|
|
| Line 17: |
Line 17: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:Attachment IIMarkedUpCopyofR.E.GinnaNuclearPowerPlantTechnical Specifications Instructions: | | {{#Wiki_filter:Attachment II Marked Up Copy of R.E.Ginna Nuclear Power Plant Technical Specifications Instructions: |
| Removepages3.3-18and3.3-19andreplacewiththeattachedpages.l'PbOb0b0149 9b0b03PDRADQCK05000244pPDR ORTSInstrumentation 3.3.1Table3.3.1-1(page5of6)ReactorTripSystemInstrumentation Note1:OvertemeraturesTTheOvertemperature aTFunctionTripSetpointisdefinedby:1+r,sOvertemperature hTdhT~K,+K~(P-P')-K(T"T')-f(hI)1+t'~sWhere:aTismeasuredRCSaT,F.aToistheindicated zTatRTP,F.sistheLaplacetransform
| | Remove pages 3.3-18 and 3.3-19 and replace with the attached pages.l'PbOb0b0149 9b0b03 PDR ADQCK 05000244 p PDR O RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 5 of 6)Reactor Trip System Instrumentation Note 1: Overtem erature sT The Overtemperature aT Function Trip Setpoint is defined by: 1+r,s Overtemperature h T dh T~K,+K~(P-P')-K (T"T')-f(h I)1+t'~s Where: aT is measured RCS aT, F.aTo is the indicated zT at RTP, F.s is the Laplace transform operator, sec'T is the measured RCS average temperature, F.T is the nominal T., at RTP, F.P is the measured pressurizer pressure, psig.P is the nominal RCS operating pressure, psig.K, is the Overtemperature aT reactor trip setpoint, 1.20.K~is the Overtemperature aT reactor trip depressurization setpoint penalty coeffi ci ent, 0.000900~t/~Ps'. |
| : operator, sec'TisthemeasuredRCSaveragetemperature, F.TisthenominalT.,atRTP,F.Pisthemeasuredpressurizer
| | K, is the Overtemperature zT reactor trip heatup setpoint penalty ceei'i'i cient, 0.0209~g r, is the measured lead/lag time constant, 25 seconds.e r, is the measured lead/lag time constant, 5 seconds.f(aI)'s.a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and q, are the percent power in the top and bottom halves of the core, respectively, and q,+g is the total THERMAL POWER in percent RTP.t$b f(/II)=0 when q,-qb is 8+13'i RTP f(E I)=1.3 ((q,-q)-13j when q,-q, is>+13%RTP R.E.Ginna Nuclear Power Plant 3.3-18 Amendment No.61 RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 6 of 6)Reactor Trip System Instrumentation Note 2: Over ower zT The Overpower aT Function Trip Setpoint is defined by: w~sT Overpower h T 8a T K,-K~(T"T')-Kz-f(h 1)res+1 Where: aT is measured RCS zT, F.aTO is the indicated aT at RTP, F.s.is the Laplace transform operator, sec'T is the measured RCS average temperature,'F.T is the nominal T,, at RTP, F.(/'s f(aI)is a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and qare the percent power in the top and bottom halves of the core, respectively, and q,+q, is the total THERMAL POWER in percent RTP.C f(a,I)=0 when q,-q, is+13%RTP'f(aI)=1.3 I (q,-q,)-13I when q,-qb is>+13%RTP K4 is the Overpower bT reactor trip setpoint, 1.077.Ks is the Overpower zT reactor trip heatup setpoint penalty coefficient which is: 0.0 for T<T~and;0.0011 for T~K6 is t e Overpower aT reactor trip thermal time delay setpoint penalty~~~which is:/ap.026 f'r increasing T and;0.0 for decreasing T.r, is the measured lead/lag time constant, 10 seconds.R.E.Ginna Nuclear Power Plant 3.3-19 Amendment No.61 Attachment III Proposed Technical Specifications Instructions: |
| : pressure, psig.PisthenominalRCSoperating
| | Remove pages 3.3-18 and 3.3-19 and replace with the attached pages. |
| : pressure, psig.K,istheOvertemperature aTreactortripsetpoint, 1.20.K~istheOvertemperature aTreactortripdepressurization setpointpenaltycoefficient,0.000900~t/~Ps'.
| | e RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 5 of 6)Reactor Trip System Instrumentation Note 1: Overtem erature aT The Overtemperature aT Function Trip Setpoint is defined by: 1+r,s Overtenperature h T Sh T K+K (P-P')-K (T-T')'f(h I)0 1 2 1+rs 2 Where: aT is measured RCS aT,'F.aTo is the indicated aT at RTP, F.s is the Laplace transform operator, sec'T is the measured RCS average temperature, F.T is the nominal T,, at RTP,'F.P is the measured pressurizer pressure, psig.P is the nominal RCS operating pressure, psig.K, is the Overtemperature aT reactor trip setpoint, 1.20.K2 is the Overtemperature aT reactor trip depressurization setpoint penalty coefficient, 0.000900/psi. |
| K,istheOvertemperature zTreactortripheatupsetpointpenaltyceei'i'icient,0.0209~gr,isthemeasuredlead/lagtimeconstant, 25seconds.er,isthemeasuredlead/lagtimeconstant, 5seconds.f(aI)'s.afunctionoftheindicated difference betweenthetopandbottomdetectors ofthePowerRangeNeutronFluxchannelswhereq,andq,arethepercentpowerinthetopandbottomhalvesofthecore,respectively, andq,+gisthetotalTHERMALPOWERinpercentRTP.t$bf(/II)=0whenq,-qbis8+13'iRTPf(EI)=1.3((q,-q)-13jwhenq,-q,is>+13%RTPR.E.GinnaNuclearPowerPlant3.3-18Amendment No.61 RTSInstrumentation 3.3.1Table3.3.1-1(page6of6)ReactorTripSystemInstrumentation Note2:OverowerzTTheOverpower aTFunctionTripSetpointisdefinedby:w~sTOverpower hT8aTK,-K~(T"T')-Kz-f(h1)res+1Where:aTismeasuredRCSzT,F.aTOistheindicated aTatRTP,F.s.istheLaplacetransform | | Ks is the Overtemperature aT reactor trip heatup setpoint penalty coefficient, 0.0209/F.r, is the measured lead/lag time constant, 25 seconds.r, is the measured lead/lag time constant, 5 seconds.f(aI)is a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and q, are the percent power in the top and bottom halves of the core, respectively, and q,+q, is the total THERMAL POWER in percent RTP.f(61)=0 f(BI)1.3 ((q,-q)-13}when q,-q, is z+13%RTP when q,-q, is>+13%RTP R.E.Ginna Nuclear Power Plant 3.3-18 Amendment No.g i RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 6 of 6)Reactor Trip System Instrumentation Note 2: Over ower aT The Overpower aT Function Trip Setpoint is defined by: r>sT Overpower h T 6h To K,-Ks(T-T')-K, s-f(hi)'3'here: aT is measured RCS sT, F.aTo is the indicated aT at RTP,'F.s is the Laplace transform operator, sec'T is the measured RCS average temperature, F.T is the nominal T., at RTP,'F.K4 is the Overpower sT reactor K~is the Overpower sT reactor 0.0/'F for T<T and;0.0011/'F for T z T.K, is the Overpower aT reactor which is: 0.0262/'F for increasing T 0.00/'F for decreasing T.trip setpoint, 1.077.trip heatup setpoint penalty coefficient which is: trip thermal time delay setpoint penalty andt f3 is the measured lead/lag time constant, 10 seconds.f(aI)is a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and q, are the percent power in the top and bottom halves of the core, respectively, and q,+q, is the total THERMAL POWER in percent RTP.f(zI)=0 f(LI)=1.3 ((q,-qb)-13)when q,-qb is~+13%RTP when q,-q, is>+13%RTP R.E.Ginna Nuclear Power Plant 3.3-19 Amendment No.g 0 0 t ll I l 4%5l+$p*" Iy}} |
| : operator, sec'TisthemeasuredRCSaveragetemperature,
| |
| 'F.TisthenominalT,,atRTP,F.(/'sf(aI)isafunctionoftheindicated difference betweenthetopandbottomdetectors ofthePowerRangeNeutronFluxchannelswhereq,andqarethepercentpowerinthetopandbottomhalvesofthecore,respectively, andq,+q,isthetotalTHERMALPOWERinpercentRTP.Cf(a,I)=0whenq,-q,is+13%RTP'f(aI)=1.3I(q,-q,)-13Iwhenq,-qbis>+13%RTPK4istheOverpower bTreactortripsetpoint, 1.077.KsistheOverpower zTreactortripheatupsetpointpenaltycoefficient whichis:0.0forT<T~and;0.0011forT~K6isteOverpower aTreactortripthermaltimedelaysetpointpenalty~~~whichis:/ap.026f'rincreasing Tand;0.0fordecreasing T.r,isthemeasuredlead/lagtimeconstant, 10seconds.R.E.GinnaNuclearPowerPlant3.3-19Amendment No.61 Attachment IIIProposedTechnical Specifications Instructions: | |
| Removepages3.3-18and3.3-19andreplacewiththeattachedpages.
| |
| eRTSInstrumentation 3.3.1Table3.3.1-1(page5of6)ReactorTripSystemInstrumentation Note1:OvertemeratureaTTheOvertemperature aTFunctionTripSetpointisdefinedby:1+r,sOvertenperature hTShTK+K(P-P')-K(T-T')'f(hI)0121+rs2Where:aTismeasuredRCSaT,'F.aToistheindicated aTatRTP,F.sistheLaplacetransform
| |
| : operator, sec'TisthemeasuredRCSaveragetemperature, F.TisthenominalT,,atRTP,'F.Pisthemeasuredpressurizer
| |
| : pressure, psig.PisthenominalRCSoperating
| |
| : pressure, psig.K,istheOvertemperature aTreactortripsetpoint, 1.20.K2istheOvertemperature aTreactortripdepressurization setpointpenaltycoefficient, 0.000900/psi.
| |
| KsistheOvertemperature aTreactortripheatupsetpointpenaltycoefficient, 0.0209/F.r,isthemeasuredlead/lagtimeconstant, 25seconds.r,isthemeasuredlead/lagtimeconstant, 5seconds.f(aI)isafunctionoftheindicated difference betweenthetopandbottomdetectors ofthePowerRangeNeutronFluxchannelswhereq,andq,arethepercentpowerinthetopandbottomhalvesofthecore,respectively, andq,+q,isthetotalTHERMALPOWERinpercentRTP.f(61)=0f(BI)1.3((q,-q)-13}whenq,-q,isz+13%RTPwhenq,-q,is>+13%RTPR.E.GinnaNuclearPowerPlant3.3-18Amendment No.g iRTSInstrumentation 3.3.1Table3.3.1-1(page6of6)ReactorTripSystemInstrumentation Note2:OveroweraTTheOverpower aTFunctionTripSetpointisdefinedby:r>sTOverpower hT6hToK,-Ks(T-T')
| |
| -K,s-f(hi)'3'here:aTismeasuredRCSsT,F.aToistheindicated aTatRTP,'F.sistheLaplacetransform | |
| : operator, sec'TisthemeasuredRCSaveragetemperature, F.TisthenominalT.,atRTP,'F.K4istheOverpower sTreactorK~istheOverpower sTreactor0.0/'FforT<Tand;0.0011/'F forTzT.K,istheOverpower aTreactorwhichis:0.0262/'F forincreasing T0.00/'Ffordecreasing T.tripsetpoint, 1.077.tripheatupsetpointpenaltycoefficient whichis:tripthermaltimedelaysetpointpenaltyandtf3isthemeasuredlead/lagtimeconstant, 10seconds.f(aI)isafunctionoftheindicated difference betweenthetopandbottomdetectors ofthePowerRangeNeutronFluxchannelswhereq,andq,arethepercentpowerinthetopandbottomhalvesofthecore,respectively, andq,+q,isthetotalTHERMALPOWERinpercentRTP.f(zI)=0f(LI)=1.3((q,-qb)-13)whenq,-qbis~+13%RTPwhenq,-q,is>+13%RTPR.E.GinnaNuclearPowerPlant3.3-19Amendment No.g 00tllIl4%5l+$p*"Iy}}
| |
Similar Documents at Ginna |
|---|
Category:TECHNICAL SPECIFICATIONS
MONTHYEARML17250B3061999-10-20020 October 1999
Proposed Tech Specs,Consisting of 1999 Changes to TS Bases
ML17265A6941999-06-28028 June 1999
Proposed Tech Specs,Revising ITS Associated with RCS Leakage Detection Instrumentation,As Result of Commitment Submitted as Part of Staff Review of Application of leak-before-break Status to Protions of RHR Piping
ML17265A5911999-03-0101 March 1999
Proposed Tech Specs Change Revising Battery Cell Parameters Limit for Specific Gravity (SR 3.8.6.3 & SR 3.8.6.6)
ML17265A4661998-11-24024 November 1998
Proposed Tech Specs 4.2.1,revising Description of Fuel Cladding Matl & Updating List of References Provided in TS 5.6.5 for COLR
ML17265A3151998-06-0404 June 1998
Proposed Tech Specs Basis Re Main Steam Isolation Setpoint
ML17265A2941998-05-21021 May 1998
Tech Specs Consisting of Submittal Changes for 1998
ML17265A2461998-04-27027 April 1998
Proposed Tech Specs Revising Requirements Associated W/Sfp to Reflect Planned Mod to Storage Racks & Temporarily Addressing Boraflex Degradation within Pool
ML17264B0671997-10-0808 October 1997
Proposed Tech Specs,Correcting & Clarifying Info Re RCS Pressure & Temp Limits Rept Administrative Controls Requirements
ML17264B0441997-09-29029 September 1997
Proposed Tech Specs Revising Adminstrative Controls W/ Respect to Reactor Coolant Sys Pressure & Temp Limits Rept
ML17264B0391997-09-29029 September 1997
Proposed Tech Specs Revising Allowable Value & Trip Setpoint for High Steam Flow Input Into LCO Table 3.3.2-1,Function 4d (Main Steam Isolation) to Address Issues Identified in Rev Revised Setpoint Analysis Study
ML17264A9991997-08-19019 August 1997
Proposed Tech Specs Correcting Specified Accumulator Borated Water Volume Values in SR 3.5.1.2 to Match Associated Accumulator Percent Level Values
ML17264B0031997-08-19019 August 1997
Proposed Tech Specs Allowing Testing of Three ECCS motor- Operated Valves in Mode 4 Which Currently Requires Entry Into LCO 3.0.3
ML17264A9241997-06-0303 June 1997
Proposed Tech Specs Clarifying Issues Re Low Temperature Overpressure Protection
ML17264A8671997-04-24024 April 1997
Proposed Tech Specs,Revising Rcs,Pt & Administrative Control Requirements
ML17264A8491997-03-31031 March 1997
Proposed Tech Specs 3.7.12 Re Spent Fuel Pool Boron Concentration
ML17264A7601996-12-16016 December 1996
Proposed Annual TS Bases
ML17264A7131996-10-29029 October 1996
Proposed Tech Specs Re Actions for Inoperable Channels Associated with Auxiliary Feedwater Pump
ML17264A6001996-09-13013 September 1996
Proposed Tech Specs Re RCS Pressure & Temp Limits Rept
ML17264A5301996-06-0303 June 1996
Proposed Tech Specs Re Update to Correction of Typographical Error Request
ML17264A5111996-05-29029 May 1996
Proposed Tech Specs Pages 3.3-18 & 3.3-19,reflecting Revs to LCO 3.3.1
ML17264A4711996-05-0808 May 1996
Proposed Tech Specs,Correcting Typos
ML17264A4081996-03-20020 March 1996
Proposed Tech Specs 3.9.3,Containment Penetrations Re Use of Roll Up Door & Associated Encl Building for LCO 3.9.3 Requirements
ML17264A4051996-03-15015 March 1996
Proposed Tech Specs Changing Section 5.6.6 Page 5.0-22 to Incorporate Methodology for Determining RCS P/T & LTOP Limits Into Administrative Controls Section for RCS P/T Limits Rept
ML17264A3451996-02-0909 February 1996
Proposed Tech Specs,Revising Setpoints for SG Water Level High Feedwater Isolation Function
ML17264A3401996-02-0909 February 1996
Proposed Tech Specs Re LTOP Limits Using Util Proposed Methodology
ML17264A3341996-02-0909 February 1996
Proposed Tech Specs Containment Requirements During Mode 6 Cost Beneficial Licensing Action
ML17264A3231996-01-26026 January 1996
Proposed Tech Specs Re Nuclear Fuel Cycle for NRC Approval
ML17264A2811995-12-0808 December 1995
Proposed Tech Specs Re Changes to Current RCS Pressure & Temp Limits for Heatup,Cooldown,Criticality & Hydrostatic Testing
ML17264A2531995-11-27027 November 1995
Proposed Tech Specs for Implementation of 10CFR50,App J, Option B
ML17264A2571995-11-20020 November 1995
Proposed Tech Specs,Discussing Changes to TS Instrumentation Requirements & Conversion to Improved TS
ML17264A2491995-11-20020 November 1995
Proposed Tech Specs Re Ventilation Filter Testing Program
ML17264A1511995-08-31031 August 1995
Proposed Tech Specs Implementing WCAP-10271,its Assoc Suppls & Other Re Changes W/Respect to RTS & ESFAS
ML17263A9781995-03-13013 March 1995
Proposed Tech Specs to Revise TS 4.4.2.4.a,replacing Specific Leakage Testing Frequencies for Containment Isolation Valves
ML17263A7901994-09-27027 September 1994
Proposed TS Section 6.0, Administrative Controls.
ML17263A7281994-07-15015 July 1994
Proposed Tech Specs Providing NRC W/Opportunity to Communicate at Early Stage Any Concerns W/Respect to Differences from NUREG-1431
ML17263A6581994-05-23023 May 1994
Proposed Tech Specs,Increasing Allowable Reactor Coolant Activity Levels
ML17263A6431994-05-13013 May 1994
Proposed Tech Specs Administrative Section 6.0
ML17263A3701993-08-20020 August 1993
Corrected Proposed TS Page 5.1-1,changing Word Released to Leased
ML17263A3571993-08-0606 August 1993
Proposed Tech Specs Re Alternative Requirements for Snubber Visual Insp Intervals
ML17263A3191993-07-15015 July 1993
Proposed Tech Specs,Removing Containment Isolation Valve Table 3.6-1 from TS
ML17263A2101993-04-0505 April 1993
Proposed TS Table 3.6-1, Containment Isolation Valves.
ML17262B1191992-12-17017 December 1992
Proposed Tech Specs Sections 3.2 & 3.3 Re Acid Storage Tank Boron Concentration Reduction Study
ML17309A5021992-11-30030 November 1992
Proposed Tech Specs Reflecting Removal of Table of Containment Isolation Valves
ML17262B0441992-10-0808 October 1992
Proposed TS 3.7.1 Re Auxiliary Electrical Sys
ML17262B0211992-09-15015 September 1992
Proposed Tech Specs Sections 3.1.1.4,3.1.1.6 & 4.3.4, Addressing GL 90-06, Resolution of Generic Issue 70, 'Porv & Block Valve Reliability' & Generic Issues 94, 'Addl LTOP for Lwrs.'
ML17262A9141992-06-22022 June 1992
Proposed TS 4.3.1 Re Reactor Vessel Matl Surveillance Testing
ML17262A8321992-04-23023 April 1992
Proposed Tech Specs Re Snubber Visual Insp Schedule
ML17262A8221992-04-21021 April 1992
Proposed Tech Specs Re Fire Protection Program
ML17262A7871992-03-23023 March 1992
Proposed Tech Spec Revising Section 6.5.1 Re Plant Operations Review Committee Function
ML17262A7911992-03-20020 March 1992
Proposed Tech Specs Revising 6.9.1.2 & 6.9.2.5
1999-06-28
[Table view]
Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML17250B3061999-10-20020 October 1999
Proposed Tech Specs,Consisting of 1999 Changes to TS Bases
ML17265A6941999-06-28028 June 1999
Proposed Tech Specs,Revising ITS Associated with RCS Leakage Detection Instrumentation,As Result of Commitment Submitted as Part of Staff Review of Application of leak-before-break Status to Protions of RHR Piping
ML17265A6401999-05-12012 May 1999
Rev 11 to Technical Requirements Manual for Ginna Station.
ML17265A6261999-04-18018 April 1999
Rev 10 to Technical Requirements Manual (Trm), for Ginna Station
ML17311A0701999-04-14014 April 1999
Rev 10 to AP-PRZR.1, Abnormal Pressurizer Pressure.
ML17309A6521999-04-14014 April 1999
Rev 14 to AP-RCS.1, Reactor Coolant Leak.
ML17309A6531999-04-13013 April 1999
Rev 1 to FIG-2.0, Figure Sdm. with 990413 Ltr
ML17265A6111999-03-26026 March 1999
Rev 9 to Technical Requirements Manual for Ginna Station.
ML17265A5911999-03-0101 March 1999
Proposed Tech Specs Change Revising Battery Cell Parameters Limit for Specific Gravity (SR 3.8.6.3 & SR 3.8.6.6)
ML17265A5571999-02-25025 February 1999
Rev 4 to Technical Requirements Manual (Trm).
ML17265A5491999-02-12012 February 1999
to EOP FR-H.5, Response to SG Low Level.
ML17265A5481999-02-12012 February 1999
to EOP ATT-22.0, Attachment Restoring Feed Flow.
ML17265A5461999-02-12012 February 1999
0 to EOP AP-TURB.1, Turbine Trip Without Rx Trip Required.
ML17309A6481999-01-25025 January 1999
Revised Ginna Station Emergency Operating Procedures. with 990125 Ltr
ML17265A5151999-01-14014 January 1999
Revised Emergency Operating Procedures,Including Rev 14 to AP-SW.1,rev 3 to ATT-5.2,rev 5 to ATT-8.0,rev 1 to ATT-14.6, Rev 17 to E-1,rev 16 to ECA-1.1,rev 26 to ES-1.3,rev 4 to FR-Z.2 & Index
ML17265A5081999-01-0808 January 1999
Rev 7 to Technical Requirements Manual, for Ginna Station
ML17265A4961998-12-18018 December 1998
Rev 6 to Technical Requirements Manual.
ML20198C0361998-12-14014 December 1998
Rev 11 to ECA-0.2, Loss of All AC Power Recovery with SI Required
ML20198C0121998-12-14014 December 1998
Rev 10 to AP-RCS.2, Loss of Reactor Coolant Flow
ML20198C0581998-12-14014 December 1998
Rev 5 to FR-Z.1, Response to High Containment Pressure
ML20198C0411998-12-14014 December 1998
Rev 16 to FR-C.1, Response to Inadequate Core Cooling
ML20198C0521998-12-14014 December 1998
Rev 13 to FR-S.1, Response to Reactor Restart/Atws
ML17265A4661998-11-24024 November 1998
Proposed Tech Specs 4.2.1,revising Description of Fuel Cladding Matl & Updating List of References Provided in TS 5.6.5 for COLR
ML20155G0301998-10-30030 October 1998
Rev 13 to EOP AP-CCW.1, Leakage Into Component Cooling Loop
ML17265A4091998-08-24024 August 1998
Rev 13 to AP-SW.1, Svc Water Leak. W/980824 Ltr
ML17265A3721998-07-16016 July 1998
Rev 14 to EOP AP-CW.1, Loss of Circ Water Pump. W/980716 Ltr
ML17265A3151998-06-0404 June 1998
Proposed Tech Specs Basis Re Main Steam Isolation Setpoint
ML17265A2941998-05-21021 May 1998
Tech Specs Consisting of Submittal Changes for 1998
ML17265A2861998-05-0606 May 1998
Rev 19 to EOP ECA-3.2, SGTR W/Loss of Reactor Coolant Saturated Recovery Desired & Updated ECA Index.W/980506 Ltr
ML17265A2461998-04-27027 April 1998
Proposed Tech Specs Revising Requirements Associated W/Sfp to Reflect Planned Mod to Storage Racks & Temporarily Addressing Boraflex Degradation within Pool
ML17265A1821998-02-20020 February 1998
Rev 1 to EWR 5111, MOV Qualification Program Plan, Calculation Assumption Verification Criteria.
ML17265A1491997-12-31031 December 1997
Rev 1 to Inservice Testing Program.
ML17264B0731997-10-14014 October 1997
Rev 4 to Technical Requirements Manual (TRM) for Ginna Station.
ML17264B0671997-10-0808 October 1997
Proposed Tech Specs,Correcting & Clarifying Info Re RCS Pressure & Temp Limits Rept Administrative Controls Requirements
ML17264B0441997-09-29029 September 1997
Proposed Tech Specs Revising Adminstrative Controls W/ Respect to Reactor Coolant Sys Pressure & Temp Limits Rept
ML17264B0391997-09-29029 September 1997
Proposed Tech Specs Revising Allowable Value & Trip Setpoint for High Steam Flow Input Into LCO Table 3.3.2-1,Function 4d (Main Steam Isolation) to Address Issues Identified in Rev Revised Setpoint Analysis Study
ML17265A1541997-09-16016 September 1997
Rev 1 to DA EE-92-089-21, Design Analysis Ginna Station Instrument Loop Performance Evaluation & Setpoint Verification.
ML17264B0031997-08-19019 August 1997
Proposed Tech Specs Allowing Testing of Three ECCS motor- Operated Valves in Mode 4 Which Currently Requires Entry Into LCO 3.0.3
ML17264A9991997-08-19019 August 1997
Proposed Tech Specs Correcting Specified Accumulator Borated Water Volume Values in SR 3.5.1.2 to Match Associated Accumulator Percent Level Values
ML17264A9791997-08-0505 August 1997
Rev 7 to AP-RCS.3, High Reactor Coolant Activity.
ML17264A9781997-08-0505 August 1997
Rev 12 to AP-RCS.1, Reactor Coolant Leak.
ML17264A9771997-08-0505 August 1997
Rev 11 to AP-RCP.1, RCP Seal Malfunction.
ML17264A9751997-08-0505 August 1997
Rev 14 to AP-ELEC.1, Loss of 12A & 12B Busses.
ML17264A9851997-08-0404 August 1997
Rev 2 to Summary Description of Compliance w/10CFR73 Amend Protection Against Malevolent Use of Vehicles at Nuclear Power Plants.
ML17264A9391997-07-0707 July 1997
Rev 3 to Technical Requirements Manual for Ginna Station, Inserting New Tabs Accordingly Per Previous Transmittal for Rev
ML17264A9341997-07-0101 July 1997
to Technical Requirements Manual (TRM) & inter-office Correspondence Dtd 970624
ML17264A9461997-06-20020 June 1997
to Inservice Insp (ISI) Program.
ML17264A9241997-06-0303 June 1997
Proposed Tech Specs Clarifying Issues Re Low Temperature Overpressure Protection
ML17311A0471997-05-22022 May 1997
Revised Eops,Including Procedures Index,Rev 5 to ATT-15.0, Rev 3 to ATT-15.2,rev 3 to AP-ELEC.3,rev 13 to ECA-0.1 & Rev 9 to ECA-0.2.W/970522 Ltr
ML17264A8671997-04-24024 April 1997
Proposed Tech Specs,Revising Rcs,Pt & Administrative Control Requirements
1999-06-28
[Table view] |
Text
Attachment II Marked Up Copy of R.E.Ginna Nuclear Power Plant Technical Specifications Instructions:
Remove pages 3.3-18 and 3.3-19 and replace with the attached pages.l'PbOb0b0149 9b0b03 PDR ADQCK 05000244 p PDR O RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 5 of 6)Reactor Trip System Instrumentation Note 1: Overtem erature sT The Overtemperature aT Function Trip Setpoint is defined by: 1+r,s Overtemperature h T dh T~K,+K~(P-P')-K (T"T')-f(h I)1+t'~s Where: aT is measured RCS aT, F.aTo is the indicated zT at RTP, F.s is the Laplace transform operator, sec'T is the measured RCS average temperature, F.T is the nominal T., at RTP, F.P is the measured pressurizer pressure, psig.P is the nominal RCS operating pressure, psig.K, is the Overtemperature aT reactor trip setpoint, 1.20.K~is the Overtemperature aT reactor trip depressurization setpoint penalty coeffi ci ent, 0.000900~t/~Ps'.
K, is the Overtemperature zT reactor trip heatup setpoint penalty ceei'i'i cient, 0.0209~g r, is the measured lead/lag time constant, 25 seconds.e r, is the measured lead/lag time constant, 5 seconds.f(aI)'s.a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and q, are the percent power in the top and bottom halves of the core, respectively, and q,+g is the total THERMAL POWER in percent RTP.t$b f(/II)=0 when q,-qb is 8+13'i RTP f(E I)=1.3 ((q,-q)-13j when q,-q, is>+13%RTP R.E.Ginna Nuclear Power Plant 3.3-18 Amendment No.61 RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 6 of 6)Reactor Trip System Instrumentation Note 2: Over ower zT The Overpower aT Function Trip Setpoint is defined by: w~sT Overpower h T 8a T K,-K~(T"T')-Kz-f(h 1)res+1 Where: aT is measured RCS zT, F.aTO is the indicated aT at RTP, F.s.is the Laplace transform operator, sec'T is the measured RCS average temperature,'F.T is the nominal T,, at RTP, F.(/'s f(aI)is a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and qare the percent power in the top and bottom halves of the core, respectively, and q,+q, is the total THERMAL POWER in percent RTP.C f(a,I)=0 when q,-q, is+13%RTP'f(aI)=1.3 I (q,-q,)-13I when q,-qb is>+13%RTP K4 is the Overpower bT reactor trip setpoint, 1.077.Ks is the Overpower zT reactor trip heatup setpoint penalty coefficient which is: 0.0 for T<T~and;0.0011 for T~K6 is t e Overpower aT reactor trip thermal time delay setpoint penalty~~~which is:/ap.026 f'r increasing T and;0.0 for decreasing T.r, is the measured lead/lag time constant, 10 seconds.R.E.Ginna Nuclear Power Plant 3.3-19 Amendment No.61 Attachment III Proposed Technical Specifications Instructions:
Remove pages 3.3-18 and 3.3-19 and replace with the attached pages.
e RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 5 of 6)Reactor Trip System Instrumentation Note 1: Overtem erature aT The Overtemperature aT Function Trip Setpoint is defined by: 1+r,s Overtenperature h T Sh T K+K (P-P')-K (T-T')'f(h I)0 1 2 1+rs 2 Where: aT is measured RCS aT,'F.aTo is the indicated aT at RTP, F.s is the Laplace transform operator, sec'T is the measured RCS average temperature, F.T is the nominal T,, at RTP,'F.P is the measured pressurizer pressure, psig.P is the nominal RCS operating pressure, psig.K, is the Overtemperature aT reactor trip setpoint, 1.20.K2 is the Overtemperature aT reactor trip depressurization setpoint penalty coefficient, 0.000900/psi.
Ks is the Overtemperature aT reactor trip heatup setpoint penalty coefficient, 0.0209/F.r, is the measured lead/lag time constant, 25 seconds.r, is the measured lead/lag time constant, 5 seconds.f(aI)is a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and q, are the percent power in the top and bottom halves of the core, respectively, and q,+q, is the total THERMAL POWER in percent RTP.f(61)=0 f(BI)1.3 ((q,-q)-13}when q,-q, is z+13%RTP when q,-q, is>+13%RTP R.E.Ginna Nuclear Power Plant 3.3-18 Amendment No.g i RTS Instrumentation 3.3.1 Table 3.3.1-1 (page 6 of 6)Reactor Trip System Instrumentation Note 2: Over ower aT The Overpower aT Function Trip Setpoint is defined by: r>sT Overpower h T 6h To K,-Ks(T-T')-K, s-f(hi)'3'here: aT is measured RCS sT, F.aTo is the indicated aT at RTP,'F.s is the Laplace transform operator, sec'T is the measured RCS average temperature, F.T is the nominal T., at RTP,'F.K4 is the Overpower sT reactor K~is the Overpower sT reactor 0.0/'F for T<T and;0.0011/'F for T z T.K, is the Overpower aT reactor which is: 0.0262/'F for increasing T 0.00/'F for decreasing T.trip setpoint, 1.077.trip heatup setpoint penalty coefficient which is: trip thermal time delay setpoint penalty andt f3 is the measured lead/lag time constant, 10 seconds.f(aI)is a function of the indicated difference between the top and bottom detectors of the Power Range Neutron Flux channels where q, and q, are the percent power in the top and bottom halves of the core, respectively, and q,+q, is the total THERMAL POWER in percent RTP.f(zI)=0 f(LI)=1.3 ((q,-qb)-13)when q,-qb is~+13%RTP when q,-q, is>+13%RTP R.E.Ginna Nuclear Power Plant 3.3-19 Amendment No.g 0 0 t ll I l 4%5l+$p*" Iy
