ML040020040

to Third Interval Inservice Inspection Plan, McGuire Nuclear Station, Units 1 and 2, General Requirements Through Unit 1, Section 2

ML040020040
Person / Time
Site:	Mcguire, McGuire
Issue date:	12/09/2003
From:	Scarboro G Duke Power Co
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML040020040 (337)

Text

THIRD INTERVAL INSERVICE INSPECTION PLAN McGUIRE NUCLEAR STATION UNITS 1 AND 2 GENERAL REQUIREMENTS REVISION 0 Duke Potwersm A Duke Energy Company Prepared By: Date /Z30 Reviewed By: co - Date z Approved By: J Date / 3/Q3 V

ANII Review: D ate /c); 0L3 Inservice Inspection Plan G. J. Underwood Phone: (704)382-6100 Email:gjunderwood duke-energy.com

"- McGuire Nuclear Station G. D. Scarboro Phone: (704)382-0121 Email:gdscarbo~duke-energy.com General Requirements

McGUIRE NUCLEAR STATION GENERAL INFORMATION McGuire Nuclear Station's Inservice Inspection Plan for the third interval is comprised of three separate McGuire Nuclear Station's Inservice Inspection Plan for the third interval is comprised of three separate volumes: General Requirements, Unit 1, and Unit 2.

Location: 12700 Hagers Ferry Road, Huntersville, North Carolina 28078-9340 Commercial Service Date: McGuire Unit 1 December 1,1981 Third Interval Start Date: McGuire Unit 1 December 1, 2001 Commercial Service Date: McGuire Unit 2 March 1,1984 Third Interval Start Date: McGuire Unit 2 March 1, 2004 Owner: Duke Energy Corporation 526 South Church St.

Mail Code EC07J Charlotte, N. C. 28201-1006 Inservice Inspection Plan General Information McGuire Nuclear Station Revision 0 General Requirements Page 1 of 1

TABLE OF CONTENTS GENERAL REQUIREMENTS SECTION TITLE REVISION

1. Applicable Codes and Standards for Inservice Inspection 0

2. System Boundaries Subject to Inspection 0

3. Inspection Methods and Procedures to be Used for Inservice 0 Inspection

4. Description of Inservice Inspection Plan for ASME Class 1 Items 0

5. Description of Inservice Inspection Plan for ASME Class 2 Items 0

6. Description of Inservice Inspection Plan for ASME Class 3 Items 0

7. Description of Augmented Inservice Inspection Plan 0

8. Description of Examination Listings 0

9. Requests for Relief From ASME Code Requirements 0

10. Calibration Standards 0 Inservice Inspection Plan Table of Contents McGuire Nuclear Station Revision 0 General Requirements Page 1 of 2

TABLE OF CONTENTS UNIT 1 SECTION TITLE REVISION

1. McGuire Unit 1 Inservice Inspection Examination Listing and Schedule 0

2. McGuire Unit 1 Inservice Inspection - Reference Drawings 0 UNIT 2 SECTION TITLE REVISION

1. McGuire Unit 2 Inservice Inspection Examination Listing and Schedule 0

2. McGuire Unit 2 Inservice Inspection - Reference Drawings 0 Inservice Inspection Plan Table of Contents McGuire Nuclear Station Revision 0 General Requirements Page 2 of 2

1.0 Applicable Codes and Standards for Inservice Inspection In accordance with the requirements of Paragraph 50.55a(g) of 10CFR Part 50(Federal Register effective date November 22, 1999), the inservice inspection of McGuire Nuclear Station Unit 1 for the first inspection period (outages 1 and 2) was performed in accordance with Inspection Program B of the 1995 Edition of ASME Section XI, thru the 1996 Addenda, with the exception of paragraph IWB-1220, which was performed in accordance with the 1989 Edition of ASME Section Xl as required per Paragraph 50.55a(b)(2)(xi) of 10CFR Part 50. The ultrasonic examination of similar metal piping welds and bolting was performed in accordance with Appendix VIII of the 1995 Edition of ASME Section Xl, thru the 1996 Addenda. All examinations were performed to the extent practicable within the limitations of design, geometry and materials of construction of the component.

In accordance with the requirements of Paragraph 50.55a(g) of 10CFR Part 50 (Federal Register effective date October 28, 2002), the inservice inspection for the second and third inspection periods of Unit 1 and all three inspection periods of Unit 2 at McGuire Nuclear Station will be performed in accordance with Inspection Program B of the 1998 Edition of ASME Section Xl, thru the 2000 Addenda, hereafter referred to as Section Xl, subject to the following limitations and modifications.

• Paragraph IWB-1 220, which will be performed in accordance with the 1989 Edition of ASME Section Xl as required per Paragraph 50.55a(b)(2)(xi) of 10CFR Part 50.

• Paragraph IWB-2500-1, Examination Category B-D (Items B3.120 and B3.140) will be performed as required per Paragraph 50.55a(b)(2)(xxi)(A) of 10CFR Part 50. This paragraph allows a VT examination with enhanced magnification to be performed in lieu of the UT examination. The September 26, 2002 publication of the Federal Register provides details on the VT examination option. An enhanced VT examination will be performed only when the inner radius surface is accessible. When the inner radius surface is not accessible, a UT examination will be performed in accordance with the 1998 Edition of ASME Section Xl.

• Paragraph IWB-2500-1, Examination Category B-G-2 (Item B7.80) will be performed in accordance with the 1995 Edition of ASME Section XI as required per Paragraph 50.55a(b)(2)(xxi)(B) of 10CFR Part 50. The September 26, 2002 publication of the Federal Register requires a VT-1 examination on bolting that is to be reused only.

• Paragraph IWB-2500-1, Examination Category B-K (Item B10.10) will be performed in accordance with the 1995 Addenda of ASME Section Xl as required per Paragraph 50.55a(b)(2)(xxi)(C) of 10CFR Part 50.

All examinations will be performed to the extent practicable within the limitations of design, geometry and materials of construction of the component.

Inservice Inspection Plan Section 1 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 4

1.1 Additional Codes and Standards Used Inspections performed in addition to those required by Section Xl are described in Section 7 of this plan. The following codes and standards apply to these inspections:

1.1.1 Reactor coolant pump flywheels will be inspected as required by the Technical Specifications for McGuire Nuclear Station.

1.1.2 Steam generator tubing will be inspected as required by Section Xl and the Technical Specifications for McGuire Nuclear Station. The Nuclear G.O. Metallurgy and Lab Services/Nuclear Service Division has overall responsibility for this inspection.

1.1.3 The manual UT examination of the reactor vessel closure head to flange, and shell-to-flange weld, from the flange seal surface, will be inspected in accordance with USNRC Regulatory Guide 1.150, Revision 1.

1.1.4 Augmented examinations on certain systems or components will be performed in accordance with the governing commitment as described in Section 7.

1.2 Code Cases Applicable to the ASME Boiler and Pressure Code Section Xl The following Code Cases will be used for the McGuire Units 1 and 2 Third Interval Inservice Inspection Program:

1.2.1 Code Case N-460 "Alternative Examination Coverage for Class 1 and Class 2 Welds." (This Code Case is approved for use under Regulatory Guide 1.147, Revision 13.)

1.2.2 Code Case N-463-1: "Evaluation Procedures and Acceptance Criteria for Flaws In Class 1 Ferritic Piping That Exceed The Acceptance Standards Of IWB-3514.2." (This code case is approved for use under Regulatory Guide 1.147, Revision 13.)

1.2.3 Code Case N-545 "Alternate Requirements for Conduct of Performance Demonstration Detection Test of Reactor Vessel, Section Xl, Division 1." (This code case is approved for use under Regulatory Guide 1.147, Revision 13.)

1.2.4 Code Case N-639 "Alternate Calibration Block Material, Section Xl, Division 1."

(This code case is approved for use under Regulatory Guide 1.147, Revision 13.)

Inservice Inspection Plan Section 1 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 4

item numbers the Code Listed below is the Code Case (Bold), Examination Categories (italicized), and Case can be applied to:

N-460 coverage to be Class 1 and 2 pressure vessels and piping welds when limitations cause examination less than 100% but greater than 90%.

B-A B-B B-D B-F B-J B-K B-O C-A C-B C-C CF-1 CF-2 B5.10 B9.11 B10.10 B14.10 C1.10 C2.10 C3.10 C5.11 C5.51 B1.11 B2.11 B3.90 B5.20 B9.21 B10.20 C1.20 C2.11 C3.20 C5.21 C5.61 B1.12 B2.12 B3.110 B5.30 B9.31 B10.30 C1.30 C2.21 C3.30 C5.30 C5.70 B1.21 B2.21 B3.130 B5.40 B9.32 610.40 C2.22 C3.40 C5.41 C5.81 61.22 B2.31 B3.150 B1.30 62.40 B3.160 B5.50 B9.40 B1.40 B2.51 B5.60 62.60 65.70 62.80 B5.80 B5.90 B5.100

_ _ __ __ __ __ _ _ _ __ _ _ _ _ B 5.1 1 0 _ _ _ _ _ _ _ _ _

N-463-1 Class 1 ferritic piping welds N-545 Class 1 welds in the reactor pressure vessel B-A B-D B1.11 B1.12 63.90}

B1.21 B1.22 B1.30 B1.40 N-639 Class 1 and 2 welds in ferritic pressure vessels B-A B-B B-D C-A C-B B1.11 B2.11 B3.90 C1.10 C2.10 B1.12 B2.12 B3.110 C1.20 C2.11 B1.21 B2.21 B3.130 C1.30 C2.21 B1.22 B2.31 B3.150 C2.22 B1.30 B2.40 63.160 B1.40 B2.51 B2.60 62.80 i~

Section 1 Inservice Inspection Plan Revision 0

'~ McGuire Nuclear Station Page 3 of 4 General Requirements

1.3 Applicable Duke Power Administrative Procedures The following Duke Power procedures will be used to control preservice inservice inspection activities and inservice inspection plans I reports:

PROCEDURE NO. TITLE NSD-300 "ASME Section Xl Program" NSD-701 "Records Management" NSD-702 "Document Management" NSD-800 "Software and Data Quality Assurance (SDQA) Program" QA-502 "Digitization and Optical Storage of Records" QA-513 "Preparation and Implementation of ASME Section Xl Inservice Inspection Plans Including Requirements for Augmented and Elective Examinations" QA-516 "Evaluation of SI Indications" QA-520 "Preparation and Distribution of Inservice Inspection Reports" QAL-5 "Control of Preservice and Inservice Inspection Activities" SDQA-301 77-NGO "ISIDBMS (Inservice Inspection Database Management System)"

Inservice Inspection Plan Section 1

'~' McGuire Nuclear Station Revision 0 General Requirements Page 4 of 4

2.0 System Boundaries Subject to Inspection The boundaries of Class 1, 2, and 3 non-exempt systems are shown on the ISI NDE boundary drawings listed in Section 2 of the unit specific volumes. Unless otherwise noted, systems designated as Class A are equivalent to Class 1, Class B are equivalent to Class 2, and Class C are equivalent to Class 3.

2.1 Class 1 Components Exempt From Examination 2.1.1 Components that are connected to the reactor coolant system and part of the reactor coolant pressure boundary, and that are of such a size and shape so that upon postulated rupture the resulting flow of coolant from the reactor coolant system under normal plant operating conditions is within the capacity of make up systems which are operable from on-site emergency power. Reference Section Xl, Paragraph IWB-1220(a).

2.1.2 Piping of NPS 1" and smaller, except for steam generator tubing. Reference Section Xl, Paragraph IWB-1220(b) (1).

2.1.3 Components and their connections in piping of NPS 1" and smaller. Reference Section Xl, Paragraph IWB-1220(b) (2).

2.1.4 Reactor vessel head connections and associated piping, NPS 2" and smaller, made inaccessible by control rod drive penetrations. Reference Section Xl, Paragraph IWB-1220(c).

2.2 Class 2 Components Within RHR, ECC, and CHR Systems or Portions of Systems Exempt From Examination 2.2.1 Vessels, piping, pumps, valves, and their connections in piping NPS 4" and smaller in all systems except high pressure safety injection systems. Reference Section Xl, Paragraph IWC-1221(a) (1) (2).

2.2.2 Vessels, piping, pumps, valves, and their connections in piping NPS 11/2" and smaller in high pressure safety injection systems. Reference Section Xl, Paragraph IWC-1 221 (b) (1) (2).

2.2.3 Vessels, piping, pumps, valves, and other components and their connections of any size in statically pressurized, passive (i.e., no pumps) safety injection systems.

Reference Section Xl, Paragraph IWC-1 221 (c).

2.2.4 Piping and other components of any size beyond the last shutoff valve in open ended portions of systems that do not contain water during normal plant operation. Reference Section Xl, Paragraph IWC-1 221 (d).

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 4

2.3 Class 2 Components Within Systems or Portions of Systems Other Than RHR, ECC, and CHR Exempt From Examination 2.3.1 For systems except auxiliary feedwater systems: vessels, piping, pumps, valves, and their connections in piping NPS 4" and smaller. Reference Section Xl, Paragraph IWC-1222(a) (1) (2).

2.3.2 For auxiliary feedwater systems: vessels, piping, pumps, valves, and their connections in piping NPS 11/2" and smaller. Reference Section XI, Paragraph WC-1222(b) (1) (2).

2.3.3 Vessels, piping, pumps, valves, other components, and component connections of any size in systems or portions of systems that operate (when the system function is required) at a pressure equal to or less than 275 psig and at a temperature equal to or less than 2000 F. Reference Section Xl, Paragraph IWC-1222(c).

2.3.4 Piping and other components of any size beyond the last shutoff valve in open ended portions of systems that do not contain water during normal plant operating conditions.

Reference Section Xl, Paragraph IWC-1222(d).

2.4 Class 2 Inaccessible Welds Exempt From Examination 2.4.1 Welds or portions of welds that are inaccessible due to being encased in concrete, buried underground, located inside a penetration, or encapsulated by guard pipe.

Reference Section Xl, Paragraph IWC-1223.

2.5 Class 3 Components Exempt From Examination 2.5.1 Vessels, piping, pumps, valves, and their connections in piping NPS 4" and smaller.

Reference Section XI, Paragraph IWD-1220(a) (b).

2.5.2 Components that operate at a pressure of 275 psig or less and at a temperature of 2000 F or less in systems (or portions of systems) whose function is not required in support of reactor residual heat removal, containment heat removal, and emergency core cooling.

Reference Section XI, Paragraph IWD-1220(c).

2.5.3 Welds or portions of welds that are inaccessible due to being encased in concrete, buried underground, located inside a penetration, or encapsulated by guard pipe.

Reference Section XI, Paragraph IWD-1220(d).

2.6 Class 1, 2, and 3 Supports Exempt From Examination 2.6.1 Supports exempt from the examination requirements of IWF-2000 are those connected to components and other items exempted from examination by IWB-1 220, IWC-1 220, and IWID-1220. In addition, portions of supports that are inaccessible by being encased in concrete, buried underground, or encapsulated by guard pipe are also exempt from Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 4

the examination requirements of IWF-2000. Reference Section Xi, Paragraph IWF-1230.

2.7 Examination Boundaries Section 2 of the Unit specific volumes contain a listing of flow diagrams that are color-coded to identify the NDE examination required on each portion of the system. The code used for NDE examinations are described below:

Red Class 1 system, not exempted Yellow Class 2 system, not exempted Green Class 3 system, not exempted Blue System (or portions of systems) exempt from examination Revisions to the plant system flow diagrams are reviewed for additions/changes to the ISI boundaries. These additions/changes are incorporated into the ISI NDE boundary drawings and the ISI plan as necessary. The original marked-up ISI NDE boundary drawings are maintained in the General Office. Controlled copies will be issued as required by Document Management.

2.8 Inspection Interval and Inspection Periods Reference Section 8.0 for a matrix of end of cycle vs. outage nomenclature.

Third Inspection Interval Unit 1 Start Date End Date 12/01/2001 12/01/2004 12/01/2008 12/01/2011 1st Period 2nd Period 3rd Period Outage 1 (EOC 15) Outage 3 (EOC 17) Outage 6 (EOC 20)

Outage 2 (EOC 16) Outage 4 (EOC 18) Outage 7 (EOC 21)

Outage 5 (EOC 19)

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 General Requirements Page 3 of 4

Third Inspection Interval Unit 2 Start Date End Date 03/01/2004 03/01/2007 03/01/2011 03/01/2014 1st Period 2nd Period 3rd Period Outage 1 (EOC 16) Outage 3 (EOC 18) Outage 6 (EOC 21)

Outage 2 (EOC 17) Outage 4 (EOC 19) Outage 7 (EOC 22)

Outage 5 (EOC 20)

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 General Requirements Page 4 of 4

3.0 Inspection Methods and Procedures to Be Used for Inservice Inspection Inservice inspection of McGuire Units 1 and 2 will be performed using procedures which comply with the requirements of the applicable codes referenced in Section 1 of this plan. Volumetric, surface, and visual methods of inspection will be used as required. Each inspection will be performed under the QA Program of the organization performing the inspection.

A specific examination procedure is referenced for each inspection method listed in Section 8 of this plan. The procedures referenced are found in the Duke Power Company Procedure Manuals and the latest revision of each procedure that has been approved by Duke Power Company for McGuire Nuclear Station Units 1 and 2 will be used. Any vendor procedures to be used, must be reviewed and approved by QA Technical Services/Nuclear Assurance Division.

3.1 Volumetric Inspection Volumetric inspection will be performed by manual and/or automated ultrasonic methods, except in some cases where ultrasonic methods are not practical. Radiographic examinations will be used in these cases in lieu of ultrasonic examinations. Inspection of reactor vessel welds will be performed using an automated ultrasonic inspection device.

Steam generator tubing will be examined using eddy current inspection methods as outlined in the McGuire Technical Specifications. The Nuclear G.O. Metallurgy and Lab Services/Nuclear Service Division has overall responsibility for implementing and reporting any inspections pertaining to the steam generator tubes.

3.2 Surface Inspection Surface inspection will be performed using either the liquid penetrant or magnetic particle method. The liquid penetrant method will be used for all surface inspections on austenitic steel and may also be used on ferritic steel. The magnetic particle method will only be used on ferritic steel.

3.3 Visual Inspection Inservice visual inspections will be performed using direct methods where practical. Remote visual examinations may be used in some cases. Enhanced visual methods may be used in lieu of ultrasonics for some examinations.

3.4 Pressure Testing Inservice inspection pressure testing requirements will be addressed in the McGuire Nuclear Station Inservice Inspection Pressure Test Plan. The Inservice Inspection Plan Manager/

Pressure Testing will be responsible for all testing and reporting under this program.

Inservice Inspection Plan Section 3 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 4

3.5 Snubber Testing Inservice testing and inspection of snubbers (IWF-5000) will be performed per Selected Licensee Commitments, Section 16.9.15. The McGuire Mechanical Services Group will be responsible for all testing, inspecting, and reporting under this program.

3.6 Containment Vessel Inspection Inservice inspection requirements for the steel containment vessel are specified in the McGuire Nuclear Station Containment Inservice Inspection Plan (Document Number MC-1042-CISI-0001). The Nuclear Technical Services/NGO Materials & Aging Management Section will be responsible for all testing and reporting under this program.

3.7 Inspection Procedures The following procedures will be used for the inservice inspection of McGuire Units 1 and 2:

PROCEDURE NO. TITLE NDE-12 "General Radiography Procedure for Preservice and Inservice Inspection" NDE-25 "Magnetic Particle Examination" NDE-35 "Liquid Penetrant Examination" NDE-310 "Ultrasonic Examination of Dissimilar Metal Piping Welds Using Refracted Longitudinal and Shear Waves at McGuire Unit 1" NDE-340 "Ultrasonic Examination Using Longitudinal Wave and Shear Wave Straight Beam Techniques at McGuire Unit 1" NDE-350 "Ultrasonic Examination of Reactor Pressure Vessel Flange to Shell Welds at McGuire Nuclear Station Unit 1" NDE-360 "Ultrasonic Examination of Reactor Pressure Vessel Head to Flange Welds at McGuire Unit 1" NDE-600 "Ultrasonic Examination of Similar Metal Welds in Ferritic and Austenitic Piping" NDE-620 "Ultrasonic Examination of Welds in Ferritic Pressure Vessels Greater Than 2 Inches in Thickness" NDE-640 "Ultrasonic Examination Using Longitudinal Wave and Shear Wave Straight Beam Techniques" NDE-670 "Ultrasonic Sizing of Planar Flaws in Ferritic and Austenitic Steels" Inservice Inspection Plan Section 3 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 4

PROCEDURE NO. TITLE NDE-680 "Ultasonic Examination of Nozzle Inner Radius Sections in Ferritic Pressure Vessels" NDE-940 "Ultrasonic Thickness Measurement and Stud Location" NDE-946 "Ultrasonic Thickness Measurement For Erosion/Corrosion Examinations" NDE-947 "Ultrasonic Examination Of Steam Generator Manway Studs at McGuire Units 1 and 2 and Catawba Unit 1" NDE-949 "Ultrasonic Examination of Reactor Coolant Pump Flywheels at McGuire and Catawba Nuclear Stations" NDE-951 "Ultrasonic Thickness Measurement of Metallic Containment Structures" NDE-995 "Ultasonic Examination of Small Diameter Piping for Thermal Fatigue" NDE-2047 "Ultrasonic Examination of Steam Generator Manway Studs at McGuire Units 1 and 2 and Catawba Unit 1" NDE-2052 "Ultrasonic Examination of Pressurizer Support Skirt Welds" NDE-2080 "Steam Generator Main Feedwater Nozzle Inner Radius Ultrasonic Examination at McGuire Unit 1" NDE-2090 "Ultrasonic Examination of Small Diameter Thin Wall Piping" NDE-3620 "Ultrasonic Examination of Nozzle to Vessel Welds in Ferritic Pressure Vessels Greater Than 2 Inches in Thickness" (1998 Edition thru 2000 Addenda)

NDE-3630 "Ultrasonic Examination of Welds in Pressure Vessels 2 Inches and Less in Thickness" (1998 Edition thru 2000 Addenda)

NDE-3650 "Ultrasonic Examination of Reactor Pressure Vessel Flange to Shell Welds" (1998 Edition thru the 2000 Addenda)

NDE-3660 "Ultrasonic Examination of Reactor Pressure Vessel Head to Flange Welds" (1998 Edition thru 2000 Addenda)

PDI-UT-1 "PDI Generic Procedure for the Ultrasonic Examination of Ferritic Pipe Welds" Inservice Inspection Plan Section 3 McGuire Nuclear Station Revision 0 General Requirements Page 3 of 4

PROCEDURE NO. TITLE PDI-UT-2 "PDI Generic Procedure for the Ultrasonic Examination of Austenitic Pipe Welds" PDI-UT-3 "PDI Generic Procedure for Ultrasonic Through Wall Sizing In Pipe Welds" PDI-UT-5 "PDI Generic Procedure for Straight Beam Ultrasonic Examination of Bolts and Studs" PDI-UT-6 "PDI Generic Procedure for the Manual Ultrasonic Examination of Reactor Pressure Vessel Welds" PDI-UT-7 "PDI Generic Procedure for the Manual Ultrasonic Through Wall and Length Sizing of Ultrasonic Indications in Reactor Pressure Vessel Welds" PDI-UT-1 0 "PDI Generic Procedure for the Ultrasonic Examination of Dissimilar Metal Piping Welds" 54-ISI-1 06 "Remote Ultrasonic Examination of Reactor Vessel and Associated Piping Welds Using Remote Manipulators and the ACCUSONEX Acquisition and Analysis System" 54-ISI-800 "Remote Ultrasonic Examination of Reactor Vessel Welds in Accordance with ASME Section Xl, Appendix VIII, Supplements 4 and 6" QAL-13 "ISI Visual Examination, VT-1" CAL-14 "ISI Visual Examination, VT-3"

, Inservice Inspection Plan Section 3 McGuire Nuclear Station Revision 0 General Requirements Page 4 of 4

4.0 Description of Inservice Inspection Plan for ASME Class 1 The inservice inspection of ASME Class 1 items shall be performed in accordance with the requirements of Article IWB-2000 of Section Xi. Specific examination listings and schedules are described in Section 8. A detailed listing and schedule of each examination is shown in Section 1 of the Unit 1 and Unit 2 Volumes. Class 1 examinations were scheduled for the third inspection interval in accordance with the following table from Section Xl, Inspection Program B.

Table IWB-2412-1 Inspection Inspection Period, Minimum Maximum Interval Calendar Years of Examinations Examinations Plant Service Within Completed, % Credited, %

the Interval [Note 1]

3rd 3 16 50 7 50 75

____________ 10 100 100 Note 1: If the first period completion percentage for any examination category exceeds 34%, at least 16% of the required examinations shall be performed in the second period.

4.1 Examination Categories and Requirements The examination categories to be used are those listed in Table IWB-2500-1 of Section Xl.

Specific examinations will be identified by an item number similar to those listed in Table IWB-2500-1 of Section Xl, plus an additional number to uniquely identify that examination.

(Example: B01.01 1.001) Class 1 items to be inspected:

Category B-A Pressure Retaining Welds In Reactor Vessel IWB-2500-1 Component To Be Examined Comments Item No.

B1 .10 Shell Welds B1.11 Circumferential B1.12 Longitudinal N/A for McGuire 2 B1.20 Head Welds B1.21 Circumferential Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 11

Category B-A (c:ont.)

IWB-2500-1 Component To Be Examined Comments Item No.

B1.22 Meridional B1.30 Shell-to-Flange Weld B1.40 Head-to-Flange Weld B1.50 Repair Welds B1.51 Beltline region N/A for McGuire 1& 2 Category B-B Pressure Retaining Welds In Vessels Other Than Reactor Vessels IWB-2500-1 Component To Be Examined Comments Item No.

Pressurizer B2.10 Shell-to-Head B2.11 Circumferential B2.12 Longitudinal B2.20 Head Welds B2.21 Circumferential N/A for McGuire 1& 2 B2.22 Meridional N/A for McGuire 1& 2 Steam Generators (Primary Side)

B2.30 Head Welds B2.31 Circumferential N/A for McGuire 1& 2 B2.32 Meridional N/A for McGuire 1& 2 B2.40 Tubesheet-to-Head Weld Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 11

Category B-B (cont.)

IWB-2500-1 Component To Be Examined Comments Item No.

Heat Exchangers (Primary Side) - Head B2.50 Head Welds B2.51 Circumferential N/A for McGuire 1& 2 B2.52 Meridional N/A for McGuire 1& 2 Heat Exchangers (Primary Side) - Shell B2.60 Tubesheet-to-Head Welds N/A for McGuire 1& 2 B2.70 Longitudinal Welds N/A for McGuire 1& 2 B2.80 Tubesheet-to-Shell Welds N/A for McGuire 1& 2 Category B-D Full Penetration Welded Nozzles In Vessels - Inspection Program B IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel B3.90 Nozzle-to-Vessel Welds B3.100 Nozzle Inside Radius Section Pressurizer B3.1 10 Nozzle-to-Vessel Welds B3.120 Nozzle Inside Radius Section Reference General Requirements Section 1.0 Steam Generators (Primary Side)

B3.130 Nozzle-to-Vessel Welds N/A for McGuire 1& 2 B3.140 Nozzle Inside Radius Section Reference General Requirements Section 1.0 Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 3 of 11

Category B-D (cont.)

IWB-2500-1 Component To Be Examined Comments Item No.

Heat Exchangers (Primary Side)

B3.150 Nozzle-to-Vessel Welds N/A for McGuire 1& 2 B3.160 Nozzle Inside Radius Section N/A for McGuire 1& 2 Category B-F Pressure Retaining Dissimilar Metal Welds in Vessel Nozzles IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel 85.10 NPS 4 or Larger Reference RFR 01-005 Nozzle-to-Safe End Butt Welds B5.20 Less Than NPS 4 Reference RFR 01-005 Nozzle-to-Safe End Butt Welds 85.30 Nozzle-to-Safe End Socket Welds Reference RFR 01-005 Reference RFR 01-008 Pressurizer B5.40 NPS 4 or Larger Reference RFR 01-005 Nozzle-to-Safe End Butt Welds B5.50 Less Than NPS 4 Reference RFR 01-005 Nozzle-to-Safe End Butt Welds 85.60 Nozzle-to-Safe End Socket Welds Reference RFR 01-005 Reference RFR 01-008 Steam Generator B5.70 NPS 4 or Larger Reference RFR 01-005 Nozzle-to-Safe End Butt Welds B5.80 Less Than NPS 4 Reference RFR 01-005 Nozzle-to-Safe End Butt Welds B5.90 Nozzle-to-Safe End Socket Welds Reference RFR 01-005 Reference RFR 01-008 Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page4of 11

Category B-F (cont.)

IWB-2500-1 Component To Be Examined Comments Item No.

Heat Exchangers B5.100 NPS 4 or Larger Reference RFR 01 -005 Nozzle-to-Safe End Butt Welds B5.110 Less Than NPS 4 Reference RFR 01-005 Nozzle-to-Safe End Butt Welds B5.120 Noz;zle-to-Safe End Socket Welds Reference RFR 01-005 Reference RFR 01-008 Category B-G-1 Pressure Retaining Bolting, Greater Than 2 in. In Diameter IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel B6.10 Closure Head Nuts B6.20 Closure Studs, in place Closure studs are examined when removed, see B6.30 B6.30 Closure Studs, when removed B6.40 Threads in Flange B6.50 Closure Washers, Bushings Pressurizer B6.60 Bolts and Studs N/A for McGuire 1&2 B6.70 Flange Surface, when connection N/A for McGuire 1& 2 disassembled B6.80 Nuts, Bushings, and Washers N/A for McGuire 1& 2 Steam Generators B6.90 Bolts and Studs B6.100 Flange Surface, when connection disassembled Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 5 of 11

Category B-G-1 (cont.)

IWB-2500-1 !Component To Be Examined Comments Item No.

B6.1 10 Nuts, Bushings, and Washers Heat Exchangers B6.120 Bolts and Studs N/A for McGuire 1& 2 B6.130 Flange Surface, when connection N/A for McGuire 1& 2 disassembled B6.140 Nuts, Bushings, and Washers N/A for McGuire 1& 2 Piping B6.150 Bolts and Studs N/A for McGuire 1& 2 B6.160 Flange Surface, when connection N/A for McGuire 1& 2 disassembled B6.170 Nuts, Bushings, and Washers N/A for McGuire 1& 2 Pumps B6.180 Bolts and Studs B6.190 Flange Surface, when connection disassembled B6.200 Nuts, Bushings, and Washers N/A for McGuire 2 Valves B6.21 0 Bolts and Studs N/A for McGuire 1& 2 B6.220 Flange Surface, when connection N/A for McGuire 1& 2 disassembled B6.230 Nuts, Bushings, and Washers N/A for McGuire 1& 2 Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 6 of 11

Category B-G-2 Pressure Retaining Bolting, 2 in. And Less In Diameter IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel B7.10 Bolts, Studs, and Nuts N/A for McGuire 1& 2 Pressurizer B7.20 Bolts, Studs, and Nuts Steam Generators B7.30 Bolts, Studs, and Nuts N/A for McGuire 1& 2 Heat Exchangers B7.40 Bolts, Studs, and Nuts N/A for McGuire 1& 2 Piping B7.50 Bolts, Studs, and Nuts Pumps B7.60 Bolts, Studs, and Nuts Valves B7.70 Bolts, Studs, and Nuts CRD Housing B7.80 Bolts, Studs, and Nuts Reference General Requirements Section 1.0 Category B-J Pressure Retaining Welds In Piping IWB-2500-1 Component To Be Examined Comments Item No.

B9.10 NPS 4 or Larger B9.11 Circumferential Welds Reference RFR 01-005 B9.20 Less Than NPS 4 Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 7 of 11

Category B-J (cont.)

IWB-2500-1 Component To Be Examined Comments Item No.

B9.21 Circ IAmferential Welds Reference RFR 01-005 B9.30 Bral Iich Pipe Connection Welds B9.31 NPE 4 or Larger Reference RFR 01-005 B9.32 Les, sThan NPS 4 Reference RFR 01-005 B9.40 Socl<et Welds Reference RFR 01-005 Reference RFR 01-008 Category B-K Welded Attachments For Vessels, Piping, Pumps, And Valves IWB-2500-1 Component To Be Examined Comments Item No.

Pressure Vessels B10.10 Welded Attachments Piping B10.20 Welded Attachments Pumps B10.30 Welded Attachments N/A for McGuire 1& 2 Valves B10.40 Welded Attachments N/A for McGuire 1& 2 Category B-L-1 Pressure Retaining Welds In Pump Casings B-M-1 Pressure Retaining Welds In Valve Bodies B-L-2 Pump Casings B-M-2 Valve Bodies IWB-2500-1 Component To Be Examined Comments Item No.

Pumps B12.10 Pump Casing Welds (B-L-1) N/A for McGuire 1& 2 Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 8 of 11

Category B-L-1, B-M-1, B-L-2, and B-M-2 (cont.)

IWB-2500-1 Component To Be Examined Comments Item No.

B12.20 Pump Casing (B-L-2)

Valves B12.30 Valves, Less Than NPS 4 N/A for McGuire 1& 2 Valve Body Welds (B-M-1) 812.40 Valves, NPS 4 or Larger N/A for McGuire 1& 2 Valve Body Welds (B-M-1)

B12.50 Valve Body, Exceeding NPS 4 (B-M-2)

Category B-N-1 Interior Of Reactor Vessel B-N-2 Welded Core Support Structures And Interior Attachments To Reactor Vessels B-N-3 Removable Core Support Structures IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel B13.10 Vessel Interior (B-N-1) Examine Once Each Period Reactor Vessel (PWR)

B13.50 Interior Attachments Within N/A for McGuire 1& 2 Beltline Region (B-N-2)

B13.60 Interior Attachments Beyond Beltline Region (B-N-2)

B13.70 Core Support Structure (B-N-3)

Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 9 of 11

Category B-O Pressure Retaining Welds In Control Rod Housings IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel B14.10 Welds in CRD Housing Category B-P All Pressure Retaining Components IWB-2500-1 Component To Be Examined Comments Item No.

Reactor Vessel B15.10 Pressure Retaining Boundary Reference Section 3.4 Pressurizer B15.20 Pressure Retaining Boundary Reference Section 3.4 Steam Generators B1 5.30 Pressure Retaining Boundary Reference Section 3.4 Heat Exchangers B15.40 Pressure Retaining Boundary Reference Section 3.4 Piping B15.50 Pressure Retaining Boundary Reference Section 3.4 Pumps B1 5.60 Pressure Retaining Boundary Reference Section 3.4 Valves 11 5.70 Pressure Retaining Boundary Reference Section 3.4 Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 10of 11

Category B-Q Steam Generator Tubing IWB-2500-1 Component To Be Examined Comments Item No.

B16.10 Steam Generator Tubing in Straight Tube N/A for McGuire 1& 2 Design B1 6.20 Steam Generator Tubing in U-Tube Design Reference Section 3.1 Category F-A Supports IWF-2500-1 Component To Be Examined Comments Item No.

F1.10 Class 1 Piping Supports F1.40 Supports Other Than Piping Supports (Class 1, 2, and 3)

Inservice Inspection Plan Section 4 McGuire Nuclear Station Revision 0 General Requirements Page 11 of 11

5.0 Description of Inservice Inspection Plan for ASME Class 2 The inservice inspection of ASME Class 2 items shall be performed in accordance with the requirements of Article IWC-2000 of Section Xi. Specific examination listings and schedules are described in Section 8. A detailed listing and schedule of each examination is shown in Section 1 of the Unit 1 and Unit 2 Volumes. Class 2 examinations were scheduled for the third inspection interval in accordance with the following table from Section Xl, Inspection Program B.

Table IWC-2412-1 Inspection Inspection Period, Minimum Examinations Maximum Interval Calendar Years of Completed, % Examinations Plant Service Within Credited, %

the Interval [Note 1]

3rd 3 16 50 07 50 75 I _ __ __ I_ 10 100 100 Note 1: If the first period completion percentage for any examination category exceeds 34%, at least 16% of the required examinations shall be performed in the second period.

5.1 Examination Categories and Requirements The examination categories to be used are those listed in Table IWC-2500-1 of Section Xi.

Specific examinations will be identified by an item number, similar to those listed in Table IWC-2500-1 of Section Xl, plus an additional number to uniquely identify that examination. (Example C01.010.001) Class 2 items to be inspected:

Category C-A Pressure Retaining Welds In Pressure Vessels IWC-2500-1 Component To Be Examined Comments Item No.

C1.10 Shell Circumferential Welds C1.20 Head Circumferential Welds C1.30 Tubesheet-to-Shell Weld Inservice Inspection Plan Section 5 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 5

Category C-B Pressure Retaining Nozzle Welds In Vessels IWC-2500-1 Component To Be Examined Comments Item No.

C2.10 Nozzles in Vessels < 1/2 in. Nominal Thickness C2.11 Nozzle-to-Shell (Nozzle to Head or Nozzle to Nozzle) Weld C2.20 Nozzles Without Reinforcing Plate in Vessels > 1/2 in. Nominal Thickness C2.21 Nozzle-to-Shell (Nozzle to Head or Nozzle to Nozzle) Weld C2.22 Nozzle Inside Radius Section C2.30 Nozzles With Reinforcing Plate in Vessels > 1/2 in. Nominal Thickness C2.31 Reinforcing Plate Welds to Nozzle and Vessel C2.32 Nozzle-to-Shell (Nozzle to Head or Nozzle N/A for McGuire 1& 2 to Nozzle) Welds When Inside of Vessel is Accessible C2.33 Nozzle-to-Shell (Nozzle to Head or Nozzle Reference Section 3.4 to Nozzle) Welds When Inside of Vessel is Inaccessible Category C-C Welded Attachments For Vessels, Piping, Pumps, And Valves IWC-2500-1 Component To Be Examined Comments Item No.

Pressure Vessels C3.10 Welded Attachments Piping C3.20 Welded Attachments Pumps C3.30 Welded Attachments Inservice Inspection Plan Section 5 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 5

Category C-C (cont.)

IWC-2500-1 Component To Be Examined Comments Item No.

Valves C3.40 Welded Attachments N/A for McGuire 1& 2 Category C-D Pressure Retaining Bolting Greater Than 2 in. In Diameter IWC-2500-1 Component To Be Examined Comments Item No.

Pressure Vessels C4.10 Bolts and Studs N/A for McGuire 1& 2 Piping C4.20 Bolts and Studs N/A for McGuire 1& 2 Pumps C4.30 Bolts and Studs N/A for McGuire 1& 2 Valves C4.40 Bolts and Studs N/A for McGuire 1& 2 Category C-F-1 Pressure Retaining Welds In Austenitic Stainless Steel Or High Alloy Piping IWC-2500-1 Component To Be Examined Comments Item No.

C5.10 Piping Welds > 3/8 in. Nominal Wall Thickness for Piping > NPS 4 C5.11 Circumferential Weld Reference RFR 01-005 C5.20 Piping Welds >1/5 in. Nominal Wall Thickness for Piping > NPS 2 and <

NPS 4 C5.21 Circumferential Weld Reference RFR 01-005 Inservice Inspection Plan Section 5 McGuire Nuclear Station Revision 0 General Requirements Page 3 of 5

Category C-F-1 (cont.)

IWC-2500-1 Component To Be Examined Comments Item No.

C5.30 Socket Welds Reference RFR 01-005 Reference RFR 01-008 C5.40 Pipe Branch Connections of Branch Piping > NPS 2 C5.41 Circumferential Weld Reference RFR 01-005 Category C-F-2 Pressure Retaining Welds In Carbon Or Low Alloy Steel Piping IWC-2500-1 Component To Be Examined Comments Item No.

C5.50 Piping Welds > 3/8 in. Nominal Wall Thickness for Piping > NPS 4 C5.51 Circumferential Weld Reference RFR 01 -005 C5.60 Piping Welds >1/5 in. Nominal Wall Thickness for Piping > NPS 2 and <

NPS 4 C5.61 Circumferential Weld Reference RFR 01-005 C5.70 Socket Welds Reference RFR 01-005 Reference RFR 01-008 C5.80 Pipe Branch Connections of Branch Piping > NPS 2 C5.81 Circumferential Weld Reference RFR 01-005 Inservice Inspection Plan Section 5 McGuire Nuclear Station Revision 0 General Requirements Page 4 of 5

Category C-G Pressure Retaining Welds In Pumps And Valves IWC-2500-1 Component To Be Examined Comments Item No.

Pumps C6.10 Pump Casing Welds N/A for McGuire 1& 2 Valves C6.20 Valve Body Welds Category C-H All Pressure Retaining Components IWC-2500-1 Component To Be Examined Comments Item No.

C7.10 Pressure Retaining Components Reference Section 3.4 Category F-A Supports IWF-2500-1 Component To Be Examined Comments Item No.

F1.20 Class 2 Piping Supports F1.40 Supports Other Than Piping Supports (Class 1, 2, and 3)

Inservice Inspection Plan Section 5 McGuire Nuclear Station Revision 0 General Requirements Page 5 of 5

6.0 Description of Inservice Inspection Plan for ASME Class 3 The inservice inspection of ASME Class 3 items shall be performed in accordance with the requirements of Article IWD-2000 of Section Xl. Specific examination listings and schedules are described in Section 8. A detailed listing and schedule of each examination is shown in Section 1 of the Unit 1 and Unit 2 Volumes. Class 3 examinations were scheduled for the third inspection interval in accordance with the following table from Section Xl, Inspection Program B.

Table IWD-2412-1 Inspection Inspection Period, Minimum Examinations Maximum Interval Calendar Years of Completed, % Examinations Plant Service Within Credited, %

the Interval [Note 1]

3rd 3 16 50 7 50 75 10 100 100 Note 1: If the first period completion percentage for any examination category exceeds 34%, at least 16% of the required examinations shall be performed in the second period.

6.1 Examination Categories and Requirements The examination categories to be used are those listed in Table IWD-2500-1 of Section Xl.

Specific examinations will be identified by an item number, similar to those listed in Table IWD-2500-1 of Section Xl, plus an additional number to uniquely identify that examination. (Example D01.010.001) Class 3 items to be inspected:

Category D-A Welded Attachments for Vessels, Piping, Pumps, and Valves IWD-2500-1 Component to be Examined Comments Item No.

Pressure Vessels D1.10 Welded Attachments Piping D1.20 Welded Attachments Pumps D1.30 Welded Attachments N/A for McGuire 1& 2 Inservice Inspection Plan Section 6 McGuire Nuclear Station Revision 0 General Requirements Page 1of 2

Category D-A (cont.)

IWD-2500-1 Component to be Examined Comments Item No.

Valves D1 .40 Welded Attachments N/A for McGuire 1& 2 Category D-B All Pressure Retaining Components IWD-2500-1 Component To Be Examined Comments Item No.

D2. 10 Pressure retaining components Reference Section 3.4 D2.20 Pressure retaining components Reference Section 3.4 Category F-A Supports IWF-2500-1 Component to be Examined Comments Item No.

F1.30 Class 3 Piping Supports F1.40 Supports Other Than Piping Supports (Class 1, 2, and 3)

Inservice Inspection Plan Section 6 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 2

7.0 Description of Augmented and Elective Inservice Inspection Plan Augmented and Elective inservice inspection shall be performed as required in Section 1.1 of this plan. Specific examination listing and schedules are described in Section 8 of this plan. A detailed listing and schedule of each examination is shown in Section 1 of the Unit 1 and Unit 2 Volumes.

Augmented and elective examination information found within this Inservice Inspection Plan is not required by the ASME Section Xl Code; therefore, it is exempt from ANII review, verification, and/or record certification.

7.1 Examination Categories and Requirements Items requiring augmented inservice inspection are described in the following paragraphs.

Each inspection will be assigned a unique Item Number.

7.1.1 Reactor Coolant Pump Flywheels (Item Number Series GO1.001)

The following inspection techniques will be used in accordance with the McGuire Unit 1 and 2 Technical Specification 5.5.7, Amendment Nos. 171 and 190.

A qualified in-place UT examination over the volume from the inner bore of the flywheel to the circle one-half of the outer radius or a surface examination (MT and/or PT) of exposed surfaces of the removed flywheels may be conducted at approximately 10 year intervals coinciding with the inservice inspection schedule as required by Section Xl.

Duke Power Company will schedule all four Reactor Coolant Pumps for a UT examination. Only one exam per pump is required.

7.1.2 Augmented Inservice Inspection on Accumulator Iniection Pining Welds at the Reactor Coolant System Nozzles for Pipe Rupture Protection (Item Number Series G03.001)

Pipe rupture protection shall comply with Augmented Inservice Inspection for Pipe Rupture Protection SRG-78-01, Revision 2 (Distribution Code MADM-257) for McGuire Nuclear Station.

I, Inservice Inspection Plan Section 7 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 1

8.0 Description of Examination Listings All ASME Class 1, 2, and 3 systems and components have been reviewed to determine the inservice examination requirements for McGuire Units 1 and 2. Examination listing and schedules referenced by this section were written in accordance with the criteria found in Sections 3, 4, 5, 6, and 7.

The printouts identifying NDE examinations to be performed during each outage are shown in Section 1 of the Unit 1 and Unit 2 Volumes. These numbers will correlate back to the McGuire Units 1 and 2 end of cycle refueling number as shown below.

McGuire Unit 1 l Outage No. I 1 2 3 4 5 6 l7 l End of Cycle No. l 15 l 16 17 18 19 20 l 21 l McGuire Unit 2 fOutage No. 1 2 3 4 5 1 6 7 1 End of Refueling Cycle No. 16 17 18 19 20 21 22 8.1 Examination Information The following information is listed for each examination where applicable:

8.1.1 Item Number The item number for each examination is composed of three sections. The first two sections of the item number for ASME Class 1, Class 2, and Class 3 items are similar to item numbers assigned in Table IWB-2500-1, IWC-2500-1 and IWD-2500-1 of Section Xl. The last section of the item number is made up with a three or four character sequence to uniquely identify that inspection. (Examples B01.011.001, C01.010.001, D01.010.001)

Item numbers for Class 1, 2, and 3 supports in Table IWF-2500-1 are identified as shown below:

Class 1 F01.01 0.000A = Category A (rods in one direction only)

F01.01 0.000B = Category B (multi-directional hangers)

F01.010.000C = Category C (thermal movement, i.e. springs, snubbers, and constant supports)

Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 1of 7

Class 2 F01.020.000A = Category A (rods in one direction only)

F01.020.000B = Category B (multi-directional hangers)

F01.020.000C = Category C (thermal movement, i.e. springs, snubbers, and constant supports)

Class 3 F01.030.000A = Category A (rods in one direction only)

F01.030.000B = Category B (multi-directional hangers)

F01.030.000C = Category C (thermal movement, i.e. springs, snubbers, and constant supports)

The last section of the item number is made up with a three or four character sequence to uniquely identify that inspection. (Examples F01.01 0.001 A.,

F01.020.001 B, FOl.030.001 C) 8.1.2 ID Number The ID number is selected so that, by using the specified reference drawing(s) and any applicable comments, the area to be examined can be accurately identified.

Several different weld identification systems were used by various equipment vendors. A consistent system of weld or component identification has been developed and is described below:

8.1.2.1 The first character of each ID number indicates the unit to which the examination applies.

8.1.2.2 The unit number is followed by a series of letters and/or numbers to indicate the component or system to be examined.

Abbreviations used are shown below:

CRDM Control Rod Drive Mechanism CAPTD Auxiliary Feedwater Pump Turbine Driven CBD Cation Bed Demineralizer CCP Centrifugal Charging Pump CSHX Containment Spray Heat Exchanger Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 2 of 7

DG Diesel Generator ELDHX Excess Letdown Heat Exchanger KCHX Component Cooling Heat Exchanger KCP Component Cooling Pump KCST Component Cooling Surge Tank KDC Lube Oil Cooler KDHX Diesel Generator Cooling Water Heat Exchanger KDP Jacket Water Pump KFHX Fuel Pool Cooling Heat Exchanger LDHX Letdown Heat Exchanger LDF Lube Oil Filter MBD Mixed Bed Demineralizer NDP Residual Heat Removal Pump NDHX Residual Heat Removal Heat Exchanger NIP Safety Injection Pump NSP Containment Spray Pump NSHX Containment Spray Heat Exchanger PZR Pressurizer RCHP Reciprocating Charging Pump RCHPA Reciprocating Charging Pump Accumulator RCHPSS Reciprocating Charging Pump Suction Stabilizer RCP Reactor Coolant Pump REGHX Regenerative Heat Exchanger RHRHX Residual Heat Removal Heat Exchanger RNP Nuclear Service Water Pump Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 3 of 7

RNST Nuclear Service Water Strainer RPV Reactor Pressure Vessel SGA Steam Generator A SGB Steam Generator B SGC Steam Generator C SGD Steam Generator D SWIF Seal Water Injection Filter SWINJF Seal Water Injection Filter VGTK Diesel Generator Starting Air Tank WNP Diesel Generator Sump Pump CA Auxiliary Feedwater System CF Main Feedwater System FW Refueling Water System KC Component Cooling System KD Diesel Generator Engine Cooling Water System LD Diesel Generator Lube Oil System NC Reactor Coolant System ND Residual Heat Removal System NI Safety Injection System NS Containment Spray System NV Chemical and Volume Control System RN Nuclear Service Water System RV Containment Ventilation Cooling Water System SA Auxiliary Steam System SM Main Steam System Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 4 of 7

SV Main Steam Vent to Atmosphere System VQ Containment Air Release and Addition System WL Liquid Waste Recycle System WN Diesel Generator Room Sump Pump System 8.1.2.3 The remainder of the ID number will indicate the exact weld or component to be examined, as shown on the reference drawings.

Additional information may be included in the comments to help identify the area to be examined.

8.1.3 Drawing Numbers Drawings beginning with "MC-ISIN-" are electronic color-coded NDE boundary drawings that were used as the basis for all exams listed in Section 1 of the Unit 1 Volume scheduled for examination during the first inspection period (outages 1 and 2).

Drawings beginning with "MC-ISIN3-" are electronic color-coded NDE boundary drawings that were used as the basis for all exams listed in Section 1of the Unit 1 Volume for the second and third inspection periods and the Unit 2 Volume for all three inspection periods. These drawings are maintained by the ISI Plan Management Group/ Nuclear GO Services Division and a controlled copy of these drawings can be obtained from Document Management located in the Duke Power Company General Office.

At least one drawing number is listed for each examination, if available. Drawing numbers beginning with "MCM" are vendor component drawings. Drawing numbers beginning with "MCFI-", followed by the unit number and a two-letter system designation (see paragraph 8.1.2.2) are weld isometrics. Drawings beginning with "MCSRD" are piping support math model drawings. These drawings can be obtained from Document Management located at McGuire Nuclear Station.

8.1 .4 Location (Optional)

Location of Item: building, degree, elevation, axis, etc.

8.1.5 Inspection Required / Configuration (Pipe to Elbow, Pipe to Valve, Tee to Reducer, etc.)

The following abbreviations are used to describe the type of inspection required for each item:

PT Liquid Penetrant Inspection MT Magnetic Particle Inspection Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 5 of 7

RT Radiographic Inspection UT Ultrasonic Inspection ET Eddy Current Inspection VT-1 ISI Visual Inspection VT-3 ISI Visual Inspection (General Condition of Components and Supports) 8.1.6 Procedure The procedures to be used for the examinations were selected by the NDE Level li, from Section 3 of this plan. The designation "TBD" is used to indicate cases where the procedure is in the process of being written.

8.1.7 Material Type/Grade The following abbreviations are used to indicate the type of material to be examined:

CS Carbon Steel SS Stainless Steel IN Inconel 8.1.8 Diameter The actual outside diameter of the weld is listed for pressure vessels less than 100 inches in diameter. No entry is made if the weld diameter is 100 inches or larger.

The nominal pipe size (NPS) is listed for all valves and piping up to 24 inches NPS.

The nominal inside diameter is listed for all vendor supplied piping larger than 24 inches NPS.

The nominal outside diameter is listed for bolts and studs when applicable.

8.1.9 Thickness The dimension listed for component or piping welds is the nominal thickness at the weld.

The overall length of bolts or studs is listed when applicable due to limited database fields.

The dimension listed for support attachment welds is the thickness of the attachment base material.

Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 6 of 7

RT Radiographic Inspection UT Ultrasonic Inspection ET Eddy Current Inspection VT-1 ISI Visual Inspection VT-3 ISI Visual Inspection (General Condition of Components and Supports) 8.1.6 Procedure The procedures to be used for the examinations were selected by the NDE Level ll, from Section 3 of this plan. The designation "TBD" is used to indicate cases where the procedure is in the process of being written.

8.1.7 Material Type/Grade The following abbreviations are used to indicate the type of material to be examined:

CS Carbon Steel SS Stainless Steel IN Inconel 8.1.8 Diameter The actual outside diameter of the weld is listed for pressure vessels less than 100 inches in diameter. No entry is made if the weld diameter is 100 inches or larger.

The nominal pipe size (NPS) is listed for all valves and piping up to 24 inches NPS.

The nominal inside diameter is listed for all vendor supplied piping larger than 24 inches NPS.

The nominal outside diameter is listed for bolts and studs when applicable.

8.1.9 Thickness The dimension listed for component or piping welds is the nominal thickness at the weld.

The overall length of bolts or studs is listed when applicable.

The dimension listed for support attachment welds is the thickness of the attachment base material.

Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 6 of 7

8.1.10 Calibration Block The calibration block(s) to be used for the UT examinations were selected by the NDE Level IlIl, from the calibration block listing shown in Section 10 of this plan. The designation "TBD" is used to indicate cases where the calibration block is still being designed and/or fabricated.

An asterisk (*) is used to identify ultrasonic examinations which do not require a basic calibration block number to be listed. Duke Power Company ultrasonic procedures NDE-600 and NDE-670 are written and qualified to Appendix VII of the 1995 Edition of ASME Section Xl, thru the 1996 Addenda and the 1998 Edition of ASME Section Xl, thru the 2000 Addenda.

8.1.11 Comments Additional information pertaining to the specified examination will be included here when needed.

8.2 Examination Listings The examination listing and schedule are found in Section 1 of the Unit 1 and Unit 2 Volumes.

Inservice Inspection Plan Section 8 McGuire Nuclear Station Revision 0 General Requirements Page 7 of 7

9.0 Requests for Relief From ASME Code Requirements Each request for relief/request for alternative from a requirement of the ASME Code specified in Section 1 will be submitted by the Nuclear Generation Department to the Nuclear Regulatory Commission for approval.

The following requests for relief/request for alternative have been submitted for approval:

Serial Description Units Date Date Comments Number Affected Submitted Approved 01-004 Request for Alternative 1 06/02/2001 1/30/2002 Reference to IWF-5000 OM -1987, RFR 03-001 Part 4, snubber examinations. (Item F01.050) 01 -005 WCAP-14572, Revision 1& 2 06/26/2001 06/12/2002 Reference 1-NP-A. "Westinghouse RFR 03-001 Owners Group Application of Risk-Informed Methods to Piping Inservice Inspection Topical Report."01-008 Perform Visual VT-2 1& 2 06/26/2001 06/12/2002 Reference examinations in lieu of RFR 03-001 volumetric examinations on Class 1 and 2 Socket Welds identified in the Risk-Informed Program 03-001 Request to Use 1 Pending previously approved RFR's that were approved under 95/96 Addenda.03-002 Request for Alternative 2 Pending to IWF-5000 OM -1987, Part 4, snubber examinations. (Item F01.050)

Inservice Inspection Plan Section 9 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 2

Serial Description Units Date Date Comments Number Affected Submitted Approved 03-005 Request for Alternative 1& 2 Pending on Pressurizer Support Skirt Weld Inservice Inspection Plan Section 9 McGuire Nuclear Station Revision 0 General Requirements Page 2of2

10.0 Calibration Standards 10.1 Ultrasonic Calibration Standards 10.1.1 Calibration standards are prepared for each UT inspection listed in Section 1 of the Unit 1 and Unit 2 Volumes. All calibration standards are designed in accordance with the requirements of Section Xl.

10.1.2 Calibration standards for UT inspection shall be selected per the calibration block listing. The number of the calibration standard used shall be recorded on the inspection data.

10.1.3 Procedure NDE-600 is written to meet the requirements of Appendix Vil and does not require the use of a calibration block. In cases where NDE-600 is specified for use, the IS database calibration block field will contain an asterisk (*) and the comments will contain the following note: "

• See Section 8 for calibration block requirements." NDE-600 is for the examination of similar metal piping welds e.g., stainless to stainless and carbon to carbon.

10.2 Eddy Current Calibration Standards Eddy current calibration standards are maintained by the Steam Generator Maintenance and Engineering Support Section/Nuclear GO Services Division. Eddy current examinations are scheduled and performed per McGuire Technical Specifications.

10.3 Calibration Standard Description The McGuire Calibration Block Listing found in this section contains information concerning each calibration standard shown in Section 1 of the Unit 1 and Unit 2 Volumes.

Inservice Inspection Plan Section 10 McGuire Nuclear Station Revision 0 General Requirements Page 1 of 1

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Pagel of 4 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN1 11/04/2003 Calibration Block Listing MATERIAL DIAM THICKNESS BLOCK NO. TYPE DESCRIPTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS 40387 PLATE 6" x 7" x 28" SA508 CL.2 98/OOA CS 0.000 7.000 Heat # 158025C-1 SS Clad 40397 PLATE 3" x 6" x 12" SA 240 TYPE 98/OOA CS 0.000 3.000 Heat # 28316 316 50202 PIPE 1.5 Inch Sch.160 SA 376 98/OOA SS 1.900 0.281 Heat # 08574 T304 50211 PIPE 6" Sch. 160 SA376 T304 98/OOA SS 6.650 0.719 Heat # C7948 50213 PIPE 14" SCH 140 SA376 T316 98/OOA SS 14.000 1.250 HEAT# 54865 50217 PIPE 2" SCH 160 SA376 T304 98/OOA SS 2.380 0.344 HEAT# 00672 50225 PIPE 3" SCH 160 SA376 T304 98/OOA SS 3.500 0.438 HEAT# M7282 50236A PLATE 15" x 4" x 6" SA508 98/OOA CS 0.000 6.125 Heat # 123L418 50237 FORGING 25" x 20" x 9" SA508 98/OOA CS 0.000 9.000 Heat # CZS123L418 Forging 50237B FORGING 5" x 6" x 12" SA508 CL.2 98/OOA CS 0.000 5.000 Heat # CZS123L418 50275 PIPE 4" SCH 160 SA376 T304 98/OOA SS 4.500 0.531 HEAT# M5092 50304 PLATE 9" x 36.65" x 37" SA 508 98/OOA CS 0.000 9.000 Heat # CCR801 SS Clad CL.2 Heat #L3541 50313 PIPE 12" SCH 40 SA312 T304 98/OOA SS 12.750 0.375 Heat # F60096 Reciprocating Charging Pump Suction

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Page 2 of 4 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN1 11/04/2003 Calibration Block Listing MATERIAL DIAM THICKNESS BLOCK NO. TYPE DESCRI PTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS 50319 PIPE 6" Sch. 80 SA312 SS304 98/OOA Ss 6.625 0.432 Heat # F81032 50327 PIPE 8 Inch Sch. 40 SA 106 GR 98/OOA CS 8.630 0.322 Heat # L64027 B

50337 PLATE 4.2" x 6" x 15" SA533 GR.A 98/OOA CS 0.000 4.200 Heat # B7401-1 SS Clad CL.

50338 PLATE 3" x 6" x 15" SA533 GR.A 98/OOA CS 0.000 3.000 Heat # B7401-1 CS With SS Clad CL.

50339 PIPE 14" x 1.64" SA182 F316L 98/OOA Ss 14.000 1.640 Heat # D-42 50374 PIPE 6.25" x .625" Inconel SB-167 98/OOA Inconel 6.250 0.625 Heat # 2155-2-3495 50376 PLATE 6" x 7" x 28" SA533 GR.B 98/OOA CS 0.000 7.000 Heat # C0569-2 Code # B8604-3 CL. SS Clad (Curved) 50422 PLATE 6" x 12" x.625" SA516-70 98/OOA CS 0.000 0.625 Heat # 401H0641 1/16" 304 Cladding Containment Spray Heat Exhanger 50424 PIPE 4" Sch. 120 SA312 T304 98/OOA SS 4.500 0.438 Heat # L37754 Seal Water Injection Filter 1A 50428 CURVED CCS 10.92" x 1.075" SA351 CF8 98/OOA SS 10.920 1.075 Heat # A8969 Thickness = 01.070 Thru 01.075 Regenerative Heat Exchanger 50436 PIPE 4" SCH 80 SA376 98/OOA Ss 4.500 0.337 T304/31 6 50438 PIPE 4" SCH 40 SA376/312 T304 98/OOA SS 4.500 0.237 50465 RCP STUD 42.0" x 4.320" SA540 98/OOA CS 4.320 0.000 Heat # B9476 Pro. No. 36506-OR GR.B-2 Serial # 12189 "D" RCP Studs

(

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Page 3 of 4 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN1 Calibration Block Listing 11/04/2003 MATERIAL DIAM THICKNESS BLOCK NO. TYPE DESCRIPTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS 50467 NOZZLE FORGING 6" x .875" SA508 CL.2 98/OOA CS 6.000 0.875 Heat # R-4980 .120" SS Cladding 50468 NOZZLE FORGING 15" x 1.250" SA508 CL.2 98/OOA CS 15.000 1.250 Heat # X703435 .190" SS Cladding 50471 PIPE 8 inch Sch. 160 SA312 Type 98/OOA SS 8.625 0.906 Heat # D890902 316 50501 REACTOR VESSEL 64.594" x 6.697" SA540 98/OOA CS 6.690 0.000 Heat # 61880 STUD GR.B-2 50502 STUD 30.6" X 4.375" SA 540 GR. 98/OOA CS 4.375 30.600 Heat # 99137 RCP Stud (Hex-Head)

B24 5131617 FORGING SA508 Class 3 98/OOA CS 0.000 6.400 Steam Generator Primary Head to Tubesheet Carbon Steel with Stainless Steel Clad 5135230 FORGING SA508 Class 3 98/OOA CS 0.000 3.250 Steam Generator Secondary Shell to Tubesheet 5139385 FORGING SA508 Class 3 98/OOA CS 0.000 4.125 Steam Generator Secondary Side 5149697 PLATE SA336 Class F 316N 98/OOA SS 0.000 3.750 Heat # IN 151 Lot # 27777ACSS Steam Generator Primary Inlet and Outlet Nozzle to SE 5158172 PLATE SA336 Class F 316N 98/OOA SS 0.000 4.400 Steam Generator Primary Inlet and Outlet Nozzle to SE 7C01 5 SG STUD 2.500" x 26.625" SA540 98/OOA CS 2.500 26.625 Steam Generator Manway Stud GR.B 8304-601 FORGING SA508 Class 1 98/OOA CS 20.000 4.300 Heat # 24-2094 Main Feedwater Nozzle Inside Radius 95001 FORGING 11.88"x 6"x 36.06" SA 508 98/AO CS 6.000 11.880 Heat # 123-Y-317 SS Clad CL.2 Framatome Block FTI-RPV-95001

( (

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Page 4 of 4 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN1 Calibration Block Listing 11/04/2003 MATERIAL DIAM THICKNESS BLOCK NO. TYPE DESCRIPTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS CB0803 PIPE 9.50 X .750 SA106 GR.C 98/OOA CS 9.500 0.750 Excess Letdown Heat Exchanger (SMLS) 3/16" 304 SS Cladding

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Page 1 of 3 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN2 Calibration Block Listing 11/04/2003 MATERIAL DIAM THICKNESS BLOCK NO. TYPE DESCRIPTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS 40387 PLATE 6" x 7" x 28" SA508 CL.2 98/OOA CS 0.000 7.000 Heat # 158025C-1 SS Clad 50202 PIPE 1.5 Inch Sch.160 SA 376 98/OOA Ss 1.900 0.281 Heat # 08574 T304 50211 PIPE 6" Sch. 160 SA376 T304 98/OOA SS 6.650 0.719 Heat # C7948 50213 PIPE 14" SCH 140 SA376 T316 98/OOA SS 14.000 1.250 HEAT# 54865 50217 PIPE 2" SCH 160 SA376 T304 98/OOA SS 2.380 0.344 HEAT# 00672 50225 PIPE 3" SCH 160 SA376 T304 98/OOA Ss 3.500 0.438 HEAT# M7282 50236A PLATE 15" x 4" x 6" SA508 98/OOA CS 0.000 6.125 Heat # 123L418 50237 FORGING 25" x 20" x 9" SA508 98/OOA CS 0.000 9.000 Heat # CZS123L418 Forging 50237B FORGING 5" x 6" x 12" SA508 CL.2 98/OOA CS 0.000 5.000 Heat # CZS123L418 50275 PIPE 4" SCH 160 SA376 T304 98/OOA SS 4.500 0.531 HEAT# M5092 50304 PLATE 9" x 36.65" x 37" SA 508 98/OOA CS 0.000 9.000 Heat # CCR801 SS Clad CL.2 Heat #L3541 50313 PIPE 12" SCH 40 SA312 T304 98/OOA SS 12.750 0.375 Heat # F60096 Reciprocating Charging Pump Suction 50319 PIPE 6" Sch. 80 SA312 SS304 98/OOA SS 6.625 0.432 Heat # F81032

( ( (

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Page 2 of 3 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN2 11/04/2003 Calibration Block Listing MATERIAL DIAM THICKNESS BLOCK NO. TYPE DESCRIPTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS 50327 PIPE 8 Inch Sch. 40 SA 106 GR 98/OOA CS 8.630 0.322 Heat # L64027 B

50337 PLATE 4.2" x 6" x 15" SA533 GR.A 98/OOA CS 0.000 4.200 Heat # B7401-1 SS Clad CL, 50338 PLATE 3" x 6" x 15" SA533 GR.A 98/OOA CS 0.000 3.000 Heat # B7401-1 CS With SS Clad CL.

50339 PIPE 14"x 1.64" SA182 F316L 98/OOA SS 14.000 1.640 Heat # D-42 50376 PLATE 6" x 7" x 28" SA533 GR.B 98/OOA CS 0.000 7.000 Heat # C0569-2 Code # B8604-3 CL. SS Clad (Curved) 50422 PLATE 6" x 12" x .625" SA516-70 98/OOA CS 0.000 0.625 Heat # 401H0641 1/16" 304 Cladding Containment Spray Heat Exhanger 50424 PIPE 4" Sch. 120 SA312 T304 98/OOA SS 4.500 0.438 Heat # L37754 Seal Water Injection Filter 1A 50428 CURVED CCS 10.92" x 1.075" SA351 CF8 98/OOA SS 10.920 1.075 Heat # A8969 Thickness = 01.070 Thru 01.075 Regenerative Heat Exchanger 50436 PIPE 4" SCH 80 SA376 98/OOA SS 4.500 0.337 T304/31 6 50438 PIPE 4" SCH 40 SA376/312 T304 98/OOA SS 4.500 0.237 50467 NOZZLE FORGING 6" x .875" SA508 CL.2 98/OOA CS 6.000 0.875 Heat # R-4980 .120" SS Cladding 50471 PIPE 8 inch Sch. 160 SA312 Type 98/OOA SS 8.625 0.906 Heat # D890902 316 50501 REACTOR VESSEL 64.594" x 6.697" SA540 98/OOA CS 6.690 0.000 Heat # 61880 STUD GR.B-2

( (

Code Year 1998 DUKE ENERGY CORPORATION Run E QUALITY ASSURANCE TECHNICAL SERVICES Page 3 of 3 Report order: Block no. Inservice Inspection Database Management System Plant(s): MN2 11/04/2003 Calibration Block Listing MATERIAL DIAM THICKNESS RI LC.K NO. TYPF DESCRIPTION CODE REQ TYPE/GRADE SIZE (LENGTH) COMMENTS 50502 STUD 30.6" X 4.375" SA 540 GR. 98/OOA CS 4.375 30.600 Heat # 99137 RCP Stud (Hex-Head)

B24 5131617 FORGING SA508 Class 3 98/OOA CS 0.000 6.400 Steam Generator Primary Head to Tubesheet Carbon Steel with Stainless Steel Clad 5135230 FORGING SA508 Class 3 98/OOA CS 0.000 3.250 Steam Generator Secondary Shell to Tubesheet 5139385 FORGING SA508 Class 3 98/OOA CS 0.000 4.125 Steam Generator Secondary Side 5149697 PLATE SA336 Class F 316N 98/OOA SS 0.000 3.750 Heat # IN 151 Lot # 27777ACSS Steam Generator Primary Inlet and Outlet Nozzle to SE 5158172 PLATE SA336 Class F 31 6N 98/OOA SS 0.000 4.400 Steam Generator Primary Inlet and Outlet Nozzle to SE 7C01 5 SG STUD 2.500" x 26.625" SA540 98/OOA CS 2.500 26.625 Steam Generator Manway Stud GR.B 8304-60 1 FORGING SA508 Class 1 98/OOA CS 20.000 4.300 Heat # 24-2094 Main Feedwater Nozzle Inside Radius CB0803 PIPE 9.50 X .750 SA1 06 GR.C 98/OOA CS 9.500 0.750 Excess Letdown Heat Exchanger (SMLS) 3/16" 304 SS Cladding

THIRD INTERVAL INSERVICE INSPECTION PLAN McGUIRE NUCLEAR STATION UNIT 1 REVISION 0 iDuke Powersm A Duke Energy Company Inservice Inspection Plan G. J. Underwood Phone: (704)382-6100 Email:gjunderwood @duke-energy.com McGuire Nuclear Station G. D. Scarboro Phone: (704)382-0121 Email:gdscarbo @duke-energy.com Unit 1

McGuire Unit 1 Inservice Inspection Examination Listing and Schedule Section 1 Revision 0 The detailed inspection plans for Inservice Inspection of McGuire Unit 1 are maintained in this volume. Section 1 contains the examination listing and Section 2 contains a listing of ISI NIDE boundary drawings.

Inservice Inspection Plan Section 1 McGuire Nuclear Station Revision 0 Unit 1 Page 1 of 1

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 1 Refueling Outage EOC 15 ISI Inspection Listing Revision 0

EOC 15 DUKE ENERGY CORPORATION

(

CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Ves,sei Inservice Inspection Database Management System Plan Report hell-to-FE inge Weld McGuire 1 Page 1 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS B01.030.001 1FIPV 7-442 MCM 1201.01-146 NDE-350 UT CS 0.000 50304 NOZZLE BELT PC. 454-01 TO FLANGE PC.

Circumferential MCM 1201.01-223 10.700 442-06.

Class A Nozzle Belt to UT FROM FLANGE SURFACE.

Flange Total B01.030 Items: 1

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report Tead-F -Ato.FlanWc l Weld Ie McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B01.040.001 1RPV6-446A MCM 1201.01-204 NDE-360 UT CS 0.000 50376 CLOSURE HEAD PC. 446-02 TO FLANGE Circumferential MCM 1201.01-225 7.300 PC. 446-03.

Class A Head to Flange B01.040.001A 1RPV 6-446A MCM 1201.01-204 NDE-25 MT CS 0.000 CLOSURE HEAD PC. 446-02 TO FLANGE PC.

Circumferential MCM 1201.01-225 7.300 446-03.

Class A Head to Flange Total B01.040 Items: 2 Total B01 Items: 3

EOC 15 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE:RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Head Nuts

• B06.010.001 1RPV-449-02-01 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.002 1RPV-449-02-02 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.003 1RPV-449-02-03 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.004 1RPV-449-02-04 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.005 1RPV-449-02-05 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.006 1RPV-449-02-06 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.007 1RPV-449-02-07 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.008 1RPV-449-02-08 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 Total B06.010 Items: 8

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Weactor Vessel McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Studs, when removed ****

B06.030.001 1RPV-449-01-01 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.001 A1 RPV-449-01 -01 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.002 1RPV-449-01-02 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.002A 1RPV-449-01-02 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.003 1RPV-449-01-03 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.003A 1RPV-449-01-03 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.004 1RPV-449-01-04 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.004A1RPV-449-01-04 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A

EOC 15 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.005 RPV-449-01-05 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.005A 1RPV-449-01-05 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.006 1RPV-449-01-06 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.006A 1RPV-449-01-06 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.007 1RPV-449-01-07 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.007A 1RPV-449-01-07 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.008 1RPV-449-01-08 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.008A 1RPV-449-01-08 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030,009 RPV-449-01-09 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A

EOC 15 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.009A 1RPV-449-01-09 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.010 1RPV-449-01-10 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.01OA1RPV-449-01-10 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.011 1RPV-449-01-11 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.011A1RPV-449-01-11 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A Total B06.030 Items: 22

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Threads in Flange ****

B06.040.001 1RPV-THREAD-01 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.002 1RPV-THREAD-02 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.003 1RPV-THREAD-03 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.004 1RPV-THREAD-04 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.005 1RPV-THREAD-05 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.006 1RPV-THREAD-06 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.007 1RPV-THREAD-07 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.008 1RPV-THREAD-08 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report IReactor Vessel McGuire 1 Page 8 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.040.009 1RPV-THREAD-09 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.010 1RPV-THREAD-10 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.011 1RPV-THREAD-11 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.012 1RPV-THREAD-12 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.013 1RPV-THREAD-13 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.014 1RPV-THREAD-14 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.015 1RPV-THREAD-15 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.016 1RPV-THREAD-16 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.017 1RPV-THREAD-17 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 1 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.040.018 1RPV-THREAD-18 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.019 1RPV-THREAD-19 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.020 1RPV-THREAD-20 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.021 1RPV-THREAD-21 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.022 1RPV-THREAD-22 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.023 1RPV-THREAD-23 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.024 1RPV-THREAD-24 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.025 1RPV-THREAD-25 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.026 1RPV-THREAD-26 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report

• Reactor Vessel McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.040.027 1RPV-THREAD-27 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.028 1RPV-THREAD-28 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.029 1RPV-THREAD-29 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.030 1RPV-THREAD-30 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.031 1RPV-THREAD-31 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.032 1RPV-THREAD-32 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.033 1RPV-THREAD-33 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.034 1RPV-THREAD-34 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.035 1RPV-THREAD-35 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A

EOC 15 (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor essel McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 1 1203/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.040.036 1RPV-THREAD-36 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.037 1RPV-THREAD-37 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.038 1RPV-THREAD-38 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.039 1RPV-THREAD-39 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.040 1RPV-THREAD-40 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.041 1RPV-THREAD-41 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.042 1RPV-THREAD-42 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.043 1RPV-THREAD-43 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.044 1RPV-THREAD-44 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A

EOC 15 /

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.040.045 1RPV-THREAD-45 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.046 1RPV-THREAD-46 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.047 1RPV-THREAD-47 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.048 1RPV-THREAD-48 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.049 1RPV-THREAD-49 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.050 1RPV-THREAD-50 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.051 1RPV-THREAD-51 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.052 1RPV-THREAD-52 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A B06.040.053 1RPV-THREAD-53 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A

EOC 15 DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Re,taining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Dilameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.040.054 1RPV-THREAD-54 MCM 1201.01-147 NDE-340 UT CS 7.000 40387 THREADS IN REACTOR VESSEL FLANGE.

NC MCM 1201.01-206 12.000 Class A Total B06.040 Items: 54

EOC 15 DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Washers, Bushings B06.050.001 1RPV-449-03-01 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.002 1RPV-449-03-02 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.003 1RPV-449-03-03 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.004 1RPV-449-03-04 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.005 1RPV-449-03-05 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.006 1RPV-449-03-06 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.007 1RPV-449-03-07 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.008 1RPV-449-03-08 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A Total B06.050 Items: 8

EOC 15 /

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts and Studs ****

B06.180.001 RCP-1A-F MCM 1201.01-120 PDI-UT-5 UT CS 4.500 50502 REACTOR COOLANT PUMP 1A MAIN FLANGE NC MCM 1201.01-193 30.500 BOLTING. 24 BOLTS.

Class A Total B06.180 Items: 1 Total B06 Items: 93

EOC 15 )

DUKE ENERGY CORPORATION CATEGORY B-O. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Control Rod Housings Inservice Inspection Database Management System Plan Report WReactor Vessel McGuire 1 Page 16 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG INUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welds in CRD Housing ****

B14.010.011 1RPV-CRDM-65 MCM 1201.01-224 NDE-35 PT SS-Inconel 4.000 CRD HOUSING WELD. (PERIPHERAL)

NC MC-ISIN3-1553-01.00 0.642 Class A Total B14.010 Items: 1 Total B14 Items: 1

EOC 15 DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaininq Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

• Head Circumferential Welds McGuire 1 Page 17 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 E

ITEM NUMBER ID NUMBER SYS ISO/DWG NUI\VIBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.020.001 1SGD-W144 MCM 1201.01-0782 NDE-620 UT CS 0.000 5139385 STEAM GENERATOR D. DEPENDING UPON Circumferential SM MC-ISIN3-1591-01.01 See Corn 4.125 50236A THE EXAMINER'S QUALIFICATIONS, Class B Steam Drum to PROCEDURE PDI-UT-6 MAY BE USED IN LIEU OF Steam Drum Head PROCEDURE NDE-620.

Total C01.020 Items: 1

EOC 15 DUKE ENERGY CORPORATION CATEGORY C-A. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report Tubesheet-to-Shell Weld McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NU MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.030.001 1SGA-W65 MCM 1201.01-0782 NDE-620 UT CS 0.000 5135230 STEAM GENERATOR 1A. DEPENDING UPON Circumferential SM MC-ISIN3-1591-01.01 See Corn 3.687 50236A THE EXAMINERS QUALIFICATIONS, Class B Tubesheet to PROCEDURE PDI-UT-6 MAY BE USED IN LIEU OF Shell PROCEDURE NDE-620.

Total C01.030 Items: 1 Total C01 Items: 2

EOC 15 )

DUKE ENERGY CORPORATION CATEGORY C-B, Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels Inservice Inspection Database Management System Plan Report MNozzles Without Reinforcing Plate in Vessels > McGuire 1 Page 19

-1/2 in. Nom. Thickness Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NJUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Nozzle-to-Shell (Nozzle to Head or Nozzle to Nozzle) Weld ****

C02.021.001 1SGA-W258 MCM 1201.01-0782 NDE-3620 UT CS 16.000 5139385 STEAM GENERATOR 1A FEEDWATER NOZZLE.

Circumferential SM MC-ISIN3-1591-01.01 4.125 50236A Class B Nozzle to Steam Drum C02.021.001A1SGA-W258 MCM 1201.01-0782 NDE-25 MT CS 16.000 STEAM GENERATOR 1A FEEDWATER NOZZLE.

Circumferential SM MC-ISIN3-1591-01.01 4.125 Class B Nozzle to Steam Drum Total C02.021 Items: 2

• • • • Nozzle Inside Radius Section C02.022.001 1SGA-W258 MCM 1201.01-0782 NDE-2080 UT CS 16.000 8304-601 STEAM GENERATOR 1A FEEDWATER NOZZLE Circumferential SM MC-ISIN3-1591-01.01 4.125 INSIDE RADIUS.

Class B Nozzle to Steam Drum Total C02.022 Items: 1 Total C02 Items: 3

EOC 15 )

DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report EPressure Vessels McGuire 1 Page 20 E Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.010.002 1NSHX-SUPPORT-1A MCM 1201.06-25 NDE-35 PT CS 0.000 CONTAINMENT SPRAY HEAT EXCHANGER 1A NS MC-ISIN3-1563-01.00 0.750 SUPPORT.

Class B WELDED ATTACHMENT.

Total C03.010 Items: 1

EOC 15 )

DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW( 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.020.021 1-MCA-ND-H15 MCSRD-NDA/sht. 5 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support ND MC-ISIN-1561-01.00 0.237 F01.020.180A.

Class B 1-MCA-ND-H15 C03.020.031 1-MCA-NI-H6 MCSRD-NIA/sht. 1 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Spring Hgr NI MC-ISIN-1562-03.00 0.203 F01.020.203C.

Class B 1-MCA-N I-H6 Total C03.020 Items: 2

EOC 15 /

DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC; NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.030.001 1CCPUMP-1A-LEG MCM 1201.05-228 NDE-35 PT SS 0.000 CENTRIFUGAL CHARGING PUMP 1A NV MC-ISIN-1554-03.01 0.250 (4 SUPPORT LEGS)

Class B WELDED ATTACHMENT.

EQUIPMENT TAG # 1NVPU001 5, CHEMICAL AND VOLUME CONTROL PUMP (1A).

VERIFY 4" LINE OUTLET FROM PUMP TO VALVE 1NV-802 AND 6" LINE INLET FROM PUMP TO VALVE 1NV-224 TO VERIFY CORRECT PUMP BEFORE INSPECTION.

Total C03.030 Items: 1 Total C03 Items: 4

EOC 15 )

DUKE ENERGY CORPORATION CATEGORY C-G, Pressure Retaininq Welds INSERVICE INSPECTION PLAN MANAGEMENT In Pumps And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 1 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG I\UMBERS PROC INSP REQ MAT/SCH DA/THK CAL BLOCKS COMMENTS

• • • • Valve Body Welds ****

C06.020.001A1CF0026AB-1 MCM 1205.23-0004 NDE-25 MT CS 12.000 ITEM # FWI-002. INSPECT ONE VALVE INTHIS CF MC-ISIN-1591-01.01 1.360 GROUP (1A-1D) PER INTERVAL.

Class B Valve Body to Valve Body Total C06.020 Items: 1 Total C06 Items: 1

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 1 Piping Supports McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.010.001C 1-MCR-NC-500 MCSRD-NC-01/sht. 1 QAL-14 VT-3 NA 14.000 Spring Hgr NC 0.000 Class A F01.010.002A 1-MCR-NC-501 MCSRD-NC-01/sht. 1 QAL-14 VT-3 NA 14.000 Rigid Support NC 0.000 Class A F01.010.003C 1-MCR-NC-506 MCSRD-NC-03/sht. 2 QAL-14 VT-3 NA 6.000 Spring Hgr NC 0.000 Class A F01.010.004A 1-MCR-NC-507 MCSRD-NC-03/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Support NC 0.000 Class A F01.010.051A 1-MCR-ND-500 MCSRD-ND-01/sht. 1 QAL-14 VT-3 NA 14.000 Rigid Support ND 0.000 Class A F01.010.101C 1-MCR-NI-515 MCSRD-NI-01/sht. 1 QAL-14 VT-3 NA 6.000 Hyd Snubber NI 0.000 Class A F01.010.102A 1-MCR-NI-521 MCSRD-NI-01/sht. 4 QAL-14 VT-3 NA 10.000 Rigid Support NI 0.000 Class A F01.010.104C 1-MCR-NI-528 MCSRD-NI-01/sht. 3 QAL-14 VT-3 NA 6.000 Hyd Snubber NI 0.000 Class A

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report rIass Pipina Suports McGuire 1 Page 25 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.010.162C 1-MCR-NV-1234 MCSRD-NV-02/sht. 3 QAL-14 VT-3 NA 3.000 Mech Snubber NV 0.000 Class A F01.010.163C 1-MCR-NV-1 291 MCSRD-NV-09/sht. 1 QAL-14 VT-3 NA 2.000 Mech Snubber NV 0.000 Class A F01.010.164C 1-MCR-NV-1292 MCSRD-NV-09/sht. 1 QAL-14 VT-3 NA 2.000 Spring Hgr NV 0.000 Class A Total F01.010 Items: 11

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report IEass 2 Pipin SDuorts McGuire 1 Page 26 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.020.006A 1-MCR-CA-H400 MCSRD-CAN/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support CA 0.000 Class B F01.020.008C 1-MCA-CA-H415 MCSRD-CAN/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber CA 0.000 Class B F01.020.01OA 1-MCA-CA-H426 MCSRD-CAO/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Support CA 0.000 Class B F01.020.054C 1-MCA-CF-H208 MCSRD-CFC/sht. 12 QAL-14 VT-3 NA 26.000 Hyd Snubber CF MC-ISIN-1591-01.01 0.000 Class B F01.020.058C 1-MCR-CF-H404 MCSRD-CFC/sht. 12 QAL-14 VT-3 NA 16.000 Hyd Snubber CF MC-ISIN-1591-01.01 0.000 Class B F01.020.153B 1-MCA-ND-H17 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint ND 0.000 Class B F01.020.155C 1-MCA-ND-H23 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Spring Hgr ND 0.000 Class B F01.020.157B 1-MCA-ND-H59 MCSRD-NDA/sht. 6 QAL-14 VT-3 NA 8.000 Rigid Restraint ND 0.000 Class B

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report MCIass 2 Pipin Suports McGuire 1 Page 27 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.160A 1-MCA-ND-H76 MCSRD-NDA/sht. 8 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.000 Class B F01.020.163A 1-MCA-ND-H84 MCSRD-NDA/sht. 3 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.000 Class B F01.020.179A 1-MCA-ND-H69 MCSRD-NDA/sht. 4 QAL-14 VT-3 NA 12.000 Rigid Support ND 0.125 Class B F01.020.180A 1-MCA-ND-H15 MCSRD-NDA/sht. 5 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.237 Class B F01.020.202A 1-MCA-NI-H5 MCSRD-NIA/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support NI 0.000 Class B F01.020.203C 1-MCA-NI-H6 MCSRD-NIA/sht. 1 QAL-14 VT-3 NA 8.000 Spring Hgr NI 0.203 Class B F01.020.209B 1-MCR-NI-555 MCSRD-NI-03/sht. 3 QAL-14 VT-3 NA 6.000 Rigid Restraint NI 0.000 Class B F01.020.211C 1-MCR-NI-676 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 4.000 Hyd Snubber NI 0.000 Class B F01.020.212B 1-MCR-NI-685 MCSRD-NI-11/sht.2 QAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Cass 2 Piping SuPPorts McGuire 1 Page 28 Inservice Inspection Plan for Interval 3 Outage 1 12/0312003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.251A 1-MCA-NS-H2 MCSRD-NSC/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.252A 1-MCA-NS-H3 MCSRD-NSC/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.253C 1-MCA-NS-H7 MCSRD-NSB/sht. 1 QAL-14 VT-3 NA 10.000 Spring Hgr NS 0.000 Class B F01.020.254B 1-MCR-NS-655 MCSRD-NS-04/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS 0.000 Class B F01.020.301A 1-MCA-NV-H461 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support NV 0.000 Class B F01.020.302B 1-MCA-NV-H800 MCSRD-NVE/sht. 3 QAL-14 VT-3 NA 4.000 Rigid Restraint NV 0.000 Class B F01.020.303A 1-MCA-NV-H6 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support NV 0.000 Class B F01.020.304A 1-MCA-NV-H8 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support NV 0.000 Class B F01.020.305A 1-MCA-NV-HI 1 MCSRD-NVD/sht. 1 QAL-1 4 VT-3 NA 8.000 Rigid Support NV 0.000 Class B

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping Supports McGuire 1 Page 29 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.306A 1-MCA-NV-H12 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support NV 0.125 Class B F01.020.307A 1-MCA-NV-H13 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support NV 0.250 Class B F01.020.308C 1-MCA-NV-H14 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 6.000 Spring Hgr NV 0.000 Class B F01.020.451A 1-MCR-RN-537 MCSRD-RN-03/sht. 2 QAL-14 VT-3 NA 0.000 Rigid Support RN MC-ISIN-1574-04.00 0.000 Class B F01.020.501C 1-MCA-SA-H19 MCSRD-SAA/sht. 1 QAL-14 VT-3 NA 6.000 Spring Hgr SA 0.000 Class B F01.020.551C 1-MCA-SM-H12 MCSRD-SMA/sht. 2 QAL-14 VT-3 NA 42.000 Hyd Snubber SM 0.000 Class B F01.020.553C 1-MCA-SM-H20 MCSRD-SMA/sht. 2 QAL-14 VT-3 NA 42.000 Hyd Snubber SM 0.000 Class B FO1.020.602C 1-MCA-SV-H1 7 MCSRD-SVA/sht. 2 QAL-14 VT-3 NA 6.000 Hyd Snubber SV 0.000 Class B F01.020.651 C 1-MCA-VQ-H1 0 MCSRD-VQA/sht. 1 QAL-14 VT-3 NA 6.000 Hyd Snubber VQ 0.000 Class B

EOC 15 i DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Pipin Supports McGuire 1 Page 30 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS Total F01.020 Items: 35

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

-Piping Supports McGuire 1 Page 31 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.001A 1-MCA-CA-H86 MCSRD-CAA/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.007A 1-MCA-CA-H100 MCSRD-CAK/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.008A 1-MCA-CA-H103 MCSRD-CAK/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.01OA 1-MCA-CA-H346 MCSRD-CAK/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.01 1C 1-MCA-CA-H347 MCSRD-CAK/sht.1 QAL-14 VT-3 NA 8.000 Mech Snubber CA MC-ISIN-1592-01.01 0.000 Class C F01.030.102A 1-MCA-KC-1042 MCSRD-KC-313/sht.3 QAL-14 VT-3 NA 6.000 Rigid Support KC MC-ISIN-1573-02.02 0.000 Class C F01.030.103A 1-MCA-KC-1304 MCSRD-KC-315/sht.5 QAL-14 VT-3 NA 14.000 Rigid Support KC MC-ISIN-1573-02-00 0.000 Class C F01.030.104C 1-MCA-KC-2137 MCSRD-KC-304/sht.1 QAL-14 VT-3 NA 16.000 Hyd Snubber KC MC-ISIN-1573-01.01 0.000 Class C

EOC 15 1 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report CIass 3 Piping Supports McGuire 1 Page 32 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.105B 1-MCR-KC-556 MCSRD-KC-01/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN-1573-03-00 0.000 Class C F01.030.106B 1-MCR-KC-561 MCSRD-KC-01/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN-1573-03-00 0.000 Class C F01.030.111A 1-MCA-KC-1091 MCSRD-KC-303/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support KC MC-ISIN-1573-01.01 0.000 Class C F01.030.121 B 1-MCR-KC-557 MCSRD-KC-01/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN-1573-03-00 0.000 Class C F01.030.123B 1-MCA-KC-1090 MCSRD-KC-303/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN-1573-01.01 0.000 Class C F01.030.124B 1-MCA-KC-2190 MCSRD-KC-303/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN-1573-01.01 0.000 Class C F01.030.140B 1-MCA-KC-2169 MCSRD-KC-315/sht.3 QAL-14 VT-3 NA 10.000 Rigid Restraint KC MC-ISIN-1573-03-01 0.000 Class C F01.030.141 B I -MCA-KC-2232 MCSRD-KC-315/sht.3 QAL-14 VT-3 NA 14.000 Rigid Restraint KC MC-ISIN-1573-03-01 0.000 Class C F01.030.155A 1-MCA-KD-121 MCSRD-KD-10/sht.2 QAL-14 VT-3 NA 6.000 Rigid Support KD MC-ISIN-1609-01.01 0.000 Class C

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 3 Piping Supports McGuire 1 Page 33 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.161C 1-MCA-LD-65 MCSRD-LD-301/sht.2 QAL-14 VT-3 NA 6.000 Spring Hgr LD MC-ISIN-1609-02.00 0.000 Class C F01.030.162A 1-MCA-LD-171 MCSRD-LD-301/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support LD MC-ISIN-1609-02.00 0.000 Class C F01.030.208B 1-MCA-RN-H979 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 20.000 Rigid Restraint RN MC-ISIN-1574-01.01 0.000 Class C F01.030.209B 1-MCA-RN-2024 MCSRD-RN-301/sht.3 QAL-14 VT-3 NA 18.000 Rigid Restraint RN MC-ISIN-1574-03.00 0.000 Class C F01.030.210B 1-MCA-RN-2330 MCSRD-RN-301/sht.4 QAL-14 VT-3 NA 20.000 Rigid Restraint RN MC-ISIN-1574-03.00 0.000 Class C F01.030.212C 1-MCA-RN-H937 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 18.000 Mech Snubber RN MC-ISIN-1574-01.01 0.000 Class C F01.030.213A 1-MCA-RN-2240 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 30.000 Rigid Support RN MC-ISIN-1574-01.01 0.000 Class C F01.030.214A 1-MCA-RN-1260 MCSRD-RN-316 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN-1574-03.00 0.000 Class C Total F01.030 Items: 25

EOC 15 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Supports Other Than Piping Supports McGuire 1 Page 34 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 I

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.007B 1NDHX-SUPPORT-1A MCM 1201.06-0022 QAL-14 VT-3 NA 0.000 RESIDUAL HEAT REMOVAL HEAT EXCHANGER ND MC-ISIN-1561-01.00 0.750 1A SUPPORT.

Class B MCM 1201.06-48 F01.040.008B 1NSHX-SUPPORT-1A MCM 1201.06-0025 QAL-14 VT-3 NA 0.000 CONTAINMENTSPRAY HEAT 1A EXCHANGER NS MC-ISIN-1563-01.00 0.750 SUPPORT.

Class B F01.040.009B 1REGHX-SUPPORT MCM 1201.06-15 QAL-14 VT-3 NA 0.000 REGENERATIVE HEAT EXCHANGER SUPPORT.

NV MC-ISIN-1554-01.02 0.250 REFERNCE DRAWING MCM 1201.06-61.

Class B MCM 1201.06-0069 FO1.040.036B 1CRAC-SUPPORT-1 MCM 1211.00-0136 QAL-14 VT-3 NA 0.000 CONTROLAIR CHILLER I SUPPORT.

YC MC-ISIN-1618-04.00 0.000 Class C F01.040.037B CRAP-SUPPORT-1 MCM 1201.05-298 QAL-14 VT-3 NA 0.000 CONTROLLED AREA CHILLED WATER PUMP 1 YC MC-ISIN-1618-01.00 0.000 SUPPORT.

Class C F01,040.040A 1CRAAHU-SUPPORT-1A MCM 1211.00-211 QAL-14 VT-3 NA 0.000 CONTROL ROOM AREA AIR HANDLING UNIT 1 YC MC-ISIN-1618-01.00 0.000 SUPPORT.

Class C Total F01.040 Items: 6 Total F01 Items: 77

EOC 15 DUKE ENERGY CORPORATION CATEGORY AUG, Augmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Auamented Examination McGuire 1 Page 35 12/03/2003 Inservice Inspection Plan for Interval 3 Outage 1 ITEM NUMBER ID NUMBER SYS ISO/DW( 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Thermal Stress Piping Examinations ****

G04.001.001 1RPV1-462A-SE MCM 1201.01-113 NDE-310 UT CS-lnconel 6.250 50374 0 DEG.

Circumferential MCM 1201.01-247 0.625 PC. 459-01 TO PC. 446-04 Class A MCFI-1 N138 RPV Head to Dissimilar UHI Tube G04.001.002 1RPV1-462B-SE MCM 1201.01-113 NDE-310 UT CS-lnconel 6.250 50374 90 DEG.

Circumferential MCM 1201.01-247 0.625 PC. 459-01 TO 446-04 Class A MCFI-1NI38 RPV Head to Dissimilar UHI Tube G04.001.004 1RPV1-462D-SE MCM 1201.01-113 NDE-310 UT CS-lnconel 6.250 50374 270 DEG.

Circumferential MCM 1201.01-247 0.625 PC.459-01 TO PC.446-04 Class A MCFI-1 N138 RPV Head to Dissimilar UHI Tube Total G04.001 Items: 3 Total G04 Items: 3

EOC 15 )

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report

• CIass 1 and 2 Piping Welds McGuire 1 Page 36 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS SCi/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Elements Subject to Thermal Fatigue ****

R01.011.013 1NC1FW19-1 MCFI-1NC19 NDE-600 UT SS 2.000

• SEGMENT NC-017.

Circumferential NC MC-ISIN-1553-01.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Pipe to REQUIREMENTS.

Pipe Cap R01.011.014 1NC1F2592 MCFI-1NC-33 NDE-600 UT SS 3.000

• SEGMENT NC-022 IS NOT HSS. THIS WELD Circumferential NC MC-ISIN-1553-01.00 0.438 ADDED AS A RESULT OF DELTA RISK Class A Pipe to EVALUATION.

Pipe *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

R01.011.020 1NC91-2 MCFI-1 NC54 NDE-600 UT SS 6.000

• SEGMENT NC-033.

Circumferential NC MC-ISIN-1553-01.00 0.719 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Pipe to REQUIREMENTS.

Elbow R01.011.021 1NC92-2 MCFI-1 NC52 NDE-600 UT SS 14.000 SEGMENT NC-034.

Circumferential NC MC-ISIN-1553-01.00 1.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Elbow to REQUIREMENTS.

Tee R01.011.022 1NC138-1 MCFI-1NC54 NDE-600 UT SS 6.000

• SEGMENT NC-035.

Circumferential NC MC-ISIN-1553-01.00 0.719 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Pipe to REQUIREMENTS.

Elbow R01.011.026 1RPV1-462C-SE MCFI-1 N138 NDE-310 UT CS-lnconel 6.250 50374 REACTOR VESSEL UPPER HEAD PC. 446-04 TO Circumferential NC MC-ISIN-1553-01.00 0.625 UHI TUBE PC. 459-04 AT 180 DEGREES.

Class A MCM 1201.01-113 Head to SEGMENT NC-089. THIS EXAM IS ADDED Dissimilar Tube ABOVE RI-15I MINIMUM REQUIREMENTS PER EXPERT PANEL. DRAWING #

MCM 1201.01-247.

R01.011.027 1NC1F1664 MCFI-1NC11 NDE-600 UT SS 4.000

• SEGMENT NC-092.

Circumferential NC MC-ISIN-1553-02.01 0.237 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Pipe to REQUIREMENTS.

Reducer R01.011.1 42 1NV1 FW172-28 MCFI-1 NV172 NDE-600 UT SS 2.000

• SEGMENT NV-019AB.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe

EOC 15 DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report Class 1 and 2 Piping Welds McGuire 1 Page 37 Inservice Inspection Plan for Interval 3 Outage 1 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS R01.011.144 1NV1FW175-34 MCFI-1NV175 NDE-600 UT SS 2.000

• SEGMENTNV-019AC.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Reducer R01.011.145 1NV1FW173-29 MCFI-1NV173 NDE-600 UT SS 2.000

• SEGMENT NV-019AC.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe R01.011.147 1NV1FW181-25 MCFI-1NV181 NDE-600 UT SS 2.000

• SEGMENTNV-020AA.

Circumferential NV MC-ISIN-1554-03.00 0.344 Class B Pipe to Pipe R01.011.148 1NV1FW181-24 MCFI-1NV181 NDE-600 UT SS 2.000

• SEGMENT NV-020AA.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS, Pipe R01.011.170 1NV1F4823 MCFI-1NV3 NDE-600 UT SS 2.000

• SEGMENTNV-110B.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Pipe R01.011.201 1RV1F104 MCFI-1RV31 NDE-600 UT CS 12.000

• SEGMENT RV-001.

Circumferential RV MC-ISIN-1604.03-00 0.375 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Pipe Total R01.011 Items: 14

• • • • Elements Subject to Corrosive, Erosive, or Cavitation Wastage ****

R01.013.001 1RV1F104 MCFI-1RV31 NDE-946 UT CS 12.000 STEP SEGMENT RV-001.

Circumferential RV MC-ISIN-1604.03-00 0.375 WEDGE EXAMINE A 1 FT. LENGTH OF PIPE AT WELD TO Class B Elbow to DETERMINE WALL THICKNESS.

Pipe Total R01.013 Items: 1 Total R01 Items: 15

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 2 Refueling Outage EOC 16 ISI Inspection Listing Revision 0

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report IHead Welds McGuire 1 Page 1 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Meridional ****

B01.022.001 1RPV 1-446A MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 7.300 MERIDIONAL WELD AT APPROXIMATELY 36 Class A Head to DEGREES.

Head B01.022.002 1RPV 1-446B MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 7.300 MERIDIONAL WELD AT APPROXIMATELY 108 Class A Head to DEGREES.

Head B01.022.003 1RPV 1-446C MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 7.300 MERIDIONAL WELD AT APPROXIMATELY 180 Class A Head to DEGREES.

Head Total B01.022 Items: 3 Total B01 Items: 3

(

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY B-B. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI VMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Shell-to-Head; Circumferential ****

B02.011.002 1PZR-5 MCM 1201.01-170 NDE-620 UT CS 91.500 50337 PRESSURIZER UPPER HEAD TO SHELL.

Circumferential MCM 1201.01-171 See Corn 3.750 50236A DEPENDING UPON THE EXAMINERS Class A Head to QUALIFICATION, PROCEDURE PDI-UT-6 MAY BE Shell USED IN LIEU OF NDE-620.

Total B02.011 Items: 1 Total B02 Items: 1

(

EOC 16 DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report essurizer McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC iNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle-to-Vessel Welds ****

B03.110.002 1PZR-12 MCM 1201.01-170 NDE-620 UT CS 12.750 50338 PRESSURIZER SPRAY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 See Corn 1.900 50236A HEAD. DEPENDING UPON THE EXAMINERS Class A Nozzle to QUALIFICATION, PROCEDURE PDI-UT-6 MAY BE Head USED IN LIEU OF NDE-620.

B03.110.005 1PZR-15 MCM 1201.01-170 NDE-620 UT CS 15.000 50338 PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 See Corn 1.900 50236A HEAD. X-Y QUADRANT. DEPENDING UPON THE Class A Nozzle to EXAMINERS QUALIFICATION, PROCEDURE Head PDI-UT-6 MAY BE USED IN LIEU OF NDE-620.

B03.110.006 1PZR-16 MCM 1201.01-170 NDE-620 UT CS 15.000 50338 PRESSURIZER RELIEF NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 See Corn 1.900 50236A HEAD.

Class A Nozzle to Y-Z QUADRANT. DEPENDING UPON THE Head EXAMINERS QUALIFICATION, PROCEDURE PDI-UT-6 MAY BE USED IN LIEU OF NDE-620.

Total B03.110 Items: 3

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY B-D. Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report IPressurizer McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC 'NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section ****

B03.120.002 1PZR-12R MCM 1201.01-170 TBD UT CS 12.750 TBD PRESSURIZER SPRAY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. (INSIDE RADIUS SECTION)

Class A Nozzle to Head B03.120.005 1PZR-15R MCM 1201.01-170 TBD UT CS 15.000 TBD PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. X-Y QUADRANT. (INSIDE RADIUS Class A Nozzle to SECTION)

Head B03.120.006 1PZR-16R MCM 1201.01-170 TBD UT CS 15.000 TBD PRESSURIZER RELIEF NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. Y-Z QUADRANT. (INSIDE RADIUS Class A Nozzle to SECTION)

Head Total B03.120 Items: 3

EOC 16 I

(

DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report ESteam Generators (Primary Side) McGuire 1 Page 5

• Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section ****

B03.140.001 1SGA-INLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR 1A Circumferential NC MCM 1201.01-0769 6.500 INLET NOZZLE TO LOWER HEAD. Y-X1 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

B03.140.002 1SGA-OUTLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR 1A Circumferential NC MCM 1201.01-0769 6.500 OUTLET NOZZLE TO LOWER HEAD. Y2-X1 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

B03.140.007 1SGD-INLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR 1D Circumferential NC MCM 1201.01-0769 6.500 INLET NOZZLE TO LOWER HEAD. Y1-X2 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

B03.140.008 1SGD-OUTLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR D Circumferential NC MCM 1201.01-0769 6.500 OUTLET NOZZLE TO LOWER HEAD. Y2-X2 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

Total B03.140 Items: 4 Total B03 Items: 10

I EOC 16 DUKE ENERGY CORPORATION CATEGORY B-G-2. Pressure Restaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. 2 in. And Less In Diani Ater Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.020.001 1PZR-MWB MCM 1201.01-170 QAL-13 VT-1 CS 1.875 PRESSURIZER MANWAY BOLTING (16 BOLTS).

NC MC-ISIN-1553-02.00 7.500 EXAMINE ALL BOLTING MATERIAL.

Class A MCM 1201.01-0048 Total B07.020 Items: 1

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,IDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.060.003 1RCP-1C-S MCM 1201.01-120 QAL-13 VT-1 CS 2.000 SEAL GLAND BOLTING NC MC-ISIN-1553-01.00 8.000 (12 BOLTS, PC. 15). INSPECT BOLTING ON ONE Class A REACTOR COOLANT PUMP ONLY.

B07.060.007 1RCP-1C-H MCM 1201.01-120 QAL-13 VT-1 CS 1.000 SEAL GLAND BOLTING NC MC-ISIN-1553-01.00 3.250 (12 BOLTS, PC. 15). INSPECT BOLTING ON ONE Class A REACTOR COOLANT PUMP ONLY.

Total B07.060 Items: 2

(

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY B-G-2, Pressure Re taining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. 2 in. And Less In Diam Ater Inservice Inspection Database Management System Plan Report McGuire 1 Page 8 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.070.061D1N1-93 MCM 1205.36-0011 QAL-13 VT-1 SS 1.875 10" VALVE, MCFI-1N186.

NI MC-ISIN-1562-02.01 0.000 INSPECT ONLY ONE VALVE IN THIS GROUP Class A (61 A-61 H) PER INTERVAL (ITEM # 4J-055).

Total B07.070 Items: 1 Total B07 Items: 4

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY B-K. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping. Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW( GNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

B10.010.002 1PZR-W13A MCM 1201.01-170 NDE-25 MT CS 6.000 WELDED ATTACHMENT. PRESSURIZER NC MCM 1201.01-0048 4.000 SEISMIC LUG TO SHELL. Y-Z QUADRANT.

Class A MCM 1201.01-140 Seismic Lug to Shell B10.010.003 1PZR-W13B MCM 1201.01-170 NDE-25 MT CS 6.000 WELDED ATTACHMENT. PRESSURIZER NC MCM 1201.01-0048 4.000 SEISMIC LUG TO SHELL. X-Y QUARANT.

Class A MCM 1201.01-140 Seismic Lug to Shell Total B10.010 Items: 2 Total B10 Items: 2

EOC 16

( (

DUKE ENERGY CORPORATION CATEGORY B-N-1 Interior Of Reactor Vessel INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Vessel Interior ****

B13.010.001 1RPV-INTERIOR MCM 1201.01-146 QAL-14 VT-3 SS 0.000 REACTOR VESSEL INTERIOR. AREAS TO BE NC MC-ISIN3-1553-01.00 0.000 EXAMINED SHALL INCLUDE THE SPACES Class A MCM 1201.01-223 ABOVE AND BELOW THE REACTOR CORE THAT ARE MADE ACCESSIBLE FOR EXAMINATION BY REMOVAL OF COMPONENTS DURING NORMAL REFUELING OUTAGES.

INSPECT ONCE EACH INSPECTION PERIOD.

Total B13.010 Items: 1 Total B13 Items: 1

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY C-A. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report Shell Circumferential Welds McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUt MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.010.090 1RCHPA-8-1 MCM 1201.04-197 NDE-3630 UT SS 6.660 50319 RECIPROCATING CHARGING PUMP Circumferential NV MC-ISIN3-1554-03.00 0.495 ACCUMULATOR.

Class B Flange to Shell C01.010.100 1ASWIF-1 MCM 1201.04-27 NDE-3630 UT SS 4.000 50424 SEAL WATER INJECTION FILTER 1A.

Circumferential NV MC-ISIN3-1554-03.00 0.438 Class B Shell to Upper Flange C01.010.101 1ASWIF-2 MCM 1201.04-27 NDE-3630 UT SS 4.000 50424 SEAL WATER INJECTION FILTER 1A.

Circumferential NV MC-ISIN3-1554-03.00 0.438 Class B Shell to Lower Flange Total C01.010 Items: 3

EOC 16 A I, DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

• Head Circumferential Welds McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI OIBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.020.080 1RCHPA-10-1 MCM 1201.04-197 NDE-3630 UT SS 6.660 50319 RECIPROCATING CHARGING PUMP Circumferential NV MC-ISIN3-1554-03.00 0.495 ACCUMULATOR.

Class B Shell to Head Total C01.020 Items: 1 Total C01 Items: 4

EOC 16 DUKE ENERGY CORPORATION 6

CATEGORY C-C. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments C03.020.022 1-MCA-ND-H16 MCSRD-NDA/sht. 5 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint ND MC-ISIN-1561-01.00 1.000 F01.020.185B.

Class B 1-MCA-ND-H16 C03.020.026 1-MCA-ND-H24 MCSRD-NDA/sht. 2 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Spring Hgr ND MC-ISIN-1561-01.00 0.125 F01.020.187C.

Class B 1-MCA-ND-H24 C03.020.032 1-MCA-NI-H278 MC-1190-NV-01-01 NDE-35 PT SS 4.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint Ni MC-ISIN-1554-03.01 0.125 F01.020.235B.

Class B 1-MCA-NI-H278 C03.020.045 1-MCA-NS-H87 MCSRD-NSB/sht. 1 NDE-35 PT SS 10.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint NS MC-ISIN-1563-01.00 0.125 F01.020.278B.

Class B 1-MCA-NS-H87 C03.020.051 1-MCA-NV-H321 MCSRD-NVA/sht. 3 NDE-35 PT SS 3.000 WELDED ATTACHMENT. INSPECT WITH Spring Hgr NV MC-ISIN-1554-01.01 0.125 F01.020.345C.

Class B 1-MCA-NV-H321 C03.020.052 1-MCA-NV-H322 MCSRD-NVA/sht. 3 NDE-35 PT SS 3.000 WELDED ATTACHMENT. INSPECT WITH Spring Hgr NV MC-ISIN-1554-01.01 0.125 F01.020.346C.

Class B 1-MCA-NV-H322 Total C03.020 Items: 6 Total C03 Items: 6

1' EOC 16 (

DUKE ENERGY CORPORATION CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC) NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.010.001 1CBD-SUPPORT MCM 1201.09-0004 QAL-13 VT-1 NA 0.000 CATION BED DEMINERALIZER WELDED NV MC-ISIN-1554-04.00 0.190 ATTACHMENT.

Class C D01.010.002 1MBD-SUPPORT-1A MCM 1201.09-0006 QAL-13 VT-1 NA 0.000 MIXED BED DEMINERALIZER 1A WELDED NV MC-ISIN-1554-04.00 0.250 ATTACHMENT.

Class C D01.010.004 1LDF-SUPPORT-1A MCM 1218.04-0003 QAL-13 VT-1 NA 0.000 DIESEL GENERATOR LUBE OIL FILTER 1A LD MC-ISIN-1609-02.00 0.250 WELDED ATTACHMENT.

Class C Total D01.010 Items: 3

EOC 16 DUKE ENERGY CORPORATION C

CATEGORY D-A, Welded Attachiments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping, Pumps, And V.alves Inservice Inspection Database Management System Plan Report McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.020.081 1-MCA-SA-H42 MCSRD-SAA/sht.3 QAL-13 VT-1 CS 6.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support SA MC-ISIN-1593-01.02 0.500 F01.030.0261 B.

Class C 1-MCA-SA-H42 Total D01.020 Items: 1 Total D01 Items: 4

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Cass 1 Pipin Supports McGuire 1 Page 16 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.010.006B 1-MCR-NC-544 MCSRD-NC-03/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Restraint NC 0.000 Class A F01.010.010C 1-MCR-NC-564 MCSRD-NC-03/sht. 1 QAL-14 VT-3 NA 4.000 Hyd Snubber NC 0.000 Class A F01.010.011 C 1-MCR-NC-565 MCSRD-NC-03/sht. 2 QAL-14 VT-3 NA 6.000 Hyd Snubber NC 0.000 Class A F01.010.012C 1-MCR-NC-566 MCSRD-NC-03/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber NC 0.000 Class A F01.010.024C 1-MCR-NC-801 MCSRD-NI-13/sht. 2 QAL-14 VT-3 NA 1.500 Hyd Snubber NC 0.000 Class A F01.010.052B 1-MCR-ND-505 MCSRD-ND-01/sht. 1 QAL-14 VT-3 NA 14.000 Rigid Restraint ND 0.000 Class A F01.010.105C 1-MCR-NI-531 MCSRD-NI-01/sht. 3 QAL-14 VT-3 NA 10.000 Mech Snubber NI 0.000 Class A F01.010.106B 1-MCR-NI-534 MCSRD-NI-01/sht. 3 QAL-14 VT-3 NA 10.000 Rigid Restraint NI 0.000 Class A

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Cass 1 pii Suports McGuire 1 Page 17 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.010.115C1-MCR-NI-611 MCSRD-NI-01/sht.3 QAL-14 VT-3 NA 10.000 Spring Hgr Ni 0.000 Class A F01.010.116A 1-MCR-NI-614 MCSRD-NI-01/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support NI 0.000 Class A F01.010.153C 1-MCR-NV-852 MCSRD-NV-06/sht. 1 QAL-14 VT-3 NA 2.000 Hyd Snubber NV 0.000 Class A Total F01.010 Items: 11

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping SuDports McGuire 1 Page 18

• Inservice Inspection Plan for Interval 3 Outage 2 12/0312003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ****

F01.020.011 A 1-MCA-CA-H429 MCSRD-CAO/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support CA 0.000 Class B F01.020.012A 1-MCA-CA-H457 MCSRD-CAO/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Support CA *0.000 Class B F01.020.156A 1-MCA-ND-H29 MCSRD-NDA/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.000 Class B F01.020.158A 1-MCA-ND-H64 MCSRD-NDA/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support ND 0.000 Class B F01.020.162C 1-MCA-ND-H82 MCSRD-NDA/sht. 3 QAL-14 VT-3 NA 8.000 Spring Hgr ND 0.000 Class B F01.020.167C 1-MCA-ND-H247 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 14.000 Hyd Snubber ND 0.000 Class B F01.020.184B 1-MCA-ND-H264 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint ND 0.000 Class B F01.020.185B 1-MCA-ND-H16 MCSRD-NDA/sht. 5 QAL-14 VT-3 NA 8.000 Rigid Restraint ND 1.000 Class B

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping Supports McGuire 1 Page 19 Inservice Inspection Plan for Interval 3 Outage 2 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.186B 1-MCA-ND-H335 MCSRD-NIO/sht. 1 QAL-14 VT-3 NA 18.000 Rigid Restraint ND 0.750 Class B F01.020.187C 1-MCA-ND-H24 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Spring Hgr ND 0.125 Class B F01.020.214A 1-MCR-NI-696 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NI 0.000 Class B F01.020.215A 1-MCR-NI-H240 MCSRD-NIO/sht. 1 QAL-14 VT-3 NA 24.000 Rigid Support NI 0.000 Class B F01.020.216A 1-MCR-NI-698 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NI 0.000 Class B F01.020.219B 1-MCR-NI-708 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B F01.020.220B 1-MCR-NI-712 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B F01.020.221B 1-MCR-NI-713 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class B F01.020.235B 1-MCA-NI-H278 MC-1190-NV-01-01 QAL-14 VT-3 NA 4.000 Rigid Restraint NI 0.125 Class B

I EOC 16 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping Supports McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 2 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.236A 1-MCR-NI-501 MCSRD-NI-01/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NI 0.000 Class B F01.020.255A 1-MCA-NS-H13 MCSRD-NSB/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.256A 1-MCA-NS-H17 MCSRD-NSA/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.257A 1-MCA-NS-H22 MCSRD-NSA/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.258A 1-MCA-NS-H25 MCSRD-NSA/sht. 2 QAL-14 VT-3 NA 10.000 Rigid Support NS 0.000 Class B F01.020.259C 1-MCA-NS-H28 MCSRD-NSA/sht. 2 QAL-14 VT-3 NA 10.000 Spring Hgr NS 0.000 Class B F01.020.278B 1-MCA-NS-H87 MCSRD-NSB/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Restraint NS 0.125 Class B F01.020.280B 1-MCR-NS-501 MCSRD-NS-01/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Restraint NS 0.000 Class B F01.020.281B 1-MCR-NS-502 MCSRD-NS-01/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Restraint NS 0.000 Class B

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping Supports McGuire 1 Page 21 E~~~~~~~~~~~~~~~~~Pq P 12/03/2003 Inservice Inspection Plan for Interval 3 Outage 2 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.309A 1-MCA-NV-H15 MCSRD-NVD/sht. 3 QAL-14 VT-3 NA 6.000 Rigid Support NV 0.125 Class B F01.020.31 0A 1-MCA-NV-H 16 MCSRD-NVD/sht. 3 QAL-14 VT-3 NA 6.000 Rigid Support NV 0.000 Class B F01.020.311C 1-MCA-NV-H17 MCSRD-NVD/sht. 3 QAL-14 VT-3 NA 6.000 Spring Hgr NV 0.000 Class B F01.020.312B MC-1683-NV.1 1-R16 MC-1683-NV.1 1 QAL-14 VT-3 NA 3.000 Rigid Restraint NV 0.000 Class B F01.020.313B MC-1683-NV.1 1-R18 MC-1683-NV.11 QAL-14 VT-3 NA 3.000 Rigid Restraint NV 0.000 Class B FO1.020.314C MC-1683-NV.11-R20 MC-1683-NV.11 QAL-14 VT-3 NA 3.000 Mech Snubber NV 0.000 Class B F01.020.3151B 1-MCA-NV-H22 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Restraint NV 0.000 Class B F01.020.345C 1-MCA-NV-H321 MCSRD-NVA/sht. 3 QAL-14 VT-3 NA 3.000 Spring Hgr NV 0.125 Class B F01.020.346C 1-MCA-NV-H322 MCSRD-NVA/sht. 3 QAL-14 VT-3 NA 3.000 Spring Hgr NV 0.125 Class B

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report MClass 2 Piin Suorts McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.562C 1-MCA-SM-H150 MCSRD-SMA/sht. 5 QAL-14 VT-3 NA 42.000 Spring Hgr SM 0.000 Class B F01.020.564C 1-MCA-SM-H164 MCSRD-SMA/sht. 5 QAL-14 VT-3 NA 42.000 Mech Snubber SM 0.000 Class B F01.020.701B 1-MCR-WL-785 MCSRD-WL-07/sht. 4 QAL-14 VT-3 NA 6.000 Rigid Restraint WL 0.000 Class B Total F01.020 Items: 38

EOC 16 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report CMass 3 Piin Su Morts McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 2 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.005A 1-MCA-CA-H105 MCSRD-CAJ/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.006A 1-MCA-CA-H106 MCSRD-CAJ/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.009A 1-MCA-CA-H104 MCSRD-CAK/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support CA MC-ISIN-1592-01.01 0.000 Class C F01.030.101A 1-MCA-KC-1014 MCSRD-KC-304/sht.2 QAL-14 VT-3 NA 20.000 Rigid Support KC MC-ISIN-1573-01.01 0.000 Class C F01.030,132B 1-MCA-KC-1009 MCSRD-KC-315/sht.1 QAL-14 VT-3 NA 10.000 Rigid Restraint KC MC-ISIN-1573-01.00 0.000 Class C F01.030.133B 1-MCA-KC-1007 MCSRD-KC-315/sht.2 QAL-14 VT-3 NA 20.000 Rigid Restraint KC MC-ISIN-1573-01.00 0.000 Class C F01.030.134C 1-MCA-KC-1102 MCSRD-KC-315/sht.1 QAL-14 VT-3 NA 8.000 Hyd Snubber KC MC-ISIN-1573-01.00 0.000 Class C F01.030.136C 1-MCA-KC-2105 MCSRD-KC-315/sht.2 QAL-14 VT-3 NA 16.000 Spring Hgr KC MC-ISIN-1573-01.00 0.000 Class C

(

EOC 16 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Mt 3s 3PipingSupports McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.138C 1-MCA-KC-1 066 MCSRD-KC-304/sht.2 QAL-14 VT-3 NA 20.000 Hyd Snubber KC MC-ISIN-1573-01.01 0.000 Class C F01.030.139B -MCA-KC-1008 MCSRD-KC-315/sht.2 QAL-14 VT-3 NA 16.000 Rigid Restraint KC MC-ISIN-1573-01.00 0.000 Class C F01.030.171B 1-MCA-RN-2524 MCSRD-RN-302 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN-1574-02.00 0.000 Class C F01.030.172B 1-MCA-RN-1076 MCSRD-RN-303/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN-1574-02.00 0.000 Class C F01.030.173B 1-MCA-RN-1077 MCSRD-RN-303/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN-1574-02.00 0.000 Class C F01.030.251B 1-MCA-RV-H209 MCSRD-RN-309/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint RV MC-ISIN-1604-03.00' 0.000 Class C F01.030.261B 1-MCA-SA-H42 MCSRD-SAA/sht.3 QAL-14 VT-3 NA 6.000 INSPECT WITH D01.020.081.

Rigid Restraint SA MC-ISIN-1593-01.02 0.500 Class C F01.030.262B 1-MCA-SA-H28 MCSRD-SAAlsht. 2 QAL-14 VT-3 NA 6.000 Rigid Support SA 0.000 Class C F01.030.263C 1-MCA-SA-H27 MCSRD-SAA/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber SA 0.000 Class C

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 3 Pipina Supports McGuire 1 Page 25 Inservice Inspection Plan for Interval 3 Outage 2 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.286C 1-MCA-YC-108 MCSRD-YC-305/sht.2 QAL-14 VT-3 NA 5.000 Spring Hgr YC MC-ISIN-1618-01.00 0.000 Class C F01.030.287C 1-MCA-YC-109 MCSRD-YC-305/sht.2 QAL-14 VT-3 NA 5.000 Hyd Snubber YC MC-ISIN-1618-01.00 0.000 Class C Total F01.030 Items: 19

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Supports Other Than Piping Supports McGuire 1 Page 26 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 E

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.031B 1DG-SUPPORT-1A MCM 1301.00-02 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR ENGINE SUPPORT 1A KD MC-ISIN-1609-01.00 0.000 (DIESEL ENGINE DRIVEN LUBE OIL PUMP 1A).

Class C F01.040.032B 1LDF-SUPPORT-1A MCM 1218.04-0003 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR LUBE OIL FILTER 1A LD MC-ISIN-1609-02.00 0.250 SUPPORT.

Class C F01.040.034B 1LDST-SUPPORT-1A MCM 1218.01-0036 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR LUBE OIL INTAKE LD MC-ISIN-1609-02.00 0.000 STRAINER 1A SUPPORT.

Class C F01.040.038A 1CBD-SUPPORT MCM 1201.09-0004 QAL-14 VT-3 NA 0.000 CATION BED DEMINERALIZER SUPPORT.

NV MC-ISIN-1554-04.00 0.190 Class C F01.040.039A 1MBD-SUPPORT-1A MCM 1201.09-0006 QAL-14 VT-3 NA 0.000 MIXED BED DEMINERALIZER 1A SUPPORT.

NV MC-ISIN-1554-04.00 0.250 Class C F01.040.041B 1LDHX-SUPPORT MCM 1201.06-0021 QAL-14 VT-3 NA 0.000 VERTICAL LETDOWN HEAT EXCHANGER KC MC-ISIN-1573-02.00 0.375 SUPPORT. REFERNCE MANUAL MCM Class C MC-1220-39 1201.06-54.

F01.040.043A 1WEPEC-SUPPORT MCM 1201.09-37 QAL-14 VT-3 NA 0.000 WASTE EVAP. PACKAGE EVAP. CONDENSER KC MC-ISIN-1573-02.02 0.000 SUPPORT.

Class C F01.040.044A REPEC-SUPPORT MCM 1201.09-37 QAL-14 VT-3 NA 0.000 RECYCLE EVAPAPORATOR PACKAGE KC MC-ISIN-1573-02.02 0.000 EVAPAPORATOR CONDENSER SUPPORT.

Class C

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Su~ports Other Than Piping Supports McGuire 1 Page 27 n no M Inservice Inspection Plan for Interval 3 Outage 2 1 Z/0U30uu0j ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.040.045A 1CCERACC-SUPPORT MCM 1211.00-0136 QAL-14 VT-3 NA 0.000 CONTROL CABLE AND EQUIPMENT ROOM AIR RN MC-ISIN-1574-02.00 0.000 CONDITIONING CONDENSER 1A SUPPORT.

Class C Total F01.040 Items: 9 Total F01 Items: 77

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MCIass 1 and 2 Piping Welds McGuire 1 Page 28 12103/2003 Inservice Inspection Plan for Interval 3 Outage 2 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Elements Subject to Thermal Fatigue ****

R01.011.008 1SGD-OUTLET-W6SE MC1676-4 NDE-2930 UT SS-CS 31.000 5149697 STEAM GENERATOR D OUTLET NOZZLE.

Circumferential NC MCM 1201.01-0782 2.500 5158172 DRAWING # MC-ISIN-1553-01.00. SEGMENT Class A Term end MCM 1201.01-0769 Nozzle to NC-008.

Dissimilar Safe End R01.0l1.015 1NC1F-1492 MCFI-1NC34 NDE-2090 UT SS 1.500 TBD SEGMENTNC-024.

Circumferential NC MC-ISIN-1553-01.00 160 0.281 Class A MC-1676-4.1 Pipe to Sweepolet R01.011.019 1NC1 54-2 MCFI-1 NC-54 NDE-600 UT SS 6.000 SEGMENT NC-032.

Circumferential NC MC-ISIN-1553-01.00 0.719 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Elbow to REQUIREMENTS.

Pipe R01.011.051 1ND48-2 MCFI-1 ND27 NDE-600 UT SS 8.000

• SEGMENT ND-008A.

Circumferential ND MC-ISIN-1561-01.00 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Pipe R01.011.052 1ND46-3 MCFI-1 ND27 NDE-600 UT SS 8.000

• SEGMENT ND-009A.

Circumferential ND MC-ISIN-1561-01.00 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Pipe R01.011.076 1NI1F36 MCFI-1NI92 NDE-600 UT SS 4.000

• SEGMENT NI-030A.

Circumferential NI MC-ISIN-1562-03.00 0.337 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Tee to REQUIREMENTS.

Pipe R01.011.077 1NI1F19 MCFI-1N193 NDE-12 RT SS 6.000 SEGMENT NI-042.

Circumferential NI MC-ISIN-1562-03.00 0.134 Class B Tee to Elbow R01.011.078 1NI1F1134 MCFI-1NI21 NDE-600 UT SS 18.000

• SEGMENTNI-059.

Circumferential NI MC-ISIN-1562-03.01 0.250 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Elbow

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MClass 1 and 2 Piping Welds McGuire 1 Page 29 Inservice Inspection Plan for Interval 3 Outage 2 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS R01.011.079 1N133A-1 MCFI-1N121 NDE-600 UT SS 18.000

• SEGMENT NI-059.

Circumferential NI MC-ISIN-1562-03.01 0.250 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Elbow R01.011.080 1NI1F1154 MCFI-1N121 NDE-600 UT SS 18.000

• SEGMENTNI-060.

Circumferential NI MC-ISIN-1562-03.01 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Elbow R01.011.138 1NVP631-1 MCFI-1NV15 NDE-12 RT SS 3.000 SEGMENTNV-002L.

Circumferential NV MC-ISIN-1554-03.01 0.120 Class B Pipe to Elbow R01.011.150 1NVP888-1 MCFI-1NV175 NDE-600 UT SS 2.000

• SEGMENT NV-020AF.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Pipe R01.011.151 1NV1FW173-13 MCFI-1NV173 NDE-600 UT SS 2.000

• SEGMENTNV-020AF.

Circumferential NV MC-ISIN-1554-03.00 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe R01.011.152 1NV1F354 MCFI-1NV5 NDE-600 UT SS 2.000

• SEGMENT NV-020AG.

Circumferential NV MC-ISIN-1554-01.01 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Elbow R01.011.221 1WL1F7651 MCFI-1WL127 NDE-12 RT SS 4.000

• SEGMENT WL-002A.

Circumferential WL MC-ISIN-1565-01.00 0.120 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe R01.011.222 1WLP679-1 MCFI-1WL127 NDE-12 RT SS 4.000

• SEGMENT WL-002A.

Circumferential WL MC-ISIN-1565-01,00 0.120 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Pipe R01.011.223 1WL1F3063 MCFI-1 WL84 NDE-12 RT SS 6.000 SEGMENT WL-009A.

Circumferential WL MC-ISIN-1565-07.00 0.134 Class B Pipe to Flange

EOC 16 (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System IClass 1 and 2 Piping Welds McGuire 1 Inservice Inspection Plan for Interval 3 Outage 2 Plan Report Page 30 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS Total R01.011 Items: 17 Total R01 Items: 17

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 3 Refueling Outage EOC 17 ISI Inspection Listing Revision 0

EOC 17 DUKE ENERGY CORPORATION CATEGORY B-B, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report OPressurizer McGuire 1 Page 1 E Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Shell-to-Head; Circumferential ****

B02.011.001 1PZR-1 MCM 1201.01-170 NDE-620 UT CS 91.500 50337 PRESSURIZER LOWER HEAD TO SHELL.

Circumferential MCM 1201.01-171 PDI-UT-6 3.750 50236A Class A Head to Shell Total B02.011 Items: 1

• • • • Shell-to-Head; Longitudinal B02.012.002 1PZR-9 MCM 1201.01-170 NDE-620 UT CS 91.500 50337 PRESSURIZER UPPER HEAD TO SHELL.

Longitudinal MCM 1201.01-171 PDI-UT-6 3.750 50236A Class A Head to Shell Total B02.012 Items: 1 Total B02 Items: 2

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report

.Reactor Vessel McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Head Nuts ****

B06.010.009 RPV-449-02-09 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.010 1RPV-449-02-10 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.011 1RPV-449-02-11 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.016 1RPV-449-02-16 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.017 1RPV-449-02-17 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.018 1RPV-449-02-18 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.019 RPV-449-02-19 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.020 1RPV-449-02-20 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01 -206 1.770

EOC 17 DUKE ENERGY CORPORATION (1'

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Boltinq, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.021 1RPV-449-02-21 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.022 1RPV-449-02-22 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.023 1RPV-449-02-23 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.024 RPV-449-02-24 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.025 1RPV-449-02-25 MCM 1201.01-204 QAL-13 VT-I CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.026 RPV-449-02-26 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.027 RPV-449-02-27 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.028 1RPV-449-02-28 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.029 RPV-449-02-29 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.030 1RPV-449-02-30 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.031 1RPV-449-02-31 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.032 1RPV-449-02-32 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.033 1RPV-449-02-33 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.034 1RPV-449-02-34 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.035 1RPV-449-02-35 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.036 1RPV-449-02-36 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 Total B06.010 Items: 24

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Studs, when removed ****

B06.030.016 1RPV-449-01-16 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.016A 1RPV-449-01-16 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.017 1RPV-449-01-17 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.017A1RPV-449-01-17 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.018 RPV-449-01-18 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.018A 1RPV-449-01-18 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.019 1RPV-449-01-19 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.019A 1RPV-449-01 -19 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.020 1RPV-449-01-20 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.020A1RPV-449-01-20 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURESTUD MCM 1201.01-206 57.688 Class A B06.030.021 1RPV-449-01-21 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.021A1RPV-449-01-21 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.022 1RPV-449-01-22 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.022A1RPV-449-01-22 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.023 1RPV-449-01-23 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.023A 1RPV-449-01-23 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.024 1RPV-449-01-24 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.024A 1RPV-449-01 -24 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.025 1RPV-449-01-25 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.025A 1RPV-449-01-25 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.026 1RPV-449-01-26 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.026A 1RPV-449-01-26 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.027 1RPV-449-01-27 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.027A1RPV-449-01-27 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.028 1RPV-449-01-28 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.028A1RPV-449-01-28 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A

EOC 17 DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 8 12103/2003 Inservice Inspection Plan for Interval 3 Outage 3 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.029 1RPV-449-01-29 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.029A 1RPV-449-01-29 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.030 1RPV-449-01-30 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.030A 1RPV-449-01-30 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.031 1RPV-449-01-31 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.031 A1 RPV-449-01-31 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.032 1RPV-449-01-32 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.032A 1RPV-449-01-32 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.033 1RPV-449-01-33 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Weactor Vessel McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.033A 1RPV-449-01-33 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.034 1RPV-449-01-34 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.034A 1 RPV-449-01-34 MCM 1201.01.204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.035 1RPV-449-01-35 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.035A 1RPV-449-01-35 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.036 1RPV-449-01-36 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.036A 1RPV-449-01-36 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A Total B06.030 Items: 42

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Closure Washers, Bushings ****

B06.050.009 1RPV-449-03-09 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.010 1RPV-449-03-10 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.011 1RPV-449-03-11 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.016 1RPV-449-03-16 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050,017 1RPV-449-03-17 MCM 1201.01-204 QAL-13 VT-i CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.018 1RPV-449-03-18 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.019 1RPV-449-03-19 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.020 1RPV-449-03-20 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.050.021 1RPV-449-03-21 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.022 1RPV-449-03-22 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.023 1RPV-449-03-23 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.024 1RPV-449-03-24 MCM 1201.01-204 QAL-13 VT-I CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.025 1RPV-449-03-25 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.026 1RPV-449-03-26 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A 806.050.027 1RPV-449-03-27 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.028 1RPV-449-03-28 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.029 1RPV-449-03-29 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A

1, EOC 17 DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.050.030 1RPV-449-03-30 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.031 1RPV-449-03-31 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.032 1RPV-449-03-32 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.033 1RPV-449-03-33 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.034 1RPV-449-03-34 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.035 1RPV-449-03-35 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.036 1RPV-449-03-36 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A Total B06.050 Items: 24

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Steam Generators McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO)'DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.100.001 1SGA-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.002 1SGA-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.003 1SGB-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR B PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.004 1SGB-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR B PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.005 1SGC-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR C PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.006 1SGC-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR C PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.007 1SGD-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1D PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.008 1SGD-MW-Xl-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR D PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

Total B06.100 Items: 8

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.190.001 1RCP-1A-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1A MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.002 1RCP-1B-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP B MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.003 1RCP-1C-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP C MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.004 1RCP-1D-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP D MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A Total B06.190 Items: 4 Total B06 Items: 102

EOC 17 1 (

DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 3 12103/2003 ITEM NUMBER ID NUMBER SYS ISO, /DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.050.001 1NC5-FL1 MCFI-1NC5 QAL-13 VT-1 SS 1.375 FLANGE BOLTING (12 STUDS). BOLT SIZE NC MC-ISIN3-1553-02.00 10.000 DETERMINED USING CHART IN M/P101A17650101 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

B07.050.002 1NC5-FL2 MCFI-1NC5 QAL-13 VT-1 SS 1.375 FLANGE BOLTING (12 STUDS). BOLTSIZE NC MC-ISIN3-1553-02.00 10.000 DETERMINED USING CHART IN M/P/0/A/7650/01 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

Total B07.050 Items: 2

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-2. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting! 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 16 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,IDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.070.064F 1NI-1 81 MCM 1205.00-0005 QAL-13 VT-1 SS 1.375 6" VALVE, MCFI-1NI85. INSPECT ONLY ONE NI MC-ISIN3-1562-03.01 0.000 VALVE INTHIS GROUP (64A-64F) PER INTERVAL Class A (ITEM # 4J-008).

Total B07.070 Items: 1

EOC 17 t DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report MCRD Housings McGuire Page 17 E Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.080.001 1CRD-HOUSING MCM 1201.01-224 QAL-13 VT-1 SS 0.000 APPLIES TO 53 CRD HOUSINGS. EXAMINE ONLY NC MC-ISIN3-1553-01.00 6.000 CRD BOLTING THAT IS REUSED WHEN Class A MCM 1201.13-35 HOUSING IS REASSEMBLED.

Total B07.080 Items: 1 Total B07 Items: 4

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-K, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWi 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

B10.010.004 1PZR-W13C MCM 1201.01-170 NDE-25 MT CS 6.000 WELDED ATTACHMENT. PRESSURIZER NC MCM 1201.01-0048 4.000 SEISMIC LUG TO SHELL. W-X QUADRANT.

Class A MCM 1201.01-140 Seismic Lug to Shell B10.010.005 1PZR-W13D MCM 1201.01-170 NDE-25 MT CS 6.000 WELDED ATTACHMENT. PRESSURIZER NC MCM 1201.01-0048 4.000 SEISMIC LUG TO SHELL. W-Z QUADRANT.

Class A MCM 1201.01-0140 Seismic Lug to Shell Total B10.010 Items: 2 Total B10 Items: 2

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-L-2, Pump Casings INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 19 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Pump Casing ****

B12.020.001 1RCP-1A MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP ACASING NC MC-ISIN3-1553-01 .00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.002 1RCP-1B MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP B CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.003 1RCP-1C MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1C CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.004 RCP-1D MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1D CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

Total B12.020 Items: 4

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Valve Body, Exceeding NPS 4 ****

B12.050.001A iNC-1 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0001).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1,1 NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIROR VOLUMETRIC EXAMINATION.

B12.050.001B 1NC-2 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0002).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001C 1NC-3 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0003).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 I NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.002A 1ND-1 B MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 °.°° INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 I ND-1B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.002B 1ND-2A MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003A 1NI-54A MCM-1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-005). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI79 VALVES: 1NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003B 1NI-65B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE,

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003C 1NI-76A MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: 1NI-54A, 1N-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003D1NI-88B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N186 VALVES: 1NI-54A, 1N-65B, 1NI-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004A 1NI-59 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N179 VALVES: 1N-59, 1N-60, 1NI-70, 1N-71, 1NI-81, 1N-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004B 1NI-60 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N179 VALVES: 1N-59, 1N-60, 1N-70,1 N-71, 1N-81, 1NI-82, 1Nl-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004C1NI-70 MC 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1NI-59, 1N-60, 1N-70, 1N-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004D 1NI-71 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N162 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004E 1NI-81 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: 1NI-59,1 N-60, 1NI-70, 1N-71, 1NI-81, 1NI-82,1 N-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004F 1N1-82 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1NI-59, 1N-60, 1N-70, 1NI-71,1 N-81, 1NI-82, 1Nl-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004G1N-93 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1NI-59, 1N-60, 1NI-70, 1N-71, 1N-81, 1N-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004H 1N1-94 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N186 VALVES: 1NI-59, 1N-60, 1N-70,1 N-71, 1NI-81, 1NI-82, 1Nl-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.005A 1NI-125 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 N153 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.005B 1NI-129 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1NI53 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006A1INI-126 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126,1 NI-134, 1NI -157,1 NI-175, 1N-1 80, 1Nl-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006B 1NI-134 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1N-1 80, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B1i2.050.006C 1NI-157 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006D 1NI-175 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.006E 1NI-180 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1N-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006F 1NI-181 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007A 1NI-160 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI35 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007B 1NI-176 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI78 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

Total B12.050 Items: 27 Total B12 Items: 31

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY B-O. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Control Rod Housing Inservice Inspection Database Management System Plan Report Oeaor essel McGuire Page 25 N Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISOIDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welds in CRD Housing

• B14.010.010 1RPV-CRDM-64 MCM 1201 .01-224 NDE-35 PT SS-Inconel 4.000 CRD HOUSING WELD. (PERIPHERAL)

NC MC-ISIN3-1 553-01.00 0.642 Class A Total 14.01 0 Items: 1 Total B14 Items: 1

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

.Head Circumferential Welds McGuire 1 Page 26 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NU MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.020.090 1RCHPSS-SH-3 MCM 1201.04-272 NDE-3630 UT SS 12.000 50313 RECIPROCATING CHARGING PUMP SUCTION Circumferential NV MC-ISIN3-1554-03.00 0.375 STABLIZER.

Class B Shell to Upper Head C01.020.091 1RCHPSS-SH-2 MCM 1201.04-272 NDE-3630 UT SS 12.000 50313 RECIPROCATING CHARGING PUMP SUCTION Circumferential NV MC-ISIN3-1554-03.00 0.375 STABLIZER.

Class B Shell to Lower Head Total C01.020 Items: 2 Total C01 Items: 2

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY C-B, Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels Inservice Inspection Database Management System Plan Report

• Nozzles in Vessels <= 1/2 in. Nominal Thickness McGuire 1 Page 27 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 E

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Nozzle-to-Shell (Nozzle to Head or Nozzle to Nozzle) Weld C02.011.001 1RCHPSS-INLET MCM 1201.04-272 NDE-35 PT SS 4.000 RECIPROCATING CHARGING PUMP SUCTION NV MC-ISIN3-1554-03.00 0.375 STABLIZER.

Class B Inlet Nozzle to Shell C02.011.002 1RCHPSS-OUTLET MCM 1201.04-272 NDE-35 PT SS 4.000 RECIPROCATING CHARGING PUMP SUCTION NV MC-ISIN3-1554-03.00 0.375 STABLIZER.

Class B Outlet Nozzle to Shell Total C02.011 Items: 2 Total C02 Items: 2

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps. And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 28 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC3 NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.010.003 1RCHPSS-SUPPORT MCM 1201.04-272 NDE-35 PT CS 12.000 RECIPROCATING CHARGING PUMP SUCTION NV MC-ISIN3-1554-03.00 0.375 STABLIZER SUPPORT.

Class B WELDED ATTACHMENT.

Total C03.010 Items: 1

EOC 17 (

DUKE ENERGY CORPORATION

(

CATEGORY C-C. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping, Pumps. And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 29 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.020.024 1-MCA-ND-H49 MCSRD-NDA/sht. 7 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support ND MC-ISIN3-1561-01.00 0.125 F01.020.182A.

Class B 1-MCA-ND-H49 C03.020.025 1-MCA-ND-H63 MCSRD-NDA/sht. 6 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support ND MC-ISIN3-1561-01.00 0.203 F01.020.181A.

Class B 1-MCA-ND-H63 C03.020.027 1-MCA-ND-H335 MCSRD-NIO/sht. 1 NDE-35 PT SS 18.000 WELDED ATTACHMENT.

Rigid Restraint ND MC-ISIN3-1561-01.00 0.750 Class B 1-MCA-ND-H335 C03.020.042 1-MCA-NS-H36 MCSRD-NSA/sht. 1 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support NS MC-ISIN3-1563-01.00 0.125 F01.020.261B.

Class B 1-MCA-NS-H36 C03.020.072 1-MCA-VQ-H11 MCSRD-VQA/sht. 2 NDE-35 PT SS 6.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support VQ MC-ISIN3-1585-01.00 0.125 F01.020.652A.

Class B 1-MCA-VQ-H11 Total C03.020 Items: 5 Total C03 Items: 6

EOC 17 (

DUKE ENERGY CORPORATION

(

CATEGORY C-G, Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Pumps And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 30 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG INUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Valve Body Welds ****

C06.020.002A1CF0126B-1 MCM 1205.00-989/1 NDE-25 MT CS 6.000 ITEM # 6J-26. INSPECT ONE VALVE IN THIS CF MC-ISIN3-1591-01.01 1.165 GROUP (2A-2D) PER INTERVAL.

Class B Valve Body to Valve Body Total C06.020 Items: 1 Total C06 Items: 1

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY D-A Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping. Pumps. And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 31 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW( 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.010.010 1LDHX-SUPPORT MCM 1201.06-0021 QAL-13 VT-1 NA 0.000 VERTICAL LETDOWN HEAT EXCHANGER NV MC-ISIN3-1573-02.00 0.375 WELDED ATTACHMENT.

Class C MC-1220-39 Total D01.010 Items: 1

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY D-A, Welded Attachiments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And V;alves Inservice Inspection Database Management System Plan Report McGuire 1 Page 32 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.020.061 1-MCA-KC-2134 MCSRD-KC-304/sht.1 QAL-13 VT-1 NA 20.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint KC MC-ISIN3-1573-01.01 0.125 F01.030.0125B.

Class C 1-MCA-KC-2134 Total D01.020 Items: 1 Total D01 Items: 2

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report C1ass 1 Piping Supports McGuire 1 Page 33 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.010.008A 1-MCR-NC-555 MCSRD-NC-03/sht. 1 QAL-14 VT-3 NA 4.000 Rigid Support NC 0.000 Class A F01.010.053C 1-MCR-ND-507 MCSRD-ND-01/sht. 1 QAL-14 VT-3 NA 14.000 Mech Snubber ND 0.000 Class A F01.010.103B 1-MCR-NI-527 MCSRD-NI-01/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Restraint NI 0.000 Class A F01.010.107A 1-MCR-NI-547 MCSRD-NI-03/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support NI 0.000 Class A F01.010.151B 1-MCR-NV-814 MCSRD-NV-08/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NV 0.000 Class A F01.010.152B 1-MCR-NV-848 MCSRD-NV-06/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NV 0.000 Class A Total F01.010 Items: 6

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping Supports hMcGuire 1 Page 34 N Inservice Inspecti on Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ****

F01.020.001C 1-MCA-CA-H365 MCSRD-CAM/sht. 2 QAL-14 VT-3 NA 6.000 Hyd Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.007C 1-MCA-CA-H411 MCSRD-CAN/sht. 1 QAL-14 VT-3 NA 6.000 Hyd Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.017A 1-MCA-CA-H314 MCSRD-CAM/sht. 1 QAL-14 VT-3 NA 4.000 Rigid Support CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.051 C 1-MCA-CF-H 152 MCSRD-CFC/sht. 1 QAL-14 VT-3 NA 18.000 Hyd Snubber CF MC-ISIN3-1591-01.01 0.000 Class B F01.020.101C 1-MCA-FW-H1 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 14.000 Spring Hgr FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.151C 1-MCA-ND-H2 MCSRD-NDA/sht. 4 QAL-14 VT-3 NA 8.000 Spring Hgr ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.152B 1-MCA-ND-H7 MCSRD-NDA/sht. 4 QAL-14 VT-3 NA 8.000 Rigid Restraint ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.154A 1-MCA-ND-H21 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support ND MC-ISIN3-1561-01.00 0.000 Class B

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report wass 2 Piping Supports McGuire 1 Page 35 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.181A 1-MCA-ND-H63 MCSRD-NDA/sht. 6 QAL-14 VT-3 NA 8.000 Rigid Support ND MC-ISIN3-1561-01.00 0.203 Class B F01.020.182A 1-MCA-ND-H49 MCSRD-NDA/sht. 7 QAL-14 VT-3 NA 8.000 Rigid Support ND MC-ISIN3-1561-01.00 0.125 Class B F01.020.183B 1-MCA-ND-H259 MCSRD-FWA/sht. 7 QAL-14 VT-3 NA 14.000 Rigid Restraint ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.213A 1-MCR-NI-827 MCSRD-NI-08/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.222C 1-MCR-NI-717 MCSRD-NI-11/sht. 1 QAL-14 VT-3 NA 2.000 Hyd Snubber NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.225B 1-MCR-NI-774 MCSRD-NI-09/sht. 3 QAL-14 VT-3 NA 4.000 Rigid Restraint NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.226B 1-MCR-NI-775 MCSRD-NI-09/sht. 3 QAL-14 VT-3 NA 4.000 Rigid Restraint NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.260A 1-MCA-NS-H30 MCSRD-NSC/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.261B 1-MCA-NS-H36 MCSRD-NSA/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.125 Class B

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping Supports McGuire 1 Page 36 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.262C 1-MCA-NS-H39 MCSRD-NSA/sht. 1 QAL-14 VT-3 NA 8.000 Spring Hgr NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.316A 1-MCA-NV-H23 MC-1190-NV-01 -03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.317A 1-MCA-NV-H27 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.318B 1-MCA-NV-H29 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Restraint NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.319A MC-1683-NV.04-R27 MC-1683-NV.04 QAL-14 VT-3 NA 2.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.320C MC-1 683-NV.04-R28 MC-1683-NV.04 QAL-14 VT-3 NA 2.000 Hyd Snubber NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.554A 1-MCA-SM-H70 MCSRD-SMA/sht. 4 QAL-14 VT-3 NA 36.000 Rigid Support SM MC-ISIN3-1593-01.03 0.000 Class B F01.020.555C 1-MCA-SM-H73 MCSRD-SMA/sht. 4 QAL-14 VT-3 NA 42.000 Hyd Snubber SM MC-ISIN3-1593-01.03 0.000 Class B F01.020.601C 1-MCA-SV-H13 MCSRD-SVA/sht. 1 QAL-14 VT-3 NA 6.000 Spring Hgr SV MC-ISIN3-1593-01.00 0.000 Class B

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report EClass 2 Piping Supports McGuire 1 Page 37 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.652A 1-MCA-VQ-H1 1 MCSRD-VQA/sht. 2 QAL-14 VT-3 NA 6.000 Rigid Support VQ MC-ISIN3-1585-01.00 0.125 Class B Total F01.020 Items: 27

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 3 Piping Supports McGuire 1 Page 38 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.112A 1-MCA-KC-1089 MCSRD-KC-303/sht.2 QAL-14 VT-3 NA 6.000 Rigid Support KC MC-ISIN3-1573-01.01 0.000 Class C F01.030.114A -MCA-KC-1006 MCSRD-KC-305/sht.2 QAL-14 VT-3 NA 16.000 Rigid Support KC MC-ISIN3-1573-01-00 0.000 Class C F01.030.115A 1-MCA-KC-2297 MCSRD-KC-305/sht.3 QAL-14 VT-3 NA 8.000 Rigid Support KC MC-ISIN3-1573-02-00 0.000 Class C F01.030.116A 1-MCA-KC-H100 MCSRD-KC-305/sht.3 QAL-14 VT-3 NA 8.000 Rigid Support KC MC-ISIN3-1573-02-00 0.000 Class C F01.030.125B 1-MCA-KC-2134 MCSRD-KC-304/sht.1 QAL-14 VT-3 NA 20.000 INSPECT WITH D01.020.061.

Rigid Restraint KC MC-ISIN3-1573-01.01 0.125 Class C F01.030.128B 1-MCA-KC-1034 MCSRD-KC-311/sht.2 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN3-1573-02.02 0.000 Class C F01.030.129B 1-MCA-KC-1 027 MCSRD-KC-311/sht.3 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN3-1573-02.02 0.000 Class C F01.030.152C 1-MCA-KD-083 MCSRD-KD-10/sht.2 QAL-14 VT-3 NA 6.000 Hyd Snubber KD MC-ISIN3-1609-01.01 0.000 Class C

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report mcass 3 Piping Supports McGuire 1 Page 39 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.153C 1-MCA-KD-165 MCSRD-KD-12/sht.1 QAL-14 VT-3 NA 6.000 Spring Hgr KD MC-ISIN3-1609-01.01 0.000 Class C F01.030.271A 1-MCA-WN-H29 MCSRD-WNB/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support WN MC-ISIN3-1609-07.00 0.000 Class C F01.030.272B 1-MCA-WN-H64 MCSRD-WNB/sht.3 QAL-14 VT-3 NA 6.000 Rigid Restraint WN MC-ISIN3-1609-07.00 0.000 Class C Total F01.030 Items: 11

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• SUPPorts Other Than Piping Supports McGuire 1 Page 40 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.001B 1PZR-SKIRT MCM 1201.01-0048 QAL-14 VT-3 NA 0.000 PRESSURIZER SUPPORT SKIRT.

NC MC-ISIN3-1553-02.00 0.000 Class A F01.040.002B 1PZR-LUGS MCM 1201.01-0170 QAL-14 VT-3 NA 0.000 PRESSURIZER SUPPORT LUGS.

NC MC-ISIN3-1553-02.00 0.000 Class A F01.040.003B 1PZR-SUPPORT MC-1070-4 QAL-14 VT-3 NA 0.000 PRESSURIZER LOWER AND UPPER SUPPORT NC MC-ISIN3-2553-02.00 0.000 FRAME. REFERENCE DRAWING MC-1070-6.

Class A MC-1070-22 F01.040.006B 1RCP-B-SUPPORT MC-1070-4 QAL-14 VT-3 NA 0.000 REACTOR COOLANT PUMP 1B SUPPORT NC MC-ISIN3-1553-01.00 0.000 (3 ASSEMBLIES).

Class A MC-1070-17 F01.040.01OB 1RCHPSS-SUPPORT MCM 1201.04-0272 QAL-14 VT-3 NA 0.000 RECIPROCATING CHARGING PUMP SUCTION NV MC-ISIN3-1554-03.00 0.375 STABILIZER Class B SUPPORT.

Total F01.040 Items: 5 Total F01 Items: 49

EOC 17 DUKE ENERGY CORPORATION

(

CATEGORY AUG, Augmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report TMuqmented Examination McGuire 1 Page 41 12/03/2003 Inservice Inspection Plan for Interval 3 Outage 3 ITEM NUMBER ID NUMBER SYS ISO/DWI 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Reactor Coolant Pump Flywheel ****

G01.001.001 1RCP-1A MCM 1201.01-7 NDE-949 UT CS 0.000 50237 REACTOR COOLANT PUMP 1A FLYWHEEL.

NC MC-ISIN3-1553-01.00 0.000 AUGMENTED EXAMINATION.

Class A MCM 1201.01-0080 INSPECT ONCE PER INTERVAL IN ACCORDANCE WITH TECHNICAL SPECIFICATION 5.5.7.

G01.001.002 1RCP-1B MCM 1201.01-7 NDE-949 UT CS 0.000 50237 REACTOR COOLANT PUMP B FLYWHEEL.

NC MC-ISIN3-1553-01.00 0.000 AUGMENTED EXAMINATION.

Class A MCM 1201.01-0080 INSPECT ONCE PER INTERVAL IN ACCORDANCE WITH TECHNICAL SPECIFICATION 5.5.7.

GO1.001.003 1RCP-1C MCM 1201.01-7 NDE-949 UT CS 0.000 50237 REACTOR COOLANT PUMP 1C FLYWHEEL.

NC MC-ISIN3-1553-01.00 0.000 AUGMENTED EXAMINATION.

Class A MCM 1201.01-0080 INSPECT ONCE PER INTERVAL IN ACCORDANCE WITH TECHNICAL SPECIFICATION 5.5.7.

GO1.001.004 1RCP-1D MCM 1201.01-7 NDE-949 UT CS 0.000 50237 REACTOR COOLANT PUMP D FLYWHEEL.

NC MC-ISIN3-1553-01.00 0.000 AUGMENTED EXAMINATION. INSPECT ONCE Class A MCM 1201.01-0080 PER INTERVAL IN ACCORDANCE WITH TECHNICAL SPECIFICATION 5.5.7.

Total GO1.001 Items: 4 Total G01 Items: 4

EOC 17 ( (

DUKE ENERGY CORPORATION CATEGORY AUG, Augmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Iumented Examination McGuire 1 Page 42 Inservice Inspection Plan for Interval 3 Outage 3 1203/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Pipe Rupture Protection G03.001.004 1NC1F-109 MCFI-1NC-47 NDE-600 UT SS 10.000 ^ AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.004A1NC1F-109 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

G03.001.005 1NC-102-1 MCFI-1NC-47 NDE-600 UT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.005A1NC-102-1 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

G03.001.006 1NC-102-2 MCFI-1NC-47 NDE-600 UT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.006A 1NC-1 02-2 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

nAq AA1 nn7 1NA>.-191 Mc'I-1Nlr'A7 NnF I IT RR oo 1 A flfl

• Al il IRMT:n I=AAII\IATIr^Nl Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

EOC 17 (

DUKE ENERGY CORPORATION

(

CATEGORY AUG, Augmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report umented Examination McGuire 1 Page 43

• Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS G03.001.007A1NC-128-1 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

G03.001.008 1NC-128-2 MCFI-1NC-47 NDE-600 UT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.008A1 NC-128-2 MCFI-1 NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257)

Total G03.001 Items: 10 Total G03 Items: 10

EOC 17 (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MCIass 1 and 2 Piping Welds McGuire 1 Page 44 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Elements Subject to Thermal Fatigue ****

R01.011.005 1SGA-OUTLET-W6SE MC1676-4 PDI-UT-10 UT SS-CS 31.000 5149697 STEAM GENERATOR 1AOUTLET NOZZLE.

Circumferential NC MCM 1201.01-0782 2.500 5158172 DRAWING # MC-ISIN-1553-01.00. SEGMENT Class A Term end MCM 1201.01-0769 Nozzle to NC-005. NDE-12/RT MAY BE SUBSTITUTED IN Dissimilar Safe End LIEU OF PDI-UT-10/UT.

R01.011.023 1PZR-W2SE MCM 1201.01-170 PDI-UT-10 UT SS-CS 4.000 50467 PRESSURIZER SPRAY NOZZLE. SEGMENT Circumferential NC MCM 1201.01-171 0.970 50211 NC-043.

Class A Term end MC-ISIN3-1553-02.00 Nozzle to Dissimilar Safe End R01.011.081 1NI32A-2 MCFI-1 N121 NDE-600 UT SS 18.000

• SEGMENT NI-060.

Circumferential NI MC-ISIN3-1562-03.01 PDI-UT-2 0.250 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Elbow R01.011.082 1N193-4 MCFI-1NI97 NDE-600 UT SS 3.000

• SEGMENTNI-061A.

Circumferential NI MC-ISIN3-1562-01.00 PDI-UT-2 160 0.438 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Reducer R01.011.083 1N1267-2 MCFI-1 N175 NDE-600 UT SS 3.000

• SEGMENT NI-062A.

Circumferential NI MC-ISIN3-1562-01.00 PDI-UT-2 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Pipe R01.011.084 1N1227-6 MCFI-1Nl74 NDE-600 UT SS 3.000 SEGMENT NI-063A.

Circumferential NI MC-ISIN3-1562-01.00 PDI-UT-2 0.438 *SEESECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Tee R01.011.131 1NVP624-5 MCFI-1NV13 NDE-12 RT SS 8.000 SEGMENT NV-001.

Circumferential NV MC-ISIN3-1554-03.01 0.148 Class B Elbow to Pipe R01.011.132 1NV1F2886 MCFI-1NV13 NDE-12 RT SS 8.000 SEGMENT NV-002AA.

Circumferential NV MC-ISIN3-1554-03.01 0.148 Class B Pipe to Elbow

EOC 17 (

DUKE ENERGY CORPORATION

(

CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report

.Class 1 and 2 Piping Welds McGuire 1 Page 45 Inservice Inspection Plan for Interval 3 Outage 3 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS R01.011.133 1NV40-1 MCFI-1NV9 NDE-12 RT SS 8.000 SEGMENT NV-002AA.

Circumferential NV MC-ISIN3-1554-03.01 0.148 Class B Reducer to Tee R01.011.140 1NV15-2 MCFI-1NV8 NDE-600 UT SS 4.000

• SEGMENTNV-011A.

Circumferential NV MC-ISIN3-1554-03.01 PDI-UT-2 0.531 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Tee to REQUIREMENTS.

Pipe R01.011.204 1RV1F107 MCFI-1RV31 NDE-600 UT CS 12.000

• SEGMENT RV-013.

Circumferential RV MC-ISIN3-1604.03-00 PDI-UT-2 0.375 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe Total R01.011 Items: 11

• • • • Elements Subject to Corrosive, Erosive, or Cavitation Wastage ****

R01.013.002 1RV1F104A MCFI-1RV31 NDE-946 UT CS 12.000 STEP SEGMENT RV-002.

Circumferential RV MC-ISIN3-1604-03.00 0.375 WEDGE EXAMINE A 1 FT. LENGTH OF PIPE AT WELD TO Class B Pipe to DETERMINE WALL THICKNESS.

Valve Total R01.013 Items: 1 Total R01 Items: 12

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 4 Refueling Outage EOC 18 ISI Inspection Listing Revision 0

EOC 18 DUKE ENERGY CORPORATION

(

CATEGORY B-A. Pressure Retainina Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report MTead Welds McGuire 1 Page 1 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Circumferential **

B01.021.001 1RPV6-446B MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD RING PC. 446-03 TO CLOSURE Circumferential MCM 1201.01-225 7.300 HEAD CAP PC. 446-04.

Class A Head Ring to Head Cap Total B01.021 Items: 1

• • • • Meridional ****

B01.022.004 1RPV 1-446D MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 PDI-UT-6 7.300 MERIDIONAL WELD AT APPROXIMATELY 252 Class A Head to DEGREES.

Head B01.022.005 RPV 1-446E MCM 1201.01-204 NDE-620 UT CS 0.000 50376 CLOSURE HEAD Longitudinal MCM 1201.01-225 PDI-UT-6 7.300 MERIDIONAL WELD AT APPROXIMATELY 324 Class A Head to DEGREES.

Head Total B01.022 Items: 2 Total B01 Items: 3

EOC 18 DUKE ENERGY CORPORATION

¢ CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle-to-Vessel Welds ****

B03.110.001 1PZR-10 MCM 1201.01-170 NDE-3620 UT CS 24.500 50337 PRESSURIZER SURGE NOZZLE TO LOWER Circumferential NC MCM 1201.01-171 2.550 HEAD.

Class A Nozzle to Head Total B03.110 Items: 1

EOC 18 (

DUKE ENERGY CORPORATION

(

CATEGORY B-D. Full Penetratih on Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report EPressurizer McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section ****

B03.120.001 1PZR-10R MCM 1201.01-170 NDE-680 UT CS 24.500 TBD PRESSURIZER SURGE NOZZLE TO LOWER Circumferential NC MCM 1201.01-171 2.550 HEAD. (INSIDE RADIUS SECTION)

Class A Nozzle to Head Total B03.120 Items: 1 Total B03 Items: 2

EOC 18 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Steam Generators McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.100.001 1SGA-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.002 1SGA-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.003 1SGB-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1B PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.004 1SGB-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1B PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.005 1SGC-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1C PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.006 1SGC-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-I CS 0.000 STEAM GENERATOR C PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.007 SGD-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1D PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.008 1SGD-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1D PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

Total B06.100 Items: 8

EOC 18 (

DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.190.001 1RCP-1 A-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1A MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.002 1RCP-1B-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1B MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.003 1RCP-1C-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1C MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.004 1RCP-1D-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1D MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A Total B06.190 Items: 4 Total B06 Items: 12

EOC 18 DUKE ENERGY CORPORATION

(

CATEGORY B-G-2, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO)(DWG NUMBERS PROC INSP REQ MAT/SCH DIAJTHK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.050.003 1NC5-FL3 MCFI-1NC5 QAL-13 VT-1 SS 1.375 FLANGE BOLTING (12 STUDS). BOLT SIZE NC MC-ISIN3-1553-02.00 10.000 DETERMINED USING CHART IN M/P/0/A/7650/01 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

B07.050.200 1NV25-FL2 MCFI-1NV25 QAL-13 VT-1 SS 1.000 FLANGE BOLTING (4 STUDS). BOLT SIZE NV MC-ISIN3-1554-01.00 0.000 DETERMINED USING CHART IN M/P/0/A/7650/01 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

Total B07.050 Items: 2

EOC 18 DUKE ENERGY CORPORATION

(

CATEGORY B-G-2, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting. 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report CRD Housings McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,IDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.080.001 1CRD-HOUSING MCM 1201.01-224 QAL-13 VT-1 SS 0.000 APPLIES TO 53 CRD HOUSINGS. EXAMINE ONLY NC MC-ISIN3-1553-01.00 6.000 CRD BOLTING THAT IS REUSED WHEN Class A MCM 1201.13-35 HOUSING IS REASSEMBLED.

Total B07.080 Items: 1 Total B07 Items: 3

EOC 18 (

DUKE ENERGY CORPORATION CATEGORY B-L-2. Pump Casings INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 8 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Pump Casing ****

B12.020.001 1RCP-1A MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1A CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.002 1RCP-1B MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1B CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.003 1RCP-1C MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP C CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.004 1RCP-1D MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1D CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

Total B12.020 Items: 4

EOC 18 (

DUKE ENERGY CORPORATION

(

CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Valve Body, Exceeding NPS 4

• B12.050.001A NC-1 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM# 1NC-0001).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001B 1NC-2 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0002).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 I NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001C 1NC-3 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0003).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIROR VOLUMETRIC EXAMINATION.

B12.050.002A 1ND-1B MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.002B 1ND-2A MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 ND-1 B OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003A 1N1-54A MCM-1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-005). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1N-54A, 1NI-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003B 1NI-65B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1NI-54A, 1NI-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE,

EOC 18 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.OO3C1N1-76A MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10' CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: I NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.OO3D1NI-88B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1N-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B1 2.050.004A 1N1-59 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1NI-59, 1NI-60, 1NI-70, 1N-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004B 1Ni-60 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1NI-59, 1N-60, 1N-70, 1N-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004C 1Nl-70 MC 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004D 1NI-71 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N162 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1Nl-93, OR 1NI-94 ONLY IF

EOC 18 ( (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004E 1NI-81 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: 1NI-59, 1NI-60, 1NI-70,1 NI-71,1 NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004F 1NI-82 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISiN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1N-59,1 NI-60, 1NI-70, 1NI-71,1 NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004G1NI-93 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1NI-59, 1N-60, 1N-70, 1N-71, 1NI-81, 1N-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004H 1NI-94 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N186 VALVES: 1 NI-59, 1NI-60, 1NI-70, 1NI-71,1 NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.005A 1NI-125 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-01 0).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 Nl53 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 18 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Valves McGuire 1 Page 12

• Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.005B 1NI-129 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 N153 1NI-125, OR iNI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006A1NI-126 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1Nl-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006B 1NI-134 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006C 1NI-157 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006D 1NI-1 75 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 18 ( l DUKE ENERGY CORPORATION CATEGORY B-M-2. Valve BodV INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.006E 1NI-180 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, INI-175, I1N1-1 80, 1NI-1 81 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006F 1NI-181 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007A 1NI-160 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N135 VALVES: 1N1-1 60, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007B 1NI-176 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 5J-001). INSPECT ONE OFTHE FOLLOWING Class A MCFI-1NN78 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

Total B12.050 Items: 27 Total B12 Items: 31

EOC 18 (

DUKE ENERGY CORPORATION CATEGORY B-N-1, Interior Of Reactor Vessel INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

.Reactor Vessel McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Vessel Interior ****

B13.010.001 1RPV-INTERIOR MCM 1201.01-146 QAL-14 VT-3 SS 0.000 REACTOR VESSEL INTERIOR. AREAS TO BE NC MC-ISIN3-1553-01.00 0.000 EXAMINED SHALL INCLUDE THE SPACES Class A MCM 1201.01-223 ABOVE AND BELOW THE REACTOR CORE THAT ARE MADE ACCESSIBLE FOR EXAMINATION BY REMOVAL OF COMPONENTS DURING NORMAL REFUELING OUTAGES.

INSPECT ONCE EACH INSPECTION PERIOD.

Total B13.010 Items: 1 Total B13 Items: 1

EOC 18 ( (

DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC'NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.010.006 1SWIF-SUPPORT-1A MCM 1201.04-0027 NDE-35 PT SS 0.000 SEAL WATER INJECTION FILTER 1A SUPPORT.

NV MC-ISIN3-1554-03.00 0.375 WELDED ATTACHMENTS.

Class B Total C03.010 Items: 1

EOC 18 ( a DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 16 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWI I NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.020.053 1-MCA-NV-H15 MCSRD-NVD/sht. 3 NDE-35 PT SS 6.000 WELDED ATTACHMENT.

Rigid Support NV MC-ISIN3-1 554-03.01 0.125 Class B 1-MCA-NV-H1 5 Total C03.020 Items: 1 Total C03 Items: 2

EOC 18 (

DUKE ENERGY CORPORATION CATEGORY D-A. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 17 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW G NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.020.001 1-MCA-CA-H84 MCSRD-CAJ/sht.1 QAL-13 VT-1 NA 8.000 WELDED ATTACHMENT. INSPECT WITH Spring Hgr CA MC-ISIN3-1592-01.01 0.125 F01.030.004C.

Class C 1-MCA-CA-H84 Total D01.020 Items: 1 Total D01 Items: 1

EOC 18 ( (j DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report IClass Pipin Supports McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 4 12/0312003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.010.005C 1-MCR-NC-553 MCSRD-NC-03/sht. 1 QAL-14 VT-3 NA 4.000 Mech Snubber NC 0.000 Class A F01.010.017C 1-MCR-NC-579 MCSRD-WL-02/sht. 5 QAL-14 VT-3 NA 2.000 Mech Snubber NC 0.000 Class A F01.010.108C 1-MCR-NI-548 MCSRD-NI-03/sht. 2 QAL-14 VT-3 NA 10.000 Hyd Snubber NI 0.000 Class A F01.010.109A 1-MCR-NI-565 MCSRD-NI-03/sht. 4 QAL-14 VT-3 NA 6.000 Rigid Support NI 0.000 Class A F01.010.11OA 1-MCR-NI-567 MCSRD-NI-03/sht. 5 QAL-14 VT-3 NA 10.000 Rigid Support Ni 0.000 Class A F01.010.159A 1-MCR-NV-1061 MCSRD-NV-04/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NV 0.000 Class A F01.010.160C 1-MCR-NV-1063 MCSRD-NV-04/sht. 1 QAL-14 VT-3 NA 2.000 Spring Hgr NV 0.000 Class A F01.010.165A 1-MCR-NV-1231 MCSRD-NV-02/sht. 3 QAL-14 VT-3 NA 3.000 Rigid Support NV 0.000 Class A Total F01.010 Items: 8

EOC 18 '\

DUKE ENERGY CORPORATION

(

CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report TMass 2 Pipin SupportsD McGuire 1 Page 19 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01,020.003A 1-MCR-CA-H390 MCSRD-CAM/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.018A 1-MCA-CA-H169 MCSRD-CAM/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Support CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.052C 1-MCA-CF-H153 MCSRD-CFC/sht. 1 QAL-14 VT-3 NA 18.000 Spring Hgr CF MC-ISIN3-1591-01.01 0.000 Class B F01.020.168C 1-MCA-ND-H251 MCSRD-FWA/sht. 4 QAL-14 VT-3 NA 12.000 Mech Snubber ND MC-ISIN3-1561 -01.00 0.000 Class B F01.020.169C 1-MCA-ND-H255 MCSRD-FWA/sht. 4 QAL-14 VT-3 NA 12.000 Hyd Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.170C 1-MCA-ND-H256 MCSRD-FWA/sht. 4 QAL-14 VT-3 NA 12.000 Hyd Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.208C 1-MCR-NI-541 MCSRD-NI-03/sht. 3 QAL-14 VT-3 NA 6.000 Hyd Snubber NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.217A 1-MCR-NI-700 MCSRD-NI-11/sht.2 QAL-14 VT-3 NA 2.000 Rigid Support NI MC-ISIN3-1562-03.01 0.000 Class B

EOC 18 \

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Cass 2 pii Supports McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.218A 1-MCR-NI-701 MCSRD-NI-11/sht.2 QAL-14 VT-3 NA 2.000 Rigid Support NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.223C 1-MCR-NI-719 MCSRD-NI-11/sht.3 QAL-14 VT-3 NA 2.000 Hyd Snubber NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.237A 1-MCR-NI-502 MCSRD-NI-01/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.238A 1-MCR-NI-550 MCSRD-NI-03/sht. 3 QAL-14 VT-3 NA 6.000 Rigid Support NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.239A 1-MCR-NI-767 MCSRD-NI-09/sht. 3 QAL-14 VT-3 NA 4.000 Rigid Support NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.265C 1-MCA-NS-H85 MCSRD-NSB/sht. I QAL-14 VT-3 NA 10.000 Hyd Snubber NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.279B 1-MCA-NS-H43 MCSRD-NSA/sht. 2 QAL-14 VT-3 NA 10.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.282B 1-MCR-NS-551 MCSRD-NS-02/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.283B 1-MCR-NS-552 MCSRD-NS-02/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B

EOC 18 ( (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Pipinq Supports McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.284B 1-MCR-NS-651 MCSRD-NS-04/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.285B 1-MCR-NS-652 MCSRD-NS-04/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.286B 1-MCR-NS-653 MCSRD-NS-04/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B F01.020,321A 1-MCA-NV-H31 MCSRD-NVA/sht. 6 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.00 0.000 Class B F01.020.322A 1-MCA-NV-H32 MCSRD-NVA/sht. 6 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.00 0.000 Class B F01.020.323A 1-MCA-NV-H33 MCSRD-NVA/sht. 6 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.00 0.000 Class B F01.020.324B 1-MCA-NV-H36 MC-1190-NV-01-02 QAL-14 VT-3 NA 3.000 Rigid Restraint NV MC-ISIN3-1554-02.01 0.000 Class B F01.020.603C 1-MCA-SV-H11 MCSRD-SVA/sht. 1 QAL-14 VT-3 NA 6.000 Mech Snubber SV MC-ISIN3-1593-01.00 0.000 Class B F01.020.604B 1-MCA-SV-H12 MCSRD-SVA/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint SV MC-ISIN3-1593-01.00 0.000 Class B

EOC 18 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping upports McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 4 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.653A 1-MCR-VQ-505 MCSRD-VQ-02/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Support VQ MC-ISIN3-1585-01.00 0.000 Class B Total F01.020 Items: 27

EOC 18 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Suports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report mcass 3 Piping Supports McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.002B 1-MCA-CA-H285 MCSRD-CAA/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint CA MC-ISIN3-1592-01.01 0.000 Class C F01.030.003A 1-MCA-CA-H358 MCSRD-CAA/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support CA MC-ISIN3-1592-01.01 0.000 Class C F01.030.004C 1-MCA-CA-H84 MCSRD-CAJ/sht.1 QAL-14 VT-3 NA 8.000 INSPECT WITH D01.020.001.

Spring Hgr CA MC-ISIN3-1592-01.01 0.125 Class C F01.030.130B 1-MCA-KC-1043 MCSRD-KC-313/sht.2 QAL-14 VT-3 NA 8.000 Rigid Restraint KC MC-ISIN3-1573-02.02 0.000 Class C F01.030.131B 1-MCA-KC-1030 MCSRD-KC-313/sht.3 QAL-14 VT-3 NA 8.000 Rigid Restraint KC MC-ISIN3-1573-02.02 0.000 Class C F01.030.174B 1-MCA-RN-1177 MCSRD-RN-304/sht.2 QAL-14 VT-3 NA 10.000 Rigid Restraint RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.175B 1-MCA-RN-1559 MCSRD-RN-305/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint RN MC-ISIN3-1574-01.00 0.000 Class C F01.030.176B 1-MCA-RN-1301 MCSRD-RN-306 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN3-1574-03.00 0.000 Class C

EOC 18 (

DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Cass 3 Pipin Supports McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.177B 1-MCA-RN-1548 MCSRD-RN-305/sht.2 QAL-14 VT-3 NA 6.000 Rigid Restraint RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.273B 1-MCA-WN-H66 MCSRD-WNB/sht.3 QAL-14 VT-3 NA 6.000 Rigid Restraint WN MC-ISIN3-1609-07.00 0.000 Class C F01.030.274C 1-MCA-WN-H25 MCSRD-WNC/sht.1 QAL-14 VT-3 NA 8.000 Spring Hgr WN MC-ISIN3-1609-07.00 0.000 Class C F01.030.281A 1-MCA-YC-03 MCSRD-YC-301/sht.2 QAL-14 VT-3 NA 5.000 Rigid Support YC MC-ISIN3-1618-01.00 0.000 Class C F01.030.282A 1-MCA-YC-028 MCSRD-YC-302/sht.1 QAL-14 VT-3 NA 5.000 Rigid Support YC MC-ISIN3-1618-01.00 0.000 Class C F01.030.283A 1-MCA-YC-040 MCSRD-YC-302/sht.2 QAL-14 VT-3 NA 8.000 Rigid Support YC MC-ISIN3-1618-01.00 0.000 Class C Total F01.030 Items: 14

EOC 18 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System ISuDports Other Than Piping Suopl Drts McGuire 1 Inservice Inspection Plan for Interval 3 Outage 4 Plan Report Page 25 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.004B 1SGA-COLUMNS MC-1070-4 QAL-14 VT-3 NA 0.000 STEAM GENERATOR 1A SUPPORT COLUMNS NC MC-ISIN3-1553-01.00 0.000 (4 ASSEMBLIES). REFERENCE DRAWING MCM Class A MC-1070-17 1201.01-0782.

F01.040.012B 1NDP-SUPPORT-1A MCM 1201.05-0048 QAL-14 VT-3 NA 0.000 RESIDUAL HEAT REMOVAL PUMP 1A SUPPORT.

ND MC-ISIN3-1561-01.00 0.000 Class B F01.040.013B NIP-SUPPORT-1A MCM 1201.05-0454 QAL-14 VT-3 NA 0.000 SAFETY INJECTION PUMP 1A SUPPORT.

NI MC-ISIN3-1562-03.00 0.000 Class B Total F01.040 Items: 3 Total F01 Items: 52

EOC 18 (

DUKE ENERGY CORPORATION

(

CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System IClass 1 and 2 Piping Welds McGuire 1 Inservice Inspection Plan for Interval 3 Outage 4 Plan Report Page 26 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Elements Subject to Thermal Fatigue ****

R01.011.025 1PZR-W1SE MCFI-1NC53 PDI-UT-10 UT SS-CS 14.000 50339 PRESSURIZERSURGENOZZLE. DRAWING#

Circumferential NC MCM 1201.01-171 1.640 50468 MC-ISIN-1553-01.00. SEGMENT NC-073.

Class A Term end MCM 1201.01-170 Nozzle to Dissimilar Safe End R01.011.085 1N1231 -1 MCFI-1Nl74 NDE-995 UT SS 1.500 TBD SEGMENT NI-063B.

Circumferential NI MC-ISIN3-1562-01.00 0.281 Class B Full Coupling to Pipe R01.011.086 1NI270B-13 MCFI-1NI75 NDE-995 UT SS 1.500 TBD SEGMENT NI-063B.

Circumferential NI MC-ISIN3-1562-01.00 0.281 Class B Pipe to Reducer R01.011.101 1NS148-4 MCFI-1NS47 NDE-12 RT SS 8.000 SEGMENTNS-017.

Circumferential NS MC-ISIN3-1563-01.00 0.148 Class B Elbow to Pipe R01.011.102 1NS123-4 MCFI-1NS48 NDE-12 RT SS 8.000 SEGMENT NS-018.

Circumferential NS MC-ISIN3-1563-01.00 0.148 Class B Elbow to Pipe R01.011.134 1NV39-1 MCFI-1NV8 NDE-12 RT SS 6.000 SEGMENT NV-002AB.

Circumferential NV MC-ISIN3-1554-03.01 0.134 Class B Elbow to Elbow R01.011.135 1NV37-3 MCFI-1NV8 NDE-12 RT SS 6.000 SEGMENT NV-002AB.

Circumferential NV MC-ISIN3-1554-03.01 0.134 Class B Elbow to Pipe DnG n1 d 1 On KA&CI 1 s1X/1 1 h1\/1:A11 0O 00 1 Q hIAC ann I IT QQ A nn *XQIVIACNII I1V/ nnO tLU .UI 1.1 JO Circ urVVmfe-ti IVIN C -1N 1 5 0 0 IN iU-OUU ul b +.uuV 3OMclIMN I IN4V-UU40.

Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.237 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Tee to REQUIREMENTS.

Pipe

EOC 18 (  !

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report

• Class 1 and 2 Piping Welds McGuire 1 Page 27 Inservice Inspection Plan for Interval 3 Outage 4 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS R01.011.141 1NV1F12A-12 MCFI-1NV10 NDE-600 UT SS 3.000 SEGMENTNV-019AA.

Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Tee to REQUIREMENTS.

Pipe R01.011.164 1NV1FW53-63 MCFI-1 NV53 NDE-600 UT SS 2.000 SEGMENT NV-084A.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.344 ADDITONAL EXAM ABOVE MINIMUM Class B Pipe to REQUIRMENTS PER EXPERT PANEL.

Pipe *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

R01.011.165 1NV365-6 MCFI-1NV147 NDE-12 RT SS 3.000 SEGMENTNV-084B.

Circumferential NV MC-ISIN3-1554-01.02 0.216 THIS EXAM IS ADDED ABOVE Rl-ISI MINIMUM Class B Pipe to REQUIREMENTS PER EXPERT PANEL.

Elbow R01.011.168 1RCPA-TE MCFI-1NV11 NDE-600 UT SS 3.000 RECIPROCATING CHARGING PUMP Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.438 ACCUMULATOR. SEGMENT NV-109.

Class B Term end MCM 1201.01-0197 Tee to *SEE SECTION 8 FOR CALIBRATION BLOCK Flange REQUIREMENTS.

R01.011.169 1NV1F479 MCFI-1NV11 NDE-600 UT 3.000

• SEGMENTNV-11OA.

Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.438 SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Pipe R01.011.225 1WL1F3059 MCFI-1WL84 NDE-12 RT SS 6.000 SEGMENTWL-010A.

Circumferential WL MC-ISIN3-1565-07.00 0.134 Class B Elbow to Pipe Total R01.011 Items: 14 Total R01 Items: 14

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 5 Refueling Outage EOC 19 ISI Inspection Listing Revision 0

EOC 19 (

DUKE ENERGY CORPORATION

(

CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 1 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC I'NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle-to-Vessel Welds ****

B03.110.003 1PZR-13 MCM 1201.01-170 NDE-3620 UT CS 15.000 50338 PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. W-Z QUADRANT.

Class A Nozzle to Head B03.110.004 1PZR-14 MCM 1201.01-170 NDE-3620 UT CS 15.000 50338 PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. W-X QUADRANT.

Class A Nozzle to Head Total B03.110 Items: 2

EOC 19 (

DUKE ENERGY CORPORATION

(

CATEGORY B-D. Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWCiNUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section ****

B03.120.003 1PZR-13R MCM 1201.01-170 NDE-680 UT CS 15.000 TBD PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. W-Z QUADRANT. (INSIDE RADIUS Class A Nozzle to SECTION)

Head B03.120.004 1PZR-14R MCM 1201.01-170 NDE-680 UT CS 15.000 TBD PRESSURIZER SAFETY NOZZLE TO UPPER Circumferential NC MCM 1201.01-171 1.900 HEAD. W-X QUADRANT. (INSIDE RADIUS Class A Nozzle to SECTION)

Head Total B03.120 Items: 2

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report

• Steam Generators (Primary Side) McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG iNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section B03.140.003 1SGB-INLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR B Circumferential NC MCM 1201.01-0769 6.500 INLET NOZZLE TO LOWER HEAD. Y1-X2 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

B03.140.004 1SGB-OUTLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR 1B Circumferential NC MCM 1201.01-0769 6.500 OUTLET NOZZLE TO LOWER HEAD. Y2-X2 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

B03.140.005 1SGC-INLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR 1C Circumferential NC MCM 1201.01-0769 6.500 INLET NOZZLE TO LOWER HEAD. Y1-X1 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

B03.140.006 1SGC-OUTLET MCM 1201.01-0782 TBD VT-1 CS 0.000 TBD STEAM GENERATOR 1C Circumferential NC MCM 1201.01-0769 6.500 OUTLET NOZZLE TO LOWER HEAD. Y2-X1 Class A Nozzle to QUADRANT. (INSIDE RADIUS SECTION)

Head ENHANCED VISUAL EXAM WILL BE PERFORMED IN LIEU OF ULTRASONIC EXAM.

Total B03.140 Items: 4 Total B03 Items: 8

EOC 19 (

DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting! Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Steam Generators McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.100.001 1SGA-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06,100.002 1SGA-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.003 1SGB-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR B PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.004 1SGB-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR B PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.005 1SGC-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1C PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.006 1SGC-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1C PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.007 1SGD-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1D PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.008 1SGD-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-I CS 0.000 STEAM GENERATOR 1D PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

Total B06.100 Items: 8

EOC 19 (

DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,,'DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.190.001 1RCP-1A-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP A MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.002 1RCP-1B-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP B MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.003 1RCP-1C-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP C MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.004 1RCP-1D-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP D MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A Total B06.190 Items: 4 Total B06 Items: 12

EOC 19 DUKE ENERGY CORPORATION CATEGORY B-G-2. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO) DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.050.201 1NV125-FL1 MCFI-1NV125 QAL-13 VT-1 SS 1.000 FLANGE BOLTING (4 STUDS). BOLT SIZE NV MC-ISIN3-1554-01.01 0.000 DETERMINED USING CHART IN M/PIO/A/7650/01 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

Total B07.050 Items: 1

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY B-G-2, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report MCRD HousinMs McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 5 12103/2003 ITEM NUMBER ID NUMBER SYS ISO,tDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.080.001 1CRD-HOUSING MCM 1201.01-224 QAL-13 VT-1 SS 0.000 APPLIES TO 53 CRD HOUSINGS. EXAMINE ONLY NC MC-ISIN3-1553-01.00 6.000 CRD BOLTING THAT IS REUSED WHEN Class A MCM 1201.13-35 HOUSING IS REASSEMBLED.

Total B07.080 Items: 1 Total B07 Items: 2

EOC 19 1 DUKE ENERGY CORPORATION

(

CATEGORY B-L-2, Pump Casings INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

.PumBs McGuire 1 Page 8 12/03/2003 Inservice Inspection Plan for Interval 3 Outage 5 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Pump Casing ****

B12.020.001 1RCP-1A MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1A CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.002 1RCP-1B MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1B CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.003 1RCP-1C MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP C CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.004 1RCP-1D MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP D CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

Total B12.020 Items: 4

EOC 19 DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Valve Body, Exceeding NPS 4

• B12.050.001A NC-1 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0001).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1,1 NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001 B 1NC-2 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0002).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001C1NC-3 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0003).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.002A 1ND-1B MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.002B 1ND-2A MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM #4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 I ND-1 B OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003A 1NI-54A MCM-1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-005). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1NI-54A, 1N-65B,1 N-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003B 1NI-65B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1 NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE,

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY B-M-2. Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003C1NI-76A MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1N-54A, 1N-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003D1NI-88B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1N-54A, 1N-65B, 1NI-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004A 1NI-59 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1N-59, 1N-60, 1N-70, 1N-71,1 Nl-81, 1Nl-82, 1Nl-93, OR 1Nl-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004B 1NI-60 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1NI-59,1 NI-60, 1N-70, 1N-71,1 N-81, 1NI-82, 1N-93, OR 1N-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B1 2.050.004C 1NI-70 MC 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1N-59,1 NI-60, 1N-70, 1N-71, 1N-81, 1N-82, 1N-93, OR 1N-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004D 1NI-71 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N162 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF

/

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004E 1N1-81 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71,1 NI-81, 1N-82, 1N-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004F 1NI-82 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1N-59, 1N-60, 1NI-70,1 NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004G1NI-93 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1N-59, 1N-60, 1N-70, 1N-71,1 NI-81, 1NI-82, 1Ni-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004H1NI-94 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1NI-59, 1N-60, 1NI-70, 1NI-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.005A 1NI-125 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 Nl53 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.005B 1NI-129 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-01 0).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1NI53 INI-125, OR NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006A1NI-126 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006B 1NI-134 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006C1 NI-157 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006D 1NI-175 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 19

{

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Valves McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.006E 1NI-180 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1N-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006F 1NI-181 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007A 1NI-160 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N135 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007B 1NI-176 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI78 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

Total B12.050 Items: 27 Total B12 Items: 31

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

.Shell Circumferential Welds McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUIMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.010.050 1RHR-1A-3-4 MCM 1201.06-22 NDE-12 RT SS 35.750 RESIDUAL HEAT REMOVAL HEAT EXCHANGER Circumferential ND MC-ISIN3-1561-01.00 0.750 1A.

Class B Nozzle Belt to Flange Total C01.010 Items: 1

EOC 19 \

DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

• Head Circumferential Welds McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUI MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.020.030 1RHR-1A-2-3 MCM 1201.06-22 NDE-12 RT SS 35.750 RESIDUAL HEAT REMOVAL HEAT EXCHANGER Circumferential ND MC-ISIN3-1561-01.00 0.750 1A.

Class B Nozzle Belt to Head C01.020.070 1REGHX-1-HD1 MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (Shell 1)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Nozzle Belt to Head C01.020.071 1REGHX-1-HD2 MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (Shell 1)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Shell to Head Total C01.020 Items: 3

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report ITubesheet-to-Shell Weld McGuire 1 Page 16 12/0312003 E Inservice Inspection Plan for Interval 3 Outage 5 ITEM NUMBER ID NUMBER SYS ISO/DWG NUIMIBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.030.020 1REGHX-1-NB-TS MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (SHELL 1)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Nozzle Belt to Tubesheet C01.030.021 1REGHX-1-TS-SH MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (SHELL 1)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Tubesheet to Shell Total C01.030 Items: 2 Total C01 Items: 6

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY C-B, Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels Inservice Inspection Database Management System Plan Report

• Nozzles With Reinforcing Plate in Vessels > 1/2 McGuire Page 17 I. NomR.Thickness Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Reinforcing Plate Welds to Nozzle and Vessel ****

C02.031.001 1RHR-1A-INLET MCM 1201.06-22 NDE-35 PT SS 14.000 RESIDUAL HEAT REMOVAL HEAT EXCHANGER ND MC-ISIN3-1561-01.00 0.750 1A INLET NOZZLE A AND REINFORCING PAD.

Class B Nozzle to Reinforcing Pad / Shell C02.031.002 1RHR-1A-OUTLET MCM 1201.06-22 NDE-35 PT SS 14.000 RESIDUAL HEAT REMOVAL HEAT EXCHANGER ND MC-ISIN3-1561-01.00 0.750 1A OUTLET NOZZLE B AND REINFORCING PAD.

Class B Nozzle to Reinforcing Pad / Shell Total C02.031 Items: 2 Total C02 Items: 2

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY C-C. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping. Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 5 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC GNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.010.001 1NDHX-SUPPORT-1A MCM 1201.06-22 NDE-35 PT CS 0.000 RESIDUAL HEAT REMOVAL HEAT EXCHANGER ND MC-ISIN3-1561-01.00 0.750 1A SUPPORT.

Class B MCM 1201.06-48 WELDED ATTACHMENT.

Total C03.010 Items: 1 Total C03 Items: 1

EOC 19 (

DUKE ENERGY CORPORATION

(

CATEGORY D-A, Welded Attachments For IN!SERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inser 'vice Inspection Database Management System Plan Report OPressure Vessels McGuire 1 Page 19 E Ins ervice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.010.007 1KCHX-SUPPORT-1A MCM 1201.06-24 QAL-13 VT-1 NA 0.000 COMPONENT COOLING HEAT EXCHANGER A KC MC-ISIN3-1573-01.00 1.000 WELDED ATTACHMENT.

Class C D01.010.008 1KCST-SUPPORT-1A MCM 1201.04-113 QAL-13 VT-1 NA 0.000 COMPONENT COOLING SURGE TANK A KC MC-ISIN3-1573-01.01 0.250 WELDED ATTACHMENT.

Class C D01.010.009 1KFHX-SUPPORT-1A MCM 1201.06-0027 QAL-13 VT-1 NA 0.000 FUEL POOL COOLING HEAT EXCHANGER 1A KF MC-1220-32 0.250 WELDED ATTACHMENT.

Class C MC-ISIN3-1573-02.00 Total D01.010 Items: 3 Total D01 Items: 3

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class Piping Supports McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.010.009C 1-MCR-NC-678 MCSRD-NC-02/sht. 3 QAL-14 VT-3 NA 6.000 Mech Snubber NC 0.000 Class A F01.010.013C 1-MCR-NC-679 MCSRD-NC-02/sht. 3 QAL-14 VT-3 NA 6.000 Mech Snubber NC 0.000 Class A F01.010.018C 1-MCR-NC-687 MCSRD-NC-02/sht. 3 QAL-14 VT-3 NA 6.000 Hyd Snubber NC 0.000 Class A F01.010.054A 1-MCR-ND-510 MCSRD-ND-01/sht. 1 QAL-14 VT-3 NA 14.000 Rigid Support ND 0.000 Class A F01.010.112B 1-MCR-NI-577 MCSRD-NI-03/sht. 2 QAL-14 VT-3 NA 10.000 Rigid Restraint NI 0.000 Class A F01.010.113C 1-MCR-NI-585 MCSRD-NI-03/sht. 4 QAL-14 VT-3 NA 6.000 Mech Snubber NI 0.000 Class A F01.010.161C 1-MCR-NV-1062 MCSRD-NV-04/sht. 1 QAL-14 VT-3 NA 2.000 Mech Snubber NV 0.000 Class A F01.010.166C 1-MCR-NV-1290 MCSRD-NV-09/sht. 1 QAL-14 VT-3 NA 2.000 Mech Snubber NV 0.000 Class A Total F01.010 Items: 8

EOC 19 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping Supports McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ****

F01.020.019A 1-MCA-CA-H420 MCSRD-CAN/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Support CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.172C 1-MCA-ND-H260 MCSRD-FWA/sht. 7 QAL-14 VT-3 NA 14.000 Mech Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.173C 1-MCA-ND-H281 MCSRD-NDA/sht. 5 QAL-14 VT-3 NA 8.000 Hyd Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.174C 1-MCA-ND-H295 MCSRD-NDA/sht. 2 QAL-14 VT-3 NA 8.000 Mech Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.205A 1-MCA-NI-H178 MCSRD-NIB/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Support NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.206C 1-MCA-NI-H179 MCSRD-NIB/sht. 2 QAL-14 VT-3 NA 4.000 Spring Hgr NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.207C 1-MCR-NI-556 MCSRD-NI-03/sht. 3 QAL-14 VT-3 NA 6.000 Mech Snubber NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.224C 1-MCR-NI-721 MCSRD-NI-l1/sht.3 QAL-14 VT-3 NA 2.000 Hyd Snubber NI MC-ISIN3-1562-03.01 0.000 Class B

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping upports McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 5 1203/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.266C 1-MCA-NS-H98 MCSRD-NSB/sht. 1 QAL-14 VT-3 NA 10.000 Hyd Snubber NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.267C 1-MCA-NS-H102 MCSRD-NSC/sht. 1 QAL-14 VT-3 NA 10.000 Hyd Snubber NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.268A 1-MCA-NS-H103 MCSRD-NSC/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.325A 1-MCA-NV-H37 MC-1190-NV-01-02 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-02.01 0.000 Class B F01.020.326B MC-1683-NV.04-R36 MC-1683-NV.04 QAL-14 VT-3 NA 2.000 Rigid Restraint NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.327B 1-MCA-NV-H39 MC-1190-NV-01 -01 QAL-14 VT-3 NA 4.000 Rigid Restraint NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.328A 1-MCA-NV-H40 MC-1190-NV-01-01 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.329A 1-MCA-NV-H41 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.558C 1-MCA-SM-H101 MCSRD-SMA/sht. 3 QAL-14 VT-3 NA 42.000 Mech Snubber SM MC-ISIN3-1593-01.03 0.000 Class B

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report WClass 2 Piping upports McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Total F01.020 Items: 17

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report CIass 3 Piping Supports McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 5 12/0312003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.120A 1-MCA-KC-H80 MCSRD-KC-31/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support KC MC-ISIN3-1573-02.02 0.000 Class C F01.030.122B 1-MCA-KC-1015 MCSRD-KC-302/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN3-1573-01.01 0.000 Class C F01.030.135C 1-MCA-KC-2321 MCSRD-KC-305/sht.1 QAL-14 VT-3 NA 16.000 Mech Snubber KC MC-ISIN3-1573-01-01 0.000 Class C F01.030.151A 1-MCA-KD-082 MCSRD-KD-10/sht.2 QAL-14 VT-3 NA 6.000 Rigid Support KD MC-ISIN3-1609-01.01 0.000 Class C F01.030.154B 1-MCA-KD-81 MCSRD-KD-10/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KD MC-ISIN3-1609-01.01 0.000 Class C F01.030.183B 1-MCA-RN-1 131 MCSRD-RN-310/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.206B 1-MCA-RN-H939 MCSRD-CA-152/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN3-1574-01.00' 0.000 Class C F01.030.284B 1-MCA-YC-169 MCSRD-YC-304/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint YC MC-ISIN3-1618-01.00 0.000 Class C

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY F-A. Suports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Icass 3 Piping Supports McGuire 1 Page 25 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.285B 1-MCA-YC-1 14 MCSRD-YC-305/sht.1 QAL-14 VT-3 NA 5.000 Rigid Restraint YC MC-ISIN3-1618-01.00 0.000 Class C F01.030.288B 1-MCA-YC-189 MCSRD-YC-306/sht.1 QAL-14 VT-3 NA 5.000 Rigid Restraint YC MC-ISIN3-1618-01.00 0.000 Class C F01.030.289A 1-MCA-YC-060 MCSRD-YC-302/sht.2 QAL-14 VT-3 NA 8.000 Rigid Support YC MC-ISIN3-1618-01.00 0.000 Class C F01.030.290C 1-MCA-YC-181 MCSRD-YC-304/sht.1 QAL-14 VT-3 NA 8.000 Mech Snubber YC MC-ISIN3-1618-01.00 0.000 Class C Total F01.030 Items: 12

EOC 19 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• SuPports Other Than Piping Supports McGuire 1 Page 26 Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.017B 1RV-SUPPORT-A MCM 1201.01-78 QAL-14 VT-3 NA 0.000 REACTOR VESSEL SUPPORT (A HOT LEG).

NC MC-ISIN3-1553-01.00 0.000 REFERENCE DRAWING MCM 1201.01-79.

Class A MCM 1117.00-10 F01.040.018B 1RV-SUPPORT-B MCM 1201.01-78 QAL-14 VT-3 NA 0.000 REACTOR VESSEL SUPPORT (B COLD LEG).

NC MCISIN-1553-01.00 0.000 REFERENCE DRAWING MCM 1201.01-79.

Class A MCM 1117.00-10 F01.040.021B 1KFHX-SUPPORT-1A MCM 1201.06-0027 QAL-14 VT-3 NA 0.000 FUEL POOL COOLING HEAT EXCHANGER 1A KC MC-ISIN3-1570-01.01 0.250 SUPPORT.

Class C MC-1220-32 F01.040.022B 1KCST-SUPPORT-1A MCM 1201.04-113 QAL-14 VT-3 NA 0.000 COMPONENT COOLING SURGE TANK IA KC MC-ISIN3-1573-01.01 0.250 SUPPORT.

Class C F01.040.023C 1KCP-SUPPORT-1A1 MCM 1201.05-143 QAL-14 VT-3 NA 0.000 COMPONENT COOLING PUMP lAl SUPPORT.

KC MC-ISIN3-1573-01.00 0.000 Class C F01.040.024B 1KCHX-SUPPORT-1A MCM 1201.06-24 QAL-14 VT-3 NA 0.000 COMPONENT COOLING HEAT EXCHANGER 1A KC MC-ISIN3-1573-01.00 1.000 SUPPORT.

Class C F01.040.025B 1RNP-SUPPORT-1 A MCM 1201.05-0190 QAL-14 VT-3 NA 0.000 NUCLEAR SERVICE WATER PUMP 1A SUPPORT.

RN MC-ISIN3-1574-01.01 0.000 Class C Total F01.040 Items: 7 Total F01 Items: 44

1I EOC 19 1 DUKE ENERGY CORPORATION

(

CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MClass 1 and 2 Piping Welds McGuire 1 Page 27

• Inservice Inspection Plan for Interval 3 Outage 5 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Elements Subject to Thermal Fatigue ****

R01.011.018 1NC1F-1613 MCFI-1NC44 NDE-995 UT SS 1.500 TBD SEGMENT NC-027.

Circumferential NC MC-ISIN3-1553-01.00 160 0.281 Class A MC-1676-4.1 Pipe to Sweepolet R01.011.103 1NS112-1 MCFI-1NS48 NDE-12 RT SS 8.000 SEGMENTNS-019.

Circumferential NS MC-ISIN3-1563-01.00 0.148 Class B Elbow to Pipe R01.011.104 1NS88A-4 MCFI-1NS49 NDE-12 RT SS 8.000 SEGMENTNS-020.

Circumferential NS MC-ISIN3-1563-01.00 0.148 Class B Elbow to Pipe R01.011.146 1NV77-3 MCFI-1NV13 NDE-600 UT SS 3.000

• SEGMENT NV-020A.

Circumferential NV MC-ISIN3-1554-01.01 PDI-UT-2 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Reducer R01.011.202 1RV1F104A MCFI-1RV31 NDE-600 UT CS 12.000

• SEGMENT RV-002.

Circumferential RV MC-ISIN3-1604-03.00 PDI-UT-2 0.375 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Valve Total R01.011 Items: 5

• • • • Elements Subject to Corrosive, Erosive, or Cavitation Wastage R01.013.003 1RV1F109A MCFI-1RV31 NDE-946 UT CS 12.000 STEP SEGMENT RV-012.

Circumferential RV MC-ISIN3-1604-03.00 0.375 WEDGE EXAMINE A 1 FT. LENGTH OF PIPE AT WELD TO Class B Pipe to DETERMINE WALL THICKNESS.

Pipe Total R01.013 Items: 1 Total R01 Items: 6

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 6 Refueling Outage EOC 20 ISI Inspection Listing Revision 0

EOC 20 (

DUKE ENERGY CORPORATION

(

CATEGORY B-B, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report Pressurizer McGuire 1 Page 1 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER 3ERS SYS ISO/DWG NUI VIE PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Shell-to-Head; Longitudinal ****

B02.012.001 1PZR-6 MCM 1201.01-170 NDE-620 UT CS 91.500 50337 PRESSURIZER LOWER HEAD TO SHELL.

Longitudinal MCM 1201.01-171 PDI-UT-6 3.750 50236A Class A Head to Shell Total B02.012 Items: 1

EOC 20 ( (

DUKE ENERGY CORPORATION CATEGORY B-B, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report MSteam Generators (Primary Side) McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI VIBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Tubesheet-to-Head Weld ****

B02.040.002 1SGB-W22 MCM 1201.01-0782 NDE-620 UT CS 0.000 5131617 STEAM GENERATOR B PRIMARY HEAD TO Circumferential MCM 1201.01-0791 PDI-UT-6 6.438 50236A TUBESHEET.

Class A Head to Tubesheet Total B02.040 Items: 1 Total B02 Items: 2

EOC20 (

DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE:RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Head Nuts ****

B06.010.012 1RPV-449-02-12 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.013 1RPV-449-02-13 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.014 1RPV-449-02-14 MCM 1201.01-204 QAL-13 VT-i CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.015 1RPV-449-02-15 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.037 1RPV-449-02-37 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.038 1RPV-449-02-38 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.039 1RPV-449-02-39 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.040 1RPV-449-02-40 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report WeactorVessel McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 E

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.041 1RPV-449-02-41 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.042 1RPV-449-02-42 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.043 1RPV-449-02-43 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.044 1RPV-449-02-44 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.045 1RPV-449-02-45 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.046 1RPV-449-02-46 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.047 1RPV-449-02-47 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.048 1RPV-449-02-48 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.049 1RPV-449-02-49 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01 -206 1.770

EOC 20 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.050 1RPV-449-02-50 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.051 1RPV-449-02-51 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.052 1RPV-449-02-52 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.053 1RPV-449-02-53 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 B06.010.054 1RPV-449-02-54 MCM 1201.01-204 QAL-13 VT-1 CS 10.540 REACTOR VESSEL CLOSURE HEAD NUT.

NC MCM 1201.01-206 1.770 Total B06.010 Items: 22

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE :RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Studs, when removed ****

B06.030.012 1RPV-449-01-12 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.012A1RPV-449-01-12 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.013 1RPV-449-01-13 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.013A1RPV-449-01-13 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A 806.030.014 1RPV-449-01-14 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201 .01-206 57.688 Class A B06.030.014A 1RPV-449-01-14 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.015 1RPV-449-01-15 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.015A 1RPV-449-01-15 MCM 1201.01-204 NDE -25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A

EOC 20 f DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 7 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.037 1RPV-449-01-37 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.037A 1RPV-449-01-37 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.038 1RPV-449-01-38 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.038A 1RPV-449-01-38 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.039 1RPV-449-01-39 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.039A1RPV-449-01-39 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.040 1RPV-449-01-40 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.040A 1RPV-449-01-40 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.041 1RPV-449-01-41 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A

EOC 20 ( !I DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Wteactor Vessel McGuire 1 Page 8 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.041A1RPV-449-01-41 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.042 1RPV-449-01-42 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.042A1RPV-449-01-42 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.043 1RPV-449-01-43 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.043A 1RPV-449-01-43 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.044 1RPV-449-01-44 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.044A 1RPV-449-01-44 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.045 1RPV-449-01-45 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.045A 1RPV-449-01-45 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A

EOC20 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 9 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.046 1RPV-449-01-46 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.046A 1RPV-449-01-46 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.047 1RPV-449-01-47 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.047A1RPV-449-01-47 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.048 1RPV-449-01-48 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.048A 1RPV-449-01-48 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.049 1RPV-449-01-49 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.049A 1RPV-449-01-49 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.050 1RPV-449-01-50 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A

EOC20 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report reactor Vessel McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.050A 1RPV-449-01-50 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.051 1RPV-449-01-51 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.051A 1RPV-449-01-51 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.052 1RPV-449-01-52 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.052A 1RPV-449-01-52 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.053 1RPV-449-01-53 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.053A 1RPV-449-01-53 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A B06.030.054 1RPV-449-01-54 MCM 1201.01-204 PDI-UT-5 UT CS 7.000 50501 REACTOR VESSEL CLOSURE HEAD STUD.

NC MCM 1201.01-206 57.688 Class A B06.030.054A1RPV-449-01-54 MCM 1201.01-204 NDE-25 MT CS 7.000 CLOSURE STUD MCM 1201.01-206 57.688 Class A

EOC20 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 11 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO)/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Total B06.030 Items: 44

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reator Vessel McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO) DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Closure Washers, Bushings ****

B06.050.012 1RPV-449-03-12 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.013 1RPV-449-03-13 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.014 1RPV-449-03-14 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.015 1RPV-449-03-15 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.037 1RPV-449-03-37 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.038 1RPV-449-03-38 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.039 1RPV-449-03-39 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.040 1RPV-449-03-40 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.050.041 1RPV-449-03-41 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.042 1RPV-449-03-42 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.043 1RPV-449-03-43 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.044 1RPV-449-03-44 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.045 1RPV-449-03-45 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.046 1RPV-449-03-46 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.047 1RPV-449-03-47 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.048 1RPV-449-03-48 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.049 1RPV-449-03-49 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A

EOC 20 ¢ DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 14 12/03/2003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.050.050 1RPV-449-03-50 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.051 1RPV-449-03-51 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.052 1RPV-449-03-52 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.053 1RPV-449-03-53 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A B06.050.054 1RPV-449-03-54 MCM 1201.01-204 QAL-13 VT-1 CS 10.560 REACTOR VESSEL CLOSURE HEAD WASHER.

NC MCM 1201.01-206 1.719 Class A Total B06.050 Items: 22

EOC20 ( (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Steam Generators McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,IDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Bolts and Studs ****

B06.090.001 SGA-MW-X2-Y1 MCM 1201.01-0747 NDE-2047 UT CS 2.500 7C015 STEAM GENERATOR 1A PRIMARY INLET NC MCM 1201.01-0684 26.625 MANWAY BOLTING. 20 STUDS. X2-Y1 Class A QUADRANT.

B06.090.002 1SGA-MW-X2-Y2 MCM 1201.01-0747 NDE-2047 UT CS 2.500 7C015 STEAM GENERATOR 1A PRIMARY OUTLET NC MCM 1201.01-0684 26.625 MANWAY BOLTING. 20 STUDS. X2-Y2 Class A QUADRANT.

B06.090.007 1SGD-MW-X1-Y1 MCM 1201.01-0747 NDE-2047 UT CS 2.500 7C015 STEAM GENERATOR D PRIMARY INLET NC MCM 1201.01-0683 26.625 MANWAY BOLTING. 20 STUDS. X1-Y1 Class A QUADRANT.

B06.090.008 1SGD-MW-X1-Y2 MCM 1201.01-0747 NDE-2047 UT CS 2.500 7C015 STEAM GENERATOR D PRIMARY OUTLET NC MCM 1201.01-0683 26.625 MANWAY BOLTING. 20 STUDS. X1-Y2 Class A QUADRANT.

Total B06.090 Items: 4

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report MSteam Generators McGuire 1 Page 16 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE :RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled B06.100.001 1SGA-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.002 1SGA-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.003 1SGB-MW-X1-Yl MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR B PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.004 1SGB-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1B PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.005 1SGC-MW-X2-Yl MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1C PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100,006 1SGC-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1C PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.007 1SGD-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1D PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.008 1SGD-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1D PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

Total B06.100 Items: 8

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Steam Generators McGuire 1 Page 17 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO)/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nuts, Bushings, and Washers ****

B06.110.001 1SGA-MW-X2-Y1 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR 1A PRIMARY INLET NC MCM 1201.01-0684 0.000 MANWAY NUTS. 20 NUTS. X2-Y1 QUADRANT.

Class A B06.110.002 1SGA-MW-X2-Y2 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR 1A PRIMARY OUTLET NC MCM 1201.01-0684 0.000 MANWAY NUTS. 20 NUTS. X2-Y2 QUADRANT.

Class A B06.110.007 1SGD-MW-X1-Y1 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR D PRIMARY INLET NC MCM 1201.01-0683 0.000 MANWAY NUTS. 20 NUTS. X1-Y1 QUADRANT.

Class A B06.110.008 1SGD-MW-X1-Y2 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR 1D PRIMARY OUTLET NC MCM 1201.01-0683 0.000 MANWAY NUTS. 20 NUTS. X1-Y2 QUADRANT.

Class A Total B06.110 Items: 4

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO, /DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts and Studs ****

B06.180.004 1RCP-1D-F MCM 1201.01-120 PDI-UT-5 UT CS 4.500 50465 REACTOR COOLANT PUMP D MAIN FLANGE NC MCM 1201.01-193 30.500 BOLTING. 24 STUDS.

Class A Total B06.180 Items: 1

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 19 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,fDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.190.001 1RCP-1A-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1A MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.002 1RCP-1B-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1B MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.003 1RCP-1C-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1C MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.004 1RCP-1D-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP D MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A Total B06.190 Items: 4

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nuts, Bushings, and Washers ****

B06.200.001 1RCP-1D-F MCM 1201.01-120 QAL-13 VT-1 CS 4.500 REACTOR COOLANT PUMP D MAIN FLANGE NC MCM 1201.01-193 0.000 NUTS. 24 NUTS.

Total B06.200 Items: 1 Total B06 Items: 110

EOC 20 ' (

DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaininq INSERVICE INSPECTION PLAN MANAGEMENT Bolting. 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,IDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.050.202 1NV137-FL1 MCFI-1NV137 QAL-13 VT-1 SS 1.000 FLANGE BOLTING (4 STUDS). BOLT SIZE NV MC-ISIN3-1554-01.00 0.000 DETERMINED USING CHART IN M/P/O/A/7650/01 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

B07.050.203 1NV143-FL2 MCFI-1NV143 QAL-13 VT-1 SS 1.000 FLANGE BOLTING (4 STUDS). BOLT SIZE NV MC-ISIN3-1554-01.01 0.000 DETERMINED USING CHART IN M/P/0/A/7650/01 Class A ENCLOSURE 13.2. EXAMINE ALL BOLTING MATERIAL.

Total B07.050 Items: 2

F EOC 20 k DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaininc INSERVICE INSPECTION PLAN MANAGEMENT Bolting 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO,/DWG NUMBERS PROC INSP REQ MAT/SCH DIAfTHK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.070.001A NC-1 MCM 1205.09-0001 QAL-13 VT-1 SS 1.000 6" VALVE, MCFI-1NC5. INSPECT ONLY ONE NC MC-ISIN3-1553-01.00 0.000 VALVE INTHIS GROUP (A-1C) PER INTERVAL.

Class A B07.070.063B 1NI-129 MCM 1205.00-0006 QAL-13 VT-1 SS 1.875 8" VALVE, MCFI-1NI53. INSPECT ONLY ONE NI MC-ISIN3-1562-03.00 0.000 VALVE INTHIS GROUP (63A-63B) PER INTERVAL Class A (ITEM # 4J-01 0).

Total B07.070 Items: 2

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report WCRD Housings McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.080.001 1CRD-HOUSING MCM 1201.01-224 QAL-13 VT-1 SS 0.000 APPLIES TO 53 CRD HOUSINGS. EXAMINE ONLY NC MC-ISIN3-1553-01.00 6.000 CRD BOLTING THAT IS REUSED WHEN Class A MCM 1201.13-35 HOUSING IS REASSEMBLED.

Total B07.080 Items: 1 Total B07 Items: 5

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-K, Welded Attaci iments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And V;alves Inservice Inspection Database Management System Plan Report McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

B10.020.001 1-MCR-NC-762 MCSRD-NC-02/sht. 2 NDE-35 PT SS 6.000 WELDED ATTACHMENT. INSPECT WITH Mech Snubber NC MC-ISIN3-1553-02.00 0.438 F01.010.019C.

Class A 1-MCR-NC-762 Total B10.020 Items: 1 Total B10 Items: 1

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-L-2, Pump Casings INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 25 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Pump Casing ****

B12.020.001 1RCP-1A MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1A CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.002 1RCP-1B MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1B CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.003 1RCP-1 C MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1C CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.004 1RCP-1D MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP D CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

Total B12.020 Items: 4

EOC20 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 26 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE:RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Valve Body, Exceeding NPS 4

• B12.050.001A NC-1 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0001).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001B NC-2 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0002).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR,OR VOLUMETRIC EXAMINATION.

B12.050.001C1NC-3 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0003).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIROR VOLUMETRIC EXAMINATION.

B12.050.002A 1ND-1 B MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.002B 1ND-2A MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003A 1NI-54A MCM-1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-005). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N179 VALVES: 1NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003B 1NI-65B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N180 VALVES: 1NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE,

EOC20 (

DUKE ENERGY CORPORATION

(

CATEGORY B-M-2, Valve Bodv INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 27 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003C1NI-76A MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1N-54A, 1NI-65B, 1NI-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003D1NI-88B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1NI-54A, 1NI-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004A 1NI-59 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1N-59, 1N-60,1 N-70, 1N-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004B 1NI-60 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl79 VALVES: 1N-59, 1NI-60,1 N-70, 1N-71, 1N-81, 1NI-82, 1NI-93, OR 1N-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004C 1NI-70 MC 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1NI-59, 1N-60, 1N-70, 1N-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004D1NI-71 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl62 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 28 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004E 1NI-81 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1N-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B1 2.050.004F 1N1-82 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10' ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1NI-59, 1N-60, 1NI-70, 1NI-71, 1Nl-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004G1NI-93 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10' ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1NI-59, 1N-60, 1N-70, 1N-71, 1NI-81, 1N-82, 1NI-93, OR 1N-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004H 1N1-94 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10 ATWOOD-MORRILL CHECK VALVE (ITEM#

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N186 VALVES: 1N-59, 1N-60, 1N-70, 1NI-71, 1N-81, 1N-82, 1 NI-93, OR 1N-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.005A 1NI-125 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 N153 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Valves McGuire 1 Page 29 4- tt1^^...

w Inservice Inspection Plan for Interval 3 Outage 6 l ZlUlZUU3 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.005B 1NI-129 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

Nt MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 N153 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006A1NI-126 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006B 1NI-134 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-1 80, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006C1NI-157 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-11N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-1 80, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B1 2.050.006D 1NI-1 75 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-1 80, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 20 (

DUKE ENERGY CORPORATION

(

CATEGORY B-M-2. Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 30 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.006E 1NI-180 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1N-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006F 1NI-181 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-11N153 VALVES: 1NI-126, 1NI-134, 1NI-157,1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007A 1NI-160 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.00 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI35 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007B 1NI-176 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM#

NI MC-ISIN3-1562-03.01 0.000 5J-001). INSPECTONE OFTHE FOLLOWING Class A MCFI-1NI78 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

Total B12.050 Items: 27 Total B12 Items: 31

EOC20 (

DUKE ENERGY CORPORATION

(

CATEGORY B-O, Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Control Rod Housings Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 31 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welds in CRD Housing ****

B14.010.013 1RPV-CRDM-67 MCM 1201.01-224 NDE-35 PT SS-Inconel 4.000 CRD HOUSING WELD. (PERIPHERAL)

NC MC-ISIN3-1553-01.00 0.642 Class A Total B14.010 Items: 1 Total B14 Items: 1

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report

• Shell Circumferential Welds McGuire 1 Page 32 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.010.040 1ELDHX-SH-FLG MCM 1201.06-0010 NDE-3630 UT CS 8.625 50327 EXCESS LETDOWN HEAT EXCHANGER.

Circumferential NV MC-ISIN3-1554-01.02 0.322 Class B Shell to Flange Total C01.010 Items: 1

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report Head Circumferential Welds McGuire 1 Page 33 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUf MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.020.020 1ELDHX-SH-HD MCM 1201.06-0010 NDE-3630 UT CS 8.625 50327 EXCESS LETDOWN HEAT EXCHANGER.

Circumferential NV MC-ISIN3-1554-01.02 0.322 Class B Shell to Head C01.020.021 1ELDHX-HD-FLG MCM 1201.06-0010 NDE-3630 UT SS-CS 9.500 CB0803 EXCESS LETDOWN HEAT EXCHANGER.

Circumferential NV MC-ISIN3-1554-01.02 0.750 50471 CARBON STEEL WITH 3/16" TYPE 304 SS Class B Head to CLADDING ON FLANGE SIDE OF WELD.

Flange C01.020.072 1REGHX-2-HD1 MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (Shell 2)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Nozzle Belt to Head C01.020.073 1REGHX-2-HD2 MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (Shell 2)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Shell to Head Total C01.020 Items: 4

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report Iubesheet-to-Shell Weld McGuire 1 Page 34 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUIMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.030.010 1BCSHX-SH-48 MCM 1201.06-25 NDE-3630 UT CS 55.250 50422 CONTAINMENT SPRAY HEAT EXCHANGER 1B.

Circumferential NS MC-ISIN3-1563-01.00 0.625 Class B Shell to Tubesheet C01.030.022 1REGHX-2-NB-TS MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (SHELL 2)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Nozzle Belt to Tubesheet C01.030.023 1REGHX-2-TS-SH MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (SHELL 2)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Tubesheet to Shell Total C01.030 Items: 3 Total C01 Items: 8

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY C-B, Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels Inservice Inspection Database Management System Plan Report

• Nozzles With Reinforcing Plate in Vessels > 1/2 McGuire 1 Page 35 Min Nor. Thickness Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Reinforcing Plate Welds to Nozzle and Vessel C02.031.003 1ACSHX-A-INLET MCM 1201.06-25 NDE-25 MT CS 10.000 CONTAINMENT SPRAY HEAT EXCHANGER 1A NS MC-ISIN3-1563-01.00 0.625 INLET NOZZLE A AND REINFORCING PAD.

Class B Nozzle to Reinforcing Pad / Shell C02.031.004 1ACSHX-B-OUTLET MCM 1201.06-25 NDE-25 MT CS 10.000 CONTAINMENT SPRAY HEAT EXCHANGER 1A NS MC-ISIN3-1563-01.00 0.625 OUTLET NOZZLE B AND REINFORCING PAD.

Class B Nozzle to Reinforcing Pad / Shell Total C02.031 Items: 2 Total C02 Items: 2

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 36 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWCi NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.010.004 1REGHX-SUPPORT MCM 1201.06-0061 NDE-35 PT SS 0.000 REGENERATIVE HEAT EXCHANGER SUPPORT.

NV MCM 1201.06-0069 0.250 WELDED ATTACHMENT.

Class B C03.010.005 1ELDHX-SUPPORT MCM 1201.06-0010 NDE-25 MT SS 0.000 EXCESS LETDOWN HEAT EXCHANGER NV MC-ISIN3-1554-01.02 0.375 SUPPORT.

Class B (2) WELDED ATTACHMENTS.

Total C03.010 Items: 2

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps. And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 37 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Aftachments ****

C03.020.001 1-MCR-CA-H440 MCSRD-CAO/sht. 1 NDE-25 MT CS 6.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint CA MC-ISIN3-1592-01.00 1.000 F01.020.004B.

Class B 1-MCR-CA-H440 C03.020.002 1-MCR-CA-H442 MCSRD-CAO/sht. 1 NDE-25 MT CS 6.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint CA MC-ISIN3-1592-01.00 0.125 F01.020.014B.

Class B 1-MCR-CA-H442 C03.020.041 1-MCA-NS-H9 MCSRD-NSB/sht. 1 NDE-35 PT SS 10.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support NS MC-ISIN3-1563-01.00 0.216 F01.020.264A.

Class B 1-MCA-NS-H9 C03.020.043 1-MCA-NS-H55 MCSRD-NSA/sht. 1 NDE-35 PT SS 10.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint NS MC-ISIN3-1563-01.00 0.125 F01.020.269B.

Class B 1-MCA-NS-H55 C03.020.044 1-MCA-NS-H69 MCSRD-NSA/sht. 2 NDE-35 PT SS 10.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support NS MC-ISIN3-1563-01.00 1.000 F01.020.263A.

Class B 1-MCA-NS-H69 C03.020.054 1-MCA-NV-H51 MC-1190-NV-01-01 NDE-35 PT SS 4.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support NV MC-ISIN3-1554-03.01 0.125 F01.020.334A.

Class B 1-MCA-NV-H5 C03.020.061 1-MCA-SA-H18 MCSRD-SAA/sht. 1 NDE-25 MT CS 6.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint SA MC-ISIN3-1593-01.02 0.125 F01.020.502B.

Class B 1-MCA-SA-H18 C03.020.071 1-MCA-VQ-H6 MCSRD-VQA/sht. 1 NDE-35 PT SS 6.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint VQ MC-ISIN3-1585-01.00 0.750 F01.020.656B.

Class B 1-MCA-VQ-H6 Total C03.020 Items: 1 Total C03 Items: 10

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY CGE Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Pumps And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 38 Inservice Inspection Plan for Interval 3 Outage 6 12/0312003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Valve Body Welds ****

C06.020.003E 1SV0O13AB-1 MCM 1205.09-011/1 NDE-35 PT CS 6.000 ITEM # POR-002. INSPECT ONE VALVE IN THIS SV MC-ISIN3-1593-01.00 1.000 GROUP (3A-3H) PER INTERVAL.

Class B Intake Pipe to Valve Body C06.020.003F1SVOO13AB-2 MCM 1205.09-011/1 NDE-35 PT CS 6.000 ITEM # POR-002. INSPECT ONE VALVE IN THIS SV MC-ISIN3-1593-01.00 1.000 GROUP (3A-3H) PER INTERVAL.

Class B Valve Body to Valve Body Total C06.020 Items: 2 Total C06 Items: 2

EOC 20 I DUKE ENERGY CORPORATION CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report ITE Bure Vessels McGuire 1 Page 39 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW( GNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.010.005 1KDHX-SUPPORT-1A MCM 1201.06-0042 QAL-13 VT-1 NA 0.000 DIESEL GENERATOR COOLING WATER HEAT KD MC-ISIN3-1609-01.00 0.750 EXCHANGER 1A WELDED ATTACHMENT.

Class C D01.010.006 1RNST-SUPPORT-1A MCM 1218.02-8 QAL-13 VT-1 NA 0.000 NUCLEAR SERVICE WATER STRAINER 1A RN MCM 1218.02-9 0.500 WELDED ATTACHMENT.

Class C MC-ISIN3-1574-01.00 Total D01.010 Items: 2

EOC 20 JI DUKE ENERGY CORPORATION

(

CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 40 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.020.062 1-MCA-KC-H452 MCSRD-KC-304/sht.1 QAL-13 VT-1 NA 20.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support KC MC-ISIN3-1573-01.01 0.500 F01.030.113A.

Class C 1-MCA-KC-H452 Total D01.020 Items: 1 Total D01 Items: 3

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 1 Piping Supports McGuire 1 Page 41 Inservice Inspection Plan for Interval 3 Outage 6 12/0312003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ****

F01.010.007C1-MCR-NC-573 MCSRD-WL-02/sht. 1 QAL-14 VT-3 NA 2.000 Hyd Snubber NC 0.000 Class A F01.010.014C 1-MCR-NC-572 MCSRD-WL-02/sht. 4 QAL-14 VT-3 NA 2.000 Spring Hgr NC 0.000 Class A F01.010.015C 1-MCR-NC-574 MCSRD-WL-02/sht. 1 QAL-14 VT-3 NA 2.000 Hyd Snubber NC 0.000 Class A F01.010.016C 1-MCR-NC-764 MCSRD-NC-02/sht. 2 QAL-14 VT-3 NA 3.000 Mech Snubber NC 0.000 Class A F01.010.019C 1-MCR-NC-762 MCSRD-NC-02/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber NC 0.438 Class A F01.010.020C 1-MCR-NC-680 MCSRD-NC-02/sht. 3 QAL-14 VT-3 NA 6.000 Constant Support NC 0.000 Class A F01.010.021C 1-MCR-NC-763 MCSRD-NC-02/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber NC 0.000 Class A F01.010.055B 1-MCR-NI-581 MCSRD-NI-03/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint NI 0.000 Class A

EOC 20 (

DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 1 Piping Supports McGuire 1 Page 42 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.010.111A 1-MCR-NI-651 MCSRD-ND-01/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NI 0.000 Class A F01.010.114C 1-MCR-NI-589 MCSRD-NI-03/sht. 2 QAL-14 VT-3 NA 10.000 Hyd Snubber NI 0.000 Class A F01.010.117C1-MCR-NI-616 MCSRD-NI-01/sht.4 QAL-14 VT-3 NA 10.000 Spring Hgr NI 0.000 Class A F01.010.118A 1-MCR-NI-731 MCSRD-NI-09/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NI 0.000 Class A F01.010.154C 1-MCR-NV-855 MCSRD-NV-06/sht. 1 QAL-14 VT-3 NA 2.000 Hyd Snubber NV 0.000 Class A F01.010.157A 1-MCR-NV-1053 MCSRD-NV-04/sht. 4 QAL-14 VT-3 NA 3.000 Rigid Support NV 0.000 Class A F01.010.158A 1-MCR-NV-1056 MCSRD-NV-04/sht. 3 QAL-14 VT-3 NA 2.000 Rigid Support NV 0.000 Class A Total F01.010 Items: 15

EOC 20 ( (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report CIass 2 Pipin Supports McGuire 1 Page 43 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.020.002C 1-MCA-CA-H384 MCSRD-CAM/sht. 2 QAL-14 VT-3 NA 6.000 Spring Hgr CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.004B 1-MCR-CA-H440 MCSRD-CAO/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint CA MC-ISIN3-1592-01.00 1.000 Class B F01.020.009C 1-MCA-CA-H417 MCSRD-CAN/sht. 2 QAL-14 VT-3 NA 6.000 Hyd Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.014B 1-MCR-CA-H442 MCSRD-CAO/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint CA MC-ISIN3-1592-01.00 0.125 Class B F01.020.015C 1-MCR-CA-H488 MCSRD-CAP/sht. 1 QAL-14 VT-3 NA 6.000 Spring Hgr CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.016C 1-MCA-CA-H427 MCSRD-CAO/sht. 2 QAL-14 VT-3 NA 6.000 Hyd Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01,020.020B 1-MCA-CA-H516 MCSRD-CAN/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Restraint CA MC-ISIN3-1592-01.00 0.000 Class B FO1.020.023C 1-MCA-CA-H421 MCSRD-CAN/sht. 2 QAL-14 VT-3 NA 4.000 Spring Hgr CA MC-ISIN3-1592-01.00 0.000 Class B

EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report MClass 2 Piping Supports McGuire 1 Page 44 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.053A 1-MCA-CF-H171 MCSRD-CFC/sht. 13 QAL-14 VT-3 NA 18.000 Rigid Support CF MC-ISIN3-1591-01.01 0.000 Class B F01.020.056C 1-MCR-CF-H396 MCSRD-CFC/sht. 12 QAL-14 VT-3 NA 18.000 Spring Hgr CF MC-ISIN3-1591-01.01 0.000 Class B F01.020.103C 1-MCA-FW-H132 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Spring Hgr FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.107A 1-MCA-FW-H14 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.108A 1-MCA-FW-H9 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.109A 1-MCA-FW-H3 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 24.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.11OA 1-MCA-FW-H4 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 18.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.111A 1-MCA-FW-H5 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 12.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B FO1.020.115C 1-MCA-FW-H134 MCSRD-FWA/sht. 8 QAL-14 VT-3 NA 8.000 Hyd Snubber FW MC-1S1N3-1571-01.00 0.000 Class B

EOC20 (

DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping Supports McGuire 1 Page 45 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.020.116C 1-MCA-FW-H130 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Mech Snubber FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.159C 1-MCA-ND-H70 MCSRD-NDA/sht. 8 QAL-14 VT-3 NA 8.000 Spring Hgr ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.164C 1-MCA-ND-H86 MCSRD-NDA/sht. 1 QAL-14 VT-3 NA 8.000 Spring Hgr ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.165C 1-MCA-ND-H152 MCSRD-NDA/sht. 6 QAL-14 VT-3 NA 8.000 Spring Hgr ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.166A 1-MCA-ND-H157 MCSRD-NDA/sht. 3 QAL-14 VT-3 NA 12.000 Rigid Support ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.171 C 1-MCA-ND-H258 MCSRD-FWA/sht. 7 QAL-14 VT-3 NA 14.000 Hyd Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.201C 1-MCA-NI-H1 MCSRD-NIA/sht. 1 QAL-14 VT-3 NA 6.000 Spring Hgr NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.204A 1-MCR-NI-540 MCSRD-NI-03/sht. 3 QAL-14 VT-3 NA 6.000 Rigid Support NI MC-ISIN3-1562-03.01 0.000 Class B F01.020.21 OA 1-MCR-NI-890 MCSRD-NI-13/sht.1 QAL-14 VT-3 NA 3.000 Rigid Support NI MC-ISIN3-1562-01.00 0.000 Class B

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Piping Supports McGuire 1 Page 46 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.227B 1-MCR-NI-784 MCSRD-NI-09/sht. 3 QAL-14 VT-3 NA 4.000 Rigid Restraint NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.228A 1-MCR-NI-656 MCSRD-ND-01/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.263A 1-MCA-NS-H69 MCSRD-NSA/sht. 2 QAL-14 VT-3 NA 10.000 Rigid Support NS MC-ISIN3-1563-01.00 1.000 Class B F01.020.264A 1-MCA-NS-H9 MCSRD-NSB/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Support NS MC-ISIN3-1563-01.00 0.216 Class B F01.020.269B 1-MCA-NS-H55 MCSRD-NSA/sht. 1 QAL-14 VT-3 NA 10.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.125 Class B F01.020.270A 1-MCR-NS-510 MCSRD-NS-01/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.271A 1-MCR-NS-506 MCSRD-NS-01/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.272B 1-MCR-NS-61 1 MCSRD-NS-03/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.273B 1-MCR-NS-602 MCSRD-NS-03/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Restraint NS MC-ISIN3-1563-01.00 0.000 Class B

EOC 20 1 DUKE ENERGY CORPORATION

¢ CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Iass 2 Pipinn Supports McGuire 1 Page 47 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.330A 1-MCA-NV-H42 MC-1190-NV-01 -03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.331 A 1-MCA-NV-H43 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.332B 1-MCA-NV-H48 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Restraint NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.333A 1-MCA-NV-H49 MC-1 190-NV-01 -01 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.334A 1-MCA-NV-H51 MC-1190-NV-01-01 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-03.01 0.125 Class B F01.020.335B 1-MCA-NV-H53 MCSRD-NVA/sht. 9 QAL-14 VT-3 NA 3.000 Rigid Restraint NV MC-ISIN3-1554-01.00 0.000 Class B F01.020.336A 1-MCA-NV-H94 MCSRD-NVE/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-02.00 0.000 Class B F01.020.502B 1-MCA-SA-H18 MCSRD-SAA/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint SA MC-ISIN3-1593-01.02 0.125 Class B F01.020.559C 1-MCA-SM-H105 MCSRD-SMA/sht. 3 QAL-14 VT-3 NA 42.000 Spring Hgr SM MC-ISIN3-1593-01.03 0.000 Class B

EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report CIass 2 Piping Supports McGuire 1 Page 48 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS FO1.020,565B 1-MCA-SM-H22 MCSRD-SMA/sht. 2 QAL-14 VT-3 NA 42.000 Rigid Restraint SM MC-ISIN3-1593-01.00 0.000 Class B F01.020.566B 1-MCA-SM-H23 MCSRD-SMA/sht. 2 QAL-14 VT-3 NA 36.000 Rigid Restraint SM MC-ISIN3-1593-01.00 0.000 Class B F01.020.654C 1-MCR-VQ-507 MCSRD-VQ-02/sht. 1 QAL1 4 VT-3 NA 6.000 Spring Hgr VQ MC-ISIN3-1585-01.00 0.000 Class B F01.020.656B 1-MCA-VQ-H6 MCSRD-VQA/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint VQ MC-ISIN3-1585-01.00 0.750 Class B F01.020.657B 1-MCR-VQ-515 MCSRD-VQ-02/sht. I QAL-14 VT-3 NA 6.000 Rigid Restraint VQ MC-ISIN3-1585-01.00 0.000 Class B Total F01.020 Items: 49

EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report class 3 Piping Supports McGuire 1 Page 49 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.030.107B 1-MCR-KC-553 MCSRD-KC-01/sht.7 QAL-14 VT-3 NA 8.000 Rigid Restraint KC MC-ISIN3-1573-03-00 0.000 Class C F01.030.108B 1-MCR-KC-506 MCSRD-KC-02/sht.1 QAL-14 VT-3 NA 6.000 Rigid Restraint KC MC-ISIN3-1573-03-00 0.000 Class C F01.030.109A 1-MCA-KC-1039 MCSRD-KC-302/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support KC MC-ISIN3-1573-01.01 0.000 Class C F01.030.1 1OA 1-MCA-KC-2283 MCSRD-KC-302/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support KC MC-ISIN3-1573-01.01 0.000 Class C F01.030.113A 1-MCA-KC-H452 MCSRD-KC-304/sht.1 QAL-14 VT-3 NA 20.000 INSPECT WITH DO1.020.062.

Rigid Support KC MC-ISIN3-1573-01.01 0.500 Class C F01.030.117A 1-MCA-KC-1005 MCSRD-KC-305/sht.4 QAL-14 VT-3 NA 16.000 Rigid Support KC MC-ISIN3-1573-01-00 0.000 Class C F01.030.118A 1-MCA-KC-2325 MCSRD-KC-305/sht.4 QAL-14 VT-3 NA 16.000 Rigid Support KC MC-ISIN3-1573-01-00 0.000 Class C F01.030.119A 1-MCA-KC-2313 MCSRD-KC-305/sht.5 QAL-14 VT-3 NA 10.000 Rigid Support KC MC-ISIN3-1573-02-00 0.000 Class C

EOC20 ( (

DUKE ENERGY CORPORATION CATEGORY F-A Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 3 Piping Suorts McGuire 1 Page 50 E ~ PqP Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.126A 1-MCA-KC-2228 MCSRD-KC-315/sht.3 QAL-14 VT-3 NA 10.000 Rigid Support KC MC-ISIN3-1573-03-01 0.000 Class C F01.030.127B 1-MCA-KC-H328 MCSRD-KC-305/sht.1 QAL-14 VT-3 NA 16.000 Rigid Restraint KC MC-ISIN3-1573-01-01 0.000 Class C F01.030.137C 1-MCA-KC-1312 MCSRD-KC-315/sht.5 QAL-14 VT-3 NA 14.000 Spring Hgr KC MC-ISIN3-1573-02-00 0.000 Class C F01.030.178B 1-MCA-RN-2475 MCSRD-RN-306 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN3-1574-03.00 0.000 Class C F01.030.179B 1-MCA-RN-1508 MCSRD-RN-307/sht.3 QAL-14 VT-3 NA 36.000 Rigid Restraint RN MC-ISIN3-1574-03.00' 0.000 Class C F01.030.180B 1-MCA-RN-2017 MCSRD-RN-307/sht.4 QAL-14 VT-3 NA 18.000 Rigid Restraint RN MC-ISIN3-1574-03.01' 0.000 Class C F01.030.181B 1-MCA-RN-2346 MCSRD-RN-309/sht.1 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN3-1574-01.00' 0.000 Class C F01.030.182B 1-MCA-RN-2315 MCSRD-RN-309/sht.2 QAL-14 VT-3 NA 6.000 Rigid Restraint RN MC-ISIN3-1574-01.00' 0.000 Class C F01.030.184A 1-MCA-RN-H953 MCSRD-CAJ/sht.2 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN3-1574-01.00' 0.000 Class C

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report MClass 3 piing Supports McGuire 1 Page 51 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.185A 1-MCA-RN-1322 MCSRD-RN-157/sht.1 QAL-14 VT-3 NA 36.000 Rigid Support RN MC-ISIN3-1574-01.00 0.000 Class C F01.030.207B 1-MCA-RN-2026 MCSRD-RN-301/sht.1 QAL-14 VT-3 NA 18.000 Rigid Restraint RN MC-ISIN3-1574-02.00 0.000 Class C F01.030.211B 1-MCA-RN-2054 MCSRD-RN-302 QAL-14 VT-3 NA 8.000 Rigid Restraint RN MC-ISIN3-1574-02.00 0.000 Class C Total F01.030 Items: 20

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Supports Other Than Piping Supports McGuire 1 Page 52 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.014B NSP-SUPPORT-1A MCM 1201.05-206 QAL-14 VT-3 NA 0.000 CONTAINMENT SPRAY PUMP 1A SUPPORT.

NS MC-ISIN3-1563-01.00 0.000 Class B F01.040.015B 1RCHP-SUPPORT MCM 1201.05-0301 QAL-14 VT-3 NA 0.000 RECIPRICATING CHARGING PUMP SUPPORT.

NV MC-ISIN3-1554-03.00 0.000 Class B F01.040.016B 1CCP-SUPPORT-1A MCM 1201.05-0228 QAL-14 VT-3 NA 0.000 CENTRIFICAL CHARGING PUMP 1A SUPPORT.

NV MC-ISIN3-1554-03.01 0.250 Class B F01.040.019B 1RV-SUPPORT-C MCM 1201.01-78 QAL-14 VT-3 NA 0.000 REACTOR VESSEL SUPPORT (C HOT LEG).

NC MC-ISIN3-1553-01.00 0.000 REFERENCE DRAWING MCM 1201.01-79.

Class A MCM 1117.00-10 F01.040.020B 1RV-SUPPORT-D MCM 1201.01-78 QAL-14 VT-3 NA 0.000 REACTOR VESSEL SUPPORT (D COLD LEG).

NC MC-ISIN3-1553-01.00 0.000 REFERENCE DRAWING MCM 1201.01-79.

Class A MCM 1117.00-10 F01.040.026B KDHX-SUPPORT-1A MCM 1201.06-0042 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR COOLING WATER HEAT RN MC-ISIN3-1574-02.00 0.750 EXCHANGER 1A SUPPORT.

Class C F01.040.027B 1KDC-SUPPORT-1A MCM 1301.00-0050 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR LUBE OIL COOLER 1A KD MC-ISIN3-1609-01.00 0.000 SUPPORT.

Class C F01.040.028B 1KDP-SUPPORT-1A MCM 1301.00-45 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR JACKET WATER PUMP 1A KD MC-ISIN3-1609-01.00 0.000 SUPPORT.

Class C

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Supports Other Than Piping Supports McGuire 1 Page 53

• Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.040.033B 1RNST-SUPPORT-1A MCM 1218.02-8 QAL-14 VT-3 NA 0.000 NUCLEAR SERVICE WATER STRAINER 1A RN MC-ISIN3-1574-01.01 0.500 SUPPORT.

Class C MCM 1218.02-9 Total F01.040 Items: 9 Total F01 Items: 93

EOC20 CI DUKE ENERGY CORPORATION

(

CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MClass 1 and 2 Piping Welds McGuire 1 Page 54 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Elements Subject to Thermal Fatigue ****

R01.011.006 1SGB-OUTLET-W6SE MC1676-4 PDI-UT-10 UT SS-CS 31.000 5149697 STEAM GENERATOR B OUTLET NOZZLE.

Circumferential NC MCM 1201.01-0782 2.500 5158172 DRAWING # MC-ISIN-1553-01.00. SEGMENT Class A Term end MCM 1201.01-0769 Nozzle to NC-006. NDE-12/RT MAY BE SUBSTITUTED IN Dissimilar Safe End LIEU OF PDI-UT-10/UT.

R01.011.016 1NC1F-1493 MCFI-1NC34 NDE-995 UT SS 1.500 TBD SEGMENT NC-025.

Circumferential NC MC-ISIN3-1553-01.00 160 0.281 Class A MC-1676-4.1 Pipe to Sweepolet R01.011.017 1NC1F-1615 MCFI-1NC44 NDE-995 UT SS 1.500 TBD SEGMENTNC-026.

Circumferential NC MC-ISIN3-1553-01.00 160 0.281 Class A MC-1676-4.1 Pipe to Sweepolet R01.011.024 1NC1F1272 MCFI-1NC28 NDE-600 UT SS 2.000

• SEGMENT NC-048.

Circumferential NC MC-ISIN3-1554-03.00 PDI-UT-2 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class A Pipe to REQUIREMENTS.

Reducer R01.011.087 1NI1FW97-1 MCFI-1NI97 NDE-600 UT SS 4.000

• SEGMENTNI-061A.

Circumferential NI MC-ISIN3-1562-01.00 PDI-UT-2 0.531 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Elbow R01.011.088 1Nl1F364 MCFI-1NI75 NDE-600 UT SS 3.000

• SEGMENT NI-062A.

Circumferential NI MC-ISIN3-1562-01.00 PDI-UT-2 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Valve R01.011.137 1NV1F7900 MCFI-1NV144 NDE-600 UT SS 4.000 SEGMENT NV-002B.

Circumferential NV MC-ISIN3-1554-03.01 PDI-UT-2 0.237 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Elbow R01.011.139 1NV29-1 MCFI-1NV185 NDE-600 UT SS 4.000

• SEGMENT NV-011 A.

Circumferential NV MC-ISIN3-1554-03.01 PDI-UT-2 0.531 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Elbow

EOC 20 DUKE ENERGY CORPORATION

(

CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MClass 1 and 2 Piping Welds McGuire 1 Page 55 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS R01.011.153 1NV1F2112 MCFI-1NV63 NDE-600 UT SS 2.000 SEGMENTNV-020AG.

Circumferential NV MC-ISIN3-1554-01.00 PDI-UT-2 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe R01.011.154 1NV1F331 MCFI-1NV5 NDE-600 UT SS 2.000

• SEGMENT NV-0201A.

Circumferential NV MC-ISIN3-1554-01.00 PDI-UT-2 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Reducer R01.011.155 1NV3-3 MCFI-1NV185 NDE-600 UT SS 3.000

• SEGMENTNV-065.

Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Elbow to REQUIREMENTS.

Pipe R01.011.156 1NV1F6223 MCFI-1NV145 NDE-600 UT SS 2.000

• SEGMENT NV-077B.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Pipe R01.011.157 1NV1FW53-51 MCFI-1NV53 NDE-600 UT SS 3.000

• SEGMENT NV-080A.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.438 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Tee R01.011.158 1NV1FW53-27 MCFI-1NV53 NDE-600 UT SS 2.000

• SEGMENT NV-081.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.436 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Valve to REQUIREMENTS.

Pipe R01.011.166 1RCPSS-OUT-1 MCFI-1NV144 NDE-600 UT SS 4.000

• RECIPROCATING CHARGING PUMP SUCTION Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.237 STABILIZER. SEGMENT NV-108A.

Class B Term end MCM 1201.04-0272 Pipe to *SEE SECTION 8 FOR CALIBRATION BLOCK Flange REQUIREMENTS.

R01.011.167 1RCHP-IN MCFI-1NV144 NDE-600 UT SS 4.000

• RECIPROCATING CHARGING PUMP. SEGMENT Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.237 NV-108A.

Class B Term end MCM 1201.05-0301 Flange to *SEE SECTION 8 FOR CALIBRATION BLOCK Pump REQUIREMENTS.

R01.011.203 1RV1F109A MCFI-1RV31 NDE-600 UT CS 12.000

• SEGMENTRV-012.

Circumferential RV MC-ISIN3-1604-03.00 PDI-UT-2 0.375 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe

EOC20 ( (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report MClass and 2 Piping Welds McGuire 1 Page 56 Inservice Inspection Plan for Interval 3 Outage 6 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Total R01.011 Items: 17

• • • • Elements Subject to Corrosive, Erosive, or Cavitation Wastage ****

R01.013.004 1RV1F107 MCFI-1RV31 NDE-946 UT CS 12.000 STEP SEGMENT RV-013.

Circumferential RV MC-ISIN3-1604.03-00 0.375 WEDGE EXAMINE A 1 FT. LENGTH OF PIPE AT WELD TO Class B Pipe to DETERMINE WALL THICKNESS.

Pipe Total R01.013 Items: 1 Total R01 Items: 18

Duke Power Company ISI Plan Management Inservice Inspection Plan For:

McGuire Unit 1 Interval 3 ISI Outage 7 Refueling Outage EOC 21 ISI Inspection Listing Revision 0

EOC 21 ( (

DUKE ENERGY CORPORATION CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report hell Welds McGuire 1 Page 1 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Circumferential ****

B01.011.001 1RPV8-442 MCM 1201.01-146 See Corn UT CS 0.000 See Corn UPPER SHELL PC. 454-01 TO MIDDLE SHELL PC.

Circumferential MCM 1201.01-223 8.600 454-02. PROCEDURE 54-ISI-800. CALIBRATION Class A Shell to BLOCK FTI-RPV-95001.

Shell B01.011.002 1RPV9-442 MCM 1201.01-146 See Com UT CS 0.000 See Com MIDDLE SHELL PC. 454-02 TO LOWER SHELL Circumferential MCM 1201.01-223 8.600 PC. 454-03. PROCEDURE 54-ISI-800.

Class A Shell to CALIBRATION BLOCK FTI-RPV-95001.

Shell B01.011.003 1RPV1O-442 MCM 1201.01-146 SeeCom UT CS 0.000 See Corn LOWER SHELL PC. 454-03 TO LOWER HEAD PC.

Circumferential MCM 1201.01-223 5.300 469-01. PROCEDURE 54-ISI-800. CALIBRATION Class A Shell to BLOCK FTI-RPV-95001.

Head Total B01.011 Items: 3

• • • • Longitudinal ****

B01.012.001 1RPV1-442A MCM 1201.01-146 See Corn UT CS 0.000 See Corn UPPER SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 10.700 APPROXIMATELY 60 DEGREE

S. PROCEDURE

Class A Shell to 54-lSI-800. CALIBRATION BLOCK Shell FTI-RPV-95001.

B01.012.002 1RPV 1-442B MCM 1201.01-146 See Corn UT CS 0.000 See Corn UPPER SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 10.700 APPROXIMATELY 180 DEGREE

S. PROCEDURE

Class A Shell to 54-lS1-800. CALIBRATION BLOCK Shell FTI-RPV-95001.

BO1.012.003 1RPV 1-442C MCM 1201.01-146 See Corn UT CS 0.000 See Corn UPPER SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 10.700 APPROXIMATELY 300 DEGREE

S. PROCEDURE

Class A Shell to 54-lS1-800. CALIBRATION BLOCK Shell FTI-RPV-95001.

B01.012.004 1RPV2-442A MCM 1201.01-146 SeeCorn UT CS 0.000 SeeCorn MIDDLESHELLLONGITUDINALSEAMAT Longitudinal MCM 1201.01-223 8.600 APPROXIMATELY 0 DEGREE

S. PROCEDURE

Class A Shell to 54-lSI-800. CALIBRATION BLOCK Shell FTI-RPV-95001.

B01.012.005 1RPV 2-442B MCM 1201.01-146 See Corn UT CS 0.000 See Corn MIDDLE SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 8.600 APPROXIMATELY 120 DEGREE

S. PROCEDURE

Class A Shell to 54-ISI-800. CALIBRATION BLOCK Shell FTI-RPV-95001.

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report Shell Welds McGuire 1 Page 2 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 N

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B01.012.006 1RPV2-442C MCM 1201.01-146 SeeCom UT CS 0.000 SeeCom MIDDLESHELLLONGITUDINALSEAMAT Longitudinal MCM 1201 .01-223 8.600 APPROXIMATELY 240 DEGREE

S. PROCEDURE

Class A Shell to 54-lSI-800. CALIBRATION BLOCK FTI-RPV-95001.

Shell B01.012.007 1RPV3-442A MCM 1201.01-146 See Corn UT CS 0.000 See Corn LOWER SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 8.600 APPROXIMATELY 60 DEGREE

S. PROCEDURE

Class A Shell to 54-lSI-800. CALIBRATION BLOCK Shell FTI-RPV-95001.

B01.012.008 1RPV3-442B MCM 1201.01-146 See Corn UT CS 0.000 See Corn LOWER SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 8.600 APPROXIMATELY 180 DEGREE

S. PROCEDURE

Class A Shell to 54. ISI800. CALIBRATION BLOCK Shell FTI-RPV-95001.

B01.012.009 1RPV3-442C MCM 1201.01-146 See Com UT CS 0.000 See Corn LOWER SHELL LONGITUDINAL SEAM AT Longitudinal MCM 1201.01-223 8.600 APPROXIMATELY 300 DEGREE

S. PROCEDURE

Class A Shell to 541ISI800. CALIBRATION BLOCK Shell FTI-RPV-95001.

Total B01.012 Items: 9

EOC 21 DUKE ENERGY CORPORATION

(

CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report

.Head Welds McGuire 1 Page 3 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS SO/DWG NUMBERS PROC INSP REQ MAT/SCH DA/THK CAL BLOCKS COMMENTS

• • • • Circumferential B01.021.002 1RPV 4-469 MCM 1201.01-146 See Com UT CS 0.000 See Corn LOWER HEAD RING PC. 469-01 TO LOWER Circumferential MCM 1201.01-223 5.300 HEAD CAP PC. 469-02.

Class A Head Ring to PROCEDURE 54-1S-800.

Head Cap CALIBRATION BLOCK FTI-RPV-95001.

Total B01.021 Items: 1

• • • • Meridional ****

B01.022.006 1RPV 1-202A MCM 1201.01-146 See Corn UT CS 0.000 See Com LOWER HEAD MERIDIONAL WELD AT Longitudinal MCM 1201.01-223 5.300 APPROXIMATELY 30 DEGREE

S. PROCEDURE

Class A Head to 54-ISI-800. CALIBRATION BLOCK Head FTI-RPV-95001.

B01.022.007 1RPV 1-202B MCM 1201.01-146 See Corn UT CS 0.000 See Corn LOWER HEAD MERIDIONAL WELD AT Longitudinal MCM 1201.01-223 5.300 APPROXIMATELY 90 DEGREE

S. PROCEDURE

Class A Head to 54-ISI-800. CALIBRATION BLOCK Head FTI-RPV-95001.

B01.022.008 1RPV 1-202C MCM 1201.01-146 See Com UT CS 0.000 See Com LOWER HEAD MERIDIONAL WELD AT Longitudinal MCM 1201.01-223 5.300 APPROXIMATELY 150 DEGREE

S. PROCEDURE

Class A Head to 54-lSI-800. CALIBRATION BLOCK Head FTI-RPV-95001.

B01.022.009 1RPV 1-202D MCM 1201.01-146 See Com UT CS 0.000 See Com LOWER HEAD MERIDIONAL WELD AT Longitudinal MCM 1201.01-223 5.300 APPROXIMATELY 210 DEGREE

S. PROCEDURE

Class A Head to 54-lS1-800. CALIBRATION BLOCK Head FTI-RPV-95001.

B01.022.010 1RPV 1-202E MCM 1201.01-146 See Com UT CS 0.000 See Com LOWER HEAD MERIDIONAL WELD AT Longitudinal MCM 1201.01-223 5.300 APPROXIMATELY 270 DEGREE

S. PROCEDURE

Class A Head to 54-IS1-800. CALIBRATION BLOCK FTI-RPV-95001.

Head B01.022.011 1RPV1-202F MCM 1201.01-146 See Corn UT CS 0.000 See Com LOWER HEAD MERIDIONAL WELD AT Longitudinal MCM 1201.01-223 5.300 APPROXIMATELY 330 DEGREE

S. PROCEDURE

Class A Head to 54-lSI-800. CALIBRATION BLOCK FTI-RPV-95001.

Head Total B01.022 Items: 6

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Reactor Vessel Inservice Inspection Database Management System Plan Report Shell-to-Flanae Weld McGuire 1 Page 4 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B01.030.002 1RPV 7-442 MCM 1201.01-146 See Corn UT CS 0.000 See Corn NOZZLE BELT PC. 454-01 TO FLANGE PC.

Circumferential MCM 1201.01-223 10.700 442-06.

Class A Nozzle Belt to UT FROM VESSEL ID.

Flange PROCEDURE 54ISI-800.

CALIBRATION BLOCK FTI-RPV-95001.

Total B01.030 Items: 1 Total B01 Items: 20

EOC 21 i (

DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 5 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG aNUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • Nozzle-to-Vessel Welds ****

B03.090.001 1RPV5-445A MCM 1201.01-148 See Corn UT CS 61.500 See Corn REACTOR VESSEL INLET NOZZLE A PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 67 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-ISI-800.

CALIBRATION BLOCK FTI-RPV-95001.

B03.090.001 A 1RPV5-445A MCM 1201.01-148 See Corn UT CS 61.500 50304 REACTOR VESSEL INLET NOZZLE A PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT67 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

B03.090.002 1RPV5-445B MCM 1201.01-148 See Corn UT CS 61.500 See Corn REACTOR VESSEL INLET NOZZLE B PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 113 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-ISI-800.

CALIBRATION BLOCK FTI-RPV-95001.

B03.090.002A 1RPV5-445B MCM 1201.01-148 See Corn UT CS 61.500 50304 REACTOR VESSEL INLET NOZZLE B PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 113 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

B03.090.003 1RPV5-445C MCM 1201.01-148 See Corn UT CS 61.500 See Corn REACTOR VESSEL INLET NOZZLE C PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 247 DEGREES.

Class A MCM 1201 .01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-lSI-800.

CALIBRATION BLOCK FTI-RPV-95001.

B03.090.003A 1 RPV5-445C MCM 1201.01-148 See Corn UT CS 61.500 50304 REACTOR VESSEL INLET NOZZLE C PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 247 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-lSI-106.

B03.090.004 1RPV5-445D MCM 1201.01-148 See Corn UT CS 61.500 See Corn REACTOR VESSEL INLET NOZZLE D PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 293 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-ISI-800.

CALIBRATION BLOCK FTI-RPV-95001.

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 6 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMEBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B03.090.004A 1RPV5-445D MCM 1201.01-14 8 See Corn UT CS 61.500 50304 REACTOR VESSEL INLET NOZZLE D PC. 456-01 Circumferential NC MCM 1201.01-22 3 10.900 TO SHELL PC. 454-01 AT 293 DEGREES.

Class A MCM 1201.01-14 6 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

B03.090.005 1RPV5-445E MCM 1201.01-148 See Corn UT CS 52.900 See Corn REACTOR VESSEL OUTLET NOZZLE E PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 22 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-[SI-800.

CALIBRATION BLOCK FTI-RPV-95001.

B03.090.005A 1RPV5-445E MCM 1201.01-148 See Corn UT CS 52.900 50304 REACTOR VESSEL OUTLET NOZZLE E PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT22 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

B03.090.006 1RPV5-445F MCM 1201.01-148 See Corn UT CS 52.900 See Corn REACTOR VESSEL OUTLET NOZZLE F PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 158 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-1SI-800.

CALIBRATION BLOCK FTI-RPV-95001.

B03.090.006A 1RPV5-445F MCM 1201.01-148 See Corn UT CS 52.900 50304 REACTOR VESSEL OUTLET NOZZLE F PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 158 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

B03.090.007 1RPV5-445G MCM1201.01-148 See Corn UT CS 52.900 See Corn REACTOR VESSEL OUTLET NOZZLE G PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 202 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-ISI-800.

CALIBRATION BLOCK FTI-RPV-95001.

B03.090.007A 1RPV5-445G MCM 1201.01-148 See Corn UT CS 52.900 50304 REACTOR VESSEL OUTLET NOZZLE G PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 202 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

B03.090.008 1RPV5-445H MCM 1201.01-148 See Corn UT CS 52.900 See Corn REACTOR VESSEL OUTLET NOZZLE H PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 338 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM VESSEL ID.

Vessel PROCEDURE 54-ISI-800.

CALIBRATION BLOCK FTI-RPV-95001.

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report WReactor Vessel McGuire 1 Page 7 N Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS _ _ _

B03.090.008A 1RPV5-445H MCM 1201.01-148 See Com UT CS 52.900 50304 REACTOR VESSEL OUTLET NOZZLE H PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 338 DEGREES.

Class A MCM 1201.01-146 Nozzle to UT FROM NOZZLE ID.

Vessel PROCEDURE 54-ISI-106.

Total B03.090 Items: 16

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report Reactor Vessel McGuire 1 Page 8 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle Inside Radius Section ****

B03.100.001 1RPV5-445AR MCM 1201.01-148 TBD VT-1 CS 61.500 REACTOR VESSEL INLET NOZZLE A PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 67 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

B03.100.002 1RPV5-445BR MCM 1201.01-148 TBD VT-1 CS 61.500 REACTOR VESSEL INLET NOZZLE B PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 113 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

B03.100.003 1RPV5-445CR MCM 1201.01-148 TBD VT-1 CS 61.500 REACTOR VESSEL INLET NOZZLE C PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 247 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

B03.100.004 1RPV5-445DR MCM 1201.01-148 TBD VT-1 CS 61.500 REACTOR VESSEL INLET NOZZLE D PC. 456-01 Circumferential NC MCM 1201.01-223 10.900 TO SHELL PC. 454-01 AT 293 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

B03.100.005 1RPV5-445ER MCM 1201.01-148 TBD VT-1 CS 52.900 REACTOR VESSEL OUTLET NOZZLE E PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 22 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

B03.100.006 1RPV5-445FR MCM 1201.01-148 TBD VT-1 CS 52.900 REACTOR VESSEL OUTLET NOZZLE F PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 158 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

B03.100.007 1RPV5-445GR MCM 1201.01-148 TBD VT-1 CS 52.900 REACTOR VESSEL OUTLET NOZZLE G PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 202 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

EOC 21 l DUKE ENERGY CORPORATION CATEGORY B-D, Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report EReactor Vessel McGuire 1 Page 9 E Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B03.100.008 1RPV5-445HR MCM 1201.01-148 TBD VT-1 CS 52.900 REACTOR VESSEL OUTLET NOZZLE H PC.

Circumferential NC MCM 1201.01-223 10.900 456-01 TO SHELL PC. 454-01 AT 338 DEGREES.

Class A MCM 1201.01-146 Nozzle to ENHANCED VISUAL EXAMINATION WILL BE Vessel PERFORMED. REFERENCE CODE CASE N-648-1. (INSIDE RADIUS SECTION)

Total B03.100 Items: 8 Total B03 Items: 24

EOC 21 / l, DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report

.Steam Generators McGuire 1 Page 10 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO)IDWG NUMBERS PROC INSP REQ MAT/SCH DIArTHK CAL BLOCKS COMMENTS

• • • • Bolts and Studs ****

B06.090.003 1SGB-MW-X1-Y1 MCM 1201.01-0747 NDE-2047 UT CS 2.625 7C015 STEAM GENERATOR 1 PRIMARY INLET NC MCM 1201.01-0683 26.625 MANWAY BOLTING. 20 STUDS. X1-Y1 Class A QUADRANT.

B06.090.004 1SGB-MW-X1-Y2 MCM 1201.01-0747 NDE-2047 UT CS 2.625 7C015 STEAM GENERATOR 1B PRIMARY OUTLET NC MCM 1201.01-0683 26.625 MANWAY BOLTING. 20 STUDS. X1-Y2 Class A QUADRANT.

B06.090.005 1SGC-MW-X2-Y1 MCM 1201.01-0747 NDE-2047 UT CS 2.500 7C015 STEAM GENERATOR 1C PRIMARY INLET NC MCM 1201.01-0684 26.625 MANWAY BOLTING. 20 STUDS. X2-Y1 Class A QUADRANT.

B06.090.006 1SGC-MW-X2-Y2 MCM 1201.01-0747 NDE-2047 UT CS 2.500 7C015 STEAM GENERATOR C PRIMARY OUTLET NC MCM 1201.01-0684 26.625 MANWAY BOLTING. 20 STUDS. X2-Y2 Class A QUADRANT.

Total B06.090 Items: 4

/

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining IN!SERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inser 'vice Inspection Database Management System Plan Report WStean Generators McGuire 1 Page 11 U Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Flange Surface, when connection disassembled B06.100.001 1SGA-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.002 1SGA-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1A PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.003 1SGB-MW-XI-Y1 MCM 1201.01-0791 QAL-13 VT-I CS 0.000 STEAM GENERATOR B PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.004 1SGB-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR 1B PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.005 1SGC-MW-X2-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR C PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.006 1SGC-MW-X2-Y2 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR C PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X2-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.007 1SGD-MW-X1-Y1 MCM 1201.01-0791 QAL-13 VT-1 CS 0.000 STEAM GENERATOR D PRIMARY INLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y1 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

B06.100.008 1SGD-MW-X1-Y2 MCM 1201.01-0791 QAL-13 VT- CS 0.000 STEAM GENERATOR 1D PRIMARY OUTLET NC 0.000 MANWAY FLANGE SURFACE. X1-Y2 Class A QUADRANT. INSPECT WHEN CONNECTION DISASSEMBLED.

Total B06.100 Items: 8

EOC 21 i (

DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Steam Generators McGuire 1 Page 12 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO, /DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nuts, Bushings, and Washers ****

B06.110.003 1SGB-MW-X1-Y1 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR 1B PRIMARY INLET NC MCM 1201.01-0683 0.000 MANWAY NUTS. 20 NUTS. X1-Y1 QUADRANT.

Class A B06.110.004 1SGB-MW-X1-Y2 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR 1B PRIMARY OUTLET NC MCM 1201.01-0683 0.000 MANWAY NUTS. 20 NUTS. X1-Y2 QUADRANT.

Class A B06.110.005 1SGC-MW-X2-Y1 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR C PRIMARY INLET NC MCM 1201.01-0684 0.000 MANWAY NUTS. 20 NUTS. X2-Y1 QUADRANT.

Class A B06.110.006 1SGC-MW-X2-Y2 MCM 1201.01-0747 QAL-13 VT-1 CS 2.500 STEAM GENERATOR 1C PRIMARY OUTLET NC MCM 1201.01-0684 0.000 MANWAY NUTS. 20 NUTS. X2-Y2 QUADRANT.

Class A Total B06.110 Items: 4

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 13 Inservice Inspection Plan for Interval 3 Outage 7 12103/2003 ITEM NUMBER ID NUMBER SYS ISO IDWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Flange Surface, when connection disassembled ****

B06.190.001 1RCP-1A-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP AMAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190,002 1RCP-1B-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1B MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.003 1RCP-1C-FLANGE MCM 1201.01-7 QAL-13 VT-i SS 77.000 REACTOR COOLANT PUMP C MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A B06.190.004 1RCP-1 D-FLANGE MCM 1201.01-7 QAL-13 VT-1 SS 77.000 REACTOR COOLANT PUMP 1D MAIN FLANGE.

NC MCM 1201.01-193 10.370 INSPECT WHEN CONNECTION DISASSEMBLED.

Class A Total B06.190 Items: 4 Total B06 Items: 20

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report McGuire 1 Page 14 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO /DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.070.065A1NI-160 MCM 1205.36-0028 QAL-13 VT-1 SS 1.250 6" VALVE, MCFI-1N135. INSPECT ONLY ONE NI MC-ISIN3-1562-03.00 0.000 VALVE IN THIS GROUP (64A-64F) PER INTERVAL Class A (ITEM # 5J-001).

To_t al . 070 It e ms. 1...._ ... ._. __ .

Total 1307.070 Items: 1

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting, 2 in. And Less In Diameter Inservice Inspection Database Management System Plan Report MCRD Housings McGuire 1 Page 15 Inservice Inspection Plan for Interval 3 Outage 7 12103/2003 ITEM NUMBER ID NUMBER SYS ISO !DWG NUMBE .RS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Bolts, Studs, and Nuts ****

B07.080.001 1CRD-HOUSING MCM 1201.01-224 QAL-13 VT-1 SS 0.000 APPLIES TO 53 CRD HOUSINGS. EXAMINE ONLY NC MC-ISIN3-1553-01.00 6.000 CRD BOLTING THAT IS REUSED WHEN r.I,.- - A W"Idbb~ f-RArRA 10n1 IVI%.IVI}d:V.

I An QC 3-OZ0 HOUSING IS REASSEMBLED.

Total B07.080 Items: 1 Total B07 Items: 2

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY B-K, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 16 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW( 3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

B10.010.001 1PZR-SKIRT MCM 1201.01-170 NDE-25 MT CS 87.000 WELDED ATTACHMENT. PRESSURIZER NC MCM 1201.01-0048 1.500 SUPPORT SKIRT TO LOWER HEAD.

Class A MCM 1201.01-140 Support Skirt to Head B10.010.001A1PZR-SKIRT MCM 1201.01-170 NDE-2052 UT CS 87.000 50237B WELDED ATTACHMENT. PRESSURIZER NC MCM 1201.01-0048 1.500 SUPPORT SKIRT TO LOWER HEAD. REQUEST Class A MCM 1201.01-140 Support Skirt to FOR ALTERNATIVE WILL BE SUBMITTED TO Head PERFORM A UT FROM ACCESSIBLE SIDE OF SKIRT IN LIEU OF MT.

Total B10.010 Items: 2 Total B10 Items: 2

EOC 21 II DUKE ENERGY CORPORATION CATEGORY B-L-2, Pump Casings INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 17 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Pump Casing ****

B12.020.001 1RCP-1A MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1A CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.002 1RCP-1B MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1B CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.003 1RCP-1C MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1C CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.020.004 1 RCP-1 D MCM 1201.01-7 QAL-14 VT-3 SS 77.000 REACTOR COOLANT PUMP 1D CASING NC MC-ISIN3-1553-01.00 4.500 INTERNAL SURFACES. ONLY ONE PUMP Class A REQUIRED TO BE EXAMINED THIS INTERVAL.

INSPECT ONLY IF PUMP IS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

Total B12.020 Items: 4

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 18 Inservice Inspection Plan for Interval 3 Outage 7 12103/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Valve Body, Exceeding NPS 4

• B12.050.001A 1NC-1 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0001).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIROR VOLUMETRIC EXAMINATION.

B12.050.001 B 1NC-2 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0002).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIROR VOLUMETRIC EXAMINATION.

B12.050.001C1NC-3 MCM 1205.09-0001 QAL-14 VT-3 SS 6.000 6" CROSBY RELIEF VALVE (ITEM # 1NC-0003).

NC MC-ISIN3-1553-02.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI- 1NC5 1NC-1, 1NC-2, OR 1NC-3 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIROR VOLUMETRIC EXAMINATION.

B12.050.002A 1ND-i B MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B, OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.002B 1ND-2A MCM-1205.00-0010 QAL-14 VT-3 SS 14.000 14" WALWORTH GATE VALVE (ITEM # 4J-001).

ND MC-ISIN3-1561-01.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 ND38 1ND-1 B OR 1ND-2A ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B1 2.050.003A 1NI-54A MCM-1205.00-0012 QAL- 14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-005). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 NI79 VALVES: NI-54A, 1NI-65B, 1NI-76A, OR 1NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

BI 2.050.003B 1N -65B MCM 1205.00-0012 QAL-114 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl80 VALVES: 1N-54A, 1NI-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE,

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 19 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003C1Ni-76A MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 NI87 VALVES: 1NI-54A, 1NI-65B, 1NI-76A, OR NI-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.003D 1N-88B MCM 1205.00-0012 QAL-14 VT-3 SS 10.000 10" CRANE-ALOYCO GATE VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-043). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N186 VALVES: 1N-54A,1 NI-65B, 1N-76A, OR 1N-88B ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004A 1NI-59 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N179 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1Nl-81, 1N-82, 1Nl-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004B 1N -60 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N179 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

I .-

B12.050.004C1NI-70 MC 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N180 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1Nl-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004D 1NI-71 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.00 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl62 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY B-M-2. Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 20 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

-.. . ~ - . . .. --._ _ _ . _ _ .

B12.050.004E NI-81 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N187 VALVES: 1NI-59, 1NI-60, 1NI-70, 1N1-71, NI-81, 1NI-82, 1NI-93, OR I NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004F 1Nl-82 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl87 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1N-93, OR 1N-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004G1N-93 MCM 1205.36-0011 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.01 0.000 4J-055). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl86 VALVES: 1NI-59, 1NI-60, 1NI-70,1 NI-71,1 NI-81, 1NI-82, 1NI-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.004H 1NI-94 MCM 1205.36-0010 QAL-14 VT-3 SS 10.000 10" ATWOOD-MORRILL CHECK VALVE (ITEM #

NI MC-ISIN3-1562-02.01 0.000 4J-054). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N186 VALVES: 1NI-59, 1NI-60, 1NI-70, 1NI-71, 1NI-81, 1NI-82, 1Nl-93, OR 1NI-94 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION.

B12.050.005A 1NI-125 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1NI53 1NI-125, OR 1NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY B-M-2, Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 21 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B12.050.005B 1NI-129 MCM 1205.00-0006 QAL-14 VT-3 SS 8.000 8" ALOYCO CHECK VALVE (ITEM # 4J-010).

NI MC-ISIN3-1562-03.00 0.000 INSPECT ONE OF THE FOLLOWING VALVES:

Class A MCFI-1 N153 1NI-125, OR NI -129 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006A 1NI-126 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1N-134, 1N-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006B 1NI-134 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: INI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.006C-1NI-157 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B1 2.050.006D 1NI-1 75 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1NI53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-M-2. Valve Body INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report McGuire 1 Page 22 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIATHK CAL BLOCKS COMMENTS ______

B1 2.050.006E N-180 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N153 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1N-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B1 2.050.006F i NI-181 MCM 1205.00-0005 QAL-14 VT-3 SS 6.000 6" CRANE-ALOYCO CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 4J-008). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 Nl53 VALVES: 1NI-126, 1NI-134, 1NI-157, 1NI-175, 1NI-180, 1NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007A 1NI-160 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.00 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 N135 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

B12.050.007B 1NI-176 MCM 1205.36-0028 QAL-14 VT-3 SS 6.000 6" WESTINGHOUSE CHECK VALVE (ITEM #

NI MC-ISIN3-1562-03.01 0.000 5J-001). INSPECT ONE OF THE FOLLOWING Class A MCFI-1 NI78 VALVES: 1NI-160, OR 1NI-176 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR OR VOLUMETRIC EXAMINATION.

Total B12.050 Items: 27 Total B12 Items: 31

EOC 21 I (

DUKE ENERGY CORPORATION CATEGORY B-N-1, Interior Of Reactor Vessel INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

.Reactor essel McGuire 1 Page 23 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Vessel Interior ****

B13.010.001 1RPV-INTERIOR MCM 1201.01-146 QAL-14 VT-3 SS 0.000 REACTOR VESSEL INTERIOR. AREAS TO BE NC MC-ISIN3-1553-01.00 0.000 EXAMINED SHALL INCLUDE THE SPACES Class A MCM 1201.01-223 ABOVE AND BELOW THE REACTOR CORE THAT ARE MADE ACCESSIBLE FOR EXAMINATION BY REMOVAL OF COMPONENTS DURING NORMAL REFUELING OUTAGES.

INSPECT ONCE EACH INSPECTION PERIOD.

Total B13.010 Items: 1

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY B-N-2. Welded Core Support INSERVICE INSPECTION PLAN MANAGEMENT Structures And Interior Attachments To RV Inservice Inspection Database Management System Plan Report Reactor Vessel (PWR) McGuire 1 Page 24 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Interior Attachments Beyond Beltline Region ****

B13.060.001 1RPV-CLEVIS MCM 1201.01-0224 OAL-14 VT-3 SS 0.000 6 CLEVIS LOCATED ON THE REACTOR VESSEL NC MC-ISIN3-1553-01.00 0.000 LOWER SHELL AT APPROXIMATELY 60 DEGREE Class A MCM 1201.01-0617 INTERVALS. INTERIOR ATTACHMENTS BEYOND THE BELTLINE REGION.

B13.060.002 1RPV-INCORE MCM 1201.01-0165 QAL-14 VT-3 SS 0.000 58 INCORE INSTURMENTATION NOZZLES NC MC-ISIN3-1553-01.00 0.000 LOCATED ON THE BOTTOM HEAD. INTERIOR Class A ATTACHMENTS BEYOND THE BELTLINE REGION.

Total B13.060 Items: 2

EOC 21 1 DUKE ENERGY CORPORATION CATEGORY B-N-3, Removable Core Support INSERVICE INSPECTION PLAN MANAGEMENT Structures Inservice Inspection Database Management System Plan Report McGuire 1 Page 25 I~eacor Vessel PWR 1210312003 Inservice Inspection Plan for Interval 3 Outage 7 ITEM NUMBER ID NUMBER SYS ISO/DWG NIJMBERS PROC INSP REQ MAT/SCH DIA/`THK CAL BLOCKS COMMENTS

• • • CoreSupport Structure **

B13.070.001 1RPV-CORE-SUP MCM 1201.01-056 QAL-14 VT-3 SS 0.000 REACTOR VESSEL CORE SUPPORT NC MC-1SIN3-1553-01.00 0.000 STRUCTURE. THE STRUCTURE SHALL BE Class A MCM 1201.01-058 REMOVED FROM REACTOR VESSEL FOR EXAMINATION.

Total B13.070 Items: 1 Total B13 Items: 4

EOC 21 i DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report Head Circumferential Welds McGuire 1 Page 26 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NU! v1BERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.020.074 1 REGHX-3-HD1 MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (Shell 3)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Nozzle Belt to Head C01.020.075 1REGHX-3-HD2 MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (Shell 3)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Shell to Head Total C01.020 Items: 2

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY C-A, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pressure Vessels Inservice Inspection Database Management System Plan Report Eubesheet-to-Shell Weld McGuire 1 Page 27 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C01.030.024 1REGHX-3-NB-TS MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (SHELL 3)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Nozzle Belt to Tubesheet C01.030.025 IREGHX-3-TS-SH MCM 1201.06-0015 NDE-3630 UT SS 10.920 50428 REGENERATIVE HEAT EXCHANGER. (SHELL 3)

Circumferential NV MC-ISIN3-1554-01.02 1.075 Class B Tubesheet to Shell Total C01.030 Items: 2 Total C01 Items: 4

EOC 21 DUKE ENERGY CORPORATION CATEGORY C-B, Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels ENozzles Inservice Inspection Database Management System Plan Report Without Reinforcing Plate in Vessels > McGuire 1 Page 28 M1/2 in. Nom. Thickness Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG ,NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Nozzle-to-Shell (Nozzle to Head or Nozzle to Nozzle) Weld ****

C02.021.002 1SGD-W259 MCM 1201.01-0782 NDE-3620 UT CS 6.000 5139385 STEAM GENERATOR 1D AUXILLARY Circumferential SM MC-ISIN3-1591-01.01 4.125 50236A FEEDWATER NOZZLE.

Class B Nozzle to Steam Drum C02.021.002A 1SGD-W259 MCM 1201.01-0782 NDE-25 MT CS 6.000 STEAM GENERATOR 1D AUXILLARY Circumferential SM MC-ISIN3-1591-01.01 4.125 FEEDWATER NOZZLE.

Class B Nozzle to Steam Drum Total C0-.021 Items: 2 Total C02 Items: 2

EOC 21 DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For IN'SERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inser vice Inspection Database Management System Plan Report McGuire 1 Page 29

- ~~~~~~~~~~~~~~~~~~Ins ervice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

C03.020.011 1-MCA-CF-H205 MCSRD-CFC/sht. 12 NDE-25 MT CS 18.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support CF MC-iSIN3-1591-01.01 0.594 F01.020.055A.

Class B 1-MCA-CF-H205

... . I.

C03.020.023 1-MCA-ND-H31 MCSRD-FWA/sht. 6 NDE-35 PT SS 14.000 WELDED ATTACHMENT. INSPECT WITH Spring Hgr ND MC-ISIN3-1561-01.00 0.237 F01.020.178C.

Class B 1-MCA-ND-H31 C03.020.055 1-MCA-NV-H95 MCSRD-NVE/sht. 2 NDE-35 PT SS 4.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support NV MC-ISIN3-1554-02.00 0.125 F01.020.337A.

Class B 1-MCA-NV-H95 C03.020.056 1-MCA-NV-H459 MCSRD-NVD/sht. 1 NDE-35 PT SS 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Restraint NV MC-ISIN3-1554-03.01 0.125 F01.020.344B.

Class B 1-MCA-NV-H459 Total C03.020 Items: 4 Total C03 Items: 4

EOC 21 (I DUKE ENERGY CORPORATION CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report Pressure Vessels McGuire 1 Page 30 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWC NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.010.003 1VGTK-SUPPORT-1A1 MCM 1301.00-80 QAL-13 VT-1 NA 0.000 DIESEL GENERATOR STARTING AIR TANK 1A1 VG MC-ISIN3-1 609-04.00 0.312 WELDED ATTACHMENT.

Class C Total D01.010 Items: 1

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY D-A, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping, Pumps, And Valves Inservice Inspection Database Management System Plan Report McGuire 1 Page 31 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWi 3 NUMBERS PROC INSP REQ MAT/SCH DIAFTHK CAL BLOCKS COMMENTS

• • • • Welded Attachments ****

D01.020.071 1-MCA-RN-H301 MCSRD-RN-315 QAL-13 VT-1 NA 8.000 WELDED ATTACHMENT. INSPECT WITH Rigid Support RN MC-ISIN3-1574-02.00 0.125 F01.030.216A.

Class C 1-MCA-RN-H301 Total D01.020 Items: 1 Total D01 Items: 2

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A! Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 1 Piping Supports McGuire 1 Page 32 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS "A', One-Directional, "B", Multi-Directional, "C", Thermal Movement F01.010.022C 1-MCR-NC-550 MCSRD-NC-03/sht. 1 QAL-14 VT-3 NA 4.000 Spring Hgr NC 0.000 Class A F01.010.023A 1-MCR-NC-885 MCSRD-WL-02/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Support NC 0.000 Class A F01.010.025C 1-MCR-NC-891 MCSRD-WL-02/sht. 1 QAL-14 VT-3 NA 2.000 Mech Snubber NC 0.000 Class A F01.010.056C 1-MCR-ND-514 MCSRD-ND-01/sht. 1 QAL-14 VT-3 NA 14.000 Spring Hgr ND 0.000 Class A Fi01.010.1 19B 1-MCR-NI-730 MCSRD-NI-09/sht 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NI 0.000 Class A

.M .. . _A. .- -. -.. Q4

__. . .. VT-3 N F01.010.120C 1-MCR-NI-733 MCSRD-NI-09/sht. 1 QAL-14 NA 2.000 Hyd Snubber NI 0.000 Class A F01.010.121 C 1-MCR-NI-858 MCSRD-NI-1 6/sht 1 QAL-14 VT-3 NA 1.500 Mech Snubber NI 0.000 Class A F01.010.122C 1-MCR-NI-913 MCSRD-NI-14/sht. 1 QAL-14 VT-3 NA 1.500 Spring Hgr NI 0.000 Class A

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 1 Pipina Supports McGuire 1 Page 33 N Inservice Inspection Plan for Interval 3 Outage 7 12103/2003 ITEM. NUMBER B .ID N NUMBER V...

.MC

...- . . SYS ISO/DWG- NUMBERS.1 . PROC

- 4 INSP REQ

- MAT/SCH

.1 DIA/THK.5. CAL BLOCKS COMMENTS F01.010.155B 1-MCR-NV-859 MCSRD-NV-09/sht. 1 QAL-14 VT-3 NA 1.500 Rigid Restraint NV 0.000 Class A F01.010.156B 1-MCR-NV-895 MCSRD-NV-07/sht. 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NV 0.000 Class A Total F01.010 Items: 10

EOC 21 I DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 2 Pipinq Supports McGuire 1 Page 34 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ***

F01.020.005C 1-MCR-CA-H397 MCSRD-CAN/sht. 1 QAL-14 VT-3 NA 6.000 Spring Hgr CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.013C 1-MCA-CA-H468 MCSRD-CAP/sht. 2 QAL-14 VT-3 NA 6.000 Mech Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.021 C 1-MCA-CA-H434 MCSRD-CAO/sht. 1 QAL-14 VT-3 NA 4.000 Hyd Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.022C 1-MCA-CA-H464 MCSRD-CAP/sht. 2 QAL-14 VT-3 NA 4.000 Mech Snubber CA MC-ISIN3-1592-01.00 0.000 Class B F01.020.055A 1-MCA-CF-H205 MCSRD-CFC/sht. 12 QAL-14 VT-3 NA 18.000 Rigid Support CF MC-ISIN3-1591-01.01 0.594 Class B F01.020.057A 1-MCR-CF-H400 MCSRD-CFC/sht. 12 QAL-14 VT-3 NA 24.000 Rigid Support CF MC-ISIN3-1591-01.01 0.000 Class B F01.020.102C 1-MCA-FW-H10 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Spring Hgr FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.104A 1-MCA-FW-Hl 1 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping Supports McGuire 1 Page 35 12/03/2003 E Inservice Inspection Plan for Interval 3 Outage 7 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.105C1-MCA-FW-H111 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Mech Snubber FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.106A 1-MCA-FW-H127 MCSRD-FWA/sht. 1 OAL-14 VT-3 NA 24.000 Rigid Support FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.112C 1-MCA-FW-H 110 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Hyd Snubber FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.113C 1-MCA-FW-H122 MCSRD-FWA/sht. 6 QAL-14 VT-3 NA 18.000 Hyd Snubber FW MC-ISIN3-1571-01.00 0.000 Class B F01.020.114B 1-MCA-FW-H2 MCSRD-FWA/sht. 1 QAL-14 VT-3 NA 24.000 Rigid Restraint FW MC-ISIN3-1571-01.00 0.750 Class B F01.020.161 A 1-MCA-ND-H79 MCSRD-NDA/sht. 8 QAL-14 VT-3 NA 8.000 Rigid Support ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.175A 1-MCA-ND-H302 MCSRD-NDA/sht. 4 QAL-14 VT-3 NA 8.000 Rigid Support N[D MC-ISIN3-1561-01.00 0.000 Class B F01.020.176C 1-MCA-ND-H304 MCSRD-NDA/sht. 5 QAL-14 VT-3 NA 8.000 Hyd Snubber ND MC-ISIN3-1561-01.00 0.000 Class B F01.020.177A 1-MCA-ND-H330 MCSRD-NDA/sht. 7 QAL-14 VT-3 NA 8.000 Rigid Support ND MC-ISIN3-1561-01.00 0.000 Class B

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A! Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 2 Piping Sulports McGuire 1 Page 36 N Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.020.178C 1-MCA-ND-H31 MCSRD-FWA/sht.6 QAL-14 VT-3 NA 14.000 Spring Hgr ND MC-ISIN3-1561-01.00 0.237 Class B F01.020.229A 1-MCR-N 1-788 MCSRD-N I-09/sht. 3 QAL- 14 VT-3 NA 4.000 Rigid Support NI MC-ISIN3-1562-03.00 0.000 Class B I ---. _- . - ..- ~ --.

..N F01.020.230A 1-MCR-NI-823 MCSRD-N I-08/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Support NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.231B 1-MCR-NI-826 MCSRD-NI-08/sht 1 QAL-14 VT-3 NA 2.000 Rigid Restraint NI MC-ISIN3-1562-03.00 0.000 Class B F01.020.232A 1-MCR-NI-853 MCSRD-NI-15/sht.1 QAL-14 VT-3 NA 3.000 Rigid Support NI MC-ISIN3-1562-01.00 0.000 Class B F01.020.233A 1-MCR-NI-505 MCSRD-NI-01/sht. 1 QAL-14 VT-3 NA 6.000 -- - . ._ .

Rigid Support NI MC-ISIN3-1562-03.01 0.000 Class B

. . . I ..

F01.020.234B 1-MCR-NI-898 MCSRD-NI-13/sht.1 QAL-14 VT-3 NA 3.000 Rigid Restraint NI MC-ISIN3-1562-01.00 0.000 Class B F01.020.274A 1-MCR-NS-659 MCSRD-NS-04/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.275A 1-MCR-NS-679 MCSRD-NS-04/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• CIass 2 Piping Supports McGuire 1 Page 37 N Inservice Inspection Plan for Interval 3 Outage 7 12103/2003 ITEM NUMBER ID NUMBER

--.-- SYS MISO/DWG N NUMBERS

___h. _ PROC INSP

. REQ

..N. MAT/SCH DIA/THK

.00 CAL BLOCKS COMMENTS F01.020.276A 1-MCR-NS-709 MCSRD-NS-05/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.277A 1-MCR-NS-714 MCSRD-NS-05/sht. 2 QAL-14 VT-3 NA 8.000 Rigid Support NS MC-ISIN3-1563-01.00 0.000 Class B F01.020.337A 1-MCA-NV-H95 MCSRD-NVE/sht. 2 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-02.00 0.125 Class B F01.020.338A 1-MCA-NV-H195 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F01.020.339A 1-MCA-NV-H197 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B F0i.020.340A 1-MCA-NV-H274 MC-1190-NV-01-03 QAL-14 VT-3 NA 3.000 Rigid Support NV MC-ISIN3-1554-03.01 0.000 Class B FO .020.341 A 1-MCA-NV-H275 MC-1 190-NV-01 -02 QAL-14 VT-3 NA 4.000 Rigid Support NV MC-ISIN3-1554-02.01 0.000 Class B F0i.020.342C 1-MCA-NV-H433 MCSRD-NVA/sht. 9 QAL-14 VT-3 NA 3.000 Hyd Snubber NV MC-ISIN3-1554-01. 00 0.000 Class B F01.020.343C 1-MCA-NV-H5608 MCSRD-NVD/sht. 2 QAL-14 VT-3 NA 8.000 Mech Snubber NV MC-ISIN3-1554-03.01 0.000 Class B

EOC 21 ( (

DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report CIass 2 Piping SUpports McGuire 1 Page 38

• Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK---- CAL BLOCKS COMMENTS F01.020.344B 1-MCA-NV-H459 MCSRD-NVD/sht. 1 QAL-14 VT-3 NA 8.000 Rigid Restraint NV MC-ISIN3-1554-03.01 0.125 Class B F01.020.552C 1-MCA-SM-H15 MCSRD-SMA/sht. 2 QAL-14 VT-3 NA 42.000 Spring Hgr SM MC-ISIN3-1593-01.00 0.000 Class B F01.020.560A 1-MCA-SM-H109 MCSRD-SMA/sht. 3 QAL-14 VT-3 NA 36.000 Rigid Support SM MC-ISIN3-1593-01.03 0.000 Class B F01.020.561A 1-MCA-SM-H140 MCSRD-SMA/sht. 5 QAL-14 VT-3 NA 36.000 Rigid Support SM MC-ISIN3-1593-01.00 0.000 Class B F01.020.655B 1-MCR-VQ-541 MCSRD-VQ-01/sht. 1 QAL-14 VT-3 NA 6.000 Rigid Restraint VQ MC-ISIN3-1585-01.00 0.000 Class B Total F01.020 Items: 40

EOC 21 l DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Cass 3 Piping Supports McGuire 1 Page 39 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • "A", One-Directional, "B", Multi-Directional, "C", Thermal Movement ****

F01.030.186A 1-MCA-RN-2030 MCSRD-RN-301/sht.1 QAL-14 VT-3 NA 18.000 Rigid Support RN MC-ISIN3-1574-02.00 0.000 Class C F01.030.187A 1-MCA-RN-1343 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 30.000 Rigid Support RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.188A 1-MCA-RN-2039 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 20.000 Rigid Support RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.189A 1-MCA-RN-H978 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 20.000 Rigid Support RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.190A 1-MCA-RN-2023 MCSRD-RN-301/sht.3 QAL-14 VT-3 NA 18.000 Rigid Support RN MC-ISIN3-1574-03.00 0.000 Class C F01.030.191A 1-MCA-RN-2327 MCSRD-RN-301/sht.4 QAL-14 VT-3 NA 20.000 Rigid Support RN MC-ISIN3-1574-03.00 0.000 Class C F01.030.192A 1-MCA-RN-2081 MCSRD-RN-302 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN3-1574-02.00 0.000 Class C F01.030.193A 1-MCA-RN-1075 MCSRD-RN-303/sht.1 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN3-1574-02.00 0.000 Class C

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 3 Piping Supports McGuire 1 Page 40

-- - I- - -

Inservice Inspection Plan for Interval 3 Outage 7 12/U3/2U3 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS-PROC INSP REQ MAT/SCH DIA/THK.-. . .

CAL BLOCKS COMMENTS .. - ------

F01.030.194A 1-MCA-RN-1 560 MCSRD-RN-305/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support RN MC-ISIN3-1574-01.00 0.000 Class C F01.030.195A 1-MCA-RN-2123 MCSRD-RN-306 QAL-14 VT-3 NA 10.000 Rigid Support RN MC-ISIN3-1574-03.00 0.000 Class C F01.030.196A 1-MCA-RN-1314 MCSRD-RN-307/sht.3 QAL-14 VT-3 NA 36.000 Rigid Support RN MC-ISIN3-1574-03.00' 0.000 Class C

~~~~~~~-

F01.030.197A 1-MCA-RN-2341 MCSRD-RN-307/sht.3 OAL-14 VT-3 NA 20.000 Rigid Support RN MC-ISIN3-1574-03.00' 0.000 Class C F01.030.198A 1-MCA-RN-2339 MCSRD-RN-307/sht.2 QAL-14 VT-3 NA 20.000 Rigid Support RN MC-ISIN3-1574-02.01' 0.000 Class C F01.030.199A 1-MCA-RN-H993 MCSRD-RN-307/sht.4 QAL-14 VT-3 NA 36.000 Rigid Support RN MC-ISIN3-1574-03.01' 0.000 Class C F0 .030.200A 1-MCA-RN-1 105 MCSRD-RN-309/sht.1 QAL-14 VT-3 NA 6.000 Rigid Support RN MC-ISIN3-1574-01.00' 0.000 Class C F01.030.201 A 1-MCA-RN-2518 MCSRD-RN-309/sht.3 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN3-1574-01.00 0.000 Class C F01.030.202A 1-MCA-RN-2718 MCSRD-RN-312/sht.2 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN3-1574-02.00 0.000 Class C

EOC 21 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report M ss 3 Piping Supports McGuire 1 Page 41 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.030.203C 1-MCA-RN-2335 MCSRD-RN-307/sht.1 QAL-14 VT-3 NA 20.000 Hyd Snubber RN MC-ISIN3-1574-02.01 0.000 Class C F01.030.204C 1-MCA-RN-2468 MCSRD-RN-307/sht.4 QAL-14 VT-3 NA 36.000 Mech Snubber RN MC-ISIN3-1574-03.01' 0.000 Class C F01.030.205C -MCA-RN-1 302 MCSRD-RN-301/sht.2 QAL-14 VT-3 NA 20.000 Spring Hgr RN MC-ISIN3-1574-01.01 0.000 Class C F01.030.215A 1-MCA-RN-2298 MCSRD-RN-316 QAL-14 VT-3 NA 8.000 Rigid Support RN MC-ISIN3-1574-03.00 0.000 Class C F01.030.216A 1-MCA-RN-H301 MCSRD-RN-315 QAL-14 VT-3 NA 8.000 INSPECT WITH D01 ;020.071.

Rigid Support RN MC-ISIN3-1574-02.00 0.125 Class C Total F01.030 Items: 22

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Supports Other Than Piping Supports McGuire 1 Page 42 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 I

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Class 1, 2, and 3 ****

F01.040.005C 1SGC-LATERALS MC-1070-05.01 QAL-14 VT-3 NA 0.000 STEAM GENERATOR 1C LOWER & UPPER NC MC-ISIN3-1553-01.00 0.000 LATERALS AND SNUBBERS. REFERENCE Class A MC-1 070-1 0.01 DRAWING MCM 1117.03-0055.

F01.040.011B 1SWIF-SUPPORT-1 A MCM 1201.04-0027 QAL-14 VT-3 NA 0.000 SEAL WATER INJECTION FILTER 1A SUPPORT.

NV MC-ISIN3-1554-02.01 0.375 Class B F01.040.029B 1VGTK-SUPPORT-1A1 MCM 1301.00-80 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR STARTING AIR TANK Al VG MC-ISIN3-1609-04.00 0.312 SUPPORT SKIRT.

Class C F01.040.030B 1WNP-SUPPORT-1B2 MCM 1203.04-0074 QAL-14 VT-3 NA 0.000 DIESEL GENERATOR ROOM SUMP PUMP 1B2 WN MC-ISIN3-1609-07.00 0.000 SUPPORT.

Class C F01.040.035B 1CAPTD-SUPPORT MCM 1201.05-218 QAL-14 VT-3 NA 0.000 AUXILIARY FEEDWATER PUMP TURBINE CA MC-ISIN3-1592-01.01 0.000 DRIVEN SUPPORT.

Class C F01.040.042B 1ELDHX-SUPPORT MCM 1201.06-10 QAL-14 VT-3 NA 0.000 EXCESS LETDOWN HEAT EXCHANGER NV MC-ISIN3-1554-01.02 0.375 SUPPORT Class B Total F01.040 Items: 6 Total F01 Items: 78

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY AUG, Augmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report EAumented Examination McGuire 1 Page 43 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DW( 3 NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • • • Pipe Rupture Protection ****

G03.001.001 1NC-72-1 MCFI-1NC-47 NDE-600 UT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.001 A1 NC-72-1 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

G03.001.002 1NC1F-107 MCFI-1NC-47 NDE-600 UT SS 10.000

• AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). 'SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.002A1NC1F-107 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

G03.001.003 1NC-73-1 MCFI-1NC-47 NDE-600 UT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-IStN3-1553-01.00 PDI-UT-2 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257). *SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS.

G03.001.003A1NC-73-1 MCFI-1NC-47 NDE-35 PT SS 10.000 AUGMENTED EXAMINATION.

Circumferential NC MC-ISIN3-1553-01.00 1.000 REFERENCE DOCUMENT SRG-78-001 REV.2 Class A (DISTRIBUTION CODE MADM-257).

Total G03.001 Items: 6 Total G03 Items: 6

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report EClass 1 and 2 Piping Welds McGuire 1 Page 44

• Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Elements Subject to Thermal Fatigue ****

R01.011.001 1RPV3-445E-SE MCM 1201.01-148 See Corn UT SS-CS 29.000 40397 REACTOR VESSEL OUTLET NOZZLE E PC.

Circumferential NC MCM 1201.01-146 2.312 445-06 TO SAFE END PC. 445-07 AT 22 Class A Term end MCM 1201.01-0223 Nozzle to DEGREE

S. PROCEDURE

54-ISI-106. SEGMENT Dissimilar Safe End NC-001.

R01.011.002 1RPV3-445F-SE MCM 1201.01-148 See Coin UT SS-CS 29.000 40397 REACTOR VESSEL OUTLET NOZZLE F PC.

Circumferential NC MCM 1201.01-146 2.312 445-06 TO SAFE END PC. 445-07 AT 158 Class A Term end MCM 1201.01-0223 Nozzle to DEGREE

S. PROCEDURE

54-ISI-106. SEGMENT Dissimilar Safe End NC-002.

R01.011.003 1RPV3-445G-SE MCM 1201.01-148 See Coin UT SS-CS 29.000 40397 REACTOR VESSEL OUTLET NOZZLE G PC.

Circumferential NC MCM 1201.01-146 2.312 445-06 TO SAFE END PC. 445-07 AT 202 Class A Term end MCM 1201.01-0223 Nozzle to DEGREE

S. PROCEDURE

54-ISI-106. SEGMENT Dissimilar Safe End NC-003.

R01.011.004 1RPV3-445H-SE MCM 1201.01-148 See Coin UT SS-CS 29.000 40397 REACTOR VESSEL OUTLET NOZZLE H PC.

Circumferential NC MCM 1201.01-146 2.312 445-06 TO SAFE END PC. 445-07 AT 338 Class A Term end MCM 1201.01-0223 Nozzle to DEGREE

S. PROCEDURE

54-ISI-106. SEGMENT Dissimilar Safe End NC-004.

R01.011.007 1SGC-OUTLET-W6SE MC1676-4 PDI-UT-10 UT SS-CS 31.000 5149697 STEAM GENERATOR 1C OUTLET NOZZLE.

Circumferential NC MCM 1201.01-0782 2.500 5158172 DRAWING # MC-ISIN-1553-01.00. SEGMENT Class A Term end MCM 1201.01-0769 Nozzle to NC-007. NDE-12/RT MAY BE SUBSTITUTED IN Dissimilar Safe End LIEU OF PDI-UT-10/UT.

R01.011.009 1RPV3-445A-SE MCM 1201.01-148 TBD UT SS-CS 27.500 TBD REACTOR VESSEL INLET NOZZLE A PC. 445-02 Circumferential NC MCM 1201.01-146 2.281 TO SAFE END PC. 445-03 AT Class A Term end MCM 1201.01-0223 Nozzle to 67 DEGREES. SEGMENT NC-009.

Dissimilar Safe End R01.011.010 1RPV3-445B-SE MCM 1201.01-148 TBD UT SS-CS 27.500 TBD REACTOR VESSEL INLET NOZZLE B PC. 445-02 Circumferential NC MCM 1201.01-146 2.281 TO SAFE END PC. 445-03 AT Class A Term end MCM 1201.01-0223 Nozzle to 113 DEGREES. SEGMENT NC-010.

Dissimilar Safe End R01.011.011 1RPV3-445C-SE MCM 1201.01-148 TBD UT SS-CS 27.500 TBD REACTOR VESSEL INLET NOZZLE C PC. 445-02 Circumferential NC MCM 1201.01-146 2.281 TO SAFE END PC. 445-03 AT Class A Term end MCM 1201.01-0223 Nozzle to 247 DEGREES. SEGMENT NC-01.

Dissimilar Safe End

EOC 21 DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report

• Class 1 and 2 Piping Welds McGuire 1 Page 45

• Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS R01.011.012 1RPV3-445D-SE MCM 1201.01-148 TBD UT SS-CS 27.500 TBD REACTOR VESSEL INLET NOZZLE D PC. 445-02 Circumferential NC MCM 1201.01-146 2.281 TO SAFE END PC. 445-03 AT Class A Term end MCM 1201.01-0223 Nozzle to 293 DEGREES. SEGMENT NC-012.

Dissimilar Safe End R01.011.143 1NV1FW175-31 MCFI-1NV175 NDE-600 UT SS 2.000

• SEGMENTNV-019AB.

Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Pipe R01.011.149 1NVlFW175-18 MCFI-1NV175 NDE-600 UT SS 2.000

• SEGMENT NV-02OAE.

Circumferential NV MC-ISIN3-1554-03.00 PDI-UT-2 0.344 'SEE SECTION 8 FOR CALIBRATION BLOCK Class B Reducer to REQUIREMENTS.

Pipe R01.011159 1NV1FW53-26 MCFI-INV53 NDE-600 UT SS 2.000

• SEGMENTNV-081.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.436 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Valve to REQUIREMENTS.

Pipe R01.011.160 1NV1FW53-30 MCFI-1NV53 NDE-600 UT SS 2.000 SEGMENT NV-082.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.436 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Valve to REQUIREMENTS.

Pipe R01.011.161 NV1FW53-33 MCFi-1NV53 NDE-600 UT SS 2.000 SEGMENTNV-082.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.436 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Valve to REQUIREMENTS.

Pipe R01.011.162 1NV1FW53-40 MCFI-1NV53 NDE-600 UT SS 2.000

• SEGMENT NV-083.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.436 *SEESECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe R01.011.163 1NV1FW53-41 MCFI-1NV53 NDE-600 UT SS 2.000

• SEGMENTNV-083.

Circumferential NV MC-ISIN3-1554-01.02 PDI-UT-2 0.344 *SEE SECTION 8 FOR CALIBRATION BLOCK Class B Pipe to REQUIREMENTS.

Pipe RO1.011.224 1WL1F3062 MCFI-1WL84 NDE-12 RT SS 6.000 SEGMENT WL-01OA.

Circumferential WL MC-ISIN3-1565-07.00 0.134 Class B Pipe to Elbow

EOC 21 (

DUKE ENERGY CORPORATION CATEGORY R-A, Risk Informed Piping INSERVICE INSPECTION PLAN MANAGEMENT Examinations Inservice Inspection Database Management System Plan Report

• Class 1 and 2 Piping Welds McGuire 1 Page 46 Inservice Inspection Plan for Interval 3 Outage 7 12/03/2003 ITEM NUMBER ID NUMBER SYS ISO /DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Total R01.011 Items: 17 Total R01 Items: 17

McGuire Unit 1 Inservice Inspection Reference Drawings Section 2 Revision 0 Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 1 of 7

ISI NDE Boundary Drawings - Unit 1 The following is a list of ISI NDE boundary drawings used as the basis for the second and third inspection periods for the McGuire Unit 1 Third Interval Inservice Inspection Plan. These drawings are color-coded in accordance with Section 2 of the General Requirements.

These ISI NDE boundary drawings are stored electronically and can be found in the Nuclear Electronic Document Library (NEDL). ISI NDE boundary drawings are revised in accordance with QA-513, Appendix A, Paragraph 3.1.g. (QA-513 is located in section 3.3 of the ISI Functional Area Manual).

System Drawing No. Revision' Class 1 Class 2 Class 3 Reactor Coolant System (NC) MC-ISIN3-1553-01.00 0 X X Reactor Coolant System (NC) MC-IS N3-1553-02.00 0 x X Reactor Coolant System (NC) MC-ISIN3-1553-02.01 0 x X Reactor Coolant System (NC) MC-ISI N3-1553-04.00 0 x Chemical & Volume Control MC-ISIN3-1554-01.00 0 x x System (NV)

Chemical & Volume Control MC-ISIN3-1554-01.01 0 x x System (NV)

Chemical & Volume Control MC-ISN3-1554-01.02 0 x x System (NV)

Chemical & Volume Control MC-ISIN3-1554-01.03 0 x System (NV)

Chemical & Volume Control MC-ISIN3-1554-02.00 0 X X System (NV)

Chemical & Volume Control MC-ISIN3-1554-02.01 0 X System (NV)

Chemical & Volume Control MC-ISIN3-1554-03.00 0 X System (NV)

Chemical & Volume Control MC-ISIN3-1554-03.01 0 X X System (NV)

Chemical & Volume Control MC-ISIN3-1554-04.00 0 X X System (NV)

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 2 of 7

System Drawing No. Revision' Class I Class2 Class3 Chemical & Volume Control MC-ISIN3-1554-05.00 0 x x System (NV)

Boron Thermal Regeneration MC-ISIN3-1555-01.00 0 x x System (NR)

Boron Thermal Regeneration MC-ISIN3-1555-02.00 0 x System (NR)

Boron Recycle System (NB) MC-ISIN3-1556-01.00 0 x Boron Recycle System (NB) MC-ISIN3-1556-01.01 0 x x Boron Recycle System (NB) MC-ISIN3-1556-02.00 0 x Boron Recycle System (NB) MC-ISIN3-1556-02.01 0 x Boron Recycle System (NB) MC-ISIN3-1556-03.00 0 x Containment Air Return System MC-ISIN3-1557-01.00 0 x (VX)

Ice Condenser Refrigeration MC-ISIN3-1558-04.00 0 x System (NF)

Residual Heat Removal System MC-ISI N3-1561 -01 .00 x x (ND)

Safety Injection System (NI) MC-ISIN3-1562-01.00 x x Safety Injection System (NI) MC-ISIN3-1562-02.00 x x Safety Injection System (NI) MC-ISIN3-1562-02.01 x x Safety Injection System (NI) MC-ISIN3-1562-03.00 x x Safety Injection System (NI) MC-ISIN3-1562-03.01 x x Safety Injection System (NI) MC-ISIN3-1562-04.00 x Containment Spray System (NS) MC-ISIN3-1563-01.00 x Annulus Ventilation System (VE) MC-ISIN3-1564-01.00 x Liquid Waste Recycle System MC-ISIN3-1565-01.00 x (WL)

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 3 of 7

System Drawing No. Revision' Class 1 Class 2 Class 3 Liquid Waste Recycle System MC-ISIN3-1565-01.01 0 x x (WL) iquid Waste Recycle System MC-ISIN3-1565-02.00 0 x (WL)

Liquid Waste Recycle System MC-ISIN3-1565-02.01 0 x (WL)

Liquid Waste Recycle System MC-ISIN3-1565-06.00 0 x (WL)

Liquid Waste Recycle System MC-ISIN3-1565-07.00 0 x (WL)

Nuclear Solid Waste Disposal MC-ISIN3-1566-01.00 0 x System (WS)

Waste Gas System (WG) MC-ISIN3-1567-01.00 x x Waste Gas System (WG) MC-ISIN3-1567-02.00 x Waste Gas System (WG) MC-ISIN3-1567-02.01 x x Waste Gas System (WG) MC-ISIN3-1567-03.00 x Waste Gas System (WG) MC-ISIN3-1567-03.01 x Waste Gas System (WG) MC-ISIN3-1567-04.00 x Spent Fuel Cooling System (KF) MC-ISIN3-1570-01.00 x Spent Fuel Cooling System (KF) MC-ISIN3-1570-01.01 x Refueling Water System (FW) MC-ISIN3-1571-01.00 x x Nuclear Sampling System (NM) MC-ISIN3-1572-01.00 x Nuclear Sampling System (NM) MC-ISIN3-1572-01.01 x x Nuclear Sampling System (NM) MC-ISIN3-1572-02.00 x Nuclear Sampling System (NM) MC-ISIN3-1572-03.00 x Component Cooling System MC-ISIN3-1573-01.00 x (KC)

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 4 of 7

System Drawing No. Revision 1 Class 1 Class 2 Class 3 Component Cooling System MC-ISIN3-1573-01.01 0 x (KC)

Component Cooling System MC-ISIN3-1573-02.00 0 x (KC)

Component Cooling System MC-ISIN3-1573-02.01 0 x (KC)

Component Cooling System MC-ISIN3-1573-02.02 0 x (KC)

Component Cooling System MC-ISIN3-1573-03.00 0 x x (KC)

Component Cooling System MC-ISIN3-1573-03.01 0 x x (KC)

Component Cooling System MC-ISIN3-1573-04.00 0 x x (KC)

Nuclear Service Water System MC-ISIN3-1574-01.00 1 x (RN)

Nuclear Service Water System MC-ISIN3-1574-01.01 0 x (RN)

Nuclear Service Water System MC-ISIN3-1574-02.00 0 x (RN)

Nuclear Service Water System MC-ISIN3-1574-02.01 0 x (RN)

Nuclear Service Water System MC-ISIN3-1574-03.00 0 x (RN)

Nuclear Service Water System MC-ISIN3-1574-03.01 0 x (RN)

Nuclear Service Water System MC-ISIN3-1574-04.00 0 x x (RN)

Containment Purge Ventilation MC-ISIN3-1576-01.00 0 x System (VP)

Steam Generator Blowdown MC-ISIN3-1580-01.00 0 x System (BB)

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 5 of 7

System Drawing No. Revision' Class 1 Class 2 Class 3 Groundwater Drainage System MC-ISIN3-1581-01.00 0 X (WZ)

Steam Generator Wet Layup MC-ISIN3-1584-01.00 0 X Recirculation System (BW)

Contain Air Release System MC-ISIN3-1585-01.00 0 X (VQ)

Feedwater System (CF) MC-ISIN3-1591-01.01 0 x Auxiliary Feedwater System (CA) MC-ISIN3-1592-01.00 0 x x Auxiliary Feedwater System (CA) MC-ISIN3-1592-01.01 0 x Main Steam & Main Steam Vent MC-ISIN3-1593-01.00 0 x to Atmos (SM-SV)

Main Steam Supply to Auxiliary MC-ISIN3-1 593-01.02 0 x x Equipment (SA)

Main Steam & Main Steam Vent MC-ISIN3-1593-01.03 0 x to Atmos (SM-SV)

Fire Protection System (RF) MC-ISIN3-1599-02.02 0 x Filtered Water System (YM) MC-ISIN3-1601-02.04 0 x Nitrogen System (GN) MC-ISIN3-1602-01.02 0 x Containment Ventilation Cooling MC-ISIN3-1604-03.00 0 x x Water (RV)

Instrument Air System (VI) MC-ISIN3-1605-01.02 0 x Instrument Air System (VI) MC-ISIN3-1605-01.03 0 x Instrument Air System (VI) MC-ISIN3-1605-01.13 0 x x Instrument Air System (VI) MC-ISIN3-1605-01.14 0 x Instrument Air System (VI) MC-ISIN3-1605-01.17 0 x Instrument Air System (VS) MC-ISIN3-1 605-02.02 0 x Instrument Air System (VB) MC-ISIN3-1605-03.01 0 x Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 6 of 7

System Drawing No. Revision' Class 1 Class 2 Class 3 Diesel Engine Cooling Water MC-ISIN3-1609-01.00 0 X System (KD)

Diesel Engine Cooling Water MC-ISIN3-1609-01.01 0 X System (KD)

Diesel Engine Lube Oil System MC-ISIN3-1609-02.00 0 X (LD)

Diesel Engine Lube Oil System MC-ISIN3-1609-02.01 0 X (LD)

Diesel Engine Starting Air MC-ISIN3-1609-03.00 0 X System (FD)

Diesel Engine Starting Air MC-ISIN3-1609-03.01 0 X System (FD)

Starting Air System (VG) MC-ISIN3-1609-04.00 0 X X Diesel Engine Room Sump MC-ISIN3-1609-07.00 0 X Pump (WN)

Conventional Chemical Additon MC-ISIN3-1617-01.00 0 X System (YA)

Control Area Chilled Water (YC) MC-ISIN3-1618-01.00 0 X Control Area Chilled Water (YC) MC-ISIN3-1618-02.00 0 X Control Area Chilled Water (YC) MC-ISIN3-1618-04.00 0 X 1 The ISI NDE boundary drawing revision number provides a baseline for the SI plan development. The revision numbers listed will not be updated as each SI NDE boundary drawing is revised.

Inservice Inspection Plan Section 2 McGuire Nuclear Station Revision 0 Unit 1 Page 7 of 7