ML18151A723: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 17: | Line 17: | ||
=Text= | =Text= | ||
{{#Wiki_filter: | {{#Wiki_filter:... "'/*,*~ .. . -- ..:~: ... **-* ... | ||
Date g./]-C/1 Date ------- | I | ||
*---. _-. *-..... :r.~.--.. -~** ... *-*'*----------.**.**.*;:.:::-,;~..::-- | .I I I | ||
__ *;._.:.--_. | NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 PROBABILISTIC SAFETY ANALYSIS PRODUCTS NUCLEAR SAFETY ANALYSIS MANUAL PART IV, CHAPTER A PROBABILISTIC SAFETY ASSESSMENT PRODUCTS Revision No. 1 Effective Date: July, 1997 Nuclear Safety Analysis | ||
* .. *. '-~-~.>~*-::..-***;, *--* ,., NULCEAR SAFETY ANALAYSIS MANUAL -PART IV, CHAPTER A, REVISION 1 | * Nuclear Analysis and Fuel Virginia Power 1m. Prepared By | ||
* PROBABILISTIC SAFETY ANALYSIS PRODUCTS TABLE OF CONTENTS 1. 0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.0 PSA MODEL UPDATE FREQUENCY | '?J/?fq') | ||
.............................. | Date g./]-C/1 Date | ||
3 3.0 PSA PRODUCTS 3 4 . 0 REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 | * -- ----- | ||
----- - -9808180176 980813 PDR ADOCK 05000280 G | |||
- | |||
PDR | |||
*- --. _-.*- ..... :r.~.-- .. -~** ... *-*'*----------.**.**.*;:.:::-,;~..::-- __ *;._.:.--_. * .. *. '- ~-~.>~*-::..-***;, *--* ,., | |||
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 | |||
* PROBABILISTIC SAFETY ANALYSIS PRODUCTS TABLE OF CONTENTS | |||
: 1. 0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.0 PSA MODEL UPDATE FREQUENCY .............................. 3 3.0 PSA PRODUCTS 3 | |||
==4.0 REFERENCES== | |||
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 | |||
* | * | ||
* NULCEAR SAFETY ANALAYSIS MANUAL -PART IV, CHAPTER A, REVISION 1 PROBABILISTIC SAFETY ANALYSIS PRODUCTS REVISION | * Page 2 | ||
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 | |||
* PROBABILISTIC SAFETY ANALYSIS PRODUCTS REVISION | |||
==SUMMARY== | ==SUMMARY== | ||
==1.0 INTRODUCTION== | REV. NO. DESCRIPTION 1 Revision 1 adds requirements contained in STD-GN-0044 and VPAP-2604 to the list of PSA products and customers . | ||
* Page 3 | |||
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 | |||
* PROBABILISTIC SAFETY ANALYSIS PRODUCTS | |||
==1.0 INTRODUCTION== | |||
The purpose of this chapter is to provide a simple listing of the major PSA products required by Reference | The purpose of this chapter is to provide a simple listing of the major PSA products required by Reference 1. Section 2.0 discusses maintenance of the PSA models which are the primary PSA products. | ||
Section 3 presents a list of the PSA products. | Section 3 presents a list of the PSA products. | ||
2.0 PSA MODEL UPDATE FREQUENCY The primary products produced by the PSA group are the North Anna and Surry PSA models. In order to support the safe and efficient operation of the stations it is a requirement that the models be updated periodically to_ what has been called the II as-built operated II condition of the station. Therefore, periodic model revisions should be made corresponding roughly to the refueling outage schedules since this is the time that most plant changes are implemented. | 2.0 PSA MODEL UPDATE FREQUENCY The primary products produced by the PSA group are the North Anna and Surry PSA models. In order to support the safe and efficient operation of the stations it is a requirement that the models be updated periodically to_ what has been called the II as-built as-operated II condition of the station. Therefore, periodic model revisions should be made corresponding roughly to the refueling outage schedules since this is the time that most plant changes are implemented. Since the refueling is performed at about 18 month intervals this is the appropriate interval for revisions. It should be noted however, that an update could be made at any time deemed appropriate by management to account for an intermediate outage or to allow for other model revisions. | ||
Since the refueling is performed at about 18 month intervals this is the appropriate interval for revisions. | Model revisions are classified as updates if the change is to account for facility modifications, equipment reliability or unavailability data update, or human reliability and plant specific operating events. If the revision is to account for model improvments or computer code enhancements the process is called an upgrade. More frequent updates can be made if plant hardware or procedure modifications significantly impact the model or if the state-of-the-art changes such that an upgrade is required. Every effort should be made to keep these models as similar as possible. In this way, engineering resources are used most efficiently. This approach also achieves a consistent application of PSA at both stations. The output from these revised models are then used in a variety of applications. | ||
It should be noted however, that an update could be made at any time deemed appropriate by management to account for an intermediate outage or to allow for other model revisions. | 3.0 PSA PRODUCTS The company has elected to use PSA as part of the maintenance rule risk ranking process (lOCFR 50. 65 a (2)) . Therefore, the systems, structures and components (SSCs) that meet defined risk | ||
Model revisions are classified as updates if the change is to account for facility modifications, equipment reliability or unavailability data update, or human reliability and plant specific operating events. If the revision is to account for model improvments or computer code enhancements the process is called an upgrade. More frequent updates can be made if plant hardware or procedure modifications significantly impact the model or if the state-of-the-art changes such that an upgrade is required. | * criteria are considered for performance monitoring. Two Page 4 | ||
Every effort should be made to keep these models as similar as possible. | |||
In this way, engineering resources are used most efficiently. | NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 | ||
This approach also achieves a consistent application of PSA at both stations. | * PROBABILISTIC SAFETY ANALYSIS PRODUCTS engineering transmittals (ET) are used for this purpose: ET-NAF-96-0204 for North Anna and ET-97-0051 for Surry. The ETs are revised as necessary to document model revisions. Secondly, the maintenance rule ( 10CFR50. 65 a (3)) requires an evaluation of the components to be taken out of service so that the configuration risk is maintained at an acceptable level. These evaluations have been termed on-line maintenance evaluations. PSA is also used to support this part of the maintenance rule. As a result, whenever the models are updated the list of risk significant SSCs and online maintenance matrix must be updated. This update process should take place within the sixty days of completing the model revision. | ||
The output from these revised models are then used in a variety of applications. | Another area where PSA is currently used is to support operator training. Input to the training departments consists of appropriate material showing the dominant accident sequences. | ||
3.0 PSA PRODUCTS The company has elected to use PSA as part of the maintenance rule risk ranking process (lOCFR 50. 65 a (2)) . Therefore, the systems, structures and components (SSCs) that meet defined risk criteria are considered for performance monitoring. | This material could. take the form of a poster or chart. | ||
Two Page 4 | Individual sequences could be listed and discussed. The product | ||
* to be provided is the signifcant contributors to core damage. The method by which this information is conveyed can change to meet specific user needs. | |||
The Severe Accident Management Guideline (SAMG) Program is controlled by procedure VPAP-2604. The VPAP includes a requirement in Step 5.8 that changes to the IPE must be considered for initiating changes to the SAMGs The intent of the VPAP is to include changes to the PSA model (the PSA model is the replacement to the IPE) . Therefore, one output from a model update is to document the significant changes to the model in an ET that discusses how the dominant sequences have changed since the last update. This discussion should identify any proposed enhancements to station procedures, including the SAMGs, resulting from the PSA model update. The ET can be used to determine the necessary changes to operator training and procedure improvements. | |||
Secondly, the maintenance rule ( 10CFR50. 65 a (3)) requires an evaluation of the components to be taken out of service so that the configuration risk is maintained at an acceptable level. These evaluations have been termed on-line maintenance evaluations. | The list of PSA products is presented in Table 1. This list indicates the product, update frequency and the end user . | ||
PSA is also used to support this part of the maintenance rule. As a result, whenever the models are updated the list of risk significant SSCs and online maintenance matrix must be updated. This update process should take place within the sixty days of completing the model revision. | * Page 5 | ||
Another area where PSA is currently used is to support operator training. | |||
Input to the training departments consists of appropriate material showing the dominant accident sequences. | NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 | ||
This material could. take the form of a poster or chart. Individual sequences could be listed and discussed. | * PROBABILISTIC SAFETY ANALYSIS PRODUCTS Table 1 List of PSA Products Item Product Update End User Frequency 1 NAPS PSA Internal Events 18 mo NSA Model 2 SPS PSA Internal Events 18 mo NSA Model 3 Surry Unit 1 ISI Ranking 60 Days of Nuc Eng | ||
The product to be provided is the signifcant contributors to core damage. The method by which this information is conveyed can change to meet specific user needs. The Severe Accident Management Guideline (SAMG) Program is controlled by procedure VPAP-2604. | .. PSA Model (NDE/ISI) 4 Input to operator - 120 Days of Nuc Training training PSA Model 5 Risk Significant sscs 60 Days of Corporate PSA Model Maintenance Rule Coordinator | ||
The VPAP includes a requirement in Step 5.8 that changes to the IPE must be considered for initiating changes to the SAMGs The intent of the VPAP is to include changes to the PSA model (the PSA model is the replacement to the IPE) . Therefore, one output from a model update is to document the significant changes to the model in an ET that discusses how the dominant sequences have changed since the last update. This discussion should identify any proposed enhancements to station procedures, including the SAMGs, resulting from the PSA model update. The ET can be used to determine the necessary changes to operator training and procedure improvements. | * Tool for on-line 6 60 Days of Scheduling, SNS maintenance evaluation PSA Model and Operations (e .g | ||
The list of PSA products is presented in Table 1. This list indicates the product, update frequency and the end user . Page 5 NULCEAR SAFETY ANALAYSIS MANUAL -PART IV, CHAPTER A, REVISION 1 | * I matrix or safety monitor) 7 List of Risk Significant 60 Days of Scheduling SNS Functional Equipment PSA Model and Operations Groups 8 Reliability and 60 Days of Corporate Unavailability PSA Model Maintenance Rule Allocations In Support of Coordinator and the MR MRWG 9 MOV Risk Ranking (GL 89- 60 Days of Station | ||
* PROBABILISTIC SAFETY ANALYSIS PRODUCTS Table 1 List of PSA Products Item Product Update End User Frequency 1 NAPS PSA Internal Events 18 mo NSA Model 2 SPS PSA Internal Events 18 mo NSA Model 3 Surry Unit 1 ISI Ranking 60 Days of Nuc Eng .. PSA Model (NDE/ISI) 4 Input to operator -120 Days of Nuc Training training PSA Model 5 Risk Significant sscs 60 Days of Corporate PSA Model Maintenance Rule Coordinator | : 10) PSA Model Maintenancece 10 Input To SAMG 60 Days of Supervisor PSA Model Nuclear Safety Analysis | ||
* | * Page 6 | ||
* I matrix or safety monitor) 7 List of Risk Significant 60 Days of Scheduling SNS Functional Equipment PSA Model and Operations Groups 8 Reliability and 60 Days of Corporate Unavailability PSA Model Maintenance Rule Allocations In Support of Coordinator and the MR MRWG 9 MOV Risk Ranking (GL 89-60 Days of Station 10) PSA Model Maintenancece 10 Input To SAMG 60 Days of Supervisor PSA Model Nuclear Safety Analysis | |||
* Page 6 | NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 | ||
* PROBABILISTIC SAFETY ANALYSIS PRODUCTS | |||
==4.0 REFERENCES== | |||
: 1) Probabilistic Safety Assessment Analysis, Nuclear Analysis and Fuel Implementing Procedure (NAF-239, Rev 0), January, 1997. | |||
: 2) Supplemental Maintenance Rule Guidelines, STD-GN- 0 044, June 30, 1997. | |||
: 3) Severe Accident Management Guideline (SAMG) Program, VPAP-2604, Revision o, June 10, 1997 . | |||
* Page 7 | |||
* ENCL0SURE2 REVISED RISK-BASED INSERVICE INSPECTION PLAN SURRY POWER STATION UNIT 1 (Note 1 to the examination method in the enclosed inspection plan indicates that if the location is a socket weld, a relief request from the Code required volumetric examination will be submitted at a later date providing an alternative examination.) | |||
* | * | ||
==4.0 | ------- | ||
: 1) | *** --------- | ||
* | |||
* Dra'l\ing No. !\lark No. Line Number Period Category Item No. ISi Oass Credit Method 11448-CBB-04 I A-3 1001 l"-VS-23-151 3 R-A RI.I I 38 y UT(!) | |||
ReUcf Request Revision Comments RBISI NOTE: Perform UT examination on weld nearest valve 1-VS-PCV-533 on Segment VS-001 line 1"-VS-23-151. There is no weld number 1001, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan. | |||
11448-CBB-04 l A-3 1002 IY,''-CHR-151 3 R-A Rl.12 38 y VT-2/PT ReUef Request Revision Comments RBISI NOTE: Perform PT examination on !st weld on discharge side of pump I-VS- Segment VS-002 P-2B on line I Y,''-CHR-151. There is no weld number I 002, this is used only to sort the database. New with Rev. I to the RBISI plan: PT examination augmented by subpanel, and added VT-2 each refueling outage. | |||
11448-CBl\1-071B-3 1001 l 1,1:"-WS-74-2 !X R-A RI.I I 38 y UT(!) | |||
ReUef Request Revision* Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I Y,''-WS-74-2 IX Segment SW-044 on valve 1-SW-115 side of reducer. There is no weld number 1001, this is used only to sort the database. Changed PT to UT, with Rev. 1 to the RBISI plan. | |||
11448-CBM-07IB-3 1002 I Y,"-WS-75-21X R-A RI.I I 38 y UT(!) | |||
ReUef Request Revision Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I V,"-WS-74-2IX Segment SW-045 on valve l-SW-110 side of reducer. There is no weld number 1002, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan. | |||
11448-CB1\1-07IB-3 1003 I V,"-WS-450-2 IX 3 R-A RI.II 38 y UT(!) | |||
Relief Request Re,*lslon Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I V."-WS-450- Segment SW-046 2 IX on valve I-SW-896 side of reducer. There is no weld number 1003, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS I plan. | |||
11448-CBl\1-07 IB-3 1004 l'/,"-WS-451-21X 3 R-A RI.I I 38 y UT(!) | |||
ReUef Request Revision Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I Y,''-WS-451- Segment SW-047 2 IX on valve 1-SW-897 side of reducer. There is no weld number 1004, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan. | |||
11448-CBl\1-071 B-3 1005 2"-WS-560-21X 3 R-A y RI.I I 38 UT(!) | |||
Relief Request Revision Comments RBIS! NOTE: Perform UT examination on weld at tee on line 2"-WS-560-21X Segment SW-054 (where 2"-WS-560-2 IX connects to I V,"-WS-450-21X) on line 1"-WS-571-21X side of tee. There is no weld number 1005, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan. | |||
11448-l\1KS-1022AI 1-2 1001 3"-CC-820-1501 R-A y RI.I! 38 UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on the weld nearest to penetration #110 on Segment CC-28B line 3"-CC-820-150 I. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: MT augmented by subpanel. | |||
11448-MKS- I 022AI 2-3 1001 2W'-CC-88-15 I R-A Rl.12 38 y VT-2/UT/MT RcUef Request Comments RBIS! Note: Perform UT/PT or UT/MT on the 1st weld downstream of 4"x2V," Segment CC-28A reducer on line 2\l,''-CC-88-151. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: 1 TT/MT augmented by subpanel, VT-2 each refueling outage. | |||
RBISI Plan Sorted by Drawing nnd Mnrk No., SPSU13 Database Page 1 of 18 Print Date: 7/29/98 | |||
*** | |||
* Method | |||
!\lark No. Line Nwnber Period Category Item No. ISI Oass Credit 11448-MKS-1022A 12-3 1002 I \/2"-CC-803-150 I R-A Rl.12 38 y VT-2/PT Relief Request Revision Comments RBIS! Note: Perform PT examination on weld connecting 4"xl 'h" reducer on line* Segment CC-28A l 'h"-CC-803-150 I. Note there is no mark/weld number 1002, this is used to sort the | |||
!SI database only. New with Rev. 1 to the RBIS! plan: PT augmented by subpanel, VT-2 each refueling outage. | |||
11448-MKS-1105812-1 1001 3"-CH-99-152 R-A RI.I! 28 y UT(!) | |||
Relief Request Re,*islon Comments RBIS! Note: Perform UT examination on weld nearest penetration #19 on line 3"-CH- Segment CH-005 99-152. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Changed PT to UT. | |||
11448-MKS-1122A4-1 1001 3"-WGCB-I-601 R-A RI.IS 28 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT OR UT/MT on the weld nearest to penetration #39 on Segment BD-0028 line 3"-WGCB-1-601. Also see drawing 11448-CBM-124A-3. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI. I!, Segment in FAC program, and UT/MT (R 1.11) is secondary damage mechanism. | |||
11448-~IKS-1122A4-1 1002 3"-WGCB-105-601 R-A Rl.18 NC y UT/MT Relief Request Comments RBIS! Note: Perform UT/PT OR UT/MT on weld at elbow downstream of valve 1- Segment BD-003 BD-150 on line 3"-WGCB-105-601. Also see drawing 11448-CBM-124A-3. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (Rl.11) is secondary damage mechanism. | |||
11448-MKS-! !22A5-l 1001 3"-WGCB-2-601 R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on the elbow to reducer weld upstream of Segment BD-0058 valve TV-BD-IOOD on line 3"-WGCB-2-601. Note there is no mark/weld number 1001, this is used to sort the ISi databasey only. New with Rev. 1 to the RBIS! plan: | |||
Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (RI.I!) is secondary damage mechanism. | |||
11448-MKS-l 122A5-1 1002 3"-WGCB-106-601 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on branch tee weld connecting line 3"- Segment BD-006 WGCB-2-601 to line 3"-WGCB-106-601. The weld to be examined is on line 3"- | |||
WGCB-106-601. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. 1 to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (Rl.11) is secondary damage mechanism. | |||
11448-MKS-1122A6-l 1001 3"-WGCB-3-601 R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on weld connecting at 3rd elbow from Segment BD-0088 penetration #40 on line 3"-WGCB-3-601. Note there is no mark/weld number 100 !, | |||
this is used to sort the ISi database only. New with Rev. 1 to the RBIS! plan: | |||
Change item No. to Rl.18 from RI.! 1, Segment in FAC program, and UT/MT (RI.I!) is secondary damage mechanism. | |||
**------------------ - - - - - - - - - - - | |||
RRISI Plan Sorted by Drawlne and l\lark No., SPSU13 Database Page 2 of 18 Print Date: 7/29198 | |||
*** | |||
* Dra\\ing No. Mark No. Line Nmnber Period Category Item No. ISi Dass Credit Method l 1448-l\lKS-l l22A6-l 1002 3"-WGCB-107-601 R-A Rl.18 NC y UT Relief Request Re,*lslon Comments RBIS! Note: Perform UT examination on I" weld at 3"xl" Tee that connects to 3"- Segment 8D-009 WGCB-107-601 downstream of valve 1-BD-170. Note there is no mark/weld number I 002, this is used to sort the !SI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment in FAC program, and UT (R 1.11) is secondary damage mechanism. | |||
l 1448-MKS-l l2L2-2 1001 3"-CC-820-1501 R-A RI.I I 38 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on the weld at elbow nearest to penetration Segment CC-29 | |||
#110 on line 3"-CC-820-150 I. Note there is no mark/weld number 100 I, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Added that MT augmented by subpanel. | |||
l 1448-MKS-131Al-4 1001 3"-SHP-57-601 R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT or UT/PT examination on weld at tee connecting Segment MS-032 line 3"-SHP-57-601 and 3"-SHP-31-601 on 3"-SHP-57-601 side of tee. Note there is no mark/weld number I 00 I, this is used to sort the !SI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (RI. I I) is secondary damage mechanism. | |||
I 1448-MKS-131Al-4 1002 3"-SHP-57-60 I R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT or UT/PT examination on weld nearest valve 1-PCV- Segment MS-033 MS-1028 on line 3"-SHP-57-601. The weld to be examined is on the same side ofthe valve l-PCV-MS-102B as VSS-9. Note there is no mark/weld number 1002, this is used to sort the ISI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from.RI.I I, Segment in FAC program, and Uf/MT (Rl.11) is secondary damage mechanism. | |||
l 1448-MKS-131Al-4 1003 3"-SHP-57-60 I R-A Rl.18 y 28 VT-2 Relief Request Revision Comments RBIS! NOTE: New with Rev. I. Segment is in the F AC program. VT-2 (Rl.12) is Segment MS-034 the secondary damage mechanism. VT-2 each refueling outage. | |||
11448-None AFW Lube Oil Cooler Piping For P-38 - - - - - --------- | |||
3 R-A Rl.13 NC y UT-Thickness Relief Request Revision Comments RBIS! Note: Perform UT Thickness, VT-2 (Rl.12) is secondard damage mechanism, Segment AFW-32 VT-2 each refueling outage. | |||
11448-None AFW Lube Oil Cooler Piping For P-2 R-A Rl.13 NC y UT-Thickness Relief Request Revision Comments RBIS! Note: Perform UT Thickness, VT-2 (Rl.12) is secondard damage mechanism, Segment AFW-30 VT-2 each refueling outage. | |||
11448-None AFW Lube Oil Cooler Piping For P-3A 2 R-A Rl.13 NC y UT-Thickness Relief Request Revision Comments RBIS! Note: Perform UT Thickness, VT-2 (Rl.12) is secondard damage mechanism, Segment AFW-31 VT-2 each refueling outage. | |||
RHISI Plan Sorted by Drawing and 1\lark No., SPSU13 Database Page 3 of /8 Print Date: 7129198 | |||
*** | |||
* Dral\ing No. Mark No. Line Number Period Category Item No. ISi Dass Credit Method 11448-WFPD-13 1001 14"-WCPD-37-301 2 R-A Rl.18 NC y UT/MT Relief Request Re,*lslon Comments RBIS! NOTE: Perform UT/MT examination on weld at reducer l-CN-PSFR-22 on Segment FW-001 14" side on line 14"-WCPD-37-30 I. Note there is no mark/weld number 100 I, this is used to sort the !SI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment is in FAC program, and UT/MT (RI.I I) is secondary damage mechanism. | |||
11448-WFPD-13 1002 16"-WHPD-3-301 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT examination on weld connecting piece 1-SD-PSFl- Segment FW-002 59 to piece l-SD-PPS-258 on line 16"-WHPD-3-301. Note there is no mark/weld number I 002, this is used to sort the ISi database only. New with Rev. I to the RBISI plan: Change item No. to Rl.18 from RI.I I, Segment is in FAC program, and UT/MT (RI.I I) is secondary damage mechanism. | |||
11448-WFPD-13 1003 ! 8"-WCPD-33-30 I 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT examination on weld nearest pump 1-FW-P-IA on Segment FW-003 line 18"-WCPD-33-301. Note there is no mark/weld number 1003, this is used to sort the !SI database only. New with Rev. 1 to the RBISI plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (Rl.11) is secondary damage mechanism. | |||
11448-WFPD-13 1004 18"-WCPD-32-301 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBISI NOTE: Perform UT/MT examination on weld nearest pump 1-FW-P-IB on Segment FW-004 line l 8"-WCPD-32-301. Note there is no mark/weld number 1004, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (Rl.11) is secondary damage mechanism. | |||
11448-WFPD-14 IOOI 14"-WCPD-71-301 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/Mt examination on weld nearest and upstream ofR0- Segment FW-005 109A on line 14"-WCPD-71-301. (This should be a weld on piece l-CN-PPS-127 nearest to R0-109A.) Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBISI plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (RI.I I) is secondary damage mechanism. | |||
11448-WFPD-15 IOOI !8"-WFPD-1-901 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBISI NOTE: Perform UT/MT examination on weld nearest and downstream of Segment FW-006 check valve !-FW-127 on line 18"-WFPD-1-901, on piece l-FW-PSF2-3. (Also see drawing 11448-FM-068A- valve No. is shown on the FM drawing.) Note there is no mark/weld number IOO I, this is used to sort the ISI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (Rl.11) is secondary damage mechanism. | |||
RIIISI Plan Sorted by Dral\ing and Mark No., SPSU13 Database Page 4 of 18 Print Date: 7129/98 | |||
*** | |||
* Dra\\ing No. !\lark No. Line Nwnber Period Category Item No. ISi Class Credit Method | |||
======= | |||
11448-WFPD-17 1001 18"-WFPD-2-901 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT examination on weld nearest and downstream of Segment FW-007 check valve I-FW-112 on line 18"-WFPD-2-901, on piece l-FW-PSF2-18. (Also see drawing I 1448-FM-068A-valve No. is shown on the FM drawing.) Note there is no mark/weld number 100 I, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment is in FAC program, and UT&,IT (R 1.11) is secondary damage mechanism. | |||
11448-WMKS-OIOOAIZ 1-01 1'/z"-CH-97-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New to plan with Rev. 3 to plan. Designated weld as Segment CH-008 terminal end due to licensing concerns (John Lewis). See memo Paul to Lewis of8-16-94. Replaces weld 1-06 on same line No. & drawing No. New with Rev. 5 to Plan: Weld 1-01 reported as being inaccessible by Dan Jensen on 9-15-95. Weld 1-06 added back into plan in order to keep the weld selection percentages the same. | |||
Relief Request SR-014 submitted to report that terminal end weld (weld 1-01) cannot be examined unless the pump is disassembled. New with Rev. 8 to plan: Weld is scheduled for exam. during the 1997 refueling outage because the pump was disassembled. RBIS! Note: Perform PT/VT-2 examination. New with Rev. I to the RBIS! plan: Vf-2 each refueling outage, and PT is augmented by subpanel. | |||
11448-WMKS-OIOOAIZ 1-03 1'/z"-CH-97-1507. 2 R-A Rl.12 IA y PT/VT-2 Relief Request Re\'lslon Comments SOCKET WELD, (WEPSOK). RBISI Note: Perform PT & Vf-2 examination. Segment CH-008 New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOOAIZ 1-07 I V,"-CH-97-1502 2 R-A Rl.12 IA y PT/Vf-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! Note: Perform PT & VT-2 examination. Segment CH-008 New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOOAIZ 1-19 2"-CH-97-1502 R-A Rl.12 y IA PT/VT-2 Relief Request Revision Comments SOCKET WELD , (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment CH-011 Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
I 1448-WMKS-OIOOA4Z l-07A 2"-RC-53-1502 R-A y Rl.12 IA VT-2/PT Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment RC-027 Rev. 1 to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel.) Changed Mark No. from 1-07 to l-07A, (weld 1-07 was cut out and replaced with l-07A). Changed Item No. from Rl.11 to Rl.12. | |||
I 1448-WMKS-OIOOA6Z 1-02 2"-RC-198-1502 R-A Rl.12 IA y PT/Vf-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT/VT-2 examination. Segment RC-037 New with Rev. 1 to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel). | |||
------*---------------------*- | |||
RBIS! Pian Sorted by Dra\\ing and Mark No., SPSU13 Database Page 5 of 18 Print Date: 7129198 | |||
*** | |||
* Dra_"_i~t~~~:- -=-======:===l\=l=a=rk=N=o=.========L=ln=e=N=wn==be=r========P=eri=o=d==c=a=t=e=go=ry===I:=t=em=N=::o=.====::IS=l=Cl::=as=s=====:C:;=r=ed::l:=t=====:=M;=e=:;th~o=d;====== | |||
* 11448-WMKS-OIOOA6Z 1-03 2"-RC-198-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New Segment RC-037 with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOOAZ-l 1-0IDM 29"-RC-1-250 IR R-A RI.I I IA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-001 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE: | |||
Perform UT examination. | |||
11448-WMKS-OIOOAZ-l l-17DM 27'/z"-RC-3-250 IR 3 R-A RI.I I IA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL - NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-013 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE: | |||
Perform UT examination. | |||
11448-WMKS-OIOIAIZ 1-01 l 'lz"-CH-95-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). Terminal End designator add with Rev. 3 to plan. Segment CH-009 RBIS! NOTE: Perform PT & Vf-2 examination. New with Rev. 1 to the RBIS! | |||
plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOIAIZ 1-03 | |||
---- | |||
11/,"-CH-95-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). INSPECTION REQUIRES FLANGE Segment CH-009 SEPERATION. RBIS! NOTE: Perform PT & Vf-2 examination. New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel.) | |||
11448-WMKS-OIOIAIZ 1-04 I V."-CH-95-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New with Rev. 9 to plan: This weld is added to the Segment CH-009 plan to replace weld 1-01 on the same drawing and line number. This weld is an additional weld and is scheduled for examination to ensure that 25% of examination category B-J welds are examined in the event that weld 1-0 I is not examined. Weld 1-01 is inaccessible unless the RCP main flange is disassembled. See relief request SR-014. RBIS! NOTE: Perform PT & Vf-2 examination. New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOIAIZ 1-23 2"-CH-95-1502 R-A y Rl.12 IA PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment CH-012 Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOIA2Z 1-0IBC 2"-RC-57-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments BRANCH CONNECTION WELD, (WEPBC), < 4 IN. NPS. RBIS! NOTE: Segment RC-028 Perform PT examination. New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel). | |||
RBI SI Plan Sorted by Drawing and Mark No., SPSU13 Database Page 6of 18 Print Dare: 7129/98 | |||
Drawing No. | |||
11448-W~IKS-OIOIA3Z Mark No. | |||
1-02 Line Number 2"-RC-199-1502 Period 3 | |||
Category R-A Item No. | |||
Rl.12 ISi Oass IA Credit y PT/Vf-2 | |||
* Method Relief Request Revision Comments Circumferential Piping Weld, (WEPCB). RBIS! NOTE: Perform PT/Vf-2 Segment RC-038 examination. New with Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOIA3Z 1-05 2"-RC-199-1502 3 R-A Rl.12 IA y PT/Vf-2 Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform PT Segment RC-038 examination. New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-OIOIAZ-1 1-0IDM 29"-RC-4-2501R R-A RI.I I IA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-002 (SR-001) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE: | |||
Perform UT examination. | |||
11448-WMKS-OIOIAZ-1 l-05DM 29"-RC-4-2501R 2 R-A RI.I I lA y UT Relief Request Re,*lslon Comments STEAM GENERATOR- NOZZLE TO SAFE END BUTT WELD. Added with Segment RC-005 Rev. I to the RBIS I plan: RBIS! NOTE: Perform UT examination. | |||
11448-WMKS-O\OIAZ-1 l-06DM 3 l "-RC-5-2501R 2 R-A Rl.11 IA y UT Relief Request Re,*lslon Comments STEAM GENERATOR - NOZZLE TO SAFE END BUTT WELD. Added with Segment RC-008 Rev. I to the RBIS! plan: RBIS! NOTE: Perform UT examination. | |||
11448-WMKS-OIOIAZ-1 1-17DM 27'!,"-RC-6-250 IR 3 R-A Rl.11 lA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-014 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE: | |||
Perform UT examination. | |||
11448-WMKS-0102AIZ 1-01 l Y,"-CH-93-1502 2 R-A Rl.12 IA y PT/Vf-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New with Rev. 9 to plan: This weld is added to the Segment CH-010 plan to ensure weld 1-01 is examined if the RCP main flange is disassembled. Weld 1-01 is inaccessible unless the RCP main flange is disassembled. See relief request SR-014. RBIS! NOTE: Perform PT & VT-2 examination. New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel) . | |||
. l 1448-WMKS-0102AIZ 1-03 l 1/,"-CH-93-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT & VT-2 examination. Segment CH-010 New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
RIIISI Plan Sorted by Drawing and Mark No., SPSU13 Database Page 7of 18 Print Dare: 7129/98 | |||
** | |||
-_D--i.:--w--i~-g--N-,~--:~"----------=--------=---*=--=-=--=l\=l=a=rk=N=o=.========L=ln=e=N=u=m-=-b=-e=r-=-==-=-=_=-_=-=_----=~=-:==-=-=--=P=en=*o=d==c=a=t=e=go=ry===I=t=em=N=:=o=.====:=IS=1=CI:::=as=s====~C:=r=ed::i::=t=====:=M~e~th~o=d~--=-==---=--=--=--=--=- | |||
-__-_-_~=--=~-----=:- | |||
11448-WMKS-0102AIZ | |||
__-__ ~====----=~~--~--=--=-====~~~======~-==================================================== | |||
1-04 I W'-CH-93-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New with Rev. 9 to plan: This weld is added to the Segment CH-010 plan to replace weld 1-0 I on the same drawing and line number. This weld is an additional weld and is scheduled for examination to ensure that 25% of examination category B-J welds are examined in the event that weld 1-0 I is not examined. Weld I-OI is inaccessible unless the RCP main flange is disassembled. See reliefrequest SR-O14. RBIS! NOTE: Perform PT & VT-2 examination. New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
I 1448-WMKS-0102AIZ 1-07 I Yi"-CH-93-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT & VT-2 examination. Segment CH-010 New with Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
l 1448-WMKS-0102AIZ 1-14 2"-CH-93-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment CH-013 Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
11448-Wll.lKS-0102A2Z 1-09 2"-RC-58-1502 2 R-A Rl.12 IA y PT/VT2 Relief Request Revision Comments SOCKET WELD, (WEPSOK), Terminal End. RBIS! NOTE: Perform PT Segment RC-029 examination. New with Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). Changed Item No. from RI.I I to Rl.12. | |||
11448-WMKS-0102A3Z 1-02 2"-RC-200-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBISI NOTE: Perform PT/VT-2 examination. Segment RC-039 New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
I 1448-WMKS-0102A3Z 1-07 2"-RC-200-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment RC-039 Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). | |||
11448-WMKS-0102AZ-1 1-0IDM 29"-RC-7-250 IR R-A RI.II IA y ITT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BITTT WELD. Per Relief Request Segment RC-003 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBISI NOTE: | |||
Perform ITT examination. | |||
11448-WMKS-0102AZ-l 1-17DM 27Yi"-RC-9-250 IR 3 R-A RI.I I IA y ITT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL - NOZZLE TO SAFE END BITTT WELD. Per Relief Request Segment RC-015 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE: | |||
Perform ur examination. | |||
- - - -------------~--~- | |||
RBrSI Pian Sorted by Drawing and Mark No., SPSU13 Database Page 8of 18 Print Date: 7/29/98 | |||
** Period Category Item No. ISi Class Credit | |||
* Method Dra"ing No. !\lark No. Line Number 11448-Wl\lKS-0103A2-l 1-02 6"-SHP-45-601 3 R-A Rl.18 2A y UT/MT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/MT Segment MS-010 examination. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment in FAC program, and UT/MT (RI.I I) is secondary damage mechanism. | |||
11448-WMKS-0117Al-l 1-06 14"-RH-1-1502 2 R-A Rl.16 IA y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT Segment RH-002 examination. | |||
11448-WMKS-0117A2 1-45 10"-RH-7-602 3 R-A Rl.16 2F y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform lIT Segment RH-003 examination. | |||
11448-WMKS-0118Al 0-13 6"-W APD-2-601 2 R-A Rl.18 2A y UT/MT Relief Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD (WEPCB) 3/8 in. & > nominal wall Segment AFW-015 thickness. RBIS! NOTE: Perform lIT/PT or lIT/MT examination. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (Rl.11) is secondary damage mechanism. | |||
11448-WMKS-0118A2-l 1-MOV-FW-151F 3"-WAPD-10-601 R-A Rl.18 2B y lIT/MT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! Note: Peiform lIT/PT or Segment AFW-016 lIT/MT on the weld at valve l-MOV-FW-151F. The weld is on the same side of the valve as support l-WAPD-H021A New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (RI.I I) is secondary damage mechanism. | |||
11448-WMKS-0118A2-l l-MOV-FW-151F 3"-W APD-10-601 R-A Rl.18 2B y lIT/MT Relief Request Revision Comments CIRCUl\ffERENTIAL PIPING WELD, (WEPCB). RBIS! Note: Peiform lIT/PT or Segment AFW-017 UT/MT on the weld at valve l-MOV-FW-151F. The weld is on the same side of the valve as support l-WAPD-H022. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (Rl.11) is secondary damage mechanism. | |||
11448-WMKS-0118A2-2 l-FW-58 3"-W APD-11-601 R-A y Rl.18 2B UT/PT Relief Request Revision Comments RBIS! Note: Peiform Uf/PT or lIT/MT on the weld at valve l-FW-58. The weld is Segment AFW-018 onthesamesideofthevalveassupport l-WAPD-H006. New withRev. l to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (RI. I ! ) is secondary damage mechanism. | |||
I 1448-WMKS-O l l 8A2-2 l-FW-MOV-15IB 3"-W APD-14-601 R-A y Rl.18 2B lIT/PT Relief Request Revision Comments RBIS! Note: Peiform lIT/PT or lIT/MT on the weld at valve l-FW-MOV-151B. Segment AFW-019 The weld is on the same side of the valve as valve 1-FW-93. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (RI . I I) is secondary damage mechanism. | |||
RBISI Plan Sorted by Dra\\ing and Mark No., SPSU13 Database Page 9of 18 Print Date: l/29198 | |||
** | |||
---*------*-----*------------- | |||
-------------- - * - - - - - - - - - - - - - - ===============================:::==::====~=;==== | |||
Period Category Item No. ISi Gass Credit Method | |||
* Drawlne No. !\lark No. Line Number | |||
---- | |||
l-FW-142 6"-WAPD-3-601 R-A Rl.13 3E y UT Thickness 11448-W~IKS-0118Gl-1 Relief Request Revision 0 Comments RBIS! Note: Perform UT thickness examination at low-point, I" square area on line Segment AFW-004 number 6"-W APD-3-601 prior to check valve I-FW-142. | |||
11448-W~IKS-OI 18GI-I I-FW-157 4"-WAPD-5-601 2 R-A Rl.13 3E y UT Thickness Relief Request Revision 0 Comments RBIS! Note: Perform UT thickness examination at low-point, I" square area on line Segment AFW-005 number 4"-W APD-5-601 prior to check valve I-FW-157. | |||
I 1448-W~IKS-01 I 8GI-I I-FW-172 4"-W APD-7-601 3 R-A Rl.13 3E y UT Thickness Relief Request Revision 0 Comments RBIS! Note: Perform UT thickness examination at low-point, I" square area on line Segment AFW-006 number 4"-WAPD-7-601 prior to check valve 1-FW-172. | |||
I 1448-WMKS-0122AI 1001 6"-RH-20-152 3 R-A Rl.16 2F UT Relief Request Revision Comments RBISI NOTE: Perform UT examination on a I" square area on line 6:-RH-20-152 Segment RH-Oil adjacent to integral attachment weld H0\4-1. New with Rev. I to the RBIS! plan: | |||
Changed method from PT to UT. | |||
11448-WMKS-0122AI 2-09 6"-RH-14-602 R-A Rl.16 2A y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD (WEPCB). 3/8 in. & > nominal wall Segment RH-003B thickness. RBIS! NOTE: Perform UT examination. | |||
------ | |||
I 1448-WMKS-0122AI 3-AF 6"-RH-20-152 3 R-A Rl.16 2F y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD (WEPCB). RBISI NOTE: Perform UT Segment RH-011 examination. | |||
*-------------------- | |||
I 1448-WMKS-0122HI 1-02 6"-RC-16-1502 3 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBISI NOTE: Perform UT/PT Segment RC-016 examination. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel). | |||
I 1448-WMKS-0122HI 1-08 6"-RC-16-1502 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-016 to plan with Rev. I and replaces weld 1-05 on line 6"-RC-16-1502, 11448-WMKS-0122HI. RBIS! NOTE: Perform UT/PT examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel). | |||
I 1448-WMKS-0122HI 1-09 6"-RC-16-1502 2 R-A RI.I I IA y UT/PT Relief Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-005 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel). | |||
I 1448-WMKS-0!22HI 1-10 6"-RC-16-1502 2 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-005 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel). | |||
-- --- ----- ----------------------------------- | |||
'RBIS! Plan Sorted hy Drawlne and Mark No., SPSU13 Database Page JO of /8 Prinr Date: 7129198 | |||
** !\lark No. Line Nmnber | |||
* Period Category Item No. ISi Oass Credit Method | |||
* Dra\\ing No. | |||
I 1448-\\'1',IKS-O l 22J I 1-05 6"-RC-21-1502 3 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD 4 in. NPS & >, (WEPCB). RBIS! NOTE: Segment RC-018 Perform UT/PT examination .. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel). | |||
11448-WI\IKS-0122Jl 1-08 6"-RC-21-1502 2 R-A Rl.l l IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-018 with Rev. l to plan and replaces weld 2-03 on 6"-RC-18-1502, I 1448-WMKS-0122KI. RBIS! NOTE: Perform UT/PT examination.. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel). | |||
11448-WI\IKS-0122Jl 1-09 6"-RC-21-1502 2 R-A Rl.l l IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-007 examination. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel). | |||
11448-WMKS-0122JI 1-10 6"-RC-21-1502 2 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-007 examination.. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel). | |||
11448-WMKS-0122Kl 2-03 6"-RC-18-1502 3 R-A Rl.11 IA .Y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). This weld removed with Rev. Segment RC-017 to plan and replaced with weld 1-08 on line 6"-RC-21-1502, I 1448-WMKS-0122Jl. | |||
RBIS! NOTE: Perform UT/PT examination.. New with Rev. I to the RBISI plan: | |||
Added (PT augmented by subpanel). | |||
11448-WI\IKS-0122Kl 2-08 6"-RC-18-1502 3 R-A Rl.11 IA y lrT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-017 with Rev. I to plan and replaces weld 2-07 on line 6"-RC-18-1502, l 1448-WMKS-0122KI. RBIS! NOTE: Perform UT/PT examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel). | |||
11448-WMKS-0122KI 2-09 6"-Sl-48-1502 2 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-006 examination.. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel). | |||
----------------- | |||
11448-WMKS-0122KI 2-10 6"-Sl-48-1502 2 R-A Rl.ll IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT . Segment ECC-006 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanei). | |||
l 1448-WMKS-0123Ql 0-05 12"-CS-2-153 2 R-A Rl.l l 2A y UT/PT Relief Request Revision Comments Circumferential Piping Weld, (WEPCB) 3/8 in. & > nominal wall thickness. RBIS! Segment CS-001 NOTE: Perform UT/PT examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel). | |||
- ---- . - ---*---*-----------------~------------------------------- | |||
RBIS! Plan Sorted by Drawing and Mark No., SPSUI3 Database Page 11 of 18 Print Date: 7129198 | |||
-- | |||
Drawing No. | |||
--------------------- | |||
I 1448-WMKS-0124AI-I | |||
!\lark No. | |||
18 Line Number 3"-RC-61-1502 Period 3 | |||
Category R-A Item No. | |||
RI.I I ISi Class IA Credit y UT(!) | |||
* Method Relief Request Re,*lslon Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perl"orm UT examination. . New Segment RC-059 with Rev. I to the RBIS! plan: Changed PT examination to UT examination. | |||
11448-WI\IKS-0124Al-1 19 3"-RC-35-1502 3 R-A RI.I I IA y UT()) | |||
Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform UT examination.. New with Segment RC-058 Rev. I to the RBIS! plan: changed PT examination to UT examination. | |||
11448-WI\IKS-0124Al-1 2-0IDM 6"-RC-38-1502 2 R-A RI.I I IA y UT Relief Request Revision Comments PRESSURIZER - NOZZLE TO SAFE END BUTT WELD. Examine 100%. Added Segment RC-053 with Rev. I to the RBIS! plan: RBIS! NOTE: Perl"orm UT examination. | |||
11448-WI\IKS-0125Al-2 3-07 I '/,"-RC-105-1502 3 R-A Rl.11 lA y UT(!) | |||
Relief Request Revision Comments SOCKET WELD, (WEPSOK), Terminal End. RBISI NOTE: Perform UT Segment RC-060A examination .. New with Rev. I to the RBIS! plan: Changed PT examination to UT examination. | |||
------ - - - - - - - - - - - - | |||
* I 1448-WMKS-0127Cl 3-BF I O"-Sl-84-152 3 R-A Rl.16 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB) RBIS! NOTE: Perform UT/PT Segment LHI-008 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel), and changed Item No. from Rl.11 to Rl.16. | |||
11448-WMKS-0127Cl 3-JF IO"-Sl-150-153 3 R-A Rl.11 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBISI NOTE: Perl"orm UT/PT Segment LHI-009 examination.. New with Rev. 1 to the RBISI plan: Added (PT augmented by subpanel). | |||
l 1448-WMKS-0127E2 1-V 8"-SI-14-153 3 R-A Rl.11 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB) RBIS! NOTE: Perform UT/PT Segment LHI-007 examination .. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel). | |||
------------- | |||
11448-WMKS-0127Gl-1 1-ADF 6"-SI-18-152 3 R-A y Rl.12 2F VT-2 Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perl"orm VT-2 Segment LHI-018 examination. . New with Rev. I to the RBIS I plan: Changed Item No. from R 1.11 to Rl.12 and added note: VT-2 each refueling outage. | |||
11448-WMKS-0127Gl-l 1-AKF 6"-SI-19-152 3 y R-A Rl.12 2F VT-2 Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform VT-2 Segment LHI-018 examination. New with Rev. I to the RBIS I plan: Changed Item No. from R 1.11 to Rl.12 and added note: VT-2 each refueling outage. | |||
11448-WMKS-0127Gl-1 1-AQF 6"-SI-78-152 3 R-A Rl.12 2F y lff/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment LHI-018 examination. New with Rev. I to the RBIS! plan: Changed Item No. from R 1.11 to Rl.12 and added note: VT-2 each refueling outage. Also add: (UT/PT augmented by subpanel). | |||
---- - - ~----- ------- ---- --------- - - - - - - - - - - - - ------- | |||
RBIS! Plan Sorted by Drawing and !\lark No., SPSU13 Database Page l2of 18 Print Date: 7/29/98 | |||
---------- | |||
Dra\\ing No. | |||
*- | |||
- - - - - -------- ----- | |||
!\lark No. Line Number Period Category Item No. ISi Oass Credit y VT-2 | |||
* Method I 1448-W~IKS-0127Gl-l 1-AUF 6"-Sl-78-152 3 R-A Rl.12 2F Rdkf Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform VT-2 Segment LHl-018 examination. New with Rev. I to the RBIS! plan: Changed Item No. from RI.I I to RI. 12 and added note: VT-2 each refueling outage. | |||
l 1448-WMKS-0127G2 1-APF 1O"-Sl-6-153 2 R-A RI.I I 2F y UT/PT Relief Request Revision Comments Circumferential Piping Weld. RBIS! NOTE: Perform UT/PT examination. New Segment HHl-001 with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
I 1448-WMKS-0127G2 1-AYF 8"-Sl-7-152 2 R-A RI.I I 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD. RBIS! NOTE: Perform UT/PT Segment HHl-002 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
l 1448-WMKS-0127G2 1-BNF 8"-CH-206-152 2 R-A RI.I I 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment HHl-003 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-012711 1-02 6"-RC-17-1502 3 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment RC-041 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
l 1448-WMKS-0127Jl , .. 04 6"-RC-17-1502 R-A RI.II IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD 4 in. NPS & >, (WEPCB). RBIS! NOTE: Segment RC-041 Perfonn UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
I 1448-WMKS-0127JI 1-05 6"-RC-17-1502 2 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-001 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
I 1448-WMKS-0127JI 1-09 2"-Sl-74-1502 2 R-A RI.I I IA y UT(!) | |||
Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform UT examination. New with Segment ECC-001 Rev. I to the RBIS! plan: Changed PT examination to UT examination. | |||
11448-WMKS-012712 1-02 6"-RC-19-1502 3 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 4 NPS in. & >. RBIS! NOTE: Segment RC-042 Perform UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
**-------- | |||
IUIISI Plan Sorted by Drawing and l\lark No., SPSU13 Database Page 13 of 18 Print Date: 7129198 | |||
Dra"ing No. | |||
* !\lark No. | |||
1-04 Line Nwnber 6"-RC-19-1502 Period 3 | |||
Category R-A Item No. | |||
RI.I I ISi Oass IA Credit y | |||
Method ITT/PT | |||
* 11448-WMKS-012712 Relief Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. Weld added with Segment RC-042 Rev. I to plan, and replaces weld 1-03 on line 8"-RC-l l-2501R. RBIS! NOTE: | |||
Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WI\IKS-012712 1-05 6"-RC-19-1502 2 R-A RI.II IA y ITT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 4 NPS in. & >. RBIS! NOTE: Segment ECC-002 Perform UT/PT examination. New with Rev. I to the RBIS I plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-012712 1-06 6"-RC-19-1502 2 R-A RI.II IA y ITT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 4 NPS in. & >. RBIS! NOTE: Segment ECC-002 Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
l 1448-WMKS-012713 1-02 6"-RC-20-1502 3 R-A RI.II IA y ITT/PT Reller Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). NPS 4 in. & >. RBIS! NOTE: Segment RC-043 Perform ITT/PT examination. New with Rev. l to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-O 127J3 1-03 6"-RC-20-1502 2 R-A RI.I I IA y ITT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-043 to plan with Rev. I and replaces weld 1-04 on line 6"-RC-20-1502, 11448-WMKS-012713. RBIS! NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WI\IKS-012713 1-04 6"-RC-20-1502 2 R-A Rl.11 IA y lIT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). This weld removed with Rev. Segment ECC-003 to plan, and was replaced with weld 1-03 on line 6"-RC-20-1502, 11448-WMKS-012713. RBIS! NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-012713 1-10 2"-Sl-75-1502 2 R-A Rl.11 IA y ITT (I) | |||
Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform ITT examination. New with Segment ECC-003 Rev. I to the RBIS! plan: Changed PT examination to ITT examination. | |||
I 1448-WMKS-012713 | |||
*--------------------------- | |||
2-01 6"-SI-153-1502 3 R-A RI.I I 2A y ITT/PT Reller Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 3/8 in> & > Nominal Wall Segment LHI-010 Thickness. RBIS! NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
l 1448-WMKS-1022AIO 1001 2'1,"-CC-205-151 R-A Rl.12 38 y ITT/MT/Vf-2 Reller Request Revision Comments RBIS! Note: Perform ITT/PT or ITT/MT examination on weld nearest to reactor Segment CC-033 shroud cooling cools on line 2Y2"-CC-205-15 l. Note there is no mark/weld number I 00 I, this is used to sort the ISi database only. New with Rev. I to the RBIS) plan: | |||
added note: (ITT/MT augmented by subpanel), changed Item No. from RI. I I to Rl.12, and added note to perform Vf-2 examination each refueling outage. | |||
- - - - - - - - - - * - - - - - - - - - - - - - - - - - - - - - * * - - * - * * ----*-**--*----------- .. *- | |||
RRISI Plan Sorted by Drawing and Mark No., SPSU13 Database Page 14 of 18 Print Date: 7129198 | |||
** | |||
Dra"ing No. !\lark No. Line Number Period Category Item No. ISi Class Credit | |||
* Method | |||
----- - - - - - - - | |||
l 1448-WMKS-1022A2 1001 3"-CC-98-151 R-A Rl.12 38 y ITT/MT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform ITT/PT or ITT/MT on the !st weld from pump 1-RC-P-IA on Segment CC-025 line 3"-CC-98-151. Note there is no mark/weld number 100 I, this is used to sort the | |||
!SI database only. New with Rev. I to the RBIS! plan: added note: (UT/MT augmented by subpanel), changed Item No. from RI.I! to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
11448-WMKS-1022A2 1002 I \/2"-CC-97-151 R-A Rl.12 3B y PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on the !st weld from pump 1-RC-P-1 A on line Segment CC-025 l 'h"-CC-97-151. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. l to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
I 1448-WMKS-1022A.5 1001 1"-CC-95-151 R-A Rl.12 38 y PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on the !st weld from pump 1-RC-P-IB on line Segment CC-030 1"-CC-95-15 l. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
11448-WMKS-1022A7 1001 3"-CC-91-151 R-A Rl.12 3B y ITT/MT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform ITT/PT or ITT/MT on the weld on 3" side of3"x2W' reducer on Segment CC-030 line 3"-CC-91-151. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (UT/MT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
11448-WMKS- I 022A9 1001 l"-CC-84-151 R-A Rl.12 3B y PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on weld at tee from line l "-CC-84-15 I to Segment CC-033 branch line goint to valve l-CC-RV-115C .. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from RI.I I to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
11448-WMKS-1022A9 1002 I "-CC-84-151 R-A Rl.12 y 3B PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on weld at tee on line l "-CC-84-151 to branch Segment CC-033 line goint to valve 1-CC-RV-115C. The weld to examine will be on the valve (l-CC- | |||
: 76) side of the tee. Note there is no mark/weld number I 002, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
RBIS! Plan Sorted by Drnuing and Mark No., SPSUlJ Database Page 15 of 18 Print Date: 7/29/98 | |||
** Period Category Item No. ISi Oass Credit Method | |||
* Dra"ing No. !\lark No. Line Nwnber 1"-CC-84-151 R-A Rl.12 38 y PT/VT-2 I 1448-\V~IKS-1022A9 1003 Relief Request Revision Conunents RBIS! Note: Perform PT examination on weld at tee on line I "-CC-84-151 to branch Segment CC-033 line goint to valve I-CC-RV-I 15C. The weld to examine will be on the pump (l-RC-P-1 C) side of the tee. Note there is no mark/weld number I 003, this is used to sort the ISi database only. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl. I I to Rl. 12, and added note to perform VT-2 examination each refueling outage. | |||
11448-WMKS-I IOIA3 0-03 12"-CS-1-153 2 R-A RI.I I 2A y lIT/PT Relief Request Revision Conunents Circumferential Piping Weld, (WEPCB) 3/8 in. & > nominal wall thickness. RBIS! Segment CS-002 NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-I IOIA5 1-03 12"-RS-8-153 R-A Rl.16 2A y lIT Relief Request Revision 0 Conunents CIRCUMFERENTIAL PIPING WELD, (WEPCB). 3/8 in. & > Nominal Wall Segment RS-003A Thickness. RBIS! NOTE: Perform lIT examination. | |||
11448-WMKS-I IOI A5 1-06 12"-RS-7-153 3 R-A Rl.16 2A y lIT Relief Request Revision 0 Conunents CIRCUMFERENTIAL PIPING WELD, (WEPCB). 3/8 in. & > Nominal Wall Segment RS-004A Thickness. RBIS! NOTE: Perform ITT examination. | |||
11448-WMKS-110585 1-06 3"-CH-69-1503 2 R-A RI.II 2A y lIT/PT Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHl-004C NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-l 105BS 2-AM-A 3"-CH-2-1503 2 R-A Rl.1 I 2A y Uf/PT Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHI-005C NOTE: Perform ITT/PT examination. New with Rev. 1 to the RBISI plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-110585 2-AP 3"-CH-2-1503 2 R-A Rl.12 2A y lIT/PT/VT-2 Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBISI Segment HHl-005A NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (ITT/MT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
11448-WMKS-l 10585 2-AS 3"-CH-3-1503 2 R-A Rl.1 I 2A y Uf/PT Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. This Segment HHI-006C weld added to plan with Rev. 2 to plan to replace weld 2-AW, which was preserviced during the 1994 refueling outage. RBISI NOTE: Perform UT/PT examination. | |||
New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-110585 2-AZ 3"-CH-3-1503 2 R-A Rl.12 2A y lIT/PT/VT-2 Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHl-006A NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (lIT/MT augmented by subpanel), changed Item No. from RI.I I to Rl.12, and added note to perform VT-2 examination each refueling outage. | |||
--------*----- --------------------------- ------------------------- | |||
RBIS( Plan Sorted by Drawing and Mark No., SPSU13 Database Page 16 of 18 Print Date: 7129/98 | |||
** | |||
*=-=:.-=:=-_--- *:c Dra\\ing No. | |||
=-====================:==:========::===::;'======;;:~==~~==~~== | |||
Mark No. Line Number Period Category Item No. ISi Oass Credit Method | |||
* 2-N 3"-CH-2-1503 3 R-A R!.11 2A y UT/PT 11448-WI\IKS-1105B5 Rellef Request Revision Comments Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHI-008 NOTE: Perform UT/PT examination. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-1105B9 1;BcF 4"-CH-89-1503 3 R-A Rl.11 2A y UT/PT Reller Request Revision Comments Circumferential Piping Weld (WEPCB). > 0.200 in. nominal wall thickness. RBIS! Segment HHl-009 NOTE: Perform UT/PT examination. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-1106A4 1-14 3"-Sl-70-1503 3 R-A Rl.16 2A y UT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. Nominal Wall Thickness. Segment HHl-012A RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan: | |||
added note: (PT augmented by subpanel), and changed Item No. from RI.I I to Rl.16. | |||
11448-WMKS-1106A4 3-47 2"-SI-71-1503 3 R-A Rl.16 2A y UT(!) | |||
Reller Request Revision Comments Socket Weld, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Rev. Segment HHI-012A I to the RBIS! plan: PT examination to UT examination, and changed Item No. from Rl.11 to RI 16. | |||
------- | |||
11448-WMKS-1106A4 5-AF 3"-Sl-70-1503 3 R-A Rl.11 2A y UT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. Nominal Wall Thickness. Segment HHI-011 RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan: | |||
added note: (PT augmented by subpanel). | |||
11448-WMKS-1106A7 1-13 12"-Sl-1-153 3 R-A Rl.11 2A y UT/PT Reller Request Revision Comments CIRCUJ\,IFERENTIAL PIPING WELD, (WEPCB) 3/8 in. & > nominal wall Segment LHI-004 thickness. RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-1106A7 1-15 12"-Sl-2-153 3 R-A Rl.I I 2A y UT/PT Reller Request Revision Comments CIRCUl\ffERENTIAL PIPING WELD, (WEPCB) 3/8 in. & > nominal wall Segment LHI-003 thickness. RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-1106A7 2-18 12"-Sl-5-153 2 R-A Rl.16 2A y UT/PT Rellef Request Revision Comments Circumferential Piping Weld, (WEPCB) 3/8 in. & > nominal wall thickness. RBIS! Segment ECC-000 NOTE: Perform UT/PT examination. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel), and changed Item No. from RI. I I to Rl.16. | |||
11448-WMKS-1106A7 4-02 10"-Sl-105-153 2 R-A Rl.16 2F y UT/PT Reller Request Revision Comments CIRCUJ\,IFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment LHI-002 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
*-* -------- ------------------------- -- - - - - - --- -- - - - - - - - - - - - - - - - - - - - - - * - - - - - - - - - - - - - - - - - - - * ----------*** | |||
RBIS( Plan Sorted by Dra\\in~ and Mark No., SPSU13 Database Page /7of /8 Print Date: 7129198 | |||
-. * | |||
* Drafting No. Mark No. Line Number Period Category Item No. ISi Oass Credit Method I 1448-W!'.1KS-I I06A7 6-04 IO"-SI-106-153 2 R-A Rl.16 2F y lIT/PT Reller Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB) RBIS! NOTE: Perform lIT/PT Segment LHI-001 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-1106BI 0-25 3"-Sl-146-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in nominal wall thickness. RBIS! Segment HHl-013 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-1106B2 0-18 3"-SI-147-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential piping Weld, (WEPCB). > 0.200 in. nominal wall thickness. RBIS! Segment HHI-015 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
11448-WMKS-l 106B5 0-16 3"-SI-72-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. nominal wall thickness. RBIS! Segment HHI-017 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
I l448-WMKS-I I06B6 0-24 3"-SI-70-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. nominal wall thickness. RBISI Segment HHl-010 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
------ | |||
UFSAR-FIG-14B-16 IOOI 4"-SLPD-50-153 R-A Rl.11 NC y lIT/PT Reller Request Revision Comments RBIS! Note: Perform lIT/PT on the weld nearest to the charging power cable tray on Segment AS-I line 4"-SLPD-50-153, as shown on UFSAR Figure 14B-16. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel). | |||
UFSAR-FIG-14B-16 1002 6"-SA-21 R-A Rl.11 NC y lIT/MT Reller Request Re,*lslon Comments RBIS! Note: Perform lIT/PT or lIT/MT on the weld nearest to the component Segment AS-2 cooling water pumps on line 6"-SA-21 (carbon steel), as shown on UFSAR Figure 14B-16. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (MT augmented by subpanel). | |||
Record Count: 147 RBIS! Plan Sorted by Drafting and Mark No., SPSU13 Database Page 18of 18 Print Date: 7129/98 | |||
ENCLOSURE 3 DIFFERENCES BETWEEN THE ASME SECTION XI AND THE RISK-BASED INSERVICE INSPECTION PLANS SURRY POWER STATION UNIT 1 | |||
* | * | ||
* | |||
- | |||
Se~ment | |||
* | - | ||
*-*----------- | |||
------- | |||
XI Item No. Mark No. Line Nwnber | |||
* XI Period XI Method RB Item No. RB Period | |||
! | * RB Method ACC-001 89.11 1-16 l 2"-Sl-45-1502 2 ITT/PT 0 ACC..()01 89.11 1-14 12"-Sl-45-1502 ITT/PT 0 ACC-001 89.11 1-13 12"-Sl-45-1502 ITT/PT 0 ACC-006 B9.ll 1-13 12"-Sl-46-1502 UT/PT 0 | ||
- | |||
ACC-006 B9.ll 1-14 l 2"-Sl-46-1502 UT/PT 0 | |||
---------------------* | |||
ACC-006 B9.ll 1-19 12"-SI-46-1502 3 UT/PT 0 | |||
------ | |||
ACC-011 B9.ll 1-08 12"-Sl-47-1502 UT/PT 0 | |||
*---------- *--- | |||
ACC-011 B9.ll 1-12 l2"-Sl-47-1502 2 UT/PT 0 ACC-011 89.11 1-09 l 2"-SI-47-1502 UT/PT 0 AFW-004 NA 1-FW-142 6"-W APD-3-601 0 Rl.13 UT Thickness AFW-005 NA 1-FW-157 4"-W APD-5-601 0 Rl.13 2 ITT Thickness AFW-006 NA l-FW-172 4"-WAPD-7-601 0 Rl.13 3 UT Thickness AFW-014 C5.51 0-35 6"-WAPD-1-601 ITT/MT 0 AFW..()15 C5.5I 0-13 6"-W APD-2-60 I 2 ITT/MT Rl.18 2 UT/MT | |||
* | -**-- - - - - - * - - **------- | ||
*** | AFW-016 CS.51 0-34 6"-WAPD-1-601 | ||
-------------------- | |||
UT/MT 0 | |||
------*--------*------- | |||
------------------------------------ | |||
RBISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page I of 40 Print Date: 7/29/98 | |||
* | |||
----- | |||
* | |||
' | |||
------- | |||
------- | |||
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method | |||
- | |||
- ---- | |||
* *- | |||
---- | |||
AFW-016 C5.51 0-27 6"-WAPD-51-601 2 lIT/MT 0 AFW-016 NA l-MOV-FW-!51F 3"-WAPD-10-601 0 Rl.18 UT/MT | |||
--------- | |||
AFW-017 NA l-MOV-FW-!51F 3"-WAPD-10-601 0 Rl.18 UT/MT AFW-018 NA l-FW-58 3"-W APD-11-601 0 Rl.18 UT/PT AFW-019 NA l-FW-MOV-1518 3"-WAPD-14-601 0 Rl.18 UT/PT | |||
---------------------------- | |||
AFW-028 C5.51 0-13 6"-WAPD-50-601 3 UT/MT 0 | |||
------ | |||
AFW-028 C5.51 0-14 6"-W APD-50-60 I 3 UT/MT 0 | |||
--------------- | |||
AFW-30 NA AFW Lube Oil Cool Piping For P-2 0 Rl.13 UT-Thickness AFW-31 NA AFW Lube Oil Cool Piping For P-3 A 0 Rl.13 2 UT-Thickness AFW-32 NA AFW Lube Oil Cool Piping For P-3B 0 Rl.13 3 UT-Thickness AS-I NA 1001 4"-SLPD-50-153 0 Rl.11 UT/PT | |||
---------- | |||
AS-2 NA 1002 6"-SA-21 0 Rl.11 UT/MT BD-002B NA 1001 3"-WGCB-1-601 0 Rl.18 UT/MT BD-003 NA 1002 3"-WGCB-105-601 0 Rl.18 UT/MT | |||
----- | |||
BD-005B NA 1001 3"-WGCB-2-601 0 Rl.18 UT/MT | |||
---------*------ | |||
------------------- | |||
RlllSI Plan and AS1\IE XI Sorted by RBISI Segments, SPSU13 Database Page 2of 40 Print Date: 7/29198 | |||
* * * | |||
' | |||
- | |||
----- | |||
----- -- | |||
- | |||
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method | |||
------ | |||
------ | |||
BD-006 NA 1002 3"-WGCB-106-601 0 Rl.18 UT/MT BD-008B NA 1001 3"-WGCB-3-601 0 Rl.18 UT/MT BD-009 NA 1002 3"-WGCB-107-601 0 Rl.18 UT CC-025 NA 1002 lVi"-CC-97-151 0 Rl.12 PTNT-2 CC-025 NA 1001 3"-CC-98-151 0 Rl.12 UT/MTNT-2 CC-030 NA 1001 3"-CC-91-151 0 Rl.12 UT/MTNT-2 CC-030 NA 1001 1"-CC-95-151 0 Rl.12 PTNT-2 | |||
----------- | ----------- | ||
CC-033 NA 1001 2W'-CC-205-151 0 Rl.12 UT/MTNT-2 CC-033 NA 1001 l"-CC-84-151 0 Rl.12 PTNT-2 CC-033 NA 1002 1"-CC-84-151 0 Rl.12 PTNT-2 CC-033 NA 1003 1"-CC-84-151 0 Rl.12 PTNT-2 CC-28A NA 1001 2'/z"-CC-88-151 0 Rl.12 VT-2/lIT/MT CC-28A NA 1002 1Vi"-CC-803-1501 0 Rl.12 VT-2/PT CC-28B NA 1001 3"-CC-820-1501 0 Rl.11 UT/MT CC-29 NA 1001 3"-CC-820-1501 0 Rl.11 UT/MT | |||
---------* | |||
RBIS! Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 3 of 40 Print Date: 7129/98 | |||
- -------- - | |||
Sei:ment | |||
------ - - - - - - - - | |||
------ | |||
XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period | |||
* RB Method Cll-005 NA 1001 3"-CH-99-152 0 RI.I I lJf (I) | |||
Cll-008 89.40 1-02 (PSI) I Yi"-CH-97-1502 2 PT 0 Cll-008 89.40 | |||
-------------- | -------------- | ||
- | RC-017 89.11 2-03 6"-RC-18-1502 0 lJf/PT Rl.11 3 UT/PT RC-018 89.11 1-08 6"-RC..21-1502 2 lJf/PT RI.II 2 lJf/PT RC-018 89.31 1-0IBC 6"-RC-21-1502 lJf/PT 0 RC-018 89.11 1-02 6"-RC-21-1502 lJf/PT 0 RC-018 89.11 1-05 6"-RC-21-1502 0 lJf/PT RI.I I 3 lJf/PT RC-019 89.11 1-07 12"-RC-I0-2501R 2 UT/PT 0 RC-019 89.11 1-02 12"-RC-I0-2501R lJf/PT 0 | ||
----------*-* | |||
RC-019 85.40 1-0IDM 12"-RC-10-2501R 3 lJf/PT | |||
------- | |||
0 | |||
------------- -- -----*------ | |||
- - - - - - - - - - - - - - - - - - -- - - - - - | |||
RIIISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 27 of 40 Print Date: 7129198 | |||
::.:-:=:*_----==-~==:::****-=*========== | |||
Segment | |||
==-===----::_-_-_-_-_-_ | |||
XI Item No. Mark No. Line Nwnber | |||
. | --=~~~~=========~~~~============================================~ | ||
2 | XI Period XI Method RB Item No. RB Period | ||
. | * RB Method RC-019 89.31 l-098C 12"-RC-I0-2501R 3 UT/PT 0 RC-020 89.31 1-0IBC 14"-RH-1-1502 UT/PT 0 RC-020 89.11 1-05 14"-RH-1-1502 UT/PT 0 RC-021 89.11 1-04 8"-RC-l l-2501R 3 UT/PT 0 RC-022 89.11 1-03 8"-RC-12-250 IR 3 UT/PT 0 RC-022 89.11 1-04 8"-RC-12-250 IR 3 UT/PT 0 RC-023 89.11 1-04 8"-RC-13-250IR 3 Uf/PT 0 | ||
2 | ----- | ||
. | RC-024 B9.40 1-14 2"-RC-45-1502 3 PT 0 RC-024 89.32 l-178C 2"-RC-45-1502 2 PT 0 RC-024 89.32 1-0IBC 2"-RC-45-1502 2 PT 0 RC-024 89.40 1-10 2"-RC-45-1502 3 PT 0 RC-024 89.40 1-06 2"-RC-45-1502 3 PT 0 RC-025 89.32 l-178C 2"-RC-46-1502 3 PT 0 RC-025 89.32 l-018C 2"-RC-46-1502 2 PT 0 RC-025 89.40 1-04 2"-RC-46-1502 3 PT | ||
-------- | |||
0 RBISJ Plan end ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 28of 40 Print Date: 7129198 | |||
**- --** . | |||
Segment | |||
2 | ----- | ||
* | |||
2 | --- ---- | ||
XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period | |||
2 | * RB Method RC-025 89.40 1-07 2"-RC-46-1502 3 PT 0 | ||
------ | |||
RC-025 89.40 1-12 2"-RC-46-1502 3 PT 0 RC-026 89.32 l-178C 2"-RC-44-1502 2 PT 0 RC-026 89.40 1-15 2"-RC-44-1502 3 PT 0 RC-026 89.40 1-11 2"-RC-44-1502 3 PT 0 RC-026 89.32 1-0IBC 2"-RC-44-1502 2 PT 0 | |||
----------- | |||
RC-027 89.40 1-03A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 l-07A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 l-04A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 1-05A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 1-07A 2"-RC-53-1502 PT Rl.12 VT-2/PT RC-027 89.32 1-0IBC 2"-RC-53-1502 PT 0 RC-027 89.40 l-06A(PSI) 2"-RC-53-1502 PT 0 RC-028 89.32 1-0IBC 2"-RC-57-1502 PT Rl.12 PT/VT-2 | |||
----- | |||
RC-029 89.40 1-03 2"-RC-58-1502 2 PT 0 | |||
------- --------- | |||
--------- | |||
RllISI Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 29of 40 Print Date: 7/29198 | |||
-- ----**** -* - -- -- --- - -------**** -*** | |||
Segment | |||
- --- | |||
----------- | |||
* | |||
- - - -----*--- | |||
- | - - - ---------- | ||
XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period | |||
* RB Method RC-029 89.32 1-0IBC 2"-RC-58-1502 PT 0 RC-029 89.40 1-06 2"-RC-58-1502 2 PT 0 RC-029 89.40 1-09 2"-RC-58-1502 2 PT Rl.12 2 PT/VT2 RC-030 89.40 1-37 2"-RC-56-1502 2 PT 0 RC-030 89.40 1-16 2"-RC-58-1502 2 PT 0 RC-030 89.40 1-39 2"-RC-59-1502 3 PT 0 RC-030 89.40 1-17 2"-RC-58-1502 2 PT 0 RC-030 89.40 1-45 2"-RC-53-1502 PT 0 RC-030 89.40 1-11 2"-RC-53-1502 PT 0 RC-030 89.40 l-08A (PSI) 2"-RC-53-1502 PT 0 RC-030 89.40 1-19 2"-RC-53-1502 PT 0 RC-030 89.40 1-12 2"-RC-57-1502 2 PT 0 RC-030 89.40 1-15 2"-RC-53-1502 | |||
----- | |||
PT 0 RC-030 89.40 1-23 2"-RC-53-1502 PT 0 RC-030 89.40 1-32 -----~----- | |||
2"-RC-55-1502 PT 0 | |||
2 | -------- | ||
- | ---*-*------- | ||
RIIISI Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 30of 40 Print Date: 7129198 | |||
** | |||
~-.::-_:_:.:.._.=-:::_-_-_-..:-::.=.::*.::_: -----------**-----*- ========== | |||
------- | * XI p ri d XI M th d RB It N RB Period | ||
.. | * RB l\fethod | ||
_Se:~~~~---..-:::.-:--..=.:*:~~-=-----x-:I_I_te_m No.=========l\~l~a~rk~N~o~-====~L~ln~e~N=um~b~er=======e=o====e=o=====e=m==o*================ | |||
. | RC-030 139 .40 1-16 2"-RC-53-1502 PT 0 | ||
. | ------* | ||
RC-030 139.40 1-26 2"-RC-53-1502 PT 0 RC-030 89.40 1-41 2"-RC-57-1502 2 PT 0 RC-030 89.40 1-49 2"-RC-53-1502 PT 0 RC-030 89.40 1-01 2"-RC-53-1502 PT 0 | |||
***-*-- | |||
RC-030 89.40 1-08 2"-RC-53-1502 PT 0 | |||
------------- | |||
RC-030 89.40 1-11 2"-RC-53-1502 PT 0 | |||
- | |||
------------ | ------------ | ||
RC-030 89.40 1-17 2"-RC-57-1502 2 PT 0 RC-031 89.32 1-18BC 2"-RC-55-1502 PT 0 RC-031 89.40 1-25 2"-RC-55-1502 PT 0 RC-031 89.40 1-22 2"-RC-55-1502 PT 0 RC-032 89.40 1-33 2"-RC-56-1502 2 PT 0 RC-032 89.32 1-22BC 2"-RC-56-1502 PT 0 RC-032 89.40 1-23 2"-RC-56-1502 2 PT 0 RC-032 *-------*------- | |||
89.40 1-25 2"-RC-56-1502 2 PT 0 | |||
***-----*----* *------- --------- | |||
------------------- | |||
RBISI Plan and ASl\lE XI Sorted by RBISI Segments, SPSU13 Database Page 31 of 40 Print Date: 7129198 | |||
. ***-*-------* *- *****-**- - | |||
* * * | |||
' | |||
-- | |||
---------- | ---------- | ||
- - ~ - - -- | |||
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method | |||
- -- | |||
- -- | |||
- ------------ | |||
- | RC-033 B9.40 1-22 2"-RC-59-1502 2 PT 0 RC-033 B9.40 1-25 2"-RC-59-1502 2 PT 0 RC-033 B9.40 1-30 2"-RC-59-1502 2 PT 0 RC-033 B9.32 l-18BC 2"-RC-59-1502 2 PT 0 RC-034 B9.21 1-02 3"-RC-131-1502 3 PT 0 RC-034 B9.32 1-0!BC 3"-RC-131-1502 3 PT 0 RC-035 B9.40 1-02 3"-RC-116-1502 3 PT 0 | ||
-------- | |||
RC-035 B9.32 1-0!BC 3"-RC-116-1502 3 PT 0 RC-036 B9.21 1-02 3"-RC-147-1502 3 PT 0 RC-036 B9.32 1-0!BC 3"-RC-147-1502 3 PT 0 RC-037 B9.40 1-03 2"-RC-198-1502 PT Rl.12 PT/Vf-2 RC-037 B9.40 1-02 2"-RC-198-1502 0 PT Rl.12 PT/VT-2 RC-037 B9.32 1-0!BC 2"-RC-198-1502 PT 0 RC-038 B9.32 1-0!BC 2"-RC-199-1502 PT 0 | |||
--------- | |||
RC-038 B9.21 1-02 2"-RC-199-1502 0 PT Rl.12 3 PT/VT-2 | |||
-* ----------- | |||
--------------- | |||
RIIISI Plan and ASME XI Sorted by RBISI Segments, SPSU13 Database Page 32of 40 Print Date: 7129198 | |||
----* | |||
------- | |||
Segment | |||
*--- | |||
XI Item No. Mark No. Line Nwnber | |||
* XI Period XI Method RB Item No. RB Period | |||
* | * RB Method RC-038 B9.21 1-05 2"-RC-199-1502 0 PT Rl.12 3 PT/Vf-2 RC-039 B9.40 1-07 2"-RC-200-1502 3 PT Rl.12 3 PT/Vf-2 RC-039 B9.40 1-04 2"-RC-200-1502 3 PT 0 RC-039 B9.40 1-02 2"-RC-200-1502 0 PT Rl.12 3 PT/Vf-2 | ||
2 | ------- | ||
RC-039 B9.32 1-0IBC 2"-RC-200-1502 2 PT 0 RC-040 B9.21 1-09 2"-CH-5-1502 PT 0 | |||
---------- ---- | |||
RC-040 B9.2! 1-03 2"-CH-5-1502 PT 0 RC-040 B9.32 1-0IBC 2"-CH-5-1502 PT 0 RC-040 B9.21 1-12 2"-CH-5-1502 PT 0 RC-040 B9.21 1-05 2"-CH-5-1502 PT 0 RC-041 B9.ll 1-02 6"-RC-17-1502 0 UT/PT RI.I I 3 UT/PT RC-041 B9.ll 1-04 6"-RC-17-1502 UT/PT RI.I I UT/PT RC-041 B9.31 1-0IBC 6"-RC-17-1502 3 Uf/PT 0 RC-042 B9.31 1-0IBC 6"-RC-19-1502 3 UT/PT 0 | |||
- | --------- | ||
RC-042 B9.ll 1-02 6"-RC-19-1502 0 UT/PT RI.I I 3 UT/PT | |||
. ------*----------- -------------------------~-- | |||
----- | RBIS! Pinn nnd ASJ\IE XI Sorted by RBIS! Segments, SPSU13 Dntnbnse Page 33 of 40 Print Date: 7129198 | ||
Segment | |||
------------------- | -- - -----*----------- | ||
-- | |||
XI Item No. | |||
-------*------------- | |||
---- | !\lark No. | ||
*--------* | |||
6 | Line Number XI Period XI Method | ||
================================ | |||
RB Item No. RB Period | |||
* RB Method RC-042 B9.ll 1-04 6"-RC-19-1502 Uf/PT RI.I I 3 Uf/PT RC-043 B9.31 1-0IBC 6"-RC-20-1502 3 Uf/PT 0 | |||
--*-------- | |||
RC-043 B9.II 1-02 6"-RC-20-1502 0 Uf/PT Rl.11 3 Uf/PT RC-043 B9.ll 1-03 6"-RC-20-1502 2 Uf/PT RI.I I 2 Uf/PT RC-044 B9.II 1-12 4"-RC-14-1502 3 Uf/PT 0 | |||
---------* --------- | |||
RC-044 B9.II 1-02 4"-RC-14-1502 2 Uf/PT 0 RC-044 B9.II 1-18 4"-RC-14-1502 3 Uf/PT 0 RC-044 B9.11 1-16 4"-RC-14-1502 Uf/PT 0 RC-044 B9.II 1-14 4"-RC-14-1502 2 Uf/PT 0 RC-044 B9.ll 1-13 4"-RC-14-1502 3 Uf/PT 0 RC-044 B9.II 1-11 4"-RC-14-1502 | |||
*----------- | |||
2 Uf/PT 0 RC-044 B9.ll 1-10 4"-RC-14-1502 Uf/PT 0 | |||
------*---------- | |||
RC-044 B9.II 1-03 4"-RC-14-1502 2 UT/PT 0 RC-044 B9.31 1-0IBC 4"-RC-14-1502 2 UT/PT 0 | |||
------------ ----------------- | |||
RC-044 B9.II 1-04 4"-RC-14-1502 2 lIT/PT 0 RBIS! Plan and ASl\lE XI Sorted by RBISI Segments, SPSUlJ Database Page 34 of 40 Print Date: 7/29/98 | |||
Segment | |||
** XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period | |||
* RB Method RC-045 B9.II 2-09 4"-RC-15-1502 2 UT/PT 0 | |||
------- | |||
RC-045 B9.II 2-17A 4"-RC-15-1502 UT/PT 0 RC-045 B9.ll 2-15 4"-RC-15-1502 2 UT/PT 0 RC-045 B9.ll 2-10 4"-RC-15-1502 2 UT/PT 0 RC-045 B9.31 2-0IBC 4"-RC-15-1502 3 UT/PT 0 | |||
-------~---- | |||
RC-045 B9.ll 2-02 4"-RC-15-1502 UT/PT 0 RC-045 B9.II 2-08 4"-RC-15-1502 2 UT/PT 0 RC-045 B9-11 2-07 4"-RC-15-1502 UT/PT 0 RC-045 B911 2-17A(PS1) 4"-RC-15-1502 2 UT/PT 0 RC-046 B9_JJ 1-09 l 2"-RC-22-1502 3 UT/PT 0 RC-046 B9.31 1-0IBC 12"-RC-22-1502 2 UT/PT 0 RC-046 B9.ll 1-05 l 2"-RC-22-1502 2 UT/PT 0 RC-047 B9.31 1-0IBC l 2"-RC-23-1502 UT/PT 0 RC-047 B9.II 1-09 12"-RC-23-1502 2 UT/PT 0 RC-048 B9-31 1-0IBC 12"-RC-24-1502 UT/PT 0 | |||
------*------------- | |||
RIIISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 35 of 40 Print Date: 7129/98 | |||
** | |||
-------------------------------------- | |||
- - -- - - - - * - - - - - - - - - - - | |||
Line Number XI Period XI Method RB Item No. RB Period | |||
* RB Method Segment XI Item No. !\lark No. | |||
====== | |||
RC-048 B9.II 1-03 12"-RC-24-1502 2 UT/PT 0 RC-048 B9.ll 1-04 12"-RC-24-1502 UT/PT 0 | |||
------ | |||
RC-049 B9.21 1-02 3"-CH-1-1502 3 PT 0 RC-049 B9.32 1-0IBC 3"-CH-1-1502 3 PT 0 RC-051 B5.40 2-25DM 4"-RC-15-1502 2 UT/PT 0 | |||
----*----------------------- ------- | |||
RC-051 B9.ll 2-20 4"-RC-15-1502 3 UT/PT 0 | |||
----------------------------------- | |||
RC-051 B9.ll 2-19 4"-RC-15-1502 3 Uf/PT 0 RC-051 B9.ll 2-18A (PSI) 4"-RC-15-1502 2 UT/PT 0 RC-051 B9.ll 1-20 4"-RC-14-1502 3 UT/PT 0 RC-051 B9.ll 2-26 (PSI) 4"-RC-15-1502 2 UT/PT 0 | |||
------------- | |||
RC-051 B9.ll 2-24 4"-RC-15-1502 3 UT/PT 0 | |||
--------------- | |||
RC-052 B9.II 1-02 6"-RC-39-1502 UT/PT 0 | |||
-------------------- | -------------------- | ||
RC-052 B5.40 1-0IDM 6"-RC-39-1502 UT/PT 0 RC-052 B9.ll 1-08 6"-RC-39-1502 2 UT/PT 0 | |||
-------- | |||
RC-053 B9.II 2-02 6"-RC-38-1502 | |||
------------------------------ | |||
2 UT/PT 0 | |||
RC- | --- ------- ---------* | ||
------- | -------------------*--------------- ------------ | ||
------------------- | RIIISI Plan and ASI\IE XI Sorted by RIIISI Segments, SPSU13 Database Page 36 of 40 Print Date: 7129198 | ||
------ | |||
* | Segment | ||
** XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period | |||
-- | * RB Method | ||
------------ --- - . -- - - - - | |||
* | RC-053 B9.l l 2-08 6"-RC-38-1502 2 UT/PT 0 | ||
------------------ | |||
- | RC-053 85.40 2-0lDM 6"-RC-38-1502 2 UT/PT Rl.11 2 UT RC-054 B5.40 4-0lDM 6"-RC-37-1502 2 UT/PT 0 RC-054 89.11 4-02 6"-RC-37-1502 2 UT/PT 0 RC-054 B9.ll 4-08 6"-RC-37-1502 2 UT/PT 0 | ||
-----------------------*---------------------- | |||
RC-057 89.32 3-07BC 3"-RC-35-1502 2 PT 0 | |||
*----------------------*----------------*------ ----- | |||
----- | RC-057 85.40 3-0lDM 4"-RC-34-1502 2 UT/PT 0 | ||
------ | |||
RC-057 89.11 3-02 4"-RC-34-1502 2 UT/PT 0 RC-058 B9.21 3-10 3"-RC-35-1502 2 PT 0 RC-058 89.40 19 3"-RC-35-1502 3 PT Rl.11 3 Uf(l) | |||
RC-059 89.21 3-16 3"-RC-61-1502 2 PT 0 RC-059 B9.40 18 3"-RC-61-1502 0 PT Rl.1 I 3 UT(!) | |||
RC-060A 89-32 3-0IBC 11/z''-RC-105-1502 3 PT 0 | |||
========== | ------------------ | ||
RC-060A 89.40 3-05 1'h"-RC-105-1502 3 PT 0 RC-0601\ 89.40 3-07 l 1/,"-RC-105-1502 | |||
----------*--* *---- | |||
3 PT RLI 1 3 UT (IJ | |||
- - - - - - - - - *------- ------- - - - - - | |||
RIHSI Pinn and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 37 of 40 Print Date: 7/29/98 | |||
Segment | |||
* XI Item No. | |||
* | |||
!\lark No. ====~L~in~e~N~urn~b=-=e~r====~X:::::I=-=P=e:::::rl=-=od==X=I=l\=l=e=th=o=d===R=B=I=te=m=N=o=.=====R=B=P=e=n=*o=d===R=B=M=e=th=o=d=== | |||
RC-060B B9.40 3-11 l l/,"-RC-105-1502 3 PT 0 RC-061 89.40 1-04 2"-CH-68-1502 3 PT 0 RC-061 89.32 4-0IBC 2"-CH-68-1502 2 PT 0 RH-002 89.11 1-06 14"-RH-1-1502 0 Rl.16 2 lff RH-003 CS.I I 2-02 12"-RH-19-602 2 UT/PT 0 | |||
---------------------------* | |||
Rll-003 CS.II 2-07 !4"-RH-2-602 2 UT/PT 0 | |||
--------------- | |||
Rll-003 CS.II 2-03 12"-RH-12-602 3 UT/PT 0 | |||
---- ----------------*------------***--- | |||
RH-003 CS.II 3-11 12"-RH-6-602 2 lff/PT 0 | |||
------ | |||
RH-003 CS.12 0-14L 12"-RH-19-602 3 UT/PT 0 Rll-003 C5.12 0-16L I 2"-RH-12-602 3 UT/PT 0 | |||
--------- | |||
Rll-003 CS.12 0-0IL 14"-RH-18-602 UT/PT 0 | |||
---------- | |||
RH-003 CS.II 1-45 I O"-RH-7-602 0 Rl.16 3 UT | |||
--------- | |||
Rll-003 CS.II 2-26 12"-RH-19-602 2 lff/PT 0 | |||
. Rll-003 CS.II 2-29 12"-RH-19-602 3 UT/PT 0 | |||
------------------- | |||
Rll-003 C5.II 2-16 10"-RH-16--1502 UT/PT 0 | |||
****------------*** -*----------------------- | |||
RIIISI Plan and ASl\lE XI Sorted by RBIS! Segments, SPSU13 Database Page 38of 40 Print Date: 7/29198 | |||
:-_-_::::_-_-_-_*--_:::-_.-:c-=*=-: L Segment-=_:_-::__-::==--:.::==-=~:~~~m N ~ : _ _ _ _ - - - - - - - - - ~ ~ ~ - - - - ine N b XI Period XI Method RB Item No. | |||
um==e=r=================================== | |||
RB Period | |||
* RB Method Rll-003 C5.I I 2-01 14"-RH-18-602 Uf/PT 0 | |||
*----------- | *----------- | ||
Rll-003 C5.12 0-13L 14"-RH-2-602 2 Uf/PT 0 Rll-003B C5.l l 2-09 6"-RH-14-602 Uf/PT Rl.16 ur RH-008 B9.ll 1-12 10"-RH-16-1502 3 Uf/PT 0 Rll-008 89.ll 1-11 10"-RH-16-1502 2 UT/PT 0 | |||
- - - - - - - - -------- | |||
Rll-008 B9.ll 2-01 10"-RH-16-1502 Uf/PT 0 | |||
- | |||
RH-009 B9.l l 2-04 I O"-RH-17-1502 2 UT/PT 0 | |||
--------------------- | |||
Rll-011 NA 3-AF 6"-RH-20-152 0 Rl.16 3 ur Rll-011 NA 1001 6"-RH-20-152 0 Rl.16 3 ur RS-003A C5.ll 1-03 12"-RS-8-153 UT/PT Rl.16 UT | |||
------------------------- | |||
RS-0038 C5.ll 1-02 l 2"-RS-8-153 UT/PT 0 RS-004A *----*- | |||
C5.ll 1-06 12"-RS-7-153 3 Uf/PT Rl.16 3 ur | |||
---------------------- | |||
RS-004B C5.ll 1-05 12"-RS-7-153 2 UT/PT 0 SW-044 NA 1001 11h''-WS-74-21X | |||
------------- | |||
0 RI.I I Uf (l) | |||
------------*- | |||
SW-045 NA 1002 I 1/,"-WS-75-2 IX 0 Rl.11 UT (I) | |||
RBISI Plan and ASI\IE XI Sorted by RBIS( Segments, SPSU13 Database Page 39of 40 Print Date: 7129198 | |||
r Segment XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period | |||
* RB Method SW-046 NA 1003 I \lz''-WS-450-2 IX 0 RI.I I 3 lIT (I) | |||
---------------*-- | |||
SW-047 NA 1004 1\lz''-WS-451-21X 0 RI.I I 3 lIT(I) | |||
SW-054 NA 1005 2"-WS-560-21X 0 Rl.J I 3 UT(!) | |||
VS-001 NA 1001 1"-VS-23-151 0 RI.I I 3 UT(!) | |||
VS-002 NA 1002 l'l,"-CHR-151 0 Rl.12 3 VT-2/PT | |||
*---------*---------------------- | |||
Record Count: 590 RIIISI Plan and ASl\1E XI Sorted by RBISI Segments, SPSU13 Database Page 40of 40 Print Date: 7129198}} | |||
Record Count: 590 RIIISI Plan and ASl\1E XI Sorted by RBISI Segments, SPSU13 Database Page 40of 40 Print Date: 7129198}} |
Revision as of 01:20, 21 October 2019
ML18151A723 | |
Person / Time | |
---|---|
Site: | Surry ![]() |
Issue date: | 08/07/1997 |
From: | VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.) |
To: | |
Shared Package | |
ML18151A650 | List: |
References | |
PROC-970807, NUDOCS 9808180176 | |
Download: ML18151A723 (67) | |
Text
... "'/*,*~ .. . -- ..:~: ... **-* ...
I
.I I I
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1 PROBABILISTIC SAFETY ANALYSIS PRODUCTS NUCLEAR SAFETY ANALYSIS MANUAL PART IV, CHAPTER A PROBABILISTIC SAFETY ASSESSMENT PRODUCTS Revision No. 1 Effective Date: July, 1997 Nuclear Safety Analysis
- Nuclear Analysis and Fuel Virginia Power 1m. Prepared By
'?J/?fq')
Date g./]-C/1 Date
- -- -----
- -9808180176 980813 PDR ADOCK 05000280 G
-
- - --. _-.*- ..... :r.~.-- .. -~** ... *-*'*----------.**.**.*;:.:::-,;~..::-- __ *;._.:.--_. * .. *. '- ~-~.>~*-::..-***;, *--* ,.,
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1
- PROBABILISTIC SAFETY ANALYSIS PRODUCTS TABLE OF CONTENTS
- 1. 0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.0 PSA MODEL UPDATE FREQUENCY .............................. 3 3.0 PSA PRODUCTS 3
4.0 REFERENCES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
- Page 2
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1
- PROBABILISTIC SAFETY ANALYSIS PRODUCTS REVISION
SUMMARY
REV. NO. DESCRIPTION 1 Revision 1 adds requirements contained in STD-GN-0044 and VPAP-2604 to the list of PSA products and customers .
- Page 3
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1
- PROBABILISTIC SAFETY ANALYSIS PRODUCTS
1.0 INTRODUCTION
The purpose of this chapter is to provide a simple listing of the major PSA products required by Reference 1. Section 2.0 discusses maintenance of the PSA models which are the primary PSA products.
Section 3 presents a list of the PSA products.
2.0 PSA MODEL UPDATE FREQUENCY The primary products produced by the PSA group are the North Anna and Surry PSA models. In order to support the safe and efficient operation of the stations it is a requirement that the models be updated periodically to_ what has been called the II as-built as-operated II condition of the station. Therefore, periodic model revisions should be made corresponding roughly to the refueling outage schedules since this is the time that most plant changes are implemented. Since the refueling is performed at about 18 month intervals this is the appropriate interval for revisions. It should be noted however, that an update could be made at any time deemed appropriate by management to account for an intermediate outage or to allow for other model revisions.
Model revisions are classified as updates if the change is to account for facility modifications, equipment reliability or unavailability data update, or human reliability and plant specific operating events. If the revision is to account for model improvments or computer code enhancements the process is called an upgrade. More frequent updates can be made if plant hardware or procedure modifications significantly impact the model or if the state-of-the-art changes such that an upgrade is required. Every effort should be made to keep these models as similar as possible. In this way, engineering resources are used most efficiently. This approach also achieves a consistent application of PSA at both stations. The output from these revised models are then used in a variety of applications.
3.0 PSA PRODUCTS The company has elected to use PSA as part of the maintenance rule risk ranking process (lOCFR 50. 65 a (2)) . Therefore, the systems, structures and components (SSCs) that meet defined risk
- criteria are considered for performance monitoring. Two Page 4
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1
- PROBABILISTIC SAFETY ANALYSIS PRODUCTS engineering transmittals (ET) are used for this purpose: ET-NAF-96-0204 for North Anna and ET-97-0051 for Surry. The ETs are revised as necessary to document model revisions. Secondly, the maintenance rule ( 10CFR50. 65 a (3)) requires an evaluation of the components to be taken out of service so that the configuration risk is maintained at an acceptable level. These evaluations have been termed on-line maintenance evaluations. PSA is also used to support this part of the maintenance rule. As a result, whenever the models are updated the list of risk significant SSCs and online maintenance matrix must be updated. This update process should take place within the sixty days of completing the model revision.
Another area where PSA is currently used is to support operator training. Input to the training departments consists of appropriate material showing the dominant accident sequences.
This material could. take the form of a poster or chart.
Individual sequences could be listed and discussed. The product
- to be provided is the signifcant contributors to core damage. The method by which this information is conveyed can change to meet specific user needs.
The Severe Accident Management Guideline (SAMG) Program is controlled by procedure VPAP-2604. The VPAP includes a requirement in Step 5.8 that changes to the IPE must be considered for initiating changes to the SAMGs The intent of the VPAP is to include changes to the PSA model (the PSA model is the replacement to the IPE) . Therefore, one output from a model update is to document the significant changes to the model in an ET that discusses how the dominant sequences have changed since the last update. This discussion should identify any proposed enhancements to station procedures, including the SAMGs, resulting from the PSA model update. The ET can be used to determine the necessary changes to operator training and procedure improvements.
The list of PSA products is presented in Table 1. This list indicates the product, update frequency and the end user .
- Page 5
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1
- PROBABILISTIC SAFETY ANALYSIS PRODUCTS Table 1 List of PSA Products Item Product Update End User Frequency 1 NAPS PSA Internal Events 18 mo NSA Model 2 SPS PSA Internal Events 18 mo NSA Model 3 Surry Unit 1 ISI Ranking 60 Days of Nuc Eng
.. PSA Model (NDE/ISI) 4 Input to operator - 120 Days of Nuc Training training PSA Model 5 Risk Significant sscs 60 Days of Corporate PSA Model Maintenance Rule Coordinator
- Tool for on-line 6 60 Days of Scheduling, SNS maintenance evaluation PSA Model and Operations (e .g
- I matrix or safety monitor) 7 List of Risk Significant 60 Days of Scheduling SNS Functional Equipment PSA Model and Operations Groups 8 Reliability and 60 Days of Corporate Unavailability PSA Model Maintenance Rule Allocations In Support of Coordinator and the MR MRWG 9 MOV Risk Ranking (GL 89- 60 Days of Station
- 10) PSA Model Maintenancece 10 Input To SAMG 60 Days of Supervisor PSA Model Nuclear Safety Analysis
- Page 6
NULCEAR SAFETY ANALAYSIS MANUAL - PART IV, CHAPTER A, REVISION 1
- PROBABILISTIC SAFETY ANALYSIS PRODUCTS
4.0 REFERENCES
- 1) Probabilistic Safety Assessment Analysis, Nuclear Analysis and Fuel Implementing Procedure (NAF-239, Rev 0), January, 1997.
- 2) Supplemental Maintenance Rule Guidelines, STD-GN- 0 044, June 30, 1997.
- 3) Severe Accident Management Guideline (SAMG) Program, VPAP-2604, Revision o, June 10, 1997 .
- Page 7
- ENCL0SURE2 REVISED RISK-BASED INSERVICE INSPECTION PLAN SURRY POWER STATION UNIT 1 (Note 1 to the examination method in the enclosed inspection plan indicates that if the location is a socket weld, a relief request from the Code required volumetric examination will be submitted at a later date providing an alternative examination.)
- ---------
- Dra'l\ing No. !\lark No. Line Number Period Category Item No. ISi Oass Credit Method 11448-CBB-04 I A-3 1001 l"-VS-23-151 3 R-A RI.I I 38 y UT(!)
ReUcf Request Revision Comments RBISI NOTE: Perform UT examination on weld nearest valve 1-VS-PCV-533 on Segment VS-001 line 1"-VS-23-151. There is no weld number 1001, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan.
11448-CBB-04 l A-3 1002 IY,-CHR-151 3 R-A Rl.12 38 y VT-2/PT ReUef Request Revision Comments RBISI NOTE: Perform PT examination on !st weld on discharge side of pump I-VS- Segment VS-002 P-2B on line I Y,-CHR-151. There is no weld number I 002, this is used only to sort the database. New with Rev. I to the RBISI plan: PT examination augmented by subpanel, and added VT-2 each refueling outage.
11448-CBl\1-071B-3 1001 l 1,1:"-WS-74-2 !X R-A RI.I I 38 y UT(!)
ReUef Request Revision* Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I Y,-WS-74-2 IX Segment SW-044 on valve 1-SW-115 side of reducer. There is no weld number 1001, this is used only to sort the database. Changed PT to UT, with Rev. 1 to the RBISI plan.
11448-CBM-07IB-3 1002 I Y,"-WS-75-21X R-A RI.I I 38 y UT(!)
ReUef Request Revision Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I V,"-WS-74-2IX Segment SW-045 on valve l-SW-110 side of reducer. There is no weld number 1002, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan.
11448-CB1\1-07IB-3 1003 I V,"-WS-450-2 IX 3 R-A RI.II 38 y UT(!)
Relief Request Re,*lslon Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I V."-WS-450- Segment SW-046 2 IX on valve I-SW-896 side of reducer. There is no weld number 1003, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS I plan.
11448-CBl\1-07 IB-3 1004 l'/,"-WS-451-21X 3 R-A RI.I I 38 y UT(!)
ReUef Request Revision Comments RBIS! NOTE: Perform UT examination on weld at reducer on line I Y,-WS-451- Segment SW-047 2 IX on valve 1-SW-897 side of reducer. There is no weld number 1004, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan.
11448-CBl\1-071 B-3 1005 2"-WS-560-21X 3 R-A y RI.I I 38 UT(!)
Relief Request Revision Comments RBIS! NOTE: Perform UT examination on weld at tee on line 2"-WS-560-21X Segment SW-054 (where 2"-WS-560-2 IX connects to I V,"-WS-450-21X) on line 1"-WS-571-21X side of tee. There is no weld number 1005, this is used only to sort the database. Changed PT to UT, with Rev. I to the RBIS! plan.
11448-l\1KS-1022AI 1-2 1001 3"-CC-820-1501 R-A y RI.I! 38 UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on the weld nearest to penetration #110 on Segment CC-28B line 3"-CC-820-150 I. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: MT augmented by subpanel.
11448-MKS- I 022AI 2-3 1001 2W'-CC-88-15 I R-A Rl.12 38 y VT-2/UT/MT RcUef Request Comments RBIS! Note: Perform UT/PT or UT/MT on the 1st weld downstream of 4"x2V," Segment CC-28A reducer on line 2\l,-CC-88-151. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: 1 TT/MT augmented by subpanel, VT-2 each refueling outage.
RBISI Plan Sorted by Drawing nnd Mnrk No., SPSU13 Database Page 1 of 18 Print Date: 7/29/98
- Method
!\lark No. Line Nwnber Period Category Item No. ISI Oass Credit 11448-MKS-1022A 12-3 1002 I \/2"-CC-803-150 I R-A Rl.12 38 y VT-2/PT Relief Request Revision Comments RBIS! Note: Perform PT examination on weld connecting 4"xl 'h" reducer on line* Segment CC-28A l 'h"-CC-803-150 I. Note there is no mark/weld number 1002, this is used to sort the
!SI database only. New with Rev. 1 to the RBIS! plan: PT augmented by subpanel, VT-2 each refueling outage.
11448-MKS-1105812-1 1001 3"-CH-99-152 R-A RI.I! 28 y UT(!)
Relief Request Re,*islon Comments RBIS! Note: Perform UT examination on weld nearest penetration #19 on line 3"-CH- Segment CH-005 99-152. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Changed PT to UT.
11448-MKS-1122A4-1 1001 3"-WGCB-I-601 R-A RI.IS 28 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT OR UT/MT on the weld nearest to penetration #39 on Segment BD-0028 line 3"-WGCB-1-601. Also see drawing 11448-CBM-124A-3. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI. I!, Segment in FAC program, and UT/MT (R 1.11) is secondary damage mechanism.
11448-~IKS-1122A4-1 1002 3"-WGCB-105-601 R-A Rl.18 NC y UT/MT Relief Request Comments RBIS! Note: Perform UT/PT OR UT/MT on weld at elbow downstream of valve 1- Segment BD-003 BD-150 on line 3"-WGCB-105-601. Also see drawing 11448-CBM-124A-3. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (Rl.11) is secondary damage mechanism.
11448-MKS-! !22A5-l 1001 3"-WGCB-2-601 R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on the elbow to reducer weld upstream of Segment BD-0058 valve TV-BD-IOOD on line 3"-WGCB-2-601. Note there is no mark/weld number 1001, this is used to sort the ISi databasey only. New with Rev. 1 to the RBIS! plan:
Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (RI.I!) is secondary damage mechanism.
11448-MKS-l 122A5-1 1002 3"-WGCB-106-601 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on branch tee weld connecting line 3"- Segment BD-006 WGCB-2-601 to line 3"-WGCB-106-601. The weld to be examined is on line 3"-
WGCB-106-601. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. 1 to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (Rl.11) is secondary damage mechanism.
11448-MKS-1122A6-l 1001 3"-WGCB-3-601 R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on weld connecting at 3rd elbow from Segment BD-0088 penetration #40 on line 3"-WGCB-3-601. Note there is no mark/weld number 100 !,
this is used to sort the ISi database only. New with Rev. 1 to the RBIS! plan:
Change item No. to Rl.18 from RI.! 1, Segment in FAC program, and UT/MT (RI.I!) is secondary damage mechanism.
- ------------------ - - - - - - - - - - -
RRISI Plan Sorted by Drawlne and l\lark No., SPSU13 Database Page 2 of 18 Print Date: 7/29198
- Dra\\ing No. Mark No. Line Nmnber Period Category Item No. ISi Dass Credit Method l 1448-l\lKS-l l22A6-l 1002 3"-WGCB-107-601 R-A Rl.18 NC y UT Relief Request Re,*lslon Comments RBIS! Note: Perform UT examination on I" weld at 3"xl" Tee that connects to 3"- Segment 8D-009 WGCB-107-601 downstream of valve 1-BD-170. Note there is no mark/weld number I 002, this is used to sort the !SI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment in FAC program, and UT (R 1.11) is secondary damage mechanism.
l 1448-MKS-l l2L2-2 1001 3"-CC-820-1501 R-A RI.I I 38 y UT/MT Relief Request Revision Comments RBIS! Note: Perform UT/PT or UT/MT on the weld at elbow nearest to penetration Segment CC-29
- 110 on line 3"-CC-820-150 I. Note there is no mark/weld number 100 I, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Added that MT augmented by subpanel.
l 1448-MKS-131Al-4 1001 3"-SHP-57-601 R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT or UT/PT examination on weld at tee connecting Segment MS-032 line 3"-SHP-57-601 and 3"-SHP-31-601 on 3"-SHP-57-601 side of tee. Note there is no mark/weld number I 00 I, this is used to sort the !SI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (RI. I I) is secondary damage mechanism.
I 1448-MKS-131Al-4 1002 3"-SHP-57-60 I R-A Rl.18 28 y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT or UT/PT examination on weld nearest valve 1-PCV- Segment MS-033 MS-1028 on line 3"-SHP-57-601. The weld to be examined is on the same side ofthe valve l-PCV-MS-102B as VSS-9. Note there is no mark/weld number 1002, this is used to sort the ISI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from.RI.I I, Segment in FAC program, and Uf/MT (Rl.11) is secondary damage mechanism.
l 1448-MKS-131Al-4 1003 3"-SHP-57-60 I R-A Rl.18 y 28 VT-2 Relief Request Revision Comments RBIS! NOTE: New with Rev. I. Segment is in the F AC program. VT-2 (Rl.12) is Segment MS-034 the secondary damage mechanism. VT-2 each refueling outage.
11448-None AFW Lube Oil Cooler Piping For P-38 - - - - - ---------
3 R-A Rl.13 NC y UT-Thickness Relief Request Revision Comments RBIS! Note: Perform UT Thickness, VT-2 (Rl.12) is secondard damage mechanism, Segment AFW-32 VT-2 each refueling outage.
11448-None AFW Lube Oil Cooler Piping For P-2 R-A Rl.13 NC y UT-Thickness Relief Request Revision Comments RBIS! Note: Perform UT Thickness, VT-2 (Rl.12) is secondard damage mechanism, Segment AFW-30 VT-2 each refueling outage.
11448-None AFW Lube Oil Cooler Piping For P-3A 2 R-A Rl.13 NC y UT-Thickness Relief Request Revision Comments RBIS! Note: Perform UT Thickness, VT-2 (Rl.12) is secondard damage mechanism, Segment AFW-31 VT-2 each refueling outage.
RHISI Plan Sorted by Drawing and 1\lark No., SPSU13 Database Page 3 of /8 Print Date: 7129198
- Dral\ing No. Mark No. Line Number Period Category Item No. ISi Dass Credit Method 11448-WFPD-13 1001 14"-WCPD-37-301 2 R-A Rl.18 NC y UT/MT Relief Request Re,*lslon Comments RBIS! NOTE: Perform UT/MT examination on weld at reducer l-CN-PSFR-22 on Segment FW-001 14" side on line 14"-WCPD-37-30 I. Note there is no mark/weld number 100 I, this is used to sort the !SI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment is in FAC program, and UT/MT (RI.I I) is secondary damage mechanism.
11448-WFPD-13 1002 16"-WHPD-3-301 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT examination on weld connecting piece 1-SD-PSFl- Segment FW-002 59 to piece l-SD-PPS-258 on line 16"-WHPD-3-301. Note there is no mark/weld number I 002, this is used to sort the ISi database only. New with Rev. I to the RBISI plan: Change item No. to Rl.18 from RI.I I, Segment is in FAC program, and UT/MT (RI.I I) is secondary damage mechanism.
11448-WFPD-13 1003 ! 8"-WCPD-33-30 I 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT examination on weld nearest pump 1-FW-P-IA on Segment FW-003 line 18"-WCPD-33-301. Note there is no mark/weld number 1003, this is used to sort the !SI database only. New with Rev. 1 to the RBISI plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (Rl.11) is secondary damage mechanism.
11448-WFPD-13 1004 18"-WCPD-32-301 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBISI NOTE: Perform UT/MT examination on weld nearest pump 1-FW-P-IB on Segment FW-004 line l 8"-WCPD-32-301. Note there is no mark/weld number 1004, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (Rl.11) is secondary damage mechanism.
11448-WFPD-14 IOOI 14"-WCPD-71-301 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/Mt examination on weld nearest and upstream ofR0- Segment FW-005 109A on line 14"-WCPD-71-301. (This should be a weld on piece l-CN-PPS-127 nearest to R0-109A.) Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBISI plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (RI.I I) is secondary damage mechanism.
11448-WFPD-15 IOOI !8"-WFPD-1-901 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBISI NOTE: Perform UT/MT examination on weld nearest and downstream of Segment FW-006 check valve !-FW-127 on line 18"-WFPD-1-901, on piece l-FW-PSF2-3. (Also see drawing 11448-FM-068A- valve No. is shown on the FM drawing.) Note there is no mark/weld number IOO I, this is used to sort the ISI database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment is in FAC program, and UT/MT (Rl.11) is secondary damage mechanism.
RIIISI Plan Sorted by Dral\ing and Mark No., SPSU13 Database Page 4 of 18 Print Date: 7129/98
- Dra\\ing No. !\lark No. Line Nwnber Period Category Item No. ISi Class Credit Method
=
11448-WFPD-17 1001 18"-WFPD-2-901 2 R-A Rl.18 NC y UT/MT Relief Request Revision Comments RBIS! NOTE: Perform UT/MT examination on weld nearest and downstream of Segment FW-007 check valve I-FW-112 on line 18"-WFPD-2-901, on piece l-FW-PSF2-18. (Also see drawing I 1448-FM-068A-valve No. is shown on the FM drawing.) Note there is no mark/weld number 100 I, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment is in FAC program, and UT&,IT (R 1.11) is secondary damage mechanism.
11448-WMKS-OIOOAIZ 1-01 1'/z"-CH-97-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New to plan with Rev. 3 to plan. Designated weld as Segment CH-008 terminal end due to licensing concerns (John Lewis). See memo Paul to Lewis of8-16-94. Replaces weld 1-06 on same line No. & drawing No. New with Rev. 5 to Plan: Weld 1-01 reported as being inaccessible by Dan Jensen on 9-15-95. Weld 1-06 added back into plan in order to keep the weld selection percentages the same.
Relief Request SR-014 submitted to report that terminal end weld (weld 1-01) cannot be examined unless the pump is disassembled. New with Rev. 8 to plan: Weld is scheduled for exam. during the 1997 refueling outage because the pump was disassembled. RBIS! Note: Perform PT/VT-2 examination. New with Rev. I to the RBIS! plan: Vf-2 each refueling outage, and PT is augmented by subpanel.
11448-WMKS-OIOOAIZ 1-03 1'/z"-CH-97-1507. 2 R-A Rl.12 IA y PT/VT-2 Relief Request Re\'lslon Comments SOCKET WELD, (WEPSOK). RBISI Note: Perform PT & Vf-2 examination. Segment CH-008 New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOOAIZ 1-07 I V,"-CH-97-1502 2 R-A Rl.12 IA y PT/Vf-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! Note: Perform PT & VT-2 examination. Segment CH-008 New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOOAIZ 1-19 2"-CH-97-1502 R-A Rl.12 y IA PT/VT-2 Relief Request Revision Comments SOCKET WELD , (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment CH-011 Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
I 1448-WMKS-OIOOA4Z l-07A 2"-RC-53-1502 R-A y Rl.12 IA VT-2/PT Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment RC-027 Rev. 1 to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel.) Changed Mark No. from 1-07 to l-07A, (weld 1-07 was cut out and replaced with l-07A). Changed Item No. from Rl.11 to Rl.12.
I 1448-WMKS-OIOOA6Z 1-02 2"-RC-198-1502 R-A Rl.12 IA y PT/Vf-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT/VT-2 examination. Segment RC-037 New with Rev. 1 to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel).
*---------------------*-
RBIS! Pian Sorted by Dra\\ing and Mark No., SPSU13 Database Page 5 of 18 Print Date: 7129198
- Dra_"_i~t~~~:- -=-======:===l\=l=a=rk=N=o=.========L=ln=e=N=wn==be=r========P=eri=o=d==c=a=t=e=go=ry===I:=t=em=N=::o=.====::IS=l=Cl::=as=s=====:C:;=r=ed::l:=t=====:=M;=e=:;th~o=d;======
- 11448-WMKS-OIOOA6Z 1-03 2"-RC-198-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New Segment RC-037 with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOOAZ-l 1-0IDM 29"-RC-1-250 IR R-A RI.I I IA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-001 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE:
Perform UT examination.
11448-WMKS-OIOOAZ-l l-17DM 27'/z"-RC-3-250 IR 3 R-A RI.I I IA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL - NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-013 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE:
Perform UT examination.
11448-WMKS-OIOIAIZ 1-01 l 'lz"-CH-95-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). Terminal End designator add with Rev. 3 to plan. Segment CH-009 RBIS! NOTE: Perform PT & Vf-2 examination. New with Rev. 1 to the RBIS!
plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOIAIZ 1-03
11/,"-CH-95-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). INSPECTION REQUIRES FLANGE Segment CH-009 SEPERATION. RBIS! NOTE: Perform PT & Vf-2 examination. New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel.)
11448-WMKS-OIOIAIZ 1-04 I V."-CH-95-1502 2 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New with Rev. 9 to plan: This weld is added to the Segment CH-009 plan to replace weld 1-01 on the same drawing and line number. This weld is an additional weld and is scheduled for examination to ensure that 25% of examination category B-J welds are examined in the event that weld 1-0 I is not examined. Weld 1-01 is inaccessible unless the RCP main flange is disassembled. See relief request SR-014. RBIS! NOTE: Perform PT & Vf-2 examination. New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOIAIZ 1-23 2"-CH-95-1502 R-A y Rl.12 IA PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment CH-012 Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOIA2Z 1-0IBC 2"-RC-57-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments BRANCH CONNECTION WELD, (WEPBC), < 4 IN. NPS. RBIS! NOTE: Segment RC-028 Perform PT examination. New with Rev. I to the RBIS! plan: Perform Vf-2 each refueling outage. (PT augmented by subpanel).
RBI SI Plan Sorted by Drawing and Mark No., SPSU13 Database Page 6of 18 Print Dare: 7129/98
Drawing No.
11448-W~IKS-OIOIA3Z Mark No.
1-02 Line Number 2"-RC-199-1502 Period 3
Category R-A Item No.
Rl.12 ISi Oass IA Credit y PT/Vf-2
- Method Relief Request Revision Comments Circumferential Piping Weld, (WEPCB). RBIS! NOTE: Perform PT/Vf-2 Segment RC-038 examination. New with Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOIA3Z 1-05 2"-RC-199-1502 3 R-A Rl.12 IA y PT/Vf-2 Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform PT Segment RC-038 examination. New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-OIOIAZ-1 1-0IDM 29"-RC-4-2501R R-A RI.I I IA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-002 (SR-001) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE:
Perform UT examination.
11448-WMKS-OIOIAZ-1 l-05DM 29"-RC-4-2501R 2 R-A RI.I I lA y UT Relief Request Re,*lslon Comments STEAM GENERATOR- NOZZLE TO SAFE END BUTT WELD. Added with Segment RC-005 Rev. I to the RBIS I plan: RBIS! NOTE: Perform UT examination.
11448-WMKS-O\OIAZ-1 l-06DM 3 l "-RC-5-2501R 2 R-A Rl.11 IA y UT Relief Request Re,*lslon Comments STEAM GENERATOR - NOZZLE TO SAFE END BUTT WELD. Added with Segment RC-008 Rev. I to the RBIS! plan: RBIS! NOTE: Perform UT examination.
11448-WMKS-OIOIAZ-1 1-17DM 27'!,"-RC-6-250 IR 3 R-A Rl.11 lA y UT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BUTT WELD. Per Relief Request Segment RC-014 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE:
Perform UT examination.
11448-WMKS-0102AIZ 1-01 l Y,"-CH-93-1502 2 R-A Rl.12 IA y PT/Vf-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New with Rev. 9 to plan: This weld is added to the Segment CH-010 plan to ensure weld 1-01 is examined if the RCP main flange is disassembled. Weld 1-01 is inaccessible unless the RCP main flange is disassembled. See relief request SR-014. RBIS! NOTE: Perform PT & VT-2 examination. New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel) .
. l 1448-WMKS-0102AIZ 1-03 l 1/,"-CH-93-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT & VT-2 examination. Segment CH-010 New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
RIIISI Plan Sorted by Drawing and Mark No., SPSU13 Database Page 7of 18 Print Dare: 7129/98
-_D--i.:--w--i~-g--N-,~--:~"----------=--------=---*=--=-=--=l\=l=a=rk=N=o=.========L=ln=e=N=u=m-=-b=-e=r-=-==-=-=_=-_=-=_----=~=-:==-=-=--=P=en=*o=d==c=a=t=e=go=ry===I=t=em=N=:=o=.====:=IS=1=CI:::=as=s====~C:=r=ed::i::=t=====:=M~e~th~o=d~--=-==---=--=--=--=--=-
-__-_-_~=--=~-----=:-
11448-WMKS-0102AIZ
__-__ ~====----=~~--~--=--=-====~~~======~-====================================================
1-04 I W'-CH-93-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request SR-014 Revision Comments SOCKET WELD, (WEPSOK). New with Rev. 9 to plan: This weld is added to the Segment CH-010 plan to replace weld 1-0 I on the same drawing and line number. This weld is an additional weld and is scheduled for examination to ensure that 25% of examination category B-J welds are examined in the event that weld 1-0 I is not examined. Weld I-OI is inaccessible unless the RCP main flange is disassembled. See reliefrequest SR-O14. RBIS! NOTE: Perform PT & VT-2 examination. New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
I 1448-WMKS-0102AIZ 1-07 I Yi"-CH-93-1502 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT & VT-2 examination. Segment CH-010 New with Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
l 1448-WMKS-0102AIZ 1-14 2"-CH-93-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment CH-013 Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
11448-Wll.lKS-0102A2Z 1-09 2"-RC-58-1502 2 R-A Rl.12 IA y PT/VT2 Relief Request Revision Comments SOCKET WELD, (WEPSOK), Terminal End. RBIS! NOTE: Perform PT Segment RC-029 examination. New with Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel). Changed Item No. from RI.I I to Rl.12.
11448-WMKS-0102A3Z 1-02 2"-RC-200-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBISI NOTE: Perform PT/VT-2 examination. Segment RC-039 New with Rev. I to the RBIS! plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
I 1448-WMKS-0102A3Z 1-07 2"-RC-200-1502 3 R-A Rl.12 IA y PT/VT-2 Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Segment RC-039 Rev. I to the RBISI plan: Perform VT-2 each refueling outage. (PT augmented by subpanel).
11448-WMKS-0102AZ-1 1-0IDM 29"-RC-7-250 IR R-A RI.II IA y ITT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL- NOZZLE TO SAFE END BITTT WELD. Per Relief Request Segment RC-003 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBISI NOTE:
Perform ITT examination.
11448-WMKS-0102AZ-l 1-17DM 27Yi"-RC-9-250 IR 3 R-A RI.I I IA y ITT Auto Relief Request SR-001 Revision 0 Comments REACTOR VESSEL - NOZZLE TO SAFE END BITTT WELD. Per Relief Request Segment RC-015 (SR-00 I) perform a full volumetric examination from the ID (with 5% notch sensitivity on the OD) in lieu of the surface examination from the OD. RBIS! NOTE:
Perform ur examination.
- - - -------------~--~-
RBrSI Pian Sorted by Drawing and Mark No., SPSU13 Database Page 8of 18 Print Date: 7/29/98
- Period Category Item No. ISi Class Credit
- Method Dra"ing No. !\lark No. Line Number 11448-Wl\lKS-0103A2-l 1-02 6"-SHP-45-601 3 R-A Rl.18 2A y UT/MT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/MT Segment MS-010 examination. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from RI.I I, Segment in FAC program, and UT/MT (RI.I I) is secondary damage mechanism.
11448-WMKS-0117Al-l 1-06 14"-RH-1-1502 2 R-A Rl.16 IA y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT Segment RH-002 examination.
11448-WMKS-0117A2 1-45 10"-RH-7-602 3 R-A Rl.16 2F y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform lIT Segment RH-003 examination.
11448-WMKS-0118Al 0-13 6"-W APD-2-601 2 R-A Rl.18 2A y UT/MT Relief Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD (WEPCB) 3/8 in. & > nominal wall Segment AFW-015 thickness. RBIS! NOTE: Perform lIT/PT or lIT/MT examination. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (Rl.11) is secondary damage mechanism.
11448-WMKS-0118A2-l 1-MOV-FW-151F 3"-WAPD-10-601 R-A Rl.18 2B y lIT/MT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! Note: Peiform lIT/PT or Segment AFW-016 lIT/MT on the weld at valve l-MOV-FW-151F. The weld is on the same side of the valve as support l-WAPD-H021A New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (RI.I I) is secondary damage mechanism.
11448-WMKS-0118A2-l l-MOV-FW-151F 3"-W APD-10-601 R-A Rl.18 2B y lIT/MT Relief Request Revision Comments CIRCUl\ffERENTIAL PIPING WELD, (WEPCB). RBIS! Note: Peiform lIT/PT or Segment AFW-017 UT/MT on the weld at valve l-MOV-FW-151F. The weld is on the same side of the valve as support l-WAPD-H022. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (Rl.11) is secondary damage mechanism.
11448-WMKS-0118A2-2 l-FW-58 3"-W APD-11-601 R-A y Rl.18 2B UT/PT Relief Request Revision Comments RBIS! Note: Peiform Uf/PT or lIT/MT on the weld at valve l-FW-58. The weld is Segment AFW-018 onthesamesideofthevalveassupport l-WAPD-H006. New withRev. l to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and lIT/MT (RI. I ! ) is secondary damage mechanism.
I 1448-WMKS-O l l 8A2-2 l-FW-MOV-15IB 3"-W APD-14-601 R-A y Rl.18 2B lIT/PT Relief Request Revision Comments RBIS! Note: Peiform lIT/PT or lIT/MT on the weld at valve l-FW-MOV-151B. Segment AFW-019 The weld is on the same side of the valve as valve 1-FW-93. New with Rev. I to the RBIS! plan: Change item No. to Rl.18 from Rl.11, Segment in FAC program, and UT/MT (RI . I I) is secondary damage mechanism.
RBISI Plan Sorted by Dra\\ing and Mark No., SPSU13 Database Page 9of 18 Print Date: l/29198
---*------*-----*-------------
- * - - - - - - - - - - - - - - ===============================:::==::====~=;====
Period Category Item No. ISi Gass Credit Method
- Drawlne No. !\lark No. Line Number
l-FW-142 6"-WAPD-3-601 R-A Rl.13 3E y UT Thickness 11448-W~IKS-0118Gl-1 Relief Request Revision 0 Comments RBIS! Note: Perform UT thickness examination at low-point, I" square area on line Segment AFW-004 number 6"-W APD-3-601 prior to check valve I-FW-142.
11448-W~IKS-OI 18GI-I I-FW-157 4"-WAPD-5-601 2 R-A Rl.13 3E y UT Thickness Relief Request Revision 0 Comments RBIS! Note: Perform UT thickness examination at low-point, I" square area on line Segment AFW-005 number 4"-W APD-5-601 prior to check valve I-FW-157.
I 1448-W~IKS-01 I 8GI-I I-FW-172 4"-W APD-7-601 3 R-A Rl.13 3E y UT Thickness Relief Request Revision 0 Comments RBIS! Note: Perform UT thickness examination at low-point, I" square area on line Segment AFW-006 number 4"-WAPD-7-601 prior to check valve 1-FW-172.
I 1448-WMKS-0122AI 1001 6"-RH-20-152 3 R-A Rl.16 2F UT Relief Request Revision Comments RBISI NOTE: Perform UT examination on a I" square area on line 6:-RH-20-152 Segment RH-Oil adjacent to integral attachment weld H0\4-1. New with Rev. I to the RBIS! plan:
11448-WMKS-0122AI 2-09 6"-RH-14-602 R-A Rl.16 2A y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD (WEPCB). 3/8 in. & > nominal wall Segment RH-003B thickness. RBIS! NOTE: Perform UT examination.
I 1448-WMKS-0122AI 3-AF 6"-RH-20-152 3 R-A Rl.16 2F y UT Relief Request Revision 0 Comments CIRCUMFERENTIAL PIPING WELD (WEPCB). RBISI NOTE: Perform UT Segment RH-011 examination.
- --------------------
I 1448-WMKS-0122HI 1-02 6"-RC-16-1502 3 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBISI NOTE: Perform UT/PT Segment RC-016 examination. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel).
I 1448-WMKS-0122HI 1-08 6"-RC-16-1502 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-016 to plan with Rev. I and replaces weld 1-05 on line 6"-RC-16-1502, 11448-WMKS-0122HI. RBIS! NOTE: Perform UT/PT examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel).
I 1448-WMKS-0122HI 1-09 6"-RC-16-1502 2 R-A RI.I I IA y UT/PT Relief Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-005 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel).
I 1448-WMKS-0!22HI 1-10 6"-RC-16-1502 2 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-005 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel).
-- --- ----- -----------------------------------
'RBIS! Plan Sorted hy Drawlne and Mark No., SPSU13 Database Page JO of /8 Prinr Date: 7129198
- !\lark No. Line Nmnber
- Period Category Item No. ISi Oass Credit Method
- Dra\\ing No.
I 1448-\\'1',IKS-O l 22J I 1-05 6"-RC-21-1502 3 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD 4 in. NPS & >, (WEPCB). RBIS! NOTE: Segment RC-018 Perform UT/PT examination .. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel).
11448-WI\IKS-0122Jl 1-08 6"-RC-21-1502 2 R-A Rl.l l IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-018 with Rev. l to plan and replaces weld 2-03 on 6"-RC-18-1502, I 1448-WMKS-0122KI. RBIS! NOTE: Perform UT/PT examination.. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel).
11448-WI\IKS-0122Jl 1-09 6"-RC-21-1502 2 R-A Rl.l l IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-007 examination. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel).
11448-WMKS-0122JI 1-10 6"-RC-21-1502 2 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-007 examination.. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel).
11448-WMKS-0122Kl 2-03 6"-RC-18-1502 3 R-A Rl.11 IA .Y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). This weld removed with Rev. Segment RC-017 to plan and replaced with weld 1-08 on line 6"-RC-21-1502, I 1448-WMKS-0122Jl.
RBIS! NOTE: Perform UT/PT examination.. New with Rev. I to the RBISI plan:
Added (PT augmented by subpanel).
11448-WI\IKS-0122Kl 2-08 6"-RC-18-1502 3 R-A Rl.11 IA y lrT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-017 with Rev. I to plan and replaces weld 2-07 on line 6"-RC-18-1502, l 1448-WMKS-0122KI. RBIS! NOTE: Perform UT/PT examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel).
11448-WMKS-0122KI 2-09 6"-Sl-48-1502 2 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-006 examination.. New with Rev. l to the RBIS! plan: Added (PT augmented by subpanel).
11448-WMKS-0122KI 2-10 6"-Sl-48-1502 2 R-A Rl.ll IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT . Segment ECC-006 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanei).
l 1448-WMKS-0123Ql 0-05 12"-CS-2-153 2 R-A Rl.l l 2A y UT/PT Relief Request Revision Comments Circumferential Piping Weld, (WEPCB) 3/8 in. & > nominal wall thickness. RBIS! Segment CS-001 NOTE: Perform UT/PT examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel).
- ---- . - ---*---*-----------------~-------------------------------
RBIS! Plan Sorted by Drawing and Mark No., SPSUI3 Database Page 11 of 18 Print Date: 7129198
--
Drawing No.
I 1448-WMKS-0124AI-I
!\lark No.
18 Line Number 3"-RC-61-1502 Period 3
Category R-A Item No.
RI.I I ISi Class IA Credit y UT(!)
- Method Relief Request Re,*lslon Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perl"orm UT examination. . New Segment RC-059 with Rev. I to the RBIS! plan: Changed PT examination to UT examination.
11448-WI\IKS-0124Al-1 19 3"-RC-35-1502 3 R-A RI.I I IA y UT())
Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform UT examination.. New with Segment RC-058 Rev. I to the RBIS! plan: changed PT examination to UT examination.
11448-WI\IKS-0124Al-1 2-0IDM 6"-RC-38-1502 2 R-A RI.I I IA y UT Relief Request Revision Comments PRESSURIZER - NOZZLE TO SAFE END BUTT WELD. Examine 100%. Added Segment RC-053 with Rev. I to the RBIS! plan: RBIS! NOTE: Perl"orm UT examination.
11448-WI\IKS-0125Al-2 3-07 I '/,"-RC-105-1502 3 R-A Rl.11 lA y UT(!)
Relief Request Revision Comments SOCKET WELD, (WEPSOK), Terminal End. RBISI NOTE: Perform UT Segment RC-060A examination .. New with Rev. I to the RBIS! plan: Changed PT examination to UT examination.
- - - - - - - - - - - -
- I 1448-WMKS-0127Cl 3-BF I O"-Sl-84-152 3 R-A Rl.16 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB) RBIS! NOTE: Perform UT/PT Segment LHI-008 examination.. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel), and changed Item No. from Rl.11 to Rl.16.
11448-WMKS-0127Cl 3-JF IO"-Sl-150-153 3 R-A Rl.11 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBISI NOTE: Perl"orm UT/PT Segment LHI-009 examination.. New with Rev. 1 to the RBISI plan: Added (PT augmented by subpanel).
l 1448-WMKS-0127E2 1-V 8"-SI-14-153 3 R-A Rl.11 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB) RBIS! NOTE: Perform UT/PT Segment LHI-007 examination .. New with Rev. I to the RBIS! plan: Added (PT augmented by subpanel).
11448-WMKS-0127Gl-1 1-ADF 6"-SI-18-152 3 R-A y Rl.12 2F VT-2 Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perl"orm VT-2 Segment LHI-018 examination. . New with Rev. I to the RBIS I plan: Changed Item No. from R 1.11 to Rl.12 and added note: VT-2 each refueling outage.
11448-WMKS-0127Gl-l 1-AKF 6"-SI-19-152 3 y R-A Rl.12 2F VT-2 Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform VT-2 Segment LHI-018 examination. New with Rev. I to the RBIS I plan: Changed Item No. from R 1.11 to Rl.12 and added note: VT-2 each refueling outage.
11448-WMKS-0127Gl-1 1-AQF 6"-SI-78-152 3 R-A Rl.12 2F y lff/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment LHI-018 examination. New with Rev. I to the RBIS! plan: Changed Item No. from R 1.11 to Rl.12 and added note: VT-2 each refueling outage. Also add: (UT/PT augmented by subpanel).
- - ~----- ------- ---- --------- - - - - - - - - - - - - -------
RBIS! Plan Sorted by Drawing and !\lark No., SPSU13 Database Page l2of 18 Print Date: 7/29/98
Dra\\ing No.
- -
- - - - - -------- -----
!\lark No. Line Number Period Category Item No. ISi Oass Credit y VT-2
- Method I 1448-W~IKS-0127Gl-l 1-AUF 6"-Sl-78-152 3 R-A Rl.12 2F Rdkf Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform VT-2 Segment LHl-018 examination. New with Rev. I to the RBIS! plan: Changed Item No. from RI.I I to RI. 12 and added note: VT-2 each refueling outage.
l 1448-WMKS-0127G2 1-APF 1O"-Sl-6-153 2 R-A RI.I I 2F y UT/PT Relief Request Revision Comments Circumferential Piping Weld. RBIS! NOTE: Perform UT/PT examination. New Segment HHl-001 with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
I 1448-WMKS-0127G2 1-AYF 8"-Sl-7-152 2 R-A RI.I I 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD. RBIS! NOTE: Perform UT/PT Segment HHl-002 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
l 1448-WMKS-0127G2 1-BNF 8"-CH-206-152 2 R-A RI.I I 2F y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment HHl-003 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-012711 1-02 6"-RC-17-1502 3 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment RC-041 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
l 1448-WMKS-0127Jl , .. 04 6"-RC-17-1502 R-A RI.II IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD 4 in. NPS & >, (WEPCB). RBIS! NOTE: Segment RC-041 Perfonn UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
I 1448-WMKS-0127JI 1-05 6"-RC-17-1502 2 R-A Rl.11 IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment ECC-001 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
I 1448-WMKS-0127JI 1-09 2"-Sl-74-1502 2 R-A RI.I I IA y UT(!)
Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform UT examination. New with Segment ECC-001 Rev. I to the RBIS! plan: Changed PT examination to UT examination.
11448-WMKS-012712 1-02 6"-RC-19-1502 3 R-A RI.I I IA y UT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 4 NPS in. & >. RBIS! NOTE: Segment RC-042 Perform UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
- --------
IUIISI Plan Sorted by Drawing and l\lark No., SPSU13 Database Page 13 of 18 Print Date: 7129198
Dra"ing No.
- !\lark No.
1-04 Line Nwnber 6"-RC-19-1502 Period 3
Category R-A Item No.
RI.I I ISi Oass IA Credit y
Method ITT/PT
- 11448-WMKS-012712 Relief Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. Weld added with Segment RC-042 Rev. I to plan, and replaces weld 1-03 on line 8"-RC-l l-2501R. RBIS! NOTE:
Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WI\IKS-012712 1-05 6"-RC-19-1502 2 R-A RI.II IA y ITT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 4 NPS in. & >. RBIS! NOTE: Segment ECC-002 Perform UT/PT examination. New with Rev. I to the RBIS I plan: added note: (PT augmented by subpanel).
11448-WMKS-012712 1-06 6"-RC-19-1502 2 R-A RI.II IA y ITT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 4 NPS in. & >. RBIS! NOTE: Segment ECC-002 Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
l 1448-WMKS-012713 1-02 6"-RC-20-1502 3 R-A RI.II IA y ITT/PT Reller Request Re,*lslon Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). NPS 4 in. & >. RBIS! NOTE: Segment RC-043 Perform ITT/PT examination. New with Rev. l to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-O 127J3 1-03 6"-RC-20-1502 2 R-A RI.I I IA y ITT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). Terminal End. This weld added Segment RC-043 to plan with Rev. I and replaces weld 1-04 on line 6"-RC-20-1502, 11448-WMKS-012713. RBIS! NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WI\IKS-012713 1-04 6"-RC-20-1502 2 R-A Rl.11 IA y lIT/PT Relief Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). This weld removed with Rev. Segment ECC-003 to plan, and was replaced with weld 1-03 on line 6"-RC-20-1502, 11448-WMKS-012713. RBIS! NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-012713 1-10 2"-Sl-75-1502 2 R-A Rl.11 IA y ITT (I)
Relief Request Revision Comments SOCKET WELD, (WEPSOK). RBIS! NOTE: Perform ITT examination. New with Segment ECC-003 Rev. I to the RBIS! plan: Changed PT examination to ITT examination.
I 1448-WMKS-012713
- ---------------------------
2-01 6"-SI-153-1502 3 R-A RI.I I 2A y ITT/PT Reller Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB). 3/8 in> & > Nominal Wall Segment LHI-010 Thickness. RBIS! NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
l 1448-WMKS-1022AIO 1001 2'1,"-CC-205-151 R-A Rl.12 38 y ITT/MT/Vf-2 Reller Request Revision Comments RBIS! Note: Perform ITT/PT or ITT/MT examination on weld nearest to reactor Segment CC-033 shroud cooling cools on line 2Y2"-CC-205-15 l. Note there is no mark/weld number I 00 I, this is used to sort the ISi database only. New with Rev. I to the RBIS) plan:
added note: (ITT/MT augmented by subpanel), changed Item No. from RI. I I to Rl.12, and added note to perform Vf-2 examination each refueling outage.
- - - - - - - - - - * - - - - - - - - - - - - - - - - - - - - - * * - - * - * * ----*-**--*----------- .. *-
RRISI Plan Sorted by Drawing and Mark No., SPSU13 Database Page 14 of 18 Print Date: 7129198
Dra"ing No. !\lark No. Line Number Period Category Item No. ISi Class Credit
- Method
- - - - - - -
l 1448-WMKS-1022A2 1001 3"-CC-98-151 R-A Rl.12 38 y ITT/MT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform ITT/PT or ITT/MT on the !st weld from pump 1-RC-P-IA on Segment CC-025 line 3"-CC-98-151. Note there is no mark/weld number 100 I, this is used to sort the
!SI database only. New with Rev. I to the RBIS! plan: added note: (UT/MT augmented by subpanel), changed Item No. from RI.I! to Rl.12, and added note to perform VT-2 examination each refueling outage.
11448-WMKS-1022A2 1002 I \/2"-CC-97-151 R-A Rl.12 3B y PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on the !st weld from pump 1-RC-P-1 A on line Segment CC-025 l 'h"-CC-97-151. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. l to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage.
I 1448-WMKS-1022A.5 1001 1"-CC-95-151 R-A Rl.12 38 y PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on the !st weld from pump 1-RC-P-IB on line Segment CC-030 1"-CC-95-15 l. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage.
11448-WMKS-1022A7 1001 3"-CC-91-151 R-A Rl.12 3B y ITT/MT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform ITT/PT or ITT/MT on the weld on 3" side of3"x2W' reducer on Segment CC-030 line 3"-CC-91-151. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (UT/MT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage.
11448-WMKS- I 022A9 1001 l"-CC-84-151 R-A Rl.12 3B y PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on weld at tee from line l "-CC-84-15 I to Segment CC-033 branch line goint to valve l-CC-RV-115C .. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from RI.I I to Rl.12, and added note to perform VT-2 examination each refueling outage.
11448-WMKS-1022A9 1002 I "-CC-84-151 R-A Rl.12 y 3B PT/Vf-2 Relief Request Revision Comments RBIS! Note: Perform PT examination on weld at tee on line l "-CC-84-151 to branch Segment CC-033 line goint to valve 1-CC-RV-115C. The weld to examine will be on the valve (l-CC-
- 76) side of the tee. Note there is no mark/weld number I 002, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage.
RBIS! Plan Sorted by Drnuing and Mark No., SPSUlJ Database Page 15 of 18 Print Date: 7/29/98
- Period Category Item No. ISi Oass Credit Method
- Dra"ing No. !\lark No. Line Nwnber 1"-CC-84-151 R-A Rl.12 38 y PT/VT-2 I 1448-\V~IKS-1022A9 1003 Relief Request Revision Conunents RBIS! Note: Perform PT examination on weld at tee on line I "-CC-84-151 to branch Segment CC-033 line goint to valve I-CC-RV-I 15C. The weld to examine will be on the pump (l-RC-P-1 C) side of the tee. Note there is no mark/weld number I 003, this is used to sort the ISi database only. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel), changed Item No. from Rl. I I to Rl. 12, and added note to perform VT-2 examination each refueling outage.
11448-WMKS-I IOIA3 0-03 12"-CS-1-153 2 R-A RI.I I 2A y lIT/PT Relief Request Revision Conunents Circumferential Piping Weld, (WEPCB) 3/8 in. & > nominal wall thickness. RBIS! Segment CS-002 NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-I IOIA5 1-03 12"-RS-8-153 R-A Rl.16 2A y lIT Relief Request Revision 0 Conunents CIRCUMFERENTIAL PIPING WELD, (WEPCB). 3/8 in. & > Nominal Wall Segment RS-003A Thickness. RBIS! NOTE: Perform lIT examination.
11448-WMKS-I IOI A5 1-06 12"-RS-7-153 3 R-A Rl.16 2A y lIT Relief Request Revision 0 Conunents CIRCUMFERENTIAL PIPING WELD, (WEPCB). 3/8 in. & > Nominal Wall Segment RS-004A Thickness. RBIS! NOTE: Perform ITT examination.
11448-WMKS-110585 1-06 3"-CH-69-1503 2 R-A RI.II 2A y lIT/PT Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHl-004C NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-l 105BS 2-AM-A 3"-CH-2-1503 2 R-A Rl.1 I 2A y Uf/PT Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHI-005C NOTE: Perform ITT/PT examination. New with Rev. 1 to the RBISI plan: added note: (PT augmented by subpanel).
11448-WMKS-110585 2-AP 3"-CH-2-1503 2 R-A Rl.12 2A y lIT/PT/VT-2 Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBISI Segment HHl-005A NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (ITT/MT augmented by subpanel), changed Item No. from Rl.11 to Rl.12, and added note to perform VT-2 examination each refueling outage.
11448-WMKS-l 10585 2-AS 3"-CH-3-1503 2 R-A Rl.1 I 2A y Uf/PT Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. This Segment HHI-006C weld added to plan with Rev. 2 to plan to replace weld 2-AW, which was preserviced during the 1994 refueling outage. RBISI NOTE: Perform UT/PT examination.
New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-110585 2-AZ 3"-CH-3-1503 2 R-A Rl.12 2A y lIT/PT/VT-2 Relief Request Revision Conunents Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHl-006A NOTE: Perform ITT/PT examination. New with Rev. I to the RBIS! plan: added note: (lIT/MT augmented by subpanel), changed Item No. from RI.I I to Rl.12, and added note to perform VT-2 examination each refueling outage.
*----- --------------------------- -------------------------
RBIS( Plan Sorted by Drawing and Mark No., SPSU13 Database Page 16 of 18 Print Date: 7129/98
- =-=:.-=:=-_--- *:c Dra\\ing No.
-====================:==:========::===::;'======;;:~==~~==~~=
Mark No. Line Number Period Category Item No. ISi Oass Credit Method
- 2-N 3"-CH-2-1503 3 R-A R!.11 2A y UT/PT 11448-WI\IKS-1105B5 Rellef Request Revision Comments Circumferential Piping Weld (WEPCB) > 0.200 in. nominal wall thickness. RBIS! Segment HHI-008 NOTE: Perform UT/PT examination. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-1105B9 1;BcF 4"-CH-89-1503 3 R-A Rl.11 2A y UT/PT Reller Request Revision Comments Circumferential Piping Weld (WEPCB). > 0.200 in. nominal wall thickness. RBIS! Segment HHl-009 NOTE: Perform UT/PT examination. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-1106A4 1-14 3"-Sl-70-1503 3 R-A Rl.16 2A y UT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. Nominal Wall Thickness. Segment HHl-012A RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan:
added note: (PT augmented by subpanel), and changed Item No. from RI.I I to Rl.16.
11448-WMKS-1106A4 3-47 2"-SI-71-1503 3 R-A Rl.16 2A y UT(!)
Reller Request Revision Comments Socket Weld, (WEPSOK). RBIS! NOTE: Perform PT examination. New with Rev. Segment HHI-012A I to the RBIS! plan: PT examination to UT examination, and changed Item No. from Rl.11 to RI 16.
11448-WMKS-1106A4 5-AF 3"-Sl-70-1503 3 R-A Rl.11 2A y UT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. Nominal Wall Thickness. Segment HHI-011 RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan:
added note: (PT augmented by subpanel).
11448-WMKS-1106A7 1-13 12"-Sl-1-153 3 R-A Rl.11 2A y UT/PT Reller Request Revision Comments CIRCUJ\,IFERENTIAL PIPING WELD, (WEPCB) 3/8 in. & > nominal wall Segment LHI-004 thickness. RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-1106A7 1-15 12"-Sl-2-153 3 R-A Rl.I I 2A y UT/PT Reller Request Revision Comments CIRCUl\ffERENTIAL PIPING WELD, (WEPCB) 3/8 in. & > nominal wall Segment LHI-003 thickness. RBIS! NOTE: Perform UT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-1106A7 2-18 12"-Sl-5-153 2 R-A Rl.16 2A y UT/PT Rellef Request Revision Comments Circumferential Piping Weld, (WEPCB) 3/8 in. & > nominal wall thickness. RBIS! Segment ECC-000 NOTE: Perform UT/PT examination. New with Rev. 1 to the RBIS! plan: added note: (PT augmented by subpanel), and changed Item No. from RI. I I to Rl.16.
11448-WMKS-1106A7 4-02 10"-Sl-105-153 2 R-A Rl.16 2F y UT/PT Reller Request Revision Comments CIRCUJ\,IFERENTIAL PIPING WELD, (WEPCB). RBIS! NOTE: Perform UT/PT Segment LHI-002 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
- -* -------- ------------------------- -- - - - - - --- -- - - - - - - - - - - - - - - - - - - - - - * - - - - - - - - - - - - - - - - - - - * ----------***
RBIS( Plan Sorted by Dra\\in~ and Mark No., SPSU13 Database Page /7of /8 Print Date: 7129198
-. *
- Drafting No. Mark No. Line Number Period Category Item No. ISi Oass Credit Method I 1448-W!'.1KS-I I06A7 6-04 IO"-SI-106-153 2 R-A Rl.16 2F y lIT/PT Reller Request Revision Comments CIRCUMFERENTIAL PIPING WELD, (WEPCB) RBIS! NOTE: Perform lIT/PT Segment LHI-001 examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-1106BI 0-25 3"-Sl-146-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in nominal wall thickness. RBIS! Segment HHl-013 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-1106B2 0-18 3"-SI-147-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential piping Weld, (WEPCB). > 0.200 in. nominal wall thickness. RBIS! Segment HHI-015 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
11448-WMKS-l 106B5 0-16 3"-SI-72-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. nominal wall thickness. RBIS! Segment HHI-017 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
I l448-WMKS-I I06B6 0-24 3"-SI-70-1503 3 R-A RI.I I 2A y lIT/PT Reller Request Revision Comments Circumferential Piping Weld, (WEPCB). > 0.200 in. nominal wall thickness. RBISI Segment HHl-010 NOTE: Perform lIT/PT examination. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
UFSAR-FIG-14B-16 IOOI 4"-SLPD-50-153 R-A Rl.11 NC y lIT/PT Reller Request Revision Comments RBIS! Note: Perform lIT/PT on the weld nearest to the charging power cable tray on Segment AS-I line 4"-SLPD-50-153, as shown on UFSAR Figure 14B-16. Note there is no mark/weld number 1001, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (PT augmented by subpanel).
UFSAR-FIG-14B-16 1002 6"-SA-21 R-A Rl.11 NC y lIT/MT Reller Request Re,*lslon Comments RBIS! Note: Perform lIT/PT or lIT/MT on the weld nearest to the component Segment AS-2 cooling water pumps on line 6"-SA-21 (carbon steel), as shown on UFSAR Figure 14B-16. Note there is no mark/weld number 1002, this is used to sort the ISi database only. New with Rev. I to the RBIS! plan: added note: (MT augmented by subpanel).
Record Count: 147 RBIS! Plan Sorted by Drafting and Mark No., SPSU13 Database Page 18of 18 Print Date: 7129/98
ENCLOSURE 3 DIFFERENCES BETWEEN THE ASME SECTION XI AND THE RISK-BASED INSERVICE INSPECTION PLANS SURRY POWER STATION UNIT 1
-
Se~ment
-
- -*-----------
XI Item No. Mark No. Line Nwnber
- RB Method ACC-001 89.11 1-16 l 2"-Sl-45-1502 2 ITT/PT 0 ACC..()01 89.11 1-14 12"-Sl-45-1502 ITT/PT 0 ACC-001 89.11 1-13 12"-Sl-45-1502 ITT/PT 0 ACC-006 B9.ll 1-13 12"-Sl-46-1502 UT/PT 0
-
ACC-006 B9.ll 1-14 l 2"-Sl-46-1502 UT/PT 0
*
ACC-006 B9.ll 1-19 12"-SI-46-1502 3 UT/PT 0
ACC-011 B9.ll 1-08 12"-Sl-47-1502 UT/PT 0
- ---------- *---
ACC-011 B9.ll 1-12 l2"-Sl-47-1502 2 UT/PT 0 ACC-011 89.11 1-09 l 2"-SI-47-1502 UT/PT 0 AFW-004 NA 1-FW-142 6"-W APD-3-601 0 Rl.13 UT Thickness AFW-005 NA 1-FW-157 4"-W APD-5-601 0 Rl.13 2 ITT Thickness AFW-006 NA l-FW-172 4"-WAPD-7-601 0 Rl.13 3 UT Thickness AFW-014 C5.51 0-35 6"-WAPD-1-601 ITT/MT 0 AFW..()15 C5.5I 0-13 6"-W APD-2-60 I 2 ITT/MT Rl.18 2 UT/MT
-**-- - - - - - * - - **-------
AFW-016 CS.51 0-34 6"-WAPD-1-601
UT/MT 0
*--------*-------
RBISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page I of 40 Print Date: 7/29/98
'
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method
-
- ----
- *-
AFW-016 C5.51 0-27 6"-WAPD-51-601 2 lIT/MT 0 AFW-016 NA l-MOV-FW-!51F 3"-WAPD-10-601 0 Rl.18 UT/MT
AFW-017 NA l-MOV-FW-!51F 3"-WAPD-10-601 0 Rl.18 UT/MT AFW-018 NA l-FW-58 3"-W APD-11-601 0 Rl.18 UT/PT AFW-019 NA l-FW-MOV-1518 3"-WAPD-14-601 0 Rl.18 UT/PT
AFW-028 C5.51 0-13 6"-WAPD-50-601 3 UT/MT 0
AFW-028 C5.51 0-14 6"-W APD-50-60 I 3 UT/MT 0
AFW-30 NA AFW Lube Oil Cool Piping For P-2 0 Rl.13 UT-Thickness AFW-31 NA AFW Lube Oil Cool Piping For P-3 A 0 Rl.13 2 UT-Thickness AFW-32 NA AFW Lube Oil Cool Piping For P-3B 0 Rl.13 3 UT-Thickness AS-I NA 1001 4"-SLPD-50-153 0 Rl.11 UT/PT
AS-2 NA 1002 6"-SA-21 0 Rl.11 UT/MT BD-002B NA 1001 3"-WGCB-1-601 0 Rl.18 UT/MT BD-003 NA 1002 3"-WGCB-105-601 0 Rl.18 UT/MT
BD-005B NA 1001 3"-WGCB-2-601 0 Rl.18 UT/MT
*------
RlllSI Plan and AS1\IE XI Sorted by RBISI Segments, SPSU13 Database Page 2of 40 Print Date: 7/29198
- * *
'
-
--
-
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method
BD-006 NA 1002 3"-WGCB-106-601 0 Rl.18 UT/MT BD-008B NA 1001 3"-WGCB-3-601 0 Rl.18 UT/MT BD-009 NA 1002 3"-WGCB-107-601 0 Rl.18 UT CC-025 NA 1002 lVi"-CC-97-151 0 Rl.12 PTNT-2 CC-025 NA 1001 3"-CC-98-151 0 Rl.12 UT/MTNT-2 CC-030 NA 1001 3"-CC-91-151 0 Rl.12 UT/MTNT-2 CC-030 NA 1001 1"-CC-95-151 0 Rl.12 PTNT-2
CC-033 NA 1001 2W'-CC-205-151 0 Rl.12 UT/MTNT-2 CC-033 NA 1001 l"-CC-84-151 0 Rl.12 PTNT-2 CC-033 NA 1002 1"-CC-84-151 0 Rl.12 PTNT-2 CC-033 NA 1003 1"-CC-84-151 0 Rl.12 PTNT-2 CC-28A NA 1001 2'/z"-CC-88-151 0 Rl.12 VT-2/lIT/MT CC-28A NA 1002 1Vi"-CC-803-1501 0 Rl.12 VT-2/PT CC-28B NA 1001 3"-CC-820-1501 0 Rl.11 UT/MT CC-29 NA 1001 3"-CC-820-1501 0 Rl.11 UT/MT
*
RBIS! Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 3 of 40 Print Date: 7129/98
- -------- -
Sei:ment
- - - - - - - -
XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method Cll-005 NA 1001 3"-CH-99-152 0 RI.I I lJf (I)
Cll-008 89.40 1-02 (PSI) I Yi"-CH-97-1502 2 PT 0 Cll-008 89.40 1-01 (PSI) !Yi"-CH-97-1502 2 PT Rl.12 0 Cll-008 89.40 1-01 1'h-CH-97-1502 2 PT Rl.12 2 PT/VT-2 CH-008 89.40 1-06 1'h"-CH-97-1502 PT 0
---*
Cll-008 89.40 1-01 1'h-CH-97-1502 2 PT Rl.12 0 Cll-008 B9.40 1-03 I V,"-CH-97-1502 0 PT Rl.12 2 PT/VT-2 Cll-008 B9.40 1-07 lW'-CH-97-1502 0 PT R1-12 2 PT/VT-2 Cll-009 B9.40 1-04 I Yi"-CH-95-1502 2 PT Rl.12 2 PT/VT-2
Cll-009 B9.40 1-01 I Yi"-CH-95-1502 2 PT Rl.12 2 PT/VT-2
Cll-009 B9.40 1-03 I W'-CH-95-1502 0 PT Rl.12 2 PT/VT-2
* ------------
CH-009 89.40 1-06 I Yi"-CH-95-1502 2 PT 0
Cll-010 89.40 1-01 I Yi"-CH-93-1502 2 PT Rl.12 2 PT/VT-2 Cll-010 B9.40 1-03 I Yi"-CH-93-1502 0 PT Rl.12 PT/VT-2
- ------
Cl!-0 I 0 B9.40 1-04 I Yi"-CH-93-1502
- - - - - - -
3 PT Rl.12 3 PT/VT-2
*-
RBISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 4 of 40 Print Date: 7/29198
Segment
- -------- --- ------------
XI Item No. l\lark No. Line Number XI Period XI Method RB Item No. RB Period
*-------- 2 PT 0 Cll-0 I 0 B9.40 1-09 2"-CH-93-1502
- 1l/z-CH-93-1502 2 PT 0 Cll-0 IO B9.40 1-02 Cll-011 B9.40 1-18 2"-CH-97-1502 PT 0
0 PT Rl.12 PT/VT-2 Cll-011 B9.40 1-19 2"-CH-97-1502
- ------------ - - -
Cll-011 B9.40 1-17 2"-CH-97-1502 PT 0 Cll-012 B9.40 1-21 2"-CH-95-1502 2 PT 0
Cl!-012 89.40 1-23 '2"-CH-95-1502 0 PT Rl.12 PT/VT-2 CH-012 B9.40 1-16 2"-CH-95-1502 2 PT 0 Cl!-013 B9.40 1-14 2"-CH-93-1502 0 PT Rl.12 3 PT/VT-2 Cll-013 B9.40 1-17. 2"-CH-93-1502 2 PT 0 Cll-013 B9.40 1-21 2"-CH-93-1502 2 PT 0 Cll-013 B9.40 1-13 2"-CH-93-1502 2 PT 0 Cll--0 - - - - - - - - - ____8_9_.4_0_____________ 1--3-8_ _ _ _ _ _ _ __
2"-CH-8-1503 PT 0
*------- * - - - - - - - - - - - - * - - - - -
Cll-016 B9.40 0-01 '2"-CH-8-1503 PT 0
- -- - - --- ---- ---- - ----------- ---
RBISI Plan and ASI\IE XI Sorted hy RBIS! Segments, SPSUl3 Database Page 5 of 40 Pnnt Date: 7/29/98
- ----
~--- --*-----
Segment XI Item No. Mark No. Line Nwnber XI Period XI Method RB Item No. RB Period RB Method Cll-016 B9.40 0-05 2"-CH-8-1503 PT 0
*
Cll-017 B9.40 1-33 2"-CH-8-1503 2 PT 0 Cll-017 B9.40 1-28 2"-CH-8-1503 2 PT 0
*
Cll-017 B9.40 1-24 2"-CH-8-1503 2 PT 0 Cll-017 B9.40 1-11 2"-CH-8-1503 PT 0
- -----*
Cll-017 B9.40 1-11 2"-CH-8-1503 PT 0 Cll-017 B9.40 1-07 2"-CH-8-1503 PT 0 CH-017 B9.40 1-19 2"-CH-10-1503 3 PT 0 Cll-017 B9.40 1-15 2"-CH-8-1503 PT 0
- -*-*----*-----------------------------------*-----------------------------------
Cll-017 B9.40 1-08 2"-CH-8-1503 PT 0 Cll-017 B9.40 1-03 2"-CH-8-1503 PT 0 Cil-017 B9.21 1-11 2"-CH-9-1502 3 PT 0
Cll-017 B9.21 1-09 2"-CH-9-1502 2 PT 0
---*-------
Cll-017 B9.40 1-10 2"-CH-10-1503 3 PT 0
-~----- - - - - - - - - -
Cll-017 B9.40 1-11 2"-CH-10-1503 3 PT 0 RIIISI Plan and ASl\lE XI Sorted by RBIS! Segments, SPSU13 Database Page 6 of 40 Print Date: 7129/98
- l\lark No. Line Number
- RB Method Segment XI Item No.
Cll-017 89.21 1-10 2"-CH-9-1502 2 PT 0 Cll-017 89.21 1-08 2"-CH-9-1502 PT 0
---*-*-------------- 0 Cil-017 89.40 1-15 2"-CH-10-1503 3 PT
*
CH-023 89.40 0-AX 2"-CH-68-1502 3 PT 0 Cll-023 89.40 0-AT 2"-CH-68-1502 3 PT 0
Cl!-023 89.40 1-17 2"-CH-68-1507. 3 PT 0 CH-023 B9.40 0-AP 2"-CH-68-1502 3 PT 0
**---
Cl!-023 89.40 0-AL 2"-CH-68-1502 3 PT 0
*
CS-001 CS.JI 0-07 12"-CS-2-153 3 UT/PT 0
CS-001 C5.IJ 0-08 l 2"-CS-2-153 3 UT/PT 0
---*--
CS-001 CS.II 0-05 12"-CS-2-153 2 UT/PT RI.I I 2 UT/PT
CS-002 CS.II 0-03 12"-CS-1-153 2 UT/PT RI.I I 2 UT/PT
CS-002 C5.Il 0-06 12"-CS-1-153 UT/PT 0
--*-----------
CS-002 CS.II 0-02 12"-CS-1-153
- ---------
2 UT/PT 0
*------------**
CS-003 CS.I I 0-09 12"-CS-2-153 UT/PT 0
*---
RHISI Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 7 of 40 Print Dare: 7129198
Se~ment cc-::.*==-=-=---:::*---------=---=------ =======
XI Item No. Mark No. Line Number
----------
CS-004 CS.II 1-04 8"-CS-33-!S3 3 0
CS-004 CS.I I 0-10 12"-CS-l-!S3 UT/PT 0 ECC-000 CS.II 2-18 l2"-S1-S-1S3 0 UT/PT Rl.16 2 UT/PT
ECC-000 CS.II 0-02 16"-S1-S-l S3 3 UT/PT 0
*-----
ECC-001 1-05 6"-RC-17-1502 0 UT/PT Rl.l l 2 lff/PT
-----
ECC-001 89.40 1-09 2"-Sl--74-1502 0 PT RI.I I 2 UT (l)
ECC-001 89.21 1-08 2"-Sl-74-1502 2 PT 0 ECC-002 89.11 1-05 6"-RC-19-1502 0 UT/PT Rl.11 2 UT/PT ECC-002 89.21 1-13 2"-Sl-85-1502 3 PT 0 ECC-002 8911 1-07 6"-RC-19-1502 UT/PT 0 ECC-002 89.11 1-06 6"-RC-19-1502 0 UT/PT Rl.11 2 UT/PT ECC-003 89.40 1-10 2"-Sl-75-1502 0 PT Rl.11 2 UT(!)
ECC-003 89.11 1-06 6"-SI-153-1502 UT/PT 0
-~----*---------
ECC-003 89.11 1-04 6"-RC-20-1502
- - - - ---------------
0 UT/PT RI.!! 2 UT/PT RlllSI Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page Bo[ 40 Print Date: 7/29198
Segment
- . *-----------
XI Item No. !\lark No. Line Number
- RB Method ECC-004 C5.30 1-05 2"-Sl-81-1502 2 PT 0 ECC-004 C5.I I 2-01 6"-Sl-50-1502 3 UT/PT 0 ECC-004 C5.ll 2-12 6"-Sl-50-1502 UT/PT 0 ECC-004 C5.30 0-02 2"-Sl-79-1502 2 PT 0 ECC-004 C5.41 7-0IBC 2"-Sl-81-1502 2 PT 0 ECC-004 C5.30 1-12 2"-Sl-81-1502 2 PT 0 ECC-004 C5.30 J *. 10 2"-SI-81-1502 3 PT 0 ECC-004 CS.II 2-05 6"-Sl-50-1502 3 UT/PT 0 ECC-004 C5.30 1-17 2"-Sl-80-1502 3 PT 0 ECC-004 C5.30 1-06 2"-Sl-81-1502 2 PT 0 ECC-004 C5.ll 3-12 6"-Sl-48-1502 2 UT/PT 0
- - - - - - - - - - - - - - - * * * -- - - -
ECC-004 C5.II 3-16 6"-SI-48-1502 2 UT/PT 0 ECC-004 C5.I I 4-19 6"-Sl-49-1502 3 UT/PT 0 ECC-004 *-------,----------------------------------------*---------*-----------
C5.41 6-0IBC 2"-Sl-80-1502 PT 0 ECC-004 C5.41
*-----------*--------
7-0IBC (PSI) 2"-Sl-81-1502 2 PT 0 RIIISI Plan and ASJ\IE XI Sorted by RBISI Segments, SPSU13 Database Page 9of 40 Print Date: 7!.?.9198
- *
~!:_m~~-~-:::*:*:::.c _____________ x_*1_1_1e No. --------c::===-;:l\;:la;r;:k,'.,N~o~.====:=L;in~e~N~um~b;.e~r====~X:::I:::P:::en~*=od===X=l~l\=l=e=th=o=d===R=B=I=te=m=N=o=,=====R=B=P=e=n=*o=d===R=B=M=e=th=o=d=
111 ECC-004 C5.30 7-02 2"-Sl-81-1502 2 PT 0 ECC-004 C5.30 1-11 2"-Sl-80-1502 2 PT 0 ECC-004 C5.30 1-14 2"-Sl-80-1502 3 PT 0 ECC-004 CS.II 2-07 6"-Sl-49-1502 lIT/PT 0 ECC-004 C5.30 0-15 2"-Sl-72-1503 PT 0
*
ECC-004 C5.21 3-PF 3"-Sl-72-1503 3 lIT/PT 0
ECC-004 C5.21 3-FF 3"-SI-72-1503 3 UT/PT 0
ECC-004 C5.30 2-24 2"-Sl-73-1503 PT 0 ECC-004 C5.30 2-23 2"-Sl-73-1503 2 PT 0 ECC-004 C5.30 2-22
-2"-Sl-73-1503
2
--- PT
- - - - - - - - - - - - - - - - - - - - - - - -
- ECC-004 C5.30 2-21 2"-Sl-73-1503 2 PT 0 ECC-004 C5.30 1-27 2"-Sl-77-1503 3 PT 0 ECC-004 C5.30 1-25 2"-Sl-77-1503 2 PT 0 ECC-004 CS.II 2-13 6"-Sl-50-1502 2 lIT/PT 0 ECC-004 C5.30 1-22 2"-Sl-77-1503 2 PT 0 RlllSI Plan and ASl\lE XI Sorted by RBISI Segments, SPSU13 Database Page JO of 40 Print Date: 7129198
Segment
ECC-004 C5.30 0-14 2"-Sl-72-1503 2 PT 0 ECC-004 C5.30 0-13 2"-Sl-72-1503 2 PT 0 ECC-004 C5.30 0-12 2"-Sl-72-1503 2 PT 0 ECC-004 C5.21 0-01 3"-Sl-72-1503 3 UT/PT 0 ECC-004 CS.21 0-21 3"-SI-147-1503 2 UT/PT 0
--*---------------*--------------------------------
ECC-004 CS.II 1-22 6"-Sl-50-1502 2 UT/PT 0 ECC-004 CS.41 7-0IBC 2"-Sl-81-1502 2 PT 0 ECC-004 CS.41 0-04 2"-Sl-79-1502 2 PT 0 ECC-004 CS.30 0-03 2"-Sl-79-1502 3 PT 0 ECC-004 C5.30 1-23 2"-SJ..77-1503 2 PT 0
**----------------------- -------
ECC-005 89.ll 1-09 6"-RC-16-1502 0 UT/PT RI.II 2 UT/PT ECC-005 89.ll 1-10 6"-RC-16-1502 0 UT/PT Rl.11 2 UT/PT
**-----
ECC-006 B9.ll 2-09 6"-Sl-48-1502 0 UT/PT RI.I I 2 UT/PT
---
ECC-006 B9.11 2-10 6"-Sl-48-1502 0 UT/PT RI.I I 2 UT/PT RBIS! Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 11 of 40 Prmt Date: ?129/98
Segment
- RB Method ECC-007 89.11 1-09 6"-RC-21-1502 0 lIT/PT RI.I I 2 lJf/PT
-*---------*----------*
ECC-007 89.11 1-10 6"-RC-21-1502 0 lIT/PT Rl.11 2 lJf/PT FW-001 NA 1001 14"-WCPD-37-301 0 Rl.18 2 lJf/MT FW-002 NA 1002 16"-WHPD-3-301 0 Rl.18 2 lIT/MT FW-003 NA 1003 18"-WCPD-33-301 0 RI.IS 2 lIT/MT
---*-----*-- -----------*---------*-----*----
FW-004 NA 1004 18"-WCPD-32-301 0 Rl.18 2 lJf/MT FW-005 NA 1001 14"-WCPD-71-301 0 Rl.18 2 lIT/MT
FW-006 NA 1001 18"-WFPD-1-901 0 Rl.18 2 lIT/MT FW-007 NA 1001 18"-WFPD-2-901 0 Rl.18 2 lIT/MT FW-015 C5.5l 1-19 14"-WFPD-17-601 2 lIT/MT 0
*
FW-015 C5.51 1-20 14"-WFPD-17-601 lIT/MT 0
FW-016 C5.51 1-17 14"-WFPD-9-601 3 lIT/MT 0
FW-016 C5.51 3-18 14"-WFPD-9-601 3 lIT/MT 0
*
FW-017 C5.51 2-14 14"-WFPD-13-601 2 lJf/MT 0
FW-017 C5.51 1-13 14"-WFPD-13-601 lIT/MT O
*------------------------*-***--*
RBISI Plan and ASI\1E XI Sorted by RBISI Segments, SPSU13 Database Page 12 of 40 Print Date: 7/29198
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method FW-018 C5.51 1-09A (PSI) 14"-WFPD-17-601 2 UT/MT 0 FW-018 C5.51 l-08A (PSI) 14"-WFPD-17-601 2 UT/MT 0 FW-018 C5.51 1-03 14"-WFPD-17-601 2 UT 0 FW-018 C5.51 1-18 14"-WFPD-17-601 2 UT/MT 0 FW-018 C5.51 1-03 14"-WFPD-17-601 2 UT 0
*------*-- ---***- -------*
FW-018 C5.51 1-02 14"-WFPD-17-601 2 ur 0 FW-018 C5.51 1-01 14"-WFPD-17-601 2 UT 0
*--*-------
FW-018 C5.51 l-07A (PSI) 14"-WFPD-17-601 2 UT/MT 0 FW-019 C5.51 1-02 14"-WFPD-9-601 2 UT 0 FW-019 C5.51 l-13A (PSI) 14"-WFPD-9-601 2 UT/MT 0 FW-019 C5.51 l-16A l 4"-WFPD-9-601 2 UT/MT 0 FW-019 C5.51 l-16A 14"-WFPD-9-601 3 UT/MT 0 FW-019 C5.51 l-15A(PSI) 14"-WFPD-9-601 2 UT/MT 0
-FW--0-1-9------*-------C-5.-5 - - - - - - - -
1-03 14"-WFPD-9-601 2 UT 0 FW--oi9 ________________c_s_-5_1____________
1-01 14"-WFPD-9-601 2 UT 0
- -*--* -*---- -------**** * * - - - * * - * - - - - -
RIIISI Plan and ASl\lE XI Sorted by RBISI Segments, S1'SU13 Database Page 13 of 40 Print Date: 7/29198
-- ---
Segment
- - -
- - - - - - - - - - - - *- - - - -
XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method
==
F\V-019 C5.51 l-12A (PSI) 14"-WFPD-9-601 lIT/MT 0
FW-020 C5.51 1-12 14"-WFPD-13-601 lIT/MT 0 FW-020 C5.51 1-03 14"-WFPD-13-601 2 lIT 0 FW-020 CS.SI 1-09A (PSI) 14"-WFPD-13-601 2 lIT/MT 0 FW-020 C5.51 1-IOA (PSI) 14"-WFPD-13-601 2 lIT/MT 0
--------- ------------------
FW-020 CS.SI 1-IIA (PSI) 14"-WFPD-13-601 2 lIT/MT 0
---------
FW-020 CS.SI 1-01 \6"-WFPD-13-601 2 ur 0 FW-020 C5.51 1-02 14"-WFPD-13-601 2 UT 0 HHI-001 CS.I I 1-APF I O"-Sl-6-153 0 PT RI.I I 2 lIT/PT Hill-002 CS.II 1-AYF 8"-SI-7-152 0 PT RI.I I 2 lIT/PT
Hill-003 CS.II 1-BNF 8"-CH-206-IS2 0 RI.II 2 lIT/PT III!l-004A CS.30 2-BB-A (PSI) 2"-CH-20-l S03 PT 0 Hill-004A C5.30 2-BC-A (PSI) 2"-CH-20-1 S03 PT 0 Hill-004A CS.30 2-BD-A 2"-CH-20-1503 PT 0 lllll-004A C5.30 2-DD-A (PSI) 2"-CH-20-IS03
PT 0
---- --------------------------.
RBISJ Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 14 of 40 Prine Date: 7129/98
- RB Method 111!1-004,\ C5.21 1-01 3"-CH-81-1503 3 UT/PT 0 IIIII-004A C5.30 2-BE-A (PSI) 2"-CH-20-1503 PT 0
- - - 0 HIII-004A C5.21 1-03 3"-CH-81-1503 3 UT/PT IIIII-004A C5.30 2-BD-A (PSI) 2"-CH-20-1503 PT 0
*** *------
I1HI-004C C5.21 1-ANF 3"-CH-69-1503 2 UT/PT 0 HHl-004C C5.21 1-06 3"-CH-69-1503 2 UT/PT Rl.11 2 UT/PT
- ---*---
IIHl-005A C5.4I 2-BP 3 "-CH-2-1503 PT 0 lllll-005A C5.21 2-AP 3"-CH-2-1503 0 UT/PT Rl.12 2 UT/PT/Vf-2 lllll-005A CS.21 2-AN-A (PSI) 3"-CH-2-1503 UT/PT 0 lllll-005C C5.21 2-AM-A 3"*-CH-2-1503 0 RI.I I 2 UT/PT IIIII-005C C5.21 2-AM-A (PSI) 3"-CH-2-1503 UT/PT 0 lllll-005C
*-----------
C5.21 2-AJ 3"-CH-2-1503 2 UT/PT 0 HIII-006A C5.21 2-AZ 3"-CH-3-1503 0 UT/PT Rl.12 2 UT/PT/VT-2 HIII-006A C5.21 2-AW-A (PSI) 3"-CH-3-1503 UT/PT 0 IIHl-006C C5.21 0-11 3"-CH-251-1502 UT/PT 0 RIIISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 15 of 40 Print Date: 7129198
Segment
- XI Item No.
- - - - - - - - - - - - - - ~ - - -
Mark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method lllll-006C C5.21 2-AS 3"-CH-3-1503 2 lIT/PT RI.I I 2 lIT/PT IIIll-006C C5.21 0-01 3"-CH-71-1503 3 lIT/PT 0 IIHI-006C C5.21 2-AV-A (PSI) 3"-CH-3-1503 lIT/PT 0 HIII-006C C5.21 0-12 3"-CH-251-1502 lIT/PT 0 HHI-007 C5.30 2-BY 2"-CH-21-1503 2 PT 0 Hlll-007 C5.21 0-1 3"-CH-113-1503 lIT/PT 0 HHl-007 C5.30 2-BL 2"-CH-20-1503 2 PT 0 11111-007 C5.30 2-CM 2"-CH-22-1503 3 PT 0 11111-0(}8 C5.21 0-10 3"-CH-11-1503 lIT/PT 0 Hlll-008 C5.21 0-10 3"-CH-79-1503 3 lIT/PT 0 Hlll-008 C5.21 0-05 3"-SI-57-1503 2 lIT/PT 0
HHl-008 C5.21 0-03 4"-CH-80-1503 2 lIT/PT 0 HIII-008 C5.21 0-09 3"-Sl-90-1503 3 lIT/PT 0 Hlll-008 C5.21 0-30 3"-Sl-70-1503 2 lIT/PT 0 HIII-008 C5.21 0-07 3"-Sl-57-1503 2 Uf/PT 0
*----**----
RBIS I Plan and ASME XI Sorted by RBISI Segments, SPSU13 Database Page 16 of 40 Print Date: 7129/98
- - --- ------ --
-------*
Sei:ment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method
11111-008 C5.21 0-11 2"-CH-11-1503 LIT/PT 0 11111-008 C5.21 0-23 3"-Sl-147-1503 2 lIT/PT 0 11111-008 C5.21 2-N 3"-CH-2-1503 0 lIT/PT RI.I I 3 lIT/PT Hlll-008 C5.21 2-T 3"-CH-2-1503 2 lIT/PT 0 IIIll-008 C5.21 0-09 4"-CH-80-1503 lIT/PT 0 HHl-009 C5.21 1-YF 3"-CH-70-1503 3 lIT/PT 0 11111-009 C5.21 I-RS 4"-CH-89-1503 3 lIT/PT 0 HHl-009 C5.21 1-BGS 2"-CH-8-1503 2 lIT/PT 0 HHl-009 C5.21 1-AAF 3"-CH-70-1503 3 lIT/PT 0
**
IIHl-009 C5.21 1-BFS 4"-CH-89-1503 3 lIT/PT 0 11111-009 C5.21 0-14 3"-Sl-72-1503 3 lIT/PT 0 IIHI-009 C5.21 1-BCF 4"-CH-89-1503 0 UT/PT RI.II 3 lIT/PT HIII-009 C5.21 0-03 3"-SI-72-1503 3 lIT/PT 0 11111-009 C5.21 0-07 3"-SI-146-1503 lIT/PT 0
11111-010 C5.21 0-25 3"-Sl-70-1503 2 lIT/PT
**
0
RBIS! Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 17of 40 Print Date: 7129/98
--- --- ----* --. ------- ---- ..
.
XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method Segment IIHI-010 C5.21 0-19 3"-Sl-70-1503 3 UT/PT 0 11111-010 C5.21 0-24 3"-Sl-70-1503 0 UT/PT Rl.11 3 UT/PT Hlll-011 C5.21 5-AF 3"-Sl-70-1503 0 UT/PT RI.I I 3 UT/PT HHI-012A C5.21 2-51BW 2"-Sl-76-1503 2 UT/PT 0 HHI-012A C5.30 2-35 2"-SI-76-1503 2 PT 0 HHI-012A C5.30 4-28 2"-Sl-70-1503 PT 0 Hlll-012A C5.30 2-40 2"-SI-76-1503 2 PT 0 IIHl-012A C5.30 3-48 2"-Sl-71-1503 2 PT 0 HHI-012A C5.30 4-30 2"-SI-70-1503 2 PT 0 lllll-012A C5.30 4-29 2"-SI-70-1503 2 PT 0 Hlll-012A C5.21 1-05 3"-SI-70-1503 3 UT/PT 0 HHl-012A C5.21 1-14 3"-SI-70-1503 0 UT/PT Rl.16 3 UT/PT HHI-012A C5.21 1-16 3"-Sl-70-1503 2 UT/PT 0 HHl-012A C5.30 3-47 2"-SI-71-1503 0 PT Rl.16 3 UT(!)
11111-0 l 2B C5.30 1-30 2"-SI-74-1502
2 PT 0
*
RBISI Plan and ASME XI Sorted by RBISI Segments, SPSU13 Database Page 18of 40 Print Date: 7129198
Segment
- - - ---------------
- - * - - - - - - ---*--------------
-*----
XI Item No.
-- --
--
Mark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method 11111-012B C5.30 1-35 2"-Sl-74-1502 2 PT 0 IIlll-012B C5.30 1-34 2"-Sl-74-1502 2 PT 0 lllll-012B C5.30 1-33 2"-Sl-74-1502 2 PT 0 11111-0 l2B C5.30 1-27 2"-Sl-74-1502 PT 0 HHl-012B C5.30 1-29 2"-Sl-74-1502 2 PT 0
IIHl-0128 C5.30 1-32 2"-Sl-74-1502 3 PT 0 HIII-012B C5.30 3-41 2"-Sl-74-1502 2 PT 0
- ----*
11111-0 l 2B C5.30 1-39 2"-Sl-74-1502 2 PT 0 IIHl-0128 C5.30 1-40 2"-SI-74-1502 2 PT 0 Hlll-012C C5.30 1-29 2"-Sl-85-1502 3 PT 0 Hlll-012C CS.30 1-28 2"-Sl-85-1502 3 PT 0 IIHl-012C C5.30 1-26 2"-SI-85-1502 PT 0
11111-0 l 2D C5.30 4-27 2"-Sl-75-1502 3 PT 0 HIII-012D C5.30 4-25 2"-Sl-75-1502 2 PT 0
11111-0 l 2D C5.30 1-22 2"-Sl-75-1502 PT 0
- ---------------
RIIISI Plan and ASJ\1E XI Sorted by RBISI Segments, SPSU13 Database Page 19of 40 Print Date: 7129198
Segment
- XI Item No. !\lark No. Line Number
- RB Method IIJIJ-0120 C5.30 4-26 2"-Sl-75-1502 2 PT 0 HHI-012D C5.30 1-24 2"-Sl-75-1502 PT 0 IIHI-013 C5.21 0-25 3"-SI-146-1503 0 UT/PT RI.I I 3 UT/PT Hlll-013 C5.21 0-08 3"-SI-146-1503 UT/PT 0 IIHl-013 C5.21 0-26 3"-Sl-146-1503 UT/PT 0 IIHI-014 C5.21 0-01 3"-Sl-146-1503 UT/PT 0 HIII-014 C5.21 0-02 3"-Sl-146-1503 UT/PT 0 HHI-015 C5.21 0-09 3"-SI-147-1503 UT/PT 0 HHl-015 C5.21 0-25 3"-Sl-147-1503 2 UT/PT 0 Hlll-015 C5.21 0-18 3"-Sl-147-1503 0 UT/PT RI.I I 3 UT/PT IIHl-015 C5.21 0-01 3"-SI-147-1503 UT/PT 0 III!I-016 C5.21 0-02 3"-SI-147-1503 2 UT/PT 0 lllll-016 C5.21 0-01 3"-Sl-147-1503 UT/PT 0 Hlll-017 C5.21 0-22 3"-SI-72-1503 3 UT/PT 0 Hlll-017 C5.21 0-16 3"-SI-72-1503 0 UT/PT RI.I I 3 UT/PT
- ---------*-*---- *-----------------~--*--
RBIS! Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 20of 40 Print Date: 7129/98
... --*- ~-----
- *-----
Segment XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period RB Method
- - ---------------
Ll!I-00 I C5.ll 1-18 12"-Sl-2-153 2 UT/PT 0 LHl-001 C5.ll 1-19 12"-Sl-2-153 3 UT/PT 0 Llll-001 C5.ll 6-04 IO"-Sl-106-153 0 Rl.16 2 UT/PT LHl-001 C5.12 0-32L I 2"-Sl-2-153 2 UT/PT 0 LHl-002 C5.ll 4-02 I O"-Sl-105-153 0 Rl.16 2 UT/PT
LHl-002 C5.II l-10 12"-Sl-1-153 UT/PT 0 LHl-002 C5.12 0-18L 12"-SI-1-153 UT/PT 0
LIII-003 C5.ll 1-15 12"-SI-2-153 3 UT/PT RI.I I 3 Uf/PT LIII-004 C5.ll 1-13 12"-Sl-1-153 0 UT/PT RI.I I 3 UT/PT Ll!I-007 C5.ll 3-AGF I O"-SI-148-153 2 UT/PT 0 LHl-007 C5.ll 1-V 8"-Sl-14-153 0 RI.II 3 UT/PT Llll-008 C5.ll 3-AAF IO"-Sl-151-153 3 UT/PT 0 LHI-008 C5.ll 3-BF I 0"-Sl-84-152 0 Rl.16 3 UT/PT LIII-009 C5.ll 3-JF I 0"-Sl-150-153 0 RI.I I 3 UT/PT
Llll-0!0 C5.ll 1-04 6"-Sl-153-1502 ------------
2 UT/PT 0
-- ------------ --
*---*------------
IUIISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 21 of 40 Print Date: 7129198
Segment
- -* -- ------
- --------
XI Item No. Mark No. Line Number
- RB Method Uil-010 C5.11 1-07 1O"-Sl-152-1502 2 UT/PT 0 Llll-010 C5.l 1 1-11 I O"-Sl-152-1502 UT/PT 0 LHI-010 C5.ll 2-03 6"-Sl-145-1502 UT/PT 0 Llll-010 C5.ll 2-12 6"-SI-145-1502 UT/PT 0 LIII-010 C5.11 2-01 6"-Sl-144-1502 UT/PT 0
- -------
LHl-010 C5.ll 2-01 6"-SI-153-1502 0 UT/PT Rl.I l 3 UT/PT LHl-010 C5.II 1-21 6"-SI-153-1502 3 UT/PT 0
*
Llll-010 C5.ll 1-26 6"-Sl-153-1502 3 UT/PT 0 LHl-010 C5.ll 1-29 6"-Sl-153-1502 2 UT/PT 0 Llll-010 C5.ll 2-13 6"-Sl-144-1502 UT/PT 0 Llll-010 C5.ll 3-35 6"-Sl-153-1502 2 UT/PT 0 LHl-010 C5.ll 2-01 6"-SI-145-1502 UT/PT 0
Ull-011 C5.ll 2-09 6"-SI-48-1502 2 UT/PT 0 LHl-012 C5.ll 2-0.5 6"-Sl-49-1502 3 UT/PT 0 LIII-012 C5.11 5-01 ----------
6"-Sl-49-1502 3 UT/PT 0
-- - ---------------
RBIS! Plan and ASI\IE XI Sor1ed by RBIS! Segments, SPSU13 Database Page 22of 40 Print Date: 7129/98
--
Segment
- XI Item No. !\lark No. Line Number
- RB Method Llll-018 C5.ll 1-AQF 6"-Sl-78-152 0 Rl.12 3 lIT/PT LHl-018 C5.ll 1-AKF 6"-Sl-19-152 0 Rl.12 3 Vf-2 LIII-018 C5.ll 1-ADF 6"-Sl-18-152 0 Rl.12 3 Vf-2 LHl-018 C5.ll 1-AUF 6"-Sl-78-152 0 Rl.12 3 Vf-2
MS-003 C5.51 1-1 32"-SHP-3-601 3 lIT/MT 0
- ------~---------------**
MS-004 C5.51 2-26 30"-SHP-1-601 lIT/MT 0
~IS-004 C5.52 0-3L 30"-SHP-1-601 UT/MT 0 MS-004 C5.51 2-11 30"-SHP-1-601 3 UT/MT 0 MS-004 C5.51 2-28 30"-SHP-1-60 I UT/MT 0 MS-004 C5.52 2-34L 30"-SHP-1-60 I lIT/MT 0 MS-005 C5.52 0-4L 30"-SHP-2-60 I 2 lIT/MT 0 MS-005 C5.51 4-25 30"-SHP-2-60 I 2 UT/MT 0 MS-005 C5.51 4-10 30"-SHP-2-60 I 2 lIT/MT 0 MS-005 C5.51 4-28 30"-SHP-2-60 I 2 lIT/MT 0
*
MS-006 C5.52 0-4L 30"-SHP-3-60 I --------
3 lIT/MT 0
*-------
RBIS! Plan and ASME XI Sorted by RBISI Segments, SPSU13 Database Page 23 of 40 Print Date: 7129198
Segment
_-_-
XI Item No.
___
Mark No. Line Nwnber XI Period XI Method RB Item No. RB Period
- RB Method
~IS-006 C5.51 3-07 30"-SHP-3-60 l 3 UT/MT 0
UT/MT
~IS-010 C5.51 1-02 6"-SHP-45-60 I 0 UT/MT Rl.18 3
~IS-011 C5.51 1-07A 6"-SHP-46-601 2 UT/MT 0 MS-012 C5.51 1-07 6"-SHP-47-60 I 3 UT/MT 0 MS-012 C5.51 1-04 6"-SHP-47-601 2 UT/MT 0 MS-019 C.5.81 1-21BC 30"-SHP-22-601 UT/MT 0 MS-019 C5.81 2-12BC 30"-SHP-22-601 2 UT/MT 0
~IS-019 C5.81 l-13BC 30"-SHP-22-60 I UT/MT 0 MS-020 C5.81 4-IIBC 30"-SHP-23-601 2 UT/MT 0 MS-020 C5.81 2-12BC 30"-SHP-23-601 3 UT/MT 0 MS-020 C5.52 0-IL 30"-SHP-23-601 2 UT/MT 0 MS-021 C5.51 3-10 30"-SHP-24-601 3 UT/MT 0
MS-021 C5.81 3-09BC 30"-SHP-24-601 3 UT/MT 0 MS-021 C5.81 3-08BC 30"-SHP-24-601 2 UT/MT 0 MS-032 NA 100] 3"-SHP-57-601 0 Rl.18 UT/MT
--*-
**--------*----------
RBI SI Plan and ASI\IE XI Soned by RBISI Segments, SPSU13 Database Page 24 of 40 Print Date: 7129198
***. ~---.-------..-** .... ---**
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method 1002 3"-SHP-57-601 0 Rl.18 UT/MT J\!S-033 NA J\IS-034 1003 3"-SHP-57-60 I 0 Rl.18 Vf-2 NA RC-001 B5.IO 1-0IDM 29"-RC-!-2501R UT Auto Rl.11 UT Auto RC-001 B9.I I 1-02 29"-RC-1-250 IR 3 UT/PT 0 RC-002 B5.IO 1-0IDM 29"-RC-4-250 IR UT Auto Rl.11 UT Auto
UT Auto RC-003 B5.IO 1-0IDM 29"-RC-7-250 IR UT Auto Rl.11
RC-003 B9.II 1-02 29"-RC-7-250 IR 3 UT/PT 0 RC-004 B5.70 I-05DM 29"-RC-!-2501R UT/PT 0 RC-005 B5.70 1-050!1.! 29"-RC-4-250 IR 2 UT/PT Rl.11 2 UT RC-006 B5.70 1-05DM 29"-RC-7-250 IR 3 UT/PT 0 RC-007 B5.70 1-06DM 3 I "-RC-2-250 IR UT/PT 0 RC-007 B9.12 1-21 3 l "-RC-2-250 IR 3 UT/PT 0 RC-007 B9.II 1-11 31 "-RC-2-250 IR 3 UT/PT 0 RC-007 B9.12 1-20 31 "-RC-2-250 IR 3 UT/PT 0
- ------- *------------------
RC-008 B5.70 l-06DM 3 l "-RC-5-250 IR 2 UT/PT RI.I I 2 UT
- ----*--------
RBISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 25 of 40 Print Date: 7129/98
Se~ment
-
- - - - - - -
XI Item No.
- - - - - - - - - - - - - -
!\lark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method RC-008 B9.12 1-21 3 I "-RC-5-250 IR 2 UT/PT 0
RC-008 B9.12 1-20 3 I "-RC-5-2501R 2 UT/PT 0 RC-008 B9.II 1-11 31"-RC-5-2501 R 2 UT/PT 0 RC-009 B9.ll 1-11 31 "-RC-8-250 IR UT/PT 0 RC-009 B9.12 1-20 31 "-RC-8-250 IR UT/PT 0
RC-009 B9.12 1-21 31 "-RC-8-250 IR ITT/PT 0 RC-009 B5.70 l-06DM 3 I "-RC-8-250 IR 3 UT/PT 0 RC-010 B9.II 1-12 27 1/,"-RC-3-250 JR 3 UT/PT 0 RC-010 B9.32 3-0IBC 1'h"-RC-125-1502 3 PT 0 RC-011 B9.32 3-0IBC I Y,"-RC-60-1502 3 PT 0 RC-011 B9.II 1-12 27'1,-RC-6-2501 R 2 UT/PT 0 RC-012 B9.32 3-0IBC I 'h"-RC-141-1502 3 PT 0 RC-012 B9.ll 1-12 27'1,-RC-9-2501 R UT/PT 0 RC-013 B5.IO l-17DM 27'1,-RC-3-2501R 3 UT Auto RI.I I 3 UT Auto RC-014 B5.IO 1-17DM 27'1,-RC-6-250 IR
---*---------------
Rll!SI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 26 of 40 Print Date: 7129/98
Segment
- XI Item No. !\lark No. Line Number
- XI Period XI Method RB Item No. RB Period RB Method RC-015 B.5.10 1-17Dl\.1 27'1,"-RC-9-250 IR 3 lJf Auto RI.I I 3 lJf Auto RC-016 89.11 1-08 6"-RC-16-1502 lJf/PT RI.I I lJf/PT RC-016 89.31 1-0IBC 6"-RC-16-1502 2 lJf/PT 0 RC-016 89.11 1-02 6"-RC-16-1502 0 lJf/PT RI.I I 3 lJf/PT RC-017 89.11 2-08 6"-RC-18-1502 3 lJf/PT RI.I I 3 lJTIPT
*
RC-017 89.31 :2-0IBC 6"-RC-18-1502 2 lJf/PT 0 RC-017 89.11 2-06 6"-RC-18-1502 lJf/PT 0
RC-017 89.11 2-03 6"-RC-18-1502 0 lJf/PT Rl.11 3 UT/PT RC-018 89.11 1-08 6"-RC..21-1502 2 lJf/PT RI.II 2 lJf/PT RC-018 89.31 1-0IBC 6"-RC-21-1502 lJf/PT 0 RC-018 89.11 1-02 6"-RC-21-1502 lJf/PT 0 RC-018 89.11 1-05 6"-RC-21-1502 0 lJf/PT RI.I I 3 lJf/PT RC-019 89.11 1-07 12"-RC-I0-2501R 2 UT/PT 0 RC-019 89.11 1-02 12"-RC-I0-2501R lJf/PT 0
*-*
RC-019 85.40 1-0IDM 12"-RC-10-2501R 3 lJf/PT
0
-- -----*------
- - - - - - - - - - - - - - - - - - -- - - - - -
RIIISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 27 of 40 Print Date: 7129198
- .:-:=:*_----==-~==:::****-=*==========
Segment
==-===----::_-_-_-_-_-_
XI Item No. Mark No. Line Nwnber
--=~~~~=========~~~~============================================~
XI Period XI Method RB Item No. RB Period
- RB Method RC-019 89.31 l-098C 12"-RC-I0-2501R 3 UT/PT 0 RC-020 89.31 1-0IBC 14"-RH-1-1502 UT/PT 0 RC-020 89.11 1-05 14"-RH-1-1502 UT/PT 0 RC-021 89.11 1-04 8"-RC-l l-2501R 3 UT/PT 0 RC-022 89.11 1-03 8"-RC-12-250 IR 3 UT/PT 0 RC-022 89.11 1-04 8"-RC-12-250 IR 3 UT/PT 0 RC-023 89.11 1-04 8"-RC-13-250IR 3 Uf/PT 0
RC-024 B9.40 1-14 2"-RC-45-1502 3 PT 0 RC-024 89.32 l-178C 2"-RC-45-1502 2 PT 0 RC-024 89.32 1-0IBC 2"-RC-45-1502 2 PT 0 RC-024 89.40 1-10 2"-RC-45-1502 3 PT 0 RC-024 89.40 1-06 2"-RC-45-1502 3 PT 0 RC-025 89.32 l-178C 2"-RC-46-1502 3 PT 0 RC-025 89.32 l-018C 2"-RC-46-1502 2 PT 0 RC-025 89.40 1-04 2"-RC-46-1502 3 PT
0 RBISJ Plan end ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 28of 40 Print Date: 7129198
- - --** .
Segment
--- ----
XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period
RC-025 89.40 1-12 2"-RC-46-1502 3 PT 0 RC-026 89.32 l-178C 2"-RC-44-1502 2 PT 0 RC-026 89.40 1-15 2"-RC-44-1502 3 PT 0 RC-026 89.40 1-11 2"-RC-44-1502 3 PT 0 RC-026 89.32 1-0IBC 2"-RC-44-1502 2 PT 0
RC-027 89.40 1-03A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 l-07A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 l-04A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 1-05A (PSI) 2"-RC-53-1502 PT 0 RC-027 89.40 1-07A 2"-RC-53-1502 PT Rl.12 VT-2/PT RC-027 89.32 1-0IBC 2"-RC-53-1502 PT 0 RC-027 89.40 l-06A(PSI) 2"-RC-53-1502 PT 0 RC-028 89.32 1-0IBC 2"-RC-57-1502 PT Rl.12 PT/VT-2
RC-029 89.40 1-03 2"-RC-58-1502 2 PT 0
---------
RllISI Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 29of 40 Print Date: 7/29198
-- ----**** -* - -- -- --- - -------**** -***
Segment
- ---
- - - -----*---
- - - ----------
XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method RC-029 89.32 1-0IBC 2"-RC-58-1502 PT 0 RC-029 89.40 1-06 2"-RC-58-1502 2 PT 0 RC-029 89.40 1-09 2"-RC-58-1502 2 PT Rl.12 2 PT/VT2 RC-030 89.40 1-37 2"-RC-56-1502 2 PT 0 RC-030 89.40 1-16 2"-RC-58-1502 2 PT 0 RC-030 89.40 1-39 2"-RC-59-1502 3 PT 0 RC-030 89.40 1-17 2"-RC-58-1502 2 PT 0 RC-030 89.40 1-45 2"-RC-53-1502 PT 0 RC-030 89.40 1-11 2"-RC-53-1502 PT 0 RC-030 89.40 l-08A (PSI) 2"-RC-53-1502 PT 0 RC-030 89.40 1-19 2"-RC-53-1502 PT 0 RC-030 89.40 1-12 2"-RC-57-1502 2 PT 0 RC-030 89.40 1-15 2"-RC-53-1502
PT 0 RC-030 89.40 1-23 2"-RC-53-1502 PT 0 RC-030 89.40 1-32 -----~-----
2"-RC-55-1502 PT 0
---*-*-------
RIIISI Plan and ASI\IE XI Sorted by RBIS! Segments, SPSU13 Database Page 30of 40 Print Date: 7129198
~-.::-_:_:.:.._.=-:::_-_-_-..:-::.=.::*.::_: -----------**-----*- ==========
- RB l\fethod
_Se:~~~~---..-:::.-:--..=.:*:~~-=-----x-:I_I_te_m No.=========l\~l~a~rk~N~o~-====~L~ln~e~N=um~b~er=======e=o====e=o=====e=m==o*================
RC-030 139 .40 1-16 2"-RC-53-1502 PT 0
*
RC-030 139.40 1-26 2"-RC-53-1502 PT 0 RC-030 89.40 1-41 2"-RC-57-1502 2 PT 0 RC-030 89.40 1-49 2"-RC-53-1502 PT 0 RC-030 89.40 1-01 2"-RC-53-1502 PT 0
- -*--
RC-030 89.40 1-08 2"-RC-53-1502 PT 0
RC-030 89.40 1-11 2"-RC-53-1502 PT 0
RC-030 89.40 1-17 2"-RC-57-1502 2 PT 0 RC-031 89.32 1-18BC 2"-RC-55-1502 PT 0 RC-031 89.40 1-25 2"-RC-55-1502 PT 0 RC-031 89.40 1-22 2"-RC-55-1502 PT 0 RC-032 89.40 1-33 2"-RC-56-1502 2 PT 0 RC-032 89.32 1-22BC 2"-RC-56-1502 PT 0 RC-032 89.40 1-23 2"-RC-56-1502 2 PT 0 RC-032 *-------*-------
89.40 1-25 2"-RC-56-1502 2 PT 0
- -----*----* *------- ---------
RBISI Plan and ASl\lE XI Sorted by RBISI Segments, SPSU13 Database Page 31 of 40 Print Date: 7129198
. ***-*-------* *- *****-**- -
- * *
'
- - ~ - - --
Segment XI Item No. Mark No. Line Number XI Period XI Method RB Item No. RB Period RB Method
- --
- --
- ------------
RC-033 B9.40 1-22 2"-RC-59-1502 2 PT 0 RC-033 B9.40 1-25 2"-RC-59-1502 2 PT 0 RC-033 B9.40 1-30 2"-RC-59-1502 2 PT 0 RC-033 B9.32 l-18BC 2"-RC-59-1502 2 PT 0 RC-034 B9.21 1-02 3"-RC-131-1502 3 PT 0 RC-034 B9.32 1-0!BC 3"-RC-131-1502 3 PT 0 RC-035 B9.40 1-02 3"-RC-116-1502 3 PT 0
RC-035 B9.32 1-0!BC 3"-RC-116-1502 3 PT 0 RC-036 B9.21 1-02 3"-RC-147-1502 3 PT 0 RC-036 B9.32 1-0!BC 3"-RC-147-1502 3 PT 0 RC-037 B9.40 1-03 2"-RC-198-1502 PT Rl.12 PT/Vf-2 RC-037 B9.40 1-02 2"-RC-198-1502 0 PT Rl.12 PT/VT-2 RC-037 B9.32 1-0!BC 2"-RC-198-1502 PT 0 RC-038 B9.32 1-0!BC 2"-RC-199-1502 PT 0
RC-038 B9.21 1-02 2"-RC-199-1502 0 PT Rl.12 3 PT/VT-2
-* -----------
RIIISI Plan and ASME XI Sorted by RBISI Segments, SPSU13 Database Page 32of 40 Print Date: 7129198
*
Segment
- ---
XI Item No. Mark No. Line Nwnber
- RB Method RC-038 B9.21 1-05 2"-RC-199-1502 0 PT Rl.12 3 PT/Vf-2 RC-039 B9.40 1-07 2"-RC-200-1502 3 PT Rl.12 3 PT/Vf-2 RC-039 B9.40 1-04 2"-RC-200-1502 3 PT 0 RC-039 B9.40 1-02 2"-RC-200-1502 0 PT Rl.12 3 PT/Vf-2
RC-039 B9.32 1-0IBC 2"-RC-200-1502 2 PT 0 RC-040 B9.21 1-09 2"-CH-5-1502 PT 0
----
RC-040 B9.2! 1-03 2"-CH-5-1502 PT 0 RC-040 B9.32 1-0IBC 2"-CH-5-1502 PT 0 RC-040 B9.21 1-12 2"-CH-5-1502 PT 0 RC-040 B9.21 1-05 2"-CH-5-1502 PT 0 RC-041 B9.ll 1-02 6"-RC-17-1502 0 UT/PT RI.I I 3 UT/PT RC-041 B9.ll 1-04 6"-RC-17-1502 UT/PT RI.I I UT/PT RC-041 B9.31 1-0IBC 6"-RC-17-1502 3 Uf/PT 0 RC-042 B9.31 1-0IBC 6"-RC-19-1502 3 UT/PT 0
RC-042 B9.ll 1-02 6"-RC-19-1502 0 UT/PT RI.I I 3 UT/PT
. ------*----------- -------------------------~--
RBIS! Pinn nnd ASJ\IE XI Sorted by RBIS! Segments, SPSU13 Dntnbnse Page 33 of 40 Print Date: 7129198
Segment
-- - -----*-----------
--
XI Item No.
*-------------
!\lark No.
- --------*
Line Number XI Period XI Method
====================
- RB Method RC-042 B9.ll 1-04 6"-RC-19-1502 Uf/PT RI.I I 3 Uf/PT RC-043 B9.31 1-0IBC 6"-RC-20-1502 3 Uf/PT 0
--*--------
RC-043 B9.II 1-02 6"-RC-20-1502 0 Uf/PT Rl.11 3 Uf/PT RC-043 B9.ll 1-03 6"-RC-20-1502 2 Uf/PT RI.I I 2 Uf/PT RC-044 B9.II 1-12 4"-RC-14-1502 3 Uf/PT 0
* ---------
RC-044 B9.II 1-02 4"-RC-14-1502 2 Uf/PT 0 RC-044 B9.II 1-18 4"-RC-14-1502 3 Uf/PT 0 RC-044 B9.11 1-16 4"-RC-14-1502 Uf/PT 0 RC-044 B9.II 1-14 4"-RC-14-1502 2 Uf/PT 0 RC-044 B9.ll 1-13 4"-RC-14-1502 3 Uf/PT 0 RC-044 B9.II 1-11 4"-RC-14-1502
- -----------
2 Uf/PT 0 RC-044 B9.ll 1-10 4"-RC-14-1502 Uf/PT 0
*----------
RC-044 B9.II 1-03 4"-RC-14-1502 2 UT/PT 0 RC-044 B9.31 1-0IBC 4"-RC-14-1502 2 UT/PT 0
-----------------
RC-044 B9.II 1-04 4"-RC-14-1502 2 lIT/PT 0 RBIS! Plan and ASl\lE XI Sorted by RBISI Segments, SPSUlJ Database Page 34 of 40 Print Date: 7/29/98
Segment
- RB Method RC-045 B9.II 2-09 4"-RC-15-1502 2 UT/PT 0
RC-045 B9.II 2-17A 4"-RC-15-1502 UT/PT 0 RC-045 B9.ll 2-15 4"-RC-15-1502 2 UT/PT 0 RC-045 B9.ll 2-10 4"-RC-15-1502 2 UT/PT 0 RC-045 B9.31 2-0IBC 4"-RC-15-1502 3 UT/PT 0
~----
RC-045 B9.ll 2-02 4"-RC-15-1502 UT/PT 0 RC-045 B9.II 2-08 4"-RC-15-1502 2 UT/PT 0 RC-045 B9-11 2-07 4"-RC-15-1502 UT/PT 0 RC-045 B911 2-17A(PS1) 4"-RC-15-1502 2 UT/PT 0 RC-046 B9_JJ 1-09 l 2"-RC-22-1502 3 UT/PT 0 RC-046 B9.31 1-0IBC 12"-RC-22-1502 2 UT/PT 0 RC-046 B9.ll 1-05 l 2"-RC-22-1502 2 UT/PT 0 RC-047 B9.31 1-0IBC l 2"-RC-23-1502 UT/PT 0 RC-047 B9.II 1-09 12"-RC-23-1502 2 UT/PT 0 RC-048 B9-31 1-0IBC 12"-RC-24-1502 UT/PT 0
*-------------
RIIISI Plan and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 35 of 40 Print Date: 7129/98
- - -- - - - - * - - - - - - - - - - -
Line Number XI Period XI Method RB Item No. RB Period
- RB Method Segment XI Item No. !\lark No.
==
RC-048 B9.II 1-03 12"-RC-24-1502 2 UT/PT 0 RC-048 B9.ll 1-04 12"-RC-24-1502 UT/PT 0
RC-049 B9.21 1-02 3"-CH-1-1502 3 PT 0 RC-049 B9.32 1-0IBC 3"-CH-1-1502 3 PT 0 RC-051 B5.40 2-25DM 4"-RC-15-1502 2 UT/PT 0
*----------------------- -------
RC-051 B9.ll 2-20 4"-RC-15-1502 3 UT/PT 0
RC-051 B9.ll 2-19 4"-RC-15-1502 3 Uf/PT 0 RC-051 B9.ll 2-18A (PSI) 4"-RC-15-1502 2 UT/PT 0 RC-051 B9.ll 1-20 4"-RC-14-1502 3 UT/PT 0 RC-051 B9.ll 2-26 (PSI) 4"-RC-15-1502 2 UT/PT 0
RC-051 B9.ll 2-24 4"-RC-15-1502 3 UT/PT 0
RC-052 B9.II 1-02 6"-RC-39-1502 UT/PT 0
RC-052 B5.40 1-0IDM 6"-RC-39-1502 UT/PT 0 RC-052 B9.ll 1-08 6"-RC-39-1502 2 UT/PT 0
RC-053 B9.II 2-02 6"-RC-38-1502
2 UT/PT 0
--- ------- ---------*
*--------------- ------------
RIIISI Plan and ASI\IE XI Sorted by RIIISI Segments, SPSU13 Database Page 36 of 40 Print Date: 7129198
Segment
- RB Method
--- - . -- - - - -
RC-053 B9.l l 2-08 6"-RC-38-1502 2 UT/PT 0
RC-053 85.40 2-0lDM 6"-RC-38-1502 2 UT/PT Rl.11 2 UT RC-054 B5.40 4-0lDM 6"-RC-37-1502 2 UT/PT 0 RC-054 89.11 4-02 6"-RC-37-1502 2 UT/PT 0 RC-054 B9.ll 4-08 6"-RC-37-1502 2 UT/PT 0
*----------------------
RC-057 89.32 3-07BC 3"-RC-35-1502 2 PT 0
- ----------------------*----------------*------ -----
RC-057 85.40 3-0lDM 4"-RC-34-1502 2 UT/PT 0
RC-057 89.11 3-02 4"-RC-34-1502 2 UT/PT 0 RC-058 B9.21 3-10 3"-RC-35-1502 2 PT 0 RC-058 89.40 19 3"-RC-35-1502 3 PT Rl.11 3 Uf(l)
RC-059 89.21 3-16 3"-RC-61-1502 2 PT 0 RC-059 B9.40 18 3"-RC-61-1502 0 PT Rl.1 I 3 UT(!)
RC-060A 89-32 3-0IBC 11/z-RC-105-1502 3 PT 0
RC-060A 89.40 3-05 1'h"-RC-105-1502 3 PT 0 RC-0601\ 89.40 3-07 l 1/,"-RC-105-1502
*--* *----
- - - - - - - - - *------- ------- - - - - -
RIHSI Pinn and ASI\IE XI Sorted by RBISI Segments, SPSU13 Database Page 37 of 40 Print Date: 7/29/98
Segment
- XI Item No.
!\lark No. ====~L~in~e~N~urn~b=-=e~r====~X:::::I=-=P=e:::::rl=-=od==X=I=l\=l=e=th=o=d===R=B=I=te=m=N=o=.=====R=B=P=e=n=*o=d===R=B=M=e=th=o=d===
RC-060B B9.40 3-11 l l/,"-RC-105-1502 3 PT 0 RC-061 89.40 1-04 2"-CH-68-1502 3 PT 0 RC-061 89.32 4-0IBC 2"-CH-68-1502 2 PT 0 RH-002 89.11 1-06 14"-RH-1-1502 0 Rl.16 2 lff RH-003 CS.I I 2-02 12"-RH-19-602 2 UT/PT 0
*
Rll-003 CS.II 2-07 !4"-RH-2-602 2 UT/PT 0
Rll-003 CS.II 2-03 12"-RH-12-602 3 UT/PT 0
----------------*------------***---
RH-003 CS.II 3-11 12"-RH-6-602 2 lff/PT 0
RH-003 CS.12 0-14L 12"-RH-19-602 3 UT/PT 0 Rll-003 C5.12 0-16L I 2"-RH-12-602 3 UT/PT 0
Rll-003 CS.12 0-0IL 14"-RH-18-602 UT/PT 0
RH-003 CS.II 1-45 I O"-RH-7-602 0 Rl.16 3 UT
Rll-003 CS.II 2-26 12"-RH-19-602 2 lff/PT 0
. Rll-003 CS.II 2-29 12"-RH-19-602 3 UT/PT 0
Rll-003 C5.II 2-16 10"-RH-16--1502 UT/PT 0
- ------------*** -*-----------------------
RIIISI Plan and ASl\lE XI Sorted by RBIS! Segments, SPSU13 Database Page 38of 40 Print Date: 7/29198
- -_-_::::_-_-_-_*--_:::-_.-:c-=*=-: L Segment-=_:_-::__-::==--:.::==-=~:~~~m N ~ : _ _ _ _ - - - - - - - - - ~ ~ ~ - - - - ine N b XI Period XI Method RB Item No.
um==e=r===================================
RB Period
- RB Method Rll-003 C5.I I 2-01 14"-RH-18-602 Uf/PT 0
- -----------
Rll-003 C5.12 0-13L 14"-RH-2-602 2 Uf/PT 0 Rll-003B C5.l l 2-09 6"-RH-14-602 Uf/PT Rl.16 ur RH-008 B9.ll 1-12 10"-RH-16-1502 3 Uf/PT 0 Rll-008 89.ll 1-11 10"-RH-16-1502 2 UT/PT 0
- - - - - - - - --------
Rll-008 B9.ll 2-01 10"-RH-16-1502 Uf/PT 0
-
RH-009 B9.l l 2-04 I O"-RH-17-1502 2 UT/PT 0
Rll-011 NA 3-AF 6"-RH-20-152 0 Rl.16 3 ur Rll-011 NA 1001 6"-RH-20-152 0 Rl.16 3 ur RS-003A C5.ll 1-03 12"-RS-8-153 UT/PT Rl.16 UT
RS-0038 C5.ll 1-02 l 2"-RS-8-153 UT/PT 0 RS-004A *----*-
C5.ll 1-06 12"-RS-7-153 3 Uf/PT Rl.16 3 ur
RS-004B C5.ll 1-05 12"-RS-7-153 2 UT/PT 0 SW-044 NA 1001 11h-WS-74-21X
0 RI.I I Uf (l)
*-
SW-045 NA 1002 I 1/,"-WS-75-2 IX 0 Rl.11 UT (I)
RBISI Plan and ASI\IE XI Sorted by RBIS( Segments, SPSU13 Database Page 39of 40 Print Date: 7129198
r Segment XI Item No. !\lark No. Line Number XI Period XI Method RB Item No. RB Period
- RB Method SW-046 NA 1003 I \lz-WS-450-2 IX 0 RI.I I 3 lIT (I)
*--
SW-047 NA 1004 1\lz-WS-451-21X 0 RI.I I 3 lIT(I)
SW-054 NA 1005 2"-WS-560-21X 0 Rl.J I 3 UT(!)
VS-001 NA 1001 1"-VS-23-151 0 RI.I I 3 UT(!)
VS-002 NA 1002 l'l,"-CHR-151 0 Rl.12 3 VT-2/PT
- ---------*----------------------
Record Count: 590 RIIISI Plan and ASl\1E XI Sorted by RBISI Segments, SPSU13 Database Page 40of 40 Print Date: 7129198