ST-HL-AE-1837, Forwards Requests for Relief RR-ENG-02,03,04 & 05 from ASME Section XI Inservice Insp Requirements.Submittals Identify Section XI Preservice Insp Exam Requirements Impractical to Perform & Provide Supporting Justification for Each Requ
ML20215C784 | |
Person / Time | |
---|---|
Site: | South Texas ![]() |
Issue date: | 12/09/1986 |
From: | Wisenburg M HOUSTON LIGHTING & POWER CO. |
To: | Noonan V Office of Nuclear Reactor Regulation |
References | |
CON-#486-1892 OL, ST-HL-AE-1837, NUDOCS 8612150409 | |
Download: ML20215C784 (74) | |
Text
l The Light NE U 1louston Lighting & Power P O. Box 1700 llouston, Texas 77001 (713)228-9211 December 9, 1986 ST-HL-AE-1837 File No.- T07.03 Mr. Vincent S. Noonan, Proj ect Director PWR Project Directorate #5 U. S. Nuclear Regulatory Commission Washington, DC 20555 South Texas Project Units 1 and 2 Docket Nos. STN 50-498, STN 50-499 Preservice Inspection Program
Dear Mr. Noonan:
As discussed with members of the NRC staff (P. Kadambi, G. Johnson),
enclosed are four (4) requests for relief (RR-ENG-02, -03, -04, and -05) from ASME Section XI inservice inspection requirements for your review and approval. These submittals identify Section XI preservice inspection (PSI) examination requirements which have been determined to be impractical and provide supporting technical justification for each request for exemption from Code examination requirements.
Although the need for additional exemptions is anticipated during the remaining STPEGS-1 PSI examinations, subsequent requests will be submitted if the need arises.
If you should have any questions on this matter, please contact Mr.
J. S. Phelps at (713) 993-1367.
Very truly yours, M. R. Wis nburg Deputy Pr ect Man < er RLB/JSP/yd Attachments: (1) PSI Relief Request RR-ENG-02 (2) PSI Relief Request RR-ENG-03 (3) PSI Relief Request RR-ENG-04 (4) PSI Relief Request RR-ENG-05 0 o0 O
OgA21R@$8d$I>he G
I/
- ST-HL-AE-1837 Houston Lighting & Power Company File No.: T07.03 P e2 cc:
Hugh L. Thompson, Jr. , Director T.V, Shockley/R.L. Range Division of PWR Licensing - A Central Power & Light Company Office of Nuclear Reactor Regulation P.O. Box 2121 U.S. Nuclear Regulatory Commission Corpus Christi, TX 78403 Washington, DC 20555 O. Backus/J. E. Malaski Robert D. Martin City of Austin Regional Administrator, Region IV P.O. Box 1088 Nuclear Regulatory Commission Austin, TX 78767 611 Ryan Plaza Drive, Suite 1000 Arlington, TX 76011 J. B. Poston/A. vonRosenberg City Public Service Board N. Prasad Kadambi, Project Manager P.O. Box 1771 U.S. Nuclear Regulatory Commission San Antonio, TX 78296 7920 Norfolk Avenue Bethesda, MD 20814 Brian E. Berwick, Esquire Assistant Attorney General for Dan R. Carpenter the State of Texas Senior Resident Inspector / Operations P.O. Box 12548, Capitol Station c/o U.S. Nuclear Regulatory Austin, TX 78711 Commission P.O. Box 910 Lanny A. Sinkin Bay City, TX 77414 Christic Institute 1324 North Capitol Street Claude E. Johnson Washington, D.C. 20002 Senior Resident Inspector /STP c/o U.S. Nuclear Regulatory Oreste R. Pirfo, Esquire Commission Hearing Attorney P.O. Box 910 Office of the Executive Legal Director Bay City, TX 77414 U.S. Nuclear Regulatory Commission Washington, DC 20555 M.D. Schwarz, Jr. , Esquire Baker & Botts Citizens for Equitable Utilities, Inc.
One Shell Plaza c/o Ms. Peggy Buchorn Houston, TX 77002 Route 1, Box 1684 Brazoria, TX 77422 J.R. Newman, Esquire Newman & Holtzinger, P.C. Docketing & Service Section 1615 L Street, N.W. Office of the Secretary Washington, DC 20036 U.S. Nuclear Regulatory Commission Washington, DC 20555 Director, Office of Inspection (3 Copies) and Enforcement U.S. Nuclear Regulatory Commission Advisory Committee on Reactor Safeguards Washington, DC 20555 U.S. Nuclear Regulatory Commission 1717 H Street Washington, DC 20555 Revised 11/12/86 Ll/NRC/bn
I ATTACHMENT I
- ST HL AE 1837
_P. AGE 1 OF 2-HOUSTON LIGHTING AND POWER COMPANY SOUTH TEXAS ELECTRIC GENERATING STATION UNITS 1 AND 2 DOCKET NOS. STN 50-498, STN 50-499 REQUEST FOR RELIEF FROM ASME BOILER AND PRESSURE VESSEL CODE, SECTION XI REQUIREMENTS RELIEF REQUEST NO. RR-ENG-02 Reference Code: ASME Boiler and Pressure Vessel Code,Section XI, 1974 Edition Through Summer 1975 Addenda for Weld Selection and 1980 Edition through Winter 1981 Addenda for NDE Requirements I. Components for Which Exemption is Requested:
(a) Name and Identification Number: One circumferential butt weld (16-SI-1301-27) and portion of adjacent longitudinal pipe weld (16-SI-1301-27LU) in Train C of 16 inch Safety Injection Recirculation Sump piping.
(b) Function: See Section 6.3 of the STPEGS FSAR.
(c) Class: ASME Class 2.
(d) Number of Components: One circumferential pipe weld and 2.5T (T = pipe wall thickness) of adjacent longitudinal pipe weld per unit.
(e) Fabrication NDE: Radiographic examination (RT)
II. NDE Requirement For Which Relief Is Requested:
Liquid penetrant (PT) surface examination of one circumferential weld and 2.5T of adjacent longitudinal weld.
III. Basis For Relief Request:
NRC regulation 10CFR50.55a (b)(2)(iv) requires that the extent of PSI /ISI examination of Class 2 piping welds of emergency core cooling (ECC) systems be determined in accordance with the rules of IWC-1220; Table IWC-2520, Category C-F and C-G; and IWC-2411 of the 1974 Edition thrcugh the Summer 1975 Addenda (74S75)Section XI Code. These rules require that welds be selected for exam-ination such that the equivalent of one stream of a multiple stream system be examined. The STPEGS Safety Injection (SI) system contains three trains of recirculation piping providing long term cooling suction to the SI pumps from each of the three containment sumps. These suction lines are NPS16, 0.375 inch wall thickness, and fabricated from SA-358 stainless steel material. The PSI examination method is surface examination under 80W81 Section XI rules.
S3/E010/S10
ATTACHMENT l ST HL AE-1831 PAGE 1 OF 2.
Each of the three SI sump suction lines contains an inaccessible circumferential weld located within the guard pipe at the containment penetration. The guard pipe does not permit access to the flued head-to process pipe weld for the required PT examination. One of these three inaccessible welds is required to be examined under our PSI program. Weld number 27 of Train C (16-SI-1301-27) was selected for PSI examination.
The SI sump suction piping of each train between the sump and the normally closed containment isolation valve is "open ended" piping that will not contain water under normal plant operating conditions. Such piping may be exempted from volumetric and surface examination under the rules of Code Case N-408 (approved by NRC for ISI use under Regulatory Guide 1.145, Rev. 4). Since we intend to invoke Code Case N-408 for our ISI program, the welds in the open ended portion of SI, including the unaccessible welds inside the guard pipe, will not be examined during the initial 10 year inservice inspection interval.
In summary, HL&P requests relief from the Section XI requirement to perform surface examination on the flued head-to pipe circumferential weld and 2.5T of adjacent longitudinal pipe weld of Train C of the SI sump recirculation suction (weld numbers 16-SI-1301-27 and -27LU) because (1) the welds are inaccessible for examination inside the guard pipe and (2) the welds will be exempted from volumetric and surface examination during ISI (thereby obviating the need for a PSI examination). Additionally, the structural integrity of the welds has been verified by the RT examination performed under the construction NDE program.
IV. Alternative Examination:
No alternative examinations are proposed in lieu of the PT examination for which relief is requested. HL&P has evaluated performing a PT examination on the inside surface of the inaccessible welds from the open end of the suction line at the sump. However, HL&P does not believe the inside surface PT examination provides sufficient additional assurance of structural integrity to warrant its performance, especially in light of the construction NDE and ISI exemption considerations discussed above.
V. Applicability and/or Schedule:
Relief from ASME Section XI PSI examination requirements (ie, PT surface examina-tion) is requested for the inaccessible flued head-to pipe circumferential weld l
and 2.5T of adjacent longitudinal weld of the SI recirculation sump piping as specified herein for STPEGS - 1 and STPEGS - 2.
t i
f i
S3/E010/S10
, _PAGE I OF A HOUSTON LIGHTING AND POWER COMPANY SOUTH TEXAS ELECTRIC GENERATING STATION UNITS 1 AND 2 DOCKET NOS. STN 50-498, STN 50-499 REQUEST FOR RELIEF FROM ASME BOILER AND PRESSURE. VESSEL CODE, SECTION XI REQUIREMENTS RELIEF REQUEST NO. RR-ENG-03 Reference Code: ASME Boiler and Pressure Vessel Code,Section XI, 1980 Edition through Winter 1981 Addenda I. Components for Which Exemption is Requested:
(a) Name and Identification Number: Steam generator, main steam nozzle, inside radius section examination.
(b) Function: See Section 10.3 of the STPEGS FSAR.
(c) Class: ASME Class 2.
(d) Number of Components: Eight (8) nozzles (one/ generator /
unit).
(e) Fabrication NDE: Ultrasonic (UT) and magnetic particle (MT) examination.
II. NDE Requirement for Which Relief is Requested:
Volumetric (i.e., ultrasonic (UT]) examination of nozzle inside radius section as required by Table IWC-2500-1, examination category C-B, item number C2.22 of 80W81 Section XI Code.
III. Basis for Relief Request:
Section XI requires volumetric examination of the inside radius section of nozzles greater than NPS12 in Class 2 vessels to verify their structural integrity. The inside radius section of these nozzles are considered susceptible to flaw initiation and growth due to the high thermal and mechanical stresses associated with the vessel and connected piping systems. In the case of STPEGS steam generator main steam nozzles, the nozzle is a one-piece forging containing a set of seven holes bored parallel to the nozzle centerline. A flow restrictor is installed in each of these holes. Since the ligaments between the holes distribute the stresses throughout the nozzle forging, there is no high-stress, inside radius section for the STPEGS main steam nozzle design. Therefore, the Section XI nozzle inside radius section examination requirements are not applicable to the STPEGS main steam nozzles.
P2/50-498.RLB.kd
' ATTACHMENT /
ST HL AE-18b1
_P .GE A OFJL IV. Alternative Examinations:
No alternative examinations are proposed ~ in lieu of the volumetric examination for which relief is requested.
. V. f.pplicability and/or Schedule:
Relief from ASME Section XI. PSI and ISI examination requirements of volumetric examination of the steam generator main steam nozzle inside radius section is requested for STPEGS-1 and STPEGS-2.
f i
i t
4
}
1 P2/50-498.RLB.kd f
, , - , ,, ,~.-- , ..-y. ~, - , , - - . .-,-_-.---,,---w, --c,,.,- . - , , . . - ,-w--,--- -----,,,.m w.--e. - ~ . _c- 7,- ,-,-wm.- - , - - - -
,-,eyv- e .
I ATTACFDAENT ST HL AE If PAGE 1 0F HOUSTON LIGHTING AND POWER COMPA!W SOUTH TEXAS ELECTRIC GENERATING STATION UNITS 1 AND 2 DOCKET NOS. STN 50-498, STN 50-499 REQUEST FOR RELIEF FROM ASME BOILER AND PRESSURE VESSEL CODE, SECTION XI REQUIREMENTS RELIEF REQUEST NO. RR-ENG-04 Reference Code: ASME Boiler and Pressure Vessel Code,Section XI, 1980 Edition through Winter 1981 Addenda I. Components for Which Exemption is Requested:
(a) Name and Identification Number: Reactor Pressure Vessel (RPV).
(b) Function: See Section 4 of the STPEGS FSAR.
(c) Class: ASME Class 1.
(d) Number of Components: Various pressure retaining welds and examination areas as described in Attachments RR-ENG-04-01 and -02.
(e) Fabrication NDE: Radiographic (RT), ultrasonic (UT), and surface (PT/MT) examination of RPV welds and UT and MT examination of studs and nuts.
II. NDE Requirement for Which Relief is Requested:
Relief from full ultrasonic examination coverage of the welds and examination areas described in Attachments RR-ENG-04-01 and -02.
III. Basis for Relief Request:
The STPEGS-1 RPV walds and examination areas (e.g. , nozzle inside radius, studs, etc.) were fully examined during PSI by the applicable examination methods specified in ASME Section XI and Regulatory Guide 1.150 except for the ultrasonic examination coverage limitations described in Attachments RR-ENG-04-01 and
-02. The component configurations and geometric conditions which precluded full coverage as well as the percentage of coverage obtained for each weld / area and beam component are documented in the attachments. All RPV welds and examination areas were examined to the maximum extent practical within the limitotions of component configuration and geometry and the linitations of the examination equipment and techniques utilized for the PSI program. We believe the extent of ultrasonic examination coverage obtained for each of the RPV welds and examination areas listed in Attachments RR-ENG-04-01 and -02 constitutes an 1 acceptable level of coverage which is consistent with the intent
] of ASME Section XI and Regulatory Guide 1.150.
P2/ENG-04.kd
ATTACHMENT ST HL AE- it 3 PAGE ds OFIg IV. Alternative Examinations:
Supplemental ultrasonic examinations were performed in accordance with Regulatory Guide 1.150 criteria as described in Attachment RR-ENG-04-01. Supplemental ultrasonic examination was performed on RPV nuts as described in Attachment RR-ENG-04-02.
V. Applicability and/or Schedule:
Relief from ASME Section XI PSI ultrasonic examination coverage requirements is hereby requested for the STPEGS-1 RPV welds and examination areas described in Attachments RR-ENG-04-01 and RR-ENG-04-02.
Attachments (2)
P2/ENG-04.kd
F J. ,J. An ,w - - - -, -- __ - + - -. A a.a -
ATTACHMENT 3 ST-HL AE 1J39 PAGE 3 OFig ATTACHMENT RR-ENG-04-01 APPENDIX J PRESERVICE EXAMINATION LIMITATIONS FOR THE REACTOR PRESSURE VESSEL i
e I
i
--e- .w,e--r-,,--v- -- . ..w.. cwr--.,,,,wr.,p-,.,-. ., , ,+,%-, re _m,-,.%.>+-,,w,3r,+,-wv,n,-,- ,,,rn, w e m e, mew.,,w,-w,,,,- .f7- - -y----e-,.m.-
ATTACFDAENT 3 ST HL-AE- /837 PAGE 4 OF lg APPENDIX J PRESERVICE EXAMINATION LIMITATIONS FOR THE REACTOR PRESSURE VESSEL
- 1. Introduction Limitations to examination coverage were experienced during the mechanized PSI of the South Texas Project Generating Station (STP), Unit 1, Reactor Pres-sure Vessel (RPV) and are generically identified in the Examination Summary Table of this Final Report. The purpose of this appendix is to further define and quantify the examination limitations as required by the U.S. NRC Regulatory Guide 1.150.
Two generic types of limitations to examination coverage were encountered during the PSI of the STP 1 RPV welds and components:
(1) Component geometric interference with the scanning equipment and (2) Geometric shadowing of examination areas.
SwRI procedures implemented during the STP 1 RPV examinations met or exceeded the requirements of ASME Section XI 1980 Edition with Addenda through Winter 1981 as well as U.S. NRC Regulatory Guide 1.150, Revision 1. SwRI proce-dures required examination of 100 percent of the length of all shell and head welds and this baseline examination coverage was achieved with very few excep-tions where accessibility limitations were encountered. SwRI procedures also required full vee path calibration of the 45-degree shear wave scans to compen-sate for noise encountered in the near surface interface and limitations due to geometric shadowing. Those examination volumes which received other than 100 percent of the weld and base metal coverage are identified herein. Gene r-ally, interface noise inhibited resolution capabilities at the beam entry surface for about 1/2-inch depth with the 45-degree and 60-degree shear waves and about 2 inches of depth for the 0-degree longitudinal wave. In the core belt region and nozzle bores, the inside surface volumes were examined with supplemental 50/70-degree dual iongitudinal beam search units. Throughout the vessel, 45-degree full vee path scans were utilized to examine the inside surface volume.
- 2. Description of Limitations The attached Table 1 and Figures 1 through 6 detail the examination cover-age attained during the STP 1 RPV PSI. Specifically, the tables quantify the coverage in terms of percent of Code-required examination volume which was effectively covered with each beam component. The accompanying figures graphi-cally depict the location and extent of the limitations with respect to weld cetal and associated base material. The computed values for percent coverage do not include any consideration for beam spread except in the case of the single scan with three beams of the shell-to-flange weld from the flange seal surface. The percent coverage values for the 50/70-degree examinations (of circumferential and longitudinal welds, of nozzle bore regions, and of nozzle J-l
ATTACFMAENT 3 ST.HL AE 1837
. PAGE 5 0Fl3 inner radius sections) are calculated based on oepth of calibration as speci-fled ir; the procedure. The 50/70 examinations in the case of the core belt region weld scans should be considered as supplemental to the Code-specified 45- and 60-degree examinations.
2.1 RPV Lower Head Welds The Lower Head Dollar Plate Weld, No. RPVl-102-151, received a limited examination due to interference from the in-core instrumentation tubes.
Figure 1 depicts the inside surfaces not accessible to the search units.
Table 1 identifies the volume of weld and base material examined with each search unit beam angle. It should be noted that the ASME Code recognizes the inherent limitations to lower head weld examinations imposed by the instrumenta-tion tubes and specifies that 100 percent of the " accessible". of these welds shall be examined. Nevertheless, the percent coverage identified in Table 1 is calculated in terms of full weld length.
Portions of the Lower Head Meridional Welds, Nos. RPV1-101-154A through D, rare also inaccessible due to interference from the instrumentation tubes, but 's a much lesser degree as shown in Figure 1 and Table 1.
2.2 [ Circumferential Shell Welds The examination of the Lower Head-to-Lower Shell Weld, No. RPV-101-141, was limited due to interference from the core support and antirotation lugs. Figure 1 is a rollout view of the scan surface limitations. Table 1 <
lists the coverage for each beam component in terms of percent of total weld and base metal examination volume.
No limitations were experienced during examination of the Lower Shell-to-Middle Shell Circumferential Weld, No. RPVl-101-171, nor during examination cf the Middle Shell-to-Upper Shell Circumferential Weld, No. RPVl-103-121.
Limitations to the examination of the Upper Shell-to-Flange Weld, No. RPV1-101-121, were due to interference from the flange taper on one side and the outlet nozzle integral extensions on the other side. These were very small limitations to scanning. Weld No. RPVI-101-121 was also examined by three beams oriented nearly normal to che weld plane from the flange seal sur-face with no limitations to scanning. Figure 2 shows the scanning limitations due to the outlet nozzle integral extensions.
2.3 RPV Longtitudinal Shell Walds No limitations were experienced during examination of the Lower Shell Course or Middle Shell Course Longitudinal Welds, Nos. RPVl-101-142A through C and RPVl-101-124A through C. Examination of the Upper Shell Longi-tudinal Welds, Nos. RPVl-101-122A through C, were limited due to interference from adjacent or intersecting nozzles as shown on Figure 3. Table 1 quantifies those limitations. It should be noted that the longitudinal weld examination
' limitations were ameliorated to some extent during the nozzle-to-shell weld examinations although search unit skew angles varied from parallel and trans-verse to the longitudinal weld planes.
3-2
=- - -. .
ATT ACHMENT 3 ST-HL- AE- I 83 'l PAGE & OF/1 2.4 Nozzle-to-Shell Welds The inlet and outlet nozzle-to-shell welds were examined from the :
vessel shell and from the nozzle bore. Transverse examinations performed from !
the vessel wall were limited on the nozzle forging side of the weld due to the nozzle configuration. Nozzle configuration also shadowed the straight-beam and angle-beam examinations performed from the nozzle bores as shown in Figures 4 and 5. The Code-defined nozzle inner radius sections were nevertheless covered quite adequately using 50/70-degree search units in the nozzle bores and on the blend itself in the case of the inlet nozzles. Table 1 lists the coverage achieved with each search unit beam component.
2.5 Closure Head Welds Examinations of the RPV Closure Head Welds were performed using manual ultrasonic techniques from the outside surface. Examination of the Torus-to-Flange Weld, No. RPVl-101-101, was limited on the flange side due to the flange configuration. Examination of the Torus-to-Dome Weld, No. RPV1-j 103-101, was limited due to interference from the insulation support ring and from the head lifting lugs. The locations of the closure head weld examina-tions are shown on Figure 6 and the extent of limitations are quantified in Table 1.
3 Conclusions Limitations to coverage of ASME Code-required examination volumes were experienced during the STP 1 RPV PSI examinations due to component configuration and interference by vessel attachmente. These limitations are identified in the figures and table provided in this appendix. The limitations were minimized to the maximum extent possible by virtue of extensive baseline indexing of the vessel. In cases where limitations were experienced, the examinations were supplemented by additional scans using alternate sound beam components to enhance overall coverage.
s 1
l
[
J-3
ATTACHMENT 3 ST HL-AE /83?
PAGE 7 OF If Table 1 RPV EXAMINATION COVERAGE Weld Description Exam Percent of Figure and Weld No. Angle Volume Examined No.
RPV Lower Head Welds:
RPV1-102-151 0* 19.71 1 45' 65.23 1 45* Vee 73.45 1 60* 55.72 1 45'T 49.75 1 60*T 49.20 1 RPV1-101-154A 0* 68.96 1 45' 69.74 1 45' Vee 68.96 1 60* 74.25 1 45'T 70.84 1 60*T 68.67 1 RPV1-101-154B O' 82.76 1 45' 82.76 1 -
45' Vee 82.76 1 60* 82.76 1 45'T 85.42 1 60*T 84.28 1 RPV1-101-154C 0* 65.53 1 45* 65.53 1 45' Vee 65.53 1 60* 65.53 1 45*T 70.84 1 60*T 68.67 1 RPV1-101-154D O' 82.76 1 45' 82.76 1 45* Vee 82.76 1 60* 82.76 1 45'T E5.42 1 60*T 84.28 1 I
I J-4
I ATTACHMENT ST-HL AE- 10 PAGE 3 OF /
Table 1 (Cont'd)
RPV EXAMINATION COVERAGE Weld Description Exam Percent of Figure and Wald No. Angle Volume Examined No.
RPV Circumferential Shell Welds:
RPV1-101-141 0* 47.22 1 45' 94.42 1 45' Vee 100.00 1 60* 79.69 1 45'T 73.87 1 60*T 65.25 1 RPVl-101-171 0' 84.23 1&2&3 45* 100.00 1&2&3 45' Vee 100.00 1&2&3 60* 100.00 1&2&3 45'T 100.00 1&2&3 60*T 100.00 1&2&3 50/70* 100.00 1&2&3 50/70 *T 100.00 1&2&3 RPVl-103-121 0* 99.44 2&3 45* 100.00 2&3 45' Vee 100.00 2&3 60* 100.00 2&3 4 5 'T 100.00 2&3 60 *T 100.00 2&3 RPV1-101-121 0* 92.67 2&3 45' 99.27 2&3 45' Vee 96.27 2&3 60* 93.68 2&3 45'T 100.00 2&3 60*T 100.00 2&3 1.5*,9*, & 5* 100.00 NA J-5
ATTACHMENT J ST ML9 AE PAGE 0F ID'I)t Table 1 (Cont'd)
RPV EXAMINATION COVERAGE Wald Description Exam Percent of Figure and Wald No. Angle Volume Examined No.
RPV Longitudinal Shell Welds:
RPV1-101-142A 0* 89.38 1 45* 100.00 1 45' Vee 100.00 1 60* 100.00 1 45'T 100.00 1 60*T 100.00 1 50/70* 100.00 1 50/70*T 100.00 1 RPVl-101-142B O' 89.38 1 45' 100.00 1 45' Vee 100.00 1 60* 100.00 1 45'T 100.00 1 60*T 100.00 1 50/70* 100.00 1 -
50/70*T 100.00 1 RPV1-101-142C O' 89.38 1 45* 100.00 1 45' Vee 100.00 1 60* 100.00 1 45'T 100.00 1 60*T 100.00 1 50/70* 100.00 1 50/70 *T 100.00 1 RPV1-101-124A 0' 89.38 2 45* 100.00 2 45' Vee 100.00 2 60* 100.00 2 45'T 100.00 2 60*T 100.00 2 50/70* 100.00 2 50/70 *T 100.00 2 J-6
ATTACHMENT 3 ST HL AE-/837 PAGE /0 0Fl8 Table 1 (Cont'd)
RPV EXAMINATION COVERAGE Weld Description Exam Percent of Figure and Weld No. Angle Volume Examined No.
RPV Longitudinal Shell Welds (Cont'd):
RPV1-101-124B O' 89.38 2 45* 100.00 2 45' Vee 100.00 2 60* 100.00 2 45*T 100.00 2 60*T 100.00 2 50/70* 100.00 2 50/70*T 100.00 2 RPVl-101-124C O' 89.38 2 45* 100.00 2 45' Vee 100.00 2 60* 100.00 2 45'T 100.00 2 60*T 100.00 2 50/70* 100.00 2 50/70 *T 100.00 2 RPV1-101-122A 0* 91.30 2 45' 87.63 2 45* Vee 36.64 2 60* 75.18 2 45*T 92.66 2 60*T 87.19 2 RPV1-101-122B O' 74.46 2 45* 82.93 2 45' Vee 82.93 2 60* 96.95 2 45'T 100.00 2 60*T 99.16 2 RPVL-101-122C O' 81.88 2 45* 100.00 2 45' Vee 100.00 2 60* 98.69 2 45'T 100.00 2 60*T 100.00 2 J-7
t.
ATTACHMENT .'>
ST HL-AE If39 PAGE // OF/g Table 1 (Cont'd)
RPV EXAMINATION COVERAGE Weld Description Exam Percent of Figure and Wald No. Angle Volume Examined No.
Nozzle-to-Shell Welds:
Inlet Nozzles (Weld) 0* (Shell) 53.55 4 45' 96.82 4 6* (Bore) 64.64 4 45*T 53.55 4 60*T 53.55 4 Outlet Nozzles (Weld) 0* (Shell) 52.21 5 45' 94.80 5 0* (Bore) 96.77 5 45*T 52.21 5 60*T 52.21 5 Closure Head Welds:
RPVl-101-101 0* 89.41 6 45' 93.09 6 60* 96.33 6 45*T 89.41 6 60*T 89.41 6 RPVl-103-101 0* 91.98 6 45' 96.77 6 60* 98.77 6 45*T 99.44 6 l 60*T 99./4 6 l
l l
1 I
c J-8 i
O' 45' 90' 13 5' 180* 225~ 2 70' 3tS' 34 8 i . . . i i i i i
' %H P V-tol-1 7/
I I (O o l 3 u I
U I l t > 4 I
h:Q CORT BARPEL SUPPORT LUG,5 (6)EA.
B S
'S I
k k L T N Y
Qa pMUa RPV-10/-/54A
_gd;ra RPV./O(-141
- -h
- L - ApV-/Of-LS4C rM A l
A- .k ppy-pf-jf4 p dljl RPV-10/-IS4B / .,
Nff Y bW// /// 777h//77f /bWf' s.'!* "
RPV-/02-fS/ -
RPV LOWER ,$HEL.L ANO LOWER HEA D -SURF 4cf AREA NOTSC4NNED A P-e El$9 h>$ e Figure 1 n
%gS,a
- D5
4 i
V W59em24 5m-l's m ~vOM4
- 0 6I 3
8 D
- C 2
2 E
H H
'51 I H 0
A C
3 H S V
I T
O
- R L
I E
A A
0 R 7
2 I A.
2 c
A
- o$s a' F
R 4
t S
'5 1 -
2I 2
2
/
/
8 1 O 2 1 7 i,
Z2 8
- /
/ I -
V P u H-3 /
0 1
1 0 0
/ 1
/
I
- / - V V/ V 2
'0 % PP P 8I 1
RA R e r
- u g
r, i F
,.S l
N
'5 3I 1
y sk%
- A 2
'0 9I 2
1
/-
M-I
_ V P
A 5 1 4
'O 1 mS % hk 40 8
+
9 5
%wo B
%5sWw
% )
A)
E R E A C A
D F T R E
U A S.
G F R O A E
ED (N 3N l
S l O I
N O uD I
T I
AL D (O A T I
TE NI
/
I 1W O I
A
/ I M L C T I
L I
E /R A/T '0 .
3 e
CC I
1 6 r A u I
F h
/ y g i
R LA L s
i F
I U
I S/ C *O s I P - -
RY g I
AT I
E g I
N
>~
YC
- > l
ATTACHMENT 3 ST HL-AE /D PAGE /f0F/
\
h ;,
2%
t k %
i o s EN k o l s N l k
R 3
E{N 3
N O
.N D f
$ % c
.N N
'D D
i e
i
.\%W i N /
l e '
~
/
l ,
--- ,I pr ,
i l -
/- .!! o
/ ll E
- l 3
, :s i
, - '1-
/ p' *Y l / ,
/ i .
/ .
- ,1
(
e t
/ ;-3[;e, I ' ' '
, j .
i i /i i r i / ' //
t , /, IJi
. r, "
i I #/
//
)
l f.
//
sf
//
'/,/
J-12
c
' ATTACHME T 'b ST-HL- AE-PAGE //, OF I
/
w k y o
s N A A kTLs s
=
N k
t, ." %
7 o N I I k
' I l Q l
/
s I
y .
p
,/ 2
- a
[ e* M s' /
4
/
/
! / l
/ ! , .
L g'
\ I 4
\. ,
_j =s 9 :
Q , g-s y-
\..
\,,, -s d s J-13
, -i 1 J
w n' W WELb I-/03-/0/ - ~'
Nh
_ sN
.J. \ '
N ,
s.
/
l/ ~
/fl~
. WEL D /- /01-10/ -
I
@ ~ 45'l//11T4T/ON
- ' h
'&xx & - 60*L/A1/TA TION
@ - 45'(60*L /All 7~A TION Q - O'l/MITA TION 4
/ RP V Cl OSUR E HEAD 3
1
- ~ -
$M ,
El$s s
- me2 om h
Figure b '
i 1
ATTACHMENT 3 ST HL AE-tf37 ATTACHMENT PAGE If OF /3 RR-ENG-04-02 SOUTH TEIAS PROJECT ELECTRIC SENERATING STATION, UNIT 1 ASME SECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: RPV CLOSURE HEAD BOLTING (CLASS !)
!- LINE NO./ SUBASSEMBLY : : : : :
CLASS l- NELD IDENTIFICATION l l 1 C0VERA6F : : :
ICATE60RY :- NELD ID FI6URE l 1 ---
l :
!! TEM NO. ! EIAM l !! DIR: 2 :: EFF.!: : IFABRICATION lEI. ROMT l- EIARINATICM METHOD l TYPE :NONE 10NLY : Dia ll COV. : TOTAL l LIMITATION l NDE :
t r= = = = == = = = = = = = = = = == = = = = == = = == u s = = = = = = = n ::::::::::: := = = n u = = = = = == = = = = == = = = == = = = == = = == == == == =n = = == = == = = = == = = = == = = = l
!! CLOSURE NUTS lI 9 ll 91 :: ! LIMITED UT FROM THE OR SURFACE DUE : UT/MT !
lB-6-1 : lA-31A,34A-37A, 145 : 0 18 : 82 :: 91 ll iTO SPANNER NRENCH SLOTS. :
lB6.10 328,33B,38SB : : l ll ll IUT PERFORMED AS A SUPPLEMENTAL : :
SURF : : l l :: ll 91 lEIAMINATION OF THE THREADED A3EA. :
- : FIGURE NO. A-RPV-2 l ----- l ---l ---- ! ----l l :: lMT PERFORMED ON ALL SURFACES EICEPT :
- : : : ! :: :: THE THREADED PORTION DUE TO MT YDKE : :
- UT/MT lMT ! 8 -
l - !! - :: 100 ! ACCESS. :
l l l l l
!! CLOSURE STUDS l45/68 l 8l 11 ! 89 :: 95 :: lEIAMihATION VOLUME IN ACCORDANCE : UT/MT :
!B-6-1 : lA-38A : : : !! :: lNITH CODE CASE N-387-1. : l lB6.38 : : : : l !! ll- l LIMITED UT OF THE ROTO-LOK LUGS DUE : :
VOL/ SURF : : : l ll :: 95 lTO CONFIGURATION OF THE LU6S. !
! FI6URE NO. A-RPV-2 l-------- l---: : ll l l !
! ! ! : : : :: :: : : l l l UT/MT/PT iMT/PT 8 - ll l 100 l l l l
y 1
' ATTACHMENT '/
ST HL- AE- I W1
_PAGE I OF 5a HOUSTON LIGHTING AND POWER COMPANY SOUTH TEXAS ELECTRIC CENERATING STATION UNITS 1 AND 2 DOCKET NOS. STN 50-498, STN 50-499 REQUEST FOR RELlEF FROM ASME BOILER AND PRESSURE VESSEL CODE, SECTION XI REQUIREMENTS RELIEF REQUEST NO. RR-ENG-05 Reference Code: ASME Boiler and Pressure Vessel Code,Section XI, 1980, Edition through Winter 1981 Addenda I. Components for Which Exemption is Requested:
(a) Name and Identification Number: As described in Attachment RR-ENG-05-01.
(b) Function: See applicable sections of the STPEGS FSAR.
(c) Class: ASME Class 1 or Class 2 as specified in Attachment RR-ENG-05-01.
(d) Number of Components: Various pressure retaining welds as described in Attachment RR-ENG-05-01.
(e) Fabrication NDE: See Attachment RR-ENG-05-01.
II. NDE Requirement for Which Relief is Requested:
Relief from full ultrasonic or surface (PT/MT) examination coverage of the welds described in Attachment RR-ENG-05-01.
III. Basis for Relief Request:
Attachment RR-ENG-05-01 lists specific welds in Class 1 and Class 2, components and piping systems whose PSI ultrasonic and/or surface (l'T/MT) examination coverage was limited by component geometry or configuration. The attachment provides the percentage of Code-required coverage for each examination method and describes the component geometry or configuration that limits the coverage for each weld.~ These welds were examined to the maximum extent practical within the limits of component configuration and geometry and the limitations of the examination equipment and techniques utilized for the PSI program. We believe the extent of examination coverage obtained for each of the welds listed in Attachment RR-ENG-05-01 constitutes an acceptable level of coverage which is consistent with the intent of ASME Section XI.
P2/ENG-05.kd
I ATTACHMENT 1 ST.HL-AE-uPAGE a_ o/
2 IV. Alternative Examinations:
No alternative examinations are proposed for the welds for which relief is requested.
V. Applicability and/or Schedule:
Relief from ASME Section XI PSI examination coverage requirements is hereby requested for the STPEGS-1 component and piping welds described in Attachment RR-ENG-05-01.
s Attachment P2/ENG-05.kd
ATTACHMENT 4 ATTACHMENT ST HL AE /139 PAGE 3 OF &)
RR-ENG-05-01 SOUTH TEXAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 ASME SECTION XI CODE COVERAGE LIMITATIONS PAGE TABLE OF CONTENTS NUMBER REVISION PAGE 11 CLASS 1 COMPONENTS PRESSURIZER 4 STEAM GENERATORS (PRIMARY SIDE) 7 MAIN REACTOR COOLANT LOOPS 11 REACTOR COOLANT PIPING 21 RESIDUAL HEAT REMOVAL PIPING 23 SAFETY INJECTION PIPING 24 CLASS 2 COMPONENTS STEAM GENERATORS (SECONDARY SIDE) 26 REGENERATIVE HEAT EXCHANGER 30 RESIDUAL HEAT REMOVAL HEAT EXCHANGERS (PRIMARY SIDE) 31 EXCESS LETDOWN HEAT EXCHANGER (PRIMARY SIDE) 34 REACTOR COOLANT FILTERS 35 FEEDWATER PIPING SYSTEM - PIPE LUGS 35A MAIN STEAM PIPING 36 MAIN STEAM PIPING - PIPE LUGS 39A RESIDUAL HEAT REMOVAL PIPING 40 SAFETY INJECTION PIPING 41 PAGE i
i
. ATTACHMENT '/
ST HL AE f f37 PAGE 4 OF 50 REVISION 2 SOUTH TEXAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 ASME SECTION XI CODE COVERAGE LIMITATIONS REVISION PAGE
======
REVISION 1 PAGE NUMBER AFFECTED CHANGE 35A ADD 35B ADD 39 REPLACE 39A ADD 39B ADD 40 REPLACE 41 REPLACE 42 ADD REVISION 2 PAGE NUMBER AFFECTED CHANGE 35A -
REPLACE 35B REPLACE 39A REPLACE 39B REPLACE i
i
(
PAGE 11 l
- ATTACHMENT 4 ST-HL-AE 18 PAGE 5 OF l
SOUTH TEXAS PROJECT ELECTRIC GENERATING STATION, UNIT 1
SUMMARY
OF PRESERVICE EXAMINATION LIMITATIONS THE FOLLOWING TABLES PROVIDE DETAILS ON THE LIMITATIONS WHICH WERE ENCOUNTERED DURING THE PRESERVICE EXAMINATIONS (PSI) AT THE SOUTH TEXAS PROJECT ELECTRIC GENERATING STATION (STP), UNIT 1.
, THE AREAS ARE LISTED IN A TABLE FOR THAT PARTICULAR VESSEL OR PIPING SYSTEM AND ARE ARRANGED IN THE SAME ORDER AS THE SWRI PSI PLAN. EACH TABLE OF THIS
SUMMARY
PROVIDES THE FOLLOWING INFORMATION AS DESCRIBED:
COLUMN 1 - CLASS / CATEGORY / ITEM NO./ EXAMINATION REQUIREMENT IDENTIFIES THE ASME SECTION XI CODE CLASS, CATEGORY, ITEM NUMBER AND EXAMINATION REQUIREMENT (VOLUMETRIC OR SURFACE) FOR THE SPECIFIC EXAMINATION AREA LISTED IN COLUMN 2. THIS INFORMATION IS DERIVED FROM TABLES IWB-2500-1 AND IWC-2500-1 OF THE 1980 EDITION OF ASME SECTION XI (WITH ADDENDA THROUGH WINTER 1981).
COLUMN 2 - LINE NO./ SUBASSEMBLY WELD IDENTIFICATION WELD ID FIGURE WELD CONFIGURATION EXAMINATION METHOD PROVIDES INFORMATION FOR EACH EXAMINATION AREA BY LINE i NUMBER (PIPING) OR SUBASSEMBLY NUMBER (VESSEL), UNIQUE WELD IDENTIFICATION NUMBER, SWRI WELD ID FIGURE REFERENCE, WELD CONFIGURATION (PIPE-TO-TEE, HEAD-TO-SHELL, etc.), AND EXAMINATION METHOD (UT, UT/PT, OR UT/MT).
COLUMN 3 - EXAM TYPE l
j LISTS THE METHODS OF EXAMINATIONS USED FOR EACH AREA BY
, SPECIFIC ANGLES FOR UT (0, 45, 45T, 60, 60T) AND SURFACE
! TECHNIQUE (MT OR PT) IF REQUIRED.
( COLUMN 4 - % COVERAGE l
- THE EXTENT OF COVERAGE FOR EACH EXAM TYPE IS EXPRESSED IN PERCENTAGES BASED ON THE EXAMINATION VOLUME / AREA REQUIRED IN SECTION XI. DEPENDING ON METHOD, THE PERCENTAGE COVERAGE MAY BE REPRESENTED IN MORE THAN ONE WAY. ,
i i SURFACE METHODS ARE THE SIMPLEST AND ARE EXPRESSED AS A l PERCENTAGE OF THE REQUIRED SURFACE AREA RECEIVING NO COVERAGE AND THE REMAINING BALANCE FROM 100% AS THE TOTAL COVERAGE.
i
ATTACHMENT ST HL-AE-163')4 PAGE 6 OF5o PAGE 2 ULTRASONIC COVERAGE IS FIRST EXPRESSED FOR EACH EXAM TYPE AS A PERCENTAGE OF THE VOLUME RECEIVING NO COVERAGE, ANGLE BEAM COVERAGE IN 1 DIRECTION ONLY, AND ANGLE BEAM COVERAGE IN 2 DIRECTIONS. THESE PERCENTAGES ARE THEN USED TO COMPUTE THE EFFECTIVE COVERAGE FOR THAT EXAM TYPE. IN THE CASE OF 0 DEGREE, THE EFFECTIVE COVERAGE IS EQUAL TO THE BALANCE OF 100% MINUS THE PERCENTAGE RECEIVING NO COVERAGE. THE EFFECTIVE COVERAGE FOR ANGLE BEAM IS CALCULATED FROM THE FOLLOWING FORMULA:
A + 2*B C= (EFFECTIVE COVERAGE FORMULA, ANGLE BEAM) 2 WHERE A = 1 DIRECTION ONLY PERCENTAGE B = 2 DIRECTION PERCENTAGE EXAMPLES:
(1) NONE 1 DIR 2 DIR 0% 0% 100%
0 + 2*100 C= = 100% EFFECTIVE COVERAGE 2
(2) NONE 1 DIR 2 DIR 0% 100% 0%
100 + 2*0 C= = 50% EFFECTIVE COVERAGE (3) NONE 1 DIR 2 DIR 50% 50% 0%
50 + 2*0 C= -
= 25% EFFECTIVE COVERAGE 2
THE TOTAL UT COVERAGE IS THEN EXPRESSED AS THE AVERAGE OF THE EFFECTIVE COVERAGE PERCENTAGES FOR EACH UT EXAM TYPE. EACH UT EXAM TYPE IS CONSIDERED AS EDUAL WEIGHT IN THE CALCULATION OF THE AVERAGE.
THIS METHOD FOR REPORTING UT COVERAGE AS A SINGLE PERCENTAGE FOR ALL UT EXAM TYPES WAS THE PREFERRED METHOD BY HL&P FOR IDENTIFYING UT EXAMINATION AREA LIMITATIONS.
6 ATTACHMENT y ST HL AE 1837 PAGE 7 0F So PAGE 3 COLUMN 5 - LIMITATION A DESCRIPTION OF THE TYPE OF LIMITATION AND PRIMARY REASON FOR WHY THE COVERAGE WAS LIMITED IS PROVIDED IN THIS COLUMN.
COLUMN 6 - FABRICATION NDE THIS COLUMN DESCRIBES THE FABRICATION / CONSTRUCTION NDE THAT WAS PERFORMED TO SATISFY THE ASME SECTION III REQUIREMENTS FOR THAT COMPONENT.
ATTACHMENT 4 ST-HL AE- 1839 PAGE f OFSo SOUTH TEXAS PROJECT ELECTRIC 6ENERATING.STATICN, UNIT 1 PAGE 4 ASME SECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: PRESSURIZER (CLASS 1)
! - LINE NO./ SUBASSEMBLY l l l l l l CLASS l- NELD IDENTIFICATION : : I COVERA 6E : -l
- CATEGORY :- NELD ID FIGURE : : : : l
!! TEM NO. l- NELD CONFIGURATION : EIAM i !! DIR: 2 ll EFF.: !~ ! FABRICATION :
IEX. REQMT - EIAMINATION METHOD : TYPE INCNE 10NLY l DIR ll COV.ll TOTAL l LIMITATION NDE l ks. 33======================================================================================================================t
- 1 : PRl-1 l8 l 18 l - l - :: 98 :: l LIMITED UT FROM THE SHELL SIDE DUE : RT/PT l
!B-B : C1 l45 : 2! 11 87 :: 93 !! TO PROIIMITY OF PERMANENT PIPE :
192.11 : FIGURE NO. A-PRl-1 I45T : 4: 9: 87 ll 92 : l SUPPORTS AND 3/4' INSTRUMENTATION : :
VOL ! !68 l 2 14 84 ll 91 ll l LINES. ! !
! HEAD-TO-SHELL l68T l 3 18 l 87 :: 92 :: l l l l l ! ! ! l !! ll-------! : :
- : UT l l l l :: ll 91 : : :
!! ! PRl-1 l0 8: - l - :: 100 !! l LIMITED UT45 AND UT68 FROM SHELL C l RT/PT
-lB-B C4 145 : 8 2 98 ll 99 ll lDUE TO PR0llMITY OF TRUNNION. !
- -- l FI6URE NO A-PRl-1 l45T l 8 8 l 188 :: 188 :: l LIMITED UT45 AND UT68 FROM SHELL D :
Y0L 168 8 4l 96 :: 98 : lDUE TO PR0llMITY OF WELDED LUSS. l l l l SHELL-T0-SHELL 68T l 8 8 l 188 ll 188 ll lNO EIAMINATION REQUIRED BY INSERVICE: :
- : : : l l !! !! - PROGRAM. l l l l UT l l l l ll ll 99 l l l l- :- :
l1 : PRZ-1 10 8l - l - :: 188 :: l LIMITED UT45 AhD UT68 FROM THE HEAD l RT/PT l lB-B : C7 145 : 8l 24 : 76 !! 88 :: l SIDE DUE TO PROIIMITY OF SUPPORT : :
lB2.11 : FIGURE N0. A-PRl-1 45T l 8: 8 188 ll 188 ll l SKIRT NELD. LIMITED UT45 AND UT68 :
IV0L 168 l 3: 58 : 47 ll 72 :: IFROM THE SHELL SIDE DUE TO PROIIMITY: :
- SHELL-TO-HEAD 16BT l 8l 8 l 188 :: 100 !! !DF NELDED PADS AND 3/4' INSTRUMENTA-l l l l l l l l :: l:' ! TION LINES. l 1 l UT ! ! ll :: 92 : : !
l- -; .- : .
11 : PRl-1 l8 : 14 ll 86 :: l LIMITED UT ON BOTH SIDES DUE TO : RTiPT :
lB-B ! Li l45 : 14 : 8 86 :: 86 :: lPRDIIMITY OF PERMANENT INSULATION : l lB2.12 : FIGURE NO. A-PRZ-1 l45T ! 14 : 8l 86 :: 86 :: ISUFPORT RING. NO LIMITATIDL FOR l l lVOL l l68 14 : 8 86 ll 86 !! l INSERVICE EXAMINAT10N SINCE SUPPORT l l l LON61TUDINAL l68T l 14 l 8 86 :: 86 :: l RING IS OUTSIDE THE 1 FT EIAM AREA l l
- : l l ll ll -l5EQUIRED BY INSERVICE PROGRAM. I !
l l UT : : : : :: ll 86 : : :
l- - :- -!
l1 : PRZ-1 l8 l 2l - l -
ll 98 :: l LIMITED UT FROM VESSEL SIDE DUE TO l RT/PT l lB-D l N4C l45 1 2l 97 :: 98 :: :PRDIIMITY 0F 1-INCH LINE ABOVE THE :
IB3.118 : FIGURE 10. A-PRZ-1 145T 1l 8: 99 ll 99 ll lEIAM AREA. l l IV0L l68 8 2 98 : 99 :: l l l N0llLE-TO-VESSEL :68T : 0! 8 l 188 ll 188 :: : l l l l l l l l :: :l------- : !
! l UT l l : :: : 97 : : :
" ATTACHMENT 4 ST-HL-AE It39 PAGE 9 OFSA SOUTH TEIAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 PAGE 5 ASME SECTION Il CODE COVERA 6E LIMITATIONS SYSTEM: PRESSURilER (CLASS 1)
! - LINE NO./ SUBASSEMBLY : : l l l CLASS i- NELD IDENTIFICATION : I COVERAGE : l l CATEGORY l- WELD ID FIGURE : : : : :
IITEM NO. :- NELD CONFIGURATION l EIAM i l1 DIR: 2 : EFF.!! l l FABRICATION :
lEX. REGMTl- EIAMINATION METHOD : TYPE lNONE l0NLY : DIR ll COV. TOTAL : LIMITATION l NDE l
!====================================================================------ =================================================:
!! l PRI-1 l8 l 6l - l - ll 108 :: lLIMITEDUT45FROMTHESAFEENDSIDE: RT/PT IB-F : N1-SE !45 : 8 21 : 79 ll 90 ll lDUE TO PR011MITY OF PERMANENT l l lB5.48 : FIGURE N0. A-PRZ-1 145T : 9 0 l 188 ll 100 :: llNSULAT10N SUPPORT LUGS. LIMITED : :
VOL/ SURF : l l l ll ll 97 lUT45 FRCM THE N0ZILE SIDE DUE TO :
- I h0llLE-TO-SAFE EhD :- -:
-ll- ll !N0ZlLE CONFIGURATION. i :
- : : : l ll :: : l l l l UT/PT lPT 8 -
- ll - ll 100 l l l l- -- l l l- l l1 : PRZ-1 l0 : 8: - l - ll 100 ll l LIMITED UT45 FROM THE N0ZZLE SIDE : RT/PT lB-F : N2-SE l45 : 8: 33 l 67 :: 84 :: lDUE TO N0ZZLE CONF 16UPAT!0N. l l lB5.48 : FIGUPE h0. A-PRI-1 l45T : 0l 8l100!!III:: -
-lVOL/ SURF : : : : : :: : 95 : :
.: ! SAFE END-TO-N0lllE l l
- it-----:: -
- : : l l l ll ll : :
- : UT/PT PT l 8l - ! - ll - : 100 l l l l- :- .- .
-l- -
l1 l PRZ-1 l0 0l - l - :: 100 !! l LIMITED UT45 FROM THE N0ZILE SIDE : RT/PT !
l3-F ! N3-SE 145 : 0l 3: 97 ll 99 ll lDUE TO N0ZlLE CONFIGURATION. ! !
!B5.48 : FIGURE NO. A-PRZ-1 145T l 8l 0 188 ll 184 ll l l l IV0L/ SURF : : l l l ll !! 99.5 : l l l N0llLE-TO-SAFE END ; -l l l -l l-- - l l l l : l ll ll . l l l UT/PT PT 9: - l - ll - ll 188 l l l- -:- -
l l= -:
- 1 : PRZ-1 l9 l 9 - ; - : 100 ll l LIMITED UT45 FROM THE N0llLE SIDE l RT/PT l lB-F : N4A-SE 145 l 0 36 l 64 :: 82 :: lDUE TO N0ZlLE CONFIGURATION. !
lB5.44 : FIGURE N0. A-PRZ-1 l45T l 0: 0 l 108 :: 100 ll- l l l lVOLISURF : : l l l ll 94 l l l : N0llLE-TO-SAFE END -l l-----l ll-----il- l l l l l l l ll :l l ! !
UT/PT lPT 0l - ! - l - ll 134 l ! l
- = :- .. -;.... t- -
it l PRZ-1 !a l 0l - l - ll 108 ll l LIMITED UT45 FROM THE N0ZILE SIDE : RT/PT l IB-F : N48-SE 145 : 8l 12 ! 88 ll 94 ll :DUE TO N0ZZLE CONFIGURATION. l l 1B5.48 : FIGURE NO. A-FRZ-1 !45T 9: 0 l 198 !! IBO !l- ! : l lVOL/ SURF : : l l ll 'l 98 : : :
- : N0ZZLE-TO-St.FE END : -!-----l-----l -:: ll -! ! !
l l l l ! l ll ll l l l l UT/PT lPT l 0l - l - ll - :: 180 l l l
ATTACHMENT 4 ST HL AE 1431 PAGE lo 0F 50 SOUTH TEIAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 PAGE 6 ASME SECTION XI CODE COVERASE LIMITATIONS SYSTEM: PRESSURIZER l CLASS 1) l l- LINE N0./ SUBASSEMBLY l l l l l l CLASS - NELD IDENTIFICATION : I COVERA 6E :
CATEGORY l- NELD ID FIGURE l : -l l l ITEM NO. l- WELD CONFIGURATION l EIAM l !! DIR: 2 :: EFF.ll l IFABRICAil04 EI. REQMT!- EIAMINATION METHOD : TYPE lNONE l0NLY l DIR ll COV.l: TOTAL l LIMITATION : NDE :
l3:23 =======================================================================================================================:
lI l PRZ-1 l8 : 8l - l - ll 190 :: l LIMITED UT45 FROM THE N0ZZLE SIDE l RT/PT l lB-F : N4C-SE l45 8 26 : 74 ll 87 :: DUE TO N0ZZLE CONFI6URATION. l !
lB5.48 : FIGURE NO. A-PRZ-1 l45T : 0l 8 l 100 !! 100 ll lVOL/ SURF : : l l ll !! 96 : : :
- : N0ZZLE-TO-SAFE END ------l-----! -l ll- -:: -
- l l l l l l l ll ll l l l l l UT/PT lPT l 0l - l - ll - ll Ile : : :
. .. - . .- -g...- ._
!! PRZ-1 lPT l 7l - l -
ll - ll 93 lNO MT ON TOP OF THE BRACKETS DUE : MT l 19-H llA,lB 2A,2B,34.38,4A,4B: l l l ll :l lTO PRDIIMITY OF PERMANENT SUPPORT l !
lB8.20 : FIGUFiE h0. A-PRZ-1 l l l l ll ll l FRAME. l l l SURF l l l l ! ll ll l(8 SUPPORT BRACKETS) !
! SUFFORT BRACKETS l l l :: ll l l l l l l l l !! ll l l l l l MT l l ! l ll ll l l !
e - +- E-
ATTACHMENT 4 ST.H L-A E-i f39 PAGE/I OF5D SOUTH TEXAS PROJECT ELECTRIC GENERATING STAT!0N, UNIT 1 PAGE 7 ASME SECTION II CODE COVERAGE LIMITATIONS SYSTEM: STEAM SENERATOR - 1A (CLASS 1 - PRIMARY SIDE) l l- LINE NO./ SUBASSEMBLY : : : :
l CLASS l- WELD IDENTIFICATION : l 1 COVERA 6E : : :
- CATEGORY l- WELD ID FIGURE :
!! TEM NO. l- WELD CONFIGURATION ; Elli !! DIR: 2 :: EFF. l l lFABRICATICN :
lEX. RQMT l- EIAMINATION METHOD l TYPE lNONE l0NLY : DIR ll COV. l TOTAL l LIMITATION NDE :
- =============================================================-----::================- =======================
it SG-1A la 34 l - l - : 66 !! lNO UT FROM THE SUPPORT RING SIDE DUE: RT/MT l
!B-B l SR-1 l45 l 6 94 : O :: 47 :: TO SUPPORT RING CONFIGURATION. :
182.31 : FIGURE NO. A-SG-1 l45T l 34 8 66 :: 66 !! l LIMITED UT45 AND UT68 FROM THE HEAD : l lVOL 168 l 12 : 88 8 ll 44 .: l SIDE DUE TO PR0!!MITY OF INLET AND l l
! HEAD-TO-SUPPORT RING l64T : 34 l 0! 66 ll 66 :: l00TLET N0ZZLE WELDS. ! !
- : : : : : :: ll-------l l l l l UT l l l ll ll 58 l l l it ! SG-1A l8 : 32 l -
l -
ll 68 :: l LIMITED UT45 AND UT68 FROM THE TUBE : RT/MT l lB-B l SR-2 l45 : B l 188 l 8 :: 58 :: l PLATE SIDE DUE TO PROXIMITY OF l lB2.48 l FIGURE NO. A-SG-1 l45T : 32 1 0l 68 !! 68 :l l WELDED PLATES. NO UT FROM THE : l lVOL ! 168 ! !! 99 l 8 ll 58 ll l SUPPORT RING SIDE DUE TO SUFPORT l l l !SUPPT RING-TO-TUBE PLT l68T l 32 : I: 68 ll 68 !! l RING CONFIGURATION. :
l l l l l !! l l ------ l l l l l UT : : : l! 61 : :
l- -- l - -
l l- l l1 : SG-1A l0 l 8l -
l - ll 198 ll lLIMITE0 UT45 AND UT68 FROM THE HEAD RT/MT :
!B-D IN l45 l 5l 95 : 0 :: 48 :: : SIDE DUE TO PROXIMITY OF WELD SR-1.
lB3.138 l FIGURE NO. A-56-1 l45T l 9 9: 100 ll 108 ll : :
VOL l68 l 11 89 l 8 ll 45 ll l l l l l N0ZZLE-TO-HEAD l68T l 9: 8 l 100 :: 188 :: l l l l l l l 1 l ll !! l l
! ! UT l l l ll ll 78 l l l- l . .
--a
!! SG-!A l0 9l - l - !! 118 : l LIMITED UT45 AND UT68 FROM THE HEAD : RT/MT !
lB-D l CN l45 l 4l 96 l 0 :: 48 :: l SIDE DUE TO PRDIIMITY OF WELD SR-1. l l 1B3.130 : FIGURE NO. A-56-1 l45T l 9l 8 l 180 ll 198 ll l l l l IV0L l l68 18 l 99 8 :: 45 ll l l l l l l HEAD-TI-N0ZILE l68T : 8l 8: 100 ll 188 ll l l l l ! ! l l l ll ll -l l l l l UT l l ll !! 79 l l l l
i l
ATTACHMENT 4 ST-HL-AE- /A37 PAGE /A0F50 SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 8
.ASME SECTION 11 COLE COVERABE Llh ' 710NS SYSTEM: STEAM GENERATOR - 1B lLLA5S 1 - PRIMARY SIDE)
- LINE N0./ SUBASSEMBLY : : : l l CLASS l- HELD IDENTIFICATION : I COVERAGE : : :
l CATEGORY - WELD ID FIGURE : l----- !
!! TEM NO. l- NELD CONFIGURATION : EIAM il DIR: 2 :: EFF. l l ! FABRICATION lEI. RQMT l- EIAMINATION METHOD : TYPE lNONE l0NLY l DIR :: COV.!: TOTAL LIMITATION : NDE :
- ============================.=========================================================================================l l1 l SG-1B l8 34 : - l - !! 66 ll lNO UT FROM THE SUPPORT RING SIDE DUE! RT/MT l lB-B l SR-1 145 l 1l 99 l 0 !! 58 ll lTO SUPPORT RIN6 CONFIGURATION. :
lB2.31 : FIGURE NO. A-56-2 145T : 34 9: 66 ll 66 :: l LIMITED UT45 AND UT60 FROM THE HEAD : :
lVOL 60 4: 96 : I ll 48 ll l SIDE DUE TO PROIIMITY OF INLET AND l l l l HEAD-TO-SUPPORT RIN6' l60T l 34 : 8 66 !! 66 ll l0UTLET N0lILE NELDS. l l l l : l l l ll ll -
- UT : : : l ll ll 59 :
l-- l -
-l ~
l1 l SG-1B l0 l 33 l - - 1: 67 ll l LIMITED UT45 AND UT60 FROM THE TUBE : RT/MT IB-B SR-2 145 8: 100 : O ll 58 ll l PLATE SIDE DUE TO PROI!MITY OF l l lB2.48 : FIGURE NO. A-SG-2 l45T l 33 : 8l 67 :: 67 :: lNELDED PLATES. NO UT FROM THE l l IV0L l68 2 98 9 ll 49 !! l SUPPORT RING SIDE DUE TO SUPPORT ! !
l lSUPPT RING-T0-TUBE PLT l61T l 33 : 8: 67 :: 67 :: ! RING CONFIGURATION. l !
! : : l ll :: : : :
l l UT l l l : ll 60 : ! !
- - -; g- -;_ -
!! ! SG-1B 18 l 9l - l - ll 189 ll ! LIMITED UT45 AND UT60 FROM THE HEAD : RT/MT l lB-D l IN 145 l 4 96 l 9 ll 48 ll iSIDE DUE TO PR0llMITY OF HELD SR-1. l l 183.138 : FIGURE NO. A-56-2 145T l 8: 9 l 199 :: 100 :: : i lVOL 60 : 10 l 98 : 8 ll 45 :: : : :
l l N0ZZLE-TO-HEAD 6BT 0l 0 100 ll 108 :: : !
- UT l l l l :: :: 79 l :
- =_= _;
l1 : SG-1B l0 9l - l - ll 108 :: l LIMITED UT45 AND UT60 FROM THE HEAD ! RT/MT l
!B-D DN l45 : 4 96 : 8 :: 48 :: l SIDE DUE TO PRDIIMITY OF NELD SR-1. l l lB3.138 : FIGURE NO. A-SG-2 145T 0l 8 l 180 :: 100 :: : : :
lVOL : l68 : 18 98 l 9 :: 45 :: l l l l l HEAD-TO-N0ZZLE l68T l 9 8 100 :: 100 ll l l l l UT : l l ll ll 79 l l :
l l
l l
ATTACHMENT 4 ST-HL-AE /339 PAGE 13 OF 50 SOUTH TilAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 9 ASME SECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: STEAM 6ENERATOR - lC (CLASS 1 - PRIMARY SIDE) l l- LINE NO./ SUBASSEMBLY : l .! l l CLASS l- NELD IDENTIFICATION l l 1 COVERAGE : l l l CATEGORY - NELD ID FIGURE : l l : l
!! TEM NO. l- NELD CONFI6URATION l EIAM : l1 DIR: 2 ll EFF. l FABRICATION :
lEX. RQMT l- EIAMINATION METHOD l TYPE lNONE l0NLY : DIR :: COV.ll TOTAL l LIMITATION : NDE l
- ===============================================:::::::=======================================
l1 l SG-!C l0 l 34 l - l - ll 66 ll lNO UT FROM THE SUFPORT RING SIDE DUE: RT/MT l lB-B l SR-1 l45 5l 95 8 :: 48 :: lTO SUPPORT RING CONFI6URATION. l l 182.31 l FIGURE N0. A-56-1 l45T l 34 l 8 66 ll 66 :: l LIMITED UT45 AND UT61 FROM THE HEAD !
VOL : l68 l !! 89 l 0 :: 45 !! l SIDE DUE TO PROIIMITY OF INLET AND : :
- HEAD-TO-SUPPORT RING l68T l 34 : 9l 66 :: 66 ll l0UTLET N0ZILE NELDS. l l l l l l l ll ll : :
l l UT : l l : ll ll 58 l l l 11 SG-lC l0 l 32 l - ! - ll 68 :: l LIMITED UT45 AND UT68 FROM THE TUBE : RT/MT :
lB-B SR-2 l45 9 l 100 0 ll 50 ll l PLATE SIDE DUE TO PROIIMITY OF l lB2.40 : FIGURE NO. A-56-1 l45T : 32 l 9: 68 ll 68 :: lNELDED PLATES. NO UT FROM THE : l lVOL : 168 l 2l 98 : I :: 49 : l SUPPORT RIN6 SIDE DUE TO SUPPORT l l lSUPPT RING-TO-TUBE PLT l60T l 32 : Il 68 :: 68 ll l RING CONFIGURATION.
! ! l l l l ll :- ---l l :
- : UT l l l l ll ll 61 l l l 11 l SG-1C l8 l 9l - ! -
- 198 1: l LIMITED UT45 AND UT68 FROM THE HEAD RT/MT l lB-D l IN 145 l 4l 96 : I ll 48 :: l SIDE DUE TO PR0llMITY OF NELD SR-1. l l
! l lB3.138 : FIGURE NO. A-56-1 !45T l 9! 9 l 180 l! 180 !! !
IV0L ! l68 l 18 l 99 8 ll 45 :: l l l l ! N0ZILE-TO-HEAD !60T l 0l 8 ! 180 ll 108 :: ! !
! l l l l l ll ll l l l l l UT l l l l :: !! 79 : : :
l1 i SS-!C l8 l 8 l 198 : l LIMITED UT45 AND UT60 FROM THE HEAD. RT/MT .l l45 l 4: 96 : 8 ll 48 :: SIDE DUE TO PROIIMITY OF WELD SR-1. l l lB-D l ON lB3.138 l FIGURE NO. A-SG-1 l45T l 9l 9 l 188 l 198 :: : :
lVOL ! 169 l 18 99 : B ll 45 ll l l l 1 l HEAD-T0-N0lILE 160T l 9: 8 l 189 ll 100 lI :
l l l l l l ll ll- -1 : i l l UT l l l l ll ll 79 : : :
.... ..... =:
' ATTACHMENT 4 ST-HL AE ity1 PAGE 14 OF5/3 SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE la ASME SECTION 11 CODE C0VERA6E LIMITATIONS SYSTEM: STEAM SENERATOR - 10 (CLASS 1 - PRIMARY SIDE) l l- LINE NO./ SUBASSEMBLY : : : l l CLASS l- WELD 10ENTIFICAl!0N 1 COVERAGE l l l CATEGORY l- WELD ID FIEURE : : : :
!! TEM NO. l- WELD CONFIGURATION l EXAM l 11 DIR: 2 ll EFF.ll l lFABRICATIEN :
!EI. RQMT l- EIAMINATION METHOD ! TYPE lNONE l0NLY : DIR ll COV.!: TOTAL l LIMITATION : NDE :
- =====================================================================================================2 ================:
!! : SS-!D lI l 34 - ! - ll 66 ll lN0 UT FROM THE SUFPORT RING SIDE DUE: RT/MT l lB-B SR-1 45 4l 96 : 0 ll 48 :: :TO SUPPORT RIN6 CONFIGURATION. l !
lB2.31 ! FIGURE NO. ? U-2 !45T l 34 l 9 66 ll 66 !! l LIMITED UT45 AND UT68 FROM THE HEAD l lVOL !68 : 'll 98 1 9 ll 45 :: l SIDE DUE TO PR011MITY OF INLET AND :
l HEAD-TO-SUPPORT RING lali l 34 l 8: 66 !! 66 !! l00TLET N0ZZLE WELDS. !
l l l l l l ll ll- l l l l l UT l l l ll ll 58 : : :
lt i SG-ID l9 l 33 l -
- ll 67 ll l LIMITED UT45 AND UT61 FROM THE TUBE : RT/MT l
!B-B SR-2 l45 : 1l 99 : 8 ll 58 ll l PLATE SIDE DUE TD PROIIMITY OF l l lB2.44 : FIGURE NO. A-56-2 !41T l 33 l 9: 67 ll 67 ll l WELDED PLATES. NO UT FROM THE l l IV0L : l68 l 2 98 : I ll 49 :: l SUPPORT RING SIDE DUE TO SUPPORT l l lSUPPT RING-TO-TUBE PLT 168T l 33 l 0: 67 :: 67 :: l RING CONFISURATION.
l l l ! ! ! !! i t ------ l l l l l UT l l l ll ll 60 : : :
- -l l1
- S6-1D l0 l 0l - l - ll 188 : l LIMITED UT45 AND UT68 FROM THE HEAD ! RTIMI :
lB-D : IN l45 l 5l 95 : I ll 48 :: lSILE DUE TO PR0!!MITY 0F WELD SR-1. l lB3.138 : FIGURE NO. A-SG-2 45T 9 0 l 100 ll 108 l l l l lUOL l68 l 11 89 l 9 ll 45 ll l l l l N0llLE-TO-HEAD 161T : 8: I 100 ll 100 ll l l i l l l l l ll : -------l. l l l l UT l l l l : ll 78 l l
- ... ....:-- : p :
l1 l 56-lO l8 8 - l -
ll 108 ! l LIMITED UT45 AND UT68 FROM THE HEAD l RT/MT l lB-D : DN l45 l 4: 96 l 8 ll 48 ll l SIDE DUE TO PRDIIMITY OF MELD SR-1.
lB3.138 : FIGURE NO. A-56-2 l45T l 8: 0 l 188 :: 100 ll l l l lUOL 168 l 10 l 98 l 8 ll 45 !! : : 1 l l HEAD-TB-N0ZZLE l68T l 0l 0 l 100 ll 108 :: : l l l 1 l l ! l ll ll-- -! ! l l UT l l l !! ll 79 l l l
-l
ATTACHMENT 4 ST HL AE 1839 PAGE 15 OF50 SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNii 1 PAGE 11 ASME SECTION XI CODE COVERAGE LIMITAi!0NS SYSTEM: REACTDR C00LANT - MAIN LOOPS (CLASS 1 PIPIN6) i - LINE NO./ SUBASSEMBLY : : l l l CLASS l- WELD IDENTIFICATION : 1, COVERA 6E : : l lCATE6ORY - WELD ID FIGURE l l l l
!! TEM NO. l- WELD CONF 16bRAi!0N l EXAM il DIR: 2 :: EFF.!! : lFAERICATION :
lEI. RGMT l- EIAMINAi!0N METHOD l TYPE lNONE 10NLY DIR ll COV. : TOTAL : LIMITATION l NDE :
- ==================================================================================================================
l1 31-RC-1102 l0 l 9l - l - ll 188 ll lNO UT45, UT45T, AND UT68T FROM THE : RT/PT !
lB-F i 1 l45/68 26 24 58 :: 62 :: lN0ZZLE SIDE DUE TO N0ZZLE CONFIGURA- :
IB5.138 : FIGUPE NO. A-RC-1 l45/68T: 8 8: 92 :: 92 ll -l TION. LIMITED UT45 FROM THE ELBOW l lVOL/ SURF : : : : : :: ll 85 ISIDE DUE TO WELD CONFI6URATION AND l 1 : N0ZlLE-TO-ELB0W -l l----- -
ll ll l SIZE OF SEARCH UNIT. ! !
! : : : : : :: l l l l l UT/Pi :PT 0l - l - ll - ll 188 : l 11 l 31-RC-1102 l8 l 0l - l - : 188 ll l LIMITED UT45T ON THE WELD AND PIPE : RT/PT lB-J l 2 l45 8: 8 188 :: 188 :: ISIDE DUE TO WELD CONFIGURAT!0N ANO l lB9.11 l FIGURE NO. A-RC-1 l45T : 92 0: 8 :: 8 ll------ SIZE OF SEARCH UNIT. l l lVOL/ SURF l l !! ll 69 : :
l l ELB0W-TO-PIPE ------l l l-----!l----- 1-------l l l l l l l l l ll :: : : :
! UT/PT :PT ! 4l - l - ll - !! 180 : ! !
l l- l
!! : 31-RC-1182 18 : 9l -
l - : 188 :: l LIMITED UT45i ON THE WELD DUE TO RT/PT l lB-J l 3 l45 l 0: 8 l 188 :: 108 :: l WELD CONF 16URATION AND SIZE OF : :
189.11 : FIGURE NO. A-RC-l l45T l 25 0l 75 :: 75 !!-------! SEARCH UNIT. l !
lVOL/ SURF l l l l l :: :: 92 : i !
l l PIPE-TO-ELBOW l ---- l ---- ! ! : ----- l l ------ ! l l l l l l l l ll :: : : :
- UT/PT :PT : 0: - ! - - : 188 : : :
!! 31-RC-1182 l9 : 0l - l - :: 198 :: l LIMITED UT45T ON THE WELD AND PIPE : RT/PT !
lB-J : 4 145 : 8l 9 188 ll 100 ll l SIDE DUE TO WELD CONFIGURATION AND :
189.11 : FIGURE NO. A-RC-1 45T l 50 l 8l 58 :: 58 l - l SIZE OF SEARCH UNIT. :
VOL: SURF : : : l ll :: 83 l l l l l EL50W-TO-PIPE l----------l----------1----ll------ l l l l ! l l l ll :: : l l
! UT/PT :PT 9l - l -
ll - :: 188 : : :
!! ! 31-RC-1192 lI : 8l - l - :: 188 :: l LIMITED UT45T ON THE WELD AND PIPE l RT/PT :
lB-J l 8 145 0l 0: 188 !! 188 ll l SIDE DUE TO WELD CDNFI6URAi!0N AND l lB9.11 : FIGURE NO. A-RC-1 l45i 50 01 58 ll 50 ::- --!S!ZE OF SEARCH UNIT. l lVOL/ SURF : l l l l ll :: 83 l l l l ! PIPE-TO-ELBOW l - ----- ---- ----- l ----- l ! ----- ! 1 -~ ~-- l l !
! : : : : : :: ll l l l UT/PT :PT l 0 - l - ll - :: 100 l .
- ..................= ....................:
A
. . ATTACHMENT ST H1:AE-18 r)y PAGE/e OF SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 12 ASME SECTION 11 CODE COVERA 6E LIMITATIONS SiSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 PIPING) l l- LINE N0./ SUBASSEMBLY : : : : :
l CLASS :- WELD IDENTIFICAT!0N : : 1 COVERA 6E : : :
l CATEGORY - WELD ID F16bRE : : ---- l l l
!! TEM NO. l- WELD CONFIGURATION : EIAM !! DIR: 2 :: EFF.! : l FABRICATION :
lEX. RQMT l- EIAMINATION METHOD : TYPE IN0NE l0NLY : DIR ll COV.ll TOTAL l LIMITATION : hDE :
- ======================================================================================:
il l 31-RC-1102 l0 l 8: - - !! 180 :: l LIMITED UT45 AND NO UT45T ON THE : RT/PT l lB-J l 9 l45 l 2 81 17 :: 58 : l WELD DUE TO WELD CCNFI6URATION AhD : l lB9.11 : FIGURE N0. A-RC-1 l45T 180 : 01 0 !! 0:- l SIZE OF SEARCH UNITS. ! :
VOL/ SURF : : : : : :: : 53 : :
l l ELBOW-TO-PUMP !------l-----l =l : ---- l ! ------- ! l l l l l l l :: ll l l l l l UT/PT :PT : 0l - l - : - : 100 l l l l1 l 31-RC-1202 10 l 35 l - -
ll 65 :: INO UT45, UT45T, AND UT60T FROM THE : RT/PT I lB-F : 1 I45/60 0! 50 50 :: 75 1: !N0ZZLE SIDE DUE TO N0ZZLE CONFIGURA-l l lB5.130 : F16URE NO. A-RC-2 l45/68T: II l 8 90 :: 90 : l TION. LIMITED UTO FROM THE ELB0W i :
VOL/ SURF : : : : : :: : 77 l SIDE DUE TO WELD CONFIGURATION ANO : !
! ! N0ZZLE-TO-ELB0W l------l-----l l-----l l-----: -------l SIZE OF SEARCH UNIT. l l
- : : : : :: :: l l l UT/PT lPT 01 - l - ll - ll 100 l l l l1 l 31-RC-1202 18 l 0l - l -
l 100 ll l LIMITED UT45T ON THE WELD AND PIFE ! RT!PT :
lB-J 2 l45 8: 8 l 180 :: 100 ll l SIDE DUE TO WELO CONFIGURATION AND :
189.11 : FIGURE NO. A-RC-2 l45T i 31 l 01 69 ll 69 !!------! SIZE CT SEARCH UNIT. ! l lVOL/ SURF l l l l l !! l! 90 ! !
l l ELBOW-TO-PIPE l------:-----l-----l ----ll----- 1-------l l l l l : : : :: ll l 1 :
- UT/PT lPT l 01 -i - ll -
- 180 l l l
- . -; ;_ ... - _=..- - ; ;
l1 31-RC-1202 10 l 8l - l -
- 100 ll l LIMITED UT45T ON THE WELD AND PIPE l RT/PT l lB-J ! 3 l45 : 0: I 100 ll 100 ll l SIDE DDE T0 HELD CONFI6URATION AND 199.11 : FIGURE NO A-RC-2 l45T l 27 l 0: 73 :: 73 ::------- SIZE OF SEARCH UNIT. :
VOL/ SURF l t ! l l ll !! 91 : : :
l P!PE-TO-ELB0W : ----- ---- ----- l ----- l l ----- l l - ------ l
! ! : : : : :: ll l l l l l Ul/PT lPT 0l - l -
ll -
ll 100 : : :
- . .g............... .............. .......... .. .......... ... . . - ....;............;
l1 31-RC-1202 10 1 0: - -
!! 100 !! l LIMITED UT45T ON THE WELD AND PIPE FT/PT l lB-J 4 l45 1 0 0 l 100 ll 100 :: l SIDE LUE T0 HELD C0NFIGURATICN AND lB9.11 : FIGURE NO. A-RC-2' 45T : 20 l 0l 80 ll 80 ll-------lS!ZE OF SEARCH UNIT. l 1 lVOL/ SURF : l l : : !! 93 : : l l ELB0W-TO-P!PE : ----- l ----- : ---- : ----- l l ----- : ------ : l l
! l ! ! l ll ll l l l l l UTIPT :PT : 0: -
ll 100 l l l g...........................= __...................... ...............:
ATTACHMENT 4
. ST-HL AE-st37 PAGE n OF50 SOUTH TEXAS PROJECT ELECTRIC SENERATING STAi!0N, UNIT 1 PAGE 13 ASME SECTION XI C0CE COVERA 6E LIMITATIONS l
SYSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 PIPIN6)
! l- LINE NO./ SUBASSEMBLY ! l l l l l CLASS l- WELD IDENTIFICATION l l 1 COVERAGE :
lCATE60RY - WELD ID FIGURE : !
l l l llTEM NO. l- WELD CONFIGURATION EIAM l l1 DIR: 2 : EFF.ll l IFABRICAT10N :
lEI. RDMT l- EIAMINAi!DM METHCD : TVPE lNONE lCNLY : DIR ll COV. : TOTAL LIMITATION : NDE :
- ====================================.:=================================u======================
11 31-RC-1202 l9 0 -
l - : 100 :: l LIMITED UT45T ON THE WELD AND PIPE : RT/PT :
lB-J l 8 l45 : I: 9: 180 !! 190 !! l SIDE DUE TO WELD CONFIGURATION AND : l IB9.11 : FIGURE NO. A-RC-2 !45T : 27 : il 73 :: 73 ::- lSilE OF SEARCH UNIT. :
lVOL/ SURF l l l l l !! ! 91 : : i l PIPE-TO-ELBOW l------l-----l----- -
- ! ---- l l ------- l l l l l l ! : !! !! ; l l l UT/PT lPT l 8l -
l - ll - li 100 l l l l l- l l--- l l1 ! 31-RC-1292 10 l 8l -
- !! 184 :: LIMITED UT45 AND NO UT45T ON THE RT/PT :
lB-J l 9 145 l 1 84 l 15 ll 57 :: WELD DUE TO NELD CONFIGURATIDN AND l l
!B9.11 : FIGURE NO. A-RC-2 l45T : 180 l 9 l' 8 ll 8 ::-------lSilE OF SEARCH UNITS. I !
- VOL/ SURF : : : : : :: : 52 l l l
! : ELB0W-TO-f9PP ------l----- l-----ll- : l i l l l : l l !! :: i l l l l UT/PT lPT l 0; ll - : 100 : : :
- .- -p .- .... .
- . i---- i l1 31-RC-1?a2 l0 0l -
1 - l 108 ll lNQ UT45, UT45T, AND UT68T FROM ikE : RT/PT l
- 145/68 l 8l 58 l 58 :: 75 ll lN0ZZLE SIDE DUE TO N0ZZLE CONF 16LRA-l l lB-F 1 195.138 l FIGURE N0. A-RC-3 145/60T: 17 l 8: 83 ll 83 ll ! TION. LIMITED UT45 FROM THE ELBOW
!VOLISURF l l ! : ll B6 l SIDE DUE TO WELD CCNFIGURATION AND l l l l N0ZZLE-TD-EL50W l-----l-----l----- !----! !-----l SI ZE OF SEARCH UNI T. l l l l l : : ll ll l ! !
UT/PT PT : 0l - l - ll - :: 108 : : :
- 1 31-RC-1382 18 l 9l - l -
!! 138 !! l LIMITED UT45T ON THE WELD AND PIPE : RT/PT l lB-J l 2 145 : I: 8 188 :: 100 :: ! SIDE DUE TO WELD CONFIGURATION AND l lB9.11 : FIGURE NO. A-RC-3 l45T l 50 l 8 50 :: 50 it-------l SIZE OF SEARCH UNIT. l l lVOL/ SURF : l l l :: : 83 l l l l l ELBOW-TO-P!FE l - l ---- ----- l ----- : ----- l l ------- l l l
! : l l l : ll l l !
UT/PT iPT : 9 - i -
ll -
- 100 : i l l ............:............:
l1 l 31-RC-1302 l8 : 9l -
- ll 100 !! l LIMITED UT45T ON THE WELD AND PIFE I RT/PT t lB-J l 3 145 8l 9 l 188 !! If8 :: SIDE DUE TO WELD CONFI6URATION AND 1 l lB9.11 : FIGURE NO. A-RC-3 l45T 32 6: 68 !! 68 it-------l SIZE OF SEARCH UNIT. l l IV0L/ SURF l l l !! !! 89 ! ! !
l l P!PE-TO-ELBOW ------l-----l-----l-----ll-----: -------l l 1 l ! l l !! :: l l i l UT/PT :PT l 8l - l -
ll - ll 120 l l l
_.......- ...... ..............................................................- _ ==:
ATTACHMENT V ST-HL AE- /F3'1 1AG.E._l3 OF Q)
SOUTH TEXAS PROJECT ELECTRIC 6ENERAillNi STATION, UNIT 1 PAGE 14 ASME SECil0N II CCDE COVERA 6E LIMITATIONS SYSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 PIPING)
! l- LINE NO./SUBASSEMPLY : : : l l CLASS :- WELD IDENTIFICATION : T, COVERA 6E l l l l CATEGORY l- WELD 10 FIGURE l------- -
l l
!! TEM NO. l- WELD CONF 16URAi!0N : EIAM !! DIR: 2 !! EFF.ll l IFABRICAi!0N i lEI. RGMT l- EIAMINAi!0N METHOD l TYPE lNONE l0NLY : DIR ll COV.l TOTAL LIMITATION NDE :
- ==========================================================================================================n====l 11 :~ 31-RC-1302 10 1 0 -
l -
ll 100 :: l LIMITED UT45T ON THE WELD AND FIFE : RT/PT
!B-J l 4 l45 l 0l 0: 100 !! let :: l SIDE DUE TO WELD CONFIGURATION AND l lB9.11 : FIGURE NO. A-RC-3 l45T l 50 : 0l 50 ll 50 ll lS!ZE OF SEARCH UNIT. l !
IVOL/ SURF : l l ll !! B3 : : :
- ELBOW-TO-PIPE l------! - : ---- l ---- : ----- : ---- --- l l l l l l l l ll : : : :
- : UT/PT PT l 0l - ! -
!! - : 100 l l l it : 31-RC-l!02 135 15 0? 85 !! 85 ll ING UT FROM THE MAIN RUN SIDE DUE TO PT l lB-J l 7 : ! l :: : ! COMPONENT CONFIGURATION. ! !
lB9.31 l FIGURE NO. A-RC-3 : : : l ll ll-------l l l lVOL/ SURF : : : : : l ll B5 : :
! l (* BRANCH CONNECTION ------:-----l-----l-----ll----- !-------l l l l : ! ! :: !! : :
- UT/PT :PT 0 - l - ll - ll 100 l :
1 31-RC-1302 10 0l -
- ll lie ll l LIMITED UT45T ON THE WELD AND PIPE : PT/PT l lB-J 8 l45 0 0 l 100 :: 100 ll ! SIDE DUE TO WELD CONFIGURAi!CN AND l l lB?.11 : FIGURE NO. A-RC-3 l45T 50 0 50 :: 50 ll- l SIZE OF SEARCH UNIT. l l IV0L/ SURF : : : : ll !! B3 l l l l PIPE-TO-ELB0W : ------ l ----- ! ---- ----- : ----- ! : -
l l l l l l ll ll l l l l l UT/PT :Pi l 0! - ? -
!! - ll 100 : i
- =
lt : 31-RC-1302 10 01 ll lie : l LIMITED UT45 AND NO UT45T ON THE : RT/PT :
10-3 9 145 ! 2: 85 l 13 :: 56 :: WELD DUE TO WELD CONFIGURAi!DN AND l l B9.11 : FIGURE NO. A-RC-3 l45T l 10 : 0l 90 !! 96 : -- lS!ZE OF SEARCH UNiiS. i IV0L/ SURF : : : : !! ll 82 : ! l l l ELB0W-TO-PUMP l------! = l ---- l ----- 1 ----- l l ------- : :
- : l l ;. !! ! ! l l l UT/PT :PT l 0! ll -
- 100 : : :
..: ........- ..............l............:
!! l 31-RC 1402 10 1 0: -
1 -
ll 100 !! lNO UT45, UT45T, AND UTLOT FPOM ikE : RT/Pi !
IB-F : 1 l45/60 l 19 : 31 l 50 :: 66 ll- lN0ZZLE SIDE DUE 10 N0ZZLE CONFIGURA-
- B5.!!0 ! FIGURE NO. A-RC-4 145/60T! 18 0 82 ll 82
- ------iil0N. LIMITED U1 3 AND Ui451 FROM i lVOL/ SURF : : : : : :: ll 83 lTHE ELB0W SIDE DUE TO WELD CONFIG- : :
- : N0llLE-TO-ELBCW :------!----- -----l-----ll----- !-------lURAi!0N AND S!!E OF SEARCH UNIT. l l : : ll ll l l l l l UT/PT PT l 01 ll - : 100 ! l :
ATTACHMENT '/
ST HL AE- /337 PAGE 19 OF Q) ._
SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNii 1 PAGE 15 ASME SECTICN 11 CODE C0VERA6E LIMITATIONS l SYSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 P!P!NG)
- - LINE NO./ SUBASSEMBLY : : : :
- CLASS l- WELD IDENTIFICATION
- : I COVERA 6E : : :
CATEGORY t- WELD ID FIGURE : : : : :
l ITEM NO. l- WELD CONFIGURATION : EXAM : :1 DIR: 2 :: EFF.ll l l FABRICATION :
EX RQMT l- EIAMINATION METHOD TYPE lNONE 10NLY : DIR : COV. : TOTAL LIMITATION : NDE
- =======================================:
!! ! 31-RC-1402 l0 0l - l - : 100 :: l LIMITED UT45T ON THE WELD AND PIPE : RT/PT l lB-J 2 45 : 0: 0 l 100 :: let :l l SIDE DUE TO WELD CONF 16URATION AND l lB9.11 i FIGURE NO. A-RC-4 l45T l 50 0 50 l! 50 ll------- SilE OF SEARCH UNIT. l l IVOL/ SURF : : : : : : :: 83 l l l l l ELB0W-TO-PIPE : - : --- l ----- ! :- ll l ! :
- : : : : : :: ll l l l l l UT/PT lPT : 0l -
l - !! - :: 100 : 1 p---- -; -:._ -; ....:
- 1 31-RC-t',02 10 ! 0 - ! -
- 100 :: l LIMITED UT45T ON THE WELD AND PIPE : RT/PT
!B-J l 3 l45 1 01 0 l 100 ll 100 :: ISIDE DUE TO WELD CONFIGURATION AND lB9.11 : FIGURE NO. A-RC-4 l4,5T l 50 : 0l 50 ll 50 ll------- SIZE OF SEARCH UNIT.
lVOL/ SURF : : : : : :: :: 83 : : :
- P!PF-TO-ELBOW
-:-----l----- -: : -------! : :
! l UT/PT lPT 0 - l -
ll - ll 100 : i p ...:. ....... .
.p- .-- .< >
11 l 31 RC-1402 l0 0l - ! - :: 100 :: ! LIMITED UT45T ON THE WELD AND PIPE : RT/PT :
IB-J ! 4 l45 0: 8 til ll 100 :: ISIDE DUE TD, WELD CONFIGURATION AND l
!B9.11 : FIGURE NO. A-RC-4 145T 50 8 50 :: 50 :: --iSilE OF SEARCH UNIT. :
!VCL/ SURF : l l l l ll :: 83 l l l l l ELB0W-TO-PIPE : l ----- l ----- l ---- ! ----- : : -
- l l l l l ll :: !, ! l l l UT/PT lPT : 0 - l -
ll 100 : :
p.. ....p_......... .. .... ..... . . ._ .-
- 1 : 31-RC-1402 l0 0 - l - : 100 !! l LIMITED UT45T ON THE WELD AND PIPE : RT/PT :
IB-J l 8 l45 0 0: 130 :: ISO :: ISIDE DUE T0 HELD CONF 16URATICN AND l ;
lB9.11 : FIGURE N0. A-RC-4 l45T 50 0 50 :: 50 : -------l SIZE OF SEARCH UNIT. : :
lVOL/ SURF : : : : : :: :: 83 : : :
- : PIPE-TO-ELB0W l------ -----:-----!-----:: ll-- l l l l l : l ll :: ! !
l l UT/PT PT l 0l -
1 -
!! - ll 100 l
- p --- -
l : -:
it : 31-AC 1402 10 l 14 ! - l - ll 86 :: l LIMITED UT45 AND NO UT45T ON THE : Rl/PT 16-J l 9 l45 0l 49 52 :: 76 ll l WELD DUE TO WELD CONFIGURATION AND l l lB9.11 : FIGURE NO A-RC-4 l45T : 100 1 0l 0 :: 0 : --- -; SIZE OF SEARCH UNITS. LIMITED UTO l lv0L/5URF : : : : :l :: 54 l0N THE HELD DUE TO WELD C0NFIGURA- l l l l ELB0W-TO-PUMP :------l-- --:-----:-----: -----::- ITION AND SIZE OF SEARCH UNIT. : :
l l l l :: ll l l l l l UT/PT :PT l 0 -
- ll - ll 100 :
p....- -
ATTACHMENT 4
. ST.HL AE lf39 PAGE A0 0F 50 SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 16 ASME SECTION II CODE COVERA 6E LIMITATIONS SYSTEM: REACTOR COOLANT - MAIN LOOPS CLASS 1 PIPIN6) l- LINE NO./ SUBASSEMBLY : l 1 :
. CLASS l- NELD IDENilFICATION l l I COVERA 6E : : :
lCATE6ORY - NELD ID FIGURE : l l l llTEM NO. l- NELD C0hFIGURAi!0N : EIAM i 11 DIR: 2 :: EFF.!! : IFABRICATION :
- EI. RQMT l- EXAMINATION METHOD : TYPE lNONE l0NLY DIR ll C0V.ll TOTAL l LIMITATION l NDE :
- =====================================================================================================================l l1 l 29-RC-1101 l24/45 8: 88 1 12 ll 56 ll l LIMITED UT DUE TO COMPONENT CONFIG- l RT/PT l lB-J l 2 : ! ! ll :: lURAi!0N. ! !
189.31 : FIGURE NO. A-RC-1 l l l l ll !! -lAPPROIIMATELY 121 FROM PIPE SIDE AND:
lVOL/ SURF l : : ll ll 56 1761 FROM BC SIDE IN ONE DIRECTION. l l l ! B' BRANCH CONNECT!0N - -! l l- l !!- !APPROXIMATELY 121 FROM BOTH SIDES IN: :
- ! : : ll :: TWO DIRECTIONS. :
l UT/PT PT : 8l -
l - ll - :: 100 l l l l l - --- l -
!! ! 29-RC-1101 124/45 : 18 : 99 l 9 !! 45 : l LIMITED UT DUE TO COMP 0NENT CONF 16- l RT/PT l lB-J 3 : l l ll ll !URATION. ! :
199.31 l FIGURE NO. A-RC-1 l l l l :: :- lAPPR0llMATELY 231 FROM PIPE SIDE AND: l lVOL/ SURF l l l l :: :: 45 !671 FROM BC SIDE IN ONE DIRECTION. :
l l12' BRANCH CONNECTION l- -l =l-----l -!! ll l l l l ! ! l l !! ll l l l l l UT/PT :PT 0l - - : - :: lle l ! !
11 29-RC-1181 l0 l 9l - ! - !! 130 :: l LIMITED UT45T FROM THE PIPE SIDE DUE! RT/PT :
lB-J ! 4 l45 : Il 9: 180 ll 108 :: TO THE NELD CONFIGURATION AND SIZE : :
lB9.11 : FIGURE NO. A-RC-1 145T l 38 : 9l 78 :: 78 ::- --l0F SEARCH UNIT. ! :
lVOL/ SURF : : l l ll ll 98 l l l l l PIPE-TO-ELB0W ------l -l - ----: : -
l l l : ll ll l l l
- : UT/PT :PT 0: - l - : - ll 188 : : :
it 29-RC-1101 10 8l - - l 100 ll lNO UT45, UT45i, AND UT60T FROM THE : RT/PT :
IB-F : 5 145/68 : 8: 8 l 198 ll 100 ll lN0ZZLE SIDE DUE TO N0ZZLE CONFIGURA-l l lB5.138 : FIGURE NO. A-RC-1 145/64T! let : 9: 9 :: 8 it- =: TION. LIMITED UT45T FROM THE ELB0W :
VOL/SUEF l l l l l ll :: 67 l SIDE DUE TO NELD CCNF16LRAil0N AND i l l l ELB0W-TO-N0ZZLE :- l
- :: ll l SIZE OF SEARCH UNIT. :
- : : : : l ll :: ! l l l UT/PT lPT l 9: - l - ll - : 130 l l l l1 : 29-RC-1281 l24/45 0 88 12 :: 56 ll l LIMITED UT DUE TO COMPGNENT CONFIG- RT/PT l lB-J : 2 : : : l ll :: lURATION. l l 199.31 : FIGURE NO. A-RC-2 : l l ll : lAPPR0XIMATELY 12% FROM PIPE SIDE AND:
Iv0L/ SURF : : : 56 :761 FROM BC SIDE IN ONE DIRECTION. : l l l 8' BRANCH CONNECT!0N 1------l----- -
-:-----ll- ll-- - APFROIIMATELY 121 FROM BOTH SIDES IN: :
- l l : :: :TWO DIRECTIONS. l !
l UTIPT :PT : 0l - l - l! - ll 100 l l
I ATTACHMENT 4 ST HL-AE-/ ?
PAGEc2l OF SOUTH TEMS PROJFCT ELECTRIC GENERATING STATION, UNIT 1 PAGE 17 ASME SECTION 11 CODE COVERA 6E LIMITAT10NS SYSTEM: PEACTOR COOLANT - MAIN LOOPS (CLASS 1 PIPING) l l- LINE NO./ SUBASSEMBLY : : : : :
- l !
ICLASS l- NELD IDENTIFICATION : l 1 COVERA 6E CATEGORY l- NELD ID FIGURE l l- - - - -
-l l
!! TEM NO. l- WELD CONFIBURATION : EIAM i l1 DIR: 2 !! EFF.ll l IFABRICAT!0N l lEI. RQMT l- EIAMINAT!DN METHOD l TYPE lNONE l0NLY : DIR :: COV.ll TOTAL l LIMITATION ! NDE :
l3333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333:
!! ! 29-RC-1201 l24/45 10 l 98 l 0 ll 45 ll l LIMITED UT DUE TO COMPONENT CONF 16- l RT/PT !
IB-J 3 l l l :: :: IURATION. l l lB9.31 : FIGURE NO A-RC-2 l : l ll ll------- APPR0llMATELY 231 FROM PIPE SIDE AND: l
!! ll lVOL/ SURF ! 45 l671 FROM BC SIDE IN ONE DIRECil0N. ! !
l l12' BRANCH CONNECTION l l l l ----: ! - l l ------ l l l l- l l l l l :: !! ! ! !
! ! UT/PT lPT l 0 - l - !! - :: 188 : : :
l1 29-RC-1281 l0 l 0l -
l -
- 188 :: l LIMITED UT45T FROM THE PIPE SIDE DUE RT/PT l lB-J ! 4 l45 8l 8 l 188 ll lle :: TO THE NELD CONFIGURATION AND S!!E : l lB9.11 : FIGURE NO. A-RC-2 145T l 36 : 8l 64 ll 64 :!-------l0F SEARCH UNIT. l l lVOL/ SURF l l l l ll ll 88 l l l l l PIPE-TO-ELBON :------ -----l l-----! l----: : -
l l
- : : l l ll :: : : :
l UT/PT PT l 0l -
l - : -
- i 100 l :
l1 l 29-RC-1201 l0 l 35 ! - l -
!! 65 :: lNO UT45, UT45T, AND UT60T FROM THE : RT/PT l lB-F : 5 l45/68 14 36 l 58 :: 68 ll lN0ZZLE SIDE DUE T0 h0ZZLE CONF 16UFA-! !
lB5.138 : FIGURE NO. A-RC-2 l45/68T 30 8 70 ll 78 ll- -l TION. LIMITED UT45T FROM THE ELBON ! :
!VOL/ SURF : : : : : :: :: 68 l SIDE DUE TO NELD CONFl6URAT!0N AND : :
- : ELB3N-TO-N0ZZLE l ------ ---- l = -----:: ll- - SIZE OF SEARCH UNIT. ! l l l l l l :: ll l l t l l UT/PT lPT , 8l - l - :l - il 188 : : :
il l 29-RC-1381 l24/45 : 0 88 12 :: 56 ll l LIMITED UT DUE TO COMPONENT CCNFIG- ! RT/PT lB-J l 2 : : l l ll :: !URATION. l l lB9.31 ! FIGURE h0. A-RC-3 l l l l ll ll-------lAPPR0llMATELY 121 FROM PIPE SIDE AND: l lVOL/ SURF : l l l ll !! 56 1761 FROM BC SIDE IN ONE DIRECTION. l l l 8' BRANCH CONNECTION ------!-----l-----!-----::- -!l- lAPPR011MATELY 121 FROM BOTH SIDES INl l l l l l l l ll ll iTN0 DIRECTIONS. :
- UT/PT :PT : 0l - l - l - ll 188 : ! l l1 : 29-RC-1331 :24/45 ! 10 90 0 :: 45 :: l LIMITED UT DUE TO COMPONENT CONFIG- l RT/PT IB-J : 3 l l l :: ll lURATION. l 1 lB9.31 : FIGURE NO. A-RC l l l l ll ll------- APPR0XIMATELY 231 FROM PIPE SIDE AhD: l lVOL/ SURF l l l l l :: ll 45 l671 FROM BC SIDE IN ONE DIRECTION. l l12' BRANCH CONNECT!0N ------l----- -----l-----ll-----ll-------l l l l l l l l l ll ll l ;
! ! UT/PT PT 0l -
l - ll - ll 100 : : :
ATTACHMENT 4 ST HL AE-/33'?
PAGE A2.0F 50 SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE IS ASME SECTICN 11 CODE COVERAGE LIMITATIONS SYSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 PIPIN6)
- - LINE NO./ SUBASSEMBLY : ! l l l l CLASS l- NELD IDENTIFICATION 1 COVERA 6E : :
l CATEGORY - KELD ID FIGURE : : --
i : :
ilTEM NO. l- NELD CONFIGURAT10N l EIAM !! DIR: 2 !! EFF. l l l FABRICATION :
lFI, RQMT l- EIAMINATION METHOD : TYPENONE l0NLY ! DIR ll COV.ll TOTAL : LIMITATION : NDE :
- 333333333333333332233333333333333333333333323E33333333333332333333333333:3333332223333333E3E232333333:33333333333333333=E233:
it : 29-RC-1301 10 -8 - ; -
ll 108 ll lNO UT45, UT45T, AND UT68T FROM THE : RT/PT l lB-F : 5 l45/68 0: 42 : 50 ll 71 :: lN0ZILE SIDE DUE TO N0ZZLE CONFIGURA-: l lB5.130 : FIGURE N0. A-RC-3 145/60T: 17 : 0 83 :: 83 ll iTION. LIMITED UT45T FROM THE ELB0W : :
VOL/ SURF l l l l l :: :: 85 ISIDE DUE TO NELD CONFIBURATION AND l !
l l ELBON-TO-N0ZZLE :------ -----l l----: : l! l SIZE OF SEARCH UNIT. l !
- : : : : ll !! l l l l UT/PT lPT l 8l ll - ll 1H l l l
- l. ......:. ............ .
!! ! 29-RC-1461 l24/45 : 10 l 98 : 0 !! 45 ll l LIMITED UT DUE TO COMPONENT CONFIG- l RT/PT l lB-J 2 : : l !! :: lURATION. ! !
199.31 : FIGURE NO. A-RC-4 : l l l- :: !!-------lAPPROXIMATELY 231 FROM PIPE SIDE AND:
!VOL/ SURF : l l l ll :: 45 1671 FROM BC SIDE IN ONE DIRECTION. :
116' BRANCH CONNECTION :- - l ----- l ---- l ---- l l ll------- l
- l l l !! !! l l l UT/PT :PT 9l - -
- !! 180 : : :
l it : 29-RC-1401 18 t 9l -! - : 100 ll ! LIMITED UT45T FROM THE PIPE SIDE DUE: RT/PT l lB-J l 3 l45 0 8: 100 ll tit ll lTO THE NELD CONFIGURATION AND SIZE : :
lB9.11 l FIGURE NO. A-RC-4 l45T : 23 0 77 :: 77 : ------l0F SEARCH UNIT. ! ;
VOL/ SURF : l l l l :: !! 92 l i l l PIPE-TO-ELBOW -
l ----- l ----- l ----- l l ---- l l ------ l !
! l l l l l :: :: l :
- UT/PT PT 9l - 1 -
- - : 186 : : :
!! ! 29-RC-1481 l3 ! 0l - ! -
!! 108 !l lNO UT45, UT45T, AND UT60T FROM THE l RT/PT :
lB-F : 4 l45/60 : 8: 5e : 58 ll 75 :: lh0ZZLE SIDE DUE TO N0ZZLE CONFIGURA- l l85.138 ! FIGURE NO. A-RC-4 145/64T: 22 9: 78 11 78 ::-------l TION. LIMITED UT45T FROM THE ELBON : l lVOL/ SURF l ! ! : : :: !! B4 ISIDE DUE TO NELD CONFIGURATION AND l l l ELBON-TO-N0ZZLE l------l-----l-----l-----l -----: ------- SIZE OF SEARCH UNIT. l !
! ! ! ! ! l !! : : : :
- UT/PT lPT 9 -
l -
ll - ll 188 l l l
- ............... . ..........- _ . . . . . . . . . . . . . . . - - _ . . . . . . . . . . - - .......- ........= :
ATTACHMENT f
. ST HL-AE- Ify)f PAGE Jb0FS a SOUTH TEXAS PROJECT ELECTRIC 6ENERATING' STAT 10N, UNIT 1 PAGE 19 A5ME SECTION 11 CODE C0VERA6E LIMITATIONS SYSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 P! PING) 1- LINE NO./SUPASSEMBLY l : l l CLASS l- WELD IDENTIFICAT10N : : I COVERAGE : : :
- CATEGORY :- WELD ID FIGURE : 1
!! TEM NO. l- NELD CONFI6URATION : EXAM l l1 DIR: 2 :: EFF.!: l l FABRICATION :
- E1. RQMT l- EXAMINATION METHOD TYPE IN0NE l0NLY DIR !! COV. l TOTAL LIMITATION NDE l l============================================================================================================================l l1 : 27.5-RC-Il03 l24/45 15 8l 85 :: 85 :: ING UT FROM THE MAld AUN SIDE DUE TO PT :
lB-J 3 : : : : ll ll l COMPONENT CONFIGURATION. l l lB9.31 : FIGURE NO. A-RC-1 : : ll ll- l l l lVOL/ SURF l l l l ll ll 85 :
4' BRANCH CONNECTION : -l l --- ----- l l - 1 -----! ! !
! ! ! l l !! :: ! !
! ! UT/PT PT l 8l - - ll - ll 100 l l l l l-
-:--- l 1 l 27.5-RC-l!a3 l24/45 l 15 l 2 85 !! 85 :: NO UT FROM THE MAIN RUN SIDE DUE TO PT !
lB-J l 4 : : : : :: :: l COMPONENT CONFIGURATION. l l lB9.31 : FIGURE NO. A-RC-1 : : : : :: !!- l l l lVOL/ SURF l l l l :: !! 85 l l l l l 4' BRANCH C0%ECTION 1 ------ l ----- l ---- ! ---- ----- l l - - :
- l l l :: :: : : :
- UT/PT :PT l 8l - l - !! -
!! 108 l l it ! 27.5-RC-1283 l8 l 9: - -
ll lie !! l LIMITED UT45T FROM THE PURP SIDE DUE RT/PT !
lB-J : 1 l45 l 0: B: let ll 180 :: lTO NELD CONFIGURATION AND SIZE OF 189.11 : FIGURE NO. A-RC-2 l45T l 11 : G 89 ll 89 !!------l SEARCH UNIT. l l lV0L/ SURF : l l ll ll 96 l l l l PUMP-TO-PIPE l= -:-
l-----ll :: l l l l l l l l l ll !! l l l l l UT/PT PT 9 -
l - ll - ll 100 l l l it 27.5-RC-1383 124/45 l 15 i 9: 85 ll 85 ll lN0 UT FROM THE MAIN RUN SIDE DUE TO PT l lB-J 4 l l l l :: !! l COMPONENT CONFIGURATION. :
189.31 l FIGURE NO. A-RC-3 : l l ll !! -l : :
VOLISURF : : l l ll ll 85 : :
l l 4' BRANCH CONNECTION l l-----l-----l-----ll-----ll-------l l l l l l l l l ll :: :
l ! UT/PT iPT Gl -
- !! - ll 189 : : :
11 : 27.5-RC-1483 l24/45 : 15 l 8l 85 !! 85 ll lNO UT FROM THE MAIN RUN SIDE DUE TO l PT l lB-J i 3 : : : !! ll- l COMPONENT CONFIGURATION. ! !
lB9.31 ! FIGURE NO. A-RC-4 l l :: : -------l l
!VOL/ SURF l ! l l ll ll 65 : l l l 4' BRANCH CONNECT!0N 1------ -----
:-----!!-----!!-= -l l l l l l : : : ll l l l l l UT/PT :PT l 8 - l -
!i -
ll 184 l l :
- __ - ...= _ -- -
ATTACHMENT 4
, ST HL AE- l PAGE M 0 SOUTH TEXAS PROJECT ELECTRIC GENERATING STAi!DN, UNii 1 PAGE 20 ASME SECTION 11 CODE COVERAGE LIMITAT!DNS SYSTEM: REACTOR COOLANT - MAIN LOOPS (CLASS 1 PIPING)
! l- LINE NO./ SUBASSEMBLY : : : : :
CLASS l- NELD IDENTIFICATION : 1 COVERAGE ! :
ICATEGORf l- NELD ID FIGURE : l l l l ITEM NO. l- NELD CONF 160 Rail 0N EXAM l1 DIR: 2 :: EFF. : : lFABRICAT10N :
!EI. RQMT l- EIAMINATION METHOD : TYPE ;NONE l0NLY : DIR !! COV.: TOTAL LIMITATION : NDE
- ======================================================================================================================
1 27.5-RC-1483 l24/45 l 15 0l 65 :: 85 :: ING UT FROM THE MAIN RUN SIDE DUE TO PT l lB-J l 4 : : : : :: ll l COMPONENT CONFI6URATION. l l lB9.31 ! FIGURE NO. A-RC-4 l l l l ll !!-------l l !
V0USURF : l l l :: : 85 ! :
- 4' BRANCH CONNECTION : ---~ ! ---- l ----- : ---- : - l l !
! l l l l l :: !! ! ! !
~! l UT/PT lPT l 0 - -
ll - :: 100 l l l g..... ...- .... .. ....- . .... .. ..... . ...;
9 1
i
r ATTACHMENT 4 ST-HL AE- f &3 ')
PAGE .ts OFSo SOUTH TEXAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 PAGE 21 ASME SECTION Il CODE COVERA 6E LIMITATIONS SYSTEM: REACTOR COOLANT (CLASS 1 PIPIN6) l l- LINE NO./ SUBASSEMBLY : : I l l l CLASS l- WELD IDENTIFICATION l l 1 COVERAGE : l lCATEGORf l- WELD ID FIGURE : - ------------ : :
!! TEM NO. l- WELD CONFIGURATION EIAM : !! DIR: 2 !! EFF ll l l FABRICATION :
EI. RQMT l- EIAMINAi!0N METHOD : TYPE lNONE 10NLY : DIR ll COV. l TOTAL l LIMITAi!0N NDE l
- ============================================== :========================================:
l1 ! 8-RC-1114 l0 : C - l - :: 100 :: l LIMITED Ui45 AND NO UT68 FROM THE : RT/PT !
lB-J l 1 l45/68 : I: 15 l 85 :: 93 :: ! VALVE SIDE DUE TO VALVE l l lB9.!! ! FIGURE NO. A-RC-18 45T l 9 8 l 180 !! lit !!- lCONFIGURAi!0N. l t VDL/ SURF : l l ! l ll ll 98 l l l l VALVE-TO-PIPE l- --
l ---- l ----- l l -l ! !
! ! l l l l :: ll l l l l l UT/PT lPT 0l - l -
ll - : 184 l l l
!! ! 8-AC-1214 19 : 9l - l - ll 100 ll l LIMITED UT45 AND NO UT64 FROM THE : RT/PT lB-J 1 145/68 : Ol 20 : BI :: 98 :: ! VALVE SIDE DUE TO VALVE l l lB9.11 l FIGURE NO. A-RC-11 145T : 9: 8: let : lie : ------- CONFIGURATION.
lVOL/ SURF ! ! l l ll ll 97 : :
! : VALVE-TO-PIPE ----- l ----- l ----- l ---- ! l ----- 1 ------- l l
- : : : : ll :: l l l l Ui/PT :Pi ! 8: -
ll 100 : : :
- .........:... .. .-- -. ..... . .... .- = . .. .........
it 6-RC-1915 l8 l 5: - l - ll 95 ll l LIMITED UT FROM THE 00hMSTREAM SIDE l RT/PT :
IB-J : 2 145/68 ! Il 7l 93 :: 97 !! :DUE TO PRDI!MITV 0F LINE 6-RC-1912. ! :
IB9.11 : FIGURE NO. A-RC-6 l45T 7 0 93 :: 93 ll- -l l lVOL/SUFF ! l l l l ll :: 95 : :
! t ELB0W-10-ELB0d l- = l ----- l ---- ---- l l ---- l l ------- l :
- : : l ll :: l l l l l Ui/ Pi Pi 9l -l - :: - ll 104 : : :
!! ! 6-RC-1915 18 l 9 - l - ll !$8 ll l LIMITED UT45T FROM THE TEE SIDE DUE : RT/FT i lB-J l 11 l45/68 l 0: 0 l 100 :: 198 ll lTO TEE CONFI6URATION. :
89.11 : FIGURE NO. A-RC-6 l45T l 9l 9l 91 :: 91 !!- -l l l lV0L/ SURF : l l l :: :: 97 : l l l PIPE-TO-TEE : ------ ---- - l ---- l ---- ! ----- : ------- l l l l l l l l l ll :: : : :
l l UT/PT :Pi l 9 -
l - !! - ll 100 l l l
- .........:... .............. ...... .................... .... ...: .. ...... ......................:..=__ -.:
l1 6-RC-1915 l0 1 0 - l -
!! 108 ll : RT/PT :
IB-J 12 !45 8: 0 l 180 :: !08 :: : l lB9.11 : FIGUFE NO. A-RC-6 !45T l 8: 8 l 196 ll 100 l -------: l l IVOL/ SURF : : : : i :: ll 100 : :
l l TEE-10-PIPE :------l-----l-----l-----ll-----:!------- LIMITED PT ON THE TEE SIDE DUE 10 l :
i : : : : :: ll IFR0llMITY OF WELDED SUFFORT l :
- l Ui/PT :PT : 1l - l - ll - ll 99l BRACKETS. : :
- __ ...........___ ==- .......=- -- -..........;
ATTACHMENT 44 ST HL-AE-/f39 PAGE .24 0F SO SOUTH TEIAS PROJECT ELECTRIC GENERATING STATION, UNIT I PAGE 22 ASME SECTION !! CODE COVERA 6E LIMITATIONS
-SYSTEM: REACTOR COOLANT (CLASS 1 PIPING) l l- LINE NO./SU6 ASSEMBLY l l l l
! CLASS l- NELD IDENTIFICAT10N .
l I COVERA 6E i l l l CATEGORY :- NELD ID FI6URE l ! ! !
! TEM NO. !- NELD CONFIGURATION ! EIAM : il DIR: 2 !! EFF.it : lFABRICAi!0N i lEI. ROMT l- EIAMINAi!0N METHOD ! TVPE lNONE l0NLY : DIR !l COV.ll TOTAL : LIMITATION : hDE :
- ======================== 2:======================:
!! 4-RC-1320 l0 01 -
l -
il 100 !! ! LIMITED UT45T FROM THE TEE SIDE DUE : RT/PT :
IB-J l 6 !45 l I: I l 100 : let :: TO TEE CONF 16URAT10N. l l l89.!! FISURE NO. A-RC-9 l45T : 12 : Il 88 :: 88 :: : :
lVOL/ SURF : ! : 1: ll 96 l !
- P!PE-TO-REDUCING TEE l- :----- :-----: -----!: l l l l l l l l l ! ll ! !
! ! UT/PT :Pi 8l - l -
1: 100 l :
=
ATTACHMENT 4 '#
ST HL- AE- /337 PAGE 2? OF 50 p
SOUTH TEIAS PROJECT ELECTRIC BENERATING STATION, UMli 1 PAGE 23
,ASME SECTION 11 CODE C0VERAGE LIMITATIONS
-' SYSTEM: RESIDUAL HEAT REMOVAL l CLASS 1 PlPIN6) e .-
l l- LINE NO./ SUBASSEMBLY : : : :
ICLASS l- WELD IDENTIFICATION : l 1 COVERA 6E : : :
! CATEGORY l- WELD ID FIGURE : : : : :
ilTEM NO. l- WELD CONFIGURATION : EIAM il DIR 2 ll EFF. : l IFABRICATION :
!EI. RQMT l- EIAMINATION METHOD .l TYPE lNONE 10NLY : DIR :: COV.!! TOTAL l LIMITATION : NDE !
- ss=:::::== :::::::::::::::::::::::::::::::::::::======================================32:================:
it 12-RH-!!01 18 : 9l -
l - :: 100 ll l LIMITED UT45 AND NO UT63 FROM THE : RT/PT lB-J : 16 145/68 : Ii 9: 91 :: 96 :: ! VALVE SIDE DUE TO VALVE CONFIGURA- l l H.11 : FI6URE NO. A-RH-1 l45T ! $i 8: IIe ll 188 ll -! TION. l l IV0USURF l : l l l !! i: 99 : : :
'l l P!FE-TO-VALVE ------ l ----- l ---- l ----- : ----- i ------- ! !
- : , l i ll :: , i
- UT/PT :PT ' l - l - !! -
- 108 l l l
- 1 l 8-RH-ill2 l0 l 9: - l -
- 100 !! l LIMITED UT45T FROM THE TEE SIDE DUE.: RT/PT l lB-J 2 145/68 :' I : I 100 :: 100 ll iTO TEE CONFIGURATION. l lB9.11 l FIGURE NO. A-RH-4 l45T !< 4 : 9l 96 !! 96 !!- l l l IV0L/ SURF : : 4 .: l- !! :: 99 : ,
i PIPE-TO-TEE ----- l ---- ----- l ----- l l ---- 1 -'---- ; < l l l l : 1 : l ll ;: l l UT/PT :PT ' : ! -
l -
- ll 180 : :
!! S-RH-1212 l8 9 - l -
ll 108 :: l LIMITED UT45 AND NO UT60 FROM THE : RT/PT lB-J i t 45/60 : 9l 7' 93 :: 97 :: : VALVE SIDE CUE TO VALVE CONFIGURA- l l 189.!! l FIGUGE NO. A-RH-2 l45T 9 0: 109 :: 100 ll-------l TION. l l IV0L/SUFF : ! l :: :: 99 : :
l l VALVE-TO-PIPE l ----- l -- --- l ----- l ----- l l ----- i 1 ------ :
! ! ! : : 1: ! ! ! !
UT/PT -
PT l l -
ll - : 196 : : :
it l 8-RH-1212 10 0l - l - ll 108 ll l LIMITED UT45T FROM THE TEE SIDE DUE RT/PT l lirJ ! 2 l45/68 l I: P"186 ll 100 :: !TO TEE CONFIGURATION. !
- B9.11 :. FIGURE NO. A-RH-2 45T l 6l 0l 94 :: 94 : -----l l lVOL/ SURF : l l l ll :: 98 : l l l l PIFE-TO-TEE l------l----- -----l----- 1-----! -------l l !
- l l l 1: ll l l l
! ! UT/PT lPT I -
! - ll -
- Mit : !
i
ATTACHMENT ST HL-AE-isv) 4 PAGE Jtt OF 68 SOUTH TEIAS PROJECT ELECTRIC SENERATING STAil0N, UNIT 1 PAGE 24 ASME SECTION II CODE COVERAGE LIMITATIONS SYSTEM: SAFETY INJECTION (CLASS 1 PIPING)
!- LINE NO./SUBASSEMBLf : l l l CLASS l- WELD IDENTIFICAi!DN : 1 C0VERA6E : .:
- l l :
l CATEGORY - NELD ID FISURE l
!! TEM NO. l- NELD CONF 160RAi!ON : EIAM l1 DIRl 2 :: EFF.!: !. FABRICATION l
!EI. REQMT - EIAMINAi!0N METHOD TYPE lNONE l0NLY DIR :: COV. TOTAL LIMITA N l NDE :
- :::::= = === :::::::::::::::::::::::::::::::::: ::== = = = = = == = == = = == == == == == == = = = = = = == = = == == == = = == = = = = = = = = = = = = = = == = = == == =m a n u s u !.
- 1 d-S1-1108 l8 l 5l - l - ll 95 :: l LIMITED UTI AND UT45T FROM THE TEE : RT/PT lB-J ! 2 l45/68 : I I l 108 :: 100 ll iSIDE DUE TO TEE CONF 16URAT10N. l l lB9 !! FIGURE NO. A-SI-3 l45T l 5l 8: 95 ll 95 ll -
- l lVOL/ SURF : : : : ll : 97 l l l l l P!PE-TO-TEE :------l-----l-----l-----ll-----::
l l l l l l :: ll l l l l l UT/Pi lPT l 9 - l -
!! 100 l ! :
it ! 8-S!-1188 lI l 4l - l -
- 96 :: ! LIMITED UTI AND UT45T FROM THE TEE : RT/PT l
!B-J l 3 l45/68 ! B: 0: 100 !! 188 ll l SIDE DUE TO TEE CONFIGURATION.
lB9.11 : FIGURE NO. A-SI-3 l45T ! 4 0l 96 : 96 : -------l l l VOL/ SURF : : : : :: :: 97 : l l l l TEE-TO-PIPE ------
l l ---- : ---- : ------- l l l l l l l l :: : : : :
- : Ui/PT lPT 4: -
ll -
- 180 l l
- .........:. .. ........ .......... .. .. - ...- .............:. ...... ..... =...
il l 8-SI-1283 l8 : 5: -
l - : 95 ll l LIMITED UTI AND UT45T FROM THE TEE l RT/Pi :
IB-J l 2 l45/60 1 8l 0: 100 :: 188 ll l SIDE DUE TO TEE CONFIGURATION. ! !
lB9,t1 : FIGURE NO. A-SI-4 l45T l 5 0 95 :: 95 : - -l ! l 1
IV0L/ SURF l : : !! :: 97 : :
l l PIPE-TO-TEE l------l-----l----- -----: -----ll-------l l l l l l l l : > l l l l l UT/PT lPT l 0l -
l -
ll -
- 100 : : :
it 8-SI-1208 l0 4l - l - ll 96 :: LIMITED UT8 AND UT45i FROM THE TEE l- RirPT :
lB-J 3 !45/68 : 8l 0 ! 100 :: 189 : l SIDE DUE TO TEE CONFIGURATION. J l lB9.11 : FIGURE NO. A-St-4 l45T 4l 0l 96 :: 96 l:-------! :
lV0L/ SURF ! ! l l :: ll 97 : : :
- TEE-TO-P!PE l ------ l ----- l ---- l ---- ! ! ----- l l -- l l l l l ! l l l ll ll l l l
-: UT/PT :Pi l 9l -
l -
- - ll LIG l : :
!! 8-$1-1327 l0 ! 2l -
! - ll 98 !! l LIMITED UTS AND UT45T FROM THE PIPE : RT/PT l lB-J l 2 145/68 l 9l 9 l 100 !! 1E3 :: l Site DUE TO FRDIIMITY OF BRANCH l l lB9.11 : FIGURE N0. A-St-5 l45T l 2l 0: 98 ll 98 ::----- CONNECTION, ! l lV0USUFF l 1 l l : :: !! 99 : ; l l l TEE-TO-PlFE --- --- l ----- ! ---- l ---- l l ---- l l ------- l l l l ! ! ! l l :: : : l l 1<
l l Ui/PT lPi l 0l - l - ll - ll lid l :
. Y
, ATTACHMENT y ST HL AE /f39
_PAGE 49 0FSn SOUTH TEIAS PROJECT ELECTR!C.6ENERATING STAT 10N, UNIT 1 PAGE 25 ASME SECTION !! CODE COVERALE LIMITAT10NS SYSTEM: SAFETY INJECTION (CLASS 1 P! PIN 6) t :- LINE NO./ SUBASSEMBLY : , : :'
- CLASS l- NELD IDENTIFICATION ! ! I COVEEE ' ! l l
'CATE60RY :- NELD ID FIGURE : : : : :
llTEM NO. l- WELD CONF 160 RAT 10N : EfAM ! l1 DIR: 2 :: EFF.:: l lFAERIEATION !
lEI. REQMT:- EIAM METHOD i TYFE lNONE l0NLY : DIR :: CJV.!: TOTAL : LIMITATION NDE :
3333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333l
!! 8-SI-1327 , l0 l 3 -
l -
- 97-:: l LIMITED UTS AND UT45T FROM THE PIPE : RT/PT l
!B-J 3 l45/68 ! I: I i let :: 11e :: SIDE DUE TO PRDIIMITY OF BRANCH l l lB9.11 ! FIGURE NO. A-51-5 145T l ,3: I! 97 :: 97 : ------: CONNECTION.
lVOL/ SURF : : : : ll. li 98 l l
- : P!PE-TO-ELBON 1 ----- l ----- l ----- l ----- ! --- : : ----- : !
l l l l l l :: : : : :
- : UT/PT : !PT l 0l - -
- let : t
.:.... .. .... .... ...... -: _ l lt 6-51-1211 l0 l 0l -
l - : 100 !! lNO UT45 AND UT68 FROM THE VALVE SIDE: RT/PT IB-J ! ! 45/68 : I: 5l 95 :: 98 !! :DUE TO VALVE CONFI6URATION. ! :
189.!! FIGURE NO. A-SI-5 l45T : 9: 0 100 :: let -------I : :
lVOL/ SURF : !. :: !! 99 : : :
- : VALVE-TO-PIPE l ------ l ----- ---- ! ----- l l ----- l l ------ l l l l l l l l l :: !! : ,
i
- UT/PT :PT : 8l : -
- - ll 189 : : :
- :- ...........- ...... - ._ . .. .g ..
lt ! 4-SI-1211 l9 : 8: - ! - ll 100 :: l LIMITED UT45 AND UT45T FROM THE TEE : RT/PT l lB-J 2, , l45/68 : 6: 28 : 66 :: 80 :: ISIDEDUETOTEECONF16URAT10N. NO l 169.11 : FIGURE NO. A-SI-5 145T l 9l 8: 91 :: 91 ll------lUT68 FROM THE TEE SIDE DUE TO TEE : :
lVOLISURF : i l 1 : : ll 98 lCONFI6URATION. l l l l P!PE-TO-PEDUCING TEE - -:-----! : ----l l----- : - l l l l l l l l l ll :: !. l l l : UT/PT :PT : 8l -
l -
!! - ll 108 : : :
!! 6-SI-1327 !8 : I: - l - :: III :: lNO UT45 AND UT!.3 FRGM THE VALVE SIDE: RT/PT lB-J l 1 145/68 8l 26 : 74 :: 87 :: lDUE TO VALVE CONFI6URATION. : .
lB9.11 : FIGURE NO. A-St-5 l45T : 8: 9 188 :: 100 :: --
lVOL/ SURF : l l l l :: ll 96 : l l l VALVE-TO-PIPE :- 1 -- l ----- l ----- : ---- : ------- : :
- l l l l :: ll l l l l l UT/PT lPT : 0l -
l - !! -
- 100 l l a
ATTACHMENT 8f ST.HL AE t23r)
PAGEJ0 OFSO
$i
. SOUTH TEIAS PROJECT ELECTRIC 6ENERAi!N6 STAi!0N, UNii 1 PAGE 26 3.
ASME SECTION 11 CODE COVERASE LIMITATIONS SYSTEM: STEAM SENERATOR - lA CLASS 2 - SECONDARY SIDEI l l- LINE NO./ SUBASSEMBLY : l' :
l CLASS l-NELDIDENTIFICAi!DN : 1 COVERA 6E : : :
l CATEGORY - NELD ID FIGURE : : : :
!! TEM NO. l- WELD CONF 16URAi!0N ! EIAM l1 DIR: 2 :: EFF.!! l FABRICATION
. lEI. RDMT !- EXAMINAi!0N METHOD : TYPE lNONE l0NLY : DIR :: COV. l TOTAL ! LIMITATION ! NDE :
- ===============================================,
l2 l SG-IA 8 9 - l -
- 91 :: l LIMITED UT ON BOTH SIDES OF THE NELD RT/MT l
!C-A : St l45 l 8: il 92 :: 92 ll lDUE TO PR0llMITY OF INSTRUMENTATION :
1C1.!8 : FIGURE NO. B-56-1 l45T ! 9 0l 91 :: 91 :: ! LINES AND INSPECTION HOLES. l l
!VOL l l60 : 8: 3l 89 !! 91 :: l l l l l TUBE PLT-TO-STUB BRRL l68T 9l 8: 91 :: 91 ll l l l l l l ! l l ll ll l l i ! UT l l l l :: ll 91 ! l l
- .... ...-- ...... :. .. .. .g l2 l 56-1A lI l 9: -
l - ll 100 l l LIMITED UT68 FROM THE SHELL SIDE DUE: RT/MT l lC-A : 55 145 : I I 100 ll 108 ll lTO PROIIMITY OF AUILLIARY FEEDNATER 1C1.18 : FIGURE NO. B-SG-1 !45T l 9: 0: 100 :: let ll lN0ZZLE AND TRUNNIONS.
lVOL l68 : I: 2 98 ! 99 !! : :
1 TRANS CONE-TO-SHELL l68T 9l 8 100 :: 180 :: ! l i l l l l !! ! l ----- !
! ! UT : l :: ll 99.8 : : :
...... .:- - ~;. .........;
12 : 56-1A l0 0! - ! - :: let ll l LIMITED UT68 FROM THE HEAD SIDE DUE : RT/MT lC-A 57 l45 : 8: B 188 :: 180 :: TO PR0llMITY OF NELDED LU65. :
1C1.28 : FIGURE NO. B-SG-1 l45T l 9: 0 ild ll 108 :: : : !
IV0L 160 l Il 1 99 l199.5 :: : :
! ! 5 HELL-TO-HEAD l68T l 8: 8 100 ll 198 ll : :
l l l : :: ll -: : :
- UT : l l ll ll 99.9 : : :
I -
ATTACHMENT 4 ST-HL AE l&30 PAGE 31 OF c;c SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 FAGE 27 ASME SECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: STEAM GENERATOR - 1B CLASS 2 - SECONDARY SIDE)
- - LINE NO./ SUBASSEMBLY : : : :
l CLASS l- NELD IDENTIFICATION : 1 COVERAGE l : :
- CATE6ORY :- WELD ID FIGURE : :------------------= = =--
- l l ITEM NO. l- NELD CONFIGURATION : EIAM il DIR: 2 :: EFF.ll l IFABRICAT!DN :
lEI. RGMT l- EIAMINATION METHOD l TYPE lN0hE l0NLY : DIR ll COV.:: TOTAL LIMITATION : NDE :
l ::::::::::::::::::::::::::::::===:::::::::::::::::::::::::::::::::::::::::::::::::::==================================23::::
2 56-1B !8 : 9 - l - : 91 :: l LIMITED UT ON BOTH SIDES OF THE NELD: RT/MT :
C-A : St l45 8: 8 92 :: 92 :: lDUE TO PR0!!MITV 0F INSTRUMENTAi!0N ! l lC1.38 : FIGURE NO. B-SG-1 l45T : 9: 8l 91 : 91 : l LINES AND INSPECTION HDLES. l !
lVOL 60 l 8! 3l 89 :: 91 ll l l
- TUBE PLT-TO-STUB BRRL 168T : 9l 0l 91 :: 91 !! l l l l l l : : : :: : ------ l l :
l l UT : : : :: :: 91 : : :
l2 : SS-1B l8 l 8! - l - ll 100 ll l LIMITED UT68 FROM SHELL B DUE TO RTIMT :
lC-A _: S3 l45 0 0 100 :: III ll lPR0!!MITY OF LONER LATERAL SUPPORT l l lC1.18 : FIGURE NO. B-SG-1 l45T l 0 9 l 100 !! 100 ll l RING BEAM. l l
!VOL : 68 : 8: 7 93 :: 97 ll l t :
l SHELL A-TO-SHELL B 68T l 0 0: 100 :: III :: l l
! : : : l ll ! ! ----- : :
- UT l : : : :: ll 99 l l !
12 : SG-1B :8 : 0l - ! - !! 100 :: ! LIMITED UT68 FROM THE SHELL SIDE DUE RT/MT .
C-A 55 l45 : I: 9 l 100 ll 108 :: TO PR0l!MITY OF AUI!LIARY FEEDWATER 1C1.19 : FIGURE NO. B-S6-1 l45T l 9: 9 1 100 :: 100 ll lN0ZILE AND TRUNNIONS. l l IV0L l60 9l 2l 98 ll 99 :: : l l l TRANS CONE-TO-SHELL 68T l 9: 8 i 100 :: 100 :: l l l l l l l l l :: : -----! l
- : UT : : : : :: :: 99.8 l l l l- : -; ....: --
q 12 : SG-!B !9 : 0 - l - : 108 :: LIMITED UT60 FROM THE HEAD SIDE DUE : RT/MT :
C-A : S7 l45 : I 8: 180 ll 188 :: !TO PR0llMITY OF NEltED LUSS.
lC1.20 : FIGURE NO. B-56-1 l45T : 9 9 l 186 :: 100 !! ! !
IV0L : let : I 1 99 l199.5 ll l l l l l SHELL-TO-HEAD l6IT l 9 0 l 158 :: lil ll l l
- l l : :: :: l l l l l UT l l l l !! ll 99.9 : : :
ATTACHMENT 4 ST HL AE 1139 PAGEJL OFSO SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STAi!0N, UNIT 1 PAGE 28 ASME SECTION !! CODE COVERA 6E LIMITATIONS SYSTEM: STEAM 6ENERATOR - IC (CLASS 2 - SECONDARY SIDE) l- LINE NO./ SUBASSEMBLY : l : :
l CLASS - WELD IDENTIFICAi!DN : : 1 COVERASE : :
l CATEGORY l- NELD ID FIGURE l l l l l llTEM NO. l- NELD CONFIGURATION : EIAM 11 DIR: 2 :: EFF.:: lFABRICAi!0N l
!EI. RQMT l- EIAMINATION METHOD : TYPE lNONE l0NLV : DIR :: COV.:: TOTAL : LIMITATION : NDE :
- ================================================================================:
l2 : SG-1C 18 l 11 : -
l -
1: 89 :: l LIMITED UT ON BOTH SIDES OF THE NELD: RT/MT l lC-A : St l45 8 8 l 188 :: 188 :: DUE TO FR0l!MITY OF INSTRUMENTA110N :
lC1.38 : FIGURE NO. B-SG-1 l45T 11 8 Si !! 89 ll l LINES AND INSFECTION '
HDLES. : :
- VOL l l68 1: 12 l 87 :: 93 ll l :
- TUBE PLT-TO-STUB BRRL l68T 11 l 8 89 :: 89 i: : l
! : l l l :: !!-- l l l l ! UT l l l l ll ll 92 l ! :
- ..- .g. . . . . . . . .....
l2 : S6-1C 18 l 8l - l - ll 188 !! l LIMITED UT68 FROM SHELL B DUE TO l RT/MT IC-A S3 I45 : 8: 8 188 !l 188 :: lPR011MITY OF LONER LATERAL SUPPORT l l lCt.18 : FIGURF NO. B-56-1 l45T l 8l 8 : 188 :: ISO :: l RING BEAM. :
lVOL i 168 8l 11 89 :: 95 :: : :
l l SkELL A-TO-SHELL B 168T l 8 8: 188 ll 188 ll l l l l l l l l l ll l l ------ : :
- : UT : : : :: :: 99 ! l l l2 56-1C l8 : 8l - ! - : 188 :: l LIMITED UT68 FROM THE SkELL SIDE DUE: RT/MT l lC-A : 55 l45 : 8: 8 l 188 :: 188 :: TO PR011MITY OF AU1ILIARY FEEDWATER : :
lC1,18 : FIGURE NO B-56-1 145T ! 8: 8 ! 188 ll 188 ll lN0ZZLE AND TRUNNIONS. l lVOL 168 : 8: 1 99 ll99.5 :: : : :
- TRANS CONE-TO-SHELL l68i 8 8 188 :: 188 :: l l
- : : : : :: ll =l l t UT l l l ll : 99.9 : : l
=
l l2 : SG-!C 18 8: - l -
- 188 :: l LIMITED UT68 FROM THE HEAD SIDE DUE l RT/MT l lC-A : S7 145 l 8 8: 188 ll 188 :: 110 FR011MITY OF NELDED LU65. .
lC1.28 : FIGURE NO. B-SS-1 !45T 8: 8 18J :: 188 l! l l l VOL l68 l 8 1l 99 1:99.5 :: : :
l l SHELL-TO-HEAD l68T : 8: 8: 188 :: 188 :: : l l l l l l : : !: l l l i ! UT : : : :: :: 99.9 l l l
- ATTACHMENT 4 ST HL AE-It3?
PAGE 33 0F50 SOUTH TEIAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 PAGE 29 ASME SECTION 11 CODE COVERA 6E LIMITATIONS SYSTEM: STEAM GENERATOR - 10 (CLASS 2 - SECONDARY SIDEI l l- Ll4E NO./ SUBASSEMBLY : l l .: l l CLASS l- NELD IDENTIFICAT!DN : 1 COVERA 6E : :
CATEGORY l- WELD 10 FIGURE l l l' :
l ITEM NO. l- NELD CONFIGURATION : EIAM l l1 DIR: 2 ll EFF.:: l l FABRICATION :
lEI. RGMT l- EIAMINATION METHOD l TYPE lh0NE l0NLV DIR ll COV. l TOTAL : LIMITATION : NDE l
- =================================================================================33l l2 : SG-1D 10 9 -
l - 91 :: l LIMITED UT ON BOTH SIDES OF THE NELDl RT/MT :
IC-A l S1 145 l 8: 8: 92 : 92 :: :DUE TO PR011MITY OF INSTRUMENTATION l l lC1.30 : FIGURE NO. B 56-1 l45T : 9: 8: 91 :: 91 :: l LINES AND INSPECTION H0LES. :
lVOL : l68 : 8 3 69 :: 91 :: : : :
- : TUBE PLT-TO-STUB BRRL l68T l 9l 0l 91 :: 91 ll : :
- : : : : : :: ll-- l l l l l UT : : l l :: :: 91 : :
12 56-10 l3 : I: - l - :: 188 :: l LIMITED UT68 FROM SHELL B DUE TO RT/MT l C-A : S3 145 l 8l 8 l 188 :: 100 ll :PR0!!MITY OF LONER LATEFAL SUPPORT l !
lC1.10 : ' FIGURE NO. B-56-1 145T l 9i 8 l 100 :: 188 :: tRING BEAM. l l lVOL l68 : 8l 4 96 : 98 ll l :
- : SHELL A-TO-SHELL B !61T l 0l 8 l lie :: 108 :: l l l l l l l ll !!-------l l l l l UT : : : :: ll 99.6 : :
2 : SG-1D 18 8l - l - !! 120 ll l LIMITED UT60 FROM THE SHELL SIDE DUE: RT/ni lC-A 55 l45 l 0l 8 l 100 :: 188 :: lTO PROIIMITY OF AUI! LIAR) FEEDNATER l :
1C1.18 : FIGURE NO. B-SS-1 l45T l 9l 8 l 188 ll 108 :: lN0llLE AND TRUNNIONS. ! l IV0L 168 l 8l 2l 99 :: 99 :: :
- TRANS CONE-TO-SHELL l68T : 8: 3 180 :: 109 li l l l l l l l l l ll ll -l l l l l UT : : : :: :: 99.8 l l l l- -. . _
12 l SS-1D 19 l 8 - l - :: ISO :: l LIMITED UT68 FROM THE HEAD SIDE DUE -l RT/MT l
!C-A : S7 l45 : I: 8 188 :: 188 :: 110 PR0!!MITY OF NELDED LUGS. i :
lC1.20 i FIGURE NO. B-SG-1 l45T 0 8: 188 :: 188 :: : : :
lVOL : l68 : Il 1l 99 l 99.5 :: : : :
l SHELL-TO-HEAD l60T 1 i 100 :: 188 :: : : :
- : : : : : ll : l l l l l UT ! l l :: : 99.9 l l l
- .. = =:
. . ATTACHMENT '/
ST HL-AE- /f3'7 PAGE J4 OF Sn SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 38 ASME SECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: RESEhERAT!YE HEAT EICHANGER l CLASS 2) l l- LINE NO./ SUBASSEMBLY : l : l l CLASS l- NELD IDENTIFICATION : : I COVERAGE : : :
- CATEGORY :- NELD ID FIGURE : : : :
!! TEM NO. l- HELD CONFIGURATION : EIAM !! DIR: 2 : EFF.!: l l FABRICATION :
!EI. RQMT l- EIAMihATION METHOD l TYPE lN0hE l0MLY : DIR ll COV. : TOTAL LIMITATION : hDE :
- ========23 ::::::::::============================================== m s . :::::::============ 33:
l2 : CSAHRG-1A 8 : 8 -
l - ll 180 ll l LIMITED UT45 AhD UT45T FROM THE : RT l lC-B : 51 l45 : 8: 8: 92 !! 92 ll !N0ZZLE SIDE DUE TO PRDIIMITY OF : l lC2,21 : FIGURE h0. B-RGI-! !45T : 8: 8: 92 ll 92 l!- -l BRANCH CONNECTION. NO UT45 OR UT45T: :
lVOL/ SURF : : l l l :: ll 95 lFROM THE TUBE SHEET SIDE DUE TO TUBE l l l ! h0ZZLE-TO-TUBE SHEET l ---- l ---- l ll----::-------l SHEET C0hF16URAT10N. l l l l l l : ll l l l l l UT/PT PT l 8l -
l - !! - ll 108 l l
- l. .. :. . _._
l2 : CSAHRG-1A !8 l 8l - l -
ll 188 ll l LIMITED UT45 AND UT45T FROM THE : RT :
lC-B : SB l45 : 7 8: 93 :: 93 :: IN0ZZLE SIDE DUE TO PR0llMITY OF : :
- C2.21 : FIGURE NO. B-RGI-l 145T l 7l 8l 93 ll 93 : - l BRANCH C0hMECT!0N. NO UT45 CR UT45T: l lVOL/ SURF : : ,
l ll :: 95 lFROM THE TUBE SHEET SIDE DUE TO TUBE: :
- TUBE SHEET-TO-N0llLE :------! - : ---- l ----- : ----- ! : - =l SHEET CONFIGURATION. ! :
l l l l l ll !! :
l l UT/PT lPT 8: - - :: - ll 188 l l l l2 : CSAHRS-1A l8 8 - l - ll ISO :: l LIMITED UT45 FROM THE N0ZZLE SIDE : RT IC-B . 59 l45 : 9l 16 : 75 :: 83 ll lDUE TO N0ZILE CONFIGUPATION. l l lC2.21 l FIGURE h0. B-RGI-! !45T l 77 : 8 23 :: 23 : -------l LIMITED UT45T ON THE HELD DUE TO l l
!VOL/ SURF l l l l l :: :: 69 lNELD CONFIBURATION. :
- : N0ZZLE-TO-SHELL :- ! -: l l -----ll l l l l l l l l :: :: : : :
l l UT/PT lPT l 8: - l - : - :: 188 , l l
- . p -:
2 l CSAHRG-IA l8 8 - l - :: 188 ll l LIMITED UT45 FROM THE N0ZZLE SIDE : RT l lC-B l slo l45 : 6: 14 l 60 ll 87 ll lDUE TO N0ZZLE C0hFIGURAT10N. :
- C2.21 : FIGURE NO. B-RBI-l l45T l 188 8: 8 ll 8 l l -- th0 UT45T CN THE NELD DUE TO WELD l l lv0L/ SURF : ! ! : : : :: 62 l CONFIGURATION. !
- : SHELL-TO-N0ZZLE : : : :----: : ll l l
- : l l l ll :: : l l l l UT/PT PT l 8l - l - ll - ll 188 : :
l -l
. - ATTACHMENT t/
ST HL AE-llM PAGE 15 OF 5D SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STAi!0N, UNIT 1 PAGE 31 ASME SECTION II CODE COVERAGE LIMITATIONS SYSTEM: RESIDUAL HEAT REMOVAL HEAT EXCHAN6ER 1A (CLASS 2)
- - LINE NO./ SUBASSEMBLY : f
. : CLASS !- HELD IDENTIFICAi!0N : 1 COVERAGE l l lCATE6ORY - HELD 1D FIGURE : l l l l ltTEM NO. l- WELD CONFIGURATION : EIAM lt DIRl 2 !! EFF. : l lFABRICAi!0N l lEI. RQMT l- EIAMINAi!0N METHOD TYPE lNONE l0NLY : DIR 1: COV.ll TOTAL LIMITAi!DN l NDE :
- ====================== ::::::::======================================================= 33 :::::
l2 : RHAHRS-1A l0 l 0! - l - !! 100 :: lNO UT45 AND UT60 FROM THE FLAN 6E : RT C-A l S2 !45/60 1 01 39 : 62 :: 81 :: l SIDE DUE TO FLAN 6E CONFIGURATION. :
1C1.10 : FIGURE ND. B-RHI-l l45T 0: O l 100 :: 100 :: : : :
lVOL l l l l l !! ll l l l l l SHELL-TO-FLANGE : : : : :: :: : : :
- : : : : !! !- l l l l l UT l l ! : ll ll 94 l l
!2 : RHAHRS-14 l0 0 -
! - ll 100 :: l LIMITED UT45 FROM BOTH SIDES AND NO l RT
- C-B NA l45 0 59 l 41 !! 71 ll lUT45T DUE TO THE WELD CONFI6URATION.! l 102.21 : FIGURE NO. B-RHI-1 l45T : 100 : 0l 0 ll 0 l- l l l
- VOL/ SURF : l l l ll ll 57 : : :
- h0ZILE-TO-SHELL :------l----- : :: ll l l l l l l l l l :: :: : l l l l UT/PT :PT : 0: - l - :: - ll 100 l l l l___ -:- .
l2 : RHAHRS-1A 10 0 - -
ll 100 !! l LIMITED UT45 FROM BOTH SIDES AND ND : RT l lC-9 l NB l45 : 0l 59 : 41 : 71 ll lUT45T DUE TO THE WELD CONFIGURATION.! l lC2.21 : FIGURE NO. B-RHI-1 145T : 100 l 0 0 :: 0 :: : :
lVOL/ SURF : : : l l ll :: 57 l l l l l SHELL-TO-h0!!LE : = l ---- l l --- l l ----- 1 ------- i :
- : : : l ll ll l l l l l UT/PT :Pi ! 0l - l - ll -
!! 100 l l l
. ATTACHMENT 4 ST HL-AE-is '7 PAGE 360F 0 SOUTH TEXAS FROJECT ELECTRIC 6ENERATING STATION, UNIT I FA6E 32 ASME SECTION Il CODE COVERA 6E LIMITATIONS SYSTEM: RESIDUAL HEAT REMOVAL. HEAT EXCHANSER 1B (CLASS 2)
- - LINE NO./ SUBASSEMBLY : : : : :
! CLASS l- WELD IDENTIFICATION : : 1 COVERA 6E : : !
lCATEBORY - WELD ID FIGURE : : : :
!! TEM NO. l- WELD CONFIGURATION : EIAM i il DIR: 2 :: EFF. : l FABRICATION :
lEI. RQMT l- EIAMINATION METHOD l TYPE lNONE 10NLY : DIR ll C0V. : TOTAL LIMITATION l NDE :
- =======================================================================================:
12 : RHAHRS-1B 18 : I: -
l -
ll 108 :: lNO UT45 AND UT68 FROM THE FLAN 6E : RT l lC-A : S2 l45/68 : 2 36 : 62 :: 80 1: SIDE DUE TO FLANGE CONF 16URAT10N. !
lC1.18 ! FIGURE NO. B-RHI-1 -145T l 8: I: 158 :: lit :: : l l lVOL l l l !! ll l l l
! : SHELL-TO-FLANGE : : : : ll :: : l l l l l l :: ll l l l l l UT l l l l :: : 93 l l l l- -l- -- ---- - - - - - - -
- l --- -
l -~~~ l l2 : RHAHRS-1B l9 : Il - - :: III :: l LIMITED UT45 FROM BOTH SIDES AND NO RT C-B ! NA l45 l 0 61 39 :: 78 li lUT45T DUE TO THE WELD CONF 16URAil0N.: l lC2.21 : FIGURE NO. B-RH1-1 !45T l 188 : 8: 8 ll 0 :: : : :
!VOL/ SURF : l l l l :: :: 57 : : :
- : N0ZZLE-T0-SHELL : ----- l ----- l ----- ----- l l ----- l l ------ : :
- : : : l ll :: : :
l l 'UT/PT lPT l 8l -
l -
- - !! 100 : : :
l2 : RHAHRS-1B l0 : I - l - :: lit :: l LIMITED UT45 FROM BOTH SIDES AND NO RT l lC-B : NB 145 : 9: 61 39 ll 78 :: lUT45T DUE TO THE WELD CONF 16URATICN'.!
lC2.21 : FIGURE NO. B-RHI-1 45T : 180 8: 9: B ::- l l l
!VOL/ SURF : : : : :: ll 57 I l l l SHELL-TO-N0ZZLE -----l--------- : :
l ! !----l l-l l l l ll :: : i UT/PT :PT : 9l -
- 188 : i
- -l I
l l
l
. W
- ATTACHMENT ST HL-RE- S '
LAGE37kg P
SOUTH TEIAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 PAGE 33 ASME SECTION Il CODE COVERAGE LIMITATIONS SYSTEM: RESIDUAL HEAT REMOVAL HEAT EICHAN6ER lt (CLASS 2)
- LINE NO./ SUBASSEMBLY : : : : :
l CLASS l- NELD IDENTIFICATION : : 1 COVERAGE : :
l CATEGORY :- NELD ID FIGURE : : : : :
!! TEM NO. !- NELD CONFIGURATION : EIAM : !! DIR: 2 :: EFF. : l FABRICATION :
lEI. RDMT l- EIAMINATION METHOD : TYPE lNONE 10NLY : DIR : COV. : TOTAL : LIMITATION : NDE :
- en============================================================:
l2 : RHAHRS-!C l0 : I: - -
lC-A : 52 145/68 : 0 37 : 63 :: 82 :: ISIDE DUE TO FLAN 6E CONFIGURATION.
1C1.18 : FIGURE NO. B-RHI-1 145T 8: 8: 100 :: Its :: : : :
VOL : : : : : 1: :: : : :
- : SHELL-TO-FLAN 6E : : : : :: :: : : :
- : : : : : :: ll-- l ': l l
- : ui : : : : :: :: 94 : : :
l2 : RHAHRS-1C 10 : 0l - ! - :: 180 :: ! LIMITED UT45 FROM BOTH SIDES AND NO l RT :
lC-i ! NA l45 : 8: 63 : 37 :: 69 :: lUT45T DUE TO THE NELD CONFIGURATION. :
1C2.21 : FIGURE h0. B-RH1-1 l45T : 100 l 8: 8 :: 8 ::-------: :
!VOL/ SURF : : : : : : :: 56 : !
l ! N0lILE-TO-SHELL : ----- : : : ----:: -
- : UT/PT :PT l I: - l - : - : 100 : : :
- ...:- :_ l_ -:
12 : RHAHRS-1C lI I: - l - :: 100 :: l LIP.lTED UT45 FROM BOTH SIDES AND NO RT :
IC-B NB l45 : I: 63 : 37 :: 69 :: !UT45T DUE TO THE NELD CONFIGURATION.! :
- C2.21 : FIGURE NO. B-RHI-1 145T 1H : I 8 :: O !!- l l l lVOL/ SURF : : : : : :: :: 56 : : :
- : SHELL-TO-N0ZZLE : : : 1: : : ----- : :
- UT/PT :PT : 8l - - :: - :: IBO : :
- ATTACHMENT 4 ST-HL AE 183')
PAGE 38OF 50 SOUTH TEIAS PROJECT ELECTRIC 6ENERATIN6. STATION, UNIT I PAGE 34 ASME SECTION !! CODE COVERA 6E LIMITATIONS SYSTEM: EICESS LETDONN HEAT EXCHANGER 1A (CLASS 21 l l- LINE NO./ SUBASSEMBLY : l ! ! !
l CLASS l- NELD IDENTIFICATION : I COVERASE : .: :
CATEGORY :- NELD ID FIGURE l - ------ l l l
!! TEM NO. l- NELD CONFIGURATION : EXAM !! DIR: 2 :: EFF. : l- lFABRICATIDN !
lEI. RQMT l- EXAMINATION METHOD l TYPE lNONE 10NLY : DIR :: COV. : TOTAL l LIMITATION NDE :
- ======================================================================================================================l-
!2 : CSAHEL-1A l0 l 9 - l - ' 188 : l LIMITED UT45 AND UT68 FROM THE HEAD RT C-A 51 l45/68 l 0: 13 l 87 :. 94 :: S!DE DUE TO HEAD CONFIBURATION.
IC1.10 : FIGURE NO. B-RHI-1 l45T l 8l 0 l 10e :: 100 ll lNO UT45 AND UT68 FROM THE FLAN 6E : l lVOL l l l l l ll ll l SIDE DUE PR011MITY OF FLANGE : :
- SHELL(HEADI-TO-FLAN 6E : : : : :: ll lBOLilNG. l i
- ! ! ! ! ll ll l l l
! l UT : l l l ll ll 98 l l l
ATTACHMENT 4 ST HL RE Ily)/
PAGE,J4 OF So SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STAT 10N, UNIT 1 PAGE 35 ASME SECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: REACTOR COOLANT FILTER 1A (CLASS 2)
! :- LINE NO./ SUBASSEMBLY : : : l l l CLASS l- WELD IDENTIFICATION : : I COVERAGE : : :
l CATEGORY - WELD ID FIGURE : : -- l l l l ITEM NO. l- WELD CONFIGURATION : EIAM l !! DIR: 2 ll EFF. : : FABRICATION :
lEI. RQMT l- EIAMINATION METHOD : TYPE lNONE 10NLY : DIR ll COV. : TOTAL l LIMITATION : NDE :
!============================================================================================================================l l2 : CSFLRC-1A l0 l 9l -
l - ll 100 ll l LIMITED UT45 AND UT45T FROM BOTH l PT l lC-A : St 45/68 76 l 2l 22 ll 23 :: SIDESDUETONELDEDSUPPORTLE6S.
!C1.10 : FIGURE NO. B-RCF-1 l45T : 76 : 8! 24 :: 24 ll l LIMITED UT45 FROM THE INLET SIDE DUE: :
VOL : : : : : :: TO PR011MITY OF BRANCH CONNECTION. :
- : INLET-TO-SHELL : l ll :: ! LIMITED UT45 FROM THE SHELL SIDE DUE: :
- : : : : l ll :- ITO PR011MITY OF OUTLET N0ZZLE. : :
- : UT l l l l :: :: 49 : : :
12 : CSFLRC-!A lE 8: - l - : ISO :: ! LIMITED UT45 AND UT45T FRCM THE HEAD: PT lC-A : S2 l45/6E : 62 : 9 29 :: 34 :: l SIDE DUE TO PROIIMITY OF CLOSURE :
lC1.14 : FIGURE NO. B-RCF-1 l45T : 44 9: 56 :: 56 :: BRACKETS AND HEAD CONFIGURATION. ! l lVOL . ! l l :: :: l LIMITED UT45 FROM THE SHELL SIDE DUE: :
- SHELL-TO-HEAD : l l l :: ll lTO PR011MITY OF NAME PLATES. l l l l l l l l :: ll l l l l l UT : : : :: ll 63 : ! l l --
SYSTEM: REACTOR COOLANT FILTER 1B (CLASS 2)
!- LINE N0./ SUBASSEMBLY : : : l l l CLASS l- WELD IDENTIFICATION : : I COVERAGE :. :
CATES 0RY l- WELD ID FIGURE : :==- ! l l
! TEM NO. - WELD CONF 16URAT10N : EIAM l1 DIR: 2 :: EFF.1: IFABRICATICN :
EI. RQMT l- EIARINATION METHOD l TYPE IN0NE l0NLY : DIR :: COV.: TOTAL LIMITATION : NDE .
l============================================================= ==============================================================l 2 : CSFLRC-1B 18 : 9l - ! - :: 100 ll l LIMITED UT45 AND UT45T FROM BOTH : PT l
!C-A : St l45/64 : 76 l 2 22 : 23 :: SIDES DUE TO WELDID SUPPORT LE65. : :
lC1.10 : FIGURE NO. B-RCF-1 145T l 76 : 0l 24 ll 24 !l l LIMITED UT45 FROM TliE INLET SIDE DUE: :
VOL : l l :: :: 1T0 PRD11MITY OF BRANCH CONNECTION. : :
l INLET-TO-SHELL l l l l :: :: LIMITED UT45 FROM THE SHELL SIDE DUE:
l l l l l l :: :: -lTJ PR011MITY OF OUTLET N0ZZLE. l l l UT l l l l :: ll 49 : : I p -:
l2 : CSFLRC-1B l0 : 8 - l - :: 100 :l l LIMITED UT45 AND UT45T FROM THE HEAD: PT l lC-A : 52 145/6B 62 9l 29 ll 34 :: ISIDE DUE TO PR0!!MITY OF CLOSURE l l lC1.18 : FIGURE N0. B-RCF-1 l45T : 44 : 0l 56 ll 56 :: l BRACKETS AND HEAD CONFIGURATION. l l VOL : : : l :: :: l LIMITED UT45 FROM THE SHELL SIDE DUE: :
- l SHELL-TO-HEAD : : l : ll TO PR011MITY OF NAME PLATES. : :
- l l l l l :: !!- -: : :
- UT l ! : l ll :: 63 l :
-p ,
I ATTACHMENT ST HL AE- 4 Q GEjgo/g39 p5g l
SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 35A l REVISION 2 )
ASME SECTION II CODE COVERAGE LIMITATIONS SYSTEM: FEEDWATER - PIPE LU6S (CLASS 2 PIPIN6)
! :- LINE NO./ SUBASSEMBLY : : : : :
ICLASS l- WELD IDENTIFICAT!0N l l 1 COVERAGE : : :
CATEGORY l- WELD ID FIGURE : l l l l ITEM NO. l- WELD CONFIGURATION EIAM l l1 DIR: 2 ll EFF. l FABRICATION :
!EI. RGMT l- EIAMINATION METHOD TYPE lNONE 10NLY DIR :: COV. l TOTAL : LIMITATION ! NDE :
- r==========================================-- _ --==================----------=---------- =-------------- ===========l
!2 : 18-FW-1829 l8 l 24 l - l - ll 76 ll l LIMITED UT AND MT COVERAGE DUE TO l MT/PT lC-C 1PL1-!PLB 145 ! !! 22 : 77 :: 88 :: !P!PE LUS CONFI6URATION.
IC3.28 ! FIGURE NO. B-FW-1 : : : : ll !: ! :
SURF : l l : :: ll 82 : : :
VOL
- l P!PE LUSS -! ! l l ---41 --- l l l l ! ;
i l l l l l ll ll l l l
! UT/MT lMT l 43 - l - - : 57
- AUS PSI - BEZ l l l l l !
l2 18-FW-II29 l8 : 8: - l - : 188 :: l LIMITED UT COVERAGE DUE TO PIPE LUG l PT :
l iPL9-1PL18 145 l 6i 14 GB ll 87 :: lCONFI6URATION. :
- -- l FIGURE NO. B-FW-1 l l l :: :: : : :
!VOL
- l l l l ll ll ! ! !
PIPE LUGS : l l l ll !! ! ! !
l l l l l l l: :!- ! ! !
l l UT l l l l :: ll 94 l* AUS PSI - BEZ !
12 : 18-FW-1838 18 24 - ! - !! 76 :: l LIMITED UT AND MT COVERAGE DUE TO : MT/PT C-C l iPL1-1PL8 145 l 1 22 77 ll 88 :: : PIPE LU6 CONFIBURATION. l l lC3.28 l FIGURE NO. B-FW-3 : : : :: ll ! ! l l SURF : : : l l ll ll 82 : : :
!VOL
- l PIPE LU6S l ! : ---l ll :: l l l
. ! ! ! ! l l ll :: l l l UT/MT lMT 43 l - l - :: -
ll 57
- AUG PSI - BEZ ! !
l l l l- ! l l2 l 18-FW-1938 !8 : 8: - l - ll 188 ll l LIMITED UT COVERAGE DUE TO PIPE LU6 : PT :
- - iPL9-1PL18 145 6: 14 : 88 :: 87 :: lCONFI6LRATION. l l l- FIGURE NO. B-FW-3 l l l l ll ll l l l IV0L f l l l l ll ll l l l l l PIPE LUBS : l l l !! ll l l l l ! l l ll !! l l l l l UT : : : ll ll 94
- AUS PSI - BEZ :
4 ATTACHMENT 4 ST HL AE /G7 PAGE V/ OF 50 SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 35B REVISION 2 ASME SECTION II CODE COVERA 6E LIMITATIONS SYSTEM: FEEDWATER - PIPE LUSS (CLASS 2 PIPING) l l- LINE NO./ SUBASSEMBLY : : : :
l CLASS l- WELD IDENTIFICATION : : COVERAGE : :
lCATE60RY l- WELD ID FIGURE : l l
!! TEM NO. l- WELD CuNFIGURATION : EIAM i l1 DIR: 2 :: EFF. : IFABRICAT!0N l
!EI. ROMT l- EIAMINATION METHOD TYPE IN0NE 10NLY ! DIR ll COV.!: TOTAL LIMITATION : NDE !
- r=====================================- ==========================================..__;.. m ..i __ . ===========:
12 18-FW-II31 19 l 24 l - l - !! 76 !! l LIMITED UT AND MT COVERAGE DUE TO l MT/PT l lC-C l IPL1-!PLS 145 1 22 : 77 :: BB !! PIPE LU6 CONFIBURATION. ! :
lC3.28 ! FIGURE NO. B-FW-4 : : : l ll :: !
! SURF ! ! : : ll :: 82 : :
lVOL
- l P!PE LU6S l- l l l---l l ll l :
- : UT/MT lMT 43 - l - ll -
ll 57
- AUS PSI - SEZ :
l-- - -
12 18-FW-1831 18 l 9l -
- : 108 :: l LIMITED UT COVERAGE DUE TO PIPE LU6 : PT
- -- l 1FL9-IPL1B 145 6: 14 : 80 ll 87 :: : CONFIGURATION. l l l- l FIGURE NO. B-FW-4 l l l l :: ll l l l lVOL
- l l l l l :: :: : :
! ! P!PE LU6S : : l l !! ll l l l l ! l ll :: !
l l- l 12 18-FW-1932 l9 l 24 l - l - :: 76 ll l LIMITED UT AND MT COVERAGE DUE TO ! MT/PT C-C 1PL1-1PL8 145 : 1l 22 77 :: 88 :: ! PIPE LUG CONFI6URATION. !
lC3.28 : FIGURE NO. B-FN-6 l l l l :: il l l l t
l SURF : l l !! :: 82 l l
!VOL
- l PIPE LUSS : l l- l :: : : : :
- : : : : : ll !! : : :
- : UT/MT lMT l 43 l - - ll - :: 57 :* AUS PSI - bel : :
l -
l l2 18-FW-!I32 lI : 8l -
l - :: W :: l LIMITED UT COVERAGE DUE TO PIPE LUS : PT l IPL9-1PL18 145 l 6: 14 : 89 :: 07 :: ICONFIGURATION. :
! FIGURE NO. B-FW-6 : : : : :: :: l l l lVOL
- l l l l l :: :: : : :
! PIPE LU6S l l : : !! : : :
- ! l l l ll :: 4 : :
ATTACHMENT 4/
ST-HL AE d3?
PAGE @OFSO
. SOUTH TEIAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 36 ASME SECTION II CODE COVERASE LIMITATIONS SYSTEM: MAIN STEAM - LOOP 1 (CLASS 2 PIPIN6) l l- LINE NO./ SUBASSEMBLY : l ! l l CLASS l- WELD IDENTIFICATION : I COVERAGE : : :
lCATE6ORY - WELD ID FIGURE l- l l l ITEM NO. l- WELD CONFIGURATION : EIAM il DIR! 2 ll EFF. l l l FABRICATION lEX. RQMT l- EIAMINATION METHOD TYPE !NONE l0NLY : DIR !! COV. : TOTAL l LIMITATION NDE :
- ================================================================================== :::::::======================:
12 l 38-MS-1981 l8 11 l - l - ll 89 :: INO UT FROM THE VALVE SIDE DUE TO : RT l lC-F : 27 l68 7: 31 l 62 ll 78 : l VALVE CONFIGURATION.
1C5.21 l FIGURE NO. B-MS-2 145T l 11 8 89 :: 89 ll- l l l
- VOL/ SURF : : l l : ll 85 : ! !
- : VALVE-TO-PIPE l------l l !! ll l l
- : l l l l :: !! ! !
- UT/MT lMT ! 8: - ! - ll - : 188 : : :
- - -- l l l -1 12 : 38-MS-II81 l8 l 8l - l - ll 188 :: l LIMITED UT45 AND UT45T DUE TO l RT l lC-F l 27LD l45 l 9l 8l 91 li 91 :: PR0XIMITY OF PERENENT PIPE SUFFORT l l lC5.22 : FIGURE NO. B-MS-2 l45T l 9: 8 91 :: 91 ll- l TORSIONAL RESTRAINT). ! !
!VOL/ SURF ! : : : : :: :: 94 : : :
l ! LONSITUDINAL WELD -----l l-----l ll-----: l LIMITED MT COVERA 6E DUE TO PROIIMITY: :
' : : l l ll ll 10F PERMNENT PIPE SUPPORT : TORSIONAL: t l l UT/MT lMT 9l - l - ll - : 91 l RESTRAINT). ! !
l2 38-MS-1881 l8 : 3l - l - ll 97 ll l LIMITED UT DUE TO PR011MITY OF l RT l lC-F : 28LU 145 : 8l 2l 98 :: 99 ll l PERMANENT PIFE SUPPORT (TORSIONAL : :
lC5.22 : FIGURE NO. B-MS-2 145T : 6l 8: 94 :: 94 l; -l RESTRAINT). l l lVOL/ SURF : l l : :: ll 97 l l l l LONGITUDINAL HELD -
l ---- l -!!- ll l LIMITED MT COVERAGE DUE TO PROIIMITY: l l l l l l l :: ll 10F PERMNENT PIPE SUPPORT ITORSIONAL: l l l UT/MT iMT : 4l - ! - !! - !! 96 l RESTRAINT). l l l- l l l= l l2 l 38-MS-1881 l8 l 8l - l - : 188 :l l LIMITED UT45 AND UT45T DUE TO : RT :
lC-F l 28LD l45 l 47 l 2l 51 :: 52 ll lPROIIMITY OF PERMANENT PIPE SUPPORT l l lC5.22 l FIGURE NO. B-MS-2 145T : 31 : 8 69 :: 69 ll l BENDING RESTRAINT). l l
!VOL/ SURF l l l l ll ll 74 : : :
- LONSITUDINAL WELD l ----- -
l !!- :: LIMITED Mi COVERAGE DUE TO PROIIMITY: l l l l l l : ll l0F PERMANENT PIPE SUPPORT (BENDING ! l
! UT/MT lMT : 47 ll - : 53 RESTRAINT). :
l2 : 38-MS-1981 18 8: : 188 ll l LIMITED UT45 AND UT45T DDE TO l RT :
lC-F l 29LU l45/68 i 69 : 2: 29 :: 38 :: :PROIIMITY OF PERMANENT PIPE SUPPORT l l
- C5.22 : FIGURE NO. B-MS-2 .l45T l 46 8 54 ll 54 ::-- -l BENDING RESTRAINT). :
- VOL/ SURF l l l l l :: ll 61 l l l l l LON6ITUDINAL WELD -: -! ll 1 ------- LIMITED MI COVERAGE DUE TO PR011MITV; :
l l l l : :: :: 10F FERMNENT FIPE SUPPORT IBENDING : :
- UT/MT lMT l 69 l - l - :: - ll 31 l RESTRAINT). l l l -:
1
ATTACHMENT t/
ST-HL AE- 1839
__PAGE 43 0F M SOUTH TEXAS PROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 37 ASME SECT 10N 11 CODE COVERABE LIMITATIONS SYSTEM: MAIN STEAM - LOOP 2 (CLASS 2 PIPIN6)
- l- LINE NO / SUBASSEMBLY : : : : :
CLASS :- NELD IDENTIFICATION l l 1 COVERA 6E : : :
CATE60Ry :- NELD ID FIGURE : l ----
-l l l llTEM NO. l- bELD CONF 16URAT10N EIAM : il DIR: 2 : EFF.1: i l FABRICATION l EX. RQMT l- EIAMINATION METHOD l TYPE lNONE l0NLY : DIR ll C0V.ll TOTAL l LIMITATION : NDE :
- s::::::::===================================================================================================================;
l2 38-MS-1842 19 l 9l - ! - ll 100 : l LIMITED UT45 AND UT45T DUE TO l RT l lC-F : 25LD 145 11 8 89 :: 89 :: :PRDIIMITY OF PERMANENT PIPE SUPPORT :
lC5.22 : FIGURE NO. B-MS-4 145T : 11 : 9l 89 :: 89 :: l TORSIONAL RESTRAINT). :
!VOL/ SURF ! : : : !! :: 93 : : :
- : LON6ITUDINAL NELD :------l- : ---- -:: :: l LIMITED MT COVERA 6E DUE TO PR011MITY: :
- l l l l :: :: l0F PERMANENT PIPE SUPPORT (TORSIONAL: l l l UT/MT lMT 11 l :: - !! 09 l RESTRAINT). l l 12 l 38-MS-III2 l3 l 0l - -
- 108 ll l LIMITED UT45 AND UT45T DUE TO l RT l lC-F l 26LD 145 : 47 2: 51 :: 52 :: :PR011MITY OF PERMANENT PIPE SUPPORT :
105.22 : FIGURE NO. B-MS-4 l45T l 28 : 0l 72 :: 72 :: l BENDING RESTRAINT). :
!VOL/ SURF l : : ll :: 75 : : :
- LON6ITUDINAL NELD l -l l -l ll -l LIMITED MT COVERAGE DUE TO PR0!!MITY: l l l l l l l ll :: l0F PERMANENT PIPE SUPPORT (BENDIN6 l l l UT/MT lMT l 47 ! - - ll - ll 53 l RESTRAINT). l l l l- i l l2 ! 38-MS-IIG2 l0 0l - l - : let l l LIMITED UT45 AND UT45T CUE TO l RT l lC-F : 27LU l45 l 69 2: 29 : 3B :: !PROIIMITY OF PERMANENT P!PE SUFPORT l l lC5.22 : FIGURE NO. B-MS-4 l45T 42 : 8l 58 :: 58 ::- l BENDING RESTRAINT). l l
!VOL/ SURF : : : : : :: :: 63 l l l l l LONSITUDINAL NELD : -l l
-ll -l: -l LIMITED MT COVERA 6E DUE TO PROXIMITY:
l l : : l ll ll 10F PERMANENT PIPE SUPPORT (BENDING l l l : UT/MT lMT l 69 : - l - ll - :: 31 l RESTRAINT). l l j
e
' ATTACHMENT 1]
ST HL i\E- 183')
- .f3GE 44 OF.50 SOUTH TEIAS PROJECT ELECTRIC GENERATING STATION, UNIT 1 PAGE 38 ASME SECTION Il CODE COVERAGE LIMITAil0NS SYSTEM: MAIN STEAM - LOOP 3 (CLASS 2 PIPING) l l- LINE NO./ SUBASSEMBLY l l l l l l CLASS l- WELD IDENTIFICATION : I COVERAGE : :
l CATEGORY - WELD ID FIGURE l l l l l l ITEM NO. l- NELD CONF 160 RAT!0ft : EIAM l1 DIR: 2 ll EFF. l lFABRICAT10N :
lEI. RQMT l- EIAMINATION METHOD l ItPE !NONE 10NLY : DIR :: COV. : TOTAL l LIMITATION MDE l
- =====================================================================================================
l2 30-MS-!I43 lI l 0l - l -
- lit :: l LIMITED UT45 AND UT45T DUE TO l RT l lC-F : 26LD l45 9 2: 89 !! 90 :: lPRDIIMITY OF FERMANENT PIPE SUPPORT :
1C5.22 : FIGURE NO. B-MS-6 145T l 9 8l 91 !! 91 ll - TORSIONAL RESTRAINT). !
!VOL/ SURF : : : : : :: ll 94 : : :
- : LONGITUDINAL NELD :- -l l ---- l :: !!+ l LIMITED MT COVERA 6E DUE TO PROIIMITY: l l l l l : :: ll 10F PERMANENT PIPE SUPPORT ITORSIONAL: :
- UT/MT !MT l 9 - l - ll -
ll 91 lRESTRAINil. l l l- - l l
l2 l 35-MS-1983 l8 : I: - l - :: 188 l l LIMITED UT45 AND UT45T DUE TO RT :
lC-F l 27LD 145 47 : 2 51 i: 52 ll lPR011MITY OF FERMANENT PIPE SUPPORT l l lC5.22 : FI6URE NO. B-MS-6 l45T 28 : I '72 ll 72 : - l BENDING RESTRAINT). : :
VOL/ SURF : l l l ll ll 75 : : :
1 1 LONGITUDINAL WELD 1- - : ---: l LIMITED MT COVERA 6E DUE TO PPOIIMITY: l l 1 l l l l ll :: 10F PERMANENT PIFE SUPPORT (BENDING : :
- UT/MT lMT : 47 l - ! - : - :: 53 l RESTRAINT). : :
l2 l 30-MS-1983 l8 l 8l - - : III :: l LIMITED UT45 AND UT45T DUE TO l RT l lC-F 28LU l45 69 : 2l 29 :: 38 : lPRDIIMITY OF PERMANENT PIPE SUPPORT ! !
105.22 : FIGURE NO. B-MS-6 l45T : 42 : 8 58 :: 58 : l BENDING RESTRAINT). l l IV0L/ SURF : l : l ll :: 63 : l l l : L0N61TUDINAL NELD ------l l !! -: - l LIMITED MT COVERAGE DUE TO FROIIMITf :
- : : : : ll :: 10F PERMANENT PIFE SUPPORT (EENDING :
- UT/MT !MT 69 l - l - - :: 31 l RESTRAINT). :
e ATTACHMENT 4 ST HL AE p;39 PAGE Il50F So SOUTH TEXAS PROJECT ELECTRIC EENEPATING STATION, UNIT 1 PAGE 39 REVIS!0N I ASME EECTION 11 CODE COVERAGE LIMITATIONS SYSTEM: MAIN STEAM - LOOP 4 (CLASS 2 PIPING)
, l l- LINE N0./ SUBASSEMBLY : l l l l CLASS l- NELD IDENTIFICATION : l I COVERA 6E : : :
CATES 0RY :- WELD ID FIGURE : -l l
!! TEM NO. l- WELD CONFIEURATION : EXAM i l1 DIR! 2 :: EFF. : lFAERICATION l El. RCMT l- EIAMINATION METHOD TfPE lNONE l0NLY : DIR :: COV. l TOTAL : LIMITATION l hDE :
- ==================================================&s=====================================================:
- 2 l 38-MS-1884 l3 8l - - ll 138 :: LIMITED UT45 AND UT45T DUE TO TAPER RT l lC-F ! 24LD 145 1 2: 8: 98 :: 98 :: l0N OD SURFACE. l l lC5.22 : FIGURE NO. B-MS-8 l45T : 2: 8 98 :: 98 : -------! ! :
VOL/ SURF : ! ! : :: ll 99 : l l
- LON6ITUDINAL WELD : : - : ----: -----! ! l l l l : : : : :: :: : : l l l UT/MT lMT 8l - ! - :: - :: 188 : : :
- l- -1 -
l l2 1 38-MS-1884 lI l 8: - l - :: 100 :: l LIMITED UT45 AND UT45T DUE TO l RT :
lC-F : 26LD l45 l 9l 2 89 :: 98 !! :PR011MITY OF PERMANENT PIPE SUPPORT l l 105.22 : FIGURE N0. B-MS-8 145T : 9! 8 91 ll 91 :: :(TORSIONAL RESTRAINT). !
l lVOL/ SURF ! ! ! ! ! ll ll 94 l l l l LONSITUDINAL WELD : : : -:: !:-------l LIMITED MT COVERA 6E DUE TO PR0!!MITY: :
- : : l l :: :: 10F PERMANENT PIPE SUPPORT ITORSIONAL:
! ! UT/MT lMT l 9l - l - :: - : 91 l RESTRAINT). :
-- ! -i -:
- 2 38-MS-1384 l8 0l - - ll 188 :: l LIMITED UT45 AND UT45T DUE TO RT :
C-F : 27LD :45 47 l 2: 51 ll 52 ll :PROIIMITY OF PERMANENT PIPE SUPPORT l l lC5.22 : FIGURE NO. B-MS-8 145T : 28 8: 72 :: 72 :: -;(BENDING RESTRAINT). l l VOL/ SURF : : : : ll :: 75 : : :
- l LONSITUDINAL WELD : l l ---- : -----: ------l LIMITED MT COVERAGE DUE TO PROXIMITY: :
- l : : : :: ll 10F PERMANENT PIPE SUPPORT (BENDING l l l UT/MT lMT l 47 l - l - : - 1: 53 l RESTRAINT). ! !
! --; -1 1 -l l2 : !i-MS-1804 l0 : I - l - :: ISO :: l LIMITED UT45 AND UT45T DUE TO RT
- C-F l 28LU 145 l 69 2: 29 :: 38 :: PROXIMITY OF PERMANENT PIPE SUPPORT l l lC5.22 : FIGURE N0. B-MS-8 145T l 42 ! 8: 58 :: 58 ll l(BENDING RESTRAINT). :
lVOL/ SURF l l l l l :: :: 63 l l l l LONGITUDINAL NELD :------ 1 ---l l ---- l l - l LIMITED MT COVERA 6E DUE TO PR011MITY: :
- : : : : : :: ll .0F PERMANENT PIPE SUPPORT (BENDIN6 l l l UT/MT lMT l 69 l - l - :: - ll 31l RESTRAINT). :
- - l- -:
d ATTACHMENT 4 ST-HL AE- ;i3 9 PAGE V60F50 SOUTH TEXAS PROJECT ELECTRIC BENERATING STATION, UNIT 1 PAGE 39A REVISION 2 ASME SECTION II CODE COVERAGE LIMITATIONS SYSTEM: MAIN STEAM - PIPE LU6S l CLASS 2 PIPIN6)
! - LINE NO./ SUBASSEMBLY : ! ! ! :
- CLASS l- WELD IDENTIFICATION : l % COVERAGE l l l lCATE6ORY :- WELD ID FI6URE : : : l
!! TEM NO. l- WELD CONFIGURAT!0N : EIAM : !! DIR: 2 !! EFF.ll l l FABRICATION :
lEI. RQMT l- EIAMINATION METHOD l TYPE lNONE lCNLY : DIR ll COV.!! TOTAL ! LIMITATION : NDE :
- =,=============================....- ,
= ...............:===========.............. ===========l l2 : 38-MS-1981 it : 24 l - l - !! 76 !! l LIMITED UT AND MT COVERAGE DUE TO l MT/PT IC-C l 27PL1-27FL8 l45 : 1l 22 77 :: 69 !! P!PE LUS CONF 16URATION. ! l lC3.20 : FIGURE NO. B-MS-2 : : : : : !! : :
- SURF l l l l l :: !! 82 : l lVOL
- l PIPE LUSS ! ! ! ! : ll l l l l l ! : : ll ll l l l l l UT/MT lMT : 45 l - ! - :: - ll 55
- AUG PSI - BEZ l l l- l --
l2 l 38-MS-1981 19 l 8 8l - ll 198 ll lLlHITED UT COVERAGE DUE TO PIPE LUG l PT l 28PL1-2BPL2 145 6l 14 : BS ll 87 :: CONFIGURATION. l l l FIGURE NO. B-MS-2 l l l l ll l: : :
!VOL
- l l l l ll :: : : :
- l l l l l2 l 38-MS-1982 l9 l 24 l - l - ll 76 :: l LIMITED UT AND MT COVERAGE DUE TO MT/PT l lC-C : 25PL1-25PLB l45 1l 22 : 77 :: 88 ll l PIPE LU6 CONFIGURATION.
1C3.2E l FIGURE NO. B-MS-4 : : : : : :: : : :
SURF l l l : ll ll 82 l l l
!VOL
- l P!PE LUSS : - - - -
! ! -- : ----l ! !
! l l l l l :: ll l l
- : UT/MT lMT l 45 l - - ll - ll 55 l* AUS PSI - BEZ l l 1-- l l l l l2 l 30-MS-It02 19 l 8l - l - ll 180 ll l LIMITED UT COVERAGE DUE TO PIPE LUG l PT l -- l 26PL1-26PL2 145 6l 14 l 80 :: B7 :: ! CONFIGURATION. l l l- l FIGURE NO. B-MS-4 l l l l : ll l lVOL
- l l l l l :: ll l l l l l P!PE LUGS : : : : !! ll l l
- : l l : :: : l l l UT l l l ! ll :: 94
- AUS PSI - BEZ l !
l l
ATTACHMENT ST HL-AE flyJ t/
PAGE 47OF 5o SDUTH TEIAS PROJECT ELECTRIC BENERATING STAT 10N, UNIT 1 PAGE 398 REVISION 2 ASME SECTION 11 CODE COVERA 6E LIMITAil0NS SYSTEM: MAIN STEAM - PIPE LU6S CLASS 2 PIPIN6)
!- LINE NO./ SUBASSEMBLY : l l :
l CLASS l- WELD IDENTIFICAi!CN : I COVERASE : :
lCATE6ORY l- WELD ID F16URE : : : :
!! TEM NO. - WELD CONFIGURATION l EIAM l l1 DIR: 2 i: EFF. : : l FABRICATION l
!EI. RQMT l- EIAMINATION METHOD : TYPE lNONE 10NLY ! DIR : COV.ll TOTAL l LIMITATION l NDE :
- =s===========================================----- _____.======2_____=====================================:
l2 l 30-MS-1803 l8 ! 24 ! - l - : 76 ll l LIMITED UT AND MT COVERAGE DUE TO MT/PT lC-C 26PL1-26PLB l45 1 22 77 :: 88 ll l PIPE LUS CONF 16URAT!0N. :
1C3.28 : FIGURE NO. B-MS-6 : ! l l ll :: I ! l l SURF : : : : : :: :: 82 : :
lVOL * ! PIPE LU63 l------l----- -l :: !! ! l l l : l : : : : : :
! ! UT/MT lMT 45 : - l - : - 55 ln AUS PSI - BEZ :
l l l- !
12 : 30-MS-1883 l9 l 9l - ! - ll 188 ll l LIMITED UT COVERA 6E DUE TO PIPE LUS l PT l l -- l 27PL1-27PL2 145 6 14 : 80 ll 87 :: l CONFIGURATION. l l l FI6URE NO. B-MS-6 : : : l ll ll l l l IVOL
- l l l l l :: ll l l l l PIPE LUSS i : l ll : l l l
! l 1 : : :: :: : l l l UT : l ll ll 94
- AUS PSI - BEZ ! !
! --l- l l l 12 l 30-MS-1984 l9 l 24 l - l - ll 76 ll l LIMITED UT AND MT C0VERA6E DUE TO : MT/PT lC-C : 26PL1-26PL8 !45 : 1l 22 : 77 :: 88 ll l PIPE LU6 CDNFI6URATION. l l 1C3.28 l FIGURE NO. B-MS-8 : l l ll ll l l l l SURF l l l l l :: :: 82 l l l IVOL
- l PIPE LU6S l ----- - l l ll ll l l l l l l l l ! ll :: l ! l
! ! UT/MT lMT 45 : - l - !! - ll 55 l* AUS PSI - BEZ :
- -l ---
! :--- l l2 : 38-MS-1894 l0 : 8: - l - ll lie :: l LIMITED UT COVERASE DUE TO ?!PE LUG l PT l
! -- l 27PL1-27PL2 !45 l 6 14 : 88 :: 87 ll l CONFIGURATION. l l 1 -- l FIGURE NO. B-MS-S : : : ll !! l l l IVOL * ! ! : l l :: ll l l l l l PIPE LUSS : l l l ll ll l l l l l l l l l :: :: : l l l UT l l l l l ll 94 lt AUS PSI - BEZ l l l i
ATTACHMENT 4 r ST HL AE 183?
PAGE 1/f OF50 SOUTH TEIAS PROJECT ELECTRIC GENERATING STATIDN, UNIT 1 FASE 48 REVISION 1 ASME SECTION II CODE CJVERAGE LIMITATIONS SYSTEM: RESIDUAL HEAT REMOVAL (CLASS 2 PIPIN6)
- LINE NO./ SUBASSEMBLY ! ! : !
l CLASS l- WELD IDENTIFICAT10N : ! I COVERAGE : :
l CATEGORY - WELD ID FIGURE l l -
l : l
!! TEM NO. l- WELD CONFIGURATION l EIAM : :1 DIR: 2 !! EFF.!! : IFABRICATIDN :
EI. RQMT l- EIAMINATION METHOD TYPE lNONE CNLY : DIR ll COV.:: TOTAL LIMITAT!0N NLE :
- ======================================================================================================================
l2 : 12-RH-1282 !$ i i: - l - :: 100 :: l LIMITED UT45T FROM THE FLANGE SIDE : RT :
C-F : 4 l45 l 9: I: 180 ll 188 :: lDUE TO FLANGE CCNFIGURATICN. : l lC5.11 l FIGURE NO. B-RH-2 l45T 15 0 64 :: 84 :: : : :
- VOL/ SURF : : : : : :: :: 95 : : :
- ELB0W-TO-FLANGE l-- l----- -----ll-----:: -
- : : : : ll ll l l l l l UT/PT PT Ol - l - :: - : 100 : : :
l- -- -
l -l 12 12-RH-1382 10 9 - l - ll 108 !! l LIMITED PT FROM THE P!PE SIDE DUE T0: RT lC-F l 12 l45 l 8 9 l 1H ll 188 :: :PROIIMITY OF WELDED PLATE. : :
- C5.11 : FIGURE NO. B-RH-3 l45T l 8: 8 l 188 :: 100 ::-- -
!VOL/ SURF : : : : l ll :: 180 : ! :
- : ELBOW-TO-PIPE -
l l l : :: l i
- l l l l ll :: : : :
l l UT/PT lPT l 21 -
l - !! - ll 98 : l l--
-:- l 12 l 12-RH-1383 18 6l - l - ll 94 : l LIMITED UTI AND UT45T FROM THE l RT l lC-F : 8 145 : I I: 100 :: 108 :: N0ZZLE SIDE DUE 10 h0ZZLE : :
lC5.11 : FI6URE NO. B-RH-8 145T 6 8: 94 :: 94 ::- l CONFIGURATION.
lVOL/ SURF : l ! ! l ll :: 96 l l l l PIPE-TO-N0ZZLE : ----- l ----- : ---- ::-----ll l l l l l l l l ll :: l l l l UT/PT :PT l 0l - ! -
- - : 188 : : :
- = l l l l 12 8-RH-1111 18 : 8 - l - :: 100 ll l LIMITED UT45 FROM THE VALVE SIDE DUE: RT C-F ! 5 l45 : 8: 31 69 :: 85 :: lTO VALVE CONFISURATION. l l lC5.21 : FIGURE NO. B-RH-5 145T 8: 3: III ll 100 ll -
lVOL/ SURF ! ! : : :: :: 95 : : :
- : PIPE-TO-VALVE : : .-----l -!!-----!: -: : :
- : : l l ll ll l l l l l UT/PT :PT 0 - l - : - !! 139 : : :
?'
ATTACHMENT 'f ST Hi. AE //3 7 PAGE,f/_10F50 SOUTH TEIAS FROJECT ELECTRIC 6ENERATING STATION, UNIT 1 PAGE 41 REVISION 1 ASME SECTION 11 CODE COVERA 6E LIMITATIONS SYSTEM: SAFETY INJECTION (CLASS 2 PIPING)
- l l- LINE NO./ SUBASSEMBLY l l l l
. l l CLASS l- WELD IDENTIFICATION : : I C0tERAGE l l l l CATEGORY - WELD ID FIGURE : -- -
!! TEM N0. l- WELD CONFIGURATION : EIAM !! DIR: 2 :: EFF. l l IFABRICATION l lEI. RQMT l- EIAMINATION METHOD TYPE lNONE 10NLY : DIR ll i0V.!: TOTAL LIMITATION : NDE l
- ===========================================================================================================================:
l2 l 16-51-1101 l9 : 8 - ! - :: 198 :: lNO UT45 FROM THE VALVE SIDE DUE T0 : RT C-F 5 l45 : 32 : 23 l 45 :: 57 :: VALVE CONF 16URATION. l l 105.11 : FIGURE NO. B-SI-2 l45T l 9: 8: 188 :: 100 :: : l l IVOL/ SURF l l : : :: :: 86 : : :
- : VALVE-TO-PIPE :- - : ---- : ---- l ----- l l ----- 1 ------ : :
l l l l : : :: : :
l l UT/PT lPT l 9 -
- : - ll 100 : :
-l l
l l2 l 16-51-1201 19 l 9l - l - :: 198 ll lNO UT45 FROM THE VALVE SIDE DUE TO ! RT l lC-F : 5 145 : 17 34 49 :: 66 ll : VALVE CONFIGURATION.
105.11 : FIGURE NO. B-SI-3 l45T 9 9 100 !! 108 :: -
lVOL/ SURF : : : : : : ll 89 l l l l l VALVE-TO-FIPE : : l ll :: l ! !
l l l l : : :: : : :
- : UT/PT lPT ! 9l - l - ll - !! 100 l l l t : --
l l -:
12 l 16-SI-1301 l9 : 22 l - l - : 78 :: l LIMITED UT FROM THE BRANCH RT l lC-F : 1 l45 8 18 l 90 ll 95 :: CONNECTION SIDE DUE TO BRANCH 105.11 FIGURE NO. B-SI-4 l45T : 22 9 78 :: 78 !! l CONNECTION CONFIGURATION. l l VOL/ SURF : l l l ll :: 84 l l l l l BRAN. CON.-TO-PIPE : l l l -ll- 1: -l l l l l l : : :: ll l l l l UTIPT lPT l 9l - - :: - :: 100 l l l 12 i 6-SI-1325 !8 : 5l - l - :: 95 :: lNO UT45 AND UT68 FROM THE VALVE SIDE: RT IC-F 11 !45/68 l 8: 14 86 !! 93 :: lDUE TO VALVE CONFIBURATION. LIMITED: l lC5.21 : FIGURE NO. B-SI-19 l45T 5 9 95 ll 95 ::=- lUTI AND UT45T FROM THE VALVE SIDE : :
VOL/ SURF : : : : l ll : 94 :DUE TO VALVE CONFIGURATION. :
l PIPE-TO-VALVE :- l l- -:-----ll- -:: l l
- : : : : : :: ll l l
- : UT/PT lPT l 9l - l - :: - ll 108 l l l l2 l 6-51-1326 l9 : 9l - l - !! 188 :: l LIMITED UT45 AND UT60 FROM THE VALVE: RT C-F : 6 ;45/68 : I: 15 l 85 :: 93 :: l SIDE DUE TO VALVE CONFIGURATION. : :
- C5.21 : FIGURE NO. B-SI-19 145T l 9l 9: 189 ll lie ll-------l l l lVOLISURF l l l l l !! ll 98 l l l l l PIPE-TO-VALVE : -l -l l =- -
l l l l l : : : :: :: l l 1
- UT/PT lPT 9: - l - :: - :: lit l l l l-- - i
, ^
p.
ATTACHMENT t ,
ST HL AE I13!)
S0-Q.E.pl)OF 50 SOUTH TEIAS PROJECT ELECTRIC 6ENERATIN6 STATION, UNIT 1 PA6E 42 REVISION 1 ASME SECTION II CODE COVERA 6E LIMITATIONS SYSTEM: SAFETY INJECTION (CLASS 2 PIPIN6)
-. ! :- LINE NO./ SUBASSEMBLY : l l l l l CLASS l- NELD IDENTIFICATION : 1 1 COVERA 6E : l CATE6ORY l- NELD ID FIGURE l----- l l l ITEM NO. l- WELD CONFIGURATION l EIAM !! DIR: 2 :: EFF. : l l FABRICATION ?
!EI. RQMT l- EIAMINATION PETHOD TYPE th0NE l0NLY : DIR ll COV. l TOTAL l LIMITATION l NDE :
- ===================================================================================:
l2 l 2-SI-1106 !I 1l - - ll 99 :: l LIMITED UT FROM THE PIPE SIDE DOE TO: RT l IC-F-2 *l 15 l45 1l 0 99 !! 99 :: :PR011MITY OF PERMANENT PIPE SUPPORT.:
lC5.61 *l FIGURE NO. B-SI-20 l45T l 1 0 99 :: 99 :: -
- l lVOL/ SURF : : : : : :: ll 99 : ! l l l REDUCER-TO-PIPE :- ---- :: :: :* - FROM 1933 INCLUDING N83 ADDENDA l l l l l l l l :: :: : OF ASME SECTION II. l l l l UT/PT lPT : 0l - l - ll - !! 100 : i J