Text

Unit 2 Refueling 20 Repair/Replacement Summary Rept for Form NIS-2
	ML20078S362
Person / Time
Site:	Point Beach
Issue date:	02/17/1995
From:	; WISCONSIN ELECTRIC POWER CO.
To:	;
Shared Package
ML20078S354	List: ML20078S353; ML20078S357; ML20078S362;
References
	NUDOCS 9502240103
	Download: ML20078S362 (69)
	v • d • e

,

Wisconsin Electric Po rcr Co.

O -s 4 231 West Michigni Avenue Milwaukee, v." $3401 Point Beac'2 Nuclear Plant, Unit 2 6610 Nuclear Road Two Rivers, WI 54241 Docket 50-301 Commercial Service Date 10/01n2 UNIT 2 REFUELING 20 REPAIR / REPLACEMENT

SUMMARY

REPORT FOR FORM NIS-2 Written by: d be- v Date: /!3/ Y Reviewed by Af D Date: /' 3/- 7f Approved by:I /44/ Date: of-/7M 9502240103 950217 PDR ADOCK 05000301 G PDR

m-k

. Wisconsin Electric Power Co.

231 West Michigan Avenue I Milwaukee, WI 53201 '

Point Beach Nuclear Plant, Unit 2 r 6610 Nuclear Road Two Rivers, WI 54241 Docket 50-301

[

Commercial Service D.:te 10/01/72 L Acronyms ASME American Society of Mechanical Engineers !

CR Condition Report MR Modification Request 1

MT Magnetic Panicle Examination l MWR Maintenance Work Request NDE Nondestnictive Examination NRC Nuclear Regulatory Commission l j

PBNP Point Beach Nuclear Plant l

)

r PT Dye Penetrant Examination RT Radiographic Examination RRM Repair / Replacement / Modification l 1

UT Ultrasonic Examination VT Visual Examination WE *" '

Wisconsin Electric Power Company l

PAGE 2 of 8 l

,. g Wisconsin Electne Power Co. f 231 West Michigan Avenue ,

Milwaukee,WI $3201 Point Beach Nuclear Plant. Unit 2 6610 Nuclear Road Two Rivers, WI $4241 Docket 50-301 -

Commercial Service Date 10/01/72 )

Table of Contents ,

1.0 INTRODUCTION

2.0 CODE CASES AND INTERPRETATIONS 3.0 ABSTRACT OF REPAIR / REPLACEMENT i

i l

l s

l l

1 l

)

l l

PAGE 3 of 8

- . - - . _ _ _-- _ _ - - -~ _ --

~ . . . . - - . . - .

' Wisconsin Electric Power Co.

231 West Michigan Avenue Milwaukee, WI 53201 ,

Point Beach Nuclear Plant. Unit 2 6610 Nuclear Road Two Rivers, WI 54241 Docket 50-301 Conunercial service Date '40/01/72 UNIT 2 REFUELING 20 REPAIR / REPLACEMENT

SUMMARY

1.0 INTRODUCTION

From November 16, 1993 to December 1,1994, repairs and replacements were performed on items i at PBNP Unit 2 . These repairs and replacements were completed in the second examination of the ;

first period, of the third 10-year interval at PBNP Unit 2. The time interval for this examination period included the Unit 2 Refueling 20 outage (U2R20) that ran from September 24,1994 to ;

November 1,1994. !

2.0 CODE CASES AND INTERPRETATIONS This report utilized the following Code Cases and Interpretations:

2.1 ASME Code Interpretation, Section VIII-1-83-17, which allows for computer generated data report forms to be used in place of Code forms as long as size, arrangement, and content are identical. ;

3.0 ABSTRACT OF REPAIR / REPLACEMENT 3.1 Repairs / replacements performed on ASME Class 1 and 2 items are documented on the -

attached NIS-2 forms. Repairs / replacements on ASME Class 3 items are documented on NIS-2 forms and maintained on file at PBNP. They are not included in this report in accordance with ASME Section XI, IWA-6210(c).

RRM 93-0051, MWR 926098 COMPONENT: MS-02015, Steam Generator Atmospheric Steam Dump CLASS: 2 DESCRIPTION: Replacement of cage ard trim.

The valve cage locking device was g.ound off, replacement of the trim assembly and cage, and !

rewelding of the locking device.

RRM 93-0064, MWR 935609 COMPONENT: PIPE SI 0151R-08, Safety Injection Full Flow Test Line CLASS: 2 DESCRIPTION: Repaired leaking pipe to sockolet weld.

Ground out and rewelded leaking pipe to sockolet weld.

PAGE 4 of 8

F o 8 Wisconsin Electric Power Co.

231 West Michigan Avenue Milwaukee. WI 53201 Point Beach Nuclear Plant. Unit 2 6610 Nuclear Road Two Rivers. W1 54241 Docket 50-301 Commercial Service Date 10/01/72 RRM 93-0079, MWR 936353,936354, MR 90-261 COMPONENT: SI-00854A, SI-00854B, RWST to RHR Pump Suction Header Check Valve CLASS: 2 DESCRIPTION: Replacement of disk and seat.

The pin weld was ground off, replacement of the disk and seat, and rewelding of the disk pin.

RRM 93-0080, MWR 936111,9409419 COMPONENT: AF-00103, Aux. Feedwater Pump Discharge to Steam Generator Check Valve CLASS: 2 DESCRIPTION: Installation of Kicker assembly.

Original valve did not contain a Kicker assembly. Disassembled valve, replaced bonnet, installed and tack welded Kicker assembly.

RRM 94-0009, MWR 940295,940296,940459,940560 COMPONENT: PIPING EB-09, Feedwater Piping CLASS: 2 DESCRIPTION: Installation of test connections around 4 main feedwater check valves.

RRM 94-0017, MWR 940919 COMPONENT: HS-26, Safety Injection Line Snubber CLASS: 1 DESCRIPTION: Replaced snubber.

Replaced leaking snubber with one from stock.

RRM 94-0018, MWR 940919 COMPONENT: HS-26, Safety Injection Line Snubber CLASS: 2 DESCRIPTION: Replaced snubber piston.

Replaced piston in spare snubber prior to swapout (see RRM 94-0017).

RRM 94-0043, MWR 9401881, MR 91-135 COMPONENT: MS-02015, Steam Generator Atmospheric Steam Dump CLASS: 2 DESCRIPTION: Replaced valve.

Welded in a new valve and added a 3/4" test tap connection.

PAGE 5 of 8 m

p o ' Wisconsin Electric Power Co. 1 231 West Michigan Avenue l Milwaukee, WI 53201 Point Beach Nuclear Plant. Unit 2 6610 Nuclear Road Two Rivers. WI $4241 Docket 50-301 Commercial service Date 10/01n2 RRM 94-0052, MWR 9403323,9404680, MR 89-094A COMPONENT: CS-00466AA, CS-00476AA, Feedwater Check Valves CLASS: 2 DESCRIPTION: Replaced valves.

Replaced second off main feedwater check valves to provide better performance.

RRM 94-0054, MWR 9406642 COMPONENT: P-116, Boric Acid Tank Recirculation Pump CLASS: 2 DESCRIPTION: Replaced studs and nuts for pump casing.

Replaced the pump casing studs and nuts due to reduced cross section from boric acid corrosion.

RRM 94-0055, MWR 936091,9408690 COMPONENT: RC-00430, Pressurizer Power Operated Relief CLASS: 1 DESCRIPTION: Replaced trim assembly and yoke to bonnet bolts.

Replaced trim assembly with one of harder material and replaced the bolts to provide full thread engagement.

RRM 94-0056, MWR 940356 COMPONENT: MS-02016, Steam Generator Atmospheric Steam Dump CLASS: 2 DESCRIPTION: Replaced trim assembly.

Replaced trim assembly to eliminate seat leakage.

RRM 94-0057, MWR 921530 COMPONENT: AF-00105, Aux. Feedwater Pump Discharge to Steam Generator Check Valve CLASS: 2 DESCRIPTION: Replaced bonnet and kicker assembly.

Original bonnet did not include a kicker assembly, bonnet was replaced with one having a kicker (also see RRM 94-0070).

RRM 94-0060, MWR 9409294 COMPONENT: PS SI 1501R-3-H210, Safety Injection Pipe Support CLASS: 2 DESCRIPTION: Tighten loose nut.

Tightehed loose nut found during a scheduled ISI examination.

PAGE 6 of 8 u 1

- - , -. . _~

1 o ' Wisconsin Electric Power Co.

231 West Michigan Avenue Milwaukee, WI 53201 i Point Beach Nuclear Plant, Unit 2 6610 Nuclear Road Two Rivers, WI $4241 Docket 50-301 1

Conunercial service Date 10/01/72 1 RRM 94-0061, MWR 911693 COMPONENT: CV-00244, Demin Outlet Diverter Valve CLASS: 2 DESCRIPTION: Replaced 5 studs.

Replaced 5 corroded studs during gasket replacement.

RRM 94-0062, MWR 9408584,9408585 COMPONENT: HX-001 A, HX-001B, Steam Generators CLASS 1 DESCRIPTION: Perform welded tube plugging.

Installed welded tube plugs in HX-001A only.

RRM 94-0068, MWR 9409373 COMPONENT: PIPE SI 250lR-01, Safety Injection Cold Leg Loop Test Line CLASS: 1 DESCRIPTION: Buffed out undercut and porosity.

Buffed out undercut and porosity found during a scheduled ISI examination.

RRM 94-0070, MWR 9409418 COMPONENT: AF-00105, Aux. Feedwater Pump Discharge to Steam Generator Check Valve CLASS: 2 i DESCRIPTION: Installation of kicker assembly.

Original bonnet did not contain a kicker assembly (also see RRM 94-0057).

RRM 94-0071, MWR 9409467 COMPONENT: HS-22, Pressurizer Spray Line Snubber CLASS: 1 :

DESCRIPTION: Replaced pipe clamp bolt with longer one. !

The pipe clamp bolt was replaced with a longer one to provide full thread engagement.

RRM 94-0072, MWR 9409503 COMPONENT: HX-001B, Steam Generator CLASS: 2 :

DESCRIPTION: Buff out linear indications.

Buffed out fabrication related linear indications on the main steam nozzle adjacent to the nozzle to pipe weld, found during a scheduled ISI examination.

PAGE 7 of 8

' ' ' Wisconsin Electric Power Co.

231 West Michigan Avenue ;

Milwaukee. WI 53201 '

Point Beach Nuclear Plant, Unit 2 6610 Nuclear Road s

Two Rivers. WI 54241 Docket 50-301 Commercial service Date 10/01/72 i

RRM 94-0073, MWR 9409422 COMPONENT: SI-00854B, RWST to RIIR Pump Suction Header Check Valve ;

CLASS: 2 ;

DESCRIPTION: Installed spacers between cover and body.

Installed spacers between valve cover and body to provide better performance.

RRM 94-0074, MWR 936201 COMPONENT: SI-00896B, Safety Injection Pump Suction Valve CLASS: 2 DESCRIPTION: Replaced valve disk.

Replaced valve disk to improve performance.

RRM 94-0075, MWR 9404068 !

COMPONENT: T-070C, Charging Pump Discharge Accumulator !

CLASS: 2 DESCRIPTION: Replaced antiestrusion ring. >

Replaced antiextrusion ring due to cracking. !

RRM 94-0076, MWR 9409620 !

COMPONENT: RC-00435, Pressurizer Safety to Relief Tank 1 CLASS: 1 DESCRIPTION: Replaced valve with one from stock.

Valve replaced due to outage time constraints and required repairs on original valve (also see RRM ,

94-0078). .

RRM 94-0078, MWR 9409620 COMPONENT: RC-00435, Pressurizer Safety to Relief Tank CLASS: 1 i DESCRIPTION: Replaced bolts.

Replaced flange bolts with longer ones to allow for full thread engagement of replaced valve (see RRM 94-0076).

PAGE 8 of 8 I w , -- - , -_ .

y. .. , . . . - - - . . . . . . -- -. .. - - - --

l o i I

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS i As Required by the Provisions of the ASME Code Section XI l 1

1 i

1. Owner Wisconsin Electric Power Company Date 10/10/93 Name 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 926098 Address Repair Organization P.O. No., Job No., etc.

l

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A i Name Authorization No. N/A l 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Main Steam Bechte! E-Spec 6118-M-185

5. (a) Applicable Construction Code 19_ Edition, N/A Addenda, NONE Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stenped Component Manufacturer Serial No. No. Idenufication Built Replacement (Yes or No)

MS-02015 Copes Vulcan - - - - Replacement N

7. Description of Work replace cace and trim on valve MS-02015.

8. Tests Conducted: Hydrostatic O Pneumatic 0 Nominal Operating Pressure a Other O Pressure osi Test Temp. 'F Inservice leak test in accordance with IT-95 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (Eo0030) may be obtained from th: Order Dept., ASME. 345 E. 47th St.. New York. N.Y.10017

O 5 Sheet _2_ of 2 Form NIS-2 Continued

9. Remarks RRM 93-0051 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed baa b f2cn - IS7 ccw d n./o Date ll /3 ,19 ff

[ Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by }{SBil. CO.

of flartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to Dermber 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examit ations and taken corrective measures described in this Owner's Repon in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nr; his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

^

Commissions /0 7J / i M/ W , IM N

/ Irfspector's Signature National Board. State, Province, and Endorsernents Date -lW /S 19 T t - -

l l

~

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/22/94 I Name 231 W. Michican Ave.. Milwaukee. WI $3201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 935609 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Phillins Getschow Type Code Symbol Stamp N/A !

Name Authorization No. N/A l 2860 Glenmore Road. Green Bay. WI 54311 Expiration Date N/A j Address 1 1

4. Identification of System Safety Iniection Westinghouse E-Spec 676262

5. (a) Applicable Construction Code ANSI B31.1 19.67_ Edition, None Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda l

6. Identification of Components Repaired or Replaced and Replacement Components j Repaired, ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Idennfication Built Replacement (Yes or No)

PIPE SI 0151R-08 - - - - - Repaired N I

l 7 fescription of Work Repair leakine pipe to sockolet weld.

S. Tests Conducted: Ilydrostatic 0 Pneumatic 0 Nominal Operating Pressure a Other a Pressure N/A esi Test Temp. N/A *F Inservice leak test per IT-02 and IT-06, and visual.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

I x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030)may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y.10017

E 1

l Sheet 2 of 2 i

Form NIS-2 Continued

9. Remarks RRM 93-0064 Applicable Manufacturtr's Data Reports to be attached i

CERTIFICATE Ol' COMPLIANCE We certify that the statements made in the repon are correct and this repair conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed e M [J<_ s. t _ IJT cco.w Nut Date Ium_ _ /7 . 19 9 [

/ Owner or Owner's Designee. Title #

s CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and emplcyed by HSB11. CO.

of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures :lescribed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or propeny damage or a loss of any kind arising from or connected with this inspection.

! Commissions /0 7 7/ , M' N , 1

/ Inspector's Signature National Board. State. Province, and Endorsements Date AN .Ef 19 W

l ,

I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/10/94 Name J31 W. Michican Ave.. Milwaukee. WI 53201 Sheet I of 2 j Address ;

i

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 936354. 936353. and MR 90-261 Address Repair Organization P.O. No., Job No., etc.

i

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A

'Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date 'N/A l I

Address

4. Identification of System Safety Iniection ;

I Westinghouse E-Spec 676241 i

5. (a) Applicable Construction Code 19_ Edition, N/A Addenda, None Code Case I (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda i

6. Identification of Components Repaired or Replaced and Replacement Components I

Repaired, ASME >

National Replaced. Code !

Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Replacement (Yes !

or No) i S14)0854A Aloyco inc. - - - - Replacement N f 514)0854B Aloyco inc. - - - - Replacement N i

i

7. Description of Work Replace disk assembly. i

8. Tests Conducted: Ilydrostatic O Pneumatic O Nominal Operating Pressure a !

Other O Pressure osi Test Temp. 'F !

Seat leakage test per IT-535.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. ;

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York. N. . 10017 ,

)

f

p Sheet 2 of 2 Form NIS-2 Continued

{

9. Remarks RRM 934K)79 Applicable Manufacturer's Data Reports to be attached l I

CERTIFICATE OF COMPLIANCE f We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacernent l

6 i

Type Code Symbol Stamp N/A l I

f Certificate of Authorization No. Docket 50-301 Expiration Date N/A !

Signed b.a 25 L TJr coe. L A , Date -- /3 , 19 W ;

[ Owner or Owner's Designee. Title # #

f I

. t CERTIFICATE OF INSERVICE INSPECTION !

i I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel l Inspectors and the State or Province of Wisconsin and employed by HSBII. CO. j of_ _ _ _11artford. CT have inspected the components described in this i Owner's Report during the period _fovember 16.1993 to December 1.1994 , and state j that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective j measures described in this Owner's Report in accordance with the requirements of the ASME Code, :

Section XI. I By signing this cenificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

. Commissions /dU/ ,l6I , le <

/~ # Inspector's Signature National Board, State. Province, and Endorsements Date 44. 1997

+

L , . . , - _ . _ -,_ . .._,s .... _mm __ - ._ . _ _ _ _ _ _ _ _ _ _ _ _

I FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/10/94 Name 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 936111. 9409419 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nt. clear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Auxiliary Feedwater Bechtel E-Spec M-081, ASTM-281, GR-D

5. (a) Applicable Construction Code 19_ Edition, N/A Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Replacement (Yes or No)

AF4)0103 Westinghouse List 973 - - - Replac: ment N

7. Description of Work Jnsta!!ation of a Kicker assemNy into the bonnet.

8. Tests Conducted: Hydrostatic 0 Pneumatic O Nominal Operating Pressure a Other O Pressure osi Test Temp. 'F Seat leakage test per IT-295.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(t2/82) This Form (E00030) may be obtained from the Order Dept., ASME. 345 E. 47th St., New York. N.Y.10017 m

l Sheet 2 of 2 ;

f Form NIS-2 Continued

9. Remarks RRM 93-0080 Applicable Manufacturer's Data Reports to be attached l i

i CERTIFICATE OF COMPLIANCE ;

i We certify that the statements made in the report are correct and this replacement conforms to the ,

rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed ,1$ hse Ts f C m,< N lv /- Date ~.u /3 ,19 W

[ Owner or Owner's Designee. Tide CERTIFICATE OF INSERVICE INSPECTION ;

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel i Inspectors and the State or Province of Wisconsin and employed by HSBil. CO. j of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state .

that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective j measures described in this Owner's Report in accordance with the requirements of the ASME Code, !

Section XI. ;

1 By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or ]

implied, concerning the examinations and corrective measures described in this Owner's Report. J Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or l property damage or a loss of any kind arising from or connected with this inspection, j

(*

Commissions /07]/, WE7V, .T N,9

/ ' Inspector's Signature National Board. State, Province, and Lxiorsements Date A^ 19 ff

= - -

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 11/23/94 Name 231 W. Michigan Ave.. Milwaukee. WI 53201 Sheet I of 2 Address i

2. Plant Point Beach Nuclear Plant Unit 2 Name >

6610 Nuclear Road. Two Rivers. WI 54241 MWR940295. 940296. 940459. 940460 l Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Phillips Getschow Type Code Symbol Stamp N/A [

Name Authorhation No. N/A >

2860 Glenmore Road. Green Bay. WI 54311 Expiration Date N/A Address v

4. Identification of System Feedwater Bechtel E-Spec M-078

5. (a) Applicable Construction Code B31.1 19_81 Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda l

6. Identification of Co:aponents Repaired or Replaced and Replacement Components Repaired, ASME National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Compinent Manufacturer Serial No. No. Idenufication Built Replacement (Yes {

or No) ,

I PIPING EB49 - - - - - Replaced N I

I

7. Description of Work Installation of a test connection around valves CS-00466AA. '66BB. 476AA. 476BB. j i

8. Tests Conducted: Ilydrostatic O Pneumatic 0 Nominal Operating Pressure a l Other O Pressure osi Test Temp. 'F i inservice leak test Per OI-2A and OI-2B, 1 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. I x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York. N.Y.10017 I

I

+

]

l l

1 Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0009. Relief from hydrostatic test reauirements per Relief Reauest PTP-03-04.

Applicable Manufacturer's Data Reports to be anached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replaced conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed / A - (( [ha I'51" Coo owarca_ DateI-c2m /7 ,19 Y

[ Owner or Owner's Designee. Title CERTIFICATE OF LNSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CO.

of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/

5 Commissions /0YJl WT7V, U sA Inspector's Signature National Board, State. Province, and Endorsernents Date dd 8 19

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 03/11/94 Name 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 940919 Address Repair Organizanon P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Safety iniection

5. (a) Applicable Construction Code B31.1

19 62. Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Idenufication Built Replacement (Yes or No) 115-26 Grinncil 41752 - - - Replaced N

7. Description of Work Replace snubber with one from stock.

8. Tests Conducted: Hydrostatic 0 Pneumatic O Nominal Operating Pressure O Other a Pressure N/A psi Test Temp. N/A 'F Functional test per RMP-61.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030)may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.100t7 L

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0017 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COSIPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed I 757' Cco /4/- Dat -L

/3 ,19 ff'

[ Owner or Owner's Designee. Tide CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of _ Wisconsin and employed by HSBil. CO.

of liartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Fur:hcrmore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or o loss of any kind arising from or connected with this inspection.

- Commissions 88/ , @ N [Me !

/ Inspector's Signature Natwnal Board. State. Province, and Endorsemems Date ^^ / 7 19ff l

- 1

4 i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ,

As Required by the Provisions of the ASME Code Section XI :

i

1. Owner Wisconsin Electric Power Company Date 03/11/94 Name i 231 W. Michiran Ave.. Milwaukee. WI 53201 Sheet 1 of 2 ;

Address j

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 940919 i I

Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. W1 54241 Expiration Date N/A Address

4. Identification of System Safety Iniection R

5. (a) Applicable Construction Code B31.1 19_6L Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda ,

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME ,

National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identificanon Built Replacement (Yes or No) ,

i 115-26 Grinnell 41752 - - - Replacement N :

i I

r I

7. Description of Work Replace snubber piston. ,

8. Tests Conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure O [

Other a Pressure osi Test Temp. *F '

Functional test per RMP-61.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 3 a in. >

x 11 in., (2) information in items 1 through 6 on this repo-t is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this fornt (12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E 47th St., New York, N.Y.10017 l

w--

f Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0018 Applicable Manufacturer's Data Reports to be anached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed [m_ f5 [ h RT ( m 2 . _,'/c - Date w s _. U , 19 ff

[ Owner or Owner's Designee. Titic CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National %ard of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CO.

of Hartford. CT have inspected the components described in this Owner's Repon during the period November 16.1993 to December 1.1994 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injuly or property damage or a loss of any kind arising from or connected with this inspection.

/ Commissions /0?]/ , LUIW i NA

/~ / nspec'tcr's I Signature National Board. State. Province, and Endorsements Date AA1. /7 19 Y

7 . -. . . . . .

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ,

As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/28/94 Name l

231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 ,

Address

2. Plant Point Beach Nuclear Plant Unit 2 Name l 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9401881 and MR 91-135 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A ;

Address

4. Identification of System Main Steam ;

Bechtel E-Spec 6118-M-185 !

5. (a) Applicable Construction Code 19._ Edition, N/A Addenda, None Code Case I (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME National Replaced, Code j Name of Name of Manufacturer Board Other Year or Stamped ,

Component Manufacturer Serial No. No. Identification Built Replacement (Yes i or No)

MS-020t5 Copes Vulcan - - - - Replaced N i

[

i

7. Description of Work Replace Valve.

8. Tests Conducted: Ilydrostatic a Pneumatic 0 Nominal Operating Pressure O Other a Pressure N/A osi Test Temp. N/A *F i MT NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in l 4

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is i numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Orde Dept.. ASME 345 E. 47th St., New York, N.Y.10017 i

L

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0043 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the A1ME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed. I

I.fr CouMa d. - Date I.uu.x.- /J ,19 7 ~

[ Owner or Owner's Designee, Title [

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel j Inspectors and the State or Province of Wisconsin and employed by HSBil. CO. ;

of liartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or I l

implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury er property damage or a loss of any kind arising from or connected with this inspection.

/ Commissions /8U/

i M' # MJ i

/' I'nspector's Signature Nanonal Board, State. Province, and Endorsements l Date 4 /7 1997

- ~~ -

{.m . ,,

. , 1 i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPI,ACEMENTS !

As Required by the Provisions of the ASME Code Section XI i i

1. Owner Wisconsin Electric Power Company Date 11/04/94 ;

Name ;

i 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address i

2. Plant Point Beach Nuclear Plant Unit 2 l Name .

6610 Nuclear Road. Two Rivers. WI 54241 MWR 9403323. 9404680 and MR 89-094 A Address Repair Organization P.O. Nc.. Job No., etc.

3. Work Preformed By Phillips Getchow. Type Code Symbol Stamp N/A Name Authorization No. N/A j 2680 Glenmore Road. Green Bay. WI 54311 Expiration Date N/A '

+

Address

4. Identification of System Feedwater ;

i Bectel E-Spec M-078 and M-081

5. (a) Applicable Construction Code B31.1 19,62. Edition, No Addenda, None Code Case ;

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda i

6. Identification of Components Repaired or Replaced and Replacement Components i

Repaired. ASME National Replaced, Code i Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Replacement (Yes l or No) l CS@466AA - - - - -

Replaced N ,

CS.00476AA - - - - -

Replaced N ,

t i

i i

l I

7. Description of Work Replace valves. l

8. Tests Conducted: Hydrostatic O Pneumatic 0 Nominal Operating Pressure a

{

Other u Pressure N/A nsi Test Temp. N/A 'F '

Inservice leak test per OI-2A and OI-2B, UT, MT NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. -

x 11 in., (2) information in items I through 6 on this repon is included on each sheet, and (3) each sheet is I numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y.10017 i

s

?

N- . _ _ _ - _ - - . . _ . -

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0052, inservice leak test in lieu of hydrostatic test per Relief Reauest PTP-3-03.

Applic.ble Manufacturer's Data Repons to be attached i

CERTIFICATE OF COMPLIANCE l

We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A l

l Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed . . 8 $n Tsr con vis a re <L Date

.m- /7 19 W Owner or Owner's Designee. Title l

CERTIFICATE OF INSERVICE INSPECTION l I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CO.

of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, ,

Section XI. )

I By signing this certificate neither the Inspector not his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or propeny damage or a loss o y kind arising from or connected with this inspection.

Commissions /d73/ i It/I 7f, I, i M

/~ In'spector's Signature National Board. State. Province, and Endorsements Date < AO .

199 7 1 I

I l

.-__---___-__i

, -.~.. . .

[

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 09/22/94 Name 231 W. Michigan Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9406642 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Chemical Volume and Control ASTM A193 GR. B-7, ASTM A194 GR. 2-H

5. (a) Applicab!c Construction Code 19_ Edition, N/A Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Idennfication Built Replacement (Yes or No)

P-116 IngersollRand 0171-8033 - - - Replacement N .

7. Description of Work Ferlace studs and nuts for numo casine. ,

8. Tests Conducted: Hydrostatic 0 Pneumatic O Nominal Operating Pressure u l

Other O Pressure usi Test Ternp. 'F ,

i NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is !

numbered and the number of sheets is recorded at the top of this form.

(12/82) nis Form (E00030) may be obtained from the Order Dept., ASME. 345 E. 47th St.. New York, N.Y.10017 )

i k

.. ,.,.4. - m._ m..> .

i Sheet 2 of 2 l t

Form NIS-2 Continued ;

i

9. Remarks RRM 94-0054 Applicable Manufacturer's Data Repons to be attached 4

[

i

(

CERTIFICATE OF COMPLIANCE ;

We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement i Type Code Symbol Stamp N/A }

r Certificate of Authorization No. Docket 50-301 Expiration Date N/A I w T5J (oord 4.- Date I 'e LT . 19 6 l Sig[ned ~ owner or owner's Designee, Title /

l CERTIFICATE OF INSERVICE INSPECTION l I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel ;

inspectors and the State or Province of Wisconsin and employed by HSBII. CO. j of liartford. Cr have inspected the comnonents described in this !

Owner's Report during the period November 16.1993 to December 1.1994 _ . and state !

that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective !

measures described in this Owner's Report in accordance with the requirements of the ASME Code, l Section XI. !

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or !

implied, concerning the examinations and corrective measures described in this Owner's Report.

f Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or !

property damage or a loss of any kind arising from or connected with this inspection.

(

Commissions /67J/, AT / MN Inspector's Signature National Board. State. Provmee, and Endorsements

/ i Date t 4^/ M 19 I 1

i

?

f r

- . ~_. . ~ . . ..a 1 i

l i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l As Required by the Provisions of the ASME Code Section XI

1. Owner Wiaconsin Electric Power Comtsany Date 10/10/94 Name 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241_ MWR 936091. 9408690 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Reactor Coolant Westinghouse E-Spec 676270 l

S. (a) Applicable Construction Code 19_, Edition, N/A Addenda, None Code Case '

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. tdennfication Built Replacement O'es or No)

RC-00430 Copes Vulcan - - - - Replacement N i

7. Description of Work Reolace trim assembly and voke to bonnet bolts.

i

8. Tests Conducted: Hydrostatic O Pneumatic O Nominal Operating Pressure a Other O Pressure psi Test Temp. *F Per IT-205 and IT-235 ,

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. !

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. ;

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME. 345 E. 47th St.. New York. N.Y.10017 i

- ~ , -

F Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0055 Applicable Manufacturer's Data Reports to te attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this seplacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certi6cate of Authorization No. Docket 50-301 Expiration Date N/A Signed d rb _ T.s I Aw2 $ /-- Date

[

om

/3 19 Y

[ Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INCPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBil. CO.

of 11anford CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certincate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury er property damage or a loss of any kind arising from or connected with this inspection.

/ Commissions 272/ ,16Wo D0

/ lbspector's Signature Natenal Board. State. Province. and Endorsements Date bMA) [7 199 7

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/15/94 Name 231 W. Michinan Ave.. Milwau'ge. WI $3201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 940356 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivert WI $4241 Expiration Date N/A Address

4. Identification of System Main Steam Bechtel E-Spec 6118-M-185

5. (a) Applicable Construction Code 19._ Edition, N/A Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Reptacement (Yes or No)

MS42016 Copes Vulcan - - - - Replacement N f I

E i

i I

7. Description of Work Replace trim assembly.

S. Tests Conducted: Ilydrostatic O Pneumatic 0 Nominal Operating Pressure s l Other O Pressure osi Test Temp. 'F l Per IT-95 !

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x !I in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(t2/82) This Form (E00030) may t e obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y.10017

. o I j.

l Sheet 2 of 2 i Form NIS-2 Continued

9. Remarks RRM 94-0056 Applicable Manufacturer's Data Reports to be attached i

i CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this retilacement conforms to the f rules of the ASME Code,Section XI, repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A ,

Signed b lh 13Z' %dal 4' Date sw

/3 19 W

[ Owner or Owner's Designee, Title 8 s

-. n I

CERTIFICATE OF INSERVICE INSPECTION

]

1, the undersigned, holding a valid conunission issued by the National Board of Boiler and Pressure Vessel i Inspectors and the State or Province of Wisconsin and employed by HSBil. CO. [

of flartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state !

that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective !

measures described in this Owner's Report in accordance with the requirements of the ASME Code, i Section XI. l r

By signing this certificate neither the Inspectr'r nor his employer makes any warranty, expressed or i implied, concerning the examinations and corrective measures described in this Owner's Report, Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of y kind arising from or connected with this inspection, l f Commissions /073l . WT/$'r 5$A

/~ Ins /ector's Signature National Board, State, Province, and Endorsernents Date ^# 19 W i

l

( - ,

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/31/94 Name .

1 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 921530. 9409418 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Auxiliary Feedwater l Bechtel E-Spec M-81, A281 GRB

5. (a) Applicable Construction Code 19_ Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Starnped Component Manufacturer Serial No. No. Idenufication Built Replacement (Yes I

or No)

AF-00105 - -- - - - Replacement N l

l l

I

7. Description of Work Replace bonnet and kicker assembly.

8. Tests Conducted: Hydrostatic a Pneumatic O Nominal Operating Pressure O Other O Pressure esi Test. Temp. 'F Hydrostatic test per IT-295. ,

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is S'/. m. l x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept.. ASME. 345 E. 47th St., New York, N.Y.10017 1

l

r. ....s.

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0057. 94-0070 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacernent Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed 25 75u ISr rectrw .+ mn Date / ZT TA~~ , 19

[ Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CO.

of Hartford. CT have inspected the components described in this ,

Owner's Report during the period November 16.1993 to December 1.1994 . and state I that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective l measures described in this Owner's Repon in accordance with the requirements of the ASME Code, ;

Section XI. i By signing this cenificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the exaininations and corrective measures described in this Owner's Report.

Furthermore, neither the inspector nor his employer shall be liable in any manner far any personal injury or l property damage or a loss of any kind arising from or connected with this inspection. l

_ Commissions /077/ / NW,

/' tn/pector's' Signature National Board, State, Province, and Endorsernents Date 4M- 19

t FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS i As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date - 10/30/94 Name l 231 W. Michigan Ave.. Milwaukee, WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 JfWR 9409294 Address Repair Organization P.O. No., Job No.. etc.

3. Work Preformed By Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Safety Iniection

5. (a) Applicable Construction Code AlSC 6th ed._19_. Edition,_ No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements _1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME 1 National Replaced, Name of Na'ne of Code Manufacturer Board Other Year Component or Stamped Manufacturer Serial No. No. Identification Built Replacement (Yes or No)

PS SI 1501R-3-Ill10 -

Repaired N

7. Description of Work Tichten loose nut,

8. Tests Conducted: Ilydrostatic O Pneumatic 0 Nominal Operating Pressure O i Other a Pressure N/A esi Test Temp. N/A "F VT-3 NOTE:

Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) his Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York. N.Y.10017

~ _ ___ _

I Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0060 Applicable Manufacturer's Data Reports to be attached l

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the ASME Code,Section XI. repair or replacernent Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed b ke, JH CoeRomsnu Date A.~m /7 , 19 W

Owner or Owner's Designee. Title [ #

CERTIFICATE OF INSERVICE INSPECTION j I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel :

Inspectors and the State or Province of Wisconsin and employed by HSBil. CO. !

of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken ecIrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Irspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a lo s of any kind arising from or connected with this inspection.

A/ Commissions /078 , N 7I , I I

/ Inspector's Signature National Board. State. Province. and Endorsements Date JA/ 19 YI 1 l

I

r

. . i i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS j As Required by the Provisions of the ASME Code Section XI l

1. Owner Wisconsin Electric Power Company Date 10/21/94 !

Name {

r 231 W. Michiran Ave. Milwaukee. WI 53201 Sheet 1 of 2 Address l

2. Plant Point Beach Nuclear Plant Unit 2 Name ;

6610 Nuclear Road. Two Rivers. WI 54241 MWR 911693 Address Repair Organization P.O. No., Job No., etc. ,

l

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Chemical Volume and Control Westinghouse E-Spec 676270, ASTM A-193, ASTM A-194

5. (a) Applicable Construction Code 19_ Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addqnda

6. Identification of Components Repaired or Replaced and Replacement Components f

Repaired, ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped .

Component Manufacturer Serial No. No. Identification Built Replacement (Yes I or No)

CV-00244 - - - - - Replacement N l

7. Description of Work Replaced 5 studs,

8. Tests Conducted: Ilydrostatic 0 Pneumatic O Nominal Operatmg Pressure a Other O Pressure psi Test Temp. *F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in.', (2) information in items 1 through 6 on this repon is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME. 345 E. 47th St. New York, N.Y.10017 l

I I;

. _ ~

Sheet 2 of ,J_,,

Form NIS-2 Continued

9. Remarks RRM 94-0061 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbc! Stamp N/A i

Certificate of Authorization No. Docket 50-301 Expiration Date N/A <

Signed l )$ $ u IW Cmow4rca Date wA /7 , 19 W

[ Owner or Owner's Designec, Title /

CERTII1CATE OF INSERVICE INSPECTION r

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBil. CO.

of liartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state ,

that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his empk yer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/~

/ k

' Inspector's Signature Commissions /07]l r W/ . ' ? i ZN National Board, State. Province. and Endorsements Date dM N 19 Y l l

l

'/- : C . . M,i,;."

~

e

l f

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS !

As Required by the Provisions of the ASME Code Section XI i

1. Owner Wisconsin Electric Power Company Date 10/16/94 Name I 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 ~

Address

2. Plant Point Beach Nuclear Plant Unit 2 1 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9408584. 9408585 !

Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Westinchouse Electric. Type Code Symbol Stamp N/A }

Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address i

4. Identification of System Reactor Coolant Westinghouse E-Spec 676270, ASTM A-193 ASTM A-194

5. (a) Applicable Construction Code Sect. 111 19 6_1., Edition, No Addenda, None Code Case .

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. winter addenda

6. Identification of Components Repaired or Replaced and Replacement Components i

Repaired, ASME National Replaced, Code !

Name of Name of Manufacturer Board Other Year or Stamped t Component Manufacturer Serial No. No. Ident4fication Built Replacement (Yes I or No) l llX 001 A Westinghouse 16A 6339-1 -

U009974 Repaired Y

l l

1 1

7. Description of Work _ Perform welded tube pluccine on "A" steam cenerator.

8. Tests Conducted: liydrostatic O Pneumatic 0 Nominal Operating Pressure O Other a Pressure 800 nsi Test Temp, ambient *F Per OI-2A NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained fmm the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017

.- a I

I Sheet 2 of 2 i Form NIS-2 Continued

9. Remarks _ERM 94-0062 Apphcable Manufacturtr's Data Reports to be attached i

v.

CERTil'ICATE OF COMPLIANCE We certify that the statements made in the report are correct and this . repair conforms to the rules of the ASME Code,Section XI. repair or replacernent Type Code Symbol Stamp N l

Cenificate of Authorization No. Docket 50-301 Expiration Date N/A Signed / b $ksnr IST (CMOMks Date m

/7 ,19 W

[ Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by 1-151111. C O.

of flartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

Ily signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector not his employer shall be liable in any manner for any personal injury or property damage or a loss of y kind arising from or connected with this inspection.

! Commissions /07]l , WI 7E'. 5-

/ Im;6ctor's Slgnature Natmnal Board. State. Province, and Endorsernents Date v 19[f

. . j i

L FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS j As Required by the Provisions of the ASME Code Sectio : XI 1 Owner Wisconsin Electric Power comoany Date 10/29/94 Name 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address ,

4

2. Plant Point Beach Nuclear Plant Unit 2 [

Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9409373 !

Address Repair Organization P.O. No., Job No., etc.

l

3. Work Preformed By Phillips Getschow Type Code Symbol Stamp N/A J Name Authorization No. N/A l 2860 Glenmore Road. Green Bay. WI 54311 Expiration Date N/A Address t

4. Identification of System Safety Iniection !

Westinghouse E-Spec 676262 ,

5. (a) Applicable Construction Code ANSI B31.1 19,6.7_ 7 Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda !

6. Identification of Components Repaired or Replaced and Replacement Components !

I Repaired, ASME National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped j Component Manufacturer Senal No. No. Idenafication Built Replacement (Yes or No)

PIPE SI 2501R4)! - - - - - Repaired N i

7. Description of Work Duff otr. undercut and porosity.

8. Tests Conducted: Ilydrostatic O Pneumatic 0 Nominal Operating Pressure O Other a Pressure N/A psi Test Temp. N/A "F PT NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is ;

numbered and the number of sheets is recorded at the top of this form.

(12/82) This Form (E00030) may be obtained from the Order Dept., ASME 345 E. 47th St., New York, N.Y.10017 i

_.m. .. ,

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0068 Applicable Manufacturer's Data Reports to be anached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this retiair conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed

[

u.. b$ ISI CMowna Date

/

m- if , 19 W Owner or Owner's Designee. Title CFRTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of Wisconsin and employed by HSBil. CO.

of llartford. CT have inspected the components described in this Owner's Repon during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conneued with this inspection, Commissions /d78/i N Yr b-

/ Inspector's Signature National Board, State, province, and Endorsernents Date 19 ((

. . - u. . . 1

. . \

L FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI j

\

1. Owner Wisconsin Electric Power Company Date 10/31/94 '

Name 231 W. Michiran Ave.. Milwaukee. WI 53201 Sheet 1 of 2 l Address f

2. Plant Poin'. Beach Nuclear Plant Unit 2 !

Name ;

6610 Nuclear Road. Two Rivers. WI S4241 MWR 9409467 I Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A l 6610 Nuclear Road. Two Rivers. WI $4241 Expiration Date N/A h Address t

4. Identification of System Reactor Coolant !

Westinghouse E-Spec G676262 j

5. (a) Applicable Construction Code B31.1 19_6_7_ Edition, No Addenda, None Code Case ,

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components l

Repaired. ASME !

National Replaced. Code Name of Name of Manufacturer floard Other Year or Stamped !

Compcment Manufacturer Serial No. No, Idenafication Built Replacement (Yes e or No) !

HS-22 - - - -- - Replacement N t

i

7. Description of Work Replaced pipe clamp bolt with loncer one.

E. Tests Conducted: Hydrostatic O Pneumatic O Nominal Operating Pressure O [

Other a Pressure usi Test Temp. 'F VT-3 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) *Ihis Form (E00030) may be obtained from the Order Dept., ASME. 345 E. 47th St., New York, N.Y.100t7 I

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0071 Apphcable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We cenify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacernent Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed 8< d/b m TST (cc.ed . Net Date m /P . 19 Y

[ Owner or Owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CO.

of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. !

Furthermore, neither the Inspector nor his employer shall be liable in any marmer for any personal injury or property damage or a loss of kind arising from or connected with this inspection.

Commissions /d8/,[d M

/ Infpector's Signature NationalIbani, State, Province and Endorsements Date , 4t/ 19 Y T -

1 l

l

.c.~.,.,w.

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMFETS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 11/01/W Name 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9409503 Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Phillips Getchow. Type Code Symbol Stamp N/A Name Authorization No. N/A 2860 Glenmore Road. Green Bay. WI 54311 Expiration Date N/A Address

4. Identification of System Main Steam

5. (a) Applicable Construction Code Section III 19E Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacemen Components Repaired, ASME National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Replacement (Yes or No)

IIX-001D Westinghouse 16A.6339-2 - U009975 - Repair Y

7. Description of Work Buff out linear indications. J

8. Tests Conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure O ,

Other a Pressure N/A osi Test Temp. N/A 'F l MT I NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. ,

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is I numbered and the number of sheets is recorded at the top of this form.

(12/82) This IV t EtXX)30) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y.10017 1

a

l I

l l

Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0072 Applicable Manufacturer's Data Repons to be attached l

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed a/w bd /K - 13E Cwro i~.s ra Datekaw '

2r , 19 %

/ Owner or Owner's Designee. Tide #

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Strte or Province of Wisconsin and employed by llSBII. CO.

of flartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 _, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector not his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector not his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

. ./ Commissions /077/, M/7P' _M/I

/ fnspectar's Signature Nanonal Board. State. Province. and Endorsements Date E 19 I

i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI !

t

1. Owner Wisconsin Electric Power Company Date 10/21/94 [

Name !

i 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address t

2. Plant Point Beach Nuclear Plant Unit 2 [

Name l 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9409422 !

Address Repair Organization P.O. No., Job No., etc.

{

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A ;

Name Authorization No. N/A i 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A l Address l

l

4. Identification of System Safety Iniection <

i Westinghouse E-Spec 676241, ANSI B16.5 l S. (a) Applicable Constmetion Code 19 _ Edition, No Addenda, None Code Case !

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components

)

i Repaired. ASME National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Replacement (Yes l or No) j S!4X)854B Aloyco - - - - Replacement N

7. Description of Work Installed spacers between cover and body.

8. Tests Conducted: Ilydrostatic 0 Pneumatic O Nominal Operating Pressure a Other O Pressure nsi Test Temp. 'F Per IT-04 and IT-535.

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12/82) nis Form (E00030) may be obtained fmm the Order Dept., ASME. 345 E. 47th St., New York, N.Y.10017 l

l l

. _ . . _ _ _ _ _ - _ , J

- , _ _ - _ _ = . . .. - - . . - . . - - .- . - . - - . - . . ~.

Sheet 2 of 2 Fo:4n NIS-2 Continued

9. Remarks RRM 94-0073 Applicable Manufacturer's Data Reports to be attached i

l t

i i

I CERTIFICATE OF COMPLIANCE l l'

We cenify that the statements made in the repon are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A i

Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed Ib Jrr N o w fa Date bm.

/ '

M .19 Y r

[ Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION !

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin ,_, and employed by HSBII. CO. ,

of Hanford. CT have inspected the components described in this !

Owner's Report during the period November 16.1993 to December 1.1994 , and state I that to the best of my knowNge and belief, the Owner has performed examinations and taken corrective ,

measures described in this Owner's Repon in accordance with the requirements of the ASME Code, {

Section XI, j By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or !

implied, concerning the examinations and corrective measures described in this Owner's Report. ;

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or ,

property damage or a loss of y kind arising from or connected with this inspection. !

I Commissions /87J/ M/ 7Tf' r I

/ In/pector's Signature National Board, State. Province, and Endorsements }

Date 4A/ 8 19 I

+

l l

i

1 l

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REFLACEMENTS As Required by the Prenisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Compar.v Date 10/30/94 Name 231 W. Michiran Ave.. Milwaukee. WI 53201 Sheet 1 of 2 Address

2. Plant Point Beach Nuclear Plant Unit 2 Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 936201 Address Repair Organization P.O. No., Job No., etc. +

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A Address

4. Identification of System Safety Iniection -

Westinghouse E-Spec 676258

5. (a) Applicable Construction Code B31.1 19.67., Edition, No Addenda, None Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired. ASME National Replaced. Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Identification Built Replacement (Yes or No)

SI-008%B Aloyco 69R511-10 - - - Replacement N ,

7. Description of Work Replaced valve disk.

l

8. Tests Conducted: Ilydrostatic 0 Pneumatic 0 Nominal Operating Pressure a :

Other O Pressure osi Test Temp. 'F l Per IT-45 and IT-525. ;

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in.

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the mtmber of sheets is recorded at the top of this form.

(12/82) 'this Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y.10017

. e Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 94-0074 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF CO5IPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed k a ISI (cacope Tc< Datebm

/ '

-/9 ,19 V

[ owner or owner's Designee. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CO.

of flartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss o any kind arising from or connected with this inspection.

Commissions /073/ , lYll( I* bl< b Inspector's Signature National Board. State. Province, and Endorsements

/

Date A ^> 6 19 Y f

. e FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date 10/31/94 Name j 231 W. Michigan Ave.. Milwaukee. WI 53201 Sheet 1 of 2 :

I Address i

2. Plant Point Beach Nuclear Plant Unit 2 ,

Name 6610 Nuclear Road. Two Rivers. WI 54241 MWR 9404068 i Address Repair Organization P.O. No., Job No., etc.

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A ,

Name Authorization No. N/A l 6610 Nuclear Road. Two Rivers. WI 54241 Expiration Date N/A l Address ,

4. Identification of System Chemical Volume and Control

5. (a) Applicable Construction Code Section III 19 74 Edition, S-76 Addenda, None Code Case ;

(b) Applicable Edition of Section Al Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components Repaired, ASME National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No. No. Idennfication Built Replacement (Yes ;

or No) i T-070C Green - - - -

Replacement N Hydraulics i

7. Description of Work Reolaced antiextrusion rine.

8. Tests Conducted: Hydrostatic e Pneumatic O Nominal Operating Pressure O .

Other O Pressure osi Test Temp. 'F !

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. ,

x 11 in., (2) infonnation in items I through 6 on this report is included on each sheet, and (3) each sheet is l numbered and the number of sheets is recorded at the top of this form. j (12/82) " Itis Form (E00030) may be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y.100t7 l

l l

l

i 8

. e l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS ,

As Required by the Provisions of the ASME Code Section XI {

t

1. Owner Wisconsin Electric Power Company Date 10/31/94 ;

Name j 231 W. Michican Ave.. Milwaukee. WI 53201 Sheet 1 of 2 l i

Address

2. Plant Point Beach Nuclear Plant Unit 2 Name ,

6610 Nuclear Road. Two Rivers. WI 54241 MWR 94096;0 !

Address Repair Organization P.O. No., Job No., etc. j i

3. Work Preformed By Wisconsin Electric Power Co. Type Code Symbol Stamp N/A Name Authorization No. N/A i 6610 Nuclear Road. Two Rivers. WI 54241~ Expiration Date N/A l Address !

4. Identification of System Reactor Coolant ;

i Westinghouse E-Spec 676279 j

5. (a) Applicable Construction Code Section III 19.66, Edition, No Addenda, N-10 Code Case .

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. no addenda

6. Identification of Components Repaired or Replaced and Replacement Components j Repaired. ASME , '

National Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped <

Component Manufacturer Serial No. No. Idennfication Built Replacement (Yes or No)

RC4XM35 Crosby N82732 - - - Replaced Y i

l

[

i

7. Description of Work Replaced valve with one from stock. and replaced bolts with loneer ones, i

8. Tests Conducted: Ilydmstatic O Pneumatic O Nominal Operating Pressure O f Other a Pressure N/A osi Test Temp. N/A 'F ;

Per IT-235 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. :

x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. ;

(12/82) His Form (E0(X)30) may be obtained from the Order Dept., ASME. 345 E. 47th St., New York, N.Y.10017

e o Sheet 2 of 2 Form NIS-2 Continued

9. Remarks RRM 944)076. 94-0078 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacernent Type Code Symbol Stamp NV/NB Certificate of Authorization No. Docket 50-301 Expiration Date N/A Signed $ lb ben $ DZ' foc / o r.v.ne,e Datebmw 25" '

19 V

[ Owner or Owner's Designee, Tide CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBil. CO.

of Hartford. CT have inspected the components described in this Owner's Report during the period November 16.1993 to December 1.1994 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, ;

Section XI. l By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. l Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions M7M F/ T i e 2M

/ inspector's Signature National Board, State, Province, and Endorsements l Date !AN Ff~ 19 ff

ML20078S362

Text

SUMMARY

1.0 INTRODUCTION

SUMMARY

1.0 INTRODUCTION

Navigation menu

Search