 11548*WMKS-0100D1 H003-2 30-SHP-101-601 2A c-c C3.20 Surface 05/15/96 11548-WMKS*0103A2-4 1*22BC 30-SHP-122-601 2A C-F-2 C5.81 UT/MT 05/09/96 11548*WMKS-0117A1-1 1-01BC 14-RH-101-1502 1A B-J B9.31 UT/PT 05/08/96 11548-WMKS-0117A1-1 1-05 14-RH-101-1502 1A B-J B9.11 UT/PT 05/08/96 11548-WMKS-0118A2 0-14 6-WAPD-150-601 2A C-F-2 C5.51 UT/MT 05/11/96 11548-WMKS-0122A1 1-01BC 12-RC-324-1502 1A B-J B9.31 UT/PT 05/09/96 11548-WMKS-0122A1 H003-1 12-SI-247-1502 1A B-K B10.20 Surface 05/15/96 11548-WMKS-0122A1 H003-2 12-SI-247-1502 1A B-K B10.20 Surface 05/15/96 11548-WMKS-0122A1 H003-3 12-SI-247-1502 1A B-K B10.20 Surface 05/15/96 ~MKS-0122A1 H003-4 12-SI-247-1502 1A B-K B10.20 Surface 05/15/96 MKS-0122D1 1-12 12-SI-246-1502 1A B-J B9.11 UT/PT 05/16/96 11548-WMKS-0122H1 1-01BC 6-RC-316-1502 1A B-J B9.31 UT/PT 05/08/96 11548-WMKS-0122K1-2 1-12BC 2-SI-281-1502 1A B-J B9.32 PT 05/06/96 11548-WMKS-0122K1-2 1-15 2-SI-281-1502 1A B-J B9.40 PT 05/06/96 11548-WMKS-0122K1-2 1-16 2-SI-281-1502 1A B-J B9.40 PT 05/13/96 11548-WMKS-0122K1-2 1-17 2-SI-281-1502 1A B-J B9.40 PT 05/13/96 11548-WMKS-0122K1-2 1-25 2-SI-281-1502 1A B-J B9.40 PT 05/15/96 11548-WMKS-0122K1-2 1-26 2-SI-281-1502 1A B-J B9.40 PT 05/15/96 11548-WMKS-0122L1 1-05 12-RC-322-1502 1A B-J B9.11 UT 05/07/96 N1 11548-WMKS-0123K1 2-CS-H002 8-CS-133-153 2F F-A F1.40 VT-3 05/06/96 11548-WMKS-0123L1 0-02 12-CS-102-153 2A C-F-1 C5.11 UT/PT 05/05/96 11548-WMKS-0123LZ1 0-02 12-CS-102-153 2A C-F-1 C5.11 UT/PT 05/14/96 11548-WMKS-0123M1 0-03 12-CS-101-153 2A C-F-1 C5.11 UT/PT 05/05/96 11548-WMKS-0123N1Z 0-01 12-RS-107-153 2A C-F-1 C5.11 UT/PT 05/12/96 11548-WMKS-0124A1 1-01DM 6-RC-338-1502 1A B-F B5.40 UT/PT 05/10/96 11548-WMKS-0125A1 2-30 4-RC-315-1502 1A B-J B9.11 UT/PT 05/15/96 p MKS-0125A1 2-34 4-RC-315-1502 1A B-J B9.11 UT/PT 05/22/96 Page 1 of 5

Attachment I J

       '                                                                            Page 6 of 34 Serial No.: 96-310 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC & IWF NUTber 11548*WMKS-0125A1 Hark No.

2-35 Line No. 4-RC-315-1502 Sect XI Class 1A Sect XI Category B-J Sect XI Item No. B9.11 Exam. Method UT/PT Exam. Date 05/05/96 Remarks 11548-WMKS-0125A1 3-05 1-RC-405-1502 1A B-J B9.40 PT 05/09/96 11548-WMKS*0127G1 2-CH-H013 6 11 -CH-318-152 2F F-A F1 .20 VT-3 05/06/96 11548-WMKS-0127J2Z 1-15 2-SI-285-1502 2A C*F-1 C5.30 PT 05/16/96 11548-WMKS-0127J2Z 1-16 2-SI-285-1502 2A C*F-1 C5.30 PT 05/16/96 11548*WMKS-0127J3 1-11 2-SI-275-1502 1A B-J B9.40 PT 05/09/96 11548*WMKS-0127J3 1-12 2-SI-275-1502 1A B-J B9.40 PT 05/09/96 11548-WMKS*CH-11 1-03 3-CH-303-1503 2A C- F* 1 C5.21 UT/PT 05/04/96 11548-WMKS-CH-11 2-03 3-CH-302-1503 2A C- F* 1 C5.21 UT/PT 05/04/96 11548-WMKS*CH-11 2*CH*H004 3-CH-302-1503 2A F-A F1.20 VT-3 05/03/96 11548-WMKS*CH-11 2*CH-H004A 3-CH-302-1503 2A F*A F1 .20 VT-3 05/03/96 11548-WMKS*CH-11 B-01 3-CH-302-1503 2A C*F-1 C5.41 PT 05/03/96 11548-WMKS-CH-11 C-01 3-CH-303-1503 2A C*F-1 C5.41 PT 05/03/96 11548-WMKS-CH-24 0-26 2-CH-321-1503 2A C*F-1 C5.30 PT 05/03/96 MKS-CH-24 0-27 2-CH-321-1503 2A C*F-1 C5.30 PT 05/03/96 1-01BC 3-CH-301-1502 1A B-J B9.32 PT 05/06/96 11548-WMKS-CH-8 1-02 3-CH-301-1502 1A B-J B9.21 PT 05/06/96 11548-WMKS-CH-8 1-03 3-CH-301-1502 1A B-J B9.21 PT 05/06/96 11548-WMKS-CH-8 1-09 3-CH-301-1502 1A B-J B9.21 PT 05/06/96 11548-WMKS-CH-8 1-10 3-CH-301-1502 1A B-J B9.21 PT 05/06/96 11548-WMKS-CH-8 1-11 3-CH-301-1502 1A B-J B9.21 PT 05/06/96 11548-WMKS-CH-8 1-31 3-CH-301-1502 1A B-J B9.21 PT 05/13/96 11548-WMKS*CH-8 1-32 3-CH-301-1502 1A B-J B9.21 PT 05/13/96 11548-WMKS-CH-8 2-21 2-CH-368-1502 1A B-J B9.40 PT 05/17/96 11548-WMKS*CH-8 2-22 2-CH-368-1502 1A B-J B9.40 PT 05/17/96 11548-WMKS*CH-8 2-25BC 2-CH-368-1502 1A B-J B9.32 PT 05/14/96 11548-WMKS*CH-E-3 NIR-06 2-CH*E-3 1A B*D B3. 160 VT-2 06/04/96 11548-WMKS*CH*E-3 NIR-08 2-CH*E-3 1A B-D B3. 160 VT-2 06/04/96 11548-WMKS*CH-E-4 1-01 2-CH-E-4 2A C-A C1.20 UT 05/10/96 011 -10 11 11548-WMKS-CH-E-4 1-02 2-CH-E-4 2A C-A C1 .10 UT 05/10/96 011 -10 11 11548-WMKS-RC-1 1*01BC 3-RC-447-1502 1A B-J B9.32 PT 05/09/96 ~KS-RC-10-1 1-03 29-RC-307-2501R 1A B*J B9.11 UT/PT 05/12/96 p Page 2 of 5

j Attachment I

       '                                                                               Page 7 of 34 Serial No.: 96-310 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC & IWF Mark            Line             Sect XI Sect XI  Sect XI  Exam. Exam.

No. No. Class Category Item No. Method Date Remarks 11548-WMKS-RC-10-1 1-06DM 31-RC-308-2501R 1A B-F B5.70 UT/PT 05/09/96 p 11548-WMKS-RC-1021 1-01BC 2-RC-358-1502 1A B-J B9.32 PT 05/09/96 11548-WMKS-RC-1021 1-18BC 2-RC-359-1502 1A B-J B9.32 PT 05/21/96 11548-WMKS-RC-1021 1-20 2-RC-359-1502 1A B-J B9.40 PT 05/21/96 11548-WMKS-RC-1021 1-21 2-RC-359-1502 1A B-J B9.40 PT 05/21/96 11548-WMKS-RC-1021 1-22 2-RC-359-1502 1A B-J B9.40 PT 05/21/96 11548-WMKS-RC-1022 2-27 2-RC-356-1502 1A B-J B9.40 PT 05/17/96 11548-WMKS-RC-1022 2-28 2-RC-356-1502 1A B-J B9.40 PT 05/19/96 11548-WMKS-RC-1022 2-31 2-RC-353-1502 1A B-J B9.40 PT 05/19/96 11548-WMKS-RC-1022 2-32 2-RC-353-1502 1A B-J B9.40 PT 05/19/96 11548-WMKS-RC-1022 2-45 2-RC-353-1502 1A B-J B9.40 PT 05/13/96 11548-WMKS-RC-1022 2-46 2-RC-353-1502 1A B-J B9.40 PT 05/17/96 11548-WMKS-RC-1022 3-32 2-RC-358-1502 1A B-J B9.40 PT 05/16/96 11548-WMKS-RC-1022 3-33 2-RC-358-1502 1A B-J B9.40 PT 05/16/96 ~KS-RC-1022 3-34 2-RC-358-1502 1A B-J B9.40 PT 05/16/96 MKS-RC-1022 3-35 2-RC-358-1502 1A B-J B9.40 PT 05/16/96 11548-WMKS-RC-1022 3-40 2-RC-358-1502 1A B-J B9.40 PT 05/16/96 11548-WMKS-RC-1022 3-41 2-RC-358-1502 1A B-J B9.40 PT 05/16/96 11548-WMKS-RC-1022 3-42 2-RC-358-1502 1A B-J B9.40 PT 05/17/96 11548-WMKS-RC-1023 1-03 2-RC-500-1502 1A B-J B9.40 PT 05/21/96 11548-WMKS-RC-1023 2-RC-H001 2-RC-500-1502 1A F-A F1.40 VT-1 05/06/96 11548-WMKS-RC-1024 1-04 2-CH-393-1502 1A B-J B9.40 PT 05/13/96 11548-WMKS-RC-12-1 1-05DM 29-RC-301-2501R 1A B-F B5.70 UT/PT 05/08/96 p 11548-WMKS-RC-1225 2-CH-H001 2-CH-397-1502 1A F-A F1 .10 VT-3 05/06/96 A1 11548-WMKS-RC-6 1-01 8-RC-311-2501R 1A B-J B9.11 UT/PT 05/08/96 11548-WMKS-RC-E-1A.1 CL-MANWAY 2-RC-E-1A 1A B-G-2 B7.30 VT-1 05/14/96 F1 11548-WMKS-RC-E-1A.1 HL-MANWAY 2-RC-E-1A 1A B-G-2 B7.30 VT-1 05/14/96 11548-WMKS-RC-E-1A.2 2-RC-2-01CNIR 2-RC-E-1A 2A C-B C2.22 UT 05/10/96 011 -33 11 11548-WMKS-RC-E-1A.2 2-RC-2-01DNIR 2-RC-E-1A 2A C-B C2.22 UT 05/09/96 011 -16 11 11548-WMKS-RC-E-1B.1 CL-MANWAY 2-RC-E-1B 1A 8-G-2 87.30 VT-1 05/04/96 E1 11548-WMKS-RC-E-1B.1 HL-MANWAY 2-RC-E-18 1A 8-G-2 87.30 VT-1 05/04/96 E1 ~MKS-RC-E-18.2 2-09 2-RC-E-18 ZA C-8 C2.21 UT/MT 05/09/96 011 -16 11 Page 3 of 5

       .   ,                                                                              Attachment I Page 8 of 34 Serial No.: 96-310 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC & IWF Mark            Line              Sect XI Sect XI  Sect XI  Exam_   Exam_

No_ No_ Class Category Item No. Method Date Remarks 11548-WMKS*RC*E*1B.2 2-10 2*RC*E-1B 2A C*B C2.21 UT/MT 05/13/96 011 -33 11 11548-WMKS*RC-E-2 1-03 2-RC-E-2 1A B-B B2.12 UT 05/08/96 011 -6 11 11548-WMKS*RC-E-2 1-04 2-RC-E-2 1A B*B B2.11 UT 05/08/96 011 -145 11 11548-WMKS*RC-E-2 1-08 2-RC*E-2 1A B-K B10.10 Surface 05/08/96 011 -96 11 11548-WMKS*RC*E-2 10NIR 2-RC-E-2 1A B*D B3. 120 UT 05/07/96 p 11548-WMKS*RC-E-2 11NIR 2-RC-E-2 1A B*D B3.120 UT 05/07/96 p 11548*WMKS-RC-MOV2592 2-RC*MOV-2592 29-RC-304-2501R 1A B-M-2 B12.50 VT-3 05/18/96 11548-WMKS-RC*MOV2592 FLANGE 29-RC-304-2501R 1A B-G-1 B6.220 VT-1 05/18/96 11548-WMKS*RC*P*1C.2 LSHB 2*RC-P-1C 1A B-G-2 87.60 VT-1 05/09/96 11548-WMKS*RS-P*2A 2-05 2-RS-P-2A 2A C-G C6.10 Surface 05/06/96 011 -25 11 11548-WMKS*RS*P*2A 2-06 2-RS*P-2A 2A C*G C6.10 Surface 05/06/96 011 -25 11 11548-WMKS*SI-1 0-16 12-SI-202-153 2A C-F-1 cs .11 UT/PT 05/12/96 11548-WMKS*SI-10 0-08 3-SI-270-1503 2A C*F-1 C5.21 UT/PT 05/05/96 115 8-WMKS-SI-10 0-11 3-SI-270-1503 2A C-F-1 C5.21 UT/PT 05/06/96 MKS*SI-10 0-12 3-SI-270-1503 2A C-F-1 C5.21 UT/PT 05/06/96 11548-WMKS*SI-11 2*SI*H091 3-SI-272-1503 2A F*A F1.20 VT-3 05/06/96 11548-WMKS*SI-12A 2*SI*H005 3-SI-346-1503 2A F*A F1.20 VT-3 05/06/96 11548-WMKS*SI-2 1-11 3-SI-270-1503 2A C-F-1 C5.21 UT/PT 05/10/96 11548-WMKS*SI-2 1-12 3-SI-270-1503 2A C-F-1 C5.21 UT 05/10/96 N1 11548-WMKS*SI-2 2-33 2-SI-276-1503 2A C*F-1 C5.30 PT 05/15/96 11548-WMKS*SI-2 2-34 2-SI-276-1503 2A C*F-1 C5.30 PT 05/15/96 11548-WMKS*SI-3 1-17 3-SI-272-1503 1A 8-J 89.21 PT 05/16/96 11548-WMKS-SI-35 1-14 2-SI-274-1502 2A C*F-1 C5.30 PT 05/11/96 11548-WMKS-S!-35 1-16 2-SI-274-1502 2A C-F-1 C5.30 PT 05/16/96 11548-WMKS*SI *36 1-42 2-SI-277-1503 1A 8-J 89.40 PT 05/15/95 11548-WMKS-SI-4 0-15 12-SI-205-153 2A C-F-1 C5.11 UT/PT 05/08/96 11548-WMKS*SI-7 0-03 3-SI *257-1503 2A C-F-1 C5.21 UT/PT 05/05/96 11548-WMKS*SI-7 0-04 3-SI-257-1503 2A C*F-1 C5.21 UT/PT 05/05/96 11548-WMKS*SI*P-1A 2-05 2*Sl *P*1A 2A C*G C6.10 Surface 05/06/96 011 -25 11 11548-WMKS-SI*P*1A 2-06 2-SI*P-1A 2A C-G C6.10 Surface 05/06/96 011 -10 11 P

Page 4 of 5

Attachment I Page 9 of 34 Serial No.: 96-310 Docket No.: 50-281 Abstract of Examinations Performed IWB, IWC &: IWF Nuiber Mark No. Line No_ Sect XI Class Sect XI Category Sect XI Item No. Exam_ Method Exam_ Date Remarks Remarks Code: A1: Reexamination of a component that required corrective measures during a previous examination. E1: Extended examinations performed due to indications on 02-RC-E-1A cold-leg manway bolts. F1: Component exhibited indications exceeding the acceptance standards of Table IWB-3410-1, was replaced, replaced component passed preservice examination, examination was extended to include additional examinations. N1: Surface examination completed and reported during the 1995 refueling outage. The volumetric examination was performed during this refueling (1996) outage. P: Partial examination, (reduction in coverage is greater than 10% as allowed by Code Case N-460) relief is being requested by separate correspondence. Correction: Reference Virginia Power letter 95-168, dated 6-7-95. Weld 2-05 (shown on drawing 11548-WMKS-CH-11) was reported as a partial examination in error. Weld 2-04 (shown on drawing 11548-WMKS-CH-11) does have a partial examination history. Both welds 2-04 and 2-05 were re-examined and it was determined that the weld numbers were reversed. Therefore, weld 2-04 has been removed from the plan and will be-replaced with a similar weld. Page 5 of 5

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 1-SPM-09DC-1-1D CONTAINMENT VACUUM PUMP 11811 2 C-H C7.3D 05/08/96 1-SPM-090C-1-10 CONTAINMENT VACUUM PUMP "8" 2 C-H C7.70 05/08/96 1-SPM-090C-1-6 POST ACCIDENT GASEOUS WASTE SAMPLE 2 C-H c7.30 05/10/96 1-SPM-090C-1-6 POST ACCIDENT GASEOUS WASTE SAMPLE 2 C-H C7.70 05/10/96 1-SPM-090C-1-7 HYDROGEN ANALYZER 103 RETURN LINE 2 C-H C7.30 05/20/96 1-SPM-090C-1-7 HYDROGEN ANALYZER 103 RETURN LINE 2 C-H C7.70 05/20/96 1-SPM-090C-1-8 HYDROGEN ANALYZER 203 RETURN LINE 2 C-H c7.30 05/18/96 1-SPM-090C-1-8 HYDROGEN ANALYZER 203 RETURN LINE 2 C-H c7.70 05/18/96 1-SPM-090C-1-9 CONTAINMENT VACUUM PUMP 11A11 2 C-H C7.30 05/07/96 1-SPM-090C-1-9 CONTAINMENT VACUUM PUMP 11A11 2 C-H c7.70 05/07/96 2-SPB-006A-1-1 CONTAINMENT PURGE AIR SUPPLY 2 C-H C7.30 05/03/96 2-SPB-006A-1-1 CONTAINMENT PURGE AIR SUPPLY 2 C-H C7.70 05/03/96 2-SPB-006A-1-2 CONTAINMENT PURGE AIR EXHAUST 2 C-H C7.30 05/03/96 2-SPB-006A-1-2 CONTAINMENT PURGE AIR EXHAUST 2 C-H C7.70 05/03/96 2-SPM-064A-1-1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C7.30 01/25/96 2-SPM-064A-1-1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H c7.70 01/25/96 2-SPM-064A-1-2 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C-H c7.30 01/25/96 MISC. STEAM TRAP LINES 2-SPM-064A-1-2 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C-H c7.70 01/25/96 MISC. STEAM TRAP LINES O<n"'U)> OC'DIDrt 2-SPM-064A-1-3 A S/G MAIN STEAM INSIDE CTMT 2 C-H C7.10 11/21/95 r,-,(Qrt A _., CD D.> (1) OJ n rtr--::::r 03 Page 1 of 17 zz (1) 0 0 0 :, U1 -0 ""'

                                                                                                      ?':'

NvJ O)~

~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-064A-1-3 A S/G MAIN STEAM I NS IDE CTMT 2 C-H C?.30 11/21/95 2-SPM-064A-1-3 A S/G MAIN STEAM I NS IDE CTMT 2 C-H C?.70 11/21/95 2-SPM-064A-2-1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C?.30 01/25/96 2-SPM-064A*2*1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C*H C?.70 01/25/96 2-SPM-064A*2*2 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C-H C?.30 01/25/96 MISC. STEAM TRAP LINES 2-SPM-064A*2*2 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C*H c?.70 01/25/96 MISC. STEAM TRAP LINES 2-SPM-064A-2*3 B S/G MAIN STEAM I NS IDE CTMT 2 C-H C7 .10 11/21/95 2-SPM-064A*2-3 B S/G MAIN STEAM INSIDE CTMT 2 C*H c?.30 11/21/95 2-SPM-064A*2-3 B S/G MAIN STEAM INSIDE CTMT 2 C*H C?.70 11/21/95 2-SPM-064A*3-1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C?.30 01/25/96 2-SPM-064A*3-1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C?.70 01/25/96 2-SPM-064A*3-2 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C-H C?.30 01/25/96 MISC. STEAM TRAP LINES 2-SPM-064A*3-2 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C-H C?.70 01/25/96 MISC. STEAM TRAP LINES 2-SPM-064A-3*3 C S/G MAIN STEAM I NS IDE CTMT 2 C-H c?.10 11/21/95 2-SPM-064A-3*3 C S/G MAIN STEAM I NS IDE CTMT 2 C-H C?.30 11/21/95 2-SPM-064A-3-3 C S/G MAIN STEAM I NS IDE CTMT 2 C-H C?.70 11/21/95 2-SPM-064A-4*1 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C-H C?.30 01/25/96 MISC. STEAM TRAP LINES 2-SPM-064A*4*1 MAIN STEAM LINES TO AUX S/G FEEDWATER PUMP AND 2 C*H C?.70 01/25/96 O<n"Ul> OCDD.>rt MISC. STEAM TRAP LINES 0 I CC t"T A ..... *CDC> Cl) ID

                                                                                                     ,-t , - ....:a.

n

r

                                                                                                                 ~3 Page 2 of 17                            z z:            Cl) 0    0       0 ::J
                                                                                                                  -h ....
                                                                                                                  ~~
                                                                                                     \11 00,
                                                                                                          '° ~

N~' ' co~

~a

l Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-064A-4-3 TERRY TURBINE AND CONNECTING PIPE 2 C-H c7.30 04/01/96 2-SPM-064A-4-3 TERRY TURBINE AND CONNECTING PIPE 2 C-H C7.70 04/01/96 2-SPM-0648-1-1 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C7.30 01/25/96 2-SPM-0648-1-1 A,B &C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C7.70 01/25/96 2-SPM-0648-1-2 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H c7.30 01/25/96 2-SPM-064B-1-2 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C7.70 01/25/96 2-SPM-0648-1-3 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C7.30 01/25/96 2-SPM-D64B-1-3 A,B & C S/G MAIN STEAM OUTSIDE CTMT 2 C-H C7.70 01/25/96 2-SPM-066A-2-1 CONDENSER AIR EJECTOR DIVERT TO CONTAINMENT 2 C-H C7.30 05/27/96 2-SPM-066A-2-1 CONDENSER AIR EJECTOR DIVERT TO CONTAINMENT 2 C-H c7.70 05/27/96 2-SPM-068A-1-1 MAIN FEEDWATER TO "A" S/G 2 C-H C7.30 11/21/95 2-SPM-068A-1-1 MAIN FEEDWATER TO "A" S/G 2 C-H c7.70 11/21/95 2-SPM-068A-1-2 MAIN FEEDWATER TO "B" S/G 2 C-H C7.30 11/21/95 2-SPM-068A-1-2 MAIN FEEDWATER TO "B" S/G 2 C-H c7.70 11/21/95 2-SPM-068A-1-3 MAIN FEEDWATER TO "C" S/G 2 C-H C7.30 11/21/95 2-SPM-068A-1-3 MAIN FEEDWATER TO "C" S/G 2 C-H C7.70 11/21/95 2-SPM-068A-1-4 AUX. FEEDWATER HEADERS 2 C-H c7.30 06/01/96 2-SPM-068A-1-4 AUX. FEEDWATER HEADERS 2 C-H c7.70 06/01/96 2-SPM-068A-1-5 FEEDWATER CROSS CONNECT FROM UNIT 2 C-H C7.30 06/01/96 2-SPM-068A-1-5 FEEDWATER CROSS CONNECT FROM UNIT 2 C-H c7.70 06/01/96 o en ""U :x:,, OCDD>rt 2-SPM-075B-2-1 INSTRUMENT AIR PENETRATION #47 2 C-H c7.30 05/26/96 o,<art ro a,* (1) a, n rt r - _:a, :::r N3 Page 3 of 17 zz (1) 0 0 0 ::S

                                                                                                         -+, ....

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-0756-2-1 INSTRUMENT AIR PENETRATION #47 2 C-H c7.70 05/26/96 2-SPM-0756-2-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.30 05/07/96 2-SPM-075B-2-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.70 05/07/96 2-SPM-075C-1-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.30 05/26/96 2-SPM-075C-1-1 INSTRUMENT AIR PENETRATION #47 2 C-H C7.70 05/26/96 2-SPM-075C-1-2 INSTRUMENT AIR PENETRATION #58 2 C-H C7.30 05/07/96 2-SPM-075C-1-2 INSTRUMENT AIR PENETRATION #58 2 C-H c7.70 05/07/96 2-SPM-082A-2-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-082A-2-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-082A-2-2 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-082A-2-2 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-082A-2-3 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-082A-2-3 REACTOR COOLANT SYSTEM B-P B15. 70 06/04/96 2-SPM-082A-2-4 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-082A-2-4 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-082A-2-5 RESIDUAL HEAT REMOVAL/SAMPLE 2 C-H C7.30 05/10/96 2-SPM-082A-2-5 RESIDUAL HEAT REMOVAL/SAMPLE 2 C-H C7.70 05/10/96 2-SPM-082A-2-6 PRESSURIZER RELIEF TANK SAMPLE 2 C-H c7.30 05/19/96 2-SPM-082A-2-6 PRESSURIZER RELIEF TANK SAMPLE 2 C-H c7.70 05/19/96 2-SPM-082A-2-7 RESIDUAL HEAT REMOVAL PIPING 2 C-H c7.30 05/22/96 c,u,-,:,;i,, O CD m r+ 2-SPM-082A-2-7 RESIDUAL HEAT REMOVAL PIPING 2 C-H c7.70 05/22/96 0"'1(Cr-t A ..J, fD ID Cl)

                                                                                               ,-t OJ        n
                                                                                                   ,-- --lt.:J""

vJ3 Page 4 of 17 zz 0 0 0 Cl)

J

                                                                                                        -+, ...

vJ-V1 '{) ~ 00-NIJJ ex,~

~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-083A-1-1 CONTAINMENT SUMP PUMP DISCHARGE 2 C-H c7.30 05/15/96 2-SPM-083A-1-1 CONTAINMENT SUMP PUMP DISCHARGE 2 C-H C7.70 05/15/96 2-SPM-083A-2-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H C7.30 05/08/96 2-SPM-083A-2-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H c7.70 05/08/96 2-SPM-083B-1-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H C7.30 05/08/96 2-SPM-0838-1-2 PRIMARY DRAIN TRANSFER PUMP DISCHARGE 2 C-H c7.70 05/08/96 2-SPM-0838-3-2 HRSS WASTE TANK PUMP DISCHARGE 2 C-H C7.30 05/15/96 2-SPM-0838-3-2 HRSS WASTE TANK PUMP DISCHARGE 2 C-H C7.70 05/15/96 2-SPM-0838-3-3 CONTAINMENT SUMP PUMP DISCHARGE 2 C-H C7.30 05/15/96 2-SPM-0838-3-3 CONTAINMENT SUMP PUMP DISCHARGE 2 C-H C7.70 05/15/96 2-SPM-084A-1-3 DISCHARGE INTO RWST FROM SI PUMPS 2 C-H c7.30 04/28/96 2-SPM-084A-1-3 DISCHARGE INTO RWST FROM SI PUMPS 2 C-H C7.70 04/28/96 2-SPM-084A-2-4 "A" TRAIN CONTAINMENT SPRAY PENETRATION PIPING 2 C-H C7.30 05/09/96 2-SPM-084A-2-4 11A11 TRAIN CONTAINMENT SPRAY PENETRATION PIPING 2 C-H C?.70 05/09/96 2-SPM-084A-2-5 "8" TRAIN CONTAINMENT SPRAY PENETRATION PIPING 2 C-H c7.30 05/09/96 2-SPM-084A-2-5 "8" TRAIN CONTAINMENT SPRAY PENETRATION PIPING 2 C-H C7.70 05/09/96 2-SPM-0848-1-3 "8" INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.30 05/17/96 2-SPM-0848-1-3 11811 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.50 05/17/96 2-SPM-0848-1-3 "8" INSIDE RECIRCULATION SPRAY PUMP 2 C-H c7.70 05/17/96 2-SPM-0848-1-4 11A11 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.30 05/22/96 OUl-U:t> O CD OJ r+ 2-SPM-0848-1-4 "A" INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.50 05/22/96 o,ccr+ A _., CD DJ (1) D> n rtr--::r

                                                                                                               ~3 Page 5 of 17                            zz o o a (1)

J

                                                                                                               -h rt l.n ,0 vJ
                                                                                                               ~

00-NvJ o,~

~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-084B-1-4 11 A11 INSIDE RECIRCULATION SPRAY PUMP 2 C-H C7.70 05/22/96 2-SPM-084B-2-1 OUTSIDE RECIRCULATION SPRAY PUMP SUCTION PIPING 2 C-H C7.30 05/20/96 FROM CONTAINMENT SUMP 2-SPM-084B-2-1 OUTSIDE RECIRCULATION SPRAY PUMP SUCTION PIPING 2 C-H C7.70 05/20/96 FROM CONTAINMENT SUMP 2-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP 2-RS-P-2A 2 C-H C7.30 05/30/96 2-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP 2-RS-P-2A 2 C-H C7.50 05/30/96 2-SPM-084B-2-2 OUTSIDE RECIRCULATION SPRAY PUMP 2-RS-P-2A 2 C-H C7.70 05/30/96 2-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP 2-RS-P-2B 2 C-H C7.30 05/3D/96 2-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP 2-RS-P-2B 2 C-H C7.50 05/30/96 2-SPM-084B-2-3 OUTSIDE RECIRCULATION SPRAY PUMP 2-RS-P-2B 2 C-H C7.70 05/30/96 2-SPM-084B-2-4 OSRS 11911 TRAIN PENETRATION PIPING 2 C-H C7.30 05/09/96 2-SPM-084B-2-4 OSRS 11911 TRAIN PENETRATION PIPING 2 C-H C7.70 05/09/96 2-SPM-084B-2-5 OSRS "A" TRAIN PENETRATION PIPING 2 C-H C7.30 05/27/96 2-SPM-084B-2-5 OSRS 11A11 TRAIN PENETRATION PIPING 2 C-H C7.70 05/27/96 2-SPM-085A-1-3 CONTAINMENT VACUUM EJECTOR 2 C-H C7.30 05/31/96 2-SPM-085A-1-3 CONTAINMENT VACUUM EJECTOR 2 C-H C7.70 05/31/96 2-SPM-085A-2-1 CONTAINMENT VACUUM PUMP "B" 2 C-H C7.30 05/08/96 2-SPM-085A-2-1 CONTAINMENT VACUUM PUMP 11911 2 C-H C7.70 05/08/96 2-SPM-085A-2-2 CONTAINMENT VACUUM PUMP IIAII 2 C-H C7.30 05/07/96 2-SPM-085A-2-2 CONTAINMENT VACUUM PUMP "A" 2 C-H C7.70 05/07/96 OUl-O:> 2-SPM-086A-1-1 REACTOR COOLANT SYSTEM B-P B15.30 06/04/96 Oct>Olrt o,tcrt 7' ..... *CDOJ (1) DJ n rt ,- -lo ::r U13 Page 6 of 17 z: z: 0 0 0 (1)

                                                                                                                 --h rt w-U1 00,
                                                                                                          '° .i:-

NvJ o,~

~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-086A-1-1 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-1-1 REACTOR COOLANT SYSTEM 8-P 815.60 06/04/96 2-SPM-086A-1-1 REACTOR COOLANT SYSTEM 8-P 815.70 06/04/96 2-SPM-086A-1-2 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-1-2 REACTOR COOLANT SYSTEM 8-P 815. 70 06/04/96 2-SPM-086A-1-3 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-1-3 REACTOR COOLANT SYSTEM 8-P 815. 70 06/04/96 2-SPM-086A-1-4 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-1-4 REACTOR COOLANT SYSTEM 8-P 815.70 06/04/96 2-SPM-086A-1-5 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-1-5 REACTOR COOLANT SYSTEM 8-P 815. 70 06/04/96 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM 8-P 815.30 06/04/96 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM 8-P 815.60 06/04/96 2-SPM-086A-2-1 REACTOR COOLANT SYSTEM 8-P 815.70 06/04/96 2-SPM-086A-2-2 REACTOR COOLANT SYSTEM 8-P 815.30 06/04/96 2-SPM-086A-2-2 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-2-3 REACTOR COOLANT SYSTEM B-P 815.30 06/04/96 2-SPM-086A-2-3 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-086A-2-4 REACTOR COOLANT SYSTEM 8-P 815.30 06/04/96 C,U)-C,)> 0(1)D>rt 2-SPM-086A-2-4 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 0 -, (Q rt A_., (D 0, CD ID () rt r - - ::r 0-3 Page 7 of 17 zz 0 0 0 CD

                                                                                                  -h rt U1  '° vJ
                                                                                                  ~
                                                                                          '7' '?'

NvJ cc~

~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-086A-2-5 REACTOR COOLANT SYSTEM B-P B15.30 06/04/96 2-SPM-086A-2-5 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.10 06/04/96 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.30 06/04/96 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM B-P B15.60 06/04/96 2-SPM-086A-3-1 REACTOR COOLANT SYSTEM 8-P B15.70 06/04/96 2-SPM-086A-3-2 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-2 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086A-3-3 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-3 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086A-3-4 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-4 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086A-3-5 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-5 REACTOR COOLANT SYSTEM B-P B15 .70 06/04/96 2-SPM-086A-3-6 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086A-3-6 REACTOR COOLANT SYSTEM B-P B15. 70 06/04/96 2-SPM-0866-1-1 REACTOR COOLANT SYSTEM B-P B15.20 06/04/96 2-SPM-086B-1-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086B-1-1 REACTOR COOLANT SYSTEM B-P B15. 70 06/04/96 CJ(/) -0 :ti, 2-SPM-086B-1-2 REACTOR COOLANT SYSTEM 8-P B15.50 06/04/96 ommrt OICCrt A-"*Cl> W CD OJ (") rtr--=r

                                                                                                    -...13 Page 8 of 17                              zz           CD 0   0   0 :,
                                                                                                    -+, rt l/1 '()

w-

C) °' Nvl ex,~

~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-086B-1-2 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086B-1-3 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086B-1-3 REACTOR COOLANT SYSTEM B-P B15 .70 06/04/96 2-SPM-086B-1-4 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086B-1-4 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086B-2-1 PRIMARY GRADE WATER INTO CONTAINMENT 2 C-H c?.30 05/16/96 2-SPM-086B-2-1 PRIMARY GRADE WATER INTO CONTAINMENT 2 C-H C?.70 05/16/96 2-SPM-086C-1-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086C-1-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086C-1-2 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086C-1-2 REACTOR COOLANT SYSTEM . B-P B15.50 06/04/96 2-SPM-086C-1-3 RVLIS TRAIN "A" INSIDE CTMT 2 C-H C?.30 06/04/96 2-SPM-086C-1-3 RVLIS TRAIN IIAII INSIDE CTMT 2 C-H c?.70 06/04/96 2-SPM-086C-1-5 RVLIS TRAIN 11811 INSIDE CTMT 2 C-H C?.30 06/04/96 2-SPM-086C-1-5 . RVLIS TRAIN 11811 I NS IDE CTMT 2 C-H c?.70 06/04/96 2-SPM-086C-2-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-086C-2-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-086C-2-2 RVLIS TRAIN "B" INSIDE CTMT 2 C-H c?.30 06/04/96 2-SPM-086C-2-2 RVLIS TRAIN 11911 INSIDE CTMT 2 C-H c?.70 06/04/96 2-SPM-087A-1-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 oOCDD>rt en " :,:, 2-SPM-087A-1-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 0 , c.c r+ A_., CO m (1) rt --:r3 a, 00 0 Page 9 of 17 zz 0 0 0 (1)

J

                                                                                                           -h rt U1 '() .,,..
                                                                                                    ?er' Nvl oo~
                                                                                                    ~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-087A-1-2 RESIDUAL HEAT REMOVAL PIPING 2 C-H C?.30 05/22/96 2-SPM-087A-1-2 RESIDUAL HEAT REMOVAL PIPING 2 C-H C?.70 05/22/96 2-SPM-087A-1-3 2-RH-P-1A 2 C-H C?.10 05/11/96 2-SPM-087A-1-3 2-RH-P-1A 2 C-H c?.30 05/11/96 2-SPM-087A-1-3 2-RH-P-1A 2 C-H c?.50 05/11/96 2-SPM-087A-1-3 2-RH-P-1A 2 C-H C?.70 05/11/96 2-SPM-087A-1-4 2-RH-P-1B 2 C-H c?.10 05/11/96 2-SPM-087A-1-4 2-RH-P-1B 2 C-H C?.30 05/11/96 2-SPM-087A-1-4 2-RH-P-1B 2 C-H c?.50 05/11/96 2-SPM-087A-1-4 2-RH-P-1B 2 C-H C?.70 05/11/96 2-SPM-087A-2-1 RESIDUAL HEAT REMOVAL PIPING 2 C-H C? .10 05/22/96 2-SPM-087A-2-1 RESIDUAL HEAT REMOVAL PIPING 2 C-H C?.30 05/22/96 2-SPM-087A-2-1 RESIDUAL HEAT REMOVAL PIPING 2 C-H c?.70 05/22/96 2-SPM-087A-2-2 RHR TO RWST PIPING 2 C-H c?.30 05/14/96 2-SPM-087A-2-2 RHR TO RWST PIPING 2 C-H c?.70 05/14/96 2-SPM-087A-2-3 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-087A-2-3 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-087A-2-4 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-087A-2-4 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-087A-2-5 LETDOWN HEADER 2 C-H C?.30 05/03/96 C'<n""C)> 2-SPM-087A-2-5 LETDOWN HEADER 2 C-H c?.70 05/03/96 0 0 C'D ID rt

                                                                                                   -, C.C rt A_., ct> o.,

(1) a, C"l rtr-~:::r Page 10 of 17 z: z: 0 0

                                                                                                       '° :J 0

3 (1)

                                                                                                       -+, ....

1.11 00- '° +'w-NW' ' o,~

~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-D88A-2-1 LETDOWN HEADER 2 C-H C7.30 05/03/96 2-SPM-D88A-2-1 LETDOWN HEADER 2 C-H C7.70 05/03/96 2-SPM-0888-1-1 DISCHARGE INTO RWST FROM SI PUMPS 2 C-H C7.30 04/28/96 2-SPM-0888-1-1 DISCHARGE INTO RWST FROM SI PUMPS 2 C-H C7.70 04/28/96 2-SPM-0888-1-10 MISC CHARGING 2-CH-220 2 C-H C7.30 05/04/96 2-SPM-0888-1-10 MISC CHARGING 2-CH-220 2 C-H C7.70 05/04/96 2-SPM-0888-1-2 SEAL RETURN HEADER 2 C-H C7.30 05/03/96 2-SPM-0888-1-2 SEAL RETURN HEADER 2 C-H C7.70 05/03/96 2-SPM-0888-1-6 MISC CHARGING 2-CH-228 2 C-H C7.30 04/30/96 2-SPM-0888-1-6 MISC CHARGING 2-CH-228 2 C-H C7.70 04/30/96 2-SPM-0888-1-7 MISC CHARGING 2-CH-FCV-2114A 2 C-H C7.30 04/30/96 2-SPM-0888-1-7 MISC CHARGING 2-CH-FCV-2114A 2 C-H C7.70 04/30/96 2-SPM-0888-1-8 MISC CHARGING 2-CH-MOV-2350 2 C-H C7.30 04/30/96 2-SPM-0888-1-8 MISC CHARGING 2-CH-MOV-2350 2 C-H C7.70 04/30/96 2-SPM-0888-1-9 MISC CHARGING 2-CH-218 2 C-H C7.30 04/30/96 2-SPM-0888-1-9 MISC CHARGING 2-CH-218 2 C-H C7.70 04/30/96 2-SPM-088C-1-1 REACTOR COOLANT SYSTEM B-P 815.50 06/04/96 2-SPM-088C-1-1 REACTOR COOLANT SYSTEM 8-P 815.70 06/04/96 2-SPM-088C-1-2 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-088C-1-2 REACTOR COOLANT SYSTEM B-P 815.70 06/04/96 CJ(/) '"t1 l> 0 (() OJ rt 2-SPM-088C-1-3 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 Ol(CM' A-"*CDD> (1) D> (") r-t-N::::r 03 Page 11 of 17 zz (1) 0 0 0 ::J

                                                                                                        .... rt w-1.n 0
                                                                                                     '° 0-
                                                                                                        -1'-

NIJJ oo~

~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-088C-1-3 REACTOR COOLANT SYSTEM 8-P 815.70 06/04/96 2-SPM-088C-1-5 CHARGING TO REGENERATIVE HEAT EXCHANGER 2 C-H c7.30 05/03/96 2-SPM-088C-1-5 CHARGING TO REGENERATIVE HEAT EXCHANGER 2 C-H C7.70 05/03/96 2-SPM-088C-1-6 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-088C-1-6 REACTOR COOLANT SYSTEM 8-P 815.40 06/04/96 2-SPM-088C-1-6 REACTOR COOLANT SYSTEM 8-P 815 .70 06/04/96 2-SPM-088C-1-7 SEAL RETURN HEADER 2 C-H c7.30 05/03/96 2-SPM-088C-1-7 SEAL RETURN HEADER 2 C-H C7.70 05/03/96 2-SPM-088C-1-9 LETDOWN HEADER 2 C-H C7 .10 05/03/96 2-SPM-088C-1-9 LETDOWN HEADER 2 C-H C7.30 05/03/96 2-SPM-088C-1-9 LETDOWN HEADER 2 C-H C7.70 05/03/96 2-SPM-088C-2-2 SEAL RETURN HEADER 2 C-H c7.30 05/03/96 2-SPM-088C-2-2 SEAL RETURN HEADER 2 C-H C7.70 05/03/96 2-SPM-088C-2-3 REACTOR COOLANT PUMP SEAL INJECTION LINES 2 C-H c7.30 05/03/96 2-SPM-088C-2-3 REACTOR COOLANT PUMP SEAL INJECTION LINES 2 C-H C7.70 05/03/96 2-SPM-088C-2-4 REACTOR COOLANT PUMP 11A11 SEAL RETURN LINE 2 C-H C7 .30 05/03/96 2-SPM-088C-2-4 REACTOR COOLANT PUMP "A" SEAL RETURN LINE 2 C-H C7.70 05/03/96 2-SPM-088C-2-5 REACTOR COOLANT PUMP 11911 SEAL RETURN LINE 2 C-H c7.30 05/03/96 2-SPM-088C-2-5 REACTOR COOLANT PUMP 11g11 SEAL RETURN LINE 2 C-H C7.70 05/03/96 2-SPM-088C-2-6 REACTOR COOLANT PUMP 11c11 SEAL RETURN LINE 2 C-H c7.30 05/03/96 Ocn"U)> 2-SPM-088C-2-6 REACTOR COOLANT PUMP 11c11 SEAL RETURN LINE 2 C-H c7.70 05/03/96 OCDCllrt Oltcf"'t A...,*CDO>

                                                                                                     <D OJ       0 rtr-N:::J'"
                                                                                                            ~3 Page 12 of 17                              zz          <D o a o :,

V1 DO-

                                                                                                        '° v J -
                                                                                                            -I>-

Nl,J oo~

~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-088C-2-8 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-088C-2-8 REACTOR COOLANT SYSTEM B-P B15.60 06/04/96 2-SPM-088C-2-8 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-089A-1-1 LOW HEAD SAFETY INJECTION PUMP 11 1A 11 2 C-H C7.30 04/28/96 2-SPM-089A-1-1 LOW HEAD SAFETY INJECT ION PUMP 11 1A" 2 C-H C7.50 04/28/96 2-SPM-089A-1-1 LOW HEAD SAFETY INJECT ION PUMP "1A" 2 C-H c7.70 04/28/96 2-SPM-089A-1-2 LOW HEAD SAFETY INJECTION PUMP 11 18 11 2 C-H C?.30 04/28/96 2-SPM-089A-1-2 LOW HEAD SAFETY INJECTION PUMP 11 18 11 2 C-H C7.50 04/28/96 2-SPM-089A-1-2 LOW HEAD SAFETY INJECTION PUMP 11 18 11 2 C-H C7.70 04/28/96 2-SPM-089A-1-3 LHSI PUMP SUCTION PIPING FROM CONTAINMENT SUMP 2 C-H c?.30 05/20/96 2-SPM-089A-1-3 LHSI PUMP SUCTION PIPING FROM CONTAINMENT SUMP 2 C-H C?.70 05/20/96 2-SPM-089A-2-1 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 05/03/96 2-SPM-089A-2-1 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H c?.70 05/03/96 2-SPM-089A-2-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 05/27/96 2-SPM-089A-2-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C?.70 05/27/96 2-SPM-089A-2-3

LOW HEAD SAFETY INJECTION PUMP 11 1A" 2 C-H C7.30 04/28/96 2-SPM-089A-2-3 LOW HEAD SAFETY INJECTION PUMP "1A" 2 C-H C7.70 04/28/96 2-SPM-089A-2-4 LOW HEAD SAFETY INJECTION PUMP 11 18 11 2 C-H C7.30 04/28/96 2-SPM-089A-2-4 LOW HEAD SAFETY INJECTION PUMP 11 18 11 2 C-H C7.70 04/28/96 2-SPM-089A-2-5 LOW HEAD SAFETY INJECTION DISCHARGE PIPING TO 2 C-H c7.30 04/28/96 MOV-2890C o en -u :t:-

OCDO>rt o,cart 7'....,*CDQJ (D 0, n rt r- N ::T N3 Page 13 of 17 zz 0 0 0 (D

                                                                                                                 -+, ....

v,1-V, '° ~

'?~

NvJ o,~

~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-089A-2-5 LOW HEAD SAFETY INJECTION DISCHARGE PIPING TO 2 C-H c7.70 04/28/96 MOV-2890C 2-SPM-089A-2-6 DISCHARGE INTO RWST FROM SI PUMPS 2 C-H C7.30 04/28/96 2-SPM-089A-2-6 DISCHARGE INTO RWST FROM SI PUMPS 2 C-H c7.70 04/28/96 2-SPM-089A-3-1 NITROGEN SUPPLY TO SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 05/20/96 TANKS 2-SPM-089A-3-1 NITROGEN SUPPLY TO SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 05/20/96 TANKS 2-SPM-089A-3-2 LHS! TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 05/27/96 2-SPM-089A-3-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.70 05/27/96 2-SPM-089B-1-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-089B-1-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-089B-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.10 05/03/96 2-SPM-089B-1-2 LOOP "A" SAFETY INJECT ION ACCUMULATOR 2 C-H C7.30 05/03/96 2-SPM-089B-1-2 LOOP "A" SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 05/03/96 2-SPM-089B-1-3 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-089B-1-3 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-089B-1-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 05/27/96 2-SPM-089B-1-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H c7.70 05/27/96 2-SPM-089B-1-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 05/03/96 2-SPM-089B-1-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 05/03/96 2-SPM-089B-1-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 05/04/96 C, V) "U )> o m m rt 0 -, c.c rt-7' ...... m m rD ID C"> rtr-N~ W3 Page 14 of 17 z z ro 0 0 0 :J

                                                                                                                   -t, rt w-
                                                                                                         "°~
                                                                                                         ?'r' NW ex,~
                                                                                                         ~o

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-089B-1-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7. 70 05/04/96 2-SPM-089B-1-7 SAFETY INJECTION ACCUMULATOR VENT LINE 2 C-H c7.30 05/16/96 2-SPM-089B-1-7 SAFETY INJECTION ACCUMULATOR VENT LINE 2 C-H c7.70 05/16/96 2-SPM-089B-1-8 NITROGEN SUPPLY TO SAFETY INJECTION ACCUMULATOR 2 C-H C7.70 05/20/96 TANKS 2-SPM-089B-1-8 NITROGEN SUPPLY TO SAFETY INJECTION ACCUMULATOR 2 C-H c7.30 05/20/96 TANKS 2-SPM-089B-2-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-089B-2-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 2-SPM-089B-2-2 LOOP "B" SAFETY INJECTION ACCUMULATOR 2 C-H c7.10 05/03/96 2-SPM-089B-2-2 LOOP 11 811 SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 05/03/96 2-SPM-089B-2-2 LOOP "B" SAFETY INJECTION ACCUMULATOR 2 C-H c7.70 05/03/96 2-SPM-089B-2-3 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 2-SPM-089B-2-3 REACTOR COOLANT SYSTEM B-P B15. 70 06/04/96 2-SPM-089B-2-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 05/27/96 2-SPM-089B-2-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H c7.70 05/27/96 2-SPM-089B-2-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.30 05/03/96 2-SPM-089B-2-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H C7.70 05/03/96 2-SPM-089B-2-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 05/04/96 2-SPM-089B-2-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.70 05/04/96 2-SPM-089B-3-1 REACTOR COOLANT SYSTEM B-P B15.50 06/04/96 0(1)-U)> 0 CD OJ rt 2-SPM-089B-3-1 REACTOR COOLANT SYSTEM B-P B15.70 06/04/96 o,mrt A_,, CD O> CD Dl n rt.-N:r

                                                                                                              +'3 Page 15 of 17                            Z 0

Z 0 0 CD

                                                                                                              --t, rl-vJ-U1 '() .....
                                                                                                       '?  q' NvJ o,~
                                                                                                       ~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-0898-3-2 LOOP ncn SAFETY INJECTION ACCUMULATOR 2 C-H C7 .10 05/03/96 2-SPM-0898-3-2 LOOP 11c11 SAFETY INJECTION ACCUMULATOR 2 C-H C7.30 05/03/96 2-SPM-0898-3-2 LOOP 11c11 SAFETY INJECTION ACCUMULATOR 2 C-H C7. 70 05/03/96 2-SPM-0898-3-3 REACTOR COOLANT SYSTEM 8-P 815.50 06/04/96 2-SPM-0898-3-3 REACTOR COOLANT SYSTEM 8-P 815 .70 06/04/96 2-SPM-0898-3-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H c7.30 05/27/96 2-SPM-0898-3-4 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H c7.70 05/27/96 2-SPM-0898-3-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H c7.30 05/03/96 2-SPM-0898-3-5 SAFETY INJECTION ACCUMULATOR TEST LINE 2 C-H c7.70 05/03/96 2-SPM-0898-3-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.30 05/04/96 2-SPM-0898-3-6 SAFETY INJECTION ACCUMULATOR MAKE UP LINES 2 C-H C7.70 05/04/96 2-SPM-089B-4-1 REACTOR COOLANT SYSTEM 8-P B15.50 06/04/96 2-SPM-0898-4-1 REACTOR COOLANT SYSTEM 8-P 815.70 06/04/96 2-SPM-0898-4-2 LHSI TO HHS! TO HOT AND COLD LEGS 2 C-H C7.30 05/27/96 2-SPM-0898-4-2 LHS! TO HHS! TO HOT AND COLD LEGS 2 C-H c7.70 05/27/96 2-SPM-124A-1-2 11A11 S/G 8LOWDOWN 2 C-H C7.10 11/21/95 2-SPM-124A-1-2 "A" S/G 8LOWDOWN 2 C-H C7.30 11/21/95 2-SPM-124A-1-2 "A" S/G 8LOWDOWN 2 C-H C7.70 11/21/95 2-SPM-124A-2-2 .. 8 .. S/G 8LOWDOWN 2 C-H C7.10 11/21/95 2-SPM-124A-2-2 .. 8 11 S/G 8LOWDOWN 2 C-H C7.30 11/21/95 0 (/) -0:,:,,

o ro m rt 2-SPM-124A-2-2 11 8 S/G 8LOWDOWN 11 2 C-H c7.70 11/21/95 o,<crt A_.*Cl)D>

                                                                                                        <Tl Cl        (l rt r - N :::r U1    3 Page 16 of 17                              ;z  z:        <Tl 0   0   0     ::,
                                                                                                                ..... rt vJ-U1 '()  .p.
                                                                                                        ?<?'

NvJ a,~

~a

Abstract of Examinations Performed System Pressure Test Program Sect XI Sect. XI Sect. XI Zone Description Class Category Item Date 2-SPM-124A-3-2 11 C11 S/G BLOWDOWN 2 C-H c7.10 11/21/95 2-SPM-124A-3-2 11 C11 S/G BLOWDOWN 2 C-H C7.30 11/21/95 2-SPM-124A-3-2 11 C S/G BLOWDOWN 11 2 C-H C7.70 11/21/95 2-SPM-130B-1-2 PARTICULATE RAD MONITOR SAMPLE INTO CONTAINMENT 2 C-H C7.30 05/15/96 2-SPM-130B-1-2 PARTICULATE RAD MONITOR SAMPLE INTO CONTAINMENT 2 C*H C7.70 05/15/96 OU>"C;J> OCDIDrt n,tcrt A_.., CD ID ro m n rtr-N:::T 0-3 Page 17 of 17 z: z: 0 0 0 (1)

I ...... rt

Attachment I Page 27 of 34 Serial No.: 96-310 Docket No.: 50-281 Abstract of Examinations Snubber Program Snubber visual inspection was performed in accordance with Technical Specifications (T. S.) 4 .17, no visual failures were identified during the inspection. However, during power operation prior to refueling shut down, mechanical snubber 2-MS-MSS-5 was identified to have the snubber pin partially pulled out. The snubber was declared inoperable. The snubber was made operable by re-inserting the pin and installing a new cotter key. Fifty (50) snubbers were selected for functional testing and seal replacements this refueling outage. No failures were identified. All snubbers were as-left visually inspected satisfactorily prior to Unit 2 start-up .

Attachment I Page 28 of 34 Serial No.: 96-310 Docket No.: 50-281

Abstract of Examinations Eddy Current examinations of Nonferromagnetic Steam Generator Tubing Inservice examination was performed on steam generator "C" In Stearn Generator "C", all available tubes were inspected full length with bobbin probes. A 670 tube sample was tested with Rotating Pancake Coil (RPC) probes in the hot leg transition (TSH

 +/- 3") region. Supplemental examinations were also performed using RPC probes where additional confirmatory or other data was desired. The following tubes were plugged:

Row Column 43 31 38 29 38 31 31 27 34 73 35 68

1 1

59 36 This Steam Generator contains a total of nine plugged tubes. the attached list for details. See Steam Generator 11 C11 ROW COL. IND. LOCN. Remarks 1 1 16 TSC 1 1 14 TSC 12 6 18 6H 12 7 14 6H 4 10 16 7H 16 13 10 7H 25 13 26 TSC 25 13 PIT TSC 20 14 17 6C

Page 1 of 7

Attachment I Page 29 of 34 Serial No.: 96-310 Docket No.: 50-281 ROW COL. IND. LOCN. Remarks 25 14 12 6H 27 14 19 7C 30 14 14 BPC 4 16 17 7C 7 16 15 2H 33 19 12 6H 23 23 15 2H 31 27 SAA TSH plugged* 38 28 14 AV3 1 29 18 2C 38 29 13 AV2 plugged ** 38 29 37 AV3 plugged 38 29 32 AV4 plugged 38 29 PID AV3 plugged 17 30 10 4H 37 30 20 AV2 37 30 21 AV3 37 30 PID AV3 10 31 16 TSC 38 31 17 AVl plugged ** 38 31 18 AV2 plugged 38 31 29 AV3 plugged 38 31 PID AV3 plugged 43 31 24 AVl plugged 43 31 25 AV2 plugged 43 31 29 AV3 plugged 43 31 42 AV4 plugged 43 31 PID AV4 plugged 10 32 18 TSC 23 32 18 BPC Page 2 of 7

Attachment I Page 30 of 34 Serial No.: 96-310 Docket No.: 50-281 ROW COL. IND. LOCN. Remarks 40 32 16 6C 23 33 19 4H 23 33 10 4C 40 33 16 AV2 40 33 17 AV3 20 34 13 6C 24 34 18 4H 38 34 12 AVl 38 34 21 AV2 38 34 24 AV3 38 34 18 AV4 38 34 PID AV3 1 36 RST TEH plugged*** 12 40 19 6H 37 40 12 AV3 43 40 22 AV2 43 40 PID AV2 27 41 17 6C 42 41 15 2C 39 42 27 6C 23 43 16 TSC 42 45 15 lH 9 49 12 TSC 28 49 19 AV4 5 51 19 TSC 16 54 18 SC 35 54 14 AV2 Page 3 of 7

Attachment I Page 31 of 34 Serial No.: 96-310 Docket No.: 5D-281

ROW 40 40 40 COL.

54 54 54 IND. 23 11 PID LOCN. AV3 AV4 AV3 Remarks 34 55 15 6H 39 55 14 AV3 39 55 10 AV4 40 57 16 AVl 5 58 16 4C 32 58 18 TSC 32 58 13 TSC 1 59 RST TEC plugged*** 26 60 18 6H 21 61 13 4C 44 61 12 4C 5 62 16 2C 12 63 10 2C 40 63 14 AV3 40 63 13 AV4 22 64 15 4C 1 65 18 TSC 10 66 16 lC 12 66 18 6H 35 68 MAA TSH plugged* 35 68 DRI TSH 19 71 14 6C 37 71 13 2C 34 73 SAA TSH plugged* Page 4 of 7

Attachment I Page 32 of 34 Serial No.: 96-310 Docket No.: 50-281 ROW COL. IND. LOCN. Remarks 28 75 19 TSC 31 75 11 AV3 31 75 11 AV4 24 79 10 4C 8 83 10 BPC 8 83 12 TSC 8 83 10 TSC 8 83 15 TSC 8 83 14 TSC 21 84 14 6C 3 88 13 BPC 12 92 15 TSC 12 92 16 TSC 13 92 13 TSC 2 94 16 2C 2 94 10 2C

   *   - Anomalous indication preventively plugged
   **  - AVB wear preventively plugged
       - Restricted Page 5 of 7

Attachment I Page 33 of 34 Serial No.: 96-310 Docket No.: 50-281 VIRGINIA ELECTRIC AND POWER COMPANY STEAM GENERATOR EDDY CURRENT TUBE INSPECTION GLOSSARY OF TERMS

1. ROW, COL COLm..1N Tube identifier numbers an X-Y coordinate system.

2. IND INDICATION Character codes and numerics that represent the analysis results of the data for that tube, e.g., SAA, 25%, etc.

3. LOCN LOCATION The location in the tube of the INDICATION called.

4. PID POSITIVE I.D. utilized to verify the tube /ID of an indication from a tube containing an indication which was tested previously during the same inspection.

5. MAA - MULTIPLE AXIAL ANOMALY - Describes multiple axially oriented anomalies that are called from Rotating Pancake Coil probe data.

6* DRI DISTORTED ROLL TRANSITION INDICATION A possible

7.

tube wall loss condition that is un-quantifiable with a numeric percent call due to the signal characteristics and is located at the roll transition probe. PIT often retested with RPC A small volumetric RPC indication that has been detected at Surry above the TSC on the cold leg which is not crack-like and has essentially the same axial and circumferential extent.

8. RST RESTRICTED - Indicates that the probe listed in the record would not physically pass the location specified.

9. 18 A number in the indication column shows the%

through wall depth of the indication.

10. TSH Top of Tubesheet Hot leg.

11. TSC Top of Tubesheet Cold leg.

12. #C, #H (#=number) of Support Plate Hot or Cold leg.

e.g., 3H, 6H, 7C.

13. AVl, AV2, AV3, AV4 Anti-Vibration Bars 1 through 4.

14. BPH, BPC BAFFLE PLATE HOT AND COLD

15. TEH Tube End, Hot Leg.

Page 6 of 7

Attachment I Page 34 of 34 Serial No.: 96-310 Docket No.: 50-281

16. SAA Describes Single Axially Oriented Anomaly Called From Rotating Pancake Coil.

Note: Where no comment appears in the remarks column the tube is still in service. Page 7 of 7

Attachment 2 Surry Power Station Unit 2 lnservice Inspections Repairs and Replacements NIS-2 Forms

Attachment II Page 1 of 44 Serial No.: 96-310 Docket No.: 50-281 Repair and Replacements Repair and replacements completed during this refueling outage were performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code, 1989 Edition. The following paragraphs and the attached NIS-2 forms represent those repairs and replacements performed on Class 1 and Class 2 systems: RR# 95-218, replace flange fasteners on valve 2-CS-133. This replacement was performed on work order 00326244-01, and complet-ed on 10-10-95. RR# 95-236, overhaul valve 2-RC-PCV-2455C. This replacement was performed on work order 00324008-01, and completed on 11-13-95. RR# 95-242, replace #4 stud on steam generator (hot-leg manway) 02-RC-E-lB. This replacement was performed on work order 003302-41-01, and completed on 11-17-95. RR# 95-243, repair weld leak on line 2"-CH-385-602. This repair was performed on work order 00331556-01, and completed on 12 95 .

RR# 96-004, add/modify pipe supports on 2"-CH-306-602 as required by Design Change Procedure 96-063.05, Rev. 3. This replacement was performed on work order 00299371-05, and completed on 3 96.

RR# 96-005, replace body to bonnet gasket on valve 2-RC-MOV-2592. This replacement was performed on work order 00330314-01, and completed on 5-19-96. RR# 96-013, replace piping on line 6"-RH-120-152 and support H-

31. This replacement was performed on work order 00336901-02, and completed on 2-25-96.

RR# 96-017, replace piping on line number 2"-CH-385-602. This replacement was performed on work order 00338531-05, and complet-ed on 3-21-96. RR# 96-018, overhaul valve 2-CH-HCV-2160. This replacement was performed on work order 00337645-01, and completed on 5-19-96. RR# 96-019, overhaul valve 2-RC-HCV-2557C. This replacement was performed on work order 00313722-01, and completed on 5-28-96. RR# 96-020, overhaul valve 2-RC-PCV-2455B. This replacement was performed on work order 00310141-01, and completed on 5-20-96 . Page 1 of 3

Attachment II Page 2 of 44 Serial No.: 96-310 Docket No.: 50-281

RR# 96-024, open, inspect valve and replace cover fasteners on valve 2-CH-267. This replacement was performed on work order 00314942-01, and completed on 5-16-96.

RR# 96-026, replace valve 2-GN-1. This replacement was performed on work order 00338171-01, and completed on 5-30-96. RR# 96-027, replace valve 2-IA-868. This replacement was per-formed on work order 00338171-01, and completed on 5-30-96. RR# 96-028, replace valve 2-SI-243. This replacement was per-formed on work order 00332163-01, and completed on 5-21-96. RR# 96-029, overhaul valve 2-RC-PCV-2455A. This replacement was performed on work order 00330852-01, and completed on 5-20-96. RR# 96-037, replace valve 2-CH-MOV-2115B. This replacement was performed on work order 00329092-01, and completed on 6-4-96. RR# 96-038, replace valve 2-CH-MOV-2115D. This replacement was performed on work order 00329093-01, and completed on 6-4-96. RR# 96-049, replace piping on line No. 6"-RH-120-152 and install new valve 2-RH-108. This replacement was performed on work order 00331022-01, and completed on 5-22-96. RR# 96-051, inspect bonnet fasteners and re-torque bonnet on valve 2-SI-57. This replacement was performed on work order 00341041-01, and completed on 5-16-96. RR# 96-055, overhaul valve 2-CH-HCV-2160. This replacement was performed on work order 00340998-01, and completed on 5-17-96. RR#-056, replace studs on valve 2-MS-GOV-005. This replacement was performed on work order 00336189-01, and completed on 5-6-96. RR# 96-058, replace flange fasteners on pump 2-SI-P-lA. This replacement was performed on work order 00334280-01, and complet-ed on 5-28-96. RR# 96-070, replace valve 2-SI-85. This replacement was per-formed on work order 00341826-01, and completed on 5-21-96. RR# 96-071, replace bolting on 2-RH-E-lA. This replacement was performed on work order 00341707-01, and completed on 5-23-96. RR# 96-072, replace bolting on 2-RH-E-lB. This replacement was performed on work order 00341706-01, and completed on 5-24-96 .

Page 2 of 3

Attachment II Page 3 of 44 Serial No.: 96-310 Docket No.: 50-281

RR# 96-074, replace valve 2-MS-176. This replacement was per-formed on work order 00341742-01, and completed on 6-4-96.

RR# 96-075, replace valve 2-MS-178. This replacement was per-formed on work order 00341741-01, and completed on 6-4-96. RR# 96-076, replace valve 2-MS-182. This replacement was per-formed on work order 00341872-01, and completed on 6-4-96. RR# 96-077, replace valve 2-CH-RV-2209. This replacement was performed on work order 00332778-01, and completed on 5-17-96. RR# 96-078, replace valve bonnet on 2-CS-27. This replacement was performed on work order 00333229-01, and completed on 5 96. RR# 96-079, replace valve 2-VP-12. This replacement was per-formed on work order 00341271-01, and completed on 5-29-96. RR# 96-080, replace flange fasteners on valve 2-RC-SV-2551A. This replacement was performed on work order 00331695-01, and completed on 6-1-96. RR# 96-081, replace flange fasteners on valve 2-RC-SV-2551B. This replacement was performed on work order 00331696-01, and completed on 5-28-96. RR# 96-082, replace flange fasteners on valve 2-RC-SV-2551C. This replacement was performed on work order 00331697-01, and completed on 5-28-96. RR# 96-087, cut and reweld piping downstream of ASME Class 2 boundary valves 2-GN-1, 2-GN-2 and 2-GN-3. This replacement was performed on work order 00339448-01, and completed on 5-30-96. RR# 96-089, replace five (5) studs on valve 2-RS-MOV-255A. This replacement was performed on work order 00342564-01, and complet-ed on 6-2-96. RR# 96-092, replace manway studs on steam generator 2-RC-E-lA. This replacement was performed on work order 00331267-02, and completed on 5-22-96. RR# 96-093, replace manway studs on steam generator 2-RC-E-lC. This replacement was performed on work order 00330842-02, and completed on 5-24-96. Page 3 of 3

Attachment II Page 4 of 44 Serial No.: 96-310 Docket No.: SD-281

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Virginia Electric and Power Co.

As Required by the Provisions of the ASME Code Section XI 11/14/95

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _____ 1 1 of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant Unit-------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00326244-01, RR#95-218 Address Aepalr Organization P.O. No., Job No., etc.

3. Work Performed by _ __.v._.i_.r..,g...i...,.p.._ia........e..a...w..,_e....r _ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ __,N,,A"---------

Name Authorization No. _ _NA _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ ___;Nc::A.::....__ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ c_on_t_a_i_n_m_e_n_t---'sp,_r_a..:.y_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

5. (a) Applicable Construction Code 831

1 1 9 ~ Edition,_N_A_ _ _ _ _ _ Addenda, __N_-_1_'_N_-_ 7 _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs Mackson, Inc, NA NA 2-CS-133 NA Replacement No Nuts Mackson, Inc. NA NA 2-CS-133 NA Replacement No

7. Description of Work RepJ ace flange fasteners

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT467650

9. R e m a r k s * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________

                                    ----==------------Expiration Date _ _ _ _N_A                          ___________

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford I Ct . a{ e. ha~e I in,.ef.edn.U components described in this Owner's Report during the period S-/a*'fi.\ /Q..-//;f 1~o .JD /l::t- 7 lo 'S"{Cr'f1, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in.accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectioh ~ { . / ; ) t\

  ---\L+-<--"'~-'~~~--~----,-~~~~~-----Commissions _______                                   v_a_._5_4_3___________

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _ _--'--{'-/-__,_/-=5'_19 q5

Attachment II Page 5 of 44 Serial No.: 96-310 Docket No.: 50-281

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 1/5/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 5000 Dominion Blvd., Glen Allen, Va. 23060 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _.,..,..._ _ _ _ _ _ _ _ _ __

Two Unit-------------------- Name 5570 Hog Island Rd., Surry, ~a. 23883 wo#00324008-0l, RR#95-236 Address Repair Organization P.O. No., Job No,, etc.

3. Work Performed by _ _ v_ir...;g=-1-*n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---NA _ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addreas

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant B31.l 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part#

 "rim Assembly(plug)          Copes-Vulcan                 141703                NA       2-RC-PCV-2455C         NA

Replaced No Part#

rim Assembly(plug) Copes-Vulcan 141703 NA 2-RC-PCV-2455C NA Replacement No

7. Description of Work_o_v_e_rh_a_u_l_v_a_l_v_e_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.:.._:...__ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Tamp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is SY. in. x 11 in,, (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back-) CSY257079

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE

. We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI.

Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

         =~**:*;~?j-~..;..£_'t_~_/_N_A_73_~-z--c::-$t;.--.,~--~---Expi::::_n_D_a_;t~               ----::'M::::c::N:A:::::::::~-.*-,-9-£-~--

0wn~,;{:g;ee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have fzected the components described in this Owner's Report during the period _ _ _ _ _ ~5~--/~0~'-&/~t./__ to 'f-It:,- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.("). /I -4 f. ~ Va.

         -----+~-¥-.::...---=--'-----'-L.....C--"~-""---=----'---Commissions _____________________         543                             _

insi>ectc>,7s Signature National Board, State, Province, and Endorsements Date

Attachment II Page 6 of 44 Serial No.: 96-310 Oocket No.: 50-281

,. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 1/5/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Sta_tion Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00330241-01, RR#95-242 Address Repair Organization P.O. No., Job No., ate.

3. Work Perf~rmed by __v_ir-=g::..i_n_i_a_P_o_w_er_,..,---------- Type Code Symbol Stagif---N_A_ _ _ _ _ _ __

Neme Authorization N o . - - - - - - - - - - - - - - - ' - Same as above Expiration Date ___N_A _ _ _ _ _ _ _ _ _ _ __ Address Reactor Coolant

4. Identification of System _ _ _ _ _ _ _ _ _ _' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B3l,l 55 NA N-l, N-7

5. (al Applicable Construction Code 19 ___ Edition,--'_ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 _ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped

         *Name.of               Name of.        Manufacturer*   *.~-r
                                                                      . ebard           Other**        *veer      Replaced,        (Yes Component             Manufacturer        Serial No.             No.        Identification      Built  or Replacement or No)

Steam Gen. Manway Stud & Nut Assy. Westinghouse NA NA 2-RC-E-lB NA Replacement NO

7. Description of Work Replace #4 stud on the hot leg manway.

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure D Other O Pressure ______ psi Test Temp,------'--'° F NOTE: Supplement!al sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT; 12 /91

FORM NIS-2 (Back) PO# ET41822 -

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A______________________________ _____N_A___________ Expiration Date _ _ _ _N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co*

of Hartford, Ct. *

                                                                                      ,-.. have inw~ted the components described in this Owner's Report during the period                       5'. rt./ to      ,)-ID- I   'I                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner.'s Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this. Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this loo,,ctloo. (L,.J I ~ Commissions _ _ _ _ _ _ _ Va. _ _ 543 Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _ _~/_-~C(.__19 '1 C

Attachment II Page 7 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 2/14/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addre11 Surry Power Station Two

2. Plant Unit--------------------

                                            . Name 5570 Hog Island Rd., Surry, Va. 23883                                                 wo#OQ331556-01, RR#95-243 Addre11                                                           Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_rg:;.1_*n_i_*a_P_o_w_e_r,,..,...._ _ _ _ _ _ _ __ Type Code Symbol Sta'IJR ____ NA_*_ _ _ _ _ __

Name Authorization N o . - - - : = - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addre1&

4. Identification of System _ _ _ _Charging _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _-'-_Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_ _ __

i9

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code

                                                                                                                         * .      Repaired,    Stamped National                      .,

Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) Weld NA NA NA 2 11 -CH-385-602 NA Repaired No

7. Description of Work Repair weld leak. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure NOP psi Test Temp. NOT'" °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) None

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ s;gaed~~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,<t,.holdjng i:I valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of v1rg1n1a and employed by HSBI and I Co. of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - = - - - - - , , - - - , - - - - - - - h a v e insP.ected the components described in this Owner's Report during the period ______S~--~'~o~--<f~t.-{~_to S"-(0 - 'f 7                                      and state that

I to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectio(\ " ..../)__ {) ~ Va. 543

  ---4Ul-'--"~=--=-----'-----;f_,_.....,__.__________ commissions _____________________                                              _

insi>ector*s Signature National Board, State, Province, and Endorsements Date

Attachment II Page 8 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 8/1/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 3 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addreaa Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo299371-05, RR#96-004 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by Virginia Power Type Code Symbol StaffiP _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - : = - - - - - - - - - - - - - Same as above NA Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ AddreH Chemical and Volume Control

4. Identification of System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19_ _ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped N*ame of Name of' Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Dubose Nat. DC# 1/4" Plate Energy Services 104602 NA 2"-CH-306-602 NA Replacement No Dubose Nat. Ht. # 4"X3"X1/4" TS Energy Service, 894998 NA 2"-CH-306-602 NA Replacement No Ht# 2 1/2" Pipe Hub, Inc. N07998 NA 2"-CH-306-602 NA Replacement No 1/2"-13 X 2" Bolts Mackson, Inc. NA NA 2"-CH-306-602 NA Replacement No 1/2"-13 Nuts Mackson, Inc. NA NA 2"-CH-306-602 NA Replacement No _ Description of Work Add/modify pipe supports on 2"-CH-306-602 as required by DCP 96-063.05, Rev. 8. 7 8, Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure [J Other O Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO # CNT-506713 (1/4" plate), CNT-507236 (4"X 3"X 1/4" TS),

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CSY-383500 (2 1/2" pipe), BNT-467650 (bolts), CNT-511172 (nuts) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Date ~ 6 , , 19 91$ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - , - - - r : : , , - - - - - - h a v e inspected the components described in this Owner's Report during the period                                       to   s;/ID/97                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this* Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                            /"7(2 c~.:ZZC.- Commissions _ _ _ _ _ _.v_a_.__8_8_3_ _ _ _ _ _ _ _ _ __

I nspe~Slgnature National Board, State, Province, and Endorsements Date

Attachment II Page 9 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 8/1/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 Addren Surry Power Station Two

2. Plant Unit---------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00299371-0S, RR#96-004 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by_--'v"'i"'r""g'"'i'°'n"'i=a_,_Po:.w:.ce:ar=------------ Type Code Symbol Stamp _ _ __.,N"'A~-------

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ ___;;N..cA.;:.__ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _ _c_h_em_ic_a_1_a_n_d_v_o_1_u_m_e_c_on_tr_o_1_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

831 1 7

5. (a) Applicable Construction Code ' 19~Edition,_N_A_ _ _ _ _ _ Addenda, __N_-_1_'_N_-__ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 8 9

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Energy & Packing sl'p 3"X 3" X 1/4" TS Process Corp. 10092 NA 2 11 -CH-306-602 NA Replacement No s.o. 2 11 U-Bolts Grinnell Corp. #41-17463 NA 2 11 -CH-306-602 NA Replacement No Energy & Packing Sl'p 2 11 X 2 11 X 1/4 11 TS Process Corp. 6901 NA 2 11 -CH-306-602 NA Replacement No Dubose Nat. Ht. # 2"X 2"X 1/4 11 Angle Energy Service, J4710 NA 2 11 -CH-306-602 NA Replacement No Consolidated Ht. # 1" Plate Power Supply 7418997 NA 2 11 -CH-306-602 NA Replacement No

7. Description of Work Add/modify pipe supports on 2"-CH-306-602 as required by DCP 96-063.05, Rev. 8.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-433264 (1" plate), CNT-505552 (3"X 3"X 1/4" TS),

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CNT-469123 (U-bolts), CNT-489737 (2"X 2"X 1/4" TS), CNT-497424 (2 "X 2 "X 1/ 4" angle) . CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No, ____N_A ___________ Expiration Date ____N_A___________ Signed <i2 ~ # -~ f t f Ownero/~oesignee, Title e:at;d,,-KL4f",e. Date _d,~...i:t,#-*--,../------, 19 ;76 CERTIFICATE OF INSERVICE INSPECTION I, the undersigne{r holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of irginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - ~ - - - . - - , , - - - - h a v e ins9ected the components described in this Owner's Report during the period                                       to    5""j.lD/Y7                    , and state that to the best of my knowledge and belief, the Owner h;;is performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                                          ~
                                                     -7,,..                                 Va. 883
                                          ,      '4.~Commissions _ _ _ _--,--------,-----:-::--:---

lnspe~~ National Board, State, Province, and Endorsements Date

Attachment II Page 10 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 8/1/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 3 3 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo299311-05, RR#96-004 Address Aepalr Organization P.O. No., Job No., etc.

3. Work Performed by Virginia Power Type Code Symbol Stamp _ ____;Nc:A.:__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Dete _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre1& Chemical and Volume Control

4. Identification of System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19_8_ 9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Dubose Ht. # 3/4 11 Plate Steel, Inc. 411T4821 NA 2 11 -CH-306-602 NA Replacement No Dubose Nat. Ht. # 3/8" Plate Energy S~rvices 412C2722 NA 2 11 -CH-306-602 NA Replacement No

7. Description of Work Add/modify pipe supports on 2 11 -CH-306-602 as required by DCP 96-063.05, Rev. 8.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CSY-294822 (3/4"" plate), SSY-389347 (3/8" plate)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date ____N_A ___________ Signed {i] ,t: ~ ~-- Owner o ~ s Designee, Title fs::C Date_-'-4'-'Mt""'-L...-.£./_ _ _ _ _ , 19 96 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. h:/,e i/sected the components described

                                                                                        ~ /0,
                                                                                          ~

97 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ---------~...,,,,~~~~Q-+-+-+-Y1_.A~~~-----Commissions _______v_a_.__B_B_3_ _ _ _ _ _ _ _ _ _ __

I~ g n a t u r e National Board, State, Province, and Endorsements Date

Attachment II Page 11 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

,. Owner Virginia Electric and Power Co.

Name 6/4/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Bivd., Glen Allen, Va. 23060 i 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

                                         . Name 5570 Hog Island Rd., Surry, Va. 23883                                        wo#oo330314-01, RR#96-005 Address                                               Repair Orgenlz11tlon P.O. No., Job No., etc.

3. Work Performed by __v_ir-'g;;..i_*n_i_a_P_o_we_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ __

Name Authorization N o , - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA AddreH

4. Identification of System _ _ _ _ Reactor

_ _ _ Coolant B3l.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National f!epaired, Stamped Name of Nania of Manufacturer Board' Other Year Repi'aced, * (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or.No)

Nuts Anchor/Darling Part# Wl383 NA 12-RC-MOV-2592 NA Replaced No Part# Wl383 Nuts Anchor/Darling Ht# 442154 NA 2-RC-MOV-2592 NA Replacement No 7 _ Description of Work Replace body to bonnet gasket.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-501332

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ S i g n e d ~ . ~ , / :LSf wnerorOwn'Deslgnee, Title Date _ _ ~~~="M~"'~~-f'-----, 19 ~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of Hartford, Ct. h~jq~ted

                                                                                                    '5         L the components described
                                                                                                                               , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  - - - - - - - ~ *1--,(~
                          ,/1        ~ - - . yi°: ___
                            /,e,.,_(~~-+-+-+-..c....,=-/-=-W-"--_\J
                                                                   '                                   Va. 883 Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
                      ~ector'sSlgnature                                                  National Board, State, Province, and Endorsements Date

Attachment II Page 12 of 44 Serial No.: 96-310 Docket No.: 50-281 l ij; I'

1

                                                                                                                                                 *l FORM NIS-2 OWNER'S REPORT FOR REPAIRS.OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.                                             3/20/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _~ Addre11 Surry Power Station Two

2. Plant Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00336901-02, RR#96-013 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by Virginia Power Type Code Symbol Stam{I _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _ _Residual

_ _ _ _Heat ___ Removal B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code I Repaired, Stamped National Replaced, (Yes

                                                                                                                                                    *I Name of                Name of          Manufacturer         Board               Other          Year Component             Manufacturer        Serial No.           No.            Identification     Built   or Replacement or No)                  I,:

1 Pipe Dubose National llnergy Serv. Inc. Ht. #SW481 NA 6 11 -RH-120-152 NA Replacement No .. \

Energy & Support Plate Process Corp. NA NA H-31 NA Replacement No Consolidated Support Pipe Power Supply NA NA H-31 NA Replacement No I

    . Description of Work Replace piping and support. Code Case N-416-1 applies.

I 7

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure ff" Other O Pressure #(')P psi Test Temp. ..YO r * °F -r NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT452680 (6" pipe), CNT494646 (plate), SSY410675 (3" pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A___________ Signe4.~itl'fsI ~4ch'M Date-~~=-~~--~----, 19 9~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have in_w}'cted the components described in this Owner's Report during the period /(>- fl/, ,f 3 to / O-JlJ-71,,, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. LJ

                 ¥-)q~
                          /1 _/J_,_      !~ /,) (\

Inspector's Signature

                                               ~Commissions _ _ _ _

Va. 543 National Board, State, Province, and Endorsements Date_ _ ~'j~--~J-~0__19 CJ{..

Attachment II Page 13 of 44 Serial No.: 96-310 Docket No.: 5D-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7 /3/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00338531-05, RR#96-0l7 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by Vir9:inia Power Type Code Symbol Stamp _ _ _..::N,::,A,...__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address Chemical and Volume Control

4. Identification of System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__8 _9 _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of- Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Pipe NA NA NA 2 11 -CH-385-602 NA Replaced No John H. Pipe Frischkorn, Inc. 210465 NA 2 11 -CH-385-602 NA Replacement No Ray Coupling Miller, Inc. NA NA 2 11 -CH-385-602 NA Replacement No

7. Description of Work Replace piping. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure if Other D Pressure &or psi Test Temp. NCI C °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

i FORM NIS-2 (Back) PO# SSY-184712 (pipe), PO# 39527 (coupling)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached Deviation Report# S-96-1454 written due to lack of material certification documentation for PO# 39527. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _,._ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. _ _ _ _ NA _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - NA -------------- CERTIFICATE OF INSERVICE INSPECTION I, the undersigne{r holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Pro~ince of irginia and employed by HSBI and I Co* of

Hartford, Ct. *

                                                ,                                                     h,ve ipspected the components described in this Owner's Report during the period                                           to    */0/9'>                        , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                                                        . . -nA..J
                                         ~

Va. 883

         ----~----'--c=l\-L,r-"°"',c....,,""'&fdL'-=....:...--w</'---
                                                                     - __ commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
                            -lnspecto~e                                                    National Board, State, Province, and Endorsements Dat-e   -~z.,__l_~+--1_199,6 I           ,

Attachment II Page 14 of 44 Serial No.: 96-310 Docket No.: 50-281

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 6/18/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Sheet _____ 1 of _ _ 1_ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Two Unit-------------------- N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#00337645-01, RR#9G-018 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _ v_ir~g~1-*n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.:.:NA:.:__ _ _ _ _ __

Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre1&

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME

Name of Component Name of Manufacturer Manufacturer Serial No.

Part# National Board No. Other Identification 2-CH-HCV-2160 Year Built NA Repaired,* Replaced, or Replacement Replaced Code Stamped (Yes or No) No rim Assembly (plug) Copes-Vulcan 141703 NA Part# rim Assembly (plug) Copes-Vulcan 141703 NA 2-CH-HCV-2160 NA Replacement No

7. Description of Work._o_v_e_r_h_au_l_v_a_l_v_e_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Othar D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtai_ned from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-518774

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signed(il ,!'_,. ~ * ~ J o w r n i r f r ~ n e e , Title 5tr ......*--.,./:.....Y-----, 19 Date _ _,,,.<.T.w'-li:.c..d...,~-t:... 9? CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. h~v}. in2_ected the components described in this Owner's Report during the period to £/+/J/7' Z , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                     ~ ~ - f f : ____ Commissions _ _ _ _ _ _ _
  ------f~~"""-~!6-'~~'-->'~--=-=-"--"--f/V-'---_'-'                                            Va. _ _883          _ _ _ _ _ _ _ _ _ _ _ __

inspacto~ National Board, State, Province, and Endorsements

Attachment II Page 15 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/4/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addreas Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00313722-01, RR#96-0l9 Address Aepalr Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i...;rg=-i-*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Sta!J1f---N_A _ _ _ _ _ _ __ Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date ___N_A _ _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

 "rim Assembly(plug)          Copes/Vulcan                 Part# 138120          NA       r2-RC-HCV-2557C        NA       Replaced           No Part# 138120 rim Assembly(plug)          Copes/Vulcan                 Ht# 32626             NA       [2-RC-HCV-2557C        NA       Replacement        No

7. Description of Work_o_v_er_h_a_u_l_v_a_lv_e_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO .# CNT-517242

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ ____N_A ___________ Expiration Date _ _ _ _N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. haveinspe?;d the components described in this Owner's Report during the period to ?,J 0. f 7 , and state that to the best of my knowledge and belief, the Owner _has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Date_

Attachment II Page 16 of 44 Serial 'No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/4/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va, 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Two Unit _ _ _ _ _ _- - ' - - - - - - - - - - - - - - N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo310141-01, RR#96-020 Addra11 Repair Organlz11tlon P.O. No., Job No., etc.

3. Work Performed by _ _ v_irg-=-i-'n_i_a_P_ow_e_r_,.,_ _ _ _ _ _ _ __ Type Code Symbol Stamr _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addra11

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa 89

     .(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Nain'e of Name of Manufacturer Board Other Year

Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part# Trim Assembly(plug) Copes/Vulcan 131428 NA 2-RC-PCV-2455B NA Replaced No Part# Trim Assembly(plug) Copes/Vulcan 131428 NA 2-RC-PCV-2455B NA Replacement No

7. Description of Work_o_v_er_h_a_u_l_v_a_lv_e_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-512166

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date ____N_A ___________ Signed~~~~~....lti~~~~L..zk.~6-___!:~W~~~- Date_~,'""'k-0,<J~-&'.~-1~~----, 19 9,t: - CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

hav~,J~sj:ted the components described in this Owner's Report during the period to ~~ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Date

Attachment II Page 17 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/4/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. P l a n t - - - - - - - - - - - - , , . , . . - - - - - - - - - - - - Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#o0314942-01, RR#96-024 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r.;:.g_i_n_ia_P_o_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Stawf----NA _ _ _ _ _ _ __

Name Authorization N o . - - - : - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _Chemical_ _ _ _and _ _Volume

_ _ _ Control B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs NA NA NA 2-CH-267 NA Replaced No Nuts NA NA NA 2-CH-267 NA Replaced No Studs Mackson, Inc. Ht# A16605 NA 2-CH-267 NA Replacement No Nuts Mackson, Inc. Ht# 703280 NA 2-CH-267 NA Replacement No

7. Description of Work Open, inspect valve and replace cover fasteners.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-515124(nuts), CNT-51882l(studs)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signe~*

       .   ~~ee,Title
                         ~~p1 ~                  L.5'f                                           -

Date _---"'1,.../._.,u....,:.e..,Mf,__---"1(-----, 19 91, CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. ha;',, ins~cted the components described in this Owner's Report during the period '</ to '.'2//Djr2 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. I nsp~ t u r

                                               ~                 Commissions _ _ _ _ _ _ _      Va. _ _ 883 _ _ _ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date L_ 1.:;.j

Attachment II Page 18 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. Date _ 7_/16/96

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addre11 Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _- : - - , - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo330111-01, RR#96-026 Address Repair Organization P.O. No., Job N_o., etc.

3. Work Performed by _ _ v_i__

rg=-1-*n_i_a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _.c.NA-'-------- Name NA Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ __ Same as* above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _ _ Steam

___ Generator _ _ _ _Nitrogen B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME

Name of Component Valve NA Name of Manufactu rar Manufacturer Serial No.

NA National Board No. NA Other Identification 2-GN-1 Year Built NA Repaired, Replaced, Replaced Code Stamped or Replacement or No) (Yes No 1 or 2-Valve Vogt 217176 NA 2-GN-1 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure IA2!"

Other D Pressure vo? psi Test Temp. ll lJ -r °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8~ in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) CNT-504093

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ NA _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA Certaificate of~Auth,or~zation No, _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Sign h i

           'tow eror
                        /  p{l-e'      :z?',-r- ~,~

ner's Designee, Title Date--'-l~,__,-_..~1----,4""'~'----, 19 r 9p CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co - of Hartford, Ct.

             ---------------------=+.""'""--,'=.....,.---h~v,: insl}Bcted the components described in t.his Owner's Report during the period                                       to     y/<?.Lf' Z                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

               //0~
             µ.£_17"--b.-ld=--.....,1'-f.~+-~----------Commissions _ _ _ _ _ _ _             Va._ _ 883
  ----f                Ins~                                                     National Board, State, Province, and Endorsements

Attachment II Page 19 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7/17/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00338171-01, RR#96-027 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __,V.=iaar.a,.g:::;in:.:;1::.;'a=-=P~o""w..::;e:.r_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _..:;N::..:A:....__ _ _ _ _ __

Name NA Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addreu

4. Identification of System _ _ _ _ In_s_t_ru..;.__m_e_nt_A_i..:..F_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

831 1 1 7

5. (a) Applicable Construction Code " 19~Edition,_N_A_ _ _ _ _ _ Addenda, __N_-__'_N_-__ _ _ Code Case (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 89

6. ldentifica_tion of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA NA NA 2-IA-868 NA Replaced No Stockham Val vee Valve & Fittings-, Inc. 2"B322B NA 2-IA-868 NA Replacement No Coupling Hajoca Corp. NA NA 2-IA-868 NA Replacement No John H. Tubing Frischkorn, In, NA NA 2-IA-868 NA Replacement No John H. Adaptor Frischkorn, In, 194955 NA 2-IA-868 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure-~

Other D Pressure ,I/(?,) psi TestTemp. A)(Jy-- -°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-523704 & PTE # SS142002.A01 (valve), CNT-443156 &

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached PTE # SU-92-00055 (tubing), CNT-467614 & PTE # SCOM-029.A04 (coupling), CSY-167592 (adaptor) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certifica~Authorization No, ____N_A ___________ Expiration Date _ _ _ _N_A___________ Signed Wd~ 2J.:C &&Db£. Owner or 6'wne?soes1enee, Title Date-¥ifN._.u,c:.~..""'~~/~?_ _ _ _ , 19

9G CERTIFICATE OF INSERVICE INSPECTION I, the undersignep,,,holding II valid commission issued by the National Board ofB.Q..ile.r and ere55ur.11 Vessel Inspectors and the State virginia HS8~ anct ~ co. or Province of and employed by of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - r - : : : - i r = , - - , , - - - - h ~ ' 9 1 in~cted the components described in this Owner's Report during the period                                             to     y"/V/7 /                 .      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correctiv~ measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Va. 883

  ------=----i+c::?"":;,!",--~--~~~----Commissions _ _ _ _ _ _ _ _ _ _ _--,-_ _ _ _ _ _ _ __
                       ~                                                             National Board, State, Province, and Endorsements Date

Attachment II Page 20 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 6/18/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00332163-0l, RR#96-028 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _ v_ir_gc..i_n_i_a_P_ow_e_r...,..,_ _ _ _ _ _ _ __ Type Code Symbol Stagif----NA _ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre1&

4. Identification of System _ _ _ _ Safety

_ _ _Injection B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Stock# Valve Velan 06304640 NA 2-SI-243 NA Replaced No Stock# Valve Velan 06304640 NA 2-SI-243 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure ty() P psi Test Temp. ,A/tJ ;- ° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BYz in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

1-12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-398539

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ' - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ N_A________________________________ Certificate of Authorization No. _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - -NA -------------- Signed 'Zn~nee~F Date _ _,....t. . . .<<"'-J,K=--__,lwoL..._____ , , e_f.--f,'G-- CERTIFICATE OF INSERVICE INSPECTION I, the undersigne,d,, hold\ng a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of virginia and employed by HSBI and I Co. of Hartford, Ct. h~ ilected the components described

                                                                                       'fj~t7'7                               , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Va. 883

  ----i==,,,"'--IH.6-'t,-+-~-,--'-"~~--------Commissions I~                                             _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
                        ;;;pector's Signature                                  National Board, State, Province, and Endorsements Date

Attachment II Page 21 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 6/4/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00330852-0l, RR#96-029 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r.;:.g_in_ia_P_o_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol StaIDP _ _ _N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Addren

4. Identification of System _ _ _ _ Reactor

____ Coolant B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part# Trim Assembly(plug) Copes/Vulcan 131428 NA 2-RC-PCV-2455A NA Replaced No Part# Trim Assembly(plug) Copes/Vulcan 131428 NA 2-RC-PCV-2455 NA Replacement No studs Mackson, Inc. NA NA 2-RC-PCV-2455A NA Replacement No Consolidated Nuts Power Supply NA NA 2-RC-PCV-2455A NA Replacement No

7. Description of Work_o_v_e_r_h_a_u_1_v_a_1_v_e_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic O Nomi~al Operating Pressure 0 Other O Pressure _ _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-512166(trim assembly), BNT-467650(studs), CSY-188937(nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. NA Expiration Date _ _ _ _ N_A___________ SigneQ~ d ~/ Owner or O w n e ~ e , Title f t £ 4¥µ1#.,,,¢, ,19 96 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. hah' incted the components described

                                                                                         ~D~ 7                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Va. 883

  --------+-.--4=.l~.L...J*.._--.,_.,._.='-='----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

I~ l g n ~ National Board, State, Province, and Endorsements Date

Attachment II Page 22 of 44 Serial No.: 96-310 Docket No.: 50-281

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Virginia Electric and Power Co.

As Required by the Provisions of the ASME Code Section XI

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

5000 Dominion Blvd., Glen Allen, Va. 23060 Name 6/21/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre1& Surry Power Station Two

2. P l a n t - - - - - - - - - - . , - , - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo329092-01, RR#96-037 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ __;,V""ir;;;..g""1""*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _N:.:A:..:. .___ _ _ _ _ __ Name NA Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ N_A_ _ _ _ _ _ _ _ _ _ __ Addreas

4. Identification cif System _ _ _ _ Chemical

____ and __ Volume ___ Control B31.1 55 NA N-1, N-7 5, (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Valve NA NA NA 2-CH-MOV-2115B NA Replaced No Stock#

Valve Anchor/Darling 06499205 NA 2-CH-MOV-2115B NA Replacement No 7, Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure W Other O Pressure /f/(J;<> psi Test Temp. A/Qc °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-511689

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, ____ N_A___________ Expiration Date ~---N_A___________ Signed u:1~ /!J O w n e r o r O ~ , Title,

                                            -         TS"f                             Date-~~-*      ~6:~~N~"'----, 19             9" CERTIFICATE OF INSERVICE INSPE~TION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                             and employed by                   HSBI and I Co.                                     of Hartford, Ct.
  - - - - - - - - - - - - - - - - - - - - - - - - - , - - . - : = - - - - - - h a v e in1pected the components described in this Owner's Report during the period------~+-~+-~+--to                                 ~q/9 Z                         , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 1

                                    ~._,_+--+---=--"=-71J,

_ _/'.--._ _ commissions _______v---,--a..,.__s_s_3

                ~~
  - - - - ~ ' - -~
                 -....,."-+-""---'                                                                         _ _ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements

Attachment II Page 23 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 6/21/96 Date---------------~---- 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00329093-0l, RR#96-038 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i""'rg=-i-*n_i_*a_P_o_w_e""'r_'----------- Type Code Symbol StaWf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _ _ Chemical

____ and __ Volume ___ Control B31.1 55 *NA N-1,N-7 5, (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA NA NA *2-CH-MOV-2115D NA Replaced No Stock# Valve Anchor/Darling 06499205 NA 2-CH-MOV-2115D NA Replacement No Tioga Pipe Ht. # Pipe Supply Co. , Inc. 1-27211 NA 2-CH-MOV-2115D NA Repl~cement No

7. Description of Work Replace valve. Code Case. N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure ~

Other O Pressure Poi' psi Test Temp. I</() C °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-511689 (valve), CNT-495399 (pipe)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ____N_A _ _ _ _~------Expiration Date _ _ _ _N_A _ _ _ _ _ _ _ _ _ __ SignedQ~ ,/J~L/ Ownerc,r¥ir's Designee, Title IT.Z::: 4~&:e'dl, Date-~'ll'7A"""~"'"""'~'--'.2"'?1"-------, 19 .2/f, CERTIFICATE OF INSER.VICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co. of. Hartford, Ct. ~~e iry;pected the components described in this Owner's Report during the period ~4 to ~//0/97 , and sta~e that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _____,_a_~-tr2 . . .__

                   ~lnspe;t~
                             +i-~-v--,..*..,....-_    ____* _ _ commissions _ _ _ _ _ _ _v_a_._ 8_8_3_ _ _ _ _ _ _ _ _ _-,--
                                                -~~-"'--

National Board, State, Province, and Endorsements

Attachment II Page 24 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 7 /9/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 5000 Dominion Blvd., Glen Allen, Va. 23060 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit---------------------

Neme 5570 Hog Island Rd., Surry, Va. 23883 wo#oo331022-01, DCP 96-015, RR#96-049 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir_g=-1-*n_i_*a_P_o_w_e_r~---------- Type Code Symbol StaffiP _ _ _N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _Residual

_ _ _ _Heat ___ Removal B31.1 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Pipe NA NA NA 6"-RH-120-152 NA Replaced No Dubose National Pipe Energy Serv,Inc. HT# SW481 NA 6"-RH-120-152 NA Replacement No Valve Anchor/Darling NA NA 2-RH-108 NA Replacement No Tioga Pipe Branch Connection Supply Co. Ht # 435671 NA 6"-RH-120-152 NA Replacement No Tioga Pipe Elbow Supply Co. Ht # G0118 NA 6"-RH-120-152 NA Replacement No

   . Description of Work Replace piping and install new valve. Code case N-416-1 applies.

7

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0"'

Other D Pressure /fib;> psi Test Temp. >>or °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is BY. in. x 11 in., (2l informa-tion in items 1 through 6 on this report is included on each sheet, and (3l each sheet is numbered and the number of sheets is recorded at the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-525150(elbow), CNT-526404(valve), CNT-525276(branch),

9. R e m a r k s _ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . , , - - - -

Applicable Manufacturer's Data Reports to be attached CNT-52443l(pipe). Valve accepted for use on PTE # SA101022.AOO. CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A___________ Signed

          /I VII {L._
                   //<<b     .

Ownerb~esignee, Title X£:r:: ,:C;,<J{iw/64

                                                                                   ..                 Date _ _    ~'v'""T~{',,...<'a.,'jr.--£-?----, 19 9'¢ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                                           and employed by                    HSBI and I Co*                                          of Hartford, Ct*                                                                          :hJ~e i9:eected the components described in this Owner's Report during the period                                               QIO/Pc;to -r;uotY z                                     . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ----{-&-.      . ~. ....,t:1~...........*~--'._,_-""""-

lnspecwi:,;~

                                                          *_,_xx""*'-#/--'--/\.--
                                                                               \ _ _ _ Commissions _______        v_a_._3_3_3_ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date

Attachment I I Page 25 of 44 Serial No.: 96-310 Docket No.: 50-281

- 1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/4/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00341041-01, RR#96-051 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by Virginia Power Type Code Symbol Stamr _ _ _N_A_ _ _ _ _ _ __

Neme Authorization N o . - - = - = - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA_ _ _ _ _ _ _ _ _ _ _ __ Address Safety Injection

4. Identification of System B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs NA NA NA 2-SI-57 NA Replaced No Nuts NA NA NA 2-SI-57 NA Replaced No Studs Mackson, Inc. Ht# 60992 NA 2-SI-57 NA Replacement No Nuts Mackson, Inc. Ht# 703280 NA 2-SI-57 NA Replacement No

7. Description of Work Inspect bonnet fasteners and retorque bonnet.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-515124

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _~ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signed /{/_ ~d * * . _,

          ~ G . ; e ~ e e , Title 7.J'f                                   Date         --
                                                                                          'l4L.41..§ "f'                , 19 96 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                       and employed by                   HSBI and I Co*                                     of Hartford, Ct.

ii Y~ected the components described

                                                                                        '5"""0 Vr    7                , and state that to the best of my knowledge and belief, the ow*ner has performed examinations and taken corrective measures described in this Ow.ner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ---------/Y)-"""-1::=-~-,r-~          ....-,...~~~"'~*

____ Commissions _______v_a_.__8_8_3_ _ _ _ _ _ _ _ _ _ __ Ins~~~ National Board, State, Province, and Endorsements Date

Attachment 11 Page 26 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name Date _ _6/18/96 5000 Dominion Blvd., Glen Allen, Va. 23060 Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00340998-01, RR#96-055 Address Repair Organlz11tlon P.O. No., Job No., etc.

3. Work Performed by Vir9:inia Power Type Code Symbol Stamp _ _ _N.,,Ac,__ _ _ _ _ __

Name Authorization No. _ _NA _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address Chemical and Volume Control

4. Identification of System B3l.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _. Addenda, _ _ _ _ _ _ _ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19*__8_9 __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code

National .. Repaired; Stamped (Yes Name cif Name of Manufacturer .Board Other
Year Replaced, Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Part#

rim Assembly (plug) Copes-Vulcan 1i2742 NA 2-CH-HCV-2160 NA Replaced No Part#

rim Assembly (plug) Copes-Vulcan 132742 NA 2-CH-HCV-2160 NA Replacement No

7. Description of Work_o_v_e_rh_a_u_l_v_a_l_v_e*_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _:...__ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# SSY-328795

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ NA Certificate of Authorization No, _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Signed<il ~ ,J'/ Ownero(~sbesignee, Title

                                        '4:,At--'   .:.C5':C:                            Date _ _   ~.;z;;.
                                                                                                     ...-'=w~,;;=c~.,..1-.!r~----, 19 ;'6 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned,.holding .a valid commission issued by the National Board oLaQ.il.er and eressur..e Vessel Inspectors and the State V1rg1n1a                                                          HS~~ and~ co.

or Province o f . . , ,.. C and employed by , of ttarLi.oru, L. have insp~ed the components described in this Owner's Report during the period to £/; D,fY' 2 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 883

  ---..,-c........,~,.<'-l::::!>-'-'1r-'-'~-P-+f'l//.c"~=..;:=--*------Commissions _ _ _ _ _ _v_a_._ _ _ _ _ _ _ _ _ _ _ _ __
             ~pecfoMignature                                                            National Board, State, Province, and Endorsements Date_ _ _                 e,'-+'-__i;_.~L  __19 ?b I

~-*-~~~~~~~~~~~~------------------------------------------------ Attachment II Page 27 of 44 Serial No.: 96-310 Docket No.: 50-281
1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 7/17/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------,.-------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo336l89-01, RR#96-056 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_i_rg_i_*n_i_a_P_o_w_er---~------ Type Code Symbol StaffiP _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addre11

4. Identification of System _ _ _ _ Main

_ _Steam B31. l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built pr Replacement or No)

Studs NA NA NA 2-MS-GOV-005 NA Replaced No A&G Studs Engineering Ht. # GYU NA 2-MS-GOV-005 NA Replacement No

7. Description of Work_R_e_p_l_ac_e_s_t_u_d_s_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _;___ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. *

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# NS-267875

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No, ____N_A___________ Expiration Date ____N_A ____________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

                                                                                              ;0     inspected the components described in this Owner's Report during the period-------=~~~'-"'V'-"--~-to ,5:;                   I   'I)/9   "7
                                                                                                         ~                I and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the exami.nations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  --------'>*c:1[) _
                                          ...*...,.'-=-~=--'=-----Commissions _______V_a_._B_B_3_ _ _ _ _ _ _ _ _ _ __

_,_"=_""'-::-1*:-:~+-- Inspector's Signature National Board, State, Province, and Endorsements Date

Attachment II Page 28 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/12/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name

        . 5000 Dominion Blvd., Glen Allen, Va. 23060                                                    1             1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __

Addre11 Surry Power Station Two

2. Plant Unit--------------------

                                            . Name 5570 Hog Island Rd., Surry, Va. 23883                                             wo#oo334200-01, RR#96-058 Addresa                                                     Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g_i_*n_i_a_P_o_we_r....,..,_ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addre11 Safety Injection

4. Identification of System _ _ _ _ _ _- ' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

B31.1 55 NA N-1, N-7 5, (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification .of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component. Manufacturer Serial No. No. Identification Built or Replacement or Nol Studs NA NA NA 2-SI-P-lA *NA Replaced No Nuts NA NA NA 2-SI-P-lA NA Replaced No studs MackSOn, Inc. NA NA 2-SI-P-lA , NA Replacement No .

Nuts Mackson, Inc. NA NA 2-SI-P-lA NA Replacement No 7 . Description of Work Replace flange fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 I size is BY. in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/821 This Form (E00030I may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by .the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

                                                                                         ~>>n~ted the components described
                                                                                         'J I   t?,  7               , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                              /"'7/J <-="

(L'(Jc:{, 77;:- .., Va . 8 8 3

                                          ~ C o m m i s s i o n s _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date_ _ _(g=-t/~/_().+-/-19 f {:;

Attachment II Page 29 of 44 Serial No.: 96-310 Docket No.: 5D-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/18/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. Plant Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo341826-01, RR#96-o7o Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir...;g;;..i_n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address Safety Injection

4. Identification of S y s t e m - - - - - - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - -

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or No)

Stock# Valve Velan 06304640 NA 2-SI-85 NA Replaced No Stock# Valve Velan 06304640 NA 2-SI-85 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0 Other D Pressure Al(') P psi Test Temp. tJ OT °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81,1, in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-398539

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF.COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A________________________________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - r - c - - , , ; ; . ; - - - - - - h a v e inspected the components described in this Owner's Report during the period _ _ _ _ _ _,,_,....._"""""+-~+--to          ~/10/f       7                 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, nei,ther the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ~ - - ~ A <>"JtT;._ . Va. 883

  -----..L,=--'"--'d.-'~.-,,-,,_+-+-""'-"""~'-=------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

lspectbsgnature National Board, State, Province, and Endorsements Date

Attachment II Page 30 of 44 Serial No.: 96-310 Docket No.: SD-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/2/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - . , . , . . - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _____ 1 1 of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. P l a n t - - - - - - - - - - - , - - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#oo341101-01, RR#9G-011 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v __ir""g"-1-*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Stamp _ _ _N_A.:...__ _ _ _ _ __ Name NA Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ N_A_ _ _ _ _ _ _ _ _ _ __ Addreas Residual Heat Removal

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code , 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 8

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ 9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs Mackson, Inc. NA NA 2-RH-E-lA NA Replacement No Nuts Mackson, Inc. NA NA 2-RH-E-lA NA Replacement No

7. Description of Work Replace studs and nuts on 2-RH-E-lA.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in forni of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 & BNT-467064 (studs & nuts)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed~/~

              ~~s Deslgnee, Title LJ ~ tir                                                               Date-~-,..,:Z:.,.=C6",F"--"'2-~----, 19    9~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. have jnspec?,d Jde components described in this Owner's Report during the period / 3 to /0 //'l(T , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective.measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a Joss of any kind arising from or connected with this inspection. A~ ~- ,;-+"'

  --------,-tcnUU"'sp"'e~c1at"'ol"'-,,s'<-s~*,g"n--,Yr)1.a"'t-u"'re'-""*'q.

Va. 883

                                                                           ..Wf/".-,,'~~---Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

National Board, State, Province, and Endorsements Date

Attachment II Page 31 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/2/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#o0341706-01, RR#96-072 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir....;gc...i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol StaffiP _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ AddreH Residual Heat Removal

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 NA N-J., N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs Mackson, Inc. NA NA 2-RH-E-lB NA Replacement No Nuts Mackson, Inc. NA NA 2-RH-E-lB NA Replacement No

7. Description of Work Replace studs and nuts on 2-RH-E-lB.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informs*

tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded st the top of this form. (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E, 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 & BNT-467064 (studs & nuts)

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N _ A - - - - - - - - - - - - - - - - - - - - - - ~ - - - - - - - CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  ------------------------:--r-cc--r.:a:---:----have JjispecJed the components described in this Owner's Report during the period _ _ _ _ _........,!!-4t.6-,.c.....,,_.,....__ _ to         ,-~    "fY ::7           , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations. and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  --------~---__.__.....,,...,~~~--Commissions _ _ _ _ _ _ Va.                                         _ _ _883 National Board, State, Province, and Endorsements

Attachment I I Page 32 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7/17/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addre11 Surry Power Station Two

2. Plant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Unit-------------------- Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00341742-01, RR#96-074 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir-'g=-i-*n_i_a_P_o_w_er_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre1&

4. Identification of System _ _ _ _ Main

_ _Steam B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19, ___ __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturf!r Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA NA NA 2-MS-176 NA Replaced No Valve Anchor/Darling ET338-1-3 NA 2-MS-176 NA Replacement No Energy & Pipe Process Corp. Ht # N05751 NA 2-MS-176 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-393037 (valve), CNT-498645 (Pipe)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacture r's Data R sports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp ______N_A_______________________________ Signed

             . _//,

Certificate of Authorization No. ____N_A

                 , ~ *
                                               ~
                              £44, ./ ...£- S: L wner or Ollvr's Designee, Title

___________ Expiration Date _ _ _ _N_A Date--J:~-'~<'cz.;-f-~'~7_____ , 19 '}~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of

Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - ~ - ~ - = - - = - - - - h a v . e inspected the components described in this Owner's Report during the period                                           to   5//C:lf?                        , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ---------<="'~-~-'-~e-,

C::::-:--.

TT;.,. Va . 8 8 3

                                         ......~------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

nspector'sSi~ National Board, State, Province, and Endorsements Date

Attachment II Page 33 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7/17/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

1. Owner Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~

Addre11 Surry Power Station Two

2. Plant Unit---------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00341741-01, RR#96-075 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r-=g_i_n_i_a_Po_w_e_r_ _ _ _ _ _ _ _ _ __ Type Code Symbol Sta71J?---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System _ _ _ _Main _ _Steam B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, ________ Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __8_9 __

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, Identification Built or Replacement or No)

Valve NA NA NA 2-MS-178 NA Replaced No Valve Anchor/Darling ET338-1-3 NA 2-MS-178 NA Replacement No Energy & Pipe Process Corp. Ht # N0575, NA 2-MS-178 NA Replacement No Tioga Pipe Traceabili* y# Elbow Supply Co. V2930 NA 2-MS-178 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure [21' Other D Pressure Nf!,l psi Test Temp. /<JO C °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-393037 (valve), CNT-498645 (Pipe), CNT-496634 (elbow)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ NA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ NA NA Certificate of Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration D a t e - - - - - - - - - - - - - - - - Signed ~ ~,4-c: wnerorc5er7s Designee, Title "J;{:r 4... Date-~*... r-~"'",t~/~7_ _ _ _ _ , 19 96 CERTIFICATE OF INSERVICE INSPECTION I, the undersignef!,..holding ii valid commission issued by the National Board of B.cuJe.r and deressur.e. Vessel Inspectors and the State virginia HS~~ an ~ co. or Province of Hartford, Ct. and employed by of

.h;ve ip_J,Pected the components described in this Owner's Report during the period to ~c)/.L.7 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                             /70c-:-->                 -ft ,
                            ~ C o m m i s s i o n s _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Va. 883 Inspector's Signature National Board, State, Province, end Endorsements Date

 .*                                                                                                                                     Attachment II Page 34 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.                                                       7/17/96

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - - Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. P l a n t - - - - - - - - - - - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 wo#o0341872-01, RR#96-076 A-cl dress Repair Organization P.O. No., Job No., ate.

3. Work Performed by _ _v_i_rg'--1-*n_i_a_P_o_w_e_r.,,..,..._ _ _ _ _ _ _ __ Type Code Symbol Stawf---N:..;A~-------

Name Authorization No. _ _ _ _ _ _ _ _ _ _ _ _ __ Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System _ _ _ _ Main

_ _Steam B31.l 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA NA NA 2-MS-182 NA Replaced No Valve Anchor/Darling EB820-l-6 NA 2-MS-182 NA Replacement No Energy & Pipe Process Corp. Ht # N05751 NA 2-MS-182 NA Replacement No Elbow Hub, Inc. Ht# J9201 NA 2-MS-182 NA Replacement No

7. Description of Work Replace valve. Code Case N-416-1 applies.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure G;;j/

Other D Pressure ND A psi Test Temp. ,YOT"' °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# SNT-342351 & PTE # SU-90-00446, Rev.l (valve),

9. Remarks _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached SSY-427389 (elbow), CNT-498645 (pipe) CERTIFICATE OF COMPLIANCE We certify that the-statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ Signed C'?L~ 'A.LL £5::7° £&4,.,.d/d!

          ~;Zi,eror~;;&esignee, Title Date __,¥~--...,-~,;-L/~2-----,
                                                                                          ~                             19 ~°{.

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

                                                                                          ~e      spected the components described
                                                                                      ,s-; '0~97 7     )

0 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                ~~
  ------1,~-,,,.~-b--~~~"--...,,~------Commissions _ _ _ _ _ _ _                            Va.883 Inspector's Signature                                   National Board, State, Province, end Endorsements

Attachment II Page 35 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 7 /31/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Address Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00332778-Dl, RR#96-077 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir...:g:;..i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Sta{rf---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ AddreH Chemical and Volume Control

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped N*ame of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Relief Valve Crosby NA NA 2-CH-RV-2209 NA Replaced No Serial # Relief Valve Crosby N69963 NA 2-CH-RV-2209 NA Replacement No 0011 7, Description of Work Replace relief valve. 8, Tests Conducted: Hydrostatic Other D Pneumatic Pressure ;Vo; D Nominal Operating Pressure psi Test Temp. rl or if° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

 * (12/82)                   This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 I

L

FORM NIS-2 (Back) PO# SNT-346107

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statem.ents made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A ______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed()~ d ownerfr~ignee, Title

                                        .:Z-ff"                                  Date_~,~l=u...~y~.-..J..,1'------,, 19      U CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                     and employed by                     HSBI and I Co*                                    of Hartford, Ct.

have i"H>tcted ?~ c~mp~nents described in this Owner's Report during the period to ¢C?,~ :,?'. lcn-5, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                    ~ ~                      ~.                                              Va. 883
  ------t~~~'-"'"""-<.--C'~~,,__....,.~~~------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
                   ~ r ' s Signature                                            National Board, State, Province, and Endorsements Date                1/79 {;p             19,_*-

Attachment II Page 36 of 44 Serial No.: 96-310 Docket No.: 50-281

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 6/18/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 1 5000 Dominion Blvd., Glen Allen, Va. 23060 Sheet _ _ _ _ _ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power Station Two

2. P l a n t - - - - - - - - - - - - - , - , - - - - - - - - - - - - - Unit--------------------

N11me 5570 Hog Island Rd., Surry, Va. 23883 W0#00333229-0l, RR#96-078 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir_,ga:...i_n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ Containment

_ _ _ _ _Spray _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Coda 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 __ 89_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Bonnet Assembly ITT Grinnell NA NA 2-CS-27 NA Replaced No Stock # Bonnet Assembly ITT Grinnell 20800970 NA 2-CS-27 NA Replacement No

7. Description of Work Replace valve bonnet.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure (i2("

Other D Pressure Al tJ P psi Test Temp. IV Or ° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# SSY-231244

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A_______________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of

 -                   Hartford, Ct.
   ----------------------.,,,"""1~::-T:a..---:------ha~':/. in59ected the components described in this Owner's Report during the period                                       to     qLv/97                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                   ~~
   ----~~.,,,,.fL.-=--=--"-~---ji<--#-,IJ'<.-',:;.::'---=----Commissions _ _ _ _ _ _ _       Va.883
                    ~or'~                                                      National Board, State, Province, and Endorsements Date

Attachment II Page 37 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of.the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 6/18/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Address Surry Power St:ation Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00341271-01, RR#96-079 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_ir...;g:;,.1_*n_i_a_P_o_w_er.....,.,---------- Type Code Symbol Starop _ _ _N_A_ _ _ _ _ __

Name Authorization No. _ _ _ _ _ _ _ _ _ _.....;.._ __ Same as ab6ve Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Addre11 Vacuum Priming

4. Identification of S y s t e m - - - - - - - - - - - - - - - ' - - - - - - - - - - - - - - - - - - - - - - - - - -

B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Coda 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Valve NA NA NA 2-VP-12 NA Replaced No Raimondi Fig. 3026 Valve Valvole (6") *. NA *2-VP-12 , NA Replacement No

7. Description of Work_R_e_p_l_ac_e_v_a_l_v_e_._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Tests Conducted: Hydrostatic Pneumatic ~Nominal Operating Pressure D Other O Pressure 1" c* psi Test Temp. ,d.s-¥&,6,:e Z:::° F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered !Ind the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# CNT-466088, PTE # SA101014.A01

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to. the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A_______________________________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Expiration Date _ _ _ _N_A ___________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - ~ - ~ ; - : - , - - - - h a v7 i!1~cted the components described in this Owner's Report during the period                                       to    ~7'(q!Y7                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ---------'~.-C-.._......=.,._-,.__,c....L     _ _    _ _ _ commissions _ _ _ _ _ _ _      Va.

_ _883

Inspector's Signature National Board, State, Province, and Endorsements Date

Attachment II Page 38 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/12/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00331695-01, RR#96-o8o Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by __v_i_*r...:g::...i_n_i_a_Po_w_e_r....,.,._ _ _ _ _ _ _ __ Type Code Symbol Starop _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ __ Addren

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__ _ _

6. Identification of Components Repairea or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs NA NA NA 2-RC-SV-2551A NA Replaced No Nuts NA NA NA 2-RC-SV-2551A NA Replaced No Studs Mackson, Inc. NA NA 2-RC-SV-2551A NA Replacement No Nuts Mackson, Inc. NA NA 2-RC-SV-2551A NA Replacement No 7 . Description of Work Replace flange fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (nuts), BNT-467064 (studs)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _N_A ________________________________

                                    -~--N_A___________ Expiration Date _ _ _ _N_A                       ___________

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of

Hartford, Ct.

  -----------------------------,,------,1-=,--,----have ~ected the components described in this Owner's Report during the period                                             5;;2ij7                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this

Attachment II Page 39 of 44 Serial No.: 96-310 Docket No.: 50-281

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

1. O w n e r - - - - - - - - - - - - - - - - - - - - - - -

Name 6/12/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. P l a n t - - - - - - - - - - , . . . , - - - - - - - - - - - - - - Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#oo331696-0l, RR#96-081 Address Repair Organization P.O. No., Job No., ate.

3. Work Performed by __v_i_*r...:g:....i_n_i_a_P_o_w_e_r--:-:---------- Type Code Symbol StaffiP----=N...;.A:...__ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ AddreH

4. Identification of System _ _ _ _ Reactor

_ _ _Coolant B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 8

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19__9_ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Studs NA NA NA 2-RC-SV-2551B NA Replaced No Nuts NA NA NA 2-RC-SV-2551B NA Replaced No Studs Mackson, Inc. NA NA 2-RC-SV-2551B NA Replacement No Nuts Mackson, Inc. NA NA 2-RC-SV-2551B NA Replacement No

7. Description of Work Replace flange fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650 (nuts), BNT-467064 (studs)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ N_A________________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed /,;'l-~ ,./

         ~~ee,Title
                                         .LS:Z:                                           ,7_~ /,Z...

Date---1,.,,,_~~-""""----'--='------, 19 96 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. ha i~~cted the components described

                                                                                      .I:,'I   0f '97                , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                                   ~            "7ft-/\
  ------+-----cr--+-'_"-+_-,.......,_+-_,vt.A.~~~1~

ioeeto,,;~

                                                     //_-__"" commissions _ _ _ _ _ _ _Va.          883 National Board, State, Province, and Endorsements Date

Attachment II Page 40 of 44 Serial No.: 96-310 Docket No.: 50-281

1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR RE::PLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 6/12/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00331697-01, RR#96-082 Addresa Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g;;..i_*n_i_a_P_o_w_er

_ _ _ _ _ _ _ _ __ Type Code Symbol Starop _ _ _N_A_ _ _ _ _ __ Name Authorization N o . - - : - : ~ - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addreas Reactor Coolant

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Casa 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or Nol Studs NA NA NA 2-RC-SV-2551C NA Replaced No Nuts NA NA NA 2-RC-SV-2551C NA Replaced No Studs Mackson, Inc. NA NA 2-RC-SV-2551C NA Replacement No Nuts Mackson, Inc. NA NA 2-RC-SV-2551C NA Replacement No 7 . Description of Work Replace flange fasteners.

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure 0 Other D Pressure ______ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91 L

FORM NIS-2 (Back) PO# BNT-467650 (nuts), BNT-467064 (studs)

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ s*o*d~ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct. ha* insP.ected the components described

                                                                                                 ~-I o/f'7

( , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _______,_/7).,..........,.,.....,........1........ --~----Commissions _ _ _ _-,-__V-,-a_.__B_B_3____________

                    ~S ~
                                               --+-/J+--~~--
                                                     ~

National Board, State, Province, and Endorsements

Attachment II Page 41 of 44 Serial No.: 96-310 Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7 /16/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00339448-0l, RR#96-087 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _v_i_r_g_i_n_ia_P_o_w_e_r--,----------- Type Code Symbol Staffie _ _ _N_A_ _ _ _ _ __

Name Authorization N o . - - , : : - - - - - - - - - - - - - - Same as above Expiration Date _ _ _N_A_ _ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _Steam

___ Generator Nitrogen B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, ________ Addenda, ________ Code Casa 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Pipe NA NA NA 2-GN-1 NA Replacement No Pipe NA NA NA 2-GN-2 NA Replacement No Pipe NA NA NA 2-GN-3 NA Replacement No

   . Description of Work   Cut and reweld piping downstream of ASME Class boundary valves.               Code case N-416-1 applies.

7

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure ~

Other D Pressure uoi? psi Test Temp. A!(:J;*" °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) None

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _ N_A_______________________________ Certificate of Authorization No. ____N_A___________ Expiration Date ____N_A ___________ Signed C?__ Jf1 ,/)_

i/ ..:zs:r-

          ~~~e, Title Date_~l.h=M~4-~~L-b~---, 19                 96, CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                      and employed by                   HSBI and I Co*                                    of Hartford, Ct.
  ------------------------=~-;::--r;;,.;--;-----har, i~spected the components described in this Owner's Report during the period------~+-'~-+-~-to                             ,:Z/qL9     7               , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                 /71/        C,             cy-,-_

Va. 883

  ----+l/M,c...--""'---'1'--~~-s..-L--=-=--'--------Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Inspector's Signature National Board, State, Province, and Endorsements Date

Attachment II Page 42 of 44 Serial No.: 96-310 "*- Docket No.: 50-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 6/12/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ _ ~ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00342564-ol, RR#96-089 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir-'g;;;.1._*n_i_a_P_o_w_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol Stawf---N_A_ _ _ _ _ _ __

Name Authorization N o . - - - , - - - - - - - - - - - - - Same as above Expiration Date _ _ _ NA_ _ _ _ _ _ _ _ _ _ __ Address

4. Identification of System _ _ _ _ Recirculation

_ _ _ _ _ _Spray _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ B31.l 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Coda Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes

          . Component           Manufacturer                   . Serial No.          No.          Identification     Built   or Replacement or No)

Studs NA NA NA 2-RS-MOV-255A NA Replaced No Studs Mackson, Inc. NA NA 2-RS-MOV-255A NA Replacement No 5

7. Description of Work_R_e_p_la_c_e__s_t_u_d_s_.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is SY. in. x 11 in., (21 informa-tion in items 1 through 6 on this report is included on each sheet, and (31 each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (EOD030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# BNT-467650

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicabl.e Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the repair or replacement ASME Code, Section XI. Type Code Symbol Stamp _ _ _ _ _ _N_A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _--'- Certificate of Authorization No. ____N_A___________ Expiration Date _ _ _ _N_A ___________ Signed ~ ~ .V 'Ai?-/'

          ~ n ~ D e s i g n e e , Title
                                          -Z:'>1.r                                  Date _  __.J;;.:...._....~o,<....--=-/~=-----, 19 fr,/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigne.d,., holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of virginia and employed by HSBI and I Co. of Hartford, Ct. have4'.nspficted the components described in this Owner's Report during the period to ~Dry Z . , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinatio.ns and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  ---------'~cc=.<-t"'6"-'-~£~             .....~~--*~----Commissions _______v_a_._B_B_3_ _ _ _ _ _ _ _ _ _ __

lnspectorsSignature National Board, State, Province, and Endorsements Date_ _b=-+-({,___J..--+--1_ 1 / ( 0

 .                                                                                                                               Attachment II Page 43 of 44

... Serial No.: 96-310 Docket No.: 50-281
1. Owner FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co.

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 7/17/96 Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 wo#00331267-02, RR#96-092 Address Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g_i_*n_i_a_P_ow_e_r-,---------- Type Code Symbol Staffie _ _ _N_A_ _ _ _ _ _ __

Name Authorization N o . - - - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addresa

4. Identification of System _ _ _ _ Reactor

_ _ _ Coolant B31.1 55 NA N-1, N-7

5. (al Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (bl Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Primary Drawing# Manway Studs(2 ea.) Westinghouse 1873E97, R,v.1 NA 2-RC-E-lA NA Replaced No Primary Drawing# I anway Studs (2 ea.) Westinghouse 1873E97, R,v.1 NA 2-RC-E-lA NA Replacement No

7. Description of Work Replace manway studs*

8. Tests Conducted: Hydrostatic Pneumatic D Nominal Operating Pressure D Other D Pressure _ _ _ _ _ psi Test Temp, °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1 l size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form; (12/82) This Form (E00030) may be obtained from the Order Dept,, ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

*~

FORM NIS-2 (Back) PO# ET-41822

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp ______N_A________________________________ Certificate of Authorization No. ____N_A ___________ Expiration Date _ _ _ _N_A ____________ Signed (l-i{: ,;;J_ ~ :z:J':r Lu~ . ,.&;£ Owner or ~Designee, Title '

                                                                                                  "-"-"'f~l~Z_ _ _, 19 Date_~,......z;:,""'.                         U CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia                      and employed by                    HSBI and 1 Co*                                      of Hartford, Ct.

--~-:---:---:--::---:--:---:--~~--:-:-------:;;;~~~~~'~;----:;h~! insp_:.c!,l!~he components described in this Owner's Report during the period to W, 2 ~t'f'7 , and state that to the best of my knowledge and belief, the Owner has perf rmecfexamination/and <aken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

  --------"=""""'"+--,!(_.
                              ;vJ ~-              ~

Va. 883

                                /'--*-~_,__,_F-":::.w:--'<C."----Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _--:::--:------

l~or'sSign~ National Board, State, Province, and Endorsements Date_ _ __,_7;-+-'U)=---r-cf_19 Lb

Attachment II Page 44 of 44 Serial No.: 96-310 Docket No.: SD-281 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Virginia Electric and Power Co. 7/17/96

1. Owner Date _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Name 5000 Dominion Blvd., Glen Allen, Va. 23060 1 1 Sheet _____ of _ _ _ _ _ _ _ _ _ _ _ _ __ Addre11 Surry Power Station Two

2. Plant Unit--------------------

Name 5570 Hog Island Rd., Surry, Va. 23883 W0#00330842-02, RR#96-093 Addre11 Repair Organization P.O. No., Job No., etc.

3. Work Performed by _ _ v_ir_g_i_*n_i_a_P_ow_e_r_ _ _ _ _ _ _ _ __ Type Code Symbol StaffiP _ _ _NA _ _ _ _ _ _ __

Name Authorization N o . - - : , ; : : - - - - - - - - - - - - - Same as above Expiration Date _ _ _NA _ _ _ _ _ _ _ _ _ _ __ Addre11 Reactor Coolant

4. Identification of System _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ___:._ _

B31.1 55 NA N-1, N-7

5. (a) Applicable Construction Code 19 ___ Edition, _ _ _ _ _ _ _ Addenda, _ _ _ _ _ _ _ Code Case 89 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 ___ _

6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)

Primary Drawing# Manway Studs(4 ea.) Westinghouse 1873E97, R,v.1 NA 2-RC-E-lC NA Replaced No Primary Drawing# I anway Studs (4 ea.) Westinghouse 1873E97, R,v.1 NA 2-RC-E-lC NA Replacement No

7. Description of Work Replace manway studs.

8. Tests Conducted: Hydrostatic Pneumatic O Nominal Operating Pressure 0 Other O Pressure _ _ _ _ _ psi Test Temp. °F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is BY. in. x 11 in., (2) informs*

tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form .

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 REPRINT 12/91

FORM NIS-2 (Back) PO# ET-41822

9. R e m a r k s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Section XI. repair or replacement Type Code Symbol Stamp _ _ _ _ _ _ N_A________________________________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Virginia and employed by HSBI and I Co* of Hartford, Ct.

  - - - - - - - - - - - - - - - - - - - - - - - - - = - - , - - - - , ~ - . , - - - - h a y e i_Espected the components described in this Owner's Report during the period                                         to   2/(/t?lfZ                    , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                                 ~~                                                           Va. 883
  --------+-=--""'---,.....,*"A--L...,!1--J._-""-'"'------Commissions _ ___,_...,...,......_,.....,,------,------------

l ~ s~ a t ~ National Board, State, Province, and Endorsements Date 7 JI k't-/ 19 ?b

*}}

ML18151A438: Difference between revisions

Latest revision as of 04:14, 23 February 2020

Text

Navigation menu

ML18151A438: Difference between revisions

Latest revision as of 04:14, 23 February 2020

Text

Navigation menu

Search