ML17334A871
| ML17334A871 | |
| Person / Time | |
|---|---|
| Site: | Cook  |
| Issue date: | 03/29/1985 |
| From: | INDIANA MICHIGAN POWER CO. (FORMERLY INDIANA & MICHIG |
| To: | |
| Shared Package | |
| ML17334A869 | List: |
| References | |
| NUDOCS 8504050157 | |
| Download: ML17334A871 (37) | |
Text
ATTACHMENT NO.2 TO AEP:NRC:0659D DONALD C.COOK NUCLEAR PLANT UNIT NO.2 REASONS AND 10 CFR 50.92 JUSTIFICATIONS FOR THE PROPOSED TECHNICAL SPECIFICATION CHANGES Attachment 2 Page For clarity the Unit 2 T/S proposed changes are grouped into several categories.
Many of these changes are to achieve consistency with the Unit 1 T/S and the STS.Page references to these documents are given where appropriate.
A)The purpose of the first group of proposed changes is to make the Unit 2 Action Statements 2 and 6 like the Unit 1 T/S and the STS.Specifically we would like to change the phrase"one additional" to"the inoperable." This change is one that constitutes an additional restriction not presently included in the T/S.Therefore this change does not involve a significant hazards consideration as defined in 10 CFR 50.92.Page
References:
Action Statement 2;Unit 2 3/4 3-5 Unit 1 3/4 3-6 STS 3/4 3-7 Action Statement 6;Unit 2 3/4 3-6 Unit 1 3/4 3-7 STS 3/4 3-8 B)The second group of proposed changes to Unit 2 T/S requests an extension to the period of time in which one channel of our solid state protection system can be bypassed for surveillance testing.Specifically, we are requesting the one-hour time limit be extended to two hours in Action Statement 1 and Action Statement 13.The reasons for these changes are the same as those proposed for Unit 1 Category C.Although the changes may result in some increase to the probability or consequences of a previously analyzed accident or may reduce in some way a safety margin, the results of the change are clearly within all acceptable criteria with respect to the systems specified in the STS.Therefore, we believe that these changes do not involve significant, hazards considerations as defined by 10 CFR 50.92.Page
References:
Action Statement 1;Unit 2 3/4 3-5 STS 3/4 3-9 (Action Statement 12)Action Statement 13;Unit 2 3/4 3-21 STS 3/4 3-29 (Action Statement 14)C)The third proposed change to the Unit 2 T/S is an editorial change to Action Statement 2, part C on page 3/4 3<<5.This change adds a reference clearly defining the specification by which the quadrant power tilt ratio is to be measured.This change is purely administrative in nature and is intended to achieve consistency with the Unit 1 T/S and with the STS.Therefore, we believe this change does not involve significant hazards consideration as defined in 10 CFR 50.92.Page
References:
Unit 1 3/4 3-6 STS 3/4 3-7 Attachment 2 Page D)The fourth proposed change to the Unit 2 T/S is a change to Action Statement 16 on page 3/4 3-21.This change updates the T/S regarding the conditions under which operation may proceed with the number of operable channels less than total number of channels.The proposed change will achieve consistency with the STS.Although it is a change which may result in some increase to the probability or consequence of a previously analyzed accident or may reduce in some way a safety margin, the result of the change is clearly within all acceptable criteria with respect to the systems specified in the STS.Therefore, we believe that this change does not involve significant hazard consideration as defined by 10 CFR 50.92.Page
Reference:
STS 3/4 3-29 (Action 17)
ATTACHMENT NO.3 TO AEP:NRC:0659D DONALD C.COOK NUCLEAR PLANT UNIT NO.1 THE PROPOSED REVISIONS TO UNIT NO.1 TECHNICAL SPECIFICATIONS 3/4, 3 INSTRUMENTATION 3/4.3.1 REACTOR TRIP SYSTEM IN TRUMENTATiON LIMIT'.NG CONOITION FOR OPERATION 3.3.1,1 As a minimum, the reactor trip system instrumentation channels and interlocks of Table 3.3-1 shall be OPERABLE with RESPONSE.IMES as shown in Table 3.3-2.APPLICABILITY:
As shown in Table 3.3-1.AC i!QN: As snown in Table 3.3-1.5URV E'LANG E RE".U I R EMENTS 4.3.1.1.1 Each reac"or trip system instrumentation channel shall be demonstra.ed OP RABLE by the performance of the CHANNEL CHECK, CHANNEL CALIBRATION and CHANNFL FUNCTIONAL TEST operat>ons for ghe gooses end at tne frequencies snown in.able 4.3-1.m 4.3.1.1.2 The logic for the interlocks shall be demonstrated.
OPERABLE prior to each reactor startup unless performed during the preceding 92 days.The total interlock function shall be deronstrated OPERABLE at least once per 18 months during CHANNEL CALIBRATION testing of each channel affected by interlock operation.
4.3.1.1.3 The REACTOR TRIP SYSTEM RESPONSE TIME of each reactor trip function shall be demonstrated to be within its limit at, leas: once per 18 months.Each test shall include at least one logic train such that both logic trains are tested at Ieas once per 36 months and one channel per func;ion such that all channels are tested at least once every N times 18 months where N is the total number of redundant channels in a specific reactor trip function as shown in the"Total No.of Channels" column of Table 3.3-1.0.C.COOK-UNIT I 3/4 3-1 Amendment No.
l ABLE 3.3-2 RLAC'IOR l'RII'YSTL'M INSTRUHENTATION Rl'.SPONSE TIHLS FUNCT IONAI UN I I 1.Hanual Reactor'riir 2.I'ower Rarrge, Nr.'utrorr I'lux RLSPONSE T1HE NOT API'L I CABLE O.5 secollds*3.I'ower Rarrge, Neutrorr I lux, Iliglr Vositive Rate NOT A VI'L ICAIILE Power Range, Neutron Flux, lliglr Negative Rate 5.Inteorrediate Range, Neutrorr Flux 6.Source Rarrge, N<<ut.run I Iux/.Overterrrl)erature hT 0.Overpower hT 9.Vressur iz<<r I'ressure--Low 10.I'ressurizer Vressur e--lliglr ll.Pressurizer Water Level--lliglr
<0.5 seconds'OT API'L ICAIILE NOT APPL ICAIII E<6.0 seconds'OT Al'VL I CABLE<1.0 seconds<1.0 seconds NOT AVVI.ICAOLE Neutron d<<tectors are exellll)t lr'olll I'espollse tinre testing.Resporrse tirrre of the neutron flurry signal portion of the channel shall be measured from detector output or input of first electronic component in channel.0 TABLE 4.3-1 (Continued)
NOTATION With the reactor trip system breakers closed and the control rod drive system capable of rod withdrawal.
(1)(2)If not performed in previous 7 days.Heat balance only, above 15%of RATED THERMAL POWER.Adjust channel if absolute difference
>2 percent.(3)Compare incore to excore axial imbalance above 15%"of RATED THERtlAL POWER.Recalibrate if absolute difference
>3 percent.(4)(5)(6)(7)Manual ESF functional input check every 18 months.Each train tested every other month.Neutron detectors may be excluded from CHANNEL CALIBRATION.
Below P-6 (BLOCK OF SOURCE RANGE REACTOR TRIP)setpoint.D.C.COOK-UNIT 1 3/4 3-14 Amendment No.
INSTRUMENTATION 3/4.3.2 ENGINEEREQ SAF" I Y FEATUR ACTUATION SYST"M INSTRIŽENTAT LIMITING CQNOiTION FOR OPERA iON 3.3.2.1 The Engineered Safety Feature Actuation Systen (ESFAS)insttumen a-tion channels and int.locks snown in Table 3.3-3 shall be OPE."-'BLE with their trip setooints set consistent with the values shown in the Trip Setpoint column of Table 3.3-4 and with RESPONSE TIMES as shown--in Table 3.3-5.APPLICAB!LITY; As shown in Table 3.3-3.ACTION: a.IAlith an ESFAS instrumentation channel trip setpoint less conserva-tive than the value shown in the Allowable Values column of Table 3.3-4, declare the channel inoperable and apply the applicable ACTION requirement of Table 3.3-3 until the channel is restored to OPERASL=status with the trip setpoint adjusted consistent with the Trip Setpoint value.b.With an ESFAS instrumentation channel inoperable, take the ACTION shown in Table 3.3-3.SURVEIL'NCE RENDU'.R"".EN
~4.3.2.1.1 Each ESFAS instrumentation channel shall be demons.rated OPERABLE by the pe.formance of the CHANNEL CHECK, CHAI4NEL CALIBRATION and CHAN l-FUNCTiONAL TEST operations zox the MQDEs and at the frequencies shown in Table 4.3-2.4.3.2.1.2 The logic for the interlocks shall be demonstrated OPERABLE during the automatic actuation logic test.The total interlock-unction shall be demonstrated OPERABLE at least once per 18 months durina CHANNEL CALIBRATiON testing of each channel affected by interlock operation.
4.3.2.1.3 The ENGINEEREO SAFETY FEATURES RESPONSE TIME of each ESFAS function shall be demonstrated to be within the limit at least once per 18 months.Each test shall include at least one logic train such that: both logic trains are tested at least once per 36 months and one channel per function such tnat all channels are tested at least once per N times 18 months where N is the total number of redundant channels in a specific ESFAS function as shown in the"Total No.of Channels" Column of Table 3,3 30 0.C.COOK-UNIT 1 3/4 3-15 Amendment No.
TABLE 3.3-3 ENGItfEERED SAFETY FEATURE ACTUATIOtl SYSTBI I tlSTRU!1EtlTATIOfl FUNCTIONAL UNIT TOTAL NO.CffANtfCI.S OF CIIAflfll:LS TO 1 ff IP ill ill l'lUf1 ClfAHtlE LS OI'CIIAOLE APPLICABLE NODES ACTIOII b.C.Automatic Actuation Logic Containment Pressure-lliqh d.Pressurizer Pressure-Low e.Differential Pressure Between Steam Lines-lligh SAFETY INJECTION; TURBINE.TRIP, FECDWATER ISOLATION, ArfD HOTOR DRlVE!f f'EEDWATER PUtfPS a.tlanua I Initiation 1,2,3,4 1,2,3,4 1,2,3 1, 2, 3!I 1, 2, 38k'8 13 14" Four Loops Operating Tllree Loops Operating 3/s team 1 ine 3/operating steam line 2/steam line 2/steam line any steam line 1/steam 2/operating line, any steam line operating 5 tealll 1 lne TAIII E 3.3-3 (Contirrueri}
ENGINEEREI)
SAFETY FEATURE ACTUA110N SYSTFH INSTRUMENTATION FUNCTIONAL UNIT f.Steam Flow in Two Steam Lines-lligh TOThl.NO.OF CIIANNLLS CIIANNELS TO TRIP Hl N IHUH CIIANNELS OPERABLE Al'Pl I CABLE HOOES ACTION 3lP Four Loops Operating 2/steam line 1/steam line 1/steam line arry 2 steam 1 irres Ttrree Loops OIrerati>>g CO I NC I BENT Mi lll E I I llf.R T--l.ow-Low avg I our Loops Operati>>g 1trree I.ooirs Operati>>g 2/operating stearo li>>e 1 T/loop avrJ I T avg operating loop I/any operating steam line 2 T , any loops in avg any operating loop I/opera t ing steam line 1 T any avg 3 loops 1 T in any avg two operating loops 15 15 IAIII.L 3.3-3 (Conti>>ued)
I,.NhltILI'IIEI)
SAI:I fY Fl.hfUllf ACI'UATION SYSlfH ItISTIIUHLNTATION FtINCTIONAL UNI r 0th, COlNCll)ENT MITII Steam Line Pressure-Low TOTAL NO.CIIANNELS Ol'IIANtlf.l.S TO TIIIP Hl N I HUH CIIANNELS OI'l:II AOL f APPI.I CAOLf HODES ACTION Four Loops Operat.ing Tl~ree Loops Opelat,)ncJ I I>>'essure/
loop 1 pressure/operdt.lncJ loop 2 pressures a>>y loops 1 pressure in a>>y oper-ating loop 1 pressure any 3 loops 1 pressure in any 2 operating loops 1 4*15 2.CON fAINHLN I Sl'IIAY a.Ha>>ual b.Au toe>>a t 1 c Ac t ua t, i o>>LocJ)c 1.2,3,4 10 l.2,3,4 13 c.Co>>ta i>>ment I'ressure--
II I cJII-II)cJh 1,2,3 16 IAULL 3.3-3 Continued FNGINEEREO SAFETY FEATURE ACTUATION SYSTFH INSTRUHENTATION FUNCTIONAL UNIT 4.STEAH LINE ISOLATION TOTAL NO.CHANNELS OF CHANNELS TO TRIP Hl NIHUH CHANNELS OPERABLE APPLICAOLCX HOOES ACTION a.Hanual b.Au toma t i c Actuation Logic c.Conta inment Pressure--
ii1 IJtl-II I IJIl=d.Steam Flow in Two Steam L i ties-High 1/steam line 1/steam line 1/operating 1, 2, 3 steam line 2 l 2-1,2,3 1,2,3 2)8 IS~16 Four Loops Operating 2/steam line l/steam line 1/steam line any 2 steam lines)4*'iiree Loops OiIerating 2/operating steam line)"']any operating steam line 1/operating steam line)5 TABLE 3.3-3 Continued EHGIHEERED SAFETY FEATURE ACTUATIOH SYSTEM IHSTRUMEHTATIOH FUNCTIONAL UNIT I TOTAL HO.CtNHHELS OF C}tAHttELS TO TRIP MI ttIMUM CHAHHELS OPERABLE APPLICABLE MODES ACTION COINCIDENT WITH EITHER T--Low-Low avg Four Loops Operating Three Loops Operating OR, COINCIDENT WITH Steam Line Pressure-Low 1 Tav/loop 1 Tav/oper-ating loop 2Tany loops in avg any operating loop 1 T any avg 3 loops 1 T in any two operating loops 1, 2, 3" 3PP 14*15 Four Loops Operating Three Loops Operating 5.'CARBINE TRIP 5 FEE DMATER I SOLATIOH 1 pressure/2 pressures loop any loops 1 pressure/1 pressure operating loop in any oper-ating loop 1 pressure any 3 loops 1 pressure in any 2 oper-ating loops 14*15 a.Steam Generator Mater Level-High-High 3/loop 2/loop in any oper-ating loop 2/loop in each oper--ating loop.1, 2, 3 14*
TABLE 3.3-3 (Continued)
TABLE NOTATION¹Trip function may be bypassed in this MODE below P-ll.¹¹Trip function may be bypassed in this MODE below P-12.¹¹¹The channel(s) associated with the protective functions derived from the out of service Reactor Coolant Loop shall be placed in the tripped mode.*The provision of Specification 3.0.4 are not applicable.
ACTION STATEMENTS ACTION 13 With the number of OPERABLE Channels one less than the Total Number of Channels, be in HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />;however, one channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
ACTION 14 With the number of OPERABLE Channels one less than the Total Number of Channels, operations may proceed until performance of the next required CHANNEL FUNCTIONAL TEST provided the inoperable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.ACTION 15 With a channel associated with an operating loop inoperable, restore the inoperable channel to OPERABLE status within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> or be in HOT SHUTDOWN within the following 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />;however, one channel associated with an operating loop may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specif'cation 4.3.2.1.1.
ACTION 16 With the number of OPERABLE Channels one less than the Total Number of Channels, operation may proceed provided the inoperable channel is placed in the bypassed condition and the Minimum Channels OPERABLE requirement is met;one additional channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
D.C.COOK-UNIT 1 3/4 3-22 Amendment No.
TABLE 3.3-3 (Continued)
ACTION 17 With less than the Minimum Channels OPERABLE, operation may continue provided the containment purge and exhaust valves are maintained closed.ACTION 18 With the number of OPERABLE Channels one less than the Total Number of Channels, restore the inoperable channel to OPERABLE status within 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> or be in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.ACTION 19 With the number of OPERABLE channels one less than the Total Number of Channels, STARTUP and/or POWER OPERATION may proceed provided the following conditions are satisfied:
a~The inoperable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.b.The Minimum Channels OPERABLE requirements is met;however, one additional channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.ENGINEERED SAFETY FEATURES INTERLOCKS DESIGNATION CONDITION AND SETPOINT FUNCTION P-11 With 2 of 3 pressurizer pressure channels>1915 psig~P-11 prevents or defeats manual block of safety injection actuation on low pressurizer pressure.P-12 With 3 of 4 T channels 544oF, P-12 prevents or defeats manual block of safety injection actuation high steam line flow and low steam line pressure.With 2 of 4 T channels 540oF~Allows manual block of safety injection actuation on high steam line flow and low steam line pressure.Causes steam line isolation on high steam flow.Affects steam dump blocks.D.C.COOK-UNIT 1 3/4 3-23 Amendment No.
ATTACHMENT NO.4 TO AEP:NRC:0659D DONALD C.COOK NUCLEAR PLANT UNIT NO.2 THE PROPOSED REVISIONS TO UNIT NO.2 TECHNICAL SPECIFICATIONS TABLE 3.3-1 (Continued TABLE NOTATION Kith the reactor trip system breakers in the closed position and the control rod drive system capable of rod withdrawal.
~The channel(s) associated with the protective functions derived from the out of service Reactor Coolant Loop.shall be placed in the tripped condition.
SThe provisions of Specification 3.0.4 are not applicable.
ftHigh voltage to detector may be de-energized above P-6.ACTION STATEMENTS ACTION 1-With the number of channels OPERABLE one less than required by the Minimum Channels OPERABLE requirement, be in HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />;however, one channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.1.1.1.
ACTION 2-With the number of OPERABLE channels one less than the Total Number of Channels, STARTUP and/or POWER OPERATION may proceed provided the following conditions are satisfied:
a.The inonerable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.b.The Minimum Channels OPERABLE requirement is met;however, the inoperable channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testi ng per Specification 4.3.1.1.1.
c.Either, THERMAL POWER is restricted to~75%of RATED THERMAL POWER and the Power Range, Neutron Flux trip setpoint is reduced to~85%of RATED THERMAL POWER within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />;or, the QUADRANT POWER TILT RATIO is monitored at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> per Specification 4.2.4.c..ACTION 3-With the number of channels OPERABLE one less than required by the Minimum Channels OPERABLE requirement and with the THERMAL POWER level: D.C.COOK-UNIT 2 3/4 3-5 Amendment No.
, 4HLE 3.3-1'.Con t inued)Below p 6, restore the inooerable channel to OPERABLE status prior o increasing HER."AL CMER above:he~-6 Setpoint.b.Above rr-5 but below="i of~ATED:HERBAL PCMER, res.ore the incoerable channel=o CPERAHLE status prior to increasing THERMAL POWER above 5."i of MATEO THERMAL POWER.c.Above S'.of RATED THERMAL POWER, POWER OPERAT'.ON may continue.AC, IQN 4-With:he number of channels OPERABLE one less than required by the.'4linimum Channels GPERA8LE reauirement and with the ,HERBAL POWER level: ACi;ON 6 3elow P-6, restore the nooerable channel to OPERAHLE status pr.or to increasing.HERBAL POWER above the P-6 Setpoint.b.Above P-6, ooeration may continue.-With the numoer of channels OPERABLE one less than required by he Min mum Channels~".PERAHLE requirement, verify compliance with the SriUTi QWN~ARCsi",l reouirements of Speci"ication 3.1.1.1 or 3.1.1.2, as aoolicable, with..n 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> and at least once oer 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter.
AC,:"ON 6-Mith the number of OPERABL=channels one less than the Total'fumber of Channels, ARTUP and/or POWER OPERATICt~ay proceed provided the following condit ons are satisfied:
a..ne inooerable channel is placed in".he triooed condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.he Minimum Channels CP RABLE reouiremer.t is met;however, the inoperable channel may be bypassed ror uo to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing of the other channels per Specification 4.3.1.1.1.
AC-.:QN 7-With the number of OPERABLE channels one less than:he.otal Number of Channels, STARTUP and/or POWER OPERA ION may oroceed until performance of the next required CHANNEL FUNCTIONAL TEST provided the inoperable channel is placed in the tr.'oped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.0.C.COOK-UNIT 2 3/4 3-6 Amendment No.
TABLE 3.3-3 Continued)
TABLE NOTATION Trip function may be bypassed in this MODE below P-11.Trip function may be bypassed in this MODE below P-12.The channel(s) associated with the protective functions derived from the out of service Reactor Coolant Loop shall be placed in the tripped mode.*The provision of Specification 3.0.4 are not applicable.
ACTION 13 ACTION 14 ACTION 15 ACTION 16 ACTION STATEMENTS With the number of OPERABLE Channels one less than the Total Number of Channels, be in HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN.wi thin the fol lowing 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />;however, one channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
With the number of OPERABLE Channels one less than the Total Number of Channels, operation may proceed unti 1 performance of the next required CHANNEL FUNCTIONAL TEST provided the inoperable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.With a channel associated with an operating loop inoperable, restore the inoperable channel to OPERABLE status within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> or be in HOT SHUTDOWN within the following 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />;however, one channel associated with an operating loop may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.With the number of OPERABLE Channels one less than the Total Number of Channels, operation may proceed provided the inoperable channel is placed in the bypassed condition and the Minimum Channels OPERABLE requirement is met;one additional channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for su;veillance testing per Specification 4.3.2.1.1.
D.C.COOK-UNIT 2 3/4 3-21 Amendment No.
ATTACHMENT NO.3 TO AEP:NRC:0659D DONALD C.COOK NUCLEAR PLANT UNIT NO.1 THE PROPOSED REVISIONS TO UNIT NO.1 TECHNICAL SPECIFICATIONS 8504050157 850329 PDR ADOCK 05000315 P PDR 0 L J) 3/4.3 INSTRUMENTATION 3/4,3.1 REACTOR TRIP SYST"M INTRUMENTAT:ON LIMITING CONDITION FOR OPERATION 3.3,1.1 As a m'nimum, the reactor trip system instrumentation channels and interlocks of Table 3.3-1 shall be OP RABL with RESPONSE TIMES as shown in Table 3.3-2.APPLICABILITY:
As shown in Table 3.3-1.AC i!QN: As shown in Table 3.3-1.SUR'/E;Li ANCE RE"UiRcMENTS 4.3.1.1.1-Each reac or trip system instrumentation channel shall be demonstra.ed OP BABLE by the performance of the CHANNEL CHECK, CHANNEL CALIBRATION and CHANNEL FUNC IONAL TEST operations for the Moops at tne frequencies snown in able 4.3-1.4.3.1.1.2 The logic for the interlocks shall be demonstrated.
OPeRABLE prior to each reactor star tup unless performed during the preceding 92 days.The total interlock function shall be demonstrated OPERABLE't least once per 18 months during CHANNEL CALIBRATION testing of each channel affected by interlock operation.
4.3.1.1.3 The REACTOR TRIP SYSTEM RESPONSE TiNE of each reactor trip function sha11 be demonstrated to be within its limit at, least once per 18 months.Each test shall include at least one logic train such tha.both logic trains are tested at least once per 36 months and one channel per function such that all channels are tested at least once every N times 18 months where N is the total number of redundant channels in a specific reactor trip function as shown in the"Total No.of Channels" column of Table 3.3-1.0.C.COOK-UN I T 1 3/4 3-1 Amendmene go.
1'ABLE 3.3-2 RL'AC IOR 1 R I I'YSTLH INSTRUHL'NTAT ION RLSVON'SL TIHLS FUNCTIONAI.
UNI I RLSPONSE TIHE 1.Hanual Reactor Trip 2.I'owens Ra>>ge, Neutro>>I'lux NOT AI'I'L I CAIILE<0.5 seconds'.I'ow<<r Ra>>ge, Neutron I Iux, lligli I'os itive Rate NOT A VI'L I CAIILE 4.Power Ra>>ge, Neutron.Flux, Iligli N<<gative Rate 5.Inteonediate Range, N<<ut.ro>>I'lux 6.Source Ra>>ge, Neutro>>I Iux Over tenq)era ture h I 0.Overpower AT 9.I'ressu>izer I'ressure--Low 10.Pressurizer Vressu~e--ll igl>11.Pressurizer Water Level--lligl>
<0.6 seconds" NOT API'L I CAIILE NOT APPL ICAIII E<6.0 seconds'OT Al'VL I CABLE-1.0 seconds<1.0 seco>>ds NOT AVI'I.I CABLE Neutron d<<tectors are exellli)t trolll lespo>>se tlllle testing.Response time of the neutron flux signal portion of the channel shall be measured from detector output or input of first electronic component in channel.0 TABLE 4.3-1 (Continued)
NOTATION With the reactor trip system breakers closed and the control rod drive system capable of rod withdrawal.
(1)(2)If not performed in previous 7 days.Heat balance only, above 15%of RATED THERMAL POWER.Adjust channel if absolute difference
>2 percent.(3)Compare incore to excore axial imbalance above 15%of RATED THERl1AL POWER.Recalibrate if absolute difference
>3 percent.(4)(5)(6)Manual ESF functional input check every 18 months.Each train tested every other month.Neutron detectors may be excluded from CHANNEL CALIBRATION.
(7)-Below P-6 (BLOCK OF SOURCE RANGE REACTOR TRIP)setpoint.D.C.COOK-UNIT 1 3/4 3-14 Amendment No.
INSTRUMENTATION 3/4.3.2 ENGINEERE0 SAFE,Y FEATURE AC UATION SYST=M INSTR"," NTAT'.CN LIMITING CONOITION FOR OPERA;ION 3.3,2,1 The Engineered Safety Feature Actuation System (ESFAS)instrumen a-tion channels and inte.locks shown in Table 3.3-3 shall be OPERABLE with their trip setooints set consistent with the values shown in the Trip Setpoint column of Table 3.3-4 and with RESPONSE TIMES as shown in Table 3.3-5.APPLICAB!LITY:
As shown in Table 3.3-3.ACTION: a.With an ESFAS instrumentation channel trip setpoint less corse.va-tive than the value shown in the Allowable Values column of Table 3.3-4, declare the channel inoperable and apply the applicable ACTION requirement of Table 3.3-3 until the channel is restored to OpERASLE status wi th the trip setpoint adjusted consistent with the Trip Setoint value.b.With an ESFAS instrumentation channel inoperable, take the ACTION shown in Table 3.3-3.SURVEIL'NCE REOUIRE"ENTS 4.3.2.1.1 Each ESFAS instrumentation channel shall be demonstrated OPERASLE by the performance of the CHANNEL CHECK, CHANNEL CALIBRATION and CHANNEL FUNCTIONAL TEST operations for the MODEs and at the frequencies shown in Table 4.3-2.4.3.2.1.2 The logic for the interlocks shall be denonstrated OPERABLE during the automatic actuation logic test.The total interlock funct'on shall be demonstrated OPERABLE at least once per 18 months during CHANNEL CALIBRATION testing of each channel affected by interlock operation.
4.3.2.1.3 The ENGINEEREO SAFETY FEATURES RESPONSE TIME of each ESFAS function shall be demonstrated to be within the limit at least once per 18 months.Each test shall include at least one logic train such that both logic trains are tested at least once per 36 months and one channel per function such that all channels are tested at least once per N times 18 months where N is the total number of redundant channels in a specific ESFAS function as shown in the"Total No.of Channels" Column of Table 3~3 3~0.C.COOK-UNIT 1 3/4 3-15 Amendment No.
TABLE 3.3-3 ENGItlEEREO SAFETY FEATURE ACTUATIOtl SYSTBI ItfSTRUHEtlTATIOll FUtlCTIONAL UNIT TOTAL NO.CIIANtlCI.S Of'llAllllELS TO 1RIP I I I I I I I'fUt1 CllANtlE LS OVERAfJLE APPLICABLE HOOES ACTIOtl b.c Automatic Actuation Logic Containment Pressure-lliqh SAFETY IN J ECTION;TURBINE.TR I P, FEEDWATER ISOLATION, AND HOTOR DR IVEtf I:EEOtCATER PUtlPS.a.!Ianua I Inil.iation 1,2,3,4 1, 2, 3, 4 1,2,3 18 13 14*d.Pressurizer Pressure-Low e.Oifferential Pressure Between Steam Lines-lligh Four Loops Operating Three Loops Operating 3/s team 1 ine 3/operating steam line 2/steam line 2/steam line any steam line 1/steam 2/operating line, any steam line operating steam line 1,2,3lt 1, 2, 3df 14" 15 TABI f.3.3-3 (Continued}
ENGINEEREI)
SAFETY FEATURI'.ACTUA1ION SYSTFH IHSTRUHLNTATION n C3 C)7C I FUNCTIONAL UNIT f.Steam Flow in Two Steam Lines-lligh TOTAL HO.OF CIIANHEI.S CIIAHNE I.S TO TRIP HINIHUH CIIANNELS Of'ENABLE APPI.ICADLE HOnI:S ACTION Four Loops Operating 2/sl.earn line 1/steam line 1/steam line any 2 steam lines 14*Q Q 9 6 0 Tliree Loops Operating COIHC II)f NT Milli L I I IIER T--l.ow-Low avg I our Loops Operating lhree l.oops Operating 2/operating s team I I ne 1 T,/loop avg operating loop I/any operating steam line 2 T , any avg loops 1 Tin fNI any operating loop 1/opera t ing steam line 3 loops 1 T in any avg two operating loops 15 14*15 fhlII.L 3.3-3 (Cr)r)tlrrrred)
,~ltttilNLf'ILff)
SAI t fY FI.Aftlltf; ACI'IIATION SYSlfH lNSTIIUHLNTATION n I:IINCTIONAL UNlr Olt, COlNCII)KNT WITII S tear))L ine I'res sure-I.ow TOTAL NO.CIIANNLLS t)f CIIANNfl.S TO TltlP HlNlHIIH CIIANNf: LS OPLItAIILE AVPIICAIILE HOIIES ACTION L)'f:our Loops Operating TI)ree Loops Operating 2.CONIAlNHI.NI Sf ftAY a.Harrua1 b.Autorr)at fc Actuat.io<<
Logic 1 pr'essure/
1oop 1 pressure/oiler dtillg loop?pressures arly 100ps 1 pressure INN in ar)y oper-a tir)g loop 1 pressure any 3 loops 1 pressure in any 2 operating loops 1,2,3,4 1, 2, 3, 4 14*15 13 c.Cor)ta inment f'ressure--
lli gl)-lli gh 1,2,3 16 R 0 inULL 3.3-3 Continued FNGINEERED SAFfTY FEATURf ACTUATION SYSTFH INSTRUMENTATION FUNCTIONAL UNIT 4.STfAH LINf ISOLATION 10TAL NO.CHANNELS OF CIIANNELS TO TRIP HINIHUH CHANNELS OPERABLE AAPCICAOLEX HOOTS ACTION a.Hanual-b.Automatic Actuation Logic c.Containm<<nt Pressure--
lli gi>-Ili gl)d.Steam Flow in Two Steam Lines-lligh 1,2,3 1,2,3 1/steam line l/steam line 1/operating 1, 2, 3 steam line 2 1 2 18 16 Four Loops Operating 2/steam 1 ine 1/s team 1 ine 1/steam 1 ine any 2 steam 1 ines 14*Tliree Loops OiIera t ing 2/operating steam line I/any operating steam line 1/opera t ing steam line 15 TABLE 3.3-3 Continued ENGINEERED SAFETY FEATURE ACTUATION SYSTEH INSTRUHENTATION FUNCTIONAL UHIT TOTAL HO.CHANNELS OF CHANNELS TO TRIP HIHIHUlh CHANNELS OPERABLE APPLICABLE NODES llCTI OH COINCIDENT MITH EITHER T--Low-Low avg Four Loops Operating Three Loops Operating OR, COIHCIOEHT WITH Steam Line Pressure-Low 1 T/loop 1 T/oper-ating loop 2 Tany loops 1"'T'n n any operating loop 1 T any 3 loops 1T in any avg two operating loops 14*15.Four Loops Operating Three Loops Operating 5.'TURBINE TRIP 5 FEEDWATER ISOLATION 1 pressur e/2 pressures loop any loops 1 pressure/1 pressure operating loop in any oper-ating loop 1 pressure any 3 loops 1 pressure in any 2 oper-ating loops 14*a.Steam Generator Water Level-High-High 3/loop 2/loop in 2/loop in any oper-each oper-ating loop'ating loop 1.2,3 14*
TABLE 3.3-3 (Continued)
TABLE NOTATION gTrip function may be bypassed in this MODE below P-ll.55Trip function may be bypassed in this MODE below P-12.PHOThe channel(s) associated with the protective functions derived from the out of service Reactor Coolant L'oop shall be placed in the tripped mode.*The provision of Specification 3'.4 are not applicable.
ACTION STATEMENTS ACTION 13 With the number of OPERABLE Channels one less than the Total Number of Channels, be in HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />;however, one channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance-testing per Specification 4.3.2.1.1.
ACTION 14 With the number oz OPERABLE Channels one less than the Total Number of Channels, operations may proceed until performance of the next required CHANNEL FUNCTIONAL TEST provided the inoperable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.ACTION 15 With a channel associated with an operating loop inoperable, restore 0he inoperable channel to OPERABLE status within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> or be in HOT SHUTDOWN within the following 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />;however, one channel associated with an operating loop may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specif'cation 4.3.2.1.1.
ACTION 16'With the number of OPERABLE Channels one less than the Total Number of Channels, operation may proceed provided the inoperable channel is placed in the bypassed condition and the Minimum Channels OPERABLE requirement is met;one additional channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
D.C.COOK-UNIT 1 3/4 3-22 Amendment No.
TABLE 3.3-3 (Continued)
ACTION 17-With less than the Minimum Channels OPERABLE, operation may continue provided the containment purge and exhaust valves are maintained closed.ACTION 18 With the number of OPERABLE Channels one less than the Total Number of Channels, restore the inoperable channel to OPERABLE status within 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> or be in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.ACTION 19 With the number of OPERABLE channels one less than the Total Number of Channels, STARTUP and/or POWER OPERATION may proceed prov'ded the following conditions are satisfied:
a~The inoperable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.b.The Minimum Channels OPERABLE requirements is met;however, one additional channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.ENGINEERED SAFETY FEATURES INTERLOCKS DESIGNATION CONDITION AND SETPOINT FUNCTION P-11 With 2 of 3 pressurizer pressure channels>1915 pslgi P-ll prevents or defeats manual block of safety injection actuation on low pressurizer pressure.P-12 With 3 of 4 T channels>544'F.P-12 prevents or defeats manual block of safety injection actuation high steam line flow and low steam line pressure.With 2 of 4 T channels<540oF, Allows manual block of safety injection actuation on high steam line flow and low steam line pressure.Causes steam line isolation on high steam flow.Affects steam dump blocks.D.C.COOK-UNIT 1 3/4 3-23 Amendment No.
ATTACHMENT NO.4 TO AEP:NRC:0659D DONALD C.COOK NUCLEAR PLANT UNIT NO.2 THE PROPOSED REVISIONS TO UNIT NO.2 TECHNICAL SPECIFICATIONS TABLE 3.3-1 (Continued TABLE NOTATION+Mith the reactor trip system breakers in the closed position and the control rod drive system capable of rod withdrawal.
~The channel(s) associated with the protective functions derived from the out of service Reactor Coolant Loop.shall be placed in the tripped condition.
8The provisions of Specification 3.0.4 are not applicable.
HHigh voltage to detector may be de-energized above P-6.ACTION STATEMENTS ACTION 1-With the number of channels OPERABLE one less than required by the Minimum Channels OPERABLE requirement, be in HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />;however, one channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.1.1.1.
ACTION 2-With the number of OPERABLE channels one less than the Total Number of Channels, STARTUP and/or POWER OPERATION may proceed provided the following conditions are satisfied:
a.The inonerable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.b.The Minimum Channels OPERABLE requirement is met;however, the inoperable channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.1.1.1.
c.Either, THERMAL POWER is restricted to~75%of RATED THERMAL POWER and the Power Range, Neutron Flux trip setpoint is reduced to~85K of RATED THERMAL POWER within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />;or, the QUADRANT POWER TILT RATIO is monitored at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> per Specification 4.2.4.c.ACTION 3-With the number of channels OPERABLE one less than required by the Minimum Channels OPERABLE requirement and with the THERMAL POWER level: D.C.COOK-UNIT 2 3/4 3-5 Amendment No.
,ABLE 3.3 1!Continued) a.Below?-6, restore the inoaerabie c.",anne1 to OPERABLE sta us"r',or o increasing HER"AL~OWER above he~-6 Setaoint.b.Above>-6 but below 5"i of?ATEO THERMAL?OWER, res ore the incoerable channel:o OPERABLE status arior a incr eas ng THERMAL POWER above 5,.of MATEO THERMAL?OWER.c.Above"".'l of RATED HERMAL POWER, POWER QPERAT'.ON may continue.AC,IQN 4-Mith the number of channels OPERABLE one less than required by the Minimum Channels OPERABLE reauirement and with the THERMAL?OWER 1evel: ACT'.ON 5 3elow?-6, restore the inooer able channel to OPERABLE status ar.'.or to ir creasing.HER.",AL POWER above the P-6 Setpoint.b.Above?-6, ooerat'.on may continue.-Mith the numaer of channels OPERABLE one less t?'an required by he.colin mum Channels OPERABLE requirement, verify compliance wl h he SHUTDOWN~ARCiIN requirements of Soeci fication 3.1.1, 1 or 3.1.1.2, as aool',cable, with.'n 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> and at least once aer 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter.
AC,'.QN 6-Mi h the~umber af OPERABLE channels one less than.he Total Numoer of Channels, STARTUP and/or POWER OPERATION i'ay oraceed provided the following candit';ons are satisfied:
a..ne inooerabie channel is olaced in he triooed condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.b.'he Minimum Channels t'PERABLE reauiremer,t is met;however, the inoperable channel may be byoasseh for uo to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing of the other channels per Specification 4.3.l.l.l.
AC".:QN i-With the number of OPERABLE channels one less than".he ,otal Number of'hannels, STARTVP and/or POWER OPERATiON may oraceed until Performance of the next required CHANNEL FUNCTIONAL TEST provided the inoperable channel is Placed in the triooed condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.0.C.COOK-UNIT 2 3/4 3-6 Amendment No.
TABLE 3.3-3 Continued)
TABLE NOTATION Trip function may be bypassed in this MODE below P-11.Trip function may be bypassed in this MODE below P-12.The channel(s) associated wi th the protective functions derived from the out, of service Reactor Coolant Loop shall be placed in the tripped mode.*The provision of Specification 3.0.4 are not applicable.
ACTION 13 ACTION 14 ACTION 15 ACTION 16 ACTION STATEMENTS With the number of OPERABLE Channels one less than the Total Number of Channels, be in HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN.within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />;however, one channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
With the number of OPERABLE Channels one less than the Total Number of Channels, operation may proceed until performance of the next required CHANNEL FUNCTIONAL TEST provided the inoperable channel is placed in the tripped condition within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.With a channel associated with an operating loop inoperable, restore the inoperable channel to OPERABLE status within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> or be in HOT SHUTDOWN within the following 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />;however, one channel associated with an operating loop may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
With the number of OPERABLE Channels one less than the Total Number of Channels, operation may proceed provided the inoperable channel i s placed in the bypassed condition and the Minimum Channels OPERABLE requirement is met;one additional channel may be bypassed for up to 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> for surveillance testing per Specification 4.3.2.1.1.
D.C.COOK-UNIT 2 3/4 3-21 Amendment No.