ML18101B031

Proposed Tech Specs,Modifying Spec 3/4.8.1.2 Electrical Power Sources - Shutdown

ML18101B031
Person / Time
Site:	Salem
Issue date:	09/28/1995
From:	Public Service Enterprise Group
To:
Shared Package
ML18101B030	List: ML18101B029 ML18101B031
References
NUDOCS 9510050124
Download: ML18101B031 (6)

Text

ELECTRICAL POWER SYSTEMS SHUTDOWN LIMITING CONDITION FOR OPERATION 3.8.1.2 As a minimum, the following A.C. electrical power sources shall be OPERABLE:

a. One circuit between the offsite transmission network and the onsite Class lE distribution system (vital bus system) , and

b. Two separate and independent diesel generators with:

l. Separate day tanks containing a minimum volume of 130 gallons of fuel, and

2. A common fuel storage system containing a minimum volume of 23,000 gallons of fuel, and

3. A fuel transfer pump.

APPLICABILITY: MODES S and 6.

ACTION:

With less than the above minimum required A.C. electrical power sources OPERABLE, suspend all operations involving CORE ALTERATIONS or positive reactivity changes until the minimum required A.C. electrical power sources are restored to OPERABLE status.

SURVEILLANCE REQUIREMENTS

==n==m=~z===zss~sc~z:==z===*s========~====*=z==~==================

f AJ j ~I(. T I 4.8.1.2 The above required A.C. electrical power sources shall be demonstrated OPERABLE by .the performance of each of the Surveillance Requirements of 4.8.1.1.l, 4.8.l.l.2, 4.8.1.l.3 (except for requirement 4.8.l.l.3.a.2) and 4.8.1.1.4.

3/4 8-Sc Amendment No.170 SALEM - UNIT l

,---

9510050124 950928 PDR ADDCK 05000272 P PDR

3/4.8 ELECTRIC,POWER SYSTEMS BASES 3/4.8.1 and 3/4.8.2 A.c. SOURCES AND ONSITE POWER DISTRIBUTION SYSTEMS The OPERABILITY of the A.c. and D.C power sources and associated dist:.ribu~ion systems during operation ensures that sufficient power will be available to supply the safety related equipment required for l) the safe shutdown of the facility, and 2) the mitigation and control of accident conditions within the facility. The minimum specified independent and redundant A.C. and D.C. power sources and distribution systems satisfy the requirements of General Design Criterion 17 of Appendix "A" to 10 CFR Part SO.

The ACTION requirements specified for the levels of degradation of the power sources provide restriction upon continued facility operation commensurate with the level of degradation. The OPERABILITY of the power sources are consistent with the initial condition assumptions of the accident analyses and are based upon maintaining at least two independent sets of onsite A.C. and D.C. power* sources and associated distribution system*

OPERABLE during accident conditions coincident with an assumed losa of cffaite power and single failure cf one onsite A.C. source.

The OPERABILITY of the minimum specified A.C. and D.C. power sources and aaaociated distribution systems during shutdown and refueling ensures that l) the facility can be maintained in the shutdown or refueling condition for extended time periods and 2) sufficient instrumentation and control capability is available for monitoring and maintaining the unit status.

The Surveillance Requirements for demonstrating the OPERABILITY of the diesel generators are based upon the recommendations cf Regulatory Guide 1.9, "Selection of Diesel Generator Set Capacity for St~ndby Power Supplies,"

March 10, 1971, and Regulatory Guide 1.108, "Periodic Testing of Diesel Generator Unite Used as Oneite Electric Power Systems at Nuclear Power Plants," Revision 1, August 1977.

For the purposes of establishing initial conditions for surveillance testing, "ambient conditions" mean that the diesel lube oil temperature is 120 +/- 20 degrees F. The minimum lube oil temperature for an OPERABLE diesel is 100 degrees F. Lube oil heaters are designed to maintain the oil temperature at approximately 120 degrees F.

r*tJ st:12.1 z.. 3/4.8.3

>ELECTRICAL EQUIPMENT PROTECTIVE DEVICES Containment electrical penetrations and penetration conductors are protected by either deenergizing circuits not required during reactor operation or by demonstrating the OPERABILITY cf primary and backup overcurrent protection circuit breakers during periodic surveillance.

The surveillance frequency applicable to molded case circuit breakers and lower voltage circuit breakers provides assurance of breaker reliability by testing at least one representative sample cf each manufacturer's brand of molded case and lower voltage circuit breakers. Each manufacturer's molded SALEM - UNIT 1 B 3/4 8-1 Amendment No. 148

ELECTRICAL POWER SYSTEM$

LIMITING CONDITION FOR OPERATION 3.B.1.2 As a minimum, the following A.C. electrical power sources shall be OPERABLE:

a. One circuit between the offsite transmission network and the onsite Class lE distribution system (vital bus system) , and

b. Two separate and independent diesel generators with:

1. Separate day tanks containing a minimum volume of 130 gallons of fuel, and

2. A common fuel storage system containing a minimum volume of 23,000 gallons of fuel, and

3. A fuel transfer pump.

APPLICABILITY: MODES S and 6.

ACTION:

With less than the above minimum required A.C. electrical power sources OPERABLE, suspend all operations involving CORE ALTERATIONS or positive reactivity changes until the minimum required A.C. electrical power sources are restored to OPERABLE status.

SURVEILLANCE REQUIREMENTS

(*-------

4.8.1.2 The above required A.C. electrical power sources shall be demonstrated OPERABLE by the performance of each of the Surveillance Requirements of 4.8.1.1.1, 4.B.1.1.2, 4.B.1.1.3 (except for requirement 4.8.1.1.3.a.2) and 4.B.1.1.4.

3/4 B-7a Amendment No. 152 SALEM - UNIT 2

3/4.8 ELECTRIC~.WER SYSTEMS BAsES 3/4.S.l NfP 3/4.8.2 a.c. SOURCES AND ONSITE POWER DISTRIBUTION SYSTEMS Th* OPERABILITY of th* A.C. and D.C power source* and a**ociated di*tri.butiqn *y*tem* durinq operation *n*ures that auff icient power will be available to *upply the *afety r*lated equifC!l*nt r*quired for l) the safe

• hutdown of the facility, and 2) the mitigation and control of accident condition* within the facility. Th* minimum *pecif ied independent and r*dundant A.C. and D.C. power aource* and di*tribution *Y*tems satisfy the r*quirementa of Gen*ral D*eiqn Crit*rion 17 of Appendix "A" to 10 CFR Part so.

Th* ACTION requiremente specif i*d for the levels of degradation of the power .sources provide r**triction upon continued facility operation coamen*urate with the l*v*l of deqradation. Th* OPERABILITY of the power

• ourc** are consiat*nt with the initial condition as*umptiona of the accident analy*** and ar* ba**d upon maintaining at l*a*t two independ*nt *eta of onaite A.C. and D.C. power source* and a**ociated di*tribution *y*tem*

OPERABLE during accident condition* coincident with an a**umed lo** of offsite pow*r and aingl* failure of one on*it* A.C. aourc*.

Th* OPERABILITY of the minimum specified A.C. and o.c. power *ourcea and auaociated distribution *y*t*m* during *hutdown and r*fu*ling enaurea that l) the facility can be maintained in the *hutdown or refu*ling condition for extended time period*, and 2) *ufficient in*trumentation and control capability i* available for monitoring and maintaining th* unit status.

The Surveillance Requirement* for demon*trating th* OPERABILITY of the diesel generator* are baaed upon the recommendation& of Regulatory Guide 1.9, "Selection of Diesel Generator Set Capacity for Standby Power Supplies,"

March 10, 1971, and Regulatory Guide 1.108, "Periodic Testing of Diesel Generator Unite Used a* On*it* Electric Power Systems at Nuclear Power Plant*," Revieion 1, Augu*t 1977.

For the purpo*** of e*tablishing initial condition* for surveillance teeting, "ambient conditions" mean that the diesel lube oil temperature ie 120 + 20 degree* F. The minimum lube oil temperature for an OPERABLE diesel is 100 degr. .

• F. Lube oil heatere are deeigned to maintain the oil temperature at approximately 120 degree* F.

JDS~ ((..1 l.. --?>

314. 8. 3 .JI,BCTBICAL EQUIPMENT PROTECTIVE PEVICES Containment *lectrical penetrations and penetration conductors are protected by either de*nergizing circuit* not required during reactor operation or by demon*trating the OPERABILITY of primary and backup overcurrent protection circuit breaker* during periodic surveillance.

The surveillance frequency applicable to molded case circuit breakers and lower voltage circuit breakers provide* assurance of breaker reliability by testing at least one representative sample of each manufacturer's brand of molded case and lower voltage circuit breakers. Each manufacturer's molded SALEM - UNIT 2 B 3/4 8-1 Amendment No. 126

• LR-N95151 LCR 95-23 ATTACHMENT 3

• LR-N95151 LCR 95-23 ATTACHMENT 3 SURVEILLANCE CROSS REFERENCE NUREG 1431 SALEM DESCRIPTION SR 3.8.1.1 4.8.1.1.1.a Breaker Alignment SR 3.8.1.2 4.8.1.1.2.a.2 DG Start SR 3.8.1.3 One Hour Run SR 3.8.1.7 SR 3.8.1.4 4. 8 .1.1. 3. a.1 Day Tank Level SR 3.8.1.5 4.8.1.1.2.b Day Tank Water Accumulation SR 3.8.1.6 4.8.1.1.3.a.2 Fuel Oil Transfer SR 3.8.1.7 4.8.1.1.2.c Six month DG run SR 3.8.1.8 4.8.1.1.1.b Transfer of AC Power Sources SR 3.8.1.9 4.8.1.1.2.d.2 Load Rejection SR 3.8.1.10 SR 3. 8 .1.11 4.8.1.1.2.d.3 Loss of Offsite power SR 3.8.1.12 4.8.1.1.2.d.4 ESF Start SR 3. 8 .1.13 4.8.1.1.2.d.6 DG Auto Trip Bypass SR 3. 8 .1.16 & ESF/LOOP Start SR 3. 8 .1.19 SR 3.8.1.14 4.8.1.1.2.d.7 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> Endurance Run SR 3. 8 .1.15 4.8.1.1.2.f Hot Restart Test SR 3.8.1.17 4.8.1.1.2.d.9 ESF Override SR 3.8.1.20 4.8.1.1.2.e Simultaneous Start SR 3. 8 .1.18 NA at Salem SEC Timing None 4.8.1.1.2.d.1 DG Inspection 4.8.1.1.2.d.8 Max Load Verification