ML11294A331: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:1 Davis-BesseNPEm Resource From: CuadradoDeJesus, Samuel Sent: Tuesday, October 11, 2011 10:13 AM To: dorts@firstenergycorp.com Cc: Davis-BesseHearingFile Resource
{{#Wiki_filter:Davis-BesseNPEm Resource From:                         CuadradoDeJesus, Samuel Sent:                         Tuesday, October 11, 2011 10:13 AM To:                           dorts@firstenergycorp.com Cc:                           Davis-BesseHearingFile Resource


==Subject:==
==Subject:==
FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Attachments:
FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Attachments:                   L-11-292 Amd 19 & RAIs B-9, OINs, Telecons_2011-10-07.pdf Got it. Thanks From: dorts@firstenergycorp.com [mailto:dorts@firstenergycorp.com]
L-11-292 Amd 19 & RAIs B-9, OINs, Telecons_2011-10-07.pdf Got it. Thanks From: dorts@firstenergycorp.com
[mailto:dorts@firstenergycorp.com]
Sent: Friday, October 07, 2011 12:48 PM To: CuadradoDeJesus, Samuel Cc: custerc@firstenergycorp.com
Sent: Friday, October 07, 2011 12:48 PM To: CuadradoDeJesus, Samuel Cc: custerc@firstenergycorp.com


==Subject:==
==Subject:==
FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Sam..... attached is FENOC Letter L-11-292 signed today (Octobe r 7, 2011), providing Davis-Besse License Renewal RAI Responses.
FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Sam..... attached is FENOC Letter L-11-292 signed today (October 7, 2011), providing Davis-Besse License Renewal RAI Responses.
Please contact Cliff Custer (724-682-7139) or me with questions regarding the attached.
Please contact Cliff Custer (724-682-7139) or me with questions regarding the attached.
_____ Steve Dort DBNPS License Renewal 419.321.7662 work 412.974.3369 cell
_____
  ------------------
Steve Dort DBNPS License Renewal 419.321.7662 work 412.974.3369 cell
----------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intende d recipient, you are hereby notif ied that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.
----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.
Hearing Identifier: Davis_BesseLicenseRenewal_Saf_NonPublic Email Number: 1831   Mail Envelope Properties   (377CB97DD54F0F4FAAC7E9FD88BCA6D0806D3ECBF0)
1
 
Hearing Identifier:     Davis_BesseLicenseRenewal_Saf_NonPublic Email Number:           1831 Mail Envelope Properties     (377CB97DD54F0F4FAAC7E9FD88BCA6D0806D3ECBF0)


==Subject:==
==Subject:==
FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Sent Date:   10/11/2011 10:13:01 AM Received Date: 10/11/2011 10:13:08 AM From:   CuadradoDeJesus, Samuel Created By:   Samuel.CuadradoDeJesus@nrc.gov Recipients:     "Davis-BesseHearingFile Resource" <Davis-BesseHearingFile.Resource@nrc.gov> Tracking Status: None "dorts@firstenergycorp.com" <dorts@firstenergycorp.com> Tracking Status: None Post Office:   HQCLSTR01.nrc.gov
FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Sent Date:             10/11/2011 10:13:01 AM Received Date:         10/11/2011 10:13:08 AM From:                   CuadradoDeJesus, Samuel Created By:             Samuel.CuadradoDeJesus@nrc.gov Recipients:
"Davis-BesseHearingFile Resource" <Davis-BesseHearingFile.Resource@nrc.gov>
Tracking Status: None "dorts@firstenergycorp.com" <dorts@firstenergycorp.com>
Tracking Status: None Post Office:           HQCLSTR01.nrc.gov Files                          Size                    Date & Time MESSAGE                        1167                    10/11/2011 10:13:08 AM L-11-292 Amd 19 & RAIs B-9, OINs, Telecons_2011-10-07.pdf                  1337683 Options Priority:                      Standard Return Notification:          No Reply Requested:              No Sensitivity:                  Normal Expiration Date:
Recipients Received:


Files    Size      Date & Time MESSAGE    1167      10/11/2011 10:13:08 AM  L-11-292 Amd 19 & RAIs B-9, OINs, Telecons_2011-10-07.pdf    1337683 Options  Priority:     Standard  Return Notification:    No  Reply Requested:    No  Sensitivity:    Normal  Expiration Date:      Recipients Received:       
Davis-Besse Nuclear Power Station, Unit No. 1 L-11-292 Page 3 Attachments:
: 1. Reply to Request for Additional Information for the Review of the Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS), License Renewal Application, Sections 2.4, 3.1.2, 3.2.2, 3.3.2, 3.5.2, 4.3.2, 4.6, 4.7, B.2.12, B.2.22, B.2.39 and B.2.40
: 2. Regulatory Commitment List


Davis-Besse Nuclear Power Station, Unit No. 1 L-11-292 Page 3 Attachments:1. Reply to Request for Additional Information for the Review of the Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS), License Renewal Application, Sections 2.4, 3.1.2, 3.2.2, 3.3.2, 3.5.2, 4.3.2, 4.6, 4.7, B.2.12, B.2.22, B.2.39
==Enclosures:==


and B.2.40 2. Regulatory Commitment List
A. Amendment No. 19 to the DBNPS License Renewal Application B. Revised DBNPS License Renewal Application Boundary Drawing cc: NRC DLR Project Manager NRC Region III Administrator cc: w/o Attachment or Enclosure NRC DLR Director NRR DORL Project Manager NRC Resident Inspector Utility Radiological Safety Board


==Enclosures:==
Attachment 1 L-11-292 Reply to Request for Additional Information for the Review of the Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS), License Renewal Application, Sections 2.4, 3.1.2, 3.2.2, 3.3.2, 3.5.2, 4.3.2, 4.6, 4.7, B.2.12, B.2.22, B.2.39 and B.2.40 Page 1 of 13 Section 4.3.2 Question RAI 4.3.2.3.2 (Supplement)
A. Amendment No. 19 to the DBNPS License Renewal Application B. Revised DBNPS License Renewal Application Boundary Drawing cc: NRC DLR Project Manager  NRC Region III Administrator cc: w/o Attachment or Enclosure  NRC DLR Director NRR DORL Project Manager NRC Resident Inspector  Utility Radiological Safety Board L-11-292Reply to Request for Additional Information for the Review of the Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS), License Renewal Application, Sections 2.4, 3.1.2, 3.2.2, 3.3.2, 3.5.2, 4.3.2, 4.6, 4.7, B.2.12, B.2.22, B.2.39 and B.2.40 Page 1 of 13 Section 4.3.2 Question RAI 4.3.2.3.2 (Supplement)  


==Background:==
==Background:==
By letter dated June 22, 2011, the applicant responded to RAI 4.1-1 regarding cumulative usage factor (CUF) or I t fatigue analyses for Class 1 valves. In its response to RAI 4.1-1, Request 1, Part A, the applicant identified 12 large bore Class 1 valves (i.e., valves with nominal pipe sizes in excess of 4-inches) that should have received CUF or I t fatigue analyses in accordance with the design codes (i.e., 1971 or more recent Editions of the ASME Code Section III, or the 1968 Edition of the Draft ASME Pump and Valve Code for Nuclear Power Plants).
The applicant provided Commitment No. 46 to complete the following, prior to


April 22, 2015: FENOC commits to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse  
By letter dated June 22, 2011, the applicant responded to RAI 4.1-1 regarding cumulative usage factor (CUF) or It fatigue analyses for Class 1 valves. In its response to RAI 4.1-1, Request 1, Part A, the applicant identified 12 large bore Class 1 valves (i.e., valves with nominal pipe sizes in excess of 4-inches) that should have received CUF or It fatigue analyses in accordance with the design codes (i.e., 1971 or more recent Editions of the ASME Code Section III, or the 1968 Edition of the Draft ASME Pump and Valve Code for Nuclear Power Plants).
The applicant provided Commitment No. 46 to complete the following, prior to April 22, 2015:
FENOC commits to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves that are greater than 4 inches nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21, and DH23.
LRA Section 4.3.2.3.2, as amended by letter dated June 22, 2011, states that the fatigue analyses for these 12 referenced large bore Class 1 valves are as TLAAs and are dispositioned in accordance with Title 10 of the Code of Federal Regulations 54.21(c)(1)(iii), that the effects of fatigue on Class 1 valves greater than 4 inches diameter nominal pipe size will be managed for the period of extended operation by the Fatigue Monitoring Program. LRA Section 4.3.2.3.2 also states that the issue with the missing CUF or It calculations for the 12 referenced large bore Class 1 valves has been entered into the applicants Corrective Actions Program.
Issue:
The information provided by the applicant in letter of June 22, 2011, did not provide information regarding whether the applicant had any ASME Code, Section III NB-3222.4(d) fatigue waiver assessments (or equivalent waiver assessments permitted by the 1968 Draft ASME Pump and Valve Code) for the 12 large bore Class 1 valves referenced in Commitment No. 46. Therefore, the


Class 1 valves that are greater than 4 inches nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21, and DH23. LRA Section 4.3.2.3.2, as amended by letter dated June 22, 2011, states that the fatigue analyses for these 12 referenced large bore Class 1 valves are as TLAAs and are dispositioned in accordance with Title 10 of the Code of Federal Regulations 54.21(c)(1)(iii), that the effects of fatigue on Class 1 valves greater than 4 inches diameter nominal pipe size will be managed for the period of extended operation by the Fatigue Monitoring Program. LRA Section 4.3.2.3.2 also states that the issue with the missing CUF or I t calculations for the 12 referenced large bore Class 1 valves has been entered into the applicant's Corrective Actions Program.
L-11-292 Page 2 of 13 staff requests additional information regarding whether fatigue calculations are required for these valves.
Issue:The information provided by the applicant in letter of June 22, 2011, did not provide information regarding whether the applicant had any ASME Code, Section III NB-3222.4(d) fatigue waiver assessments (or equivalent waiver assessments permitted by the 1968 Draft ASME Pump and Valve Code) for the
The staff is concerned that without the CUF or It analyses or an appropriate fatigue waiver or exemption for these 12 large bore Class 1 valves, the staff would not be able to evaluate whether the aging effects will be appropriately managed by the commitment.
 
Request:
12 large bore Class 1 valves referenced in Commitment No. 46. Therefore, the L-11-292 Page 2 of 13 staff requests additional information regarding whether fatigue calculations are required for these valves. The staff is concerned that without the CUF or I t analyses or an appropriate fatigue waiver or exemption for these 12 large bore Class 1 valves, the staff would not be able to evaluate whether the aging effects will be appropriately managed by the commitment.
Provide justification for not having the analyses for staff review as part of the LRA, or provide your appropriate fatigue waiver or fatigue exemption bases for not having such analyses.
Request:Provide justification for not having the analyses for staff review as part of the LRA, or provide your appropriate fatigue waiver or fatigue exemption bases for  
RESPONSE RAI 4.3.2.3.2 (Supplement)
 
As provided in FENOC letter dated July 22, 2011 (ML11208C274), a search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves, and the issue of missing records had been documented in the FENOC Corrective Action Program for resolution. In the July 22, 2011, letter, license renewal future Commitment 46 was provided in LRA Appendix A with an implementation date of prior to April 22, 2015, to perform a fatigue evaluation in accordance with the requirements of the ASME Code of Record for the Davis-Besse Class 1 valves greater than 4 inches diameter nominal pipe size.
not having such analyses.
However, to provide the fatigue evaluation in a timely manner to support development of the Davis-Besse license renewal safety evaluation, FENOC withdraws license renewal future Commitment 46 of LRA Appendix A, and instead provides a new regulatory commitment as follows:
RESPONSE RAI 4.3.2.3.2 (Supplement) As provided in FENOC letter dated July 22, 2011 (ML11208C274), a search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves, and the issue of missing records had been documented in the FENOC Corrective  
FENOC will perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. LRA Sections 4.3.2.3.2 and A.2.3.2.13, both titled Class 1 Valves Fatigue, will be revised to include the results of the fatigue evaluations, and these changes will be submitted as an amendment to the Davis Besse LRA no later than May 31, 2012.
 
See Attachment 2 to this letter for the regulatory commitment.
Action Program for resolution. In the July 22, 2011, letter, license renewal future  
See Enclosure A to this letter for the revision to the DBNPS LRA.
 
Commitment 46 was provided in LRA Appendix A with an implementation date of "prior to April 22, 2015," to perform a fatigue evaluation in accordance with the requirements of the ASME Code of Record for the Davis-Besse Class 1 valves greater than 4 inches  
 
diameter nominal pipe size. However, to provide the fatigue evaluation in a timely manner to support development of the Davis-Besse license renewal safety evaluation, FENOC withdraws license renewal  
 
future Commitment 46 of LRA Appendix A, and instead provides a new regulatory commitment as follows: FENOC will perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1  
 
valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. LRA Sections 4.3.2.3.2  
 
and A.2.3.2.13, both titled "Class 1 Valves Fatigue," will be revised to include  
 
the results of the fatigue evaluations, and these changes will be submitted as an amendment to the Davis Besse LRA no later than May 31, 2012. See Attachment 2 to this letter for the regulatory commitment.  


See Enclosure A to this letter for the revision to the DBNPS LRA.
L-11-292 Page 3 of 13 Section 3.3.2 Question RAI 3.3.2.14-1
L-11-292 Page 3 of 13 Section 3.3.2 Question RAI 3.3.2.14-1  


==Background:==
==Background:==


The GALL Report states that stainless steel components exposed to steam are susceptible to loss of material and stress corrosion cracking. In LRA Table 3.3.2-14, the fire water storage tank heat exchanger contains stainless steel tubes exposed to steam that are being managed for reduction in heat transfer.
The GALL Report states that stainless steel components exposed to steam are susceptible to loss of material and stress corrosion cracking. In LRA Table 3.3.2-14, the fire water storage tank heat exchanger contains stainless steel tubes exposed to steam that are being managed for reduction in heat transfer.
However, the applicant has not identified loss of material or stress corrosion  
However, the applicant has not identified loss of material or stress corrosion cracking as applicable aging effects, as discussed in the GALL Report.
 
Issue:
cracking as applicable aging effects, as discussed in the GALL Report.
Even though the heat exchanger tubes license renewal function is heat transfer, both loss of material and stress corrosion cracking could affect the intended function. It is unclear to the staff why the applicant has not included both loss of material and stress corrosion cracking as applicable aging effects.
Issue:Even though the heat exchanger tubes license renewal function is heat transfer, both loss of material and stress corrosion cracking could affect the intended function. It is unclear to the staff why the applicant has not included both loss of  
Request:
 
Justify why loss of material and stress corrosion cracking are not applicable aging effects for the fire water storage tank heat exchanger tubes exposed to steam. If it is determined that both loss of material and stress corrosion cracking are applicable, provide information on how these aging effects will be managed.
material and stress corrosion cracking as applicable aging effects.
Request:Justify why loss of material and stress corrosion cracking are not applicable aging effects for the fire water storage tank heat exchanger tubes exposed to steam. If it is determined that both loss of material and stress corrosion cracking are applicable, provide information on how these aging effects will be managed.
RESPONSE RAI 3.3.2.14-1 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI 3.3.2.14-1 submitted under FENOC letter dated August 26, 2011 (ML11242A166), and requested a revised response to the RAI.
RESPONSE RAI 3.3.2.14-1 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI 3.3.2.14-1 submitted under FENOC letter dated August 26, 2011 (ML11242A166), and requested a revised response to the RAI.
FENOC replaces the previous response to RAI 3.3.2.14-1 in its entirety with the  
FENOC replaces the previous response to RAI 3.3.2.14-1 in its entirety with the following information.
 
The fire water storage tank heat exchanger and recirculation pump are not within the scope of license renewal since the subject components do not satisfy the scoping criteria of 10 CFR 54.4(a)(1), (a)(2), or (a)(3). The heat exchanger and the recirculation pump are used to establish initial conditions associated with event assumptions, and perform no fire protection functions. Hence it is the monitoring of the Fire Water Storage Tank that is credited with ensuring the appropriate initial conditions and therefore, the heat exchanger and recirculation pump are not in the scope of License Renewal for the Fire Protection regulated event.
following information. The fire water storage tank heat exchanger and recirculation pump are not within the scope of license renewal since the subject components do not satisfy the scoping criteria of 10 CFR 54.4(a)(1), (a)(2), or (a)(3). The heat exchanger and the recirculation  
 
pump are used to establish initial conditions associated with event assumptions, and perform no fire protection functions. Hence it is the monitoring of the Fire Water Storage  
 
Tank that is credited with ensuring the appropriate initial conditions and therefore, the  


heat exchanger and recirculation pump are not in the scope of License Renewal for the Fire Protection regulated event.
L-11-292 Page 4 of 13 The LRA is revised to delete information associated with the following components:
L-11-292 Page 4 of 13 The LRA is revised to delete information associated with the following components: Heat Exchanger (channel, shell, and tubesheet) - Fire water storage tank heat exchanger (DB-E52); Heat Exchanger (tubes) - Fire water storage tank heat exchanger (DB-E52); and, Pump Casing - Fire water storage tank recirculation pump (DB-P114).
x  Heat Exchanger (channel, shell, and tubesheet) - Fire water storage tank heat exchanger (DB-E52);
License Renewal Boundary Drawing LR-M016A, "Station Fire Protection System," is revised to remove highlighting of the piping and components associated with the Fire Water Storage Tank Heat Exchanger (E52) and Fire Water Storage Tank Recirc  
x  Heat Exchanger (tubes) - Fire water storage tank heat exchanger (DB-E52); and, x  Pump Casing - Fire water storage tank recirculation pump (DB-P114).
 
License Renewal Boundary Drawing LR-M016A, Station Fire Protection System, is revised to remove highlighting of the piping and components associated with the Fire Water Storage Tank Heat Exchanger (E52) and Fire Water Storage Tank Recirc Pump 1-1.
Pump 1-1.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure B to this letter for the revision to the LRA Boundary Drawings.
See Enclosure B to this letter for the revision to the LRA Boundary Drawings.
Section 3.1.2Supplemental Question RAI Table 3.1.2-3 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss whether an aging management review (AMR) row was missing for the reactor vessel flange leakage detection line. The NRC reviewer noted that a line item for the dissimilar metal weld was not readily identifiable. SUPPLEMENTAL RESPONSE RAI TABLE 3.1.2-3 FENOC has confirmed that a nickel-alloy weld connects the flange leakage detection line to the reactor pressure vessel closure flange tap. Therefore, LRA Table 3.1.2-3, "Aging Management Review Results - Reactor Coolant System and Reactor Coolant Pressure Boundary," is revised to provide a separate line item along with the aging management review results for the subject nickel-alloy weld.
Section 3.1.2 Supplemental Question RAI Table 3.1.2-3 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss whether an aging management review (AMR) row was missing for the reactor vessel flange leakage detection line. The NRC reviewer noted that a line item for the dissimilar metal weld was not readily identifiable.
SUPPLEMENTAL RESPONSE RAI TABLE 3.1.2-3 FENOC has confirmed that a nickel-alloy weld connects the flange leakage detection line to the reactor pressure vessel closure flange tap. Therefore, LRA Table 3.1.2-3, Aging Management Review Results - Reactor Coolant System and Reactor Coolant Pressure Boundary, is revised to provide a separate line item along with the aging management review results for the subject nickel-alloy weld.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
L-11-292 Page 5 of 13 Section 4.6 Supplemental Question RAI 4.6-1 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI 4.6-1 submitted under FENOC letter dated August 17, 2011 (ML11231A966).
L-11-292 Page 5 of 13 Section 4.6 Supplemental Question RAI 4.6-1 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI 4.6-1 submitted under FENOC letter dated August 17, 2011 (ML11231A966).
Based on the telephone conference, FENOC agreed to provide a supplemental response to RAI 4.6-1 to include the basis for the 400 pressure and 400 temperature cycles and the pressure range of -0.67 to 45 psig in LRA Appendix A, "Updated Safety Analysis Report Supplement." In addition, the NRC noted that, in the original LRA submittal, the pressure range for the fatigue waiver analysis was shown as -25 to 120 pounds per square inch (psi), whereas the range provided in the FENOC response to RAI 4.6-1 was -25 to 20 psi. FENOC agreed to provide a supplemental response to clarify that the pressure range of -25 to 120 psi provided in the LRA submittal was a typographical error and that the correct  
Based on the telephone conference, FENOC agreed to provide a supplemental response to RAI 4.6-1 to include the basis for the 400 pressure and 400 temperature cycles and the pressure range of -0.67 to 45 psig in LRA Appendix A, Updated Safety Analysis Report Supplement. In addition, the NRC noted that, in the original LRA submittal, the pressure range for the fatigue waiver analysis was shown as -25 to 120 pounds per square inch (psi), whereas the range provided in the FENOC response to RAI 4.6-1 was -25 to 20 psi. FENOC agreed to provide a supplemental response to clarify that the pressure range of -25 to 120 psi provided in the LRA submittal was a typographical error and that the correct pressure range is -25 to 20 psi.
 
SUPPLEMENTAL RESPONSE RAI 4.6-1 LRA Sections 4.6.1 and A.2.5.1, both titled, Containment Vessel, are revised to include details from the fatigue waiver information provided in the response to RAI 4.6-1 submitted under FENOC letter dated August 17, 2011 (ML11231A966), and to state that the 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation.
pressure range is -25 to 20 psi. SUPPLEMENTAL RESPONSE RAI 4.6-1 LRA Sections 4.6.1 and A.2.5.1, both titled, "Containment Vessel," are revised to include details from the fatigue waiver information provided in the response to RAI 4.6-1 submitted under FENOC letter dated August 17, 2011 (ML11231A966), and to state that the 400 cycles were based on a conservative estimate of anticipated cycles for 40 years  
In addition, LRA Sections 4.6.1 and A.2.5.1 are revised to state that the adjusted pressure range of -0.67 to 45 psig is based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25).
 
The containment vessel pressure cycle range of -25 to 120 psi stated in Sections 4.6.1 and A.2.5.1 of the original LRA submittal was a typographical error, and should have read -25 to 20 psi. However, the pressure range of -25 to 120 psi has since been replaced with the adjusted pressure range of -0.67 to 45 psig in LRA Sections 4.6.1 and A.2.5.1 in response to RAI 4.6-1 in FENOC letter dated August 17, 2011 (ML11231A966).
of operation.
In addition, LRA Sections 4.6.1 and A.2.5.1 are revised to state that the adjusted pressure range of -0.67 to 45 psig is based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). The containment vessel pressure cycle range of -25 to 120 psi stated in Sections 4.6.1 and A.2.5.1 of the original LRA submittal was a typographical error, and should have  
 
read -25 to 20 psi. However, the pressure range of -25 to 120 psi has since been  
 
replaced with the adjusted pressure range of -0.67 to 45 psig in LRA Sections 4.6.1 and A.2.5.1 in response to RAI 4.6-1 in FENOC letter dated August 17, 2011 (ML11231A966).
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
L-11-292 Page 6 of 13 Section B.2.22 Supplemental Question RAI B.2.22-7 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI B.2.22-7 submitted in FENOC letter dated August 17, 2011 (ML11231A966). The NRC noted that, in the RAI response, FENOC provided a commitment to enhance the Inservice Inspection (ISI) - IWE Program to perform examinations prior to the period of extended operation to
monitor for cracking of stainless steel containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading, but have no current licensing basis fatigue analysis. The NRC Staff noted that the frequency for the inspections was not specified, and asked for discussion of the inspection frequency. FENOC stated that the inspection frequency is planned to occur once each 10-year ISI interval; the inspections would be ISI augmented inspections. Also, the representative sample size is planned to be 10 percent of the scope. FENOC mentioned that the
general condition of the penetration is noted during Appendix J testing. In addition, FENOC stated that penetration fatigue analyses may be developed in lieu of inspections. The NRC reviewer requested an LRA change/commitment to document the frequency, sample size, basis for sample size, and to emphasize the use of Appendix J testing. In addition, FENOC should consider clarifying that fatigue analyses, if later performed for these penetration components, would then remove the requirement to perform examinations for cracking. FENOC agreed to
provide the requested information. The NRC initiated a follow-up telephone conference call with FENOC on September 16, 2011, to request that FENOC also address scheduling of the subject inspections. FENOC agreed to provide the requested information. SUPPLEMENTAL RESPONSE RAI B.2.22-7 LRA Section B.2.22, "Inservice Inspection (ISI) Program - IWE," is revised to add a license renewal enhancement to the Inservice Inspection (ISI) Program - IWE to include surface examinations to monitor for cracking of stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. In addition, the 10 CFR Part 50 Appendix J Program requires verification that a general visual inspection of the accessible interior and exterior surfaces of the L-11-292 Page 7 of 13 primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of
structural deterioration that might affect either the primary containment structural
integrity or leak tightness. A review of Davis-Besse operating experience has not identified any instances of cracking of the stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components associated with the containment penetrations. Therefore, the containment penetration inspection sample size will include 10 percent of the subject containment penetration population or a maximum of 25, whichever is less. In this case the 10 percent applies since the penetration population is less than 250. The 10 percent sample size is consistent with other NUREG-1801 programs where the inspection is designed to provide assurance that aging is not occurring. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that


occurs during the period of extended operation.
L-11-292 Page 6 of 13 Section B.2.22 Supplemental Question RAI B.2.22-7 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI B.2.22-7 submitted in FENOC letter dated August 17, 2011 (ML11231A966). The NRC noted that, in the RAI response, FENOC provided a commitment to enhance the Inservice Inspection (ISI) - IWE Program to perform examinations prior to the period of extended operation to monitor for cracking of stainless steel containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading, but have no current licensing basis fatigue analysis.
By letter dated August 17, 2011 (ML11231A966), FENOC provided license renewal future Commitment 47 to enhance the Inservice Inspection (ISI) Program - IWE to include examinations to monitor for cracking of stainless steel containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. Commitment 47 is revised to clarify that, should fatigue analyses be performed in the future for the containment
The NRC Staff noted that the frequency for the inspections was not specified, and asked for discussion of the inspection frequency. FENOC stated that the inspection frequency is planned to occur once each 10-year ISI interval; the inspections would be ISI augmented inspections. Also, the representative sample size is planned to be 10 percent of the scope. FENOC mentioned that the general condition of the penetration is noted during Appendix J testing. In addition, FENOC stated that penetration fatigue analyses may be developed in lieu of inspections.
The NRC reviewer requested an LRA change/commitment to document the frequency, sample size, basis for sample size, and to emphasize the use of Appendix J testing. In addition, FENOC should consider clarifying that fatigue analyses, if later performed for these penetration components, would then remove the requirement to perform examinations for cracking. FENOC agreed to provide the requested information.
The NRC initiated a follow-up telephone conference call with FENOC on September 16, 2011, to request that FENOC also address scheduling of the subject inspections. FENOC agreed to provide the requested information.
SUPPLEMENTAL RESPONSE RAI B.2.22-7 LRA Section B.2.22, Inservice Inspection (ISI) Program - IWE, is revised to add a license renewal enhancement to the Inservice Inspection (ISI) Program - IWE to include surface examinations to monitor for cracking of stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis.
In addition, the 10 CFR Part 50 Appendix J Program requires verification that a general visual inspection of the accessible interior and exterior surfaces of the


penetrations, the examinations will no longer be required.
L-11-292 Page 7 of 13 primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.
A review of Davis-Besse operating experience has not identified any instances of cracking of the stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components associated with the containment penetrations. Therefore, the containment penetration inspection sample size will include 10 percent of the subject containment penetration population or a maximum of 25, whichever is less. In this case the 10 percent applies since the penetration population is less than 250. The 10 percent sample size is consistent with other NUREG-1801 programs where the inspection is designed to provide assurance that aging is not occurring. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation.
By letter dated August 17, 2011 (ML11231A966), FENOC provided license renewal future Commitment 47 to enhance the Inservice Inspection (ISI) Program - IWE to include examinations to monitor for cracking of stainless steel containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. Commitment 47 is revised to clarify that, should fatigue analyses be performed in the future for the containment penetrations, the examinations will no longer be required.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Section B.2.39 Supplemental Question RAI B.2.39-11 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI B.2.39-11 submitted in FENOC letter dated August 26, 2011 (ML11242A166), regarding groundwater effects to concrete  
Section B.2.39 Supplemental Question RAI B.2.39-11 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI B.2.39-11 submitted in FENOC letter dated August 26, 2011 (ML11242A166), regarding groundwater effects to concrete structures. The NRC deemed the information in the response acceptable, except that implementation by April 2017 is not acceptable. The NRC reviewer questioned whether the evaluation of core bores could occur and be dispositioned as early as 2014.
 
structures. The NRC deemed the information in the response acceptable, except that implementation by April 2017 is not acceptable. The NRC reviewer questioned whether the evaluation of core bores could occur and be dispositioned as early as 2014.
L-11-292 Page 8 of 13 SUPPLEMENTAL RESPONSE RAI B.2.39-11 FENOC agrees that implementation of core bores of concrete structures can occur by the end of year 2014. LRA Table A-1, "Davis-Besse License Renewal Commitments," license
 
renewal future Commitments 20 and 26, are revised to change the implementation
 
schedule for core bores and evaluation of concrete due to aggressive groundwater from


April 22, 2017 to December 31, 2014.
L-11-292 Page 8 of 13 SUPPLEMENTAL RESPONSE RAI B.2.39-11 FENOC agrees that implementation of core bores of concrete structures can occur by the end of year 2014. LRA Table A-1, Davis-Besse License Renewal Commitments, license renewal future Commitments 20 and 26, are revised to change the implementation schedule for core bores and evaluation of concrete due to aggressive groundwater from April 22, 2017 to December 31, 2014.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Section 3.2.2.2.3.6Supplemental Question RAI 3.2.2.2.3.6-2 On September 21, 2011, the NRC questioned the changes made in response to Supplemental RAI 3.2.2.2.3.6-2 to LRA Table 3.3.2-26, "Aging Management Review Results - Service Water System," row 83, and Table 3.3.2 27, "Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System," row 38, provided in FENOC letter dated September 16, 2011 (ML11264A059). Specifically, the NRC staff noted that, following a line-by-line comparison of the tables to the LRA, the environments listed in two of the revised rows appeared to be incorrect. Additionally, the NRC initiated a telephone conference call with FENOC on September 29, 2011, to address the response to Supplemental RAI 3.2.2.2.3.6-2.  
Section 3.2.2.2.3.6 Supplemental Question RAI 3.2.2.2.3.6-2 On September 21, 2011, the NRC questioned the changes made in response to Supplemental RAI 3.2.2.2.3.6-2 to LRA Table 3.3.2-26, Aging Management Review Results - Service Water System, row 83, and Table 3.3.2 27, Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System, row 38, provided in FENOC letter dated September 16, 2011 (ML11264A059). Specifically, the NRC staff noted that, following a line-by-line comparison of the tables to the LRA, the environments listed in two of the revised rows appeared to be incorrect.
 
Additionally, the NRC initiated a telephone conference call with FENOC on September 29, 2011, to address the response to Supplemental RAI 3.2.2.2.3.6-2.
In its response dated September 16, 2011 (ML11264A059), the applicant stated the following: "Furthermore, the LRA is revised to define the moist air (internal) environment to encompass both the air-water interface and the air environment above the interface. In conclusion, the Inspection of Internal  
In its response dated September 16, 2011 (ML11264A059), the applicant stated the following:
Furthermore, the LRA is revised to define the moist air (internal) environment to encompass both the air-water interface and the air environment above the interface. In conclusion, the Inspection of Internal Surfaces in Miscellaneous Piping and Ducting Program manages loss of material (except for selective leaching) and cracking for all in scope components subject to a moist air environment.
The NRC reviewer noted that changes to the associated aging management review rows seemed to be as expected. However, the reviewer had a question on rows 25 and 32 of LRA Table 3.3.2-27. The rows are for the stainless steel piping with an environment of Air-indoor uncontrolled (internal) and the reviewer requested that FENOC confirm that these rows are not associated with an air-water interface, and that no changes to these rows are needed.


Surfaces in Miscellaneous Piping and Ducting Program manages loss of
L-11-292 Page 9 of 13 SUPPLEMENTAL RESPONSE RAI 3.2.2.2.3.6-2 FENOC agrees that the environments listed in LRA Table 3.3.2-26, Aging Management Review Results - Service Water System, row 83, and Table 3.3.2 27, Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System, row 38, in FENOC letter dated September 16, 2011 (ML11264A059), were inadvertently changed from Moist air (External) to Moist air (Internal). LRA Tables 3.3.2-26 and 3.3.2-27 are revised to include the correct Moist air (External) environment.
 
material (except for selective leaching) and cracking for all in scope components subject to a moist air environment." The NRC reviewer noted that changes to the associated aging management review rows seemed to be as expected. However, the reviewer had a question on rows 25 and 32 of LRA Table 3.3.2-27. The rows are for the stainless steel piping with an environment of "Air-indoor uncontrolled (internal)" and the reviewer requested that FENOC confirm that these rows are not associated with an air-water interface, and that no changes to these rows are needed.
L-11-292 Page 9 of 13 SUPPLEMENTAL RESPONSE RAI 3.2.2.2.3.6-2 FENOC agrees that the environments listed in LRA Table 3.3.2-26, "Aging Management Review Results - Service Water System," row 83, and Table 3.3.2 27, "Aging  
 
Management Review Results - Spent Fuel Pool Cooling and Cleanup System," row 38, in FENOC letter dated September 16, 2011 (ML11264A059), were inadvertently  
 
changed from "Moist air (External)" to "Moist air (Internal)." LRA Tables 3.3.2-26 and 3.3.2-27 are revised to include the correct "Moist air (External)" environment.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Rows 25 and 32 of LRA Table 3.3.2-27 are not associated with an air-water interface.
Rows 25 and 32 of LRA Table 3.3.2-27 are not associated with an air-water interface.
Row 25 is applicable to stainless steel drain piping in scope for 10 CFR 54.4(a)(1). The fuel transfer tubes contain vents, drains and test connections with valves that are  
Row 25 is applicable to stainless steel drain piping in scope for 10 CFR 54.4(a)(1). The fuel transfer tubes contain vents, drains and test connections with valves that are normally closed. Therefore, piping located downstream from these valves is open to the ambient atmosphere and evaluated as Air-indoor uncontrolled (Internal).
 
Row 32 is applicable to stainless steel overflow piping in scope for 10 CFR 54.4(a)(2).
normally closed. Therefore, piping located downstream from these valves is open to the ambient atmosphere and evaluated as "Air-indoor uncontrolled (Internal)."
The spent fuel pool overflow piping has an inlet at a higher elevation than the normal spent fuel pool water surface level. Therefore, spent fuel pool water does not normally enter the overflow piping. This piping is open to the ambient atmosphere and is evaluated as Air-indoor uncontrolled (Internal).
Row 32 is applicable to stainless steel overflow piping in scope for 10 CFR 54.4(a)(2). The spent fuel pool overflow piping has an inlet at a higher elevation than the normal  
Therefore, no changes are required to LRA Table 3.3.2-27 for rows 25 and 32.
 
Section 3.5.2 Supplemental Question RAI OIN-363 (Containment Vessel Surfaces)
spent fuel pool water surface level. Therefore, spent fuel pool water does not normally  
FENOC generated Open Item Number OIN-363 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of May 9, 2011, to address an Inspector request regarding containment vessel surfaces. NRC Region III letter dated June 27, 2011, Davis-Besse Nuclear Power Station NRC License Renewal Scoping, Screening, and Aging Management Inspection Report 05000346/2011010 (ML11179A134), states that, The inspectors also identified the environment and aging mechanisms affecting the exterior containment vessel surface were not explicitly defined in the LRA or in NUREG-1801. The applicant issued OIN-363 to track an update of the LRA to identify the 10 CFR 50 Appendix J Program for management of both internal and external containment vessel surfaces.
 
enter the overflow piping. This piping is open to the ambient atmosphere and is  


evaluated as "Air-indoor uncontrolled (Internal)." Therefore, no changes are required to LRA Table 3.3.2-27 for rows 25 and 32.
L-11-292 Page 10 of 13 SUPPLEMENTAL RESPONSE RAI OIN-363 (CONTAINMENT VESSEL SURFACES)
Section 3.5.2Supplemental Question RAI OIN-363 (Containment Vessel Surfaces) FENOC generated Open Item Number OIN-363 during the NRC Region III Inspection Procedure IP-71002, "License Renewal Inspection," held during the week of May 9, 2011, to address an Inspector request regarding containment
Row No. 5 of LRA Table 3.5.2-1, Aging Management Review Results - Containment, addresses the Davis-Besse carbon steel containment vessel in an air-indoor environment. FENOC adds new plant-specific Note 0551 to the Plant-Specific Notes Table for Structures. Note 0551 states, The 10 CFR 50 Appendix J Program manages aging of both the internal and external surfaces of the containment vessel. FENOC also adds Note 0551 to the Notes column for Row No. 5 of LRA Table 3.5.2-1.
 
vessel surfaces. NRC Region III letter dated June 27, 2011, "Davis-Besse Nuclear Power Station NRC License Renewal Scoping, Screening, and Aging Management Inspection Report 05000346/2011010" (ML11179A134), states that, "The inspectors also identified the environment and aging mechanisms affecting the exterior containment vessel surface were not explicitly defined in the LRA or in NUREG-1801. The applicant issued OIN-363 to track an update of the LRA to identify the 10 CFR 50 Appendix J Program for management of both internal and
 
external containment vessel surfaces."
L-11-292 Page 10 of 13 SUPPLEMENTAL RESPONSE RAI OIN-363 (CONTAINMENT VESSEL SURFACES) Row No. 5 of LRA Table 3.5.2-1, "Aging Management Review Results - Containment,"
addresses the Davis-Besse carbon steel containment vessel in an "air-indoor" environment. FENOC adds new plant-specific Note 0551 to the "Plant-Specific Notes"
 
Table for Structures. Note 0551 states, "The 10 CFR 50 Appendix J Program manages aging of both the internal and external surfaces of the containment vessel." FENOC also adds Note "0551" to the "Notes" column for Row No. 5 of LRA Table 3.5.2-1.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Section B.2.12Supplemental Question RAI OIN-377 (Accessible Cables) FENOC generated Open Item Number OIN-377 during the NRC Region III Inspection Procedure IP-71002, "License Renewal Inspection," held during the week of August 22, 2011, to address an Inspector request regarding inspection of  
Section B.2.12 Supplemental Question RAI OIN-377 (Accessible Cables)
 
FENOC generated Open Item Number OIN-377 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding inspection of accessible cables in adverse localized environments. NRC Report, Audit Report Regarding the Davis-Besse Nuclear Power Station License Renewal Application (TAC NO. ME4640), dated June 1, 2011 (ML11122A014), page 26 (LRA AMP B.2.12 section), states:
accessible cables in adverse localized environments. NRC Report, "Audit Report Regarding the Davis-Besse Nuclear Power Station License Renewal Application (TAC NO. ME4640)," dated June 1, 2011 (ML11122A014), page 26 (LRA AMP B.2.12  
During a breakout meeting, the staff questioned and verified that the sample size of cable inspection will include all inaccessible cables within adverse localized environment.
 
NRC Region III Inspection lead concurred that the word inaccessible in the above report statement is an error, and that the NRC intent was to establish consistency with NUREG-1801, Generic Aging Lessons Learned (GALL) Report, Revision 2, which specifies that all accessible cables within an adverse localized environment be inspected.
section), states:  
FENOC agreed to revise LRA Section B.2.12, Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program, and the underlying program evaluation document, to remove reference to inspection of a representative sample of cables in adverse localized environments, and specify that all accessible cables in adverse localized environments are to be inspected.
"During a breakout meeting, the staff questioned and verified that the sample size of cable inspection will include all inaccessible cables within  
 
adverse localized environment." NRC Region III Inspection lead concurred that the word "inaccessible" in the above report statement is an error, and that the NRC intent was to establish consistency with NUREG-1801, "Generic Aging Lessons Learned (GALL) Report,"
Revision 2, which specifies that all "accessible" cables within an adverse  
 
localized environment be inspected.
FENOC agreed to revise LRA Section B.2.12, "Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program,"
and the underlying program evaluation document, to remove reference to  
 
inspection of a "representative sample" of cables in adverse localized environments, and specify that all accessible cables in adverse localized  


environments are to be inspected.
L-11-292 Page 11 of 13 SUPPLEMENTAL RESPONSE RAI OIN-377 (ACCESSIBLE CABLES)
L-11-292 Page 11 of 13 SUPPLEMENTAL RESPONSE RAI OIN-377 (ACCESSIBLE CABLES)
LRA Section B.2.12 and its associated program evaluation document are revised to remove reference to inspection of a "representative sample" of cables in adverse  
LRA Section B.2.12 and its associated program evaluation document are revised to remove reference to inspection of a representative sample of cables in adverse localized environments, and specify that all accessible cables in adverse localized environments are to be inspected.
 
localized environments, and specify that all accessible cables in adverse localized  
 
environments are to be inspected.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Section 4.7Supplemental Question RAI OIN-378 (Crane Cycles TLAA) FENOC generated Open Item Number OIN-378 during the NRC Region III Inspection Procedure IP-71002, "License Renewal Inspection," held during the week of August 22, 2011, to address an Inspector request regarding crane cycles.
Section 4.7 Supplemental Question RAI OIN-378 (Crane Cycles TLAA)
The NRC disagreed with the FENOC position that there is no time-limited aging analysis (TLAA) associated with the crane cycles for the Davis-Besse NUREG-0612 cranes. Based on discussions with the NRC, FENOC agreed to disposition the crane cycles as a TLAA. SUPPLEMENTAL RESPONS E RAI OIN-378 (CRANE CYCLES TLAA) The LRA is revised to include new Sections 4.7.7 and A.2.7.6, both titled "Crane Load Cycles," to address the disposition of the time-limited aging analysis associated with  
FENOC generated Open Item Number OIN-378 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding crane cycles.
 
The NRC disagreed with the FENOC position that there is no time-limited aging analysis (TLAA) associated with the crane cycles for the Davis-Besse NUREG-0612 cranes. Based on discussions with the NRC, FENOC agreed to disposition the crane cycles as a TLAA.
crane load cycles.
SUPPLEMENTAL RESPONSE RAI OIN-378 (CRANE CYCLES TLAA)
The LRA is revised to include new Sections 4.7.7 and A.2.7.6, both titled Crane Load Cycles, to address the disposition of the time-limited aging analysis associated with crane load cycles.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Section B.2.40 Supplemental Question RAI OIN-379 (Water Control Structures Inspection) FENOC generated Open Item Number OIN-379 during the NRC Region III Inspection Procedure IP-71002, "License Renewal Inspection," held during the week of August 22, 2011, to address an Inspector request regarding the Water L-11-292 Page 12 of 13 Control Structures Inspection. NRC inspectors requested that the Davis-Besse Water Control Structures Inspection include an enhancement to the acceptance criteria element, as follows: Enhance the acceptance criteria for the Water Control Structures Inspection to require that loose bolts and nuts, cracked high strength
Section B.2.40 Supplemental Question RAI OIN-379 (Water Control Structures Inspection)
 
FENOC generated Open Item Number OIN-379 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding the Water
bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and
 
standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and those referenced in the plant's
 
current licensing basis. SUPPLEMENTAL RESPONSE RAI OIN-379 (WATER CONTROL STRUCTURES INSPECTION)
LRA Section B.2.40, "Water Control Structures Inspection," and Table A-1, "Davis-Besse License Renewal Commitments," are revised to include a program enhancement and a new license renewal future commitment bullet to Commitment 21 to include further clarification to the "Structures Monitoring Program" procedure, which


includes the "Water Control Structures Inspection."
L-11-292 Page 12 of 13 Control Structures Inspection. NRC inspectors requested that the Davis-Besse Water Control Structures Inspection include an enhancement to the acceptance criteria element, as follows:
Enhance the acceptance criteria for the Water Control Structures Inspection to require that loose bolts and nuts, cracked high strength bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and those referenced in the plants current licensing basis.
SUPPLEMENTAL RESPONSE RAI OIN-379 (WATER CONTROL STRUCTURES INSPECTION)
LRA Section B.2.40, Water Control Structures Inspection, and Table A-1, Davis-Besse License Renewal Commitments, are revised to include a program enhancement and a new license renewal future commitment bullet to Commitment 21 to include further clarification to the Structures Monitoring Program procedure, which includes the Water Control Structures Inspection.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Section 2.4Supplemental Question RAI OIN-381 (Yard and Switchyard Towers) FENOC generated Open Item Number OIN-381 during the NRC Region III Inspection Procedure IP-71002, "License Renewal Inspection," held during the week of August 22, 2011, to address an Inspector request regarding Yard and Switchyard towers. NRC inspectors requested that the Davis-Besse switchyard distribution towers be specifically identified in the Structures Monitoring Program as components that are in scope for the Station Blackout (SBO) regulated event, as follows: The description of SBO structural components will be expanded to include the cable support structures, by name, for the SBO electrical L-11-292 Page 13 of 13 pathway in the Switchyard and from the Switchyard to the transformers in the Yard. SUPPLEMENTAL RESPONSE RAI OIN-381 (YARD AND SWITCHYARD TOWERS) The LRA is revised to include Switchyard Towers and Yard Towers for 345 kV electrical distribution as specific component types that are in scope for license renewal for the Station Blackout (SBO) regulated event. The component types are added to LRA Section 2.4.12, "Yard Structures," Subsection 2.4.12.9, under the description of Station
Section 2.4 Supplemental Question RAI OIN-381 (Yard and Switchyard Towers)
 
FENOC generated Open Item Number OIN-381 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding Yard and Switchyard towers. NRC inspectors requested that the Davis-Besse switchyard distribution towers be specifically identified in the Structures Monitoring Program as components that are in scope for the Station Blackout (SBO) regulated event, as follows:
Blackout Component Foundations and Structures in the Yard and Switchyard, and to
The description of SBO structural components will be expanded to include the cable support structures, by name, for the SBO electrical
 
Table 2.4-12 "Yard Structures Components Subject to Aging Management Review."
 
Also, two new rows are added to Table 3.5.2-12, "Aging Management Review Results -


Yard Structures."
L-11-292 Page 13 of 13 pathway in the Switchyard and from the Switchyard to the transformers in the Yard.
SUPPLEMENTAL RESPONSE RAI OIN-381 (YARD AND SWITCHYARD TOWERS)
The LRA is revised to include Switchyard Towers and Yard Towers for 345 kV electrical distribution as specific component types that are in scope for license renewal for the Station Blackout (SBO) regulated event. The component types are added to LRA Section 2.4.12, Yard Structures, Subsection 2.4.12.9, under the description of Station Blackout Component Foundations and Structures in the Yard and Switchyard, and to Table 2.4-12 Yard Structures Components Subject to Aging Management Review.
Also, two new rows are added to Table 3.5.2-12, Aging Management Review Results -
Yard Structures.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
Supplemental Question RAI OIN-382 (Elastomeric Vibration Isolators) FENOC generated Open Item Number OIN-382 during the NRC Region III Inspection Procedure IP-71002, "License Renewal Inspection," held during the week of August 22, 2011, to address an Inspector request regarding elastomeric vibration isolators. A discussion with an NRC Inspector resulted in the discovery that there were elastomeric components used in the plant for vibration isolation of plant components; such elastomeric components are not currently described in the LRA. Therefore, a change to the LRA is required, described as follows: The list of in-scope elastomeric components will be expanded to include the elastomeric elements in vibration isolators. SUPPLEMENTAL RESPONSE RAI OIN-382 (ELASTOMERIC VIBRATION ISOLATORS)
Supplemental Question RAI OIN-382 (Elastomeric Vibration Isolators)
LRA Section 2.4, "Scoping and Screening Results: Structures," and Section 3.5.2, "Results," are revised to include elastomeric vibration isolators in the list of in-scope elastomeric components, including elastomeric elements in vibration isolators. Also, as a result of the review of this item, the 'support for criterion (a)(1) equipment' (SSR) intended function is added for metal vibration isolators, including metal elements in vibration isolators.
FENOC generated Open Item Number OIN-382 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding elastomeric vibration isolators. A discussion with an NRC Inspector resulted in the discovery that there were elastomeric components used in the plant for vibration isolation of plant components; such elastomeric components are not currently described in the LRA. Therefore, a change to the LRA is required, described as follows:
The list of in-scope elastomeric components will be expanded to include the elastomeric elements in vibration isolators.
SUPPLEMENTAL RESPONSE RAI OIN-382 (ELASTOMERIC VIBRATION ISOLATORS)
LRA Section 2.4, Scoping and Screening Results: Structures, and Section 3.5.2, Results, are revised to include elastomeric vibration isolators in the list of in-scope elastomeric components, including elastomeric elements in vibration isolators. Also, as a result of the review of this item, the support for criterion (a)(1) equipment (SSR) intended function is added for metal vibration isolators, including metal elements in vibration isolators.
See Enclosure A to this letter for the revision to the DBNPS LRA.
See Enclosure A to this letter for the revision to the DBNPS LRA.
L-11-292 Regulatory Commitment List Page 1 of 1 The following list identifies those actions committed to by FirstEnergy Nuclear Operating Company (FENOC) for the Davis-Besse Nuclear Power Station, Unit No. 1 (Davis-Besse)
in this document. Any other actions discussed in the submittal represent intended or planned actions by FENOC. They are described only as information and are not Regulatory Commitments. Please notify Mr. Clifford I. Custer, Project Manager - Fleet License Renewal, at (724) 682-7139 of any questions regarding this document or
associated Regulatory Commitments. Regulatory Commitment Due Date 1. FENOC will perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1
valves that are greater than 4 inches diameter
nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. LRA Sections 4.3.2.3.2 and A.2.3.2.13, both titled "Class 1 Valves Fatigue,"
will be revised to include the results of the fatigue evaluations, and these changes will be submitted
as an amendment to the Davis-Besse LRA no
later than May 31, 2012.
May 31, 2012 Enclosure A Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS)
Letter L-11-292 Amendment No. 19 to theDBNPS License Renewal Application Page 1 of 52 License Renewal Application Sections Affected LRA Table of Contents  Section 3.3.2.1.14  Section 4.3.3.2  Table 3.3.2-14  Section 4.6.1 Section 2  Table 3.3.2-26  Section 4.7.7 Table 2.2-3  Table 3.3.2-27 Table 2.3.1-3  Section 3.5.2.1.13 Appendix A Table 2.3.3-14  Section 3.5.2.2.2.6  Table of Contents Section 2.4  Table 3.5.1  Section A.1.22 Section 2.4.12  Table 3.5.2-1  Section A.2.3.2.13 Section 2.4.12.9  Table 3.5.2-12  Section A.2.5.1 Table 2.4-12  Table 3.5.2-13  Section A.2.7.6 Table 2.4-13  Table 3.5.2 P-S Notes  Table A-1 Section 3 Section 4 Appendix B Section 3.1.2.2.13  Table 4.1-1  Section B.2.12 Table 3.1.1  Table 4.1-2  Section B.2.22 Table 3.1.2-3  Section 4.3.2.3.2  Section B.2.40 The Enclosure identifies the change to the License Renewal Application (LRA) by Affected LRA Section, LRA Page No., and Affected Paragraph and Sentence. The
count for the affected paragraph, sentence, bullet, etc. starts at the beginning of the affected Section or at the top of the affected page, as appropriate. Below each section the reason for the change is identified, and the sentence affected is printed in italics with deleted text lined-out and added text underlined
.
Enclosure A L-11-292 Page 2 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable of ContentsPage xii New Row In response to Supplemental RAI OIN-378, the Table of Contents is revised to add new LRA Section 4.7.7, "Crane Load Cycles," as follows:
4.7.7 C RANE L OAD C YCLES..........................................................................4.7-6 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 2.2-3Pages 2.2-7,            2.2-9
and 2.2-10 3 New Rows Errata: During development of responses to NRC RAIs, FENOC identified that three types of structures were inadvertently not included in LRA Table 2.2-3, License Renewal Scoping Results for Structures." LRA Table 2.2-3 is revised to
include three new rows as follows:
Table 2.2-3 License Renewal Scoping Results for Structures Structure Name In-Scope Screening Results / Section Cable Trenches Yes 2.4.12 Duct Banks Yes 2.4.12 Manholes Yes 2.4.12 Enclosure A L-11-292 Page 3 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 2.3.1-3Page 2.3-16 New Row In response to Supplemental RAI Table 3.1.2-3, a new row is added to LRA Table 2.3.1-3, "Reactor Coolant System and Reactor Coolant Pressure Boundary Components Subject to Aging Management Review," to read as follows: Component Type Intended Function (as defined in Table 2.0-1) Piping <4 inches - RV flange leakage line tap weld Pressure boundary Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 2.3.3-14Page 2.3-95 3 Rows In response to RAI 3.3.2.14-1, the rows associated with the fire water storage tank heat exchanger and the fire water storage tank recirculation pump in LRA Table 2.3.3-14, "Fire Protection System Components Subject to Aging
Management Review," are no longer needed and are deleted as follows: Component Type Intended Function (as defined in Table 2.0-1) Heat Exchanger (channel, shell, and tubesheet)
- Fire water storage tank heat exchanger (DB
-E52) Pressure boundary Heat Exchanger (tubes)
- Fire water storage tank heat exchanger (DB
-E52) Heat transfer Pump Casing
- Fire water storage tank recirculation pump (DB
-P114) Pressure boundary
Enclosure A L-11-292 Page 4 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceSection 2.4Pages 2.4-1 and 2.4-2 "Note," 2 new structural sub-items in Station Blackout Components and


StructuresIn response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the "Note" located at the end of the list of structures in the scope of license renewal at the beginning of LRA Section 2.4, "Scoping and Screening Results: Structures," as
Attachment 2 L-11-292 Regulatory Commitment List Page 1 of 1 The following list identifies those actions committed to by FirstEnergy Nuclear Operating Company (FENOC) for the Davis-Besse Nuclear Power Station, Unit No. 1 (Davis-Besse) in this document. Any other actions discussed in the submittal represent intended or planned actions by FENOC. They are described only as information and are not Regulatory Commitments. Please notify Mr. Clifford I. Custer, Project Manager - Fleet License Renewal, at (724) 682-7139 of any questions regarding this document or associated Regulatory Commitments.
Regulatory Commitment                              Due Date
: 1. FENOC will perform a fatigue evaluation in                May 31, 2012 accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. LRA Sections 4.3.2.3.2 and A.2.3.2.13, both titled Class 1 Valves Fatigue, will be revised to include the results of the fatigue evaluations, and these changes will be submitted as an amendment to the Davis-Besse LRA no later than May 31, 2012.


follows:Note: The yard structures evaluated for license renewal include foundations and structural arrangements for the Borated Water Storage Tank (including Trench);
Enclosure A Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS)
Letter L-11-292 Amendment No. 19 to the DBNPS License Renewal Application Page 1 of 52 License Renewal Application Sections Affected LRA Table of Contents          Section 3.3.2.1.14            Section 4.3.3.2 Table 3.3.2-14                Section 4.6.1 Section 2                      Table 3.3.2-26                Section 4.7.7 Table 2.2-3                    Table 3.3.2-27 Table 2.3.1-3                  Section 3.5.2.1.13            Appendix A Table 2.3.3-14                  Section 3.5.2.2.2.6          Table of Contents Section 2.4                    Table 3.5.1                  Section A.1.22 Section 2.4.12                  Table 3.5.2-1                Section A.2.3.2.13 Section 2.4.12.9                Table 3.5.2-12                Section A.2.5.1 Table 2.4-12                    Table 3.5.2-13                Section A.2.7.6 Table 2.4-13                    Table 3.5.2 P-S Notes        Table A-1 Section 3                      Section 4                    Appendix B Section 3.1.2.2.13              Table 4.1-1                  Section B.2.12 Table 3.1.1                    Table 4.1-2                  Section B.2.22 Table 3.1.2-3                  Section 4.3.2.3.2            Section B.2.40 The Enclosure identifies the change to the License Renewal Application (LRA) by Affected LRA Section, LRA Page No., and Affected Paragraph and Sentence. The count for the affected paragraph, sentence, bullet, etc. starts at the beginning of the affected Section or at the top of the affected page, as appropriate. Below each section the reason for the change is identified, and the sentence affected is printed in italics with deleted text lined-out and added text underlined.


Diesel Oil Pump House, Diesel Oil Storage Tank, Emergency Diesel Generator Fuel Oil Storage Tanks; Fire Hydrant Hose Houses; Fire Walls between Bus-Tie
Enclosure A L-11-292 Page 2 of 52 Affected LRA Section        LRA Page No.            Affected Paragraph and Sentence Table of Contents          Page xii                New Row In response to Supplemental RAI OIN-378, the Table of Contents is revised to add new LRA Section 4.7.7, Crane Load Cycles, as follows:
4.7.7    CRANE LOAD CYCLES .......................................................................... 4.7-6 Affected LRA Section        LRA Page No.            Affected Paragraph and Sentence Table 2.2-3                Pages 2.2-7,           3 New Rows 2.2-9 and 2.2-10 Errata: During development of responses to NRC RAIs, FENOC identified that three types of structures were inadvertently not included in LRA Table 2.2-3, License Renewal Scoping Results for Structures. LRA Table 2.2-3 is revised to include three new rows as follows:
Table 2.2-3 License Renewal Scoping Results for Structures Structure Name                  In-Scope                    Screening Results / Section Cable Trenches                      Yes                                      2.4.12 Duct Banks                          Yes                                      2.4.12 Manholes                            Yes                                      2.4.12


Transformers, between Bus-Tie and Startup Transformer 01, and between
Enclosure A L-11-292 Page 3 of 52 Affected LRA Section      LRA Page No.        Affected Paragraph and Sentence Table 2.3.1-3              Page 2.3-16        New Row In response to Supplemental RAI Table 3.1.2-3, a new row is added to LRA Table 2.3.1-3, Reactor Coolant System and Reactor Coolant Pressure Boundary Components Subject to Aging Management Review, to read as follows:
Intended Function Component Type (as defined in Table 2.0-1)
Piping <4 inches - RV flange leakage line tap Pressure boundary weld Affected LRA Section      LRA Page No.        Affected Paragraph and Sentence Table 2.3.3-14            Page 2.3-95        3 Rows In response to RAI 3.3.2.14-1, the rows associated with the fire water storage tank heat exchanger and the fire water storage tank recirculation pump in LRA Table 2.3.3-14, Fire Protection System Components Subject to Aging Management Review, are no longer needed and are deleted as follows:
Intended Function Component Type (as defined in Table 2.0-1)
Heat Exchanger (channel, shell, and tubesheet) -
Pressure boundary Fire water storage tank heat exchanger (DB-E52)
Heat Exchanger (tubes) - Fire water storage tank Heat transfer heat exchanger (DB-E52)
Pump Casing - Fire water storage tank Pressure boundary recirculation pump (DB-P114)


Auxiliary and Main Transformers; Fire Water Storage Tank; Nitrogen Storage  
Enclosure A L-11-292 Page 4 of 52 Affected LRA Section        LRA Page No.          Affected Paragraph and Sentence Section 2.4                  Pages 2.4-1          Note, 2 new structural sub-items in and 2.4-2        Station Blackout Components and Structures In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the Note located at the end of the list of structures in the scope of license renewal at the beginning of LRA Section 2.4, Scoping and Screening Results: Structures, as follows:
Note: The yard structures evaluated for license renewal include foundations and structural arrangements for the Borated Water Storage Tank (including Trench);
Diesel Oil Pump House, Diesel Oil Storage Tank, Emergency Diesel Generator Fuel Oil Storage Tanks; Fire Hydrant Hose Houses; Fire Walls between Bus-Tie Transformers, between Bus-Tie and Startup Transformer 01, and between Auxiliary and Main Transformers; Fire Water Storage Tank; Nitrogen Storage Building; Station Blackout Components and Structures In the Yard and Switchyard (Startup Transformers 01 and 02, Bus-Tie Transformers, 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563, ACB34564, air break switch ABS34625, Relay House, Switchyard and Yard Towers for 345-kV distribution, J and K buses); Wave Protection Dikes; Duct Banks; Cable Trenches; and Manholes.


Building; Station Blackout Components and Structures In the Yard and Switchyard (Startup Transformers 01 and 02, Bus-Tie Transformers, 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563, ACB34564, air break switch ABS34625, Relay House, Switchyard and Yard Towers for 345-kV distribution, J and K buses);
Enclosure A L-11-292 Page 5 of 52 Affected LRA Section        LRA Page No.      Affected Paragraph and Sentence Section 2.4.12              Page 2.4-1        11th Bullet, 2 new structural and 2.4-2      sub-items to Station Blackout Component Foundations and Structures list In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the eleventh bullet (Station Blackout Component Foundations and Structures) in the list of Yard Structures in LRA Section 2.4.12, Yard Structures, as follows:
Wave Protection Dikes; Duct Banks; Cable Trenches; and Manholes.
x  Station Blackout Components and Structures in the Yard and Switchyard including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; 345-kV Switchyard air break switch ABS34625; Relay House, Switchyard and Yard Towers for 345-kV distribution, and the 345-kV Switchyard J and K buses
Enclosure A L-11-292 Page 5 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceSection 2.4.12Page 2.4-1 and 2.4-2 11 th Bullet, 2 new structural sub-items to "Station Blackout


Component Foundations and  
Enclosure A L-11-292 Page 6 of 52 Affected LRA Section        LRA Page No.        Affected Paragraph and Sentence Section 2.4.12.9            Pages 2.4-42        Title, and and 2.4-43      Structure Description, 1st and 2nd Paragraphs In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the Title and to the Structure Description, first and second paragraphs, of LRA Section 2.4.12.9, Station Blackout Component Foundations and Structures in the Yard and Switchyard (Startup Transformers 01 and 02; Bus-Tie Transformers; 345 kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; J and K buses) -
Seismic Class II, as follows:
2.4.12.9 Station Blackout Component Foundations and Structures in the Yard and Switchyard (including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; Switchyard and Yard Towers for 345-kV distribution ; J and K buses) - Seismic Class II Structure Description The station blackout component foundations and structures in the yard and switchyard (including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; Switchyard and Yard Towers for 345-kV distribution; J and K buses) are Seismic Class II structures. Startup Transformers 01 and 02, Bus-Tie Transformers, and associated breakers (circuit breakers ACB34560, ACB34561, ACB34562, ACB34563, ACB34564 and air break switch ABS34625) define the physical boundary that provides an offsite alternating current (AC) source for recovery from a station blackout regulated event.
Startup Transformer 01, Startup Transformer 02, and the Bus-Tie Transformers have reinforced concrete foundations that rest on structural backfill. The transformers are supported on wall and column footings. The switchyard breakers are supported by steel frame structures. and tThe bus support structures, the switchyard towers, and the yard towers are supported by reinforced concrete caisson foundations. Cable trenches provide routing space and support to electrical cables within the station blackout boundary. The concrete cable trench is provided with removable checkered plates and top slabs for access.


Structures" list In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the eleventh bullet (Station Blackout Component Foundations and Structures) in the list of Yard Structures in LRA Section 2.4.12, "Yard Structures," as follows: Station Blackout Components and Structures in the Yard and Switchyard including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; 345-kV Switchyard air break switch ABS34625; Relay
Enclosure A L-11-292 Page 7 of 52 Affected LRA Section      LRA Page No. Affected Paragraph and Sentence Table 2.4-12              Page 2.4-47      2 New Rows In response to Supplemental RAI OIN-381, two new rows are added to Table 2.4-12, Yard Structures Components Subject to Aging Management Review, as follows:
Intended Function Component Type (as defined in Table 2.0-1)
SBO Component Support Structures: Switchyard SRE Towers for 345-kV Distribution SBO Component Support Structures: Yard SRE Towers for 345-kV Distribution


House, Switchyard and Yard Towers for 345-kV distribution, and the 345-kV Switchyard J and K buses Enclosure A L-11-292 Page 6 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceSection 2.4.12.9Pages 2.4-42 and 2.4-43 "Title," and "Structure Description," 1 st and 2 nd Paragraphs In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the "Title" and to the "Structure Description," first and second paragraphs, of LRA Section 2.4.12.9, "Station Blackout Component Foundations and Structures in the Yard and
Enclosure A L-11-292 Page 8 of 52 Affected LRA Section          LRA Page No. Affected Paragraph and Sentence Table 2.4-13                  Pages 2.4-51  Vibration Isolators Row, and and 2.4-52 1 New Row In response to Supplemental RAI OIN-382, the Vibration Isolators row of LRA Table 2.4-13, Bulk Commodities Components Subject to Aging Management Review, is revised, and a new Elastomeric Components row is added to the table, as follows:
Intended Function Component Type (as defined in Table 2.0-1)
Steel and Other Metals Vibration Isolators including elements                SNS, SRE, SSR Elastomeric Components Vibration Isolators including elements                SNS, SRE, SSR


Switchyard (Startup Transformers 01 and 02; Bus-Tie Transformers; 345 kV
Enclosure A L-11-292 Page 9 of 52 Affected LRA Section        LRA Page No.        Affected Paragraph and Sentence 3.1.2.2.13                  Page 3.1-11          New [last] sentence In response to Supplemental RAI Table 3.1.2-3, a new sentence is added to the end of LRA Section 3.1.2.2.13, Cracking due to Primary Water Stress Corrosion Cracking (PWSCC), and the section is revised to read:
3.1.2.2.13    Cracking due to Primary Water Stress Corrosion Cracking (PWSCC)
Cracking due to PWSCC could occur in PWR components made with nickel alloy and steel with nickel alloy cladding exposed to reactor coolant. Cracking due to SCC (including PWSCC) in Davis-Besse PWR components made with nickel alloy is managed by the Inservice Inspection Program, Nickel-Alloy Management Program, and PWR Water Chemistry Program. Cracking due to SCC (including PWSCC) for small-bore piping nickel-alloy welds is also managed by the Small Bore Class 1 Piping Inspection Program.


Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; "J" and "K" buses) -  
Enclosure A L-11-292 Page 10 of 52 Affected LRA Section            LRA Page No.            Affected Paragraph and Sentence Table 3.1.1                      Page 3.1-23              Row 3.1.1-31 Discussion column In response to Supplemental RAI Table 3.1.2-3, the text in the Discussion column for row 3.1.1-31 of LRA Table 3.1.1, Summary of Aging Management Programs for Reactor Vessel, Internals, Reactor Coolant System and Reactor Coolant Pressure Boundary, and Steam Generators Evaluated in Chapter IV of NUREG-1801, is revised and now reads as follows:
Table 3.1.1 Summary of Aging Management Programs for Reactor Vessel, Internals, Reactor Coolant System and Reactor Coolant Pressure Boundary, and Steam Generators Evaluated in Chapter IV of NUREG-1801 Further Item                                          Aging Effect/      Aging Management Component/Commodity                                                            Evaluation                Discussion Number                                            Mechanism                Programs Recommended 3.1.1-31 Nickel alloy and steel with nickel- Cracking due to      Inservice Inspection    No, but licensee Consistent with NUREG-1801.
alloy cladding piping, piping      primary water stress (IWB, IWC, and IWD)      commitment Cracking due to SCC (including component, piping elements,        corrosion cracking  and Water Chemistry      needs to be PWSCC) in nickel alloy penetrations, nozzles, safe ends,                        and FSAR supp            confirmed components is managed by the and welds (other than reactor                            commitment to Inservice Inspection Program, vessel head); pressurizer heater                        implement applicable PWR Water Chemistry Program, sheaths, sleeves, diaphragm                              plant commitments to (1) and Nickel-Alloy Management plate, manways and flanges;                             NRC Orders, Bulletins, Program. Cracking due to SCC core support pads/core guide                            and Generic Letters (including PWSCC) for lugs                                                    associated with nickel small-bore piping nickel-alloy alloys and (2) staff-welds is also managed by the accepted industry Small Bore Class 1 Piping guidelines.
Inspection Program.
Further evaluation is documented in Section 3.1.2.2.13.


Seismic Class II," as follows: 2.4.12.9 Station Blackout Component Foundations and Structures in the Yard and Switchyard (including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV Switchyard circuit breakers
Enclosure A L-11-292 Page 11 of 52 Affected LRA Section        LRA Page No.        Affected Paragraph and Sentence Table 3.1.2-3                Page 3.1-163        8 New Rows In response to Supplemental RAI Table 3.1.2-3, LRA Table 3.1.2-3, Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System, is revised to add eight new rows as follows:
Table 3.1.2-3        Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System NUREG-Aging Effect        Aging Row    Component      Intended                                                                  1801,  Table 1 Material  Environment      Requiring      Management                            Notes No.       Type    Function(s)                                                                Volume    Item Management        Program 2 Item Piping <4 inches RV                            Borated Pressure    Nickel                    Cracking -
  --  flange                              reactor coolant              TLAA                IV.C2-25 3.1.1-08 A boundary    Alloy                    Fatigue leakage line                        (Internal) tap weld Piping <4 inches RV                            Borated                                                              C Pressure    Nickel                    Cracking -
  --  flange                              reactor coolant              Inservice Inspection IV.C2-26 3.1.1-62 0102 boundary    Alloy                    Flaw Growth leakage line                        (Internal)                                                          0103 tap weld Piping <4 inches RV                            Borated        Cracking -
Pressure    Nickel
  --  flange                              reactor coolant PWSCC,        Inservice Inspection IV.C2-13 3.1.1-31 A boundary    Alloy leakage line                        (Internal)      SCC/IGA tap weld Piping <4 inches RV                            Borated        Cracking -
Pressure    Nickel                                  Nickel-Alloy                          A
  --  flange                              reactor coolant PWSCC,                            IV.C2-13 3.1.1-31 boundary    Alloy                                  Management                            0110 leakage line                        (Internal)      SCC/IGA tap weld


ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air
Enclosure A L-11-292 Page 12 of 52 Table 3.1.2-3      Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System NUREG-Aging Effect        Aging Row    Component    Intended                                                                1801, Table 1 Material  Environment      Requiring      Management                          Notes No.      Type    Function(s)                                                              Volume    Item Management        Program 2 Item Piping <4 inches RV                          Borated        Cracking -
Pressure    Nickel                                  PWR Water
  --  flange                              reactor coolant PWSCC,                           IV.C2-13 3.1.1-31 A boundary    Alloy                                  Chemistry leakage line                        (Internal)      SCC/IGA tap weld Piping <4 inches RV                          Borated        Cracking -
Pressure    Nickel                                  Small Bore Class 1
  --  flange                              reactor coolant PWSCC,                           IV.C2-13 3.1.1-31 E boundary    Alloy                                  Piping Inspection leakage line                        (Internal)      SCC/IGA tap weld Piping <4 inches RV                          Borated Pressure    Nickel                    Loss of      PWR Water
  --  flange                              reactor coolant                                  IV.C2-15 3.1.1-83 A boundary    Alloy                    Material      Chemistry leakage line                        (Internal) tap weld Piping <4 Air with inches RV Pressure    Nickel    borated water                                                      A
  --  flange                                              None          None              IV.E-3  3.1.1-86 boundary    Alloy    leakage                                                            0103 leakage line (External) tap weld


break switch ABS34625; Relay House; Switchyard and Yard Towers for 345-kV distribution ;
Enclosure A L-11-292 Page 13 of 52 Affected LRA Section        LRA Page No.        Affected Paragraph and Sentence 3.3.2.1.14                  Page 3.3-19          Aging Management Programs, 1 bullet In response to RAI 3.3.2.14-1, the Aging Management Program subsection of Section 3.3.2.1.14, Fire Protection System, is revised to delete the PWR Water Chemistry Program as follows:
"J" and "K" buses) - Seismic Class II Structure Description The station blackout component foundations and structures in the yard and switchyard (including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; Switchyard and Yard Towers for 345-kV distribution; J and K buses) are Seismic Class II structures. Startup Transformers 01 and 02, Bus-Tie Transformers, and associated breakers (circuit breakers ACB34560, ACB34561, ACB34562, ACB34563, ACB34564 and air break switch ABS34625) define the physical boundary that provides an offsite alternating current (AC) source for
x  PWR Water Chemistry Program


recovery from a station blackout regulated event. Startup Transformer 01, Startup Transformer 02, and the Bus-Tie Transformers have reinforced concrete foundations that rest on structural backfill. The transformers are supported on wall and column footings.
Enclosure A L-11-292 Page 14 of 52 Affected LRA Section        LRA Page No.           Affected Paragraph and Sentence Table 3.3.2-14              Pages 3.3-315          Rows 20-30 and 77-79 thru 3.3-323 In response to RAI 3.3.2.14-1, LRA Table 3.3.2-14, Aging Management Review Results - Fire Protection System, previously replaced in its entirety in FENOC letter dated September 16, 2011 (ML11264A059), is revised to identify that rows 20-30 and 77-79 are Not used, as these rows are no longer needed, and the rows now read as follows:
The switchyard breakers are supported by steel frame structures. and t The bus support structures, the switchyard towers, and the yard towers are supported by reinforced concrete caisson foundations. Cable trenches provide routing space and support to electrical cables within the station blackout boundary. The concrete cable trench is provided with removable checkered plates and top slabs
Table 3.3.2-14        Aging Management Review Results - Fire Protection System NUREG-Aging Effect      Aging Row    Component      Intended                                                                  1801,  Table 1 Material    Environment    Requiring      Management                        Notes No.      Type      Function(s)                                                              Volume    Item Management        Program 2 Item Heat Exchanger (channel) -
Fire Water                              Air-indoor Storage Tank  Pressure                                  Loss of      External Surfaces 20                                Steel      uncontrolled                                  VII.G-5  3.3.1-59 A Heat          boundary                                 material      Monitoring (External)
Exchanger (DB-E52)
Not used.


for access.
Enclosure A L-11-292 Page 15 of 52 Table 3.3.2-14        Aging Management Review Results - Fire Protection System NUREG-Aging Effect      Aging Row    Component      Intended                                                              1801,  Table 1 Material  Environment  Requiring      Management                          Notes No.       Type      Function(s)                                                            Volume    Item Management        Program 2 Item Heat Exchanger (channel) -
Enclosure A L-11-292 Page 7 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 2.4-12Page 2.4-47 2 New Rows In response to Supplemental RAI OIN-381, two new rows are added to Table 2.4-12, "Yard Structures Components Subject to Aging Management
Fire Water Storage Tank  Pressure                Raw water    Loss of 21                                Steel                                Fire Water        VII.G-24  3.3.1-68 C Heat          boundary                (Internal)  material Exchanger (DB-E52)
Not used.
Heat Exchanger (shell) - Fire Water Storage Tank  Pressure                Steam        Loss of      One-Time                              E 22                                Steel                                                    VIII.B1-8 3.4.1-37 Heat          boundary                (Internal)  material      Inspection                            0315 Exchanger (DB-E52)
Not used.
Heat Exchanger (shell) - Fire Water Storage Tank  Pressure                Steam        Loss of      PWR Water 23                                Steel                                                    VIII.B1-8 3.4.1-37 C Heat          boundary                (Internal)  material      Chemistry Exchanger (DB-E52)
Not used.


Review," as follows: Component Type Intended Function (as defined in Table 2.0-1) SBO Component Support Structures: Switchyard Towers for 345-kV Distribution SRE SBO Component Support Structures: Yard Towers for 345-kV Distribution SRE Enclosure A L-11-292 Page 8 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 2.4-13Pages 2.4-51 and 2.4-52 Vibration Isolators Row, and 1 New Row In response to Supplemental RAI OIN-382, the Vibration Isolators row of LRA Table 2.4-13, "Bulk Commodities Components Subject to Aging Management
Enclosure A L-11-292 Page 16 of 52 Table 3.3.2-14        Aging Management Review Results - Fire Protection System NUREG-Aging Effect        Aging Row    Component      Intended                                                                1801,  Table 1 Material    Environment  Requiring      Management                          Notes No.     Type      Function(s)                                                              Volume    Item Management        Program 2 Item Heat Exchanger (shell) - Fire Water                                    Air-indoor Storage Tank  Pressure                              Loss of      External Surfaces 24                                Steel      uncontrolled                                  VII.G-5  3.3.1-59 A Heat          boundary                              material      Monitoring (External)
Exchanger (DB-E52)
Not used.
Heat Exchanger (tubes) - Fire                                                      Collection, Water                                                              Drainage, and Storage Tank                Stainless  Raw water    Reduction in 25                  Heat transfer                                        Treatment          VII.G-7  3.3.1-83 E Heat                        Steel      (Internal)  heat transfer Components Exchanger                                                          Inspection (DB-E52)
Not used.
Heat Exchanger (tubes) - Fire Water Storage Tank                Stainless  Steam        Reduction in  PWR Water 26                  Heat transfer                                                          N/A      N/A      G Heat                        Steel      (External)  heat transfer Chemistry Exchanger (DB-E52)
Not used.


Review," is revised, and a new "Elastomeric Components" row is added to the
Enclosure A L-11-292 Page 17 of 52 Table 3.3.2-14        Aging Management Review Results - Fire Protection System NUREG-Aging Effect      Aging Row    Component      Intended                                                                1801,   Table 1 Material    Environment  Requiring      Management                          Notes No.      Type      Function(s)                                                              Volume    Item Management        Program 2 Item Heat Exchanger (tubes) - Fire Water Storage Tank                Stainless  Steam        Reduction in  One-Time                              G 27                  Heat transfer                                                          N/A      N/A Heat                        Steel      (External)  heat transfer Inspection                            0315 Exchanger (DB-E52)
Not used.
Heat Exchanger (tubesheet) -
Fire Water Storage Tank  Pressure                  Raw water    Loss of 28                                Steel                                  Fire Water        VII.G-24  3.3.1-68 C Heat          boundary                  (Internal)  material Exchanger (DB-E52)
Not used.
Heat Exchanger (tubesheet) -
Fire Water Storage Tank  Pressure                  Steam        Loss of      One-Time                              E 29                                Steel                                                    VIII.B1-8 3.4.1-37 Heat          boundary                  (External)  material      Inspection                            0315 Exchanger (DB-E52)
Not used.


table, as follows: Component Type Intended Function (as defined in Table 2.0-1)
Enclosure A L-11-292 Page 18 of 52 Table 3.3.2-14        Aging Management Review Results - Fire Protection System NUREG-Aging Effect        Aging Row    Component      Intended                                                              1801,   Table 1 Material  Environment  Requiring      Management                          Notes No.      Type     Function(s)                                                            Volume    Item Management        Program 2 Item Heat Exchanger (tubesheet) -
Steel and Other Metals Vibration Isolators including elements SNS, SRE, SSR Elastomeric Components Vibration Isolators including elements SNS, SRE, SSR
Fire Water Storage Tank  Pressure                Steam        Loss of      PWR Water 30                              Steel                                                    VIII.B1-8 3.4.1-37 C Heat          boundary                (External)  material      Chemistry Exchanger (DB-E52)
Not used.
Pump Casing
      - Fire Water Storage Tank Recirculation Pressure      Gray Cast  Raw water    Loss of 77                                                                    Fire Water        VII.G-24  3.3.1-68 A Pump (DB-    boundary      Iron      (Internal)  material P114)
Not used.
Pump Casing
      - Fire Water Storage Tank Recirculation Pressure      Gray Cast  Raw water    Loss of      Selective Leaching 78                                                                                        VII.G-14  3.3.1-85 A Pump (DB-    boundary      Iron      (Internal)  material      Inspection P114)
Not used.


Enclosure A L-11-292 Page 9 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence3.1.2.2.13Page 3.1-11 New [last] sentence In response to Supplemental RAI Table 3.1.2-3, a new sentence is added to the end of LRA Section 3.1.2.2.13, "Cracking due to Primary Water Stress Corrosion
Enclosure A L-11-292 Page 19 of 52 Table 3.3.2-14        Aging Management Review Results - Fire Protection System NUREG-Aging Effect      Aging Row  Component      Intended                                                              1801,  Table 1 Material  Environment  Requiring      Management                          Notes No.       Type    Function(s)                                                            Volume    Item Management        Program 2 Item Pump Casing
      - Fire Water Storage Tank                          Air-indoor Recirculation Pressure      Gray Cast              Loss of      External Surfaces 79                                          uncontrolled                                  VII.I-8  3.3.1-58 A Pump (DB-    boundary      Iron                    material      Monitoring (External)
P114)
Not used.


Cracking (PWSCC)," and the section is revised to read: 3.1.2.2.13 Cracking due to Primary Water Stress Corrosion Cracking (PWSCC)Cracking due to PWSCC could occur in PWR components made with nickel alloy and steel with nickel alloy cladding exposed to reactor coolant. Cracking due to SCC (including PWSCC) in Davis-Besse PWR components made with nickel
Enclosure A L-11-292 Page 20 of 52 Affected LRA Section      LRA Page No.          Affected Paragraph and Sentence Table 3.3.2-26            Page 3.3-475          Row 83, Environment column In response to Supplemental RAI 3.2.2.2.3.6-2, the Environment column of row 83 of LRA Table 3.3.2-26, Aging Management Review Results - Service Water System, is revised as follows:
Table 3.3.2-26        Aging Management Review Results - Service Water System NUREG-Aging Effect Row    Component    Intended                                            Aging Management        1801,  Table 1 Material  Environment    Requiring                                          Notes No.       Type    Function(s)                                                Program          Volume 2   Item Management Item Pump Casing Inspection of Internal
      - Service                              Moist air Pressure                                Loss of      Surfaces in 83  water pump                  Steel      (External                                          N/A      N/A    G boundary                                material      Miscellaneous (DB-P3-1, 2,                          (Internal)
Piping and Ducting
      & 3)


alloy is managed by the Inservice Inspection Program, Nickel-Alloy Management  
Enclosure A L-11-292 Page 21 of 52 Affected LRA Section          LRA Page No.        Affected Paragraph and Sentence Table 3.3.2-27                Page 3.3-488        Row 38, Environment column In response to Supplemental RAI 3.2.2.2.3.6-2, the Environment column of row 38 of LRA Table 3.3.2-27, Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System, is revised as follows:
Table 3.3.2-27        Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System NUREG-Aging Effect Row  Component        Intended                                          Aging Management        1801,  Table 1 Material Environment    Requiring                                          Notes No.      Type        Function(s)                                              Program          Volume 2  Item Management Item Inspection of Internal Moist air Structural    Stainless              Loss of      Surfaces in 38  Piping                                  (External)                                        N/A      N/A    G integrity      Steel                  material      Miscellaneous (Internal)
Piping and Ducting


Program, and PWR Water Chemistry Program.
Enclosure A L-11-292 Page 22 of 52 Affected LRA Section        LRA Page No.        Affected Paragraph and Sentence 3.5.2.1.13                Page 3.5-18          New Aging Effects Requiring Management bullet In response to Supplemental RAI OIN-382, a new bullet is added to the Aging Effects Requiring Management subsection of LRA Section 3.5.2.1.13, Bulk Commodities, as follows:
Cracking due to SCC (including PWSCC) for small-bore piping nickel-alloy welds is also managed by the Small Bore Class 1 Piping Inspection Program.
Aging Effects Requiring Management The following aging effects associated with structural components of evaluated bulk commodities require management:
x  Change in material properties x  Cracking x  Delamination x  Loss of material x  Loss of preload x  Reduction or loss of isolation function x  Separation


Enclosure A L-11-292 Page 10 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 3.1.1Page 3.1-23 Row 3.1.1-31 "Discussion" column In response to Supplemental RAI Table 3.1.2-3, the text in the "Discussion" column for row 3.1.1-31 of LRA Table 3.1.1, "Summary of Aging Management Programs for Reactor Vessel, Internals, Reactor Coolant System and Reactor Coolant Pressure Boundary, and Steam Generators Evaluated in Chapter IV of NUREG-1801," is
Enclosure A L-11-292 Page 23 of 52 Affected LRA Section       LRA Page No.         Affected Paragraph and Sentence 3.5.2.2.2.6                Page 3.5-31         2nd Paragraph, 3rd sentence, and New bullet In response to Supplemental RAI OIN-382, the third sentence of the second paragraph is revised, and a new bullet is added to the end of the second paragraph list of supports in LRA Section 3.5.2.2.2.6, Aging of Supports Not Covered by Structures Monitoring Program, as follows:
Each of the following is within the scope of the Structures Monitoring Program.
Therefore, further evaluation is not required. In addition, loss of material due to corrosion for susceptible materials is managed by the Boric Acid Corrosion Program within areas that contain borated systems.
x  Building concrete around support anchorages x  HVAC duct supports x  Instrument supports x  Non-ASME mechanical equipment supports x  Non-ASME supports x  Electrical panels and enclosures x  Vibration isolators including elements


revised and now reads as follows: Table 3.1.1  Summary of Aging Management Programs for Reactor Vessel, Internals, Reactor Coolant System and Reactor Coolant Pressure Boundary, and Steam Generators Evaluated in Chapter IV of NUREG-1801 Item Number Component/Commodity Aging Effect/
Enclosure A L-11-292 Page 24 of 52 Affected LRA Section             LRA Page No.           Affected Paragraph and Sentence Table 3.5.1                       Page 3.5-53           Row 3.5.1-41, Discussion column In response to Supplemental RAI OIN-382, the Discussion column of row 3.5.1-41 of LRA Table 3.5.1, Summary of Aging Management Programs for Structures and Component Supports Evaluated in Chapters II and III of NUREG-1801, is revised as follows:
Mechanism Aging Management ProgramsFurther Evaluation RecommendedDiscussion 3.1.1-31 Nickel alloy and steel with nickel-alloy cladding piping, piping component, piping elements, penetrations, nozzles, safe ends, and welds (other than reactor vessel head); pressurizer heater sheaths, sleeves, diaphragm
Table 3.5.1 Summary of Aging Management Programs for Structures and Component Supports Evaluated in Chapters II and III of NUREG-1801 Further Item                                         Aging Effect/     Aging Management Component/Commodity                                                          Evaluation           Discussion Number                                          Mechanism              Programs Recommended 3.5.1-41 Vibration isolation elements     Reduction or loss     Structures Monitoring Yes, if not Not applicable.
 
of isolation          Program                within the Davis-Besse has not identified function/radiation                          scope of the non-metallic vibration isolator hardening,                                  applicants elements.
plate, manways and flanges; core support pads/core guide lugsCracking due to primary water stress corrosion cracking Inservice Inspection (IWB, IWC, and IWD) and Water Chemistry and FSAR supp
temperature,                                structures humidity, sustained                          monitoring  Consistent with NUREG-1801.
 
vibratory loading                            program The Structures Monitoring Program is credited for aging management of these effects and mechanisms.
commitment to implement applicable plant commitments to (1)
NRC Orders, Bulletins, and Generic Letters associated with nickel
 
alloys and (2) staff-accepted industry guidelines.
No, but licensee commitment needs to be confirmedConsistent with NUREG-1801. Cracking due to SCC (including PWSCC) in nickel alloy components is managed by the
 
Inservice Inspection Program, PWR Water Chemistry Program, and Nickel-Alloy Management Program.Cracking due to SCC (including PWSCC) for small-bore piping nickel-alloy welds is also managed by the Small Bore Class 1 Piping Inspection Program.Further evaluation is documented in Section 3.1.2.2.13.
Enclosure A L-11-292 Page 11 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 3.1.2-3Page 3.1-163 8 New Rows In response to Supplemental RAI Table 3.1.2-3, LRA Table 3.1.2-3, "Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System," is revised to add eight new rows as follows: Table 3.1.2-3 Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes-- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Cracking -
Fatigue TLAA IV.C2-25 3.1.1-08 A -- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Cracking -
Flaw Growth Inservice Inspection IV.C2-26 3.1.1-62 C  0102 0103 -- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Cracking -
PWSCC, SCC/IGA Inservice Inspection IV.C2-13 3.1.1-31 A  -- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Cracking -
PWSCC, SCC/IGA Nickel-Alloy Management IV.C2-13 3.1.1-31 A  0110 Enclosure A L-11-292 Page 12 of 52 Table 3.1.2-3 Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes-- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Cracking -
PWSCC, SCC/IGA PWR Water Chemistry IV.C2-13 3.1.1-31 A  -- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Cracking -
PWSCC, SCC/IGA Small Bore Class 1 Piping Inspection IV.C2-13 3.1.1-31 E -- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Borated reactor coolant (Internal)
Loss of Material PWR Water Chemistry IV.C2-15 3.1.1-83 A -- Piping <4 inches  RV flange leakage line tap weld Pressure boundary Nickel Alloy Air with borated water leakage (External)
None None IV.E-3 3.1.1-86 A 0103 Enclosure A L-11-292 Page 13 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence3.3.2.1.14Page 3.3-19 Aging Management Programs, 1 bulletIn response to RAI 3.3.2.14-1, the Aging Management Program subsection of Section 3.3.2.1.14, "Fire Protection System," is revised to delete the PWR Water
 
Chemistry Program as follows: PWR Water Chemistry Program
 
Enclosure A L-11-292 Page 14 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 3.3.2-14Pages 3.3-315 thru 3.3-323 Rows 20-30 and 77-79 In response to RAI 3.3.2.14-1, LRA Table 3.3.2-14, "Aging Management Review Results - Fire Protection System," previously replaced in its entirety in FENOC letter dated September 16, 2011 (ML11264A059), is revised to identify that rows 20-30 and 77-79 are "Not used," as these rows are no longer needed, and the rows now read as follows: Table 3.3.2-14 Aging Management Review Results - Fire Protection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 20 Heat Exchanger (channel)
- Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Air-indoor uncontrolled (External)
Loss of material External Surfaces Monitoring VII.G-5 3.3.1-59 A Enclosure A L-11-292 Page 15 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 21 Heat Exchanger (channel)
- Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Raw water (Internal)
Loss of material Fire Water VII.G-24 3.3.1-68 C  22 Heat Exchanger (shell) - Fire W ater Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Steam (Internal)
Loss of material One-Time Inspection VIII.B1-8 3.4.1-37 E 0315 23 Heat Exchanger (shell) - Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Steam (Internal)
Loss of material PWR Water Chemistry VIII.B1-8 3.4.1-37 C Enclosure A L-11-292 Page 16 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 24 Heat Exchanger (shell) - Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Air-indoor uncontrolled (External)
Loss of material External Surfaces Monitoring VII.G-5 3.3.1-59 A  25 Heat Exchanger (tubes) - Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Heat transfer Stainless Steel Raw water (Internal)
Reduction in heat transfer Collection, Drainage, and Treatment Components Inspection VII.G-7 3.3.1-83 E  26 Heat Exchanger (tubes) - Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Heat transfer Stainless Steel Steam (External)
Reduction in heat transfer PWR Water Chemistry N/A N/A G Enclosure A L-11-292 Page 17 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 27 Heat Exchanger (tubes) - Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Heat transfer Stainless Steel Steam (External)
Reduction in heat transfer One-Time Inspection N/A N/A G 0315  28 Heat Exchanger (tubesheet)
- Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Raw water (Internal)
Loss of material Fire Water VII.G-24 3.3.1-68 C  29 Heat Exchanger (tubesheet)
- Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Steam (External)
Loss of material One-Tim e Inspection VIII.B1-8 3.4.1-37 E 0315 Enclosure A L-11-292 Page 18 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 30 Heat Exchanger (tubesheet)
- Fire Water Storage Tank Heat Exchanger (DB-E52)Not used. Pressure boundary Steel Steam (External)
Loss of material PWR Water Chemistry VIII.B1-8 3.4.1-37 C  77Pump Casing
- Fire Wa ter Storage Tank Recirculation Pump (DB-P114)Not used. Pressure boundary Gray Cast Iron Raw water (Internal)
Loss of material Fire Water VII.G-24 3.3.1-68 A  78Pump Casing
- Fire Water Storage Tank Recirculation Pump (DB-P114)Not used. Pressure bound ary Gray Cast Iron Raw water (Internal)
Loss of material Selective Leaching Inspection VII.G-14 3.3.1-85 A Enclosure A L-11-292 Page 19 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 79Pump Casing
- Fire Water Storage Tank Recirculation Pump (DB-P114)Not used. Pressure boundary Gray Cast Iron Air-indoor uncontrolled (External) Loss of material External Surfaces Monitoring VII.I-8 3.3.1-58 A Enclosure A L-11-292 Page 20 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable 3.3.2-26Page 3.3-475 Row 83, "Environment" column In response to Supplemental RAI 3.2.2.2.3.6-2, the "Environment" column of row 83 of LRA Table 3.3.2-26, "Aging Management Review Results - Service Water System," is revised as follows: Table 3.3.2-26 Aging Management Review Results - Service Water System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement Aging Management ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 83Pump Casing
- Service water pump (DB-P3-1, 2, & 3) Pressure boundary Steel Moist air  (External (Internal)
Loss of materialInspection of Internal Surfaces in Miscellaneous Piping and Ducting N/A N/A G Enclosure A L-11-292 Page 21 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 3.3.2-27Page 3.3-488 Row 38, "Environment" column In response to Supplemental RAI 3.2.2.2.3.6-2, the "Environment" column of row 38 of LRA Table 3.3.2-27, "Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System," is revised as follows: Table 3.3.2-27 Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System Row No.Component Type Intended Function(s) Material Environment Aging Effect RequiringManagement Aging Management ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 38 Piping Structural integrity Stainless Steel Moist air  (External)
(Internal)
Loss of materialInspection of Internal Surfaces in Miscellaneous Piping and Ducting N/A N/A G Enclosure A L-11-292 Page 22 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence3.5.2.1.13Page 3.5-18 New "Aging Effects Requiring Management" bullet In response to Supplemental RAI OIN-382, a new bullet is added to the "Aging Effects Requiring Management" subsection of LRA Section 3.5.2.1.13, "Bulk
 
Commodities," as follows:
Aging Effects Requiring Management The following aging effects associated with structural components of evaluated bulk commodities require management:  Change in material properties  Cracking  Delamination  Loss of material  Loss of preload Reduction or loss of isolation function Separation Enclosure A L-11-292 Page 23 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence3.5.2.2.2.6Page 3.5-31 2 nd Paragraph, 3 rd sentence, and New bullet In response to Supplemental RAI OIN-382, the third sentence of the second paragraph is revised, and a new bullet is added to the end of the second paragraph list of supports in LRA Section 3.5.2.2.2.6, "Aging of Supports Not Covered by Structures Monitoring Program," as follows: Each of the following is within the scope of the Structures Monitoring Program.
Therefore, further evaluation is not required. In addition, loss of material due to corrosion for susceptible materials is managed by the Boric Acid Corrosion Program within areas that contain borated systems. Building concrete around support anchorages  HVAC duct supports  Instrument supports  Non-ASME mechanical equipment supports  Non-ASME supports  Electrical panels and enclosures Vibration isolators including elements
 
Enclosure A L-11-292 Page 24 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 3.5.1Page 3.5-53 Row 3.5.1-41, "Discussion" column In response to Supplemental RAI OIN-382, the "Discussion" column of row 3.5.1-41 of LRA Table 3.5.1, "Summary of Aging Management Programs for Structures and Component Supports Evaluated in Chapters II and III of  
 
NUREG-1801," is revised as follows: Table 3.5.1 Summary of Aging Management Programs for Structures and Component Supports Evaluated in Chapters II and III of NUREG-1801 Item Number Component/Commodity Aging Effect/
Mechanism Aging Management ProgramsFurther Evaluation Recommended Discussion 3.5.1-41 Vibration isolation elements Reduction or loss of isolation
 
function/radiation hardening, temperature,humidity, sustained vibratory loading Structures Monitoring Program Yes, if not within the
 
scope of the applicant's structures monitoring program Not applicable.
Davis-Besse has not identified non-metallic vibration isolator elements. Consistent with NUREG-1801.
The Structures Monitoring Program is credited for aging management of these effects and mechanisms.
Further evaluation is documented in Section 3.5.2.2.2.6.
Further evaluation is documented in Section 3.5.2.2.2.6.
Enclosure A L-11-292 Page 25 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 3.5.2-1Page 3.5-63 Row 5, "Notes" column In response to Supplemental RAI OIN-363, the "Notes" column of row 5 of LRA Table 3.5.2-1, "Aging Management Review Results - Containment," is revised to add new plant-specific note 0551, as follows: Table 3.5.2-1    Aging Management Review Results - Containment Row No.Component / Commodity Intended Function 1Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 5Containment Vessel EN, FLB, HELB, SHD, SPB, SRE, SSR Carbon SteelAir-indoor Loss of materialISI Program-IWE 10 CFR Part 50, Appendix J II.A2-9 3.5.1-06 A  0551 Enclosure A L-11-292 Page 26 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 3.5.2-12Page 3.5-113 2 New Rows In response to Supplemental RAI OIN-381, two new rows are added to LRA Table 3.5.2-12, "Aging Management Review Results - Yard Structures," as follows: Table 3.5.2-12 Aging Management Review Results - Yard Structures Row No.Component / Commodity Intended Function 1Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes--SBO Component Support Structure: Switchyard Towers for 345-kV Distribution SRE Carbon Steel Air-outdoor Loss of material Structures Monitoring III.A3-12 3.5.1-25 A  --SBO Component Support Structure: Yard Towers for 345-kV Distribution SRE Carbon Steel Air-outdoor Loss of material Structures Monitoring III.A3-12 3.5.1-25 A Enclosure A L-11-292 Page 27 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 3.5.2-13Page 3.5-113 Row 135, "Component Type" and "Intended Function" columns; and, New Row In response to Supplemental RAI OIN-382, the "Component / Commodity" and "Intended Function" columns of row 135 are revised, and a new row is added to LRA Table 3.5.2-13, "Aging Management Review Results - Bulk


Commodities," as follows: Table 3.5.2-13 Aging Management Review Results - Bulk Commodities Row No.Component / Commodity Intended Function 1Material Environment Aging Effect RequiringManagement AgingManagement ProgramNUREG-1801, Volume 2 Item Table 1 Item Notes 135 Vibration Isolators
Enclosure A L-11-292 Page 25 of 52 Affected LRA Section      LRA Page No.        Affected Paragraph and Sentence Table 3.5.2-1              Page 3.5-63          Row 5, Notes column In response to Supplemental RAI OIN-363, the Notes column of row 5 of LRA Table 3.5.2-1, Aging Management Review Results - Containment, is revised to add new plant-specific note 0551, as follows:
Table 3.5.2-1        Aging Management Review Results - Containment NUREG-Aging Effect        Aging Row   Component /   Intended                                                                 1801, Table 1 Material Environment      Requiring      Management                          Notes No. Commodity    Function1                                                              Volume 2   Item Management        Program Item EN, FLB,                                            ISI Program-IWE Containment  HELB, SHD,    Carbon                  Loss of                                            A 5                                        Air-indoor                                      II.A2-9  3.5.1-06 Vessel      SPB, SRE,    Steel                    material      10 CFR Part 50,                      0551 SSR                                                  Appendix J


including elements SNS, SRE, SSR Carbon SteelAir-indoor Loss of materialStructures Monitoring III.B2-10 3.5.1-39 A 
Enclosure A L-11-292 Page 26 of 52 Affected LRA Section        LRA Page No.         Affected Paragraph and Sentence Table 3.5.2-12              Page 3.5-113        2 New Rows In response to Supplemental RAI OIN-381, two new rows are added to LRA Table 3.5.2-12, Aging Management Review Results - Yard Structures, as follows:
--Vibration Isolators including elements SNS, SRE, SSR Elastomer Air-indoor Reduction or loss of isolation functionStructures Monitoring III.B4-12 3.5.1-41 A Enclosure A L-11-292 Page 28 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence Table 3.5.2 Plant-Specific NotesPage 3.5-172 New Note / Row In response to Supplemental RAI OIN-363, LRA Table 3.5.2, "Plant-Specific Notes," is revised to add a new plant-specific note as follows: Plant-Specific Notes:
Table 3.5.2-12      Aging Management Review Results - Yard Structures NUREG-Aging Effect        Aging Row  Component /    Intended                                                              1801,  Table 1 Material Environment    Requiring      Management                        Notes No. Commodity    Function1                                                            Volume 2    Item Management        Program Item SBO Component Support Structure:                   Carbon                  Loss of      Structures
0551 The 10 CFR 50 Appendix J Program manages aging of both the internal and external surfaces of the containment vessel.
  --                SRE                      Air-outdoor                                  III.A3-12 3.5.1-25 A Switchyard                  Steel                  material      Monitoring Towers for 345-kV Distribution SBO Component Support Carbon                  Loss of       Structures
  --  Structure:    SRE                      Air-outdoor                                  III.A3-12 3.5.1-25 A Steel                  material      Monitoring Yard Towers for 345-kV Distribution


Enclosure A L-11-292 Page 29 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 4.1-1 Page 4.1-4 New row In response to Supplemental RAI OIN-378, new LRA Section 4.7.7, "Crane Load Cycles," is added to LRA Table 4.1-1, "Time-Limited Aging Analyses," as follows: Table 4.1-1 Time-Limited Aging Analyses Results of TLAA Evaluation by Category 54.21(c)(1)
Enclosure A L-11-292 Page 27 of 52 Affected LRA Section       LRA Page No.         Affected Paragraph and Sentence Table 3.5.2-13              Page 3.5-113          Row 135, Component Type and Intended Function columns; and, New Row In response to Supplemental RAI OIN-382, the Component / Commodity and Intended Function columns of row 135 are revised, and a new row is added to LRA Table 3.5.2-13, Aging Management Review Results - Bulk Commodities, as follows:
Paragraph LRA SectionOther Plant-Specific Time-Limited Aging Analyses 4.7 Crane Load Cycles (i) 4.7.7 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable 4.1-2 Page 4.1-5 Fatigue analysis of the polar crane row In response to Supplemental RAI OIN-378, the "Fatigue analysis of the polar crane" row of LRA Table 4.1-2, "Review of Generic TLAAs Listed in
Table 3.5.2-13      Aging Management Review Results - Bulk Commodities NUREG-Aging Effect        Aging Row  Component /    Intended                                                            1801,  Table 1 Material Environment      Requiring    Management                    Notes No. Commodity    Function1                                                          Volume 2    Item Management        Program Item Vibration Isolators    SNS, SRE,    Carbon                    Loss of      Structures 135                                          Air-indoor                                III.B2-10 3.5.1-39 A including    SSR          Steel                    material      Monitoring elements Vibration                                            Reduction or Isolators    SNS, SRE,                              loss of      Structures
  --                              Elastomer  Air-indoor                                III.B4-12 3.5.1-41 A including    SSR                                    isolation    Monitoring elements                                              function


NUREG-1800," is revised as follows: Table 4.1-2 Review of Generic TLAAs Listed in NUREG-1800 NUREG-1800 Generic TLAAs Applicable to Davis-Besse (Y/N?)LRA SectionNUREG-1800, Table 4.1-3 Fatigue analysis of the polar crane No - No TLAA identified Yes 4.7.7 Enclosure A L-11-292 Page 30 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence4.3.2.3.2Pages 4.3-16 and 4.3-17 2 nd Paragraph, 2 nd Sentence In response to RAI 4.3.2.3.2 (Supplement), LRA Section 4.3.2.3.2, "Class 1 Valves Fatigue," previously replaced in its entirety in FENOC letter dated
Enclosure A L-11-292 Page 28 of 52 Affected LRA Section        LRA Page No.         Affected Paragraph and Sentence Table 3.5.2                 Page 3.5-172        New Note / Row Plant-Specific Notes In response to Supplemental RAI OIN-363, LRA Table 3.5.2, Plant-Specific Notes, is revised to add a new plant-specific note as follows:
Plant-Specific Notes:
0551    The 10 CFR 50 Appendix J Program manages aging of both the internal and external surfaces of the containment vessel.


July 22, 2011 (ML11208C274), second paragraph, is revised to read as follows:
Enclosure A L-11-292 Page 29 of 52 Affected LRA Section            LRA Page No. Affected Paragraph and Sentence Table 4.1-1                      Page 4.1-4      New row In response to Supplemental RAI OIN-378, new LRA Section 4.7.7, Crane Load Cycles, is added to LRA Table 4.1-1, Time-Limited Aging Analyses, as follows:
A search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves. Therefore, a commitment is provided in Appendix A to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis
Table 4.1-1 Time-Limited Aging Analyses 54.21(c)(1)    LRA Results of TLAA Evaluation by Category Paragraph    Section Other Plant-Specific Time-Limited Aging Analyses                              4.7 Crane Load Cycles                                            (i)          4.7.7 Affected LRA Section            LRA Page No. Affected Paragraph and Sentence Table 4.1-2                      Page 4.1-5      Fatigue analysis of the polar crane row In response to Supplemental RAI OIN-378, the Fatigue analysis of the polar crane row of LRA Table 4.1-2, Review of Generic TLAAs Listed in NUREG-1800, is revised as follows:
-Besse Class 1 valves greater than 4 inches diameter nominal pipe size. The issue of missing records has been documented in the Davis-Besse Corrective Action Program for resolution.
Table 4.1-2 Review of Generic TLAAs Listed in NUREG-1800 Applicable to Davis-Besse        LRA NUREG-1800 Generic TLAAs (Y/N?)                Section NUREG-1800, Table 4.1-3 No - No TLAA identified Fatigue analysis of the polar crane                                                  4.7.7 Yes
Affected LRA SectionLRA Page No. Affected Paragraph and Sentence4.3.3.2Page 4.3-23 1 st Bulleted Item - both paragraphs In response to RAI 3.3.2.14-1, the first bulleted item on LRA page 4.3-23 in LRA Section 4.3.3.2, "Non-Class 1 Major Components," is deleted in its


entirety as follows: The fire water storage tank heat exchanger is the only non
Enclosure A L-11-292 Page 30 of 52 Affected LRA Section        LRA Page No.          Affected Paragraph and Sentence 4.3.2.3.2                    Pages 4.3-16          2nd Paragraph, 2nd Sentence and 4.3-17 In response to RAI 4.3.2.3.2 (Supplement), LRA Section 4.3.2.3.2, Class 1 Valves Fatigue, previously replaced in its entirety in FENOC letter dated July 22, 2011 (ML11208C274), second paragraph, is revised to read as follows:
-piping component within the evaluation boundaries of the Fire Protection System that exceeds the fatigue threshold temperature. This heat exchanger was fabricated in accordance with ASME Section VIII Division 1.
A search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves. Therefore, a commitment is provided in Appendix A to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves greater than 4 inches diameter nominal pipe size. The issue of missing records has been documented in the Davis-Besse Corrective Action Program for resolution.
No fatigue analysis exists for the fire water storage tank heat e xchanger, and therefore, there is no TLAA related to fatigue. This component requires no further fatigue evaluation for the period of extended operation.
Affected LRA Section        LRA Page No.          Affected Paragraph and Sentence 4.3.3.2                      Page 4.3-23          1st Bulleted Item - both paragraphs In response to RAI 3.3.2.14-1, the first bulleted item on LRA page 4.3-23 in LRA Section 4.3.3.2, Non-Class 1 Major Components, is deleted in its entirety as follows:
x    The fire water storage tank heat exchanger is the only non-piping component within the evaluation boundaries of the Fire Protection System that exceeds the fatigue threshold temperature. This heat exchanger was fabricated in accordance with ASME Section VIII Division 1.
No fatigue analysis exists for the fire water storage tank heat exchanger, and therefore, there is no TLAA related to fatigue. This component requires no further fatigue evaluation for the period of extended operation.


Enclosure A L-11-292 Page 31 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence4.6.1Page 4.6-1 Second paragraph In response to Supplemental RAI 4.6-1, LRA Section 4.6.1, "Containment Vessel," second paragraph, is revised to read as follows:
Enclosure A L-11-292 Page 31 of 52 Affected LRA Section       LRA Page No.       Affected Paragraph and Sentence 4.6.1                      Page 4.6-1         Second paragraph In response to Supplemental RAI 4.6-1, LRA Section 4.6.1, Containment Vessel, second paragraph, is revised to read as follows:
4.6.1 CONTAINMENT VESSELThe containment vessel is a cylindrical steel pressure vessel with hemispherical dome and ellipsoidal bottom which houses the reactor vessel, reactor coolant piping, pressurizer, pressurizer quench tank and coolers, reactor coolant pumps, steam generators, core flooding tanks, letdown coolers, and normal ventilating system. The containment vessel is a Class B vessel as defined in the ASME Section III, Paragraph N-132, 1968 Edition through Summer 1969 Addenda. The containment vessel is designed to resist dead loads, LOCA loads, operating loads, external pressure load, temperature and pressure, impingement force and missiles, wind loads, seismic loads, gravity loads, and live loads. The containment vessel meets the requirements of ASME Section III, Paragraph N-415.1; thereby justifying the exclusion of cyclic or fatigue analyses in the design of the containment vessel. Analysis of 400 pressure cycles (from -0.67 psig to 45 psig
4.6.1     CONTAINMENT VESSEL The containment vessel is a cylindrical steel pressure vessel with hemispherical dome and ellipsoidal bottom which houses the reactor vessel, reactor coolant piping, pressurizer, pressurizer quench tank and coolers, reactor coolant pumps, steam generators, core flooding tanks, letdown coolers, and normal ventilating system. The containment vessel is a Class B vessel as defined in the ASME Section III, Paragraph N-132, 1968 Edition through Summer 1969 Addenda.
) and 400 temperature cycles (from 30&deg;F to 120&deg;F) were performed against the requirements of ASME Section III, Paragraph N-415.1. The 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation. Details of the ASME Section III, Paragraph N-415 analysis are as follows.
The containment vessel is designed to resist dead loads, LOCA loads, operating loads, external pressure load, temperature and pressure, impingement force and missiles, wind loads, seismic loads, gravity loads, and live loads. The containment vessel meets the requirements of ASME Section III, Paragraph N-415.1; thereby justifying the exclusion of cyclic or fatigue analyses in the design of the containment vessel. Analysis of 400 pressure cycles (from -0.67 psig to 45 psig) and 400 temperature cycles (from 30&deg;F to 120&deg;F) were performed against the requirements of ASME Section III, Paragraph N-415.1. The 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation. Details of the ASME Section III, Paragraph N-415 analysis are as follows.
N-415.1(a)
N-415.1(a)
The number of times (including startup and shutdown) that the pressure will be cycled from atmospheric pressure to operating pressure and back to atmospheric pressure must not exceed the number of cycles on Figure N-415(A) corresponding to an S a value of 3 times S
The number of times (including startup and shutdown) that the pressure will be cycled from atmospheric pressure to operating pressure and back to atmospheric pressure must not exceed the number of cycles on Figure N-415(A) corresponding to an Sa value of 3 times Sm.
: m. 3 S m is equal to 56,250 psi and from Figure N-415(A) the corresponding number of cycles is equal to 1,800. The specified number of 400 pressure cycles is less than the 1,800 cycles from Figure N-415(A). Therefore, the condition in N-415.1(a) is met.
3 Sm is equal to 56,250 psi and from Figure N-415(A) the corresponding number of cycles is equal to 1,800. The specified number of 400 pressure cycles is less than the 1,800 cycles from Figure N-415(A). Therefore, the condition in N-415.1(a) is met.


Enclosure A L-11-292 Page 32 of 52 N-415.1(b)
Enclosure A L-11-292 Page 32 of 52 N-415.1(b)
Specified full range of pressure fluctuations may not exceed the quantity 1/3 x design pressure x S a/S m. S a is the value from Figure N-415(A) for 400 cycles.
Specified full range of pressure fluctuations may not exceed the quantity 1/3 x design pressure x Sa/Sm. Sa is the value from Figure N-415(A) for 400 cycles.
1/3 x 36 x 125,000/18,750 = 80 psi Specified full range of pressure fluctuations is 45 psi (-25 to 20 psi) and is less than 80 psi. Therefore, the condition in N-415.1(b) is met.
1/3 x 36 x 125,000/18,750 = 80 psi Specified full range of pressure fluctuations is 45 psi (-25 to 20 psi) and is less than 80 psi. Therefore, the condition in N-415.1(b) is met.1 N-415.1(c)
1 N-415.1(c)
The temperature difference in degrees F between any two adjacent points during normal operation and during startup and shutdown must not exceed Sa/(2E).
The temperature difference in degrees F between any two adjacent points during normal operation and during startup and shutdown must not exceed S a/( For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 10 6)(6.07 x 10
For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =
-6) = 358&deg;F. Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F. Therefore, the condition in N-415.1(c) is met.
358&deg;F.
Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F.
Therefore, the condition in N-415.1(c) is met.
N-415.1(d)
N-415.1(d)
The temperature difference in degrees F between any two adjacent points does not change during normal operation by more than S a For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 10 6)(6.07 x 10
The temperature difference in degrees F between any two adjacent points does not change during normal operation by more than Sa/(2E).
-6) = 358&deg;F Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F. Therefore, the condition in N-415.1(d) is met.
For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =
358&deg;F Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F.
Therefore, the condition in N-415.1(d) is met.
1 The pressure cycle range used in the fatigue waiver evaluation is from -25 to 20 psi for a full range pressure fluctuation of 45 psi. However, the possible full range pressure fluctuation is from -0.67 to 45 psig based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). This adjusted full range pressure fluctuation of 45.67 psi is less than the 80 psi value determined in N-415.1(b) above. Therefore, the condition in N-415.1(b) is met.
1 The pressure cycle range used in the fatigue waiver evaluation is from -25 to 20 psi for a full range pressure fluctuation of 45 psi. However, the possible full range pressure fluctuation is from -0.67 to 45 psig based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). This adjusted full range pressure fluctuation of 45.67 psi is less than the 80 psi value determined in N-415.1(b) above. Therefore, the condition in N-415.1(b) is met.
The 60-year projected cycles for plant heatup and cooldown are 128 (shown in Table 4.3-1) and are less than the specified 400 pressure cycles and 400  
The 60-year projected cycles for plant heatup and cooldown are 128 (shown in Table 4.3-1) and are less than the specified 400 pressure cycles and 400 temperature cycles. Therefore, the values of 400 pressure and temperature cycles used to exclude fatigue analyses will not be exceeded for 60 years of
 
temperature cycles. Therefore, the values of 400 pressure and temperature cycles used to exclude fatigue analyses will not be exceeded for 60 years of Enclosure A L-11-292 Page 33 of 52 operation. Thus, the TLAAs associated with exclusion of fatigue analyses for the containment vessel will remain valid for the period of extended operation.
Disposition: 10 CFR 54.21(c)(1)(i) The TLAAs excluding the containment vessel from fatigue analysis per ASME


Section III, Paragraph N415-1 will  
Enclosure A L-11-292 Page 33 of 52 operation. Thus, the TLAAs associated with exclusion of fatigue analyses for the containment vessel will remain valid for the period of extended operation.
Disposition: 10 CFR 54.21(c)(1)(i)        The TLAAs excluding the containment vessel from fatigue analysis per ASME Section III, Paragraph N415-1 will remain valid through the period of extended operation.


remain valid through the period of
Enclosure A L-11-292 Page 34 of 52 Affected LRA Section        LRA Page No.       Affected Paragraph and Sentence 4.7.7                      Page 4.7-6         New Section In response to Supplemental RAI OIN-378, new LRA Section 4.7.7, Crane Load Cycles, is added as follows:
 
4.7.7     CRANE LOAD CYCLES The load cycle limits for cranes was identified as a potential TLAA. The following Davis-Besse cranes are in the scope of License Renewal and have been identified as having a TLAA, which requires evaluation for 60 years:
extended operation.
Enclosure A L-11-292 Page 34 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence4.7.7Page 4.7-6 New Section In response to Supplemental RAI OIN-378, new LRA Section 4.7.7, "Crane Load Cycles," is added as follows:
4.7.7 CRANE L OAD CYCLESThe load cycle limits for cranes was identified as a potential TLAA. The following Davis-Besse cranes are in the scope of License Renewal and have been identified as having a TLAA, which requires evaluation for 60 years:
* containment polar crane (including auxiliary hoist)
* containment polar crane (including auxiliary hoist)
* reactor service crane
* reactor service crane
* spent fuel shipping cask crane (including auxiliary hoist)
* spent fuel shipping cask crane (including auxiliary hoist)
* intake structure gantry crane These cranes are designed in accordance with Bechtel design specifications. These specifications require that the cranes shall be designed in accordance with the minimum requirements for Class A cranes as stated in Crane Manufacturers Association of America (CMAA) Specification 70 for Electric Overhead Traveling Cranes, except as the requirements are extended by the Bechtel specification; and, in the case of conflict, that the more stringent requirements shall govern. Class A cranes are designed for up to 100,000 load cycles.
* intake structure gantry crane These cranes are designed in accordance with Bechtel design specifications.
These specifications require that the cranes shall be designed in accordance with the minimum requirements for Class A cranes as stated in Crane Manufacturers Association of America (CMAA) Specification 70 for Electric Overhead Traveling Cranes, except as the requirements are extended by the Bechtel specification; and, in the case of conflict, that the more stringent requirements shall govern.
Class A cranes are designed for up to 100,000 load cycles.
Containment Polar Crane (including Auxiliary Hoist)
Containment Polar Crane (including Auxiliary Hoist)
The estimated number of cycles for 60 years of operation is bounded by 22,000 cycles. Less than 500 cycles are due to the main hoist with the remaining cycles due to the auxiliary hoist. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 22,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the containment polar crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
The estimated number of cycles for 60 years of operation is bounded by 22,000 cycles. Less than 500 cycles are due to the main hoist with the remaining cycles due to the auxiliary hoist. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 22,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the containment polar crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
Reactor Service Crane The estimated number of cycles for 60 years of operation is bounded by 8,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages Enclosure A L-11-292 Page 35 of 52 with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 8,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the reactor service crane load cycle assumption remains valid for the period of extended operation.
Reactor Service Crane The estimated number of cycles for 60 years of operation is bounded by 8,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages
 
Enclosure A L-11-292 Page 35 of 52 with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 8,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the reactor service crane load cycle assumption remains valid for the period of extended operation.
Spent Fuel Shipping Cask Crane (including Auxiliary Hoist)
Spent Fuel Shipping Cask Crane (including Auxiliary Hoist)
The estimated number of cycles for 60 years of operation is bounded by 18,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 18,000 cycles. Also, 3,600 cycles are estimated for crane usage during non-outage periods and are included in the estimate of 18,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the spent fuel shipping cask crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
The estimated number of cycles for 60 years of operation is bounded by 18,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 18,000 cycles. Also, 3,600 cycles are estimated for crane usage during non-outage periods and are included in the estimate of 18,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the spent fuel shipping cask crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
Intake Structure Gantry Crane The estimated number of cycles for 60 years of operation is bounded by 1,700 cycles. The rate of occurrence is based on crane usage through out the calendar year at 20 cycles per year. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 1,700 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the intake structure gantry crane load cycle assumption remains valid for the period of extended operation.
Intake Structure Gantry Crane The estimated number of cycles for 60 years of operation is bounded by 1,700 cycles. The rate of occurrence is based on crane usage through out the calendar year at 20 cycles per year. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 1,700 cycles.
Disposition: 10 CFR 54.21(c)(1)(i) Crane load assumptions remain valid for the period of extended operation.
Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the intake structure gantry crane load cycle assumption remains valid for the period of extended operation.
Disposition: 10 CFR 54.21(c)(1)(i)         Crane load assumptions remain valid for the period of extended operation.


Enclosure A L-11-292 Page 36 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and Sentence Appendix A Table of ContentsPage A-5 New Row In response to Supplemental RAI OIN-378, the Appendix A Table of Contents is revised to add new LRA Section A.2.7.6, "Crane Load Cycles," as follows:
Enclosure A L-11-292 Page 36 of 52 Affected LRA Section        LRA Page No.           Affected Paragraph and Sentence Appendix A                 Page A-5               New Row Table of Contents In response to Supplemental RAI OIN-378, the Appendix A Table of Contents is revised to add new LRA Section A.2.7.6, Crane Load Cycles, as follows:
A.2.7.6 C RANE L OAD C YCLES........................................................................A-50 Affected LRA Section LRA Page No. Affected Paragraph and SentenceA.1.22Page A-17 First paragraph In response to Supplemental RAI B.2.22-7, the first paragraph of LRA Section A.1.22, "Inservice Inspection (ISI) Program - IWE," previously revised in FENOC letter dated August 17, 2011 (ML11231A966), is split into two paragraphs and  
A.2.7.6   CRANE LOAD CYCLES ........................................................................A-50 Affected LRA Section       LRA Page No.           Affected Paragraph and Sentence A.1.22                      Page A-17             First paragraph In response to Supplemental RAI B.2.22-7, the first paragraph of LRA Section A.1.22, Inservice Inspection (ISI) Program - IWE, previously revised in FENOC letter dated August 17, 2011 (ML11231A966), is split into two paragraphs and revised to read as follows:
 
A.1.22 INSERVICE INSPECTION (ISI) PROGRAM - IWE The Inservice Inspection (ISI) Program - IWE establishes responsibilities and requirements for conducting ASME Code, Section XI, Subsection IWE (IWE) inspections as required by 10 CFR 50.55a. The Inservice Inspection (ISI)
revised to read as follows:
Program - IWE includes examination and testing of accessible surface areas of the steel containment; containment hatches and airlocks; seals, gaskets and moisture barriers; and containment pressure-retaining bolting in accordance with the requirements of IWE.
A.1.22 INSERVICE INSPECTION (ISI)P ROGRAM -IWE The Inservice Inspection (ISI) Program - IWE establishes responsibilities and  
The program will includes surface examinations to monitor for cracking of containment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size includes 10 percent
 
requirements for conducting ASME Code, Section XI, Subsection IWE (IWE) inspections as required by 10 CFR 50.55a. The Inservice Inspection (ISI)
Program - IWE includes examination and testing of accessible surface areas of the steel containment; containment hatches and airlocks; seals, gaskets and moisture barriers; and containment pressure-retaining bolting in accordance with  
 
the requirements of IWE. The program will includes surface examinations to monitor for cracking of containment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size includes 10 percent


Enclosure A L-11-292 Page 37 of 52 of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. In addition, the 10 CFR Part 50 Appendix J Program provides for verification that a general visual inspection of the accessible interior and exterior surfaces of the primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.
Enclosure A L-11-292 Page 37 of 52 of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. In addition, the 10 CFR Part 50 Appendix J Program provides for verification that a general visual inspection of the accessible interior and exterior surfaces of the primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.
Affected LRA SectionLRA Page No. Affected Paragraph and SentenceA.2.3.2.13Page A-41 2 nd Paragraph, 2 nd Sentence In response to RAI 4.3.2.3.2 (Supplement), LRA Section A.2.3.2.13, "Class 1 Valves Fatigue," previously added in FENOC letter dated July 22, 2011 (ML11208C274), second paragraph, is revised to read as follows:
Affected LRA Section        LRA Page No.         Affected Paragraph and Sentence A.2.3.2.13                  Page A-41           2nd Paragraph, 2nd Sentence In response to RAI 4.3.2.3.2 (Supplement), LRA Section A.2.3.2.13, Class 1 Valves Fatigue, previously added in FENOC letter dated July 22, 2011 (ML11208C274), second paragraph, is revised to read as follows:
A search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves. Therefore, a commitment is provided in Table A
A search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves. Therefore, a commitment is provided in Table A-1 of this Appendix to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves greater than 4 inches diameter nominal pipe size. The issue of missing records has been documented in the Davis-Besse Corrective Action Program for resolution.
-1 of this Appendix to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis
-Besse Class 1 valves greater than 4 inches diameter nominal pipe size.
The issue of missing records has been documented in the Davis-Besse Corrective Action Program for resolution.
Enclosure A L-11-292 Page 38 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceA.2.5.1Pages A-44 &            A-45 Entire section In response to Supplemental RAI 4.6-1, LRA Section A.2.5.1, "Containment Vessel," is revised to read as follows: A.2.5.1 Containment Vessel The containment vessel is a Class B vessel as defined in the ASME Section III, Paragraph N-132, 1968 Edition through Summer Addenda 1969. The
 
containment vessel meets the requirements for Paragraph N-415.1 of ASME Section III, thereby justifying the exclusion of cyclic or fatigue analyses in the


design of the containment vessel. Analysis of 400 pressure cycles (from -0.67 psig to 45 psig) and 400 temperature cycles (from 30&deg;F to 120&deg;F) were performed against the requirements of ASME Section III, Paragraph N-415.1. The 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation. Details of the ASME Section III, Paragraph N-415 analysis are as follows.
Enclosure A L-11-292 Page 38 of 52 Affected LRA Section        LRA Page No.        Affected Paragraph and Sentence A.2.5.1                      Pages A-44 &        Entire section A-45 In response to Supplemental RAI 4.6-1, LRA Section A.2.5.1, Containment Vessel, is revised to read as follows:
A.2.5.1    Containment Vessel The containment vessel is a Class B vessel as defined in the ASME Section III, Paragraph N-132, 1968 Edition through Summer Addenda 1969. The containment vessel meets the requirements for Paragraph N-415.1 of ASME Section III, thereby justifying the exclusion of cyclic or fatigue analyses in the design of the containment vessel. Analysis of 400 pressure cycles (from -0.67 psig to 45 psig) and 400 temperature cycles (from 30&deg;F to 120&deg;F) were performed against the requirements of ASME Section III, Paragraph N-415.1. The 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation. Details of the ASME Section III, Paragraph N-415 analysis are as follows.
N-415.1(a)
N-415.1(a)
The number of times (including startup and shutdown) that the pressure will be cycled from atmospheric pressure to operating pressure and back to atmospheric pressure must not exceed the number of cycles on Figure N-415(A) corresponding to an S a value of 3 times S
The number of times (including startup and shutdown) that the pressure will be cycled from atmospheric pressure to operating pressure and back to atmospheric pressure must not exceed the number of cycles on Figure N-415(A) corresponding to an Sa value of 3 times Sm.
: m. 3 S m is equal to 56,250 psi and from Figure N-415(A) the corresponding number of cycles is equal to 1,800. The specified number of 400 pressure cycles is less than the 1,800 cycles from Figure N-415(A). Therefore, the condition in N-415.1(a) is met.
3 Sm is equal to 56,250 psi and from Figure N-415(A) the corresponding number of cycles is equal to 1,800. The specified number of 400 pressure cycles is less than the 1,800 cycles from Figure N-415(A). Therefore, the condition in N-415.1(a) is met.
N-415.1(b)
N-415.1(b)
Specified full range of pressure fluctuations may not exceed the quantity 1/3 x design pressure x S a/S m. S a is the value from Figure N-415(A) for 400 cycles.
Specified full range of pressure fluctuations may not exceed the quantity 1/3 x design pressure x Sa/Sm. Sa is the value from Figure N-415(A) for 400 cycles.
1/3 x 36 x 125,000/18,750 = 80 psi Specified full range of pressure fluctuations is 45 psi (-25 to 20 psi) and is less than 80 psi. Therefore, the condition in N-415.1(b) is met.
1/3 x 36 x 125,000/18,750 = 80 psi Specified full range of pressure fluctuations is 45 psi (-25 to 20 psi) and is less than 80 psi. Therefore, the condition in N-415.1(b) is met.1
1 Enclosure A L-11-292 Page 39 of 52 N-415.1(c)
 
The temperature difference in degrees F between any two adjacent points during normal operation and during startup and shutdown must not exceed S a/( For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 10 6)(6.07 x 10
Enclosure A L-11-292 Page 39 of 52 N-415.1(c)
-6) = 358&deg;F. Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F. Therefore, the condition in N-415.1(c) is met.
The temperature difference in degrees F between any two adjacent points during normal operation and during startup and shutdown must not exceed Sa/(2E).
For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =
358&deg;F.
Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F.
Therefore, the condition in N-415.1(c) is met.
N-415.1(d)
N-415.1(d)
The temperature difference in degrees F between any two adjacent points does not change during normal operation by more than S a For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 10 6)(6.07 x 10
The temperature difference in degrees F between any two adjacent points does not change during normal operation by more than Sa/(2E).
-6) = 358&deg;F Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F. Therefore, the condition in N-415.1(d) is met.
For a mean temperature of 70&deg;F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =
358&deg;F Temperature cycle range of 90&deg;F (from 30&deg;F to 120&deg;F) is less than 358&deg;F.
Therefore, the condition in N-415.1(d) is met.
1 The pressure cycle range used in the fatigue waiver evaluation is from -25 to 20 psi for a full range pressure fluctuation of 45 psi. However, the possible full range pressure fluctuation is from -0.67 to 45 psig based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). This adjusted full range pressure fluctuation of 45.67 psi is less than the 80 psi value determined in N-415.1(b) above. Therefore, the condition in N-415.1(b) is met.
1 The pressure cycle range used in the fatigue waiver evaluation is from -25 to 20 psi for a full range pressure fluctuation of 45 psi. However, the possible full range pressure fluctuation is from -0.67 to 45 psig based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). This adjusted full range pressure fluctuation of 45.67 psi is less than the 80 psi value determined in N-415.1(b) above. Therefore, the condition in N-415.1(b) is met.
The 60-year projected cycles for plant heatup and cooldown are 128 (shown in Table 4.3-1) and are less than the specified 400 pressure cycles and 400 temperature cycles. Therefore, the values of 400 pressure cycles and 400 temperature cycles used to exclude fatigue analyses will not be exceeded for  
The 60-year projected cycles for plant heatup and cooldown are 128 (shown in Table 4.3-1) and are less than the specified 400 pressure cycles and 400 temperature cycles. Therefore, the values of 400 pressure cycles and 400 temperature cycles used to exclude fatigue analyses will not be exceeded for 60 years of operation.
The TLAA associated with exclusion of the containment vessel from fatigue analyses per ASME Section III, Paragraph N-415.1 remains valid for the period of extended operation in accordance with 10 CFR 54.21(c)(1)(i).


60 years of operation. The TLAA associated with exclusion of the containment vessel from fatigue analyses per ASME Section III, Paragraph N-415.1 remains valid for the period of extended operation in accordance with 10 CFR 54.21(c)(1)(i).
Enclosure A L-11-292 Page 40 of 52 Affected LRA Section        LRA Page No.         Affected Paragraph and Sentence A.2.7.6                      Page A-50             New Section In response to Supplemental RAI OIN-378, new LRA Section A.2.7.6, Crane Load Cycles, is added as follows:
Enclosure A L-11-292 Page 40 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceA.2.7.6Page A-50 New Section In response to Supplemental RAI OIN-378, new LRA Section A.2.7.6, "Crane Load Cycles," is added as follows: A.2.7.6 Crane Load CyclesThe load cycle limits for cranes was identified as a potential TLAA. The following Davis-Besse cranes are in the scope of License Renewal and have been identified as having a TLAA, which requires evaluation for 60 years:
A.2.7.6   Crane Load Cycles The load cycle limits for cranes was identified as a potential TLAA. The following Davis-Besse cranes are in the scope of License Renewal and have been identified as having a TLAA, which requires evaluation for 60 years:
* containment polar crane (including auxiliary hoist)
* containment polar crane (including auxiliary hoist)
* reactor service crane
* reactor service crane
* spent fuel shipping cask crane (including auxiliary hoist)
* spent fuel shipping cask crane (including auxiliary hoist)
* intake structure gantry crane These cranes are designed in accordance with Bechtel design specifications. These specifications require that the cranes shall be designed in accordance with the minimum requirements for Class A cranes as stated in Crane Manufacturers Association of America (CMAA) Specification 70 for Electric Overhead Traveling Cranes, except as the requirements are extended by the Bechtel specification; and, in the case of conflict, that the more stringent requirements shall govern. Class A cranes are designed for up to 100,000 load cycles.
* intake structure gantry crane These cranes are designed in accordance with Bechtel design specifications.
These specifications require that the cranes shall be designed in accordance with the minimum requirements for Class A cranes as stated in Crane Manufacturers Association of America (CMAA) Specification 70 for Electric Overhead Traveling Cranes, except as the requirements are extended by the Bechtel specification; and, in the case of conflict, that the more stringent requirements shall govern.
Class A cranes are designed for up to 100,000 load cycles.
Containment Polar Crane (including Auxiliary Hoist)
Containment Polar Crane (including Auxiliary Hoist)
The estimated number of cycles for 60 years of operation is bounded by 22,000 cycles. Less than 500 cycles are due to the main hoist with the remaining cycles due to the auxiliary hoist. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 22,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the containment polar crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
The estimated number of cycles for 60 years of operation is bounded by 22,000 cycles. Less than 500 cycles are due to the main hoist with the remaining cycles due to the auxiliary hoist. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 22,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the containment polar crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
Reactor Service Crane The estimated number of cycles for 60 years of operation is bounded by 8,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In Enclosure A L-11-292 Page 41 of 52 addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 8,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the reactor service crane load cycle assumption remains valid for the period of extended operation.
Reactor Service Crane The estimated number of cycles for 60 years of operation is bounded by 8,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In
 
Enclosure A L-11-292 Page 41 of 52 addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 8,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the reactor service crane load cycle assumption remains valid for the period of extended operation.
Spent Fuel Shipping Cask Crane (including Auxiliary Hoist)
Spent Fuel Shipping Cask Crane (including Auxiliary Hoist)
The estimated number of cycles for 60 years of operation is bounded by 18,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 18,000 cycles. Also, 3,600 cycles are estimated for crane usage during non-outage periods and are included in the estimate of 18,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the spent fuel shipping cask crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
The estimated number of cycles for 60 years of operation is bounded by 18,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 18,000 cycles. Also, 3,600 cycles are estimated for crane usage during non-outage periods and are included in the estimate of 18,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the spent fuel shipping cask crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.
Intake Structure Gantry Crane The estimated number of cycles for 60 years of operation is bounded by 1,700 cycles. The rate of occurrence is based on crane usage through out the calendar year at 20 cycles per year. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 1,700 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the intake structure gantry crane load cycle assumption remains valid for the period of extended operation.
Intake Structure Gantry Crane The estimated number of cycles for 60 years of operation is bounded by 1,700 cycles. The rate of occurrence is based on crane usage through out the calendar year at 20 cycles per year. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 1,700 cycles.
Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the intake structure gantry crane load cycle assumption remains valid for the period of extended operation.
Therefore, the crane load cycle assumptions remain valid for the period of extended operation in accordance with 10 CFR 54.21(c)(1)(i).
Therefore, the crane load cycle assumptions remain valid for the period of extended operation in accordance with 10 CFR 54.21(c)(1)(i).


Enclosure A L-11-292 Page 42 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable A-1Pages A-65     and A-69 Commitment No. 20, sixth bullet, and New Commitment 26 In response to Supplemental RAI B.2.39-11, a portion of the sixth bulleted item in license renewal future Commitment 20 in LRA Table A-1, "Davis-Besse License Renewal Commitments," is transferred to new license renewal future Commitment 26, which was previously revised to "Not used" in FENOC letter dated September 16, 2011 (ML11264A059),
Enclosure A L-11-292 Page 42 of 52 Affected LRA Section         LRA Page No.           Affected Paragraph and Sentence Table A-1                    Pages A-65             Commitment No. 20, sixth bullet, and and A-69            New Commitment 26 In response to Supplemental RAI B.2.39-11, a portion of the sixth bulleted item in license renewal future Commitment 20 in LRA Table A-1, Davis-Besse License Renewal Commitments, is transferred to new license renewal future Commitment 26, which was previously revised to Not used in FENOC letter dated September 16, 2011 (ML11264A059),
and the Implementation Schedule is revised from April 22, 2017, to December 31, 2014, as follows:
and the Implementation Schedule is revised from April 22, 2017, to December 31, 2014, as follows:
Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                                                         Implementation Commitment                                             Source   Section No./
Comments 20Obtain and evaluate for degradation a concrete core bore fr om two representative inaccessible concrete components of an in
Number                                                                            Schedule Comments 20    x  Obtain and evaluate for degradation a concrete core bore from        Prior to      LRA        A.1.39 two representative inaccessible concrete components of an in-     April 22, 2017    and        B.2.39 scope structure subjected to aggressive groundwater prior to entering the period of extended operation. Based on the results of the initial core bore sample, evaluate the need for collection                 FENOC    Responses to and evaluation of representative concrete core bore samples at                     Letters  NRC RAIs additional locations that may be identified during the period of                 L-11-153   B.2.39-3, extended operation as having aggressive groundwater                                  and      B.2.39-4, infiltration. Select additional core bore sample locations based                  L-11-237    B.2.39-5, on the duration of observed aggressive groundwater infiltration.                           B.2.39-6 and Perform an inspection for loss of material for carbon steel                                    B.2.39-7 structural components subject to aggressive groundwater.                                         from Require the use of the FENOC Corrective Action Program for                                   NRC Letter identified concrete or steel degradation.                                                       dated April 5, 2011,
-scope structure subjected to aggressive groundwater prior to entering the period of extended operation. Based on the results of the initial core bore sample, evaluate the need for collection and evaluation of representative concrete core bore samples at additional locations that may be identified during the period of extended operation as having aggressive groundwater infiltration. Select additional core bore sample locations based on the durat ion of observed aggressive groundwater infiltration. Perform an inspection for loss of material for carbon steel structural components subject to aggressive groundwater.
Require the use of the FENOC Corrective Action Program for identified concrete or steel degradation.
Prior to April 22, 2017 LRA and FENOC Letters L-11-153 and L-11-237 A.1.39 B.2.39Responses to NRC RAIs B.2.39-3, B.2.39-4, B.2.39-5, B.2.39-6 and B.2.39-7 from NRC Letter dated April 5, 2011, Enclosure A L-11-292 Page 43 of 52 Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Comments and RAIs B.2.39-11 and 3.5.2.3.12-4 from NRC Letter dated July 21, 2011 Enclosure A L-11-292 Page 44 of 52 Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Comments 26Obtain and evaluate for degradation a concrete core bore from two representative inaccessible concrete components of an in-scope structure subjected to aggressive groundwater prior to entering the period of extended operation. Based on the results of the initial core bore sample, evaluate the need for collection and evaluation of representative concrete core bore samples at additional locations that may be identified during the period of extended operation as having aggressive groundwater infiltration. Select additional core bore sample locations based on the duration of observed aggressive groundwater infiltration. Document identified concrete or steel degradation in the FENOC Corrective Action Program.
Not used. Prior to  December 31, 2014 FENOC Letters L-11-153, L-11-237, and L-11-257Responses to NRC RAI B.2.39-3 from NRC Letter dated April 5, 2011, RAI B.2.39-11 from NRC Letter dated July 21, 2011, and Supplemental RAI B.2.39-11 from telecon held with the NRC on September 13, 2011 Enclosure A L-11-292 Page 45 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable A-1Page A-68 Commitment No. 21, new bullet A new 7 th bulleted commitment is added to existing Commitment 21, Water Control Structures Inspection Enhancements, in response to Supplemental RAI OIN-379. LRA Table A-1, "Davis-Besse License Renewal


Commitments," Commitment 21, is revised to include the new commitment bullet, as follows:
Enclosure A L-11-292 Page 43 of 52 Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                       Implementation Commitment                                     Source Section No./
Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Number                                          Schedule Comments and RAIs B.2.39-11 and 3.5.2.3.12-4 from NRC Letter dated July 21, 2011
Comments 21Require that loose bolts and nuts, cracked high strength bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and codes, specifications or standards referenced in the Davis-Besse current licensing basis.
Prior to April 22, 2017 LRA FENOC Letters L-11-153 and L-11-292 A.1.40 B.2.40 Responses to NRC RAI B.2.39-6 from NRC Letter dated April 5, 2011, and Supplemental RAI OIN-379 from Region III 71002 Inspection


Enclosure A L-11-292 Page 46 of 52 Affected LRA SectionLRA Page No. Affected Paragraph and SentenceTable A-1Page A-69 Commitment No. 46 In response to RAI 4.3.2.3.2 (Supplement), license renewal future Commitment No. 46 previously added in FENOC letter dated July 22, 2011 (ML11208C274), is no longer needed and is revised to read "Not used,"
Enclosure A L-11-292 Page 44 of 52 Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                                                             Implementation Commitment                                                 Source   Section No./
as follows:
Number                                                                              Schedule Comments 26      Obtain and evaluate for degradation a concrete core bore from two          Prior to   FENOC    Responses to representative inaccessible concrete components of an in-scope          December 31,  Letters    NRC RAI structure subjected to aggressive groundwater prior to entering the         2014      L-11-153, B.2.39-3 from period of extended operation. Based on the results of the initial core                L-11-237,   NRC Letter bore sample, evaluate the need for collection and evaluation of                          and         dated representative concrete core bore samples at additional locations                    L-11-257  April 5, 2011, that may be identified during the period of extended operation as                              RAI B.2.39-11 having aggressive groundwater infiltration. Select additional core                                  from bore sample locations based on the duration of observed                                          NRC Letter aggressive groundwater infiltration. Document identified concrete or                                dated steel degradation in the FENOC Corrective Action Program.                                       July 21, 2011, and Supplemental Not used.                                                                                       RAI B.2.39-11 from telecon held with the NRC on September 13, 2011
Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Comments 46FENOC commits to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis
-Besse Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. Not used. Prior to April 22, 2015 LRA  FENOC Letter L-11-218 4.3.2.3.2 A.2.3.2.13 Response to NRC RAI 4.1
-1 from NRC Letter dated May 2, 2011


Enclosure A L-11-292 Page 47 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceTable A-1Page A-69 Commitment 47 License renewal future Commitment 47 is revised based on the response to Supplemental RAI B.2.22-7 regarding examination of Containment penetrations, and LRA Table A-1, "Davis-Besse License Renewal Commitments," is
Enclosure A L-11-292 Page 45 of 52 Affected LRA Section         LRA Page No.         Affected Paragraph and Sentence Table A-1                    Page A-68            Commitment No. 21, new bullet A new 7th bulleted commitment is added to existing Commitment 21, Water Control Structures Inspection Enhancements, in response to Supplemental RAI OIN-379. LRA Table A-1, Davis-Besse License Renewal Commitments, Commitment 21, is revised to include the new commitment bullet, as follows:
Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                                                            Implementation Commitment                                                Source  Section No./
Number                                                                              Schedule Comments 21      x  Require that loose bolts and nuts, cracked high strength bolts,      Prior to      LRA      A.1.40 and degradation of piles and sheeting (sheet pilings) are          April 22, 2017 B.2.40 accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based                     FENOC    Responses to on codes, specifications and standards such as American                            Letters  NRC RAI Institute of Steel Construction (AISC) specifications, Structural                L-11-153 B.2.39-6 from Engineering Institute / American Society of Civil Engineers                        and    NRC Letter (SEI/ASCE) 11, and codes, specifications or standards                            L-11-292    dated referenced in the Davis-Besse current licensing basis.                                    April 5, 2011, and Supplemental RAI OIN-379 from Region III 71002 Inspection


revised to read as follows:
Enclosure A L-11-292 Page 46 of 52 Affected LRA Section        LRA Page No.            Affected Paragraph and Sentence Table A-1                  Page A-69                Commitment No. 46 In response to RAI 4.3.2.3.2 (Supplement), license renewal future Commitment No. 46 previously added in FENOC letter dated July 22, 2011 (ML11208C274), is no longer needed and is revised to read Not used, as follows:
Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                                                           Implementation Commitment                                               Source   Section No./
Comments47 Enhance the Inservice Inspection (ISI) Program - IWE to: Include surface examinations to monitor for cracking of stainless steel Containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. Prior to April 22, 2017 LRA and FENOC Letters L-11-238 and L-11-292 A.1.22 B.2.22 Responses to NRC RAI B.2.22-7 from NRC Letter dated July 21, 2011, and Supplemental RAI B.2.22-7 from NRC Enclosure A L-11-292 Page 48 of 52 Table A-1 Davis-Besse License Renewal Commitments Item Number Commitment Implementation Schedule Source Related LRA Section No./
Number                                                                            Schedule Comments 46      FENOC commits to perform a fatigue evaluation in accordance with        Prior to       LRA      4.3.2.3.2 the requirements of the ASME Code of record for the Davis-Besse      April 22, 2015 A.2.3.2.13 Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29,                  FENOC    Response to CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and                             Letter NRC RAI 4.1-1 DH23.                                                                               L-11-218  from NRC Letter dated Not used.
CommentsTelecons on September 13 and 16, 2011
May 2, 2011


Enclosure A L-11-292 Page 49 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceB.2.12Page B-61 Detection of Aging Affects, 1 st Sentence In response to Supplemental RAI OIN-377, LRA Section B.2.12, "Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental
Enclosure A L-11-292 Page 47 of 52 Affected LRA Section         LRA Page No.           Affected Paragraph and Sentence Table A-1                    Page A-69              Commitment 47 License renewal future Commitment 47 is revised based on the response to Supplemental RAI B.2.22-7 regarding examination of Containment penetrations, and LRA Table A-1, Davis-Besse License Renewal Commitments, is revised to read as follows:
Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                                                            Implementation Commitment                                                Source  Section No./
Number                                                                              Schedule Comments 47      Enhance the Inservice Inspection (ISI) Program - IWE to:                  Prior to      LRA        A.1.22 April 22, 2017 x  Include surface examinations to monitor for cracking of stainless                  and        B.2.22 steel Containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The                        FENOC    Responses to inspection sample size will include 10 percent of the                              Letters    NRC RAI containment penetration population that are subject to cyclic                    L-11-238 B.2.22-7 from loading but have no current licensing basis fatigue analysis.                      and      NRC Letter Penetrations included in the inspection sample will be                            L-11-292      dated scheduled for examination in each 10-year ISI interval that                                July 21, 2011, occurs during the period of extended operation. Should fatigue                                  and analyses be performed in the future for the subject containment                            Supplemental penetrations, the surface examinations will no longer be                                    RAI B.2.22-7 required.                                                                                   from NRC


Qualification Requirements Program," Detection of Aging Effects paragraph, first sentence, is revised to read as follows:  Detection of Aging Effects As described above in Parameters Monitored or Inspected, the Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program provides for a visual inspection of a representative sample of all accessible electrical cables and connections located in adverse localized environments. The visual inspections will be performed on a 10-year interval, with the first inspection taking place within the 10-year period prior to the end of the current operating license. The
Enclosure A L-11-292 Page 48 of 52 Table A-1 Davis-Besse License Renewal Commitments Related LRA Item                                        Implementation Commitment                                      Source Section No./
Number                                          Schedule Comments Telecons on September 13 and 16, 2011


program will inspect the accessible cables and connections for aging effects due to adverse localized environments caused by heat, radiation, or moisture, in the presence of oxygen. The visible effects of aging are embrittlement, discoloration, cracking, and surface contamination. The visible evidence of aging (on the cable jackets and the connection insulating bases) is considered representative of aging to the cable insulation and the connection  
Enclosure A L-11-292 Page 49 of 52 Affected LRA Section        LRA Page No.      Affected Paragraph and Sentence B.2.12                      Page B-61          Detection of Aging Affects, 1st Sentence In response to Supplemental RAI OIN-377, LRA Section B.2.12, Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program, Detection of Aging Effects paragraph, first sentence, is revised to read as follows:
x  Detection of Aging Effects As described above in Parameters Monitored or Inspected, the Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program provides for a visual inspection of a representative sample of all accessible electrical cables and connections located in adverse localized environments. The visual inspections will be performed on a 10-year interval, with the first inspection taking place within the 10-year period prior to the end of the current operating license. The program will inspect the accessible cables and connections for aging effects due to adverse localized environments caused by heat, radiation, or moisture, in the presence of oxygen. The visible effects of aging are embrittlement, discoloration, cracking, and surface contamination. The visible evidence of aging (on the cable jackets and the connection insulating bases) is considered representative of aging to the cable insulation and the connection insulation.


insulation.
Enclosure A L-11-292 Page 50 of 52 Affected LRA Section         LRA Page No.       Affected Paragraph and Sentence B.2.22                        Page B-96           Program Description subsection, first paragraph; and, Enhancements subsection In response to Supplemental RAI B.2.22-7, LRA Section B.2.22, Inservice Inspection (ISI) Program - IWE, Program Description, previously revised in FENOC letter dated August 17, 2011 (ML11231A966), is revised to split the first paragraph of the Program Description into two paragraphs, and to add more detail to the Parameters Monitored and Inspected Enhancement, as follows:
Enclosure A L-11-292 Page 50 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceB.2.22Page B-96 Program Description subsection, first paragraph; and, Enhancements subsection In response to Supplemental RAI B.2.22-7, LRA Section B.2.22, "Inservice Inspection (ISI) Program - IWE," "Program Description," previously revised in  
B.2.22 INSERVICE INSPECTION (ISI) PROGRAM - IWE Program Description The Inservice Inspection (ISI) Program - IWE establishes responsibilities and requirements for conducting ASME Code Section XI, Subsection IWE inspections as required by 10 CFR 50.55a. The Inservice Inspection (ISI) Program - IWE includes examination and/or testing of accessible surface areas of the steel containment vessel; containment hatches and airlocks; seals, gaskets and moisture barriers; and containment pressure-retaining bolting. These examinations are in accordance with the requirements of the ASME Code, Section XI, 1995 Edition through the 1996 Addenda.
The program will include surface examinations to monitor for cracking of Ccontainment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. In addition, the 10 CFR Part 50 Appendix J Program provides for verification that a general visual inspection of the accessible interior and exterior surfaces of the primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.


FENOC letter dated August 17, 2011 (ML11231A966), is revised to split the first
Enclosure A L-11-292 Page 51 of 52 Enhancements The following enhancement will be implemented in the identified program element prior to the period of extended operation.
x  Parameters Monitored or Inspected The Inservice Inspection (ISI) Program - IWE will include surface examinations to monitor for cracking of Ccontainment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required.


paragraph of the "Program Description" into two paragraphs, and to add more detail to the Parameters Monitored and Inspected "Enhancement," as follows:
Enclosure A L-11-292 Page 52 of 52 Affected LRA Section         LRA Page No.         Affected Paragraph and Sentence B.2.40                      Page B-163           Enhancements - Acceptance Criteria, new [last] paragraph In response to Supplemental RAI OIN-379, LRA Section B.2.40, Water Control Structures Inspection, Enhancements - Acceptance Criteria subsection, is revised to include a new paragraph at the end of the section, as follows:
B.2.22 INSERVICE INSPECTION (ISI)P ROGRAM -IWE Program Description The Inservice Inspection (ISI) Program - IWE establishes responsibilities and requirements for conducting ASME Code Section XI, Subsection IWE inspections as required by 10 CFR 50.55a. The Inservice Inspection (ISI) Program - IWE includes examination and/or testing of accessible surface areas of the steel
The Structures Monitoring Program procedure, which implements the Water Control Structures Inspection, will be enhanced to require that loose bolts and nuts, cracked high strength bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and codes, specifications or standards referenced in the Davis-Besse current licensing basis.
 
containment vessel; containment hatches and airlocks; seals, gaskets and moisture barriers; and containment pressure-retaining bolting. These examinations are in accordance with the requirements of the ASME Code, Section XI, 1995 Edition through the 1996 Addenda. The program will include surface examinations to monitor for cracking of C containment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. In addition, the 10 CFR Part 50 Appendix J Program provides for verification that a general visual inspection of the accessible interior and exterior surfaces of the primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.
 
Enclosure A L-11-292 Page 51 of 52 EnhancementsThe following enhancement will be implemented in the identified program element prior to the period of extended operation. Parameters Monitored or Inspected The Inservice Inspection (ISI) Program - IWE will include surface examinations to monitor for cracking of C containment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required.
 
Enclosure A L-11-292 Page 52 of 52 Affected LRA Section LRA Page No. Affected Paragraph and SentenceB.2.40Page B-163 Enhancements - Acceptance Criteria, new [last] paragraph In response to Supplemental RAI OIN-379, LRA Section B.2.40, "Water Control Structures Inspection," "Enhancements" - "Acceptance Criteria" subsection, is  
 
revised to include a new paragraph at the end of the section, as follows: The Structures Monitoring Program procedure, which implements the Water Control Structures Inspection, will be enhanced to require that loose bolts and nuts, cracked high strength bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and codes, specifications or standards referenced in the Davis-Besse current licensing basis.


Enclosure B Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS)
Enclosure B Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS)
Letter L-11-292 Revised DBNPS License Renewal Application Boundary Drawing 1 page (not including this cover page) The following License Renewal Application Boundary Drawing is revised and is enclosed: LR Drawing LR-M0016A Revision 2 HIGHLIGHTINGCONTINUEDON
Letter L-11-292 Revised DBNPS License Renewal Application Boundary Drawing 1 page (not including this cover page)
 
The following License Renewal Application Boundary Drawing is revised and is enclosed:
LR-M269PLICENSERENEWALBOUNDARYDRAWINGLR-M016AREV.2SYSTEMSSHOWNONTHISDRAWING:12:FIREPROTECTION17:DIESELSLRNOTES:A.FORGENERALLICENSERENEWALNOTESREFERTOLR-M001-01.B.COMPONENTSHIGHLIGHTEDGREENONTHISDRAWINGAREINSCOPEFOR(A)(3)-FIREPROTECTION.THEMAINFLOWPATHS REQUIREDTOPERFORMTHE(A)(3)FUNCTION,ANDBRANCHLINES TOANDINCLUDINGTHEFIRSTVALVE,AREINSCOPE.
LR Drawing LR-M0016A           Revision 2
COMPONENTSTHATARENOTHIGHLIGHTEDARENOTLOCATED INSAFETY-RELATEDAREASWHERE(A)(2)-NSASCONSIDERATIONS AREACONCERN,ANDARETHEREFORENOTINSCOPE.C.THESPRINKLERSYSTEMINTHEDIESELFIREPUMPROOMISWITHINTHESCOPEOFLICENSERENEWAL.
17 12 12 17 12 17 HIGHLIGHTING CONTINUEDON


LR-M017CLRNOTEBLRNOTEC}}
12 17 17 12 12 17 HIGHLIGHTING CONTINUED ON LR-M017C LR NOTE B LR NOTE C HIGHLIGHTING CONTINUED ON LR-M269P LR NOTES:
A. FOR GENERAL LICENSE RENEWAL NOTES REFER TO LR-M001-01.
B. COMPONENTS HIGHLIGHTED GREEN ON THIS DRAWING ARE IN SCOPE FOR (A)(3)-FIRE PROTECTION. THE MAIN FLOW PATHS REQUIRED TO PERFORM THE (A)(3) FUNCTION, AND BRANCH LINES TO AND INCLUDING THE FIRST VALVE, ARE IN SCOPE.
COMPONENTS THAT ARE NOT HIGHLIGHTED ARE NOT LOCATED IN SAFETY-RELATED AREAS WHERE (A)(2)-NSAS CONSIDERATIONS ARE A CONCERN, AND ARE THEREFORE NOT IN SCOPE.
C. THE SPRINKLER SYSTEM IN THE DIESEL FIRE PUMP ROOM IS WITHIN THE SCOPE OF LICENSE RENEWAL.
LICENSE RENEWAL BOUNDARY DRAWING LR-M016A REV. 2 SYSTEMS SHOWN ON THIS DRAWING:
12: FIRE PROTECTION 17: DIESELS}}

Latest revision as of 13:08, 12 November 2019

2011/10/11 Davis-Besse Lr - FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses
ML11294A331
Person / Time
Site: Davis Besse Cleveland Electric icon.png
Issue date: 10/11/2011
From:
Office of Nuclear Reactor Regulation
To:
Division of License Renewal
References
Download: ML11294A331 (73)
v • d • e


Text

Davis-BesseNPEm Resource From: CuadradoDeJesus, Samuel Sent: Tuesday, October 11, 2011 10:13 AM To: dorts@firstenergycorp.com Cc: Davis-BesseHearingFile Resource

Subject:

FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Attachments: L-11-292 Amd 19 & RAIs B-9, OINs, Telecons_2011-10-07.pdf Got it. Thanks From: dorts@firstenergycorp.com [1]

Sent: Friday, October 07, 2011 12:48 PM To: CuadradoDeJesus, Samuel Cc: custerc@firstenergycorp.com

Subject:

FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Sam..... attached is FENOC Letter L-11-292 signed today (October 7, 2011), providing Davis-Besse License Renewal RAI Responses.

Please contact Cliff Custer (724-682-7139) or me with questions regarding the attached.

_____

Steve Dort DBNPS License Renewal 419.321.7662 work 412.974.3369 cell

The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.

1

Hearing Identifier: Davis_BesseLicenseRenewal_Saf_NonPublic Email Number: 1831 Mail Envelope Properties (377CB97DD54F0F4FAAC7E9FD88BCA6D0806D3ECBF0)

Subject:

FW: FENOC Letter L-11-292 Davis-Besse License Renewal RAI Responses Sent Date: 10/11/2011 10:13:01 AM Received Date: 10/11/2011 10:13:08 AM From: CuadradoDeJesus, Samuel Created By: Samuel.CuadradoDeJesus@nrc.gov Recipients:

"Davis-BesseHearingFile Resource" <Davis-BesseHearingFile.Resource@nrc.gov>

Tracking Status: None "dorts@firstenergycorp.com" <dorts@firstenergycorp.com>

Tracking Status: None Post Office: HQCLSTR01.nrc.gov Files Size Date & Time MESSAGE 1167 10/11/2011 10:13:08 AM L-11-292 Amd 19 & RAIs B-9, OINs, Telecons_2011-10-07.pdf 1337683 Options Priority: Standard Return Notification: No Reply Requested: No Sensitivity: Normal Expiration Date:

Recipients Received:

Davis-Besse Nuclear Power Station, Unit No. 1 L-11-292 Page 3 Attachments:

1. Reply to Request for Additional Information for the Review of the Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS), License Renewal Application, Sections 2.4, 3.1.2, 3.2.2, 3.3.2, 3.5.2, 4.3.2, 4.6, 4.7, B.2.12, B.2.22, B.2.39 and B.2.40
2. Regulatory Commitment List

Enclosures:

A. Amendment No. 19 to the DBNPS License Renewal Application B. Revised DBNPS License Renewal Application Boundary Drawing cc: NRC DLR Project Manager NRC Region III Administrator cc: w/o Attachment or Enclosure NRC DLR Director NRR DORL Project Manager NRC Resident Inspector Utility Radiological Safety Board

Attachment 1 L-11-292 Reply to Request for Additional Information for the Review of the Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS), License Renewal Application, Sections 2.4, 3.1.2, 3.2.2, 3.3.2, 3.5.2, 4.3.2, 4.6, 4.7, B.2.12, B.2.22, B.2.39 and B.2.40 Page 1 of 13 Section 4.3.2 Question RAI 4.3.2.3.2 (Supplement)

Background:

By letter dated June 22, 2011, the applicant responded to RAI 4.1-1 regarding cumulative usage factor (CUF) or It fatigue analyses for Class 1 valves. In its response to RAI 4.1-1, Request 1, Part A, the applicant identified 12 large bore Class 1 valves (i.e., valves with nominal pipe sizes in excess of 4-inches) that should have received CUF or It fatigue analyses in accordance with the design codes (i.e., 1971 or more recent Editions of the ASME Code Section III, or the 1968 Edition of the Draft ASME Pump and Valve Code for Nuclear Power Plants).

The applicant provided Commitment No. 46 to complete the following, prior to April 22, 2015:

FENOC commits to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves that are greater than 4 inches nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21, and DH23.

LRA Section 4.3.2.3.2, as amended by letter dated June 22, 2011, states that the fatigue analyses for these 12 referenced large bore Class 1 valves are as TLAAs and are dispositioned in accordance with Title 10 of the Code of Federal Regulations 54.21(c)(1)(iii), that the effects of fatigue on Class 1 valves greater than 4 inches diameter nominal pipe size will be managed for the period of extended operation by the Fatigue Monitoring Program. LRA Section 4.3.2.3.2 also states that the issue with the missing CUF or It calculations for the 12 referenced large bore Class 1 valves has been entered into the applicants Corrective Actions Program.

Issue:

The information provided by the applicant in letter of June 22, 2011, did not provide information regarding whether the applicant had any ASME Code,Section III NB-3222.4(d) fatigue waiver assessments (or equivalent waiver assessments permitted by the 1968 Draft ASME Pump and Valve Code) for the 12 large bore Class 1 valves referenced in Commitment No. 46. Therefore, the

L-11-292 Page 2 of 13 staff requests additional information regarding whether fatigue calculations are required for these valves.

The staff is concerned that without the CUF or It analyses or an appropriate fatigue waiver or exemption for these 12 large bore Class 1 valves, the staff would not be able to evaluate whether the aging effects will be appropriately managed by the commitment.

Request:

Provide justification for not having the analyses for staff review as part of the LRA, or provide your appropriate fatigue waiver or fatigue exemption bases for not having such analyses.

RESPONSE RAI 4.3.2.3.2 (Supplement)

As provided in FENOC letter dated July 22, 2011 (ML11208C274), a search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves, and the issue of missing records had been documented in the FENOC Corrective Action Program for resolution. In the July 22, 2011, letter, license renewal future Commitment 46 was provided in LRA Appendix A with an implementation date of prior to April 22, 2015, to perform a fatigue evaluation in accordance with the requirements of the ASME Code of Record for the Davis-Besse Class 1 valves greater than 4 inches diameter nominal pipe size.

However, to provide the fatigue evaluation in a timely manner to support development of the Davis-Besse license renewal safety evaluation, FENOC withdraws license renewal future Commitment 46 of LRA Appendix A, and instead provides a new regulatory commitment as follows:

FENOC will perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. LRA Sections 4.3.2.3.2 and A.2.3.2.13, both titled Class 1 Valves Fatigue, will be revised to include the results of the fatigue evaluations, and these changes will be submitted as an amendment to the Davis Besse LRA no later than May 31, 2012.

See Attachment 2 to this letter for the regulatory commitment.

See Enclosure A to this letter for the revision to the DBNPS LRA.

L-11-292 Page 3 of 13 Section 3.3.2 Question RAI 3.3.2.14-1

Background:

The GALL Report states that stainless steel components exposed to steam are susceptible to loss of material and stress corrosion cracking. In LRA Table 3.3.2-14, the fire water storage tank heat exchanger contains stainless steel tubes exposed to steam that are being managed for reduction in heat transfer.

However, the applicant has not identified loss of material or stress corrosion cracking as applicable aging effects, as discussed in the GALL Report.

Issue:

Even though the heat exchanger tubes license renewal function is heat transfer, both loss of material and stress corrosion cracking could affect the intended function. It is unclear to the staff why the applicant has not included both loss of material and stress corrosion cracking as applicable aging effects.

Request:

Justify why loss of material and stress corrosion cracking are not applicable aging effects for the fire water storage tank heat exchanger tubes exposed to steam. If it is determined that both loss of material and stress corrosion cracking are applicable, provide information on how these aging effects will be managed.

RESPONSE RAI 3.3.2.14-1 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI 3.3.2.14-1 submitted under FENOC letter dated August 26, 2011 (ML11242A166), and requested a revised response to the RAI.

FENOC replaces the previous response to RAI 3.3.2.14-1 in its entirety with the following information.

The fire water storage tank heat exchanger and recirculation pump are not within the scope of license renewal since the subject components do not satisfy the scoping criteria of 10 CFR 54.4(a)(1), (a)(2), or (a)(3). The heat exchanger and the recirculation pump are used to establish initial conditions associated with event assumptions, and perform no fire protection functions. Hence it is the monitoring of the Fire Water Storage Tank that is credited with ensuring the appropriate initial conditions and therefore, the heat exchanger and recirculation pump are not in the scope of License Renewal for the Fire Protection regulated event.

L-11-292 Page 4 of 13 The LRA is revised to delete information associated with the following components:

x Heat Exchanger (channel, shell, and tubesheet) - Fire water storage tank heat exchanger (DB-E52);

x Heat Exchanger (tubes) - Fire water storage tank heat exchanger (DB-E52); and, x Pump Casing - Fire water storage tank recirculation pump (DB-P114).

License Renewal Boundary Drawing LR-M016A, Station Fire Protection System, is revised to remove highlighting of the piping and components associated with the Fire Water Storage Tank Heat Exchanger (E52) and Fire Water Storage Tank Recirc Pump 1-1.

See Enclosure A to this letter for the revision to the DBNPS LRA.

See Enclosure B to this letter for the revision to the LRA Boundary Drawings.

Section 3.1.2 Supplemental Question RAI Table 3.1.2-3 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss whether an aging management review (AMR) row was missing for the reactor vessel flange leakage detection line. The NRC reviewer noted that a line item for the dissimilar metal weld was not readily identifiable.

SUPPLEMENTAL RESPONSE RAI TABLE 3.1.2-3 FENOC has confirmed that a nickel-alloy weld connects the flange leakage detection line to the reactor pressure vessel closure flange tap. Therefore, LRA Table 3.1.2-3, Aging Management Review Results - Reactor Coolant System and Reactor Coolant Pressure Boundary, is revised to provide a separate line item along with the aging management review results for the subject nickel-alloy weld.

See Enclosure A to this letter for the revision to the DBNPS LRA.

L-11-292 Page 5 of 13 Section 4.6 Supplemental Question RAI 4.6-1 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI 4.6-1 submitted under FENOC letter dated August 17, 2011 (ML11231A966).

Based on the telephone conference, FENOC agreed to provide a supplemental response to RAI 4.6-1 to include the basis for the 400 pressure and 400 temperature cycles and the pressure range of -0.67 to 45 psig in LRA Appendix A, Updated Safety Analysis Report Supplement. In addition, the NRC noted that, in the original LRA submittal, the pressure range for the fatigue waiver analysis was shown as -25 to 120 pounds per square inch (psi), whereas the range provided in the FENOC response to RAI 4.6-1 was -25 to 20 psi. FENOC agreed to provide a supplemental response to clarify that the pressure range of -25 to 120 psi provided in the LRA submittal was a typographical error and that the correct pressure range is -25 to 20 psi.

SUPPLEMENTAL RESPONSE RAI 4.6-1 LRA Sections 4.6.1 and A.2.5.1, both titled, Containment Vessel, are revised to include details from the fatigue waiver information provided in the response to RAI 4.6-1 submitted under FENOC letter dated August 17, 2011 (ML11231A966), and to state that the 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation.

In addition, LRA Sections 4.6.1 and A.2.5.1 are revised to state that the adjusted pressure range of -0.67 to 45 psig is based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25).

The containment vessel pressure cycle range of -25 to 120 psi stated in Sections 4.6.1 and A.2.5.1 of the original LRA submittal was a typographical error, and should have read -25 to 20 psi. However, the pressure range of -25 to 120 psi has since been replaced with the adjusted pressure range of -0.67 to 45 psig in LRA Sections 4.6.1 and A.2.5.1 in response to RAI 4.6-1 in FENOC letter dated August 17, 2011 (ML11231A966).

See Enclosure A to this letter for the revision to the DBNPS LRA.

L-11-292 Page 6 of 13 Section B.2.22 Supplemental Question RAI B.2.22-7 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI B.2.22-7 submitted in FENOC letter dated August 17, 2011 (ML11231A966). The NRC noted that, in the RAI response, FENOC provided a commitment to enhance the Inservice Inspection (ISI) - IWE Program to perform examinations prior to the period of extended operation to monitor for cracking of stainless steel containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading, but have no current licensing basis fatigue analysis.

The NRC Staff noted that the frequency for the inspections was not specified, and asked for discussion of the inspection frequency. FENOC stated that the inspection frequency is planned to occur once each 10-year ISI interval; the inspections would be ISI augmented inspections. Also, the representative sample size is planned to be 10 percent of the scope. FENOC mentioned that the general condition of the penetration is noted during Appendix J testing. In addition, FENOC stated that penetration fatigue analyses may be developed in lieu of inspections.

The NRC reviewer requested an LRA change/commitment to document the frequency, sample size, basis for sample size, and to emphasize the use of Appendix J testing. In addition, FENOC should consider clarifying that fatigue analyses, if later performed for these penetration components, would then remove the requirement to perform examinations for cracking. FENOC agreed to provide the requested information.

The NRC initiated a follow-up telephone conference call with FENOC on September 16, 2011, to request that FENOC also address scheduling of the subject inspections. FENOC agreed to provide the requested information.

SUPPLEMENTAL RESPONSE RAI B.2.22-7 LRA Section B.2.22, Inservice Inspection (ISI) Program - IWE, is revised to add a license renewal enhancement to the Inservice Inspection (ISI) Program - IWE to include surface examinations to monitor for cracking of stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis.

In addition, the 10 CFR Part 50 Appendix J Program requires verification that a general visual inspection of the accessible interior and exterior surfaces of the

L-11-292 Page 7 of 13 primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.

A review of Davis-Besse operating experience has not identified any instances of cracking of the stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components associated with the containment penetrations. Therefore, the containment penetration inspection sample size will include 10 percent of the subject containment penetration population or a maximum of 25, whichever is less. In this case the 10 percent applies since the penetration population is less than 250. The 10 percent sample size is consistent with other NUREG-1801 programs where the inspection is designed to provide assurance that aging is not occurring. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation.

By letter dated August 17, 2011 (ML11231A966), FENOC provided license renewal future Commitment 47 to enhance the Inservice Inspection (ISI) Program - IWE to include examinations to monitor for cracking of stainless steel containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. Commitment 47 is revised to clarify that, should fatigue analyses be performed in the future for the containment penetrations, the examinations will no longer be required.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Section B.2.39 Supplemental Question RAI B.2.39-11 The NRC initiated a telephone conference call with FENOC on September 13, 2011, to discuss the FENOC response to RAI B.2.39-11 submitted in FENOC letter dated August 26, 2011 (ML11242A166), regarding groundwater effects to concrete structures. The NRC deemed the information in the response acceptable, except that implementation by April 2017 is not acceptable. The NRC reviewer questioned whether the evaluation of core bores could occur and be dispositioned as early as 2014.

L-11-292 Page 8 of 13 SUPPLEMENTAL RESPONSE RAI B.2.39-11 FENOC agrees that implementation of core bores of concrete structures can occur by the end of year 2014. LRA Table A-1, Davis-Besse License Renewal Commitments, license renewal future Commitments 20 and 26, are revised to change the implementation schedule for core bores and evaluation of concrete due to aggressive groundwater from April 22, 2017 to December 31, 2014.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Section 3.2.2.2.3.6 Supplemental Question RAI 3.2.2.2.3.6-2 On September 21, 2011, the NRC questioned the changes made in response to Supplemental RAI 3.2.2.2.3.6-2 to LRA Table 3.3.2-26, Aging Management Review Results - Service Water System, row 83, and Table 3.3.2 27, Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System, row 38, provided in FENOC letter dated September 16, 2011 (ML11264A059). Specifically, the NRC staff noted that, following a line-by-line comparison of the tables to the LRA, the environments listed in two of the revised rows appeared to be incorrect.

Additionally, the NRC initiated a telephone conference call with FENOC on September 29, 2011, to address the response to Supplemental RAI 3.2.2.2.3.6-2.

In its response dated September 16, 2011 (ML11264A059), the applicant stated the following:

Furthermore, the LRA is revised to define the moist air (internal) environment to encompass both the air-water interface and the air environment above the interface. In conclusion, the Inspection of Internal Surfaces in Miscellaneous Piping and Ducting Program manages loss of material (except for selective leaching) and cracking for all in scope components subject to a moist air environment.

The NRC reviewer noted that changes to the associated aging management review rows seemed to be as expected. However, the reviewer had a question on rows 25 and 32 of LRA Table 3.3.2-27. The rows are for the stainless steel piping with an environment of Air-indoor uncontrolled (internal) and the reviewer requested that FENOC confirm that these rows are not associated with an air-water interface, and that no changes to these rows are needed.

L-11-292 Page 9 of 13 SUPPLEMENTAL RESPONSE RAI 3.2.2.2.3.6-2 FENOC agrees that the environments listed in LRA Table 3.3.2-26, Aging Management Review Results - Service Water System, row 83, and Table 3.3.2 27, Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System, row 38, in FENOC letter dated September 16, 2011 (ML11264A059), were inadvertently changed from Moist air (External) to Moist air (Internal). LRA Tables 3.3.2-26 and 3.3.2-27 are revised to include the correct Moist air (External) environment.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Rows 25 and 32 of LRA Table 3.3.2-27 are not associated with an air-water interface.

Row 25 is applicable to stainless steel drain piping in scope for 10 CFR 54.4(a)(1). The fuel transfer tubes contain vents, drains and test connections with valves that are normally closed. Therefore, piping located downstream from these valves is open to the ambient atmosphere and evaluated as Air-indoor uncontrolled (Internal).

Row 32 is applicable to stainless steel overflow piping in scope for 10 CFR 54.4(a)(2).

The spent fuel pool overflow piping has an inlet at a higher elevation than the normal spent fuel pool water surface level. Therefore, spent fuel pool water does not normally enter the overflow piping. This piping is open to the ambient atmosphere and is evaluated as Air-indoor uncontrolled (Internal).

Therefore, no changes are required to LRA Table 3.3.2-27 for rows 25 and 32.

Section 3.5.2 Supplemental Question RAI OIN-363 (Containment Vessel Surfaces)

FENOC generated Open Item Number OIN-363 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of May 9, 2011, to address an Inspector request regarding containment vessel surfaces. NRC Region III letter dated June 27, 2011, Davis-Besse Nuclear Power Station NRC License Renewal Scoping, Screening, and Aging Management Inspection Report 05000346/2011010 (ML11179A134), states that, The inspectors also identified the environment and aging mechanisms affecting the exterior containment vessel surface were not explicitly defined in the LRA or in NUREG-1801. The applicant issued OIN-363 to track an update of the LRA to identify the 10 CFR 50 Appendix J Program for management of both internal and external containment vessel surfaces.

L-11-292 Page 10 of 13 SUPPLEMENTAL RESPONSE RAI OIN-363 (CONTAINMENT VESSEL SURFACES)

Row No. 5 of LRA Table 3.5.2-1, Aging Management Review Results - Containment, addresses the Davis-Besse carbon steel containment vessel in an air-indoor environment. FENOC adds new plant-specific Note 0551 to the Plant-Specific Notes Table for Structures. Note 0551 states, The 10 CFR 50 Appendix J Program manages aging of both the internal and external surfaces of the containment vessel. FENOC also adds Note 0551 to the Notes column for Row No. 5 of LRA Table 3.5.2-1.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Section B.2.12 Supplemental Question RAI OIN-377 (Accessible Cables)

FENOC generated Open Item Number OIN-377 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding inspection of accessible cables in adverse localized environments. NRC Report, Audit Report Regarding the Davis-Besse Nuclear Power Station License Renewal Application (TAC NO. ME4640), dated June 1, 2011 (ML11122A014), page 26 (LRA AMP B.2.12 section), states:

During a breakout meeting, the staff questioned and verified that the sample size of cable inspection will include all inaccessible cables within adverse localized environment.

NRC Region III Inspection lead concurred that the word inaccessible in the above report statement is an error, and that the NRC intent was to establish consistency with NUREG-1801, Generic Aging Lessons Learned (GALL) Report, Revision 2, which specifies that all accessible cables within an adverse localized environment be inspected.

FENOC agreed to revise LRA Section B.2.12, Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program, and the underlying program evaluation document, to remove reference to inspection of a representative sample of cables in adverse localized environments, and specify that all accessible cables in adverse localized environments are to be inspected.

L-11-292 Page 11 of 13 SUPPLEMENTAL RESPONSE RAI OIN-377 (ACCESSIBLE CABLES)

LRA Section B.2.12 and its associated program evaluation document are revised to remove reference to inspection of a representative sample of cables in adverse localized environments, and specify that all accessible cables in adverse localized environments are to be inspected.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Section 4.7 Supplemental Question RAI OIN-378 (Crane Cycles TLAA)

FENOC generated Open Item Number OIN-378 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding crane cycles.

The NRC disagreed with the FENOC position that there is no time-limited aging analysis (TLAA) associated with the crane cycles for the Davis-Besse NUREG-0612 cranes. Based on discussions with the NRC, FENOC agreed to disposition the crane cycles as a TLAA.

SUPPLEMENTAL RESPONSE RAI OIN-378 (CRANE CYCLES TLAA)

The LRA is revised to include new Sections 4.7.7 and A.2.7.6, both titled Crane Load Cycles, to address the disposition of the time-limited aging analysis associated with crane load cycles.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Section B.2.40 Supplemental Question RAI OIN-379 (Water Control Structures Inspection)

FENOC generated Open Item Number OIN-379 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding the Water

L-11-292 Page 12 of 13 Control Structures Inspection. NRC inspectors requested that the Davis-Besse Water Control Structures Inspection include an enhancement to the acceptance criteria element, as follows:

Enhance the acceptance criteria for the Water Control Structures Inspection to require that loose bolts and nuts, cracked high strength bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and those referenced in the plants current licensing basis.

SUPPLEMENTAL RESPONSE RAI OIN-379 (WATER CONTROL STRUCTURES INSPECTION)

LRA Section B.2.40, Water Control Structures Inspection, and Table A-1, Davis-Besse License Renewal Commitments, are revised to include a program enhancement and a new license renewal future commitment bullet to Commitment 21 to include further clarification to the Structures Monitoring Program procedure, which includes the Water Control Structures Inspection.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Section 2.4 Supplemental Question RAI OIN-381 (Yard and Switchyard Towers)

FENOC generated Open Item Number OIN-381 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding Yard and Switchyard towers. NRC inspectors requested that the Davis-Besse switchyard distribution towers be specifically identified in the Structures Monitoring Program as components that are in scope for the Station Blackout (SBO) regulated event, as follows:

The description of SBO structural components will be expanded to include the cable support structures, by name, for the SBO electrical

L-11-292 Page 13 of 13 pathway in the Switchyard and from the Switchyard to the transformers in the Yard.

SUPPLEMENTAL RESPONSE RAI OIN-381 (YARD AND SWITCHYARD TOWERS)

The LRA is revised to include Switchyard Towers and Yard Towers for 345 kV electrical distribution as specific component types that are in scope for license renewal for the Station Blackout (SBO) regulated event. The component types are added to LRA Section 2.4.12, Yard Structures, Subsection 2.4.12.9, under the description of Station Blackout Component Foundations and Structures in the Yard and Switchyard, and to Table 2.4-12 Yard Structures Components Subject to Aging Management Review.

Also, two new rows are added to Table 3.5.2-12, Aging Management Review Results -

Yard Structures.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Supplemental Question RAI OIN-382 (Elastomeric Vibration Isolators)

FENOC generated Open Item Number OIN-382 during the NRC Region III Inspection Procedure IP-71002, License Renewal Inspection, held during the week of August 22, 2011, to address an Inspector request regarding elastomeric vibration isolators. A discussion with an NRC Inspector resulted in the discovery that there were elastomeric components used in the plant for vibration isolation of plant components; such elastomeric components are not currently described in the LRA. Therefore, a change to the LRA is required, described as follows:

The list of in-scope elastomeric components will be expanded to include the elastomeric elements in vibration isolators.

SUPPLEMENTAL RESPONSE RAI OIN-382 (ELASTOMERIC VIBRATION ISOLATORS)

LRA Section 2.4, Scoping and Screening Results: Structures, and Section 3.5.2, Results, are revised to include elastomeric vibration isolators in the list of in-scope elastomeric components, including elastomeric elements in vibration isolators. Also, as a result of the review of this item, the support for criterion (a)(1) equipment (SSR) intended function is added for metal vibration isolators, including metal elements in vibration isolators.

See Enclosure A to this letter for the revision to the DBNPS LRA.

Attachment 2 L-11-292 Regulatory Commitment List Page 1 of 1 The following list identifies those actions committed to by FirstEnergy Nuclear Operating Company (FENOC) for the Davis-Besse Nuclear Power Station, Unit No. 1 (Davis-Besse) in this document. Any other actions discussed in the submittal represent intended or planned actions by FENOC. They are described only as information and are not Regulatory Commitments. Please notify Mr. Clifford I. Custer, Project Manager - Fleet License Renewal, at (724) 682-7139 of any questions regarding this document or associated Regulatory Commitments.

Regulatory Commitment Due Date

1. FENOC will perform a fatigue evaluation in May 31, 2012 accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and DH23. LRA Sections 4.3.2.3.2 and A.2.3.2.13, both titled Class 1 Valves Fatigue, will be revised to include the results of the fatigue evaluations, and these changes will be submitted as an amendment to the Davis-Besse LRA no later than May 31, 2012.

Enclosure A Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS)

Letter L-11-292 Amendment No. 19 to the DBNPS License Renewal Application Page 1 of 52 License Renewal Application Sections Affected LRA Table of Contents Section 3.3.2.1.14 Section 4.3.3.2 Table 3.3.2-14 Section 4.6.1 Section 2 Table 3.3.2-26 Section 4.7.7 Table 2.2-3 Table 3.3.2-27 Table 2.3.1-3 Section 3.5.2.1.13 Appendix A Table 2.3.3-14 Section 3.5.2.2.2.6 Table of Contents Section 2.4 Table 3.5.1 Section A.1.22 Section 2.4.12 Table 3.5.2-1 Section A.2.3.2.13 Section 2.4.12.9 Table 3.5.2-12 Section A.2.5.1 Table 2.4-12 Table 3.5.2-13 Section A.2.7.6 Table 2.4-13 Table 3.5.2 P-S Notes Table A-1 Section 3 Section 4 Appendix B Section 3.1.2.2.13 Table 4.1-1 Section B.2.12 Table 3.1.1 Table 4.1-2 Section B.2.22 Table 3.1.2-3 Section 4.3.2.3.2 Section B.2.40 The Enclosure identifies the change to the License Renewal Application (LRA) by Affected LRA Section, LRA Page No., and Affected Paragraph and Sentence. The count for the affected paragraph, sentence, bullet, etc. starts at the beginning of the affected Section or at the top of the affected page, as appropriate. Below each section the reason for the change is identified, and the sentence affected is printed in italics with deleted text lined-out and added text underlined.

Enclosure A L-11-292 Page 2 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table of Contents Page xii New Row In response to Supplemental RAI OIN-378, the Table of Contents is revised to add new LRA Section 4.7.7, Crane Load Cycles, as follows:

4.7.7 CRANE LOAD CYCLES .......................................................................... 4.7-6 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 2.2-3 Pages 2.2-7, 3 New Rows 2.2-9 and 2.2-10 Errata: During development of responses to NRC RAIs, FENOC identified that three types of structures were inadvertently not included in LRA Table 2.2-3, License Renewal Scoping Results for Structures. LRA Table 2.2-3 is revised to include three new rows as follows:

Table 2.2-3 License Renewal Scoping Results for Structures Structure Name In-Scope Screening Results / Section Cable Trenches Yes 2.4.12 Duct Banks Yes 2.4.12 Manholes Yes 2.4.12

Enclosure A L-11-292 Page 3 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 2.3.1-3 Page 2.3-16 New Row In response to Supplemental RAI Table 3.1.2-3, a new row is added to LRA Table 2.3.1-3, Reactor Coolant System and Reactor Coolant Pressure Boundary Components Subject to Aging Management Review, to read as follows:

Intended Function Component Type (as defined in Table 2.0-1)

Piping <4 inches - RV flange leakage line tap Pressure boundary weld Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 2.3.3-14 Page 2.3-95 3 Rows In response to RAI 3.3.2.14-1, the rows associated with the fire water storage tank heat exchanger and the fire water storage tank recirculation pump in LRA Table 2.3.3-14, Fire Protection System Components Subject to Aging Management Review, are no longer needed and are deleted as follows:

Intended Function Component Type (as defined in Table 2.0-1)

Heat Exchanger (channel, shell, and tubesheet) -

Pressure boundary Fire water storage tank heat exchanger (DB-E52)

Heat Exchanger (tubes) - Fire water storage tank Heat transfer heat exchanger (DB-E52)

Pump Casing - Fire water storage tank Pressure boundary recirculation pump (DB-P114)

Enclosure A L-11-292 Page 4 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Section 2.4 Pages 2.4-1 Note, 2 new structural sub-items in and 2.4-2 Station Blackout Components and Structures In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the Note located at the end of the list of structures in the scope of license renewal at the beginning of LRA Section 2.4, Scoping and Screening Results: Structures, as follows:

Note: The yard structures evaluated for license renewal include foundations and structural arrangements for the Borated Water Storage Tank (including Trench);

Diesel Oil Pump House, Diesel Oil Storage Tank, Emergency Diesel Generator Fuel Oil Storage Tanks; Fire Hydrant Hose Houses; Fire Walls between Bus-Tie Transformers, between Bus-Tie and Startup Transformer 01, and between Auxiliary and Main Transformers; Fire Water Storage Tank; Nitrogen Storage Building; Station Blackout Components and Structures In the Yard and Switchyard (Startup Transformers 01 and 02, Bus-Tie Transformers, 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563, ACB34564, air break switch ABS34625, Relay House, Switchyard and Yard Towers for 345-kV distribution, J and K buses); Wave Protection Dikes; Duct Banks; Cable Trenches; and Manholes.

Enclosure A L-11-292 Page 5 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Section 2.4.12 Page 2.4-1 11th Bullet, 2 new structural and 2.4-2 sub-items to Station Blackout Component Foundations and Structures list In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the eleventh bullet (Station Blackout Component Foundations and Structures) in the list of Yard Structures in LRA Section 2.4.12, Yard Structures, as follows:

x Station Blackout Components and Structures in the Yard and Switchyard including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; 345-kV Switchyard air break switch ABS34625; Relay House, Switchyard and Yard Towers for 345-kV distribution, and the 345-kV Switchyard J and K buses

Enclosure A L-11-292 Page 6 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Section 2.4.12.9 Pages 2.4-42 Title, and and 2.4-43 Structure Description, 1st and 2nd Paragraphs In response to Supplemental RAI OIN-381, two new station blackout structural sub-items (i.e., Switchyard and Yard Towers) are added to the Title and to the Structure Description, first and second paragraphs, of LRA Section 2.4.12.9, Station Blackout Component Foundations and Structures in the Yard and Switchyard (Startup Transformers 01 and 02; Bus-Tie Transformers; 345 kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; J and K buses) -

Seismic Class II, as follows:

2.4.12.9 Station Blackout Component Foundations and Structures in the Yard and Switchyard (including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV Switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; Switchyard and Yard Towers for 345-kV distribution ; J and K buses) - Seismic Class II Structure Description The station blackout component foundations and structures in the yard and switchyard (including Startup Transformers 01 and 02; Bus-Tie Transformers; 345-kV switchyard circuit breakers ACB34560, ACB34561, ACB34562, ACB34563 and ACB34564; air break switch ABS34625; Relay House; Switchyard and Yard Towers for 345-kV distribution; J and K buses) are Seismic Class II structures. Startup Transformers 01 and 02, Bus-Tie Transformers, and associated breakers (circuit breakers ACB34560, ACB34561, ACB34562, ACB34563, ACB34564 and air break switch ABS34625) define the physical boundary that provides an offsite alternating current (AC) source for recovery from a station blackout regulated event.

Startup Transformer 01, Startup Transformer 02, and the Bus-Tie Transformers have reinforced concrete foundations that rest on structural backfill. The transformers are supported on wall and column footings. The switchyard breakers are supported by steel frame structures. and tThe bus support structures, the switchyard towers, and the yard towers are supported by reinforced concrete caisson foundations. Cable trenches provide routing space and support to electrical cables within the station blackout boundary. The concrete cable trench is provided with removable checkered plates and top slabs for access.

Enclosure A L-11-292 Page 7 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 2.4-12 Page 2.4-47 2 New Rows In response to Supplemental RAI OIN-381, two new rows are added to Table 2.4-12, Yard Structures Components Subject to Aging Management Review, as follows:

Intended Function Component Type (as defined in Table 2.0-1)

SBO Component Support Structures: Switchyard SRE Towers for 345-kV Distribution SBO Component Support Structures: Yard SRE Towers for 345-kV Distribution

Enclosure A L-11-292 Page 8 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 2.4-13 Pages 2.4-51 Vibration Isolators Row, and and 2.4-52 1 New Row In response to Supplemental RAI OIN-382, the Vibration Isolators row of LRA Table 2.4-13, Bulk Commodities Components Subject to Aging Management Review, is revised, and a new Elastomeric Components row is added to the table, as follows:

Intended Function Component Type (as defined in Table 2.0-1)

Steel and Other Metals Vibration Isolators including elements SNS, SRE, SSR Elastomeric Components Vibration Isolators including elements SNS, SRE, SSR

Enclosure A L-11-292 Page 9 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 3.1.2.2.13 Page 3.1-11 New [last] sentence In response to Supplemental RAI Table 3.1.2-3, a new sentence is added to the end of LRA Section 3.1.2.2.13, Cracking due to Primary Water Stress Corrosion Cracking (PWSCC), and the section is revised to read:

3.1.2.2.13 Cracking due to Primary Water Stress Corrosion Cracking (PWSCC)

Cracking due to PWSCC could occur in PWR components made with nickel alloy and steel with nickel alloy cladding exposed to reactor coolant. Cracking due to SCC (including PWSCC) in Davis-Besse PWR components made with nickel alloy is managed by the Inservice Inspection Program, Nickel-Alloy Management Program, and PWR Water Chemistry Program. Cracking due to SCC (including PWSCC) for small-bore piping nickel-alloy welds is also managed by the Small Bore Class 1 Piping Inspection Program.

Enclosure A L-11-292 Page 10 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.1.1 Page 3.1-23 Row 3.1.1-31 Discussion column In response to Supplemental RAI Table 3.1.2-3, the text in the Discussion column for row 3.1.1-31 of LRA Table 3.1.1, Summary of Aging Management Programs for Reactor Vessel, Internals, Reactor Coolant System and Reactor Coolant Pressure Boundary, and Steam Generators Evaluated in Chapter IV of NUREG-1801, is revised and now reads as follows:

Table 3.1.1 Summary of Aging Management Programs for Reactor Vessel, Internals, Reactor Coolant System and Reactor Coolant Pressure Boundary, and Steam Generators Evaluated in Chapter IV of NUREG-1801 Further Item Aging Effect/ Aging Management Component/Commodity Evaluation Discussion Number Mechanism Programs Recommended 3.1.1-31 Nickel alloy and steel with nickel- Cracking due to Inservice Inspection No, but licensee Consistent with NUREG-1801.

alloy cladding piping, piping primary water stress (IWB, IWC, and IWD) commitment Cracking due to SCC (including component, piping elements, corrosion cracking and Water Chemistry needs to be PWSCC) in nickel alloy penetrations, nozzles, safe ends, and FSAR supp confirmed components is managed by the and welds (other than reactor commitment to Inservice Inspection Program, vessel head); pressurizer heater implement applicable PWR Water Chemistry Program, sheaths, sleeves, diaphragm plant commitments to (1) and Nickel-Alloy Management plate, manways and flanges; NRC Orders, Bulletins, Program. Cracking due to SCC core support pads/core guide and Generic Letters (including PWSCC) for lugs associated with nickel small-bore piping nickel-alloy alloys and (2) staff-welds is also managed by the accepted industry Small Bore Class 1 Piping guidelines.

Inspection Program.

Further evaluation is documented in Section 3.1.2.2.13.

Enclosure A L-11-292 Page 11 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.1.2-3 Page 3.1-163 8 New Rows In response to Supplemental RAI Table 3.1.2-3, LRA Table 3.1.2-3, Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System, is revised to add eight new rows as follows:

Table 3.1.2-3 Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Piping <4 inches RV Borated Pressure Nickel Cracking -

-- flange reactor coolant TLAA IV.C2-25 3.1.1-08 A boundary Alloy Fatigue leakage line (Internal) tap weld Piping <4 inches RV Borated C Pressure Nickel Cracking -

-- flange reactor coolant Inservice Inspection IV.C2-26 3.1.1-62 0102 boundary Alloy Flaw Growth leakage line (Internal) 0103 tap weld Piping <4 inches RV Borated Cracking -

Pressure Nickel

-- flange reactor coolant PWSCC, Inservice Inspection IV.C2-13 3.1.1-31 A boundary Alloy leakage line (Internal) SCC/IGA tap weld Piping <4 inches RV Borated Cracking -

Pressure Nickel Nickel-Alloy A

-- flange reactor coolant PWSCC, IV.C2-13 3.1.1-31 boundary Alloy Management 0110 leakage line (Internal) SCC/IGA tap weld

Enclosure A L-11-292 Page 12 of 52 Table 3.1.2-3 Aging Management Review Results - Decay Heat Removal and Low Pressure Injection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Piping <4 inches RV Borated Cracking -

Pressure Nickel PWR Water

-- flange reactor coolant PWSCC, IV.C2-13 3.1.1-31 A boundary Alloy Chemistry leakage line (Internal) SCC/IGA tap weld Piping <4 inches RV Borated Cracking -

Pressure Nickel Small Bore Class 1

-- flange reactor coolant PWSCC, IV.C2-13 3.1.1-31 E boundary Alloy Piping Inspection leakage line (Internal) SCC/IGA tap weld Piping <4 inches RV Borated Pressure Nickel Loss of PWR Water

-- flange reactor coolant IV.C2-15 3.1.1-83 A boundary Alloy Material Chemistry leakage line (Internal) tap weld Piping <4 Air with inches RV Pressure Nickel borated water A

-- flange None None IV.E-3 3.1.1-86 boundary Alloy leakage 0103 leakage line (External) tap weld

Enclosure A L-11-292 Page 13 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 3.3.2.1.14 Page 3.3-19 Aging Management Programs, 1 bullet In response to RAI 3.3.2.14-1, the Aging Management Program subsection of Section 3.3.2.1.14, Fire Protection System, is revised to delete the PWR Water Chemistry Program as follows:

x PWR Water Chemistry Program

Enclosure A L-11-292 Page 14 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.3.2-14 Pages 3.3-315 Rows 20-30 and 77-79 thru 3.3-323 In response to RAI 3.3.2.14-1, LRA Table 3.3.2-14, Aging Management Review Results - Fire Protection System, previously replaced in its entirety in FENOC letter dated September 16, 2011 (ML11264A059), is revised to identify that rows 20-30 and 77-79 are Not used, as these rows are no longer needed, and the rows now read as follows:

Table 3.3.2-14 Aging Management Review Results - Fire Protection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Heat Exchanger (channel) -

Fire Water Air-indoor Storage Tank Pressure Loss of External Surfaces 20 Steel uncontrolled VII.G-5 3.3.1-59 A Heat boundary material Monitoring (External)

Exchanger (DB-E52)

Not used.

Enclosure A L-11-292 Page 15 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Heat Exchanger (channel) -

Fire Water Storage Tank Pressure Raw water Loss of 21 Steel Fire Water VII.G-24 3.3.1-68 C Heat boundary (Internal) material Exchanger (DB-E52)

Not used.

Heat Exchanger (shell) - Fire Water Storage Tank Pressure Steam Loss of One-Time E 22 Steel VIII.B1-8 3.4.1-37 Heat boundary (Internal) material Inspection 0315 Exchanger (DB-E52)

Not used.

Heat Exchanger (shell) - Fire Water Storage Tank Pressure Steam Loss of PWR Water 23 Steel VIII.B1-8 3.4.1-37 C Heat boundary (Internal) material Chemistry Exchanger (DB-E52)

Not used.

Enclosure A L-11-292 Page 16 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Heat Exchanger (shell) - Fire Water Air-indoor Storage Tank Pressure Loss of External Surfaces 24 Steel uncontrolled VII.G-5 3.3.1-59 A Heat boundary material Monitoring (External)

Exchanger (DB-E52)

Not used.

Heat Exchanger (tubes) - Fire Collection, Water Drainage, and Storage Tank Stainless Raw water Reduction in 25 Heat transfer Treatment VII.G-7 3.3.1-83 E Heat Steel (Internal) heat transfer Components Exchanger Inspection (DB-E52)

Not used.

Heat Exchanger (tubes) - Fire Water Storage Tank Stainless Steam Reduction in PWR Water 26 Heat transfer N/A N/A G Heat Steel (External) heat transfer Chemistry Exchanger (DB-E52)

Not used.

Enclosure A L-11-292 Page 17 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Heat Exchanger (tubes) - Fire Water Storage Tank Stainless Steam Reduction in One-Time G 27 Heat transfer N/A N/A Heat Steel (External) heat transfer Inspection 0315 Exchanger (DB-E52)

Not used.

Heat Exchanger (tubesheet) -

Fire Water Storage Tank Pressure Raw water Loss of 28 Steel Fire Water VII.G-24 3.3.1-68 C Heat boundary (Internal) material Exchanger (DB-E52)

Not used.

Heat Exchanger (tubesheet) -

Fire Water Storage Tank Pressure Steam Loss of One-Time E 29 Steel VIII.B1-8 3.4.1-37 Heat boundary (External) material Inspection 0315 Exchanger (DB-E52)

Not used.

Enclosure A L-11-292 Page 18 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Heat Exchanger (tubesheet) -

Fire Water Storage Tank Pressure Steam Loss of PWR Water 30 Steel VIII.B1-8 3.4.1-37 C Heat boundary (External) material Chemistry Exchanger (DB-E52)

Not used.

Pump Casing

- Fire Water Storage Tank Recirculation Pressure Gray Cast Raw water Loss of 77 Fire Water VII.G-24 3.3.1-68 A Pump (DB- boundary Iron (Internal) material P114)

Not used.

Pump Casing

- Fire Water Storage Tank Recirculation Pressure Gray Cast Raw water Loss of Selective Leaching 78 VII.G-14 3.3.1-85 A Pump (DB- boundary Iron (Internal) material Inspection P114)

Not used.

Enclosure A L-11-292 Page 19 of 52 Table 3.3.2-14 Aging Management Review Results - Fire Protection System NUREG-Aging Effect Aging Row Component Intended 1801, Table 1 Material Environment Requiring Management Notes No. Type Function(s) Volume Item Management Program 2 Item Pump Casing

- Fire Water Storage Tank Air-indoor Recirculation Pressure Gray Cast Loss of External Surfaces 79 uncontrolled VII.I-8 3.3.1-58 A Pump (DB- boundary Iron material Monitoring (External)

P114)

Not used.

Enclosure A L-11-292 Page 20 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.3.2-26 Page 3.3-475 Row 83, Environment column In response to Supplemental RAI 3.2.2.2.3.6-2, the Environment column of row 83 of LRA Table 3.3.2-26, Aging Management Review Results - Service Water System, is revised as follows:

Table 3.3.2-26 Aging Management Review Results - Service Water System NUREG-Aging Effect Row Component Intended Aging Management 1801, Table 1 Material Environment Requiring Notes No. Type Function(s) Program Volume 2 Item Management Item Pump Casing Inspection of Internal

- Service Moist air Pressure Loss of Surfaces in 83 water pump Steel (External N/A N/A G boundary material Miscellaneous (DB-P3-1, 2, (Internal)

Piping and Ducting

& 3)

Enclosure A L-11-292 Page 21 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.3.2-27 Page 3.3-488 Row 38, Environment column In response to Supplemental RAI 3.2.2.2.3.6-2, the Environment column of row 38 of LRA Table 3.3.2-27, Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System, is revised as follows:

Table 3.3.2-27 Aging Management Review Results - Spent Fuel Pool Cooling and Cleanup System NUREG-Aging Effect Row Component Intended Aging Management 1801, Table 1 Material Environment Requiring Notes No. Type Function(s) Program Volume 2 Item Management Item Inspection of Internal Moist air Structural Stainless Loss of Surfaces in 38 Piping (External) N/A N/A G integrity Steel material Miscellaneous (Internal)

Piping and Ducting

Enclosure A L-11-292 Page 22 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 3.5.2.1.13 Page 3.5-18 New Aging Effects Requiring Management bullet In response to Supplemental RAI OIN-382, a new bullet is added to the Aging Effects Requiring Management subsection of LRA Section 3.5.2.1.13, Bulk Commodities, as follows:

Aging Effects Requiring Management The following aging effects associated with structural components of evaluated bulk commodities require management:

x Change in material properties x Cracking x Delamination x Loss of material x Loss of preload x Reduction or loss of isolation function x Separation

Enclosure A L-11-292 Page 23 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 3.5.2.2.2.6 Page 3.5-31 2nd Paragraph, 3rd sentence, and New bullet In response to Supplemental RAI OIN-382, the third sentence of the second paragraph is revised, and a new bullet is added to the end of the second paragraph list of supports in LRA Section 3.5.2.2.2.6, Aging of Supports Not Covered by Structures Monitoring Program, as follows:

Each of the following is within the scope of the Structures Monitoring Program.

Therefore, further evaluation is not required. In addition, loss of material due to corrosion for susceptible materials is managed by the Boric Acid Corrosion Program within areas that contain borated systems.

x Building concrete around support anchorages x HVAC duct supports x Instrument supports x Non-ASME mechanical equipment supports x Non-ASME supports x Electrical panels and enclosures x Vibration isolators including elements

Enclosure A L-11-292 Page 24 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.5.1 Page 3.5-53 Row 3.5.1-41, Discussion column In response to Supplemental RAI OIN-382, the Discussion column of row 3.5.1-41 of LRA Table 3.5.1, Summary of Aging Management Programs for Structures and Component Supports Evaluated in Chapters II and III of NUREG-1801, is revised as follows:

Table 3.5.1 Summary of Aging Management Programs for Structures and Component Supports Evaluated in Chapters II and III of NUREG-1801 Further Item Aging Effect/ Aging Management Component/Commodity Evaluation Discussion Number Mechanism Programs Recommended 3.5.1-41 Vibration isolation elements Reduction or loss Structures Monitoring Yes, if not Not applicable.

of isolation Program within the Davis-Besse has not identified function/radiation scope of the non-metallic vibration isolator hardening, applicants elements.

temperature, structures humidity, sustained monitoring Consistent with NUREG-1801.

vibratory loading program The Structures Monitoring Program is credited for aging management of these effects and mechanisms.

Further evaluation is documented in Section 3.5.2.2.2.6.

Enclosure A L-11-292 Page 25 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.5.2-1 Page 3.5-63 Row 5, Notes column In response to Supplemental RAI OIN-363, the Notes column of row 5 of LRA Table 3.5.2-1, Aging Management Review Results - Containment, is revised to add new plant-specific note 0551, as follows:

Table 3.5.2-1 Aging Management Review Results - Containment NUREG-Aging Effect Aging Row Component / Intended 1801, Table 1 Material Environment Requiring Management Notes No. Commodity Function1 Volume 2 Item Management Program Item EN, FLB, ISI Program-IWE Containment HELB, SHD, Carbon Loss of A 5 Air-indoor II.A2-9 3.5.1-06 Vessel SPB, SRE, Steel material 10 CFR Part 50, 0551 SSR Appendix J

Enclosure A L-11-292 Page 26 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.5.2-12 Page 3.5-113 2 New Rows In response to Supplemental RAI OIN-381, two new rows are added to LRA Table 3.5.2-12, Aging Management Review Results - Yard Structures, as follows:

Table 3.5.2-12 Aging Management Review Results - Yard Structures NUREG-Aging Effect Aging Row Component / Intended 1801, Table 1 Material Environment Requiring Management Notes No. Commodity Function1 Volume 2 Item Management Program Item SBO Component Support Structure: Carbon Loss of Structures

-- SRE Air-outdoor III.A3-12 3.5.1-25 A Switchyard Steel material Monitoring Towers for 345-kV Distribution SBO Component Support Carbon Loss of Structures

-- Structure: SRE Air-outdoor III.A3-12 3.5.1-25 A Steel material Monitoring Yard Towers for 345-kV Distribution

Enclosure A L-11-292 Page 27 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.5.2-13 Page 3.5-113 Row 135, Component Type and Intended Function columns; and, New Row In response to Supplemental RAI OIN-382, the Component / Commodity and Intended Function columns of row 135 are revised, and a new row is added to LRA Table 3.5.2-13, Aging Management Review Results - Bulk Commodities, as follows:

Table 3.5.2-13 Aging Management Review Results - Bulk Commodities NUREG-Aging Effect Aging Row Component / Intended 1801, Table 1 Material Environment Requiring Management Notes No. Commodity Function1 Volume 2 Item Management Program Item Vibration Isolators SNS, SRE, Carbon Loss of Structures 135 Air-indoor III.B2-10 3.5.1-39 A including SSR Steel material Monitoring elements Vibration Reduction or Isolators SNS, SRE, loss of Structures

-- Elastomer Air-indoor III.B4-12 3.5.1-41 A including SSR isolation Monitoring elements function

Enclosure A L-11-292 Page 28 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 3.5.2 Page 3.5-172 New Note / Row Plant-Specific Notes In response to Supplemental RAI OIN-363, LRA Table 3.5.2, Plant-Specific Notes, is revised to add a new plant-specific note as follows:

Plant-Specific Notes:

0551 The 10 CFR 50 Appendix J Program manages aging of both the internal and external surfaces of the containment vessel.

Enclosure A L-11-292 Page 29 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 4.1-1 Page 4.1-4 New row In response to Supplemental RAI OIN-378, new LRA Section 4.7.7, Crane Load Cycles, is added to LRA Table 4.1-1, Time-Limited Aging Analyses, as follows:

Table 4.1-1 Time-Limited Aging Analyses 54.21(c)(1) LRA Results of TLAA Evaluation by Category Paragraph Section Other Plant-Specific Time-Limited Aging Analyses 4.7 Crane Load Cycles (i) 4.7.7 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table 4.1-2 Page 4.1-5 Fatigue analysis of the polar crane row In response to Supplemental RAI OIN-378, the Fatigue analysis of the polar crane row of LRA Table 4.1-2, Review of Generic TLAAs Listed in NUREG-1800, is revised as follows:

Table 4.1-2 Review of Generic TLAAs Listed in NUREG-1800 Applicable to Davis-Besse LRA NUREG-1800 Generic TLAAs (Y/N?) Section NUREG-1800, Table 4.1-3 No - No TLAA identified Fatigue analysis of the polar crane 4.7.7 Yes

Enclosure A L-11-292 Page 30 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 4.3.2.3.2 Pages 4.3-16 2nd Paragraph, 2nd Sentence and 4.3-17 In response to RAI 4.3.2.3.2 (Supplement), LRA Section 4.3.2.3.2, Class 1 Valves Fatigue, previously replaced in its entirety in FENOC letter dated July 22, 2011 (ML11208C274), second paragraph, is revised to read as follows:

A search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves. Therefore, a commitment is provided in Appendix A to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves greater than 4 inches diameter nominal pipe size. The issue of missing records has been documented in the Davis-Besse Corrective Action Program for resolution.

Affected LRA Section LRA Page No. Affected Paragraph and Sentence 4.3.3.2 Page 4.3-23 1st Bulleted Item - both paragraphs In response to RAI 3.3.2.14-1, the first bulleted item on LRA page 4.3-23 in LRA Section 4.3.3.2, Non-Class 1 Major Components, is deleted in its entirety as follows:

x The fire water storage tank heat exchanger is the only non-piping component within the evaluation boundaries of the Fire Protection System that exceeds the fatigue threshold temperature. This heat exchanger was fabricated in accordance with ASME Section VIII Division 1.

No fatigue analysis exists for the fire water storage tank heat exchanger, and therefore, there is no TLAA related to fatigue. This component requires no further fatigue evaluation for the period of extended operation.

Enclosure A L-11-292 Page 31 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 4.6.1 Page 4.6-1 Second paragraph In response to Supplemental RAI 4.6-1, LRA Section 4.6.1, Containment Vessel, second paragraph, is revised to read as follows:

4.6.1 CONTAINMENT VESSEL The containment vessel is a cylindrical steel pressure vessel with hemispherical dome and ellipsoidal bottom which houses the reactor vessel, reactor coolant piping, pressurizer, pressurizer quench tank and coolers, reactor coolant pumps, steam generators, core flooding tanks, letdown coolers, and normal ventilating system. The containment vessel is a Class B vessel as defined in the ASME Section III, Paragraph N-132, 1968 Edition through Summer 1969 Addenda.

The containment vessel is designed to resist dead loads, LOCA loads, operating loads, external pressure load, temperature and pressure, impingement force and missiles, wind loads, seismic loads, gravity loads, and live loads. The containment vessel meets the requirements of ASME Section III, Paragraph N-415.1; thereby justifying the exclusion of cyclic or fatigue analyses in the design of the containment vessel. Analysis of 400 pressure cycles (from -0.67 psig to 45 psig) and 400 temperature cycles (from 30°F to 120°F) were performed against the requirements of ASME Section III, Paragraph N-415.1. The 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation. Details of the ASME Section III, Paragraph N-415 analysis are as follows.

N-415.1(a)

The number of times (including startup and shutdown) that the pressure will be cycled from atmospheric pressure to operating pressure and back to atmospheric pressure must not exceed the number of cycles on Figure N-415(A) corresponding to an Sa value of 3 times Sm.

3 Sm is equal to 56,250 psi and from Figure N-415(A) the corresponding number of cycles is equal to 1,800. The specified number of 400 pressure cycles is less than the 1,800 cycles from Figure N-415(A). Therefore, the condition in N-415.1(a) is met.

Enclosure A L-11-292 Page 32 of 52 N-415.1(b)

Specified full range of pressure fluctuations may not exceed the quantity 1/3 x design pressure x Sa/Sm. Sa is the value from Figure N-415(A) for 400 cycles.

1/3 x 36 x 125,000/18,750 = 80 psi Specified full range of pressure fluctuations is 45 psi (-25 to 20 psi) and is less than 80 psi. Therefore, the condition in N-415.1(b) is met.1 N-415.1(c)

The temperature difference in degrees F between any two adjacent points during normal operation and during startup and shutdown must not exceed Sa/(2E).

For a mean temperature of 70°F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =

358°F.

Temperature cycle range of 90°F (from 30°F to 120°F) is less than 358°F.

Therefore, the condition in N-415.1(c) is met.

N-415.1(d)

The temperature difference in degrees F between any two adjacent points does not change during normal operation by more than Sa/(2E).

For a mean temperature of 70°F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =

358°F Temperature cycle range of 90°F (from 30°F to 120°F) is less than 358°F.

Therefore, the condition in N-415.1(d) is met.

1 The pressure cycle range used in the fatigue waiver evaluation is from -25 to 20 psi for a full range pressure fluctuation of 45 psi. However, the possible full range pressure fluctuation is from -0.67 to 45 psig based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). This adjusted full range pressure fluctuation of 45.67 psi is less than the 80 psi value determined in N-415.1(b) above. Therefore, the condition in N-415.1(b) is met.

The 60-year projected cycles for plant heatup and cooldown are 128 (shown in Table 4.3-1) and are less than the specified 400 pressure cycles and 400 temperature cycles. Therefore, the values of 400 pressure and temperature cycles used to exclude fatigue analyses will not be exceeded for 60 years of

Enclosure A L-11-292 Page 33 of 52 operation. Thus, the TLAAs associated with exclusion of fatigue analyses for the containment vessel will remain valid for the period of extended operation.

Disposition: 10 CFR 54.21(c)(1)(i) The TLAAs excluding the containment vessel from fatigue analysis per ASME Section III, Paragraph N415-1 will remain valid through the period of extended operation.

Enclosure A L-11-292 Page 34 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence 4.7.7 Page 4.7-6 New Section In response to Supplemental RAI OIN-378, new LRA Section 4.7.7, Crane Load Cycles, is added as follows:

4.7.7 CRANE LOAD CYCLES The load cycle limits for cranes was identified as a potential TLAA. The following Davis-Besse cranes are in the scope of License Renewal and have been identified as having a TLAA, which requires evaluation for 60 years:

  • containment polar crane (including auxiliary hoist)
  • reactor service crane
  • spent fuel shipping cask crane (including auxiliary hoist)
  • intake structure gantry crane These cranes are designed in accordance with Bechtel design specifications.

These specifications require that the cranes shall be designed in accordance with the minimum requirements for Class A cranes as stated in Crane Manufacturers Association of America (CMAA) Specification 70 for Electric Overhead Traveling Cranes, except as the requirements are extended by the Bechtel specification; and, in the case of conflict, that the more stringent requirements shall govern.

Class A cranes are designed for up to 100,000 load cycles.

Containment Polar Crane (including Auxiliary Hoist)

The estimated number of cycles for 60 years of operation is bounded by 22,000 cycles. Less than 500 cycles are due to the main hoist with the remaining cycles due to the auxiliary hoist. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 22,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the containment polar crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.

Reactor Service Crane The estimated number of cycles for 60 years of operation is bounded by 8,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages

Enclosure A L-11-292 Page 35 of 52 with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 8,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the reactor service crane load cycle assumption remains valid for the period of extended operation.

Spent Fuel Shipping Cask Crane (including Auxiliary Hoist)

The estimated number of cycles for 60 years of operation is bounded by 18,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 18,000 cycles. Also, 3,600 cycles are estimated for crane usage during non-outage periods and are included in the estimate of 18,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the spent fuel shipping cask crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.

Intake Structure Gantry Crane The estimated number of cycles for 60 years of operation is bounded by 1,700 cycles. The rate of occurrence is based on crane usage through out the calendar year at 20 cycles per year. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 1,700 cycles.

Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the intake structure gantry crane load cycle assumption remains valid for the period of extended operation.

Disposition: 10 CFR 54.21(c)(1)(i) Crane load assumptions remain valid for the period of extended operation.

Enclosure A L-11-292 Page 36 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Appendix A Page A-5 New Row Table of Contents In response to Supplemental RAI OIN-378, the Appendix A Table of Contents is revised to add new LRA Section A.2.7.6, Crane Load Cycles, as follows:

A.2.7.6 CRANE LOAD CYCLES ........................................................................A-50 Affected LRA Section LRA Page No. Affected Paragraph and Sentence A.1.22 Page A-17 First paragraph In response to Supplemental RAI B.2.22-7, the first paragraph of LRA Section A.1.22, Inservice Inspection (ISI) Program - IWE, previously revised in FENOC letter dated August 17, 2011 (ML11231A966), is split into two paragraphs and revised to read as follows:

A.1.22 INSERVICE INSPECTION (ISI) PROGRAM - IWE The Inservice Inspection (ISI) Program - IWE establishes responsibilities and requirements for conducting ASME Code,Section XI, Subsection IWE (IWE) inspections as required by 10 CFR 50.55a. The Inservice Inspection (ISI)

Program - IWE includes examination and testing of accessible surface areas of the steel containment; containment hatches and airlocks; seals, gaskets and moisture barriers; and containment pressure-retaining bolting in accordance with the requirements of IWE.

The program will includes surface examinations to monitor for cracking of containment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size includes 10 percent

Enclosure A L-11-292 Page 37 of 52 of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. In addition, the 10 CFR Part 50 Appendix J Program provides for verification that a general visual inspection of the accessible interior and exterior surfaces of the primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.

Affected LRA Section LRA Page No. Affected Paragraph and Sentence A.2.3.2.13 Page A-41 2nd Paragraph, 2nd Sentence In response to RAI 4.3.2.3.2 (Supplement), LRA Section A.2.3.2.13, Class 1 Valves Fatigue, previously added in FENOC letter dated July 22, 2011 (ML11208C274), second paragraph, is revised to read as follows:

A search of the Davis-Besse records did not locate fatigue evaluations for the subject Class 1 valves. Therefore, a commitment is provided in Table A-1 of this Appendix to perform a fatigue evaluation in accordance with the requirements of the ASME Code of record for the Davis-Besse Class 1 valves greater than 4 inches diameter nominal pipe size. The issue of missing records has been documented in the Davis-Besse Corrective Action Program for resolution.

Enclosure A L-11-292 Page 38 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence A.2.5.1 Pages A-44 & Entire section A-45 In response to Supplemental RAI 4.6-1, LRA Section A.2.5.1, Containment Vessel, is revised to read as follows:

A.2.5.1 Containment Vessel The containment vessel is a Class B vessel as defined in the ASME Section III, Paragraph N-132, 1968 Edition through Summer Addenda 1969. The containment vessel meets the requirements for Paragraph N-415.1 of ASME Section III, thereby justifying the exclusion of cyclic or fatigue analyses in the design of the containment vessel. Analysis of 400 pressure cycles (from -0.67 psig to 45 psig) and 400 temperature cycles (from 30°F to 120°F) were performed against the requirements of ASME Section III, Paragraph N-415.1. The 400 cycles were based on a conservative estimate of anticipated cycles for 40 years of operation. Details of the ASME Section III, Paragraph N-415 analysis are as follows.

N-415.1(a)

The number of times (including startup and shutdown) that the pressure will be cycled from atmospheric pressure to operating pressure and back to atmospheric pressure must not exceed the number of cycles on Figure N-415(A) corresponding to an Sa value of 3 times Sm.

3 Sm is equal to 56,250 psi and from Figure N-415(A) the corresponding number of cycles is equal to 1,800. The specified number of 400 pressure cycles is less than the 1,800 cycles from Figure N-415(A). Therefore, the condition in N-415.1(a) is met.

N-415.1(b)

Specified full range of pressure fluctuations may not exceed the quantity 1/3 x design pressure x Sa/Sm. Sa is the value from Figure N-415(A) for 400 cycles.

1/3 x 36 x 125,000/18,750 = 80 psi Specified full range of pressure fluctuations is 45 psi (-25 to 20 psi) and is less than 80 psi. Therefore, the condition in N-415.1(b) is met.1

Enclosure A L-11-292 Page 39 of 52 N-415.1(c)

The temperature difference in degrees F between any two adjacent points during normal operation and during startup and shutdown must not exceed Sa/(2E).

For a mean temperature of 70°F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =

358°F.

Temperature cycle range of 90°F (from 30°F to 120°F) is less than 358°F.

Therefore, the condition in N-415.1(c) is met.

N-415.1(d)

The temperature difference in degrees F between any two adjacent points does not change during normal operation by more than Sa/(2E).

For a mean temperature of 70°F, 120,000 / 2(27.9 x 106)(6.07 x 10-6) =

358°F Temperature cycle range of 90°F (from 30°F to 120°F) is less than 358°F.

Therefore, the condition in N-415.1(d) is met.

1 The pressure cycle range used in the fatigue waiver evaluation is from -25 to 20 psi for a full range pressure fluctuation of 45 psi. However, the possible full range pressure fluctuation is from -0.67 to 45 psig based on the containment vessel design allowable negative pressure of -0.67 psig and the containment vessel pneumatic test pressure of 45 psig (design pressure of 36 psig times 1.25). This adjusted full range pressure fluctuation of 45.67 psi is less than the 80 psi value determined in N-415.1(b) above. Therefore, the condition in N-415.1(b) is met.

The 60-year projected cycles for plant heatup and cooldown are 128 (shown in Table 4.3-1) and are less than the specified 400 pressure cycles and 400 temperature cycles. Therefore, the values of 400 pressure cycles and 400 temperature cycles used to exclude fatigue analyses will not be exceeded for 60 years of operation.

The TLAA associated with exclusion of the containment vessel from fatigue analyses per ASME Section III, Paragraph N-415.1 remains valid for the period of extended operation in accordance with 10 CFR 54.21(c)(1)(i).

Enclosure A L-11-292 Page 40 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence A.2.7.6 Page A-50 New Section In response to Supplemental RAI OIN-378, new LRA Section A.2.7.6, Crane Load Cycles, is added as follows:

A.2.7.6 Crane Load Cycles The load cycle limits for cranes was identified as a potential TLAA. The following Davis-Besse cranes are in the scope of License Renewal and have been identified as having a TLAA, which requires evaluation for 60 years:

  • containment polar crane (including auxiliary hoist)
  • reactor service crane
  • spent fuel shipping cask crane (including auxiliary hoist)
  • intake structure gantry crane These cranes are designed in accordance with Bechtel design specifications.

These specifications require that the cranes shall be designed in accordance with the minimum requirements for Class A cranes as stated in Crane Manufacturers Association of America (CMAA) Specification 70 for Electric Overhead Traveling Cranes, except as the requirements are extended by the Bechtel specification; and, in the case of conflict, that the more stringent requirements shall govern.

Class A cranes are designed for up to 100,000 load cycles.

Containment Polar Crane (including Auxiliary Hoist)

The estimated number of cycles for 60 years of operation is bounded by 22,000 cycles. Less than 500 cycles are due to the main hoist with the remaining cycles due to the auxiliary hoist. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 22,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the containment polar crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.

Reactor Service Crane The estimated number of cycles for 60 years of operation is bounded by 8,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In

Enclosure A L-11-292 Page 41 of 52 addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 8,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the reactor service crane load cycle assumption remains valid for the period of extended operation.

Spent Fuel Shipping Cask Crane (including Auxiliary Hoist)

The estimated number of cycles for 60 years of operation is bounded by 18,000 cycles. The rate of occurrence is based on refueling outages, mid cycle outages with core off load and the final core off load at the end of 60 years of operation. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 18,000 cycles. Also, 3,600 cycles are estimated for crane usage during non-outage periods and are included in the estimate of 18,000 cycles. Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the spent fuel shipping cask crane (including auxiliary hoist) load cycle assumption remains valid for the period of extended operation.

Intake Structure Gantry Crane The estimated number of cycles for 60 years of operation is bounded by 1,700 cycles. The rate of occurrence is based on crane usage through out the calendar year at 20 cycles per year. In addition, 500 cycles are estimated for the pre-operational construction period and are included in the estimate of 1,700 cycles.

Since the total number of cycles is at the low end of the allowable design value of up to 100,000 cycles, the intake structure gantry crane load cycle assumption remains valid for the period of extended operation.

Therefore, the crane load cycle assumptions remain valid for the period of extended operation in accordance with 10 CFR 54.21(c)(1)(i).

Enclosure A L-11-292 Page 42 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table A-1 Pages A-65 Commitment No. 20, sixth bullet, and and A-69 New Commitment 26 In response to Supplemental RAI B.2.39-11, a portion of the sixth bulleted item in license renewal future Commitment 20 in LRA Table A-1, Davis-Besse License Renewal Commitments, is transferred to new license renewal future Commitment 26, which was previously revised to Not used in FENOC letter dated September 16, 2011 (ML11264A059),

and the Implementation Schedule is revised from April 22, 2017, to December 31, 2014, as follows:

Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments 20 x Obtain and evaluate for degradation a concrete core bore from Prior to LRA A.1.39 two representative inaccessible concrete components of an in- April 22, 2017 and B.2.39 scope structure subjected to aggressive groundwater prior to entering the period of extended operation. Based on the results of the initial core bore sample, evaluate the need for collection FENOC Responses to and evaluation of representative concrete core bore samples at Letters NRC RAIs additional locations that may be identified during the period of L-11-153 B.2.39-3, extended operation as having aggressive groundwater and B.2.39-4, infiltration. Select additional core bore sample locations based L-11-237 B.2.39-5, on the duration of observed aggressive groundwater infiltration. B.2.39-6 and Perform an inspection for loss of material for carbon steel B.2.39-7 structural components subject to aggressive groundwater. from Require the use of the FENOC Corrective Action Program for NRC Letter identified concrete or steel degradation. dated April 5, 2011,

Enclosure A L-11-292 Page 43 of 52 Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments and RAIs B.2.39-11 and 3.5.2.3.12-4 from NRC Letter dated July 21, 2011

Enclosure A L-11-292 Page 44 of 52 Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments 26 Obtain and evaluate for degradation a concrete core bore from two Prior to FENOC Responses to representative inaccessible concrete components of an in-scope December 31, Letters NRC RAI structure subjected to aggressive groundwater prior to entering the 2014 L-11-153, B.2.39-3 from period of extended operation. Based on the results of the initial core L-11-237, NRC Letter bore sample, evaluate the need for collection and evaluation of and dated representative concrete core bore samples at additional locations L-11-257 April 5, 2011, that may be identified during the period of extended operation as RAI B.2.39-11 having aggressive groundwater infiltration. Select additional core from bore sample locations based on the duration of observed NRC Letter aggressive groundwater infiltration. Document identified concrete or dated steel degradation in the FENOC Corrective Action Program. July 21, 2011, and Supplemental Not used. RAI B.2.39-11 from telecon held with the NRC on September 13, 2011

Enclosure A L-11-292 Page 45 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table A-1 Page A-68 Commitment No. 21, new bullet A new 7th bulleted commitment is added to existing Commitment 21, Water Control Structures Inspection Enhancements, in response to Supplemental RAI OIN-379. LRA Table A-1, Davis-Besse License Renewal Commitments, Commitment 21, is revised to include the new commitment bullet, as follows:

Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments 21 x Require that loose bolts and nuts, cracked high strength bolts, Prior to LRA A.1.40 and degradation of piles and sheeting (sheet pilings) are April 22, 2017 B.2.40 accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based FENOC Responses to on codes, specifications and standards such as American Letters NRC RAI Institute of Steel Construction (AISC) specifications, Structural L-11-153 B.2.39-6 from Engineering Institute / American Society of Civil Engineers and NRC Letter (SEI/ASCE) 11, and codes, specifications or standards L-11-292 dated referenced in the Davis-Besse current licensing basis. April 5, 2011, and Supplemental RAI OIN-379 from Region III 71002 Inspection

Enclosure A L-11-292 Page 46 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table A-1 Page A-69 Commitment No. 46 In response to RAI 4.3.2.3.2 (Supplement), license renewal future Commitment No. 46 previously added in FENOC letter dated July 22, 2011 (ML11208C274), is no longer needed and is revised to read Not used, as follows:

Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments 46 FENOC commits to perform a fatigue evaluation in accordance with Prior to LRA 4.3.2.3.2 the requirements of the ASME Code of record for the Davis-Besse April 22, 2015 A.2.3.2.13 Class 1 valves that are greater than 4 inches diameter nominal pipe size. The applicable valve identification numbers are CF28, CF29, FENOC Response to CF30, CF31, DH76, DH77, DH11, DH12, DH1A, DH1B, DH21 and Letter NRC RAI 4.1-1 DH23. L-11-218 from NRC Letter dated Not used.

May 2, 2011

Enclosure A L-11-292 Page 47 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence Table A-1 Page A-69 Commitment 47 License renewal future Commitment 47 is revised based on the response to Supplemental RAI B.2.22-7 regarding examination of Containment penetrations, and LRA Table A-1, Davis-Besse License Renewal Commitments, is revised to read as follows:

Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments 47 Enhance the Inservice Inspection (ISI) Program - IWE to: Prior to LRA A.1.22 April 22, 2017 x Include surface examinations to monitor for cracking of stainless and B.2.22 steel Containment penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The FENOC Responses to inspection sample size will include 10 percent of the Letters NRC RAI containment penetration population that are subject to cyclic L-11-238 B.2.22-7 from loading but have no current licensing basis fatigue analysis. and NRC Letter Penetrations included in the inspection sample will be L-11-292 dated scheduled for examination in each 10-year ISI interval that July 21, 2011, occurs during the period of extended operation. Should fatigue and analyses be performed in the future for the subject containment Supplemental penetrations, the surface examinations will no longer be RAI B.2.22-7 required. from NRC

Enclosure A L-11-292 Page 48 of 52 Table A-1 Davis-Besse License Renewal Commitments Related LRA Item Implementation Commitment Source Section No./

Number Schedule Comments Telecons on September 13 and 16, 2011

Enclosure A L-11-292 Page 49 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence B.2.12 Page B-61 Detection of Aging Affects, 1st Sentence In response to Supplemental RAI OIN-377, LRA Section B.2.12, Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program, Detection of Aging Effects paragraph, first sentence, is revised to read as follows:

x Detection of Aging Effects As described above in Parameters Monitored or Inspected, the Electrical Cables and Connections Not Subject to 10 CFR 50.49 Environmental Qualification Requirements Program provides for a visual inspection of a representative sample of all accessible electrical cables and connections located in adverse localized environments. The visual inspections will be performed on a 10-year interval, with the first inspection taking place within the 10-year period prior to the end of the current operating license. The program will inspect the accessible cables and connections for aging effects due to adverse localized environments caused by heat, radiation, or moisture, in the presence of oxygen. The visible effects of aging are embrittlement, discoloration, cracking, and surface contamination. The visible evidence of aging (on the cable jackets and the connection insulating bases) is considered representative of aging to the cable insulation and the connection insulation.

Enclosure A L-11-292 Page 50 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence B.2.22 Page B-96 Program Description subsection, first paragraph; and, Enhancements subsection In response to Supplemental RAI B.2.22-7, LRA Section B.2.22, Inservice Inspection (ISI) Program - IWE, Program Description, previously revised in FENOC letter dated August 17, 2011 (ML11231A966), is revised to split the first paragraph of the Program Description into two paragraphs, and to add more detail to the Parameters Monitored and Inspected Enhancement, as follows:

B.2.22 INSERVICE INSPECTION (ISI) PROGRAM - IWE Program Description The Inservice Inspection (ISI) Program - IWE establishes responsibilities and requirements for conducting ASME Code Section XI, Subsection IWE inspections as required by 10 CFR 50.55a. The Inservice Inspection (ISI) Program - IWE includes examination and/or testing of accessible surface areas of the steel containment vessel; containment hatches and airlocks; seals, gaskets and moisture barriers; and containment pressure-retaining bolting. These examinations are in accordance with the requirements of the ASME Code,Section XI, 1995 Edition through the 1996 Addenda.

The program will include surface examinations to monitor for cracking of Ccontainment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required. In addition, the 10 CFR Part 50 Appendix J Program provides for verification that a general visual inspection of the accessible interior and exterior surfaces of the primary containment and components (includes penetrations) has been performed prior to the integrated leak rate test (ILRT) pressurization to identify evidence of structural deterioration that might affect either the primary containment structural integrity or leak tightness.

Enclosure A L-11-292 Page 51 of 52 Enhancements The following enhancement will be implemented in the identified program element prior to the period of extended operation.

x Parameters Monitored or Inspected The Inservice Inspection (ISI) Program - IWE will include surface examinations to monitor for cracking of Ccontainment stainless steel penetration sleeves, dissimilar metal welds, bellows, and steel components that are subject to cyclic loading but have no current licensing basis fatigue analysis. The inspection sample size will include 10 percent of the containment penetration population that are subject to cyclic loading but have no current licensing basis fatigue analysis. Penetrations included in the inspection sample will be scheduled for examination in each 10-year ISI interval that occurs during the period of extended operation. Should fatigue analyses be performed in the future for the subject containment penetrations, the surface examinations will no longer be required.

Enclosure A L-11-292 Page 52 of 52 Affected LRA Section LRA Page No. Affected Paragraph and Sentence B.2.40 Page B-163 Enhancements - Acceptance Criteria, new [last] paragraph In response to Supplemental RAI OIN-379, LRA Section B.2.40, Water Control Structures Inspection, Enhancements - Acceptance Criteria subsection, is revised to include a new paragraph at the end of the section, as follows:

The Structures Monitoring Program procedure, which implements the Water Control Structures Inspection, will be enhanced to require that loose bolts and nuts, cracked high strength bolts, and degradation of piles and sheeting (sheet pilings) are accepted by engineering evaluation or subject to corrective actions. Engineering evaluation will be documented and based on codes, specifications and standards such as American Institute of Steel Construction (AISC) specifications, Structural Engineering Institute / American Society of Civil Engineers (SEI/ASCE) 11, and codes, specifications or standards referenced in the Davis-Besse current licensing basis.

Enclosure B Davis-Besse Nuclear Power Station, Unit No. 1 (DBNPS)

Letter L-11-292 Revised DBNPS License Renewal Application Boundary Drawing 1 page (not including this cover page)

The following License Renewal Application Boundary Drawing is revised and is enclosed:

LR Drawing LR-M0016A Revision 2

12 17 17 12 12 17 HIGHLIGHTING CONTINUED ON LR-M017C LR NOTE B LR NOTE C HIGHLIGHTING CONTINUED ON LR-M269P LR NOTES:

A. FOR GENERAL LICENSE RENEWAL NOTES REFER TO LR-M001-01.

B. COMPONENTS HIGHLIGHTED GREEN ON THIS DRAWING ARE IN SCOPE FOR (A)(3)-FIRE PROTECTION. THE MAIN FLOW PATHS REQUIRED TO PERFORM THE (A)(3) FUNCTION, AND BRANCH LINES TO AND INCLUDING THE FIRST VALVE, ARE IN SCOPE.

COMPONENTS THAT ARE NOT HIGHLIGHTED ARE NOT LOCATED IN SAFETY-RELATED AREAS WHERE (A)(2)-NSAS CONSIDERATIONS ARE A CONCERN, AND ARE THEREFORE NOT IN SCOPE.

C. THE SPRINKLER SYSTEM IN THE DIESEL FIRE PUMP ROOM IS WITHIN THE SCOPE OF LICENSE RENEWAL.

LICENSE RENEWAL BOUNDARY DRAWING LR-M016A REV. 2 SYSTEMS SHOWN ON THIS DRAWING:

12: FIRE PROTECTION 17: DIESELS

Retrieved from "https://kanterella.com/w/index.php?title=ML11294A331&oldid=2110867"