ML20154M912

From kanterella
Jump to navigation Jump to search
Unit 1 Refueling 24 Repair/Replacement Summary Rept for Form NIS-2
ML20154M912
Person / Time
Site: Point Beach NextEra Energy icon.png
Issue date: 10/14/1998
From:
WISCONSIN ELECTRIC POWER CO.
To:
Shared Package
ML20154L647 List:
References
NUDOCS 9810210080
Download: ML20154M912 (42)


Text

..

Wisconsin Electr Power Co.

231 West Michigan Avenue Milwtukee, WI 53201 Point Beach Nuclear Plant, Unit i 6610 Nuclear Road Two Rivers WI 54241 Docket 50-266 Commercial Service Date 12/2100 UNIT 1 REFUELING 24 REPAIR / REPLACEMENT

SUMMARY

REPORT FOR FORM NIS-2 Written by: Ob o QNwfo Date: In-N-%

Reviewed by:

, Date: /o ///- 98 Approved by: /

8 s I4t/

Date: /0-/V-f6

(

{ /IXnwaV G zIzu 9810210080 981014 PDR ADOCK 05000266 Page 1 of 6 G

PDR

Wiscomin Electric Power Co.

231 West Michigan Avenue -

Milwaukee, WI 53201 Point Beach Nuclear Plant, Unit i 6610 Nuclear Road Two Rivers, WI 54241 Docket 50-266 Conuncreial Service Date 12/2100 Acronyms ASME American Society of Mechanical Engineers CR Condition Report MR Modification Request MT Magnetic Particle Examination NDE Nondestructive Examination NRC Nuclear Regulatory Commission PBNP Point Beach Nuclear Plant PT Dye Penetrant Examination QCR Quality Condition Report RT Radiographic Examination RRM Repair / Replacement / Modification UT Ultrasonic Examination

-VT Visual Examination WE Wisconsin Electric Power Comp.aly WO '

Maintenance Work Order.

l 1

Y' Page 2 of 6

Wisconsin Electrb Power Co.

231 West Michigan Avenue Milwaukee WI 53201 Point Beach Nuclear Plant, Unit 1 6610 Nuclear Road Two Rivers, WI 54241 Docket 50-266 i

Commercial Service Date 12/21no Table of Contents

1.0 INTRODUCTION

2.0 CODE CASES AND INTERPRETATIONS 3.0 ABSTRACT OF REPAIR / REPLACEMENT i

I l

l Page 3 of 6

Wisconsin Electric Power Co.

231 West Mh:higen Avenue Milwtukee, WI 53201 Point Beach Nuclear Plant. Unit 1 6610 Nuclear Road Two Rivers, WI 5424I i

Docket 50-266 Commercial Service Date 12/21/70 UNIT 1 REFUELING 24 i

REPAIR / REPLACEMENT

SUMMARY

1.0 INTRODUCTION

i From May 10,1996 to July 14,1998, repairs and replacements were performed on items at PBNP Unit 0 l

and Unit 1. These repairs and replacements were completed in the first examination of the third period, of the third 10-year interval at PBNP Unit 1. The time interval for this examination period included the Unit 1 Refueling 24 outage (U1R24) that ran from February 14,1998 to July 4,1998.

2.0 CODE CASES AND INTERPRETATIONS This report utilized the following Code Cases and Interpretations:

)

2.1 ASME Code Interpretation, Section VIII-1-83-17, which allows for computer generated data repcrt i

fomis to be used in place of Code forms as long as size, arrangement, and content are identical.

2.2 Relief request PTB-03-06 which allows the use of Code Case N-416-1.

3.0 ABSTRACT OF REPAIR / REPLACEMENT l

NOTE:

QCR 98-0163 documents discrepancies with the use offornu PBF-0042a and PBF-0042b, Pressure Test Data Sheets Parts 1 & 2.

3i Repal.dreplacements performed on ASME Class 1,2 and MC items are documented on the attached NIS-2 famis. Repairs / replacements on ASME Class 3 items are documented on NIS-2 forms and maintained on file at PBNP. They are not included in this report in accordance with ASME Section XI, IWA-6210(c).

RRM 96-0069, WO 9612603 COMPONENT: PS AC 152N-6-H58A, Piping Supports CLASS: 2 DESCRIPTION: Add new pipe support to component cooling water return piping from 2HX-011B.

RRM 96-0073, WO 9700275 COMPONENT: SF-00820, Piping Supports for Spent Fuel Pool Valve CLASS: 2 DESCRIPTION: Modify existing pipe support to valve SF-00820 per MR 96-065.

RRM 97-0005, WO 9611809,9611987 COMPONENT: IlX-001 A & IlX-001B, Main Steam Heat Exchangers CLASS: 2 DESCRIPTION: Installed new lower level taps.

Page 4 of 6

l Wisconsin Electric Power Co.

231 West Michigan Avece Milwaukee, WI $3201 1

Point Beach Nuclear Plant. Unit I 6610 Nuclear Road Two Rivers.WI $4241 j

Docket 50 266 Commercial Service Date 12/21n0 RRM 97-0011, WO 9700184-COMPONENT: P-002B, Charging Pump CLASS: 2 DESCRIPTION: Replace charging pump discharge check valve seat and associated gage assembly.

. RRM 97-0012, WO 9702384 COMPONENT: PS AC 152N-12-H203, Piping Supports CLASS: 2-DESCRIPTION: Add U-bolt support on piping support.

RRM 97-0018, WO 9702548 & 9702549 COMPONENT: CC-00722A & CC-00722B, Component Cooling Valves CLASS: 2 DESCRIPTION: Replace 3 studs of 16 on each valve (random) for inspection.

RRM 97-0052,97-0063, WO 9710734 COMPONENT: SI-00847A, Safety Injection Valve CLASS: 2 DESCRIPTION: Replaced valve.

RRM 97-0053,97-0064, WO 9710735 COMPONENT: SI-00847B, Safety injection Valve CLASS: 2 I

DESCRIPTION: Replace valve.

RRM 97 0065, WO 9604124 COMPONENT: CV-00265-PCV, Chemical & Volume Control Valve CLASS: 2 DESCRIPTION: Replace studs and nuts on valve.

RRM 97-0070, WO 9713413,9713414,9713415 COMPONENT: Various Piping Supports, Chemical & Volume Control i

CLASS: 1/2 DESCRIPTION: Adjust U-bolt for minimum clearance of 1/8" between U-bolt and top of pipe.

RRM 97-0071, WO 9713738

.. COMPONENT: PS CH 2501R-1-SI A, Chemical & Volume Control Pipe Support CLASS: 1 DESCRIPTION: Modify support for valve 1-CV-00386 per MR 97-120*A.

Page 5 of 6

. ~.,, -.

i Wisconsin Electric Power Co.

l 231 Wem Michigan Avetae Milwaukee, WI $3201 Point Beach Nuclear Plant, Unit i

{

6610 Nuclear Road Two Rivers, WI 54241 Docket 50-266

)

Conunercial service Date 12/21/70 I

t RRM 97-0078,97-0079, WO 9714946 & 9714947 COMPONENT: PS EB-08-H33 & PS EB-08-if37, Main Steam Pipe Support CLASS: 2 DESCRIPTION: Install and modify pipe support anchor to ensure code compliance per MR 97-099*D.

' RRM 97-0088,97-0089, WO 9711902 COMPONENT: MS-02082, Auxiliary Feedwater Valve CLASS: 2 DESCRIPTION: Replace flange bolting and trip throttle valve per MR 97-099*F01.

RRM 98-0029, WO 9710137 l

COMPONENT: HS-8, Main Steam Snubber CLASS: 2 DESCRIPTION: Replace rod bushing with new rod bushing.

I RRM 98-0035, WO 9703633 COMPONENT: RC-00435, Reactor Coolant Valve CLASS: 1 l

DESCRIPTION: Replace nozzle on presstuizer safety valve.

RRM 98-0047, WO 9606631 l

COMPONENT: CV-00244, Chemical & Volume Control Valve CLASS: 2 i

DESCRIPTION: Replace flange bolting and clean gasket surface.

RRM 98-0048, WO 9700171 COMPONENT: CV-00112A, Chemical & Volume Control Valve 1

CLASS: 2 DESCRIPTION: Replace gaaket and one stud due to corrosion, l

l l

RRM 98-0051,98-0052, WO 9703687 l

COMPONENT: CC-00745, Component Cooling Valve l

CLASS: 2 DESCRIPTION: Replace like-for-like body / bonnet studs / nuts, hinge pin plugs and lengthen bushings.

Page 6 of 6

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date September 16,1997 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet I

of 2 Address

2. Plant Point Beach Nuclear Plant Unit i

Name 6610 Nuclear Road, Two Rivers, WI 5424I WO 9612603 Address Repair Organization P.O. No., Job No. Ete,

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Component Cooling

5. (a) Applicable Construction Code B31.1 1932_ Edition, None Addenda, N/A Code Case (Piping)

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda

6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Corte Name of Name of Manufacturer Board Other Year or Starr ped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes ter No)

PS AC 152N4-H18^

N/A N/A N/A N/A N/A Replacement No i

7. Description of Work:

Add new pipe support to CCW return piping from 211X-011B.

8. Tests Conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure O Other g Pressure psi Test Temp.

'F Visual NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

i Sheet _2 _ of _2_

l-Form NIS-2 Continued

9. Remarks RRM 96-0069 Applicable Manufacturer's Data Reports to be atta:hed.

i l

l CERTIFICATE OF COMPLIANCE l

l I

We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Ceitificate of Authorization No. Docket 50-266 Expiration Date N/A M

/8 ' M.19I Signed

. ISI coordinator Date Owner or Owner's Designee, Title I

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBil. Co. ofllartford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to Julv 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions 10731. WI-100657

.I.N.A

)

/ upector's SMature" National Board, State, Province, and Endorsements f

Date d 19 Y

=

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date February 25,1997 Name-231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of '2 Address

2. Plant - Point Beach Nuclear Plant Unit 1

i Nme 6610 Nuclear Road. Two Rivers, WI 54241 WO 9700275 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A i'

Name Authorization No.

N/A j

6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A j

Address

4. Identification of System:

Spent Fuel

5. (a) Applicable Construction Code B31. I 19JiL. Edition, None Addenda,RA, Code Case Bechtel 6118-M-78, AISC 6th Edition, MSS SP58,1967 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Compor,ents
Repaired, ASME National
Replaced, Code Nameof Name of Manufacturer Board Other Year or Stamped Componet t Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

SF-00820 N/A N/A N/A N/A N/A Replacement No j

i i

7. Description of Work:

Modify exi: ting pipe support to valve SF-00820 per MR 96-065.

8. Tests Conducted: Hydrostatic 0 Pneumatic O Nominal Operating Pressure O Other (a Pressure psi Test Temp.
  • F Visual NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x i1 in.,(2) information in items I through 6 on this report is included on each sheet, and (3) each shect is numbered and the number of sheets is recorded at the top of this form, t

.~

l -

- --....... - -. -... -. ~ - -. -. - _. _ -.. =. -.

Shitet _2_ of 2_

Form NIS-2 Continued

9. Remarks RRM 96-0073 Apphcable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE

'We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp. M/A Certificate of Authorization No. Docket 50-266 Expiration Date N/A l

. Ist coordinator Date /# ' M.19 A

A1 Signed Owner or dwar's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vescel Inspectors and the State or Province of Wisconsin and employed by HSBil. Co. of Hartford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions 10731. Wi-100057

. I.N. A

[ Inspector's 5fgnature" /

National Board, State, Province, and Endorsements O

W Date C

19 i

.. - ~ _ -.

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1 Owner Wisconsin Electric Power Company Date May 28, !998 Name j

231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of 2 Address 1

2. Plant Point Beach Nuclear Plant '

Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 0611809,9611987 Address Repair Organization P.O. No., Job No Etc.

j j-

3. Work Performed By; Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A

)

Address

4. Identification of System:

Main Steam l

S. (a) Applicable Construction Code ASME Section III 19 77 Edition,_Wll. Addenda, N/A Code Case

)

WEST Spec. 676380 Rey,1 - 09/20/1996 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No_ Addenda

6. Identification of Components Repaired or Replaced and Replacement Components l
Repaired, ASME National Replaced.

Code i

Name of r4ame of Manufacturer floard Otlier Year or Stamped Component Manufacturer Serial No.

No.

Identification 13uilt Replacement (Yes or No)

IlX 001 A Westinghouse 16A60791 16A6079-1 U010616 N/A Replacernent No IIX.0013 Westinghouse 16A6079 2 16A6079-2 U010617 N/A Replacement No 1

7. Description of Work:

Installed ncw lower level taps.

l

8. Tests Conducted: Ilydrostatic O Pneumatic 0 Nominal Operating Pressure O Other Qg Pressure psi Test Temp.

'F MT & UT at location, hydro not required NOTE: Supplemental sheets in frm oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2) infonnation in items I tlirough 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

l

1 Sheet 2_ of _2_

Form NIS-2 Continued i

9. Remarks RRM 97-0005 Apphcable Manulacturer's Data Repons to be anached.

i j

CERTIFICATE OF COMPLI ANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authoriattion No. Docket 50-266 Expiration Date _ N/A i

Signed

.ts1 coordinator Date

.19 Owucr or Owner'lDaigoce, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid cornmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by IISBil. Co. ofIbrtford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to July 14.199jt and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective masures described in this Owner's Report in accorde.nce with the requiremenu of the ASME Code,Section XI.

i By signing this cenificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descr, bed in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/

>,fo s//

E/

Commissions 10731. WI-100057

.1.N.A Ig _

[ inspector's signattyf" ~ ' '

National 130ard. State, Province, and Endorsements Date 0

/fl9$rV l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date March 6,1997 Name 231 W. Michigan Ave., Milwaukee WI $3201 Sheet 1

of 2 Address i

2. Plant Point Beach Nuclear Plant Unit 1

-Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9700184 i

Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Ncme Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Chemical & Volume Control

5. (a) Applicable Construction Code B31.1 19_fi2_ Edition, None Addenda, E/A. Code Case WEST Spec. 676370 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stunped Component Manufacturer Serial No.

No.

Identification Buih Replacement (Yes or No)

P-002B Ajax Iron 64$8 N/A N/A N/A Replaceraent No Works

7. Description of Work:

Replace charging pump discharge check valve seat.

8. Tests Conducted: ilydrostatic 0 Pneumatic 0 Nominal Operating Pressure g Other g Pressure._Lo&2 psi Test Temp. _103 'F VT-2 NOTE: Supplemental sheets in form oflists, sketches, or drawings rnay be used, provided (1) size is 8% in. x I I in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet _2__ of _2_

Form NIS-2 Continued

9. Remarks RRM 97-0011 Applicable Manufacturers Data Reports to be attached.

CERTIFICATE OF COMPLI ANCE We certify that the statements made in the report are correct and this replacement confonns to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50 266 Expiration Date N/A M

.Ist coordinator Da e M

.19 Signed A

/

Owner or Ov/nefs Iksignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by _IISIllL.Caoff artford. CT have inspected the components described in this Owner's Report during the period May 10.193ft.to l

July 14.1998. and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

i By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the l Inspector nor his ernployer shall be liable in any manner for any personal injury or property damage or a loss of l

any kind arising from or connected with this inspection.

//

Commissions _.jDJJL Wi-100Q37 W.A.__.

[%c -pectors (nature National Board, Stae, Province, and Endorsenwnts Date df' M 19 9[

s l

l J

i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date February 28,1997 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet I

of 2

' ddress A

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9702384 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name' Authorization No.

N/A 6610 Nuc1 car Road, Two Rivers, WI $4241 Expiration Date N/A Address j

l

4. Identification of System:

Residuallleat Removal 1

5. (a) Applicable Constructiori Code B31.1 19 22._ Edition, Ennt Addenda, E/& Code Case j

AISC 9th Edition, MSS-SP581992 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda i

6. Identification of Components Repaired or Replaced and Replacement Components i

?

Repaired, ASME National
Replaced, Code

)

Name of Name of Manufacturer Board Other Year or Stamped j

Component Manufacturer Seria! No.

No.

Identification Built Replacement (Yes or No)

PS AC 152N-12 N/A N/A N/A N/A N/A Replacement No H203 I

7. Description of Work:

Add U-bolt support.

S. Tests Conducted: Hydrostatic 0 Pneumatic O Norninal Operating Pressure O Other g Pressure psi Test Temp.

'F Visual NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of tins form.

l 9

Sheet _2._ of _2_

Form NIS-2 Continued

9. Remarks RRM 97-0012 '

~

Applicable Manufacturer's Data Reports to be attached.

I i

i l

l j

CERTIFICATE OF COMPLIANCE

- We certify that the statements made in the report are correct and this renlacement conforms to the rules of the ASME Code Section XI.

repair or replacernent l

Type Code Symbol Stamp N/A i

Certificate of Authorization No. Docket 50 266 Expiration Date.E/A W

/b'

. 19 Signed M'?

A ISI coordinator Date Owner or dwncf's Designee, Title l

l CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel i

l Inspectors and the State or Province of_Wisconsm and employed by INBil. Co. of Hartford. CT_ have inspected the components described in this Owner's Report during the period May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

U By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the g

Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions 10731. W1-1 0052

.1.N.A

' finspector's' Signature National Board State, Province, and Endorsemems Date 86

/7 19 9 I k..

e --

-u- ---. -

,"ne

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS j

As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date February 28,1997 Name 231 W. Michigan Ave., Milwaukee WI $3201 Sheet 1

of 2

)

Address

2. Plant Point Beach Nuclear Plant Unit 0

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9702548 WO 9702549 Address Repair Organization P.O. No., Job No. Etc.

3. Work Perfonned By:

Wisconsin Electri<: Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Component Cooling 5 (a) Applicable Construction Code Enl._19_62_ Edition, Nunc Addenda,.N/A. Code Case ASME SA-193 GR B7 Westinghouse 676241 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda,

6. Identification of Components Repaired or Replaced and Replacement Components Repaired.

ASME National

Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Msnufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

CC-00722A Velan, Inc.

N/A N/A N/A N/A Replacement No CC4X)7228 Velan, Inc.

N/A N/A N/A N/A Replacement No

7. Description of Work:

Replace 3 studs of 16 on each valve (random) for inspection.

8. Tests Conducted: liydrostatic 0 Pneumatic 0 Nominal Operating Pressure g Other O Pressure 12_ psi Test Temp. JDQ_'F CC-00722A Other O Pressure 136 psi Test Temp. 100

'F CC-00722B NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

l l

Sheet _2_ of_2_

Form NIS-2 Continued

9. Remarks RRM 97-0018 Applicable Manufacturers Data Reports to be attached.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Ehktt 50-266 Expiration Date N/A

(

M' 19 Signed A^,

.151 coordinator Date OwnerorOw6er/sDesignee Title l'

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of.Etnonsin. and employed by HSBII. Co. of Hartford. CT have inspected the components described in this Owner's Report during the period May 10.199,6 to Julv 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Ownefs Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the exa.ninations and corrective measures described in this Owners Report. Furthermore, neither the L

Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of l,

any kind arising from or connected with this inspection.

l'

//

/l l'

N-

/A,27V Commissions 10731. WI-100057

_ J,hLA_ _

f Inspect 6fs Signature National Board, State Province,and Encorsenwnts Date d O 19 l

l r-

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date November 20,1997 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet i

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

-Name 6610 Nuclear Road. Two Rivers, WI $4241 WO 9710734 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Safety Injection

5. (a) Applicable Construction Code B31.1 19.62 Edition, None. Addenda,E/.A. Code Case Westinghouse Spec. 676262 (b) Applicabie Edition of Section XI Utilized for Repairs or Replacements 1986 No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or S amped Compoi.cnt Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

SI-00847A Rockwell Mfg.

3674F3161 N/A N/A N/A Replaced No Co.

7. Description of Work:

Replaced SI-00847A.

8. Tests Conducted: Hydrostatic O Pneumatic 0 Nominal Operating Pressure g Other O Pressure 220 psi Test Temp. 74,_ F VT-2 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x i 1 in.,(2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

{.

Sheet _2_. of _2_

Form NIS-2 Continued

9. Remarks RRM 97-0052,97-0063, Code Case N-416 Apphcable Manutacturer's Data Reports to be attached.

1 P

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this renlacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-266 Expiration Date N/A Date M ' !b.19 Signed I4

.tst coordinater Owner or Dwnft's%signce, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBil. Co. of Hartford. CT have inspected the components described in this Owncts Report during the period.May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

v By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or conne ted with this inspection.

o/

~

Commissions 10731. Wi-100057

.I.N.A

[nspector's liignature /

National Board, State, Province, and Endorsements Date N

/ I 19

FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date November 17,1997 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of 2 Address

2. Plant Point Beach Nuclear Plant Unit i

Name 6610 Nuclear Road, Two Rivers, W'l 54241 WO 9710735 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Sytnbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Safety Injection

5. (a) Applicable Construction Code B31.1 1931._. Edition, None Addenda,E!A. Code Case Westinghouse Spec. 676262 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

SI-00847B Rockwell Mfg.

None N/A N/A N/A Repaired No Co.

l

7. Description of Work:

Replace valve.

8. Tests Conducted: llydrostatic 0 Pneumatic O Nominal Operating Pressure g Other g Pressure 225 psi Test Temp. 73
  • F VT-2 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2._ of _2_

Form NIS-2 Continued l

9. Remarks RRM 97-0053, RRM 97-0064 l

Applicable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct anc this reonir conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-266 Expiration Date N/A h

Signed

.isi coordinator Date 19 Owner or OMri Ddignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. Co. of Hartford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to

.fulv 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of ary kind arising from or connected with this inspection.

Commissions 10731. WI-IO0057

.1.N.A

/l5pectors Signature ' '

National Board, State, Province, and Endorsements Date d7 /

19I i

a

i i

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l

As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date November 21,1997 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet I

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9604124 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Narte Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Chemical & Volume Control

5. (a) Applicable Construction Code B31.1 19 62__ Edition, None Addenda,.ElA. Code Case Westinghouse Spec. G-676232,676281 (b) Applicable Edition of Seenon XI Utilized for Repairs or Replacements 1986 No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Nameof Manufa'turer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

CV-00265-PCV Fisher Govemor 667ES N/A N/A N/A Replacement No

7. Description of Work:

Replace studs and nuts on valve.

8. Tests Conducted: Hydrostatic O Pneumatic 0 NominalOperating Pressure gg Other O Pressure M psi Test Temp. 132 ?F VT-2 i

NOTE: Supplemental sheets in form oflists, sketches, or drawings may be ustd, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is l

numbered and the number of sheets is recorded at the top of this form.

Sheet _2_ of_2_

Form NIS-2 Continued

9. Remarks RRM 97 0065 Applicable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement I

Type Code Symbol Stamp N/A Cenificate of Attthorization No. Docket 50 266 Expiration Date N/A q/

a

// @

. si coordinator Date O

.19 Signed Owner or Ownd's I4siipe6, Title ~ ~

l.

l l

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel l '.

Inspectors and the State or Province of Wisconsin and employed by HSBII. Co. offligiford. CT have inspected the components described in this Owners Report during the period May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions 10731. WI 100057

.I.N.A

[ jnspector's $(gnature " '

National Board, State, Province, and Endorsements Date 8C M 19 l

l

.. \\

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date November 19,1997 Name 231 W. Michigan Ave., Milwaukee WI $3201 Sheet 1

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9713413,9713414,9713415 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Chemical & Volume Control

5. (a) Applicable Construction Code B31.1 19_fi2_ Edition, None Addenda, N/A Code Case Westinghouse Spec G-676262 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

PS Cil 250lRl-$43 None None N/A N/A N/A Replacement No PS Cil l51R-2-S50 None None N/A N/A N/A Replacement No PS Cil 250lR l.$62 None None N/A N/A N/A Replacement No

7. Description of Work:

Adjust U-bolt for minimum clearance of 1/8" between U-bolt & top of pipe.

S. Tests Conducted: Ilydrostatic 0 Pneumatic O Nominal Operating Pressure O Other O Pressure psi Test Temp.

'F NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet.2_ of _2_

Form NIS-2 Continued

9. Remarks RRM 97-0070 Applicable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate o duthori ion No. Docket 50-266 Expiration Date N/A Signed 2.tsi coordinator Date M-19 b Owner or Owndr's'besignee, Title l

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBil. Co. of Hartford. CT have inspected the components described in this Owners Report during the period May 10.1996 to Julv 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Repo' t. Furthermore, neither the r

Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

b Commissions 10731. WI-100057

.1.N.A

[.pector's Siglature National Board, State. Province, and Endorsements Date

(

/

19 7

_._-__-_.-_.______._.m._

_ _. _ _ _ _. _.. ~. _ _...... _ _ _. _ _

)

FOR.M NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

.As Required by the Provisions of the ASME Code Section XI

1. Owner - Wisconsin Electric Power Company Date November 19,1997 Name

+

231 W. Michigan Ave., Milwaukee WI 53201 Sheet I

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9713738 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A l

6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address J

4. Identification of System:

Chemical & Volume Control l.

5. (a) Applicable Construction Code B31.1 19.ft2._ Edition,.Nons_ Addenda,.N/A. Code Case 1

l AISC 6th Edition Bechtel 6118-M 80 MSS-SP-581967 l-(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addanda

]

6. Identification of Components Repaired or Replaced and Replacement Components 1

l

Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

PS CII250lR 1 SI A -

None.

None N/A.

N/A N/A Replacement No l-

7. Description of Work:

Modify support for valve 1 CV-00386 per MR 97-120* A.

p

- 8. Tests Conducted: Hydrostatic O Pneumatic 0 Nominal Operating Pressure O Other g Pressure psi Test Temp.

'F l'..

Visua!

NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is i

8% in. x ! I in.,(2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of tnis form.

i i

i.~.

r

?

E[

Sheet.l _ of-.2_

r Form NIS-2 Continued

- 9. Remarks -

RRM 97-0071 s

Applicable Manufacturer's Data Reports to be attached.

3 5-i f

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-266 Expiration Date N/A Signed de I coordinator Date /O

.19 Owner or Dwn6r'sVesignee. Title" CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. CLof Hartford. CT have inspected the components described in this Owners Report during the period May 10.1996 to Julv 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

//

As -/}7 Commissions 10731. WI-100057

.I.N.A

/ Inspector's Signature National Board, State, Province, and Endorsements

"/

Date dc

/ I 19 I

~. -

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1

1. Owner Wisconsin Electric Power Company Date January 16,1998

,Name l

231 W. Michigan Ave., Milwaukee WI $3201 Sheet I

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9714946 & 9714947 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A 1

Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address l

4. Identification of System:

Main Steam

5. (a) Applicable Construction Code B31.1 19.61_ Edition, None Addenda, N!iCode Case AISC 6th Edition Bechtel 6118-M-78 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

PS ED-08-103 None None N/A N/A N/A Replacement No PS ED.08-ID7 None None N/A N/A N/A Replacement No

7. Description of Work:

Install and modify pipe support anchor to ensure code compliance per MR 97-099'D.

8. Tests Conducted: liydrostatic 0 Pneumatic 0 Nominal Operating Pressure (g Other O Pressure psi Test Temp.

'F VT-2 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 1

8% in. x 11 in.,(2) information in items I through 6 on this repcrt is included on each sheet, and (3) each sheet is

(

numbered and the number of sheets is recorded at the top of this form, t

Sheet _2_ of _2_

Form NIS-2 Continued

9. Remarks RRM 97-0078,97-0079 Applicable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of uthorization No. Docket 50-266 Expiration Date N/A Signed I1 I

M~

. 19

.!SI coordinator Date m

Owner or %vner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. Co. of Hartford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or innplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

//a7 Commissions 10731. WI-100057

.I.N.A

[nspector'[SIg' nature #

National Board, State, Province, and Endorsements Date OCf /S 19 9W l

l l

l

FORM NIS-2 OWNER'S REPORT FOR REPAIR 5; OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner. Wisconsin Electric Power Company Date January 15,1998 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet I

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road. Two Rivers, WI 54241 WO 9711902 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Auxiliary Feedwater

5. (a) Applicable Construction Code B31.1 19 fi2 Edition, None Addenda,_N/A. Code Case Bechtel Spec M-78 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

MS-02082 Gimpel Machine 68-10371 2 N/A N/A N/A Replacernent No Works, Inc.

7. Description of Work:

Replace flange bolting and trip throttle valve per MR 97-099'F01

8. Tests Conducted: Hydrostatic 0 Pneumatic O Nominal Operating Pressure Qg Other O Pressure 675 psi Test Temp. _fi21_'F VT-2 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 1 I in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet.l of 2,

- Form NIS-2 Continued

' 9. Remarks RRM 97-0088, RRM 97-0089 Apphcable Manufacturer's Data Reports to be attached.

CERTIFICATE OF COMPLIANCE '

We certify that the statements made in the report are correct and this reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement 4

i Type Code Symbol Stamp N/A i

Certificate of Authorization No. ' Docket 50-266 Expiration Date N/A L

t Signed tg _

h

_^El coordinator Date M 19 Owner orMwner's Designee,litle j ~

CERTIFICATE OF INSERVICE INSPECTION 1, the ur.dersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel j.

Inspectors and the State or Province of Wisconsin and employed by HSBII. Co. of Hartford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to Julv 14.1998.

[

and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

/

Commission.

10731. WI-100057

.I.N.A

[IrApector's Sign'ature Nat*.,nal Board, State Province, and Endorsements Date N O 19 I

-4

.r-m...

.m

.. _ ~

t l

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date June 12,1998 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

l Name 1

6610 Nuclear Road, Two Rivers, WI 54241 WO 9710137 Address Repair Organization P.O. No., Job No. Etc.

3.' Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road. Two R.ivers, WI 54241 Expiration Date N/A Address

4. Identification of Syst:m:

Main Steam

5. (a) Applicable Construction Code B31.1 1932 Edition, None Addenda,.N/A. Code Case (Piping)

Bolting SAE 660 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda

6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

IIS-8

.Anker-liolth 371490 N/A N/A N/A Replacement No Division

7. Description of Work:

Replace rod bushing with new rod bushing.

8. Tests Conducted. Hydrostatic O Pneumatic O Nominal Operating Pressure O I

Other g Pressure psi Test Temp.

'F I

VT-3 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2)information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

i l

l L

Sheet _2._ ofl_

. Form NIS-2 Continued

9. Remarks RRM 98-0029 Applicable Manufacturers Data Reports to be attached.

CERTIFICATE OF COMPLIANCE l:

We certify that the statements made in the report are correct and this __ reolacement conforms to the rules of the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-266 Expiration Date N/A M'

.19 Signed A4 I coordinator Date OMr or ow re' Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. Co. of Hartford. CI. have inspected the components described in this Owners Report during the period May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from connect with this inspection.

I/

Commissions 10731. WI.100057

.I.N.A nspectors F/gnature National Board, State, Province, and Endorsements Date 84. / Y 19 W

l FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 4

1. Owner Wisconsin Electric Power Company Date June 29,1998 Name 23! W. Michigan Ave., Milwaukee WI 53201 Sheet I

of 2 Address

2. Plant Point Beach Nuclear Plant Unit i

Name I

6610 Nuclear Road, Two Rivers, WI f4241 WO 9703633, P.O. 45000i2503 j

Address Repair Organization P.O. No., Job No. Etc.

j i

3. Work Performed By:

Crane Nuclear Inc.

Type Code Symbol Stamp VR/NR Name Authorization No.

261/24 860 Remington, Bolingbrook,IL 60440 Expiration Date 07-02-99/02-17-00 Address

{

4. Identification of System:

Reactor Cc 91.nt l

5. (a) Applicable Construction Code ASME Section III 19.fd_ Edition, None Addenda, N/A Code Case Westinghouse Spec. 676279 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components 6 paired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

RC-00435 Crosby Valve &

ilB-BP 86, N/A N/A N/A Replacement Yes Gage Co.

Type E r

}

7. Description of Work:

Replace nozzle on pressurizer safety valve.

1

8. Tests Conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure g Other g Pressure 2115 psi Test Temp. 501 'F i

VT-2 IT-230 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2._ of_1_

Form NIS-2 Continued 1

9, Remarks RRM 98-0035 Applicable Manufacturer's Data Reports to be attached.

l CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this renlacement conforms to the rules of l

the ASME Code,Section XI.

repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No. Docket 50-266 Expiration Date N/A

.ts! coordinator Date M

~

'.19 Signed 4f Owner or Owder's Defignee, Title f

CERTIFICATE OF INSEIWICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel I

j.

Inspectors and the State or Province of Wisconsin and employed by HSB11. Co. of Hartford. CT have l

inspected the components described in this Owner's Report during the period May 10.1996 to l

Julv 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

l l

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, l

concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the l

Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of L

any kind arising from or connected with this inspection.

Commissions 10731. WI-100057

.I.N.A

[ Inspector'sdignature " ~

National Board, State, Province, and Endorsements Date M 19 N l

.+.

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI

1. Owner Wisconsin Electric Power Company Date June 24,1998 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of 2 Address

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9606631 Address Repair Organization P.O. No., Job No. Etc.

3. Work Performed By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A Name Authorization No.

N/A 6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address

4. Identification of System:

Chemical & Volume Control

5. (a) Applicable Cons:ruction Code B31.1 19_62._ Edition, None Addenda, N/A Code Case Westinghouse G-676262 Westinghouse G-676270 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components h
Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

CV-00244 Copes Wican Div.

None N/A N/A N/A Replaced No

7. Description of Work:

Replaced flange bolting.

8. Tests Conducted: Hydrostatic O Pneumatic 0 Nominal Operating Pressure g Other g Pressure NOP psi Test Temp.._NQL*F VT-2 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet _2 _ of _2_

Form NIS-2 Continued

9. Remarks RRM 98-0047 -

Applicable Manufacturer's Data Reports to be attached.

l CERTIFICATE OF COMPLIANCE

. We certify that the statements made in the report are correct and this. replacement' conforms to the rules of the ASME Code,Section XI.

repair or replacement I

Type Code Symbol Stamp N/A Certificate of ythorization No. Docket 50-266 Expiration Date N/A l

[

Date [ O ~

., 19 f

Signed

. si coordinator Owner or Owhefs' Des %nce. Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by HSBII. Co. of Hartford. CT have inspected the components described in this Owner's Report during the period May 10.1996 to July 14.1998. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this cettificate neither the inspector nor his employer makes any warranty, expressed or implied, i concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

//

/4,- -

Commissions 10731. WI-100057

. I.N.A National Board, State, Province, and Endorsements

[ Inspector's SiMa'ture Date 8

/3 199I

i FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1

W

l. Owner Wisconsin Electric Power Company

, Date June 24,1998 Name 231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of 2 Address i

I'

2. Plant Point Beach Nuclear Plant Unit 1

Name 6610 Nuclear Road, Two Rivers, W1 5424 i WO 9700171 Address Repair Organization P.O. No., Job No. Etc.

3. Work Perfonned By:

Wisconsin Electric Power Co.

Type Code Symbol Stamp N/A

}

Name Authorization No.

N/A i

6610 Nuclear Road, Two Rivers, WI 54241 Expiration Date N/A Address 4

4. Identification of Sy.; tem:

Chemical & Volume Control l

i

5. (a) Applicable Construction Code B31.1 19_fd_ Edition, None Addenda,ElA. Code Case j

Westinghouse G-676262 Westinghouse G-676270

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addenda
6. Identification of Components Repaired or Replaced and Replacement Components
Repaired, ASME l

National

Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped Component Manufacturer Serial No.

No.

Identification Built Replacement (Yes or No)

CV@l12A Copes Vulcan Div.

None N/A N/A N/A Replacement No l

i

7. Description of Work:

Replace one stud due to corrosion.

8. Tests Conducted: Hydrostatic 0 Pneumatic 0 Norninal Operating Pressure g Other O Pressure psi Test Temp.

'F VT-2 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

4

I Sheet x org f

Form NIS-2 Continued

9. Remarks RRM 98-0048 Applicable Manut'r.cturer's Data Reports m be attached.

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this.tsplassment conforms to the rules of the ASME Code,Section XI.

repair or replacement

(

Type Code Symbol Stamp N/A Certificate of uthorizatio, No. Docket 50 266 Expiration Date 1[!A 19 NI Signed..

At u.tst coordinator Date /

Owner or $neri DesTg' nee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconr.in and employed by llSBII. Co. of Hartford. CT have inspected the cc.mponents described in this Owner's Report during the period May 10.199fi, to hily 14.1998, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, cor.cerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or t loss of any kind arising from or connected with this inspection.

d Commissions 10731. Wl-100057

.I.N.A

~~

[ Inspector's Sigfiature National Board, State Province, and Endorsements Date /Xf / 3 19 9tY i

i

_.. _. _ -. _. _.. _.... _ ~... _. _. _. _ _ _. _ -.._ _._ _. _ -. _.

40f'

[

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section X.I

l. ' Owner Wisconsin Electric Power Company Date June 17,1998 Name i

231 W. Michigan Ave., Milwaukee WI 53201 Sheet 1

of 2 Address i

2. Plant Point Beach Nuclear Plant Unit I

'~

Name 6610 Nuclear Road, Two Rivers, WI 54241 WO 9703687 4

Address Repair Organization P.O. No., Job No. Etc.

i.L'

3. Work Performed By:

Wisconsir. Ejectric Power Co.

Type Code Symbol Stamp N/A 1

Name Authorization No.

N/A

~6610 Nuclear Road, T*vo Rivers, WI 54241 Expiration Date N/A Address a.

1';

4. Identification ofSystem:

Component Cooling a

5. (a) Applicable Construction Code B31.1 19.ft2_ Edition, None Addenda,EIA. Code Case a

{

STM A 193 Gr. B7 ASTM A-194 Gr.24 Westinghouse 676241 1-(F

.,plicable Edition of Section XI Utilized for Repairs or Replacements 1986. No Addanda 1

6. ?
  • itication of Components Repaired or Replaced and Replacement Components i

a j

mer

Repaired, ASME National
Replaced, Code Name of Name of Manufacturer Board Other Year or Stamped j[

Component Manufacturer Serial No.

No.

Identification Built i Replacernent (Yes or No) 4 CC-00715 Velan.Inc.

114B '

N/A N/A N/A Replacement No 1

p j;

I

7. Description of Work:

Replace like-for-like body / bonnet studs / nuts, hinge pin plugs, and lengthen bushings.

8. Tests Conducted: Hydrostatic O Pneumatic O Nominal Operating Pressure Q Other O Pressure'

' psi Test Temp.

  • F VT-2 NOTE: Supplemental sheets in form oflists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in.,(2) information in iteins 1 through 6 en this report is included on each sheet, nr 1 (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

J Sheet _2_ of 2 1

Form NIS-2 Continued i

9. Remarks RRM 98-0051, RRM 98-0052 Applicable Mannfacturer's Data Reports to be attached.

i CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this reolacemeiconforms to the rules of the ASME Code,Section XI.

. repair or replacement Type Code Symbol Stamp N/A t

Certificate of uthorization No. Docket 50 266 fxpiration Date N/A Signed

.Ist coordinator Date

.19 Owner or dwdr's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Wisconsin and employed by JISBILhofJianfad CL have inspected the components described in this Owner's Report during the period.May.10.1996.to Julv 14.1998. and state that to the best of my knowledge and belief, the Owner haa performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

e

' By signing this cenificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examination, and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~

Commissions 10731. WI-100057 I,tLA_

pector's Sigfture National Board, State, Province, and Endorsements Date 8%I df 19 l

l l

l

.